Science.gov

Sample records for adequate system performance

  1. Gamed by the System: Adequate Yearly Progress as an Indicator of Persistently Low-Achieving School Performance

    ERIC Educational Resources Information Center

    Hochbein, Craig; Mitchell, Amanda M.; Pollio, Martin

    2013-01-01

    The recent policy focus on the turnaround of persistently low-achieving schools has generated considerable debate about the reforms needed to dramatically and quickly increase school performance. The purpose of this article is not to focus on specific turnaround interventions, but rather on the identification of schools slated to receive these…

  2. Arabidopsis: An Adequate Model for Dicot Root Systems?

    PubMed

    Zobel, Richard W

    2016-01-01

    The Arabidopsis root system is frequently considered to have only three classes of root: primary, lateral, and adventitious. Research with other plant species has suggested up to eight different developmental/functional classes of root for a given plant root system. If Arabidopsis has only three classes of root, it may not be an adequate model for eudicot plant root systems. Recent research, however, can be interpreted to suggest that pre-flowering Arabidopsis does have at least five (5) of these classes of root. This then suggests that Arabidopsis root research can be considered an adequate model for dicot plant root systems. PMID:26904040

  3. Adequate drainage system design for heap leaching structures.

    PubMed

    Majdi, Abbas; Amini, Mehdi; Nasab, Saeed Karimi

    2007-08-17

    The paper describes an optimum design of a drainage system for a heap leaching structure which has positive impacts on both mine environment and mine economics. In order to properly design a drainage system the causes of an increase in the acid level of the heap which in turn produces severe problems in the hydrometallurgy processes must be evaluated. One of the most significant negative impacts induced by an increase in the acid level within a heap structure is the increase of pore acid pressure which in turn increases the potential of a heap-slide that may endanger the mine environment. In this paper, initially the thickness of gravelly drainage layer is determined via existing empirical equations. Then by assuming that the calculated thickness is constant throughout the heap structure, an approach has been proposed to calculate the required internal diameter of the slotted polyethylene pipes which are used for auxiliary drainage purposes. In order to adequately design this diameter, the pipe's cross-sectional deformation due to stepped heap structure overburden pressure is taken into account. Finally, a design of an adequate drainage system for the heap structure 2 at Sarcheshmeh copper mine is presented and the results are compared with those calculated by exiting equations. PMID:17321044

  4. Splenic autotransplantation and the immune system. Adequate testing required for evaluation of effect.

    PubMed Central

    Timens, W; Leemans, R

    1992-01-01

    The risk of severe infections after splenectomy, even after many years, is now well established. In attempts to prevent these infections, spleen-saving techniques, including autotransplantation of spleen fragments, have been performed, when possible in combination with vaccination. The problem in autotransplantation is the evaluation of functional activity. The results of the tests used until now often do not seem to correlate very well with the risk of developing an overwhelming postsplenectomy infection (OPSI). This may be related to the fact that the tests used evaluate general functions, and not specific spleen-related functions, such as the capacity to mount a primary response to certain polysaccharide antigens present in the capsule of bacteria known to cause OPSI. In this review, the significance of the spleen in the human immune system is discussed and the effects of splenectomy are described, including the precautions that can be taken to diminish the risk of postsplenectomy infections and sepsis. It appears that postsplenectomy vaccination is more successful when recently developed protein-conjugated polysaccharide vaccines are used. Because the present testing of the function of spleen autotransplants is not adequate, we suggest that new tests should be developed, employing appropriate polysaccharide antigens. PMID:1543398

  5. Do measures commonly used in body image research perform adequately with African American college women?

    PubMed

    Kashubeck-West, Susan; Coker, Angela D; Awad, Germine H; Stinson, Rebecca D; Bledman, Rashanta; Mintz, Laurie

    2013-07-01

    This study examines reliability and validity estimates for 3 widely used measures in body image research in a sample of African American college women (N = 278). Internal consistency estimates were adequate (α coefficients above .70) for all measures, and evidence of convergent and discriminant validity was found. Confirmatory factor analyses failed to replicate the hypothesized factor structures of these measures. Exploratory factor analyses indicated that 4 factors found for the Sociocultural Attitudes Toward Appearance Questionnaire were similar to the hypothesized subscales, with fewer items. The factors found for the Multidimensional Body-Self Relations Questionnaire-Appearance Scales and the Body Dissatisfaction subscale of the Eating Disorders Inventory-3 were not similar to the subscales developed by the scale authors. Validity and reliability evidence is discussed for the new factors. PMID:23731233

  6. 40 CFR 141.522 - How does the State determine whether my system's watershed control requirements are adequate?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... my system's watershed control requirements are adequate? 141.522 Section 141.522 Protection of... Additional Watershed Control Requirements for Unfiltered Systems § 141.522 How does the State determine whether my system's watershed control requirements are adequate? During an onsite inspection...

  7. 40 CFR 141.522 - How does the State determine whether my system's watershed control requirements are adequate?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... my system's watershed control requirements are adequate? 141.522 Section 141.522 Protection of... Additional Watershed Control Requirements for Unfiltered Systems § 141.522 How does the State determine whether my system's watershed control requirements are adequate? During an onsite inspection...

  8. 40 CFR 141.522 - How does the State determine whether my system's watershed control requirements are adequate?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... my system's watershed control requirements are adequate? 141.522 Section 141.522 Protection of... Additional Watershed Control Requirements for Unfiltered Systems § 141.522 How does the State determine whether my system's watershed control requirements are adequate? During an onsite inspection...

  9. 40 CFR 141.522 - How does the State determine whether my system's watershed control requirements are adequate?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... my system's watershed control requirements are adequate? 141.522 Section 141.522 Protection of... Additional Watershed Control Requirements for Unfiltered Systems § 141.522 How does the State determine whether my system's watershed control requirements are adequate? During an onsite inspection...

  10. 40 CFR 141.522 - How does the State determine whether my system's watershed control requirements are adequate?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... my system's watershed control requirements are adequate? 141.522 Section 141.522 Protection of... Additional Watershed Control Requirements for Unfiltered Systems § 141.522 How does the State determine whether my system's watershed control requirements are adequate? During an onsite inspection...

  11. School Counselor Preparation in Kenya: Do Kenyan School Counselors Feel Adequately Prepared to Perform Their Roles?

    ERIC Educational Resources Information Center

    Wambu, Grace W.; Wickman, Scott A.

    2016-01-01

    School counselor training in Kenya is a relatively new phenomenon. This study examined Kenyan school counselors' perceptions of the adequacy of their preparedness to perform their roles within the school setting. The survey was administered to 105 school counselors in four counties. The findings revealed that Kenyan school counselors perceived…

  12. Does the mean adequately represent reading performance? Evidence from a cross-linguistic study

    PubMed Central

    Marinelli, Chiara V.; Horne, Joanna K.; McGeown, Sarah P.; Zoccolotti, Pierluigi; Martelli, Marialuisa

    2014-01-01

    Reading models are largely based on the interpretation of average data from normal or impaired readers, mainly drawn from English-speaking individuals. In the present study we evaluated the possible contribution of orthographic consistency in generating individual differences in reading behavior. We compared the reading performance of young adults speaking English (one of the most irregular orthographies) and Italian (a very regular orthography). In the 1st experiment we presented 22 English and 30 Italian readers with 5-letter words using the Rapid Serial Visual Presentation (RSVP) paradigm. In a 2nd experiment, we evaluated a new group of 26 English and 32 Italian proficient readers through the RSVP procedure and lists matched in the two languages for both number of phonemes and letters. The results of the two experiments indicate that English participants read at a similar rate but with much greater individual differences than the Italian participants. In a 3rd experiment, we extended these results to a vocal reaction time (vRT) task, examining the effect of word frequency. An ex-Gaussian distribution analysis revealed differences between languages in the size of the exponential parameter (tau) and in the variance (sigma), but not the mean, of the Gaussian component. Notably, English readers were more variable for both tau and sigma than Italian readers. The pattern of performance in English individuals runs counter to models of performance in timed tasks (Faust et al., 1999; Myerson et al., 2003) which envisage a general relationship between mean performance and variability; indeed, this relationship does not hold in the case of the English participants. The present data highlight the importance of developing reading models that not only capture mean level performance, but also variability across individuals, especially in order to account for cross-linguistic differences in reading behavior. PMID:25191289

  13. Adequate proverb interpretation is associated with performance on the independent living scales.

    PubMed

    Ahmed, Fayeza S; Miller, L Stephen

    2015-01-01

    The purpose of this study was to examine proverb interpretation performance and functional independence in older adults. From the limited literature on proverb interpretation in aging and its conceptualization as an executive function, it was hypothesized that proverb interpretation would be related to functional independence similar to other executive functions. Tests of proverb interpretation, additional executive functions, and functional ability were administered to nondemented older adults. Results showed that proverb interpretation accounted for a significant amount of unique variance of functional ability scores. This supports including a measure of proverb interpretation to the assessment of older adults. PMID:25313441

  14. Evaluation of catheter-manometer systems for adequate intravascular blood pressure measurements in small animals.

    PubMed

    Idvall, J; Aronsen, K F; Lindström, K; Ulmsten, U

    1977-09-30

    Various catheter-manometer systems possible for intravascular blood pressure measurments on rats have been elaborated and tested in vitro and in vivo. Using a pressure-step calibrator, it was observed from in vitro studies that microtransducers had superior frequency response compared to conventional transducers. Of the catheters tested, Pe-90 tapered to a 40 mm tip with an inner diameter of 0.3 mm had the best frequency response as judged from fall and settling times. Because of the damping effect, tapering increased fall time to 1.8 ms, which was still quite acceptable. By the same token settling time was minimized to 22.4 ms. With a special calculation method the theoretical percentile fault of the recordings was estimated to be 9.66%. When the measurement error was calculated from the actual in vivo recordings, it was found to be no more than 2.7%. These results show that the technique described is adequate for continuous intravascular blood pressure recordings on small animals. Finally it is emphasized that careful handling of the catheters and avoidance of stopcocks and air bubbles are essential for obtaining accurate and reproducible values. PMID:928971

  15. Are treatment guides and rational drug use policies adequately exploited in combating respiratory system diseases?

    PubMed

    Dogan, Mustafa; Mutlu, Levent C; Yilmaz, İbrahim; Bilir, Bulent; Varol Saracoglu, Gamze; Yildirim Guzelant, Aliye

    2016-01-01

    The aim of the present study was to increase awareness regarding the rational use of medicines. The data were obtained via the Material Resources Management System Module of the Ministry of Health. For the appropriateness of treatments, the Global Initiative for Asthma, the Global Initiative for Chronic Obstructive Lung Disease, and the guidelines for the rational use of medicines were used. We also investigated whether any de-escalation method or physical exercise was performed. Statistical analyses were performed using descriptive statistics to determine the mean, standard deviation, and frequency. The results showed that healthcare providers ignored potential drug reactions or adverse interactions, and reflecting the lack of adherence to the current treatment guides, 35.8% irrational use of medicines was recorded. Thus, de-escalation methods should be used to decrease costs or narrow the antibiotic spectrum, antibiotic selection should consider the resistance patterns, culturing methods should be analyzed, and monotherapy should be preferred over combination treatments. PMID:26166817

  16. MR Scanner Systems Should Be Adequately Characterized in Diffusion-MRI of the Breast

    PubMed Central

    Giannelli, Marco; Sghedoni, Roberto; Iacconi, Chiara; Iori, Mauro; Traino, Antonio Claudio; Guerrisi, Maria; Mascalchi, Mario; Toschi, Nicola; Diciotti, Stefano

    2014-01-01

    Breast imaging represents a relatively recent and promising field of application of quantitative diffusion-MRI techniques. In view of the importance of guaranteeing and assessing its reliability in clinical as well as research settings, the aim of this study was to specifically characterize how the main MR scanner system-related factors affect quantitative measurements in diffusion-MRI of the breast. In particular, phantom acquisitions were performed on three 1.5 T MR scanner systems by different manufacturers, all equipped with a dedicated multi-channel breast coil as well as acquisition sequences for diffusion-MRI of the breast. We assessed the accuracy, inter-scan and inter-scanner reproducibility of the mean apparent diffusion coefficient measured along the main orthogonal directions () as well as of diffusion-tensor imaging (DTI)-derived mean diffusivity (MD) measurements. Additionally, we estimated spatial non-uniformity of (NU) and MD (NUMD) maps. We showed that the signal-to-noise ratio as well as overall calibration of high strength diffusion gradients system in typical acquisition sequences for diffusion-MRI of the breast varied across MR scanner systems, introducing systematic bias in the measurements of diffusion indices. While and MD values were not appreciably different from each other, they substantially varied across MR scanner systems. The mean of the accuracies of measured and MD was in the range [−2.3%,11.9%], and the mean of the coefficients of variation for and MD measurements across MR scanner systems was 6.8%. The coefficient of variation for repeated measurements of both and MD was < 1%, while NU and NUMD values were <4%. Our results highlight that MR scanner system-related factors can substantially affect quantitative diffusion-MRI of the breast. Therefore, a specific quality control program for assessing and monitoring the performance of MR scanner systems for diffusion-MRI of the breast is

  17. Practices in adequate structural design. [of space vehicles and space systems

    NASA Technical Reports Server (NTRS)

    Ryan, Robert S.

    1989-01-01

    An account is given of the guidelines for safe and reliable space vehicle design, especially in the structural engineering area, which have been formulated by NASA in the aftermath of the Space Shuttle Challenger accident in 1986. Illustrative examples are presented from state-of-the-art, performance-driven hardware whose design ineluctably gives rise to a high sensitivity to small variations and uncertainties. It is recommended that such hardware be designed with a view to easy inspectability and manufacturability, with emphasis on the role played in system structures by fracture mechanics. Static and dynamic coupling effects must be precluded wherever possible.

  18. Performance, Performance System, and High Performance System

    ERIC Educational Resources Information Center

    Jang, Hwan Young

    2009-01-01

    This article proposes needed transitions in the field of human performance technology. The following three transitions are discussed: transitioning from training to performance, transitioning from performance to performance system, and transitioning from learning organization to high performance system. A proposed framework that comprises…

  19. Adequate Systemic Perfusion Maintained by a CentriMag during Acute Heart Failure

    PubMed Central

    Favaloro, Roberto R.; Bertolotti, Alejandro; Diez, Mirta; Favaloro, Liliana; Gomez, Carmen; Peradejordi, Margarita; Trentadue, Julio; Hellman, Lorena; Arzani, Yanina; Otero, Pilar Varela

    2008-01-01

    Mechanical circulatory support during severe acute heart failure presents options for myocardial recovery or cardiac replacement. Short-term circulatory support with the newest generation of magnetically levitated centrifugal-flow pumps affords several potential advantages. Herein, we present our experience with such a pump—the CentriMag® (Levitronix LLC; Waltham, Mass) centrifugal-flow ventricular assist device—in 4 critically ill patients who were in cardiogenic shock. From November 2007 through March 2008, 3 patients were supported after cardiac surgery, and 1 after chronic heart failure worsened. Two patients were bridged to heart transplantation, and 2 died during support. Perfusion during support was evaluated in terms of serum lactic acid levels and oxygenation values. In all of the patients, the CentriMag's pump flow was adequate, and continuous mechanical ventilation support was provided. Lactic acid levels substantially improved with CentriMag support and were maintained at near-normal levels throughout. At the same time, arterial pH, PO2, and carbon dioxide levels remained within acceptable ranges. No thromboembolic events or mechanical failures occurred. Our experience indicates that short-term use of the CentriMag ventricular assist device during acute heart failure can restore and adequately support circulation until recovery or until the application of definitive therapy. PMID:18941648

  20. Contemporary Proton Therapy Systems Adequately Protect Patients from Exposure to Stray Radiation

    PubMed Central

    Newhauser, Wayne D.; Fontenot, Jonas D.; Taddei, Phillip J.; Mirkovic, Dragan; Giebeler, Annelise; Zhang, Rui; Mahajan, Anita; Kornguth, David; Stovall, Marilyn; Yepes, Pablo; Woo, Shiao; Mohan, Radhe

    2010-01-01

    Proton beam therapy has provided safe and effective treatments for a variety of adult cancers. In recent years, there has been increasing interest in utilizing proton therapy for pediatric cancers because it allows better sparing of healthy tissues. Minimizing exposures of normal tissues is especially important in children because they are highly susceptible to consequential late effects, including the development of a radiogenic second cancer, which may occur years or even decades after treatment of the first cancer. While the dosimetric advantage of therapeutic proton beams is well understood, relatively little attention has been paid to the whole-body exposure to stray neutron radiation that is inherent in proton therapy. In this report, we review the physical processes that lead to neutron exposures, discuss the potential for mitigating these exposures using advanced proton beam delivery systems, and present a comparative analysis of predicted second cancer incidence following various external beam therapies. In addition, we discuss uncertainties in the relative biological effectiveness of neutrons for carcinogenesis and the impact that these uncertainties have on second-cancer risk predictions for survivors of adult and childhood cancer who receive proton therapy. PMID:20844607

  1. Contemporary Proton Therapy Systems Adequately Protect Patients from Exposure to Stray Radiation

    NASA Astrophysics Data System (ADS)

    Newhauser, Wayne D.; Fontenot, Jonas D.; Taddei, Phillip J.; Mirkovic, Dragan; Giebeler, Annelise; Zhang, Rui; Mahajan, Anita; Kornguth, David; Stovall, Marilyn; Yepes, Pablo; Woo, Shiao; Mohan, Radhe

    2009-03-01

    Proton beam therapy has provided safe and effective treatments for a variety of adult cancers. In recent years, there has been increasing interest in utilizing proton therapy for pediatric cancers because it allows better sparing of healthy tissues. Minimizing exposures of normal tissues is especially important in children because they are highly susceptible to consequential late effects, including the development of a radiogenic second cancer, which may occur years or even decades after treatment of the first cancer. While the dosimetric advantage of therapeutic proton beams is well understood, relatively little attention has been paid to the whole-body exposure to stray neutron radiation that is inherent in proton therapy. In this report, we review the physical processes that lead to neutron exposures, discuss the potential for mitigating these exposures using advanced proton beam delivery systems, and present a comparative analysis of predicted second cancer incidence following various external beam therapies. In addition, we discuss uncertainties in the relative biological effectiveness of neutrons for carcinogenesis and the impact that these uncertainties have on second-cancer risk predictions for survivors of adult and childhood cancer who receive proton therapy.

  2. Contemporary Proton Therapy Systems Adequately Protect Patients from Exposure to Stray Radiation

    SciTech Connect

    Newhauser, Wayne D.; Fontenot, Jonas D.; Taddei, Phillip J.; Mirkovic, Dragan; Giebeler, Annelise; Zhang Rui; Mahajan, Anita; Kornguth, David; Stovall, Marilyn; Woo, Shiao; Mohan, Radhe; Yepes, Pablo

    2009-03-10

    Proton beam therapy has provided safe and effective treatments for a variety of adult cancers. In recent years, there has been increasing interest in utilizing proton therapy for pediatric cancers because it allows better sparing of healthy tissues. Minimizing exposures of normal tissues is especially important in children because they are highly susceptible to consequential late effects, including the development of a radiogenic second cancer, which may occur years or even decades after treatment of the first cancer. While the dosimetric advantage of therapeutic proton beams is well understood, relatively little attention has been paid to the whole-body exposure to stray neutron radiation that is inherent in proton therapy. In this report, we review the physical processes that lead to neutron exposures, discuss the potential for mitigating these exposures using advanced proton beam delivery systems, and present a comparative analysis of predicted second cancer incidence following various external beam therapies. In addition, we discuss uncertainties in the relative biological effectiveness of neutrons for carcinogenesis and the impact that these uncertainties have on second-cancer risk predictions for survivors of adult and childhood cancer who receive proton therapy.

  3. An Examination of Principal Leadership Styles and Their Influence on School Performance as Measured by Adequate Yearly Progress at Selected Title I Elementary Schools in South Carolina

    ERIC Educational Resources Information Center

    Martin, Tammy Faith

    2012-01-01

    The purpose of this study was to examine principal leadership styles and their influence on school performance as measured by adequate yearly progress at selected Title I schools in South Carolina. The main focus of the research study was to complete descriptive statistics on principal leadership styles in schools that met or did not meet adequate…

  4. ADEQUATE DIETARY PROTEIN IS ASSOCIATED WITH BETTER PHYSICAL PERFORMANCE AMONG POST-MENOPAUSAL WOMEN 60–90 YEARS

    PubMed Central

    Gregorio, L.; Brindisi, J.; Kleppinger, A.; Sullivan, R.; Mangano, K.M; Bihuniak, J.D.; Kenny, A.M.; Kerstetter, J.E.; Insogna, K.L.

    2015-01-01

    Objectives Sarcopenia, the involuntary loss of skeletal muscle with age, affects up to one-quarter of older adults. Evidence indicates a positive association between dietary protein intake and lean muscle mass and strength among older persons, but information on dietary protein’s effect on physical performance in older adults has received less attention. Design Cross-sectional observational analysis of the relationship of dietary protein on body composition and physical performance. Setting Clinical research center. Participants 387 healthy women aged 60 – 90 years (mean 72.7 ± 7.0 y). Measurements Measures included body composition (fat-free mass, appendicular skeletal mass and fat mass) via dual x-ray absorptiometry (DXA), physical performance (Physical Performance Test [PPT] and Short Physical Performance Battery [SPPB]), handgrip strength, Physical Activity Scale in the Elderly (PASE), quality of life measure (SF-8), falls, fractures, nutrient and macromolecule intake (four-day food record). Independent samples t-tests determined mean differences between the above or below RDA protein groups. Statistical Analysis Analysis of covariance was used to control for body mass index (BMI) between groups when assessing physical performance, physical activity and health-related quality of life. Results The subjects consumed an average of 72.2 g protein/day representing 1.1 g protein/kg body weight/day. Subjects were categorized as below the recommended daily allowance (RDA) for protein (defined as less than 0.8 g protein/kg) or at or above the RDA (equal to or higher than 0.8 g protein/kg). Ninety-seven subjects (25%) were in the low protein group, and 290 (75%) were in the higher protein group. Women in the higher protein group had lower body mass, including fat and lean mass, and fat-to-lean ratio than those in the lower-protein group (p <0.001). Composite scores of upper and lower extremity strength were impaired in the group with low protein intake; SPPB score

  5. TAM 304 wheat – Adapted to the adequate rainfall or high-input irrigation production system in the Southern Great Plains

    Technology Transfer Automated Retrieval System (TEKTRAN)

    TAM 304 wheat is a medium-early hard red winter wheat. It is a great dryland or semi-irrigated wheat. TAM 304 performs best under adequate rainfall, limited irrigation, or irrigation, but does not perform as well under extended drought. TAM 304 performs exceptionally well under foliar disease pressu...

  6. Performance Measurement Analysis System

    1989-06-01

    The PMAS4.0 (Performance Measurement Analysis System) is a user-oriented system designed to track the cost and schedule performance of Department of Energy (DOE) major projects (MPs) and major system acquisitions (MSAs) reporting under DOE Order 5700.4A, Project Management System. PMAS4.0 provides for the analysis of performance measurement data produced from management control systems complying with the Federal Government''s Cost and Schedule Control Systems Criteria.

  7. The land component of the global climate system with adequate spatial resolution. Final report, September 1, 1991--August 31, 1994

    SciTech Connect

    Dickinson, R.E.; Hahmann, A.N.; Zeng, X.; Chen, M.; Vaughan, J.; Auvine, B.A.

    1994-11-30

    The focus of the work done under this grant has been to couple global circulation models (in particular, the National Center for Atmospheric Research (NCAR) Community Climate Model Version 2 (CCM2)) to a land-surface model at a much finer mesh than that used for the atmospheric processes. The end objective has been to incorporate into the CHAMMP modeling system a state-of-the-art land model on a mesh independent of the atmospheric model resolution. Efforts have emphasized the following: development and graphical displays of the fine-mesh land surface boundary conditions; the data structures required to carry out integrations on the land fine-mesh; the physical parameterization required to diaggregate model precipitation; analyses of the NCAR 10-year control simulation of the frozen version of CM2/BATS; implementation of changes in the cloud optical properties to mitgate excess incident solar radiation and temperatures over middle latitudes in the Northern Hemisphere summer; prototype development of the CCM2/BASTS fine-mesh treatment.

  8. Ariel Performance Analysis System

    NASA Astrophysics Data System (ADS)

    Ariel, Gideon B.; Penny, M. A.; Saar, Dany

    1990-08-01

    The Ariel Performance Analysis System is a computer-based system for the measurement, analysis and presentation of human performance. The system is based on a proprietary technique for processing multiple high-speed film and video recordings of a subject's performance. It is noninvasive, and does not require wires, sensors, markers or reflectors. In addition, it is portable and does not require modification of the performing environment. The scale and accuracy of measurement can be set to whatever levels are required by the activity being performed.

  9. How relational systems perform

    SciTech Connect

    Date, C.J.

    1984-02-13

    Contrary to popular belief, relational DBMS can perform at least as well as, and quite possibly better than, older hierarchical or network systems. Ignoring the interference effects introduced when multiple transactions are run in parallel, the author concentrates on the performance of some given database transaction considered in isolation. The two principal factors determining the performance of such a transaction are, of course, the number of I/O operations and the pathlength (amount of CPU processing).

  10. Lithologic prediction from the stratal architecture of Plio-Pleistocene Gulf of Mexico: Are the eustatic depositional systems tract models adequate

    SciTech Connect

    Butler, M.L.; Self, G.A. )

    1991-03-01

    Climatic/eustatic cycles of the Plio-Pleistocene have been defined in the northern Gulf of Mexico and precisely tied to their associated sequences and lithologies by means of graphic correlation. This framework has provided the data necessary for a detailed empirical evaluation of the eustatic depositional systems tract models. The key to this evaluation is a eustatic sea-level curve derived from fossil and isotope data. A curve of this type has been defined for several sequences. Using this eustatic curve the actual lithofacies and position of the various systems tracts were directly compared to those predicted by the models. The evaluation of the data with respect to eustatic sea level yielded conclusions that are significantly different from those predicted by the models. The evaluation of the data with respect to eustatic sea level yielded conclusions that are significantly different from those predicted by the model. The most significant of these differences are: (1) significant amounts of sand were deposited in deep water during transgressive and highstand intervals; (2) the observed vertical succession of eustatic depositional systems tracts within a given sequence are transgressive, highstand, and lowstand, and (3) factors other than eustacy have been the dominant influence on facies distribution within the Plio-Pleistocene sequences studied. These results demonstrate that depositional systems tracts and internal facies distribution could not be adequately described by a single model. Therefore, sequence stratigraphic analysis should be empirically based and conducted within the context of the basin, instead of being model driven.

  11. Photovoltaic System Performance

    1989-09-25

    PVFORM4.0 is used to design a photovoltaic (PV) system using a set of design parameters which optimize the system's economic potential for the proposed location and the expected operating conditions. PVFORM3.3 has been used to determine PV system size and optimum mounting configuration. The anticipated electrical load determines the system size and the weather and the mounting configuration affect the system output. PVFORM4.0 uses program-supplied default values or their user-supplied equivalents for each of amore » large number of parameters describing the system and time-series data describing the environment to perform a series of hourly calculations to simulate the physical (photovoltaic) performance of a PV system for a one-year period. These iterative calculations sample the performance of the PV system throughout a simulated 365-day year of system operation. Within any simulated day on which system performance is sampled, the calculations are done hourly. The number of days sampled and the interval between them is determined by an input parameter. The results of these calculations are summarized on a monthly basis in output tables and an optional plot file. The program is applicable to grid interactive or stand-alone flat-plate systems. The grid interactive system is assumed to use power purchased from a local utility to supply that portion of the load not met by the simulated PV array. If the array produces more energy than can be consumed by the load, the excess energy is assumed to be sold back to the utility at a constant energy sellback price. If a stand-alone system is being modeled, the program assumes that all energy produced by the simulated PV array is first applied to the external load, and any excess is then used to charge the battery bank. Energy not consumed by the load or the batteries is considered to be wasted.« less

  12. Photovoltaic lighting system performance

    SciTech Connect

    Harrington, S.R.; Hund, T.D.

    1996-06-01

    The performance of 21 PV-powered low pressure sodium lighting systems on a multi-use has been documented in this paper. Specific areas for evaluation include the vandal resistant PV modules, constant voltage and on/off PV charge controllers, flooded deep-cycle lead-antimony and valve regulated lead-acid (VLRA) gel batteries, and low pressure sodium ballasts and lights. The PV lighting system maintenance intervals and lessons learned have been documented over the past 2.5 years. The above performance data has shown that with careful hardware selection, installation, and maintenance intervals the PV lighting systems will operate reliably.

  13. Development of electronic potential and current transducers suitable for gas insulated switchgear and adequate for application to substation digital control systems

    SciTech Connect

    Tokoro, K.; Harumoto, Y.; Ida, Y.; Mukae, H.; Ohno, Y.; Shimada, M.; Yamamoto, H.; Yoshida, Y.

    1982-10-01

    Substation Digital Control System (SDCS) had been developed for the future system controlling the large scale power system. For application of SDCS to Gas Insulated Switchgear (GIS), electronic potential and current transducers fit for GIS have been developed. This equipment is composed of a capacitive dividing type potential transducer, a low burden current transformer, an analogue-to-digital conversion unit and an optical fiber signal transmit system. Good performance is confirmed by the application tests simulating the field circumstances.

  14. System Performance Characterization

    SciTech Connect

    van Dam, M A

    2004-05-26

    Characterizing an adaptive optics (AO) system refers to understanding its performance and limitations. The goal of an AO system is to correct wavefront aberrations. The uncorrected aberrations, called the residual errors and referred to in what follows simply as the errors, degrade the image quality in the science camera. Understanding the source of these errors is a great aid in designing an AO system and optimizing its performance. This chapter explains how to estimate the wavefront error terms and the relationship between the wavefront error and the degradation of the image. The analysis deals with the particular case of a HartmannShack wavefront sensor (WFS) and a continuous deformable mirror (DM), although the principles involved can be applied to any AO system.

  15. High performance systems

    SciTech Connect

    Vigil, M.B.

    1995-03-01

    This document provides a written compilation of the presentations and viewgraphs from the 1994 Conference on High Speed Computing given at the High Speed Computing Conference, {open_quotes}High Performance Systems,{close_quotes} held at Gleneden Beach, Oregon, on April 18 through 21, 1994.

  16. Using Math and Reading Curriculum-Based Measurements to Predict State Mathematics Test Performance: Are Simple One-Minute Measures Technically Adequate?

    ERIC Educational Resources Information Center

    Jiban, Cynthia L.; Deno, Stanley L.

    2007-01-01

    This study investigated the technical adequacy of 3 simple, 1-min curriculum-based measurements (CBM) for predicting third (n = 35) and fifth (n = 49) graders' performance on a state standards test of mathematics. Measures included 2 numeric CBMs: a traditional basic facts measure and a new "cloze" math facts measure, designed to require deeper…

  17. Prevalence and correlates of adequate performance on a measure of abilities related to decisional capacity: differences among three standards for the MacCAT-CR in patients with schizophrenia.

    PubMed

    Dunn, Laura B; Palmer, Barton W; Appelbaum, Paul S; Saks, Elyn R; Aarons, Gregory A; Jeste, Dilip V

    2007-01-01

    Despite the availability of structured decision-making capacity assessment tools, insufficient guidance exists for applying their results. Investigators often use cutpoints on these instruments to identify potential subjects in need of further assessment or education. Yet, information is lacking regarding the effects of different cutpoints on the proportion and characteristics of individuals categorized as possessing adequate or impaired decisional abilities for consent to research. To demonstrate the potential impact of different standards, we informed 91 individuals, aged 50 or older with a diagnosis of schizophrenia or schizoaffective disorder, about a hypothetical clinical trial, and assessed their decisional abilities with the MacArthur Competence Assessment Tool for Clinical Research (MacCAT-CR). Three published MacCAT-CR-based standards were applied to participants' scores to examine the rates and correlates of categorical determinations of adequate performance. The three standards ranged in stringency: the most stringent incorporated cutpoints on all three of the major MacCAT-CR subscales (Understanding, Appreciation, and Reasoning); the other two standards required threshold performance only on the Understanding subscale. The most stringent standard resulted in a 57% rate of impaired performance; the intermediate standard, 19%; and the least stringent standard, 8%. Nearly half of the participants (n=45) were classified as having performed adequately by the least stringent standard yet inadequately by the most stringent. The majority of these 45 were impaired on the Appreciation subscale (n=9), Reasoning (n=15), or both (n=18). Cognitive functioning was correlated with performance status for the more stringent standards. These findings underscore the need for refinement of capacity assessment procedures and for improvements in the use of capacity assessment tools for screening purposes and to assist in categorical capacity determinations. PMID:17020803

  18. System performance conclusions

    NASA Technical Reports Server (NTRS)

    Arndt, G. D.

    1980-01-01

    The advantages and disadvantages of reducing power levels and using antennas with diameters smaller than 1 Km were evaluated if rectenna costs and land usage requirements become major factors, operating at 5800 megahertz should be considered. Three sequences (random, incoherent phasing, and concentric rings - center to edge) provided satisfactory performance in that the resultant sidelobe levels during startup/ shutdown were lower than the steady-state levels present during normal operations. Grating lobe peaks and scattered power levels were used to determine the array/subarray mechanical alignment requirements. The antenna alignment requirement is 1 min or 3 min depending on phase control configuration. System error parameters were defined to minimize scattered microwave power.

  19. Maryland Report Card: 2008 Performance Report. State and School Systems

    ERIC Educational Resources Information Center

    Maryland State Department of Education, 2008

    2008-01-01

    This paper presents the 2008 Maryland School Performance Report. It shows the academic performance results of the State and its 24 school systems. This report includes the results from the Maryland School Assessment (MSA) given in spring 2008, information about the Adequate Yearly Progress (AYP) measures required by the federal No Child Left…

  20. High Performance Work Systems and Firm Performance.

    ERIC Educational Resources Information Center

    Kling, Jeffrey

    1995-01-01

    A review of 17 studies of high-performance work systems concludes that benefits of employee involvement, skill training, and other high-performance work practices tend to be greater when new methods are adopted as part of a consistent whole. (Author)

  1. Practices in adequate structural design

    NASA Astrophysics Data System (ADS)

    Ryan, Robert S.

    An account is given of the guidelines for safe and reliable space vehicle design, especially in the structural engineering area, which have been formulated by NASA in the aftermath of the Space Shuttle Challenger accident in 1986. Illustrative examples are presented from state-of-the-art, performance-driven hardware whose design ineluctably gives rise to a high sensitivity to small variations and uncertainties. It is recommended that such hardware be designed with a view to easy inspectability and manufacturability, with emphasis on the role played in system structures by fracture mechanics. Static and dynamic coupling effects must be precluded wherever possible.

  2. Forecasting the Performance of Agroforestry Systems

    NASA Astrophysics Data System (ADS)

    Luedeling, E.; Shepherd, K.

    2014-12-01

    Agroforestry has received considerable attention from scientists and development practitioners in recent years. It is recognized as a cornerstone of many traditional agricultural systems, as well as a new option for sustainable land management in currently treeless agricultural landscapes. Agroforestry systems are diverse, but most manifestations supply substantial ecosystem services, including marketable tree products, soil fertility, water cycle regulation, wildlife habitat and carbon sequestration. While these benefits have been well documented for many existing systems, projecting the outcomes of introducing new agroforestry systems, or forecasting system performance under changing environmental or climatic conditions, remains a substantial challenge. Due to the various interactions between system components, the multiple benefits produced by trees and crops, and the host of environmental, socioeconomic and cultural factors that shape agroforestry systems, mechanistic models of such systems quickly become very complex. They then require a lot of data for site-specific calibration, which presents a challenge for their use in new environmental and climatic domains, especially in data-scarce environments. For supporting decisions on the scaling up of agroforestry technologies, new projection methods are needed that can capture system complexity to an adequate degree, while taking full account of the fact that data on many system variables will virtually always be highly uncertain. This paper explores what projection methods are needed for supplying decision-makers with useful information on the performance of agroforestry in new places or new climates. Existing methods are discussed in light of these methodological needs. Finally, a participatory approach to performance projection is proposed that captures system dynamics in a holistic manner and makes probabilistic projections about expected system performance. This approach avoids the temptation to take

  3. Practices in Adequate Structural Design

    NASA Technical Reports Server (NTRS)

    Ryan, Robert S.

    1989-01-01

    Structural design and verification of space vehicles and space systems is a very tricky and awe inspiring business, particularly for manned missions. Failures in the missions with loss of life is devastating personally and nationally. The scope of the problem is driven by high performance requirements which push state-of-the-art technologies, creating high sensitivites to small variations and uncertainties. Insurance of safe, reliable flight dictates the use of sound principles, procedures, analysis, and testing. Many of those principles which were refocused by the Space Shuttle Challenger (51-L) accident on January 26, 1986, and the activities conducted to insure safe shuttle reflights are discussed. The emphasis will be focused on engineering, while recognizing that project and project management are also key to success.

  4. Practices in adequate structural design

    NASA Astrophysics Data System (ADS)

    Ryan, Robert S.

    1989-01-01

    Structural design and verification of space vehicles and space systems is a very tricky and awe inspiring business, particularly for manned missions. Failures in the missions with loss of life is devastating personally and nationally. The scope of the problem is driven by high performance requirements which push state-of-the-art technologies, creating high sensitivites to small variations and uncertainties. Insurance of safe, reliable flight dictates the use of sound principles, procedures, analysis, and testing. Many of those principles which were refocused by the Space Shuttle Challenger (51-L) accident on January 26, 1986, and the activities conducted to insure safe shuttle reflights are discussed. The emphasis will be focused on engineering, while recognizing that project and project management are also key to success.

  5. Visualizing Parallel Computer System Performance

    NASA Technical Reports Server (NTRS)

    Malony, Allen D.; Reed, Daniel A.

    1988-01-01

    Parallel computer systems are among the most complex of man's creations, making satisfactory performance characterization difficult. Despite this complexity, there are strong, indeed, almost irresistible, incentives to quantify parallel system performance using a single metric. The fallacy lies in succumbing to such temptations. A complete performance characterization requires not only an analysis of the system's constituent levels, it also requires both static and dynamic characterizations. Static or average behavior analysis may mask transients that dramatically alter system performance. Although the human visual system is remarkedly adept at interpreting and identifying anomalies in false color data, the importance of dynamic, visual scientific data presentation has only recently been recognized Large, complex parallel system pose equally vexing performance interpretation problems. Data from hardware and software performance monitors must be presented in ways that emphasize important events while eluding irrelevant details. Design approaches and tools for performance visualization are the subject of this paper.

  6. Microwave system performance summary

    NASA Technical Reports Server (NTRS)

    Arndt, G. D.; Nalos, E. J.

    1980-01-01

    The design of the microwave system for the solar power satellite is described. Design modifications recommended include changes in phase control to the power module level, a reduction in allowable amplitude jitter, the use of metal matrix waveguides, and sequences for startup/shutdown procedures. Investigations into reshaping the beam pattern to improve overall rectenna collection efficiency and improve sidelobe control are surveyed.

  7. PV System Performance and Standards

    SciTech Connect

    Osterwald, C. R.

    2005-11-01

    This paper presents a brief overview of the status and accomplishments during fiscal year (FY) 2005 of the Photovoltaic (PV) System Performance and Standards Subtask, which is part of the PV Systems Engineering Project (a joint NREL-Sandia project).

  8. Adequate Funding for Educational Technology

    ERIC Educational Resources Information Center

    Angle, Jason B.

    2010-01-01

    Public schools are currently operating in a pressure-cooker of accountability systems in which they must teach students to high standards and meet ever increasing targets for student proficiency, or face increasingly severe sanctions. Into this mix is thrown educational technology and the funding for that technology. The literature espouses the…

  9. 40 CFR 51.354 - Adequate tools and resources.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 2 2011-07-01 2011-07-01 false Adequate tools and resources. 51.354... Requirements § 51.354 Adequate tools and resources. (a) Administrative resources. The program shall maintain the administrative resources necessary to perform all of the program functions including...

  10. 40 CFR 51.354 - Adequate tools and resources.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 2 2012-07-01 2012-07-01 false Adequate tools and resources. 51.354... Requirements § 51.354 Adequate tools and resources. (a) Administrative resources. The program shall maintain the administrative resources necessary to perform all of the program functions including...

  11. 40 CFR 51.354 - Adequate tools and resources.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 2 2014-07-01 2014-07-01 false Adequate tools and resources. 51.354... Requirements § 51.354 Adequate tools and resources. (a) Administrative resources. The program shall maintain the administrative resources necessary to perform all of the program functions including...

  12. 40 CFR 51.354 - Adequate tools and resources.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 2 2013-07-01 2013-07-01 false Adequate tools and resources. 51.354... Requirements § 51.354 Adequate tools and resources. (a) Administrative resources. The program shall maintain the administrative resources necessary to perform all of the program functions including...

  13. [Dynamic behavior of the adaptive control system, hypothalamus--anterior pituitary--adrenal cortex. Animal experimental study of the adequate system dynamics of the direct and indirect parameters of the adaptive control system].

    PubMed

    Zintzsch, I; Seidel, H; Lantzsch, C; Lantzsch, M

    1979-01-01

    The dynamic response of the adaptive closed-loop control system hypothalamus-anterior pituitary-adrenal cortex after application of short-time disturb pulses were examined experimentally in the pig. Blood sampling was performed biologically non-reactive by chronically implanted vascular catheters in the upper vena cava. A circadian biphase periodical dynamics characterizes the distrubance response of the adaptive control system, respectively, its direct and indirect parameters. After distrubance variables induced initial excess the plasma corticosteriods undershoot the basic level over a long period. Conversely, the dynamics of the eosinophils is determined through an initial eosinopenic phase and a subsequent typical overshoot. Periodical dynamic is absent in the steady state. The controller of the adaptive system does not show any spontaneous activity in the steady state without stress. The absence of an endogenic periodicity of the dependent parameters likewise gives evidence of an active oscillator. On the other hand, the controlling unit of the adaptive system constitutes a control response of circadian periodicty after activation by disturbance variables in pulse shape. The high damping of the control system terminates the transient state within 24 hours, and the corticosteriods and the eosinophils reach the steady state level. This control quality of the adaptive control system gains a high importance in the origination of the spontaneous circadian periodicity by corticosteriods and eosinophils and for the biological compensation of exogenous distrubance variables. PMID:233184

  14. 21 CFR 1404.900 - Adequate evidence.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Adequate evidence. 1404.900 Section 1404.900 Food and Drugs OFFICE OF NATIONAL DRUG CONTROL POLICY GOVERNMENTWIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT) Definitions § 1404.900 Adequate evidence. Adequate evidence means information sufficient to support the reasonable belief that a particular...

  15. 29 CFR 98.900 - Adequate evidence.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Adequate evidence. 98.900 Section 98.900 Labor Office of the Secretary of Labor GOVERNMENTWIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT) Definitions § 98.900 Adequate evidence. Adequate evidence means information sufficient to support the reasonable belief that a...

  16. Data management system performance modeling

    NASA Technical Reports Server (NTRS)

    Kiser, Larry M.

    1993-01-01

    This paper discusses analytical techniques that have been used to gain a better understanding of the Space Station Freedom's (SSF's) Data Management System (DMS). The DMS is a complex, distributed, real-time computer system that has been redesigned numerous times. The implications of these redesigns have not been fully analyzed. This paper discusses the advantages and disadvantages for static analytical techniques such as Rate Monotonic Analysis (RMA) and also provides a rationale for dynamic modeling. Factors such as system architecture, processor utilization, bus architecture, queuing, etc. are well suited for analysis with a dynamic model. The significance of performance measures for a real-time system are discussed.

  17. Test techniques for determining laser ranging system performance

    NASA Technical Reports Server (NTRS)

    Zagwodzki, T. W.

    1981-01-01

    Procedures and results of an on going test program intended to evaluate laser ranging system performance levels in the field as well as in the laboratory are summarized. Tests show that laser ranging system design requires consideration of time biases and RMS jitters of individual system components. All simple Q switched lasers tested were found to be inadequate for 10 centimeter ranging systems. Timing discriminators operating over a typical 100:1 dynamic signal range may introduce as much as 7 to 9 centimeters of range bias. Time interval units commercially available today are capable of half centimeter performance and are adequate for all field systems currently deployed. Photomultipliers tested show typical tube time biases of one centimeter with single photoelectron transit time jitter of approximately 10 centimeters. Test results demonstrate that NASA's Mobile Laser Ranging System (MOBLAS) receiver configuration is limiting system performance below the 100 photoelectron level.

  18. High performance aerated lagoon systems

    SciTech Connect

    Rich, L.

    1999-08-01

    At a time when less money is available for wastewater treatment facilities and there is increased competition for the local tax dollar, regulatory agencies are enforcing stricter effluent limits on treatment discharges. A solution for both municipalities and industry is to use aerated lagoon systems designed to meet these limits. This monograph, prepared by a recognized expert in the field, provides methods for the rational design of a wide variety of high-performance aerated lagoon systems. Such systems range from those that can be depended upon to meet secondary treatment standards alone to those that, with the inclusion of intermittent sand filters or elements of sequenced biological reactor (SBR) technology, can also provide for nitrification and nutrient removal. Considerable emphasis is placed on the use of appropriate performance parameters, and an entire chapter is devoted to diagnosing performance failures. Contents include: principles of microbiological processes, control of algae, benthal stabilization, design for CBOD removal, design for nitrification and denitrification in suspended-growth systems, design for nitrification in attached-growth systems, phosphorus removal, diagnosing performance.

  19. Operator Performance Support System (OPSS)

    NASA Technical Reports Server (NTRS)

    Conklin, Marlen Z.

    1993-01-01

    In the complex and fast reaction world of military operations, present technologies, combined with tactical situations, have flooded the operator with assorted information that he is expected to process instantly. As technologies progress, this flow of data and information have both guided and overwhelmed the operator. However, the technologies that have confounded many operators today can be used to assist him -- thus the Operator Performance Support Team. In this paper we propose an operator support station that incorporates the elements of Video and Image Databases, productivity Software, Interactive Computer Based Training, Hypertext/Hypermedia Databases, Expert Programs, and Human Factors Engineering. The Operator Performance Support System will provide the operator with an integrating on-line information/knowledge system that will guide expert or novice to correct systems operations. Although the OPSS is being developed for the Navy, the performance of the workforce in today's competitive industry is of major concern. The concepts presented in this paper which address ASW systems software design issues are also directly applicable to industry. the OPSS will propose practical applications in how to more closely align the relationships between technical knowledge and equipment operator performance.

  20. Performance Confirmation Data Aquisition System

    SciTech Connect

    D.W. Markman

    2000-10-27

    The purpose of this analysis is to identify and analyze concepts for the acquisition of data in support of the Performance Confirmation (PC) program at the potential subsurface nuclear waste repository at Yucca Mountain. The scope and primary objectives of this analysis are to: (1) Review the criteria for design as presented in the Performance Confirmation Data Acquisition/Monitoring System Description Document, by way of the Input Transmittal, Performance Confirmation Input Criteria (CRWMS M&O 1999c). (2) Identify and describe existing and potential new trends in data acquisition system software and hardware that would support the PC plan. The data acquisition software and hardware will support the field instruments and equipment that will be installed for the observation and perimeter drift borehole monitoring, and in-situ monitoring within the emplacement drifts. The exhaust air monitoring requirements will be supported by a data communication network interface with the ventilation monitoring system database. (3) Identify the concepts and features that a data acquisition system should have in order to support the PC process and its activities. (4) Based on PC monitoring needs and available technologies, further develop concepts of a potential data acquisition system network in support of the PC program and the Site Recommendation and License Application.

  1. 34 CFR 85.900 - Adequate evidence.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) Definitions § 85.900 Adequate evidence. Adequate evidence means information sufficient to support the reasonable belief that a particular act or omission has occurred. Authority: E.O. 12549 (3 CFR, 1986 Comp., p. 189); E.O 12689 (3 CFR, 1989 Comp., p. 235); 20 U.S.C. 1082, 1094, 1221e-3 and 3474; and Sec....

  2. 29 CFR 452.110 - Adequate safeguards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 2 2010-07-01 2010-07-01 false Adequate safeguards. 452.110 Section 452.110 Labor... DISCLOSURE ACT OF 1959 Election Procedures; Rights of Members § 452.110 Adequate safeguards. (a) In addition to the election safeguards discussed in this part, the Act contains a general mandate in section...

