Estimation and Optimization of the Parameters Preserving the Lustre of the Fabrics

NASA Astrophysics Data System (ADS)

Prodanova, Krasimira

2009-11-01

The paper discusses the optimization of the continuance of the Damp-Heating Process of a steaming iron press machine, and the preserving of the lustre of the fabrics. In order to be obtained high qualitative damp-heating processing, it is necessary to monitor parameters such as temperature, damp, and pressure during the process. The purpose of the present paper is a mathematical model to be constructed that adequately describes the technological process using multivariate data analysis. It was established that the full factorial design of type 23 is not adequate. The research has proceeded with central rotatable design of experiment. The obtained model adequately describes the technological process of damp-heating treatment in the defined factor space. The present investigation is helpful to the technological improvement and modernization in sewing companies.

Turning on the care coordination switch in rural primary care: voices from the practices--clinician champions, clinician partners, administrators, and nurse care managers.

PubMed

Fagnan, Lyle J; Dorr, David A; Davis, Melinda; McGinnis, Paul; Mahler, Jo; King, Molly McCarthy; Michaels, LeAnn

2011-01-01

This study sought to understand the acceptability and feasibility of office-based nurse care management in medium to large rural primary care practices. A qualitative assessment of Care Management Plus (a focused medical home model for complex patients) implementation was conducted using semistructured interviews with 4 staff cohorts. Cohorts included clinician champions, clinician partners, practice administrators, and nurse care managers. Seven key implementation attributes were: a proven care coordination program; adequate staffing; practice buy-in; adequate time; measurement; practice facilitation; and functional information technology. Although staff was positive about the care coordination concept, model acceptability was varied and additional study is required to determine sustainability.

Modelling and Decision Support of Clinical Pathways

NASA Astrophysics Data System (ADS)

Gabriel, Roland; Lux, Thomas

The German health care market is under a rapid rate of change, forcing especially hospitals to provide high-quality services at low costs. Appropriate measures for more effective and efficient service provision are process orientation and decision support by information technology of clinical pathway of a patient. The essential requirements are adequate modelling of clinical pathways as well as usage of adequate systems, which are capable of assisting the complete path of a patient within a hospital, and preferably also outside of it, in a digital way. To fulfil these specifications the authors present a suitable concept, which meets the challenges of well-structured clinical pathways as well as rather poorly structured diagnostic and therapeutic decisions, by interplay of process-oriented and knowledge-based hospital information systems.

Spacecraft Jitter Attenuation Using Embedded Piezoelectric Actuators

NASA Technical Reports Server (NTRS)

Belvin, W. Keith

1995-01-01

Remote sensing from spacecraft requires precise pointing of measurement devices in order to achieve adequate spatial resolution. Unfortunately, various spacecraft disturbances induce vibrational jitter in the remote sensing instruments. The NASA Langley Research Center has performed analysis, simulations, and ground tests to identify the more promising technologies for minimizing spacecraft pointing jitter. These studies have shown that the use of smart materials to reduce spacecraft jitter is an excellent match between a maturing technology and an operational need. This paper describes the use of embedding piezoelectric actuators for vibration control and payload isolation. In addition, recent advances in modeling, simulation, and testing of spacecraft pointing jitter are discussed.

The technology acceptance model: predicting nurses' intention to use telemedicine technology (eICU).

PubMed

Kowitlawakul, Yanika

2011-07-01

The purposes of this study were to determine factors and predictors that influence nurses' intention to use the eICU technology, to examine the applicability of the Technology Acceptance Model in explaining nurses' intention to use the eICU technology in healthcare settings, and to provide psychometric evidence of the measurement scales used in the study. The study involved 117 participants from two healthcare systems. The Telemedicine Technology Acceptance Model was developed based on the original Technology Acceptance Model that was initially developed by Fred Davis in 1986. The eICU Acceptance Survey was used as an instrument for the study. Content validity was examined, and the reliability of the instrument was tested. The results show that perceived usefulness is the most influential factor that influences nurses' intention to use the eICU technology. The principal factors that influence perceived usefulness are perceived ease of use, support from physicians, and years working in the hospital. The model fit was reasonably adequate and able to explain 58% of the variance (R = 0.58) in intention to use the eICU technology with the nursing sample.

Adolescent Sleep and the Impact of Technology Use Before Sleep on Daytime Function.

PubMed

Johansson, Ann E E; Petrisko, Maria A; Chasens, Eileen R

2016-01-01

Technology has become pervasive in our culture, particularly among adolescents. The purpose of this study is to examine associations between use of technology before sleep and daytime function in adolescents. This study is a secondary analysis of respondents aged 13 to 21 years (N = 259) from the 2011 National Sleep Foundation's Sleep in America Poll. The survey included questions on demographics, sleep habits, and use of technology in the hour before bedtime. Daytime sleepiness was assessed with the Epworth Sleepiness Scale (ESS). Student's t-tests, Mann-Whitney U, and Fischer's exact tests were performed to detect differences in demographics, sleep duration, and technology use in the total sample, and between respondents with "adequate" compared to "inadequate" sleep. Correlations were calculated between technology frequency and daytime function. Adolescents had mean sleep duration of 7.3 ± 1.3 h. Almost all respondents (97%) used some form of technology before sleep. Increased technology use and the frequency of being awoken in the night by a cell phone were significantly associated with waking too early, waking unrefreshed, and daytime sleepiness (p < 0.05). Adolescents who reported "inadequate" sleep had shorter sleep duration, greater frequency of technology use before bedtime, feeling unrefreshed on waking, and greater daytime sleepiness than those reporting "adequate" sleep (all p-values < 0.05). Technology use before sleep by adolescents had negative consequences on nighttime sleep and on daytime function. Healthcare professionals who interact with adolescents should encourage technology to be curtailed before bedtime and for adolescents to value obtaining adequate sleep. Copyright © 2016 Elsevier Inc. All rights reserved.

Obstructive sleep apnea devices for out-of-center (OOC) testing: technology evaluation.

PubMed

Collop, Nancy A; Tracy, Sharon L; Kapur, Vishesh; Mehra, Reena; Kuhlmann, David; Fleishman, Sam A; Ojile, Joseph M

2011-10-15

Guidance is needed to help clinicians decide which out-of-center (OOC) testing devices are appropriate for diagnosing obstructive sleep apnea (OSA). A new classification system that details the type of signals measured by these devices is presented. This proposed system categorizes OOC devices based on measurements of Sleep, Cardiovascular, Oximetry, Position, Effort, and Respiratory (SCOPER) parameters.Criteria for evaluating the devices are also presented, which were generated from chosen pre-test and post-test probabilities. These criteria state that in patients with a high pretest probability of having OSA, the OOC testing device has a positive likelihood ratio (LR+) of 5 or greater coinciding with an in-lab-polysomnography (PSG)-generated apnea hypopnea index (AHI) ≥ 5, and an adequate sensitivity (at least 0.825).Since oximetry is a mandatory signal for scoring AHI using PSG, devices that do not incorporate oximetry were excluded. English peer-reviewed literature on FDA-approved devices utilizing more than 1 signal was reviewed according to the above criteria for 6 questions. These questions specifically addressed the adequacy of different respiratory and effort sensors and combinations thereof to diagnose OSA. In summary, the literature is currently inadequate to state with confidence that a thermistor alone without any effort sensor is adequate to diagnose OSA; if a thermal sensing device is used as the only measure of respiration, 2 effort belts are required as part of the montage and piezoelectric belts are acceptable in this context; nasal pressure can be an adequate measurement of respiration with no effort measure with the caveat that this may be device specific; nasal pressure may be used in combination with either 2 piezoelectric or respiratory inductance plethysmographic (RIP) belts (but not 1 piezoelectric belt); and there is insufficient evidence to state that both nasal pressure and thermistor are required to adequately diagnose OSA. With respect to alternative devices for diagnosing OSA, the data indicate that peripheral arterial tonometry (PAT) devices are adequate for the proposed use; the device based on cardiac signals shows promise, but more study is required as it has not been tested in the home setting; for the device based on end-tidal CO(2) (ETCO(2)), it appears to be adequate for a hospital population; and for devices utilizing acoustic signals, the data are insufficient to determine whether the use of acoustic signals with other signals as a substitute for airflow is adequate to diagnose OSA.Standardized research is needed on OOC devices that report LR+ at the appropriate AHI (≥ 5) and scored according to the recommended definitions, while using appropriate research reporting and methodology to minimize bias.

Command and Control in a Complex World

DTIC Science & Technology

2012-05-22

definition of command and control does not adequately address changes introduced through technology trends, our understanding of the global operating...processes. The current joint definition of command and control does not adequately address changes introduced through technology trends, our...the problem is actually solved.  There are no  definitive ,  objective solutions to wicked problems.  For a complete  definition  of wicked problems, see

Circularity measuring system: A shape gauge designed especially for use on large objects

NASA Technical Reports Server (NTRS)

Rohrkaste, G. R.

1990-01-01

The Circularity Measuring System (CMS) was developed to make an in-situ determination of shape similarity for selected fit large cylinders (RSRM segments). It does this to a repeatable accuracy of 0.10 mm (0.004 inch). This is less that the goal of 0.07 mm (0.003 inch), but was determined adequate because of the addition of an assembly aid that increased the entry chamfer of the clevis side of the joint. The usefulness of the CMS is demonstrated by the application to measurements other than its specified design purpose, such as submarine hull circularity, SRM mid-case circularity, as well as circularity of interfacing SRM tooling, specifically the rounding devices and horizontal disassembly devices. Commercialization of the tool is being pursued, since it is an enhancement of metrology technology for circularity determination. The most accurate in-situ technology it replaces is determined from a template. The CMS is an improvement in accuracy and operation.

Enzyme Analysis to Determine Glucose Content

NASA Astrophysics Data System (ADS)

Carpenter, Charles; Ward, Robert E.

Enzyme analysis is used for many purposes in food science and technology. Enzyme activity is used to indicate adequate processing, to assess enzyme preparations, and to measure constituents of foods that are enzyme substrates. In this experiment, the glucose content of corn syrup solids is determined using the enzymes, glucose oxidase and peroxidase. Glucose oxidase catalyzes the oxidation of glucose to form hydrogen peroxide (H2O2), which then reacts with a dye in the presence of peroxidase to give a stable colored product.

Technology Integration in a Science Classroom: Preservice Teachers' Perceptions

ERIC Educational Resources Information Center

Rehmat, Abeera P.; Bailey, Janelle M.

2014-01-01

The challenge of preparing students for the information age has prompted administrators to increase technology in the public schools. Yet despite the increased availability of technology in schools, few teachers are integrating technology for instructional purposes. Preservice teachers must be equipped with adequate content knowledge of technology…

A study of the river velocity measurement techniques and analysis methods

NASA Astrophysics Data System (ADS)

Chung Yang, Han; Lun Chiang, Jie

2013-04-01

Velocity measurement technology can be traced back to the pitot tube velocity measurement method in the 18th century and today's velocity measurement technology use the acoustic and radar technology, with the Doppler principle developed technology advances, in order to develop the measurement method is more suitable for the measurement of velocity, the purpose is to get a more accurate measurement data and with the surface velocity theory, the maximum velocity theory and the indicator theory to obtain the mean velocity. As the main research direction of this article is to review the literature of the velocity measurement techniques and analysis methods, and to explore the applicability of the measurement method of the velocity measurement instruments, and then to describe the advantages and disadvantages of the different mean velocity profiles analysis method. Adequate review of the references of this study will be able to provide a reference for follow-up study of the velocity measurement. Review velocity measurement literature that different velocity measurement is required to follow the different flow conditions measured be upgraded its accuracy, because each flow rate measurement method has its advantages and disadvantages. Traditional velocity instrument can be used at low flow and RiverRAD microwave radar or imaging technology measurement method may be applied in high flow. In the tidal river can use the ADCP to quickly measure river vertical velocity distribution. In addition, urban rivers may be used the CW radar to set up on the bridge, and wide rivers can be used RiverRAD microwave radar to measure the velocities. Review the relevant literature also found that using Ultrasonic Doppler Current Profiler with the Chiu's theory to the velocity of observing automation work can save manpower and resources to improve measurement accuracy, reduce the risk of measurement, but the great variability of river characteristics in Taiwan and a lot of drifting floating objects in water in high flow, resulting in measurement automation work still needs further study. If the priority for the safety of personnel and instruments, we can use the non-contact velocity measurement method with the theoretical analysis method to achieve real-time monitoring.

National environmental observing system to mitigate the effects of nuclear-biological-chemical (NBC) attacks: strategic and tactical

NASA Astrophysics Data System (ADS)

Fleming, Rex J.

2003-09-01

The challenge of obtaining an adequate environmental support system to help mitigate the effects of various terrorist generated plumes is articulated and a fiscally responsible solution is presented. A substantially improved national system of upper air data observing systems serves as a powerful information source prior to a terrorist event. A mobile tactical observing system for measuring the environment and for measuring the composition and intensity of the plume is implemented immediately following an event. Only proven and tested technologies are used. Program costs, benefits for the fight against terrorism, and multiple benefits to other aspects of the economy are summarized.

Measurement of glucose area under the curve using minimally invasive interstitial fluid extraction technology: evaluation of glucose monitoring concepts without blood sampling.

PubMed

Sato, Toshiyuki; Okada, Seiki; Hagino, Kei; Asakura, Yoshihiro; Kikkawa, Yasuo; Kojima, Junko; Watanabe, Toshihiro; Maekawa, Yasunori; Isobe, Kazuki; Koike, Reona; Nakajima, Hiromu; Asano, Kaoru

2011-12-01

Monitoring postprandial hyperglycemia is crucial in treating diabetes, although its dynamics make accurate monitoring difficult. We developed a new technology for monitoring postprandial hyperglycemia using interstitial fluid (ISF) extraction technology without blood sampling. The glucose area under the curve (AUC) using this system was measured as accumulated ISF glucose (IG) with simultaneous calibration with sodium ions. The objective of this study was to evaluate this technological concept in healthy individuals. Minimally invasive ISF extraction technology (MIET) comprises two steps: pretreatment with microneedles and ISF accumulation over a specific time by contact with a solvent. The correlation between glucose and sodium ion levels using MIET was evaluated in 12 subjects with stable blood glucose (BG) levels during fasting. BG and IG time courses were evaluated in three subjects to confirm their relationship while BG was fluctuating. Furthermore, the accuracy of glucose AUC measurements by MIET was evaluated several hours after a meal in 30 subjects. A high correlation was observed between glucose and sodium ion levels when BG levels were stable (R=0.87), indicating that sodium ion is a good internal standard for calibration. The variation in IG and BG with MIET was similar, indicating that IG is an adequate substitute for BG. Finally, we showed a strong correlation (R=0.92) between IG-AUC and BG-AUC after a meal. These findings validate the adequacy of glucose AUC measurements using MIET. Monitoring glucose using MIET without blood sampling may be beneficial to patients with diabetes.

25 CFR 542.16 - What are the minimum internal control standards for information technology?

Code of Federal Regulations, 2011 CFR

2011-04-01

... information technology? 542.16 Section 542.16 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE... standards for information technology? Link to an amendment published at 73 FR 60498, Oct. 10, 2008. This... adequately segregated and monitored to prevent error in general information technology procedures to go...

Emerging Technologies in Adult Literacy and Language Education

ERIC Educational Resources Information Center

Warschauer, Mark; Liaw, Meei-Ling

2010-01-01

Although information and communication technologies have become an integral part of life in the United States, they have not yet been adequately integrated into adult language and literacy programs. This raises concerns because of the potential value of technology for enhancing learning and because of the vital role of technological proficiency as…

High Technology Technical Training Needs Assessment. Final Report 1983-84.

ERIC Educational Resources Information Center

Middlesex County Coll., Edison, NJ.

A project sought to produce adequate data on high technology training needs in New Jersey's Middlesex County College's service area. Of 168 individuals at high technology companies who were sent surveys, 52 returned usable surveys. Respondents supplied information on the impact of high technology on the company over the next five years, the…

25 CFR 542.16 - What are the minimum internal control standards for information technology?

Code of Federal Regulations, 2010 CFR

2010-04-01

... information technology? 542.16 Section 542.16 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE... standards for information technology? Link to an amendment published at 73 FR 60498, Oct. 10, 2008. This... adequately segregated and monitored to prevent error in general information technology procedures to go...

Epidermal electronics.

PubMed

Kim, Dae-Hyeong; Lu, Nanshu; Ma, Rui; Kim, Yun-Soung; Kim, Rak-Hwan; Wang, Shuodao; Wu, Jian; Won, Sang Min; Tao, Hu; Islam, Ahmad; Yu, Ki Jun; Kim, Tae-il; Chowdhury, Raeed; Ying, Ming; Xu, Lizhi; Li, Ming; Chung, Hyun-Joong; Keum, Hohyun; McCormick, Martin; Liu, Ping; Zhang, Yong-Wei; Omenetto, Fiorenzo G; Huang, Yonggang; Coleman, Todd; Rogers, John A

2011-08-12

We report classes of electronic systems that achieve thicknesses, effective elastic moduli, bending stiffnesses, and areal mass densities matched to the epidermis. Unlike traditional wafer-based technologies, laminating such devices onto the skin leads to conformal contact and adequate adhesion based on van der Waals interactions alone, in a manner that is mechanically invisible to the user. We describe systems incorporating electrophysiological, temperature, and strain sensors, as well as transistors, light-emitting diodes, photodetectors, radio frequency inductors, capacitors, oscillators, and rectifying diodes. Solar cells and wireless coils provide options for power supply. We used this type of technology to measure electrical activity produced by the heart, brain, and skeletal muscles and show that the resulting data contain sufficient information for an unusual type of computer game controller.

[Modern technologies and prospects of rehabilitation of patients after ischemic stroke].

PubMed

Ekusheva, E V

Despite the great achievements in the field of neurorehabilitation, a significant proportion of patients after an ischemic stroke have persistent motor disturbances even after timely and adequately carried out restorative measures. The article discusses the issues of neuroplasticity, modern diagnostic technologies for studying this phenomenon; prognostic factors for recovery deficit following stroke and determining the effectiveness of ongoing treatment. The principles of neuroprotective therapy in ischemic stroke are considered, which is a pathogenetically justified direction at all stages of restorative treatment after cerebral circulation disorders. One of the most studied original cytoprotectors, demonstrating safety, efficacy and good tolerability, is cytoflavin. The results of numerous clinical trials have revealed a significant positive clinical and morphological dynamics when taking cytoflavin in patients after ischemic stroke.

Epidermal Electronics

NASA Astrophysics Data System (ADS)

Kim, Dae-Hyeong; Lu, Nanshu; Ma, Rui; Kim, Yun-Soung; Kim, Rak-Hwan; Wang, Shuodao; Wu, Jian; Won, Sang Min; Tao, Hu; Islam, Ahmad; Yu, Ki Jun; Kim, Tae-il; Chowdhury, Raeed; Ying, Ming; Xu, Lizhi; Li, Ming; Chung, Hyun-Joong; Keum, Hohyun; McCormick, Martin; Liu, Ping; Zhang, Yong-Wei; Omenetto, Fiorenzo G.; Huang, Yonggang; Coleman, Todd; Rogers, John A.

2011-08-01

We report classes of electronic systems that achieve thicknesses, effective elastic moduli, bending stiffnesses, and areal mass densities matched to the epidermis. Unlike traditional wafer-based technologies, laminating such devices onto the skin leads to conformal contact and adequate adhesion based on van der Waals interactions alone, in a manner that is mechanically invisible to the user. We describe systems incorporating electrophysiological, temperature, and strain sensors, as well as transistors, light-emitting diodes, photodetectors, radio frequency inductors, capacitors, oscillators, and rectifying diodes. Solar cells and wireless coils provide options for power supply. We used this type of technology to measure electrical activity produced by the heart, brain, and skeletal muscles and show that the resulting data contain sufficient information for an unusual type of computer game controller.

Measuring Children’s Media Use in the Digital Age

PubMed Central

Vandewater, Elizabeth A.; Lee, Sook-Jung

2009-01-01

In this new and rapidly changing era of digital technology, there is increasing consensus among media scholars that there is an urgent need to develop measurement approaches which more adequately capture media use The overarching goal of this paper is facilitate the development of measurement approaches appropriate for capturing children’s media use in the digital age. The paper outlines various approaches to measurement, focusing mainly on those which have figured prominently in major existing studies of children’s media use. We identify issues related to each technique, including advantages and disadvantages. We also include a review of existing empirical comparisons of various methodologies. The paper is intended to foster discussion of the best ways to further research and knowledge regarding the impact of media on children. PMID:19763246

A catalogue of devices applicable to the measurement of boundary layers and wakes on flight vehicles

NASA Technical Reports Server (NTRS)

Miley, S. J.

1972-01-01

A literature search was conducted to assemble a catalog of devices and techniques which have possible application to boundary layer and wake measurements on flight vehicles. The indices used in the search were NACA, NASA STAR, IAA, USGRDR and Applied Science and Technology Index. The period covered was 1950 through 1970. The devices contained in the catalog were restricted to those that provided essentially direct measurement of velocities, pressures and shear stresses. Pertinent material was included in the catalog if it contained either an adequate description of a device and associated performance data or a presentation of applicable information on a particular measurement theory and/or technique. When available, illustrations showing the configuration of the device and test condition data were also included.

12 CFR Appendix A to Part 1720 - Policy Guidance; Minimum Safety and Soundness Requirements

Code of Federal Regulations, 2011 CFR

2011-01-01

... effectively and to model the effect of differing interest rate scenarios on the Enterprise's financial... liquidity under varying scenarios. IV. Information technology. An Enterprise should establish and implement... functions; iv. Adequate testing and review of audited areas together with adequate documentation of findings...

A Multifactor Approach to Research in Instructional Technology.

ERIC Educational Resources Information Center

Ragan, Tillman J.

In a field such as instructional design, explanations of educational outcomes must necessarily consider multiple input variables. To adequately understand the contribution made by the independent variables, it is helpful to have a visual conception of how the input variables interrelate. Two variable models are adequately represented by a two…

Technology assessment and requirements analysis: a process to facilitate decision making in picture archiving and communications system implementation.

PubMed

Radvany, M G; Chacko, A K; Richardson, R R; Grazdan, G W

1999-05-01

In a time of decreasing resources, managers need a tool to manage their resources effectively, support clinical requirements, and replace aging equipment in order to ensure adequate clinical care. To do this successfully, one must be able to perform technology assessment and capital equipment asset management. The lack of a commercial system that adequately performed technology needs assessment and addressed the unique needs of the military led to the development of an in-house Technology Assessment and Requirements Analysis (TARA) program. The TARA is a tool that provides an unbiased review of clinical operations and the resulting capital equipment requirements for military hospitals. The TARA report allows for the development of acquisition strategies for new equipment, enhances personnel management, and improves and streamlines clinical operations and processes.

DESALINATION AND WATER TREATMENT RESEARCH AT SANDIA NATIONAL LABORATORIES.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rigali, Mark J.; Miller, James E.; Altman, Susan J.

Water is the backbone of our economy - safe and adequate supplies of water are vital for agriculture, industry, recreation, and human consumption. While our supply of water today is largely safe and adequate, we as a nation face increasing water supply challenges in the form of extended droughts, demand growth due to population increase, more stringent health-based regulation, and competing demands from a variety of users. To meet these challenges in the coming decades, water treatment technologies, including desalination, will contribute substantially to ensuring a safe, sustainable, affordable, and adequate water supply for the United States. This overview documentsmore » Sandia National Laboratories' (SNL, or Sandia) Water Treatment Program which focused on the development and demonstration of advanced water purification technologies as part of the larger Sandia Water Initiative. Projects under the Water Treatment Program include: (1) the development of desalination research roadmaps (2) our efforts to accelerate the commercialization of new desalination and water treatment technologies (known as the 'Jump-Start Program),' (3) long range (high risk, early stage) desalination research (known as the 'Long Range Research Program'), (4) treatment research projects under the Joint Water Reuse & Desalination Task Force, (5) the Arsenic Water Technology Partnership Program, (6) water treatment projects funded under the New Mexico Small Business Administration, (7) water treatment projects for the National Energy Technology Laboratory (NETL) and the National Renewable Energy Laboratory (NREL), (8) Sandia- developed contaminant-selective treatment technologies, and finally (9) current Laboratory Directed Research and Development (LDRD) funded desalination projects.« less

A vector autopilot system. [aircraft attitude determination with three-axis magnetometer

NASA Technical Reports Server (NTRS)

Pietila, R.; Dunn, W. R., Jr.

1976-01-01

Current technology has evolved low cost, highly reliable solid state vector magnetometers with excellent angular resolution. This paper discusses the role of a three-axis magnetometer as a new instrument for aircraft attitude determination. Using flight data acquired by an instrumented aircraft, attitude is calculated using the earth's magnetic field vector and compared to measured attitudes. The magnetic field alone is not adequate to resolve all attitude variations and the need for a second reference angle or vector is discussed. A system combining the functions of heading determination and attitude measurement is presented to show that both functions can be implemented with essentially the same component count required to measure heading alone. It is concluded that with the correlation achieved in calculated and measured attitude there is a potential application of vector magnetometry in attitude measurement systems.

Study of ballistic mode Mercury Orbiter missions. Volume 1: Summary report

NASA Technical Reports Server (NTRS)

Hollenbeck, G. R.

1973-01-01

A summary is given of the scope, approach, and major results of the study of ballistic mode Mercury orbit missions (the Mariner Venus-Mercury spacecraft). The performance potential of ballistic flight mode is presented along with a study of alternate flight techniques. Orbit selection considerations are discussed in terms of the thermal environment of Mercury. Orbiter science experiments are summarized. Technology assessments were conducted for major subsystems appropriate to spin-stabilized and three-axis-stabilized spacecraft designs. Conclusions from this study are: ballistic mode Mercury orbiter missions offer adequate performance for effective follow-up of the MVM'73 science findings; the existing and programmed technology base is adequate for implementation of Mercury orbit spacecraft design; and when pending MVM flyby has been accomplished and the results analyzed, the data base will be adequate to support detailed orbiter spacecraft design efforts.

Transformative Learning and Technology in Adult and Vocational Education

ERIC Educational Resources Information Center

Wang, Victor C. X.; Cranton, Patricia

2013-01-01

Adult learners often fear that they will be unable to find work if they are lacking in technological skills. The media, including newspapers, magazines, and advertisements for positions often emphasize the importance of the use of technology in the workplace. It is the case that without adequate skills in the use of appropriate technologies, adult…

Comparing Graduate Courses Taught by the Same Instructor Using Competing Approaches: Traditional vs. Technology-Infused

ERIC Educational Resources Information Center

Kisicki, Todd

2012-01-01

The use of educational technologies as a tool to improve academic achievement continues to increase as more technologies becomes available to students. However, teachers are entering the classroom not fully prepared to integrate technology into their daily classroom teaching because they have not been adequately prepared to do so. Teacher…

The natech events during the 17 August 1999 Kocaeli earthquake: aftermath and lessons learned

NASA Astrophysics Data System (ADS)

Girgin, S.

2011-04-01

Natural-hazard triggered technological accidents (natechs) at industrial facilities have been recognized as an emerging risk. Adequate preparedness, proper emergency planning, and effective response are crucial for the prevention of natechs and mitigation of the consequences. Under the conditions of a natural disaster, the limited resources, the possible unavailability of mitigation measures, and the lack of adequate communication complicate the management of natechs. The analysis of past natechs is crucial for learning lessons and for preventing or preparing for future natechs. The 17 August 1999, Kocaeli earthquake, which was a devastating disaster hitting one of the most industrialized regions of Turkey, offers opportunities in this respect. Among many natechs that occurred due to the earthquake, the massive fire at the TUPRAS Izmit refinery and the acrylonitrile spill at the AKSA acrylic fiber production plant were especially important and highlight problems in the consideration of natechs in emergency planning, response to industrial emergencies during natural hazards, and information to the public during and following the incidents. The analysis of these events shows that even the largest and seemingly well-prepared facilities can be vulnerable to natechs if risks are not considered adequately.

Exploring Preschool Teachers' Technological Pedagogical Content Knowledge of Educational Games

ERIC Educational Resources Information Center

Hsu, Chung-Yuan; Liang, Jyh-Chong; Chai, Ching-Sing; Tsai, Chin-Chung

2013-01-01

Current technological pedagogical content knowledge (TPACK) studies are inclined to treat technology in a general manner, an approach which may not be able to provide adequate guidelines to improve teacher preparation and professional development when teaching with games. This study developed two new questionnaires, namely the Technological…

A Senior Teacher's Implementation of Technology Integration

ERIC Educational Resources Information Center

Tsai, Hsien-Chang

2015-01-01

This study investigated whether a senior teacher with many years of teaching experience, despite lacking adequate technology skills or contending with other barriers, can sufficiently implement technology integration in the classroom. The research was conducted between October 2013 and January 2014 and was focused on a junior high school biology…

Adequate Funding for Educational Technology

ERIC Educational Resources Information Center

Angle, Jason B.

2010-01-01

Public schools are currently operating in a pressure-cooker of accountability systems in which they must teach students to high standards and meet ever increasing targets for student proficiency, or face increasingly severe sanctions. Into this mix is thrown educational technology and the funding for that technology. The literature espouses the…

Upgrading Technology Infrastructure in California's Schools

ERIC Educational Resources Information Center

Gao, Niu; Murphy, Patrick

2016-01-01

As California schools move into online testing and online learning, an adequate technology infrastructure is no longer an option, but a necessity. To fully benefit from digital learning, schools will require a comprehensive technology infrastructure that can support a range of administrative and instructional tools. An earlier PPIC report found…

Organising Industrial Knowledge Dissemination on Frontier Technology

ERIC Educational Resources Information Center

Brintrup, A. M.; Ranasinghe, D.

2008-01-01

This paper describes the challenges faced by frontier technology education, typical among large integrated EU projects. These include an evolving nature, the scarcity of experts and established material, and the need for relevant material. Classical approaches to learning seem to not adequately address the needs of frontier technology alone.…

Unveiling the mechanisms of dressed-photon-phonon etching based on hierarchical surface roughness measure

NASA Astrophysics Data System (ADS)

Naruse, Makoto; Yatsui, Takashi; Nomura, Wataru; Kawazoe, Tadashi; Aida, Masaki; Ohtsu, Motoichi

2013-02-01

Dressed-photon-phonon (DPP) etching is a disruptive technology in planarizing material surfaces because it completely eliminates mechanical contact processes. However, adequate metrics for evaluating the surface roughness and the underlying physical mechanisms are still not well understood. Here, we propose a two-dimensional hierarchical surface roughness measure, inspired by the Allan variance, that represents the effectiveness of DPP etching while conserving the original two-dimensional surface topology. Also, we build a simple physical model of DPP etching that agrees well with the experimental observations, which clearly shows the involvement of the intrinsic hierarchical properties of dressed photons, or optical near-fields, in the surface processing.

Government/industry response to questionnaire on space mechanisms/tribology technology needs

NASA Technical Reports Server (NTRS)

Fusaro, Robert L.

1991-01-01

President Bush has proposed that the U.S. undertake an ambitious mission of manned and robotic exploration of the solar system. This mission will require advanced mechanical moving components, such as bearings, gears, seals, lubricants, etc. There has been concern in the NASA community that the current technology level in these mechanical component/tribology areas may not be adequate to meet the goals of such a mission. To attempt to answer this, NASA-Lewis has sent out a questionnaire to government and industry workers (who have been involved in space mechanism research, design, and implementation) to ask their opinion if the current space mechanisms technology (mechanical components/tribology) is adequate to meet future NASA Missions needs and goals. If they deemed that the technology base inadequate, they were asked to specify the areas of greatest need. The unedited remarks of those who responded to the survey are presented.

Detection of early changes in lung-cell cytology by flow-systems analysis techniques. Progress report, January 1--June 30, 1976

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steinkamp, J. A.; Hansen, K. M.; Wilson, J. S.

1976-08-01

This report summarizes results of preliminary experiments to develop cytological and biochemical indicators for estimating damage to respiratory epithelium exposed to toxic agents associated with the by-products of nonnuclear energy production using advanced flow-systems cell-analysis technologies. Since initiation of the program one year ago, progress has been made in obtaining adequate numbers of exfoliated lung cells from the Syrian hamster for flow analysis; cytological techniques developed on human exfoliated gynecological samples have been adapted to hamster lung epithelium for obtaining single-cell suspensions; and lung-cell samples have been initially characterized based on DNA content, total protein, nuclear and cytoplasmic size, andmore » multiangle light-scatter measurements. Preliminary results from measurements of the above parameters which recently became available are described in this report. As the flow-systems technology is adapted further to analysis of exfoliated lung cells, measurements of changes in physical and biochemical cellular properties as a function of exposure to toxic agents will be performed.« less

The Distinction Between Curative and Assistive Technology.

PubMed

Stramondo, Joseph A

2018-05-01

Disability activists have sometimes claimed their disability has actually increased their well-being. Some even say they would reject a cure to keep these gains. Yet, these same activists often simultaneously propose improvements to the quality and accessibility of assistive technology. However, for any argument favoring assistive over curative technology (or vice versa) to work, there must be a coherent distinction between the two. This line is already vague and will become even less clear with the emergence of novel technologies. This paper asks and tries to answer the question: what is it about the paradigmatic examples of curative and assistive technologies that make them paradigmatic and how can these defining features help us clarify the hard cases? This analysis will begin with an argument that, while the common views of this distinction adequately explain the paradigmatic cases, they fail to accurately pick out the relevant features of those technologies that make them paradigmatic and to provide adequate guidance for parsing the hard cases. Instead, it will be claimed that these categories of curative or assistive technologies are defined by the role the technologies play in establishing a person's relational narrative identity as a member of one of two social groups: disabled people or non-disabled people.

Application of Sensor Technology for the Efficient Positioningand Assembling of Ship Blocks

NASA Astrophysics Data System (ADS)

Lee, Sangdon; SeongbaeEun; Jung, Jai Jin; Song, Hacheol

2010-09-01

This paper proposes the application of sensor technology to assemble ship blocks efficiently. A sensor-based monitoring system is designed and implemented to improve shipbuilding productivity by reducing the labor cost for the adjustment of adequate positioning between ship blocks during pre-erection or erection stage. For the real-time remote monitoring of relative distances between two ship blocks, sensor nodes are applied to measure the distances between corresponding target points on the blocks. Highly precise positioning data can be transferred to a monitoring server via wireless network, and analyzed to support the decision making which needs to determine the next construction process; further adjustment or seam welding between the ship blocks. The developed system is expected to put to practical use, and increase the productivity during ship blocks assembly.

Orbiter entry aerothermodynamics

NASA Technical Reports Server (NTRS)

Ried, R. C.

1985-01-01

The challenge in the definition of the entry aerothermodynamic environment arising from the challenge of a reliable and reusable Orbiter is reviewed in light of the existing technology. Select problems pertinent to the orbiter development are discussed with reference to comprehensive treatments. These problems include boundary layer transition, leeward-side heating, shock/shock interaction scaling, tile gap heating, and nonequilibrium effects such as surface catalysis. Sample measurements obtained from test flights of the Orbiter are presented with comparison to preflight expectations. Numerical and wind tunnel simulations gave efficient information for defining the entry environment and an adequate level of preflight confidence. The high quality flight data provide an opportunity to refine the operational capability of the orbiter and serve as a benchmark both for the development of aerothermodynamic technology and for use in meeting future entry heating challenges.

The Relationship of Technology Funding on Adequate Yearly Progress Objectives Met in South Carolina School Districts

ERIC Educational Resources Information Center

Davis, Myron E.

2012-01-01

Technology has become more of a necessity for everyday use. It not only plays a crucial role in everyday use, it is also vital in the educational arena. Since the advent of the current technology age, technology has become an important educational tool in U.S. schools. Spending on technology. for K-12 education in the United States has jumped, and…

Minnesota anglers' fisheries-related value orientations and their stewardship of fish resources

USGS Publications Warehouse

Bruskotter, J.T.; Fulton, D.C.

2008-01-01

Research on natural resource-related values and value orientations has grown substantially over the past decade. However, existing studies have focused almost exclusively on value orientations related to wildlife and forests. This article reports data from two mail surveys of Minnesota anglers used to develop scales for measuring fisheries-related value orientations. We report results of regression analyses examining the relationship between anglers' value orientations and norms concerning fisheries stewardship and the use of technological aids to angling. Results indicate 10 items reliably measure three value orientations we termed utilitarianism, dominance, and protectionism. Regression analyses suggest anglers' stewardship norms are influenced by all three value orientation types, while support for the use of technological aids was related with protectionism and utilitarianism, but not dominance. Results suggest anglers' fisheries-related value orientations cannot be adequately captured using single domain scales. Implications for the study of natural resources-related value orientations are discussed. Copyright ?? Taylor & Francis Group, LLC.

Supporting Instructors in Overcoming Self-Efficacy and Background Barriers to Adoption

ERIC Educational Resources Information Center

Reid, Pat

2017-01-01

Most academic technology areas of higher education institutes do not feel faculty technology adoption is adequate (Hartman (EDUCAUSE Rev 43(6), 2008)). Among the barriers to instructional technology adoption are faculty self-efficacy and background. Self-efficacy encompasses the faculty member's belief or confidence in his ability to succeed.…

Next Steps: Water Technology Advances (Research)

EPA Science Inventory

This project will focus on contaminants and their impact on health, adequate removal of contaminants from various water systems, and water and resource recovery within treatment systems. It will develop the next generation of technological advances to provide guidance in support ...

Initial constructs for patient-centered outcome measures to evaluate brain-computer interfaces

PubMed Central

Andresen, Elena M.; Fried-Oken, Melanie; Peters, Betts; Patrick, Donald L.

2016-01-01

Purpose The authors describe preliminary work toward the creation of patient-centered outcome (PCO) measures to evaluate brain-computer interface (BCI) as an assistive technology for individuals with severe speech and physical impairments (SSPI). Method In Phase 1, 591 items from 15 existing measures were mapped to the International Classification of Functioning, Disability and Health (ICF). In Phase 2, qualitative interviews were conducted with eight people with SSPI and seven caregivers. Resulting text data were coded in an iterative analysis. Results Most items (79%) mapped to the ICF environmental domain; over half (53%) mapped to more than one domain. The ICF framework was well suited for mapping items related to body functions and structures, but less so for items in other areas, including personal factors. Two constructs emerged from qualitative data: Quality of Life (QOL) and Assistive Technology. Component domains and themes were identified for each. Conclusions Preliminary constructs, domains, and themes were generated for future PCO measures relevant to BCI. Existing instruments are sufficient for initial items but do not adequately match the values of people with SSPI and their caregivers. Field methods for interviewing people with SSPI were successful, and support the inclusion of these individuals in PCO research. PMID:25806719

Getting the Most from Your Interactive Whiteboard Investment: Three Guiding Principles for Designing Effective Professional Development

ERIC Educational Resources Information Center

DeSantis, Josh

2012-01-01

The adoption of interactive whiteboards (IWB) in many schools outpaced the delivery of adequate professional development on their use. Many teachers receive IWBs without adequate training on methods to use the technology to improve their instruction. Consequently, IWBs remain an underutilized resource in many classrooms. Teachers who are given…

40 CFR 57.102 - Eligibility.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., but not the cost of compliance). (i) Retrofit control technologies. (A) Sulfuric acid plant in conjunction with an adequately demonstrated replacement technology or process modification; (B) Magnesium... burning in conjunction with acid plant; (D) Electric Furnace; (E) Noranda process; (F) Fluid bed roaster...

Technology Use in Higher Education Instruction

ERIC Educational Resources Information Center

Elzarka, Sammy

2012-01-01

The significance of integrating technology use in higher education instruction is undeniable. The benefits include those related to access to instruction by underserved populations, adequately preparing students for future careers, capitalizing on best instructional practices, developing higher order thinking activities, and engaging students…

40 CFR 57.102 - Eligibility.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., but not the cost of compliance). (i) Retrofit control technologies. (A) Sulfuric acid plant in conjunction with an adequately demonstrated replacement technology or process modification; (B) Magnesium... burning in conjunction with acid plant; (D) Electric Furnace; (E) Noranda process; (F) Fluid bed roaster...

40 CFR 57.102 - Eligibility.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., but not the cost of compliance). (i) Retrofit control technologies. (A) Sulfuric acid plant in conjunction with an adequately demonstrated replacement technology or process modification; (B) Magnesium... burning in conjunction with acid plant; (D) Electric Furnace; (E) Noranda process; (F) Fluid bed roaster...

40 CFR 57.102 - Eligibility.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., but not the cost of compliance). (i) Retrofit control technologies. (A) Sulfuric acid plant in conjunction with an adequately demonstrated replacement technology or process modification; (B) Magnesium... burning in conjunction with acid plant; (D) Electric Furnace; (E) Noranda process; (F) Fluid bed roaster...

40 CFR 57.102 - Eligibility.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., but not the cost of compliance). (i) Retrofit control technologies. (A) Sulfuric acid plant in conjunction with an adequately demonstrated replacement technology or process modification; (B) Magnesium... burning in conjunction with acid plant; (D) Electric Furnace; (E) Noranda process; (F) Fluid bed roaster...

Possible environmental effects of increased coal use in California

NASA Technical Reports Server (NTRS)

Carey, D. L.

1978-01-01

If coal is to be utilized in California it must be made compatible with the state's drive toward restoring environmental quality. The impacts resulting from coal's mining and transportation, or from water consumption, water quality degradation and electric transmission line routing can probably be adequately mitigated through strong and early planning efforts, the use of improved control and process technologies, and sincere utility commitment. The socioeconomic impacts may prove somewhat more difficult to satisfactorily mitigate. Of greatest concern is adequate control of generated air pollutants and disposal of solid and liquid wastes since acceptable technologies or handling techniques have yet to be conclusively demonstrated.

A flux-gradient system for simultaneous measurement of the CH4, CO2, and H2O fluxes at a lake-air interface.

PubMed

Xiao, Wei; Liu, Shoudong; Li, Hanchao; Xiao, Qitao; Wang, Wei; Hu, Zhenghua; Hu, Cheng; Gao, Yunqiu; Shen, Jing; Zhao, Xiaoyan; Zhang, Mi; Lee, Xuhui

2014-12-16

Inland lakes play important roles in water and greenhouse gas cycling in the environment. This study aims to test the performance of a flux-gradient system for simultaneous measurement of the fluxes of water vapor, CO2, and CH4 at a lake-air interface. The concentration gradients over the water surface were measured with an analyzer based on the wavelength-scanned cavity ring-down spectroscopy technology, and the eddy diffusivity was measured with a sonic anemometer. Results of a zero-gradient test indicate a flux measurement precision of 4.8 W m(-2) for water vapor, 0.010 mg m(-2) s(-1) for CO2, and 0.029 μg m(-2) s(-1) for CH4. During the 620 day measurement period, 97%, 69%, and 67% of H2O, CO2, and CH4 hourly fluxes were higher in magnitude than the measurement precision, which confirms that the flux-gradient system had adequate precision for the measurement of the lake-air exchanges. This study illustrates four strengths of the flux-gradient method: (1) the ability to simultaneously measure the flux of H2O, CO2, and CH4; (2) negligibly small density corrections; (3) the ability to resolve small CH4 gradient and flux; and (4) continuous and noninvasive operation. The annual mean CH4 flux (1.8 g CH4 m(-2) year(-1)) at this hypereutrophic lake was close to the median value for inland lakes in the world (1.6 g CH4 m(-2) year(-1)). The system has adequate precision for CH4 flux for broad applications but requires further improvement to resolve small CO2 flux in many lakes.

15 CFR 295.6 - Criteria for selection.

Code of Federal Regulations, 2011 CFR

2011-01-01

... proposal will be funded unless the Program determines that it has scientific and technological merit and... does not have an adequate technical and commercialization plan. (a) Scientific and technological merit... innovation, the technical approach, major technical hurdles, the attendant risks, and clearly establish...

34 CFR 461.12 - What must the State plan contain?

Code of Federal Regulations, 2010 CFR

2010-07-01

... schedules, auxiliary aids and services, convenient locations, adequate transportation, and child care... Technology Education Act; (10) Describe how the particular education needs of adult immigrants, the... and Applied Technology Education Act, the Job Training Partnership Act, the Rehabilitation Act of 1973...

NDE measurements for understanding of performance: A few case studies on engineering components, human health and cultural heritage

NASA Astrophysics Data System (ADS)

Raj, Baldev; Venkatraman, B.

2013-01-01

Life cycle management involves a seamless integration of materials, design, analysis, production, manufacturing, and degradation plus, a wide variety of disciplines relating to surveillance and characterisation with adequate feedback and control. Science and technology of non-destructive evaluation (NDE) links all these domains and disciplines together in a seamless and robust manner. A number of research programs on NDE science and technology have evolved during the last four decades world over including the one at Indira Gandhi Centre for Atomic Research, Kalpakkam, initiated and nurtured by the first author. Many engineering and technology challenges pertaining to fast spectrum reactors have been successfully solved by this Centre through development of innovative sensors, procedures and coupled with strong basic science and modeling approaches. These technologies have also been selectively applied in gaining insights of human health and cultural heritage. This paper highlights some of the innovative NDE sensors and techniques developed in the field of electromagnetic NDE and their successful applications. A few interesting case studies pertaining to NDE in heritage and healthcare using acoustic and thermal methods are also presented.

Research and development of improved geothermal well logging techniques, tools and components (current projects, goals and status). Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lamers, M.D.

One of the key needs in the advancement of geothermal energy is availability of adequate subsurface measurements to aid the reservoir engineer in the development and operation of geothermal wells. Some current projects being sponsored by the U. S. Department of Energy's Division of Geothermal Energy pertaining to the development of improved well logging techniques, tools and components are described. An attempt is made to show how these projects contribute to improvement of geothermal logging technology in forming key elements of the overall program goals.

[Neuroplasticity as a basis for early rehabilitation of stroke patients].

PubMed

Putilina, M V

2011-01-01

The review is devoted to the current state of the problem of early rehabilitation of stroke patients. The rate of primary disability in patients after stroke is 3.2 per 10000 population but only 20% of previously working patients return to work. Early rehabilitation is treatment actions during a period following stroke. Adequate treatment during this period may decrease the extent of brain damage and improve disease outcome. The complexity of rehabilitation consists in using several complementary pharmacological and non-pharmacological rehabilitation measures. Appearance of new techniques of rehabilitation treatment aimed at neuroplasticity stimulation increases treatment potential of rehabilitative technologies.

[Surgical treatment of secondary peritonitis: A continuing problem. German version].

PubMed

van Ruler, O; Boermeester, M A

2016-01-01

Secondary peritonitis remains associated with high mortality and morbidity rates. Treatment of secondary peritonitis is still challenging even in the era of modern medicine. Surgical intervention for source control remains the cornerstone of treatment besides adequate antimicrobial therapy and when necessary intensive medical care measures and resuscitation. A randomized clinical trial showed that relaparotomy on demand (ROD) after initial emergency surgery was the preferred treatment strategy, irrespective of the severity and extent of peritonitis. The effective and safe use of ROD requires intensive monitoring of the patient in a setting where diagnostic tests and decision making about relaparotomy are guaranteed round the clock. The lack of knowledge on timely and adequate patient selection, together with the lack of use of easy but reliable monitoring tools seem to hamper full implementation of ROD. The accuracy of the relaparotomy decision tool is reasonable for prediction of the formation of peritonitis and necessary selection of patients for computed tomography (CT). The value of CT in the early postoperative phase is unclear. Future research and innovative technologies should focus on the additive value of CT after surgical treatment for secondary peritonitis and on the further optimization of bedside prediction tools to enhance adequate patient selection for interventions in a multidisciplinary setting.

The theory-practice gap of black carbon mitigation technologies in rural China

NASA Astrophysics Data System (ADS)

Zhang, Weishi; Li, Aitong; Xu, Yuan; Liu, Junfeng

2018-02-01

Black carbon mitigation has received increasing attention for its potential contribution to both climate change mitigation and air pollution control. Although different bottom-up models concerned with unit mitigation costs of various technologies allow the assessment of alternative policies for optimized cost-effectiveness, the lack of adequate data often forced many reluctant explicit and implicit assumptions that deviate away from actual situations of rural residential energy consumption in developing countries, where most black carbon emissions occur. To gauge the theory-practice gap in black carbon mitigation - the unit cost differences that lie between what is estimated in the theory and what is practically achieved on the ground - this study conducted an extensive field survey and analysis of nine mitigation technologies in rural China, covering both northern and southern regions with different residential energy consumption patterns. With a special focus on two temporal characteristics of those technologies - lifetimes and annual utilization rates, this study quantitatively measured the unit cost gaps and explain the technical as well as sociopolitical mechanisms behind. Structural and behavioral barriers, which have affected the technologies' performance, are discussed together with policy implications to narrow those gaps.

Colleges and universities: survival in the information age

NASA Astrophysics Data System (ADS)

Huff, Warren D.

2000-07-01

Coping with information technology (IT) planning is one of the more important, expensive, time-consuming and potentially disastrous exercises an academic institution can undertake. Those institutions that are successful in establishing administrative and academic frameworks within which rapid technological change and adaptation can occur will survive and those who stubbornly adhere to archaic styles of management and decision-making will not. IT strategies, priorities and plans must be driven by and integrated with on-going academic planning. Cross-department/unit collaboration must be encouraged and facilitated by university resources and processes. Long-range planning and identification of reasonable and attainable goals requires a leadership and governance structure in which all major stakeholders participate in setting information technology strategies, priorities, plans, standards and performance measures. A successful technology funding strategy must ensure budgeting for adequate network facilities, including assets and the people and processes to support them. Accompanying these administrative procedures should be an open dialogue on the issues brought about by apparent conflicts between University wide standardization of basic policy, procedures and technologies and the pedagogical and research initiatives which address unique collegiate or departmental needs. Network capabilities should be integrated, timely, accurate, secure and easily accessible to all who need it.

Issues that Drive Waste Management Technology Development for Space Missions

NASA Technical Reports Server (NTRS)

Fisher, John W.; Levri, Julie A.; Hogan, John A.; Wignarajah, Kanapathipillai

2005-01-01

Waste management technologies for space life support systems are currently at low development levels. Manual compaction of waste in plastic bags and overboard disposal to earth return vehicles are the primary current waste management methods. Particularly on future missions, continuance of current waste management methods would tend to expose the crew to waste hazards, forfeit recoverable resources such as water, consume valuable crew time, contaminate planetary surfaces, and risk return to Earth of extraterrestrial life. Improvement of waste management capabilities is needed for adequate management of wastes. Improvements include recovery of water and other resources, conversion of waste to states harmless to humans, long-term containment of wastes, and disposal of waste. Current NASA requirements documents on waste management are generally not highly detailed. More detailed requirements are needed to guide the development of waste management technologies that will adequately manage waste. In addition to satisfying requirements, waste management technologies must also recover resources. Recovery of resources such as water and habitat volume can reduce mission cost. This paper explores the drivers for waste management technology development including requirements and resource recovery.

Reducing Stressful Aspects of Information Technology in Public Services.

ERIC Educational Resources Information Center

Quinn, Brian

1995-01-01

Identifies sources of technological stress for public services librarians and patrons and proposes ways to reduce stress, including communicating with staff, implementing a system gradually, providing adequate training, creating proper documentation, planning, considering ergonomics in hardware and software selection, selecting a good interface,…

Photovoltaics technology program summary

NASA Astrophysics Data System (ADS)

1985-05-01

An adequate supply of energy at reasonable price is discussed. Economic efficiency and the following strategies to obtain it are suggested: (1) minimization of federal regulation in energy pricing; and (2) promote a balanced and mixed energy resource system. The development of photovoltaic energy conversion technology is summarized.

Professional Development: Catalyst for Change?

ERIC Educational Resources Information Center

Niederhauser, Dale; Wessling, Sarah

2011-01-01

Difficulty securing adequate professional development (PD) has long been a barrier to the effective implementation of educational technology. Concerns about the dearth of PD for helping teachers integrate technology into their instructional practices raised nearly 25 years ago appear to still hold true despite repeated calls for increased…

Space mechanisms needs for future NASA long duration space missions

NASA Technical Reports Server (NTRS)

Fusaro, Robert L.

1991-01-01

Future NASA long duration missions will require high performance, reliable, long lived mechanical moving systems. In order to develop these systems, high technology components, such as bearings, gears, seals, lubricants, etc., will need to be utilized. There has been concern in the NASA community that the current technology level in these mechanical component/tribology areas may not be adequate to meet the goals of long duration NASA mission such as Space Exploration Initiative (SEI). To resolve this concern, NASA-Lewis sent a questionnaire to government and industry workers (who have been involved in space mechanism research, design, and implementation) to ask their opinion if the current space mechanisms technology (mechanical components/tribology) is adequate to meet future NASA Mission needs and goals. In addition, a working group consisting of members from each NASA Center, DoD, and DOE was established to study the technology status. The results of the survey and conclusions of the working group are summarized.

