Estimating total maximum daily loads with the Stochastic Empirical Loading and Dilution Model

USGS Publications Warehouse

Granato, Gregory; Jones, Susan Cheung

2017-01-01

The Massachusetts Department of Transportation (DOT) and the Rhode Island DOT are assessing and addressing roadway contributions to total maximum daily loads (TMDLs). Example analyses for total nitrogen, total phosphorus, suspended sediment, and total zinc in highway runoff were done by the U.S. Geological Survey in cooperation with FHWA to simulate long-term annual loads for TMDL analyses with the stochastic empirical loading and dilution model known as SELDM. Concentration statistics from 19 highway runoff monitoring sites in Massachusetts were used with precipitation statistics from 11 long-term monitoring sites to simulate long-term pavement yields (loads per unit area). Highway sites were stratified by traffic volume or surrounding land use to calculate concentration statistics for rural roads, low-volume highways, high-volume highways, and ultraurban highways. The median of the event mean concentration statistics in each traffic volume category was used to simulate annual yields from pavement for a 29- or 30-year period. Long-term average yields for total nitrogen, phosphorus, and zinc from rural roads are lower than yields from the other categories, but yields of sediment are higher than for the low-volume highways. The average yields of the selected water quality constituents from high-volume highways are 1.35 to 2.52 times the associated yields from low-volume highways. The average yields of the selected constituents from ultraurban highways are 1.52 to 3.46 times the associated yields from high-volume highways. Example simulations indicate that both concentration reduction and flow reduction by structural best management practices are crucial for reducing runoff yields.

Contact stresses, pressure and area in a fixed-bearing total ankle replacement: a finite element analysis.

PubMed

Martinelli, Nicolo; Baretta, Silvia; Pagano, Jenny; Bianchi, Alberto; Villa, Tomaso; Casaroli, Gloria; Galbusera, Fabio

2017-11-25

Mobile-bearing ankle implants with good clinical results continued to increase the popularity of total ankle arthroplasty to address endstage ankle osteoarthritis preserving joint movement. Alternative solutions used fixed-bearing designs, which increase stability and reduce the risk of bearing dislocation, but with a theoretical increase of contact stresses leading to a higher polyethylene wear. The purpose of this study was to investigate the contact stresses, pressure and area in the polyethylene component of a new total ankle replacement with a fixed-bearing design, using 3D finite element analysis. A three-dimensional finite element model of the Zimmer Trabecular Metal Total Ankle was developed and assembled based on computed tomography images. Three different sizes of the polyethylene insert were modeled, and a finite element analysis was conducted to investigate the contact pressure, the von Mises stresses and the contact area of the polyethylene component during the stance phase of the gait cycle. The peak value of pressure was found in the anterior region of the articulating surface, where it reached 19.8 MPa at 40% of the gait cycle. The average contact pressure during the stance phase was 6.9 MPa. The maximum von Mises stress of 14.1 MPa was reached at 40% of the gait cycle in the anterior section. In the central section, the maximum von Mises stress of 10.8 MPa was reached at 37% of the gait cycle, whereas in the posterior section the maximum stress of 5.4 MPa was reached at the end of the stance phase. The new fixed-bearing total ankle replacement showed a safe mechanical behavior and many clinical advantages. However, advanced models to quantitatively estimate the wear are need. To the light of the clinical advantages, we conclude that the presented prosthesis is a good alternative to the other products present in the market.

Vehicle Scheduling Schemes for Commercial and Emergency Logistics Integration

PubMed Central

Li, Xiaohui; Tan, Qingmei

2013-01-01

In modern logistics operations, large-scale logistics companies, besides active participation in profit-seeking commercial business, also play an essential role during an emergency relief process by dispatching urgently-required materials to disaster-affected areas. Therefore, an issue has been widely addressed by logistics practitioners and caught researchers' more attention as to how the logistics companies achieve maximum commercial profit on condition that emergency tasks are effectively and performed satisfactorily. In this paper, two vehicle scheduling models are proposed to solve the problem. One is a prediction-related scheme, which predicts the amounts of disaster-relief materials and commercial business and then accepts the business that will generate maximum profits; the other is a priority-directed scheme, which, firstly groups commercial and emergency business according to priority grades and then schedules both types of business jointly and simultaneously by arriving at the maximum priority in total. Moreover, computer-based simulations are carried out to evaluate the performance of these two models by comparing them with two traditional disaster-relief tactics in China. The results testify the feasibility and effectiveness of the proposed models. PMID:24391724

Vehicle scheduling schemes for commercial and emergency logistics integration.

PubMed

Li, Xiaohui; Tan, Qingmei

2013-01-01

In modern logistics operations, large-scale logistics companies, besides active participation in profit-seeking commercial business, also play an essential role during an emergency relief process by dispatching urgently-required materials to disaster-affected areas. Therefore, an issue has been widely addressed by logistics practitioners and caught researchers' more attention as to how the logistics companies achieve maximum commercial profit on condition that emergency tasks are effectively and performed satisfactorily. In this paper, two vehicle scheduling models are proposed to solve the problem. One is a prediction-related scheme, which predicts the amounts of disaster-relief materials and commercial business and then accepts the business that will generate maximum profits; the other is a priority-directed scheme, which, firstly groups commercial and emergency business according to priority grades and then schedules both types of business jointly and simultaneously by arriving at the maximum priority in total. Moreover, computer-based simulations are carried out to evaluate the performance of these two models by comparing them with two traditional disaster-relief tactics in China. The results testify the feasibility and effectiveness of the proposed models.

Los Angeles Area Permit Holder Estimated Trash Load Reduction

EPA Pesticide Factsheets

The Los Angeles River has been designated as an impaired waterbody due to the large volume of trash it receives from the watershed. To address this problem a Total Maximum Daily Load (TMDL), which establishes baseline trash loads to the river from the watershed, has been incorporated into the area stormwater permit. The permit requires each permittee to implement trash reduction measures for discharges through the storm drain system with an emphasis on the installation of full capture devices. The stormwater permit incorporates progressive reductions in trash discharges to the Los Angeles River, reaching a zero level in 2016.

Microbiological Quality of Panicum maximum Grass Silage with Addition of Lactobacillus sp. as Starter

NASA Astrophysics Data System (ADS)

Sumarsih, S.; Sulistiyanto, B.; Utama, C. S.

2018-02-01

The aim of the research was to evaluate microbiological quality of Panicum maximum grass silage with addition Lactobacillus sp as starter. The completely randomized design was been used on this research with 4 treaments and 3 replications. The treatments were P0 ( Panicum maximum grass silage without addition Lactobacillus sp ), P1 ( Panicum maximum grass silage with 2% addition Lactobacillus sp), P2 (Panicum maximum grass silage with 4% addition Lactobacillus sp) and P3 (Panicum maximum grass silage with 6% addition Lactobacillus sp).The parameters were microbial populations of Panicum maximum grass silage (total lactic acid bacteria, total bacteria, total fungi, and Coliform bacteria. The data obtained were analyzed variance (ANOVA) and further tests performed Duncan’s Multiple Areas. The population of lactic acid bacteria was higher (P<0.05) and the total bacteria, fungi and Coliform were lower (P<0.05) with addition Lactobacillus sp. Microbiological quality of Panicum maximum grass silage with addition Lactobacillus sp was better than no addition Lactobacillus sp.

Effect of acoustic frequency and power density on the aqueous ultrasonic-assisted extraction of grape pomace (Vitis vinifera L.) - a response surface approach.

PubMed

González-Centeno, María Reyes; Knoerzer, Kai; Sabarez, Henry; Simal, Susana; Rosselló, Carmen; Femenia, Antoni

2014-11-01

Aqueous ultrasound-assisted extraction (UAE) of grape pomace was investigated by Response Surface Methodology (RSM) to evaluate the effect of acoustic frequency (40, 80, 120kHz), ultrasonic power density (50, 100, 150W/L) and extraction time (5, 15, 25min) on total phenolics, total flavonols and antioxidant capacity. All the process variables showed a significant effect on the aqueous UAE of grape pomace (p<0.05). The Box-Behnken Design (BBD) generated satisfactory mathematical models which accurately explain the behavior of the system; allowing to predict both the extraction yield of phenolic and flavonol compounds, and also the antioxidant capacity of the grape pomace extracts. The optimal UAE conditions for all response factors were a frequency of 40kHz, a power density of 150W/L and 25min of extraction time. Under these conditions, the aqueous UAE would achieve a maximum of 32.31mg GA/100g fw for total phenolics and 2.04mg quercetin/100g fw for total flavonols. Regarding the antioxidant capacity, the maximum predicted values were 53.47 and 43.66mg Trolox/100g fw for CUPRAC and FRAP assays, respectively. When comparing with organic UAE, in the present research, from 12% to 38% of total phenolic bibliographic values were obtained, but using only water as the extraction solvent, and applying lower temperatures and shorter extraction times. To the best of the authors' knowledge, no studies specifically addressing the optimization of both acoustic frequency and power density during aqueous-UAE of plant materials have been previously published. Copyright © 2014 Elsevier B.V. All rights reserved.

7 CFR 51.1178 - Maximum anhydrous citric acid permissible for corresponding total soluble solids.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Maximum anhydrous citric acid permissible for... Sinensis (l) Osbeck) § 51.1178 Maximum anhydrous citric acid permissible for corresponding total soluble solids. For determining the grade of juice, the maximum permissible anhydrous citric acid content in...

7 CFR 51.1178 - Maximum anhydrous citric acid permissible for corresponding total soluble solids.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Maximum anhydrous citric acid permissible for... Sinensis (l) Osbeck) § 51.1178 Maximum anhydrous citric acid permissible for corresponding total soluble solids. For determining the grade of juice, the maximum permissible anhydrous citric acid content in...

User’s manual to update the National Wildlife Refuge System Water Quality Information System (WQIS)

USGS Publications Warehouse

Chojnacki, Kimberly A.; Vishy, Chad J.; Hinck, Jo Ellen; Finger, Susan E.; Higgins, Michael J.; Kilbride, Kevin

2013-01-01

National Wildlife Refuges may have impaired water quality resulting from historic and current land uses, upstream sources, and aerial pollutant deposition. National Wildlife Refuge staff have limited time available to identify and evaluate potential water quality issues. As a result, water quality–related issues may not be resolved until a problem has already arisen. The National Wildlife Refuge System Water Quality Information System (WQIS) is a relational database developed for use by U.S. Fish and Wildlife Service staff to identify existing water quality issues on refuges in the United States. The WQIS database relies on a geospatial overlay analysis of data layers for ownership, streams and water quality. The WQIS provides summary statistics of 303(d) impaired waters and total maximum daily loads for the National Wildlife Refuge System at the national, regional, and refuge level. The WQIS allows U.S. Fish and Wildlife Service staff to be proactive in addressing water quality issues by identifying and understanding the current extent and nature of 303(d) impaired waters and subsequent total maximum daily loads. Water quality data are updated bi-annually, making it necessary to refresh the WQIS to maintain up-to-date information. This manual outlines the steps necessary to update the data and reports in the WQIS.

Chapter 11.2: Inverters, Power Optimizers, and Microinverters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deline, Christopher A

Inverters span a wide range of sizes, topologies, and connection voltages: from utility-scale megawatt inverters to string inverters. Switch-mode power conversion relies on high frequency chopping of DC signal to periodically charge and discharge energy storage elements, such as inductors and capacitors. Additional circuit components are required to address practical issues in inverters such as voltage ripple and harmonic distortion. Inverters are beginning to incorporate components with a bandgap above should be 3 eV, such as SiC and GaN. Photovoltaic (PV) modules respond dynamically to changing temperature and irradiation conditions. Thus, maximum DC power extraction requires periodic adjustment of themore » PV voltage and current operating point. An inverter's total efficiency is measured by the product of its conversion efficiency and the maximum-power-point tracking (MPPT) efficiency. This chapter lists the primary functions of inverters that include auxiliary capabilities, such as monitoring of DC and AC performance, and other error reporting.« less

Some single-machine scheduling problems with learning effects and two competing agents.

PubMed

Li, Hongjie; Li, Zeyuan; Yin, Yunqiang

2014-01-01

This study considers a scheduling environment in which there are two agents and a set of jobs, each of which belongs to one of the two agents and its actual processing time is defined as a decreasing linear function of its starting time. Each of the two agents competes to process its respective jobs on a single machine and has its own scheduling objective to optimize. The objective is to assign the jobs so that the resulting schedule performs well with respect to the objectives of both agents. The objective functions addressed in this study include the maximum cost, the total weighted completion time, and the discounted total weighted completion time. We investigate three problems arising from different combinations of the objectives of the two agents. The computational complexity of the problems is discussed and solution algorithms where possible are presented.

Incorporating uncertainty in watershed management decision-making: A mercury TMDL case study

USGS Publications Warehouse

Labiosa, W.; Leckie, J.; Shachter, R.; Freyberg, D.; Rytuba, J.; ,

2005-01-01

Water quality impairment due to high mercury fish tissue concentrations and high mercury aqueous concentrations is a widespread problem in several sub-watersheds that are major sources of mercury to the San Francisco Bay. Several mercury Total Maximum Daily Load regulations are currently being developed to address this problem. Decisions about control strategies are being made despite very large uncertainties about current mercury loading behavior, relationships between total mercury loading and methyl mercury formation, and relationships between potential controls and mercury fish tissue levels. To deal with the issues of very large uncertainties, data limitations, knowledge gaps, and very limited State agency resources, this work proposes a decision analytical alternative for mercury TMDL decision support. The proposed probabilistic decision model is Bayesian in nature and is fully compatible with a "learning while doing" adaptive management approach. Strategy evaluation, sensitivity analysis, and information collection prioritization are examples of analyses that can be performed using this approach.

Active Flexion in Weight Bearing Better Correlates with Functional Outcomes of Total Knee Arthroplasty than Passive Flexion.

PubMed

Song, Young Dong; Jain, Nimash; Kang, Yeon Gwi; Kim, Tae Yune; Kim, Tae Kyun

2016-06-01

Correlations between maximum flexion and functional outcomes in total knee arthroplasty (TKA) patients are reportedly weak. We investigated whether there are differences between passive maximum flexion in nonweight bearing and other types of maximum flexion and whether the type of maximum flexion correlates with functional outcomes. A total of 210 patients (359 knees) underwent preoperative evaluation and postoperative follow-up evaluations (6, 12, and 24 months) for the assessment of clinical outcomes including maximum knee flexion. Maximum flexion was measured under five conditions: passive nonweight bearing, passive weight bearing, active nonweight bearing, and active weight bearing with or without arm support. Data were analyzed for relationships between passive maximum flexion in nonweight bearing by Pearson correlation analyses, and a variance comparison between measurement techniques via paired t test. We observed substantial differences between passive maximum flexion in nonweight bearing and the other four maximum flexion types. At all time points, passive maximum flexion in nonweight bearing correlated poorly with active maximum flexion in weight bearing with or without arm support. Active maximum flexion in weight bearing better correlated with functional outcomes than the other maximum flexion types. Our study suggests active maximum flexion in weight bearing should be reported together with passive maximum flexion in nonweight bearing in research on the knee motion arc after TKA.

Active Flexion in Weight Bearing Better Correlates with Functional Outcomes of Total Knee Arthroplasty than Passive Flexion

PubMed Central

Song, Young Dong; Jain, Nimash; Kang, Yeon Gwi; Kim, Tae Yune

2016-01-01

Purpose Correlations between maximum flexion and functional outcomes in total knee arthroplasty (TKA) patients are reportedly weak. We investigated whether there are differences between passive maximum flexion in nonweight bearing and other types of maximum flexion and whether the type of maximum flexion correlates with functional outcomes. Materials and Methods A total of 210 patients (359 knees) underwent preoperative evaluation and postoperative follow-up evaluations (6, 12, and 24 months) for the assessment of clinical outcomes including maximum knee flexion. Maximum flexion was measured under five conditions: passive nonweight bearing, passive weight bearing, active nonweight bearing, and active weight bearing with or without arm support. Data were analyzed for relationships between passive maximum flexion in nonweight bearing by Pearson correlation analyses, and a variance comparison between measurement techniques via paired t test. Results We observed substantial differences between passive maximum flexion in nonweight bearing and the other four maximum flexion types. At all time points, passive maximum flexion in nonweight bearing correlated poorly with active maximum flexion in weight bearing with or without arm support. Active maximum flexion in weight bearing better correlated with functional outcomes than the other maximum flexion types. Conclusions Our study suggests active maximum flexion in weight bearing should be reported together with passive maximum flexion in nonweight bearing in research on the knee motion arc after TKA. PMID:27274468

Insights gained from relating cumulative seismic moments to fluid injection activities

NASA Astrophysics Data System (ADS)

McGarr, A.; Barbour, A. J.

2017-12-01

The three earthquakes with magnitudes of 5 or greater that were induced in Oklahoma during 2016 motivated efforts to improve our understanding of how fluid injection operations are related to earthquake activity. In this study, we have addressed the question of whether the volume of fluid injected down wells within 10 km of the mainshock of an induced earthquake sequence can account for its total moment release. Specifically, is the total moment release equal to, or less than, twice the product of the shear modulus and the total volume injected (McGarr, JGR, 2014, equation 7)? In contrast to McGarr's (2014, equation 13) relationship for the maximum moment, M0(max), the relationship for the total moment release has the advantage of being independent of the magnitude distribution. We find that the three sequences in Oklahoma in 2016, M5.1 Fairview, M5.8 Pawnee, M5.0 Cushing, and the 2011 M5.7 Prague sequence all adhere to this relationship. We also found that eight additional sequences of earthquakes induced by various fluid injection activities, widely distributed worldwide, show the same relationship between total moment-release and injected volume. Thus, for injected volumes ranging from 103 up to 107 cubic m, the moment release of an induced earthquake sequence appears to be similarly limited. These results imply that M0(max) for a sequence induced by fluid injection could be as high as twice the product of the shear modulus and the injected volume if the mainshock in the sequence accounts for nearly all of the total moment, as was the case for the 2016 Pawnee M5.8 mainshock. This new upper bound for maximum moment is twice what was proposed by McGarr (2014, equation 13). Our new results also support the assumption in our analysis that the induced earthquake rupture is localized to the seismogenic region that is weakened owing to a pore pressure increase of the order of a seismic stress drop.

7 CFR 51.1178 - Maximum anhydrous citric acid permissible for corresponding total soluble solids.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Maximum anhydrous citric acid permissible for... Common Sweet Oranges (citrus Sinensis (l) Osbeck) § 51.1178 Maximum anhydrous citric acid permissible for... following Table II together with the minimum ratio of total soluble solids to anhydrous citric acid: Table...

7 CFR 51.1178 - Maximum anhydrous citric acid permissible for corresponding total soluble solids.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Maximum anhydrous citric acid permissible for... Common Sweet Oranges (citrus Sinensis (l) Osbeck) § 51.1178 Maximum anhydrous citric acid permissible for... following Table II together with the minimum ratio of total soluble solids to anhydrous citric acid: Table...

Evaluation of pliers' grip spans in the maximum gripping task and sub-maximum cutting task.

PubMed

Kim, Dae-Min; Kong, Yong-Ku

2016-12-01

A total of 25 males participated to investigate the effects of the grip spans of pliers on the total grip force, individual finger forces and muscle activities in the maximum gripping task and wire-cutting tasks. In the maximum gripping task, results showed that the 50-mm grip span had significantly higher total grip strength than the other grip spans. In the cutting task, the 50-mm grip span also showed significantly higher grip strength than the 65-mm and 80-mm grip spans, whereas the muscle activities showed a higher value at 80-mm grip span. The ratios of cutting force to maximum grip strength were also investigated. Ratios of 30.3%, 31.3% and 41.3% were obtained by grip spans of 50-mm, 65-mm, and 80-mm, respectively. Thus, the 50-mm grip span for pliers might be recommended to provide maximum exertion in gripping tasks, as well as lower maximum-cutting force ratios in the cutting tasks.

Identification and Prioritization of Management Practices to Reduce Methylmercury Exports from Wetlands and Irrigated Agricultural Lands

NASA Astrophysics Data System (ADS)

McCord, Stephen A.; Heim, Wesley A.

2015-03-01

The Sacramento-San Joaquin Delta's (Delta) beneficial uses for humans and wildlife are impaired by elevated methylmercury (MeHg) concentrations in fish. MeHg is a neurotoxin that bioaccumulates in aquatic food webs. The total maximum daily load (TMDL) implementation plan aimed at reducing MeHg in Delta fish obligates dischargers to conduct MeHg control studies. Over 150 stakeholders collaborated to identify 24 management practices (MPs) addressing MeHg nonpoint sources (NPS) in three categories: biogeochemistry (6), hydrology (14), and soil/vegetation (4). Land uses were divided into six categories: permanently and seasonally flooded wetlands, flooded and irrigated agricultural lands, floodplains, and brackish-fresh tidal marshes. Stakeholders scored MPs based on seven criteria: scientific certainty, costs, MeHg reduction potential, spatial applicability, technical capacity to implement, negative impacts to beneficial uses, and conflicting requirements. Semi-quantitative scoring for MPs applicable to each land use (totaling >400 individual scores) led to consensus-based prioritization. This process relied on practical experience from diverse and accomplished NPS stakeholders and synthesis of 17 previous studies. Results provide a comprehensive, stakeholder-driven prioritization of MPs for wetland and irrigated agricultural land managers. Final prioritization highlights the most promising MPs for practical application and control study, and a secondary set of MPs warranting further evaluation. MPs that address hydrology and soil/vegetation were prioritized because experiences were positive and implementation appeared more feasible. MeHg control studies will need to address the TMDL conundrum that MPs effective at reducing MeHg exports could both exacerbate MeHg exposure and contend with other management objectives on site.

Linking trading ratio with TMDL (total maximum daily load) allocation matrix and uncertainty analysis.

PubMed

Zhang, H X

2008-01-01

An innovative approach for total maximum daily load (TMDL) allocation and implementation is the watershed-based pollutant trading. Given the inherent scientific uncertainty for the tradeoffs between point and nonpoint sources, setting of trading ratios can be a contentious issue and was already listed as an obstacle by several pollutant trading programs. One of the fundamental reasons that a trading ratio is often set higher (e.g. greater than 2) is to allow for uncertainty in the level of control needed to attain water quality standards, and to provide a buffer in case traded reductions are less effective than expected. However, most of the available studies did not provide an approach to explicitly address the determination of trading ratio. Uncertainty analysis has rarely been linked to determination of trading ratio.This paper presents a practical methodology in estimating "equivalent trading ratio (ETR)" and links uncertainty analysis with trading ratio determination from TMDL allocation process. Determination of ETR can provide a preliminary evaluation of "tradeoffs" between various combination of point and nonpoint source control strategies on ambient water quality improvement. A greater portion of NPS load reduction in overall TMDL load reduction generally correlates with greater uncertainty and thus requires greater trading ratio. The rigorous quantification of trading ratio will enhance the scientific basis and thus public perception for more informed decision in overall watershed-based pollutant trading program. (c) IWA Publishing 2008.

42 CFR 57.307 - Maximum amount of nursing student loans.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Maximum amount of nursing student loans. 57.307... Nursing Student Loans § 57.307 Maximum amount of nursing student loans. The total of the nursing student... longer than the 9-month academic year may be proportionately increased. The total of all nursing student...

42 CFR 57.307 - Maximum amount of nursing student loans.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Maximum amount of nursing student loans. 57.307... Nursing Student Loans § 57.307 Maximum amount of nursing student loans. The total of the nursing student... longer than the 9-month academic year may be proportionately increased. The total of all nursing student...

42 CFR 57.307 - Maximum amount of nursing student loans.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 1 2013-10-01 2013-10-01 false Maximum amount of nursing student loans. 57.307... Nursing Student Loans § 57.307 Maximum amount of nursing student loans. The total of the nursing student... longer than the 9-month academic year may be proportionately increased. The total of all nursing student...

42 CFR 57.307 - Maximum amount of nursing student loans.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 1 2012-10-01 2012-10-01 false Maximum amount of nursing student loans. 57.307... Nursing Student Loans § 57.307 Maximum amount of nursing student loans. The total of the nursing student... longer than the 9-month academic year may be proportionately increased. The total of all nursing student...

42 CFR 57.307 - Maximum amount of nursing student loans.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 1 2014-10-01 2014-10-01 false Maximum amount of nursing student loans. 57.307... Nursing Student Loans § 57.307 Maximum amount of nursing student loans. The total of the nursing student... longer than the 9-month academic year may be proportionately increased. The total of all nursing student...

Design and Implementation of High Performance Content-Addressable Memories.

DTIC Science & Technology

1985-12-01

content addressability and two basic implementations of content addressing. The need and application of hardware CAM is presented to motivate the " topic...3r Pass 4th Ps4 Pass Figure 2.15 Maximum SearchUsing All-Parallel CAM - left-most position (the most significant bit) and the other IF bits are zeros

Soldiers and Statesmen: Civil Military Case Studies of the NATO Decision-Making Process.

DTIC Science & Technology

1998-06-01

5. FUNDING NUMBERS 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Naval Postgraduate School Monterey, CA 93943-5000 8. PERFORMING... ORGANIZATION REPORT NUMBER 9. SPONSORING / MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSORING/ MONITORING AGENCY REPORT NUMBER 11. SUPPLEMENTARY...ABSTRACT (maximum 200 words) The North Atlantic Treaty Organization was organized on a two-track structure. The military part of the Alliance was to be

40 CFR 130.7 - Total maximum daily loads (TMDL) and individual water quality-based effluent limitations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Total maximum daily loads (TMDL) and individual water quality-based effluent limitations. 130.7 Section 130.7 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY PLANNING AND MANAGEMENT § 130.7 Total...

40 CFR 130.7 - Total maximum daily loads (TMDL) and individual water quality-based effluent limitations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 22 2011-07-01 2011-07-01 false Total maximum daily loads (TMDL) and individual water quality-based effluent limitations. 130.7 Section 130.7 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY PLANNING AND MANAGEMENT § 130.7 Total...

Evaluation of a standard test method for total hemispherical emittance of surfaces from 293K to 1673K

NASA Technical Reports Server (NTRS)

Compton, E. C.

1986-01-01

Emittance tests were made on samples of Rene' 41, Haynes 188, and Inconel 625 superalloy metals in an evaluation of a standard test method for determining total hemispherical emittances of surfaces from 293 K to 1673 K. The intent of this evaluation was to address any problems encountered, check repeatability of measured emittances, and gain experience in use of the test procedure. Five test specimens were fabricated to prescribe test dimensions and surfaces cleaned of oil and residue. Three of these specimens were without oxidized surfaces and two with oxidized surfaces. The oxidized specimens were Rene' 41 and Haynes 188. The tests were conducted in a vacuum where the samples were resistance-heated to various temperature levels ranging from 503 K to 1293 K. The calculated results for emittance, in the worst case, were repeatable to a maximum spread to + or - 4% from the mean of five sets of plotted data for each specimen.

Iterated greedy algorithms to minimize the total family flow time for job-shop scheduling with job families and sequence-dependent set-ups

NASA Astrophysics Data System (ADS)

Kim, Ji-Su; Park, Jung-Hyeon; Lee, Dong-Ho

2017-10-01

This study addresses a variant of job-shop scheduling in which jobs are grouped into job families, but they are processed individually. The problem can be found in various industrial systems, especially in reprocessing shops of remanufacturing systems. If the reprocessing shop is a job-shop type and has the component-matching requirements, it can be regarded as a job shop with job families since the components of a product constitute a job family. In particular, sequence-dependent set-ups in which set-up time depends on the job just completed and the next job to be processed are also considered. The objective is to minimize the total family flow time, i.e. the maximum among the completion times of the jobs within a job family. A mixed-integer programming model is developed and two iterated greedy algorithms with different local search methods are proposed. Computational experiments were conducted on modified benchmark instances and the results are reported.

Maximum dose rate is a determinant of hypothyroidism after 131I therapy of Graves' disease but the total thyroid absorbed dose is not.

PubMed

Krohn, Thomas; Hänscheid, Heribert; Müller, Berthold; Behrendt, Florian F; Heinzel, Alexander; Mottaghy, Felix M; Verburg, Frederik A

2014-11-01

The determinants of successful (131)I therapy of Graves' disease (GD) are unclear. To relate dosimetry parameters to outcome of therapy to identify significant determinants eu- and/or hypothyroidism after (131)I therapy in patients with GD. A retrospective study in which 206 Patients with GD treated in University Hospital between November 1999 and January 2011. All received (131)I therapy aiming at a total absorbed dose to the thyroid of 250 Gy based on pre-therapeutic dosimetry. Post-therapy dosimetric thyroid measurements were performed twice daily until discharge. From these measurements, thyroid (131)I half-life, the total thyroid absorbed dose, and the maximum dose rate after (131)I administration were calculated. In all, 48.5% of patients were hypothyroid and 28.6% of patients were euthyroid after (131)I therapy. In univariate analysis, nonhyperthyroid and hyperthyroid patients only differed by sex. A lower thyroid mass, a higher activity per gram thyroid tissue, a shorter effective thyroidal (131)I half-life, and a higher maximum dose rate, but not the total thyroid absorbed dose, were significantly associated with hypothyroidism. In multivariate analysis, the maximum dose rate remained the only significant determinant of hypothyroidism (P < .001). Maximum dose rates of 2.2 Gy/h and higher were associated with a 100% hypothyroidism rate. Not the total thyroid absorbed dose, but the maximum dose rate is a determinant of successfully achieving hypothyroidism in Graves' disease. Dosimetric concepts aiming at a specific total thyroid absorbed dose will therefore require reconsideration if our data are confirmed prospectively.

Computing the Distribution of Pareto Sums Using Laplace Transformation and Stehfest Inversion

NASA Astrophysics Data System (ADS)

Harris, C. K.; Bourne, S. J.

2017-05-01

In statistical seismology, the properties of distributions of total seismic moment are important for constraining seismological models, such as the strain partitioning model (Bourne et al. J Geophys Res Solid Earth 119(12): 8991-9015, 2014). This work was motivated by the need to develop appropriate seismological models for the Groningen gas field in the northeastern Netherlands, in order to address the issue of production-induced seismicity. The total seismic moment is the sum of the moments of individual seismic events, which in common with many other natural processes, are governed by Pareto or "power law" distributions. The maximum possible moment for an induced seismic event can be constrained by geomechanical considerations, but rather poorly, and for Groningen it cannot be reliably inferred from the frequency distribution of moment magnitude pertaining to the catalogue of observed events. In such cases it is usual to work with the simplest form of the Pareto distribution without an upper bound, and we follow the same approach here. In the case of seismicity, the exponent β appearing in the power-law relation is small enough for the variance of the unbounded Pareto distribution to be infinite, which renders standard statistical methods concerning sums of statistical variables, based on the central limit theorem, inapplicable. Determinations of the properties of sums of moderate to large numbers of Pareto-distributed variables with infinite variance have traditionally been addressed using intensive Monte Carlo simulations. This paper presents a novel method for accurate determination of the properties of such sums that is accurate, fast and easily implemented, and is applicable to Pareto-distributed variables for which the power-law exponent β lies within the interval [0, 1]. It is based on shifting the original variables so that a non-zero density is obtained exclusively for non-negative values of the parameter and is identically zero elsewhere, a property that is shared by the sum of an arbitrary number of such variables. The technique involves applying the Laplace transform to the normalized sum (which is simply the product of the Laplace transforms of the densities of the individual variables, with a suitable scaling of the Laplace variable), and then inverting it numerically using the Gaver-Stehfest algorithm. After validating the method using a number of test cases, it was applied to address the distribution of total seismic moment, and the quantiles computed for various numbers of seismic events were compared with those obtained in the literature using Monte Carlo simulation. Excellent agreement was obtained. As an application, the method was applied to the evolution of total seismic moment released by tremors due to gas production in the Groningen gas field in the northeastern Netherlands. The speed, accuracy and ease of implementation of the method allows the development of accurate correlations for constraining statistical seismological models using, for example, the maximum-likelihood method. It should also be of value in other natural processes governed by Pareto distributions with exponent less than unity.

77 FR 18809 - Clean Water Act Section 303(d): Proposed Withdrawal of Nine Total Maximum Daily Loads (TMDLs)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-28

... withdrawal of nine final Total Maximum Daily Loads (TMDLs) for Chloride, Sulfate, and Total Dissolved Solids... 08040202-006 Bayou de L'Outre.... Chloride, Sulfate, TDS. 08040202-007 Bayou de L'Outre.... Chloride, Sulfate, TDS. 08040202-008 Bayou de L'Outre.... Chloride, Sulfate, TDS. The 2008 Arkansas Clean Water Act...

Report: Total Maximum Daily Load Program Needs Better Data and Measures to Demonstrate Environmental Results

EPA Pesticide Factsheets

Report #2007-P-00036, September 19, 2007. EPA does not have comprehensive information on the outcomes of the Total Maximum Daily Load (TMDL) program nationwide, nor national data on TMDL implementation activities.

24 CFR 941.306 - Maximum project cost.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 4 2012-04-01 2012-04-01 false Maximum project cost. 941.306... DEVELOPMENT PUBLIC HOUSING DEVELOPMENT Application and Proposal § 941.306 Maximum project cost. (a) Calculation of maximum project cost. The maximum project cost represents the total amount of public housing...

24 CFR 941.306 - Maximum project cost.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 4 2013-04-01 2013-04-01 false Maximum project cost. 941.306... DEVELOPMENT PUBLIC HOUSING DEVELOPMENT Application and Proposal § 941.306 Maximum project cost. (a) Calculation of maximum project cost. The maximum project cost represents the total amount of public housing...

[Biomechanical analysis on healing process of sagittal fracture of the mandibular condyle after rigid fixation].

PubMed

Jing, Jie; Qu, Ai-li; Ding, Xiao-mei; Hei, Yu-na

2015-04-01

To analyze the biomechanical healing process on rigid fixation of sagittal fracture of the mandibular condyle (SFMC), and to provide guidelines for surgical treatment. Three-dimensional finite element model (3D-FEAM) of mandible and condyle was established. The right condyle was simulated as SFMC with 0.1 mm space across the condyle length ways. The 3D-FEAM of rigid fixation was established. The biomechanical factors such as stress distribution of condylar surface, displacement around fracture, stress on the plate and stress shielding were calculated during 0, 4, 8 and 12-week after rigid fixation. The maximum equivalent stress of normal condyle was located at the area of middle 1/3 of condylar neck. The maximum equivalent stress at 0-week after fixation was 23 times than that on normal condyle. They were located at the condylar stump and the plate near inferior punctual areas of fracture line. There were little stress on the other areas. The maximum equivalent stress at 4, 8 and 12-week was approximately 6 times than that on normal condyle. They were located at the areas same as the area at 0-week. There were little stress on the other areas at the condyle. The maximum total displacement and maximum total corner were increased 0.57-0.75 mm and 0.01-0.09° respectively during healing process. The maximum equivalent stress at 0-week on the condylar trump was 5-6 times compared with that at 4, 8, and 12-week. The maximum equivalent stress, maximum total displacement and maximum total corner on the fractured fragment were not changed significantly during healing process. The maximum equivalent stress at 0-week on the plate was 7-9 times compared with that at 4, 8, 12-week. The stress of the condyle and stress shielding of the plate may be the reasons of absorbing and rebuilding on the condyle in healing process of SFMC. The biomechanical parameters increase obviously at 4-week after fixation. Elastic intermaxillary traction is necessary to decrease total displacement and total corner of the condyle, and liquid diet is necessary to decrease equivalent stress within 4 weeks. Rehabilitation training should be used to recover TMJ functions after 4 weeks because the condyle and mandible have the ability to carry out normal functions.

Integrating Salmon Recovery, Clean Water Act Compliance ...

EPA Pesticide Factsheets

"The South Fork Nooksack River (SFNR) is an important tributary to the Nooksack River, Bellingham Bay, and the Salish Sea. The South Fork Nooksack River comprises one of the 22 independent populations of spring Chinook in the Puget Sound Chinook Evolutionarily Significant Unit (ESU), which are listed as threatened under the Endangered Species Act (ESA). The population is considered essential for recovery of the ESU. The SFNR has suffered from legacy impacts, temperature exceedances and fine sediment, due to forestry, agriculture, flood control, and transportation facilities. The temperature exceedances threaten spring Chinook salmon survival and as such under the Clean Water Act, this pollution must be addressed through a total maximum daily load (TMDL) regulatory program. Further, climate change is projected to cumulatively add to the existing legacy impacts. Millions of dollars are spent on salmon habitat restoration in the SFNR that primarily addresses these legacy impacts, but few if any restoration actions take climate change into direct consideration. The Nooksack Indian Tribe and USEPA-ORD jointly completed a climate change pilot research project that addresses legacy impacts, ESA recovery actions, CWA regulatory compliance, and salmon habitat restoration in one comprehensive project. The project evaluates how land use impacts, including altered hydrology, stream temperature, sediment dynamics, and flooding of adjacent river floodplains, combined with pr

40 CFR 1065.710 - Gasoline.

Code of Federal Regulations, 2010 CFR

2010-07-01

...: Initial boiling point °C 24-35 2 24-36 10% point °C 49-57 37-48 ASTM D86-07a. 50% point °C 93-110 82-101... m3/m3 Maximum, 0.10 Maximum, 0.175 ASTM D1319-03. Aromatics Maximum, 0.35 Maximum, 0.304 Saturates.../liter Maximum, 0.0013 Maximum, 0.005 ASTM D3231-07. Total sulfur mg/kg Maximum, 80 Maximum, 80 ASTM...

A modified ATI technique for nowcasting convective rain volumes over areas. [area-time integrals

NASA Technical Reports Server (NTRS)

Makarau, Amos; Johnson, L. Ronald; Doneaud, Andre A.

1988-01-01

This paper explores the applicability of the area-time-integral (ATI) technique for the estimation of the growth portion only of a convective storm (while the rain volume is computed using the entire life history of the event) and for nowcasting the total rain volume of a convective system at the stage of its maximum development. For these purposes, the ATIs were computed from the digital radar data (for 1981-1982) from the North Dakota Cloud Modification Project, using the maximum echo area (ATIA) no less than 25 dBz, the maximum reflectivity, and the maximum echo height as the end of the growth portion of the convective event. Linear regression analysis demonstrated that correlations between total rain volume or the maximum rain volume versus ATIA were the strongest. The uncertainties obtained were comparable to the uncertainties which typically occur in rain volume estimates obtained from radar data employing Z-R conversion followed by space and time integration. This demonstrates that the total rain volume of a storm can be nowcasted at its maximum stage of development.

Detector-specific correction factors in radiosurgery beams and their impact on dose distribution calculations.

PubMed

García-Garduño, Olivia A; Rodríguez-Ávila, Manuel A; Lárraga-Gutiérrez, José M

2018-01-01

Silicon-diode-based detectors are commonly used for the dosimetry of small radiotherapy beams due to their relatively small volumes and high sensitivity to ionizing radiation. Nevertheless, silicon-diode-based detectors tend to over-respond in small fields because of their high density relative to water. For that reason, detector-specific beam correction factors ([Formula: see text]) have been recommended not only to correct the total scatter factors but also to correct the tissue maximum and off-axis ratios. However, the application of [Formula: see text] to in-depth and off-axis locations has not been studied. The goal of this work is to address the impact of the correction factors on the calculated dose distribution in static non-conventional photon beams (specifically, in stereotactic radiosurgery with circular collimators). To achieve this goal, the total scatter factors, tissue maximum, and off-axis ratios were measured with a stereotactic field diode for 4.0-, 10.0-, and 20.0-mm circular collimators. The irradiation was performed with a Novalis® linear accelerator using a 6-MV photon beam. The detector-specific correction factors were calculated and applied to the experimental dosimetry data for in-depth and off-axis locations. The corrected and uncorrected dosimetry data were used to commission a treatment planning system for radiosurgery planning. Various plans were calculated with simulated lesions using the uncorrected and corrected dosimetry. The resulting dose calculations were compared using the gamma index test with several criteria. The results of this work presented important conclusions for the use of detector-specific beam correction factors ([Formula: see text] in a treatment planning system. The use of [Formula: see text] for total scatter factors has an important impact on monitor unit calculation. On the contrary, the use of [Formula: see text] for tissue-maximum and off-axis ratios has not an important impact on the dose distribution calculation by the treatment planning system. This conclusion is only valid for the combination of treatment planning system, detector, and correction factors used in this work; however, this technique can be applied to other treatment planning systems, detectors, and correction factors.

Analysis of ionospheric irregularities during total solar eclipse 2016 based on GNSS observation

NASA Astrophysics Data System (ADS)

Husin, A.; Jiyo; Anggarani, S.; Ekawati, S.; Dear, V.

2016-11-01

A total solar eclipse occurred over Indonesia in the morning hours on 9 March 2016. Ionisations in the ionosphere which is associated with the solar radiation during the total eclipse provided a good opportunity to study the ionospheric irregularities. Using global navigation satellite system (GNSS) data taken from dual-frequency receivers in Manado, we investigated and analysed the total electron content (TEC) perturbations with a time resolution of 60 s to reveal ionospheric irregularities during total eclipse. Result showed that TEC conditions based on IPP were decreased during solar eclipse on March 9, comparing with the neighbour day. The maximum percentage deviation (DTEC) from the average value during eclipse period, 00:00 - 02:40 UT reach -41.5%. The duration of maximum decrement in TEC occurs were around 2-30 minutes after the maximum obscuration.

Inverter Load Rejection Over-Voltage Testing: SolarCity CRADA Task 1a Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, A.; Hoke, A.; Chakraborty, S.

Various interconnection challenges exist when connecting distributed PV into the electrical distribution grid in terms of safety, reliability, and stability of electric power systems. One of the urgent areas for additional research - as identified by inverter manufacturers, installers, and utilities - is the potential for transient over-voltage from PV inverters. In one stage of a cooperative tests were repeated a total of seven times. The maximum over-voltage measured in any test did not exceed 200% of nominal, and typical over-voltage levels were significantly lower. The total voltage duration and the maximum continuous time above each threshold are presented here,more » as well as the time to disconnect for each test. Finally, we present a brief investigation into the effect of DC input voltage as well as a series of no-load tests. This report describes testing conducted at NREL to determine the duration and magnitude of transient over-voltages created by several commercial PV inverters during load-rejection conditions. For this work, a test plan that is currently under development by the Forum on Inverter Grid Integration Issues (FIGII) has been implemented in a custom test setup at NREL. Through a cooperative research and development agreement, NREL is working with SolarCity to address two specific types of transient overvoltage: load rejection overvoltage (LRO) and ground fault overvoltage (GFO). Additional partners in this effort include the Hawaiian Electric Companies, Northern Plains Power Technologies, and the Electric Power Research Institute.« less

Establishing Total Maximum Daily Load (TMDL) Wasteload Allocations (WLAs) for Storm Water Sources and NPDES Permit Requirements Based on Those WLAs

EPA Pesticide Factsheets

The memoranda clarify existing EPA regulatory requirements for, and provide guidance on, establishing wasteload allocations (WLAs) for storm water discharges in total maximum daily loads (TMDLs) approved or established by EPA.

SELECTION OF CANDIDATE EUTROPHICATION MODELS FOR TOTAL MAXIMUM DAILY LOADS ANALYSES

EPA Science Inventory

A tiered approach was developed to evaluate candidate eutrophication models to select a common suite of models that could be used for Total Maximum Daily Loads (TMDL) analyses in estuaries, rivers, and lakes/reservoirs. Consideration for linkage to watershed models and ecologica...

77 FR 60089 - Approval and Promulgation of Air Quality Implementation Plans; Delaware, New Jersey, and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-02

... quarter substitution test. ``Collocated'' indicates that the collocated data was substituted for missing... 24-hour standard design value is greater than the level of the standard. EPA addresses missing data... substituted for the missing data. In the maximum quarter test, maximum recorded values are substituted for the...

76 FR 30338 - Hill-Lake Gas Storage, LLC; Notice of Filing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-25

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. PR11-110-000] Hill-Lake Gas Storage, LLC; Notice of Filing Take notice that on May 13, 2011, Hill-Lake Gas Storage, LLC filed to update its address and to clarify definitions for Maximum Daily Withdrawal Quantity and Maximum Daily...

Perspectives on Inmate Communication and Interpersonal Relations in the Maximum Security Prison.

ERIC Educational Resources Information Center

Van Voorhis, Patricia; Meussling, Vonne

In recent years, scholarly and applied inquiry has addressed the importance of interpersonal communication patterns and problems in maximum security institutions for males. As a result of this research, the number of programs designed to improve the interpersonal effectiveness of prison inmates has increased dramatically. Research suggests that…

The Nature, Function, and Impact of Inmate Communication Patterns in a Maximum Security Prison.

ERIC Educational Resources Information Center

Van Voorhis, Patricia

To determine the areas in which communication affects prison environments and prison inmates, interviews were conducted with 21 adult male inmates shortly after their admission into a federal maximum security institution. The interviews were semistructured, addressing such issues as (1) perceptions of fellow inmates and staff; (2) additional…

Application of cooperative and non-cooperative games in large-scale water quantity and quality management: a case study.

PubMed

Mahjouri, Najmeh; Ardestani, Mojtaba

2011-01-01

In this paper, two cooperative and non-cooperative methodologies are developed for a large-scale water allocation problem in Southern Iran. The water shares of the water users and their net benefits are determined using optimization models having economic objectives with respect to the physical and environmental constraints of the system. The results of the two methodologies are compared based on the total obtained economic benefit, and the role of cooperation in utilizing a shared water resource is demonstrated. In both cases, the water quality in rivers satisfies the standards. Comparing the results of the two mentioned approaches shows the importance of acting cooperatively to achieve maximum revenue in utilizing a surface water resource while the river water quantity and quality issues are addressed.

Anaerobic biodegradability and treatment of grey water in upflow anaerobic sludge blanket (UASB) reactor.

PubMed

Elmitwalli, Tarek A; Otterpohl, Ralf

2007-03-01

Feasibility of grey water treatment in an upflow anaerobic sludge blanket (UASB) reactor operated at different hydraulic retention time (HRT) of 16, 10 and 6h and controlled temperature of 30 degrees C was investigated. Moreover, the maximum anaerobic biodegradability without inoculum addition and maximum removal of chemical oxygen demand (COD) fractions in grey water were determined in batch experiments. High values of maximum anaerobic biodegradability (76%) and maximum COD removal in the UASB reactor (84%) were achieved. The results showed that the colloidal COD had the highest maximum anaerobic biodegradability (86%) and the suspended and dissolved COD had similar maximum anaerobic biodegradability of 70%. Furthermore, the results of the UASB reactor demonstrated that a total COD removal of 52-64% was obtained at HRT between 6 and 16 h. The UASB reactor removed 22-30% and 15-21% of total nitrogen and total phosphorous in the grey water, respectively, mainly due to the removal of particulate nutrients. The characteristics of the sludge in the UASB reactor confirmed that the reactor had a stable performance. The minimum sludge residence time and the maximum specific methanogenic activity of the sludge ranged between 27 and 93 days and 0.18 and 0.28 kg COD/(kg VS d).

Electric propulsion options for 10 kW class earth space missions

NASA Technical Reports Server (NTRS)

Patterson, M. J.; Curran, Francis M.

1989-01-01

Five and 10 kW ion and arcjet propulsion system options for a near-term space demonstration experiment have been evaluated. Analyses were conducted to determine first-order propulsion system performance and system component mass estimates. Overall mission performance of the electric propulsion systems was quantified in terms of the maximum thrusting time, total impulse, and velocity increment capability available when integrated onto a generic spacecraft under fixed mission model assumptions. Maximum available thrusting times for the ion-propelled spacecraft options, launched on a DELTA II 6920 vehicle, range from approximately 8,600 hours for a 4-engine 10 kW system to more than 29,600 hours for a single-engine 5 kW system. Maximum total impulse values and maximum delta-v's range from 1.2x10(7) to 2.1x10(7) N-s, and 3550 to 6200 m/s, respectively. Maximum available thrusting times for the arcjet propelled spacecraft launched on the DELTA II 6920 vehicle range from approximately 528 hours for the 6-engine 10 kW hydrazine system to 2328 hours for the single-engine 5 kW system. Maximum total impulse values and maximum delta-v's range from 2.2x10(6) to 3.6x10(6) N-s, and approximately 662 to 1072 m/s, respectively.

Influence of bronchial diameter change on the airflow dynamics based on a pressure-controlled ventilation system.

PubMed

Ren, Shuai; Cai, Maolin; Shi, Yan; Xu, Weiqing; Zhang, Xiaohua Douglas

2018-03-01

Bronchial diameter is a key parameter that affects the respiratory treatment of mechanically ventilated patients. In this paper, to reveal the influence of bronchial diameter on the airflow dynamics of pressure-controlled mechanically ventilated patients, a new respiratory system model is presented that combines multigeneration airways with lungs. Furthermore, experiments and simulation studies to verify the model are performed. Finally, through the simulation study, it can be determined that in airway generations 2 to 7, when the diameter is reduced to half of the original value, the maximum air pressure (maximum air pressure in lungs) decreases by nearly 16%, the maximum flow decreases by nearly 30%, and the total airway pressure loss (sum of each generation pressure drop) is more than 5 times the original value. Moreover, in airway generations 8 to 16, with increasing diameter, the maximum air pressure, maximum flow, and total airway pressure loss remain almost constant. When the diameter is reduced to half of the original value, the maximum air pressure decreases by 3%, the maximum flow decreases by nearly 5%, and the total airway pressure loss increases by 200%. The study creates a foundation for improvement in respiratory disease diagnosis and treatment. Copyright © 2017 John Wiley & Sons, Ltd.

24 CFR 882.403 - ACC, housing assistance payments contract, and lease.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false ACC, housing assistance payments... Procedures for Moderate Rehabilitation-Basic Policies § 882.403 ACC, housing assistance payments contract, and lease. (a) Maximum Total ACC Commitments. The maximum total annual contribution that may be...

31 CFR 29.342 - Computed annuity exceeds the statutory maximum.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) In cases in which the total computed annuity exceeds the statutory maximum: (1) Federal Benefit... sufficient service as of June 30, 1997, to reach the statutory maximum benefit, but has sufficient service at...

To study the effect of orbital sling on post operative vision in cases of maxillary carcinoma undergoing total maxillectomy.

PubMed

Shukla, Anirudh; Dudeja, Vivek

2014-06-01

To study effect of orbital sling on post operative vision in cases of maxillary carcinoma undergoing total maxillectomy. All patients with the principal procedure of "total maxillectomy" for histopathologically proven cases of carcinoma maxilla in department of otorhinolaryngology and head-neck surgery, N.S.C.B. medical college, Jabalapur, Madhya Pradesh, India from July 2011 to October 2013 were included. Out of the 20 patients irrespective of whether orbital sling was created or not, maximum number of patients 8 (40 %) showed a 3 step improvement, and maximum improvement seen was up to five steps. Out of the 14 patients in which orbital sling was created maximum number of patients 7 (50 %) showed a 3 step improvement, and maximum improvement seen was up to five steps. Out of the 6 patients in whom orbital sling was not created maximum number of patients 3 (50 %) showed a 2 step improvement, and maximum improvement seen was up to three steps. Infraorbital repair with the help of sling results in better improvement of vision as compared to those in whom sling was not or could not be made with no significant difference on eye movements.

Power optimal single-axis articulating strategies

NASA Technical Reports Server (NTRS)

Kumar, Renjith R.; Heck, Michael L.

1991-01-01

Power optimal single axis articulating PV array motion for Space Station Freedom is investigated. The motivation is to eliminate one of the articular joints to reduce Station costs. Optimal (maximum power) Beta tracking is addressed for local vertical local horizontal (LVLH) and non-LVLH attitudes. Effects of intra-array shadowing are also presented. Maximum power availability while Beta tracking is compared to full sun tracking and optimal alpha tracking. The results are quantified in orbital and yearly minimum, maximum, and average values of power availability.

Influence of Thawing Methods and Storage Temperatures on Bacterial Diversity, Growth Kinetics, and Biogenic Amine Development in Atlantic Mackerel.

PubMed

Onyango, S; Palmadottir, H; Tómason, T; Marteinsson, V T; Njage, P M K; Reynisson, E

2016-11-01

Limited knowledge is currently available on the influence of fish thawing and subsequent storage conditions on bacterial growth kinetics, succession, and diversity alongside the production of biogenic amines. This study aimed to address these factors during the thawing and subsequent storage of mackerel. Thawing was either done fast in 18°C water for 2 h or slowly at 30°C overnight. Subsequent storage was at 30°C (ambient) for 36 h and 2 to 5°C (refrigerated) for 12 days. The cultivation methods used were total viable counts, hydrogen sulfide-producing bacteria, and Pseudomonas . Maximum growth rate, population density, and lag time were fitted on the counts using the Baranyi model. The bacterial diversity and succession were based on sequencing of 16S rRNA amplicons, and biogenic amines were quantified on high-pressure liquid chromatography-UV. The results show that lag time of hydrogen sulfide-producing bacteria was significantly affected by both thawing methods, and further, the interaction between thawing and storage significantly affected the maximum growth rate of these bacteria. However, the maximum growth rate of Pseudomonas was higher during refrigerated storage compared with storage at ambient temperature. Total viable counts showed longer lag time and reduced growth rate under refrigerated storage. Higher bacterial diversity was correlated to slow thawing and storage at ambient temperature compared with slow thawing and refrigerated storage. Overall, Acinetobacter and Psychrobacter genera were the dominant bacterial populations. The amine levels were low and could not be differentiated along the thawing and storage approaches, despite a clear increase in bacterial load, succession, and diversity. This corresponded well with the low abundance of biogenic amine-producing bacteria, with the exception of the genus Proteus , which was 8.6% in fast-thawed mackerel during storage at ambient temperature. This suggests that the decarboxylation potential is dependent on both microbial load and microbial community structure.

A solid waste audit and directions for waste reduction at the University of British Columbia, Canada.

