Science.gov

Sample records for adductor longus al

  1. Surgical technique for treatment of recalcitrant adductor longus tendinopathy.

    PubMed

    Gill, Thomas J; Carroll, Kaitlin M; Makani, Amun; Wall, Andrew J; Dumont, Guillaume D; Cohn, Randy M

    2014-04-01

    Chronic groin pain in the athlete can be a difficult problem to manage. Adductor dysfunction is the most common cause of groin pain in athletes, with the adductor longus being the tendon most commonly involved. The most reproducible finding for adductor longus tendinopathy is tenderness along the tendon with passive abduction and resisted hip adduction in extension. Magnetic resonance imaging and injection of a corticosteroid and anesthetic into the proximal muscle-tendon junction are both helpful in confirming the diagnosis. Nonoperative treatment may consist of protected weight bearing, ice application, ultrasonography, electrical stimulation, and gentle stretching with progressive strengthening. However, nonoperative management is not always successful. In these instances, surgical treatment can be quite effective. We present the indications, surgical technique, and rehabilitation protocol of adductor tenotomy for chronic tendinopathy. This can prove a useful tool for the treatment of recalcitrant groin pain attributable to the adductor longus. PMID:24904780

  2. Surgical technique for treatment of recalcitrant adductor longus tendinopathy.

    PubMed

    Gill, Thomas J; Carroll, Kaitlin M; Makani, Amun; Wall, Andrew J; Dumont, Guillaume D; Cohn, Randy M

    2014-04-01

    Chronic groin pain in the athlete can be a difficult problem to manage. Adductor dysfunction is the most common cause of groin pain in athletes, with the adductor longus being the tendon most commonly involved. The most reproducible finding for adductor longus tendinopathy is tenderness along the tendon with passive abduction and resisted hip adduction in extension. Magnetic resonance imaging and injection of a corticosteroid and anesthetic into the proximal muscle-tendon junction are both helpful in confirming the diagnosis. Nonoperative treatment may consist of protected weight bearing, ice application, ultrasonography, electrical stimulation, and gentle stretching with progressive strengthening. However, nonoperative management is not always successful. In these instances, surgical treatment can be quite effective. We present the indications, surgical technique, and rehabilitation protocol of adductor tenotomy for chronic tendinopathy. This can prove a useful tool for the treatment of recalcitrant groin pain attributable to the adductor longus.

  3. Rupture of adductor longus tendon due to ciprofloxacin.

    PubMed

    Mouzopoulos, George; Stamatakos, Mihalis; Vasiliadis, George; Skandalakis, Panagiotis

    2005-12-01

    We present a rare case of spontaneous rupture of the adductor longus tendon induced by ciprofloxacin. A 35-year-old man was diagnosed with pneumonia and was recommended ciprofloxacin 500 mg iv twice a day for 7 days. Three days after receiving the initial dose, he developed discomfort in his left medial thigh, and pain and swelling in the same area followed ten days later. He consulted us when he noted a palpable mass on the medial side of his left thigh, and MRI study revealed adductor longus tendon rupture. There was no obvious underlying disease or other factor causing fragility of his adductor longus tendon. We review the pathophysiological mechanisms leading to fluoroquinolone-related tendon rupture as well as the risk factors and discuss proper management.

  4. Adductor pollicis longus strain in a professional baseball player: case report and review of thenar pain.

    PubMed

    Pinkowsky, Gregory J; Roberts, John; Allred, Jeff; Pujalte, George G; Gallo, Robert A

    2013-07-01

    Thenar pain can represent a significant morbidity for a baseball player who relies on manual dexterity for gripping a bat and precise and accurate throws. While osseous, ligamentous, and neurovascular pathologies are commonly considered, musculotendinous injuries are often neglected in the differential diagnosis of thenar pain. We present a case of adductor pollicis longus strain as a cause of acute thenar pain in a baseball player. Adductor pollicis longus strains should be considered in any baseball player sustaining a hyperabduction force to the thumb.

  5. Responses of Electromyogram Activity in Adductor Longus Muscle of Rats to the Altered Gravity Levels

    NASA Astrophysics Data System (ADS)

    Ohira, Takashi; Wang, Xiao Dong; Terada, Masahiro; Kawano, Fuminori; Higo, Yoko; Nakai, Naoya; Ochiai, Toshimasa; Gyotoku, Jyunichirou; Nishimoto, Norihiro; Ogura, Akihiko; Ohira, Yoshinobu

    2008-06-01

    Responses of electromyogram (EMG) activities in the rostral and caudal regions of adductor longus (AL) muscle to altered gravity levels during parabolic flight of a jet airplane, as well as hindlimb suspension, were investigated in adult rats. Tonic EMGs in both regions were noted when the rats were exposed to hyper-G, as well as 1-G. The hip joints were adducted and the sedental quadrupedal position was maintained at these G levels. However, the EMG activities in these regions decreased and became phasic, when the hip joints were abducted and extended backward in μ-G environment. Such changes of joint angles caused passive shortening of sarcomeres only in the caudal region of AL. Atrophy and shift toward fast-twitch type were noted in fibers of the caudal region after 16-day unloading. Although fiber transformation was also induced in the rostral region, no atrophy was seen in fast-twitch fibers. The data may suggest that the atrophy and shift of phenotype caused by gravitational unloading in fibers of the caudal region may be related to the decrease in the neural and mechanical activities. Fiber type transformation toward fast-twitch type may be also related to the change of muscle activity from tonic to phasic patterns, which are the typical characteristics of fast-twitch muscle. However, the responses to unloading in fibers of rostral region were not related to the reduction of mechanical load.

  6. Five myofibrillar lesion types in eccentrically challenged, unloaded rat adductor longus muscle--a test model

    NASA Technical Reports Server (NTRS)

    Thompson, J. L.; Balog, E. M.; Fitts, R. H.; Riley, D. A.

    1999-01-01

    Sarcomere disruptions are observed in the adductor longus (AL) muscles following voluntary reloading of spaceflown and hindlimb suspension unloaded (HSU) rat, which resemble lesions in eccentrically challenged muscle. We devised and tested an eccentric contraction (ECCON) test system for the 14-day HSU rat AL. Six to 7 hours following ECCON, ALs were fixed to allow immunostaining and electron microscopy (EM). Toluidine blue-stained histology semithin sections were screened for lesion density (#/mm2). Serial semithin sections from the ECCON group were characterized for myosin immunointensity of lesions. Five myofibrillar lesion types were identified in histological semithin sections: focal contractions; wide A-bands; opaque areas; missing A-bands; and hyperstretched sarcomeres. Lesion density by type was greater for ECCON than NonECCON ALs (P< or =0.05; focal contractions and opaque regions). Lesion density (#-of-all-five-types/mm2) was significantly different (ECCON: 23.91+/-10.58 vs. NonECCON: 5.48+/-1.28, P< or =0.05; ECCON vs. SHAM: 0.00+/-0.00; P< or = 0.025). PostECCON optimal tension decreased (Poi-drop, 17.84+/-4.22%) and was correlated to lesion density (R2=0.596), but prestretch tension demonstrated the highest correlation with lesion density (R2=0.994). In lesions, the darkly staining A-band lost the normally organized thick filament alignment to differing degrees across the different lesion types. Ranking the five lesion types by a measure of lesion length deformation (hypercontracted to hyperstretched) at the light microscopy level, related to the severity of thick filament registry loss across the lesion types at the electron microscopic level. This ranking suggested that the five lesion types seen in semithin sections at the light level represented a lesion progression sequence and paralleled myosin immunostaining loss as the distorted A-band filaments spread across the hyperlengthening lesion types. Lesion ultrastructure indicated damage involved

  7. Rehabilitation and Return to Sport Following Surgical Repair of the Rectus Abdominis and Adductor Longus in a Professional Basketball Player: A Case Report.

    PubMed

    Short, Steven M; Anloague, Philip A; Strack, Donald S

    2016-08-01

    Study Design Case report. Background Acute traumatic avulsion of the rectus abdominis and adductor longus is rare. Chronic groin injuries, often falling under the athletic pubalgia spectrum, have been reported to be more common. There is limited evidence detailing the comprehensive rehabilitation and return to sport of an athlete following surgical or conservative treatment of avulsion injuries of the pubis or other sports-related groin pathologies. Case Description A 29-year-old National Basketball Association player sustained a contact injury during a professional basketball game. This case report describes a unique clinical situation specific to professional sport, in which a surgical repair of an avulsed rectus abdominis and adductor longus was combined with a multimodal impairment- and outcomes-based rehabilitation program. Outcomes The patient returned to in-season competition at 5 weeks postoperation. Objective measures were tracked throughout rehabilitation and compared to baseline assessments. Measures such as the Copenhagen Hip and Groin Outcome Score and numeric pain-rating scale revealed progress beyond the minimal important difference. Discussion This case report details the clinical reasoning and evidence-informed interventions involved in the return to elite sport. Detailed programming and objective assessment may assist in achieving desired outcomes ahead of previously established timelines. Level of Evidence Therapy, level 4. J Orthop Sports Phys Ther 2016;46(8):697-706. Epub 3 Jul 2016. doi:10.2519/jospt.2016.6352. PMID:27374014

  8. Rehabilitation and Return to Sport Following Surgical Repair of the Rectus Abdominis and Adductor Longus in a Professional Basketball Player: A Case Report.

    PubMed

    Short, Steven M; Anloague, Philip A; Strack, Donald S

    2016-08-01

    Study Design Case report. Background Acute traumatic avulsion of the rectus abdominis and adductor longus is rare. Chronic groin injuries, often falling under the athletic pubalgia spectrum, have been reported to be more common. There is limited evidence detailing the comprehensive rehabilitation and return to sport of an athlete following surgical or conservative treatment of avulsion injuries of the pubis or other sports-related groin pathologies. Case Description A 29-year-old National Basketball Association player sustained a contact injury during a professional basketball game. This case report describes a unique clinical situation specific to professional sport, in which a surgical repair of an avulsed rectus abdominis and adductor longus was combined with a multimodal impairment- and outcomes-based rehabilitation program. Outcomes The patient returned to in-season competition at 5 weeks postoperation. Objective measures were tracked throughout rehabilitation and compared to baseline assessments. Measures such as the Copenhagen Hip and Groin Outcome Score and numeric pain-rating scale revealed progress beyond the minimal important difference. Discussion This case report details the clinical reasoning and evidence-informed interventions involved in the return to elite sport. Detailed programming and objective assessment may assist in achieving desired outcomes ahead of previously established timelines. Level of Evidence Therapy, level 4. J Orthop Sports Phys Ther 2016;46(8):697-706. Epub 3 Jul 2016. doi:10.2519/jospt.2016.6352.

  9. Effects of spaceflight in the adductor longus muscle of rats flown in the Soviet Biosatellite COSMOS 2044. A study employing neural cell adhesion molecule (N-CAM) immunocytochemistry and conventional morphological techniques (light and electron microscopy)

    NASA Technical Reports Server (NTRS)

    D'Amelio, F.; Daunton, N. G.

    1992-01-01

    The effects of spaceflight upon the "slow" muscle adductor longus were examined in rats flown in the Soviet Biosatellite COSMOS 2044. The techniques employed included standard methods for light microscopy, neural cell adhesion molecule (N-CAM) immunocytochemistry and electron microscopy. Light microscopic observations revealed myofiber atrophy and segmental necrosis accompanied by cellular infiltrates composed of macrophages, leukocytes and mononuclear cells. Neural cell adhesion molecule immunoreactivity (N-CAM-IR) was seen on the myofiber surface and in regenerating myofibers. Ultrastructural alterations included Z band streaming, disorganization of myofibrillar architecture, sarcoplasmic degradation, extensive segmental necrosis with apparent preservation of the basement membrane, degenerative phenomena of the capillary endothelium and cellular invasion of necrotic areas. Regenerating myofibers were identified by the presence of increased amounts of ribosomal aggregates and chains of polyribosomes associated with myofilaments. The principal electron microscopic changes of the neuromuscular junctions showed axon terminals with a decrease or absence of synaptic vesicles replaced by microtubules and neurofilaments, degeneration of axon terminals, vacant axonal spaces and changes suggestive of axonal sprouting. The present observations suggest that alterations such as myofibrillar disruption and necrosis, muscle regeneration and denervation and synaptic remodeling at the level of the neuromuscular junction may take place during spaceflight.

  10. Experiment K-7-18: Effects of Spaceflight in the Muscle Adductor Longus of Rats Flown in the Soviet Biosatellite Cosmos 2044. Part 1; A Study Employing Neural Cell Adhesion Molecules (N-CAM) Immunocytochemistry and Conventional Morphological Techniques (Light and Electron Microscopy)

    NASA Technical Reports Server (NTRS)

    Daunton, N. G.; DAmelio, F.; Wu, L.; Ilyina-Kakueva, E. I.; Krasnov, I. B.; Hyde, T. M.; Sigworth, S. K.

    1994-01-01

    The effects of spaceflight upon the 'slow' muscle adductor longus was examined in rats flown in the Soviet Biosatellite COSMOS 2044. Three groups - synchronous, vivarium and basal served as controls. The techniques employed included standard methods for light microscopy, N-CAM immunocytochemistry and electron microscopy. Light microscopic observations revealed myofiber atrophy, contraction bands and segmental necrosis accompanied by cellular infiltrates composed of macrophages, leucocytes and mononuclear cells. N-CAM immunoreactivity was seen (N-CAM-IR) on the myofiber surface, satellite cells and in regenerating myofibers reminiscent of myotubes. Ultrastructural alterations included Z band streaming, disorganization of myofibrillar architecture, sarcoplasmic degradation, extensive segmental necrosis with preservation of the basement membrane, degenerative phenomena of the capillary endothelium and cellular invasion of necrotic areas. Regenerating myofibers were identified by the presence of increased amounts of ribosomal aggregates and chains of polyribosomes associated with myofilaments that displayed varied distributive patterns. The principal electron microscopic changes of the neuromuscular junctions consisted of a decrease or absence of synaptic vesicles, degeneration of axon terminals, increased number of microtubules, vacant axonal spaces and axonal sprouting. The present observations indicate that major alterations such as myofibrillar disruption and necrosis, muscle regeneration and denervation and synaptic remodeling at the level of the neuromuscular junction may take place during spaceflight.

  11. Flexor digitorum longus tendoscopy.

    PubMed

    Lui, Tun Hing

    2012-01-01

    The flexor digitorum longus tendon is susceptible to injury along its entire course, and lacerations, ruptures, longitudinal tears, and stenosing tenosynovitis have all been reported. Moreover, this tendon is commonly used for reconstruction of dysfunctional posterior tibial and Achilles tendons. Traditionally, surgery involving the flexor digitorum longus tendon was performed via open incision. We describe a technique of flexor digitorum longus tendoscopy that may encourage the future development of a minimally invasive approach to flexor digitorum longus tendon procedures. PMID:22727339

  12. Diagnosing adductor muscle avulsion at the symphysis pubis with ultrasound.

    PubMed

    Chen, David J; Caldera, Franklin E; Kim, Woojin

    2014-04-01

    A 58-yr-old woman presented after experiencing left hip and groin pain for 1 mo. She denies any history of trauma, falls or any bruising, or history of sports injury or extreme physical exertion before her symptoms. On ultrasonography, she was found to have an avulsion tear at the origin of the adductor muscles, predominantly involving the adductor longus and brevis muscles. The treatment course was conservative: nonsteroidal anti-inflammatory drugs for pain control and physical therapy for muscle strengthening and balance improvement. Upon follow-up, she demonstrated significant improvement and resolution of her pain. PMID:24196970

  13. Diagnosing adductor muscle avulsion at the symphysis pubis with ultrasound.

    PubMed

    Chen, David J; Caldera, Franklin E; Kim, Woojin

    2014-04-01

    A 58-yr-old woman presented after experiencing left hip and groin pain for 1 mo. She denies any history of trauma, falls or any bruising, or history of sports injury or extreme physical exertion before her symptoms. On ultrasonography, she was found to have an avulsion tear at the origin of the adductor muscles, predominantly involving the adductor longus and brevis muscles. The treatment course was conservative: nonsteroidal anti-inflammatory drugs for pain control and physical therapy for muscle strengthening and balance improvement. Upon follow-up, she demonstrated significant improvement and resolution of her pain.

  14. Influence of electrical stimulation on hip joint adductor muscle activity during maximum effort

    PubMed Central

    Nakano, Sota; Wada, Chikamune

    2016-01-01

    [Purpose] This study investigated whether hip adductor activity was influenced by electrical stimulation of the tensor fascia lata muscle. [Subjects and Methods] The subjects were 16 nondisabled males. Each subject was asked to adduct the hip joint with maximum effort. The electromyogram of the adductor longus was recorded under two experimental conditions, with and without electrical stimulation of the tensor fascia lata. [Results] In the presence of electrical stimulation, muscle activity decreased to 72.9% (57.8–89.3%) of that without stimulation. [Conclusion] These results suggested that inactivation of the adductor group was promoted by electrical stimulation of the tensor fascia lata. PMID:27313387

  15. Adductor muscle strains in sport.

    PubMed

    Nicholas, Stephen J; Tyler, Timothy F

    2002-01-01

    An in-season adductor muscle strain may be debilitating for the athlete. Furthermore, an adductor strain that is treated improperly could become chronic and career threatening. Any one of the six muscles of the adductor group could be involved. The degree of injury can range from a minor strain (Grade I), where minimal playing time is lost, to a severe strain (Grade III) in which there is complete loss of muscle function. Ice hockey and soccer players seem particularly susceptible to adductor muscle strains. In professional ice hockey players throughout the world, approximately 10% of all injuries are groin strains. These injuries, which have been linked to hip muscle weakness, previous injuries to that area, preseason practice sessions and level of experience, may be preventable if such risk factors can be addressed before each season. Hip-strengthening exercises were shown to be an effective method of reducing the incidence of adductor strains in one closely followed National Hockey League ice hockey team. Despite the identification of risk factors and strengthening intervention for ice hockey players, adductor strains continue to occur throughout sport. Clinicians feel an active training programme, along with completely restoring the strength of the adductor muscle group, is the key to successful rehabilitation. Surgical intervention is available if nonoperative treatment fails for 6 months or longer. Adductor release and tenotomy was reported to have limited success in athletes. PMID:11929360

  16. Hip adductor activations during run-to-cut maneuvers in compression shorts: Implications for return to sport after groin injury

    PubMed Central

    CHAUDHARI, AJIT M. W.; JAMISON, STEVEN T.; MCNALLY, MICHAEL P.; PAN, XUELIANG; SCHMITT, LAURA C.

    2014-01-01

    Athletes at high risk of groin strains in sports such as hockey and soccer often choose to wear shorts with directional compression to aid in prevention or recovery from hip adductor strains. Large eccentric contractions are known to result in or exacerbate strain injuries, but it is unknown if these shorts have a beneficial effect on hip adductor muscle activity. In this study, surface electromyography of the adductor longus and ground reaction force (GRF) data were obtained simultaneously on 29 healthy individuals without previous history of serious injury while performing unanticipated 45° run-to-cut maneuvers in a laboratory setting wearing shorts with non-directional compression (control, HeatGear, Under Armour, USA) or shorts with directional compression (directional, CoreShort PRO, Under Armour, USA), in random order. Average adductor activity in the stance leg was significantly lower in the directional condition than in the control condition during all parts of stance phase (all p<0.042). From this preliminary analysis, wearing directional compression shorts appears to be associated with reduced stance limb hip adductor activity. Athletes seeking to reduce demand on the hip adductors as they approach full return to activities may benefit from the use of directional compression shorts. PMID:24669858

  17. Hip adductor activations during run-to-cut manoeuvres in compression shorts: implications for return to sport after groin injury.

    PubMed

    Chaudhari, Ajit M W; Jamison, Steven T; McNally, Michael P; Pan, Xueliang; Schmitt, Laura C

    2014-01-01

    Athletes at high risk of groin strains in sports such as hockey and soccer often choose to wear shorts with directional compression to aid in prevention of or recovery from hip adductor strains. Large, eccentric contractions are known to result in or exacerbate strain injuries, but it is unknown if these shorts have a beneficial effect on hip adductor muscle activity. In this study, surface electromyography (EMG) of the adductor longus and ground reaction force (GRF) data were obtained simultaneously on 29 healthy individuals without previous history of serious injury while performing unanticipated 45° run-to-cut manoeuvres in a laboratory setting wearing shorts with non-directional compression (control, HeatGear, Under Armour, USA) or shorts with directional compression (directional, CoreShort PRO, Under Armour, USA), in random order. Average adductor activity in the stance leg was significantly lower in the directional condition than in the control condition during all parts of stance phase (all P < 0.042). From this preliminary analysis, wearing directional compression shorts appears to be associated with reduced stance limb hip adductor activity. Athletes seeking to reduce demand on the hip adductors as they approach full return to activities may benefit from the use of directional compression shorts. PMID:24669858

  18. Unique use of botulinum toxin to decrease adductor tone and allow surgical excision of vulvar carcinoma.

    PubMed

    Guo, Y; Shin, K

    2004-01-01

    Here, we present the case of an 86-year-old woman with vulvar carcinoma requiring surgical resection and with Parkinson's disease with severe spasticity and contractures of the lower extremities. Because of the patient's severe contractures and spasticity (her knees could only be separated by 2 cm with sustained abducting force), surgical positioning and access to the vulva were impossible. The patient was admitted, intending to undergo surgery after injection with botulinum toxin (BTX) to hip adductors and intensive physical therapy. After confirmed healed hip arthroplasty, the patient underwent BTX injection (400 U) to her bilateral adductor brevis, adductor longus, adductor magnus, and semimembranosus and semitendinosus muscles on day 2 of her hospital stay. On day 3, a physical therapist began a twice-a-day stretching program. An adjustable abduction brace was custom-made to provide sustained stretching. On day 9, the patient underwent wide local excision of vulvar carcinoma with the abductor brace in place. The patient tolerated the surgery well and was discharged home on day 11 with continuous physical therapy. Upon discharge, the distance between the patient's knees was 14 cm. This unique case demonstrated a new indication for BTX treatment in the preoperative setting to allow surgical positioning and access.

  19. Successful return to high-level sports following early surgical repair of combined adductor complex and rectus abdominis avulsion.

    PubMed

    Tansey, R J; Benjamin-Laing, H; Jassim, S; Liekens, K; Shankar, A; Haddad, F S

    2015-11-01

    Hip and groin injuries are common in athletes who take part in high level sports. Adductor muscle tendon injuries represent a small but important number of these injuries. Avulsion of the tendons attached to the symphysis pubis has previously been described: these can be managed both operatively and non-operatively. We describe an uncommon variant of this injury, namely complete avulsion of the adductor sleeve complex: this includes adductor longus, pectineus and rectus abdominis. We go on to describe a surgical technique which promotes a full return to the pre-injury level of sporting activity. Over a period of ten years, 15 high-level athletes with an MRI-confirmed acute adductor complex avulsion injury (six to 34 days old) underwent surgical repair. The operative procedure consisted of anatomical re-attachment of the avulsed tissues in each case and mesh reinforcement of the posterior inguinal wall in seven patients. All underwent a standardised rehabilitation programme, which was then individualised to be sport-specific. One patient developed a superficial wound infection, which was successfully treated with antibiotics. Of the 15 patients, four complained of transient local numbness which resolved in all cases. All patients (including seven elite athletes) returned to their previous level of participation in sport.

  20. Hip adductors' strength, flexibility, and injury risk.

    PubMed

    Hrysomallis, Con

    2009-08-01

    The hip adductor muscle group plays an important role in both movement and stability at the hip joint in many athletic pursuits. Injury to this muscle group has been reported in a number of sports, among them, ice hockey, soccer, Australian football, and swimming. The identification of muscle characteristics that predispose a muscle to injury is an important step in developing conditioning programs to reduce injury risk. Muscle strength and range of motion are 2 parameters that may influence injury risk. The aim of this review was to examine the relationship between hip adductors' strength, flexibility, and injury risk. Strength testing has involved isokinetic or hand-held dynamometry. Flexibility has usually been assessed by goniometry during maximal hip abduction. An association has been reported between adductor strength deficits and injury for ice hockey players. Low adductor flexibility has also been identified as a risk factor for injury in soccer players. An intervention program that strengthened the hip adductors had some success in reducing injury risk for ice hockey players. There is some low- to moderate-level evidence from cohort studies to suggest that flexibility and strength are related to injury risk in particular sports and that an intervention program may be effective in reducing injury risk. Higher level evidence from randomized controlled trials is required to firmly establish the link between hip adductor flexibility, strength, and injury. PMID:19620912

  1. Speech Intelligibility in Severe Adductor Spasmodic Dysphonia

    ERIC Educational Resources Information Center

    Bender, Brenda K.; Cannito, Michael P.; Murry, Thomas; Woodson, Gayle E.

    2004-01-01

    This study compared speech intelligibility in nondisabled speakers and speakers with adductor spasmodic dysphonia (ADSD) before and after botulinum toxin (Botox) injection. Standard speech samples were obtained from 10 speakers diagnosed with severe ADSD prior to and 1 month following Botox injection, as well as from 10 age- and gender-matched…

  2. Late rupture of extensor pollicis longus after wrist arthroscopy.

    PubMed

    Fortems, Y; Mawhinney, I; Lawrence, T; Trial, I A; Stanley, J K

    1995-06-01

    The first cases of impending rupture of the extensor pollicis longus after wrist arthroscopy are reported and the etiology is compared with extensor pollicis longus ruptures after nondisplaced or minimally displaced Colles fractures. Both cases were treated with extensor indices proprius to extensor pollicis longus transfer with good clinical results. PMID:7632309

  3. Isokinetic imbalance of adductor-abductor hip muscles in professional soccer players with chronic adductor-related groin pain.

    PubMed

    Belhaj, K; Meftah, S; Mahir, L; Lmidmani, F; Elfatimi, A

    2016-11-01

    This study aims to compare the isokinetic profile of hip abductor and adductor muscle groups between soccer players suffering from chronic adductor-related groin pain (ARGP), soccer players without ARGP and healthy volunteers from general population. Study included 36 male professional soccer players, who were randomly selected and followed-up over two years. Of the 21 soccer players eligible to participate in the study, 9 players went on to develop chronic ARGP and 12 players did not. Ten healthy male volunteers were randomly selected from the general population as a control group. Comparison between the abductor and adductor muscle peak torques for players with and without chronic ARGP found a statistically significant difference on the dominant and non-dominant sides (p < .005), with the abductor muscle significantly stronger than the adductor muscle. In the group of healthy volunteers, the adductor muscle groups were significantly stronger than the abductor muscle groups on both dominant and non-dominant sides (p < .05). For the group of players who had developed chronic ARGP, abductor-adductor torque ratios were significantly higher on the affected side (p = .008). The adductor muscle strength was also significantly decreased on the affected side. This imbalance appears to be a risk factor for adductor-related groin injury. Therefore, restoring the correct relationship between these two agonist and antagonist hip muscles may be an important preventative measure that should be a primary concern of training and rehabilitation programmes. PMID:27017973

  4. Abductor pollicis longus tendon division with swan neck thumb deformity.

    PubMed

    Zacharia, Balaji; Puthezhath, Kishore

    2012-08-01

    Swan neck thumb deformity can be caused by osteoarthritis, rheumatoid arthritis, systemic lupus erythematosus, tendon transfers and paralytic diseases. Abductor pollicis longus is one of the major stabilizing tendon of the carpometacarpal joint of thumb. To the best of our knowledge, swan neck thumb deformity owing to division of abductor pollicis longus tendon is rare. In this article, we describe a case of isolated division of abductor pollicis longus tendon presenting with swan-neck deformity of thumb and discuss the mechanism, management and outcome. The patient was treated by repair of the divided tendon using palmaris longus tendon graft. At approximately 107 weeks following treatment, the patient was having full range of thumb movement and the deformity completely disappeared. We also describe the unusual mechanism whereby an isolated division of abductor pollicis longus tendon results in swan neck thumb deformity. Level of clinical evidence IV. PMID:22825877

  5. Hindfoot endoscopy for accessory flexor digitorum longus and flexor hallucis longus tenosynovitis.

    PubMed

    Ogut, Tahir; Ayhan, Egemen

    2011-03-01

    We present a case report involving the flexor digitorum accessorius longus (FDAL) tendon which travels through a fibro-osseous tunnel together with the flexor hallucis longus (FHL) tendon, causing a stenosing tenosynovitis. The patient was admitted with posteromedial ankle pain and diagnosed clinically as FHL tenosynovitis. We found two tendons in the tunnel during hindfoot endoscopy. The stenosis was relieved by endoscopic debridement. After the operation, we checked the MRI images and observed two tendons. We concluded that the accessory tendon was the FDAL. Two years later the patient was admitted with the same symptoms. We excised the FDAL muscle and the patient's symptoms resolved. The FDAL muscle is a cause of FHL tenosynovitis. Because of its variability and mostly asymptomatic nature, it may not be noticed it on an MRI scan. Hindfoot endoscopy is a safe tool for the diagnosis of this condition and curative treatment is afforded by excision of the FDAL muscle. PMID:21276556

  6. Disorders of the Flexor Hallucis Longus and Os Trigonum.

    PubMed

    Rungprai, Chamnanni; Tennant, Joshua N; Phisitkul, Phinit

    2015-10-01

    Os trigonum syndrome with disease of the flexor hallucis longus tendon, so-called stenosing flexor tenosynovitis, is a common cause of posterior ankle impingement. Conservative treatment is the recommended first line of treatment, with secondary treatment options of either open or arthroscopic os trigonum excision with flexor hallucis longus retinaculum release. The arthroscopic approaches have gained popularity in the past decade because of less scarring, less postoperative pain, minimal overall morbidity, and earlier return to activities. However, comprehensive understanding of the anatomy of the posterior ankle is crucial to warrant successful outcomes and minimizing complications. PMID:26409593

  7. Disorders of the Flexor Hallucis Longus and Os Trigonum.

    PubMed

    Rungprai, Chamnanni; Tennant, Joshua N; Phisitkul, Phinit

    2015-10-01

    Os trigonum syndrome with disease of the flexor hallucis longus tendon, so-called stenosing flexor tenosynovitis, is a common cause of posterior ankle impingement. Conservative treatment is the recommended first line of treatment, with secondary treatment options of either open or arthroscopic os trigonum excision with flexor hallucis longus retinaculum release. The arthroscopic approaches have gained popularity in the past decade because of less scarring, less postoperative pain, minimal overall morbidity, and earlier return to activities. However, comprehensive understanding of the anatomy of the posterior ankle is crucial to warrant successful outcomes and minimizing complications.

  8. Chronic exertional compartment syndrome in adductor pollicis muscle: case report.

    PubMed

    Lee, Chang-Hun; Lee, Kwang-Hyun; Lee, Seung-Hun; Kim, Yee-Suk; Chung, Ung-Seo

    2012-11-01

    We report a case of chronic exertional compartment syndrome in the adductor pollicis that was confirmed by measuring elevated compartment pressure. Specific finding of magnetic resonance imaging, increased T2 signal intensity in the involved compartment, was also useful for the diagnosis. Pain was relieved by fasciotomy through a volar approach. PMID:23040640

  9. Stenosing synovitis of the extensor pollicis longus tendon.

    PubMed

    Kardashian, George; Vara, Alexander D; Miller, Stephen J; Miki, Roberto A; Jose, Jean

    2011-06-01

    There are only a few published cases of extensor pollicis longus (EPL) tenosynovitis in patients without rheumatoid arthritis. Even less common are cases of stenosing tenosynovitis of the EPL associated with triggering. This article presents 2 cases of EPL stenosing tenosynovitis with triggering of the thumb in the area of Lister's tubercle and addresses how to treat them. PMID:21636022

  10. Scapholunate stabilization with dynamic extensor carpi radialis longus tendon transfer.

    PubMed

    Peterson, Steven L; Freeland, Alan E

    2010-12-01

    Dynamic extensor carpi radialis longus tendon transfer to the distal pole of the scaphoid acts synchronously and synergistically with wrist motion to restore the slider crank mechanism of the scaphoid after scapholunate interosseous ligament (SLIL) injury. The procedure is designed to simulate a hypothetical dorsal radioscaphoid ligament that more closely approximates the normal viscoelastic forces acting on the scaphoid throughout all phases of wrist motion than does the static checkrein effect and motion limitations of capsulodesis or tenodesis. Extensor carpi radialis longus transfer may be independently sufficient to support normal or near-normal scapholunate and midcarpal kinematics and prevent further injury propagation in patients with partial SLIL tears and dynamic scapholunate instability. Extensor carpi radialis longus transfer alone may improve carpal congruity in patients with static scapholunate instability, but SLIL and dorsal lunate ligament repair or reconstruction is essential for favorable durable outcomes. Extensor carpi radialis longus transfer offers a simple and reasonable alternative to capsulodesis or tenodesis to support these ligament repairs or reconstructions, does not require intercarpal fixation, and allows rehabilitation to proceed expeditiously at approximately 1 month after surgery. PMID:21134618

  11. Bone scanning in the adductor insertion avulsion syndrome ("thigh splints").

    PubMed

    Charkes, N D; Siddhivarn, N; Schneck, C D

    1987-12-01

    Shin splints is a defined clinical entity resulting from extreme tension on muscles inserting on the tibia, resulting in periosteal elevation which is detectable by bone scanning. The clinical equivalent in the thigh has been described. We found scintigraphic changes in the femurs of seven short, female, basic trainees at the Fort Dix Army base, most of whom were referred for stress fractures elsewhere in the lower extremities. The scan findings were generally noted in the upper or mid femurs, always involved the anteromedial cortex, and were bilateral in five of the seven subjects. The abnormalities were linear and suggested periosteal elevation, and did not have the typical appearance of stress fracture. Since the findings correspond to the insertion of one or more adductor muscle groups, the descriptive term "adductor insertion avulsion syndrome" or "thigh splints" is proposed for this entity.

  12. Isolated paralysis of the adductor pollicis: a case report.

    PubMed

    De Maio, F; Bisicchia, S; Farsetti, P; Ippolito, E

    2011-01-01

    We report a case of isolated paralysis of the right adductor pollicis in a 30-year-old woman. Electromyographic study showed involvement of the deep motor branch of the ulnar nerve. A ganglion and an anomalous muscle were both ruled out clinically and by MRI as a possible cause of the paralysis. At surgical exploration, we found a fibrous band joining the pisiform and the hook of the hamate bone that compressed the deep motor branch of the ulnar nerve. The fibrous band was excised, and a neurolysis of the motor branch of the ulnar nerve was performed. At followup, eight months later, the patient had fully recovered strength of the adductor muscle. PMID:21991410

  13. [Abnormal adductor movement of the vocal cords in spasmodic dysphonia].

    PubMed

    Shibusawa, M

    1993-04-01

    Adductor movement of the vocal cords in initial/ke/phonation was recorded using a laryngeal fiberscope, CCD camera, and videocassette recorder. Three patients with adductor spasmodic dysphonia (SD), a 53 year old male and 48 and 52 year old females, and 7 normal volunteers participated in this study. During the examination, the subject sat on a chair holding a microphone about 20 cm away from his or her lips. A laryngeal fiberscope was inserted through either side of the nostril. The tip of the fiberscope was positioned just caudal to the tip of the epiglottis to get a complete view of both sides of the vocal cords. The examiner told the subject to make the speech sound/ke/repeatedly, and to insert a sufficient inspiratory period between each phonation. The vocal cord images were recorded at 30 frames per second and printed successively from several frames ahead of the beginning of adductor movement to the frame of initial adjustment of the membranous part of the vocal cords following a time code indicator. The tips of both sides of the vocal processes and anterior commissure were marked, then, scanned and transported to a personal computer. An imaginary line connecting the vocal process and anterior commissure was drawn on the screen of the computer, which was done on both sides of the vocal cords. Then, an angle made by the two lines was measured in degrees and stored. The time and speed of adductor movement varied among subjects. Normal subjects, however, never failed to finish making the explosive sound in /ke/ before initial vocal cord adjustment.(ABSTRACT TRUNCATED AT 250 WORDS)

  14. The abductor and adductor strength characteristics of professional baseball pitcherse.

    PubMed

    Wilk, K E; Andrews, J R; Arrigo, C A

    1995-01-01

    The purpose of this investigation was to establish a data base regarding the isokinetic muscular performance characteristics of the abductor and adductor muscles of professional baseball pitchers. Eighty-three healthy professional baseball pitchers (mean age, 22.6 years; mean weight, 199 pounds) were evaluated by use of a Biodex isokinetic dynamometer. Isokinetic tests were performed concentrically at 180 and 300 deg/sec for both the throwing and nonthrowing shoulders. The testing protocol and test repetitions were standardized for each subject. Statistical analysis was performed using a paired t-test. Determination of the correlation coefficient was made at the P < 0.05 level of significance. Test results for bilateral comparisons of mean peak torque for the throwing and nonthrowing shoulders demonstrated a significant difference in adductor values between the dominant and nondominant shoulders at both test speeds. There were no significant differences between extremities for the shoulder abductor muscles. The abductor-to-adductor muscle ratios between the throwing and nonthrowing shoulders were also statistically significant at both test speeds. Throwing arm values were 82.5% at 180 deg/sec and 93.8% at 300 deg/sec compared with only 66.0% and 70.3%, respectively, for the nonthrowing shoulders.

  15. Entrapment of the flexor hallucis longus tendon following ankle arthrodesis.

    PubMed

    Keith, Troy; Robinson, Andrew H N

    2016-03-01

    Impingement following arthroscopic ankle arthrodesis has not been reported in the literature previously. We present a case report of a 68-year-old male 9 months following an uncomplicated arthroscopic ankle fusion presenting with persistent posteromedial ankle pain. Flexor hallucis longus (FHL) tendon impingement resulting from a prominent os trigonum was identified. This was successfully treated utilising hindfoot endoscopy with excision of the os trigonum and FHL release.

  16. Flexor Digitorum Accessorius Longus: Importance of Posterior Ankle Endoscopy.

    PubMed

    Batista, Jorge Pablo; Del Vecchio, Jorge Javier; Golanó, Pau; Vega, Jordi

    2015-01-01

    Endoscopy for the posterior region of the ankle through two portals is becoming more widespread for the treatment of a large number of conditions which used to be treated with open surgery years ago. The tendon of the flexor hallucis longus (FHL) travels along an osteofibrous tunnel between the posterolateral and posteromedial tubercles of the talus. Chronic inflammation of this tendon may lead to painful stenosing tenosynovitis. The aim of this report is to describe two cases depicting an accessory tendon which is an anatomical variation of the flexor hallucis longus in patients with posterior friction syndrome due to posterior ankle impingement and associated with a posteromedial osteochondral lesion of the talus. The anatomical variation (FDAL) described was a finding during an endoscopy of the posterior region of the ankle, and we have spared it by sectioning the superior flexor retinaculum only. The accessory flexor digitorum longus is an anatomical variation and should be taken into account when performing an arthroscopy of the posterior region of the ankle. We recommend this treatment on this type of injury although we admit this does not make a definite conclusion. PMID:26060592

  17. Flexor Digitorum Accessorius Longus: Importance of Posterior Ankle Endoscopy

    PubMed Central

    Batista, Jorge Pablo; del Vecchio, Jorge Javier; Golanó, Pau; Vega, Jordi

    2015-01-01

    Endoscopy for the posterior region of the ankle through two portals is becoming more widespread for the treatment of a large number of conditions which used to be treated with open surgery years ago. The tendon of the flexor hallucis longus (FHL) travels along an osteofibrous tunnel between the posterolateral and posteromedial tubercles of the talus. Chronic inflammation of this tendon may lead to painful stenosing tenosynovitis. The aim of this report is to describe two cases depicting an accessory tendon which is an anatomical variation of the flexor hallucis longus in patients with posterior friction syndrome due to posterior ankle impingement and associated with a posteromedial osteochondral lesion of the talus. The anatomical variation (FDAL) described was a finding during an endoscopy of the posterior region of the ankle, and we have spared it by sectioning the superior flexor retinaculum only. The accessory flexor digitorum longus is an anatomical variation and should be taken into account when performing an arthroscopy of the posterior region of the ankle. We recommend this treatment on this type of injury although we admit this does not make a definite conclusion. PMID:26060592

  18. Bone Scanning in the Adductor Insertion Avulsion Syndrome

    PubMed Central

    Mahajan, Madhuri Shimpi

    2013-01-01

    A thigh splint (adductor insertion avulsion syndrome) is a relatively uncommon diagnosis analogous to shin splints. This article reports a 19-year-old female patient NOT a regular athlete who presented with groin pain. Physical examination was non-specific; magnetic resonance imaging pelvis did not reveal any abnormality. Patient referred for whole body bone scan, especially to locate any abnormality in the spine. This study highlights the role of whole body bone scan in the evaluation of groin pain and importance of evaluation of whole lower extremity. PMID:25126001

  19. Heat treatment of scallop adductor muscle using superheated steam.

    PubMed

    Abe, T; Miyashita, K

    2007-08-01

    Scallop (Patinopecten yessoensis) adductor muscles were heated using superheated steam (150 and 200 degrees C), boiling (98 degrees C), and normal steaming (95 degrees C). The amounts of amino acids, water-soluble peptides, and nucleotides, expressed as extractive nitrogen in scallop products, are very important elements of quality and taste. After 15-min heating of scallop muscles with normal steaming and boiling, respective losses of 50% and 64% of the extractive nitrogen were observed. However, most extractive nitrogen (> 86%) remained in the scallop muscles treated with superheated steam at 150 and 200 degrees C. Protective effects of superheated steam against elution loss of nitrogen compounds were also observed in amino acid analyses of the heated products. The scallop-muscle surface temperature during treatment with superheated steam increased more quickly than that with normal steaming and boiling. The rapid water loss and the surface protein denaturation engendered formation of a 30-mum-thick film covering the surface, which prevented extractive nitrogen loss from internal tissues. Superheated steam treatment at 200 degrees C caused browning, surface shrinkage, and 47% weight loss. In marked contrast, the appearance and the weight loss of sample treated at 150 degrees C were almost the same as those of normal steaming and boiling-treated samples. These results suggested that superheated steaming at 150 degrees C is an optimal heat treatment of scallop adductor muscles.

  20. Heat treatment of scallop adductor muscle using superheated steam.

    PubMed

    Abe, T; Miyashita, K

    2007-08-01

    Scallop (Patinopecten yessoensis) adductor muscles were heated using superheated steam (150 and 200 degrees C), boiling (98 degrees C), and normal steaming (95 degrees C). The amounts of amino acids, water-soluble peptides, and nucleotides, expressed as extractive nitrogen in scallop products, are very important elements of quality and taste. After 15-min heating of scallop muscles with normal steaming and boiling, respective losses of 50% and 64% of the extractive nitrogen were observed. However, most extractive nitrogen (> 86%) remained in the scallop muscles treated with superheated steam at 150 and 200 degrees C. Protective effects of superheated steam against elution loss of nitrogen compounds were also observed in amino acid analyses of the heated products. The scallop-muscle surface temperature during treatment with superheated steam increased more quickly than that with normal steaming and boiling. The rapid water loss and the surface protein denaturation engendered formation of a 30-mum-thick film covering the surface, which prevented extractive nitrogen loss from internal tissues. Superheated steam treatment at 200 degrees C caused browning, surface shrinkage, and 47% weight loss. In marked contrast, the appearance and the weight loss of sample treated at 150 degrees C were almost the same as those of normal steaming and boiling-treated samples. These results suggested that superheated steaming at 150 degrees C is an optimal heat treatment of scallop adductor muscles. PMID:17995678

  1. Stabilization of medial longitudinal foot arch by peroneus longus transfer.

    PubMed

    Lui, T H

    2016-06-01

    The mechanical integrity of the medial longitudinal arch depends on the dynamic support of muscles and the static support of ligaments. Although the posterior tibial tendon is the main dynamic stabilizer of the arch, the static structures provide the most support especially while the person is standing. After rupture of the posterior tibial tendon, the spring ligament may be compromised under increased stress and leads to talar derotation and peritalar subluxation. Surgical repair of the spring ligament has become an important adjunct to treating posterior tibial tendon abnormalities. A technique of peroneus longus transfer to augment the static stabilizers of the medial column is described in this article. PMID:27058034

  2. Hypertrophy of palmaris longus muscle, a rare anatomic aberration.

    PubMed

    Barkáts, N

    2015-01-01

    The palmaris longus muscle (PLM) is considered to be a phylogenetically degenerate muscle. For many authors, this may be the cause of its great variability. The loss of function in the PLM makes it an important muscle in plastic and reconstructive surgery. During a study of PLM agenesis rate in the Hungarian population, a 22-year-old female showed an unusual pattern of muscles in her left forearm, which was found to be a hypertrophied PLM. The hypertrophied muscle was causing symptoms of median and ulnar nerve compression.

  3. Radiographic and ultrasonographic diagnosis of stenosing tenosynovitis of the abductor pollicis longus muscle in dogs.

    PubMed

    Hittmair, Katharina M; Groessl, Veronika; Mayrhofer, Elisabeth

    2012-01-01

    Stenosing tenosynovitis of the abductor pollicis longus muscle causes chronic front limb lameness in dogs. The lesion, similar to de Quervain's tenosynovitis in people, is caused by repetitive movements of the carpus. Thirty dogs with front limb lameness, painful carpal flexion, and a firm soft tissue swelling medial to the carpus were examined prospectively. Seven dogs had bilateral abductor pollicis longus tenosynovitis. Radiographs of the carpus were characterized by a deeper radiolucent medial radial sulcus and bony proliferations medial and slightly cranial to the distal radius, resulting in stenosis of the tendon sheath and subsequent tendinitis. Ultrasonographic examination of the firm soft tissue swelling medial to the carpus was characterized by an irregular hypoechoic abductor pollicis longus tendon or tendinitis in 22 of 37 dogs. Nineteen of 37 abductor pollicis longus tendon sheaths were fluid-filled and all tendon sheaths were thickened, more hyperechoic, with small hyperechoic mineralizations embedded in the connective tissue of the abductor pollicis longus tendon sheath in 25 dogs. Enthesopathy of the abductor pollicis longus tendon was identified in seven dogs. While radiographs of stenosing tenosynovitis of the abductor pollicis longus are helpful in visualizing the deep radial sulcus and osteophytes medial to the distal radius, ultrasonography is useful to distinguish between lesions of the tendon or tendon sheath and to determine thickness and fluid content of the abductor pollicis longus tendon sheath. PMID:22118578

  4. Partial peroneus longus tendon rupture in professional basketball players: a report of 2 cases.

    PubMed

    Cooper, Mitchell E; Selesnick, F Harlan; Murphy, Brian J

    2002-12-01

    Partial tears of the peroneal tendons are rare. Partial longitudinal tears of the peroneus longus tendon are even more rare. We report on 2 professional basketball players who had partial peroneus longus tendon tears beneath the cuboid. A literature review and discussion of treatment is included.

  5. Subcutaneous rupture of the flexor hallucis longus tendon: a case report.

    PubMed

    Noda, Daisuke; Yoshimura, Ichiro; Kanazawa, Kazuki; Hagio, Tomonobu; Naito, Masatoshi

    2012-01-01

    It is well known that rupture of the flexor hallucis longus tendon can be associated with open injuries and that closed rupture of the flexor hallucis longus tendon is rare. Tendon injuries of the foot can occur secondary to direct, indirect, or repetitive injury. Repetitive tendon injuries can cause tendinitis or stenosing tenosynovitis. Tendinitis is associated with internal tendon injury that can present with tendon thickening, mucinoid degeneration, nodule development, or in situ partial tears. Stenosing tenosynovitis is the development of tendon adhesions within the tendon sheath that interfere with tendon gliding, known as trigger toe. The flexor hallucis longus tendon is susceptible to injury along its entire course. A total of 35 cases of complete or partial closed ruptures of the flexor hallucis longus tendon have been reported. We present the case of complete subcutaneous rupture of the flexor hallucis longus tendon associated with trauma at the proximal phalangeal head. PMID:22153296

  6. Absence of the flexor digitorum longus tendon: an MRI study.

    PubMed

    Magra, Merzesh; Taqvi, Syed; Cooper, Robert; Blundell, Chris M; Davies, Mark B

    2012-11-01

    Flexor digitorum longus (FDL) is the primary flexor of the lateral four toes. It is a reliable source of tendon for transfer surgery. We present a case whereby a patient who required a reconstruction for adult acquired flatfoot deformity using FDL as a dynamic structure for transfer was found to have an absent FDL tendon at the time of operation, necessitating the use of flexor hallucis longus (FHL) instead. This unusual finding prompted us to investigate the frequency of absence of the FDL tendon. We reviewed our hospital MRI database of foot and ankle images specifically looking for patients with absence of this tendon. After randomization, 756 images were reviewed independently by two surgeons and a consultant musculoskeletal radiologist. No instances of an absent FDL tendon were identified. In conclusion, the frequency of absence of the FDL tendon is less than 1 in 750. Surgeons who require FDL for tendon transfer surgery need not image the foot preoperatively to anticipate the need for the use of FHL as an alternative. PMID:22334461

  7. Changes in Adductor Strength After Competition in Academy Rugby Union Players.

    PubMed

    Roe, Gregory A B; Phibbs, Padraic J; Till, Kevin; Jones, Ben L; Read, Dale B; Weakley, Jonathon J; Darrall-Jones, Joshua D

    2016-02-01

    This study determined the magnitude of change in adductor strength after a competitive match in academy rugby union players and examined the relationship between locomotive demands of match-play and changes in postmatch adductor strength. A within-subject repeated measures design was used. Fourteen academy rugby union players (age, 17.4 ± 0.8 years; height, 182.7 ± 7.6 cm; body mass, 86.2 ± 11.6 kg) participated in the study. Each player performed 3 maximal adductor squeezes at 45° of hip flexion before and immediately, 24, 48, and 72 hours postmatch. Global positioning system was used to assess locomotive demands of match-play. Trivial decreases in adductor squeeze scores occurred immediately (-1.3 ± 2.5%; effect size [ES] = -0.11 ± 0.21; likely, 74%) and 24 hours after match (-0.7 ± 3%; ES = -0.06 ± 0.25; likely, 78%), whereas a small but substantial increase occurred at 48 hours (3.8 ± 1.9%; ES = 0.32 ± 0.16; likely, 89%) before reducing to trivial at 72 hours after match (3.1 ± 2.2%; ES = 0.26 ± 0.18; possibly, 72%). Large individual variation in adductor strength was observed at all time points. The relationship between changes in adductor strength and distance covered at sprinting speed (VO2max ≥ 81%) was large immediately postmatch (p = 0.056, r = -0.521), moderate at 24 hours (p = 0.094, r = -0.465), and very large at 48 hours postmatch (p = 0.005, r = -0.707). Players who cover greater distances sprinting may suffer greater adductor fatigue in the first 48 hours after competition. The assessment of adductor strength using the adductor squeeze test should be considered postmatch to identify players who may require additional rest before returning to field-based training.

  8. Extensibility of hip adductors in children with cerebral palsy.

    PubMed

    Lespargot, A; Renaudin, E; Khouri, N; Robert, M

    1994-11-01

    The passive extension of relaxed hip adductor muscles was measured in 20 normal children and 10 children (aged nine to 13 years) with cerebral palsy (CP) by a method that could distinguish between shortening of the muscle body and tendon. No muscle-body contracture occurred in the children with CP during treatment (physiotherapy plus moderate stretching on an apparatus for six hours a day); only the tendons were short. However, four children showed signs of muscle-body contracture after interrupting treatment for six to eight weeks. It is possible that muscle-body contracture can be prevented by non-surgical methods, although tendon shortening can, at present, only be treated surgically.

  9. Evolutionary Trends in the Jaw Adductor Mechanics of Ornithischian Dinosaurs.

    PubMed

    Nabavizadeh, Ali

    2016-03-01

    Jaw mechanics in ornithischian dinosaurs have been widely studied for well over a century. Most of these studies, however, use only one or few taxa within a given ornithischian clade as a model for feeding mechanics across the entire clade. In this study, mandibular mechanical advantages among 52 ornithischian genera spanning all subclades are calculated using 2D lever arm methods. These lever arm calculations estimate the effect of jaw shape and difference in adductor muscle line of action on relative bite forces along the jaw. Results show major instances of overlap between taxa in tooth positions at which there was highest mechanical advantage. A relatively low bite force is seen across the tooth row among thyreophorans (e.g., stegosaurs and ankylosaurs), with variation among taxa. A convergent transition occurs from a more evenly distributed bite force along the jaw in basal ornithopods and basal marginocephalians to a strong distal bite force in hadrosaurids and ceratopsids, respectively. Accordingly, adductor muscle vector angles show repeated trends from a mid-range caudodorsal orientation in basal ornithischians to a decrease in vector angles indicating more caudally oriented jaw movements in derived taxa (e.g., derived thyreophorans, basal ornithopods, lambeosaurines, pachycephalosaurs, and derived ceratopsids). Analyses of hypothetical jaw morphologies were also performed, indicating that both the coronoid process and lowered jaw joint increase moment arm length therefore increasing mechanical advantage of the jaw apparatus. Adaptive trends in craniomandibular anatomy show that ornithischians evolved more complex feeding apparatuses within different clades as well as morphological convergences between clades. PMID:26692539

  10. Peroneus longus transfer for drop foot in Hansen disease.

    PubMed

    Cohen, Jose Carlos; de Freitas Cabral, Elifaz

    2012-09-01

    Leprosy or Hansen's disease is a chronic infectious disease caused by the Mycobacterium leprae. Nerve injury is a central feature of the pathogenesis of leprosy that results in autonomic, sensory and motor neuropathy. One of the most common secondary disabilities caused by Hansen's disease is the drop foot and it is found in 2% to 5% of newly-diagnosed leprosy patients. Unlike the clinical picture of traumatic injury of the common peroneal nerve where both of its branches (the deep peroneal nerve and the superficial peroneal nerve) are involved, in leprosy there is the possibility of isolated involvement of the deep peroneal nerve branch, sparing the superficial peroneal branch. The article discusses the advantages of using the peroneus longus tendon transfer to the dorsum of the foot instead of the posterior tibial tendon for the correction of dropfoot in selected cases where the peroneals tendons are intact. PMID:22938641

  11. Preferential denervation of the adductor muscles of the equine larynx. I: Muscle pathology.

    PubMed

    Duncan, I D; Amundson, J; Cuddon, P A; Sufit, R; Jackson, K F; Lindsay, W A

    1991-03-01

    The laryngeal muscles of 18 horses were examined histologically. The neurogenic changes found in each muscle were scored by four reviewers and the results evaluated statistically. Fifteen of these horses had endoscopic evidence of abnormal laryngeal function, three of which were defined as having adductor paralysis. Measurement of muscle fibre area in two horses with idiopathic laryngeal hemiplegia (ILH) was performed. In the quantitative study of neurogenic change, the adductor muscles were more significantly affected than the abductor muscle. This was also true in the clinical cases of ILH where measurement of muscle fibre area demonstrated that the lateral cricoarytenoid (adductor) muscles showed a wider range of pathological changes than the dorsal cricoarytenoid muscle (abductor). Those horses with the most severe muscle pathology also had the most abnormal endoscopic findings. The propensity for denervation of the adductor muscles should provide clues as to the pathogenesis and natural history of horses with sub-clinical laryngeal disease and ILH.

  12. Tear of peroneus longus in long distance runners due to enlarged peroneal tubercle

    PubMed Central

    2014-01-01

    Background Tear of the Peroneus longus in association with a prominent peroneal tubercle is rare. Case presentation Recently we treated two long distance runners who developed lateral ankle pain. Maximum tenderness was located over the lateral surface of the heel in the area of the peroneal tendons. Imaging disclosed a tear of the peroneus longus at the area of the peroneal tubercle. Conclusion Following resection of the peroneal tubercle and repair of the peroneus longus, both patients regained full activity with no pain. This report describes the clinical presentation and surgical management of this rare injury. PMID:24417809

  13. Extensor digitorum longus tenosynovitis caused by talar head impingement in an ultramarathon runner: a case report.

    PubMed

    Kobayashi, H; Sakurai, M; Kobayashi, T

    2007-08-01

    Stenosing tenosynovitis of the extensor digitorum longus tendon is an injury related to ultramarathon running. A 32-year-old male ultramarathon runner developed chronic tenosynovitis of the ankle dorsiflexors. He was diagnosed with extensor digitorum longus tenosynovitis caused by talar head impingement associated with exostosis. He failed to respond to non-operative management and decided to undergo tenosynovectomy of the extensor digitorum longus tendon. The pain was relieved without functional disturbance of the foot and ankle, and the patient returned to running 3 weeks postoperatively. At the 2-year follow-up, he was participating fully in ultramarathons. PMID:17709872

  14. [Flexor hallucis longus tendon rupture as an impingement lesion induced by os trigonum instability].

    PubMed

    Lohrer, H

    2006-03-01

    A Flexor hallucis longus tendon lesion induced by an unstable Os trigonum has not been described heretofore. A 39 years old karateka complained increasing load induced pain at the posteromedial ankle. Because of this, he was unable to take part in sports activities. Clinical, X-ray and MRI investigation assumed a Flexor hallucis longus tendon tear induced by an impingeing Os trigonum. At surgery a longitudinal and a partial transverse tendon tear was present. The Flexor hallucis longus tendon pulley was narrowed by a partially unstable Os trigonum. Tendon reconstruction, Os trigonum removal and early functional posttreatment resulted in full ability in sport, leisure-time activities and profession five months later.

  15. Intrarater Reliability of the Adductor Squeeze Test in Gaelic Games Athletes

    PubMed Central

    Delahunt, Eamonn; McEntee, Barry L.; Kennelly, Colm; Green, Brian S.; Coughlan, Garrett F.

    2011-01-01

    Context: Groin pain is commonly experienced by athletes involved in field-based sports and is particularly prevalent in Gaelic Games athletes. The adductor squeeze test is commonly used in the assessment of groin pain and injuries. To date, no evidence in the literature provides the reliability of the adductor squeeze test using a sphygmomanometer in assessing the adductor muscle integrity of Gaelic Games athletes. Given the high proportion of groin pain encountered in Gaelic Games athletes, establishing the reliability of the adductor squeeze test will allow clinicians to monitor injury responses and to assess return-to-play criteria. Objective: To evaluate the intrarater reliability of a commercially available sphygmomanometer for measuring adductor squeeze values in Gaelic Games athletes and to determine if different squeeze values are associated with the 3 commonly used test positions. Design: Descriptive laboratory study. Setting: University clinical skills laboratory. Patients or Other Participants: Eighteen male Gaelic Games athletes without any previous or current history of groin or pelvic pain. Intervention(s): Each participant performed the adductor squeeze test in 3 positions of hip joint flexion (0°, 45°, and 90°) on 2 test days separated by at least 1 week. Main Outcome Measure(s): Adductor squeeze test values (mm Hg) quantified by a commercially available sphygmomanometer. Results: Intrarater reliability intraclass correlation values ranged from 0.89 to 0.92 (intraclass correlation coefficients were 0°, 0.89; 45°, 0.92; and 90°, 0.90). The highest squeeze values were recorded in the 45° of hip flexion test position, and these values differed from those demonstrated in the 0° and 90° hip flexion test positions (P < .05). Conclusions: A commercially available sphygmomanometer is a reliable device for measuring adductor squeeze test values. PMID:21669092

  16. Preferential denervation of the adductor muscles of the equine larynx. II: Nerve pathology.

    PubMed

    Duncan, I D; Reifenrath, P; Jackson, K F; Clayton, M

    1991-03-01

    The terminal branches of the recurrent laryngeal nerve (RLN) of three normal ponies and six horses with sub-clinical laryngeal disease were examined qualitatively and quantitatively in an attempt to explain the preferential denervation of the laryngeal adductor muscles in the neuropathy of idiopathic laryngeal hemiplegia (ILH). The myelinated fibre spectra of all the motor nerve fibres in the left and right abductor and adductor branches of the RLN in three normal ponies were measured. The density of myelinated fibres was also calculated. There was no significant difference between the larger group of myelinated fibres in the adductor or abductor branches. In the six horses with laryngeal hemiparesis, however, there was a marked preferential loss of the medium/large size myelinated fibres in the left adductor branch, although nerve fibre densities were not significantly different. While no simple morphometrical feature was found to explain the selective muscle denervation, the greater loss of large diameter myelinated fibres in the adductor branches confirms the earlier observation of adductor muscle susceptibility in the neuropathy of ILH.

  17. Os trigonum syndrome with flexor hallucis longus tenosynovitis in a professional football referee.

    PubMed

    Cooper, M E; Wolin, P M

    1999-07-01

    The presentation of posterior ankle pain in any patient poses a diagnostic dilemma. The os trigonum syndrome and flexor hallucis longus stenosing tenosynovitis have been reported to occur in professional and amateur ballet dancers. It is important to consider these diagnoses in a patient who is not a dancer, as is shown in the case presented here. The patient in this case is a professional referee who injured his ankle while working on artificial turf. The treatment for os trigonum syndrome and flexor hallucis longus tenosynovitis is initially conservative, but in refractory cases, surgical removal of the os and release of the flexor hallucis longus tendon can be successfully performed. This is the first reported case of os trigonum syndrome and flexor hallucis longus tenosynovitis presenting simultaneously in a patient who is not a dancer.

  18. The hip adductor muscle group in caviomorph rodents: anatomy and homology.

    PubMed

    García-Esponda, César M; Candela, Adriana M

    2015-06-01

    Anatomical comparative studies including myological data of caviomorph rodents are relatively scarce, leading to a lack of use of muscular features in cladistic and morphofunctional analyses. In rodents, the hip adductor muscles constitute an important group of the hindlimb musculature, having an important function during the beginning of the stance phase. These muscles are subdivided in several distinct ways in the different clades of rodents, making the identification of their homologies hard to establish. In this contribution we provide a detailed description of the anatomical variation of the hip adductor muscle group of different genera of caviomorph rodents and identify the homologies of these muscles in the context of Rodentia. On this basis, we identify the characteristic pattern of the hip adductor muscles in Caviomorpha. Our results indicate that caviomorphs present a singular pattern of the hip adductor musculature that distinguishes them from other groups of rodents. They are characterized by having a single m. adductor brevis that includes solely its genicular part. This muscle, together with the m. gracilis, composes a muscular sheet that is medial to all other muscles of the hip adductor group. Both muscles probably have a synergistic action during locomotion, where the m. adductor brevis reinforces the multiple functions of the m. gracilis in caviomorphs. Mapping of analyzed myological characters in the context of Rodentia indicates that several features are recovered as potential synapomorphies of caviomorphs. Thus, analysis of the myological data described here adds to the current knowledge of caviomorph rodents from anatomical and functional points of view, indicating that this group has features that clearly differentiate them from other rodents. PMID:25911542

  19. Extensor Pollicis Longus Rupture after Mini TightRope Suspensionplasty.

    PubMed

    Seetharaman, Mani; Vitale, Mark A; Desai, Kapil; Crowe, John F

    2016-05-01

    Background Arthritis of the first carpometacarpal (CMC) joint has been surgically treated in multiple ways with varying levels of success as measured by subjective and objective measures. Trapeziectomy with numerous variations in suspensionplasty comprises one of the more commonly used surgical procedures. Recently, the Mini TightRope apparatus has been utilized as a new method for achieving suspensionplasty, and as such lacks significant review of use and safety in the literature. Case Description An extensor pollicis longus (EPL) rupture following a trapeziectomy and Mini TightRope suspensionplasty for CMC arthritis of the thumb is presented. The patient successfully underwent an extensor indicis proprius (EIP) to EPL transfer to treat this complication. Literature Review There is well-established documentation of injury to the extensor tendons from orthopedic hardware such as volar locking plates. Regarding use of the Mini TightRope apparatus, guidelines for placement of the suture button include caution to place the button away from the EPL tendon to minimize the chance of tendon irritation. Additionally, FiberWire sutures, a component of the apparatus, have been shown to demonstrate soft tissue reactions with adjacent inflammatory response. Published reports on adverse events utilizing this device have been limited to case reports including an index metacarpal fracture. Clinical Relevance The aim of this case report was to cite an occurrence of EPL rupture following its use and discuss the possibilities of its direct contribution. PMID:27104081

  20. Changes in Adductor Strength After Competition in Academy Rugby Union Players.

    PubMed

    Roe, Gregory A B; Phibbs, Padraic J; Till, Kevin; Jones, Ben L; Read, Dale B; Weakley, Jonathon J; Darrall-Jones, Joshua D

    2016-02-01

    This study determined the magnitude of change in adductor strength after a competitive match in academy rugby union players and examined the relationship between locomotive demands of match-play and changes in postmatch adductor strength. A within-subject repeated measures design was used. Fourteen academy rugby union players (age, 17.4 ± 0.8 years; height, 182.7 ± 7.6 cm; body mass, 86.2 ± 11.6 kg) participated in the study. Each player performed 3 maximal adductor squeezes at 45° of hip flexion before and immediately, 24, 48, and 72 hours postmatch. Global positioning system was used to assess locomotive demands of match-play. Trivial decreases in adductor squeeze scores occurred immediately (-1.3 ± 2.5%; effect size [ES] = -0.11 ± 0.21; likely, 74%) and 24 hours after match (-0.7 ± 3%; ES = -0.06 ± 0.25; likely, 78%), whereas a small but substantial increase occurred at 48 hours (3.8 ± 1.9%; ES = 0.32 ± 0.16; likely, 89%) before reducing to trivial at 72 hours after match (3.1 ± 2.2%; ES = 0.26 ± 0.18; possibly, 72%). Large individual variation in adductor strength was observed at all time points. The relationship between changes in adductor strength and distance covered at sprinting speed (VO2max ≥ 81%) was large immediately postmatch (p = 0.056, r = -0.521), moderate at 24 hours (p = 0.094, r = -0.465), and very large at 48 hours postmatch (p = 0.005, r = -0.707). Players who cover greater distances sprinting may suffer greater adductor fatigue in the first 48 hours after competition. The assessment of adductor strength using the adductor squeeze test should be considered postmatch to identify players who may require additional rest before returning to field-based training. PMID:26815174

  1. Thickness of the adductor pollicis muscle in nutritional assessment of surgical patients

    PubMed Central

    Valente, Katarina Papera; Silva, Naira Marceli Fraga; Faioli, Amanda Barcelos; Barreto, Marina Abelha; de Moraes, Rafael Araújo Guedes; Guandalini, Valdete Regina

    2016-01-01

    ABSTRACT Objective To evaluate the correlation between thickness of the muscle adductor pollicis and anthropometric measurements, body mass index and Subjective Global Assessment in the nutritional assessment of surgical patients. Methods The study population comprised patients admitted to the general and reconstructive surgery unit of a university hospital in the city of Vitória (ES), Brazil. The inclusion criteria were patients evaluated in the first 48 hours of admission, aged ≥20 years, hemodynamically stable, with no edema or ascites. Data analysis was performed using the software Statistical Package for Social Science 21.0, significance level of 5%. Results The sample consisted of 150 patients that were candidates to surgery, mean age of 42.7±12.0 years. The most common reasons for hospitalization were surgical procedures, gastrintestinal diseases and neoplasm. Significant association was observed between thickness of adductor pollicis muscle and Subjective Global Assessment (p=0.021) and body mass index (p=0.008) for nutritional risk. Significant correlation was found between thickness of adductor pollicis muscle and arm muscle circumference, corrected arm muscle area, calf circumference and body mass index. There were no significant correlations between thickness of adductor pollicis muscle and triceps skinfold and age. Conclusion The use of thickness of adductor pollicis muscle proved to be an efficient method to detect malnutrition in surgical patients and it should be added to the screening process of hospitalized patients, since it is easy to perform, inexpensive and noninvasive. PMID:27074229

  2. Delayed quadriceps weakness after continuous adductor canal block for total knee arthroplasty: a case report.

    PubMed

    Veal, Christopher; Auyong, David B; Hanson, Neil A; Allen, Cindy J; Strodtbeck, Wyndam

    2014-03-01

    Adductor canal catheters have been shown to improve analgesia while maintaining quadriceps strength after total knee arthroplasty. We describe a patient who underwent total knee arthroplasty that likely had delayed quadriceps weakness as a result of a standard continuous 0.2% ropivacaine infusion at 8 ml/h within the adductor canal. On the day of surgery, the patient was able to stand and ambulate with minimal assistance. On the first post-operative day after surgery, approximately 20 h after starting the ropivacaine infusion, profound weakness of the quadriceps was noted with no ability to stand. Contrast subsequently injected through the adductor canal catheter under fluoroscopy revealed proximal spread approaching the common femoral nerve with as little as 2 ml of volume. This rare case of profound quadriceps weakness after a continuous adductor canal block reveals that local anaesthetic at the adductor canal can spread in a retrograde fashion towards the common femoral nerve, potentially resulting in quadriceps weakness. PMID:24372058

  3. The connective tissue of the adductor canal--a morphological study in fetal and adult specimens.

    PubMed

    de Oliveira, Flavia; de Vasconcellos Fontes, Ricardo Bragança; da Silva Baptista, Josemberg; Mayer, William Paganini; de Campos Boldrini, Silvia; Liberti, Edson Aparecido

    2009-03-01

    The adductor canal is a conical or pyramid-shaped pathway that contains the femoral vessels, saphenous nerve and a varying amount of fibrous tissue. It is involved in adductor canal syndrome, a claudication syndrome involving young individuals. Our objective was to study modifications induced by aging on the connective tissue and to correlate them to the proposed pathophysiological mechanism. The bilateral adductor canals and femoral vessels of four adult and five fetal specimens were removed en bloc and analyzed. Sections 12 microm thick were obtained and the connective tissue studied with Sirius Red, Verhoeff, Weigert and Azo stains. Scanning electron microscopy (SEM) photomicrographs of the surfaces of each adductor canal were also analyzed. Findings were homogeneous inside each group. The connective tissue of the canal was continuous with the outer layer of the vessels in both groups. The pattern of concentric, thick collagen type I bundles in fetal specimens was replaced by a diffuse network of compact collagen bundles with several transversal fibers and an impressive content of collagen III fibers. Elastic fibers in adults were not concentrated in the thick bundles but dispersed in line with the transversal fiber system. A dynamic compression mechanism with or without an evident constricting fibrous band has been proposed previously for adductor canal syndrome, possibly involving the connective tissue inside the canal. The vessels may not slide freely during movement. These age-related modifications in normal individuals may represent necessary conditions for this syndrome to develop.