Overcoming Production Disruption When Adopting New Technologies: Application of Macroergonomics and Safety Culture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naca, Christine L.; Rempel, David M.; Imada, Andy S.

Organizations are constantly responding to new technologies that require an appropriate response to remain competitive. Depending on the nature of the technologic changes, incremental changes may be adequate. However, at some point, the technical demands may be disruptive because the organization is unable to respond adequately. In this case study of a biotechnology production facility, rapidly changing customer and technological demands created a crisis manifested in rising employee injuries and production interruptions. The crisis was ultimately addressed through a comprehensive redesign of human-system relationships. Key ingredients included: a management willing to examine the entire production system, a multidisciplinary team coordinatingmore » efforts towards a common goal, engagement of staff at all levels of the organization, and the creation of feedback channels to better guide the actions of supervisors and managers. The methods used in this successful case study, involving a macroergonomics approach, can be applied to any private or public enterprise.« less

"Standards" on the Bench: Do Standards for Technological Literacy Render an Adequate Image of Technology?

ERIC Educational Resources Information Center

Nia, Mahdi G.; de Vries, Marc J.

2016-01-01

The technological literacy of students has recently become one of the primary goals of education in countries such as the USA, England, New Zealand, Australia, and so forth. However the question here is whether these educations--their long-term policy documents as well as the standards they provide in particular--address sufficient learning about…

Metrology of vibration measurements by laser techniques

NASA Astrophysics Data System (ADS)

von Martens, Hans-Jürgen

2008-06-01

Metrology as the art of careful measurement has been understood as uniform methodology for measurements in natural sciences, covering methods for the consistent assessment of experimental data and a corpus of rules regulating application in technology and in trade and industry. The knowledge, methods and tools available for precision measurements can be exploited for measurements at any level of uncertainty in any field of science and technology. A metrological approach to the preparation, execution and evaluation (including expression of uncertainty) of measurements of translational and rotational motion quantities using laser interferometer methods and techniques will be presented. The realization and dissemination of the SI units of motion quantities (vibration and shock) have been based on laser interferometer methods specified in international documentary standards. New and upgraded ISO standards are reviewed with respect to their suitability for ensuring traceable vibration measurements and calibrations in an extended frequency range of 0.4 Hz to higher than 100 kHz. Using adequate vibration exciters to generate sufficient displacement or velocity amplitudes, the upper frequency limits of the laser interferometer methods specified in ISO 16063-11 for frequencies <= 10 kHz can be expanded to 100 kHz and beyond. A comparison of different methods simultaneously used for vibration measurements at 100 kHz will be demonstrated. A statistical analysis of numerous experimental results proves the highest accuracy achievable currently in vibration measurements by specific laser methods, techniques and procedures (i.e. measurement uncertainty 0.05 % at frequencies <= 10 kHz, <= 1 % up to 100 kHz).

Modern Processing Capabilities of Analog Data from Documentation of the Great Omayyad Mosque in Aleppo, Syria, Damaged in Civil War

NASA Astrophysics Data System (ADS)

Pavelka, K.; Šedina, J.; Raeva, P.; Hůlková, M.

2017-08-01

In 1999, a big project for the documentation of the Great Omayyad mosque in Aleppo / Syria under UNESCO was conducted. By end of the last century, still analogue cameras were still being used, like the UMK Zeiss, RolleiMetric System. Digital cameras and digital automatic data processing were just starting to be on the rise and laser scanning was not relevant. In this situation, photogrammetrical measurement used stereo technology for complicated situations, and object and single-image technology for creating photoplans. Hundreds of photogrammetric images were taken. However, data processing was carried out on digital stereo plotters or workstations; it was necessary that all analogue photos were converted to digital form using a photogrammetric scanner. The outputs were adequate to the end of the last century. Nowadays, after 19 years, the photogrammetric materials still exist, but the technology and processing is completely different. Our original measurement is historical and nowadays quite obsolete. So we was it decided to explore the possibilities of the new processing of historical materials. Why? The reason is that in the last few years there has been civil war in Syria and the above mentioned monument was severely damaged. The existing historical materials therefore provide a unique opportunity for possible future reconstruction. This paper refers to the completion of existing materials, their evaluation and possibilities of new processing with today's technologies.

The Army’s Pipeline for Technological Officers: Is It Broken

DTIC Science & Technology

1993-04-15

technological education in the United States. It concludes that most Americans are improperl) educated to function in the everyday world of the next century...parts. The first part investigates the overall status of technological education in the United States. It concludes that most Americans are improperly... educate its citizens to be scientifically and technologically literate, and it must ensure that it has an adequate pool of citizens pursuing technical

Examination of State-of-the-Art Rehabilitation Technologies for the Nation’s Water Infrastructure

EPA Science Inventory

The average rate of water and wastewater system rehabilitation is not adequate to keep pace with increasing needs, quality demands, and continually deteriorating systems. Rehabilitation technologies in use today are generally effective, but there is still considerable room for i...

Testing Web Applications with Mutation Analysis

ERIC Educational Resources Information Center

Praphamontripong, Upsorn

2017-01-01

Web application software uses new technologies that have novel methods for integration and state maintenance that amount to new control flow mechanisms and new variables scoping. While modern web development technologies enhance the capabilities of web applications, they introduce challenges that current testing techniques do not adequately test…

Touching the Future by Training Students as Technology Workers.

ERIC Educational Resources Information Center

Wodarz, Nan

1999-01-01

Describes a technology consultant's training of promising students as network administrators as part of a high-school work-study program. Success hinged on combining work with education, providing supervision and mentoring, using knowledgeable trainers, not substituting students for staff shortcomings, and installing adequate computer security.…

75 FR 26206 - Implementing the National Broadband Plan by Studying the Communications Requirements of Electric...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-11

... information about electricity infrastructure's current and projected communications requirements, as well as...'s electricity infrastructure need to employ adequate communications technologies that serve their... Smart Grid and the other technologies that will evolve and change how electricity is produced, consumed...

Implementing a One-to-One Technology Initiative in Higher Education

ERIC Educational Resources Information Center

Fridley, Daryl; Rogers-Adkinson, Diana

2015-01-01

This paper describes the process of conceptualizing and implementing a one-to-one technology initiative at a regional comprehensive university. Organized around the principle that sustainable change requires attention to clear, justifiable goals, attention to key decisions, the development of stakeholder investment, adequate training, building…

Ethics for Industrial Technology

ERIC Educational Resources Information Center

Rosentrater, Kurt A.; Balamuralikrishna, Radha

2005-01-01

This paper takes aim at one specific, as well as basic, need in teamwork and interdisciplinary projects--ethics and its implications for professional practice. A preliminary study suggests that students majoring in industrial technology degree programs may not have adequate opportunity to formally study and engage in ethical aspects of technology…

40 CFR 725.428 - Requirements for the Tier II exemption.

Code of Federal Regulations, 2010 CFR

2010-07-01

... SUBSTANCES CONTROL ACT REPORTING REQUIREMENTS AND REVIEW PROCESSES FOR MICROORGANISMS General Exemptions for... material meets the criteria under § 725.421. (c) Adequate physical containment and control technologies are used. The criteria listed under § 725.422 for physical containment and control technologies of...

News Focus: Presidential Candidates Give Views on Science and Technology.

ERIC Educational Resources Information Center

Chemical and Engineering News, 1984

1984-01-01

Presents the views of Ronald Reagan and Walter Mondale on various science issues. Major areas examined include: science policy goals; science education; adequate research and development funding; importance of research activities; role of science and technology in solving national problems; and other issues. (JN)

Middle Start Technology Facts.

ERIC Educational Resources Information Center

Holland, Holly

Equity is an important part of technology education. Without adequate equipment and training, schools shortchange students and limit their ability to compete with their more fortunate peers. This is especially important at the middle school level because computer assisted instruction not only taps into adolescents' natural curiosity, but also can…

Understanding Health Literacy Measurement Through Eye Tracking

PubMed Central

Mackert, Michael; Champlin, Sara E.; Pasch, Keryn E.; Weiss, Barry D.

2013-01-01

This study used eye-tracking technology to explore how individuals with different levels of health literacy visualize health-related information. The authors recruited 25 university administrative staff (more likely to have adequate health literacy skills) and 25 adults enrolled in an adult literacy program (more likely to have limited health literacy skills). The authors administered the Newest Vital Sign (NVS) health literacy assessment to each participant. The assessment involves having individuals answer questions about a nutrition label while viewing the label. The authors used computerized eye-tracking technology to measure the amount of time each participant spent fixing their view at nutrition label information that was relevant to the questions being asked and the amount of time they spent viewing nonrelevant information. Results showed that lower NVS scores were significantly associated with more time spent on information not relevant for answering the NVS items. This finding suggests that efforts to improve health literacy measurement should include the ability to differentiate not just between individuals who have difficulty interpreting and using health information, but also between those who have difficulty finding relevant information. In addition, this finding suggests that health education material should minimize the inclusion of nonrelevant information. PMID:24093355

The Stratospheric Aerosol and Gas Experiment (SAGE) IV Pathfinder

NASA Astrophysics Data System (ADS)

Hill, C. A.; Damadeo, R. P.; Gasbarre, J. F.

2017-12-01

Stratospheric ozone has been the subject of observation and research for decades. Measurements from satellites provided data on the initial decline in the late 1970s and early 1980s that supported the adoption of the Montreal Protocol to current observations hinting at potential recovery. Adequate determination of that recovery requires continuous and, in the case of multiple instruments, overlapping data records. However, most current satellite systems are well beyond their expected lifetimes and thus, with only a few "younger" instruments available, we look towards the future of satellite observations of stratospheric ozone to develop the Stratospheric Aerosol and Gas Experiment (SAGE) IV Pathfinder. The SAGE IV Pathfinder project will develop and validate a technology demonstration that will pave the way for a future SAGE IV mission. Utilizing solar occultation imaging, SAGE IV will be capable of measuring ozone, aerosol, and other trace gas species with the same quality as previous SAGE instruments but with greatly improved pointing knowledge. Furthermore, current technological advancements allow SAGE IV to fit within a CubeSat framework and make use of commercial hardware, significantly reducing the size and cost when compared with traditional missions and enabling sustainability of future measurements.

Using Science Driven Technologies for the Defense and Security Applications

NASA Technical Reports Server (NTRS)

Habib, Shahid; Zukor, Dorthy; Ambrose, Stephen D.

2004-01-01

For the past three decades, Earth science remote sensing technologies have been providing enormous amounts of useful data and information in broadening our understanding of our home planet as a system. This research, as it has expanded our learning process, has also generated additional questions. This has further resulted in establishing new science requirements, which have culminated in defining and pushing the state-of-the-art technology needs. NASA s Earth science program has deployed 18 highly complex satellites, with a total of 80 sensors, so far and is in a process of defining and launching multiple observing systems in the next decade. Due to the heightened security alert of the nation, researchers and technologists are paying serious attention to the use of these science driven technologies for dual use. In other words, how such sophisticated observing and measuring systems can be used in detecting multiple types of security concerns with a substantial lead time so that the appropriate law enforcement agencies can take adequate steps to defuse any potential risky scenarios. This paper examines numerous NASA technologies such as laser/lidar systems, microwave and millimeter wave technologies, optical observing systems, high performance computational techniques for rapid analyses, and imaging products that can have a tremendous pay off for security applications.

Empirical evaluation of the Process Overview Measure for assessing situation awareness in process plants.

PubMed

Lau, Nathan; Jamieson, Greg A; Skraaning, Gyrd

2016-03-01

The Process Overview Measure is a query-based measure developed to assess operator situation awareness (SA) from monitoring process plants. A companion paper describes how the measure has been developed according to process plant properties and operator cognitive work. The Process Overview Measure demonstrated practicality, sensitivity, validity and reliability in two full-scope simulator experiments investigating dramatically different operational concepts. Practicality was assessed based on qualitative feedback of participants and researchers. The Process Overview Measure demonstrated sensitivity and validity by revealing significant effects of experimental manipulations that corroborated with other empirical results. The measure also demonstrated adequate inter-rater reliability and practicality for measuring SA in full-scope simulator settings based on data collected on process experts. Thus, full-scope simulator studies can employ the Process Overview Measure to reveal the impact of new control room technology and operational concepts on monitoring process plants. Practitioner Summary: The Process Overview Measure is a query-based measure that demonstrated practicality, sensitivity, validity and reliability for assessing operator situation awareness (SA) from monitoring process plants in representative settings.

Contemporary Aspects of Marketing in Clinical Trials Including Segments of IT and Technology Transfer.

PubMed

Stamenovic, Milorad; Dobraca, Amra; Smajlovic, Mersiha

2018-01-01

The aim of this paper is to present the marketing strategy and the application of management (marketing management) and advertising in order to increase the efficiency of innovative approach in clinical trials that include and involve the use of new technologies and transfer of technologies. This paper has a descriptive character and represents a narrative review of the literature and new model implementation. Marketing models are primarily used to improve the inclusion of a larger (and appropriate) number of patients, but they can be credited for the stay and monitoring of patients in the trial. Regulatory mechanisms play an important role in the application of various marketing strategies within clinical trials. The value for the patient as the most important stakeholder is defined in the field of clinical trials according to Kotler's value model for the consumer. In order to achieve the best results it is important to adequately examine all the elements of clinical trials and apply this knowledge in creation of a marketing plan that will be made in accordance with the legal regulations defined globally and locally. In this paper, two challenges have been highlighted for the adequate application of marketing tools in the field of clinical trials, namely: defining business elements in order to provide an adequate marketing approach for clinical trials and technology transfer and ensuring uniformity and regulatory affirmation of marketing attitudes in clinical trials in all regions in which they are carried out in accordance with ICH-GCP and valid regulations.

Shared Decisions & Technology-Assisted Learning

ERIC Educational Resources Information Center

Jacobs, Mary

2005-01-01

In this short article, the author discusses how Henderson Middle School in Jackson, Georgia used shared decision making to improve student achievement through the use of laptop computers. With effective use of technology and shared decision making, administrators at Henderson believe that they can continue to achieve Adequate Yearly Progress under…

Ethnography of Corporeality: A Carnal Move in Educational Technology Research

ERIC Educational Resources Information Center

Enriquez-Gibson, Judith

2016-01-01

Despite the increasing focus on non-dualistic and materialist approaches in education technology studies, the materiality of the body has not been adequately examined. Because of the heavy orientation towards affordance, interaction, participation, inclusion and access at the interface or between various spatial and liminal settings, the subject's…

"But Where Are the Cossacks?": An Alternative Strategy for Popularization.

ERIC Educational Resources Information Center

Fayard, Pierre

1991-01-01

Proposes methods for the optimal popularization of science and technology to shape and influence public opinion about the utility of associated policies and goals. Emphasizes that such popularization should concentrate on enabling laypeople to acquire an adequate level of scientific and technological literacy, applicable to their everyday lives.…

Project-X: An Initiative to Increase Student Engagement through Laptops

ERIC Educational Resources Information Center

Deveci, Tanju; Dalton, David; Hassan, Asli; Amer, Saed Taleb; Cubero, Samuel

2018-01-01

Today's digital natives enthuse educators to consider the impact of technology on learning and plan proper instruction, involving the use of laptop along with other technologies. However, implementing laptop use in classrooms without adequate support from administration, IT and faculty can have limited benefits. This article presents the results…

Teaching Accessibility and Design-for-All in the Information and Communication Technology Curriculum: Three Case Studies of Universities in the United States, England, and Austria

ERIC Educational Resources Information Center

Bohman, Paul R.

2012-01-01

Digital technologies allow people with disabilities to participate independently in society in ways they never could before. The full realization of these new opportunities remains elusive, though, because working professionals in the information and communication technology (ICT) field rarely receive adequate training in how to make digital ICT…

Impact of Virtual Learning Environment (VLE): A Technological Approach to Genetics Teaching on High School Students' Content Knowledge, Self-Efficacy and Career Goal Aspirations

ERIC Educational Resources Information Center

Kandi, Kamala M.

2013-01-01

This study examines the effect of a technology-based instructional tool "Geniverse" on the content knowledge gains, Science Self-Efficacy, Technology Self-Efficacy, and Career Goal Aspirations among 283 high school learners. The study was conducted in four urban high schools, two of which have achieved Adequate Yearly Progress (AYP) and…

Impact of virtual learning environment (VLE): A technological approach to genetics teaching on high school students' content knowledge, self-efficacy and career goal aspirations

NASA Astrophysics Data System (ADS)

Kandi, Kamala M.

This study examines the effect of a technology-based instructional tool 'Geniverse' on the content knowledge gains, Science Self-Efficacy, Technology Self-Efficacy, and Career Goal Aspirations among 283 high school learners. The study was conducted in four urban high schools, two of which have achieved Adequate Yearly Progress (AYP) and two have not. Students in both types of schools were taught genetics either through Geniverse, a virtual learning environment or Dragon genetics, a paper-pencil activity embedded in traditional instructional method. Results indicated that students in all schools increased their knowledge of genetics using either type of instructional approach. Students who were taught using Geniverse demonstrated an advantage for genetics knowledge although the effect was small. These increases were more pronounced in the schools that had been meeting the AYP goal. The other significant effect for Geniverse was that students in the technology-enhanced classrooms increased in science Self-Efficacy while students in the non-technology enhanced classrooms decreased. In addition, students from Non-AYP schools showed an improvement in Science and Technology Self-Efficacy; however the effects were small. The implications of these results for the future use of technology-enriched classrooms were discussed. Keywords: Technology-based instruction, Self-Efficacy, career goals and Adequate Yearly Progress (AYP).

The value of health information technology: filling the knowledge gap.

PubMed

Rudin, Robert S; Jones, Spencer S; Shekelle, Paul; Hillestad, Richard J; Keeler, Emmett B

2014-11-01

Despite rapid growth in the rate of adoption of health information technology (HIT), and in the volume of evaluation studies, the existing knowledge base for the value of HIT is not advancing at a similar rate. Most evaluation articles are limited in that they use incomplete measures of value and fail to report the important contextual and implementation characteristics that would allow for an adequate understanding of how the study results were achieved. To address these deficiencies, we present a conceptual framework for measuring HIT value and we propose a checklist of characteristics that should be considered in HIT evaluation studies. The framework consists of 3 key principles: 1) value includes both costs and benefits; 2) value accrues over time; and 3) value depends on which stakeholder's perspective is used. Through examples, we show how these principles can be used to guide and improve HIT evaluation studies. The checklist includes a list of contextual and implementation characteristics that are important for interpretation of results. These improvements will make future studies more useful for policy makers and more relevant to the current needs of the healthcare system.

Universal route to optimal few- to single-cycle pulse generation in hollow-core fiber compressors.

PubMed

Conejero Jarque, E; San Roman, J; Silva, F; Romero, R; Holgado, W; Gonzalez-Galicia, M A; Alonso, B; Sola, I J; Crespo, H

2018-02-02

Gas-filled hollow-core fiber (HCF) pulse post-compressors generating few- to single-cycle pulses are a key enabling tool for attosecond science and ultrafast spectroscopy. Achieving optimum performance in this regime can be extremely challenging due to the ultra-broad bandwidth of the pulses and the need of an adequate temporal diagnostic. These difficulties have hindered the full exploitation of HCF post-compressors, namely the generation of stable and high-quality near-Fourier-transform-limited pulses. Here we show that, independently of conditions such as the type of gas or the laser system used, there is a universal route to obtain the shortest stable output pulse down to the single-cycle regime. Numerical simulations and experimental measurements performed with the dispersion-scan technique reveal that, in quite general conditions, post-compressed pulses exhibit a residual third-order dispersion intrinsic to optimum nonlinear propagation within the fiber, in agreement with measurements independently performed in several laboratories around the world. The understanding of this effect and its adequate correction, e.g. using simple transparent optical media, enables achieving high-quality post-compressed pulses with only minor changes in existing setups. These optimized sources have impact in many fields of science and technology and should enable new and exciting applications in the few- to single-cycle pulse regime.

Ethical considerations in the conduct of electronic surveillance research.

PubMed

Bharucha, Ashok J; London, Alex John; Barnard, David; Wactlar, Howard; Dew, Mary Amanda; Reynolds, Charles F

2006-01-01

The extant clinical literature indicates profound problems in the assessment, monitoring, and documentation of care in long-term care facilities. The lack of adequate resources to accommodate higher staff-to-resident ratios adds additional urgency to the goal of identifying more cost-effective mechanisms to provide care oversight. The ever expanding array of electronic monitoring technologies in the clinical research arena demands a conceptual and pragmatic framework for the resolution of ethical tensions inherent in the use of such innovative tools. CareMedia is a project that explores the utility of video, audio and sensor technologies as a continuous real-time assessment and outcomes measurement tool. In this paper, the authors describe the seminal ethical challenges encountered during the implementation phase of this project, namely privacy and confidentiality protection, and the strategies employed to resolve the ethical tensions by applying principles of the interest theory of rights.

Fourth international cryogenic materials conference

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reed, R.P.; Clark, A.F.

1982-01-01

In a comprehensive and current collection of 911 papers on a vest range of materials research topics in the field of cryogenic technology, this 924-page volume presents the most recent work of an international spectrum of materials and cyrogenic engineers at industrial and academic laboratories and institutions. The papers are collected under the broad headings of structural alloys; nometallics and composites; flux pinning in superconductors; high field superconductors; A15 superconductors; multiply-connected superconductors; superconductor properties and measurements; strain effects in superconductors; superconductor performance; the fabrication of superconductors; and the fabrication of structural alloys and composits. Ample and adequate photographic, plot, schematic,more » and tabulation illustration are included; the volume is also cross-referenced and has an author, materials, and subject index. It is volume 28 in a series which annually updates the existing knowledge of all areas of low-temperature technology.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

G. CANAVAN

Space Based Interceptor (SBI) have ranges that are adequate to address rogue ICBMs. They are not overly sensitive to 30-60 s delay times. Current technologies would support boost phase intercept with about 150 interceptors. Higher acceleration and velocity could reduce than number by about a factor of 3 at the cost of heavier and more expensive Kinetic Kill Vehicles (KKVs). 6g SBI would reduce optimal constellation costs by about 35%; 8g SBI would reduce them another 20%. Interceptor ranges fall rapidly with theater missile range. Constellations increase significantly for ranges under 3,000 km, even with advanced interceptor technology. For distributedmore » launches, these estimates recover earlier strategic scalings, which demonstrate the improved absentee ratio for larger or multiple launch areas. Constellations increase with the number of missiles and the number of interceptors launched at each. The economic estimates above suggest that two SBI per missile with a modest midcourse underlay is appropriate. The SBI KKV technology would appear to be common for space- and surface-based boost phase systems, and could have synergisms with improved midcourse intercept and discrimination systems. While advanced technology could be helpful in reducing costs, particularly for short range theater missiles, current technology appears adequate for pressing rogue ICBM, accidental, and unauthorized launches.« less

Hydrogen-oxygen auxiliary propulsion for the space shuttle. Volume 2: Low pressure thrusters

NASA Technical Reports Server (NTRS)

1973-01-01

An abbreviated program was conducted to investigate igniter, injector, and thrust chamber technology for a 10.3 N/cm2 (15 psia) chamber pressure, 6660 N (1500 lbf) gaseous H2/O2 APS thruster for the Space Shuttle Vehicle. Successful catalytic igniter tests were conducted with ambient and cold propellants. Injector testing with a heat sink chamber (MR = 2.5, area ratio = 5.0) gave a measured specific impulse of 386 sec with 11% of the fuel used as film coolant. This coolant flow rate was demonstrated to be more than adequate to cool a spun adiabatic wall, flightweight thrust chamber.

TPS Ablator Technologies for Interplanetary Spacecraft

NASA Technical Reports Server (NTRS)

Curry, Donald M.

2004-01-01

This slide presentation reviews the status of Thermal Protection System (TPS) Ablator technologies and the preparation for use in interplanetary spacecraft. NASA does not have adequate TPS ablatives and sufficient selection for planned missions. It includes a comparison of shuttle and interplanetary TPS requirements, the status of mainline TPS charring ablator materials, a summary of JSC SBIR accomplishments in developing advanced charring ablators and the benefits of SBIR Ablator/fabrication technology.

Realizing Network-Centric Warfare: The Cultural, Organizational, and Human Barriers

DTIC Science & Technology

2008-01-01

with the fielding of advanced information technology . Discussion: The Department ofDefense (DOD) transformation to NCW has lacked adequate focus on many...range of military operations. In order to successfully employ advanced technologies in "crisis response and limited contingency operations" and "major...its adversaries. Changes in military technology , concepts, and organization have usually come in conjunction with changes to our nation’s social

You Can Teach an Old Dog New Tricks: The Faculty's Role in Technology Implementation.

ERIC Educational Resources Information Center

White, Jill T.; Myers, Susan D.

2001-01-01

Reports student and faculty perceptions of two courses that included online instruction via WebCT. Discusses how initial student concerns changed to perceptions of how the technology was beneficial and increased community and collaboration among learners. Notes the importance of adequate planning time for faculty. (SR)

Assets, Challenges, and the Potential of Technology for Nutrition Education in Rural Communities

ERIC Educational Resources Information Center

Atkinson, Nancy L.; Desmond, Sharon M.; Saperstein, Sandra L.; Billing, Amy S.; Gold, Robert S.; Tournas-Hardt, Amy

2010-01-01

Objective: To examine assets of and challenges to getting adequate nutrition and physical activity among low-income rural residents, and the potential for technology to provide health education. Methods: Environmental scans and community stakeholder interviews were conducted in 5 rural counties in Maryland. During environmental scans, stakeholders…

Pedagogical Shift in the Twenty-First Century: Preparing Teachers to Teach with New Technologies

ERIC Educational Resources Information Center

Chigona, Agnes

2015-01-01

The expectation in education today is that pre-service teachers should graduate from teacher education adequately prepared to teach with Information Communication Technologies (ICTs) that have potential to enhance curriculum delivery, hence improving quality of education. However, research shows that pre-service teachers are graduating from…

Are Schools Getting a Big Enough Bang for Their Education Technology Buck?

ERIC Educational Resources Information Center

Boser, Ulrich

2013-01-01

Far too often, school leaders fail to consider how technology might dramatically improve teaching and learning, and schools frequently acquire digital devices without discrete learning goals and ultimately use these devices in ways that fail to adequately serve students, schools, or taxpayers. Because of a growing debate concerning spending on…

Creating Technology Infrastructures in a Rural School District: A Partnership Approach.

ERIC Educational Resources Information Center

Jensen, Dennis

Rural schools face significant challenges in upgrading their technology infrastructures. Rural school districts tend to have older school buildings that have multiple problems and lack climate control, adequate space, and necessary wiring. In rural districts, it may be difficult to find the leadership and expertise needed to provide professional…

Collaborative Information Technology Center (CITC) for Rural Areas.

ERIC Educational Resources Information Center

Fontenot, Dean; Driskill, David A.

The digital divide remains a formidable issue in rural areas where the only broadband access to the Internet may be at public schools or city governments. As the only locations in rural areas with adequate technological resources, schools, libraries, health facilities, and agricultural extension facilities can be places where citizens learn about…

Approaches for Evaluating the Usability of Assistive Technology Product Prototypes

ERIC Educational Resources Information Center

Choi, Young Mi; Sprigle, Stephen H.

2011-01-01

User input is an important component to help guide designers in producing a more usable product. Evaluation of prototypes is one method of obtaining this input, but methods for evaluating assistive technology prototypes during design have not been adequately described or evaluated. This project aimed to compare different methods of evaluating…

A Systematic Literature Review of Three Modalities in Technologically Assisted TKA

PubMed Central

Leone, William A.; Elson, Leah C.; Anderson, Christopher R.

2015-01-01

In effort to reduce the revision burden of total knee arthroplasty (TKA), industry emphasis has focused on replacing manual techniques—which are subject to variability—with technological implements. Unfortunately, technological innovation often continues before adequate time for critical evaluation has passed. Therefore, the purpose of this descriptive literature review was to collect a large sample of international data and report on the clinical and economic efficacy of three major types of technologically assisted TKA: navigation, patient-specific instrumentation, and sensorized trials. PMID:26664755

Relevance of Clean Coal Technology for India’s Energy Security: A Policy Perspective

NASA Astrophysics Data System (ADS)

Garg, Amit; Tiwari, Vineet; Vishwanathan, Saritha

2017-07-01

Climate change mitigation regimes are expected to impose constraints on the future use of fossil fuels in order to reduce greenhouse gas (GHG) emissions. In 2015, 41% of total final energy consumption and 64% of power generation in India came from coal. Although almost a sixth of the total coal based thermal power generation is now super critical pulverized coal technology, the average CO2 emissions from the Indian power sector are 0.82 kg-CO2/kWh, mainly driven by coal. India has large domestic coal reserves which give it adequate energy security. There is a need to find options that allow the continued use of coal while considering the need for GHG mitigation. This paper explores options of linking GHG emission mitigation and energy security from 2000 to 2050 using the AIM/Enduse model under Business-as-Usual scenario. Our simulation analysis suggests that advanced clean coal technologies options could provide promising solutions for reducing CO2 emissions by improving energy efficiencies. This paper concludes that integrating climate change security and energy security for India is possible with a large scale deployment of advanced coal combustion technologies in Indian energy systems along with other measures.

Awake craniotomy: A qualitative review and future challenges

PubMed Central

Ghazanwy, Mahmood; Chakrabarti, Rajkalyan; Tewari, Anurag; Sinha, Ashish

2014-01-01

Neurosurgery in awake patients incorporates newer technologies that require the anesthesiologists to update their skills and evolve their methodologies. They need effective communication skills and knowledge of selecting the right anesthetic drugs to ensure adequate analgesia, akinesia, along with patient satisfaction with the anesthetic conduct throughout the procedure. The challenge of providing adequate anesthetic care to an awake patient for intracranial surgery requires more than routine vigilance about anesthetic management. PMID:25422613

Ion channel drug discovery and research: the automated Nano-Patch-Clamp technology.

PubMed

Brueggemann, A; George, M; Klau, M; Beckler, M; Steindl, J; Behrends, J C; Fertig, N

2004-01-01

Unlike the genomics revolution, which was largely enabled by a single technological advance (high throughput sequencing), rapid advancement in proteomics will require a broader effort to increase the throughput of a number of key tools for functional analysis of different types of proteins. In the case of ion channels -a class of (membrane) proteins of great physiological importance and potential as drug targets- the lack of adequate assay technologies is felt particularly strongly. The available, indirect, high throughput screening methods for ion channels clearly generate insufficient information. The best technology to study ion channel function and screen for compound interaction is the patch clamp technique, but patch clamping suffers from low throughput, which is not acceptable for drug screening. A first step towards a solution is presented here. The nano patch clamp technology, which is based on a planar, microstructured glass chip, enables automatic whole cell patch clamp measurements. The Port-a-Patch is an automated electrophysiology workstation, which uses planar patch clamp chips. This approach enables high quality and high content ion channel and compound evaluation on a one-cell-at-a-time basis. The presented automation of the patch process and its scalability to an array format are the prerequisites for any higher throughput electrophysiology instruments.

Contemporary Aspects of Marketing in Clinical Trials Including Segments of IT and Technology Transfer

PubMed Central

Stamenovic, Milorad; Dobraca, Amra; Smajlovic, Mersiha

2018-01-01

Introduction: The aim of this paper is to present the marketing strategy and the application of management (marketing management) and advertising in order to increase the efficiency of innovative approach in clinical trials that include and involve the use of new technologies and transfer of technologies. Material and Methods: This paper has a descriptive character and represents a narrative review of the literature and new model implementation. Results: Marketing models are primarily used to improve the inclusion of a larger (and appropriate) number of patients, but they can be credited for the stay and monitoring of patients in the trial. Regulatory mechanisms play an important role in the application of various marketing strategies within clinical trials. The value for the patient as the most important stakeholder is defined in the field of clinical trials according to Kotler’s value model for the consumer. Conclusion: In order to achieve the best results it is important to adequately examine all the elements of clinical trials and apply this knowledge in creation of a marketing plan that will be made in accordance with the legal regulations defined globally and locally. In this paper, two challenges have been highlighted for the adequate application of marketing tools in the field of clinical trials, namely: defining business elements in order to provide an adequate marketing approach for clinical trials and technology transfer and ensuring uniformity and regulatory affirmation of marketing attitudes in clinical trials in all regions in which they are carried out in accordance with ICH-GCP and valid regulations. PMID:29719318

Maintaining Adequate CO2 Washout for an Advanced EMU via a New Rapid Cycle Amine Technology

NASA Technical Reports Server (NTRS)

Chullen, Cinda; Conger, Bruce

2012-01-01

Over the past several years, NASA has realized tremendous progress in Extravehicular Activity (EVA) technology development. This has been evidenced by the progressive development of a new Rapid Cycle Amine (RCA) system for the Advanced Extravehicular Mobility Unit (AEMU) Portable Life Support Subsystem (PLSS). The PLSS is responsible for the life support of the crew member in the spacesuit. The RCA technology is responsible for carbon dioxide (CO2) and humidity control. Another aspect of the RCA is that it is on-back vacuum-regenerable, efficient, and reliable. The RCA also simplifies the PLSS schematic by eliminating the need for a condensing heat exchanger for humidity control in the current EMU. As development progresses on the RCA, it is important that the sizing be optimized so that the demand on the PLSS battery is minimized. As well, maintaining the CO2 washout at adequate levels during an EVA is an absolute requirement of the RCA and associated ventilation system. Testing has been underway in-house at NASA Johnson Space Center and analysis has been initiated to evaluate whether the technology provides exemplary performance in ensuring that the CO2 is removed sufficiently and the ventilation flow is adequate for maintaining CO2 washout in the AEMU spacesuit helmet of the crew member during an EVA. This paper will review the recent developments of the RCA unit, testing planned in-house with a spacesuit simulator, and the associated analytical work along with insights from the medical aspect on the testing. 1

Predicting clinical outcomes in chordoma patients receiving immunotherapy: a comparison between volumetric segmentation and RECIST.

PubMed

Fenerty, Kathleen E; Folio, Les R; Patronas, Nicholas J; Marté, Jennifer L; Gulley, James L; Heery, Christopher R

2016-08-23

The Response Evaluation Criteria in Solid Tumors (RECIST) are the current standard for evaluating disease progression or therapy response in patients with solid tumors. RECIST 1.1 calls for axial, longest-diameter (or perpendicular short axis of lymph nodes) measurements of a maximum of five tumors, which limits clinicians' ability to adequately measure disease burden, especially in patients with irregularly shaped tumors. This is especially problematic in chordoma, a disease for which RECIST does not always adequately capture disease burden because chordoma tumors are typically irregularly shaped and slow-growing. Furthermore, primary chordoma tumors tend to be adjacent to vital structures in the skull or sacrum that, when compressed, lead to significant clinical consequences. Volumetric segmentation is a newer technology that allows tumor burden to be measured in three dimensions on either MR or CT. Here, we compared the ability of RECIST measurements and tumor volumes to predict clinical outcomes in a cohort of 21 chordoma patients receiving immunotherapy. There was a significant difference in radiologic time to progression Kaplan-Meier curves between clinical outcome groups using volumetric segmentation (P = 0.012) but not RECIST (P = 0.38). In several cases, changes in volume were earlier and more sensitive reflections of clinical status. RECIST is a useful evaluation method when obvious changes are occurring in patients with chordoma. However, in many cases, RECIST does not detect small changes, and volumetric assessment was capable of detecting changes and predicting clinical outcome earlier than RECIST. Although this study was small and retrospective, we believe our results warrant further research in this area.

New calorimeters for space experiments: physics requirements and technological challenges

NASA Astrophysics Data System (ADS)

Marrocchesi, Pier Simone

2015-07-01

Direct measurements of charged cosmic radiation with instruments in Low Earth Orbit (LEO), or flying on balloons above the atmosphere, require the identification of the incident particle, the measurement of its energy and possibly the determination of its sign-of-charge. The latter information can be provided by a magnetic spectrometer together with a measurement of momentum. However, magnetic deflection in space experiments is at present limited to values of the Maximum Detectable Rigidity (MDR) hardly exceeding a few TV. Advanced calorimetric techniques are, at present, the only way to measure charged and neutral radiation at higher energies in the multi-TeV range. Despite their mass limitation, calorimeters may achieve a large geometric factor and provide an adequate proton background rejection factor, taking advantage of a fine granularity and imaging capabilities. In this lecture, after a brief introduction on electromagnetic and hadronic calorimetry, an innovative approach to the design of a space-borne, large acceptance, homogeneous calorimeter for the detection of high energy cosmic rays will be described.

Mountain Hydrology of the Semi-Arid Western U.S.: Research Needs, Opportunities and Challenges

NASA Astrophysics Data System (ADS)

Bales, R.; Dozier, J.; Molotch, N.; Painter, T.; Rice, R.

2004-12-01

In the semi-arid Western U.S., water resources are being stressed by the combination of climate warming, changing land use, and population growth. Multiple consensus planning documents point to this region as perhaps the highest priority for new hydrologic understanding. Three main hydrologic issues illustrate research needs in the snow-driven hydrology of the region. First, despite the hydrologic importance of mountainous regions, the processes controlling their energy, water and biogeochemical fluxes are not well understood. Second, there exists a need to realize, at various spatial and temporal scales, the feedback systems between hydrological fluxes and biogeochemical and ecological processes. Third, the paucity of adequate observation networks in mountainous regions hampers improvements in understanding these processes. For example, we lack an adequate description of factors controlling the partitioning of snowmelt into runoff versus infiltration and evapotranspiration, and need strategies to accurately measure the variability of precipitation, snow cover and soil moisture. The amount of mountain-block and mountain-front recharge and how recharge patterns respond to climate variability are poorly known across the mountainous West. Moreover, hydrologic modelers and those measuring important hydrologic variables from remote sensing and distributed in situ sites have failed to bridge rifts between modeling needs and available measurements. Research and operational communities will benefit from data fusion/integration, improved measurement arrays, and rapid data access. For example, the hydrologic modeling community would advance if given new access to single rather than disparate sources of bundles of cutting-edge remote sensing retrievals of snow covered area and albedo, in situ measurements of snow water equivalent and precipitation, and spatio-temporal fields of variables that drive models. In addition, opportunities exist for the deployment of new technologies, taking advantage of research in spatially distributed sensor networks that can enhance data recovery and analysis.

From the Islands of Knowledge to a Shared Understanding: Interdisciplinarity and Technology Literacy for Innovation in Smart Electronic Product Design

ERIC Educational Resources Information Center

Blanco, Teresa; Casas, Roberto; Manchado-Pérez, Eduardo; Asensio, Ángel; López-Pérez, Jose M.

2017-01-01

In the context of the evolving Internet, a balance between technological advances and meaning change is crucial to develop innovative and breakthrough "connected electronics" that enable the Internet of Things. Designers and technologists are key enablers of this process respectively, ensuring adequate users' needs and technology…

Industrial Technology Education Teachers' Knowledge, Experience, and Feelings Related To Working with Special Population Students in the Lincoln, Nebraska Public Schools.

ERIC Educational Resources Information Center

Howell, Robert T.

2000-01-01

Survey responses from 20 of 39 industrial technology education teachers in Lincoln, Nebraska, indicated that they felt able to teach special needs students but desired more training. They did not receive adequate support for working with these students and preferred professional days for inservice training. (SK)

The Clock Project: Gears as Visual-Tangible Representations for Mathematical Concepts

ERIC Educational Resources Information Center

Andrade, Alejandro

2011-01-01

As we have noticed from our own classroom experiences, children often find it difficult to identify the adequate operations learned in mathematics class when they are solving mechanical-operators problems in Technology class. We wanted to design a project that exploits the idea of a hands-on relationship between mathematics and technology to teach…

Wireless Internet Gateways (WINGS)

DTIC Science & Technology

1997-01-01

WIRELESS INTERNET GATEWAYS (WINGS) J.J. Garcia-Luna-Aceves, Chane L. Fullmer, Ewerton Madruga Computer Engineering Department University of...rooftop.com Abstract— Today’s internetwork technology has been extremely success- ful in linking huge numbers of computers and users. However, to date...this technology has been oriented to computer interconnection in relatively stable operational environments, and thus cannot adequately support many of

ICT-Supported Learning for Inclusion of People with Special Needs: Review of Seven Educational Technology Journals, 1970-2011

ERIC Educational Resources Information Center

Istenic Starcic, Andreja; Bagon, Spela

2014-01-01

Research and development of information and communication technology (ICT)-supported learning for people with disabilities has not received adequate attention. It is also difficult to access research findings and developments in this field. Under the ENABLE Network of ICT Supported Learning for Disabled People (2011-2014) project, an emerging…

A Framework for Integrating Knowledge Management with Risk Management for Information Technology Projects (RiskManiT)

ERIC Educational Resources Information Center

Karadsheh, Louay A.

2010-01-01

This research focused on the challenges experienced when executing risk management activities for information technology projects. The lack of adequate knowledge management support of risk management activities has caused many project failures in the past. The research objective was to propose a conceptual framework of the Knowledge-Based Risk…

Economic impact of stimulated technological activity. Part 3: Case study, knowledge additions and earth links from space crew systems

NASA Technical Reports Server (NTRS)

1971-01-01

A case study of knowledge contributions from the crew life support aspect of the manned space program is reported. The new information needed to be learned, the solutions developed, and the relation of new knowledge gained to earthly problems were investigated. Illustrations are given in the following categories: supplying atmosphere for spacecraft; providing carbon dioxide removal and recycling; providing contaminant control and removal; maintaining the body's thermal balance; protecting against the space hazards of decompression, radiation, and meteorites; minimizing fire and blast hazards; providing adequate light and conditions for adequate visual performance; providing mobility and work physiology; and providing adequate habitability.

Beyond the plot: technology extrapolation domains for scaling out agronomic science

NASA Astrophysics Data System (ADS)

Rattalino Edreira, Juan I.; Cassman, Kenneth G.; Hochman, Zvi; van Ittersum, Martin K.; van Bussel, Lenny; Claessens, Lieven; Grassini, Patricio

2018-05-01

Ensuring an adequate food supply in systems that protect environmental quality and conserve natural resources requires productive and resource-efficient cropping systems on existing farmland. Meeting this challenge will be difficult without a robust spatial framework that facilitates rapid evaluation and scaling-out of currently available and emerging technologies. Here we develop a global spatial framework to delineate ‘technology extrapolation domains’ based on key climate and soil factors that govern crop yields and yield stability in rainfed crop production. The proposed framework adequately represents the spatial pattern of crop yields and stability when evaluated over the data-rich US Corn Belt. It also facilitates evaluation of cropping system performance across continents, which can improve efficiency of agricultural research that seeks to intensify production on existing farmland. Populating this biophysical spatial framework with appropriate socio-economic attributes provides the potential to amplify the return on investments in agricultural research and development by improving the effectiveness of research prioritization and impact assessment.

Feasibility of absolute cerebral tissue oxygen saturation during cardiopulmonary resuscitation.

PubMed

Meex, Ingrid; De Deyne, Cathy; Dens, Jo; Scheyltjens, Simon; Lathouwers, Kevin; Boer, Willem; Vundelinckx, Guy; Heylen, René; Jans, Frank

2013-03-01

Current monitoring during cardiopulmonary resuscitation (CPR) is limited to clinical observation of consciousness, breathing pattern and presence of a pulse. At the same time, the adequacy of cerebral oxygenation during CPR is critical for neurological outcome and thus survival. Cerebral oximetry, based on near-infrared spectroscopy (NIRS), provides a measure of brain oxygen saturation. Therefore, we examined the feasibility of using NIRS during CPR. Recent technologies (FORE-SIGHT™ and EQUANOX™) enable the monitoring of absolute cerebral tissue oxygen saturation (SctO2) values without the need for pre-calibration. We tested both FORE-SIGHT™ (five patients) and EQUANOX Advance™ (nine patients) technologies in the in-hospital as well as the out-of-hospital CPR setting. In this observational study, values were not utilized in any treatment protocol or therapeutic decision. An independent t-test was used for statistical analysis. Our data demonstrate the feasibility of both technologies to measure cerebral oxygen saturation during CPR. With the continuous, pulseless near-infrared wave analysis of both FORE-SIGHT™ and EQUANOX™ technology, we obtained SctO2 values in the absence of spontaneous circulation. Both technologies were able to assess the efficacy of CPR efforts: improved resuscitation efforts (improved quality of chest compressions with switch of caregivers) resulted in higher SctO2 values. Until now, the ability of CPR to provide adequate tissue oxygenation was difficult to quantify or to assess clinically due to a lack of specific technology. With both technologies, any change in hemodynamics (for example, ventricular fibrillation) results in a reciprocal change in SctO2. In some patients, a sudden drop in SctO2 was the first warning sign of reoccurring ventricular fibrillation. Both the FORE-SIGHT™ and EQUANOX™ technology allow non-invasive monitoring of the cerebral oxygen saturation during CPR. Moreover, changes in SctO2 values might be used to monitor the efficacy of CPR efforts.

Integration of optical measurement methods with flight parameter measurement systems

NASA Astrophysics Data System (ADS)

Kopecki, Grzegorz; Rzucidlo, Pawel

2016-05-01

During the AIM (advanced in-flight measurement techniques) and AIM2 projects, innovative modern techniques were developed. The purpose of the AIM project was to develop optical measurement techniques dedicated for flight tests. Such methods give information about aircraft elements deformation, thermal loads or pressure distribution, etc. In AIM2 the development of optical methods for flight testing was continued. In particular, this project aimed at the development of methods that could be easily applied in flight tests in an industrial setting. Another equally important task was to guarantee the synchronization of the classical measuring system with cameras. The PW-6U glider used in flight tests was provided by the Rzeszów University of Technology. The glider had all the equipment necessary for testing the IPCT (image pattern correlation technique) and IRT (infrared thermometry) methods. Additionally, equipment adequate for the measurement of typical flight parameters, registration and analysis has been developed. This article describes the designed system, as well as presenting the system’s application during flight tests. Additionally, the results obtained in flight tests show certain limitations of the IRT method as applied.

A study of the historical role of African Americans in science, engineering and technology

NASA Astrophysics Data System (ADS)

Jones, Keith Wayne

2000-11-01

The purpose of this study was to determine if there is adequate documentation of an historical role of African and African American involvement in science, engineering, and technology. Through the use of history of science and technology research methodology, along with an examination of the sociological and economic impacts of adequately accredited innovations and inventions contributed by Africans and African Americans, the researcher investigated their contributions to the following areas of science and technology: life science, physical sciences and chemistry, engineering, and science education. In regard to the timeframe for this study, the researcher specifically investigated African and African American involvement in science and technology that includes periods prior to black enslavement, scientific racism and colonialism, as well as during and after those periods. This research study reveals that there are adequate historical data regarding African and African American contributions to science, engineering, and technology. The data reveals that for many millennia African peoples have been continually involved in science and world science histories. The data further show that the numbers of African Americans acquiring BS, MS, Ph.D., Doctor of Science and Doctor of Engineering degrees in science and engineering disciplines are increasing. That these increases are not happening at a rate representative of the present or future African American percentages of the population. Consequently, because of future changes in our nation's demographics, increasing the numbers of people from under-represented groups who pursue scientific and engineering professions has become a matter of national security at the highest levels of government. Moreover, African Americans, Hispanics, and Native Americans are not pursuing careers or taking courses in science and engineering at a rate high enough to fulfill the prospective needs for the United States' industries, government, and military. Projections are that, in the 21st century, there will be even greater needs for more scientists, engineers, information technologists, and other types of scientific workers. The data from this study indicate that more inclusive history of science and technology can be used as a means for encouraging more people from under-represented groups to become scientifically literate and to pursue science and engineering careers.

Development and evaluation of the INSPIRE measure of staff support for personal recovery.

PubMed

Williams, Julie; Leamy, Mary; Bird, Victoria; Le Boutillier, Clair; Norton, Sam; Pesola, Francesca; Slade, Mike

2015-05-01

No individualised standardised measure of staff support for mental health recovery exists. To develop and evaluate a measure of staff support for recovery. initial draft of measure based on systematic review of recovery processes; consultation (n = 61); and piloting (n = 20). Psychometric evaluation: three rounds of data collection from mental health service users (n = 92). INSPIRE has two sub-scales. The 20-item Support sub-scale has convergent validity (0.60) and adequate sensitivity to change. Exploratory factor analysis (variance 71.4-85.1 %, Kaiser-Meyer-Olkin 0.65-0.78) and internal consistency (range 0.82-0.85) indicate each recovery domain is adequately assessed. The 7-item Relationship sub-scale has convergent validity 0.69, test-retest reliability 0.75, internal consistency 0.89, a one-factor solution (variance 70.5 %, KMO 0.84) and adequate sensitivity to change. A 5-item Brief INSPIRE was also evaluated. INSPIRE and Brief INSPIRE demonstrate adequate psychometric properties, and can be recommended for research and clinical use.

Mars Science Laboratory Focused Technology Program Overview

NASA Technical Reports Server (NTRS)

Udomkesmalee, Gabriel Souraphol; Hayati, Samad A.

2005-01-01

This paper describes how the MSL-FT program functions to ensure that the needed technology is identified, developed, matured to TRL 6, and infused in the MSL mission, in a systematic fashion that will meet the mission's objectives innovatively and within budget. The paper describes the mission's technical and project challenges, and outlines the process, procedures, tools and people involved in meeting those challenges. The paper also discusses the technology certification process required to demonstrate that technology deliverables perform adequately and in a predictable fashion to successful infusion into the MSL Flight System.

Transforming Nursing Education With Apple Technology.

PubMed

Clark, Angela; Glazer, Greer; Edwards, Christopher; Pryse, Yvette

The widespread adoption of technology has the potential to redefine nursing education. Currently, there is limited knowledge of how to implement technological advancements in nursing curricula. This article describes 1 college's journey to transform nursing education through leadership, professional development, and innovative learning and teaching. The iPad opens the classroom experience to resources and learning opportunities for students. Facilitating the culture change required to adopt the iPad as a teaching and learning tool required a supportive vision, strong leadership, commitment to provide adequate technological support, early adopters, and planning.

Human Subjects Protection and Technology in Prevention Science: Selected Opportunities and Challenges.

PubMed

Pisani, Anthony R; Wyman, Peter A; Mohr, David C; Perrino, Tatiana; Gallo, Carlos; Villamar, Juan; Kendziora, Kimberly; Howe, George W; Sloboda, Zili; Brown, C Hendricks

2016-08-01

Internet-connected devices are changing the way people live, work, and relate to one another. For prevention scientists, technological advances create opportunities to promote the welfare of human subjects and society. The challenge is to obtain the benefits while minimizing risks. In this article, we use the guiding principles for ethical human subjects research and proposed changes to the Common Rule regulations, as a basis for discussing selected opportunities and challenges that new technologies present for prevention science. The benefits of conducting research with new populations, and at new levels of integration into participants' daily lives, are presented along with five challenges along with technological and other solutions to strengthen the protections that we provide: (1) achieving adequate informed consent with procedures that are acceptable to participants in a digital age; (2) balancing opportunities for rapid development and broad reach, with gaining adequate understanding of population needs; (3) integrating data collection and intervention into participants' lives while minimizing intrusiveness and fatigue; (4) setting appropriate expectations for responding to safety and suicide concerns; and (5) safeguarding newly available streams of sensitive data. Our goal is to promote collaboration between prevention scientists, institutional review boards, and community members to safely and ethically harness advancing technologies to strengthen impact of prevention science.

Diffusion and utilization of scientific and technological knowledge within state and local governments

NASA Technical Reports Server (NTRS)

Feller, I.; Flanary, P. E.

1979-01-01

The state-of-the-art is reviewed concerning current knowledge of processes by which technological innovation and scientific information are disseminated among state and local governments. The effectiveness of various mechanisms, strategies, and approaches by which federal agencies have sought to transfer technology to state, regional, and city governments are assessed. It is concluded that the existing relationships between the state and local governments, and the scientific communities are not adequate.

Mobile technology-based interventions for adult users of alcohol: A systematic review of the literature.