PubMed

Felder, M A; Petrell, R J; Duff, S J

2001-08-01

A novel design for a solid waste audit was developed and applied to the University of British Columbia, Canada, in 1998. This audit was designed to determine the characteristics of the residual solid waste generated by the campus and provide directions for waste reduction. The methodology was constructed to address complications in solid waste sampling, including spatial and temporal variation in waste, extrapolation from the study area, and study validation. Accounting for spatial effects decreased the variation in calculating total waste loads. Additionally, collecting information on user flow provided a means to decrease daily variation in solid waste and allow extrapolation over time and space. The total annual waste estimated from the experimental design was compared to documented values and was found to differ by -18%. The majority of this discrepancy was likely attributable to the unauthorised disposal of construction and demolition waste. Several options were proposed to address waste minimisation goals. These included: enhancing the current recycling program, source reduction of plastic materials, and/or diverting organic material to composting (maximum diversion: approximately 320, approximately 270, and approximately 1510 t yr(-1), respectively). The greatest diversion by weight would be accomplished through the diversion of organic material, as it was estimated to comprise 70% of the projected waste stream. The audit methodology designed is most appropriate for facilities/regions that have a separate collection system for seasonal wastes and have a means for tracking user flow.

First assembly times and equilibration in stochastic coagulation-fragmentation

DOE Office of Scientific and Technical Information (OSTI.GOV)

D’Orsogna, Maria R.; Department of Mathematics, CSUN, Los Angeles, California 91330-8313; Lei, Qi

2015-07-07

We develop a fully stochastic theory for coagulation and fragmentation (CF) in a finite system with a maximum cluster size constraint. The process is modeled using a high-dimensional master equation for the probabilities of cluster configurations. For certain realizations of total mass and maximum cluster sizes, we find exact analytical results for the expected equilibrium cluster distributions. If coagulation is fast relative to fragmentation and if the total system mass is indivisible by the mass of the largest allowed cluster, we find a mean cluster-size distribution that is strikingly broader than that predicted by the corresponding mass-action equations. Combinations ofmore » total mass and maximum cluster size under which equilibration is accelerated, eluding late-stage coarsening, are also delineated. Finally, we compute the mean time it takes particles to first assemble into a maximum-sized cluster. Through careful state-space enumeration, the scaling of mean assembly times is derived for all combinations of total mass and maximum cluster size. We find that CF accelerates assembly relative to monomer kinetic only in special cases. All of our results hold in the infinite system limit and can be only derived from a high-dimensional discrete stochastic model, highlighting how classical mass-action models of self-assembly can fail.« less

Influence of vegetation and gravel mesh on the tertiary treatment of wastewater from a cosmetics industry.

PubMed

Vlyssides, Apostolos G; Mai, Sofia T H; Barampouti, Elli Maria P; Loukakis, Haralampos N

2009-07-01

To estimate the influence of gravel mesh (fine and coarse) and vegetation (Phragmites and Arundo) on the efficiency of a reed bed, a pilot plant was included after the wastewater treatment plant of a cosmetic industry treatment system according to a 22 factorial experimental design. The maximum biochemical oxygen demand (BOD5), chemical oxygen demand (COD) and total phosphorous (TP) reduction was observed in the reactor, where Phragmites and fine gravel were used. In the reactor with Phragmites and coarse gravel, the maximum total Kjeldahl nitrogen (TKN) and total suspended solids (TSS) reduction was observed. The maximum total solids reduction was measured in the reed bed, which was filled with Arundo and coarse gravel. Conclusively, the treatment of a cosmetic industry's wastewater by reed beds as a tertiary treatment method is quite effective.

Effects of fasting on maximum thermogenesis in temperature-acclimated rats

NASA Astrophysics Data System (ADS)

Wang, L. C. H.

1981-09-01

To further investigate the limiting effect of substrates on maximum thermogenesis in acute cold exposure, the present study examined the prevalence of this effect at different thermogenic capabilities consequent to cold- or warm-acclimation. Male Sprague-Dawley rats (n=11) were acclimated to 6, 16 and 26‡C, in succession, their thermogenic capabilities after each acclimation temperature were measured under helium-oxygen (21% oxygen, balance helium) at -10‡C after overnight fasting or feeding. Regardless of feeding conditions, both maximum and total heat production were significantly greater in 6>16>26‡C-acclimated conditions. In the fed state, the total heat production was significantly greater than that in the fasted state at all acclimating temperatures but the maximum thermogenesis was significant greater only in the 6 and 16‡C-acclimated states. The results indicate that the limiting effect of substrates on maximum and total thermogenesis is independent of the magnitude of thermogenic capability, suggesting a substrate-dependent component in restricting the effective expression of existing aerobic metabolic capability even under severe stress.

Electric Propulsion Options for 10 kW Class Earth-Space Missions

NASA Technical Reports Server (NTRS)

Patterson, M. J.; Curran, Francis M.

1989-01-01

Five and 10 kW ion and arcjet propulsion system options for a near-term space demonstration experiment were evaluated. Analyses were conducted to determine first-order propulsion system performance and system component mass estimates. Overall mission performance of the electric propulsion systems was quantified in terms of the maximum thrusting time, total impulse, and velocity increment capability available when integrated onto a generic spacecraft under fixed mission model assumptions. Maximum available thrusting times for the ion-propelled spacecraft options, launched on a DELTA 2 6920 vehicle, range from approximately 8,600 hours for a 4-engine 10 kW system to more than 29,600 hours for a single-engine 5 kW system. Maximum total impulse values and maximum delta-v's range from 1.2x10 (exp 7) to 2.1x10 (exp 7) N-s, and 3550 to 6200 m/s, respectively. Maximum available thrusting times for the arcjet propelled spacecraft launched on the DELTA 2 6920 vehicle range from approximately 528 hours for the 6-engine 10 kW hydrazine system to 2328 hours for the single-engine 5 kW system. Maximum total impulse values and maximum delta-v's range from 2.2x10 (exp 6) to 3.6x10 (exp 6) N-s, and approximately 662 to 1072 m/s, respectively.

Prevalence and counts of Salmonella spp. in minimally processed vegetables in São Paulo, Brazil.

PubMed

Sant'Ana, Anderson S; Landgraf, Mariza; Destro, Maria Teresa; Franco, Bernadette D G M

2011-09-01

Minimally processed vegetables (MPV) may be important vehicles of Salmonella spp. and cause disease. This study aimed at detecting and enumerating Salmonella spp. in MPV marketed in the city of São Paulo, Brazil. A total of 512 samples of MPV packages collected in retail stores were tested for Salmonella spp. and total coliforms and Escherichia coli as indication of the hygienic status. Salmonella spp. was detected in four samples, two using the detection method and two using the counting method, where the results were 8.8 × 10(2) CFU/g and 2.4 × 10(2) CFU/g. The serovars were Salmonella Typhimurium (three samples) and Salmonella enterica subsp. enterica O:47:z4,z23:- (one sample). Fourteen samples (2.7%) presented counts of E. coli above the maximum limit established by the Brazilian regulation for MPV (10(2) CFU/g). Therefore, tightened surveillance and effective intervention strategies are necessary in order to address consumers and governments concerns on safety of MPV. Copyright © 2011 Elsevier Ltd. All rights reserved.

40 CFR Table 4 to Subpart Ffff of... - Emission Limits for Storage Tanks

Code of Federal Regulations, 2014 CFR

2014-07-01

... applies to your storage tanks: For each . . . For which . . . Then you must . . . 1. Group 1 storage tank a. The maximum true vapor pressure of total HAP at the storage temperature is ≥76.6 kilopascals i... maximum true vapor pressure of total HAP at the storage temperature is <76.6 kilopascals i. Comply with...

40 CFR Table 4 to Subpart Ffff of... - Emission Limits for Storage Tanks

Code of Federal Regulations, 2013 CFR

2013-07-01

... applies to your storage tanks: For each . . . For which . . . Then you must . . . 1. Group 1 storage tank a. The maximum true vapor pressure of total HAP at the storage temperature is ≥76.6 kilopascals i... maximum true vapor pressure of total HAP at the storage temperature is <76.6 kilopascals i. Comply with...

75 FR 43160 - Clean Water Act Section 303(d): Final Agency Action on One Arkansas Total Maximum Daily Load (TMDL)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-23

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9179-3 ] Clean Water Act Section 303(d): Final Agency Action on One Arkansas Total Maximum Daily Load (TMDL) AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of availability. SUMMARY: This notice announces the final agency action on one TMDL established by...

Core sample extractor

NASA Technical Reports Server (NTRS)

Akins, James; Cobb, Billy; Hart, Steve; Leaptrotte, Jeff; Milhollin, James; Pernik, Mark

1989-01-01

The problem of retrieving and storing core samples from a hole drilled on the lunar surface is addressed. The total depth of the hole in question is 50 meters with a maximum diameter of 100 millimeters. The core sample itself has a diameter of 60 millimeters and will be two meters in length. It is therefore necessary to retrieve and store 25 core samples per hole. The design utilizes a control system that will stop the mechanism at a certain depth, a cam-linkage system that will fracture the core, and a storage system that will save and catalogue the cores to be extracted. The Rod Changer and Storage Design Group will provide the necessary tooling to get into the hole as well as to the core. The mechanical design for the cam-linkage system as well as the conceptual design of the storage device are described.

Optimal dynamic pricing and replenishment policy for perishable items with inventory-level-dependent demand

NASA Astrophysics Data System (ADS)

Lu, Lihao; Zhang, Jianxiong; Tang, Wansheng

2016-04-01

An inventory system for perishable items with limited replenishment capacity is introduced in this paper. The demand rate depends on the stock quantity displayed in the store as well as the sales price. With the goal to realise profit maximisation, an optimisation problem is addressed to seek for the optimal joint dynamic pricing and replenishment policy which is obtained by solving the optimisation problem with Pontryagin's maximum principle. A joint mixed policy, in which the sales price is a static decision variable and the replenishment rate remains to be a dynamic decision variable, is presented to compare with the joint dynamic policy. Numerical results demonstrate the advantages of the joint dynamic one, and further show the effects of different system parameters on the optimal joint dynamic policy and the maximal total profit.

[Left ventricular volume determination by first-pass radionuclide angiocardiography using a semi-geometric count-based method].

PubMed

Kinoshita, S; Suzuki, T; Yamashita, S; Muramatsu, T; Ide, M; Dohi, Y; Nishimura, K; Miyamae, T; Yamamoto, I

1992-01-01

A new radionuclide technique for the calculation of left ventricular (LV) volume by the first-pass (FP) method was developed and examined. Using a semi-geometric count-based method, the LV volume can be measured by the following equation: CV = CM/(L/d). V = (CT/CV) x d3 = (CT/CM) x L x d2. (V = LV volume, CV = voxel count, CM = the maximum LV count, CT = the total LV count, L = LV depth where the maximum count was obtained, and d = pixel size.) This theorem was applied to FP LV images obtained in the 30-degree right anterior oblique position. Frame-mode acquisition was performed and the LV end-diastolic maximum count and total count were obtained. The maximum LV depth was obtained as the maximum width of the LV on the FP end-diastolic image, using the assumption that the LV cross-section is circular. These values were substituted in the above equation and the LV end-diastolic volume (FP-EDV) was calculated. A routine equilibrium (EQ) study was done, and the end-diastolic maximum count and total count were obtained. The LV maximum depth was measured on the FP end-diastolic frame, as the maximum length of the LV image. Using these values, the EQ-EDV was calculated and the FP-EDV was compared to the EQ-EDV. The correlation coefficient for these two values was r = 0.96 (n = 23, p less than 0.001), and the standard error of the estimated volume was 10 ml.(ABSTRACT TRUNCATED AT 250 WORDS)

Measuring the Strength of the Horned Passalus Beetle, Odontotaenius disjunctus: Revisiting an Old Topic with Modern Technology

PubMed Central

Davis, Andrew K.; Attarha, Barrett; Piefke, Taylor J.

2013-01-01

Over a century ago, a pioneering researcher cleverly devised a means to measure how much weight the horned passalus beetle, Odontotaenius disjunctus (Illiger) (Coleoptera: Passalidae), could pull using a series of springs, pulleys, and careful observation. The technology available in modern times now allows for more rigorous data collection on this topic, which could have a number of uses in scientific investigations. In this study, an apparatus was constructed using a dynamometer and a data logger in an effort to ascertain the pulling strength of this species. By allowing beetles to pull for 10 min, each beetle's mean and maximum pulling force (in Newtons) were obtained for analyses, and whether these measures are related was determined. Then, whether factors such as body length, thorax size, horn size, or gender affect either measure of strength was investigated. Basic body measurements, including horn size, of males versus females were compared. The measurements of 38 beetles (20 females, 18 males) showed there was no difference in overall body length between sexes, but females had greater girth (thorax width) than males, which could translate into larger muscle mass. A total of 21 beetles (10 females, 11 males) were tested for pulling strength. The grand mean pulling force was 0.14 N, and the grand mean maximum was 0.78 N. Despite the fact that beetles tended to pull at 20% of their maximum capacity most of the time, and that maximum force was over 5 times larger than the mean force, the 2 measures were highly correlated, suggesting they may be interchangeable for research purposes. Females had twice the pulling strength (both maximum and mean force) as males in this species overall, but when the larger thorax size of females was considered, the effect of gender was not significant. Beetle length was not a significant predictor of pulling force, but horn size was associated with maximum force. The best predictor of both measures of strength appeared to be thorax size. There are a multitude of interesting scientific questions that could be addressed using data on beetle pulling strength, and this project serves as a starting point for such work. PMID:24735074

Cardiometabolic Mortality by Supplemental Nutrition Assistance Program Participation and Eligibility in the United States

PubMed Central

Rehm, Colin D.; Wilde, Parke; Mozaffarian, Dariush

2017-01-01

Objectives. To investigate total and cause-specific cardiometabolic mortality among Supplemental Nutrition Assistance Program (SNAP) participants, SNAP-eligible nonparticipants, and SNAP-ineligible individuals overall and by age, gender, race/ethnicity, and other characteristics. Methods. We performed a prospective study with nationally representative survey data from the National Health Interview Survey (2000–2009), merged with subsequent Public-Use Linked Mortality Files (2000–2011). We used survey-weighted Cox proportional hazards models adjusted for age and gender to estimate hazard ratios of total and cause-specific cardiometabolic mortality for 499 741 US adults aged 25 years or older. Results. Over a mean of 6.8 years of follow-up (maximum 11.9 years), 39 293 deaths occurred, including 7408 heart disease, 2185 stroke, and 1376 diabetes deaths. Individuals participating in SNAP exhibited higher total and cardiovascular disease mortality, largely limited to non-Hispanic Whites and non-Hispanic Blacks, than both SNAP-eligible nonparticipants and SNAP-ineligible individuals, and higher diabetes mortality across races/ethnicities (P < .01). Conclusions. Participants in SNAP require greater focus to understand and further address their poor health outcomes. Public Health Implications. Low-income Americans require even greater efforts to improve their health than they currently receive, and such efforts should be a priority for public health policymakers. PMID:28103061

75 FR 78985 - County of DuPage; Notice of Preliminary Permit Application Accepted for Filing and Soliciting...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-17

... (upper reservoir) having a total storage capacity of 8,145 acre- feet at a normal maximum operating... reservoir) 250 feet below the bottom of the upper reservoir having a total/usable storage capacity of 7,465 acre-feet at normal maximum operation elevation of 210 feet msl; (5) a powerhouse with approximate...

A Procedure for Setting Environmentally Safe Total Maximum Daily Loads (TMDLs) for Selenium

Treesearch

A. Dennis Lemly

2002-01-01

This article presents a seven-step procedure for developing environmentally safe total maximum daily loads (TMDLs) for selenium. The need for this information stems from recent actions taken by the U.S. Environmental Protection Agency (EPA) that may require TMDLs for selenium and other contaminants that are impairing water bodies. However, there is no technical...

Output of skeletal muscle contractions. a study of isokinetic plantar flexion in athletes.

PubMed

Fugl-Meyer, A R; Mild, K H; Hörnsten, J

1982-06-01

Maximum torques, total work and mean power of isokinetic plantar flexions were measured with simultaneous registrations. The integrated electromyograms (iEMG) were obtained by surface electrodes from all three heads of the m. triceps surae. The method applied offers possibilities for adequate description of dynamic muscular work which in the case of plantar flexion in trained man declines as a negative exponential function of angular motion velocity. The decline is parallel to that of maximum torques. The summed triceps surae iEMG was inversely proportional to the velocity and direct proportional to time suggesting that structural rather than neural factors determine the relationships between velocity of angular motion and maximum torque/total work of single Mmaneuvers. Moreover, the fact that maximum mean power as well as maximum electrical efficiency were reached at the functional velocity of toe-off during gait suggests an influence of pragmatic demands on plantar flexion mechanical output.

Operation regimes of a dielectric laser accelerator

NASA Astrophysics Data System (ADS)

Hanuka, Adi; Schächter, Levi

2018-04-01

We investigate three operation regimes in dielectric laser driven accelerators: maximum efficiency, maximum charge, and maximum loaded gradient. We demonstrate, using a self-consistent approach, that loaded gradients of the order of 1 to 6 [GV/m], efficiencies of 20% to 80%, and electrons flux of 1014 [el/s] are feasible, without significant concerns regarding damage threshold fluence. The latter imposes that the total charge per squared wavelength is constant (a total of 106 per μm2). We conceive this configuration as a zero-order design that should be considered for the road map of future accelerators.

Total Quality Management Implementation Plan: Defense Depot, Ogden

DTIC Science & Technology

1989-07-01

NUMBERS Total Quality Management Implementation Plan Defense Depot Ogden 6. AUTHOR(S) 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) 8. PERFORMING...PAGES TQM (Total Quality Management ), Continuous Process Improvement, Depot Operations, Process Action Teams 16. PRICE CODE 17. SECURITY...034 A Message From The Commander On Total Quality Management i fully support the DLA aoproacii to Total Quality Management . As stated by General

40 CFR Table 4 to Subpart Ooo of... - Operating Parameter Levels

Code of Federal Regulations, 2012 CFR

2012-07-01

... temperature Maximum temperature Carbon absorber Total regeneration steam or nitrogen flow, or pressure (gauge or absolute) a during carbon bed regeneration cycle; and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s)) Maximum flow or pressure; and maximum...

31 CFR 29.342 - Computed annuity exceeds the statutory maximum.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Computed annuity exceeds the... of the Amount of Federal Benefit Payments § 29.342 Computed annuity exceeds the statutory maximum. (a) In cases in which the total computed annuity exceeds the statutory maximum: (1) Federal Benefit...

38 CFR 59.40 - Maximum number of nursing home care and domiciliary care beds for veterans by State.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Maximum number of nursing... ACQUISITION OF STATE HOMES § 59.40 Maximum number of nursing home care and domiciliary care beds for veterans... increase the total number of state home nursing home and domiciliary beds in that state beyond the maximum...

38 CFR 59.40 - Maximum number of nursing home care and domiciliary care beds for veterans by State.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2011-07-01 2011-07-01 false Maximum number of nursing... ACQUISITION OF STATE HOMES § 59.40 Maximum number of nursing home care and domiciliary care beds for veterans... increase the total number of state home nursing home and domiciliary beds in that state beyond the maximum...

38 CFR 59.40 - Maximum number of nursing home care and domiciliary care beds for veterans by State.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2012-07-01 2012-07-01 false Maximum number of nursing... ACQUISITION OF STATE HOMES § 59.40 Maximum number of nursing home care and domiciliary care beds for veterans... increase the total number of state home nursing home and domiciliary beds in that state beyond the maximum...

38 CFR 59.40 - Maximum number of nursing home care and domiciliary care beds for veterans by State.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2014-07-01 2014-07-01 false Maximum number of nursing... ACQUISITION OF STATE HOMES § 59.40 Maximum number of nursing home care and domiciliary care beds for veterans... increase the total number of state home nursing home and domiciliary beds in that state beyond the maximum...

38 CFR 59.40 - Maximum number of nursing home care and domiciliary care beds for veterans by State.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2013-07-01 2013-07-01 false Maximum number of nursing... ACQUISITION OF STATE HOMES § 59.40 Maximum number of nursing home care and domiciliary care beds for veterans... increase the total number of state home nursing home and domiciliary beds in that state beyond the maximum...

40 CFR 421.306 - Pretreatment standards for new sources.

Code of Federal Regulations, 2013 CFR

2013-07-01

... average mg/kg (pounds per million pounds) of TiCl4 produced Chromium (total) 0.346 0.140 Lead 0.262 0.122... Maximum for monthly average mg/kg (pounds per million pounds) of TiCl4 produced Chromium (total) 0.385 0... for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of TiCl4 handled Chromium...

40 CFR 421.306 - Pretreatment standards for new sources.

Code of Federal Regulations, 2014 CFR

2014-07-01

... average mg/kg (pounds per million pounds) of TiCl4 produced Chromium (total) 0.346 0.140 Lead 0.262 0.122... Maximum for monthly average mg/kg (pounds per million pounds) of TiCl4 produced Chromium (total) 0.385 0... for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of TiCl4 handled Chromium...

40 CFR 421.306 - Pretreatment standards for new sources.

Code of Federal Regulations, 2012 CFR

2012-07-01

... average mg/kg (pounds per million pounds) of TiCl4 produced Chromium (total) 0.346 0.140 Lead 0.262 0.122... Maximum for monthly average mg/kg (pounds per million pounds) of TiCl4 produced Chromium (total) 0.385 0... for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of TiCl4 handled Chromium...

Multi-objective optimal design of magnetorheological engine mount based on an improved non-dominated sorting genetic algorithm

NASA Astrophysics Data System (ADS)

Zheng, Ling; Duan, Xuwei; Deng, Zhaoxue; Li, Yinong

2014-03-01

A novel flow-mode magneto-rheological (MR) engine mount integrated a diaphragm de-coupler and the spoiler plate is designed and developed to isolate engine and the transmission from the chassis in a wide frequency range and overcome the stiffness in high frequency. A lumped parameter model of the MR engine mount in single degree of freedom system is further developed based on bond graph method to predict the performance of the MR engine mount accurately. The optimization mathematical model is established to minimize the total of force transmissibility over several frequency ranges addressed. In this mathematical model, the lumped parameters are considered as design variables. The maximum of force transmissibility and the corresponding frequency in low frequency range as well as individual lumped parameter are limited as constraints. The multiple interval sensitivity analysis method is developed to select the optimized variables and improve the efficiency of optimization process. An improved non-dominated sorting genetic algorithm (NSGA-II) is used to solve the multi-objective optimization problem. The synthesized distance between the individual in Pareto set and the individual in possible set in engineering is defined and calculated. A set of real design parameters is thus obtained by the internal relationship between the optimal lumped parameters and practical design parameters for the MR engine mount. The program flowchart for the improved non-dominated sorting genetic algorithm (NSGA-II) is given. The obtained results demonstrate the effectiveness of the proposed optimization approach in minimizing the total of force transmissibility over several frequency ranges addressed.

Effects of diffusion on total biomass in heterogeneous continuous and discrete-patch systems

USGS Publications Warehouse

DeAngelis, Donald L.; Ming Ni, Wei; Zhang, Bo

2016-01-01

Theoretical models of populations on a system of two connected patches previously have shown that when the two patches differ in maximum growth rate and carrying capacity, and in the limit of high diffusion, conditions exist for which the total population size at equilibrium exceeds that of the ideal free distribution, which predicts that the total population would equal the total carrying capacity of the two patches. However, this result has only been shown for the Pearl-Verhulst growth function on two patches and for a single-parameter growth function in continuous space. Here, we provide a general criterion for total population size to exceed total carrying capacity for three commonly used population growth rates for both heterogeneous continuous and multi-patch heterogeneous landscapes with high population diffusion. We show that a sufficient condition for this situation is that there is a convex positive relationship between the maximum growth rate and the parameter that, by itself or together with the maximum growth rate, determines the carrying capacity, as both vary across a spatial region. This relationship occurs in some biological populations, though not in others, so the result has ecological implications.

Interaction with Phosphoinositides Confers Adaptation onto the TRPV1 Pain Receptor

PubMed Central

Yao, Jing; Qin, Feng

2009-01-01

Adaptation is a common feature of many sensory systems. But its occurrence to pain sensation has remained elusive. Here we address the problem at the receptor level and show that the capsaicin ion channel TRPV1, which mediates nociception at the peripheral nerve terminals, possesses properties essential to the adaptation of sensory responses. Ca2+ influx following the channel opening caused a profound shift (∼14-fold) of the agonist sensitivity, but did not alter the maximum attainable current. The shift was adequate to render the channel irresponsive to normally saturating concentrations, leaving the notion that the channel became no longer functional after desensitization. By simultaneous patch-clamp recording and total internal reflection fluorescence (TIRF) imaging, it was shown that the depletion of phosphatidylinositol 4,5-bisphosphate (PIP2) induced by Ca2+ influx had a rapid time course synchronous to the desensitization of the current. The extent of the depletion was comparable to that by rapamycin-induced activation of a PIP2 5-phosphatase, which also caused a significant reduction of the agonist sensitivity without affecting the maximum response. These results support a prominent contribution of PIP2 depletion to the desensitization of TRPV1 and suggest the adaptation as a possible physiological function for the Ca2+ influx through the channel. PMID:19243225

Chlorine toxicity to early life stages of freshwater mussels (Bivalvia: Unionidae)

USGS Publications Warehouse

Valenti, T.W.; Cherry, D.S.; Currie, R.J.; Neves, R.J.; Jones, J.W.; Mair, R.; Kane, C.M.

2006-01-01

Chlorine (Cl) is a highly toxic, widely used halogen disinfectant that is present in point-source pollution discharges from wastewater treatment plants and industrial facilities. The U.S. Environmental Protection Agency freshwater criteria for Cl are 19 ??g total residual Cl (TRC)/L as a maximum 1-h average concentration and 11 ??g TRC/L as a maximum 4-d average; however, toxicological data for unionids were not used in these calculations. To address this void in the data, we conducted acute tests with glochidia from several species and 21-d bioassays with three-month-old Epioblasma capsaeformis and three-, six-, and 12-month-old Villosa iris juveniles. The 24-h lethal concentration 50 values for glochidia were between 70 and 220 ??g TRC/L, which are 2.5 to 37 times higher than those reported in other studies for cladocerans. Significant declines in growth and survivorship were observed in the 21-d test with E. capsaeformis at 20 ??g TRC/L. Lowest-observed-adverse- effects concentrations in bioassays with juvenile V. iris were higher (30-60 ??g TRC/L) but showed a significant trend of declining toxicity with increased age. Although endpoints were above water quality criteria, the long life spans of unionids and potential implications of chronic exposure to endangered juvenile mussels still warrant concern. ?? 2006 SETAC.

Quantifying environmental limiting factors on tree cover using geospatial data.

PubMed

Greenberg, Jonathan A; Santos, Maria J; Dobrowski, Solomon Z; Vanderbilt, Vern C; Ustin, Susan L

2015-01-01

Environmental limiting factors (ELFs) are the thresholds that determine the maximum or minimum biological response for a given suite of environmental conditions. We asked the following questions: 1) Can we detect ELFs on percent tree cover across the eastern slopes of the Lake Tahoe Basin, NV? 2) How are the ELFs distributed spatially? 3) To what extent are unmeasured environmental factors limiting tree cover? ELFs are difficult to quantify as they require significant sample sizes. We addressed this by using geospatial data over a relatively large spatial extent, where the wall-to-wall sampling ensures the inclusion of rare data points which define the minimum or maximum response to environmental factors. We tested mean temperature, minimum temperature, potential evapotranspiration (PET) and PET minus precipitation (PET-P) as potential limiting factors on percent tree cover. We found that the study area showed system-wide limitations on tree cover, and each of the factors showed evidence of being limiting on tree cover. However, only 1.2% of the total area appeared to be limited by the four (4) environmental factors, suggesting other unmeasured factors are limiting much of the tree cover in the study area. Where sites were near their theoretical maximum, non-forest sites (tree cover < 25%) were primarily limited by cold mean temperatures, open-canopy forest sites (tree cover between 25% and 60%) were primarily limited by evaporative demand, and closed-canopy forests were not limited by any particular environmental factor. The detection of ELFs is necessary in order to fully understand the width of limitations that species experience within their geographic range.

Assessing attainable intensification of global pasture systems at the 5 min x 5 min scale

NASA Astrophysics Data System (ADS)

Sheehan, J. J.; Lynd, L. R.; Allee, A.; Campbell, E. E.; Herrero, M.; Jaiswal, D.; Mueller, N. D.; Lamparelli, R.; Soares, J.

2017-12-01

Two-thirds of the world's agricultural land consist of pastures grazed by livestock. We use a recently published global dataset with information on feed consumption, animal stocks and productivity to analyze the intensification potential of pasture (grazing only) based production of meat and milk. Here we show that global output from pastures occupied by livestock circa 2000 could increase more than five-fold by simply raising their performance to the maximum achieved, climate-adjusted levels observed globally. The largest increases are in South America and sub Saharan Africa, where pasture systems are also more economically important. Furthermore, 40% of the land classified as pasture in the year 2000 had no animals on it. While pastureland currently contributes only a small fraction of total meat and milk production globally, such increases potentially offer an important new degree of freedom in addressing the challenge of sustainable stewardship of the earth's land resources.

Carbon storage and sequestration by trees in VIT University campus

NASA Astrophysics Data System (ADS)

Saral, A. Mary; SteffySelcia, S.; Devi, Keerthana

2017-11-01

The present study addresses carbon storage and sequestration by trees grown in VIT University campus, Vellore. Approximately twenty trees were selected from Woodstockarea. The above ground biomass and below ground biomass were calculated. The above ground biomass includes non-destructive anddestructive sampling. The Non-destructive method includes the measurement of height of thetree and diameter of the tree. The height of the tree is calculated using Total Station instrument and diameter is calculated using measuring tape. In the destructive method the weight of samples (leaves) and sub-samples (fruits, flowers) of the tree were considered. To calculate the belowground biomass soil samples are taken and analyzed. The results obtained were used to predict the carbon storage. It was found that out of twenty tree samples Millingtonia hortensis which is commonly known as Cork tree possess maximum carbon storage (14.342kg/tree) and carbon sequestration (52.583kg/tree) respectively.

Guidelines for developing spacecraft maximum allowable concentrations for Space Station contaminants

NASA Technical Reports Server (NTRS)

1992-01-01

The National Aeronautics and Space Administration (NASA) is preparing to launch a manned space station by the year 1996. Because of concerns about the health, safety, and functioning abilities of the crews, NASA has requested that the National Research Council (NRC) through the Board on Environmental Studies and Toxicology (BEST) provide advice on toxicological matters for the space-station program. The Subcommittee on Guidelines for Developing Spacecraft Maximum Allowable Concentrations for Space Station Contaminants was established by the Committee on Toxicology (COT) to address NASA's concerns. Spacecraft maximum allowable concentrations (SMAC's) are defined as the maximum concentrations of airborne substances (such as gas, vapor, or aerosol) that will not cause adverse health effects, significant discomfort, or degradation in crew performance.

The Impact of the Network Topology on the Viral Prevalence: A Node-Based Approach

PubMed Central

Yang, Lu-Xing; Draief, Moez; Yang, Xiaofan

2015-01-01

This paper addresses the impact of the structure of the viral propagation network on the viral prevalence. For that purpose, a new epidemic model of computer virus, known as the node-based SLBS model, is proposed. Our analysis shows that the maximum eigenvalue of the underlying network is a key factor determining the viral prevalence. Specifically, the value range of the maximum eigenvalue is partitioned into three subintervals: viruses tend to extinction very quickly or approach extinction or persist depending on into which subinterval the maximum eigenvalue of the propagation network falls. Consequently, computer virus can be contained by adjusting the propagation network so that its maximum eigenvalue falls into the desired subinterval. PMID:26222539

Payload and Survivability Tradeoffs in the Presence of Risk

DTIC Science & Technology

2013-06-01

9. SPONSORING /MONITORING AGENCY NAME(S) AND ADDRESS(ES) N/ A 10. SPONSORING/MONITORING AGENCY REPORT NUMBER 11. SUPPLEMENTARY NOTES The...DISTRIBUTION CODE A 13. ABSTRACT (maximum 200 words) The objective of this thesis research is to find an optimized throughput plan for ship...considering cargo ship size, quantity, speed, range, and risk when traversing through a designated travel area. Data collected from previous theses

Gateway: Volume 3 Number 4

DTIC Science & Technology

1992-01-01

applications are described, including windshield, symbols dancing trans- high- flight -time pilots (and big bud- an automobile system that permits driv...ORGANIZATION NAME(S) AND ADDRESS(ES) 8. PERFORMING ORGANIZATION REPORT NUMBER Human Systems JAC 2261 Monahan Way, Bldg. 196 GWIII4 WPAFB OH> 45433-7022 9...release; distribution is unlimited. Free to public by contacting the Human Systems IAC. A 13. ABSTRACT (Maximum 200 Words) This issue contains articles

Service Wear Test Evaluation of Structural/Proximity Firefighters Gloves

DTIC Science & Technology

1991-06-05

CLOTHING AND TEXTILE RESEARCH FACILITY NATICK, MASSACHUSETTS Approved for public release; Technical Report No. NCTRF 188 distribution unlimited. 92 12 ;e3...ORGANIZATION NAME(S) AND ADDRESS(ES) 8. PERFORMING ORGANIZATION REPORT NUMBER NAVY CLOTHING AND TEXTILE RESEARCH FACILITY P.O. BOX 59 NCTRF REPORT NO...CODE APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED 13. ABSTRACT (Maximum 200 words) The Navy Clothing and Textile Research Facility (NCTRF

Diel variations of the bathymetric distribution of zooplankton groups and biomass in Cap-Ferret Canyon, France

NASA Astrophysics Data System (ADS)

Maycas, Encarna Ribera; Bourdillon, André; Macquart-Moulin, Claude; Passelaigue, Françoise; Patriti, Gilbert

1999-10-01

The bathymetric distribution, abundance and diel vertical migrations (DVM) of zooplankton were investigated along the axis of the Cap-Ferret Canyon (Bay of Biscay, French Atlantic coast) by a consecutive series of synchronous net hauls that sampled the whole water column (0-2000 m in depth) during a diel cycle. The distribution of appendicularians (maximum 189 individuals m -3), cladocerans (maximum 287 individuals m -3), copepods (copepods<4 mm, maximum 773 individuals m -3, copepods>4 mm, maximum 13 individuals m -3), ostracods (maximum 8 individuals m -3), siphonophores (maximum >2 individuals m -3) and peracarids (maximum >600 individuals 1000 m -3) were analysed and represented by isoline diagrams. The biomass of total zooplankton (maximum 18419 μg C m -3, 3780 μg N m -3) and large copepods (>4 mm maximum 2256 μg C m -3, 425 μg N m -3) also were determined. Vertical migration was absent or affected only the epipelagic zone for appendicularians, cladocerans, small copepods and siphonophores. Average amplitude of vertical migration was about 400-500 m for ostracods, some hyperiids and mysids, and large copepods, which were often present in the epipelagic, mesopelagic, and bathypelagic zones. Large copepods can constitute more than 80% of the biomass corresponding to total zooplankton. They may play an important role in the active vertical transfer of carbon and nitrogen.

A Comparison of Athletic Movement Among Talent-Identified Juniors From Different Football Codes in Australia: Implications for Talent Development.

PubMed

Woods, Carl T; Keller, Brad S; McKeown, Ian; Robertson, Sam

2016-09-01

Woods, CT, Keller, BS, McKeown, I, and Robertson, S. A comparison of athletic movement among talent-identified juniors from different football codes in Australia: implications for talent development. J Strength Cond Res 30(9): 2440-2445, 2016-This study aimed to compare the athletic movement skill of talent-identified (TID) junior Australian Rules football (ARF) and soccer players. The athletic movement skill of 17 TID junior ARF players (17.5-18.3 years) was compared against 17 TID junior soccer players (17.9-18.7 years). Players in both groups were members of an elite junior talent development program within their respective football codes. All players performed an athletic movement assessment that included an overhead squat, double lunge, single-leg Romanian deadlift (both movements performed on right and left legs), a push-up, and a chin-up. Each movement was scored across 3 essential assessment criteria using a 3-point scale. The total score for each movement (maximum of 9) and the overall total score (maximum of 63) were used as the criterion variables for analysis. A multivariate analysis of variance tested the main effect of football code (2 levels) on the criterion variables, whereas a 1-way analysis of variance identified where differences occurred. A significant effect was noted, with the TID junior ARF players outscoring their soccer counterparts when performing the overhead squat and push-up. No other criterions significantly differed according to the main effect. Practitioners should be aware that specific sporting requirements may incur slight differences in athletic movement skill among TID juniors from different football codes. However, given the low athletic movement skill noted in both football codes, developmental coaches should address the underlying movement skill capabilities of juniors when prescribing physical training in both codes.

Thermal modelling and optimisation of total useful energy rate of Joule-Brayton reheat cogeneration cycle

NASA Astrophysics Data System (ADS)

Dubey, M.; Chandra, H.; Kumar, Anil

2016-02-01

A thermal modelling for the performance evaluation of gas turbine cogeneration system with reheat is presented in this paper. The Joule-Brayton cogeneration reheat cycle is based on the total useful energy rate (TUER) has been optimised and the efficiency at the maximum TUER is determined. The variation of maximum dimensionless TUER and efficiency at maximum TUER with respect to cycle temperature ratio have also been analysed. From the results, it has been found that the dimensionless maximum TUER and the corresponding thermal efficiency decrease with the increase in power to heat ratio. The result also shows that the inclusion of reheat significantly improves the overall performance of the cycle. From the thermodynamic performance point of view, this methodology may be quite useful in the selection and comparison of combined energy production systems.

Max '91: Flare research at the next solar maximum

NASA Technical Reports Server (NTRS)

Dennis, Brian; Canfield, Richard; Bruner, Marilyn; Emslie, Gordon; Hildner, Ernest; Hudson, Hugh; Hurford, Gordon; Lin, Robert; Novick, Robert; Tarbell, Ted

1988-01-01

To address the central scientific questions surrounding solar flares, coordinated observations of electromagnetic radiation and energetic particles must be made from spacecraft, balloons, rockets, and ground-based observatories. A program to enhance capabilities in these areas in preparation for the next solar maximum in 1991 is recommended. The major scientific issues are described, and required observations and coordination of observations and analyses are detailed. A program plan and conceptual budgets are provided.

40 CFR 421.266 - Pretreatment standards for new sources.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Subcategory Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/troy ounce of... day Maximum for monthly average mg/troy ounce of precious metals, in the granulated raw material... average mg/troy ounce of gold produced by cyanide stripping Copper 4.736 2.257 Cyanide (total) 0.740 0.296...

77 FR 15751 - Meetings of the Local Government Advisory Committee and the Small Communities Advisory Subcommittee

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-16

...The Small Communities Advisory Subcommittee (SCAS) will meet via teleconference on Tuesday, March 27, 2012, 2 p.m.-3 p.m. (ET), and the SCAS will meet at EPA's Region 8 office in Denver, CO, on Thursday, April 18, 2012, 3 p.m.-5 p.m. (MT). The Subcommittee will discuss decentralized wastewater treatment and other issues and recommendations to the Administrator regarding environmental issues affecting small communities. These are open meetings, and all interested persons are invited to participate. The Subcommittee will hear comments from the public during the teleconference on Tuesday, March 27, 2012 between 2:50 p.m. and 3 p.m. (ET) and during the meeting on Thursday, April 18, 2012 between 4:45 p.m. and 5 p.m. (MT). Individuals or organizations wishing to address the Subcommittee will be allowed a maximum of five minutes to present their point of view. Also, written comments should be submitted electronically to [email protected] Please contact the Designated Federal Officer (DFO) at the number listed below to schedule a time on the agenda. Time will be allotted on a first-come first-serve basis, and the total period for comments may be extended if the number of requests for appearances requires it. The Local Government Advisory Committee (LGAC) will meet at EPA's Region 8 office in Denver, CO, on Thursday, April 19, 2012, 10 a.m.- 4:15 p.m. (MT), and Friday, April 20, 2012, 9 a.m.-12 p.m. (MT). The Committee will discuss integrated water quality planning, hydraulic fracturing, air quality issues and environmental justice and Title VI. This is an open meeting and all interested persons are invited to participate. The Committee will hear comments from the public between 4 p.m.-4:15 p.m. (MT) on Thursday, April 19, 2012. Individuals or organizations wishing to address the Committee will be allowed a maximum of five minutes to present their point of view. Also, written comments should be submitted electronically to [email protected] Please contact the Designated Federal Officer (DFO) at the number listed below to schedule a time on the agenda. Time will be allotted on a first-come first-serve basis, and the total period for comments may be extended if the number of requests for appearances requires it.

20 CFR 229.48 - Family maximum.

Code of Federal Regulations, 2014 CFR

2014-04-01

... maximum. The spouse's and child(ren)'s share of the Overall Minimum PIA are reduced if the total benefits... adjustment is before adjustment for age or other benefits. The spouse and child(ren)'s benefits are computed...

20 CFR 229.48 - Family maximum.

Code of Federal Regulations, 2013 CFR

2013-04-01

... maximum. The spouse's and child(ren)'s share of the Overall Minimum PIA are reduced if the total benefits... adjustment is before adjustment for age or other benefits. The spouse and child(ren)'s benefits are computed...

20 CFR 229.48 - Family maximum.

Code of Federal Regulations, 2012 CFR

2012-04-01

... maximum. The spouse's and child(ren)'s share of the Overall Minimum PIA are reduced if the total benefits... adjustment is before adjustment for age or other benefits. The spouse and child(ren)'s benefits are computed...

Use of the Sequential Organ Failure Assessment score for evaluating outcome among obstetric patients admitted to the intensive care unit.

PubMed

Jain, Shruti; Guleria, Kiran; Suneja, Amita; Vaid, Neelam B; Ahuja, Sharmila

2016-03-01

To evaluate the prognostic value of the Sequential Organ Failure Assessment (SOFA) score among obstetric patients admitted to the intensive care unit (ICU). A prospective study was conducted among 90 consecutive obstetric patients who were admitted to the ICU of Guru Teg Bahadur Hospital, Delhi, India, between October 6, 2010, and December 25, 2011. Maximum SOFA score was calculated for each of the six organ systems. Receiver operating characteristic curves were used to determine critical cutoff values for total, maximum total, and mean total SOFA scores at various time points. Total SOFA score at admission displayed an area under the curve (AUC) of 0.949, a cutoff value of at least 8.5, sensitivity of 86.7%, and specificity of 90.0%. Maximum total SOFA score had an AUC of 0.980, a cutoff value of at least 10.0, sensitivity of 96.7%, and specificity of 90.0%. Mean total SOFA score had an AUC of 0.997, a cutoff value of at least 9.0, sensitivity of 96.7%, and specificity of 96.7%. In terms of discriminatory power for predicting mortality among obstetric patients admitted to the ICU, total SOFA score at admission was the most relevant, simple, and accurate measure. Copyright © 2015 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

Least Squares Approximation By G1 Piecewise Parametric Cubes

DTIC Science & Technology

1993-12-01

ADDRESS(ES) 10.SPONSORING/MONITORING AGENCY REPORT NUMBER 11. SUPPLEMENTARY NOTES The views expressed in this thesis are those of the author and do not...CODE Approved for public release; distribution is unlimited. 13. ABSTRACT (maximum 200 words) Parametric piecewise cubic polynomials are used throughout...piecewise parametric cubic polynomial to a sequence of ordered points in the plane. Cubic Bdzier curves are used as a basis. The parameterization, the

Balancing the Direct and Indirect Approaches: Implications for Ending the Violence in Southern Thailand

DTIC Science & Technology

2009-12-01

DIRECT AND INDIRECT APPROACHES: IMPLICATIONS FOR ENDING THE VIOLENCE IN SOUTHERN THAILAND by Chaiyo Rodthong December 2009 Thesis Advisor... Thailand 6. AUTHOR(S) Chaiyo Rodthong 5. FUNDING NUMBERS 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Naval Postgraduate School Monterey, CA...distribution is unlimited 12b. DISTRIBUTION CODE 13. ABSTRACT (maximum 200 words) The instability in the Southern Border Provinces of Thailand resurged on

Optimizing Mississippi aggregates for concrete bridge decks.

DOT National Transportation Integrated Search

2012-12-01

AASHTO M 43 Standard Specification for Sizes of Aggregate for Road and Bridge Construction : addresses particle size distribution of material included in various maximum nominal size aggregates. This : particle size distribution requires additi...

Effect of daily environmental temperature on farrowing rate and total born in dam line sows.

PubMed

Bloemhof, S; Mathur, P K; Knol, E F; van der Waaij, E H

2013-06-01

Heat stress is known to adversely affect reproductive performance of sows. However, it is important to know on which days or periods during the reproduction cycle heat stress has the greatest effects for designing appropriate genetic or management strategies. Therefore, this study was conducted to identify days and periods that have greatest effects on farrowing rate and total born of sows using 5 different measures of heat stress. The data consisted of 22,750 records on 5024 Dutch Yorkshire dam line sows from 16 farms in Spain and Portugal. Heat stress on a given day was measured in terms of maximum temperature, diurnal temperature range and heat load. The heat load was estimated using 3 definitions considering different upper critical temperatures. Identification of days during the reproduction cycle that had maximum effect was based on the Pearson correlation between the heat stress variable and the reproduction trait, estimated for each day during the reproduction cycle. Polynomial functions were fitted to describe the trends of these correlations and the days with greatest negative correlation were considered as days with maximum effect. Correlations were greatest for maximum temperature, followed by those for heat load and diurnal temperature range. Correlations for both farrowing rate and total born were stronger in gilts than in sows. This implies that heat stress has a stronger effect on reproductive performance of gilts than of sows. Heat stress during the third week (21 to 14 d) before first insemination had largest effect on farrowing rate. Heat stress during the period between 7 d before successful insemination until 12 d after that had largest effect on total born. Correlations between temperatures on consecutive days during these periods were extremely high ( > 0.9). Therefore, for farrowing rate the maximum temperature on 21 d before first insemination and for total born the maximum temperature at day of successful insemination can be used as predictive measures of heat stress in commercial sow farms. Additionally, differences between daughter groups of sires were identified in response to high temperatures. This might indicate possibilities for genetic selection on heat tolerance.

Total Quality Management Implementation Plan.

DTIC Science & Technology

1989-06-01

Quality Management Implementation Plan 6. AUTHOR(S) 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) 8. PERFORMING ORGANIZATION Defense General...E 14. SUBJECT TERMS 15. NUMBER OF PAGES TOM (Total Quality Management ), Continuous Process Improvement,_________ Depot Operations, Supply Support 16

Optimization of ultrasound-assisted extraction of phenolic compounds, antioxidants, and anthocyanins from grape (Vitis vinifera) seeds.

PubMed

Ghafoor, Kashif; Choi, Yong Hee; Jeon, Ju Yeong; Jo, In Hee

2009-06-10

Important functional components from Campbell Early grape seed were extracted by ultrasound-assisted extraction (UAE) technology. The experiments were carried out according to a five level, three variable central composite rotatable design (CCRD). The best possible combinations of ethanol concentration, extraction temperature, and extraction time with the application of ultrasound were obtained for the maximum extraction of phenolic compounds, antioxidant activities, and anthocyanins from grape seed by using response surface methodology (RSM). Process variables had significant effect on the extraction of functional components with extraction time being highly significant for the extraction of phenolics and antioxidants. The optimal conditions obtained by RSM for UAE from grape seed include 53.15% ethanol, 56.03 degrees C temperature, and 29.03 min time for the maximum total phenolic compounds (5.44 mg GAE/100 mL); 53.06% ethanol, 60.65 degrees C temperature, and 30.58 min time for the maximum antioxidant activity (12.31 mg/mL); and 52.35% ethanol, 55.13 degrees C temperature, and 29.49 min time for the maximum total anthocyanins (2.28 mg/mL). Under the above-mentioned conditions, the experimental total phenolics were 5.41 mg GAE/100 mL, antioxidant activity was 12.28 mg/mL, and total anthocyanins were 2.29 mg/mL of the grape seed extract, which is well matched with the predicted values.

40 CFR 421.262 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... pollutant property Maximum for any 1 day Maximum for monthly average mg/troy ounce of precious metals... day Maximum for monthly average mg/troy ounce of precious metal in the granulated raw material Copper... monthly average mg/troy ounce of gold produced by cyanide stripping Copper 7.030 3.700 Cyanide (total) 1...

DPSC (Defense Personnel Support Center) Total Quality Management Master Plan

DTIC Science & Technology

1989-07-01

SUBTITLE 5. FUNDING NUMBERS DPSC Total Quality Management Master Plan 6. AUTHOR(S) 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) B. PERFORMING...quality supported solider, sailor, airman and marine. % j cl 1 14. SUBJECT TERMS I 1S. NUMBER OF PAGES TQM (Total Quality Management ), Continuous...THE COMMANDER ON TOTAL QUALITY MANAGEMENT i SECTION I INTRODUCTION 1 II CONCEPTS 6 TQM Basics 7 Continuous Process Improvement 7 DoD TQM Philosophy 9

Multichannel/Multisensor Signal Processing In Uncertain Environments With Application To Multitarget Tracking.

DTIC Science & Technology

1998-05-22

NUMBER PR-98-1 T. SPONSORING / MONITORING AGENCY NAME(S) AND ADDRESS(ES) Office of Naval Research Ballston Center Tower One One North Quincy...unlimited. 12 b. DISTRIBUTION CODE 19980601 082 13. ABSTRACT (Maximum 200 words) This research project is concerned with two distinct aspects of analysis...Environments With Application To Multitarget Tracking This research project is concerned with two distinct aspects of analysis and processing of sig

Residential exposure to radiofrequency fields from mobile phone base stations, and broadcast transmitters: a population-based survey with personal meter.

PubMed

Viel, J F; Clerc, S; Barrera, C; Rymzhanova, R; Moissonnier, M; Hours, M; Cardis, E

2009-08-01

Both the public perceptions, and most published epidemiologic studies, rely on the assumption that the distance of a particular residence from a base station or a broadcast transmitter is an appropriate surrogate for exposure to radiofrequency fields, although complex propagation characteristics affect the beams from antennas. The main goal of this study was to characterise the distribution of residential exposure from antennas using personal exposure meters. A total of 200 randomly selected people were enrolled. Each participant was supplied with a personal exposure meter for 24 h measurements, and kept a time-location-activity diary. Two exposure metrics for each radiofrequency were then calculated: the proportion of measurements above the detection limit (0.05 V/m), and the maximum electric field strength. Residential address was geocoded, and distance from each antenna was calculated. Much of the time, the recorded field strength was below the detection level (0.05 V/m), the FM band standing apart with a proportion above the detection threshold of 12.3%. The maximum electric field strength was always lower than 1.5 V/m. Exposure to GSM and DCS waves peaked around 280 m and 1000 m from the antennas. A downward trend was found within a 10 km range for FM. Conversely, UMTS, TV 3, and TV 4&5 signals did not vary with distance. Despite numerous limiting factors entailing a high variability in radiofrequency exposure assessment, but owing to a sound statistical technique, we found that exposures from GSM and DCS base stations increase with distance in the near source zone, to a maximum where the main beam intersects the ground. We believe these results will contribute to the ongoing public debate over the location of base stations and their associated emissions.

Arsenic and arsenic species in shellfish and finfish from the western Arabian Gulf and consumer health risk assessment.

PubMed

Krishnakumar, Periyadan K; Qurban, Mohammad A; Stiboller, Michael; Nachman, Keeve E; Joydas, Thadickal V; Manikandan, Karuppasamy P; Mushir, Shemsi Ahsan; Francesconi, Kevin A

2016-10-01

This study reports the levels of total arsenic and arsenic species in marine biota such as clams (Meretrix meretrix; N=21) and pearl oyster (Pinctada radiata; N=5) collected from nine costal sites in Jan 2014, and cuttlefish (Sepia pharaonis; N=8), shrimp (Penaeus semisulcatus; N=1), and seven commercially important finfish species (N=23) collected during Apr-May 2013 from seven offshore sites in the western Arabian Gulf. Total As and As species such as dimethylarsinic acid (DMA), arsenobetaine (AB), trimethylarsine oxide (TMAO), arsenocholine (AC), tetramethylarsonium ion (Tetra), arsenosugar-glycerol (As-Gly) and inorganic As (iAs) were determined by using ICPMS and HPLC/ICPMS. In bivalves, the total As concentrations ranged from 16 to 118mg/kg dry mass; the toxic iAs fraction contributed on average less than 0.8% of the total As, while the nontoxic AB fraction formed around 58%. Total As concentrations for the remaining seafood (cuttlefish, shrimp and finfish) ranged from 11 to 134mg/kg dry mass and the iAs and AB fractions contributed on average 0.03% and 81% respectively of the total As. There was no significant relationship between the tissue concentrations of total As and iAs in the samples. There was also no significant relationship between As levels in seafood and geographical location or salinity of the waters from which samples were collected. Based on our results, we recommend introducing a maximum permissible level of arsenic in seafood from the Gulf based on iAs content rather than based on total As. Our analyses of cancer risks and non-cancer hazards identified non-negligible risks and the potential for hazards; the greatest risks were identified for expatriate consumers of bivalves and high-end consumers of seafood. Despite this, many uncertainties remain that would be best addressed by further analyses. Copyright © 2016 Elsevier B.V. All rights reserved.

Radio-tracking manatees from land and space: tag design, implementation, and lessons learned from long-term study

USGS Publications Warehouse

Deutsch, C.J.; Bonde, R.K.; Reid, J.P.

1998-01-01

West Indian manatees (Trichechus manatus) were tracked along the Atlantic coast of Florida and Georgia (N = 83 manatees, n = 439 tag deployments, 1986-1996) and in eastern Puerto Rico (N = 8, n = 43, 1992-1996) using conventional and satellite-based radio-telemetry systems. A floating radio-tag, attached by a flexible tether to a padded belt around the base of the tail, enabled us to track manatees in saltwater environments. The tag incorporated VHF (very high frequency) and ultrasonic transmitters for field tracking and tag recovery, and an Argos satellite-monitored transmitter for remote tracking. We located each animal in the field about twice per week, received more than 60 000 good-quality Argos locations, and recovered tags in over 90% of deployments. The tag was designed to detach from the belt when entangled to prevent injury or drowning, and this often led to premature termination of tracking bouts. We had considerable success, however, in retagging belted manatees without recapture (97% of 392 retagging events). Most individuals were radio-tagged more than once (median = 3.0, maximum = 43) for a median total duration of 7.5 months (maximum = 6.8 yr). Data obtained through Argos have been valuable in addressing questions relating to long-distance movements, site fidelity, and identification of high-use areas. Fine-scale analyses of manatee habitat use and movements may require restricting the data set to the highest location quality or developing new analytical techniques to incorporate locational error. Field tracking provided useful ancillary data on life-history parameters, but sample sizes were small and survival estimates imprecise. Modification of the existing tag design to include Global Positioning System (GPS) functionality, with its finer spatial and temporal resolution, will offer new opportunities to address critical research and management problems facing this endangered species.