  3. 29 CFR 452.110 - Adequate safeguards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 2 2011-07-01 2011-07-01 false Adequate safeguards. 452.110 Section 452.110 Labor... DISCLOSURE ACT OF 1959 Election Procedures; Rights of Members § 452.110 Adequate safeguards. (a) In addition to the election safeguards discussed in this part, the Act contains a general mandate in section...

  4. Subsonic Performance of Ejector Systems

    NASA Astrophysics Data System (ADS)

    Weil, Samuel

    Combined cycle engines combining scramjets with turbo jets or rockets can provide efficient hypersonic flight. Ejectors have the potential to increase the thrust and efficiency of combined cycle engines near static conditions. A computer code was developed to support the design of a small-scale, turbine-based combined cycle demonstrator with an ejector, built around a commercially available turbojet engine. This code was used to analyze the performance of an ejector system built around a micro-turbojet. With the use of a simple ejector, net thrust increases as large as 20% over the base engine were predicted. Additionally the specific fuel consumption was lowered by 10%. Increasing the secondary to primary area ratio of the ejector lead to significant improvements in static thrust, specific fuel consumption (SFC), and propulsive efficiency. Further ejector performance improvements can be achieved by using a diffuser. Ejector performance drops off rapidly with increasing Mach number. The ejector has lower thrust and higher SFC than the turbojet core at Mach numbers above 0.2. When the nozzle chokes a significant drop in ejector performance is seen. When a diffuser is used, higher Mach numbers lead to choking in the mixer and a shock in the nozzle causing a significant decrease in ejector performance. Evaluation of different turbo jets shows that ejector performance depends significantly on the properties of the turbojet. Static thrust and SFC improvements can be achieved with increasing ejector area for all engines, but size of increase and change in performance at higher Mach numbers depend heavily on the turbojet. The use of an ejector in a turbine based combined cycle configuration also increases performance at static conditions with a thrust increase of 5% and SFC decrease of 5% for the tested configuration.

  5. Performance Criteria and Evaluation System

    1992-06-18

    The Performance Criteria and Evaluation System (PCES) was developed in order to make a data base of criteria accessible to radiation safety staff. The criteria included in the package are applicable to occupational radiation safety at DOE reactor and nonreactor nuclear facilities, but any data base of criteria may be created using the Criterion Data Base Utiliity (CDU). PCES assists personnel in carrying out oversight, line, and support activities.

  6. High performance solar Stirling system

    NASA Technical Reports Server (NTRS)

    Stearns, J. W.; Haglund, R.

    1981-01-01

    A full-scale Dish-Stirling system experiment, at a power level of 25 kWe, has been tested during 1981 on the Test Bed Concentrator No. 2 at the Parabolic Dish Test Site, Edwards, CA. Test components, designed and developed primarily by industrial contractors for the Department of Energy, include an advanced Stirling engine driving an induction alternator, a directly-coupled solar receiver with a natural gas combustor for hybrid operation and a breadboard control system based on a programmable controller and standard utility substation components. The experiment demonstrated practicality of the solar Stirling application and high system performance into a utility grid. This paper describes the design and its functions, and the test results obtained.

  7. Suomi NPP Ground System Performance

    NASA Astrophysics Data System (ADS)

    Grant, K. D.; Bergeron, C.

    2013-12-01

    The National Oceanic and Atmospheric Administration (NOAA) and National Aeronautics and Space Administration (NASA) are jointly acquiring the next-generation civilian weather and environmental satellite system: the Joint Polar Satellite System (JPSS). JPSS will replace the afternoon orbit component and ground processing system of the current Polar-orbiting Operational Environmental Satellites (POES) managed by NOAA. The JPSS satellites will carry a suite of sensors designed to collect meteorological, oceanographic, climatological and geophysical observations of the Earth. The first satellite in the JPSS constellation, known as the Suomi National Polar-orbiting Partnership (Suomi NPP) satellite, was launched on 28 October 2011, and is currently undergoing product calibration and validation activities. As products reach a beta level of maturity, they are made available to the community through NOAA's Comprehensive Large Array-data Stewardship System (CLASS). CGS's data processing capability processes the satellite data from the Joint Polar Satellite System satellites to provide environmental data products (including Sensor Data Records (SDRs) and Environmental Data Records (EDRs)) to NOAA and Department of Defense (DoD) processing centers operated by the United States government. CGS is currently processing and delivering SDRs and EDRs for Suomi NPP and will continue through the lifetime of the Joint Polar Satellite System programs. Following the launch and sensor activation phase of the Suomi NPP mission, full volume data traffic is now flowing from the satellite through CGS's C3, data processing, and data delivery systems. Ground system performance is critical for this operational system. As part of early system checkout, Raytheon measured all aspects of data acquisition, routing, processing, and delivery to ensure operational performance requirements are met, and will continue to be met throughout the mission. Raytheon developed a tool to measure, categorize, and

  8. Performance Comparison of CGM Systems

    PubMed Central

    Kirchsteiger, Harald; Heinemann, Lutz; Freckmann, Guido; Lodwig, Volker; Schmelzeisen-Redeker, Günther; Schoemaker, Michael; del Re, Luigi

    2015-01-01

    Background: The ongoing progress of continuous glucose monitoring (CGM) systems results in an increasing interest in comparing their performance, in particular in terms of accuracy, that is, matching CGM readings with reference values measured at the same time. Most often accuracy is evaluated by the mean absolute relative difference (MARD). It is frequently overseen that MARD does not only reflect accuracy, but also the study protocol and evaluation procedure, making a cross-study comparison problematic. Methods: We evaluate the effect of several factors on the MARD statistical properties: number of paired reference and CGM values, distribution of the paired values, accuracy of the reference measurement device itself and the time delay between data pairs. All analysis is done using clinical data from 12 patients wearing 6 sensors each. Results: We have found that a few paired points can have a potentially high impact on MARD. Leaving out those points for evaluation thus reduces the MARD. Similarly, accuracy of the reference measurements greatly affects the MARD as numerical and graphical data show. Results also show that a log-normal distribution of the paired references provides a significantly different MARD than, for example, a uniform distribution. Conclusions: MARD is a reasonable parameter to characterize the performance of CGM systems when keeping its limitations in mind. To support clinicians and patients in selecting which CGM system to use in a clinical setting, care should be taken to make MARD more comparable by employing a standardized evaluation procedure. PMID:26330485

  9. Americans Getting Adequate Water Daily, CDC Finds

    MedlinePlus

    ... medlineplus/news/fullstory_158510.html Americans Getting Adequate Water Daily, CDC Finds Men take in an average ... new government report finds most are getting enough water each day. The data, from the U.S. National ...

  10. Americans Getting Adequate Water Daily, CDC Finds

    MedlinePlus

    ... gov/news/fullstory_158510.html Americans Getting Adequate Water Daily, CDC Finds Men take in an average ... new government report finds most are getting enough water each day. The data, from the U.S. National ...

  11. Performance monitor system functional simulator, environmental data, orbiter 101(HFT)

    NASA Technical Reports Server (NTRS)

    Parker, F. W.

    1974-01-01

    Information concerning the environment component of the space shuttle performance monitor system simulator (PMSS) and those subsystems operational on the shuttle orbiter 101 used for horizontal flight test (HFT) is provided, along with detailed data for the shuttle performance monitor system (PMS) whose software requirements evolve from three basic PMS functions: (1) fault detection and annunciation; (2) subsystem measurement management; and (3) subsystem configuration management. Information relative to the design and operation of Orbiter systems for HFT is also presented, and the functional paths are identified to the lowest level at which the crew can control the system functions. Measurement requirements are given which are necessary to adequately monitor the health status of the system. PMS process requirements, relative to the measurements which are necessary for fault detection and annunciation of a failed functional path, consist of measurement characteristics, tolerance limits, precondition tests, and correlation measurements.

  12. AMiBA: System Performance

    NASA Astrophysics Data System (ADS)

    Lin, Kai-Yang; Li, Chao-Te; Ho, Paul T. P.; Huang, Chih-Wei Locutus; Liao, Yu-Wei; Liu, Guo-Chin; Koch, Patrick M.; Molnar, Sandor M.; Nishioka, Hiroaki; Umetsu, Keiichi; Wang, Fu-Cheng; Wu, Jiun-Huei Proty; Kestevan, Michael; Birkinshaw, Mark; Altamirano, Pablo; Chang, Chia-Hao; Chang, Shu-Hao; Chang, Su-Wei; Chen, Ming-Tang; Martin-Cocher, Pierre; Han, Chih-Chiang; Huang, Yau-De; Hwang, Yuh-Jing; Ibañez-Roman, Fabiola; Jiang, Homin; Kubo, Derek Y.; Oshiro, Peter; Raffin, Philippe; Wei, Tashun; Wilson, Warwick; Chen, Ke-Jung; Chiueh, Tzihong

    2009-04-01

    The Y.T. Lee Array for Microwave Background Anisotropy started scientific operation in early 2007. This work describes the optimization of the system performance for the measurements of the Sunyaev-Zel'dovich effect for six massive galaxy clusters at redshifts 0.09-0.32. We achieved a point-source sensitivity of 63 ± 7 mJy with the seven 0.6 m dishes in 1 hr of on-source integration in two-patch differencing observations. We measured and compensated for the delays between the antennas of our platform-mounted interferometer. Beam switching was used to cancel instrumental instabilities and ground pick up. Total power and phase stability were good on timescales of hours, and the system was shown to integrate down on equivalent timescales of 300 hr per baseline/correlation, or about 10 hr for the entire array. While the broadband correlator leads to good sensitivity, the small number of lags in the correlator resulted in poorly measured bandpass response. We corrected for this by using external calibrators (Jupiter and Saturn). Using Jupiter as the flux standard, we measured the disk brightness temperature of Saturn to be 149+5 -12 K.

  13. Asbestos/NESHAP adequately wet guidance

    SciTech Connect

    Shafer, R.; Throwe, S.; Salgado, O.; Garlow, C.; Hoerath, E.

    1990-12-01

    The Asbestos NESHAP requires facility owners and/or operators involved in demolition and renovation activities to control emissions of particulate asbestos to the outside air because no safe concentration of airborne asbestos has ever been established. The primary method used to control asbestos emissions is to adequately wet the Asbestos Containing Material (ACM) with a wetting agent prior to, during and after demolition/renovation activities. The purpose of the document is to provide guidance to asbestos inspectors and the regulated community on how to determine if friable ACM is adequately wet as required by the Asbestos NESHAP.

  14. Honeywell Cascade Distiller System Performance Testing Interim Results

    NASA Technical Reports Server (NTRS)

    Callahan, Michael R.; Sargusingh, Miriam

    2014-01-01

    The ability to recover and purify water through physiochemical processes is crucial for realizing long-term human space missions, including both planetary habitation and space travel. Because of their robust nature, distillation systems have been actively pursued as one of the technologies for water recovery. The Cascade Distillation System (CDS) is a vacuum rotary distillation system with potential for greater reliability and lower energy costs than existing distillation systems. The CDS was previously under development through Honeywell and NASA. In 2009, an assessment was performed to collect data to support down-selection and development of a primary distillation technology for application in a lunar outpost water recovery system. Based on the results of this testing, an expert panel concluded that the CDS showed adequate development maturity, TRL-4, together with the best product water quality and competitive weight and power estimates to warrant further development. The Advanced Exploration Systems (AES) Water Recovery Project (WRP) worked to address weaknesses identified by The Panel; namely bearing design and heat pump power efficiency. Testing at the NASA-JSC Advanced Exploration System Water Laboratory (AES Water Lab) using a prototype Cascade Distillation Subsystem (CDS) wastewater processor (Honeywell International, Torrance, Calif.) with test support equipment and control system developed by Johnson Space Center was performed to evaluate performance of the system with the upgrades. The CDS will also have been challenged with ISS analog waste streams and a subset of those being considered for Exploration architectures. This paper details interim results of the AES WRP CDS performance testing.

  15. Adequate supervision for children and adolescents.

    PubMed

    Anderst, James; Moffatt, Mary

    2014-11-01

    Primary care providers (PCPs) have the opportunity to improve child health and well-being by addressing supervision issues before an injury or exposure has occurred and/or after an injury or exposure has occurred. Appropriate anticipatory guidance on supervision at well-child visits can improve supervision of children, and may prevent future harm. Adequate supervision varies based on the child's development and maturity, and the risks in the child's environment. Consideration should be given to issues as wide ranging as swimming pools, falls, dating violence, and social media. By considering the likelihood of harm and the severity of the potential harm, caregivers may provide adequate supervision by minimizing risks to the child while still allowing the child to take "small" risks as needed for healthy development. Caregivers should initially focus on direct (visual, auditory, and proximity) supervision of the young child. Gradually, supervision needs to be adjusted as the child develops, emphasizing a safe environment and safe social interactions, with graduated independence. PCPs may foster adequate supervision by providing concrete guidance to caregivers. In addition to preventing injury, supervision includes fostering a safe, stable, and nurturing relationship with every child. PCPs should be familiar with age/developmentally based supervision risks, adequate supervision based on those risks, characteristics of neglectful supervision based on age/development, and ways to encourage appropriate supervision throughout childhood. PMID:25369578

  16. Small Rural Schools CAN Have Adequate Curriculums.

    ERIC Educational Resources Information Center

    Loustaunau, Martha

    The small rural school's foremost and largest problem is providing an adequate curriculum for students in a changing world. Often the small district cannot or is not willing to pay the per-pupil cost of curriculum specialists, specialized courses using expensive equipment no more than one period a day, and remodeled rooms to accommodate new…

  17. Funding the Formula Adequately in Oklahoma

    ERIC Educational Resources Information Center

    Hancock, Kenneth

    2015-01-01

    This report is a longevity, simulational study that looks at how the ratio of state support to local support effects the number of school districts that breaks the common school's funding formula which in turns effects the equity of distribution to the common schools. After nearly two decades of adequately supporting the funding formula, Oklahoma…

  18. Comparability and Reliability Considerations of Adequate Yearly Progress

    ERIC Educational Resources Information Center

    Maier, Kimberly S.; Maiti, Tapabrata; Dass, Sarat C.; Lim, Chae Young

    2012-01-01

    The purpose of this study is to develop an estimate of Adequate Yearly Progress (AYP) that will allow for reliable and valid comparisons among student subgroups, schools, and districts. A shrinkage-type estimator of AYP using the Bayesian framework is described. Using simulated data, the performance of the Bayes estimator will be compared to…

  19. Performance confirmation data acquisition system

    SciTech Connect

    McAffee, D.A.; Raczka, N.T.

    1997-12-31

    As part of the Viability Assessment (VA) work, this QAP-3-9 document presents and evaluates a comprehensive set of viable concepts for collecting Performance Confirmation (PC) related data. The concepts include: monitoring subsurface repository air temperatures, humidity levels and gaseous emissions via the subsurface ventilation systems, and monitoring the repository geo-technical parameters and rock mass from bore-holes located along the perimeter main drifts and throughout a series of human-rated Observation Drifts to be located in a plane 25 meters above the plane of the emplacement drifts. A key element of this document is the development and analysis of a purposed multi-purpose Remote Inspection Gantry that would provide direct, real-time visual, thermal, and radiological monitoring of conditions inside operational emplacement drifts and close-up observations of in-situ Waste Packages. Preliminary finite-element analyses are presented that indicate the technological feasibility of operating an inspection gantry inside the operational emplacement drifts for short inspection missions lasting 2--3 hours. Overall reliability, availability, and maintainability of the PC data collection concepts are discussed. Preliminary concepts for PC data collection network are also provided.

  20. ACCESS Sub-system Performance

    NASA Astrophysics Data System (ADS)

    Kaiser, Mary Elizabeth; Morris, Matthew J.; Aldoroty, Lauren Nicole; Godon, David; Pelton, Russell; McCandliss, Stephan R.; Kurucz, Robert L.; Kruk, Jeffrey W.; Rauscher, Bernard J.; Kimble, Randy A.; Wright, Edward L.; Benford, Dominic J.; Gardner, Jonathan P.; Feldman, Paul D.; Moos, H. Warren; Riess, Adam G.; Bohlin, Ralph; Deustua, Susana E.; Dixon, William Van Dyke; Sahnow, David J.; Lampton, Michael; Perlmutter, Saul

    2016-01-01

    ACCESS: Absolute Color Calibration Experiment for Standard Stars is a series of rocket-borne sub-orbital missions and ground-based experiments designed to leverage significant technological advances in detectors, instruments, and the precision of the fundamental laboratory standards used to calibrate these instruments to enable improvements in the precision of the astrophysical flux scale through the transfer of laboratory absolute detector standards from the National Institute of Standards and Technology (NIST) to a network of stellar standards with a calibration accuracy of 1% and a spectral resolving power of 500 across the 0.35 to 1.7 micron bandpass.A cross wavelength calibration of the astrophysical flux scale to this level of precision over this broad a bandpass is relevant for the data used to probe fundamental astrophysical problems such as the SNeIa photometry based measurements used to constrain dark energy theories.We will describe the strategy for achieving this level of precision, the payload and calibration configuration, present sub-system test data, and the status and preliminary performance of the integration and test of the spectrograph and telescope. NASA APRA sounding rocket grant NNX14AH48G supports this work.

  1. Statistical assessment of speech system performance

    NASA Technical Reports Server (NTRS)

    Moshier, Stephen L.

    1977-01-01

    Methods for the normalization of performance tests results of speech recognition systems are presented. Technological accomplishments in speech recognition systems, as well as planned research activities are described.

  2. Improving File System Performance by Striping

    NASA Technical Reports Server (NTRS)

    Lam, Terance L.; Kutler, Paul (Technical Monitor)

    1998-01-01

    This document discusses the performance and advantages of striped file systems on the SGI AD workstations. Performance of several striped file system configurations are compared and guidelines for optimal striping are recommended.

  3. Performance of code division multiple access systems

    NASA Technical Reports Server (NTRS)

    Weber, C. L.; Huth, G. K.; Batson, B. H.

    1980-01-01

    The performance of code division multiple-access (CDMA) systems is determined using direct sequence spectral spreading. Under relatively ideal conditions, the degradation in system performance as a function of the number of users is shown to have a threshold effect. This basic limitation in the number of users of the system is further limited if the powers are unequal. For two users, system performance as a function of their power ratio also has a threshold effect. System performance as a function of the amount of spectral spreading is determined. The performance of both coded and uncoded systems is predicted.

  4. Performance related issues in distributed database systems

    NASA Technical Reports Server (NTRS)

    Mukkamala, Ravi

    1991-01-01

    The key elements of research performed during the year long effort of this project are: Investigate the effects of heterogeneity in distributed real time systems; Study the requirements to TRAC towards building a heterogeneous database system; Study the effects of performance modeling on distributed database performance; and Experiment with an ORACLE based heterogeneous system.

  5. Performance evaluation of ground based radar systems

    NASA Astrophysics Data System (ADS)

    Grant, Stanley E.

    1994-06-01

    Ground based radar systems are a critical resource to the command, control, and communications system. This thesis provides the tools and methods to better understand the actual performance of an operational ground based radar system. This thesis defines two measurable performance standards: (1) the baseline performance, which is based on the sensor's internal characteristics, and (2) the theoretical performance, which considers not only the sensor's internal characteristics, but also the effects of the surrounding terrain and atmosphere on the sensor's performance. The baseline radar system performance, often used by operators, contractors, and radar modeling software to determine the expected system performance, is a simplistic and unrealistic means to predict actual radar system performance. The theoretical radar system performance is more complex; but, the results are much more indicative of the actual performance of an operational radar system. The AN/UPS-1 at the Naval Postgraduate School was used as the system under test to illustrate the baseline and theoretical radar system performance. The terrain effects are shown by performing a multipath study and producing coverage diagrams. The key variables used to construct the multipath study and coverage diagrams are discussed in detail. The atmospheric effects are illustrated by using the Integrated Refractive Effects Prediction System (IREPS) and the Engineer's Refractive Effects Prediction System (EREPS) software tools to produce propagations conditions summaries and coverage displays.

  6. 21 CFR 514.117 - Adequate and well-controlled studies.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... production performance, or biased observation. One or more adequate and well-controlled studies are required... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Adequate and well-controlled studies. 514.117... Applications § 514.117 Adequate and well-controlled studies. (a) Purpose. The primary purpose of...

  7. 21 CFR 514.117 - Adequate and well-controlled studies.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... production performance, or biased observation. One or more adequate and well-controlled studies are required... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Adequate and well-controlled studies. 514.117... Applications § 514.117 Adequate and well-controlled studies. (a) Purpose. The primary purpose of...

  8. 21 CFR 514.117 - Adequate and well-controlled studies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... production performance, or biased observation. One or more adequate and well-controlled studies are required... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Adequate and well-controlled studies. 514.117... Applications § 514.117 Adequate and well-controlled studies. (a) Purpose. The primary purpose of...

  9. 21 CFR 514.117 - Adequate and well-controlled studies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... production performance, or biased observation. One or more adequate and well-controlled studies are required... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Adequate and well-controlled studies. 514.117... Applications § 514.117 Adequate and well-controlled studies. (a) Purpose. The primary purpose of...

  10. 21 CFR 514.117 - Adequate and well-controlled studies.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... production performance, or biased observation. One or more adequate and well-controlled studies are required... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Adequate and well-controlled studies. 514.117... Applications § 514.117 Adequate and well-controlled studies. (a) Purpose. The primary purpose of...

  11. Shared performance monitor in a multiprocessor system

    DOEpatents

    Chiu, George; Gara, Alan G; Salapura, Valentina

    2014-12-02

    A performance monitoring unit (PMU) and method for monitoring performance of events occurring in a multiprocessor system. The multiprocessor system comprises a plurality of processor devices units, each processor device for generating signals representing occurrences of events in the processor device, and, a single shared counter resource for performance monitoring. The performance monitor unit is shared by all processor cores in the multiprocessor system. The PMU is further programmed to monitor event signals issued from non-processor devices.

  12. Mass Storage Performance Information System

    NASA Technical Reports Server (NTRS)

    Scheuermann, Peter

    2000-01-01

    The purpose of this task is to develop a data warehouse to enable system administrators and their managers to gather information by querying the data logs of the MDSDS. Currently detailed logs capture the activity of the MDSDS internal to the different systems. The elements to be included in the data warehouse are requirements analysis, data cleansing, database design, database population, hardware/software acquisition, data transformation, query and report generation, and data mining.

  13. Telerobotic system performance measurement - Motivation and methods

    NASA Technical Reports Server (NTRS)

    Kondraske, George V.; Khoury, George J.

    1992-01-01

    A systems performance-based strategy for modeling and conducting experiments relevant to the design and performance characterization of telerobotic systems is described. A developmental testbed consisting of a distributed telerobotics network and initial efforts to implement the strategy described is presented. Consideration is given to the general systems performance theory (GSPT) to tackle human performance problems as a basis for: measurement of overall telerobotic system (TRS) performance; task decomposition; development of a generic TRS model; and the characterization of performance of subsystems comprising the generic model. GSPT employs a resource construct to model performance and resource economic principles to govern the interface of systems to tasks. It provides a comprehensive modeling/measurement strategy applicable to complex systems including both human and artificial components. Application is presented within the framework of a distributed telerobotics network as a testbed. Insight into the design of test protocols which elicit application-independent data is described.

  14. Performance Of Perfluoropolyalkylether Lubricant System

    NASA Technical Reports Server (NTRS)

    Paciorek, K.; Masuda, S.; Lin, Wen-Huey; Bierschenk, T.; Kawa, H.; Juhlke, T.; Lagow, R.

    1995-01-01

    Perfluoro-polyalkylethers (PFPAE) constitute class of fluids having characteristics of high thermal oxidative stability, good vicosity-temperature characteristics, good elastohydrodynamic film-forming capabilities, low volatility, and non-flammability. One unfortunate drawback PFPAE causes severe metal corrosion and fluid degradation when used in oxidizing atmosphere. Reports of interest deal with synthesis of PFPAE-type liquids and development of additive to reduce oxidizing atmosphere degradation. Properties and molecular structures reported in detail. Also lubricant performance over range of conditions.

  15. MPD arcjet system performance test

    NASA Astrophysics Data System (ADS)

    Kuriki, Kyoichi; Shimizu, Yukio; Morimoto, Shinji; Kuwahara, Keiichi; Kisaragi, Takayasu; Uematsu, Kazuo; Enya, Shintaro; Sasao, Yoshio

    A new MPD (magnetoplasmadynamic) arcjet system was developed and tested to demonstrate its technological readiness for flight model design. The MPD arcjet, of quasisteady type, was repetitively operated. In the endurance test, more than 10 5 shots were cleared in continuous operation. Some components cleared more than 10 6 shots. Cathode erosion was markedly reduced through the use of newly developed material. Thermal data were obtained which define the thermal interface between the spacecraft and the MPD arcjet system. Waste heat from the electrodes was found to be 20-30% of the input power and to vary with repetition frequency. No technological difficulties are foreseen for further continuation of repetitive operation.

  16. Measured performance of the GTA rf systems

    SciTech Connect

    Denney, P.M.; Jachim, S.P.

    1993-06-01

    This paper describes the performance of the RF systems on the Ground Test Accelerator (GTA). The RF system architecture is briefly described. Among the RF performance results presented are RF field flatness and stability, amplitude and phase control resolution, and control system bandwidth and stability. The rejection by the RF systems of beam-induced disturbances, such as transients and noise, are analyzed. The observed responses are also compared to computer-based simulations of the RF systems for validation.

  17. Measured performance of the GTA rf systems

    SciTech Connect

    Denney, P.M.; Jachim, S.P.

    1993-01-01

    This paper describes the performance of the RF systems on the Ground Test Accelerator (GTA). The RF system architecture is briefly described. Among the RF performance results presented are RF field flatness and stability, amplitude and phase control resolution, and control system bandwidth and stability. The rejection by the RF systems of beam-induced disturbances, such as transients and noise, are analyzed. The observed responses are also compared to computer-based simulations of the RF systems for validation.

  18. Evaluating Performances of Solar-Energy Systems

    NASA Technical Reports Server (NTRS)

    Jaffe, L. D.

    1987-01-01

    CONC11 computer program calculates performances of dish-type solar thermal collectors and power systems. Solar thermal power system consists of one or more collectors, power-conversion subsystems, and powerprocessing subsystems. CONC11 intended to aid system designer in comparing performance of various design alternatives. Written in Athena FORTRAN and Assembler.

  19. INTEGRATED WATER TREATMENT SYSTEM PERFORMANCE EVALUATION

    SciTech Connect

    SEXTON RA; MEEUWSEN WE

    2009-03-12

    This document describes the results of an evaluation of the current Integrated Water Treatment System (IWTS) operation against design performance and a determination of short term and long term actions recommended to sustain IWTS performance.

  20. Standardization in Cryogenic Insulation Systems Testing and Performance Data

    NASA Astrophysics Data System (ADS)

    Fesmire, James E.

    The close relationship between industrial energy use and cryogenics drives the need for optimized thermal insulation systems. Emerging cryofuels usage is enabled by adequate isolation of the liquid hydrogen or liquefied natural gas from the ambient environment. Thermal performance data for the total insulation system, as rendered, are essential for both engineering designs and cost-benefit decisions involving comparisons among alternatives. These data are obtained through rigorous testing with suitable apparatus and repeatable methods. Properly defined terminology, analysis, and reporting are also vital. Advances in cryogenic insulation test apparatus and methods have led to the recent addition of two new technical standards of ASTM International: C1774 - Standard Guide for Thermal Performance Testing of Cryogenic InsulationSystems and C740 - Standard Guide for Evacuated Reflective Cryogenic Insulation. Among the different techniques described in the new standards is the cylindrical boiloff calorimeter for absolute heat measurement over the full range of vacuum pressure conditions. The details of this apparatus, test method, and data analysis are given. Benchmark thermal performance data, including effective thermal conductivity (ke) and heat flux (q) for the boundary temperatures of 293 K and 77 K, are given for a number of different multilayer insulation (MLI) systems in comparison with data for other commonly-used insulation systems including perlite powder, fiberglass, polyurethane foam, and aerogels.

  1. Spacecraft Multiple Array Communication System Performance Analysis

    NASA Technical Reports Server (NTRS)

    Hwu, Shian U.; Desilva, Kanishka; Sham, Catherine C.

    2010-01-01

    The Communication Systems Simulation Laboratory (CSSL) at the NASA Johnson Space Center is tasked to perform spacecraft and ground network communication system simulations, design validation, and performance verification. The CSSL has developed simulation tools that model spacecraft communication systems and the space and ground environment in which the tools operate. In this paper, a spacecraft communication system with multiple arrays is simulated. Multiple array combined technique is used to increase the radio frequency coverage and data rate performance. The technique is to achieve phase coherence among the phased arrays to combine the signals at the targeting receiver constructively. There are many technical challenges in spacecraft integration with a high transmit power communication system. The array combining technique can improve the communication system data rate and coverage performances without increasing the system transmit power requirements. Example simulation results indicate significant performance improvement can be achieved with phase coherence implementation.

  2. Cascade Distiller System Performance Testing Interim Results

    NASA Technical Reports Server (NTRS)

    Callahan, Michael R.; Pensinger, Stuart; Sargusingh, Miriam J.

    2014-01-01

    The Cascade Distillation System (CDS) is a rotary distillation system with potential for greater reliability and lower energy costs than existing distillation systems. Based upon the results of the 2009 distillation comparison test (DCT) and recommendations of the expert panel, the Advanced Exploration Systems (AES) Water Recovery Project (WRP) project advanced the technology by increasing reliability of the system through redesign of bearing assemblies and improved rotor dynamics. In addition, the project improved the CDS power efficiency by optimizing the thermoelectric heat pump (TeHP) and heat exchanger design. Testing at the NASA-JSC Advanced Exploration System Water Laboratory (AES Water Lab) using a prototype Cascade Distillation Subsystem (CDS) wastewater processor (Honeywell d International, Torrance, Calif.) with test support equipment and control system developed by Johnson Space Center was performed to evaluate performance of the system with the upgrades as compared to previous system performance. The system was challenged with Solution 1 from the NASA Exploration Life Support (ELS) distillation comparison testing performed in 2009. Solution 1 consisted of a mixed stream containing human-generated urine and humidity condensate. A secondary objective of this testing is to evaluate the performance of the CDS as compared to the state of the art Distillation Assembly (DA) used in the ISS Urine Processor Assembly (UPA). This was done by challenging the system with ISS analog waste streams. This paper details the results of the AES WRP CDS performance testing.

  3. RHIC sextant test: Accelerator systems and performance

    SciTech Connect

    Pilat, F.; Trbojevic, D.; Ahrens, L.

    1997-08-01

    One sextant of the RHIC Collider was commissioned in early 1997 with beam. We describe here the performance of the accelerator systems, instrumentation subsystems and application software. We also describe a ramping test without beam that took place after the commissioning with beam. Finally, we analyze the implications of accelerator systems performance and their impact on the planning for RHIC installation and commissioning.

  4. Cost and Performance Model for Photovoltaic Systems

    NASA Technical Reports Server (NTRS)

    Borden, C. S.; Smith, J. H.; Davisson, M. C.; Reiter, L. J.

    1986-01-01

    Lifetime cost and performance (LCP) model assists in assessment of design options for photovoltaic systems. LCP is simulation of performance, cost, and revenue streams associated with photovoltaic power systems connected to electric-utility grid. LCP provides user with substantial flexibility in specifying technical and economic environment of application.

  5. Cost and Performance of Distributed Photovoltaic Systems

    NASA Technical Reports Server (NTRS)

    Borden, C. S.; Davisson, M. C.

    1985-01-01

    Lifetime Cost and Performance (LCP) model assists in design of Photovoltaic (PV) systems. LCP simulation of performance, cost and revenue streams associated with distributed PV power systems. Provides user with substantial flexibility in specifying technical and economic environment of PV application.

  6. Performance evaluation of video colonoscope systems

    NASA Astrophysics Data System (ADS)

    Picciano, Lawrence D.; Keller, James P.

    1994-05-01

    A comparative engineering performance evaluation was performed on video colonoscope systems from all three of the current U.S. suppliers: Fujinon, Olympus, and Pentax. Video system test methods, results, and conclusions based on their clinical significance are the focus of this paper.

  7. Beyond Instructional Systems: A Performance Technology Degree.

    ERIC Educational Resources Information Center

    Ruckdeschel, Clare; Yarter, Michael; Riveccio, Mary Ann; Cortes, Ivan; Cookson, Mark S.

    1998-01-01

    Provides an overview of performance technology, the application of knowledge for optimizing performance. Discusses the influence of ISD (instructional systems design), tactical interventions, business, and industry; its use in business, industry, military, and government; and academic backgrounds of performance designers. Outlines a…

  8. Business School's Performance Management System Standards Design

    ERIC Educational Resources Information Center

    Azis, Anton Mulyono; Simatupang, Togar M.; Wibisono, Dermawan; Basri, Mursyid Hasan

    2014-01-01

    This paper aims to compare various Performance Management Systems (PMS) for business school in order to find the strengths of each standard as inputs to design new model of PMS. There are many critical aspects and gaps notified for new model to improve performance and even recognized that self evaluation performance management is not well…

  9. Is a vegetarian diet adequate for children.

    PubMed

    Hackett, A; Nathan, I; Burgess, L

    1998-01-01

    The number of people who avoid eating meat is growing, especially among young people. Benefits to health from a vegetarian diet have been reported in adults but it is not clear to what extent these benefits are due to diet or to other aspects of lifestyles. In children concern has been expressed concerning the adequacy of vegetarian diets especially with regard to growth. The risks/benefits seem to be related to the degree of restriction of he diet; anaemia is probably both the main and the most serious risk but this also applies to omnivores. Vegan diets are more likely to be associated with malnutrition, especially if the diets are the result of authoritarian dogma. Overall, lacto-ovo-vegetarian children consume diets closer to recommendations than omnivores and their pre-pubertal growth is at least as good. The simplest strategy when becoming vegetarian may involve reliance on vegetarian convenience foods which are not necessarily superior in nutritional composition. The vegetarian sector of the food industry could do more to produce foods closer to recommendations. Vegetarian diets can be, but are not necessarily, adequate for children, providing vigilance is maintained, particularly to ensure variety. Identical comments apply to omnivorous diets. Three threats to the diet of children are too much reliance on convenience foods, lack of variety and lack of exercise. PMID:9670174

  10. Desiccant cooling system performance: A simple approach

    NASA Astrophysics Data System (ADS)

    Epstein, M.; Grolmes, M. A.

    1982-10-01

    The wave nature of heat and mass transfer in fixed desiccant bed adsorption is explained. A simple algebraic model of wave motion under single low desiccant bed operation is developed and applied to the prediction of the performance potential of the overall desiccant cooling system. The model is used to explain the increase in cooling system performance that is realized through the use of mixed inert desiccant material adsorption beds. The response of cooling system performance to changes in external process conditions is examined and conclusions are drawn relative to optimization of system characteristics.

  11. Performance measurement for information systems: Industry perspectives

    NASA Technical Reports Server (NTRS)

    Bishop, Peter C.; Yoes, Cissy; Hamilton, Kay

    1992-01-01

    Performance measurement has become a focal topic for information systems (IS) organizations. Historically, IS performance measures have dealt with the efficiency of the data processing function. Today, the function of most IS organizations goes beyond simple data processing. To understand how IS organizations have developed meaningful performance measures that reflect their objectives and activities, industry perspectives on IS performance measurement was studied. The objectives of the study were to understand the state of the practice in IS performance techniques for IS performance measurement; to gather approaches and measures of actual performance measures used in industry; and to report patterns, trends, and lessons learned about performance measurement to NASA/JSC. Examples of how some of the most forward looking companies are shaping their IS processes through measurement is provided. Thoughts on the presence of a life-cycle to performance measures development and a suggested taxonomy for performance measurements are included in the appendices.

  12. Performance Evaluation of a Data Validation System

    NASA Technical Reports Server (NTRS)

    Wong, Edmond (Technical Monitor); Sowers, T. Shane; Santi, L. Michael; Bickford, Randall L.

    2005-01-01

    Online data validation is a performance-enhancing component of modern control and health management systems. It is essential that performance of the data validation system be verified prior to its use in a control and health management system. A new Data Qualification and Validation (DQV) Test-bed application was developed to provide a systematic test environment for this performance verification. The DQV Test-bed was used to evaluate a model-based data validation package known as the Data Quality Validation Studio (DQVS). DQVS was employed as the primary data validation component of a rocket engine health management (EHM) system developed under NASA's NGLT (Next Generation Launch Technology) program. In this paper, the DQVS and DQV Test-bed software applications are described, and the DQV Test-bed verification procedure for this EHM system application is presented. Test-bed results are summarized and implications for EHM system performance improvements are discussed.

  13. Management system, organizational climate and performance relationships

    NASA Technical Reports Server (NTRS)

    Davis, B. D.

    1979-01-01

    Seven aerospace firms were investigated to determine if a relationship existed among management systems, organizational climate, and organization performance. Positive relationships were found between each of these variables, but a statistically significant relationship existed only between the management system and organizational climate. The direction and amount of communication and the degree of decentralized decision-making, elements of the management system, also had a statistically significant realtionship with organization performance.

  14. Long term performance of radon mitigation systems

    SciTech Connect

    Prill, R.; Fisk, W.J.

    2002-03-01

    Researchers installed radon mitigation systems in 12 houses in Spokane, Washington and Coeur d'Alene, Idaho during the heating season 1985--1986 and continued to monitor indoor radon quarterly and annually for ten years. The mitigation systems included active sub-slab ventilation, basement over-pressurization, and crawlspace isolation and ventilation. The occupants reported various operational problems with these early mitigation systems. The long-term radon measurements were essential to track the effectiveness of the mitigation systems over time. All 12 homes were visited during the second year of the study, while a second set 5 homes was visited during the fifth year to determine the cause(s) of increased radon in the homes. During these visits, the mitigation systems were inspected and measurements of system performance were made. Maintenance and modifications were performed to improve system performance in these homes.

  15. X-31 high angle of attack control system performance

    NASA Technical Reports Server (NTRS)

    Huber, Peter; Seamount, Patricia

    1994-01-01

    The design goals for the X-31 flight control system were: (1) level 1 handling qualities during post-stall maneuvering (30 to 70 degrees angle-of-attack); (2) thrust vectoring to enhance performance across the flight envelope; and (3) adequate pitch-down authority at high angle-of-attack. Additional performance goals are discussed. A description of the flight control system is presented, highlighting flight control system features in the pitch and roll axes and X-31 thrust vectoring characteristics. The high angle-of-attack envelope clearance approach will be described, including a brief explanation of analysis techniques and tools. Also, problems encountered during envelope expansion will be discussed. This presentation emphasizes control system solutions to problems encountered in envelope expansion. An essentially 'care free' envelope was cleared for the close-in-combat demonstrator phase. High angle-of-attack flying qualities maneuvers are currently being flown and evaluated. These results are compared with pilot opinions expressed during the close-in-combat program and with results obtained from the F-18 HARV for identical maneuvers. The status and preliminary results of these tests are discussed.

  16. Performance of image intensifiers in radiographic systems

    SciTech Connect

    Baker, S.A.

    2000-01-01

    Electronic charge-coupled device (CCD) cameras equipped with image intensifiers are increasingly being used for radiographic applications. These systems may be used to replace film recording for static imaging, or at other times CCDs coupled with electro-optical shutters may be used for static or dynamic (explosive) radiography. Image intensifiers provide precise shuttering and signal gain. The authors have developed a set of performance measures to calibrate systems, compare one system to another, and to predict experimental performance. The performance measures discussed in this paper are concerned with image quality parameters that relate to resolution and signal-to-noise ratio.

  17. Performance Monitoring of Distributed Data Processing Systems

    NASA Technical Reports Server (NTRS)

    Ojha, Anand K.

    2000-01-01

    Test and checkout systems are essential components in ensuring safety and reliability of aircraft and related systems for space missions. A variety of systems, developed over several years, are in use at the NASA/KSC. Many of these systems are configured as distributed data processing systems with the functionality spread over several multiprocessor nodes interconnected through networks. To be cost-effective, a system should take the least amount of resource and perform a given testing task in the least amount of time. There are two aspects of performance evaluation: monitoring and benchmarking. While monitoring is valuable to system administrators in operating and maintaining, benchmarking is important in designing and upgrading computer-based systems. These two aspects of performance evaluation are the foci of this project. This paper first discusses various issues related to software, hardware, and hybrid performance monitoring as applicable to distributed systems, and specifically to the TCMS (Test Control and Monitoring System). Next, a comparison of several probing instructions are made to show that the hybrid monitoring technique developed by the NIST (National Institutes for Standards and Technology) is the least intrusive and takes only one-fourth of the time taken by software monitoring probes. In the rest of the paper, issues related to benchmarking a distributed system have been discussed and finally a prescription for developing a micro-benchmark for the TCMS has been provided.

  18. 29 CFR 505.5 - Adequate assurances.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... amount of a weekly or monthly salary, talent or performance fee, hourly rate or other basis on which... requirements in paragraph (b) were approved by the Office of Management and Budget under control number...

  19. 29 CFR 505.5 - Adequate assurances.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... amount of a weekly or monthly salary, talent or performance fee, hourly rate or other basis on which... requirements in paragraph (b) were approved by the Office of Management and Budget under control number...

  20. Airplane takeoff and landing performance monitoring system

    NASA Technical Reports Server (NTRS)

    Middleton, David B. (Inventor); Srivatsan, Raghavachari (Inventor); Person, Jr., Lee H. (Inventor)

    1996-01-01

    The invention is a real-time takeoff and landing performance monitoring system for an aircraft which provides a pilot with graphic and metric information to assist in decisions related to achieving rotation speed (V.sub.R) within the safe zone of a runway, or stopping the aircraft on the runway after landing or take-off abort. The system processes information in two segments: a pretakeoff segment and a real-time segment. One-time inputs of ambient conditions and airplane configuration information are used in the pretakeoff segment to generate scheduled performance data. The real-time segment uses the scheduled performance data, runway length data and transducer measured parameters to monitor the performance of the airplane throughout the takeoff roll. Airplane acceleration and engine-performance anomalies are detected and annunciated. A novel and important feature of this segment is that it updates the estimated runway rolling friction coefficient. Airplane performance predictions also reflect changes in head wind occurring as the takeoff roll progresses. The system provides a head-down display and a head-up display. The head-up display is projected onto a partially reflective transparent surface through which the pilot views the runway. By comparing the present performance of the airplane with a continually predicted nominal performance based upon given conditions, performance deficiencies are detected by the system and conveyed to pilot in form of both elemental information and integrated information.

  1. Airplane takeoff and landing performance monitoring system

    NASA Technical Reports Server (NTRS)

    Middleton, David B. (Inventor); Srivatsan, Raghavachari (Inventor); Person, Lee H., Jr. (Inventor)

    1994-01-01

    The invention is a real-time takeoff and landing performance monitoring system for an aircraft which provides a pilot with graphic and metric information to assist in decisions related to achieving rotation speed (VR) within the safe zone of a runway, or stopping the aircraft on the runway after landing or take-off abort. The system processes information in two segments: a pretakeoff segment and a real-time segment. One-time inputs of ambient conditions and airplane configuration information are used in the pretakeoff segment to generate scheduled performance data. The real-time segment uses the scheduled performance data, runway length data and transducer measured parameters to monitor the performance of the airplane throughout the takeoff roll. Airplane acceleration and engine-performance anomalies are detected and annunciated. A novel and important feature of this segment is that it updates the estimated runway rolling friction coefficient. Airplane performance predictions also reflect changes in head wind occurring as the takeoff roll progresses. The system provides a head-down display and a head-up display. The head-up display is projected onto a partially reflective transparent surface through which the pilot views the runway. By comparing the present performance of the airplane with a continually predicted nominal performance based upon given conditions, performance deficiencies are detected by the system and conveyed to pilot in form of both elemental information and integrated information.

  2. Airplane takeoff and landing performance monitoring system

    NASA Technical Reports Server (NTRS)

    Middleton, David B. (Inventor); Srivatsan, Raghavachari (Inventor); Person, Jr., Lee H. (Inventor)

    1991-01-01

    The invention is a real-time takeoff and landing performance monitoring system for an aircraft which provides a pilot with graphic and metric information to assist in decisions related to achieving rotation speed (V.sub.R) within the safe zone of a runway, or stopping the aircraft on the runway after landing or take-off abort. The system processes information in two segments: a pretakeoff segment and a real-time segment. One-time inputs of ambient conditions and airplane configuration information are used in the pretakeoff segment to generate scheduled performance data. The real-time segment uses the scheduled performance data, runway length data and transducer measured parameters to monitor the performance of the airplane throughout the takeoff roll. Airplane and engine performance deficiencies are detected and annunciated. A novel and important feature of this segment is that it updates the estimated runway rolling friction coefficient. Airplane performance predictions also reflect changes in head wind occurring as the takeoff roll progresses. The system provides a head-down display and a head-up display. The head-up display is projected onto a partially reflective transparent surface through which the pilot views the runway. By comparing the present performance of the airplane with a predicted nominal performance based upon given conditions, performance deficiencies are detected by the system.

  3. Performance Evaluation and Benchmarking of Intelligent Systems

    SciTech Connect

    Madhavan, Raj; Messina, Elena; Tunstel, Edward

    2009-09-01

    To design and develop capable, dependable, and affordable intelligent systems, their performance must be measurable. Scientific methodologies for standardization and benchmarking are crucial for quantitatively evaluating the performance of emerging robotic and intelligent systems technologies. There is currently no accepted standard for quantitatively measuring the performance of these systems against user-defined requirements; and furthermore, there is no consensus on what objective evaluation procedures need to be followed to understand the performance of these systems. The lack of reproducible and repeatable test methods has precluded researchers working towards a common goal from exchanging and communicating results, inter-comparing system performance, and leveraging previous work that could otherwise avoid duplication and expedite technology transfer. Currently, this lack of cohesion in the community hinders progress in many domains, such as manufacturing, service, healthcare, and security. By providing the research community with access to standardized tools, reference data sets, and open source libraries of solutions, researchers and consumers will be able to evaluate the cost and benefits associated with intelligent systems and associated technologies. In this vein, the edited book volume addresses performance evaluation and metrics for intelligent systems, in general, while emphasizing the need and solutions for standardized methods. To the knowledge of the editors, there is not a single book on the market that is solely dedicated to the subject of performance evaluation and benchmarking of intelligent systems. Even books that address this topic do so only marginally or are out of date. The research work presented in this volume fills this void by drawing from the experiences and insights of experts gained both through theoretical development and practical implementation of intelligent systems in a variety of diverse application domains. The book presents

  4. SARDA HITL Simulations: System Performance Results

    NASA Technical Reports Server (NTRS)

    Gupta, Gautam

    2012-01-01

    This presentation gives an overview of the 2012 SARDA human-in-the-loop simulation, and presents a summary of system performance results from the simulation, including delay, throughput and fuel consumption

  5. Selecting umbilicals for control system performance

    SciTech Connect

    Kovit, S.

    1995-12-01

    This paper provides qualitative discussions and quantitative performance estimates to define the relationship between the size, material and length of umbilical lines and the performance of common types of subsea production control systems. Since performance is also a function of other parameters such as control fluid characteristics, platform and field geometries and the characteristics of the controlled functions; these are also considered in order to provide a more complete overview.

  6. A Behavior-Based Employee Performance System.

    ERIC Educational Resources Information Center

    Abernathy, William B.

    2003-01-01

    Discusses human performance technology models for describing and understanding factors involved in day-to-day functioning of employees and then to develop specific remedial interventions as needed, and contrasts it to an organizational performance system perspective used to design an organization before employees are even hired to prevent bad…

  7. The engineered barrier system: Performance issues

    SciTech Connect

    Pigford, T.H.

    1993-12-31

    The engineered barrier system (EBS) for geologic disposal of high-level waste may typically consist of the waste solid, a container, and a porous backfill. Whether the surrounding rock is part of the EBS is arguable, but the properties of the surrounding rock strongly affect the EBS performance. The EBS functions and performance issue are addressed.

  8. The NERSC Sustained System Performance (SSP) Metric

    SciTech Connect

    Kramer, William; Shalf, John; Strohmaier, Erich

    2005-09-18

    Most plans and reports recently discuss only one of four distinct purposes benchmarks are used. The obvious purpose is selection of a system from among its competitors, something that is the main focus of this paper. This purpose is well discussed in many workshops and reports. The second use of benchmarks is validating the selected system actually works the way expected once it arrives. This purpose may be more important than the first reason. The second purpose is particularly key when systems are specified and selected based on performance projections rather than actual runs on the actual hardware. The third use of benchmarks, seldom mentioned, is to assure the system performs as expected throughout its lifetime1, (e.g. after upgrades, changes, and regular use.) Finally, benchmarks are used to guide system designs, something covered in detail in a companion paper from Berkeley's Institute for Performance Studies (BIPS).

