Science.gov

Sample records for adi solution procedure

  1. Second-order non-iterative ADI solution of non-linear partial differential equations. [Alternating Direction Implicit scheme

    NASA Technical Reports Server (NTRS)

    Wolfshtein, M.; Hirsh, R. S.; Pitts, B. H.

    1975-01-01

    A new method for the solution of non-linear partial differential equations by an ADI procedure is described. Although the method is second order accurate in time, it does not require either iterations or predictor corrector methods to overcome the nonlinearity of the equations. Thus the computational effort required for the solution of the non-linear problem becomes similar to that required for the linear case. The method is applied to a two-dimensional 'extended Burgers equation'. Linear stability is studied, and some numerical solutions obtained. The improved accuracy obtained by the 2nd order truncation error is clearly manifested.

  2. Holmes-Adie Syndrome

    MedlinePlus

    ... Awards Enhancing Diversity Find People About NINDS NINDS Holmes-Adie syndrome Information Page Synonym(s): Adie's Syndrome, Adie's ... research is being done? Clinical Trials What is Holmes-Adie syndrome ? Holmes-Adie syndrome (HAS) is a ...

  3. Recent ADI iteration analysis and results

    SciTech Connect

    Wachspress, E.L.

    1994-12-31

    Some recent ADI iteration analysis and results are discussed. Discovery that the Lyapunov and Sylvester matrix equations are model ADI problems stimulated much research on ADI iteration with complex spectra. The ADI rational Chebyshev analysis parallels the classical linear Chebyshev theory. Two distinct approaches have been applied to these problems. First, parameters which were optimal for real spectra were shown to be nearly optimal for certain families of complex spectra. In the linear case these were spectra bounded by ellipses in the complex plane. In the ADI rational case these were spectra bounded by {open_quotes}elliptic-function regions{close_quotes}. The logarithms of the latter appear like ellipses, and the logarithms of the optimal ADI parameters for these regions are similar to the optimal parameters for linear Chebyshev approximation over superimposed ellipses. W.B. Jordan`s bilinear transformation of real variables to reduce the two-variable problem to one variable was generalized into the complex plane. This was needed for ADI iterative solution of the Sylvester equation.

  4. Combined LAURA-UPS hypersonic solution procedure

    NASA Technical Reports Server (NTRS)

    Wood, William A.; Thompson, Richard A.

    1993-01-01

    A combined solution procedure for hypersonic flowfields around blunted slender bodies was implemented using a thin-layer Navier-Stokes code (LAURA) in the nose region and a parabolized Navier-Stokes code (UPS) on the after body region. Perfect gas, equilibrium air, and non-equilibrium air solutions to sharp cones and a sharp wedge were obtained using UPS alone as a preliminary step. Surface heating rates are presented for two slender bodies with blunted noses, having used LAURA to provide a starting solution to UPS downstream of the sonic line. These are an 8 deg sphere-cone in Mach 5, perfect gas, laminar flow at 0 and 4 deg angles of attack and the Reentry F body at Mach 20, 80,000 ft equilibrium gas conditions for 0 and 0.14 deg angles of attack. The results indicate that this procedure is a timely and accurate method for obtaining aerothermodynamic predictions on slender hypersonic vehicles.

  5. Sweet solutions for procedural pain in infants.

    PubMed

    2013-08-01

    A sweet solution, such as sucrose or glucose, can be used for analgesia for minor short term procedural pain, such as immunisation, in infants up to 12 months of age. The sweet solution is given orally and provides short term analgesia. It has National Health and Medical Research Council (NHMRC) Level I evidence of efficacy and no serious adverse effects have been reported. This article is part of a series on non drug treatments summarising indications, considerations, evidence and where clinicians and patients can get further information. PMID:23971067

  6. Staggered solution procedures for multibody dynamics simulation

    NASA Technical Reports Server (NTRS)

    Park, K. C.; Chiou, J. C.; Downer, J. D.

    1990-01-01

    The numerical solution procedure for multibody dynamics (MBD) systems is termed a staggered MBD solution procedure that solves the generalized coordinates in a separate module from that for the constraint force. This requires a reformulation of the constraint conditions so that the constraint forces can also be integrated in time. A major advantage of such a partitioned solution procedure is that additional analysis capabilities such as active controller and design optimization modules can be easily interfaced without embedding them into a monolithic program. After introducing the basic equations of motion for MBD system in the second section, Section 3 briefly reviews some constraint handling techniques and introduces the staggered stabilized technique for the solution of the constraint forces as independent variables. The numerical direct time integration of the equations of motion is described in Section 4. As accurate damping treatment is important for the dynamics of space structures, we have employed the central difference method and the mid-point form of the trapezoidal rule since they engender no numerical damping. This is in contrast to the current practice in dynamic simulations of ground vehicles by employing a set of backward difference formulas. First, the equations of motion are partitioned according to the translational and the rotational coordinates. This sets the stage for an efficient treatment of the rotational motions via the singularity-free Euler parameters. The resulting partitioned equations of motion are then integrated via a two-stage explicit stabilized algorithm for updating both the translational coordinates and angular velocities. Once the angular velocities are obtained, the angular orientations are updated via the mid-point implicit formula employing the Euler parameters. When the two algorithms, namely, the two-stage explicit algorithm for the generalized coordinates and the implicit staggered procedure for the constraint Lagrange

  7. Interactive solution-adaptive grid generation procedure

    NASA Technical Reports Server (NTRS)

    Henderson, Todd L.; Choo, Yung K.; Lee, Ki D.

    1992-01-01

    TURBO-AD is an interactive solution adaptive grid generation program under development. The program combines an interactive algebraic grid generation technique and a solution adaptive grid generation technique into a single interactive package. The control point form uses a sparse collection of control points to algebraically generate a field grid. This technique provides local grid control capability and is well suited to interactive work due to its speed and efficiency. A mapping from the physical domain to a parametric domain was used to improve difficulties encountered near outwardly concave boundaries in the control point technique. Therefore, all grid modifications are performed on the unit square in the parametric domain, and the new adapted grid is then mapped back to the physical domain. The grid adaption is achieved by adapting the control points to a numerical solution in the parametric domain using control sources obtained from the flow properties. Then a new modified grid is generated from the adapted control net. This process is efficient because the number of control points is much less than the number of grid points and the generation of the grid is an efficient algebraic process. TURBO-AD provides the user with both local and global controls.

  8. NIF Anti-Reflective Coating Solutions: Preparation, Procedures and Specifications

    SciTech Connect

    Suratwala, T; Carman, L; Thomas, I

    2003-07-01

    The following document contains a detailed description of the preparation procedures for the antireflective coating solutions used for NIF optics. This memo includes preparation procedures for the coating solutions (sections 2.0-4.0), specifications and vendor information of the raw materials used and on all equipment used (section 5.0), and QA specifications (section 6.0) and procedures (section 7.0) to determine quality and repeatability of all the coating solutions. There are different five coating solutions that will be used to coat NIF optics. These solutions are listed below: (1) Colloidal silica (3%) in ethanol (2) Colloidal silica (2%) in sec-butanol (3) Colloidal silica (9%) in sec-butanol (deammoniated) (4) HMDS treated silica (10%) in decane (5) GR650 (3.3%) in ethanol/sec-butanol The names listed above are to be considered the official name for the solution. They will be referred to by these names in the remainder of this document. Table 1 gives a summary of all the optics to be coated including: (1) the surface to be coated; (2) the type of solution to be used; (3) the coating method (meniscus, dip, or spin coating) to be used; (4) the type of coating (broadband, 1?, 2?, 3?) to be made; (5) number of optics to be coated; and (6) the type of post processing required (if any). Table 2 gives a summary of the batch compositions and measured properties of all five of these solutions.

  9. A Procedure for Identifying Problems and Solutions in Desegregated Schools.

    ERIC Educational Resources Information Center

    Uhl, Norman P.

    The purpose of this study was to investigate the usefulness of a procedure (a modification of the Delphi technique) for identifying racially-related problems and achieving some consensus on solutions to these problems among students, parents, and the school staff. The students who participated attended six classes which were selected to provide a…

  10. Examples of Solutions for Steel-Concrete Composite Structures in Bridge Engineering / Przykłady Konstrukcji Zespolonych W Budownictwie Mostowym

    NASA Astrophysics Data System (ADS)

    Flaga, Kazimierz; Furtak, Kazimierz

    2015-03-01

    The aim of the article [1] was to discuss the application of steel-concrete composite structures in bridge engineering in the aspect of structural design, analysis and execution. It was pointed out that the concept of steel-concrete structural composition is far from exhausted and new solutions interesting from the engineering, scientific and aesthetic points of view of are constantly emerging. These latest trends are presented against the background of the solutions executed in Poland and abroad. Particular attention is focused on structures of double composition and steel-concrete structures. Concrete filled steel tubular (CFST) structures are highlighted. W artykule [1] omówiono problemy konstrukcyjne, obliczeniowe i realizacyjne, związane z zastosowaniem konstrukcji zespolonych stal-beton w mostownictwie. Wskazano tam, że idea konstrukcyjnego zespolenia stali z betonem jest jeszcze daleka do wyczerpania i że wciąż pojawiają się nowe rozwiązania interesujące z inżynierskiego, naukowego i estetycznego punktu widzenia. W artykule niniejszym pokazano te nowoczesne trendy na tle rozwiązań zrealizowanych w Polsce i na świecie. Szczególną uwagę poświęcono konstrukcjom podwójnie zespolonym oraz konstrukcjom stalowobetonowym. Wyeksponowano tu szczególnie konstrukcje z rur stalowych wypełnionych betonem, typu CFST. Dają one nadzieję na ich szersze zastosowanie w warunkach polskich.

  11. a Procedural Solution to Model Roman Masonry Structures

    NASA Astrophysics Data System (ADS)

    Cappellini, V.; Saleri, R.; Stefani, C.; Nony, N.; De Luca, L.

    2013-07-01

    The paper will describe a new approach based on the development of a procedural modelling methodology for archaeological data representation. This is a custom-designed solution based on the recognition of the rules belonging to the construction methods used in roman times. We have conceived a tool for 3D reconstruction of masonry structures starting from photogrammetric surveying. Our protocol considers different steps. Firstly we have focused on the classification of opus based on the basic interconnections that can lead to a descriptive system used for their unequivocal identification and design. Secondly, we have chosen an automatic, accurate, flexible and open-source photogrammetric pipeline named Pastis Apero Micmac - PAM, developed by IGN (Paris). We have employed it to generate ortho-images from non-oriented images, using a user-friendly interface implemented by CNRS Marseille (France). Thirdly, the masonry elements are created in parametric and interactive way, and finally they are adapted to the photogrammetric data. The presented application, currently under construction, is developed with an open source programming language called Processing, useful for visual, animated or static, 2D or 3D, interactive creations. Using this computer language, a Java environment has been developed. Therefore, even if the procedural modelling reveals an accuracy level inferior to the one obtained by manual modelling (brick by brick), this method can be useful when taking into account the static evaluation on buildings (requiring quantitative aspects) and metric measures for restoration purposes.

  12. Intermediate boundary conditions for LOD, ADI and approximate factorization methods

    NASA Technical Reports Server (NTRS)

    Leveque, R. J.

    1985-01-01

    A general approach to determining the correct intermediate boundary conditions for dimensional splitting methods is presented. The intermediate solution U is viewed as a second order accurate approximation to a modified equation. Deriving the modified equation and using the relationship between this equation and the original equation allows us to determine the correct boundary conditions for U*. This technique is illustrated by applying it to locally one dimensional (LOD) and alternating direction implicit (ADI) methods for the heat equation in two and three space dimensions. The approximate factorization method is considered in slightly more generality.

  13. Measuring space radiation with ADIS instruments

    NASA Astrophysics Data System (ADS)

    Connell, J. J.; Lopate, C.; McKibben, R. B.; Merk, J.

    2010-09-01

    Measurements of radiation in space, cosmic rays and Solar energetic particles, date back to the dawn of space flight. Solid state detectors, the basis of most modern high energy charged particle instruments, first flew in space in the 1960's. Modern particle spectrometers, such as ACE/CRIS, ACE/SIS and Ulysses/HET, can measure the elemental and isotopic composition of ions through the iron peak. This is achieved by using position sensing detectors (PSD's) arranged into hodoscopes to measure particle trajectories through the instrument, allowing for pathlength corrections to energy loss measurements. The Angle Detecting Inclined Sensor (ADIS) technique measures particle angle of incidence using a simple system of detectors inclined to the instrument axis. It achieves elemental resolution well beyond iron, and isotopic resolution for moderate mass elements without the complexity of position sensing detectors. An ADIS instrument was selected to fly as the High Energy Particle Sensor (HEPS) on NPOESS, but was de-scoped with the rest of the space weather suite. Another ADIS instrument, the Energetic Heavy Ion Sensor (EHIS), is being developed for GOES-R. UNH has built and tested a engineering unit of the EHIS. Applications for manned dosimetery on the Crew Exploration Vehicle (CEV) are also being explored. The basic ADIS technique is explained and accelerator data for heavy ions shown.

  14. A mineral separation procedure using hot Clerici solution

    USGS Publications Warehouse

    Rosenblum, Sam

    1974-01-01

    Careful boiling of Clerici solution in a Pyrex test tube in an oil bath is used to float minerals with densities up to 5.0 in order to obtain purified concentrates of monazite (density 5.1) for analysis. The "sink" and "float" fractions are trapped in solidified Clerici salts on rapid chilling, and the fractions are washed into separate filter papers with warm water. The hazardous nature of Clerici solution requires unusual care in handling.

  15. Element-by-element Solution Procedures for Nonlinear Structural Analysis

    NASA Technical Reports Server (NTRS)

    Hughes, T. J. R.; Winget, J. M.; Levit, I.

    1984-01-01

    Element-by-element approximate factorization procedures are proposed for solving the large finite element equation systems which arise in nonlinear structural mechanics. Architectural and data base advantages of the present algorithms over traditional direct elimination schemes are noted. Results of calculations suggest considerable potential for the methods described.

  16. Measurement of Actinides in Molybdenum-99 Solution Analytical Procedure

    SciTech Connect

    Soderquist, Chuck Z.; Weaver, Jamie L.

    2015-11-01

    This document is a companion report to a previous report, PNNL 24519, Measurement of Actinides in Molybdenum-99 Solution, A Brief Review of the Literature, August 2015. In this companion report, we report a fast, accurate, newly developed analytical method for measurement of trace alpha-emitting actinide elements in commercial high-activity molybdenum-99 solution. Molybdenum-99 is widely used to produce 99mTc for medical imaging. Because it is used as a radiopharmaceutical, its purity must be proven to be extremely high, particularly for the alpha emitting actinides. The sample of 99Mo solution is measured into a vessel (such as a polyethylene centrifuge tube) and acidified with dilute nitric acid. A gadolinium carrier is added (50 µg). Tracers and spikes are added as necessary. Then the solution is made strongly basic with ammonium hydroxide, which causes the gadolinium carrier to precipitate as hydrous Gd(OH)3. The precipitate of Gd(OH)3 carries all of the actinide elements. The suspension of gadolinium hydroxide is then passed through a membrane filter to make a counting mount suitable for direct alpha spectrometry. The high-activity 99Mo and 99mTc pass through the membrane filter and are separated from the alpha emitters. The gadolinium hydroxide, carrying any trace actinide elements that might be present in the sample, forms a thin, uniform cake on the surface of the membrane filter. The filter cake is first washed with dilute ammonium hydroxide to push the last traces of molybdate through, then with water. The filter is then mounted on a stainless steel counting disk. Finally, the alpha emitting actinide elements are measured by alpha spectrometry.

  17. An iterative transformation procedure for numerical solution of flutter and similar characteristics-value problems

    NASA Technical Reports Server (NTRS)

    Gossard, Myron L

    1952-01-01

    An iterative transformation procedure suggested by H. Wielandt for numerical solution of flutter and similar characteristic-value problems is presented. Application of this procedure to ordinary natural-vibration problems and to flutter problems is shown by numerical examples. Comparisons of computed results with experimental values and with results obtained by other methods of analysis are made.

  18. A Two Stage Solution Procedure for Production Planning System with Advance Demand Information

    NASA Astrophysics Data System (ADS)

    Ueno, Nobuyuki; Kadomoto, Kiyotaka; Hasuike, Takashi; Okuhara, Koji

    We model for ‘Naiji System’ which is a unique corporation technique between a manufacturer and suppliers in Japan. We propose a two stage solution procedure for a production planning problem with advance demand information, which is called ‘Naiji’. Under demand uncertainty, this model is formulated as a nonlinear stochastic programming problem which minimizes the sum of production cost and inventory holding cost subject to a probabilistic constraint and some linear production constraints. By the convexity and the special structure of correlation matrix in the problem where inventory for different periods is not independent, we propose a solution procedure with two stages which are named Mass Customization Production Planning & Management System (MCPS) and Variable Mesh Neighborhood Search (VMNS) based on meta-heuristics. It is shown that the proposed solution procedure is available to get a near optimal solution efficiently and practical for making a good master production schedule in the suppliers.

  19. A block-corrected subdomain solution procedure for recirculating flow calculations

    NASA Technical Reports Server (NTRS)

    Braaten, M. E.; Patankar, S. V.

    1989-01-01

    This paper describes a robust and efficient subdomain solution procedure for two-dimensional recirculating flows. The solution domain is divided into a number of overlapping subdomains, and a direct fully coupled solution is obtained for each subdomain using a sparse matrix form of LU decomposition. An effective parabolic block correction procedure, which calculates global corrections to the tentative solution by a marching technique similar to that used for boundary layer flows, is used to accelerate the convergence of the basic procedure. The use of effective block correction is found to be essential for the success of the subdomain approach on strongly recirculating flows. In a number of laminar two-dimensional flows, the new block-corrected method performed extremely well, rivaling the best direct methods in execution time, while requiring substantially less computer storage. The new method proved to be from two to ten times faster than conventional iterative methods, while requiring only a moderate increase in storage.

  20. An ADI extrapolated Crank-Nicolson orthogonal spline collocation method for nonlinear reaction-diffusion systems

    NASA Astrophysics Data System (ADS)

    Fernandes, Ryan I.; Fairweather, Graeme

    2012-08-01

    An alternating direction implicit (ADI) orthogonal spline collocation (OSC) method is described for the approximate solution of a class of nonlinear reaction-diffusion systems. Its efficacy is demonstrated on the solution of well-known examples of such systems, specifically the Brusselator, Gray-Scott, Gierer-Meinhardt and Schnakenberg models, and comparisons are made with other numerical techniques considered in the literature. The new ADI method is based on an extrapolated Crank-Nicolson OSC method and is algebraically linear. It is efficient, requiring at each time level only O(N) operations where N is the number of unknowns. Moreover, it is shown to produce approximations which are of optimal global accuracy in various norms, and to possess superconvergence properties.

  1. Navier-Stokes simulation of wind-tunnel flow using LU-ADI factorization algorithm

    NASA Technical Reports Server (NTRS)

    Obayashi, Shigeru; Fujii, Kozo; Gavali, Sharad

    1988-01-01

    The three dimensional Navier-Stokes solution code using the LU-ADI factorization algorithm was employed to simulate the workshop test cases of transonic flow past a wing model in a wind tunnel and in free air. The effect of the tunnel walls is well demonstrated by the present simulations. An Amdahl 1200 supercomputer having 128 Mbytes main memory was used for these computations.

  2. Numerical Simulations of STOVL Hot Gas Ingestion in Ground Proximity Using a Multigrid Solution Procedure

    NASA Technical Reports Server (NTRS)

    Wang, Gang

    2003-01-01

    A multi grid solution procedure for the numerical simulation of turbulent flows in complex geometries has been developed. A Full Multigrid-Full Approximation Scheme (FMG-FAS) is incorporated into the continuity and momentum equations, while the scalars are decoupled from the multi grid V-cycle. A standard kappa-Epsilon turbulence model with wall functions has been used to close the governing equations. The numerical solution is accomplished by solving for the Cartesian velocity components either with a traditional grid staggering arrangement or with a multiple velocity grid staggering arrangement. The two solution methodologies are evaluated for relative computational efficiency. The solution procedure with traditional staggering arrangement is subsequently applied to calculate the flow and temperature fields around a model Short Take-off and Vertical Landing (STOVL) aircraft hovering in ground proximity.

  3. Transonic flow solutions using a composite velocity procedure for potential, Euler and RNS equations

    NASA Technical Reports Server (NTRS)

    Gordnier, R. E.; Rubin, S. G.

    1986-01-01

    Solutions for transonic viscous and inviscid flows using a composite velocity procedure are presented. The velocity components of the compressible flow equations are written in terms of a multiplicative composite consisting of a viscous or rotational velocity and an inviscid, irrotational, potential-like function. This provides for an efficient solution procedure that is locally representative of both asymptotic inviscid and boundary layer theories. A modified conservative form of the axial momentum equation that is required to obtain rotational solutions in the inviscid region is presented and a combined conservation/nonconservation form is applied for evaluation of the reduced Navier-Stokes (RNS), Euler and potential equations. A variety of results is presented and the effects of the approximations on entropy production, shock capturing, and viscous interaction are discussed.

  4. Transonic flow solutions using a composite velocity procedure for potential, Euler and RNS equations

    NASA Technical Reports Server (NTRS)

    Gordnier, R. E.; Rubin, S. G.

    1989-01-01

    Solutions for transonic viscous and inviscid flows using a composite velocity procedure are presented. The velocity components of the compressible flow equations are written in terms of a multiplicative composite consisting of a viscous or rotational velocity and an inviscid, irrotational, potential-like function. This provides for an efficient solution procedure that is locally representative of both asymptotic inviscid and boundary layer theories. A modified conservative form of the axial momentum equation that is required to obtain rotational solutions in the inviscid region is presented and a combined conservation/nonconservation form is applied for evaluation of the reduced Navier-Stokes (RNS), Euler and potential equations. A variety of results is presented and the effects of the approximations on entropy production, shock capturing, and viscous interaction are discussed.

  5. Combined LAURA-UPS solution procedure for chemically-reacting flows. M.S. Thesis

    NASA Technical Reports Server (NTRS)

    Wood, William A.

    1994-01-01

    A new procedure seeks to combine the thin-layer Navier-Stokes solver LAURA with the parabolized Navier-Stokes solver UPS for the aerothermodynamic solution of chemically-reacting air flowfields. The interface protocol is presented and the method is applied to two slender, blunted shapes. Both axisymmetric and three dimensional solutions are included with surface pressure and heat transfer comparisons between the present method and previously published results. The case of Mach 25 flow over an axisymmetric six degree sphere-cone with a noncatalytic wall is considered to 100 nose radii. A stability bound on the marching step size was observed with this case and is attributed to chemistry effects resulting from the noncatalytic wall boundary condition. A second case with Mach 28 flow over a sphere-cone-cylinder-flare configuration is computed at both two and five degree angles of attack with a fully-catalytic wall. Surface pressures are seen to be within five percent with the present method compared to the baseline LAURA solution and heat transfers are within 10 percent. The effect of grid resolution is investigated and the nonequilibrium results are compared with a perfect gas solution, showing that while the surface pressure is relatively unchanged by the inclusion of reacting chemistry the nonequilibrium heating is 25 percent higher. The procedure demonstrates significant, order of magnitude reductions in solution time and required memory for the three dimensional case over an all thin-layer Navier-Stokes solution.

  6. A solution procedure based on the Ateb function for a two-degree-of-freedom oscillator

    NASA Astrophysics Data System (ADS)

    Cveticanin, L.

    2015-06-01

    In this paper vibration of a two mass system with two degrees of freedom is considered. Two equal harmonic oscillators are coupled with a strong nonlinear viscoelastic connection. Mathematical model of the system is two coupled second-order strong nonlinear differential equations. Introducing new variables the system transforms into two uncoupled equations: one of them is linear and the other with a strong nonlinearity. In the paper a method for solving the strong nonlinear equation is developed. Based on the exact solution of a pure nonlinear differential equation, we assumed a perturbed version of the solution with time variable parameters. Due to the fact that the solution is periodical, the averaging procedure is introduced. As a special case vibrations of harmonic oscillators with fraction order nonlinear connection are considered. Depending on the order and coefficient of nonlinearities bounded and unbounded motion of masses is determined. Besides, the conditions for steady-state periodical solution are discussed. The procedure given in the paper is applied for investigation of the vibration of a vocal cord, which is modeled with two harmonic oscillators with strong nonlinear fraction order viscoelastic connection. Using the experimental data for the vocal cord the parameters for the steady-state solution which describes the flexural vibration of the vocal cord is analyzed. The influence of the order of nonlinearity on the amplitude and frequency of vibration of the vocal cord is obtained. The analytical results are close to those obtained experimentally.

  7. Parallel iterative procedures for approximate solutions of wave propagation by finite element and finite difference methods

    SciTech Connect

    Kim, S.

    1994-12-31

    Parallel iterative procedures based on domain decomposition techniques are defined and analyzed for the numerical solution of wave propagation by finite element and finite difference methods. For finite element methods, in a Lagrangian framework, an efficient way for choosing the algorithm parameter as well as the algorithm convergence are indicated. Some heuristic arguments for finding the algorithm parameter for finite difference schemes are addressed. Numerical results are presented to indicate the effectiveness of the methods.

  8. A rapid perturbation procedure for determining nonlinear flow solutions: Application to transonic turbomachinery flows

    NASA Technical Reports Server (NTRS)

    Stahara, S. S.; Elliott, J. P.; Spreiter, J. R.

    1981-01-01

    Perturbation procedures and associated computational codes for determining nonlinear flow solutions were developed to establish a method for minimizing computational requirements associated with parametric studies of transonic flows in turbomachines. The procedure that was developed and evaluated was found to be capable of determining highly accurate approximations to families of strongly nonlinear solutions which are either continuous or discontinuous, and which represent variations in some arbitrary parameter. Coordinate straining is employed to account for the movement of discontinuities and maxima of high gradient regions due to the perturbation. The development and results reported are for the single parameter perturbation problem. Flows past both isolated airfoils and compressor cascades involving a wide variety of flow and geometry parameter changes are reported. Attention is focused in particular on transonic flows which are strongly supercritical and exhibit large surface shock movement over the parametric range studied; and on subsonic flows which display large pressure variations in the stagnation and peak suction pressure regions. Comparisons with the corresponding 'exact' nonlinear solutions indicate a remarkable accuracy and range of validity of such a procedure.