PubMed

Fowler, Lauren A; Holt, Sidney L; Joshi, Deepti

2016-11-01

Worldwide, 16% of people aged 15 and older engage in harmful use of alcohol. Harmful alcohol use leads to a host of preventable negative social and health consequences. Mobile technology-based interventions provide a particularly promising avenue for the widespread and cost-effective delivery of treatment that is accessible, affordable, individualized, and destigmatized to both alcohol-dependent and nondependent individuals. The present review sought to summarize the current literature on mobile technology-based interventions among adult users of alcohol and determine the efficacy of such interventions. Five databases were searched in December 2015 (Jan. 2004-Dec. 2015). Inclusion criteria were: participants aged 18 or older, interventions delivered through mobile-technology, and outcome measurement of alcohol reduction/cessation. Eight studies met inclusion criteria. The majority of the studies reviewed found positive effects of the intervention, even though the interventions themselves varied in design, length, dosage, and target population, and were pilot or preliminary in nature. Findings from this review highlight the promising, yet preliminary state of research in this area. Studies with adequate power and valid design are necessary to evaluate the potential of mobile technology-based interventions on long-term alcohol behavior outcomes. Furthermore, future research should elucidate what the most effective length of time is for a mobile technology-based intervention, how often individuals should receive messages for maximum benefit, and determine the comparative effectiveness of mobile technology interventions with other efficacious interventions. Copyright © 2016 Elsevier Ltd. All rights reserved.

Evidence-Based Assessment of Depression in Adults

ERIC Educational Resources Information Center

Joiner, Thomas E.; Walker, Rheeda L.; Pettit, Jeremy W.; Perez, Marisol; Cukrowicz, Kelly C.

2005-01-01

From diverse perspectives, there is little doubt that depressive symptoms cohere to form a valid and distinct syndrome. Research indicates that an evidence-based assessment of depression would include (a) measures with adequate psychometric properties; (b) adequate coverage of symptoms; (c) adequate coverage of depressed mood, anhedonia, and…

78 FR 14071 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-04

... through the use of appropriate automated, electronic, mechanical, or other technological collection... conditions and adequate farm building and other structures in rural areas. Need and Use of the Information...

Mid-infrared coincidence measurements based on intracavity frequency conversion

NASA Astrophysics Data System (ADS)

Piccione, S.; Mancinelli, M.; Trenti, A.; Fontana, G.; Dam, J.; Tidemand-Lichtenberg, P.; Pedersen, C.; Pavesi, L.

2018-02-01

In the last years, the Mid Infrared (MIR) spectral region has attracted the attention of many areas of science and technology, opening the way to important applications, such as molecular imaging, remote sensing, free- space communication and environmental monitoring. However, the development of new sources of light, such as quantum cascade laser, was not followed by an adequate improvement in the MIR detection system, able to exceed the current challenges. Here we demonstrate the single-photon counting capability of a new detection system, based on efficient up-converter modules, by proving the correlated nature of twin photons pairs at about 3.1μm, opening the way to the extension of quantum optics experiments in the MIR.

A Pilot Study of the Use of Emerging Computer Technologies to Improve the Effectiveness of Reading and Writing Therapies in Children with Down Syndrome

ERIC Educational Resources Information Center

Felix, Vanessa G.; Mena, Luis J.; Ostos, Rodolfo; Maestre, Gladys E.

2017-01-01

Despite the potential benefits that computer approaches could provide for children with cognitive disabilities, research and implementation of emerging approaches to learning supported by computing technology has not received adequate attention. We conducted a pilot study to assess the effectiveness of a computer-assisted learning tool, named…

An Exploration of Bias in Meta-Analysis: The Case of Technology Integration Research in Higher Education

ERIC Educational Resources Information Center

Bernard, Robert M.; Borokhovski, Eugene; Schmid, Richard F.; Tamim, Rana M.

2014-01-01

This article contains a second-order meta-analysis and an exploration of bias in the technology integration literature in higher education. Thirteen meta-analyses, dated from 2000 to 2014 were selected to be included based on the questions asked and the presence of adequate statistical information to conduct a quantitative synthesis. The weighted…

Information and Communication Technology Profiles of College Students with Learning Disabilities and Adequate and Very Poor Readers

ERIC Educational Resources Information Center

Fichten, Catherine S.; Nguyen, Mai N.; King, Laura; Barile, Maria; Havel, Alice; Mimouni, Zohra; Chauvin, Alexandre; Budd, Jillian; Raymond, Odette; Juhel, Jean-Charles; Asuncion, Jennison

2013-01-01

We interviewed 58 experts (30 in French, 28 in English) about potentially useful information and communication technologies (ICTs) for Québec college students with a learning disability (LD) and evaluated whether college students with an LD (n = 74), in fact, used these. We also compared ICT use, learning opportunities, and attitudes among three…

Maintaining Adequate CO2 Washout for an Advanced EMU via a New Rapid Cycle Amine Technology

NASA Technical Reports Server (NTRS)

Chullen, Cinda

2011-01-01

Over the past several years, NASA has realized tremendous progress in Extravehicular Activity (EVA) technology development. This has been evidenced by the progressive development of a new Rapic Cycle Amine (RCA) system for the Advanced Extravehicular Mobility Unit (AEMU) Portable Life Support Subsystem (PLSS). The PLSS is responsible for the life support of the crew member in the spacesuit. The RCA technology is responsible for carbon dioxide (CO2) and humidity control. Another aspect of the RCA is that it is on-back vacuum-regenerable, efficient, and reliable. The RCA also simplifies the PLSS schematic by eliminating the need for a condensing heat exchanger for humidity control in the current EMU. As development progresses on the RCA, it is important that the sizing be optimized so that the demand on the PLSS battery is minimized. As well, maintaining the CO2 washout at adequate levels during an EVA is an absolute requirement of the RCA and associated ventilation system. Testing has been underway in-house at NASA Johnson Space Center and analysis has been initiated to evaluate whether the technology provides exemplary performance in ensuring that the CO2 is removed sufficiently enough and the ventilation flow is adequate enough to maintain CO2 1 Project Engineer, Space Suit and Crew Survival Systems Branch, Crew and Thermal Systems Division, 2101 NASA Parkway, Houston, TX 77058/EC5. washout in the AEMU spacesuit helmet of the crew member during an EVA. This paper will review the recent developments of the RCA unit, the testing results performed in-house with a spacesuit simulator, and the associated analytical work along with insights from the medical aspect on the testing.

Characterization of thin solid films and surfaces by infrared spectroscopy

NASA Astrophysics Data System (ADS)

Grosse, Peter

Thin solid films and surfaces are characterized by means of IR-spectroscopy. Properties under consideration are geometric structures of layers and stacks of layers, chemical composition and incorporation of impurities, and parameters of free electrons and holes. The method is based on reflectance and transmittance measurements, in particular with polarized light at oblique incidence. Thus the interaction of the electromagnetic waves with thin films is enhanced and two independent data sets for s- and p-polarization are available. The interpretation of the measured spectra is carried out by a fit procedure, simulating the observed spectra by an adequate model. For fitting we use an ansatz of a dielectric function which is a sum of susceptibilities taking into account the contributions of valence electrons, optical phonons, free carriers, and of impurities. As examples for the method we discuss the following systems: insulating and percolating films of Ag deposited on glass, epitactic III-V-heterostructures, oxide films as used for MOS-structures, diffusion and implantation profiles, and adsorbates on metals. All examples are relevant for application in technology, as microelectronics, thin film technology, catalysis e.g. The reliability of the non-destructive IR-method is compared with other relevant analytic methods as SIMS, RBS, and AES.

Color management in textile application

NASA Astrophysics Data System (ADS)

De Lucia, Maurizio; Vannucci, Massimiliano; Buonopane, Massimo; Fabroni, Cosimo; Fabrini, Francesco

2002-03-01

The aim of this research was to study a system of acquisition and processing of images capable of confronting colored wool with a reference specimen, in order to define the conformity using objective parameters. The first step of the research was to comprise and to analyze in depth the problem: there has been numerous implications of technical, physical, cultural, biological and also psychological character, that come down from the attempt of giving a quantitative appraisal to the color. In the scene of the national and international scientific and technological research, little has been made as regards measurement of color through digital processing of the images through linear CCD. The reason is fundamentally of technological nature: only during the last years we found the presence on the market of low cost equipment capable of acquiring and processing images with adequate performances and qualities. The job described has permitted to create a first prototype of system for the color measuring with use of CCD linear devices. -Hardware identification to carry out a series of tests and experiments in laboratory. -Verification of such device in a textile facility. -Statistics analysis of the collected data and of the employed models.

Initial constructs for patient-centered outcome measures to evaluate brain-computer interfaces.

PubMed

Andresen, Elena M; Fried-Oken, Melanie; Peters, Betts; Patrick, Donald L

2016-10-01

The authors describe preliminary work toward the creation of patient-centered outcome (PCO) measures to evaluate brain-computer interface (BCI) as an assistive technology (AT) for individuals with severe speech and physical impairments (SSPI). In Phase 1, 591 items from 15 existing measures were mapped to the International Classification of Functioning, Disability and Health (ICF). In Phase 2, qualitative interviews were conducted with eight people with SSPI and seven caregivers. Resulting text data were coded in an iterative analysis. Most items (79%) were mapped to the ICF environmental domain; over half (53%) were mapped to more than one domain. The ICF framework was well suited for mapping items related to body functions and structures, but less so for items in other areas, including personal factors. Two constructs emerged from qualitative data: quality of life (QOL) and AT. Component domains and themes were identified for each. Preliminary constructs, domains and themes were generated for future PCO measures relevant to BCI. Existing instruments are sufficient for initial items but do not adequately match the values of people with SSPI and their caregivers. Field methods for interviewing people with SSPI were successful, and support the inclusion of these individuals in PCO research. Implications for Rehabilitation Adapted interview methods allow people with severe speech and physical impairments to participate in patient-centered outcomes research. Patient-centered outcome measures are needed to evaluate the clinical implementation of brain-computer interface as an assistive technology.

The Leap of a Provincial SME into the Global Market Using E-commerce: The Success of Adequate Planning

NASA Astrophysics Data System (ADS)

Sainz de Abajo, Beatriz; García Salcines, Enrique; Burón Fernández, F. Javier; López Coronado, Miguel; de Castro Lozano, Carlos

The leap into the global market is not easy when it involves a provincial family business. This article demonstrates how adequate planning is fundamental in a small and medium-sized enterprise (SME) with the tight budget they have available to them, in order to be able to differentiate themselves in a highly competitive market, taking into accounts the benefits and risks involved. The Information Technology (IT) tools put in place will give the necessary support and allow for the possibility of increasing and improving the infrastructure as the company requires. An adequate strategy for the future to increases sales would be e-marketing techniques as well as the current promotions which contribute to diffusing the brand.

Congruency of scapula locking plates: implications for implant design.

PubMed

Park, Andrew Y; DiStefano, James G; Nguyen, Thuc-Quyen; Buckley, Jenni M; Montgomery, William H; Grimsrud, Chris D

2012-04-01

We conducted a study to evaluate the congruency of fit of current scapular plate designs. Three-dimensional image-processing and -analysis software, and computed tomography scans of 12 cadaveric scapulae were used to generate 3 measurements: mean distance from plate to bone, maximum distance, and percentage of plate surface within 2 mm of bone. These measurements were used to quantify congruency. The scapular spine plate had the most congruent fit in all 3 measured variables. The lateral border and glenoid plates performed statistically as well as the scapular spine plate in at least 1 of the measured variables. The medial border plate had the least optimal measurements in all 3 variables. With locking-plate technology used in a wide variety of anatomical locations, the locking scapula plate system can allow for a fixed-angle construct in this region. Our study results showed that the scapular spine, glenoid, and lateral border plates are adequate in terms of congruency. However, design improvements may be necessary for the medial border plate. In addition, we describe a novel method for quantifying hardware congruency, a method that can be applied to any anatomical location.

Proliferation risks from nuclear power infrastructure

NASA Astrophysics Data System (ADS)

Squassoni, Sharon

2017-11-01

Certain elements of nuclear energy infrastructure are inherently dual-use, which makes the promotion of nuclear energy fraught with uncertainty. Are current restraints on the materials, equipment, and technology that can be used either to produce fuel for nuclear electricity generation or material for nuclear explosive devices adequate? Technology controls, supply side restrictions, and fuel market assurances have been used to dissuade countries from developing sensitive technologies but the lack of legal restrictions is a continued barrier to permanent reduction of nuclear proliferation risks.

The First ECPD Accredited Environmental B. Tech. Program

ERIC Educational Resources Information Center

Rowe, Donald R.; Russell, John P.

1975-01-01

Describes the first bachelor of science program in environmental engineering technology, with objectives of providing adequate training in the control of air, water, and land pollution. Includes a four-year curriculum plan. (MLH)

Emerging Technologies and Techniques for Wide Area Radiological Survey and Remediation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sutton, M.; Zhao, P.

2016-03-24

Technologies to survey and decontaminate wide-area contamination and process the subsequent radioactive waste have been developed and implemented following the Chernobyl nuclear power plant release and the breach of a radiological source resulting in contamination in Goiania, Brazil. These civilian examples of radioactive material releases provided some of the first examples of urban radiological remediation. Many emerging technologies have recently been developed and demonstrated in Japan following the release of radioactive cesium isotopes (Cs-134 and Cs-137) from the Fukushima Dai-ichi nuclear power plant in 2011. Information on technologies reported by several Japanese government agencies, such as the Japan Atomic Energymore » Agency (JAEA), the Ministry of the Environment (MOE) and the National Institute for Environmental Science (NIES), together with academic institutions and industry are summarized and compared to recently developed, deployed and available technologies in the United States. The technologies and techniques presented in this report may be deployed in response to a wide area contamination event in the United States. In some cases, additional research and testing is needed to adequately validate the technology effectiveness over wide areas. Survey techniques can be deployed on the ground or from the air, allowing a range of coverage rates and sensitivities. Survey technologies also include those useful in measuring decontamination progress and mapping contamination. Decontamination technologies and techniques range from non-destructive (e.g., high pressure washing) and minimally destructive (plowing), to fully destructive (surface removal or demolition). Waste minimization techniques can greatly impact the long-term environmental consequences and cost following remediation efforts. Recommendations on technical improvements to address technology gaps are presented together with observations on remediation in Japan.« less

An Assessment of the Adequacy of Ohio School Funding: New Performance Standards and Alternative Measurements of Adequacy

ERIC Educational Resources Information Center

Sweetland, Scott R.

2015-01-01

Reflecting upon "Rose v. Council," this research traced the development of adequate school funding in Ohio. "DeRolph v. State" centered the constitutional requirement for adequate education in Ohio. Thereafter, scholars estimated costs of adequate education and legislators adjusted those estimated costs. Plaintiffs and justices…

NASA Office of Aeronautics and Space Technology Summer Workshop. Volume 4: Power technology panel

NASA Technical Reports Server (NTRS)

1975-01-01

Technology requirements in the areas of energy sources and conversion, power processing, distribution, conversion, and transmission, and energy storage are identified for space shuttle payloads. It is concluded that the power system technology currently available is adequate to accomplish all missions in the 1973 Mission Model, but that further development is needed to support space opportunities of the future as identified by users. Space experiments are proposed in the following areas: power generation in space, advanced photovoltaic energy converters, solar and nuclear thermoelectric technology, nickel-cadmium batteries, flywheels (mechanical storage), satellite-to-ground transmission and reconversion systems, and regenerative fuel cells.

Technological Advances in Psychiatric Nursing: An update.

PubMed

Bostrom, Andrea C

2016-06-01

Understanding and treating mental illness has improved in many ways as a result of the fast pace of technological advances. The technologies that have the greatest potential impact are those that (1) increase the knowledge of how the brain functions and changes based on interventions, (2) have the potential to personalize interventions based on understanding genetic factors of drug metabolism and pharmacodynamics, and (3) use information technology to provide treatment in the absence of an adequate mental health workforce. Technologies are explored for psychiatric nurses to consider. Psychiatric nurses are encouraged to consider the experiences of psychiatric patients, including poor health, stigmatization, and suffering. Copyright © 2016 Elsevier Inc. All rights reserved.

Technology requirements for an orbiting fuel depot - A necessary element of a space infrastructure

NASA Technical Reports Server (NTRS)

Stubbs, R. M.; Corban, R. R.; Willoughby, A. J.

1988-01-01

Advanced planning within NASA has identified several bold space exploration initiatives. The successful implementation of these missions will require a supporting space infrastructure which would include a fuel depot, an orbiting facility to store, transfer and process large quantities of cryogenic fluids. In order to adequately plan the technology development programs required to enable the construction and operation of a fuel depot, a multidisciplinary workshop was convened to assess critical technologies and their state of maturity. Since technology requirements depend strongly on the depot design assumptions, several depot concepts are presented with their effect of criticality ratings. Over 70 depot-related technology areas are addressed.

Technology requirements for an orbiting fuel depot: A necessary element of a space infrastructure

NASA Technical Reports Server (NTRS)

Stubbs, R. M.; Corban, R. R.; Willoughby, A. J.

1988-01-01

Advanced planning within NASA has identified several bold space exploration initiatives. The successful implementation of these missions will require a supporting space infrastructure which would include a fuel depot, an orbiting facility to store, transfer and process large quantities of cryogenic fluids. In order to adequately plan the technology development programs required to enable the construction and operation of a fuel depot, a multidisciplinary workshop was convened to assess critical technologies and their state of maturity. Since technology requirements depend strongly on the depot design assumptions, several depot concepts are presented with their effect on criticality ratings. Over 70 depot-related technology areas are addressed.

Technology readiness levels for the new millennium program

NASA Technical Reports Server (NTRS)

Moynihan, P. I.; Minning, C. P.; Stocky, J. F.

2003-01-01

NASA's New Millennium Program (NMP) seeks to advance space exploration by providing an in-space validating mechanism to verify the maturity of promising advanced technologies that cannot be adequately validated with Earth-based testing alone. In meeting this objective, NMP uses NASA Technology Readiness Levels (TRL) as key indicators of technology advancement and assesses development progress against this generalized metric. By providing an opportunity for in-space validation, NMP can mature a suitable advanced technology from TRL 4 (component and/or breadboard validation in laboratory environment) to a TRL 7 (system prototype demonstrated in an Earth-based space environment). Spaceflight technology comprises a myriad of categories, types, and functions, and as each individual technology emerges, a consistent interpretation of its specific state of technological advancement relative to other technologies is problematic.

Systematic Refinement of a Health Information Technology Time and Motion Workflow Instrument for Inpatient Nursing Care using a Standardized Interface Terminology

PubMed Central

Zhang, Yi; Monsen, Karen A; Adam, Terrence J; Pieczkiewicz, David S; Daman, Megan; Melton, Genevieve B

2011-01-01

Time and motion (T&M) studies provide an objective method to measure the expenditure of time by clinicians. While some instruments for T&M studies have been designed to evaluate health information technology (HIT), these instruments have not been designed for nursing workflow. We took an existing open source HIT T&M study application designed to evaluate physicians in the ambulatory setting and rationally adapted it through empiric observations to record nursing activities in the inpatient setting and linked this instrument to an existing interface terminology, the Omaha System. Nursing activities involved several dimensions and could include multiple activities occurring simultaneously, requiring significant instrument redesign. 94% of the activities from the study instrument mapped adequately to the Omaha System. T&M study instruments require customization in design optimize them for different environments, such as inpatient nursing, to enable optimal data collection. Interface terminologies show promise as a framework for recording and analyzing T&M study data. PMID:22195228

Superconducting rebalance acceleration and rate sensor

NASA Technical Reports Server (NTRS)

Torti, R.; Gerver, M.; Gondhalekar, V.; Maxwell, B.

1994-01-01

The goal of this program is the development of a high precision multisensor based on a high T(sub c) superconducting proof mass. The design of a prototype is currently underway. Key technical issues appear resolvable. High temperature superconductors have complicated, hysteretic flux dynamics but the forces on them can be linearly controlled for small displacements. Current data suggests that the forces on the superconductors decay over a short time frame and then stabilize, though very long term data is not available. The hysteretic force characteristics are substantial for large scale excursions, but do not appear to be an issue for the very small displacements required in this device. Sufficient forces can be exerted for non-contact suspension of a centimeter sized proof mass in a vacuum sealed nitrogen jacket cryostat. High frequency capacitive sensing using stripline technology will yield adequate position resolution for 0.1 micro-g measurements at 100 Hz. Overall, a reasonable cost, but very high accuracy, system is feasible with this technology.

Superconducting rebalance acceleration and rate sensor

NASA Astrophysics Data System (ADS)

Torti, R.; Gerver, M.; Gondhalekar, V.; Maxwell, B.

1994-05-01

The goal of this program is the development of a high precision multisensor based on a high T(sub c) superconducting proof mass. The design of a prototype is currently underway. Key technical issues appear resolvable. High temperature superconductors have complicated, hysteretic flux dynamics but the forces on them can be linearly controlled for small displacements. Current data suggests that the forces on the superconductors decay over a short time frame and then stabilize, though very long term data is not available. The hysteretic force characteristics are substantial for large scale excursions, but do not appear to be an issue for the very small displacements required in this device. Sufficient forces can be exerted for non-contact suspension of a centimeter sized proof mass in a vacuum sealed nitrogen jacket cryostat. High frequency capacitive sensing using stripline technology will yield adequate position resolution for 0.1 micro-g measurements at 100 Hz. Overall, a reasonable cost, but very high accuracy, system is feasible with this technology.

Evaluation of morphological indices and total body electrical conductivity to assess body composition in big brown bats

USGS Publications Warehouse

Pearce, R.D.; O'Shea, T.J.; Wunder, B.A.

2008-01-01

Bat researchers have used both morphological indices and total body electric conductivity (TOBEC) as proxies for body condition in a variety of studies, but have typically not validated these indices against direct measurement of body composition. We quantified body composition (total carcass lipids) to determine if morphological indices were useful predictors of body condition in big brown bats (Eptesicus fuscus). We also evaluated body composition indirectly by TOBEC using EM-SCAN?? technology. The most important predictors of body composition in multiple regression analysis were body mass-to-forearm ratio (partial r2 = 0.82, P < 0.001) followed by TOBEC measurement (partial r2 = 0.08, P < 0.001) and to a minor extent head length (partial r2 = 0.02, P < 0.05). Morphological condition indices alone may be adequate for some studies because of lower cost and effort. Marking bats with passive integrated transponder (PIT) tags affected TOBEC measurements. ?? Museum and Institute of Zoology PAS.

Laser SRS tracker for reverse prototyping tasks

NASA Astrophysics Data System (ADS)

Kolmakov, Egor; Redka, Dmitriy; Grishkanich, Aleksandr; Tsvetkov, Konstantin

2017-10-01

According to the current great interest concerning Large-Scale Metrology applications in many different fields of manufacturing industry, technologies and techniques for dimensional measurement have recently shown a substantial improvement. Ease-of-use, logistic and economic issues, as well as metrological performance, are assuming a more and more important role among system requirements. The project is planned to conduct experimental studies aimed at identifying the impact of the application of the basic laws of chip and microlasers as radiators on the linear-angular characteristics of existing measurement systems. The project is planned to conduct experimental studies aimed at identifying the impact of the application of the basic laws of microlasers as radiators on the linear-angular characteristics of existing measurement systems. The system consists of a distributed network-based layout, whose modularity allows to fit differently sized and shaped working volumes by adequately increasing the number of sensing units. Differently from existing spatially distributed metrological instruments, the remote sensor devices are intended to provide embedded data elaboration capabilities, in order to share the overall computational load.

Application of a compact diode pumped solid-state laser source for quantitative laser-induced breakdown spectroscopy analysis of steel

NASA Astrophysics Data System (ADS)

Tortschanoff, Andreas; Baumgart, Marcus; Kroupa, Gerhard

2017-12-01

Laser-induced breakdown spectroscopy (LIBS) technology holds the potential for onsite real-time measurements of steel products. However, for a mobile and robust LIBS measurement system, an adequate small and ruggedized laser source is a key requirement. In this contribution, we present tests with our compact high-power laser source, which, initially, was developed for ignition applications. The CTR HiPoLas® laser is a robust diode pumped solid-state laser with a passive Q-switch with dimensions of less than 10 cm3. The laser generates 2.5-ns pulses with 30 mJ at a maximum continuous repetition rate of about 30 Hz. Feasibility of LIBS experiments with the laser source was experimentally verified with steel samples. The results show that the laser with its current optical output parameters is very well-suited for LIBS measurements. We believe that the miniaturized laser presented here will enable very compact and robust portable high-performance LIBS systems.

Exploring Operational Test and Evaluation of Unmanned Aircraft Systems: A Qualitative Case Study

NASA Astrophysics Data System (ADS)

Saliceti, Jose A.

The purpose of this qualitative case study was to explore and identify strategies that may potentially remedy operational test and evaluation procedures used to evaluate Unmanned Aircraft Systems (UAS) technology. The sample for analysis consisted of organizations testing and evaluating UASs (e.g., U.S. Air Force, U.S. Navy, U.S. Army, U.S. Marine Corps, U.S. Coast Guard, and Customs Border Protection). A purposeful sampling technique was used to select 15 subject matter experts in the field of operational test and evaluation of UASs. A questionnaire was provided to participants to construct a descriptive and robust research. Analysis of responses revealed themes related to each research question. Findings revealed operational testers utilized requirements documents to extrapolate measures for testing UAS technology and develop critical operational issues. The requirements documents were (a) developed without the contribution of stakeholders and operational testers, (b) developed with vague or unrealistic measures, and (c) developed without a systematic method to derive requirements from mission tasks. Four approaches are recommended to develop testable operational requirements and assist operational testers: (a) use a mission task analysis tool to derive requirements for mission essential tasks for the system, (b) exercise collaboration among stakeholders and testers to ensure testable operational requirements based on mission tasks, (c) ensure testable measures are used in requirements documents, and (d) create a repository list of critical operational issues by mission areas. The preparation of operational test and evaluation processes for UAS technology is not uniform across testers. The processes in place are not standardized, thus test plan preparation and reporting are different among participants. A standard method to prepare and report UAS technology should be used when preparing and reporting on UAS technology. Using a systematic process, such as mission-based test design, resonated among participants as an analytical method to link UAS mission tasks and measures of performance to the capabilities of the system under test when developing operational test plans. Further research should examine system engineering designs for system requirements traceability matrix of mission tasks and subtasks while using an analysis tool that adequately evaluates UASs with an acceptable level of confidence in the results.

Effects of Varying Gravity Levels on fNIRS Headgear Performance and Signal Recovery

NASA Technical Reports Server (NTRS)

Mackey, Jeffrey R.; Harrivel, Angela R.; Adamovsky, Grigory; Lewandowski, Beth E.; Gotti, Daniel J.; Tin, Padetha; Floyd, Bertram M.

2013-01-01

This paper reviews the effects of varying gravitational levels on functional Near-Infrared Spectroscopy (fNIRS) headgear. The fNIRS systems quantify neural activations in the cortex by measuring hemoglobin concentration changes via optical intensity. Such activation measurement allows for the detection of cognitive state, which can be important for emotional stability, human performance and vigilance optimization, and the detection of hazardous operator state. The technique depends on coupling between the fNIRS probe and users skin. Such coupling may be highly susceptible to motion if probe-containing headgear designs are not adequately tested. The lack of reliable and self-applicable headgear robust to the influence of motion artifact currently inhibits its operational use in aerospace environments. Both NASAs Aviation Safety and Human Research Programs are interested in this technology as a method of monitoring cognitive state of pilots and crew.

Design and development of a cross-cultural disposition inventory

NASA Astrophysics Data System (ADS)

Davies, Randall; Zaugg, Holt; Tateishi, Isaku

2015-01-01

Advances in technology have increased the likelihood that engineers will have to work in a global, culturally diverse setting. Many schools of engineering are currently revising their curricula to help students to develop cultural competence. However, our ability to measure cultural dispositions can be a challenge. The purpose of this project was to develop and test an instrument that measures the various aspects of cultural disposition. The results of the validation process verified that the hypothesised model adequately represented the data. The refined instrument produced a four-factor model for the overall construct. The validation process for the instrument verified the existence of specific subcomponents that form the overall cultural disposition construct. There also seems to be a hierarchical relationship within the subcomponents of cultural disposition. Additional research is needed to explore which aspects of cultural disposition affect an individual's ability to work effectively in a culturally diverse engineering team.

Some implications of the technology assessment function for the effective public decision-making process

NASA Technical Reports Server (NTRS)

Mayo, L. H.

1971-01-01

A preliminary provisional assessment of the prospects for the establishment of an adequate technology assessment function and the implications of the assessment function for the public decision process are presented. Effects of the technology assessment function on each phase of the public decision process and briefly explored. Significant implications during the next decade are projected with respect to the following phases: invention and development of alternative means (technological configurations); evaluation, selection and promotion of preferred courses of action; and modification of statutory scheme or social action program as an outcome of continuing monitoring and appraisal.

Hyperparameter Classification of Arctic Sea Ice and Snow Based on Aerial Laser Data, Passive Microwave Data and Field Data

NASA Astrophysics Data System (ADS)

Herzfeld, U. C.; Maslanik, J.; Williams, S.; Sturm, M.; Cavalieri, D.

2006-12-01

In the past year, the Arctic sea-ice cover has been shrinking at an alarming rate. Remote-sensing technologies provide opportunities for observations of the sea ice at unprecedented repetition rates and spatial resolutions. The advance of new observational technologies is not only fascinating, it also brings with it the challenge and necessity to derive adequate new geoinformatical and geomathematical methods as a basis for analysis and geophysical interpretation of new data types. Our research includes validation and analysis of NASA EOS data, development of observational instrumentation and advanced geoinformatics. In this talk we emphasize the close linkage between technological development and geoinformatics along case studies of sea-ice near Point Barrow, Alaska, based on the following data types: AMSR-E and PSR passive microwave data, RADARSAT and ERS SAR data, manually-collected snow-depth data and laser-elevation data from unmanned aerial vehicles. The hyperparameter concept is introduced to facilitate characterization and classification of the same sea-ice properties and spatial structures from these data sets, which differ with respect to spatial resolution, measured parameters and observed geophysical variables. Mathematically, this requires parameter identification in undersampled, oversampled or overprinted situations.

Role of Information Communication Technology in Higher Education: Learners Perspective in Rural Medical Schools

PubMed Central

Waghmare, Lalitbhushan S; Jagzape, Arunita T; Rawekar, Alka T; Quazi, Nazli Z; Mishra, Ved Prakash

2014-01-01

Background: Higher education has undergone profound transformation due to recent technological advancements. Resultantly health profession students have a strong base to utilize information technology for their professional development. Studies over recent past reflect a striking change in pattern of technology usage amongst medical students expanding prospects exponentially by e-books, science apps, readymade power-point presentations, evidence based medicine, Wikipedia, etc. Aim & Objectives: The study was undertaken with an aim to explore the general perceptions of medical students and faculties about the role of Information Communication Technology in higher education and to gauge student’s dependence on the same for seeking knowledge and information. Study Design: Cross-sectional, mixed research design. Materials and Methods: The study was conducted in Department of Physiology, Datta Meghe Institute of Medical Sciences (Deemed University). Study population included students (n=150) and teaching faculty (n=10) of Ist phase of medical curriculum. The survey questionnaire (10 closed ended and 5 open ended items) and Focus group discussion (FGD) captured the perceptions and attitudes of students and faculties respectively regarding the role and relevance of technology in higher education. Observations and Results: Quantitative analysis of closed ended responses was done by percentage distribution and Qualitative analysis of open ended responses and FGD excerpts was done by coding and observing the trends and patterns respectively. Overall the observations were in favour of increasing usability and dependability on technology as ready reference tool of subject information. Learners valued text books and technology almost equally and regarded computer training as a desirable incorporation in medical curriculum. Conclusion: Role of technology in education should be anticipated and appropriate measures should be undertaken for its adequate and optimum utilization by proper training of students as well as facilitators. PMID:25121049

Role of information communication technology in higher education: learners perspective in rural medical schools.

PubMed

Srivastava, Tripti K; Waghmare, Lalitbhushan S; Jagzape, Arunita T; Rawekar, Alka T; Quazi, Nazli Z; Mishra, Ved Prakash

2014-06-01

Higher education has undergone profound transformation due to recent technological advancements. Resultantly health profession students have a strong base to utilize information technology for their professional development. Studies over recent past reflect a striking change in pattern of technology usage amongst medical students expanding prospects exponentially by e-books, science apps, readymade power-point presentations, evidence based medicine, Wikipedia, etc. Aim & Objectives: The study was undertaken with an aim to explore the general perceptions of medical students and faculties about the role of Information Communication Technology in higher education and to gauge student's dependence on the same for seeking knowledge and information. Cross-sectional, mixed research design. The study was conducted in Department of Physiology, Datta Meghe Institute of Medical Sciences (Deemed University). Study population included students (n=150) and teaching faculty (n=10) of I(st) phase of medical curriculum. The survey questionnaire (10 closed ended and 5 open ended items) and Focus group discussion (FGD) captured the perceptions and attitudes of students and faculties respectively regarding the role and relevance of technology in higher education. Quantitative analysis of closed ended responses was done by percentage distribution and Qualitative analysis of open ended responses and FGD excerpts was done by coding and observing the trends and patterns respectively. Overall the observations were in favour of increasing usability and dependability on technology as ready reference tool of subject information. Learners valued text books and technology almost equally and regarded computer training as a desirable incorporation in medical curriculum. Role of technology in education should be anticipated and appropriate measures should be undertaken for its adequate and optimum utilization by proper training of students as well as facilitators.

Updated Classrooms for Updated Curriculum.

ERIC Educational Resources Information Center

Phillips, Joanne B.

1986-01-01

Based on an unspecified number of teachers surveyed and onsite visits, agreement exists about some features of optimum facilities for secondary classes in electronic technology. All involved wanted more security, adequate wiring, protection for the equipment, and environmental control. (MLF)

Coordinate measuring system based on microchip lasers for reverse prototyping

NASA Astrophysics Data System (ADS)

Iakovlev, Alexey; Grishkanich, Alexsandr S.; Redka, Dmitriy; Tsvetkov, Konstantin

2017-02-01

According to the current great interest concerning Large-Scale Metrology applications in many different fields of manufacturing industry, technologies and techniques for dimensional measurement have recently shown a substantial improvement. Ease-of-use, logistic and economic issues, as well as metrological performance, are assuming a more and more important role among system requirements. The project is planned to conduct experimental studies aimed at identifying the impact of the application of the basic laws of chip and microlasers as radiators on the linear-angular characteristics of existing measurement systems. The project is planned to conduct experimental studies aimed at identifying the impact of the application of the basic laws of microlasers as radiators on the linear-angular characteristics of existing measurement systems. The system consists of a distributed network-based layout, whose modularity allows to fit differently sized and shaped working volumes by adequately increasing the number of sensing units. Differently from existing spatially distributed metrological instruments, the remote sensor devices are intended to provide embedded data elaboration capabilities, in order to share the overall computational load.

Analysis and Description of HOLTIN Service Provision for AECG monitoring in Complex Indoor Environments

PubMed Central

Led, Santiago; Azpilicueta, Leire; Aguirre, Erik; de Espronceda, Miguel Martínez; Serrano, Luis; Falcone, Francisco

2013-01-01

In this work, a novel ambulatory ECG monitoring device developed in-house called HOLTIN is analyzed when operating in complex indoor scenarios. The HOLTIN system is described, from the technological platform level to its functional model. In addition, by using in-house 3D ray launching simulation code, the wireless channel behavior, which enables ubiquitous operation, is performed. The effect of human body presence is taken into account by a novel simplified model embedded within the 3D Ray Launching code. Simulation as well as measurement results are presented, showing good agreement. These results may aid in the adequate deployment of this novel device to automate conventional medical processes, increasing the coverage radius and optimizing energy consumption. PMID:23584122

Nutrition and food technology for a Controlled Ecological Life Support System (CELSS)

NASA Technical Reports Server (NTRS)

Glaser, P. E.; Mabel, J. A.

1981-01-01

Food technology requirements and a nutritional strategy for a Controlled Ecological Life Support System (CELSS) to provide adequate food in an acceptable form in future space missions are discussed. The establishment of nutritional requirements, dietary goals, and a food service system to deliver acceptable foods in a safe and healthy form and the development of research goals and priorities were the main objectives of the study.

Interconnected or disconnected? Promotion of mental health and prevention of mental disorder in the digital age

PubMed Central

Hayes, Joseph F; Maughan, Daniel L; Grant-Peterkin, Hugh

2016-01-01

Summary To date there have been few peer-reviewed studies on the feasibility, acceptability and effectiveness of digital technologies for mental health promotion and disorder prevention. Any evaluation of these evolving technologies is complicated by a lack of understanding about the specific risks and possible benefits of the many forms of internet use on mental health. In order to adequately meet the mental health needs of today’s society, psychiatry must engage in rigorous assessment of the impact of digital technologies. PMID:26932479

A review of security of electronic health records.

PubMed

Win, Khin Than

The objective of this study is to answer the research question, "Are current information security technologies adequate for electronic health records (EHRs)?" In order to achieve this, the following matters have been addressed in this article: (i) What is information security in the context of EHRs? (ii) Why is information security important for EHRs? and (iii) What are the current technologies for information security available to EHRs? It is concluded that current EHR security technologies are inadequate and urgently require improvement. Further study regarding information security of EHRs is indicated.

Interconnected or disconnected? Promotion of mental health and prevention of mental disorder in the digital age.

PubMed

Hayes, Joseph F; Maughan, Daniel L; Grant-Peterkin, Hugh

2016-03-01

To date there have been few peer-reviewed studies on the feasibility, acceptability and effectiveness of digital technologies for mental health promotion and disorder prevention. Any evaluation of these evolving technologies is complicated by a lack of understanding about the specific risks and possible benefits of the many forms of internet use on mental health. To adequately meet the mental health needs of today's society, psychiatry must engage in rigorous assessment of the impact of digital technologies. © The Royal College of Psychiatrists 2016.

A systems approach to purchasing and implementing new technology.

PubMed

Kinney, Kristin

2007-01-01

There are many risks associated with purchasing and implementing new technology. The challenge is to reduce these risks to gain maximum benefit from the new technology purchased. In the high-cost world of healthcare, there is little room for wasting time and money related to technology implementation. If the workflow of the current system is not adequately understood before purchasing and implementing a new technology, that technology may mask underlying problems and/or create new ones. The purpose of this article is to present a framework for analyzing the current process or system, identifying the strengths and the areas in need of improvement. A thorough understanding of the problems with the current system and the barriers to change is necessary to ensure the selection of the "right" technology and promote its implementation.

Preliminary validation of the Spanish version of the Multiple Stimulus Types Ambiguity Tolerance Scale (MSTAT-II).

PubMed

Arquero, José L; McLain, David L

2010-05-01

Despite widespread interest in ambiguity tolerance and other information-related individual differences, existing measures are conceptually dispersed and psychometrically weak. This paper presents the Spanish version of MSTAT-II, a short, stimulus-oriented, and psychometrically improved measure of an individual's orientation toward ambiguous stimuli. Results obtained reveal adequate reliability, validity, and temporal stability. These results support the use of MSTAT-II as an adequate measure of ambiguity tolerance.

Improving recombinant protein purification yield

USDA-ARS?s Scientific Manuscript database

Production of adequate amounts of recombinant proteins is essential for antibody production, biochemical activity study, and structural determination during the post-genomic era. It’s technologically challenging and a limiting factor for tung oil research because analytical reagents such as high qua...

Harnessing Pavement Power : Developing Renewable Energy Technology in the Public Right-of-Way

DOT National Transportation Integrated Search

2013-09-18

Intelligent Compaction (IC) of soil and asphalt mixes is an innovative approach that has been utilized to achieve uniform, adequate compaction of pavement layers during construction. Commercially available IC products provide machine specific compact...

48 CFR 339.7100 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Information Security Management 339.7100 Definitions. As used in this subpart, the following definitions shall apply: Adequate security means, in accordance with OMB Circular A-130, Management of Federal Information Resources, Appendix 3 (Security of Federal...

48 CFR 339.7100 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Information Security Management 339.7100 Definitions. As used in this subpart, the following definitions shall apply: Adequate security means, in accordance with OMB Circular A-130, Management of Federal Information Resources, Appendix 3 (Security of Federal...

48 CFR 339.7100 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Information Security Management 339.7100 Definitions. As used in this subpart, the following definitions shall apply: Adequate security means, in accordance with OMB Circular A-130, Management of Federal Information Resources, Appendix 3 (Security of Federal...

48 CFR 339.7100 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Information Security Management 339.7100 Definitions. As used in this subpart, the following definitions shall apply: Adequate security means, in accordance with OMB Circular A-130, Management of Federal Information Resources, Appendix 3 (Security of Federal...

Wireless sensor networks for irrigation management

USDA-ARS?s Scientific Manuscript database

Sustaining an adequate food supply for the world's population will require advancements in irrigation technology and improved irrigation management. Site-specific irrigation and automatic irrigation scheduling are examples of strategies to deal with declining arable land and limited fresh water reso...

Use of an intravascular fluorescent continuous glucose sensor in subjects with type 1 diabetes mellitus.

PubMed

Romey, Matthew; Jovanovič, Lois; Bevier, Wendy; Markova, Kateryna; Strasma, Paul; Zisser, Howard

2012-11-01

Stress hyperglycemia in the critically ill is associated with increased morbidity and mortality. Continuous glucose monitoring offers a solution to the difficulties of dosing intravenous insulin properly to maintain glycemic control. The purpose of this study was to evaluate an intravascular continuous glucose monitoring (IV-CGM) system with a sensing element based on the concept of quenched fluorescence. A second-generation intravascular continuous glucose sensor was evaluated in 13 volunteer subjects with type 1 diabetes mellitus. There were 21 study sessions of up to 24 h in duration. Sensors were inserted into peripheral veins of the upper extremity, up to two sensors per subject per study session. Sensor output was compared with temporally correlated reference measurements obtained from venous samples on a laboratory glucose analyzer. Data were obtained from 23 sensors in 13 study sessions with 942 paired reference values. Fourteen out of 23 sensors (60.9%) had a mean absolute relative difference ≤ 10%. Eighty-nine percent of paired points were in the clinically accurate A zone of the Clarke error grid and met ISO 15197 performance criteria. Adequate venous blood flow was identified as a necessary condition for accuracy when local sensor readings are compared with venous blood glucose. The IV-CGM system was capable of achieving a high level of glucose measurement accuracy. However, superficial peripheral veins may not provide adequate blood flow for reliable indwelling blood glucose monitoring. © 2012 Diabetes Technology Society.

Quality of Informal Care Is Multidimensional

PubMed Central

Christie, Juliette; Smith, G. Rush; Williamson, Gail M.; Lance, Charles. E.; Shovali, Tamar E.; Silva, Luciana

2010-01-01

Purpose To demonstrate that assessing quality of informal care involves more than merely determining whether care recipient needs for assistance with activities of daily living (ADLs) are satisfied on a routine basis. Potentially harmful behavior (PHB), adequate care, and exemplary care (EC) are conceptually distinct dimensions of quality of care. We investigated the extent to which these three dimensions also are empirically distinguishable. Design 237 care recipients completed the quality of care measures, and their caregivers completed psychosocial measures of depressed affect, life events, cognitive status, and perceived pre-illness relationship quality. Results Confirmatory factor analyses indicated that PHB, adequate care, and EC are empirically distinct factors. Although PHB was moderately related to EC, adequate care was not associated with PHB and was only slightly related to EC. Psychosocial variables were not related to adequate care but were differentially associated with PHB and EC, providing further evidence for the distinction between the measures of quality of care used in this study. Conclusions Assessing quality of informal care is a complex endeavor. ADL assistance can be adequate in the presence of PHB and/or the absence of EC. Declines in EC may signal increases in PHB, independent of adequacy of care. These findings produce a brief, portable, and more comprehensive instrument for assessing quality of informal care. PMID:19469607

Cloning: can it be good for us? An overview of cloning technology and its moral implications.

PubMed

FitzGerald, K

2001-01-01

Adequate answers to moral questions about cloning require a working knowledge of the science and technology involved, both present and anticipated. This essay presents an overview of the current state of somatic cell nuclear transfer technology (SCNT), the type of cloning that now permits whole organism reproduction from adult DNA. This essay explains the basic science and technology of SCNT and explores its potential uses. Next, this essay notes remaining scientific obstacles and unanswered moral questions that must be resolved before SCNT can be used for human reproduction. Attention is given to aspects related to cloning for therapeutic and research purposes.

Introduction to the report of the Asilomar 3 LDR workshop

NASA Technical Reports Server (NTRS)

1988-01-01

The Large Deployable Reflector (LDR) is a system concept for a dedicated, orbiting, submillimeter, far infrared, astronomical observatory. The purpose of the 3rd conference was to review the latest system concepts for LDR, update the science requirements, and assess the status of the technology development that was recommended at Asilomar 2. The technology development assessment included ongoing work within NASA, the DOD, and various universities. Problem areas and technologies not being adequately addressed were to be identified and prioritized. In particular, the CSTI program in Sensors and Precision Segmented Reflectors was reviewed for appropriateness and progress relative to LDR technology needs.

Total body nitrogen analysis. [neutron activation analysis

NASA Technical Reports Server (NTRS)

Palmer, H. E.

1975-01-01

Studies of two potential in vivo neutron activation methods for determining total and partial body nitrogen in animals and humans are described. A method using the CO-11 in the expired air as a measure of nitrogen content was found to be adequate for small animals such as rats, but inadequate for human measurements due to a slow excretion rate. Studies on the method of measuring the induced N-13 in the body show that with further development, this method should be adequate for measuring muscle mass changes occurring in animals or humans during space flight.

An easy tool to assess ventilation in health facilities as part of air-borne transmission prevention: a cross-sectional survey from Uganda.

PubMed

Brouwer, Miranda; Katamba, Achilles; Katabira, Elly Tebasoboke; van Leth, Frank

2017-05-03

No guidelines exist on assessing ventilation through air changes per hour (ACH) using a vaneometer. The objective of the study was to evaluate the position and frequency for measuring air velocity using a vaneometer to assess ventilation with ACH; and to assess influence of ambient temperature and weather on ACH. Cross-sectional survey in six urban health facilities in Kampala, Uganda. Measurements consisted of taking air velocity on nine separate moments in five positions in each opening of the TB clinic, laboratory, outpatient consultation and outpatient waiting room using a vaneometer. We assessed in addition the ventilation with the "20% rule", and compared this estimation with the ventilation in ACH assessed using the vaneometer. A total of 189 measurements showed no influence on air velocity of the position and moment of the measurement. No significant influence existed of ambient temperature and a small but significant influence of sunny weather. Ventilation was adequate in 17/24 (71%) of all measurements. Using the "20% rule", ventilation was adequate in 50% of rooms assessed. Agreement between both methods existed in 13/23 (56%) of the rooms assessed. Most rooms had adequate ventilation when assessed using a vaneometer for measuring air velocity. A single vaneometer measurement of air velocity is adequate to assess ventilation in this setting. These findings provide practical input for clear guidelines on assessing ventilation using a vaneometer. Assessing ventilation with a vaneometer differs substantially from applying the "20% rule".

The emulsion chamber technology experiment

NASA Technical Reports Server (NTRS)

Gregory, John C.

1992-01-01

Photographic emulsion has the unique property of recording tracks of ionizing particles with a spatial precision of 1 micron, while also being capable of deployment over detector areas of square meters or 10's of square meters. Detectors are passive, their cost to fly in Space is a fraction of that of instruments of similar collecting. A major problem in their continued use has been the labor intensiveness of data retrieval by traditional microscope methods. Two factors changing the acceptability of emulsion technology in space are the astronomical costs of flying large electronic instruments such as ionization calorimeters in Space, and the power and low cost of computers, a small revolution in the laboratory microscope data-taking. Our group at UAH made measurements of the high energy composition and spectra of cosmic rays. The Marshall group has also specialized in space radiation dosimetry. Ionization calorimeters, using alternating layers of lead and photographic emulsion, to measure particle energies up to 10(exp 15) eV were developed. Ten balloon flights were performed with them. No such calorimeters have ever flown in orbit. In the ECT program, a small emulsion chamber was developed and will be flown on the Shuttle mission OAST-2 to resolve the principal technological questions concerning space exposures. These include assessments of: (1) pre-flight and orbital exposure to background radiation, including both self-shielding and secondary particle generation; the practical limit to exposure time in space can then be determined; (2) dynamics of stack to optimize design for launch and weightlessness; and (3) thermal and vacuum constraints on emulsion performance. All these effects are cumulative and affect our ability to perform scientific measurements but cannot be adequately predicted by available methods.

Mobile Phone Interventions for Sleep Disorders and Sleep Quality: Systematic Review.

PubMed

Shin, Jong Cheol; Kim, Julia; Grigsby-Toussaint, Diana

2017-09-07

Although mobile health technologies have been developed for interventions to improve sleep disorders and sleep quality, evidence of their effectiveness remains limited. A systematic literature review was performed to determine the effectiveness of mobile technology interventions for improving sleep disorders and sleep quality. Four electronic databases (EBSCOhost, PubMed/Medline, Scopus, and Web of Science) were searched for articles on mobile technology and sleep interventions published between January 1983 and December 2016. Studies were eligible for inclusion if they met the following criteria: (1) written in English, (2) adequate details on study design, (3) focus on sleep intervention research, (4) sleep index measurement outcome provided, and (5) publication in peer-reviewed journals. An initial sample of 2679 English-language papers were retrieved from five electronic databases. After screening and review, 16 eligible studies were evaluated to examine the impact of mobile phone interventions on sleep disorders and sleep quality. These included one case study, three pre-post studies, and 12 randomized controlled trials. The studies were categorized as (1) conventional mobile phone support and (2) utilizing mobile phone apps. Based on the results of sleep outcome measurements, 88% (14/16) studies showed that mobile phone interventions have the capability to attenuate sleep disorders and to enhance sleep quality, regardless of intervention type. In addition, mobile phone intervention methods (either alternatively or as an auxiliary) provide better sleep solutions in comparison with other recognized treatments (eg, cognitive behavioral therapy for insomnia). We found evidence to support the use of mobile phone interventions to address sleep disorders and to improve sleep quality. Our findings suggest that mobile phone technologies can be effective for future sleep intervention research. ©Jong Cheol Shin, Julia Kim, Diana Grigsby-Toussaint. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 07.09.2017.

Sleep in the modern family: protective family routines for child and adolescent sleep

PubMed Central

Buxton, Orfeu M.; Chang, Anne-Marie; Spilsbury, James C.; Bos, Taylor; Emsellem, Helene; Knutson, Kristen L.

2015-01-01

Study objectives The overall objective of the 2014 National Sleep Foundation Sleep in America Poll “Sleep in the Modern Family” was to obtain a current picture of sleep in families with at least 1 school-aged child. Design Cross-sectional poll. Setting Internet-based interview. Participants Nationally representative Internet panel of US households with a child 6–17 years. Measurements and results Primary measures included parental perception of the importance of sleep, parental and child sleep quality, child sleep duration and habits, technology in bedroom, and family rules. Parents/guardians (n= 1103; mean age, 42; 54% female) completed the survey. Although the majority of parents endorsed the importance of sleep, 90% of children obtain less sleep than recommended. Significant predictors of age-adjusted sufficient sleep duration (estimated conservatively as ≥9 hours for ages 6–11 years and ≥8 hours for ages 12–17 years) included parent education, regular enforcement of rules about caffeine, and whether children left technology on in their bedroom overnight. Significant predictors of excellent sleep quality included whether a bedtime was always enforced and whether children left technology on overnight. Conclusions Children generally have better age-appropriate sleep in the presence of household rules and regular sleep-wake routines. Sufficient sleep quantity and adequate sleep quality were protected by well-established rules of sleep hygiene (limited caffeine and regular bedtime). In contrast, sleep deficiency was more likely to be present when parents and children had electronic devices on in the bedroom after bedtime. Public health intervention goals for sleep health might focus on reducing the encroachment of technology and media into time for sleep and supporting well-known sleep hygiene principles. PMID:26779564

Mobile Phone Interventions for Sleep Disorders and Sleep Quality: Systematic Review

PubMed Central

Shin, Jong Cheol; Kim, Julia

2017-01-01

Background Although mobile health technologies have been developed for interventions to improve sleep disorders and sleep quality, evidence of their effectiveness remains limited. Objective A systematic literature review was performed to determine the effectiveness of mobile technology interventions for improving sleep disorders and sleep quality. Methods Four electronic databases (EBSCOhost, PubMed/Medline, Scopus, and Web of Science) were searched for articles on mobile technology and sleep interventions published between January 1983 and December 2016. Studies were eligible for inclusion if they met the following criteria: (1) written in English, (2) adequate details on study design, (3) focus on sleep intervention research, (4) sleep index measurement outcome provided, and (5) publication in peer-reviewed journals. Results An initial sample of 2679 English-language papers were retrieved from five electronic databases. After screening and review, 16 eligible studies were evaluated to examine the impact of mobile phone interventions on sleep disorders and sleep quality. These included one case study, three pre-post studies, and 12 randomized controlled trials. The studies were categorized as (1) conventional mobile phone support and (2) utilizing mobile phone apps. Based on the results of sleep outcome measurements, 88% (14/16) studies showed that mobile phone interventions have the capability to attenuate sleep disorders and to enhance sleep quality, regardless of intervention type. In addition, mobile phone intervention methods (either alternatively or as an auxiliary) provide better sleep solutions in comparison with other recognized treatments (eg, cognitive behavioral therapy for insomnia). Conclusions We found evidence to support the use of mobile phone interventions to address sleep disorders and to improve sleep quality. Our findings suggest that mobile phone technologies can be effective for future sleep intervention research. PMID:28882808

Development of a Short-Form Measure of Science and Technology Self-efficacy Using Rasch Analysis

NASA Astrophysics Data System (ADS)

Lamb, Richard L.; Vallett, David; Annetta, Leonard

2014-10-01

Despite an increased focus on science, technology, engineering, and mathematics (STEM) in U.S. schools, today's students often struggle to maintain adequate performance in these fields compared with students in other countries (Cheek in Thinking constructively about science, technology, and society education. State University of New York, Albany, 1992; Enyedy and Goldberg 2004; Mandinach and Lewis 2006). In addition, despite considerable pressure to promote the placement of students into STEM career fields, U.S. placement is relatively low (Sadler et al. in Sci Educ 96(3):411-427, 2012; Subotnik et al. in Identifying and developing talent in science, technology, engineering, and mathematics (STEM): an agenda for research, policy and practice. International handbook, part XII, pp 1313-1326, 2009). One explanation for the decline of STEM career placement in the U.S. rests with low student affect concerning STEM concepts and related content, especially in terms of self-efficacy. Researchers define self-efficacy as the internal belief that a student can succeed in learning, and that understanding student success lies in students' externalized actions or behaviors (Bandura in Psychol Rev 84(2):191-215, 1977). Evidence suggests that high self-efficacy in STEM can result in student selection of STEM in later educational endeavors, culminating in STEM career selection (Zeldin et al. in J Res Sci Teach 45(9):1036-1058, 2007). However, other factors such as proficiency play a role as well. The lack of appropriate measures of self-efficacy can greatly affect STEM career selection due to inadequate targeting of this affective trait and loss of opportunity for early intervention by educators. Lack of early intervention decreases selection of STEM courses and careers (Valla and Williams in J Women Minor Sci Eng 18(1), 2012; Lent et al. in J Couns Psychol 38(4), 1991). Therefore, this study developed a short-form measure of self-efficacy to help identify students in need of intervention.