  4. The connective tissue of the adductor canal – a morphological study in fetal and adult specimens

    PubMed Central

    de Oliveira, Flavia; de Vasconcellos Fontes, Ricardo Bragança; da Silva Baptista, Josemberg; Mayer, William Paganini; de Campos Boldrini, Silvia; Liberti, Edson Aparecido

    2009-01-01

    The adductor canal is a conical or pyramid-shaped pathway that contains the femoral vessels, saphenous nerve and a varying amount of fibrous tissue. It is involved in adductor canal syndrome, a claudication syndrome involving young individuals. Our objective was to study modifications induced by aging on the connective tissue and to correlate them to the proposed pathophysiological mechanism. The bilateral adductor canals and femoral vessels of four adult and five fetal specimens were removed en bloc and analyzed. Sections 12 µm thick were obtained and the connective tissue studied with Sirius Red, Verhoeff, Weigert and Azo stains. Scanning electron microscopy (SEM) photomicrographs of the surfaces of each adductor canal were also analyzed. Findings were homogeneous inside each group. The connective tissue of the canal was continuous with the outer layer of the vessels in both groups. The pattern of concentric, thick collagen type I bundles in fetal specimens was replaced by a diffuse network of compact collagen bundles with several transversal fibers and an impressive content of collagen III fibers. Elastic fibers in adults were not concentrated in the thick bundles but dispersed in line with the transversal fiber system. A dynamic compression mechanism with or without an evident constricting fibrous band has been proposed previously for adductor canal syndrome, possibly involving the connective tissue inside the canal. The vessels may not slide freely during movement. These age-related modifications in normal individuals may represent necessary conditions for this syndrome to develop. PMID:19245505

  5. Activation-induced force enhancement in human adductor pollicis.

    PubMed

    Oskouei, Ali E; Herzog, Walter

    2009-10-01

    It has been known for a long time that the steady-state isometric force after muscle stretch is bigger than the corresponding force obtained in a purely isometric contraction for electrically stimulated and maximal voluntary contractions (MVC). Recent studies using sub-maximal voluntary contractions showed that force enhancement only occurred in a sub-group of subjects suggesting that force enhancement for sub-maximal voluntary contractions has properties different from those of electrically-induced and maximal voluntary contractions. Specifically, force enhancement for sub-maximal voluntary contractions may contain an activation-dependent component that is independent of muscle stretching. To address this hypothesis, we tested for force enhancement using (i) sub-maximal electrically-induced contractions and stretch and (ii) using various activation levels preceding an isometric reference contraction at 30% of MVC (no stretch). All tests were performed on human adductor pollicis muscles. Force enhancement following stretching was found for all subjects (n=10) and all activation levels (10%, 30%, and 60% of MVC) for electrically-induced contractions. In contrast, force enhancement at 30% of MVC, preceded by 6s of 10%, 60%, and 100% of MVC was only found in a sub-set of the subjects and only for the 60% and 100% conditions. This result suggests that there is an activation-dependent force enhancement for some subjects for sub-maximal voluntary contractions. This activation-dependent force enhancement was always smaller than the stretch-induced force enhancement obtained at the corresponding activation levels. Active muscle stretching increased the force enhancement in all subjects, independent whether they showed activation dependence or not. It appears that post-activation potentiation, and the associated phosphorylation of the myosin light chains, might account for the stretch-independent force enhancement observed here.

  6. A retrospective comparative provider workload analysis for femoral nerve and adductor canal catheters following knee arthroplasty.

    PubMed

    Rasmussen, Michael; Kim, Eugenia; Kim, T Edward; Howard, Steven K; Mudumbai, Seshadri; Giori, Nicholas J; Woolson, Steven; Ganaway, Toni; Mariano, Edward R

    2015-04-01

    Adductor canal catheters preserve quadriceps strength better than femoral nerve catheters and may facilitate postoperative ambulation following total knee arthroplasty. However, the effect of this newer technique on provider workload, if any, is unknown. We conducted a retrospective provider workload analysis comparing these two catheter techniques; all other aspects of the clinical pathway remained the same. The primary outcome was number of interventions recorded per patient postoperatively. Secondary outcomes included infusion duration, ambulation distance, opioid consumption, and hospital length of stay. Adductor canal patients required a median (10-90th percentiles) of 0.0 (0.0-2.6) interventions compared to 1.0 (0.3-3.0) interventions for femoral patients (p < 0.001); 18/23 adductor canal patients (78 %) compared to 2/22 femoral patients (9 %) required no interventions (p < 0.001). Adductor canal catheter infusions lasted 2.0 (1.4-2.0) days compared to 1.5 (1.0-2.7) days in the femoral group (p = 0.016). Adductor canal patients ambulated further [mean (SD)] than femoral patients on postoperative day 1 [24.5 (21.7) vs. 11.9 (14.6) meters, respectively; p = 0.030] and day 2 [44.9 (26.3) vs. 22.0 (22.2) meters, respectively; p = 0.003]. Postoperative opioid consumption and length of stay were similar between groups. We conclude that adductor canal catheters offer both patient and provider benefits when compared to femoral nerve catheters. PMID:25217117

  7. The Jaw Adductor Muscle Complex in Teleostean Fishes: Evolution, Homologies and Revised Nomenclature (Osteichthyes: Actinopterygii)

    PubMed Central

    Datovo, Aléssio; Vari, Richard P.

    2013-01-01

    The infraclass Teleostei is a highly diversified group of bony fishes that encompasses 96% of all species of living fishes and almost half of extant vertebrates. Evolution of various morphological complexes in teleosts, particularly those involving soft anatomy, remains poorly understood. Notable among these problematic complexes is the adductor mandibulae, the muscle that provides the primary force for jaw adduction and mouth closure and whose architecture varies from a simple arrangement of two segments to an intricate complex of up to ten discrete subdivisions. The present study analyzed multiple morphological attributes of the adductor mandibulae in representatives of 53 of the 55 extant teleostean orders, as well as significant information from the literature in order to elucidate the homologies of the main subdivisions of this muscle. The traditional alphanumeric terminology applied to the four main divisions of the adductor mandibulae – A1, A2, A3, and Aω – patently fails to reflect homologous components of that muscle across the expanse of the Teleostei. Some features traditionally used as landmarks for identification of some divisions of the adductor mandibulae proved highly variable across the Teleostei; notably the insertion on the maxilla and the position of muscle components relative to the path of the ramus mandibularis trigeminus nerve. The evolutionary model of gain and loss of sections of the adductor mandibulae most commonly adopted under the alphanumeric system additionally proved ontogenetically incongruent and less parsimonious than a model of subdivision and coalescence of facial muscle sections. Results of the analysis demonstrate the impossibility of adapting the alphanumeric terminology so as to reflect homologous entities across the spectrum of teleosts. A new nomenclatural scheme is proposed in order to achieve congruence between homology and nomenclature of the adductor mandibulae components across the entire Teleostei. PMID

  8. The prevalence of absence of the palmaris longus muscle in the Bahraini population.

    PubMed

    Sater, Mai S; Dharap, Amol S; Abu-Hijleh, Marwan F

    2010-11-01

    Absence of the palmaris longus muscle has been well documented in several populations at a prevalence rate ranging between 2.2 and 63.9% which varies according to race, sex, and side of the body. There is little documentation of the prevalence of absence of this muscle from populations in the Arabian Gulf region. We examined 1,043 subjects, 3-85 years old, from the Kingdom of Bahrain for the presence or absence of the palmaris longus muscle using the conventional test for the presence of this muscle. Statistical analyses investigated the association of muscle absence with sex, hand dominance, and laterality. The palmaris longus muscle was absent in 36.8% of subjects. Bilateral absence (19%) was more common than unilateral absence (17.9%) with preponderance in female subjects. The muscle was absent more often on the left side than the right (P = 0.003). In the right upper limbs the muscle was absent in female subjects more than male subjects (P = 0.031). This study reaffirms that there is population variation in the frequency of absence of the palmaris longus muscle. The tendon of the palmaris longus bifurcated at the wrist in 7.1% of subjects, with male subjects showing this feature more frequently than female subjects in the right hand (P = 0.037) and the left hand (P = 0.030). This has not been reported before. The clinical significance of our findings is discussed.

  9. Adductor pollicis jamming injuries in the professional baseball player: 2 case reports.

    PubMed

    Altobelli, Grant G; Ruchelsman, David E; Belsky, Mark R; Graham, Thomas; Asnis, Peter; Leibman, Matthew I

    2013-06-01

    We characterize a mechanism of injury, injury pattern, and treatment algorithm for adductor pollicis myotendinous injuries in 2 professional baseball players. Similar to myotendinous eccentric injuries in other anatomical areas, the adductor pollicis sustains a sudden forceful eccentric load during a jammed swing, resulting in intramuscular strain or tendon rupture. Based on the reported injury mechanism, and magnetic resonance imaging features of these myotendinous injuries, the thumb of the top hand during a jammed swing was suddenly and forcefully eccentrically abducted from a contracted and adducted position, resulting in injury patterns. PMID:23707017

  10. Adductor pollicis jamming injuries in the professional baseball player: 2 case reports.

    PubMed

    Altobelli, Grant G; Ruchelsman, David E; Belsky, Mark R; Graham, Thomas; Asnis, Peter; Leibman, Matthew I

    2013-06-01

    We characterize a mechanism of injury, injury pattern, and treatment algorithm for adductor pollicis myotendinous injuries in 2 professional baseball players. Similar to myotendinous eccentric injuries in other anatomical areas, the adductor pollicis sustains a sudden forceful eccentric load during a jammed swing, resulting in intramuscular strain or tendon rupture. Based on the reported injury mechanism, and magnetic resonance imaging features of these myotendinous injuries, the thumb of the top hand during a jammed swing was suddenly and forcefully eccentrically abducted from a contracted and adducted position, resulting in injury patterns.

  11. Endoscopic Loose Body Removal From Zone 2 Flexor Hallucis Longus Tendon Sheath.

    PubMed

    Lui, Tun Hing

    2016-06-01

    Tenosynovial chondromatosis can occur in the flexor hallucis longus tendon sheath. Complete synovectomy and removal of the loose bodies comprise the treatment of choice. An open procedure requires extensive soft-tissue dissection because the flexor hallucis longus tendon is a deep structure except at the hallux. A tendoscopy approach to synovectomy and removal of loose bodies has the advantage of minimally invasive surgery. This technical note outlines pearls and pitfalls and provides a step-by-step guide to performing this procedure. PMID:27656363

  12. Acute Compartment Syndrome after Non-Contact Peroneus Longus Muscle Rupture.

    PubMed

    Merriman, Jarrad; Villacis, Diego; Kephart, Curtis; Yi, Anthony; Romano, Russ; Hatch, George F Rick

    2015-12-01

    This case demonstrates a rare variation in the pattern of injury and the presentation of acute lateral compartment syndrome of the leg. Although uncommon, lateral compartment syndrome of the leg after an ankle inversion leading to peroneus longus muscle rupture has been previously documented. This case was unusual because there was no overt ankle injury and the patient was able to continue physical activity, in spite of a significant rupture of the peroneus longus muscle that was determined later. This case highlights the necessary vigilance clinicians must maintain when assessing non-contact injuries in patients with possible compartment syndrome.

  13. Regional differences in elements of human peroneus longus tendons.

    PubMed

    Matsumoto, Norikazu; Kumai, Tsukasa; Isomoto, Shinji; Shinohara, Yasushi; Tanaka, Yasuhito; Azuma, Cho; Minami, Takeshi; Tohno, Yoshiyuki

    2013-08-01

    Many studies have been performed on the structure, molecular composition, and biochemical properties of tendons. However, comparatively little research has been conducted on the content of various trace elements within tendons. Six elements were analyzed in four regions of the peroneus longus tendon: the tensional part of the tendon immediately proximal to the lateral malleolus (region A), the compressive region of the tendon in contact with the lateral malleolus (region B), the compressive region of the tendon in contact with the deep surface of the cuboid (region C), and the tensional part of the tendon between the cuboid and first metatarsal, to which the tendon is attached (region D). Regions B and C are wraparound regions. The calcium content was higher in region C (2.10 ± 0.93 mg/g) than in both regions A (1.25 ± 0.51 mg/g) and D (1.43 ± 0.41 mg/g) (p < 0.05), indicating that it is likely related to regional differences in cartilage degeneration. The phosphorus content was also higher in region C, possibly because of low alkaline phosphatase activity in this region. The sulfur content was higher in the wraparound regions (region B: 0.98 ± 0.09 mg/g, region C: 1.24 ± 0.19 mg/g) than in both regions A (0.83 ± 0.11 mg/g) and D (0.83 ± 0.1 mg/g) (p < 0.01); sulfur content is thought to be influenced by tendon-bone compression. Finally, the magnesium content in the wraparound regions was also higher, which is probably related to a higher level of fibrocartilage. No significant relationships were found with regard to zinc or iron. Overall, the findings of the present study indicate that element contents are related to function and anatomical differences in tendons, and that they may even vary within the same tendon.

  14. Acoustic Variations in Adductor Spasmodic Dysphonia as a Function of Speech Task.

    ERIC Educational Resources Information Center

    Sapienza, Christine M.; Walton, Suzanne; Murry, Thomas

    1999-01-01

    Acoustic phonatory events were identified in 14 women diagnosed with adductor spasmodic dysphonia (ADSD), a focal laryngeal dystonia that disturbs phonatory function, and compared with those of 14 age-matched women with no vocal dysfunction. Findings indicated ADSD subjects produced more aberrant acoustic events than controls during tasks of…

  15. Extraction and Identification of the Pigment in the Adductor Muscle Scar of Pacific Oyster Crassostrea gigas

    PubMed Central

    Wei, Lei; Li, Jian; Li, Zhonghu; Wang, Xiaotong

    2015-01-01

    In this study, UV (ultraviolet) and IR (infrared radiation) spectral analysis were integrated to identify the pigment in the adductor muscle scar of the Pacific oyster Crassostrea gigas. The pigment was extracted from the adductor muscle scars of cleaned oyster shells that were pulverized, hydrolyzed in hot hydrochloric acid, purified with diethyl ether, and dissolved in 0.01 mL/L NaOH. The maximum absorption of the pigment in the UV absorption spectrum within the range of 190–500 nm was observed between 210–220 nm. The UV absorbance decreased with increasing wavelength which was consistent with the UV spectral absorption characteristics of melanin. In addition, Fourier transform infrared spectroscopy scanning revealed characteristic absorption peaks that emerged near 3440 cm-1 and 1630 cm-1, which was consistent with infrared scanning features of eumelanin (a type of melanin). This study has demonstrated for the first time that the pigment in the adductor muscle scar of the Pacific oyster is melanin, hinting that the adductor muscle could be another organ pigmenting the mollusc shell with melanin other than mantle. PMID:26555720

  16. Attritional rupture of the extensor pollicis longus tendon by an osseous spur more than 30 years after wrist injury: a case report.

    PubMed

    Kuriyama, Kohji; Murase, Tsuyoshi; Moritomo, Hisao; Yoshikawa, Hideki

    2014-12-01

    A 46-year-old woman sustained a rupture of the extensor pollicis longus tendon more than 30 years after wrist injury. She was successfully treated with palmaris longus tendon graft and excision of the osseous spur. Attrition of the extensor pollicis longus tendon by a newly formed osseous spur was the major mechanism.

  17. Effects of ankle extensor muscle afferent inputs on hip abductor and adductor activity in the decerebrate walking cat.

    PubMed

    Bolton, D A E; Misiaszek, J E

    2012-12-01

    Electrical stimulation of the lateral gastrocnemius-soleus (LGS) nerve at group I afferent strength leads to adaptations in the amplitude and timing of extensor muscle activity during walking in the decerebrate cat. Such afferent feedback in the stance leg might result from a delay in stance onset of the opposite leg. Concomitant adaptations in hip abductor and adductor activity would then be expected to maintain lateral stability and balance until the opposite leg is able to support the body. As many hip abductors and adductors are also hip extensors, we hypothesized that stimulation of the LGS nerve at group I afferent strength would produce increased activation and prolonged burst duration in hip abductor and adductor muscles in the premammillary decerebrate walking cat. LGS nerve stimulation during the extensor phase of the locomotor cycle consistently increased burst amplitude of the gluteus medius and adductor femoris muscles, but not pectineus or gracilis. In addition, LGS stimulation prolonged the burst duration of both gluteus medius and adductor femoris. Unexpectedly, long-duration LGS stimulus trains resulted in two distinct outcomes on the hip abductor and adductor bursting pattern: 1) a change of burst duration and timing similar to medial gastrocnemius; or 2) to continue rhythmically bursting uninterrupted. These results indicate that activation of muscle afferents from ankle extensors contributes to the regulation of activity of some hip abductor and adductor muscles, but not all. These results have implications for understanding the neural control of stability during locomotion, as well as the organization of spinal locomotor networks. PMID:22972967

  18. Botulinum toxin type A in the treatment of painful adductor muscle contracture after total hip arthroplasty.

    PubMed

    Santamato, Andrea; Ranieri, Maurizio; Panza, Francesco; Solfrizzi, Vincenzo; Frisardi, Vincenza; Lapenna, Luisa Maria; Moretti, Biagio; Fiore, Pietro

    2009-10-01

    Painful adductor muscle contracture is an important cause of failure during rehabilitation following total hip arthroplasty (THA). Adductor muscle contracture may be caused by postoperative muscle retractions, adhesive capsulitis, postoperative leg-length inequalities caused by implant failure, or preexisting hip pathologies. A 34-year-old woman experienced a persistent painful contracture into the left adductor magnus muscle after THA. She had no leg-length inequalities and, according to the Medical Research Council scale (grades 0-5), muscle strength of the quadriceps was 5/5 for the right side and 3/5 for the left. The degree of functionality according to the Harris hip score (HHS) was 16/100 in the left hip. The pain level, measured with the visual analog scale (VAS), was 7/10. The patient was unable to fully adhere to the rehabilitation program and walked with a limp during the stance phase of gait. After 7 days of treatment with injections of botulinum toxin type A into the left adductor magnus muscle (dose, 150 UM) and subsequent rehabilitation, a great reduction of painful contracture was observed (VAS score, 2/10). The procedure was well tolerated and no adverse effects were noted. After 20 days, hip articular range of motion and gait had improved (HHS score, 75/100). The clinical effects of botulinum toxin type A were present at 2-month follow-up. This treatment may be a viable alternative for the management of painful adductor muscle contracture after THA, without significant side effects. PMID:19824593

  19. Saphenous and Infrapatellar Nerves at the Adductor Canal: Anatomy and Implications in Regional Anesthesia.

    PubMed

    Anagnostopoulou, Sofia; Anagnostis, George; Saranteas, Theodosios; Mavrogenis, Andreas F; Paraskeuopoulos, Tilemachos

    2016-01-01

    Conflicting data exist regarding the anatomical relationship of the saphenous and infrapatellar nerves at the adductor canal and the location of the superior foramen of the canal. Therefore, the authors performed a cadaveric study to detail the relationship and course of the saphenous and infrapatellar nerves and the level of the superior foramen of the canal. The adductor canal and subsartorial compartment were dissected in 17 human cadavers. The distance between the superior foramen of the canal and the mid-distance (MD) between the base of the patella and the anterior superior iliac crest were measured; the course of the saphenous and infrapatellar nerves and the level of origin of the infrapatellar branch were detailed. In 13 of 17 specimens, the superior foramen of the adductor canal was distal to the MD (mean, 6.5 cm); in the remaining specimens, it was proximal to the MD. In 12 of 17 specimens, the infrapatellar branch exited the canal separately from the saphenous nerve; in the remaining specimens, it originated caudally to the canal. In all dissections, the infrapatellar branch had a constant course in close proximity to the saphenous nerve within the canal and between the sartorious muscle and femoral artery caudally to the canal. Most commonly, the superior foramen of the adductor canal is located caudally to the MD; the infrapatellar branch originates from the saphenous nerve within the canal and has a constant course in close proximity to the saphenous nerve. These observations should be considered for regional anesthesia techniques at the adductor canal.

  20. Relationship between adductor pollicis muscle thickness and subjective global assessment in a cardiac intensive care unit

    PubMed Central

    Karst, Fernanda Pickrodt; Vieira, Renata Monteiro; Barbiero, Sandra

    2015-01-01

    Objective To verify the relationship between the adductor pollicis muscle thickness test and the subjective global assessment and to correlate it with other anthropometric methods. Methods This observational cross-sectional study was conducted in the intensive care unit of a cardiology hospital in the state of Rio Grande do Sul, Brazil. The hospitalized patients underwent subjective global assessment and adductor pollicis muscle thickness tests on both hands, along with measurement of the right calf circumference. Laboratory parameters, length of stay, vital signs and electronic medical record data and tests were all collected. Results The study population included 83 patients, of whom 62% were men. The average age was 68.6 ± 12.5 years. The most common reason for hospitalization was acute myocardial infarction (34.9%), and the most common pathology was systolic blood pressure (63.9%), followed by diabetes mellitus (28.9%). According to subjective global assessment classifications, 62.7% of patients presented no nutritional risk, 20.5% were moderately malnourished and 16.9% were severely malnourished. Women had a higher nutritional risk, according to both the subjective global assessment and the adductor pollicis muscle thickness test, the cutoff for which was < 6.5mm (54.8%; p = 0.001). The pathology presenting the greatest nutritional risk was congestive heart failure (p = 0.001). Evaluation of the receiver operating characteristic (ROC) curve between adductor pollicis muscle thickness and subjective global assessment showed the accuracy of the former, with an area of 0.822. Conclusion Adductor pollicis muscle thickness proved to be a good method for evaluating nutritional risk. PMID:26761475

  1. Morphometric and Statistical Analysis of the Palmaris Longus Muscle in Human and Non-Human Primates

    PubMed Central

    Aversi-Ferreira, Roqueline A. G. M. F.; Bretas, Rafael Vieira; Maior, Rafael Souto; Davaasuren, Munkhzul; Paraguassú-Chaves, Carlos Alberto; Nishijo, Hisao; Aversi-Ferreira, Tales Alexandre

    2014-01-01

    The palmaris longus is considered a phylogenetic degenerate metacarpophalangeal joint flexor muscle in humans, a small vestigial forearm muscle; it is the most variable muscle in humans, showing variation in position, duplication, slips and could be reverted. It is frequently studied in papers about human anatomical variations in cadavers and in vivo, its variation has importance in medical clinic, surgery, radiological analysis, in studies about high-performance athletes, in genetics and anthropologic studies. Most studies about palmaris longus in humans are associated to frequency or case studies, but comparative anatomy in primates and comparative morphometry were not found in scientific literature. Comparative anatomy associated to morphometry of palmaris longus could explain the degeneration observed in this muscle in two of three of the great apes. Hypothetically, the comparison of the relative length of tendons and belly could indicate the pathway of the degeneration of this muscle, that is, the degeneration could be associated to increased tendon length and decreased belly from more primitive primates to those most derivate, that is, great apes to modern humans. In conclusion, in primates, the tendon of the palmaris longus increase from Lemuriformes to modern humans, that is, from arboreal to terrestrial primates and the muscle became weaker and tending to be missing. PMID:24860810

  2. De Quervain disease caused by abductor pollicis longus tenosynovitis: a report of three cases.

    PubMed

    Maruyama, Masahiro; Takahara, Masatoshi; Kikuchi, Noriaki; Ito, Kazuo; Watanabe, Tadayoshi; Ogino, Toshihiko

    2009-01-01

    De Quervain disease is caused by a stenosing tenosynovitis in the first dorsal compartment, and the main aetiology is extensor pollicis brevis (EPB) tenosynovitis. We encountered three cases in which EPB tenosynovitis was absent and abductor pollicis longus (APL) tenosynovitis was confirmed during operation. In the treatment of de Quervain disease, APL tenosynovitis should be paid as much attention as EPB tenosynovitis. PMID:19598322

  3. Flexor Digitorum Longus Tendon Transfer and Modified Kidner Technique in Posterior Tibial Tendon Dysfunction.

    PubMed

    Maskill, James T; Pomeroy, Gregory C

    2016-01-01

    The modified Kidner procedure and flexor digitorum longus tendon transfer are common procedures used today when addressing posterior tibial tendon dysfunction. These techniques are often used in conjunction with a combination of osteotomies to correct flatfoot deformity, and have been proved to be reliable and predictable. PMID:26590720

  4. Chondroma within the flexor hallucis longus tendon sheath. A case report and literature review.

    PubMed

    Brahms, M A; Fumich, R M

    1978-01-01

    Chondromas in tendon sheaths are a rare entity proviously reported in the flexor sheaths on the hand and possibly the foot. This is the first reported case of condroma of the flexor hallucis longus tendon sheath at the ankle region. A literature review with regard to pathogenesis, classification, and recurrence has been presented.

  5. Insertional tendinopathy of the adductors and rectus abdominis in athletes: a review.

    PubMed

    Valent, Alessandro; Frizziero, Antonio; Bressan, Stefano; Zanella, Elena; Giannotti, Erika; Masiero, Stefano

    2012-04-01

    Insertional tendinopathy of the adductors and rectus abdominis is common in male athletes, especially in soccer players. It may be worsened by physical activity and it usually limits sport performance. The management goal in the acute phase consists of analgesic and anti-inflammatory drugs and physical rehabilitation. In the early stages of rehabilitation, strengthening exercises of adductors and abdominal muscles, such as postural exercises, have been suggested. In the sub-acute phase, muscular strength is targeted by overload training in the gym or aquatherapy; core stability exercises seem to be useful in this phase. Finally, specific sport actions are introduced by increasingly complex exercises along with a preventive program to limit pain recurrences. PMID:23738289

  6. Insertional tendinopathy of the adductors and rectus abdominis in athletes: a review

    PubMed Central

    Valent, Alessandro; Frizziero, Antonio; Bressan, Stefano; Zanella, Elena; Giannotti, Erika; Masiero, Stefano

    2012-01-01

    Summary Insertional tendinopathy of the adductors and rectus abdominis is common in male athletes, especially in soccer players. It may be worsened by physical activity and it usually limits sport performance. The management goal in the acute phase consists of analgesic and anti-inflammatory drugs and physical rehabilitation. In the early stages of rehabilitation, strengthening exercises of adductors and abdominal muscles, such as postural exercises, have been suggested. In the sub-acute phase, muscular strength is targeted by overload training in the gym or aquatherapy; core stability exercises seem to be useful in this phase. Finally, specific sport actions are introduced by increasingly complex exercises along with a preventive program to limit pain recurrences. PMID:23738289

  7. Isokinetic Testing of the Shoulder Abductors and Adductors: Windowed vs Nonwindowed Data Collection.

    PubMed

    Wilk, K E; Arrigo, C A; Andrews, J R

    1992-01-01

    Presented at the Sports Physical Therapy Section Team Concept Meeting, December 1991, New Orleans, LA The manner of acquiring strength-testing data may influence the results of an investigation. The purpose of this study was to determine if a significant difference exists between windowed and unwindowed data collection during isokinetic testing of the shoulder abductors/adductors. Fifty healthy professional baseball pitchers participated in this study. Testing was performed on a Biodex isokinetic dynamometer at 180 and 300 degrees /sec for both the throwing and nonthrowing shoulders. Testing procedures regarding testing protocol, repetitions, positioning, and stabilization followed established guidelines for each subject. Statistical analysis was performed using a paired t-test with a p < 0.01 level of significance. Statistically significant differences were demonstrated between windowed and unwindowed mean peak torque data for both shoulders at both test speeds. The results indicated an average nonthrowing arm difference of 20.2 ft/lbs at 180 degrees /sec and 51.7 ft/lbs at 300 degrees / sec for the abductors. In each instance, the unwindowed mean peak torque values were higher than the windowed values, and significant end range torque spikes were elicited during unwindowed data collection. The nonthrowing adductors exhibited an average of 39.3 and 48.3 ft/lb differences at 180 and 300 degrees /sec, respectively. The throwing shoulder demonstrated average abductor differences of 25.6 ft/lbs at 180 degrees /sec and 47.7 ft/lbs at 300 degrees /sec. The average throwing adductor difference was 24.4 ft/lbs and 54.6 ft/lbs, respectively, at both test speeds. This investigation offers clinical relevance for those using isokinetic testing of the shoulder abductors/adductors in demonstrating the significant differences between windowed and unwindowed data, identifying torque spike data misinterpretation, and describing a clinical means of controlling aberrant torque

  8. Laryngeal Adductor Function in Experimental Models of Recurrent Laryngeal Nerve Injury

    PubMed Central

    Paniello, Randal C.; Rich, Jason T.; Debnath, Nick L.

    2014-01-01

    Objectives/Hypothesis Most patients with unilateral vocal fold paralysis experience some degree of spontaneous reinnervation, which depends upon the type and severity of recurrent laryngeal nerve (RLN) injury. After partial recovery, the paretic vocal fold may or may not adduct adequately to allow glottic closure, which in turn affects phonatory and swallowing outcomes. This process was studied in a series of canine laryngeal nerve injury models. Study Design Animal (canine) experiments. Methods Maximum stimulable laryngeal adductor pressure (LAP) was measured pre-treatment (baseline) and at 6 months following experimental RLN injuries (total n=59). The 9 study groups were designed to simulate a range of severities of RLN injury. Results The greatest LAP recovery, at 108% of original baseline, was seen in a 50% transection model; the least recovery was seen when the RLN underwent complete transection with repair, at 56% with precise alignment and 50% with alignment reversed. Intermediate models (partial RLN injuries) gave intermediate results. Crush models recovered 105% of LAP, while a half-transection, half-crush injury recovered 72% and cautery injuries recovered 61%. Controls (complete transection without repair) had no measurable recovery. Conclusions The injured RLN has a strong tendency to recover. Restoration of adductor strength, as determined by the LAP, was predictably related to the severity of RLN injury. The model RLN injuries studied provide a range of expected outcomes that can be used for future experiments exploring interventions that may improve post-injury adductor function. PMID:25283381

  9. Eccentric and Isometric Hip Adduction Strength in Male Soccer Players With and Without Adductor-Related Groin Pain

    PubMed Central

    Thorborg, Kristian; Branci, Sonia; Nielsen, Martin Peter; Tang, Lars; Nielsen, Michael Bachmann; Hölmich, Per

    2014-01-01

    Background: Adductor-related pain is the most common clinical finding in soccer players with groin pain and can be a long-standing problem affecting physical function and performance. Hip adductor weakness has been suggested to be associated with this clinical entity, although it has never been investigated. Purpose: To investigate whether isometric and eccentric hip strength are decreased in soccer players with adductor-related groin pain compared with asymptomatic soccer controls. The hypothesis was that players with adductor-related groin pain would have lower isometric and eccentric hip adduction strength than players without adductor-related groin pain. Study Design: Cross-sectional study; Level of evidence, 3. Methods: Male elite and subelite players from 40 teams were contacted. In total, 28 soccer players with adductor-related groin pain and 16 soccer players without adductor-related groin pain (asymptomatic controls) were included in the study. In primary analysis, the dominant legs of 21 soccer players with adductor-related groin pain (≥4 weeks duration) were compared with the dominant legs of 16 asymptomatic controls using a cross-sectional design. The mean age of the symptomatic players was 24.5 ± 2.5 years, and the mean age of the asymptomatic controls was 22.9 ± 2.4 years. Isometric hip strength (adduction, abduction, and flexion) and eccentric hip strength (adduction) were assessed with a handheld dynamometer using reliable test procedures and a blinded assessor. Results: Eccentric hip adduction strength was lower in soccer players with adductor-related groin pain in the dominant leg (n = 21) compared with asymptomatic controls (n = 16), namely 2.47 ± 0.49 versus 3.12 ± 0.43 N·m/kg, respectively (P < .001). No other hip strength differences were observed between symptomatic players and asymptomatic controls for the dominant leg (P = .35-.84). Conclusion: Large eccentric hip adduction strength deficits were found in soccer players with adductor

  10. Myofascial force transmission between transferred rat flexor carpi ulnaris muscle and former synergistic palmaris longus muscle

    PubMed Central

    Maas, Huub; Huijing, Peter A.

    2011-01-01

    Summary We investigated the extent of mechanical interaction between rat flexor carpi ulnaris (FCU) and palmaris longus (PL) muscles following transfer of FCU to the distal tendons of extensor carpi radialis brevis and longus (ECRB/L) muscles. Five weeks after recovery from surgery, isometric forces exerted at the distal tendons of FCU and PL were quantified at various FCU lengths. PL was kept at a constant length. Changing the muscle-tendon complex length of transferred FCU (by maximally 3.5 mm) decreased PL force significantly (by 7%). A linear relationship was found between changes in FCU muscle belly length, being a measure of muscle relative positions, and PL force. These results indicate that despite transfer of FCU muscle to the extensor side of the forearm, changing FCU length still affects force transmission of its, now, antagonistic PL muscle. We conclude that a transferred muscle may still be mechanically linked to its former synergistic muscles. PMID:23738260

  11. Histochemical and morphometric characteristics of the normal human vastus medialis longus and vastus medialis obliquus muscles.

    PubMed Central

    Travnik, L; Pernus, F; Erzen, I

    1995-01-01

    The histochemical and morphometric characteristics of the vastus medialis longus and vastus medialis obliquus muscles were studied and compared with data on vastus lateralis. Cross-sections of autopsied muscles from 9 healthy men, aged 18-44 y, who had died suddenly were analysed. Data were obtained on proportions, cross-sectional diameter, and on atrophy and hypertrophy factors, of type 1, 2a, 2b, and 2c fibres. The analysis showed that the anatomical differences and the different functional demands placed on vastus medialis longus and vastus medialis obliquus are also expressed in different proportions and sizes of fibre types in the two muscles. The proportion of type 1 fibres was significantly higher (P < 0.01), and the proportion of 2b fibres was significantly lower (P < 0.01) in vastus medialis longus than in vastus medialis obliquus. The diameters of type 1 and type 2a fibres were significantly smaller (P < 0.01) in vastus medialis longus than in vastus medialis obliquus, although the differences were small. Within muscles a nonrandom arrangement of fibre types existed with the deeper portions of the muscles having more type 1 fibres than the more superficial portions. The histochemical and morphometric characteristics of vastus lateralis and vastus medialis obliquus show great similarity, reflecting the common function of both muscles which is taking part in transverse knee stability. Estimates of the limits of normality of the proportion, diameter, atrophy and hypertrophy factors of type 1, 2a, 2b, and 2c fibres might be useful in obtaining information on how different physiological and pathological conditions influence the proportion and size of different fibre types.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:7592003

  12. Rupture of Flexor Pollicis Longus Tendon: A Complication of Volar Locking Plating of the Distal Radius.

    PubMed

    Rajeev, Aysha Sethunathan; Sreverthana, Shanaka; Harrison, John

    2010-08-01

    We report an unusual case of complete rupture of the flexor pollicis longus tendon following volar locking plating for a distal radius fracture. We believe that the prominence of a distal locking screw head predisposed to the rupture of the tendon. We highlight that correctly attaching the distal locking screws to the plate is essential for obtaining the correct biomechanics of the device and preventing flexor tendon rupture.

  13. Morphological and confocal laser scanning microscopic investigations of the adductor muscle-shell interface in scallop.

    PubMed

    Zhao, Che; Ren, Luquan; Liu, Qingping; Liu, Taoran

    2015-09-01

    The challenge of joining dissimilar advanced materials has led researchers around the world to search for new and more efficient solutions. This way, we can highlight the muscle-shell attachment in mollusk, which possessed high strength and toughness. In order to make clear how this "bi-material interface" derives its superior mechanical properties, the morphological features of the adductor muscle scar in Patinopecten yessoensis was investigated by means of confocal laser scanning microscopy (CLSM). This scar area was found to consist of a myostracum with many evenly distributed pit structures and a fracture section with a parallel arranged prism-like structure. The measured values of the distribution density, diameter, and depth of those pit structures were 24 ± 4/49,152 μm2, 7.36 ± 2.47 μm, and 1 ± 0.31 μm respectively. Profile of each pit wall was arc curve without closed angle. Furthermore, CLSM micrographs showed that considerable micro pits (0.1-0.9 μm in diameter) distribute round the pit wall and on the pit bottom. This special micromorphology is the first report on the adductor muscle scar in scallop. In addition, the mineral state and mechanical property of the scar surface was analyzed by XRD and nanoindentation test respectively. In general, the study results presented in this work elucidated that the adductor muscle of P. yessoensis was attached to the shell by insertion of collagen fibers and fibril bundles branched from themselves into pits on the myostracum. This specific connection mechanism can increase the strength of the interface without compromising its ductility and toughness. PMID:26202606

  14. Myostatin dysfunction impairs force generation in extensor digitorum longus muscle and increases exercise-induced protein efflux from extensor digitorum longus and soleus muscles.

    PubMed

    Baltusnikas, Juozas; Kilikevicius, Audrius; Venckunas, Tomas; Fokin, Andrej; Bünger, Lutz; Lionikas, Arimantas; Ratkevicius, Aivaras

    2015-08-01

    Myostatin dysfunction promotes muscle hypertrophy, which can complicate assessment of muscle properties. We examined force generating capacity and creatine kinase (CK) efflux from skeletal muscles of young mice before they reach adult body and muscle size. Isolated soleus (SOL) and extensor digitorum longus (EDL) muscles of Berlin high (BEH) mice with dysfunctional myostatin, i.e., homozygous for inactivating myostatin mutation, and with a wild-type myostatin (BEH+/+) were studied. The muscles of BEH mice showed faster (P < 0.01) twitch and tetanus contraction times compared with BEH+/+ mice, but only EDL displayed lower (P < 0.05) specific force. SOL and EDL of age-matched but not younger BEH mice showed greater exercise-induced CK efflux compared with BEH+/+ mice. In summary, myostatin dysfunction leads to impairment in muscle force generating capacity in EDL and increases susceptibility of SOL and EDL to protein loss after exercise.

  15. Elbow joint adductor moment arm as an indicator of forelimb posture in extinct quadrupedal tetrapods.

    PubMed

    Fujiwara, Shin-ichi; Hutchinson, John R

    2012-07-01

    Forelimb posture has been a controversial aspect of reconstructing locomotor behaviour in extinct quadrupedal tetrapods. This is partly owing to the qualitative and subjective nature of typical methods, which focus on bony articulations that are often ambiguous and unvalidated postural indicators. Here we outline a new, quantitatively based forelimb posture index that is applicable to a majority of extant tetrapods. By determining the degree of elbow joint adduction/abduction mobility in several tetrapods, the carpal flexor muscles were determined to also play a role as elbow adductors. Such adduction may play a major role during the stance phase in sprawling postures. This role is different from those of upright/sagittal and sloth-like creeping postures, which, respectively, depend more on elbow extensors and flexors. Our measurements of elbow muscle moment arms in 318 extant tetrapod skeletons (Lissamphibia, Synapsida and Reptilia: 33 major clades and 263 genera) revealed that sprawling, sagittal and creeping tetrapods, respectively, emphasize elbow adductor, extensor and flexor muscles. Furthermore, scansorial and non-scansorial taxa, respectively, emphasize flexors and extensors. Thus, forelimb postures of extinct tetrapods can be qualitatively classified based on our quantitative index. Using this method, we find that Triceratops (Ceratopsidae), Anhanguera (Pterosauria) and desmostylian mammals are categorized as upright/sagittally locomoting taxa.

  16. Three dimensional digital reconstruction of the jaw adductor musculature of the extinct marsupial giant Diprotodon optatum

    PubMed Central

    2014-01-01

    The morphology and arrangement of the jaw adductor muscles in vertebrates reflects masticatory style and feeding processes, diet and ecology. However, gross muscle anatomy is rarely preserved in fossils and is, therefore, heavily dependent on reconstructions. An undeformed skull of the extinct marsupial, Diprotodon optatum, recovered from Pleistocene sediments at Bacchus Marsh in Victoria, represents the most complete and best preserved specimen of the species offering a unique opportunity to investigate functional anatomy. Computed tomography (CT) scans and digital reconstructions make it possible to visualise internal cranial anatomy and predict location and morphology of soft tissues, including muscles. This study resulted in a 3D digital reconstruction of the jaw adductor musculature of Diprotodon, revealing that the arrangement of muscles is similar to that of kangaroos and that the muscle actions were predominantly vertical. 3D digital muscle reconstructions provide considerable advantages over 2D reconstructions for the visualisation of the spatial arrangement of the individual muscles and the measurement of muscle properties (length, force vectors and volume). Such digital models can further be used to estimate muscle loads and attachment sites for biomechanical analyses. PMID:25165628

  17. Absolute reliability of shoulder joint horizontal adductor muscle strength measurements using a handheld dynamometer.

    PubMed

    Hirano, Masahiro; Katoh, Munenori

    2015-07-01

    [Purpose] The aim of this study was to verify the absolute reliability of shoulder joint horizontal adductor muscle strength measurements using a handheld dynamometer (HHD). [Subjects and Methods] The subjects were 33 healthy college students. The measurements were made three times with the HHD fixed using a belt (BFHHD) or with the examiner's hand (conventional method; HFHHD). The absolute reliability of measurements was verified using Bland-Altman analysis, both in the all subjects group and a group of subjects showing measurements less than a fixed limit of 30 kgf. [Results] In the <30 kgf group, a systematic bias was not observed, and BFHHD values were greater than HFHHD values. BFHHD values in the all subjects group showed a systematic bias; the 3rd measurement value was less than the maximum value obtained during the 1st and 2nd measurements. [Conclusion] For obtaining an acceptable value during clinical measurements of horizontal adductor muscle strength, single measurements obtained using an HFHHD in the case of a <30 kgf group and the maximum value of two measurements obtained using a BFHHD are reliable. PMID:26311938

  18. Vocal aging and adductor spasmodic dysphonia: Response to botulinum toxin injection

    PubMed Central

    Cannito, Michael P; Kahane, Joel C; Chorna, Lesya

    2008-01-01

    Aging of the larynx is characterized by involutional changes which alter its biomechanical and neural properties and create a biological environment that is different from younger counterparts. Illustrative anatomical examples are presented. This natural, non-disease process appears to set conditions which may influence the effectiveness of botulinum toxin injection and our expectations for its success. Adductor spasmodic dysphonia, a type of laryngeal dystonia, is typically treated using botulinum toxin injections of the vocal folds in order to suppress adductory muscle spasms which are disruptive to production of speech and voice. A few studies have suggested diminished response to treatment in older patients with adductor spasmodic dysphonia. This retrospective study provides a reanalysis of existing pre-to-post treatment data as function of age. Perceptual judgments of speech produced by 42 patients with ADSD were made by two panels of professional listeners with expertise in voice or fluency of speech. Results demonstrate a markedly reduced positive response to botulinum toxin treatment in the older patients. Perceptual findings are further elucidated by means of acoustic spectrography. Literature on vocal aging is reviewed to provide a specific set of biological mechanisms that best account for the observed interaction of botulinum toxin treatment with advancing age. PMID:18488884

  19. The Results of Adductor Magnus Tenodesis in Adolescents with Recurrent Patellar Dislocation

    PubMed Central

    Malecki, Krzysztof; Fabis, Jaroslaw; Flont, Pawel; Niedzielski, Kryspin Ryszard

    2015-01-01

    Recurrent dislocation of the patella is a common orthopaedic problem which occurs in about 44% of cases after first-time dislocation. In most cases of first-time patellar dislocation, the medial patellofemoral ligament (MPFL) becomes damaged. Between 2010 and 2012, 33 children and adolescents (39 knees) with recurrent patellar dislocation were treated with MPFL reconstruction using the adductor magnus tendon. The aim of our study is to assess the effectiveness of this surgical procedure. The outcomes were evaluated functionally (Lysholm knee scale, the Kujala Anterior Knee Pain Scale, and isokinetic examination) and radiographically (Caton index, sulcus angle, congruence angle, and patellofemoral angle). Four patients demonstrated redislocation with MPFL graft failure, despite the fact that patellar tracking was found to be normal before the injury, and the patients had not reported any symptoms. Statistically significant improvements in Lysholm and Kujala scales, in patellofemoral and congruence angle, were seen (P < 0.001). A statistically significant improvement in the peak torque of the quadriceps muscle and flexor was observed for 60°/sec and 180°/sec angular velocities (P = 0.01). Our results confirm the efficacy of MPFL reconstruction using the adductor magnus tendon in children and adolescents with recurrent patellar dislocation. PMID:25785271

  20. Comparison of Adductor Canal Block and Femoral Nerve Block for Postoperative Pain in Total Knee Arthroplasty

    PubMed Central

    Dong, Cui-Cui; Dong, Shu-Ling; He, Fu-Cheng

    2016-01-01

    Abstract A total knee arthroplasty (TKA) has always been associated with moderate-to-severe pain. A systematic review of randomized controlled trials (RCTs) and non-RCTs was performed to evaluate the efficacy and safety of pain control of adductor canal block (ACB) and femoral nerve block (FNB) after TKA. Relevant literatures about the ACB and FNB after TKA for reducing pain were searched from Medline (1996-January, 2015), Embase (1980-January, 2015), PubMed (1980-January, 2015), Web of Science (1980-January, 2015), and The Cochrane Central Register of Controlled Trials. High-quality RCTs and non-RCTs were picked to evaluate the visual analogue scale (VAS) and other outcome. This systematic review and meta-analysis were performed according to the PRISMA statement criteria. The software RevMan 5.30 was used for the meta-analysis. Eight literatures fitted into the inclusion criteria. There were no significant differences in VAS score with rest or mobilization at 4, 24, and 48 h between ACB group and FNB group. There were also no significant differences in the strength of quadriceps and adductor, the length of hospital stay, and complications of vomiting and nausea. Present meta-analysis indicated that ACB shows no superiority than FNB group. Both of them can reduce the pain score after TKA. As referred to which method to adopt, it is determined by the preference of the surgeons and anesthesiologists. PMID:27015172

  1. Late extensor pollicis longus rupture following plate fixation in Galeazzi fracture dislocation.

    PubMed

    Sabat, Dhananjaya; Dabas, Vineet; Dhal, Anil

    2014-07-01

    Late rupture of extensor pollicis longus (EPL) tendon after Galeazzi fracture dislocation fixation is an unknown entity though it is a well-established complication following distal radius fractures. We report the case of a 55-year old male who presented with late EPL tendon rupture 4 months following internal fixation of Galeazzi fracture dislocation with a Locking Compression Plate (LCP). He was managed with extensor indicis proprius (EIP) transfer to restore thumb extension. At 4 years followup, functional result of the transfer was good. We identify possible pitfalls with this particular patient and discuss how to avoid them in future.

  2. Entrapment of Extensor Pollicis Longus Tendon after Volar Plating of a Smith Type Pediatric Distal Forearm Fracture.

    PubMed

    Franz, Torsten

    2016-06-01

    Extensor pollicis longus tendon entrapment is a rare complication of volarly displaced pediatric distal radius fractures. The few pediatric case reports have described tendon entrapment associated with conservative fracture treatment, or have been recognized at subsequent revision surgery after failure to achieve closed fracture reduction. A case of extensor pollicis longus tendon entrapment after open reduction and volar plate fixation of a pediatric distal forearm fracture is reported. This complication may also occur secondarily after open reduction and volar plating of the distal radius. PMID:27454642

  3. Clinical prevalence of palmaris longus agenesis: a systematic review and meta-analysis.

    PubMed

    Yammine, Kaissar

    2013-09-01

    We report a systematic review and a proportion meta-analysis of prevalence studies evaluating the prevalence of palmaris longus agenesis (PLA) in the literature. The overall PLA rate was defined to be the primary outcome. Secondary outcomes were rates of PLA in relation to ethnicity, laterality, side, gender, age, and hand dominance. We identified 26 articles which met the inclusion criteria. Meta-analyses showed an overall PLA pooled rate of 20.25%, higher than the commonly reported overall rate of 15%. Our results also showed significantly lower pooled rates in Africans (11.3%) and East Asians (4.5%) when compared to Arab Middle Eastern population (41.7%). A subgroup analysis of the African group showed a pooled rate of 2.71%, the lowest, in the East and South East African population. The pooled rate was 26.3% among Caucasians, 26.16% among South and Southeast Asians and 34.13% among Turkish. In discordance with the literature, PLA was statistically more predominant on the right side. No significant differences in PLA rates were found for laterality, gender, the combination of gender and side or the combination of gender and laterality. The lowest rate of PLA found in East and South East African populations might be indicative of the subsequent phylogenetic degeneration of the palmaris longus muscle in modern humans after the "Out of Africa" migration.

  4. A Study on the Accessory Head of the Flexor Pollicis Longus Muscle (Gantzer’s Muscle)

    PubMed Central

    S.A., Gunnal; A.U., Siddiqui; S.R., Daimi; M.S., Farooqui; R.N., Wabale

    2013-01-01

    Introduction: The present study was planned to analyze the Accessory Head of the Flexor Pollicis Longus muscle’ (AHFPL) or Gantzer’s muscle and its incidence. It is an additional muscle in the forearm which might cause pressure symptoms to the underlying structures, especially to the anterior interosseus nerve. Materials and Methods: This study was performed on 180 upper limbs (90 right and 90 left). The morphology and the morphometry of AHFPL was done. In this investigation, we observed the various shapes, origins, insertions, nerve supplies and relations of the muscle. Observations and Results: The incidence of the accessory head of the flexor pollicis longus muscle was seen in 92 cases (51.11%). It was found bilaterally in 66 (71.73%) cases and unilaterally in 26 cases (28.26%), among which, in 16, it was seen on the right side and in 10 on the left side. With the increasing incidence of the Gantzer’s muscle, one can call it as an evolutionary muscle. Conclusion: The present study supplements the knowledge on the morphology of AHFPL muscle and its relationship with the anterior interosseus nerve. An increased incidence of this muscle may be the causative factor for the complete anterior interosseous nerve syndrome. PMID:23634387

  5. Hip adductor muscle strength is reduced preceding and during the onset of groin pain in elite junior Australian football players.

    PubMed

    Crow, Justin F; Pearce, Alan J; Veale, James P; VanderWesthuizen, Dan; Coburn, Paul T; Pizzari, Tania

    2010-03-01

    Groin pain is a condition with a high prevalence in young Australian football players. It is considered that early identification of this condition allows for optimal management. Eighty-six players from two elite under-age Australian football sides were screened weekly for hip adductor muscle strength, using a hand-held dynamometer and for the onset of groin pain. The maximum variation in the average hip adductor muscle strength values of the sample was a 2.6% decrease from baseline in week 7 of the study. Twelve players (14% of the sample studied) reported groin pain for two consecutive weeks and were considered to have an onset of groin injury. The mean hip adductor muscle strength of these players was decreased significantly from baseline by an average of 11.75+/-2.50% at the week of pain onset (F=264.76 (1,11), p<0.001), and 5.82+/-5.16% in the week preceding the onset of pain (F=14.03 (1,10), p=0.004). These results confirm that hip adductor muscle strength is decreased both preceding and during the onset of groin injury in elite under-age Australian footballers. PMID:19546030

  6. [Traumatic muscle and tendon ruptures of the lower extremities in sport: adductor muscles, M. rectus femoris and M. biceps femoris].

    PubMed

    Krüger-Franke, M

    2010-12-01

    Ruptures of the adductor muscles, the M. rectus femoris or the M. biceps femoris are sports injuries which need quick and reliable diagnostic management. Treatment of muscle injuries is mostly conservative; complete tendon ruptures or avulsion fractures of the tendons are treated operatively according to the dislocation and the functional loss.

  7. Evaluation of the thoraco-laryngeal reflex ('slap test') as an indicator of laryngeal adductor myopathy in the horse.

    PubMed

    Newton-Clarke, M J; Divers, T J; Valentine, B A

    1994-09-01

    A study was conducted over a 12 month period to assess the accuracy of the 'slap test' in the diagnosis of laryngeal adductor myopathy. The thoraco-laryngeal reflexes of 15 horses with no clinical signs of idiopathic laryngeal hemiplegia (ILH) were recorded using a video-endoscope. These 'slap test' responses were examined independently by 3 assessors. The horses were subsequently subjected to euthanasia and samples taken from the cricoarytenoideus lateralis (CAL) muscles for histopathological examination and assessment of denervation atrophy. Despite normal adductory responses, moderate to severe atrophy of the left CAL muscles was seen in 5 horses. The remaining horses had varying degrees of adductor myopathy, invariably worse in the left side of the larynx. The 'slap test' as performed in this study was therefore unable to differentiate between horses with moderate to severe muscle changes and those without, making it useless as a diagnostic test for adductor myopathy. The reason for the preservation in adductor function despite advanced histological atrophy of the muscle may lie in the degree of reinnervation found in the muscles.

  8. Robot-assisted removal of a lymphocyst causing severe neuralgic pain and adductor atrophy.

    PubMed

    Cazzaniga, Giorgio; Borgfeldt, Christer; Wallengren, Nils-Olof; Persson, Jan

    2011-12-01

    Following a robot-assisted radical hysterectomy and pelvic lymphadenectomy for early-stage cervical cancer, a 53-year-old woman was diagnosed with a 50-mm right-sided pelvic lymphocyst by the use of vaginal ultrasonography. She gradually developed intermittent increasingly severe neuralgic pain mimicking a meralgia paresthetica. A neurolysis was proposed by the neurosurgeons. Awaiting this intervention, a pelvic MRI revealed a partial atrophy of the ipsilateral adductor muscles and a probable entrapment of the obturator nerve by the lymphocyst as an alternative cause of the pain. Using a four-arm da Vinci-S-HD robot the lymphocyst, located deep in the right obturator fossa and surrounding the obturator nerve, was completely removed, sparing the partially atrophic obturator nerve. No bleeding occurred. The surgery time was 95 min. At 10 months' follow-up the patient was relieved of her pain with no signs of a new lymphocyst. PMID:27628122

  9. Historical approaches to the treatment of Adductor-Type Spasmodic Dysphonia (ADSD): review and tutorial.

    PubMed

    Pearson, Erin J; Sapienza, Christine M

    2003-01-01

    Adductor-type spasmodic dysphonia (ADSD) is a voice disorder of uncertain, though likely neurogenic origin. Symptoms of the disorder include mild to profound "strain and strangle" sensations during voiced speech tasks that, in the most severe form, are physically and psychologically debilitating. Over the years, treatment approaches have evolved from behavioral attempts at voice modification, to surgical and, most recently, pharmacological treatments involving partial and temporary paralysis of muscle fibers within the larynx following injection of botulinum toxin or Botox. The most current research hints at the potential benefits of a multi-faceted approach to symptom management, combining behavioral with pharmacological treatments. The following is intended as a review and tutorial of treatment approaches for ADSD. The tutorial is intended for practicing clinical professionals with an interest in the treatment of neurogenic disorders of voice and speech.

  10. Force depression following muscle shortening in sub-maximal voluntary contractions of human adductor pollicis.

    PubMed

    Rousanoglou, Elissavet N; Oskouei, Ali E; Herzog, Walter

    2007-01-01

    Mechanical properties of skeletal muscles are often studied for controlled, electrically induced, maximal, or supra-maximal contractions. However, many mechanical properties, such as the force-length relationship and force enhancement following active muscle stretching, are quite different for maximal and sub-maximal, or electrically induced and voluntary contractions. Force depression, the loss of force observed following active muscle shortening, has been observed and is well documented for electrically induced and maximal voluntary contractions. Since sub-maximal voluntary contractions are arguably the most important for everyday movement analysis and for biomechanical models of skeletal muscle function, it is important to study force depression properties under these conditions. Therefore, the purpose of this study was to examine force depression following sub-maximal, voluntary contractions. Sets of isometric reference and isometric-shortening-isometric test contractions at 30% of maximal voluntary effort were performed with the adductor pollicis muscle. All reference and test contractions were executed by controlling force or activation using a feedback system. Test contractions included adductor pollicis shortening over 10 degrees, 20 degrees, and 30 degrees of thumb adduction. Force depression was assessed by comparing the steady-state isometric forces (activation control) or average electromyograms (EMGs) (force control) following active muscle shortening with those obtained in the corresponding isometric reference contractions. Force was decreased by 20% and average EMG was increased by 18% in the shortening test contractions compared to the isometric reference contractions. Furthermore, force depression was increased with increasing shortening amplitudes, and the relative magnitudes of force depression were similar to those found in electrically stimulated and maximal contractions. We conclude from these results that force depression occurs in sub

  11. Impact of longus colli muscle massage on the strength and endurance of the deep neck flexor muscle of adults.

    PubMed

    Gong, Wontae

    2013-05-01

    [Purpose] The purpose of the present study was to examine the effects of longus colli muscle massage on the strength and endurance of the deep neck flexor muscle in adults. [Subjects] A total of 60 subjects were divided into an experimental group of 30 subjects and a control group of 30 subjects. [Methods] The experimental group received massage of the longus colli muscle, which is the deep neck flexor muscle, and the control group received superficial neck muscle massage. The strength and endurance of both the experimental group and the control group were measured before and after the intervention using a pressure biofeedback unit (PBU). [Results] After the experiment, the strength of DNF of the experimental group showed a statistically significant increase, and the endurance of DNF of the experimental group showed an increase in its average value. The independent sample t-test revealed no statistically significant differences in the groups. [Conclusion] Massage of the longus colli muscle, which is the deep neck flexor, was shown to improve its strength and endurance, which are measures of neck stabilization. Therefore, longus colli muscle massage can be performed for patients who cannot perform neck-stabilizing exercises or before performing other neck-stabilizing exercises.

  12. Catalase-positive microperoxisomes in rat soleus and extensor digitorum longus muscle fiber types

    NASA Technical Reports Server (NTRS)

    Riley, Danny A.; Bain, James L. W.; Ellis, Stanley

    1988-01-01

    The size, distribution, and content of catalase-reactive microperoxisomes were investigated cytochemically in three types of muscle fibers from the soleus and the extensor digitorum longus (EDL) of male rats. Muscle fibers were classified on the basis of the mitochondrial content and distribution, the Z-band widths, and the size and shape of myofibrils as the slow-twitch oxidative (SO), the fast-twitch oxidative glycolytic (FOG), and the fast-twitch glycolytic (FG) fibers. It was found that both the EDL and soleus SO fibers possessed the largest microperoxisomes. A comparison of microperoxisome number per muscle fiber area or the microperoxisome area per fiber area revealed following ranking, starting from the largest number and the area-ratio values: soleus SO, EDL SO, EDL FOG, and EDL FG.

  13. Salvage Flexor Hallucis Longus Transfer for a Failed Achilles Repair: Endoscopic Technique

    PubMed Central

    Gonçalves, Sérgio; Caetano, Rubén; Corte-Real, Nuno

    2015-01-01

    Flexor hallucis longus (FHL) transfer is a well-established treatment option in failed Achilles tendon (AT) repair and has been routinely performed as an open procedure. We detail the surgical steps needed to perform an arthroscopic transfer of the FHL for a chronic AT rupture. The FHL tendon is harvested as it enters in its tunnel beneath the sustentaculum tali; a tunnel is then drilled in the calcaneus as near to the AT footprint as possible. By use of a suture-passing device, the free end of the FHL is advanced to the plantar aspect of the foot. After adequate tension is applied to the construct, the tendon is fixed in place with an interference screw in an inside-out fashion. This minimally invasive approach is a safe and valid alternative to classic open procedures with the obvious advantages of preserving the soft-tissue envelope and using a biologically intact tendon. PMID:26697296

  14. Hypogravity-induced atrophy of rat soleus and extensor digitorum longus muscles

    NASA Technical Reports Server (NTRS)

    Riley, D. A.; Ellis, S.; Slocum, G. R.; Satyanarayana, T.; Bain, J. L.; Sedlak, F. R.

    1987-01-01

    Prolonged exposure of humans to hypogravity causes weakening of their skeletal muscles. This problem was studied in rats exposed to hypogravity for 7 days aboard Spacelab 3. Hindlimb muscles were harvested 12-16 hours postflight for histochemical, biochemical, and ultrastructural analyses. The majority of the soleus and extensor digitorum longus fibers exhibited simple cell shrinkage. However, approximately 1% of the fibers in flight soleus muscles appeared necrotic. Flight muscle fibers showed increased glycogen, lower subsarcolemmal staining for mitochondrial enzymes, and fewer subsarcolemmal mitochondria. During atrophy, myofibrils were eroded by multiple focal losses of myofilaments; lysosomal autophagy was not evident. Tripeptidylaminopeptidase and calcium-activated protease activities of flight soleus fibers were significantly increased, implying a role in myofibril breakdown. Simple fiber atrophy appears to account for muscle weakening during spaceflight, but fiber necrosis is also a contributing factor.

  15. Abductor pollicis longus "hammock" ligamentoplasty for treatment of first carpometacarpal arthritis.

    PubMed

    Mathoulin, C; Moreel, P; Costa, R; Wilson, S M

    2008-06-01

    The association of trapeziectomy with ligamentoplasty is a simple treatment for osteoarthritis at the base of the thumb. Here we present the long-term results of a technique that creates a "hammock" under the first metacarpal bone using the Abductor Pollicis Longus tendon. This paper reports the results of treatment by this operation of 60 thumbs in 50 patients, including 13 men and 37 women of average age 60 (46-75) years. Thirty thumbs presented with severe pain and 30 with moderate pain. At final follow-up, 47 thumbs (78%) had experienced dramatic relief of pain following the procedure, 12 (20%) thumbs still had mild pain and one (2%) thumb had severe pain. No patients needed revision.

  16. Structural characterization of CFA/III and Longus type IVb pili from enterotoxigenic Escherichia coli.

    PubMed

    Kolappan, Subramaniapillai; Roos, Justin; Yuen, Alex S W; Pierce, Owen M; Craig, Lisa

    2012-05-01

    The type IV pili are helical filaments found on many Gram-negative pathogenic bacteria, with multiple diverse roles in pathogenesis, including microcolony formation, adhesion, and twitching motility. Many pathogenic enterotoxigenic Escherichia coli (ETEC) isolates express one of two type IV pili belonging to the type IVb subclass: CFA/III or Longus. Here we show a direct correlation between CFA/III expression and ETEC aggregation, suggesting that these pili, like the Vibrio cholerae toxin-coregulated pili (TCP), mediate microcolony formation. We report a 1.26-Å resolution crystal structure of CofA, the major pilin subunit from CFA/III. CofA is very similar in structure to V. cholerae TcpA but possesses a 10-amino-acid insertion that replaces part of the α2-helix with an irregular loop containing a 3(10)-helix. Homology modeling suggests a very similar structure for the Longus LngA pilin. A model for the CFA/III pilus filament was generated using the TCP electron microscopy reconstruction as a template. The unique 3(10)-helix insert fits perfectly within the gap between CofA globular domains. This insert, together with differences in surface-exposed residues, produces a filament that is smoother and more negatively charged than TCP. To explore the specificity of the type IV pilus assembly apparatus, CofA was expressed heterologously in V. cholerae by replacing the tcpA gene with that of cofA within the tcp operon. Although CofA was synthesized and processed by V. cholerae, no CFA/III filaments were detected, suggesting that the components of the type IVb pilus assembly system are highly specific to their pilin substrates. PMID:22447901

  17. Comparative anatomy and significance of the sesamoid bone of the peroneus longus muscle (os peroneum).

    PubMed Central

    Le Minor, J M

    1987-01-01

    The os peroneum is found in only a few primate families and seems to be completely absent in the non-primate pentadactyl mammals, in the Prosimii and in the Platyrrhinii (New World monkeys). In the Cercopithecidae (Catarrhinii, Old World monkeys) and the Hylobatidae, the os peroneum is a coffee bean-shaped constant, large and regular bone. The lateral surface of the bone is convex in all directions and non-articular. The medial surface is covered with hyaline cartilage and articulates by means of a synovial joint with the corresponding facet of the cuboid bone. The histological structure and the mode of ossification of the os peroneum are identical to that of other short bones of the skeleton. The os peroneum of the Cercopithecidae and Hylobatidae is an example of a new skeletal element that has appeared in a tendon subject to unusual mechanical stress. In the case of the peroneus longus tendon the stress is due to repetitive friction because of the functional importance of this muscle in the adduction and pseudo-opposability of the hallux. This osseous element is genetically fixed and hereditarily transmitted. Its mode of appearance is analogous to that accepted for the origin of the patella. In the Pongidae, the os peroneum is absent or rare. In man, this bone is relatively infrequent (approx 20% of mature individuals) and its shape is most irregular. In this case, the os peroneum appears as a regressive form of the typical bone observed in the above families, which is in the process of disappearing. Besides fundamental genetical factors, this regression is probably in relation to the disappearance of the functional importance of the peroneus longus muscle to the loss of the hallux opposability. Thus the mechanical factors cannot be dissociated from the genetic and phylogenetic factors in explaining the appearance and the regression of the os peroneum. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 PMID:3654363

  18. Structural Characterization of CFA/III and Longus Type IVb Pili from Enterotoxigenic Escherichia coli

    PubMed Central

    Kolappan, Subramaniapillai; Roos, Justin; Yuen, Alex S. W.; Pierce, Owen M.

    2012-01-01

    The type IV pili are helical filaments found on many Gram-negative pathogenic bacteria, with multiple diverse roles in pathogenesis, including microcolony formation, adhesion, and twitching motility. Many pathogenic enterotoxigenic Escherichia coli (ETEC) isolates express one of two type IV pili belonging to the type IVb subclass: CFA/III or Longus. Here we show a direct correlation between CFA/III expression and ETEC aggregation, suggesting that these pili, like the Vibrio cholerae toxin-coregulated pili (TCP), mediate microcolony formation. We report a 1.26-Å resolution crystal structure of CofA, the major pilin subunit from CFA/III. CofA is very similar in structure to V. cholerae TcpA but possesses a 10-amino-acid insertion that replaces part of the α2-helix with an irregular loop containing a 310-helix. Homology modeling suggests a very similar structure for the Longus LngA pilin. A model for the CFA/III pilus filament was generated using the TCP electron microscopy reconstruction as a template. The unique 310-helix insert fits perfectly within the gap between CofA globular domains. This insert, together with differences in surface-exposed residues, produces a filament that is smoother and more negatively charged than TCP. To explore the specificity of the type IV pilus assembly apparatus, CofA was expressed heterologously in V. cholerae by replacing the tcpA gene with that of cofA within the tcp operon. Although CofA was synthesized and processed by V. cholerae, no CFA/III filaments were detected, suggesting that the components of the type IVb pilus assembly system are highly specific to their pilin substrates. PMID:22447901

  19. Gene expression analyses of essential catch factors in the smooth and striated adductor muscles of larval, juvenile and adult great scallop (Pecten maximus).

    PubMed

    Andersen, Øivind; Torgersen, Jacob S; Pagander, Helene H; Magnesen, Thorolf; Johnston, Ian A

    2009-01-01

    The scallop adductor muscle consists of striated fibres responsible for the fast closure of the shells, and smooth fibres able to maintain tension in a prolonged state of contraction called catch. Formation of the force-bearing catch linkages has been demonstrated to be initiated by dephosphorylation of the key catch-regulating factor twitchin by a calcineurin-like phosphatase, while the involvement of other thick filament proteins is uncertain. Here we report on the development of catchability of the adductor smooth muscle in the great scallop (Pecten maximus) by analysing the spatio-temporal gene expression patterns of the myosin regulatory light chain (MLCr), twitchin, myorod and calcineurin using whole mount in situ hybridization and real-time quantitative PCR. The MLCr signal was identified in the retractor and adductor muscles of the pediveliger larvae, and the juvenile and adult scallop displayed abundant mRNA levels of MLCr in the smooth and striated adductor muscles. Twitchin was mainly expressed in the smooth adductor muscle during metamorphosis, whereas the adult striated adductor muscle contained seven-folds higher twitchin mRNA levels compared to the smooth portion. Calcineurin expression predominated in the gonads and in the smooth adductor, and five-folds higher mRNA levels were measured in the smooth than in the striated fibres at the adult stage. In contrast to the other genes examined, the expression of myorod was confined to the smooth adductor muscle suggesting that myorod plays a permissive role in the molluscan catch muscles, which are first required at the vulnerable settlement stage as a component of the predator defence system.

  20. Peak torque, reaction time, and rate of torque development of hip abductors and adductors of older women.

    PubMed

    Morcelli, Mary Hellen; Rossi, Denise Martineli; Karuka, Aline Harumi; Crozara, Luciano Fernandes; Hallal, Camilla Zamfolini; Marques, Nise Ribeiro; Gonçalves, Mauro; Navega, Marcelo Tavella

    2016-01-01

    Impaired muscle function at the hip has been implicated to be a major factor related to falls in older adults. Therefore, the aim of this study was to analyze the rate of torque development (RTD), reaction time (RT), and peak torque (PT) of hip abductors and hip adductors in young women (YW), older women nonfallers (ONF), and older women fallers (OF). Eighteen YW and 44 older women divided among OF (n = 20) and ONF (n = 24) performed maximum isometric hip abductor and adduction contractions on a dynamometer. YW had 40% greater PT and 61.5% greater RTD for hip abductors than the ONF. Compared with OF, YW had 47.5% greater PT and 68% greater RTD. OF showed less RTD at 150 ms (31%) and 200 ms (34.5%) than ONF for hip abductors. PT of hip adductors was 52% greater in YW than in the two older groups, whereas RTD was 71% greater. OF showed less RTD than ONF for hip abductors according to standardized effect sizes. No RT differences were observed between the three groups. We conclude that older women (OF and ONF) have less strength and ability to develop force rapidly than YW for hip abductors and adductors. Low hip strength and slowed force development in ONF during hip abduction may increase fall risk in older women.

  1. Isolated Avulsion of Extensor Carpi Radialis Longus and Brachioradialis Origins: A Case Report and Surgical Repair Technique.

    PubMed

    Salazar, Dane; Hazel, Antony; Marra, Guido

    2015-10-01

    The mobile wad of the elbow provides a tremendous mechanical advantage with respect to elbow flexion and wrist extension. Injury to these structures causes significant upper extremity dysfunction. In this article, we report the case of a 31-year-old right hand-dominant man who sustained an isolated avulsion of the extensor carpi radialis longus and brachioradialis origins from the lateral epicondyle and lateral supracondylar ridge. We describe our diagnostic workup and present our surgical repair technique. The literature includes only 2 case reports of bony avulsion fracture of the origin of the brachioradialis and, up until now, no case reports of isolated avulsion of the extensor carpi radialis longus and brachioradialis origins. Given the biomechanics and anatomy of the dorsal mobile wad, we posit that our patient's injury occurred secondary to an overwhelming eccentric muscle contracture. The rarity of this injury led to a substantial delay in diagnosis. Because of the potential morbidity, surgical intervention is recommended.

  2. Endoscopic-Assisted Flexor Hallucis Longus Transfer: Harvest of the Tendon at Zone 2 or Zone 3.

    PubMed

    Lui, Tun Hing

    2015-12-01

    Flexor hallucis longus (FHL) tendon transfer is indicated for reconstruction of the Achilles tendon with a gap larger than 5 cm. The tendon can be harvested at zone 2 or zone 3 by minimally invasive techniques with the advantage of minimal soft-tissue dissection. The tendon can be harvested under the sustentaculum tali by zone 2 FHL tendoscopy. It is adequate for FHL transfer to the posterior calcaneal tubercle. If a double-thickness reconstruction of a huge gap of the Achilles tendon is indicated, the tendon can be harvested at the level of the hallux by means of a tendon stripper. However, the interconnection tendon of the master knot of Henry can be split together with the FHL or flexor digitorum longus tendon instead of being cut. Zone 2 FHL tendoscopy can be used to release the split tendon to complete the FHL harvest. PMID:27284516

  3. Coordination among thigh muscles including the vastus intermedius and adductor magnus at different cycling intensities.

    PubMed

    Saito, Akira; Watanabe, Kohei; Akima, Hiroshi

    2015-04-01

    Although many studies have been focused on muscle synergies in the lower limbs, synergies of the thigh muscles during cycling have not been investigated in detail. We examined synergies of the thigh muscles including the vastus intermedius (VI) and adductor magnus (AM) while cycling. Eight healthy men pedaled at 20%, 40%, 60%, 80% and 100% of maximal aerobic power output at a constant cadence of 60 rpm. Surface electromyography (EMG) recorded signals from the deep VI and the three superficial quadriceps femoris (QF) muscles, the two hamstrings and the AM. The root mean square of the EMG signal was averaged every 2° of crank rotation and normalized by the peak value for each muscle. We used factor analysis to assess normalized EMG recordings while cycling and to identify thigh muscle synergies. The VI, the superficial QF muscles and the AM dominated the first muscle synergy at all power output levels. The AM also formed a second synergy with the two hamstrings at all power output levels. These results suggest that the VI coordinates with the other QF and AM muscles, and that the AM coordinates with the QF and hamstring muscles while cycling.