  9. A GPU-accelerated semi-implicit ADI method for incompressible and compressible Navier-Stokes equations

    NASA Astrophysics Data System (ADS)

    Ha, Sanghyun; You, Donghyun

    2015-11-01

    Utility of the computational power of Graphics Processing Units (GPUs) is elaborated for solutions of both incompressible and compressible Navier-Stokes equations. A semi-implicit ADI finite-volume method for integration of the incompressible and compressible Navier-Stokes equations, which are discretized on a structured arbitrary grid, is parallelized for GPU computations using CUDA (Compute Unified Device Architecture). In the semi-implicit ADI finite-volume method, the nonlinear convection terms and the linear diffusion terms are integrated in time using a combination of an explicit scheme and an ADI scheme. Inversion of multiple tri-diagonal matrices is found to be the major challenge in GPU computations of the present method. Some of the algorithms for solving tri-diagonal matrices on GPUs are evaluated and optimized for GPU-acceleration of the present semi-implicit ADI computations of incompressible and compressible Navier-Stokes equations. Supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT and Future Planning Grant NRF-2014R1A2A1A11049599.

  10. Rocket injector anomalies study. Volume 1: Description of the mathematical model and solution procedure

    NASA Technical Reports Server (NTRS)

    Przekwas, A. J.; Singhal, A. K.; Tam, L. T.

    1984-01-01

    The capability of simulating three dimensional two phase reactive flows with combustion in the liquid fuelled rocket engines is demonstrated. This was accomplished by modifying an existing three dimensional computer program (REFLAN3D) with Eulerian Lagrangian approach to simulate two phase spray flow, evaporation and combustion. The modified code is referred as REFLAN3D-SPRAY. The mathematical formulation of the fluid flow, heat transfer, combustion and two phase flow interaction of the numerical solution procedure, boundary conditions and their treatment are described.

  11. Calculation procedures for potential and viscous flow solutions for engine inlets

    NASA Technical Reports Server (NTRS)

    Albers, J. A.; Stockman, N. O.

    1973-01-01

    The method and basic elements of computer solutions for both potential flow and viscous flow calculations for engine inlets are described. The procedure is applicable to subsonic conventional (CTOL), short-haul (STOL), and vertical takeoff (VTOL) aircraft engine nacelles operating in a compressible viscous flow. The calculated results compare well with measured surface pressure distributions for a number of model inlets. The paper discusses the uses of the program in both the design and analysis of engine inlets, with several examples given for VTOL lift fans, acoustic splitters, and for STOL engine nacelles. Several test support applications are also given.

  12. A Numerical Instability in an ADI Algorithm for Gyrokinetics

    SciTech Connect

    E.A. Belli; G.W. Hammett

    2004-12-17

    We explore the implementation of an Alternating Direction Implicit (ADI) algorithm for a gyrokinetic plasma problem and its resulting numerical stability properties. This algorithm, which uses a standard ADI scheme to divide the field solve from the particle distribution function advance, has previously been found to work well for certain plasma kinetic problems involving one spatial and two velocity dimensions, including collisions and an electric field. However, for the gyrokinetic problem we find a severe stability restriction on the time step. Furthermore, we find that this numerical instability limitation also affects some other algorithms, such as a partially implicit Adams-Bashforth algorithm, where the parallel motion operator v{sub {parallel}} {partial_derivative}/{partial_derivative}z is treated implicitly and the field terms are treated with an Adams-Bashforth explicit scheme. Fully explicit algorithms applied to all terms can be better at long wavelengths than these ADI or partially implicit algorithms.

  13. The ADIS advanced data acquisition, imaging, and storage system

    SciTech Connect

    Flaherty, J.W.

    1986-01-01

    The design and development of Automated Ultrasonic Scanning Systems (AUSS) by McDonnell Aircraft Company has provided the background for the development of the ADIS advanced data acquisition, imaging, and storage system. The ADIS provides state-of-the-art ultrasonic data processing and imaging features which can be utilized in both laboratory and production line composite evaluation applications. System features, such as, real-time imaging, instantaneous electronic rescanning, multitasking capability, histograms, and cross-sections, provide the tools necessary to inspect and evaluate composite parts quickly and consistently.

  14. High-order compact ADI method using predictor-corrector scheme for 2D complex Ginzburg-Landau equation

    NASA Astrophysics Data System (ADS)

    Shokri, Ali; Afshari, Fatemeh

    2015-12-01

    In this article, a high-order compact alternating direction implicit (HOC-ADI) finite difference scheme is applied to numerical solution of the complex Ginzburg-Landau (GL) equation in two spatial dimensions with periodical boundary conditions. The GL equation has been used as a mathematical model for various pattern formation systems in mechanics, physics, and chemistry. The proposed HOC-ADI method has fourth-order accuracy in space and second-order accuracy in time. To avoid solving the nonlinear system and to increase the accuracy and efficiency of the method, we proposed the predictor-corrector scheme. Validation of the present numerical solutions has been conducted by comparing with the exact and other methods results and evidenced a good agreement.

  15. Chitosan-based hydrogel for dye removal from aqueous solutions: Optimization of the preparation procedure

    NASA Astrophysics Data System (ADS)

    Gioiella, Lucia; Altobelli, Rosaria; de Luna, Martina Salzano; Filippone, Giovanni

    2016-05-01

    The efficacy of chitosan-based hydrogels in the removal of dyes from aqueous solutions has been investigated as a function of different parameters. Hydrogels were obtained by gelation of chitosan with a non-toxic gelling agent based on an aqueous basic solution. The preparation procedure has been optimized in terms of chitosan concentration in the starting solution, gelling agent concentration and chitosan-to-gelling agent ratio. The goal is to properly select the material- and process-related parameters in order to optimize the performances of the chitosan-based dye adsorbent. First, the influence of such factors on the gelling process has been studied from a kinetic point of view. Then, the effects on the adsorption capacity and kinetics of the chitosan hydrogels obtained in different conditions have been investigated. A common food dye (Indigo Carmine) has been used for this purpose. Noticeably, although the disk-shaped hydrogels are in the bulk form, their adsorption capacity is comparable to that reported in the literature for films and beads. In addition, the bulk samples can be easily separated from the liquid phase after the adsorption process, which is highly attractive from a practical point of view. Compression tests reveal that the samples do not breakup even after relatively large compressive strains. The obtained results suggest that the fine tuning of the process parameters allows the production of mechanical resistant and highly adsorbing chitosan-based hydrogels.

  16. Generic Procedure for Coupling the PHREEQC Geochemical Modeling Framework with Flow and Solute Transport Simulators

    NASA Astrophysics Data System (ADS)

    Wissmeier, L. C.; Barry, D. A.

    2009-12-01

    Computer simulations of water availability and quality play an important role in state-of-the-art water resources management. However, many of the most utilized software programs focus either on physical flow and transport phenomena (e.g., MODFLOW, MT3DMS, FEFLOW, HYDRUS) or on geochemical reactions (e.g., MINTEQ, PHREEQC, CHESS, ORCHESTRA). In recent years, several couplings between both genres of programs evolved in order to consider interactions between flow and biogeochemical reactivity (e.g., HP1, PHWAT). Software coupling procedures can be categorized as ‘close couplings’, where programs pass information via the memory stack at runtime, and ‘remote couplings’, where the information is exchanged at each time step via input/output files. The former generally involves modifications of software codes and therefore expert programming skills are required. We present a generic recipe for remotely coupling the PHREEQC geochemical modeling framework and flow and solute transport (FST) simulators. The iterative scheme relies on operator splitting with continuous re-initialization of PHREEQC and the FST of choice at each time step. Since PHREEQC calculates the geochemistry of aqueous solutions in contact with soil minerals, the procedure is primarily designed for couplings to FST’s for liquid phase flow in natural environments. It requires the accessibility of initial conditions and numerical parameters such as time and space discretization in the input text file for the FST and control of the FST via commands to the operating system (batch on Windows; bash/shell on Unix/Linux). The coupling procedure is based on PHREEQC’s capability to save the state of a simulation with all solid, liquid and gaseous species as a PHREEQC input file by making use of the dump file option in the TRANSPORT keyword. The output from one reaction calculation step is therefore reused as input for the following reaction step where changes in element amounts due to advection

  17. New approaches in the derivation of acceptable daily intake (ADI)

    SciTech Connect

    Dourson, M.L.

    1986-01-01

    Current methods for estimating human health risks from exposure to threshold-acting toxicants in water or food, such as those established by the U.S. EPA, the FDA, the NAS, the WHO and the FAO, consider only chronic or lifetime exposure to individual chemicals. These methods generally estimate a single, constant daily intake rate which is low enough to be considered safe or acceptable. The intake rate is termed the acceptable daily intake (ADI). Two problems with the approach have been recognized. The first problem is that the method does not readily account for the number of animals used to determine the appropriate 'no-observed-effect-level' (NOEL). The second problem with the current approach is that the slope of the dose-response curve of the critical toxic effect is generally ignored in estimating the ADI. The report illustrates both a revised approach to estimate ADIs with all toxicity data which includes methods for partial lifetime assessment, and novel methods for ADI estimation with quantal or continuous toxicity data. The latter method addresses to a degree the common problems with the current approach.

  18. Adie's Tonic Pupil in Systemic Sclerosis: A Rare Association

    PubMed Central

    Venkataraman, Anusha; Panda, Bijnya Birajita; Sirka, Chandrasekhar

    2015-01-01

    We report a rare association of Adie's tonic pupil in a patient with systemic sclerosis who was otherwise systemically stable. This paper is an effort to unravel whether the tonic pupil and systemic sclerosis are an association by chance (which may be the case) or systemic sclerosis is the source of the tonic pupil. PMID:26421204

  19. Tensile properties of ADI material in water and gaseous environments

    SciTech Connect

    Rajnovic, Dragan; Balos, Sebastian; Sidjanin, Leposava; Eric Cekic, Olivera; Grbovic Novakovic, Jasmina

    2015-03-15

    Austempered ductile iron (ADI) is an advanced type of heat treated ductile iron, having comparable mechanical properties as forged steels. However, it was found that in contact with water the mechanical properties of austempered ductile irons decrease, especially their ductility. Despite considerable scientific attention, the cause of this phenomenon remains unclear. Some authors suggested that hydrogen or small atom chemisorption causes the weakening of the surface atomic bonds. To get additional reliable data of that phenomenon, in this paper, two different types of austempered ductile irons were tensile tested in various environments, such as: argon, helium, hydrogen gas and water. It was found that only the hydrogen gas and water gave a statistically significant decrease in mechanical properties, i.e. cause embrittlement. Furthermore, the fracture surface analysis revealed that the morphology of the embrittled zone near the specimen surface shares similarities to the fatigue micro-containing striation-like lines, which indicates that the morphology of the brittle zone may be caused by cyclic local-chemisorption, micro-embrittlement and local-fracture. - Highlights: • In contact with water and other liquids the ADI suddenly exhibits embrittlement. • The embrittlement is more pronounced in water than in the gaseous hydrogen. • The hydrogen chemisorption into ADI surface causes the formation of a brittle zone. • The ADI austempered at lower temperatures (300 °C) is more resistant to embrittlement.

  20. Numerical simulation of nanopulse penetration of biological matter using the ADI-FDTD method

    NASA Astrophysics Data System (ADS)

    Zhu, Fei

    Nanopulses are ultra-wide-band (UWB) electromagnetic pulses with pulse duration of only a few nanoseconds and electric field amplitudes greater than 105 V/m. They have been widely used in the development of new technologies in the field of medicine. Therefore, the study of the nanopulse bioeffects is important to ensure the appropriate application with nanopulses in biomedical and biotechnological settings. The conventional finite-difference time-domain (FDTD) method for solving Maxwell's equations has been proven to be an effective method to solve the problems related to electromagnetism. However, its application is restricted by the Courant, Friedrichs, and Lewy (CFL) stability condition that confines the time increment and mesh size in the computation in order to prevent the solution from being divergent. This dissertation develops a new finite difference scheme coupled with the Cole-Cole expression for dielectric coefficients of biological tissues to simulate the electromagnetic fields inside biological tissues when exposed to nanopulses. The scheme is formulated based on the Yee's cell and alternating direction implicit (ADI) technique. The basic idea behind the ADI technique is to break up every time step into two half-time steps. At the first half-step, the finite difference operator on the right-hand side of the Maxwell's equation is implicit only along one coordinate axis direction. At the second half-step, the finite difference operator on the right-hand side of the Maxwell's equation is implicit only along the other coordinate axis direction. As such, only tridiagonal linear systems are solved. In this numerical method, the Cole-Cole expression is approximated by a second-order Taylor series based on the z-transform method. In addition, the perfectly matched layer is employed for the boundary condition, and the total/scattered field technique is employed to generate the plane wave in order to prevent the wave reflection. The scheme is tested by numerical

  1. New Techniques for High-contrast Imaging with ADI: The ACORNS-ADI SEEDS Data Reduction Pipeline

    NASA Astrophysics Data System (ADS)

    Brandt, Timothy D.; McElwain, Michael W.; Turner, Edwin L.; Abe, L.; Brandner, W.; Carson, J.; Egner, S.; Feldt, M.; Golota, T.; Goto, M.; Grady, C. A.; Guyon, O.; Hashimoto, J.; Hayano, Y.; Hayashi, M.; Hayashi, S.; Henning, T.; Hodapp, K. W.; Ishii, M.; Iye, M.; Janson, M.; Kandori, R.; Knapp, G. R.; Kudo, T.; Kusakabe, N.; Kuzuhara, M.; Kwon, J.; Matsuo, T.; Miyama, S.; Morino, J.-I.; Moro-Martín, A.; Nishimura, T.; Pyo, T.-S.; Serabyn, E.; Suto, H.; Suzuki, R.; Takami, M.; Takato, N.; Terada, H.; Thalmann, C.; Tomono, D.; Watanabe, M.; Wisniewski, J. P.; Yamada, T.; Takami, H.; Usuda, T.; Tamura, M.

    2013-02-01

    We describe Algorithms for Calibration, Optimized Registration, and Nulling the Star in Angular Differential Imaging (ACORNS-ADI), a new, parallelized software package to reduce high-contrast imaging data, and its application to data from the SEEDS survey. We implement several new algorithms, including a method to register saturated images, a trimmed mean for combining an image sequence that reduces noise by up to ~20%, and a robust and computationally fast method to compute the sensitivity of a high-contrast observation everywhere on the field of view without introducing artificial sources. We also include a description of image processing steps to remove electronic artifacts specific to Hawaii2-RG detectors like the one used for SEEDS, and a detailed analysis of the Locally Optimized Combination of Images (LOCI) algorithm commonly used to reduce high-contrast imaging data. ACORNS-ADI is written in python. It is efficient and open-source, and includes several optional features which may improve performance on data from other instruments. ACORNS-ADI requires minimal modification to reduce data from instruments other than HiCIAO. It is freely available for download at www.github.com/t-brandt/acorns-adi under a Berkeley Software Distribution (BSD) license. Based on data collected at Subaru Telescope, which is operated by the National Astronomical Observatory of Japan.

  2. New Techniques for High-Contrast Imaging with ADI: The ACORNS-ADI SEEDS Data Reduction Pipeline

    NASA Technical Reports Server (NTRS)

    Brandt, Timothy D.; McElwain, Michael W.; Turner, Edwin L.; Abe, L.; Brandner, W.; Carson, J.; Egner, S.; Feldt, M.; Golota, T.; Grady, C. A.; Guyon, O.; Hashimoto, J.; Hayano, Y.; Hayashi, M.; Hayashi, S.; Henning, T.; Hodapp, K. W.; Ishil, M.; Lye, M.; Janson, M.; Kandori, R.; Knapp, G. R.; Kudo, T.; Kusakabe, N.; Kuzuhara, M.

    2012-01-01

    We describe Algorithms for Calibration, Optimized Registration, and Nulling the Star in Angular Differential Imaging (ACORNS-ADI), a new, parallelized software package to reduce high-contrast imaging data, and its application to data from the Strategic Exploration of Exoplanets and Disks (SEEDS) survey. We implement seyeral new algorithms, includbg a method to centroid saturated images, a trimmed mean for combining an image sequence that reduces noise by up to approx 20%, and a robust and computationally fast method to compute the sensitivitv of a high-contrast obsen-ation everywhere on the field-of-view without introducing artificial sources. We also include a description of image processing steps to remove electronic artifacts specific to Hawaii2-RG detectors like the one used for SEEDS, and a detailed analysis of the Locally Optimized Combination of Images (LOCI) algorithm commonly used to reduce high-contrast imaging data. ACORNS-ADI is efficient and open-source, and includes several optional features which may improve performance on data from other instruments. ACORNS-ADI is freely available for download at www.github.com/t-brandt/acorns_-adi under a BSD license

  3. NEW TECHNIQUES FOR HIGH-CONTRAST IMAGING WITH ADI: THE ACORNS-ADI SEEDS DATA REDUCTION PIPELINE

    SciTech Connect

    Brandt, Timothy D.; Turner, Edwin L.; McElwain, Michael W.; Grady, C. A.; Abe, L.; Brandner, W.; Feldt, M.; Henning, T.; Carson, J.; Egner, S.; Golota, T.; Guyon, O.; Hayano, Y.; Hayashi, S.; Ishii, M.; Goto, M.; Hashimoto, J.; Hayashi, M.; Iye, M.; Hodapp, K. W.; and others

    2013-02-20

    We describe Algorithms for Calibration, Optimized Registration, and Nulling the Star in Angular Differential Imaging (ACORNS-ADI), a new, parallelized software package to reduce high-contrast imaging data, and its application to data from the SEEDS survey. We implement several new algorithms, including a method to register saturated images, a trimmed mean for combining an image sequence that reduces noise by up to {approx}20%, and a robust and computationally fast method to compute the sensitivity of a high-contrast observation everywhere on the field of view without introducing artificial sources. We also include a description of image processing steps to remove electronic artifacts specific to Hawaii2-RG detectors like the one used for SEEDS, and a detailed analysis of the Locally Optimized Combination of Images (LOCI) algorithm commonly used to reduce high-contrast imaging data. ACORNS-ADI is written in python. It is efficient and open-source, and includes several optional features which may improve performance on data from other instruments. ACORNS-ADI requires minimal modification to reduce data from instruments other than HiCIAO. It is freely available for download at www.github.com/t-brandt/acorns-adi under a Berkeley Software Distribution (BSD) license.

  4. Evaluation of solution procedures for material and/or geometrically nonlinear structural analysis by the direct stiffness method.

    NASA Technical Reports Server (NTRS)

    Stricklin, J. A.; Haisler, W. E.; Von Riesemann, W. A.

    1972-01-01

    This paper presents an assessment of the solution procedures available for the analysis of inelastic and/or large deflection structural behavior. A literature survey is given which summarized the contribution of other researchers in the analysis of structural problems exhibiting material nonlinearities and combined geometric-material nonlinearities. Attention is focused at evaluating the available computation and solution techniques. Each of the solution techniques is developed from a common equation of equilibrium in terms of pseudo forces. The solution procedures are applied to circular plates and shells of revolution in an attempt to compare and evaluate each with respect to computational accuracy, economy, and efficiency. Based on the numerical studies, observations and comments are made with regard to the accuracy and economy of each solution technique.

  5. 3-D ADI-FDTD modeling of GPR backscatter from complex targets for the training of artificial neural networks

    NASA Astrophysics Data System (ADS)

    Sassen, D. S.; Everett, M. E.

    2007-12-01

    Artificial neural networks can provide approximate solutions to ground-penetrating radar (GPR) problems in cases where real time performance is needed. Examples include discrimination of landmines or UXO's, and in circumstances that require a high number of successive forward problems, for example inversion or imaging. The training of neural networks to work within even a limited range of targets and electromagnetic properties requires a large set of successive examples generated from numerical methods such as finite difference time domain (FDTD). The traditional FDTD technique suffers from numerical dispersion unless time steps are kept below the Courant stability limit. The accurate modeling of electromagnetic scattering by complex targets require a refined grid, subgrids, or conformal grids that can significantly increase computation time, making neural network training inefficient. A relatively recent FDTD technique, ADI-FDTD, uses implicit equations that help to cancel numerical dispersion and allow for unconditionally stable modeling of EM propagation and therefore is not bound by the Courant stability limit. The technique is especially efficient for the accurate modeling of complex targets. Our ADI-FDTD code includes the ability to refine the model grid and to implement a conformal gridding to improve model accuracy without effecting the overall computation time. We will explore the tradeoff in computation time and accuracy in modeling the GPR backscatter of various targets using both the ADI-FDTD technique and the traditional FDTD technique for the purpose of neural network training.

  6. Constrained Self-adaptive Solutions Procedures for Structure Subject to High Temperature Elastic-plastic Creep Effects

    NASA Technical Reports Server (NTRS)

    Padovan, J.; Tovichakchaikul, S.

    1983-01-01

    This paper will develop a new solution strategy which can handle elastic-plastic-creep problems in an inherently stable manner. This is achieved by introducing a new constrained time stepping algorithm which will enable the solution of creep initiated pre/postbuckling behavior where indefinite tangent stiffnesses are encountered. Due to the generality of the scheme, both monotone and cyclic loading histories can be handled. The presentation will give a thorough overview of current solution schemes and their short comings, the development of constrained time stepping algorithms as well as illustrate the results of several numerical experiments which benchmark the new procedure.

  7. Study on overlay AEI-ADI shift on contact layer of advanced technology node

    NASA Astrophysics Data System (ADS)

    Deng, Guogui; Hao, Jingan; Xiao, Lihong; Xing, Bin; Jiang, Yuntao; He, Kaiting; Zhang, Qiang; He, Weiming; Liu, Chang; Lin, Yi-Shih; Wu, Qiang; Shi, Xuelong

    2016-03-01

    In this paper, we present a study on the overlay (OVL) shift issue in contact (CT) layer aligned to poly-silicon (short as poly) layer (prior layer) in an advanced technology node [1, 2]. We have showed the wafer level OVL AEI-ADI shift (AEI: After Etch Inspection; ADI: After Developing Inspection; AEI-ADI: AEI minus ADI). Within the shot level map, there exists a center-edge difference. The OVL focus subtraction map can well match the OVL AEI-ADI shift map. Investigation into this interesting correlation finally leads to the conclusion of PR tilt. The film stress of the thick hard mask is responsible for the PR tilt. The method of OVL focus subtraction can therefore be a powerful and convenient tool to represent the OVL mark profile. It is also important to take into account the film deposition when investigating OVL AEI-ADI shift.

  8. Test procedure for anion exchange testing with Argonne 10-L solutions

    SciTech Connect

    Compton, J.A.

    1995-05-17

    Four anion exchange resins will be tested to confirm that they will sorb and release plutonium from/to the appropriate solutions in the presence of other cations. Certain cations need to be removed from the test solutions to minimize adverse behavior in other processing equipment. The ion exchange resins will be tested using old laboratory solutions from Argonne National Laboratory; results will be compared to results from other similar processes for application to all plutonium solutions stored in the Plutonium Finishing Plant.

  9. Clinical Validity of the ADI-R in a US-Based Latino Population

    ERIC Educational Resources Information Center

    Vanegas, Sandra B.; Magaña, Sandra; Morales, Miguel; McNamara, Ellyn

    2016-01-01

    The Autism Diagnostic Interview-Revised (ADI-R) has been validated as a tool to aid in the diagnosis of Autism; however, given the growing diversity in the United States, the ADI-R must be validated for different languages and cultures. This study evaluates the validity of the ADI-R in a US-based Latino, Spanish-speaking population of 50 children…

  10. Multilevel adaptive solution procedure for material nonlinear problems in visual programming environment

    SciTech Connect

    Kim, D.; Ghanem, R.

    1994-12-31

    Multigrid solution technique to solve a material nonlinear problem in a visual programming environment using the finite element method is discussed. The nonlinear equation of equilibrium is linearized to incremental form using Newton-Rapson technique, then multigrid solution technique is used to solve linear equations at each Newton-Rapson step. In the process, adaptive mesh refinement, which is based on the bisection of a pair of triangles, is used to form grid hierarchy for multigrid iteration. The solution process is implemented in a visual programming environment with distributed computing capability, which enables more intuitive understanding of solution process, and more effective use of resources.

  11. Selective Intracellular Delivery of Recombinant Arginine Deiminase (ADI) Using pH-Sensitive Cell Penetrating Peptides To Overcome ADI Resistance in Hypoxic Breast Cancer Cells.

    PubMed

    Yeh, Tzyy-Harn; Chen, Yun-Ru; Chen, Szu-Ying; Shen, Wei-Chiang; Ann, David K; Zaro, Jennica L; Shen, Li-Jiuan

    2016-01-01

    Arginine depletion strategies, such as pegylated recombinant arginine deiminase (ADI-PEG20), offer a promising anticancer treatment. Many tumor cells have suppressed expression of a key enzyme, argininosuccinate synthetase 1 (ASS1), which converts citrulline to arginine. These tumor cells become arginine auxotrophic, as they can no longer synthesize endogenous arginine intracellularly from citrulline, and are therefore sensitive to arginine depletion therapy. However, since ADI-PEG20 only depletes extracellular arginine due to low internalization, ASS1-expressing cells are not susceptible to treatment since they can synthesize arginine intracellularly. Recent studies have found that several factors influence ASS1 expression. In this study, we evaluated the effect of hypoxia, frequently encountered in many solid tumors, on ASS1 expression and its relationship to ADI-resistance in human MDA-MB-231 breast cancer cells. It was found that MDA-MB-231 cells developed ADI resistance in hypoxic conditions with increased ASS1 expression. To restore ADI sensitivity as well as achieve tumor-selective delivery under hypoxia, we constructed a pH-sensitive cell penetrating peptide (CPP)-based delivery system to carry ADI inside cells to deplete both intra- and extracellular arginine. The delivery system was designed to activate the CPP-mediated internalization only at the mildly acidic pH (6.5-7) associated with the microenvironment of hypoxic tumors, thus achieving better selectivity toward tumor cells. The pH sensitivity of the CPP HBHAc was controlled by recombinant fusion to a histidine-glutamine (HE) oligopeptide, generating HBHAc-HE-ADI. The tumor distribution of HBHAc-HE-ADI was comparable to ADI-PEG20 in a mouse xenograft model of human breast cancer cells in vivo. In addition, HBHAc-HE-ADI showed increased in vitro cellular uptake in cells incubated in a mildly acidic pH (hypoxic conditions) compared to normal pH (normoxic conditions), which correlated with p

  12. Effect of austempering temperature on cavitation behaviour of unalloyed ADI material

    SciTech Connect

    Dojcinovic, Marina; Eric, Olivera; Rajnovic, Dragan; Sidjanin, Leposava; Balos, Sebastian

    2013-08-15

    This paper provides an in-depth study and description of cavitation damage and microstructural changes in two types of unalloyed austempered ductile iron (ADI). ADI materials used were austempered at 300 and 400 °C having ausferrite microstructure with 16 and 31.4% of retained austenite, respectively. Metallographic examination was carried out to study the morphology of their cavitation-damaged surfaces. Cavitation damage was initiated at graphite nodules as well as in the interface between a graphite nodule and an ausferrite matrix. Furthermore, microcracking and ferrite/retained austenite morphology were proved to be of great importance for cavitation resistance. Mass loss rate revealed that ADI austempered at 400 °C has a higher cavitation resistance in water than ADI austempered at 300 °C. A higher amount of retained austenite in ADI austempered at 400 °C played an important role in increasing cavitation resistance. The good cavitation behaviour of ADI austempered at 400 °C was due to the matrix hardening by stress assisted phase transformation of retained austenite into martensite (SATRAM) phenomenon, as shown by X-ray diffraction analysis. - Highlights: • Cavitation rate of two ADI materials was tested. • ADI material with a lower hardness has had a lower cavitation rate. • The main reason is microstructural transformations during cavitation. • SATRAM phenomenon increases cavitation resistance.