  9. Vitrification Facility integrated system performance testing report

    SciTech Connect

    Elliott, D.

    1997-05-01

    This report provides a summary of component and system performance testing associated with the Vitrification Facility (VF) following construction turnover. The VF at the West Valley Demonstration Project (WVDP) was designed to convert stored radioactive waste into a stable glass form for eventual disposal in a federal repository. Following an initial Functional and Checkout Testing of Systems (FACTS) Program and subsequent conversion of test stand equipment into the final VF, a testing program was executed to demonstrate successful performance of the components, subsystems, and systems that make up the vitrification process. Systems were started up and brought on line as construction was completed, until integrated system operation could be demonstrated to produce borosilicate glass using nonradioactive waste simulant. Integrated system testing and operation culminated with a successful Operational Readiness Review (ORR) and Department of Energy (DOE) approval to initiate vitrification of high-level waste (HLW) on June 19, 1996. Performance and integrated operational test runs conducted during the test program provided a means for critical examination, observation, and evaluation of the vitrification system. Test data taken for each Test Instruction Procedure (TIP) was used to evaluate component performance against system design and acceptance criteria, while test observations were used to correct, modify, or improve system operation. This process was critical in establishing operating conditions for the entire vitrification process.

  10. Hygrothermal Performance of West Coast Wood Deck Roofing System

    SciTech Connect

    Pallin, Simon B; Kehrer, Manfred; Desjarlais, Andre Omer

    2014-02-01

    Simulations of roofing assemblies are necessary in order to understand and adequately predict actual the hygrothermal performance. At the request of GAF, simulations have been setup to verify the difference in performance between white and black roofing membrane colors in relation to critical moisture accumulation for traditional low slope wood deck roofing systems typically deployed in various western U.S. Climate Zones. The performance of these roof assemblies has been simulated in the hygrothermal calculation tool of WUFI, from which the result was evaluated based on a defined criterion for moisture safety. The criterion was defined as the maximum accepted water content for wood materials and the highest acceptable moisture accumulation rate in relation to the risk of rot. Based on the criterion, the roof assemblies were certified as being either safe, risky or assumed to fail. The roof assemblies were simulated in different western climates, with varying insulation thicknesses, two different types of wooden decking, applied with varying interior moisture load and with either a high or low solar absorptivity at the roof surface (black or white surface color). The results show that the performance of the studied roof assemblies differs with regard to all of the varying parameters, especially the climate and the indoor moisture load.

  11. Performance modeling of nonconcentrating solar detoxification systems

    SciTech Connect

    March, M.; Martin, A.; Saltiel, C.

    1995-03-01

    A detailed simulation model is developed for predicting the performance of solar detoxification systems. Concentration profiles are determined via a method of lines approach during sunlight hours for acquired and synthetic (simulating clear and cloudy days) ultraviolet radiation intensity data. Verification of the model is performed with comparison against indoor laboratory and outdoor field test results. Simulations are performed over a range of design parameters to examine system sensitivity. Discussions are focused on the determination of optimal sizing and operating conditions. 17 refs., 8 figs.

  12. Apollo portable life support system performance report

    NASA Technical Reports Server (NTRS)

    Carson, M. A.

    1972-01-01

    The performance of the Apollo portable life support system (PLSS) on actual lunar missions is discussed. Both subjective comments by the crewmen and recorded telemetry data are evaluated although emphasis is on the telemetry data. Because the most important information yielded by the PLSS deals with determination of crewman metabolic rates, these data and their interpretation are explained in detail. System requirements are compared with actual performance, and the effect of performance margins on mission planning are described. Mission preparation testing is described to demonstrate how the mission readiness of the PLSS and the crewmen in verified, and to show how the PLSS and the crewmen are calibrated for mission evaluation.

  13. High Performance Commercial Fenestration Framing Systems

    SciTech Connect

    Mike Manteghi; Sneh Kumar; Joshua Early; Bhaskar Adusumalli

    2010-01-31

    A major objective of the U.S. Department of Energy is to have a zero energy commercial building by the year 2025. Windows have a major influence on the energy performance of the building envelope as they control over 55% of building energy load, and represent one important area where technologies can be developed to save energy. Aluminum framing systems are used in over 80% of commercial fenestration products (i.e. windows, curtain walls, store fronts, etc.). Aluminum framing systems are often required in commercial buildings because of their inherent good structural properties and long service life, which is required from commercial and architectural frames. At the same time, they are lightweight and durable, requiring very little maintenance, and offer design flexibility. An additional benefit of aluminum framing systems is their relatively low cost and easy manufacturability. Aluminum, being an easily recyclable material, also offers sustainable features. However, from energy efficiency point of view, aluminum frames have lower thermal performance due to the very high thermal conductivity of aluminum. Fenestration systems constructed of aluminum alloys therefore have lower performance in terms of being effective barrier to energy transfer (heat loss or gain). Despite the lower energy performance, aluminum is the choice material for commercial framing systems and dominates the commercial/architectural fenestration market because of the reasons mentioned above. In addition, there is no other cost effective and energy efficient replacement material available to take place of aluminum in the commercial/architectural market. Hence it is imperative to improve the performance of aluminum framing system to improve the energy performance of commercial fenestration system and in turn reduce the energy consumption of commercial building and achieve zero energy building by 2025. The objective of this project was to develop high performance, energy efficient commercial

  14. Optimizing Hydronic System Performance in Residential Applications

    SciTech Connect

    2013-10-01

    Even though new homes constructed with hydronic heat comprise only 3% of the market (US Census Bureau 2009), of the 115 million existing homes in the United States, almost 14 million of those homes (11%) are heated with steam or hot water systems according to 2009 US Census data. Therefore, improvements in hydronic system performance could result in significant energy savings in the US.

  15. Diversity in School Performance Feedback Systems

    ERIC Educational Resources Information Center

    Verhaeghe, Goedele; Schildkamp, Kim; Luyten, Hans; Valcke, Martin

    2015-01-01

    As data-based decision making is receiving increased attention in education, more and more school performance feedback systems (SPFSs) are being developed and used worldwide. These systems provide schools with data on their functioning. However, little research is available on the characteristics of the different SPFSs. Therefore, this study…

  16. Measuring Performance with Library Automated Systems.

    ERIC Educational Resources Information Center

    OFarrell, John P.

    2000-01-01

    Investigates the capability of three library automated systems to generate some of the datasets necessary to form the ISO (International Standards Organization) standard on performance measurement within libraries, based on research in Liverpool John Moores University (United Kingdom). Concludes that the systems are weak in generating the…

  17. SIMS prototype system 4 - performance test report

    NASA Technical Reports Server (NTRS)

    1978-01-01

    A self-contained, preassembled air type solar system, designed for installation remote from the dwelling, to provide space heating and hot water was evaluated. Data analysis is included which documents the system performance and verifies its suitability for field installation.

  18. Shared performance monitor in a multiprocessor system

    DOEpatents

    Chiu, George; Gara, Alan G.; Salapura, Valentina

    2012-07-24

    A performance monitoring unit (PMU) and method for monitoring performance of events occurring in a multiprocessor system. The multiprocessor system comprises a plurality of processor devices units, each processor device for generating signals representing occurrences of events in the processor device, and, a single shared counter resource for performance monitoring. The performance monitor unit is shared by all processor cores in the multiprocessor system. The PMU comprises: a plurality of performance counters each for counting signals representing occurrences of events from one or more the plurality of processor units in the multiprocessor system; and, a plurality of input devices for receiving the event signals from one or more processor devices of the plurality of processor units, the plurality of input devices programmable to select event signals for receipt by one or more of the plurality of performance counters for counting, wherein the PMU is shared between multiple processing units, or within a group of processors in the multiprocessing system. The PMU is further programmed to monitor event signals issued from non-processor devices.

  19. A Perspective on DSN System Performance Analysis

    NASA Technical Reports Server (NTRS)

    Pham, Timothy T.

    2006-01-01

    This paper discusses the performance analysis effort being carried out in the NASA Deep Space Network. The activity involves root cause analysis of failures and assessment of key performance metrics. The root cause analysis helps pinpoint the true cause of observed problems so that proper correction can be effected. The assessment currently focuses on three aspects: (1) data delivery metrics such as Quantity, Quality, Continuity, and Latency; (2) link-performance metrics such as antenna pointing, system noise temperature, Doppler noise, frequency and time synchronization, wide-area-network loading, link-configuration setup time; and (3) reliability, maintainability, availability metrics. The analysis establishes whether the current system is meeting its specifications and if so, how much margin is available. The findings help identify the weak points in the system and direct attention of programmatic investment for performance improvement.

  20. Monitoring SLAC High Performance UNIX Computing Systems

    SciTech Connect

    Lettsome, Annette K.; /Bethune-Cookman Coll. /SLAC

    2005-12-15

    Knowledge of the effectiveness and efficiency of computers is important when working with high performance systems. The monitoring of such systems is advantageous in order to foresee possible misfortunes or system failures. Ganglia is a software system designed for high performance computing systems to retrieve specific monitoring information. An alternative storage facility for Ganglia's collected data is needed since its default storage system, the round-robin database (RRD), struggles with data integrity. The creation of a script-driven MySQL database solves this dilemma. This paper describes the process took in the creation and implementation of the MySQL database for use by Ganglia. Comparisons between data storage by both databases are made using gnuplot and Ganglia's real-time graphical user interface.

  1. Investigating the performance of a minienvironment system

    SciTech Connect

    Xu, Tengfang

    2005-05-20

    A minienvironment is a localized environment created by an enclosure to isolate a product or process from the surrounding environment. Minienvironments have been gaining popularity to provide effective containment for critical contamination control. The use of minienvironments can provide several orders of magnitude improvement in particle cleanliness levels, while energy intensity may be shifted from the conventional cleanroom systems to the minienvironments that enclose the specific process. The purpose of this paper is to study the energy performance of a minienvironment air system in a ballroom setting, to quantify power density of such a system, and to identify areas for energy savings from high-performance minienvironments.

  2. A systems approach to high performance oscillators

    NASA Technical Reports Server (NTRS)

    Stein, S. R.; Manney, C. M., Jr.; Walls, F. L.; Gray, J. E.; Besson, R. J.

    1978-01-01

    The purpose of this paper is to show how systems composed of multiple oscillators and resonators can achieve superior performance compared to a single oscillator. Experimental results are presented for two systems based on quartz crystals which provide state-of-the-art stability over a much wider range of averaging times than has been previously achieved. One system has achieved a factor of five improvement in noise floor compared to all previously reported results.

  3. Airplane takeoff and landing performance monitoring system

    NASA Technical Reports Server (NTRS)

    Middleton, David B. (Inventor); Srivatsan, Raghavachari (Inventor); Person, Lee H. (Inventor)

    1989-01-01

    The invention is a real-time takeoff and landing performance monitoring system which provides the pilot with graphic and metric information to assist in decisions related to achieving rotation speed (V sub R) within the safe zone of the runway or stopping the aircraft on the runway after landing or take off abort. The system processes information in two segments: a pretakeoff segment and a real-time segment. One-time inputs of ambient conditions and airplane configuration information are used in the pretakeoff segment to generate scheduled performance data. The real-time segment uses the scheduled performance data, runway length data and transducer measured parameters to monitor the performance of the airplane throughout the takeoff roll. An important feature of this segment is that it updates the estimated runway rolling friction coefficient. Airplane performance predictions also reflect changes in headwind occurring as the takeoff roll progresses. The system displays the position of the airplane on the runway, indicating runway used and runway available, summarizes the critical information into a situation advisory flag, flags engine failures and off-nominal acceleration performance, and indicates where on the runway particular events such as decision speed (V sub 1), rotation speed (V sub R) and expected stop points will occur based on actual or predicted performance. The display also indicates airspeed, wind vector, engine pressure ratios, second segment climb speed, and balanced field length (BFL). The system detects performance deficiencies by comparing the airplane's present performance with a predicted nominal performance based upon the given conditions.

  4. Performance characterization of material identification systems

    NASA Astrophysics Data System (ADS)

    Brown, Christopher D.; Green, Robert L.

    2006-10-01

    In recent years a number of analytical devices have been proposed and marketed specifically to enable field-based material identification. Technologies reliant on mass, near- and mid-infrared, and Raman spectroscopies are available today, and other platforms are imminent. These systems tend to perform material recognition based on an on-board library of material signatures. While figures of merit for traditional quantitative analytical sensors are broadly established (e.g., SNR, selectivity, sensitivity, limit of detection/decision), measures of performance for material identification systems have not been systematically discussed. In this paper we present an approach to performance characterization similar in spirit to ROC curves, but including elements of precision-recall curves and specialized for the intended-use of material identification systems. Important experimental considerations are discussed, including study design, sources of bias, uncertainty estimation, and cross-validation and the approach as a whole is illustrated using a commercially available handheld Raman material identification system.

  5. Adequation of mini satellites to oceanic altimetry missions

    NASA Astrophysics Data System (ADS)

    Bellaieche, G.; Aguttes, J. P.

    1993-01-01

    Association of the mini satellite concept and oceanic altimetry missions is discussed. Mission definition and most constraining requirements (mesoscale for example) demonstrate mini satellites to be quite adequate for such missions. Progress in altimeter characteristics, orbit determination, and position reporting allow consideration of oceanic altimetry missions using low Earth orbit satellites. Satellite constellation, trace keeping and orbital period, and required payload characteristics are exposed. The mission requirements covering Sun synchronous orbit, service area, ground system, and launcher characteristics as well as constellation maintenance strategy are specified. Two options for the satellite, orbital mechanics, propulsion, onboard power and stabilizing subsystems, onboard management, satellite ground linkings, mechanical and thermal subsystems, budgets, and planning are discussed.

  6. MACAO-VLTI adaptive optics systems performance

    NASA Astrophysics Data System (ADS)

    Arsenault, Robin; Donaldson, Rob; Dupuy, Christophe; Fedrigo, Enrico; Hubin, Norbert N.; Ivanescu, Liviu; Kasper, Markus E.; Oberti, Sylvain; Paufique, Jerome; Rossi, Silvio; Silber, Armin; Delabre, Bernhard; Lizon, Jean-Louis; Gigan, Pierre

    2004-10-01

    In April and August "03 two MACAO-VLTI curvature AO systems were installed on the VLT telescopes unit 2 and 3 in Paranal (Chile). These are 60 element systems using a 150mm bimorph deformable mirror and 60 APD"s as WFS detectors. Valuable integration & commissioning experience has been gained during these 2 missions. Several tests have been performed in order to evaluate system performance on the sky. The systems have proven to be extremely robust, performing in a stable fashion in extreme seeing condition (seeing up to 3"). Strehl ratio of 0.65 and residual tilt smaller than 10 mas have been obtained on the sky in 0.8" seeing condition. Weak guide source performance is also excellent with a strehl of 0.26 on a V~16 magnitude star. Several functionalities have been successfully tested including: chopping, off-axis guiding, atmospheric refraction compensation etc. The AO system can be used in a totally automatic fashion with a small overhead: the AO loop can be closed on the target less than 60 sec after star acquisition by the telescope. It includes reading the seeing value given by the site monitor, evaluate the guide star magnitude (cycling through neutral density filters) setting the close-loop AO parameters (system gain and vibrating membrane mirror stroke) including calculation of the command-matrix. The last 2 systems will be installed in August "04 and in the course of 2005.

  7. Human system interaction measures: An approach to improve system performance

    SciTech Connect

    Blackman, H.S.

    1990-01-01

    This paper presents an approach for the analysis of system performance. This approach is based upon a functional model of the system, and performance measures of that system. The paper also presents a model of total system performance which is composed of the following three parts: challenges (the challenge represented by the scenario), functions (the resources available to be applied to the challenge), and sequence (how resources are used to cope with the challenge). The approach and model are applied and presented in a civil aviation application. 2 figs.

  8. Performance analysis of memory hierachies in high performance systems

    SciTech Connect

    Yogesh, A.

    1993-07-01

    This thesis studies memory bandwidth as a performance predictor of programs. The focus of this work is on computationally intensive programs. These programs are the most likely to access large amounts of data, stressing the memory system. Computationally intensive programs are also likely to use highly optimizing compilers to produce the fastest executables possible. Methods to reduce the amount of data traffic by increasing the average number of references to each item while it resides in the cache are explored. Increasing the average number of references to each cache item reduces the number of memory requests. Chapter 2 describes the DLX architecture. This is the architecture on which all the experiments were performed. Chapter 3 studies memory moves as a performance predictor for a group of application programs. Chapter 4 introduces a model to study the performance of programs in the presence of memory hierarchies. Chapter 5 explores some compiler optimizations that can help increase the references to each item while it resides in the cache.

  9. PERFORMANCE OF THE AGS TRANSITION JUMP SYSTEM.

    SciTech Connect

    AHRENS,L.A.; BRENNAN,J.M.; GLENN,J.W.; ROSER,T.; VAN ASSELT,W.K.

    1999-03-29

    The transition jump system has been indispensable to the high intensity proton operation of the AGS complex. Nevertheless, transition crossing remains one of the major hurdles as the accelerator complex intensity is pushed upward. To enhance the performance of the system ''quadrupole pumping'' in the Booster is used to minimize the necessary longitudinal dilution of the beam on the AGS injection porch. During the transition jump sextupole correctors at strategic locations are pulsed to minimize the effects of the chromatic non-linearity of the jump system. The available instrumentation for diagnosing the performance of the system will be described, along with installed hardware to counter the non-linear effects of the transition jump system.

  10. Weighted contrast metric for imaging system performance

    NASA Astrophysics Data System (ADS)

    Teaney, Brian P.

    2012-06-01

    There have been significant improvements in the image quality metrics used in the NVESD model suite in recent years. The introduction of the Targeting Task Performance (TTP) metric to replace the Johnson criteria yielded significantly more accurate predictions for under-sampled imaging systems in particular. However, there are certain cases which cause the TTP metric to predict optimistic performance. In this paper a new metric for predicting performance of imaging systems is described. This new weighted contrast metric is characterized as a hybrid of the TTP metric and Johnson criteria. Results from a number of historical perception studies are presented to compare the performance of the TTP metric and Johnson criteria to the newly proposed metric.

  11. System performance analysis of stretched membrane heliostats

    SciTech Connect

    Anderson, J V; Murphy, L M; Short, W; Wendelin, T

    1985-12-01

    The optical performance of both focused and unfocused stretched membrane heliostats was examined in the context of the overall cost and performance of central receiver systems. The sensitivity of optical performance to variations in design parameters such as the system size (capacity), delivery temperature, heliostat size, and heliostat surface quality was also examined. The results support the conclusion that focused stretched membrane systems provide an economically attractive alternative to current glass/metal heliostats over essentially the entire range of design parameters studied. In addition, unfocused stretched membrane heliostats may be attractive for a somewhat more limited range of applications, which would include the larger plant sizes (e.g., 450 MW) and lower delivery temperatures (e.g., 450/sup 0/C), or situations in which the heliostat size could economically be reduced.

  12. Performance management system enhancement and maintenance

    NASA Technical Reports Server (NTRS)

    Cleaver, T. G.; Ahour, R.; Johnson, B. R.

    1984-01-01

    The research described in this report concludes a two-year effort to develop a Performance Management System (PMS) for the NCC computers. PMS provides semi-automated monthly reports to NASA and contractor management on the status and performance of the NCC computers in the TDRSS program. Throughout 1984, PMS was tested, debugged, extended, and enhanced. Regular PMS monthly reports were produced and distributed. PMS continues to operate at the NCC under control of Bendix Corp. personnel.

  13. A guide for performing system safety analysis

    NASA Technical Reports Server (NTRS)

    Brush, J. M.; Douglass, R. W., III.; Williamson, F. R.; Dorman, M. C. (Editor)

    1974-01-01

    A general guide is presented for performing system safety analyses of hardware, software, operations and human elements of an aerospace program. The guide describes a progression of activities that can be effectively applied to identify hazards to personnel and equipment during all periods of system development. The general process of performing safety analyses is described; setting forth in a logical order the information and data requirements, the analytical steps, and the results. These analyses are the technical basis of a system safety program. Although the guidance established by this document cannot replace human experience and judgement, it does provide a methodical approach to the identification of hazards and evaluation of risks to the system.

  14. System Performance Projections for TPV Energy Conversion

    SciTech Connect

    PF Baldasaro; MW Dashiell; JE Oppenlander; JL Vell; P Fourspring; K Rahner; LR Danielson; S Burger; E Brown

    2004-06-09

    TPV technology has advanced rapidly in the last five years, with diode conversion efficiency approaching >30%, and filter efficiency of {approx}80%. These achievements have enabled repeatable testing of 20% efficient small systems, demonstrating the potential of TPV energy conversion. Near term technology gains support a 25% efficient technology demonstration in the two year timeframe. However, testing of full size systems, which includes efficiency degradation mechanisms, such as: nonuniform diode illumination, diode and filter variability, temperature non-uniformities, conduction/convection losses, and lifetime reliability processes needs to be performed. A preliminary analysis of these differential effects has been completed, and indicates a near term integrated system efficiency of {approx}15% is possible using current technology, with long term growth to 18-20%. This report addresses the system performance issues.

  15. 21 CFR 201.5 - Drugs; adequate directions for use.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Drugs; adequate directions for use. 201.5 Section...) DRUGS: GENERAL LABELING General Labeling Provisions § 201.5 Drugs; adequate directions for use. Adequate directions for use means directions under which the layman can use a drug safely and for the purposes...

  16. 21 CFR 201.5 - Drugs; adequate directions for use.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 4 2011-04-01 2011-04-01 false Drugs; adequate directions for use. 201.5 Section...) DRUGS: GENERAL LABELING General Labeling Provisions § 201.5 Drugs; adequate directions for use. Adequate directions for use means directions under which the layman can use a drug safely and for the purposes...

  17. 4 CFR 200.14 - Responsibility for maintaining adequate safeguards.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 4 Accounts 1 2010-01-01 2010-01-01 false Responsibility for maintaining adequate safeguards. 200.14 Section 200.14 Accounts RECOVERY ACCOUNTABILITY AND TRANSPARENCY BOARD PRIVACY ACT OF 1974 § 200.14 Responsibility for maintaining adequate safeguards. The Board has the responsibility for maintaining adequate technical, physical, and...

  18. 10 CFR 1304.114 - Responsibility for maintaining adequate safeguards.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Responsibility for maintaining adequate safeguards. 1304.114 Section 1304.114 Energy NUCLEAR WASTE TECHNICAL REVIEW BOARD PRIVACY ACT OF 1974 § 1304.114 Responsibility for maintaining adequate safeguards. The Board has the responsibility for maintaining adequate technical, physical, and security...

  19. 10 CFR 1304.114 - Responsibility for maintaining adequate safeguards.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Responsibility for maintaining adequate safeguards. 1304.114 Section 1304.114 Energy NUCLEAR WASTE TECHNICAL REVIEW BOARD PRIVACY ACT OF 1974 § 1304.114 Responsibility for maintaining adequate safeguards. The Board has the responsibility for maintaining adequate technical, physical, and security...

  20. 4 CFR 200.14 - Responsibility for maintaining adequate safeguards.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 4 Accounts 1 2011-01-01 2011-01-01 false Responsibility for maintaining adequate safeguards. 200....14 Responsibility for maintaining adequate safeguards. The Board has the responsibility for maintaining adequate technical, physical, and security safeguards to prevent unauthorized disclosure...

  1. Management issues for high performance storage systems

    SciTech Connect

    Louis, S.; Burris, R.

    1995-03-01

    Managing distributed high-performance storage systems is complex and, although sharing common ground with traditional network and systems management, presents unique storage-related issues. Integration technologies and frameworks exist to help manage distributed network and system environments. Industry-driven consortia provide open forums where vendors and users cooperate to leverage solutions. But these new approaches to open management fall short addressing the needs of scalable, distributed storage. We discuss the motivation and requirements for storage system management (SSM) capabilities and describe how SSM manages distributed servers and storage resource objects in the High Performance Storage System (HPSS), a new storage facility for data-intensive applications and large-scale computing. Modem storage systems, such as HPSS, require many SSM capabilities, including server and resource configuration control, performance monitoring, quality of service, flexible policies, file migration, file repacking, accounting, and quotas. We present results of initial HPSS SSM development including design decisions and implementation trade-offs. We conclude with plans for follow-on work and provide storage-related recommendations for vendors and standards groups seeking enterprise-wide management solutions.

  2. Performance of Integrated Hydronic Heating Systems.

    SciTech Connect

    BUTCHER,T.A.

    2007-12-20

    A variety of system configurations are used in North America to meet the heating and domestic hot water needs of single-family homes. This includes, for example: warm air furnaces with electric water heaters; boilers with integrated hot water coils; and boilers with 'indirect' hot water storage tanks. Integrated hydronic systems which provide both heat and hot water are more popular only in the Northeast and mid-Atlantic regions. For those making decisions about configurations of these integrated hydronic systems, including control options, little information is available concerning the annual energy cost implications of these decisions. This report presents results of a project to use a direct load emulation approach to measure the performance of hydronic systems, develop performance curves, and to provide decision tools to consumers. This is a laboratory measurement system involving direct energy input and output measurements under different load patterns. These results are then used to develop performance correlations for specific systems that can be used to predict energy use in specific applications. A wide range of system types have been tested under this project including conventional boilers with 'tankless' internal coils for domestic hot water production, boilers with indirect external storage tanks, tank type water heaters which may also be used for space heating, condensing oil- and gas-fired systems, and systems with custom control features. It is shown that low load and idle energy losses can have a very large impact on the total annual energy use and that the potential energy savings associated with replacing old equipment with newer, high efficiency equipment with low losses at idle or low load can be in the 25% range. These savings are larger than simple combustion efficiency measurements would indicate.

  3. Calculation of the Cost of an Adequate Education in Kentucky: A Professional Judgment Approach

    ERIC Educational Resources Information Center

    Verstegen, Deborah A.

    2004-01-01

    What is an adequate education and how much does it cost? In 1989, Kentucky's State Supreme Court found the entire system of education unconstitutional--"all of its parts and parcels". The Court called for all children to have access to an adequate education, one that is uniform and has as its goal the development of seven capacities, including:…

  4. EVALUATION OF CONFOCAL MICROSCOPY SYSTEM PERFORMANCE

    EPA Science Inventory

    BACKGROUND. The confocal laser scanning microscope (CLSM) has enormous potential in many biological fields. Currently there is a subjective nature in the assessment of a confocal microscope's performance by primarily evaluating the system with a specific test slide provided by ea...

  5. Domains of the Florida Performance Measurement System.

    ERIC Educational Resources Information Center

    Florida State Dept. of Education, Tallahassee.

    This monograph sets forth in detail the concepts included in the five domains of teaching as identified by the Florida Coalition for the Development of a Performance Evaluation System. The first domain, planning, includes the concepts: (1) content coverage; (2) utilization of instructional materials; (3) activity structure; (4) goal focusing; and…

  6. Performance Engineering as an Expert System.

    ERIC Educational Resources Information Center

    Harmon, Paul

    1984-01-01

    Considers three powerful techniques--heuristics, context trees, and search via backward chaining--that a knowledge engineer might employ to develop an expert system to automate performance engineering, i.e., the branch of instructional technology that focuses on the problems of business and industry. (MBR)

  7. South Africa's School Infrastructure Performance Indicator System

    ERIC Educational Resources Information Center

    Gibberd, Jeremy

    2007-01-01

    While some South African schools have excellent infrastructure, others lack basic services such as water and sanitation. This article describes the school infrastructure performance indicator system (SIPIS) in South Africa. The project offers an approach that can address both the urgent provision of basic services as well as support the…

  8. PERFORMANCE TESTING OF FOUR SKIMMING SYSTEMS

    EPA Science Inventory

    Performance tests were conducted at the U.S. Environmental Protection Agency's oil and hazardous simulated environmental test tank (OHMSETT) on four commercial oil spill cleanup devices: the Sapiens Sirene skimming system, the Oil Mop remote skimmer, the Troil/Destroil skimming s...

  9. Developing Electronic Performance Support Systems for Professionals.

    ERIC Educational Resources Information Center

    Law, Michael P.; And Others

    This paper discusses a variety of development strategies and issues involved in the development of electronic performance support systems (EPSS) for professionals. The topics of front-end analysis, development, and evaluation are explored in the context of a case study involving the development of an EPSS to support teachers in the use of…

  10. CONFOCAL MICROSCOPY SYSTEM PERFORMANCE: AXIAL RESOLUTION

    EPA Science Inventory

    Abstract

    Confocal Microscopy System Performance: Axial resolution.
    Robert M. Zucker, PhD

    Reproductive Toxicology Division, National Health and Environmental Effects Research Laboratory, Office of Research and Development, U.S. Environmental Protection Agency, Re...

  11. Perspectives on Electronic Performance Support Systems.

    ERIC Educational Resources Information Center

    Scales, Glenda Rose; Yang, Chia-Shing

    The complexity of the modern workplace means that decision makers are entertaining the idea of providing employees with software applications that are designed to provide true support and on-the-job training from the employee's desktop computer. An electronic performance support system (EPSS) is the tool that can make such training a reality when…

  12. Designing a Systems Approach to Performance Management.

    ERIC Educational Resources Information Center

    Massaro, Maureen; Westman, David

    1998-01-01

    Chronicles development and implementation of a performance-management system for nonfaculty employees at Wittenberg University (Ohio). The initiative featured principles of continuous quality improvement. Seven key lessons learned are presented for other institutions, including selection of the design team, changing the status quo, defining and…

  13. Electronic Performance Support Systems and Technological Literacy

    ERIC Educational Resources Information Center

    Maughan, George R.

    2005-01-01

    Electronic performance support systems (EPSS) can provide alternative learning opportunities to supplement traditional classroom or training strategies. Today's students may benefit from educational settings and strategies that they will use in the future. In using EPSS to nurture the development of technological literacy, workers and students can…

  14. ROI Calculations for Electronic Performance Support Systems.

    ERIC Educational Resources Information Center

    Altalib, Hasan

    2002-01-01

    Discusses the importance of calculating the return on investment (ROI) for electronic performance support systems, beginning with the practical issues of identifying what will be measured and then assigning costs and benefits to each variable in monetary terms. Suggests the challenge is in defining and quantifying the real business benefits.…

  15. High Performance Work Systems for Online Education

    ERIC Educational Resources Information Center

    Contacos-Sawyer, Jonna; Revels, Mark; Ciampa, Mark

    2010-01-01

    The purpose of this paper is to identify the key elements of a High Performance Work System (HPWS) and explore the possibility of implementation in an online institution of higher learning. With the projected rapid growth of the demand for online education and its importance in post-secondary education, providing high quality curriculum, excellent…

  16. Performance metrics for an airborne imaging system

    NASA Astrophysics Data System (ADS)

    Dayton, David C.; Gonglewski, John D.

    2004-11-01

    A series of airborne imaging experiments have been conducted on the island of Maui and at North Oscura Peak in New Mexico. Two platform altitudes were considered 3000 meters and 600 meters, both with a slant range to the target up to 10000 meters. The airborne imaging platform was a Twin Otter aircraft, which circled ground target sites. The second was a fixed platform on a mountain peak overlooking a valley 600 meters below. The experiments were performed during the day using solar illuminated target buildings. Imaging system performance predictions were calculated using standard atmospheric turbulence models, and aircraft boundary layer models. Several different measurement approaches were then used to estimate the actual system performance, and make comparisons with the calculations.

  17. RHIC Sextant Test - Accelerator Systems and Performance

    NASA Astrophysics Data System (ADS)

    Pilat, F.; Ahrens, L.; Brown, K.; Connolly, R.; dell, G. F.; Fischer, W.; Kewisch, J.; Mackay, W.; Mane, V.; Peggs, S.; Satogata, T.; Tepikian, S.; Thompson, P.; Trbojevic, D.; Tsoupas, N.; Wei, J.

    1997-05-01

    One sextant of the RHIC collider and the full AtR (AGS to RHIC) transfer line have been commissioned in early 1997 with beam. We describe here the design and performance of the accelerator systems during the test, such as the magnet and power supply systems, instrumentation subsystems and application software. After reviewing the main milestones of the commissioning we describe a ramping test without beam that took place after the commissioning with beam. Finally, we analyze the implications of accelerator systems preformance and their impact on the plannig for RHIC installation and commissioning.

  18. Problem reporting management system performance simulation

    NASA Technical Reports Server (NTRS)

    Vannatta, David S.

    1993-01-01

    This paper proposes the Problem Reporting Management System (PRMS) model as an effective discrete simulation tool that determines the risks involved during the development phase of a Trouble Tracking Reporting Data Base replacement system. The model considers the type of equipment and networks which will be used in the replacement system as well as varying user loads, size of the database, and expected operational availability. The paper discusses the dynamics, stability, and application of the PRMS and addresses suggested concepts to enhance the service performance and enrich them.

  19. High performance VLSI telemetry data systems

    NASA Technical Reports Server (NTRS)

    Chesney, J.; Speciale, N.; Horner, W.; Sabia, S.

    1990-01-01

    NASA's deployment of major space complexes such as Space Station Freedom (SSF) and the Earth Observing System (EOS) will demand increased functionality and performance from ground based telemetry acquisition systems well above current system capabilities. Adaptation of space telemetry data transport and processing standards such as those specified by the Consultative Committee for Space Data Systems (CCSDS) standards and those required for commercial ground distribution of telemetry data, will drive these functional and performance requirements. In addition, budget limitations will force the requirement for higher modularity, flexibility, and interchangeability at lower cost in new ground telemetry data system elements. At NASA's Goddard Space Flight Center (GSFC), the design and development of generic ground telemetry data system elements, over the last five years, has resulted in significant solutions to these problems. This solution, referred to as the functional components approach includes both hardware and software components ready for end user application. The hardware functional components consist of modern data flow architectures utilizing Application Specific Integrated Circuits (ASIC's) developed specifically to support NASA's telemetry data systems needs and designed to meet a range of data rate requirements up to 300 Mbps. Real-time operating system software components support both embedded local software intelligence, and overall system control, status, processing, and interface requirements. These components, hardware and software, form the superstructure upon which project specific elements are added to complete a telemetry ground data system installation. This paper describes the functional components approach, some specific component examples, and a project example of the evolution from VLSI component, to basic board level functional component, to integrated telemetry data system.

  20. Performance comparison of streak camera recording systems

    SciTech Connect

    Derzon, M.; Barber, T.

    1995-07-01

    Streak camera based diagnostics are vital to the inertial confinement fusion program at Sandia National Laboratories. Performance characteristics of various readout systems coupled to an EGG-AVO streak camera were analyzed and compared to scaling estimates. The purpose of the work was to determine the limits of the streak camera performance and the optimal fielding conditions for the Amador Valley Operations (AVO) streak camera systems. The authors measured streak camera limitations in spatial resolution and sensitivity. Streak camera limits on spatial resolution are greater than 18 lp/mm at 4% contrast. However, it will be difficult to make use of any resolution greater than this because of high spatial frequency variation in the photocathode sensitivity. They have measured a signal to noise of 3,000 with 0.3 mW/cm{sup 2} of 830 nm light at a 10 ns/mm sweep speed. They have compared lens coupling systems with and without micro-channel plate intensifiers and systems using film or charge coupled device (CCD) readout. There were no conditions where film was found to be an improvement over the CCD readout. Systems utilizing a CCD readout without an intensifier have comparable resolution, for these source sizes and at a nominal cost in signal to noise of 3, over those with an intensifier. Estimates of the signal-to-noise for different light coupling methods show how performance can be improved.

  1. Performance of deep geothermal energy systems

    NASA Astrophysics Data System (ADS)

    Manikonda, Nikhil

    Geothermal energy is an important source of clean and renewable energy. This project deals with the study of deep geothermal power plants for the generation of electricity. The design involves the extraction of heat from the Earth and its conversion into electricity. This is performed by allowing fluid deep into the Earth where it gets heated due to the surrounding rock. The fluid gets vaporized and returns to the surface in a heat pipe. Finally, the energy of the fluid is converted into electricity using turbine or organic rankine cycle (ORC). The main feature of the system is the employment of side channels to increase the amount of thermal energy extracted. A finite difference computer model is developed to solve the heat transport equation. The numerical model was employed to evaluate the performance of the design. The major goal was to optimize the output power as a function of parameters such as thermal diffusivity of the rock, depth of the main well, number and length of lateral channels. The sustainable lifetime of the system for a target output power of 2 MW has been calculated for deep geothermal systems with drilling depths of 8000 and 10000 meters, and a financial analysis has been performed to evaluate the economic feasibility of the system for a practical range of geothermal parameters. Results show promising an outlook for deep geothermal systems for practical applications.

  2. Online Monitoring System for Performance Fault Detection

    SciTech Connect

    Gioiosa, Roberto; Kestor, Gokcen; Kerbyson, Darren J.

    2014-12-31

    To achieve the exaFLOPS performance within a contained power budget, next generation supercomputers will feature hundreds of millions of components operating at low- and near-threshold voltage. As the probability that at least one of these components fails during the execution of an application approaches certainty, it seems unrealistic to expect that any run of a scientific application will not experience some performance faults. We believe that there is need of a new generation of light-weight performance and debugging tools that can be used online even during production runs of parallel applications and that can identify performance anomalies during the application execution. In this work we propose the design and implementation of such a monitoring system.

  3. Summary of photovoltaic system performance models

    SciTech Connect

    Smith, J. H.; Reiter, L. J.

    1984-01-15

    The purpose of this study is to provide a detailed overview of photovoltaics (PV) performance modeling capabilities that have been developed during recent years for analyzing PV system and component design and policy issues. A set of 10 performance models have been selected which span a representative range of capabilities from generalized first-order calculations to highly specialized electrical network simulations. A set of performance modeling topics and characteristics is defined and used to examine some of the major issues associated with photovoltaic performance modeling. Next, each of the models is described in the context of these topics and characteristics to assess its purpose, approach, and level of detail. Then each of the issues is discussed in terms of the range of model capabilities available and summarized in tabular form for quick reference. Finally, the models are grouped into categories to illustrate their purposes and perspectives.

  4. Online Monitoring System for Performance Fault Detection

    SciTech Connect

    Gioiosa, Roberto; Kestor, Gokcen; Kerbyson, Darren J.

    2014-05-19

    To achieve the exaFLOPS performance within a contain power budget, next supercomputers will feature hundreds of millions of components operating at low- and near-threshold voltage. As the probability that at least one of these components fails during the execution of an application approaches certainty, it seems unrealistic to expect that any run of a scientific application will not experience some performance faults. We believe that there is need of a new generation of light-weight performance and debugging tools that can be used online even during production runs of parallel applications and that can identify performance anomalies during the application execution. In this work we propose the design and implementation of a monitoring system that continuously inspects the evolution of run

  5. Summary of photovoltaic system performance models

    NASA Technical Reports Server (NTRS)

    Smith, J. H.; Reiter, L. J.

    1984-01-01

    A detailed overview of photovoltaics (PV) performance modeling capabilities developed for analyzing PV system and component design and policy issues is provided. A set of 10 performance models are selected which span a representative range of capabilities from generalized first order calculations to highly specialized electrical network simulations. A set of performance modeling topics and characteristics is defined and used to examine some of the major issues associated with photovoltaic performance modeling. Each of the models is described in the context of these topics and characteristics to assess its purpose, approach, and level of detail. The issues are discussed in terms of the range of model capabilities available and summarized in tabular form for quick reference. The models are grouped into categories to illustrate their purposes and perspectives.

  6. SIGPI. Fault Tree Cut Set System Performance

    SciTech Connect

    Patenaude, C.J.

    1992-01-14

    SIGPI computes the probabilistic performance of complex systems by combining cut set or other binary product data with probability information on each basic event. SIGPI is designed to work with either coherent systems, where the system fails when certain combinations of components fail, or noncoherent systems, where at least one cut set occurs only if at least one component of the system is operating properly. The program can handle conditionally independent components, dependent components, or a combination of component types and has been used to evaluate responses to environmental threats and seismic events. The three data types that can be input are cut set data in disjoint normal form, basic component probabilities for independent basic components, and mean and covariance data for statistically dependent basic components.

  7. SIGPI. Fault Tree Cut Set System Performance

    SciTech Connect

    Patenaude, C.J.

    1992-01-13

    SIGPI computes the probabilistic performance of complex systems by combining cut set or other binary product data with probability information on each basic event. SIGPI is designed to work with either coherent systems, where the system fails when certain combinations of components fail, or noncoherent systems, where at least one cut set occurs only if at least one component of the system is operating properly. The program can handle conditionally independent components, dependent components, or a combination of component types and has been used to evaluate responses to environmental threats and seismic events. The three data types that can be input are cut set data in disjoint normal form, basic component probabilities for independent basic components, and mean and covariance data for statistically dependent basic components.

  8. Performance Analysis on Fault Tolerant Control System

    NASA Technical Reports Server (NTRS)

    Shin, Jong-Yeob; Belcastro, Christine

    2005-01-01

    In a fault tolerant control (FTC) system, a parameter varying FTC law is reconfigured based on fault parameters estimated by fault detection and isolation (FDI) modules. FDI modules require some time to detect fault occurrences in aero-vehicle dynamics. In this paper, an FTC analysis framework is provided to calculate the upper bound of an induced-L(sub 2) norm of an FTC system with existence of false identification and detection time delay. The upper bound is written as a function of a fault detection time and exponential decay rates and has been used to determine which FTC law produces less performance degradation (tracking error) due to false identification. The analysis framework is applied for an FTC system of a HiMAT (Highly Maneuverable Aircraft Technology) vehicle. Index Terms fault tolerant control system, linear parameter varying system, HiMAT vehicle.

  9. Fault Tree Cut Set System Performance.

    2000-02-21

    Version 00 SIGPI computes the probabilistic performance of complex systems by combining cut set or other binary product data with probability information on each basic event. SIGPI is designed to work with either coherent systems, where the system fails when certain combinations of components fail, or noncoherent systems, where at least one cut set occurs only if at least one component of the system is operating properly. The program can handle conditionally independent components, dependentmore » components, or a combination of component types and has been used to evaluate responses to environmental threats and seismic events. The three data types that can be input are cut set data in disjoint normal form, basic component probabilities for independent basic components, and mean and covariance data for statistically dependent basic components.« less

  10. Workshop on system tuning, performance measurement and performance optimization of an RSX11M system

    SciTech Connect

    Downward, J.G.

    1981-05-20

    Topics discussed include thrashing in an RSX11M system - what to do; using solid state disk emulators as the swapping device - performance improvement, performance measurement techniques; capacity planning; bis buffering; and DECNET-11M optimization - performance that can be expected for real environments.

  11. Engineered Barrier System performance requirements systems study report. Revision 02

    SciTech Connect

    Balady, M.A.

    1997-01-14

    This study evaluates the current design concept for the Engineered Barrier System (EBS), in concert with the current understanding of the geologic setting to assess whether enhancements to the required performance of the EBS are necessary. The performance assessment calculations are performed by coupling the EBS with the geologic setting based on the models (some of which were updated for this study) and assumptions used for the 1995 Total System Performance Assessment (TSPA). The need for enhancements is determined by comparing the performance assessment results against the EBS related performance requirements. Subsystem quantitative performance requirements related to the EBS include the requirement to allow no more than 1% of the waste packages (WPs) to fail before 1,000 years after permanent closure of the repository, as well as a requirement to control the release rate of radionuclides from the EBS. The EBS performance enhancements considered included additional engineered components as well as evaluating additional performance available from existing design features but for which no performance credit is currently being taken.

  12. Modeling Topaz-II system performance

    SciTech Connect

    Lee, H.H.; Klein, A.C. )

    1993-01-01

    The US acquisition of the Topaz-11 in-core thermionic space reactor test system from Russia provides a good opportunity to perform a comparison of the Russian reported data and the results from computer codes such as MCNP (Ref. 3) and TFEHX (Ref. 4). The comparison study includes both neutronic and thermionic performance analyses. The Topaz II thermionic reactor is modeled with MCNP using actual Russian dimensions and parameters. The computation of the neutronic performance considers several important aspects such as the fuel enrichment and location of the thermionic fuel elements (TFES) in the reactor core. The neutronic analysis included the calculation of both radial and axial power distribution, which are then used in the TFEHX code for electrical performance. The reactor modeled consists of 37 single-cell TFEs distributed in a 13-cm-radius zirconium hydride block surrounded by 8 cm of beryllium metal reflector. The TFEs use 90% enriched [sup 235]U and molybdenum coated with a thin layer of [sup 184]W for emitter surface. Electrons emitted are captured by a collector surface with a gap filled with cesium vapor between the collector and emitter surfaces. The collector surface is electrically insulated with alumina. Liquid NaK provides the cooling system for the TFEs. The axial thermal power distribution is obtained by dividing the TFE into 40 axial nodes. Comparison of the true axial power distribution with that produced by electrical heaters was also performed.

  13. Verification System: First System-Wide Performance Test

    NASA Astrophysics Data System (ADS)

    Chernobay, I.; Zerbo, L.

    2006-05-01

    System-wide performance tests are essential for the development, testing and evaluation of individual components of the verification system. In addition to evaluating global readiness it helps establishing the practical and financial requirements for eventual operations. The first system-wide performance test (SPT1) was conducted in three phases: - A preparatory phase in May-June 2004 - A performance testing phase in April-June 2005 - An evaluation phase in the last half of 2005. The preparatory phase was developmental in nature. The main objectives for the performance testing phase included establishment of performance baseline under current provisional mode of operation (CTBT/PC- 19/1/Annex II, CTBT/WGB-21/1), examination of established requirements and procedures for operation and maintenance. To establish a system-wide performance baseline the system configuration was fixed for April-May 2005. The third month (June 2005) was used for implementation of 21 test case scenarios to examine either particular operational procedures or the response of the system components to the failures simulated under controlled conditions. A total of 163 stations and 5 certified radionuclide laboratories of International Monitoring System (IMS) participated in the performance testing phase - about 50% of the eventual IMS network. 156 IMS facilities and 40 National Data Centres (NDCs) were connected to the International Data Centre (IDC) via Global Communication Infrastructure (GCI) communication links. In addition, 12 legacy stations in the auxiliary seismic network sent data to the IDC over the Internet. During the performance testing phase, the IDC produced all required products, analysed more than 6100 seismic events and 1700 radionuclide spectra. Performance of all system elements was documented and analysed. IDC products were compared with results of data processing at the NDCs. On the basis of statistics and information collected during the SPT1 a system-wide performance

  14. Computer-controlled endoscopic performance assessment system.

    PubMed

    Hanna, G B; Drew, T; Clinch, P; Hunter, B; Cuschieri, A

    1998-07-01

    We have devised an advanced computer-controlled system (ADEPT) for the objective evaluation of endoscopic task performance. The system's hardware consists of a dual gimbal mechanism that accepts a variety of 5.0-mm standard endoscopic instruments for manipulation in a precisely mapped and enclosed work space. The target object consists of a sprung base plate incorporating various tasks. It is covered by a sprung perforated transparent top plate that has to be moved and held in the correct position by the operator to gain access to the various tasks. Standard video endoscope equipment provides the visual interface between the operator and the target-instrument field. Different target modules can be used, and the level of task difficulty can be adjusted by varying the manipulation, elevation, and azimuth angles. The system's software is designed to (a) prompt the surgeon with the information necessary to perform the task, (b) collect and collate data on performance during execution of specified tasks, and (c) save the data for future analysis. The system was alpha and beta tested to ensure that all functions operated correctly. PMID:9632879

  15. Annual Cycle Energy System characteristics and performance

    SciTech Connect

    Abbatiello, L.A.