  4. The adductor pollicis muscle: a poor predictor of clinical outcome in ICU patients.

    PubMed

    Leong Shu-Fen, Claudia; Ong, Venetia; Kowitlawakul, Yanika; Ling, Teh Ai; Mukhopadhyay, Amartya; Henry, Jeya

    2015-01-01

    No nutrition assessment tools specifically tailored for intensive care unit (ICU) patients have been developed and validated in Singapore. Studies conducted in Brazilian populations suggest that the thickness of the adductor pollicis muscle (TAPM) may be used to assess nutritional status and predict mortality of critically ill patients. The aim of this study was to determine if TAPM can be used as a predictive indicator of mortality in Singapore ICU patients. TAPM values were obtained using skinfold calipers in 229 patients admitted to the medical ICU. TAPM measured in both hands showed no significant correlation with either the primary outcome (28-day mortality) or secondary outcomes (hospital outcome and hospital length of stay). This study demonstrated that TAPM does not predict 28-day mortality and hospital outcome, and is not correlated to length of stay in Singapore ICU patients. More studies are necessary to validate the use of TAPM as an anthropometric indicator of ICU outcome in other regions of the world. PMID:26693744

  5. The colour of the adductor muscle as a predictor of pork quality in the loin.

    PubMed

    Warriss, P D; Brown, S N; Paściak, P

    2006-08-01

    The relation between measurements of colour made in the m. adductor (AD) at 45min or 20 h post mortem and the quality, assessed subjectively in terms of colour and waterholding capacity, of the m. longissimus (LD) in the loin was examined. The study used data from 100 pig carcasses exhibiting a wide range of meat quality from extreme PSE (pale, soft and exudative) to extreme DFD (dark, firm and dry). The subjective assessments were confirmed by objective measures of paleness (reflectance) and waterholding capacity (drip loss in storage) in the LD. Lightness (L(∗)) measured at 20h post mortem in the AD was the best potential predictor of loin muscle quality, explaining 59% of the variation in subjective and objective quality measures. Comparable measurements at 45min post mortem explained between 21% and 44% of the variation. The equation that described the relation between AD Lightness (L(∗)) and subjectively assessed LD quality was derived. This could be used to transpose the AD L(∗) values from a population of slaughtered pigs into nominal subjective scores for the LD, allowing the frequency of the five subjective quality groups (extremely DFD, slightly DFD, normal, slightly PSE, and extremely PSE) in the population of carcasses to be defined.

  6. Everyday listeners' impressions of speech produced by individuals with adductor spasmodic dysphonia.

    PubMed

    Nagle, Kathleen F; Eadie, Tanya L; Yorkston, Kathryn M

    2015-01-01

    Individuals with adductor spasmodic dysphonia (ADSD) have reported that unfamiliar communication partners appear to judge them as sneaky, nervous or not intelligent, apparently based on the quality of their speech; however, there is minimal research into the actual everyday perspective of listening to ADSD speech. The purpose of this study was to investigate the impressions of listeners hearing ADSD speech for the first time using a mixed-methods design. Everyday listeners were interviewed following sessions in which they made ratings of ADSD speech. A semi-structured interview approach was used and data were analyzed using thematic content analysis. Three major themes emerged: (1) everyday listeners make judgments about speakers with ADSD; (2) ADSD speech does not sound normal to everyday listeners; and (3) rating overall severity is difficult for everyday listeners. Participants described ADSD speech similarly to existing literature; however, some listeners inaccurately extrapolated speaker attributes based solely on speech samples. Listeners may draw erroneous conclusions about individuals with ADSD and these biases may affect the communicative success of these individuals. Results have implications for counseling individuals with ADSD, as well as the need for education and awareness about ADSD.

  7. [Bilateral reversed palmaris longus muscle--a rare cause of peripheral median nerve compression syndrome. Case report].

    PubMed

    Giunta, R; Brunner, U; Wilhelm, K

    1993-10-01

    A rare case of median nerve compression syndrome outside the carpal tunnel in the distal forearm is reported. A 21-year-old man suffered while working from symptoms of temporary median nerve compression in both forearms; this was caused by hypertrophy of reversed palmaris longus muscles. Resection of the abnormal muscle bellies relieved the symptoms immediately. Only ten similar cases have been reported in the literature, and this is the first case with bilateral symptoms.

  8. Avulsion fracture of the extensor carpi radialis longus carpal insertion due to a basketball injury: case report and literature review.

    PubMed

    Robert, N; Zbili, D; Bellity, J; Doursounian, L; Mauprivez, R

    2014-12-01

    Articular fractures of the base of the 2nd metacarpal involving the extensor carpi radialis longus insertion are unusual and poorly understood. There is no consensus as to how these fractures should be treated. We report the case of a 2nd metacarpal base fracture in a professional basketball player that was treated surgically with open reduction and internal fixation using cannulated screws. The management of this case is compared to similar cases in the literature.

  9. Anomalous bilateral contribution of extensor pollicis longus and muscle fusion of the first compartment of the wrist

    PubMed Central

    Rosa, Rodrigo César; de Oliveira, Kennedy Martinez; Léo, Jorge Alfredo; Elias, Bruno Adriano Borges; dos Santos, Paulo Ricardo; de Santiago, Hildemberg Agostinho Rocha

    2016-01-01

    Knowledge of the anatomical variations of the muscles of the first dorsal compartments of the wrist is clinically relevant to De Quervain's tenosynovitis and to reconstructive surgeries. In the literature, there are many reports of the presence of multiple insertion tendons in the first dorsal compartment of the wrist, but few reports describe occurrences of fusion and muscle contributions. This case report describes an anomalous bilateral contribution of the extensor pollicis longus. This anomalous contribution was found through a slender auxiliary tendon that crossed laterally under the extensor retinaculum, entered the first dorsal compartment of the wrist and merged with the tendon of the extensor pollicis brevis muscle. In the same cadaver in which this contribution was present, there was atypical muscle fusion of the abductor pollicis longus muscle and extensor pollicis brevis muscle. In conclusion, anomalous bilateral contribution of the extensor pollicis longus muscle and atypical muscle fusion, concomitant with a variant insertion pattern, are the highlight of this case report. Furthermore, it is concluded that additional tendons may be effectively used in reconstructive surgeries, but that there is a need for knowledge of the possible numerical and positional variations of these tendons, with a view to making more effective surgical plans. PMID:27069895

  10. Heat stress attenuates skeletal muscle atrophy of extensor digitorum longus in streptozotocin-induced diabetic rats.

    PubMed

    Nonaka, K; Une, S; Akiyama, J

    2015-09-01

    To investigate whether heat stress attenuates skeletal muscle atrophy of the extensor digitorum longus (EDL) muscle in streptozotocin-induced diabetic rats, 12-week-old male Wistar rats were randomly assigned to four groups (n = 6 per group): control (Con), heat stress (HS), diabetes mellitus (DM), and diabetes mellitus/heat stress (DM + HS). Diabetes was induced by intraperitoneal injection of streptozotocin (50 mg/kg). Heat stress was induced in the HS and DM + HS groups by immersion of the lower half of the body in hot water at 42 °C for 30 min; it was initiated 7 days after injection of streptozotocin, and was performed once a day, five times a week for 3 weeks. The muscle fiber cross-sectional area of EDL muscles from diabetic and non-diabetic rats was determined; heat stress protein (HSP) 72 and HSP25 expression levels were also analyzed by western blotting. Diabetes-induced muscle fiber atrophy was attenuated upon heat stress treatment in diabetic rats. HSP72 and HSP25 expression was upregulated in the DM + HS group compared with the DM group. Our findings suggest that heat stress attenuates atrophy of the EDL muscle by upregulating HSP72 and HSP25 expression. PMID:26551745

  11. Comparison of transfer sites for flexor digitorum longus in a cadaveric adult acquired flatfoot model.

    PubMed

    Vaudreuil, Nicholas J; Ledoux, William R; Roush, Grant C; Whittaker, Eric C; Sangeorzan, Bruce J

    2014-01-01

    Posterior tibialis tendon (PTT) dysfunction (PTTD) is associated with adult acquired flatfoot deformity. PTTD is commonly treated with a flexor digitorum longus (FDL) tendon transfer (FDLTT) to the navicular (NAV), medial cuneiform (CUN), or distal residuum of the degraded PTT (rPTT). We assessed the kinetic and kinematic outcomes of these three attachment sites using cadaveric gait simulation. Three transfer locations (NAV, CUN, rPTT) were tested on seven prepared flatfoot models using a robotic gait simulator (RGS). The FDLTT procedures were simulated by pulling on the PTT with biomechanically realistic FDL forces (rPTT) or by pulling on the transected FDL tendon after fixation to the navicular or medial cuneiform (NAV and CUN, respectively). Plantar pressure and foot bone motion were quantified. Peak plantar pressure significantly decreased from the flatfoot condition at the first metatarsal (NAV) and hallux (CUN). No difference was found in the medial-lateral center of pressure. Kinematic findings showed minimal differences between flatfoot and FDLTT specimens. The three locations demonstrated only minimal differences from the flatfoot condition, with the NAV and CUN procedures resulting in decreased medial pressures. Functionally, all three surgical procedures performed similarly.

  12. Anatomical variation of abductor pollicis longus in Indian population: A cadaveric study

    PubMed Central

    Tewari, Jerina; Mishra, Pravash Ranjan; Tripathy, Sujit Kumar

    2015-01-01

    Background: Many authors have reported the anatomical variation of abductor pollicis longus (APL) around the wrist and its association with de Quervain tenosynovitis (DQT), first carpo-metacarpal arthritis, and trapezio-metacarpal subluxation. From Indian subcontinent, there is only one original article and a few case reports on the variability of APL tendon insertion. Materials and Methods: Fifty formaldehyde preserved cadaveric wrists were dissected to look for the anatomical variation of APL in the Indian population. Results: The APL was found with single tendon in 2, double in 31, triple in 8, and quadruple in 8 extremities. A maximum of 6 tendon-slips were found in one cadaveric wrist. In all hands, the APL had at least one attachment to first metacarpal bone and in 46 hands (92%), there was second insertion to the trapezium bone. Of all tendon-slips of APL (n = 126), 44% of tendons (68 tendons) were inserted into the base of the first metacarpal bone. This was followed by the insertion into the trapezium in 42% tendons (52 tendons). Conclusion: Bi-tendinous APL is commonly observed on the dorsal compartment of the wrist in Indian population and these tendon-slips are commonly attached to the first metacarpal base and trapezium. This variation must be understood by the Indian Orthopedic surgeons as the response to treatment of DQT and reason for first carpo-metacarpal arthritis can be dependent on this anatomical variation. PMID:26538762

  13. Effects of methylmercury on the motor and sensory innervation of the rat extensor digitorum longus muscle

    SciTech Connect

    Yip, R.K.; Riley, D.A.

    1987-06-01

    The histochemical study examined the effects of chronic methylmercury (MeHg) intoxication on the motor and sensory innervation of extensor digitorum longus muscles. Light microscopic examination of silver-stained axons in the intramuscular nerve bundles of MeHg-treated rats showed Wallerian-like degeneration and a reduction in the number of nerve fibers. Disrupted axons were predominantly sensory because 22.2% of spindle afferents (I/sub a/) and 90.0% of Golgi tendon organ (I/sub b/) sensory fibers were completely degenerated whereas less than 1% of motor ending were totally destroyed. Partial disruption occurred in the cholinesterase and motor terminals of 13.7% of endplates. Their results demonstrated greater vulnerability of sensory nerves than of motor nerves to MeHg-induced degeneration. Thus, the abnormal reflexes, ataxia, and muscle weakness following MeHg poisoning appear related to reduction of proprioceptive feedback from muscles and tendons irradiation to the documented lesions in the central nervous system.

  14. Comparison of transfer sites for flexor digitorum longus in a cadaveric adult acquired flatfoot model.

    PubMed

    Vaudreuil, Nicholas J; Ledoux, William R; Roush, Grant C; Whittaker, Eric C; Sangeorzan, Bruce J

    2014-01-01

    Posterior tibialis tendon (PTT) dysfunction (PTTD) is associated with adult acquired flatfoot deformity. PTTD is commonly treated with a flexor digitorum longus (FDL) tendon transfer (FDLTT) to the navicular (NAV), medial cuneiform (CUN), or distal residuum of the degraded PTT (rPTT). We assessed the kinetic and kinematic outcomes of these three attachment sites using cadaveric gait simulation. Three transfer locations (NAV, CUN, rPTT) were tested on seven prepared flatfoot models using a robotic gait simulator (RGS). The FDLTT procedures were simulated by pulling on the PTT with biomechanically realistic FDL forces (rPTT) or by pulling on the transected FDL tendon after fixation to the navicular or medial cuneiform (NAV and CUN, respectively). Plantar pressure and foot bone motion were quantified. Peak plantar pressure significantly decreased from the flatfoot condition at the first metatarsal (NAV) and hallux (CUN). No difference was found in the medial-lateral center of pressure. Kinematic findings showed minimal differences between flatfoot and FDLTT specimens. The three locations demonstrated only minimal differences from the flatfoot condition, with the NAV and CUN procedures resulting in decreased medial pressures. Functionally, all three surgical procedures performed similarly. PMID:24115238

  15. Classification system for flexor digitorum accessorius longus muscle variants within the leg: clinical correlations.

    PubMed

    Hur, Mi-Sun; Won, Hyung-Sun; Oh, Chang-Seok; Chung, In-Hyuk; Lee, Woo-Chun; Yoon, Young Cheol

    2014-10-01

    The flexor digitorum accessorius longus (FDAL), a variant leg muscle, can cause tarsal tunnel syndrome. This study was performed to classify the variants of the FDAL by dissection and to correlate the dissection results with clinical cases of tarsal tunnel syndrome caused by this muscle. Eighty lower limbs of embalmed Korean cadavers were dissected. MR images of two clinical cases of tarsal tunnel syndrome caused by the FDAL were correlated with the dissection results. The FDAL was observed in nine out of 80 specimens (11.3%) and it was classified into three types depending on its site of origin and its relationship to the posterior tibial neurovascular bundle (PTNV) in the leg. In Type I (6.3%), the FDAL originated in the leg and ran superficially along the PTNV, either not crossing (Type Ia, 3.8%) or crossing (Type Ib, 2.5%) the neurovascular bundle. In Type II (6.3%), it originated in the tarsal tunnel. Most FDALs followed a similar course in the tarsal tunnel and the plantar pedis. On correlating the MR images of the clinical cases with this classification, the FDAL corresponded to Types Ia and II. All three types of FDAL can compress the tibial nerve in the tarsal tunnel or the distal leg. Clarification of the topographical relationship between this muscle and the PTNV would help to improve the results of surgery for tarsal tunnel syndrome caused by the FDAL.

  16. Anatomic study of the abductor pollicis longus: a source for grafting material of the hand.

    PubMed

    Bravo, Elena; Barco, Raul; Bullón, Adrian

    2010-05-01

    Interposition grafting material is used frequently to treat osteoarthritis of the base of the thumb or tendinous and ligamentous injuries of the hand. The observation of duplicated tendons in the first dorsal compartment of the hand prompted us to explore the possibility of using the accessory abductor pollicis longus (AAPL) tendon as grafting material. Based on dissections of 78 cadaveric upper limbs, we describe the number of tendons in the first dorsal compartment of the hand, the number of muscle bellies, their innervation, their insertion site, and the tendon dimensions to determine whether the AAPL can be considered a true tendon. The AAPL was present in 85% of the hands. Average length, width, and thickness (in millimeters) of the APL were of 69.3, 5.2, and 2.1, respectively. Average length, width, and thickness (in millimeters) of the AAPL were of 69.2, 3.3, and 1.6, respectively. No differences in dimension of the tendons were found between the APL and the AAPL. The dimensions of the tendinous portion of the AAPL are similar to those of the APL and can be considered a true tendon. When present, the AAPL is a suitable source of local grafting material.

  17. Anatomic Study of the Abductor Pollicis Longus: A Source for Grafting Material of the Hand

    PubMed Central

    Barco, Raul; Bullón, Adrian

    2009-01-01

    Interposition grafting material is used frequently to treat osteoarthritis of the base of the thumb or tendinous and ligamentous injuries of the hand. The observation of duplicated tendons in the first dorsal compartment of the hand prompted us to explore the possibility of using the accessory abductor pollicis longus (AAPL) tendon as grafting material. Based on dissections of 78 cadaveric upper limbs, we describe the number of tendons in the first dorsal compartment of the hand, the number of muscle bellies, their innervation, their insertion site, and the tendon dimensions to determine whether the AAPL can be considered a true tendon. The AAPL was present in 85% of the hands. Average length, width, and thickness (in millimeters) of the APL were of 69.3, 5.2, and 2.1, respectively. Average length, width, and thickness (in millimeters) of the AAPL were of 69.2, 3.3, and 1.6, respectively. No differences in dimension of the tendons were found between the APL and the AAPL. The dimensions of the tendinous portion of the AAPL are similar to those of the APL and can be considered a true tendon. When present, the AAPL is a suitable source of local grafting material. PMID:19760470

  18. Vocal outcome after endoscopic thyroarytenoid myoneurectomy in patients with adductor spasmodic dysphonia.

    PubMed

    Gandhi, Sachin; Remacle, Marc; Mishra, Prasun; Desai, Vrushali

    2014-12-01

    Spasmodic dysphonia (SD) remains one of the most difficult of laryngeal pathologies to treat. With limited role for speech therapy, various surgical modalities have been tried with various success rates. The objective of the study is to report the results of vocal outcome after thyroarytenoid myoneurectomy in patients of adductor spasmodic dysphonia (ASD). 15 patients of ASD were selected. GRBAS, and voice handicap index (VHI) were used for perceptual evaluation of voice. Thyroarytenoid myoneurectomy was performed by vaporizing the muscular layer of the vocal fold with CO2 laser, at an intensity of 6 W with 1.2 mm diameter in scanner mode. Voice analysis was repeated at 12, 24 and 48 months follow-up. Preoperative GRBAS scores and VHI score of all the patients were poor. At 12 months 12/15 (80 %) patients having strain score of 0. There was marked improvement in VHI scores at 6 months. 10/15 (67 %) patients have been followed up for 24 months. 5/10 (50 %) patients have strain (S) value of 0. VHI scoring of 5/10 (50 %) patients was <30. Two of the four patients completed 48 months follow-up had a strain (S) value of 0, one patient has strain value of 1 and one patient had strain value of 2. 2/4 patients had VHI score of <30; one patient had that of 40. Trans-oral CO2 laser thyroarytenoid myoneurectomy shows significant long-term improvement in voice quality in terms of reduced speech brakes, effort and strain in voice.

  19. Abnormal motor cortex excitability during linguistic tasks in adductor-type spasmodic dysphonia.

    PubMed

    Suppa, A; Marsili, L; Giovannelli, F; Di Stasio, F; Rocchi, L; Upadhyay, N; Ruoppolo, G; Cincotta, M; Berardelli, A

    2015-08-01

    In healthy subjects (HS), transcranial magnetic stimulation (TMS) applied during 'linguistic' tasks discloses excitability changes in the dominant hemisphere primary motor cortex (M1). We investigated 'linguistic' task-related cortical excitability modulation in patients with adductor-type spasmodic dysphonia (ASD), a speech-related focal dystonia. We studied 10 ASD patients and 10 HS. Speech examination included voice cepstral analysis. We investigated the dominant/non-dominant M1 excitability at baseline, during 'linguistic' (reading aloud/silent reading/producing simple phonation) and 'non-linguistic' tasks (looking at non-letter strings/producing oral movements). Motor evoked potentials (MEPs) were recorded from the contralateral hand muscles. We measured the cortical silent period (CSP) length and tested MEPs in HS and patients performing the 'linguistic' tasks with different voice intensities. We also examined MEPs in HS and ASD during hand-related 'action-verb' observation. Patients were studied under and not-under botulinum neurotoxin-type A (BoNT-A). In HS, TMS over the dominant M1 elicited larger MEPs during 'reading aloud' than during the other 'linguistic'/'non-linguistic' tasks. Conversely, in ASD, TMS over the dominant M1 elicited increased-amplitude MEPs during 'reading aloud' and 'syllabic phonation' tasks. CSP length was shorter in ASD than in HS and remained unchanged in both groups performing 'linguistic'/'non-linguistic' tasks. In HS and ASD, 'linguistic' task-related excitability changes were present regardless of the different voice intensities. During hand-related 'action-verb' observation, MEPs decreased in HS, whereas in ASD they increased. In ASD, BoNT-A improved speech, as demonstrated by cepstral analysis and restored the TMS abnormalities. ASD reflects dominant hemisphere excitability changes related to 'linguistic' tasks; BoNT-A returns these excitability changes to normal.

  20. The dependence of force enhancement on activation in human adductor pollicis.

    PubMed

    Oskouei, Ali E; Herzog, Walter

    2006-09-01

    It has been well recognized that the steady-state isometric force after active muscle/fiber stretch is greater than the corresponding isometric force for electrically stimulated muscles and maximal voluntary contractions (MVC). However, recent evidence obtained for sub-MVC suggests that force enhancement properties are different from those observed for electrically induced and MVC. Specifically, it appears that force enhancement is activation-dependent and that there is a subject-specific threshold for force enhancement in sub-MVC. To address these suggestions, the relationship between force enhancement and voluntary activation during stretch was investigated in 11 healthy subjects. Human adductor pollicis muscles were studied and force enhancement was measured while muscle activation during the steady-state isometric phase was controlled at a level of 30% of MVC. In order to study the effects of activation on force enhancement, subjects performed stretch contractions at 0, 10, 30, 60, and 100% of maximal voluntary effort while the steady-state isometric force after stretch, obtained at 30% of activation in all cases, was compared to the corresponding values measured in the isometric reference contractions. There was no force enhancement if muscle stretching occurred passively but all subjects showed force enhancement when muscle stretching occurred at maximal voluntary effort. When increasing the level of activation during the stretch phase, force enhancement increased, and the number of subjects who showed force enhancement increased as well. We conclude from these results that force enhancement during voluntary contractions is activation-dependent with a threshold that is subject-specific.

  1. Mandibular corpus strain in primates: further evidence for a functional link between symphyseal fusion and jaw-adductor muscle force.

    PubMed

    Hylander, W L; Ravosa, M J; Ross, C F; Johnson, K R

    1998-11-01

    Previous work indicates that compared to adult thick-tailed galagos, adult long-tailed macaques have much more bone strain on the balancing-side mandibular corpus during unilateral isometric molar biting (Hylander [1979a] J. Morphol. 159:253-296). Recently we have confirmed in these same two species the presence of similar differences in bone-strain patterns during forceful mastication. Moreover, we have also recorded mandibular bone strain patterns in adult owl monkeys, which are slightly smaller than the galago subjects. The owl monkey data indicate the presence of a strain pattern very similar to that recorded for macaques, and quite unlike that recorded for galagos. We interpret these bone-strain pattern differences to be importantly related to differences in balancing-side jaw-adductor muscle force recruitment patterns. That is, compared to galagos, macaques and owl monkeys recruit relatively more balancing-side jaw-adductor muscle force during forceful mastication. Unlike an earlier study (Hylander [1979b] J. Morphol. 160:223-240), we are unable to estimate the actual amount of working-side muscle force relative to balancing-side muscle force (i.e., the W/B muscle force ratio) in these species because we have no reliable estimate of magnitude, direction, and precise location of the bite force during mastication. A comparison of the mastication data with the earlier data recorded during isometric molar biting, however, supports the hypothesis that the two anthropoids have a small W/B jaw-adductor muscle force ratio in comparison to thick-tailed galagos. These data also support the hypothesis that increased recruitment of balancing-side jaw-adductor muscle force in anthropoids is functionally linked to the evolution of symphyseal fusion or strengthening. Moreover, these data refute the hypothesis that the recruitment pattern differences between macaques and thick-tailed galagos are due to allometric factors. Finally, although the evolution of symphyseal fusion

  2. Results of Abductor Pollicis Longus Suspension Ligamentoplasty for Treatment of Advanced First Carpometacarpal Arthritis

    PubMed Central

    Lee, Hyun-Joo; Kim, Poong-Taek; Deslivia, Maria Florencia; Lee, Suk-Joong; Nam, Sang-Jin

    2015-01-01

    Background Suspension ligamentoplasty using abductor pollicis longus (APL) tendon without bone tunneling, was introduced as one of the techniques for treatment of advanced first carpometacarpal (CMC) arthritis. The purpose of this study was to evaluate the radiologic and clinical results of APL suspension ligamentoplasty. Methods The medical records of 19 patients who underwent APL suspension ligamentoplasty for advanced first CMC arthritis between January 2008 and May 2012 were reviewed retrospectively. The study included 13 female and 6 male patients, whose mean age was 62 years (range, 43 to 82 years). For clinical evaluation, we assessed the grip and pinch power, radial and volar abduction angle, thumb adduction (modified Kapandji index), including visual analogue scale (VAS) and Disabilities of the Arm, Shoulder and Hand (DASH) scores. Radiologic evaluation was performed using simple radiographs. Results The mean follow-up was 36 months (range, 19 to 73.7 months). Mean power improved from 18.3 to 27 kg for grip power, from 2.8 to 3.5 kg for tip pinch, and from 4.3 to 5.4 kg for power pinch. All patients showed decreased VAS from 7.2 to 1.7. Radial abduction improved from 71° preoperatively to 82° postoperatively. The modified Kapandji index showed improvement from 6 to 7.3, and mean DASH was improved from 41 to 17.8. The height of the space decreased from 10.8 to 7.1 mm. Only one case had a complication involving temporary sensory loss of the first dorsal web space, which resolved spontaneously. Conclusions The APL suspension ligamentoplasty for treatment of advanced first CMC arthritis yielded satisfactory functional results. PMID:26330961

  3. RNA-seq transcriptome analysis of extensor digitorum longus and soleus muscles in large white pigs.

    PubMed

    Zhu, Jiayu; Shi, Xin'e; Lu, Hongzhao; Xia, Bo; Li, Yuefeng; Li, Xiao; Zhang, Qiangling; Yang, Gongshe

    2016-04-01

    Skeletal muscle fibers are mainly categorized into red and white fiber types, and the ratio of red/white fibers within muscle mass plays a crucial role in meat quality such as tenderness and flavor. To better understand the molecular difference between the two muscle fibers, this study takes advantage of RNA-seq to compare differences in the transcriptome between extensor digitorum longus (EDL; white fiber) and soleus (Sol; red fiber) muscles of large white pigs. In total, 89,658,562 and 46,723,568 raw reads from EDL and Sol were generated, respectively. Comparison between the two transcriptomes revealed 561 differentially expressed genes, with 408 displaying higher and 153 lower levels of expression in Sol. Quantitative real-time polymerase chain reaction validated the differential expression of nine genes. Gene ontology and Kyoto Encyclopedia of Genes and Genomes pathway analysis discovered several differentially enriched biological functions and processes of the two muscles. Moreover, transcriptome comparison between EDL and Sol identified many muscle-related genes (CSRP3, ACTN2, MYL1, and MYH6) and pathways related to myofiber formation, such as focal adhesion, tight junction formation, extracellular matrix (ECM)-receptor pathway, calcium signaling, and Wnt signaling. In addition, 58,362 and 58,359 single nucleotide polymorphisms were identified in EDL and Sol, respectively, and the sequence of 9069 genes was refined at the 5', 3' or both ends. Numerous novel transcripts and alternatively spliced RNAs were also identified. Our transcriptome analysis constitutes valuable sequence resource for uncovering important genes and pathways involved in muscle fiber type determination, and might help further our understanding of the molecular mechanisms in different types of muscle.

  4. Low-intensity resistance training attenuates dexamethasone-induced atrophy in the flexor hallucis longus muscle.

    PubMed

    Macedo, Anderson G; Krug, André L O; Herrera, Naiara A; Zago, Anderson S; Rush, James W E; Amaral, Sandra L

    2014-09-01

    This study investigated the potential protective effect of low-intensity resistance training (RT) against dexamethasone (DEX) treatment induced muscle atrophy. Rats underwent either an 8 week period of ladder climbing RT or remained sedentary. During the last 10 days of the exercise protocol, animals were submitted to a DEX treatment or a control saline injection. Muscle weights were assessed and levels of AKT, mTOR, FOXO3a, Atrogin-1 and MuRF-1 proteins were analyzed in flexor hallucis longus (FHL), tibialis anterior (TA), and soleus muscles. DEX induced blood glucose increase (+46%), body weight reduction (-19%) and atrophy in FHL (-28%) and TA (-21%) muscles, which was associated with a decrease in AKT and an increase in MuRF-1 proteins levels. Low-intensity RT prevented the blood glucose increase, attenuated the FHL atrophy effects of DEX, and was associated with increased mTOR and reductions in Atrogin-1 and MuRF-1 in FHL. In contrast, TA muscle atrophy and signaling proteins were not affected by RT. These are the first data to demonstrate that low-intensity ladder-climbing RT specifically mitigates the FHL atrophy, which is the main muscle recruited during the training activity, while not preventing atrophy in other limb muscle not as heavily recruited. The recruitment-dependent prevention of atrophy by low intensity RT likely occurs by a combination of attenuated muscle protein degradation signals and enhanced muscle protein synthesis signals including mTOR, Atrogin-1 and MuRF-1.

  5. Cranial muscles of the anurans Leiopelma hochstetteri and Ascaphus truei and the homologies of the mandibular adductors in Lissamphibia and other gnathostomes.

    PubMed

    Johnston, Peter

    2011-12-01

    The frogs Ascaphus truei and Leiopelma hochstetteri are members of the most basal lineages of extant anurans. Their cranial muscles have not been previously described in full and are investigated here by dissection. Comparison of these taxa is used to review a controversy regarding the homologies of the jaw adductor muscles in Lissamphibia, to place these homologies in a wider gnathostome context, and to define features that may be useful for cladistic analysis of Anura. A new muscle is defined in Ascaphus and is designated m. levator anguli oris. The differences noted between Ascaphus and Leiopelma are in the penetration of the jaw adductor muscles by the mandibular nerve (V3). In the traditional view of this anatomy, the paths of the trigeminal nerve branches define homologous muscles. This scheme results in major differences among frogs, salamanders, and caecilians. The alternative view is that the topology of origins, insertions, and fiber directions are defining features, and the nerves penetrate the muscle mass in a variable way. The results given here support the latter view. A new model is proposed for Lissamphibia, whereby the adductor posterior (levator articularis) is a separate entity, and the rest of the adductor mass is configured around it as a folded sheet. This hypothesis is examined in other gnathostomes, including coelacanth and lungfish, and a possible sequence for the evolution of the jaw muscles is demonstrated. In this system, the main jaw adductor in teleost fish is not considered homologous with that of tetrapods. This hypothesis is consistent with available data on the domain of expression of the homeobox gene engrailed 2, which has previously not been considered indicative of homology. Terminology is discussed, and "adductor mandibulae" is preferred to "levator mandibulae" to align with usage in other gnathostomes.

  6. Cranial muscles of the anurans Leiopelma hochstetteri and Ascaphus truei and the homologies of the mandibular adductors in Lissamphibia and other gnathostomes.

    PubMed

    Johnston, Peter

    2011-12-01

    The frogs Ascaphus truei and Leiopelma hochstetteri are members of the most basal lineages of extant anurans. Their cranial muscles have not been previously described in full and are investigated here by dissection. Comparison of these taxa is used to review a controversy regarding the homologies of the jaw adductor muscles in Lissamphibia, to place these homologies in a wider gnathostome context, and to define features that may be useful for cladistic analysis of Anura. A new muscle is defined in Ascaphus and is designated m. levator anguli oris. The differences noted between Ascaphus and Leiopelma are in the penetration of the jaw adductor muscles by the mandibular nerve (V3). In the traditional view of this anatomy, the paths of the trigeminal nerve branches define homologous muscles. This scheme results in major differences among frogs, salamanders, and caecilians. The alternative view is that the topology of origins, insertions, and fiber directions are defining features, and the nerves penetrate the muscle mass in a variable way. The results given here support the latter view. A new model is proposed for Lissamphibia, whereby the adductor posterior (levator articularis) is a separate entity, and the rest of the adductor mass is configured around it as a folded sheet. This hypothesis is examined in other gnathostomes, including coelacanth and lungfish, and a possible sequence for the evolution of the jaw muscles is demonstrated. In this system, the main jaw adductor in teleost fish is not considered homologous with that of tetrapods. This hypothesis is consistent with available data on the domain of expression of the homeobox gene engrailed 2, which has previously not been considered indicative of homology. Terminology is discussed, and "adductor mandibulae" is preferred to "levator mandibulae" to align with usage in other gnathostomes. PMID:21845732

  7. Subcutaneous Rupture of the Extensor Pollicis Longus Tendon after Corticosteroid Injections for DeQuervain's Stenosing Tenovaginitis

    PubMed Central

    Boussakri, Hassan; Bouali, Amara

    2014-01-01

    DeQuervain's stenosing tenovaginitis is a common condition. Nonsurgical treatment by corticosteroid injection has significantly improved the management of this disease. The authors describe a case of subcutaneous rupture of the extensor pollicis longus tendon at the wrist, three months after two corticosteroid injections for DeQuervain's stenosing tenovaginitis. The etiological history has not found any trauma history of the wrist. The aim of our work is to draw attention to this rare complication and discuss its therapeutic management. Our functional results were excellent. PMID:25371839

  8. Technical tips: reconstruction of deep and superficial deltoid ligaments by peroneus longus tendon in stage 4 posterior tibial tendon dysfunction.

    PubMed

    Lui, T H

    2014-12-01

    The deltoid ligament is composed of the superficial and deep layers. Disruption of the deltoid ligament can occur in rotational ankle fracture, chronic ankle instability, or stage 4 posterior tibial tendon dysfunction. Correcting valgus tilt at the time of flatfoot reconstruction in case of stage 4 posterior tibial tendon dysfunction may prevent future collapse and the need for ankle arthrodesis or possibly ankle arthroplasty. We describe a technique of reconstruction of both the superficial and deep deltoid ligaments by peroneus longus tendon. PMID:25457670

  9. Interference screw fixation and short harvest using flexor digitorum longus (FDL) transfer for posterior tibial tendon dysfunction: a technique.

    PubMed

    Bussewitz, Bradly W; Hyer, Christopher F

    2010-01-01

    Posterior tibial tendon dysfunction is a common clinical entity treated by foot and ankle specialists, and numerous surgical treatments are available to the modern foot and ankle surgeon. Fixation methods are constantly evolving as new products are developed and new uses for existing products are attempted. Interference screw fixation is the gold standard fixation for tendon autograft and allograft in orthopedic sports medicine. The technique that we describe in this article uses a less extensive harvest of the flexor digitorum longus tendon and a sound fixation method using an interference screw positioned in the tarsal navicular. PMID:20797592

  10. Cerebral Palsy Tendon Transfers: Flexor Carpi Ulnaris to Extensor Carpi Radialis Brevis and Extensor Pollicis Longus Reroutement.

    PubMed

    Bansal, Anchal; Wall, Lindley B; Goldfarb, Charles A

    2016-08-01

    The flexor carpi ulnaris to extensor carpi radialis brevis transfer and extensor pollicis longus rerouting combined with thenar release are 2 successful surgical interventions for children with spastic cerebral palsy. The goal of both procedures is to improve quality of life for patients who have previously failed conservative management, and the degree of expected improvement is predicated on several patient variables, making careful patient selection crucial for ensuring successful outcomes. Here, surgical technique is described; risk factors are discussed, and outcomes related to both procedures are presented. PMID:27387086

  11. [Symptomatic os trigonum with irritation of the flexor hallucis longus tendon - arthroscopic management via a dorsal approach].

    PubMed

    Pass, G; Hofstaetter, S G; Trieb, K

    2015-03-01

    Therapy-resistant pain in the region of the medial mallelous in the presence of an os trigonum is suggestive for irritation of the flexor hallucis longus tendon. Two patients were treated by arthroscopy in the prone position via a dorsal approach; the os trigonum was removed and the tendon released. Under the conditions of blunt dissection, dorsal arthroscopy of the os trigonum is a safe and expedient operation in our toolbox. After two weeks of partial load-bearing with 2 crutches, pain-free full load-bearing is already possible and after 3 weeks the patients can return to work.

  12. Allograft reconstruction of peroneus longus and brevis tendons tears arising from a single muscular belly. Case report and surgical technique.

    PubMed

    Pellegrini, Manuel J; Adams, Samuel B; Parekh, Selene G

    2015-03-01

    Anatomic variants of the peroneal tendons may cause tendon disorders. Moreover, there is a lack of evidence on how to address chronic tendon pathology when a variant of the peroneal tendons is causing the patient's symptoms. We present a patient with an uncommon peroneal muscle presentation: a single muscular belly dividing into both the peroneus longus and brevis tendons. After extensive debridement of tendinopathic tissue, primary repair or tenodesis was not possible; therefore a unique solution for this problem was performed, reconstructing both peroneal tendons using a semitendinosus allograft.

  13. Intrarater reliabilities of shoulder joint horizontal adductor muscle strength measurements using a handheld dynamometer for geriatric and stroke patients.

    PubMed

    Hirano, Masahiro; Katoh, Munenori; Kawaguchi, Saori; Uemura, Tomomi

    2016-01-01

    [Purpose] This study aimed to verify the appropriate number of measurements and the intrarater reliabilities of shoulder joint horizontal adductor muscle strength measurements using a handheld dynamometer (HHD) for geriatric and stroke patients. [Subjects and Methods] The subjects were 40 inpatients, who were divided into two groups: 20 stroke patients in the stroke group (SG), and 20 geriatric patients in the no-stroke group (N-SG). Measurements were performed three times using an HHD with a belt. The reliability was verified using Bland-Altman analysis and the intraclass correlation coefficient (ICC). [Results] ICC (1, 1) was >0.9. A systematic bias was not observed between the first and second measurement values except for the right side in N-SG. A systematic bias between the maximum value obtained during the first and second measurements and third measurement value was observed on the left side in N-SG, and on the non-paralyzed side in SG: the third measurement values were small in both cases. [Conclusion] Intrarater reliabilities were high for shoulder horizontal adductor strength measurements using an HHD with a belt for geriatric and stroke patients. Taking the systematic bias into consideration, these findings suggest that the required number of measurements is two. PMID:26957727

  14. Impact of Retropubic vs. Transobturator Slings for Urinary Incontinence on Myofascial Structures of the Pelvic Floor, Adductor and Abdominal Muscles.

    PubMed

    Beilecke, K; Soeder, S; Hufenbach, E; Tunn, R

    2014-01-01

    Suburethral tension-free slings (tapes or bands) are an essential component in the operative treatment of urinary incontinence. In the present contribution the influence of the type of suburethral sling (retropubic vs. transobturator) on the myofascial structures of the abdominal, adductor and pelvic floor muscles is examined. For this purpose, 70 patients were prospectively observed clinically and physiotherapeutically. Significant differences were seen in the improvement of the pelvic floor musculature (strength, endurance, speed) after placement of a suburethral sling, irrespective of whether it was of the retropubic or the transobturator type. Thus, after surgical treatment patients should be encouraged to undertake further pelvic floor exercising or this should be prescribed for them. There were no significant changes in the abdominal and adductor muscles but there were slight increases with regard to pain level, pain on palpation, and trigger points after placement of both types of sling; thus this is not a criterion in the decision as to which type of sling to use. PMID:24741121

  15. Treatment Efficacy of Electromyography versus Fiberscopy-Guided Botulinum Toxin Injection in Adductor Spasmodic Dysphonia Patients: A Prospective Comparative Study

    PubMed Central

    Kim, Jae Wook; Park, Jae Hong; Park, Ki Nam; Lee, Seung Won

    2014-01-01

    Introduction. This study prospectively evaluates and compares the treatment efficacy of botulinum toxin injection under electromyography guidance (EMG group) and percutaneous botulinum toxin injection under flexible fiberscopic guidance (fiberscopy group). Methods. Thirty patients with adductor spasmodic dysphonia (ADSD), who had never received treatment, were randomly allocated into EMG- or fiberscopy-guided botulinum toxin injections between March 2008 and February 2010. We assessed acoustic and aerodynamic voice parameters, and the voice handicap index (VHI) before injection and at 1, 3, and 6 months after injection. Results. The mean total dosage of botulinum toxin was similar for both groups: 1.7 ± 0.5 U for the EMG group and 1.8 ± 0.4 U for the fiberscopy group (P > 0.05). There were no significant differences in outcomes between the two groups in either the duration of effectiveness or complications such as breathy voice and aspiration. Conclusion. Botulinum toxin injection under fiberscopic guidance is a viable alternative to EMG-guided botulinum toxin injection for the treatment of adductor spasmodic dysphonia when EMG equipment is unavailable. PMID:25383369

  16. Entrapment of the saphenous nerve at the adductor canal affecting the infrapatellar branch – a report on two cases

    PubMed Central

    Porr, Jason; Chrobak, Karen; Muir, Brad

    2013-01-01

    Objective: To present 2 cases of entrapment of the saphenous nerve at the adductor canal affecting the infrapatellar branch, and to provide insight into the utilization of nerve tension testing for the diagnosis of nerve entrapments in a clinical setting. Rationale: Saphenous nerve entrapments are a very rare condition within today’s body of literature, and the diagnosis remains controversial. Clinical Features: Two cases of chronic knee pain that were unresponsive to previous treatment. The patients were diagnosed with an entrapment of the saphenous nerve at the adductor canal affecting the infrapatellar branch using nerve tension techniques along with a full clinical examination. Intervention and Outcome: Manual therapy and rehabilitation programs were initiated including soft tissue therapy, nerve gliding techniques and gait retraining which resulted in 90% improvement in one case and complete resolution of symptoms in the second. Conclusion: Nerve tension testing may prove to be an aid in the diagnosis of saphenous nerve entrapments within a clinical setting in order to decrease time to diagnosis and proper treatment. PMID:24302782

  17. Immediate effect of static and proprioceptive neuromuscular facilitation stretching on hip adductor flexibility in female ballet dancers.

    PubMed

    Rubini, Ercole C; Souza, Andréa C; Mello, Mônica L; Bacurau, Reury F P; Cabral, Leonardo F; Farinatti, Paulo T V

    2011-01-01

    The aim of the present study was to investigate the immediate effects of static and proprioceptive neuromuscular facilitation (PNF) stretching on the flexibility of hip adductors in female ballet dancers. Forty-five subjects (age: 28.5 ± 8.0 years; minimum two years of ballet training) were randomly assigned to three groups: PNF (contract-release technique), Static, and Control. Subjects in the PNF and Static groups performed four sets of 30 second stretching with an interval of 30 seconds between sets. The control group stayed at rest for the same time spent by the PNF and Static groups during the stretching sessions. Maximal range of motion was measured before and immediately after the experimental and control protocols in all groups. The results indicated significant differences between pre- and post-stretching flexibility in both PNF and Static groups (p < 0.0001; effect size = 0.24 and 0.39, respectively), whereas no change was identified in the Control group (p = 0.265). However, no differences in post-exercise flexibility were found between PNF and Static groups (p = 0.235). It is concluded that static and PNF stretching methods provoked similar post-exercise acute effects on the maximal range of motion of hip adductors in highly flexible female ballet dancers.

  18. Type IV Longus Pilus of Enterotoxigenic Escherichia coli: Occurrence and Association with Toxin Types and Colonization Factors among Strains Isolated in Argentina

    PubMed Central

    Pichel, Mariana G.; Binsztein, Norma; Qadri, Firdausi; Girón, Jorge A.

    2002-01-01

    The longus type IV pilus structural gene (lngA) was sought among 217 clinical enterotoxigenic Escherichia coli (ETEC) strains isolated in Argentina. lngA was present in 20.7% of the isolates and was highly associated with ETEC producing heat-stable toxin and the most common colonization factors. The prevalence of longus among ETEC strains in Argentina was comparable to that of colonization factor antigen I (CFA/I), CFA/II, and CFA/IV in other regions of the world. PMID:11826000

  19. Synaptic rearrangements and alterations in motor unit properties in neonatal rat extensor digitorum longus muscle.

    PubMed Central

    Balice-Gordon, R J; Thompson, W J

    1988-01-01

    1. We have used in vitro intracellular recordings and measurements of the contractile properties of single motor units to examine the changes in muscle innervation occurring during the post-natal development of a fast-twitch muscle in the hindlimb of the rat, the extensor digitorum longus (EDL). 2. Intracellular recordings of end-plate potentials evoked in response to graded stimulation of the nerve supply to the muscle indicate that during the first day after birth, each muscle fibre receives synaptic input from at least two motoneurones and that some muscle fibres receive as many as six such inputs. With subsequent development, most of this polyneuronal innervation is eliminated: the first singly innervated fibres are encountered on day 3; by day 18 fewer than 5% of the fibres remain polyneuronally innervated. These results show that there are quantitative differences in post-natal synapse elimination in EDL compared to its well-studied counterpart, the soleus. Although the great majority of fibres in both muscles become singly innervated at about 18 days, the first singly innervated fibres appear at least a week earlier in the EDL. None the less, synapses are lost from EDL at about half the rate they are lost from soleus. 3. The number of motor units, determined by counting the number of twitch increments produced by graded stimulation of ventral root filaments teased to contain only a few EDL motor axons, remains unchanged from an average of forty-one from post-natal day 1 to day 17. In addition, the number of muscle fibres counted in muscle cross-sections stained with an anti-myosin antibody increases less than 10% from birth to adulthood. Therefore, synapse elimination in EDL occurs with a largely constant population of muscle fibres as well as motoneurones. 4. Measurements of tensions generated by single motor units indicate that the average size of a motor unit declines from 6.8% of the muscle fibres at day 1 to 2.3% at 17 days. This result indicates that

  20. Parrotfish grazing ability: interspecific differences in relation to jaw-lever mechanics and relative weight of adductor mandibulae on an Okinawan coral reef.

    PubMed

    Nanami, Atsushi

    2016-01-01

    Parrotfishes (family Labridae: Scarini) are regarded to have important roles for maintaining the ecosystem balance in coral reefs due to their removal of organic matter and calcic substrates by grazing. The purpose of the present study was to clarify the interspecific differences in grazing ability of five parrotfish species (Chlorurus sordidus, C. bowersi, Scarus rivulatus, S. niger and S. forsteni) in relation to interspecific differences in jaw-lever mechanics and the relative weight of the adductor mandibulae (muscles operating jaw closing). The grazing ability was calculated by using stomach contents (CaCO3 weight/organic matter weight) defined as the grazing ability index (GAI). There were significant interspecific differences in GAI (C. sordidus = C. bowersi > S. rivulatus > S. niger = S. forsteni). Teeth of C. sordidus and C. bowersi were protrusive-shape whereas teeth of S. rivulatus, S. niger and S. forsteni were flat-shape. C. sordidus and C. bowersihave jaw-lever mechanics producing a greater biting force and have a larger weight of adductor mandibulae. S. rivulatus has jaw-lever mechanics producing a greater biting force but a smaller weight of adductor mandibulae that produce an intermediate biting force. In contrast, S. niger and S. forsteni have jaw-lever mechanics producing a lesser biting force and have a smaller weight of adductor mandibulae. Feeding rates and foray size of S. rivulatus, S. niger and S. forsteni were greater than C. sordidus and C. bowersi. The degree in bioerosion (GAI × feeding rate) was the largest for S. rivulatusand the smallest for S. forsteni. The degree in bioerosion for C. sordidus was larger than S. niger whereas relatively equal between C. bowersi and S. niger. These results suggest that interspecific difference in GAI was explained by interspecific differences in teeth shape, jaw-lever mechanics and relative weight of adductor mandibulae. The interspecific difference in the degree of bioerosion suggests the

  1. Parrotfish grazing ability: interspecific differences in relation to jaw-lever mechanics and relative weight of adductor mandibulae on an Okinawan coral reef

    PubMed Central

    2016-01-01

    Parrotfishes (family Labridae: Scarini) are regarded to have important roles for maintaining the ecosystem balance in coral reefs due to their removal of organic matter and calcic substrates by grazing. The purpose of the present study was to clarify the interspecific differences in grazing ability of five parrotfish species (Chlorurus sordidus, C. bowersi, Scarus rivulatus, S. niger and S. forsteni) in relation to interspecific differences in jaw-lever mechanics and the relative weight of the adductor mandibulae (muscles operating jaw closing). The grazing ability was calculated by using stomach contents (CaCO3 weight/organic matter weight) defined as the grazing ability index (GAI). There were significant interspecific differences in GAI (C. sordidus = C. bowersi > S. rivulatus > S. niger = S. forsteni). Teeth of C. sordidus and C. bowersi were protrusive-shape whereas teeth of S. rivulatus, S. niger and S. forsteni were flat-shape. C. sordidus and C. bowersihave jaw-lever mechanics producing a greater biting force and have a larger weight of adductor mandibulae. S. rivulatus has jaw-lever mechanics producing a greater biting force but a smaller weight of adductor mandibulae that produce an intermediate biting force. In contrast, S. niger and S. forsteni have jaw-lever mechanics producing a lesser biting force and have a smaller weight of adductor mandibulae. Feeding rates and foray size of S. rivulatus, S. niger and S. forsteni were greater than C. sordidus and C. bowersi. The degree in bioerosion (GAI × feeding rate) was the largest for S. rivulatusand the smallest for S. forsteni. The degree in bioerosion for C. sordidus was larger than S. niger whereas relatively equal between C. bowersi and S. niger. These results suggest that interspecific difference in GAI was explained by interspecific differences in teeth shape, jaw-lever mechanics and relative weight of adductor mandibulae. The interspecific difference in the degree of bioerosion suggests the

  2. Morphological and biochemical changes in soleus and extensor digitorum longus muscles of rats orbited in Spacelab 3

    NASA Technical Reports Server (NTRS)

    Riley, D. A.; Slocum, T.; Bain, J. L. W.; Sedlak, F. R.; Elis, S.; Satyanarayana, T.

    1985-01-01

    Muscle atrophy in rats exposed to hypogravity for seven days aboard Spacelab 3 is examined. Hindlimb muscles were harvested 12-16 days postflight, and prepared for enzyme studies and electron microscopy. Simple cell shrinkage was found, with a mean fiber area decrease of 35.8 percent for soleus and 24.9 percent for extensor digitorum longus (EDL) flight muscle fibers, as compared with control muscle fibers. EDL and soleus muscles showed increases in alkaline myofibrillar ATPase, alpha glycerophosphate dehydrogenase, and glycogen, and a decrease in NADH dehydrogenase staining. The 26 percent increase in calcium activated protease suggests that the focal degradation of myofibrils is the key process of myofibril breakdown. The presence in the flight soleus muscles of one percent necrotic fibers is unexplained. The observed shift towards histochemical fast-muscle type properties is consistent with previous findings.

  3. Hallux saltans due to flexor hallucis longus entrapment at a previously unreported site in an unskilled manual laborer: a case report.

    PubMed

    Purushothaman, Rajesh; Karuppal, Raju; Inassi, Jojo; Valsalan, Rejith

    2012-01-01

    Triggering of the big toe, or hallux saltans, is commonly due to stenosing tenosynovitis of the flexor hallucis longus at the fibro-osseous tunnel below the sustentaculum tali. It is a rare condition described mainly in female ballet dancers. This is hypothesized to be due to the en pointe position used in ballet, which puts enormous supraphysiologic loads on the flexor hallucis longus, predisposing it to injury. Trigger hallux is extremely uncommon in the general population. We are reporting a case of hallux saltans in an unskilled manual laborer, with the site of tendon entrapment just proximal to the medial malleolus in the distal leg, a hitherto unreported location of stenosis. PMID:22459424

  4. Extensor pollicis brevis tendon can hyperextend thumb interphalangeal joint in absence of extensor pollicis longus: Case report and review of the literature

    PubMed Central

    Strauch, Robert J; Strauch, Carolyn B

    2016-01-01

    We are reporting a case of extensor pollicis longus tendon rupture which did not require tendon transfer owing to the ability of the intact extensor pollicis brevis (EPB) to fully hyperextend the thumb interphalangeal joint. The thumb metacarpophalangeal joint was also able to be fully actively extended by the EPB. Previous anatomical studies have demonstrated that the insertional anatomy of the EPB tendon is highly variable and sometimes inserts onto the extensor hood and distal phalanx, which is likely the mechanism by which our patient was able to fully extend the thumb interphalangeal joint. Despite the potential for the EPB to extend the IP joint of the thumb, virtually all previously reported cases of extensor pollicis longus (EPL) tendon rupture had deficits of thumb IP extension requiring tendon transfer. This case highlights the potential ability of the EPB tendon to completely substitute for the function of the EPL tendon in providing thumb IP joint extension. PMID:27458556

  5. Extensor pollicis brevis tendon can hyperextend thumb interphalangeal joint in absence of extensor pollicis longus: Case report and review of the literature.

    PubMed

    Strauch, Robert J; Strauch, Carolyn B

    2016-07-18

    We are reporting a case of extensor pollicis longus tendon rupture which did not require tendon transfer owing to the ability of the intact extensor pollicis brevis (EPB) to fully hyperextend the thumb interphalangeal joint. The thumb metacarpophalangeal joint was also able to be fully actively extended by the EPB. Previous anatomical studies have demonstrated that the insertional anatomy of the EPB tendon is highly variable and sometimes inserts onto the extensor hood and distal phalanx, which is likely the mechanism by which our patient was able to fully extend the thumb interphalangeal joint. Despite the potential for the EPB to extend the IP joint of the thumb, virtually all previously reported cases of extensor pollicis longus (EPL) tendon rupture had deficits of thumb IP extension requiring tendon transfer. This case highlights the potential ability of the EPB tendon to completely substitute for the function of the EPL tendon in providing thumb IP joint extension. PMID:27458556

  6. Potential use of fatty acid profiles of the adductor muscle of cockles (Cerastoderma edule) for traceability of collection site.

    PubMed

    Ricardo, Fernando; Pimentel, Tânia; Moreira, Ana S P; Rey, Felisa; Coimbra, Manuel A; Rosário Domingues, M; Domingues, Pedro; Costa Leal, Miguel; Calado, Ricardo

    2015-06-18

    Geographic traceability of seafood is key for controlling its quality and safeguarding consumers' interest. The present study assessed if the fatty acid (FA) profile of the adductor muscle (AM) of fresh cockles (Cerastoderma edule) can be used to discriminate the origin of specimens collected in different bivalve capture/production areas legally defined within a coastal lagoon. Results suggest that this biochemical approach holds the potential to trace sampling locations with a spatial resolution <10 Km, even for areas with identical classification for bivalve production. Cockles further away from the inlet, i.e. in areas exposed to a higher saline variation, exhibited lower levels of saturated fatty acids, which are key for stabilizing the bilayer structure of cell membranes, and a higher percentage of polyunsaturated fatty acids, which enhance bilayer fluidity. Results suggest that the structural nature of the lipids present in the AM provides a stable fatty acid signature and holds potential for tracing the origin of bivalves to their capture/production areas.

  7. Lower values of handgrip strength and adductor pollicis muscle thickness are associated with hepatic encephalopathy manifestations in cirrhotic patients.

    PubMed

    Augusti, L; Franzoni, L C; Santos, L A A; Lima, T B; Ietsugu, M V; Koga, K H; Moriguchi, S M; Betting, L E; Caramori, C A; Silva, G F; Romeiro, F G

    2016-08-01

    Hepatic encephalopathy (HE) is a late complication of liver cirrhosis and is clearly associated with poor outcomes. Chronic liver insufficiency leads to progressive muscle wasting, impairing ammonia metabolism and thus increasing the risk for HE. Given the association between lean mass and adductor pollicis muscle thickness (APMT), it has been used to predict outcome and complications in many conditions, but not yet in cirrhotic patients. Therefore, this article aimed to study the association between HE manifestations and measures related to muscle mass and strength. This cross-sectional study included 54 cirrhotic outpatients with HE varying from subclinical to grade II according to the West-Haven criteria, who were submitted to neuropsychometric tests, electroencephalogram, brain Single Photon Emission Computed Tomography (SPECT), anthropometric measurements, handgrip strength (HGS) and dual energy X-ray absorptiometry exam (DXA). Multiple logistic regression analysis was performed to investigate the association between body composition measures and HE grade. Analysis of the area under the receiver operator characteristic (AUROC) curve revealed the values related to neurological manifestations (HE grades I and II). Reductions in APMT and HGS were associated with higher HE grades, suggesting a big impact caused by the loss of muscle mass and function on HE severity. The link between HE manifestations and anthropometric measures, namely APMT and HGS, point to a significant relation concerning skeletal muscles and the neurological impairment in this population. PMID:27131802

  8. Aggressive Lymphoma "Sarcoma Mimicker" Originating in the Gluteus and Adductor Muscles: A Case Report and Literature Review.

    PubMed

    Elkourashy, Sarah A; Nashwan, Abdulqadir J; Alam, Syed I; Ammar, Adham A; El Sayed, Ahmed M; Omri, Halima El; Yassin, Mohamed A

    2016-01-01

    Extranodal lymphoma (ENL) occurs in approximately 30%-40% of all patients with non-Hodgkin lymphoma and has been described in almost all organs and tissues. However, diffuse large B-cell lymphoma is the most common histological subtype of non-Hodgkin lymphoma, primarily arising in the retroperitoneal region. In this article, we report a rare case of an adult male diagnosed with primary diffuse large B-cell lymphoma of the gluteal and adductor muscles with aggressive bone involvement. All appropriate radiological and histopathological studies were done for diagnosis and staging. After discussion with the lymphoma multidisciplinary team, it was agreed to start on R-CHOP protocol (rituximab, cyclophosphamide, doxorubicin (Adriamycin), vincristine (Oncovin®), and prednisone) as the standard of care, which was later changed to R-CODOX-M/R-IVAC protocol (rituximab, cyclophosphamide, vincristine (Oncovin®), doxorubicin, and high-dose methotrexate alternating with rituximab, ifosfamide, etoposide, and high-dose cytarabine) due to inadequate response. Due to the refractory aggressive nature of the disease, subsequent decision of the multidisciplinary team was salvage chemotherapy and autologous stem cell transplant. The aim of this case report was to describe and evaluate the clinical presentation and important radiological features of extranodal lymphoma affecting the musculoskeletal system. PMID:27398038

  9. Aggressive Lymphoma “Sarcoma Mimicker” Originating in the Gluteus and Adductor Muscles: A Case Report and Literature Review

    PubMed Central

    Elkourashy, Sarah A.; Nashwan, Abdulqadir J.; Alam, Syed I.; Ammar, Adham A.; El Sayed, Ahmed M.; Omri, Halima El; Yassin, Mohamed A.

    2016-01-01

    Extranodal lymphoma (ENL) occurs in approximately 30%–40% of all patients with non-Hodgkin lymphoma and has been described in almost all organs and tissues. However, diffuse large B-cell lymphoma is the most common histological subtype of non-Hodgkin lymphoma, primarily arising in the retroperitoneal region. In this article, we report a rare case of an adult male diagnosed with primary diffuse large B-cell lymphoma of the gluteal and adductor muscles with aggressive bone involvement. All appropriate radiological and histopathological studies were done for diagnosis and staging. After discussion with the lymphoma multidisciplinary team, it was agreed to start on R-CHOP protocol (rituximab, cyclophosphamide, doxorubicin (Adriamycin), vincristine (Oncovin®), and prednisone) as the standard of care, which was later changed to R-CODOX-M/R-IVAC protocol (rituximab, cyclophosphamide, vincristine (Oncovin®), doxorubicin, and high-dose methotrexate alternating with rituximab, ifosfamide, etoposide, and high-dose cytarabine) due to inadequate response. Due to the refractory aggressive nature of the disease, subsequent decision of the multidisciplinary team was salvage chemotherapy and autologous stem cell transplant. The aim of this case report was to describe and evaluate the clinical presentation and important radiological features of extranodal lymphoma affecting the musculoskeletal system. PMID:27398038

  10. Potential use of fatty acid profiles of the adductor muscle of cockles (Cerastoderma edule) for traceability of collection site.

    PubMed

    Ricardo, Fernando; Pimentel, Tânia; Moreira, Ana S P; Rey, Felisa; Coimbra, Manuel A; Rosário Domingues, M; Domingues, Pedro; Costa Leal, Miguel; Calado, Ricardo

    2015-01-01

    Geographic traceability of seafood is key for controlling its quality and safeguarding consumers' interest. The present study assessed if the fatty acid (FA) profile of the adductor muscle (AM) of fresh cockles (Cerastoderma edule) can be used to discriminate the origin of specimens collected in different bivalve capture/production areas legally defined within a coastal lagoon. Results suggest that this biochemical approach holds the potential to trace sampling locations with a spatial resolution <10 Km, even for areas with identical classification for bivalve production. Cockles further away from the inlet, i.e. in areas exposed to a higher saline variation, exhibited lower levels of saturated fatty acids, which are key for stabilizing the bilayer structure of cell membranes, and a higher percentage of polyunsaturated fatty acids, which enhance bilayer fluidity. Results suggest that the structural nature of the lipids present in the AM provides a stable fatty acid signature and holds potential for tracing the origin of bivalves to their capture/production areas. PMID:26084395

  11. Potential use of fatty acid profiles of the adductor muscle of cockles (Cerastoderma edule) for traceability of collection site

    PubMed Central

    Ricardo, Fernando; Pimentel, Tânia; Moreira, Ana S. P.; Rey, Felisa; Coimbra, Manuel A.; Rosário Domingues, M.; Domingues, Pedro; Costa Leal, Miguel; Calado, Ricardo

    2015-01-01

    Geographic traceability of seafood is key for controlling its quality and safeguarding consumers’ interest. The present study assessed if the fatty acid (FA) profile of the adductor muscle (AM) of fresh cockles (Cerastoderma edule) can be used to discriminate the origin of specimens collected in different bivalve capture/production areas legally defined within a coastal lagoon. Results suggest that this biochemical approach holds the potential to trace sampling locations with a spatial resolution <10 Km, even for areas with identical classification for bivalve production. Cockles further away from the inlet, i.e. in areas exposed to a higher saline variation, exhibited lower levels of saturated fatty acids, which are key for stabilizing the bilayer structure of cell membranes, and a higher percentage of polyunsaturated fatty acids, which enhance bilayer fluidity. Results suggest that the structural nature of the lipids present in the AM provides a stable fatty acid signature and holds potential for tracing the origin of bivalves to their capture/production areas. PMID:26084395

  12. Parrotfish grazing ability: interspecific differences in relation to jaw-lever mechanics and relative weight of adductor mandibulae on an Okinawan coral reef

    PubMed Central

    2016-01-01

    Parrotfishes (family Labridae: Scarini) are regarded to have important roles for maintaining the ecosystem balance in coral reefs due to their removal of organic matter and calcic substrates by grazing. The purpose of the present study was to clarify the interspecific differences in grazing ability of five parrotfish species (Chlorurus sordidus, C. bowersi, Scarus rivulatus, S. niger and S. forsteni) in relation to interspecific differences in jaw-lever mechanics and the relative weight of the adductor mandibulae (muscles operating jaw closing). The grazing ability was calculated by using stomach contents (CaCO3 weight/organic matter weight) defined as the grazing ability index (GAI). There were significant interspecific differences in GAI (C. sordidus = C. bowersi > S. rivulatus > S. niger = S. forsteni). Teeth of C. sordidus and C. bowersi were protrusive-shape whereas teeth of S. rivulatus, S. niger and S. forsteni were flat-shape. C. sordidus and C. bowersihave jaw-lever mechanics producing a greater biting force and have a larger weight of adductor mandibulae. S. rivulatus has jaw-lever mechanics producing a greater biting force but a smaller weight of adductor mandibulae that produce an intermediate biting force. In contrast, S. niger and S. forsteni have jaw-lever mechanics producing a lesser biting force and have a smaller weight of adductor mandibulae. Feeding rates and foray size of S. rivulatus, S. niger and S. forsteni were greater than C. sordidus and C. bowersi. The degree in bioerosion (GAI × feeding rate) was the largest for S. rivulatusand the smallest for S. forsteni. The degree in bioerosion for C. sordidus was larger than S. niger whereas relatively equal between C. bowersi and S. niger. These results suggest that interspecific difference in GAI was explained by interspecific differences in teeth shape, jaw-lever mechanics and relative weight of adductor mandibulae. The interspecific difference in the degree of bioerosion suggests the

  13. Parrotfish grazing ability: interspecific differences in relation to jaw-lever mechanics and relative weight of adductor mandibulae on an Okinawan coral reef.

    PubMed

    Nanami, Atsushi

    2016-01-01

    Parrotfishes (family Labridae: Scarini) are regarded to have important roles for maintaining the ecosystem balance in coral reefs due to their removal of organic matter and calcic substrates by grazing. The purpose of the present study was to clarify the interspecific differences in grazing ability of five parrotfish species (Chlorurus sordidus, C. bowersi, Scarus rivulatus, S. niger and S. forsteni) in relation to interspecific differences in jaw-lever mechanics and the relative weight of the adductor mandibulae (muscles operating jaw closing). The grazing ability was calculated by using stomach contents (CaCO3 weight/organic matter weight) defined as the grazing ability index (GAI). There were significant interspecific differences in GAI (C. sordidus = C. bowersi > S. rivulatus > S. niger = S. forsteni). Teeth of C. sordidus and C. bowersi were protrusive-shape whereas teeth of S. rivulatus, S. niger and S. forsteni were flat-shape. C. sordidus and C. bowersihave jaw-lever mechanics producing a greater biting force and have a larger weight of adductor mandibulae. S. rivulatus has jaw-lever mechanics producing a greater biting force but a smaller weight of adductor mandibulae that produce an intermediate biting force. In contrast, S. niger and S. forsteni have jaw-lever mechanics producing a lesser biting force and have a smaller weight of adductor mandibulae. Feeding rates and foray size of S. rivulatus, S. niger and S. forsteni were greater than C. sordidus and C. bowersi. The degree in bioerosion (GAI × feeding rate) was the largest for S. rivulatusand the smallest for S. forsteni. The degree in bioerosion for C. sordidus was larger than S. niger whereas relatively equal between C. bowersi and S. niger. These results suggest that interspecific difference in GAI was explained by interspecific differences in teeth shape, jaw-lever mechanics and relative weight of adductor mandibulae. The interspecific difference in the degree of bioerosion suggests the

  14. The prevalence and anatomical characteristics of the accessory head of the flexor pollicis longus muscle: a meta-analysis

    PubMed Central

    Roy, Joyeeta; Henry, Brandon M.; Pękala, Przemysław A.; Vikse, Jens; Ramakrishnan, Piravin Kumar; Walocha, Jerzy A.

    2015-01-01

    Background and Objectives. The accessory head of the flexor pollicis longus muscle (AHFPL), also known as the Gantzer’s muscle, was first described in 1813. The prevalence rates of an AHFPL significantly vary between studies, and no consensus has been reached on the numerous variations reported in its origin, innervation, and relationships to the Anterior Interosseous Nerve (AIN) and the Median Nerve (MN). The aim of our study was to determine the true prevalence of AHFPL and to study its associated anatomical characteristics. Methods. A search of the major electronic databases PubMed, EMBASE, Scopus, ScienceDirect, and Web of Science was performed to identify all articles reporting data on the prevalence of AHPFL in the population. No date or language restriction was set. Additionally, an extensive search of the references of all relevant articles was performed. Data on the prevalence of the AHFPL in upper limbs and its anatomical characteristics and relationships including origin, insertion, innervation, and position was extracted and pooled into a meta-analysis using MetaXL version 2.0. Results. A total of 24 cadaveric studies (n = 2,358 upper limb) were included in the meta-analysis. The pooled prevalence of an AHFPL was 44.2% (95% CI [0.347–0.540]). An AHFPL was found more commonly in men than in women (41.1% vs. 24.1%), and was slightly more prevalent on the right side than on the left side (52.8% vs. 45.2%). The most common origin of the AHFPL was from the medial epicondyle of the humerus with a pooled prevalence of 43.6% (95% CI [0.166–0.521]). In most cases, the AHFPL inserted into the flexor pollicis longus muscle (94.6%, 95% CI [0.731–1.0]) and was innervated by the AIN (97.3%, 95% CI [0.924–0.993]). Conclusion. The AHFPL should be considered as more a part of normal anatomy than an anatomical variant. The variability in its anatomical characteristics, and its potential to cause compression of the AIN and MN, must be taken into account by

  15. The prevalence and anatomical characteristics of the accessory head of the flexor pollicis longus muscle: a meta-analysis.

    PubMed

    Roy, Joyeeta; Henry, Brandon M; Pękala, Przemysław A; Vikse, Jens; Ramakrishnan, Piravin Kumar; Walocha, Jerzy A; Tomaszewski, Krzysztof A

    2015-01-01

    Background and Objectives. The accessory head of the flexor pollicis longus muscle (AHFPL), also known as the Gantzer's muscle, was first described in 1813. The prevalence rates of an AHFPL significantly vary between studies, and no consensus has been reached on the numerous variations reported in its origin, innervation, and relationships to the Anterior Interosseous Nerve (AIN) and the Median Nerve (MN). The aim of our study was to determine the true prevalence of AHFPL and to study its associated anatomical characteristics. Methods. A search of the major electronic databases PubMed, EMBASE, Scopus, ScienceDirect, and Web of Science was performed to identify all articles reporting data on the prevalence of AHPFL in the population. No date or language restriction was set. Additionally, an extensive search of the references of all relevant articles was performed. Data on the prevalence of the AHFPL in upper limbs and its anatomical characteristics and relationships including origin, insertion, innervation, and position was extracted and pooled into a meta-analysis using MetaXL version 2.0. Results. A total of 24 cadaveric studies (n = 2,358 upper limb) were included in the meta-analysis. The pooled prevalence of an AHFPL was 44.2% (95% CI [0.347-0.540]). An AHFPL was found more commonly in men than in women (41.1% vs. 24.1%), and was slightly more prevalent on the right side than on the left side (52.8% vs. 45.2%). The most common origin of the AHFPL was from the medial epicondyle of the humerus with a pooled prevalence of 43.6% (95% CI [0.166-0.521]). In most cases, the AHFPL inserted into the flexor pollicis longus muscle (94.6%, 95% CI [0.731-1.0]) and was innervated by the AIN (97.3%, 95% CI [0.924-0.993]). Conclusion. The AHFPL should be considered as more a part of normal anatomy than an anatomical variant. The variability in its anatomical characteristics, and its potential to cause compression of the AIN and MN, must be taken into account by physicians to

  16. Neglected Achilles Tendon Rupture Treated with Flexor Hallucis Longus transfer with two turndown gastrocnemius fascia flap and reinforced with plantaris tendon.

    PubMed

    Mao, Haijiao; Shi, Zengyuan; Xu, Dachuan; Liu, Zhenxin

    2015-09-01

    Neglected Achilles Tendon Ruptures are commonly seen by orthopaedic surgeons. In cases resistant to conservative treatment, a variety of surgical procedures have been utilized in the past. The senior -surgeon at our institution has utilized a technique -employing two turndown fascia flaps fashioned from the proximal Achilles tendon augmented by a tenomyodesis of the flexor hallucis longus and plantaris tendon. The purpose of this study was to assess the clinical outcome of all patients who underwent this procedure. The medical records of 10 cases that underwent this procedure were retrospectively reviewed. We completed data collection sets using the American Orthopaedic Foot and Ankle Society ankle-hind foot scores, isokinetic evaluation, and postoperative magnetic resonance imaging (MRI) at 1 year of follow-up. The mean American Orthopaedic Foot and Ankle Society ankle-hind foot scores improved from 64.4±3.54. Isokinetic testing at 30º/sec and 120º/sec revealed an mean deficits of 24.5%, respectively, in the plantar flexion peak torque of the involved ankle than non-involved ankle. The flexor hallucis longus tendon, gastrocnemius fascia flap and plantaris were well -integrated into the Achilles tendon forming a homogenous tendon, which was confirmed in MRI. Our subjective and objective data indicate that the reconstructive technique using flexor hallucis longus transfer with two turndown gastrocnemius fascia flaps and plantaris tendon is a good option for repairing large gap defect of Achilles tendon.

  17. The influence of electrical stimulation in vitro on protein synthesis and other metabolic parameters of rat extensor digitorum longus muscle

    PubMed Central

    Pain, Virginia M.; Manchester, K. L.