KNOW ESSENTIALS: a tool for informed decisions in the absence of formal HTA systems.

PubMed

Mathew, Joseph L

2011-04-01

Most developing countries and resource-limited settings lack robust health technology assessment (HTA) systems. Because the development of locally relevant HTA is not immediately viable, and the extrapolation of external HTA is inappropriate, a new model for evaluating health technologies is required. The aim of this study was to describe the development and application of KNOW ESSENTIALS, a tool facilitating evidence-based decisions on health technologies by stakeholders in settings lacking formal HTA systems. Current HTA methodology was examined through literature search. Additional issues relevant to resource-limited settings, but not adequately addressed in current methodology, were identified through further literature search, appraisal of contextually relevant issues, discussion with healthcare professionals familiar with the local context, and personal experience. A set of thirteen elements important for evidence-based decisions was identified, selected and combined into a tool with the mnemonic KNOW ESSENTIALS. Detailed definitions for each element, coding for the elements, and a system to evaluate a given health technology using the tool were developed. Developing countries and resource-limited settings face several challenges to informed decision making. Models that are relevant and applicable in high-income countries are unlikely in such settings. KNOW ESSENTIALS is an alternative that facilitates evidence-based decision making by stakeholders without formal expertise in HTA. The tool could be particularly useful, as an interim measure, in healthcare systems that are developing HTA capacity. It could also be useful anywhere when rapid evidence-based decisions on health technologies are required.

The challenges and opportunities of supersonic transport propulsion technology

NASA Technical Reports Server (NTRS)

Strack, William C.; Morris, Shelby J., Jr.

1988-01-01

The major challenges confronting the propulsion community for civil supersonic transport applications are identified: high propulsion system efficiency at both supersonic and subsonic cruise conditions, low-cost fuel with adequate thermal stability at high temperatures, low noise cycles and exhaust systems, low emission combustion systems, and low drag installations. Both past progress and future opportunities are discussed in relation to perceived technology shortfalls for an economically successful airplane that satisfies environmental constraints.

Fiber optic cryogenic sensors for superconducting magnets and superconducting power transmission lines at CERN

NASA Astrophysics Data System (ADS)

Chiuchiolo, A.; Bajko, M.; Perez, J. C.; Bajas, H.; Consales, M.; Giordano, M.; Breglio, G.; Palmieri, L.; Cusano, A.

2014-08-01

The design, fabrication and tests of a new generation of superconducting magnets for the upgrade of the LHC require the support of an adequate, robust and reliable sensing technology. The use of Fiber Optic Sensors is becoming particularly challenging for applications in extreme harsh environments such as ultra-low temperatures, high electromagnetic fields and strong mechanical stresses offering perspectives for the development of technological innovations in several applied disciplines.

Absorbed Dose Determination Using Experimental and Analytical Predictions of X-Ray Spectra

NASA Technical Reports Server (NTRS)

Edwards, D. L.; Carruth, Ralph (Technical Monitor)

2001-01-01

Electron beam welding in a vacuum is a technology that NASA is investigating as a joining technique for manufacture of space structures. This investigation characterizes the x-ray environment due to operation of an in-vacuum electron beam welding tool and provides recommendations for adequate shielding for astronauts performing the in-vacuum electron beam welding. NASA, in a joint venture with the Russian Space Agency, was scheduled to perform a series of welding in space experiments on board the U.S. Space Shuttle. This series of experiments was named the international space welding experiment (ISWE). The hardware associated with the ISWE was leased to NASA by the Paton Welding Institute (PWI) in Ukraine for ground-based welding experiments in preparation for flight. Two ground tests were scheduled, using the ISWE electron beam welding tool, to characterize the radiation exposure to an astronaut during the operation of the ISWE. These radiation exposure tests used thermoluminescence dosimeters (TLD's) shielded with material currently used by astronauts during extravehicular activities to measure the radiation dose. The TLD's were exposed to x-ray radiation generated by operation of the ISWE in-vacuum electron beam welding tool. This investigation was the first known application of TLD's to measure absorbed dose from x rays of energy less than 10 keV. The ISWE hardware was returned to Ukraine before the issue of adequate shielding for the astronauts was completely verified. Therefore, alternate experimental and analytical methods were developed to measure and predict the x-ray spectral and intensity distribution generated by ISWE electron beam impact with metal. These x-ray spectra were normalized to an equivalent ISWE exposure, then used to calculate the absorbed radiation dose to astronauts. These absorbed dose values were compared to TLD measurements obtained during actual operation of the ISWE in-vacuum electron beam welding tool. The calculated absorbed dose values were found to be in agreement with the measured TLD values.

A Procedure for Measuring Latencies in Brain-Computer Interfaces

PubMed Central

Wilson, J. Adam; Mellinger, Jürgen; Schalk, Gerwin; Williams, Justin

2011-01-01

Brain-computer interface (BCI) systems must process neural signals with consistent timing in order to support adequate system performance. Thus, it is important to have the capability to determine whether a particular BCI configuration (i.e., hardware, software) provides adequate timing performance for a particular experiment. This report presents a method of measuring and quantifying different aspects of system timing in several typical BCI experiments across a range of settings, and presents comprehensive measures of expected overall system latency for each experimental configuration. PMID:20403781

Measuring Critical Thinking in Physics: Development and Validation of a Critical Thinking Test in Electricity and Magnetism

ERIC Educational Resources Information Center

Tiruneh, Dawit Tibebu; De Cock, Mieke; Weldeslassie, Ataklti G.; Elen, Jan; Janssen, Rianne

2017-01-01

Although the development of critical thinking (CT) is a major goal of science education, adequate emphasis has not been given to the measurement of CT skills in specific science domains such as physics. Recognizing that adequately assessing CT implies the assessment of both domain-specific and domain-general CT skills, this study reports on the…

A technology demonstrator for development of ultra-lightweight, large aperture, deployable telescope for space applications

NASA Astrophysics Data System (ADS)

Zuccaro Marchi, Alessandro; Gambicorti, Lisa; Simonetti, Francesca; Salinari, Piero; Lisi, Franco; Bursi, Alessandro; Olivier, Massimiliano; Gallieni, Daniele

2017-11-01

This work presents the latest results of new technological concepts for large aperture, lightweight telescopes using thin deployable active mirrors. The study is originally addressed to a spaceborne DIAL (Differential Absorption Lidar) at 935.5 nm for the measurement of water vapour profile in atmosphere, as an output of an ESA contract (whose preliminary results were presented at ICSO 2006). The high versatility of these concepts allows to exploit the presented technology for any project willing to consider large aperture, segmented lightweight telescopes. A possible scientific application is for Ultra High Energy Cosmic Rays detection through the fluorescence traces in atmosphere and diffused Cerenkov signals observation via a Schmidt-like spaceborne LEO telescope with large aperture, wide Field of View (FOV) and low f/#. A technology demonstrator has been manufactured and tested in order to investigate two project critical areas identified during the preliminary design: the performances of the long-stroke actuators used to implement the mirror active control and the mirror survivability to launch. In particular, this breadboard demonstrates at first that the mirror actuators are able to control with the adequate accuracy the surface shape and to recover a deployment error with their long stroke; secondly, the mirror survivability has been demonstrated using an electrostatic locking between mirror and backplane able to withstand without failure a vibration test representative of the launch environment.

When systems fail: improving care through technology can create risk.

PubMed

Bagalio, Sharon A

2007-01-01

Emerging medical technology is transforming the care of the modern-day patient. Hospital performance and patient safety is improving, lowering professional liability and medical malpractice costs. This advanced technology affects not only diagnosis and treatment but also hospital productivity and revenue. However, it also exposes hospitals and medical personnel to a number of unforeseeable risks. This article examines ongoing efforts to improve patient safety through the use of technology, automation and complex systems operations. It discusses the importance of skilled negotiation when vying for technology contracts and the value of maintaining a reliable data center to support it. Technology risk exposure is now a reality. A hospital needs to know how to protect itself from cyber liability, business interruption, and data loss and theft by ensuring that there is adequate coverage.

Improving Nigerian health policymakers' capacity to access and utilize policy relevant evidence: outcome of information and communication technology training workshop.

PubMed

Uneke, Chigozie Jesse; Ezeoha, Abel Ebeh; Uro-Chukwu, Henry; Ezeonu, Chinonyelum Thecla; Ogbu, Ogbonnaya; Onwe, Friday; Edoga, Chima

2015-01-01

Information and communication technology (ICT) tools are known to facilitate communication and processing of information and sharing of knowledge by electronic means. In Nigeria, the lack of adequate capacity on the use of ICT by health sector policymakers constitutes a major impediment to the uptake of research evidence into the policymaking process. The objective of this study was to improve the knowledge and capacity of policymakers to access and utilize policy relevant evidence. A modified "before and after" intervention study design was used in which outcomes were measured on the target participants both before the intervention is implemented and after. A 4-point likert scale according to the degree of adequacy; 1 = grossly inadequate, 4 = very adequate was employed. This study was conducted in Ebonyi State, south-eastern Nigeria and the participants were career health policy makers. A two-day intensive ICT training workshop was organized for policymakers who had 52 participants in attendance. Topics covered included: (i). intersectoral partnership/collaboration; (ii). Engaging ICT in evidence-informed policy making; use of ICT for evidence synthesis; (iv) capacity development on the use of computer, internet and other ICT. The pre-workshop mean of knowledge and capacity for use of ICT ranged from 2.19-3.05, while the post-workshop mean ranged from 2.67-3.67 on 4-point scale. The percentage increase in mean of knowledge and capacity at the end of the workshop ranged from 8.3%-39.1%. Findings of this study suggest that policymakers' ICT competence relevant to evidence-informed policymaking can be enhanced through training workshop.

Improving Nigerian health policymakers’ capacity to access and utilize policy relevant evidence: outcome of information and communication technology training workshop

PubMed Central

Uneke, Chigozie Jesse; Ezeoha, Abel Ebeh; Uro-Chukwu, Henry; Ezeonu, Chinonyelum Thecla; Ogbu, Ogbonnaya; Onwe, Friday; Edoga, Chima

2015-01-01

Information and communication technology (ICT) tools are known to facilitate communication and processing of information and sharing of knowledge by electronic means. In Nigeria, the lack of adequate capacity on the use of ICT by health sector policymakers constitutes a major impediment to the uptake of research evidence into the policymaking process. The objective of this study was to improve the knowledge and capacity of policymakers to access and utilize policy relevant evidence. A modified “before and after” intervention study design was used in which outcomes were measured on the target participants both before the intervention is implemented and after. A 4-point likert scale according to the degree of adequacy; 1 = grossly inadequate, 4 = very adequate was employed. This study was conducted in Ebonyi State, south-eastern Nigeria and the participants were career health policy makers. A two-day intensive ICT training workshop was organized for policymakers who had 52 participants in attendance. Topics covered included: (i). intersectoral partnership/collaboration; (ii). Engaging ICT in evidence-informed policy making; use of ICT for evidence synthesis; (iv) capacity development on the use of computer, internet and other ICT. The pre-workshop mean of knowledge and capacity for use of ICT ranged from 2.19-3.05, while the post-workshop mean ranged from 2.67-3.67 on 4-point scale. The percentage increase in mean of knowledge and capacity at the end of the workshop ranged from 8.3%-39.1%. Findings of this study suggest that policymakers’ ICT competence relevant to evidence-informed policymaking can be enhanced through training workshop. PMID:26448807

Critical thinking traits of top-tier experts and implications for computer science education

NASA Astrophysics Data System (ADS)

Bushey, Dean E.

A documented shortage of technical leadership and top-tier performers in computer science jeopardizes the technological edge, security, and economic well-being of the nation. The 2005 President's Information and Technology Advisory Committee (PITAC) Report on competitiveness in computational sciences highlights the major impact of science, technology, and innovation in keeping America competitive in the global marketplace. It stresses the fact that the supply of science, technology, and engineering experts is at the core of America's technological edge, national competitiveness and security. However, recent data shows that both undergraduate and postgraduate production of computer scientists is falling. The decline is "a quiet crisis building in the United States," a crisis that, if allowed to continue unchecked, could endanger America's well-being and preeminence among the world's nations. Past research on expert performance has shown that the cognitive traits of critical thinking, creativity, and problem solving possessed by top-tier performers can be identified, observed and measured. The studies show that the identified attributes are applicable across many domains and disciplines. Companies have begun to realize that cognitive skills are important for high-level performance and are reevaluating the traditional academic standards they have used to predict success for their top-tier performers in computer science. Previous research in the computer science field has focused either on programming skills of its experts or has attempted to predict the academic success of students at the undergraduate level. This study, on the other hand, examines the critical-thinking skills found among experts in the computer science field in order to explore the questions, "What cognitive skills do outstanding performers possess that make them successful?" and "How do currently used measures of academic performance correlate to critical-thinking skills among students?" The results of this study suggest a need to examine how critical-thinking abilities are learned in the undergraduate computer science curriculum and the need to foster these abilities in order to produce the high-level, critical-thinking professionals necessary to fill the growing need for these experts. Due to the fact that current measures of academic performance do not adequately depict students' cognitive abilities, assessment of these skills must be incorporated into existing curricula.

49 CFR 1104.3 - Copies.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Microsoft Open Database Connectivity (ODBC) standard. ODBC is a Windows technology that allows a database software package to import data from a database created using a different software package. We currently...-compatible format. All databases must be supported with adequate documentation on data attributes, SQL...

Smoke Detector Technology.

ERIC Educational Resources Information Center

Powell, Pamela, Ed.; Portugill, Jestyn, Ed.

This manual, one in a series developed for public education, provides information on smoke detector selection, installation, operation, and maintenance. For the prospective buyer, the importance of looking for the seal of a recognized national testing laboratory--such as Underwriters' Laboratories, Inc. (UL)--indicating adequate laboratory testing…

Cyber Security--Are You Prepared?

ERIC Educational Resources Information Center

Newman, Scott

2007-01-01

During the summer 2002 term, Oklahoma State University-Okmulgee's Information Technologies Division offered a one credit-hour network security course--which barely had adequate student interest to meet the institution's enrollment requirements. Today, OSU-Okmulgee boasts one of the nation's premier cyber security programs. Many prospective…

NASA - Johnson Space Center's New Capabilities for Air Purification

NASA Technical Reports Server (NTRS)

Graf, John

2015-01-01

NASA has some unique and challenging air purification problems that cannot be adequately met with COTS technology: 1) ammonia removal from air, 2) hydrazine removal from air, 3) CO conversion to CO2 in low temperature, high humidity environments. NASA has sponsored the development of new sorbents and new catalysts. These new sorbents and catalysts work better than COTS technology for our application. If attendees have a need for an effective ammonia sorbent, an effective hydrazine sorbent, or an effective CO conversion catalyst, we should learn to see if NASA sponsored technology development can help.

Transferring technology to the public sector.

NASA Technical Reports Server (NTRS)

Alper, M. E.

1972-01-01

Approximately four years ago the Jet Propulsion Laboratory, under NASA sponsorship, began to devote some of its resources to examining ways to transfer space technology to the civil sector. As experience accumulated under this program, certain principles basic to success in technology transfer became apparent. An adequate definition of each problem must be developed before any substantial effort is expended on a solution. In most instances, a source of funds other than the potential user is required to support the problem definition phase of the work. Sensitivity to the user's concerns and effective interpersonal communications between the user and technical personnel are essential to success.

Development of 3D out-of-plane SU-8 microlenses using modified micromolding in capillaries (MIMIC) technology

NASA Astrophysics Data System (ADS)

Llobera, A.; Wilke, R.; Johnson, D. W.; Büttgenbach, S.

2006-04-01

This paper describes a modification of the standard MIMIC technology, solving its main drawbacks, to define arrays of spherical or ellipsoidal microlenses. Perfectly symmetrical meniscuses have been obtained by using a XP SU-8 NO-2 layer beneath the PDMS mold. Moreover, the photostructurable properties of this polymer allow obtaining self-alignment structures for adequate fiber optics positioning. Microchannels ended with these meniscuses have been filled with standard SU-8 to obtain 3D microlenses. Agreement between theory and experimental results allows confirming the validity of the proposed technology.

Quality of glucose measurement with blood glucose meters at the point-of-care: relevance of interfering factors.

PubMed

Heinemann, Lutz

2010-11-01

A good understanding of the relevance of interfering factors having an impact on blood glucose (BG) measurement is needed to obtain the required quality. This depends on the application in which meters designed for self-monitoring of BG (SMBG) are used. By means of a literature search all publications (from January 1, 1980 to August 10, 2009) were identified that report about the influence of potentially interfering substances/factors on the measurement quality of BG meters. Certain substances (e.g., maltose) can have a profound and misleading impact on the BG measurement result when the enzymatic reaction embedded on the given test strips cross-reacts. Also, a number of other drugs (e.g., acetaminophen) and factors (like temperature and altitude) affect the reliability of BG measurement massively. However, the susceptibility of the BG meter (depending on the enzyme technology of the test strips) differs significantly. In daily practice the factors that have a relevant impact on the reliability of BG measurements with modern BG meters are rarely met. Clearly this also depends on the intended use (SMBG in patient hands vs. point-of-care testing in hospitals). To avoid misleading measurement results requires adequate training of all people involved.

Is my bottom-up uncertainty estimation on metal measurement adequate?

NASA Astrophysics Data System (ADS)

Marques, J. R.; Faustino, M. G.; Monteiro, L. R.; Ulrich, J. C.; Pires, M. A. F.; Cotrim, M. E. B.

2018-03-01

Is the estimated uncertainty under GUM recommendation associated with metal measurement adequately estimated? How to evaluate if the measurement uncertainty really covers all uncertainty that is associated with the analytical procedure? Considering that, many laboratories frequently underestimate or less frequently overestimate uncertainties on its results; this paper presents the evaluation of estimated uncertainties on two ICP-OES procedures of seven metal measurements according to GUM approach. Horwitz function and proficiency tests scaled standard uncertainties were used in this evaluation. Our data shows that most elements expanded uncertainties were from two to four times underestimated. Possible causes and corrections are discussed herein.

Development of a measure of knowledge use by stakeholders in rehabilitation technology

PubMed Central

Nobrega, Amanda R; Lane, Joseph P; Tomita, Machiko R; Usiak, Douglas J; Lockett, Michelle M

2014-01-01

Objectives: Uptake of new knowledge by diverse and diffuse stakeholders of health-care technology innovations has been a persistent challenge, as has been measurement of this uptake. This article describes the development of the Level of Knowledge Use Survey instrument, a web-based measure of self-reported knowledge use. Methods: The Level of Knowledge Use Survey instrument was developed in the context of assessing effectiveness of knowledge communication strategies in rehabilitation technology. It was validated on samples representing five stakeholder types: researchers, manufacturers, clinician–practitioners, knowledge brokers, and consumers. Its structure is broadly based on Rogers’ stages of innovation adoption. Its item generation was initially guided by Hall et al’s Levels of Use framework. Item selection was based on content validity indices computed from expert ratings (n 1 = 4; n 2 = 3). Five representative stakeholders established usability of the web version. The version included 47 items (content validity index for individual items >0.78; content validity index for a scale or set of items >0.90) in self-reporting format. Psychometrics were then established for the version. Results: Analyses of data from small (n = 69) and large (n = 215) samples using the Level of Knowledge Use Survey instrument suggested a conceptual model of four levels of knowledge use—Non-awareness, Awareness, Interest, and Use. The levels covered eight dimensions and six user action categories. The sequential nature of levels was inconclusive due to low cell frequencies. The Level of Knowledge Use Survey instrument showed adequate content validity (≈ 0.88; n = 3) and excellent test–retest reliability (1.0; n = 69). It also demonstrated good construct validity (n = 215) for differentiating among new knowledge outputs (p < 0.001) and among stakeholder types (0.001 < p ≤ 0.013). It showed strong responsiveness to change between baseline and follow-up testing (0.001 < p ≤ 0.002; n = 215). Conclusion: The Level of Knowledge Use Survey instrument is valid and reliable for measuring uptake of innovations across diffuse stakeholders of rehabilitation technologies and therefore also for tracking changes in knowledge use. PMID:26770743

Proceedings of the Technology Transfer Seminar/Workshop on the Application of Pollution Abatement Technology to Local Governments

DTIC Science & Technology

1975-05-01

civil agencies through interage..:y agreements. One of the Navy field activities, the Naval Ammunition Depot at Crane , Indiana, has developed rather...chemical mixing compartment and chem- ical dosing tank assures adequate contact time. Solids and organics are hydrolyzed by the caustic , while the...The high caustic level of the treated waste water resulted in corrosion to various points in the system. Pumps required extensive weekly maintenance

Aspects of intelligent electronic device based switchgear control training model application

NASA Astrophysics Data System (ADS)

Bogdanov, Dimitar; Popov, Ivaylo

2018-02-01

The design of the protection and control equipment for electrical power sector application was object of extensive advance in the last several decades. The modern technologies offer a wide range of multifunctional flexible applications, making the protection and control of facilities more sophisticated. In the same time, the advance of technology imposes the necessity of simulators, training models and tutorial laboratory equipment to be used for adequate training of students and field specialists

Laser-Powered Thrusters for High Efficiency Variable Specific Impulse Missions (Preprint)

DTIC Science & Technology

2007-04-10

technology. However, a laser-ablation propulsion engine using a set of diode-pumped glass fiber amplifiers with a total of 350-W optical power can...in a single device using low-mass diode-pumped glass fiber laser amplifiers to operate in either long- or short-pulse regimes at will. Adequate fiber...pulsewidth glass fiber oscillator-amplifiers, rather than the diodes used in the µ LPT, to achieve Table 2. Demonstrated technology basis Ablation Fuel Gold

Analysis of estimation of electromagnetic dosimetric values from non-ionizing radiofrequency fields in conventional road vehicle environments.

PubMed

Aguirre, Erik; Iturri, Peio Lopez; Azpilicueta, Leire; de Miguel-Bilbao, Silvia; Ramos, Victoria; Gárate, Uxue; Falcone, Francisco

2015-03-01

A high number of wireless technologies can be found operating in vehicular environments with the aim of offering different services. The dosimetric evaluation of this kind of scenarios must be performed in order to assess their compatibility with current exposure limits. In this work, a dosimetric evaluation inside a conventional car is performed, with the aid of an in-house 3D Ray Launching computational code, which has been compared with measurement results of wireless sensor networks located inside the vehicle. These results can aid in an adequate assessment of human exposure to non-ionizing radiofrequency fields, taking into account the impact of the morphology and the topology of the vehicle for current as well as for future exposure limits.

IoT based mobile health hub

NASA Astrophysics Data System (ADS)

Thomas, Diljo; Vineeth, V. L.; Siddharth, P. G.; Shanmugasundaram, M.

2017-11-01

Technological innovations have a great influence on bio medical field. Even in this advanced era people are struggling due to lack of medical attention or delay in arranging adequate health care. Most of the hospitals have emergency vehicle facility and they are successful in providing emergency response to the needy patient. But the delay in arranging medical attention in hospital is still a big issue. One solution to the above problem is to provide a channel of communication between the emergency vehicle and hospital such that the patient information along with the vitals can be made available to the hospital prior to the arrival of emergency vehicle. This paper proposes such a system where the patient information and vitals are measured and uploaded to a cloud facility. This information helps the doctor to arrange quick medical response.

Engineering management and innovation

NASA Technical Reports Server (NTRS)

Graham, R. W.

1980-01-01

Although improved management methods can enhance the performance of some enterprises, they can lower that of research organizations. The prevalent use of cost-effectiveness criteria as a management tool overvalues identifiable short-term accomplishment at the expense of long-term research efforts, which often serve as the antecedents upon which a new, seemingly unrelated technology is later founded. Medical instruments used in the treatment of emphysema, for example, evolved from NASA-sponsored research devoted to the measurement of the composition of the atmospheres of the planets. The best manager is the manager who creates an environment that enables his research engineers to pursue ideas with a minimum of interference. Such an environment consists of broad research objectives, adequate facilities, and proper technical support. Within a framework of prudent spending, the manager's aim is to cultivate innovation.

Improvements of the two-dimensional FDTD method for the simulation of normal- and superconducting planar waveguides using time series analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hofschen, S.; Wolff, I.

1996-08-01

Time-domain simulation results of two-dimensional (2-D) planar waveguide finite-difference time-domain (FDTD) analysis are normally analyzed using Fourier transform. The introduced method of time series analysis to extract propagation and attenuation constants reduces the desired computation time drastically. Additionally, a nonequidistant discretization together with an adequate excitation technique is used to reduce the number of spatial grid points. Therefore, it is possible to reduce the number of spatial grid points. Therefore, it is possible to simulate normal- and superconducting planar waveguide structures with very thin conductors and small dimensions, as they are used in MMIC technology. The simulation results are comparedmore » with measurements and show good agreement.« less

Security in perspective; luxury or must?

PubMed

Bakker, A

1998-03-01

In this paper, security in health information systems is put into perspective. The further penetration of information technology into health care is discussed and it is concluded that information systems have already become a vital component, not only for the logistics of the health care institution but also for the rendering of care and cure. Health care depends heavily on adequate data, so availability and integrity are equally important. In view of the sensitive nature of many patient data, the importance of confidentiality was recognised long before computers were invented. For widespread use of IT in health care it is of vital importance that computers can be trusted in respect of confidentiality. This paper emphasises the need to pay attention to security and suggests a responsible approach with implementation of both technical and organisational measures.

Health Literacy and Health Information Technology Adoption: The Potential for a New Digital Divide.

PubMed

Mackert, Michael; Mabry-Flynn, Amanda; Champlin, Sara; Donovan, Erin E; Pounders, Kathrynn

2016-10-04

Approximately one-half of American adults exhibit low health literacy and thus struggle to find and use health information. Low health literacy is associated with negative outcomes including overall poorer health. Health information technology (HIT) makes health information available directly to patients through electronic tools including patient portals, wearable technology, and mobile apps. The direct availability of this information to patients, however, may be complicated by misunderstanding of HIT privacy and information sharing. The purpose of this study was to determine whether health literacy is associated with patients' use of four types of HIT tools: fitness and nutrition apps, activity trackers, and patient portals. Additionally, we sought to explore whether health literacy is associated with patients' perceived ease of use and usefulness of these HIT tools, as well as patients' perceptions of privacy offered by HIT tools and trust in government, media, technology companies, and health care. This study is the first wide-scale investigation of these interrelated concepts. Participants were 4974 American adults (n=2102, 42.26% male, n=3146, 63.25% white, average age 43.5, SD 16.7 years). Participants completed the Newest Vital Sign measure of health literacy and indicated their actual use of HIT tools, as well as the perceived ease of use and usefulness of these applications. Participants also answered questions regarding information privacy and institutional trust, as well as demographic items. Cross-tabulation analysis indicated that adequate versus less than adequate health literacy was significantly associated with use of fitness apps (P=.02), nutrition apps (P<.001), activity trackers (P<.001), and patient portals (P<.001). Additionally, greater health literacy was significantly associated with greater perceived ease of use and perceived usefulness across all HIT tools after controlling for demographics. Regarding privacy perceptions of HIT and institutional trust, patients with greater health literacy often demonstrated decreased privacy perceptions for HIT tools including fitness apps (P<.001) and nutrition apps (P<.001). Health literacy was negatively associated with trust in government (P<.001), media (P<.001), and technology companies (P<.001). Interestingly, health literacy score was positively associated with trust in health care (P=.03). Patients with low health literacy were less likely to use HIT tools or perceive them as easy or useful, but they perceived information on HIT as private. Given the fast-paced evolution of technology, there is a pressing need to further the understanding of how health literacy is related to HIT app adoption and usage. This will ensure that all users receive the full health benefits from these technological advances, in a manner that protects health information privacy, and that users engage with organizations and providers they trust.

Health Literacy and Health Information Technology Adoption: The Potential for a New Digital Divide

PubMed Central

Mabry-Flynn, Amanda; Champlin, Sara; Donovan, Erin E; Pounders, Kathrynn

2016-01-01

Background Approximately one-half of American adults exhibit low health literacy and thus struggle to find and use health information. Low health literacy is associated with negative outcomes including overall poorer health. Health information technology (HIT) makes health information available directly to patients through electronic tools including patient portals, wearable technology, and mobile apps. The direct availability of this information to patients, however, may be complicated by misunderstanding of HIT privacy and information sharing. Objective The purpose of this study was to determine whether health literacy is associated with patients’ use of four types of HIT tools: fitness and nutrition apps, activity trackers, and patient portals. Additionally, we sought to explore whether health literacy is associated with patients’ perceived ease of use and usefulness of these HIT tools, as well as patients’ perceptions of privacy offered by HIT tools and trust in government, media, technology companies, and health care. This study is the first wide-scale investigation of these interrelated concepts. Methods Participants were 4974 American adults (n=2102, 42.26% male, n=3146, 63.25% white, average age 43.5, SD 16.7 years). Participants completed the Newest Vital Sign measure of health literacy and indicated their actual use of HIT tools, as well as the perceived ease of use and usefulness of these applications. Participants also answered questions regarding information privacy and institutional trust, as well as demographic items. Results Cross-tabulation analysis indicated that adequate versus less than adequate health literacy was significantly associated with use of fitness apps (P=.02), nutrition apps (P<.001), activity trackers (P<.001), and patient portals (P<.001). Additionally, greater health literacy was significantly associated with greater perceived ease of use and perceived usefulness across all HIT tools after controlling for demographics. Regarding privacy perceptions of HIT and institutional trust, patients with greater health literacy often demonstrated decreased privacy perceptions for HIT tools including fitness apps (P<.001) and nutrition apps (P<.001). Health literacy was negatively associated with trust in government (P<.001), media (P<.001), and technology companies (P<.001). Interestingly, health literacy score was positively associated with trust in health care (P=.03). Conclusions Patients with low health literacy were less likely to use HIT tools or perceive them as easy or useful, but they perceived information on HIT as private. Given the fast-paced evolution of technology, there is a pressing need to further the understanding of how health literacy is related to HIT app adoption and usage. This will ensure that all users receive the full health benefits from these technological advances, in a manner that protects health information privacy, and that users engage with organizations and providers they trust. PMID:27702738

Optical Fiber-Based MR-Compatible Sensors for Medical Applications: An Overview

PubMed Central

Taffoni, Fabrizio; Formica, Domenico; Saccomandi, Paola; Di Pino, Giovanni; Schena, Emiliano

2013-01-01

During last decades, Magnetic Resonance (MR)—compatible sensors based on different techniques have been developed due to growing demand for application in medicine. There are several technological solutions to design MR-compatible sensors, among them, the one based on optical fibers presents several attractive features. The high elasticity and small size allow designing miniaturized fiber optic sensors (FOS) with metrological characteristics (e.g., accuracy, sensitivity, zero drift, and frequency response) adequate for most common medical applications; the immunity from electromagnetic interference and the absence of electrical connection to the patient make FOS suitable to be used in high electromagnetic field and intrinsically safer than conventional technologies. These two features further heightened the potential role of FOS in medicine making them especially attractive for application in MRI. This paper provides an overview of MR-compatible FOS, focusing on the sensors employed for measuring physical parameters in medicine (i.e., temperature, force, torque, strain, and position). The working principles of the most promising FOS are reviewed in terms of their relevant advantages and disadvantages, together with their applications in medicine. PMID:24145918

Combustion Sensors: Gas Turbine Applications

NASA Technical Reports Server (NTRS)

Human, Mel

2002-01-01

This report documents efforts to survey the current research directions in sensor technology for gas turbine systems. The work is driven by the current and future requirements on system performance and optimization. Accurate real time measurements of velocities, pressure, temperatures, and species concentrations will be required for objectives such as combustion instability attenuation, pollutant reduction, engine health management, exhaust profile control via active control, etc. Changing combustor conditions - engine aging, flow path slagging, or rapid maneuvering - will require adaptive responses; the effectiveness of such will be only as good as the dynamic information available for processing. All of these issues point toward the importance of continued sensor development. For adequate control of the combustion process, sensor data must include information about the above mentioned quantities along with equivalence ratios and radical concentrations, and also include both temporal and spatial velocity resolution. Ultimately these devices must transfer from the laboratory to field installations, and thus must become low weight and cost, reliable and maintainable. A primary conclusion from this study is that the optics-based sensor science will be the primary diagnostic in future gas turbine technologies.

Integrating a piezoelectric actuator with mechanical and hydraulic devices to control camless engines

NASA Astrophysics Data System (ADS)

Mercorelli, Paolo; Werner, Nils

2016-10-01

The paper deals with some interdisciplinary aspects and problems concerning the actuation control which occur in the integration of a piezoelectric structure in an aggregate actuator consisting of a piezoelectric, a stroke ratio displacement, a mechanical and a hydraulic part. Problems like compensation of the piezo hysteresis effect, scaling force-position to obtain an adequate displacement of the actuator and finally the control of such a complex aggregate system are considered and solved. Even though this work considers a particular application, the solutions proposed in the paper are quite general. In fact, the considered technical aspects occurring in systems which utilize piezoelectric technologies can be used in a variegated gamma of actuators integrating piezoelectric technologies. A cascade controller is proposed to combine a Feedforward action with an internal and an external PI-Controller. The Feedforward Controller is based on the model of the whole actuator, so particular attention is paid to the model structure. The resulting Feedforward action is an adaptive one to compensate hydraulic pressure faults. Real measurements are shown.

Developing a validation for environmental sustainability

NASA Astrophysics Data System (ADS)

Adewale, Bamgbade Jibril; Mohammed, Kamaruddeen Ahmed; Nawi, Mohd Nasrun Mohd; Aziz, Zulkifli

2016-08-01

One of the agendas for addressing environmental protection in construction is to reduce impacts and make the construction activities more sustainable. This important consideration has generated several research interests within the construction industry, especially considering the construction damaging effects on the ecosystem, such as various forms of environmental pollution, resource depletion and biodiversity loss on a global scale. Using Partial Least Squares-Structural Equation Modeling technique, this study validates environmental sustainability (ES) construct in the context of large construction firms in Malaysia. A cross-sectional survey was carried out where data was collected from Malaysian large construction firms using a structured questionnaire. Results of this study revealed that business innovativeness and new technology are important in determining environmental sustainability (ES) of the Malaysian construction firms. It also established an adequate level of internal consistency reliability, convergent validity and discriminant validity for each of this study's constructs. And based on this result, it could be suggested that the indicators for organisational innovativeness dimensions (business innovativeness and new technology) are useful to measure these constructs in order to study construction firms' tendency to adopt environmental sustainability (ES) in their project execution.

Application of Video Image Correlation Techniques to the Space Shuttle External Tank Foam Materials

NASA Technical Reports Server (NTRS)

Hilburger, Mark W.; Nemeth, Michael P.

2005-01-01

Results that illustrate the use of a video-image-correlation-based displacement and strain measurement system to assess the effects of material nonuniformities on the behavior of the sprayed-on foam insulation (SOFI) used for the thermal protection system on the Space Shuttle External Tank are presented. Standard structural verification specimens for the SOFI material with and without cracks and subjected to mechanical or thermal loading conditions were tested. Measured full-field displacements and strains are presented for selected loading conditions to illustrate the behavior of the foam and the viability of the measurement technology. The results indicate that significant strain localization can occur in the foam because of material nonuniformities. In particular, elongated cells in the foam can interact with other geometric or material discontinuities in the foam and develop large-magnitude localized strain concentrations that likely initiate failures. Furthermore, some of the results suggest that continuum mechanics and linear elastic fracture mechanics might not adequately represent the physical behavior of the foam, and failure predictions based on homogeneous linear material models are likely to be inadequate.

Application of Video Image Correlation Techniques to the Space Shuttle External Tank Foam Materials

NASA Technical Reports Server (NTRS)

Hilburger, Mark W.; Nemeth, Michael P.

2006-01-01

Results that illustrate the use of a video-image-correlation-based displacement and strain measurement system to assess the effects of material nonuniformities on the behavior of the sprayed-on foam insulation (SOFI) used for the thermal protection system on the Space Shuttle External Tank are presented. Standard structural verification specimens for the SOFI material with and without cracks and subjected to mechanical or thermal loading conditions were tested. Measured full-field displacements and strains are presented for selected loading conditions to illustrate the behavior of the foam and the viability of the measurement technology. The results indicate that significant strain localization can occur in the foam because of material nonuniformities. In particular, elongated cells in the foam can interact with other geometric or material discontinuities in the foam and develop large-magnitude localized strain concentrations that likely initiate failures. Furthermore, some of the results suggest that continuum mechanics and linear elastic fracture mechanics might not adequately represent the physical behavior of the foam, and failure predictions based on homogeneous linear material models are likely to be inadequate.

Speed scanning system based on solid-state microchip laser for architectural planning

NASA Astrophysics Data System (ADS)

Redka, Dmitriy; Grishkanich, Alexsandr S.; Kolmakov, Egor; Tsvetkov, Konstantin

2017-10-01

According to the current great interest concerning Large-Scale Metrology applications in many different fields of manufacturing industry, technologies and techniques for dimensional measurement have recently shown a substantial improvement. Ease-of-use, logistic and economic issues, as well as metrological performance, are assuming a more and more important role among system requirements. The project is planned to conduct experimental studies aimed at identifying the impact of the application of the basic laws of microlasers as radiators on the linear-angular characteristics of existing measurement systems. The project is planned to conduct experimental studies aimed at identifying the impact of the application of the basic laws of microlasers as radiators on the linear-angular characteristics of existing measurement systems. The system consists of a distributed network-based layout, whose modularity allows to fit differently sized and shaped working volumes by adequately increasing the number of sensing units. Differently from existing spatially distributed metrological instruments, the remote sensor devices are intended to provide embedded data elaboration capabilities, in order to share the overall computational load.

Beam-dynamic effects at the CMS BRIL van der Meer scans

NASA Astrophysics Data System (ADS)

Babaev, A.

2018-03-01

The CMS Beam Radiation Instrumentation and Luminosity Project (BRIL) is responsible for the simulation and measurement of luminosity, beam conditions and radiation fields in the CMS experiment. The project is engaged in operating and developing new detectors (luminometers), adequate for the experimental conditions associated with high values of instantaneous luminosity delivered by the CERN LHC . BRIL operates several detectors based on different physical principles and technologies. Precise and accurate measurements of the delivered luminosity is of paramount importance for the CMS physics program. The absolute calibration of luminosity is achieved by the van der Meer method, which is carried out under specially tailored conditions. This paper presents models used to simulate of beam-dynamic effects arising due to the electromagnetic interaction of colliding bunches. These effects include beam-beam deflection and dynamic-β effect. Both effects are important to luminosity measurements and influence calibration constants at the level of 1-2%. The simulations are carried out based on 2016 CMS van der Meer scan data for proton-proton collisions at a center-of-mass energy of 13 TeV.

Assessing Microneurosurgical Skill with Medico-Engineering Technology.

PubMed

Harada, Kanako; Morita, Akio; Minakawa, Yoshiaki; Baek, Young Min; Sora, Shigeo; Sugita, Naohiko; Kimura, Toshikazu; Tanikawa, Rokuya; Ishikawa, Tatsuya; Mitsuishi, Mamoru

2015-10-01

Most methods currently used to assess surgical skill are rather subjective or not adequate for microneurosurgery. Objective and quantitative microneurosurgical skill assessment systems that are capable of accurate measurements are necessary for the further development of microneurosurgery. Infrared optical motion tracking markers, an inertial measurement unit, and strain gauges were mounted on tweezers to measure many parameters related to instrument manipulation. We then recorded the activity of 23 neurosurgeons. The task completion time, tool path, and needle-gripping force were evaluated for three stitches made in an anastomosis of 0.7-mm artificial blood vessels. Videos of the activity were evaluated by three blinded expert surgeons. Surgeons who had recently done many bypass procedures demonstrated better skills. These skilled surgeons performed the anastomosis with in a shorter time, with a shorter tool path, and with a lesser force when extracting the needle. These results show the potential contribution of the system to microsurgical skill assessment. Quantitative and detailed analysis of surgical tasks helps surgeons better understand the key features of the required skills. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Assessment of Heparin Anticoagulation Measured Using i-STAT and Hemochron Activated Clotting Time.

PubMed

Maslow, Andrew; Chambers, Alison; Cheves, Tracey; Sweeney, Joseph

2018-01-31

Adequate anticoagulation, measured using activated clotting time (ACT), is important during vascular and cardiac surgeries. Unfractionated heparin is the most common anticoagulant used. The purpose of this analysis was to compare the i-STAT ACT (iACT) to the Hemochron ACT (hACT), both of which were then compared to anti-factor Xa (anti-Xa) assay, a representation of heparin level and activity. Prospective study. Tertiary care cardiovascular center. Eleven consecutive elective adult cardiac surgical patients. Prior to cardiopulmonary bypass, ACTs were measured using i-STAT and Hemochron technologies and compared to each other and to anti-Xa assay prior to and during a cumulative administration of heparin. Data were compared using bias analyses. Heparin (300 U/kg) was administered in quarterly doses. Coagulation labs were collected prior to and 3 minutes after each quarterly dose of heparin. The baseline ACTs for i-STAT and Hemochron were 147 and 142 seconds, respectively. A significant association was found between iACT and hACT (p = 0.002). The iACT measurements underestimated hACT at ACT levels >180 seconds or anti-Xa levels >0.75 U/mL. No significant difference was found between ACT data at anti-Xa levels <0.5 U/mL. There was a good association between the iACT and hACT; however, the 2 tests are not equivalent. Overall, the iACT underestimated the hACT. Agreement between the ACT technologies was good at lower ACTs and anti-Xa levels, but declined with an anti-Xa >0.75 U/mL. Copyright © 2018 Elsevier Inc. All rights reserved.

Antimisting kerosene: Base fuel effects, blending and quality control techniques

NASA Technical Reports Server (NTRS)

Yavrouian, A. H.; Ernest, J.; Sarohia, V.

1984-01-01

The problems associated with blending of the AMK additive with Jet A, and the base fuel effects on AMK properties are addressed. The results from the evaluation of some of the quality control techniques for AMK are presented. The principal conclusions of this investigation are: significant compositional differences for base fuel (Jet A) within the ASTM specification DI655; higher aromatic content of the base fuel was found to be beneficial for the polymer dissolution at ambient (20 C) temperature; using static mixer technology, the antimisting additive (FM-9) is in-line blended with Jet A, producing AMK which has adequate fire-protection properties 15 to 20 minutes after blending; degradability of freshly blended and equilibrated AMK indicated that maximum degradability is reached after adequate fire protection is obtained; the results of AMK degradability as measured by filter ratio, confirmed previous RAE data that power requirements to decade freshly blended AMK are significantly higher than equilibrated AMK; blending of the additive by using FM-9 concentrate in Jet A produces equilibrated AMK almost instantly; nephelometry offers a simple continuous monitoring capability and is used as a real time quality control device for AMK; and trajectory (jet thurst) and pressure drop tests are useful laboratory techniques for evaluating AMK quality.

In-space technology development: Atomic oxygen and orbital debris effects

NASA Technical Reports Server (NTRS)

Visentine, James T.; Potter, Andrew E., Jr.

1989-01-01

Earlier Shuttle flight experiments have shown atomic oxygen within the orbital environment can interact with many materials to produce surface recession and mass loss and combine catalytically with other constituents to generate visible and infrared glows. In addition to these effects, examinations of returned satellite hardware have shown many spacecraft materials are also susceptible to damage from high velocity impacts with orbital space debris. These effects are of particular concern for large, multi-mission spacecraft, such as Space Station and SDI operational satellites, that will operate in low-Earth orbit (LEO) during the late 1990's. Not only must these spacecraft include materials and exterior coatings that are resistant to atomic oxygen surface interactions, but these materials must also provide adequate protection against erosion and pitting that could result from numerous impacts with small particles (less than 100 microns) of orbital space debris. An overview of these concerns is presented, and activities now underway to develop materials and coatings are outlined that will provide adequate atomic protection for future spacecraft. The report also discusses atomic oxygen and orbital debris flight experiments now under development to expand our limited data base, correlate ground-based measurments with flight results, and develop an orbital debris collision warning system for use by future spacecraft.

Keeping Campuses Safe.

ERIC Educational Resources Information Center

Kennedy, Mike

1999-01-01

Describes how colleges and universities are using technology, as well as traditional methods, to keep campuses safe and reduce crime. Topics include using free pizza in a successful contest to teach students about campus safety, installing security cameras, using access-control cards, providing adequate lighting, and creating a bicycle patrol…

Energy Technology Training Conference Proceedings (Atlanta, Georgia, October 27-29, 1976).

ERIC Educational Resources Information Center

Oak Ridge Associated Universities, TN.

Conference goals included identifying projected technical manpower needs and skill mix requirements, potential obstacles to developing an adequate technical education base, and stimulating education, industry, and labor cooperation in technical program development and federal interagency coordination and cooperation. Findings of the conference…

USEPA'S RESEARCH EFFORTS IN SMALL DRINKING WATER TREATMENT TECHNOLOGIES

EPA Science Inventory

Currently, in the United States there are approximately 50,000 small community and 130,000 non-community systems providing water to over 25 million people. The drinking water treatment systems at these locations are not always adequate to comply with current and pending regulati...

Eye aberration analysis with Zernike polynomials

NASA Astrophysics Data System (ADS)

Molebny, Vasyl V.; Chyzh, Igor H.; Sokurenko, Vyacheslav M.; Pallikaris, Ioannis G.; Naoumidis, Leonidas P.

1998-06-01

New horizons for accurate photorefractive sight correction, afforded by novel flying spot technologies, require adequate measurements of photorefractive properties of an eye. Proposed techniques of eye refraction mapping present results of measurements for finite number of points of eye aperture, requiring to approximate these data by 3D surface. A technique of wave front approximation with Zernike polynomials is described, using optimization of the number of polynomial coefficients. Criterion of optimization is the nearest proximity of the resulted continuous surface to the values calculated for given discrete points. Methodology includes statistical evaluation of minimal root mean square deviation (RMSD) of transverse aberrations, in particular, varying consecutively the values of maximal coefficient indices of Zernike polynomials, recalculating the coefficients, and computing the value of RMSD. Optimization is finished at minimal value of RMSD. Formulas are given for computing ametropia, size of the spot of light on retina, caused by spherical aberration, coma, and astigmatism. Results are illustrated by experimental data, that could be of interest for other applications, where detailed evaluation of eye parameters is needed.

Monitoring corrosion and chemistry phenomena in supercritical aqueous systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Macdonald, D.D.; Pang, J.; Liu, C.

1994-12-31

The in situ monitoring of the chemistry and electrochemistry of aqueous heat transport fluids in thermal (nuclear and fossil) power plants is now considered essential if adequate assessment and close control of corrosion and mass transfer phenomena are to be achieved. Because of the elevated temperatures and pressures involved. new sensor technologies are required that are able to measure key parameters under plant operating conditions for extended periods of time. In this paper, the authors outline a research and development program that is designed to develop practical sensors for use in thermal power plants. The current emphasis is on sensorsmore » for measuring corrosion potential, pH, the concentrations of oxygen and hydrogen, and the electrochemical noise generated by corrosion processes at temperatures ranging from {approximately}250 C to 500 C. The program is currently at the laboratory stage, but testing of prototype sensors in a coal-fired supercritical power plant in Spain will begin shortly.« less

Chemical Gas Sensors for Aerospace Applications

NASA Technical Reports Server (NTRS)

Hunter, Gary W.; Liu, C. C.

1998-01-01

Chemical sensors often need to be specifically designed (or tailored) to operate in a given environment. It is often the case that a chemical sensor that meets the needs of one application will not function adequately in another application. The more demanding the environment and specialized the requirement, the greater the need to adapt exiting sensor technologies to meet these requirements or, as necessary, develop new sensor technologies. Aerospace (aeronautic and space) applications are particularly challenging since often these applications have specifications which have not previously been the emphasis of commercial suppliers. Further, the chemical sensing needs of aerospace applications have changed over the years to reflect the changing emphasis of society. Three chemical sensing applications of particular interest to the National Aeronautics and Space Administration (NASA) which illustrate these trends are launch vehicle leak detection, emission monitoring, and fire detection. Each of these applications reflects efforts ongoing throughout NASA. As described in NASA's "Three Pillars for Success", a document which outlines NASA's long term response to achieve the nation's priorities in aerospace transportation, agency wide objectives include: improving safety and decreasing the cost of space travel, significantly decreasing the amount of emissions produced by aeronautic engines, and improving the safety of commercial airline travel. As will be discussed below, chemical sensing in leak detection, emission monitoring, and fire detection will help enable the agency to meet these objectives. Each application has vastly different problems associated with the measurement of chemical species. Nonetheless, the development of a common base technology can address the measurement needs of a number of applications.

An Examination of Principal Leadership Styles and Their Influence on School Performance as Measured by Adequate Yearly Progress at Selected Title I Elementary Schools in South Carolina

ERIC Educational Resources Information Center

Martin, Tammy Faith

2012-01-01

The purpose of this study was to examine principal leadership styles and their influence on school performance as measured by adequate yearly progress at selected Title I schools in South Carolina. The main focus of the research study was to complete descriptive statistics on principal leadership styles in schools that met or did not meet adequate…

Factors influencing the genesis of neurosurgical technology.

PubMed

Bergman, William C; Schulz, Raymond A; Davis, Deanna S

2009-09-01

For any new technology to gain acceptance, it must not only adequately fill a true need, but must also function optimally within the confines of coexisting technology and concurrently available support systems. As an example, over the first decades of the 20th century, a number of drill designs used to perform cranial bone cuts appeared, fell out of favor, and later reappeared as certain supportive technologies emerged. Ultimately, it was the power source that caused one device to prevail. In contrast, a brilliant imaging device, designed to demonstrate an axial view of the lumbar spine, was never allowed to gain acceptance because it was immediately superseded by another device of no greater innovation, but one that performed optimally with popular support technology. The authors discuss the factors that have bearing on the evolution of neurosurgical technology.

Does the early adopter catch the worm or choke on it? A reflective journey of the challenges of technology adoption in a health sciences education institution.

PubMed

Botha-Ravyse, Chrisna; Blignaut, Seugnet

2017-01-01

Early adoption of technology is a struggle well known to early adopters and now to me. Since the demand to use and implement technology in health professions' education has increased, I have been led to adopt various technologies, leading to many headaches. This paper addresses my experiences in developing and implementing technology in health science classrooms in a setting not adequately equipped to do so. After reflecting on my experiences, I conclude that it is crucial that systems help innovators and early adopters as they work to develop and implement teaching and learning technology. Technical decisions should address the needs of the higher education educator. In addition, once an institution chooses a specific technological approach, such as using e-guides, there should be resources in place to support the forerunners of these initiatives.