  13. Brief Report: Excluding the ADI-R Behavioral Domain Improves Diagnostic Agreement in Toddlers

    ERIC Educational Resources Information Center

    Wiggins, Lisa D.; Robins, Diana L.

    2008-01-01

    Past research shows poor agreement between the Autism Diagnostic Interview-Revised (ADI-R) and other diagnostic measures in toddlers. Our goal was to examine whether exclusion of the ADI-R behavioral domain results in improved diagnostic agreement. Toddlers aged 16-37 months (M = 26 months) received an evaluation because they failed the Modified…

  14. Optimization in the utility maximization framework for conservation planning: a comparison of solution procedures in a study of multifunctional agriculture

    USGS Publications Warehouse

    Kreitler, Jason R.; Stoms, David M.; Davis, Frank W.

    2014-01-01

    Quantitative methods of spatial conservation prioritization have traditionally been applied to issues in conservation biology and reserve design, though their use in other types of natural resource management is growing. The utility maximization problem is one form of a covering problem where multiple criteria can represent the expected social benefits of conservation action. This approach allows flexibility with a problem formulation that is more general than typical reserve design problems, though the solution methods are very similar. However, few studies have addressed optimization in utility maximization problems for conservation planning, and the effect of solution procedure is largely unquantified. Therefore, this study mapped five criteria describing elements of multifunctional agriculture to determine a hypothetical conservation resource allocation plan for agricultural land conservation in the Central Valley of CA, USA. We compared solution procedures within the utility maximization framework to determine the difference between an open source integer programming approach and a greedy heuristic, and find gains from optimization of up to 12%. We also model land availability for conservation action as a stochastic process and determine the decline in total utility compared to the globally optimal set using both solution algorithms. Our results are comparable to other studies illustrating the benefits of optimization for different conservation planning problems, and highlight the importance of maximizing the effectiveness of limited funding for conservation and natural resource management.

  15. Optimization in the utility maximization framework for conservation planning: a comparison of solution procedures in a study of multifunctional agriculture

    PubMed Central

    Stoms, David M.; Davis, Frank W.

    2014-01-01

    Quantitative methods of spatial conservation prioritization have traditionally been applied to issues in conservation biology and reserve design, though their use in other types of natural resource management is growing. The utility maximization problem is one form of a covering problem where multiple criteria can represent the expected social benefits of conservation action. This approach allows flexibility with a problem formulation that is more general than typical reserve design problems, though the solution methods are very similar. However, few studies have addressed optimization in utility maximization problems for conservation planning, and the effect of solution procedure is largely unquantified. Therefore, this study mapped five criteria describing elements of multifunctional agriculture to determine a hypothetical conservation resource allocation plan for agricultural land conservation in the Central Valley of CA, USA. We compared solution procedures within the utility maximization framework to determine the difference between an open source integer programming approach and a greedy heuristic, and find gains from optimization of up to 12%. We also model land availability for conservation action as a stochastic process and determine the decline in total utility compared to the globally optimal set using both solution algorithms. Our results are comparable to other studies illustrating the benefits of optimization for different conservation planning problems, and highlight the importance of maximizing the effectiveness of limited funding for conservation and natural resource management. PMID:25538868

  16. Analytical solutions and numerical procedures for minimum-weight Michell structures

    NASA Astrophysics Data System (ADS)

    Dewhurst, Peter

    2001-03-01

    A power-series method developed for plane-strain slip-line field theory is applied to the construction of minimum-weight Michell frameworks. The relationship between the space and force diagrams is defined as a basis for weight calculations. Analytical solutions obtained by the method are shown to agree with known solutions that were obtained through virtual displacement calculations. Framework boundary conditions are investigated, and matrix operators used in slip-line field theory are shown to apply to the force-free straight framework boundary-value problem. The matrix operator method is used to illustrate the transition from circular arc-based to cycloid-based Michell solutions. Finally, an example is given in the use of the method for evaluation of support boundary conditions.

  17. A coupled multi-block solution procedure for spray combustion in complex geometries

    NASA Technical Reports Server (NTRS)

    Chen, Kuo-Huey; Shuen, Jian-Shun

    1993-01-01

    Turbulent spray-combusting flow in complex geometries is presently treated by a coupled implicit procedure that employs finite-rate chemistry and real gas properties for combustion, as well as the stochastic separated model for spray and a multiblock treatment for complex geometries. Illustrative numerical tests conducted encompass a steady-state nonreacting backward-facing step flow, a premixed single-phase combustion flow, and spray combustion flow in a gas turbine combustor.

  18. A Procedure to Construct Exact Solutions of Nonlinear Fractional Differential Equations

    PubMed Central

    Güner, Özkan; Cevikel, Adem C.

    2014-01-01

    We use the fractional transformation to convert the nonlinear partial fractional differential equations with the nonlinear ordinary differential equations. The Exp-function method is extended to solve fractional partial differential equations in the sense of the modified Riemann-Liouville derivative. We apply the Exp-function method to the time fractional Sharma-Tasso-Olver equation, the space fractional Burgers equation, and the time fractional fmKdV equation. As a result, we obtain some new exact solutions. PMID:24737972

  19. A Simple Procedure for Constructing 5'-Amino-Terminated Oligodeoxynucleotides in Aqueous Solution

    NASA Technical Reports Server (NTRS)

    Bruick, Richard K.; Koppitz, Marcus; Joyce, Gerald F.; Orgel, Leslie E.

    1997-01-01

    A rapid method for the synthesis of oligodeoxynucleotides (ODNs) terminated by 5'-amino-5'-deoxythymidine is described. A 3'-phosphorylated ODN (the donor) is incubated in aqueous solution with 5'-amino- 5'-deoxythymidine in the presence of N-(3-dimethylaminopropyl)-)N'-ethylcarbodiimide hydrochloride (EDC), extending the donor by one residue via a phosphoramidate bond. Template- directed ligation of the extended donor and an acceptor ODN, followed by acid hydrolysis, yields the acceptor ODN extended by a single 5'-amino-5'-deoxythymidine residue at its 5'terminus.

  20. CTEPP STANDARD OPERATING PROCEDURE FOR PREPARATION OF SURROGATE RECOVERY STANDARD AND INTERNAL STANDARD SOLUTIONS FOR NEUTRAL TARGET ANALYTES (SOP-5.25)

    EPA Science Inventory

    This standard operating procedure describes the method used for preparing internal standard, surrogate recovery standard and calibration standard solutions for neutral analytes used for gas chromatography/mass spectrometry analysis.

  1. Gradient-Based Aerodynamic Shape Optimization Using ADI Method for Large-Scale Problems

    NASA Technical Reports Server (NTRS)

    Pandya, Mohagna J.; Baysal, Oktay

    1997-01-01

    A gradient-based shape optimization methodology, that is intended for practical three-dimensional aerodynamic applications, has been developed. It is based on the quasi-analytical sensitivities. The flow analysis is rendered by a fully implicit, finite volume formulation of the Euler equations.The aerodynamic sensitivity equation is solved using the alternating-direction-implicit (ADI) algorithm for memory efficiency. A flexible wing geometry model, that is based on surface parameterization and platform schedules, is utilized. The present methodology and its components have been tested via several comparisons. Initially, the flow analysis for for a wing is compared with those obtained using an unfactored, preconditioned conjugate gradient approach (PCG), and an extensively validated CFD code. Then, the sensitivities computed with the present method have been compared with those obtained using the finite-difference and the PCG approaches. Effects of grid refinement and convergence tolerance on the analysis and shape optimization have been explored. Finally the new procedure has been demonstrated in the design of a cranked arrow wing at Mach 2.4. Despite the expected increase in the computational time, the results indicate that shape optimization, which require large numbers of grid points can be resolved with a gradient-based approach.

  2. Study on ADI CD bias correlating ABC function

    NASA Astrophysics Data System (ADS)

    Deng, Guogui; Hao, Jingan; Xing, Bin; Jiang, Yuntao; Li, Gaorong; Zhang, Qiang; Yue, Liwan; Zu, Yanlei; Hu, Huayong; Liu, Chang; Shen, Manhua; Zhang, Shijian; He, Weiming; Zhang, Nannan; Lin, Yi-Shih; Wu, Qiang; Shi, Xuelong

    2015-03-01

    As the technology node of semiconductor industry is being driven into more advanced 28 nm and beyond, the critical dimension (CD) error budget at after-development inspection (ADI) stage and its control are more and more important and difficult (1-4). 1 nm or even 0.5 nm CD difference is critical for process control. 0.5~1 nm drift of poly linewidth will result in a detectable off-target drift of device performance. The 0.5~1 nm CD drift of hole or metal linewidth on the backend interconnecting layers can potentially contribute to the bridging of metal patterns to vias, and thereby impact yield. In this paper, we studied one function in the scanning electron microscope (SEM) measurement, i.e. the adjustment of brightness and contrast (ABC). We revealed how the step of addressing focus and even the choice of addressing pattern may bring in a systematic error into the CD measurement. This provides a unique insight in the CD measurement and the measurement consistency of through-pitch (TP) patterns and functional patterns.

  3. Solution of the robot forward dynamics problem by using a recursive procedure based on the general system logical theory

    SciTech Connect

    Tzvetkova, G.V.; Resconi, G.

    1999-10-01

    The paper deals with the forward dynamics problem in robotics. The solution of the problem is found on the basis of a new theory, called general system logical theory. It uses operators and transformation of operators extensively to study objects and their relations in the real world. The basis notions and operator equations are given. The forward dynamics problem is presented as a diagram, called elementary logical system. The diagram unities a set of variables, a set of operators, and a set of relations between the operators. A generic form of a recursive process using the operators and the Lie product is described. The convergence of the process is discussed. Original operator procedures dedicated to the links of the robot are proposed. The wanted solution is found at the limit of the recursive process. An example is given, as well. The result obtained illustrates the ability of the theory to study robotics problems. The forward dynamics problem is solved in a new way and without inversion of the mass matrix of the robot.

  4. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, REMOVAL OF ARSENIC IN DRINKING WATER: ADI INTERNATIONAL INC. ADI PILOT TEST UNIT NO. 2002-09 WITH MEDIA G2®; PHASE II

    EPA Science Inventory

    Verification testing of the ADI International Inc. Unit No. 2002-09 with MEDIA G2® arsenic adsorption media filter system was conducted at the Hilltown Township Water and Sewer Authority (HTWSA) Well Station No. 1 in Sellersville, Pennsylvania from October 8, 2003 through May 28,...

  5. Implementation of ADI: Schemes on MIMD parallel computers

    NASA Technical Reports Server (NTRS)

    Vanderwijngaart, Rob F.

    1993-01-01

    In order to simulate the effects of the impingement of hot exhaust jets of High Performance Aircraft on landing surfaces a multi-disciplinary computation coupling flow dynamics to heat conduction in the runway needs to be carried out. Such simulations, which are essentially unsteady, require very large computational power in order to be completed within a reasonable time frame of the order of an hour. Such power can be furnished by the latest generation of massively parallel computers. These remove the bottleneck of ever more congested data paths to one or a few highly specialized central processing units (CPU's) by having many off-the-shelf CPU's work independently on their own data, and exchange information only when needed. During the past year the first phase of this project was completed, in which the optimal strategy for mapping an ADI-algorithm for the three dimensional unsteady heat equation to a MIMD parallel computer was identified. This was done by implementing and comparing three different domain decomposition techniques that define the tasks for the CPU's in the parallel machine. These implementations were done for a Cartesian grid and Dirichlet boundary conditions. The most promising technique was then used to implement the heat equation solver on a general curvilinear grid with a suite of nontrivial boundary conditions. Finally, this technique was also used to implement the Scalar Penta-diagonal (SP) benchmark, which was taken from the NAS Parallel Benchmarks report. All implementations were done in the programming language C on the Intel iPSC/860 computer.

  6. Improving the convergence rate to steady state of parabolic ADI methods. [Alternating Direction Implicit

    NASA Technical Reports Server (NTRS)

    Abarbanel, Saul S.; Dwoyer, Douglas L.; Gottlieb, David

    1986-01-01

    The present, residuals' L(2)-norms analysis of the rate of convergence to steady state for parabolic ADI solvers allows the prediction of the number of iterations required for convergence, as a function of the Courant number alpha. A modification of current ADI codes is presented which significantly improves the convergence rate and is insensitive to the Courant number over a large range of alpha. This corrected algorithm is tested for the cases of Dirichlet problems for uniform grids of many mesh sizes, mixed Dirichlet-Neumann problems, and problems defined on stretched grids and/or problems with variable coefficients.

  7. Six-color procedure for the parallel solution of elliptic systems using the finite quadtree structures. Rept. for Mar-Nov 90

    SciTech Connect

    Benantar, M.; Flaherty, J.E.

    1990-01-01

    We consider the parallel assembly and solution on shared-memory computers of linear algebraic systems arising from the finite element discretization of two-dimensional linear self-adjoint elliptic problems. Stiffness matrix assembly and conjugate gradient solution of the linear system using element-by-element and symmetric successive over-relaxation preconditioners are processed in parallel with computations scheduled on noncontiguous regions in order to minimize process synchronization. An underlying quadtree structure, used for automatic mesh generation and solution-based mesh refinement, is separated into disjoint regions called quadrants using six-color procedure having linear time complexity.

  8. Classifying Autism Spectrum Disorders by ADI-R: Subtypes or Severity Gradient?

    ERIC Educational Resources Information Center

    Cholemkery, Hannah; Medda, Juliane; Lempp, Thomas; Freitag, Christine M.

    2016-01-01

    To reduce phenotypic heterogeneity of Autism spectrum disorders (ASD) and add to the current diagnostic discussion this study aimed at identifying clinically meaningful ASD subgroups. Cluster analyses were used to describe empirically derived groups based on the Autism Diagnostic Interview-revised (ADI-R) in a large sample of n = 463 individuals…

  9. A full automatic device for sampling small solution volumes in photometric titration procedure based on multicommuted flow system.

    PubMed

    Borges, Sivanildo S; Vieira, Gláucia P; Reis, Boaventura F

    2007-01-01

    In this work, an automatic device to deliver titrant solution into a titration chamber with the ability to determine the dispensed volume of solution, with good precision independent of both elapsed time and flow rate, is proposed. A glass tube maintained at the vertical position was employed as a container for the titrant solution. Electronic devices were coupled to the glass tube in order to control its filling with titrant solution, as well as the stepwise solution delivering into the titration chamber. The detection of the titration end point was performed employing a photometer designed using a green LED (lambda=545 nm) and a phototransistor. The titration flow system comprised three-way solenoid valves, which were assembled to allow that the steps comprising the solution container loading and the titration run were carried out automatically. The device for the solution volume determination was designed employing an infrared LED (lambda=930 nm) and a photodiode. When solution volume delivered from proposed device was within the range of 5 to 105 mul, a linear relationship (R = 0.999) between the delivered volumes and the generated potential difference was achieved. The usefulness of the proposed device was proved performing photometric titration of hydrochloric acid solution with a standardized sodium hydroxide solution and using phenolphthalein as an external indicator. The achieved results presented relative standard deviation of 1.5%. PMID:18317510

  10. A Full Automatic Device for Sampling Small Solution Volumes in Photometric Titration Procedure Based on Multicommuted Flow System

    PubMed Central

    Borges, Sivanildo S.; Vieira, Gláucia P.; Reis, Boaventura F.

    2007-01-01

    In this work, an automatic device to deliver titrant solution into a titration chamber with the ability to determine the dispensed volume of solution, with good precision independent of both elapsed time and flow rate, is proposed. A glass tube maintained at the vertical position was employed as a container for the titrant solution. Electronic devices were coupled to the glass tube in order to control its filling with titrant solution, as well as the stepwise solution delivering into the titration chamber. The detection of the titration end point was performed employing a photometer designed using a green LED (λ=545 nm) and a phototransistor. The titration flow system comprised three-way solenoid valves, which were assembled to allow that the steps comprising the solution container loading and the titration run were carried out automatically. The device for the solution volume determination was designed employing an infrared LED (λ=930 nm) and a photodiode. When solution volume delivered from proposed device was within the range of 5 to 105 μl, a linear relationship (R = 0.999) between the delivered volumes and the generated potential difference was achieved. The usefulness of the proposed device was proved performing photometric titration of hydrochloric acid solution with a standardized sodium hydroxide solution and using phenolphthalein as an external indicator. The achieved results presented relative standard deviation of 1.5%. PMID:18317510

  11. Process optimization for optical CD correlation improvement of ADI and AEI 3D structure by using iODP

    NASA Astrophysics Data System (ADS)

    Lee, Anice; Lin, Chung-Yi; Chen, F. Y.; Chang, Wen-Hao; Hsu, Sean; Li, Allen; Luo, Ying; Wen, Youxian

    2009-03-01

    To fully characterize the lithography process, it is critical to have accurate CD and profile of photo resist structure at ADI stage. Traditionally, CDSEM can only provide limited profile information, and is extremely challenged to be integrated for real-time in line wafer level process control because of throughput issue. Over the past few years, optical digital profilometry (ODP(R)) developed by Timbre Technologies, Inc., has been adopted for real-time process control in Litho for optical CD and shape monitoring. In this paper, the integrated ODP(R) reflectometer is applied to study process signatures of 3D complicated ADI and AEI structures of a 70nm DRAM process. The DT structures from the 70nm node process studied in this paper, are elliptical photo resist via developed over a thin film stack at ADI, and via etched deeply through the thick (over 5um) dielectric film at AEI. At ADI, the ODP(R) library is qualified by careful cross check with CDSEM data. CD results from iODP(R) show very good correlation to that from CDSEM. The iODP® measurement for a FEM wafer shows smoother and cleaner Bossung curves than the CDSEM does. At AEI, the library is then qualified for top CD measurement in comparison to CDSEM, and also to results at ADI. With implementing iODP(R) measurements into both ADI and AEI structures, their signature patterns from ADI to AEI for 70nm DT process can be matched successfully. Such a signature pattern match indicates the strong correlation between ADI and AEI processes and can be fully made use of for APC. It is a significant step toward IM APC control considering ADI and AEI process steps together.

  12. Function Allocation in Complex Socio-Technical Systems: Procedure usage in nuclear power and the Context Analysis Method for Identifying Design Solutions (CAMIDS) Model

    NASA Astrophysics Data System (ADS)

    Schmitt, Kara Anne

    This research aims to prove that strict adherence to procedures and rigid compliance to process in the US Nuclear Industry may not prevent incidents or increase safety. According to the Institute of Nuclear Power Operations, the nuclear power industry has seen a recent rise in events, and this research claims that a contributing factor to this rise is organizational, cultural, and based on peoples overreliance on procedures and policy. Understanding the proper balance of function allocation, automation and human decision-making is imperative to creating a nuclear power plant that is safe, efficient, and reliable. This research claims that new generations of operators are less engaged and thinking because they have been instructed to follow procedures to a fault. According to operators, they were once to know the plant and its interrelations, but organizationally more importance is now put on following procedure and policy. Literature reviews were performed, experts were questioned, and a model for context analysis was developed. The Context Analysis Method for Identifying Design Solutions (CAMIDS) Model was created, verified and validated through both peer review and application in real world scenarios in active nuclear power plant simulators. These experiments supported the claim that strict adherence and rigid compliance to procedures may not increase safety by studying the industry's propensity for following incorrect procedures, and when it directly affects the outcome of safety or security of the plant. The findings of this research indicate that the younger generations of operators rely highly on procedures, and the organizational pressures of required compliance to procedures may lead to incidents within the plant because operators feel pressured into following the rules and policy above performing the correct actions in a timely manner. The findings support computer based procedures, efficient alarm systems, and skill of the craft matrices. The solution to

  13. Demonstration and partial characterization of 22-nm HBsAg and Dane particles of subtype HBsAg/ady.

    PubMed

    Hess, G; Shih, J W; Arnold, W; Gerin, J L; zum Büschenfelde, K H

    1979-09-01

    The present paper describes the demonstration of d, y, w, and r HBsAg determinants in one serum. It was shown that there are two populations of HBsAg particles: HBsAg/ad and HBsAg/ady. All complete Dane particles were of subtype HBsAg/ady. Further characterization of HBsAg/ady particles did not reveal morphologic differences when they were compared with HBsAg/ad and HBsAg/ay particles. An HBsAg/ady phenotype may be the result of a double infection with hepatitis B viruses or exchanges of DNA sequences that determine HBsAg/ay and HBsAg/ad to form a new genotype. PMID:89163

  14. Anti-friction Coating for Drilling of Green Austempered Ductile Iron (ADI) grade

    NASA Astrophysics Data System (ADS)

    Meena, A.; El Mansori, M.; Ghidossi, P.; Mkaddem, A.

    2011-05-01

    In this paper the anti-friction performance of two types of coating, post-coated coating and PVD-TiAlN coating were investigated when drilling green austempered ductile iron (ADI) grade. The green ADI grade is produced by a new processing technology known as continuous casting-heat treatment process. The effect of coatings on tool wear and surface finish of the holes when drilling using coolant were reported. Results showed that the tool with post-coated coating has higher anti-friction properties as compared to PVD-TiAlN coating in terms of tool wear and surface roughness. Results also showed that there is a formation of preventive aluminum oxide layer during machining for both types of coating.

  15. Superior austempered ductile iron (ADI) properties achieved by prior hot isostatic pressing (HIP)

    SciTech Connect

    LaGoy, J.L.; Widmer, R.; Zick, D.H.

    1996-12-31

    Ductile iron obtained from different foundries and cast by dissimilar methods has been successfully hot isostatically pressed (HIPed) before austempering to achieve substantially higher ductilities, without significant detriment to other properties, than those reached by austempering along. HIP was attempted to solve different mechanical deficiencies in austempered ductile iron (ADI) such as the lack of ductility in higher strength grades, inconsistent mechanical properties, and service life limitations. A variety of HIP temperatures were analyzed from near the austenitizing region up to within 56 C (100 F) of the melting point of ductile iron. Microporosity was eliminated by HIP at all temperatures, and subsequent austempering revealed a uniform ADI microstructure. HIP proved successful with both unencapsulated castings and those enclosed within steel canisters. Additional benefits caused by HIP processing of ductile iron castings without the austempering treatment include a significant decrease in mechanical property data scatter, high hardness at reasonable ductility levels, and a substantially reduced scrap rate.

  16. Tonic vibration reflex in Holmes-Adie syndrome: an electrophysiological study

    PubMed Central

    Abbruzzese, Giovanni; Abbruzzese, Michele; Favale, Emilio; Ratto, Sandro

    1979-01-01

    The pathophysiological mechanisms underlying benign areflexia were studied in six patients with Holmes-Adie syndrome. No impairment of sensory conduction velocity of sural nerve was found. A normal tonic vibration reflex was obtained in all patients. H reflex was absent in five patients, but responses like F waves were recorded in three subjects. These findings suggest that muscle spindles are not affected and that spinal motoneurone excitability is normal. PMID:512669

  17. Perfectly matched layers in a divergence preserving ADI scheme for electromagnetics

    SciTech Connect

    Kraus, C.; Adelmann, A.

    2012-01-01

    For numerical simulations of highly relativistic and transversely accelerated charged particles including radiation fast algorithms are needed. While the radiation in particle accelerators has wavelengths in the order of 100 {mu}m the computational domain has dimensions roughly five orders of magnitude larger resulting in very large mesh sizes. The particles are confined to a small area of this domain only. To resolve the smallest scales close to the particles subgrids are envisioned. For reasons of stability the alternating direction implicit (ADI) scheme by Smithe et al. [D.N. Smithe, J.R. Cary, J.A. Carlsson, Divergence preservation in the ADI algorithms for electromagnetics, J. Comput. Phys. 228 (2009) 7289-7299] for Maxwell equations has been adopted. At the boundary of the domain absorbing boundary conditions have to be employed to prevent reflection of the radiation. In this paper we show how the divergence preserving ADI scheme has to be formulated in perfectly matched layers (PML) and compare the performance in several scenarios.

  18. Construction of Novel Saccharomyces cerevisiae Strains for Bioethanol Active Dry Yeast (ADY) Production

    PubMed Central

    Gao, Kehui; Liu, Zewei; Zhang, Xing; Li, Ou; Sun, Jianguo; Zhang, Xiaoyang; Du, Fengguang; Sun, Peiyong; Qu, Aimin; Wu, Xuechang

    2013-01-01

    The application of active dry yeast (ADY) in bioethanol production simplifies operation processes and reduces the risk of bacterial contamination. In the present study, we constructed a novel ADY strain with improved stress tolerance and ethanol fermentation performances under stressful conditions. The industrial Saccharomyces cerevisiae strain ZTW1 showed excellent properties and thus subjected to a modified whole-genome shuffling (WGS) process to improve its ethanol titer, proliferation capability, and multiple stress tolerance for ADY production. The best-performing mutant, Z3-86, was obtained after three rounds of WGS, producing 4.4% more ethanol and retaining 2.15-fold higher viability than ZTW1 after drying. Proteomics and physiological analyses indicated that the altered expression patterns of genes involved in protein metabolism, plasma membrane composition, trehalose metabolism, and oxidative responses contribute to the trait improvement of Z3-86. This work not only successfully developed a novel S. cerevisiae mutant for application in commercial bioethanol production, but also enriched the current understanding of how WGS improves the complex traits of microbes. PMID:24376860

  19. [Genetic analysis of the putative remains of general Władysław Sikorski].