    1970-01-01

    1. Apparatus is described in which rat extensor digitorum longus muscle can be incubated in buffer under conditions of light tension and be subject to contractures induced by electrical stimulation in vitro. Under these conditions the tissue retains its weight, its content of potassium and size of the extracellular space at values similar to those in vivo. 2. Though uptake of glucose was enhanced on addition of insulin, there was little increase in glucose consumption on stimulation. Breakdown of glycogen and enhancement of lactate output were found on stimulation. 3. Incorporation into protein of several labelled amino acids was diminished during stimulation. Accumulation of [14C]leucine was enhanced whereas that of glycine was decreased. 4. There were no very consistent changes in the content of free unlabelled amino acids during incubation with or without stimulation. Comparison of actual amino acid concentrations in tissue and incubation mixture with accumulation of 14C-labelled amino acid indicated that full equilibration of the cell pool of amino amino acids with the medium is slow. 5. Substantial oxidation of several 14C-labelled acids was observed. 6. The ATP content of the tissue declined a little during incubation and somewhat faster after a period of stimulation. 7. The results are discussed in relation to the way in which exercise can induce muscle hypertrophy. PMID:5484664

  18. Extensor Pollicis Longus Injury in Addition to De Quervain’s with Text Messaging on Mobile Phones

    PubMed Central

    Kumar, Bhaskaranand; Bhat, Anil K; Venugopal, Anand

    2014-01-01

    Objective: To do a clinical and ultrasonic evaluation of subjects with thumb pain with text messaging. Background: Thumbs are commonly used for text messaging, which are not as well designed for fine manipulative or dexterous work. Repetitive use as in text messaging can lead to the injury to the tendons of the thumb. Materials and Methods: Ninety eight students with symptoms of Repetitive Strain Type of injuries of the thumb were selected from a survey and evaluated both clinically and by ultrasound analysis of the musculotendinous unit of the thumb to note changes due to excessive use of the mobile phone. Age and sex matched controls were also subjected to ultrasound evaluation. Results: Clinical examination showed positive Finkelstein test in 40% of the cases, significant reduction in the lateral and tip pinch strengths in the cases. Ultrasound detected changes in the first and the third compartments in 19% of the cases. Conclusion: Isolated cases of pain in the thumb have been reported but this study noted changes both clinically and by ultrasound in the tendons of the thumb. These changes should be taken as warning signs of possible subclinical changes taking place in the soft tissues of the thumb in these subjects due to repetitive use of mobile phones and thus, making them prone for developing painful Musculoskeletal Disorders. Application: Repetitive use of mobile phones for text messaging can lead to the damage of Extensor pollicis longus of the thumb in addition to the tendons of the first compartment of the wrist. PMID:25584249

  19. Comparative proteomic analysis of the aging soleus and extensor digitorum longus rat muscles using TMT labeling and mass spectrometry.

    PubMed

    Chaves, Daniela F S; Carvalho, Paulo C; Lima, Diogo B; Nicastro, Humberto; Lorenzeti, Fábio M; Siqueira-Filho, Mário; Hirabara, Sandro M; Alves, Paulo H M; Moresco, James J; Yates, John R; Lancha, Antonio H

    2013-10-01

    Sarcopenia describes an age-related decline in skeletal muscle mass, strength, and function that ultimately impairs metabolism and leads to poor balance, frequent falling, limited mobility, and a reduction in quality of life. Here we investigate the pathogenesis of sarcopenia through a proteomic shotgun approach. In brief, we employed tandem mass tags to quantitate and compare the protein profiles obtained from young versus old rat slow-twitch type of muscle (soleus) and a fast-twitch type of muscle (extensor digitorum longus, EDL). Our results disclose 3452 and 1848 proteins identified from soleus and EDL muscles samples, of which 78 and 174 were found to be differentially expressed, respectively. In general, most of the proteins were structural related and involved in energy metabolism, oxidative stress, detoxification, or transport. Aging affected soleus and EDL muscles differently, and several proteins were regulated in opposite ways. For example, pyruvate kinase had its expression and activity different in both soleus and EDL muscles. We were able to verify with existing literature many of our differentially expressed proteins as candidate aging biomarkers and, most importantly, disclose several new candidate biomarkers such as the glioblastoma amplified sequence, zero β-globin, and prolargin. PMID:24001182

  20. Analgesic Efficacy of Adductor Canal Block in Total Knee Arthroplasty: A Meta-analysis and Systematic Review.

    PubMed

    Jiang, Xu; Wang, Qian-Qian; Wu, Cheng-Ai; Tian, Wei

    2016-08-01

    The aim of this meta-analysis and systematic review of randomized controlled trials (RCTs) was to evaluate the efficacy and safety of adductor canal block (ACB) for early postoperative pain management in patients undergoing total knee arthroplasty (TKA). Relevant manuscripts comparing ACB with saline or femoral nerve block (FNB) in TKA patients were searched for in the databases of PubMed, EMBASE, and Cochrane library. The outcomes assessed included cumulative analgesic consumption, pain at rest or during movement, ability to ambulate, quadriceps strength, and complications (nausea, vomiting or sedation). For continuous outcomes, pooled effects were measured using weighted mean difference (WMD) or standard mean difference (SMD), together with 95% confidence intervals (CIs). For outcomes without sufficient data for synthesis, qualitative interpretation of individual studies was summarized. Finally, 11 RCTs involving 675 patients met the inclusion criteria. The pooled results showed that ACB resulted in less postoperative analgesic consumption than saline (WMD, -12.84 mg; 95% CI, -19.40 mg to -6.27 mg; P < 0.001) and less pain at rest or during activity. No conclusions could be drawn regarding ability to ambulate and quadriceps strength, because only one study reported these variables. Most studies comparing ACB and FNB reported similar effects on postoperative analgesic consumption (WMD, -0.56 mg; 95% CI, -8.05 mg to 6.93 mg; P = 0.884) and pain; however, ability to ambulate and quadriceps strength were significantly better with ACB (SMD, 0.99; 95% CI, 0.04-1.94; P = 0.041). Additionally, ACB did not increase the rate of complications. Our results suggest that, compared with saline, ACB decreases analgesic consumption and offers short-term advantages in terms of pain relief. Compared with FNB, ACB was associated with better ability to ambulate and quadriceps strength. PMID:27627711

  1. What are the stimulation parameters that affect the extent of twitch force potentiation in the adductor pollicis muscle?

    PubMed

    Mettler, Joni A; Griffin, Lisa

    2010-12-01

    Muscle force potentiation affects force output during electrical stimulation. Few studies have examined stimulation train parameters that influence potentiation such as pulse number, stimulation frequency, train duration, and force-time integral and peak force produced during the train. Pulse-matched trains (100 pulses) at 7.5, 15, 25, 30, 50, and 100 Hz, and trains of varying pulse number (50, 100, and 200 pulses) at 30 and 50 Hz were delivered to the ulnar nerve of 10 (5 male, 5 female; 23.4 ± 0.9 years), healthy individuals in random order. Single twitches of the adductor pollicis muscle were elicited before and after each train with a rest interval of at least 5 min between each train. No differences in potentiation occurred across the pulse-matched trains at frequencies of 15-50 Hz (38.9 ± 5.4-44.6 ± 5.5%). Twitch force potentiation following the highest (100 Hz) and lowest (7.5 Hz) frequency trains were not significantly different and were lower than the other 100 pulse-matched trains. As pulse number increased, potentiation increased for both the 30 and 50-Hz trains. There was a significant positive correlation between force potentiation and force-time integral produced by the stimulation train, r = 0.70. The results indicate that potentiation magnitude is dependent on the force-time integral produced during the test train and the number of pulses delivered, independent of stimulation frequency. PMID:20737164

  2. Influence of hip external rotation on hip adductor and rectus femoris myoelectric activity during a dynamic parallel squat.

    PubMed

    Pereira, Glauber Ribeiro; Leporace, Gustavo; Chagas, Daniel das Virgens; Furtado, Luis F L; Praxedes, Jomilto; Batista, Luiz A

    2010-10-01

    This study sought to compare the myoelectric activity of the hip adductors (HAs) and rectus femoris (RF) when the hip was in a neutral position or externally rotated by 30° or 50° (H0, H30, and H50, respectively) during a parallel squat. Ten healthy subjects performed 10 repetitions of squats in each of the 3 hip positions and the myoelectric activities of the HAs and RF were recorded. The signal was then divided into categories representing concentric (C) and eccentric (E) contractions in the following ranges of motion: 0-30° (C1 and E1), 30-60° (C2 and E2), and 60-90° (C3 and E3) of knee flexion. From those signals, an root mean square (RMS) value for each range of motion in each hip position was obtained. All values were normalized to those obtained during maximum voluntary isometric contraction. We found that HAs showed a significant increase in myoelectric activity during C3 and E3 in the H30 and H50 positions, as compared with H0. Meanwhile, RF activity did not significantly differ between hip positions. Both muscles showed higher activation during 60-90° (C3 and E3) of knee flexion, as compared with 0-30° (C1 and E1) and 30-60° (C2 and E2). The results suggest that if the aim is to increase HA activity despite the low percentage of muscle activation, squats should be performed with 30° of external rotation and at least 90° of knee flexion. PMID:20651607

  3. Real-time ultrasound-guided comparison of adductor canal block and psoas compartment block combined with sciatic nerve block in laparoscopic knee surgeries

    PubMed Central

    Messeha, Medhat M.

    2016-01-01

    Background: Lumbar plexus block, combined with a sciatic nerve block, is an effective locoregional anesthetic technique for analgesia and anesthesia of the lower extremity. The aim of this study was to compare the clinical results outcome of the adductor canal block versus the psoas compartment block combined with sciatic nerve block using real time ultrasound guidance in patients undergoing elective laparoscopic knee surgeries. Patients and Methods: Ninety patients who were undergoing elective laparoscopic knee surgeries were randomly allocated to receive a sciatic nerve block in addition to lumbar plexus block using either an adductor canal block (ACB) or a posterior psoas compartment approach (PCB) using 25 ml of bupivacine 0.5% with adrenaline 1:400,000 injection over 2-3 minutes while observing the distribution of the local anesthetic in real time. Successful nerve block was defined as a complete loss of pinprick sensation in the region that is supplied by the three nerves along with adequate motor block, 30 minutes after injection. The degree of motor block was evaluated 30 minutes after the block procedure. The results of the present study showed that the real time ultrasound guidance of PCB is more effective than ACB approach. Although the sensory blockade of the femoral nerve achieved equally by both techniques, the LFC and OBT nerves were faster and more effectively blocked with PCB technique. Also PCB group showed significant complete sensory block without need for general anesthesia, significant decrease in the post-operative VAS and significant increase time of first analgesic requirement as compared to the ACB group. Result and Conclusion: The present study demonstrates that blockade of lumber plexus by psoas compartment block is more effective in complete sensory block without general anesthesia supplementation in addition to decrease post-operative analgesic requirement than adductor canal block. PMID:27212766

  4. Toe Flexor Strength, Flexibility and Function and Flexor Hallucis Longus Tendon Morphology in Dancers and Non-Dancers.

    PubMed

    Rowley, K Michael; Jarvis, Danielle N; Kurihara, Toshiyuki; Chang, Yu-Jen; Fietzer, Abbigail L; Kulig, Kornelia

    2015-09-01

    Tendinopathy of the flexor hallucis longus (FHL), colloquially referred to as "dancer's tendinitis," is a common condition in dancers and attributed to high demand on this muscle in positions of extreme ankle plantarflexion and metatarsophalangeal (MTP)) flexion and extension. Despite such a high prevalence, there has been little research into preventative or nonsurgical interventions. As a means to identify potential targets for prevention and intervention, this study aimed to characterize toe flexors in dancers by measuring strength, flexibility, function, and FHL tendon morphology. Dancers (n=25) were compared to non-dancers (n=25) in toe flexor isometric strength, first MTP joint range of motion, foot longitudinal arch flexibility, balance ability, endurance during modified heel raises without use of the toes, and FHL tendon thickness, cross-sectional area, and peak spatial frequency. Significant differences were found in functional first MTP joint extension (dancers 101.95°, non-dancers 91.15°, p<0.001), balance ability during single-leg stance on the toes (dancers 11.43 s, non-dancers 5.90 s, p=0.013), and during modified heel raises (dancers 22.20 reps, non-dancers 28.80 reps, p=0.001). Findings indicate that dancers rely on toe flexors more than non-dancers to complete balance and heel raise tasks. Efficacy of using this modified heel raise task with the toes off the edge of a block as a means to train larger plantarflexors and as a nonsurgical intervention should be studied in the future. Improving interventions for FHL tendinopathy will be impactful for dancers, in whom this condition is highly prevalent.

  5. Comparative proteomic profiling of soleus, extensor digitorum longus, flexor digitorum brevis and interosseus muscles from the mdx mouse model of Duchenne muscular dystrophy.

    PubMed

    Carberry, Steven; Brinkmeier, Heinrich; Zhang, Yaxin; Winkler, Claudia K; Ohlendieck, Kay

    2013-09-01

    Duchenne muscular dystrophy is due to genetic abnormalities in the dystrophin gene and represents one of the most frequent genetic childhood diseases. In the X-linked muscular dystrophy (mdx) mouse model of dystrophinopathy, different subtypes of skeletal muscles are affected to a varying degree albeit the same single base substitution within exon 23 of the dystrophin gene. Thus, to determine potential muscle subtype-specific differences in secondary alterations due to a deficiency in dystrophin, in this study, we carried out a comparative histological and proteomic survey of mdx muscles. We intentionally included the skeletal muscles that are often used for studying the pathomechanism of muscular dystrophy. Histological examinations revealed a significantly higher degree of central nucleation in the soleus and extensor digitorum longus muscles compared with the flexor digitorum brevis and interosseus muscles. Muscular hypertrophy of 20-25% was likewise only observed in the soleus and extensor digitorum longus muscles from mdx mice, but not in the flexor digitorum brevis and interosseus muscles. For proteomic analysis, muscle protein extracts were separated by fluorescence two-dimensional (2D) gel electrophoresis. Proteins with a significant change in their expression were identified by mass spectrometry. Proteomic profiling established an altered abundance of 24, 17, 19 and 5 protein species in the dystrophin-deficient soleus, extensor digitorum longus, flexor digitorum brevis and interosseus muscle, respectively. The key proteomic findings were verified by immunoblot analysis. The identified proteins are involved in the contraction-relaxation cycle, metabolite transport, muscle metabolism and the cellular stress response. Thus, histological and proteomic profiling of muscle subtypes from mdx mice indicated that distinct skeletal muscles are differentially affected by the loss of the membrane cytoskeletal protein, dystrophin. Varying degrees of perturbed protein

  6. Addressing stage II posterior tibial tendon dysfunction: biomechanically repairing the osseous structures without the need of performing the flexor digitorum longus transfer.

    PubMed

    DiDomenico, Lawrence A; Thomas, Zachary M; Fahim, Ramy

    2014-07-01

    The clinical presentation of adult flatfoot can range from a flexible deformity with normal joint integrity to a rigid, arthritic flat foot. Debate still exists regarding the surgical management of stage II deformities, especially in the presence of medial column instability. This article reviews and discusses various surgical options for the correction of stage II flatfoot reconstructive procedures. The authors discuss their opinion that is not always necessary to transfer the flexor digitorum longus tendon to provide relief and stability in this patient population. The anatomy, diagnosis, and current treatments of flexible flatfoot deformity are discussed. PMID:24980929

  7. Modified arthroscopic excision of the symptomatic os trigonum and release of the flexor hallucis longus tendon: operative technique and case study.

    PubMed

    Lombardi, C M; Silhanek, A D; Connolly, F G

    1999-01-01

    This article presents an operative technique for modified arthroscopic excision of the symptomatic os trigonum and release of the flexor hallucis longus tendon sheath. The procedure uses two stacked posterolateral subtalar joint portals, rather than the customary anterolateral and posterolateral portal combination. By visualizing the os trigonum with an arthroscope positioned in a distal portal and introducing instrumentation through a proximal portal, the ossicle may be quickly exposed and excised with minimal dissection. A case study with a 22-month follow-up and a discussion of os trigonum syndrome are included to illustrate this procedure as an alternative to open excision or traditional arthroscopic excision.

  8. NMR-based metabolomic investigations on the differential responses in adductor muscles from two pedigrees of Manila clam Ruditapes philippinarum to Cadmium and Zinc.

    PubMed

    Wu, Huifeng; Liu, Xiaoli; Zhao, Jianmin; Yu, Junbao

    2011-01-01

    Manila clam Ruditapes philippinarum is one of the most important economic species in shellfishery in China due to its wide geographic distribution and high tolerance to environmental changes (e.g., salinity, temperature). In addition, Manila clam is a good biomonitor/bioindicator in "Mussel Watch Programs" and marine environmental toxicology. However, there are several pedigrees of R. philippinarum distributed in the marine environment in China. No attention has been paid to the biological differences between various pedigrees of Manila clams, which may introduce undesirable biological variation in toxicology studies. In this study, we applied NMR-based metabolomics to detect the biological differences in two main pedigrees (White and Zebra) of R. philippinarum and their differential responses to heavy metal exposures (Cadmium and Zinc) using adductor muscle as a target tissue to define one sensitive pedigree of R. philippinarum as biomonitor for heavy metals. Our results indicated that there were significant metabolic differences in adductor muscle tissues between White and Zebra clams, including higher levels of alanine, glutamine, hypotaurine, phosphocholine and homarine in White clam muscles and higher levels of branched chain amino acids (valine, leucine and isoleucine), succinate and 4-aminobutyrate in Zebra clam muscles, respectively. Differential metabolic responses to heavy metals between White and Zebra clams were also found. Overall, we concluded that White pedigree of clam could be a preferable bioindicator/biomonitor in marine toxicology studies and for marine heavy metals based on the relatively high sensitivity to heavy metals. PMID:22131959

  9. Comparison of Adductor Canal Block and Femoral Nerve Block for Postoperative Pain in Total Knee Arthroplasty: A Systematic Review and Meta-analysis.

    PubMed

    Dong, Cui-Cui; Dong, Shu-Ling; He, Fu-Cheng

    2016-03-01

    A total knee arthroplasty (TKA) has always been associated with moderate-to-severe pain. A systematic review of randomized controlled trials (RCTs) and non-RCTs was performed to evaluate the efficacy and safety of pain control of adductor canal block (ACB) and femoral nerve block (FNB) after TKA.Relevant literatures about the ACB and FNB after TKA for reducing pain were searched from Medline (1996-January, 2015), Embase (1980-January, 2015), PubMed (1980-January, 2015), Web of Science (1980-January, 2015), and The Cochrane Central Register of Controlled Trials. High-quality RCTs and non-RCTs were picked to evaluate the visual analogue scale (VAS) and other outcome. This systematic review and meta-analysis were performed according to the PRISMA statement criteria. The software RevMan 5.30 was used for the meta-analysis.Eight literatures fitted into the inclusion criteria. There were no significant differences in VAS score with rest or mobilization at 4, 24, and 48 h between ACB group and FNB group. There were also no significant differences in the strength of quadriceps and adductor, the length of hospital stay, and complications of vomiting and nausea.Present meta-analysis indicated that ACB shows no superiority than FNB group. Both of them can reduce the pain score after TKA. As referred to which method to adopt, it is determined by the preference of the surgeons and anesthesiologists. PMID:27015172

  10. Effect of Electroacupuncture on the Expression of Glycyl-tRNA Synthetase and Ultrastructure Changes in Atrophied Rat Peroneus Longus Muscle Induced by Sciatic Nerve Injection Injury

    PubMed Central

    Wang, Meng; Zhang, Xiao Ming; Yang, Sheng Bo

    2016-01-01

    Glycyl-tRNA synthetase (GlyRS) is one of the key enzymes involved in protein synthesis. Its mutations have been reported to cause Charcot-Marie-Tooth disease which demonstrates muscular atrophy in distal extremities, particularly manifested in peroneus muscles. In this situation, the dysfunctions of mitochondria and sarcoplasmic reticulum (SR) affect energy supply and excitation-contraction coupling of muscle fibers, therefore resulting in muscular atrophy. Although the treatment of muscular atrophy is a global urgent problem, it can be improved by electroacupuncture (EA) treatment. To investigate the mechanism underlying EA treatment improving muscular atrophy, we focused on the perspective of protein synthesis by establishing a penicillin injection-induced sciatic nerve injury model. In our model, injured rats without treatment showed decreased sciatic functional index (SFI), decreased peroneus longus muscle weight and muscle fiber cross-sectional area, aggregated mitochondria with vacuoles appearing, swollen SR, and downregulated mRNA and protein expression levels of GlyRS and myosin heavy chain IIb (MHC-IIb). The injured rats with EA treatment showed significant recovery. These results indicated that EA stimulation can alleviate peroneus longus muscular atrophy induced by iatrogenic sciatic nerve injury through promoting the recovery of GlyRS and muscle ultrastructure and increasing muscle protein synthesis. PMID:27274754

  11. Effect of Electroacupuncture on the Expression of Glycyl-tRNA Synthetase and Ultrastructure Changes in Atrophied Rat Peroneus Longus Muscle Induced by Sciatic Nerve Injection Injury.

    PubMed

    Wang, Meng; Zhang, Xiao Ming; Yang, Sheng Bo

    2016-01-01

    Glycyl-tRNA synthetase (GlyRS) is one of the key enzymes involved in protein synthesis. Its mutations have been reported to cause Charcot-Marie-Tooth disease which demonstrates muscular atrophy in distal extremities, particularly manifested in peroneus muscles. In this situation, the dysfunctions of mitochondria and sarcoplasmic reticulum (SR) affect energy supply and excitation-contraction coupling of muscle fibers, therefore resulting in muscular atrophy. Although the treatment of muscular atrophy is a global urgent problem, it can be improved by electroacupuncture (EA) treatment. To investigate the mechanism underlying EA treatment improving muscular atrophy, we focused on the perspective of protein synthesis by establishing a penicillin injection-induced sciatic nerve injury model. In our model, injured rats without treatment showed decreased sciatic functional index (SFI), decreased peroneus longus muscle weight and muscle fiber cross-sectional area, aggregated mitochondria with vacuoles appearing, swollen SR, and downregulated mRNA and protein expression levels of GlyRS and myosin heavy chain IIb (MHC-IIb). The injured rats with EA treatment showed significant recovery. These results indicated that EA stimulation can alleviate peroneus longus muscular atrophy induced by iatrogenic sciatic nerve injury through promoting the recovery of GlyRS and muscle ultrastructure and increasing muscle protein synthesis. PMID:27274754

  12. Experiment K-7-18: Effects of Spaceflight in the Muscle Adductor Longus of Rats Flown in the Soviet Biosatellite Cosmos 2044. Part 2; Quantitative Autoradiographic Analysis of Gaba (Benzodiazepine) and Muscarinic (Cholinergic) Receptors in the Forebrain of Rats Flown on Cosmos 2044

    NASA Technical Reports Server (NTRS)

    Wu, L.; Daunton, N. G.; Krasnov, I. B.; DAmelio, F.; Hyde, T. M.; Sigworth, S. K.

    1994-01-01

    Quantitative autoradiographic analysis of receptors for GABA and acetylcholine in the forebrain of rats flown on COSMOS 2044 was undertaken as part of a joint US-Soviet study to determine the effects of microgravity on the central nervous system, and in particular on the sensory and motor portions of the forebrain. Changes in binding of these receptors in tissue from animals exposed to microgravity would provide evidence for possible changes in neural processing as a result of exposure to microgravity. Tritium-labelled diazepam and Quinuclidinyl-benzilate (QNB) were used to visualize GABA (benzodiazepine) and muscarinic (cholinergic) receptors, respectively. The density of tritium-labelled radioligands bound to various regions in the forebrain of both flight and control animals were measured from autoradiograms. Data from rats flown in space and from ground-based control animals that were not exposed to microgravity were compared.

  13. Morphology of the jaw, suspensorial, and opercle musculature of Beloniformes and related species (Teleostei: Acanthopterygii), with a special reference to the m. adductor mandibulae complex.

    PubMed

    Werneburg, Ingmar

    2015-01-01

    The taxon Beloniformes represents a heterogeneous group of teleost fishes that show an extraordinary diversity of jaw morphology. I present new anatomical descriptions of the jaw musculature in six selected beloniforms and four closely related species. A reduction of the external jaw adductor (A1) and a changed morphology of the intramandibular musculature were found in many Beloniformes. This might be correlated with the progressively reduced mobility of the upper and lower jaw bones. The needlefishes and sauries, which are characterised by extremely elongated and stiffened jaws, show several derived characters, which in combination enable the capture of fish at high velocity. The ricefishes are characterised by several derived and many plesiomorphic characters that make broad scale comparisons difficult. Soft tissue characters are highly diverse among hemiramphids and flying fishes reflecting the uncertainty about their phylogenetic position and interrelationship. The morphological findings presented herein may help to interpret future phylogenetic analyses using cranial musculature in Beloniformes.

  14. Morphology of the jaw, suspensorial, and opercle musculature of Beloniformes and related species (Teleostei: Acanthopterygii), with a special reference to the m. adductor mandibulae complex.

    PubMed

    Werneburg, Ingmar

    2015-01-01

    The taxon Beloniformes represents a heterogeneous group of teleost fishes that show an extraordinary diversity of jaw morphology. I present new anatomical descriptions of the jaw musculature in six selected beloniforms and four closely related species. A reduction of the external jaw adductor (A1) and a changed morphology of the intramandibular musculature were found in many Beloniformes. This might be correlated with the progressively reduced mobility of the upper and lower jaw bones. The needlefishes and sauries, which are characterised by extremely elongated and stiffened jaws, show several derived characters, which in combination enable the capture of fish at high velocity. The ricefishes are characterised by several derived and many plesiomorphic characters that make broad scale comparisons difficult. Soft tissue characters are highly diverse among hemiramphids and flying fishes reflecting the uncertainty about their phylogenetic position and interrelationship. The morphological findings presented herein may help to interpret future phylogenetic analyses using cranial musculature in Beloniformes. PMID:25755920

  15. Morphology of the jaw, suspensorial, and opercle musculature of Beloniformes and related species (Teleostei: Acanthopterygii), with a special reference to the m. adductor mandibulae complex

    PubMed Central

    2015-01-01

    The taxon Beloniformes represents a heterogeneous group of teleost fishes that show an extraordinary diversity of jaw morphology. I present new anatomical descriptions of the jaw musculature in six selected beloniforms and four closely related species. A reduction of the external jaw adductor (A1) and a changed morphology of the intramandibular musculature were found in many Beloniformes. This might be correlated with the progressively reduced mobility of the upper and lower jaw bones. The needlefishes and sauries, which are characterised by extremely elongated and stiffened jaws, show several derived characters, which in combination enable the capture of fish at high velocity. The ricefishes are characterised by several derived and many plesiomorphic characters that make broad scale comparisons difficult. Soft tissue characters are highly diverse among hemiramphids and flying fishes reflecting the uncertainty about their phylogenetic position and interrelationship. The morphological findings presented herein may help to interpret future phylogenetic analyses using cranial musculature in Beloniformes. PMID:25755920

  16. Evaluation of the cytotoxic effects of Cyperus longus extract, fractions and its essential oil on the PC3 and MCF7 cancer cell lines

    PubMed Central

    MEMARIANI, TOKTAM; HOSSEINI, TOKTAM; KAMALI, HOSSEIN; MOHAMMADI, AMENEH; GHORBANI, MARYAM; SHAKERI, ABDOREZA; SPANDIDOS, DEMETRIOS A.; TSATSAKIS, ARISTIDIS M.; SHAHSAVAND, SHABNAM

    2016-01-01

    Cyperus longus is one of the Iranian endemic species. However, to date, and to the best of our knowledge, there are no availale academic reports on the cytotoxicity of this plant. Thus, this study was carried out to examine the in vitro anti-proliferative and anti-apoptotic effects of Cyperus longus extract, fractions and essential oil (EO) on MCF7 and PC3 cell lines. The chemical constituents of EO were identified using gas chromatography (GC)-mass spectrometry (MS) analysis. The cells were cultured in RPMI-1640 medium and incubated with various concentrations of the plant extract and fractions. Cell viability was quantified by MTT assay following 24, 48 and 72 h of exposure to (12.5–200 µg/ml) of the methanol extract, the dichloromethane (CH2Cl2), ethyl acetate (EtOAc) and water fractions, as well as the EO of the plant. The percentage of apoptotic cells was determined using propidium iodide staining of DNA fragments by flow cytometry (sub-G1 peak). The most effective fraction in the MCF7 cell line was the CH2Cl2 fraction (IC50 after 48 h, 25.34±2.01). The EtOAc fraction (IC50 after 48 h, 35.2±2.69) and the methanol extract (IC50 after 48 h, 64.64±1.64) were also found to be effective. The IC50 values obtained for the PC3 cell line were 37.97±3.87, 51.57±3.87 and 70.33±2.36 for the CH2Cl2 fraction, the EtOAc fraction and the methanol extract, respectively. Based on these data and due to the partial polarity of the most effective fraction (the CH2Cl2 fraction), we also examined the cytotoxicity of the plant EO. The IC50 values after 48 h were 22.25±4.25 and 12.55±3.65 in the PC3 and MCF7 cell lines, respectively. DNA fragmentation assay also confirmed these data. Performing GC-MS analysis for the plant EO revealed that β-himachalene (10.81%), α-caryophyllene oxide (7.6%), irisone (4.78%), β-caryophyllene oxide (4.36%), humulene oxide (12%), viridiflorol (4.73%), aristolone (6.39%) and longiverbenone (6.04%) were the main constituents. Our results

  17. Long-term follow-up of flexor digitorum longus transfer and calcaneal osteotomy for stage II posterior tibial tendon dysfunction.

    PubMed

    Chadwick, C; Whitehouse, S L; Saxby, T S

    2015-03-01

    Flexor digitorum longus transfer and medial displacement calcaneal osteotomy is a well-recognised form of treatment for stage II posterior tibial tendon dysfunction. Although excellent short- and medium-term results have been reported, the long-term outcome is unknown. We reviewed the clinical outcome of 31 patients with a symptomatic flexible flat-foot deformity who underwent this procedure between 1994 and 1996. There were 21 women and ten men with a mean age of 54.3 years (42 to 70). The mean follow-up was 15.2 years (11.4 to 16.5). All scores improved significantly (p < 0.001). The mean American Orthopedic Foot and Ankle Society (AOFAS) score improved from 48.4 pre-operatively to 90.3 (54 to 100) at the final follow-up. The mean pain component improved from 12.3 to 35.2 (20 to 40). The mean function score improved from 35.2 to 45.6 (30 to 50). The mean visual analogue score for pain improved from 7.3 to 1.3 (0 to 6). The mean Short Form-36 physical component score was 40.6 (sd 8.9), and this showed a significant correlation with the mean AOFAS score (r = 0.68, p = 0.005). A total of 27 patients (87%) were pain free and functioning well at the final follow-up. We believe that flexor digitorum longus transfer and calcaneal osteotomy provides long-term pain relief and satisfactory function in the treatment of stage II posterior tibial tendon dysfunction. PMID:25737518

  18. ALS Association

    MedlinePlus

    ... toward a world without ALS! Walk to Defeat ALS® Walk to Defeat ALS® draws people of all ... We need your help. I Will Advocate National ALS Registry The National ALS Registry is a congressionally ...

  19. Hallucal grasping in Nycticebus coucang: further implications for the functional significance of a large peroneal process.

    PubMed

    Kingston, Amanda K; Boyer, Doug M; Patel, Biren A; Larson, Susan G; Stern, Jack T

    2010-01-01

    Euprimate grasping feet are characterized by a suite of morphological traits, including an enlarged peroneal process on the base of the first metatarsal, which serves as the insertion site of the peroneus longus muscle. In prosimians, a large process has typically been associated with a powerful hallucal grasp via the contraction of the peroneus longus to adduct the hallux. Recent electromyography (EMG) studies have documented that peroneus longus does not contribute substantially to hallucal grasping in lemurids (Boyer et al., 2007). However, non-lemurid prosimians have a I-V opposable grasp complex that is morphologically different and phylogenetically more primitive than the I-II adductor grasp complex of the lemurids previously studied. Therefore, it is possible that peroneus longus did function during grasping in early euprimates, but lost this function in large-bodied lemurids. The present study tests the hypothesis that a large peroneal process is related to powerful grasping ability in primates displaying the more primitive I-V grasp complex. We use EMG to evaluate the recruitment of peroneus longus, other crural muscles, and adductor hallucis in static and locomotor grasping activities of the slow loris (Nycticebus coucang). Results show that peroneus longus is active during grasping behaviors that require the subject to actively resist inversion of the foot, and likely contributes to a hallucal grasp in these activities. Peroneus longus activity level does not differ between grasping and power grasping activities, nor does it differ between grasping and non-grasping locomotor modes. Conversely, the digital flexors and hallucal adductor are recruited at higher levels during power grasping and grasping locomotor modes. Consequently, we reject the hypothesis that an enlarged peroneal process represents an adaptation specifically to enhance the power of the I-V grasp, but accept that the muscle likely plays a role in adducting the hallux during grasping

  20. Hallucal grasping in Nycticebus coucang: further implications for the functional significance of a large peroneal process.

    PubMed

    Kingston, Amanda K; Boyer, Doug M; Patel, Biren A; Larson, Susan G; Stern, Jack T

    2010-01-01

    Euprimate grasping feet are characterized by a suite of morphological traits, including an enlarged peroneal process on the base of the first metatarsal, which serves as the insertion site of the peroneus longus muscle. In prosimians, a large process has typically been associated with a powerful hallucal grasp via the contraction of the peroneus longus to adduct the hallux. Recent electromyography (EMG) studies have documented that peroneus longus does not contribute substantially to hallucal grasping in lemurids (Boyer et al., 2007). However, non-lemurid prosimians have a I-V opposable grasp complex that is morphologically different and phylogenetically more primitive than the I-II adductor grasp complex of the lemurids previously studied. Therefore, it is possible that peroneus longus did function during grasping in early euprimates, but lost this function in large-bodied lemurids. The present study tests the hypothesis that a large peroneal process is related to powerful grasping ability in primates displaying the more primitive I-V grasp complex. We use EMG to evaluate the recruitment of peroneus longus, other crural muscles, and adductor hallucis in static and locomotor grasping activities of the slow loris (Nycticebus coucang). Results show that peroneus longus is active during grasping behaviors that require the subject to actively resist inversion of the foot, and likely contributes to a hallucal grasp in these activities. Peroneus longus activity level does not differ between grasping and power grasping activities, nor does it differ between grasping and non-grasping locomotor modes. Conversely, the digital flexors and hallucal adductor are recruited at higher levels during power grasping and grasping locomotor modes. Consequently, we reject the hypothesis that an enlarged peroneal process represents an adaptation specifically to enhance the power of the I-V grasp, but accept that the muscle likely plays a role in adducting the hallux during grasping

  1. Femoral nerve block versus adductor canal block for postoperative pain control after anterior cruciate ligament reconstruction: A randomized controlled double blind study

    PubMed Central

    El Ahl, Mohamed Sayed

    2015-01-01

    Background: The objective of this study was to evaluate the reliability of the postoperative pain control using adductor canal block (ACB) compared that using the femoral nerve block (FNB) in patients with anterior cruciate ligament reconstructions (ACLR). Materials and methods: One hundred and twenty-eight patients who had been scheduled to patellar graft ACLR were included in this double blind study, and were randomly allocated into two groups; group ACB and group FNB (64 patients each). All patients received general anesthesia. At the end of the surgery, patients in group FNB received a FNB and those in group ACB received an ACB. The postoperative pain (visual analog scale [VAS]) and muscle weakness were assessed in the postoperative care unit and every 6 h thereafter for 24 h. The total morphine requirements were also recorded. Results: Patients in group ACB had significantly higher VAS (at 18 h and 24 h), higher morphine consumption, but significantly less quadriceps weakness than those in group FNB. Conclusion: In patients with patellar graft ACLR, the ACB can maintain a higher quadriceps power, but with lesser analgesia compared with the FNB. PMID:26240546

  2. Role and expression of cry1 in the adductor muscle of the oyster Crassostrea gigas during daily and tidal valve activity rhythms.

    PubMed

    Mat, Audrey M; Perrigault, Mickael; Massabuau, Jean-Charles; Tran, Damien

    2016-01-01

    Cryptochromes are flavin- and pterin-containing photoreceptors of the cryptochrome/photolyase family. They play critical roles in organisms, among are which light-dependent and light-independent roles in biological rhythms. The present work aimed at describing a cryptochrome gene in the oyster Crassostrea gigas by (i) a characterization and phylogenetic analysis and (ii) by studying its expression in the relationship to rhythmic valve behavior in different entrainment regimes. Cryptochrome expression was focused on the adductor muscle of the oyster, the effector of the valve behavior. The results suggest involvement of Cgcry1 in oyster rhythmicity as a sensor of environmental zeitgebers, associated with circadian rhythms and potentially to tidal activity. The characterized gene belongs to type 1 cryptochrome/insect-type cry. Additionally, Cgcry1 presented a daily oscillation under L:D entrainment, which disappeared in constant darkness. Transcript expression of Cgcry1 also oscillated at tidal frequency under tidal entrainment and in constant darkness. Finally, exposure of tidally entrained oysters to saxitoxin (STX)-producing alga Alexandrium minutum induced a dose effect response in oysters by first altering Cgcry1 expression and then the behavior of oysters with increasing concentrations of toxins. This study initiates the characterization of the molecular clock in the oyster C. gigas and its interactions with environmental zeitgebers. PMID:27246263

  3. Surgical reconstruction of posterior tibial tendon dysfunction: prospective comparison of flexor digitorum longus substitution combined with lateral column lengthening or medial displacement calcaneal osteotomy.

    PubMed

    Marks, Richard M; Long, Jason T; Ness, Mary Ellen; Khazzam, Michael; Harris, Gerald F

    2009-01-01

    Posterior tibial tendon dysfunction (PTTD) may require surgical intervention when nonoperative measures fail. Different methods of bony reconstruction may supplement tendon substitution. This study compares two types of bony procedures used to reinforce reconstruction of the posterior tibial tendon-the lateral column lengthening (LCL), and the medial displacement calcaneal osteotomy (MDCO). Twenty patients with PTTD were evaluated before and after scheduled reconstruction comprised of either flexor digitorum longus (FDL) substitution combined with MDCO (MDCO group, 14 patients) or FDL substitution with LCL fusion or osteotomy (LCL group, 6 patients). Foot/ankle kinematics and temporal-spatial parameters were analyzed using the Milwaukee Foot Model, and results were compared to a previously evaluated normal population of 25 patients. Post-operatively, both patient groups demonstrated significantly improved stride length, cadence and walking speed, as well as improved hindfoot and forefoot position in the sagittal plane. The LCL group also demonstrated greater heel inversion. All post-operative subjects revealed significant improvement in the talo-MT1 angle in the A/P and lateral planes, calcaneal pitch and medial cuneiform-MT5 height. Surgical reconstruction of PTTD with either the LCL or MDCO shows comparable improvements in gait parameters, with better heel inversion seen with the LCL, but improved 1st ray plantarflexion and varus with the MDCO. Both procedures demonstrated comparable improvements in radiographic measurements. PMID:18603429

  4. Changes in antioxidant enzymes and lipid peroxidation in extensor digitorum longus muscles of streptozotocin-diabetic rats may contribute to muscle atrophy.

    PubMed

    Nonaka, Koji; Une, S; Tatsuta, N; Ito, K; Akiyama, J

    2014-12-01

    We investigated muscle atrophy, major antioxidant enzymes and lipid peroxidation in the extensor digitorum longus (EDL, predominantly fast fibers) and soleus (predominantly slow fibers) muscle of streptozotocin-diabetic rats. Female Wistar rats were divided into a control (n = 5) and streptozotocin-induced diabetic group (n = 5). Eight weeks after diabetes induction the EDL and soleus muscles were removed and catalase (CAT), glutathione peroxidase (GPX) and superoxide dismutase activity (SOD), and thiobarbituric acid reactive substances (TBARS) levels measured. The CAT activity increased in both the EDL and soleus muscles of the diabetic rats (p < 0.01), whereas the GPX and SOD activities were increased only in the EDL muscle (p < 0.01 and p < 0.05). The TBARS levels were only increased in the EDL muscle of the diabetic rats (p < 0.01). Both muscles showed significant atrophy but the EDL muscle elicited the greatest atrophy. In conclusion, it appears that adaptive responses to oxidative stress were adequate in the soleus muscle, but not in the EDL muscle, of diabetic rats. Thus fast twitch muscle fibers may be more susceptible to oxidative stress than slow twitch muscle fibers and this may contribute to muscle atrophy under diabetic conditions.

  5. Arthroscopic Release of Flexor Hallucis Longus Tendon Sheath in Female Ballet Dancers: Dynamic Pathology, Surgical Technique, and Return to Dancing Performance.

    PubMed

    Funasaki, Hiroki; Hayashi, Hiroteru; Sakamoto, Kanako; Tsuruga, Rei; Marumo, Keishi

    2015-12-01

    Stenosing tenosynovitis of the flexor hallucis longus (FHL) tendon is known as a major overuse lesion in female dancers. We describe arthroscopic surgical techniques in relation to the dynamic pathology of the disease. Crepitus and pain on moving the great toe with the ankle in plantar flexion on preoperative examination confirm the diagnosis of FHL stenosing tenosynovitis even if the os trigonum is not evident. The ankle is approached through standard posterolateral and posteromedial portals. A 4.0-mm-diameter 30° arthroscope is used. Soft tissues around the talus are cleared with a motorized shaver and a radiofrequency device. The posterior aspects of the talus, os trigonum, and FHL tendon surrounded by the tendon sheath are visualized. The dynamic pathology of the FHL tendon is well observed on passive motion of the great toe. The prominent bone fragment of the talus is removed and the tendon sheath is cut with a retrograde knife and a motorized shaver from the superior border down to the entrance of the fibro-osseous tunnel. Arthroscopic release of the FHL tendon sheath is a useful and easy method to directly approach the dynamic pathology of FHL tenosynovitis in female ballet dancers. PMID:27284509

  6. Arthroscopic Release of Flexor Hallucis Longus Tendon Sheath in Female Ballet Dancers: Dynamic Pathology, Surgical Technique, and Return to Dancing Performance.

    PubMed

    Funasaki, Hiroki; Hayashi, Hiroteru; Sakamoto, Kanako; Tsuruga, Rei; Marumo, Keishi

    2015-12-01

    Stenosing tenosynovitis of the flexor hallucis longus (FHL) tendon is known as a major overuse lesion in female dancers. We describe arthroscopic surgical techniques in relation to the dynamic pathology of the disease. Crepitus and pain on moving the great toe with the ankle in plantar flexion on preoperative examination confirm the diagnosis of FHL stenosing tenosynovitis even if the os trigonum is not evident. The ankle is approached through standard posterolateral and posteromedial portals. A 4.0-mm-diameter 30° arthroscope is used. Soft tissues around the talus are cleared with a motorized shaver and a radiofrequency device. The posterior aspects of the talus, os trigonum, and FHL tendon surrounded by the tendon sheath are visualized. The dynamic pathology of the FHL tendon is well observed on passive motion of the great toe. The prominent bone fragment of the talus is removed and the tendon sheath is cut with a retrograde knife and a motorized shaver from the superior border down to the entrance of the fibro-osseous tunnel. Arthroscopic release of the FHL tendon sheath is a useful and easy method to directly approach the dynamic pathology of FHL tenosynovitis in female ballet dancers.

  7. Avulsion Fractures at the Base of the 2nd Metacarpal Due to the Extensor Carpi Radialis Longus Tendon: A Case Report and Review of the Literature

    PubMed Central

    Najefi, Ali; Jeyaseelan, Lucksmana; Patel, Anand; Kapoor, Akhil; Auplish, Sunil

    2016-01-01

    Introduction: Simultaneous contraction of the extensor carpi radialis longus (ECRL) with forced hyperflexion of the wrist can result in avulsion of the tendon and its bony attachment at its insertion at the dorsum of the base of the second metacarpal. This is a rare and often unreported fracture pattern. Case Presentation: We present a 31- year- old male who sustained a hyperflexion injury. He was managed surgically and had good post-operative outcomes. A literature search revealed 16 papers covering 18 cases of similar injuries. 12 were initially managed surgically and 6 were managed conservatively. Conclusions: Of the open reductions and internal fixations, 11 (92%) were successful and patients made a full recovery. Conservative management was unsuccessful in 4 cases; one patient required surgery for metacarpal boss, one patient had retraction of the tendon at one week follow up and another had weak flexion of the wrist. We recommend open reduction and internal fixation for these injuries. It may allow a faster recovery and therefore allow an earlier return to work and activity. PMID:27148501

  8. ALS - resources

    MedlinePlus

    Resources - ALS ... The following organizations are good resources for information on amyotrophic lateral sclerosis : Muscular Dystrophy Association -- mda.org/disease/amyotrophic-lateral-sclerosis National Amyotrophic Lateral Sclerosis (ALS) Registry -- ...

  9. The stretch-shortening cycle (SSC) revisited: residual force enhancement contributes to increased performance during fast SSCs of human m. adductor pollicis.

    PubMed

    Seiberl, Wolfgang; Power, Geoffrey A; Herzog, Walter; Hahn, Daniel

    2015-05-01

    The stretch-shortening cycle (SSC) occurs in most everyday movements, and is thought to provoke a performance enhancement of the musculoskeletal system. However, mechanisms of this performance enhancement remain a matter of debate. One proposed mechanism is associated with a stretch-induced increase in steady-state force, referred to as residual force enhancement (RFE). As yet, direct evidence relating RFE to increased force/work during SSCs is missing. Therefore, forces of electrically stimulated m. adductor pollicis (n = 14 subjects) were measured during and after pure stretch, pure shortening, and stretch-shortening contractions with varying shortening amplitudes. Active stretch (30°, ω = 161 ± 6°s(-1)) caused significant RFE (16%, P < 0.01), whereas active shortening (10°, 20°, and 30°; ω = 103 ± 3°s(-1), 152 ± 5°s(-1), and 170 ± 5°s(-1)) resulted in significant force depression (9-15%, P < 0.01). In contrast, after SSCs (that is when active stretch preceded active shortening) no force depression was found. Indeed for our specific case in which the shortening amplitude was only 1/3 of the lengthening amplitude, there was a remnant RFE (10%, P < 0.01) following the active shortening. This result indicates that the RFE generated during lengthening affected force depression when active lengthening was followed by active shortening. As conventional explanations, such as the storage and release of elastic energy, cannot explain the enhanced steady-state force after SSCs, it appears that the stretch-induced RFE is not immediately abolished during shortening and contributes to the increased force and work during SSCs.

  10. Alteration of excitation-contraction coupling mechanism in extensor digitorum longus muscle fibres of dystrophic mdx mouse and potential efficacy of taurine

    PubMed Central

    De Luca, Annamaria; Pierno, Sabata; Liantonio, Antonella; Cetrone, Michela; Camerino, Claudia; Simonetti, Simonetta; Papadia, Francesco; Camerino, Diana Conte

    2001-01-01

    No clear data is available about functional alterations in the calcium-dependent excitation-contraction (e-c) coupling mechanism of dystrophin-deficient muscle of mdx mice. By means of the intracellular microelectrode ‘point' voltage clamp method, we measured the voltage threshold for contraction (mechanical threshold; MT) in intact extensor digitorum longus (EDL) muscle fibres of dystrophic mdx mouse of two different ages: 8–12 weeks, during the active regeneration of hind limb muscles, and 6–8 months, when regeneration is complete. The EDL muscle fibres of 8–12-week-old wildtype animals had a more negative rheobase voltage (potential of equilibrium for contraction- and relaxation-related calcium movements) with respect to control mice of 6–8 months. However, at both ages, the EDL muscle fibres of mdx mice contracted at more negative potentials with respect to age-matched controls and had markedly slower time constants to reach the rheobase. The in vitro application of 60 mM taurine, whose normally high intracellular muscle levels play a role in e-c coupling, was without effect on 6–8-month-old wildtype EDL muscle, while it significantly ameliorated the MT of mdx mouse. HPLC determination of taurine content at 6–8 months showed a significant 140% rise of plasma taurine levels and a clear trend toward a decrease in amino acid levels in hind limb muscles, brain and heart, suggesting a tissue difficulty in retaining appropriate levels of the amino acid. The data is consistent with a permanent alteration of e-c coupling in mdx EDL muscle fibres. The alteration could be related to the proposed increase in intracellular calcium, and can be ameliorated by taurine, suggesting a potential therapeutic role of the amino acid. PMID:11226135

  11. EMG and force production of the flexor hallucis longus muscle in isometric plantarflexion and the push-off phase of walking.

    PubMed

    Péter, Annamária; Hegyi, András; Stenroth, Lauri; Finni, Taija; Cronin, Neil J

    2015-09-18

    Large forces are generated under the big toe in the push-off phase of walking. The largest flexor muscle of the big toe is the flexor hallucis longus (FHL), which likely contributes substantially to these forces. This study examined FHL function at different levels of isometric plantarflexion torque and in the push-off phase at different speeds of walking. FHL and calf muscle activity were measured with surface EMG and plantar pressure was recorded with pressure insoles. FHL activity was compared to the activity of the calf muscles. Force and impulse values were calculated under the big toe, and were compared to the entire pressed area of the insole to determine the relative contribution of big toe flexion forces to the ground reaction force. FHL activity increased with increasing plantarflexion torque level (F=2.8, P=0.024) and with increasing walking speed (F=11.608, P<0.001). No differences were observed in the relative contribution of the force under the big toe to the entire sole between different plantarflexion torque levels (F=0.836, P=0.529). On the contrary, in the push-off phase of walking, peak force under the big toe increased at a higher rate than force under the other areas of the plantar surface (F=3.801, P=0.018), implying a greater relative contribution to total force at faster speeds. Moreover, substantial differences were found between isometric plantarflexion and walking concerning FHL activity relative to that of the calf muscles, highlighting the task-dependant behaviour of FHL.

  12. A SIMULATION ANALYSIS OF THE COMBINED EFFECTS OF MUSCLE STRENGTH AND SURGICAL TENSIONING ON LATERAL PINCH FORCE FOLLOWING BRACHIORADIALIS TO FLEXOR POLLICIS LONGUS TRANSFER

    PubMed Central

    Mogk, Jeremy P.M.; Johanson, M. Elise; Hentz, Vincent R.; Saul, Katherine R.; Murray, Wendy M.

    2010-01-01

    Biomechanical simulations of tendon transfers performed following tetraplegia suggest that surgical tensioning influences clinical outcomes. However, previous studies have focused on the biomechanical properties of only the transferred muscle. We developed simulations of the tetraplegic upper limb following transfer of the brachioradialis (BR) to the flexor pollicis longus (FPL) to examine the influence of residual upper limb strength on predictions of post-operative transferred muscle function. Our simulations included the transfer, ECRB, ECRL, the three heads of the triceps, brachialis, and both heads of the biceps. Simulations were integrated with experimental data, including EMG and joint posture data collected from five individuals with tetraplegia and BR-FPL tendon transfers during maximal lateral pinch force exertions. Given a measured co-activation pattern for the non-paralyzed muscles in the tetraplegic upper limb, we computed the highest activation for the transferred BR for which neither the elbow nor the wrist flexor moment was larger than the respective joint extensor moment. In this context, the effects of surgical tensioning were evaluated by comparing the resulting pinch force produced at different muscle strength levels, including patient-specific scaling. Our simulations suggest that extensor muscle weakness in the tetraplegic limb limits the potential to augment total pinch force through surgical tensioning. Incorporating patient-specific muscle volume, EMG activity, joint posture, and strength measurements generated simulation results that were comparable to experimental results. Our study suggests that scaling models to the population of interest facilitates accurate simulation of post-operative outcomes, and carries utility for guiding and developing rehabilitation training protocols. PMID:21092963

  13. Changes in the Capillarity of the Rat Extensor Digitorum Longus Muscle 4 Weeks after Nerve Injury Studied by 2D Measurement Methods.

    PubMed

    Čebašek, Vita; Ribarič, Samo

    2016-01-01

    We have previously shown by 3D study that 2 weeks after nerve injury there was no change in the length of capillaries per muscle fibre length in rat extensor digitorum longus muscle (EDL). The primary goal of the present 2D study was to determine the capillarity of rat EDL 4 weeks after various modes of nerve injury. Additionally, we wished to calculate the same capillary/fibre parameters that were used in our 3D stereological study. EDL muscles derived from denervated (4 weeks after nerve injury), re-innervated (4 weeks after two successive nerve crushes) and age-matched controls from the beginning (CON-1) and the end (CON-2) of the experiment were analysed in two ways. Global indices of capillarity, such as capillary density (CD) and capillary/fibre (C/F) ratio, were determined by automatic analysis, local indices as the number (CAF) and the length of capillaries around individual muscle fibres (Lcap) in relation to muscle fibre size were estimated manually by tracing the muscle fibre outlines and the transversally and longitudinally cut segments of capillaries seen in 5-µm-thin muscle cross sections. Four weeks after both types of nerve injury, CD increased in comparison to the CON-2 group (p < 0.001) due to atrophied muscle fibres in denervated muscles and probably proliferation of capillaries in re-innervated ones. Higher C/F, CAF (both p < 0.001) and Lcap (p < 0.01) in re-innervated than denervated EDL confirmed this assumption. Calculated capillary/fibre parameters were comparable to our previous 3D study, which strengthens the practical value to the adapted 2D method used in this study.

  14. Lengthening osteotomy of the calcaneus and flexor digitorum longus tendon transfer in flexible flatfoot deformity improves talo-1st metatarsal-Index, clinical outcome and pedographic parameter.

    PubMed

    Richter, Martinus; Zech, Stefan

    2013-03-01

    Lengthening osteotomy of the calcaneus (LO) and flexor digitorum longus tendon (FDL) transfer to the navicular is one option for the treatment of flexible flatfoot deformity (FD). The aim of the study was to analyse the amount of correction and clinical outcome including pedographic assessment. In a prospective consecutive non-controlled clinical followup study, all patients with FD that were treated with LO and FDL from September 1st 2006 to August 31st, 2009 were included. Assessment was performed before surgery and at 2-year-followup including clinical examination (with staging of posterior tibialis insufficiency) weight bearing radiographs (Talo-1st metatarsal angles (TMT)), pedography (increased midfoot contact area and force) and Visual Analogue Scale Foot and Ankle (VAS FA). 112 feet in 102 patients were analysed (age, 57.6 (13-82), 42% male). In 12 feet (9%) wound healing delay without further surgical measures was registered. All patients achieved full weight bearing during the 7th postoperative week. Until followup, revision surgery was done in 3 patients (fusion calcaneocuboid joint (n=2), correction triple arthrodesis (n=1)). 101 feet (90%) completed 2-year-followup. TMT dorsoplantar/lateral/Index and VAS FA scores were increased, and posterior tibialis insufficiency stage, pedographic midfoot contact area and force percentage were decreased (each p<.05). All relevant parameters (stage of posterior tibialis insufficiency, TMT angles and Index, pedographic midfoot contact area and force percentage, VAS FA) were improved 2 years after LO and FDL transfer to the navicular in FD. The complication rate was low. This method allows safe and predictable correction.

  15. Changes in the Capillarity of the Rat Extensor Digitorum Longus Muscle 4 Weeks after Nerve Injury Studied by 2D Measurement Methods.

    PubMed

    Čebašek, Vita; Ribarič, Samo

    2016-01-01

    We have previously shown by 3D study that 2 weeks after nerve injury there was no change in the length of capillaries per muscle fibre length in rat extensor digitorum longus muscle (EDL). The primary goal of the present 2D study was to determine the capillarity of rat EDL 4 weeks after various modes of nerve injury. Additionally, we wished to calculate the same capillary/fibre parameters that were used in our 3D stereological study. EDL muscles derived from denervated (4 weeks after nerve injury), re-innervated (4 weeks after two successive nerve crushes) and age-matched controls from the beginning (CON-1) and the end (CON-2) of the experiment were analysed in two ways. Global indices of capillarity, such as capillary density (CD) and capillary/fibre (C/F) ratio, were determined by automatic analysis, local indices as the number (CAF) and the length of capillaries around individual muscle fibres (Lcap) in relation to muscle fibre size were estimated manually by tracing the muscle fibre outlines and the transversally and longitudinally cut segments of capillaries seen in 5-µm-thin muscle cross sections. Four weeks after both types of nerve injury, CD increased in comparison to the CON-2 group (p < 0.001) due to atrophied muscle fibres in denervated muscles and probably proliferation of capillaries in re-innervated ones. Higher C/F, CAF (both p < 0.001) and Lcap (p < 0.01) in re-innervated than denervated EDL confirmed this assumption. Calculated capillary/fibre parameters were comparable to our previous 3D study, which strengthens the practical value to the adapted 2D method used in this study. PMID:27023720

  16. Halopelagius longus sp. nov., a member of the family Halobacteriaceae isolated from a salt mine, and emended description of the genus Halopelagius.

    PubMed

    Zhang, Xin; Zhang, Wei-Yan; Shen, Ai-Hua; Huo, Ying-Yi; Zhu, Xu-Fen; Wu, Min

    2013-10-01

    A thermotolerant, extremely halophilic archaeon, BC12-B1(T), was isolated from a salt mine in Baicheng county, Xinjiang province, China. Colonies were off-white-grey. The cells stained Gram-negative, were motile and irregularly long-rod-shaped (variation in both width and length) with abundant gas vesicles. The strain was able to grow at 20-55 °C (optimum, 48 °C), at pH 6.0-8.0 (optimum, 7.0-7.3), with 1.8-6.0 M NaCl (optimum, 3.0-3.5 M) and with 0.02-2.2 M Mg(2+) (optimum, 0.1-0.2 M). Cells lysed in distilled water and the minimal NaCl concentration to prevent cell lysis was 8 % (w/v). Phylogenetic analysis based on the 16S rRNA gene sequences showed that strain BC12-B1(T) was most closely related to Halopelagius inordinatus RO5-2(T) (98.5 %) with less than 95 % sequence similarity to other described species. The genomic DNA G+C content of strain BC12-B1(T) was 64.0 mol%. The DNA-DNA hybridization value between strain BC12-B1(T) and Hpl. inordinatus RO5-2(T) was 43.6 %. The major polar lipids of strain BC12-B1(T) were phosphatidylglycerol, phosphatidylglycerol phosphate methyl ester, four glycolipids and an unknown lipid. Based on phenotypic, chemotaxonomic and genotypic characteristics, strain BC12-B1(T) represents a novel species of the genus Halopelagius, for which the name Halopelagius longus sp. nov. is proposed. The type strain is BC12-B1(T) ( = CGMCC 1.12397(T) = JCM 18758(T)). An emended description of the genus Halopelagius is also provided.

  17. Neuromuscular partitioning in the extensor carpi radialis longus and brevis based on intramuscular nerve distribution patterns: A three-dimensional modeling study.

    PubMed

    Ravichandiran, Mayoorendra; Ravichandiran, Nisanthini; Ravichandiran, Kajeandra; McKee, Nancy H; Richardson, Denyse; Oliver, Michele; Agur, Anne M

    2012-04-01

    Differential activation of specific regions within a skeletal muscle has been linked to the presence of neuromuscular compartments. However, few studies have investigated the extra- or intramuscular innervation throughout the muscle volume of extensor carpi radialis longus (ECRL) and brevis (ECRB). The aim of this study was to determine the presence of neuromuscular partitions in ECRL and ECRB based on the extra- and intramuscular innervation using three-dimensional modeling. The extra- and intramuscular nerve distribution was digitized and reconstructed in 3D in all the muscle volumes using Autodesk Maya in seven formalin embalmed cadaveric specimens (mean age, 75.7 ± 15.2 years). The intramuscular nerve distribution was modeled in all the muscle volumes. ECRL was found to have two neuromuscular compartments, superficial and deep. One branch from the radial nerve proper was found to innervate ECRL. This branch was divided into anterior and posterior branches to the superficial and deep compartments, respectively. Five innervation patterns were identified in ECRB with partitioning of the muscle belly into two, three, or four compartments, in a proximal to distal direction depending on the number of nerve branches entering the muscle belly. The ECRL and ECRB both demonstrated neuromuscular compartmentalization based on intramuscular innervation. According to the partitioning hypothesis, a muscle may be differentially activated depending on the required function of the muscle, thus allowing multifunctional muscles to contribute to a variety of movements. Therefore, the increased number of neuromuscular partitions in ECRB when compared with ECRL could be due to the need for more differential recruitment in the ECRB depending on force requirements.

  18. Al Composites

    NASA Astrophysics Data System (ADS)

    Chandanayaka, Tharaka; Azarmi, Fardad

    2014-05-01

    In the present study, cold spraying technique was used to fabricate a metal matrix composite (MMC) that consists of Ni matrix and 20 vol.% Ni3Al particles at two different particle sizes as reinforcement. This study intends to investigate the effect of reinforcement particle size on microstructural and mechanical properties of cold sprayed MMCs. Two different Ni3Al powders with nominal particle size of -45 to +5 and +45 to 100 μm were used as reinforcement in this study. Cold sprayed Ni-Ni3Al samples were subjected to the microstructural observation and characterization prior to any mechanical testing. Then, samples were tested using nano-indentation, Knoop hardness, Vickers hardness, and Resonance frequency to evaluate their mechanical properties. No significant changes were observed in microstructural characteristics due to different particle sizes. The results obtained from a variety of mechanical testings indicated that the increasing reinforcement particle size resulted in the slight reduction of mechanical properties such as elastic modulus and hardness in cold sprayed MMCs. The mechanical interlock between deposited particles defines the bonding strength in cold sprayed samples. Small size particles have a higher velocity and impact resulting in stronger interlock between deformed particles.

  19. Flexor Carpi Radialis to Palmaris Longus Tendon Transfer for Spontaneous Rupture of the Flexor Carpi Radialis Tendon-A Review of an Uncommon Finding and Surgical Technique for Operative Correction.

    PubMed

    Shearin, Jonathan Winkworth; Walters, Brian; Yang, S Steven

    2016-10-01

    Spontaneous ruptures of the flexor carpi radialis tendon (FCR) are rare and associated with systemic inflammatory diseases, localized tendinopathy related to scaphotrapezial-trapezoidal arthritis, or chronic immunosuppression from corticosteroids. While most cases do not require operative intervention, some patients develop weakness, impaired range of motion, and persistent pain. Previously reported surgical options include synovectomy, tendon stump resection, and osteophyte removal. We describe a surgical technique for patients with persistent symptomatology following FCR rupture in which the FCR is transposed end-to-side to the palmaris longus tendon. Three cases using this technique are presented with follow-up of 4-9 months that were collected at Lenox Hill Hospital. All three patients did well regarding specific outcome measures: grip strength, range of motion, and functional activity. FCR transfer to palmaris is an alternative to other surgical options for the spontaneous rupture of the FCR tendon in patients who remain symptomatic despite a course of non-operative therapy. PMID:27595965

  20. Muscle sarcomere lesions and thrombosis after spaceflight and suspension unloading

    SciTech Connect

    Riley, D.A.; Ellis, S.; Giometti, C.S.; Hoh, J.F.Y.; Ilyina-Kakueva, E.I.; Oganov, V.S.; Slocum, G.R.; Bain, J.L.W.; Sedlak, F.R. )

    1992-08-01

    Extended exposure of humans to spaceflight produces a progressive loss of skeletal muscle strength. This process must be understood to design effective countermeasures. The present investigation examined hindlimb muscles from flight rats killed as close to landing as possible. Spaceflight and tail suspension-hindlimb unloading (unloaded) produced significant decreases in fiber cross-sectional areas of the adductor longus (AL), a slow-twitch antigravity muscle. However, the mean wet weight of the flight AL muscles was near normal, whereas that of the suspension unloaded AL muscles was significantly reduced. Interstitial edema within the flight AL, but not in the unloaded AL, appeared to account for this apparent disagreement.In both conditions, the slow-twitch oxidative fibers atrophied more than the fast-twitch oxidative-glycolytic fibers. Microcirculation was also compromised by spaceflight, such that there was increased formation of thrombi in the postcapillary venules and capillaries.

  1. Determining physiological cross-sectional area of extensor carpi radialis longus and brevis as a whole and by regions using 3D computer muscle models created from digitized fiber bundle data.

    PubMed

    Ravichandiran, Kajeandra; Ravichandiran, Mayoorendra; Oliver, Michele L; Singh, Karan S; McKee, Nancy H; Agur, Anne M R

    2009-09-01

    Architectural parameters and physiological cross-sectional area (PCSA) are important determinants of muscle function. Extensor carpi radialis longus (ECRL) and brevis (ECRB) are used in muscle transfers; however, their regional architectural differences have not been investigated. The aim of this study is to develop computational algorithms to quantify and compare architectural parameters (fiber bundle length, pennation angle, and volume) and PCSA of ECRL and ECRB. Fiber bundles distributed throughout the volume of ECRL (75+/-20) and ECRB (110+/-30) were digitized in eight formalin embalmed cadaveric specimens. The digitized data was reconstructed in Autodesk Maya with computational algorithms implemented in Python. The mean PCSA and fiber bundle length were significantly different between ECRL and ECRB (p < or = 0.05). Superficial ECRL had significantly longer fiber bundle length than the deep region, whereas the PCSA of superficial ECRB was significantly larger than the deep region. The regional quantification of architectural parameters and PCSA provides a framework for the exploration of partial tendon transfers of ECRL and ECRB.

  2. Skeletal muscle fiber, nerve, and blood vessel breakdown in space-flown rats

    NASA Technical Reports Server (NTRS)

    Riley, D. A.; Ilyina-Kakueva, E. I.; Ellis, S.; Bain, J. L.; Slocum, G. R.; Sedlak, F. R.

    1990-01-01

    Histochemical and ultrastructural analyses were performed postflight on hind limb skeletal muscles of rats orbited for 12.5 days aboard the unmanned Cosmos 1887 biosatellite and returned to Earth 2 days before sacrifice. The antigravity adductor longus (AL), soleus, and plantaris muscles atrophied more than the non-weight-bearing extensor digitorum longus, and slow muscle fibers were more atrophic than fast fibers. Muscle fiber segmental necrosis occurred selectively in the AL and soleus muscles; primarily, macrophages and neutrophils infiltrated and phagocytosed cellular debris. Granule-rich mast cells were diminished in flight AL muscles compared with controls, indicating the mast cell secretion contributed to interstitial tissue edema. Increased ubiquitination of disrupted myofibrils implicated ubiquitin in myofilament degradation. Mitochondrial content and succinic dehydrogenase activity were normal, except for subsarcolemmal decreases. Myofibrillar ATPase activity of flight AL muscle fibers shifted toward the fast type. Absence of capillaries and extravasation of red blood cells indicated failed microcirculation. Muscle fiber regeneration from activated satellite cells was detected. About 17% of the flight AL end plates exhibited total or partial denervation. Thus, skeletal muscle weakness associated with spaceflight can result from muscle fiber atrophy and segmental necrosis, partial motor denervation, and disruption of the microcirculation.

  3. Effect of hindlimb suspension and clenbuterol treatment on polyamine levels in skeletal muscle

    NASA Technical Reports Server (NTRS)

    Abukhalaf, Imad K.; von Deutsch, Daniel A.; Wineski, Lawrence E.; Silvestrov, Natalia A.; Abera, Saare A.; Sahlu, Sinafikish W.; Potter, David E.; Thierry-Palmer, M. (Principal Investigator)

    2002-01-01

    Polyamines are unbiquitous, naturally occurring small aliphatic, polycationic, endogenous compounds. They are involved in many cellular processes and may serve as secondary or tertiary messengers to hormonal regulation. The relationship of polyamines and skeletal muscle mass of adductor longus, extensor digitorum longus, and gastrocnemius under unloading (hindlimb suspension) conditions was investigated. Unloading significantly affected skeletal muscle polyamine levels in a fiber-type-specific fashion. Under loading conditions, clenbuterol treatment increased all polyamine levels, whereas under unloading conditions, only the spermidine levels were consistently increased. Unloading attenuated the anabolic effects of clenbuterol in predominately slow-twitch muscles (adductor longus), but had little impact on clenbuterol's action as a countermeasure in fast- twitch muscles such as the extensor digitorum longus. Spermidine appeared to be the primary polyamine involved in skeletal muscle atrophy/hypertrophy. Copyright 2002 S. Karger AG, Basel.

  4. Interactive effects of growth hormone and exercise on muscle mass in suspended rats

    NASA Technical Reports Server (NTRS)

    Grindeland, Richard E.; Roy, Roland R.; Edgerton, V. Reggie; Grossman, Elena J.; Mukku, Venkat R.; Jiang, Bian; Pierotti, David J.; Rudolph, Ingrid

    1994-01-01

    Measures to attenuate muscle atrophy in rats in response to simulated microgravity (hindlimb suspension (HS)) have been only partially successful. In the present study, hypophysectomized rats were in HS for 7 days, and the effects of recombinant human growth hormone (GH), exercise (Ex), or GH+Ex on the weights, protein concentrations, and fiber cross-sectional areas (CSAs) of hindlimb muscles were determined. The weights of four extensor muscles, i.e., the soleus (Sol), medial (MG) and lateral (LG) gastrocnemius, and plantaris (Plt), and one adductor, i.e., the adductor longus (AL), were decreased by 10-22% after HS. Fiber CSAs were decreased by 34% in the Sol and by 1 17% in the MG after HS. In contrast, two flexors, i.e., the tibialis anterior (TA) and extensor digitorum longus (EDL), did not atrophy. In HS rats, GH treatment alone maintained the weights of the fast extensors (MG, LG, Plt) and flexors (TA, EDL) at or above those of control rats. This effect was not observed in the slow extensor (Sol) or AL. Exercise had no significant effect on the weight of any muscle in HS rats. A combination of GH and Ex treatments yielded a significant increase in the weights of the fast extensors and in the CSA of both fast and slow fibers of the MG and significantly increased Sol weight and CSA of the slow fibers of the Sol. The AL was not responsive to either GH or Ex treatments. Protein concentrations of the Sol and MG were higher only in the Sol of Ex and GH+Ex rats. These results suggest that while GH treatment or intermittent high intensity exercise alone have a minimal effect in maintaining the mass of unloaded muscle, there is a strong interactive effect of these two treatments.

  5. [Environmental factors in ALS].

    PubMed

    Juntas-Morales, Raul; Pageot, Nicolas; Corcia, Philippe; Camu, William

    2014-05-01

    ALS is likely to be a disorder of multifactorial origin. Among all the factors that may increase the risk of ALS, environmental ones are being studied for many years, but in the recent years, several advances have pointed to a new interest in their potential involvement in the disease process, especially for the cyanotoxin BMAA. Food containing BMAA has been found on Guam, a well-known focus of ALS/parkinsonism/dementia and high levels of BMAA have been identified into the brain of these patients. The BMAA cyanotoxin is potentially ubiquitous and have also been found into the food of patients who died from ALS both in Europe and USA. BMAA can be wrongly integrated into the protein structure during mRNA traduction, competing with serine. This may induce abnormal protein folding and a subsequent cell death. Heavy metals, such as lead or mercury may be directly toxic for neuronal cells. Several works have suggested an increased risk of ALS in individuals chronically exposed to these metals. Exposure to pesticides has been suggested to be linked to an increased risk of developing ALS. The mechanism of their toxicity is likely to be mediated by paraoxonases. These proteins are in charge of detoxifying the organism from toxins, and particularly organophosphates. To date, there are insufficient scientific data to suggest that exposure to electromagnetic fields may increase the risk of having ALS. We are particularly missing longitudinal cohorts to demonstrate that risk.

  6. Amyotrophic Lateral Sclerosis (ALS)

    MedlinePlus

    ... Pictures of ALS Mutant Proteins Support Two Major Theories About How the Disease is Caused May 2003 ... All NINDS-prepared information is in the public domain and may be freely copied. Credit to the ...