Interannual variation in land-use intensity enhances grassland multidiversity

PubMed Central

Allan, Eric; Bossdorf, Oliver; Dormann, Carsten F.; Prati, Daniel; Gossner, Martin M.; Tscharntke, Teja; Blüthgen, Nico; Bellach, Michaela; Birkhofer, Klaus; Boch, Steffen; Böhm, Stefan; Börschig, Carmen; Chatzinotas, Antonis; Christ, Sabina; Daniel, Rolf; Diekötter, Tim; Fischer, Christiane; Friedl, Thomas; Glaser, Karin; Hallmann, Christine; Hodac, Ladislav; Hölzel, Norbert; Jung, Kirsten; Klein, Alexandra Maria; Klaus, Valentin H.; Kleinebecker, Till; Krauss, Jochen; Lange, Markus; Morris, E. Kathryn; Müller, Jörg; Nacke, Heiko; Pašalić, Esther; Rillig, Matthias C.; Rothenwöhrer, Christoph; Schall, Peter; Scherber, Christoph; Schulze, Waltraud; Socher, Stephanie A.; Steckel, Juliane; Steffan-Dewenter, Ingolf; Türke, Manfred; Weiner, Christiane N.; Werner, Michael; Westphal, Catrin; Wolters, Volkmar; Wubet, Tesfaye; Gockel, Sonja; Gorke, Martin; Hemp, Andreas; Renner, Swen C.; Schöning, Ingo; Pfeiffer, Simone; König-Ries, Birgitta; Buscot, François; Linsenmair, Karl Eduard; Schulze, Ernst-Detlef; Weisser, Wolfgang W.; Fischer, Markus

2014-01-01

Although temporal heterogeneity is a well-accepted driver of biodiversity, effects of interannual variation in land-use intensity (LUI) have not been addressed yet. Additionally, responses to land use can differ greatly among different organisms; therefore, overall effects of land-use on total local biodiversity are hardly known. To test for effects of LUI (quantified as the combined intensity of fertilization, grazing, and mowing) and interannual variation in LUI (SD in LUI across time), we introduce a unique measure of whole-ecosystem biodiversity, multidiversity. This synthesizes individual diversity measures across up to 49 taxonomic groups of plants, animals, fungi, and bacteria from 150 grasslands. Multidiversity declined with increasing LUI among grasslands, particularly for rarer species and aboveground organisms, whereas common species and belowground groups were less sensitive. However, a high level of interannual variation in LUI increased overall multidiversity at low LUI and was even more beneficial for rarer species because it slowed the rate at which the multidiversity of rare species declined with increasing LUI. In more intensively managed grasslands, the diversity of rarer species was, on average, 18% of the maximum diversity across all grasslands when LUI was static over time but increased to 31% of the maximum when LUI changed maximally over time. In addition to decreasing overall LUI, we suggest varying LUI across years as a complementary strategy to promote biodiversity conservation. PMID:24368852

DRMS (Defense Reutilization and Marketing Service) Total Quality Management (TQM) Implementation Plan

DTIC Science & Technology

1989-07-01

FUNDING NUMBERS DRMS Total Quality Management (TQM) Implementation Plan 6. AUTHOR(S) 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) 8. PERFORMING...OF PAGES TOM (Total Quality Management ), Continuous Process Improvement. ’f’ - Management 16. PRICE CODE 17. SECURITY CLASSIFICATION 18. SECURITY...7540-01-280-5500 Standard Form 298 (Rev. 2-89) Pr"cried by ANi SWt 139-i 296-101 DRMS TOTAL QUALITY MANAGEMENT (TQM) IMPLEMENTATION PLAN PURPOSE The

Defense reactions of bean genotypes to bacterial pathogens in controlled conditions

NASA Astrophysics Data System (ADS)

Uysal, B.; Bastas, K. K.

2018-03-01

This study was focused on the role of antioxidant enzymes and total protein in imparting resistance against common bacterial blight caused by Xanthomonas axonopodis pv. phaseoli (Xap) and halo blight caused by Pseudomonas syringae pv. phaseolicola (Psp) in bean. Activities of Ascorbate peroxidase (APX), Catalase (CAT) and total protein were studied in resistant and susceptible bean genotypes. Five-day-old seedlings were inoculated with a bacterial suspension (108 CFU ml-1) and harvested at different time intervals (0, 12, 24 and 36 up to 72 h) under controlled growing conditions and assayed for antioxidant enzymes and total protein. Temporal increase of CAT, APX enzymes activities showed maximum activity at 12 h after both pathogens inoculation (hpi) in resistant cultivar, whereas in susceptible it increased at 72 h after both pathogens inoculation for CAT and 12, 24 h for APX enzymes. Maximum total protein activities were observed at 12 h and 24 h respectively after Xap, Psp inoculation (hpi) in resistant and maximum activities were observed at 24 h and 72 h respectively after Xap, Psp inoculation (hpi) in susceptible. Increase of antioxidant enzyme and total protein activities might be an important component in the defense strategy of resistance and susceptible bean genotypes against the bacterial infection. These findings suggest that disease protection is proportional to the amount of enhanced CAT, APX enzyme and total protein activity.

77 FR 15094 - Sawatt Hydroelectric, LLC; Notice of Application for Amendment of Exemption and Soliciting...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-14

... maximum hydraulic capacity of 331 cubic feet per second (cfs), to two generating units with a total installed capacity of 321 kW and a maximum hydraulic capacity of 333 cfs. The two units are: One existing unit rated at 225 kW with a maximum hydraulic capacity of 233 cfs and one proposed unit to be installed...

Nutrient input from the Loxahatchee River Environmental Control District sewage-treatment plant to the Loxahatchee River Estuary, southeastern Florida

USGS Publications Warehouse

Sonntag, W.H.; McPherson, B.F.

1984-01-01

Two test discharges of treated-sewage effluent were made to the Loxahatchee River in February and September 1981 from the ENCON sewage-treatment plant to document nutrient loading and downstream transport of the effluent to the estuary under maximum daily discharge allowable by law (4 million gallons per day). Concentrations of total nitrogen in the effluent exceeded background concentrations by as much as 7 times during the February test, while concentrations of total phosphorus exceeded background concentrations by as much as 112 times during the September test. The effluent was transported downstream to the estuary in less than 24 hours. Discharge of treated sewage effluent to the river-estuary system in the 1981 water year accounted for less than 0.5 percent of the total nitrogen and 8 percent of the total phosphorus discharged from the major tributaries to the estuary. If maximum discharges of effluent (4 million gallons per day) were sustained throughout the year, annual nitrogen loading from the effluent would account for 5 to 18 percent of the total nitrogen input by the major tributaries to the estuary. With maximum discharges of effluent, annual phosphorus loading would exceed the amount of phosphorus input by the major tributaries to the estuary by 54 to 167 percent. (USGS)

Integration of air traffic databases : a case study

DOT National Transportation Integrated Search

1995-03-01

This report describes a case study to show the benefits from maximum utilization of existing air traffic databases. The study demonstrates the utility of integrating available data through developing and demonstrating a methodology addressing the iss...

Software Update.

ERIC Educational Resources Information Center

Currents, 2000

2000-01-01

A chart of 40 alumni-development database systems provides information on vendor/Web site, address, contact/phone, software name, price range, minimum suggested workstation/suggested server, standard reports/reporting tools, minimum/maximum record capacity, and number of installed sites/client type. (DB)

Extremes in Otolaryngology Resident Surgical Case Numbers: An Update.

PubMed

Baugh, Tiffany P; Franzese, Christine B

2017-06-01

Objectives The purpose of this study is to examine the effect of minimum case numbers on otolaryngology resident case log data and understand differences in minimum, mean, and maximum among certain procedures as a follow-up to a prior study. Study Design Cross-sectional survey using a national database. Setting Academic otolaryngology residency programs. Subjects and Methods Review of otolaryngology resident national data reports from the Accreditation Council for Graduate Medical Education (ACGME) resident case log system performed from 2004 to 2015. Minimum, mean, standard deviation, and maximum values for total number of supervisor and resident surgeon cases and for specific surgical procedures were compared. Results The mean total number of resident surgeon cases for residents graduating from 2011 to 2015 ranged from 1833.3 ± 484 in 2011 to 2072.3 ± 548 in 2014. The minimum total number of cases ranged from 826 in 2014 to 1004 in 2015. The maximum total number of cases increased from 3545 in 2011 to 4580 in 2015. Multiple key indicator procedures had less than the required minimum reported in 2015. Conclusion Despite the ACGME instituting required minimum numbers for key indicator procedures, residents have graduated without meeting these minimums. Furthermore, there continues to be large variations in the minimum, mean, and maximum numbers for many procedures. Variation among resident case numbers is likely multifactorial. Ensuring proper instruction on coding and case role as well as emphasizing frequent logging by residents will ensure programs have the most accurate data to evaluate their case volume.

High-bandwidth prefetcher for high-bandwidth memory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mehta, Sanyam; Kohn, James Robert; Ernst, Daniel Jonathan

A method for prefetching data into a cache is provided. The method allocates an outstanding request buffer ("ORB"). The method stores in an address field of the ORB an address and a number of blocks. The method issues prefetch requests for a degree number of blocks starting at the address. When a prefetch response is received for all the prefetch requests, the method adjusts the address of the next block to prefetch and adjusts the number of blocks remaining to be retrieved and then issues prefetch requests for a degree number of blocks starting at the adjusted address. The prefetchingmore » pauses when a maximum distance between the reads of the prefetched blocks and the last prefetched block is reached. When a read request for a prefetched block is received, the method resumes prefetching when a resume criterion is satisfied.« less

Apparatus and method for classifying fuel pellets for nuclear reactor

DOEpatents

Wilks, Robert S.; Sternheim, Eliezer; Breakey, Gerald A.; Sturges, Jr., Robert H.; Taleff, Alexander; Castner, Raymond P.

1984-01-01

Control for the operation of a mechanical handling and gauging system for nuclear fuel pellets. The pellets are inspected for diameters, lengths, surface flaws and weights in successive stations. The control includes, a computer for commanding the operation of the system and its electronics and for storing and processing the complex data derived at the required high rate. In measuring the diameter, the computer enables the measurement of a calibration pellet, stores that calibration data and computes and stores diameter-correction factors and their addresses along a pellet. To each diameter measurement a correction factor is applied at the appropriate address. The computer commands verification that all critical parts of the system and control are set for inspection and that each pellet is positioned for inspection. During each cycle of inspection, the measurement operation proceeds normally irrespective of whether or not a pellet is present in each station. If a pellet is not positioned in a station, a measurement is recorded, but the recorded measurement indicates maloperation. In measuring diameter and length a light pattern including successive shadows of slices transverse for diameter or longitudinal for length are projected on a photodiode array. The light pattern is scanned electronically by a train of pulses. The pulses are counted during the scan of the lighted diodes. For evaluation of diameter the maximum diameter count and the number of slices for which the diameter exceeds a predetermined minimum is determined. For acceptance, the maximum must be less than a maximum level and the minimum must exceed a set number. For evaluation of length, the maximum length is determined. For acceptance, the length must be within maximum and minimum limits.

Extreme daily precipitation: the case of Serbia in 2014

NASA Astrophysics Data System (ADS)

Tošić, Ivana; Unkašević, Miroslava; Putniković, Suzana

2017-05-01

The extreme daily precipitation in Serbia was examined at 16 stations during the period 1961-2014. Two synoptic situations in May and September of 2014 were analysed, when extreme precipitation was recorded in western and eastern Serbia, respectively. The synoptic situation from 14 to 16 May 2014 remained nearly stationary over the western and central Serbia for the entire period. On 15 May 2014, the daily rainfall broke previous historical records in Belgrade (109.8 mm), Valjevo (108.2 mm) and Loznica (110 mm). Precipitation exceeded 200 mm in 72 h, producing the most catastrophic floods in the recent history of Serbia. In Negotin (eastern Serbia), daily precipitation of 161.3 mm was registered on 16 September 2014, which was the maximum value recorded during the period 1961-2014. The daily maximum in 2014 was registered at 6 out of 16 stations. The total annual precipitation for 2014 was the highest for the period 1961-2014 at almost all stations in Serbia. A non-significant positive trend was found for all precipitation indices: annual daily maximum precipitation, the total precipitation in consecutive 3 and 5 days, the total annual precipitation, and number of days with at least 10 and 20 mm of precipitation. The generalised extreme value distribution was fitted to the annual daily maximum precipitation. The estimated 100-year return levels were 123.4 and 147.4 mm for the annual daily maximum precipitation in Belgrade and Negotin, respectively.

A Review of System Identification Methods Applied to Aircraft

NASA Technical Reports Server (NTRS)

Klein, V.

1983-01-01

Airplane identification, equation error method, maximum likelihood method, parameter estimation in frequency domain, extended Kalman filter, aircraft equations of motion, aerodynamic model equations, criteria for the selection of a parsimonious model, and online aircraft identification are addressed.

Optimal traffic resource allocation and management.

DOT National Transportation Integrated Search

2010-05-01

"In this paper, we address the problem of determining the patrol routes of state troopers for maximum coverage of : highway spots with high frequencies of crashes (hot spots). We develop a mixed integer linear programming model : for this problem und...

Alcohol-Related Blackouts, Negative Alcohol-Related Consequences, and Motivations for Drinking Reported by Newly Matriculating Transgender College Students.

PubMed

Tupler, Larry A; Zapp, Daniel; DeJong, William; Ali, Maryam; O'Rourke, Sarah; Looney, John; Swartzwelder, H Scott

2017-05-01

Many transgender college students struggle with identity formation and other emotional, social, and developmental challenges associated with emerging adulthood. A potential maladaptive coping strategy employed by such students is heavy drinking. Prior literature has suggested greater consumption and negative alcohol-related consequences (ARCs) in transgender students compared with their cisgender peers, but little is known about their differing experiences with alcohol-related blackouts (ARBs). We examined the level of alcohol consumption, the frequency of ARBs and other ARCs, and motivations for drinking reported by the largest sample of transgender college students to date. A Web survey from an alcohol-prevention program, AlcoholEdu for College™, assessed student demographics and drinking-related behaviors, experiences, and motivations of newly matriculating first-year college students. A self-reported drinking calendar was used to examine each of the following measures over the previous 14 days: number of drinking days, total number of drinks, and maximum number of drinks on any single day. A 7-point Likert scale was used to measure ARCs, ARBs, and drinking motivations. Transgender students of both sexes were compared with their cisgender peers. A total of 989 of 422,906 students (0.2%) identified as transgender. Over a 14-day period, transgender compared with cisgender students were more likely to consume alcohol over more days, more total drinks, and a greater number of maximum drinks on a single day. Transgender students (36%) were more likely to report an ARB than cisgender students (25%) as well as more negative academic, confrontation-related, social, and sexual ARCs. Transgender respondents more often cited stress reduction, social anxiety, self-esteem issues, and the inherent properties of alcohol as motivations for drinking. For nearly all measures, higher values were yielded by male-to-female than female-to-male transgender students. Transgender compared with cisgender first-year students engage in higher-risk drinking patterns and experience more ARBs and other negative ARCs. Broad institutional efforts are required to address the unique circumstances of transgender men and women and to reduce negative ARCs in college students, regardless of their sex or gender identity. Copyright © 2017 by the Research Society on Alcoholism.

40 CFR 418.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... exceed— Total phosphorus (as P) 105 35 Fluoride 75 25 TSS 150 50 The total suspended solid limitation set...) Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed— Total phosphorus...

40 CFR 418.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... exceed— Total phosphorus (as P) 105 35 Fluoride 75 25 TSS 150 50 The total suspended solid limitation set...) Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed— Total phosphorus...

A Score to Identify Patients with Brain Metastases from Colorectal Cancer Who May Benefit from Whole-brain Radiotherapy in Addition to Stereotactic Radiosurgery/Radiotherapy.

PubMed

Rades, Dirk; Dziggel, Liesa; Blanck, Oliver; Gebauer, Niklas; Bartscht, Tobias; Schild, Steven E

2018-05-01

To design a tool to predict the probability of new cerebral lesions after stereotactic radiosurgery/radiotherapy for patients with 1-3 brain metastases from colorectal cancer. In 21 patients, nine factors were evaluated for freedom from new brain metastases, namely age, gender, Karnofsky performance score (KPS), tumor type, number, maximum total diameter of all lesions and sites of cerebral lesions, extra-cranial metastases, and time from cancer diagnosis to irradiation. Freedom from new lesions was positively associated with KPS of 90-100 (p=0.013); maximum total diameter ≤15 mm showed a trend for positive association (p=0.09). Points were assigned as: KPS 70-80=1 point, KPS 90-100=2 points, maximum diameter ≤15 mm=2 points and maximum diameter >15 mm=1 point. Six-month rates of freedom from new lesions were 29%, 45% and 100% for those with total scores of 2, 3 and 4 points, respectively, with corresponding 12-month rates of 0%, 45% and 100% (p=0.027). This study identified three risk groups regarding new brain metastases after stereotactic irradiation. Patients with 2 points could benefit from additional whole-brain radiotherapy. Copyright© 2018, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

EPA Office of Water (OW): Impaired Waters with TMDLs NHDPlus Indexed Dataset

EPA Pesticide Factsheets

The Total Maximum Daily Load (TMDL) Tracking System contains information on waters that are Not Supporting their designated uses. These waters are listed by the state as impaired under Section 303(d) of the Clean Water Act. The status of TMDLs are also tracked. TMDLs are pollution control measures that reduce the discharge of pollutants into impaired waters. A TMDL or Total Maximum Daily Load is a calculation of the maximum amount of a pollutant that a waterbody can receive and still meet water quality standards, and an allocation of that amount to the pollutant's sources. What is a total maximum daily load (TMDL)? Water quality standards are set by States, Territories, and Tribes. They identify the uses for each waterbody, for example, drinking water supply, contact recreation (swimming), and aquatic life support (fishing), and the scientific criteria to support that use. A TMDL is the sum of the allowable loads of a single pollutant from all contributing point and nonpoint sources. The calculation must include a margin of safety to ensure that the waterbody can be used for the purposes the state has designated. The calculation must also account for seasonal variation in water quality. The Clean Water Act, section 303, establishes the water quality standards and TMDL programs.

Estimating population diversity with CatchAll

PubMed Central

Bunge, John; Woodard, Linda; Böhning, Dankmar; Foster, James A.; Connolly, Sean; Allen, Heather K.

2012-01-01

Motivation: The massive data produced by next-generation sequencing require advanced statistical tools. We address estimating the total diversity or species richness in a population. To date, only relatively simple methods have been implemented in available software. There is a need for software employing modern, computationally intensive statistical analyses including error, goodness-of-fit and robustness assessments. Results: We present CatchAll, a fast, easy-to-use, platform-independent program that computes maximum likelihood estimates for finite-mixture models, weighted linear regression-based analyses and coverage-based non-parametric methods, along with outlier diagnostics. Given sample ‘frequency count’ data, CatchAll computes 12 different diversity estimates and applies a model-selection algorithm. CatchAll also derives discounted diversity estimates to adjust for possibly uncertain low-frequency counts. It is accompanied by an Excel-based graphics program. Availability: Free executable downloads for Linux, Windows and Mac OS, with manual and source code, at www.northeastern.edu/catchall. Contact: jab18@cornell.edu PMID:22333246

Is hydroxyapatite a reliable fixation option in unicompartmental knee arthroplasty? A 5- to 13-year experience with the hydroxyapatite-coated unix prosthesis.

PubMed

Epinette, Jean-Alain; Manley, Michael T

2008-10-01

Hydroxyapatite-coated unicompartmental knee arthroplasty (UKA) is a debatable approach to unicompartmental knee arthritis because UKA isoften viewed as a short-term solution, at best, fora condition that will eventually require a total knee arthroplasty (TKA). Unicompartmental knee arthroplasty is a more technically demanding procedure than TKA, and appropriate patient selection, careful surgical technique, and correct choice of implant geometry are all critical components to its success. A fundamental issue surrounding UKA is whether hydroxyapatite-coated unicompartmental components can provide a long-term solution to unicondylar arthritis. We address this issue in the current study, which is based on a prospective series of 125 hydroxyapatite-coated Unix knee prostheses implanted consecutively between 1994 and 2002, with a 5-year minimum follow-up and a 13-year maximum follow-up. The results of our study indicate that uncemented hydroxyapatite-coated UKA can be successful in the long term.

Assessment of exposure to EMF in a Danish case-control study of childhood cancer.

PubMed

Jensen, J K; Olsen, J H; Folkersen, E

1994-01-01

In Denmark it is permitted to draw overhead lines across residential areas. In connection with a Danish case-control study we developed a method for estimating the historical values of magnetic fields at residences. The study included 1,707 cases with childhood cancer and 4,788 matched population controls. A total of 16,082 different addresses had been occupied by the families from the time of conception until the date of diagnosis. The values of the extreme, maximum, middle and minimum 50 Hz magnetic field strengths originating from a 50-400 kV high-voltage installation were estimated for each of the dwellings included in a potential exposure area. 30 children were exposed to an average level of magnetic fields of 0.1 microT or more. The evaluated Danish method of exposure assessment was compared with the method for residential wiring codes developed by Wertheimer and Leeper /1/. We concluded that the US wiring codes are inappropriate for use in connection with the Danish electricity transmission system.

Integrated mangrove-shrimp cultivation: Potential for blue carbon sequestration.

PubMed

Ahmed, Nesar; Thompson, Shirley; Glaser, Marion

2018-05-01

Globally, shrimp farming has had devastating effects on mangrove forests. However, mangroves are the most carbon-rich forests, with blue carbon (i.e., carbon in coastal and marine ecosystems) emissions seriously augmented due to devastating effects on mangrove forests. Nevertheless, integrated mangrove-shrimp cultivation has emerged as a part of the potential solution to blue carbon emissions. Integrated mangrove-shrimp farming is also known as organic aquaculture if deforested mangrove area does not exceed 50% of the total farm area. Mangrove destruction is not permitted in organic aquaculture and the former mangrove area in parts of the shrimp farm shall be reforested to at least 50% during a period of maximum 5 years according to Naturland organic aquaculture standards. This article reviews integrated mangrove-shrimp cultivation that can help to sequester blue carbon through mangrove restoration, which can be an option for climate change mitigation. However, the adoption of integrated mangrove-shrimp cultivation could face several challenges that need to be addressed in order to realize substantial benefits from blue carbon sequestration.

A composite-flywheel burst-containment study

NASA Astrophysics Data System (ADS)

Sapowith, A. D.; Handy, W. E.

1982-01-01

A key component impacting total flywheel energy storage system weight is the containment structure. This report addresses the factors that shape this structure and define its design criteria. In addition, containment weight estimates are made for the several composite flywheel designs of interest so that judgements can be made as to the relative weights of their containment structure. The requirements set down for this program were that all containment weight estimates be based on a 1 kWh burst. It should be noted that typical flywheel requirements for regenerative braking of small automobiles call for deliverable energies of 0.25 kWh. This leads to expected maximum burst energies of 0.5 kWh. The flywheels studied are those considered most likely to be carried further for operational design. These are: The pseudo isotropic disk flywheel, sometimes called the alpha ply; the SMC molded disk; either disk with a carbon ring; the subcircular rim with cruciform hub; and Avco's bi-directional circular weave disk.

Optimum data analysis procedures for Titan 4 and Space Shuttle payload acoustic measurements during lift-off

NASA Technical Reports Server (NTRS)

Piersol, Allan G.

1991-01-01

Analytical expressions have been derived to describe the mean square error in the estimation of the maximum rms value computed from a step-wise (or running) time average of a nonstationary random signal. These analytical expressions have been applied to the problem of selecting the optimum averaging times that will minimize the total mean square errors in estimates of the maximum sound pressure levels measured inside the Titan IV payload fairing (PLF) and the Space Shuttle payload bay (PLB) during lift-off. Based on evaluations of typical Titan IV and Space Shuttle launch data, it has been determined that the optimum averaging times for computing the maximum levels are (1) T (sub o) = 1.14 sec for the maximum overall level, and T(sub oi) = 4.88 f (sub i) (exp -0.2) sec for the maximum 1/3 octave band levels inside the Titan IV PLF, and (2) T (sub o) = 1.65 sec for the maximum overall level, and T (sub oi) = 7.10 f (sub i) (exp -0.2) sec for the maximum 1/3 octave band levels inside the Space Shuttle PLB, where f (sub i) is the 1/3 octave band center frequency. However, the results for both vehicles indicate that the total rms error in the maximum level estimates will be within 25 percent the minimum error for all averaging times within plus or minus 50 percent of the optimum averaging time, so a precise selection of the exact optimum averaging time is not critical. Based on these results, linear averaging times (T) are recommended for computing the maximum sound pressure level during lift-off.

40 CFR 142.63 - Variances and exemptions from the maximum contaminant level for total coliforms.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) EPA has stayed the effective date of this section relating to the total coliform MCL of § 141.63(a) of this chapter for systems that demonstrate to the State that the violation of the total coliform MCL is...

Blood biochemistry and immune response in Aseel chicken under free range, semi-intensive, and confinement rearing systems.

PubMed

Rehman, M S; Mahmud, A; Mehmood, S; Pasha, T N; Hussain, J; Khan, M T

2017-01-01

A study was conducted to investigate the effects of 3 different rearing systems [free range ( FR: ), semi-intensive ( SI: ), and confinement ( CF: )] on blood biochemical profile and immune response in 4 varieties of Aseel chicken [Lakha ( LK: ), Mushki ( MS: ), Peshawari ( PW: ) and Sindhi ( SN: )] for 10 wk duration (7 to 16 wk). At the age of 6 wk, in total, 180 cockerels were assigned to 12 treatment groups, 3 (rearing system) × 4 (Aseel chicken variety) factorial arrangement in 7 randomized complete blocks, replicated 3 times with 5 birds in each replicate (45 birds of each variety; 60 birds in each rearing system; 36 total replicates). Blood samples were collected through brachial vein at the end of wk 16. After laboratory analysis, the recorded data for blood biochemical profile and immune response were analyzed by using 2-way ANOVA under factorial arrangement. The results showed higher (P < 0.05) plasma glucose and total protein in birds under CF. Titer against Newcastle disease virus ( NDV: ) and infectious bronchitis virus ( IBV: ) was found to be greater (P < 0.05) in SI and FR, respectively. Peshawari birds indicated higher (P < 0.05) concentration of glucose, total protein, albumin, uric acid, creatinine, and titers to NDV and IBV. Birds of LK and SN varieties also indicated maximum antibody titer against NDV and IBV, respectively. Cholesterol level was found to be greater (P < 0.05) in birds of LK and SN. Interaction of SN with FR revealed maximum (P < 0.05) cholesterol whereas interaction of PW with SI indicated maximum antibody titer against NDV. The results highlight that CF rearing system expediently affects glucose and total protein levels in birds; SI and FR confer maximum antibody titers to NDV and IBV. Birds of PW variety indicated higher glucose, total protein, albumin, uric acid, and creatinine, the lowest cholesterol under FR and the enhanced antibody titer against NDV and IBV. © 2016 Poultry Science Association Inc.

Sucrose-enhanced biosynthesis of medicinally important antioxidant secondary metabolites in cell suspension cultures of Artemisia absinthium L.

PubMed

Ali, Mohammad; Abbasi, Bilal Haider; Ahmad, Nisar; Ali, Syed Shujait; Ali, Shahid; Ali, Gul Shad

2016-12-01

Natural products are gaining tremendous importance in pharmaceutical industry and attention has been focused on the applications of in vitro technologies to enhance yield and productivity of such products. In this study, we investigated the accumulation of biomass and antioxidant secondary metabolites in response to different carbohydrate sources (sucrose, maltose, fructose and glucose) and sucrose concentrations (1, 3, 5, 7 and 9 %). Moreover, the effects of 3 % repeated sucrose feeding (day-12, -18 and -24) were also investigated. The results showed the superiority of disaccharides over monosaccharides for maximum biomass and secondary metabolites accumulation. Comparable profiles for maximum biomass were observed in response to sucrose and maltose and initial sucrose concentrations of 3 and 5 %. Maximum total phenolic and total flavonoid contents were displayed by cultures treated with sucrose and maltose; however, initial sucrose concentrations of 5 and 7 % were optimum for both classes of metabolites, respectively. Following 3 % extra sucrose feeding, cultures fed on day-24 (late-log phase) showed higher biomass, total phenolic and total flavonoid contents as compared to control cultures. Highest antioxidant activity was exhibited by maltose-treated cultures. Moreover, sucrose-treated cultures displayed positive correlation of antioxidant activity with total phenolics and total flavonoids production. This work describes the stimulatory role of disaccharides and sucrose feeding strategy for higher accumulation of phenolics and flavonoids, which could be potentially scaled up to bioreactor level for the bulk production of these metabolites in suspension cultures of A. absinthium.

Methods for Intelligent Mapping of the IPV6 Address Space

DTIC Science & Technology

2015-03-01

the " Internet of Things " ( IoT ). (2013, Jan. 7). Forbes. [Online]. Available: http://www.forbes.com/sites/quora/2013/01/07/ how-many- things -are...currently-connected-to-the- internet -of- things - iot / 57 [13] G. Huston, “IPv4 address report,” Mar 2015. [Online]. Available: http://www.potaroo.net/tools/ipv4...distribution is unlimited 12b. DISTRIBUTION CODE 13. ABSTRACT (maximum 200 words) Due to the rapid growth of the Internet , the available pool of unique

Hydrostatic and Hydrodynamic Analysis of a Lengthened DDG-51 Destroyer Modified Repeat

DTIC Science & Technology

2010-06-01

4.5 nm, and begins firing at 1 nm with a maximum probable kill at 460 m . The system can react in 3 seconds, has a muzzle velocity of 1,030 m / s , fires...of the barrel is approximately 800 m / s with a max altitude of 15,000 m . The five-inch, 62-caliber gun can fire conventional, Improved Conventional...CA 93943-5000 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING /MONITORING AGENCY NAME( S ) AND ADDRESS(ES) N/ A 10. SPONSORING

The Occupational Health Nurse (OHN) and the Implications for Nursing Education

DTIC Science & Technology

1992-01-01

539-556. Yancey, W. B., Jr ., & Williams , R. C. Jr . (1991). Laboratory tests for rheumatic diseases. Postgraduate Medici., _U(2), 93-6, 99-100, 103. OHN...034 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSORING/MONITORING AGENCY REPORT NUMBER AFIT/CI Wright- Patterson AFB OH 45433-6583 11... ERNEST A. HAYGOOD, Captain, USAF Executive Officer 13. ABSTRACT (Maximum 200 words) OTIC .1111UfMON BTATEBM~ A ELECTE AfwY I"m" pu~ " r ~DTIC v𔃽 92-17995

40 CFR 421.324 - Standards of performance for new sources.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY Secondary Uranium... Uranium Subcategory Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of uranium processed in the refinery Chromium (total) 27.14 11.00...

40 CFR 421.324 - Standards of performance for new sources.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY Secondary Uranium... Uranium Subcategory Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of uranium processed in the refinery Chromium (total) 27.14 11.00...

40 CFR 421.324 - Standards of performance for new sources.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY Secondary Uranium... Uranium Subcategory Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of uranium processed in the refinery Chromium (total) 27.14 11.00...

Navigation-based femorotibial rotation pattern correlated with flexion angle after total knee arthroplasty.

PubMed

Ishida, Kazunari; Shibanuma, Nao; Matsumoto, Tomoyuki; Sasaki, Hiroshi; Takayama, Koji; Matsuzaki, Tokio; Tei, Katsumasa; Kuroda, Ryosuke; Kurosaka, Masahiro

2016-01-01

To investigate whether intraoperative kinematics obtained by navigation systems can be divided into several kinematic patterns and to assess the correlation between the intraoperative kinematics with maximum flexion angles before and after total knee arthroplasty (TKA). Fifty-four posterior-stabilised (PS) TKA implanted using an image-free navigation system were evaluated. At registration and after implantation, tibial internal rotation angles at maximum extension, 30°, 45°, 60°, 90°, and maximum flexion were collected. The rotational patterns were divided into four groups and were examined the correlation with maximum flexion before and after operation. Tibial internal rotation from 90° of flexion to maximum flexion at registration was correlated with maximum flexion angles pre- and postoperatively. The four groups showed statistically different kinematic patterns. The group with tibial external rotation up to 90° of flexion, following tibial internal rotation at registration, achieved better flexion angles, compared to those of another groups (126.7° ± 12.0°, p < 0.05). The group with tibial external rotation showed the worst flexion angles (80.0° ± 40.4°, p < 0.05). Furthermore, the group with limited extension showed worse flexion angles (111.6° ± 8.9°, p < 0.05). Navigation-based kinematic patterns found at registration predict postoperative maximum flexion angle in PS TKA. Navigation-based kinematics can be useful information during TKA surgery. Diagnostic studies, development of diagnostic criteria in a consecutive series of patients and a universally applied "gold" standard, Level II.

40 CFR Table 4 to Subpart Ooo of... - Operating Parameter Levels

Code of Federal Regulations, 2011 CFR

2011-07-01

... specific gravity Condenser Exit temperature Maximum temperature Carbon absorber Total regeneration steam or nitrogen flow, or pressure (gauge or absolute) a during carbon bed regeneration cycle; and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s)) Maximum...

40 CFR Table 4 to Subpart Ooo of... - Operating Parameter Levels

Code of Federal Regulations, 2013 CFR

2013-07-01

... specific gravity Condenser Exit temperature Maximum temperature Carbon absorber Total regeneration steam or nitrogen flow, or pressure (gauge or absolute) a during carbon bed regeneration cycle; and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s)) Maximum...

40 CFR Table 4 to Subpart Ooo of... - Operating Parameter Levels

Code of Federal Regulations, 2014 CFR

2014-07-01

... specific gravity Condenser Exit temperature Maximum temperature Carbon absorber Total regeneration steam or nitrogen flow, or pressure (gauge or absolute) a during carbon bed regeneration cycle; and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s)) Maximum...

21 CFR 331.11 - Listing of specific active ingredients.

Code of Federal Regulations, 2013 CFR

2013-04-01

... contributing at least 25 percent of the total acid neutralizing capacity; maximum daily dosage limit is 8 grams...., 8 grams calcium carbonate). (e) Citrate-containing active ingredients: Citrate ion, as citric acid or salt; maximum daily dosage limit 8 grams. (f) Glycine (aminoacetic acid). (g) Magnesium-containing...

46 CFR 148.220 - Ammonium nitrate-phosphate fertilizers.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 5 2012-10-01 2012-10-01 false Ammonium nitrate-phosphate fertilizers. 148.220 Section... § 148.220 Ammonium nitrate-phosphate fertilizers. (a) This section applies to the stowage and... nitrate and containing a maximum of 0.4 percent total added combustible material or containing a maximum...

46 CFR 148.220 - Ammonium nitrate-phosphate fertilizers.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Ammonium nitrate-phosphate fertilizers. 148.220 Section... § 148.220 Ammonium nitrate-phosphate fertilizers. (a) This section applies to the stowage and... nitrate and containing a maximum of 0.4 percent total added combustible material or containing a maximum...

46 CFR 148.220 - Ammonium nitrate-phosphate fertilizers.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 5 2013-10-01 2013-10-01 false Ammonium nitrate-phosphate fertilizers. 148.220 Section... § 148.220 Ammonium nitrate-phosphate fertilizers. (a) This section applies to the stowage and... nitrate and containing a maximum of 0.4 percent total added combustible material or containing a maximum...

46 CFR 148.220 - Ammonium nitrate-phosphate fertilizers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 5 2011-10-01 2011-10-01 false Ammonium nitrate-phosphate fertilizers. 148.220 Section... § 148.220 Ammonium nitrate-phosphate fertilizers. (a) This section applies to the stowage and... nitrate and containing a maximum of 0.4 percent total added combustible material or containing a maximum...

ANSI Standard: Complying with Background Noise Limits.

ERIC Educational Resources Information Center

Schaffer, Mark E.

2003-01-01

Discusses the new classroom acoustics standard, ANSI Standard S12.60, which specifies maximum sound level limits that are significantly lower than currently typical for classrooms. Addresses guidelines for unducted HVAC systems, ducted single-zone systems, and central VAV or multizone systems. (EV)

Maximum Movement Workloads and High-Intensity Workload Demands by Position in NCAA Division I Collegiate Football.

PubMed

Sanders, Gabriel J; Roll, Brad; Peacock, Corey A; Kollock, Roger O

2018-05-02

Sanders, GJ, Roll, B, Peacock, CA, and Kollock, RO. Maximum movement workloads and high-intensity workload demands by position in NCAA division I collegiate football. J Strength Cond Res XX(X): 000-000, 2018-The purpose of the study was to quantify the average and maximum (i.e., peak) movement workloads, and the percent of those workloads performed at high intensity by NCAA division I football athletes during competitive games. Using global positioning system devices (Catapult Sports), low, moderate, and high and total multidirectional movement workloads were quantified by each position. Strategically achieving maximal workloads may improve both conditioning and rehabilitation protocols for athletes as they prepare for competition or return to play after an injury. A total of 40 football athletes were included in the analysis. For the data to be included, athletes were required to participate in ≥75% of the offensive or defensive snaps for any given game. There was a total of 286 data downloads from 13 different games for 8 different football positions. Data were calculated and compared by offensive and defensive position to establish the mean, SD, and maximum workloads during competitive games. The percent high-intensity workload profile was established to assess the total number and percent of high-intensity movement workloads by position. The profile was calculated by dividing a position's maximal high-intensity movement workload by the total (e.g., sum of maximal low, moderate, and high-intensity movements) movement workload. One-way analysis of variances revealed that there was a main effect of football position for total movement workloads and the percent of workloads performed at high intensities (p ≤ 0.025 for all). Maximal high-intensity workloads were 1.6-4.3 times greater than average high-intensity workloads, and the percent of total workloads performed at high intensities varied greatly by position. Strategically training for and using maximal movement workloads can help ensure that athletes are achieving workloads that are similar to the greatest demands of a competitive game.

Methods for utilizing maximum power from a solar array

NASA Technical Reports Server (NTRS)

Decker, D. K.

1972-01-01

A preliminary study of maximum power utilization methods was performed for an outer planet spacecraft using an ion thruster propulsion system and a solar array as the primary energy source. The problems which arise from operating the array at or near the maximum power point of its 1-V characteristic are discussed. Two closed loop system configurations which use extremum regulators to track the array's maximum power point are presented. Three open loop systems are presented that either: (1) measure the maximum power of each array section and compute the total array power, (2) utilize a reference array to predict the characteristics of the solar array, or (3) utilize impedance measurements to predict the maximum power utilization. The advantages and disadvantages of each system are discussed and recommendations for further development are made.

Levels of total mercury in predatory fish sold in Canada in 2005.

PubMed

Dabeka, R W; McKenzie, A D; Forsyth, D S

2011-06-01

Total mercury was analysed in 188 samples of predatory fish purchased at the retail level in Canada in 2005. The average concentrations (ng g(-1), range) were: sea bass 329 (38-1367), red snapper 148 (36-431), orange roughy 543 (279-974), fresh water trout 55 (20-430), grouper 360 (8-1060), black cod 284 (71-651), Arctic char 37 (28-54), king fish 440 (42-923), tilefish 601 (79-1164) and marlin 854 (125-2346). The Canadian standard for maximum total mercury allowed in the edible portions of fish sold at the retail level is 1000 ng g(-1) for shark, swordfish, marlin, orange roughy, escolar and both fresh and frozen tuna. The standard is 500 ng g(-1) for all other types of fish. In this study, despite the small number of samples of each species, the 1000 ng g(-1) maximum was exceeded in five samples of marlin (28%). The 500 ng g(-1) maximum was exceeded by six samples of sea bass (20%), four of tilefish (50%), five of grouper (24%), six of king fish (40%) and one of black cod (13%).

Influence of light-curing sources on polymerization reaction kinetics of a restorative system.

PubMed

D'Alpino, Paulo H P; Svizero, Nádia R; Pereira, José C; Rueggeberg, Frederick A; Carvalho, Ricardo M; Pashley, David H

2007-02-01

To determine the effect of using a variety of commercial light-curing units on polymerization of a dentin-bonding agent (Adper Single Bond) and of a resin composite (Filtek Z250). Infrared (IR) spectra were obtained kinetically at one scan/second at 2 cm(-1) resolution for a period of 5 minutes and were analyzed for: maximum conversion rate (%/s), time into exposure when maximum rate occurred (seconds), conversion at maximum rate (%), and total conversion (%) at 300 seconds by comparison of aliphatic-to-aromatic absorption IR peak ratios, before and after polymerization. Light units used were: QTH 540 mW/cm2 (XL3000); LED 750 mW/cm2 (Elipar FreeLight 2); PAC 2,130 mW/cm2 (ARC II). Exposure followed manufacturers' recommendations: dentin bonding agent for 10 seconds, RC for 20 seconds (QTH), and 10 seconds (LED and PAC). Polymerization kinetics was evaluated at the bottom surface (2.5 mm thick) for the resin composite and as a thin film for the dentin bonding agent on the diamond surface of an attenuated total reflectance accessory in the IR spectrometer. Values (n = 5) were compared using ANOVA and Tukey's pairwise post-hoc test: pre-set alpha 0.05. PAC produced the highest total conversion and conversion rate for the resin composite (P < 0.05). Total conversion was lower for dentin bonding adhesive using PAC than with LED or QTH (P < 0.05). LED provided the highest proportion of conversion at the maximum rate with respect to conversion at 300 seconds for both materials. QTH demonstrated the lowest maximum rate value that occurred at a longer time into exposure (P < 0.05). Polymerization kinetic parameters varied greatly between the restorative materials as well as among light-curing unit types when compared to values observed when using a QTH light as control.

40 CFR 423.15 - New source performance standards (NSPS).

Code of Federal Regulations, 2011 CFR

2011-07-01

... exceed (mg/l) TSS 100.0 30.0 Oil and grease 20.0 15.0 Copper, total 1.0 1.0 Iron, total 1.0 1.0 (e... pollutants from fly ash transport water. (h)(1) For any plant with a total rated electric generating capacity... or pollutant property NSPS effluent limitations Maximum concentration (mg/l) Total residual chlorine...

Probabilistic description of probable maximum precipitation

NASA Astrophysics Data System (ADS)

Ben Alaya, Mohamed Ali; Zwiers, Francis W.; Zhang, Xuebin

2017-04-01

Probable Maximum Precipitation (PMP) is the key parameter used to estimate probable Maximum Flood (PMF). PMP and PMF are important for dam safety and civil engineering purposes. Even if the current knowledge of storm mechanisms remains insufficient to properly evaluate limiting values of extreme precipitation, PMP estimation methods are still based on deterministic consideration, and give only single values. This study aims to provide a probabilistic description of the PMP based on the commonly used method, the so-called moisture maximization. To this end, a probabilistic bivariate extreme values model is proposed to address the limitations of traditional PMP estimates via moisture maximization namely: (i) the inability to evaluate uncertainty and to provide a range PMP values, (ii) the interpretation that a maximum of a data series as a physical upper limit (iii) and the assumption that a PMP event has maximum moisture availability. Results from simulation outputs of the Canadian Regional Climate Model CanRCM4 over North America reveal the high uncertainties inherent in PMP estimates and the non-validity of the assumption that PMP events have maximum moisture availability. This later assumption leads to overestimation of the PMP by an average of about 15% over North America, which may have serious implications for engineering design.

40 CFR 141.63 - Maximum contaminant levels (MCLs) for microbiological contaminants.

Code of Federal Regulations, 2011 CFR

2011-07-01

... repeat sample or E. coli-positive repeat sample, or any total coliform-positive repeat sample following a fecal coliform-positive or E. coli-positive routine sample constitutes a violation of the MCL for total...

40 CFR 141.63 - Maximum contaminant levels (MCLs) for microbiological contaminants.

Code of Federal Regulations, 2010 CFR

2010-07-01

... repeat sample or E. coli-positive repeat sample, or any total coliform-positive repeat sample following a fecal coliform-positive or E. coli-positive routine sample constitutes a violation of the MCL for total...

Improved relocatable over-the-horizon radar detection and tracking using the maximum likelihood adaptive neural system algorithm

NASA Astrophysics Data System (ADS)

Perlovsky, Leonid I.; Webb, Virgil H.; Bradley, Scott R.; Hansen, Christopher A.

1998-07-01

An advanced detection and tracking system is being developed for the U.S. Navy's Relocatable Over-the-Horizon Radar (ROTHR) to provide improved tracking performance against small aircraft typically used in drug-smuggling activities. The development is based on the Maximum Likelihood Adaptive Neural System (MLANS), a model-based neural network that combines advantages of neural network and model-based algorithmic approaches. The objective of the MLANS tracker development effort is to address user requirements for increased detection and tracking capability in clutter and improved track position, heading, and speed accuracy. The MLANS tracker is expected to outperform other approaches to detection and tracking for the following reasons. It incorporates adaptive internal models of target return signals, target tracks and maneuvers, and clutter signals, which leads to concurrent clutter suppression, detection, and tracking (track-before-detect). It is not combinatorial and thus does not require any thresholding or peak picking and can track in low signal-to-noise conditions. It incorporates superresolution spectrum estimation techniques exceeding the performance of conventional maximum likelihood and maximum entropy methods. The unique spectrum estimation method is based on the Einsteinian interpretation of the ROTHR received energy spectrum as a probability density of signal frequency. The MLANS neural architecture and learning mechanism are founded on spectrum models and maximization of the "Einsteinian" likelihood, allowing knowledge of the physical behavior of both targets and clutter to be injected into the tracker algorithms. The paper describes the addressed requirements and expected improvements, theoretical foundations, engineering methodology, and results of the development effort to date.

Reproductive biology of cuckoo ray Leucoraja naevus.

PubMed

Maia, C; Erzini, K; Serra-Pereira, B; Figueiredo, I

2012-09-01

The present study is the first to provide data on the reproductive biology of cuckoo ray Leucoraja naevus in Portuguese continental waters. No difference in size at maturity was detected between sexes, which was estimated as 56 cm total length. Spawning occurs all year round, but maximum activity was during winter months. Maximum fecundity is c. 63 eggs female(-1) year(-1). Encapsulated eggs are released in batches, nine in total with a mean number of seven extruded eggs in each batch. © 2012 The Authors. Journal of Fish Biology © 2012 The Fisheries Society of the British Isles.

RADIATION DOSE ASSESSMENT FOR THE BIOTA OF TERRESTRIAL ECOSYSTEMS IN THE SHORELINE ZONE OF THE CHERNOBYL NUCLEAR POWER PLANT COOLING POND

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farfan, E.; Jannik, T.

2011-10-01

Radiation exposure of the biota in the shoreline area of the Chernobyl Nuclear Power Plant Cooling Pond was assessed to evaluate radiological consequences from the decommissioning of the Cooling Pond. The article addresses studies of radioactive contamination of the terrestrial faunal complex and radionuclide concentration ratios in bodies of small birds, small mammals, amphibians, and reptiles living in the area. The data were used to calculate doses to biota using the ERICA Tool software. Doses from {sup 90}Sr and {sup 137}Cs were calculated using the default parameters of the ERICA Tool and were shown to be consistent with biota dosesmore » calculated from the field data. However, the ERICA dose calculations for plutonium isotopes were much higher (2-5 times for small mammals and 10-14 times for birds) than the doses calculated using the experimental data. Currently, the total doses for the terrestrial biota do not exceed maximum recommended levels. However, if the Cooling Pond is allowed to drawdown naturally and the contaminants of the bottom sediments are exposed and enter the biological cycle, the calculated doses to biota may exceed the maximum recommended values. The study is important in establishing the current exposure conditions such that a baseline exists from which changes can be documented following the lowering of the reservoir water. Additionally, the study provided useful radioecological data on biota concentration ratios for some species that are poorly represented in the literature.« less

Trends in the Diversity, Distribution and Life History Strategy of Arctic Hydrozoa (Cnidaria)

PubMed Central

Ronowicz, Marta; Kukliński, Piotr; Mapstone, Gillian M.

2015-01-01

This is the first attempt to compile a comprehensive and updated species list for Hydrozoa in the Arctic, encompassing both hydroid and medusa stages and including Siphonophorae. We address the hypothesis that the presence of a pelagic stage (holo- or meroplanktonic) was not necessary to successfully recolonize the Arctic by Hydrozoa after the Last Glacial Maximum. Presence-absence data of Hydrozoa in the Arctic were prepared on the basis of historical and present-day literature. The Arctic was divided into ecoregions. Species were grouped into distributional categories according to their worldwide occurrences. Each species was classified according to life history strategy. The similarity of species composition among regions was calculated with the Bray-Curtis index. Average and variation in taxonomic distinctness were used to measure diversity at the taxonomic level. A total of 268 species were recorded. Arctic-boreal species were the most common and dominated each studied region. Nineteen percent of species were restricted to the Arctic. There was a predominance of benthic species over holo- and meroplanktonic species. Arctic, Arctic-Boreal and Boreal species were mostly benthic, while widely distributed species more frequently possessed a pelagic stage. Our results support hypothesis that the presence of a pelagic stage (holo- or meroplanktonic) was not necessary to successfully recolonize the Arctic. The predominance of benthic Hydrozoa suggests that the Arctic could have been colonised after the Last Glacial Maximum by hydroids rafting on floating substrata or recolonising from glacial refugia. PMID:25793294

Trends in the diversity, distribution and life history strategy of Arctic Hydrozoa (Cnidaria).

PubMed

Ronowicz, Marta; Kukliński, Piotr; Mapstone, Gillian M

2015-01-01

This is the first attempt to compile a comprehensive and updated species list for Hydrozoa in the Arctic, encompassing both hydroid and medusa stages and including Siphonophorae. We address the hypothesis that the presence of a pelagic stage (holo- or meroplanktonic) was not necessary to successfully recolonize the Arctic by Hydrozoa after the Last Glacial Maximum. Presence-absence data of Hydrozoa in the Arctic were prepared on the basis of historical and present-day literature. The Arctic was divided into ecoregions. Species were grouped into distributional categories according to their worldwide occurrences. Each species was classified according to life history strategy. The similarity of species composition among regions was calculated with the Bray-Curtis index. Average and variation in taxonomic distinctness were used to measure diversity at the taxonomic level. A total of 268 species were recorded. Arctic-boreal species were the most common and dominated each studied region. Nineteen percent of species were restricted to the Arctic. There was a predominance of benthic species over holo- and meroplanktonic species. Arctic, Arctic-Boreal and Boreal species were mostly benthic, while widely distributed species more frequently possessed a pelagic stage. Our results support hypothesis that the presence of a pelagic stage (holo- or meroplanktonic) was not necessary to successfully recolonize the Arctic. The predominance of benthic Hydrozoa suggests that the Arctic could have been colonised after the Last Glacial Maximum by hydroids rafting on floating substrata or recolonising from glacial refugia.

Effects of body position on exercise capacity and pulmonary vascular pressure-flow relationships.

PubMed

Forton, Kevin; Motoji, Yoshiki; Deboeck, Gael; Faoro, Vitalie; Naeije, Robert

2016-11-01

There has been revival of interest in exercise testing of the pulmonary circulation for the diagnosis of pulmonary vascular disease, but there still is uncertainty about body position and the most relevant measurements. Doppler echocardiography pulmonary hemodynamic measurements were performed at progressively increased workloads in 26 healthy adult volunteers in supine, semirecumbent, and upright positions that were randomly assigned at 24-h intervals. Mean pulmonary artery pressure (mPAP) was estimated from the maximum tricuspid regurgitation jet velocity. Cardiac output was calculated from the left ventricular outflow velocity-time integral. Pulmonary vascular distensibility α-index, the percent change of vessel diameter per millimeter mercury of mPAP, was calculated from multipoint mPAP-cardiac output plots. Body position did not affect maximum oxygen uptake (Vo 2max ), maximum respiratory exchange ratio, ventilatory equivalent for carbon dioxide, or slope of mPAP-cardiac output relationships, which was on average of 1.5 ± 0.4 mmHg·l -1 ·min -1 Maximum mPAP, cardiac output, and total pulmonary vascular resistance were, respectively, 34 ± 4 mmHg, 18 ± 3 l/min, and 1.9 ± 0.3 Wood units. However, the semirecumbent position was associated with a 10% decrease in maximum workload. Furthermore, cardiac output-workload or cardiac output-Vo 2 relationships were nonlinear and variable. These results suggest that body position does not affect maximum exercise testing of the pulmonary circulation when results are expressed as mPAP-cardiac output or maximum total pulmonary vascular resistance. Maximum workload is decreased in semirecumbent compared with upright exercise. Workload or Vo 2 cannot reliably be used as surrogates for cardiac output. Copyright © 2016 the American Physiological Society.

Spatial heterogeneity distribution of soil total nitrogen and total phosphorus in the Yaoxiang watershed in a hilly area of northern China based on geographic information system and geostatistics.