Monitoring of HIV treatment in seven countries in the WHO Region of the Americas

PubMed Central

Belaunzarán-Zamudio, Pablo F; Shepherd, Bryan E; Crabtree-Ramírez, Brenda E; Luz, Paula M; Grinsztejn, Beatriz; Cesar, Carina; Cahn, Pedro; Cortés, Claudia; Wolff, Marcelo; Pape, Jean W; Padgett, Denis; Gotuzzo, Eduardo; McGowan, Catherine; Sierra-Madero, Juan G

2015-01-01

Abstract Objective To determine the prevalence of adequate monitoring and the costs of measuring CD4+ T-lymphocytes (CD4+ cell) and human immunodeficiency virus (HIV) viral load in people receiving antiretroviral therapy (ART) in seven countries in the WHO Region of the Americas. Methods We obtained retrospective, longitudinal data for 14 476 adults who started a first ART regimen at seven HIV clinics in Argentina, Brazil, Chile, Haiti, Honduras, Mexico and Peru between 2000 and 2011. We estimated the proportion of 180-day periods with adequate monitoring, which we defined as at least one CD4+ cell count and one viral load measurement. Factors associated with adequate monitoring were analysed using regression methods. The costs of the tests were estimated. Findings The median follow-up time was 50.4 months; the proportion of 180-day periods with adequate CD4+ cell counts was 69% while the proportion with adequate monitoring was 62%. Adequate monitoring was more likely in participants who were older, who started ART more recently, whose first regimen included a non-nucleoside reverse transcriptase inhibitor or who had a CD4+ cell count less than 200 cells/µl at ART initiation. The cost of one CD4+ cell count ranged from 7.37 United States dollars (US$) in Argentina to US$ 64.09 in Chile; the cost of one viral load measurement ranged from US$ 20.34 in Brazil to US$ 186.28 in Haiti. Conclusion In HIV-infected participants receiving ART in the WHO Region of the Americas, CD4+ cell count and viral load monitoring was often carried out less frequently than regional guidelines recommend. The laboratory costs of monitoring varied greatly. PMID:26478610

Monitoring of HIV treatment in seven countries in the WHO Region of the Americas.

PubMed

Belaunzarán-Zamudio, Pablo F; Caro-Vega, Yanink N; Shepherd, Bryan E; Crabtree-Ramírez, Brenda E; Luz, Paula M; Grinsztejn, Beatriz; Cesar, Carina; Cahn, Pedro; Cortés, Claudia; Wolff, Marcelo; Pape, Jean W; Padgett, Denis; Gotuzzo, Eduardo; McGowan, Catherine; Sierra-Madero, Juan G

2015-08-01

To determine the prevalence of adequate monitoring and the costs of measuring CD4+ T-lymphocytes (CD4+ cell) and human immunodeficiency virus (HIV) viral load in people receiving antiretroviral therapy (ART) in seven countries in the WHO Region of the Americas. We obtained retrospective, longitudinal data for 14 476 adults who started a first ART regimen at seven HIV clinics in Argentina, Brazil, Chile, Haiti, Honduras, Mexico and Peru between 2000 and 2011. We estimated the proportion of 180-day periods with adequate monitoring, which we defined as at least one CD4+ cell count and one viral load measurement. Factors associated with adequate monitoring were analysed using regression methods. The costs of the tests were estimated. The median follow-up time was 50.4 months; the proportion of 180-day periods with adequate CD4+ cell counts was 69% while the proportion with adequate monitoring was 62%. Adequate monitoring was more likely in participants who were older, who started ART more recently, whose first regimen included a non-nucleoside reverse transcriptase inhibitor or who had a CD4+ cell count less than 200 cells/µl at ART initiation. The cost of one CD4+ cell count ranged from 7.37 United States dollars (US$) in Argentina to US$ 64.09 in Chile; the cost of one viral load measurement ranged from US$ 20.34 in Brazil to US$ 186.28 in Haiti. In HIV-infected participants receiving ART in the WHO Region of the Americas, CD4+ cell count and viral load monitoring was often carried out less frequently than regional guidelines recommend. The laboratory costs of monitoring varied greatly.

Quantification of Training and Competition Loads in Endurance Sports: Methods and Applications.

PubMed

Mujika, Iñigo

2017-04-01

Training quantification is basic to evaluate an endurance athlete's responses to training loads, ensure adequate stress/recovery balance, and determine the relationship between training and performance. Quantifying both external and internal workload is important, because external workload does not measure the biological stress imposed by the exercise sessions. Generally used quantification methods include retrospective questionnaires, diaries, direct observation, and physiological monitoring, often based on the measurement of oxygen uptake, heart rate, and blood lactate concentration. Other methods in use in endurance sports include speed measurement and the measurement of power output, made possible by recent technological advances such as power meters in cycling and triathlon. Among subjective methods of quantification, rating of perceived exertion stands out because of its wide use. Concurrent assessments of the various quantification methods allow researchers and practitioners to evaluate stress/recovery balance, adjust individual training programs, and determine the relationships between external load, internal load, and athletes' performance. This brief review summarizes the most relevant external- and internal-workload-quantification methods in endurance sports and provides practical examples of their implementation to adjust the training programs of elite athletes in accordance with their individualized stress/recovery balance.

Effectiveness of touch and feel (TAF) technique on first aid measures for visually challenged.

PubMed

Mary, Helen; Sasikalaz, D; Venkatesan, Latha

2013-01-01

There is a common perception that a blind person cannot even help his own self. In order to challenge that view, a workshop for visually-impaired people to develop the skills to be independent and productive members of society was conceived. An experimental study was conducted at National Institute of Visually Handicapped, Chennai with the objective to assess the effectiveness of Touch and Feel (TAF) technique on first aid measures for the visually challenged. Total 25 visually challenged people were selected by non-probability purposive sampling technique and data was collected using demographic variable and structured knowledge questionnaire. The score obtained was categorised into three levels: inadequate (0-8), moderately adequate (8 - 17), adequate (17 -25). The study revealed that most of the visually challenged (40%) had inadequate knowledge, and 56 percent had moderately adequate and only few (4%) had adequate knowledge in the pre-test, whereas most (68%) of them had adequate knowledge in the post-test which is statistically significant at p < 0.000 with t-value 6.779. This proves that TAF technique was effective for the visually challenged. There was no association between the demographic variables and their level of knowledge regarding first aid.

Coal's role in California's energy needs

NASA Technical Reports Server (NTRS)

Daines, N. H.

1978-01-01

California's post-industrial society demands confidence in the energy supply system as an essential ingredient for social harmony and adequate job creating capital investment. Confidence requires policies which balance supply and demand using believable methods with adequate allowance for the unexpected, reliance on diverse sources and locations, respect for our environment, sustain our individual freedoms and provide opportunities for economic mobility. Coal will play only a part, but an important part, in a multifaceted energy policy using numerous energy sources and systems, conservation techniques, and cooperating societal institutions. Today's extensive and challenging research and development provides the foundation for future technologies which will further resolve the environmental effects associated with coal.

Staffing levels in endoscopy units.

PubMed

Ott, B J; Igo, M; Shields, N

1994-04-01

Staffing the endoscopy area has become increasingly complex. Growth in procedure volumes, changes in technology, and the application of endoscopy in the diagnosis and treatment of disease contribute to the complexities. The manager must deal with these changes, maintain costs, and still provide adequate staffing to ensure patient safety and quality care. The purpose of this article is to present the results of a laboratory manager survey conducted in 1990. Of 51 laboratory managers who responded, those who rated their laboratories to be adequately staffed averaged 4.2 hr per procedure. The survey results may be useful to laboratory managers seeking to calculate staff needs in a typical endoscopy area.

Automated plant, production management system

NASA Astrophysics Data System (ADS)

Aksenova, V. I.; Belov, V. I.

1984-12-01

The development of a complex of tasks for the operational management of production (OUP) within the framework of an automated system for production management (ASUP) shows that it is impossible to have effective computations without reliable initial information. The influence of many factors involving the production and economic activity of the entire enterprise upon the plan and course of production are considered. It is suggested that an adequate model should be available which covers all levels of the hierarchical system: workplace, section (bridgade), shop, enterprise, and the model should be incorporated into the technological sequence of performance and there should be provisions for an adequate man machine system.

Slewing control experiment for a flexible panel

NASA Technical Reports Server (NTRS)

Juang, Jer-Nan

1987-01-01

Technology areas are identified in which better analytical and/or experimental methods are needed to adequately and accurately control the dynamic responses of multibody space platforms such as the space station. A generic space station solar panel is used to experimentally evaluate current control technologies. Active suppression of solar panel vibrations induced by large angle maneuvers is studied with a torque actuator at the root of the solar panel. These active suppression tests will identify the hardware requirements and adequacy of various controller designs.

Progesterone and the luteal phase: a requisite to reproduction.

PubMed

Mesen, Tolga B; Young, Steven L

2015-03-01

Progesterone production from the corpus luteum is critical for natural reproduction. Progesterone supplementation seems to be an important aspect of any assisted reproductive technology treatment. Luteal phase deficiency in natural cycles is a plausible cause of infertility and pregnancy loss, though there is no adequate diagnostic test. This article describes the normal luteal phase of the menstrual cycle, investigates the controversy surrounding luteal phase deficiency, and presents the current literature for progesterone supplementation during assisted reproductive technologies. Copyright © 2015 Elsevier Inc. All rights reserved.

Automated Miniaturized Instrument for Space Biology Applications and the Monitoring of the Astronauts Health Onboard the ISS

NASA Technical Reports Server (NTRS)

Karouia, Fathi; Peyvan, Kia; Danley, David; Ricco, Antonio J.; Santos, Orlando; Pohorille, Andrew

2011-01-01

Human space travelers experience a unique environment that affects homeostasis and physiologic adaptation. The spacecraft environment subjects the traveler to noise, chemical and microbiological contaminants, increased radiation, and variable gravity forces. As humans prepare for long-duration missions to the International Space Station (ISS) and beyond, effective measures must be developed, verified and implemented to ensure mission success. Limited biomedical quantitative capabilities are currently available onboard the ISS. Therefore, the development of versatile instruments to perform space biological analysis and to monitor astronauts' health is needed. We are developing a fully automated, miniaturized system for measuring gene expression on small spacecraft in order to better understand the influence of the space environment on biological systems. This low-cost, low-power, multi-purpose instrument represents a major scientific and technological advancement by providing data on cellular metabolism and regulation. The current system will support growth of microorganisms, extract and purify the RNA, hybridize it to the array, read the expression levels of a large number of genes by microarray analysis, and transmit the measurements to Earth. The system will help discover how bacteria develop resistance to antibiotics and how pathogenic bacteria sometimes increase their virulence in space, facilitating the development of adequate countermeasures to decrease risks associated with human spaceflight. The current stand-alone technology could be used as an integrated platform onboard the ISS to perform similar genetic analyses on any biological systems from the tree of life. Additionally, with some modification the system could be implemented to perform real-time in-situ microbial monitoring of the ISS environment (air, surface and water samples) and the astronaut's microbiome using 16SrRNA microarray technology. Furthermore, the current system can be enhanced substantially by combining it with other technologies for automated, miniaturized, high-throughput biological measurements, such as fast sequencing, protein identification (proteomics) and metabolite profiling (metabolomics). Thus, the system can be integrated with other biomedical instruments in order to support and enhance telemedicine capability onboard ISS. NASA's mission includes sustained investment in critical research leading to effective countermeasures to minimize the risks associated with human spaceflight, and the use of appropriate technology to sustain space exploration at reasonable cost. Our integrated microarray technology is expected to fulfill these two critical requirements and to enable the scientific community to better understand and monitor the effects of the space environment on microorganisms and on the astronaut, in the process leveraging current capabilities and overcoming present limitations.

76 FR 33701 - Agricultural Technical Advisory Committees for Trade; Renewal

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-09

... technologies and international negotiations, are common within the U.S. planting seeds industry. The proposed... ensure that U.S. trade policy and negotiation objectives adequately reflect U.S. commercial and economic... President's Advisory Committee on Trade and Policy Negotiations; Five general policy advisory committees...

40 CFR 420.113 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... achievable (BAT). 420.113 Section 420.113 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... attainable by the application of the best available technology economically achievable (BAT). The Agency has... adequate control, the Agency is not promulgating more stringent BAT limitations. ...

40 CFR 420.113 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... achievable (BAT). 420.113 Section 420.113 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... attainable by the application of the best available technology economically achievable (BAT). The Agency has... adequate control, the Agency is not promulgating more stringent BAT limitations. ...

40 CFR 420.113 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... achievable (BAT). 420.113 Section 420.113 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... attainable by the application of the best available technology economically achievable (BAT). The Agency has... adequate control, the Agency is not promulgating more stringent BAT limitations. ...

40 CFR 420.113 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... achievable (BAT). 420.113 Section 420.113 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... attainable by the application of the best available technology economically achievable (BAT). The Agency has... adequate control, the Agency is not promulgating more stringent BAT limitations. ...

Preparation of School District Budgets with Microcomputer Electronic Spreadsheets.

ERIC Educational Resources Information Center

Hinitz, Herman J.; Gourley, Marlene Fisher, Ed.

1996-01-01

School districts prepare annual budgets in order to have adequate funding available for their operations. Today's budgets require flexibility and adaptability as school-district finances and governmental regulations and guidelines change. This article discusses several types of budgets and budget preparation that utilize microcomputer technology.…

Disaggregating soil erosion processes within an evolving experimental landscape

USDA-ARS?s Scientific Manuscript database

Soil-mantled landscapes subjected to rainfall, runoff events, and downstream base level adjustments will erode and evolve in time and space. Yet the precise mechanisms for soil erosion also will vary, and such variations may not be adequately captured by soil erosion prediction technology. This st...

The role of research in the failure of the alcopops excise in Australia: what have we learned?

PubMed

Shakeshaft, Anthony; Doran, Christopher M; Byrnes, Joshua

2009-08-17

We believe that a lack of adequate alcohol measures research is partly responsible for the failure of the Australian Government to pass legislation to equalise the excise applied to straight spirits and premixed spirits ("alcopops"). Current measures only assess total alcohol consumption rather than patterns of consumption, and do not adequately identify alcohol-related harm at a population level. Possible solutions include making further efforts to develop applied community-level measures and responding to the repeated calls for national collection and analysis of alcohol sales data. With the Australian Government able to retain the alcopops excise raised to date, there is a unique opportunity for greater collaboration between researchers and government to ensure high-quality and publicly relevant research is funded and conducted to address the current lack of adequate measures research. Measures research is a priority, as this is the basis for increasing the accuracy of data with which more cost-effective public policy and initiatives can be formulated and evaluated. The challenge is for researchers and the Australian Government to align their expertise to ensure revenue from public taxes engenders measurable public health benefit.

Employee organizational commitment and hospital performance.

PubMed

Baird, Kevin M; Tung, Amy; Yu, Yanjie

2017-09-15

There is widespread evidence of the purported benefits of employee organizational commitment (EOC) and its impact on both individual and organizational performance. This study contributes to this literature by providing a unique insight into this relationship, focusing on the interrelationship between EOC with hospital performance and the role of the provision of adequate facilities in eliciting EOC. The aim of this study was to introduce and empirically examine a new theoretical model in which it is argued that the performance of hospitals with regard to the provision of adequate facilities (medical facilities, support facilities, and staff resources) influences the level of EOC, which in turn influences hospital performance with regard to patient care and operational effectiveness. To examine the interrelationships between the provision of adequate facilities, EOC, and hospital performance, the study utilizes a survey of hospital managers. The findings support the theoretical model, with the provision of support facilities and staff resources positively indirectly associated with both patient care and operational effectiveness through their impact on EOC. The findings highlight the importance of providing adequate facilities and EOC within hospitals and suggest that CEOs and general managers should try to enhance the provision of such resources in an attempt to elicit EOC within their hospitals. The findings suggest that managers should try to enhance their provision of adequate facilities in order to elicit EOC and enhance hospital performance. With regard to medical facilities, they should consider and incorporate the latest technology and up-to-date equipment. They should also provide adequate staff resources, including appropriate numbers of beds, nurses, and doctors, to prevent "fatigue" (West, 2001, p. 41) and provide adequate support facilities.

Digitization of the human body in the present-day economy

NASA Astrophysics Data System (ADS)

D'Apuzzo, Nicola

2004-12-01

In this paper we report on the historic development of human body digitization and on the actual state of commercially available technology. Complete systems for the digitization of the human body exist since more than ten years. One of the main users of this technology was the entertainment industry. Every new movie excited with attractive visual effects, but only few people knew that the most thrilling cuts were realized by using virtual persons. The faces and bodies of actors were digitized and the "virtual twin" replaced the actor in the movie. Nowadays, the state of the human body digitization is so high that it is not possible any more to distinguish the real actor from the virtual one. Indeed, for the rush technical development has to be thanked the movie industry, which was one of the strong economic motors for this technology. Today, with the possibility of a massive cost reduction given by new technologies, methods for digitization of the human body are used also in other fields of application, such as ergonomics, medical applications, computer games, biometry and anthropometrics. With the time, this technology becomes interesting also for sport, fitness, fashion and beauty. A large expansion of human body digitization is expected in the near future. To date, different technologies are used commercially for the measurement of the human body. They can be divided into three distinguished groups: laser-scanning, projection of light patterns, combination modeling and image processing. The different solutions have strengths and weaknesses that profile their suitability for specific applications. This paper gives an overview of their differences and characteristics and expresses clues for the selection of the adequate method. Practical examples of commercial exploitation of human body digitization are also presented and new interesting perspectives are introduced.

Digitization of the human body in the present-day economy

NASA Astrophysics Data System (ADS)

D'Apuzzo, Nicola

2005-01-01

In this paper we report on the historic development of human body digitization and on the actual state of commercially available technology. Complete systems for the digitization of the human body exist since more than ten years. One of the main users of this technology was the entertainment industry. Every new movie excited with attractive visual effects, but only few people knew that the most thrilling cuts were realized by using virtual persons. The faces and bodies of actors were digitized and the "virtual twin" replaced the actor in the movie. Nowadays, the state of the human body digitization is so high that it is not possible any more to distinguish the real actor from the virtual one. Indeed, for the rush technical development has to be thanked the movie industry, which was one of the strong economic motors for this technology. Today, with the possibility of a massive cost reduction given by new technologies, methods for digitization of the human body are used also in other fields of application, such as ergonomics, medical applications, computer games, biometry and anthropometrics. With the time, this technology becomes interesting also for sport, fitness, fashion and beauty. A large expansion of human body digitization is expected in the near future. To date, different technologies are used commercially for the measurement of the human body. They can be divided into three distinguished groups: laser-scanning, projection of light patterns, combination modeling and image processing. The different solutions have strengths and weaknesses that profile their suitability for specific applications. This paper gives an overview of their differences and characteristics and expresses clues for the selection of the adequate method. Practical examples of commercial exploitation of human body digitization are also presented and new interesting perspectives are introduced.

Is height the best predictor for adequacy of semitendinosus-alone anterior cruciate ligament reconstruction? A study of hamstring graft dimensions and anthropometric measurements.

PubMed

Sundararajan, S R; Rajagopalakrishnan, Ramakanth; Rajasekaran, S

2016-05-01

To predict adequacy of semitendinosus (ST) graft dimension for ACLR from anthropometric measures. Single tendon harvest for autograft hamstring ACLR could be beneficial to limit donor site morbidity; however, concerns for reconstruction failure based upon inadequate graft size may limit this surgical technique. To predict adequacy, prospectively, 108 patients who underwent ACLR by hamstring graft (STG graft) were enrolled for the study. Mean age was 33.028 years ± 9.539 SD (14-59) with 88 males and 20 females. Anthropometric measurements (height, weight, BMI, thigh and total limb length) and intraoperative data (graft dimensions and bone tunnel measurements) were collected for analysis. Semitendinosus graft can be used as 3-strand (ST3) or 4-strand (ST4) graft. Adequacy criteria for ST3 and ST4 graft dimensions were determined from data analysis. SPSS (v.17) Pearson's correlation coefficient and ROC curves were used for statistical analyses. A total of 74 out of 108 patients (68.52 %) had adequate graft dimensions for ST3 reconstruction. Height equal or greater than 158 cm was predictive of adequate graft for ST3 reconstruction. Only 23 patients (21.3 %) had adequate graft dimensions for ST4 reconstruction. Height equal or greater than 170 cm was predictive of adequate graft for ST4 reconstruction. Height variable had the highest ROC curve area of 0.840 and 0.910 for both ST3 graft and ST4 graft, respectively. Hence, height was used as best predictor to determine adequacy of the graft. Height can be predictive of adequate graft for single tendon ACL reconstruction.

Precise relative navigation using augmented CDGPS

NASA Astrophysics Data System (ADS)

Park, Chan-Woo

2001-10-01

Autonomous formation flying of multiple vehicles is a revolutionary enabling technology for many future space and earth science missions that require distributed measurements, such as sparse aperture radars and stellar interferometry. The techniques developed for the space applications will also have a significant impact on many terrestrial formation flying missions. One of the key requirements of formation flying is accurate knowledge of the relative positions and velocities between the vehicles. Several researchers have shown that the GPS is a viable sensor to perform this relative navigation. However, there are several limitations in the use of GPS because it requires adequate visibility to the NAVSTAR constellation. For some mission scenarios, such as MEO, GEO and tight formation missions, the visibility/geometry of the constellation may not be sufficient to accurately estimate the relative states. One solution to these problems is to include an RF ranging device onboard the vehicles in the formation and form a local constellation that augments the existing NAVSTAR constellation. These local range measurements, combined with the GPS measurements, can provide a sufficient number of measurements and adequate geometry to solve for the relative states. Furthermore, these RF ranging devices can be designed to provide substantially more accurate measures of the vehicle relative states than the traditional GPS pseudolites. The local range measurements also allow relative vehicle motion to be used to efficiently solve for the cycle ambiguities in real-time. This dissertation presents the development of an onboard ranging sensor and the extension of several related algorithms for a formation of vehicles with both GPS and local transmitters. Key among these are a robust cycle ambiguity estimation method and a decentralized relative navigation filter. The efficient decentralized approach to the GPS-only relative navigation problem is extended to an iterative cascade extended Kalman filtering (ICEKF) algorithm when the vehicles have onboard transmitters. Several ground testbeds were developed to demonstrate the feasibility of the augmentation concept and the relative navigation algorithms. The testbed includes the Stanford Pseudolite Transceiver Crosslink (SPTC), which was developed and extensively tested with a formation of outdoor ground vehicles.

Teachers' perceptions of effective science, technology, and mathematics professional development and changes in classroom practices

NASA Astrophysics Data System (ADS)

Boriack, Anna Christine

The purpose of this study is to examine teachers' perceptions of professional development and changes in classroom practice. A proposed conceptual framework for effective professional development that results in changes in classroom practices was developed. Data from two programs that provided professional development to teachers in the areas of technology, mathematics, and science was used to inform the conceptual framework. These two programs were Target Technology in Texas (T3) and Mathematics, Science, and Technology Teacher Preparation Academies (MSTTPA). This dissertation used a multiple article format to explore each program separately, yet the proposed conceptual framework allowed for comparisons to be made between the two programs. The first study investigated teachers' perceptions of technology-related professional development after their districts had received a T3 grant. An online survey was administrated to all teachers to determine their perceptions of technology-related professional development along with technology self-efficacy. Classroom observations were conducted to determine if teachers were implementing technology. The results indicated that teachers did not perceive professional development as being effective and were not implementing technology in their classrooms. Teachers did have high technology self-efficacy and perceived adequate school support, which implies that effective professional development may be a large factor in whether or not teachers implement technology in their classrooms. The second study evaluated participants' perceptions of the effectiveness of mathematics and science professional development offered through a MSTTP academy. Current and former participants completed an online survey which measured their perceptions of academy activities and school environment. Participants also self-reported classroom implementation of technology. Interviews and open-ended survey questions were used to provide further insight into academy activities. The results indicated that academy participants perceived effective academy activities along with a supportive school environment. Additionally, participants reported sometimes implementing technology in their classrooms. These findings suggest that several factors might influence the successful classroom implementation of professional development. The data which supports the conceptual framework shows that effective professional development may play a key role in successful classroom implementation. Future professional development activities should be designed around characteristics for effective professional development to increase the likelihood that classroom implementation might occur.

Identifying and tracking disaster victims: state-of-the-art technology review.

PubMed

Pate, Barbara L

2008-01-01

The failure of our nation to adequately track victims of Hurricane Katrina has been identified as a major weakness of national and local disaster preparedness plans. This weakness has prompted government and private industries to acknowledge that existing paper-based tracking systems are incapable of managing information during a large-scale disaster. In response to this need, efforts are under way to develop new technologies that allow instant access to identity and location information during emergency situations. The purpose of this article is to provide a review of state-of-the-art technologies, with implications and limitations for use during mass casualty incidents.

Quantum image processing: A review of advances in its security technologies

NASA Astrophysics Data System (ADS)

Yan, Fei; Iliyasu, Abdullah M.; Le, Phuc Q.

In this review, we present an overview of the advances made in quantum image processing (QIP) comprising of the image representations, the operations realizable on them, and the likely protocols and algorithms for their applications. In particular, we focus on recent progresses on QIP-based security technologies including quantum watermarking, quantum image encryption, and quantum image steganography. This review is aimed at providing readers with a succinct, yet adequate compendium of the progresses made in the QIP sub-area. Hopefully, this effort will stimulate further interest aimed at the pursuit of more advanced algorithms and experimental validations for available technologies and extensions to other domains.

The NASA-Lewis/ERDA solar heating and cooling technology program. [project planning/energy policy

NASA Technical Reports Server (NTRS)

Couch, J. P.; Bloomfield, H. S.

1975-01-01

Plans by NASA to carry out a major role in a solar heating and cooling program are presented. This role would be to create and test the enabling technology for future solar heating, cooling, and combined heating/cooling systems. The major objectives of the project are to achieve reduction in solar energy system costs, while maintaining adequate performance, reliability, life, and maintenance characteristics. The project approach is discussed, and will be accomplished principally by contract with industry to develop advanced components and subsystems. Advanced hardware will be tested to establish 'technology readiness' both under controlled laboratory conditions and under real sun conditions.

Applications and challenges for thermal energy storage

NASA Astrophysics Data System (ADS)

Kannberg, L. D.; Tomlinson, J. T.

1991-04-01

New thermal energy storage (TES) technologies are being developed and applied as society strives to relieve increasing energy and environmental stresses. Applications for these new technologies range from residential and district heating and cooling using waste and solar energy, to high-temperature energy storage for power production and industrial processes. In the last two decades there has been great interest and development of heat storage systems, primarily for residential and commercial buildings. While development has continued, the rate of advancement has slowed with current technology considered adequate for electrically charged heat storage furnaces. Use of chill storage for building diurnal cooling has received substantial development.

Lubrication of Space Systems (c)

NASA Technical Reports Server (NTRS)

Fusaro, Robert L.

1995-01-01

This article presents an overview of the current state-of-the-art tribology, some current and future perceived space lubrication problem areas, and some potential new lubrication technologies. It is the author's opinion that tribology technology, in general, has not significantly advanced over the last 20 to 30 years, even though some incremental improvements in the technology have occurred. There is a better understanding of elasto-hydrodynamic lubrication, some new lubricating and wear theories have been developed, and some new liquid and solid lubricants have been formulated. However, the important problems of being able to lubricate reliably at high temperatures or at cryogenic temperatures have not been adequately address.

Commercial applications of new photovoltaic technologies

NASA Technical Reports Server (NTRS)

Mcconnell, R.

1991-01-01

The National Renewable Energy Laboratory (NREL) has directed and managed photovoltaic (PV) research and development (R&D) activities for the Department of Energy for more than 13 years. The NREL budget for these activities is almost $33 million for FY 1991. With the world's increasing concern for the environment and the United States' renewed apprehension over secure and adequate energy supplies, the use of semiconducting materials for the direct conversion of sunlight to electricity - photovoltaics - is an excellent example of government-supported high technology ready for further development by U.S. companies. Some new PV technologies and their research progress, some commercial applications of PV, and NREL's technology transfer activities for helping U.S. industry in its efforts to bring new products or services to the marketplace are described.

The NASA-Lewis/ERDA Solar Heating and Cooling Technology Program

NASA Technical Reports Server (NTRS)

Couch, J. P.; Bloomfield, H. S.

1975-01-01

The NASA Lewis Research Center plans to carry out a major role in the ERDA Solar Heating and Cooling Program. This role would be to create and test the enabling technology for future solar heating, cooling, and combined heating/cooling systems. The major objectives of the project are to achieve reduction in solar energy system costs, while maintaining adequate performance, reliability, life, and maintenance characteristics. The project approach is to move progressively through component, subsystem, and then system technology advancement phases in parallel with continuing manufacturing cost assessment studies. This approach will be accomplished principally by contract with industry to develop advanced components and subsystems. This advanced hardware will be tested to establish 'technology readiness' both under controlled laboratory conditions and under real sun conditions.

Distributed nuclear medicine applications using World Wide Web and Java technology.

PubMed

Knoll, P; Höll, K; Mirzaei, S; Koriska, K; Köhn, H

2000-01-01

At present, medical applications applying World Wide Web (WWW) technology are mainly used to view static images and to retrieve some information. The Java platform is a relative new way of computing, especially designed for network computing and distributed applications which enables interactive connection between user and information via the WWW. The Java 2 Software Development Kit (SDK) including Java2D API, Java Remote Method Invocation (RMI) technology, Object Serialization and the Java Advanced Imaging (JAI) extension was used to achieve a robust, platform independent and network centric solution. Medical image processing software based on this technology is presented and adequate performance capability of Java is demonstrated by an iterative reconstruction algorithm for single photon emission computerized tomography (SPECT).

To promote adoption of household health technologies, think beyond health.

PubMed

Thurber, Mark C; Warner, Christina; Platt, Lauren; Slaski, Alexander; Gupta, Rajesh; Miller, Grant

2013-10-01

Health risks from poor malaria control, unsafe water, and indoor air pollution are responsible for an important share of the global disease burden-and they can be addressed by efficacious household health technologies that have existed for decades. However, coverage rates of these products among populations at risk remain disappointingly low. We conducted a review of the medical and public health literatures and found that health considerations alone are rarely sufficient motivation for households to adopt and use these technologies. In light of these findings, we argue that health education and persuasion campaigns by themselves are unlikely to be adequate. Instead, health policymakers and professionals must understand what users value beyond health and possibly reengineer health technologies with these concerns in mind.

To Promote Adoption of Household Health Technologies, Think Beyond Health

PubMed Central

Warner, Christina; Platt, Lauren; Slaski, Alexander; Gupta, Rajesh; Miller, Grant

2013-01-01

Health risks from poor malaria control, unsafe water, and indoor air pollution are responsible for an important share of the global disease burden—and they can be addressed by efficacious household health technologies that have existed for decades. However, coverage rates of these products among populations at risk remain disappointingly low. We conducted a review of the medical and public health literatures and found that health considerations alone are rarely sufficient motivation for households to adopt and use these technologies. In light of these findings, we argue that health education and persuasion campaigns by themselves are unlikely to be adequate. Instead, health policymakers and professionals must understand what users value beyond health and possibly reengineer health technologies with these concerns in mind. PMID:23948003

Evidence-Based Principles for Using Technology-Enhanced Learning in the Continuing Professional Development of Health Professionals.

PubMed

Scott, Karen M; Baur, Louise; Barrett, Jenny

2017-01-01

Increasingly, health professional training involves the use of educational technologies through what is broadly termed "Technology-Enhanced Learning" (TEL). TEL includes hardware, such as computers and mobile devices, and software, such as software applications (apps), learning management systems, and discussion boards. For many years, TEL has formed an integral part of health professional programs and is growing in acceptance, if not expectation, in postgraduate training and continuing education. TEL generally aims to be flexible, engaging, learner focused and interactive, and may involve collaboration and communication. It offers many benefits for learning and teaching, whether used on its own or in conjunction with face-to-face teaching through blended learning. The ubiquity of mobile devices in clinical settings means TEL is ideal for busy clinicians, both as learners and teachers. TEL enables participants to learn at a time and place that is convenient to them, so learners living in geographically dispersed locations can access standardized courses. To realize these potential benefits, we recommend that those developing TEL programs for health professionals take a systematic approach to planning, development, implementation, and evaluation. To that end, we propose 10 principles: clarify purpose and conduct a needs assessment; allocate adequate time and technology; incorporate proven approaches to improve learning; consider the need for a skills component; enable interaction between learners and with others; create different resources for different groups; pilot before implementing; incorporate measures to retain learners; provide opportunities for revision to aid retention; and evaluate learning outcomes, not just satisfaction.

3D body scanning technology for fashion and apparel industry

NASA Astrophysics Data System (ADS)

D'Apuzzo, Nicola

2007-01-01

This paper presents an overview of 3D body scanning technologies with applications to the fashion and apparel industry. Complete systems for the digitization of the human body exist since more than fifteen years. One of the main users of this technology with application in the textile field was the military industry. In fact, body scanning technology is being successfully employed since many years in military bases for a fast selection of the correct size of uniforms for the entire staff. Complete solutions were especially developed for this field of application. Many different research projects were issued for the exploitation of the same technology in the commercial field. Experiments were performed and start-up projects are to time running in different parts of the world by installing full body scanning systems in various locations such as shopping malls, boutiques or dedicated scanning centers. Everything is actually ready to be exploited and all the required hardware, software and solutions are available: full body scanning systems, software for the automatic and reliable extraction of body measurements, e-kiosk and web solutions for the presentation of garments, high-end and low-end virtual-try-on systems. However, complete solutions in this area have still not yet found the expected commercial success. Today, with the on-going large cost reduction given by the appearance of new competitors, methods for digitization of the human body becomes more interesting for the fashion and apparel industry. Therefore, a large expansion of these technologies is expected in the near future. To date, different methods are used commercially for the measurement of the human body. These can be divided into three major distinguished groups: laser-scanning, projection of light patterns, combination modeling and image processing. The different solutions have strengths and weaknesses that profile their suitability for specific applications. This paper gives an overview of their differences and characteristics and expresses clues for the selection of the adequate method. A special interest is given to practical examples of the commercial exploitation of human body digitization with applications to the fashion and apparel industry.

Global Competitives: Economic Imperatives for School Reform.

ERIC Educational Resources Information Center

Negroni, Peter J.

This paper describes the need for systemic educational reform in view of the gap between students who are adequately prepared for tomorrow's jobs and the needs of business/industry. Rapid changes in the workplace--fueled by technological advances, altered family structures, expectations of varied and higher performance skills, and an increase of…

State of Technology for Rehabilitation of Wastewater Collection Systems

EPA Science Inventory

The variety of tools available to the sewer utility engineer today is remarkably different than it was during the 1960s. However, the average rate of system rehabilitation and upgrading within the U.S. is still not adequate to keep pace with increasing needs, quality demands, an...

A GUIDE FOR USE IN DEVELOPING TRAINING PROGRAMS IN DRAFTING AND DESIGN TECHNOLOGY.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson.

INITIAL COURSE OUTLINES WERE PREPARED BY INSTRUCTORS. INDIVIDUAL COURSES WERE THEN EXPANDED AND COORDINATED WITH OTHER COURSES. THE CURRICULUM LABORATORY STAFF REORGANIZED AND EDITED THE MATERIAL. A COMMITTEE OF INDUSTRIAL REPRESENTATIVES REVIEWED AND PERSONALLY ENDORSED IT AS BEING APPROPRIATE AND ADEQUATE FOR TRAINING DRAFTING AND DESIGN…

When the Chips Are Down.

ERIC Educational Resources Information Center

Ashton, Ray

1995-01-01

Strips away advertising hyperbole to explain multimedia CD-ROM technology and its place in today's classrooms. Only the newest computers are adequate for multimedia CD-ROM; only 10% of all computers in schools have CD-ROM drives attached. CD-ROM drives' performance varies, installation hassles abound, and the "edutainment" market directs…

Enterprise Integration: An Experiential Learning Model

ERIC Educational Resources Information Center

Cameron, Brian H.; Purao, Sandeep

2010-01-01

With the ceaseless development of new and more advanced technologies, along with their growing influence and control over business and commerce, it is no surprise that the educational community is struggling to come up with programs to educate students to adequately handle these developments. Textbooks are becoming a thing of the past, for…

Psycho-Pedagogical Conditions of Formation of Professional Creative Activity of Future Professionals

ERIC Educational Resources Information Center

Askarovna, Uzakbayeva Sakypzhamal; Yertaevna, Abeltayeva Zhanel; Erhanovna, Sadykova Ayzhan; Rysbekova, R.

2015-01-01

Organizational, psychological and pedagogical conditions (the position of student in the educational process, the inclusion of students in active and independent activities, the creation of a positive creative environment and psychological climate, the active use of the forms, methods, technologies, adequate formation of professional creative…

Journals with Borders, Journals without Borders: Under-Representation of Asian Countries in Educational Research Journals

ERIC Educational Resources Information Center

Atkinson, Roger

2013-01-01

As "Australasian Journal of Educational Technology" (AJET) Production Editor, the author evaluates whether AJET is providing a fair and adequate representation for researchers in Asian countries, with particular reference to AJET's aspiration to be "a front ranked international journal with an Australasian character" (Atkinson…

Research@ARL: Network Sciences

DTIC Science & Technology

2013-03-01

and Power Allocation for Minimum Energy Consumption in Consensus Networks ................ 21 Stefania Sardellitti, Sergio Barbarossa, and Ananthram...battlefield effectiveness and to ensure that Soldier performance requirements are adequately considered in technology development and system design...Operations (NCO). NCW/NCO seeks to dramatically increase mission effectiveness via robust networking for information sharing leading to shared

To amend the Federal Power Act to provide additional authorities to adequately protect the critical electric infrastructure against cyber attack, and for other purposes.

THOMAS, 111th Congress

Rep. Thompson, Bennie G. [D-MS-2

2009-04-30

House - 05/26/2009 Referred to the Subcommittee on Emerging Threats, Cybersecurity, and Science and Technology. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

STEM: The 21st Century Sputnik

ERIC Educational Resources Information Center

Garrett, Joyce Lynn

2008-01-01

The author of this article argues that, just as Americans were shocked into action, when the Soviet Union launched Sputnik in 1957, by strengthening STEM (science, technology, engineering, and mathematics) in the educational curriculum, Americans must be shocked again. The nation must address the failure of its leaders to provide adequate funding…

Advanced Filter Technology.

DTIC Science & Technology

1983-11-01

UNCLASIFIEDF/V 20/68 N ENS 1~*28 1225 111131.2 III12.2 L-0II 111111. MICROCOP RESOLUTION TEST CHART NAONAL HL’IAU OU 1ANPAPP 𔃾-0 November, 1983...half-waveplates do not have Adequate wide field response to accommodate it, hence the need for compound waveplates. The compound waveplates are

STEM Motivation Interventions for Adolescents: A Promising Start, but Further to Go

ERIC Educational Resources Information Center

Rosenzweig, Emily Q.; Wigfield, Allan

2016-01-01

One way to increase students' participation in science, technology, engineering, and mathematics (STEM) fields is to target their motivation. Researchers have conducted a growing number of interventions addressing students' motivation in STEM; however, this body of work has not been adequately reviewed. We systematically reviewed experimental and…

Fostering Enterprise Architecture Education and Training with the Enterprise Architecture Competence Framework

ERIC Educational Resources Information Center

Tambouris, Efthimios; Zotou, Maria; Kalampokis, Evangelos; Tarabanis, Konstantinos

2012-01-01

Enterprise architecture (EA) implementation refers to a set of activities ultimately aiming to align business objectives with information technology infrastructure in an organization. EA implementation is a multidisciplinary, complicated and endless process, hence, calls for adequate education and training programs that will build highly skilled…

Conditions for the Application of Science and Technology for Human Welfare

ERIC Educational Resources Information Center

Sabin, Albert B.

1972-01-01

Maintains that the overpopulation without adequate resources in Asia, Latin America and other parts of the world can be catastrophic to all the countries in the world. Efforts to provide aid to developing nations have been inadequate. International cooperation for aid is very much needed now. (PS)

Changes in Pre-Service Teachers' Algebraic Misconceptions by Using Computer-Assisted Instruction

ERIC Educational Resources Information Center

Lin, ByCheng-Yao; Ko, Yi-Yin; Kuo, Yu-Chun

2014-01-01

In order to carry out current reforms regarding algebra and technology in elementary school mathematics successfully, pre-service elementary mathematics teachers must be equipped with adequate understandings of algebraic concepts and self-confidence in using computers for their future teaching. This paper examines the differences in preservice…

[The importance of neurological examinations in the age of the technological revolution].

PubMed

Berbel-García, A; González-Spínola, J; Martínez-Salio, A; Porta-Etessam, J; Pérez-Martínez, D A; de Toledo, M; Sáiz-Díaz, R A

Neurologic practice and care have been modified in many important ways during the past ten years, to adapt to the explosion of new information and new technology. Students, residents and practicing physicians have been continuing programs to a model that focuses almost exclusively on the applications to neurologic disorders of the new knowledge obtained from biomedical research. On the other hand high demand for outpatient neurologic care prevents adequate patient's evaluation. Case 1: 65 years old female. Occipital headache diagnosed of tensional origin (normal computerized tomography). Two months later is re-evaluated due to intractable pain and hypoglossal lesion. An amplified computerized tomography revealed a occipital condyle metastasis. Case 2: 21 years old female. Clinical suspicion of demyelinating disease due to repeated facial paresis and sensitive disorder. General exploration and computerized tomography revealed temporo-mandibular joint. Case 3: 60 years old female. Valuation of anticoagulant therapy due to repeated transient ischemic attacks. She suffered from peripheral facial palsy related to auditory cholesteatoma. Neurologic education is nowadays orientated to new technologies. On the other hand, excessive demand prevents adequate valuation and a minute exploration is substituted by complementary evaluations. These situations generate diagnostic mistakes or iatrogenic. It would be important a consideration of the neurologic education profiles and fulfillment of consultations time recommendations for outpatients care.

Microbial enhanced oil recovery: Entering the log phase

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bryant, R.S.

1995-12-31

Microbial enhanced oil recovery (MEOR) technology has advanced internationally since 1980 from a laboratory-based evaluation of microbial processes to field applications. In order to adequately support the decline in oil production in certain areas, research on cost-effective technologies such as microbial enhanced oil recovery processes must focus on both near-term and long-term applications. Many marginal wells are desperately in need of an inexpensive improved oil recovery technology today that can assist producers in order to prevent their abandonment. Microbial enhanced waterflooding technology has also been shown to be an economically feasible technology in the United States. Complementary environmental research andmore » development will also be required to address any potential environmental impacts of microbial processes. In 1995 at this conference, the goal is to further document and promote microbial processes for improved oil recovery and related technology for solving environmental problems.« less

Extending the Concept and Assessment of Teacher Efficacy.

ERIC Educational Resources Information Center

Rich, Yisrael; And Others

1996-01-01

Two teacher efficacy subscales developed by S. Gibson and M. Dembo (1984) translated into Hebrew and administered to Israeli teachers retained their factor structures and adequate reliability. A subscale developed for the study to measure teacher efficacy in enhancing student social relations specifically also had adequate reliability. (SLD)

Minimizing Interpolation Bias and Precision Error in In Vivo μCT-based Measurements of Bone Structure and Dynamics

PubMed Central

de Bakker, Chantal M. J.; Altman, Allison R.; Li, Connie; Tribble, Mary Beth; Lott, Carina; Tseng, Wei-Ju; Liu, X. Sherry

2016-01-01

In vivo μCT imaging allows for high-resolution, longitudinal evaluation of bone properties. Based on this technology, several recent studies have developed in vivo dynamic bone histomorphometry techniques that utilize registered μCT images to identify regions of bone formation and resorption, allowing for longitudinal assessment of bone remodeling. However, this analysis requires a direct voxel-by-voxel subtraction between image pairs, necessitating rotation of the images into the same coordinate system, which introduces interpolation errors. We developed a novel image transformation scheme, matched-angle transformation (MAT), whereby the interpolation errors are minimized by equally rotating both the follow-up and baseline images instead of the standard of rotating one image while the other remains fixed. This new method greatly reduced interpolation biases caused by the standard transformation. Additionally, our study evaluated the reproducibility and precision of bone remodeling measurements made via in vivo dynamic bone histomorphometry. Although bone remodeling measurements showed moderate baseline noise, precision was adequate to measure physiologically relevant changes in bone remodeling, and measurements had relatively good reproducibility, with intra-class correlation coefficients of 0.75-0.95. This indicates that, when used in conjunction with MAT, in vivo dynamic histomorphometry provides a reliable assessment of bone remodeling. PMID:26786342

Minimizing Interpolation Bias and Precision Error in In Vivo µCT-Based Measurements of Bone Structure and Dynamics.

PubMed

de Bakker, Chantal M J; Altman, Allison R; Li, Connie; Tribble, Mary Beth; Lott, Carina; Tseng, Wei-Ju; Liu, X Sherry

2016-08-01

In vivo µCT imaging allows for high-resolution, longitudinal evaluation of bone properties. Based on this technology, several recent studies have developed in vivo dynamic bone histomorphometry techniques that utilize registered µCT images to identify regions of bone formation and resorption, allowing for longitudinal assessment of bone remodeling. However, this analysis requires a direct voxel-by-voxel subtraction between image pairs, necessitating rotation of the images into the same coordinate system, which introduces interpolation errors. We developed a novel image transformation scheme, matched-angle transformation (MAT), whereby the interpolation errors are minimized by equally rotating both the follow-up and baseline images instead of the standard of rotating one image while the other remains fixed. This new method greatly reduced interpolation biases caused by the standard transformation. Additionally, our study evaluated the reproducibility and precision of bone remodeling measurements made via in vivo dynamic bone histomorphometry. Although bone remodeling measurements showed moderate baseline noise, precision was adequate to measure physiologically relevant changes in bone remodeling, and measurements had relatively good reproducibility, with intra-class correlation coefficients of 0.75-0.95. This indicates that, when used in conjunction with MAT, in vivo dynamic histomorphometry provides a reliable assessment of bone remodeling.

Simultaneous distance measurement at multiple wavelengths using the intermode beats from a femtosecond laser coherent supercontinuum

NASA Astrophysics Data System (ADS)

Salido-Monzú, David; Wieser, Andreas

2018-04-01

The intermode beats generated by direct detection of a mode-locked femtosecond laser represent inherent high-quality and high-frequency modulations suitable for electro-optical distance measurement (EDM). This approach has already been demonstrated as a robust alternative to standard long-distance EDM techniques. However, we extend this idea to intermode beating of a wideband source obtained by spectral broadening of a femtosecond laser. We aim at establishing a technological basis for accurate and flexible multiwavelength distance measurement. Results are presented from experiments using beat notes at 1 GHz generated by two bandpass-filtered regions from both extremes of a coherent supercontinuum ranging from 550 to 1050 nm. The displacement measurements performed simultaneously on both colors on a short-distance setup show that noise and coherence of the wideband laser are adequate for achieving accuracies of about 0.01 mm on each channel with a potential improvement by accessing higher beat notes. Pointing and power instabilities have been identified as dominant sources of systematic deviations. Nevertheless, the results demonstrate the basic feasibility of the proposed technique. We consider this a promising starting point for the further development of multiwavelength EDM enabling increased accuracy over long distances through dispersion-based integral refractivity compensation and for remote surface material probing along with distance measurement in laser scanning.

Optoacoustic measurements of human placenta and umbilical blood oxygenation

NASA Astrophysics Data System (ADS)

Nanovskaya, T. N.; Petrov, I. Y.; Petrov, Y.; Patrikeeva, S. L.; Ahmed, M. S.; Hankins, G. D. V.; Prough, D. S.; Esenaliev, R. O.

2016-03-01

Adequate oxygenation is essential for normal embryogenesis and fetal growth. Perturbations in the intrauterine oxidative environment during pregnancy are associated with several pathophysiological disorders such as pregnancy loss, preeclampsia, and intrauterine growth restriction. We proposed to use optoacoustic technology for monitoring placental and fetal umbilical blood oxygenation. In this work, we studied optoacoustic monitoring of oxygenation in placenta and umbilical cord blood ex vivo using technique of placenta perfusion. We used a medical grade, nearinfrared, tunable, optoacoustic system developed and built for oxygenation monitoring in blood vessels and in tissues. First, we calibrated the system for cord blood oxygenation measurements by using a CO-Oximeter (gold standard). Then we performed validation in cord blood circulating through the catheters localized on the fetal side of an isolated placental lobule. Finally, the oxygenation measurements were performed in the perfused placental tissue. To increase or decrease blood oxygenation, we used infusion of a gas mixture of 95% O2 + 5% CO2 and 95% N2 + 5% CO2, respectively. In placental tissue, up to four cycles of changes in oxygenation were performed. The optoacoustically measured oxygenation in circulating cord blood and in placental lobule closely correlated with the actual oxygenation data measured by CO-Oximeter. We plan to further test the placental and cord blood oxygenation monitoring with optoacoustics in animal and clinical studies.

Auroral-polar cap environment and its impact on spacecraft plasma interactions

NASA Technical Reports Server (NTRS)

Garrett, H. B.

1985-01-01

The high density of the plasma at shuttle altitude is likely to increase greatly the possibility of arcing and shorting of exposed high voltage surfaces. For military missions over the polar caps and through the auoroal zones, the added hazards of high energy auroral particle fluxes or solar flares will further increase the hazard to shuttle, its crew, and its mission. A review of the role that the auroral and polar cap environment play in causing these interactions was conducted. A simple, though comprehensive attempt at modelling the shuttle environment at 400 km will be described that can be used to evaluate the importance of the interactions. The results of this evaluation are then used to define areas where adequate environmental measurements will be necessary if a true spacecraft interactions technology is to be developed for the shuttle.

Evaluation of the CEAS model for barley yields in North Dakota and Minnesota

NASA Technical Reports Server (NTRS)

Barnett, T. L. (Principal Investigator)

1981-01-01

The CEAS yield model is based upon multiple regression analysis at the CRD and state levels. For the historical time series, yield is regressed on a set of variables derived from monthly mean temperature and monthly precipitation. Technological trend is represented by piecewise linear and/or quadriatic functions of year. Indicators of yield reliability obtained from a ten-year bootstrap test (1970-79) demonstrated that biases are small and performance as indicated by the root mean square errors are acceptable for intended application, however, model response for individual years particularly unusual years, is not very reliable and shows some large errors. The model is objective, adequate, timely, simple and not costly. It considers scientific knowledge on a broad scale but not in detail, and does not provide a good current measure of modeled yield reliability.

Evaluation of the Williams-type model for barley yields in North Dakota and Minnesota

NASA Technical Reports Server (NTRS)

Barnett, T. L. (Principal Investigator)

1981-01-01

The Williams-type yield model is based on multiple regression analysis of historial time series data at CRD level pooled to regional level (groups of similar CRDs). Basic variables considered in the analysis include USDA yield, monthly mean temperature, monthly precipitation, soil texture and topographic information, and variables derived from these. Technologic trend is represented by piecewise linear and/or quadratic functions of year. Indicators of yield reliability obtained from a ten-year bootstrap test (1970-1979) demonstrate that biases are small and performance based on root mean square appears to be acceptable for the intended AgRISTARS large area applications. The model is objective, adequate, timely, simple, and not costly. It consideres scientific knowledge on a broad scale but not in detail, and does not provide a good current measure of modeled yield reliability.

Wind tunnel tests of the dynamic characteristics of the fluidic rudder

NASA Technical Reports Server (NTRS)

Belsterling, C. A.

1976-01-01

The fourth phase is given of a continuing program to develop the means to stabilize and control aircraft without moving parts or a separate source of power. Previous phases have demonstrated the feasibility of (1) generating adequate control forces on a standard airfoil, (2) controlling those forces with a fluidic amplifier and (3) cascading non-vented fluidic amplifiers operating on ram air supply pressure. The foremost objectives of the fourth phase covered under Part I of this report were to demonstrate a complete force-control system in a wind tunnel environment and to measure its static and dynamic control characteristics. Secondary objectives, covered under Part II, were to evaluate alternate configurations for lift control. The results demonstrate an overall response time of 150 msec, confirming this technology as a viable means for implementing low-cost reliable flight control systems.

Ethics in technological culture: a programmatic proposal for a pragmatist approach.