  7. Genetic Testing for ALS

    MedlinePlus

    ... Involved Donate Familial Amyotrophic Lateral Sclerosis (FALS) and Genetic Testing By Deborah Hartzfeld, MS, CGC, Certified Genetic ... guarantee a person will develop symptoms of ALS. Genetic Counseling If there is more than one person ...

  8. All About ALS

    MedlinePlus

    ... External link, please review our exit disclaimer . Subscribe All About ALS Understanding a Devastating Disorder In the ... a coffee pot, or button a shirt. Eventually, all muscles under voluntary control are affected, and people ...

  9. What Is ALS?

    MedlinePlus

    ... scarring or hardening ("sclerosis") in the region. Motor neurons reach from the brain to the spinal cord ... the body. The progressive degeneration of the motor neurons in ALS eventually leads to their demise. When ...

  10. Extensive genetics of ALS

    PubMed Central

    Calvo, Andrea; Mazzini, Letizia; Cantello, Roberto; Mora, Gabriele; Moglia, Cristina; Corrado, Lucia; D'Alfonso, Sandra; Majounie, Elisa; Renton, Alan; Pisano, Fabrizio; Ossola, Irene; Brunetti, Maura; Traynor, Bryan J.; Restagno, Gabriella

    2012-01-01

    Objective: To assess the frequency and clinical characteristics of patients with mutations of major amyotrophic lateral sclerosis (ALS) genes in a prospectively ascertained, population-based epidemiologic series of cases. Methods: The study population includes all ALS cases diagnosed in Piemonte, Italy, from January 2007 to June 2011. Mutations of SOD1, TARDBP, ANG, FUS, OPTN, and C9ORF72 have been assessed. Results: Out of the 475 patients included in the study, 51 (10.7%) carried a mutation of an ALS-related gene (C9ORF72, 32; SOD1, 10; TARDBP, 7; FUS, 1; OPTN, 1; ANG, none). A positive family history for ALS or frontotemporal dementia (FTD) was found in 46 (9.7%) patients. Thirty-one (67.4%) of the 46 familial cases and 20 (4.7%) of the 429 sporadic cases had a genetic mutation. According to logistic regression modeling, besides a positive family history for ALS or FTD, the chance to carry a genetic mutation was related to the presence of comorbid FTD (odds ratio 3.5; p = 0.001), and age at onset ≤54 years (odds ratio 1.79; p = 0.012). Conclusions: We have found that ∼11% of patients with ALS carry a genetic mutation, with C9ORF72 being the commonest genetic alteration. Comorbid FTD or a young age at onset are strong indicators of a possible genetic origin of the disease. PMID:23100398

  11. Restoration of pinch in intrinsic muscles of the hand.

    PubMed

    Lee, Steve K; Wisser, Jamie R

    2012-02-01

    The primary intrinsic muscles responsible for key and tip pinch are the adductor pollicis, first dorsal interosseous and flexor pollicis brevis muscles. Numerous conditions can lead to their dysfunction. Non-operative treatment consists of exercises of the compensating extensor pollicis longus and flexor pollicis longus muscles and use of adaptive devices, such as larger grips. Operative treatments include tendon transfers and joint fusions. The most common tendon transfer procedures include transfering of the extensor carpi radialis brevis to the adductor pollicis muscle or transfering of the abductor pollicis longus to the first dorsal interosseous muscle. Both require use of extension tendon grafts. In cases of joint instability or arthrosis, arthrodesis of the thumb and index finger MP or IP joints, alone or in combination, may be indicated. PMID:22117923

  12. ALS superbend magnet system

    SciTech Connect

    Zbasnik, J.; Wang, S.T.; Chen, J.Y.; DeVries, G.J.; DeMarco, R.; Fahmie, M.; Geyer, A.; Green, M.A.; Harkins, J.; Henderson, T.; Hinkson, J.; Hoyer, E.H.; Krupnick, J.; Marks, S.; Ottens, F.; Paterson, J.A.; Pipersky, P.; Portmann, G.; Robin, D.A.; Schlueter, R.D.; Steier, C.; Taylor, C.E.; Wahrer, R.

    2000-09-15

    The Lawrence Berkeley National Laboratory is preparing to upgrade the Advanced Light Source (ALS) with three superconducting dipoles (Superbends). In this paper we present the final magnet system design which incorporates R&D test results and addresses the ALS operational concerns of alignment, availability, and economy. The design incorporates conduction-cooled Nb-Ti windings and HTS current leads, epoxy-glass suspension straps, and a Gifford-McMahon cryocooler to supply steady state refrigeration. We also present the current status of fabrication and testing.

  13. Modulus measurements in ordered Co-Al, Fe-Al, and Ni-Al alloys

    NASA Technical Reports Server (NTRS)

    Harmouche, M. R.; Wolfenden, A.

    1985-01-01

    The composition and/or temperature dependence of the dynamic Young's modulus for the ordered B2 Co-Al, Fe-Al, and Ni-Al aluminides has been investigated using the piezoelectric ultrasonic composite oscillator technique (PUCOT). The modulus has been measured in the composition interval 48.49 to 52.58 at. pct Co, 50.87 to 60.2 at. pct Fe, and 49.22 to 55.95 at. pct Ni for Co-Al, Fe-Al, and Ni-Al, respectively. The measured values for Co-Al are in the temperature interval 300 to 1300 K, while those for the other systems are for ambient temperature only. The data points show that Co-Al is stiffer than Fe-Al, which is stiffer than Ni-Al. The data points for Fe-Al and Ni-Al are slightly higher than those reported in the literature.

  14. Al Shanker Remembers.

    ERIC Educational Resources Information Center

    American Educator, 2000

    2000-01-01

    In a 1996 interview shortly before his death, Al Shanker, longtime president of the American Federation of Teachers, discussed such topics as: his own educational experiences; how he learned about political fighting in the Boy Scouts; the appeal of socialism; multinational corporations and the nation state; teaching tough students; and John Dewey…

  15. Fosetyl-al

    Integrated Risk Information System (IRIS)

    Fosetyl - al ; CASRN 39148 - 24 - 8 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Ef

  16. ALS renewal moves forward

    NASA Astrophysics Data System (ADS)

    Falcone, R. W.; Feinberg, B.; Hussain, Z.; Kirz, J.; Krebs, G. F.; Padmore, H. A.; Robin, D. S.; Robinson, A. L.

    2007-11-01

    As the result of an extensive long-term planning process involving all its stakeholders—management, staff, and users—the ALS has seen its future and is aggressively moving ahead to implement its vision for keeping the facility at the cutting edge for the next 2-3 decades. The evolving strategic plan now in place aims to renew the ALS so it can address a new generation of fundamental questions about size dependent and dimensional-confinement phenomena at the nanoscale; correlation and complexity in physical, biological, and environmental systems; and temporal evolution, assembly, dynamics and ultrafast phenomena. The renewal spans three areas: (1) increased staffing at beamlines to support the growing user community and safety professionals to keep an increasingly complex facility hazard free; (2) implementing advances in accelerator, insertion device, beamline, and detector technology that will make it possible for ALS users to address emerging grand scientific and technological challenges with incisive world-class tools; and (3) construction of a user support building and guest housing that will increase the safety and user friendliness of the ALS by providing users office, meeting, experiment staging, and laboratory space for their work and on-site accommodations at reasonable rates.

  17. [Spasm of the adductor muscles, pre-dislocations and dislocations of the hip joints in children and adolescents with cerebral palsy. Clinical observations on aetiology, pathogenesis, therapy and rehabilitation. Part II. The importance of the iliopsoas tendon, its tenotomy, of the coxa valga antetorta, and correction through osteotomy turning the hip into varus (author's transl)].

    PubMed

    Fettweis, E

    1979-02-01

    The following factors besides spasm and contraction of the adductor muscles contribute to the occurrence of dislocations of the hip in spastic paralysis: Spasm and contraction of the iliopsoas muscle and enhanced valgus position and antetorsion. The author holds the opinion that in case of malformation of the proximal end of the femur, it is not only the indirect action of the spastic musculature via the proximal femur-epiphyseal cartilage which is responsible for this phenomen in accordance with the law on functional adaption through longitudinal growth (Pauwels), but also the direct traction of the iliopsoas tendon. A clue in this direction is the often very pronounced elongation or enlargement of the trochanter minor. The author demonstrates the pathogenetic importance of iliopsoas contracture and malpositioning of the neck of the femur by means of analyses of the course in two patients. The following principles of treatment are postulated for spastic dislocation of the hip: Elimination of the pathogenetic factors through myotenotomy of the adductor muscles and complete resection of the obturator nerve, with observation of strict aftertreatment criteria, tenotomy of the iliopsoas, repositioning and osteotomy with turning into varus. Osteotomy without previous elimination of the pathogenetically acting muscular forces does not appear useful. Likewise, permanent re-positioning by means of muscle-relaxing operation cannot be sufficiently safe-guarded without additional osteotomy once the dislocation has taken place. In twelve patients with spastic dislocation of the hip, treated in accordance with these guidelines (two without osteotomy) aged 6 6/12 and 19 5/12 years, a roentgenologically good result was obtained in half of the cases, whereas the functional result was satisfactory not only with these patients but also with part of the other patients. If surgical treatment is instituted early enough, and if the experiences described here are taken into consideration

  18. Ausbildung als zentrale Aufgabe

    NASA Astrophysics Data System (ADS)

    Krämer, Walter; Schmerbach, Sibylle

    Anders als Lesen und Schreiben zählen Grundkenntnisse in Statistik heute noch nicht zu den Voraussetzungen einer sinnvollen Teilhabe am Sozialgeschehen. Und auch in der akademischen Statistik-Ausbildung gibt es noch einiges zu tun. Das vorliegende Kapitel zeichnet die Geschichte dieser akademischen Ausbildung an deutschen Universitäten nach dem zweiten Weltkrieg nach, stellt aktuelle Defizite vor und weist auf mögliche Verbesserungen hin.

  19. AL Amyloidosis and Agent Orange

    MedlinePlus

    ... for survivors' benefits . Research on AL amyloidosis and herbicides The Health and Medicine Division (formally known as ... to the compounds of interest found in the herbicide Agent Orange and AL amyloidosis." VA made a ...

  20. Modeling neuronal vulnerability in ALS.

    PubMed

    Roselli, Francesco; Caroni, Pico

    2014-08-20

    Using computational models of motor neuron ion fluxes, firing properties, and energy requirements, Le Masson et al. (2014) reveal how local imbalances in energy homeostasis may self-amplify and contribute to neurodegeneration in ALS.

  1. Al Jazirah, Sudan

    NASA Technical Reports Server (NTRS)

    2008-01-01

    Al Jazirah (also Gezira) is one of the 26 states of Sudan. The state lies between the Blue Nile and the White Nile in the east-central region of the country. It is a well populated area suitable for agriculture. The area was at the southern end of Nubia and little is known about its ancient history and only limited archaeological work has been conducted in this area. The region has benefited from the Gezira Scheme, a program to foster cotton farming begun in 1925. At that time the Sennar Dam and numerous irrigation canals were built. Al Jazirah became the Sudan's major agricultural region with more than 2.5 million acres (10,000 km) under cultivation. The initial development project was semi-private, but the government nationalized it in 1950. Cotton production increased in the 1970s but by the 1990s increased wheat production has supplanted a third of the land formerly seeded with cotton.

    The image was acquired December 25, 2006, covers an area of 56 x 36.4 km, and is located near 14.5 degrees north latitude, 33.1 degrees east longitude.

    The U.S. science team is located at NASA's Jet Propulsion Laboratory, Pasadena, Calif. The Terra mission is part of NASA's Science Mission Directorate.

  2. ALS Performance Summary - Update

    SciTech Connect

    Waters, A M; Brown, W D; Martz, Jr., H E

    2004-09-30

    High Energy Density Physics (HEDP) experiments play an important role in corroborating the improved physics codes that underlie LLNL's Stockpile Stewardship mission. Conducting these experiments, whether on the National Ignition Facility (NIF) or another national facility such as Omega, will require not only improvement in the diagnostics for measuring the experiment, but also detailed knowledge of the as-built target components and assemblies themselves. To assist in this effort, a defined set of well-known reference standards designed to represent a range of HEDP targets have been built and are being used to quantify the performance of different characterization techniques [Hibbard, et al. 2004]. Without the critical step of using reference standards for qualifying characterization tools there can be no verification of either commercial or internally-developed characterization techniques and thus an uncertainty in the input to the physics code models would exist.

  3. Theoretical studies of AlF, AlCl, and AlBr

    NASA Technical Reports Server (NTRS)

    Langhoff, Stephen R.; Bauschlicher, Charles W., Jr.; Taylor, Peter R.

    1988-01-01

    Spectroscopic constants have been obtained for the lowest six singlet and lowest five triplet states of AlF and AlCl. The results suggest that the correct ordering of the triplet manifold in these molecules is: a 3Pi, b 3Sigma(+), c 3Sigma(+), d 3Pi, and e 3Delta. Radiative lifetimes have been determined for the excited states, and the A 1Pi to X 1Sigma(+) transition in AlF, AlCl, and AlBr has been examined in detail. A-X transition moment functions, Einstein coefficients, and A 1Pi vibrational lifetimes have been obtained for AlF and AlCl.

  4. Experiment K-6-09. Morphological and biochemical investigation of microgravity-induced nerve and muscle breakdown. Part 1: Investigation of nerve and muscle breakdown during spaceflight; Part 2: Biochemical analysis of EDL and PLT muscles

    NASA Technical Reports Server (NTRS)

    Riley, D. A.; Ellis, S.; Bain, J.; Sedlak, F.; Slocum, G.; Oganov, V.

    1990-01-01

    The present findings on rat hindlimb muscles suggest that skeletal muscle weakness induced by prolonged spaceflight can result from a combination of muscle fiber atrophy, muscle fiber segmental necrosis, degeneration of motor nerve terminals and destruction of microcirculatory vessels. Damage was confined to the red adductor longus (AL) and soleus muscles. The midbelly region of the AL muscle had more segmental necrosis and edema than the ends. Macrophages and neutrophils were the major mononucleated cells infiltrating and phagocytosing the cellular debris. Toluidine blue-positive mast cells were significantly decreased in Flight AL muscles compared to controls; this indicated that degranulation of mast cells contributed to tissue edema. Increased ubiquitination of disrupted myofibrils may have promoted myofilament degradation. Overall, mitochondria content and SDH activity were normal, except for a decrease in the subsarcolemmal region. The myofibrillar ATPase activity shifted toward the fast type in the Flight AL muscles. Some of the pathological changes may have occurred or been exacerbated during the 2 day postflight period of readaptation to terrestrial gravity. While simple atrophy should be reversible by exercise, restoration of pathological changes depends upon complex processes of regeneration by stem cells. Initial signs of muscle and nerve fiber regeneration were detected. Even though regeneration proceeds on Earth, the space environment may inhibit repair and cause progressive irreversible deterioration during long term missions. Muscles obtained from Flight rats sacrificed immediately (within a few hours) after landing are needed to distinguish inflight changes from postflight readaptation.

  5. Alexandria (Al Iskandariya), Egypt

    NASA Technical Reports Server (NTRS)

    2002-01-01

    This image of Alexandria was taken by astronauts on board the International Space Station in December 2000 using an Electronic Still Camera. A wider-angle view (STS088-739-90) taken from the Space Shuttle in December 1998 is available for context. Alexandria (Al Iskandariya) occupies a T-shaped peninsula and strip of land separating the Mediterranean from Lake Mariout. Originally the town was built upon a mole (stone breakwater) called Heptastadium, which joined the island of Pharos (see referenced website, below) to the mainland. Since then sedimentary deposits have widened the mole. Since 1905, when the 370,000 Alexandrians lived in an area of about 4 sq km between the two harbors, the city (population 4 million; see referenced website, below) has grown beyond its medieval walls and now occupies an area of about 300 sq km. The Mahmudiya Canal, connecting Alexandria with the Nile, runs to the south of the city and, by a series of locks, enters the harbor of the principal port of Egypt (note ships). The reddish and ochre polygons west of Lake Mariout are salt-evaporation, chemical-storage, and water-treatment ponds within the coastal lagoon. Reference Youssef Halim and Fatma Abou Shouk, 2000, Human impacts on Alexandria's marine environment: UNESCO, Coastal Regions and Small Islands Unit (CSI), Coastal Management Sourcebooks 2 (accessed December 20, 2000) Additional photographs taken by astronauts can be viewed at NASA-JSC's Gateway to Astronaut Photography of Earth. Image ISS001-ESC-5025 provided by the Earth Sciences and Image Analysis Laboratory, Johnson Space Center.

  6. Thermal Modeling of Al-Al and Al-Steel Friction Stir Spot Welding

    NASA Astrophysics Data System (ADS)

    Jedrasiak, P.; Shercliff, H. R.; Reilly, A.; McShane, G. J.; Chen, Y. C.; Wang, L.; Robson, J.; Prangnell, P.

    2016-07-01

    This paper presents a finite element thermal model for similar and dissimilar alloy friction stir spot welding (FSSW). The model is calibrated and validated using instrumented lap joints in Al-Al and Al-Fe automotive sheet alloys. The model successfully predicts the thermal histories for a range of process conditions. The resulting temperature histories are used to predict the growth of intermetallic phases at the interface in Al-Fe welds. Temperature predictions were used to study the evolution of hardness of a precipitation-hardened aluminum alloy during post-weld aging after FSSW.

  7. Thermal Modeling of Al-Al and Al-Steel Friction Stir Spot Welding

    NASA Astrophysics Data System (ADS)

    Jedrasiak, P.; Shercliff, H. R.; Reilly, A.; McShane, G. J.; Chen, Y. C.; Wang, L.; Robson, J.; Prangnell, P.

    2016-09-01

    This paper presents a finite element thermal model for similar and dissimilar alloy friction stir spot welding (FSSW). The model is calibrated and validated using instrumented lap joints in Al-Al and Al-Fe automotive sheet alloys. The model successfully predicts the thermal histories for a range of process conditions. The resulting temperature histories are used to predict the growth of intermetallic phases at the interface in Al-Fe welds. Temperature predictions were used to study the evolution of hardness of a precipitation-hardened aluminum alloy during post-weld aging after FSSW.

  8. Philosophieren als Unterrichtsprinzip im Mathematikunterricht

    NASA Astrophysics Data System (ADS)

    Meerwaldt, Diana

    Philosophieren und Mathematik scheinen zunächst gegensätzliche Bereiche zu sein, die sich kaum vereinbaren lassen. Dies trifft für eine Auffassung zu, die Philosophieren als "Gerede" disqualifiziert und Mathematik als eine reine "Formelwissenschaft" begreift. Beide Auffassungen werden den Gegenständen nicht gerecht.

  9. The Advanced Launch System (ALS)

    NASA Astrophysics Data System (ADS)

    Eldred, Charles H.

    The Advanced Launch System (ALS) is an unmanned vehicle that will achieve low hardware cost by using a reusable booster stage which flies back to the launch site, and a core stage in which the rocket engines and redundant avionics are in a module that is returned to earth and recovered for reuse. The booster's utilization of liquid propellant instead of solid propellant will help lower the consumable costs. The ALS also includes launch processing and flight control facilities, necessary support equipment, and ground- and flight-operations infrastructure. The ALS program studies show that, through the ALS, the United States can launch a major Mars initiative economically and with confidence. It is estimated that the objective ALS can be operational in the late 1990s.

  10. Quantum dots formed in InSb/AlAs and AlSb/AlAs heterostructures

    NASA Astrophysics Data System (ADS)

    Abramkin, D. S.; Rumynin, K. M.; Bakarov, A. K.; Kolotovkina, D. A.; Gutakovskii, A. K.; Shamirzaev, T. S.

    2016-06-01

    The crystal structure of new self-assembled InSb/AlAs and AlSb/AlAs quantum dots grown by molecularbeam epitaxy has been investigated by transmission electron microscopy. The theoretical calculations of the energy spectrum of the quantum dots have been supplemented by the experimental data on the steady-state and time-resolved photoluminescence spectroscopy. Deposition of 1.5 ML of InSb or AlSb on the AlAs surface carried out in the regime of atomic-layer epitaxy leads to the formation of pseudomorphically strained quantum dots composed of InAlSbAs and AlSbAs alloys, respectively. The quantum dots can have the type-I and type-II energy spectra depending on the composition of the alloy. The ground hole state in the quantum dot belongs to the heavy-hole band and the localization energy of holes is much higher than that of electrons. The ground electron state in the type-I quantum dots belongs to the indirect X XY valley of the conduction band of the alloy. The ground electron state in the type-II quantum dots belongs to the indirect X valley of the conduction band of the AlAs matrix.

  11. Medical application of 26Al

    NASA Astrophysics Data System (ADS)

    Steinhausen, C.; Gerisch, P.; Heisinger, B.; Hohl, Ch.; Kislinger, G.; Korschinek, G.; Niedermayer, M.; Nolte, E.; Dumitru, M.; Alvarez-Brückmann, M.; Schneider, M.; Ittel, T. H.

    1996-06-01

    Accelerator mass spectrometry (AMS) measurements with 26Al as tracer were performed in order to study the aluminium metabolism and anomalies in the human body and in rats. In particular, the differences between healthy volunteers and patients with renal failure were investigated. The obtained data points of 26Al in blood and urine were described by an open compartment model with three peripheral compartments. It was found that the minimum of peripheral compartments needed to describe 26Al concentrations in blood and urine over a time period of three years is at least three.

  12. In memory of Al Cameron

    NASA Astrophysics Data System (ADS)

    Cowan, John; Truran, James W.

    Al Cameron, who died recently (October 3, 2005) at 80, was one of the giants in astrophysics. His insights were profound and his interests were wide-ranging. Originally trained as a nuclear physicist, he made major contributions in a number of fields, including nuclear reactions in stars, nucleosynthesis, the abundances of the elements in the Solar System, and the origin of the Solar System and the Moon. In 1957, Cameron and, independently, Burbidge, Burbidge, Fowler and Hoyle, wrote seminal papers on nuclear astrophysics. Most of our current ideas concerning ele- ment formation in stars have followed from those two pioneering and historical works. Al also made many contributions in the field of Solar System physics. Particularly noteworthy in this regard was Cameron's work on the formation of the Moon. Al was also a good friend and mentor of young people. Al Cameron will be missed by many in the community both for his scientific contributions and for his friendship.

  13. Comparing the Thermodynamic Behaviour of Al(1)+ZrO2(s) to Al(1)+Al2O3(s)

    NASA Technical Reports Server (NTRS)

    Copland, Evan

    2004-01-01

    In an effort to better determine the thermodynamic properties of Al(g) and Al2O(g). the vapor in equilibrium with Al(l)+ZrO2(s) was compared to the vapor in equilibrium with Al(l)+Al2O3(s) over temperature range 1197-to-1509K. The comparison was made directly by Knudsen effusion-cell mass spectrometry with an instrument configured for a multiple effusion-cell vapor source (multi-cell KEMS). Second law enthalpies of vaporization of Al(g) and Al2O(g) together with activity measurements show that Al(l)+ZrO2(s) is thermodynamically equivalent to Al(l)+Al2O3(s), indicating Al(l) remained pure and Al2O3(s) was present in the ZrO2-cell. Subsequent observation of the Al(l)/ZrO2 and vapor/ZrO2 interfaces revealed a thin Al2O3-layer had formed, separating the ZrO2-cell from Al(l) and Al(g)+Al2O(g), effectively transforming it into an Al2O3 effusion-cell. This behavior agrees with recent observations made for Beta-NiAl(Pt) alloys measured in ZrO2 effusion-cell.

  14. Ab initio modeling of zincblende AlN layer in Al-AlN-TiN multilayers

    NASA Astrophysics Data System (ADS)

    Yadav, S. K.; Wang, J.; Liu, X.-Y.

    2016-06-01

    An unusual growth mechanism of metastable zincblende AlN thin film by diffusion of nitrogen atoms into Al lattice is established. Using first-principles density functional theory, we studied the possibility of thermodynamic stability of AlN as a zincblende phase due to epitaxial strains and interface effect, which fails to explain the formation of zincblende AlN. We then compared the formation energetics of rocksalt and zincblende AlN in fcc Al through direct diffusion of nitrogen atoms to Al octahedral and tetrahedral interstitials. The formation of a zincblende AlN thin film is determined to be a kinetically driven process, not a thermodynamically driven process.

  15. A Morphometric Study of the Obturator Nerve around the Obturator Foramen

    PubMed Central

    Jo, Se Yeong; Chang, Jae Chil; Bae, Hack Gun; Oh, Jae-Sang; Heo, Juneyoung

    2016-01-01

    Objective Obturator neuropathy is a rare condition. Many neurosurgeons are unfamiliar with the obturator nerve anatomy. The purpose of this study was to define obturator nerve landmarks around the obturator foramen. Methods Fourteen cadavers were studied bilaterally to measure the distances from the nerve root to relevant anatomical landmarks near the obturator nerve, including the anterior superior iliac spine (ASIS), the pubic tubercle, the inguinal ligament, the femoral artery, and the adductor longus. Results The obturator nerve exits the obturator foramen and travels infero-medially between the adductors longus and brevis. The median distances from the obturator nerve exit zone (ONEZ) to the ASIS and pubic tubercle were 114 mm and 30 mm, respectively. The median horizontal and vertical distances between the pubic tubercle and the ONEZ were 17 mm and 27 mm, respectively. The shortest median distance from the ONEZ to the inguinal ligament was 19 mm. The median inguinal ligament lengths from the ASIS and the median pubic tubercle to the shortest point were 103 mm and 24 mm, respectively. The median obturator nerve lengths between the ONEZ and the adductor longus and femoral artery were 41 mm and 28 mm, respectively. Conclusion The obturator nerve exits the foramen 17 mm and 27 mm on the horizontal and sagittal planes, respectively, from the pubic tubercle below the pectineus muscle. The shallowest area is approximately one-fifth medially from the inguinal ligament. This study will help improve the accuracy of obturator nerve surgeries to better establish therapeutic plans and decrease complications. PMID:27226861

  16. Comparison of lower limb muscle activation with ballet movements (releve and demi-plie) and general movements (heel rise and squat) in healthy adults

    PubMed Central

    Kim, Min-Ju; Kim, Joong-Hwi

    2016-01-01

    [Purpose] The aim of this study was to demonstrate therapeutic grounds for rehabilitation exercise approach by comparing and analyzing muscular activities of Ballet movements: the releve movement (RM) and the demi-plie movement (DM). [Methods] Four types of movements such as RM vs. heel rise (HM) and DM vs. squat movement (SM) were randomized and applied in 30 healthy male and female individuals while measuring 10-s lower limb muscular activities (gluteus maximus [GMa], gluteus medius [GMe], rectus femoris [RF], adductor longus [AL], medial gastrocnemius [MG], and lateral gastrocnemius [LG]) by using surface electromyography (EMG). [Results] Significant differences were found in GMa, GMe, AL and MG activities for DM and in all of the six muscles for RM, in particular when the two groups were compared (RM vs HM and DM vs SM). [Conclusion] The RM and DM have a greater effect on lower limb muscular force activities compared to HM and SM and could be recommended as clinical therapeutic exercises for lower limb muscle enhancement. PMID:26957762

  17. Comparison of lower limb muscle activation with ballet movements (releve and demi-plie) and general movements (heel rise and squat) in healthy adults.

    PubMed

    Kim, Min-Ju; Kim, Joong-Hwi

    2016-01-01

    [Purpose] The aim of this study was to demonstrate therapeutic grounds for rehabilitation exercise approach by comparing and analyzing muscular activities of Ballet movements: the releve movement (RM) and the demi-plie movement (DM). [Methods] Four types of movements such as RM vs. heel rise (HM) and DM vs. squat movement (SM) were randomized and applied in 30 healthy male and female individuals while measuring 10-s lower limb muscular activities (gluteus maximus [GMa], gluteus medius [GMe], rectus femoris [RF], adductor longus [AL], medial gastrocnemius [MG], and lateral gastrocnemius [LG]) by using surface electromyography (EMG). [Results] Significant differences were found in GMa, GMe, AL and MG activities for DM and in all of the six muscles for RM, in particular when the two groups were compared (RM vs HM and DM vs SM). [Conclusion] The RM and DM have a greater effect on lower limb muscular force activities compared to HM and SM and could be recommended as clinical therapeutic exercises for lower limb muscle enhancement. PMID:26957762

  18. Adductor spasmodic dysphonia: Relationships between acoustic indices and perceptual judgments

    NASA Astrophysics Data System (ADS)

    Cannito, Michael P.; Sapienza, Christine M.; Woodson, Gayle; Murry, Thomas

    2003-04-01

    This study investigated relationships between acoustical indices of spasmodic dysphonia and perceptual scaling judgments of voice attributes made by expert listeners. Audio-recordings of The Rainbow Passage were obtained from thirty one speakers with spasmodic dysphonia before and after a BOTOX injection of the vocal folds. Six temporal acoustic measures were obtained across 15 words excerpted from each reading sample, including both frequency of occurrence and percent time for (1) aperiodic phonation, (2) phonation breaks, and (3) fundamental frequency shifts. Visual analog scaling judgments were also obtained from six voice experts using an interactive computer interface to quantify four voice attributes (i.e., overall quality, roughness, brokenness, breathiness) in a carefully psychoacoustically controlled environment, using the same reading passages as stimuli. Number and percent aperiodicity and phonation breaks correlated significanly with perceived overall voice quality, roughness, and brokenness before and after the BOTOX injection. Breathiness was correlated with aperidocity only prior to injection, while roughness also correlated with frequency shifts following injection. Factor analysis reduced perceived attributes to two principal components: glottal squeezing and breathiness. The acoustic measures demonstrated a strong regression relationship with perceived glottal squeezing, but no regression relationship with breathiness was observed. Implications for an analysis of pathologic voices will be discussed.

  19. RESULTS OF ADDUCTORS MUSCLE TENOTOMY IN SPASTIC CEREBRAL PALSY

    PubMed Central

    Guglielmetti, Luiz Gabriel Betoni; Santos, Ruy Mesquita Maranhao; Mendonça, Rodrigo Góes Medea de; Yamada, Helder Henzo; Assumpçao, Rodrigo Montezuma César de; Fucs, Patricia Maria de Moraes Barros

    2015-01-01

    Objective: Radiographic evaluation of the evolution of hips that underwent soft-tissue release. Methods: This was a retrospective evaluation on 101 spastic cerebral palsy patients who underwent soft-tissue release between 1991 and 2006. Forty-four patients met the inclusion criteria: 23 boys and 21 girls; 34 diparetic and 10 quadriparetic. Functionally, 29 were non-walkers, five were able to walk at home and 10 were able to walk within the community. Reimers' index (RI) and the acetabular index (AI) were measured on pre and postoperative radiographs, with a minimum follow-up of three years. The mean age at the time of surgery was 6.4 years. Results: The results were considered good if the RI had reduced, or had increased by less than 10%. This was found in 52% of this study. We observed a clear improvement in IR, along with worse results in patients with more than five years of postoperative follow-up. Conclusion: Soft-tissue release should be performed as early as possible, regardless of age, walking condition, clinical type, RI, AI or sex, and as soon as the patient clinically presents less than 30° abduction, because of the benefits relating to walking, prevention and treatment of subluxation, hygiene and pain relief. PMID:27022574

  20. Andalusian astronomy: al-Zij al-Muqtabis of Ibn al-Kammâd.

    NASA Astrophysics Data System (ADS)

    Chabás, J.; Goldstein, B. R.

    1994-12-01

    In the twelfth century the Arabic astronomer Ibn al-Kammâd, living in Islamic Spain, composed three sets of astronomical tables, called "zijes". The zijes were largely based on the work of predecessors, going back to Ptolemy on the one hand, and Hindu astronomers on the other. None of his zijes survived in the original Arabic, but a Latin manuscript contains a translation of an apparently complete zij, the "al-Zij al-Muqtabis". This paper examines the body of astronomical knowledge contained in this zij. Specifically, it is shown that one can gain valuable information on the solar theory of the Islamic astronomers from this translation. Furthermore, the theory of lunar and solar eclipses in the work is analyzed, and tables of mean planetary and solar motions are discussed. In addition, tables for the motion of the vernal equinox, star tables, and several topics of Islamic spherical astronomy are examined.

  1. Microstructure Evolution and Mechanical Properties of Al/Al-Mg/Al composite sheet metals

    NASA Astrophysics Data System (ADS)

    Cho, Jaehyung; Kim, Su-Hyeon; Kim, Hyoung-Wook; Lim, Cha-Yong; Kim, Eun-Young; Choi, Shi-Hoon

    2011-08-01

    Two different types of aluminum alloys of AA1050 and AA5182 were used to manufacture Al/Al-Mg/Al composite sheet metals by roll bonding technology at room temperature. The composite sheet metals were annealed at 400 °C and carried out uniaxial tension tests to investigate mechanical properties. Macroscopic mechanical properties are strongly dependent on the volume (or thickness) fraction of two component layers. Microstructure and texture evolution were also investigated during roll bonding process. The AA1050 sheets located in the outer layer mainly consist of shear texture components and the AA5182 sheet located in the center layer consists of plane strain texture components. With differential speeds of the top and bottom rolls, roll bonding was also carried out. Elongation along the RD and TD was improved at a speed difference of approximately 10%-20%.

  2. Dynamic Modeling of ALS Systems

    NASA Technical Reports Server (NTRS)

    Jones, Harry

    2002-01-01

    The purpose of dynamic modeling and simulation of Advanced Life Support (ALS) systems is to help design them. Static steady state systems analysis provides basic information and is necessary to guide dynamic modeling, but static analysis is not sufficient to design and compare systems. ALS systems must respond to external input variations and internal off-nominal behavior. Buffer sizing, resupply scheduling, failure response, and control system design are aspects of dynamic system design. We develop two dynamic mass flow models and use them in simulations to evaluate systems issues, optimize designs, and make system design trades. One model is of nitrogen leakage in the space station, the other is of a waste processor failure in a regenerative life support system. Most systems analyses are concerned with optimizing the cost/benefit of a system at its nominal steady-state operating point. ALS analysis must go beyond the static steady state to include dynamic system design. All life support systems exhibit behavior that varies over time. ALS systems must respond to equipment operating cycles, repair schedules, and occasional off-nominal behavior or malfunctions. Biological components, such as bioreactors, composters, and food plant growth chambers, usually have operating cycles or other complex time behavior. Buffer sizes, material stocks, and resupply rates determine dynamic system behavior and directly affect system mass and cost. Dynamic simulation is needed to avoid the extremes of costly over-design of buffers and material reserves or system failure due to insufficient buffers and lack of stored material.

  3. Response to Pagano et al.

    PubMed

    Rezende, Flávia; Löwe, Oliver; Helfinger, Valeska; Prior, Kim-Kristin; Walter, Maria; Zukunft, Sven; Fleming, Ingrid; Weissmann, Norbert; Brandes, Ralf P; Schröder, Katrin

    2015-11-20

    In their letter, Pagano et al. appreciate the development of the Nox1, Nox2, and Nox4 triple (3N(-/-)) knockout mouse. They also agree on the view that chemiluminescence assays in general have severe limitations. However, they criticize the fact that the membrane assays in the particular study were restricted to chemiluminescence techniques. Moreover, Pagano et al. got the impression that statements concerning membrane assays of Nox activity in general were made. In addition to a lack of some technical details, Pagano et al. also found the characterization of the 3N(-/-) incomplete and some of the results to be incomprehensible. Although we are grateful for the interest of Pagano et al. in our work, we realized that basically each observation of our study was questioned. This is certainly an excessive rejection of the study in total and fails to appreciate the clear chain of evidences presented. Our work focused on chemiluminescence, and thus, any conclusions are restricted to this technique. Moreover, the 3N(-/-) mice were never developed to study the physiology of Nox enzymes, but rather to validate Nox specificity of NADPH-stimulated chemiluminescence assays. We are convinced that our findings are a valid demonstration that chemiluminescence-based assays in membrane preparations stimulated with NADPH do not measure Nox activity. This conclusion is based on both overexpression studies as well as genetic deficient mouse models. The criticisms of Pagano et al. thus might be justified in some aspects; they, however, cannot disprove the conclusions of our work. Antioxid. Redox Signal. 23, 1247-1249.

  4. Response to Pagano et al.

    PubMed

    Rezende, Flávia; Löwe, Oliver; Helfinger, Valeska; Prior, Kim-Kristin; Walter, Maria; Zukunft, Sven; Fleming, Ingrid; Weissmann, Norbert; Brandes, Ralf P; Schröder, Katrin

    2015-11-20

    In their letter, Pagano et al. appreciate the development of the Nox1, Nox2, and Nox4 triple (3N(-/-)) knockout mouse. They also agree on the view that chemiluminescence assays in general have severe limitations. However, they criticize the fact that the membrane assays in the particular study were restricted to chemiluminescence techniques. Moreover, Pagano et al. got the impression that statements concerning membrane assays of Nox activity in general were made. In addition to a lack of some technical details, Pagano et al. also found the characterization of the 3N(-/-) incomplete and some of the results to be incomprehensible. Although we are grateful for the interest of Pagano et al. in our work, we realized that basically each observation of our study was questioned. This is certainly an excessive rejection of the study in total and fails to appreciate the clear chain of evidences presented. Our work focused on chemiluminescence, and thus, any conclusions are restricted to this technique. Moreover, the 3N(-/-) mice were never developed to study the physiology of Nox enzymes, but rather to validate Nox specificity of NADPH-stimulated chemiluminescence assays. We are convinced that our findings are a valid demonstration that chemiluminescence-based assays in membrane preparations stimulated with NADPH do not measure Nox activity. This conclusion is based on both overexpression studies as well as genetic deficient mouse models. The criticisms of Pagano et al. thus might be justified in some aspects; they, however, cannot disprove the conclusions of our work. Antioxid. Redox Signal. 23, 1247-1249. PMID:26173053

  5. Large rectification magnetoresistance in nonmagnetic Al/Ge/Al heterojunctions.

    PubMed

    Zhang, Kun; Li, Huan-Huan; Grünberg, Peter; Li, Qiang; Ye, Sheng-Tao; Tian, Yu-Feng; Yan, Shi-Shen; Lin, Zhao-Jun; Kang, Shi-Shou; Chen, Yan-Xue; Liu, Guo-Lei; Mei, Liang-Mo

    2015-09-21

    Magnetoresistance and rectification are two fundamental physical properties of heterojunctions and respectively have wide applications in spintronics devices. Being different from the well known various magnetoresistance effects, here we report a brand new large magnetoresistance that can be regarded as rectification magnetoresistance: the application of a pure small sinusoidal alternating-current to the nonmagnetic Al/Ge Schottky heterojunctions can generate a significant direct-current voltage, and this rectification voltage strongly varies with the external magnetic field. We find that the rectification magnetoresistance in Al/Ge Schottky heterojunctions is as large as 250% at room temperature, which is greatly enhanced as compared with the conventional magnetoresistance of 70%. The findings of rectification magnetoresistance open the way to the new nonmagnetic Ge-based spintronics devices of large rectification magnetoresistance at ambient temperature under the alternating-current due to the simultaneous implementation of the rectification and magnetoresistance in the same devices.

  6. Thermodynamic modeling of Pt-Al and Pd-Al

    NASA Astrophysics Data System (ADS)

    Carr, Derek

    2011-03-01

    Pure platinum and pure palladium are too soft for typical jewelry applications. Adding small amounts of other metals can significantly increase their performance. However, international hallmarking standards require the alloys to be 95% pure by weight. How does one achieve significant improvements in performance adding only small amounts (5 wt-%) of other metals? Significant improvements are possible even with small additions if precipitate hardening can be induced. Using a combination of first-principles, cluster expansion, and Monte Carlo modeling, we have identified new Pt-rich/Pd-rich phases in Pt-Al and Pd-Al that should be useful in precipitate hardening. Thermodynamical modeling indicates that the phases are experimentally feasible (not kinetically inhibited).

  7. Large rectification magnetoresistance in nonmagnetic Al/Ge/Al heterojunctions

    NASA Astrophysics Data System (ADS)

    Zhang, Kun; Li, Huan-Huan; Grünberg, Peter; Li, Qiang; Ye, Sheng-Tao; Tian, Yu-Feng; Yan, Shi-Shen; Lin, Zhao-Jun; Kang, Shi-Shou; Chen, Yan-Xue; Liu, Guo-Lei; Mei, Liang-Mo

    2015-09-01

    Magnetoresistance and rectification are two fundamental physical properties of heterojunctions and respectively have wide applications in spintronics devices. Being different from the well known various magnetoresistance effects, here we report a brand new large magnetoresistance that can be regarded as rectification magnetoresistance: the application of a pure small sinusoidal alternating-current to the nonmagnetic Al/Ge Schottky heterojunctions can generate a significant direct-current voltage, and this rectification voltage strongly varies with the external magnetic field. We find that the rectification magnetoresistance in Al/Ge Schottky heterojunctions is as large as 250% at room temperature, which is greatly enhanced as compared with the conventional magnetoresistance of 70%. The findings of rectification magnetoresistance open the way to the new nonmagnetic Ge-based spintronics devices of large rectification magnetoresistance at ambient temperature under the alternating-current due to the simultaneous implementation of the rectification and magnetoresistance in the same devices.

  8. AlSb/InAs/AlSb quantum wells

    NASA Technical Reports Server (NTRS)

    Kroemer, Herbert

    1990-01-01

    Researchers studied the InAs/AlSb system recently, obtaining 12nm wide quantum wells with room temperature mobilities up to 28,000 cm(exp 2)/V center dot S and low-temperature mobilities up to 325,000 cm(exp 2)/V center dot S, both at high electron sheet concentrations in the 10(exp 12)/cm(exp 2) range (corresponding to volume concentrations in the 10(exp 18)/cm(exp 2) range). These wells were not intentionally doped; the combination of high carrier concentrations and high mobilities suggest that the electrons are due to not-intentional modulation doping by an unknown donor in the AlSb barriers, presumably a stoichiometric defect, like an antisite donor. Inasmuch as not intentionally doped bulk AlSb is semi-insulating, the donor must be a deep one, being ionized only by draining into the even deeper InAs quantum well. The excellent transport properties are confirmed by other observations, like excellent quantum Hall effect data, and the successful use of the quantum wells as superconductive weak links between Nb electrodes, with unprecendentedly high critical current densities. The system is promising for future field effect transistors (FETs), but many processing problems must first be solved. Although the researchers have achieved FETs, the results so far have not been competitive with GaAs FETs.

  9. Identification of Candida albicans ALS2 and ALS4 and Localization of Als Proteins to the Fungal Cell Surface

    PubMed Central

    Hoyer, L. L.; Payne, T. L.; Hecht, J. E.

    1998-01-01

    Additional genes in the growing ALS family of Candida albicans were isolated by PCR screening of a genomic fosmid library with primers designed from the consensus tandem-repeat sequence of ALS1. This procedure yielded fosmids encoding ALS2 and ALS4. ALS2 and ALS4 conformed to the three-domain structure of ALS genes, which consists of a central domain of tandemly repeated copies of a 108-bp motif, an upstream domain of highly conserved sequences, and a domain of divergent sequences 3′ of the tandem repeats. Alignment of five predicted Als protein sequences indicated conservation of N- and C-terminal hydrophobic regions which have the hallmarks of secretory signal sequences and glycosylphosphatidylinositol addition sites, respectively. Heterologous expression of an N-terminal fragment of Als1p in Saccharomyces cerevisiae demonstrated function of the putative signal sequence with cleavage following Ala17. This signal sequence cleavage site was conserved in the four other Als proteins analyzed, suggesting identical processing of each protein. Primary-structure features of the five Als proteins suggested a cell-surface localization, which was confirmed by indirect immunofluorescence with an anti-Als antiserum. Staining was observed on mother yeasts and germ tubes, although the intensity of staining on the mother yeast decreased with elongation of the germ tube. Similar to other ALS genes, ALS2 and ALS4 were differentially regulated. ALS4 expression was correlated with the growth phase of the culture; ALS2 expression was not observed under many different in vitro growth conditions. The data presented here demonstrate that ALS genes encode cell-surface proteins and support the conclusion that the size and number of Als proteins on the C. albicans cell surface vary with strain and growth conditions. PMID:9765564

  10. Al-Anon and recovery.

    PubMed

    Cermak, T L

    1989-01-01

    The history of Al-Anon and its current demographics are reviewed. In order to understand 12-step recovery and psychotherapy for family members of alcoholics, the concept of codependence is defined with a set of diagnostic criteria consistent with the DSM-III-R definition of personality traits and disorders. At the core of codependence are denial and an unrealistic relationship to willpower. The therapeutic implications of considering codependence as a personality disorder are explored, as are the characteristics that make codependence unique among personality disorders: the central role of denial and the existence of a self-help organization to facilitate recovery. The dynamics of working the 12 steps on codependent characteristics are outlined. A synergistic relationship between psychotherapy and the 12 steps is described. Special attention is given the emergence of Al-Anon adult children of alcoholic meetings, and the future of codependence is discussed.

  11. Emerging mechanisms of molecular pathology in ALS.

    PubMed

    Peters, Owen M; Ghasemi, Mehdi; Brown, Robert H

    2015-05-01

    Amyotrophic lateral sclerosis (ALS) is a devastating degenerative disease characterized by progressive loss of motor neurons in the motor cortex, brainstem, and spinal cord. Although defined as a motor disorder, ALS can arise concurrently with frontotemporal lobal dementia (FTLD). ALS begins focally but disseminates to cause paralysis and death. About 10% of ALS cases are caused by gene mutations, and more than 40 ALS-associated genes have been identified. While important questions about the biology of this disease remain unanswered, investigations of ALS genes have delineated pathogenic roles for (a) perturbations in protein stability and degradation, (b) altered homeostasis of critical RNA- and DNA-binding proteins, (c) impaired cytoskeleton function, and (d) non-neuronal cells as modifiers of the ALS phenotype. The rapidity of progress in ALS genetics and the subsequent acquisition of insights into the molecular biology of these genes provide grounds for optimism that meaningful therapies for ALS are attainable. PMID:25932674

  12. Synthesis of AlN/Al Polycrystals along with Al Nanoparticles Using Thermal Plasma Route

    SciTech Connect

    Kanhe, Nilesh S.; Nawale, A. B.; Kulkarni, N. V.; Bhoraskar, S. V.; Mathe, V. L.; Das, A. K.

    2011-07-15

    This paper for the first time reports the (200) oriented growth of hexagonal Aluminum nitride crystals during synthesis of aluminum nanoparticles in dc transferred arc thermal plasma reactor by gas phase condensation in nitrogen plasma. The structural and morphological study of as synthesized AlN crystal and aluminium nanoparticles was done by using the x-ray diffraction method, scanning electron microscopy and transmission electron microscopy.

  13. Ab initio modeling of zincblende AlN layer in Al-AlN-TiN multilayers

    DOE PAGES

    Yadav, S. K.; Wang, J.; Liu, X. -Y.

    2016-06-13

    An unusual growth mechanism of metastable zincblende AlN thin film by diffusion of nitrogen atoms into Al lattice is established. Using first-principles density functional theory, we studied the possibility of thermodynamic stability of AlN as a zincblende phase due to epitaxial strains and interface effect, which fails to explain the formation of zincblende AlN. We then compared the formation energetics of rocksalt and zincblende AlN in fcc Al through direct diffusion of nitrogen atoms to Al octahedral and tetrahedral interstitials. Furthermore, the formation of a zincblende AlN thin film is determined to be a kinetically driven process, not a thermodynamicallymore » driven process.« less

  14. Synthesis of Al-Al2O3 and Al-Aln Nanoparticle Composites Via Electric Explosion of Wires

    NASA Astrophysics Data System (ADS)

    Lerner, M. I.; Lozhkomoev, A. S.; Pervikov, A. V.; Bakina, O. V.

    2016-07-01

    Composite Al-Al2O3 and Al-AlN nanoparticles were synthesized via electric explosion of aluminum wires in an argon-oxygen gas mixture and in nitrogen. The parameters of electric explosion and gas medium affect the size and relative content of nitride and aluminum oxide in the nanoparticles. Processes of forming chemical compounds during aluminum oxidation at the contact surface between explosive products and gas and of nitrogen diffusions into the nanoparticles of the condensed phase are considered.

  15. NiAl-base composite containing high volume fraction of AlN for advanced engines

    NASA Technical Reports Server (NTRS)

    Hebsur, Mohan (Inventor); Whittenbeger, John D. (Inventor); Lowell, Carl F. (Inventor)

    1994-01-01

    A particulate reinforced NiAl-AlN composite alloy has a NiAl matrix and greater than about 13 volume percent fine particles of AlN within the matrix. The particles preferably have a diameter from about 15 nanometers to about 50 nanometers. The particulate reinforced NiAl-AlN composite alloy may be prepared by cryomilling prealloyed NiAl in liquid nitrogen using grinding media having a diameter of from about 2 to 6 mm at an impeller speed of from about 450 RPM to about 800 RPM. The cryomilling may be done for a duration of from about 4 hours to about 20 hours to obtain a cryomilled powder. The cryomilled powder may be consolidated to form the particulate reinforced NiAl-AlN composite alloy. The particulate reinforced alloy can further include a toughening alloy. The toughening alloy may include NiCrAlY, FeCrAlY, and FeAl.

  16. Reply to Pachai et al.

    PubMed

    Harrison, William J; Bex, Peter J

    2016-05-01

    Peripheral vision is fundamentally limited by the spacing between objects. When asked to report a target's identity, observers make erroneous reports that sometimes match the identity of a nearby distractor and sometimes match a combination of target and distractor features. The classification of these errors has previously been used to support competing 'substitution' [1] or 'averaging' [2] models of the phenomenon known as 'visual crowding'. We recently proposed a single model in which both classes of error occur because observers make their reports by sampling from a biologically-plausible population of weighted responses within a region of space around the target [3]. It is critical to note that there is no probabilistic substitution or averaging process in our model; instead, we argue that neither substitution nor averaging occur, but that these are misclassifications of the distribution of reports that emerge when a population response distribution is sampled. This is a fundamentally different way of thinking about crowding, and on this basis we claim to have provided a mechanism unifying categorically distinct perceptual errors. Our goal was not to model all crowding phenomena, such as the release from crowding when target and flanks differ in color or depth [4]. Pachai et al.[5] have suggested that our model is not unifying because it inaccurately predicts perceptual performance for a particular stimulus. Although we agree that our model does not predict their data, this specific demonstration overlooks the critical aspect of the model: perceptual reports are drawn from a weighted population code. We show that Pachai et al.'s [5] own data actually provide evidence for the population code we have described [3], and we suggest a biologically-plausible analysis of their stimuli that provides a computational basis for their 'grouping' account of crowding. PMID:27166690

  17. Reply to Pachai et al.

    PubMed

    Harrison, William J; Bex, Peter J

    2016-05-01

    Peripheral vision is fundamentally limited by the spacing between objects. When asked to report a target's identity, observers make erroneous reports that sometimes match the identity of a nearby distractor and sometimes match a combination of target and distractor features. The classification of these errors has previously been used to support competing 'substitution' [1] or 'averaging' [2] models of the phenomenon known as 'visual crowding'. We recently proposed a single model in which both classes of error occur because observers make their reports by sampling from a biologically-plausible population of weighted responses within a region of space around the target [3]. It is critical to note that there is no probabilistic substitution or averaging process in our model; instead, we argue that neither substitution nor averaging occur, but that these are misclassifications of the distribution of reports that emerge when a population response distribution is sampled. This is a fundamentally different way of thinking about crowding, and on this basis we claim to have provided a mechanism unifying categorically distinct perceptual errors. Our goal was not to model all crowding phenomena, such as the release from crowding when target and flanks differ in color or depth [4]. Pachai et al.[5] have suggested that our model is not unifying because it inaccurately predicts perceptual performance for a particular stimulus. Although we agree that our model does not predict their data, this specific demonstration overlooks the critical aspect of the model: perceptual reports are drawn from a weighted population code. We show that Pachai et al.'s [5] own data actually provide evidence for the population code we have described [3], and we suggest a biologically-plausible analysis of their stimuli that provides a computational basis for their 'grouping' account of crowding.

  18. Everyday Life with ALS: A Practical Guide

    MedlinePlus

    ... course of ALS. ALS also will require some adaptations to your environment, both for safety and to ... the way, Chapter 6 will include information on adaptations for computer access. Though the chapter is called “ ...

  19. Effects of the Al content on pore structures of porous TieAl alloys

    SciTech Connect

    Jaing, Y; He, Y H; Xu, N P; Zou, J; Huang, B; Lui, C T

    2008-01-01

    Porous TieAl alloys with different nominal compositions were fabricated through a reactive synthesis of Ti and Al elemental powders. It has been found that the pore parameters vary with the Al contents, indicating that the nature of the pores can be manipulated through changing the Al contents. In addition, detailed structural characterizations showed that the fabricated porous TieAl alloys can have three crystalline phases (i.e., a2-Ti3Al, g-TiAl, and TiAl3) when using different compositions. The fundamental reasons behind these phenomena have been explored.

  20. Nonstoichiometry of Al-Zr intermetallic phases

    SciTech Connect

    Radmilovic, V.; Thomas, G.

    1994-06-01

    Nonstoichiometry of metastable cubic {beta}{prime} and equilibrium tetragonal {beta} Al-Zr intermetallic phases of the nominal composition Al{sub 3}Zr in Al-rich alloys has been extensively studied. It is proposed that the ``dark contrast`` of {beta}{prime} core in {beta}{prime}/{sigma}{prime} complex precipitates, in Al-Li-Zr based alloys, is caused by incorporation of Al and Li atoms into the {beta}{prime} phase on Zr sublattice sites, forming nonstoichiometric Al-Zr intermetallic phases, rather than by Li partitioning only. {beta}{prime} particles contain very small amounts of Zr, approximately 5 at.%, much less than the stoichiometric 25 at.% in the Al{sub 3}Zr metastable phase. These particles are, according to simulation of high resolution images, of the Al{sub 3}(Al{sub 0.4}Li{sub 0.4}Zr{sub 0.2}) type. Nonstoichiometric particles of average composition Al{sub 4}Zr and Al{sub 6}Zr are observed also in the binary Al-Zr alloy, even after annealing for several hours at 600{degree}C.

  1. Cenomanian-Turonian biostratigraphy of the Jardas Al Abid area, Al Jabal Al Akhdar, northeast Libya

    NASA Astrophysics Data System (ADS)

    El Qot, Gamal M.; Abdulsamad, Esam O.

    2016-09-01

    The Upper Cenomanian-Turonian succession exposed at Jardas al'Abid area consists mainly of carbonates with siliciclastic intercalations. This succession is subdivided lithostratigraphically into: Qasr al'Abid (Late Cenomanian) and Al Baniyah (Late Cenomanian-Coniacian) formations. This sequence is relatively rich in macrofossil assemblages especially bivalves, gastropods, and echinoids with rare ammonites. Based on the first occurrence (FO) and last occurrence (LO) of some index species of these macrofossil groups, an integrated biostratigraphic framework has been constructed. The studied Cenomanian-Turonian sequence is subdivided biostratigraphically into three ammonite biozones; Pseudaspidoceras pseudonodosoides Total Range Zone, Choffaticeras segne Total Range Zone, and Coilopoceras requienianum Total Range Zone. Based on the rest of macrofossil assemblages other than the ammonites, eight biozones were recognized; Mecaster batnensis Total Range Zone, Ceratostreon flabellatum-Neithea dutrugei Acme Zone, Costagyra olisiponensis Acme Zone, Pycnodonte (Phygraea) vesicularis vesiculosa Acme Zone, Mytiloides labiatus Total Range Zone = Mecaster turonensis Acme Zone, Rachiosoma rectilineatum-Curvostrea rouvillei-Tylostoma (T.) globosum Assemblage Zone, Radiolites sp.-Apricardia? matheroni Total Range Zone, and Nerinea requieniana Total Range Zone. Most of the proposed biozones are recorded for the first time from Libya. The integration among these biozones as well as local and inter-regional correlation of the biozones have been discussed. The stage boundaries of the studied stratigraphic intervals are discussed, where the Cenomanian/Turonian boundary is delineated at the last occurrence (LO) of Pseudaspidoceras pseudonodosoides (Choffat), while the Turonian/Coniacian boundary is delineated arbitrary being agree with the LO of the Turonian fauna.

  2. Cyclic oxidation resistance of a reaction milled NiAl-AlN composite

    NASA Technical Reports Server (NTRS)

    Lowell, Carl E.; Barrett, Charles A.; Whittenberger, J. D.

    1990-01-01

    Based upon recent mechanical property tests a NiAl-AlN composite produced by cryomilling has very attractive high temperature strength. This paper focuses on the oxidation resistance of the NiAl-AlN composite at 1473 and 1573 K as compared to that of Ni-47Al-0.15Zr, one of the most oxidation resistant intermetallics. The results of cyclic oxidation tests show that the NiAl-AlN composite has excellent properties although not quite as good as those of Ni-47Al-0.15Zr. The onset of failure of the NiAl-AlN was unique in that it was not accompanied by a change in scale composition from alumina to less protective oxides. Failure in the composite appears to be related to the entrapment of AlN particles within the alumina scale.

  3. Wear behavior of Al-Al{sub 3}Ti composite manufactured by a centrifugal method

    SciTech Connect

    Watanabe, Yoshimi; Yamanaka, Noboru; Fukui, Yasuyoshi

    1999-12-01

    The purpose of the present study was to develop a wear-resistant, light Al-Al{sub 3}Ti composite material. An Al-Al{sub 3}Ti composite specimen was machined from a thick-walled tube of Al-Al{sub 3}Ti functionally graded material (FGM) manufactured by the centrifugal method from a commercial ingot of Al-5 mass% Ti master alloy. The alloy was heated to a temperature where solid Al{sub 3}Ti particles resided in a liquid Al matrix, and then the centrifugal method was carried out. Al{sub 3}Ti particles in a commercial alloy ingot exist as platelets, and this shape was maintained through the casting. Three kinds of wear specimens were prepared, taking into account the morphology of the Al{sub 3}Ti particles in the thick-walled FGM tube; the Al{sub 3}Ti particles were arranged with their platelet planes nearly normal to the radial direction as a result of the applied centrifugal force. The wear resistance of the Al-Al{sub 3}Ti composite was significantly higher than that of pure Al. Wear-resistance anisotropy and dissolution of the Al{sub 3}Ti into the Al matrix at the near-surface region, around 100 {micro}m in depth, were also observed. The mechanism of the supersaturated-layer formation and the origin of the anisotropic wear resistance are discussed.

  4. Systems Engineering Techniques for ALS Decision Making

    NASA Technical Reports Server (NTRS)

    Rodriquez, Luis F.; Drysdale, Alan E.; Jones, Harry; Levri, Julie A.

    2004-01-01

    The Advanced Life Support (ALS) Metric is the predominant tool for predicting the cost of ALS systems. Metric goals for the ALS Program are daunting, requiring a threefold increase in the ALS Metric by 2010. Confounding the problem, the rate new ALS technologies reach the maturity required for consideration in the ALS Metric and the rate at which new configurations are developed is slow, limiting the search space and potentially giving the perspective of a ALS technology, the ALS Metric may remain elusive. This paper is a sequel to a paper published in the proceedings of the 2003 ICES conference entitled, "Managing to the metric: an approach to optimizing life support costs." The conclusions of that paper state that the largest contributors to the ALS Metric should be targeted by ALS researchers and management for maximum metric reductions. Certainly, these areas potentially offer large potential benefits to future ALS missions; however, the ALS Metric is not the only decision-making tool available to the community. To facilitate decision-making within the ALS community a combination of metrics should be utilized, such as the Equivalent System Mass (ESM)-based ALS metric, but also those available through techniques such as life cycle costing and faithful consideration of the sensitivity of the assumed models and data. Often a lack of data is cited as the reason why these techniques are not considered for utilization. An existing database development effort within the ALS community, known as OPIS, may provide the opportunity to collect the necessary information to enable the proposed systems analyses. A review of these additional analysis techniques is provided, focusing on the data necessary to enable these. The discussion is concluded by proposing how the data may be utilized by analysts in the future.

  5. Pubic inguinal pain syndrome: the so-called sports hernia.

    PubMed

    Cavalli, Marta; Bombini, Grazia; Campanelli, Giampiero

    2014-03-01

    The "sportsman's hernia" commonly presents as a painful groin in those sports that involve kicking and twisting movements while running, particularly in rugby, football, soccer, and ice hockey players. Moreover, sportsman's hernia can be encountered even in normally physically active people. The pain experienced is recognized at the common point of origin of the rectus abdominis muscle and the adductor longus tendon on the pubic bone and the insertion of the inguinal ligament on the pubic bone. It is accepted that this chronic pain caused by abdominal wall weakness or injury occurs without a palpable hernia. We proposed the new name "pubic inguinal pain syndrome." In the period between January 2006 and November 2013 all patients afferent in our ambulatory clinic for chronic groin pain without a clinically evident hernia were assessed with medical history, physical examination, dynamic ultrasound, and pelvic and lumbar MRI. All patients were proposed for a conservative treatment and then, if it was not effective, for a surgical treatment. Our etiopathogenetic theory is based on three factors: (1) the compression of the three nerves of the inguinal region, (2) the imbalance in strength of adductor and abdominal wall muscles caused by the hypertrophy and stiffness of the insertion of rectus muscle and adductor longus muscle, and (3) the partial weakness of the posterior wall. Our surgical procedure includes the release of all three nerves of the region, the correction of the imbalance in strength with the partial tenotomy of the rectus and adductor longus muscles, and the repair of the partial weakness of the posterior wall with a lightweight mesh. This treatment reported excellent results with complete relief of symptoms after resumption of physical activity in all cases. PMID:24526429

  6. Instandhaltungsmanagement als Gestaltungsfeld Ganzheitlicher Produktionssysteme

    NASA Astrophysics Data System (ADS)

    Dombrowski, Uwe; Schulze, Sven; Otano, Isabel Crespo

    Sich kontinuierlich verändernde Rahmenbedingungen, wie beispielsweise eine steigende Variantenvielfalt, verkürzte Produktlebenszyklen sowie Kundenforderungen nach höherer Qualität, kürzeren Lieferzeiten und geringeren Kosten, fordern von produzierenden Unternehmen eine stetige Anpassung der Prozesse, der Organisation und der Strukturen. Seit den 90er Jahren versuchen immer mehr deutsche Unternehmen diesen veränderten Anforderungen mit der Einführung eines Ganzheitlichen Produktionssystems (GPS) zu begegnen. Ganzheitliche Produktionssysteme sind dabei in ihren Grundlagen an das Toyota Produktionssystem angelehnt, vereinigen aber auch weitere Methoden zu einem unternehmensspezifischen Regelwerk. Im Rahmen des langfristigen Trends zu unternehmensindividuellen Produktionssystemen wird sowohl in der Industrie als auch in der Forschung intensiv über das Toyota Produktionssystem, Lean Production, Lean Management und Ganzheitliche Produktionssysteme diskutiert, werden Konzepte zu Implementierung und Betrieb erstellt und die Wirtschaftlichkeit untersucht.

  7. Structure and stability of the AlX and AlX{sup {minus}} species

    SciTech Connect

    Gutsev, G.L.; Jena, P.; Bartlett, R.J.

    1999-02-01

    The electronic and geometrical structures of the ground and low-lying excited states of the diatomic AlX and AlX{sup {minus}} series (X=H, Li, Be, B, C, N, O, and F) are calculated by the coupled-cluster method with all singles and doubles and noniterative inclusion of triples using a large atomic natural orbital basis. All the ground-state AlX molecules except for AlF can attach an additional electron and form ground-state AlX{sup {minus}} anions. The ground-state AlBe{sup {minus}}, AlB{sup {minus}}, AlC{sup {minus}}, AlN{sup {minus}}, and AlO{sup {minus}} anions possess excited states that are stable toward autodetachment of an extra electron; AlBe{sup {minus}} also has a second excited state. Low-lying excited states of all AlX but AlN can attach an extra electron and form anionic states that are stable with respect to their neutral (excited) parent states. The ground-state AlLi{sup {minus}}, AlBe{sup {minus}}, AlB{sup {minus}}, AlN{sup {minus}}, and AlO{sup {minus}} anions are found to be thermodynamically more stable than their neutral parents. The most stable is AlO{sup {minus}}, whose dissociation energy to Al+O{sup {minus}} is 6.4 eV. Correspondingly, AlO possesses the largest electron affinity (2.65 eV) in the series. {copyright} {ital 1999 American Institute of Physics.}

  8. Accumulation of Al in Root Mucilage of an Al-Resistant and an Al-Sensitive Cultivar of Wheat.

    PubMed Central

    Archambault, D. J.; Zhang, G.; Taylor, G. J.

    1996-01-01

    To estimate rates of Al accumulation within the symplasm, all apoplastic pools of Al need to be eliminated or accounted for. We have developed a revised kinetic protocol that allows us to estimate the contribution of mucilage-bound Al to total, nonexchangeable Al, and to eliminate the mucilage as an apoplastic pool of Al. By comparing the Al content of excised root tips (2 cm) of wheat (Triticum aestivum L.) with and without the removal of the mucilage (using a 10-min wash in 1 M NH4Cl), we found that Al bound to the mucilage accounted for approximately 25 to 35% of Al remaining after desorption in citric acid. The kinetics of Al uptake into mucilage were biphasic, with a rapid phase occurring in the first 30 min of uptake, followed by a linear phase occurring in the remainder of the experimental period (180 min). By adopting a step for removal of mucilage into our existing kinetic protocol, we have been able to isolate a linear phase of uptake with only a slight deviation from linearity in the first 5 min. Although we cannot unambiguously identify this phase of uptake as uptake into the symplasm, we believe this new protocol provides us with the most accurate quantitative estimate of symplastic Al yet available. PMID:12226458

  9. Magnetism of Al-substituted magnetite reduced from Al-hematite

    NASA Astrophysics Data System (ADS)

    Jiang, Zhaoxia; Liu, Qingsong; Zhao, Xiang; Roberts, Andrew P.; Heslop, David; Barrón, Vidal; Torrent, José

    2016-06-01

    Aluminum-substituted magnetite (Al-magnetite) reduced from Al-substituted hematite or goethite (Al-hematite or Al-goethite) is an environmentally important constituent of magnetically enhanced soils. In order to characterize the magnetic properties of Al-magnetite, two series of Al-magnetite samples were synthesized through reduction of Al-hematite by a mixed gas (80% CO2 and 20% CO) at 395°C for 72 h in a quartz tube furnace. Al-magnetite samples inherited the morphology of their parent Al-hematite samples, but only those transformed from Al-hematite synthesized at low temperature possessed surficial micropores, which originated from the release of structural water during heating. Surface micropores could thus serve as a practical fingerprint of fire or other high-temperature mineralogical alteration processes in natural environments, e.g., shear friction in seismic zones. In addition, Al substitution greatly affects the magnetic properties of Al-magnetite. For example, coercivity (Bc) increases with increasing Al content and then decreases slightly, while the saturation magnetization (Ms), Curie temperature (Tc), and Verwey transition temperature (Tv) all decrease with increasing Al content due to crystal defect formation and dilution of magnetic ions caused by Al incorporation. Moreover, different trends in the correlation between Tc and Bc can be used to discriminate titanomagnetite from Al-magnetite, which is likely to be important in environmental and paleomagnetic studies, particularly in soil.

  10. Reactive Plasma Spraying of Fine Al2O3/AlN Feedstock Powder

    NASA Astrophysics Data System (ADS)

    Shahien, Mohammed; Yamada, Motohiro; Yasui, Toshiaki; Fukumoto, Masahiro

    2013-12-01

    Reactive plasma spraying (RPS) is a promising technology for in situ formation of aluminum nitride (AlN) coatings. Recently, AlN-based coatings were fabricated by RPS of alumina (Al2O3) powder in N2/H2 thermal plasma. This study investigated the feasibility of RPS of a fine Al2O3/AlN mixture and the influence of the plasma gases (N2, H2) on the nitriding conversion, and coating microstructure and properties. Thick AlN/Al2O3 coatings with high nitride content were successfully fabricated. The coatings consist of h-AlN, c-AlN, Al5O6N, γ-Al2O3, and a small amount of α-Al2O3. Use of fine particles enhanced the nitriding conversion and the melting tendency by increasing the surface area. Furthermore, the AlN additive improved the AlN content in the coatings. Increasing the N2 gas flow rate improved the nitride content and complete crystal growth to the h-AlN phase, and enhanced the coating thickness. On the other hand, though the H2 gas is required for plasma nitriding of the Al2O3 particles, increasing its flow rate decreased the nitride content and the coating thickness. Remarkable influence of the plasma gases on the coating composition, microstructure, and properties was observed during RPS of the fine particles.

  11. 77 FR 73732 - In the Matter of Amendment of the Designation of al-Qa'ida in Iraq, aka Jam'at al Tawhid wa'al...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-11

    ... al-Rafidayn, aka The Organization of al-Jihad's Base of Operations in Iraq, aka al-Qaida of Jihad in Iraq, aka al-Qaida in Iraq, aka al-Qaida in Mesopotamia, aka al-Qaida in the Land of the Two Rivers, aka al-Qaida of the Jihad in the Land of the Two Rivers, aka al-Qaida of Jihad Organization in......

  12. A comparison of mechanical properties between Al and Al3Mg

    NASA Astrophysics Data System (ADS)

    Yang, Rong; Tang, Bin; Gao, Tao

    2016-11-01

    On the basis of first principles calculations, we have calculated the elastic properties, stress-strain relations, ideal tensile strengths, ideal shear strengths, and the ideal compressed strengths of Al and Al3Mg. The stress-strain relations of Al3Mg are strikingly similar to those of Al, indicating that the crystal structure appears to be more important than the identity of the individual atoms during uniaxial deformation. Al3Mg is found to have larger moduli and higher strengths than Al but less ductile than Al. So Al3Mg is expected to be a harder material, consistent with its exploitation in Al precipitate-hardening mechanisms. The calculated elastic properties, tensile strengths and shear strengths of Al are consistent with experimental values or previous theoretical results. We also use another method (molecular dynamics (MD) simulations) to recalculate elastic constants, ideal tensile and compressed strength of Al3Mg for checking and comparing. We find that the results obtained by the two methods agree well with each other. The failure modes under uniaxial <100> tension are also explored for Al and Al3Mg. Our calculations confirm that Al fail by shear and predict that Al3Mg also fail by shear.

  13. Influences of Al particles on the microstructure and property of electrodeposited Ni-Al composite coatings

    NASA Astrophysics Data System (ADS)

    Cai, Fei; Jiang, Chuanhai

    2014-02-01

    Ni-Al composite coatings with different contents of Al microparticles were prepared from a conventional Watt bath. The influences of Al particle loadings in the bath on the surface morphology, composition, texture, grain size, microstrain, residual stress and anti-corrosion of the Ni-Al composite coating were investigated. The friction coefficients of the coatings at 200 °C were also evaluated by a pin-on-disctribometer. The results showed that the surface morphology of the coatings changed from pyramid + colonied structure to colonied structure with increasing Al particle loadings. The (2 0 0) preferred orientation for pure Ni coating evolved to random orientation with increasing Al particle loadings. The grain size obtained the minimum value of 72.28 nm at Al particle loading of 100 g/L and the microstrain of the coating increased with increasing the Al particle loadings. The incorporation of Al particles decreased the residual stress of the electro-deposited coating and all the coatings deposited at different Al particle loadings possessed low residual stress. As the Al particle loading increased, the anti-corrosion of the Ni-Al coatings increased owing to the combined effect of increasing Al content in the coatings and the texture evolution from (2 0 0) plane to (1 1 1) plane. The wear result suggested that the increasing Al particle content did not improve the wear performance of the Ni-Al composite coatings.

  14. Interfacial phenomena in the reactions of Al-B, Al-Ti-B, and Al-Zr-B alloys with KF-AlF{sub 3} and NaF-AlF{sub 3} melts

    SciTech Connect

    Lee, M.S.; Terry, B.S.; Grieveson, P.