    PubMed

    Kupiec, Tomasz; Branicki, Wojciech

    2009-01-01

    The paper presents results of genetic identification studies carried out in material collected during exhumation of the putative body of general Władysław Sikorski, buried in a sarcophagus in Saint Leonard's crypt in the Wawel Cathedral. The analysis of STR-type autosomal markers, Y-STR markers and sequences of HVI and HVII regions of mitochondrial DNA carried out in samples collected for genetic analysis--fragments of the thigh bone and a tooth--yielded a full set of results. The same mtDNA profile was also determined in hair revealed on the underpants and shirt secured from the studied body. The mitochondrial DNA profile determined in the bone material and also in the hair matched the profile characteristic for a female relative through the maternal line of general Władysław Sikorski. The obtained evidence supports the hypothesis that the studied body is that of general Sikorski. An additional analysis of position SNP rs12913832 located on the HERC2 gene revealed the presence of genotype C/C, which suggests that general Władysław Sikorski had light (most probably blue) eyes. PMID:19711812

  20. Machinability of Austempered Ductile Iron (ADI) Produced by Integrated Green Technology of Continuous Casting-Heat Treatment Processes

    SciTech Connect

    Meena, A.; El Mansori, M.; Ghidossi, P.

    2011-01-17

    This study presents the novel processing technique known as continuous casting-heat treatment processes to produce Austempered Ductile Iron (ADI) which is a new class of ductile iron. ADI is characterized by improved mechanical properties but has low machinability as compared to other cast irons and steel of similar strength. The novel technique is developed by the integration of casting (in die casting) and heat treatment processes in foundry to save cost energy and time. Specimens just after casting were austenitized at 930 deg. C for 90 min and then austempered in fluidized bed at 380 deg. C for 90 and 120 min. Hence, the effect of austempering time on the morphology of retained austenite and mechanical properties of the material were examined and compared with conventionally produced ADI. Drilling tests were then carried out to evaluate the machinability of ADI in terms of cutting forces, chip micro-hardness, chip morphology and surface roughness. The mechanical properties of ADI austempered for 120 min have found to be better as compare to the ADI austempered for 90 min.

  1. Machinability of Austempered Ductile Iron (ADI) Produced by Integrated Green Technology of Continuous Casting-Heat Treatment Processes

    NASA Astrophysics Data System (ADS)

    Meena, A.; El Mansori, M.; Ghidossi, P.

    2011-01-01

    This study presents the novel processing technique known as continuous casting-heat treatment processes to produce Austempered Ductile Iron (ADI) which is a new class of ductile iron. ADI is characterized by improved mechanical properties but has low machinability as compared to other cast irons and steel of similar strength. The novel technique is developed by the integration of casting (in die casting) and heat treatment processes in foundry to save cost energy and time. Specimens just after casting were austenitized at 930° C for 90 min and then austempered in fluidized bed at 380° C for 90 and 120 min. Hence, the effect of austempering time on the morphology of retained austenite and mechanical properties of the material were examined and compared with conventionally produced ADI. Drilling tests were then carried out to evaluate the machinability of ADI in terms of cutting forces, chip micro-hardness, chip morphology and surface roughness. The mechanical properties of ADI austempered for 120 min have found to be better as compare to the ADI austempered for 90 min.

  2. Balancing Patient Access to Fetoscopic Laser Photocoagulation for Twin-to-Twin Transfusion Syndrome With Maintaining Procedural Competence: Are Collaborative Services Part of the Solution?

    PubMed

    Edwards, Andrew G; Teoh, Mark; Hodges, Ryan J; Palma-Dias, Ricardo; Cole, Stephen A; Fung, Alison M; Walker, Susan P

    2016-06-01

    The benefits of fetoscopic laser photocoagulation (FLP) for treatment of twin-to-twin transfusion syndrome (TTTS) have been recognized for over a decade, yet access to FLP remains limited in many settings. This means at a population level, the potential benefits of FLP for TTTS are far from being fully realized. In part, this is because there are many centers where the case volume is relatively low. This creates an inevitable tension; on one hand, wanting FLP to be readily accessible to all women who may need it, yet on the other, needing to ensure that a high degree of procedural competence is maintained. Some of the solutions to these apparently competing priorities may be found in novel training solutions to achieve, and maintain, procedural proficiency, and with the increased utilization of 'competence based' assessment and credentialing frameworks. We suggest an under-utilized approach is the development of collaborative surgical services, where pooling of personnel and resources can improve timely access to surgery, improve standardized assessment and management of TTTS, minimize the impact of the surgical learning curve, and facilitate audit, education, and research. When deciding which centers should offer laser for TTTS and how we decide, we propose some solutions from a collaborative model. PMID:27087260

  3. The significance of excursions above the ADI. Case study: monosodium glutamate.

    PubMed

    Walker, R

    1999-10-01

    Monosodium glutamate (MSG) has been allocated an "ADI not specified" by the JECFA, which indicates that no toxicological concerns arise associated with its use as a food additive in accordance with good manufacturing practice (GMP) and for that reason it is not necessary to allocate a numerical ADI. The question in this case, then, is not whether excursions above a numerical ADI might occur but whether high peak intakes might arise which could invalidate the assumption of absence of hazard. Two major issues have arisen in relation to high intakes of MSG: (1) What is the significance of neural damage (focal necrosis in the hypothalamus) seen following high parenteral or intragastric doses of MSG to neonatal animals and is this a particular risk for children? (2) What is the role of MSG in "Chinese Restaurant Syndrome" (flushing, tightness of the chest, difficulty in breathing, etc.) following consumption of Chinese foods? In relation to the first issue, human studies have been crucial in resolving the question. The threshold blood levels associated with neuronal damage in the mouse (most sensitive species) are 100-130 mumol/dl in neonates rising to > 630 mumol/dl in adult animals. In humans, plasma levels of this magnitude have not been recorded even after bolus doses of 150 mg/kg body wt (ca. 10 g for an adult). Additionally, studies in infants have confirmed that the human baby can metabolize glutamate as effectively as adults. It is concluded that blood levels of glutamate + aspartate do not rise significantly even after abuse doses and babies are no more at risk than adults. Intake levels associated with the use of MSG as a food additive and natural levels of glutamic acid in foods therefore do not raise toxicological concerns even at high peak levels of intake. It is not envisaged that use of MSG according to GMP requires the allocation of a numerical ADI. With regard to the second issue, controlled double-blind crossover studies have failed to establish a

  4. Reduction of numerical diffusion in three-dimensional vortical flows using a coupled Eulerian/Lagrangian solution procedure

    NASA Technical Reports Server (NTRS)

    Felici, Helene M.; Drela, Mark

    1993-01-01

    A new approach based on the coupling of an Eulerian and a Lagrangian solver, aimed at reducing the numerical diffusion errors of standard Eulerian time-marching finite-volume solvers, is presented. The approach is applied to the computation of the secondary flow in two bent pipes and the flow around a 3D wing. Using convective point markers the Lagrangian approach provides a correction of the basic Eulerian solution. The Eulerian flow in turn integrates in time the Lagrangian state-vector. A comparison of coarse and fine grid Eulerian solutions makes it possible to identify numerical diffusion. It is shown that the Eulerian/Lagrangian approach is an effective method for reducing numerical diffusion errors.

  5. A solution procedure for behavior of thick plates on a nonlinear foundation and postbuckling behavior of long plates

    NASA Technical Reports Server (NTRS)

    Stein, M.; Stein, P. A.

    1978-01-01

    Approximate solutions for three nonlinear orthotropic plate problems are presented: (1) a thick plate attached to a pad having nonlinear material properties which, in turn, is attached to a substructure which is then deformed; (2) a long plate loaded in inplane longitudinal compression beyond its buckling load; and (3) a long plate loaded in inplane shear beyond its buckling load. For all three problems, the two dimensional plate equations are reduced to one dimensional equations in the y-direction by using a one dimensional trigonometric approximation in the x-direction. Each problem uses different trigonometric terms. Solutions are obtained using an existing algorithm for simultaneous, first order, nonlinear, ordinary differential equations subject to two point boundary conditions. Ordinary differential equations are derived to determine the variable coefficients of the trigonometric terms.

  6. Hypoxia-induced nitric oxide production and tumour perfusion is inhibited by pegylated arginine deiminase (ADI-PEG20)

    PubMed Central

    Burrows, Natalie; Cane, Gaelle; Robson, Mathew; Gaude, Edoardo; J. Howat, William; Szlosarek, Peter W.; Pedley, R. Barbara; Frezza, Christian; Ashcroft, Margaret; Maxwell, Patrick H.

    2016-01-01

    The hypoxic tumour microenvironment represents an aggressive, therapy-resistant compartment. As arginine is required for specific hypoxia-induced processes, we hypothesised that arginine-deprivation therapy may be useful in targeting hypoxic cancer cells. We explored the effects of the arginine-degrading agent ADI-PEG20 on hypoxia-inducible factor (HIF) activation, the hypoxia-induced nitric oxide (NO) pathway and proliferation using HCT116 and UMUC3 cells and xenografts. The latter lack argininosuccinate synthetase (ASS1) making them auxotrophic for arginine. In HCT116 cells, ADI-PEG20 inhibited hypoxic-activation of HIF-1α and HIF-2α, leading to decreased inducible-nitric oxide synthase (iNOS), NO-production, and VEGF. Interestingly, combining hypoxia and ADI-PEG20 synergistically inhibited ASS1. ADI-PEG20 inhibited mTORC1 and activated the unfolded protein response providing a mechanism for inhibition of HIF and ASS1. ADI-PEG20 inhibited tumour growth, impaired hypoxia-associated NO-production, and decreased vascular perfusion. Expression of HIF-1α/HIF-2α/iNOS and VEGF were reduced, despite an increased hypoxic tumour fraction. Similar effects were observed in UMUC3 xenografts. In summary, ADI-PEG20 inhibits HIF-activated processes in two tumour models with widely different arginine biology. Thus, ADI-PEG20 may be useful in the clinic to target therapy-resistant hypoxic cells in ASS1-proficient tumours and ASS1-deficient tumours. PMID:26972697

  7. Development of a numerical procedure for mixed mode K-solutions and fatigue crack growth in FCC single crystal superalloys

    NASA Astrophysics Data System (ADS)

    Ranjan, Srikant

    2005-11-01

    Fatigue-induced failures in aircraft gas turbine and rocket engine turbopump blades and vanes are a pervasive problem. Turbine blades and vanes represent perhaps the most demanding structural applications due to the combination of high operating temperature, corrosive environment, high monotonic and cyclic stresses, long expected component lifetimes and the enormous consequence of structural failure. Single crystal nickel-base superalloy turbine blades are being utilized in rocket engine turbopumps and jet engines because of their superior creep, stress rupture, melt resistance, and thermomechanical fatigue capabilities over polycrystalline alloys. These materials have orthotropic properties making the position of the crystal lattice relative to the part geometry a significant factor in the overall analysis. Computation of stress intensity factors (SIFs) and the ability to model fatigue crack growth rate at single crystal cracks subject to mixed-mode loading conditions are important parts of developing a mechanistically based life prediction for these complex alloys. A general numerical procedure has been developed to calculate SIFs for a crack in a general anisotropic linear elastic material subject to mixed-mode loading conditions, using three-dimensional finite element analysis (FEA). The procedure does not require an a priori assumption of plane stress or plane strain conditions. The SIFs KI, KII, and KIII are shown to be a complex function of the coupled 3D crack tip displacement field. A comprehensive study of variation of SIFs as a function of crystallographic orientation, crack length, and mode-mixity ratios is presented, based on the 3D elastic orthotropic finite element modeling of tensile and Brazilian Disc (BD) specimens in specific crystal orientations. Variation of SIF through the thickness of the specimens is also analyzed. The resolved shear stress intensity coefficient or effective SIF, Krss, can be computed as a function of crack tip SIFs and the

  8. Material Characterization of Austempered Ductile Iron (ADI) Produced by a Sustainable Continuous Casting-Heat Treatment Process

    NASA Astrophysics Data System (ADS)

    Meena, Anil; El Mansori, Mohamed

    2012-12-01

    Selecting a suitable manufacturing process is one way of achieving sustainability of a product by diminishing energy consumption during its production cycle and improving material efficiency. The article attempts to explore the new processing technology for direct manufacturing of lightweight austempered ductile iron (ADI) casting in a permanent mold. The new processing technology is based on the innovative integrated approach toward casting and heat-treatment process. In this technology, the ductile iron samples obtained using the permanent mold are first austenized immediately after solidification process followed by austempering heat treatment in the fluidized bed and then air cooled at room temperature to obtain ADI material. The influence of austempering time on the microstructural characteristics, mechanical properties, and strain-hardening behavior of ADI was studied. Optical microscopy, scanning electron microscopy (SEM), and X-ray diffraction (XRD) analyses were performed to correlate the mechanical properties with microstructural characteristics. It was observed that the mechanical properties of resulting ADI samples were influenced by the microstructural transformations and varied retained austenite volume fractions obtained due to different austempering time. The results indicate that the strain-hardening behavior of the ADI material is influenced by the carbon content of retained austenite.

  9. Pesticide residue analysis and its relationship to hazard characterisation (ADI/ARfD) and intake estimations (NEDI/NESTI).

    PubMed

    Renwick, Andrew G

    2002-10-01

    Over 800 pesticides are currently approved for use in one or more EU countries. The maximum residue levels (MRL) for agricultural pesticides are derived from field trials conducted under good agricultural practice (GAP). The MRL is a legally enforceable limit related to GAP. The results from field trials would only be used to establish MRLs if the estimated intake of residues did not exceed the acceptable daily intake (ADI) or acute reference dose (ARfD). However, the MRL is not linked to the ADI or ARfD, and could result in intakes considerably below the ADI/ARfD. This disconnection between hazard characterisation (ADI/ARfD) and potential exposure assessment (MRL) means that risk characterisation of pesticide residues is less transparent than for other chemicals present in human food. Residue levels at or below the MRL would not give intakes that exceed the ADI/ARfD but, despite this, there is public concern over such residues. Residue levels above the MRL have to be analysed on a case-by-case basis to determine if the intake could exceed the health-based limits. Other causes of public concern, such as the presence of multiple residues, are currently under investigation. PMID:12400449

  10. An average/deprivation/inequality (ADI) analysis of chronic disease outcomes and risk factors in Argentina

    PubMed Central

    De Maio, Fernando G; Linetzky, Bruno; Virgolini, Mario

    2009-01-01

    Background Recognition of the global economic and epidemiological burden of chronic non-communicable diseases has increased in recent years. However, much of the research on this issue remains focused on individual-level risk factors and neglects the underlying social patterning of risk factors and disease outcomes. Methods Secondary analysis of Argentina's 2005 Encuesta Nacional de Factores de Riesgo (National Risk Factor Survey, N = 41,392) using a novel analytical strategy first proposed by the United Nations Development Programme (UNDP), which we here refer to as the Average/Deprivation/Inequality (ADI) framework. The analysis focuses on two risk factors (unhealthy diet and obesity) and one related disease outcome (diabetes), a notable health concern in Latin America. Logistic regression is used to examine the interplay between socioeconomic and demographic factors. The ADI analysis then uses the results from the logistic regression to identify the most deprived, the best-off, and the difference between the two ideal types. Results Overall, 19.9% of the sample reported being in poor/fair health, 35.3% reported not eating any fruits or vegetables in five days of the week preceding the interview, 14.7% had a BMI of 30 or greater, and 8.5% indicated that a health professional had told them that they have diabetes or high blood pressure. However, significant variation is hidden by these summary measures. Educational attainment displayed the strongest explanatory power throughout the models, followed by household income, with both factors highlighting the social patterning of risk factors and disease outcomes. As educational attainment and household income increase, the probability of poor health, unhealthy diet, obesity, and diabetes decrease. The analyses also point toward important provincial effects and reinforce the notion that both compositional factors (i.e., characteristics of individuals) and contextual factors (i.e., characteristics of places) are

  11. An Integrated Solution-Based Rapid Sample Preparation Procedure for the Analysis of N-Glycans From Therapeutic Monoclonal Antibodies.

    PubMed

    Aich, Udayanath; Liu, Aston; Lakbub, Jude; Mozdzanowski, Jacek; Byrne, Michael; Shah, Nilesh; Galosy, Sybille; Patel, Pramthesh; Bam, Narendra

    2016-03-01

    Consistent glycosylation in therapeutic monoclonal antibodies is a major concern in the biopharmaceutical industry as it impacts the drug's safety and efficacy and manufacturing processes. Large numbers of samples are created for the analysis of glycans during various stages of recombinant proteins drug development. Profiling and quantifying protein N-glycosylation is important but extremely challenging due to its microheterogeneity and more importantly the limitations of existing time-consuming sample preparation methods. Thus, a quantitative method with fast sample preparation is crucial for understanding, controlling, and modifying the glycoform variance in therapeutic monoclonal antibody development. Presented here is a rapid and highly quantitative method for the analysis of N-glycans from monoclonal antibodies. The method comprises a simple and fast solution-based sample preparation method that uses nontoxic reducing reagents for direct labeling of N-glycans. The complete work flow for the preparation of fluorescently labeled N-glycans takes a total of 3 h with less than 30 min needed for the release of N-glycans from monoclonal antibody samples. PMID:26886304

  12. A Microsatellite Guided Insight into the Genetic Status of Adi, an Isolated Hunting-Gathering Tribe of Northeast India

    PubMed Central

    Krithika, S.; Maji, Suvendu; Vasulu, T. S.

    2008-01-01

    Tibeto-Burman populations of India provide an insight into the peopling of India and aid in understanding their genetic relationship with populations of East, South and Southeast Asia. The study investigates the genetic status of one such Tibeto-Burman group, Adi of Arunachal Pradesh based on 15 autosomal microsatellite markers. Further the study examines, based on 9 common microsatellite loci, the genetic relationship of Adi with 16 other Tibeto-Burman speakers of India and 28 neighboring populations of East and Southeast Asia. Overall, the results support the recent formation of the Adi sub-tribes from a putative ancestral group and reveal that geographic contiguity is a major influencing factor of the genetic affinity among the Tibeto-Burman populations of India. PMID:18596928

  13. ADI-FDTD modeling of microwave plasma discharges in air towards fully three-dimensional simulations

    NASA Astrophysics Data System (ADS)

    Kourtzanidis, Konstantinos; Rogier, François; Boeuf, Jean-Pierre

    2015-10-01

    Plasma formation and propagation during microwave breakdown has been extensively studied during the last decades. Numerical modeling of the strong coupling between the high frequency electromagnetic waves and the plasma is still a challenging topic due to the different time and space scales involved. In this article, an Alternative Direction Implicit (ADI) formulation of the Finite Difference Time Domain method for solving Maxwell's equations coupled with a simplified plasma model via the electric current is being proposed, leading to a significant reduction of the computational cost as the CFL criterion for stability of the FDTD method is being removed. An energy estimate has been used to prove the unconditional stability of the ADI-FDTD leapfrog scheme as well as its coupled formulation. The computational efficiency and accuracy of this approach has been studied in a simplified case. The proposed method is applied and validated in two dimensional microwave breakdown in air while its computational efficiency allows for fully three dimensional simulations, an important step for understanding the complex nature and evolution of a microwave plasma discharge and its possible applicability as an aerodynamic flow control method.

  14. Adi Quala: application of solar photovoltaic generation in rural medical centres.

    PubMed

    Allen, P; Welstead, J

    1994-01-01

    Adi Quala is an Eritrean agricultural town of 14,000 people, and is situated about 70 km south of the capital, Asmara and 30 km from the border with Tigray, Ethiopia. On good days electricity was received from Asmara between 0600 h and 2300 h with nothing available outside these hours. These conditions meant the electricity supply had been a constant problem for the Adi Quala hospital which caters for about 50,000 people with 21 staff. It was for this reason that it was chosen for the first solar system, which provides all essential requirements completely independently from the grid connection. This will in turn enable the hospital to increase the range and reliability of services on offer. Three weeks after the arrival of the equipment the elders were able to have a guided tour of their new local facilities. This included 2kW of photovoltaic panels (installed on the roof), batteries and control equipment powering a range of hospital equipment used in the Mother and Child Health Centre, delivery room, wards, dispensary, clinic and laboratory. Their enormous appreciation was very moving and well articulated in an afternoon of music, speeches and feasting. Eritrea's first solar powered hospital was welcomed into capable hands. The pilot project was successfully installed and commissioned in February 1992, and has performed well to date. PMID:8134930

  15. On Bi-Grid Local Mode Analysis of Solution Techniques for 3-D Euler and Navier-Stokes Equations

    NASA Technical Reports Server (NTRS)

    Ibraheem, S. O.; Demuren, A. O.

    1994-01-01

    A procedure is presented for utilizing a bi-grid stability analysis as a practical tool for predicting multigrid performance in a range of numerical methods for solving Euler and Navier-Stokes equations. Model problems based on the convection, diffusion and Burger's equation are used to illustrate the superiority of the bi-grid analysis as a predictive tool for multigrid performance in comparison to the smoothing factor derived from conventional von Neumann analysis. For the Euler equations, bi-grid analysis is presented for three upwind difference based factorizations, namely Spatial, Eigenvalue and Combination splits, and two central difference based factorizations, namely LU and ADI methods. In the former, both the Steger-Warming and van Leer flux-vector splitting methods are considered. For the Navier-Stokes equations, only the Beam-Warming (ADI) central difference scheme is considered. In each case, estimates of multigrid convergence rates from the bi-grid analysis are compared to smoothing factors obtained from single-grid stability analysis. Effects of grid aspect ratio and flow skewness are examined. Both predictions are compared with practical multigrid convergence rates for 2-D Euler and Navier-Stokes solutions based on the Beam-Warming central scheme.

  16. Chiral thiol-stabilized silver nanoclusters with well-resolved optical transitions synthesized by a facile etching procedure in aqueous solutions.

    PubMed

    Cathcart, Nicole; Mistry, Pretesh; Makra, Christy; Pietrobon, Brendan; Coombs, Neil; Jelokhani-Niaraki, Masoud; Kitaev, Vladimir

    2009-05-19

    A novel approach of cyclic reduction in oxidative conditions has been developed to prepare a single dominant species of chiral thiol-stabilized silver nanoclusters (AgNCs). Such AgNCs, which are stable in solution for up to a few days, have been obtained for the first time. The generality of the established procedure is proven by using several enantiomeric water-soluble thiols, including glutathione, as protective ligands. The prepared AgNCs featured prominent optical properties including a single pattern of UV-vis absorption with well-resolved peaks. The chirality of the clusters has been investigated by circular dichroism (CD) spectroscopy. CD spectra displayed strong characteristic signatures in the visible range. Tentative identification of the cluster composition is discussed. PMID:19358597

  17. Combined procedure of vascularized bone marrow transplantation and mesenchymal stem cells graft - an effective solution for rapid hematopoietic reconstitution and prevention of graft-versus-host disease.

    PubMed

    Coliţă, Andrei; Coliţă, Anca; Zamfirescu, Dragos; Lupu, Anca Roxana

    2012-09-01

    Hematopoietic stem cell transplantation (HSCT) is a a standard therapeutic option for several diseases. The success of the procedure depends on quality and quantity of transplanted cells and on stromal capacity to create an optimal microenvironment, that supports survival and development of the hematopoietic elements. Conditions associated with stromal dysfunction lead to slower/insufficient engraftment and/or immune reconstitution. A possible solution to this problem is to realize a combined graft of hematopoietic stem cells along with the medular stroma in the form of vascularized bone marrow transplant (VBMT). Another major drawback of HSCT is the risk of graft versus host disease (GVHD). Recently, mesenchymal stromal cells (MSC) have demonstrated the capacity to down-regulate alloreactive T-cell and to enhance the engraftment. Cotransplantation of MSC could be a therapeutic option for a better engraftment and GVHD prevention. PMID:22677297

  18. Longitudinal Changes in Scores on the Autism Diagnostic Interview-Revised (ADI-R) in Pre-School Children with Autism: Implications for Diagnostic Classification and Symptom Stability

    ERIC Educational Resources Information Center

    Soke, Gnakub Norbert; Philofsky, Amy; Diguiseppi, Carolyn; Lezotte, Dennis; Rogers, Sally; Hepburn, Susan

    2011-01-01

    We prospectively examined mean changes in Autism Diagnostic Interview-Revised (ADI-R) Total and Domains scores and stability of the ADI-R diagnostic classification in 28 children with autism initially assessed at age 2-4 years and reassessed 2 years later. Mean Total, Social Interaction, and Communication scores decreased significantly from Time 1…

  19. Reliability of the ADI-R for the Single Case-Part II: Clinical versus Statistical Significance

    ERIC Educational Resources Information Center

    Cicchetti, Domenic V.; Lord, Catherine; Koenig, Kathy; Klin, Ami; Volkmar, Fred R.

    2014-01-01

    In an earlier investigation, the authors assessed the reliability of the ADI-R when multiple clinicians evaluated a single case, here a female 3 year old toddler suspected of having an autism spectrum disorder (Cicchetti et al. in "J Autism Dev Disord" 38:764-770, 2008). Applying the clinical criteria of Cicchetti and Sparrow ("Am J…

  20. Multisite Study of New Autism Diagnostic Interview-Revised (ADI-R) Algorithms for Toddlers and Young Preschoolers

    ERIC Educational Resources Information Center

    Kim, So Hyun; Thurm, Audrey; Shumway, Stacy; Lord, Catherine

    2013-01-01

    Using two independent datasets provided by National Institute of Health funded consortia, the Collaborative Programs for Excellence in Autism and Studies to Advance Autism Research and Treatment (n = 641) and the National Institute of Mental Health (n = 167), diagnostic validity and factor structure of the new Autism Diagnostic Interview (ADI-R)…

  1. Title: Accelerator Test of an Angle Detecting Inclined Sensor (ADIS) Prototype with Beams of 48Ca and Fragments

    NASA Astrophysics Data System (ADS)

    Connell, J. J.; Lopate, C.; McKibben, R. B.; Enman, A.