PubMed

Keulartz, Jozef; Schermer, Maartje; Korthals, Michiel; Swierstra, Tsjalling

2004-01-01

Neither traditional philosophy nor current applied ethics seem able to cope adequately with the highly dynamic character of our modern technological culture. This is because they have insufficient insight into the moral significance of technological artifacts and systems. Here, much can be learned from recent science and technology studies (STS). They have opened up the black box of technological developments and have revealed the intimate intertwinement of technology and society in minute detail. However, while applied ethics is characterized by a certain "technology blindness," the most influential approaches within STS show a "normative deficit" and display on agnostic or even antagonistic attitude toward ethics. To repair the blind spots of both applied ethics and STS, the authors sketch the contours of a pragmatist approach. They will explore the tasks and tools of a pragmatist ethics and pay special attention to the exploration of future worlds disclosed and shaped by technology and the management of deep value conflicts inherent in a pluralistic society.

Physician communication via Internet-enabled technology: A systematic review.

PubMed

Barr, Neil G; Randall, Glen E; Archer, Norman P; Musson, David M

2017-10-01

The use of Internet-enabled technology (information and communication technology such as smartphone applications) may enrich information exchange among providers and, consequently, improve health care delivery. The purpose of this systematic review was to gain a greater understanding of the role that Internet-enabled technology plays in enhancing communication among physicians. Studies were identified through a search in three electronic platforms: the Association for Computing Machinery Digital Library, ProQuest, and Web of Science. The search identified 5140 articles; of these, 21 met all inclusion criteria. In general, physicians were satisfied with Internet-enabled technology, but consensus was lacking regarding whether Internet-enabled technology improved efficiency or made a difference to clinical decision-making. Internet-enabled technology can play an important role in enhancing communication among physicians, but the extent of that benefit is influenced by (1) the impact of Internet-enabled technology on existing work practices, (2) the availability of adequate resources, and (3) the nature of institutional elements, such as privacy legislation.

Do Activity Level Outcome Measures Commonly Used in Neurological Practice Assess Upper-Limb Movement Quality?

PubMed

Demers, Marika; Levin, Mindy F

2017-07-01

Movement is described in terms of task-related end point characteristics in external space and movement quality (joint rotations in body space). Assessment of upper-limb (UL) movement quality can assist therapists in designing effective treatment approaches for retraining lost motor elements and provide more detailed measurements of UL motor improvements over time. To determine the extent to which current activity level outcome measures used in neurological practice assess UL movement quality. Outcome measures assessing arm/hand function at the International Classification of Function activity level recommended by neurological clinical practice guidelines were reviewed. Measures assessing the UL as part of a general mobility assessment, those strictly evaluating body function/structure or participation, and paediatric measures were excluded. In all, 15 activity level outcome measures were identified; 9 measures assess how movement is performed by measuring either end point characteristics or movement quality. However, except for the Reaching Performance Scale for Stroke and the Motor Evaluation Scale for Upper Extremity in Stroke Patients, these measures only account for deficits indirectly by giving a partial score if movements are slower or if the person experiences difficulties. Six outcome measures neither assess any parameters related to movement quality, nor distinguish between improvements resulting from motor compensation or recovery of desired movement strategies. Current activity measures may not distinguish recovery from compensation and adequately track changes in movement quality over time. Movement quality may be incorporated into clinical assessment using observational kinematics with or without low-cost motion tracking technology.

A Conceptual Methodology for Assessing Acquisition Requirements Robustness against Technology Uncertainties

NASA Astrophysics Data System (ADS)

Chou, Shuo-Ju

2011-12-01

In recent years the United States has shifted from a threat-based acquisition policy that developed systems for countering specific threats to a capabilities-based strategy that emphasizes the acquisition of systems that provide critical national defense capabilities. This shift in policy, in theory, allows for the creation of an "optimal force" that is robust against current and future threats regardless of the tactics and scenario involved. In broad terms, robustness can be defined as the insensitivity of an outcome to "noise" or non-controlled variables. Within this context, the outcome is the successful achievement of defense strategies and the noise variables are tactics and scenarios that will be associated with current and future enemies. Unfortunately, a lack of system capability, budget, and schedule robustness against technology performance and development uncertainties has led to major setbacks in recent acquisition programs. This lack of robustness stems from the fact that immature technologies have uncertainties in their expected performance, development cost, and schedule that cause to variations in system effectiveness and program development budget and schedule requirements. Unfortunately, the Technology Readiness Assessment process currently used by acquisition program managers and decision-makers to measure technology uncertainty during critical program decision junctions does not adequately capture the impact of technology performance and development uncertainty on program capability and development metrics. The Technology Readiness Level metric employed by the TRA to describe program technology elements uncertainties can only provide a qualitative and non-descript estimation of the technology uncertainties. In order to assess program robustness, specifically requirements robustness, against technology performance and development uncertainties, a new process is needed. This process should provide acquisition program managers and decision-makers with the ability to assess or measure the robustness of program requirements against such uncertainties. A literature review of techniques for forecasting technology performance and development uncertainties and subsequent impacts on capability, budget, and schedule requirements resulted in the conclusion that an analysis process that coupled a probabilistic analysis technique such as Monte Carlo Simulations with quantitative and parametric models of technology performance impact and technology development time and cost requirements would allow the probabilities of meeting specific constraints of these requirements to be established. These probabilities of requirements success metrics can then be used as a quantitative and probabilistic measure of program requirements robustness against technology uncertainties. Combined with a Multi-Objective Genetic Algorithm optimization process and computer-based Decision Support System, critical information regarding requirements robustness against technology uncertainties can be captured and quantified for acquisition decision-makers. This results in a more informed and justifiable selection of program technologies during initial program definition as well as formulation of program development and risk management strategies. To meet the stated research objective, the ENhanced TEchnology Robustness Prediction and RISk Evaluation (ENTERPRISE) methodology was formulated to provide a structured and transparent process for integrating these enabling techniques to provide a probabilistic and quantitative assessment of acquisition program requirements robustness against technology performance and development uncertainties. In order to demonstrate the capabilities of the ENTERPRISE method and test the research Hypotheses, an demonstration application of this method was performed on a notional program for acquiring the Carrier-based Suppression of Enemy Air Defenses (SEAD) using Unmanned Combat Aircraft Systems (UCAS) and their enabling technologies. The results of this implementation provided valuable insights regarding the benefits and inner workings of this methodology as well as its limitations that should be addressed in the future to narrow the gap between current state and the desired state.

Some problems in mechanics of growing solids with applications to AM technologies

NASA Astrophysics Data System (ADS)

Manzhirov, A. V.

2018-04-01

Additive Manufacturing (AM) technologies are an exciting area of the modern industrial revolution and have applications in engineering, medicine, electronics, aerospace industry, etc. AM enables cost-effective production of customized geometry and parts by direct fabrication from 3D data and mathematical models. Despite much progress in AM technologies, problems of mechanical analysis for AM fabricated parts yet remain to be solved. This paper deals with three main mechanical problems: the onset of residual stresses, which occur in the AM process and can lead to failure of the parts, the distortion of the final shape of AM fabricated parts, and the development of technological solutions aimed at improving existing AM technologies and creating new ones. An approach proposed deals with the construction of adequate analytical model and effective methods for the simulation of AM processes for fabricated solid parts.

Possibilities of psychoacoustics to determine sound quality

NASA Astrophysics Data System (ADS)

Genuit, Klaus

For some years, acoustic engineers have increasingly become aware of the importance of analyzing and minimizing noise problems not only with regard to the A-weighted sound pressure level, but to design sound quality. It is relatively easy to determine the A-weighted SPL according to international standards. However, the objective evaluation to describe subjectively perceived sound quality - taking into account psychoacoustic parameters such as loudness, roughness, fluctuation strength, sharpness and so forth - is more difficult. On the one hand, the psychoacoustic measurement procedures which are known so far have yet not been standardized. On the other hand, they have only been tested in laboratories by means of listening tests in the free-field and one sound source and simple signals. Therefore, the results achieved cannot be transferred to complex sound situations with several spatially distributed sound sources without difficulty. Due to the directional hearing and selectivity of human hearing, individual sound events can be selected among many. Already in the late seventies a new binaural Artificial Head Measurement System was developed which met the requirements of the automobile industry in terms of measurement technology. The first industrial application of the Artificial Head Measurement System was in 1981. Since that time the system was further developed, particularly by the cooperation between HEAD acoustics and Mercedes-Benz. In addition to a calibratable Artificial Head Measurement System which is compatible with standard measurement technologies and has transfer characteristics comparable to human hearing, a Binaural Analysis System is now also available. This system permits the analysis of binaural signals regarding physical and psychoacoustic procedures. Moreover, the signals to be analyzed can be simultaneously monitored through headphones and manipulated in the time and frequency domain so that those signal components being responsible for noise annoyance can be found. Especially in complex sound situations with several spatially distributed sound sources, standard, one-channel measurements methods cannot adequately determine sound quality, the acoustic comfort, or annoyance of sound events.

Methodological approach for the assessment of ultrasound reproducibility of cardiac structure and function: a proposal of the study group of Echocardiography of the Italian Society of Cardiology (Ultra Cardia SIC) Part I

PubMed Central

2011-01-01

When applying echo-Doppler imaging for either clinical or research purposes it is very important to select the most adequate modality/technology and choose the most reliable and reproducible measurements. Quality control is a mainstay to reduce variability among institutions and operators and must be obtained by using appropriate procedures for data acquisition, storage and interpretation of echo-Doppler data. This goal can be achieved by employing an echo core laboratory (ECL), with the responsibility for standardizing image acquisition processes (performed at the peripheral echo-labs) and analysis (by monitoring and optimizing the internal intra- and inter-reader variability of measurements). Accordingly, the Working Group of Echocardiography of the Italian Society of Cardiology decided to design standardized procedures for imaging acquisition in peripheral laboratories and reading procedures and to propose a methodological approach to assess the reproducibility of echo-Doppler parameters of cardiac structure and function by using both standard and advanced technologies. A number of cardiologists experienced in cardiac ultrasound was involved to set up an ECL available for future studies involving complex imaging or including echo-Doppler measures as primary or secondary efficacy or safety end-points. The present manuscript describes the methodology of the procedures (imaging acquisition and measurement reading) and provides the documentation of the work done so far to test the reproducibility of the different echo-Doppler modalities (standard and advanced). These procedures can be suggested for utilization also in non referall echocardiographic laboratories as an "inside" quality check, with the aim at optimizing clinical consistency of echo-Doppler data. PMID:21943283

Evaluation of Methods to Increase Light Under Ferry Terminals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blanton, Susan L.; Thom, Ronald M.; Borde, Amy B.

2002-01-02

To address concerns of resource agencies about the potential impacts of ferry terminal expansion on valuable habitat functions and resource use of nearshore areas, the Pacific Northwest National Laboratory (PNNL), in partnership with the Washington State Department of Transportation (WSDOT), conducted field trials with off-the-shelf products that promote light passage through dock structures. These products included a SunTunnel, deck prisms, and a metal halide greenhouse light. Light measurements (photosynthetically active radiation, PAR) were also recorded beneath glass blocks and a metal grating installed at Clinton Ferry Terminal on Whidbey Island, WA. A review of other studies measuring the effects ofmore » dock shading and alternate dock materials was conducted. PAR measurements from this study were related to minimum requirements for eelgrass Zostera marina photosynthesis and to the known maximum photosynthetic ?saturation? rate for Z. marina. We also related PAR measurements to what we know about light effects on juvenile salmonid feeding and passage under overwater structures. Of the light technologies tested, the metal halide light, SunTunnel, glass blocks, and grating potentially provide enough light for eelgrass growth underneath a ferry terminal with similar construction to the Clinton Ferry Terminal. All of these technologies would potentially provide adequate light under conditions where eelgrass is located at its upper depth limit and a dock is close to the water surface. Light levels needed to allow fish to feed and to form schools are low (~ 1-2 mmol/m2/s), and much less than those required for photosynthesis. Our research indicates that installing any of the tested light products would likely maintain light levels under the dock above those required for active feeding by juvenile salmonids.« less

Passive and hybrid solar technologies program summary

NASA Astrophysics Data System (ADS)

1985-05-01

The goal of the national energy policy is to foster an adequate supply of energy at reasonable prices. This policy recognizes that adequate supply requires flexibility, with no undue reliance on any single source of supply. The goal of reasonable prices suggests economic efficiency so that consumers, individuals, commercial and industrial users alike, are not penalized by government regulation or subside. The strategies for achieving this energy policy goal are: (1) to minimize federal regulation in energy pricing while maintaining public health and safety and environmental quality, and (2) to promote a balanced and mixed energy resource system through research and development. One of the keys to energy sufficiently is the scientific application of passive solar energy techniques.

Clinical use of serum parvovirus and distemper virus antibody titers for determining revaccination strategies in healthy dogs.

PubMed

Twark, L; Dodds, W J

2000-10-01

To assess whether serum canine parvovirus (CPV) and canine distemper virus (CDV) antibody titers can be used to determine revaccination protocols in healthy dogs. Case series. 1,441 dogs between 6 weeks and 17 years old. CPV and CDV antibody titers in serum samples submitted to a commercial diagnostic laboratory were measured by use of indirect fluorescent antibody (IFA) tests. On the basis of parallel measurements of CPV and CDV serum antibody titers in 61 paired serum samples determined by use of hemagglutination inhibition and serum neutralization methods, respectively, we considered titers > or = 1:5 (IFA test) indicative of an adequate antibody response. Age, breed, and sex were not significantly associated with adequate CPV- or CDV-specific antibody responses. Of 1,441 dogs, 1,370 (95.1%) had adequate and 71 (4.9%) had inadequate antibody responses to CPV, whereas 1,346 of 1,379 (97.6%) dogs had adequate and 33 (2.4%) had inadequate responses to CDV. Vaccination histories were available for 468 dogs (468 for CPV, 457 for CDV). Interval between last vaccination and antibody measurement was 1 to 2 years for the majority (281/468; 60.0%) of dogs and 2 to 7 years for 142 of 468 (30.3%) dogs. Interval was < 1 year in only 45 of 468 (9.6%) dogs. The high prevalence of adequate antibody responses (CPV, 95.1%; CDV, 97.6%) in this large population of dogs suggests that annual revaccination against CPV and CDV may not be necessary.

Giant-FOG: A new player in ground motion instrumentation

NASA Astrophysics Data System (ADS)

Guattari, F.; de Toldi, E.; Bigueur, A.; Decitre, J. B.; Ponceau, D.; Sèbe, O.; Frenois, A.; Schindelé, F.; Moluçon, C.; Gaffet, S.; Ducloux, E.; Lefèvre, H.

2017-12-01

Based on recent experiences developing very low noise fiber-optic gyroscopes (FOG), first performance results on very large fiber-optic coils of up to 1m diameter are presented. The goal for constructing large FOGs is to evaluate experimentally the physical limits of this kind of technology and to reach the lowest possible noise. While these experiments are probing the fundamental limits of the FOG technology, they also serves as a first step for a cost effective very low noise laboratory rotational seismometer, which could be a game changer in instrumentation of ground motion. Build a Giant-FOG has several difficulties: The first is winding of the coil, the second concerns the mechanical substrate, and third is related to the measurement. - To our knowledge, a winding machine, large enough to wind coil of a 1 meter diameter, does not exist, but thanks to the iXblue expertise in the manufacturing of winding machines and calibration tables, a hydride system has been designed, merging these two technology to fulfill the requirement of winding a large coil on an adequate rotational platform. The characterization of the wobbles of the system will be presented, since this is a critical parameter for the winding and ultimately the performance. - To achieve the highest attainable measurement sensitivity to the real ground rotation, the design of the mechanical substrate of the coil is critical to reduce as much as possible the sensor sensitivities to environmental noises. A preliminary assessment of the global noise performance of the 1m diameter FOG sensor will be presented. - To demonstrate the on-site performance, the low noise inter-disciplinary underground laboratory (LSBB, Rustrel, France), with a dense array of precisely oriented broad-band seismometers, provides the possibility to compare Large FOG rotation records with Array Derivated Rotation measurement method. Results of different prototypes during the development process will be presented to underline the applicability of each technological response to the Large-FOG requirements. Finally we conclude with presentation of the achieved results with a 1m scale diameter FOG having more than 10km of fiber length.

Web-based remote sensing of building energy performance

NASA Astrophysics Data System (ADS)

Martin, William; Nassiopoulos, Alexandre; Le Cam, Vincent; Kuate, Raphaël; Bourquin, Frédéric

2013-04-01

The present paper describes the design and the deployment of an instrumentation system enabling the energy monitoring of a building in a smart-grid context. The system is based on a network of wireless low power IPv6 sensors. Ambient temperature and electrical power for heating are measured. The management, storage, visualisation and treatment of the data is done through a web-based application that can be deployed as an online web service. The same web-based framework enables the acquisition of distant measured data such as those coming from a nearby weather station. On-site sensor and weather station data are then adequately treated based on inverse identification methods. The algorithms aim at determining the parameters of a numerical model suitable for a short-time horizon prediction of indoor climate. The model is based on standard multi-zone modelling assumptions and takes into account solar, airflow and conductive transfers. It was specially designed to render accurately inertia effects that are used in a demand-response strategy. All the hardware or software technologies that are used in the system are open and low cost so that they comply with the constraints of on-site deployment in buildings. The measured data as well as the model predictions can be accessed ubiquously through the web. This feature enables to consider a wide range of energy management applications at the disctrict, city or national level. The entire system has been deployed and tested in an experimental office building in Angers, France. It demonstrates the potential of ICT technologies to enable remotely controlled monitoring and surveillance in real time.

Decision method for optimal selection of warehouse material handling strategies by production companies

NASA Astrophysics Data System (ADS)

Dobos, P.; Tamás, P.; Illés, B.

2016-11-01

Adequate establishment and operation of warehouse logistics determines the companies’ competitiveness significantly because it effects greatly the quality and the selling price of the goods that the production companies produce. In order to implement and manage an adequate warehouse system, adequate warehouse position, stock management model, warehouse technology, motivated work force committed to process improvement and material handling strategy are necessary. In practical life, companies have paid small attantion to select the warehouse strategy properly. Although it has a major influence on the production in the case of material warehouse and on smooth costumer service in the case of finished goods warehouse because this can happen with a huge loss in material handling. Due to the dynamically changing production structure, frequent reorganization of warehouse activities is needed, on what the majority of the companies react basically with no reactions. This work presents a simulation test system frames for eligible warehouse material handling strategy selection and also the decision method for selection.

Achieving Accreditation Council for Graduate Medical Education duty hours compliance within advanced surgical training: a simulation-based feasibility assessment.

PubMed

Obi, Andrea; Chung, Jennifer; Chen, Ryan; Lin, Wandi; Sun, Siyuan; Pozehl, William; Cohn, Amy M; Daskin, Mark S; Seagull, F Jacob; Reddy, Rishindra M

2015-11-01

Certain operative cases occur unpredictably and/or have long operative times, creating a conflict between Accreditation Council for Graduate Medical Education (ACGME) rules and adequate training experience. A ProModel-based simulation was developed based on historical data. Probabilistic distributions of operative time calculated and combined with an ACGME compliant call schedule. For the advanced surgical cases modeled (cardiothoracic transplants), 80-hour violations were 6.07% and the minimum number of days off was violated 22.50%. There was a 36% chance of failure to fulfill any (either heart or lung) minimum case requirement despite adequate volume. The variable nature of emergency cases inevitably leads to work hour violations under ACGME regulations. Unpredictable cases mandate higher operative volume to ensure achievement of adequate caseloads. Publically available simulation technology provides a valuable avenue to identify adequacy of case volumes for trainees in both the elective and emergency setting. Copyright © 2015 Elsevier Inc. All rights reserved.

Modeling the dynamics of multipartite quantum systems created departing from two-level systems using general local and non-local interactions

NASA Astrophysics Data System (ADS)

Delgado, Francisco

2017-12-01

Quantum information is an emergent area merging physics, mathematics, computer science and engineering. To reach its technological goals, it is requiring adequate approaches to understand how to combine physical restrictions, computational approaches and technological requirements to get functional universal quantum information processing. This work presents the modeling and the analysis of certain general type of Hamiltonian representing several physical systems used in quantum information and establishing a dynamics reduction in a natural grammar for bipartite processing based on entangled states.

Transforming Child and Youth Mental Health Care via Innovative Technological Solutions.

PubMed

Pepler, Antonio; Boydell, Katherine M; Teshima, John; Volpe, Tiziana; Braunberger, Peter G; Minden, Debbie

2011-01-01

Live interactive videoconferencing and other technologies offer innovative opportunities for effective delivery of specialized child and adolescent mental health services. In this article, an example of a comprehensive telepsychiatry program is presented to highlight a variety of capacity-building initiatives that are responsive to community needs and cultures; these initiatives are allowing children, youth and caregivers to access otherwise-distant specialist services within their home communities. Committed, enthusiastic champions, adequate funding and infrastructure, creativity and a positive attitude represent key elements in the adaptation of this demonstrated user-friendly modality.

Data Management System (DMS) Evolution Analysis

NASA Technical Reports Server (NTRS)

Douglas, Katherine

1990-01-01

The all encompassing goal for the Data Management System (DMS) Evolution Analysis task is to develop an advocacy for ensuring that growth and technology insertion issues are properly and adequately addressed during DMS requirements specification, design, and development. The most efficient methods of addressing those issues are via planned and graceful evolution, technology transparency, and system growth margins. It is necessary that provisions, such as those previously mentioned, are made to accommodate advanced missions requirements (e.g., Human Space Exploration Programs) in addition to evolving Space Station Freedom operations and user requirements .

Use of simulation technology in Australian Defence Force resuscitation training.

PubMed

Hendrickse, A D; Ellis, A M; Morris, R W

2001-06-01

Realistic training of health personnel for the resuscitation of military casualties is problematic. There are few opportunities for personnel to obtain the necessary experience unless working in a busy emergency or trauma environment. Even so, the specific nature of military trauma means that many aspects of casualty management may not be adequately covered in the civilian domain. This paper discusses the use of advanced simulation technology in the training of military resuscitation teams. Such training has been available to members of the Australian Defence Force (ADF) for two years.

Female sterilization in Thailand: past, present and future.

PubMed

Intaraprasert, S; Chaturachinda, K

1993-01-01

Female sterilization is the most effective contraception and has a very high demographic effectiveness. In the past, there have been developments in technological aspects. At present, the minilaparotomy and laparoscopic sterilization have been well developed and widely used, but the number of new acceptors is declining, and there is still a large number of unmet demands. Social action rather than technological action is needed. In the future, steps to increase the number of acceptors, are, proper management of the sterilization services, including adequate monitoring and a good surveillance system.

76 FR 14835 - Approval and Promulgation of Air Quality Implementation Plan; Missouri; Proposed Disapproval of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-18

... the state's conclusion should be supported by an adequate technical analysis. EPA recommended the...)(2)(D)(i)(I) must be supported by an adequate technical analysis.\\5\\ EPA recommended the various..., the state did not further evaluate or demonstrate with a technical analysis that these measures...

76 FR 14831 - Approval and Promulgation of Air Quality Implementation Plan; Kansas; Proposed Disapproval of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-18

... State's conclusion should be supported by an adequate technical analysis. EPA recommended the various...) must be supported by an adequate technical analysis.\\5\\ EPA recommended the various types of... evaluate or demonstrate with a technical analysis that these measures address the requirements of 110(a)(2...

76 FR 4592 - Approval and Promulgation of Air Quality Implementation Plan; North Carolina; Disapproval of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-26

... adequate technical analysis. Second, EPA recommended the various types of information that could be... submission, it did not further evaluate or demonstrate with a technical analysis that this measure and their.... Unfortunately, without an adequate technical analysis EPA does not believe that states can sufficiently address...

Absorbed dose determination using experimental and analytical predictions of x-ray spectra

NASA Astrophysics Data System (ADS)

Edwards, David Lee

1999-10-01

Electron beam welding in a vacuum is a technology that NASA is investigating as a joining technique for manufacture of space structures. The interaction of energetic electrons with metal produces x-rays. This investigation characterizes the x-ray environment due to operation of an in-vacuum electron beam welding tool and provides recommendations for adequate radiation shielding for astronauts performing the in-vacuum electron beam welding. NASA, in a joint venture with the Russian Space Agency, was scheduled to perform a series of welding in space experiments on board the United States Space Shuttle. This series of experiments was named the International Space Welding Experiment (ISWE). The hardware associated with the ISWE was leased to NASA, by the Paton Welding Institute (PWI) in Ukraine, for ground based welding experiments in preparation for flight. Two ground tests were scheduled, using the ISWE electron beam welding tool, to characterize the radiation exposure to an astronaut during the operation of the ISWE. These radiation exposure tests used Thermoluminescence Dosimeters (TLD's) shielded with material currently used by astronauts during Extra Vehicular Activities (EVA) to measure the radiation dose. The TLD's were exposed to x- ray radiation generated by operation of the ISWE in- vacuum electron beam welding tool. This investigation was the first known application of TLD's to measure absorbed dose from x-rays of energy less than 10 keV. The ISWE hardware was returned to Ukraine before the issue of adequate shielding for the astronauts was completely verified. Therefore alternate experimental and analytical methods were developed to measure and predict the x-ray spectral and intensity distribution generated by ISWE electron beam impact with metal. These x-ray spectra were normalized to an equivalent ISWE exposure then used to calculate the absorbed radiation dose to astronauts. These absorbed dose values were compared to TLD measurements obtained during actual operation of the ISWE in-vacuum electron beam welding tool. The calculated absorbed dose values were found to be in good agreement with the measured TLD values.

STRATEGIES FOR OPTIMIZING THE APPLICATION OF MEDIA TO VOCATIONAL AND TECHNICAL EDUCATION CURRICULA.

ERIC Educational Resources Information Center

CHRISTENSEN, VIRGIL E.; TAYLOR, ROBERT E.

THE ASSUMPTION IS MADE THAT VOCATIONAL AND TECHNICAL EDUCATION IS "UNDEVELOPED" IN TERMS OF ADEQUATELY EXPLOITING THE FULL RANGE OF POSSIBILITIES INHERENT IN MODERN EDUCATIONAL MEDIA AND TECHNOLOGY. THIS PAPER PRESENTS AN OVERVIEW OF THE BROAD SETTING IN WHICH VOCATIONAL AND TECHNICAL EDUCATION FUNCTIONS, THE GENERAL BENEFITS OF APPLICATIONS OF…

Teaching and Assessing Polygons Using Technology

ERIC Educational Resources Information Center

Soucie, Tanja; Radovic, Nikol; Svedrec, Renata; Kokic, Ivana

2011-01-01

Studying geometry is an integral component of learning mathematics because it allows students to analyse and interpret the world they live in as well as equip them with tools they can apply in other areas of mathematics. Therefore, students need to develop an understanding of geometric concepts as well as gaining adequate geometry related skills.…

Guidelines to Design Engineering Education in the Twenty-First Century for Supporting Innovative Product Development

ERIC Educational Resources Information Center

Violante, Maria Grazia; Vezzetti, Enrico

2017-01-01

In the twenty-first century, meeting our technological challenges demands educational excellence, a skilled populace that is ready for the critical challenges society faces. There is widespread consensus, however, that education systems are failing to adequately prepare all students with the essential twenty-first century knowledge and skills…

The Role and Mission of African Higher Education: Preparing for the 21st Century and Beyond.

ERIC Educational Resources Information Center

Assie-Lumumba, N'Dri T.

1996-01-01

Summarizes issues and recommendations from eight recent studies of the mission of African higher education, including those concerning demand, access, equity, quality and relevance, science and technology, governance, links between universities and the broader society (including business and government), adequate and sustainable funding, and…

Online Training of TPACK Skills of Higher Education Scholars: A Cross-Institutional Impact Study

ERIC Educational Resources Information Center

Rienties, Bart; Brouwer, Natasa; Bohle Carbonell, Katerina; Townsend, Danielle; Rozendal, Anne-Petra; van der Loo, Janneke; Dekker, Peter; Lygo-Baker, Simon

2013-01-01

Higher education institutions should provide adequate training for teachers in order to increase their awareness of the complex interplay between technology, pedagogy and the cognitive knowledge in their disciplines. However, research has shown that providing effective staff development from teacher educators to support these teachers' skills is…

Who or What Contributes to Student Satisfaction in Different Blended Learning Modalities?

ERIC Educational Resources Information Center

Diep, Anh-Nguyet; Zhu, Chang; Struyven, Katrien; Blieck, Yves

2017-01-01

Different blended learning (BL) modalities and the interaction effect between human and technological factors on student satisfaction need adequately researched to shed more light on successful BL implementation. The objective of the present article is three-fold: (1) to present a model to predict student satisfaction with BL programs, (2) to…

77 FR 11974 - Approval and Promulgation of Implementation Plans; State of Iowa Regional Haze State...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-28

... and beyond. The modeling was based on PM Source Apportionment Technology (PSAT) for the Comprehensive... sources and the State adequately determined the apportionment of those pollutants from sources located... Class I areas caused by emissions of air pollutants from numerous sources located over a wide geographic...

Teaching Information Policy in the Digital Age: Issues, Strategies, and Innovation

ERIC Educational Resources Information Center

Jaeger, Paul T.; Gorham, Ursula; Taylor, Natalie Greene; Bertot, John C.

2015-01-01

As technology continues to advance at a rapid rate, it is increasingly important to consider how information policies are formulated and the impact that they have on both the public's access to information and the roles of information professionals. As such, current and future information professionals must be adequately prepared through education…

High fiber-low matrix composites: kenaf fiber/polypropylene.

Treesearch

Anand R. Sanadi; J.F. Hunt; D.F. Caulfield; G. Kovacsvolgyi; B. Destree

2002-01-01

Considerable interest has been generated in the use of lignocellulosic fibers and wastes (both agricultural and wood based) as fillers and reinforcements in thermoplastics. In general, present technologies limit fiber loading in thermoplastics to about 60 percent by weight of fiber. To produce high fiber content composites for commercial use while maintaining adequate...

Highly filled formaldehyde-free natural fiber polypropylene composites

Treesearch

Anand R. Sanadi; Daniel F. Caulfield

2000-01-01

Considerable interest has been generated in the use of lignocellulosic fibers and wastes (both agricultural and wood based) as fillers and reinforcements in thermoplastics. In general, present technologies limit fiber loading in thermoplastics to about 50% by weight of fiber. To produce high fiber content composites for commercial use while maintaining adequate...

Computer Aided Instruction: A Study of Student Evaluations and Academic Performance

ERIC Educational Resources Information Center

Collins, David; Deck, Alan; McCrickard, Myra

2008-01-01

Computer aided instruction (CAI) encompasses a broad range of computer technologies that supplement the classroom learning environment and can dramatically increase a student's access to information. Criticism of CAI generally focuses on two issues: it lacks an adequate foundation in educational theory and the software is difficult to implement…

Technological Challenges and Opportunities in the United States Education Information Network Collaboration and Service Delivery.

ERIC Educational Resources Information Center

Ely, Donald P.

The definition, role, and functions of "library" are changing. The National Library of Education (NLE) is in transition from a traditional library to a virtual library encompassing "one stop [any stop] shopping" through conventional and digital means. To adequately plan for the transition, the customer and potential customers…

78 FR 41684 - Special Conditions: Embraer S.A. Model EMB-550 Airplanes, Sudden Engine Stoppage

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-11

... airplane has novel or unusual design features as compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. These design features include engine size and the... contain adequate or appropriate safety standards for this design feature. These special conditions contain...

Building of Causality: A Future for School Librarianship Research and Practice

ERIC Educational Resources Information Center

Mardis, Marcia A.; Kimmel, Sue C.; Pasquini, Laura A.

2018-01-01

The Colorado Study (Lance, Wellborn, and Hamilton-Pennell 1993) and its many replications in other states have demonstrated that when educators and learners had access to a qualified school librarian in the context of a thoughtfully built, adequately resourced, technology rich, and widely accessible school library, learners tended to flourish on…

Technicians, Education and Equity--With the Benefit of Foresight?

ERIC Educational Resources Information Center

Imrie, Bradford W.

This paper considers the sources and education of an adequate supply of technicians to ensure New Zealand's technological future. It deals with such questions as the source of technicians, and what their learning experiences and outcomes should be. Included in the paper are specific sections dealing with: (1) "Authority for Advanced…

Creating Anytime, Anywhere Learning for All Students: Key Elements of a Comprehensive Digital Infrastructure

ERIC Educational Resources Information Center

Thigpen, Kamila

2014-01-01

While connecting the nation's schools and libraries to the internet by modernizing and expanding the federal E-rate program currently dominates education technology efforts, a new report from the Alliance for Excellent Education urges that adequate broadband access be accompanied by a comprehensive "digital infrastructure" that unlocks…

A Study of Coordination Between Mathematics and Chemistry in the Pre-Technical Program.

ERIC Educational Resources Information Center

Loiseau, Roger A.

This research was undertaken to determine whether the mathematics course offered to students taking courses in chemical technology was adequate. Students in a regular class and an experimental class were given mathematics and chemistry pretests and posttests. The experimental class was taught using a syllabus designed to maximize the coherence…

Whole genome sequencing may not be adequate to determine genome relatedness for surveillance and outbreak investigation of foodborne pathogens

USDA-ARS?s Scientific Manuscript database

Introduction: Advances in genomic technologies have improve the speed and precision of foodborne disease outbreak detection and response. For the past two decades, pulsed field gel electrophoresis (PFGE) has been the method of choice for surveillance and outbreak investigation with foodborne pathoge...

Increasing College Access through the Implementation of Naviance: An Exploratory Study

ERIC Educational Resources Information Center

Christian, David; Lawrence, Amy; Dampman, Nicole

2017-01-01

High school counselors play a key role in increasing students' access to college. With increasing student-to-counselor ratios as well as demands on their time, school counselors often lack the ability to provide adequate college counseling. In this article, we explored how school counselors can use educational technology, specifically the online…

How In-Service Teachers Develop Electronic Lessons

ERIC Educational Resources Information Center

Zsoldos-Marchis, Iuliana

2014-01-01

Computer assisted teaching (CAL) is considered to be a modern teaching method, but it is not widely used by teachers because lack of technology and adequate educational softwares in schools; or lack of teachers' knowledge on methodology and computer use. In order to select the most efficient educational software for their class, teachers should…

Satellite News Feeds: Protecting a Transient Interest.

ERIC Educational Resources Information Center

Atwater, Tony; And Others

Satellite news gathering (SNG) has been widely adopted in broadcast journalism in recent years, and appears likely to grow in importance as local television news operations increase their reliance on it. However, because the technology for SNG is so new, information transmitted through SNG systems is not adequately protected under current laws.…

Incorporating digital imaging into dental hygiene practice.

PubMed

Saxe, M J; West, D J

1997-01-01

The objective of this paper is to describe digital imaging technology: available modalities, scientific imaging process, advantages and limitations, and applications to dental hygiene practice. Advances in technology have created innovative imaging modalities for intraoral radiography that eliminate film as the traditional image receptor. Digital imaging generates instantaneous radiographic images on a display monitor following exposure. Advantages include lower patient exposure per image and elimination of film processing. Digital imaging enhances diagnostic capabilities and, therefore, treatment decisions by the oral healthcare provider. Utilization of digital imaging technology for intraoral radiography will advance the practice of dental hygiene. Although spatial resolution is inferior to conventional film, digital imaging provides adequate resolution to diagnose oral diseases. Dental hygienists must evaluate new technologies in radiography to continue providing quality care while reducing patient exposure to ionizing radiation.

Augmented Reality Tower Technology Assessment

NASA Technical Reports Server (NTRS)

Reisman, Ronald J.; Brown, David M.

2009-01-01

Augmented Reality technology may help improve Air Traffic Control Tower efficiency and safety during low-visibility conditions. This paper presents the assessments of five off-duty controllers who shadow-controlled' with an augmented reality prototype in their own facility. Initial studies indicated unanimous agreement that this technology is potentially beneficial, though the prototype used in the study was not adequate for operational use. Some controllers agreed that augmented reality technology improved situational awareness, had potential to benefit clearance, control, and coordination tasks and duties and could be very useful for acquiring aircraft and weather information, particularly aircraft location, heading, and identification. The strongest objections to the prototype used in this study were directed at aircraft registration errors, unacceptable optical transparency, insufficient display performance in sunlight, inadequate representation of the static environment and insufficient symbology.

Commentary on the reimbursement paradox.

PubMed

Reaven, Nancy L; Rosenbloom, Judy

2009-07-01

Reimbursement policies are a critical step in the incorporation of new technologies and therapies into the clinical armamentarium. Reimbursement is an umbrella concept describing the process to manage and pay for healthcare services, including benefit coverage, coding, and payment processes. The technologies and services used in therapeutic temperature management are not directly reimbursed, leading to challenges by hospitals and physicians that the services are too expensive to use. The reimbursement models used in the United States make it increasingly difficult for new technologies and therapies to gain direct reimbursement, part of a strategy by insurers, including Medicare and private insurance companies, to manage access to health care services. Insurers, physicians, hospitals, and other providers face conflicting financial incentives in current reimbursement systems. Aligning the financial incentives underlying reimbursement systems is necessary to adequately support new technologies of merit.

Addressing critical issues in the development of an Oncology Information System.

PubMed

Urda, D; Ribelles, N; Subirats, J L; Franco, L; Alba, E; Jerez, J M

2013-05-01

This paper presents the experience on the design and implementation of a user-centered Oncology Information System developed for the Medical Oncology Department at the "Hospital Universitario Virgen de la Victoria", in Málaga, Spain. The project focused on the aspects considered in the literature as critical factors for a successful deployment and usage of a health information system. System usability, adequate technology, integration of clinical routines, real-time statistical analysis of data, information confidentiality and standard protocol-based external interconnection were the key aspects considered. The developed system is based on a web application with a modular and layered architecture accounting for usability, ease of maintenance and further system development. Evaluation of system usability was carried at three and fifteen months after system deployment to analyze the advantages/disadvantages experienced by the end-users. A thorough prior analysis of clinical activities and workflows, the use of the adequate technology, and the availability of data analysis tools will almost guarantee success in the deployment of an Oncology Information System. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

A Security Audit Framework to Manage Information System Security

NASA Astrophysics Data System (ADS)

Pereira, Teresa; Santos, Henrique

The widespread adoption of information and communication technology have promoted an increase dependency of organizations in the performance of their Information Systems. As a result, adequate security procedures to properly manage information security must be established by the organizations, in order to protect their valued or critical resources from accidental or intentional attacks, and ensure their normal activity. A conceptual security framework to manage and audit Information System Security is proposed and discussed. The proposed framework intends to assist organizations firstly to understand what they precisely need to protect assets and what are their weaknesses (vulnerabilities), enabling to perform an adequate security management. Secondly, enabling a security audit framework to support the organization to assess the efficiency of the controls and policy adopted to prevent or mitigate attacks, threats and vulnerabilities, promoted by the advances of new technologies and new Internet-enabled services, that the organizations are subject of. The presented framework is based on a conceptual model approach, which contains the semantic description of the concepts defined in information security domain, based on the ISO/IEC_JCT1 standards.

Systemic Crisis of Civilization: In Search for Adequate Solution

NASA Astrophysics Data System (ADS)

Khozin, Grigori

In December 1972 a jumbo jet crashed in the Florida Everglades with the loss of 101 lives. The pilot, distracted by a minor malfunction, failed to note until too late the warning signal that - correctly - indicated an impending disaster. His sudden, astonished cry of Hey, what happening here? were his last words 1. Three decades after this tragic episode, as the Humankind approaches the threshold of the third Millennium, the problem of adequate reaction to warning signals of different nature and of distinguishing minor malfunctions in everyday life of society, in economy and technology as well as in evolution of biosphere from grave threats to the world community and the phenomenon of life on our planet remains crucial to human survival and the future of Civilization. Rational use of knowledge and technology available to the world community remains in this context the corner stone of discussions on the destiny of the intelligent life both on the planet Earth and in the Universe (the fact of intelligent life in the Universe is to be detected by the Humankind)…

PsychDT Working Group: Report Psychosocial Aspects of Artificial Pancreas Systems.

PubMed

Barnard, Katharine D; Venkat, Manu V; Close, Kelly; Heinemann, Lutz; Weissberg-Benchell, Jill; Hood, Korey K; Kubiak, Thomas; Kowalski, Aaron J; Laffel, Lori

2015-07-01

Diabetes technology is a cornerstone of diabetes management in the 21st century, with advances in available devices over recent years playing a central role in the way that health care has progressed. Psychosocial interventions have been shown to have a positive impact on glycemic control, reduce psychological distress and reduce costs of health care. Addressing and improving psychosocial outcomes that complement biomedical improvements and looking to the future are crucial to enhance patient acceptance of artificial pancreas (AP) systems. To achieve closer collaboration and comparability across different AP research trials, a working group was established. Existing measures fail to adequately capture the extent to which human and psychological factors play a role in the uptake and efficient use of AP systems. Understanding these factors will ultimately lead to the most benefit for users. Reliable measures of the psychosocial impact of AP systems for users is crucial to ensure that (1) regulatory authorities are able to robustly consider these aspects as part of their approval process, (2) government and private payers are able to factor these aspects into their decisions regarding reimbursement, and (3) persons with diabetes maximize benefits in terms of both glycemic control and quality of life to minimize the burden of diabetes in everyday life. This working group will serve as a platform to foster exchange, identify research needs, and guide and initiate collaborative research laying the groundwork for optimal utilization of diabetes technology in clinical diabetes care. A close collaboration among all key stakeholders is crucial to ensure that devices are designed, trialed, approved, and provided with minimal user burden and maximum beneficial effect. © 2015 Diabetes Technology Society.

Structural-Geometric Functionalization of the Additively Manufactured Prototype of Biomimetic Multispiked Connecting Ti-Alloy Scaffold for Entirely Noncemented Resurfacing Arthroplasty Endoprostheses.

PubMed

Uklejewski, Ryszard; Winiecki, Mariusz; Rogala, Piotr; Patalas, Adam

2017-01-01

The multispiked connecting scaffold (MSC-Scaffold) prototype, inspired by the biological system of anchorage of the articular cartilage in the periarticular trabecular bone by means of subchondral bone interdigitations, is the essential innovation in fixation of the bone in resurfacing arthroplasty (RA) endoprostheses. The biomimetic MSC-Scaffold, due to its complex geometric structure, can be manufactured only using additive technology, for example, selective laser melting (SLM). The major purpose of this work is determination of constructional possibilities for the structural-geometric functionalization of SLM-manufactured MSC-Scaffold prototype, compensating the reduced ability-due to the SLM technological limitations-to accommodate the ingrowing bone filling the interspike space of the prototype, which is important for the prototype bioengineering design. Confocal microscopy scanning of components of the SLM-manufactured prototype of total hip resurfacing arthroplasty (THRA) endoprosthesis with the MSC-Scaffold was performed. It was followed by the geometric measurements of a variety of specimens designed as the fragments of the MSC-Scaffold of both THRA endoprosthesis components. The reduced ability to accommodate the ingrowing bone tissue in the SLM-manufactured prototypes versus that in the corresponding CAD models has been quantitatively determined. Obtained results enabled to establish a way of compensatory structural-geometric functionalization, allowing the MSC-Scaffold adequate redesigning and manufacturing in additive SLM technology.

Telemonitoring: use in the management of hypertension

PubMed Central

Sivakumaran, Darshi; Earle, Kenneth Anthony

2014-01-01

Hypertension is a major modifiable risk factor for cardiovascular, retinal, and kidney disease. In the past decade, attainment rates of treatment targets for blood pressure control in the UK and US have increased; however, <11% of adult men and women have achieved adequate blood pressure control. Technological advances in blood pressure measurement and data transmission may improve the capture of information but also alter the relationship between the patient and the provider of care. Telemonitoring systems can be used to manage patients with hypertension, and have the ability to enable best-practice decisions more consistently. The improvement in choice for patients as to where and who manages their hypertension, as well as better adherence to treatment, are potential benefits. An evidence base is growing that shows that telemonitoring can be more effective than usual care in improving attainment rates of goal blood pressure in the short-to-medium term. In addition, studies are in progress to assess whether this technology could be a part of the solution to address the health care needs of an aging population and improve access for those suffering health inequalities. The variation in methods and systems used in these studies make generalizability to the general hypertension population difficult. Concerns over the reliability of technology, impact on patient quality of life, longer-term utility and cost–benefit analyses all need to be investigated further if wider adoption is to occur. PMID:24748801

Structural-Geometric Functionalization of the Additively Manufactured Prototype of Biomimetic Multispiked Connecting Ti-Alloy Scaffold for Entirely Noncemented Resurfacing Arthroplasty Endoprostheses

PubMed Central

Rogala, Piotr; Patalas, Adam

2017-01-01

The multispiked connecting scaffold (MSC-Scaffold) prototype, inspired by the biological system of anchorage of the articular cartilage in the periarticular trabecular bone by means of subchondral bone interdigitations, is the essential innovation in fixation of the bone in resurfacing arthroplasty (RA) endoprostheses. The biomimetic MSC‐Scaffold, due to its complex geometric structure, can be manufactured only using additive technology, for example, selective laser melting (SLM). The major purpose of this work is determination of constructional possibilities for the structural-geometric functionalization of SLM‐manufactured MSC‐Scaffold prototype, compensating the reduced ability—due to the SLM technological limitations—to accommodate the ingrowing bone filling the interspike space of the prototype, which is important for the prototype bioengineering design. Confocal microscopy scanning of components of the SLM‐manufactured prototype of total hip resurfacing arthroplasty (THRA) endoprosthesis with the MSC‐Scaffold was performed. It was followed by the geometric measurements of a variety of specimens designed as the fragments of the MSC-Scaffold of both THRA endoprosthesis components. The reduced ability to accommodate the ingrowing bone tissue in the SLM‐manufactured prototypes versus that in the corresponding CAD models has been quantitatively determined. Obtained results enabled to establish a way of compensatory structural‐geometric functionalization, allowing the MSC‐Scaffold adequate redesigning and manufacturing in additive SLM technology. PMID:28785159

The Concept of Ecologically Oriented Progress and Natural Resource Preservation

NASA Astrophysics Data System (ADS)

Gasanov, M. A.; Kolotov, K. A.; Demidenko, K. A.; Podgornaya, E. A.; Kadnikova, O. V.

2017-01-01

The most important issue of scientific and technological progress is considering the environment challenges of industrial development. It means that the progress must be ecologically oriented and environmentally friendly. The most adequate concept for the approach to the issue of “man - society - nature” relations is the ontology of the noosphere - the idea of a common space for human beings and nature. It presents an ideal example of an optimistic attitude towards the coordination between accelerating the scientific and technological development and natural resource saving. However, to maintain the balance between human needs and environmental processes determined by this concept, it is essential to include the lean production training into technological development of society.

Development of Fourier domain optical coherence tomography for applications in developmental biology

NASA Astrophysics Data System (ADS)

Davis, Anjul Maheshwari

Developmental biology is a field in which explorations are made to answer how an organism transforms from a single cell to a complex system made up of trillions of highly organized and highly specified cells. This field, however, is not just for discovery, it is crucial for unlocking factors that lead to diseases, defects, or malformations. The one key ingredient that contributes to the success of studies in developmental biology is the technology that is available for use. Optical coherence tomography (OCT) is one such technology. OCT fills a niche between the high resolution of confocal microscopy and deep imaging penetration of ultrasound. Developmental studies of the chicken embryo heart are of great interest. Studies in mature hearts, zebrafish animal models, and to a more limited degree chicken embryos, indicate a relationship between blood flow and development. It is believed that at the earliest stages, when the heart is still a tube, the purpose of blood flow is not for convective transport of oxygen, nutrients and waster, bur rather to induce shear-related gene expressions to induce further development. Yet, to this date, the simple question of "what makes blood flow?" has not been answered. This is mainly due limited availability to adequate imaging and blood flow measurement tools. Earlier work has demonstrated the potential of OCT for use in studying chicken embryo heart development, however quantitative measurement techniques still needed to be developed. In this dissertation I present technological developments I have made towards building an OCT system to study chick embryo heart development. I will describe: (1) a swept-source OCT with extended imaging depth; (2) a spectral domain OCT system for non-invasive small animal imaging; (3) Doppler flow imaging and techniques for quantitative blood flow measurement in living chicken embryos; and (4) application of the OCT system that was developed in the Specific Aims 2-5 to test hypotheses generated by a finite element model which treats the embryonic chick heart tube as a modified peristaltic pump.

Monitoring based maintenance utilizing actual stress sensory technology

NASA Astrophysics Data System (ADS)

Sumitro, Sunaryo; Kurokawa, Shoji; Shimano, Keiji; Wang, Ming L.

2005-06-01

In recent years, many infrastructures have been deteriorating. In order to maintain sustainability of those infrastructures which have significant influence on social lifelines, economical and rational maintenance management should be carried out to evaluate the life cycle cost (LCC). The development of structural health monitoring systems, such as deriving evaluation techniques for the field structural condition of existing structures and identification techniques for the significant engineering properties of new structures, can be considered as the first step in resolving the above problem. New innovative evaluation methods need to be devised to identify the deterioration of infrastructures, e.g. steel tendons, cables in cable-stayed bridges and strands embedded in pre- or post-tensioned concrete structures. One of the possible solutions that show 'AtoE' characteristics, i.e., (a)ccuracy, (b)enefit, (c)ompendiousness, (d)urability and (e)ase of operation, elasto-magnetic (EM) actual stress sensory technology utilizing the sensitivity of incremental magnetic permeability to stress change, has been developed. Numerous verification tests on various steel materials have been conducted. By comparing with load cell, strain gage and other sensory technology measurement results, the actual stresses of steel tendons in a pre-stressed concrete structure at the following stages have been thoroughly investigated: (i) pre-stress change due to set-loss (anchorage slippage) at the tendon fixation stage; (ii) pre-stress change due to the tendon relaxation stage; (iii) concrete creep and shrinkage at the long term pre-stressing stage; (iv) pre-stress change in the cyclic fatigue loading stage; and (v) pre-stress change due to the re-pre-stress setting stage. As the result of this testing, it is confirmed that EM sensory technology enables one to measure actual stress in steel wire, strands and steel bars precisely without destroying the polyethylene covering sheath and enables one to provide adequate accuracy and reliability for monitoring actual stresses of those steel tendons during the life cycle of infrastructures. An example of a field application at a cable-stayed bridge is described.

Technology Integration in a Science Classroom: Preservice Teachers' Perceptions

NASA Astrophysics Data System (ADS)

Rehmat, Abeera P.; Bailey, Janelle M.

2014-12-01

The challenge of preparing students for the information age has prompted administrators to increase technology in the public schools. Yet despite the increased availability of technology in schools, few teachers are integrating technology for instructional purposes. Preservice teachers must be equipped with adequate content knowledge of technology to create an advantageous learning experience in science classrooms. To understand preservice teachers' conceptions of technology integration, this research study explored 15 elementary science methods students' definitions of technology and their attitudes toward incorporating technology into their teaching. The phenomenological study took place in a science methods course that was based on a constructivist approach to teaching and learning science through science activities and class discussions, with an emphasis on a teacher beliefs framework. Data were collected throughout the semester, including an open-ended pre/post-technology integration survey, lesson plans, and reflections on activities conducted throughout the course. Through a qualitative analysis, we identified improvements in students' technology definitions, increased technology incorporation into science lesson plans, and favorable attitudes toward technology integration in science teaching after instruction. This research project demonstrates that positive changes in beliefs and behaviors relating to technology integration in science instruction among preservice teachers are possible through explicit instruction.

Portable microcontroller-based instrument for near-infrared spectroscopy

NASA Astrophysics Data System (ADS)

Giardini, Mario E.; Corti, Mario; Lago, Paolo; Gelmetti, Andrea

2000-05-01

Near IR Spectroscopy (NIRS) can be employed to noninvasively and continuously measure in-vivo local changes in haemodynamics and oxygenation of human tissues. In particular, the technique can be particularly useful for muscular functional monitoring. We present a portable NIRS research-grade acquisition system prototype, strictly dedicate to low-noise measurements during muscular exercise. The prototype is able to control four LED sources and a detector. Such a number of sources allows for multipoint measurements or for multi-wavelength spectroscopy of tissue constituents other than oxygen, such as cytochrome aa3 oxidation. The LEDs and the detector are mounted on separate probes, which carry also the relevant drivers and preamplifiers. By employing surface-mount technologies, probe size and weight are kept to a minimum. A single-chip mixed-signal RISC microcontroller performs source-to- detector multiplexing with a digital correlation technique. The acquired data are stored on an on-board 64 K EEPROM bank, and can be subsequently uploaded to a personal computer via serial port for further analysis. The resulting instrument is compact and lightweight. Preliminary test of the prototype on oxygen consumption during tourniquet- induced forearm ischaemia show adequate detectivity and time response.