PubMed

Liu, Yu; Gao, Peng; Zhang, Liyong; Niu, Xiang; Wang, Bing

2016-10-01

Soil total nitrogen (STN) and total phosphorus (STP) are important indicators of soil nutrients and the important indexes of soil fertility and soil quality evaluation. Using geographic information system (GIS) and geostatistics, the spatial heterogeneity distribution of STN and STP in the Yaoxiang watershed in a hilly area of northern China was studied. The results showed that: (1) The STN and STP contents showed a declining trend with the increase in soil depth; the variation coefficients ( C v ) of STN and STP in the 0- to 10-cm soil layer (42.25% and 14.77%, respectively) were higher than in the 10- to 30-cm soil layer (28.77% and 11.60%, respectively). Moreover, the C v of STN was higher than that of STP. (2) The maximum C 0 /( C 0  +  C 1 ) of STN and STP in the soil layers was less than 25%, this indicated that a strong spatial distribution autocorrelation existed for STN and STP; and the STP showed higher intensity and more stable variation than the STN. (3) From the correlation analysis, we concluded that the topographic indexes such as elevation and slope direction all influenced the spatial distribution of STN and STP (correlation coefficients were 0.688 and 0.518, respectively). (4) The overall distribution of STN and STP in the Yaoxiang watershed decreased from the northwest to the southeast. This variation trend was similar to the watershed DEM trend and was significantly influenced by vegetation and topographic factors. These results revealed the spatial heterogeneity distribution of STN and STP, and addressed the influences of forest vegetation coverage, elevation, and other topographic factors on the spatial distribution of STN and STP at the watershed scale.

The total satellite population of the Milky Way

NASA Astrophysics Data System (ADS)

Newton, Oliver; Cautun, Marius; Jenkins, Adrian; Frenk, Carlos S.; Helly, John C.

2018-05-01

The total number and luminosity function of the population of dwarf galaxies of the Milky Way (MW) provide important constraints on the nature of the dark matter and on the astrophysics of galaxy formation at low masses. However, only a partial census of this population exists because of the flux limits and restricted sky coverage of existing Galactic surveys. We combine the sample of satellites recently discovered by the Dark Energy Survey (DES) survey with the satellites found in Sloan Digital Sky Survey (SDSS) Data Release 9 (together these surveys cover nearly half the sky) to estimate the total luminosity function of satellites down to MV = 0. We apply a new Bayesian inference method in which we assume that the radial distribution of satellites independently of absolute magnitude follows that of subhaloes selected according to their peak maximum circular velocity. We find that there should be at least 124^{+40}_{-27}(68% CL, statistical error) satellites brighter than MV = 0 within 300kpc of the Sun. As a result of our use of new data and better simulations, and a more robust statistical method, we infer a much smaller population of satellites than reported in previous studies using earlier SDSS data only; we also address an underestimation of the uncertainties in earlier work by accounting for stochastic effects. We find that the inferred number of faint satellites depends only weakly on the assumed mass of the MW halo and we provide scaling relations to extend our results to different assumed halo masses and outer radii. We predict that half of our estimated total satellite population of the MW should be detected by the Large Synoptic Survey Telescope (LSST). The code implementing our estimation method is available online.†

Effect of zinc oxide (ZnO) nanoparticles on physiology and steviol glycosides production in micropropagated shoots of Stevia rebaudiana Bertoni.

PubMed

Javed, Rabia; Usman, Muhammad; Yücesan, Buhara; Zia, Muhammad; Gürel, Ekrem

2017-01-01

This study aims to address the effects of different concentrations (0, 0.1, 1.0, 10, 100 or 1000 mg L -1 ) of engineered zinc oxide (ZnO) nanoparticles (34 nm in size) on growth parameters, steviol glycosides (rebaudioside A and stevioside) production and antioxidant activities in the tissue culture grown shoots of Stevia rebaudiana Bertoni. The highest percentage of shoot formation (89.6%) at 1 mg L -1 of ZnO nanoparticles concentration suggests a positive influence of ZnO nanoparticles on S. rebaudiana growth as compared to other treatments with or without ZnO nanoparticles. Additionally, HPLC results illustrate a significant enhancement of steviol glycosides (almost doubled as compared to the control) in micropropagated shoots grown under an oxidative stress of 1 mg L -1 of ZnO nanoparticles. This finding is further affirmed by an increased 2,2-diphenyl-1-picryl hydrazyl (DPPH) scavenging activity, total anti-oxidant capacity, total reducing power, total flavonoid content and total phenolic content, with an ascending oxidative pressure and generation of reactive oxygen species (ROS). However, the antioxidant activities, formation of secondary metabolites and the physiological parameters showed a sudden decline after crossing a threshold of 1 mg L -1 concentration of ZnO nanoparticles and falls to a minimum at 1000 mg L -1 , elucidating maximum phytotoxic effect of ZnO nanoparticles at this concentration. This is the first study evaluating both the favorable and adverse effects of ZnO nanoparticles employed to a highly valuable medicinal plant, S. rebaudiana. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Multiple addresses: 201 S. LSD and 401 N. LSD, Lindsay Light Radiological Survey

EPA Pesticide Factsheets

The field gamma measurements beneath the removed pavement and within the excavated areas of theproject did not exceed the instrument threshold previously stated, and ranged from a minimum of 700cpm to a maximum of 4,500 cpm shielded.

Multiple addresses: 500-59 E. Illinois St. and 500-91 E. Grand Ave., Lindsay Light Radiological Survey

EPA Pesticide Factsheets

The field gamma measurements within the excavation during the excavation process did not exceed theinstrument threshold previously stated, and ranged from a minimum of 1,200 cpm to a maximum of 3,100cpm shielded.

Towards further understanding on the antioxidative activities of Prunus persica fruit: A comparative study with four different fractions

NASA Astrophysics Data System (ADS)

Dhingra, Naveen; Sharma, Rajesh; Kar, Anand

2014-11-01

In the present study we have evaluated the antioxidant activities of different fractions (hexane, ethyl acetate, n-butanol and aqueous fractions) of Prunus persica fruit. For extraction simple warring blender method was employed and total phenolic and flavonoid contents were correlated with different antioxidant activities (total antioxidant, 2,2-diphenyl-1-picrylhydrazyl (DPPH), H2O2 scavenging, superoxide radical scavenging, iron chelating and their reducing power properties). Different in vitro antioxidant studies showed that ethyl acetate and n-butanol fractions had the maximum activities that were well correlated with total phenolic and flavonoid contents. Maximum yield (25.14 ± 2.2%) was obtained in its aqueous fraction. Both ethyl acetate and n-butanol fractions showed significant inhibitory effects on different antioxidant activities. A significantly high correlation coefficient existed between total antioxidant activities and with total phenolic as well as total flavonoid contents. It appears that ethyl acetate and n-butanol fractions of P. persica may serve as new potential sources of natural antioxidants and could be of therapeutic use in treating several diseases.

Amelioration and degradation of pressmud and bagasse wastes using vermitechnology.

PubMed

Bhat, Sartaj Ahmad; Singh, Jaswinder; Vig, Adarsh Pal

2017-11-01

This study evaluated the amelioration of pressmud (PM) and bagasse (BG) wastes by the vermiremediation process. The wastes were spiked with cattle dung (CD) in different concentrations to find out the best proportion supporting maximum earthworm growth and nutrients availability. The highest growth rate was observed in PMBG 50 (282.2mg/d/worm) feed mixture. Response surface design of earthworm growth parameters enumerated best concentration of wastes in CD with maximum value of 21.81% for earthworm number, 30.86% for earthworm weight, 27.09% for cocoons, 29.71% for hatchlings and 34.0% for hatchlings weight. Vermicomposting enhanced nutrient parameters like pH (6-8%), total kjeldahl nitrogen (19-48%), total phosphorus (9-67%), total calcium (13-111%), while decrease in total organic carbon (14-32%), electrical conductivity (21-30%), C:N ratio (36-51%), total potassium (9-19%) and total sodium (3-21%). Heavy metals in the final products were found to be under safe limits. SEM micrographs were more fragmented which indicated maturity and stability. Copyright © 2017 Elsevier Ltd. All rights reserved.

40 CFR 141.51 - Maximum contaminant level goals for inorganic contaminants.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Maximum Contaminant Level...: Contaminant MCLG (mg/l) Antimony 0.006 Arsenic zero 1 Asbestos 7 Million fibers/liter (longer than 10 µm... Lead zero Mercury 0.002 Nitrate 10 (as Nitrogen). Nitrite 1 (as Nitrogen). Total Nitrate+Nitrite 10 (as...

40 CFR 141.51 - Maximum contaminant level goals for inorganic contaminants.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Maximum Contaminant Level...: Contaminant MCLG (mg/l) Antimony 0.006 Arsenic zero 1 Asbestos 7 Million fibers/liter (longer than 10 µm... Lead zero Mercury 0.002 Nitrate 10 (as Nitrogen). Nitrite 1 (as Nitrogen). Total Nitrate+Nitrite 10 (as...

40 CFR 141.51 - Maximum contaminant level goals for inorganic contaminants.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Maximum Contaminant Level...: Contaminant MCLG (mg/l) Antimony 0.006 Arsenic zero 1 Asbestos 7 Million fibers/liter (longer than 10 µm... Lead zero Mercury 0.002 Nitrate 10 (as Nitrogen). Nitrite 1 (as Nitrogen). Total Nitrate+Nitrite 10 (as...

24 CFR 883.604 - Maximum annual commitment and project account.

Code of Federal Regulations, 2011 CFR

2011-04-01

... annual commitment. The maximum annual contribution that may be contracted for in the ACC is the total of... annual commitment exceeds the amount actually paid out under the ACC each year. Payments will be made... specifically approved by the Secretary. (2) Whenever a HUD-approved estimate of required payments under the ACC...

24 CFR 883.604 - Maximum annual commitment and project account.

Code of Federal Regulations, 2010 CFR

2010-04-01

... annual commitment. The maximum annual contribution that may be contracted for in the ACC is the total of... annual commitment exceeds the amount actually paid out under the ACC each year. Payments will be made... specifically approved by the Secretary. (2) Whenever a HUD-approved estimate of required payments under the ACC...

Implied Maximum Dose Analysis of Standard Values of 25 Pesticides Based on Major Human Exposure Pathways

PubMed Central

Li, Zijian; Jennings, Aaron A.

2017-01-01

Worldwide jurisdictions are making efforts to regulate pesticide standard values in residential soil, drinking water, air, and agricultural commodity to lower the risk of pesticide impacts on human health. Because human may exposure to pesticides from many ways, such as ingestion, inhalation, and dermal contact, it is important to examine pesticide standards by considering all major exposure pathways. Analysis of implied maximum dose limits for commonly historical and current used pesticides was adopted in this study to examine whether worldwide pesticide standard values are enough to prevent human health impact or not. Studies show that only U.S. has regulated pesticides standard in the air. Only 4% of the total number of implied maximum dose limits is based on three major exposures. For Chlorpyrifos, at least 77.5% of the total implied maximum dose limits are above the acceptable daily intake. It also shows that most jurisdictions haven't provided pesticide standards in all major exposures yet, and some of the standards are not good enough to protect human health. PMID:29546224

Analysis of dispatching rules in a stochastic dynamic job shop manufacturing system with sequence-dependent setup times

NASA Astrophysics Data System (ADS)

Sharma, Pankaj; Jain, Ajai

2014-12-01

Stochastic dynamic job shop scheduling problem with consideration of sequence-dependent setup times are among the most difficult classes of scheduling problems. This paper assesses the performance of nine dispatching rules in such shop from makespan, mean flow time, maximum flow time, mean tardiness, maximum tardiness, number of tardy jobs, total setups and mean setup time performance measures viewpoint. A discrete event simulation model of a stochastic dynamic job shop manufacturing system is developed for investigation purpose. Nine dispatching rules identified from literature are incorporated in the simulation model. The simulation experiments are conducted under due date tightness factor of 3, shop utilization percentage of 90% and setup times less than processing times. Results indicate that shortest setup time (SIMSET) rule provides the best performance for mean flow time and number of tardy jobs measures. The job with similar setup and modified earliest due date (JMEDD) rule provides the best performance for makespan, maximum flow time, mean tardiness, maximum tardiness, total setups and mean setup time measures.

An improved maximum power point tracking method for a photovoltaic system

NASA Astrophysics Data System (ADS)

Ouoba, David; Fakkar, Abderrahim; El Kouari, Youssef; Dkhichi, Fayrouz; Oukarfi, Benyounes

2016-06-01

In this paper, an improved auto-scaling variable step-size Maximum Power Point Tracking (MPPT) method for photovoltaic (PV) system was proposed. To achieve simultaneously a fast dynamic response and stable steady-state power, a first improvement was made on the step-size scaling function of the duty cycle that controls the converter. An algorithm was secondly proposed to address wrong decision that may be made at an abrupt change of the irradiation. The proposed auto-scaling variable step-size approach was compared to some various other approaches from the literature such as: classical fixed step-size, variable step-size and a recent auto-scaling variable step-size maximum power point tracking approaches. The simulation results obtained by MATLAB/SIMULINK were given and discussed for validation.

Maximum Power Game as a Physical and Social Extension of Classical Games

NASA Astrophysics Data System (ADS)

Kim, Pilwon

2017-03-01

We consider an electric circuit in which the players participate as resistors and adjust their resistance in pursuit of individual maximum power. The maximum power game(MPG) becomes very complicated in a circuit which is indecomposable into serial/parallel components, yielding a nontrivial power distribution at equilibrium. Depending on the circuit topology, MPG covers a wide range of phenomena: from a social dilemma in which the whole group loses to a well-coordinated situation in which the individual pursuit of power promotes the collective outcomes. We also investigate a situation where each player in the circuit has an intrinsic heat waste. Interestingly, it is this individual inefficiency which can keep them from the collective failure in power generation. When coping with an efficient opponent with small intrinsic resistance, a rather inefficient player gets more power than efficient one. A circuit with multiple voltage inputs forms the network-based maximum power game. One of our major interests is to figure out, in what kind of the networks the pursuit for private power leads to greater total power. It turns out that the circuits with the scale-free structure is one of the good candidates which generates as much power as close to the possible maximum total.

Seasonal cycle and secular trend of the total and tropospheric column abundance of ethane above the Jungfraujoch

NASA Technical Reports Server (NTRS)

Ehhalt, D. H.; Schmidt, U.; Zander, R.; Demoulin, P.; Rinsland, C. P.

1991-01-01

The secular trend and the seasonal cycle of the total and the tropospheric column abundances of C2H6 over the Jungfraujoch Station (Switzerland) were deduced from infrared solar spectra recorded in 1951 and from 1984 to 1988. Results show a definite seasonal variation in the total vertical column abundance of C2H6, with a maximum of (1.43 + or - 0.03) x 10 to the 16th molecules/sq cm during March and April and a minimum in the fall; the ratio between the maximum and the minimum column abundances was found to be 1.62 + or - 0.11. The secular trend in the tropospheric burden above the Jungfraujoch was found to be (0.85 + or - 0.3) percent/yr.

Unravelling the limits to tree height: a major role for water and nutrient trade-offs.

PubMed

Cramer, Michael D

2012-05-01

Competition for light has driven forest trees to grow exceedingly tall, but the lack of a single universal limit to tree height indicates multiple interacting environmental limitations. Because soil nutrient availability is determined by both nutrient concentrations and soil water, water and nutrient availabilities may interact in determining realised nutrient availability and consequently tree height. In SW Australia, which is characterised by nutrient impoverished soils that support some of the world's tallest forests, total [P] and water availability were independently correlated with tree height (r = 0.42 and 0.39, respectively). However, interactions between water availability and each of total [P], pH and [Mg] contributed to a multiple linear regression model of tree height (r = 0.72). A boosted regression tree model showed that maximum tree height was correlated with water availability (24%), followed by soil properties including total P (11%), Mg (10%) and total N (9%), amongst others, and that there was an interaction between water availability and total [P] in determining maximum tree height. These interactions indicated a trade-off between water and P availability in determining maximum tree height in SW Australia. This is enabled by a species assemblage capable of growing tall and surviving (some) disturbances. The mechanism for this trade-off is suggested to be through water enabling mass-flow and diffusive mobility of P, particularly of relatively mobile organic P, although water interactions with microbial activity could also play a role.

Time course of epiphyseal growth plate fusion in rat tibiae

NASA Technical Reports Server (NTRS)

Martin, E. A.; Ritman, E. L.; Turner, R. T.

2003-01-01

Although the rat is the most common animal model used in studying osteoporosis, it is often used inappropriately. Osteoporosis is a disease that most commonly occurs in humans long after growth plate fusion with the associated cessation of longitudinal bone growth, but there has been a question as to when or to what extent the rat growth plate fuses. To investigate this question, we used microcomputed X-ray tomography, at voxel resolutions ranging from (5.7 micro m)(3) to (11 micro m)(3), to image the proximal epiphyseal growth plates of both male (n = 19) and female (n = 15) rat tibiae, ranging in age from 2 to 25 months. The three-dimensional images were used to evaluate fusion of the epiphyseal growth plate by quantitating the amount of cancellous bone that has bridged across the growth plate. The results suggest that the time course of fusion of the epiphyseal growth plate follows a sigmoidal pattern, with 10% of the maximum number of bridges having formed by 3.9 months in the male tibiae and 5.8 months in the female tibiae, 50% of the maximum number of bridges having formed by 5.6 months in the male tibiae and 5.9 months in the female tibiae, and 90% of the total maximum of bridges have formed by 7.4 months for the males and 6.5 months for the females. The total volume of bridges per tibia at the age at which the maximum number of bridges per tibia has first formed is 0.99 mm(3)/tibia for the males and 0.40 mm(3)/tibia for the females. After the maximum number of bridges (-290 for females, -360 for males) have formed the total volume of bridges per tibia continues to increase for an additional 7.0 months in the males and 17.0 months for the females until they reach maximum values (-1.5 mm(3)/tibia for the males and -2.2 mm(3)/tibia for the females).

On the computational aspects of comminution in discrete element method

NASA Astrophysics Data System (ADS)

Chaudry, Mohsin Ali; Wriggers, Peter

2018-04-01

In this paper, computational aspects of crushing/comminution of granular materials are addressed. For crushing, maximum tensile stress-based criterion is used. Crushing model in discrete element method (DEM) is prone to problems of mass conservation and reduction in critical time step. The first problem is addressed by using an iterative scheme which, depending on geometric voids, recovers mass of a particle. In addition, a global-local framework for DEM problem is proposed which tends to alleviate the local unstable motion of particles and increases the computational efficiency.

The Unmanned Combat Aircraft (UCAV): The Point of View of an Aircraft Manufacturer (Les Avions de Combat Non Habites (UCAV) Le point de vue d’un avionneur)

DTIC Science & Technology

2000-04-01

Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704...92552 St Cloud Cedex FRANCE 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES 10. SPONSORING/MONITORING AGENCY REPORT NUMBER EOARD PSC 802 Box 14...distribution is unlimited. A ABSTRACT (Maximum 200 words) There is an increasing interest to develop an unmanned plane. It is possible to consider innovator

Electricity generation from food wastes and microbial community structure in microbial fuel cells.

PubMed

Jia, Jianna; Tang, Yu; Liu, Bingfeng; Wu, Di; Ren, Nanqi; Xing, Defeng

2013-09-01

Microbial fuel cell (MFC) was studied as an alternate and a novel way to dispose food wastes (FWs) in a waste-to-energy form. Different organic loading rate obviously affected the performance of MFCs fed with FWs. The maximum power density of ~18 W/m(3) (~556 mW/m(2)) was obtained at COD of 3200±400 mg/L and the maximum coulombic efficiency (CE) was ~27.0% at COD of 4900±350 mg/L. The maximum removals of COD, total carbohydrate (TC) and total nitrogen (TN) were ~86.4%, ~95.9% and ~16.1%, respectively. Microbial community analysis using 454 pyrosequencing of 16S rRNA gene demonstrated the combination of the dominant genera of the exoelectrogenic Geobacter and fermentative Bacteroides effectively drove highly efficient and reliable MFC systems with functions of organic matters degradation and electricity generation. Copyright © 2013 Elsevier Ltd. All rights reserved.

43 CFR 3809.201 - What should these agreements address?

Code of Federal Regulations, 2011 CFR

2011-10-01

... LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINING CLAIMS UNDER THE GENERAL...? (a) The agreements should provide for maximum possible coordination with the State to avoid... should cover any or all sections of this subpart and should consider, at a minimum, common approaches to...

Social Networks and the Poor: Toward Effective Policy and Practice.

ERIC Educational Resources Information Center

Auslander, Gail K.; Litwin, Howard

1988-01-01

Study of adults (N=3,025) revealed significantly fewer network resources among the poor than among higher income groups. Asserts social workers must avoid addressing the problems of the poor solely through informal networks and target network interventions carefully to achieve maximum effectiveness. (Author)

Differential distribution of amino acids in plants.

PubMed

Kumar, Vinod; Sharma, Anket; Kaur, Ravdeep; Thukral, Ashwani Kumar; Bhardwaj, Renu; Ahmad, Parvaiz

2017-05-01

Plants are a rich source of amino acids and their individual abundance in plants is of great significance especially in terms of food. Therefore, it is of utmost necessity to create a database of the relative amino acid contents in plants as reported in literature. Since in most of the cases complete analysis of profiles of amino acids in plants was not reported, the units used and the methods applied and the plant parts used were different, amino acid contents were converted into relative units with respect to lysine for statistical analysis. The most abundant amino acids in plants are glutamic acid and aspartic acid. Pearson's correlation analysis among different amino acids showed that there were no negative correlations between the amino acids. Cluster analysis (CA) applied to relative amino acid contents of different families. Alismataceae, Cyperaceae, Capparaceae and Cactaceae families had close proximity with each other on the basis of their relative amino acid contents. First three components of principal component analysis (PCA) explained 79.5% of the total variance. Factor analysis (FA) explained four main underlying factors for amino acid analysis. Factor-1 accounted for 29.4% of the total variance and had maximum loadings on glycine, isoleucine, leucine, threonine and valine. Factor-2 explained 25.8% of the total variance and had maximum loadings on alanine, aspartic acid, serine and tyrosine. 14.2% of the total variance was explained by factor-3 and had maximum loadings on arginine and histidine. Factor-4 accounted 8.3% of the total variance and had maximum loading on the proline amino acid. The relative content of different amino acids presented in this paper is alanine (1.4), arginine (1.8), asparagine (0.7), aspartic acid (2.4), cysteine (0.5), glutamic acid (2.8), glutamine (0.6), glycine (1.0), histidine (0.5), isoleucine (0.9), leucine (1.7), lysine (1.0), methionine (0.4), phenylalanine (0.9), proline (1.1), serine (1.0), threonine (1.0), tryptophan (0.3), tyrosine (0.7) and valine (1.2).

Participant-Predicted, Observed, and Calculated Peak Blood Alcohol Levels: A Gender-Specific Analysis

PubMed Central

Van Tassel, W.E.; Manser, M.P.

2000-01-01

In recent years there has been a push by federal and state governments to lower the maximum blood alcohol level at which drivers are considered intoxicated. Many states have lowered the maximum blood alcohol level to .08%. This paper offers insight into drinkers’ ability to predict their level of impairment prior to consuming a given amount of alcohol. It addresses the problem of drinkers not knowing how many drinks they can consume before becoming legally impaired. Results indicate males and females differ in their ability to predict impairment levels. PMID:11558094

Report: Nationwide Identification of Hardrock Mining Sites

EPA Pesticide Factsheets

Report #2004-P-00005, March 31, 2004. We identified 156 hardrock mining sites nationwide that have the potential to cost between $7 billion and $24 billion total to clean up (at a maximum total cost to EPA of approximately $15 billion).

Panel Discussions on Total Solar Irradiance Variations and the Maunder Minimum

NASA Technical Reports Server (NTRS)

Pap, J. M.; White, O. R.

1993-01-01

For more than a decade, total solar irradiance has been monitored from several satellites, namely and Nimbus-7, Solar Maximum Mission (SMM), the NASA ERBS, NOAA9 and NOAA10,EURECA, and the Upper Atmospheric Research Satellite (SARS).

78 FR 11652 - Agency Information Collection Activities; Proposed Collection; Comment Request; Evaluation of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-19

... responses per Total annual Average burden Total hours respondents respondent responses per response Pretest... and maintenance costs associated with this collection of information. ERG will conduct a pretest of... complete the pretest, for a total of a maximum of 7.5 hours. We estimate that up to 135 [[Page 11654...

An iterative procedure for obtaining maximum-likelihood estimates of the parameters for a mixture of normal distributions

NASA Technical Reports Server (NTRS)

Peters, B. C., Jr.; Walker, H. F.

1978-01-01

This paper addresses the problem of obtaining numerically maximum-likelihood estimates of the parameters for a mixture of normal distributions. In recent literature, a certain successive-approximations procedure, based on the likelihood equations, was shown empirically to be effective in numerically approximating such maximum-likelihood estimates; however, the reliability of this procedure was not established theoretically. Here, we introduce a general iterative procedure, of the generalized steepest-ascent (deflected-gradient) type, which is just the procedure known in the literature when the step-size is taken to be 1. We show that, with probability 1 as the sample size grows large, this procedure converges locally to the strongly consistent maximum-likelihood estimate whenever the step-size lies between 0 and 2. We also show that the step-size which yields optimal local convergence rates for large samples is determined in a sense by the 'separation' of the component normal densities and is bounded below by a number between 1 and 2.

An iterative procedure for obtaining maximum-likelihood estimates of the parameters for a mixture of normal distributions, 2

NASA Technical Reports Server (NTRS)

Peters, B. C., Jr.; Walker, H. F.

1976-01-01

The problem of obtaining numerically maximum likelihood estimates of the parameters for a mixture of normal distributions is addressed. In recent literature, a certain successive approximations procedure, based on the likelihood equations, is shown empirically to be effective in numerically approximating such maximum-likelihood estimates; however, the reliability of this procedure was not established theoretically. Here, a general iterative procedure is introduced, of the generalized steepest-ascent (deflected-gradient) type, which is just the procedure known in the literature when the step-size is taken to be 1. With probability 1 as the sample size grows large, it is shown that this procedure converges locally to the strongly consistent maximum-likelihood estimate whenever the step-size lies between 0 and 2. The step-size which yields optimal local convergence rates for large samples is determined in a sense by the separation of the component normal densities and is bounded below by a number between 1 and 2.

A pairwise maximum entropy model accurately describes resting-state human brain networks

PubMed Central

Watanabe, Takamitsu; Hirose, Satoshi; Wada, Hiroyuki; Imai, Yoshio; Machida, Toru; Shirouzu, Ichiro; Konishi, Seiki; Miyashita, Yasushi; Masuda, Naoki

2013-01-01

The resting-state human brain networks underlie fundamental cognitive functions and consist of complex interactions among brain regions. However, the level of complexity of the resting-state networks has not been quantified, which has prevented comprehensive descriptions of the brain activity as an integrative system. Here, we address this issue by demonstrating that a pairwise maximum entropy model, which takes into account region-specific activity rates and pairwise interactions, can be robustly and accurately fitted to resting-state human brain activities obtained by functional magnetic resonance imaging. Furthermore, to validate the approximation of the resting-state networks by the pairwise maximum entropy model, we show that the functional interactions estimated by the pairwise maximum entropy model reflect anatomical connexions more accurately than the conventional functional connectivity method. These findings indicate that a relatively simple statistical model not only captures the structure of the resting-state networks but also provides a possible method to derive physiological information about various large-scale brain networks. PMID:23340410

Maximum magnitude earthquakes induced by fluid injection

USGS Publications Warehouse

McGarr, Arthur F.

2014-01-01

Analysis of numerous case histories of earthquake sequences induced by fluid injection at depth reveals that the maximum magnitude appears to be limited according to the total volume of fluid injected. Similarly, the maximum seismic moment seems to have an upper bound proportional to the total volume of injected fluid. Activities involving fluid injection include (1) hydraulic fracturing of shale formations or coal seams to extract gas and oil, (2) disposal of wastewater from these gas and oil activities by injection into deep aquifers, and (3) the development of enhanced geothermal systems by injecting water into hot, low-permeability rock. Of these three operations, wastewater disposal is observed to be associated with the largest earthquakes, with maximum magnitudes sometimes exceeding 5. To estimate the maximum earthquake that could be induced by a given fluid injection project, the rock mass is assumed to be fully saturated, brittle, to respond to injection with a sequence of earthquakes localized to the region weakened by the pore pressure increase of the injection operation and to have a Gutenberg-Richter magnitude distribution with a b value of 1. If these assumptions correctly describe the circumstances of the largest earthquake, then the maximum seismic moment is limited to the volume of injected liquid times the modulus of rigidity. Observations from the available case histories of earthquakes induced by fluid injection are consistent with this bound on seismic moment. In view of the uncertainties in this analysis, however, this should not be regarded as an absolute physical limit.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herberger, Sarah M.; Boring, Ronald L.

Abstract Objectives: This paper discusses the differences between classical human reliability analysis (HRA) dependence and the full spectrum of probabilistic dependence. Positive influence suggests an error increases the likelihood of subsequent errors or success increases the likelihood of subsequent success. Currently the typical method for dependence in HRA implements the Technique for Human Error Rate Prediction (THERP) positive dependence equations. This assumes that the dependence between two human failure events varies at discrete levels between zero and complete dependence (as defined by THERP). Dependence in THERP does not consistently span dependence values between 0 and 1. In contrast, probabilistic dependencemore » employs Bayes Law, and addresses a continuous range of dependence. Methods: Using the laws of probability, complete dependence and maximum positive dependence do not always agree. Maximum dependence is when two events overlap to their fullest amount. Maximum negative dependence is the smallest amount that two events can overlap. When the minimum probability of two events overlapping is less than independence, negative dependence occurs. For example, negative dependence is when an operator fails to actuate Pump A, thereby increasing his or her chance of actuating Pump B. The initial error actually increases the chance of subsequent success. Results: Comparing THERP and probability theory yields different results in certain scenarios; with the latter addressing negative dependence. Given that most human failure events are rare, the minimum overlap is typically 0. And when the second event is smaller than the first event the max dependence is less than 1, as defined by Bayes Law. As such alternative dependence equations are provided along with a look-up table defining the maximum and maximum negative dependence given the probability of two events. Conclusions: THERP dependence has been used ubiquitously for decades, and has provided approximations of the dependencies between two events. Since its inception, computational abilities have increased exponentially, and alternative approaches that follow the laws of probability dependence need to be implemented. These new approaches need to consider negative dependence and identify when THERP output is not appropriate.« less

78 FR 20109 - Agency Forms Undergoing Paperwork Reduction Act Review

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-03

...Meeting (i.e., webinar) training session conducted by CDC staff. We estimate the burden of this training to be a maximum of 2 hours. Respondents will only have to take this training one time. Assuming a maximum number of outbreaks of 1,400, the estimated burden for this training is 2,800 hours. The total...

Colic Caused by Panicum maximum Toxicosis in Equidae in Northern Brazil

USDA-ARS?s Scientific Manuscript database

In the Amazon region of northern Brazil, Panicum maximum cultivars Mombaça, Tanzânia, and Massai cause severe colic and death in horses and mules. The disease occurs in the rainy season, when sprouting pastures are grazed by equidae. In the 8 separate disease outbreaks studied, a total of 52 out of ...

40 CFR Table 7 to Subpart U of... - Operating Parameters for Which Monitoring Levels Are Required To Be Established for Continuous...

Code of Federal Regulations, 2012 CFR

2012-07-01

.... Condenser Exit temperature Maximum temperature. Carbon adsorber Total regeneration steam flow or nitrogen flow, or pressure (gauge or absolute) a during carbon bed regeneration cycle; and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s)) Maximum flow or...

40 CFR Table 7 to Subpart Ppp of... - Process Vents From Continuous Unit Operations-Monitoring, Recordkeeping, and Reporting Requirements

Code of Federal Regulations, 2010 CFR

2010-07-01

... absorbent is used. Condenser Exit temperature Maximum temperature. Carbon adsorber Total regeneration stream mass or volumetric flow during carbon bed regeneration cycle; and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s)) Maximum mass or volumetric flow; and...

40 CFR Table 7 to Subpart U of... - Operating Parameters for Which Monitoring Levels Are Required To Be Established for Continuous...

Code of Federal Regulations, 2014 CFR

2014-07-01

.... Condenser Exit temperature Maximum temperature. Carbon adsorber Total regeneration steam flow or nitrogen flow, or pressure (gauge or absolute) a during carbon bed regeneration cycle; and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s)) Maximum flow or...

40 CFR Table 7 to Subpart Ppp of... - Process Vents From Continuous Unit Operations-Monitoring, Recordkeeping, and Reporting Requirements

Code of Federal Regulations, 2012 CFR

2012-07-01

... absorbent is used. Condenser Exit temperature Maximum temperature. Carbon adsorber Total regeneration stream mass or volumetric flow during carbon bed regeneration cycle; and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s)) Maximum mass or volumetric flow; and...

40 CFR Table 7 to Subpart Ppp of... - Process Vents From Continuous Unit Operations-Monitoring, Recordkeeping, and Reporting Requirements

Code of Federal Regulations, 2011 CFR

2011-07-01

... absorbent is used. Condenser Exit temperature Maximum temperature. Carbon adsorber Total regeneration stream mass or volumetric flow during carbon bed regeneration cycle; and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s)) Maximum mass or volumetric flow; and...

40 CFR Table 7 to Subpart U of... - Operating Parameters for Which Monitoring Levels Are Required To Be Established for Continuous...

Code of Federal Regulations, 2010 CFR

2010-07-01

.... Condenser Exit temperature Maximum temperature. Carbon adsorber Total regeneration steam flow or nitrogen flow, or pressure (gauge or absolute) a during carbon bed regeneration cycle; and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s)) Maximum flow or...

40 CFR Table 7 to Subpart U of... - Operating Parameters for Which Monitoring Levels Are Required To Be Established for Continuous...

Code of Federal Regulations, 2011 CFR

2011-07-01

.... Condenser Exit temperature Maximum temperature. Carbon adsorber Total regeneration steam flow or nitrogen flow, or pressure (gauge or absolute) a during carbon bed regeneration cycle; and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s)) Maximum flow or...

40 CFR Table 7 to Subpart U of... - Operating Parameters for Which Monitoring Levels Are Required To Be Established for Continuous...

Code of Federal Regulations, 2013 CFR

2013-07-01

.... Condenser Exit temperature Maximum temperature. Carbon adsorber Total regeneration steam flow or nitrogen flow, or pressure (gauge or absolute) a during carbon bed regeneration cycle; and temperature of the carbon bed after regeneration (and within 15 minutes of completing any cooling cycle(s)) Maximum flow or...

24 CFR 880.503 - Maximum annual commitment and project account.

Code of Federal Regulations, 2010 CFR

2010-04-01

... may be contracted for in the ACC is the total of the contract rents and utility allowances for all... commitment exceeds the amount actually paid out under the Contract or ACC each year. Payments will be made... the Contract or ACC for a fiscal year exceeds the maximum annual commitment and would cause the amount...

24 CFR 880.503 - Maximum annual commitment and project account.

Code of Federal Regulations, 2011 CFR

2011-04-01

... may be contracted for in the ACC is the total of the contract rents and utility allowances for all... commitment exceeds the amount actually paid out under the Contract or ACC each year. Payments will be made... the Contract or ACC for a fiscal year exceeds the maximum annual commitment and would cause the amount...

20 CFR 229.48 - Family maximum.

Code of Federal Regulations, 2011 CFR

2011-04-01

... total wages (see 20 CFR 404.203(m)) for the second year before the individual dies or becomes eligible... employee's first month of entitlement to the DIB O/M is July 1980 or later, the family maximum is 85... $804.90. Under the O/M guarantee, the employee would receive $750 since it is higher than his annuity...

40 CFR 464.43 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS METAL MOLDING AND CASTING POINT SOURCE CATEGORY Zinc Casting... copper, lead, zinc, and total phenols. For non-continuous dischargers, annual average mass limitations....0187 Lead (T) 0.0237 0.0116 Zinc (T) 0.0339 0.0129 Maximum for any 1 day Maximum for monthly average...

40 CFR 464.43 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS METAL MOLDING AND CASTING POINT SOURCE CATEGORY Zinc Casting... copper, lead, zinc, and total phenols. For non-continuous dischargers, annual average mass limitations....0187 Lead (T) 0.0237 0.0116 Zinc (T) 0.0339 0.0129 Maximum for any 1 day Maximum for monthly average...

77 FR 4014 - Takes of Marine Mammals Incidental to Specified Activities; Physical Oceanographic Studies in the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-26

... chambers for a total discharge volume of 210 in\\3\\) with a 1,200 m long hydrophone streamer. GI guns will... require the Navy to use species-specific mean maximum densities, rather than the mean average densities... use mean maximum densities, rather than mean average densities. Marine mammal population density...

A surface fuel classification for estimating fire effects

Treesearch

Duncan C. Lutes; Robert E. Keane; John F. Caratti

2009-01-01

We present a classification of duff, litter, fine woody debris, and logs that can be used to stratify a project area into sites with fuel loading that yield significantly different emissions and maximum soil surface temperature. Total particulate matter smaller than 2.5?m in diameter and maximum soil surface temperature were simulated using the First...

Groundwater, surface-water, and water-chemistry data from C-aquifer monitoring program, northeastern Arizona, 2005-11

USGS Publications Warehouse

Brown, Christopher R.; Macy, Jamie P.

2012-01-01

Water-chemistry data for selected wells and baseflow investigations sites are presented. No well samples analyzed exceeded the U.S. Environmental Protection Agency Maximum Contaminant Level standards for drinking water, but several samples exceeded Secondary Maximum Contaminant Level standards for chloride, fluoride, sulfate, iron, and total dissolved solids.

23 CFR 658.17 - Weight.

Code of Federal Regulations, 2010 CFR

2010-04-01

... maximum gross vehicle weight shall be 80,000 pounds except where lower gross vehicle weight is dictated by... of axles, or a vehicle is 20,000 pounds. (d) The maximum gross weight on tandem axles is 34,000... first and last axle is 36 feet or more. In no case shall the total gross weight of a vehicle exceed 80...

40 CFR 432.115 - New source performance standards (NSPS).

Code of Federal Regulations, 2011 CFR

2011-07-01

... Coliform ( 2 ) ( 3 ) O&G (as HEM) 14 8.0 TSS 30 20 1 mg/L (ppm). 2 Maximum of 400 MPN or CFU per 100 mL at... Coliform (2) (3) O&G (as HEM) 14 8.0 TSS 30 20 Total Nitrogen 147 103 1 mg/L (ppm). 2 Maximum of 400 MPN or...

40 CFR 432.115 - New source performance standards (NSPS).

Code of Federal Regulations, 2010 CFR

2010-07-01

... Coliform ( 2 ) ( 3 ) O&G (as HEM) 14 8.0 TSS 30 20 1 mg/L (ppm). 2 Maximum of 400 MPN or CFU per 100 mL at... Coliform (2) (3) O&G (as HEM) 14 8.0 TSS 30 20 Total Nitrogen 147 103 1 mg/L (ppm). 2 Maximum of 400 MPN or...

AEROSOL NUCLEATION AND GROWTH DURING LAMINAR TUBE FLOW: MAXIMUM SATURATIONS AND NUCLEATION RATES. (R827354C008)

EPA Science Inventory

An approximate method of estimating the maximum saturation, the nucleation rate, and the total number nucleated per second during the laminar flow of a hot vapour–gas mixture along a tube with cold walls is described. The basis of the approach is that the temperature an...

23 CFR 771.113 - Timing of Administration activities.

Code of Federal Regulations, 2011 CFR

2011-04-01

... related environmental laws and regulations to the maximum extent possible during the NEPA process. This... as otherwise provided in law or in paragraph (d) of this section: (1)(i) The action has been... funding for hardship and protective acquisitions. (4) FHWA regulations at 23 CFR 710.501 address early...

23 CFR 771.113 - Timing of Administration activities.

Code of Federal Regulations, 2013 CFR

2013-04-01

... related environmental laws and regulations to the maximum extent possible during the NEPA process. This... as otherwise provided in law or in paragraph (d) of this section: (1)(i) The action has been... funding for hardship and protective acquisitions. (4) FHWA regulations at 23 CFR 710.501 address early...

23 CFR 771.113 - Timing of Administration activities.

Code of Federal Regulations, 2012 CFR

2012-04-01

... related environmental laws and regulations to the maximum extent possible during the NEPA process. This... as otherwise provided in law or in paragraph (d) of this section: (1)(i) The action has been... funding for hardship and protective acquisitions. (4) FHWA regulations at 23 CFR 710.501 address early...

23 CFR 771.113 - Timing of Administration activities.

Code of Federal Regulations, 2014 CFR

2014-04-01

... related environmental laws and regulations to the maximum extent possible during the NEPA process. This... as otherwise provided in law or in paragraph (d) of this section: (1)(i) The action has been... funding for hardship and protective acquisitions. (4) FHWA regulations at 23 CFR 710.501 address early...

Communicating research results

Treesearch

Jan Fryk

1999-01-01

A research finding is of little value until it is known and applied. Hence) communication of results should be regarded as a natural, integrated part of research) and thus addressed in the research plans from the very beginning. A clearly defined information strategy and operational goals for information activities are needed for successful communication. For maximum...

State Resource Guide for School Volunteer Coordinators.

ERIC Educational Resources Information Center

South Carolina State Dept. of Education, Columbia.

This resource guide for school volunteer coordinators aids them in developing and maintaining a school volunteer program. Topics addressed include (1) making maximum use of community volunteer resources; (2) building a network of resource people and interfacing school support groups; (3) setting up the school volunteer program; (4)…

State Resource Guide for School Volunteer Coordinators.

ERIC Educational Resources Information Center

South Carolina State Dept. of Education, Columbia.

This resource guide was designed to help school volunteer coordinators develop and maintain a school volunteer program. Topics addressed include: (1) making maximum use of volunteer resources; (2) building a network of resource people from school support groups; (3) setting up a school volunteer program; (4) responsibilities of volunteers and…

40 CFR 1051.125 - What maintenance instructions must I give to buyers?

Code of Federal Regulations, 2010 CFR

2010-07-01

... maintenance steps to address engine operation that is not atypical, or that the maintenance is unlikely to... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Emission... maintenance step, recommend the maximum feasible interval for this maintenance, include your rationale with...

48 CFR 12.302 - Tailoring of provisions and clauses for the acquisition of commercial items.

Code of Federal Regulations, 2010 CFR

2010-10-01

... relative volume of the Government's acquisitions in the specific market, contracting officers may, within the limitations of this subpart, and after conducting appropriate market research, tailor the... established in this subpart are intended to address, to the maximum extent practicable, commercial market...

48 CFR 12.302 - Tailoring of provisions and clauses for the acquisition of commercial items.

Code of Federal Regulations, 2011 CFR

2011-10-01

... relative volume of the Government's acquisitions in the specific market, contracting officers may, within the limitations of this subpart, and after conducting appropriate market research, tailor the... established in this subpart are intended to address, to the maximum extent practicable, commercial market...

10 CFR 590.202 - Contents of applications.

Code of Federal Regulations, 2011 CFR

2011-01-01

... the exact legal name of the applicant, the names, titles, and mailing addresses of a maximum of two... participants in the transaction, including the parent company, if any, and identification of any corporate or... assessments changes. (c) The application shall also have attached a statement, including a signed opinion of...

10 CFR 590.202 - Contents of applications.

Code of Federal Regulations, 2014 CFR

2014-01-01

... the exact legal name of the applicant, the names, titles, and mailing addresses of a maximum of two... participants in the transaction, including the parent company, if any, and identification of any corporate or... assessments changes. (c) The application shall also have attached a statement, including a signed opinion of...

10 CFR 590.202 - Contents of applications.

Code of Federal Regulations, 2013 CFR

2013-01-01

... the exact legal name of the applicant, the names, titles, and mailing addresses of a maximum of two... participants in the transaction, including the parent company, if any, and identification of any corporate or... assessments changes. (c) The application shall also have attached a statement, including a signed opinion of...

10 CFR 590.202 - Contents of applications.

Code of Federal Regulations, 2012 CFR

2012-01-01

... the exact legal name of the applicant, the names, titles, and mailing addresses of a maximum of two... participants in the transaction, including the parent company, if any, and identification of any corporate or... assessments changes. (c) The application shall also have attached a statement, including a signed opinion of...

Planning a New School for Visually Handicapped Children in Nigeria.

ERIC Educational Resources Information Center

Shown, D. G.

The paper addresses considerations in planning a new school for visually impaired students in Nigeria. Site considerations touch upon safety, maximum educational achievement, adequate space for practicing mobility and future expansion, catchment area, and financial involvement. Curriculum considerations include use of a braille production machine,…

A Climatology of Midlatitude Continental Clouds from the ARM SGP Central Facility. Part II; Cloud Fraction and Radiative Forcing

NASA Technical Reports Server (NTRS)

Dong, Xiquan; Xi, Baike; Minnis, Patrick

2006-01-01

Data collected at the Department of Energy Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) central facility are analyzed for determining the variability of cloud fraction and radiative forcing at several temporal scales between January 1997 and December 2002. Cloud fractions are estimated for total cloud cover and for single-layer low (0-3 km), middle (3-6 km), and high clouds (greater than 6 km) using ARM SGP ground-based paired lidar-radar measurements. Shortwave (SW), longwave (LW), and net cloud radiative forcings (CRF) are derived from up- and down-looking standard precision spectral pyranometers and precision infrared radiometer measurements. The annual averages of total, and single-layer, nonoverlapped low, middle and high cloud fractions are 0.49, 0.11, 0.03, and 0.17, respectively. Total and low cloud amounts were greatest from December through March and least during July and August. The monthly variation of high cloud amount is relatively small with a broad maximum from May to August. During winter, total cloud cover varies diurnally with a small amplitude, mid-morning maximum and early evening minimum, and during summer it changes by more than 0.14 over the daily cycle with a pronounced early evening minimum. The diurnal variations of mean single-layer cloud cover change with season and cloud height. Annual averages of all-sky, total, and single-layer high, middle, and low LW CRFs are 21.4, 40.2, 16.7, 27.2, and 55.0 Wm(sup -2), respectively; and their SW CRFs are -41.5, -77.2, -37.0, -47.0, and -90.5 Wm(sup -2). Their net CRFs range from -20 to -37 Wm(sup -2). For all-sky, total, and low clouds, the maximum negative net CRFs of -40.1, -70, and -69.5 Wm(sup -2), occur during April; while the respective minimum values of -3.9, -5.7, and -4.6 Wm(sup -2), are found during December. July is the month having maximum negative net CRF of -46.2 Wm(sup -2) for middle clouds, and May has the maximum value of -45.9 Wm(sup -2) for high clouds. An uncertainty analysis demonstrates that the calculated CRFs are not significantly affected by the difference between clear-sky and cloudy conditions. A more comprehensive cloud fraction study from both surface and satellite observations will follow.

Acute effect of ozone exposure on daily mortality in seven cities of Jiangsu Province, China: No clear evidence for threshold.

PubMed

Chen, Kai; Zhou, Lian; Chen, Xiaodong; Bi, Jun; Kinney, Patrick L

2017-05-01

Few multicity studies have addressed the health effects of ozone in China due to the scarcity of ozone monitoring data. A critical scientific and policy-relevant question is whether a threshold exists in the ozone-mortality relationship. Using a generalized additive model and a univariate random-effects meta-analysis, this research evaluated the relationship between short-term ozone exposure and daily total mortality in seven cities of Jiangsu Province, China during 2013-2014. Spline, subset, and threshold models were applied to further evaluate whether a safe threshold level exists. This study found strong evidence that short-term ozone exposure is significantly associated with premature total mortality. A 10μg/m 3 increase in the average of the current and previous days' maximum 8-h average ozone concentration was associated with a 0.55% (95% posterior interval: 0.34%, 0.76%) increase of total mortality. This finding is robust when considering the confounding effect of PM 2.5 , PM 10 , NO 2 , and SO 2 . No consistent evidence was found for a threshold in the ozone-mortality concentration-response relationship down to concentrations well below the current Chinese Ambient Air Quality Standard (CAAQS) level 2 standard (160μg/m 3 ). Our findings suggest that ozone concentrations below the current CAAQS level 2 standard could still induce increased mortality risks in Jiangsu Province, China. Continuous air pollution control measures could yield important health benefits in Jiangsu Province, China, even in cities that meet the current CAAQS level 2 standard. Copyright © 2017 Elsevier Inc. All rights reserved.

Acute effect of ozone exposure on daily mortality in seven cities of Jiangsu Province, China: No clear evidence for threshold

PubMed Central

Chen, Kai; Zhou, Lian; Chen, Xiaodong; Bi, Jun; Kinney, Patrick L.

2017-01-01

Background Few multicity studies have addressed the health effects of ozone in China due to the scarcity of ozone monitoring data. A critical scientific and policy-relevant question is whether a threshold exists in the ozone-mortality relationship. Methods Using a generalized additive model and a univariate random-effects meta-analysis, this research evaluated the relationship between short-term ozone exposure and daily total mortality in seven cities of Jiangsu Province, China during 2013–2014. Spline, subset, and threshold models were applied to further evaluate whether a safe threshold level exists. Results This study found strong evidence that short-term ozone exposure is significantly associated with premature total mortality. A 10 μg/m3 increase in the average of the current and previous days’ maximum 8-h average ozone concentration was associated with a 0.55% (95% posterior interval: 0.34%, 0.76%) increase of total mortality. This finding is robust when considering the confounding effect of PM2.5, PM10, NO2, and SO2. No consistent evidence was found for a threshold in the ozone-mortality concentration-response relationship down to concentrations well below the current Chinese Ambient Air Quality Standard (CAAQS) level 2 standard (160 μg/m3). Conclusions Our findings suggest that ozone concentrations below the current CAAQS level 2 standard could still induce increased mortality risks in Jiangsu Province, China. Continuous air pollution control measures could yield important health benefits in Jiangsu Province, China, even in cities that meet the current CAAQS level 2 standard. PMID:28231551

Assessing roadway contributions to stormwater flows, concentrations, and loads with the StreamStats application

USGS Publications Warehouse

Stonewall, Adam; Granato, Gregory E.; Haluska, Tana L.

2018-01-01

The Oregon Department of Transportation (ODOT) and other state departments of transportation need quantitative information about the percentages of different land cover categories above any given stream crossing in the state to assess and address roadway contributions to water-quality impairments and resulting total maximum daily loads. The U.S. Geological Survey, in cooperation with ODOT and the FHWA, added roadway and land cover information to the online StreamStats application to facilitate analysis of stormwater runoff contributions from different land covers. Analysis of 25 delineated basins with drainage areas of about 100 mi2 indicates the diversity of land covers in the Willamette Valley, Oregon. On average, agricultural, developed, and undeveloped land covers comprise 15%, 2.3%, and 82% of these basin areas. On average, these basins contained about 10 mi of state highways and 222 mi of non-state roads. The Stochastic Empirical Loading and Dilution Model was used with available water-quality data to simulate long-term yields of total phosphorus from highways, non-highway roadways, and agricultural, developed, and undeveloped areas. These yields were applied to land cover areas obtained from StreamStats for the Willamette River above Wilsonville, Oregon. This analysis indicated that highway yields were larger than yields from other land covers because highway runoff concentrations were higher than other land covers and the highway is fully impervious. However, the total highway area was a fraction of the other land covers. Accordingly, highway runoff mitigation measures can be effective for managing water quality locally, they may have limited effect on achieving basin-wide stormwater reduction goals.

Value of FDG-PET/CT Volumetry After Chemoradiotherapy in Rectal Cancer.

PubMed

Okuno, Takayuki; Kawai, Kazushige; Koyama, Keitaro; Takahashi, Miwako; Ishihara, Soichiro; Momose, Toshimitsu; Morikawa, Teppei; Fukayama, Masashi; Watanabe, Toshiaki

2018-03-01

Neoadjuvant chemoradiotherapy followed by an optimal surgery is the standard treatment for patients with locally advanced rectal cancer. FDG-PET/CT is commonly used as the modality for assessing the effect of chemoradiotherapy. The purpose of this study was to investigate whether PET/CT-based volumetry could contribute to the prediction of pathological complete response or prognosis after neoadjuvant chemoradiotherapy. This was a retrospective cohort study. This study was conducted at a single research center. Ninety-one consecutive patients with locally advanced rectal cancer were enrolled between January 2005 and December 2015. Patients underwent PET/CT before and after neoadjuvant chemoradiotherapy. Maximum standardized uptake value and total lesion glycolysis on PET/CT before and after neoadjuvant chemoradiotherapy were calculated using isocontour methods. Correlations between these variables and clinicopathological factors and prognosis were assessed. PET/CT-associated variables before chemoradiotherapy were not correlated with either clinicopathological factors or prognosis. Maximum standardized uptake value was associated with pathological complete response, but total lesion glycolysis was not. Maximum standardized uptake value correlated with ypT, whereas total lesion glycolysis correlated with both ypT and ypN. High total lesion glycolysis was associated with a considerably poorer prognosis; the 5-year recurrence rate was 65% and the 5-year mortality rate 42%, whereas in lesions with low total lesion glycolysis, these were 6% and 2%. On multivariate analysis, high total lesion glycolysis was an independent risk factor for recurrence (HR = 4.718; p = 0.04). The gain in fluoro-2-deoxy-D-glucose uptake may differ between scanners, thus the general applicability of this threshold should be validated. In patients with locally advanced rectal cancer, high total lesion glycolysis after neoadjuvant chemoradiotherapy is strongly associated with a worse prognosis. Total lesion glycolysis after chemoradiotherapy may be a promising preoperative predictor of recurrence and death. See Video Abstract at http://links.lww.com/DCR/A464.

Measurement-noise maximum as a signature of a phase transition.

PubMed

Chen, Zhi; Yu, Clare C

2007-02-02

We propose that a maximum in measurement noise can be used as a signature of a phase transition. As an example, we study the energy and magnetization noise spectra associated with first- and second-order phase transitions by using Monte Carlo simulations of the Ising model and 5-state Potts model in two dimensions. For a finite size system, the total noise power and the low frequency white noise S(f0 and the total noise power vanishes. f(-1)(knee) is approximately the equilibration time.

Distribution of Carbon Uptake Capacity of Plant Functional Groups Across the Canopy Gradient in Old-Growth Tropical Wet Forest in Costa Rica

NASA Astrophysics Data System (ADS)

Oberbauer, S. F.; Cruz, H. O.; Ryan, M. G.; Clark, D. B.; Clark, D. A.; Olivas, P.