    2006-12-01

    The measurement and identification of high energy ions (> few MeV/n) from events originating on the Sun is of direct interest to the Living With a Star Program. These ions are a major source of Single Event Effects (SEE) in space-based electronics. Measurements of these ions also help in understanding phenomena such as Solar particle events and coronal mass ejections. These disturbances can directly affect the Earth and the near-Earth space environment, and thus human technology. The resource constraints on spacecraft generally mean that instruments that measure cosmic rays and Solar energetic particles must have low mass (a few kg) and power (a few W), be robust and reliable yet highly capable. Such instruments should identify ionic species (at least by element, preferably by isotope) from protons through the iron group. The charge and mass resolution of heavy ion instrument in space depends upon determining ions' angles of incidence. The Angle Detecting Inclined Sensor (ADIS) system is a highly innovative and uniquely simple detector configuration used to determine the angle of incidence of heavy ions in space instruments. ADIS replaces complex position sensing detectors (PSDs) with a system of simple, reliable and robust Si detectors inclined at an angle to the instrument axis. In August 2004 we tested ADIS prototypes with a 48Ca beam at the National Superconducting Cyclotron Laboratory's (NSCL) Coupled Cyclotron Facility (CCF). We demonstrate that our prototype charged particle instrument design with an ADIS system has a charge resolution of better than 0.25 e. An ADIS based system is being incorporated into the Energetic Heavy Ion Sensor (EHIS), one of the instruments in the Space Environment In-Situ Suite (SEISS) on the next generation of Geostationary Operational Environmental Satellite (GOES-R) System. An ADIS based system was also selected for the High Energy Particle Sensor (HEPS), one of the instruments in the Space Environment Sensor Suite (SESS) on the

  2. Shared Memory Parallelization of an Implicit ADI-type CFD Code

    NASA Technical Reports Server (NTRS)

    Hauser, Th.; Huang, P. G.

    1999-01-01

    A parallelization study designed for ADI-type algorithms is presented using the OpenMP specification for shared-memory multiprocessor programming. Details of optimizations specifically addressed to cache-based computer architectures are described and performance measurements for the single and multiprocessor implementation are summarized. The paper demonstrates that optimization of memory access on a cache-based computer architecture controls the performance of the computational algorithm. A hybrid MPI/OpenMP approach is proposed for clusters of shared memory machines to further enhance the parallel performance. The method is applied to develop a new LES/DNS code, named LESTool. A preliminary DNS calculation of a fully developed channel flow at a Reynolds number of 180, Re(sub tau) = 180, has shown good agreement with existing data.

  3. Classifying Autism Spectrum Disorders by ADI-R: Subtypes or Severity Gradient?

    PubMed

    Cholemkery, Hannah; Medda, Juliane; Lempp, Thomas; Freitag, Christine M

    2016-07-01

    To reduce phenotypic heterogeneity of Autism spectrum disorders (ASD) and add to the current diagnostic discussion this study aimed at identifying clinically meaningful ASD subgroups. Cluster analyses were used to describe empirically derived groups based on the Autism Diagnostic Interview-revised (ADI-R) in a large sample of n = 463 individuals with ASD aged 3-21. Three clusters were observed. Most severely affected individuals regarding all core symptoms were allocated to cluster 2. Cluster 3 comprised moderate symptom severity of social communication impairments (SCI) and less stereotyped repetitive behavior (RRB). Minor SCI and relatively more RRB characterized cluster 1. This study offers support for both, a symptom profile, and a gradient model of ASD within the spectrum due to the sample included. PMID:26956715

  4. Multi-partitioning for ADI-schemes on message passing architectures

    NASA Technical Reports Server (NTRS)

    Vanderwijngaart, Rob F.

    1994-01-01

    A kind of discrete-operator splitting called Alternating Direction Implicit (ADI) has been found to be useful in simulating fluid flow problems. In particular, it is being used to study the effects of hot exhaust jets from high performance aircraft on landing surfaces. Decomposition techniques that minimize load imbalance and message-passing frequency are described. Three strategies that are investigated for implementing the NAS Scalar Penta-diagonal Parallel Benchmark (SP) are transposition, pipelined Gaussian elimination, and multipartitioning. The multipartitioning strategy, which was used on Ethernet, was found to be the most efficient, although it was considered only a moderate success because of Ethernet's limited communication properties. The efficiency derived largely from the coarse granularity of the strategy, which reduced latencies and allowed overlap of communication and computation.

  5. POD/DEIM nonlinear model order reduction of an ADI implicit shallow water equations model

    NASA Astrophysics Data System (ADS)

    Ştefănescu, R.; Navon, I. M.

    2013-03-01

    In the present paper we consider a 2-D shallow-water equations (SWE) model on a β-plane solved using an alternating direction fully implicit (ADI) finite-difference scheme on a rectangular domain. The scheme was shown to be unconditionally stable for the linearized equations. The discretization yields a number of nonlinear systems of algebraic equations. We then use a proper orthogonal decomposition (POD) to reduce the dimension of the SWE model. Due to the model nonlinearities, the computational complexity of the reduced model still depends on the number of variables of the full shallow - water equations model. By employing the discrete empirical interpolation method (DEIM) we reduce the computational complexity of the reduced order model due to its depending on the nonlinear full dimension model and regain the full model reduction expected from the POD model. To emphasize the CPU gain in performance due to use of POD/DEIM, we also propose testing an explicit Euler finite difference scheme (EE) as an alternative to the ADI implicit scheme for solving the swallow water equations model. We then proceed to assess the efficiency of POD/DEIM as a function of number of spatial discretization points, time steps, and POD basis functions. As was expected, our numerical experiments showed that the CPU time performances of POD/DEIM schemes are proportional to the number of mesh points. Once the number of spatial discretization points exceeded 10000 and for 90 DEIM interpolation points, the CPU time decreased by a factor of 10 in case of POD/DEIM implicit SWE scheme and by a factor of 15 for the POD/DEIM explicit SWE scheme in comparison with the corresponding POD SWE schemes. Moreover, our numerical tests revealed that if the number of points selected by DEIM algorithm reached 50, the approximation errors due to POD/DEIM and POD reduced systems have the same orders of magnitude, thus supporting the theoretical results existing in the literature.

  6. Chemical-specific adjustment factors (inter-species toxicokinetics) to establish the ADI for steviol glycosides.

    PubMed

    Roberts, Ashley; Lynch, Barry; Rogerson, Rebecca; Renwick, Andrew; Kern, Hua; Coffee, Matthew; Cuellar-Kingston, Nicole; Eapen, Alex; Crincoli, Christine; Pugh, George; Bhusari, Sachin; Purkayastha, Sidd; Carakostas, Michael

    2016-08-01

    The acceptable daily intake (ADI) of commercially available steviol glycosides is currently 0-4 mg/kg body weight (bw)/day, based on application of a 100-fold uncertainty factor to a no-observed-adverse-effect-level value from a chronic rat study. Within the 100-fold uncertainty factor is a 10-fold uncertainty factor to account for inter-species differences in toxicokinetics (4-fold) and toxicodynamics (2.5-fold). Single dose pharmacokinetics of stevioside were studied in rats (40 and 1000 mg/kg bw) and in male human subjects (40 mg/kg bw) to generate a chemical-specific, inter-species toxicokinetic adjustment factor. Tmax values for steviol were at ∼8 and ∼20 h after administration in rats and humans, respectively. Peak concentrations of steviol were similar in rats and humans, while steviol glucuronide concentrations were significantly higher in humans. Glucuronidation in rats was not saturated over the dose range 40-1000 mg/kg bw. The AUC0-last for steviol was approximately 2.8-fold greater in humans compared to rats. Chemical-specific adjustment factors for extrapolating toxicokinetics from rat to human of 1 and 2.8 were established based on Cmax and AUC0-last data respectively. Because these factors are lower than the default value of 4.0, a higher ADI for steviol glycosides of between 6 and 16 mg/kg bw/d is justified. PMID:27181453

  7. LSENS: A General Chemical Kinetics and Sensitivity Analysis Code for homogeneous gas-phase reactions. Part 1: Theory and numerical solution procedures

    NASA Technical Reports Server (NTRS)

    Radhakrishnan, Krishnan

    1994-01-01

    LSENS, the Lewis General Chemical Kinetics and Sensitivity Analysis Code, has been developed for solving complex, homogeneous, gas-phase chemical kinetics problems and contains sensitivity analysis for a variety of problems, including nonisothermal situations. This report is part 1 of a series of three reference publications that describe LENS, provide a detailed guide to its usage, and present many example problems. Part 1 derives the governing equations and describes the numerical solution procedures for the types of problems that can be solved. The accuracy and efficiency of LSENS are examined by means of various test problems, and comparisons with other methods and codes are presented. LSENS is a flexible, convenient, accurate, and efficient solver for chemical reaction problems such as static system; steady, one-dimensional, inviscid flow; reaction behind incident shock wave, including boundary layer correction; and perfectly stirred (highly backmixed) reactor. In addition, the chemical equilibrium state can be computed for the following assigned states: temperature and pressure, enthalpy and pressure, temperature and volume, and internal energy and volume. For static problems the code computes the sensitivity coefficients of the dependent variables and their temporal derivatives with respect to the initial values of the dependent variables and/or the three rate coefficient parameters of the chemical reactions.

  8. NHEXAS PHASE I ARIZONA STUDY--STANDARD OPERATING PROCEDURE FOR PREPARATION OF CALIBRATION AND SURROGATE RECOVERY SOLUTIONS FOR GC/MS ANALYSIS OF PESTICIDES (BCO-L-21.1)

    EPA Science Inventory

    The purpose of this SOP is to describe procedures for preparing calibration curve solutions used for gas chromatography/mass spectrometry (GC/MS) analysis of chlorpyrifos, diazinon, malathion, DDT, DDE, DDD, a-chlordane, and g-chlordane in dust, soil, air, and handwipe sample ext...

  9. Scientific evaluation of the safety factor for the acceptable daily intake (ADI). Case study: butylated hydroxyanisole (BHA).

    PubMed

    Würtzen, G

    1993-01-01

    The principles of 'data-derived safety factors' are applied to toxicological and biochemical information on butylated hydroxyanisole (BHA). The calculated safety factor for an ADI is, by this method, comparable to the existing internationally recognized safety evaluations. Relevance for humans of forestomach tumours in rodents is discussed. The method provides a basis for organizing data in a way that permits an explicit assessment of its relevance. PMID:8359313

  10. Orthostatic hypotension and the Holmes-Adie syndrome. A study of two patients with afferent baroreceptor block.

    PubMed

    Johnson, R H; McLellan, D L; Love, D R

    1971-10-01

    Two patients who presented with symptoms due to orthostatic hypotension were found on examination to have the Holmes-Adie syndrome. Physiological investigation suggested that they both had an afferent block from baroreceptors in contrast to the efferent autonomic block found in most other cases of idiopathic orthostatic hypotension, including the cases of multisystem disease, now often called the Shy-Drager syndrome. PMID:5122384

  11. Unveiling the Mechanism of Arginine Transport through AdiC with Molecular Dynamics Simulations: The Guiding Role of Aromatic Residues

    PubMed Central

    Krammer, Eva-Maria; Ghaddar, Kassem; André, Bruno

    2016-01-01

    Commensal and pathogenic enteric bacteria have developed several systems to adapt to proton leakage into the cytoplasm resulting from extreme acidic conditions. One such system involves arginine uptake followed by export of the decarboxylated product agmatine, carried out by the arginine/agmatine antiporter (AdiC), which thus works as a virtual proton pump. Here, using classical and targeted molecular dynamics, we investigated at the atomic level the mechanism of arginine transport through AdiC of E. coli. Overall, our MD simulation data clearly demonstrate that global rearrangements of several transmembrane segments are necessary but not sufficient for achieving transitions between structural states along the arginine translocation pathway. In particular, local structural changes, namely rotameric conversions of two aromatic residues, are needed to regulate access to both the outward- and inward-facing states. Our simulations have also enabled identification of a few residues, overwhelmingly aromatic, which are essential to guiding arginine in the course of its translocation. Most of them belong to gating elements whose coordinated motions contribute to the alternating access mechanism. Their conservation in all known E. coli acid resistance antiporters suggests that the transport mechanisms of these systems share common features. Last but not least, knowledge of the functional properties of AdiC can advance our understanding of the members of the amino acid-carbocation-polyamine superfamily, notably in eukaryotic cells. PMID:27482712

  12. Multiple Timescale Comparison of the Aggregate Drought Index (ADI), the Standardized Precipitation Index (SPI), and Tree Rings in Southern California

    NASA Astrophysics Data System (ADS)

    Keyantash, J.; Sakata, C.

    2012-12-01

    The Aggregate Drought Index (ADI) [Keyantash and Dracup, 2004] is a drought index computed using the principal components of selected hydrological variables such as precipitation, evaporation, streamflow, reservoir storage, soil moisture, and alpine snowpack. Like the widely-used Standardized Precipitation Index (SPI), the ADI possesses the ability to simultaneously assess the shortage/abundance of water over a variety of desired timescales (e.g., 1 month, 12 month, 24 month, etc.). In this paper, the ADI is compared against the SPI, over multiple timescales, in the San Jacinto and Santa Ana River basins of Southern California. The comparisons occur between water years 1962 and 2011, an interval which spans three historic Southern California droughts (1976-77, 1987-1992, and 2007-2009). In both river basins, the drought indices are also compared against tree ring reconstructions of Big Cone Douglas Fir (Pseudotsuga macrocarpa), during a common crossover period in the latter 20th century. For historical perspective, the oldest tree ring reconstruction extends back to the year 1375.

  13. One-step leapfrog ADI-FDTD method for simulating electromagnetic wave propagation in general dispersive media.

    PubMed

    Wang, Xiang-Hua; Yin, Wen-Yan; Chen, Zhi Zhang David

    2013-09-01

    The one-step leapfrog alternating-direction-implicit finite-difference time-domain (ADI-FDTD) method is reformulated for simulating general electrically dispersive media. It models material dispersive properties with equivalent polarization currents. These currents are then solved with the auxiliary differential equation (ADE) and then incorporated into the one-step leapfrog ADI-FDTD method. The final equations are presented in the form similar to that of the conventional FDTD method but with second-order perturbation. The adapted method is then applied to characterize (a) electromagnetic wave propagation in a rectangular waveguide loaded with a magnetized plasma slab, (b) transmission coefficient of a plane wave normally incident on a monolayer graphene sheet biased by a magnetostatic field, and (c) surface plasmon polaritons (SPPs) propagation along a monolayer graphene sheet biased by an electrostatic field. The numerical results verify the stability, accuracy and computational efficiency of the proposed one-step leapfrog ADI-FDTD algorithm in comparison with analytical results and the results obtained with the other methods. PMID:24103929

  14. Unveiling the Mechanism of Arginine Transport through AdiC with Molecular Dynamics Simulations: The Guiding Role of Aromatic Residues.

    PubMed

    Krammer, Eva-Maria; Ghaddar, Kassem; André, Bruno; Prévost, Martine

    2016-01-01

    Commensal and pathogenic enteric bacteria have developed several systems to adapt to proton leakage into the cytoplasm resulting from extreme acidic conditions. One such system involves arginine uptake followed by export of the decarboxylated product agmatine, carried out by the arginine/agmatine antiporter (AdiC), which thus works as a virtual proton pump. Here, using classical and targeted molecular dynamics, we investigated at the atomic level the mechanism of arginine transport through AdiC of E. coli. Overall, our MD simulation data clearly demonstrate that global rearrangements of several transmembrane segments are necessary but not sufficient for achieving transitions between structural states along the arginine translocation pathway. In particular, local structural changes, namely rotameric conversions of two aromatic residues, are needed to regulate access to both the outward- and inward-facing states. Our simulations have also enabled identification of a few residues, overwhelmingly aromatic, which are essential to guiding arginine in the course of its translocation. Most of them belong to gating elements whose coordinated motions contribute to the alternating access mechanism. Their conservation in all known E. coli acid resistance antiporters suggests that the transport mechanisms of these systems share common features. Last but not least, knowledge of the functional properties of AdiC can advance our understanding of the members of the amino acid-carbocation-polyamine superfamily, notably in eukaryotic cells. PMID:27482712

  15. LINCS Authentication Domain Interface (ADI) Logon protocol. (Preliminary specification and implementation guide)

    SciTech Connect

    Nessett, D.M.; Fletcher, J.G.

    1984-10-11

    With the development of computer networking a need has arisen for users to interact with various computers and distributed operating systems from terminals remotely located from those systems. By remotely located terminals we mean those connected to networks using a different protocol family than the computer or distributed operating system being logged onto. Each terminal is said to belong to an authentication domain (NESD84). We express the above requirement as the desirability to provide inter-authentication-domain interactive services. The problems and attendant requirements of accomplishing inter-authentication-domain interactive services are discussed in (NESD84). Readers are assumed to be familiar with the concepts and protocol defined in that document. This specification defines the Authentication Domain Interface (ADI) Logon protocol for the LINCS distributed operating system that in conjunction with the Inter-Authentication-Domain Logon protocol gives users of LINCS terminals the ability to logon to hosts that do not support LINCS. Hereafter, the Inter-Authentication-Domain Logon Protocol is called the IAD Logon protocol for the sake of brevity. In addition, it gives users of terminals connected to networks that do not directly support LINCS the ability to logon and use LINCS distributed resources.

  16. CTEPP STANDARD OPERATING PROCEDURE FOR PREPARATION OF SURROGATE RECOVERY STANDARD AND INTERNAL STANDARD SOLUTIONS FOR POLAR TARGET ANALYTES (SOP-5.26)

    EPA Science Inventory

    This SOP describes the method used for preparing surrogate recovery standard and internal standard solutions for the analysis of polar target analytes. It also describes the method for preparing calibration standard solutions for polar analytes used for gas chromatography/mass sp...

  17. Unsteady Annular Viscous Flows Between Oscillating Cylinders. Part I: Computational Solutions Based on a Time-Integration Method

    NASA Astrophysics Data System (ADS)

    Mateescu, D.; Païdoussis, M. P.; Belanger, F.

    1994-07-01

    The paper presents 2-D and 3-D computational solutions for unsteady annular viscous flows with oscillating boundaries. A time-integration method based on a three-time-level implicit semi-discretization is first formulated in cylindrical coordinates for solving the time-dependent incompressible Navier-Stokes equations. This methods uses a pseudo-time integration with artificial compressibility to advance the solution between consecutive real time levels, and a finite-difference spatial discretization based on a stretched staggered grid. A decoupling procedure based on a factored ADI scheme with lagged nonlinearities reduces the problem to the solution of scalar tridiagonal systems. As a result, this method displays very good computing efficiency and accuracy in all numerical examples analysed. The method is first validated for axisymmetric flow over an annular backstep, by comparison with previous results, and is then employed to analyse 2-D unsteady annular flows due to transverse oscillations of the outer boundary. The results obtained with this method are free of spurious, numerically induced, oscillations in the unsteady pressure, which otherwise arise if a Crank-Nicolson scheme is used instead for time-discretization.The 3-D case of oscillating boundaries in annular axial flow is also analysed with this method by considering a fully developed viscous axial flow between two concentric cylinders when the central portion of the outer cylinder executes transverse translational oscillations; the computational solution thus obtained is of interest in the study of flow-induced vibration problems in such configurations.

  18. The β-Subunit of the SnRK1 Complex Is Phosphorylated by the Plant Cell Death Suppressor Adi31[C][W][OA

    PubMed Central

    Avila, Julian; Gregory, Oliver G.; Su, Dongyin; Deeter, Taunya A.; Chen, Sixue; Silva-Sanchez, Cecilia; Xu, Shouling; Martin, Gregory B.; Devarenne, Timothy P.

    2012-01-01

    The protein kinase AvrPto-dependent Pto-interacting protein3 (Adi3) is a known suppressor of cell death, and loss of its function has been correlated with cell death induction during the tomato (Solanum lycopersicum) resistance response to its pathogen Pseudomonas syringae pv tomato. However, Adi3 downstream interactors that may play a role in cell death regulation have not been identified. We used a yeast two-hybrid screen to identify the plant SnRK1 (for Sucrose non-Fermenting-1-Related Protein Kinase1) protein as an Adi3-interacting protein. SnRK1 functions as a regulator of carbon metabolism and responses to biotic and abiotic stresses. SnRK1 exists in a heterotrimeric complex with a catalytic α-subunit (SnRK1), a substrate-interacting β-subunit, and a regulatory γ-subunit. Here, we show that Adi3 interacts with, but does not phosphorylate, the SnRK1 α-subunit. The ability of Adi3 to phosphorylate the four identified tomato β-subunits was also examined, and it was found that only the Galactose Metabolism83 (Gal83) β-subunit was phosphorylated by Adi3. This phosphorylation site on Gal83 was identified as serine-26 using a mutational approach and mass spectrometry. In vivo expression of Gal83 indicates that it contains multiple phosphorylation sites, one of which is serine-26. An active SnRK1 complex containing Gal83 as the β-subunit and sucrose nonfermenting4 as the γ-subunit was constructed to examine functional aspects of the Adi3 interaction with SnRK1 and Gal83. These assays revealed that Adi3 is capable of suppressing the kinase activity of the SnRK1 complex through Gal83 phosphorylation plus the interaction with SnRK1 and suggested that this function may be related to the cell death suppression activity of Adi3. PMID:22573803

  19. [The problem of cancer in the work of Władysław Kopaczewski (1886-1953)].

    PubMed

    Daszkiewicz, P

    1994-01-01

    Having left Lódź in 1906 Władysław Kopaczewski (1886-1953) studied physics, chemistry and biology at Swiss universities. In 1911 he moved to France where he conducted research in coloidal chemistry simultaneously obtaining a physician's diploma and an MD. During 42 years he spent in France he was dealing with biological systems physics, doing research in medicine, nutritive chemistry and cosmetology. He created an original conception of cancer disease. His theory allowed him to provide the theoretical bases of the cancer physics and to suggest a diagnositic method to direct the search for means of the cancer therapy. PMID:11624929

  20. Review of Corneal Endothelial Specular Microscopy for FDA Clinical Trials of Refractive Procedures, Surgical Devices and New Intraocular Drugs and Solutions

    PubMed Central

    McCarey, Bernard E.; Edelhauser, Henry F.; Lynn, Michael J.

    2010-01-01

    Specular microscopy can provide a non-invasive morphological analysis of the corneal endothelial cell layer from subjects enrolled in clinical trials. The analysis provides a measure of the endothelial cell physiological reserve from aging, ocular surgical procedures, pharmaceutical exposure, and general health of the corneal endothelium. The purpose of this review is to discuss normal and stressed endothelial cell morphology, the techniques for determining the morphology parameters, and clinical trial applications. PMID:18245960

  1. Improvement in Abrasion Wear Resistance and Microstructural Changes with Deep Cryogenic Treatment of Austempered Ductile Cast Iron (ADI)

    NASA Astrophysics Data System (ADS)

    Šolić, Sanja; Godec, Matjaž; Schauperl, Zdravko; Donik, Črtomir

    2016-07-01

    The application of a deep cryogenic treatment during the heat-treatment processes for different types of steels has demonstrated a significant influence on their mechanical and tribological properties. A great deal of research was conducted on steels, as well as on other kinds of materials, such as hard metal, gray cast iron, aluminum, aluminum alloys, etc., but not on austempered ductile iron (ADI). In this research the influence of a deep cryogenic treatment on the microstructure and abrasive wear resistance of austempered ductile iron was investigated. The ductile cast iron was austempered at the upper ausferritic temperature, deep cryogenically treated, and afterwards tempered at two different temperatures. The abrasion wear resistance was tested using the standard ASTM G65 method. The microstructure was characterized using optical microscopy, field-emission scanning electron microscopy, electron back-scattered diffraction, and X-ray diffraction in order to define the microstructural changes that influenced the properties of the ADI. The obtained results show that the deep cryogenic treatment, in combination with different tempering temperatures, affects the matrix microstructure of the austempered ductile iron, which leads to an increase in both the abrasion wear resistance and the hardness.

  2. Elderly Adi women of Arunachal Pradesh: "living encyclopedias" and cultural refugia in biodiversity conservation of the Eastern Himalaya, India.

    PubMed

    Singh, Ranjay K; Rallen, Orik; Padung, Egul

    2013-09-01

    Elderly women of a particular socioecological system are considered to be "living encyclopedias" in biocultural knowledge systems. These women play a pivotal role in retaining and passing on biodiversity-related traditional knowledge to the next generations. Unfortunately the fast changing sociocultural values and the impact of modernity have rendered their knowledge somewhat less valuable and they are being treated as "cultural refugia." Our study on the importance of these women in the conservation of indigenous biodiversity was conducted in 14 randomly selected villages dominated by the Adi tribe of East Siang District, Arunachal Pradesh (northeast India). Data were collected from 531 women (381 elderly and 150 young to middle aged) during 2003-2008 using conventional social science methods and participatory rural appraisal. One innovative method, namely "recipe contest," was devised to mobilize Adi women of each village in order to energies them and explore their knowledge relating to traditional foods, ethnomedicines, and conservation of indigenous biodiversity. Results indicated that 55 plant species are being used by elderly Adi women in their food systems, while 34 plant species are integral parts of ethnomedicinal practices. These women identified different plant species found under multistory canopies of community forests. Elderly women were particularly skilled in preparing traditional foods including beverages and held significantly greater knowledge of indigenous plants than younger women. Lifelong experiences and cultural diversity were found to influence the significance of biodiversity use and conservation. The conservation of biodiversity occurs in three different habitats: jhum lands (shifting cultivation), Morang forest (community managed forests), and home gardens. The knowledge and practice of elderly women about habitats and multistory vegetations, regenerative techniques, selective harvesting, and cultivation practices contribute

  3. Elderly Adi Women of Arunachal Pradesh: "Living Encyclopedias" and Cultural Refugia in Biodiversity Conservation of the Eastern Himalaya, India

    NASA Astrophysics Data System (ADS)

    Singh, Ranjay K.; Rallen, Orik; Padung, Egul

    2013-09-01

    Elderly women of a particular socioecological system are considered to be "living encyclopedias" in biocultural knowledge systems. These women play a pivotal role in retaining and passing on biodiversity-related traditional knowledge to the next generations. Unfortunately the fast changing sociocultural values and the impact of modernity have rendered their knowledge somewhat less valuable and they are being treated as "cultural refugia." Our study on the importance of these women in the conservation of indigenous biodiversity was conducted in 14 randomly selected villages dominated by the Adi tribe of East Siang District, Arunachal Pradesh (northeast India). Data were collected from 531 women (381 elderly and 150 young to middle aged) during 2003-2008 using conventional social science methods and participatory rural appraisal. One innovative method, namely "recipe contest," was devised to mobilize Adi women of each village in order to energies them and explore their knowledge relating to traditional foods, ethnomedicines, and conservation of indigenous biodiversity. Results indicated that 55 plant species are being used by elderly Adi women in their food systems, while 34 plant species are integral parts of ethnomedicinal practices. These women identified different plant species found under multistory canopies of community forests. Elderly women were particularly skilled in preparing traditional foods including beverages and held significantly greater knowledge of indigenous plants than younger women. Lifelong experiences and cultural diversity were found to influence the significance of biodiversity use and conservation. The conservation of biodiversity occurs in three different habitats: jhum lands (shifting cultivation), Morang forest (community managed forests), and home gardens. The knowledge and practice of elderly women about habitats and multistory vegetations, regenerative techniques, selective harvesting, and cultivation practices contribute

  4. Low-rank plus sparse decomposition for exoplanet detection in direct-imaging ADI sequences. The LLSG algorithm

    NASA Astrophysics Data System (ADS)

    Gomez Gonzalez, C. A.; Absil, O.; Absil, P.-A.; Van Droogenbroeck, M.; Mawet, D.; Surdej, J.