Computer-assisted generation of individual training concepts for advanced education in manufacturing metrology

NASA Astrophysics Data System (ADS)

Werner, Teresa; Weckenmann, Albert

2010-05-01

Due to increasing requirements on the accuracy and reproducibility of measurement results together with a rapid development of novel technologies for the execution of measurements, there is a high demand for adequately qualified metrologists. Accordingly, a variety of training offers are provided by machine manufacturers, universities and other institutions. Yet, for an interested learner it is very difficult to define an optimal training schedule for his/her individual demands. Therefore, a computer-based assistance tool is developed to support a demand-responsive scheduling of training. Based on the difference between the actual and intended competence profile and under consideration of amending requirements, an optimally customized qualification concept is derived. For this, available training offers are categorized according to different dimensions: regarding contents of the course, but also intended target groups, focus of the imparted competences, implemented methods of learning and teaching, expected constraints for learning and necessary preknowledge. After completing a course, the achieved competences and the transferability of gathered knowledge are evaluated. Based on the results, recommendations for amending measures of learning are provided. Thus, a customized qualification for manufacturing metrology is facilitated, adapted to the specific needs and constraints of each individual learner.

Is 50 Hz high enough ECG sampling frequency for accurate HRV analysis?

PubMed

Mahdiani, Shadi; Jeyhani, Vala; Peltokangas, Mikko; Vehkaoja, Antti

2015-01-01

With the worldwide growth of mobile wireless technologies, healthcare services can be provided at anytime and anywhere. Usage of wearable wireless physiological monitoring system has been extensively increasing during the last decade. These mobile devices can continuously measure e.g. the heart activity and wirelessly transfer the data to the mobile phone of the patient. One of the significant restrictions for these devices is usage of energy, which leads to requiring low sampling rate. This article is presented in order to investigate the lowest adequate sampling frequency of ECG signal, for achieving accurate enough time domain heart rate variability (HRV) parameters. For this purpose the ECG signals originally measured with high 5 kHz sampling rate were down-sampled to simulate the measurement with lower sampling rate. Down-sampling loses information, decreases temporal accuracy, which was then restored by interpolating the signals to their original sampling rates. The HRV parameters obtained from the ECG signals with lower sampling rates were compared. The results represent that even when the sampling rate of ECG signal is equal to 50 Hz, the HRV parameters are almost accurate with a reasonable error.

Measuring energy expenditure in clinical populations: rewards and challenges

PubMed Central

Psota, T; Chen, KY

2013-01-01

The measurement of energy expenditure (EE) is recommended as an important component of comprehensive clinical nutrition assessments in patients with altered metabolic states, who failed to respond to nutrition support and with critical illness that require individualized nutrition support. There is evidence that EE is variable in patients with metabolic diseases, such as chronic renal disease, cirrhosis, HIV, cancer cachexia, cystic fibrosis and patients under intensive care. By using appropriate techniques and interpretations of basal or resting EE, clinicians can facilitate the adequate nutrition support with minimum negative impacts from under- or overfeeding in these patients. This review is based on our current understanding of the different components of EE and the techniques to measure them, and to re-examine advances and challenges to determine energy needs in clinical populations with more focuses on the obese, pediatric and elderly patients. In addition, technological advances have expanded the choices of market-available equipments for assessing EE, which also bring specific challenges and rewards in selecting the right equipment with specific performance criteria. Lastly, analytical considerations of interpreting the results of EE in the context of changing body composition are presented and discussed. PMID:23443826

Design VHF Antennas for Space Borne Receivers for SmallSats

NASA Technical Reports Server (NTRS)

Deshpande, Manohar

2017-01-01

Space borne microwave remote sensors at VHF/UHF frequencies are important instruments to observe reflective properties of land surfaces through thick and heavy forestation on a global scale. One of the most cost effective ways of measuring land reflectivity at VHF/UHF frequencies is to use signals transmitted by existing communication satellites (operating at VHF/UHF band) as a signal of opportunity (SoOp) signal and passive receivers integrated with airborne/space borne platforms operating in the Low Earth Orbit (LEO). One of the critical components of the passive receiver is two antennas (one to receive only direct signal and other to receive only reflected signal) which need to have ideally high (>30dB) isolation. However, because of small size of host platforms and broad beam width of dipole antennas, achieving adequate isolation between two channels is a challenging problem and need to be solved for successful implementation of space borne SoOp technology for remote sensing. In this presentation a novel enabling VHF antenna technology for Cubesat platforms is presented to receive direct as well as reflected signal with needed isolation. The novel scheme also allows enhancing the gain of individual channels by factor of 2 without use of reflecting ground plane.

Posture variation among office workers when using different information and communication technologies at work and away from work.

PubMed

Ciccarelli, Marina; Straker, Leon; Mathiassen, Svend Erik; Pollock, Clare

2014-01-01

Office workers perform tasks using different information and communication technologies (ICT) involving various postures. Adequate variation in postures and muscle activity is generally believed to protect against musculoskeletal complaints, but insufficient information exists regarding the effect on postural variation of using different ICT. Thus, this study among office workers aimed to determine and compare postures and postural variation associated with using distinct types of ICT. Upper arm, head and trunk postures of 24 office workers were measured with the Physiometer over a whole day in their natural work and away-from-work environments. Postural variation was quantified using two indices: APDF(90-10) and EVA(sd). Various ICT had different postural means and variation. Paper-based tasks had more non-neutral, yet also more variable postures. Electronics-based tasks had more neutral postures, with less postural variability. Tasks simultaneously using paper- and electronics-based ICT had least neutral and least variable postures. Tasks without ICT usually had the most posture variability. Interspersing tasks involving different ICT could increase overall exposure variation among office workers and may thus contribute to musculoskeletal risk reduction.

Mobile TNA system to detect explosives and drugs concealed in cars and trucks

NASA Astrophysics Data System (ADS)

Bendahan, Joseph; Gozani, Tsahi

1998-12-01

The drug problem in the U.S. is serious and efforts to fight it are constrained by the lack of adequate means to curb the inflow of smuggled narcotics into the country through cargo containers. Also, events such as the disastrous explosion in Oklahoma City, the IRA bombing in London, and the bombing of the U.S. military residence in Dharan make the development of new tools for the detection of explosives and drugs in vehicles imperative. Thermal neutron analysis (TNA) technology, developed for the detection of explosives in suitcases, and detection of landmines and unexploded ordnance is presently being applied to the nonintrusive detection of significant amounts of explosives and drugs concealed in cars, trucks and large cargo containers. TNA technology is based on the analysis of characteristic gamma rays emitted following thermal neutron capture. A TNA system can be used in a variety of operational scenarios, such as inspection before an unloaded cargo container from a spit is moved to temporary storage, inspection of trucks unloaded from a ferry, or inspection of vehicles parked close to Federal building or military bases. This paper will discuss the detection process and operational scenarios, and will present results from recent simulations and measurements.

Orbital construction demonstration study. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1977-01-01

A conceptual design and program plan for an Orbital Construction Demonstration Article (OCDA), that can be used for technology growth and verification, and as the construction facility for a variety of large structures is presented. The OCDA design includes a large work platform, a rotating manipulator boom, a 250 kw solar array, and a core module of subsystems with a total mass of 37,093 kg, that can be assembled in three shuttle flights. An analysis of OCDA continued utility potential indicates that a shuttle tended platform with 250 kW of power can effectively be used to construct highly beneficial antenna systems and large demonstration articles that advance solar power satellite technologies. The construction of 100 m parabolic reflectors for use as a radiometer for measuring soil moisture and water salinity was found to be within the capabilities of OCDA concept. With 252 fixed beams for high population centers, and 16 scanning beams for rural areas, the antenna has the potential to significantly improve U.S. space based communications systems. The OCDA, that is slightly increased in size, was found adequate to build a large 2 MW solar array which, when coupled to a transmit antenna, demonstrate power transfer from space to ground.

Clinical Application of Mesenchymal Stem Cells and Novel Supportive Therapies for Oral Bone Regeneration

PubMed Central

O'Valle, Francisco; Lanis, Alejandro; Dohan Ehrenfest, David M.; Wang, Hom-Lay; Galindo-Moreno, Pablo

2015-01-01

Bone regeneration is often needed prior to dental implant treatment due to the lack of adequate quantity and quality of the bone after infectious diseases, trauma, tumor, or congenital conditions. In these situations, cell transplantation technologies may help to overcome the limitations of autografts, xenografts, allografts, and alloplastic materials. A database search was conducted to include human clinical trials (randomized or controlled) and case reports/series describing the clinical use of mesenchymal stem cells (MSCs) in the oral cavity for bone regeneration only specifically excluding periodontal regeneration. Additionally, novel advances in related technologies are also described. 190 records were identified. 51 articles were selected for full-text assessment, and only 28 met the inclusion criteria: 9 case series, 10 case reports, and 9 randomized controlled clinical trials. Collectively, they evaluate the use of MSCs in a total of 290 patients in 342 interventions. The current published literature is very diverse in methodology and measurement of outcomes. Moreover, the clinical significance is limited. Therefore, the use of these techniques should be further studied in more challenging clinical scenarios with well-designed and standardized RCTs, potentially in combination with new scaffolding techniques and bioactive molecules to improve the final outcomes. PMID:26064899

ALDO: A radiation-tolerant, low-noise, adjustable low drop-out linear regulator in 0.35 μm CMOS technology

NASA Astrophysics Data System (ADS)

Carniti, P.; Cassina, L.; Gotti, C.; Maino, M.; Pessina, G.

2016-07-01

In this work we present ALDO, an adjustable low drop-out linear regulator designed in AMS 0.35 μm CMOS technology. It is specifically tailored for use in the upgraded LHCb RICH detector in order to improve the power supply noise for the front end readout chip (CLARO). ALDO is designed with radiation-tolerant solutions such as an all-MOS band-gap voltage reference and layout techniques aiming to make it able to operate in harsh environments like High Energy Physics accelerators. It is capable of driving up to 200 mA while keeping an adequate power supply filtering capability in a very wide frequency range from 10 Hz up to 100 MHz. This property allows us to suppress the noise and high frequency spikes that could be generated by a DC/DC regulator, for example. ALDO also shows a very low noise of 11.6 μV RMS in the same frequency range. Its output is protected with over-current and short detection circuits for a safe integration in tightly packed environments. Design solutions and measurements of the first prototype are presented.

Influence of gender of the teaching staff on students' acceptance of a virtual implant planning course.

PubMed

Nkenke, Emeka; Vairaktaris, Elefterios; Schaller, Hans-Günter; Perisanidis, Christos; Eitner, Stephan

2017-05-01

Acceptance of new technology is influenced by a number of situational and social factors. So far, only limited data are available on the influence of the teaching staff's gender on the acceptance of virtual dental implant planning by students. This study aimed at assessing the influence of the teaching staff's gender on the acceptance of a virtual implant planning course by male and female undergraduate dental students and their general attitude toward implantology. Two groups of third-year dental students (group 1, 9 males, 22 females; group 2, 12 males, 20 females) attended a virtual dental implant planning course. For the first group the teaching staff was all-male, while the teaching staff was all-female for the second group. After completion of the course the students filled in a technology acceptance questionnaire. An all-female teaching staff led to a degree of technology acceptance that did not differ significantly for male and female students. When the teaching staff was all-male, significant differences for technology acceptance occurred between male and female students. However, male as well as female students attributed the practice of implantology to both genders of dentists, equally, without statistically significant difference independent of the gender of the teaching staff. The more evenly distributed degree of technology acceptance of students of both genders being taught by a female staff is a favorable effect which may be explained by the more egalitarian style of women. Therefore, while feminization in dentistry proceeds, adequate measures should be taken to increase the number of female teachers. Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Fiber-Optic Strain Gauge With High Resolution And Update Rate

NASA Technical Reports Server (NTRS)

Figueroa, Fernando; Mahajan, Ajay; Sayeh, Mohammad; Regez, Bradley

2007-01-01

An improved fiber-optic strain gauge is capable of measuring strains in the approximate range of 0 to 50 microstrains with a resolution of 0.1 microstrain. (To some extent, the resolution of the strain gauge can be tailored and may be extensible to 0.01 microstrain.) The total cost of the hardware components of this strain gauge is less than $100 at 2006 prices. In comparison with prior strain gauges capable of measurement of such low strains, this strain gauge is more accurate, more economical, and more robust, and it operates at a higher update rate. Strain gauges like this one are useful mainly for measuring small strains (including those associated with vibrations) in such structures as rocket test stands, buildings, oilrigs, bridges, and dams. The technology was inspired by the need to measure very small strains on structures supporting liquid oxygen tanks, as a way to measure accurately mass of liquid oxygen during rocket engine testing. This improved fiber-optic strain gauge was developed to overcome some of the deficiencies of both traditional foil strain gauges and prior fiber-optic strain gauges. Traditional foil strain gages do not have adequate signal-to-noise ratios at such small strains. Fiber-optic strain gauges have been shown to be potentially useful for measuring such small strains, but heretofore, the use of fiberoptic strain gauges has been inhibited, variously, by complexity, cost, or low update rate.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schonewill, Philip P.; Berglin, Eric J.; Boeringa, Gregory K.

At the request of the U.S. Department of Energy Office of River Protection, Pacific Northwest National Laboratory (PNNL) conducted a scoping study to investigate supplemental technologies for supplying vertical fluid motion and enhanced mixing in Waste Treatment and Immobilization Plant (WTP) vessels designed for high solids processing. The study assumed that the pulse jet mixers adequately mix and shear the bottom portion of a vessel. Given that, the primary function of a supplemental technology should be to provide mixing and shearing in the upper region of a vessel. The objective of the study was to recommend a mixing technology andmore » configuration that could be implemented in the 8-ft test vessel located at Mid-Columbia Engineering (MCE). Several mixing technologies, primarily airlift circulator (ALC) systems, were evaluated in the study. This technical report contains a review of ALC technologies, a description of the PNNL testing and accompanying results, and recommended features of an ALC system for further study.« less

NASA's Role in Aeronautics: A Workshop. Volume 4: General aviation

NASA Technical Reports Server (NTRS)

1981-01-01

A substantially improved flow of new technology is imperative if the general aviation industry is to maintain a strong world position. Although NASA is the most eminently suited entity available to carry out the necessary research and technology development effort because of its facilities, expertise, and endorsement by the aircraft industry, less than 3% of its aeronautical R&T budget is devoted to general aviation aeronautics. It is recommended that (1) a technology program, particularly one that focuses on improving fuel efficienty and safety, be aggressively pursued by NASA; (2) NASA be assigned the role of leading basic research technology effort in general aviation up through technology demonstration; (3) a strategic plan be developed by NASA, in cooperation with the industry, and implemented in time for the 1982 budget cycle; and (4) a NASA R&T budget be allocated for general aviation adequate to support the proposed plan.

Technologies to Support Community-Dwelling Persons With Dementia: A Position Paper on Issues Regarding Development, Usability, Effectiveness and Cost-Effectiveness, Deployment, and Ethics

PubMed Central

Innes, Anthea; Mountain, Gail; Robinson, Louise; van der Roest, Henriëtte; García-Casal, J Antonio; Gove, Dianne; Thyrian, Jochen René; Evans, Shirley; Dröes, Rose-Marie; Kelly, Fiona; Kurz, Alexander; Casey, Dympna; Szcześniak, Dorota; Dening, Tom; Craven, Michael P; Span, Marijke; Felzmann, Heike; Tsolaki, Magda; Franco-Martin, Manuel

2017-01-01

Background With the expected increase in the numbers of persons with dementia, providing timely, adequate, and affordable care and support is challenging. Assistive and health technologies may be a valuable contribution in dementia care, but new challenges may emerge. Objective The aim of our study was to review the state of the art of technologies for persons with dementia regarding issues on development, usability, effectiveness and cost-effectiveness, deployment, and ethics in 3 fields of application of technologies: (1) support with managing everyday life, (2) support with participating in pleasurable and meaningful activities, and (3) support with dementia health and social care provision. The study also aimed to identify gaps in the evidence and challenges for future research. Methods Reviews of literature and expert opinions were used in our study. Literature searches were conducted on usability, effectiveness and cost-effectiveness, and ethics using PubMed, Embase, CINAHL, and PsycINFO databases with no time limit. Selection criteria in our selected technology fields were reviews in English for community-dwelling persons with dementia. Regarding deployment issues, searches were done in Health Technology Assessment databases. Results According to our results, persons with dementia want to be included in the development of technologies; there is little research on the usability of assistive technologies; various benefits are reported but are mainly based on low-quality studies; barriers to deployment of technologies in dementia care were identified, and ethical issues were raised by researchers but often not studied. Many challenges remain such as including the target group more often in development, performing more high-quality studies on usability and effectiveness and cost-effectiveness, creating and having access to high-quality datasets on existing technologies to enable adequate deployment of technologies in dementia care, and ensuring that ethical issues are considered an important topic for researchers to include in their evaluation of assistive technologies. Conclusions Based on these findings, various actions are recommended for development, usability, effectiveness and cost-effectiveness, deployment, and ethics of assistive and health technologies across Europe. These include avoiding replication of technology development that is unhelpful or ineffective and focusing on how technologies succeed in addressing individual needs of persons with dementia. Furthermore, it is suggested to include these recommendations in national and international calls for funding and assistive technology research programs. Finally, practitioners, policy makers, care insurers, and care providers should work together with technology enterprises and researchers to prepare strategies for the implementation of assistive technologies in different care settings. This may help future generations of persons with dementia to utilize available and affordable technologies and, ultimately, to benefit from them. PMID:28582262

Field trial of a synthetic tsetse-repellent technology developed for the control of bovine trypanosomosis in Kenya.

PubMed

Bett, B; Randolph, T F; Irungu, P; Nyamwaro, S O; Kitala, P; Gathuma, J; Grace, D; Vale, G; Hargrove, J; McDermott, J

2010-12-01

We conducted a field trial among Maasai cattle-keepers in Nkuruman and Nkineji areas of Kenya to evaluate the effectiveness of a synthetic tsetse-repellent technology developed for the control of trypanosomosis in cattle. The technology was a repellent (2-methoxy 4-methylphenol) emitted from dispensers attached to collars worn by cattle. Treatment was allocated at the herd level to ensure adequate protection of all the animals in a herd, with measurements of effectiveness conducted at the individual-animal level. The trial began in April 2005 and ran for 16 months including a baseline phase of 4 months. We recruited 12 herds in each area using a restricted random-sampling technique and distributed them equally into intervention (repellent) and control groups. Sample size was determined using a formal power calculation. Effectiveness or minimal worthwhile difference was defined as a 50% reduction in the incidence of trypanosome infection in the treated versus control group (effectiveness below which the technology was considered by experts as not viable compared to existing control techniques). All the animals in the recruited herds were screened monthly (buffy-coat technique) for trypanosome infections. The analysis followed the principle of intention-to-treat by which subjects are analysed according to their initial treatment assignment, regardless of the mechanical performance of the device. Crude and adjusted effects of the technology were 23% (p<0.001) and 18% (p=0.08) reduction in the infection incidence in the treatment compared to the control groups, respectively. The impact of the technology estimated in this study did not achieve the threshold of 50% reduction in the trypanosome infection incidence set a priori to indicate effectiveness (p<0.001). We therefore concluded that the prototype repellent technology package was not sufficiently effective in reducing trypanosome infection incidence under natural tsetse challenge to merit commercial development. Copyright © 2010 Elsevier B.V. All rights reserved.

Early economic evaluation of emerging health technologies: protocol of a systematic review

PubMed Central

2014-01-01

Background The concept of early health technology assessment, discussed well over a decade, has now been collaboratively implemented by industry, government, and academia to select and expedite the development of emerging technologies that may address the needs of patients and health systems. Early economic evaluation is essential to assess the value of emerging technologies, but empirical data to inform the current practice of early evaluation is limited. We propose a systematic review of early economic evaluation studies in order to better understand the current practice. Methods/design This protocol describes a systematic review of economic evaluation studies of regulated health technologies in which the evaluation is conducted prior to regulatory approval and when the technology effectiveness is not well established. Included studies must report an economic evaluation, defined as the comparative analysis of alternatives with respect to their associated costs and health consequences, and must evaluate some regulated health technology such as pharmaceuticals, biologics, high-risk medical devices, or biomarkers. We will conduct the literature search on multiple databases, including MEDLINE, EMBASE, the Centre for Reviews and Dissemination Databases, and EconLit. Additional citations will be identified via scanning reference lists and author searching. We suspect that many early economic evaluation studies are unpublished, especially those conducted for internal use only. Additionally, we use a chain-referral sampling approach to identify authors of unpublished studies who work in technology discovery and development, starting out with our contact lists and authors who published relevant studies. Citation screening and full-text review will be conducted by pairs of reviewers. Abstracted data will include those related to the decision context and decision problem of the early evaluation, evaluation methods (e.g., data sources, methods, and assumptions used to identify, measure, and value the likely effectiveness and the costs and consequences of the new technology, handling of uncertainty), and whether the study results adequately address the main study question or objective. Data will be summarized overall and stratified by publication status. Discussion This study is timely to inform early economic evaluation practice, given the international trend in early health technology assessment initiatives. PMID:25055987

Early economic evaluation of emerging health technologies: protocol of a systematic review.

PubMed

Pham, Ba'; Tu, Hong Anh Thi; Han, Dolly; Pechlivanoglou, Petros; Miller, Fiona; Rac, Valeria; Chin, Warren; Tricco, Andrea C; Paulden, Mike; Bielecki, Joanna; Krahn, Murray

2014-07-23

The concept of early health technology assessment, discussed well over a decade, has now been collaboratively implemented by industry, government, and academia to select and expedite the development of emerging technologies that may address the needs of patients and health systems. Early economic evaluation is essential to assess the value of emerging technologies, but empirical data to inform the current practice of early evaluation is limited. We propose a systematic review of early economic evaluation studies in order to better understand the current practice. This protocol describes a systematic review of economic evaluation studies of regulated health technologies in which the evaluation is conducted prior to regulatory approval and when the technology effectiveness is not well established. Included studies must report an economic evaluation, defined as the comparative analysis of alternatives with respect to their associated costs and health consequences, and must evaluate some regulated health technology such as pharmaceuticals, biologics, high-risk medical devices, or biomarkers. We will conduct the literature search on multiple databases, including MEDLINE, EMBASE, the Centre for Reviews and Dissemination Databases, and EconLit. Additional citations will be identified via scanning reference lists and author searching. We suspect that many early economic evaluation studies are unpublished, especially those conducted for internal use only. Additionally, we use a chain-referral sampling approach to identify authors of unpublished studies who work in technology discovery and development, starting out with our contact lists and authors who published relevant studies. Citation screening and full-text review will be conducted by pairs of reviewers. Abstracted data will include those related to the decision context and decision problem of the early evaluation, evaluation methods (e.g., data sources, methods, and assumptions used to identify, measure, and value the likely effectiveness and the costs and consequences of the new technology, handling of uncertainty), and whether the study results adequately address the main study question or objective. Data will be summarized overall and stratified by publication status. This study is timely to inform early economic evaluation practice, given the international trend in early health technology assessment initiatives.

76 FR 4584 - Approval and Promulgation of Air Quality Implementation Plans; Georgia; Disapproval of Interstate...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-26

... conclusion must be supported by an adequate technical analysis. Second, EPA recommended the various types of... requirement of section 110(a)(2)(D)(i)(I) must be supported by an adequate technical analysis. Additionally... evaluate or demonstrate with a technical analysis that this measure and their intention to rely to the...

DOE perspective on fuel cells in transportation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kost, R.

1996-04-01

Fuel cells are one of the most promising technologies for meeting the rapidly growing demand for transportation services while minimizing adverse energy and environmental impacts. This paper reviews the benefits of introducing fuel cells into the transportation sector; in addition to dramatically reduced vehicle emissions, fuel cells offer the flexibility than use petroleum-based or alternative fuels, have significantly greater energy efficiency than internal combustion engines, and greatly reduce noise levels during operation. The rationale leading to the emphasis on proton-exchange-membrane fuel cells for transportation applications is reviewed as are the development issues requiring resolution to achieve adequate performance, packaging, andmore » cost for use in automobiles. Technical targets for power density, specific power, platinum loading on the electrodes, cost, and other factors that become increasingly more demanding over time have been established. Fuel choice issues and pathways to reduced costs and to a renewable energy future are explored. One such path initially introduces fuel cell vehicles using reformed gasoline while-on-board hydrogen storage technology is developed to the point of allowing adequate range (350 miles) and refueling convenience. This scenario also allows time for renewable hydrogen production technologies and the required supply infrastructure to develop. Finally, the DOE Fuel Cells in Transportation program is described. The program, whose goal is to establish the technology for fuel cell vehicles as rapidly as possible, is being implemented by means of the United States Fuel Cell Alliance, a Government-industry alliance that includes Detroit`s Big Three automakers, fuel cell and other component suppliers, the national laboratories, and universities.« less

[University-external sector linkage: a managerial strategy].

PubMed

Campos, Gilberto

2004-06-01

The University-External Sector vinculation is an increasing phenomenon in Latin America as in the rest of the world. The universities through its investigation processes actively participate in the creation and incorporation of science and technology to produce technological processes, to bring foreign technology into national reality, and also to create and transmit innovation for the productive sector. In those ways these institutions achieve bonds with the external sector which provide them with additional income and allows them to have certain relief for their tight teaching and investigation budgets. Several studies in university organizations have been made to identify the motivations and barriers for de adequate development of the interaction between the university and the external sector. The lack of vinculation between these institutions could be due in part to the lack of knowledge that the external sector has of the possibility to obtain services from the university, and also the lack of knowledge that the university has about the needs of potential users of their services. The goals achieved by public Venezuelan universities, in the last years, in their search of a vinculation with the external sector could grow and consolidate through an adequate strategic management plan that allows a mayor diffusion and promotion of the results of their investigations and services, to reach in a wider and more direct way, and to a greater number of potential clients.

Agility assessment using fuzzy logic approach: a case of healthcare dispensary.

PubMed

Suresh, M; Patri, Rojalin

2017-06-09

Agile concepts are not only beneficial for manufacturing sector but also for service sector such as healthcare. However, assessment of agility has been predominantly done in manufacturing enterprises. This study demonstrates a means to measure agility of a healthcare organization by assessing agility of a university dispensary. Its contribution to the knowledge base is twofold. First, it proposes a means to measure the agility of a healthcare organization and second, it identifies the attributes that prevent agile performance and outlines the suggestive measure to enhance its agile capabilities. A case study approach has been adopted and fuzzy logic has been employed to measure the agility of the case dispensary. At first, the measures of assessment which include four enablers, fifteen criteria and forty-five attributes have been identified from the literature and rated by the experts indicating the importance of the measures in the assessment. Then, the case dispensary has been assessed on those measures by collecting observed performance rating from decision makers. At last, Fuzzy logic has been applied on the performance rating data to analyze and interpret the agile capability of the dispensary. The findings suggest that transparent information flow, adequate salary and bonuses for caregivers, reading error in medical descriptions, in house/nearby pathology laboratory services, technical up-gradation of dispensary equipments and facilities, minimization of patient throughput time and adequate training programme for safety practices are the attributes that weakens agile capability of the University dispensary. The current agility of the dispensary was found to be 'Agile' which is average in relation to the agility labels. Attributes such as transparent information flow, adequate salary and bonuses for caregivers, elimination of reading error in medical descriptions, in house/nearby pathology laboratory services, technical up-gradation of dispensary equipments and facilities, minimization of patient throughput time and adequate training programme for safety practices are extremely crucial for enhancing agile capability of a healthcare organization.

Effects of Orbit and Pointing Geometry of a Spaceborne Formation for Monostatic-Bistatic Radargrammetry on Terrain Elevation Measurement Accuracy

PubMed Central

Renga, Alfredo; Moccia, Antonio

2009-01-01

During the last decade a methodology for the reconstruction of surface relief by Synthetic Aperture Radar (SAR) measurements – SAR interferometry – has become a standard. Different techniques developed before, such as stereo-radargrammetry, have been experienced from space only in very limiting geometries and time series, and, hence, branded as less accurate. However, novel formation flying configurations achievable by modern spacecraft allow fulfillment of SAR missions able to produce pairs of monostatic-bistatic images gathered simultaneously, with programmed looking angles. Hence it is possible to achieve large antenna separations, adequate for exploiting to the utmost the stereoscopic effect, and to make negligible time decorrelation, a strong liming factor for repeat-pass stereo-radargrammetric techniques. This paper reports on design of a monostatic-bistatic mission, in terms of orbit and pointing geometry, and taking into account present generation SAR and technology for accurate relative navigation. Performances of different methods for monostatic-bistatic stereo-radargrammetry are then evaluated, showing the possibility to determine the local surface relief with a metric accuracy over a wide range of Earth latitudes. PMID:22389594

Development of improved space sampling strategies for ocean chemical properties: Total carbon dioxide and dissolved nitrate

NASA Technical Reports Server (NTRS)

Goyet, Catherine; Davis, Daniel; Peltzer, Edward T.; Brewer, Peter G.

1995-01-01

Large-scale ocean observing programs such as the Joint Global Ocean Flux Study (JGOFS) and the World Ocean Circulation Experiment (WOCE) today, must face the problem of designing an adequate sampling strategy. For ocean chemical variables, the goals and observing technologies are quite different from ocean physical variables (temperature, salinity, pressure). We have recently acquired data on the ocean CO2 properties on WOCE cruises P16c and P17c that are sufficiently dense to test for sampling redundancy. We use linear and quadratic interpolation methods on the sampled field to investigate what is the minimum number of samples required to define the deep ocean total inorganic carbon (TCO2) field within the limits of experimental accuracy (+/- 4 micromol/kg). Within the limits of current measurements, these lines were oversampled in the deep ocean. Should the precision of the measurement be improved, then a denser sampling pattern may be desirable in the future. This approach rationalizes the efficient use of resources for field work and for estimating gridded (TCO2) fields needed to constrain geochemical models.

Crosswords to computers: a critical review of popular approaches to cognitive enhancement.

PubMed

Jak, Amy J; Seelye, Adriana M; Jurick, Sarah M

2013-03-01

Cognitive enhancement strategies have gained recent popularity and have the potential to benefit clinical and non-clinical populations. As technology advances and the number of cognitively healthy adults seeking methods of improving or preserving cognitive functioning grows, the role of electronic (e.g., computer and video game based) cognitive training becomes more relevant and warrants greater scientific scrutiny. This paper serves as a critical review of empirical evaluations of publically available electronic cognitive training programs. Many studies have found that electronic training approaches result in significant improvements in trained cognitive tasks. Fewer studies have demonstrated improvements in untrained tasks within the trained cognitive domain, non-trained cognitive domains, or on measures of everyday function. Successful cognitive training programs will elicit effects that generalize to untrained, practical tasks for extended periods of time. Unfortunately, many studies of electronic cognitive training programs are hindered by methodological limitations such as lack of an adequate control group, long-term follow-up and ecologically valid outcome measures. Despite these limitations, evidence suggests that computerized cognitive training has the potential to positively impact one's sense of social connectivity and self-efficacy.

Detection of early changes in lung cell cytology by flow-systems analysis techniques, July 1--December 31, 1975

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steinkamp, J.A.; Ingram, M.; Hansen, K.M.

1976-03-01

This report summarizes results of preliminary experiments to demonstrate the feasibility of using automated flow-systems analysis in detecting early changes of respiratory epithelium exposed to physical and chemical agents associated with the by-products of nonnuclear energy production. The Syrian hamster was selected as the experimental test animal to begin investigation of the effects of toxic agents to cells of the respiratory tract. Since initiation of the program approximately six months ago, the goals have been acquisition of adequate numbers of exfoliated cells from the lung; adaptation of cytological techniques developed on human exfoliated gynecological samples to hamster lung epithelium formore » obtaining single-cell suspensions; utilization of existing cell staining methods to measure DNA content in lung cells; and analysis of DNA content and cell size. As the flow-system cell analysis technology is adapted to the measurement of exfoliated lung cells, rapid and quantitative determination of early changes in the physical and biochemical cellular properties will be attempted as a function of exposure to the toxic agents. (auth)« less

Evidence for magnetic Weyl fermions in a correlated metal

NASA Astrophysics Data System (ADS)

Kuroda, K.; Tomita, T.; Suzuki, M.-T.; Bareille, C.; Nugroho, A. A.; Goswami, P.; Ochi, M.; Ikhlas, M.; Nakayama, M.; Akebi, S.; Noguchi, R.; Ishii, R.; Inami, N.; Ono, K.; Kumigashira, H.; Varykhalov, A.; Muro, T.; Koretsune, T.; Arita, R.; Shin, S.; Kondo, Takeshi; Nakatsuji, S.

2017-11-01

Weyl fermions have been observed as three-dimensional, gapless topological excitations in weakly correlated, inversion-symmetry-breaking semimetals. However, their realization in spontaneously time-reversal-symmetry-breaking phases of strongly correlated materials has so far remained hypothetical. Here, we report experimental evidence for magnetic Weyl fermions in Mn3Sn, a non-collinear antiferromagnet that exhibits a large anomalous Hall effect, even at room temperature. Detailed comparison between angle-resolved photoemission spectroscopy (ARPES) measurements and density functional theory (DFT) calculations reveals significant bandwidth renormalization and damping effects due to the strong correlation among Mn 3d electrons. Magnetotransport measurements provide strong evidence for the chiral anomaly of Weyl fermions--namely, the emergence of positive magnetoconductance only in the presence of parallel electric and magnetic fields. Since weak magnetic fields (approximately 10 mT) are adequate to control the distribution of Weyl points and the large fictitious fields (equivalent to approximately a few hundred T) produced by them in momentum space, our discovery lays the foundation for a new field of science and technology involving the magnetic Weyl excitations of strongly correlated electron systems such as Mn3Sn.

Importance of accurately assessing biomechanics of the cornea.

PubMed

Roberts, Cynthia J

2016-07-01

This article summarizes the state-of-the-art in clinical corneal biomechanics, including procedures in which biomechanics play a role, and the clinical consequences in terms of error in estimating intraocular pressure (IOP). Corneal biomechanical response to refractive surgery can be categorized into either stable alteration of surface shape and thus visual outcome, or unstable biomechanical decompensation. The stable response is characterized by central flattening and peripheral steepening that is potentiated in a stiffer cornea. Two clinical devices for assessing corneal biomechanics do not yet measure classic biomechanical properties, but rather provide assessment of corneal deformation response. Biomechanical parameters are a function of IOP, and both the cornea and sclera become stiffer as IOP increases. Any assessment of biomechanical parameters must include IOP, and one value of stiffness does not adequately characterize a cornea. Corneal biomechanics plays a role in the outcomes of any procedure in which lamellae are transected. Once the corneal structure has been altered in a manner that includes central thinning, IOP measurements with applanation tonometry are likely not valid, and other technologies should be used.

Towards an implantable bio-sensor platform for continuous real-time monitoring of anti-epileptic drugs.

PubMed

Hammoud, Abbas; Chamseddine, Ahmad; Nguyen, Dang K; Sawan, Mohamad

2016-08-01

The need of continuous real-time monitoring device for in-vivo drug level detection has been widely articulated lately. Such monitoring could guide drug posology and timing of intake, detect low or high drug levels, in order to take adequate measures, and give clinicians a valuable window into patients' health and their response to therapeutics. This paper presents a novel implantable bio-sensor based on impedance measurement capable of continuously monitoring various antiepileptic drug levels. This portable point-of-care microsystem replaces large and stationary conventional macrosystems, and is a one of a kind system designed with an array of electrodes to monitor various anti-epileptic drugs rather than one drug. The micro-system consists of (i) the front-end circuit including an inductive coil to receive energy from an external base station, and to exchange data with the latter; (ii) the power management block; (iii) the readout and control block; and (iv) the biosensor array. The electrical circuitry was designed using the 0.18-um CMOS process technology intended to be miniature and consume ultra-low power.

Smartphones Offer New Opportunities in Clinical Voice Research.

PubMed

Manfredi, C; Lebacq, J; Cantarella, G; Schoentgen, J; Orlandi, S; Bandini, A; DeJonckere, P H

2017-01-01

Smartphone technology provides new opportunities for recording standardized voice samples of patients and sending the files by e-mail to the voice laboratory. This drastically improves the collection of baseline data, as used in research on efficiency of voice treatments. However, the basic requirement is the suitability of smartphones for recording and digitizing pathologic voices (mainly characterized by period perturbations and noise) without significant distortion. In this experiment, two smartphones (a very inexpensive one and a high-level one) were tested and compared with direct microphone recordings in a soundproof room. The voice stimuli consisted in synthesized deviant voice samples (median of fundamental frequency: 120 and 200 Hz) with three levels of jitter and three levels of added noise. All voice samples were analyzed using PRAAT software. The results show high correlations between jitter, shimmer, and noise-to-harmonics ratio measured on the recordings via both smartphones, the microphone, and measured directly on the sound files from the synthesizer. Smartphones thus appear adequate for reliable recording and digitizing of pathologic voices. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

[Validation of the Schizophrenia Quality Of Life Scale (SQLS) to Measure Quality of Life in Patients Diagnosed With Schizophrenia in Colombia].

PubMed

Suárez, María Fernanda; Sánchez, Ricardo; Calvo, José Manuel

2013-09-01

To validate the SQLS scale in Colombian patients diagnosed with schizophrenia. The self-report scale was applied to 251 patients. Measures of test-retest reliability, internal consistency and correlation inter-scales with the SF-12 were made by applying the scale 2 days later in 28 patients, and 30 days later in 38; 50 patients filled-out the SF-12 scale to determine the concurrent validity. Three domains were found with all of them having Cronbach's alphas >0.7. The three factors model did not show adequate fit indexes. Test-retest evaluation showed satisfactory correlation values (>0.86). Sensitivity to change did not shown significant differences between the repeated measures. As regards concurrent validity, acceptable correlation values were found only in SF-12 domains related to mental health and functioning. The SQLS has a factorial structure consistent with previous reports, adequate internal consistency and temporal stability. However, a more detailed examination of some of these items is required, considering that the measurement of the construct does not appear to be adequate. Copyright © 2013 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

Validity and reliability of the NAB Naming Test.

PubMed

Sachs, Bonnie C; Rush, Beth K; Pedraza, Otto

2016-05-01

Confrontation naming is commonly assessed in neuropsychological practice, but few standardized measures of naming exist and those that do are susceptible to the effects of education and culture. The Neuropsychological Assessment Battery (NAB) Naming Test is a 31-item measure used to assess confrontation naming. Despite adequate psychometric information provided by the test publisher, there has been limited independent validation of the test. In this study, we investigated the convergent and discriminant validity, internal consistency, and alternate forms reliability of the NAB Naming Test in a sample of adults (Form 1: n = 247, Form 2: n = 151) clinically referred for neuropsychological evaluation. Results indicate adequate-to-good internal consistency and alternate forms reliability. We also found strong convergent validity as demonstrated by relationships with other neurocognitive measures. We found preliminary evidence that the NAB Naming Test demonstrates a more pronounced ceiling effect than other commonly used measures of naming. To our knowledge, this represents the largest published independent validation study of the NAB Naming Test in a clinical sample. Our findings suggest that the NAB Naming Test demonstrates adequate validity and reliability and merits consideration in the test arsenal of clinical neuropsychologists.

Value of information analysis in healthcare: a review of principles and applications.

PubMed

Tuffaha, Haitham W; Gordon, Louisa G; Scuffham, Paul A

2014-06-01

Economic evaluations are increasingly utilized to inform decisions in healthcare; however, decisions remain uncertain when they are not based on adequate evidence. Value of information (VOI) analysis has been proposed as a systematic approach to measure decision uncertainty and assess whether there is sufficient evidence to support new technologies. The objective of this paper is to review the principles and applications of VOI analysis in healthcare. Relevant databases were systematically searched to identify VOI articles. The findings from the selected articles were summarized and narratively presented. Various VOI methods have been developed and applied to inform decision-making, optimally designing research studies and setting research priorities. However, the application of this approach in healthcare remains limited due to technical and policy challenges. There is a need to create more awareness about VOI analysis, simplify its current methods, and align them with the needs of decision-making organizations.

Protection performance evaluation regarding imaging sensors hardened against laser dazzling

NASA Astrophysics Data System (ADS)

Ritt, Gunnar; Koerber, Michael; Forster, Daniel; Eberle, Bernd

2015-05-01

Electro-optical imaging sensors are widely distributed and used for many different purposes, including civil security and military operations. However, laser irradiation can easily disturb their operational capability. Thus, an adequate protection mechanism for electro-optical sensors against dazzling and damaging is highly desirable. Different protection technologies exist now, but none of them satisfies the operational requirements without any constraints. In order to evaluate the performance of various laser protection measures, we present two different approaches based on triangle orientation discrimination on the one hand and structural similarity on the other hand. For both approaches, image analysis algorithms are applied to images taken of a standard test scene with triangular test patterns which is superimposed by dazzling laser light of various irradiance levels. The evaluation methods are applied to three different sensors: a standard complementary metal oxide semiconductor camera, a high dynamic range camera with a nonlinear response curve, and a sensor hardened against laser dazzling.

Automated Mars surface sample return mission concepts for achievement of essential scientific objectives

NASA Technical Reports Server (NTRS)

Weaver, W. L.; Norton, H. N.; Darnell, W. L.

1975-01-01

Mission concepts were investigated for automated return to Earth of a Mars surface sample adequate for detailed analyses in scientific laboratories. The minimum sample mass sufficient to meet scientific requirements was determined. Types of materials and supporting measurements for essential analyses are reported. A baseline trajectory profile was selected for its low energy requirements and relatively simple implementation, and trajectory profile design data were developed for 1979 and 1981 launch opportunities. Efficient spacecraft systems were conceived by utilizing existing technology where possible. Systems concepts emphasized the 1979 launch opportunity, and the applicability of results to other opportunities was assessed. It was shown that the baseline missions (return through Mars parking orbit) and some comparison missions (return after sample transfer in Mars orbit) can be accomplished by using a single Titan III E/Centaur as the launch vehicle. All missions investigated can be accomplished by use of Space Shuttle/Centaur vehicles.

Analog-to-digital conversion to accommodate the dynamics of live music in hearing instruments.

PubMed

Hockley, Neil S; Bahlmann, Frauke; Fulton, Bernadette

2012-09-01

Hearing instrument design focuses on the amplification of speech to reduce the negative effects of hearing loss. Many amateur and professional musicians, along with music enthusiasts, also require their hearing instruments to perform well when listening to the frequent, high amplitude peaks of live music. One limitation, in most current digital hearing instruments with 16-bit analog-to-digital (A/D) converters, is that the compressor before the A/D conversion is limited to 95 dB (SPL) or less at the input. This is more than adequate for the dynamic range of speech; however, this does not accommodate the amplitude peaks present in live music. The hearing instrument input compression system can be adjusted to accommodate for the amplitudes present in music that would otherwise be compressed before the A/D converter in the hearing instrument. The methodology behind this technological approach will be presented along with measurements to demonstrate its effectiveness.

[The risk for illegal behaviour and corruption in the healthcare sector: what preventive measures can be taken?].

PubMed

Rivoiro, Chiara

2016-05-01

In the healthcare sector risk factors for illegal behavior and corruption are peculiar and greater than in other social areas, as it plays a crucial role in the community's economical, political and cultural life. The healthcare services is a complex network that require interaction between may people, constant contacts with the industry, safety and adequate facilities that require regular maintenance, upgrade and replacement of medical technology, connection with local and regional policy makers. This provides the opportunity of being exposed to improper influence. However, illegal behaviors can be prevented: first of all supporting all professionals that everyday work to protect our health with ethics and expertise; then with all instruments that anti-corruption action plans, such as the one introduced in Italy in 2012, aim to identify and target those areas most at risk of corruption phenomena.

LANDSAT follow-on: A report by the applications survey groups. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Billingsley, F. C.; Helton, M. R.; Obrien, V. M.

1976-01-01

Attempts at operational usage of the LANDSAT imagery by non NASA users are studied with particular emphasis on profitable use of the imagery, as contrasted with investigations concerned with research and development of a technology. An evaluation is given of the functional capabilities of the LANDSAT follow-on and ground systems designs in terms of user requirements and desiderata for data measurements, products, and parameters. Applications survey groups (ASGs) were formed for mineral and petroleum exploration, inland water resources, land inventory, and agriculture. The members were drawn from all segments of the user community: Federal agencies, state and local governments or agencies (or from associations of such constituencies), industry and universities. They were selected so that in aggregate they would be able to adequately assess the state-of-the-art in their technical areas and represent this in the ASG deliberations.

Sustainable Development vs. Post-Industrial Transformation: Possibilities for Russia

NASA Astrophysics Data System (ADS)

Zhironkin, Sergey; Gasanov, Magerram; Barysheva, Galina; Gasanov, Eyvaz; Zhironkina, Olga; Kayachev, Gennady

2017-11-01

Today the theory of postindustrial society is one of the most widespread concepts which allow adequately comprehending the largescale changes that have occurred in the ecological consciousness of Western societies for the last thirty years. Offered in the late 1960s and early 1970s by American and European researchers in the field of economics, social philosophy, and ecology, the integrated idea of sustainable development in postindustrial era incorporated the best elements of the scientific tradition dating back to the Age of Enlightenment. The article emphasizes that the key to modern social progress is the rapid technological development based on the transformation of science into a direct productive force. The measure of such progress is a shift from pure economic growth to the sustainable development. The authors describe the ways of changing Russian Government's attitude to economy regulation in postindustrial development to achieve the goals of sustainable development.

75 FR 5585 - Notice of a Regional Project Waiver of Section 1605 (Buy American Requirement) of the American...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-03

... at the ACSD's North Plant wastewater treatment plant (WWTP), and to produce electrical power for on... turbine generator manufactured in the United States is of adequate capacity to meet the electrical power..., (2) Ormat Technologies, Inc, in Israel, and (3) Adoratec, in Germany. This is a project specific...

North American Science Symposium: Toward a unified framework for inventorying and monitoring forest ecosystem resources

Treesearch

Celedonio Aguirre-Bravo; Carlos Rodriguez Franco

1999-01-01

The general objective of this Symposium was to build on the best science and technology available to assure that the data and information produced in future inventory and monitoring programs are comparable, quality assured, available, and adequate for their intended purposes, thereby providing a reliable framework for characterization, assessment, and management of...

Examining the Potential of Information Technologies to Improve Cost Control in Community Colleges

ERIC Educational Resources Information Center

Sudhakar, Samuel

2013-01-01

The challenges facing publicly funded community colleges have never been greater. Declining state and federal support and decreasing property tax revenues have placed a tremendous pressure on tuition rates. Declining revenues combined with the lack of adequate cost control, has caused in-state tuition and fees at public 2-year colleges to increase…

Production of Accurate Skeletal Models of Domestic Animals Using Three-Dimensional Scanning and Printing Technology

ERIC Educational Resources Information Center

Li, Fangzheng; Liu, Chunying; Song, Xuexiong; Huan, Yanjun; Gao, Shansong; Jiang, Zhongling

2018-01-01

Access to adequate anatomical specimens can be an important aspect in learning the anatomy of domestic animals. In this study, the authors utilized a structured light scanner and fused deposition modeling (FDM) printer to produce highly accurate animal skeletal models. First, various components of the bovine skeleton, including the femur, the…

Perceptions of Digital Competency among Student Teachers: Contributing to the Development of Student Teachers' Instructional Self-Efficacy in Technology-Rich Classrooms

ERIC Educational Resources Information Center

Elstad, Eyvind; Christophersen, Knut-Andreas

2017-01-01

Adequate self-efficacy is useful for motivating individuals to engage in continued improvement. This study explores the potential antecedents of instructional self-efficacy beliefs among Norwegian student teachers attending a programme for secondary school teachers. The most important finding was the strong association between the student…

Capture the Human Side of Learning: Data Makeover Puts Students Front and Center

ERIC Educational Resources Information Center

Sharratt, Lyn; Fullan, Michael

2013-01-01

Education is overloaded with programs and data. The growth of digital power has aided and abetted the spread of accountability-driven data--Adequate Yearly Progress, test results for every child in every grade, Common Core standards, formative and summative assessments. Technology accelerates the onslaught of data. All this information goes for…

Ethics of Research into Learning and Teaching with Web 2.0: Reflections on Eight Case Studies

ERIC Educational Resources Information Center

Chang, Rosemary L.; Gray, Kathleen

2013-01-01

The unique features and educational affordances of Web 2.0 technologies pose new challenges for conducting learning and teaching research in ways that adequately address ethical issues of informed consent, beneficence, respect, justice, research merit and integrity. This paper reviews these conceptual bases of human research ethics and gives…

Water Purification, Distribution and Sewage Disposal. Appropriate Technologies for Development. Reprint R-29.

ERIC Educational Resources Information Center

1979

This document, designed to serve as a training manual for technical instructors and as a field resource reference for Peace Corps volunteers, consists of nine units. Unit topics focus on: (1) water supply sources; (2) water treatment; (3) planning water distribution systems; (4) characteristics of an adequate system; (5) construction techniques;…

Meeting the STEM Workforce Demand: Accelerating Math Learning among Students Interested in STEM. BHEF Research Brief

ERIC Educational Resources Information Center

Business-Higher Education Forum (NJ1), 2011

2011-01-01

Efforts by federal and state governments to increase the STEM (science, technology, engineering and mathematics) workforce in support of innovation and competitiveness are frustrated by a shortage of adequately prepared and interested students. Less than half of 12th graders meet the math proficiency benchmark that indicates college readiness.…

Re-Engineering Information Technology: Design Considerations for Competency Education. CompetencyWorks Issue Brief

ERIC Educational Resources Information Center

Glowa, Liz

2013-01-01

Competency education is student-centric, personalizing student progress so that every child has adequate time and support to reach proficiency every step of the way. Competency education fundamentally changes the way the educational enterprise is organized around student needs, and thus must have a dynamic IT system to support it. Following an…

Towards a Context-Aware Proactive Decision Support Framework

DTIC Science & Technology

2013-11-15

initiative that has developed text analytic technology that crosses the semantic gap into the area of event recognition and representation. The...recognizing operational context, and techniques for recognizing context shift. Additional research areas include: • Adequately capturing users...Universal Interaction Context Ontology [12] might serve as a foundation • Instantiating formal models of decision making based on information seeking

78 FR 55052 - Agency Information Collection Activities: Proposed Collection; Comment Request-Form FNS-13...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-09

... waivers are met, as described in 7 CFR 210.17. The form is an intrinsic part of the accounting system... adequate recordkeeping. The FNS-13 form is provided to States through a web-based Federal reporting system... reporting burden hours as a result of automation and the advancement of State systems technology. The...

Designing a Versatile Dedicated Computing Lab to Support Computer Network Courses: Insights from a Case Study

ERIC Educational Resources Information Center

Gercek, Gokhan; Saleem, Naveed

2006-01-01

Providing adequate computing lab support for Management Information Systems (MIS) and Computer Science (CS) programs is a perennial challenge for most academic institutions in the US and abroad. Factors, such as lack of physical space, budgetary constraints, conflicting needs of different courses, and rapid obsolescence of computing technology,…

Evaluation of the Android Software for Special Needs Children

ERIC Educational Resources Information Center

Soykan, Emrah; Özdamli, Fezile

2017-01-01

It is clearly understood that technology oriented education on special training is neither sound nor adequate when considered from the literary point of view in our country. Limited studies held in country not only support this point of view but also demonstrate the lack of resource and studies carried out in this area. During the designing and…

Students as Collaborators in Creating Meaningful Learning Experiences in Technology-Enhanced Classrooms: An Engaged Scholarship Approach

ERIC Educational Resources Information Center

Nel, Liezel

2017-01-01

In dealing with numerous challenges, higher education instructors need to adapt their pedagogical practices to present students with meaningful, engaged learning experiences that are likely to promote student success and adequately prepare students for the world we live in. As part of this pedagogical transformation instructors also need to…

Instructional Strategies and Course Design for Teaching Statistics Online: Perspectives from Online Students

ERIC Educational Resources Information Center

Yang, Dazhi

2017-01-01

Background: Teaching online is a different experience from that of teaching in a face-to-face setting. Knowledge and skills developed for teaching face-to-face classes are not adequate preparation for teaching online. It is even more challenging to teach science, technology, engineering and math (STEM) courses completely online because these…

Problem-Based Learning: A Promising Pathway for Empowering Pre-Service Teachers for ICT-Mediated Language Teaching

ERIC Educational Resources Information Center

Kharade, Kalpana; Peese, Hema

2014-01-01

Information and communication technology (ICT) has become a prominent part of education and offers numerous means of improving teaching and learning in the classroom. However, the tendency to take the teacher education curriculum for granted and the assumption that it adequately prepares teachers for the integration of ICT into their teaching…

Measuring the RC time constant with Arduino

NASA Astrophysics Data System (ADS)

Pereira, N. S. A.