2004-12-01

Because of the difficulties of accessing leaves within tree crowns, little is known about the photosynthetic capacity of different functional groups within tropical rain forest canopies. To address this deficiency, we measured photosynthetic capacity (Amax) in situ along vertical transects through old-growth forest canopy using a mobile walkup tower at the La Selva Biological Station in Costa Rica. We asked: What groups are responsible for most C-fixation and at what height in the canopy does most C-fixation occur? Photosynthesis (using a LI-COR Li-6400) and total leaf area were measured for all vascular plant species encountered within the tower footprint (4.6 m2). Plants were grouped into trees, palms, ferns, lianas, epiphytes, herbs, Pentaclethra macroloba (the dominant canopy tree), and vines. Amax values differed among functional groups. The ranking of Amax among the groups was trees > P. macroloba > palms > lianas > vines > epiphytes > herbs > ferns. Trees and P. macroloba had the highest photosynthetic rates, but the maximum rates occur at different heights. Amax of P. macroloba increases with canopy height to a maximum 10.3 \\mumol m-2 s-1 at 17.5 m. Amax of trees increases with canopy height (r2 = 0.77) and attains the highest Amax at 32.5 m (10.6 \\mumol m-2 s-1). Palms and lianas presented similar patterns of Amax. However, lianas reach the canopy top whereas palms are shorter and were not observed above 27.5 m. The maximum photosynthetic rates for both groups were: lianas 9.2 \\mumol m-2 s-1 at 27.5 m and palms 9.6 \\mumol m-2 s-1 at 17.5 m. By scaling the functional group Amax values with their leaf area, we estimated that most of the photosynthetic capacity occurs between 17.5 m and 37.5 m and is attributed mainly to trees, followed by P. macroloba and then lianas.

Assessing Foods Offered in the Food Distribution Program on Indian Reservations (FDPIR) Using Healthy Eating Index-2010

PubMed Central

Shanks, Carmen Byker; Smith, Teresa; Ahmed, Selena; Hunts, Holly

2017-01-01

Objective To assess the nutritional quality of food packages offered in the Food Distribution Program on Indian Reservations (FDPIR) program using Healthy Eating Index-2010 (HEI-2010). Design Data were collected from the list of the food products provided by the United States Department of Agriculture’s Food and Nutrition Handbook 501 for FDPIR. Nutritional quality was measured through a cross-sectional analysis of five randomly selected food packages offered through FDPIR. HEI-2010 component and total scores were calculated for each food package. Analysis of variance and t-tests assessed significant differences between food packages and HEI-2010 maximum scores, respectively. Setting This study took place in the United States. Subjects Study units included food products offered through FDPIR. Results The mean total HEI-2010 score for the combined FDPIR food packages was significantly lower than the total HEI-2010 maximum score of 100 (66.38, SD=11.60; p<0.01). Mean scores for total fruit (3.52, SD=0.73; p<0.05), total vegetables (2.58, SD=0.15; p<0.001), greens and beans (0.92, SD=1.00; p<0.001), dairy (5.12, SD=0.63; p<0.001), total protein foods (4.14, SD=0.56; p<0.05), and refined grains (3.04, SD=2.90; p<0.001) were all significantly lower than the maximum values. Conclusions The FDPIR food package HEI-2010 score was notably higher than other federal food assistance and nutrition programs. Study findings highlight opportunities for the FDPIR to modify its offerings to best support lifestyles towards prevention of diet-related chronic disease. PMID:26298513

A screening-level modeling approach to estimate nitrogen ...

EPA Pesticide Factsheets

This paper presents a screening-level modeling approach that can be used to rapidly estimate nutrient loading and assess numerical nutrient standard exceedance risk of surface waters leading to potential classification as impaired for designated use. It can also be used to explore best management practice (BMP) implementation to reduce loading. The modeling framework uses a hybrid statistical and process based approach to estimate source of pollutants, their transport and decay in the terrestrial and aquatic parts of watersheds. The framework is developed in the ArcGIS environment and is based on the total maximum daily load (TMDL) balance model. Nitrogen (N) is currently addressed in the framework, referred to as WQM-TMDL-N. Loading for each catchment includes non-point sources (NPS) and point sources (PS). NPS loading is estimated using export coefficient or event mean concentration methods depending on the temporal scales, i.e., annual or daily. Loading from atmospheric deposition is also included. The probability of a nutrient load to exceed a target load is evaluated using probabilistic risk assessment, by including the uncertainty associated with export coefficients of various land uses. The computed risk data can be visualized as spatial maps which show the load exceedance probability for all stream segments. In an application of this modeling approach to the Tippecanoe River watershed in Indiana, USA, total nitrogen (TN) loading and risk of standard exce

Total Mercury, Methylmercury, Inorganic Arsenic and Other Elements in Meat from Minke Whale (Balaenoptera acutorostrata) from the North East Atlantic Ocean.

PubMed

Maage, Amund; Nilsen, Bente M; Julshamn, Kaare; Frøyland, Livar; Valdersnes, Stig

2017-08-01

Meat samples of 84 minke whales (Balaenoptera acutorostrata) mainly from the Barents Sea, collected between 1 May and 16 August 2011, were analyzed for total mercury, methylmercury, cadmium, lead, total arsenic, inorganic arsenic and selenium. The average total mercury concentration found was 0.15 ± 0.09 mg/kg, with a range from 0.05 to 0.49 mg/kg. The molar ratio of selenium to mercury varied between 1.0 and 10.3. Cadmium content ranged from 0.002 to 0.036 mg/kg, while the content of lead in whale meat ranged from <0.01 to 0.09 mg/kg. None of the whale samples exceeded established EU maximum levels for metals in fish muscle, but 4.8% and 6.8% of the samples exceeded Japanese maximum levels for total mercury and methylmercury, respectively, in whale meat. There was only minor variations in element concentrations between whales from different geographical areas, and cadmium was the only element were the concentration increased with increasing length.

Sun protection policies of Australian primary schools in a region of high sun exposure.

PubMed

Harrison, S L; Garzón-Chavez, D R; Nikles, C J

2016-06-01

Queensland, Australia has the highest rates of skin cancer globally. Predetermined criteria were used to score the comprehensiveness of sun protection policies (SPP) of primary schools across Queensland. SPP were sought for schools in 10 regions (latitude range 16.3°S-28.1°S) from 2011 to 2014. Of the 723 schools sampled, 90.9% had a written SPP available publicly. Total SPP scores were low {mean 3.6 [95% CI: 3.4-3.9]; median 2 [interquartile range (IQR) 2, 4]}, with only 3.2% of schools achieving the maximum score of 12. Median SPP scores were higher in Northern and Central Queensland [both 2 (IQR 2, 6) and (IQR 2, 5), respectively] than in Southern Queensland [2 (IQR 2, 3); P = 0.004]. Clothing and hat-wearing were addressed in most policies (96% and 89%) while few schools used their SPP to plan outdoor events (5.2%) or reschedule activities to minimize sun exposure (11.7%). The SunSmart Schools program has been operating in Queensland for 17 years, and while most primary schools now have a written SPP, most are not comprehensive. Incentive-based approaches (5-star-rating award scheme and grants) may assist in addressing this issue, to reduce sun exposure of students and teachers. These data provide a baseline from which improvements in the comprehensiveness of school SPPs can be evaluated. © The Author 2016. Published by Oxford University Press. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Automotive Stirling Engine Development Program Mod I Stirling engine development

NASA Technical Reports Server (NTRS)

Simetkosky, M. A.

1983-01-01

The development of the Mod I 4-cylinder automotive Stirling engine is discussed and illustrated with drawings, block diagrams, photographs, and graphs and tables of preliminary test data. The engine and its drive, cold-engine, hot-engine, external-heat, air/fuel, power-control, electronic-control, and auxiliary systems are characterized. Performance results from a total of 1900 h of tests on 4 prototype engines include average maximum efficiency (at 2000 rpm) 34.5 percent and maximum output power 54.4 kW. The modifications introduced in an upgraded version of the Mod I are explained; this engine has maximum efficiency 40.4 percent and maximum power output 69.2 kW.

Leaching behavior of total organic carbon, nitrogen, and phosphorus from banana peel.

PubMed

Jiang, Ruixue; Sun, Shujuan; Xu, Yan; Qiu, Xiudong; Yang, Jili; Li, Xiaochen

2015-01-01

The leaching behavior of organic carbon and nutrient compounds from banana peel (BP) was investigated in batch assays with respect to particle size, contact time, pH value, and temperature. The granularity, contact time, pH, and temperature caused no significant effects on the leaching of total phosphorus (TP) from the BP. The maximum leached total nitrogen (TN) content was found at pH 5.0 and 90 minutes, while no significant effects were caused by the granularity and temperature. The maximum leached total organic carbon (TOC) content was found by using a powder of 40 mesh, 150 minutes and at pH 6.0, while the temperature had no effect on the TOC leaching. The proportions of the TN, TP, and TOC contents leached from the dried BP ranged from 33.6% to 40.9%, 60.4% to 72.7%, and 8.2% to 9.9%, respectively, indicating that BP could be a potential pollution source for surface and ground water if discharged as domestic waste or reutilized without pretreatment.

Use of body plethysmography to measure effect of bimaxillary orthognathic surgery on airway resistance and lung volumes.

PubMed

Rezaeetalab, Fariba; Kazemian, Mozhgan; Vaezi, Touraj; Shaban, Barratollah

2015-12-01

Bimaxillary orthognathic surgery can cause changes to respiration and the airways. We used body plethysmography to evaluate its effect on airway resistance and lung volumes in 20 patients with class III malocclusions (8 men and 12 women, aged 17 - 32 years). Lung volumes (forced vital capacity; forced inspiratory volume/one second; forced expiratory volume/one second: forced vital capacity; peak expiratory flow; maximum expiratory flow 25-75; maximum inspiratory flow; total lung capacity; residual volume; residual volume:total lung capacity), and airway resistance were evaluated one week before, and six months after, operation. Bimaxillary operations to correct class III malocclusions significantly increased airway resistance, residual volume, total lung capacity, and residual volume:total lung capacity. Other variables also changed after operation but not significantly so. Orthognathic operations should be done with caution in patients who have pre-existing respiratory diseases. Copyright © 2015 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Independent Assessment Plan: LAV-25

DTIC Science & Technology

1989-06-27

Pages. Enter the total Block 7. Performing Organization Name(s) and number of pages. Address(es. Self -explanatory. Block 16. Price Code, Enter...organization Blocks 17. - 19. Security Classifications. performing the report. Self -explanatory. Enter U.S. Security Classification in accordance with U.S...Security Block 9. S oonsorina/Monitoring Acenc Regulations (i.e., UNCLASSIFIED). If form .Names(s) and Address(es). Self -explanatory. contains classified

Forecasting models for sugi (Cryptomeria japonica D. Don) pollen count showing an alternate dispersal rhythm.

PubMed

Ito, Yukiko; Hattori, Reiko; Mase, Hiroki; Watanabe, Masako; Shiotani, Itaru

2008-12-01

Pollen information is indispensable for allergic individuals and clinicians. This study aimed to develop forecasting models for the total annual count of airborne pollen grains based on data monitored over the last 20 years at the Mie Chuo Medical Center, Tsu, Mie, Japan. Airborne pollen grains were collected using a Durham sampler. Total annual pollen count and pollen count from October to December (OD pollen count) of the previous year were transformed to logarithms. Regression analysis of the total pollen count was performed using variables such as the OD pollen count and the maximum temperature for mid-July of the previous year. Time series analysis revealed an alternate rhythm of the series of total pollen count. The alternate rhythm consisted of a cyclic alternation of an "on" year (high pollen count) and an "off" year (low pollen count). This rhythm was used as a dummy variable in regression equations. Of the three models involving the OD pollen count, a multiple regression equation that included the alternate rhythm variable and the interaction of this rhythm with OD pollen count showed a high coefficient of determination (0.844). Of the three models involving the maximum temperature for mid-July, those including the alternate rhythm variable and the interaction of this rhythm with maximum temperature had the highest coefficient of determination (0.925). An alternate pollen dispersal rhythm represented by a dummy variable in the multiple regression analysis plays a key role in improving forecasting models for the total annual sugi pollen count.

Biogeographical drivers of ragweed pollen concentrations in Europe

NASA Astrophysics Data System (ADS)

Matyasovszky, István; Makra, László; Tusnády, Gábor; Csépe, Zoltán; Nyúl, László G.; Chapman, Daniel S.; Sümeghy, Zoltán; Szűcs, Gábor; Páldy, Anna; Magyar, Donát; Mányoki, Gergely; Erostyák, János; Bodnár, Károly; Bergmann, Karl-Christian; Deák, Áron József; Thibaudon, Michel; Albertini, Roberto; Bonini, Maira; Šikoparija, Branko; Radišić, Predrag; Gehrig, Regula; Rybníček, Ondřej; Severova, Elena; Rodinkova, Victoria; Prikhodko, Alexander; Maleeva, Anna; Stjepanović, Barbara; Ianovici, Nicoleta; Berger, Uwe; Seliger, Andreja Kofol; Weryszko-Chmielewska, Elżbieta; Šaulienė, Ingrida; Shalaboda, Valentina; Yankova, Raina; Peternel, Renata; Ščevková, Jana; Bullock, James M.

2017-06-01

The drivers of spatial variation in ragweed pollen concentrations, contributing to severe allergic rhinitis and asthma, are poorly quantified. We analysed the spatiotemporal variability in 16-year (1995-2010) annual total (66 stations) and annual total (2010) (162 stations) ragweed pollen counts and 8 independent variables (start, end and duration of the ragweed pollen season, maximum daily and calendar day of the maximum daily ragweed pollen counts, last frost day in spring, first frost day in fall and duration of the frost-free period) for Europe (16 years, 1995-2010) as a function of geographical coordinates. Then annual total pollen counts, annual daily peak pollen counts and date of this peak were regressed against frost-related variables, daily mean temperatures and daily precipitation amounts. To achieve this, we assembled the largest ragweed pollen data set to date for Europe. The dependence of the annual total ragweed pollen counts and the eight independent variables against geographical coordinates clearly distinguishes the three highly infected areas: the Pannonian Plain, Western Lombardy and the Rhône-Alpes region. All the eight variables are sensitive to longitude through its temperature dependence. They are also sensitive to altitude, due to the progressively colder climate with increasing altitude. Both annual total pollen counts and the maximum daily pollen counts depend on the start and the duration of the ragweed pollen season. However, no significant changes were detected in either the eight independent variables as a function of increasing latitude. This is probably due to a mixed climate induced by strong geomorphological inhomogeneities in Europe.

Real waiting times for surgery. Proposal for an improved system for their management.

PubMed

Abásolo, Ignacio; Barber, Patricia; González López-Valcárcel, Beatriz; Jiménez, Octavio

2014-01-01

In Spain, official information on waiting times for surgery is based on the interval between the indication for surgery and its performance. We aimed to estimate total waiting times for surgical procedures, including outpatient visits and diagnostic tests prior to surgery. In addition, we propose an alternative system to manage total waiting times that reduces variability and maximum waiting times without increasing the use of health care resources. This system is illustrated by three surgical procedures: cholecystectomy, carpal tunnel release and inguinal/femoral hernia repair. Using data from two Autonomous Communities, we adjusted, through simulation, a theoretical distribution of the total waiting time assuming independence of the waiting times of each stage of the clinical procedure. We show an alternative system in which the waiting time for the second consultation is established according to the time previously waited for the first consultation. Average total waiting times for cholecystectomy, carpal tunnel release and inguinal/femoral hernia repair were 331, 355 and 137 days, respectively (official data are 83, 68 and 73 days, respectively). Using different negative correlations between waiting times for subsequent consultations would reduce maximum waiting times by between 2% and 15% and substantially reduce heterogeneity among patients, without generating higher resource use. Total waiting times are between two and five times higher than those officially published. The relationship between the waiting times at each stage of the medical procedure may be used to decrease variability and maximum waiting times. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

Streamflow and Erosion Response to Prolonged Intense Rainfall of November 1-2, 2000, Island of Hawaii, Hawaii

USGS Publications Warehouse

Fontaine, Richard A.; Hill, Barry R.

2002-01-01

A combination of several meteorologic and topographic factors produced extreme rainfall over the eastern part of the island of Hawaii on November 1-2, 2000. Storm rainfall was concentrated in two distinct areas, the Waiakea and Kapapala areas, where maximum rainfall totals of 32.47 and 38.97 inches were recorded. Resultant flooding caused damages in excess of 70 million dollars, among the highest totals associated with flooding in the State's history. Storm rainfall had recurrence intervals that ranged from 10 years or less for maximum 1-hour totals to 100 years or more for maximum 24-hour totals As part of this study, peak flow and/or erosion data were collected at 41 sites. Analyses of these data indicated that peak discharges of record occurred at 6 of 12 sites where historic data were available. Peak flows with estimated recurrence intervals from 50 to over 100 years were recorded at 4 of 11 sites. Peak flows were poorly correlated with total storm rainfall. Critical rainfall durations associated with peak flows ranged from 1 to 12 hours and were about 3 hours at most sites. Rainfall-runoff computations and field observations indicated that infiltration-excess overland flow alone was not sufficient to have caused the observed flood peaks and therefore saturation-excess overland flow and subsurface flow probably contributed to peak flows at most sites Most hillslope erosion associated with the storm took place along or near the Kaoiki Pali in the Kapapala area. Hillslope erosion was predominately caused by overland flow.

40 CFR 421.263 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... for any 1 day Maximum for monthly average mg/troy ounce of precious metals, including silver.../troy ounce of precious metals in the granulated raw material Copper 0.819 0.390 Cyanide (total) 0.128 0... Maximum for monthly average mg/troy ounce of gold produced by cyanide stripping Copper 4.736 2.257 Cyanide...

Cost and production analysis of the Bitterroot Miniyarder on an Appalachian hardwood site

Treesearch

John E. Baumgras; Penn A. Peters; Penn A. Peters

1985-01-01

An 18-horsepower skyline yarder was studied on a steep slope clearcut, yarding small hardwood trees uphill for fuelwood. Yarding cycle characteristics sampled include: total cycle time including delays, 5.20 minutes; yarding distance, 208 feet (350 feet maximum); turn volume, 11.6 cubic feet (24 cubic feet maximum); pieces per turn, 2.3. Cost analysis shows yarding...

13 CFR 107.1160 - Maximum amount of Leverage for a Section 301(d) Licensee.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Leverage, you must maintain Venture Capital Financings (at cost) that equal at least 30 percent of your... maintain at least the same dollar amount of Venture Capital Financings (at cost). (e) Definition of “Total... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Maximum amount of Leverage for a...

High methane natural gas/air explosion characteristics in confined vessel.

PubMed

Tang, Chenglong; Zhang, Shuang; Si, Zhanbo; Huang, Zuohua; Zhang, Kongming; Jin, Zebing

2014-08-15

The explosion characteristics of high methane fraction natural gas were investigated in a constant volume combustion vessel at different initial conditions. Results show that with the increase of initial pressure, the peak explosion pressure, the maximum rate of pressure rise increase due to a higher amount (mass) of flammable mixture, which delivers an increased amount of heat. The increased total flame duration and flame development time result as a consequence of the higher amount of flammable mixture. With the increase of the initial temperature, the peak explosion pressures decrease, but the pressure increase during combustion is accelerated, which indicates a faster flame speed and heat release rate. The maximum value of the explosion pressure, the maximum rate of pressure rise, the minimum total combustion duration and the minimum flame development time is observed when the equivalence ratio of the mixture is 1.1. Additionally, for higher methane fraction natural gas, the explosion pressure and the maximum rate of pressure rise are slightly decreased, while the combustion duration is postponed. The combustion phasing is empirically correlated with the experimental parameters with good fitting performance. Furthermore, the addition of dilute gas significantly reduces the explosion pressure, the maximum rate of pressure rise and postpones the flame development and this flame retarding effect of carbon dioxide is stronger than that of nitrogen. Copyright © 2014 Elsevier B.V. All rights reserved.

Forbearance for fluoxetine: do monoaminergic antidepressants require a number of years to reach maximum therapeutic effect in humans?

PubMed

Fitzgerald, Paul J

2014-07-01

It is of high clinical interest to better understand the timecourse through which psychiatric drugs produce their beneficial effects. While a rough estimate of the time lag between initiating monoaminergic antidepressant therapy and the onset of therapeutic effect in depressed subjects is two weeks, much less is known about when these drugs reach maximum effect. This paper briefly examines studies that directly address this question through long-term antidepressant administration to humans, while also putting forth a simple theoretical approach for estimating the time required for monoaminergic antidepressants to reach maximum therapeutic effect in humans. The theory invokes a comparison between speed of antidepressant drug response in humans and in rodents, focusing on the apparently greater speed in rodents. The principal argument is one of proportions, comparing earliest effects of these drugs in rodents and humans, versus their time to reach maximum effect in these organisms. If the proportionality hypothesis is even coarsely accurate, then applying these values or to some degree their ranges to the hypothesis, may suggest that monoaminergic antidepressants require a number of years to reach maximum effect in humans, at least in some individuals.

Pesticide Residues on Three Cut Flower Species and Potential Exposure of Florists in Belgium.

PubMed

Toumi, Khaoula; Vleminckx, Christiane; van Loco, Joris; Schiffers, Bruno

2016-09-23

In order to assess the prevalence of pesticide contamination and the risk of florists' exposure when handling cut flowers, sampling and analysis of 90 bouquets of the most commonly sold cut flowers in Belgium (50 bouquets of roses; 20 of gerberas, and 20 of chrysanthemums) were carried out. The bouquets were collected from 50 florists located in the seven largest cities of Belgium (Antwerp, Brussels, Charleroi, Ghent, Leuven, Liege, and Namur) and from five supermarkets located in the different regions. To have a better understanding of the route of exposure and professional practices a questionnaire was also addressed to a group of 25 florists who volunteered to take part in the survey. All florists were interviewed individually when collecting the questionnaire. The residual pesticide deposit values on cut flowers were determined in an accredited laboratory using a multi-residue (QuEChERS Quick Easy Cheap Effective Rugged Safe) method and a combination of gas chromatography (GC) and liquid chormatograhphy (LC) analysis. A total of 107 active substances were detected from all samples; i.e., an average of about 10 active substances per bouquet. The most severely contaminated bouquet accumulated a total concentration of residues up to 97 mg/kg. Results show that roses are the most contaminated cut flowers; with an average of 14 substances detected per sample and a total concentration per rose sample of 26 mg/kg. Some active substances present an acute toxicity (acephate, methiocarb, monocrotophos, methomyl, deltamethrin, etc.) and exposure can generate a direct effect on the nervous system of florists. Nevertheless, fungicides (dodemorph, propamocarb, and procymidone) were the most frequently detected in samples and had the highest maximum concentrations out of all the active substances analysed. Dodemorph was the most frequently detected substance with the highest maximum concentration (41.9 mg/kg) measured in the rose samples. It appears from the survey that, despite being exposed to high deposits of residues, florists usually do not protect themselves from contact with residues even if they spend several hours handling cut flowers and preparing bouquets (from 2 to 6 h/day, depending on the time of year and/or selling periods) daily. Bad habits (eating, drinking, or smoking at work) and absence of personal protective equipment of most florists also increase the risk of contact with pesticide residues.

Pesticide Residues on Three Cut Flower Species and Potential Exposure of Florists in Belgium

PubMed Central

Toumi, Khaoula; Vleminckx, Christiane; van Loco, Joris; Schiffers, Bruno

2016-01-01

In order to assess the prevalence of pesticide contamination and the risk of florists’ exposure when handling cut flowers, sampling and analysis of 90 bouquets of the most commonly sold cut flowers in Belgium (50 bouquets of roses; 20 of gerberas, and 20 of chrysanthemums) were carried out. The bouquets were collected from 50 florists located in the seven largest cities of Belgium (Antwerp, Brussels, Charleroi, Ghent, Leuven, Liege, and Namur) and from five supermarkets located in the different regions. To have a better understanding of the route of exposure and professional practices a questionnaire was also addressed to a group of 25 florists who volunteered to take part in the survey. All florists were interviewed individually when collecting the questionnaire. The residual pesticide deposit values on cut flowers were determined in an accredited laboratory using a multi-residue (QuEChERS Quick Easy Cheap Effective Rugged Safe) method and a combination of gas chromatography (GC) and liquid chormatograhphy (LC) analysis. A total of 107 active substances were detected from all samples; i.e., an average of about 10 active substances per bouquet. The most severely contaminated bouquet accumulated a total concentration of residues up to 97 mg/kg. Results show that roses are the most contaminated cut flowers; with an average of 14 substances detected per sample and a total concentration per rose sample of 26 mg/kg. Some active substances present an acute toxicity (acephate, methiocarb, monocrotophos, methomyl, deltamethrin, etc.) and exposure can generate a direct effect on the nervous system of florists. Nevertheless, fungicides (dodemorph, propamocarb, and procymidone) were the most frequently detected in samples and had the highest maximum concentrations out of all the active substances analysed. Dodemorph was the most frequently detected substance with the highest maximum concentration (41.9 mg/kg) measured in the rose samples. It appears from the survey that, despite being exposed to high deposits of residues, florists usually do not protect themselves from contact with residues even if they spend several hours handling cut flowers and preparing bouquets (from 2 to 6 h/day, depending on the time of year and/or selling periods) daily. Bad habits (eating, drinking, or smoking at work) and absence of personal protective equipment of most florists also increase the risk of contact with pesticide residues. PMID:27669276

Determination of Survivable Fires

NASA Technical Reports Server (NTRS)

Dietrich, D. L.; Niehaus, J. E.; Ruff, G. A.; Urban, D. L.; Takahashi, F.; Easton, J. W.; Abbott, A. A.; Graf, J. C.

2012-01-01

At NASA, there exists no standardized design or testing protocol for spacecraft fire suppression systems (either handheld or total flooding designs). An extinguisher's efficacy in safely suppressing any reasonable or conceivable fire is the primary benchmark. That concept, however, leads to the question of what a reasonable or conceivable fire is. While there exists the temptation to over-size' the fire extinguisher, weight and volume considerations on spacecraft will always (justifiably) push for the minimum size extinguisher required. This paper attempts to address the question of extinguisher size by examining how large a fire a crew member could successfully survive and extinguish in the confines of a spacecraft. The hazards to the crew and equipment during an accidental fire include excessive pressure rise resulting in a catastrophic rupture of the vehicle skin, excessive temperatures that burn or incapacitate the crew (due to hyperthermia), carbon dioxide build-up or other accumulation of other combustion products (e.g. carbon monoxide). Estimates of these quantities are determined as a function of fire size and mass of material burned. This then becomes the basis for determining the maximum size of a target fire for future fire extinguisher testing.

An approach for spherical harmonic analysis of non-smooth data

NASA Astrophysics Data System (ADS)

Wang, Hansheng; Wu, Patrick; Wang, Zhiyong

2006-12-01

A method is proposed to evaluate the spherical harmonic coefficients of a global or regional, non-smooth, observable dataset sampled on an equiangular grid. The method is based on an integration strategy using new recursion relations. Because a bilinear function is used to interpolate points within the grid cells, this method is suitable for non-smooth data; the slope of the data may be piecewise continuous, with extreme changes at the boundaries. In order to validate the method, the coefficients of an axisymmetric model are computed, and compared with the derived analytical expressions. Numerical results show that this method is indeed reasonable for non-smooth models, and that the maximum degree for spherical harmonic analysis should be empirically determined by several factors including the model resolution and the degree of non-smoothness in the dataset, and it can be several times larger than the total number of latitudinal grid points. It is also shown that this method is appropriate for the approximate analysis of a smooth dataset. Moreover, this paper provides the program flowchart and an internet address where the FORTRAN code with program specifications are made available.

Humoral and cellular immunity in chromium picolinate-supplemented lambs.

PubMed

Dallago, B S L; McManus, C M; Caldeira, D F; Campeche, A; Burtet, R T; Paim, T P; Gomes, E F; Branquinho, R P; Braz, S V; Louvandini, H

2013-08-01

The effects of oral supplementation of chromium picolinate (CrPic) on humoral and cellular immunity in sheep were investigated. Twenty-four male lambs divided into four treatments and received different dosages of CrPic: placebo (0), 0.250, 0.375, and 0.500 mg of chromium/animal/day during 84 days. The base ration was Panicum maximum cv Massai hay and concentrate. Blood samples were collected fortnightly for total and differential leukocyte counts. On days 28 and 56, the lambs were challenged with chicken ovalbumin I.M. Serum samples were collected on days 46 and 74 and subjected to an indirect enzyme-linked immunosorbent assay to measure IgG anti-ovalbumin. The cell-mediated immune response was determined by a delay-type hypersensitivity test using phytohemagglutinin. CrPic did not significantly affect humoral immunity in lambs but there was a negative effect on cellular immunity (P < 0.05) as Cr supplementation increased. Therefore, the level of Cr supplementation for lambs must be better studied to address its effect on stressed animals or the possible toxic effects of Cr on the animal itself or its immune system.

Thermal Characterization for a Modular 3-D Multichip Module

NASA Technical Reports Server (NTRS)

Fan, Mark S.; Plante, Jeannette; Shaw, Harry

2000-01-01

NASA Goddard Space Flight Center has designed a high-density modular 3-D multichip module (MCM) for future spaceflight use. This MCM features a complete modular structure, i.e., each stack can be removed from the package without damaging the structure. The interconnection to the PCB is through the Column Grid Array (CGA) technology. Because of its high-density nature, large power dissipation from multiple layers of circuitry is anticipated and CVD diamond films are used in the assembly for heat conduction enhancement. Since each stacked layer dissipates certain amount of heat, designing effective heat conduction paths through each stack and balancing the heat dissipation within each stack for optimal thermal performance become a challenging task. To effectively remove the dissipated heat from the package, extensive thermal analysis has been performed with finite element methods. Through these analyses, we are able to improve the thermal design and increase the total wattage of the package for maximum electrical performance. This paper provides details on the design-oriented thermal analysis and performance enhancement. It also addresses issues relating to contact thermal resistance between the diamond film and the metallic heat conduction paths.

Experimental Evaluation of Preservation Techniques for Benzene, Toluene, Ethylbenzene, and Total Xylenes in Water Samples.

PubMed

Arnold, Ray; Kong, Deyuan; Douglas, Gregory; Hardenstine, Jeffery; Rouhani, Shahrokh; Gala, William

2018-01-01

An experiment was designed to address the validity of the prescribed maximum allowable holding-time limit of 14 days when acidified at < 2 pH and maintained at 4°C to prevent significant loss of benzene, toluene, ethyl benzene, and xylenes (BTEX) in preserved water samples. Preservation methods prescribed by the United State Environmental Protection Agency were used as well as adaptions of that procedure to determine stability between 3 and 21 days. Water samples preserved at 4°C and pH of < 2 with hydrochloric acid did not result in unacceptable (> 15%) BTEX losses during the study as defined by procedures and statistical methods described by the American Society for Testing and Materials International. In addition, water samples preserved only with acid (pH < 2) at ambient temperatures (20-27°C) also provided acceptable results during the 21-day study. These results have demonstrated the acceptability of BTEX data derived from water samples exceeding the standard holding-time and/or temperature limits.

Longitudinal Mediation Analysis with Time-varying Mediators and Exposures, with Application to Survival Outcomes

PubMed Central

Zheng, Wenjing; van der Laan, Mark

2017-01-01

In this paper, we study the effect of a time-varying exposure mediated by a time-varying intermediate variable. We consider general longitudinal settings, including survival outcomes. At a given time point, the exposure and mediator of interest are influenced by past covariates, mediators and exposures, and affect future covariates, mediators and exposures. Right censoring, if present, occurs in response to past history. To address the challenges in mediation analysis that are unique to these settings, we propose a formulation in terms of random interventions based on conditional distributions for the mediator. This formulation, in particular, allows for well-defined natural direct and indirect effects in the survival setting, and natural decomposition of the standard total effect. Upon establishing identifiability and the corresponding statistical estimands, we derive the efficient influence curves and establish their robustness properties. Applying Targeted Maximum Likelihood Estimation, we use these efficient influence curves to construct multiply robust and efficient estimators. We also present an inverse probability weighted estimator and a nested non-targeted substitution estimator for these parameters. PMID:29387520

40 CFR 422.43 - Effluent limitations and guidelines representing the degree of effluent reduction attainable by...

Code of Federal Regulations, 2011 CFR

2011-07-01

... values for 30 consecutive days shall not exceed— Total phosphorus (as P) 105 35 Fluoride (as F) 75 25 (d... Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed— Total phosphorus...

40 CFR 422.43 - Effluent limitations and guidelines representing the degree of effluent reduction attainable by...

Code of Federal Regulations, 2010 CFR

2010-07-01

... values for 30 consecutive days shall not exceed— Total phosphorus (as P) 105 35 Fluoride (as F) 75 25 (d... Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed— Total phosphorus...

Contributions of Tropical Cyclones to the North Atlantic Climatological Rainfall as Observed from Satellites

NASA Technical Reports Server (NTRS)

Rodgers, Edward B.; Adler, Robert F.; Pierce, Harold F.; Einaudi, Franco (Technical Monitor)

2000-01-01

The tropical cyclone rainfall climatology study that was performed for the North Pacific was extended to the North Atlantic. Similar to the North Pacific tropical cyclone study, mean monthly rainfall within 444 km of the center of the North Atlantic tropical cyclones (i.e., that reached storm stage and greater) was estimated from passive microwave satellite observations during, an eleven year period. These satellite-observed rainfall estimates were used to assess the impact of tropical cyclone rainfall in altering the geographical, seasonal, and inter-annual distribution of the North Atlantic total rainfall during, June-November when tropical cyclones were most abundant. The main results from this study indicate: 1) that tropical cyclones contribute, respectively, 4%, 3%, and 4% to the western, eastern, and entire North Atlantic; 2) similar to that observed in the North Pacific, the maximum in North Atlantic tropical cyclone rainfall is approximately 5 - 10 deg poleward (depending on longitude) of the maximum non-tropical cyclone rainfall; 3) tropical cyclones contribute regionally a maximum of 30% of the total rainfall 'northeast of Puerto Rico, within a region near 15 deg N 55 deg W, and off the west coast of Africa; 4) there is no lag between the months with maximum tropical cyclone rainfall and non-tropical cyclone rainfall in the western North Atlantic, while in the eastern North Atlantic, maximum tropical cyclone rainfall precedes maximum non-tropical cyclone rainfall; 5) like the North Pacific, North Atlantic tropical cyclones Of hurricane intensity generate the greatest amount of rainfall in the higher latitudes; and 6) warm ENSO events inhibit tropical cyclone rainfall.

Synopsis of timing measurement techniques used in telecommunications

NASA Technical Reports Server (NTRS)

Zampetti, George

1993-01-01

Historically, Maximum Time Interval Error (MTIE) and Maximum Relative Time Interval Error (MRTIE) have been the main measurement techniques used to characterize timing performance in telecommunications networks. Recently, a new measurement technique, Time Variance (TVAR) has gained acceptance in the North American (ANSI) standards body. TVAR was developed in concurrence with NIST to address certain inadequacies in the MTIE approach. The advantages and disadvantages of each of these approaches are described. Real measurement examples are presented to illustrate the critical issues in actual telecommunication applications. Finally, a new MTIE measurement is proposed (ZTIE) that complements TVAR. Together, TVAR and ZTIE provide a very good characterization of network timing.

77 FR 4283 - Information Collection; Submission for OMB Review, Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-27

... obtained by contacting the office listed in the addresses section of this notice. Type of Review: Renewal.... Estimated Total Burden Hours: 200 Total Burden Cost (capital/startup): None. Total Burden Cost (operating...

Publicizing Your Web Resources for Maximum Exposure.

ERIC Educational Resources Information Center

Smith, Kerry J.

2001-01-01

Offers advice to librarians for marketing their Web sites on Internet search engines. Advises against relying solely on spiders and recommends adding metadata to the source code and delivering that information directly to the search engines. Gives an overview of metadata and typical coding for meta tags. Includes Web addresses for a number of…

Automated Network Mapping and Topology Verification

DTIC Science & Technology

2016-06-01

collection of information includes amplifying data about the networked devices such as hardware details, logical addressing schemes, 7 operating ...collection of information, including suggestions for reducing this burden, to Washington headquarters Services, Directorate for Information Operations ...maximum 200 words) The current military reliance on computer networks for operational missions and administrative duties makes network

76 FR 12963 - Request for Information (NOT-ES-11-007): Needs and Approaches for Assessing the Human Health...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-09

... intramural and extramural research efforts that address the combined health effects of multiple environmental... construed as a funding opportunity or grant program. Input from all interested parties is welcome including... program priorities and recommends funding levels to assure maximum utilization of available resources in...

77 FR 63234 - Approval and Promulgation of Implementation Plans; North Carolina 110(a)(1) and (2...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-16

... and 2006 Fine Particulate Matter National Ambient Air Quality Standards AGENCY: Environmental... SIP addresses emissions of particulate matter generally, and does not distinguish between PM 10 and PM 2.5. The Commenter also references the particulate matter maximum emission rates for two coal-fired...

The Contribution of Qualitative Methods for Identifying the Educational Needs of Adults

ERIC Educational Resources Information Center

Boz, Hayat; Dagli, Yakup

2017-01-01

This study addresses the contribution of applying qualitative research methods for identifying the educational activities planned for adults. The paper is based on the experience gained during in-depth interviews with 39 elderly and 33 middle-aged participants, by purposive sampling method and maximum variation technique, within a needs analysis…

Keeping the Language Focus in Content-Based ESL Instruction through Proactive Curriculum-Planning

ERIC Educational Resources Information Center

Bigelow, Martha; Ranney, Susan; Dahlman, Anne

2006-01-01

For content-based instruction (CBI) to work to its maximum potential, a concerted planning effort must be made to address language objectives, combined with effective instructional strategies that target and assess student performance in relation to those objectives. In this article, after considering various models of content-language…

On the Relation between the Linear Factor Model and the Latent Profile Model

ERIC Educational Resources Information Center

Halpin, Peter F.; Dolan, Conor V.; Grasman, Raoul P. P. P.; De Boeck, Paul

2011-01-01

The relationship between linear factor models and latent profile models is addressed within the context of maximum likelihood estimation based on the joint distribution of the manifest variables. Although the two models are well known to imply equivalent covariance decompositions, in general they do not yield equivalent estimates of the…

78 FR 69614 - Home Improvements and Structural Alterations (HISA) Benefits Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-20

... proposes new practices and policies related to the HISA benefits program and, therefore, this proposed rule... for construction projects. In practice, it is not uncommon for bids to come in at or above the maximum... currently administered, we do not further address current practice in this rulemaking. 17.3100 Purpose and...

A New Low-frequency Sonophoresis System Combined with Ultrasonic Motor and Transducer

NASA Astrophysics Data System (ADS)

Zhu, Pancheng; Peng, Hanmin; Yang, Jianzhi; Mao, Ting; Sheng, Juan

2018-03-01

Low frequency sonophoresis (LFS) is currently being attempted as a transdermal drug delivery method in clinical areas. However, it lacks both an effective control method and the equipment to satisfy the varying drug dosage requirements of individual patients. Herein, a novel method aimed at controlling permeability is proposed and developed, using a pressure control strategy which is based on an accurate, adjustable and non-invasive ultrasound transdermal drug delivery system in in vitro LFS. The system mainly consists of a lead screw linear ultrasonic motor and an ultrasonic transducer, in which the former offers pressure and the latter provides ultrasound wave in the liquid. The ultrasound can enhance non-invasive permeation and the pressure from the motor can control the permeability. The calculated and experimental results demonstrate that the maximum pressure on artificial skin is under the area with the maximum vibration amplitude of the ultrasonic transducer, and the total pressure consists of acoustic pressure from the transducer and approximate static pressure from the motor. Changing the static pressure from the ultrasonic motor can effectively control the non-invasive permeability, by adjusting the duty ratio or the amplitude of the motor’s driving voltage. In addition, the permeability control of calcein by thrust control is realized in 15 min, indicating the suitability of this method for application in accurate medical technology. The obtained results reveal that the issue of difficult permeability control can be addressed, using this control method in in vitro LFS to open up a route to the design of accurate drug delivery technology for individual patients.

Which factors influence patients' maximum acceptable waiting time for cataract surgery? - a questionnaire survey.

PubMed

Weingessel, Birgit; Richter-Mueksch, Sibylla; Vécsei-Marlovits, Pia V

2011-05-01

To evaluate patients’ maximum acceptable waiting time (MAWT) and to assess the determinants of patient perceptions of MAWT. A total of 500 consecutive patients with cataract were asked to fill out a preoperative questionnaire, addressing patients’ MAWT to undergo cataract surgery. Patients’ visual impairment (VF-14 score), education, profession and social status were evaluated, and an ophthalmologic examination was performed. Univariate analysis included Spearman’s correlation test, unpaired Student’s t-test and the Mann–Whitney U test. Univariate and multivariate associations were calculated using unconditional logistic regression. The mean MAWT was 3.17 ± 2.12 months. The mean VF-14 score was 72.10 ± 22.54. Between VF-14 score and MAWT, there was a significant correlation (r = 0.180, p = 0.004). Patients with higher education (high school, university) accepted significantly longer MAWT (3.92 ± 2.38 months versus 3.02 ± 2.00 months, p = 0.009). Patients who had self-noticed visual impairment were nearly four times (OR: 3.88, 95% CI = 2.07–7.28, p < 0.001) more likely to accept only MAWT of <3 months. Patients with low tolerance for waiting had greater self-reported difficulty with vision. Patients’ acceptance of waiting was not associated with clinical visual acuity measures. Education, ability to work, living independently and taking care of dependents were also strong predictors from patients’ perspective. Considering the implementation of standards for waiting lists, these facts should be taken into account. © 2010 The Authors. Journal compilation © 2010 Acta Ophthalmol.

Spatio-temporal Trends of Climate Variability in North Carolina

NASA Astrophysics Data System (ADS)

Sayemuzzaman, Mohammad

Climatic trends in spatial and temporal variability of maximum temperature (Tmax), minimum temperature (Tmin), mean temperature (Tmean) and precipitation were evaluated for 249 ground-based stations in North Carolina for 1950-2009. The Mann-Kendall (MK), the Theil-Sen Approach (TSA) and the Sequential Mann-Kendall (SQMK) tests were applied to quantify the significance of trend, magnitude of trend and the trend shift, respectively. The lag-1 serial correlation and double mass curve techniques were used to address the data independency and homogeneity. The pre-whitening technique was used to eliminate the effect of auto correlation of the data series. The difference between minimum and maximum temperatures, and so the diurnal temperature range (DTR), at some stations was found to be decreasing on both an annual and a seasonal basis, with an overall increasing trend in the mean temperature. For precipitation, a statewide increasing trend in fall (highest in November) and decreasing trend in winter (highest in February) were detected. No pronounced increasing/decreasing trends were detected in annual, spring, and summer precipitation time series. Trend analysis on a spatial scale (for three physiographic regions: mountain, piedmont and coastal) revealed mixed results. Coastal zone exhibited increasing mean temperature (warming) trend as compared to other locations whereas mountain zone showed decreasing trend (cooling). Three main moisture components (precipitation, total cloud cover, and soil moisture) and the two major atmospheric circulation modes (North Atlantic Oscillation and Southern Oscillation) were used for correlative analysis purposes with the temperature (specifically with DTR) and precipitation trends. It appears that the moisture components are associated with DTR more than the circulation modes in North Carolina.

Radiation-hardened backside-illuminated 512 x 512 charge-coupled device

NASA Astrophysics Data System (ADS)

Bates, Philip A.; Levine, Peter A.; Sauer, Donald J.; Hsueh, Fu-Lung; Shallcross, Frank V.; Smeltzer, Ronald K.; Meray, Grazyna M.; Taylor, Gordon C.; Tower, John R.

1995-04-01

A four-port 512 X 512 charge coupled device (CCD) imager hardened against proton displacement damage and total dose degradation has been fabricated and tested. The device is based upon an established thinned, backside illuminated, triple polysilicon, buried channel CCD process technology. The technology includes buried blooming drains. A three step approach has been taken to hardening the device. The first phase addressed hardening against proton displacement damage. The second phase addressed hardening against both proton displacement damage and total dose degradation. The third phase addresses final optimization of the design. Test results from the first and second phase efforts are presented. Plans for the third phase are discussed.

Indirect addressing and load balancing for faster solution to Mandelbrot Set on SIMD architectures

NASA Technical Reports Server (NTRS)

Tomboulian, Sherryl

1989-01-01

SIMD computers with local indirect addressing allow programs to have queues and buffers, making certain kinds of problems much more efficient. Examined here are a class of problems characterized by computations on data points where the computation is identical, but the convergence rate is data dependent. Normally, in this situation, the algorithm time is governed by the maximum number of iterations required by each point. Using indirect addressing allows a processor to proceed to the next data point when it is done, reducing the overall number of iterations required to approach the mean convergence rate when a sufficiently large problem set is solved. Load balancing techniques can be applied for additional performance improvement. Simulations of this technique applied to solving Mandelbrot Sets indicate significant performance gains.

The maximum percentage of fly ash to replace part of original Portland cement (OPC) in producing high strength concrete

NASA Astrophysics Data System (ADS)

Mallisa, Harun; Turuallo, Gidion

2017-11-01

This research investigates the maximum percent of fly ash to replace part of Orginal Portland Cement (OPC) in producing high strength concrete. Many researchers have found that the incorporation of industrial by-products such as fly ash as in producing concrete can improve properties in both fresh and hardened state of concrete. The water-binder ratio was used 0.30. The used sand was medium sand with the maximum size of coarse aggregate was 20 mm. The cement was Type I, which was Bosowa Cement produced by PT Bosowa. The percentages of fly ash to the total of a binder, which were used in this research, were 0, 10, 15, 20, 25 and 30%; while the super platicizer used was typed Naptha 511P. The results showed that the replacement cement up to 25 % of the total weight of binder resulted compressive strength higher than the minimum strength at one day of high-strength concrete.

Levels of total mercury in marine organisms from Adriatic Sea, Italy.

PubMed

Perugini, Monia; Visciano, Pierina; Manera, Maurizio; Zaccaroni, Annalisa; Olivieri, Vincenzo; Amorena, Michele

2009-08-01

The presence of total mercury in fish, crustacean and cephalopod from Adriatic Sea, was investigated. The highest concentrations were observed in decreasing order in: Norway lobster (0.97 +/- 0.24 mg/kg; mean +/- SE), European hake (0.59 +/- 0.14 mg/kg), red mullet (0.48 +/- 0.09 mg/kg), blue whiting (0.38 +/- 0.09 mg/kg), Atlantic mackerel (0.36 +/- 0.08 mg/kg) and European flying squid (0.25 +/- 0.03 mg/kg). A significant difference (p < 0.01) was found between the levels of total mercury in Norway lobster and those detected in all other species. The 25% of all samples exceeded the maximum limit fixed by Commission Regulation (EC) No 1881/2006. The results show that fish and fishery products can exceed the maximum levels and stress the need of more information for consumers in particular for people that eat large amount of fish.

Estimation of the Total Atmospheric Water Vapor Content and Land Surface Temperature Based on AATSR Thermal Data

PubMed Central

Zhang, Tangtang; Wen, Jun; van der Velde, Rogier; Meng, Xianhong; Li, Zhenchao; Liu, Yuanyong; Liu, Rong

2008-01-01

The total atmospheric water vapor content (TAWV) and land surface temperature (LST) play important roles in meteorology, hydrology, ecology and some other disciplines. In this paper, the ENVISAT/AATSR (The Advanced Along-Track Scanning Radiometer) thermal data are used to estimate the TAWV and LST over the Loess Plateau in China by using a practical split window algorithm. The distribution of the TAWV is accord with that of the MODIS TAWV products, which indicates that the estimation of the total atmospheric water vapor content is reliable. Validations of the LST by comparing with the ground measurements indicate that the maximum absolute derivation, the maximum relative error and the average relative error is 4.0K, 11.8% and 5.0% respectively, which shows that the retrievals are believable; this algorithm can provide a new way to estimate the LST from AATSR data. PMID:27879795

Effect of Vacuum Frying on Changes in Quality Attributes of Jackfruit (Artocarpus heterophyllus) Bulb Slices.

PubMed

Maity, Tanushree; Bawa, A S; Raju, P S

2014-01-01

The effect of frying temperatures and durations on the quality of vacuum fried jackfruit (JF) chips was evaluated. Moisture content and breaking force of JF chips decreased with increase in frying temperature and time during vacuum frying whereas the oil content increased. The frying time for JF chips was found to be 30, 25, and 20 minutes at 80, 90, and 100°C, respectively. JF chips fried at higher temperature resulted in maximum shrinkage (48%). The lightness in terms of hunter L (*) value decreased significantly (P < 0.05) during frying. Sensory evaluation showed maximum acceptability for JF chips fried at 90°C for 25 min. Frying under vacuum at lower temperatures was found to retain bioactive compounds such as total phenolics, total flavonoids, and total carotenoids in JF chips. Almost 90% of carotenoids were lost from the samples after 30 min of frying at 100°C.

40 CFR 418.13 - Effluent limitations and guidelines representing the degree of effluent reduction attained by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed— Total phosphorus... exceed— Total phosphorus (as P) 105 35 Fluoride 75 25 [39 FR 12836, Apr. 8, 1974, as amended at 41 FR...

40 CFR 418.13 - Effluent limitations and guidelines representing the degree of effluent reduction attained by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed— Total phosphorus... exceed— Total phosphorus (as P) 105 35 Fluoride 75 25 [39 FR 12836, Apr. 8, 1974, as amended at 41 FR...

40 CFR Table 4 to Subpart Ggg of... - Monitoring Requirements for Control Devices a

Code of Federal Regulations, 2014 CFR

2014-07-01

... (regenerative) Stream flow monitoring device, and 1. Total regeneration stream mass or volumetric flow during carbon bed regeneration cycle(s) 1. For each regeneration cycle, record the total regeneration stream... regeneration 2. For each regeneration cycle, record the maximum carbon bed-temperature. 3. Temperature of...

40 CFR Table 4 to Subpart Ggg of... - Monitoring Requirements for Control Devices a

Code of Federal Regulations, 2013 CFR

2013-07-01

... (regenerative) Stream flow monitoring device, and 1. Total regeneration stream mass or volumetric flow during carbon bed regeneration cycle(s) 1. For each regeneration cycle, record the total regeneration stream... regeneration 2. For each regeneration cycle, record the maximum carbon bed-temperature. 3. Temperature of...

7 CFR 3550.63 - Maximum loan amount.

Code of Federal Regulations, 2010 CFR

2010-01-01

... self-help housing will be calculated by adding the total of the market value of the lot (including... amount. Total secured indebtedness must not exceed the area loan limit or market value limitations... appraisal, tax monitoring fee, and the charge to establish an escrow account for taxes and insurance will...

7 CFR 3550.63 - Maximum loan amount.

Code of Federal Regulations, 2013 CFR

2013-01-01

... self-help housing will be calculated by adding the total of the market value of the lot (including... amount. Total secured indebtedness must not exceed the area loan limit or market value limitations... appraisal, tax monitoring fee, and the charge to establish an escrow account for taxes and insurance will...

7 CFR 3550.63 - Maximum loan amount.

Code of Federal Regulations, 2012 CFR

2012-01-01

... self-help housing will be calculated by adding the total of the market value of the lot (including... amount. Total secured indebtedness must not exceed the area loan limit or market value limitations... appraisal, tax monitoring fee, and the charge to establish an escrow account for taxes and insurance will...

7 CFR 3550.63 - Maximum loan amount.

Code of Federal Regulations, 2011 CFR

2011-01-01

... self-help housing will be calculated by adding the total of the market value of the lot (including... amount. Total secured indebtedness must not exceed the area loan limit or market value limitations... appraisal, tax monitoring fee, and the charge to establish an escrow account for taxes and insurance will...

7 CFR 3550.63 - Maximum loan amount.

Code of Federal Regulations, 2014 CFR

2014-01-01

... self-help housing will be calculated by adding the total of the market value of the lot (including... amount. Total secured indebtedness must not exceed the area loan limit or market value limitations... appraisal, tax monitoring fee, and the charge to establish an escrow account for taxes and insurance will...

40 CFR 142.60 - Variances from the maximum contaminant level for total trihalomethanes.

Code of Federal Regulations, 2010 CFR

2010-07-01

... level for total trihalomethanes. 142.60 Section 142.60 Protection of Environment ENVIRONMENTAL... IMPLEMENTATION Identification of Best Technology, Treatment Techniques or Other Means Generally Available § 142..., pursuant to section 1415(a)(1)(A) of the Act, hereby identifies the following as the best technology...

50 CFR 14.161 - Primary enclosures.

Code of Federal Regulations, 2013 CFR

2013-10-01

... the total surface area of each ventilated wall. When openings are located on all four walls of the enclosure, the openings shall comprise at least 8 percent of the total surface area of each wall. At least... specifies maximum densities minimum space for transporting rodents that fall within the specified weight...

50 CFR 14.161 - Primary enclosures.

Code of Federal Regulations, 2011 CFR

2011-10-01

... the total surface area of each ventilated wall. When openings are located on all four walls of the enclosure, the openings shall comprise at least 8 percent of the total surface area of each wall. At least... specifies maximum densities minimum space for transporting rodents that fall within the specified weight...

50 CFR 14.161 - Primary enclosures.

Code of Federal Regulations, 2012 CFR

2012-10-01

... the total surface area of each ventilated wall. When openings are located on all four walls of the enclosure, the openings shall comprise at least 8 percent of the total surface area of each wall. At least... specifies maximum densities minimum space for transporting rodents that fall within the specified weight...

20 CFR 404.403 - Reduction where total monthly benefits exceed maximum family benefits payable.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... This causes a reduction in the benefit to child one to 0.00 and the benefit to child two to $30.00... is entitled to $280.00 monthly. This causes a reduction in the benefit to child one to $0.00 and the... and child are entitled to benefits. The wage earner's primary insurance amount is $600.00. His maximum...

Determining the optimal load for jump squats: a review of methods and calculations.

PubMed

Dugan, Eric L; Doyle, Tim L A; Humphries, Brendan; Hasson, Christopher J; Newton, Robert U

2004-08-01

There has been an increasing volume of research focused on the load that elicits maximum power output during jump squats. Because of a lack of standardization for data collection and analysis protocols, results of much of this research are contradictory. The purpose of this paper is to examine why differing methods of data collection and analysis can lead to conflicting results for maximum power and associated optimal load. Six topics relevant to measurement and reporting of maximum power and optimal load are addressed: (a) data collection equipment, (b) inclusion or exclusion of body weight force in calculations of power, (c) free weight versus Smith machine jump squats, (d) reporting of average versus peak power, (e) reporting of load intensity, and (f) instructions given to athletes/ participants. Based on this information, a standardized protocol for data collection and reporting of jump squat power and optimal load is presented.