    2016-04-01

    Context. Data processing constitutes a critical component of high-contrast exoplanet imaging. Its role is almost as important as the choice of a coronagraph or a wavefront control system, and it is intertwined with the chosen observing strategy. Among the data processing techniques for angular differential imaging (ADI), the most recent is the family of principal component analysis (PCA) based algorithms. It is a widely used statistical tool developed during the first half of the past century. PCA serves, in this case, as a subspace projection technique for constructing a reference point spread function (PSF) that can be subtracted from the science data for boosting the detectability of potential companions present in the data. Unfortunately, when building this reference PSF from the science data itself, PCA comes with certain limitations such as the sensitivity of the lower dimensional orthogonal subspace to non-Gaussian noise. Aims: Inspired by recent advances in machine learning algorithms such as robust PCA, we aim to propose a localized subspace projection technique that surpasses current PCA-based post-processing algorithms in terms of the detectability of companions at near real-time speed, a quality that will be useful for future direct imaging surveys. Methods: We used randomized low-rank approximation methods recently proposed in the machine learning literature, coupled with entry-wise thresholding to decompose an ADI image sequence locally into low-rank, sparse, and Gaussian noise components (LLSG). This local three-term decomposition separates the starlight and the associated speckle noise from the planetary signal, which mostly remains in the sparse term. We tested the performance of our new algorithm on a long ADI sequence obtained on β Pictoris with VLT/NACO. Results: Compared to a standard PCA approach, LLSG decomposition reaches a higher signal-to-noise ratio and has an overall better performance in the receiver operating characteristic space

  5. Low-rank plus sparse decomposition for exoplanet detection in direct-imaging ADI sequences. The LLSG algorithm

    NASA Astrophysics Data System (ADS)

    Gomez Gonzalez, C. A.; Absil, O.; Absil, P.-A.; Van Droogenbroeck, M.; Mawet, D.; Surdej, J.

    2016-05-01

    Context. Data processing constitutes a critical component of high-contrast exoplanet imaging. Its role is almost as important as the choice of a coronagraph or a wavefront control system, and it is intertwined with the chosen observing strategy. Among the data processing techniques for angular differential imaging (ADI), the most recent is the family of principal component analysis (PCA) based algorithms. It is a widely used statistical tool developed during the first half of the past century. PCA serves, in this case, as a subspace projection technique for constructing a reference point spread function (PSF) that can be subtracted from the science data for boosting the detectability of potential companions present in the data. Unfortunately, when building this reference PSF from the science data itself, PCA comes with certain limitations such as the sensitivity of the lower dimensional orthogonal subspace to non-Gaussian noise. Aims: Inspired by recent advances in machine learning algorithms such as robust PCA, we aim to propose a localized subspace projection technique that surpasses current PCA-based post-processing algorithms in terms of the detectability of companions at near real-time speed, a quality that will be useful for future direct imaging surveys. Methods: We used randomized low-rank approximation methods recently proposed in the machine learning literature, coupled with entry-wise thresholding to decompose an ADI image sequence locally into low-rank, sparse, and Gaussian noise components (LLSG). This local three-term decomposition separates the starlight and the associated speckle noise from the planetary signal, which mostly remains in the sparse term. We tested the performance of our new algorithm on a long ADI sequence obtained on β Pictoris with VLT/NACO. Results: Compared to a standard PCA approach, LLSG decomposition reaches a higher signal-to-noise ratio and has an overall better performance in the receiver operating characteristic space

  6. A novel solution procedure for a three-level atom interacting with one-mode cavity field via modified homotopy analysis method

    NASA Astrophysics Data System (ADS)

    Abdel Wahab, N. H.; Salah, Ahmed

    2015-05-01

    In this paper, the interaction of a three-level -configration atom and a one-mode quantized electromagnetic cavity field has been studied. The detuning parameters, the Kerr nonlinearity and the arbitrary form of both the field and intensity-dependent atom-field coupling have been taken into account. The wave function when the atom and the field are initially prepared in the excited state and coherent state, respectively, by using the Schrödinger equation has been given. The analytical approximation solution of this model has been obtained by using the modified homotopy analysis method (MHAM). The homotopy analysis method is mentioned summarily. MHAM can be obtained from the homotopy analysis method (HAM) applied to Laplace, inverse Laplace transform and Pade approximate. MHAM is used to increase the accuracy and accelerate the convergence rate of truncated series solution obtained by the HAM. The time-dependent parameters of the anti-bunching of photons, the amplitude-squared squeezing and the coherent properties have been calculated. The influence of the detuning parameters, Kerr nonlinearity and photon number operator on the temporal behavior of these phenomena have been analyzed. We noticed that the considered system is sensitive to variations in the presence of these parameters.

  7. Comparison of High-Temperature Properties and Thermal Shock Resistance of Austempered Ductile Irons (ADI) with Those of Pearlitic Ductile Cast Irons

    NASA Astrophysics Data System (ADS)

    Ajabshiri, Mehrdad; Sharafi, Shahriar; Moeini, Alireza

    2012-01-01

    High-temperature strength and thermal shock resistance of austempered ductile iron (ADI) in high temperatures because of instability of ausferrite phase has been less interest. The aim of this study is to investigate the tensile properties of ADI and pearlitic ductile cast iron by using the short-time tensile test in high temperatures. Tensile test was conducted in temperatures of 298 K, 673 K, 873 K, and 1073 K (25 °C, 400 °C, 600 °C, and 800 °C). Thermal shock test also was conducted by using the molten lead bath at 1273 K (1000 °C). In this experiment, samples of pearlitic ductile cast iron and ADI were divided in two groups; that after immersing in the molten lead bath for 25 seconds, one group was cooled in the air and other one was quenched in the water. Results showed that strength and thermal shock resistance of ADI samples are higher than those of the pearlitic ductile cast iron.

  8. Insights into the molecular basis for substrate binding and specificity of the wild-type L-arginine/agmatine antiporter AdiC.

    PubMed

    Ilgü, Hüseyin; Jeckelmann, Jean-Marc; Gapsys, Vytautas; Ucurum, Zöhre; de Groot, Bert L; Fotiadis, Dimitrios

    2016-09-13

    Pathogenic enterobacteria need to survive the extreme acidity of the stomach to successfully colonize the human gut. Enteric bacteria circumvent the gastric acid barrier by activating extreme acid-resistance responses, such as the arginine-dependent acid resistance system. In this response, l-arginine is decarboxylated to agmatine, thereby consuming one proton from the cytoplasm. In Escherichia coli, the l-arginine/agmatine antiporter AdiC facilitates the export of agmatine in exchange of l-arginine, thus providing substrates for further removal of protons from the cytoplasm and balancing the intracellular pH. We have solved the crystal structures of wild-type AdiC in the presence and absence of the substrate agmatine at 2.6-Å and 2.2-Å resolution, respectively. The high-resolution structures made possible the identification of crucial water molecules in the substrate-binding sites, unveiling their functional roles for agmatine release and structure stabilization, which was further corroborated by molecular dynamics simulations. Structural analysis combined with site-directed mutagenesis and the scintillation proximity radioligand binding assay improved our understanding of substrate binding and specificity of the wild-type l-arginine/agmatine antiporter AdiC. Finally, we present a potential mechanism for conformational changes of the AdiC transport cycle involved in the release of agmatine into the periplasmic space of E. coli. PMID:27582465

  9. The Discriminative Ability and Diagnostic Utility of the ADOS-G, ADI-R, and GARS for Children in a Clinical Setting

    ERIC Educational Resources Information Center

    Mazefsky, Carla A.; Oswald, Donald P.

    2006-01-01

    Recent years have seen a surge of interest in assessment instruments for diagnosing autism in children. Instruments have generally been developed and evaluated from a research perspective. The Autism Diagnostic Observation Schedule-Generic (ADOS-G), Autism Diagnostic Interview-Revised (ADI-R), and Gilliam Autism Rating Scale (GARS) have received…

  10. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, REMOVAL OF ARSENIC IN DRINKING WATER: PHASE 1-ADI PILOT TEST UNIT NO. 2002-09 WITH MEDIA G2®

    EPA Science Inventory

    Integrity verification testing of the ADI International Inc. Pilot Test Unit No. 2002-09 with MEDIA G2® arsenic adsorption media filter system was conducted at the Hilltown Township Water and Sewer Authority (HTWSA) Well Station No. 1 in Sellersville, Pennsylvania from October 8...

  11. ADI Finite Difference Discretization of the Heston-Hull-White PDE

    NASA Astrophysics Data System (ADS)

    Haentjens, Tinne; Hout, Karel in't.

    2010-09-01

    This paper concerns the efficient numerical solution of the time-dependent, three-dimensional Heston-Hull-White PDE for the fair prices of European call options. The numerical solution method described in this paper consists of a finite difference discretization on non-uniform spatial grids followed by an Alternating Direction Implicit scheme for the time discretization and extends the method recently proved effective by In't Hout & Foulon (2010) for the simpler, two-dimensional Heston PDE.

  12. Clarification Procedure for Gels

    NASA Technical Reports Server (NTRS)

    Barber, Patrick G.; Simpson, Norman R.

    1987-01-01

    Procedure developed to obtain transparent gels with consistencies suitable for crystal growth, by replacing sodium ions in silicate solution with potassium ions. Clarification process uses cation-exchange resin to replace sodium ions in stock solution with potassium ions, placed in 1M solution of soluble potassium salt. Slurry stirred for several hours to allow potassium ions to replace all other cations on resin. Supernatant solution decanted through filter, and beads rinsed with distilled water. Rinsing removes excess salt but leaves cation-exchange beads fully charged with potassium ions.

  13. Heparin and penicillamine-hypotaurine-epinephrine (PHE) solution during bovine in vitro fertilization procedures impair the quality of spermatozoa but improve normal oocyte fecundation and early embryonic development.

    PubMed

    Gonçalves, F S; Barretto, L S S; Arruda, R P; Perri, S H V; Mingoti, G Z

    2014-01-01

    The presence of heparin and a mixture of penicillamine, hypotaurine, and epinephrine (PHE) solution in the in vitro fertilization (IVF) media seem to be a prerequisite when bovine spermatozoa are capacitated in vitro, in order to stimulate sperm motility and acrosome reaction. The present study was designed to determine the effect of the addition of heparin and PHE during IVF on the quality and penetrability of spermatozoa into bovine oocytes and on subsequent embryo development. Sperm quality, evaluated by the integrity of plasma and acrosomal membranes and mitochondrial function, was diminished (P<0.05) in the presence of heparin and PHE. Oocyte penetration and normal pronuclear formation rates, as well as the percentage of zygotes presenting more than two pronuclei, was higher (P<0.05) in the presence of heparin and PHE. No differences were observed in cleavage rates between treatment and control (P>0.05). However, the developmental rate to the blastocyst stage was increased in the presence of heparin and PHE (P>0.05). The quality of embryos that reached the blastocyst stage was evaluated by counting the inner cell mass (ICM) and trophectoderm (TE) cell numbers and total number of cells; the percentage of ICM and TE cells was unaffected (P>0.05) in the presence of heparin and PHE (P<0.05). In conclusion, this study demonstrated that while the supplementation of IVF media with heparin and PHE solution impairs spermatozoa quality, it plays an important role in sperm capacitation, improving pronuclear formation, and early embryonic development. PMID:23949783

  14. [Speech by Carlos Matus in the presentation of Adiós, Señor Presidente].

    PubMed

    Matus, Carlos

    2014-04-01

    The text of this article was written by Carlos Matus and read aloud by him at the first presentation of his book Adiós, Señor Presidente [Goodbye, Mr. President] in Venezuela in 1987. Matus describes the problems of the governments of Latin America of that day, in order to address the growing gap between the capacity of governments to govern and the complexity of social systems. For Matus, bridging this gap requires theories, techniques, systems and methods so as to develop government projects in which the governability of the system is not less than the magnitude of its problems. This document was recovered from the Mario Testa fund, in the Center for Documentation and Research Pensar en Salud (CEDOPS) of the Institute of Collective Health in the Universidad Nacional de Lanús. PMID:24823613

  15. Shifting to settled cultivation: Changing practices among the Adis in Central Arunachal Pradesh, north-east India.

    PubMed

    Teegalapalli, Karthik; Datta, Aparajita

    2016-09-01

    In the hilly tropics, although shifting cultivation is a widespread practice, government policies have attempted to replace it with other land uses. However, several factors determine whether farming communities can make the shift. We tried understanding the factors that facilitate or impede the shift to settled cultivation through interviews with the Adi tribe in north-east India. Although settled cultivation was initiated in the 60s, about 90 % of the families still practise shifting cultivation, observing 13 festivals associated with the annual agricultural calendar. Our results indicate that the economic status of a household determined whether a family undertook settled cultivation, while labour availability was important for shifting cultivation. Often, these nuances are ignored in the Government policies. We conclude that future policies should be mindful of cultural and socio-economic factors that affect the community and of the social-ecological resilience of the landscapes and not use a one-size-fits-all strategy. PMID:26867932

  16. The electromagnetic spike solutions

    NASA Astrophysics Data System (ADS)

    Nungesser, Ernesto; Lim, Woei Chet

    2013-12-01

    The aim of this paper is to use the existing relation between polarized electromagnetic Gowdy spacetimes and vacuum Gowdy spacetimes to find explicit solutions for electromagnetic spikes by a procedure which has been developed by one of the authors for gravitational spikes. We present new inhomogeneous solutions which we call the EME and MEM electromagnetic spike solutions.

  17. Stepwise effects of the BCR sequential chemical extraction procedure on dissolution and metal release from common ferromagnesian clay minerals: a combined solution chemistry and X-ray powder diffraction study.

    PubMed

    Ryan, P C; Hillier, S; Wall, A J

    2008-12-15

    Sequential extraction procedures (SEPs) are commonly used to determine speciation of trace metals in soils and sediments. However, the non-selectivity of reagents for targeted phases has remained a lingering concern. Furthermore, potentially reactive phases such as phyllosilicate clay minerals often contain trace metals in structural sites, and their reactivity has not been quantified. Accordingly, the objective of this study is to analyze the behavior of trace metal-bearing clay minerals exposed to the revised BCR 3-step plus aqua regia SEP. Mineral quantification based on stoichiometric analysis and quantitative powder X-ray diffraction (XRD) documents progressive dissolution of chlorite (CCa-2 ripidolite) and two varieties of smectite (SapCa-2 saponite and SWa-1 nontronite) during steps 1-3 of the BCR procedure. In total, 8 (+/-1) % of ripidolite, 19 (+/-1) % of saponite, and 19 (+/-3) % of nontronite (% mineral mass) dissolved during extractions assumed by many researchers to release trace metals from exchange sites, carbonates, hydroxides, sulfides and organic matter. For all three reference clays, release of Ni into solution is correlated with clay dissolution. Hydrolysis of relatively weak Mg-O bonds (362 kJ/mol) during all stages, reduction of Fe(III) during hydroxylamine hydrochloride extraction and oxidation of Fe(II) during hydrogen peroxide extraction are the main reasons for clay mineral dissolution. These findings underscore the need for precise mineral quantification when using SEPs to understand the origin/partitioning of trace metals with solid phases. PMID:18951614

  18. [Examination procedures].

    PubMed

    Vassault, A; Arnaud, J; Szymanovicz, A

    2010-12-01

    Examination procedures have to be written for each examination according to the standard requirements. Using CE marked devices, technical inserts can be used, but because of their lack of homogeneity, it could be easier to document their use as a standard procedure. Document control policy applies for those procedures, the content of which could be as provided in this document. Electronic manuals can be used as well. PMID:21613016

  19. Numerical Boundary Condition Procedures

    NASA Technical Reports Server (NTRS)

    1981-01-01

    Topics include numerical procedures for treating inflow and outflow boundaries, steady and unsteady discontinuous surfaces, far field boundaries, and multiblock grids. In addition, the effects of numerical boundary approximations on stability, accuracy, and convergence rate of the numerical solution are discussed.

  20. Autism Diagnostic Interview-Revised (ADI-R) Algorithms for Toddlers and Young Preschoolers: Application in a Non-US Sample of 1,104 Children.

    PubMed

    de Bildt, Annelies; Sytema, Sjoerd; Zander, Eric; Bölte, Sven; Sturm, Harald; Yirmiya, Nurit; Yaari, Maya; Charman, Tony; Salomone, Erica; LeCouteur, Ann; Green, Jonathan; Bedia, Ricardo Canal; Primo, Patricia García; van Daalen, Emma; de Jonge, Maretha V; Guðmundsdóttir, Emilía; Jóhannsdóttir, Sigurrós; Raleva, Marija; Boskovska, Meri; Rogé, Bernadette; Baduel, Sophie; Moilanen, Irma; Yliherva, Anneli; Buitelaar, Jan; Oosterling, Iris J

    2015-07-01

    The current study aimed to investigate the Autism Diagnostic Interview-Revised (ADI-R) algorithms for toddlers and young preschoolers (Kim and Lord, J Autism Dev Disord 42(1):82-93, 2012) in a non-US sample from ten sites in nine countries (n = 1,104). The construct validity indicated a good fit of the algorithms. The diagnostic validity was lower, with satisfactorily high specificities but moderate sensitivities. Young children with clinical ASD and lower language ability were largely in the mild-to-moderate or moderate-to-severe concern ranges of the ADI-R, nearly half of the older and phrase speech ASD-group fell into the little-to-no concern range. Although broadly the findings support the toddler algorithms, further work is required to understand why they might have different properties in different samples to further inform research and clinical use. PMID:25682078

  1. Higher-order in time "quasi-unconditionally stable" ADI solvers for the compressible Navier-Stokes equations in 2D and 3D curvilinear domains

    NASA Astrophysics Data System (ADS)

    Bruno, Oscar P.; Cubillos, Max

    2016-02-01

    This paper introduces alternating-direction implicit (ADI) solvers of higher order of time-accuracy (orders two to six) for the compressible Navier-Stokes equations in two- and three-dimensional curvilinear domains. The higher-order accuracy in time results from 1) An application of the backward differentiation formulae time-stepping algorithm (BDF) in conjunction with 2) A BDF-like extrapolation technique for certain components of the nonlinear terms (which makes use of nonlinear solves unnecessary), as well as 3) A novel application of the Douglas-Gunn splitting (which greatly facilitates handling of boundary conditions while preserving higher-order accuracy in time). As suggested by our theoretical analysis of the algorithms for a variety of special cases, an extensive set of numerical experiments clearly indicate that all of the BDF-based ADI algorithms proposed in this paper are "quasi-unconditionally stable" in the following sense: each algorithm is stable for all couples (h , Δt)of spatial and temporal mesh sizes in a problem-dependent rectangular neighborhood of the form (0 ,Mh) × (0 ,Mt). In other words, for each fixed value of Δt below a certain threshold, the Navier-Stokes solvers presented in this paper are stable for arbitrarily small spatial mesh-sizes. The second-order formulation has further been rigorously shown to be unconditionally stable for linear hyperbolic and parabolic equations in two-dimensional space. Although implicit ADI solvers for the Navier-Stokes equations with nominal second-order of temporal accuracy have been proposed in the past, the algorithms presented in this paper are the first ADI-based Navier-Stokes solvers for which second-order or better accuracy has been verified in practice under non-trivial (non-periodic) boundary conditions.

  2. Autism Diagnostic Interview-Revised (ADI-R) Algorithms for Toddlers and Young Preschoolers: Application in a Non-US Sample of 1,104 Children

    ERIC Educational Resources Information Center

    de Bildt, Annelies; Sytema, Sjoerd; Zander, Eric; Bölte, Sven; Sturm, Harald; Yirmiya, Nurit; Yaari, Maya; Charman, Tony; Salomone, Erica; LeCouteur, Ann; Green, Jonathan; Bedia, Ricardo Canal; Primo, Patricia García; van Daalen, Emma; de Jonge, Maretha V.; Guðmundsdóttir, Emilía; Jóhannsdóttir, Sigurrós; Raleva, Marija; Boskovska, Meri; Rogé, Bernadette; Baduel, Sophie; Moilanen, Irma; Yliherva, Anneli; Buitelaar, Jan; Oosterling, Iris J.

    2015-01-01

    The current study aimed to investigate the Autism Diagnostic Interview-Revised (ADI-R) algorithms for toddlers and young preschoolers (Kim and Lord, "J Autism Dev Disord" 42(1):82-93, 2012) in a non-US sample from ten sites in nine countries (n = 1,104). The construct validity indicated a good fit of the algorithms. The diagnostic…

  3. Comparative toxicokinetics of low-viscosity mineral oil in Fischer 344 rats, Sprague-Dawley rats, and humans--implications for an Acceptable Daily Intake (ADI).

    PubMed

    Boogaard, Peter J; Goyak, Katy O; Biles, Robert W; van Stee, Leo L P; Miller, Matthew S; Miller, Mary Jo

    2012-06-01

    Oral repeated-dose studies with low-viscosity mineral oils showed distinct species and strain differences, which are hypothesized to be due to differences in bioavailability, with Fischer 344 rats being more susceptible than Sprague-Dawley rats or dogs. Sensitive analytical methodology was developed for accurate measurement of low levels of mineral hydrocarbons and applied in single-dose toxicokinetics studies in rats and humans. Fischer 344 rats showed a 4-fold higher AUC(0-∞) and consistently higher blood and liver concentrations were found than Sprague-Dawley rats. Hepatic mineral hydrocarbon concentration tracked the blood concentration in both strains, indicating that blood concentrations can serve as functional surrogate measure for hepatic concentrations. In human volunteers receiving 1mg/kg body weight of low-viscosity white oil, all blood concentrations of mineral hydrocarbons were below the detection limit. Comparison with threshold blood concentrations associated with NOAELs in both rat strains, indicate that the margin-of-exposure is at least 37-fold. Using an internal dose metric rather than applied dose reduces the uncertainty around the temporary ADI considerably since it intrinsically accounts for intra- and inter-species differences. The current data support replacement of the temporary ADI of 0.01 mg/kg/day by a (permanent) ADI of at least 1.0mg/kg/day for low- and medium-viscosity mineral oils. PMID:22425899

  4. New radiometric age of volcanic rocks in the central Eritrean plateau (from Asmara to Adi Quala): Considerations on stratigraphy and correlations

    NASA Astrophysics Data System (ADS)

    Zanettin, B.; Bellieni, G.; Visentin, E. Justin

    2006-06-01

    New radiometric data have recently been acquired on basalt and rhyolite sampled at various levels of the volcanic sequence occurring in the central Eritrean plateau, confirming the stratigraphic reconstruction suggested in a previous paper [Zanettin, B., Bellieni, G., Justin Visentin, E., Haile, T., 1999. The volcanic rocks of the Eritrean plateau: stratigraphy and evolution. Acta Volcanologica 11(1), 183-193]. New considerations indicate the tholeiitic, not alkaline, nature of the Asmara basalt. Doubts about the relative age of the Aiba/Alaji and Asmara basalts have now been clarified: they are, at least partly, coeval (about 30 Ma old). The Serae rhyolite intercalated in the Adi Ugri basalt turns out to be about 24 Ma old, like the more abundant ignimbrite outcropping in the Senafe area, of which it is the westernmost extension. Its age confirms that it does not correspond to the trachyte intercalated in the Oligocene stratoid basalt of the Adwa-Axum area (where the Adi Ugri basalt probably also occurs, intercalated with the Serae trachyte and rhyolite). The upper part of the Adi Ugri basalt is 22 Ma old (an age consistent with the finding of a Deinotherium tooth). The radiometric age of these rocks also confirms already indicated correlations between Eritrean and Ethiopian volcanic formations.

  5. Road failure caused by landslide in north Ethiopia: A case study from Dedebit - Adi-Remets road segment

    NASA Astrophysics Data System (ADS)

    Fisseha, Shimeles; Mewa, Getnet

    2016-06-01

    Landslide represents one of the main constraints for the development of road infrastructures in many parts of Ethiopia. While rugged topography, intra-sedimentary clay horizons, thick talus deposits at the foot of hills and wide spread tectonic fissures and faults account for the prominent inducing factors, heavy monsoon rainfall is the most common triggering factor for the majority of road failures caused by landslides. We present the results of geoelectrical investigation of a landslide that caused a severe damage to the Dedebit-Adi-Remets segment of the recently built highway that transects the high relief and mountainous region of Tigray, northern Ethiopia. Vertical Electrical Sounding (VES) measurements were taken at twelve points, systematically distributed to cover the affected area. The resulting geo-electric sections revealed that the shallow subsurface is composed of four distinct geo-electric layers. The corresponding major lithological successions, from top to bottom, are: unconsolidated conglomeratic layer, moist silty clay, moderately weathered and fractured basaltic rock and a possibly saturated portion of the basalt. Major discontinuities, indications of structural weak zones, have also been inferred based on abrupt vertical shift in geo-electrical layer boundaries between neighboring soundings. Based on the main findings, the road failure in the study area appears to be caused by a downslope movement of the subgrade composed of top unconsolidated sediment soaked with water from heavy rain. The location of the probable slip plane could be the inclined interface between the conductive clayey soil and the underlying resistive weathered basalt.