    1980-01-01

    The Annual Cycle Energy System (ACES) provides space heating, air conditioning, and domestic water heating while using substantially less energy than competing systems providing the same services. The ACES is based on an electrically driven, unidirectional heat pump that extracts heat from an insulated tank of water during the heating season. As the heat is extracted, most of the water freezes, and the stored ice provides air conditioning in the summer. A single-family residence near Knoxville, Tennessee is being used to demonstrate the energy conserving features of the ACES. A second similar house, the control house, has been used to compare the performance of the ACES to both an electric resistance heating and hot water with central air conditioning system and an air-to-air heat pump system. The results of the first year's operation from November 1977 through mid-September 1978 showed that the ACES consumed 9012 kWh of electricity while delivering an annual coefficient of performance (COP) of 2.78. The control house consumed 20,523 kWh of electricity while delivering an annual COP of 1.13. The second annual cycle was started on December 1978. The ACES was compared with an air-to-air heat pump during this period. During the ice storage portion of this test year, December 1, 1978 to September 1, 1979, 5705 kWh of electricity was used by the ACES, compared to 12,014 kWh for the control house. The respective COPs are 1.40 for the control house with the heat pump and 2.99 for the ACES house during this period. Annual energy consumption for the test year was 6597 kWh and the annual COPs were 1.41 for the control house and 2.81 for ACES. ACES is achieving its anticipated performance. The ACES concept and its general engineering performance as compared to conventional HVAC system are described and discussed.

  16. Flexibility and Performance of Parallel File Systems

    NASA Technical Reports Server (NTRS)

    Kotz, David; Nieuwejaar, Nils

    1996-01-01

    As we gain experience with parallel file systems, it becomes increasingly clear that a single solution does not suit all applications. For example, it appears to be impossible to find a single appropriate interface, caching policy, file structure, or disk-management strategy. Furthermore, the proliferation of file-system interfaces and abstractions make applications difficult to port. We propose that the traditional functionality of parallel file systems be separated into two components: a fixed core that is standard on all platforms, encapsulating only primitive abstractions and interfaces, and a set of high-level libraries to provide a variety of abstractions and application-programmer interfaces (API's). We present our current and next-generation file systems as examples of this structure. Their features, such as a three-dimensional file structure, strided read and write interfaces, and I/O-node programs, are specifically designed with the flexibility and performance necessary to support a wide range of applications.

  17. A performance evaluation system for photomultiplier tubes

    NASA Astrophysics Data System (ADS)

    Xia, J.; Qian, S.; Wang, W.; Ning, Z.; Cheng, Y.; Wang, Z.; Li, X.; Qi, M.; Heng, Y.; Liu, S.; Lei, X.

    2015-03-01

    A comprehensive performance evaluation system for Photomultiplier tubes has been built up. The system is able to review diverse cathode and anode properties for PMTs with different sizes and dimensions. Relative and direct methods were developed for the quantum efficiency measurement and the results are consistent with each other. Two-dimensional and three-dimensional scanning platforms were built to test both the cathode and anode uniformity for either the plane type or spherical type photocathode. A Flash Analog-to-Digital Convertor module is utilized to achieve high speed waveforms sampling. The entire system is highly automatic and flexible. Details of the system and some typical experimental results are presented in this paper.

  18. Automated data entry system: performance issues

    NASA Astrophysics Data System (ADS)

    Thoma, George R.; Ford, Glenn

    2001-12-01

    This paper discusses the performance of a system for extracting bibliographic fields from scanned pages in biomedical journals to populate MEDLINE, the flagship database of the national Library of Medicine (NLM), and heavily used worldwide. This system consists of automated processes to extract the article title, author names, affiliations and abstract, and manual workstations for the entry of other required fields such as pagination, grant support information, databank accession numbers and others needed for a completed bibliographic record in MEDLINE. Labor and time data are given for (1) a wholly manual keyboarding process to create the records, (2) an OCR-based system that requires all fields except the abstract to be manually input, and (3) a more automated system that relies on document image analysis and understanding techniques for the extraction of several fields. It is shown that this last, most automated, approach requires less than 25% of the labor effort in the first, manual, process.

  19. Optimizing Hydronic System Performance in Residential Applications

    SciTech Connect

    Arena, L.; Faakye, O.

    2013-10-01

    Even though new homes constructed with hydronic heat comprise only 3% of the market (US Census Bureau 2009), of the 115 million existing homes in the United States, almost 14 million of those homes (11%) are heated with steam or hot water systems according to 2009 US Census data. Therefore, improvements in hydronic system performance could result in significant energy savings in the US. When operating properly, the combination of a gas-fired condensing boiler with baseboard convectors and an indirect water heater is a viable option for high-efficiency residential space heating in cold climates. Based on previous research efforts, however, it is apparent that these types of systems are typically not designed and installed to achieve maximum efficiency. Furthermore, guidance on proper design and commissioning for heating contractors and energy consultants is hard to find and is not comprehensive. Through modeling and monitoring, CARB sought to determine the optimal combination(s) of components - pumps, high efficiency heat sources, plumbing configurations and controls - that result in the highest overall efficiency for a hydronic system when baseboard convectors are used as the heat emitter. The impact of variable-speed pumps on energy use and system performance was also investigated along with the effects of various control strategies and the introduction of thermal mass.

  20. Analysis of imaging system performance capabilities

    NASA Astrophysics Data System (ADS)

    Haim, Harel; Marom, Emanuel

    2013-06-01

    Present performance analysis of optical imaging systems based on results obtained with classic one-dimensional (1D) resolution targets (such as the USAF resolution chart) are significantly different than those obtained with a newly proposed 2D target [1]. We hereby prove such claim and show how the novel 2D target should be used for correct characterization of optical imaging systems in terms of resolution and contrast. We apply thereafter the consequences of these observations on the optimal design of some two-dimensional barcode structures.

  1. RHIC BPM SYSTEM PERFORMANCE, UPGRADES, AND TOOLS.

    SciTech Connect

    SATOGATA,T.; CAMERON,P.; CERNIGLIA,P.; CUPOLO,J.; DAWSON,C.; DEGEN,C.; MEAD,J.; PTITSYN,V.; SIKORA,R.

    2002-06-02

    During the RHIC 2001-2 run, the beam position monitor (BPM) system provided independent average orbit and turn-by-turn (TBT) position measurements at 162 locations in each measurement plane and RHIC ring. TBT acquisition was successfully upgraded from 128 turns to 1024 turns per trigger, including injection. Closed orbits were acquired and automatically archived every two seconds through each acceleration ramp for orbit analysis and feed-forward orbit correction. This paper presents the overall system performance during this run, including precision, reproducibility, radiation damage, and analysis tools. We also summarize future plans, including million-turn TBT acquisition for nonlinear dynamics studies.

  2. Light Machines Operator Performance Support System

    SciTech Connect

    Bohley, M.C.

    1998-06-15

    The objective of this project was to create a multimedia operator performance support system (OPSS) shell that would provide a framework for delivering appropriate information to the student/novice machine tool user just when needed and in the most appropriate form. In addition, the program was designed so that it could be expanded and further developed by Light Machines personnel. The expertise of AlliedSignal Federal Manufacturing and Technologies (ASFM and T) in the areas of performance support system design and multimedia creation was employed to create the most user-friendly graphical user interface (GUI) while providing access to key topical areas. Light Machines provided a subject matter expert from their technical services group in order to provide the needed information for structuring the OPSS shell. They also provided a Benchman VMC 4000 machine tool at the ASFM and T New Mexico location as well as specific instruction on the safe and effective use of that machine tool.

  3. Performance evaluation of two OCR systems

    SciTech Connect

    Chen, S.; Subramaniam, S.; Haralick, R.M.; Phillips, I.T.

    1994-12-31

    An experimental protocol for the performance evaluation of Optical Character Recognition (OCR) algorithms is described. The protocol is intended to serve as a model for using the University of Washington English Document Image Database-I to evaluate OCR systems. The plain text zones (without special symbols) in this database have over 2,300,000 characters. The performances of two UNIX-based OCR systems, namely Caere OCR v109a and Xerox ScanWorX v2.0, are measured. The results suggest that Caere OCR outperforms ScanWorX in terms of recognition accuracy; however, ScanWorX is more robust in the presence of image flaws.

  4. RHIC BPM SYSTEM MODIFICATIONS AND PERFORMANCE.

    SciTech Connect

    SATOGATA, T.; CALAGA, R.; CAMERON, P.; ET AL.

    2005-05-16

    The RHIC beam position monitor (BPM) system provides independent average orbit and turn-by-turn (TBT) position measurements. In each ring, there are 162 measurement locations per plane (horizontal and vertical) for a total of 648 BPM planes in the RHIC machine. During 2003 and 2004 shutdowns, BPM processing electronics were moved from the RHIC tunnel to controls alcoves to reduce radiation impact, and the analog signal paths of several dozen modules were modified to eliminate gain-switching relays and improve signal stability. This paper presents results of improved system performance, including stability for interaction region beam-based alignment efforts. We also summarize performance of recently-added DSP profile scan capability, and improved million-turn TBT acquisition channels for 10 Hz triplet vibration, nonlinear dynamics, and echo studies.

  5. Are PPS payments adequate? Issues for updating and assessing rates

    PubMed Central

    Sheingold, Steven H.; Richter, Elizabeth

    1992-01-01

    Declining operating margins under Medicare's prospective payment system (PPS) have focused attention on the adequacy of payment rates. The question of whether annual updates to the rates have been too low or cost increases too high has become important. In this article we discuss issues relevant to updating PPS rates and judging their adequacy. We describe a modification to the current framework for recommending annual update factors. This framework is then used to retrospectively assess PPS payment and cost growth since 1985. The preliminary results suggest that current rates are more than adequate to support the cost of efficient care. Also discussed are why using financial margins to evaluate rates is problematic and alternative methods that might be employed. PMID:10127450

  6. Flight test of takeoff performance monitoring system

    NASA Technical Reports Server (NTRS)

    Middleton, David B.; Srivatsan, Raghavachari; Person, Lee H., Jr.

    1994-01-01

    The Takeoff Performance Monitoring System (TOPMS) is a computer software and hardware graphics system that visually displays current runway position, acceleration performance, engine status, and other situation advisory information to aid pilots in their decision to continue or to abort a takeoff. The system was developed at the Langley Research Center using the fixed-base Transport Systems Research Vehicle (TSRV) simulator. (The TSRV is a highly modified Boeing 737-100 research airplane.) Several versions of the TOPMS displays were evaluated on the TSRV B-737 simulator by more than 40 research, United States Air Force, airline and industry and pilots who rated the system satisfactory and recommended further development and testing. In this study, the TOPMS was flight tested on the TSRV. A total of 55 takeoff and 30 abort situations were investigated at 5 airfields. TOPMS displays were observed on the navigation display screen in the TSRV research flight deck during various nominal and off-nominal situations, including normal takeoffs; reduced-throttle takeoffs; induced-acceleration deficiencies; simulated-engine failures; and several gross-weight, runway-geometry, runway-surface, and ambient conditions. All tests were performed on dry runways. The TOPMS software executed accurately during the flight tests and the displays correctly depicted the various test conditions. Evaluation pilots found the displays easy to monitor and understand. The algorithm provides pretakeoff predictions of the nominal distances that are needed to accelerate the airplane to takeoff speed and to brake it to a stop; these predictions agreed reasonably well with corresponding values measured during several fully executed and aborted takeoffs. The TOPMS is operational and has been retained on the TSRV for general use and demonstration.

  7. ENSURING ADEQUATE SAFETY WHEN USING HYDROGEN AS A FUEL

    SciTech Connect

    Coutts, D

    2007-01-22

    Demonstration projects using hydrogen as a fuel are becoming very common. Often these projects rely on project-specific risk evaluations to support project safety decisions. This is necessary because regulations, codes, and standards (hereafter referred to as standards) are just being developed. This paper will review some of the approaches being used in these evolving standards, and techniques which demonstration projects can implement to bridge the gap between current requirements and stakeholder desires. Many of the evolving standards for hydrogen-fuel use performance-based language, which establishes minimum performance and safety objectives, as compared with prescriptive-based language that prescribes specific design solutions. This is being done for several reasons including: (1) concern that establishing specific design solutions too early will stifle invention, (2) sparse performance data necessary to support selection of design approaches, and (3) a risk-adverse public which is unwilling to accept losses that were incurred in developing previous prescriptive design standards. The evolving standards often contain words such as: ''The manufacturer shall implement the measures and provide the information necessary to minimize the risk of endangering a person's safety or health''. This typically implies that the manufacturer or project manager must produce and document an acceptable level of risk. If accomplished using comprehensive and systematic process the demonstration project risk assessment can ease the transition to widespread commercialization. An approach to adequately evaluate and document the safety risk will be presented.

  8. Acoustical pipe lagging systems design and performance

    SciTech Connect

    Stevens, R.D.; Chapnik, B.V.; Howe, B.

    1998-10-30

    HGC Engineering was retained by the PRC International at the American Gas Association, to undertake a study of acoustical pipe lagging systems. The study included gathering input from PRCI member companies regarding their concerns and their established material specifications for lagging systems; conducting a comprehensive acoustical measurement program; using the measured results in conjunction with computer modeling to identify optimal lagging configurations; and developing material specifications for several standardized lagging systems for use by PRCI member companies. For all the lagging configurations, the measurement and modeling results showed amplification of sound at frequencies less than about 315 Hz. This result is a well known phenomenon, widely discussed the published acoustical literature, which means that pipe lagging is only effective for controlling higher frequencies noise (above about 500 Hz). Fortunately, in many gas piping applications, it is this higher frequency range that is of concern. The measurement and modeling results further showed that the high frequency performance of a lagging system is dependent primarily on having sufficient jacket mass and insulation thickness. The performance can be improved using an intermediate mass loaded barrier layer.

  9. Benchmarking the performance of fixed-image receptor digital radiography systems. Part 2: system performance metric.

    PubMed

    Lee, Kam L; Bernardo, Michael; Ireland, Timothy A

    2016-06-01

    This is part two of a two-part study in benchmarking system performance of fixed digital radiographic systems. The study compares the system performance of seven fixed digital radiography systems based on quantitative metrics like modulation transfer function (sMTF), normalised noise power spectrum (sNNPS), detective quantum efficiency (sDQE) and entrance surface air kerma (ESAK). It was found that the most efficient image receptors (greatest sDQE) were not necessarily operating at the lowest ESAK. In part one of this study, sMTF is shown to depend on system configuration while sNNPS is shown to be relatively consistent across systems. Systems are ranked on their signal-to-noise ratio efficiency (sDQE) and their ESAK. Systems using the same equipment configuration do not necessarily have the same system performance. This implies radiographic practice at the site will have an impact on the overall system performance. In general, systems are more dose efficient at low dose settings. PMID:27222199

  10. Performance TTradeoffs in Distributed Control Systems

    NASA Astrophysics Data System (ADS)

    Borowski, Holly

    Large scale systems consisting of many interacting subsystems are often controlled in a distributed fashion due to inherent limitations in computation, communication, or sensing. Here, individual agents must make decisions based on local, often incomplete information. This dissertation focuses on understanding performance tradeoffs in distributed control systems, specifically focusing on using a game theoretic framework to assign agent control laws. Performance of a distributed control law is determined by (1) the degree with which it meets a stated objective, (2) the amount of time it takes to converge, (3) agents' informational requirements, and (4) vulnerability to adversarial manipulation. The three main research questions addressed in this work are: • When is fast convergence to near-optimal behavior possible in a distributed system? We design a distributed control law which converges to a near-optimal configuration in a time that is near-linear in the number of agents. This worst case convergence time is an improvement over existing algorithms whose worst-case convergence times are exponential in the number of agents. • Can agents in a distributed system learn near-optimal correlated behavior despite severely limited information about one another's behavior? We design a distributed control law that imposes limited informational requirements for individual agents and converges to near-optimal correlated behavior. • How does the structure of agent interaction impact a distributed control system's vulnerability to adversarial manipulation? We derive a graph theoretical condition that ensures resilience to adversarial manipulation, and we examine the conditions under which an adversary can manipulate collective behavior in a distributed control system, simply by influencing small subsets of agents.

  11. System performance predictions for Space Station Freedom's electric power system

    NASA Technical Reports Server (NTRS)

    Kerslake, Thomas W.; Hojnicki, Jeffrey S.; Green, Robert D.; Follo, Jeffrey C.

    1993-01-01

    Space Station Freedom Electric Power System (EPS) capability to effectively deliver power to housekeeping and user loads continues to strongly influence Freedom's design and planned approaches for assembly and operations. The EPS design consists of silicon photovoltaic (PV) arrays, nickel-hydrogen batteries, and direct current power management and distribution hardware and cabling. To properly characterize the inherent EPS design capability, detailed system performance analyses must be performed for early stages as well as for the fully assembled station up to 15 years after beginning of life. Such analyses were repeatedly performed using the FORTRAN code SPACE (Station Power Analysis for Capability Evaluation) developed at the NASA Lewis Research Center over a 10-year period. SPACE combines orbital mechanics routines, station orientation/pointing routines, PV array and battery performance models, and a distribution system load-flow analysis to predict EPS performance. Time-dependent, performance degradation, low earth orbit environmental interactions, and EPS architecture build-up are incorporated in SPACE. Results from two typical SPACE analytical cases are presented: (1) an electric load driven case and (2) a maximum EPS capability case.

  12. Human performance modeling for system of systems analytics :soldier fatigue.

    SciTech Connect

    Lawton, Craig R.; Campbell, James E.; Miller, Dwight Peter

    2005-10-01

    The military has identified Human Performance Modeling (HPM) as a significant requirement and challenge of future systems modeling and analysis initiatives as can be seen in the Department of Defense's (DoD) Defense Modeling and Simulation Office's (DMSO) Master Plan (DoD 5000.59-P 1995). To this goal, the military is currently spending millions of dollars on programs devoted to HPM in various military contexts. Examples include the Human Performance Modeling Integration (HPMI) program within the Air Force Research Laboratory, which focuses on integrating HPMs with constructive models of systems (e.g. cockpit simulations) and the Navy's Human Performance Center (HPC) established in September 2003. Nearly all of these initiatives focus on the interface between humans and a single system. This is insufficient in the era of highly complex network centric SoS. This report presents research and development in the area of HPM in a system-of-systems (SoS). Specifically, this report addresses modeling soldier fatigue and the potential impacts soldier fatigue can have on SoS performance.

  13. Maintaining Adequate CO2 Washout for an Advanced EMU via a New Rapid Cycle Amine Technology

    NASA Technical Reports Server (NTRS)

    Chullen, Cinda; Conger, Bruce

    2012-01-01

    Over the past several years, NASA has realized tremendous progress in Extravehicular Activity (EVA) technology development. This has been evidenced by the progressive development of a new Rapid Cycle Amine (RCA) system for the Advanced Extravehicular Mobility Unit (AEMU) Portable Life Support Subsystem (PLSS). The PLSS is responsible for the life support of the crew member in the spacesuit. The RCA technology is responsible for carbon dioxide (CO2) and humidity control. Another aspect of the RCA is that it is on-back vacuum-regenerable, efficient, and reliable. The RCA also simplifies the PLSS schematic by eliminating the need for a condensing heat exchanger for humidity control in the current EMU. As development progresses on the RCA, it is important that the sizing be optimized so that the demand on the PLSS battery is minimized. As well, maintaining the CO2 washout at adequate levels during an EVA is an absolute requirement of the RCA and associated ventilation system. Testing has been underway in-house at NASA Johnson Space Center and analysis has been initiated to evaluate whether the technology provides exemplary performance in ensuring that the CO2 is removed sufficiently and the ventilation flow is adequate for maintaining CO2 washout in the AEMU spacesuit helmet of the crew member during an EVA. This paper will review the recent developments of the RCA unit, testing planned in-house with a spacesuit simulator, and the associated analytical work along with insights from the medical aspect on the testing. 1

  14. Performance modeling for large database systems

    NASA Astrophysics Data System (ADS)

    Schaar, Stephen; Hum, Frank; Romano, Joe

    1997-02-01

    One of the unique approaches Science Applications International Corporation took to meet performance requirements was to start the modeling effort during the proposal phase of the Interstate Identification Index/Federal Bureau of Investigations (III/FBI) project. The III/FBI Performance Model uses analytical modeling techniques to represent the III/FBI system. Inputs to the model include workloads for each transaction type, record size for each record type, number of records for each file, hardware envelope characteristics, engineering margins and estimates for software instructions, memory, and I/O for each transaction type. The model uses queuing theory to calculate the average transaction queue length. The model calculates a response time and the resources needed for each transaction type. Outputs of the model include the total resources needed for the system, a hardware configuration, and projected inherent and operational availability. The III/FBI Performance Model is used to evaluate what-if scenarios and allows a rapid response to engineering change proposals and technical enhancements.

  15. Performance Charts for a Turbojet System

    NASA Technical Reports Server (NTRS)

    Karp, Irving M.

    1947-01-01

    Convenient charts are presented for computing the thrust, fuel consumption, and other performance values of a turbojet system. These charts take into account the effects of ram pressure, compressor pressure ratio, ratio of combustion-chamber-outlet temperature to atmospheric temperature, compressor efficiency, turbine efficiency, combustion efficiency, discharge-nozzle coefficient, losses in total pressure in the inlet to the jet-propulsion unit and in the combustion chamber, and variation in specific heats with temperature. The principal performance charts show clearly the effects of the primary variables and correction charts provide the effects of the secondary variables. The performance of illustrative cases of turbojet systems is given. It is shown that maximum thrust per unit mass rate of air flow occurs at a lower compressor pressure ratio than minimum specific fuel consumption. The thrust per unit mass rate of air flow increases as the combustion-chamber discharge temperature increases. For minimum specific fuel consumption, however, an optimum combustion-chamber discharge temperature exists, which in some cases may be less than the limiting temperature imposed by the strength temperature characteristics of present materials.

  16. Performance of a chill ATES system

    SciTech Connect

    Midkiff, K.C.; Song, Y.K.; Schaetzle, W.J.

    1989-03-01

    An aquifer air-conditioning system has been installed to cool the Student Recreation Center on the University of Alabama Campus. This research program encompasses the monitoring of the operation of the aquifer system and provision of emplacements to the system. The monitoring includes establishing the instrumentation, acquiring data, and analyzing the results. The instrumentation allows the measurement of water flow rates and corresponding temperatures, electrical energy input, aquifer temperatures at nineteen monitoring wells, and aquifer levels at six monitoring wells. Recent acquifer performance data indicate that 76% of the chill energy stored was recovered for the period Oct/86 - Sep/87 and 70% for the period Oct/87 - Sep/88. This is a substantial improvement over recoveries of 38% for the 1985 season and 55% for 1986. The overall coefficient of performance was 5.4 for Oct/86 - Sep/87 and 4.6 for Oct/87 - Sep/88. THe system has supplied 100% of the cooling with only about one-half of the energy input required by a conventional system. Some of the increased recovery of chilled water is a result of modifying the production well operation to reduce the regional flow of water toward the northwest. All warm water is withdrawn form the southeast wells, chilled, and injected in northwest wells. The cold water then withdrawn from the cold wells is used for air-conditioning but not reinjected into the aquifer. Additional flow control is provided by pumping (and discarding) water out of a southeast well, although the complete results of this new strategy are as yet unclear.

  17. Human performance modeling for system of systems analytics.

    SciTech Connect

    Dixon, Kevin R.; Lawton, Craig R.; Basilico, Justin Derrick; Longsine, Dennis E.; Forsythe, James Chris; Gauthier, John Henry; Le, Hai D.

    2008-10-01

    A Laboratory-Directed Research and Development project was initiated in 2005 to investigate Human Performance Modeling in a System of Systems analytic environment. SAND2006-6569 and SAND2006-7911 document interim results from this effort; this report documents the final results. The problem is difficult because of the number of humans involved in a System of Systems environment and the generally poorly defined nature of the tasks that each human must perform. A two-pronged strategy was followed: one prong was to develop human models using a probability-based method similar to that first developed for relatively well-understood probability based performance modeling; another prong was to investigate more state-of-art human cognition models. The probability-based modeling resulted in a comprehensive addition of human-modeling capability to the existing SoSAT computer program. The cognitive modeling resulted in an increased understanding of what is necessary to incorporate cognition-based models to a System of Systems analytic environment.

  18. Performance of Sequoyah Containment Anchorage System

    SciTech Connect

    Fanous, F.; Greimann, L.; Wassef, W.; Bluhm, D.

    1993-01-01

    Deformation of a steel containment anchorage system during a severe accident may result in a leakage path at the containment boundaries. Current design criteria are based on either ductile or brittle failure modes of headed bolts that do not account for factors such as cracking of the containment basemat or deformation of the anchor bolt that may affect the behavior of the containment anchorage system. The purpose of this study was to investigate the performance of a typical ice condenser containment`s anchorage system. This was accomplished by analyzing the Sequoyah Containment Anchorage System. Based on a strength of materials approach and assuming that the anchor bolts are resisting the uplift caused by the internal pressure, one can estimate that the failure of the anchor bolts would occur at a containment pressure of 79 psig. To verify these results and to calibrate the strength of materials equation, the Sequoyah containment anchorage system was analyzed with the ABAQUS program using a three-dimensional, finite-element model. The model included portions of the steel containment building, shield building, anchor bolt assembly, reinforced concrete mat and soil foundation material.

  19. Performance of the Galley Parallel File System

    NASA Technical Reports Server (NTRS)

    Nieuwejaar, Nils; Kotz, David

    1996-01-01

    As the input/output (I/O) needs of parallel scientific applications increase, file systems for multiprocessors are being designed to provide applications with parallel access to multiple disks. Many parallel file systems present applications with a conventional Unix-like interface that allows the application to access multiple disks transparently. This interface conceals the parallism within the file system, which increases the ease of programmability, but makes it difficult or impossible for sophisticated programmers and libraries to use knowledge about their I/O needs to exploit that parallelism. Furthermore, most current parallel file systems are optimized for a different workload than they are being asked to support. We introduce Galley, a new parallel file system that is intended to efficiently support realistic parallel workloads. Initial experiments, reported in this paper, indicate that Galley is capable of providing high-performance 1/O to applications the applications that rely on them. In Section 3 we describe that access data in patterns that have been observed to be common.

  20. Thermal Performance Testing of Cryogenic Insulation Systems

    NASA Technical Reports Server (NTRS)

    Fesmire, James E.; Augustynowicz, Stan D.; Scholtens, Brekke E.

    2007-01-01

    Efficient methods for characterizing thermal performance of materials under cryogenic and vacuum conditions have been developed. These methods provide thermal conductivity data on materials under actual-use conditions and are complementary to established methods. The actual-use environment of full temperature difference in combination with vacuum-pressure is essential for understanding insulation system performance. Test articles include solids, foams, powders, layered blankets, composite panels, and other materials. Test methodology and apparatus design for several insulation test cryostats are discussed. The measurement principle is liquid nitrogen boil-off calorimetry. Heat flux capability ranges from approximately 0.5 to 500 watts per square meter; corresponding apparent thermal conductivity values range from below 0.01 up to about 60 mW/m- K. Example data for different insulation materials are also presented. Upon further standardization work, these patented insulation test cryostats can be available to industry for a wide range of practical applications.

  1. Design and performances of JPCam actuator system

    NASA Astrophysics Data System (ADS)

    Casalta, Joan Manel; Canchado, Manuel; Molins, Albert; Redondo, Miguel; Tomàs, Albert; Catalan, Albert

    2014-07-01

    JPCam is designed to perform the Javalambre-PAU Astrophysical Survey (J-PAS), a photometric survey of the northern sky with the new JST telescope being constructed in the Observatorio Astrofísico of Javalambre in Spain by CEFCA (Centro de Estudios de Física del Cosmos de Aragón). SENER has been responsible for the design, manufacturing, verification and delivery of the JPCam Actuator System that will be installed between the Telescope and the cryogenic Camera Subsystem. The main function is to control the instrument position to guarantee the image quality required during observations in all field of view and compensate deformations produced by gravity and temperature changes. The paper summarizes the main aspects of the hexapod design and earliest information related of integration and performances tests results.

  2. Hydraulic systems performance of Army engine oils

    SciTech Connect

    Marbach, H.W.; Lestz, S.J.

    1984-01-01

    A technical evaluation of qualified military specification lubricants was started by the U.S. Army Belvoir Research and Development Center and was performed at the U.S. Army Fuels and Lubricants Research Laboratory (AFLRL) located at Southwest Research Institute. This work was conducted to determine if such lubricants can be used as hydraulic fluids in Army Commercial Construction Equipment (CCE) and Selected Material Handling Equipment (SMHE). Sixteen military specification lubricants were extensively evaluated using twelve selected tests required by equipment manufacturers and one test developed by AFLRL in conjunction with John Deere. From the data developed, lubricants meeting Army specifications passed 88 percent of all the tests. It appears that the Army engine oils are good potential candidates for use as hydraulic and power transmission lubricants within the Army CCE/SMHE systems. Areas of concern include copper corrosion, wet brake/clutch frictional performance, and final drive gear wear.

  3. Thermal control surfaces experiment flight system performance

    NASA Technical Reports Server (NTRS)

    Wilkes, Donald R.; Hummer, Leigh L.; Zwiener, James M.

    1991-01-01

    The Thermal Control Surfaces Experiment (TCSE) is the most complex system, other than the LDEF, retrieved after long term space exposure. The TCSE is a microcosm of complex electro-optical payloads being developed and flow by NASA and the DoD including SDI. The objective of TCSE was to determine the effects of the near-Earth orbital environment and the LDEF induced environment on spacecraft thermal control surfaces. The TCSE was a comprehensive experiment that combined in-space measurements with extensive post flight analyses of thermal control surfaces to determine the effects of exposure to the low earth orbit space environment. The TCSE was the first space experiment to measure the optical properties of thermal control surfaces the way they are routinely measured in a lab. The performance of the TCSE confirms that low cost, complex experiment packages can be developed that perform well in space.

  4. Performance tuned radioisotope thermophotovoltaic space power system

    NASA Astrophysics Data System (ADS)

    Horne, W. E.; Morgan, M. D.; Saban, S. B.

    1998-01-01

    The trend in space exploration is to use many small, low-cost, special-purpose satellites instead of the large, high-cost, multipurpose satellites used in the past. As a result of this new trend, there is a need for lightweight, efficient, and compact radioisotope fueled electrical power generators. This paper presents an improved design for a radioisotope thermophotovoltaic (RTPV) space power system in the 10 W to 20 W class which promises up to 37.6 watts at 30.1% efficiency and 25 W/kg specific power. The RTPV power system concept has been studied and compared to radioisotope thermoelectric generators (RTG) radioisotope, Stirling generators and alkali metal thermal electric conversion (AMTEC) generators (Schock, 1995). The studies indicate that RTPV has the potential to be the lightest weight, most efficient and most reliable of the three concepts. However, in spite of the efficiency and light weight, the size of the thermal radiator required to eliminate excess heat from the PV cells and the lack of actual system operational performance data are perceived as obstacles to RTPV acceptance for space applications. Between 1994 and 1997 EDTEK optimized the key converter components for an RTPV generator under Department of Energy (DOE) funding administered via subcontracts to Orbital Sciences Corporation (OSC) and EG&G Mound Applied Technologies Laboratory (Horne, 1995). The optimized components included a resonant micromesh infrared bandpass filter, low-bandgap GaSb PV cells and cell arrays. Parametric data from these components were supplied to OSC who developed and analyzed the performance of 100 W, 20 W, and 10 W RTPV generators. These designs are described in references (Schock 1994, 1995 and 1996). Since the performance of each class of supply was roughly equivalent and simply scaled with size, this paper will consider the OSC 20 W design as a baseline. The baseline 20-W RTPV design was developed by Schock, et al of OSC and has been presented elsewhere. The

  5. Maintaining Adequate CO2 Washout for an Advanced EMU via a New Rapid Cycle Amine Technology

    NASA Technical Reports Server (NTRS)

    Chullen, Cinda

    2011-01-01

    Over the past several years, NASA has realized tremendous progress in Extravehicular Activity (EVA) technology development. This has been evidenced by the progressive development of a new Rapic Cycle Amine (RCA) system for the Advanced Extravehicular Mobility Unit (AEMU) Portable Life Support Subsystem (PLSS). The PLSS is responsible for the life support of the crew member in the spacesuit. The RCA technology is responsible for carbon dioxide (CO2) and humidity control. Another aspect of the RCA is that it is on-back vacuum-regenerable, efficient, and reliable. The RCA also simplifies the PLSS schematic by eliminating the need for a condensing heat exchanger for humidity control in the current EMU. As development progresses on the RCA, it is important that the sizing be optimized so that the demand on the PLSS battery is minimized. As well, maintaining the CO2 washout at adequate levels during an EVA is an absolute requirement of the RCA and associated ventilation system. Testing has been underway in-house at NASA Johnson Space Center and analysis has been initiated to evaluate whether the technology provides exemplary performance in ensuring that the CO2 is removed sufficiently enough and the ventilation flow is adequate enough to maintain CO2 1 Project Engineer, Space Suit and Crew Survival Systems Branch, Crew and Thermal Systems Division, 2101 NASA Parkway, Houston, TX 77058/EC5. washout in the AEMU spacesuit helmet of the crew member during an EVA. This paper will review the recent developments of the RCA unit, the testing results performed in-house with a spacesuit simulator, and the associated analytical work along with insights from the medical aspect on the testing.

  6. Performance of the upgraded Orroral laser ranging system

    NASA Technical Reports Server (NTRS)

    Luck, John M.

    1993-01-01

    The topics discussed include the following: upgrade arrangements, system prior to 1991, elements of the upgrade, laser performance, timing system performance, pass productivity, system precision, system accuracy, telescope pointing and future upgrades and extensions.

  7. Arabidopsis: an adequate model for dicot root systems?

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In the search for answers to pressing root developmental genetic issues, plant science has turned to a small genome dicot plant (Arabidopsis) to be used as a model to study and use to develop hypotheses for testing other species. Through out the published research only three classes of root are des...

  8. Maintenance of an Adequate Dental Hygiene Education System.

    ERIC Educational Resources Information Center

    Ley, Eugene; And Others

    1984-01-01

    Administrative decisions about the future of dental hygiene programs are often based on inadequate information about employment trends and about the importance of the dental hygienist in dental practices. Studies indicate that demand for dental hygiene services will remain high in the 1980s. (Author/MLW)

  9. Thermal Performance of Vegetative Roofing Systems

    SciTech Connect

    Desjarlais, Andre Omer; Zaltash, Abdolreza; Atchley, Jerald Allen; Ennis, Mike J

    2010-01-01

    Vegetative roofing, otherwise known as green or garden roofing, has seen tremendous growth in the last decade in the United States. The numerous benefits that green roofs provide have helped to fuel their resurgence in industrial and urban settings. There are many environmental and economical benefits that can be realized by incorporating a vegetative roof into the design of a building. These include storm-water retention, energy conservation, reduction in the urban heat island effect, increased longevity of the roofing membrane, the ability of plants to create biodiversity and filter air contaminants, and beautification of the surroundings by incorporating green space. The vegetative roof research project at Oak Ridge National Laboratory (ORNL) was initiated to quantify the thermal performance of various vegetative roofing systems relative to black and white roofs. Single Ply Roofing Institute (SPRI) continued its long-term commitment to cooperative research with ORNL in this project. Low-slope roof systems for this study were constructed and instrumented for continuous monitoring in the mixed climate of East Tennessee. This report summarizes the results of the annual cooling and heating loads per unit area of three vegetative roofing systems with side-by-side comparison to black and white roofing systems as well as a test section with just the growing media without plants. Results showed vegetative roofs reduced heat gain (reduced cooling loads) compared to the white control system due to the thermal mass, extra insulation, and evapo-transpiration associated with the vegetative roofing systems. The 4-inch and tray systems reduced the heat gain by approximately 61%, while the reduction with the 8-inch vegetative roof was found to be approximately 67%. The vegetative roofing systems were more effective in reducing heat gain than in reducing heat losses (heating loads). The reduction in heat losses for the 4-inch and tray systems were found to be approximately 40

  10. 7 CFR 4290.200 - Adequate capital for RBICs.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 15 2011-01-01 2011-01-01 false Adequate capital for RBICs. 4290.200 Section 4290.200 Agriculture Regulations of the Department of Agriculture (Continued) RURAL BUSINESS-COOPERATIVE SERVICE AND... Qualifications for the RBIC Program Capitalizing A Rbic § 4290.200 Adequate capital for RBICs. You must meet...

  11. 13 CFR 107.200 - Adequate capital for Licensees.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false Adequate capital for Licensees... INVESTMENT COMPANIES Qualifying for an SBIC License Capitalizing An Sbic § 107.200 Adequate capital for... Licensee, and to receive Leverage. (a) You must have enough Regulatory Capital to provide...

  12. 13 CFR 107.200 - Adequate capital for Licensees.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Adequate capital for Licensees... INVESTMENT COMPANIES Qualifying for an SBIC License Capitalizing An Sbic § 107.200 Adequate capital for... Licensee, and to receive Leverage. (a) You must have enough Regulatory Capital to provide...

  13. 7 CFR 4290.200 - Adequate capital for RBICs.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Adequate capital for RBICs. 4290.200 Section 4290.200 Agriculture Regulations of the Department of Agriculture (Continued) RURAL BUSINESS-COOPERATIVE SERVICE AND... Qualifications for the RBIC Program Capitalizing A Rbic § 4290.200 Adequate capital for RBICs. You must meet...

  14. 10 CFR 1304.114 - Responsibility for maintaining adequate safeguards.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Responsibility for maintaining adequate safeguards. 1304.114 Section 1304.114 Energy NUCLEAR WASTE TECHNICAL REVIEW BOARD PRIVACY ACT OF 1974 § 1304.114 Responsibility for maintaining adequate safeguards. The Board has the responsibility for maintaining...

  15. 40 CFR 716.25 - Adequate file search.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Adequate file search. 716.25 Section 716.25 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT HEALTH AND SAFETY DATA REPORTING General Provisions § 716.25 Adequate file search. The scope of...

  16. 40 CFR 716.25 - Adequate file search.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Adequate file search. 716.25 Section... ACT HEALTH AND SAFETY DATA REPORTING General Provisions § 716.25 Adequate file search. The scope of a person's responsibility to search records is limited to records in the location(s) where the...

  17. 40 CFR 716.25 - Adequate file search.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Adequate file search. 716.25 Section... ACT HEALTH AND SAFETY DATA REPORTING General Provisions § 716.25 Adequate file search. The scope of a person's responsibility to search records is limited to records in the location(s) where the...

  18. 40 CFR 716.25 - Adequate file search.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Adequate file search. 716.25 Section... ACT HEALTH AND SAFETY DATA REPORTING General Provisions § 716.25 Adequate file search. The scope of a person's responsibility to search records is limited to records in the location(s) where the...

  19. 40 CFR 716.25 - Adequate file search.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Adequate file search. 716.25 Section... ACT HEALTH AND SAFETY DATA REPORTING General Provisions § 716.25 Adequate file search. The scope of a person's responsibility to search records is limited to records in the location(s) where the...

  20. 10 CFR 1304.114 - Responsibility for maintaining adequate safeguards.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Responsibility for maintaining adequate safeguards. 1304.114 Section 1304.114 Energy NUCLEAR WASTE TECHNICAL REVIEW BOARD PRIVACY ACT OF 1974 § 1304.114 Responsibility for maintaining adequate safeguards. The Board has the responsibility for maintaining...

  1. 10 CFR 1304.114 - Responsibility for maintaining adequate safeguards.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Responsibility for maintaining adequate safeguards. 1304.114 Section 1304.114 Energy NUCLEAR WASTE TECHNICAL REVIEW BOARD PRIVACY ACT OF 1974 § 1304.114 Responsibility for maintaining adequate safeguards. The Board has the responsibility for maintaining...

  2. 10 CFR 503.35 - Inability to obtain adequate capital.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Inability to obtain adequate capital. 503.35 Section 503.35 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS NEW FACILITIES Permanent Exemptions for New Facilities § 503.35 Inability to obtain adequate capital. (a) Eligibility. Section 212(a)(1)(D)...

  3. 10 CFR 503.35 - Inability to obtain adequate capital.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Inability to obtain adequate capital. 503.35 Section 503.35 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS NEW FACILITIES Permanent Exemptions for New Facilities § 503.35 Inability to obtain adequate capital. (a) Eligibility. Section 212(a)(1)(D)...

  4. 15 CFR 970.404 - Adequate exploration plan.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR EXPLORATION LICENSES Certification of Applications § 970.404 Adequate exploration plan. Before he may certify an application, the Administrator must find... 15 Commerce and Foreign Trade 3 2011-01-01 2011-01-01 false Adequate exploration plan....

  5. 15 CFR 970.404 - Adequate exploration plan.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR EXPLORATION LICENSES Certification of Applications § 970.404 Adequate exploration plan. Before he may certify an application, the Administrator must find... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Adequate exploration plan....

  6. "Something Adequate"? In Memoriam Seamus Heaney, Sister Quinlan, Nirbhaya

    ERIC Educational Resources Information Center

    Parker, Jan

    2014-01-01

    Seamus Heaney talked of poetry's responsibility to represent the "bloody miracle", the "terrible beauty" of atrocity; to create "something adequate". This article asks, what is adequate to the burning and eating of a nun and the murderous gang rape and evisceration of a medical student? It considers Njabulo…

  7. Thermal control surfaces experiment flight system performance

    NASA Technical Reports Server (NTRS)

    Wilkes, Donald R.; Hummer, Leigh L.; Zwiener, James M.

    1992-01-01

    The Thermal Control Surfaces Experiment (TCSE) is the most complex system retrieved after long term space exposure. The TCSE is a microcosm of complex electro-optical payloads being developed and flown. The objective of the TCSE on the LDEF was to determine the effects of the near-Earth orbital environment and the LDEF induced environment on spacecraft thermal control surfaces. The TCSE was a comprehensive experiment that combined in-space measurements with extensive post-flight analyses of thermal control surfaces to determine the effects of exposure to the low Earth orbit space environment. The TCSE was the first space experiment to measure the optical properties of thermal control surfaces the way they are routinely measured in the lab. The performance of the TCSE flight system on the LDEF was excellent.

  8. Performance Criteria of Nuclear Space Propulsion Systems

    NASA Astrophysics Data System (ADS)

    Shepherd, L. R.

    Future exploration of the solar system on a major scale will require propulsion systems capable of performance far greater than is achievable with the present generation of rocket engines using chemical propellants. Viable missions going deeper into interstellar space will be even more demanding. Propulsion systems based on nuclear energy sources, fission or (eventually) fusion offer the best prospect for meeting the requirements. The most obvious gain coming from the application of nuclear reactions is the possibility, at least in principle, of obtaining specific impulses a thousandfold greater than can be achieved in chemically energised rockets. However, practical considerations preclude the possibility of exploiting the full potential of nuclear energy sources in any engines conceivable in terms of presently known technology. Achievable propulsive power is a particularly limiting factor, since this determines the acceleration that may be obtained. Conventional chemical rocket engines have specific propulsive powers (power per unit engine mass) in the order of gigawatts per tonne. One cannot envisage the possibility of approaching such a level of performance by orders of magnitude in presently conceivable nuclear propulsive systems. The time taken, under power, to reach a given terminal velocity is proportional to the square of the engine's exhaust velocity and the inverse of its specific power. An assessment of various nuclear propulsion concepts suggests that, even with the most optimistic assumptions, it could take many hundreds of years to attain the velocities necessary to reach the nearest stars. Exploration within a range of the order of a thousand AU, however, would appear to offer viable prospects, even with the low levels of specific power of presently conceivable nuclear engines.

  9. Human performance modeling for system of systems analytics: combat performance-shaping factors.

    SciTech Connect

    Lawton, Craig R.; Miller, Dwight Peter

    2006-01-01

    The US military has identified Human Performance Modeling (HPM) as a significant requirement and challenge of future systems modeling and analysis initiatives. To support this goal, Sandia National Laboratories (SNL) has undertaken a program of HPM as an integral augmentation to its system-of-system (SoS) analytics capabilities. The previous effort, reported in SAND2005-6569, evaluated the effects of soldier cognitive fatigue on SoS performance. The current effort began with a very broad survey of any performance-shaping factors (PSFs) that also might affect soldiers performance in combat situations. The work included consideration of three different approaches to cognition modeling and how appropriate they would be for application to SoS analytics. This bulk of this report categorizes 47 PSFs into three groups (internal, external, and task-related) and provides brief descriptions of how each affects combat performance, according to the literature. The PSFs were then assembled into a matrix with 22 representative military tasks and assigned one of four levels of estimated negative impact on task performance, based on the literature. Blank versions of the matrix were then sent to two ex-military subject-matter experts to be filled out based on their personal experiences. Data analysis was performed to identify the consensus most influential PSFs. Results indicate that combat-related injury, cognitive fatigue, inadequate training, physical fatigue, thirst, stress, poor perceptual processing, and presence of chemical agents are among the PSFs with the most negative impact on combat performance.

  10. The Physics of transmutation systems : system capabilities and performances.

    SciTech Connect

    Finck, P. J.

    2002-08-21

    This document is complementary to a document produced by Prof. Salvatores on ''The Physics of Transmutation in Critical or Subcritical Reactors and the Impact on the Fuel Cycle''. In that document, Salvatores describes the fundamental of transmutation, through basic physics properties and general parametric studies. In the present document we try to go one step further towards practical implementation (while recognizing that the practical issues such as technology development and demonstration, and economics, can only be mentioned in a very superficial manner). Section 1 briefly overviews the possible objectives of transmutation systems, and links these different objectives to possible technological paths. It also describes the overall constraints which have to be considered when developing and implementing transmutation systems. In section 2 we briefly overview the technological constraints which need to be accounted for when designing transmutation systems. In section 3 we attempt to provide a simplified classification of transmutation systems in order to clarify later comparisons. It compares heterogeneous and homogeneous recycle strategies, and single and multi-tier systems. Section 4 presents case analyses for assessing the transmutation performance of various individual systems, starting with LWR's (1. generic results; 2. multirecycle of plutonium; 3. an alternative: transmutation based on a Thorium fuel cycle), followed by Gas-Cooled Reactors (with an emphasis on the ''deep burn'' approach), and followed by Fast Reactors and Accelerator Driven systems (1. generic results; 2. homogeneous recycle of transuranics; 3. practical limit between Fast Reactors and Accelerator Driven Systems) Section 5 summarizes recent results on integrated system performances. It focuses first on interface effects between the two elements of a dual tier system, and then summarizes the major lessons learned from recent global physics studies.

  11. Cellular Manufacturing Internet Performance Support System

    SciTech Connect

    Bohley, M.C.; Schwartz, M.E.

    1998-03-04

    The objective of this project was to develop an Internet-based electronic performance support system (EPSS) for cellular manufacturing providing hardware/software specifications, process descriptions, estimated cost savings, manufacturing simulations, training information, and service resources for government and industry users of Cincinnati Milacron machine tools and products. AlliedSignal Federal Manufacturing and Technologies (ASFM and T) used expertise in the areas of Internet design and multimedia creation to develop a performance support system (PSS) for the Internet with assistance from CM's subject matter experts from engineering, manufacturing, and technical support. Reference information was both created and re-purposed from other existing formats, then made available on the Internet. On-line references on cellular manufacturing operations include: definitions of cells and cellular manufacturing; illustrations on how cellular manufacturing improves part throughput, resource utilization, part quality, and manufacturing flexibility; illustrations on how cellular manufacturing reduces labor and overhead costs; identification of critical factors driving decisions toward cellular manufacturing; a method for identifying process improvement areas using cellular manufacturing; a method for customizing the size of cells for a specific site; a simulation for making a part using cellular manufacturing technology; and a glossary of terms and concepts.

  12. Performance Evaluation of Hyperspectral Chemical Detection Systems

    NASA Astrophysics Data System (ADS)

    Truslow, Eric

    Remote sensing of chemical vapor plumes is a difficult but important task with many military and civilian applications. Hyperspectral sensors operating in the long wave infrared (LWIR) regime have well demonstrated detection capabilities. However, the identification of a plume's chemical constituents, based on a chemical library, is a multiple hypothesis-testing problem that standard detection metrics do not fully describe. Our approach partitions and weights a confusion matrix to develop both the standard detection metrics and an identification metric based on the Dice index. Using the developed metrics, we demonstrate that using a detector bank followed by an identifier can achieve superior performance relative to either algorithm individually. Performance of the cascaded system relies on the first pass reliably detecting the plume. However, detection performance is severely hampered by the inclusion of plume pixels in estimates of background quantities. We demonstrate that this problem, known as contamination, can be mitigated by iteratively applying a spatial filter to the detected pixels. Multiple detection and filtering passes can remove nearly all contamination from the background estimates, a vast improvement over single-pass techniques.