Spacecraft Maximum Allowable Concentrations for Selected Airborne Contaminants. Volume 5

NASA Technical Reports Server (NTRS)

2008-01-01

To protect space crews from air contaminants, NASA requested that the National Research Council (NRC) provide guidance for developing spacecraft maximum allowable concentrations (SMACs) and review NASA's development of exposure guidelines for specific chemicals. The NRC convened the Committee on Spacecraft Exposure Guidelines to address this task. The committee published Guidelines for Developing Spacecraft Maximum Allowable Concentrations for Space Station Contaminants (NRC 1992). The reason for the review of chemicals in Volume 5 is that many of them have not been examined for more than 10 years, and new research necessitates examining the documents to ensure that they reflect current knowledge. New knowledge can be in the form of toxicologic data or in the application of new approaches for analysis of available data. In addition, because NASA anticipates longer space missions beyond low Earth orbit, SMACs for 1,000-d exposures have also been developed.

Muscular Strength Is Associated with Higher Intraocular Pressure in Physically Active Males.

PubMed

Vera, Jesús; Jiménez, Raimundo; García-Ramos, Amador; Cárdenas, David

2018-02-01

The positive association between intraocular pressure (IOP) and relative maximum force may have relevance for exercise recommendations when IOP is a concern. The relationship between exercise and IOP has been approached in several studies. However, the influence of muscle function on IOP remains underexplored. This study aimed to determine the relationship between the maximal mechanical capabilities of muscles to generate force, velocity, and power with IOP. Sixty-five physically active males participated in this cross-sectional study. Baseline IOP measures were obtained by rebound tonometry, and participants performed an incremental loading test in the ballistic bench press. Baseline IOP showed a strong positive correlation with relative maximum force (r65 = 0.85, P < .001) relative maximum power (r65 = 0.85, P < .001), and relative one-repetition maximum (r65 = 0.91, P < .001). Also, a moderate positive association was obtained between baseline IOP and maximum force (r65 = 0.74, P < .001), maximum power (r65 = 0.72, P < .001), and maximum dynamic strength (r65 = 0.80, P < .001). No significant correlations between IOP and maximal velocity were obtained (all P > .05). There is a positive association between greater upper-body power and strength with higher baseline IOP, which might have important implications in the management of ocular health and especially in individuals constantly involved in resistance training programs (e.g., military personnel, weightlifters). The possible protective effect of high fitness level on the acute IOP response to strength exercise needs to be addressed in future studies.

The biomechanics of running in athletes with previous hamstring injury: A case-control study.

PubMed

Daly, C; Persson, U McCarthy; Twycross-Lewis, R; Woledge, R C; Morrissey, D

2016-04-01

Hamstring injury is prevalent with persistently high reinjury rates. We aim to inform hamstring rehabilitation by exploring the electromyographic and kinematic characteristics of running in athletes with previous hamstring injury. Nine elite male Gaelic games athletes who had returned to sport after hamstring injury and eight closely matched controls sprinted while lower limb kinematics and muscle activity of the previously injured biceps femoris, bilateral gluteus maximus, lumbar erector spinae, rectus femoris, and external oblique were recorded. Intergroup comparisons of muscle activation ratios and kinematics were performed. Previously injured athletes demonstrated significantly reduced biceps femoris muscle activation ratios with respect to ipsilateral gluteus maximus (maximum difference -12.5%, P = 0.03), ipsilateral erector spinae (maximum difference -12.5%, P = 0.01), ipsilateral external oblique (maximum difference -23%, P = 0.01), and contralateral rectus femoris (maximum difference -22%, P = 0.02) in the late swing phase. We also detected sagittal asymmetry in hip flexion (maximum 8°, P = 0.01), pelvic tilt (maximum 4°, P = 0.02), and medial rotation of the knee (maximum 6°, P = 0.03) effectively putting the hamstrings in a lengthened position just before heel strike. Previous hamstring injury is associated with altered biceps femoris associated muscle activity and potentially injurious kinematics. These deficits should be considered and addressed during rehabilitation. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The effect of substrate, season, and agroecological zone on mycoflora and aflatoxin contamination of poultry feed from Khyber Pakhtunkhwa, Pakistan.

PubMed

Alam, Sahib; Shah, Hamid Ullah; Khan, Habibullah; Magan, Naresh

2012-10-01

To study the effects of and interactions among feed types, seasons, and agroecological zones on the total fungal viable count and aflatoxins B1 (AFB1), B2 (AFB2), G1 (AFG1), and G2 (AFG2) production in poultry feed, an experiment was conducted using three-factorial design. A total of 216 samples of poultry feed ingredients, viz. maize, wheat, rice, cotton seed meal (CSM), and finished products, that is, starter and finisher broilers' rations, were collected from Peshawar, Swat, and D. I. Khan districts of Khyber Pakhtunkhwa, Pakistan, during the winter, spring, summer, and autumn seasons of the year 2007/2008. Analysis of variance showed that there was a complex interaction among all these factors and that this influenced the total fungal viable count and relative concentrations of the aflatoxins produced. Minimum total culturable fungi (6.43 × 10³ CFUs/g) were counted in CSM from D. I. Khan region in winter season while maximum (26.68 × 10³ CFUs/g) in starter ration from Peshawar region in summer. Maximum concentrations of AFB1 (191.65 ng/g), AFB2 (86.85 ng/g), and AFG2 (89.90 ng/g) were examined during the summer season whereas the concentration of AFG1 was maximum (167.82 ng/g) in autumn in finisher ration from Peshawar region. Minimum aflatoxins were produced in the winter season across all the three agroecological zones.

Dosimetric Evaluation Between Megavoltage Cone-Beam Computed Tomography and Body Mass Index for Intracranial, Thoracic, and Pelvic Localization

DOE Office of Scientific and Technical Information (OSTI.GOV)

VanAntwerp, April E.; Raymond, Sarah M., E-mail: raymons9@ccf.org; Addington, Mark C.

2011-10-01

The aim of this study was to evaluate radiation dose for organs at risk (OAR) within the cranium, thorax, and pelvis from megavoltage cone-beam computed tomography (MV-CBCT). Using a clinical treatment planning system, CBCT doses were calculated from 60 patient datasets using 27.4 x 27.4 cm{sup 2} field size and 200{sup o} arc length. The body mass indices (BMIs) for these patients range from 17.2-48.4 kg/m{sup 2}. A total of 60 CBCT plans were created and calculated with heterogeneity corrections, with monitor units (MU) that varied from 8, 4, and 2 MU per plan. The isocenters of these plans weremore » placed at defined anatomical structures. The maximum dose, dose to the isocenter, and mean dose to the selected critical organs were analyzed. The study found that maximum and isocenter doses were weakly associated with BMI, but linearly associated with the total MU. Average maximum/isocenter doses in the cranium were 10.0 ({+-} 0.18)/7.0 ({+-} 0.08) cGy, 5.0 ({+-} 0.09)/3.5 ({+-} 0.05) cGy, and 2.5 ({+-} .04)/1.8 ({+-} 0.05) cGy for 8, 4, and 2 MU, respectively. Similar trends but slightly larger maximum/isocenter doses were found in the thoracic and pelvic regions. For the cranial region, the average mean doses with a total of 8 MU to the eye, lens, and brain were 9.7 ({+-} 0.12) cGy, 9.1 ({+-} 0.16) cGy, and 7.2 ({+-} 0.10) cGy, respectively. For the thoracic region, the average mean doses to the lung, heart, and spinal cord were 6.6 ({+-} 0.05) cGy, 6.9 ({+-} 1.2) cGy, and 4.7 ({+-} 0.8) cGy, respectively. For the pelvic region, the average mean dose to the femoral heads was 6.4 ({+-} 1.1) cGy. The MV-CBCT doses were linearly associated with the total MU but weakly dependent on patients' BMIs. Daily MV-CBCT has a cumulative effect on the total body dose and critical organs, which should be carefully considered for clinical impacts.« less

Lighting Condition Analysis for Mars Moon Phobos

NASA Technical Reports Server (NTRS)

Li, Zu Qun; Crues, Edwin Z.; Bielski, Paul; De Carufel, Guy

2016-01-01

A manned mission to Phobos may be an important precursor and catalyst for the human exploration of Mars, as it will fully demonstrate the technologies for a successful Mars mission. A comprehensive understanding of Phobos' environment such as lighting condition and gravitational acceleration are essential to the mission success. The lighting condition is one of many critical factors for landing zone selection, vehicle power subsystem design, and surface mobility vehicle path planning. Due to the orbital characteristic of Phobos, the lighting condition will change dramatically from one Martian season to another. This study uses high fidelity computer simulation to investigate the lighting conditions, specifically the solar radiation flux over the surface, on Phobos. Ephemeris data from the Jet Propulsion Laboratory (JPL) DE405 model was used to model the state of the Sun, the Earth, and Mars. An occultation model was developed to simulate Phobos' self-shadowing and its solar eclipses by Mars. The propagated Phobos' state was compared with data from JPL's Horizon system to ensure the accuracy of the result. Results for Phobos lighting condition over one Martian year are presented in this paper, which include length of solar eclipse, average solar radiation intensity, surface exposure time, total maximum solar energy, and total surface solar energy (constrained by incident angle). The results show that Phobos' solar eclipse time changes throughout the Martian year with the maximum eclipse time occurring during the Martian spring and fall equinox and no solar eclipse during the Martian summer and winter solstice. Solar radiation intensity is close to minimum at the summer solstice and close to maximum at the winter solstice. Total surface exposure time is longer near the north pole and around the anti- Mars point. Total maximum solar energy is larger around the anti-Mars point. Total surface solar energy is higher around the anti-Mars point near the equator. The results from this study and others like it will be important in determining landing site selection, vehicle system design and mission operations for the human exploration of Phobos and subsequently Mars.

The consequences of balanced harvesting of fish communities

PubMed Central

Jacobsen, Nis S.; Gislason, Henrik; Andersen, Ken H.

2014-01-01

Balanced harvesting, where species or individuals are exploited in accordance with their productivity, has been proposed as a way to minimize the effects of fishing on marine fish communities and ecosystems. This calls for a thorough examination of the consequences balanced harvesting has on fish community structure and yield. We use a size- and trait-based model that resolves individual interactions through competition and predation to compare balanced harvesting with traditional selective harvesting, which protects juvenile fish from fishing. Four different exploitation patterns, generated by combining selective or unselective harvesting with balanced or unbalanced fishing, are compared. We find that unselective balanced fishing, where individuals are exploited in proportion to their productivity, produces a slightly larger total maximum sustainable yield than the other exploitation patterns and, for a given yield, the least change in the relative biomass composition of the fish community. Because fishing reduces competition, predation and cannibalism within the community, the total maximum sustainable yield is achieved at high exploitation rates. The yield from unselective balanced fishing is dominated by small individuals, whereas selective fishing produces a much higher proportion of large individuals in the yield. Although unselective balanced fishing is predicted to produce the highest total maximum sustainable yield and the lowest impact on trophic structure, it is effectively a fishery predominantly targeting small forage fish. PMID:24307676

Developing Empirical Lightning Cessation Forecast Guidance for the Cape Canaveral Air Force Station and Kennedy Space Center

NASA Technical Reports Server (NTRS)

Stano, Geoffrey T.; Fuelberg, Henry E.; Roeder, William P.

2010-01-01

This research addresses the 45th Weather Squadron's (45WS) need for improved guidance regarding lightning cessation at Cape Canaveral Air Force Station and Kennedy Space Center (KSC). KSC's Lightning Detection and Ranging (LDAR) network was the primary observational tool to investigate both cloud-to-ground and intracloud lightning. Five statistical and empirical schemes were created from LDAR, sounding, and radar parameters derived from 116 storms. Four of the five schemes were unsuitable for operational use since lightning advisories would be canceled prematurely, leading to safety risks to personnel. These include a correlation and regression tree analysis, three variants of multiple linear regression, event time trending, and the time delay between the greatest height of the maximum dBZ value to the last flash. These schemes failed to adequately forecast the maximum interval, the greatest time between any two flashes in the storm. The majority of storms had a maximum interval less than 10 min, which biased the schemes toward small values. Success was achieved with the percentile method (PM) by separating the maximum interval into percentiles for the 100 dependent storms.

[Estimation of Maximum Entrance Skin Dose during Cerebral Angiography].

PubMed

Kawauchi, Satoru; Moritake, Takashi; Hayakawa, Mikito; Hamada, Yusuke; Sakuma, Hideyuki; Yoda, Shogo; Satoh, Masayuki; Sun, Lue; Koguchi, Yasuhiro; Akahane, Keiichi; Chida, Koichi; Matsumaru, Yuji

2015-09-01

Using radio-photoluminescence glass dosimeter, we measured the entrance skin dose (ESD) in 46 cases and analyzed the correlations between maximum ESD and angiographic parameters [total fluoroscopic time (TFT); number of digital subtraction angiography (DSA) frames, air kerma at the interventional reference point (AK), and dose-area product (DAP)] to estimate the maximum ESD in real time. Mean (± standard deviation) maximum ESD, dose of the right lens, and dose of the left lens were 431.2 ± 135.8 mGy, 33.6 ± 15.5 mGy, and 58.5 ± 35.0 mGy, respectively. Correlation coefficients (r) between maximum ESD and TFT, number of DSA frames, AK, and DAP were r=0.379 (P<0.01), r=0.702 (P<0.001), r=0.825 (P<0.001), and r=0.709 (P<0.001), respectively. AK was identified as the most useful parameter for real-time prediction of maximum ESD. This study should contribute to the development of new diagnostic reference levels in our country.

Heavy resistance training and peri-exercise ingestion of a multi-ingredient ergogenic nutritional supplement in males: effects on body composition, muscle performance and markers of muscle protein synthesis.

PubMed

Spillane, Mike; Schwarz, Neil; Willoughby, Darryn S

2014-12-01

This study determined the effects of heavy resistance training and peri-exercise ergogenic multi-ingredient nutritional supplement ingestion on blood and skeletal markers of muscle protein synthesis (MPS), body composition, and muscle performance. Twenty-four college-age males were randomly assigned to either a multi-ingredient SizeOn Maximum Performance (SIZE) or protein/carbohydrate/creatine (PCC) comparator supplement group in a double-blind fashion. Body composition and muscle performance were assessed, and venous blood samples and muscle biopsies were obtained before and after 6 weeks of resistance training and supplementation. Data were analyzed by 2-way ANOVA (p ≤ 0.05). Total body mass, body water, and fat mass were not differentially affected (p > 0.05). However, fat-free mass was significantly increased in both groups in response to resistance training (p = 0.037). Lower-body muscle strength (p = 0.029) and endurance (p = 0.027) were significantly increased with resistance training, but not supplementation (p > 0.05). Serum insulin, IGF-1, GH, and cortisol were not differentially affected (p > 0.05). Muscle creatine content was significantly increased in both groups from supplementation (p = 0.044). Total muscle protein (p = 0.038), MHC 1 (p = 0.041), MHC 2A, (p = 0.029), total IRS- (p = 0.041), and total Akt (p = 0.011) were increased from resistance training, but not supplementation. In response to heavy resistance training when compared to PCC, the peri-exercise ingestion of SIZE did not preferentially improve body composition, muscle performance, and markers indicative of MPS. Key pointsIn response to 42 days of heavy resistance training and either SizeOn Maximum Performance or protein/carbohydrate/creatine supplementation, similar increases in muscle mass and strength in both groups occurred; however, the increases were not different between supplement groups.The supplementation of SizeOn Maximum Performance had no preferential effect on augmenting serum insulin, IGF-1, and GH, or in decreasing cortisol.While resistance training was effective in increasing total creatine content in skeletal muscle, myofibrillar protein, and the content of total IRS-1 and Akt, it was not preferentially due to SizeOn Maximum Performance supplementation.At the daily dose of 50 g, SizeOn Maximum Performance supplementation for 42 days combined with resistance training does not increases muscle mass and strength due to its ability to elevate serum hormones and growth factors or in its ability to augment skeletal muscle signaling pathway markers indicative of muscle protein synthesis when compared to an equivalent daily dose of protein/carbohydrate/creatine.

Changing climate and endangered high mountain ecosystems in Colombia.

PubMed

Ruiz, Daniel; Moreno, Hernán Alonso; Gutiérrez, María Elena; Zapata, Paula Andrea

2008-07-15

High mountain ecosystems are among the most sensitive environments to changes in climatic conditions occurring on global, regional and local scales. The article describes the changing conditions observed over recent years in the high mountain basin of the Claro River, on the west flank of the Colombian Andean Central mountain range. Local ground truth data gathered at 4150 m, regional data available at nearby weather stations, and satellite info were used to analyze changes in the mean and the variance, and significant trends in climatic time series. Records included minimum, mean and maximum temperatures, relative humidity, rainfall, sunshine, and cloud characteristics. In high levels, minimum and maximum temperatures during the coldest days increased at a rate of about 0.6 degrees C/decade, whereas maximum temperatures during the warmest days increased at a rate of about 1.3 degrees C/decade. Rates of increase in maximum, mean and minimum diurnal temperature range reached 0.6, 0.7, and 0.5 degrees C/decade. Maximum, mean and minimum relative humidity records showed reductions of about 1.8, 3.9 and 6.6%/decade. The total number of sunny days per month increased in almost 2.1 days. The headwaters exhibited no changes in rainfall totals, but evidenced an increased occurrence of unusually heavy rainfall events. Reductions in the amount of all cloud types over the area reached 1.9%/decade. In low levels changes in mean monthly temperatures and monthly rainfall totals exceeded + 0.2 degrees C and - 4% per decade, respectively. These striking changes might have contributed to the retreat of glacier icecaps and to the disappearance of high altitude water bodies, as well as to the occurrence and rapid spread of natural and man-induced forest fires. Significant reductions in water supply, important disruptions of the integrity of high mountain ecosystems, and dramatic losses of biodiversity are now a steady menu of the severe climatic conditions experienced by these fragile tropical environments.

Flight-Path Characteristics for Decelerating From Supercircular Speed

NASA Technical Reports Server (NTRS)

Luidens, Roger W.

1961-01-01

Characteristics of the following six flight paths for decelerating from a supercircular speed are developed in closed form: constant angle of attack, constant net acceleration, constant altitude" constant free-stream Reynolds number, and "modulated roll." The vehicles were required to remain in or near the atmosphere, and to stay within the aerodynamic capabilities of a vehicle with a maximum lift-drag ratio of 1.0 and within a maximum net acceleration G of 10 g's. The local Reynolds number for all the flight paths for a vehicle with a gross weight of 10,000 pounds and a 600 swept wing was found to be about 0.7 x 10(exp 6). With the assumption of a laminar boundary layer, the heating of the vehicle is studied as a function of type of flight path, initial G load, and initial velocity. The following heating parameters were considered: the distribution of the heating rate over the vehicle, the distribution of the heat per square foot over the vehicle, and the total heat input to the vehicle. The constant G load path at limiting G was found to give the lowest total heat input for a given initial velocity. For a vehicle with a maximum lift-drag ratio of 1.0 and a flight path with a maximum G of 10 g's, entry velocities of twice circular appear thermo- dynamically feasible, and entries at velocities of 2.8 times circular are aerodynamically possible. The predominant heating (about 85 percent) occurs at the leading edge of the vehicle. The total ablated weight for a 10,000-pound-gross-weight vehicle decelerating from an initial velocity of twice circular velocity is estimated to be 5 percent of gross weight. Modifying the constant G load flight path by a constant-angle-of-attack segment through a flight- to circular-velocity ratio of 1.0 gives essentially a "point landing" capability but also results in an increased total heat input to the vehicle.

Solitary pulmonary nodules: Comparison of dynamic first-pass contrast-enhanced perfusion area-detector CT, dynamic first-pass contrast-enhanced MR imaging, and FDG PET/CT.

PubMed

Ohno, Yoshiharu; Nishio, Mizuho; Koyama, Hisanobu; Seki, Shinichiro; Tsubakimoto, Maho; Fujisawa, Yasuko; Yoshikawa, Takeshi; Matsumoto, Sumiaki; Sugimura, Kazuro

2015-02-01

To prospectively compare the capabilities of dynamic perfusion area-detector computed tomography (CT), dynamic magnetic resonance (MR) imaging, and positron emission tomography (PET) combined with CT (PET/CT) with use of fluorine 18 fluorodeoxyglucose (FDG) for the diagnosis of solitary pulmonary nodules. The institutional review board approved this study, and written informed consent was obtained from each subject. A total of 198 consecutive patients with 218 nodules prospectively underwent dynamic perfusion area-detector CT, dynamic MR imaging, FDG PET/CT, and microbacterial and/or pathologic examinations. Nodules were classified into three groups: malignant nodules (n = 133) and benign nodules with low (n = 53) or high (n = 32) biologic activity. Total perfusion was determined with dual-input maximum slope models at area-detector CT, maximum and slope of enhancement ratio at MR imaging, and maximum standardized uptake value (SUVmax) at PET/CT. Next, all indexes for malignant and benign nodules were compared with the Tukey honest significant difference test. Then, receiver operating characteristic analysis was performed for each index. Finally, sensitivity, specificity, and accuracy were compared with the McNemar test. All indexes showed significant differences between malignant nodules and benign nodules with low biologic activity (P < .0001). The area under the receiver operating characteristic curve for total perfusion was significantly larger than that for other indexes (.0006 ≤ P ≤ .04). The specificity and accuracy of total perfusion were significantly higher than those of maximum relative enhancement ratio (specificity, P < .0001; accuracy, P < .0001), slope of enhancement ratio (specificity, P < .0001; accuracy, P < .0001), and SUVmax (specificity, P < .0001; accuracy, P < .0001). Dynamic perfusion area-detector CT is more specific and accurate than dynamic MR imaging and FDG PET/CT in the diagnosis of solitary pulmonary nodules in routine clinical practice. © RSNA, 2014.

An analysis of collegiate band directors' exposure to sound pressure levels

NASA Astrophysics Data System (ADS)

Roebuck, Nikole Moore

Noise-induced hearing loss (NIHL) is a significant but unfortunate common occupational hazard. The purpose of the current study was to measure the magnitude of sound pressure levels generated within a collegiate band room and determine if those sound pressure levels are of a magnitude that exceeds the policy standards and recommendations of the Occupational Safety and Health Administration (OSHA), and the National Institute of Occupational Safety and Health (NIOSH). In addition, reverberation times were measured and analyzed in order to determine the appropriateness of acoustical conditions for the band rehearsal environment. Sound pressure measurements were taken from the rehearsal of seven collegiate marching bands. Single sample t test were conducted to compare the sound pressure levels of all bands to the noise exposure standards of OSHA and NIOSH. Multiple regression analysis were conducted and analyzed in order to determine the effect of the band room's conditions on the sound pressure levels and reverberation times. Time weighted averages (TWA), noise percentage doses, and peak levels were also collected. The mean Leq for all band directors was 90.5 dBA. The total accumulated noise percentage dose for all band directors was 77.6% of the maximum allowable daily noise dose under the OSHA standard. The total calculated TWA for all band directors was 88.2% of the maximum allowable daily noise dose under the OSHA standard. The total accumulated noise percentage dose for all band directors was 152.1% of the maximum allowable daily noise dose under the NIOSH standards, and the total calculated TWA for all band directors was 93dBA of the maximum allowable daily noise dose under the NIOSH standard. Multiple regression analysis revealed that the room volume, the level of acoustical treatment and the mean room reverberation time predicted 80% of the variance in sound pressure levels in this study.

Extreme Precipitation in Poland in the Years 1951-2010

NASA Astrophysics Data System (ADS)

Malinowska, Miroslawa

2017-12-01

The characteristics of extreme precipitation, including the dominant trends, were analysed for eight stations located in different parts of Poland for the period 1951-2010. Five indices enabling the assessment of the intensity and frequency of both extremely dry and wet conditions were applied. The indices included the number of days with precipitation ≥10mm·d-1 (R10), maximum number of consecutive dry days (CDD), maximum 5-day precipitation total (R5d), simple daily intensity index (SDII), and the fraction of annual total precipitation due to events exceeding the 95th percentile calculated for the period 1961-1990. Annual trends were calculated using standard linear regression method, while the fit of the model was assessed with the F-test at the 95% confidence level. The analysed changes in extreme precipitation showed mixed patterns. A significant positive trend in the number of days with precipitation ≥10mm·d-1 (R10) was observed in central Poland, while a significant negative one, in south-eastern Poland. Based on the analysis of maximum 5-day precipitation totals (R5d), statistically significant positive trends in north-western, western and eastern parts of the country were detected, while the negative trends were found in the central and northeastern parts. Daily precipitation, expressed as single daily intensity index (SDII), increased over time in northern and central Poland. In southern Poland, the variation of SDII index showed non-significant negative tendencies. Finally, the fraction of annual total precipitation due to the events exceeding the 1961-1990 95th percentile increased at one station only, namely, in Warsaw. The indicator which refers to dry conditions, i.e. maximum number of consecutive dry days (CDD) displayed negative trends throughout the surveyed area, with the exception of Szczecin that is a representative of north-western Poland.

A phylogenetic approach to total evaporative water loss in mammals.

PubMed

Van Sant, Matthew J; Oufiero, Christopher E; Muñoz-Garcia, Agustí; Hammond, Kimberly A; Williams, Joseph B

2012-01-01

Maintaining appropriate water balance is a constant challenge for terrestrial mammals, and this problem can be exacerbated in desiccating environments. It has been proposed that natural selection has provided desert-dwelling mammals physiological mechanisms to reduce rates of total evaporative water loss. In this study, we evaluated the relationship between total evaporative water loss and body mass in mammals by using a recent phylogenetic hypothesis. We compared total evaporative water loss in 80 species of arid-zone mammals to that in 56 species that inhabit mesic regions, ranging in size from 4 g to 3,500 kg, to test the hypothesis that mammals from arid environments have lower rates of total evaporative water loss than mammals from mesic environments once phylogeny is taken into account. We found that arid species had lower rates of total evaporative water loss than mesic species when using a dichotomous variable to describe habitat (arid or mesic). We also found that total evaporative water loss was negatively correlated with the average maximum and minimum environmental temperature as well as the maximum vapor pressure deficit of the environment. Annual precipitation and the variable Q (a measure of habitat aridity) were positively correlated with total evaporative water loss. These results support the hypothesis that desert-dwelling mammals have lower rates of total evaporative water loss than mesic species after controlling for body mass and evolutionary relatedness regardless of whether categorical or continuous variables are used to describe habitat.

Predicting obstructive coronary artery disease using carotid ultrasound parameters: a nomogram from a large real-world clinical data.

PubMed

Wu, Na; Chen, Xinghua; Li, Mingyang; Qu, Xiaolong; Li, Yueli; Xie, Weijia; Wu, Long; Xiang, Ying; Li, Yafei; Zhong, Li

2018-05-21

Carotid ultrasound is a non-invasive tool for risk assessment of coronary artery disease (CAD). There is no consensus on which carotid ultrasound parameter constitutes the best measurement of atherosclerosis. We investigated which model of carotid ultrasound parameters and clinical risk factors (CRF) have the highest predictive value for CAD. We enrolled 2431 consecutive patients who have suspected CAD and underwent coronary angiography and carotid ultrasound with measurements of carotid intima-media thickness (CIMT), total number of plaques and areas of different types of plaques classified by echogenicity. Total number of plaques demonstrated the highest incremental prediction ability to predict CAD over CRF (area under the curve [AUC] 0.752 vs 0.701, net reclassification index [NRI] = 0.514, P < 0.001), followed by area of maximum mixed and soft plaques. CIMT had no significant incremental value over CRF (AUC 0.704 vs 0.701, P = 0.241; NRI = 0.062, P = 0.168). The model comprising total number of plaques, areas of maximum soft, hard and mixed plaques plus CRF had the highest discriminatory (AUC = 0.757) and reclassification value (NRI = 0.567) for CAD. A nomogram based on this model was developed to predict CAD. For subjects at low and intermediate risk, the model comprising total number of plaques plus CRF was the best. Total number of plaques, area of maximum soft, hard and mixed plaques showed significantly incremental prediction ability over CRF. A nomogram based on these factors provided an intuitive and practical method in detecting CAD. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Correlation of different spectral lights with biomass accumulation and production of antioxidant secondary metabolites in callus cultures of medicinally important Prunella vulgaris L.

PubMed

Fazal, Hina; Abbasi, Bilal Haider; Ahmad, Nisar; Ali, Syed Shujait; Akbar, Fazal; Kanwal, Farina

2016-06-01

Light is one of the key elicitors that directly fluctuates plant developmental processes and biosynthesis of secondary metabolites. In this study, the effects of various spectral lights on biomass accumulation and production of antioxidant secondary metabolites in callus cultures of Prunella vulgaris were investigated. Among different spectral lights, green light induced the maximum callogenic response (95%). Enhanced fresh biomass accumulation was observed in log phases on day-35, when callus cultures were exposed to yellow and violet lights. Yellow light induced maximum biomass accumulation (3.67g/100ml) from leaf explants as compared to control (1.27g/100ml). In contrast, violet lights enhanced biomass accumulation (3.49g/100ml) from petiole explant. Maximum total phenolics content (TPC; 23.9mg/g-DW) and total flavonoids content (TFC; 1.65mg/g-DW) were observed when cultures were grown under blue lights. In contrast, green and yellow lights enhanced total phenolics production (TPP; 112.52g/100ml) and total flavonoids production (TFP; 9.64g/100ml) as compared to control. The calli grown under green, red and blue lights enhanced DPPH-free radical scavenging activity (DFRSA; 91.3%, 93.1% and 93%) than control (56.44%) respectively. The DFRSA was correlated either with TPC and TFC or TPP and TFP. Furthermore, yellow lights enhanced superoxide dismutase (SOD), peroxidase (POD) and protease activities, however, the content of total protein (CTP) was higher in control cultures (186μg BSAE/mg FW) as compared to spectral lights. These results suggest that the exposure of callus cultures to various spectral lights have shown a key role in biomass accumulation and production of antioxidant secondary metabolites. Copyright © 2016 Elsevier B.V. All rights reserved.

Solar Irradiance Variations on Active Region Time Scales

NASA Technical Reports Server (NTRS)

Labonte, B. J. (Editor); Chapman, G. A. (Editor); Hudson, H. S. (Editor); Willson, R. C. (Editor)

1984-01-01

The variations of the total solar irradiance is an important tool for studying the Sun, thanks to the development of very precise sensors such as the ACRIM instrument on board the Solar Maximum Mission. The largest variations of the total irradiance occur on time scales of a few days are caused by solar active regions, especially sunspots. Efforts were made to describe the active region effects on total and spectral irradiance.

Direct measurement of a patient's entrance skin dose during pediatric cardiac catheterization

PubMed Central

Sun, Lue; Mizuno, Yusuke; Iwamoto, Mari; Goto, Takahisa; Koguchi, Yasuhiro; Miyamoto, Yuka; Tsuboi, Koji; Chida, Koichi; Moritake, Takashi

2014-01-01

Children with complex congenital heart diseases often require repeated cardiac catheterization; however, children are more radiosensitive than adults. Therefore, radiation-induced carcinogenesis is an important consideration for children who undergo those procedures. We measured entrance skin doses (ESDs) using radio-photoluminescence dosimeter (RPLD) chips during cardiac catheterization for 15 pediatric patients (median age, 1.92 years; males, n = 9; females, n = 6) with cardiac diseases. Four RPLD chips were placed on the patient's posterior and right side of the chest. Correlations between maximum ESD and dose–area products (DAP), total number of frames, total fluoroscopic time, number of cine runs, cumulative dose at the interventional reference point (IRP), body weight, chest thickness, and height were analyzed. The maximum ESD was 80 ± 59 (mean ± standard deviation) mGy. Maximum ESD closely correlated with both DAP (r = 0.78) and cumulative dose at the IRP (r = 0.82). Maximum ESD for coiling and ballooning tended to be higher than that for ablation, balloon atrial septostomy, and diagnostic procedures. In conclusion, we directly measured ESD using RPLD chips and found that maximum ESD could be estimated in real-time using angiographic parameters, such as DAP and cumulative dose at the IRP. Children requiring repeated catheterizations would be exposed to high radiation levels throughout their lives, although treatment influences radiation dose. Therefore, the radiation dose associated with individual cardiac catheterizations should be analyzed, and the effects of radiation throughout the lives of such patients should be followed. PMID:24968708

46 CFR 147A.11 - Person in charge of fumigation; before fumigation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... the vessel of: (1) The space that is to be fumigated; (2) The name, address, and emergency telephone... fumigant; (5) The spaces that are determined to be safe for occupancy paragraph (b)(1)(i) of this section; (6) The maximum allowable concentration of fumigant in spaces, if any, that are determined to be safe...

46 CFR 147A.11 - Person in charge of fumigation; before fumigation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... the vessel of: (1) The space that is to be fumigated; (2) The name, address, and emergency telephone... fumigant; (5) The spaces that are determined to be safe for occupancy paragraph (b)(1)(i) of this section; (6) The maximum allowable concentration of fumigant in spaces, if any, that are determined to be safe...

78 FR 35178 - Indian Housing Block Grant Allocation Formula: Notice of Proposed Negotiated Rulemaking Committee...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-12

... negotiated rulemaking committee membership. SUMMARY: On September 18, 2012, HUD published a document in the... of comments allows the commenter maximum time to prepare and submit a comment, ensures timely receipt... inspection and copying between 8 a.m. and 5 p.m. weekdays at the above address. Due to security measures at...

77 FR 73493 - Notice of Proposed Information Collection: Comment Request Family Self-Sufficiency Program...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-10

.... DATES: Comments Due Date: February 8, 2013. ADDRESSES: Interested persons are invited to submit comments... model is needed because participant self-selection into FSS limits the ability to know whether program.... Tracking survey sample 3,000 1 Maximum of 1 hour over 3,000 hours. the tracking period, mainly to update...

Operations and Maintenance April Newsletter | Poster

Cancer.gov

Summertime is coming and with it warmer temperatures, so get out there and enjoy it. The Operations and Maintenance (O&M) department has talented individuals dedicated to maintaining your air conditioning equipment for maximum efficiency. Our staff are always ready to address issues even in the dog days of summer. Please be assured that we are working diligently to keep you

Optimal allocation of invasive species surveillance with the maximum expected coverage concept

Treesearch

Denys Yemshanov; Robert G. Haight; Frank H. Koch; Bo Lu; Robert Venette; D. Barry Lyons; Taylor Scarr; Krista Ryall; Brian. Leung

2015-01-01

We address the problem of geographically allocating scarce survey resources to detect pests in their pathways of introduction given information about their likelihood of movement between origins and destinations. We introduce a model for selecting destination sites for survey that departs from the aim of reducing propagule pressure (PP) in pest destinations and instead...

The Application of the Monte Carlo Approach to Cognitive Diagnostic Computerized Adaptive Testing With Content Constraints

ERIC Educational Resources Information Center

Mao, Xiuzhen; Xin, Tao

2013-01-01

The Monte Carlo approach which has previously been implemented in traditional computerized adaptive testing (CAT) is applied here to cognitive diagnostic CAT to test the ability of this approach to address multiple content constraints. The performance of the Monte Carlo approach is compared with the performance of the modified maximum global…

78 FR 59939 - Announcement of Requirements and Registration for Respirator Trusted-Source Mobile Application...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-30

... demo video showing your application in action. Post videos to video-sharing sites like YouTube. (3... maximum of 10 slides. We strongly recommend you explain how you addressed the evaluation criteria and the... Use--20% Are you able to search for information easily? Is the requested information, both text and...

49 CFR 192.112 - Additional design requirements for steel pipe using alternative maximum allowable operating...

Code of Federal Regulations, 2011 CFR

2011-10-01

..., fully killed, continuously cast steel with calcium treatment. (2) The carbon equivalents of the steel... under this section. (b) Fracture control (1) The toughness properties for pipe must address the... specification level 2 or ASME B31.8 (incorporated by reference, see § 192.7). (2) Fracture control must: (i...

49 CFR 192.112 - Additional design requirements for steel pipe using alternative maximum allowable operating...

Code of Federal Regulations, 2012 CFR

2012-10-01

..., fully killed, continuously cast steel with calcium treatment. (2) The carbon equivalents of the steel... under this section. (b) Fracture control (1) The toughness properties for pipe must address the... specification level 2 or ASME B31.8 (incorporated by reference, see § 192.7). (2) Fracture control must: (i...

49 CFR 192.112 - Additional design requirements for steel pipe using alternative maximum allowable operating...

Code of Federal Regulations, 2013 CFR

2013-10-01

..., fully killed, continuously cast steel with calcium treatment. (2) The carbon equivalents of the steel... under this section. (b) Fracture control (1) The toughness properties for pipe must address the... specification level 2 or ASME B31.8 (incorporated by reference, see § 192.7). (2) Fracture control must: (i...

49 CFR 192.112 - Additional design requirements for steel pipe using alternative maximum allowable operating...

Code of Federal Regulations, 2010 CFR

2010-10-01

..., fully killed, continuously cast steel with calcium treatment. (2) The carbon equivalents of the steel... under this section. (b) Fracture control (1) The toughness properties for pipe must address the... specification level 2 or ASME B31.8 (incorporated by reference, see § 192.7). (2) Fracture control must: (i...

49 CFR 192.112 - Additional design requirements for steel pipe using alternative maximum allowable operating...

Code of Federal Regulations, 2014 CFR

2014-10-01

..., fully killed, continuously cast steel with calcium treatment. (2) The carbon equivalents of the steel... under this section. (b) Fracture control (1) The toughness properties for pipe must address the... specification level 2 or ASME B31.8 (incorporated by reference, see § 192.7). (2) Fracture control must: (i...

77 FR 5717 - National Organic Program; Proposed Amendment to the National List of Allowed and Prohibited...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-06

... Service 7 CFR Part 205 [Document Number AMS-NOP-11-0063; NOP-11-11PR] RIN 0581-AD18 National Organic... address a recommendation submitted to the Secretary of Agriculture (Secretary) by the National Organic... maximum levels currently allowed in organic poultry production after October 1, 2012. This proposed rule...

An Analysis of Program Managers as Total Life Cycle Systems Managers

DTIC Science & Technology

2017-09-01

S) AND ADDRESS(ES) N/A 10. SPONSORING / MONITORING AGENCY REPORT NUMBER 11. SUPPLEMENTARY NOTES The views expressed in this thesis are those of...Total Life Cycle Systems Management (TLCSM) is a term used in Army Regulation ( AR ) 70-1 to describe the responsibility of the Army Program Manager (PM...away from the PM. However, other Army guidance challenges AR 70-1 when transitioning to the Operations and Support phase of the acquisition life

Mouse forepaw lumbrical muscles are resistant to age-related declines in force production.

PubMed

Russell, Katelyn A; Ng, Rainer; Faulkner, John A; Claflin, Dennis R; Mendias, Christopher L

2015-05-01

A progressive loss of skeletal muscle mass and force generating capacity occurs with aging. Mice are commonly used in the study of aging-associated changes in muscle size and strength, with most models of aging demonstrating 15-35% reductions in muscle mass, cross-sectional area (CSA), maximum isometric force production (Po) and specific force (sPo), which is Po/CSA. The lumbrical muscle of the mouse forepaw is exceptionally small, with corresponding short diffusion distances that make it ideal for in vitro pharmacological studies and measurements of contractile properties. However, the aging-associated changes in lumbrical function have not previously been reported. To address this, we tested the hypothesis that compared to adult (12month old) mice, the forepaw lumbrical muscles of old (30month old) mice exhibit aging-related declines in size and force production similar to those observed in larger limb muscles. We found that the forepaw lumbricals were composed exclusively of fibers with type II myosin heavy chain isoforms, and that the muscles accumulated connective tissue with aging. There were no differences in the number of fibers per whole-muscle cross-section or in muscle fiber CSA. The whole muscle CSA in old mice was increased by 17%, but the total CSA of all muscle fibers in a whole-muscle cross-section was not different. No difference in Po was observed, and while sPo normalized to total muscle CSA was decreased in old mice by 22%, normalizing Po by the total muscle fiber CSA resulted in no difference in sPo. Combined, these results indicate that forepaw lumbrical muscles from 30month old mice are largely protected from the aging-associated declines in size and force production that are typically observed in larger limb muscles. Copyright © 2015 Elsevier Inc. All rights reserved.

Mapping the expansion of galamsey gold mines in the cocoa growing area of Ghana using optical remote sensing

NASA Astrophysics Data System (ADS)

Snapir, B.; Simms, D. M.; Waine, T. W.

2017-06-01

Artisanal gold mining (galamsey) and cocoa farming are essential sources of income for local populations in Ghana. Unfortunately the former poses serious threats to the environment and human health, and conflicts with cocoa farming and other livelihoods. Timely and spatially referenced information on the extent of galamsey is needed to understand and limit the negative impacts of mining. To address this, we use multi-date UK-DMC2 satellite images to map the extent and expansion of galamsey from 2011 to 2015. We map the total area of galamsey in 2013 over the cocoa growing area, using k-means clustering on a cloud-free 2013 image with strong spectral contrast between galamsey and the surrounding vegetation. We also process a pair of hazy images from 2011 and 2015 with Multivariate Alteration Detection to map the 2011-2015 galamsey expansion in a subset, labelled the change area. We use a set of visually interpreted random sample points to compute bias-corrected area estimates. We also delineate an indicative impact zone of pollution proportional to the density of galamsey, assuming a maximum radius of 10 km. In the cocoa growing area of Ghana, the estimated total area of galamsey in 2013 is 27,839 ha with an impact zone of 551,496 ha. In the change area, galamsey has more than tripled between 2011 and 2015, resulting in 603 ha of direct encroachment into protected forest reserves. Assuming the same growth rate for the rest of the cocoa growing area, the total area of galamsey in 2015 is estimated at 43,879 ha. Galamsey is developing along most of the river network (Offin, Ankobra, Birim, Anum, Tano), with downstream pollution affecting both land and water.

Soil water content and evaporation determined by thermal parameters obtained from ground-based and remote measurements

NASA Technical Reports Server (NTRS)

Reginato, R.; Idso, S.; Vedder, J.; Jackson, R.; Blanchard, M.; Goettelman, R.

1975-01-01

A procedure is presented for calculating 24-hour totals of evaporation from wet and drying soils. Its application requires a knowledge of the daily solar radiation, the maximum and minimum, air temperatures, moist surface albedo, and maximum and minimum surface temperatures. Tests of the technique on a bare field of Avondale loam at Phoenix, Arizona showed it to be independent of season.

The correlation of the maximum intensity of fluorescence with pigment characteristics of leaves of Betula pendula

NASA Astrophysics Data System (ADS)

Zavoruev, V. V.; Zavorueva, E. N.

2015-11-01

Using fluorimeter Junior PAM (Heinz Walz GmbH, Germany) the fluorescence parameters of leaves of Betula pendula are investigated. A linear dependence of the maximum fluorescence (Fm) of leaves from the ratio of total chlorophylls concentration to concentration of carotenoids is obtained. Such dependence is found for samples collected during the period of vegetation and for simultaneous selection of colored leaves.

40 CFR 414.91 - Toxic pollutant effluent limitations and standards for direct discharge point sources that use...

Code of Federal Regulations, 2013 CFR

2013-07-01

... Chloride 190 86 Methylene Chloride 89 40 Naphthalene 59 22 Nitrobenzene 68 27 2-Nitrophenol 69 41 4...-Trichloroethane 54 21 Trichloroethylene 54 21 Vinyl Chloride 268 104 1 All units are micrograms per liter. 2 Total... the zinc chloride/solvent process is 6,796 µg/l and 3,325 µg/l for maximum for any one day and maximum...

Inventory of File gfs.t06z.smartguam06.tm00.grib2

Science.gov Websites

(0=sea, 1=land) [Proportion] 009 surface APCP 3-6 hour acc Total Precipitation [kg/m^2] 010 surface ] 020 surface TMAX 3-6 hour acc Maximum Temperature [K] 021 surface TMIN 3-6 hour acc Minimum Temperature [K] 022 surface MAXRH 3-6 hour acc Maximum Relative Humidity [%] 023 surface MINRH 3-6 hour acc

Rio’s Mountainous Region (“Região Serrana”) 2011 Landslides: Impact on Public Mental Health System

PubMed Central

Dell'Aringa, Marcelo; Ranzani, Otavio; Bierens, Joost; Murray, Virginia

2018-01-01

INTRODUCTION In January 2011 landslides and floods followed heavy rain in the Mountainous Region of Rio de Janeiro State (“Região Serrana”), in southeastern Brazil. These events led to the largest disaster registered in Brazilian recent history. Few studies addressed the impacts of this disaster on public health, and we found none addressing the impact on mental health. This study reviewed the consequences of the 2011 disaster in the “Região Serrana”, by comparing the demand for public mental health assistance data from time periods before and after the even  METHODS  We performed an ecologic study, analysing the aggregate data from “Região Serrana” during the period two years before and after the disaster, exporting data from the Brazilian open access public health database. The primary outcome was defined as Mental Health Care Demand, and for that we calculated the number of mental health care visits per month, the proportion of visits due to mental health care and the monthly absolute number of mental health care visits per CAPS – “Centro de Atenção Psicossocial” (Psychosocial Care Centre). For secondary outcomes we evaluated the total number of deaths by any reason, and the total number of hospitalizations. The other health administrative regions of Rio de Janeiro state were used as control group.  RESULTS  We observed that there was an important increase in the rate of visits due to mental health in the six months after the landslides, from 13,875 to 17,690, reaching its maximum one year after the event totalizing 21,980 visits (Dec 2011). It was also observed that the proportion of visits due to mental health disorders increased after the event in the “Região Serrana”, as well as the number of mental health care visits per CAPS.   DISCUSSION  In conclusion, we observed that the 2011 Landslides in “Região Serrana” led to a sustained higher burden to public mental health care. There was an increase in the demand for mental health visits, and the ratio of visits per CAPS was higher during most part of the studied period after the event, even with the region having more CAPS than before. PMID:29623240

Rio's Mountainous Region ("Região Serrana") 2011 Landslides: Impact on Public Mental Health System.

PubMed

Dell'Aringa, Marcelo; Ranzani, Otavio; Bierens, Joost; Murray, Virginia

2018-01-25

INTRODUCTION In January 2011 landslides and floods followed heavy rain in the Mountainous Region of Rio de Janeiro State ("Região Serrana"), in southeastern Brazil. These events led to the largest disaster registered in Brazilian recent history. Few studies addressed the impacts of this disaster on public health, and we found none addressing the impact on mental health. This study reviewed the consequences of the 2011 disaster in the "Região Serrana", by comparing the demand for public mental health assistance data from time periods before and after the even  METHODS  We performed an ecologic study, analysing the aggregate data from "Região Serrana" during the period two years before and after the disaster, exporting data from the Brazilian open access public health database. The primary outcome was defined as Mental Health Care Demand, and for that we calculated the number of mental health care visits per month, the proportion of visits due to mental health care and the monthly absolute number of mental health care visits per CAPS - "Centro de Atenção Psicossocial" (Psychosocial Care Centre). For secondary outcomes we evaluated the total number of deaths by any reason, and the total number of hospitalizations. The other health administrative regions of Rio de Janeiro state were used as control group.  RESULTS  We observed that there was an important increase in the rate of visits due to mental health in the six months after the landslides, from 13,875 to 17,690, reaching its maximum one year after the event totalizing 21,980 visits (Dec 2011). It was also observed that the proportion of visits due to mental health disorders increased after the event in the "Região Serrana", as well as the number of mental health care visits per CAPS.   DISCUSSION  In conclusion, we observed that the 2011 Landslides in "Região Serrana" led to a sustained higher burden to public mental health care. There was an increase in the demand for mental health visits, and the ratio of visits per CAPS was higher during most part of the studied period after the event, even with the region having more CAPS than before.

First passage Brownian functional properties of snowmelt dynamics

NASA Astrophysics Data System (ADS)

Dubey, Ashutosh; Bandyopadhyay, Malay

2018-04-01

In this paper, we model snow-melt dynamics in terms of a Brownian motion (BM) with purely time dependent drift and difusion and examine its first passage properties by suggesting and examining several Brownian functionals which characterize the lifetime and reactivity of such stochastic processes. We introduce several probability distribution functions (PDFs) associated with such time dependent BMs. For instance, for a BM with initial starting point x0, we derive analytical expressions for : (i) the PDF P(tf|x0) of the first passage time tf which specify the lifetime of such stochastic process, (ii) the PDF P(A|x0) of the area A till the first passage time and it provides us numerous valuable information about the total fresh water availability during melting, (iii) the PDF P(M) associated with the maximum size M of the BM process before the first passage time, and (iv) the joint PDF P(M; tm) of the maximum size M and its occurrence time tm before the first passage time. These P(M) and P(M; tm) are useful in determining the time of maximum fresh water availability and in calculating the total maximum amount of available fresh water. These PDFs are examined for the power law time dependent drift and diffusion which matches quite well with the available data of snowmelt dynamics.

Relationship between phases of quasi-decadal oscillations of total ozone and the 11-year solar cycle

NASA Astrophysics Data System (ADS)

Visheratin, K. N.

2012-02-01

Temporal variability of the relationship between the phases of quasi-decadal oscillations (QDOs) of total ozone (TO), measured at the Arosa station, and the Ri international sunspot number have been analyzed for the period of 1932-2009. Before the 1970s, the maximum phase of ozone QDOs lagged behind solar activity variations by about 2.5-2.8 years and later outstripped by about 1.5 years. We assumed that the TO QDOs in midlatitudes of the Northern Hemisphere were close to being in resonance with solar activity oscillations in the period from the mid-1960s to the mid-1970s and assessed the characteristic delay period of TO QDOs. The global distribution of phases and amplitudes of TO QDOs have been studied for the period from 1979 to 2008 based on satellite data. The maximum phase of TO QDOs first onsets in northern middle and high latitudes and coincides with the end of the growth phase of the 11-year solar cycle. In the tropics, the maximum oscillation phase lags behind by 0.5-1 year. The maximum phase lag near 40-50° S is about two years. The latitudinal variations of the phase of TO QDOs have been approximated.

Prospective application of Leucaena leucocephala for phytoextraction of Cd and Zn and nitrogen fixation in metal polluted soils.

PubMed

Saraswat, Shweta; Rai, J P N

2011-03-01

The study deals with phytoextraction of Zn and Cd by Leucaena leucocephala grown on effluent fed and low nitrogen soils collected from S1, S2, and S3 sites, representing decreasing metal content with increasing distance from the effluent drain. Plant nitrogen fixation potential and soil micro-biochemical attributes against metal stress were also assessed. Increasing soil metal content and plant growth enhanced metal accumulation. Relatively greater amount of Zn than Cd was accumulated by L. leucocephala, which exceeded in roots with that of other parts. Remediation factor for Cd was maximum (3.6%) in S2 grown plant. Nodule numbers, their biomass, nitrogenase activity, and leghaemoglobin content were maximum in plants grown in S3 and minimum in S1 soil having maximum metals. Maximum soil organic C, total N, C(mic), and N(mic), respiration rate, ATP content, and enzymatic activities in response to phytoremediation was recorded in S3 followed by S2 and S1. Phytoremediation for a year enhanced extractable Zn and Cd by 36% and 45%, and their total removal by 20% and 30%, respectively from S2, which suggests the possible application of L. leucocephala for the remediation of metal contaminated sites and their fertility restoration by improving microbial functionalities and N-pool.

FORTRAN program for calculating total efficiency - specific speed characteristics of centrifugal compressors

NASA Technical Reports Server (NTRS)

Galvas, M. R.

1972-01-01

A computer program for predicting design point specific speed - efficiency characteristics of centrifugal compressors is presented with instructions for its use. The method permits rapid selection of compressor geometry that yields maximum total efficiency for a particular application. A numerical example is included to demonstrate the selection procedure.

High Speed Liquid Chromatographic Determination of Total Aromatics in Enamel and Lacquer Solvents.

ERIC Educational Resources Information Center

Esposito, G. G.

Aromatic solvents possess the strongest solvency of the hydrogen types, but various air pollution control districts have established maximum limits on the amount that may be present in organic coatings. In the proposed procedure, high efficiency liquid chromatography is used to determine total aromatics in enamels and lacquer thinners, their…

33 CFR 157.03 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... port of final cargo discharge. Breadth or B means the maximum molded breadth of a vessel in meters... lightweight displacement and the total displacement of a vessel measured in water of specific gravity 1.025 at... of each is more than 1/15 of the total depth of the tank. Length or L means the distance in meters...

33 CFR 157.03 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... port of final cargo discharge. Breadth or B means the maximum molded breadth of a vessel in meters... lightweight displacement and the total displacement of a vessel measured in water of specific gravity 1.025 at... of each is more than 1/15 of the total depth of the tank. Length or L means the distance in meters...

33 CFR 157.03 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... port of final cargo discharge. Breadth or B means the maximum molded breadth of a vessel in meters... lightweight displacement and the total displacement of a vessel measured in water of specific gravity 1.025 at... of each is more than 1/15 of the total depth of the tank. Length or L means the distance in meters...

40 CFR Table 5 to Subpart Hhhhhhh... - Operating Parameters, Operating Limits and Data Monitoring, Recording and Compliance Frequencies...

Code of Federal Regulations, 2013 CFR

2013-07-01

... conductivity Continuous Every 15 minutes 3-hour block average. Regenerative Adsorber Regeneration stream flow. Minimum total flow per regeneration cycle Continuous N/A Total flow for each regeneration cycle. Adsorber bed temperature. Maximum temperature Continuously after regeneration and within 15 minutes of...

40 CFR Table 5 to Subpart Hhhhhhh... - Operating Parameters, Operating Limits and Data Monitoring, Recording and Compliance Frequencies...