    1993-12-01

    The interfacial phenomena occurring during the contacting of liquid Al-B, Al-Ti-B, and Al-Zr-B melts with KF-AlF{sub 3} liquid fluxes have been investigated by optical examination of quenched metal drops previously immersed in the liquid fluxes. Reactions in the Al-B/KF-AlF{sub 3} system involve the formation of metastable AlB{sub 12} at the metal/flux interface. At high KBF{sub 4} levels in the flux, the AlB{sub 12} is dispersed in the flux and also at low KBF{sub 4} levels in the metal. Reactions in the Al-Ti-B/KF-AlF{sub 3} system involve the formation of TiB{sub 2}, which may be dispersed in either the metal or the flux depending upon the composition of the flux. The results obtained for the Al-Ti-B/NaF-AlF{sub 3} and Al-Zr-B/KF-AlF{sub 3} systems were similar to those observed for the Al-Ti-B/KF-AlF{sub 3} system.

  15. Growth and Stress-induced Transformation of Zinc blende AlN Layers in Al-AlN-TiN Multilayers

    PubMed Central

    Li, Nan; Yadav, Satyesh K.; Wang, Jian; Liu, Xiang-Yang; Misra, Amit

    2015-01-01

    AlN nanolayers in sputter deposited {111}Al/AlN/TiN multilayers exhibit the metastable zinc-blende-structure (z-AlN). Based on density function theory calculations, the growth of the z-AlN is ascribed to the kinetically and energetically favored nitridation of the deposited aluminium layer. In situ nanoindentation of the as-deposited {111}Al/AlN/TiN multilayers in a high-resolution transmission electron microscope revealed the z-AlN to wurzite AlN phase transformation through collective glide of Shockley partial dislocations on every two {111} planes of the z-AlN. PMID:26681109

  16. Growth and stress-induced transformation of zinc blende AlN layers in Al-AlN-TiN multilayers

    DOE PAGES

    Li, Nan; Yadav, Satyesh K.; Wang, Jian; Liu, Xiang -Yang; Misra, Amit

    2015-12-18

    We report that AlN nanolayers in sputter deposited {111}Al/AlN/TiN multilayers exhibit the metastable zinc-blende-structure (z-AlN). Based on density function theory calculations, the growth of the z-AlN is ascribed to the kinetically and energetically favored nitridation of the deposited aluminium layer. In situ nanoindentation of the as-deposited {111}Al/AlN/TiN multilayers in a high-resolution transmission electron microscope revealed the z-AlN to wurzite AlN phase transformation through collective glide of Shockley partial dislocations on every two {111} planes of the z-AlN.

  17. Mechanical alloying of nb-al powders

    NASA Astrophysics Data System (ADS)

    Peng, Zhixue; Suryanarayana, C.; Froes, F. H. (Sam)

    1996-01-01

    The effect of mechanical alloying (MA) on solid solubility extension, nanostructure formation, amorphization, intermetallic compound formation, and the occurrence of a face-centered cubic (fcc) phase in the Nb-Al system has been studied. Solid solubility extension was observed in both the terminal compositions and intermetallic compounds: 15 pct Nb in Al and 60 pct Al in Nb, well beyond the equilibrium and even rapid solidification levels (2.4 pct Nb and 25 pct Al, respectively) and increased homogeneity range for the NbAl3 phase. Nanostructured grains formed in all compositions. In the central part of the phase diagram, amorphization occurred predominantly. Only NbAl3, the most stable intermetallic, formed during MA; in most cases, a subsequent anneal was required. On long milling time, an fcc phase, probably a nitride, formed as a result of contamination from the ambient atmosphere.

  18. Mechanical alloying of Nb-Al powders

    SciTech Connect

    Peng, Z.; Suryanarayana, C.; Froes, F.H.

    1996-01-01

    The effect of mechanical alloying (MA) on solid solubility extension, nanostructure formation, amorphization, intermetallic compound formation, and the occurrence of a face-centered cubic (fcc) phase in the Nb-Al system has been studied. Solid solubility extension was observed in both the terminal compositions and intermetallic compounds: 15 pct Nb in Al and 60 pct Al in Nb, well beyond the equilibrium and even rapid solidification levels (2.4 pct Nb and 25 pct Al, respectively) and increased homogeneity range for the NbAl{sub 3} phase. Nanostructured grains formed in all compositions. In the central part of the phase diagram, amorphization occurred predominantly. Only NbAl{sub 3}, the most stable intermetallic, formed during MA; in most cases, a subsequent anneal was required. On long milling time, an fcc phase, probably a nitride, formed as a result of contamination from the ambient atmosphere.

  19. Orientation relationship of eutectoid FeAl and FeAl2

    PubMed Central

    Scherf, A.; Kauffmann, A.; Kauffmann-Weiss, S.; Scherer, T.; Li, X.; Stein, F.; Heilmaier, M.

    2016-01-01

    Fe–Al alloys in the aluminium range of 55–65 at.% exhibit a lamellar microstructure of B2-ordered FeAl and triclinic FeAl2, which is caused by a eutectoid decomposition of the high-temperature Fe5Al8 phase, the so-called ∊ phase. The orientation relationship of FeAl and FeAl2 has previously been studied by Bastin et al. [J. Cryst. Growth (1978 ▸), 43, 745] and Hirata et al. [Philos. Mag. Lett. (2008 ▸), 88, 491]. Since both results are based on different crystallographic data regarding FeAl2, the data are re-evaluated with respect to a recent re-determination of the FeAl2 phase provided by Chumak et al. [Acta Cryst. (2010 ▸), C66, i87]. It is found that both orientation relationships match subsequent to a rotation operation of 180° about a 〈112〉 crystallographic axis of FeAl or by applying the inversion symmetry of the FeAl2 crystal structure as suggested by the Chumak data set. Experimental evidence for the validity of the previously determined orientation relationships was found in as-cast fully lamellar material (random texture) as well as directionally solidified material (∼〈110〉FeAl || solidification direction) by means of orientation imaging microscopy and global texture measurements. In addition, a preferential interface between FeAl and FeAl2 was identified by means of trace analyses using cross sectioning with a focused ion beam. On the basis of these habit planes the orientation relationship between the two phases can be described by (01)FeAl || (114) and [111]FeAl || [10]. There is no evidence for twinning within FeAl lamellae or alternating orientations of FeAl lamellae. Based on the determined orientation and interface data, an atomistic model of the structure relationship of Fe5Al8, FeAl and FeAl2 in the vicinity of the eutectoid decomposition is derived. This model is analysed with respect to the strain which has to be accommodated at the interface of FeAl and FeAl2. PMID:27047304

  20. A New Phase in ALS Research.

    PubMed

    Chong, P Andrew; Forman-Kay, Julie D

    2016-09-01

    In this issue of Structure, Conicella et al. (2016) present evidence that the low complexity C-terminal region of TDP-43 undergoes liquid-liquid phase separation. ALS-associated mutations alter this phase separation process, providing a possible mechanism for the pathology caused by these TDP-43 mutations. The work is strongly supportive of toxic loss of RNA processing function in ALS. PMID:27602988

  1. Tensile Behavior of Al2o3/feal + B and Al2o3/fecraly Composites

    NASA Technical Reports Server (NTRS)

    Draper, S. L.; Eldridge, J. I.; Aiken, B. J. M.

    1995-01-01

    The feasibility of Al2O3/FeAl + B and Al2O3/FeCrAlY composites for high-temperature applications was assessed. The major emphasis was on tensile behavior of both the monolithics and composites from 298 to 1100 K. However, the study also included determining the chemical compatibility of the composites, measuring the interfacial shear strengths, and investigating the effect of processing on the strength of the single-crystal Al2O3 fibers. The interfacial shear strengths were low for Al203/FeAl + B and moderate to high for Al203/FeCrAlY. The difference in interfacial bond strengths between the two systems affected the tensile behavior of the composites. The strength of the Al203 fiber was significantly degraded after composite processing for both composite systems and resulted in poor composite tensile properties. The ultimate tensile strength (UTS) values of the composites could generally be predicted with either rule of mixtures (ROM) calculations or existing models when using the strength of the etched-out fiber. The Al2O3/FeAl + B composite system was determined to be unfeasible due to poor interfacial shear strengths and a large mismatch in coefficient of thermal expansion (CTE). Development of the Al2O3/FeCrAlY system would require an effective diffusion barrier to minimize the fiber strength degradation during processing and elevated temperature service.

  2. Memory deficits and retrieval processes in ALS.

    PubMed

    Mantovan, M C; Baggio, L; Dalla Barba, G; Smith, P; Pegoraro, E; Soraru', G; Bonometto, P; Angelini, C

    2003-05-01

    Subtle neuropsychological deficits have been described in patients affected by amyotrophic lateral sclerosis (ALS) without dementia. Overall, selective impairment in memory function has been reported, but the source of memory impairment in ALS has yet to be defined. We performed neuropsychological screening in 20 ALS patients. Semantic encoding and post-encoding cue effects on the retrieval of word lists were investigated in the ALS patients and normal controls. Severity of memory impairment was correlated to cerebral blood perfusion detected by single photon emission computed tomography (SPECT). ALS patients showed moderate impairments in frontal and memory tests. Short-term memory was normal, while serial position retrieval of word lists with normal recency effect but poor primacy effect showed long-term memory deficit. ALS patients performed better in cued encoding than in cued post-encoding recall condition. In the cued post-encoding condition, the primacy effect in word list recall improved significantly in controls, but not in ALS patients, as compared with both the free recall and cued encoding conditions. SPECT hypoperfusion was observed in frontal and temporal areas in ALS patients. ALS patients showed a long-term memory deficit which did not improve in cued post-encoding condition as it does for controls. We hypothesize abnormal retrieval processes related to frontal lobe dysfunction which entails difficulties in generating stable long-memory traces at encoding.

  3. Memory deficits and retrieval processes in ALS.

    PubMed

    Mantovan, M C; Baggio, L; Dalla Barba, G; Smith, P; Pegoraro, E; Soraru', G; Bonometto, P; Angelini, C

    2003-05-01

    Subtle neuropsychological deficits have been described in patients affected by amyotrophic lateral sclerosis (ALS) without dementia. Overall, selective impairment in memory function has been reported, but the source of memory impairment in ALS has yet to be defined. We performed neuropsychological screening in 20 ALS patients. Semantic encoding and post-encoding cue effects on the retrieval of word lists were investigated in the ALS patients and normal controls. Severity of memory impairment was correlated to cerebral blood perfusion detected by single photon emission computed tomography (SPECT). ALS patients showed moderate impairments in frontal and memory tests. Short-term memory was normal, while serial position retrieval of word lists with normal recency effect but poor primacy effect showed long-term memory deficit. ALS patients performed better in cued encoding than in cued post-encoding recall condition. In the cued post-encoding condition, the primacy effect in word list recall improved significantly in controls, but not in ALS patients, as compared with both the free recall and cued encoding conditions. SPECT hypoperfusion was observed in frontal and temporal areas in ALS patients. ALS patients showed a long-term memory deficit which did not improve in cued post-encoding condition as it does for controls. We hypothesize abnormal retrieval processes related to frontal lobe dysfunction which entails difficulties in generating stable long-memory traces at encoding. PMID:12752394

  4. Genetics of Familial and Sporadic ALS

    ClinicalTrials.gov

    2016-03-21

    Amyotrophic Lateral Sclerosis (ALS); Familial Amyotrophic Lateral Sclerosis; Amyotrophic Lateral Sclerosis With Frontotemporal Dementia; Lou Gehrig's Disease; Motor Neuron Disease; Primary Lateral Sclerosis

  5. Superbend era begins swiftly at the ALS

    SciTech Connect

    Robinson, Art; Tamura, Lori

    2001-11-29

    The successful installation and commissioning of high-field superconducting bend magnets (superbends) in three curved sectors of ALS storage ring was the first time the magnet lattice of an operating synchrotron light source has been retrofitted in this fundamental way. As a result, the ALS now offers an expanded spectral range well into the hard x-ray region without compromising either the number of undulators or their high brightness in the soft x-ray region for which the ALS design was originally optimized. In sum, when the superbend-enhanced ALS started up for user operations in October 2001, it marked the beginning of a new era in its history.

  6. Effects of the Al content on pore structures of porous TieAl alloys

    SciTech Connect

    Jiang, Y; He, Y H; Zou, J; Huang, B; Liu, C

    2008-01-01

    PorousTi Alalloys with different nominal compositions were fabricated through a reactive synthesis of Ti and Al elemental powders. It has been found that the pore parameters vary with the Al contents, indicating that the nature of the pores can be manipulated through changing the Al contents. In addition, detailed structural characterizations showed that the fabricated porousTi Alalloys can have three crystalline phases (i.e., 2-Ti3Al, -TiAl, and TiAl3) when using different compositions. The fundamental reasons behind these phenomena have been explored.

  7. Response to Signorovitch et al.

    PubMed

    Flot, Jean-François; Debortoli, Nicolas; Hallet, Bernard; Van Doninck, Karine

    2016-08-22

    Signorovitch et al.[1] comment that an Oenothera-like meiosis [2] could produce a pattern similar to what we observed in our study of natural isolates of the bdelloid rotifer Adineta vaga, which we attributed to horizontal gene transfers (HGTs) [3]. Indeed, our HGT hypothesis appears at first sight difficult to conciliate with their observation of a congruent pattern of allele sharing at four large loci possibly located on different chromosomes [4]. However, one might imagine conditions under which massive horizontal gene transfer between bdelloid individuals could produce such a pattern, notably if the individuals involved had previously lost most of their heterozygosity because of their exposure to frequent desiccation (which produces DNA double-strand breaks [5]). In the published A. vaga genome the loss of heterozygosity due to large-scale gene conversion events or break-induced replication covers only about 10% of the genome [6], but this percentage may be much higher in environmental isolates that often experience dessication. Besides, if an Oenothera-like mode of meiosis occurs in bdelloids frequently enough to be detected in a single sampling of 29 individuals (as in [4]), one would expect males and meiosis to be observed at least occasionally, and instances of congruent allele sharing across loci should turn up frequently in genetic surveys. This was not the case in [3]: among the 82 A. vaga individuals sequenced for four nuclear markers, no trio of individuals presented congruent patterns of shared sequences at different loci. For these reasons, and in the absence of any direct evidence for an Oenothera-like meiosis in bdelloids, we still consider inter-bdelloid HGTs a more parsimonious explanation for our results. PMID:27554651

  8. Atomic structure and oxygen deficiency of the ultrathin aluminium oxide barrier in Al/AlOx/Al Josephson junctions

    NASA Astrophysics Data System (ADS)

    Zeng, Lunjie; Tran, Dung Trung; Tai, Cheuk-Wai; Svensson, Gunnar; Olsson, Eva

    2016-07-01

    Al/AlOx/Al Josephson junctions are the building blocks of a wide range of superconducting quantum devices that are key elements for quantum computers, extremely sensitive magnetometers and radiation detectors. The properties of the junctions and the superconducting quantum devices are determined by the atomic structure of the tunnel barrier. The nanoscale dimension and disordered nature of the barrier oxide have been challenges for the direct experimental investigation of the atomic structure of the tunnel barrier. Here we show that the miniaturized dimension of the barrier and the interfacial interaction between crystalline Al and amorphous AlOx give rise to oxygen deficiency at the metal/oxide interfaces. In the interior of the barrier, the oxide resembles the atomic structure of bulk aluminium oxide. Atomic defects such as oxygen vacancies at the interfaces can be the origin of the two-level systems and contribute to decoherence and noise in superconducting quantum circuits.

  9. Strengthening of Al and Al-Mg alloy wires by melt inoculation with Al/MgB2 nanocomposite

    NASA Astrophysics Data System (ADS)

    Florián-Algarín, David; Marrero, Raúl; Padilla, Alexandra; Suárez, Oscar Marcelo

    2015-12-01

    This study hinges on the feasibility of strengthening Al and Al-Mg wires by adding Al nanocomposite pellets containing MgB2 nanoparticles into the melt upon fabrication. These MgB2 nanoparticles were obtained by fragmentation using a high-energy ball mill, and were, afterward, mechanically alloyed with pure aluminum. The resulting MgB2/Al nanocomposite pellets were sintered at 260°C to be subsequently added into molten aluminum and an Al-Mg alloy melt. Cold rolling intercalated with stepwise annealing allowed the fabrication of 1 mm diameter wires with a final area reduction of 96%. Mechanical and physical properties of the treated wire specimens were compared to those of similarly processed pure aluminum wire. The ultimate tensile strength of the treated wires increased approximately double fold with respect to untreated wires at the expense of some loss in electrical conductivity.

  10. Atomic structure and oxygen deficiency of the ultrathin aluminium oxide barrier in Al/AlOx/Al Josephson junctions.

    PubMed

    Zeng, Lunjie; Tran, Dung Trung; Tai, Cheuk-Wai; Svensson, Gunnar; Olsson, Eva

    2016-01-01

    Al/AlOx/Al Josephson junctions are the building blocks of a wide range of superconducting quantum devices that are key elements for quantum computers, extremely sensitive magnetometers and radiation detectors. The properties of the junctions and the superconducting quantum devices are determined by the atomic structure of the tunnel barrier. The nanoscale dimension and disordered nature of the barrier oxide have been challenges for the direct experimental investigation of the atomic structure of the tunnel barrier. Here we show that the miniaturized dimension of the barrier and the interfacial interaction between crystalline Al and amorphous AlOx give rise to oxygen deficiency at the metal/oxide interfaces. In the interior of the barrier, the oxide resembles the atomic structure of bulk aluminium oxide. Atomic defects such as oxygen vacancies at the interfaces can be the origin of the two-level systems and contribute to decoherence and noise in superconducting quantum circuits. PMID:27403611

  11. Atomic structure and oxygen deficiency of the ultrathin aluminium oxide barrier in Al/AlOx/Al Josephson junctions

    PubMed Central

    Zeng, Lunjie; Tran, Dung Trung; Tai, Cheuk-Wai; Svensson, Gunnar; Olsson, Eva

    2016-01-01

    Al/AlOx/Al Josephson junctions are the building blocks of a wide range of superconducting quantum devices that are key elements for quantum computers, extremely sensitive magnetometers and radiation detectors. The properties of the junctions and the superconducting quantum devices are determined by the atomic structure of the tunnel barrier. The nanoscale dimension and disordered nature of the barrier oxide have been challenges for the direct experimental investigation of the atomic structure of the tunnel barrier. Here we show that the miniaturized dimension of the barrier and the interfacial interaction between crystalline Al and amorphous AlOx give rise to oxygen deficiency at the metal/oxide interfaces. In the interior of the barrier, the oxide resembles the atomic structure of bulk aluminium oxide. Atomic defects such as oxygen vacancies at the interfaces can be the origin of the two-level systems and contribute to decoherence and noise in superconducting quantum circuits. PMID:27403611

  12. Atomic structure and oxygen deficiency of the ultrathin aluminium oxide barrier in Al/AlOx/Al Josephson junctions.

    PubMed

    Zeng, Lunjie; Tran, Dung Trung; Tai, Cheuk-Wai; Svensson, Gunnar; Olsson, Eva

    2016-07-12

    Al/AlOx/Al Josephson junctions are the building blocks of a wide range of superconducting quantum devices that are key elements for quantum computers, extremely sensitive magnetometers and radiation detectors. The properties of the junctions and the superconducting quantum devices are determined by the atomic structure of the tunnel barrier. The nanoscale dimension and disordered nature of the barrier oxide have been challenges for the direct experimental investigation of the atomic structure of the tunnel barrier. Here we show that the miniaturized dimension of the barrier and the interfacial interaction between crystalline Al and amorphous AlOx give rise to oxygen deficiency at the metal/oxide interfaces. In the interior of the barrier, the oxide resembles the atomic structure of bulk aluminium oxide. Atomic defects such as oxygen vacancies at the interfaces can be the origin of the two-level systems and contribute to decoherence and noise in superconducting quantum circuits.

  13. Influence of AlN thickness on AlGaN epilayer grown by MOCVD

    NASA Astrophysics Data System (ADS)

    Jayasakthi, M.; Juillaguet, S.; Peyre, H.; Konczewicz, L.; Baskar, K.; Contreras, S.

    2016-10-01

    AlGaN/AlN layers were grown by metalorganic chemical vapor deposition (MOCVD) on sapphire substrates. The AlN buffer thickness was varied from 400 nm to 800 nm. The AlGaN layer thickness was 1000 nm. The crystalline quality, thickness and composition of AlGaN were determined using high resolution X-ray diffraction (HRXRD). The threading dislocation density (TDD) was found to decrease with increase of AlN layer thickness. Reciprocal space mapping (RSM) was used to estimate the strain and relaxation between AlGaN and AlN. The optical properties of AlGaN layers were investigated by temperature dependent photoluminescence (PL). PL intensities of AlGaN layers increases with increasing the AlN thickness. The surface morphology of AlGaN was studied by atomic force microscopy (AFM). Root mean square (RMS) roughness values were found to be decreased while increase of AlN thickness.

  14. Diana Al-Hadid: Identity and Heritage

    ERIC Educational Resources Information Center

    Jungerberg, Tom; Smith, Anna; Borsh, Colleen

    2012-01-01

    Diana Al-Hadid's sculptures reflect the many locations, cultures, histories, and mythologies that have shaped her as an artist. In large-scale works which have the appearance of architectural ruins, Al-Hadid employs imagery drawn from many diverse interests including science and technology, history, and literature. She also incorporates images and…

  15. Quantitatively Probing the Al Distribution in Zeolites

    SciTech Connect

    Vjunov, Aleksei; Fulton, John L.; Huthwelker, Thomas; Pin, Sonia; Mei, Donghai; Schenter, Gregory K.; Govind, Niranjan; Camaioni, Donald M.; Hu, Jian Z.; Lercher, Johannes A.

    2014-06-11

    The degree of substitution of Si4+ by Al3+ in the oxygen-terminated tetrahedra (Al T-sites) of zeolites determines the concentration of ion-exchange and Brønsted acid sites. As the location of the tetrahedra and the associated subtle variations in bond angles influence the acid strength, quantitative information about Al T-sites in the framework is critical to rationalize catalytic properties and to design new catalysts. A quantitative analysis is reported that uses a combination of extended X-ray absorption fine structure (EXAFS) analysis and 27Al MAS NMR spectroscopy supported by DFT-based molecular dynamics simulations. To discriminate individual Al atoms, sets of ab initio EXAFS spectra for various T-sites are generated from DFT-based molecular dynamics simulations allowing quantitative treatment of the EXAFS single- and multiple-photoelectron scattering processes out to 3-4 atom shells surrounding the Al absorption center. It is observed that identical zeolite types show dramatically different Al-distributions. A preference of Al for T-sites that are part of one or more 4-member rings in the framework over those T-sites that are part of only 5- and 6-member rings in the HBEA150 sample has been determined from a combination of these methods. This work was supported by the U. S. Department of Energy (DOE), Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences.

  16. Durability Assessment of TiAl Alloys

    NASA Technical Reports Server (NTRS)

    Draper, Susan L.; Lerch, Bradley A.

    2008-01-01

    The durability of TiAl is a prime concern for the implementation of TiAl into aerospace engines. Two durability issues, the effect of high temperature exposure on mechanical properties and impact resistance, have been investigated and the results are summarized in this paper. Exposure to elevated temperatures has been shown to be detrimental to the room temperature ductility of gamma alloys with the most likely mechanisms being the ingress of interstitials from the surface. Fluorine ion implantation has been shown to improve the oxidation resistance of gamma alloys, and ideally it could also improve the environmental embrittlement of high Nb content TiAl alloys. The effect of F ion implantation on the surface oxidation and embrittlement of a third generation, high Nb content TiAl alloy (Ti-45Al-5Nb-B-C) were investigated. Additionally, the ballistic impact resistance of a variety of gamma alloys, including Ti-48Al-2Cr- 2Nb, Ti-47Al-2Cr-2Nb, ABB-2, ABB-23, NCG359E, 95A and Ti-45Al-5Nb-B-C was accessed. Differences in the ballistic impact properties of the various alloys will be discussed, particularly with respect to their manufacturing process, microstructure, and tensile properties.

  17. Energetics of Al13 Keggin cluster compounds

    PubMed Central

    Armstrong, Christopher R.; Casey, William H.; Navrotsky, Alexandra

    2011-01-01

    The ϵ-Al13 Keggin aluminum hydroxide clusters are essential models in establishing molecular pathways for geochemical reactions. Enthalpies of formation are reported for two salts of aluminum centered ϵ-Keggin clusters, Al13 selenate, (Na(AlO4)Al12(OH)24(SeO4)4•12H2O) and Al13 sulfate, (NaAlO4Al12(OH)24(SO4)4•12H2O). The measured enthalpies of solution, ΔHsol, at 28 °C in 5 N HCl for the ε-Al13 selenate and sulfate are −924.57 (± 3.83) and −944.30 ( ± 5.66) kJ·mol-1, respectively. The enthalpies of formation from the elements, ΔHf,el, for Al13 selenate and sulfate are −19,656.35 ( ± 67.30) kJ·mol-1, and −20,892.39 ( ± 70.01) kJ·mol-1, respectively. In addition, ΔHf,el for sodium selenate decahydrate was calculated using data from high temperature oxide melt solution calorimetry measurements: −4,006.39 ( ± 11.91) kJ·mol-1. The formation of both ε-Al13 Keggin cluster compounds is exothermic from oxide-based components but energetically unfavorable with respect to a gibbsite-based assemblage. To understand the relative affinity of the ϵ-Keggin clusters for selenate and sulfate, the enthalpy associated with two S-Se exchange reactions was calculated. In the solid state, selenium is favored in the Al13 compound relative to the binary chalcogenate, while in 5 N HCl, sulfur is energetically favored in the cluster compound compared to the aqueous solution. This contribution represents the first thermodynamic study of ε-Al13 cluster compounds and establishes a method for other such molecules, including the substituted versions that have been created for kinetic studies. Underscoring the importance of ε-Al13 clusters in natural and anthropogenic systems, these data provide conclusive thermodynamic evidence that the Al13 Keggin cluster is a crucial intermediate species in the formation pathway from aqueous aluminum monomers to aluminum hydroxide precipitates. PMID:21852572

  18. NiAl alloys for structural uses

    NASA Technical Reports Server (NTRS)

    Koss, D. A.

    1991-01-01

    Alloys based on the intermetallic compound NiAl are of technological interest as high temperature structural alloys. These alloys possess a relatively low density, high melting temperature, good thermal conductivity, and (usually) good oxidation resistance. However, NiAl and NiAl-base alloys suffer from poor fracture resistance at low temperatures as well as inadequate creep strength at elevated temperatures. This research program explored macroalloying additions to NiAl-base alloys in order to identify possible alloying and processing routes which promote both low temperature fracture toughness and high temperature strength. Initial results from the study examined the additions of Fe, Co, and Hf on the microstructure, deformation, and fracture resistance of NiAl-based alloys. Of significance were the observations that the presence of the gamma-prime phase, based on Ni3Al, could enhance the fracture resistance if the gamma-prime were present as a continuous grain boundary film or 'necklace'; and the Ni-35Al-20Fe alloy was ductile in ribbon form despite a microstructure consisting solely of the B2 beta phase based on NiAl. The ductility inherent in the Ni-35Al-20Fe alloy was explored further in subsequent studies. Those results confirm the presence of ductility in the Ni-35Al-20Fe alloy after rapid cooling from 750 - 1000 C. However exposure at 550 C caused embrittlement; this was associated with an age-hardening reaction caused by the formation of Fe-rich precipitates. In contrast, to the Ni-35Al-20Fe alloy, exploratory research indicated that compositions in the range of Ni-35Al-12Fe retain the ordered B2 structure of NiAl, are ductile, and do not age-harden or embrittle after thermal exposure. Thus, our recent efforts have focused on the behavior of the Ni-35Al-12Fe alloy. A second parallel effort initiated in this program was to use an alternate processing technique, mechanical alloying, to improve the properties of NiAl-alloys. Mechanical alloying in the

  19. Corrosion Studies of 2195 Al-Li Alloy and 2219 Al Alloy with Differing Surface Treatments

    NASA Technical Reports Server (NTRS)

    Danford, M. D.; Mendrek, M. J.

    1998-01-01

    Corrosion studies of 2195 Al-Li and 2219 Al alloys have been conducted using the scanning reference electrode technique (SRET) and the polarization resistance (PR) technique. The SRET was used to study corrosion mechanisms, while corrosion rate measurements were studied with the PR technique. Plates of Al203 blasted, soda blasted and conversion coated 2219 Al were coated with Deft primer and the corrosion rates studied with the EIS technique. Results from all of these studies are presented.

  20. Consolidation of Al2O3/Al Nanocomposite Powder by Cold Spray

    NASA Astrophysics Data System (ADS)

    Poirier, Dominique; Legoux, Jean-Gabriel; Drew, Robin A. L.; Gauvin, Raynald

    2011-01-01

    While the improvement in mechanical properties of nanocomposites makes them attractive materials for structural applications, their processing still presents significant challenges. In this article, cold spray was used to consolidate milled Al and Al2O3/Al nanocomposite powders as well as the initial unmilled and unreinforced Al powder. The microstructure and nanohardness of the feedstock powders as well as those of the resulting coatings were compared. The results show that the large increase in hardness of the Al powder after mechanical milling is preserved after cold spraying. Good quality coating with low porosity is obtained from milled Al. However, the addition of Al2O3 to the Al powder during milling decreases the powder and coating nanohardness. This lower hardness is attributed to non-optimized milling parameters leading to cracked particles with insufficient Al2O3 embedding in Al. The coating produced from the milled Al2O3/Al mixture also showed lower particle cohesion and higher amount of porosity.

  1. Japanese version of the ALS-FTD-Questionnaire (ALS-FTD-Q-J).

    PubMed

    Watanabe, Yasuhiro; Beeldman, Emma; Raaphorst, Joost; Izumi, Yuishin; Yoshino, Hiide; Masuda, Michihito; Atsuta, Naoki; Ito, Satoru; Adachi, Tadashi; Adachi, Yoshiki; Yokota, Osamu; Oda, Masaya; Hanashima, Ritsuko; Ogino, Mieko; Ichikawa, Hiroo; Hasegawa, Kazuko; Kimura, Hideki; Shimizu, Toshio; Aiba, Ikuko; Yabe, Hayato; Kanba, Makoto; Kusumi, Kimiyoshi; Aoki, Tetsuya; Hiroe, Yu; Watanabe, Hirohisa; Nishiyama, Kazutoshi; Nomoto, Masahiro; Sobue, Gen; Nakashima, Kenji

    2016-08-15

    Amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD) share common clinical, genetic and neuropathological features. Some ALS patients have behavioral/personality changes, which could result in significant obstacles in the care provided by family members and caregivers. An easy screening tool would contribute greatly to the evaluation of these symptoms. We translated the ALS-FTD-Questionnaire, developed in the Netherlands, into Japanese (ALS-FTD-Q-J) and examined the clinimetric properties (internal consistency, construct and clinical validity). Patients with ALS and/or behavioral variant FTD (bvFTD) were evaluated alongside healthy controls in this multicenter study. All ALS patients, regardless of bvFTD status, were further evaluated by the frontal behavioral inventory (FBI) and for frontal/executive function, cognition, anxiety/depression, and motor functions. Data from 146 subjects were analyzed: ALS (92), ALS-bvFTD (6), bvFTD (16), and healthy controls (32). The internal consistency of the ALS-FTD-Q-J was good (Cronbach α=0.92). The ALS-FTD-Q-J showed construct validity as it exhibited a high correlation with the FBI (r=0.79). However, correlations were moderate with anxiety/depression and low with cognitive scales, in contrast to the original report, i.e. a moderate correlation with cognition and a low correlation with anxiety/depression. The ALS-FTD-Q-J discriminated ALS patients from (ALS-)bvFTD patients and controls. Thus, the ALS-FTD-Q-J is useful for evaluating Japanese ALS/FTD patients.

  2. Japanese version of the ALS-FTD-Questionnaire (ALS-FTD-Q-J).

    PubMed

    Watanabe, Yasuhiro; Beeldman, Emma; Raaphorst, Joost; Izumi, Yuishin; Yoshino, Hiide; Masuda, Michihito; Atsuta, Naoki; Ito, Satoru; Adachi, Tadashi; Adachi, Yoshiki; Yokota, Osamu; Oda, Masaya; Hanashima, Ritsuko; Ogino, Mieko; Ichikawa, Hiroo; Hasegawa, Kazuko; Kimura, Hideki; Shimizu, Toshio; Aiba, Ikuko; Yabe, Hayato; Kanba, Makoto; Kusumi, Kimiyoshi; Aoki, Tetsuya; Hiroe, Yu; Watanabe, Hirohisa; Nishiyama, Kazutoshi; Nomoto, Masahiro; Sobue, Gen; Nakashima, Kenji

    2016-08-15

    Amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD) share common clinical, genetic and neuropathological features. Some ALS patients have behavioral/personality changes, which could result in significant obstacles in the care provided by family members and caregivers. An easy screening tool would contribute greatly to the evaluation of these symptoms. We translated the ALS-FTD-Questionnaire, developed in the Netherlands, into Japanese (ALS-FTD-Q-J) and examined the clinimetric properties (internal consistency, construct and clinical validity). Patients with ALS and/or behavioral variant FTD (bvFTD) were evaluated alongside healthy controls in this multicenter study. All ALS patients, regardless of bvFTD status, were further evaluated by the frontal behavioral inventory (FBI) and for frontal/executive function, cognition, anxiety/depression, and motor functions. Data from 146 subjects were analyzed: ALS (92), ALS-bvFTD (6), bvFTD (16), and healthy controls (32). The internal consistency of the ALS-FTD-Q-J was good (Cronbach α=0.92). The ALS-FTD-Q-J showed construct validity as it exhibited a high correlation with the FBI (r=0.79). However, correlations were moderate with anxiety/depression and low with cognitive scales, in contrast to the original report, i.e. a moderate correlation with cognition and a low correlation with anxiety/depression. The ALS-FTD-Q-J discriminated ALS patients from (ALS-)bvFTD patients and controls. Thus, the ALS-FTD-Q-J is useful for evaluating Japanese ALS/FTD patients. PMID:27423564

  3. A new discontinuously reinforced aluminum MMC: Al+AlB{sub 2} flakes

    SciTech Connect

    HALL,AARON C.; ECONOMY,J.

    2000-06-08

    Development of a novel metal matrix composite based on the Al-B alloy system has been undertaken. Preparation of this discontinuously reinforced material is based on the precipitation of high aspect ratio AlB{sub 2} from an Al-B alloy. This paper describes a number of efforts forced on preparing high volume fractions (> 30 v%) of AlB{sub 2} in aluminum. New insights into the behavior of the Al-B alloys system allowed this effort to be successful.

  4. Atomistic Modeling of RuAl and (RuNi) Al Alloys

    NASA Technical Reports Server (NTRS)

    Gargano, Pablo; Mosca, Hugo; Bozzolo, Guillermo; Noebe, Ronald D.; Gray, Hugh R. (Technical Monitor)

    2002-01-01

    Atomistic modeling of RuAl and RuAlNi alloys, using the BFS (Bozzolo-Ferrante-Smith) method for alloys is performed. The lattice parameter and energy of formation of B2 RuAl as a function of stoichiometry and the lattice parameter of (Ru(sub 50-x)Ni(sub x)Al(sub 50)) alloys as a function of Ni concentration are computed. BFS based Monte Carlo simulations indicate that compositions close to Ru25Ni25Al50 are single phase with no obvious evidence of a miscibility gap and separation of the individual B2 phases.

  5. Effects of hydrogen absorption in TbNiAl and UNiAl

    SciTech Connect

    Bordallo, H.N.; Nakotte, H.; Schultz, A.; Kolomiets, A.V.; Havela, L.; Andreev, A.V.

    1998-12-31

    Although hydrides of intermetallic compounds are used extensively as hydrogen-storage media, little is known about the exact nature of metal-hydrogen interactions. However, this knowledge is of essential importance for the understanding of thermodynamics and other properties. Hydrides (deuterides) of TbNiAl and UNiAl have been widely studied because of drastic increase of magnetic ordering temperature under hydrogenation. Here the authors report neutron-diffraction results of the three deuterides, TbNiAlD{sub 1.28}, TbNiAlD{sub 0.8}a nd UNiAlD{sub 2.23}.

  6. Arsenate uptake by Al nanoclusters and other Al-based sorbents during water treatment.

    PubMed

    Mertens, Jasmin; Rose, Jérôme; Wehrli, Bernhard; Furrer, Gerhard

    2016-01-01

    In many parts of the world, arsenic from geogenic and anthropogenic sources deteriorates the quality of drinking water resources. Effective methods of arsenic removal include adsorption and coagulation with iron- and aluminum-based materials, of which polyaluminum chloride is widely employed as coagulant in water treatment due to its low cost and high efficiency. We compared the arsenic uptake capacity and the arsenic bonding sites of different Al-based sorbents, including Al nanoclusters, polyaluminum chloride, polyaluminum granulate, and gibbsite. Extended X-ray absorption fine structure (EXAFS) spectroscopy revealed that As(V) forms bidentate-binuclear complexes in interaction with all Al-based removal agents. The octahedral configuration of nanoclusters and the distribution of sorption sites remain the same in all types of removal agents consisting of nano-scale Al oxyhydroxide particles. The obtained distances for As(V)-O and As(V)-Al agreed with previously published data and were found to be 1.69 ± 0.02 Å and 3.17-3.21 Å, respectively. Our study suggests that As(V) binds to Al nanoclusters as strongly as to Al oxide surfaces. The As sorption capacity of Al nanoclusters was found to be very similar to that of Al clusters in a polyaluminum chloride. The most efficient Al-based sorbents for arsenic removal were Al nanoclusters, followed by polyaluminum granulate. PMID:26613179

  7. Hybrid Al + Al3Ni metallic foams synthesized in situ via laser engineered net shaping

    NASA Astrophysics Data System (ADS)

    Zheng, Baolong; Li, Ying; Smugeresky, John E.; Zhou, Yizhang; Baker, Dean; Lavernia, Enrique J.

    2011-09-01

    A hybrid, Al + Al3Ni metallic foam was synthesized in situ via laser engineered net shaping (LENS®) of Ni-coated 6061 Al powder in the absence of a foaming agent. During LENS® processing, the Ni coating reacted with the Al matrix, resulting in the simultaneous formation of a fine dispersion of Al3Ni, and a high volume fraction of porosity. As a reinforcement phase, the intermetallic compound formed particles with a size range of 1-5 µm and a volume fraction of 63%, with accompanying 35-300 µm pores with a 60% volume fraction. The microstructure of the as-deposited Al + Al3Ni composite foams was characterized using SEM, EDS, XRD and TEM/HRTEM techniques. The evolution of the microstructure was analyzed on the basis of the thermal field present during deposition, paying particular attention to the thermodynamics of the Al3Ni intermetallic compound formation as well as discussing the mechanisms that may be responsible for the observed porosity. The mechanical behavior of the as-deposited material was characterized using compression and microhardness testing, indicating that the yield strength and hardness are 190 MPa and 320 HV, respectively, which represents an increase of over three times higher than that of annealed Al6061, or similar to heat-treated Al6061 fully dense matrix, and much higher than those of traditional Al alloy foams, and with a low density of 1.64 g/m3.

  8. Ni{sub 3}Al aluminide alloys

    SciTech Connect

    Liu, C.T.

    1993-10-01

    This paper provides a brief review of the recent progress in research and development of Ni{sub 3}Al and its alloys. Emphasis has been placed on understanding low ductility and brittle fracture of Ni{sub 3}Al alloys at ambient and elevated temperatures. Recent studies have resulted in identifying both intrinsic and extrinsic factors governing the fracture behavior of Ni{sub 3}Al alloys. Parallel efforts on alloy design using physical metallurgy principles have led to properties for structural use. Industrial interest in these alloys is high, and examples of industrial involvement in processing and utilization of these alloys are briefly mentioned.

  9. InAlN/AlN/GaN heterostructures for high electron mobility transistors

    NASA Astrophysics Data System (ADS)

    Usov, S. O.; Sakharov, A. V.; Tsatsulnikov, A. F.; Lundin, V. W.; Zavarin, E. E.; Nikolaev, A. E.; Yagovkina, M. A.; Zemlyakov, V. E.; Egorkin, V. I.; Ustinov, V. M.

    2016-08-01

    The results of development of InAlN/AlN/GaN heterostructures, grown on sapphire substrates by metal-organic chemical vapour deposition, and high electron mobility transistors (HEMTs) based on them are presented. The dependencies of the InAlN/AlN/GaN heterostructure properties on epitaxial growth conditions were investigated. The optimal indium content and InAlN barrier layer thicknesses of the heterostructures for HEMT s were determined. The possibility to improve the characteristics of HEMTs by in-situ passivation by Si3N4 thin protective layer deposited in the same epitaxial process was demonstrated. The InAlN/AlN/GaN heterostructure grown on sapphire substrate with diameter of 100 mm were obtained with sufficiently uniform distribution of sheet resistance. The HEMTs with saturation current of 1600 mA/mm and transconductance of 230 mS/mm are demonstrated.

  10. A Rechargeable Al/S Battery with an Ionic-Liquid Electrolyte.

    PubMed

    Gao, Tao; Li, Xiaogang; Wang, Xiwen; Hu, Junkai; Han, Fudong; Fan, Xiulin; Suo, Liumin; Pearse, Alex J; Lee, Sang Bok; Rubloff, Gary W; Gaskell, Karen J; Noked, Malachi; Wang, Chunsheng

    2016-08-16

    Aluminum metal is a promising anode material for next generation rechargeable batteries owing to its abundance, potentially dendrite-free deposition, and high capacity. The rechargeable aluminum/sulfur (Al/S) battery is of great interest owing to its high energy density (1340 Wh kg(-1) ) and low cost. However, Al/S chemistry suffers poor reversibility owing to the difficulty of oxidizing AlSx . Herein, we demonstrate the first reversible Al/S battery in ionic-liquid electrolyte with an activated carbon cloth/sulfur composite cathode. Electrochemical, spectroscopic, and microscopic results suggest that sulfur undergoes a solid-state conversion reaction in the electrolyte. Kinetics analysis identifies that the slow solid-state sulfur conversion reaction causes large voltage hysteresis and limits the energy efficiency of the system.

  11. High performance AlGaN/GaN HEMTs with AlN/SiNx passivation

    NASA Astrophysics Data System (ADS)

    Xin, Tan; Yuanjie, Lü; Guodong, Gu; Li, Wang; Shaobo, Dun; Xubo, Song; Hongyu, Guo; Jiayun, Yin; Shujun, Cai; Zhihong, Feng

    2015-07-01

    AlGaN/GaN high electron-mobility transistors (HEMTs) with 5 nm AlN passivation by plasma enhanced atomic layer deposition (PEALD) were fabricated, covered by 50 nm SiNx which was grown by plasma enhanced chemical vapor deposition (PECVD). With PEALD AlN passivation, current collapse was suppressed more effectively and the devices show better subthreshold characteristics. Moreover, the insertion of AlN increased the RF transconductance, which lead to a higher cut-off frequency. Temperature dependence of DC characteristics demonstrated that the degradations of drain current and maximum transconductance at elevated temperatures for the AlN/SiNx passivated devices were much smaller compared with the devices with SiNx passivation, indicating that PEALD AlN passivation can improve the high temperature operation of the AlGaN/GaN HEMTs. Project supported by the National Natural Science Foundation of China (No. 60890192).

  12. A Rechargeable Al/S Battery with an Ionic-Liquid Electrolyte.

    PubMed

    Gao, Tao; Li, Xiaogang; Wang, Xiwen; Hu, Junkai; Han, Fudong; Fan, Xiulin; Suo, Liumin; Pearse, Alex J; Lee, Sang Bok; Rubloff, Gary W; Gaskell, Karen J; Noked, Malachi; Wang, Chunsheng

    2016-08-16

    Aluminum metal is a promising anode material for next generation rechargeable batteries owing to its abundance, potentially dendrite-free deposition, and high capacity. The rechargeable aluminum/sulfur (Al/S) battery is of great interest owing to its high energy density (1340 Wh kg(-1) ) and low cost. However, Al/S chemistry suffers poor reversibility owing to the difficulty of oxidizing AlSx . Herein, we demonstrate the first reversible Al/S battery in ionic-liquid electrolyte with an activated carbon cloth/sulfur composite cathode. Electrochemical, spectroscopic, and microscopic results suggest that sulfur undergoes a solid-state conversion reaction in the electrolyte. Kinetics analysis identifies that the slow solid-state sulfur conversion reaction causes large voltage hysteresis and limits the energy efficiency of the system. PMID:27417442

  13. Fabrication and characterization of all-refractory NbCN/Al/AlO(x)/Al/Nb junctions

    NASA Astrophysics Data System (ADS)

    Barber, Z. H.; Blamire, M. G.; Somekh, R. E.; Evetts, J. E.

    1993-03-01

    High-quality AlO(x) tunnel barriers have been fabricated on epitaxial niobium carbonitride (NbCN) base layers by the deposition of an Al layer followed by thermal oxidation. By careful control of its uniformity, the thickness of the Al layer has been reduced to less than 3 nm, which results in an average gap voltage, Vg(NbCN), of up to 2.65 mV. Using a self-aligned whole-wafer processing route, high-quality NbCN/Al/AlO(x)/Al/Nb junctions as small as 0.6 sq mm have been made. These junctions offer considerable advantages over directly deposited barriers in terms of minimal subgap leakage, good control of the barrier conductance, and simple processing procedures. It was shown that submicron junctions can be fabricated with no gap smearing or reduction in quality. Using only Nb counterelectrodes total gap voltages up to 4.0 mV, with widths of 0.6 mV, have been demonstrated in high-quality junctions.

  14. Characterization of AlInN/AlN/GaN Heterostructures with Different AlN Buffer Thickness

    NASA Astrophysics Data System (ADS)

    Çörekçi, S.; Dugan, S.; Öztürk, M. K.; Çetin, S. Ş.; Çakmak, M.; Özçelik, S.; Özbay, E.

    2016-07-01

    Two AlInN/AlN/GaN heterostructures with 280-nm- and 400-nm-thick AlN buffer grown on sapphire substrates by metal-organic chemical vapor deposition (MOCVD) have been investigated by x-ray diffraction (XRD), atomic force microscopy (AFM), photoluminescence (PL) and Hall-effect measurements. The symmetric (0002) plane with respect to the asymmetric (10bar{1}2) plane in the 280-nm-thick AlN buffer has a higher crystal quality, as opposed to the 400-nm-thick buffer. The thinner buffer improves the crystallinity of both (0002) and (10bar{1}2) planes in the GaN layers, it also provides a sizeable reduction in dislocation density of GaN. Furthermore, the lower buffer thickness leads to a good quality surface with an rms roughness of 0.30 nm and a dark spot density of 4.0 × 108 cm-2. The optical and transport properties of the AlInN/AlN/GaN structure with the relatively thin buffer are compatible with the enhancement in its structural quality, as verified by XRD and AFM results.

  15. Interdiffusion in Diffusion Couples: U-Mo v. Al and Al-Si

    SciTech Connect

    D. D. Keiser, Jr.; E. Perez; B. Yao; Y. H. Sohn

    2009-11-01

    Interdiffusion and microstructural development in the U-Mo-Al system was examined using solid-tosolid diffusion couples consisting of U-7wt.%Mo, U-10wt.%Mo and U-12wt.%Mo vs. pure Al, annealed at 600°C for 24 hours. The influence of Si alloying addition (up to 5 wt.%) in Al on the interdiffusion microstructural development was also examined using solid-to-solid diffusion couples consisting of U-7wt.%Mo, U-10wt.%Mo and U-12wt.%Mo vs. pure Al, Al-2wt.%Si, and Al-5wt.%Si annealed at 550°C up to 20 hours. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and electron probe microanalysis (EPMA) were employed to examine the development of a very fine multiphase intermetallic layer. In ternary U-Mo-Al diffusion couples annealed at 600°C for 24 hours, interdiffusion microstructure varied of finely dispersed UAl3, UAl4, U6Mo4Al43, and UMo2Al20 phases while the average composition throughout the interdiffusion zone remained constant at approximately 80 at.% Al. Interdiffusion microstructure observed by SEM/TEM analyses and diffusion paths drawn from concentration profiles determined by EPMA appear to deviate from the assumption of “local thermodynamic equilibrium,” and suggest that interdiffusion occurs via supersaturated UAl4 followed by equilibrium transformation into UAl3, U6Mo4Al43, UAl4 and UMo2Al20 phases. Similar observation was made for U-Mo vs. Al diffusion couples annealed at 550°C. The addition of Si (up to 5 wt.%) in Al significantly reduced the thickness of the intermetallic layer by changing the constituent phases of the interdiffusion zone developed in U-Mo vs. Al-Si diffusion couples. Specifically, the formation of (U,Mo)(Al,Si)3 with relatively large solubility for Mo and Si, along with UMo2Al20 phases was observed along with disappearance of U6Mo4Al43 and UAl4 phases. Simplified understanding based on U-Al, U-Si, and Mo-Si binary phase diagrams is discussed in the light of the beneficial effect of Si alloying addition.

  16. Smoking Tied to Shorter Survival with ALS

    MedlinePlus

    ... with ALS between 2007 and 2011 in northern Italy. They also looked at chronic lung disease (COPD) ... of neuroscience at the University of Turin in Italy, led the study. SOURCE: BMJ , news release, Sept. ...

  17. Stem Cells Deemed Safe for ALS Patients

    MedlinePlus

    ... baby step forward," said lead researcher Dr. Jonathan Glass, of Emory University, in Atlanta. "We can say this procedure is doable in ALS patients," Glass said. "Now we have to test whether it's ...

  18. Glial cells in ALS: the missing link?

    PubMed

    Raibon, Elsa; Todd, Lisa Marie; Möller, Thomas

    2008-08-01

    Amyotrophic lateral sclerosis (ALS) was initially known as Charcot's sclerosis, named after the French neurobiologist and physician Jean-Martin Charcot who first described this type of muscular atrophy in the early nineteenth century. In the United States, ALS became widely known as Lou Gehrig's disease after the famous baseball player who succumbed to the disease in the late 1930s. Currently, ALS is the most common motor neuron disease, with a worldwide incidence of 8 cases per 100,000 population per year. Familial forms constitute approximately 5% to 10% of all cases. Onset increases with age, with a peak in the seventh decade and a slight preponderance (relative risk, 1.3-1.5) among men compared with women. Rapid progression of motor neuron loss leads to death an average of 3 to 5 years after symptom onset. The cause of ALS remains unknown and there is still no curative therapy.

  19. Thermal Conductivity of Al-Salt Composites

    NASA Astrophysics Data System (ADS)

    Li, Peng; Zhang, Mei; Wang, Lijun; Seetharaman, Seshadri

    2015-11-01

    With a view to examine the possibility of estimating the content of entrapped metallic aluminium in the salt cake from aluminium remelting, the thermal diffusivity of reference composites of KCl-NaCl-Al was measured as a function of aluminium metal content at room temperature. The thermal conductivity of the reference composites was found to increase with the metallic Al content. The lumped parameter model approach was carried out to discuss the influence of different geometry arrangements of each phase, viz. air, salts and metallic aluminium on the thermal conductivity. Application of the present results to industrial samples indicates that factors such as the interfacial condition of metallic Al particles have to be considered in order to estimate the amount of entrapped Al in the salt cake.

  20. 12th Annual ALS Users' Association Meeting

    SciTech Connect

    Robinson, Arthur L.

    1999-12-17

    Science took the front seat as 219 Advanced Light Source (ALS) users and staff gathered on Monday and Tuesday, October 18 and 19 for the twelfth annual users' meeting. The bulk of the meeting was dedicated to reports on science at the ALS. Packed into two busy days were 31 invited oral presentations and 80 submitted poster presentations, as well as time to visit 24 vendor booths. The oral sessions were dedicated to environmental science, chemical dynamics, biosciences, magnetic materials, and atomic and molecular science. In addition, there was an ALS highlights session that emphasized new results and a session comprising highlights from the young scientists who will carry the ALS into the future.

  1. 17th Annual ALS Users' Association Meeting

    SciTech Connect

    Robinson, Art; Tamura, Lori

    2004-11-29

    It's not exactly Russian roulette, but scheduling October events outdoors is not risk-free, even in usually sunny California. An overflow crowd of more than 400 registered users, ALS staff, and vendors enjoyed a full indoor program featuring science highlights and workshops spread over two and a half days from October 18 to October 20. However, a major storm, heralding the onset of the San Francisco Bay Area rainy season, posed a few weather challenges for the events on the ALS patio.

  2. Continuous germanene layer on Al(111).

    PubMed

    Derivaz, Mickael; Dentel, Didier; Stephan, Régis; Hanf, Marie-Christine; Mehdaoui, Ahmed; Sonnet, Philippe; Pirri, Carmelo

    2015-04-01

    Germanene, a 2D honeycomb structure similar to silicene, has been fabricated on Al(111). The 2D germanene layer covers uniformly the substrate with a large coherence over the Al(111) surface atomic plane. It is characterized by a (3 × 3) superstructure with respect to the substrate lattice, shown by low energy electron diffraction and scanning tunnelling microscopy. First-principles calculations indicate that the Ge atoms accommodate in a very regular atomic configuration with a buckled conformation. PMID:25802988

  3. Metastability in the MgAl2O4-Al2O3 System

    DOE PAGES

    Wilkerson, Kelley R.; Smith, Jeffrey D.; Hemrick, James G.

    2014-07-22

    Aluminum oxide must take a spinel form ( γ-Al2O3) at elevated temperatures in order for extensive solid solution to form between MgAl2O4 and α-Al2O3. The solvus line between MgAl2O4 and Al2O3 has been defined at 79.6 wt% Al2O3 at 1500°C, 83.0 wt% Al2O3 at 1600°C, and 86.5 wt% Al2O3 at 1700°C. A metastable region has been defined at temperatures up to 1700°C which could have significant implications for material processing and properties. Additionally, initial processing could have major implications on final chemistry. The spinel solid solution region has been extended to form an infinite solid solution with Al2O3 at elevatedmore » temperatures. A minimum in melting at 1975°C and a chemistry of 96 wt% Al2O3 rather than a eutectic is present, resulting in no eutectic crystal formation during solidification.« less

  4. Next-generation sequencing of 28 ALS-related genes in a Japanese ALS cohort.

    PubMed

    Nakamura, Ryoichi; Sone, Jun; Atsuta, Naoki; Tohnai, Genki; Watanabe, Hazuki; Yokoi, Daichi; Nakatochi, Masahiro; Watanabe, Hirohisa; Ito, Mizuki; Senda, Jo; Katsuno, Masahisa; Tanaka, Fumiaki; Li, Yuanzhe; Izumi, Yuishin; Morita, Mitsuya; Taniguchi, Akira; Kano, Osamu; Oda, Masaya; Kuwabara, Satoshi; Abe, Koji; Aiba, Ikuko; Okamoto, Koichi; Mizoguchi, Kouichi; Hasegawa, Kazuko; Aoki, Masashi; Hattori, Nobutaka; Tsuji, Shoji; Nakashima, Kenji; Kaji, Ryuji; Sobue, Gen

    2016-03-01

    We investigated the frequency and contribution of variants of the 28 known amyotrophic lateral sclerosis (ALS)-related genes in Japanese ALS patients. We designed a multiplex, polymerase chain reaction-based primer panel to amplify the coding regions of the 28 ALS-related genes and sequenced DNA samples from 257 Japanese ALS patients using an Ion Torrent PGM sequencer. We also performed exome sequencing and identified variants of the 28 genes in an additional 251 ALS patients using an Illumina HiSeq 2000 platform. We identified the known ALS pathogenic variants and predicted the functional properties of novel nonsynonymous variants in silico. These variants were confirmed by Sanger sequencing. Known pathogenic variants were identified in 19 (48.7%) of the 39 familial ALS patients and 14 (3.0%) of the 469 sporadic ALS patients. Thirty-two sporadic ALS patients (6.8%) harbored 1 or 2 novel nonsynonymous variants of ALS-related genes that might be deleterious. This study reports the first extensive genetic screening of Japanese ALS patients. These findings are useful for developing genetic screening and counseling strategies for such patients.

  5. Magnetism in Fe4Al13 and related FeAl intermetallics

    NASA Astrophysics Data System (ADS)

    Chi, Ji; Li, Yang; Gou, Weiping; Goruganti, V.; Rathnayaka, K. D. D.; Ross, Joseph H., Jr.

    2006-03-01

    We report the results of an experimental study of FeAl alloys, including Fe4Al13, FeAl2 and Fe2Al5. By using NMR, dc magnetic susceptibility, and specific heat, we found that Fe4Al13 and Fe2Al5 are non-magnetic with some dilute magnetic moments, while FeAl2 can be characterized as a concentrated local moment system. Fe4Al13 is a decagonal quasicrystal approximant with 102 atoms in its unit cell. The ^27Al NMR spin-lattice relaxation indicates a very narrow pseudogap in the electronic density of states [g(E)] in the vicinity of the Fermi energy. The observations could be fit assuming a parabolic variation of g(E), consistent with observations in other quasicrystals and approximants. NMR lineshape measurements also agree with this analysis, and show that the system is dilute-magnetic, in strong contrast to the FeAl2 ordered intermetallic. We use specific heat to analyze the dilute moment density. This work was supported by the Robert A. Welch Foundation, Grant No. A-1526, by the National Science Foundation (DMR-0103455), and by Texas A&M University through the Telecommunications and Informatics Task Force.

  6. Thermodynamics and surface properties of liquid Al-Ga and Al-Ge alloys

    NASA Astrophysics Data System (ADS)

    Anusionwu, B. C.; Adebayo, G. A.; Madu, C. A.

    2009-11-01

    The surface properties of Al-Ga and Al-Ge liquid alloys have been theoretically investigated at a temperature of 1100 K and 1220 K respectively. For the Al-Ga system, the quasi chemical model for regular alloy and a model for phase segregating alloy systems were applied, while for the Al-Ge system the quasi chemical model for regular and compound forming binary alloys were applied. In the case of Al-Ga, the models for the regular alloys and that for the phase segregating alloys produced the same value of order energy and same values of thermodynamic and surface properties, while for the Al-Ge system, the model for the regular alloy reproduced better the thermodynamic properties of the alloy. The model for the compound forming systems showed a qualitative trend with the measured values of the thermodynamic properties of the Al-Ge alloy and suggests the presence of a weak complex of the form Al2Ge3. The surface concentrations for the alloys show that Ga manifests some level of surface segregation in Al-Ga liquid alloy while the surface concentration of Ge in Al-Ge liquid alloy showed a near Roultian behavior below 0.8 atomic fraction of Ge.

  7. Clinical trials for neuroprotection in ALS.

    PubMed

    Siciliano, G; Carlesi, C; Pasquali, L; Piazza, S; Pietracupa, S; Fornai, F; Ruggieri, S; Murri, L

    2010-07-01

    Owing to uncertainty on the pathogenic mechanisms underlying motor neuron degeneration in amyotrophic lateral sclerosis (ALS) riluzole remains the only available therapy, with only marginal effects on disease survival. Here we review some of the recent advances in the search for disease-modifying drugs for ALS based on their putative neuroprotective effetcs. A number of more or less established agents have recently been investigated also in ALS for their potential role in neuroprotection and relying on antiglutamatergic, antioxidant or antiapoptotic strategies. Among them Talampanel, beta-lactam antibiotics, Coenzyme Q10, and minocycline have been investigated. Progress has also been made in exploiting growth factors for the treatment of ALS, partly due to advances in developing effective delivery systems to the central nervous system. A number of new therapies have also been identified, including a novel class of compounds, such as heat-shock protein co-inducers, which upregulate cell stress responses, and agents promoting autophagy and mitochondriogenesis, such as lithium and rapamycin. More recently, alterations of mRNA processing were described as a pathogenic mechanism in genetically defined forms of ALS, as those related to TDP-43 and FUS-TLS gene mutations. This knowledge is expected to improve our understanding of the pathogenetic mechanism in ALS and developing more effective therapies. PMID:20406180

  8. Modeling of precipitation in Al alloys

    SciTech Connect

    Asta, M.; Foiles, S.M.; Wolfer, W.G.

    1996-10-01

    Objective was the development of a computational model of precipitation from a supersaturated alloy solid solution. The model is based on the formalism of chemical-reaction-rate theory combined with classical descriptions of precipitate thermodynamic properties and a mean-field treatment of diffusion-limited growht and coarsening. For the case of precipitation of Al{sub 3}Sc in supersaturated Al-Sc alloys, it is demonstrated how the model can be used to calculate number densities and size distributions of precipitates as a function of aging time and temperature, including effects of continuous cooling and thermally generated point defects. Application of the model to a specific alloy system requires knowledge of diffusion data, point defect energetics, and thermodynamic properties for bulk phases and interphase interfaces. For interfaces and point defects, thermodynamic data can be difficult to measure and reliable values of defect free energies are often unavailable. For this reason, part of the efforts were devoted to applying semiempirical and first-principles atomistic techniques to the calculation of interfacial and point-defect thermodynamic properties. This report discusses applications for interphase interfaces in the Al-Ag, Al-Sc, and Al-Li alloy systems. We also describe atomistic work aimed at understanding the energetics of vacancy clusters in Al. These clusters serve as sinks for isolated vacancies during aging and their growth can lead to more complex defects, such as dislocation loops, that act as heterogeneous nucleation sites.

  9. Kinetic Monte Carlo of transport processes in Al/AlOx/Au-layers: Impact of defects

    NASA Astrophysics Data System (ADS)

    Weiler, Benedikt; Haeberle, Tobias; Gagliardi, Alessio; Lugli, Paolo

    2016-09-01

    Ultrathin films of alumina were investigated by a compact kMC-model. Experimental jV-curves from Al/AlOx/Au-junctions with plasma- and thermal-grown AlOx were fitted by simulated ones. We found dominant defects at 2.3-2.5 eV below CBM for AlOx with an effective mass mox ∗= 0.35 m0 and a barrier EB ,A l /A l O x≈2.8 eV in agreement with literature. The parameterization is extended to varying defect levels, defect densities, injection barriers, effective masses and the thickness of AlOx. Thus, dominant charge transport processes and implications on the relevance of defects are derived and AlOx parameters are specified which are detrimental for the operation of devices.

  10. Theoretical studies of Ni/sub 3/Al and NiAl with impurities

    SciTech Connect

    Chen, S.P.; Voter, A.F.; Boring, A.M.; Albers, R.C.; Hay, P.J.

    1988-01-01

    Intermetallic compound has been extensively studied because of their superior properties in strength, low creep rate, and high melting point. But most of the systems have room temperature ductility problems, like Ll/sub 2/ and B2 compounds. Both Ll/sub 2/ Ni/sub 3/Al and B2 NiAl exhibit intergranular fracture mode. Understanding grain boundaries in these materials is of particular importance since intergranular fracture limits the applicability of these otherwise promising material. In an effort trying to understand the fracture mechanism, we have used embedded atom potentials to study the properties of Ni/sub 3/Al and NiAl. We also consider the effect of boron, sulfur, and nickel segregation on the strength of grain boundaries in Ni/sub 3/Al and NiAl. 22 refs., 2 figs.

  11. Scattering induced by Al segregation in AlGaN/GaN heterostructures

    SciTech Connect

    Liu, Xiwen; Lu, Yanwu; Ji, Dong

    2015-08-17

    The effect of Al segregation near dislocations on the mobility of two-dimensional electron gas in AlGaN/GaN heterostructure-based high-electron-mobility transistors was investigated. Exponentially varied composition fluctuation was effective in describing Al segregation near dislocations when calculating scattering behavior. Mobility, which was limited by Al segregation surrounding dislocation lines, was calculated to be in the order of 10{sup 3} cm{sup 2}/Vs to 10{sup 6} cm{sup 2}/Vs. Results indicated that the mobility in AlGaN/GaN heterojunction was enhanced upon the reduction of dislocation density at low temperature. This study contributes to generating higher electron mobility in AlGaN/GaN heterojunctions.

  12. Microscopic Properties of Long-Period Ordering in Al-Rich TiAl Alloys

    NASA Astrophysics Data System (ADS)

    Hata, S.; Nakano, T.; Kuwano, N.; Itakura, M.; Matsumura, S.; Umakoshi, Y.

    2008-07-01

    The ordering mechanism of long-period superstructures (LPSs) in Al-rich TiAl alloys has been investigated by high-resolution transmission electron microscopy (HRTEM). The LPSs are classified in terms of arrangements of base clusters with different shapes and compositions formed in Ti-rich (002) layers of L10-TiAl matrix: square Ti4Al, fat rhombus Ti3Al, and lean rhombus Ti2Al type clusters. The HRTEM observations revealed that antiphase boundaries of long-range-ordered LPS domains and short-range-ordered microdomains are constructed by various space-filling arrangements of the base clusters. Such a microscopic property characterized by the base clusters and their arrangements is markedly analogous to that of the {left< {{text{1,1/2,0}}} rightrangle } * special-point ordering alloys such as Ni-Mo.

  13. Remarks on Peinado et al.'s Analysis of J3Gen

    PubMed Central

    Garcia-Alfaro, Joaquin; Herrera-Joancomartí, Jordi; Melià-Seguí, Joan

    2015-01-01

    Peinado et al. analyzed the security of the J3Gen pseudorandom number generator proposed by Melià-Seguí et al., and claimed weaknesses regarding its security properties. They also presented a deterministic attack based on the decimation of the J3Gen output sequences. We show that the assumptions made by Peinado et al. are not correct and that the proposed deterministic attack against J3Gen does not hold in practice. PMID:25781510

  14. Two-Phase (TiAl+TiCrAl) Coating Alloys for Titanium Aluminides

    NASA Technical Reports Server (NTRS)

    Brady, Michael P. (Inventor); Smialek, James L. (Inventor); Brindley, William J. (Inventor)

    1998-01-01

    A coating for protecting titanium aluminide alloys, including the TiAl gamma + Ti3Al (alpha(sub 2)) class, from oxidative attack and interstitial embrittlement at temperatures up to at least 1000 C. is disclosed. This protective coating consists essentially of titanium, aluminum. and chromium in the following approximate atomic ratio: Ti(41.5-34.5)Al(49-53)Cr(9.5-12.5)

  15. Temperature dependence diode parameters studies of Al/CuPc/n-Si/Al structure

    NASA Astrophysics Data System (ADS)

    Kumar, Ratnesh; Kaur, Ramneek; Sharma, Mamta; Kaur, Maninder; Tripathi, S. K.

    2015-08-01

    This paper presents the fabrication of Al/CuPc/n-Si/Al metal-organic-semiconductor diode. The copper phthalocyanine as organic layer is deposited on Si substrate by thermal evaporation technique. The temperature dependent current-voltage measurements are performed on Al/CuPc/n-Si structure. The important diode parameters i.e. the barrier height and ideality factor have been calculated. The temperature dependence of barrier height and ideality factor has been studied.

  16. The lowest ionization potentials of Al2

    NASA Technical Reports Server (NTRS)

    Bauschlicher, Charles W., Jr.; Barnes, Leslie A.; Taylor, Peter R.

    1988-01-01

    Potential curves for the lowest two electronic states (X 2 sigma g + and A 2 pi u) of Al2(+) were computed using complete active space SCF/multireference CI wave functions and large Gaussian basis sets. The lowest observable vertical ionization potential (to Al2(+) X 2 sigma g +) of the Al2 X 3 pi u ground state is calculated to occur around 6.1 eV, in excellent agreement with the experimental range of 6.0 to 6.42 eV obtained in recent cluster ionization studies by Cox and co-workers. The second vertical ionization potential (to Al2(+) A 2 pi u) occurs near 6.4 eV, also within the experimental range. The adiabatic IP of 5.90 eV is in good agreement with the value of 5.8 to 6.1 eV deduced by Hanley and co-workers from the difference in thresholds between collision induced dissociation processes of Al3(+). The computed IP values are somewhat larger than those deduced from branching ratios in cluster fragmentation experiments by Jarrold and co-workers. The observation of an ionization threshold below 6.42 eV is shown to be incompatible with an Al2 ground electronic state assignment of 3 sigma g -, but the separation between the two lowest states of Al2 is so small that it is likely that both are populated in the experiments, so that this does not provide unambiguous support for the recent theoretical assignment of the ground state as 3 pi u.

  17. Chemical trend of superconducting transition temperature in hole-doped delafossite of CuAlO2, AgAlO2 and AuAlO2

    NASA Astrophysics Data System (ADS)

    Nakanishi, Akitaka; Katayama-Yoshida, Hiroshi

    2012-12-01

    We have performed the first-principles calculations about the superconducting transition temperature Tc of hole-doped delafossite CuAlO2, AgAlO2 and AuAlO2. Calculated Tc are about 50 K (CuAlO2), 40 K (AgAlO2) and 3 K(AuAlO2) at maximum in the optimum hole-doping concentration. The low Tc of AuAlO2 is attributed to the weak electron-phonon interaction caused by the low covalency and heavy atomic mass.

  18. High temperature deformation of NiAl and CoAl

    NASA Technical Reports Server (NTRS)

    Nix, W. D.

    1982-01-01

    The high temperature mechanical properties of the aluminides are reviewed with respect to their potential as high temperature structural materials. It is shown that NiAl and CoAl are substantially stronger than the pure metals Ni and Co at high temperatures and approach the strength of some superalloys, particularly when those superalloys are tested in "weak" directions. The factors that limit and control the high temperature strengths of NiAl and CoAl are examined to provide a basis for the development of intermetallic alloys of this type.

  19. Small Al clusters. II - Structure and binding in Al(n) (n = 2-6, 13)

    NASA Technical Reports Server (NTRS)

    Pettersson, Lars G. M.; Bauschlicher, Charles W., Jr.; Halicioglu, Timur

    1987-01-01

    The structure and stability of aluminum clusters containing up to six atoms have been studied using correlated wave functions and extended basis sets. The lowest energy structure is planar for Al4 and Al5, but three dimensional for Al6. The icosahedral, hcp, fcc, and two planar structures of Al13 were considered at the SCF level. The lowest energy structure is the icosahedron, but the planar structures are fairly low lying even in this case. A simplified description using two- and three-body interaction potentials is found to agree well with the ab initio structures and binding energies.

  20. Synthesis of core–shell AlOOH hollow nanospheres by reacting Al nanoparticles with water

    NASA Astrophysics Data System (ADS)

    Lozhkomoev, A. S.; Glazkova, E. A.; Bakina, O. V.; Lerner, M. I.; Gotman, I.; Gutmanas, E. Y.; Kazantsev, S. O.; Psakhie, S. G.

    2016-05-01

    A novel route for the synthesis of boehmite nanospheres with a hollow core and the shell composed of highly crumpled AlOOH nanosheets by oxidizing Al nanopowder in pure water under mild processing conditions is described. The stepwise events of Al transformation into boehmite are followed by monitoring the pH in the reaction medium. A mechanism of formation of hollow AlOOH nanospheres with a well-defined shape and crystallinity is proposed which includes the hydration of the Al oxide passivation layer, local corrosion of metallic Al accompanied by hydrogen evolution, the rupture of the protective layer, the dissolution of Al from the particle interior and the deposition of AlOOH nanosheets on the outer surface. In contrast to previously reported methods of boehmite nanoparticle synthesis, the proposed method is simple, and environmentally friendly and allows the generation of hydrogen gas as a by-product. Due to their high surface area and high, slit-shaped nanoporosity, the synthesized AlOOH nanostructures hold promise for the development of more effective catalysts, adsorbents, vaccines and drug carriers.