  13. TRMM On Orbit Attitude Control System Performance

    NASA Technical Reports Server (NTRS)

    Robertson, Brent; Placanica, Sam; Morgenstern, Wendy

    1999-01-01

    This paper presents an overview of the Tropical Rainfall Measuring Mission (TRMM) Attitude Control System (ACS) along with detailed in-flight performance results for each operational mode. The TRMM spacecraft is an Earth-pointed, zero momentum bias satellite launched on November 27, 1997 from Tanegashima Space Center, Japan. TRMM is a joint mission between NASA and the National Space Development Agency (NASDA) of Japan designed to monitor and study tropical rainfall and the associated release of energy. Launched to provide a validation for poorly known rainfall data sets generated by global climate models, TRMM has demonstrated its utility by reducing uncertainties in global rainfall measurements by a factor of two. The ACS is comprised of Attitude Control Electronics (ACE), an Earth Sensor Assembly (ESA), Digital Sun Sensors (DSS), Inertial Reference Units (IRU), Three Axis Magnetometers (TAM), Coarse Sun Sensors (CSS), Magnetic Torquer Bars (MTB), Reaction Wheel Assemblies (RWA), Engine Valve Drivers (EVD) and thrusters. While in Mission Mode, the ESA provides roll and pitch axis attitude error measurements and the DSS provide yaw updates twice per orbit. In addition, the TAM in combination with the IRU and DSS can be used to provide pointing in a contingency attitude determination mode which does not rely on the ESA. Although the ACS performance to date has been highly successful, lessons were learned during checkout and initial on-orbit operation. This paper describes the design, on-orbit checkout, performance and lessons learned for the TRMM ACS.

  14. The grout/glass performance assessment code system (GPACS) with verification and benchmarking

    SciTech Connect

    Piepho, M.G.; Sutherland, W.H.; Rittmann, P.D.

    1994-12-01

    GPACS is a computer code system for calculating water flow (unsaturated or saturated), solute transport, and human doses due to the slow release of contaminants from a waste form (in particular grout or glass) through an engineered system and through a vadose zone to an aquifer, well and river. This dual-purpose document is intended to serve as a user`s guide and verification/benchmark document for the Grout/Glass Performance Assessment Code system (GPACS). GPACS can be used for low-level-waste (LLW) Glass Performance Assessment and many other applications including other low-level-waste performance assessments and risk assessments. Based on all the cses presented, GPACS is adequate (verified) for calculating water flow and contaminant transport in unsaturated-zone sediments and for calculating human doses via the groundwater pathway.

  15. Influence of Design Variations on Systems Performance

    NASA Technical Reports Server (NTRS)

    Tumer, Irem Y.; Stone, Robert B.; Huff, Edward M.; Norvig, Peter (Technical Monitor)

    2000-01-01

    High-risk aerospace components have to meet very stringent quality, performance, and safety requirements. Any source of variation is a concern, as it may result in scrap or rework. poor performance, and potentially unsafe flying conditions. The sources of variation during product development, including design, manufacturing, and assembly, and during operation are shown. Sources of static and dynamic variation during development need to be detected accurately in order to prevent failure when the components are placed in operation. The Systems' Health and Safety (SHAS) research at the NASA Ames Research Center addresses the problem of detecting and evaluating the statistical variation in helicopter transmissions. In this work, we focus on the variations caused by design, manufacturing, and assembly of these components, prior to being placed in operation (DMV). In particular, we aim to understand and represent the failure and variation information, and their correlation to performance and safety and feed this information back into the development cycle at an early stage. The feedback of such critical information will assure the development of more reliable components with less rework and scrap. Variations during design and manufacturing are a common source of concern in the development and production of such components. Accounting for these variations, especially those that have the potential to affect performance, is accomplished in a variety ways, including Taguchi methods, FMEA, quality control, statistical process control, and variation risk management. In this work, we start with the assumption that any of these variations can be represented mathematically, and accounted for by using analytical tools incorporating these mathematical representations. In this paper, we concentrate on variations that are introduced during design. Variations introduced during manufacturing are investigated in parallel work.

  16. PERFORMANCE OF THE DIII-D SYSTEM

    SciTech Connect

    CALLIS,RW; KAJIWARA,K; LOHR,J; GORELOV,YA; PONCE,D

    2003-08-01

    A271 PERFORMANCE OF THE DIII-D SYSTEM. Three 110 GHz gyrotrons with nominal output power of 1 MW each have been installed and are operational on the DIII-D tokamak. All three gyrotrons were built by Communications and Power Industries (CPI). The CPI gyrotrons utilize a single disc CVD (chemical-vapor-deposition) diamond window that employs water cooling around the edge of the disc. Calculations predict that the CVD diamond window should be capable of full 1 MW cw operation, which is supported by IR camera measurements that show the window reaching equilibrium after 2.5 s. All gyrotrons are connected to the tokamak by low-loss-windowless evacuated transmission line using circular corrugated waveguide for propagation in the HE{sub 11} mode. Each waveguide system incorporates a two-mirror launcher, which can steer the rf beam poloidally from the center to the outer edge of the plasma. Results obtained using the DIII-D ECH systems will be reported.

  17. Pleiades System Architecture and Main Performances

    NASA Astrophysics Data System (ADS)

    Gleyzes, M. A.; Perret, L.; Kubik, P.

    2012-07-01

    France, under the leadership of the French Space Agency (CNES), has set up a cooperative program with Austria, Belgium, Spain, Sweden, in order to develop a space Earth Observation system called PLEIADES. PLEIADES is a dual system, this means that it is intended to fulfill an extended panel of both civilian and Defense user's needs.. This paper reports the status of the satellite after its launch and the in orbit commissioning, the PLEIADES satellite first model has been launched at the end of year 2011, the second model will be launched about 12 months later. It describes the main mission characteristics and performances status. It exposes how the system, satellite and ground segment have been designed in order to be compliant with a dual exploitation between civilian and defense partners. The system is based on the use of a set of newly European developed technologies to feature the satellite. In order to maximize the agility of the satellite, weight and inertia have been reduced using a compact hexagonal shape for the satellite bus. The optical mission consists in Earth optical observation composed of 0.7 m nadir resolution for the panchromatic band and 2.8 m nadir resolution for the four multi-spectral bands. The image swath is about 20 km. PLEIADES delivers optical high resolution products consisting in a Panchromatic image, into which is merged a four multispectral bands image, orthorectified on a Digital Terrain Model (DTM). Thanks to the huge satellite agility obtained with control momentum gyros as actuators, the optical system delivers as well instantaneous stereo images, under different stereoscopic conditions and mosaic images, issued from along the track thus enlarging the field of view. The ground segment is composed of a dual ground center located in CNES Toulouse premises in charge of preparing the dual mission command plan and of the real time contacts with the satellite through a control center. The dual ground center interfaces with several

  18. Adequate peritoneal dialysis: theoretical model and patient treatment.

    PubMed

    Tast, C

    1998-01-01

    The objective of this study was to evaluate the relationship between adequate PD with sufficient weekly Kt/V (2.0) and Creatinine clearance (CCR) (60l) and necessary daily dialysate volume. This recommended parameter was the result of a recent multi-centre study (CANUSA). For this there were 40 patients in our hospital examined and compared in 1996, who carried out PD for at least 8 weeks and up to 6 years. These goals (CANUSA) are easily attainable in the early treatment of many individuals with a low body surface area (BSA). With higher BSA or missing RRF (Residual Renal Function) the daily dose of dialysis must be adjusted. We found it difficult to obtain the recommended parameters and tried to find a solution to this problem. The simplest method is to increase the volume or exchange rate. The most expensive method is to change from CAPD to APD with the possibility of higher volume or exchange rates. Selection of therapy must take into consideration: 1. patient preference, 2. body mass, 3. peritoneal transport rates, 4. ability to perform therapy, 5. cost of therapy and 6. risk of peritonitis. With this information in mind, an individual prescription can be formulated and matched to the appropriate modality of PD. PMID:10392062

  19. Comparison of Refractory Performance in Black Liquor Gasifiers and a Smelt Test System

    SciTech Connect

    Peascoe, RA

    2001-09-25

    Prior laboratory corrosion studies along with experience at the black liquor gasifier in New Bern, North Carolina, clearly demonstrate that serious material problems exist with the gasifier's refractory lining. Mullite-based and alumina-based refractories used at the New Bern facility suffered significant degradation even though they reportedly performed adequately in smaller scale systems. Oak Ridge National Laboratory's involvement in the failure analysis, and the initial exploration of suitable replacement materials, led to the realization that a simple and reliable, complementary method for refractory screening was needed. The development of a laboratory test system and its suitability for simulating the environment of black liquor gasifiers was undertaken. Identification and characterization of corrosion products were used to evaluate the test system as a rapid screening tool for refractory performance and as a predictor of refractory lifetime. Results from the test systems and pl ants were qualitatively similar.

  20. 48 CFR 1401.7001-4 - Acquisition performance measurement systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Acquisition performance measurement systems. 1401.7001-4 Section 1401.7001-4 Federal Acquisition Regulations System DEPARTMENT OF THE... Acquisition performance measurement systems. (a) The acquisition performance measurement system is a...

  1. 48 CFR 1401.7001-4 - Acquisition performance measurement systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Acquisition performance measurement systems. 1401.7001-4 Section 1401.7001-4 Federal Acquisition Regulations System DEPARTMENT OF THE... Acquisition performance measurement systems. (a) The acquisition performance measurement system is a...

  2. 48 CFR 1401.7001-4 - Acquisition performance measurement systems.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Acquisition performance measurement systems. 1401.7001-4 Section 1401.7001-4 Federal Acquisition Regulations System DEPARTMENT OF THE... Acquisition performance measurement systems. (a) The acquisition performance measurement system is a...

  3. Performance specification for control tower display systems

    NASA Astrophysics Data System (ADS)

    Aleva, Denise L.; Meyer, Frederick M.

    2003-09-01

    Personnel in airport control towers monitor and direct the takeoff of outgoing aircraft, landing of incoming aircraft and all movements of aircraft on the ground. Although the primary source of information for the Local Controller, Assistant Local Controller and the Ground Controller is the real world viewed through the windows of the control tower, electronic displays are also used to provide situation awareness. Due to the criticality of the work to be performed by the controllers and the rather unique environment of the air traffic control tower, display hardware standards, which have been developed for general use, are not directly applicable. The Federal Aviation Administration (FAA) requested assistance of Air Force Research Laboratory Human Effectiveness Directorate in producing a document which can be adopted as a Tower Display Standard usable by display engineers, human factors practitioners and system integrators. Particular emphasis was placed on human factors issues applicable to the control tower environment and controller task demands.

  4. Performance evaluation of conventional chiller systems

    SciTech Connect

    Beyene, A.

    1995-06-01

    This article describes an optimization technique to reduce chiller energy usage by evaluating energy saving strategies. In most commercial buildings and industrial plants, HVAC systems are the largest energy consumers and offer the owners significant potential for savings. Chiller machines are also of interest to utility companies because they operate during cooling times that overlap peak hours of warmer climate zones, thereby contributing to peak energy demands. The key performance parameter in chiller analysis is the kW/ton of refrigeration, which is the ratio of the amount of electrical energy consumed relative to the amount of cooling energy delivers. To obtain the kW/ton refrigeration for a chiller, the electric power consumption (kW) of the compressor should be measured, or calculated if the instantaneous current and voltage are known.

  5. Performance of Tornado Wind Energy Conversion Systems

    SciTech Connect

    Volk, T.

    1982-09-01

    The flow characteristics and power production capabilities of the Tornado Wind Energy Conversion System (TWECS) are examined. Experimental results indicate that the confined vortex in the tower of TWECS rotates approximately as a solid body and only supplements total power production, most of which comes from the tower acting as a bluff body. Wrapped tower experiments were performed by fitting a plastic shroud 360 deg around the tower from the top of the bottom inlet to the tower exit level which transformed the TWECS into a hollow, raised cylinder. Coefficient of power is compared for louvered towers vs. wrapped tower. The fact that the wrapped tower performs as well as the louvered tower suggests that it is the pressure difference between the bottom inlet region and the region above the tower (where the pressure of the ambient flow will be somewhat reduced owing to its acceleration over the bluff body of the tower) which determines the vertical force on the fluid within the tower.

  6. Thermophotovoltaic Converter Performance for Radioisotope Power Systems

    NASA Astrophysics Data System (ADS)

    Crowley, Christopher J.; Elkouh, Nabil A.; Murray, Susan; Chubb, Donald L.

    2005-02-01

    The development of lightweight, efficient power for emerging NASA missions and recent advances in thermophotovoltaic (TPV) conversion technology have renewed interest in combining radioisotope heat sources with photovoltaic energy conversion for Radioisotope Power Systems (RPS) for spacecraft. TPV power conversion uses advanced materials able to utilize a broader, spectrally tuned range of wavelengths for more efficient power conversion than Si solar cells. Spectral control, through choices of selective radiant emitters, TPV modules, and filters, is key to high-efficiency operation. This paper describes performance tests of an array of TPV cells with boundary conditions prototypical of an RPS. TPV performance tests were conducted at prototypical array size (≅100 cm2), emitter temperature (1350 K), and heat rejection temperature (300 K). Test hardware included InGaAs TPV cells at 0.60 eV band-gap, with tandem plasma/interference filters for spectral control. At the target emitter temperature of 1350 K, a conversion efficiency of 19% has been demonstrated for the TPV module. Results are consistent with measured cell efficiency (28%), calculated spectral control efficiency (80%), and calculated thermal efficiency in the optical cavity (90%).

  7. Tutorial: Clock and Clock Systems Performance Measures

    NASA Technical Reports Server (NTRS)

    Allan, David W.

    1996-01-01

    This tutorial contains basic material - familiar to many. This will be used as a foundation upon which we will build - bringing forth some new material and equations that have been developed especially for this tutorial. These will provide increased understanding toward parameter estimation of clock and clock system's performance. There is a very important International Telecommunications Union (ITU) handbook being prepared at this time which goes much further than this tutorial has time to do. I highly recommend it as an excellent resource document. The final draft is just now being completed, and it should be ready late in 1996. It is an outstanding handbook; Dr. Sydnor proposed to the ITU-R several years ago, and is the editor with my assistance. We have some of the best contributors in the community from around the world who have written the ten chapters in this handbook. The title of the handbook is 'Selection and use of Precise Frequency and Time Systems'. It will be available from the ITU secretariat in Geneva, Switzerland, but NAVTEC Seminars also plans to be a distributor.

  8. Thermal Performance Testing Of Cryogenic Piping Systems

    NASA Technical Reports Server (NTRS)

    Fesmire, J. E.; Augustynowicz, S. D.; Nagy, Z. F.

    2003-01-01

    Thermal performance measurement of piping systems under actual field conditions is important for space launch development and commercial industry. Knowledge of the true insulating effectiveness is needed in system design, development, and research activities. A new 18-meter-long test apparatus for cryogenic pipelines has been developed. Three different pipelines, rigid or flexible, can be tested simultaneously. Critical factors in heat leak measurements include eliminating heat transfer at end connections and obtaining proper liquid saturation condition. Effects due to variations in the external ambient conditions like wind, humidity, and solar radiation must be minimized. The static method of liquid nitrogen evaporation has been demonstrated, but the apparatus can be adapted for dynamic testing with cryogens, chilled water, or other working fluids. This technology is suited for the development of an industry standard test apparatus and method. Examples of the heat transfer data from testing commercially available pipelines are given. Prototype pipelines are currently being tested and evaluated at the Cryogenics Test Laboratory of NASA Kennedy Space Center.

  9. Lawrence Livermore National Laboratory low-level waste systems performance assessment

    SciTech Connect

    Not Available

    1990-11-01

    This Low-Level Radioactive Waste (LLW) Systems Performance Assessment (PA) presents a systematic analysis of the potential risks posed by the Lawrence Livermore National Laboratory (LLNL) waste management system. Potential risks to the public and environment are compared to established performance objectives as required by DOE Order 5820.2A. The report determines the associated maximum individual committed effective dose equivalent (CEDE) to a member of the public from LLW and mixed waste. A maximum annual CEDE of 0.01 mrem could result from routine radioactive liquid effluents. A maximum annual CEDE of 0.003 mrem could result from routine radioactive gaseous effluents. No other pathways for radiation exposure of the public indicated detectable levels of exposure. The dose rate, monitoring, and waste acceptance performance objectives were found to be adequately addressed by the LLNL Program. 88 refs., 3 figs., 17 tabs.

  10. Performance model assessment for multi-junction concentrating photovoltaic systems.

    SciTech Connect

    Riley, Daniel M.; McConnell, Robert.; Sahm, Aaron; Crawford, Clark; King, David L.; Cameron, Christopher P.; Foresi, James S.

    2010-03-01

    Four approaches to modeling multi-junction concentrating photovoltaic system performance are assessed by comparing modeled performance to measured performance. Measured weather, irradiance, and system performance data were collected on two systems over a one month period. Residual analysis is used to assess the models and to identify opportunities for model improvement.

  11. Performance and stability analysis of a photovoltaic power system

    NASA Technical Reports Server (NTRS)

    Merrill, W. C.; Blaha, R. J.; Pickrell, R. L.

    1978-01-01

    The performance and stability characteristics of a 10 kVA photovoltaic power system are studied using linear Bode analysis and a nonlinear analog simulation. Power conversion efficiencies, system stability, and system transient performance results are given for system operation at various levels of solar insolation. Additionally, system operation and the modeling of system components for the purpose of computer simulation are described.

  12. Simulated performance results of the OMV video compression telemetry system

    NASA Technical Reports Server (NTRS)

    Ingels, Frank; Parker, Glenn; Thomas, Lee Ann

    1989-01-01

    The control system of NASA's Orbital Maneuvering Vehicle (OMV) will employ range/range-rate radar, a forward command link, and a compressed video return link. The video data is compressed by sampling every sixth frame of data; a rate of 5 frames/sec is adequate for the OMV docking speeds. Further axial compression is obtained, albeit at the expense of spatial resolution, by averaging adjacent pixels. The remaining compression is achieved on the basis of differential pulse-code modulation and Huffman run-length encoding. A concatenated error-correction coding system is used to protect the compressed video data stream from channel errors.

  13. Space rescue system definition (system performance analysis and trades)

    NASA Astrophysics Data System (ADS)

    Housten, Sam; Elsner, Tim; Redler, Ken; Svendsen, Hal; Wenzel, Sheri

    This paper addresses key technical issues involved in the system definition of the Assured Crew Return Vehicle (ACRV). The perspective on these issues is that of a prospective ACRV contractor, performing system analysis and trade studies. The objective of these analyses and trade studies is to develop the recovery vehicle system concept and top level requirements. The starting point for this work is the definition of the set of design missions for the ACRV. This set of missions encompasses three classes of contingency/emergency (crew illness/injury, space station catastrophe/failure, transportation element catastrophe/failure). The need is to provide a system to return Space Station crew to Earth quickly (less than 24 hours) in response to randomly occurring contingency events over an extended period of time (30 years of planned Space Station life). The main topics addressed and characterized in this paper include the following: Key Recovery (Rescue) Site Access Considerations; Rescue Site Locations and Distribution; Vehicle Cross Range vs Site Access; On-orbit Loiter Capability and Vehicle Design; and Water vs. Land Recovery.

  14. Clock performance as a critical parameter in navigation satellite systems

    NASA Technical Reports Server (NTRS)

    Anderle, R. J.

    1978-01-01

    The high performance of available oscillators has permitted the development of invaluable navigation and geodetic satellite systems. However, still higher performance oscillators would further improve the accuracy or flexibility of the systems.

  15. High-performance commercial building systems

    SciTech Connect

    Selkowitz, Stephen

    2003-10-01

    This report summarizes key technical accomplishments resulting from the three year PIER-funded R&D program, ''High Performance Commercial Building Systems'' (HPCBS). The program targets the commercial building sector in California, an end-use sector that accounts for about one-third of all California electricity consumption and an even larger fraction of peak demand, at a cost of over $10B/year. Commercial buildings also have a major impact on occupant health, comfort and productivity. Building design and operations practices that influence energy use are deeply engrained in a fragmented, risk-averse industry that is slow to change. Although California's aggressive standards efforts have resulted in new buildings designed to use less energy than those constructed 20 years ago, the actual savings realized are still well below technical and economic potentials. The broad goal of this program is to develop and deploy a set of energy-saving technologies, strategies, and techniques, and improve processes for designing, commissioning, and operating commercial buildings, while improving health, comfort, and performance of occupants, all in a manner consistent with sound economic investment practices. Results are to be broadly applicable to the commercial sector for different building sizes and types, e.g. offices and schools, for different classes of ownership, both public and private, and for owner-occupied as well as speculative buildings. The program aims to facilitate significant electricity use savings in the California commercial sector by 2015, while assuring that these savings are affordable and promote high quality indoor environments. The five linked technical program elements contain 14 projects with 41 distinct R&D tasks. Collectively they form a comprehensive Research, Development, and Demonstration (RD&D) program with the potential to capture large savings in the commercial building sector, providing significant economic benefits to building owners and

  16. 5 CFR 430.304 - SES performance management systems.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 5 Administrative Personnel 1 2014-01-01 2014-01-01 false SES performance management systems. 430.304 Section 430.304 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PERFORMANCE MANAGEMENT Managing Senior Executive Performance § 430.304 SES performance management systems. (a) To encourage excellence in...

  17. 5 CFR 430.304 - SES performance management systems.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 5 Administrative Personnel 1 2012-01-01 2012-01-01 false SES performance management systems. 430.304 Section 430.304 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PERFORMANCE MANAGEMENT Managing Senior Executive Performance § 430.304 SES performance management systems....

  18. 5 CFR 430.304 - SES performance management systems.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 5 Administrative Personnel 1 2013-01-01 2013-01-01 false SES performance management systems. 430.304 Section 430.304 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PERFORMANCE MANAGEMENT Managing Senior Executive Performance § 430.304 SES performance management systems. (a) To encourage excellence in...

  19. 5 CFR 430.304 - SES performance management systems.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 5 Administrative Personnel 1 2011-01-01 2011-01-01 false SES performance management systems. 430.304 Section 430.304 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PERFORMANCE MANAGEMENT Managing Senior Executive Performance § 430.304 SES performance management systems....

  20. 5 CFR 430.304 - SES performance management systems.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false SES performance management systems. 430.304 Section 430.304 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PERFORMANCE MANAGEMENT Managing Senior Executive Performance § 430.304 SES performance management systems....

  1. Electronic Performance Support Systems (EPSS): Making the Transition.

    ERIC Educational Resources Information Center

    Des Jardins, Susan; Davis, Harry, Jr.

    An electronic performance support system (EPSS) is a computerized system designed to increase productivity by supporting the performance of the worker on demand at the time of need. This way, workers are allowed to perform with a minimum of intervention from others. Popular examples of performance support tools, or partially implemented EPSSs,…

  2. 5 CFR 9901.405 - Performance management system requirements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 5 Administrative Personnel 3 2011-01-01 2011-01-01 false Performance management system... DEFENSE NATIONAL SECURITY PERSONNEL SYSTEM (NSPS) Performance Management § 9901.405 Performance management system requirements. (a) The Secretary may issue implementing issuances further defining a...

  3. 5 CFR 9901.405 - Performance management system requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Performance management system... DEFENSE NATIONAL SECURITY PERSONNEL SYSTEM (NSPS) Performance Management § 9901.405 Performance management system requirements. (a) The Secretary may issue implementing issuances further defining a...

  4. Transforming the Sandia 2{line_integral} optical performance measurement system to color

    SciTech Connect

    Grossman, J.W.; Edgar, R.M.

    1996-02-01

    A monochrome 2f optical performance measurement system at Sandia. To meet the goals of an optical test method that can be done in a relatively short period of time, requires little space, uses ``off the shelf`` test equipment, and provides a quantitative measure adequate to address quality control requirements, necessitates conversion of the system to use color. This test method is based on common ray trace calculations for targets and images at the radius of curvature for spherical and parabolic (f/D>3) concentrators. The implementation of a color system involved changing hardware and software. Target design -- the layout, materials, and color selection -- is a primary consideration. As the system development neared completion, it was used in several applications to measure solar concentrator facet performance and evaluate system performance. Included in this testing was a side-by-side test with the SHOT system at the National Renewable Energy Laboratory. This paper discusses the development of the color system hardware, reviews the results of testing, and presents the color system software.

  5. Is the Marketing Concept Adequate for Continuing Education?

    ERIC Educational Resources Information Center

    Rittenburg, Terri L.

    1984-01-01

    Because educators have a social responsibility to those they teach, the marketing concept may not be adequate as a philosophy for continuing education. In attempting to broaden the audience for continuing education, educators should consider a societal marketing concept to meet the needs of the educationally disadvantaged. (SK)

  6. 9 CFR 305.3 - Sanitation and adequate facilities.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Sanitation and adequate facilities. 305.3 Section 305.3 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION...

  7. Understanding Your Adequate Yearly Progress (AYP), 2011-2012

    ERIC Educational Resources Information Center

    Missouri Department of Elementary and Secondary Education, 2011

    2011-01-01

    The "No Child Left Behind Act (NCLB) of 2001" requires all schools, districts/local education agencies (LEAs) and states to show that students are making Adequate Yearly Progress (AYP). NCLB requires states to establish targets in the following ways: (1) Annual Proficiency Target; (2) Attendance/Graduation Rates; and (3) Participation Rates.…

  8. Assessing Juvenile Sex Offenders to Determine Adequate Levels of Supervision.

    ERIC Educational Resources Information Center

    Gerdes, Karen E.; And Others

    1995-01-01

    This study analyzed the internal consistency of four inventories used by Utah probation officers to determine adequate and efficacious supervision levels and placement for juvenile sex offenders. Three factors accounted for 41.2 percent of variance (custodian's and juvenile's attitude toward intervention, offense characteristics, and historical…

  9. 34 CFR 200.13 - Adequate yearly progress in general.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 1 2011-07-01 2011-07-01 false Adequate yearly progress in general. 200.13 Section 200.13 Education Regulations of the Offices of the Department of Education OFFICE OF ELEMENTARY AND SECONDARY EDUCATION, DEPARTMENT OF EDUCATION TITLE I-IMPROVING THE ACADEMIC ACHIEVEMENT OF THE...

  10. 34 CFR 200.20 - Making adequate yearly progress.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 1 2011-07-01 2011-07-01 false Making adequate yearly progress. 200.20 Section 200.20 Education Regulations of the Offices of the Department of Education OFFICE OF ELEMENTARY AND SECONDARY EDUCATION, DEPARTMENT OF EDUCATION TITLE I-IMPROVING THE ACADEMIC ACHIEVEMENT OF THE DISADVANTAGED...

  11. Do Beginning Teachers Receive Adequate Support from Their Headteachers?

    ERIC Educational Resources Information Center

    Menon, Maria Eliophotou

    2012-01-01

    The article examines the problems faced by beginning teachers in Cyprus and the extent to which headteachers are considered to provide adequate guidance and support to them. Data were collected through interviews with 25 school teachers in Cyprus, who had recently entered teaching (within 1-5 years) in public primary schools. According to the…

  12. Performance improvement integration: a whole systems approach.

    PubMed

    Page, C K

    1999-02-01

    Performance improvement integration in health care organizations is a challenge for health care leaders. Required for accreditation by the Joint Commission on Accreditation of Healthcare Organizations (Joint Commission), performance improvement (PI) can be designed as a sustainable model for performance to survive in a turbulent period. Central Baptist Hospital developed a model for PI that focused on strategy established by the leadership team, delineated responsibility through the organizational structure of shared governance, and accountability for outcomes evidenced through the organization's profitability. Such an approach integrated into the culture of the organization can produce positive financial margins, positive customer satisfaction, and commendations from the Joint Commission. PMID:9926679

  13. 42 CFR 438.207 - Assurances of adequate capacity and services.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... with the State's requirements for availability of services, as set forth in § 438.206. (e) CMS' right... HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS MANAGED CARE Quality Assessment and Performance... 42 Public Health 4 2010-10-01 2010-10-01 false Assurances of adequate capacity and services....

  14. A Performance Study of Event Processing Systems

    NASA Astrophysics Data System (ADS)

    Mendes, Marcelo R. N.; Bizarro, Pedro; Marques, Paulo

    Event processing engines are used in diverse mission-critical scenarios such as fraud detection, traffic monitoring, or intensive care units. However, these scenarios have very different operational requirements in terms of, e.g., types of events, queries/patterns complexity, throughput, latency and number of sources and sinks. What are the performance bottlenecks? Will performance degrade gracefully with increasing loads? In this paper we make a first attempt to answer these questions by running several micro-benchmarks on three different engines, while we vary query parameters like window size, window expiration type, predicate selectivity, and data values. We also perform some experiments to assess engines scalability with respect to number of queries and propose ways for evaluating their ability in adapting to changes in load conditions. Lastly, we show that similar queries have widely different performances on the same or different engines and that no engine dominates the other two in all scenarios.

  15. Database Performance Monitoring for the Photovoltaic Systems

    SciTech Connect

    Klise, Katherine A.

    2015-10-01

    The Database Performance Monitoring (DPM) software (copyright in processes) is being developed at Sandia National Laboratories to perform quality control analysis on time series data. The software loads time indexed databases (currently csv format), performs a series of quality control tests defined by the user, and creates reports which include summary statistics, tables, and graphics. DPM can be setup to run on an automated schedule defined by the user. For example, the software can be run once per day to analyze data collected on the previous day. HTML formatted reports can be sent via email or hosted on a website. To compare performance of several databases, summary statistics and graphics can be gathered in a dashboard view which links to detailed reporting information for each database. The software can be customized for specific applications.

  16. Improving Steam System Performance: A Sourcebook for Industry, Second Edition

    SciTech Connect

    2012-02-23

    This sourcebook is designed to provide steam system users with a reference that describes the basic steam system components, outlines opportunities for energy and performance improvements, and discusses the benefits of a systems approach in identifying and implementing these improvement opportunities. The sourcebook is divided into three main sections: steam system basics, performance improvement opportunities, and where to find help.

  17. Antares beam-alignment-system performance

    SciTech Connect

    Appert, Q.D.; Bender, S.C.

    1983-01-01

    The beam alignment system for the 24-beam-sector Antares CO/sub 2/ fusion laser automatically aligns more than 200 optical elements. A visible-wavelength alignment technique is employed which uses a telescope/TV system to view point-light sources appropriately located down the beamline. The centroids of the light spots are determined by a video tracker, which generates error signals used by the computer control system to move appropriate mirrors in a closed-loop system. Final touch-up alignment is accomplished by projecting a CO/sub 2/ alignment laser beam through the system and sensing its position at the target location. The techniques and control algorithms employed have resulted in alignment accuracies exceeding design requirements. By employing video processing to determine the centroids of diffraction images and by averaging over multiple TV frames, we achieve alignment accuracies better than 0.1 times system diffraction limits in the presence of air turbulence.

  18. Performance evaluation of floor thermal storage system

    SciTech Connect

    Shinkai, Koichiro; Kasuya, Atsushi; Kato, Masahiro

    2000-07-01

    Environmental issues were seriously addressed when a new building was designed with district heating and cooling for the Osaka gas company. As a result, the building was officially recognized as Environmentally Conscious Building No. 1 by the Construction Ministry. In order to reduce cost by peak shaving, adoption of a floor thermal storage system was planned. This paper describes results regarding the peak shaving by floor thermal storage system in designing the air-conditioning system.

  19. An hierarchical approach to performance evaluation of expert systems

    NASA Technical Reports Server (NTRS)

    Dominick, Wayne D. (Editor); Kavi, Srinu

    1985-01-01

    The number and size of expert systems is growing rapidly. Formal evaluation of these systems - which is not performed for many systems - increases the acceptability by the user community and hence their success. Hierarchical evaluation that had been conducted for computer systems is applied for expert system performance evaluation. Expert systems are also evaluated by treating them as software systems (or programs). This paper reports many of the basic concepts and ideas in the Performance Evaluation of Expert Systems Study being conducted at the University of Southwestern Louisiana.

  20. Preliminary basic performance analysis of the Cedar multiprocessor memory system

    NASA Technical Reports Server (NTRS)

    Gallivan, K.; Jalby, W.; Turner, S.; Veidenbaum, A.; Wijshoff, H.

    1991-01-01

    Some preliminary basic results on the performance of the Cedar multiprocessor memory system are presented. Empirical results are presented and used to calibrate a memory system simulator which is then used to discuss the scalability of the system.

  1. MSFC Skylab airlock module, volume 1. [systems design and performance

    NASA Technical Reports Server (NTRS)

    1974-01-01

    The history and development of the Skylab Airlock Module and Payload Shroud is presented from initial concept through final design. A summary is given of the Airlock features and systems. System design and performance are presented for the Spent Stage Experiment Support Module, structure and mechanical systems, mass properties, thermal and environmental control systems, EVA/IVA suite system, electrical power system, sequential system, sequential system, and instrumentation system.

  2. Lunar roving vehicle navigation system performance review

    NASA Technical Reports Server (NTRS)

    Smith, E. C.; Mastin, W. C.

    1973-01-01

    The design and operation of the lunar roving vehicle (LRV) navigation system are briefly described. The basis for the premission LRV navigation error analysis is explained and an example included. The real time mission support operations philosophy is presented. The LRV navigation system operation and accuracy during the lunar missions are evaluated.

  3. IR system field performance with superresolution

    NASA Astrophysics Data System (ADS)

    Fanning, Jonathan; Miller, Justin; Park, Jennifer; Tener, Gene; Reynolds, Joseph; O'Shea, Patrick; Halford, Carl; Driggers, Ron

    2007-04-01

    Superresolution processing is currently being used to improve the performance of infrared imagers through an increase in sampling, the removal of aliasing, and the reduction of fixed-pattern noise. The performance improvement of superresolution has not been previously tested on military targets. This paper presents the results of human perception experiments to determine field performance on the NVESD standard military eight (8)-target set using a prototype LWIR camera. These experiments test and compare human performance of both still images and movie clips, each generated with and without superresolution processing. Lockheed Martin's XR® algorithm is tested as a specific example of a modern combined superresolution and image processing algorithm. Basic superresolution with no additional processing is tested to help determine the benefit of separate processes. The superresolution processing is modeled in NVThermIP for comparison to the perception test. The measured range to 70% probability of identification using XR® is increased by approximately 34% while the 50% range is increased by approximately 19% for this camera. A comparison case is modeled using a more undersampled commercial MWIR sensor that predicts a 45% increase in range performance from superresolution.

  4. Performance results for a hybrid coding system.

    NASA Technical Reports Server (NTRS)

    Hoffman, L. B.

    1971-01-01

    Results of computer simulation studies of the hybrid pull-up bootstrap decoding algorithm, using a constraint length 24, nonsystematic, rate 1/2 convolutional code for the symmetric channel with both binary and eight-level quantized outputs. Computational performance was used to measure the effect of several decoder parameters and determine practical operating constraints. Results reveal that the track length may be reduced to 500 information bits with small degradation in performance. The optimum number of tracks per block was found to be in the range from 7 to 11. An effective technique was devised to efficiently allocate computational effort and identify reliably decoded data sections. Long simulations indicate that a practical bootstrap decoding configuration has a computational performance about 1.0 dB better than sequential decoding and an output bit error rate about .0000025 near the R sub comp point.

  5. Maximizing physician performance: a systems approach.

    PubMed

    Smith, R

    1997-12-01

    Managed care organizations are aware of the importance of managing the quality of care and controlling costs associated with the delivery of care. By utilizing physician-level performance reporting, an organization can help its physicians manage the organization's resources across the continuum of care. Physician participation can be obtained by developing a multicomponent program that includes opportunities for physician input regarding resource allocation and benefit packages; by articulating and documenting the organization's goals and priorities; by providing physicians with systemwide data related to indicators of their performance levels; and by offering financial incentives. PMID:10174784

  6. Performance analysis of instrumentation system management policies

    SciTech Connect

    Waheed, A.; Melfi, V.F.; Rover, D.T.

    1995-12-01

    Run-time trace data helps to debug and analyze the parallel programs. Obtaining and managing this data during run-time is the responsibility of an instrumentation system that incurs overhead. In its worst case, this overhead can result in severe perturbation of the behavior of the actual program. This paper presents a queuing model for an instrumentation system. The purpose is to provide a rigorous mathematical tool that could allow the analysis of the overhead of program behavior due to the instrumentation system management policies. We summarize the effects of two management policies: FOF and FAOF policies.

  7. High-performance computing and distributed systems

    SciTech Connect

    Loken, S.C.; Greiman, W.; Jacobson, V.L.; Johnston, W.E.; Robertson, D.W.; Tierney, B.L.

    1992-09-01

    We present a scenario for a fully distributed computing environment in which computing, storage, and I/O elements are configured on demand into ``virtual systems`` that are optimal for the solution of a particular problem. We also describe present two pilot projects that illustrate some of the elements and issues of this scenario. The goal of this work is to make the most powerful computing systems those that are logically assembled from network based components, and to make those systems available independent of the geographic location of the constituent elements.

  8. High-performance computing and distributed systems

    SciTech Connect

    Loken, S.C.; Greiman, W.; Jacobson, V.L.; Johnston, W.E.; Robertson, D.W.; Tierney, B.L.

    1992-09-01

    We present a scenario for a fully distributed computing environment in which computing, storage, and I/O elements are configured on demand into virtual systems'' that are optimal for the solution of a particular problem. We also describe present two pilot projects that illustrate some of the elements and issues of this scenario. The goal of this work is to make the most powerful computing systems those that are logically assembled from network based components, and to make those systems available independent of the geographic location of the constituent elements.

  9. Performance Health Monitoring of Large-Scale Systems

    SciTech Connect

    Rajamony, Ram

    2014-11-20

    This report details the progress made on the ASCR funded project Performance Health Monitoring for Large Scale Systems. A large-­‐scale application may not achieve its full performance potential due to degraded performance of even a single subsystem. Detecting performance faults, isolating them, and taking remedial action is critical for the scale of systems on the horizon. PHM aims to develop techniques and tools that can be used to identify and mitigate such performance problems. We accomplish this through two main aspects. The PHM framework encompasses diagnostics, system monitoring, fault isolation, and performance evaluation capabilities that indicates when a performance fault has been detected, either due to an anomaly present in the system itself or due to contention for shared resources between concurrently executing jobs. Software components called the PHM Control system then build upon the capabilities provided by the PHM framework to mitigate degradation caused by performance problems.

  10. Thermal Components Boost Performance of HVAC Systems

    NASA Technical Reports Server (NTRS)

    2012-01-01

    As the International Space Station (ISS) travels 17,500 miles per hour, normal is having a constant sensation of free-falling. Normal is no rain, but an extreme amount of shine.with temperatures reaching 250 F when facing the Sun. Thanks to a number of advanced control systems onboard the ISS, however, the interior of the station remains a cool, comfortable, normal environment where astronauts can live and work for extended periods of time. There are two main control systems on the ISS that make it possible for humans to survive in space: the Thermal Control System (TCS) and the Environmental Control and Life Support system. These intricate assemblies work together to supply water and oxygen, regulate temperature and pressure, maintain air quality, and manage waste. Through artificial means, these systems create a habitable environment for the space station s crew. The TCS constantly works to regulate the temperature not only for astronauts, but for the critical instruments and machines inside the spacecraft as well. To do its job, the TCS encompasses several components and systems both inside and outside of the ISS. Inside the spacecraft, a liquid heat-exchange process mechanically pumps fluids in closed-loop circuits to collect, transport, and reject heat. Outside the ISS, an external system circulates anhydrous ammonia to transport heat and cool equipment, and radiators release the heat into space. Over the years, NASA has worked with a variety of partners.public and private, national and international. to develop and refine the most complex thermal control systems ever built for spacecraft, including the one on the ISS.

  11. APS storage ring vacuum system performance

    SciTech Connect

    Noonan, J.R.; Gagliano, J.; Goeppner, G.A.

    1997-06-01

    The Advanced Photon Source (APS) storage ring was designed to operated with 7-GeV, 100-mA positron beam with lifetimes > 20 hours. The lifetime is limited by residual gas scattering and Touschek scattering at this time. Photon-stimulated desorption and microwave power in the rf cavities are the main gas loads. Comparison of actual system gas loads and design calculations will be given. In addition, several special features of the storage ring vacuum system will be presented.

  12. 19 CFR 143.5 - System performance requirements.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 2 2011-04-01 2011-04-01 false System performance requirements. 143.5 Section 143.5 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) SPECIAL ENTRY PROCEDURES Automated Broker Interface § 143.5 System performance requirements. The performance...

  13. A Performance Evaluation System for Professional Support Personnel.

    ERIC Educational Resources Information Center

    Stronge, James H.; Helm, Virginia M.

    1992-01-01

    Provides a conceptual framework for a professional support personnel (e.g., counselors, deans, librarians) performance evaluation system. Outlines steps in evaluating support personnel (identifying system needs, relating program expectations to job responsibilities, selecting performance indicators, setting job performance standards, documenting…

  14. A Comparative Study of Electronic Performance Support Systems

    ERIC Educational Resources Information Center

    Nguyen, Frank; Klein, James D.; Sullivan, Howard

    2005-01-01

    Electronic performance support systems (EPSS) deliver relevant support information to users while they are performing tasks. The present study examined the effect of different types of EPSS on user performance, attitudes, system use and time on task. Employees at a manufacturing company were asked to complete a procedural software task and…

  15. Maintaining adequate hydration and nutrition in adult enteral tube feeding.

    PubMed

    Dunn, Sasha

    2015-01-01

    Predicting the nutritional and fluid requirements of enterally-fed patients can be challenging and the practicalities of ensuring adequate delivery must be taken into consideration. Patients who are enterally fed can be more reliant on clinicians, family members and carers to meet their nutrition and hydration needs and identify any deficiencies, excesses or problems with delivery. Estimating a patient's requirements can be challenging due to the limitations of using predictive equations in the clinical setting. Close monitoring by all those involved in the patient's care, as well as regular review by a dietitian, is therefore required to balance the delivery of adequate feed and fluids to meet each patient's individual needs and prevent the complications of malnutrition and dehydration. Increasing the awareness of the signs of malnutrition and dehydration in patients receiving enteral tube feeding among those involved in a patient's care will help any deficiencies to be detected early on and rectified before complications occur. PMID:26087203

  16. Assessing juvenile sex offenders to determine adequate levels of supervision.

    PubMed

    Gerdes, K E; Gourley, M M; Cash, M C

    1995-08-01

    The present study analyzed the internal consistency of four inventories currently being used by probation officers in the state of Utah to determine adequate and efficacious supervision levels and placement for juvenile sex offenders. The internal consistency or reliability of the inventories ranged from moderate to good. Factor analysis was utilized to significantly increase the reliability of the four inventories by collapsing them into the following three factors: (a) Custodian's and Juvenile's Attitude Toward Intervention; (b) Offense Characteristics; and (c) Historical Risk Factors. These three inventories/factors explained 41.2% of the variance in the combined inventories' scores. Suggestions are made regarding the creation of an additional inventory. "Characteristics of the Victim" to account for more of the variance. In addition, suggestions as to how these inventories can be used by probation officers to make objective and consistent decisions about adequate supervision levels and placement for juvenile sex offenders are discussed. PMID:7583754

  17. Stochastic Satbility and Performance Robustness of Linear Multivariable Systems

    NASA Technical Reports Server (NTRS)

    Ryan, Laurie E.; Stengel, Robert F.

    1990-01-01

    Stochastic robustness, a simple technique used to estimate the robustness of linear, time invariant systems, is applied to a single-link robot arm control system. Concepts behind stochastic stability robustness are extended to systems with estimators and to stochastic performance robustness. Stochastic performance robustness measures based on classical design specifications are introduced, and the relationship between stochastic robustness measures and control system design parameters are discussed. The application of stochastic performance robustness, and the relationship between performance objectives and design parameters are demonstrated by means of example. The results prove stochastic robustness to be a good overall robustness analysis method that can relate robustness characteristics to control system design parameters.

  18. Advanced solidification system using high performance cement

    SciTech Connect

    Kikuchi, Makoto; Matsuda, Masami; Nishi, Takashi; Tsuchiya, Hiroyuki; Izumida, Tatsuo

    1995-12-31

    Advanced cement solidification is proposed for the solidification of radioactive waste such as spent ion exchange resin, incineration ash and liquid waste. A new, high performance cement has been developed to raise volume reduction efficiency and lower radioactivity release into the environment. It consists of slag cement, reinforcing fiber, natural zeolite and lithium nitrate (LiNO{sub 3}). The fiber allows waste loading to be increased from 20 to 55kg-dry resin/200L. The zeolite, whose main constituent is clinoptilolite, reduces cesium leachability from the waste form to about 1/10. Lithium nitrate prevents alkaline corrosion of the aluminum, contained in ash, and reduces hydrogen gas generation. Laboratory and full-scale pilot plant experiments were performed to evaluate properties of the waste form, using simulated wastes. Emphasis was laid on improvement of solidification of spent resin and ash.

  19. Performance analysis of panoramic infrared systems

    NASA Astrophysics Data System (ADS)

    Furxhi, Orges; Driggers, Ronald G.; Holst, Gerald; Krapels, Keith

    2014-05-01

    Panoramic imagers are becoming more commonplace in the visible part of the spectrum. These imagers are often used in the real estate market, extreme sports, teleconferencing, and security applications. Infrared panoramic imagers, on the other hand, are not as common and only a few have been demonstrated. A panoramic image can be formed in several ways, using pan and stitch, distributed aperture, or omnidirectional optics. When omnidirectional optics are used, the detected image is a warped view of the world that is mapped on the focal plane array in a donut shape. The final image on the display is the mapping of the omnidirectional donut shape image back to the panoramic world view. In this paper we analyze the performance of uncooled thermal panoramic imagers that use omnidirectional optics, focusing on range performance.

  20. High-Performance Energy Applications and Systems

    SciTech Connect

    Miller, Barton

    2014-05-19

    The Paradyn project has a history of developing algorithms, techniques, and software that push the cutting edge of tool technology for high-end computing systems. Under this funding, we are working on a three-year agenda to make substantial new advances in support of new and emerging Petascale systems. The overall goal for this work is to address the steady increase in complexity of these petascale systems. Our work covers two key areas: (1) The analysis, instrumentation and control of binary programs. Work in this area falls under the general framework of the Dyninst API tool kits. (2) Infrastructure for building tools and applications at extreme scale. Work in this area falls under the general framework of the MRNet scalability framework. Note that work done under this funding is closely related to work done under a contemporaneous grant, “Foundational Tools for Petascale Computing”, SC0003922/FG02-10ER25940, UW PRJ27NU.

  1. Performance Reports: Mirror alignment system performance prediction comparison between SAO and EKC

    NASA Technical Reports Server (NTRS)

    Tananbaum, H. D.; Zhang, J. P.

    1994-01-01

    The objective of this study is to perform an independent analysis of the residual high resolution mirror assembly (HRMA) mirror distortions caused by force and moment errors in the mirror alignment system (MAS) to statistically predict the HRMA performance. These performance predictions are then compared with those performed by Kodak to verify their analysis results.

  2. Performance Support Systems: Integrating AI, Hypermedia, and CBT to Enhance User Performance.

    ERIC Educational Resources Information Center

    McGraw, Karen L.

    1994-01-01

    Examines the use of a performance support system (PSS) to enhance user performance on an operational system. Highlights include background information that describes the stimulus for PSS development; discussion of the major PSS components and the technology they require; and discussion of the design of a PSS for a complex database system.…

  3. Analytical simulation of SPS system performance, volume 3, phase 3

    NASA Technical Reports Server (NTRS)

    Kantak, A. V.; Lindsey, W. C.

    1980-01-01

    The simulation model for the Solar Power Satellite spaceantenna and the associated system imperfections are described. Overall power transfer efficiency, the key performance issue, is discussed as a function of the system imperfections. Other system performance measures discussed include average power pattern, mean beam gain reduction, and pointing error.

  4. Teachers' Performance Motivation System in Thai Primary Schools

    ERIC Educational Resources Information Center

    Pasathang, Sarojn; Tesaputa, Kowat; Sataphonwong, Pattananusron

    2016-01-01

    This research aims to: 1) study the present conditions and desirable condition of the motivation systems as well as how to find methods for motivating the performance of teachers in primary schools, 2) develop a motivation system for the performance of teachers in primary schools, 3) study the effects of using the motivation system for compliance…

  5. 5 CFR 9701.405 - Performance management system requirements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 5 Administrative Personnel 3 2011-01-01 2011-01-01 false Performance management system... RESOURCES MANAGEMENT SYSTEM (DEPARTMENT OF HOMELAND SECURITY-OFFICE OF PERSONNEL MANAGEMENT) DEPARTMENT OF HOMELAND SECURITY HUMAN RESOURCES MANAGEMENT SYSTEM Performance Management § 9701.405...