2016-11-01

In this work we use the Arduino UNO R3 open source hardware platform to assemble an experimental apparatus for the measurement of the time constant of an RC circuit. With adequate programming, the Arduino is used as a signal generator, a data acquisition system and a basic signal visualisation tool. Theoretical calculations are compared with direct observations from an analogue oscilloscope. Data processing and curve fitting is performed on a spreadsheet. The results obtained for the six RC test circuits are within the expected interval of values defined by the tolerance of the components. The hardware and software prove to be adequate to the proposed measurements and therefore adaptable to a laboratorial teaching and learning context.

Future of Assurance: Ensuring that a System is Trustworthy

NASA Astrophysics Data System (ADS)

Sadeghi, Ahmad-Reza; Verbauwhede, Ingrid; Vishik, Claire

Significant efforts are put in defining and implementing strong security measures for all components of the comput-ing environment. It is equally important to be able to evaluate the strength and robustness of these measures and establish trust among the components of the computing environment based on parameters and attributes of these elements and best practices associated with their production and deployment. Today the inventory of techniques used for security assurance and to establish trust -- audit, security-conscious development process, cryptographic components, external evaluation - is somewhat limited. These methods have their indisputable strengths and have contributed significantly to the advancement in the area of security assurance. However, shorter product and tech-nology development cycles and the sheer complexity of modern digital systems and processes have begun to decrease the efficiency of these techniques. Moreover, these approaches and technologies address only some aspects of security assurance and, for the most part, evaluate assurance in a general design rather than an instance of a product. Additionally, various components of the computing environment participating in the same processes enjoy different levels of security assurance, making it difficult to ensure adequate levels of protection end-to-end. Finally, most evaluation methodologies rely on the knowledge and skill of the evaluators, making reliable assessments of trustworthiness of a system even harder to achieve. The paper outlines some issues in security assurance that apply across the board, with the focus on the trustworthiness and authenticity of hardware components and evaluates current approaches to assurance.

Genomic markers for decision making: what is preventing us from using markers?

PubMed

Coyle, Vicky M; Johnston, Patrick G

2010-02-01

The advent of novel genomic technologies that enable the evaluation of genomic alterations on a genome-wide scale has significantly altered the field of genomic marker research in solid tumors. Researchers have moved away from the traditional model of identifying a particular genomic alteration and evaluating the association between this finding and a clinical outcome measure to a new approach involving the identification and measurement of multiple genomic markers simultaneously within clinical studies. This in turn has presented additional challenges in considering the use of genomic markers in oncology, such as clinical study design, reproducibility and interpretation and reporting of results. This Review will explore these challenges, focusing on microarray-based gene-expression profiling, and highlights some common failings in study design that have impacted on the use of putative genomic markers in the clinic. Despite these rapid technological advances there is still a paucity of genomic markers in routine clinical use at present. A rational and focused approach to the evaluation and validation of genomic markers is needed, whereby analytically validated markers are investigated in clinical studies that are adequately powered and have pre-defined patient populations and study endpoints. Furthermore, novel adaptive clinical trial designs, incorporating putative genomic markers into prospective clinical trials, will enable the evaluation of these markers in a rigorous and timely fashion. Such approaches have the potential to facilitate the implementation of such markers into routine clinical practice and consequently enable the rational and tailored use of cancer therapies for individual patients.

Regulatory Science in Practice (Pharmaceuticals and Medical Devices Agency).

PubMed

Hojo, Taisuke

2017-01-01

Review, safety, and relief services of the Pharmaceuticals and Medical Devices Agency are primarily focused on scientifically evaluating pharmaceuticals, medical devices, and cellular and tissue-based products referring to their quality, efficacy, and safety, which requires a variety of scientific knowledge and methods. Pharmaceutical regulation should be established based on the most advanced scientific expertise at all times. In order to evaluate products that use cutting-edge technology such as induced pluripotent stem cells and information and communication technology adequately, since fiscal year 2012 the Science Committee has been established as a platform to exchange opinions among members from top-ranking domestic and international academia and to enhance personnel exchanges through the Initiative to Facilitate Development of Innovative Drugs. In addition, the Regulatory Science Center will be established in 2018 to increase the integrity of our services for product reviews and safety measures. In particular, requiring electronic data submissions for clinical trial applications followed by an advanced approach to analysis should not only enhance the quality of reviews of individual products but should also support the development of pharmaceuticals and medical devices by providing pharmaceutical affairs consultations on research and development strategies with various guidelines based on new insights resulting from product-bridging data analysis. Moreover, a database including electronic health records with comprehensive medical information collected mainly from 10 cooperating medical institutions will be developed with the aim of developing safety measures in a more timely manner using methods of pharmacoepidemiological analysis.

Measurement issues related to data collection on the World Wide Web.

PubMed

Strickland, Ora L; Moloney, Margaret F; Dietrich, Alexa S; Myerburg, Stuart; Cotsonis, George A; Johnson, Robert V

2003-01-01

As the World Wide Web has become more prominent as a mode of communication, it has opened up new possibilities for research data collection. This article identifies measurement issues that occur with Internet data collection that are relevant to qualitative and quantitative research approaches as they occurred in a triangulated Internet study of perimenopausal women with migraine headaches. Issues associated with quantitative data collection over the Internet include (a) selecting and designing Internet data collection protocols that adequately address study aims while also taking advantage of the Internet, (b) ensuring the reliability and validity of Internet data collected, (c) adapting quantitative paper-and-pencil data collection protocols for the Internet, (d) making Internet data collection practical for respondents and researchers, and (e) ensuring the quality of quantitative data collected. Qualitative data collection over the Internet needs to remain true to the philosophical stance of the qualitative approach selected. Researcher expertise in qualitative data collection must be combined with expertise in computer technology and information services if data are to be of ultimate quality The advantages and limitations of collecting qualitative data in real time or at a later time are explored, as well as approaches to enhance qualitative data collection over the Internet. It was concluded that like any research approach or method, Internet data collection requires considerable creativity, expertise, and planning to take advantage of the technology for the collection of reliable and valid research data.

Radioactivity measurement of radioactive contaminated soil by using a fiber-optic radiation sensor

NASA Astrophysics Data System (ADS)

Joo, Hanyoung; Kim, Rinah; Moon, Joo Hyun

2016-06-01

A fiber-optic radiation sensor (FORS) was developed to measure the gamma radiation from radioactive contaminated soil. The FORS was fabricated using an inorganic scintillator (Lu,Y)2SiO5:Ce (LYSO:Ce), a mixture of epoxy resin and hardener, aluminum foil, and a plastic optical fiber. Before its real application, the FORS was tested to determine if it performed adequately. The test result showed that the measurements by the FORS adequately followed the theoretically estimated values. Then, the FORS was applied to measure the gamma radiation from radioactive contaminated soil. For comparison, a commercial radiation detector was also applied to measure the same soil samples. The measurement data were analyzed by using a statistical parameter, the critical level to determine if net radioactivity statistically different from background was present in the soil sample. The analysis showed that the soil sample had radioactivity distinguishable from background.

THE EFFECTIVENESS OF QUADRATS FOR MEASURING VASCULAR PLANT DIVERSITY

EPA Science Inventory

Quadrats are widely used for measuring characteristics of vascular plant communities. It is well recognized that quadrat size affects measurements of frequency and cover. The ability of quadrats of varying sizes to adequately measure diversity has not been established. An exha...

[Care with the child's health and validation of an educational technology for riverside families].

PubMed

Teixeira, Elizabeth; de Almeida Siqueira, Aldo; da Silva, Joselice Pereira; Lavor, Lília Cunha

2011-01-01

This study aimed to assess the knowledge and ways of caring for the child health 0-5 years between riverine (Phase 1), and to validate an educational technology (Phase 2). It was carried out a descriptive qualitative study. With the mothers, focus groups and content analysis were used, and with judges-specialists and target-public-applied, forms. The study revealed that the concern with the care of a child between the riverine families permeates the adversity daily, with dedication and commitment of these families in maintaining the health of their children. The sensitivity listening of mothers indicated the need for a closer relationship between nursing professionals and family. The validation of the educational technology was convergent, within the parameters considered adequate.

Role of ultraviolet (UV) disinfection in infection control and environmental cleaning.

PubMed

Qureshi, Zubair; Yassin, Mohamed H

2013-06-01

Ultraviolet (UV) radiation is capable of disinfecting surfaces, water and air. The UV technology was used for many years. However, safer and more effective delivery systems of UV radiation, make it a very useful option for disinfection. Effective disinfection of environmental surfaces is a key step in the prevention of spread of infectious agents. The traditional manual cleaning is essential in assuring adequate elimination of contamination. However, terminal cleaning is frequently suboptimal or unpredictable in many circumstances. UV-C radiation is an adjunctive disinfectant new technology that could kill a wide array of microorganisms including both vegetative and spore forming pathogens. The technology is getting more affordable and has produced consistent reproducible significant reduction of bacterial contamination.

Small water and wastewater systems: pathways to sustainable development?

PubMed

Ho, G

2003-01-01

Globally we are faced with billions of people without access to safe water and adequate sanitation. These are generally located in developing communities. Even in developed communities the current large scale systems for supplying water, collecting wastewater and treating it are not environmentally sustainable, because it is difficult to close the cycle of water and nutrients. This paper discusses the advantages of small scale water and wastewater systems in overcoming the difficulties in providing water and wastewater systems in developing communities and in achieving sustainability in both developed and developing communities. Particular attention is given to technology and technology choice, even though technology alone does not provide the complete answer. Disadvantages of small scale systems and how they may be overcome are discussed.

NASA Redox system development project status

NASA Technical Reports Server (NTRS)

Nice, A. W.

1981-01-01

NASA-Redox energy storage systems developed for solar power applications and utility load leveling applications are discussed. The major objective of the project is to establish the technology readiness of Redox energy storage for transfer to industry for product development and commercialization by industry. The approach is to competitively contract to design, build, and test Redox systems progressively from preprototype to prototype multi-kW and megawatt systems and conduct supporting technology advancement tasks. The Redox electrode and membrane are fully adequate for multi-kW solar related applications and the viability of the Redox system technology as demonstrated for multi-kW solar related applications. The status of the NASA Redox Storage System Project is described along with the goals and objectives of the project elements.

Tracking and data acquisition system for the 1990's. Volume 7: TDAS space technology assessment

NASA Technical Reports Server (NTRS)

Khatri, R.

1983-01-01

The results of the TDAS and user spacecraft technology assessment effort are provided. For each TDAS Satellite enhancement and user spacecraft element previously enumerated, the technology issues are identified and the R&D needed to resolve these issues is delineated. Subsequently, taking into account developments taking place elsewhere, the addition unique TDAS satellite module and user spacecraft element R&D efforts needed are identified, and conclusions are drawn in each case. From these conclusions, it is evident that with additional unique R&D efforts carried out for TDAS and appropriate user spacecraft elements the desired TDAS' capabilities for the 1990's can be realized and user spacecraft can be implemented that adequately interface with the projected TDAS.

Meeting the Challenge of Adequate Yearly Progress: How One School Is Learning to Leave No Child Behind

ERIC Educational Resources Information Center

Richardson, Jacqueline S.; Soltez, Jeff

2003-01-01

This article describes the step-by-step process Ross Elementary in Topeka, Kan., used to achieve Adequate Yearly Progress (AYP) in accordance with the No Child Left Behind Act of 2001. A simple process of using teamwork, setting specific measurable goals, and frequent monitoring of student progress toward these goals allowed Ross to significantly…

Design of a Far-Infrared Spectrometer for Atmospheric Thermal Emission Measurements

NASA Technical Reports Server (NTRS)

Johnson, David G.

2004-01-01

Global measurements of far infrared emission from the upper troposphere are required to test models of cloud radiative forcing, water vapor continuum emission, and cooling rates. Spectra with adequate resolution can also be used for retrieving atmospheric temperature and humidity profiles, and yet there are few spectrally resolved measurements of outgoing longwave flux at wavelengths longer than 16 m. It has been difficult to make measurements in the far infrared due to the need for liquid-helium cooled detectors and large optics to achieve adequate sensitivity and bandwidth. We review design considerations for infrared Fourier transform spectrometers, including the dependence of system performance on basic system parameters, and discuss the prospects for achieving useful sensitivity from a satellite platform with a lightweight spectrometer using uncooled detectors.

Is home health technology adequate for proactive self-care?

PubMed

Horwitz, C M; Mueller, M; Wiley, D; Tentler, A; Bocko, M; Chen, L; Leibovici, A; Quinn, J; Shar, A; Pentland, A P

2008-01-01

To understand whether home health technology in the market and in development can satisfy the needs of patients and their non-professional caregivers for proactive support in managing health and chronic conditions in the home. A panel of clinical providers and technology researchers was assembled to examine whether home health technology addresses consumer-defined requirements for self-care devices. A lexicon of home care and self-care technology terms was then created. A global survey of home health technology for patients with heart disease and dementia was conducted. The 254 items identified were categorized by conditions treated, primary user, function, and purpose. A focus group of patients and caregivers was convened to describe their expectations of self-care technology. Items identified in the database were then assessed for these attributes. Patients and family caregivers indicated a need for intelligent self-care technology which supports early diagnosis of health changes, intervention enablement, and improvement of communication quality among patients and the health care system. Of these, only intervention enablement was commonly found in the home health technology items identified. An opportunity exists to meet consumer self-care needs through increased research and development in intelligent self-care technology.

The AXAF technology program: The optical flats tests

NASA Technical Reports Server (NTRS)

Williams, A. C.; Harper, J. D.; Reily, J. C.; Weisskopf, M. C.; Wyman, C. L.; Zombeck, M.

1984-01-01

The results of a technology program aimed at determining the limits of surface polishing for reflecting X-ray telescopes is presented. This program is part of the major task of developing the Advanced X-ray Astrophysical Facility (AXAF). By studying the optical properties of state-of-the-art polished flat surfaces, conclusions were drawn as to the potential capability of AXAF. Surface microtopography of the flats as well as their figure are studied by X-ray, visual, and mechanical techniques. These techniques and their results are described. The employed polishing techniques are more than adequate for the specifications of the AXAF mirrors.

International Cooperation in Environmental Management and Rational Use of Natural Resources

NASA Astrophysics Data System (ADS)

Fedulova, E. A.; Korchagina, I. V.; Vik, S. V.; Kalinina, O. I.; Martyanov, V. L.

2017-01-01

The progress in technologies is developing towards the unlimited growth of production and consumption, wasteful use of natural resources and biosphere. These problems require adequate response such as international cooperation and integration of the efforts of authorities, scientists, representatives of educational system. Such cooperation is important to ensure the transition to the sustainable, ecologically-oriented practices of natural resources rational use. This is impossible without establishing a new environmental management system based upon formation of ecological competence of all scientific and technological progress participants among which the higher school scholars must play a leading role.

Embodied harms: gender, shame, and technology-facilitated sexual violence.

PubMed

Henry, Nicola; Powell, Anastasia

2015-06-01

Criminality in cyberspace has been the subject of much debate since the 1990s, yet comparatively little attention has been paid to technology-facilitated sexual violence and harassment (TFSV). The aim of this article is to explore the ways in which retraditionalized gender hierarchies and inequalities are manifested in online contexts, and to conceptualize the cause and effects of TFSV as "embodied harms." We argue that problematic mind/body and online/off-line dualisms result in a failure to grasp the unique nature of embodied harms, precluding an adequate understanding and theorization of TFSV. © The Author(s) 2015.

Challenges in regulation of biomedical research: The case of Kenya.

PubMed

Wekesa, M

2015-12-01

Unregulated biomedical research has previously caused untold suffering to humankind. History is full of examples of abuse of animal and human subjects for research. Several codes and instruments have been formulated to regulate biomedical research. In Kenya, the Science, Technology and Innovation Act, 2014, together with the Constitution of Kenya, 2010, provide a fairly robust legal framework. Possible challenges include capacity building, overlap of functions of institutions, monitoring and evaluation, scientific/technological advances, intellectual property rights, funding for research, and dispute resolution. It is hoped that the new legislation will adequately address these challenges.

Choice of mathematical models for technological process of glass rod drawing

NASA Astrophysics Data System (ADS)

Alekseeva, L. B.

2017-10-01

The technological process of drawing glass rods (light guides) is considered. Automated control of the drawing process is reduced to the process of making decisions to ensure a given quality. The drawing process is considered as a control object, including the drawing device (control device) and the optical fiber forming zone (control object). To study the processes occurring in the formation zone, mathematical models are proposed, based on the continuum mechanics basics. To assess the influence of disturbances, a transfer function is obtained from the basis of the wave equation. Obtaining the regression equation also adequately describes the drawing process.

Role of Concentrating Solar Power in Integrating Solar and Wind Energy: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Denholm, P.; Mehos, M.

2015-06-03

As wind and solar photovoltaics (PV) increase in penetration it is increasingly important to examine enabling technologies that can help integrate these resources at large scale. Concentrating solar power (CSP) when deployed with thermal energy storage (TES) can provide multiple services that can help integrate variable generation (VG) resources such as wind and PV. CSP with TES can provide firm, highly flexible capacity, reducing minimum generation constraints which limit penetration and results in curtailment. By acting as an enabling technology, CSP can complement PV and wind, substantially increasing their penetration in locations with adequate solar resource.

Information security of Smart Factories

NASA Astrophysics Data System (ADS)

Iureva, R. A.; Andreev, Y. S.; Iuvshin, A. M.; Timko, A. S.

2018-05-01

In several years, technologies and systems based on the Internet of things (IoT) will be widely used in all smart factories. When processing a huge array of unstructured data, their filtration and adequate interpretation are a priority for enterprises. In this context, the correct representation of information in a user-friendly form acquires special importance, for which the market today presents advanced analytical platforms designed to collect, store and analyze data on technological processes and events in real time. The main idea of the paper is the statement of the information security problem in IoT and integrity of processed information.

Research and Development of Information and Communication Technology-based Home Blood Pressure Monitoring from Morning to Nocturnal Hypertension.

PubMed

Kario, Kazuomi; Tomitani, Naoko; Matsumoto, Yuri; Hamasaki, Haruna; Okawara, Yukie; Kondo, Maiko; Nozue, Ryoko; Yamagata, Hiromi; Okura, Ayako; Hoshide, Satoshi

2016-01-01

Asians have specific characteristics of hypertension (HTN) and its relationship with cardiovascular disease. The morning surge in blood pressure (BP) in Asians is more extended, and the association slope between higher BP and the risk for cardiovascular events is steeper in this population than in whites. Thus, 24-hour BP control including at night and in the morning is especially important for Asian patients with HTN. There are 3 components of "perfect 24-hour BP control": the 24-hour BP level, adequate dipping of nocturnal BP (dipper type), and adequate BP variability such as the morning BP surge. The morning BP-guided approach using home BP monitoring (HBPM) is the first step toward perfect 24-hour BP control. After controlling morning HTN, nocturnal HTN is the second target. We have been developing HBPM that can measure nocturnal BP. First, we developed a semiautomatic HBPM device with the function of automatic fixed-interval BP measurement during sleep. In the J-HOP (Japan Morning Surge Home Blood Pressure) study, the largest nationwide home BP cohort, we successfully measured nocturnal home BP using this device with data memory, 3 times during sleep (2, 3, and 4 am), and found that nocturnal home BP is significantly correlated with organ damage independently of office and morning BP values. The second advance was the development of trigger nocturnal BP (TNP) monitoring with an added trigger function that initiates BP measurements when oxygen desaturation falls below a variable threshold continuously monitored by pulse oximetry. TNP can detect the specific nocturnal BP surges triggered by hypoxic episodes in patients with sleep apnea syndrome. We also added the lowest heart rate-trigger function to TNP to detect the "basal nocturnal BP," which is determined by the circulating volume and structural cardiovascular system without any increase in sympathetic tonus. This double TNP is a novel concept for evaluating the pathogenic pressor mechanism of nocturnal BP. These data are now collected using an information and communication technology (ICT)-based monitoring system. The BP variability includes different time-phase variability from the shortest beat-by-beat, positional, diurnal, day-by-day, visit-to-visit, seasonal, and the longest yearly changes. The synergistic resonance of each type of BP variability would produce great dynamic BP surges, which trigger cardiovascular events. Thus, in the future, the management of HTN based on the simultaneous assessment of the resonance of all of the BP variability phenotypes using a wearable "surge" BP monitoring device with an ICT-based data analysis system will contribute to the ultimate individualized medication for cardiovascular disease. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

Conformance Testing: Measurement Decision Rules

NASA Technical Reports Server (NTRS)

Mimbs, Scott M.

2010-01-01

The goal of a Quality Management System (QMS) as specified in ISO 9001 and AS9100 is to provide assurance to the customer that end products meet specifications. Measuring devices, often called measuring and test equipment (MTE), are used to provide the evidence of product conformity to specified requirements. Unfortunately, processes that employ MTE can become a weak link to the overall QMS if proper attention is not given to the measurement process design, capability, and implementation. Documented "decision rules" establish the requirements to ensure measurement processes provide the measurement data that supports the needs of the QMS. Measurement data are used to make the decisions that impact all areas of technology. Whether measurements support research, design, production, or maintenance, ensuring the data supports the decision is crucial. Measurement data quality can be critical to the resulting consequences of measurement-based decisions. Historically, most industries required simplistic, one-size-fits-all decision rules for measurements. One-size-fits-all rules in some cases are not rigorous enough to provide adequate measurement results, while in other cases are overly conservative and too costly to implement. Ideally, decision rules should be rigorous enough to match the criticality of the parameter being measured, while being flexible enough to be cost effective. The goal of a decision rule is to ensure that measurement processes provide data with a sufficient level of quality to support the decisions being made - no more, no less. This paper discusses the basic concepts of providing measurement-based evidence that end products meet specifications. Although relevant to all measurement-based conformance tests, the target audience is the MTE end-user, which is anyone using MTE other than calibration service providers. Topics include measurement fundamentals, the associated decision risks, verifying conformance to specifications, and basic measurement decisions rules.

Exploring the functional impact of adaptive seating on the lives of individual children and their families: a collective case study.

PubMed

Stier, Carly D; Chieu, Ivan B; Howell, Lori; Ryan, Stephen E

2017-07-01

This study examined parent-reported change in the functional performance of four school-aged children with wheeled mobility needs who had used a new adaptive seating system for 6 weeks. The collective case study involved four mothers whose children, ages 6-9 years, received a new adaptive seating system for a manual wheelchair or stroller. Mothers completed the Family Impact of Assistive Technology Scale for Adaptive Seating (FIATS-AS) at the time their child received a new seating system, and then after 6 weeks of daily use. Other questionnaires, health records, and semi-structured interviews provided additional data about the seating interventions and their functional effects on individual children and their families. The FIATS-AS detected overall functional gain in one family, and both gains and losses in 2-7 dimensions for all families. Functional status and change scores showed consistency with measures of seating intervention satisfaction, global functional change, and home participation. Interview themes also suggested consistency with change scores, but provided a deeper understanding of important factors that influenced adaptive seating outcomes. This study supports the need to explore further the complexity, temporality and meaningfulness of adaptive seating outcomes in individual children and their families. Implications for Rehabilitation Assistive technology practitioners need to adopt practical measurement strategies that consider the complexity, temporality, and meaningfulness of outcomes to make evidence-informed decisions about how to improve adaptive seating services and interventions. Health measurement scales that measure adaptive seating outcomes for service applications must have adequate levels of reliability and validity, as well as demonstrate responsive to important change over time for individual children and their families. Needs-specific measurement scales provide a promising avenue for understanding functional outcomes for individual children and youth who use adaptive seating systems.

Measurement techniques for analysis of fission fragment excited gases

NASA Technical Reports Server (NTRS)

Schneider, R. T.; Carroll, E. E.; Davis, J. F.; Davie, R. N.; Maguire, T. C.; Shipman, R. G.

1976-01-01

Spectroscopic analysis of fission fragment excited He, Ar, Xe, N2, Ne, Ar-N2, and Ne-N2 have been conducted. Boltzmann plot analysis of He, Ar and Xe have indicated a nonequilibrium, recombining plasma, and population inversions have been found in these gases. The observed radiating species in helium have been adequately described by a simple kinetic model. A more extensive model for argon, nitrogen and Ar-N2 mixtures was developed which adequately describes the energy flow in the system and compares favorably with experimental measurements. The kinetic processes involved in these systems are discussed.

[How can the impact of Health Technology Assessment (HTA) in the Austrian healthcare system be assessed? Design of a conceptual framework].

PubMed

Schumacher, I; Zechmeister, I

2012-04-01

In Austria research in Health Technology Assessment (HTA) has been conducted since the 1990s. Research in HTA aims at supporting an adequate and efficient use of health care resources in order to sustain a publicly financed and solidary health care system. Ultimately, HTA research should result in better health of the population. Research results should provide independent information for decision makers. For legitimizing further research resources and for prioritizing future HTA research and guaranteeing the value of future research, HTA research needs itself to undergo evaluation. Aim of the study is to design a conceptual framework for evaluating the impact of HTA research in Austria on the basis of the existing literature. An already existing review which presents methods and concepts how to evaluate HTA-impact was updated by a systematic research including literature of the years 2004-January 2010. Results were analysed in regard to 4 categories: definition of the term impact, target groups and system levels, operationalisation of indicators and evaluation methods. Overall, 19 publications were included. Referring to the 4 categories, an explanation of impact has to take into account HTAs multidisciplinary setting and needs a context related definition. Target groups, system levels, indicators and methods depend on the impact defined. Studies investigated direct and indirect impact and were focused on different target groups like physicians, nurses and decision makers on the micro-, and meso level, as well as politicians and reimbursement institutions on the macro level. Except for one reference all studies applied already known and mostly qualitative methods for measuring the impact of HTA research. Thus, an appropriate pool of instruments seems to be available. There is a lack of information about validity of applied methods and indicators. By adapting adequate methods and concepts a conceptual framework for the Austrian HTA-Impact evaluation has been designed. The paper presents an overview of existing methods for the evaluation of the HTA research. This has been used to identify useful approaches for measuring the HTA-impact in Austria. By providing a context sensitive framework for impact evaluation in Austria the Austrian HTA-research contributes to the international trend of impact-evaluation. © Georg Thieme Verlag KG Stuttgart · New York.

Mini-guts in a dish: Perspectives of adult Cystic Fibrosis (CF) patients and parents of young CF patients on organoid technology.

PubMed

Boers, Sarah N; de Winter-de Groot, Karin M; Noordhoek, Jacquelien; Gulmans, Vincent; van der Ent, Cornelis K; van Delden, Johannes J M; Bredenoord, Annelien L

2018-03-06

Organoid technology enables the cultivation of human tissues in a dish. Its precision medicine potential could revolutionize the Cystic Fibrosis (CF) field. We provide a first thematic exploration of the patient perspective on organoid technology to set the further research agenda, which is necessary for responsible development of this ethically challenging technology. 23 semi-structured qualitative interviews with 14 Dutch adult CF patients and 12 parents of young CF patients to examine their experiences, opinions, and attitudes regarding organoid technology. Four themes emerged: (1) Respondents express a close as well as a distant relationship to organoids; (2) the open-endedness of organoid technology sparks hopes and concerns, (3) commercial use evokes cautiousness. (4) Respondents mention the importance of sound consent procedures, long-term patient engagement, responsible stewardship, and stringent conditions for commercial use. The precision medicine potential of organoid technology can only be realized if the patient perspective is taken adequately into account. Copyright © 2018 European Cystic Fibrosis Society. Published by Elsevier B.V. All rights reserved.

Regulating the unknown: Managing the occupational health risks of nanomedical technologies and nanopharmaceuticals in the research laboratory

NASA Astrophysics Data System (ADS)

Ersin, Ozlem Hacer

Novel technologies and their resultant products demand fresh ways of thinking about pre-market risk analysis and post-market surveillance. A regulatory framework that is responsive to emerging knowledge about the hazards of novel technologies offers repeatable and transparent processes and remains economically and socially feasible. Workers are an especially vulnerable population who are exposed to unknown hazards of novel technologies and serve often as unwitting sentinels of impending risks. This Grounded Theory-based case study identifies gaps in our current ability to regulate novel technologies so as to minimize occupational health risks and offers necessary modifications for an environment that is conducive to proper regulation. Nanopharmaceuticals and the nano-based technologies at their base are used by way of exemplar technologies that are currently taxing the ability of the regulatory system to provide adequate oversight. Ambiguities of definition, absence of a tracking system (of who is doing nanotechnology research), and the paucity of scientific evidence to support risk management efforts are among the findings of the study and need to be addressed as ameliorative steps toward an effective regulatory structure.

Preparing technicians for engineering materials technology

NASA Technical Reports Server (NTRS)

Jacobs, James A.; Metzloff, Carlton H.

1990-01-01

A long held principle is that for every engineer and scientist there is a need for ten technicians to maximize the efficiency of the technology team for meeting needs of industry and government. Developing an adequate supply of technicians to meet the requirements of the materials related industry will be a challenge and difficult to accomplish. A variety of agencies feel the need and wish to support development of engineering materials technology programs. In a joint effort among Battelle Laboratories, the Department of Energy (DOE) and Northwest College and University Association for Science (NORCUS), the development of an engineering materials technology program for vocational programs and community colleges for the Pacific Northwest Region was recently completed. This effort has implications for a national model. The model Associate of Applied Science degree in Engineering Materials Technology shown provides a general structure. It purposely has course titles which need delimiting while also including a core of courses necessary to develop cognitive, affective and psychomotor skills with the underlining principles of math, science and technology so students have job entry skills, and so that students can learn about and adapt to evolving technology.

Enrichment methods provide a feasible approach to comprehensive and adequately powered investigations of the brain methylome

PubMed Central

Chan, Robin F.; Shabalin, Andrey A.; Xie, Lin Y.; Adkins, Daniel E.; Zhao, Min; Turecki, Gustavo; Clark, Shaunna L.; Aberg, Karolina A.

2017-01-01

Abstract Methylome-wide association studies are typically performed using microarray technologies that only assay a very small fraction of the CG methylome and entirely miss two forms of methylation that are common in brain and likely of particular relevance for neuroscience and psychiatric disorders. The alternative is to use whole genome bisulfite (WGB) sequencing but this approach is not yet practically feasible with sample sizes required for adequate statistical power. We argue for revisiting methylation enrichment methods that, provided optimal protocols are used, enable comprehensive, adequately powered and cost-effective genome-wide investigations of the brain methylome. To support our claim we use data showing that enrichment methods approximate the sensitivity obtained with WGB methods and with slightly better specificity. However, this performance is achieved at <5% of the reagent costs. Furthermore, because many more samples can be sequenced simultaneously, projects can be completed about 15 times faster. Currently the only viable option available for comprehensive brain methylome studies, enrichment methods may be critical for moving the field forward. PMID:28334972

Surgical treatment of secondary peritonitis : A continuing problem.

PubMed

van Ruler, O; Boermeester, M A

2017-01-01

Secondary peritonitis remains associated with high mortality and morbidity rates. Treatment of secondary peritonitis is challenging even in modern medicine. Surgical intervention for source control remains the cornerstone of treatment, beside adequate antimicrobial therapy and resuscitation. A randomized clinical trial showed that relaparotomy on demand (ROD) after initial emergency surgery is the preferred treatment strategy, irrespective of the severity and extent of peritonitis. The effective and safe use of ROD requires intensive monitoring of the patient in a setting where diagnostic tests and decision making about relaparotomy are guaranteed round the clock. The lack of knowledge on timely and adequate patient selection, together with the lack of use of easy but reliable monitoring tools, seems to hamper full implementation of ROD. The accuracy of the relap decision tool is reasonable for prediction of ongoing peritonitis and selection for computer tomography (CT). The value of CT in an early postoperative phase is unclear. Future research and innovative technologies should focus on the additive value of CT in cases of operated secondary peritonitis and on the further optimization of bedside prediction tools to enhance adequate patient selection for intervention in a multidisciplinary setting.

Technologic advances for evaluation of cervical cytology: is newer better?

PubMed

Hartmann, K E; Nanda, K; Hall, S; Myers, E

2001-12-01

Among those women who have cervical cancer and have been screened, 14% to 33% of the cases represent failure to detect abnormalities that existed at the time of screening. New technologies intended to improve detection of cytologic abnormalities include liquid-based, thin-layer cytology (ThinPrep, AutoCyte), computerized rescreening (PAPNET), and algorithm-based computer rescreening (AutoPap). This report combines evidence reviews conducted for the U.S. Preventive Services Task Force and the Agency for Healthcare Research and Quality, in which we systematically identified articles on cervical neoplasia, cervical dysplasia, and screening published between January 1966 and March 2001. We note the challenges for improving screening methods, providing an overview of methods for collecting and evaluating cytologic samples, and examining the evidence about the diagnostic performance of new technologies for detecting cervical lesions. Using standard criteria for evaluation of the diagnostic tests, we determined that knowledge about the sensitivity, specificity, and predictive values of new technologies is meager. Only one study of liquid-based cytology used a reference standard of colposcopy, with histology as indicated, to assess participants with normal screening results. Lack of an adequate reference standard is the overwhelming reason that test characteristics cannot be properly assessed or compared. Most publications compare results of screening using the new technology with expert panel review of the cytologic specimen. In that case, the tests are not independent measures and do nothing to relate the screening test findings to the true status of the cervix, making determination of false-negatives, and thus sensitivity, specificity, and negative predictive value, impossible. We did not identify any literature about health outcomes or cost effectiveness of using these tools in a system of screening. For the purposes of guiding decision making about choice of screening tools, the current evidence is inadequate to gauge whether new technologies are "better" than conventional cytology..

Lasers for vascular lesions: standard guidelines of care.

PubMed

Srinivas, C R; Kumaresan, M

2011-01-01

Lasers are a good therapeutic tool for congenital and acquired vascular lesions. Technological advances in lasers have reduced the adverse effects and increased the efficacy. MACHINES: Among the various lasers used for treating vascular lesions, pulsed dye laser (PDL) has the best efficacy and safety data. The other machines that are widely available are Nd:YAG laser and intense pulse light (IPL). RATIONALE AND SCOPE OF GUIDELINE: Much variation exists in different machines and techniques, and therefore, establishing standard guidelines has limitations. The guidelines recommended here indicate minimum standards of care for lasers on vascular lesions based on current evidence. Laser may be administered by a dermatologist, who has received adequate background training in lasers during post-graduation or later at a center that provides education and training in lasers, or in focused workshops, which provide such trainings. He/she should have adequate knowledge of the lesions being treated, machines, parameters, cooling systems, and aftercare. The procedure may be performed in the physician's minor procedure room with adequate laser safety measures. PWS, hemangioma, facial telangiectasia, rosacea, spider angioma, pyogenic granuloma, venous lakes, leg veins. Absolute: Active local infection, photo-aggravated skin diseases, and medical conditions. Relative: Unstable vitiligo, psoriasis, keloid and keloidal tendencies, patient on isotretinoin, patient who is not cooperative or has unrealistic expectation. Patient selection should be done after detailed counseling with respect to the course of lesions, different treatment options, possible results, cost, need for multiple treatments, and possible postoperative complications. TREATMENT SESSIONS: The number of treatments per lesion varies from 2 to 12 or more at 6-8 week intervals. All lesions may not clear completely even after multiple sessions in many cases. Hence, a realistic expectation and proper counseling is very important. Laser parameters vary with area, type of lesion, skin color, depth of the lesion, and machine used. A test spot may be performed to determine individual specifications. Pain, edema, purpura, bleeding, scarring, postinflammatory hyperpigmentation/hypopigmentation, and atrophy changes.

Preventing Obsolescence through Retraining: Contexts, Policies, and Programs. Information Series No. 322.

ERIC Educational Resources Information Center

Gordus, Jeanne Prial; And Others

This report addresses the degree to which retraining has met the challenge of ensuring that the American work force has adequate skills to cope with the changing world of work. Chapter 1 sketches economic, social, and technological changes that help explain why the current reactive approach needs to be more active. In chapter 2, the extensiveness…

The Mind Bending Quest for Cognitive Enhancers

PubMed Central

Arce, E

2016-01-01

Adequate cognitive functioning is essential for daily activities. When there is an insult to the brain, cognitive abilities can suffer, which, in turn, produce substantial medical and functional impairment. Advances in neurobiology, circuit neuroscience, and clinical assessment technology are converging in a manner that holds promise for the development of new pharmacological agents for cognitive enhancement in neuropsychiatric disease. PMID:27706806

The Development of an Educational Cloud for IS Curriculum through a Student-Run Data Center

ERIC Educational Resources Information Center

Hwang, Drew; Pike, Ron; Manson, Dan

2016-01-01

The industry-wide emphasis on cloud computing has created a new focus in Information Systems (IS) education. As the demand for graduates with adequate knowledge and skills in cloud computing is on the rise, IS educators are facing a challenge to integrate cloud technology into their curricula. Although public cloud tools and services are available…

Efficiency from Pharmacy Inventory Technology: A Means to Improving Quality in Non-Profit Hospitals

ERIC Educational Resources Information Center

McKelvey, Florence Ann

2013-01-01

Hospitals, like all organizations, have both a mission and a finite supply of resources with which to accomplish that mission. Because the inventory of therapeutic drugs is among the more expensive resources needed by a hospital to achieve its mission, a conceptual model of structure plus process equals outcome posits that adequate emphasis should…

Perceived Early Childhood Family Influence, Perceived Pain Self-Efficacy, and Chronic Pain Disability: An Exploratory Study

ERIC Educational Resources Information Center

Walker, Kate R. M.; Watts, Richard E.

2009-01-01

Chronic pain is an exponentially increasing issue for aging adults in the United States and has stretched the limits of technology and the ability of health care professionals to provide adequate care. Chronic pain deprives individuals of their independence, confidence, quality of life, and often their primary support groups while leaving them…

The ABCs of Technology Leasing: Get the Facts on the Pros and Cons of Leasing

ERIC Educational Resources Information Center

Aldridge, Robb

2005-01-01

Ownership means control. What one buys is easier to manage with respect to upgrading or getting rid of equipment that is no longer adequate for the job. Purchasing can put severe demands on cash flow, however, so sometimes the budget drives the decision to lease. Not surprisingly, leasing reverses the advantages and disadvantages of ownership. For…

Developing a Resilient Green Cellular Network

DTIC Science & Technology

2013-12-01

to provide BS autonomy from grid power through alternative energy, such as: fuel cells and xiii renewable photovoltaic (PV), wind energy...stations with adequate backup power or utilizing alternative/renewable energy technology such as photovoltaic or wind power to allow them to...mitigating strategies with the consensus view on BSs migrating away from grid power , to renewable energy ( photovoltaic ), and alternative fuels. 40

Evaluative Case Study of the Effectiveness of Professional Development Elements When Implementing a Learning Management System in Elementary Education

ERIC Educational Resources Information Center

Beams, Tara E.

2017-01-01

As school districts across the country attempt to comply with federal and state mandates to effectively integrate technology into today's teaching and learning, they must face the challenge of also developing professional development plans which will adequately and successfully prepare teachers for implementing these new resources and these new…

Survey of wildlife rehabilitators on infection control and personal protective behaviors

USGS Publications Warehouse

Saito, E.K.; Shreve, A.A.

2005-01-01

Wildlife veterinarians and rehabilitators treat a number of wildlife species that can carry infectious and zoonotic diseases. These can rapidly spread within a facility and to the caregivers when adequate measures are not taken. Financial constraints and reduced access to laboratories often limit identification of disease etiology of many cases admitted into wildlife rehabilitation centers. A survey to investigate wildlife rehabilitator illness during the 2002 West Nile virus season indicated that many rehabilitators do not follow adequate protective measures in their facilities and may not seek medical care when disease symptoms arise or even linger. The recommended precautions and proper infection control measures for those handling and housing wildlife cases should be discussed between rehabilitators and their attending veterinarian(s).

Machine Vision-Based Measurement Systems for Fruit and Vegetable Quality Control in Postharvest.

PubMed

Blasco, José; Munera, Sandra; Aleixos, Nuria; Cubero, Sergio; Molto, Enrique

Individual items of any agricultural commodity are different from each other in terms of colour, shape or size. Furthermore, as they are living thing, they change their quality attributes over time, thereby making the development of accurate automatic inspection machines a challenging task. Machine vision-based systems and new optical technologies make it feasible to create non-destructive control and monitoring tools for quality assessment to ensure adequate accomplishment of food standards. Such systems are much faster than any manual non-destructive examination of fruit and vegetable quality, thus allowing the whole production to be inspected with objective and repeatable criteria. Moreover, current technology makes it possible to inspect the fruit in spectral ranges beyond the sensibility of the human eye, for instance in the ultraviolet and near-infrared regions. Machine vision-based applications require the use of multiple technologies and knowledge, ranging from those related to image acquisition (illumination, cameras, etc.) to the development of algorithms for spectral image analysis. Machine vision-based systems for inspecting fruit and vegetables are targeted towards different purposes, from in-line sorting into commercial categories to the detection of contaminants or the distribution of specific chemical compounds on the product's surface. This chapter summarises the current state of the art in these techniques, starting with systems based on colour images for the inspection of conventional colour, shape or external defects and then goes on to consider recent developments in spectral image analysis for internal quality assessment or contaminant detection.

User acceptance of a picture archiving and communication system. Applying the unified theory of acceptance and use of technology in a radiological setting.

PubMed

Duyck, P; Pynoo, B; Devolder, P; Voet, T; Adang, L; Vercruysse, J

2008-01-01

The aim of this study is to gain insight into the individual user acceptance of PACS by the radiology department staff of the Ghent University Hospital. Hereto a basic--direct effects only--form of UTAUT was assessed. Ninety-four questionnaires were distributed and 56 usable questionnaires were returned (19 radiologists - 37 technologists). The questionnaire consisted of scales of Venkatesh et al. [13] for performance expectancy (PE), effort expectancy (EE), facilitating conditions (FC), social influence (SI), self-efficacy (SE), attitude (ATT), anxiety (ANX) and behavioral intention (BI), and a scale of Moore et al. [22] to assess the perceived voluntariness of PACS-use. The reliability of all scales, except FC and voluntariness, was acceptable to good. The voluntariness scale was divided into a mandatoriness (MAN) and a voluntariness (VOL) measure. Both radiologists and technologists seem to welcome PACS, with radiologists having higher ratings on PE, EE, ATT, VOL and BI. Only PE and FC were salient for predicting BI, while EE and SI were not salient. Variance explained in behavioral intention to use PACS was 48%. Both radiologists and technologists were positive towards PACS and had strong intentions to use PACS. As other healthcare professionals, they appear to make their technology acceptance decision independent from their superiors, hereby focusing on usefulness rather than on ease of use. It is also important that support is supplied. Basic UTAUT is an adequate model to assess technology acceptance in a radiological setting.

Hot rocket plume experiment - Survey and conceptual design. [of rhenium-iridium bipropellants

NASA Technical Reports Server (NTRS)

Millard, Jerry M.; Luan, Taylor W.; Dowdy, Mack W.

1992-01-01

Attention is given to a space-borne engine plume experiment study to fly an experiment which will both verify and quantify the reduced contamination from advanced rhenium-iridium earth-storable bipropellant rockets (hot rockets) and provide a correlation between high-fidelity, in-space measurements and theoretical plume and surface contamination models. The experiment conceptual design is based on survey results from plume and contamination technologists throughout the U.S. With respect to shuttle use, cursory investigations validate Hitchhiker availability and adaptability, adequate remote manipulator system (RMS) articulation and dynamic capability, acceptable RMS attachment capability, adequate power and telemetry capability, and adequate flight altitude and attitude/orbital capability.

Linear Combinations of Multiple Outcome Measures to Improve the Power of Efficacy Analysis ---Application to Clinical Trials on Early Stage Alzheimer Disease

PubMed Central

Xiong, Chengjie; Luo, Jingqin; Morris, John C; Bateman, Randall

2018-01-01

Modern clinical trials on Alzheimer disease (AD) focus on the early symptomatic stage or even the preclinical stage. Subtle disease progression at the early stages, however, poses a major challenge in designing such clinical trials. We propose a multivariate mixed model on repeated measures to model the disease progression over time on multiple efficacy outcomes, and derive the optimum weights to combine multiple outcome measures by minimizing the sample sizes to adequately power the clinical trials. A cross-validation simulation study is conducted to assess the accuracy for the estimated weights as well as the improvement in reducing the sample sizes for such trials. The proposed methodology is applied to the multiple cognitive tests from the ongoing observational study of the Dominantly Inherited Alzheimer Network (DIAN) to power future clinical trials in the DIAN with a cognitive endpoint. Our results show that the optimum weights to combine multiple outcome measures can be accurately estimated, and that compared to the individual outcomes, the combined efficacy outcome with these weights significantly reduces the sample size required to adequately power clinical trials. When applied to the clinical trial in the DIAN, the estimated linear combination of six cognitive tests can adequately power the clinical trial. PMID:29546251

Measurement of Behavioral and Emotional Outcomes of Youth in Foster Care: Investigation of the Roles of Age and Placement Type.

PubMed

Gabrielli, Joy; Jackson, Yo; Brown, Shaquanna

2015-09-01

The Behavioral Assessment System for Children-2 (BASC-2) is used to assess behavioral and emotional outcomes for youth. Research providing evidence for use of the BASC-2 parent-report form historically has included biological parents reporting on their children (Reynolds and Kamphaus 2004). For youth residing in out-of-home placements through enrollment in foster care, caregivers reporting on their functioning may include foster parents or residential staff. Given the significant adverse mental health outcomes for youth in foster care and the need to adequately assess adjustment in foster care, the purpose of the study was to evaluate the measurement properties of caregivers' report on the parent report form (PRS) of the BASC-2 in foster care youth. Using 479 respondents, a measurement model was fit to the data demonstrating adequate fit across Internalizing Problems, Externalizing Problems, and Adaptive Skills. Further, a comparison of measurement properties across child and adolescent groups and groups of youth residing in residential facilities versus foster homes was conducted. Factorial invariance and latent means also were assessed. The BASC-2 PRS was found to be an adequate assessment of psychological outcomes for youth in foster care when completed by foster parents or residential facility staff.

Measurement of Behavioral and Emotional Outcomes of Youth in Foster Care: Investigation of the Roles of Age and Placement Type

PubMed Central

Gabrielli, Joy; Jackson, Yo; Brown, Shaquanna

2014-01-01

The Behavioral Assessment System for Children–2 (BASC-2) is used to assess behavioral and emotional outcomes for youth. Research providing evidence for use of the BASC-2 parent-report form historically has included biological parents reporting on their children (Reynolds and Kamphaus 2004). For youth residing in out-of-home placements through enrollment in foster care, caregivers reporting on their functioning may include foster parents or residential staff. Given the significant adverse mental health outcomes for youth in foster care and the need to adequately assess adjustment in foster care, the purpose of the study was to evaluate the measurement properties of caregivers’ report on the parent report form (PRS) of the BASC-2 in foster care youth. Using 479 respondents, a measurement model was fit to the data demonstrating adequate fit across Internalizing Problems, Externalizing Problems, and Adaptive Skills. Further, a comparison of measurement properties across child and adolescent groups and groups of youth residing in residential facilities versus foster homes was conducted. Factorial invariance and latent means also were assessed. The BASC-2 PRS was found to be an adequate assessment of psychological outcomes for youth in foster care when completed by foster parents or residential facility staff. PMID:26478653

Rapid thermal cycling of new technology solar array blanket coupons

NASA Technical Reports Server (NTRS)

Scheiman, David A.; Smith, Bryan K.; Kurland, Richard M.; Mesch, Hans G.

1990-01-01

NASA Lewis Research Center is conducting thermal cycle testing of a new solar array blanket technologies. These technologies include test coupons for Space Station Freedom (SSF) and the advanced photovoltaic solar array (APSA). The objective of this testing is to demonstrate the durability or operational lifetime of the solar array interconnect design and blanket technology within a low earth orbit (LEO) or geosynchronous earth orbit (GEO) thermal cycling environment. Both the SSF and the APSA array survived all rapid thermal cycling with little or no degradation in peak performance. This testing includes an equivalent of 15 years in LEO for SSF test coupons and 30 years of GEO plus ten years of LEO for the APSA test coupon. It is concluded that both the parallel gap welding of the SSF interconnects and the soldering of the APSA interconnects are adequately designed to handle the thermal stresses of space environment temperature extremes.

Broadband Optical Access Technologies to Converge towards a Broadband Society in Europe

NASA Astrophysics Data System (ADS)

Coudreuse, Jean-Pierre; Pautonnier, Sophie; Lavillonnière, Eric; Didierjean, Sylvain; Hilt, Benoît; Kida, Toshimichi; Oshima, Kazuyoshi

This paper provides insights on the status of broadband optical access market and technologies in Europe and on the expected trends for the next generation optical access networks. The final target for most operators, cities or any other player is of course FTTH (Fibre To The Home) deployment although we can expect intermediate steps with copper or wireless technologies. Among the two candidate architectures for FTTH, PON (Passive Optical Network) is by far the most attractive and cost effective solution. We also demonstrate that Ethernet based optical access network is very adequate to all-IP networks without any incidence on the level of quality of service. Finally, we provide feedback from a FTTH pilot network in Colmar (France) based on Gigabit Ethernet PON technology. The interest of this pilot lies on the level of functionality required for broadband optical access networks but also on the development of new home network configurations.

The Social Construction of Inflammatory Bowel Disease Using Social Media Technologies.

PubMed

Frohlich, Dennis Owen

2016-11-01

Many people with inflammatory bowel disease (IBD), sometimes lacking adequate face-to-face sources of support, turn to online communities to meet others with the disease. These online communities are places of support and education, but through the use of social media communication technologies, people with IBD are redefining what it means to live with the disease. This ethnographic study followed 14 online communities to understand how people with IBD used social media technologies to construct their own meanings about living with the disease. The following redefinitions were observed: the refiguring of the body is beautiful; inflammatory bowel disease is serious and deadly; inflammatory bowel disease is humorous; the disease makes one stronger; and the disease is invisible, but needs to be made visible. This study will help health communication scholars understand how technology is appropriated by patients, and will help practitioners understand how their patients conceptualize their disease.

Application of gas-fluid atomization technology in ultrosonic vibration cutting titanium alloy workpiece

NASA Astrophysics Data System (ADS)

Zhou, Zhimin; Zhang, Yuangliang; Li, Xiaoyan; Sun, Baoyuan

2009-11-01

To further improve machined surface quality of diamond cutting titanium workpiece and reduce diamond tool wear, it puts forward a kind of machining technology with mixture of carbon dioxide gas, water and vegetable oil atomized mist as cooling media in the paper. The cooling media is sprayed to cutting area through gas-liquid atomizer device to achieve purpose of cooling, lubricating, and protecting diamond tool. Experiments indicate that carbon dioxide gas can touch cutting surface more adequately through using gas-liquid atomization technology, which makes iron atoms of cutting surface cause a chemical reaction directly with carbon in carbon dioxide gas and reduce graphitizing degree of diamond tool. Thus, this technology of using gas-liquid atomization and ultrasonic vibration together for cutting Titanium Alloy is able to improve machined surface quality of workpiece and slow of diamond tool wear.

Sodium-NaK engineering handbook. Volume III. Sodium systems, safety, handling, and instrumentation. [LMFBR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Foust, O J

1978-01-01

The handbook is intended for use by present and future designers in the Liquid Metals Fast Breeder Reactor (LMFBR) Program and by the engineering and scientific community performing other type investigation and exprimentation requiring high-temperature sodium and NaK technology. The arrangement of subject matter progresses from a technological discussion of sodium and sodium--potassium alloy (NaK) to discussions of varius categories and uses of hardware in sodium and NaK systems. Emphasis is placed on sodium and NaK as heat-transport media. Sufficient detail is included for basic understanding of sodium and NaK technology and of technical aspects of sodium and NaK componentsmore » and instrument systems. Information presented is considered adequate for use in feasibility studies and conceptual design, sizing components and systems, developing preliminary component and system descriptions, identifying technological limitations and problem areas, and defining basic constraints and parameters.« less

Sustainable engineered processes to mitigate the global arsenic crisis in drinking water: challenges and progress.

PubMed

Sarkar, Sudipta; Greenleaf, John E; Gupta, Anirban; Uy, Davin; Sengupta, Arup K

2012-01-01

Millions of people around the world are currently living under the threat of developing serious health problems owing to ingestion of dangerous concentrations of arsenic through their drinking water. In many places, treatment of arsenic-contaminated water is an urgent necessity owing to a lack of safe alternative sources. Sustainable production of arsenic-safe water from an arsenic-contaminated raw water source is currently a challenge. Despite the successful development in the laboratory of technologies for arsenic remediation, few have been successful in the field. A sustainable arsenic-remediation technology should be robust, composed of local resources, and user-friendly as well as must attach special consideration to the social, economic, cultural, traditional, and environmental aspects of the target community. One such technology is in operation on the Indian subcontinent. Wide-scale replication of this technology with adequate improvisation can solve the arsenic crisis prevalent in the developing world.