  1. Elastic and piezoelectric properties of AlN and LiAlO2 single crystals.

    PubMed

    Sotnikov, Andrey; Schmidt, Hagen; Weihnacht, Manfred; Smirnova, Elena; Chemekova, Tatiana; Makarov, Yuri

    2010-04-01

    We have successfully grown high-quality AlN piezoelectric single crystal using the sublimation technique. Transparent crack-free boules of approximately 15 mm in diameter and 25 mm in length along the [0001] direction were obtained, with coloring from amber to dark brown depending on growth temperature. Full sets of material parameters of grown AlN and commercially available LiAlO(2) bulk crystals were measured at room temperature. Temperature coefficients of the material parameters of LiAlO(2) were also obtained in a temperature range from -70 to +50 degrees C.

  2. Synthesis of core-shell AlOOH hollow nanospheres by reacting Al nanoparticles with water

    NASA Astrophysics Data System (ADS)

    Lozhkomoev, A. S.; Glazkova, E. A.; Bakina, O. V.; Lerner, M. I.; Gotman, I.; Gutmanas, E. Y.; Kazantsev, S. O.; Psakhie, S. G.

    2016-05-01

    A novel route for the synthesis of boehmite nanospheres with a hollow core and the shell composed of highly crumpled AlOOH nanosheets by oxidizing Al nanopowder in pure water under mild processing conditions is described. The stepwise events of Al transformation into boehmite are followed by monitoring the pH in the reaction medium. A mechanism of formation of hollow AlOOH nanospheres with a well-defined shape and crystallinity is proposed which includes the hydration of the Al oxide passivation layer, local corrosion of metallic Al accompanied by hydrogen evolution, the rupture of the protective layer, the dissolution of Al from the particle interior and the deposition of AlOOH nanosheets on the outer surface. In contrast to previously reported methods of boehmite nanoparticle synthesis, the proposed method is simple, and environmentally friendly and allows the generation of hydrogen gas as a by-product. Due to their high surface area and high, slit-shaped nanoporosity, the synthesized AlOOH nanostructures hold promise for the development of more effective catalysts, adsorbents, vaccines and drug carriers.

  3. Synthesis of core-shell AlOOH hollow nanospheres by reacting Al nanoparticles with water.

    PubMed

    Lozhkomoev, A S; Glazkova, E A; Bakina, O V; Lerner, M I; Gotman, I; Gutmanas, E Y; Kazantsev, S O; Psakhie, S G

    2016-05-20

    A novel route for the synthesis of boehmite nanospheres with a hollow core and the shell composed of highly crumpled AlOOH nanosheets by oxidizing Al nanopowder in pure water under mild processing conditions is described. The stepwise events of Al transformation into boehmite are followed by monitoring the pH in the reaction medium. A mechanism of formation of hollow AlOOH nanospheres with a well-defined shape and crystallinity is proposed which includes the hydration of the Al oxide passivation layer, local corrosion of metallic Al accompanied by hydrogen evolution, the rupture of the protective layer, the dissolution of Al from the particle interior and the deposition of AlOOH nanosheets on the outer surface. In contrast to previously reported methods of boehmite nanoparticle synthesis, the proposed method is simple, and environmentally friendly and allows the generation of hydrogen gas as a by-product. Due to their high surface area and high, slit-shaped nanoporosity, the synthesized AlOOH nanostructures hold promise for the development of more effective catalysts, adsorbents, vaccines and drug carriers. PMID:27053603

  4. Al-matrix composite materials reinforced by Al-Cu-Fe particles

    NASA Astrophysics Data System (ADS)

    Bonneville, J.; Laplanche, G.; Joulain, A.; Gauthier-Brunet, V.; Dubois, S.

    2010-07-01

    Al-matrix material composites were produced using hot isostatic pressing technique, starting with pure Al and icosahedral (i) Al-Cu-Fe powders. Depending on the processing temperature, the final reinforcement particles are either still of the initial i-phase or transformed into the tetragonal ω-Al00.70Cu0.20Fe0.10 crystalline phase. Compression tests performed in the temperature range 293K - 823K on the two types of composite, i.e. Al/i and Al/ω, indicate that the flow stress of both composites is strongly temperature dependent and exhibit distinct regimes with increasing temperature. Differences exist between the two composites, in particul ar in yield stress values. In the low temperatureregime (T <= 570K), the yield stress of the Al/ω composite is nearly 75% higher than that of the Al/i composite, while for T > 570K both composites exhibit similar yield stress values. The results are interpreted in terms of load transfer contribution between the matrix and the reinforcement particles and elementary dislocation mechanisms in the Al matrix.

  5. The new structure type Gd3Ni7Al14.

    PubMed

    Pukas, Svitlana; Gladyshevskii, Roman

    2015-11-01

    The crystal structure of Gd3Ni7Al14 (trigadolinium heptanickel tetradecaaluminide) belongs to a family of two-layer structures and can be described as an assembly of interpenetrating centred straight prisms. For the Ni atoms, trigonal prisms (Al4Gd2 and Al6) are observed, the Al atoms are inside tetragonal (Ni2Al2Gd4, Ni2Al4Gd2, Al4Gd4, Ni4Al4 and Al8) and pentagonal (Ni4Al6 and Al10) prisms, while the Gd atoms are at the centres of pentagonal (Ni4Al6) and hexagonal (Ni4Al8) prisms. In each case, the true coordination polyhedron is a capped prism, also including atoms from the same layer. The structural features of Gd3Ni7Al14 are similar to those of the intermetallides PrNi2Al3 and ZrNiAl. In all these structures, Ni-centred trigonal prisms form infinite columns via common triangular faces. The columns share prism edges and form a three-dimensional framework with six-membered rings in the (001) plane in the case of the PrNi2Al3 and ZrNiAl types. In the case of Gd3Ni7Al14, six-membered rings are also observed, but only two-thirds of the rings are interconnected via prism edges. PMID:26524174

  6. The new structure type Gd3Ni7Al14.

    PubMed

    Pukas, Svitlana; Gladyshevskii, Roman

    2015-11-01

    The crystal structure of Gd3Ni7Al14 (trigadolinium heptanickel tetradecaaluminide) belongs to a family of two-layer structures and can be described as an assembly of interpenetrating centred straight prisms. For the Ni atoms, trigonal prisms (Al4Gd2 and Al6) are observed, the Al atoms are inside tetragonal (Ni2Al2Gd4, Ni2Al4Gd2, Al4Gd4, Ni4Al4 and Al8) and pentagonal (Ni4Al6 and Al10) prisms, while the Gd atoms are at the centres of pentagonal (Ni4Al6) and hexagonal (Ni4Al8) prisms. In each case, the true coordination polyhedron is a capped prism, also including atoms from the same layer. The structural features of Gd3Ni7Al14 are similar to those of the intermetallides PrNi2Al3 and ZrNiAl. In all these structures, Ni-centred trigonal prisms form infinite columns via common triangular faces. The columns share prism edges and form a three-dimensional framework with six-membered rings in the (001) plane in the case of the PrNi2Al3 and ZrNiAl types. In the case of Gd3Ni7Al14, six-membered rings are also observed, but only two-thirds of the rings are interconnected via prism edges.

  7. Evidence that 26Al Did Not Melt Asteroids

    NASA Astrophysics Data System (ADS)

    Wasson, J. T.

    2016-08-01

    26Al/27Al initial ratios in achondrites are much lower than expected if 26Al was the only heat source responsible for melting the parental materials. Impacts provided a substantial fraction of the heat.

  8. Exothermic reactions in Co/Al nanolaminates

    NASA Astrophysics Data System (ADS)

    Adams, D. P.; Hodges, V. C.; Bai, M. M.; Jones, E.; Rodriguez, M. A.; Buchheit, T.; Moore, J. J.

    2008-08-01

    Vapor-deposited Co/Al nanolaminates having a net equiatomic stoichiometry exhibited rapid, high-temperature synthesis. When ignited locally, 7.5-μm-thick Co/Al foils were characterized by self-sustained propagating reactions with flame front speeds between ˜0.5 and 9 m/s. Speed was largely affected by bilayer thickness and premixed volume fraction, consistent with previous studies of other exothermic multilayers. Cobalt aluminide foils reacted by self-propagating synthesis developed a variety of rough surface morphologies characterized by a large amplitude (peak-to-valley ˜1.0 μm), multiperiod, wavelike structure. High-temperature reaction was also stimulated by rapid global heating. Tests revealed low ignition temperatures (Tig)˜240-460 °C compared with previous Co-Al powder reactant experiments. Ignition temperature was influenced by bilayer thickness. All foils ignited by global heating and those reacted in a self-propagating mode developed a single-phase B2 (CsCl-type) crystal structure. Thick Co/Al nanolaminates were used successfully to join a few different materials including metalized Al2O3 (by soldering) and polyetheretherketone (by direct attachment).

  9. No effect of hypergravity on adult rat ventral horn neuron size or SDH activity

    NASA Technical Reports Server (NTRS)

    Roy, R. R.; Ishihara, A.; Moran, M. M.; Wade, C. E.; Edgerton, V. R.

    2001-01-01

    BACKGROUND: Spaceflights of short duration (approximately 2 wk) result in adaptations in the size and/or metabolic properties of a select population of motoneurons located in the lumbosacral region of the rat spinal cord. A decrease in succinate dehydrogenase (SDH, an oxidative marker enzyme) activity of moderately sized (500-800 microm2) motoneurons in the retrodorsolateral region of the spinal cord (L6) has been observed after a 14-d flight. HYPOTHESIS: Our hypothesis was that exposure to short-term hypergravity would result in adaptations in the opposite direction, reflecting a continuum of morphological and biochemical responses in the spinal motoneurons from zero gravity to hypergravity. METHODS: Young, male rats were centrifuged at either 1.5 or 2.0 G for 2 wk. The size and SDH activity of a population of motoneurons in the retrodorsolateral region of the spinal cord (L5) were determined and compared with age-matched rats maintained at 1.0 G. The absolute and relative (to body weight) masses of the soleus, gastrocnemius, adductor longus and tibialis anterior muscles were compared among the three groups. RESULTS: There were no effects of either hypergravity intervention on the motoneuron properties. Rats maintained under hypergravity conditions gained less body mass than rats kept at 1.0 G. For the 1.5 and 2.0 G groups, the muscle absolute mass was smaller and relative mass similar to that observed in the 1.0 G rats, except for the adductor longus. The adductor longus absolute mass was similar to and the relative mass larger in both hypergravity groups than in the 1.0 G group. CONCLUSIONS: Our hypothesis was rejected. The findings suggest that rat motoneurons are more responsive to short-term chronic exposure to spaceflight than to hypergravity conditions.

  10. Oscillatory surface relaxations in Ni, Al, and their ordered alloys

    SciTech Connect

    Chen, S.P.; Voter, A.F.; Srolovitz, D.J.

    1986-09-15

    Results from simulations of Ni, Al, Ni/sub 3/Al, and NiAl show long-range, oscillatory surface relaxations that decay exponentially into the bulk. Pure fcc Ni and Al have oscillation periods that are close to the nearest-neighbor distance, independent of crystal face. This is shown to be due to surface smoothing and steric effects. In Ni/sub 3/Al and NiAl, the surface planes are rippled, with the Ni-Ni and Al-Al interlayer spacings oscillating 180/sup 0/ out of phase. Very good agreement between our results and experimentally measured atomic relaxations is obtained.

  11. The mechanical properties of FeAl

    SciTech Connect

    Baker, I.; George, E.P.

    1996-12-31

    Only in the last few years has progress been made in obtaining reproducible mechanical properties data for FeAl. Two sets of observations are the foundation of this progress. The first is that the large vacancy concentrations that exist in FeAl at high temperature are easily retained at low temperature and that these strongly affect the low-temperature mechanical properties. The second is that RT ductility is adversely affected by water vapor. Purpose of this paper is not to present a comprehensive overview of the mechanical properties of FeAl but rather to highlight our understanding of key phenomena and to show how an understanding of the factors which control the yield strength and fracture behavior has followed the discovery of the above two effects. 87 refs, 9 figs.

  12. Boron strengthening in FeAl

    SciTech Connect

    Baker, I.; Li, X.; Xiao, H.; Klein, O.; Nelson, C.; Carleton, R.L.; George, E.P.

    1998-11-01

    The effect of boron on the strength of B2-structured FeAl is considered as a function of composition, grain size and temperature. Boron does not affect the concentrations of antisite atoms or vacancies present, with the former increasing and the latter decreasing with increasing deviation from the stoichiometric composition. When vacancies are absent, the strength increase per at. % B per unit lattice strain, {Delta}{sigma}/({Delta}c x {epsilon}) increases with increasing aluminum concentration, but when vacancies are present (>45 at. % Al), {Delta}{sigma}/({Delta}c x {epsilon}) decreases again. Boron increases grain size strengthening in FeAl. B strengthening is roughly independent of temperature up to the yield strength peak but above the point, when diffusion-assisted deformation occurs, boron strengthening increases dramatically.

  13. [Al-Biruni--a universal scientist].

    PubMed

    Kujundzić, E; Masić, I

    1999-01-01

    Al-Biruni's was of Persian descent. He was born in Horesmiya and had studied mathematics, history and medicine. Acquiring knowledge from these sciences, he wrote an outstanding work on chronology of several nations and devoted it to Ziyarit ruler Kabus. He made a chronological overview of calendars from many nations, including Persians, Greeks, Egyptians, Jews, Melkitian and Nestorian Christians, Sabeyaans as well as the old Arabs. Data presented in the work, according to the later authors, were taken from very reliable sources. He was contemporary of Ibn-Sina, and thanks to their friendship, they have discussed very much miscellaneous topics. He belonged to the group of scholars, taken by Gaznevian Soultan Mahmud to a long journey to India. Afterwards Al-Biruni wrote and published detailed work "Description of India"--a work on cultural history of India. Due to excellent abilities of Al-Biruni as a philosopher and scholar, there are still significant and reliable notes about buddhistic philosophy, structure of castes and Brahmans' life style. In this Al-Biruni's masterpiece, there are many comparative analysis of Suffism and certain Indian philosophical methods. Al-Biruni's most important work is "Pharmacopoeia"--"Kitab al-saydala", which brilliantly describes all medicaments. This work has been published in many languages. He also wrote few works on astronomy and astrology. In those works he has explained some astrological events through scientific approach in a such peculiar way that nobody has ever explained before. He was also interested in sciences like geology, mineralology, geography, mathematics, psychology and many others. PMID:10386051

  14. Individual two level fluctuators in the tunneling conductance of Al/AlOx/Al Josephson junctions for superconducting qubits

    NASA Astrophysics Data System (ADS)

    Nugroho, Christopher; Orlyanchik, Vladimir; van Harlingen, Dale

    2014-03-01

    Two level system (TLS) defects in AlOx tunnel barriers can lead to low-frequency 1 / f critical current noise and losses in coherent superconducting circuits. Understanding the nature of these defects and how to eliminate them are critical in order to achieve ultra-long coherence times. We present measurements of the tunneling conductance of ultrasmall, A <(100nm) 2 , Al/AlOx/Al shadow evaporated junctions. The tunneling conductance of these junctions exhibits several isolated TLSs, which permitted the detailed analysis of the individual switching rates and behavior of the TLSs. We have studied the thermal activation behavior of these TLSs, and in some cases observe a crossover into quantum-limited tunneling at lower temperatures. Tracking the TLS switching rates as a function of the applied voltage bias provides an estimate of the TLS charge dipole moment. In some quantum tunneling limited TLSs we have observed a non-equilibrium enhancement of the switching rates that cannot be explained by simple dissipative heating of the TLSs. Further investigations into these TLS defects may lead to the identification of their physical origins and strategies to eliminate them. Research funded by the Intelligence Advanced Research Projects Activity (IARPA).

  15. Complementary and Alternative Therapies in ALS

    PubMed Central

    Bedlack, Richard S.; Joyce, Nanette; Carter, Gregory T.; Pagononi, Sabrina; Karam, Chafic

    2015-01-01

    Synopsis Given the severity of their illness and lack of effective disease modifying agents, it is not surprising that most patients with ALS consider trying complementary and alternative therapies. Some of the most commonly considered alternative therapies include special diets, nutritional supplements, cannabis, acupuncture, chelation and energy healing. This chapter reviews these in detail. We also describe 3 models by which physicians may frame discussions about alternative therapies: paternalism, autonomy and shared decision making. Finally, we review a program called ALSUntangled which using shared shared decision making to review alternative therapies for ALS. PMID:26515629

  16. A Comment on Eerland et al. (2016).

    PubMed

    Hart, William

    2016-03-01

    People imagine criminal behavior in greater detail and ascribe more blame to criminals when a description of a crime is written using the imperfective verb aspect (Hart & Albarracín, 2011, Experiment 3). An initiative to reproduce these findings conducted by Eerland et al. (2016) yielded a lack of replication. Eerland et al. have suggested that the original effect was likely driven by a Type I error produced by methodological aspects of the experiment, including low sample size. Recent conceptual replications of Hart and Albarracín's effect (Sherrill, Eerland, Zwaan, & Magliano, 2015), however, might imply the effect could be contingent on sample characteristics. PMID:26993281

  17. Fabrication and Characterization of AL-AL4C3 Nanocomposite by Mechanical Alloying

    NASA Astrophysics Data System (ADS)

    Mohammad Sharifi, E.; Enayati, M. H.; Karimzadeh, F.

    Aluminum carbide (Al4C3) seems to be an ideal reinforcement for producing aluminum matrix composites. Al4C3 has high hardness and shear strength as well as a high melting point. The dispersion of Al4C3 particles in the matrix produces a pinning effect that reduces aluminum grain growth, which improves the mechanical properties. In this study, aluminum powders were mixed with 4.5 wt.% graphite and mechanically alloyed using a high-energy ball mill in order to produce Al-Al4C3 nanocomposite. The structural evaluation of powder particles after different milling times was studied by X-ray diffractometry, scanning electron microscopy and microhardness measurements. The aluminum crystallite size estimated with broadening of XRD peaks by Williamson-Hall formula. XRD results suggested that the grain size of aluminum decreased to nanometer range (30 nm) during ball milling. No Al4C3 formed during the mechanical alloying process. Milled powders were then annealed at 300-600 °C for 1 h under argon atmosphere. Annealing at temperatures higher than 300 °C led to formation of Al4C3 phase which increased as annealing temperature increased. Aluminum grain size remained in nanometer range after annealing process. The microhardness of powder particles increased after annealing. Both effects are due to the formation of nanosized Al4C3 particles.

  18. Melting, Processing, and Properties of Disordered Fe-Al and Fe-Al-C Based Alloys

    NASA Astrophysics Data System (ADS)

    Satya Prasad, V. V.; Khaple, Shivkumar; Baligidad, R. G.

    2014-09-01

    This article presents a part of the research work conducted in our laboratory to develop lightweight steels based on Fe-Al alloys containing 7 wt.% and 9 wt.% aluminum for construction of advanced lightweight ground transportation systems, such as automotive vehicles and heavy-haul truck, and for civil engineering construction, such as bridges, tunnels, and buildings. The melting and casting of sound, porosity-free ingots of Fe-Al-based alloys was accomplished by a newly developed cost-effective technique. The technique consists of using a special flux cover and proprietary charging schedule during air induction melting. These alloys were also produced using a vacuum induction melting (VIM) process for comparison purposes. The effect of aluminum (7 wt.% and 9 wt.%) on melting, processing, and properties of disordered solid solution Fe-Al alloys has been studied in detail. Fe-7 wt.% Al alloy could be produced using air induction melting with a flux cover with the properties comparable to the alloy produced through the VIM route. This material could be further processed through hot and cold working to produce sheets and thin foils. The cold-rolled and annealed sheet exhibited excellent room-temperature ductility. The role of carbon in Fe-7 wt.% Al alloys has also been examined. The results indicate that Fe-Al and Fe-Al-C alloys containing about 7 wt.% Al are potential lightweight steels.

  19. Transport mechanisms of leakage current in Al2O3/InAlAs MOS capacitors

    NASA Astrophysics Data System (ADS)

    Jin, Chengji; Lu, Hongliang; Zhang, Yimen; Zhang, Yuming; Guan, He; Wu, Lifan; Lu, Bin; Liu, Chen

    2016-09-01

    An Al2O3 layer is inserted between the InAlAs layer and the metal gate in InAs/AlSb HEMTs to suppress the leakage current. The transport mechanisms of leakage current in Al2O3/InAlAs metal-oxide-semiconductor (MOS) capacitors at both positive and negative biases at different temperatures ranging from 10 °C to 70 °C are investigated. For positive bias, the leakage current is dominated by Schottky emission. Based on the fitted straight lines, the relative dielectric constant of Al2O3 and the barrier height between Al2O3 and InAlAs are extracted. However, for negative bias, the leakage current is dominated by Frenkel-Poole (F-P) emission and the depth of the trap energy level from the conduction band (ϕt) is extracted. Furthermore, authors explain the reason why the dominating mechanisms at positive and negative biases are different.

  20. Electronic circuits having NiAl and Ni.sub.3 Al substrates

    DOEpatents

    Deevi, Seetharama C.; Sikka, Vinod K.

    1999-01-01

    An electronic circuit component having improved mechanical properties and thermal conductivity comprises NiAl and/or Ni.sub.3 Al, upon which an alumina layer is formed prior to applying the conductive elements. Additional layers of copper-aluminum alloy or copper further improve mechanical strength and thermal conductivity.

  1. Directional Solidification and Mechanical Properties of NiAl-NiAlTa Alloys

    NASA Technical Reports Server (NTRS)

    Johnson, D. R.; Chen, X. F.; Oliver, B. F.; Noebe, R. D.; Whittenberger, J. D.

    1995-01-01

    Directional solidification of eutectic alloys is a promising technique for producing in-situ composite materials exhibiting a balance of properties. Consequently, the microstructure, creep strength and fracture toughness of directionally solidified NiAl-NiAlTa alloys were investigated. Directional solidification was performed by containerless processing techniques to minimize alloy contamination. The eutectic composition was found to be NiAl-15.5 at% Ta and well-aligned microstructures were produced at this composition. A near-eutectic alloy of NiAl-14.5Ta was also investigated. Directional solidification of the near-eutectic composition resulted in microstructures consisting of NiAl dendrites surrounded by aligned eutectic regions. The off-eutectic alloy exhibited promising compressive creep strengths compared to other NiAl-based intermetallics, while preliminary testing indicated that the eutectic alloy was competitive with Ni-base single crystal superalloys. The room temperature toughness of these two-phase alloys was similar to that of polycrystalline NiAl even with the presence of the brittle Laves phase NiAlTa.

  2. Characterization of nanophase Al-oxide/Al powders by electron energy-loss spectroscopy.

    PubMed

    Fernández; Sánchez-López; Caballero; Martin; Vacher; Ponsonnet

    1998-08-01

    Al nanoparticles were prepared by the inert gas condensation method. After passivation with oxygen and air exposure we obtained a powdered sample of an Al-oxide/Al nanocomposite material. In the present paper we describe the use of the electron energy-loss spectroscopy (EELS) technique in a transmission electron microscope to characterize such nanostructured powders compared with a microcrystalline commercial aluminium foil. Energy-filtered images showed the presence of an alumina overlayer of approximately 4 nm covering the aluminium nanoparticles (23 nm in diameter). EELS analysis enabled us to determine the total amount of Al2O3 and metallic Al and the structure of the alumina passivation overlayer in the sample. In particular, the extended energy-loss fine structure analysis of the data showed a major presence of Al tetrahedrally coordinated with oxygen in the alumina passivation layer of Al nanoparticles instead of the octahedral coordination found for a conventional Al foil. This surprising effect has been attributed to the nanoscopic character of the grains. The analysis of the electron-loss near-edge structure also determines the presence of a certain degree of aggregation in this kind of powdered sample as result of the coalescence of the nanocrystalline grains. The procedure presented here may have the potential to solve other problems during characterization of nanostructured materials.

  3. AlN homoepitaxial growth on sublimation-AlN substrate by low-pressure HVPE

    NASA Astrophysics Data System (ADS)

    Nomura, Takuya; Okumura, Kenta; Miyake, Hideto; Hiramatsu, Kazumasa; Eryu, Osamu; Yamada, Yoichi

    2012-07-01

    Crack-free thick AlN layers with low impurity concentrations were grown on free-standing AlN substrates fabricated by a sublimation method. Cracks due to tensile stresses were generated in the overgrowth layer when using on-axis AlN (0 0 0 1) substrates, as indicated by Raman scattering spectroscopy. In contrast, cracks were not generated when using 5° off-angle AlN (0 0 0 1) substrates. High crystalline quality was indicated by X-ray rocking curve (XRC) analysis. The full width at half maximum (FWHM) values of the (0 0 0 2) and (1 0-1 0) diffractions were 277 and 306 arcsec, respectively. Secondary ion mass spectrometry (SIMS) measurements indicated that the Si and C impurity concentrations were reduced to half of those in the sublimation-grown AlN substrates.

  4. Al/sub 2/O/sub 3/ adherence on CoCrAl alloys

    SciTech Connect

    Kingsley, L.M.

    1980-04-01

    Adherence of protective oxides on NiCrAl and CoCrAl superalloys has been promoted by a dispersion of a highly oxygen reactive element or its oxide being produced within the protection system. Two aspects of this subject are investigated here: the use of Al/sub 2/O/sub 3/ as both the dispersion and protective oxide; and the production of an HfO/sub 2/ dispersion while simultaneously aluminizing the alloy. It was found that an Al/sub 2/O/sub 3/ dispersion will act to promote the adherence of an external scale of Al/sub 2/O/sub 3/ to a degree comparable to previously tested dispersions and an HfO/sub 2/ dispersion comparable to that produced by a Rhines pack treatment is produced during aluminization.

  5. Bonding characters of Al-containing bulk metallic glasses studied by 27Al NMR.

    PubMed

    Xi, X K; Sandor, M T; Wang, H J; Wang, J Q; Wang, W H; Wu, Y

    2011-03-23

    We report very small (27)Al metallic shifts in a series of Cu-Zr-Al bulk metallic glasses. This observation and the Korringa type of spin-lattice relaxation behavior suggest that s-character wavefunctions weakly participate in bonding and opens the possibility of enhanced covalency (pd hybridization) with increasing Al concentration, in good agreement with elastic constants and hardness measurements. Moreover, ab initio calculations show that this bonding character originates from the strong Al 3p band and Zr 4d band hybridization since their atomic energy levels are closer to each other while the Al 3s band is localized far below the Fermi level. This study might provide a chemical view for understanding flow and fracture mechanisms of these bulk glass-forming alloys.

  6. CVD Fiber Coatings for Al2O3/NiAl Composites

    NASA Technical Reports Server (NTRS)

    Boss, Daniel E.

    1995-01-01

    While sapphire-fiber-reinforced nickel aluminide (Al2O3/NiAl) composites are an attractive candidate for high-temperature structures, the significant difference in the coefficient of thermal expansion between the NiAl matrix and the sapphire fiber creates substantial residual stresses in the composite. This study seeks to produce two fiber-coating systems with the potential to reduce the residual stresses in the sapphire/NiAl composite system. Chemical vapor deposition (CVD) was used to produce both the compensating and compliant-fiber coatings for use in sapphire/NiAl composites. A special reactor was designed and built to produce the FGM and to handle the toxic nickel precursors. This process was successfully used to produce 500-foot lengths of fiber with coating thicknesses of approximately 3 microns, 5 microns, and 10 microns.

  7. Formation of gamma'-Ni3Al via the Peritectoid Reaction: gamma plus beta (+Al2O3) equals gamma'(+Al2O3)

    NASA Technical Reports Server (NTRS)

    Copland, Evan

    2008-01-01

    The activities of Al and Ni were measured using multi-cell Knudsen effusion-cell mass spectrometry (multi-cell KEMS), over the composition range 8 - 32 at.%Al and temperature range T = 1400 - 1750 K in the Ni-Al-O system. These measurements establish that equilibrium solidification of gamma'-Ni3Al-containing alloys occurs by the eutectic reaction, L (+ Al2O3) = gamma + beta (+ Al2O3), at 1640 plus or minus 1 K and a liquid composition of 24.8 plus or minus 0.2 at.%Al (at an unknown oxygen content). The {gamma + beta + Al2O3} phase field is stable over the temperature range 1633 - 1640 K, and gamma'-Ni3Al forms via the peritectiod, gamma + beta (+ Al2O3) = gamma'(+ Al2O3), at 1633 plus or minus 1 K. This behavior is inconsistent with the current Ni-Al phase diagram and a new diagram is proposed. This new Ni-Al phase diagram explains a number of unusual steady state solidification structures reported previously and provides a much simpler reaction scheme in the vicinity of the gamma'-Ni3Al phase field.

  8. Formation of gamma(sup prime)-Ni3Al via the Peritectoid Reaction: gamma + beta (+ Al2O3)=gamma(sup prime)(+ Al2O3)

    NASA Technical Reports Server (NTRS)

    Copeland, Evan

    2008-01-01

    The activities of Al and Ni were measured using multi-cell Knudsen effusion-cell mass spectrometry (multi-cell KEMS), over the composition range 8-32 at.%Al and temperature range T=1400-1750 K in the Ni-Al-O system. These measurements establish that equilibrium solidification of gamma(sup prime)-Ni3Al-containing alloys occurs by the eutectic reaction, L (+ Al2O3)=gamma + Beta(+ Al2O3), at 1640 +/- 1 K and a liquid composition of 24.8 +/- 0.2 at.%al (at an unknown oxygen content). The {gamma + Beta (+Al2O3} phase field is stable over the temperature range 1633-1640 K, and gamma(sup prime)-Ni3Al forms via the peritectoid, gamma + Beta (+ Al2O3)=gamma(sup prime) (+ Al2O3), at 1633 +/- 1 K. This behavior is consistent with the current Ni-Al phase diagram and a new diagram is proposed. This new Ni-Al phase diagram explains a number of unusual steady-state solidification structures reported previously and provides a much simpler reaction scheme in the vicinity of the gamma(sup prime)-Ni2Al phase field.

  9. Effect of stress on the Al composition evolution in AlGaN grown using metal organic vapor phase epitaxy

    NASA Astrophysics Data System (ADS)

    He, Chenguang; Qin, Zhixin; Xu, Fujun; Zhang, Lisheng; Wang, Jiaming; Hou, Mengjun; Zhang, Shan; Wang, Xinqiang; Ge, Weikun; Shen, Bo

    2016-05-01

    Two series of AlGaN samples with different stresses were designed to investigate the effect of stress on the Al composition. X-ray diffraction reciprocal space mapping (XRD RSM) demonstrated that the AlGaN epilayers with different stresses have large Al composition differences despite the same growth conditions. The largest Al composition difference reached up to 21.3%, which was also confirmed using secondary ion mass spectroscopy (SIMS). This result is attributed to a large stress discrepancy in the AlGaN epilayers. Finally, the dependences of the solid-phase Al composition on the gas-phase Al composition under different stresses were systematically analyzed.

  10. Microstructure of Ni-Al powder and Ni-Al composite coatings prepared by twin-wire arc spraying

    NASA Astrophysics Data System (ADS)

    Wang, Ji-xiao; Wang, Gui-xian; Liu, Jing-shun; Zhang, Lun-yong; Wang, Wei; Li, Ze; Wang, Qi-xiang; Sun, Jian-fei

    2016-07-01

    Ni-Al powder and Ni-Al composite coatings were fabricated by twin-wire arc spraying (TWAS). The microstructures of Ni-5wt%Al powder and Ni-20wt%Al powder were characterized by scanning electronic microscopy (SEM) and energy dispersive spectroscopy (EDS). The results showed that the obtained particle size ranged from 5 to 50 μm. The morphology of the Ni-Al powder showed that molten particles were composed of Ni solid solution, NiAl, Ni3Al, Al2O3, and NiO. The Ni-Al phase and a small amount of Al2O3 particles changed the composition of the coating. The microstructures of the twin-wire-arc-sprayed Ni-Al composite coatings were characterized by SEM, EDS, X-ray diffraction (XRD), and transmission electron microscopy (TEM). The results showed that the main phase of the Ni-5wt%Al coating consisted of Ni solid solution and NiAl in addition to a small amount of Al2O3. The main phase of the Ni-20wt%Al coating mainly consisted of Ni solid solution, NiAl, and Ni3Al in addition to a small amount of Al and Al2O3, and NiAl and Ni3Al intermetallic compounds effectively further improved the final wear property of the coatings. TEM analysis indicated that fine spherical NiAl3 precipitates and a Ni-Al-O amorphous phase formed in the matrix of the Ni solid solution in the original state.

  11. Ternary Dy-Er-Al magnetic refrigerants

    DOEpatents

    Gschneidner, Jr., Karl A.; Takeya, Hiroyuki

    1995-07-25

    A ternary magnetic refrigerant material comprising (Dy.sub.1-x Er.sub.x)Al.sub.2 for a magnetic refrigerator using the Joule-Brayton thermodynamic cycle spanning a temperature range from about 60K to about 10K, which can be adjusted by changing the Dy to Er ratio of the refrigerant.

  12. Bierman {ital et al.}Reply:

    SciTech Connect

    Bierman, J.D.; Chan, P.; Liang, J.F.; Kelly, M.P.; Sonzogni, A.A.; Vandenbosch, R.

    1997-05-01

    reply to the Comment by C.H.Dasso et al., Phys. Rev. Lett. 78,XXX(1997). A Reply to the Comment by C.H. Dasso and J. Fern{acute a}ndez-Niello. {copyright} {ital 1997} {ital The American Physical Society}

  13. Hughes et al.: Science or Promotion?

    ERIC Educational Resources Information Center

    Loman, L. Anthony; Siegel, Gary L.

    2013-01-01

    The Hughes et al. paper is critiqued generally and in specific areas. The weak nature of the authors' empirical work is discussed along with their enigmatic writing and vague and incorrect use of references, and their simultaneous use of sweeping statements of opinion and narrow analytical focus. This review examines the authors' errors…

  14. Kinematics of Disease Progression in Bulbar ALS

    ERIC Educational Resources Information Center

    Yunusova, Yana; Green, Jordan R.; Lindstrom, Mary J.; Ball, Laura J.; Pattee, Gary L.; Zinman, Lorne

    2010-01-01

    The goal of this study was to investigate the deterioration of lip and jaw movements during speech longitudinally in three individuals diagnosed with bulbar amyotrophic lateral sclerosis (ALS). The study was motivated by the need to understand the relationship between physiologic changes in speech movements and clinical measures of speech…

  15. Al/Cl2 molten salt battery

    NASA Technical Reports Server (NTRS)

    Giner, J.

    1972-01-01

    Molten salt battery has been developed with theoretical energy density of 5.2 j/kg (650 W-h/lb). Battery, which operates at 150 C, can be used in primary mode or as rechargeable battery. Battery has aluminum anode and chlorine cathode. Electrolyte is mixture of AlCl3, NaCl, and some alkali metal halide such as KCl.

  16. Cryptanalysis on Cheng et al. protocol

    NASA Astrophysics Data System (ADS)

    Thakur, Tejeshwari

    2016-06-01

    Deployment of new node in any wireless sensor network is a sensitive task. This is the reason why, an Access Control Protocol is required in WSN. In this paper, we demonstrate that Access Control Protocol proposed by Cheng et al.[1] for Wireless Sensor Network is insecure. The reason is that this protocol fails to resist the active attack.

  17. Ternary Dy-Er-Al magnetic refrigerants

    DOEpatents

    Gschneidner, K.A. Jr.; Takeya, Hiroyuki

    1995-07-25

    A ternary magnetic refrigerant material comprising (Dy{sub 1{minus}x}Er{sub x})Al{sub 2} for a magnetic refrigerator using the Joule-Brayton thermodynamic cycle spanning a temperature range from about 60K to about 10K, which can be adjusted by changing the Dy to Er ratio of the refrigerant. 29 figs.

  18. Synopsis of "Reply to Levitas et al."

    ERIC Educational Resources Information Center

    O'Brien, John

    1994-01-01

    This synopsis of a reply by Wolf Wolfensberger to a critique by Levitas et al. (EC 609 743) notes extensive documentation supporting Wolfensberger's assertion that prescription psychoactive drugs are health destroying and life destroying. Issues of truth and of epistemology are identified as they apply to the treatment of these socially devalued…

  19. 76 FR 62481 - Incapital LLC, et al.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-07

    ... From the Federal Register Online via the Government Publishing Office SECURITIES AND EXCHANGE COMMISSION Incapital LLC, et al.; Notice of Application September 30, 2011. AGENCY: Securities and Exchange Commission (``Commission''). ACTION: Notice of application for an order under section 12(d)(1)(J) of...

  20. U-ALS: A Ubiquitous Learning Environment

    ERIC Educational Resources Information Center

    Piovesan, Sandra Dutra; Passerino, Liliana Maria; Medina, Roseclea Duarte

    2012-01-01

    The diffusion of the use of the learning virtual environments presents a great potential for the development of an application which meet the necessities in the education area. In view of the importance of a more dynamic application and that can adapt itself continuously to the students' necessities, the "U-ALS" (Ubiquitous Adapted Learning…

  1. SPI measurements of Galactic 26Al

    NASA Astrophysics Data System (ADS)

    Diehl, R.; Knödlseder, J.; Lichti, G. G.; Kretschmer, K.; Schanne, S.; Schönfelder, V.; Strong, A. W.; von Kienlin, A.; Weidenspointner, G.; Winkler, C.; Wunderer, C.

    2003-11-01

    The precision measurement of the 1809 keV gamma-ray line from Galactic 26Al is one of the goals of the SPI spectrometer on INTEGRAL with its Ge detector camera. We aim for determination of the detailed shape of this gamma-ray line, and its variation for different source regions along the plane of the Galaxy. Data from the first part of the core program observations of the first mission year have been inspected. A clear detection of the 26Al line at =~ 5-7 sigma significance demonstrates that SPI will deepen 26Al studies. The line intensity is consistent with expectations from previous experiments, and the line appears narrower than the 5.4 keV FWHM reported by GRIS, more consistent with RHESSI's recent value. Only preliminary statements can be made at this time, however, due to the multi-component background underlying the signal at =~ 40 times higher intensity than the signal from Galactic 26Al.

  2. Aluminum matrix texture in Al-Al3Ti functionally graded materials analyzed by electron back-scattering diffraction

    NASA Astrophysics Data System (ADS)

    Watanabe, Yoshimi; Sequeira, Paulo D.; Sato, Hisashi; Inamura, Tomonari; Hosoda, Hideki

    2016-01-01

    Al matrix functionally graded materials (FGMs) with oriented Al3Ti platelets were fabricated by a centrifugal solid-particle method. The applied centrifugal forces were 30, 60, and 120G (units of gravity). The orientation and volume fraction gradients of the Al3Ti platelets within the samples were measured. Since a good lattice correspondence was reported for the close-packed directions and the close-packed planes between Al and Al3Ti, the Al matrix in the Al-Al3Ti FGMs fabricated by the centrifugal solid-particle method should have some texture. Al matrix texture was, therefore, analyzed by electron back-scattering diffraction (EBSD). Analysis of the resulting pole figures indicates a preferred orientation along the (200) plane for the Al matrix crystals. Furthermore, increasing the applied centrifugal force enhances the orientation effect. A correlation appears to exist between platelet orientation and the preferred texture of the Al matrix.

  3. Spectroscopic analysis of the open 3d subshell transition metal aluminides: AlV, AlCr, and AlCo

    NASA Astrophysics Data System (ADS)

    Behm, Jane M.; Brugh, Dale J.; Morse, Michael D.

    1994-10-01

    Three open 3d subshell transition metal aluminides, AlV, AlCr, and AlCo, have been investigated by resonant two-photon ionization spectroscopy to elucidate the chemical bonding in these diatomic molecules. The open nature of the 3d subshell results in a vast number of excited electronic states in these species, allowing bond strengths to be measured by the observation of abrupt predissociation thresholds in a congested optical spectrum, giving D00(AlV)=1.489±0.010 eV, D00(AlCr)=2.272±0.009 eV, and D00(AlCo)=1.844±0.002 eV. At lower excitation energies the presence of discrete transitions has permitted determinations of the ground state symmetries and bond lengths of AlV and AlCo through rotationally resolved studies, giving r0` (AlV, Ω`=0)=2.620±0.004 Å and r0` (AlCo, Ω`=3)=2.3833±0.0005 Å. Ionization energies were also measured for all three species, yielding IE(AlV)=6.01±0.10 eV, IE(AlCr)=5.96±0.04 eV, and IE(AlCo)=6.99±0.17 eV. A discussion of these results is presented in the context of previous work on AlCu, AlNi, AlCa, and AlZn.

  4. Thermoelectric Powers of Cells With NaF-AlF3-Al2O3 Melts

    NASA Astrophysics Data System (ADS)

    Flem, Belinda E.; Xu, Qian; Kjelstrup, Signe; Sterten, Åsmund

    2001-07-01

    A thermodynamic description of the Peltier heat at the aluminum and the oxygen electrode in the system NaF-AlF3-Al2O3 is given. The thermoelectric power in melts with molar ratios n NaF/n AlF3 from 3.0 to 1.0, saturated with alumina are measured. Seebeck coefficients for molten fluoride electrolytes saturated with alumina, electrolytes that are relevant for aluminum electrowinning electrolysis cells, are reported. The results allow determinations of Peltier heats of aluminum, oxygen and carbon electrodes in NaF-AlF3 electrolytes saturated with alumina. For molar ratios of n NaF/n AlF3 between 2.6 and 1.2, there is a Peltier heating of the aluminum cathode. This heating is in the same order of magnitude as the electrolyte Joule heat, when the current density is 0.7 A cm-2. For molar ratio n NaF/n AlF3 equal to 1.0 the Peltier effect at the aluminum electrode approaches zero. From theoretical considerations we expect a drop also for molar ratio 3.0. For the anode we report a Peltier cooling that is larger than the heat produced by the anodic overvoltage, in melts with NaF/AlF3 molar ratio between 2.6 and 1.2 saturated with alumina.

  5. A novel Al matrix composite reinforced by nano-AlNp network

    PubMed Central

    Ma, X.; Zhao, Y. F.; Tian, W. J.; Qian, Z.; Chen, H. W.; Wu, Y. Y.; Liu, X. F.

    2016-01-01

    In pursuit of lightweighting of automobiles and low emission of transportation, the efforts to develop high-strength, heat-resistant and fatigue-resistant Al alloys and/or composites have been ongoing. Here we report a novel Al matrix composite with ultrahigh strength reinforced by a three dimensional network of nano-AlN particles for the first time. The in-situ synthesized AlN particles are connected by twinning bonding chains and built up a three dimensional network strengthening Al matrix enormously like the skeleton to human body. The composite containing 16.4wt.% AlN particles shows excellent properties: the ultimate tensile strengths can be up to 518MPa at room temperature and 190MPa at 350 °C. This peculiar performance results from the novel spatial distribution of nano-scale AlN particles. Our findings in this work would help to develop a potential candidate for high-performance heat resistance light-metal based materials. PMID:27721417

  6. Effect of speciation transformation on the coagulation behavior of Al(13) and Al(13) aggregates.

    PubMed

    Wu, Xiaohong; Ye, Changqing; Wang, Dongsheng; Ge, Xiaopeng; Tang, Hongxiao

    2009-01-01

    Flocculation of kaolin suspension with aluminium fractal polycations was investigated as a function of aluminium concentration and pH. Aluminium flocculants included Al(13) and Al(13) aggregates with OH/Al ratio of 2.6 and 2.8, respectively. The flocculation kinetics and floc size distribution were monitored by light scattering. The characterization of flocculants showed that the tridecatmer Al(13) and bridged [Al(13)](n) with out-sphere structure were the dominant species for all flocculants in a wide pH range. The coagulation results indicated that the pre and in situ-formed [Al(13)](n) play a key role in removing particles. With the increasing concentration of [Al(13)](n), coagulation mechanisms were transformed from charge-neutralization, electro-patch coagulation to bridge-aggregation. Moreover, sweep-flocculation was involved at higher dosage besides other three mechanisms when amorphous aluminium oxides formed. Hence, chemical interaction between particles and flocculants evolved from surface adsorption to surface precipitation for aluminium polycations by virtue of species transformation. PMID:19237777

  7. A novel Al matrix composite reinforced by nano-AlNp network

    NASA Astrophysics Data System (ADS)

    Ma, X.; Zhao, Y. F.; Tian, W. J.; Qian, Z.; Chen, H. W.; Wu, Y. Y.; Liu, X. F.

    2016-10-01

    In pursuit of lightweighting of automobiles and low emission of transportation, the efforts to develop high-strength, heat-resistant and fatigue-resistant Al alloys and/or composites have been ongoing. Here we report a novel Al matrix composite with ultrahigh strength reinforced by a three dimensional network of nano-AlN particles for the first time. The in-situ synthesized AlN particles are connected by twinning bonding chains and built up a three dimensional network strengthening Al matrix enormously like the skeleton to human body. The composite containing 16.4wt.% AlN particles shows excellent properties: the ultimate tensile strengths can be up to 518MPa at room temperature and 190MPa at 350 °C. This peculiar performance results from the novel spatial distribution of nano-scale AlN particles. Our findings in this work would help to develop a potential candidate for high-performance heat resistance light-metal based materials.

  8. Some TEM observations of Al2O3 scales formed on NiCrAl alloys

    NASA Technical Reports Server (NTRS)

    Smialek, J.; Gibala, R.

    1979-01-01

    The microstructural development of Al2O3 scales on NiCrAl alloys has been examined by transmission electron microscopy. Voids were observed within grains in scales formed on a pure NiCrAl alloy. Both voids and oxide grains grew measurably with oxidation time at 1100 C. The size and amount of porosity decreased towards the oxide-metal growth interface. The voids resulted from an excess number of oxygen vacancies near the oxidemetal interface. Short-circuit diffusion paths were discussed in reference to current growth stress models for oxide scales. Transient oxidation of pure, Y-doped, and Zr-doped NiCrAl was also examined. Oriented alpha-(Al, Cr)2O3 and Ni(Al, Cr)2O4 scales often coexisted in layered structures on all three alloys. Close-packed oxygen planes and directions in the corundum and spinel layers were parallel. The close relationship between oxide layers provided a gradual transition from initial transient scales to steady state Al2O3 growth.

  9. When Validity Testing Lacks Validity: Comment on Levine et al.

    ERIC Educational Resources Information Center

    Kim, Min-Sun; Raja, Narayan S.

    2003-01-01

    Addresses each of the three main areas of Levine et al.'s (see this issue, CS 764 297) validity testing: mean differences in self-construals between Asians and Westerners and within individuals; priming experiments; and factor analysis of self-construal scales. Suggests that Levine et al.'s conclusions on crucial aspects of validity are untenable.…

  10. An epidemiological study of cutaneous leishmaniasis in Al-jabal Al-gharbi, Libya.

    PubMed

    Abdellatif, Manal Z M; El-Mabrouk, Khamis; Ewis, Ashraf A

    2013-02-01

    Cutaneous leishmaniasis (CL) is an endemic parasitic infection in the Mediterranean region, including Libya and its Al-jabal Al-gharbi province. We aimed at studying the occupational relevance as well as other epidemiological aspects of CL. We investigated 140 CL cases who attended at Gharyan outpatient polyclinic during a period of 6 months in 2009. CL infection was clinically diagnosed and confirmed by demonstration of Leishmania parasites on smears from lesions. Our findings showed that males were more affected than females (P=0.04), and people above 10-years were more affected than younger ones (P=0.0001). A significant percent of CL cases belonged to Al-Kawasem subprovince (P=0.0001). Farm-related activities were the most frequent occupations among CL cases (P=0.04). In addition to farm workers, housewives and students are at risk groups since they are engaged at farm activities. Moreover, those who have occupations that require staying outdoors for a part of night, e.g., policemen, are also at risk. Compared to children, adult CL patients had multiple lesions (P=0.001) that were more prevalent in their upper and lower extremities than the face (P=0.0001). We conclude that CL is a major health problem in Al-jabal Al-gharbi province of Libya. The presence of rodents and sandflies makes it a suitable environment for Leishmania to spread in an endemic epidemiological pattern. Being engaged in farming activities or outdoor occupations increases the risk of infection. Various clinical patterns of CL suggest the presence of more than 1 species of Leishmania at Al-jabal Al-gharbi province. We propose that the 2 species responsible for CL in this area are L. major and L. tropica. Further investigations to identify the leishmanial species responsible for CL at Al-jabal Al-gharbi together with adoption of preventive and control programs are needed.

  11. An Epidemiological Study of Cutaneous Leishmaniasis in Al-Jabal Al-Gharbi, Libya

    PubMed Central

    Abdellatif, Manal Z. M.; El-Mabrouk, Khamis

    2013-01-01

    Cutaneous leishmaniasis (CL) is an endemic parasitic infection in the Mediterranean region, including Libya and its Al-jabal Al-gharbi province. We aimed at studying the occupational relevance as well as other epidemiological aspects of CL. We investigated 140 CL cases who attended at Gharyan outpatient polyclinic during a period of 6 months in 2009. CL infection was clinically diagnosed and confirmed by demonstration of Leishmania parasites on smears from lesions. Our findings showed that males were more affected than females (P=0.04), and people above 10-years were more affected than younger ones (P=0.0001). A significant percent of CL cases belonged to Al-Kawasem subprovince (P=0.0001). Farm-related activities were the most frequent occupations among CL cases (P=0.04). In addition to farm workers, housewives and students are at risk groups since they are engaged at farm activities. Moreover, those who have occupations that require staying outdoors for a part of night, e.g., policemen, are also at risk. Compared to children, adult CL patients had multiple lesions (P=0.001) that were more prevalent in their upper and lower extremities than the face (P=0.0001). We conclude that CL is a major health problem in Al-jabal Al-gharbi province of Libya. The presence of rodents and sandflies makes it a suitable environment for Leishmania to spread in an endemic epidemiological pattern. Being engaged in farming activities or outdoor occupations increases the risk of infection. Various clinical patterns of CL suggest the presence of more than 1 species of Leishmania at Al-jabal Al-gharbi province. We propose that the 2 species responsible for CL in this area are L. major and L. tropica. Further investigations to identify the leishmanial species responsible for CL at Al-jabal Al-gharbi together with adoption of preventive and control programs are needed. PMID:23467624

  12. Solidification processing of intermetallic Nb-Al alloys

    NASA Technical Reports Server (NTRS)

    Smith, Preston P.; Oliver, Ben F.; Noebe, Ronald D.

    1992-01-01

    Several Nb-Al alloys, including single-phase NbAl3 and the eutectic of Nb2Al and NbAl3, were prepared either by nonconsumable arc melting in Ar or by zone processing in He following initial induction melting and rod casting, and the effect of the solidification route on the microstructure and room-temperature mechanical properties of these alloys was investigated. Automated control procedures and melt conditions for directional solidification of NbAl3 and the Nb2Al/Nb3Al eutectic were developed; high purity and stoichiometry were obtained. The effects of ternary additions of Ti and Ni are described.

  13. Revisiting Deng et al.'s Multiparty Quantum Secret Sharing Protocol

    NASA Astrophysics Data System (ADS)

    Hwang, Tzonelih; Hwang, Cheng-Chieh; Yang, Chun-Wei; Li, Chuan-Ming

    2011-09-01

    The multiparty quantum secret sharing protocol [Deng et al. in Chin. Phys. Lett. 23: 1084-1087, 2006] is revisited in this study. It is found that the performance of Deng et al.'s protocol can be much improved by using the techniques of block-transmission and decoy single photons. As a result, the qubit efficiency is improved 2.4 times and only one classical communication, a public discussion, and two quantum communications between each agent and the secret holder are needed rather than n classical communications, n public discussions, and 3n/2 quantum communications required in the original scheme.

  14. Ferromagnetic ordering in NpAl2: Magnetic susceptibility and 27Al nuclear magnetic resonance

    NASA Astrophysics Data System (ADS)

    Martel, L.; Griveau, J.-C.; Eloirdi, R.; Selfslag, C.; Colineau, E.; Caciuffo, R.

    2015-08-01

    We report on the magnetic properties of the neptunium based ferromagnetic compound NpAl2. We used magnetization measurements and 27Al NMR spectroscopy to access magnetic features related to the paramagnetic and ordered states (TC=56 K). While very precise DC SQUID magnetization measurements confirm ferromagnetic ordering, they show a relatively small hysteresis loop at 5 K reduced with a coercive field HCo~3000 Oe. The variable offset cumulative spectra (VOCS) acquired in the paramagnetic state show a high sensitivity of the 27Al nuclei spectral parameters (Knight shifts and line broadening) to the ferromagnetic ordering, even at room temperature.

  15. Al-based metal matrix composites reinforced with nanocrystalline Al-Ti-Ni particles

    NASA Astrophysics Data System (ADS)

    Scudino, S.; Ali, F.; Surreddi, K. B.; Prashanth, K. G.; Sakaliyska, M.; Eckert, J.

    2010-07-01

    Al-based metal matrix composites containing different volume fractions of nanocrystalline Al70Ti20Ni10 reinforcing particles have been produced by powder metallurgy and the effect of the volume fraction of reinforcement on the mechanical properties of the composites has been studied. Room temperature compression tests reveal a considerable improvement of the mechanical properties as compared to pure Aluminum. The compressive strength increases from 155 MPa for pure Al to about 200 and 240 MPa for the samples with 20 and 40 vol.% of reinforcement, respectively, while retaining appreciable plastic deformation with a fracture strain ranging between 43 and 28 %.

  16. Gate length scaling effect on high-electron mobility transistors devices using AlGaN/GaN and AlInN/AlN/GaN heterostructures.

    PubMed

    Liao, S Y; Lu, C C; Chang, T; Huang, C F; Cheng, C H; Chang, L B

    2014-08-01

    Compared to AlGaN/GaN HEMT with 0.15 μm T-gate length, the AlInN/AlN/GaN one exhibits much higher current density and transconductance of 1558 mA/mm at Vd = 2 V and 330 mS/mm, respectively. The high extrinsic ft and fmax of 82 GHz and 70 GHz are extracted from AlInN/AlN/GaN HEMT. Besides, we find that the transconductance roll-off is significant in AlGaN/GaN, but largely improved in AlInN/AlN/GaN HEMT, suggesting that the high carrier density and lattice-matched epitaxial heterostructure is important to reach both large RF output power and high operation frequency, especially for an aggressively gate length scaling.

  17. Self-Separation of Sublimation-Grown AlN with AlSiN Buffer Layer

    NASA Astrophysics Data System (ADS)

    Nishino, Katsushi; Nakauchi, Jun; Hayashi, Kotaro; Tsukihara, Masashi

    2013-08-01

    AlN was grown by a sublimation method on 6H-SiC. We found the grown AlN layer is easily separated from the substrate when Si powder is added to the AlN source powder. The formation of AlSiN layer with the Si content of 15% at the AlN/6H-SiC interface was confirmed by energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD). This AlSiN layer causes the separation of AlN.

  18. Accurate interatomic potentials for Ni, Al and Ni/sub 3/Al

    SciTech Connect

    Voter, A.F.; Chen, Shao Ping

    1986-01-01

    To obtain meaningful results from atomistic simulations of materials, the interatomic potentials must be capable of reproducing the thermodynamic properties of the system of interest. Pairwise potentials have known deficiencies that make them unsuitable for quantitative investigations of defective regions such as crack tips and free surfaces. Daw and Baskes (Phys. Rev. B 29, 6443 (1984)) have shown that including a local ''volume'' term for each atom gives the necessary many-body character without the severe computational dependence of explicit n-body potential terms. Using a similar approach, we have fit an interatomic potential to the Ni/sub 3/Al alloy system. This potential can treat diatomic Ni/sub 2/, diatomic Al/sub 2/, fcc Ni, fcc Al and L1/sub 2/ Ni/sub 3/Al on an equal footing. Details of the fitting procedure are presented, along with the calculation of some properties not included in the fit.

  19. 'Abd al-Rahman al-Sufi's 3-Step Magnitude System

    NASA Astrophysics Data System (ADS)

    Hafez, Ihsan; Stephenson, F. Richard; Orchiston, Wayne

    'Abd al-Rahmān al-ūfī's Book of the Fixed Stars dates from around AD 964 and is one of the most important medieval Arabic treatises on astronomy. In this paper we begin with a very brief introduction to the Book of the Fixed Stars. This book contains an extensive star catalogue that lists star coordinates and magnitude estimates for all of the Ptolemaic stars. However, in his book al-hūfī utilized three distinct intermediate magnitude values whereas Ptolemy only mentioned two. We believe that al-hūfī used what we have termed a '3-step intermediate magnitude system,' which is more accurate than Ptolemy's 2-step intermediate system. In this paper we examine in detail the accuracy of this unique 3-step system in comparison with Ptolemy's and modern magnitude values.

  20. Interdiffusion in the Mg-Al system and Intrinsic Diffusion in (Al3Mg2) Phase

    SciTech Connect

    Brennan, Sarah; Bermudez, Katrina; Kulkarni, Nagraj S; Sohn, Yong Ho

    2011-01-01

    Increasing use and development of lightweight Mg-alloys have led to the desire for more fundamental research in and understanding of Mg-based systems. As a strengthening component, Al is one of the most important and common alloying elements for Mg-alloys. In this study, solid-to-solid diffusion couple techniques were employed to examine the interdiffusion between pure Mg and Al. Diffusion anneals were carried out at 300 , 350 , and 400 C for 720, 360, and 240 hours, respectively. Optical and scanning electron microscopies (SEM) were employed to observe the formation of the intermetallics -Al12Mg17 and -Al3Mg2, but not -phase. Concentration profiles were determined using X-ray energy dispersive spectroscopy (XEDS). The growth constants and activation energies were determined for each intermetallic phase.

  1. Fabrication of Fe-Al nanoparticles by selective oxidation of Fe-Al thin films

    NASA Astrophysics Data System (ADS)

    Jang, Pyungwoo; Shin, Seungchan; Jung, Chip-Sup; Kim, Kwang-Ho; Seomoon, Kyu

    2013-04-01

    The possibility of a new technique for fabricating nanoparticles from thin films using selective oxidation in an atmosphere mixture of water vapor and hydrogen was investigated. Fe-5wt.%Al films were RF-sputtered and annealed in the atmosphere mixture at 900°C for up to 200 min, in order to oxidize aluminum selectively. Thermodynamics simulation showed that temperatures exceeding 800°C are necessary to prevent iron from being oxidized, as confirmed by the depth profile of XPS. As the annealing time increased, the morphology of the 200-nm Fe-Al films changed from the continuous to the discontinuous type; thus, particulate Fe-Al films formed after 100 min. The particulate 10- to 100-nm Fe-Al films showed super-paramagnetic behavior after the oxidation. Thus, a new technique for fabricating nanoparticles was successfully introduced using selective oxidation.

  2. Synthesis and characterization of Al-Zn/Al2O3 nano-powder composites.

    PubMed

    Durai, T G; Das, Karabi; Das, Siddhartha

    2007-06-01

    Composites consisting of Al-Zn/Al2O3 have been synthesized using high energy mechanical milling. High energy ball milling increases the sintering rate of the composite powder due to increased diffusion rate. Owing to the finer microstructure, the hardness of the sintered composite produced by using the mechanically milled nanocomposite powder is significantly higher than that of the sintered composite produced by using the as-mixed powder. The mean crystallite size of the matrix has been determined to be 27 nm by Scherrer equation using X-ray diffraction data. The powders have been characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and differential thermal analysis (DTA). The effect of high-energy ball milling and subsequent annealing on a mixture of Al and ZnO has also been investigated. DTA result show that the reaction temperature of Al-ZnO decreases with the increase in the ball milling time.

  3. Rechargeable Al/Cl2 battery with molten AlCl4/-/ electrolyte.

    NASA Technical Reports Server (NTRS)

    Holleck, G. L.; Giner, J.; Burrows, B.

    1972-01-01

    A molten salt system based on Al- and Cl2 carbon electrodes, with an AlCl3 alkali chloride eutectic as electrolyte, offers promise as a rechargeable, high energy density battery which can operate at a relatively low temperature. Electrode kinetic studies showed that the electrode reactions at the Al anode were rapid and that the observed passivation phenomena were due to the formation at the electrode surface of a solid salt layer resulting from concentration changes on anodic or cathodic current flow. It was established that carbon electrodes were intrinsically active for chlorine reduction in AlCl3-alkali chloride melts. By means of a rotating vitreous carbon disk electrode, the kinetic parameters were determined.

  4. Differentiation of Al3+ and Al species in environmental samples by isotachophoresis.

    PubMed

    Schmid, S; Kördel, W; Klöppel, H; Klein, W

    1989-05-24

    An isotachophoretic method for the determination of free [Al(H2O)6]3+ ions in different aluminium salt solutions was developed. The electrolyte system consists of 0.01 M sodium acetate (leading system) and 0.01 M tris(hydroxymethyl)amino-methane (terminating system). Separation was effected with a precapillary tube (diameter 0.05 cm) followed by a main capillary tube of length 20 cm and of smaller cross-section. The detection limit for [Al(H2O)6]3+ ions was 0.05 mg/l. The method was applied to the determination of free Al3+ ions ([Al(H2O)6]3+) in soil leachates and aqueous soil extracts.

  5. Fabrication and properties of functionally graded NiAl/Al2O3 composites

    NASA Technical Reports Server (NTRS)

    Miller, D. P.; Lannutti, J. J.; Noebe, R. D.

    1993-01-01

    A modified sedimentation process was used in the production of a functionally gradient material (FGM), NiAl/Al2O3. A simple finite element model was used to guide our design and fabrication efforts by estimating residual stress states as a function of composite structure. This approach could lead to tailored designs that enhance or avoid specific residual stress states. Thermal cycling tests were factored into the model to predict time dependent or steady-state internal temperature and stress profiles. Four-point bend tests were conducted to establish the mechanical load-displacement behavior of a single interlayer FGM at room temperature, 800 and 1000 K. Room temperature bend strength of the FGM was 3-4 times that of the base NiAl. At elevated temperatures, composite fracture occurred in a gradual, noncatastrophic mode involving NiAl retardation of a succession of cracks originating in the alumina face.

  6. Characterization of Al30 in commercial poly-aluminum chlorohydrate by solid-state (27)Al NMR spectroscopy.

    PubMed

    Phillips, Brian L; Vaughn, John S; Smart, Scott; Pan, Long

    2016-08-15

    Investigation of commercially produced hydrolysis salts of aluminum by solid-state (27)Al NMR spectroscopy and size-exclusion chromatography (SEC) reveals well-defined and distinct Al environments that can be related to physicochemical properties. (27)Al MAS and MQ-MAS NMR spectroscopic data show that the local structure of the solids is dominated by moieties that closely resemble the Al30 polyoxocation (Al30O8(OH)56(H2O)26(18+)), accounting for 72-85% of the total Al. These Al30-like clusters elute as several size fractions by SEC. Comparison of the SEC and NMR results indicates that the Al30-like clusters includes intact isolated clusters, moieties of larger polymers or aggregates, and possibly fragments resembling δ-Al13 Keggin clusters. The coagulation efficacy of the solids appears to correlate best with the abundance of intact Al30-like clusters and of smaller species available to promote condensation reactions. PMID:27232539

  7. Correlation between Al grain size, grain boundary grooves and local variations in oxide barrier thickness of Al/AlOx/Al tunnel junctions by transmission electron microscopy.

    PubMed

    Nik, Samira; Krantz, Philip; Zeng, Lunjie; Greibe, Tine; Pettersson, Henrik; Gustafsson, Stefan; Delsing, Per; Olsson, Eva

    2016-01-01

    A thickness variation of only one Ångström makes a significant difference in the current through a tunnel junction due to the exponential thickness dependence of the current. It is thus important to achieve a uniform thickness along the barrier to enhance, for example, the sensitivity and speed of single electron transistors based on the tunnel junctions. Here, we have observed that grooves at Al grain boundaries are associated with a local increase of tunnel barrier thickness. The uniformity of the barrier thickness along the tunnel junction thus increases with increasing Al grain size. We have studied the effect of oxidation time, partial oxygen pressure and also temperature during film growth on the grain size. The implications are that the uniformity improves with higher temperature during film growth. PMID:27462515

  8. Forging of FeAl intermetallic compounds

    SciTech Connect

    Flores, O.; Juarez, J.; Campillo, B.; Martinez, L.; Schneibel, J.H.

    1994-09-01

    Much activity has been concentrated on the development of intermetallic compounds with the aim of improving tensile ductility, fracture toughness and high notch sensitivity in order to develop an attractive combination of properties for high and low temperature applications. This paper reports experience in processing and forging of FeAl intermetallic of B2 type. During the experiments two different temperatures were employed, and the specimens were forged after annealing in air, 10{sup {minus}2} torr vacuum and argon. From the results it was learned that annealing FeAl in argon atmosphere prior to forging resulted in better deformation behavior than for the other two environments. For the higher forging temperature used in the experiments (700C), the as-cast microstructure becomes partially recrystallized.

  9. Ni{sub 3}Al technology transfer

    SciTech Connect

    Sikka, V.K.; Viswanathan, S.; Santella, M.L.

    1997-04-01

    Ductile Ni{sub 3}Al and Ni{sub 3}Al-based alloys have been identified for a range of applications. These applications require the use of material in a variety of product forms such as sheet, plate, bar, wire, tubing, piping, and castings. Although significant progress has been made in the melting, casting, and near-net-shape forming of nickel aluminides, some issues still remain. These include the need for: (1) high-strength castable composition for many applications that have been identified; (2) castability (mold type, fluidity, hot-shortness, porosity, etc.); (3) weld reparability of castings; and (4) workability of cast or powder metallurgy product to sheet, bar, and wire. The four issues listed above can be {open_quotes}show stoppers{close_quotes} for the commercial application of nickel aluminides. This report describes the work completed to address some of these issues during FY 1996.

  10. Observable Proxies For 26 Al Enhancement

    SciTech Connect

    Fryer, Christopher L; Young, Patrick A; Ellinger, Carola I; Arnett, William D

    2008-01-01

    We consider the cospatial production of elements in supernova explosions to find observationally detectable proxies for enhancement of {sup 26}Al in supernova ejecta and stellar systems. Using four progenitors we explore a range of 1D explosions at different energies and an asymmetric 3D explosion. We find that the most reliable indicator of the presence of {sup 26}Al in unmixed ejecta is a very low S/Si ratio ({approx} 0.05). Production of N in O/S/Si-rich regions is also indicative. The biologically important element P is produced at its highest abundance in the same regions. Proxies should be detectable in supernova ejecta with high spatial resolution multi wavelength observations, but the small absolute abundance of material injected into a proto-planetary disk makes detection unlikely in existing or forming stellar/planetary systems.

  11. [Communication with ALS patients: neurosurgical approach].

    PubMed

    Yoshimine, Toshiki; Yanagisawa, Takufumi; Sawada, Jin-Ichi; Hazama, Takanori; Mochizuki, Hideki; Hirata, Masayuki

    2013-01-01

    By progression of the disease, motor neurons degenerate in patients with amyotrophic lateral sclerosis (ALS) eventually lose nearly all voluntary muscles in the body. They are awake and aware but cannot move or communicate (locked-in state). Since the function of the brain is preserved, one possible measure to support their communication is to interpret their motor intention by decoding (deciphering) brain signals and present it with external devices. This technology called "brain-machine interface (BMI)" is now close to clinical use in Japan and USA.In our system, we record electrocorticogram (ECoG) obtained with subudural electrodes during their motor imagery, decode it and determine the movement they intended. So far, one patient of ALS with severe paralysis, implanted with this electrodes, successfully operated the PC communication tool only by thinking.

  12. Ni{sub 3}Al technology transfer

    SciTech Connect

    Sikka, V.K.; Santella, M.L.; Alexander, D.J.

    1995-05-01

    Ductile Ni{sub 3}Al and Ni{sub 3}Al-based alloys have been identified for a range of applications. These applications require the use of material in a variety of product forms such as sheet, plate, bar, tubing, piping, and castings. Although significant progress has been made in the melting, casting, and near-net-shape forming of nickel aluminides, some issues still remain. These include the need for (1)high-strength castable composition for turbochargers, furnace furniture, and hot-die applications; (2) castability (fluidity, hot-shortness, porosity, etc.); (3) weld reparability of castings; and (4) hot fabricability of cast ingots. All of the issues listed above can be {open_quotes}show stoppers{close_quotes} for the commercial application of nickel aluminides. This report describes work completed to address some of these issues during the fourth quarter of FY 1994.

  13. Development of SiAlON materials

    NASA Technical Reports Server (NTRS)

    Layden, G. K.

    1979-01-01

    Cold pressing and sintering techniques were used to produce ceramic test specimens in which the major phase was either Si3N4 or a solid solution having the beta Si3N4 structure. Additional components were incorporated to promote liquid phase sintering. Glass and/or crystalline phase were consequently retained in boundaries between Si3N4 grains which largely determined the physical properties of the bodies. Systems investigated most extensively included R-Si-Al-O-N (R = rare earth element) Zr-Si-Al-O-N, Y-Si-Be-O-N, and R1-R2-Si-O-N. Room temperature and 1370 C modulus of ruptured, 1370 C creep, and oxidation behavior are discussed in terms of phase relationships in a parent quinery, and relavent oxide systems.

  14. Response to de la Iglesia et al.

    PubMed

    Yetish, Gandhi; Kaplan, Hillard; Gurven, Michael; Wood, Brian; Pontzer, Herman; Manger, Paul R; Wilson, Charles; McGregor, Ronald; Siegel, Jerome M

    2016-04-01

    We wish to respond to the commentary of de la Iglesia et al. [1]. Studies comparing sleep in different communities have different goals. One frequent goal has been to determine how sleep is affected by manipulating specific 'modern' conditions. Many studies have investigated the effect of artificial light and electronic entertainment. Such studies have clearly shown that light, particularly blue light, delays sleep onset [2]. Studying the effect of artificial light on sleep was not a goal of our study.

  15. Psychosocial adjustment to ALS: a longitudinal study

    PubMed Central

    Matuz, Tamara; Birbaumer, Niels; Hautzinger, Martin; Kübler, Andrea

    2015-01-01

    For the current study the Lazarian stress-coping theory and the appendant model of psychosocial adjustment to chronic illness and disabilities (Pakenham, 1999) has shaped the foundation for identifying determinants of adjustment to ALS. We aimed to investigate the evolution of psychosocial adjustment to ALS and to determine its long-term predictors. A longitudinal study design with four measurement time points was therefore, used to assess patients' quality of life, depression, and stress-coping model related aspects, such as illness characteristics, social support, cognitive appraisals, and coping strategies during a period of 2 years. Regression analyses revealed that 55% of the variance of severity of depressive symptoms and 47% of the variance in quality of life at T2 was accounted for by all the T1 predictor variables taken together. On the level of individual contributions, protective buffering, and appraisal of own coping potential accounted for a significant percentage in the variance in severity of depressive symptoms, whereas problem management coping strategies explained variance in quality of life scores. Illness characteristics at T2 did not explain any variance of both adjustment outcomes. Overall, the pattern of the longitudinal results indicated stable depressive symptoms and quality of life indices reflecting a successful adjustment to the disease across four measurement time points during a period of about two years. Empirical evidence is provided for the predictive value of social support, cognitive appraisals, and coping strategies, but not illness parameters such as severity and duration for adaptation to ALS. The current study contributes to a better conceptualization of adjustment, allowing us to provide evidence-based support beyond medical and physical intervention for people with ALS. PMID:26441696

  16. A comparative wear study on Al-Li and Al-Li/SiC composite

    SciTech Connect

    Okumus, S. Cem Karslioglu, Ramazan Akbulut, Hatem

    2013-12-16

    Aluminum-lithium based unreinforced (Al-8090) alloy and Al-8090/SiCp/17 vol.% metal matrix composite produced by extrusion after spray co-deposition. A dry ball-on disk wear test was carried out for both alloy and composite. The tests were performed against an Al{sub 2}O{sub 3} ball, 10 mm in diameter, at room temperature and in laboratory air conditions with a relative humidity of 40-60%. Sliding speed was chosen as 1.0 ms{sup −1} and normal loads of 1.0, 3.0 and 5.0 N were employed at a constant sliding distance of 1000 m. The wear damage on the specimens was evaluated via measurement of wear depth and diameter. Microstructural and wear characterization was carried out via scanning electron microscopy (SEM). The results showed that wear loss of the Al-8090/SiC composite was less than that of the Al-8090 matrix alloy. Plastic deformation observed on the wear surface of the composite and the matrix alloy, and the higher the applied load the greater the plastic deformation. Scanning electron microscopy examinations of wear tracks also reveal that delamination fracture was the dominant wear mechanism during the wear progression. Friction coefficient was maximum at the low applied load in the case of the Al-8090/SiC composite while a gradual increase was observed with applied load for the matrix alloy.