Code of Federal Regulations, 2014 CFR

2014-07-01

... conductivity Continuous Every 15 minutes 3-hour block average. Regenerative Adsorber Regeneration stream flow. Minimum total flow per regeneration cycle Continuous N/A Total flow for each regeneration cycle. Adsorber bed temperature. Maximum temperature Continuously after regeneration and within 15 minutes of...

Total aflatoxins in complementary foods produced at community levels using locally available ingredients in Ethiopia.

PubMed

Ayelign, Abebe; Woldegiorgis, Ashagrie Zewdu; Adish, Abdulaziz; De Saeger, Sarah

2018-06-01

This study was conducted to determine the occurrence and levels of total aflatoxins in complementary foods (CFs) and their ingredients. A total of 126 samples collected from 20 Districts from Amhara, Tigray, Oromia, and Southern Nations Nationalities and Peoples (SNNP) regions were analysed for levels of total aflatoxins using enzyme linked immunosorbent assay (ELISA). Aflatoxins were detected in 62 out of 66 pre-milling samples with mean range of 0.3-9.9 µg/kg. Aflatoxins were also detected in 19 out of 20 post-production CFs and in all of the one-month stored CFs at households and grain banks, with a mean range of 0.5-8.0, 3.6-11.3, and 0.2-12.4 µg/kg, respectively. Overall, 3 out of 126 samples exceeded the maximum limit (10 µg/kg). Although most aflatoxin levels were below the maximum limit and thus considered to be safe for consumption, more effort should be implemented to reduce contamination, as these CFs are intended for consumption by young children.

Long-term changes (1980-2003) in total ozone time series over Northern Hemisphere midlatitudes

NASA Astrophysics Data System (ADS)

Białek, Małgorzata

2006-03-01

Long-term changes in total ozone time series for Arosa, Belsk, Boulder and Sapporo stations are examined. For each station we analyze time series of the following statistical characteristics of the distribution of daily ozone data: seasonal mean, standard deviation, maximum and minimum of total daily ozone values for all seasons. The iterative statistical model is proposed to estimate trends and long-term changes in the statistical distribution of the daily total ozone data. The trends are calculated for the period 1980-2003. We observe lessening of negative trends in the seasonal means as compared to those calculated by WMO for 1980-2000. We discuss a possibility of a change of the distribution shape of ozone daily data using the Kolmogorov-Smirnov test and comparing trend values in the seasonal mean, standard deviation, maximum and minimum time series for the selected stations and seasons. The distribution shift toward lower values without a change in the distribution shape is suggested with the following exceptions: the spreading of the distribution toward lower values for Belsk during winter and no decisive result for Sapporo and Boulder in summer.

Paraprofessional Home Visitors' Perspectives on Addressing Poor Mental Health, Substance Abuse, and Domestic Violence: A Qualitative Study

ERIC Educational Resources Information Center

Tandon, S. Darius; Mercer, Constance D.; Saylor, Elizabeth L.; Duggan, Anne K.

2008-01-01

This research was conducted to understand paraprofessional home visitors' perceptions of their training in addressing poor mental health, substance abuse, and domestic violence, and their actions in working with families in addressing these issues. Five focus groups were conducted with a total of 28 paraprofessional home visitors. Three main…

Lake Tahoe

EPA Pesticide Factsheets

Information on the Lake Tahoe watershed, EPA's protection efforts, water quality issues, effects of climate change, Lake Tahoe Total Maximum Daily Load (TMDL), EPA-sponsored projects, list of partner agencies.

Optimal protocol for maximum work extraction in a feedback process with a time-varying potential

NASA Astrophysics Data System (ADS)

Kwon, Chulan

2017-12-01

The nonequilibrium nature of information thermodynamics is characterized by the inequality or non-negativity of the total entropy change of the system, memory, and reservoir. Mutual information change plays a crucial role in the inequality, in particular if work is extracted and the paradox of Maxwell's demon is raised. We consider the Brownian information engine where the protocol set of the harmonic potential is initially chosen by the measurement and varies in time. We confirm the inequality of the total entropy change by calculating, in detail, the entropic terms including the mutual information change. We rigorously find the optimal values of the time-dependent protocol for maximum extraction of work both for the finite-time and the quasi-static process.

Combinatoric analysis of heterogeneous stochastic self-assembly.

PubMed

D'Orsogna, Maria R; Zhao, Bingyu; Berenji, Bijan; Chou, Tom

2013-09-28

We analyze a fully stochastic model of heterogeneous nucleation and self-assembly in a closed system with a fixed total particle number M, and a fixed number of seeds Ns. Each seed can bind a maximum of N particles. A discrete master equation for the probability distribution of the cluster sizes is derived and the corresponding cluster concentrations are found using kinetic Monte-Carlo simulations in terms of the density of seeds, the total mass, and the maximum cluster size. In the limit of slow detachment, we also find new analytic expressions and recursion relations for the cluster densities at intermediate times and at equilibrium. Our analytic and numerical findings are compared with those obtained from classical mass-action equations and the discrepancies between the two approaches analyzed.

Water-quality assessment of the Trinity River Basin, Texas - Nutrients in streams draining an agricultural and an urban area, 1993-95

USGS Publications Warehouse

Land, Larry F.; Shipp, Allison A.

1996-01-01

Water samples collected from streams draining an agricultural area in the west-central part of the Trinity River Basin upstream from the Richland-Chambers Reservoir and from streams draining an urban area in the Dallas-Fort Worth metropolitan area during March 1993 - September 1995 were analyzed for nutrients (nitrogen and phosphorus compounds). A comparison of the data for agricultural and urban streams shows the maximum concentration of total nitrogen is from an urban stream and the maximum concentration of total phosphorus is from an agricultural stream. One-half of the samples have total nitrogen concentrations equal to or less than 1.1 and 1.0 milligrams per liter in the agricultural and urban streams, respectively; and one-half of the samples have total phosphorous concentrations equal to or less than 0.04 and 0.05 milligram per liter in the agricultural and urban streams, respectively. The highest concentrations of total nitrogen in both types of streams are in the spring. The minimum concentrations of total nitrogen are during the summer in the agricultural streams and during the winter in the urban streams. Concentrations of total phosphorus in agricultural streams show negligible seasonal variability. The highest concentrations of total phosphorus are in spring and possibly late summer in the urban streams. In the midrange of streamflow in the urban streams and throughout the range of streamflow in the agricultural streams, concentrations of total nitrogen increase. Concentrations of total phosphorus increase with streamflow in the middle and upper ranges of streamflow in both agricultural and urban streams.

Nonparametric probability density estimation by optimization theoretic techniques

NASA Technical Reports Server (NTRS)

Scott, D. W.

1976-01-01

Two nonparametric probability density estimators are considered. The first is the kernel estimator. The problem of choosing the kernel scaling factor based solely on a random sample is addressed. An interactive mode is discussed and an algorithm proposed to choose the scaling factor automatically. The second nonparametric probability estimate uses penalty function techniques with the maximum likelihood criterion. A discrete maximum penalized likelihood estimator is proposed and is shown to be consistent in the mean square error. A numerical implementation technique for the discrete solution is discussed and examples displayed. An extensive simulation study compares the integrated mean square error of the discrete and kernel estimators. The robustness of the discrete estimator is demonstrated graphically.

Alcohol-Related Blackouts, Negative Alcohol-Related Consequences, and Motivations for Drinking Reported by Newly Matriculating Transgender College Students

PubMed Central

Tupler, Larry A.; Zapp, Daniel; DeJong, William; Ali, Maryam; O’Rourke, Sarah; Looney, John; Swartzwelder, H. Scott

2017-01-01

Background Many transgender college students struggle with identity formation and other emotional, social, and developmental challenges associated with emerging adulthood. A potential maladaptive coping strategy employed by such students is heavy drinking. Prior literature has suggested greater consumption and negative alcohol-related consequences (ARCs) in transgender students compared with their cisgender peers, but little is known about their differing experiences with alcohol-related blackouts (ARBs). We examined the level of alcohol consumption, the frequency of ARBs and other ARCs, and motivations for drinking reported by the largest sample of transgender college students to date. Methods A Web survey from an alcohol-prevention program, AlcoholEdu for College™, assessed student demographics and drinking-related behaviors, experiences, and motivations of newly matriculating first-year college students. A self-reported drinking calendar was used to examine each of the following measures over the previous 14 days: number of drinking days, total number of drinks, and maximum number of drinks on any single day. A 7-point Likert scale was used to measure ARCs, ARBs, and drinking motivations. Transgender students of both sexes were compared with their cisgender peers. Results 989 of 422,906 students (0.2%) identified as transgender. Over a 14-day period, transgender compared with cisgender students were more likely to consume alcohol over more days, more total drinks, and a greater number of maximum drinks on a single day. Transgender students (36%) were more likely to report an ARB than cisgender students (25%) as well as more negative academic, confrontation-related, social, and sexual ARCs. Transgender respondents more often cited stress reduction, social anxiety, self-esteem issues, and the inherent properties of alcohol as motivations for drinking. For nearly all measures, higher values were yielded by male-to-female than female-to-male transgender students. Conclusions Transgender compared with cisgender first-year students engage in higher-risk drinking patterns and experience more ARBs and other negative ARCs. Broad institutional efforts are required to address the unique circumstances of transgender men and women and to reduce negative ARCs in college students, regardless of their sex or gender identity. PMID:28324915

Dosimetric effect of beam arrangement for intensity-modulated radiation therapy in the treatment of upper thoracic esophageal carcinoma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fu, Yuchuan; Deng, Min; Zhou, Xiaojuan

To evaluate the lung sparing in intensity-modulated radiation therapy (IMRT) for patients with upper thoracic esophageal tumors extending inferiorly to the thorax by different beam arrangement. Overall, 15 patient cases with cancer of upper thoracic esophagus were selected for a retrospective treatment-planning study. Intensity-modulated radiation therapy plans using 4, 5, and 7 beams (4B, 5B, and 7B) were developed for each patient by direct machine parameter optimization (DMPO). All plans were evaluated with respect to dose volumes to irradiated targets and normal structures, with statistical comparisons made between 4B with 5B and 7B intensity-modulated radiation therapy plans. Differences among plansmore » were evaluated using a two-tailed Friedman test at a statistical significance of p < 0.05. The maximum dose, average dose, and the conformity index (CI) of planning target volume 1 (PTV1) were similar for 3 plans for each case. No significant difference of coverage for planning target volume 1 and maximum dose for spinal cords were observed among 3 plans in present study (p > 0.05). The average V{sub 5}, V{sub 13}, V{sub 20}, mean lung dose, and generalized equivalent uniform dose (gEUD) for the total lung were significantly lower in 4B-plans than those data in 5B-plans and 7B-plans (p < 0.01). Although the average V{sub 30} for the total lung were significantly higher in 4B-plans than those in 5B-plans and 7B-plans (p < 0.05). In addition, when comparing with the 4B-plans, the conformity/heterogeneity index of the 5B- and 7B-plans were significantly superior (p < 0.05). The 4B-intensity-modulated radiation therapy plan has advantage to address the specialized problem of lung sparing to low- and intermediate-dose exposure in the thorax when dealing with relative long tumors extended inferiorly to the thoracic esophagus for upper esophageal carcinoma with the cost for less conformity. Studies are needed to compare the superiority of volumetric modulated arc therapy with intensity-modulated radiation therapy technique.« less

Ion-thruster propellant utilization

NASA Technical Reports Server (NTRS)

Kaufman, H. R.

1971-01-01

The evaluation and understanding of maximum propellant utilization, with mercury used as the propellant are presented. The primary-electron region in the ion chamber of a bombardment thruster is analyzed at maximum utilization. The results of this analysis, as well as experimental data from a range of ion-chamber configurations, show a nearly constant loss rate for unionized propellant at maximum utilization over a wide range of total propellant flow rate. The discharge loss level of 1000 eV/ion was used as a definition of maximum utilization, but the exact level of this definition has no effect on the qualitative results and little effect on the quantitative results. There are obvious design applications for the results of this investigation, but the results are particularly significant whenever efficient throttled operation is required.

Daily Temperature and Precipitation Data for 223 Former-USSR Stations (NDP-040)

DOE Data Explorer

Razuvaev, V. N. [Russian Research Institute of Hydrometeorological Information-World Data Centre; Apasova, E. B. [Russian Research Institute of Hydrometeorological Information-World Data Centre; Martuganov, R. A. [Russian Research Institute of Hydrometeorological Information-World Data Centre

1990-01-01

The stations in this dataset are considered by RIHMI to comprise one of the best networks suitable for temperature and precipitation monitoring over the the former-USSR. Factors involved in choosing these 223 stations included length or record, amount of missing data, and achieving reasonably good geographic coverage. There are indeed many more stations with daily data over this part of the world, and hundreds more station records are available through NOAA's Global Historical Climatology Network - Daily (GHCND) database. The 223 stations comprising this database are included in GHCND, but different data processing, updating, and quality assurance methods/checks mean that the agreement between records will vary depending on the station. The relative quality and accuracy of the common station records in the two databases also cannot be easily assessed. As of this writing, most of the common stations contained in the GHCND have more recent records, but not necessarily records starting as early as the records available here. This database contains four variables: daily mean, minimum, and maximum temperature, and daily total precipitation (liquid equivalent). Temperature were taken three times a day from 1881-1935, four times a day from 1936-65, and eight times a day since 1966. Daily mean temperature is defined as the average of all observations for each calendar day. Daily maximum/minimum temperatures are derived from maximum/minimum thermometer measurements. See the measurement description file for further details. Daily precipitation totals are also available (to the nearest tenth of a millimeter) for each station. Throughout the record, daily precipitation is defined as the total amount of precipitation recorded during a 24-h period, snowfall being converted to a liquid total by melting the snow in the gauge. From 1936 on, rain gauges were checked several times each day; the cumulative total of all observations during a calendar day was presumably used as the daily total. Again, see the measurement description file for further details.

Space availability in confined sheep during pregnancy, effects in movement patterns and use of space.

PubMed

Averós, Xavier; Lorea, Areta; Beltrán de Heredia, Ignacia; Arranz, Josune; Ruiz, Roberto; Estevez, Inma

2014-01-01

Space availability is essential to grant the welfare of animals. To determine the effect of space availability on movement and space use in pregnant ewes (Ovis aries), 54 individuals were studied during the last 11 weeks of gestation. Three treatments were tested (1, 2, and 3 m2/ewe; 6 ewes/group). Ewes' positions were collected for 15 minutes using continuous scan samplings two days/week. Total and net distance, net/total distance ratio, maximum and minimum step length, movement activity, angular dispersion, nearest, furthest and mean neighbour distance, peripheral location ratio, and corrected peripheral location ratio were calculated. Restriction in space availability resulted in smaller total travelled distance, net to total distance ratio, maximum step length, and angular dispersion but higher movement activity at 1 m2/ewe as compared to 2 and 3 m2/ewe (P<0.01). On the other hand, nearest and furthest neighbour distances increased from 1 to 3 m2/ewe (P<0.001). Largest total distance, maximum and minimum step length, and movement activity, as well as lowest net/total distance ratio and angular dispersion were observed during the first weeks (P<0.05) while inter-individual distances increased through gestation. Results indicate that movement patterns and space use in ewes were clearly restricted by limitations of space availability to 1 m2/ewe. This reflected in shorter, more sinuous trajectories composed of shorter steps, lower inter-individual distances and higher movement activity potentially linked with higher restlessness levels. On the contrary, differences between 2 and 3 m2/ewe, for most variables indicate that increasing space availability from 2 to 3 m2/ewe would appear to have limited benefits, reflected mostly in a further increment in the inter-individual distances among group members. No major variations in spatial requirements were detected through gestation, except for slight increments in inter-individual distances and an initial adaptation period, with ewes being restless and highly motivated to explore their new environment.

Water quality of Cedar Creek reservoir in northeast Texas, 1977 to 1984

USGS Publications Warehouse

Leibbrand, Norman F.; Gibbons, Willard J.

1987-01-01

The concentrations of total inorganic nitrogen, total nitrogen, and total phosphorus were largest during summer stagnation in water near the bottom at the deepest sites. At site Ac, the largest total phosphorus concentration was 5.3 milligrams per liter for a bottom sample. The maximum total inorganic nitrogen concentration for the same sample was 2.5 milligrams per liter. Water near the surface of Cedar Creek Reservoir during summer stagnation and throughout the reservoir during winter circulation had total phosphorus and total inorganic nitrogen concentrations of less than 0.1 milligram per liter. Total nitrogen concentrations near the surface ranged from 0.3 to 1.1 milligrams per liter from January 1980 to August 1984.

Reliability of reservoir firm yield determined from the historical drought of record

USGS Publications Warehouse

Archfield, S.A.; Vogel, R.M.

2005-01-01

The firm yield of a reservoir is typically defined as the maximum yield that could have been delivered without failure during the historical drought of record. In the future, reservoirs will experience droughts that are either more or less severe than the historical drought of record. The question addressed here is what the reliability of such systems will be when operated at the firm yield. To address this question, we examine the reliability of 25 hypothetical reservoirs sited across five locations in the central and western United States. These locations provided a continuous 756-month streamflow record spanning the same time interval. The firm yield of each reservoir was estimated from the historical drought of record at each location. To determine the steady-state monthly reliability of each firm-yield estimate, 12,000-month synthetic records were generated using the moving-blocks bootstrap method. Bootstrapping was repeated 100 times for each reservoir to obtain an average steady-state monthly reliability R, the number of months the reservoir did not fail divided by the total months. Values of R were greater than 0.99 for 60 percent of the study reservoirs; the other 40 percent ranged from 0.95 to 0.98. Estimates of R were highly correlated with both the level of development (ratio of firm yield to average streamflow) and average lag-1 monthly autocorrelation. Together these two predictors explained 92 percent of the variability in R, with the level of development alone explaining 85 percent of the variability. Copyright ASCE 2005.

Binary centrifugal microfluidics enabling novel, digital addressable functions for valving and routing.

PubMed

Wang, Guanghui; Tan, Jie; Tang, Minghui; Zhang, Changbin; Zhang, Dongying; Ji, Wenbin; Chen, Junhao; Ho, Ho-Pui; Zhang, Xuping

2018-03-16

Centrifugal microfluidics or lab-on-a-disc (LOAD) is a promising branch of lab-on-a-chip or microfluidics. Besides effective fluid transportation and inherently available density-based sample separation in centrifugal microfluidics, uniform actuation of flow on the disc makes the platform compact and scalable. However, the natural radially outward centrifugal force in a LOAD system limits its capacity to perform complex fluid manipulation steps. In order to increase the fluid manipulation freedom and integration capacity of the LOAD system, we propose a binary centrifugal microfluidics platform. With the help of Euler force, our platform allows free switching of both left and right states based on a rather simple mechanical structure. The periodical switching of state would provide a "clock" signal for a sequence of droplet binary logic operations. With the binary state platform and the "clock" signal, we can accurately handle the droplet separately in each time step with a maximum main frequency of about 10 S s-1 (switching per second). Apart from droplet manipulations such as droplet generation and metering, we also demonstrate a series of droplet logic operations, such as binary valving, droplet routing and digital addressable droplet storage. Furthermore, complex bioassays such as the Bradford assay and DNA purification assay are demonstrated on a binary platform, which is totally impossible for a traditional LOAD system. Our binary platform largely improves the capability for logic operation on the LOAD platform, and it is a simple and promising approach for microfluidic lab-on-a-disc large-scale integration.

Expanded Owens Valley Solar Array Science and Data Products

NASA Astrophysics Data System (ADS)

Gary, Dale E.; Hurford, G. J.; Nita, G. M.; Fleishman, G. D.; McTiernan, J. M.

2010-05-01

The Owens Valley Solar Array (OVSA) has been funded for major expansion, to create a university-based facility serving a broad scientific community, to keep the U.S. competitive in the field of solar radio physics. The project, funded by the National Science Foundation through the MRI-Recovery and Reinvestment program, will result in a world-class facility for scientific research at microwave radio frequencies (1-18 GHz) in solar and space weather physics. The project also includes an exciting program of targeted astronomical science. The solar science to be addressed focuses on the magnetic structure of the solar corona, on transient phenomena resulting from magnetic interactions, including the sudden release of energy and subsequent particle acceleration and heating, and on space weather phenomena. The project will support the scientific community by providing open data access and software tools for analysis of the data, to exploit synergies with on-going solar research in other wavelength bands. The New Jersey Institute of Technology (NJIT) will upgrade OVSA from its current complement of 7 antennas to a total of 15 by adding 8 new antennas, and will reinvest in the existing infrastructure by replacing the existing control systems, signal transmission, and signal processing with modern, far more capable and reliable systems based on new technology developed for the Frequency Agile Solar Radiotelescope (FASR). The project will be completed in time to provide solar-dedicated observations during the upcoming solar maximum in 2013 and beyond. We will detail the new science addressed by the expanded array, and provide an overview of the expected data products.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alam, Aftab; Khan, Suffian N.; Smirnov, A. V.

Korringa-Kohn-Rostoker (KKR) Green's function, multiple-scattering theory is an ecient sitecentered, electronic-structure technique for addressing an assembly of N scatterers. Wave-functions are expanded in a spherical-wave basis on each scattering center and indexed up to a maximum orbital and azimuthal number L max = (l,m) max, while scattering matrices, which determine spectral properties, are truncated at L tr = (l,m) tr where phase shifts δl>l tr are negligible. Historically, L max is set equal to L tr, which is correct for large enough L max but not computationally expedient; a better procedure retains higher-order (free-electron and single-site) contributions for L maxmore » > L tr with δl>l tr set to zero [Zhang and Butler, Phys. Rev. B 46, 7433]. We present a numerically ecient and accurate augmented-KKR Green's function formalism that solves the KKR equations by exact matrix inversion [R 3 process with rank N(l tr + 1) 2] and includes higher-L contributions via linear algebra [R 2 process with rank N(l max +1) 2]. Augmented-KKR approach yields properly normalized wave-functions, numerically cheaper basis-set convergence, and a total charge density and electron count that agrees with Lloyd's formula. We apply our formalism to fcc Cu, bcc Fe and L1 0 CoPt, and present the numerical results for accuracy and for the convergence of the total energies, Fermi energies, and magnetic moments versus L max for a given L tr.« less

Occupational exposure to electric fields and induced currents associated with 400 kV substation tasks from different service platforms.

PubMed

Korpinen, Leena H; Elovaara, Jarmo A; Kuisti, Harri A

2011-01-01

The aim of the study was to investigate the occupational exposure to electric fields, average current densities, and average total contact currents at 400 kV substation tasks from different service platforms (main transformer inspection, maintenance of operating device of disconnector, maintenance of operating device of circuit breaker). The average values are calculated over measured periods (about 2.5 min). In many work tasks, the maximum electric field strengths exceeded the action values proposed in the EU Directive 2004/40/EC, but the average electric fields (0.2-24.5 kV/m) were at least 40% lower than the maximum values. The average current densities were 0.1-2.3 mA/m² and the average total contact currents 2.0-143.2 µA, that is, clearly less than the limit values of the EU Directive. The average values of the currents in head and contact currents were 16-68% lower than the maximum values when we compared the average value from all cases in the same substation. In the future it is important to pay attention to the fact that the action and limit values of the EU Directive differ significantly. It is also important to take into account that generally, the workers' exposure to the electric fields, current densities, and total contact currents are obviously lower if we use the average values from a certain measured time period (e.g., 2.5 min) than in the case where exposure is defined with only the help of the maximum values. © 2010 Wiley-Liss, Inc.

ITEC: a congress that stuck to its theme. [International Total Energy Congress, Copenhagen; review of papers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jenkins, N.

A personal view of some of the papers presented at the International Total Energy Congress is presented by EI correspondent, Norman Jenkins. Mr. Jenkins observed that the Congress ''largely ignored such questions as building design with its related fenestration and insulation problems and got down (to) the nitty-gritty of maximum energy-use. What would have been a digression also, discussion of the not unimportant areas of energy acquisition, oil exploration, and gas/coal supplies and prices were reduced to side issues. Questions of nuclear choice and reactor safety, although touched upon by several speakers and referred to almost in passing by delegates,more » were, again by mutual consent, not allowed to divert attention away from the main--and to some grim--purpose of the meeting.'' In his keynote address, Emil Constantinescu ''suggested that the United Nations, even if somewhat late in the day, at least had been informed of the solutions that Total Energy could offer and would be debating these and their significance more fully in the immediate future.'' Mr Lennart Larson reviewed the international and familiar scene and stated his conviction that a nuclear power program is needed in his native Denmark. Other papers reviewed deal with subjects concerning the feasibility of total energy for all countries, storing of hot water, disposal of wastes, costs,transmission, environmental considerations, heat pump applications, fuels including use of forest products, fluidized bed techniques, and the process of converting condensing units to back pressure. A schematic is shown proposed by Ekono, a Finnish consulting firm, for the supply of nuclear district heating to Basel, Switzerland. The plant is about 15 km from the city and hot water is supplied at two temperatures. New circuits would operate at 110/sup 0/C, but the existing system in the city operates at 180/sup 0/C and has to be integrated with the nuclear source through a satellite heat and power station. (MCW)« less

Joint Transmitter and Receiver Power Allocation under Minimax MSE Criterion with Perfect and Imperfect CSI for MC-CDMA Transmissions

NASA Astrophysics Data System (ADS)

Kotchasarn, Chirawat; Saengudomlert, Poompat

We investigate the problem of joint transmitter and receiver power allocation with the minimax mean square error (MSE) criterion for uplink transmissions in a multi-carrier code division multiple access (MC-CDMA) system. The objective of power allocation is to minimize the maximum MSE among all users each of which has limited transmit power. This problem is a nonlinear optimization problem. Using the Lagrange multiplier method, we derive the Karush-Kuhn-Tucker (KKT) conditions which are necessary for a power allocation to be optimal. Numerical results indicate that, compared to the minimum total MSE criterion, the minimax MSE criterion yields a higher total MSE but provides a fairer treatment across the users. The advantages of the minimax MSE criterion are more evident when we consider the bit error rate (BER) estimates. Numerical results show that the minimax MSE criterion yields a lower maximum BER and a lower average BER. We also observe that, with the minimax MSE criterion, some users do not transmit at full power. For comparison, with the minimum total MSE criterion, all users transmit at full power. In addition, we investigate robust joint transmitter and receiver power allocation where the channel state information (CSI) is not perfect. The CSI error is assumed to be unknown but bounded by a deterministic value. This problem is formulated as a semidefinite programming (SDP) problem with bilinear matrix inequality (BMI) constraints. Numerical results show that, with imperfect CSI, the minimax MSE criterion also outperforms the minimum total MSE criterion in terms of the maximum and average BERs.

Effect of the flexibility training performed immediately before resistance training on muscle hypertrophy, maximum strength and flexibility.

PubMed

Junior, Roberto Moriggi; Berton, Ricardo; de Souza, Thiago Mattos Frota; Chacon-Mikahil, Mara Patrícia Traina; Cavaglieri, Cláudia Regina

2017-04-01

It has been suggested that flexibility training may reduce the total volume of training during resistance trainings. The purpose of this study was to compare the effect of flexibility training immediately before resistance training (FLEX-RT) versus resistance training without flexibility training (RT) on maximum strength and the vastus lateralis muscle cross-sectional area (CSA). Participants had each leg assigned to RT or FLEX-RT. Both groups performed four sets of leg extensions to voluntary failure of 80% of one repetition maximum (1RM); however, FLEX-RT performed two sets of 25 s of static stretching before resistance training. Number of repetitions and total volume were calculated during weeks 1-5 and 6-10. Vastus lateralis muscle CSA, 1RM, and flexibility were assessed at baseline and after 10 weeks. The number of repetitions and total training volume were greater for RT than FLEX-RT for weeks 1-5 and 6-10. Regarding the vastus lateralis muscle CSA, a main time effect was observed, however, greater change was observed for RT than FLEX-RT (12.7 and 7.4%, respectively). A main time effect for 1RM was also observed with similar changes for RT and FLEX-RT (12.7 and 12.9%, respectively). Flexibility was increased pre- to post-training for FLEX-RT with greater change for FLEX-RT (10.1%) than RT (2.1%). These results show that performing flexibility training immediately before resistance training can contribute to a lower number of repetitions, total volume, and muscle hypertrophy.

Frequency of annual maximum precipitation in the City of Charlotte and Mecklenburg County, North Carolina, through 2004

USGS Publications Warehouse

Weaver, J. Curtis

2006-01-01

A study of annual maximum precipitation frequency in Mecklenburg County, North Carolina, was conducted to characterize the frequency of precipitation at sites having at least 10 years of precipitation record. Precipitation-frequency studies provide information about the occurrence of precipitation amounts for given durations (for example, 1 hour or 24 hours) that can be expected to occur within a specified recurrence interval (expressed in years). In this study, annual maximum precipitation totals were determined for durations of 15 and 30 minutes; 1, 2, 3, 6, 12, and 24 hours; and for recurrence intervals of 2, 5, 10, 25, 50, 100, and 500 years. Precipitation data collected by the U.S. Geological Survey network of raingages in the city of Charlotte and Mecklenburg County were analyzed for this study. In September 2004, more than 70 precipitation sites were in operation; 27 of these sites had at least 10 years of record, which is the minimum record typically required in frequency studies. Missing record at one site, however, resulted in its removal from the dataset. Two datasets--the Charlotte Raingage Network (CRN) initial and CRN modified datasets--were developed from the U.S. Geological Survey data, which represented relatively short periods of record (10 and 11 years). The CRN initial dataset included very high precipitation totals from two storms that caused severe flooding in areas of the city and county in August 1995 and July 1997, which could significantly influence the statistical results. The CRN modified dataset excluded the highest precipitation totals from these two storms but included the second highest totals. More...

Quantifying precision of in situ length and weight measurements of fish

USGS Publications Warehouse

Gutreuter, S.; Krzoska, D.J.

1994-01-01

We estimated and compared errors in field-made (in situ) measurements of lengths and weights of fish. We made three measurements of length and weight on each of 33 common carp Cyprinus carpio, and on each of a total of 34 bluegills Lepomis macrochirus and black crappies Pomoxis nigromaculatus. Maximum total lengths of all fish were measured to the nearest 1 mm on a conventional measuring board. The bluegills and black crappies (85–282 mm maximum total length) were weighed to the nearest 1 g on a 1,000-g spring-loaded scale. The common carp (415–600 mm maximum total length) were weighed to the nearest 0.05 kg on a 20-kg spring-loaded scale. We present a statistical model for comparison of coefficients of variation of length (Cl ) and weight (Cw ). Expected Cl was near zero and constant across mean length, indicating that length can be measured with good precision in the field. Expected Cw decreased with increasing mean length, and was larger than expected Cl by 5.8 to over 100 times for the bluegills and black crappies, and by 3 to over 20 times for the common carp. Unrecognized in situ weighing errors bias the apparent content of unique information in weight, which is the information not explained by either length or measurement error. We recommend procedures to circumvent effects of weighing errors, including elimination of unnecessary weighing from routine monitoring programs. In situ weighing must be conducted with greater care than is common if the content of unique and nontrivial information in weight is to be correctly identified.

Presence of understory shrubs constrains carbon gain in sunflecks by advance-regeneration seedlings: evidence from Quercus Rubra seedling grouwing in understory forest patches with or without evergreen shrubs present

Treesearch

E.T. Nilsen; T.T. Lei; S.W. Semones

2009-01-01

We investigated whether dynamic photosynthesis of understory Quercus rubra L. (Fagaceae) seedlings can acclimate to the altered pattern of sunflecks in forest patches with Rhododendron maximum L. (Ericaceae), an understory evergreen shrub. Maximum photosynthesis (A) and total CO2 accumulated during lightflecks was greatest for 400-s lightflecks, intermediate for 150-s...

40 CFR 464.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... copper, lead, zinc, and total phenols. For non-continuous dischargers, annual average mass limitations....0771 0.0421 Lead (T) 0.0791 0.039 Zinc (T) 0.114 0.0431 Maximum for any 1 day Maximum for monthly average Annual average 1 (mg/l) 2 (mg/l) 2 Copper (T) 0.77 0.42 0.017 Lead (T) 0.79 0.39 0.022 Zinc (T) 1...

40 CFR 464.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... copper, lead, zinc, and total phenols. For non-continuous dischargers, annual average mass limitations....0771 0.0421 Lead (T) 0.0791 0.039 Zinc (T) 0.114 0.0431 Maximum for any 1 day Maximum for monthly average Annual average 1 (mg/l) 2 (mg/l) 2 Copper (T) 0.77 0.42 0.017 Lead (T) 0.79 0.39 0.022 Zinc (T) 1...

Additivity and maximum likelihood estimation of nonlinear component biomass models

Treesearch

David L.R. Affleck

2015-01-01

Since Parresol's (2001) seminal paper on the subject, it has become common practice to develop nonlinear tree biomass equations so as to ensure compatibility among total and component predictions and to fit equations jointly using multi-step least squares (MSLS) methods. In particular, many researchers have specified total tree biomass models by aggregating the...

7 CFR 52.3188 - Work sheet for dried prunes.

Code of Federal Regulations, 2014 CFR

2014-01-01

... maximum Total of all defects, including off-color 10 percent 15 percent No limit except as indicated below. Total of all defects, including off-color and poor texture 20 percent Poor texture, end cracks, skin or... material, insect infestation, decay But no more than 6 percent But no more than 8 percent End cracks,2 skin...

7 CFR 52.3188 - Work sheet for dried prunes.

Code of Federal Regulations, 2013 CFR

2013-01-01

... maximum Total of all defects, including off-color 10 percent 15 percent No limit except as indicated below. Total of all defects, including off-color and poor texture 20 percent Poor texture, end cracks, skin or... material, insect infestation, decay But no more than 6 percent But no more than 8 percent End cracks,2 skin...

77 FR 30280 - Clean Water Act Section 303(d): Withdrawal of Nine Total Maximum Daily Loads (TMDLs)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-22

... Chloride, Sulfate, and Total Dissolved Solids (TDS) for the Bayou de L'Outre Watershed in Arkansas. The EPA... pertaining to segments 08040202-006, -007, and -008 with respect to Chlorides, Sulfates and TDS. Public... as follows. Segment (Reach) Waterbody name Pollutant 08040202-006 Bayou de L'Outre.. Chloride...

40 CFR 1039.250 - What records must I keep and what reports must I send to EPA?

Code of Federal Regulations, 2010 CFR

2010-07-01

...-IGNITION ENGINES Certifying Engine Families § 1039.250 What records must I keep and what reports must I... a report describing the following information about engines you produced during the model year: (1) Report the total number of engines you produced in each engine family by maximum engine power, total...

21 CFR 320.31 - Applicability of requirements regarding an “Investigational New Drug Application.”

Code of Federal Regulations, 2010 CFR

2010-04-01

... patients where either the maximum single or total daily dose exceeds that specified in the labeling of the... application. (2) A multiple-dose study in normal subjects or patients where either the single or total daily... conducting the study, including any contract research organization, shall retain reserve samples of any test...

On the influence of the local maxima of total pressure on the current sheet stability to the kink-like (flapping) mode

NASA Astrophysics Data System (ADS)

Korovinskiy, D. B.; Erkaev, N. V.; Semenov, V. S.; Ivanov, I. B.; Kiehas, S. A.; Ryzhkov, I. I.

2018-02-01

The stability of the Fadeev-like current sheet with respect to transversally propagating kink-like perturbations (flapping mode) is considered in terms of two-dimensional linear magnetohydrodynamic numerical simulations. It is found that the current sheet is stable when the total pressure minimum is located in the sheet center and unstable when the maximum value is reached there. It is shown that an unstable spot of any size enforces the whole sheet to be unstable, though the increment of instability decreases with the reduction of the unstable domain. In unstable sheets, the dispersion curve of instability shows a good match with the double-gradient (DG) model prediction. Here, the typical growth rate (short-wavelength limit) is close to the DG estimate averaged over the unstable region. In stable configurations, the typical frequency matches the maximum DG estimate. The dispersion curve of oscillations demonstrates a local maximum at wavelength ˜0.7 sheet half-width, which is a new feature that is absent in simplified analytical solutions.

Remotely Sensed Northern Vegetation Response to Changing Climate: Growing Season and Productivity Perspective

NASA Technical Reports Server (NTRS)

Ganguly, S.; Park, Taejin; Choi, Sungho; Bi, Jian; Knyazikhin, Yuri; Myneni, Ranga

2016-01-01

Vegetation growing season and maximum photosynthetic state determine spatiotemporal variability of seasonal total gross primary productivity of vegetation. Recent warming induced impacts accelerate shifts on growing season and physiological status over Northern vegetated land. Thus, understanding and quantifying these changes are very important. Here, we first investigate how vegetation growing season and maximum photosynthesis state are evolved and how such components contribute on inter-annual variation of seasonal total gross primary productivity. Furthermore, seasonally different response of northern vegetation to changing temperature and water availability is also investigated. We utilized both long-term remotely sensed data to extract larger scale growing season metrics (growing season start, end and duration) and productivity (i.e., growing season summed vegetation index, GSSVI) for answering these questions. We find that regionally diverged growing season shift and maximum photosynthetic state contribute differently characterized productivity inter-annual variability and trend. Also seasonally different response of vegetation gives different view of spatially varying interaction between vegetation and climate. These results highlight spatially and temporally varying vegetation dynamics and are reflective of biome-specific responses of northern vegetation to changing climate.

Water and Temperature Stresses Impact Canola (Brassica napus L.) Fatty Acid, Protein, and Yield over Nitrogen and Sulfur.

PubMed

Hammac, W Ashley; Maaz, Tai M; Koenig, Richard T; Burke, Ian C; Pan, William L

2017-12-06

Interactive effects of weather and soil nutrient status often control crop productivity. An experiment was conducted to determine effects of nitrogen (N) and sulfur (S) fertilizer rate, soil water, and atmospheric temperature on canola (Brassica napus L.) fatty acid (FA), total oil, protein, and grain yield. Nitrogen and sulfur were assessed in a 4-yr study with two locations, five N rates (0, 45, 90, 135, and 180 kg ha -1 ), and two S rates (0 and 17 kg ha -1 ). Water and temperature were assessed using variability across 12 site-years of dryland canola production. Effects of N and S were inconsistent. Unsaturated FA, oleic acid, grain oil, protein, and theoretical maximum grain yield were highly related to water and temperature variability across the site-years. A nonlinear model identified water and temperature conditions that enabled production of maximum unsaturated FA content, oleic acid content, total oil, protein, and theoretical maximum grain yield. Water and temperature variability played a larger role than soil nutrient status on canola grain constituents and yield.

Operations and Maintenance April Newsletter | Poster

Cancer.gov

Summertime is coming and with it warmer temperatures, so get out there and enjoy it. The Operations and Maintenance (O&M) department has talented individuals dedicated to maintaining your air conditioning equipment for maximum efficiency. Our staff are always ready to address issues even in the dog days of summer. Please be assured that we are working diligently to keep you comfortable.

A multiple maximum scatter difference discriminant criterion for facial feature extraction.

PubMed

Song, Fengxi; Zhang, David; Mei, Dayong; Guo, Zhongwei

2007-12-01

Maximum scatter difference (MSD) discriminant criterion was a recently presented binary discriminant criterion for pattern classification that utilizes the generalized scatter difference rather than the generalized Rayleigh quotient as a class separability measure, thereby avoiding the singularity problem when addressing small-sample-size problems. MSD classifiers based on this criterion have been quite effective on face-recognition tasks, but as they are binary classifiers, they are not as efficient on large-scale classification tasks. To address the problem, this paper generalizes the classification-oriented binary criterion to its multiple counterpart--multiple MSD (MMSD) discriminant criterion for facial feature extraction. The MMSD feature-extraction method, which is based on this novel discriminant criterion, is a new subspace-based feature-extraction method. Unlike most other subspace-based feature-extraction methods, the MMSD computes its discriminant vectors from both the range of the between-class scatter matrix and the null space of the within-class scatter matrix. The MMSD is theoretically elegant and easy to calculate. Extensive experimental studies conducted on the benchmark database, FERET, show that the MMSD out-performs state-of-the-art facial feature-extraction methods such as null space method, direct linear discriminant analysis (LDA), eigenface, Fisherface, and complete LDA.

Cadmium, lead, tin, total mercury, and methylmercury in canned tuna commercialised in São Paulo, Brazil.

PubMed

de Paiva, Esther Lima; Morgano, Marcelo Antonio; Milani, Raquel Fernanda

2017-09-01

The objective of this work was to determine levels of inorganic contaminants in 30 samples of five commercial brands of canned tuna, acquired on the local market in Campinas, São Paulo, Brazil, in the year of 2015. Total mercury and methylmercury (MeHg+) were determined by atomic absorption with thermal decomposition and amalgamation; and cadmium, lead, and tin were determined by inductively coupled plasma optical emission spectrometry. Results indicated that 20% of the tuna samples surpassed limits determined by the Brazilian and European Commission legislation for cadmium; for lead, the maximum value found was 59 µg kg -1 and tin was not detected in any samples. The maximum values found for total Hg and MeHg+ were 261 and 258 µg kg -1 , respectively. As from the results obtained, it was estimated that the consumption of four cans per week (540 g) of tuna canned in water could surpass the provisional tolerable monthly intake for MeHg + by 100%.

Carbonyls in the metropolitan area of Mexico City: calculation of the total photolytic rate constants Kp(s(-1)) and photolytic lifetime (tau) of ambient formaldehyde and acetaldehyde.

PubMed

Báez, Armando P; Torres, Ma del Carmen B; García, Rocío M; Padilla, Hugo G

2002-01-01

A great number of studies on the ambient levels of formaldehyde and other carbonyls in the urban rural and maritime atmospheres have been published because of their chemical and toxicological characteristics, and adverse health effects. Due to their toxicological effects, it was considered necessary to measure these compounds at different sites in the metropolitan area of Mexico City, and to calculate the total rate of photolytic constants and the photolytic lifetime of formaldehyde and acetaldehyde. Four sites were chosen. Sampling was carried out at different seasons and atmospheric conditions. The results indicated that formaldehyde was the most abundant carbonyl, followed by acetone and acetaldehyde. Data sets obtained from the 4 sites were chosen to calculate the total rate of photolysis and the photolytic lifetime for formaldehyde and acetaldehyde. Maximum photolytic rate values were obtained at the maximum actinic fluxes, as was to be expected.

Effect of Vacuum Frying on Changes in Quality Attributes of Jackfruit (Artocarpus heterophyllus) Bulb Slices

PubMed Central

Bawa, A. S.; Raju, P. S.

2014-01-01

The effect of frying temperatures and durations on the quality of vacuum fried jackfruit (JF) chips was evaluated. Moisture content and breaking force of JF chips decreased with increase in frying temperature and time during vacuum frying whereas the oil content increased. The frying time for JF chips was found to be 30, 25, and 20 minutes at 80, 90, and 100°C, respectively. JF chips fried at higher temperature resulted in maximum shrinkage (48%). The lightness in terms of hunter L * value decreased significantly (P < 0.05) during frying. Sensory evaluation showed maximum acceptability for JF chips fried at 90°C for 25 min. Frying under vacuum at lower temperatures was found to retain bioactive compounds such as total phenolics, total flavonoids, and total carotenoids in JF chips. Almost 90% of carotenoids were lost from the samples after 30 min of frying at 100°C. PMID:26904648

Organochlorine insecticide residues in soil and earthworms in the Delhi area, India, August-October 1974

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yadav, D.V.; Mittal, P.K.; Agarwal, H.C.

1981-09-01

DDT residues in soil and earthworms from 50 sites in Delhi were monitored. DDT was detected in all but two samples each of soil and earthworms. Among DDT residues, p,p'-DDE was most common and was found in 48 samples each of soil and earthworms; p,p'-DDT was detected in only 43 soil samples and 46 earthworm samples. p,p'-TDE and o,p'-DDT were also present in smaller concentrations in 29 and 15 soil samples and in 43 and 25 earthworm samples, respectively. Maximum total DDT concentration of 2.6 ppm was detected in the soil from Durga Nagar in the vicinity of a DDTmore » factory. The highest concentration of 37.7 ppm total DDT in earthworms was also obtained from the same site. The maximum concentration factor found in the earthworms was 551. The total DDT concentration in the earthworms and soil showed significant correlation.« less

Potential Applications for AQUATOX

EPA Pesticide Factsheets

AQUATOX has a myriad of potential applications to water management issues and programs, including water quality criteria and standards, TMDLs (Total Maximum Daily Loads), and ecological risk assessments of aquatic systems.

AQUATOX Model Validation Reports

EPA Pesticide Factsheets

AQUATOX has a myriad of potential applications to water management issues and programs, including water quality criteria and standards, TMDLs (Total Maximum Daily Loads), and ecological risk assessments of aquatic systems.

Calculations of Flowfield About Indented Nosetips,

DTIC Science & Technology

1982-08-23

agreement is good. UNCLASSIFIED SECURITY CLASSIFICATION OF THIS PAOE(ft,. Date E -t. , - NSWC TR 82-286 FOREWORD A finite difference computer program has been...Specific heat at constant pressure and volume respectively e Total energy per unit volume E ,F,H,R,S,T Functions of U AHT, HT Error in total enthalpy and...total enthalpy respectively ijGrid index in E and n directions respectively SI Identity matrix J,K Maximum grid point in E and n directions respectively

40 CFR 421.303 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... pounds) of TiCl4 produced Chromium (total) 0.346 0.140 Lead 0.262 0.122 Nickel 0.515 0.346 Titanium 0.496... average mg/kg (pounds per million pounds) of TiCl4 produced Chromium (total) 0.385 0.156 Lead 0.291 0.135... Maximum for monthly average mg/kg (pounds per million pounds) of TiCl4 handled Chromium (total) 0.069 0...

40 CFR 421.303 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... pounds) of TiCl4 produced Chromium (total) 0.346 0.140 Lead 0.262 0.122 Nickel 0.515 0.346 Titanium 0.496... average mg/kg (pounds per million pounds) of TiCl4 produced Chromium (total) 0.385 0.156 Lead 0.291 0.135... Maximum for monthly average mg/kg (pounds per million pounds) of TiCl4 handled Chromium (total) 0.069 0...

40 CFR 421.303 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... pounds) of TiCl4 produced Chromium (total) 0.346 0.140 Lead 0.262 0.122 Nickel 0.515 0.346 Titanium 0.496... average mg/kg (pounds per million pounds) of TiCl4 produced Chromium (total) 0.385 0.156 Lead 0.291 0.135... Maximum for monthly average mg/kg (pounds per million pounds) of TiCl4 handled Chromium (total) 0.069 0...

Enhancing wastewater reuse by forward osmosis with self-diluted commercial fertilizers as draw solutes.

PubMed

Zou, Shiqiang; He, Zhen

2016-08-01

Using fertilizers as draw solutes in forward osmosis (FO) can accomplish wastewater reuse with elimination of recycling draw solute. In this study, three commercial fast-release all-purpose solid fertilizers (F1, F2 and F3) were examined as draw solutes in a submerged FO system for water extraction from either deionized (DI) water or the treated wastewater. Systematic optimizations were conducted to enhance water extraction performance, including operation modes, initial draw concentrations and in-situ chemical fouling control. In the mode of the active layer facing the feed (AL-F or FO), a maximum of 324 mL water was harvested using 1-M F1, which provided 41% of the water need for fertilizer dilution for irrigation. Among the three fertilizers, F1 containing a lower urea content was the most favored because of a higher water extraction and a lower reverse solute flux (RSF) of major nutrients. Using the treated wastewater as a feed solution resulted in a comparable water extraction performance (317 mL) to that of DI water in 72 h and a maximum water flux of 4.2 LMH. Phosphorus accumulation on the feed side was mainly due to the FO membrane solute rejection while total nitrogen and potassium accumulation was mainly due to RSF from the draw solute. Reducing recirculation intensity from 100 to 10 mL min(-1) did not obviously decrease water flux but significantly reduced the energy consumption from 1.86 to 0.02 kWh m(-3). These results have demonstrated the feasibility of using commercial solid fertilizers as draw solutes for extracting reusable water from wastewater, and challenges such as reverse solute flux will need to be further addressed. Copyright © 2016 Elsevier Ltd. All rights reserved.

Energy-efficient approach to minimizing the energy consumption in an extended job-shop scheduling problem

NASA Astrophysics Data System (ADS)

Tang, Dunbing; Dai, Min

2015-09-01

The traditional production planning and scheduling problems consider performance indicators like time, cost and quality as optimization objectives in manufacturing processes. However, environmentally-friendly factors like energy consumption of production have not been completely taken into consideration. Against this background, this paper addresses an approach to modify a given schedule generated by a production planning and scheduling system in a job shop floor, where machine tools can work at different cutting speeds. It can adjust the cutting speeds of the operations while keeping the original assignment and processing sequence of operations of each job fixed in order to obtain energy savings. First, the proposed approach, based on a mixed integer programming mathematical model, changes the total idle time of the given schedule to minimize energy consumption in the job shop floor while accepting the optimal solution of the scheduling objective, makespan. Then, a genetic-simulated annealing algorithm is used to explore the optimal solution due to the fact that the problem is strongly NP-hard. Finally, the effectiveness of the approach is performed smalland large-size instances, respectively. The experimental results show that the approach can save 5%-10% of the average energy consumption while accepting the optimal solution of the makespan in small-size instances. In addition, the average maximum energy saving ratio can reach to 13%. And it can save approximately 1%-4% of the average energy consumption and approximately 2.4% of the average maximum energy while accepting the near-optimal solution of the makespan in large-size instances. The proposed research provides an interesting point to explore an energy-aware schedule optimization for a traditional production planning and scheduling problem.

Tank 241-AZ-101 criticality assessment resulting from pump jet mixing: Sludge mixing simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Onishi, Y.; Recknagle, K.

Tank 241-AZ-101 (AZ-101) is one of 28 double-shell tanks located in the AZ farm in the Hanford Site`s 200 East Area. The tank contains a significant quantity of fissile materials, including an estimated 9.782 kg of plutonium. Before beginning jet pump mixing for mitigative purposes, the operations must be evaluated to demonstrate that they will be subcritical under both normal and credible abnormal conditions. The main objective of this study was to address a concern about whether two 300-hp pumps with four rotating 18.3-m/s (60-ft/s) jets can concentrate plutonium in their pump housings during mixer pump operation and cause amore » criticality. The three-dimensional simulation was performed with the time-varying TEMPEST code to determine how much the pump jet mixing of Tank AZ-101 will concentrate plutonium in the pump housing. The AZ-101 model predicted that the total amount of plutonium within the pump housing peaks at 75 g at 10 simulation seconds and decreases to less than 10 g at four minutes. The plutonium concentration in the entire pump housing peaks at 0.60 g/L at 10 simulation seconds and is reduced to below 0.1 g/L after four minutes. Since the minimum critical concentration of plutonium is 2.6 g/L, and the minimum critical plutonium mass under idealized plutonium-water conditions is 520 g, these predicted maximums in the pump housing are much lower than the minimum plutonium conditions needed to reach a criticality level. The initial plutonium maximum of 1.88 g/L still results in safety factor of 4.3 in the pump housing during the pump jet mixing operation.« less

Exhaust-Gas Pressure and Temperature Survey of F404-GE-400 Turbofan Engine

NASA Technical Reports Server (NTRS)

Walton, James T.; Burcham, Frank W., Jr.

1986-01-01

An exhaust-gas pressure and temperature survey of the General Electric F404-GE-400 turbofan engine was conducted in the altitude test facility of the NASA Lewis Propulsion System Laboratory. Traversals by a survey rake were made across the exhaust-nozzle exit to measure the pitot pressure and total temperature. Tests were performed at Mach 0.87 and a 24,000-ft altitude and at Mach 0.30 and a 30,000-ft altitude with various power settings from intermediate to maximum afterburning. Data yielded smooth pressure and temperature profiles with maximum jet temperatures approximately 1.4 in. inside the nozzle edge and maximum jet temperatures from 1 to 3 in. inside the edge. A low-pressure region located exactly at engine center was noted. The maximum temperature encountered was 3800 R.

Impaired Waters and TMDLs

EPA Pesticide Factsheets

The 303(d) program provides guidance and technical resources to assist States in submitting lists of impaired waterbodies and the development of Total Maximum Daily Loads of the pollutant causing the impairment.

Estimation Methods for Non-Homogeneous Regression - Minimum CRPS vs Maximum Likelihood

NASA Astrophysics Data System (ADS)

Gebetsberger, Manuel; Messner, Jakob W.; Mayr, Georg J.; Zeileis, Achim

2017-04-01

Non-homogeneous regression models are widely used to statistically post-process numerical weather prediction models. Such regression models correct for errors in mean and variance and are capable to forecast a full probability distribution. In order to estimate the corresponding regression coefficients, CRPS minimization is performed in many meteorological post-processing studies since the last decade. In contrast to maximum likelihood estimation, CRPS minimization is claimed to yield more calibrated forecasts. Theoretically, both scoring rules used as an optimization score should be able to locate a similar and unknown optimum. Discrepancies might result from a wrong distributional assumption of the observed quantity. To address this theoretical concept, this study compares maximum likelihood and minimum CRPS estimation for different distributional assumptions. First, a synthetic case study shows that, for an appropriate distributional assumption, both estimation methods yield to similar regression coefficients. The log-likelihood estimator is slightly more efficient. A real world case study for surface temperature forecasts at different sites in Europe confirms these results but shows that surface temperature does not always follow the classical assumption of a Gaussian distribution. KEYWORDS: ensemble post-processing, maximum likelihood estimation, CRPS minimization, probabilistic temperature forecasting, distributional regression models

Delimitation of homogeneous regions in the UNIFESP/EPM healthcare center coverage area based on sociodemographic indicators.

PubMed

Harada, K Y; Silva, J G; Schenkman, S; Hayama, E T; Santos, F R; Prado, M C; Pontes, R H

1999-01-07

The drawing up of adequate Public Health action planning to address the true needs of the population would increase the chances of effectiveness and decrease unnecessary expenses. To identify homogeneous regions in the UNIFESP/EPM healthcare center (HCC) coverage area based on sociodemographic indicators and to relate them to causes of deaths in 1995. Secondary data analysis. HCC coverage area; primary care. Sociodemographic indicators were obtained from special tabulations of the Demographic Census of 1991. Proportion of children and elderly in the population; family providers' education level (maximum: > 15 years, minimum: < 1 year) and income level (maximum: > 20 minimum wages, minimum: < 1 minimum wage); proportional mortality distribution The maximum income permitted the construction of four homogeneous regions, according to income ranking. Although the proportion of children and of elderly did not vary significantly among the regions, minimum income and education showed a statistically significant (p < 0.05) difference between the first region (least affluent) and the others. A clear trend of increasing maximum education was observed across the regions. Mortality also differed in the first region, with deaths generated by possibly preventable infections. The inequalities observed may contribute to primary health prevention.