  6. Dental Procedures.

    PubMed

    Ramponi, Denise R

    2016-01-01

    Dental problems are a common complaint in emergency departments in the United States. There are a wide variety of dental issues addressed in emergency department visits such as dental caries, loose teeth, dental trauma, gingival infections, and dry socket syndrome. Review of the most common dental blocks and dental procedures will allow the practitioner the opportunity to make the patient more comfortable and reduce the amount of analgesia the patient will need upon discharge. Familiarity with the dental equipment, tooth, and mouth anatomy will help prepare the practitioner for to perform these dental procedures. PMID:27482994

  7. Volatile N-nitrosamine formation after intake of nitrate at the ADI level in combination with an amine-rich diet.

    PubMed Central

    Vermeer, I T; Pachen, D M; Dallinga, J W; Kleinjans, J C; van Maanen, J M

    1998-01-01

    Formation of nitrite from ingested nitrate can result in several adverse health effects and implies a genotoxic risk as a consequence of endogenous formation of carcinogenic N-nitroso compounds. We studied the formation of volatile N-nitrosamines after intake of nitrate at the acceptable daily intake (ADI) level in combination with a fish meal rich in amines as nitrosatable precursors. Twenty-five volunteers consumed this meal during 7 consecutive days; a diet low in nitrate was consumed during 1 week before and 1 week after the test week. Nitrate intake at the ADI level resulted in a significant rise in mean salivary nitrate and nitrite concentrations. Mean urinary nitrate excretion increased from 76 mg/24 hr in the first control week to 194 and 165 mg/24 hr in the test week, followed by a decline to 77 mg/24 hr in the second control week. The urine samples were analyzed for volatile N-nitrosamines, and both N-nitrosodimethylamine (NDMA) and N-nitrosopiperidine (NPIP) were detected in the samples. Mean urinary NDMA excretion significantly increased from 287 ng/24 hr in the control week to 871 and 640 ng/24 hr in the test week and declined to 383 ng/24 hr in the second control week. Excretion of NPIP was not directly related to the nitrate intake and composition of the diet. Nitrate excretion and NDMA excretion were significantly correlated, as well as salivary nitrate and nitrite concentration and NDMA excretion. We conclude that nitrate intake at the ADI level in combination with a fish meal containing nitrosatable precursors increases NDMA excretion in urine and thus demonstrates increased formation of carcinogenic N-nitrosamines. Images Figure 1 Figure 2 Figure 3 PMID:9681972

  8. Procedural simulation.

    PubMed

    Patel, Aalpen A; Glaiberman, Craig; Gould, Derek A

    2007-06-01

    In the past few decades, medicine has started to look at the potential use of simulators in medical education. Procedural medicine lends itself well to the use of simulators. Efforts are under way to establish national agendas to change the way medical education is approached and thereby improve patient safety. Universities, credentialing organizations, and hospitals are investing large sums of money to build and use simulation centers for undergraduate and graduate medical education. PMID:17574195

  9. Procedural knowledge

    NASA Technical Reports Server (NTRS)

    Georgeff, Michael P.; Lansky, Amy L.

    1986-01-01

    Much of commonsense knowledge about the real world is in the form of procedures or sequences of actions for achieving particular goals. In this paper, a formalism is presented for representing such knowledge using the notion of process. A declarative semantics for the representation is given, which allows a user to state facts about the effects of doing things in the problem domain of interest. An operational semantics is also provided, which shows how this knowledge can be used to achieve particular goals or to form intentions regarding their achievement. Given both semantics, the formalism additionally serves as an executable specification language suitable for constructing complex systems. A system based on this formalism is described, and examples involving control of an autonomous robot and fault diagnosis for NASA's Space Shuttle are provided.

  10. Water based on a molecular model behaves like a hard-sphere solvent for a nonpolar solute when the reference interaction site model and related theories are employed.

    PubMed

    Hayashi, Tomohiko; Oshima, Hiraku; Harano, Yuichi; Kinoshita, Masahiro

    2016-09-01

    For neutral hard-sphere solutes, we compare the reduced density profile of water around a solute g(r), solvation free energy μ, energy U, and entropy S under the isochoric condition predicted by the two theories: dielectrically consistent reference interaction site model (DRISM) and angle-dependent integral equation (ADIE) theories. A molecular model for water pertinent to each theory is adopted. The hypernetted-chain (HNC) closure is employed in the ADIE theory, and the HNC and Kovalenko-Hirata (K-H) closures are tested in the DRISM theory. We also calculate g(r), U, S, and μ of the same solute in a hard-sphere solvent whose molecular diameter and number density are set at those of water, in which case the radial-symmetric integral equation (RSIE) theory is employed. The dependences of μ, U, and S on the excluded volume and solvent-accessible surface area are analyzed using the morphometric approach (MA). The results from the ADIE theory are in by far better agreement with those from computer simulations available for g(r), U, and μ. For the DRISM theory, g(r) in the vicinity of the solute is quite high and becomes progressively higher as the solute diameter d U increases. By contrast, for the ADIE theory, it is much lower and becomes further lower as d U increases. Due to unphysically positive U and significantly larger |S|, μ from the DRISM theory becomes too high. It is interesting that μ, U, and S from the K-H closure are worse than those from the HNC closure. Overall, the results from the DRISM theory with a molecular model for water are quite similar to those from the RSIE theory with the hard-sphere solvent. Based on the results of the MA analysis, we comparatively discuss the different theoretical methods for cases where they are applied to studies on the solvation of a protein. PMID:27366886

  11. Water based on a molecular model behaves like a hard-sphere solvent for a nonpolar solute when the reference interaction site model and related theories are employed

    NASA Astrophysics Data System (ADS)

    Hayashi, Tomohiko; Oshima, Hiraku; Harano, Yuichi; Kinoshita, Masahiro

    2016-09-01

    For neutral hard-sphere solutes, we compare the reduced density profile of water around a solute g(r), solvation free energy μ, energy U, and entropy S under the isochoric condition predicted by the two theories: dielectrically consistent reference interaction site model (DRISM) and angle-dependent integral equation (ADIE) theories. A molecular model for water pertinent to each theory is adopted. The hypernetted-chain (HNC) closure is employed in the ADIE theory, and the HNC and Kovalenko–Hirata (K–H) closures are tested in the DRISM theory. We also calculate g(r), U, S, and μ of the same solute in a hard-sphere solvent whose molecular diameter and number density are set at those of water, in which case the radial-symmetric integral equation (RSIE) theory is employed. The dependences of μ, U, and S on the excluded volume and solvent-accessible surface area are analyzed using the morphometric approach (MA). The results from the ADIE theory are in by far better agreement with those from computer simulations available for g(r), U, and μ. For the DRISM theory, g(r) in the vicinity of the solute is quite high and becomes progressively higher as the solute diameter d U increases. By contrast, for the ADIE theory, it is much lower and becomes further lower as d U increases. Due to unphysically positive U and significantly larger |S|, μ from the DRISM theory becomes too high. It is interesting that μ, U, and S from the K–H closure are worse than those from the HNC closure. Overall, the results from the DRISM theory with a molecular model for water are quite similar to those from the RSIE theory with the hard-sphere solvent. Based on the results of the MA analysis, we comparatively discuss the different theoretical methods for cases where they are applied to studies on the solvation of a protein.

  12. [Species identification of the fragment of wood found in the left eye socket bone during exhumation of general Władysław Sikorski's corpse].

    PubMed

    Wasik, Radosław

    2009-01-01

    During the exhumation of general Władysław Sikorski's corpse, a fragment of wood was found embedded in the left eye socket bone. The wood fragment was referred by the Institute of Forensic Research to the laboratory of Department of Forest and Wood Utilization, University of Agriculture in Krakow, where investigations were performed, aiming at determining the species of the wood. The fragment was cut into 20 microm thick microtome scraps of three anatomy sections: transverse, tangential and radial. The scraps were immersed in 99.8% ethyl alcohol for 24 hours and then for about 1 hour in xylene. Subsequently, they were placed between a microscope slide and a cover-glass in Canada balsam. The thus prepared scraps were then analyzed with the use of a Jenaval Carl Zeiss microscope. On the basis of microscope observations it was determined that the investigated fragment of wood belonged to Douglas-fir species (Pseudotsuga menziesii (Mirb.) Franco). PMID:19711820

  13. Artificial compressibility methods for numerical solutions of transonic full potential equation

    NASA Technical Reports Server (NTRS)

    Hafez, M.; Murman, E.; South, J.

    1979-01-01

    New methods for transonic flow computations based on the full potential equation in conservation form are presented. The idea is to modify slightly the density (due to the artificial viscosity in the supersonic region), and solve the resulting elliptic-like problem iteratively. It is shown that standard discretization techniques (central differencing) as well as some standard iterative procedures (SOR, ADI, and explicit methods) are applicable to the modified transonic mixed-type equation. Calculations of transonic flows around cylinders and airfoils are discussed with special emphasis on the explicit methods that are suitable for vector processing on the STAR 100 computer.

  14. School Solutions for Cyberbullying

    ERIC Educational Resources Information Center

    Sutton, Susan

    2009-01-01

    This article offers solutions and steps to prevent cyberbullying. Schools can improve their ability to handle cyberbullying by educating staff members, students, and parents and by implementing rules and procedures for how to handle possible incidents. Among the steps is to include a section about cyberbullying and expectations in the student…

  15. Efficient solution on solving 3D Maxwell equations using stable semi-implicit splitting method

    NASA Astrophysics Data System (ADS)

    Cen, Wei; Gu, Ning

    2016-05-01

    In this paper, we propose an efficient solution on solving 3-dimensional (3D) time-domain Maxwell equations using the semi-implicit Crank-Nicholson (CN) method for time domain discretization with advantage of unconditional time stability. By applying the idea of fractional steps method (FSM) to the CN scheme, the proposed method provides a much simpler and efficient implementation than a direct implementation of the CN scheme. Compared with the alternating-direction implicit (ADI) method and explicit finite-difference time-domain approach (FDTD), it significantly saves the computational resource like memory and CPU time while remains similar numerical accuracy.

  16. The benefits of using customized procedure packs.

    PubMed

    Baines, R; Colquhoun, G; Jones, N; Bateman, R

    2001-01-01

    Discrete item purchasing is the traditional approach for hospitals to obtain consumable supplies for theatre procedures. Although most items are relatively low cost, the management and co-ordination of the supply chain, raising orders, controlling stock, picking and delivering to each operating theatre can be complex and costly. Customized procedure packs provide a solution. PMID:11892113

  17. Multiple Comparison Procedures when Population Variances Differ.

    ERIC Educational Resources Information Center

    Olejnik, Stephen; Lee, JaeShin

    A review of the literature on multiple comparison procedures suggests several alternative approaches for comparing means when population variances differ. These include: (1) the approach of P. A. Games and J. F. Howell (1976); (2) C. W. Dunnett's C confidence interval (1980); and (3) Dunnett's T3 solution (1980). These procedures control the…

  18. Pipe Cleaning Operating Procedures

    SciTech Connect

    Clark, D.; Wu, J.; /Fermilab

    1991-01-24

    This cleaning procedure outlines the steps involved in cleaning the high purity argon lines associated with the DO calorimeters. The procedure is broken down into 7 cycles: system setup, initial flush, wash, first rinse, second rinse, final rinse and drying. The system setup involves preparing the pump cart, line to be cleaned, distilled water, and interconnecting hoses and fittings. The initial flush is an off-line flush of the pump cart and its plumbing in order to preclude contaminating the line. The wash cycle circulates the detergent solution (Micro) at 180 degrees Fahrenheit through the line to be cleaned. The first rinse is then intended to rid the line of the majority of detergent and only needs to run for 30 minutes and at ambient temperature. The second rinse (if necessary) should eliminate the remaining soap residue. The final rinse is then intended to be a check that there is no remaining soap or other foreign particles in the line, particularly metal 'chips.' The final rinse should be run at 180 degrees Fahrenheit for at least 90 minutes. The filters should be changed after each cycle, paying particular attention to the wash cycle and the final rinse cycle return filters. These filters, which should be bagged and labeled, prove that the pipeline is clean. Only distilled water should be used for all cycles, especially rinsing. The level in the tank need not be excessive, merely enough to cover the heater float switch. The final rinse, however, may require a full 50 gallons. Note that most of the details of the procedure are included in the initial flush description. This section should be referred to if problems arise in the wash or rinse cycles.

  19. A direct element resequencing procedure

    NASA Technical Reports Server (NTRS)

    Akin, J. E.; Fulford, R. E.

    1978-01-01

    Element by element frontal solution algorithms are utilized in many of the existing finite element codes. The overall computational efficiency of this type of procedure is directly related to the element data input sequence. Thus, it is important to have a pre-processor which will resequence these data so as to reduce the element wavefronts to be encountered in the solution algorithm. A direct element resequencing algorithm is detailed for reducing element wavefronts. It also generates computational by products that can be utilized in pre-front calculations and in various post-processors. Sample problems are presented and compared with other algorithms.

  20. Collected radiochemical and geochemical procedures

    SciTech Connect

    Kleinberg, J

    1990-05-01

    This revision of LA-1721, 4th Ed., Collected Radiochemical Procedures, reflects the activities of two groups in the Isotope and Nuclear Chemistry Division of the Los Alamos National Laboratory: INC-11, Nuclear and radiochemistry; and INC-7, Isotope Geochemistry. The procedures fall into five categories: I. Separation of Radionuclides from Uranium, Fission-Product Solutions, and Nuclear Debris; II. Separation of Products from Irradiated Targets; III. Preparation of Samples for Mass Spectrometric Analysis; IV. Dissolution Procedures; and V. Geochemical Procedures. With one exception, the first category of procedures is ordered by the positions of the elements in the Periodic Table, with separate parts on the Representative Elements (the A groups); the d-Transition Elements (the B groups and the Transition Triads); and the Lanthanides (Rare Earths) and Actinides (the 4f- and 5f-Transition Elements). The members of Group IIIB-- scandium, yttrium, and lanthanum--are included with the lanthanides, elements they resemble closely in chemistry and with which they occur in nature. The procedures dealing with the isolation of products from irradiated targets are arranged by target element.

  1. MITG test procedure and results

    SciTech Connect

    Eck, M.B.; Mukunda, M.

    1983-01-01

    Elements and modules for Radioisotope Thermoelectric Generator have been performance tested since the inception of the RTG program. These test articles seldom resembled flight hardware and often lacked adequate diagnostic instrumentation. Because of this, performance problems were not identified in the early stage of program development. The lack of test data in an unexpected area often hampered the development of a problem solution. A procedure for conducting the MITG Test was developed in an effort to obtain data in a systematic, unambiguous manner. This procedure required the development of extensive data acquisition software and test automation. The development of a facility to implement the test procedure, the facility hardware and software requirements, and the results of the MITG testing are the subject of this paper.

  2. Forensic medical examination of the corpse of General Władysław Sikorski, a putative victim of assassination in 1943.

    PubMed

    Konopka, Tomasz; Gross, Adam; Woźniak, Krzysztof; Kłys, Małgorzata

    2010-10-10

    The Krakow Department of Forensic Medicine was granted a unique opportunity to examine the body of a historical figure, i.e. General Władysław Sikorski, the Prime Minister of the Polish government in exile, deceased in 1943. General Sikorski died in the crash of a Liberator aircraft at Gibraltar, and the British commission investigating the crash decided it had been an accident. In the past several decades, doubts have been repeatedly expressed as to the circumstances of the General's death and the theory of assassination has become very popular. On November 25, 2008, the General's corpse buried in the cathedral of the Royal Castle on Wawel Hill in Krakow was exhumed and the body was thoroughly examined. The examinations demonstrated numerous fractures of the cranium, spine and extremities, the character of which corresponded to effects of an air crash. Based on corpse examination alone it was impossible to establish whether the air crash had been an effect of sabotage or an ill-fated accident. Although no typical evidence of intravitality was found, such as bruises or fat embolisms, yet the character of some fractures suggested that they had been incurred intravitally. These were represented by a spiral fracture of the femoral bone shaft, a fracture of the sustentaculum tali of the calcaneal bone and fractures of the transverse processes of the lumbar vertebrae. PMID:20537474

  3. Electromarking solution

    DOEpatents

    Bullock, Jonathan S.; Harper, William L.; Peck, Charles G.

    1976-06-22

    This invention is directed to an aqueous halogen-free electromarking solution which possesses the capacity for marking a broad spectrum of metals and alloys selected from different classes. The aqueous solution comprises basically the nitrate salt of an amphoteric metal, a chelating agent, and a corrosion-inhibiting agent.

  4. Solution of Poisson equations for 3-dimensional grid generations. [computations of a flow field over a thin delta wing

    NASA Technical Reports Server (NTRS)

    Fujii, K.

    1983-01-01

    A method for generating three dimensional, finite difference grids about complicated geometries by using Poisson equations is developed. The inhomogenous terms are automatically chosen such that orthogonality and spacing restrictions at the body surface are satisfied. Spherical variables are used to avoid the axis singularity, and an alternating-direction-implicit (ADI) solution scheme is used to accelerate the computations. Computed results are presented that show the capability of the method. Since most of the results presented have been used as grids for flow-field computations, this is indicative that the method is a useful tool for generating three-dimensional grids about complicated geometries.

  5. Automation of a procedure to find the polynomial which best fits (kappa, c1, c2, T) data of electrolyte solutions by non-linear regression analysis using MATHEMATICA software.

    PubMed

    Cortazar, E; Usobiaga, A; Fernández, L A; de, Diego A; Madariaga, J M

    2002-02-01

    A MATHEMATICA package, 'CONDU.M', has been developed to find the polynomial in concentration and temperature which best fits conductimetric data of the type (kappa, c, T) or (kappa, c1, c2, T) of electrolyte solutions (kappa: specific conductivity; ci: concentration of component i; T: temperature). In addition, an interface, 'TKONDU', has been written in the TCL/Tk language to facilitate the use of CONDU.M by an operator not familiarised with MATHEMATICA. All this software is available on line (UPV/EHU, 2001). 'CONDU.M' has been programmed to: (i) select the optimum grade in c1 and/or c2; (ii) compare models with linear or quadratic terms in temperature; (iii) calculate the set of adjustable parameters which best fits data; (iv) simplify the model by elimination of 'a priori' included adjustable parameters which after the regression analysis result in low statistical significance; (v) facilitate the location of outlier data by graphical analysis of the residuals; and (vi) provide quantitative statistical information on the quality of the fit, allowing a critical comparison among different models. Due to the multiple options offered the software allows testing different conductivity models in a short time, even if a large set of conductivity data is being considered simultaneously. Then, the user can choose the best model making use of the graphical and statistical information provided in the output file. Although the program has been initially designed to treat conductimetric data, it can be also applied for processing data with similar structure, e.g. (P, c, T) or (P, c1, c2, T), being P any appropriate transport, physical or thermodynamic property. PMID:11868914

  6. Computerized procedures system

    DOEpatents

    Lipner, Melvin H.; Mundy, Roger A.; Franusich, Michael D.

    2010-10-12

    An online data driven computerized procedures system that guides an operator through a complex process facility's operating procedures. The system monitors plant data, processes the data and then, based upon this processing, presents the status of the current procedure step and/or substep to the operator. The system supports multiple users and a single procedure definition supports several interface formats that can be tailored to the individual user. Layered security controls access privileges and revisions are version controlled. The procedures run on a server that is platform independent of the user workstations that the server interfaces with and the user interface supports diverse procedural views.

  7. 40 CFR 60.648 - Optional procedure for measuring hydrogen sulfide in acid gas-Tutwiler Procedure. 1

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... hydrogen sulfide in acid gas-Tutwiler Procedure. 1 60.648 Section 60.648 Protection of Environment..., 2011 § 60.648 Optional procedure for measuring hydrogen sulfide in acid gas—Tutwiler Procedure. 1 1 Gas... dilute solutions are used. In principle, this method consists of titrating hydrogen sulfide in a...

  8. 40 CFR 60.5408 - What is an optional procedure for measuring hydrogen sulfide in acid gas-Tutwiler Procedure?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... measuring hydrogen sulfide in acid gas-Tutwiler Procedure? 60.5408 Section 60.5408 Protection of Environment... § 60.5408 What is an optional procedure for measuring hydrogen sulfide in acid gas—Tutwiler Procedure... of titrating hydrogen sulfide in a gas sample directly with a standard solution of iodine....

  9. 40 CFR 60.648 - Optional procedure for measuring hydrogen sulfide in acid gas-Tutwiler Procedure. 1

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... hydrogen sulfide in acid gas-Tutwiler Procedure. 1 60.648 Section 60.648 Protection of Environment..., 2011 § 60.648 Optional procedure for measuring hydrogen sulfide in acid gas—Tutwiler Procedure. 1 1 Gas... dilute solutions are used. In principle, this method consists of titrating hydrogen sulfide in a...

  10. 40 CFR 60.5408 - What is an optional procedure for measuring hydrogen sulfide in acid gas-Tutwiler Procedure?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... measuring hydrogen sulfide in acid gas-Tutwiler Procedure? 60.5408 Section 60.5408 Protection of Environment... § 60.5408 What is an optional procedure for measuring hydrogen sulfide in acid gas—Tutwiler Procedure... of titrating hydrogen sulfide in a gas sample directly with a standard solution of iodine....

  11. Employer coverage of experimental medical procedures.

    PubMed

    Mora, J

    1986-01-01

    Should an employer's medical plan pay for organ transplants, in vitro fertilization or other "experimental" or "high-risk" procedures? Most employers have looked to insurance companies to decide, but the rising frequency and cost of such procedures, coupled with the litigation potential they pose, raise policy making issues that employers themselves must face. A Hewitt Associates Consultant describes some problems and some solutions for insured and self-funded medical plans. PMID:10279242

  12. Public Sector Impasse Procedures.

    ERIC Educational Resources Information Center

    Vadakin, James C.

    The subject of collective bargaining negotiation impasse procedures in the public sector, which includes public school systems, is a broad one. In this speech, the author introduces the various procedures, explains how they are used, and lists their advantages and disadvantages. Procedures discussed are mediation, fact-finding, arbitration,…

  13. Third-order RKR procedure

    NASA Astrophysics Data System (ADS)

    Pardo, A.; Camacho, J. J.; Poyato, J. M. L.; Fernandez-Alonso, J. I.

    1986-03-01

    Potential energy curves for the X 1Σ +state of 6LiH, 7LiH and 6LiD, 7LiD molecules have been calculated by the third-order RKR inversion procedure by including the Kaise correction. The results are in agreement with previously obtained curves by other authors using differents methods. As a check, the exact vibrational eigenfunctions, appropriate to these potentials, are obtained by direct numerical solutions of the radical Schrödinger equation.

  14. Crew procedures development techniques

    NASA Technical Reports Server (NTRS)

    Arbet, J. D.; Benbow, R. L.; Hawk, M. L.; Mangiaracina, A. A.; Mcgavern, J. L.; Spangler, M. C.

    1975-01-01

    The study developed requirements, designed, developed, checked out and demonstrated the Procedures Generation Program (PGP). The PGP is a digital computer program which provides a computerized means of developing flight crew procedures based on crew action in the shuttle procedures simulator. In addition, it provides a real time display of procedures, difference procedures, performance data and performance evaluation data. Reconstruction of displays is possible post-run. Data may be copied, stored on magnetic tape and transferred to the document processor for editing and documentation distribution.

  15. Polymer solutions

    SciTech Connect

    Krawczyk, Gerhard Erich; Miller, Kevin Michael

    2011-07-26

    There is provided a method of making a polymer solution comprising polymerizing one or more monomer in a solvent, wherein said monomer comprises one or more ethylenically unsaturated monomer that is a multi-functional Michael donor, and wherein said solvent comprises 40% or more by weight, based on the weight of said solvent, one or more multi-functional Michael donor.

  16. Sound Solutions

    ERIC Educational Resources Information Center

    Starkman, Neal

    2007-01-01

    Poor classroom acoustics are impairing students' hearing and their ability to learn. However, technology has come up with a solution: tools that focus voices in a way that minimizes intrusive ambient noise and gets to the intended receiver--not merely amplifying the sound, but also clarifying and directing it. One provider of classroom audio…

  17. Solution-Assisted Optical Contacting

    NASA Technical Reports Server (NTRS)

    Shaddock, Daniel; Abramovici, Alexander

    2004-01-01

    A modified version of a conventional optical-contact procedure has been found to facilitate alignment of optical components. The optical-contact procedure (called simply optical contacting in the art) is a standard means of bonding two highly polished and cleaned glass optical components without using epoxies or other adhesives. In its unmodified form, the procedure does not involve the use of any foreign substances at all: components to be optically contacted are dry. The main disadvantage of conventional optical contacting is that it is difficult or impossible to adjust the alignment of the components once they have become bonded. In the modified version of the procedure, a drop of an alcohol-based optical cleaning solution (isopropyl alcohol or similar) is placed at the interface between two components immediately before putting the components together. The solution forms a weak bond that gradually strengthens during a time interval of the order of tens of seconds as the alcohol evaporates. While the solution is present, the components can be slid, without loss of contact, to perform fine adjustments of their relative positions. After about a minute, most of the alcohol has evaporated and the optical components are rigidly attached to each other. If necessary, more solution can be added to enable resumption or repetition of the adjustment until the components are aligned to the required precision.

  18. Higher-order numerical solutions using cubic splines

    NASA Technical Reports Server (NTRS)

    Rubin, S. G.; Khosla, P. K.

    1976-01-01

    A cubic spline collocation procedure was developed for the numerical solution of partial differential equations. This spline procedure is reformulated so that the accuracy of the second-derivative approximation is improved and parallels that previously obtained for lower derivative terms. The final result is a numerical procedure having overall third-order accuracy of a nonuniform mesh. Solutions using both spline procedures, as well as three-point finite difference methods, are presented for several model problems.

  19. Procedure improvement enterprises

    SciTech Connect

    Davis, P.L.

    1992-01-01

    At Allied-Signal's Kansas City Division (KCD), we recognize the importance of clear, concise and timely procedures for sharing information, promoting consistency and documenting the way we do business. For these reasons, the KCD has gathered a team of employees to analyze the process we currently use to publish procedures, identify the procedure needs of KCD employees, and design a system that meets or exceeds the requirements and expectations of DOE. The name of our group is the Procedure Improvement Enterprise Critical Process Team, or PIE CPT. The mission statement of Procedure Improvement Enterprise is to develop and implement within the Kansas City Division an effective nd flexible procedure system that will establish a model of excellence, will emphasize team work and open communication, and will ensure compliance with corporate/government requirements.

  20. Procedure improvement enterprises

    SciTech Connect

    Davis, P.L.

    1992-01-01

    At Allied-Signal`s Kansas City Division (KCD), we recognize the importance of clear, concise and timely procedures for sharing information, promoting consistency and documenting the way we do business. For these reasons, the KCD has gathered a team of employees to analyze the process we currently use to publish procedures, identify the procedure needs of KCD employees, and design a system that meets or exceeds the requirements and expectations of DOE. The name of our group is the Procedure Improvement Enterprise Critical Process Team, or PIE CPT. The mission statement of Procedure Improvement Enterprise is to develop and implement within the Kansas City Division an effective nd flexible procedure system that will establish a model of excellence, will emphasize team work and open communication, and will ensure compliance with corporate/government requirements.

  1. Pyroshock prediction procedures

    NASA Astrophysics Data System (ADS)

    Piersol, Allan G.