  17. A comparative wear study on Al-Li and Al-Li/SiC composite

    NASA Astrophysics Data System (ADS)

    Okumus, S. Cem; Karslioglu, Ramazan; Akbulut, Hatem

    2013-12-01

    Aluminum-lithium based unreinforced (Al-8090) alloy and Al-8090/SiCp/17 vol.% metal matrix composite produced by extrusion after spray co-deposition. A dry ball-on disk wear test was carried out for both alloy and composite. The tests were performed against an Al2O3 ball, 10 mm in diameter, at room temperature and in laboratory air conditions with a relative humidity of 40-60%. Sliding speed was chosen as 1.0 ms-1 and normal loads of 1.0, 3.0 and 5.0 N were employed at a constant sliding distance of 1000 m. The wear damage on the specimens was evaluated via measurement of wear depth and diameter. Microstructural and wear characterization was carried out via scanning electron microscopy (SEM). The results showed that wear loss of the Al-8090/SiC composite was less than that of the Al-8090 matrix alloy. Plastic deformation observed on the wear surface of the composite and the matrix alloy, and the higher the applied load the greater the plastic deformation. Scanning electron microscopy examinations of wear tracks also reveal that delamination fracture was the dominant wear mechanism during the wear progression. Friction coefficient was maximum at the low applied load in the case of the Al-8090/SiC composite while a gradual increase was observed with applied load for the matrix alloy.

  18. Room Temperature Radiolytic Synthesized Cu@CuAlO2-Al2O3 Nanoparticles

    PubMed Central

    Abedini, Alam; Saion, Elias; Larki, Farhad; Zakaria, Azmi; Noroozi, Monir; Soltani, Nayereh

    2012-01-01

    Colloidal Cu@CuAlO2-Al2O3 bimetallic nanoparticles were prepared by a gamma irradiation method in an aqueous system in the presence of polyvinyl pyrrolidone (PVP) and isopropanol respectively as a colloidal stabilizer and scavenger of hydrogen and hydroxyl radicals. The gamma irradiation was carried out in a 60Co gamma source chamber with different doses up to 120 kGy. The formation of Cu@CuAlO2-Al2O3 nanoparticles was observed initially by the change in color of the colloidal samples from colorless to brown. Fourier transform infrared spectroscopy (FTIR) confirmed the presence of bonds between polymer chains and the metal surface at all radiation doses. Results of transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDX), and X-ray diffraction (XRD) showed that Cu@CuAlO2-Al2O3 nanoparticles are in a core-shell structure. By controlling the absorbed dose and precursor concentration, nanoclusters with different particle sizes were obtained. The average particle diameter increased with increased precursor concentration and decreased with increased dose. This is due to the competition between nucleation, growth, and aggregation processes in the formation of nanoclusters during irradiation. PMID:23109893

  19. Room temperature radiolytic synthesized Cu@CuAlO(2)-Al(2)O(3) nanoparticles.

    PubMed

    Abedini, Alam; Saion, Elias; Larki, Farhad; Zakaria, Azmi; Noroozi, Monir; Soltani, Nayereh

    2012-01-01

    Colloidal Cu@CuAlO(2)-Al(2)O(3) bimetallic nanoparticles were prepared by a gamma irradiation method in an aqueous system in the presence of polyvinyl pyrrolidone (PVP) and isopropanol respectively as a colloidal stabilizer and scavenger of hydrogen and hydroxyl radicals. The gamma irradiation was carried out in a (60)Co gamma source chamber with different doses up to 120 kGy. The formation of Cu@CuAlO(2)-Al(2)O(3) nanoparticles was observed initially by the change in color of the colloidal samples from colorless to brown. Fourier transform infrared spectroscopy (FTIR) confirmed the presence of bonds between polymer chains and the metal surface at all radiation doses. Results of transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDX), and X-ray diffraction (XRD) showed that Cu@CuAlO(2)-Al(2)O(3) nanoparticles are in a core-shell structure. By controlling the absorbed dose and precursor concentration, nanoclusters with different particle sizes were obtained. The average particle diameter increased with increased precursor concentration and decreased with increased dose. This is due to the competition between nucleation, growth, and aggregation processes in the formation of nanoclusters during irradiation. PMID:23109893

  20. FeAl and NbAl3 Intermetallic-HVOF Coatings: Structure and Properties

    NASA Astrophysics Data System (ADS)

    Guilemany, J. M.; Cinca, N.; Dosta, S.; Cano, I. G.

    2009-12-01

    Transition metal aluminides in their coating form are currently being explored in terms of resistance to oxidation and mechanical behavior. This interest in transition metal aluminides is mainly due to the fact that their high Al content makes them attractive for high-temperature applications. This is also a reason to study their resistance to wear; they may be suitable for use in applications that produce a lot of wear in aggressive environments, thus replacing established coating materials. In this study, the microstructure, microhardness, and wear and oxidation performance of FeAl and NbAl3 coatings produced by high-velocity oxy-fuel spraying are evaluated with two main aims: (i) to compare these two coating systems—a commonly studied aluminide (FeAl) and, NbAl3, an aluminide whose deposition by thermal spraying has not been attempted to date—and (ii) to analyze the relationship between their microstructure, composition and properties, and so clarify their wear and oxidation mechanisms. In the present study, the higher hardness of niobium aluminide coatings did not correlate with a higher wear resistance and, finally, although pesting phenomena (disintegration in oxidizing environments) were already known of in bulk niobium aluminides, here their behavior in the coating form is examined. It was shown that such accelerated oxidation was inevitable with respect to the better resistance of FeAl, but further improvements are foreseen by addition of alloying elements in that alloy.

  1. Preparation and characterization of Ppy/Al 2O 3/Al used as a solid-state capacitor

    NASA Astrophysics Data System (ADS)

    Tsai, Ming-Liao; Chen, Pei-Jiun; Do, Jing-Shan

    The characteristics of a solid-state capacitor based on Ppy (polypyrrole)/Al 2O 3/Al prepared by the constant-current method are investigated. The surface composition of aluminum (Al) foil analyzed to by electron spectroscopy for chemical analysis (ESCA) is found to be AlO 2- when the native oxide on the Al foil is etched by 0.1 M NaOH. Three stages are defined from the relationship between the potential and the electrolysis time in simultaneously preparing the dielectric layer (Al 2O 3) and the conducting polymer (Ppy) on Al foil etched with 0.1 M NaOH. The experimental results indicate that only stage one, i.e. the formation of Al 2O 3, occurs in the preparation of Ppy/Al 2O 3/Al at a current density greater than 0.9 mA cm -2. A higher concentration of pyrrole enhances the nucleation of Ppy within the pores of Al 2O 3 such that the period of the first stage decrease and the second stage of the propagation of Ppy is increased. The leakage current of Ppy/Al 2O 3/Al rises from 0.009 to 0.405 μA cm -2 with increase in the concentration of pyrrole in preparing Ppy/Al 2O 3/Al from 0.05 to 0.15 M. Raising the cut-off potential for preparing Ppy/Al 2O 3/Al from 20 to 60 V increases the thickness of Al 2O 3 and lowers the capacity of Ppy/Al 2O 3/Al from 478.5 to 174.2 nF cm -2.

  2. Energetic ion bombarded Fe/Al multilayers

    SciTech Connect

    Al-Busaidy, M.S.; Crapper, M.D.

    2006-05-15

    The utility of ion-assisted deposition is investigated to explore the possibility of counteracting the deficiency of back-reflected current of Ar neutrals in the case of lighter elements such as Al. A range of energetically ion bombarded Fe/Al multilayers sputtered with applied surface bias of 0, -200, or -400 V were deposited onto Si(111) substrates in an argon atmosphere of 4 mTorr using a computer controlled dc magnetron sputtering system. Grazing incidence reflectivity and rocking curve scans by synchrotron x rays of wavelength of 1.38 A were used to investigate the structures of the interfaces produced. Substantial evidence has been gathered to suggest the gradual suppression of interfacial mixing and reduction in interfacial roughness with increases of applied bias. The densification of the Al microstructure was noticeable and may be a consequence of resputtering attributable to the induced ion bombardment. The average interfacial roughnesses were calculated for the 0, -200, and -400 V samples to be 7{+-}0.5, 6{+-}0.5, and 5{+-}0.5 A respectfully demonstrating a 30% improvement in interface quality. Data from rocking curve scans point to improved long-range correlated roughness in energetically deposited samples. The computational code based on the recursive algorithm developed by Parratt [Phys. Rev. 95, 359 (1954)] was successful in the simulation of the specular reflectivity curves.

  3. Diet and dietetics in al-Andalus.

    PubMed

    Salas-Salvadó, Jordi; Huetos-Solano, Maria D; García-Lorda, Pilar; Bulló, Mònica

    2006-08-01

    Al-Andalus society (711-1492) based its idea of health on the wisdom of Classical Greece, the Hippocratic-Galenic theories, as well as the Persian and Hindu cultures. The twelfth century in al-Andalus is considered to be the most prolific period for works of a scientific and technical nature. At the time, the main treatises on dietetics were written and this science reached its widest expression with such leading figures as Ibn Wāfīd, Avenzoar, Averroes and Maimonides, whose works revealed the first scientific knowledge on the nutritional processes of the human body. Diet was regarded as being essential for health and the prevention of disease. Dietary guidelines were written for different age groups, different body types and different seasons of the year. The amount of food to be ingested, the number of meals recommended and the order in which the food should be consumed were all issues that were discussed. A variety of foods were thought to have medicinal properties, some of which are known today. The diet in al-Andalus was varied and very probably made a substantial contribution to the origin of the present-day Mediterranean diet, rich in olive oil, wholemeal cereals, fruit and vegetables, fish, lamb, poultry, nuts and spices. We also find that many of the terms in current use in diet and agriculture are a living testimony to the Arabic influence, as are many of the dishes of our varied Mediterranean gastronomy.

  4. Lower motor neuron dysfunction in ALS.

    PubMed

    de Carvalho, Mamede; Swash, Michael

    2016-07-01

    In the motor system there is a complex interplay between cortical structures and spinal cord lower motor neurons (LMN). In this system both inhibitory and excitatory neurons have relevant roles. LMN loss is a marker of motor neuron disease/amyotrophic lateral sclerosis (MND/ALS). Conventional needle electromyography (EMG) does not allow LMN loss to be quantified. Measurement of compound muscle action potential (CMAP) amplitude or area, and the neurophysiological index, provide a surrogate estimate of the number of functional motor units. Increased motor neuronal excitability is a neurophysiological marker of ALS in the context of a suspected clinical and electrophysiological diagnosis. In the LMN system, fasciculation potentials (FPs) are the earliest changes observed in affected muscles, a feature of LMN hyperexcitability. Reinnervation is best investigated by needle EMG although other methods can be explored. Moreover needle EMG give information about the temporal profile of the reinnervation process, important ancillary data. Quantitative motor unit potential analysis is a valuable method of evaluating reinnervation. The importance of FPs has been recognized in the Awaji criteria for the electrodiagnosis of ALS, criteria that are a sensitive adjunct to the revised El Escorial criteria. Finally, functionality of LMN's, and perhaps excitability studies in motor nerves, aids understanding of the disease process, allowing measurement of potential treatment effects in clinical trials. Other investigational techniques, such as electrical impedance myography, muscle and nerve ultrasound, and spinal cord imaging methods may prove useful in future. PMID:27117334

  5. Microplastic flow in SIC/AL composites

    SciTech Connect

    Shi, N.; Arsenault, R.J.

    1995-12-31

    Experimentally it has been determined that if a composite containing a reinforcement which has a different (in general lower) thermal coefficient of expansion as compared to the matrix, then upon cooling from the processing or annealing temperature, plastic relaxation of the misfit strain will occur. Also, experimentally it has been shown that as the size of the reinforcement is increased, i.e., from small spheres to large spheres, there is a decrease in the summation of the effective plastic strain in the matrix. In other words there is a decrease in the average dislocation density in the matrix. However, if the shape of the reinforcement is changed from spherical to short fiber to continuous filament, then the dislocation density increases. This experimental data is obtained at a constant volume fraction. A very simple model of plastic relaxation based on prismatic punching of dislocations from the interface can account for the decrease in the dislocation density with an increase reinforcement size, and the increase in dislocation density when changing the shape from a sphere to a continuous filament. A FEM analysis of the shape factor is also capable of predicting the correct trend. However, at present the continuum mechanics methods that have been investigated can not predict the size dependence. A simple model to explain the size effect in Al{sub 2}O{sub 3}/NiAl composites based on the deformation characteristics of NiAl will be discussed.

  6. Diet and dietetics in al-Andalus.

    PubMed

    Salas-Salvadó, Jordi; Huetos-Solano, Maria D; García-Lorda, Pilar; Bulló, Mònica

    2006-08-01

    Al-Andalus society (711-1492) based its idea of health on the wisdom of Classical Greece, the Hippocratic-Galenic theories, as well as the Persian and Hindu cultures. The twelfth century in al-Andalus is considered to be the most prolific period for works of a scientific and technical nature. At the time, the main treatises on dietetics were written and this science reached its widest expression with such leading figures as Ibn Wāfīd, Avenzoar, Averroes and Maimonides, whose works revealed the first scientific knowledge on the nutritional processes of the human body. Diet was regarded as being essential for health and the prevention of disease. Dietary guidelines were written for different age groups, different body types and different seasons of the year. The amount of food to be ingested, the number of meals recommended and the order in which the food should be consumed were all issues that were discussed. A variety of foods were thought to have medicinal properties, some of which are known today. The diet in al-Andalus was varied and very probably made a substantial contribution to the origin of the present-day Mediterranean diet, rich in olive oil, wholemeal cereals, fruit and vegetables, fish, lamb, poultry, nuts and spices. We also find that many of the terms in current use in diet and agriculture are a living testimony to the Arabic influence, as are many of the dishes of our varied Mediterranean gastronomy. PMID:16923240

  7. The atomic details of the interfacial interaction between the bottom electrode of Al/AlOx/Al Josephson junctions and HF-treated Si substrates

    NASA Astrophysics Data System (ADS)

    Zeng, L. J.; Krantz, P.; Nik, S.; Delsing, P.; Olsson, E.

    2015-04-01

    The interface between the Al bottom contact layer and Si substrates in Al based Josephson junctions is believed to have a significant effect on the noise observed in Al based superconducting devices. We have studied the atomic structure of it by transmission electron microscopy. An amorphous layer with a thickness of ˜5 nm was found between the bottom Al electrode and HF-treated Si substrate. It results from intermixing between Al, Si, and O. We also studied the chemical bonding states among the different species using energy loss near edge structure. The observations are of importance for the understanding of the origin of decoherence mechanisms in qubits based on these junctions.

  8. Effect of the composition of Al-Li alloys on the quantitative relation between the δ'(Al3Li), S1(Al2MgLi), and T1(Al2CuLi) phases

    NASA Astrophysics Data System (ADS)

    Betsofen, S. Ya.; Antipov, V. V.; Grushin, I. A.; Knyazev, M. I.; Khokhlatova, L. B.; Alekseev, A. A.

    2015-01-01

    Al-Li alloys are considered. A quantitative approach to the determination of the ratio of the fractions of the binary and ternary intermetallic phases in Al-Mg(Cu)-Li alloys is developed on the basis of chemical and phase composition balance equations and the experimentally measured lattice parameter of the α solid solution. The ratio of the fractions of the δ'(Al3Li) and S1(T1) phases in Al-Mg(Cu)-Li alloys is shown to be determined by the ratio of the mole fractions of Li and Mg(Cu). Equations are proposed for calculating the weight fractions of the S1(Al2MgLi), T1(Al2CuLi) and δ'(Al3Li) phases in domestic and foreign Al-Mg-Li alloys 1420, 1424, 5090 and Al-Cu-Li alloys 1440, 1460, 1461, 1441, 1469, 2090, 2095, 8090, and Weldalite 049.

  9. The oxidation of Ni-rich Ni-Al intermetallics

    NASA Technical Reports Server (NTRS)

    Doychak, Joseph; Smialek, James L.; Barrett, Charles A.

    1988-01-01

    The oxidation of Ni-Al intermetallic alloys in the beta-NiAl phase field and in the two phase beta-NiAl/gamma'-Ni3Al phase field has been studied between 1000 and 1400 C. The stoichiometric beta-NiAl alloy doped with Zr was superior to other alloy compositions under cyclic and isothermal oxidation. The isothermal growth rates did not increase monotonically as the alloy Al content was decreased. The characteristically ridged alpha-Al2O3 scale morphology, consisting of cells of thin, textured oxide with thick growth ridges at cell boundaries, forms on oxidized beta-NiAl alloys. The correlation of scale features with isothermal growth rates indicates a predominant grain boundary diffusion growth mechanism. The 1200 C cyclic oxidation resistance decreases near the lower end of the beta-NiAl phase field.

  10. Creep and Toughness of Cryomilled NiAl Containing Cr

    NASA Technical Reports Server (NTRS)

    Whittenberger, J. Daniel; Aikin, Beverly; Salem, Jon

    2000-01-01

    NiAl-AlN + Cr composites were produced by blending cryomilled NiAl powder with approx. 10 vol % Cr flakes. In comparison to the as-consolidated matrices, hot isostatically pressed Cr-modified materials did not demonstrate any significant improvement in toughness. Hot extruded NiAl-AlN+10.5Cr, however, possessed a toughness twice that determine for the base NiAl-AlN alloy. Measurement of the 1200 to 1400 K plastic flow properties revealed that the strength of the composites was completely controlled by the properties of the NiAl-AlN matrices. This behavior could be successfully modeled by the Rule-of-Mixtures, where load is shed from the weak Cr to the strong matrix.

  11. High-efficiency of AlInGaN/Al(In)GaN-delta AlGaN quantum wells for deep-ultraviolet emission

    NASA Astrophysics Data System (ADS)

    Saidi, Hosni; Ridene, Said

    2016-10-01

    Band structure and optical gain properties of AlInGaN/AlInGaN-delta-AlGaN quantum wells for deep-ultraviolet light emitting and lasers diodes with wavelength λ ∼229 nm and TE-polarized optical gain peak intensity ∼1.7 times larger than the conventional AlInN-delta-GaN was proposed and investigated in this work. The active region is made up of 20 Å staggered Al0.89In0.03Ga0.08N/Al0.8In 0.01Ga0.19N layers with a 3 Å Al0.46Ga0.54N delta layer. The use of the quaternary AlInGaN well layer permits the independent control of the band gap and the lattice parameter, so that the internal electric field induced by polarizations can be reduced and interband transition energy increases. Therefore, we can predict that the optical performance of the AlInGaN-delta-AlGaN is more convenient for an emission in the deep-ultraviolet than that of the conventional AlInN-delta-GaN-based quantum wells.

  12. Alignment of the TiAl/Ti{sub 3}Al lamellar microstructure in TiAl alloys by growth from a seed material

    SciTech Connect

    Johnson, D.R.; Masuda, Y.; Inui, H.; Yamaguchi, M.

    1997-06-01

    By using an appropriately oriented seed from the TiAl-Si system, the TiAl/Ti{sub 3}Al lamellar microstructure was aligned parallel to the growth direction in a number of directionally solidified TiAl-based alloys. The seed composition was kept constant at Ti-43Al-3Si (at.%) and the composition of the master ingots was varied for alloys in the TiAl-Si, TiAl-Nb-Si, and Ti-Al systems. The lamellar microstructure could be aligned for alloys containing up to approximately 47 at.% (Al + Si) in each of these systems. For the composition of seed material, Ti-43Al-3Si, where alpha is the primary solidification phase, the original orientation of the lamellar microstructure was maintained after heating to and cooling from the single-phase alpha region making seeding of the alpha phase possible. When this silicon containing seed was used, the nucleation of the primary beta phase in master alloys of Ti-(47 {minus} x)Al-xSi(x = 0 to 1 at.%) could be suppressed resulting in the nucleation and growth of only the alpha phase with an orientation determined by the seed crystal. After steady state conditions were reached, single PST crystals with an aligned lamellar microstructure could be grown at growth rates as high as 40 mm/h.

  13. Short-period superlattices of AlN/Al{sub 0.08}Ga{sub 0.92}N grown on AlN substrates

    SciTech Connect

    Nikishin, S.A.; Borisov, B.A.; Chandolu, A.; Kuryatkov, V.V.; Temkin, H.; Holtz, M.; Mokhov, E.N.; Makarov, Yu.; Helava, H.

    2004-11-08

    High-quality short-period superlattices of AlN/Al{sub 0.08}Ga{sub 0.92}N have been grown by gas-source molecular-beam epitaxy with ammonia on Al face of AlN (0001) substrates. A significant reduction was achieved in the dislocation density, down to 3x10{sup 8} cm{sup -2}. Complete removal of residual Al{sub 2}O{sub 3} surface oxide is needed in order to obtain low dislocation density in homoepitaxy on AlN. We show that the presence of Al{sub 2}O{sub 3} islands with the surface coverage as low as 0.2% results in increased dislocation density.

  14. Chemical ordering and large tunnel magnetoresistance in Co2FeAl/MgAl2O4/Co2FeAl(001) junctions

    NASA Astrophysics Data System (ADS)

    Scheike, Thomas; Sukegawa, Hiroaki; Inomata, Koichiro; Ohkubo, Tadakatsu; Hono, Kazuhiro; Mitani, Seiji

    2016-05-01

    Epitaxial magnetic tunnel junctions (MTJs) with a Co2FeAl/CoFe (0.5 nm)/MgAl2O4/Co2FeAl(001) structure were fabricated by magnetron sputtering. High-temperature in situ annealing led to a high degree of B2-order in the Co2FeAl layers and cation order of the MgAl2O4 barrier. Large tunnel magnetoresistance (TMR) of up to 342% was obtained at room temperature (616% at 4 K), in contrast to the TMR ratio ( ≲ 160%) suppressed by the band-folding effect in Fe/cation-ordered MgAl2O4/Fe MTJs. The present study reveals that the high degree of B2-order and the resulting high spin polarization in the Co2FeAl electrodes enable us to bypass the band-folding problem in spinel barriers.

  15. A novel TiAl3/Al2O3 composite coating on γ-TiAl alloy and evaluating the oxidation performance

    NASA Astrophysics Data System (ADS)

    Wang, Jiqiang; Kong, Lingyan; Li, Tiefan; Xiong, Tianying

    2016-01-01

    A novel TiAl3/Al2O3 composite coating was prepared on γ-TiAl alloy. The process included two steps: (1) TiAl3/Al2O3 composite powders were prepared by high energy ball milling of pure Al and nano-TiO2 powders, followed by a heat-treatment; (2) the as-prepared composite powders were deposited on γ-TiAl substrate by cold spray. The cyclic oxidation was conducted at 900 °C to test the performance of the composite coating. The results showed that the composite coating had good crack resistance and effectively decreased the oxidation rate of the substrate.

  16. Effect of nitrogen incorporation into Al-based gate insulators in AlON/AlGaN/GaN metal-oxide-semiconductor structures

    NASA Astrophysics Data System (ADS)

    Asahara, Ryohei; Nozaki, Mikito; Yamada, Takahiro; Ito, Joyo; Nakazawa, Satoshi; Ishida, Masahiro; Ueda, Tetsuzo; Yoshigoe, Akitaka; Hosoi, Takuji; Shimura, Takayoshi; Watanabe, Heiji

    2016-10-01

    The superior physical and electrical properties of aluminum oxynitride (AlON) gate dielectrics on AlGaN/GaN substrates in terms of thermal stability, reliability, and interface quality were demonstrated by direct AlON deposition and subsequent annealing. Nitrogen incorporation into alumina was proven to be beneficial both for suppressing intermixing at the insulator/AlGaN interface and reducing the number of electrical defects in Al2O3 films. Consequently, we achieved high-quality AlON/AlGaN/GaN metal-oxide-semiconductor capacitors with improved stability against charge injection and a reduced interface state density as low as 1.2 × 1011 cm-2 eV-1. The impact of nitrogen incorporation into the insulator will be discussed on the basis of experimental findings.

  17. Al-Ca and Al-Fe metal-metal composite strength, conductivity, and microstructure relationships

    SciTech Connect

    Kim, Hyong June

    2011-01-01

    Deformation processed metal-metal composites (DMMC’s) are composites formed by mechanical working (i.e., rolling, swaging, or wire drawing) of two-phase, ductile metal mixtures. Since both the matrix and reinforcing phase are ductile metals, the composites can be heavily deformed to reduce the thickness and spacing of the two phases. Recent studies have shown that heavily drawn DMMCs can achieve anomalously high strength and outstanding combinations of strength and conductivity. In this study, Al-Fe wire composite with 0.07, 0.1, and 0.2 volume fractions of Fe filaments and Al-Ca wire composite with 0.03, 0.06, and 0.09 volume fractions of Ca filaments were produced in situ, and their mechanical properties were measured as a function of deformation true strain. The Al-Fe composites displayed limited deformation of the Fe phase even at high true strains, resulting in little strengthening effect in those composites. Al-9vol%Ca wire was deformed to a deformation true strain of 13.76. The resulting Ca second-phase filaments were deformed to thicknesses on the order of one micrometer. The ultimate tensile strength increased exponentially with increasing deformation true strain, reaching a value of 197 MPa at a true strain of 13.76. This value is 2.5 times higher than the value predicted by the rule of mixtures. A quantitative relationship between UTS and deformation true strain was determined. X-ray diffraction data on transformation of Al + Ca microstructures to Al + various Al-Ca intermetallic compounds were obtained at the Advanced Photon Source at Argonne National Laboratory. Electrical conductivity was measured over a range of true strains and post-deformation heat treatment schedules.

  18. Influence of Reaction with XeF2 on Surface Adhesion of Al and Al2O3 Surfaces

    SciTech Connect

    Zhang, Tianfu; Park, Jeong Y.; Huang, Wenyu; Somorjai, Gabor A.

    2008-07-28

    The change of surface adhesion after fluorination of Al and Al{sub 2}O{sub 3} surfaces using XeF{sub 2} was investigated with atomic force microscopy. The chemical interaction between XeF{sub 2} and Al and Al{sub 2}O{sub 3} surfaces was studied by in situ x-ray photoelectron spectroscopy. Fresh Al and Al{sub 2}O{sub 3} surfaces were obtained by etching top silicon layers of Si/Al and Si/Al{sub 2}O{sub 3} with XeF{sub 2}. The surface adhesion and chemical composition were measured as a function of time after the exposure to air or annealing (at 200 C under vauum). The correlation between the adhesion force increase and presence of AlF{sub 3} on the surface was revealed.

  19. Influence of reaction with XeF2 on surface adhesion of Al and Al2O3 surfaces

    NASA Astrophysics Data System (ADS)

    Zhang, Tianfu; Park, Jeong Y.; Huang, Wenyu; Somorjai, Gabor A.

    2008-10-01

    The change in surface adhesion after fluorination of Al and Al2O3 surfaces using XeF2 was investigated with atomic force microscopy. The chemical interaction between XeF2 and Al and Al2O3 surfaces was studied by in situ x-ray photoelectron spectroscopy. Fresh Al and Al2O3 surfaces were obtained by etching top silicon layers of Si /Al and Si /Al2O3 with XeF2. The surface adhesion and chemical composition were measured after the exposure to air or annealing (at 200°C under vacuum). The correlation between the adhesion force increase and presence of AlF3 on the surface was revealed.

  20. Hot Corrosion Performance of AlO-CrO/NiCoCrAlYTa and AlO/NiCoCrAlYTa Coatings Deposited by Atmospheric Plasma Spraying

    NASA Astrophysics Data System (ADS)

    Tao, Chong; Wang, Lei; Cheng, Nailiang; Hu, Hengfa; Liu, Yang; Song, Xiu

    2016-04-01

    AlO-CrO/NiCoCrAlYTa and AlO/NiCoCrAlYTa coatings were deposited on 316L stainless steel substrate using atmospheric plasma spraying, respectively, in order to improve the oxidation and corrosion resistance. The hot corrosion performance of the coatings at 700 and 900 °C were studied, and the detailed microstructures and phase composition of the coatings were analyzed using x-ray diffraction, scanning electron microscope with energy dispersive spectrometer, and transmission electron microscope. The results show that both coatings are structurally featured by slatted layers, consisting of amorphous phase, Cr2O3, Ni3Al, and Al2O3. The hot corrosion resistance of AlO-CrO/NiCoCrAlYTa coating is better than that of AlO/NiCoCrAlYTa coating. This improvement is attributed to lower porosity and more compact Cr2O3 in AlO-CrO/NiCoCrAlYTa coating which performs better than Al2O3 in blocking further inward progress of corrosion and oxidization.

  1. Deep SiO2 etching with Al and AlN masks for MEMS devices

    NASA Astrophysics Data System (ADS)

    Bliznetsov, Vladimir; Mao Lin, Hua; Zhang, Yue Jia; Johnson, David

    2015-08-01

    Silicon oxide-based materials such as quartz and silica are widely used in microelectromechanical systems (MEMS). One way to enhance the capability of their deep plasma etching is to increase selectivity by the use of hard masks. Although this approach was studied previously, information on the use of hard masks for the etching of silicon-oxide based materials on 200 mm substrates is scarce. We present the results of etching process development for amorphous silicon oxide using Al and AlN masks with a view of the application of the results for the etching of silica and quartz. Three gas chemistries (C4F8/O2, CF4 and SF6) and their mixtures were compared in an industrial reactive ion etch (RIE) chamber with two plasma sources. It was established that pure SF6 is the best etchant and AlN is a better mask than Al for providing higher selectivity and a sidewall angle close to vertical. A range of etching parameters for micromasking-free etching was established and etched structures of up to a 4 : 1 aspect ratio were created in 21 μm-thick oxide using the process with an etch rate of 0.32-0.36 μm min-1 and a selectivity to AlN mask of (38-49) : 1.

  2. Microstructure evolution and properties of Al/Al-Mg-Si alloy clad wire during heat treatment

    NASA Astrophysics Data System (ADS)

    Wang, Xiang; Guan, Ren-guo; Zhang, Yang; Su, Ning; Ji, Lian-ze; Li, Yuan-dong; Chen, Ti-jun

    2016-06-01

    In this paper, heat treatment was carried out on Al/Al-Mg-Si alloy clad wire, and microstructure evolution and properties of Al/Al-Mg-Si alloy clad wire during heat treatment were investigated. During solution, contents of Mg and Si in inner matrix increased due to dissolution of primary Mg2Si, and they also increased in outer matrix because Mg and Si diffused across the interface. Tensile strength of the clad wire increased firstly and then decreased, and elongation continuously increased, while conductivity continuously decreased with the increase in solution time. In aging process, Mg2Si precipitated in both inner core and outer layer, and the content and average diameter of the precipitate increased with the increase in aging time. The content of precipitate was higher, and the average diameter was bigger in inner core. Tensile strength of the clad wire increased firstly and then decreased with the increase in aging time, and the elongation continuously decreased, while the conductivity continuously increased. The peak tensile strength of 202 MPa occurred at 8 h, when the corresponding elongation was 20 % and the conductivity reached 56.07 %IACS. Even tensile strength of the prepared clad wire approximately equaled to that of Al-0.5Mg-0.35Si alloy 203 MPa, the conductivity was obviously improved from 54.2 to 56.07 %IACS.

  3. Revisiting the Al/Al2O3 Interface: Coherent Interfaces and Misfit Accommodation

    PubMed Central

    Pilania, Ghanshyam; Thijsse, Barend J.; Hoagland, Richard G.; Lazić, Ivan; Valone, Steven M.; Liu, Xiang-Yang

    2014-01-01

    We study the coherent and semi-coherent Al/α-Al2O3 interfaces using molecular dynamics simulations with a mixed, metallic-ionic atomistic model. For the coherent interfaces, both Al-terminated and O-terminated nonstoichiometric interfaces have been studied and their relative stability has been established. To understand the misfit accommodation at the semi-coherent interface, a 1-dimensional (1D) misfit dislocation model and a 2-dimensional (2D) dislocation network model have been studied. For the latter case, our analysis reveals an interface dislocation structure with a network of three sets of parallel dislocations, each with pure-edge character, giving rise to a pattern of coherent and stacking-fault-like regions at the interface. Structural relaxation at elevated temperatures leads to a further change of the dislocation pattern, which can be understood in terms of a competition between the stacking fault energy and the dislocation interaction energy at the interface. Our results are expected to serve as an input for the subsequent dislocation dynamics models to understand and predict the macroscopic mechanical behavior of Al/α-Al2O3 composite heterostructures. PMID:24670940

  4. Tribological Properties of Ti(Al,O)/Al2O3 Composite Coating by Thermal Spraying

    NASA Astrophysics Data System (ADS)

    Salman, Asma; Gabbitas, Brian; Cao, Peng; Zhang, Deliang

    The use of thermal spray coatings provides protection to the surfaces operating in severe environments. The main goal of the current work is to investigate the possibility of using a high velocity air fuel (HVAF) thermally sprayed wear resistant Ti(Al,O)/Al2O3 coating on tool steel (H13) which is used for making dies for aluminium high pressure die casting and dummy blocks aluminium extrusion. A feedstock of Ti(Al,O)/Al2O3 composite powder was produced from a mixture of Al and TiO2 powders by high energy mechanical milling, followed by a thermal reaction process. The feedstock was then thermally sprayed using a high velocity air-fuel (HVAF) technique onto H13 steel substrates to produce a composite coating. The present study describes and compares the tribological properties such as friction and sliding wear rate of the coating both at room and high temperature (700°C). The wear resistance of the coating was investigated by a tribometer using a spherical ended alumina pin as a counter body under dry and lubricating conditions. The results showed that composite coating has lower wear rate at high temperature than at room temperature without using lubricant. The composite coating was characterized using scanning electron microscopy (SEM), optical microscopy and X-ray diffractometry (XRD). This paper reports the experimental observations and discusses the wear resistance performance of the coatings at room and high temperatures.

  5. Revisiting the Al/Al2O3 Interface: Coherent Interfaces and Misfit Accommodation

    DOE PAGES

    Pilania, Ghanshyam; Thijsse, Barend J.; Hoagland, Richard G.; Lazić, Ivan; Valone, Steven M.; Liu, Xiang-Yang

    2014-03-27

    We report the coherent and semi-coherent Al/α-Al2O3 interfaces using molecular dynamics simulations with a mixed, metallic-ionic atomistic model. For the coherent interfaces, both Al-terminated and O-terminated nonstoichiometric interfaces have been studied and their relative stability has been established. To understand the misfit accommodation at the semi-coherent interface, a 1-dimensional (1D) misfit dislocation model and a 2-dimensional (2D) dislocation network model have been studied. For the latter case, our analysis reveals an interface dislocation structure with a network of three sets of parallel dislocations, each with pure-edge character, giving rise to a pattern of coherent and stacking-fault-like regions at the interface.more » Structural relaxation at elevated temperatures leads to a further change of the dislocation pattern, which can be understood in terms of a competition between the stacking fault energy and the dislocation interaction energy at the interface. In conclusion, our results are expected to serve as an input for the subsequent dislocation dynamics models to understand and predict the macroscopic mechanical behavior of Al/α-Al2O3 composite heterostructures.« less

  6. ALS 2883: Analysis of spectroscopic features

    NASA Astrophysics Data System (ADS)

    Silva, A. R.; Levenhagen, R. S.; Künzel, R.; Leister, N. V.

    2014-10-01

    ALS 2883 (RA 13^{h} 02^{m} 47^{s}, DEC -63^{o} 50' 08'', M_{v} 10.1) is the first known radio pulsar with an emission B-type companion system, discovered in 1992. The Be companion of ALS 2883 has all line profiles in the visible range in emission. This emission is a common hallmark among many Be stars, and this effect is thought to be due to the presence of a circumstellar environment. Also, the star is orbiting a X-ray source as has been detected by the XMM-Newton Science Operation Center. In this study, we present the observations of ALS 2883 made at the OPD/LNA 1.60 m telescope with the Coudé spectrograph in the range 4000 to 5000 Å and S/N simeq 200, performed in April 2011. First-order estimations of T_{eff} and log g parameters have been performed through Johnson's UBV and JHK photometric calibrations. Projected rotation velocity V sin i has been estimated through the mean of the first zeroes of the Fourier transforms of neutral helium rotation profiles adopting linear, quadratic and square-root limb-darkening laws. The physical conditions of the circumstellar envelope were estimated through the solution of the radiative transport equation assuming local thermodynamic equilibrium within a disk-shaped circumstellar environment with a Keplerian velocity field. The radiative transport equation is solved assuming the Roche model as a boundary condition in the circumstellar environment. Iterating the computations with a downhill-simplex algorithm, this analysis leads to a best solution for an envelope with T simeq 9500 K, gas density ρ simeq 2 × 10^{-15} g.cm^{-3}, internal radius r_{i} simeq 8 R_{odot} and external radius r_e simeq 30 R_{odot}, rotating with V_{rot} simeq 140 km.s^{-1} and expanding with V_{exp} simeq 90 km.s^{-1}.

  7. Orbit stability of the ALS storage ring

    SciTech Connect

    Keller, R.; Nishimura, H.; Biocca, A.

    1997-05-01

    The Advanced Light Source (ALS) storage ring, a synchrotron light source of the third generation, is specified to maintain its electron orbit stable within one tenth of the rms beam size. In the absence of a dedicated orbit feed-back system, several orbit-distorting effects were investigated, aided by a new interactive simulation tool, the code TRACY V. The effort has led to a better understanding of the behavior of a variety of accelerator subsystems and in consequence produced a substantial improvement in day-to-day orbit stability.

  8. Development of SiAlON materials

    NASA Technical Reports Server (NTRS)

    Layden, G. K.

    1977-01-01

    Cold pressing and sintering techniques were used to produce ceramic bodies in which the major phase was beta prime Si3-Al-O-N4 solid solution. A variety of foreign oxides were used to promote liquid phase sintering, and this resulted in the incorporation of additional solid phases in the ceramic bodies which controlled elevated temperature properties. None of the bodies studied to date exhibited both adequate high temperature mechanical properties and oxidation resistance. Criteria are suggested to guide the formulation of bodies with improved high temperature properties.

  9. Transformation to Ni5Al3 in a 63.0 at. pct Ni-Al alloy

    NASA Technical Reports Server (NTRS)

    Khadkikar, P. S.; Locci, I. E.; Vedula, K.; Michal, G. M.

    1993-01-01

    Microstructures of 63 at. pct P/M Ni-Al alloys with a composition close to the stoichiometry of the Ni5Al3 phase were investigated using homogenized and quenched specimens aged at low temperatures for various times. Results of analyses of XRD data and electron microscopy observations were used for quantitative phase analysis, performed to calculate the (NiAl + Ni5Al3)/Ni5Al3 phase boundary locations. The measured lattice parameters of Ni5Al3 phase formed at 823, 873, and 923 K indicated an increase in tetragonality of the phase with increasing nickel content.

  10. Acoustic resonator with Al electrodes on an AlN layer and using a GaAs substrate

    DOEpatents

    Kline, Gerald R.; Lakin, Kenneth M.

    1985-12-03

    A method of fabricating an acoustic wave resonator wherein all processing steps are accomplished from a single side of said substrate. The method involves deposition of a multi-layered Al/AlN structure on a GaAs substrate followed by a series of fabrication steps to define a resonator from said composite. The resulting resonator comprises an AlN layer between two Al layers and another layer of AlN on an exterior of one of said Al layers.

  11. High pressure sintering behavior and mechanical properties of cBN-Ti3Al and cBN-Ti3Al-Al composite materials

    NASA Astrophysics Data System (ADS)

    Li, Yu; Kou, Zili; Wang, Haikuo; Wang, Kaixue; Tang, Hongchang; Wang, Yanfei; Liu, Shenzhuo; Ren, Xiangting; Meng, Chuanming; Wang, Zhigang

    2012-12-01

    The sintering behavior and mechanical properties of cubic boron nitride (cBN) composites, using the mixture of cBN-Ti3Al and cBN-Ti3Al-Al as the starting material respectively, were investigated under high pressure and high temperature (HPHT) conditions. The results show that the samples of cBN-Ti3Al-Al sintering system have more homogeneous microstructures. Young's modulus, shear modulus, and bulk modulus of samples measured by ultrasonic measurements can reach to 782±3 GPa, 344±1 GPa, and 348±2 GPa, respectively. The hardness increases remarkably with the sintering temperature rising, and reaches to the highest value of 35.04±0.51 GPa. For the cBN-Ti3Al sintering system, the X-ray diffraction patterns of composites reveal that the chemical reactions between cBN and Ti3Al occurred at 5.0 GPa and 1300°C. The reaction mechanisms of both cBN-Ti3Al and cBN-Ti3Al-Al sintering systems are discussed in this paper.

  12. 'Ice Bucket Challenge' Funds a Boon to ALS Research

    MedlinePlus

    ... big data' in ALS research," Lucie Bruijn, ALS Association chief scientist, said in the news release. "The sophisticated gene analysis that led to this finding was only possible because of the large number ...

  13. Epitaxial Zintl aluminide SrAl4 grown on a LaAlO3 substrate

    NASA Astrophysics Data System (ADS)

    Schlipf, Lukas; Slepko, Alexander; Posadas, Agham B.; Seinige, Heidi; Dhamdhere, Ajit; Tsoi, Maxim; Smith, David J.; Demkov, Alexander A.

    2013-07-01

    Zintl phases are a class of intermetallic materials that have simultaneously ionic and covalent bonding resulting from charge transfer between two different atomic species. We present a combined first principles and experimental study of Zintl-phase SrAl4, which is grown in thin film form on the perovskite oxide LaAlO3 using molecular beam epitaxy. The structural properties are investigated using reflection-high-energy electron diffraction, x-ray diffraction, and cross-section transmission electron microscopy, which reveal relaxed epitaxial island growth. Photoelectron spectroscopy measurements verify the Zintl-Klemm nature of the bonding in the material and are utilized to determine the band offset and the work function of SrAl4, while transport measurements confirm its metallic behavior. The experimentally observed properties are confirmed using density functional calculations.

  14. LPE growth of AlN from Cu-Al-Ti solution under nitrogen atmosphere

    NASA Astrophysics Data System (ADS)

    Kamei, K.; Inoue, S.; Shirai, Y.; Tanaka, T.; Okada, N.; Yauchi, A.

    2006-05-01

    Synthesis of single crystalline AlN has long been the subjects of intensive studies since it has exceptional properties suitable for the substrate materials for optoelectronic and electronic devices. The solution growth technique has some advantages over the sublimation growth technique. Its growth temperature is generally much lower than that of the sublimation growth. The obtained crystal is believed to show superior crystallinity since it is grown under nearly equilibrium condition. In the present study we have developed a new solution growth technique using Cu and Ti as solvents under atmospheric pressure of nitrogen. By using this solution, we have grown AlN single crystalline layer on 6H-SiC substrate at relatively low growth temperatures such as 1600-1800 °C. The thickness of the grown layer was larger than 30 μm. TEM observation revealed the fairly low dislocation density such as 105/cm2 in the obtained AlN layers.

  15. Highly strained AlAs-type interfaces in InAs/AlSb heterostructures

    NASA Astrophysics Data System (ADS)

    Vallet, M.; Claveau, Y.; Warot-Fonrose, B.; Gatel, C.; Nicolai, J.; Combe, N.; Magen, C.; Teissier, R.; Baranov, A. N.; Ponchet, A.

    2016-05-01

    Spontaneously formed Al-As type interfaces of the InAs/AlSb system grown by molecular beam epitaxy for quantum cascade lasers were investigated by atomic resolution scanning transmission electron microscopy. Experimental strain profiles were compared to those coming from a model structure. High negative out-of-plane strains with the same order of magnitude as perfect Al-As interfaces were observed. The effects of the geometrical phase analysis used for strain determination were evidenced and discussed in the case of abrupt and huge variations of both atomic composition and bond length as observed in these interfaces. Intensity profiles performed on the same images confirmed that changes of chemical composition are the source of high strain fields at interfaces. The results show that spontaneously assembled interfaces are not perfect but extend over 2 or 3 monolayers.

  16. Reaction diffusion in the NiCrAl and CoCrAl systems

    NASA Technical Reports Server (NTRS)

    Levine, S. R.

    1978-01-01

    The paper assesses the effect of overlay coating and substrate composition on the kinetics of coating depletion by interdiffusion. This is accomplished by examining the constitution, kinetics and activation energies for a series of diffusion couples primarily of the NiCrAl/Ni-10Cr or CoCrAl/Ni-10Cr type annealed at temperatures in the range 1000-1205 C for times up to 500 hr. A general procedure is developed for analyzing diffusion in multicomponent multiphase systems. It is shown that by introducing the concept of beta-source strength, which can be determined from appropriate phase diagrams, the Wagner solution for consumption of a second phase in a semiinfinite couple is successfully applied to the analysis of MCrAl couples. Thus, correlation of beta-recession rate constants with couple composition, total and diffusional activation energies, and interdiffusion coefficients are determined.

  17. Precipitant diffusion and surface segregation in Al Alloys near melting point: Al 2024

    NASA Astrophysics Data System (ADS)

    Mohney, Austin; Senevirathne, Indrajith

    2012-02-01

    Industrial Al alloys are precipitant hardened with an impurity phase. Micro precipitants introduce various novel physical properties to the systems system. The diffusion of these constituents under thermal gradient was studied by sequentially increasing temperatures near melting point as it was observed to better facilitate the migration of precipitants. Study is based on Al 2024, age hardened, high strength AL alloy, annealed at incremental temperatures near melting point of 500 C and was observed in Scanning Electron Microscopy (SEM) and Energy Dispersive X ray Spectroscopy (EDX). Solvent cleaned near surface region of the alloy was investigated with observation of differential migration of constituent Cu, Fe Mg and Zn precipitants. The migrations were modeled in terms of diffusion coefficients and established literature of the participating species. Study will attempt to correlate the elemental concentration variation with applied elevated heat stress in industrial settings.

  18. Ni-Al2O3 and Ni-Al composite high-aspect-ratio microstructures

    NASA Astrophysics Data System (ADS)

    Wang, Tao; Sorrell, Melford; Kelly, Kevin W.; Ma, Evan

    1998-09-01

    High-aspect-ratio microstructures (HARMs) have a variety of potential applications in heat transfer, fluid mechanics, catalysts and other microelectromechanical systems (MEMS). The aim of this work is to demonstrate the feasibility to fabricate high performance particulate metal-matrix composite and intermetallic micromechanical structures using the LIGA process. Well-defined functionally graded Ni-Al2O3 and Ni-Al high-aspect-ratio microposts were electroformed into lithographically patterned PMMA holes from a nickel sulfamate bath containing submicron alumina and a diluted Watts bath containing microsized aluminum particles, respectively. SEM image analysis showed that the volume fraction of the alumina reached up to around 30% in the Ni-Al2O3 deposit. The Vickers microhardness of these composites is in the range of 418 through 545, which is higher than those of nickel microstructures from a similar particle-free bath and other Ni-based electrodeposits. In the work on Ni-Al electroplating, a newly developed diluted Watts bath was used to codeposit micron-sized aluminum particles. The intermetallic compound Ni3Al was formed by the reaction of nickel matrices and aluminum particles through subsequent annealing at 630 degrees Celsius. WDS and XRD analyses confirmed that the annealed coating is a two-phase (Ni-Ni3Al) composite. The maximum aluminum volume fraction reached 19% at a cathode current density of 12 mA cm-2, and the Vickers microhardness of the as-deposited coatings is in the range 392 - 515 depending on the amount of aluminum incorporated.

  19. Characterization of human sporadic ALS biomarkers in the familial ALS transgenic mSOD1(G93A) mouse model.

    PubMed

    Lilo, Eitan; Wald-Altman, Shane; Solmesky, Leonardo J; Ben Yaakov, Keren; Gershoni-Emek, Noga; Bulvik, Shlomo; Kassis, Ibrahim; Karussis, Dimitrios; Perlson, Eran; Weil, Miguel

    2013-12-01

    Amyotrophic lateral sclerosis (ALS) is a fatal neurodegenerative disorder of motor neurons. Although most cases of ALS are sporadic (sALS) and of unknown etiology, there are also inherited familial ALS (fALS) cases that share a phenotype similar to sALS pathological and clinical phenotype. In this study, we have identified two new potential genetic ALS biomarkers in human bone marrow mesenchymal stem cells (hMSC) obtained from sALS patients, namely the TDP-43 (TAR DNA-binding protein 43) and SLPI (secretory leukocyte protease inhibitor). Together with the previously discovered ones-CyFIP2 and RbBP9, we investigated whether these four potential ALS biomarkers may be differentially expressed in tissues obtained from mutant SOD1(G93A) transgenic mice, a model that is relevant for at least 20% of the fALS cases. Quantitative real-time PCR analysis of brain, spinal cord and muscle tissues of the mSOD1(G93A) and controls at various time points during the progression of the neurological disease showed differential expression of the four identified biomarkers in correlation with (i) the tissue type, (ii) the stage of the disease and (iii) the gender of the animals, creating thus a novel spatiotemporal molecular signature of ALS. The biomarkers detected in the fALS animal model were homologous to those that were identified in hMSC of our sALS cases. These results support the possibility of a molecular link between sALS and fALS and may indicate common pathogenetic mechanisms involved in both types of ALS. Moreover, these results may pave the path for using the mSOD1(G93A) mouse model and these biomarkers as molecular beacons to evaluate the effects of novel drugs/treatments in ALS.

  20. Simulation Study of Al-1Mn/Al-10Si Circular Clad Ingots Prepared by Direct Chill Casting

    NASA Astrophysics Data System (ADS)

    Wu, Li; Kang, Huijun; Chen, Zongning; Fu, Ying; Wang, Tongmin

    2016-02-01

    A modified direct chill casting process based on Novelis FusionTM Technology co-casting process was used recently to prepare Al-1Mn/Al-10Si circular clad ingots. In the current study, a comprehensive simulation model was developed to investigate the direct chill casting process for preparing the Al-1Mn/Al-10Si circular clad ingots, and a parametric study and experimental research of the direct chill casting process was conducted to explore potential success and failure casting conditions. The simulation results revealed the bonding mechanism of the Al-1Mn/Al-10Si interface in the direct chill casting process and identified the effect of certain parameters on casting performance. The results indicated that the effect of casting speed and Al-1Mn casting temperature on the variations of the minimum solid fraction of Al-1Mn at the interface is stronger than that of cooling water flow rate in inner mold, while Al-10Si casting temperature is the weakest of the four casting parameters. The corresponding experimental results verified that Al-1Mn/Al-10Si circular clad ingot with acceptable metallurgical bonding can be successfully prepared by direct chill casting process under the proper casting parameters. The thickness of diffusion zone is about 40 μm, and the fractured position in tensile test was located in the Al-1Mn alloy side which indicated the strength of the interfacial region is higher than that of Al-1Mn alloy.

  1. Comparison on the interaction of Al3+/nano-Al13 with calf thymus DNA /salmon sperm DNA

    NASA Astrophysics Data System (ADS)

    Ma, Fei; Ma, Yue; Du, Changwen; Yang, Xiaodi; Shen, Renfang

    2015-11-01

    The conformation change, binding mode and binding site between Al3+/nano-Al13 and calf thymus DNA/salmon sperm DNA were investigated by UV-vis absorption, FTIR spectra, Raman spectroscopy and CD spectra, as well as melting curves measurement. The UV-vis spectra and circular dichroism spectra results suggested that the phosphate group structure was changed when Al3+ interacted with DNA, while the double-helix was distorted when nano-Al13 interacted with DNA. The FTIR and Raman spectroscopy revealed that the binding sites were Al3+ … PO2, Al3+ … N7/guanine PO2 … Al13 … N7-C8/guanine with calf thymus DNA, and Al3+ … N3-O2/cytosine, Al3+ … N7-C8/guanine, PO2 … Al13 … N7-C8/guanine, PO2 … Al13 … N1/adenine with salmon sperm DNA, respectively. The electrostatic binding was existed between Al3+ and DNA, and the electrostatic binding and complexing were found between nano-Al13 and DNA.

  2. Mechanisms of elevated-temperature deformation in the B2 aluminides NiAl and CoAl

    NASA Technical Reports Server (NTRS)

    Yaney, D. L.; Nix, W. D.

    1988-01-01

    A strain rate change technique, developed previously for distinguishing between pure-metal and alloy-type creep behavior, was used to study the elevated-temperature deformation behavior of the intermetallic compounds NiAl and CoAl. Tests on NiAl were conducted at temperatures between 1100 and 1300 K while tests on CoAl were performed at temperatures ranging from 1200 to 1400 K. NiAl exhibits pure-metal type behavior over the entire temperature range studied. CoAl, however, undergoes a transition from pure-metal to alloy-type deformation behavior as the temperature is decreased from 1400 to 1200 K. Slip appears to be inherently more difficult in CoAl than in NiAl, with lattice friction effects limiting the mobility of dislocations at a much higher tmeperature in CoAl than in NiAl. The superior strength of CoAl at elevated temperatures may, therefore, be related to a greater lattice friction strengthening effect in CoAl than in NiAl.

  3. Precipitation of Kr after implantation into Al

    SciTech Connect

    Birtcher, R.C.; Jaeger, W.

    1985-09-01

    Transmission electron microscopy (TEM) was used to perform a systematic study of the microstructural evolution in Al as a function of the fluence received during 65 keV Kr/sup +/ ion implantation at room temperature. At the lower fluences (2 x 10/sup 16/ to 2 x 10/sup 19/ Kr/sup +/m/sup -2/), isolated dislocation loops and the evolution of a dislocation network was observed by TEM. Above fluences of 10/sup 19/ Kr/sup +/m/sup -2/, the microstructure is dominated by a high density of Kr bubbles whose average size increases with dose. The appearance of additional electron diffraction reflections indicates that the majority of the bubbles contain solid fcc Kr that is epitaxially aligned with the fcc Al matrix. Above fluences of 2 x 10/sup 20/ Kr/sup +/m/sup -2/ an increasing fraction of the Kr is in a liquid or gas-like phase. The thermal stability of the microstructure, characteristic of the different fluence regimes, was investigated up to 640/sup 0/C by in situ TEM annealing experiments.

  4. CarbAl Heat Transfer Material

    NASA Technical Reports Server (NTRS)

    Fink, Richard

    2015-01-01

    The increasing use of power electronics, such as high-current semiconductor devices and modules, within space vehicles is driving the need to develop specialty thermal management materials in both the packaging of these discrete devices and the packaging of modules consisting of these device arrays. Developed by Applied Nanotech, Inc. (ANI), CarbAl heat transfer material is uniquely characterized by its low density, high thermal diffusivity, and high thermal conductivity. Its coefficient of thermal expansion (CTE) is similar to most power electronic materials, making it an effective base plate substrate for state-of-the-art silicon carbide (SiC) super junction transistors. The material currently is being used to optimize hybrid vehicle inverter packaging. Adapting CarbAl-based substrates to space applications was a major focus of the SBIR project work. In Phase I, ANI completed modeling and experimentation to validate its deployment in a space environment. Key parameters related to cryogenic temperature scaling of CTE, thermal conductivity, and mechanical strength. In Phase II, the company concentrated on improving heat sinks and thermally conductive circuit boards for power electronic applications.

  5. Pit initiation in AlO{sub x}/Al thin films

    SciTech Connect

    Son, K.A.; Barbour, J.C.; Missert, N.; Wall, F.D.; Copeland, R.G.; Martinez, M.A.; Minor, K.G.; Buchheit, R.G.; Isaacs, H.S.

    1998-12-31

    The electrochemical responses of AlO{sub x}/Al thin films have been investigated as a function of film growth conditions which produce films with different grain orientation, size and morphology. Films with smooth, 150 nm diameter, randomly oriented grains show a higher pitting potential and lower passive current than those films with large grain-boundary grooving from a mixture of smooth micron-sized, (200)-oriented grains and 300--500 nm diameter, (220)-oriented grains. These results suggest that surface roughness from grain-boundary grooving affects the pitting resistance more strongly than does the grain boundary density.

  6. Research of the structural and electronic properties of VN/AlN/VN and AlN/VN/AlN based on DFT calculation

    NASA Astrophysics Data System (ADS)

    Díaz F, J. H.; Espitia R, M. J.; Rodriguez Martínez, J. A.

    2016-08-01

    We investigated the structural, electronic, and magnetic properties of AlN/VN/AlN and VN/AlN/VN interlayers in the wurtzite structure, via first-principles calculations using the psuedopotential method within density functional theory (DFT) as implemented in the Quantum ESPRESSO code. The total energy calculation showed that the VN/AlN/VN interlayer is energetically more favorable than the AlN/VN/AlN one. Analysis of the density of states showed that the interlayers exhibit a metallic behavior that essentially comes from the hybridization and polarization of states V-d and N-p across the Fermi level. The interlayers exhibit magnetic properties, with a magnetic moment of 4μβ/cell. Due to these properties, the superlattices can potentially be used in the field of spintronics.

  7. Influence of FeCrAl Content on Microstructure and Bonding Strength of Plasma-Sprayed FeCrAl/Al2O3 Coatings

    NASA Astrophysics Data System (ADS)

    Zhou, Liang; Luo, Fa; Zhou, Wancheng; Zhu, Dongmei

    2016-02-01

    Low-power plasma-sprayed FeCrAl/Al2O3 composite coatings with 1.5 mm thickness have been fabricated for radar absorption applications. The effects of FeCrAl content on the coating properties were studied. The FeCrAl presents in the form of a few thin lamellae and numerous particles, demonstrating relatively even distribution in all the coatings. Results show that the micro-hardness and porosity decrease with the increase in FeCrAl content. With FeCrAl content increasing from 28 to 47 wt.%, the bonding strength of the coatings with 1.5 mm thickness increases from 10.5 to 27 MPa, and the failure modes are composed of cohesive and adhesive failure, which are ascribed to the coating microstructure and the residual stress, respectively.

  8. MCrAlY bond coat with enhanced Yttrium layer

    DOEpatents

    Jablonski, Paul D; Hawk, Jeffrey A

    2015-04-21

    One or more embodiments relates to an MCrAlY bond coat comprising an MCrAlY layer in contact with a Y--Al.sub.2O.sub.3 layer. The MCrAlY layer is comprised of a .gamma.-M solid solution, a .beta.-MAl intermetallic phase, and Y-type intermetallics. The Y--Al.sub.2O.sub.3 layer is comprised of Yttrium atoms coordinated with oxygen atoms comprising the Al.sub.2O.sub.3 lattice. Both the MCrAlY layer and the Y--Al.sub.2O.sub.3 layer have a substantial absence of Y--Al oxides, providing advantage in the maintainability of the Yttrium reservoir within the MCrAlY bulk. The MCrAlY bond coat may be fabricated through application of a Y.sub.2O.sub.3 paste to an MCrAlY material, followed by heating in a non-oxidizing environment.

  9. Motor neuron death in ALS – programmed by astrocytes?

    PubMed Central

    Pirooznia, Sheila K.; Dawson, Valina L.; Dawson, Ted M.

    2014-01-01

    Motor neurons in ALS die via cell-autonomous and non-cell autonomous mechanisms. Using adult human astrocytes and motor neurons, Re et al (2014) discover that familial and sporadic ALS derived human adult astrocytes secrete neurotoxic factors that selectively kill motor neurons through necroptosis, suggesting a new therapeutic avenue. PMID:24607221

  10. Excitation BolsTORs motor neurons in ALS mice.

    PubMed

    Mattson, Mark P

    2013-10-01

    It is unclear why motor neurons selectively degenerate in amyotrophic lateral sclerosis (ALS). Saxena et al. (2013) demonstrate that excitation of motor neurons can prevent their demise in a mouse model of inherited ALS by a mechanism involving the mTOR pathway. PMID:24094096

  11. Laser ablation of Al-Ni alloys and multilayers

    NASA Astrophysics Data System (ADS)

    Roth, Johannes; Trebin, Hans-Rainer; Kiselev, Alexander; Rapp, Dennis-Michael

    2016-05-01

    Laser ablation of Al-Ni alloys and multilayers has been studied by molecular dynamics simulations. The method was combined with a two-temperature model to describe the interaction between the laser beam, the electrons, and the atoms. As a first step, electronic parameters for the alloys had to be found and the model developed originally for pure metals had to be generalized to multilayers. The modifications were verified by computing melting depths and ablation thresholds for pure Al and Ni. Here known data could be reproduced. The improved model was applied to the alloys Al_3Ni, AlNi and AlNi_3. While melting depths and ablation thresholds for AlNi behave unspectacular, sharp drops at high fluences are observed for Al_3Ni and AlNi_3. In both cases, the reason is a change in ablation mechanism from phase explosion to vaporization. Furthermore, a phase transition occurs in Al_3Ni. Finally, Al layers of various thicknesses on a Ni substrate have been simulated. Above threshold, 8 nm Al films are ablated as a whole while 24 nm Al films are only partially removed. Below threshold, alloying with a mixture gradient has been observed in the thin layer system.

  12. Screw dislocation-induced growth spirals as emissive exciton localization centers in Al-rich AlGaN/AlN quantum wells

    SciTech Connect

    Funato, Mitsuru Banal, Ryan G.; Kawakami, Yoichi

    2015-11-15

    Screw dislocations in Al-rich AlGaN/AlN quantum wells cause growth spirals with an enhanced Ga incorporation, which create potential minima. Although screw dislocations and their surrounding potential minima suggest non-radiative recombination processes within growth spirals, in reality, screw dislocations are not major non-radiative sinks for carriers. Consequently, carriers localized within growth spirals recombine radiatively without being captured by non-radiative recombination centers, resulting in intense emissions from growth spirals.

  13. Ab initio molecular dynamics of Al irradiation-induced processes during Al{sub 2}O{sub 3} growth

    SciTech Connect

    Music, Denis; Nahif, Farwah; Friederichsen, Niklas; Schneider, Jochen M.; Sarakinos, Kostas

    2011-03-14

    Al bombardment induced structural changes in {alpha}-Al{sub 2}O{sub 3} (R-3c) and {gamma}-Al{sub 2}O{sub 3} (Fd-3m) were studied using ab initio molecular dynamics. Diffusion and irradiation damage occur for both polymorphs in the kinetic energy range from 3.5 to 40 eV. However, for {gamma}-Al{sub 2}O{sub 3}(001) subplantation of impinging Al causes significantly larger irradiation damage and hence larger mobility as compared to {alpha}-Al{sub 2}O{sub 3}. Consequently, fast diffusion along {gamma}-Al{sub 2}O{sub 3}(001) gives rise to preferential {alpha}-Al{sub 2}O{sub 3}(0001) growth, which is consistent with published structure evolution experiments.

  14. First-principles investigation of mechanical behavior of B2 type aluminides: FeAl and NiAl

    SciTech Connect

    Fu, C.L.; Yoo, M.H.

    1990-01-01

    First-principles calculations of the elastic constants, shear fault energies, and cleavage strength of NiAl and FeAl are presented. For NiAl, we find that the dissociation of {l angle}111{r angle} superdislocation into partial dislocations is unlikely, due to a high antiphase boundary energy and a weak repulsive elastic force between partial dislocations. FeAl has a high ideal cleavage strength as a result of the directional d-bond formation at the Fe sites. The strong ordering behavior of NiAl is explained in terms of the Al-to-Ni charge transfer and the repulsive interaction between Al atoms. The spontaneous glide decomposition of the {l angle}111{r angle} superdislocation in NiAl is also discussed. 8 refs., 2 figs., 2 tabs.

  15. Interdiffusion and intrinsic diffusion in the NiAl /delta/ phase of the Al-Ni system

    NASA Technical Reports Server (NTRS)

    Shankar, S.; Seigle, L. L.

    1978-01-01

    Interdiffusion coefficients at 950 to 1150 C and the ratio of intrinsic diffusion coefficients at 1100 C were measured as functions of composition in the NiAl (delta) phase of the Al-Ni system, using a vapor-solid technique. Diffusivity values were also obtained for the Ni3Al (epsilon) and Ni (Al) solid solution (zeta) phases from 950 to 1150 C. The interdiffusion coefficient in NiAl (delta) varies several orders of magnitude over the delta phase field with a deep minimum in the diffusivity-composition curve at 48 to 49 at% Al. The ratio of intrinsic diffusion coefficients DNi/DAl, in the delta phase also varies with composition from a value of 3 to 3.5 below 50 at% Al to 0.1 or less above 50 at% Al.

  16. Direct synthesis of nanoporous carbon nitride fibers using Al-based porous coordination polymers (Al-PCPs).

    PubMed

    Hu, Ming; Reboul, Julien; Furukawa, Shuhei; Radhakrishnan, Logudurai; Zhang, Yuanjian; Srinivasu, Pavuluri; Iwai, Hideo; Wang, Hongjing; Nemoto, Yoshihiro; Suzuki, Norihiro; Kitagawa, Susumu; Yamauchi, Yusuke

    2011-07-28

    We report a new synthetic route for preparation of nanoporous carbon nitride fibers with graphitic carbon nitride polymers, by calcination of Al-based porous coordination polymers (Al-PCPs) with dicyandiamide (DCDA) under a nitrogen atmosphere.

  17. Structure of oxides prepared by decomposition of layered double Mg–Al and Ni–Al hydroxides

    SciTech Connect

    Cherepanova, Svetlana V.; Leont’eva, Natalya N.; Arbuzov, Aleksey B.; Drozdov, Vladimir A.; Belskaya, Olga B.; Antonicheva, Nina V.

    2015-05-15

    Abstracts: Thermal decomposition of Mg–Al and Ni–Al layered double hydroxides LDH at temperatures lower than 800 °C leads to the formation of oxides with different structures. Mg–Al oxide has a very defective structure and consists of octahedral layers as in periclase MgO and mixed octahedral–tetrahedral layers as in spinel MgAl{sub 2}O{sub 4}. Mixed Ni–Al oxide has a sandwich-like structure, consisting of a core with Al-doped NiO-like structure and some surface layers with spinel NiAl{sub 2}O{sub 4} structure epitaxial connected with the core. Suggested models were verified by simulation of X-ray diffraction patterns using DIFFaX code, as well as HRTEM, IR-, UV-spectroscopies, and XPS. - Graphical abstract: In the Mg–Al layered double hydroxide Al{sup 3+} ions migrate into interlayers during decomposition. The Mg–Al oxide represents sequence of octahedral and octahedral–tetrahedral spinel layers with vacancies. The Ni–Al oxide has a sandwich-like structure with NiO-like core and surface spinel layers as a result of migration of Al{sup 3+} ions on the surface. The models explain the presence and absence of “memory effect” for the Mg–Al and Ni–Al oxides, respectively. - Highlights: • We study products of Mg(Ni)–Al LDH decomposition by calcination at 500(400)–800 °C. • In Mg–Al/Ni–Al LDH Al ions migrate into interlayers/on the surface during decomposition. • Mg–Al oxide represents sequence of periclase- and spinel-like layers with vacancies. • Ni–Al oxide has a sandwich-like structure with NiO-like core and surface spinel layers. • The models explain the presence/absence of “memory effect” for Mg–Al/Ni–Al oxides.

  18. Role of Tricoordinate Al Sites in CH3ReO3/Al2O3 Olefin Metathesis Catalysts.

    PubMed

    Valla, Maxence; Wischert, Raphael; Comas-Vives, Aleix; Conley, Matthew P; Verel, René; Copéret, Christophe; Sautet, Philippe

    2016-06-01

    Re2O7 supported on γ-alumina is an alkene metathesis catalyst active at room temperature, compatible with functional groups, but the exact structures of the active sites are unknown. Using CH3ReO3/Al2O3 as a model for Re2O7/Al2O3, we show through a combination of reactivity studies, in situ solid-state NMR, and an extensive series of DFT calculations, that μ-methylene structures (Al-CH2-ReO3-Al) containing a Re═O bound to a tricoordinated Al (AlIII) and CH2 bound to a four-coordinated Al (AlIVb) are the precursors of the most active sites for olefin metathesis. The resting state of CH3ReO3/Al2O3 is a distribution of μ-methylene species formed by the activation of the C-H bond of CH3ReO3 on different surface Al-O sites. In situ reaction with ethylene results in the formation of Re metallacycle intermediates, which were studied in detail through a combination of solid-state NMR experiments, using labeled ethylene, and DFT calculations. In particular, we were able to distinguish between metallacycles in TBP (trigonal-bipyramidal) and SP (square-pyramidal) geometry, the latter being inactive and detrimental to catalytic activity. The SP sites are more likely to be formed on other Al sites (AlIVa/AlIVa). Experimentally, the activity of CH3ReO3/Al2O3 depends on the activation temperature of alumina; catalysts activated at or above 500 °C contain more active sites than those activated at 300 °C. We show that the dependence of catalytic activity on the Al2O3 activation temperature is related to the quantity of available AlIII-defect sites and adsorbed H2O.

  19. Role of Tricoordinate Al Sites in CH3ReO3/Al2O3 Olefin Metathesis Catalysts.

    PubMed

    Valla, Maxence; Wischert, Raphael; Comas-Vives, Aleix; Conley, Matthew P; Verel, René; Copéret, Christophe; Sautet, Philippe

    2016-06-01

    Re2O7 supported on γ-alumina is an alkene metathesis catalyst active at room temperature, compatible with functional groups, but the exact structures of the active sites are unknown. Using CH3ReO3/Al2O3 as a model for Re2O7/Al2O3, we show through a combination of reactivity studies, in situ solid-state NMR, and an extensive series of DFT calculations, that μ-methylene structures (Al-CH2-ReO3-Al) containing a Re═O bound to a tricoordinated Al (AlIII) and CH2 bound to a four-coordinated Al (AlIVb) are the precursors of the most active sites for olefin metathesis. The resting state of CH3ReO3/Al2O3 is a distribution of μ-methylene species formed by the activation of the C-H bond of CH3ReO3 on different surface Al-O sites. In situ reaction with ethylene results in the formation of Re metallacycle intermediates, which were studied in detail through a combination of solid-state NMR experiments, using labeled ethylene, and DFT calculations. In particular, we were able to distinguish between metallacycles in TBP (trigonal-bipyramidal) and SP (square-pyramidal) geometry, the latter being inactive and detrimental to catalytic activity. The SP sites are more likely to be formed on other Al sites (AlIVa/AlIVa). Experimentally, the activity of CH3ReO3/Al2O3 depends on the activation temperature of alumina; catalysts activated at or above 500 °C contain more active sites than those activated at 300 °C. We show that the dependence of catalytic activity on the Al2O3 activation temperature is related to the quantity of available AlIII-defect sites and adsorbed H2O. PMID:27140286

  20. 77 FR 73732 - In the Matter of the Amendment of the Designation of al-Qa'ida in Iraq, aka Jam'at al Tawhid wa...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-11

    ... fi Bilad al-Rafidayn, aka The Organization of al-Jihad's Base of Operations in Iraq, aka al-Qaida of Jihad in Iraq, aka al-Qaida in Iraq, aka al-Qaida in Mesopotamia, aka al-Qaida in the Land of the Two Rivers, aka al-Qaida of the Jihad in the Land of the Two Rivers, aka al-Qaida of Jihad......