  6. Information Systems and Performance Measures in Schools.

    ERIC Educational Resources Information Center

    Coleman, James S.; Karweit, Nancy L.

    Large school systems bring various administrative problems in handling scheduling, records, and avoiding making red tape casualties of students. The authors review a portion of the current use of computers to handle these problems and examine the range of activities for which computer processing could provide aid. Since automation always brings…

  7. Measuring the Performance of Document Supply Systems.

    ERIC Educational Resources Information Center

    Line, Maurice B.

    Produced by Unesco as part of its program designed to help member states develop national information systems, including libraries, information services, and archives, this manual is a guide to document supply measurement techniques that are applicable to a wide range of countries. The first of seven chapters considers the objectives, nature, and…

  8. Accountability Systems: Performance Standards and Assessment.

    ERIC Educational Resources Information Center

    Rahn, Mikala L.; Holmes, Patricia

    1999-01-01

    This monograph provides a status report on issues related to accountability, including standards and assessments, data systems, and the role of incentives for schools, teachers, and students in improving student achievement. Using information gathered from the literature and interviews with state administrators of vocational education, this paper…

  9. PERFORMANCE EVALUATION OF THE DUAL DIGESTION SYSTEM

    EPA Science Inventory

    The dual digestion system (DDS) was developed to provide stabilized, pathogen free sludge. DDS consists of a 1-day detention time, pure-oxygen, covered aerobic digester (Step I) followed by an 8-day detention time anaerobic reactor. The temperature in the Step I digester is contr...

  10. A Design of Electronic Performance Support Systems.

    ERIC Educational Resources Information Center

    Sheu, Feng-Ru

    The project described in this paper, representing the initial phases of a one-year on-going project, was organized to build a supportive environment for Instructional Systems Technology (IST) doctoral students at Indiana University-Bloomington to help them prepare for the Qualifying exams. An overview is provided of steps taken to create an…

  11. Damage-Mitigating Control of Space Propulsion Systems for High Performance and Extended Life

    NASA Technical Reports Server (NTRS)

    Ray, Asok; Wu, Min-Kuang

    1994-01-01

    A major goal in the control of complex mechanical system such as spacecraft rocket engine's advanced aircraft, and power plants is to achieve high performance with increased reliability, component durability, and maintainability. The current practice of decision and control systems synthesis focuses on improving performance and diagnostic capabilities under constraints that often do not adequately represent the materials degradation. In view of the high performance requirements of the system and availability of improved materials, the lack of appropriate knowledge about the properties of these materials will lead to either less than achievable performance due to overly conservative design, or over-straining of the structure leading to unexpected failures and drastic reduction of the service life. The key idea in this report is that a significant improvement in service life could be achieved by a small reduction in the system dynamic performance. The major task is to characterize the damage generation process, and then utilize this information in a mathematical form to synthesize a control law that would meet the system requirements and simultaneously satisfy the constraints that are imposed by the material and structural properties of the critical components. The concept of damage mitigation is introduced for control of mechanical systems to achieve high performance with a prolonged life span. A model of fatigue damage dynamics is formulated in the continuous-time setting, instead of a cycle-based representation, for direct application to control systems synthesis. An optimal control policy is then formulated via nonlinear programming under specified constraints of the damage rate and accumulated damage. The results of simulation experiments for the transient upthrust of a bipropellant rocket engine are presented to demonstrate efficacy of the damage-mitigating control concept.

  12. How to Construct a Successful Performance Appraisal System.

    ERIC Educational Resources Information Center

    Schneier, Craig Eric; And Others

    1986-01-01

    Discusses the design of a performance management system that not only enables managers to solve performance problems, but also enables human resource development specialists and staff to provide a useful tool and a successful program. (CT)

  13. Analysis of Aurora's Performance Simulation Engine for Three Systems

    SciTech Connect

    Freeman, Janine; Simon, Joseph

    2015-07-07

    Aurora Solar Inc. is building a cloud-based optimization platform to automate the design, engineering, and permit generation process of solar photovoltaic (PV) installations. They requested that the National Renewable Energy Laboratory (NREL) validate the performance of the PV system performance simulation engine of Aurora Solar’s solar design platform, Aurora. In previous work, NREL performed a validation of multiple other PV modeling tools 1, so this study builds upon that work by examining all of the same fixed-tilt systems with available module datasheets that NREL selected and used in the aforementioned study. Aurora Solar set up these three operating PV systems in their modeling platform using NREL-provided system specifications and concurrent weather data. NREL then verified the setup of these systems, ran the simulations, and compared the Aurora-predicted performance data to measured performance data for those three systems, as well as to performance data predicted by other PV modeling tools.

  14. Performance of a dynamic atmosphere generation system

    SciTech Connect

    Nano, G.; Borroni, A.; Mazza, B.

    1987-09-01

    A controlled test atmosphere system for gaseous pollutants was designed and constructed. For a reliable characterization of indoor air pollution, a suitable set of sampling and analysis procedures has to be devised and accomplished. The precision and accuracy of the measurements must be determined exactly for a correct interpretation of the results. The two main difficulties appear to be the actual generation of the individual standard and the preparations of physico-chemically thoroughly characterized mixtures. This system utilized two methods for generation of dynamic standards: permeation tubes and gas saturators. Special care also was devoted to the achievement of both a good time stability of the concentration of the standard mixtures and a satisfactory agreement between expected and measured concentration values.

  15. Lift system and fan performance of air cushion supported vehicles

    NASA Astrophysics Data System (ADS)

    Moran, D. D.; Jennings, A. N.

    1982-02-01

    An analysis of the AALC JEFF lift systems and fans from the viewpoints of performance and structural design is performed. A summary of performance data related to the JEFF lift systems is presented, and suggested approaches for JEFF (A) lift fan design, for which these data provided the baseline information, are provided. Published methods of scaling fan performance data from model to full-scale are evaluated. Finally, the structural design characteristics of the JEFF fans are discussed.

  16. Optoelectronic retinal prosthesis: system design and performance

    NASA Astrophysics Data System (ADS)

    Loudin, J. D.; Simanovskii, D. M.; Vijayraghavan, K.; Sramek, C. K.; Butterwick, A. F.; Huie, P.; McLean, G. Y.; Palanker, D. V.

    2007-03-01

    The design of high-resolution retinal prostheses presents many unique engineering and biological challenges. Ever smaller electrodes must inject enough charge to stimulate nerve cells, within electrochemically safe voltage limits. Stimulation sites should be placed within an electrode diameter from the target cells to prevent 'blurring' and minimize current. Signals must be delivered wirelessly from an external source to a large number of electrodes, and visual information should, ideally, maintain its natural link to eye movements. Finally, a good system must have a wide range of stimulation currents, external control of image processing and the option of either anodic-first or cathodic-first pulses. This paper discusses these challenges and presents solutions to them for a system based on a photodiode array implant. Video frames are processed and imaged onto the retinal implant by a head-mounted near-to-eye projection system operating at near-infrared wavelengths. Photodiodes convert light into pulsed electric current, with charge injection maximized by applying a common biphasic bias waveform. The resulting prosthesis will provide stimulation with a frame rate of up to 50 Hz in a central 10° visual field, with a full 30° field accessible via eye movements. Pixel sizes are scalable from 100 to 25 µm, corresponding to 640-10 000 pixels on an implant 3 mm in diameter.

  17. THE DESIGN OF PERFORMANCE MONITORING SYSTEMS IN HEALTHCARE ORGANIZATIONS: A STAKEHOLDER PERSPECTIVE.

    PubMed

    Rouhana, Rima E; Van Caillie, Didier

    2016-01-01

    Monitoring hospitals performance is evolving over time in search of more efficiency by integrating additional levels of care, reducing costs and keeping staff up-to-date. To fulfill these three potentially divergent aspects and to monitor performance, healthcare administrators are using dissimilar management control tools. To explain why, we suggest to go beyond traditional contingent factors to assess the role of the different stakeholders that are at the heart of any healthcare organization. We rely first on seminal studies to appraise the role of the main healthcare players and their influence on some organizational attributes. We then consider the managerial awareness and the perception of a suitable management system to promote a strategy-focused organization. Our methodology is based on a qualitative approach of twenty-two case studies, led in two heterogeneous environments (Belgium and Lebanon), comparing the managerial choice of a management system within three different healthcare organizational structures. Our findings allow us to illustrate, for each healthcare player, his positioning within the healthcare systems. Thus, we define how his role, perception and responsiveness manipulate the organization's internal climate and shape the design of the performance monitoring systems. In particular, we highlight the managerial role and influence on the choice of an adequate management system. PMID:27169164

  18. Model development and system performance optimization for staring infrared search and track (IRST) sensors

    NASA Astrophysics Data System (ADS)

    Olson, Craig; Theisen, Michael; Pace, Teresa; Halford, Carl; Driggers, Ronald

    2016-05-01

    The mission of an Infrared Search and Track (IRST) system is to detect and locate (sometimes called find and fix) enemy aircraft at significant ranges. Two extreme opposite examples of IRST applications are 1) long range offensive aircraft detection when electronic warfare equipment is jammed, compromised, or intentionally turned off, and 2) distributed aperture systems where enemy aircraft may be in the proximity of the host aircraft. Past IRST systems have been primarily long range offensive systems that were based on the LWIR second generation thermal imager. The new IRST systems are primarily based on staring infrared focal planes and sensors. In the same manner that FLIR92 did not work well in the design of staring infrared cameras (NVTherm was developed to address staring infrared sensor performance), current modeling techniques do not adequately describe the performance of a staring IRST sensor. There are no standard military IRST models (per AFRL and NAVAIR), and each program appears to perform their own modeling. For this reason, L-3 has decided to develop a corporate model, working with AFRL and NAVAIR, for the analysis, design, and evaluation of IRST concepts, programs, and solutions. This paper provides some of the first analyses in the L-3 IRST model development program for the optimization of staring IRST sensors.

  19. The performance and efficiency of four motor/controller/battery systems for the simpler electric vehicles

    NASA Technical Reports Server (NTRS)

    Shipps, P. R.

    1980-01-01

    A test and analysis program performed on four complete propulsion systems for an urban electric vehicle (EV) is described and results given. A dc series motor and a permanent magnet (PM) motor were tested, each powered by an EV battery pack and controlled by (1) a series/parallel voltage-switching (V-switch) system; and (2) a system using a pulse width modulation, 400 Hz transistorized chopper. Dynamometer tests were first performed, followed by eV performance predictions and data correlating road tests. During dynamometer tests using chopper control; current, voltage, and power were measured on both the battery and motor sides of the chopper, using three types of instrumentation. Conventional dc instruments provided adequate accuracy for eV power and energy measurements, when used on the battery side of the controller. When using the chopper controller, the addition of a small choke inductor improved system efficiency in the lower duty cycle range (some 8% increase at 50% duty cycle) with both types of motors. Overall system efficiency rankings during road tests were: (1) series motor with V-switch; (2) PM motor with V-switch; (3) series motor with chopper; and (4) PM motor with chopper. Chopper control of the eV was smoother and required less driver skill than V-switch control.

  20. Second law performance of thermoacoustic systems

    NASA Astrophysics Data System (ADS)

    Paek, Insu; Braun, James E.; Mongeau, Luc

    2005-09-01

    Thermoacoustic cooler prototypes developed so far can be divided into three categories based on their cold-side operating temperatures: cryogenic, refrigeration, and the third is the air-conditioning. For most prototypes developed so far, the coefficient of performance (COP), defined as the cooling power divided by the acoustic power, was well above unity. The thermodynamic second law efficiency, defined as the COP to the reversible COP, however, varied between 0.03 and 0.22 for different prototypes. The objective of this work was to evaluate the best application area for thermoacoustic cooling from the point of view of the thermodynamic second law efficiency. Model predictions in conjunction with empirical heat transfer correlation models for thermoacoustic environments were used. The results suggest that refrigeration applications are better suited for thermoacoustic cooling than cryogenics or air-conditioning.

  1. Abi Cooler System Flight Module Performance

    NASA Astrophysics Data System (ADS)

    Colbert, R.; Pruitt, G.; Nguyen, T.; Raab, J.

    2010-04-01

    Northrop Grumman provides a long-life, low mass, efficient two-stage pulse tube cooler for the Advanced Baseline Imager (ABI) to be flown on NOAA's GOES R spacecraft. This two-stage cooler design is one of a family of one and multi-stage pulse tube cooler products developed by Northrop Grumman that provides two separate cryogenic interface temperatures with an integral HEC pulse tube cooler and a remote coaxial cold head. The two-stage cold head for ABI was designed to provide simultaneous large cooling power at 53 K and 183 K. This paper summarizes the data collected on the Flight Module (FM) coolers during acceptance testing. Tests conducted on the FM coolers included applied vibration, survival at non-operational temperature extremes, thermal performance measurements over a range of operational temperatures, as well as temperature stability tests. Designed for a 10-year life, the ABI coolers have the capability to provide 1.9-2.3 W of cooling at 53 K, and between 5.1 W and 8.0 W of cooling at 183 K; while rejecting to 300 K with less than 186 W of input power to the cooler control electronics. The ABI Flight Module coolers, on average, met the cooling capability at 53 K and 183 K with average input power levels of 169 W, a performance margin of roughly 9%. All coolers demonstrated short term stability of less than 73 mKp-p and long term temperature stability of less than 83 mKp-p. These Flight Module coolers represent the full complement of coolers delivered to the ABI Program. All critical FM cooler delivery milestones were met over the course of this program.

  2. Analysis of Dynamic Performances for Servo Drive Hydraulic System

    NASA Astrophysics Data System (ADS)

    Yang, Jianxi; Wang, Liying; Huang, Jian

    Based on the servo drive hydraulic of system, using MATLAB/Simulink software in this paper, the impacts on system dynamic performances are analyzed and simulated of all the parameters (structure parameters J, Dp, and mechanism parameters A1, α, k, V1 CP). According to the relation curve of the main systematic characteristics and dynamic performances obtained from the simulations, it provides advantages for system dynamic performance improvements. The simulation results indicate that dynamic performances can be improved through the reasonable selection of the system structural parameters. Also it laid the theoretical foundation for further study on energy saving of hydraulic injection machine.

  3. The architecture of the High Performance Storage System (HPSS)

    NASA Technical Reports Server (NTRS)

    Teaff, Danny; Watson, Dick; Coyne, Bob

    1994-01-01

    The rapid growth in the size of datasets has caused a serious imbalance in I/O and storage system performance and functionality relative to application requirements and the capabilities of other system components. The High Performance Storage System (HPSS) is a scalable, next-generation storage system that will meet the functionality and performance requirements or large-scale scientific and commercial computing environments. Our goal is to improve the performance and capacity of storage by two orders of magnitude or more over what is available in the general or mass marketplace today. We are also providing corresponding improvements in architecture and functionality. This paper describes the architecture and functionality of HPSS.

  4. Machine Maintenance Integrated Performance Support System

    SciTech Connect

    Bohley, M.C.; Schwartz, M.E.

    1998-03-11

    The objectives of this partnership project were to develop a preventive maintenance checklist program, a troubleshooting system for the Vertical Turning Center (VTC)-5, an on-line manual, and to integrate these components with a custom browser that would run on the VTC-5 machine's controller and would support future internet/intranet delivery. Kingsbury provided subject matter experts from engineering, manufacturing, and technical support. They also provided photographs, schematics, and CAD drawings, which AlliedSignal Federal Manufacturing and Technologies (ASFM and T) digitized for use in the final program. Information from The Kingsbury troubleshooting experts were interviewed regarding symptoms and root causes of system malfunctions This knowledge was captured and from it, fault trees were developed. These trees were then incorporated into the EPSS as a troubleshooting tool. The troubleshooting portion of the system presents simple questions to the machine operator in order to determine the likely cause or causes of malfunctions and then recommends systematic corrective actions. The on-line reference manual, covering operations and maintenance, provides text and illustrations to the machine operator in a traditional structure, but additionally offers the capability to search voluminous amounts of technical data and retrieve specific information on request. The maintenance portion of the EPSS includes checklists that are displayed daily, weekly, monthly, and annually, as appropriate, on the VTC-5 controller screen. The controller software is unavailable for machining parts until the machine tool operator goes through and checks off all of the checklist items. This project provided the team with a detailed understanding of the knowledge and information required to produce and support advanced machine tools. In addition, it resulted in the design and construction of a prototype VTC-5 EPSS containing all the logic and interfaces necessary to integrate operations

  5. The high performance storage system (HPSS)

    SciTech Connect

    Kliewer, K.L.

    1995-12-31

    Ever more powerful computers and rapidly enlarging data sets require unprecedented levels of data storage and access capabilities. To help meet these requirements, the scalable, network-centered, parallel storage system HPSS was designed and is now being developed. The parallel 1/0 architecture, mechanisms, strategies and capabilities are described. The current development status and the broad applicability are illustrated through a discussion of the sites at which HPSS is now being implemented, representing a spectrum of computing environments. Planned capabilities and time scales will be provided. Some of the remarkable developments in storage media data density looming on the horizon will also be noted.

  6. STARPAHC systems report. Volume 2: Operational performance

    NASA Technical Reports Server (NTRS)

    1977-01-01

    The Space Technology Applied to Rural Papago Advanced Health Care (STARPAHC) demonstrated the value and potential of telemedicine using physician's assistants for providing quality health care delivery to people in a remote area. Generally, the program's achievements were to: (1) establish the feasibility of the STARPAHC concept in the delivery of health care; (2) gain information for developing health care systems for future manned spacecraft; (3) determine the constraints and capabilities involved in the interaction between physicians and non-physician health care personnel; (4) determine effectiveness of the STARPAHC technique; and (5) define the additional developments that are needed and/or most valuable to improving telemedicine and its exportable potential.

  7. Skylab systems flight performance - An interim report

    NASA Technical Reports Server (NTRS)

    Belew, L. F.

    1973-01-01

    An unmanned Skylab space station was launched on May 14, 1973. The space station was inserted into a near-circular earth orbit of approximately 435 kilometers altitude. Initial difficulties with Skylab are reported together with the steps taken to overcome these difficulties. The first crew made its rendezvous with Skylab on May 25. A Skylab description is given and a systems overview is presented. Skylab attitude requirements are discussed together with details of attitude control, the communications network, scientific investigations, student experiments, earth resources studies, weather studies, solar observations, biomedical investigations, technology investigations, crew mobility and effectiveness investigations, habitability assessments, and a comet observation.

  8. Apollo 14 flight support and system performance

    NASA Technical Reports Server (NTRS)

    Rice, R. R.

    1971-01-01

    The Apollo 13 incident and subsequent oxygen tank redesign for Apollo 14 placed unique requirements on the flight support activity. A major part of this activity was the integration of the various analytical efforts into a single team function. Additionally, the first flight of the redesigned system without an orbital test required an extensive analytical base. The support team philosophy, objectives, and organization are presented. Various analytical tools that were used during the flight are discussed. Investigations made during the postflight period are considered and their impact upon subsequent flights shown.

  9. Understanding the dynamic interactions driving Zambian health centre performance: a case-based health systems analysis

    PubMed Central

    Topp, Stephanie M; Chipukuma, Julien M; Hanefeld, Johanna

    2015-01-01

    Background Despite being central to achieving improved population health outcomes, primary health centres in low- and middle-income settings continue to underperform. Little research exists to adequately explain how and why this is the case. This study aimed to test the relevance and usefulness of an adapted conceptual framework for improving our understanding of the mechanisms and causal pathways influencing primary health centre performance. Methods A theory-driven, case-study approach was adopted. Four Zambian health centres were purposefully selected with case data including health-care worker interviews (n = 60); patient interviews (n = 180); direct observation of facility operations (2 weeks/centre) and key informant interviews (n = 14). Data were analysed to understand how the performance of each site was influenced by the dynamic interactions between system ‘hardware’ and ‘software’ acting on mechanisms of accountability. Findings Structural constraints including limited resources created challenging service environments in which work overload and stockouts were common. Health workers’ frustration with such conditions interacted with dissatisfaction with salary levels eroding service values and acting as a catalyst for different forms of absenteeism. Such behaviours exacerbated patient–provider ratios and increased the frequency of clinical and administrative shortcuts. Weak health information systems and lack of performance data undermined providers’ answerability to their employer and clients, and a lack of effective sanctions undermined supervisors’ ability to hold providers accountable for these transgressions. Weak answerability and enforceability contributed to a culture of impunity that masked and condoned weak service performance in all four sites. Conclusions Health centre performance is influenced by mechanisms of accountability, which are in turn shaped by dynamic interactions between system hardware and system software. Our

  10. Improving Fan System Performance: A Sourcebook for Industry

    SciTech Connect

    2003-04-01

    This is one of a series of sourcebooks on motor-driven equipment produced by the Industrial Technologies Program. It provides a reference for industrial fan systems users, outlining opportunities to improve fan system performance.

  11. NREL PV System Performance and Standards Technical Progress

    SciTech Connect

    Osterwald, C. R.

    2005-01-01

    This paper presents a brief overview of the status and accomplishments during Fiscal Year (FY)2004 of the Photovoltaic (PV) System Performance & Standards Subtask, which is part of PV Systems Engineering Project (a joint NREL-Sandia project).

  12. Fenestration System Performance Research, Testing, and Evaluation

    SciTech Connect

    Jim Benney

    2009-11-30

    The US DOE was and is instrumental to NFRC's beginning and its continued success. The 2005 to 2009 funding enables NFRC to continue expanding and create new, improved ratings procedures. Research funded by the US DOE enables increased fenestration energy rating accuracy. International harmonization efforts supported by the US DOE allow the US to be the global leader in fenestration energy ratings. Many other governments are working with the NFRC to share its experience and knowledge toward development of their own national fenestration rating process similar to the NFRC's. The broad and diverse membership composition of NFRC allows anyone with a fenestration interest to come forward with an idea or improvement to the entire fenestration community for consideration. The NFRC looks forward to the next several years of growth while remaining the nation's resource for fair, accurate, and credible fenestration product energy ratings. NFRC continues to improve its rating system by considering new research, methodologies, and expanding to include new fenestration products. Currently, NFRC is working towards attachment energy ratings. Attachments are blinds, shades, awnings, and overhangs. Attachments may enable a building to achieve significant energy savings. An NFRC rating will enable fair competition, a basis for code references, and a new ENERGY STAR product category. NFRC also is developing rating methods to consider non specular glazing such as fritted glass. Commercial applications frequently use fritted glazing, but no rating method exists. NFRC is testing new software that may enable this new rating and contribute further to energy conservation. Around the world, many nations are seeking new energy conservation methods and NFRC is poised to harmonize its rating system assisting these nations to better manage and conserve energy in buildings by using NFRC rated and labeled fenestration products. As this report has shown, much more work needs to be done to

  13. Laboratory performance of a dynamic ice storage system

    SciTech Connect

    Stovall, T.K.; Tomlinson, J.J.

    1991-06-01

    The performance of a commercial 30-ton dynamic ice storage system was measured in a dedicated laboratory test facility and the results analyzed. The ice storage system was tested over a wide range of operating conditions to characterize the ice generating performance as a function of condensing conditions, ice build time, and defrost time. The overall efficiency of ice production was determined and the effect of refrigeration system component performance on the overall system efficiency was evaluated. The ability of the charged system -- a tank of ice slush -- to meet a simulated cooling load over was also evaluated. 18 refs., 9 figs.

  14. Performance model assessment for multi-junction concentrating photovoltaic systems.

    SciTech Connect

    Stein, Joshua S.; Riley, Daniel M.; McConnell, Robert.; Sahm, Aaron; Crawford, Clark; King, David L.; Cameron, Christopher P.; Foresi, James S.

    2010-03-01

    Four approaches to modeling multi-junction concentrating photovoltaic system performance are assessed by comparing modeled performance to measured performance. Measured weather, irradiance, and system performance data were collected on two systems over a one month period. Residual analysis is used to assess the models and to identify opportunities for model improvement. Large photovoltaic systems are typically developed as projects which supply electricity to a utility and are owned by independent power producers. Obtaining financing at favorable rates and attracting investors requires confidence in the projected energy yield from the plant. In this paper, various performance models for projecting annual energy yield from Concentrating Photovoltaic (CPV) systems are assessed by comparing measured system output to model predictions based on measured weather and irradiance data. The results are statistically analyzed to identify systematic error sources.

  15. Systems engineering approach towards performance monitoring of emergency diesel generator

    NASA Astrophysics Data System (ADS)

    Ramli, Nurhayati; Yong-kwan, Lee

    2014-02-01

    Systems engineering is an interdisciplinary approach and means to enable the realization of successful systems. In this study, systems engineering approach towards the performance monitoring of Emergency Diesel Generator (EDG) is presented. Performance monitoring is part and parcel of predictive maintenance where the systems and components conditions can be detected before they result into failures. In an effort to identify the proposal for addressing performance monitoring, the EDG boundary has been defined. Based on the Probabilistic Safety Analysis (PSA) results and industry operating experiences, the most critical component is identified. This paper proposed a systems engineering concept development framework towards EDG performance monitoring. The expected output of this study is that the EDG reliability can be improved by the performance monitoring alternatives through the systems engineering concept development effort.

  16. Systems engineering approach towards performance monitoring of emergency diesel generator

    SciTech Connect

    Ramli, Nurhayati Yong-kwan, Lee

    2014-02-12

    Systems engineering is an interdisciplinary approach and means to enable the realization of successful systems. In this study, systems engineering approach towards the performance monitoring of Emergency Diesel Generator (EDG) is presented. Performance monitoring is part and parcel of predictive maintenance where the systems and components conditions can be detected before they result into failures. In an effort to identify the proposal for addressing performance monitoring, the EDG boundary has been defined. Based on the Probabilistic Safety Analysis (PSA) results and industry operating experiences, the most critical component is identified. This paper proposed a systems engineering concept development framework towards EDG performance monitoring. The expected output of this study is that the EDG reliability can be improved by the performance monitoring alternatives through the systems engineering concept development effort.

  17. Performance of Integrated Systems of Automated Roller Shade Systems and Daylight Responsive Dimming Systems

    SciTech Connect

    Park, Byoung-Chul; Choi, An-Seop; Jeong, Jae-Weon; Lee, Eleanor S.

    2010-07-08

    Daylight responsive dimming systems have been used in few buildings to date because they require improvements to improve reliability. The key underlying factor contributing to poor performance is the variability of the ratio of the photosensor signal to daylight workplane illuminance in accordance with sun position, sky condition, and fenestration condition. Therefore, this paper describes the integrated systems between automated roller shade systems and daylight responsive dimming systems with an improved closed-loop proportional control algorithm, and the relative performance of the integrated systems and single systems. The concept of the improved closed-loop proportional control algorithm for the integrated systems is to predict the varying correlation of photosensor signal to daylight workplane illuminance according to roller shade height and sky conditions for improvement of the system accuracy. In this study, the performance of the integrated systems with two improved closed-loop proportional control algorithms was compared with that of the current (modified) closed-loop proportional control algorithm. In the results, the average maintenance percentage and the average discrepancies of the target illuminance, as well as the average time under 90percent of target illuminance for the integrated systems significantly improved in comparison with the current closed-loop proportional control algorithm for daylight responsive dimming systems as a single system.

  18. INTERIOR DUCT SYSTEM DESIGN, CONSTRUCTION, AND PERFORMANCE

    SciTech Connect

    Janet E.R. Mcllvaine; David Beal; Philip Fairey

    2001-10-10

    By removing air distribution and conditioning equipment from unconditioned spaces, homeowners stand to benefit substantially with respect to both energy savings and indoor air quality. Duct leakage introduces: Greater heating and cooling loads from air at extreme temperatures and humidity levels; Outside air and air from unconditioned spaces that may contain air borne contaminants, combustion gases, pollen, mold spores, and/or particles of building materials; and Higher whole-house infiltration/exfiltration rates. Exemplary studies conducted since 1990 have demonstrated the prevalence of duct leakage throughout the United States and measured energy savings of approximately 20% during both heating and cooling seasons from leakage reduction. These all dealt with duct leakage to and/or from unconditioned spaces. In the building science community, leakage within the conditioned space is generally presumed to eliminate the negative consequences of duct leakage with the exception of possibly creating pressure imbalances in the house which relates to higher infiltration and/or exfiltration. The practical challenges of isolating ducts and air handlers from unconditioned spaces require builders to construct an air-tight environment for the ducts. Florida Solar Energy Center researchers worked with four builders in Texas, North Carolina, and Florida who build a furred-down chase located either in a central hallway or at the edges of rooms as an architectural detail. Some comparison homes with duct systems in attics and crawl spaces were included in the test group of more than 20 homes. Test data reveals that all of the duct/AHU systems built inside the conditioned space had lower duct leakage to unconditioned spaces than their conventional counterparts; however, none of the homes was completely free of duct leakage to unconditioned spaces. Common problems included wiring and plumbing penetrations of the chase, failure to treat the chase as an air tight space, and misguided

  19. High performance solar desiccant cooling system: Performance evaluation and research recommendations

    NASA Astrophysics Data System (ADS)

    Schlepp, D. R.; Schultz, K. J.

    1984-09-01

    The current status of solar desiccant cooling was assessed and recommendations were made for continued research to develop high performance systems competitive with conventional cooling systems. Solid desiccant, liquid desiccant, and hybrid systems combining desiccant dehumidifiers with vapor compressor units are considered. Currently, all desiccant systems fall somewhat short of being competitive with conventional systems. Hybrid systems appear to have the greatest potential in the short term. Solid systems are close to meeting performance goals. Development of high performance solid desiccant dehumidifiers based on parallel passage designs should be pursued. Liquid system collector/generators and efficient absorbers should receive attention. Model development is also indicated. Continued development by hybrid systems is directly tied to the above work.

  20. HVAC system performance and indoor air quality

    SciTech Connect

    Newman, J.L. )

    1991-01-01

    This paper reports that in the mid-seventies, the American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE) promulgated ASHRAE Standard 90-75 Energy Conservation in New Building Design, which called for revised minimum ventilation rates and the elimination of energy-wasting HVAC systems. Most building codes which cover energy conservation in the late seventies and eighties referred to this standard. This lowering of ventilation rates, coupled with the tighter building envelope (walls, windows, doors and roof) led to a reduction in outside air, both by engineering design and by minimizing infiltration through the structure. The minimum ventilation rates are based on the assumption that average concentrations of tobacco smoke exist in all enclosed spaces (30 percent of the population being smokers at two cigarettes per hour), rather than having separate rates for smoking and nonsmoking areas, as in the 1981 revision of the Standard. If tobacco smoke is ever declared a carcinogen, it will undoubtedly prompt a review of Standard 62-1989, as well as hasten totally smoke-free buildings.

  1. Performance of a Nanometer Resolution BPM System

    SciTech Connect

    Vogel, V; Hayano, H; Honda, Y; Terunuma, N; Urakawa, J; Kolomensky, Y; Orimoto, T; Chung, C; Fitsos, P; Gronberg, J; Walston, S; White, G; Frisch, J; May, J; McCormick, D; Ross, M; Smith, S; Smith, T; Slater, M; Ward, D; Boogert, S; Lyapin, A; Malton, S; Miller, D

    2005-10-14

    International Linear Collider (ILC) interaction region beam sizes and component position stability requirements will be as small as a few nanometers. it is important to the ongoing ILC design effort to demonstrate that these tolerances can be achieved--ideally using beam-based stability measurements. It has been estimated that an RF cavity BPM with modern waveform processing could provide a position measurement resolution of less than one nanometer. Such a system could form the basis of the desired beam-based stability measurement, as well as be used for other specialized purposes. They have developed a high resolution RF cavity BPM and associated electronics. A triplet comprised of these BPMs has been installed in the extraction line of the KEK Accelerator Test Facility (ATF) for testing with its ultra-low emittance beam. The three BPMs are rigidly mounted inside an alignment frame on six variable-length struts which can be used to move the BPMs in position and angle. they have developed novel methods for extracting the position and tilt information from the BPM signals including a robust calibration algorithm which is immune to beam jitter. To date, they have been able to demonstrate a resolution of approximately 20 nm over a dynamic range of {+-} 20 {micro}m. They report on the progress of these ongoing tests.

  2. PERFORMANCE OF A NANOMETER RESOLUTION BPM SYSTEM

    SciTech Connect

    Walston, S; Chung, C; Fitsos, P; Gronberg, J; Meller, R; Vogel, V; Hayano, H; Honda, Y; Terunuma, N; Urakawa, J; Kolomensky, Y; Orimoto, T; Boogert, S; Frisch, J; May, J; McCormick, D; Ross, M; Smith, S; Smith, T; Slater, M; Thomson, M; Ward, D; Lyapin, A; Malton, S; Miller, D; White, G

    2006-06-21

    International Linear Collider (ILC) interaction region beam sizes and component position stability requirements will be as small as a few nanometers. It is important to the ILC design effort to demonstrate that these tolerances can be achieved--ideally using beam-based stability measurements. It has been estimated that RF cavity beam position monitors (BPMs) could provide position measurement resolutions of less than one nanometer and could form the basis of the desired beam-based stability measurement. We have developed a high resolution RF cavity BPM system. A triplet of these BPMs has been installed in the extraction line of the KEK Accelerator Test Facility (ATF) for testing with its ultra-low emittance beam. The three BPMs are rigidly mounted inside an alignment frame on variable-length struts which allow movement in position and angle. We have developed novel methods for extracting the position and tilt information from the BPM signals including a calibration algorithm which is immune to beam jitter. To date, we have been able to demonstrate a resolution of approximately 20 nm over a dynamic range of +/- 20 microns. We report on the progress of these ongoing tests.

  3. Performance of a Nanometer Resolution BPM System

    SciTech Connect

    Walston, S.; Chung, C.; Fitsos, P.; Gronberg, J.; Meller, R.; Vogel, V.; Hayano, H.; Honda, Y.; Terunuma, N.; Urakawa, J.; Kolomensky, Y.; Orimoto, T.; Boogert, S.; Frisch, J.; May, J.; McCormick, D.; Ross, M.; Smith, S.; Smith, T.; White, G.; Slater, M.; /Cambridge U. /University Coll. London

    2007-04-24

    International Linear Collider (ILC) interaction region beam sizes and component position stability requirements will be as small as a few nanometers. It is important to the ILC design effort to demonstrate that these tolerances can be achieved ideally using beam-based stability measurements. It has been estimated that RF cavity beam position monitors (BPMs) could provide position measurement resolutions of less than one nanometer and could form the basis of the desired beam-based stability measurement. We have developed a high resolution RF cavity BPM system. A triplet of these BPMs has been installed in the extraction line of the KEK Accelerator Test Facility (ATF) for testing with its ultra-low emittance beam. The three BPMs are rigidly mounted inside an alignment frame on variable-length struts which allow movement in position and angle. We have developed novel methods for extracting the position and tilt information from the BPM signals including a calibration algorithm which is immune to beam jitter. To date, we have been able to demonstrate a resolution of approximately 20 nm over a dynamic range of +/- 20 microns. We report on the progress of these ongoing tests.

  4. Technologies of high-performance thermography systems

    NASA Astrophysics Data System (ADS)

    Breiter, R.; Cabanski, Wolfgang A.; Mauk, K. H.; Kock, R.; Rode, W.

    1997-08-01

    A family of 2 dimensional detection modules based on 256 by 256 and 486 by 640 platinum silicide (PtSi) focal planes, or 128 by 128 and 256 by 256 mercury cadmium telluride (MCT) focal planes for applications in either the 3 - 5 micrometer (MWIR) or 8 - 10 micrometer (LWIR) range was recently developed by AIM. A wide variety of applications is covered by the specific features unique for these two material systems. The PtSi units provide state of the art correctability with long term stable gain and offset coefficients. The MCT units provide extremely fast frame rates like 400 Hz with snapshot integration times as short as 250 microseconds and with a thermal resolution NETD less than 20 mK for e.g. the 128 by 128 LWIR module. The unique design idea general for all of these modules is the exclusively digital interface, using 14 bit analog to digital conversion to provide state of the art correctability, access to highly dynamic scenes without any loss of information and simplified exchangeability of the units. Device specific features like bias voltages etc. are identified during the final test and stored in a memory on the driving electronics. This concept allows an easy exchange of IDCAs of the same type without any need for tuning or e.g. the possibility to upgrade a PtSi based unit to an MCT module by just loading the suitable software. Miniaturized digital signal processor (DSP) based image correction units were developed for testing and operating the units with output data rates of up to 16 Mpixels/s. These boards provide the ability for freely programmable realtime functions like two point correction and various data manipulations in thermography applications.

  5. Quantifying dose to the reconstructed breast: Can we adequately treat?

    SciTech Connect

    Chung, Eugene; Marsh, Robin B.; Griffith, Kent A.; Moran, Jean M.; Pierce, Lori J.

    2013-04-01

    To evaluate how immediate reconstruction (IR) impacts postmastectomy radiotherapy (PMRT) dose distributions to the reconstructed breast (RB), internal mammary nodes (IMN), heart, and lungs using quantifiable dosimetric end points. 3D conformal plans were developed for 20 IR patients, 10 autologous reconstruction (AR), and 10 expander-implant (EI) reconstruction. For each reconstruction type, 5 right- and 5 left-sided reconstructions were selected. Two plans were created for each patient, 1 with RB coverage alone and 1 with RB + IMN coverage. Left-sided EI plans without IMN coverage had higher heart Dmean than left-sided AR plans (2.97 and 0.84 Gy, p = 0.03). Otherwise, results did not vary by reconstruction type and all remaining metrics were evaluated using a combined AR and EI dataset. RB coverage was adequate regardless of laterality or IMN coverage (Dmean 50.61 Gy, D95 45.76 Gy). When included, IMN Dmean and D95 were 49.57 and 40.96 Gy, respectively. Mean heart doses increased with left-sided treatment plans and IMN inclusion. Right-sided treatment plans and IMN inclusion increased mean lung V{sub 20}. Using standard field arrangements and 3D planning, we observed excellent coverage of the RB and IMN, regardless of laterality or reconstruction type. Our results demonstrate that adequate doses can be delivered to the RB with or without IMN coverage.

  6. Purchasing a cycle helmet: are retailers providing adequate advice?

    PubMed Central

    Plumridge, E.; McCool, J.; Chetwynd, J.; Langley, J. D.

    1996-01-01

    OBJECTIVES: The aim of this study was to examine the selling of cycle helmets in retail stores with particular reference to the adequacy of advice offered about the fit and securing of helmets. METHODS: All 55 retail outlets selling cycle helmets in Christchurch, New Zealand were studied by participant observation. A research entered each store as a prospective customer and requested assistance to purchase a helmet. She took detailed field notes of the ensuing encounter and these were subsequently transcribed, coded, and analysed. RESULTS: Adequate advice for helmet purchase was given in less than half of the stores. In general the sales assistants in specialist cycle shops were better informed and gave more adequate advice than those in department stores. Those who have good advice also tended to be more good advice also tended to be more active in helping with fitting the helmet. Knowledge about safety standards was apparent in one third of sales assistants. Few stores displayed information for customers about the correct fit of cycle helmets. CONCLUSIONS: These findings suggest that the advice and assistance being given to ensure that cycle helmets fit properly is often inadequate and thus the helmets may fail to fulfil their purpose in preventing injury. Consultation between retailers and policy makers is a necessary first step to improving this situation. PMID:9346053

  7. Preliminary Findings on Searcher Performance and Perceptions of Performance in a Hypertext Bibliographic Retrieval System.

    ERIC Educational Resources Information Center

    Wolfram, Dietmar; Dimitroff, Alexandra

    1997-01-01

    Although hypertext system usage has been studied, little research has examined the relationship of searcher performance and perception of performance, particularly for hypertext-based information retrieval systems for bibliographic data. This article reports preliminary findings of a study at the University of Wisconsin-Milwaukee in which 83…

  8. Improved ASTM G72 Test Method for Ensuring Adequate Fuel-to-Oxidizer Ratios

    NASA Technical Reports Server (NTRS)

    Juarez, Alfredo; Harper, Susana A.

    2016-01-01

    The ASTM G72/G72M-15 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment is currently used to evaluate materials for the ignition susceptibility driven by exposure to external heat in an enriched oxygen environment. Testing performed on highly volatile liquids such as cleaning solvents has proven problematic due to inconsistent test results (non-ignitions). Non-ignition results can be misinterpreted as favorable oxygen compatibility, although they are more likely associated with inadequate fuel-to-oxidizer ratios. Forced evaporation during purging and inadequate sample size were identified as two potential causes for inadequate available sample material during testing. In an effort to maintain adequate fuel-to-oxidizer ratios within the reaction vessel during test, several parameters were considered, including sample size, pretest sample chilling, pretest purging, and test pressure. Tests on a variety of solvents exhibiting a range of volatilities are presented in this paper. A proposed improvement to the standard test protocol as a result of this evaluation is also presented. Execution of the final proposed improved test protocol outlines an incremental step method of determining optimal conditions using increased sample sizes while considering test system safety limits. The proposed improved test method increases confidence in results obtained by utilizing the ASTM G72 autogenous ignition temperature test method and can aid in the oxygen compatibility assessment of highly volatile liquids and other conditions that may lead to false non-ignition results.

  9. High Performance Work System, HRD Climate and Organisational Performance: An Empirical Study

    ERIC Educational Resources Information Center

    Muduli, Ashutosh

    2015-01-01

    Purpose: This paper aims to study the relationship between high-performance work system (HPWS) and organizational performance and to examine the role of human resource development (HRD) Climate in mediating the relationship between HPWS and the organizational performance in the context of the power sector of India. Design/methodology/approach: The…

  10. Laser System Technician. A Catalog of Performance Objectives and Performance Guides.

    ERIC Educational Resources Information Center

    Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

    This Vocational-Technical Education Consortium of States (V-TECS) catalog contains the state-of-the-art tasks and standards of performance for the occupation of laser system technician. It provides the curriculum specialist or instructor with the foundation for instructional development. Performance objectives and performance guides are provided…

  11. Building Synergy: The Power of High Performance Work Systems.

    ERIC Educational Resources Information Center

    Gephart, Martha A.; Van Buren, Mark E.

    1996-01-01

    Suggests that high-performance work systems create the synergy that lets companies gain and keep a competitive advantage. Identifies the components of high-performance work systems and critical action steps for implementation. Describes the results companies such as Xerox, Lever Brothers, and Corning Incorporated have achieved by using them. (JOW)

  12. PERFORMANCE EVALUATION OF AN EXISTING SEVEN CELL LAGOON SYSTEM

    EPA Science Inventory

    The general objective of this study was to determine the yearly performance of a seven cell facultative wastewater lagoon system and to compare this performance with existing state and federal discharge standards and with the criteria used to design the lagoon system and to evalu...

  13. 42 CFR 24.7 - Performance appraisal system.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 1 2014-10-01 2014-10-01 false Performance appraisal system. 24.7 Section 24.7 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES PERSONNEL SENIOR BIOMEDICAL RESEARCH SERVICE § 24.7 Performance appraisal system. The members of the Service shall be subject to...

  14. 42 CFR 24.7 - Performance appraisal system.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Performance appraisal system. 24.7 Section 24.7 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES PERSONNEL SENIOR BIOMEDICAL RESEARCH SERVICE § 24.7 Performance appraisal system. The members of the Service shall be subject to...

  15. 42 CFR 24.7 - Performance appraisal system.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Performance appraisal system. 24.7 Section 24.7 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES PERSONNEL SENIOR BIOMEDICAL RESEARCH SERVICE § 24.7 Performance appraisal system. The members of the Service shall be subject to...

  16. 42 CFR 24.7 - Performance appraisal system.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false Performance appraisal system. 24.7 Section 24.7 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES PERSONNEL SENIOR BIOMEDICAL RESEARCH SERVICE § 24.7 Performance appraisal system. The members of the Service shall be subject to...

  17. 42 CFR 24.7 - Performance appraisal system.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 1 2013-10-01 2013-10-01 false Performance appraisal system. 24.7 Section 24.7 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES PERSONNEL SENIOR BIOMEDICAL RESEARCH SERVICE § 24.7 Performance appraisal system. The members of the Service shall be subject to...

  18. C++ and operating systems performance - A case study

    NASA Technical Reports Server (NTRS)

    Russo, Vincent F.; Madany, Peter W.; Campbell, Roy H.

    1990-01-01

    Object-oriented design and programming has many software engineering advantages. Its application to large systems, however, has previously been constrained by performance concerns. The Choices operating system, which has over 75,000 lines of code, is object-oriented and programmed in C++. This paper is a case study of the performance of Choices.

  19. Analysis of a Ubiquitous Performance Support System for Teachers

    ERIC Educational Resources Information Center

    Chen, Chao-Hsiu; Hwang, Gwo-Jen; Yang, Tzu-Chi; Chen, Shih-Hsuan; Huang, Shen-Yu

    2009-01-01

    This paper describes a Ubiquitous Performance Support System for Teachers (UPSST) and its implementation model. Personal Digital Assistants (PDAs) were used as the platform to support high-school teachers. Based on concepts of Electronic Performance Support Systems and design-based research, the authors conducted an iterative process of analysis,…

  20. 48 CFR 642.1503-70 - Contractor Performance System (CPS).

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... CONTRACT MANAGEMENT CONTRACT ADMINISTRATION AND AUDIT SERVICES Contractor Performance Information 642.1503... allowing contracting officers to input past performance information and view past performance information... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Contractor...

  1. 19 CFR 143.5 - System performance requirements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false System performance requirements. 143.5 Section 143... performance requirements. The performance requirements and operational standards for electronic data filing...), which is updated periodically. The User Support Services Division, Customs Headquarters, upon...

  2. Performance study of a heat recovery desiccant cooling system

    NASA Astrophysics Data System (ADS)

    Sabek, Seifennasr; Ben Nasr, Kaouther; Chouikh, Ridha; Guizani, Amenallah

    2015-04-01

    The comparison between the experimental and theoretical simulations of a desiccant cooling system under various climatic conditions (outdoor temperature and relative humidity) on the system performance has been presented. The performance of the system is evaluated using Cooling Capacity (CC) parameter. The system under a typical summer day of hot and humid climate was tested. A remarkable decrease about 40-65% in the specific humidity and with a supply air temperature lower than 25°C of the proposed system was observed. The study is important and helpful to improve the effectiveness of this kind of liquid desiccant system in hot and humid places.

  3. Evaluating Models of Human Performance: Safety-Critical Systems Applications

    NASA Technical Reports Server (NTRS)

    Feary, Michael S.

    2012-01-01

    This presentation is part of panel discussion on Evaluating Models of Human Performance. The purpose of this panel is to discuss the increasing use of models in the world today and specifically focus on how to describe and evaluate models of human performance. My presentation will focus on discussions of generating distributions of performance, and the evaluation of different strategies for humans performing tasks with mixed initiative (Human-Automation) systems. I will also discuss issues with how to provide Human Performance modeling data to support decisions on acceptability and tradeoffs in the design of safety critical systems. I will conclude with challenges for the future.

  4. Cost and performance analysis of physical security systems

    SciTech Connect

    Hicks, M.J.; Yates, D.; Jago, W.H.; Phillips, A.W.

    1998-04-01

    Analysis of cost and performance of physical security systems can be a complex, multi-dimensional problem. There are a number of point tools that address various aspects of cost and performance analysis. Increased interest in cost tradeoffs of physical security alternatives has motivated development of an architecture called Cost and Performance Analysis (CPA), which takes a top-down approach to aligning cost and performance metrics. CPA incorporates results generated by existing physical security system performance analysis tools, and utilizes an existing cost analysis tool. The objective of this architecture is to offer comprehensive visualization of complex data to security analysts and decision-makers.

  5. Three year performance of aluminum alloy galvanic cathodic protection system

    SciTech Connect

    Funahashi, M.; Young, W.T.

    1999-07-01

    A newly developed aluminum alloy galvanic cathodic protection system was installed on selected prestressed concrete piles. The piles were instrumented to measure the aluminum alloy anode performance. To evaluate the new anode, the pure zinc anode was used for the comparison purpose. The anode performance was monitored for the three years since the system was installed in June, 1996. This paper discusses the results of the performance of the new aluminum alloy anode.

  6. The performance of components in the Skylab refrigeration system

    NASA Technical Reports Server (NTRS)

    Daniher, C. E., Jr.