Maximizing Total QoS-Provisioning of Image Streams with Limited Energy Budget

NASA Astrophysics Data System (ADS)

Lee, Wan Yeon; Kim, Kyong Hoon; Ko, Young Woong

To fully utilize the limited battery energy of mobile electronic devices, we propose an adaptive adjustment method of processing quality for multiple image stream tasks running with widely varying execution times. This adjustment method completes the worst-case executions of the tasks with a given budget of energy, and maximizes the total reward value of processing quality obtained during their executions by exploiting the probability distribution of task execution times. The proposed method derives the maximum reward value for the tasks being executable with arbitrary processing quality, and near maximum value for the tasks being executable with a finite number of processing qualities. Our evaluation on a prototype system shows that the proposed method achieves larger reward values, by up to 57%, than the previous method.

Suspended-sediment and nutrient loads for Waiakea and Alenaio Streams, Hilo, Hawaii, 2003-2006

USGS Publications Warehouse

Presley, Todd K.; Jamison, Marcael T.J.; Nishimoto, Dale C.

2008-01-01

Suspended sediment and nutrient samples were collected during wet-weather conditions at three sites on two ephemeral streams in the vicinity of Hilo, Hawaii during March 2004 to March 2006. Two sites were sampled on Waiakea Stream at 80- and 860-foot altitudes during March 2004 to August 2005. One site was sampled on Alenaio Stream at 10-foot altitude during November 2005 to March 2006. The sites were selected to represent different land uses and land covers in the area. Most of the drainage area above the upper Waiakea Stream site is conservation land. The drainage areas above the lower site on Waiakea Stream, and the site on Alenaio Stream, are a combination of conservation land, agriculture, rural, and urban land uses. In addition to the sampling, continuous-record streamflow sites were established at the three sampling sites, as well as an additional site on Alenaio Stream at altitude of 75 feet and 0.47 miles upstream from the sampling site. Stage was measured continuously at 15-minute intervals at these sites. Discharge, for any particular instant, or for selected periods of time, were computed based on a stage-discharge relation determined from individual discharge measurements. Continuous records of discharge were computed at the two sites on Waiakea Stream and the upper site on Aleniao Stream. Due to non-ideal hydraulic conditions within the channel of Alenaio Stream, a continuous record of discharge was not computed at the lower site on Alenaio Stream where samples were taken. Samples were analyzed for suspended sediment, and the nutrients total nitrogen, dissolved nitrite plus nitrate, and total phosphorus. Concentration data were converted to instantaneous load values: loads are the product of discharge and concentration, and are presented as tons per day for suspended sediment or pounds per day for nutrients. Daily-mean loads were computed by estimating concentrations relative to discharge using graphical constituent loading analysis techniques. Daily-mean loads were computed at the two Waiakea Stream sampling sites for the analyzed constituents, during the period October 1, 2003 to September 30, 2005. No record of daily-mean load was computed for the Alenaio Stream sampling site due to the problems with computing a discharge record. The maximum daily-mean loads for the upper site on Waiakea Stream for suspended sediment was 79 tons per day, and the maximum daily-mean loads for total nitrogen, dissolved nitrite plus nitrate, and total phosphorus were 1,350, 13, and 300 pounds per day, respectively. The maximum daily-mean loads for the lower site on Waiakea Stream for suspended sediment was 468 tons per day, and the maximum daily-mean loads for total nitrogen, nitrite plus nitrate, and total phosphorus were 913, 8.5, and 176 pounds per day, respectively. From the estimated continuous daily-mean load record, all of the maximum daily-mean loads occurred during October 2003 and September 2004, except for suspended sediment load for the lower site, which occurred on September 15, 2005. Maximum values were not all caused by a single storm event. Overall, the record of daily-mean loads showed lower loads during storm events for suspended sediments and nutrients at the downstream site of Waiakea Stream during 2004 than at the upstream site. During 2005, however, the suspended sediment loads were higher at the downstream site than the upstream site. Construction of a flood control channel between the two sites in 2005 may have contributed to the change in relative suspended-sediment loads.

Diesel engine fuel consumption and emission analysis using steam generated non-surfactant water-in-diesel emulsion fuel

NASA Astrophysics Data System (ADS)

Avianto Sugeng, Dhani; Zahari, Mohamad Fathur Hafeezat Mohd; Muhsin Ithnin, Ahmad; Jazair Yahya, Wira

2017-10-01

Efforts in making water in diesel emulsion (W/D) with the absence of surfactant have been developed to address the issues of long-term stability and the dependence on surfactants. This paper discusses an alternative formation method of a non-surfactant W/D, e.g. by steam condensation. By injecting steam into a batch of colder diesel fuel, fine water droplets are formed and suspended in the fuel forming an emulsion. The droplets are confirmed to be in the size range of hundreds of nanometers. The emissions of NOx is reduced by a maximum of 71%, whereas the CO and UHC emissions are increased by maximum respectively 180% and a surprising 517%. Not less interesting is the lower BSFC which was measured at a maximum reduction of 18.4%. These results on emission analysis together with the brake specific fuel consumption confirm this method to resemble the combustion behaviour of a conventional emulsion fuel of lower NOx and BSFC, yet higher CO and UHC

Algorithms of maximum likelihood data clustering with applications

NASA Astrophysics Data System (ADS)

Giada, Lorenzo; Marsili, Matteo

2002-12-01

We address the problem of data clustering by introducing an unsupervised, parameter-free approach based on maximum likelihood principle. Starting from the observation that data sets belonging to the same cluster share a common information, we construct an expression for the likelihood of any possible cluster structure. The likelihood in turn depends only on the Pearson's coefficient of the data. We discuss clustering algorithms that provide a fast and reliable approximation to maximum likelihood configurations. Compared to standard clustering methods, our approach has the advantages that (i) it is parameter free, (ii) the number of clusters need not be fixed in advance and (iii) the interpretation of the results is transparent. In order to test our approach and compare it with standard clustering algorithms, we analyze two very different data sets: time series of financial market returns and gene expression data. We find that different maximization algorithms produce similar cluster structures whereas the outcome of standard algorithms has a much wider variability.

Ground-water quality for Grainger County, Tennessee

USGS Publications Warehouse

Weaver, J.D.; Patel, A.R.; Hickey, A.C.

1994-01-01

The residents of Grainger County depend on ground water for many of their daily needs including personal consumption and crop irrigation. To address concerns associated with ground-water quality related to domestic use, the U.S. Geological Survey collected water samples from 35 wells throughout the county during the summer 1992. The water samples were analyzed to determine if pesticides, nutrients, bacteria, and other selected constituents were present in the ground water. Wells selected for the study were between 100 and 250 feet deep and yielded 10 to 50 gallons of water per minute. Laboratory analyses of the water found no organic pesticides at concentrations exceeding the primary maximum contaminant levels established by the State of Tennessee for wells used for public supply. However, fecal coliform bacteria were detected at concentrations exceeding the State's maximum contaminant level in water from 15 of the 35 wells sampled. Analyses also indicated several inorganic compounds were present in the water samples at concentrations exceeding the secondary maximum contaminant level.

Phylogeny of Salsoleae s.l. (Chenopodiaceae) based on DNA sequence data from ITS, psbB-psbH, and rbcL, with emphasis on taxa of northwestern China

Treesearch

Zhi-Bin Wen; Ming-Li Zhang; Ge-Lin Zhu; Stewart C. Sanderson

2010-01-01

To reconstruct phylogeny and verify the monophyly of major subgroups, a total of 52 species representing almost all species of Salsoleae s.l. in China were sampled, with analysis based on three molecular markers (nrDNA ITS, cpDNA psbB-psbH and rbcL), using maximum parsimony, maximum likelihood, and Bayesian inference methods. Our molecular evidence provides strong...

40 CFR 421.252 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/troy ounce of gold and silver smelted Lead 0.546 0.260 Mercury 0.325 0.130 Silver 0.533 0.221 Zinc 1.898 0.793 Gold 0.130 Oil....164 0.068 Zinc 0.584 0.244 Gold 0.040 Oil and grease 8.000 4.800 Total suspended solids 16.400 7.800 p...

40 CFR 421.252 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/troy ounce of gold and silver smelted Lead 0.546 0.260 Mercury 0.325 0.130 Silver 0.533 0.221 Zinc 1.898 0.793 Gold 0.130 Oil....164 0.068 Zinc 0.584 0.244 Gold 0.040 Oil and grease 8.000 4.800 Total suspended solids 16.400 7.800 p...

40 CFR 421.252 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/troy ounce of gold and silver smelted Lead 0.546 0.260 Mercury 0.325 0.130 Silver 0.533 0.221 Zinc 1.898 0.793 Gold 0.130 Oil....164 0.068 Zinc 0.584 0.244 Gold 0.040 Oil and grease 8.000 4.800 Total suspended solids 16.400 7.800 p...

Mechanical and Physical Properties of ASTM C33 Sand

DTIC Science & Technology

2008-02-01

ERDC/GSL TR-08-2 7 Grain-size Distribution (1) (ASTM D 422) 1 test run on total sand sample Proctor Density Curves (2) (ASTM D 698 and D... Proctor (Figure 4). Because of the noncohesive nature of the SP material, a series of relative density tests measuring both minimum and maximum... density tests were conducted with moisture added to the sand. A summary of the minimum and maximum densities is given in Table 2. During Proctor

Egg parasitoids of Sophonia rufofascia (Homoptera: Cicadellidae) in Hawaii Volcanoes National Park

USGS Publications Warehouse

Johnson, M.T.; Yang, P.; Huber, J.T.; Jones, V.P.

2001-01-01

Parasitism of the leafhopper Sophonia rufofascia (Kuoh and Kuoh), a recent immigrant that has become a widespread pest in Hawaii, was examined in a 1-year survey in Hawaii Volcanoes National Park. Samples of young leaves of four plant species infested with eggs of S. rufofascia were collected at five sites ranging from 880 to 1190 m in elevation. Leafhopper eggs were parasitized principally by three species of Mymaridae (Hymenoptera): Polynema sp., Schizophragma sp. probably bicolor (Dozier), and Chaetomymar sp. Although parasitism by each species fluctuated at levels usually below 10%, all three were detected consistently across most host plants, sites, and sample periods. Total parasitism differed at a marginally significant level among host plants and sites, but not among sample periods. Total parasitism averaged 14.3% (maximum: 26.3%) on Dodonaea viscosa Jacquin, 10.6% (maximum: 17.5%) on Myrica faya Aiton, 8.7% (maximum: 29.5%) on Metrosideros polymorpha Gaudich-Beaupre, and 1.6% (maximum: 4.3%) on Vaccinium reticulatum Smith. Parasitism was generally higher at sites lower in elevation. Further monitoring is recommended to determine whether parasitism will increase to levels that can effectively suppress S. rufofascia populations. The efficacy of natural enemies already present in Hawaii is important because concern over nontarget impacts on endemic leafhoppers makes introduction of new biological control agents difficult. ?? 2001 Academic Press.

Functional independence of Taiwanese children with Prader-Willi syndrome.

PubMed

Lee, Chung-Lin; Lin, Hsiang-Yu; Tsai, Li-Ping; Chiu, Huei-Ching; Tu, Ru-Yi; Huang, You-Hsin; Chien, Yin-Hsiu; Lee, Ni-Chung; Niu, Dau-Ming; Chao, Mei-Chyn; Tsai, Fuu-Jen; Chou, Yen-Yin; Chuang, Chih-Kuang; Lin, Shuan-Pei

2018-06-01

Prader-Willi syndrome (PWS) is a genetic disorder with obesity, developmental delay, short stature, and behavioral abnormalities. The study aimed to assess the functional independence in children with PWS. The Functional Independence Measure for Children (WeeFIM) was used to evaluate 81 children with PWS (44 boys and 37 girls) with a median age of 11 years 1 month (range 2 years 8 months to 20 years 2 months) were recruited between January 2013 and December 2016. The mean total WeeFIM score was 103.8 (maximum 126). Sixty-five patients (80%) had deletion type PWS, 16 (20.0%) had nondeletion type. The scores were 103.6 ± 18.5 for deletion and 104.8 ± 18.3 for nondeletion type (p = .405), 104.8 ± 19.3 in boys and 102.6 ± 17.3 in girls (p = .293). The mean self-care, mobility, and cognition scores were 47 (maximum 56), 33 (maximum 35), and 24 (maximum 35), respectively. All total scores and 18 subscores in the three functional domains were positively correlated with age (p < .05). Most children required assistance in problem-solving, comprehension, and expression. The WeeFIM identified the strengths and limitations of children with PWS and confirmed that support and supervision were needed in cognitive and self-care tasks. © 2018 Wiley Periodicals, Inc.

Influence of hypernatraemia and urea excretion on the ability to excrete a maximally hypertonic urine in the rat

PubMed Central

Cheema-Dhadli, Surinder; Halperin, Mitchell L

2002-01-01

Rats normally excrete 20-25 mmol of sodium (Na+) + potassium (K+) per kilogram per day. To minimize the need for a large water intake, they must excrete urine with a very high electrolyte concentration (tonicity). Our objective was to evaluate two potential factors that could influence the maximum urine tonicity, hypernatraemia and the rate of urea excretion. Balance studies were carried out in vasopressin-treated rats fed a low-electrolyte diet. In the first series, the drinking solution contained an equivalent sodium chloride (NaCl) load at 150 or 600 mmol l−1. In the second series, the maximum urine tonicity was evaluated in rats consuming 600 mmol l−1 NaCl with an 8-fold range of urea excretion. Hypernatraemia (148 ± 1 mmol l−1) developed in all rats that drank 600 mmol l−1 saline. Although the rate of Na+ + K+ excretion was similar in both saline groups, the maximum urine total cation concentration was significantly higher in the hypernatraemic group (731 ± 31 vs. 412 ± 37 mmol l−1). Only when the rate of excretion of urea was very low, was there a further increase in the maximum urine total cation concentration (1099 ± 118 mmol l−1). Thus hypernatraemia was the most important factor associated with a higher urine tonicity. PMID:12068051

Analysis of beta-lactam antibiotics in incurred raw milk by rapid test methods and liquid chromatography coupled with electrospray ionization tandem mass spectrometry.

PubMed

Riediker, S; Diserens, J M; Stadler, R H

2001-09-01

A recently developed confirmatory LC-MS method has been applied to the quantification of five major beta-lactam antibiotics in suspect raw bovine milk samples that gave a positive response with receptor-based (BetaStar) and rapid microbial inhibitory screen tests (Delvotest SP). In total, 18 presumptive positive raw milk samples were reanalyzed; 16 samples showed traces of antibiotic residues that could be identified and quantified by the LC-MS method, ranging from the limits of confirmation up to 38 microg/kg. Of the positive samples, only five (approximately 30%) were found to be violative of EU maximum residue limits. The most frequently detected antibiotic residues were cloxacillin and penicillin G, the former often in combination with amoxicillin or ampicillin. This study compares the results obtained by the three methods on identical samples and addresses how these relate to certain criteria such as sensitivity and selectivity. Furthermore, the limitations of the LC-MS method and the potential impact of the presence of frequently more than one residue in the same milk sample on the response of the rapid test methods are discussed.

Pareto-optimal phylogenetic tree reconciliation

PubMed Central

Libeskind-Hadas, Ran; Wu, Yi-Chieh; Bansal, Mukul S.; Kellis, Manolis

2014-01-01

Motivation: Phylogenetic tree reconciliation is a widely used method for reconstructing the evolutionary histories of gene families and species, hosts and parasites and other dependent pairs of entities. Reconciliation is typically performed using maximum parsimony, in which each evolutionary event type is assigned a cost and the objective is to find a reconciliation of minimum total cost. It is generally understood that reconciliations are sensitive to event costs, but little is understood about the relationship between event costs and solutions. Moreover, choosing appropriate event costs is a notoriously difficult problem. Results: We address this problem by giving an efficient algorithm for computing Pareto-optimal sets of reconciliations, thus providing the first systematic method for understanding the relationship between event costs and reconciliations. This, in turn, results in new techniques for computing event support values and, for cophylogenetic analyses, performing robust statistical tests. We provide new software tools and demonstrate their use on a number of datasets from evolutionary genomic and cophylogenetic studies. Availability and implementation: Our Python tools are freely available at www.cs.hmc.edu/∼hadas/xscape. Contact: mukul@engr.uconn.edu Supplementary information: Supplementary data are available at Bioinformatics online. PMID:24932009

The emotional eating and negative food relationship experiences of obese and overweight adults.

PubMed

Ford, Tasha; Lee, HeeSoon; Jeon, MinJeong

2017-07-01

Overweight and obesity pose serious public health problems, affecting 68.8% of Americans. Previous research indicated that psychological factors played important roles in an individual's motivation to consume food. In particular, emotional eating, defined as overeating in response to negative affect, has received particular attention as a risk factor for obesity. This study explored and addressed the emotional factors involved in the development of emotional eating. A total of 10 Midwestern American male and female adults, previously diagnosed as medically overweight and obese, were recruited via online and print advertisement using maximum variation and snowball sampling methods. Using a semi-structured, face-to-face interview format, participants shared their perspectives about the development and persistence of emotional eating. The interviews were transcribed and Atlas.ti software was used to assist in thematic analysis of emotional eating. Study results yielded themes, such as emotional triggers, food cravings, comfort from foods, mindless eating, and childhood experiences. Findings indicated that participants generally lacked emotional self-care, but desired to decrease their emotional eating behaviors. Implications are discussed to construct creative, evidence-based treatments for the overweight and obese emotional eaters.

Pucksat Payload Carrier

NASA Technical Reports Server (NTRS)

Milam, M. Bruce; Young, Joseph P.

1999-01-01

There is an ever-expanding need to provide economical space launch opportunities for relatively small science payloads. To address this need, a team at NASA's Goddard Space Flight Center has designed the Pucksat. The Pucksat is a highly versatile payload carrier structure compatible for launching on a Delta II two-stage vehicle as a system co-manifested with a primary payload. It is also compatible for launch on the Air Force Medium Class EELV. Pucksat's basic structural architecture consists of six honeycomb panels attached to six longerons in a hexagonal manner and closed off at the top and bottom with circular rings. Users may configure a co-manifested Pucksat in a number of ways. As examples, co-manifested configurations can be designed to accommodate dedicated missions, multiple experiments, multiple small deployable satellites, or a hybrid of the preceding examples. The Pucksat has fixed lateral dimensions and a downward scaleable height. The dimension across the panel hexagonal flats is 62 in. and the maximum height configuration dimension is 38.5 in. Pucksat has been designed to support a 5000 lbm primary payload, with the center of gravity located no greater than 60 in. from its separation plane, and to accommodate a total co-manifested payload mass of 1275 lbm.

How to securely replicate services (preliminary version)

NASA Technical Reports Server (NTRS)

Reiter, Michael; Birman, Kenneth

1992-01-01

A method is presented for constructing replicated services that retain their availability and integrity despite several servers and clients being corrupted by an intruder, in addition to others failing benignly. More precisely, a service is replicated by 'n' servers in such a way that a correct client will accept a correct server's response if, for some prespecified parameter, k, at least k servers are correct and fewer than k servers are correct. The issue of maintaining causality among client requests is also addressed. A security breach resulting from an intruder's ability to effect a violation of causality in the sequence of requests processed by the service is illustrated. An approach to counter this problem is proposed that requires that fewer than k servers are corrupt and, to ensure liveness, that k is less than or = n - 2t, where t is the assumed maximum total number of both corruptions and benign failures suffered by servers in any system run. An important and novel feature of these schemes is that the client need not be able to identify or authenticate even a single server. Instead, the client is required only to possess at most two public keys for the service.

Configuration of multiple human stressors and their impacts on fish assemblages in Alpine river basins of Austria.

PubMed

Schinegger, Rafaela; Pucher, Matthias; Aschauer, Christiane; Schmutz, Stefan

2018-03-01

This work addresses multiple human stressors and their impacts on fish assemblages of the Drava and Mura rivers in southern Austria. The impacts of single and multiple human stressors on riverine fish assemblages in these basins were disentangled, based on an extensive dataset. Stressor configuration, i.e. various metrics of multiple stressors belonging to stressor groups hydrology, morphology, connectivity and water quality were investigated for the first time at river basin scale in Austria. As biological response variables, the Fish Index Austria (FIA) and its related single as well as the WFD biological- and total state were investigated. Stressor-response analysis shows divergent results, but a general trend of decreasing ecological integrity with increasing number of stressors and maximum stressor is observed. Fish metrics based on age structure, fish region index and biological status responded best to single stressors and/or their combinations. The knowledge gained in this work provides a basis for advanced investigations in Alpine river basins and beyond, supports WFD implementation and helps prioritizing further actions towards multi-stressor restoration- and management. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Semester and Event-Specific Motives for Alcohol Use During Spring Break: Associated Protective Strategies and Negative Consequences

PubMed Central

Patrick, Megan E.; Lewis, Melissa A.; Lee, Christine M.; Maggs, Jennifer L.

2012-01-01

Motives surrounding alcohol use behavior are important for understanding college student drinking. However, no previous research has addressed how motives for and against drinking during specific events associated with high-risk drinking, such as Spring Break, may differ from motives for and against drinking during the regular semester. Further, we examine the extent to which semester and Spring Break motives are associated with alcohol use, protective behavioral strategies (PBS), and consequences. Participants were college students (N = 261; 55% women) who provided data both immediately prior to (Wave 1) and after (Wave 2) Spring Break. Fun/Social motives for drinking were greater for Spring Break, and Driving motives against drinking were lower for Spring Break, compared to semester drinking. Relax and Image motives for drinking and Physical/Behavioral motives for not drinking during Spring Break did not differ from semester motives. Spring Break motives for and against drinking were associated with total drinks, maximum drinks, PBS, and experienced negative consequences during Spring Break. Students’ specific motives regarding drinking during Spring Break predict high-risk drinking and may be utilized in creating salient event-specific interventions. PMID:23384451

Maximum entropy, fluctuations and priors

NASA Astrophysics Data System (ADS)

Caticha, A.

2001-05-01

The method of maximum entropy (ME) is extended to address the following problem: Once one accepts that the ME distribution is to be preferred over all others, the question is to what extent are distributions with lower entropy supposed to be ruled out. Two applications are given. The first is to the theory of thermodynamic fluctuations. The formulation is exact, covariant under changes of coordinates, and allows fluctuations of both the extensive and the conjugate intensive variables. The second application is to the construction of an objective prior for Bayesian inference. The prior obtained by following the ME method to its inevitable conclusion turns out to be a special case (α=1) of what are currently known under the name of entropic priors. .

Growth of lodgepole pine thinned to various densities on two sites with differing productivities in central Oregon.

Treesearch

P.H. Cochran; Walter G. Dahms

2000-01-01

Concave curvilinear decreases in diameter growth occurred with increasing stand densities. A convex curvilinear increase in gross growth of basal area and total cubic volume took place with increasing stand density. Maximum cumulative net cubic (total and merchantable) and board-foot yields varied curvilinearly with stand density. These yields peaked at intermediate...

40 CFR 60.44c - Compliance and performance test methods and procedures for sulfur dioxide.

Code of Federal Regulations, 2010 CFR

2010-07-01

... = Fraction of the total heat input from fuel combustion derived from coal and oil, as determined by... total heat input from fuel combustion derived from coal and oil, as determined by applicable procedures... generating unit load during the 30-day period does not have to be the maximum design heat input capacity, but...

Prehydrolysis of aspen wood with water and with dilute aqueous sulfuric acid

Treesearch

Edward L. Springer; John F. Harris

1982-01-01

Water prehydrolysis of aspen wood was compared with 0.40% sulfuric acid prehydrolysis at a reaction temperature of 170°C. Acid prehydrolysis gave much higher yields of total anhydroxylose units in the prehydrolyzate and removed significantly less anhydroglucose from the wood than did the water treatment. At maximum yields of total anhydroxylose units in the...

Classic maximum entropy recovery of the average joint distribution of apparent FRET efficiency and fluorescence photons for single-molecule burst measurements.

PubMed

DeVore, Matthew S; Gull, Stephen F; Johnson, Carey K

2012-04-05

We describe a method for analysis of single-molecule Förster resonance energy transfer (FRET) burst measurements using classic maximum entropy. Classic maximum entropy determines the Bayesian inference for the joint probability describing the total fluorescence photons and the apparent FRET efficiency. The method was tested with simulated data and then with DNA labeled with fluorescent dyes. The most probable joint distribution can be marginalized to obtain both the overall distribution of fluorescence photons and the apparent FRET efficiency distribution. This method proves to be ideal for determining the distance distribution of FRET-labeled biomolecules, and it successfully predicts the shape of the recovered distributions.

Shear, principal, and equivalent strains in equal-channel angular deformation

NASA Astrophysics Data System (ADS)

Xia, K.; Wang, J.

2001-10-01

The shear and principal strains involved in equal channel angular deformation (ECAD) were analyzed using a variety of methods. A general expression for the total shear strain calculated by integrating infinitesimal strain increments gave the same result as that from simple geometric considerations. The magnitude and direction of the accumulated principal strains were calculated based on a geometric and a matrix algebra method, respectively. For an intersecting angle of π/2, the maximum normal strain is 0.881 in the direction at π/8 (22.5 deg) from the longitudinal direction of the material in the exit channel. The direction of the maximum principal strain should be used as the direction of grain elongation. Since the principal direction of strain rotates during ECAD, the total shear strain and principal strains so calculated do not have the same meaning as those in a strain tensor. Consequently, the “equivalent” strain based on the second invariant of a strain tensor is no longer an invariant. Indeed, the equivalent strains calculated using the total shear strain and that using the total principal strains differed as the intensity of deformation increased. The method based on matrix algebra is potentially useful in mathematical analysis and computer calculation of ECAD.

The daytime course of total ozone content caused by cloud convection

NASA Technical Reports Server (NTRS)

Ishov, Alexander G.

1994-01-01

Presented are the experimental data on the daytime course of the total O3 and SO2 content obtained by Brewer 044 spectrophotometer in the tropics (Thumba, India, 8.53 N, 76.87 W, March-May 1990) and at middle latitudes (Obninsk, Russia, 55.12 N, 36.6 W, May-October 1991) of the Northern Hemisphere. The analysis showed that under fine warm weather conditions without precipitation (air mass change and frontal passage were not observed during several days) in days with well-developed convective clouds (cloudless morning, convective clouds in the daytime, no clouds in the evening) there is a typical nearly symmetric (with respect to local noon) course of the total O3 (with the minimum at about local noon) and SO2 (with the maximum at about local noon) content. The minimum depth is about 2-5 percent of the average daytime values of the total ozone content. The synchronous measurements of pressure pulsations with microbarograph (they are the indicator of convective and turbulent motion development in the lower subcloud atmospheric layer) showed that during these days there is a nearly symmetric course of pressure pulsations with the maximum at about local noon.

[Effects of population density and culture volume on the growth and reproduction of Moina irrasa].

PubMed

Chen, Li-Na; Li, Yu-Ying; Deng, Dao-Gui; Jin, Xian-Wen; Ge, Qian; Wang, Shao-Qin

2012-07-01

A laboratory experiment was conducted to study the effects of different population density (D1 : 100 ind x L(-1), D2 : 150 ind x L(-1), D3 : 300 ind x L(-1)) and culture volume (V1: 50 mL, V2 : 100 mL, V3 : 400 mL) on the growth and reproduction of Moina irrasa at 25 degrees C. At the same culture density, the body length of the M. irrasa females at their first pregnancy, the first brood, and the total offsprings per female decreased with the increase of culture volumes, while the sex ratio (male/female) of the offsprings was in adverse. At the same culture volumes, the total offsprings per female decreased with the increase of culture density. At D1 V1, the body length of the females at their first pregnancy (0.95 +/- 0.10 mm) and the total offsprings (171.3 +/- 19.8 ind) per female were the maximum. At D3V2, the sex ratio was the maximum (0.54 +/- 0.05). Culture density, culture volume, and their interactions significantly affected the total offsprings per female and the sex ratio (P < 0.001).

Bayesian dose selection design for a binary outcome using restricted response adaptive randomization.

PubMed

Meinzer, Caitlyn; Martin, Renee; Suarez, Jose I

2017-09-08

In phase II trials, the most efficacious dose is usually not known. Moreover, given limited resources, it is difficult to robustly identify a dose while also testing for a signal of efficacy that would support a phase III trial. Recent designs have sought to be more efficient by exploring multiple doses through the use of adaptive strategies. However, the added flexibility may potentially increase the risk of making incorrect assumptions and reduce the total amount of information available across the dose range as a function of imbalanced sample size. To balance these challenges, a novel placebo-controlled design is presented in which a restricted Bayesian response adaptive randomization (RAR) is used to allocate a majority of subjects to the optimal dose of active drug, defined as the dose with the lowest probability of poor outcome. However, the allocation between subjects who receive active drug or placebo is held constant to retain the maximum possible power for a hypothesis test of overall efficacy comparing the optimal dose to placebo. The design properties and optimization of the design are presented in the context of a phase II trial for subarachnoid hemorrhage. For a fixed total sample size, a trade-off exists between the ability to select the optimal dose and the probability of rejecting the null hypothesis. This relationship is modified by the allocation ratio between active and control subjects, the choice of RAR algorithm, and the number of subjects allocated to an initial fixed allocation period. While a responsive RAR algorithm improves the ability to select the correct dose, there is an increased risk of assigning more subjects to a worse arm as a function of ephemeral trends in the data. A subarachnoid treatment trial is used to illustrate how this design can be customized for specific objectives and available data. Bayesian adaptive designs are a flexible approach to addressing multiple questions surrounding the optimal dose for treatment efficacy within the context of limited resources. While the design is general enough to apply to many situations, future work is needed to address interim analyses and the incorporation of models for dose response.

Determination of variations of the solar radius from solar eclipse observations

NASA Technical Reports Server (NTRS)

Sofia, S.; Dunham, D. W.; Fiala, A. D.

1980-01-01

This paper describes the method to determine the solar radius and its variations from observations made during total solar eclipses. In particular, the procedure to correct the spherical moon predictions for the effects of lunar mountains and valleys on the width and location of the path of totality is addressed in detail. The errors affecting this technique are addressed, a summary of the results of its application to three solar eclipses are presented, and the implications of the results on the constancy of the solar constant are described.

7 CFR 51.1178 - Maximum anhydrous citric acid permissible for corresponding total soluble solids.

Code of Federal Regulations, 2010 CFR

2010-01-01

... of Florida Oranges and Tangelos Standards for Internal Quality of Common Sweet Oranges (citrus... Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF...

40 CFR 142.63 - Variances and exemptions from the maximum contaminant level for total coliforms.

Code of Federal Regulations, 2010 CFR

2010-07-01

... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS IMPLEMENTATION Identification of Best Technology, Treatment Techniques or Other Means Generally...

49 CFR 525.7 - Basis for petition.

Code of Federal Regulations, 2012 CFR

2012-10-01

... to be manufactured in that affected model year; (1) Maximum overall body width, overall length, and... applicable; (6) Drive train configuration and total drive ratio; (7) Emission control system; (8) Dynamometer...

49 CFR 525.7 - Basis for petition.

Code of Federal Regulations, 2011 CFR

2011-10-01

... to be manufactured in that affected model year; (1) Maximum overall body width, overall length, and... applicable; (6) Drive train configuration and total drive ratio; (7) Emission control system; (8) Dynamometer...

49 CFR 525.7 - Basis for petition.

Code of Federal Regulations, 2013 CFR

2013-10-01

... to be manufactured in that affected model year; (1) Maximum overall body width, overall length, and... applicable; (6) Drive train configuration and total drive ratio; (7) Emission control system; (8) Dynamometer...

Nucleon-Nucleon Total Cross Section

NASA Technical Reports Server (NTRS)

Norbury, John W.

2008-01-01

The total proton-proton and neutron-proton cross sections currently used in the transport code HZETRN show significant disagreement with experiment in the GeV and EeV energy ranges. The GeV range is near the region of maximum cosmic ray intensity. It is therefore important to correct these cross sections, so that predictions of space radiation environments will be accurate. Parameterizations of nucleon-nucleon total cross sections are developed which are accurate over the entire energy range of the cosmic ray spectrum.

The Epidemiology of Physical Training Injuries in U.S. Army Infantry Trainees: Methodology, Population, and Risk Factors

DTIC Science & Technology

1988-11-01

of the weight of the individual, as is the measure of caloric expenditure per minute (kCal/min). METs and kCal/min may be converted to one another if...Fitness Measures as Risk Factors for Injury TABLE 19. Quintiles and Ranges of Total METs Expenditures as Risk Factors for Injury TABLE 20...lifted overhead. ## MLWRATIO: Maximum lift/body weight. 23 TABLE 19. Quintiles# and Ranges of Total METs Expenditures as Risk Factors for Injury. Total

Target Glint Suppression Technology.

DTIC Science & Technology

1980-09-01

report is organized into two principal sections. Section 2 addresses the impact of target effects on the noncoherent detection problem associated with...zero pulse-to-pulse correlation. Results are presented for a scanning search radar which is assumed to noncoherently integrate N pulses. Generally...speaking, detection performance is shown to be a maximum when the pulse-to-pulse correlation is a minimum. As a result noncoherent search radars should

Orthotopic bladder substitution in men revisited: identification of continence predictors.

PubMed

Koraitim, M M; Atta, M A; Foda, M K

2006-11-01

We determined the impact of the functional characteristics of the neobladder and urethral sphincter on continence results, and determined the most significant predictors of continence. A total of 88 male patients 29 to 70 years old underwent orthotopic bladder substitution with tubularized ileocecal segment (40) and detubularized sigmoid (25) or ileum (23). Uroflowmetry, cystometry and urethral pressure profilometry were performed at 13 to 36 months (mean 19) postoperatively. The correlation between urinary continence and 28 urodynamic variables was assessed. Parameters that correlated significantly with continence were entered into a multivariate analysis using a logistic regression model to determine the most significant predictors of continence. Maximum urethral closure pressure was the only parameter that showed a statistically significant correlation with diurnal continence. Nocturnal continence had not only a statistically significant positive correlation with maximum urethral closure pressure, but also statistically significant negative correlations with maximum contraction amplitude, and baseline pressure at mid and maximum capacity. Three of these 4 parameters, including maximum urethral closure pressure, maximum contraction amplitude and baseline pressure at mid capacity, proved to be significant predictors of continence on multivariate analysis. While daytime continence is determined by maximum urethral closure pressure, during the night it is the net result of 2 forces that have about equal influence but in opposite directions, that is maximum urethral closure pressure vs maximum contraction amplitude plus baseline pressure at mid capacity. Two equations were derived from the logistic regression model to predict the probability of continence after orthotopic bladder substitution, including Z1 (diurnal) = 0.605 + 0.0085 maximum urethral closure pressure and Z2 (nocturnal) = 0.841 + 0.01 [maximum urethral closure pressure - (maximum contraction amplitude + baseline pressure at mid capacity)].

Growth and Energy Demand of Meloidogyne incognita on Susceptible and Resistant Vitis vinifera Cultivars.

PubMed

Melakeberhan, H; Ferris, H

1988-10-01

Food (energy) consumption rates ofMeloidogyne incognita were calculated on Vitis vinifera cv. French Colombard (highly susceptible) and cv. Thompson Seedless (moderately resistant). One-month-old grape seedlings in styrofoam cups were inoculated with 2,000 or 8,000 M. incognita second-stage juveniles (J2) and maintained at 17.5 degree days (DD - base 10 C)/day until maximum adult female growth and (or) the end of oviposition. At 70 DD intervals, nematode fresh biomass was calculated on the basis of volumes of 15-20 nematodes per plant obtained with a digitizer and computer algorithm. Egg production was measured at 50-80 DD intervals by weighing 7-10 egg masses and counting the number of eggs. Nematode growth and food (energy) consumption rates were calculated up to 1,000 DD based on biomass increase, respiratory requirements, and an assumption of 60 % assimilation efficiency. The growth rate of a single root-knot nematode, excluding egg production, was similar in both cultivars and had a logistic form. The maximum fresh weight of a mature female nematode was ca. 29-32 mug. The total biomass increase, including egg production, also had a logistic form. Maximum biomass (mature adult female and egg mass) was 211 mug on French Colombard and 127 mug on Thompson Seedless. The calculated total cost to the host for the development of a single J2 from root penetration to the end of oviposition for body growth and total biomass was 0.535 and 0.486 calories with a total energy demand of 1.176 and 0.834 calories in French Colombard and Thompson Seedless, respectively.

Survey of total mercury and methylmercury levels in edible fish from the Adriatic Sea.

PubMed

Storelli, M M; Giacominelli-Stuffler, R; Storelli, A; D'Addabbo, R; Palermo, C; Marcotrigiano, G O

2003-12-01

Total mercury and methylmercury concentrations were measured in the muscle tissue of different fish species from the Adriatic Sea to ascertain whether the concentrations exceeded the maximum level fixed by the European Commission. Large species-dependent variability was observed. The highest total mercury mean concentrations were in benthic (0.20-0.76 microg g(-1) wet wt) and demersal fish (0.22-0.73 microg g(-1) wet wt), while pelagic species showed the lowest levels (0.09-0.23 microg g(-1) wet wt). In 15% of frost fish, in 42% of skate and in 30% of angler fish samples total mercury concentrations exceeded the maximum level fixed by the European Commission (Hg = 1 microg g(-1) wet wt); for the species for which the maximum level was set to 0.5 microg g(-1) wet wt, concentrations exceeding the prescribed legal limit were observed in 6.4% of bokkem, in 6.6% of pandora, in 20% of megrin, in 12.5% of four-spotted megrim, in 16% of striped mullet, in 5.0% of forkbeard and in 5.3% of picarel samples. In all the different species, mercury was present almost completely in the methylated form, with mean percentages between 70 and 100%. Weekly intake was estimated and compared with the provisional tolerable weekly intake recommended by the FAO/WHO Expert Committee on Food Additives. A high exposure was associated with the consumption of only skates, frost fish and angler fish, thought the consumption of the other species, such as, megrim, four spotted megrim, red fish striped mullet and forkbeard, resulted in a weekly intake slightly below the established provisional tolerable weekly intake.

Characterization of stormwater discharges from Las Flores Industrial Park, Rio Grande, Puerto Rico, 1998-99

USGS Publications Warehouse

Rodriguez, Jose M.

2000-01-01

Stormwater discharges from Las Flores Industrial Park, Rio Grande, Puerto Rico, were characterized from June 1998 to July 1999 by measuring the flow rate at two outfalls, delineating the drainage areas for each outfall, and calculating the volume of the stormwater discharges. Stormwater-discharge samples were collected and analyzed to determine the quality of the discharges. Constituent loads and loads per area were estimated for each drainage area. The studied drainage subareas covered approximately 46 percent of the total area of the Las Flores Industrial Park. Industrial groups represented in the study areas include manufacturers of textile, electronics, paper, fabricated metal, plastic, and chemical products. The concentrations of oil and grease (1 to 6 milligrams per liter), biochemical oxygen demand (4.7 to 16 milligrams per liter), total organic carbon (5.8 to 36 milligrams per liter), total suspended solids (28 to 100 milligrams per liter), and total phosphorous (0.11 to 0.78 milligrams per liter) from all the samples collected were less than the U.S. Environmental Protection Agency stormwater benchmark concentrations. Concentrations of chemical oxygen demand (15.8 to 157 milligrams per liter) and nitrate and nitrite (0.06 to 1.75 milligrams per liter) exceeded benchmark concentrations at one of the studied drainage areas. Total Kjeldahl nitrogen concentrations (1.00 to 3.20 milligrams per liter) exceeded the benchmark concentrations at the two studied drainage areas. Maximum concentrations for oil and grease, biochemical oxygen demand, chemical oxygen demand, total organic carbon, total Kjeldahl nitrogen, nitrate plus nitrite, and total phosphorous were detected in an area where electronics, plastics, and chemical products are currently manufactured. The maximum concentration of total suspended solids was detected at an area where textile, paper, plastic, chemical, and fabricated metal products are manufactured.

The Full Scope of Family Physicians' Work Is Not Reflected by Current Procedural Terminology Codes.

PubMed

Young, Richard A; Burge, Sandy; Kumar, Kaparaboyna Ashok; Wilson, Jocelyn

2017-01-01

The purpose of this study was to characterize the content of family physician (FP) clinic encounters, and to count the number of visits in which the FPs addressed issues not explicitly reportable by 99211 to 99215 and 99354 Current Procedural Terminology (CPT) codes with current reimbursement methods and based on examples provided in the CPT manual. The data collection instrument was modeled on the National Ambulatory Medical Care Survey. Trained assistants directly observed every other FP-patient encounter and recorded every patient concern, issue addressed by the physician (including care barriers related to health care systems and social determinants), and treatment ordered in clinics affiliated with 10 residencies of the Residency Research Network of Texas. A visit was deemed to include physician work that was not explicitly reportable if the number or nature of issues addressed exceeded the definitions or examples for 99205/99215 or 99214 + 99354 or a preventive service code, included the physician addressing health care system or social determinant issues, or included the care of a family member. In 982 physician-patient encounters, patients raised 517 different reasons for visit (total, 5278; mean, 5.4 per visit; range, 1 to 16) and the FPs addressed 509 different issues (total issues, 3587; mean, 3.7 per visit; range, 1 to 10). FPs managed 425 different medications, 18 supplements, and 11 devices. A mean of 3.9 chronic medications were continued per visit (range, 0 to 21) and 4.6 total medications were managed (range, 0 to 22). In 592 (60.3%) of the visits the FPs did work that was not explicitly reportable with available CPT codes: 582 (59.3%) addressed more numerous issues than explicitly reportable, 64 (6.5%) addressed system barriers, and 13 (1.3%) addressed concerns for other family members. FPs perform cognitive work in a majority of their patient encounters that are not explicitly reportable, either by being higher than the CPT example number of diagnoses per code or the type of problems addressed, which has implications for the care of complex multi-morbid patients and the growth of the primary care workforce. To address these limitations, either the CPT codes and their associated rules should be updated to reflect the realities of family physicians' practices or new billing and coding approaches should be developed. © Copyright 2017 by the American Board of Family Medicine.

Experimental Verification of the Streamline Curvature Numerical Analysis Method Applied to the Flow through an Axial Flow Fan.

DTIC Science & Technology

1980-05-28

Total Deviation Angles and Measured Inlet Axial Velocity . . . . 55 ix LIST OF FIGURES (Continued) Figure Page 19 Points Defining Blade Sections of...distance from leading edge to point of maximum camber along chord line ar tip vortex core radius AVR axial velocity ratio (Vx /V x c chord length CL tip...yaw ceoefficient d longitudinal distance from leading edge to tip vortex calculation point G distance from chord line to maximum camber point K cascade

Species Profiles: Life Histories and Environmental Requirements of Coastal Fishes and Invertebrates (Pacific Southwest). Pile Perch, Striped Seaperch, and Rubberlip Seaperch

DTIC Science & Technology

1989-07-01

The largest of the teeth on vomer or palatines . surfperches, reaching a maximum length Branchiostegals 5-6; gill membranes of 47 cm TL (Eschmeyer et...Fritzsche 1982). dorsal surface. Fins dusky (Tarp 1952). Maximum length 44 cm total length (TL) (Eschmeyer et al. 1983). LIFE HISTORY Embiotoca lateralis...developed, shore. From 1958 to 1961, sport fused pharyngeal tooth plates that fishermen caught an estimated 5,000 enable the fish to crush hard-shelled

Relationship Between Maximum Tsunami Amplitude and Duration of Signal

NASA Astrophysics Data System (ADS)

Kim, Yoo Yin; Whitmore, Paul M.

2014-12-01

All available tsunami observations at tide gauges situated along the North American coast were examined to determine if there is any clear relationship between maximum amplitude and signal duration. In total, 89 historical tsunami recordings generated by 13 major earthquakes between 1952 and 2011 were investigated. Tidal variations were filtered out of the signal and the duration between the arrival time and the time at which the signals drops and stays below 0.3 m amplitude was computed. The processed tsunami time series were evaluated and a linear least-squares fit with a 95 % confidence interval was examined to compare tsunami durations with maximum tsunami amplitude in the study region. The confidence interval is roughly 20 h over the range of maximum tsunami amplitudes in which we are interested. This relatively large confidence interval likely results from variations in local resonance effects, late-arriving reflections, and other effects.

The influence of synthetic hyetograph parameters on simulation results of runoff from urban catchment

NASA Astrophysics Data System (ADS)

Mazurkiewicz, Karolina; Skotnicki, Marcin

2018-02-01

The paper presents the results of analysis of the influence of the maximum intensity (peak) location in the synthetic hyetograph and rainfall duration on the maximum outflow from urban catchment. For the calculation Chicago hyetographs with a duration from 15 minutes to 180 minutes and peak location between 20% and 50% of the total rainfall duration were design. Runoff simulation was performed using the SWMM5 program for three models of urban catchment with area from 0.9 km2 to 6.7 km2. It was found that the increase in the rainfall peak location causes the increase in the maximum outflow up to 17%. For a given catchment the greatest maximum outflow is generated by the rainfall, which time to peak corresponds to the flow time through the catchment. Presented results may be useful for choosing the rainfall parameters for storm sewer systems modeling.

[Hydroxylamine conversion by anammox enrichment].

PubMed

Hu, Anhui; Zheng, Ping; Lu, Huifeng; Ding, Shuang; Wang, Caihua

2010-04-01

Hydroxylamine is an important intermediate product of anammox. This study was focused on the characteristics of hydroxylamine and nitrite conversions by anammox enrichment. The changes of nitrogenous substrates and related products with time were measured using batch tests with anammox enrichment as inoculum. Since hydroxylamine didn't react with nitrite in uninoculated control culture, these two compounds were chemically stable. Both of them decreased with time in anammox enrichment inoculated cultures, in which ammonia as intermediate product would be produced and converted with the maximum concentration being 0.338 mg/L. The total nitrogen concentration decreased from 4.694 mmol/L to 0.812 mmol/L with conversion rate 82.7% in the end. When hydroxylamine and nitrite concentrations were about 2.5 mmol/L respectively, the maximum specific sludge conversion rates of hydroxylamine was 0.535 mmol/(gVSS.h), which was 1.81 times bigger than that of ammonia in ammonia reaction system; the maximum specific sludge rate of total nitrogen was slightly higher than that in ammonia reaction system. When hydroxylamine concentration increased to 5.0 mmol/L, the hydroxylamine and nitrite conversion rates promoted by 26.7% and 120.7% respectively; and the maximum ammonia accumulated was 1.810 mmol/L. When nitrite concentration increased to 5.0 mmol/L, the hydroxylamine and nitrite conversion rates promoted by 6.9% and 9.0% respectively; and the maximum ammonia accumulated was 0.795 mmol/L. Anammox enrichment was capable of converting hydroxylamine and nitrite simultaneously and had the higher conversion rate of hydroxylamine than ammonia conversion rate. Hydroxylamine and nitrite conversion rates were less affected by increase in nitrite concentration, but more significantly influenced by increase in hydroxylamine. The maximum ammonia concentration accumulated would rise as the result of increasing both hydroxylamine and nitrite. The result of experiment was consistent with pathway model presented by van de Graaf AA.

Influence of the extraction method on the yield of flavonoids and phenolics from Sideritis spp. (Pirin Mountain tea).

PubMed

Alipieva, Kalina; Petreska, Jasmina; Gil-Izquierdo, Angel; Stefova, Marina; Evstatieva, Ljuba; Bankova, Vassya

2010-01-01

The influence of the extraction method on the yield and composition of extracts of Sideritis (Pirin mountain tea) has been studied. Maceration, ultrasound-assisted (USAE) and microwave assisted extraction (MAE) were applied. Total phenolics and total flavonoids were quantified spectrophotometrically, and individual compounds were analyzed by HPLC-DAD-MS(n). This preliminary study reveals that the traditional way of tea preparation from Sideritis is the most appropriate in order to extract the maximum of total flavonoids and total phenolics. In the case of methanol extraction, the optimal method is USAE.

Standardized ileal digestible valine:lysine dose response effects in 25- to 45-kg pigs under commercial conditions.

PubMed

Gonçalves, Marcio A D; Tokach, Mike D; Dritz, Steve S; Bello, Nora M; Touchette, Kevin J; Goodband, Robert D; DeRouchey, Joel M; Woodworth, Jason C

2018-03-06

Two experiments were conducted to estimate the standardized ileal digestible valine:lysine (SID Val:Lys) dose response effects in 25- to 45-kg pigs under commercial conditions. In experiment 1, a total of 1,134 gilts (PIC 337 × 1050), initially 31.2 kg ± 2.0 kg body weight (BW; mean ± SD) were used in a 19-d growth trial with 27 pigs per pen and seven pens per treatment. In experiment 2, a total of 2,100 gilts (PIC 327 × 1050), initially 25.4 ± 1.9 kg BW were used in a 22-d growth trial with 25 pigs per pen and 12 pens per treatment. Treatments were blocked by initial BW in a randomized complete block design. In experiment 1, there were a total of six dietary treatments with SID Val at 59.0, 62.5, 65.9, 69.6, 73.0, and 75.5% of Lys and for experiment 2 there were a total of seven dietary treatments with SID Val at 57.0, 60.6, 63.9, 67.5, 71.1, 74.4, and 78.0% of Lys. Experimental diets were formulated to ensure that Lys was the second limiting amino acid throughout the experiments. Initially, linear mixed models were fitted to data from each experiment. Then, data from the two experiments were combined to estimate dose-responses using a broken-line linear ascending (BLL) model, broken-line quadratic ascending (BLQ) model, or quadratic polynomial (QP). Model fit was compared using Bayesian information criterion (BIC). In experiment 1, ADG increased linearly (P = 0.009) with increasing SID Val:Lys with no apparent significant impact on G:F. In experiment 2, ADG and ADFI increased in a quadratic manner (P < 0.002) with increasing SID Val:Lys whereas G:F increased linearly (P < 0.001). Overall, the best-fitting model for ADG was a QP, whereby the maximum mean ADG was estimated at a 73.0% (95% CI: [69.5, >78.0%]) SID Val:Lys. For G:F, the overall best-fitting model was a QP with maximum estimated mean G:F at 69.0% (95% CI: [64.0, >78.0]) SID Val:Lys ratio. However, 99% of the maximum mean performance for ADG and G:F were achieved at, 68% and 63% SID Val:Lys ratio, respectively. Therefore, the SID Val:Lys requirement ranged from73.0% for maximum ADG to 63.2% SID Val:Lys to achieve 99% of maximum G:F in 25- to 45-kg BW pigs.

Meteorological variables affect fertility rate after intrauterine artificial insemination in sheep in a seasonal-dependent manner: a 7-year study.

PubMed

Palacios, C; Abecia, J A

2015-05-01

A total number of 48,088 artificial inseminations (AIs) have been controlled during seven consecutive years in 79 dairy sheep Spanish farms (41° N). Mean, maximum and minimum ambient temperatures (Ts), temperature amplitude (TA), mean relative humidity (RH), mean solar radiation (SR) and total rainfall of each insemination day and 15 days later were recorded. Temperature-humidity index (THI) and effective temperature (ET) have been calculated. A binary logistic regression model to estimate the risk of not getting pregnant compared to getting pregnant, through the odds ratio (OR), was performed. Successful winter inseminations were carried out under higher SR (P < 0.01) and summer inseminations under lower SR values (P < 0.05). Successful inseminations during the summer were performed under significantly lower maximum T (P < 0.01), while winter inseminations resulted in pregnancy when they were carried out under higher maximum (P < 0.05) and minimum Ts (P < 0.01). Up to five meteorological variables presented OR >1 (maximum T, ET and rainfall on AI day, and ET and rainfall on day 15), and two variables presented OR <1 (SR on AI day and maximum T on day 15). However, the effect of meteorological factors affected fertility in opposite ways, so T becomes a protective or risk factor on fertility depending on season. In conclusion, the percentage of pregnancy after AI in sheep is significantly affected by meteorological variables in a seasonal-dependent manner, so the parameters such as temperature reverse their effects in the hot or cold seasons. A forecast of the meteorological conditions could be a useful tool when AI dates are being scheduled.

Filed and granted Indian Patents in dentistry from 2005-2009: a critical analysis and review.

PubMed

Bijle, Mohammed Nadeem Ahmed; Patil, Shankargouda

2013-01-01

Patent policies have proved to be extremely important for several countries to develop. India has achieved its global status since 2005; a critical analysis of the patents at IPO will help us to identify the potential, available for patents with Indian Dental Fraternity. The aim of this study is to critically analyze and review Indian Patents in the field of Dentistry from 2005-2009 for evaluation of status of Indian Patents in Dentistry. A total of 110 patents were scrutinized from 2005-2009 available by IPO on www.patentoffice.nic.in. Following which a preliminary data were collected from individual patents and recorded in a record sheet. The data collected were analyzed using SPSS 16.0 software and were subjected to ANOVA test. All patents scrutinized were applied for dental materials (100%). Company applicants (70%) were the maximum followed by the individual applicants (27.2%). A total of 87.3% of patents had enrolled for International Application. Priority country had maximum favor with USA (39.2%) followed by Europe (36.1%). Single inventors (44.5%) were the maximum followed by two inventors (22.7%). Europe (37.3%) had the maximum first inventor, followed by United States of America (30%) and India (10.9%). Individual inventors were maximum in Europe (38.8%) followed by USA (20.4%) and India (16.3%). Contribution from Indian Nationals as inventors for patents in the field of Dentistry is limited, thus reducing the pace of progress and development. Indian inventors in the field of Dentistry have to go a long way to compete with the fellow mates of developed countries like USA and Europe. Continuing Dental Education programs on Intellectual property rights should be conducted on regular basis especially for Dentist's involved in research.