    1975-01-01

    The on-orbit performance of the Skylab refrigeration system components is presented. Flight anomalies are analyzed and performance of the newly developed components is described. Nine months of orbit data proved the practicality of the leak-free coolant system design. Flight proven application of a thermal capacitor and development test results of the first all-mechanical, low temperature mixing valve represent a significant advance in single-phase, low temperature coolant loop design. System flight data suggest that additional instrumentation and fluid filters could have prevented system orbit performance anomalies.

  7. Performance assessment techniques for groundwater recovery and treatment systems

    SciTech Connect

    Kirkpatrick, G.L.

    1993-03-01

    Groundwater recovery and treatment (pump and treat systems) continue to be the most commonly selected remedial technology for groundwater restoration and protection programs at hazardous waste sites and RCRA facilities nationwide. Implementing a typical groundwater recovery and treatment system includes the initial assessment of groundwater quality, characterizing aquifer hydrodynamics, recovery system design, system installation, testing, permitting, and operation and maintenance. This paper focuses on methods used to assess the long-term efficiency of a pump and treat system. Regulatory agencies and industry alike are sensitive to the need for accurate assessment of the performance and success of groundwater recovery systems for contaminant plume abatement and aquifer restoration. Several assessment methods are available to measure the long-term performance of a groundwater recovery system. This paper presents six assessment techniques: degree of compliance with regulatory agency agreement (Consent Order of Record of Decision), hydraulic demonstration of system performance, contaminant mass recovery calculation, system design and performance comparison, statistical evaluation of groundwater quality and preferably, integration of the assessment methods. Applying specific recovery system assessment methods depends upon the type, amount, and quality of data available. Use of an integrated approach is encouraged to evaluate the success of a groundwater recovery and treatment system. The methods presented in this paper are for engineers and corporate management to use when discussing the effectiveness of groundwater remediation systems with their environmental consultant. In addition, an independent (third party) system evaluation is recommended to be sure that a recovery system operates efficiently and with minimum expense.

  8. Comparative performance testing of Harshaw 8800 and KDT-02M TLD systems.

    PubMed

    Chumak, V; Volosky, V; Chernyshov, G; Dmitrienko, A; Sukhoruchkin, A; Rozumny, V

    2002-01-01

    The Soviet-produced KDT-02M system, which is still widely used for dosimetric monitoring in countries of the former Soviet Union, was compared with the Harshaw 8800 system. The comparison consisted of two stages. In the first stage workplace radiation fields were simulated in the framework of the IAEA intercomparison. In the second stage the two systems were compared when used in parallel by the personnel of Chernobyl Object 'Shelter'. Although in the first stage the Harshaw 8800 demonstrated better performance for various irradiation conditions, an obsolete KDT-02M also proved compliance with the basic requirements to the accuracy of individual dosimetric monitoring. In the second stage, more than 1200 paired measurements were performed, revealing good (r = 0.95) correlation between readouts of both systems. Deviation of the slope of the regression line may be adjusted by proper calibration. Although the KDT-02M system demonstrated adequate results for measurement of deep dose equivalent, its inability to determine shallow dose equivalent calls for its replacement with modem thermoluminesence dosemeters possessing this feature. PMID:12382819

  9. Integrated Main Propulsion System Performance Reconstruction Process/Models

    NASA Technical Reports Server (NTRS)

    Lopez, Eduardo; Elliott, Katie; Snell, Steven; Evans, Michael

    2013-01-01

    The Integrated Main Propulsion System (MPS) Performance Reconstruction process provides the MPS post-flight data files needed for postflight reporting to the project integration management and key customers to verify flight performance. This process/model was used as the baseline for the currently ongoing Space Launch System (SLS) work. The process utilizes several methodologies, including multiple software programs, to model integrated propulsion system performance through space shuttle ascent. It is used to evaluate integrated propulsion systems, including propellant tanks, feed systems, rocket engine, and pressurization systems performance throughout ascent based on flight pressure and temperature data. The latest revision incorporates new methods based on main engine power balance model updates to model higher mixture ratio operation at lower engine power levels.

  10. A performance data network for solar process heat systems

    SciTech Connect

    Barker, G.; Hale, M.J.

    1996-03-01

    A solar process heat (SPH) data network has been developed to access remote-site performance data from operational solar heat systems. Each SPH system in the data network is outfitted with monitoring equipment and a datalogger. The datalogger is accessed via modem from the data network computer at the National Renewable Energy Laboratory (NREL). The dataloggers collect both ten-minute and hourly data and download it to the data network every 24-hours for archiving, processing, and plotting. The system data collected includes energy delivered (fluid temperatures and flow rates) and site meteorological conditions, such as solar insolation and ambient temperature. The SPH performance data network was created for collecting performance data from SPH systems that are serving in industrial applications or from systems using technologies that show promise for industrial applications. The network will be used to identify areas of SPH technology needing further development, to correlate computer models with actual performance, and to improve the credibility of SPH technology. The SPH data network also provides a centralized bank of user-friendly performance data that will give prospective SPH users an indication of how actual systems perform. There are currently three systems being monitored and archived under the SPH data network: two are parabolic trough systems and the third is a flat-plate system. The two trough systems both heat water for prisons; the hot water is used for personal hygiene, kitchen operations, and laundry. The flat plate system heats water for meat processing at a slaughter house. We plan to connect another parabolic trough system to the network during the first months of 1996. We continue to look for good examples of systems using other types of collector technologies and systems serving new applications (such as absorption chilling) to include in the SPH performance data network.

  11. Codesign Challenges for Exascale Systems: Performance, Power and Reliability

    SciTech Connect

    Kerbyson, Darren J.; Vishnu, Abhinav; Barker, Kevin J.; Hoisie, Adolfy

    2011-11-01

    The complexity of large-scale parallel systems necessitates the simultaneous optimization of multiple hardware and software components in order to achieve goals in performance, energy efficiency, and fault tolerance. Using tools such as performance modeling that enable exploration of design alternatives prior to implementation, we demonstrate the benefits of a co-design methodology for optimizing extreme-scale systems on the path to Exascale systems and workloads.

  12. Commissioning and performance of the BNL EBIS LLRF system

    SciTech Connect

    Yuan, S.; Smith, K.S.; Hayes, T.; Severino, F.; Harvey, M.; Narayan, G.; Zaltsman, A.

    2011-03-28

    The Electron Beam Ion Source (EBIS) LLRF system utilizes the RHIC LLRF upgrade platform to achieve the required functionality and flexibility. The LLRF system provides drive to the EBIS high-level RF system, employs I-Q feedback to provide required amplitude and phase stability, and implements a cavity resonance control scheme. The embedded system provides the interface to the existing Controls System, making remote system control and diagnostics possible. The flexibility of the system allows us to reuse VHDL codes, develop new functionalities, improve current designs, and implement new features with relative ease. In this paper, we will discuss the commissioning process, issues encountered, and performance of the system.

  13. Automatic image registration performance for two different CBCT systems; variation with imaging dose

    NASA Astrophysics Data System (ADS)

    Barber, J.; Sykes, J. R.; Holloway, L.; Thwaites, D. I.

    2014-03-01

    The performance of an automatic image registration algorithm was compared on image sets collected with two commercial CBCT systems, and the relationship with imaging dose was explored. CBCT images of a CIRS Virtually Human Male Pelvis phantom (VHMP) were collected on Varian TrueBeam/OBI and Elekta Synergy/XVI linear accelerators, across a range of mAs settings. Each CBCT image was registered 100 times, with random initial offsets introduced. Image registration was performed using the grey value correlation ratio algorithm in the Elekta XVI software, to a mask of the prostate volume with 5 mm expansion. Residual registration errors were calculated after correcting for the initial introduced phantom set-up error. Registration performance with the OBI images was similar to that of XVI. There was a clear dependence on imaging dose for the XVI images with residual errors increasing below 4mGy. It was not possible to acquire images with doses lower than ~5mGy with the OBI system and no evidence of reduced performance was observed at this dose. Registration failures (maximum target registration error > 3.6 mm on the surface of a 30mm sphere) occurred in 5% to 9% of registrations except for the lowest dose XVI scan (31%). The uncertainty in automatic image registration with both OBI and XVI images was found to be adequate for clinical use within a normal range of acquisition settings.

  14. NEXT Ion Propulsion System Development Status and Performance

    NASA Technical Reports Server (NTRS)

    Patterson, Michael J.; Benson, Scott W.

    2008-01-01

    NASA s Evolutionary Xenon Thruster (NEXT) project is developing next generation ion propulsion technologies to provide future NASA science missions with enhanced mission performance benefit at a low total development cost. The objective of the NEXT project is to advance next generation ion propulsion technology by producing engineering model and prototype model system components, validating these through qualification-level and integrated system testing, and ensuring preparedness for transitioning to flight system development. This paper describes the NEXT ion propulsion system development status, characteristics and performance. A review of mission analyses results conducted to date using the NEXT system is also provided.

  15. New model performance index for engineering design of control systems

    NASA Technical Reports Server (NTRS)

    1970-01-01

    Performance index includes a model representing linear control-system design specifications. Based on a geometric criterion for approximation of the model by the actual system, the index can be interpreted directly in terms of the desired system response model without actually having the model's time response.

  16. Performance of a photovoltaically powered air-conditioning system

    SciTech Connect

    Kern, Jr, E. C.; Millner, A. R.

    1980-01-01

    A vapor-compression air conditioner coupled directly to a photovoltaic array is discussed. Previous analyses of such a system are reviewed, and a development system designed to test the concept is described. Preliminary experiments indicate that the performance of this initial system falls considerably short of analytic expectations.

  17. Performance of a communication satellite system in simulated RFI

    NASA Technical Reports Server (NTRS)

    Riddle, L. P.

    1981-01-01

    Vulnerability of an advanced communication satellite system to pulsed RFI is examined. Results of an experimental simulation are compared with calculated system degradation. System performance in pulsed RFI is found to be quite good with well-designed ground receiving equipment.

  18. Incorporating Student Performance Measures into Teacher Evaluation Systems. Technical Report

    ERIC Educational Resources Information Center

    Steele, Jennifer L.; Hamilton, Laura S.; Stecher, Brian M.

    2010-01-01

    Many existing teacher evaluation and reward systems do not capture variation in teachers' ability to improve student performance on standardized tests. Improved access to longitudinal data systems that link teachers to students facilitates the development of systems that incorporate student achievement gains into teacher evaluations. However, two…

  19. Process for predicting structural performance of mechanical systems

    DOEpatents

    Gardner, David R.; Hendrickson, Bruce A.; Plimpton, Steven J.; Attaway, Stephen W.; Heinstein, Martin W.; Vaughan, Courtenay T.

    1998-01-01

    A process for predicting the structural performance of a mechanical system represents the mechanical system by a plurality of surface elements. The surface elements are grouped according to their location in the volume occupied by the mechanical system so that contacts between surface elements can be efficiently located. The process is well suited for efficient practice on multiprocessor computers.

  20. Process for predicting structural performance of mechanical systems

    DOEpatents

    Gardner, D.R.; Hendrickson, B.A.; Plimpton, S.J.; Attaway, S.W.; Heinstein, M.W.; Vaughan, C.T.

    1998-05-19

    A process for predicting the structural performance of a mechanical system represents the mechanical system by a plurality of surface elements. The surface elements are grouped according to their location in the volume occupied by the mechanical system so that contacts between surface elements can be efficiently located. The process is well suited for efficient practice on multiprocessor computers. 12 figs.

  1. Class of service in the high performance storage system

    SciTech Connect

    Louis, S.; Teaff, D.

    1995-01-10

    Quality of service capabilities are commonly deployed in archival mass storage systems as one or more client-specified parameters to influence physical location of data in multi-level device hierarchies for performance or cost reasons. The capabilities of new high-performance storage architectures and the needs of data-intensive applications require better quality of service models for modern storage systems. HPSS, a new distributed, high-performance, scalable, storage system, uses a Class of Service (COS) structure to influence system behavior. The authors summarize the design objectives and functionality of HPSS and describes how COS defines a set of performance, media, and residency attributes assigned to storage objects managed by HPSS servers. COS definitions are used to provide appropriate behavior and service levels as requested (or demanded) by storage system clients. They compare the HPSS COS approach with other quality of service concepts and discuss alignment possibilities.

  2. 5 CFR 430.204 - Agency performance appraisal system(s).

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Agency performance appraisal system(s... Other Employees § 430.204 Agency performance appraisal system(s). (a) Each agency as defined at section... employees covered by this subpart. (b) An agency appraisal system shall establish agencywide policies...

  3. Thermal system field performance predictions from laboratory and field measurements

    NASA Astrophysics Data System (ADS)

    Burks, Stephen D.; Haefner, David P.; Teaney, Brian P.; Doe, Joshua M.

    2016-05-01

    Laboratory measurements on thermal imaging systems are critical to understanding their performance in a field environment. However, it is rarely a straightforward process to directly inject thermal measurements into thermal performance modeling software to acquire meaningful results. Some of the sources of discrepancies between laboratory and field measurements are sensor gain and level, dynamic range, sensor display and display brightness, and the environment where the sensor is operating. If measurements for the aforementioned parameters could be performed, a more accurate description of sensor performance in a particular environment is possible. This research will also include the procedure for turning both laboratory and field measurements into a system model.

  4. Performance of the IBM General Parallel File System

    SciTech Connect

    Jones, T.; Koniges, A.; Yates, R.K.

    1999-09-27

    Experimental performance analysis is a necessary first step in input/output software tuning and real-time environment code performance prediction. We measure the performance and scalability of IBM's General Parallel File System (GPFS) under a variety of conditions. The measurements are based on a set of benchmark codes that allow us to vary block sizes, access patterns, etc., and to measure aggregate throughput rates. We use the data to give performance recommendations for application development and as a guide to the improvement of parallel file systems.

  5. A performability solution method for degradable nonrepairable systems

    NASA Technical Reports Server (NTRS)

    Furchtgott, D. G.; Meyer, J. F.

    1984-01-01

    The present performability model-solving algorithm identifies performance with 'reward', representing the state behavior of a system S by a finite-state stochastic process and determining reward by means of reward rates that are associated with the states of the base model. A general method is obtained for determining the probability distribution function of the performance (reward) variable, and therefore the performability, of the corresponding system. This is done for bounded utilization periods, and the result is an integral expression which is either analytically or numerically solvable.

  6. Models for evaluating the performability of degradable computing systems

    NASA Technical Reports Server (NTRS)

    Wu, L. T.

    1982-01-01

    Recent advances in multiprocessor technology established the need for unified methods to evaluate computing systems performance and reliability. In response to this modeling need, a general modeling framework that permits the modeling, analysis and evaluation of degradable computing systems is considered. Within this framework, several user oriented performance variables are identified and shown to be proper generalizations of the traditional notions of system performance and reliability. Furthermore, a time varying version of the model is developed to generalize the traditional fault tree reliability evaluation methods of phased missions.

  7. Strategic performance management: development of a performance measurement system at the Mayo Clinic.

    PubMed

    Curtright, J W; Stolp-Smith, S C; Edell, E S

    2000-01-01

    Managing and measuring performance become exceedingly complex as healthcare institutions evolve into integrated health systems comprised of hospitals, outpatient clinics and surgery centers, nursing homes, and home health services. Leaders of integrated health systems need to develop a methodology and system that align organizational strategies with performance measurement and management. To meet this end, multiple healthcare organizations embrace the performance-indicators reporting system known as a "balanced scorecard" or a "dashboard report." This discrete set of macrolevel indicators gives senior management a fast but comprehensive glimpse of the organization's performance in meeting its quality, operational, and financial goals. The leadership of outpatient operations for Mayo Clinic in Rochester, Minnesota built on this concept by creating a performance management and measurement system that monitors and reports how well the organization achieves its performance goals. Internal stakeholders identified metrics to measure performance in each key category. Through these metrics, the organization links Mayo Clinic's vision, primary value, core principles, and day-to-day operations by monitoring key performance indicators on a weekly, monthly, or quarterly basis. PMID:11066953

  8. Performance of two updated blood glucose monitoring systems: an evaluation following ISO 15197:2013.

    PubMed

    Pleus, Stefan; Baumstark, Annette; Rittmeyer, Delia; Jendrike, Nina; Haug, Cornelia; Freckmann, Guido

    2016-05-01

    Objective For patients with diabetes, regular self-monitoring of blood glucose (SMBG) is essential to ensure adequate glycemic control. Therefore, accurate and reliable blood glucose measurements with SMBG systems are necessary. The international standard ISO 15197 describes requirements for SMBG systems, such as limits within which 95% of glucose results have to fall to reach acceptable system accuracy. The 2013 version of this standard sets higher demands, especially regarding system accuracy, than the currently still valid edition. ISO 15197 can be applied by manufacturers to receive a CE mark for their system. Research design and methods This study was an accuracy evaluation following ISO 15197:2013 section 6.3 of two recently updated SMBG systems (Contour * and Contour TS; Bayer Consumer Care AG, Basel, Switzerland) with an improved algorithm to investigate whether the systems fulfill the requirements of the new standard. For this purpose, capillary blood samples of approximately 100 participants were measured with three test strip lots of both systems and deviations from glucose values obtained with a hexokinase-based comparison method (Cobas Integra † 400 plus; Roche Instrument Center, Rotkreuz, Switzerland) were determined. Percentages of values within the acceptance criteria of ISO 15197:2013 were calculated. This study was registered at clinicaltrials.gov (NCT02358408). Main outcome Both updated systems fulfilled the system accuracy requirements of ISO 15197:2013 as 98.5% to 100% of the results were within the stipulated limits. Furthermore, all results were within the clinically non-critical zones A and B of the consensus error grid for type 1 diabetes. Conclusions The technical improvement of the systems ensured compliance with ISO 15197 in the hands of healthcare professionals even in its more stringent 2013 version. Alternative presentation of system accuracy results in radar plots provides additional information with certain advantages. In addition

  9. International Space Station power module thermal control system hydraulic performance

    SciTech Connect

    Goldberg, V.

    1997-12-31

    The International Space Station (ISS) uses four photovoltaic power modules (PVMs) to provide electric power for the US On-Orbit Segment. The PVMs consist of photovoltaic arrays (PVAs), orbit replaceable units (ORUs), photovoltaic radiators (PVRs), and a thermal control system (TCS). The PVM TCS function is to maintain selected PVM components within their specified operating ranges. The TCS consists of the pump flow control subassembly (PFCS), piping system, including serpentine tubing for individual component heat exchangers, headers/manifolds, fluid disconnect couplings (FQDCs), and radiator (PVR). This paper describes the major design requirements for the TCS and the results of the system hydraulic performance predictions in regard to these requirements and system component sizing. The system performance assessments were conducted using the PVM TCS fluid network hydraulic model developed for predicting system/component pressure losses and flow distribution. Hardy-Cross method of iteration was used to model the fluid network configuration. Assessments of the system hydraulic performance were conducted based on an evaluation of uncertainties associated with the manufacturing and design tolerances. Based on results of the analysis, it was concluded that all design requirements regarding system performance could be met. The hydraulic performance range, enveloping possible system operating parameter variations was determined.

  10. Interim performance criteria for photovoltaic energy systems. [Glossary included

    SciTech Connect

    DeBlasio, R.; Forman, S.; Hogan, S.; Nuss, G.; Post, H.; Ross, R.; Schafft, H.

    1980-12-01

    This document is a response to the Photovoltaic Research, Development, and Demonstration Act of 1978 (P.L. 95-590) which required the generation of performance criteria for photovoltaic energy systems. Since the document is evolutionary and will be updated, the term interim is used. More than 50 experts in the photovoltaic field have contributed in the writing and review of the 179 performance criteria listed in this document. The performance criteria address characteristics of present-day photovoltaic systems that are of interest to manufacturers, government agencies, purchasers, and all others interested in various aspects of photovoltaic system performance and safety. The performance criteria apply to the system as a whole and to its possible subsystems: array, power conditioning, monitor and control, storage, cabling, and power distribution. They are further categorized according to the following performance attributes: electrical, thermal, mechanical/structural, safety, durability/reliability, installation/operation/maintenance, and building/site. Each criterion contains a statement of expected performance (nonprescriptive), a method of evaluation, and a commentary with further information or justification. Over 50 references for background information are also given. A glossary with definitions relevant to photovoltaic systems and a section on test methods are presented in the appendices. Twenty test methods are included to measure performance characteristics of the subsystem elements. These test methods and other parts of the document will be expanded or revised as future experience and needs dictate.

  11. Managing variability in the IO performance of petascale storage systems.

    SciTech Connect

    Wolf, Matthew; Zheng, Fang; Klasky, Scott; Schwan, Karsten; Oldfield, Ron A.; Lofstead, Gerald Fredrick, II; Liu, Qing; Kordenbrock, Todd

    2010-11-01

    Significant challenges exist for achieving peak or even consistent levels of performance when using IO systems at scale. They stem from sharing IO system resources across the processes of single large-scale applications and/or multiple simultaneous programs causing internal and external interference, which in turn, causes substantial reductions in IO performance. This paper presents interference effects measurements for two different file systems at multiple supercomputing sites. These measurements motivate developing a 'managed' IO approach using adaptive algorithms varying the IO system workload based on current levels and use areas. An implementation of these methods deployed for the shared, general scratch storage system on Oak Ridge National Laboratory machines achieves higher overall performance and less variability in both a typical usage environment and with artificially introduced levels of 'noise'. The latter serving to clearly delineate and illustrate potential problems arising from shared system usage and the advantages derived from actively managing it.

  12. Predicted performance of an integrated modular engine system

    NASA Technical Reports Server (NTRS)

    Binder, Michael; Felder, James L.

    1993-01-01

    Space vehicle propulsion systems are traditionally comprised of a cluster of discrete engines, each with its own set of turbopumps, valves, and a thrust chamber. The Integrated Modular Engine (IME) concept proposes a vehicle propulsion system comprised of multiple turbopumps, valves, and thrust chambers which are all interconnected. The IME concept has potential advantages in fault-tolerance, weight, and operational efficiency compared with the traditional clustered engine configuration. The purpose of this study is to examine the steady-state performance of an IME system with various components removed to simulate fault conditions. An IME configuration for a hydrogen/oxygen expander cycle propulsion system with four sets of turbopumps and eight thrust chambers has been modeled using the Rocket Engine Transient Simulator (ROCETS) program. The nominal steady-state performance is simulated, as well as turbopump thrust chamber and duct failures. The impact of component failures on system performance is discussed in the context of the system's fault tolerant capabilities.

  13. System Advisor Model: Flat Plate Photovoltaic Performance Modeling Validation Report

    SciTech Connect

    Freeman, J.; Whitmore, J.; Kaffine, L.; Blair, N.; Dobos, A. P.

    2013-12-01

    The System Advisor Model (SAM) is a free software tool that performs detailed analysis of both system performance and system financing for a variety of renewable energy technologies. This report provides detailed validation of the SAM flat plate photovoltaic performance model by comparing SAM-modeled PV system generation data to actual measured production data for nine PV systems ranging from 75 kW to greater than 25 MW in size. The results show strong agreement between SAM predictions and field data, with annualized prediction error below 3% for all fixed tilt cases and below 8% for all one axis tracked cases. The analysis concludes that snow cover and system outages are the primary sources of disagreement, and other deviations resulting from seasonal biases in the irradiation models and one axis tracking issues are discussed in detail.

  14. Performance criteria for dynamic window systems using nanostructured behaviors for energy harvesting and environmental comfort

    NASA Astrophysics Data System (ADS)

    Andow, Brandon C.; Krietemeyer, Bess; Stark, Peter R. H.; Dyson, Anna H.

    2013-04-01

    Contemporary commercial building types continue to incorporate predominantly glazed envelope systems, despite the associated challenges with thermal regulation, visual comfort, and increased energy consumption. The advantage of window systems that could adaptively respond to changes in the environment while meeting variable demands for building energy use and occupant comfort has led to considerable investment towards the advancement of dynamic window technologies. Although these technologies demonstrate cost warranting improvements in building energy performance, they face challenges with visible clarity, color variability and response time. Furthermore, they remain challenged with respect to their ability to adequately control important qualitative criteria for daylighting such as glare and balanced light redistribution within occupied spaces. The material dependent limitations of advanced glazing technologies have initiated a search for new thin film solutions, with new device possibilities emerging across many fields. Idealized window performance has traditionally been defined as the dynamic control of solar transmittance, glare, solar gain and daylighting at any time to manage energy, comfort and view. However, in the context of wider goals towards building energy self-sufficiency through the achievement of on-site net zero energy, emerging material systems point towards other physical phenomena for achieving transparency modulation and energy harvesting, demanding a broader range of criteria for advanced glazing controls that allow the glazed building envelope to exist as a transfer function that can address and potentially accommodate the following five principal criteria: 1. Thermal management; 2. Daylighting harvesting and modulation; 3. Maintenance of views; 4. Active power capture, transfer, storage and redistribution; 5. Information Display. Building upon the existing set of performance requirements for high-performance glazing, this paper prescribes

  15. Performance evaluation of mass storage systems for scientific databases

    SciTech Connect

    Segev, A. |; Seshadri, S.; Rotem, D.

    1994-09-01

    Mass storage systems for computers are the solution to economic storage of vast volumes of data. These systems evolved from the traditional tape libraries manned by operating personnel and the automation of the storage and retrieval function has led to significant improvement in performance. But in contrast to traditional computer systems, little work has been done to characterize performance in terms of the design parameters. The design and performance analysis of mass storage systems is complicated due to several reasons. A major reason for the complexity is the time lags that may occur in retrieving parts of the information meant for the same query. The usual queuing models used for analyzing disk performance are not directly applicable, because there is greater scope for working in parallel in mass storage systems such as robotic libraries, which help mitigate these shortcomings. In this note, robotic libraries are modeled as queueing systems and explicit results related to performance are obtained. The physical model corresponds to a mass storage system, where the information is stored in cassettes, which are retrieved by robots to be read using one or two read heads. The results pertain to the effect of file splitting on cassettes, and optimal configuration and control of robots that perform the retrieval and storage functions.

  16. Unlocking the black box: exploring the link between high-performance work systems and performance.

    PubMed

    Messersmith, Jake G; Patel, Pankaj C; Lepak, David P; Gould-Williams, Julian

    2011-11-01

    With a growing body of literature linking systems of high-performance work practices to organizational performance outcomes, recent research has pushed for examinations of the underlying mechanisms that enable this connection. In this study, based on a large sample of Welsh public-sector employees, we explored the role of several individual-level attitudinal factors--job satisfaction, organizational commitment, and psychological empowerment--as well as organizational citizenship behaviors that have the potential to provide insights into how human resource systems influence the performance of organizational units. The results support a unit-level path model, such that department-level, high-performance work system utilization is associated with enhanced levels of job satisfaction, organizational commitment, and psychological empowerment. In turn, these attitudinal variables were found to be positively linked to enhanced organizational citizenship behaviors, which are further related to a second-order construct measuring departmental performance. PMID:21787040

  17. Analysis of Photovoltaic System Energy Performance Evaluation Method

    SciTech Connect

    Kurtz, S.; Newmiller, J.; Kimber, A.; Flottemesch, R.; Riley, E.; Dierauf, T.; McKee, J.; Krishnani, P.

    2013-11-01

    Documentation of the energy yield of a large photovoltaic (PV) system over a substantial period can be useful to measure a performance guarantee, as an assessment of the health of the system, for verification of a performance model to then be applied to a new system, or for a variety of other purposes. Although the measurement of this performance metric might appear to be straight forward, there are a number of subtleties associated with variations in weather and imperfect data collection that complicate the determination and data analysis. A performance assessment is most valuable when it is completed with a very low uncertainty and when the subtleties are systematically addressed, yet currently no standard exists to guide this process. This report summarizes a draft methodology for an Energy Performance Evaluation Method, the philosophy behind the draft method, and the lessons that were learned by implementing the method.

  18. A Cost and Performance System (CAPS) in a Federal agency

    NASA Technical Reports Server (NTRS)

    Huseonia, W. F.; Penton, P. G.

    1994-01-01

    Cost and Performance System (CAPS) is an automated system used from the planning phase through implementation to analysis and documentation. Data is retrievable or available for analysis of cost versus performance anomalies. CAPS provides a uniform system across intra- and international elements. A common system is recommended throughout an entire cost or profit center. Data can be easily accumulated and aggregated into higher levels of tracking and reporting of cost and performance.The level and quality of performance or productivity is indicated in the CAPS model and its process. The CAPS model provides the necessary decision information and insight to the principal investigator/project engineer for a successful project management experience. CAPS provides all levels of management with the appropriate detailed level of data.

  19. Unlocking the Black Box: Exploring the Link between High-Performance Work Systems and Performance

    ERIC Educational Resources Information Center

    Messersmith, Jake G.; Patel, Pankaj C.; Lepak, David P.

    2011-01-01

    With a growing body of literature linking systems of high-performance work practices to organizational performance outcomes, recent research has pushed for examinations of the underlying mechanisms that enable this connection. In this study, based on a large sample of Welsh public-sector employees, we explored the role of several individual-level…

  20. Los Alamos National Laboratory's high-performance data system

    SciTech Connect

    Mercier, C.; Chorn, G.; Christman, R.; Collins, B.

    1991-01-01

    Los Alamos National Laboratory is designing a High-Performance Data System (HPDS) that will provide storage for supercomputers requiring large files and fast transfer speeds. The HPDS will meet the performance requirements by managing data transfers from high-speed storage systems connected directly to a high-speed network. File and storage management software will be distributed in workstations. Network protocols will ensure reliable, wide-area network data delivery to support long-distance distributed processing. 3 refs., 2 figs.

  1. Performance issues in management of the Space Station Information System

    NASA Technical Reports Server (NTRS)

    Johnson, Marjory J.

    1988-01-01

    The onboard segment of the Space Station Information System (SSIS), called the Data Management System (DMS), will consist of a Fiber Distributed Data Interface (FDDI) token-ring network. The performance of the DMS in scenarios involving two kinds of network management is analyzed. In the first scenario, how the transmission of routine management messages impacts performance of the DMS is examined. In the second scenario, techniques for ensuring low latency of real-time control messages in an emergency are examined.

  2. Dose Limits for Man do not Adequately Protect the Ecosystem

    SciTech Connect

    Higley, Kathryn A.; Alexakhin, Rudolf M.; McDonald, Joseph C.

    2004-08-01

    It has been known for quite some time that different organisms display differing degrees of sensitivity to the effects of ionizing radiations. Some microorganisms such as the bacterium Micrococcus radiodurans, along with many species of invertebrates, are extremely radio-resistant. Humans might be categorized as being relatively sensitive to radiation, and are a bit more resistant than some pine trees. Therefore, it could be argued that maintaining the dose limits necessary to protect humans will also result in the protection of most other species of flora and fauna. This concept is usually referred to as the anthropocentric approach. In other words, if man is protected then the environment is also adequately protected. The ecocentric approach might be stated as; the health of humans is effectively protected only when the environment is not unduly exposed to radiation. The ICRP is working on new recommendations dealing with the protection of the environment, and this debate should help to highlight a number of relevant issues concerning that topic.

  3. DARHT - an `adequate` EIS: A NEPA case study

    SciTech Connect

    Webb, M.D.

    1997-08-01

    The Dual Axis Radiographic Hydrodynamic Test (DARHT) Facility Environmental Impact Statement (EIS) provides a case study that is interesting for many reasons. The EIS was prepared quickly, in the face of a lawsuit, for a project with unforeseen environmental impacts, for a facility that was deemed urgently essential to national security. Following judicial review the EIS was deemed to be {open_quotes}adequate.{close_quotes} DARHT is a facility now being built at Los Alamos National Laboratory (LANL) as part of the Department of Energy (DOE) nuclear weapons stockpile stewardship program. DARHT will be used to evaluate the safety and reliability of nuclear weapons, evaluate conventional munitions and study high-velocity impact phenomena. DARHT will be equipped with two accelerator-driven, high-intensity X-ray machines to record images of materials driven by high explosives. DARHT will be used for a variety of hydrodynamic tests, and DOE plans to conduct some dynamic experiments using plutonium at DARHT as well.

  4. Lessons from high- and low- performing states for raising overall health system performance.

    PubMed

    Silow-Carroll, Sharon; Moody, Greg

    2011-05-01

    The authors of this brief interviewed stakeholders in states with high-ranking and low-ranking health system performance, according to The Commonwealth Fund's State Scorecard on Health System Performance. Findings suggest there are market, political, and cultural characteristics that can help or hinder health system improvement. High-performing states are more likely to have: (1) a history of continuous reform and government leadership; (2) a culture of collaboration among stakeholders; transparency of price and quality information; and (3) a congruent set of policies that focus on system improvement. Regardless of starting point, state policymakers and proponents for health system improvement can work to align incentives to change provider, health plan, purchaser, and consumer behavior; frame health in terms of economic development to gain public and political support; engage purchasers and payers to drive value and quality improvement; bring stakeholders together to develop goals and build trust; and take advantage of federal funding, incentives, and reform opportunities. PMID:21545049

  5. YUCSA: A CLIPS expert database system to monitor academic performance

    NASA Technical Reports Server (NTRS)

    Toptsis, Anestis A.; Ho, Frankie; Leindekar, Milton; Foon, Debra Low; Carbonaro, Mike

    1991-01-01

    The York University CLIPS Student Administrator (YUCSA), an expert database system implemented in C Language Integrated Processing System (CLIPS), for monitoring the academic performance of undergraduate students at York University, is discussed. The expert system component in the system has already been implemented for two major departments, and it is under testing and enhancement for more departments. Also, more elaborate user interfaces are under development. We describe the design and implementation of the system, problems encountered, and immediate future plans. The system has excellent maintainability and it is very efficient, taking less than one minute to complete an assessment of one student.

  6. Performance characteristics of solar-photovoltaic flywheel-storage systems

    NASA Astrophysics Data System (ADS)

    Jarvinen, P. O.; Brench, B. L.; Rasmussen, N. E.

    A solar photovoltaic energy flywheel storage and conversion system for residential applications was tested. Performance and efficiency measurements were conducted on the system, which utilizes low loss magnetic bearings, maximum power point tracking of the photovoltaic array, integrated permanent magnet motor generator, and output power conditioning sections of either the stand alone cycloconverter or utility interactive inverter type. The overall in/out electrical storage efficiency of the flywheel system was measured along with the power transfer efficiencies of the individual components and the system spin down tare losses. The system compares favorably with systems which use batteries and inverters.

  7. Impact of Advance Control on Microturbine Generation System Performance

    NASA Astrophysics Data System (ADS)

    Kamil Mat Hussin, Ahmad; Zamri Che Wanik, Mohd

    2013-06-01

    Advance control employed in microturbine generation system (MTGS) is expected to improve its performance in responding to grid faults. This paper compares the effect of advance control of MTGS power conversion topology on the performance in riding through the grid faults. The analysis and investigation study through simulation shows there is no significant different on MTGS output performance even advance control is employed for its rectifier.

  8. Viking 75 project: Viking lander system primary mission performance report

    NASA Technical Reports Server (NTRS)

    Cooley, C. G.

    1977-01-01

    Viking Lander hardware performance during launch, interplanetary cruise, Mars orbit insertion, preseparation, separation through landing, and the primary landed mission, with primary emphasis on Lander engineering and science hardware operations, the as-flown mission are described with respect to Lander system performance and anomalies during the various mission phases. The extended mission and predicted Lander performance is discussed along with a summary of Viking goals, mission plans, and description of the Lander, and its subsystem definitions.

  9. A Systemic Cause Analysis Model for Human Performance Technicians

    ERIC Educational Resources Information Center

    Sostrin, Jesse

    2011-01-01

    This article presents a systemic, research-based cause analysis model for use in the field of human performance technology (HPT). The model organizes the most prominent barriers to workplace learning and performance into a conceptual framework that explains and illuminates the architecture of these barriers that exist within the fabric of everyday…

  10. Tracking the Performance Evolution of Blue Gene Systems

    SciTech Connect

    Kerbyson, Darren J.; Barker, Kevin J.; Gallo, Diego S.; Chen, Dong; Brunheroto, Jose R.; Ryu, Kyung D.; Chiu, George L.; Hoisie, Adolfy

    2013-06-17

    — IBM’s Blue Gene supercomputer has evolved through three generations from the original Blue Gene/L to P to Q. A higher level of integration has enabled greater single-core performance, and a larger concurrency per compute node. Although these changes have brought with them a higher overall system peak-performance, no study has examined in detail the evolution of perfor-mance across system generations. In this work we make two significant contri-butions – that of providing a comparative performance analysis across Blue Gene generations using a consistent set of tests, and also in providing a validat-ed performance model of the NEK-Bone proxy application. The combination of empirical analysis and the predictive performance model enable us to not only directly compare measured performance but also allow for a comparison of sys-tem configurations that cannot currently be measured. We provide insights into how the changing characteristics of Blue Gene have impacted on the application performance, as well as what future systems may be able to achieve.

  11. Group Performance in Information Systems Project Groups: An Empirical Study

    ERIC Educational Resources Information Center

    Bahli, Bouchaib; Buyukkurt, Meral Demirbag

    2005-01-01

    The importance of teamwork in Information Systems Development (ISD) practice and education has been acknowledged but not studied extensively to date. This paper tests a model of how groups participating in ISD projects perform and examines the relationships between some antecedents of this performance based on group research theory well…

  12. Incentives and Their Dynamics in Public Sector Performance Management Systems

    ERIC Educational Resources Information Center

    Heinrich, Carolyn J.; Marschke, Gerald

    2010-01-01

    We use the principal-agent model as a focal theoretical frame for synthesizing what we know, both theoretically and empirically, about the design and dynamics of the implementation of performance management systems in the public sector. In this context, we review the growing body of evidence about how performance measurement and incentive systems…

  13. Designing Electronic Performance Support Systems: Models and Instructional Strategies Employed

    ERIC Educational Resources Information Center

    Nekvinda, Christopher D.

    2011-01-01

    The purpose of this qualitative study was to determine whether instructional designers and performance technologists utilize instructional design models when designing and developing electronic performance support systems (EPSS). The study also explored if these same designers were utilizing instructional strategies within their EPSS to support…

  14. Illinois Community College System. Performance Report For Fiscal Year 2004

    ERIC Educational Resources Information Center

    Illinois Community College Board, 2004

    2004-01-01

    The Illinois Community College System Performance Report replaces the Results Report and reflects an initial effort to increasingly streamline and integrate state outcomes and progress reporting in Illinois. The fresh approach taken this year further combines qualitative information and quantitative data reporting. The Performance Report is…

  15. Thermal control surfaces experiment (SOO69) flight systems performance

    NASA Technical Reports Server (NTRS)

    Wilkes, Donald R.; Hummer, Leigh L.

    1991-01-01

    The thermal control surfaces experiment (TCSE) was the most complex hardware system aboard the Long Duration Exposure Facility (LDEF). The TCSE system consists of a scanning spectroreflectometer that measured test samples mounted on a rotatable carousel assembly. A microprocessor based data system controlled all aspects of TCSE system operation. Power was provided by four primary batteries. Flight measurement and housekeeping data were stored on a tape recorder for postflight analysis. The TCSE is a microcosm of complex electro-optical payloads being developed by NASA, DoD, and the aerospace community. The TCSE provides valuable data on the performance of these systems in space. The TCSE flight system and its excellent performance on the LDEF mission are described. A few operational anomalies were encountered and are discussed. Initial post-flight tests show that the TCSE system remains functional although some degradation in the optical measurements were observed. The results of these tests are also presented.

  16. Middleware in Modern High Performance Computing System Architectures

    SciTech Connect

    Engelmann, Christian; Ong, Hong Hoe; Scott, Stephen L

    2007-01-01

    A recent trend in modern high performance computing (HPC) system architectures employs ''lean'' compute nodes running a lightweight operating system (OS). Certain parts of the OS as well as other system software services are moved to service nodes in order to increase performance and scalability. This paper examines the impact of this HPC system architecture trend on HPC ''middleware'' software solutions, which traditionally equip HPC systems with advanced features, such as parallel and distributed programming models, appropriate system resource management mechanisms, remote application steering and user interaction techniques. Since the approach of keeping the compute node software stack small and simple is orthogonal to the middleware concept of adding missing OS features between OS and application, the role and architecture of middleware in modern HPC systems needs to be revisited. The result is a paradigm shift in HPC middleware design, where single middleware services are moved to service nodes, while runtime environments (RTEs) continue to reside on compute nodes.

  17. Integrated performance and reliability specification for digital avionics systems

    NASA Technical Reports Server (NTRS)

    Brehm, Eric W.; Goettge, Robert T.

    1995-01-01

    This paper describes an automated tool for performance and reliability assessment of digital avionics systems, called the Automated Design Tool Set (ADTS). ADTS is based on an integrated approach to design assessment that unifies traditional performance and reliability views of system designs, and that addresses interdependencies between performance and reliability behavior via exchange of parameters and result between mathematical models of each type. A multi-layer tool set architecture has been developed for ADTS that separates the concerns of system specification, model generation, and model solution. Performance and reliability models are generated automatically as a function of candidate system designs, and model results are expressed within the system specification. The layered approach helps deal with the inherent complexity of the design assessment process, and preserves long-term flexibility to accommodate a wide range of models and solution techniques within the tool set structure. ADTS research and development to date has focused on development of a language for specification of system designs as a basis for performance and reliability evaluation. A model generation and solution framework has also been developed for ADTS, that will ultimately encompass an integrated set of analytic and simulated based techniques for performance, reliability, and combined design assessment.

  18. Initial performance of the advanced inventory verification sample system (AVIS)

    SciTech Connect

    Marlow, Johnna B; Swinhoe, Martyn T; Menlove, Howard O; Rael, Carlos D

    2009-01-01

    This paper describes the requirements, design and initial performance of the Advanced Inventory Verification Sample System (AVIS) a non-destructive assay (NDA) system to measure small samples of bulk mixed uranium-plutonium oxide (MOX) materials (powders and pellets). The AVIS design has evolved from previously developed conceptual physics and engineering designs for the Inventory Sample Verification System (INVS), a safeguards system for nondestructive assay of small samples. The AVIS is an integrated gamma-neutron system. Jointly designed by the Nuclear Material Control Center (NMCC) and the Los Alamos National Laboratory (LANL), AVIS is intended to meet a performance specification of a total measurement uncertainty of less than 0.5% in the neutron ({sup 240}Pu{sub effective}) measurement. This will allow the AVIS to replace destructive chemical analysis for many samples, with concomitant cost, exposure and waste generation savings for the facility. Data taken to date confirming the performance of the AVIS is presented.

  19. Total-System Performance Assessment for the Yucca Mountain Site

    SciTech Connect

    M.L. Wilson

    2001-12-13

    Yucca Mountain, Nevada, is under consideration as a potential site for a repository for high-level radioactive waste. Total-system performance-assessment simulations are performed to evaluate the safety of the site. Features, events, and processes have been systematically evaluated to determine which ones are significant to the safety assessment. Computer models of the disposal system have been developed within a probabilistic framework, including both engineered and natural components. Selected results are presented for three different total-system simulations, and the behavior of the disposal system is discussed. The results show that risk is dominated by igneous activity at early times, because the robust waste-package design prevents significant nominal (non-disruptive) releases for tens of thousands of years or longer. The uncertainty in the nominal performance is dominated by uncertainties related to waste-package corrosion at early times and by uncertainties in the natural system, most significantly infiltration, at late times.

  20. High-performance multimedia encryption system based on chaos.

    PubMed

    Hasimoto-Beltrán, Rogelio

    2008-06-01

    Current chaotic encryption systems in the literature do not fulfill security and performance demands for real-time multimedia communications. To satisfy these demands, we propose a generalized symmetric cryptosystem based on N independently iterated chaotic maps (N-map array) periodically perturbed with a three-level perturbation scheme and a double feedback (global and local) to increase the system's robustness to attacks. The first- and second-level perturbations make cryptosystem extremely sensitive to changes in the plaintext data since the system's output itself (ciphertext global feedback) is used in the perturbation process. Third-level perturbation is a system reset, in which the system-key and chaotic maps are replaced for totally new values. An analysis of the proposed scheme regarding its vulnerability to attacks, statistical properties, and implementation performance is presented. To the best of our knowledge we provide a secure cryptosystem with one of the highest levels of performance for real-time multimedia communications. PMID:18601477

  1. Mode S beacon system terminal configuration performance test report

    NASA Astrophysics Data System (ADS)

    Alimenti, Raymond J.

    1995-05-01

    This document reports the findings of the performance tests conducted on the terminal configuration of the Mode S Beacon System. The tests were conducted at the FAA Technical Center using the first article system from the Mode S production contract. The Mode S system under test was a fully configured dual channel system having all required external interfaces connected to actual NAS equipment. A combination of live aircraft and simulated targets were used in the test conduct and data collection. The tests were conducted in accordance with the Mode S Master Test Plan (DOTIFAA/CT-88128) and the Node S Performance Test Plan (DOTIFAA/CT-Th 90124). The test goals are to characterize the performance of the Mode S system in key areas and to establish a baseline from which to evaluate future changes.

  2. Detection performance of laser range-gated imaging system

    NASA Astrophysics Data System (ADS)

    Xu, Jun; Li, Xiaofeng; Luo, Jijun; Zhang, Shengxiu; Xu, Yibin

    2010-10-01

    Laser radar is rapidly developing towards very capable sensors for number of applications such as military sensing and guidance, auto collision avoidance, robotic vision and atmospheric sensing. In this paper, the detection performance of non-scanned Laser Rang-gated (LRG) imaging system is studied. In order to compute the detection range of laser active imaging system, the range equation is derived by using laser illuminating model and considering factors which affect system imaging quality. According to the principle of laser radar and the characters of objects and the detectors in special applied setting, it mainly deduced the non-scanned laser radar range equation of the range-gated system, meanwhile, the SNR model of non-scanned LRG imaging system is set up. Then, relationship of the detection probability, the false alarm probability and the signal-to-noise ratio in the non-scanned LRG imaging system are analyzed, the influence factors of system's performance are pointed out, and the solution is proposed. The detection performance simulation software of non-scanned LRG imaging system is designed with MATLAB and the performance of the imaging system is simulated.

  3. Proceedings of the 2009 Performance Metrics for Intelligent Systems Workshop

    SciTech Connect

    Madhavan, Raj; Messina, Elena

    2009-09-01

    The Performance Metrics for Intelligent Systems (PerMIS) workshop is dedicated to defining measures and methodologies of evaluating performance of intelligent systems. As the only workshop of its kind, PerMIS has proved to be an excellent forum for sharing lessons learned and discussions as well as fostering collaborations between researchers and practitioners from industry, academia and government agencies. The main theme of the ninth iteration of the workshop, PerMIS'09, seeks to address the question: 'Does performance measurement accelerate the pace of advancement for intelligent systems?' In addition to the main theme, as in previous years, the workshop will focus on applications of performance measures to practical problems in commercial, industrial, homeland security, and military applications. The PerMIS'09 program consists of six plenary addresses and six general and special sessions. The topics that are to be discussed by the speakers cover a wide array of themes centered on many intricate facets of intelligent system research. The presentations will emphasize and showcase the interdisciplinary nature of intelligent systems research and why it is not straightforward to evaluate such interconnected system of systems. The three days of twelve sessions will span themes from manufacturing, mobile robotics, human-system interaction, theory of mind, testing and evaluation of unmanned systems, to name a few.

  4. Enhancing Complex System Performance Using Discrete-Event Simulation

    SciTech Connect

    Allgood, Glenn O; Olama, Mohammed M; Lake, Joe E

    2010-01-01

    In this paper, we utilize discrete-event simulation (DES) merged with human factors analysis to provide the venue within which the separation and deconfliction of the system/human operating principles can occur. A concrete example is presented to illustrate the performance enhancement gains for an aviation cargo flow and security inspection system achieved through the development and use of a process DES. The overall performance of the system is computed, analyzed, and optimized for the different system dynamics. Various performance measures are considered such as system capacity, residual capacity, and total number of pallets waiting for inspection in the queue. These metrics are performance indicators of the system's ability to service current needs and respond to additional requests. We studied and analyzed different scenarios by changing various model parameters such as the number of pieces per pallet ratio, number of inspectors and cargo handling personnel, number of forklifts, number and types of detection systems, inspection modality distribution, alarm rate, and cargo closeout time. The increased physical understanding resulting from execution of the queuing model utilizing these vetted performance measures identified effective ways to meet inspection requirements while maintaining or reducing overall operational cost and eliminating any shipping delays associated with any proposed changes in inspection requirements. With this understanding effective operational strategies can be developed to optimally use personnel while still maintaining plant efficiency, reducing process interruptions, and holding or reducing costs.

  5. Performance analysis and visualization of electric power systems

    NASA Astrophysics Data System (ADS)

    Dong, Xuejiang; Shinozuka, Masanobu

    2003-08-01

    This paper describes a method of system performance evaluation for electric power network. The basic element that plays a crucial role here is the fragility information for transmission system equipment. The method utilizes the fragility information for evaluation of system performance degradation of LADWP's (Los Angeles Department of Water and Power's) power network damaged by a severe earthquake by comparing its performance before and after the earthquake event. One of the highlights of this paper is the use of computer code "PowerWorld" to visualize the state of power flow of the network, segment by segment. Similarly, the method can evaluate quantitatively the effect of various measures of rehabilitation or retrofit performed on equipment and/or facilities of the network. This is done by comparing the system performance with or without the rehabilitation. In this context, the results of experimental and analytical studies carried out by other researchers are used to determine the possible range of fragility enhancement associated with the rehabilitation of transformers in terms of base-isolation systems. In this analysis, 47 scenario earthquakes are used to develop the risk curves for the LADWP"s power transmission system. The risk curve can then be correlated to economic impact of the reduction in power supply due to earthquake. Recovery aspects of the damaged power system will be studied from this point of view in future.

  6. Continuous performance measurement in flight systems. [sequential control model

    NASA Technical Reports Server (NTRS)

    Connelly, E. M.; Sloan, N. A.; Zeskind, R. M.

    1975-01-01

    The desired response of many man machine control systems can be formulated as a solution to an optimal control synthesis problem where the cost index is given and the resulting optimal trajectories correspond to the desired trajectories of the man machine system. Optimal control synthesis provides the reference criteria and the significance of error information required for performance measurement. The synthesis procedure described provides a continuous performance measure (CPM) which is independent of the mechanism generating the control action. Therefore, the technique provides a meaningful method for online evaluation of man's control capability in terms of total man machine performance.

  7. 5 CFR 9701.405 - Performance management system requirements.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... requirements. 9701.405 Section 9701.405 Administrative Personnel DEPARTMENT OF HOMELAND SECURITY HUMAN RESOURCES MANAGEMENT SYSTEM (DEPARTMENT OF HOMELAND SECURITY-OFFICE OF PERSONNEL MANAGEMENT) DEPARTMENT OF HOMELAND SECURITY HUMAN RESOURCES MANAGEMENT SYSTEM Performance Management § 9701.405...

  8. 5 CFR 9701.405 - Performance management system requirements.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... requirements. 9701.405 Section 9701.405 Administrative Personnel DEPARTMENT OF HOMELAND SECURITY HUMAN RESOURCES MANAGEMENT SYSTEM (DEPARTMENT OF HOMELAND SECURITY-OFFICE OF PERSONNEL MANAGEMENT) DEPARTMENT OF HOMELAND SECURITY HUMAN RESOURCES MANAGEMENT SYSTEM Performance Management § 9701.405...

  9. 5 CFR 9701.405 - Performance management system requirements.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... requirements. 9701.405 Section 9701.405 Administrative Personnel DEPARTMENT OF HOMELAND SECURITY HUMAN RESOURCES MANAGEMENT SYSTEM (DEPARTMENT OF HOMELAND SECURITY-OFFICE OF PERSONNEL MANAGEMENT) DEPARTMENT OF HOMELAND SECURITY HUMAN RESOURCES MANAGEMENT SYSTEM Performance Management § 9701.405...

  10. Frontiers of Performance Analysis on Leadership-Class Systems

    SciTech Connect

    Fowler, R J; Adhianto, L; de Supinski, B R; Fagan, M; Gamblin, T; Krentel, M; Mellor-Crummey, J; Schulz, M; Tallent, N

    2009-06-15

    The number of cores in high-end systems for scientific computing are employing is increasing rapidly. As a result, there is an pressing need for tools that can measure, model, and diagnose performance problems in highly-parallel runs. We describe two tools that employ complementary approaches for analysis at scale and we illustrate their use on DOE leadership-class systems.

  11. Image processing system performance prediction and product quality evaluation

    NASA Technical Reports Server (NTRS)

    Stein, E. K.; Hammill, H. B. (Principal Investigator)

    1976-01-01

    The author has identified the following significant results. A new technique for image processing system performance prediction and product quality evaluation was developed. It was entirely objective, quantitative, and general, and should prove useful in system design and quality control. The technique and its application to determination of quality control procedures for the Earth Resources Technology Satellite NASA Data Processing Facility are described.

  12. Measuring Performance of Virtual Learning Environment System in Higher Education

    ERIC Educational Resources Information Center

    Ho, William; Higson, Helen E.; Dey, Prasanta K.; Xu, Xiaowei; Bahsoon, Rami

    2009-01-01

    Purpose: The purpose of this paper is to measure the performance of commercial virtual learning environment (VLE) systems, which helps the decision makers to select the appropriate system for their institutions. Design/methodology/approach: This paper develops an integrated multiple criteria decision making approach, which combines the analytic…

  13. 5 CFR 9701.405 - Performance management system requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... requirements. 9701.405 Section 9701.405 Administrative Personnel DEPARTMENT OF HOMELAND SECURITY HUMAN RESOURCES MANAGEMENT SYSTEM (DEPARTMENT OF HOMELAND SECURITY-OFFICE OF PERSONNEL MANAGEMENT) DEPARTMENT OF HOMELAND SECURITY HUMAN RESOURCES MANAGEMENT SYSTEM Performance Management § 9701.405...

  14. Performance Analysis of Optical Code Division Multiplex System

    NASA Astrophysics Data System (ADS)

    Kaur, Sandeep; Bhatia, Kamaljit Singh

    2013-12-01

    This paper presents the Pseudo-Orthogonal Code generator for Optical Code Division Multiple Access (OCDMA) system which helps to reduce the need of bandwidth expansion and improve spectral efficiency. In this paper we investigate the performance of multi-user OCDMA system to achieve data rate more than 1 Tbit/s.

  15. Human transfer functions used to predict system performance parameters

    NASA Technical Reports Server (NTRS)

    1966-01-01

    Automatic, parameter-tracking, model-matching technique compares the responses of a human operator with those of an analog computer model of a human operator to predict and analyze the performance of mechanical or electromechanical systems prior to construction. Transfer functions represent the input-output relation of an operator controlling a closed-loop system.

  16. Impact of ambient pressure on performance of desiccant cooling systems

    NASA Astrophysics Data System (ADS)

    Pesaran, A. A.

    1991-12-01

    The impact of ambient pressure on the performance of the ventilation cycle desiccant cooling system and its components was studied using computer simulations. The impact of ambient pressure depended on whether the system was designed for fixed-mass flow rate or fixed-volume flow rate operation. As ambient pressure decreased from 1.0 to 0.8 atm, the system thermal coefficient of performance increased by 8 pct. for both fixed-mass and fixed-volume flow rate, the cooling capacity of the system (in kW) was decreased by 14 pct. for the fixed-volume flow rate system and increased by 7 pct. for the fixed-mass flow rate system, the electric power requirements for the system with fixed-volume flow rate did not change, and the electric power requirement for the fixed-mass flow rate system increased by 44 pct. The overall coefficient of performance increased up to 5 pct. for the fixed-volume flow rate systems, and decreased up to 4 pct. for the fixed-mass flow rate system.

  17. On Adequate Comparisons of Antenna Phase Center Variations

    NASA Astrophysics Data System (ADS)

    Schoen, S.; Kersten, T.

    2013-12-01

    One important part for ensuring the high quality of the International GNSS Service's (IGS) products is the collection and publication of receiver - and satellite antenna phase center variations (PCV). The PCV are crucial for global and regional networks, since they introduce a global scale factor of up to 16ppb or changes in the height component with an amount of up to 10cm, respectively. Furthermore, antenna phase center variations are also important for precise orbit determination, navigation and positioning of mobile platforms, like e.g. the GOCE and GRACE gravity missions, or for the accurate Precise Point Positioning (PPP) processing. Using the EUREF Permanent Network (EPN), Baire et al. (2012) showed that individual PCV values have a significant impact on the geodetic positioning. The statements are further supported by studies of Steigenberger et al. (2013) where the impact of PCV for local-ties are analysed. Currently, there are five calibration institutions including the Institut für Erdmessung (IfE) contributing to the IGS PCV file. Different approaches like field calibrations and anechoic chamber measurements are in use. Additionally, the computation and parameterization of the PCV are completely different within the methods. Therefore, every new approach has to pass a benchmark test in order to ensure that variations of PCV values of an identical antenna obtained from different methods are as consistent as possible. Since the number of approaches to obtain these PCV values rises with the number of calibration institutions, there is the necessity for an adequate comparison concept, taking into account not only the numerical values but also stochastic information and computational issues of the determined PCVs. This is of special importance, since the majority of calibrated receiver antennas published by the IGS origin from absolute field calibrations based on the Hannover Concept, Wübbena et al. (2000). In this contribution, a concept for the adequate

  18. Improving access to adequate pain management in Taiwan.

    PubMed

    Scholten, Willem

    2015-06-01

    There is a global crisis in access to pain management in the world. WHO estimates that 4.65 billion people live in countries where medical opioid consumption is near to zero. For 2010, WHO considered a per capita consumption of 216.7 mg morphine equivalents adequate, while Taiwan had a per capita consumption of 0.05 mg morphine equivalents in 2007. In Asia, the use of opioids is sensitive because of the Opium Wars in the 19th century and for this reason, the focus of controlled substances policies has been on the prevention of diversion and dependence. However, an optimal public health outcome requires that also the beneficial aspects of these substances are acknowledged. Therefore, WHO recommends a policy based on the Principle of Balance: ensuring access for medical and scientific purposes while preventing diversion, harmful use and dependence. Furthermore, international law requires that countries ensure access to opioid analgesics for medical and scientific purposes. There is evidence that opioid analgesics for chronic pain are not associated with a major risk for developing dependence. Barriers for access can be classified in the categories of overly restrictive laws and regulations; insufficient medical training on pain management and problems related to assessment of medical needs; attitudes like an excessive fear for dependence or diversion; and economic and logistical problems. The GOPI project found many examples of such barriers in Asia. Access to opioid medicines in Taiwan can be improved by analysing the national situation and drafting a plan. The WHO policy guidelines Ensuring Balance in National Policies on Controlled Substances can be helpful for achieving this purpose, as well as international guidelines for pain treatment. PMID:26068436

  19. Power plant performance monitoring and improvement. Volume 3. Power plant performance instrumentation systems

    SciTech Connect

    Crim, H.G.; Westcott, J.C.; de Mello, R.W.; Brandon, R.E.; Parkinson, D.W.; Czuba, J.S.

    1986-02-01

    PEPCO's Morgantown Unit 2 and the PJM system control center are serving as the test facilities for this project. This first phase of the project utilizes currently (or soon to be) available instrumentation for monitoring and analyzing plant and system performance on a continuous basis. The overall approach is to demonstrate in one facility all sensors, monitoring devices, and necessary computer hardware and software for on-line performance monitoring and dispatch purposes. Significant developments include turbine packing leakage measurement, condenser back-pressure measurement, power cycle testing, and studies of the application of advanced instrumentation to system dispatch.

  20. Performance of Desiccant Particle Dispersion Type Air Conditioning System

    NASA Astrophysics Data System (ADS)

    Hatano, Hiroyuki; Suzuki, Koichi; Kojima, Hiromitsu

    An investigation of desiccant air conditioning system is performed to demonstrate its performance in a dispersed desiccant particle systems, based on its higher gas solid contacting efficiency and isothermal dehumidification. Particle dispersion is achieved using the risers of a circulating fluidized bed, CFB, or of a pneumatic conveyer. The risers used for dehumidification are 1390 mm in height and 22 mm in diameter. The former is used to evaluate the overall dehumidification performance and the latter is used to measure the axial humidity distribution under 0.88 m/s of a superficial air velocity. Based on the results of the overall performance by changing solid loading rates, Gs, from 0.4 kg/m2s up to 6 kg/m2s, desiccant particle dispersion shows higher performance in dehumidification, while axial humidity distribution shows very rapid adsorption rate in the entrance zone of the riser. Removal of adsorption heat accelerates dehumidification rate compared to the adiabatic process.

  1. Performance analysis of static locking in distributed database systems

    SciTech Connect

    Shyu, S.C. ); Li, V.O.K. . Dept. of Electrical Engineering)

    1990-06-01

    Numerous performance models have been proposed for locking algorithms in centralized database systems, but few have been developed for distributed ones. Existing results on distributed locking usually ignore the deadlock problem so as to simplify the analysis. In this paper, a new performance model for static locking in distributed database systems is developed.A queuing model is used to approximate static locking in distributed database systems without deadlocks. Then a random graph model is proposed to find the deadlock probability of each transaction. The above two models are integrated, so that given the transaction arrival rate, the response time and the effective throughput can be calculated.

  2. Performance of the Large Binocular Telescope's hydrostatic bearing system

    NASA Astrophysics Data System (ADS)

    Howard, James; Ashby, David; Kern, Jonathan

    2010-07-01

    The Large Binocular Telescope's hydrostatic bearing system is operational, and tuning for optimal performance is currently underway. This low friction system allows for the precise control of the 700 ton telescope at temperatures ranging from -20°C to +25°C. It was a challenge to meet the performance requirements on such a massive telescope with a wide range of operating temperatures. This required changes to the original design, including significantly improving oil temperature control, and adding variable capillary resistors to allow for precise flow control to each pocket on each bearing. We will present a system description and report on lessons learned.

  3. Building and managing high performance, scalable, commodity mass storage systems

    NASA Technical Reports Server (NTRS)

    Lekashman, John

    1998-01-01

    The NAS Systems Division has recently embarked on a significant new way of handling the mass storage problem. One of the basic goals of this new development are to build systems at very large capacity and high performance, yet have the advantages of commodity products. The central design philosophy is to build storage systems the way the Internet was built. Competitive, survivable, expandable, and wide open. The thrust of this paper is to describe the motivation for this effort, what we mean by commodity mass storage, what the implications are for a facility that performs such an action, and where we think it will lead.

  4. Performance of PLL synchronized optical PPM communication systems

    NASA Technical Reports Server (NTRS)

    Chen, C.-C.; Gardner, C. S.

    1986-01-01

    Receiver timing synchronization of an optical PPM communication system can be achieved using a phase-locked loop (PLL) if the photodetector output is properly processed. The synchronization performance is shown to improve with increasing signal power and decreasing loop bandwidth. The bit error rate performance of the PLL synchronized PPM system is analyzed and compared to that of the perfectly synchronized system. It is shown that the increase in signal power needed to compensate for the imperfect sychronization is small (less than 0.1 dB) for loop bandwidths less than 0.1 percent of the slot frequency.

  5. All-ceramic systems: laboratory and clinical performance.

    PubMed

    Guess, Petra C; Schultheis, Stefan; Bonfante, Estevam A; Coelho, Paulo G; Ferencz, Jonathan L; Silva, Nelson R F A

    2011-04-01

    Several all-ceramic systems have been developed in dentistry to meet the increased expectations of patients and dentists for highly aesthetic, biocompatible, and long-lasting restorations. However, early bulk fractures or chippings have led the research community to investigate the mechanical performance of the all-ceramic systems. This overview explores the current knowledge of monolithic and bilayer dental all-ceramic systems, addressing composition and processing mechanisms, laboratory and clinical performance, and possible future trends for all-ceramic materials. PMID:21473997

  6. Performance analysis of Ethernet PON system accommodating 64 ONUs

    NASA Astrophysics Data System (ADS)

    Tanaka, Keiji; Ohara, Kazuho; Miyazaki, Noriyuki; Edagawa, Noboru

    2007-05-01

    We report the performance of an IEEE 802.3 standard compliant Ethernet passive optical network (EPON) system accommodating 64 optical network units (ONUs). After investigating the optical transmission performance, we successfully demonstrate that a high throughput of more than 900Mbits/s can be achieved in a 64-ONU EPON system using multiple logical link identifiers per ONU within a range of 10km. In addition, we confirm the feasibility of IP-based high-quality triple play services in the EPON system.

  7. Performance predictions for the Keck telescope adaptive optics system

    SciTech Connect

    Gavel, D.T.; Olivier, S.S.

    1995-08-07

    The second Keck ten meter telescope (Keck-11) is slated to have an infrared-optimized adaptive optics system in the 1997--1998 time frame. This system will provide diffraction-limited images in the 1--3 micron region and the ability to use a diffraction-limited spectroscopy slit. The AO system is currently in the preliminary design phase and considerable analysis has been performed in order to predict its performance under various seeing conditions. In particular we have investigated the point-spread function, energy through a spectroscopy slit, crowded field contrast, object limiting magnitude, field of view, and sky coverage with natural and laser guide stars.

  8. Space instrument performance traceability for high resolution satellite systems

    NASA Astrophysics Data System (ADS)

    Eckardt, A.; Börner, A.; Jahn, H.; Reulke, R.

    2008-08-01

    Technology changes in detector development and the significant improvement of manufacturing accuracy in combination with the permanent engineering research influences the spaceborne sensor systems, which are focused on Earth observation and remote sensing. Developments in focal plane technology, e.g. the combination of large TDI lines, intelligent synchronisation control, fast readable sensors and new focal plane and telescope concepts are the key developments for new remote sensing instruments. This class of instruments disposes of high spatial and radiometric resolution for the generation of data products for mapping and 3D GIS VR applications. Systemic approaches are essential for the design of complex sensor systems based on dedicated tasks. The system-theoretical description of the instrument inside and a simulated environment is the basic approach for the optimisation process of the optical, mechanical and electrical designs and assembly. Single modules and the entire system have to be calibrated and verified. The traceability of the performance-related parameters from the single sensor up to the flight readiness of the instrument forms the main focus inside such complex systems. In the future it will also be possible to prove the sensor performance on wafer level before assembly. This paper gives an overview about current technologies for performance measurements on sensor, focal plane assembly (FPA) and instrument level without the optical performance of the telescope. The paper proposes also a technology, which can be used for sensor performance measurements on wafer level.

  9. Performance evaluation of infrared imaging system in field test

    NASA Astrophysics Data System (ADS)

    Wang, Chensheng; Guo, Xiaodong; Ren, Tingting; Zhang, Zhi-jie

    2014-11-01

    Infrared imaging system has been applied widely in both military and civilian fields. Since the infrared imager has various types and different parameters, for system manufacturers and customers, there is great demand for evaluating the performance of IR imaging systems with a standard tool or platform. Since the first generation IR imager was developed, the standard method to assess the performance has been the MRTD or related improved methods which are not perfect adaptable for current linear scanning imager or 2D staring imager based on FPA detector. For this problem, this paper describes an evaluation method based on the triangular orientation discrimination metric which is considered as the effective and emerging method to evaluate the synthesis performance of EO system. To realize the evaluation in field test, an experiment instrument is developed. And considering the importance of operational environment, the field test is carried in practical atmospheric environment. The test imagers include panoramic imaging system and staring imaging systems with different optics and detectors parameters (both cooled and uncooled). After showing the instrument and experiment setup, the experiment results are shown. The target range performance is analyzed and discussed. In data analysis part, the article gives the range prediction values obtained from TOD method, MRTD method and practical experiment, and shows the analysis and results discussion. The experimental results prove the effectiveness of this evaluation tool, and it can be taken as a platform to give the uniform performance prediction reference.

  10. State of the art in video system performance

    NASA Technical Reports Server (NTRS)

    Lewis, Michael J.

    1990-01-01

    The closed circuit television (CCTV) system that is onboard the Space Shuttle has the following capabilities: camera, video signal switching and routing unit (VSU); and Space Shuttle video tape recorder. However, this system is inadequate for use with many experiments that require video imaging. In order to assess the state-of-the-art in video technology and data storage systems, a survey was conducted of the High Resolution, High Frame Rate Video Technology (HHVT) products. The performance of the state-of-the-art solid state cameras and image sensors, video recording systems, data transmission devices, and data storage systems versus users' requirements are shown graphically.

  11. Optical communication system performance with tracking error induced signal fading.

    NASA Technical Reports Server (NTRS)

    Tycz, M.; Fitzmaurice, M. W.; Premo, D. A.

    1973-01-01

    System performance is determined for an optical communication system using noncoherent detection in the presence of tracking error induced signal fading assuming (1) binary on-off modulation (OOK) with both fixed and adaptive threshold receivers, and (2) binary polarization modulation (BPM). BPM is shown to maintain its inherent 2- to 3-dB advantage over OOK when adaptive thresholding is used, and to have a substantially greater advantage when the OOK system is restricted to a fixed decision threshold.

  12. Active imaging system performance model for target acquisition

    NASA Astrophysics Data System (ADS)

    Espinola, Richard L.; Teaney, Brian; Nguyen, Quang; Jacobs, Eddie L.; Halford, Carl E.; Tofsted, David H.

    2007-04-01

    The U.S. Army RDECOM CERDEC Night Vision & Electronic Sensors Directorate has developed a laser-range-gated imaging system performance model for the detection, recognition, and identification of vehicle targets. The model is based on the established US Army RDECOM CERDEC NVESD sensor performance models of the human system response through an imaging system. The Java-based model, called NVLRG, accounts for the effect of active illumination, atmospheric attenuation, and turbulence effects relevant to LRG imagers, such as speckle and scintillation, and for the critical sensor and display components. This model can be used to assess the performance of recently proposed active SWIR systems through various trade studies. This paper will describe the NVLRG model in detail, discuss the validation of recent model components, present initial trade study results, and outline plans to validate and calibrate the end-to-end model with field data through human perception testing.

  13. Total systems design analysis of high performance structures

    NASA Technical Reports Server (NTRS)

    Verderaime, V.

    1993-01-01

    Designer-control parameters were identified at interdiscipline interfaces to optimize structural systems performance and downstream development and operations with reliability and least life-cycle cost. Interface tasks and iterations are tracked through a matrix of performance disciplines integration versus manufacturing, verification, and operations interactions for a total system design analysis. Performance integration tasks include shapes, sizes, environments, and materials. Integrity integrating tasks are reliability and recurring structural costs. Significant interface designer control parameters were noted as shapes, dimensions, probability range factors, and cost. Structural failure concept is presented, and first-order reliability and deterministic methods, benefits, and limitations are discussed. A deterministic reliability technique combining benefits of both is proposed for static structures which is also timely and economically verifiable. Though launch vehicle environments were primarily considered, the system design process is applicable to any surface system using its own unique filed environments.

  14. Strapdown system performance optimization test evaluations (SPOT), volume 1

    NASA Technical Reports Server (NTRS)

    Blaha, R. J.; Gilmore, J. P.

    1973-01-01

    A three axis inertial system was packaged in an Apollo gimbal fixture for fine grain evaluation of strapdown system performance in dynamic environments. These evaluations have provided information to assess the effectiveness of real-time compensation techniques and to study system performance tradeoffs to factors such as quantization and iteration rate. The strapdown performance and tradeoff studies conducted include: (1) Compensation models and techniques for the inertial instrument first-order error terms were developed and compensation effectivity was demonstrated in four basic environments; single and multi-axis slew, and single and multi-axis oscillatory. (2) The theoretical coning bandwidth for the first-order quaternion algorithm expansion was verified. (3) Gyro loop quantization was identified to affect proportionally the system attitude uncertainty. (4) Land navigation evaluations identified the requirement for accurate initialization alignment in order to pursue fine grain navigation evaluations.

  15. LCP- LIFETIME COST AND PERFORMANCE MODEL FOR DISTRIBUTED PHOTOVOLTAIC SYSTEMS

    NASA Technical Reports Server (NTRS)

    Borden, C. S.

    1994-01-01

    The Lifetime Cost and Performance (LCP) Model was developed to assist in the assessment of Photovoltaic (PV) system design options. LCP is a simulation of the performance, cost, and revenue streams associated with distributed PV power systems. LCP provides the user with substantial flexibility in specifying the technical and economic environment of the PV application. User-specified input parameters are available to describe PV system characteristics, site climatic conditions, utility purchase and sellback rate structures, discount and escalation rates, construction timing, and lifetime of the system. Such details as PV array orientation and tilt angle, PV module and balance-of-system performance attributes, and the mode of utility interconnection are user-specified. LCP assumes that the distributed PV system is utility grid interactive without dedicated electrical storage. In combination with a suitable economic model, LCP can provide an estimate of the expected net present worth of a PV system to the owner, as compared to electricity purchased from a utility grid. Similarly, LCP might be used to perform sensitivity analyses to identify those PV system parameters having significant impact on net worth. The user describes the PV system configuration to LCP via the basic electrical components. The module is the smallest entity in the PV system which is modeled. A PV module is defined in the simulation by its short circuit current, which varies over the system lifetime due to degradation and failure. Modules are wired in series to form a branch circuit. Bypass diodes are allowed between modules in the branch circuits. Branch circuits are then connected in parallel to form a bus. A collection of buses is connected in parallel to form an increment to capacity of the system. By choosing the appropriate series-parallel wiring design, the user can specify the current, voltage, and reliability characteristics of the system. LCP simulation of system performance is site

  16. Random vibration and the single degree-of-freedom vibratory system: A symbolic quantification of isolation and packaging performance

    SciTech Connect

    Redfield, R.C. . Dept. of Mechanical Engineering)

    1994-01-01

    With twenty years of research, active and semi-active systems have been shown to have certain performance advantages over passive suspensions in certain operating regimes. Chalasani and Redfield and Karnopp have shown that, depending on the performance index and weightings, active control improves performance from little to moderately. There are situations where passive control is quite satisfactory and the complexities and cost of more active means may not be warranted. To further the understanding of the tradeoffs involved and the performance potentials of active suspensions, this paper symbolically quantifies the isolation and stroke performance for a one degree-of-freedom vibratory system subject to a stochastic disturbance input acting through the suspension. The system of this paper models that of tracked vehicles and a class of isolation systems quite well. It also gives insight into low and high frequency performance for two degree-of-freedom systems such as a typical suspension model for automobiles, aircraft, and rail vehicles. Because of the nature of the single degree-of-freedom model, issues of handling cannot be readily addressed in this work. The 1 DOF model does not adequately predict dynamic tire forces. The main contributions of this work are the closed form symbolic solutions developed for optimal suspension response and the demonstration of the marked similarity between the frequency and mean square response of the 1 degree-of-freedom model of this paper and the more involved 2 degree-of-freedom model incorporating a so-called unsprung mass.''

  17. A New Model to Simulate Energy Performance of VRF Systems

    SciTech Connect

    Hong, Tianzhen; Pang, Xiufeng; Schetrit, Oren; Wang, Liping; Kasahara, Shinichi; Yura, Yoshinori; Hinokuma, Ryohei

    2014-03-30

    This paper presents a new model to simulate energy performance of variable refrigerant flow (VRF) systems in heat pump operation mode (either cooling or heating is provided but not simultaneously). The main improvement of the new model is the introduction of the evaporating and condensing temperature in the indoor and outdoor unit capacity modifier functions. The independent variables in the capacity modifier functions of the existing VRF model in EnergyPlus are mainly room wet-bulb temperature and outdoor dry-bulb temperature in cooling mode and room dry-bulb temperature and outdoor wet-bulb temperature in heating mode. The new approach allows compliance with different specifications of each indoor unit so that the modeling accuracy is improved. The new VRF model was implemented in a custom version of EnergyPlus 7.2. This paper first describes the algorithm for the new VRF model, which is then used to simulate the energy performance of a VRF system in a Prototype House in California that complies with the requirements of Title 24 ? the California Building Energy Efficiency Standards. The VRF system performance is then compared with three other types of HVAC systems: the Title 24-2005 Baseline system, the traditional High Efficiency system, and the EnergyStar Heat Pump system in three typical California climates: Sunnyvale, Pasadena and Fresno. Calculated energy savings from the VRF systems are significant. The HVAC site energy savings range from 51 to 85percent, while the TDV (Time Dependent Valuation) energy savings range from 31 to 66percent compared to the Title 24 Baseline Systems across the three climates. The largest energy savings are in Fresno climate followed by Sunnyvale and Pasadena. The paper discusses various characteristics of the VRF systems contributing to the energy savings. It should be noted that these savings are calculated using the Title 24 prototype House D under standard operating conditions. Actual performance of the VRF systems for real

  18. Integrated Flight Performance Analysis of a Launch Abort System Concept

    NASA Technical Reports Server (NTRS)

    Tartabini, Paul V.

    2007-01-01

    This paper describes initial flight performance analyses conducted early in the Orion Project to support concept feasibility studies for the Crew Exploration Vehicle s Launch Abort System (LAS). Key performance requirements that significantly affect abort capability are presented. These requirements have implications on sizing the Abort Motor, tailoring its thrust profile to meet escape requirements for both launch pad and high drag/high dynamic pressure ascent aborts. Additional performance considerations are provided for the Attitude Control Motor, a key element of the Orion LAS design that eliminates the need for ballast and provides performance robustness over a passive control approach. Finally, performance of the LAS jettison function is discussed, along with implications on Jettison Motor sizing and the timing of the jettison event during a nominal mission. These studies provide an initial understanding of LAS performance that will continue to evolve as the Orion design is matured.

  19. 5 CFR 430.204 - Agency performance appraisal system(s).

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 5 Administrative Personnel 1 2011-01-01 2011-01-01 false Agency performance appraisal system(s). 430.204 Section 430.204 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PERFORMANCE MANAGEMENT Performance Appraisal for General Schedule, Prevailing Rate, and Certain Other Employees § 430.204 Agency...

  20. How Adequate is the Concept of Perceptual Deficit for Education?

    ERIC Educational Resources Information Center

    Zach, Lillian; Kaufman, Judith

    1972-01-01

    Performances on the Bender Visual Motor Gestalt Test and on a visual discrimination task using the same forms were found not to be related. Implication for identification of perceptual deficiencies and subsequent perceptual training are discussed. (KW)

  1. A decision support system for assessing landfill performance

    SciTech Connect

    Celik, Basak; Girgin, Sertan; Yazici, Adnan; Unlue, Kahraman

    2010-01-15

    Designing environmentally sound landfills is a challenging engineering task due to complex interactions of numerous design variables; such as landfill size, waste characteristics, and site hydrogeology. Decision support systems (DSS) can be utilized to handle these complex interactions and to aid in a performance-based landfill design by coupling system simulation models (SSM). The aim of this paper is to present a decision support system developed for a performance-based landfill design. The developed DSS is called Landfill Design Decision Support System - LFDSS. A two-step DSS framework, composed of preliminary design and detailed design phases, is set to effectively couple and run the SSMs and calculation modules. In preliminary design phase, preliminary design alternatives are proposed using general site data. In detailed design phase, proposed design alternatives are further simulated under site-specific data using SSMs for performance evaluation. LFDSS calculates the required landfill volume, performs landfill base contour design, proposes preliminary design alternatives based on general site conditions, evaluates the performance of the proposed designs, calculates the factor of safety values for slope stability analyses, and performs major cost calculations. The DSS evaluates the results of all landfill design alternatives, and determines whether the design satisfies the predefined performance criteria. The DSS ultimately enables comparisons among different landfill designs based on their performances (i.e. leachate head stability, and groundwater contamination), constructional stability and costs. The developed DSS was applied to a real site, and the results demonstrated the strengths of the developed system on designing environmentally sound and feasible landfills.

  2. Perform - A performance optimizing computer program for dynamic systems subject to transient loadings

    NASA Technical Reports Server (NTRS)

    Pilkey, W. D.; Wang, B. P.; Yoo, Y.; Clark, B.

    1973-01-01

    A description and applications of a computer capability for determining the ultimate optimal behavior of a dynamically loaded structural-mechanical system are presented. This capability provides characteristics of the theoretically best, or limiting, design concept according to response criteria dictated by design requirements. Equations of motion of the system in first or second order form include incompletely specified elements whose characteristics are determined in the optimization of one or more performance indices subject to the response criteria in the form of constraints. The system is subject to deterministic transient inputs, and the computer capability is designed to operate with a large linear programming on-the-shelf software package which performs the desired optimization. The report contains user-oriented program documentation in engineering, problem-oriented form. Applications cover a wide variety of dynamics problems including those associated with such diverse configurations as a missile-silo system, impacting freight cars, and an aircraft ride control system.

  3. The NetLogger Methodology for High Performance Distributed Systems Performance Analysis

    SciTech Connect

    Tierney, Brian; Johnston, William; Crowley, Brian; Hoo, Gary; Brooks, Chris; Gunter, Dan

    1999-12-23

    The authors describe a methodology that enables the real-time diagnosis of performance problems in complex high-performance distributed systems. The methodology includes tools for generating precision event logs that can be used to provide detailed end-to-end application and system level monitoring; a Java agent-based system for managing the large amount of logging data; and tools for visualizing the log data and real-time state of the distributed system. The authors developed these tools for analyzing a high-performance distributed system centered around the transfer of large amounts of data at high speeds from a distributed storage server to a remote visualization client. However, this methodology should be generally applicable to any distributed system. This methodology, called NetLogger, has proven invaluable for diagnosing problems in networks and in distributed systems code. This approach is novel in that it combines network, host, and application-level monitoring, providing a complete view of the entire system.

  4. Integrated heat pipe-thermal storage system performance evaluation

    NASA Technical Reports Server (NTRS)

    Keddy, E.; Sena, J. T.; Merrigan, M.; Heidenreich, Gary

    1987-01-01

    An integrated thermal energy storage (TES) system, developed as a part of an organic Rankine cycle solar dynamic power system is described, and the results of the performance verification tests of this TES system are presented. The integrated system consists of potassium heat-pipe elements that incorporate TES canisters within the vapor space, along with an organic fluid heater tube used as the condenser region of the heat pipe. The heat pipe assembly was operated through the range of design conditions from the nominal design input of 4.8 kW to a maximum of 5.7 kW. The performance verification tests show that the system meets the functional requirements of absorbing the solar energy reflected by the concentrator, transporting the energy to the organic Rankine heater, providing thermal storage for the eclipse phase, and allowing uniform discharge from the thermal storage to the heater.

  5. Design and Performance Analysis of Incremental Networked Predictive Control Systems.

    PubMed

    Pang, Zhong-Hua; Liu, Guo-Ping; Zhou, Donghua

    2016-06-01

    This paper is concerned with the design and performance analysis of networked control systems with network-induced delay, packet disorder, and packet dropout. Based on the incremental form of the plant input-output model and an incremental error feedback control strategy, an incremental networked predictive control (INPC) scheme is proposed to actively compensate for the round-trip time delay resulting from the above communication constraints. The output tracking performance and closed-loop stability of the resulting INPC system are considered for two cases: 1) plant-model match case and 2) plant-model mismatch case. For the former case, the INPC system can achieve the same output tracking performance and closed-loop stability as those of the corresponding local control system. For the latter case, a sufficient condition for the stability of the closed-loop INPC system is derived using the switched system theory. Furthermore, for both cases, the INPC system can achieve a zero steady-state output tracking error for step commands. Finally, both numerical simulations and practical experiments on an Internet-based servo motor system illustrate the effectiveness of the proposed method. PMID:26186798

  6. Physical Protection System Upgrades - Optimizing for Performance and Cost

    SciTech Connect

    Bouchard, Ann M.; Hicks, Mary Jane

    1999-07-09

    CPA--Cost and Performance Analysis--is an architecture that supports analysis of physical protection systems and upgrade options. ASSESS (Analytic System and Software for Evaluating Security Systems), a tool for evaluating performance of physical protection systems, currently forms the cornerstone for evaluating detection probabilities and delay times of the system. Cost and performance data are offered to the decision-maker at the systems level and to technologists at the path-element level. A new optimization engine has been attached to the CPA methodology to automate analyses of many combinations (portfolios) of technologies. That engine controls a new analysis sequencer that automatically modifies ASSESS PPS files (facility descriptions), automatically invokes ASSESS Outsider analysis and then saves results for post-processing. Users can constrain the search to an upper bound on total cost, to a lower bound on level of performance, or to include specific technologies or technology types. This process has been applied to a set of technology development proposals to identify those portfolios that provide the most improvement in physical security for the lowest cost to install, operate and maintain at a baseline facility.

  7. Integrated modeling tool for performance engineering of complex computer systems

    NASA Technical Reports Server (NTRS)

    Wright, Gary; Ball, Duane; Hoyt, Susan; Steele, Oscar

    1989-01-01

    This report summarizes Advanced System Technologies' accomplishments on the Phase 2 SBIR contract NAS7-995. The technical objectives of the report are: (1) to develop an evaluation version of a graphical, integrated modeling language according to the specification resulting from the Phase 2 research; and (2) to determine the degree to which the language meets its objectives by evaluating ease of use, utility of two sets of performance predictions, and the power of the language constructs. The technical approach followed to meet these objectives was to design, develop, and test an evaluation prototype of a graphical, performance prediction tool. The utility of the prototype was then evaluated by applying it to a variety of test cases found in the literature and in AST case histories. Numerous models were constructed and successfully tested. The major conclusion of this Phase 2 SBIR research and development effort is that complex, real-time computer systems can be specified in a non-procedural manner using combinations of icons, windows, menus, and dialogs. Such a specification technique provides an interface that system designers and architects find natural and easy to use. In addition, PEDESTAL's multiview approach provides system engineers with the capability to perform the trade-offs necessary to produce a design that meets timing performance requirements. Sample system designs analyzed during the development effort showed that models could be constructed in a fraction of the time required by non-visual system design capture tools.

  8. A Hybrid Actuation System Demonstrating Significantly Enhanced Electromechanical Performance

    NASA Technical Reports Server (NTRS)

    Su, Ji; Xu, Tian-Bing; Zhang, Shujun; Shrout, Thomas R.; Zhang, Qiming

    2004-01-01

    A hybrid actuation system (HYBAS) utilizing advantages of a combination of electromechanical responses of an electroactive polymer (EAP), an electrostrictive copolymer, and an electroactive ceramic single crystal, PZN-PT single crystal, has been developed. The system employs the contribution of the actuation elements cooperatively and exhibits a significantly enhanced electromechanical performance compared to the performances of the device made of each constituting material, the electroactive polymer or the ceramic single crystal, individually. The theoretical modeling of the performances of the HYBAS is in good agreement with experimental observation. The consistence between the theoretical modeling and experimental test make the design concept an effective route for the development of high performance actuating devices for many applications. The theoretical modeling, fabrication of the HYBAS and the initial experimental results will be presented and discussed.

  9. The effect of bandwidth on telerobot system performance

    NASA Technical Reports Server (NTRS)

    Uebel, Mark; Ali, Michael S.; Minis, Ioannis

    1991-01-01

    The purpose of the experiment was to determine the effect that various slave-joint bandwidths have on telerobot system performance. The telerobot system consisted of a slave arm controlled by a master. The slave incorporated an impedance loop to provide local compliance in addition to the compliance provided by the operator via force feedback. Three joint bandwidths, 0.5, 1.0, and 2.0 Hz, were used. The performance measures were the task completion time and the sums of the squared forces and moments exerted on the environment. The task consisted of peg-in-hole insertion and removal. The results of the experiment indicate a significant performance decrease at 0.5-Hz bandwidth relative to the 1- and 2-Hz bandwidths. There was no significant change in performance between the 1- and 2-Hz bandwidths.

  10. Performance limitations for networked control systems with plant uncertainty

    NASA Astrophysics Data System (ADS)

    Chi, Ming; Guan, Zhi-Hong; Cheng, Xin-Ming; Yuan, Fu-Shun

    2016-04-01

    There has recently been significant interest in performance study for networked control systems with communication constraints. But the existing work mainly assumes that the plant has an exact model. The goal of this paper is to investigate the optimal tracking performance for networked control system in the presence of plant uncertainty. The plant under consideration is assumed to be non-minimum phase and unstable, while the two-parameter controller is employed and the integral square criterion is adopted to measure the tracking error. And we formulate the uncertainty by utilising stochastic embedding. The explicit expression of the tracking performance has been obtained. The results show that the network communication noise and the model uncertainty, as well as the unstable poles and non-minimum phase zeros, can worsen the tracking performance.

  11. First performance of the GeMS+GMOS system

    NASA Astrophysics Data System (ADS)

    Hibon, Pascale; Neichel, Benoit; Garrel, Vincent; Prout, Benjamin; Rigaut, Francois; Koning, Alice; Sivo, Gaetano; Gimeno, German; Carrasco, Rodrigo; Winge, Claudia; Pessev, Peter; Serio, Andrew; Arriagada, Gustavo

    2014-08-01

    During the 2012 commissioning of the Gemini MCAO System (GeMS) in Gemini South Observatory, we briefly explored the performance improvement brought by pairing GeMS with the Gemini Multi-Object Spectrograph (GMOS), compared to GMOS in natural seeing mode. GMOS is an instrument sensitive in the visible band with imaging and spectroscopic capabilities, hence pushing MCAO toward the visible, a mode for which it was not specifically designed. We report in this paper the first results obtained with the GeMS +GMOS pair. Several globular clusters were observed in imaging mode only. We have derived performance in term of FWHM and determined the improvement against natural seeing. We also obtain photometric, relative and absolute astrometric precision for the AO enhanced images. We also studied the influence of the NGS constellation on the photometric performance. Finally, we also looked at the expected performance of the GeMS+GMOS system once the CCD upgrade, scheduled during 2014, will occur.

  12. Generic CSP Performance Model for NREL's System Advisor Model: Preprint

    SciTech Connect

    Wagner, M. J.; Zhu, G.

    2011-08-01

    The suite of concentrating solar power (CSP) modeling tools in NREL's System Advisor Model (SAM) includes technology performance models for parabolic troughs, power towers, and dish-Stirling systems. Each model provides the user with unique capabilities that are catered to typical design considerations seen in each technology. Since the scope of the various models is generally limited to common plant configurations, new CSP technologies, component geometries, and subsystem combinations can be difficult to model directly in the existing SAM technology models. To overcome the limitations imposed by representative CSP technology models, NREL has developed a 'Generic Solar System' (GSS) performance model for use in SAM. This paper discusses the formulation and performance considerations included in this model and verifies the model by comparing its results with more detailed models.

  13. Geotechnical Issues in Total System Performance Assessments of Yucca Mountain

    SciTech Connect

    HO,CLIFFORD K.; HOUSEWORTH,JIM; WILSON,MICHAEL L.

    1999-12-21

    A Total System Performance Assessment (TSPA) of Yucca Mountain consists of integrated sub-models and analyses of natural and engineered systems. Examples of subsystem models include unsaturated-zone flow and transport, seepage into drifts, coupled thermal hydrologic processes, transport through the engineered barrier system, and saturated-zone flow and transport. The TSPA evaluates the interaction of important processes among these subsystems, and it determines the impact of these processes on the overall performance measures (e.g., dose rate to humans). This paper summarizes the evaluation, abstraction, and combination of these subsystem models in a TSPA calculation, and it provides background on the individual TSPA subsystem components that are most directly impacted by geotechnical issues. The potential impact that geologic features, events, and processes have on the overall performance is presented, and an evaluation of the sensitivity of TSPA calculations to these issues is also provided.

  14. Thermodynamic performance testing of the orbiter flash evaporator system

    NASA Technical Reports Server (NTRS)

    Jaax, J. R.; Melgares, M. A.; Frahm, J. P.

    1980-01-01

    System level testing of the space shuttle orbiter's development flash evaporator system (FES) was performed in a thermal vacuum chamber capable of simulating ambient ascent, orbital, and entry temperature and pressure profiles. The test article included the evaporator assembly, high load and topping exhaust duct and nozzle assemblies, and feedwater supply assembly. Steady state and transient heat load, water pressure/temperature and ambient pressure/temperature profiles were imposed by especially designed supporting test hardware. Testing in 1978 verified evaporator and duct heater thermal design, determined FES performance boundaries, and assessed topping evaporator plume characteristics. Testing in 1979 combined the FES with the other systems in the orbiter active thermal control subsystem (ATCS). The FES met or exceeded all nominal and contingency performance requirements during operation with the integrated ATCS. During both tests stability problems were encountered during steady state operations which resulted in subsequent design changes to the water spray nozzle and valve plate assemblies.

  15. Solar cooling system performance, Frenchman's Reef Hotel, Virgin Islands

    NASA Technical Reports Server (NTRS)

    Harber, H.

    1981-01-01

    The operational and thermal performance of a variety of solar systems are described. The Solar Cooling System was installed in a hotel at St. Thomas, U. S. Virgin Islands. The system consists of the evacuated glass tube collectors, two 2500 gallon tanks, pumps, computerized controller, a large solar optimized industrial sized lithium bromide absorption chiller, and associated plumbing. Solar heated water is pumped through the system to the designed public areas such as lobby, lounges, restaurant and hallways. Auxiliary heat is provided by steam and a heat exchanger to supplement the solar heat.

  16. Solar cooling system performance, Frenchman's Reef Hotel, Virgin Islands

    NASA Astrophysics Data System (ADS)

    Harber, H.

    1981-09-01

    The operational and thermal performance of a variety of solar systems are described. The Solar Cooling System was installed in a hotel at St. Thomas, U. S. Virgin Islands. The system consists of the evacuated glass tube collectors, two 2500 gallon tanks, pumps, computerized controller, a large solar optimized industrial sized lithium bromide absorption chiller, and associated plumbing. Solar heated water is pumped through the system to the designed public areas such as lobby, lounges, restaurant and hallways. Auxiliary heat is provided by steam and a heat exchanger to supplement the solar heat.

  17. Assessment of Septic System Performance Using Remote Sensing Technology

    NASA Astrophysics Data System (ADS)

    Patterson, A.; Kuszmaul, J. S.; Harvey, C.

    2005-12-01

    Failing and improperly managed septic systems can affect water quality and cause health problems for individuals, community residents, and wildlife. Early detection of septic system leakage and failure can limit the extent off-site contamination. State and county health agencies are typically responsible for permitting and regulating septic systems, and they rely on onsite inspection to identify malfunctioning systems. External symptoms which occur over an improperly functioning septic system can include lush or greener growth of vegetation, distress of vegetation, excessive soil moisture levels, or pooling of surface effluent. The use of remote sensing technologies coupled with attainable permit records to identify these features will enable the appropriate agencies to target problem areas without extensive field inspection. High-resolution thermal and color-infrared imagery were acquired in May 2005 for a study area in Jackson County, Mississippi, adjacent to the Gulf of Mexico. Within this coastal neighborhood known to have significant septic system failures, volunteers supplied information regarding the function of their systems by completing a survey and allowing access to their property. For each of 36 data locations, a septic system score was calculated to indicate the level of system performance. Potential predictors of system performance were derived from data obtained from installation records and data extracted from imagery. Linear regression analyses of the dataset identified the significant predictors of septic system performance, and two models have been developed and proposed for the prioritization of problem septic systems by regulatory agencies. The Drain Field Model was developed using linear regression. Vegetative Index and Normalized Differential Vegetative Index were identified as the best predictors of system performance. The model considers the maximum values of the VI and NDVI within each drain field and calculates a score for each system

  18. Scyld Beowulf: A Standard, High-Performance Cluster Operating System

    NASA Astrophysics Data System (ADS)

    Becker, Donald

    2001-06-01

    Beowulf systems are high performance computers constructed from commodity hardware connected by a private internal network. Scyld Beowulf is a new generation Beowulf cluster operating system that presents this collection of machines as a single system. New features such as a unified process space, node scheduler, and integrated libraries reduce the complexity of building and using cluster applications. This talk will describe how the Scyld Beowulf system works, how we use it to simplify installation, administration and running applications, and the architectural model and interface it provides to application developers and end users.

  19. Performance analysis of static locking in replicated distributed database systems

    NASA Technical Reports Server (NTRS)

    Kuang, Yinghong; Mukkamala, Ravi

    1991-01-01

    Data replications and transaction deadlocks can severely affect the performance of distributed database systems. Many current evaluation techniques ignore these aspects, because it is difficult to evaluate through analysis and time consuming to evaluate through simulation. Here, a technique is discussed that combines simulation and analysis to closely illustrate the impact of deadlock and evaluate performance of replicated distributed databases with both shared and exclusive locks.

  20. Performance analysis of static locking in replicated distributed database systems

    NASA Technical Reports Server (NTRS)

    Kuang, Yinghong; Mukkamala, Ravi

    1991-01-01

    Data replication and transaction deadlocks can severely affect the performance of distributed database systems. Many current evaluation techniques ignore these aspects, because it is difficult to evaluate through analysis and time consuming to evaluate through simulation. A technique is used that combines simulation and analysis to closely illustrate the impact of deadlock and evaluate performance of replicated distributed database with both shared and exclusive locks.