    2002-05-01

    Given sufficient effort, pyroshock loads can be predicted by direct analytical procedures using Hydrocodes that analytically model the details of the pyrotechnic explosion and its interaction with adjacent structures, including nonlinear effects. However, it is more common to predict pyroshock environments using empirical procedures based upon extensive studies of past pyroshock data. Various empirical pyroshock prediction procedures are discussed, including those developed by the Jet Propulsion Laboratory, Lockheed-Martin, and Boeing.

  2. Candidate CDTI procedures study

    NASA Technical Reports Server (NTRS)

    Ace, R. E.

    1981-01-01

    A concept with potential for increasing airspace capacity by involving the pilot in the separation control loop is discussed. Some candidate options are presented. Both enroute and terminal area procedures are considered and, in many cases, a technologically advanced Air Traffic Control structure is assumed. Minimum display characteristics recommended for each of the described procedures are presented. Recommended sequencing of the operational testing of each of the candidate procedures is presented.

  3. Compatible solutes

    PubMed Central

    Hill, Colin

    2010-01-01

    Recently we reported a role for compatible solute uptake in mediating bile tolerance and increased gastrointestinal persistence in the foodborne pathogen Listeria monocytogenes.1 Herein, we review the evolution in our understanding of how these low molecular weight molecules contribute to growth and survival of the pathogen both inside and outside the body, and how this stress survival mechanism may ultimately be used to target and kill the pathogen. PMID:21326913

  4. A self-correcting procedure for computational liquid metal magnetohydrodynamics

    NASA Astrophysics Data System (ADS)

    Araseki, Hideo; Kotake, Shoji

    1994-02-01

    This paper describes a new application of the self-correcting procedure to computational liquid metal magnetohydrodynamics. In this procedure, the conservation law of the electric current density incorporated in a Poisson equation for the scalar potential plays an important role of correcting this potential. This role is similar to that of the conservation law of mass in a Poisson equation for the pressure. Some numerical results show that the proposed self-correcting procedure can provide a more accurate numerical solution of the electric current density than the existing solution procedure.

  5. A computational procedure for large rotational motions in multibody dynamics

    NASA Technical Reports Server (NTRS)

    Park, K. C.; Chiou, J. C.

    1987-01-01

    A computational procedure suitable for the solution of equations of motion for multibody systems is presented. The present procedure adopts a differential partitioning of the translational motions and the rotational motions. The translational equations of motion are then treated by either a conventional explicit or an implicit direct integration method. A principle feature of this procedure is a nonlinearly implicit algorithm for updating rotations via the Euler four-parameter representation. This procedure is applied to the rolling of a sphere through a specific trajectory, which shows that it yields robust solutions.

  6. Spatial-multiblock procedure for radiation heat transfer

    SciTech Connect

    Chai, J.C.; Moder, J.P.

    1996-12-31

    A spatial-multiblock procedure for radiation heat transfer is presented in this article. The proposed procedure is applicable to isothermal or nonisothermal, absorbing, emitting and scattering of transparent media with black or reflecting walls. Although not shown in this article, the procedure is also applicable to nongray conditions. The proposed procedure can be used with the discrete ordinates method and the finite volume method. The heat transfer rate, net radiation power and other full-range and half-range moments are conserved between spatial blocks by the proposed procedure. The utilities of the proposed procedure are shown using four sample problems. The solutions indicate that the multiblock procedure can reproduce the results of a single-block procedure even when very coarse spatial grids are used in the multiblock procedure.

  7. Science Safety Procedure Handbook.

    ERIC Educational Resources Information Center

    Lynch, Mervyn A.; Offet, Lorna

    This booklet outlines general safety procedures in the areas of: (1) student supervision; (2) storage safety regulations, including lists of incompatible chemicals, techniques of disposal and storage; (3) fire; and (4) first aid. Specific sections exist for elementary, junior high school, senior high school, in which special procedures are…

  8. Handbook of radiologic procedures

    SciTech Connect

    Hedgcock, M.

    1986-01-01

    This book is organized around radiologic procedures with each discussed from the points of view of: indications, contraindications, materials, method of procedures and complications. Covered in this book are: emergency radiology chest radiology, bone radiology, gastrointestinal radiology, GU radiology, pediatric radiology, computerized tomography, neuroradiology, visceral and peripheral angiography, cardiovascular radiology, nuclear medicine, lymphangiography, and mammography.

  9. Procedural Learning and Dyslexia

    ERIC Educational Resources Information Center

    Nicolson, R. I.; Fawcett, A. J.; Brookes, R. L.; Needle, J.

    2010-01-01

    Three major "neural systems", specialized for different types of information processing, are the sensory, declarative, and procedural systems. It has been proposed ("Trends Neurosci.",30(4), 135-141) that dyslexia may be attributable to impaired function in the procedural system together with intact declarative function. We provide a brief…

  10. Coombs' Type Response Procedures.

    ERIC Educational Resources Information Center

    Koehler, Roger A.

    This paper provides substantial evidence in favor of the continued use of conventional objective testing procedures in lieu of either the Coombs' cross-out technique or the Dressel and Schmid free-choice response procedure. From the studies presented in this paper, the tendency is for the cross-out and the free choice methods to yield a decrement…

  11. Enucleation Procedure Manual.

    ERIC Educational Resources Information Center

    Davis, Kevin; Poston, George

    This manual provides information on the enucleation procedure (removal of the eyes for organ banks). An introductory section focuses on the anatomy of the eye and defines each of the parts. Diagrams of the eye are provided. A list of enucleation materials follows. Other sections present outlines of (1) a sterile procedure; (2) preparation for eye…

  12. Basic Planning Procedures.

    ERIC Educational Resources Information Center

    Nevada State Dept. of Education, Carson City.

    The procedure described herein entails the use of an educational planning consultant, statements of educational and service problems to be solved by proposed construction, a site plan, and architect selection. Also included in the outline of procedures is a tentative statement of specifications, tentative cost estimates and matrices for conducting…

  13. Policies and Procedures.

    ERIC Educational Resources Information Center

    Klein, William D.; McKenna, Bernard

    1997-01-01

    States that, although policies and procedure documents play an important role in developing and maintaining a consistent quality of interaction in organizations, research literature is weak in this area. Initiates further discussion by defining and describing policy/procedure documents. Identifies a third kind, work instructions. Uses a genre…

  14. 46 CFR 153.1065 - Sodium chlorate solutions.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Sodium chlorate solutions. 153.1065 Section 153.1065... Procedures § 153.1065 Sodium chlorate solutions. (a) No person may load sodium chlorate solutions into a... solutions are immediately washed away. Approval of Surveyors and Handling of Categories A, B, C, and D...

  15. 46 CFR 153.1065 - Sodium chlorate solutions.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Sodium chlorate solutions. 153.1065 Section 153.1065... Procedures § 153.1065 Sodium chlorate solutions. (a) No person may load sodium chlorate solutions into a... solutions are immediately washed away. Approval of Surveyors and Handling of Categories A, B, C, and D...

  16. Toddler test or procedure preparation

    MedlinePlus

    ... procedure; Test/procedure preparation - toddler; Preparing for a medical test or procedure - toddler ... A, Franz BE. Practical communication guide for paediatric procedures. Emerg ... PMID: 19588390 www.ncbi.nlm.nih.gov/pubmed/19588390 .

  17. Colorimetric determination of tobramycin in parenteral solutions.

    PubMed

    Das Gupta, V

    1988-06-01

    A colorimetric method based on a reaction between tobramycin and alkaline copper sulphate solution has been proposed to quantify tobramycin in injections. The excipients present and normal saline did not interfere with the assay procedure. A tobramycin sample which was decomposed using either sulphuric acid or sodium hydroxide solution indicated fairly good stability on both sides of the pH scale. PMID:3209627

  18. On Browne's Solution for Oblique Procrustes Rotation

    ERIC Educational Resources Information Center

    Cramer, Elliot M.

    1974-01-01

    A form of Browne's (1967) solution of finding a least squares fit to a specified factor structure is given which does not involve solution of an eigenvalue problem. It suggests the possible existence of a singularity, and a simple modification of Browne's computational procedure is proposed. (Author/RC)

  19. Minimally invasive procedures

    PubMed Central

    Baltayiannis, Nikolaos; Michail, Chandrinos; Lazaridis, George; Anagnostopoulos, Dimitrios; Baka, Sofia; Mpoukovinas, Ioannis; Karavasilis, Vasilis; Lampaki, Sofia; Papaiwannou, Antonis; Karavergou, Anastasia; Kioumis, Ioannis; Pitsiou, Georgia; Katsikogiannis, Nikolaos; Tsakiridis, Kosmas; Rapti, Aggeliki; Trakada, Georgia; Zissimopoulos, Athanasios; Zarogoulidis, Konstantinos

    2015-01-01

    Minimally invasive procedures, which include laparoscopic surgery, use state-of-the-art technology to reduce the damage to human tissue when performing surgery. Minimally invasive procedures require small “ports” from which the surgeon inserts thin tubes called trocars. Carbon dioxide gas may be used to inflate the area, creating a space between the internal organs and the skin. Then a miniature camera (usually a laparoscope or endoscope) is placed through one of the trocars so the surgical team can view the procedure as a magnified image on video monitors in the operating room. Specialized equipment is inserted through the trocars based on the type of surgery. There are some advanced minimally invasive surgical procedures that can be performed almost exclusively through a single point of entry—meaning only one small incision, like the “uniport” video-assisted thoracoscopic surgery (VATS). Not only do these procedures usually provide equivalent outcomes to traditional “open” surgery (which sometimes require a large incision), but minimally invasive procedures (using small incisions) may offer significant benefits as well: (I) faster recovery; (II) the patient remains for less days hospitalized; (III) less scarring and (IV) less pain. In our current mini review we will present the minimally invasive procedures for thoracic surgery. PMID:25861610

  20. Solution Leaching

    NASA Astrophysics Data System (ADS)

    Chun, Tiejun; Zhu, Deqing; Pan, Jian; He, Zhen

    2014-06-01

    Recovery of alumina from magnetic separation tailings of red mud has been investigated by Na2CO3 solution leaching. X-ray diffraction (XRD) results show that most of the alumina is present as 12CaO·7Al2O3 and CaO·Al2O3 in the magnetic separation tailings. The shrinking core model was employed to describe the leaching kinetics. The results show that the calculated activation energy of 8.31 kJ/mol is characteristic for an internal diffusion-controlled process. The kinetic equation can be used to describe the leaching process. The effects of Na2CO3 concentration, liquid-to-solid ratio, and particle size on recovery of Al2O3 were examined.

  1. Dynamic alarm response procedures

    SciTech Connect

    Martin, J.; Gordon, P.; Fitch, K.

    2006-07-01

    The Dynamic Alarm Response Procedure (DARP) system provides a robust, Web-based alternative to existing hard-copy alarm response procedures. This paperless system improves performance by eliminating time wasted looking up paper procedures by number, looking up plant process values and equipment and component status at graphical display or panels, and maintenance of the procedures. Because it is a Web-based system, it is platform independent. DARP's can be served from any Web server that supports CGI scripting, such as Apache{sup R}, IIS{sup R}, TclHTTPD, and others. DARP pages can be viewed in any Web browser that supports Javascript and Scalable Vector Graphics (SVG), such as Netscape{sup R}, Microsoft Internet Explorer{sup R}, Mozilla Firefox{sup R}, Opera{sup R}, and others. (authors)

  2. Definition of "experimental procedures".

    PubMed

    2009-11-01

    This Practice Committee Opinion provides a revised definition of "experimental procedures." This version replaces the document "Definition of Experimental" that was published most recently in November 2008. PMID:19836733

  3. Common Interventional Radiology Procedures

    MedlinePlus

    ... of common interventional techniques is below. Common Interventional Radiology Procedures Angiography An X-ray exam of the ... into the vertebra. Copyright © 2016 Society of Interventional Radiology. All rights reserved. 3975 Fair Ridge Drive • Suite ...

  4. Cardiac ablation procedures

    MedlinePlus

    ... Accessory pathway, such as Wolff-Parkinson-White Syndrome Atrial fibrillation and atrial flutter Ventricular tachycardia ... consensus statement on catheter and surgical ablation of atrial fibrillation: ... for personnel, policy, procedures and follow-up. ...

  5. Costing imaging procedures.

    PubMed

    Bretland, P M

    1988-01-01

    The existing National Health Service financial system makes comprehensive costing of any service very difficult. A method of costing using modern commercial methods has been devised, classifying costs into variable, semi-variable and fixed and using the principle of overhead absorption for expenditure not readily allocated to individual procedures. It proved possible to establish a cost spectrum over the financial year 1984-85. The cheapest examinations were plain radiographs outside normal working hours, followed by plain radiographs, ultrasound, special procedures, fluoroscopy, nuclear medicine, angiography and angiographic interventional procedures in normal working hours. This differs from some published figures, particularly those in the Körner report. There was some overlap between fluoroscopic interventional and the cheaper nuclear medicine procedures, and between some of the more expensive nuclear medicine procedures and the cheaper angiographic ones. Only angiographic and the few more expensive nuclear medicine procedures exceed the cost of the inpatient day. The total cost of the imaging service to the district was about 4% of total hospital expenditure. It is shown that where more procedures are undertaken, the semi-variable and fixed (including capital) elements of the cost decrease (and vice versa) so that careful study is required to assess the value of proposed economies. The method is initially time-consuming and requires a computer system with 512 Kb of memory, but once the basic costing system is established in a department, detailed financial monitoring should become practicable. The necessity for a standard comprehensive costing procedure of this nature, based on sound cost accounting principles, appears inescapable, particularly in view of its potential application to management budgeting. PMID:3349241

  6. Life's Solution

    NASA Astrophysics Data System (ADS)

    Morris, Simon Conway

    2003-09-01

    Life's Solution builds a persuasive case for the predictability of evolutionary outcomes. The case rests on a remarkable compilation of examples of convergent evolution, in which two or more lineages have independently evolved similar structures and functions. The examples range from the aerodynamics of hovering moths and hummingbirds to the use of silk by spiders and some insects to capture prey. Going against the grain of Darwinian orthodoxy, this book is a must read for anyone grappling with the meaning of evolution and our place in the Universe. Simon Conway Morris is the Ad Hominen Professor in the Earth Science Department at the University of Cambridge and a Fellow of St. John's College and the Royal Society. His research focuses on the study of constraints on evolution, and the historical processes that lead to the emergence of complexity, especially with respect to the construction of the major animal body parts in the Cambrian explosion. Previous books include The Crucible of Creation (Getty Center for Education in the Arts, 1999) and co-author of Solnhofen (Cambridge, 1990). Hb ISBN (2003) 0-521-82704-3

  7. Life's Solution

    NASA Astrophysics Data System (ADS)

    Morris, Simon Conway

    2004-11-01

    Life's Solution builds a persuasive case for the predictability of evolutionary outcomes. The case rests on a remarkable compilation of examples of convergent evolution, in which two or more lineages have independently evolved similar structures and functions. The examples range from the aerodynamics of hovering moths and hummingbirds to the use of silk by spiders and some insects to capture prey. Going against the grain of Darwinian orthodoxy, this book is a must read for anyone grappling with the meaning of evolution and our place in the Universe. Simon Conway Morris is the Ad Hominen Professor in the Earth Science Department at the University of Cambridge and a Fellow of St. John's College and the Royal Society. His research focuses on the study of constraints on evolution, and the historical processes that lead to the emergence of complexity, especially with respect to the construction of the major animal body parts in the Cambrian explosion. Previous books include The Crucible of Creation (Getty Center for Education in the Arts, 1999) and co-author of Solnhofen (Cambridge, 1990). Hb ISBN (2003) 0-521-82704-3

  8. Alloy solution hardening with solute pairs

    DOEpatents

    Mitchell, John W.

    1976-08-24

    Solution hardened alloys are formed by using at least two solutes which form associated solute pairs in the solvent metal lattice. Copper containing equal atomic percentages of aluminum and palladium is an example.

  9. Transition between free-space Helmholtz equation solutions with plane sources and parabolic wave equation solutions.

    PubMed

    Mahillo-Isla, R; Gonźalez-Morales, M J; Dehesa-Martínez, C

    2011-06-01

    The slowly varying envelope approximation is applied to the radiation problems of the Helmholtz equation with a planar single-layer and dipolar sources. The analyses of such problems provide procedures to recover solutions of the Helmholtz equation based on the evaluation of solutions of the parabolic wave equation at a given plane. Furthermore, the conditions that must be fulfilled to apply each procedure are also discussed. The relations to previous work are given as well. PMID:21643384

  10. Advance crew procedures development techniques: Procedures generation program requirements document

    NASA Technical Reports Server (NTRS)

    Arbet, J. D.; Benbow, R. L.; Hawk, M. L.

    1974-01-01

    The Procedures Generation Program (PGP) is described as an automated crew procedures generation and performance monitoring system. Computer software requirements to be implemented in PGP for the Advanced Crew Procedures Development Techniques are outlined.

  11. Mobile Energy Laboratory Procedures

    SciTech Connect

    Armstrong, P.R.; Batishko, C.R.; Dittmer, A.L.; Hadley, D.L.; Stoops, J.L.

    1993-09-01

    Pacific Northwest Laboratory (PNL) has been tasked to plan and implement a framework for measuring and analyzing the efficiency of on-site energy conversion, distribution, and end-use application on federal facilities as part of its overall technical support to the US Department of Energy (DOE) Federal Energy Management Program (FEMP). The Mobile Energy Laboratory (MEL) Procedures establish guidelines for specific activities performed by PNL staff. PNL provided sophisticated energy monitoring, auditing, and analysis equipment for on-site evaluation of energy use efficiency. Specially trained engineers and technicians were provided to conduct tests in a safe and efficient manner with the assistance of host facility staff and contractors. Reports were produced to describe test procedures, results, and suggested courses of action. These reports may be used to justify changes in operating procedures, maintenance efforts, system designs, or energy-using equipment. The MEL capabilities can subsequently be used to assess the results of energy conservation projects. These procedures recognize the need for centralized NM administration, test procedure development, operator training, and technical oversight. This need is evidenced by increasing requests fbr MEL use and the economies available by having trained, full-time MEL operators and near continuous MEL operation. DOE will assign new equipment and upgrade existing equipment as new capabilities are developed. The equipment and trained technicians will be made available to federal agencies that provide funding for the direct costs associated with MEL use.

  12. Procedural learning and dyslexia.

    PubMed

    Nicolson, R I; Fawcett, A J; Brookes, R L; Needle, J

    2010-08-01

    Three major 'neural systems', specialized for different types of information processing, are the sensory, declarative, and procedural systems. It has been proposed (Trends Neurosci., 30(4), 135-141) that dyslexia may be attributable to impaired function in the procedural system together with intact declarative function. We provide a brief overview of the increasing evidence relating to the hypothesis, noting that the framework involves two main claims: first that 'neural systems' provides a productive level of description avoiding the underspecificity of cognitive descriptions and the overspecificity of brain structural accounts; and second that a distinctive feature of procedural learning is its extended time course, covering from minutes to months. In this article, we focus on the second claim. Three studies-speeded single word reading, long-term response learning, and overnight skill consolidation-are reviewed which together provide clear evidence of difficulties in procedural learning for individuals with dyslexia, even when the tasks are outside the literacy domain. The educational implications of the results are then discussed, and in particular the potential difficulties that impaired overnight procedural consolidation would entail. It is proposed that response to intervention could be better predicted if diagnostic tests on the different forms of learning were first undertaken. PMID:20680991

  13. Percutaneous urinary procedures - discharge

    MedlinePlus

    ... x 4-inch gauze sponges, tape, connecting tube, hydrogen peroxide, and warm water (plus a clean container to ... cotton swab soaked with a solution of half hydrogen peroxide and half warm water. Pat it dry with ...

  14. Percutaneous urinary procedures - discharge

    MedlinePlus

    ... x 4-inch gauze sponges, tape, connecting tube, hydrogen peroxide, and warm water (plus a clean container ... cotton swab soaked with a solution of half hydrogen peroxide and half warm water. Pat it dry ...

  15. Formulation of numerical procedures for dynamic analysis of spinning structures

    NASA Technical Reports Server (NTRS)

    Gupta, K. K.

    1986-01-01

    The paper presents the descriptions of recently developed numerical algorithms that prove to be useful for the solution of the free vibration problem of spinning structures. First, a generalized procedure for the computation of nodal centrifugal forces in a finite element owing to any specified spin rate is derived in detail. This is followed by a description of an improved eigenproblem solution procedure that proves to be economical for the free vibration analysis of spinning structures. Numerical results are also presented which indicate the efficacy of the currently developed procedures.

  16. Environmental Test Screening Procedure

    NASA Technical Reports Server (NTRS)

    Zeidler, Janet

    2000-01-01

    This procedure describes the methods to be used for environmental stress screening (ESS) of the Lightning Mapper Sensor (LMS) lens assembly. Unless otherwise specified, the procedures shall be completed in the order listed, prior to performance of the Acceptance Test Procedure (ATP). The first unit, S/N 001, will be subjected to the Qualification Vibration Levels, while the remainder will be tested at the Operational Level. Prior to ESS, all units will undergo Pre-ESS Functional Testing that includes measuring the on-axis and plus or minus 0.95 full field Modulation Transfer Function and Back Focal Length. Next, all units will undergo ESS testing, and then Acceptance testing per PR 460.

  17. Reasoning about procedural knowledge

    NASA Technical Reports Server (NTRS)

    Georgeff, M. P.

    1985-01-01

    A crucial aspect of automated reasoning about space operations is that knowledge of the problem domain is often procedural in nature - that is, the knowledge is often in the form of sequences of actions or procedures for achieving given goals or reacting to certain situations. In this paper a system is described that explicitly represents and reasons about procedural knowledge. The knowledge representation used is sufficiently rich to describe the effects of arbitrary sequences of tests and actions, and the inference mechanism provides a means for directly using this knowledge to reach desired operational goals. Furthermore, the representation has a declarative semantics that provides for incremental changes to the system, rich explanatory capabilities, and verifiability. The approach also provides a mechanism for reasoning about the use of this knowledge, thus enabling the system to choose effectively between alternative courses of action.

  18. PROCESS OF ELIMINATING HYDROGEN PEROXIDE IN SOLUTIONS CONTAINING PLUTONIUM VALUES

    DOEpatents

    Barrick, J.G.; Fries, B.A.

    1960-09-27

    A procedure is given for peroxide precipitation processes for separating and recovering plutonium values contained in an aqueous solution. When plutonium peroxide is precipitated from an aqueous solution, the supernatant contains appreciable quantities of plutonium and peroxide. It is desirable to process this solution further to recover plutonium contained therein, but the presence of the peroxide introduces difficulties; residual hydrogen peroxide contained in the supernatant solution is eliminated by adding a nitrite or a sulfite to this solution.

  19. The separation procedure.

    PubMed

    Kiely, Edward M; Spitz, Lewis

    2015-10-01

    The various stages of the separation are carefully planned but despite this, variations which will change the schedule of the procedure may exist. In general the operation commences on the opposite side from the main procedure and then the twins are turned for the remainder of the operation. Each type of conjoined twin is different but basically thoracopagus involves the hearts, omphalopagus involves the liver and small intestine and ischiopagus involves the large intestine and genito-urinary system. Our results are presented together with interesting cases from which lessons have been learned. PMID:26382263

  20. The Paperless Solution

    NASA Technical Reports Server (NTRS)

    2001-01-01

    REI Systems, Inc. developed a software solution that uses the Internet to eliminate the paperwork typically required to document and manage complex business processes. The data management solution, called Electronic Handbooks (EHBs), is presently used for the entire SBIR program processes at NASA. The EHB-based system is ideal for programs and projects whose users are geographically distributed and are involved in complex management processes and procedures. EHBs provide flexible access control and increased communications while maintaining security for systems of all sizes. Through Internet Protocol- based access, user authentication and user-based access restrictions, role-based access control, and encryption/decryption, EHBs provide the level of security required for confidential data transfer. EHBs contain electronic forms and menus, which can be used in real time to execute the described processes. EHBs use standard word processors that generate ASCII HTML code to set up electronic forms that are viewed within a web browser. EHBs require no end-user software distribution, significantly reducing operating costs. Each interactive handbook simulates a hard-copy version containing chapters with descriptions of participants' roles in the online process.

  1. Toddler test or procedure preparation

    MedlinePlus

    Preparing toddler for test/procedure; Test/procedure preparation - toddler; Preparing for a medical test or procedure - toddler ... Before the test, know that your child will probably cry. Even if you prepare, your child may feel some discomfort or ...

  2. Preschooler test or procedure preparation

    MedlinePlus

    Preparing preschoolers for test/procedure; Test/procedure preparation - preschooler ... Preparing children for medical tests can reduce their distress. It can also make them less likely to cry and resist the procedure. Research shows that ...

  3. Attractor mechanism as a distillation procedure

    SciTech Connect

    Levay, Peter; Szalay, Szilard

    2010-07-15

    In a recent paper it was shown that for double extremal static spherical symmetric BPS black hole solutions in the STU model the well-known process of moduli stabilization at the horizon can be recast in a form of a distillation procedure of a three-qubit entangled state of a Greenberger-Horne-Zeilinger type. By studying the full flow in moduli space in this paper we investigate this distillation procedure in more detail. We introduce a three-qubit state with amplitudes depending on the conserved charges, the warp factor, and the moduli. We show that for the recently discovered non-BPS solutions it is possible to see how the distillation procedure unfolds itself as we approach the horizon. For the non-BPS seed solutions at the asymptotically Minkowski region we are starting with a three-qubit state having seven nonequal nonvanishing amplitudes and finally at the horizon we get a Greenberger-Horne-Zeilinger state with merely four nonvanishing ones with equal magnitudes. The magnitude of the surviving nonvanishing amplitudes is proportional to the macroscopic black hole entropy. A systematic study of such attractor states shows that their properties reflect the structure of the fake superpotential. We also demonstrate that when starting with the very special values for the moduli corresponding to flat directions the uniform structure at the horizon deteriorates due to errors generalizing the usual bit flips acting on the qubits of the attractor states.

  4. Common Dermatologic Procedures.

    PubMed

    Yang, Shelley; Kampp, Jeremy

    2015-11-01

    Dermatologists perform a wide variety of procedures on a daily basis. The skin biopsy is a fundamental technique that can be performed by all physicians who manage cutaneous conditions. Specimens should always be sent for pathologic evaluation, regardless of whether the sampled lesion appears benign. Postoperative care and education are critical for minimizing complications. PMID:26476254

  5. Parliamentary Procedure Made Easy.

    ERIC Educational Resources Information Center

    Hayden, Ellen T.

    Based on the newly revised "Robert's Rules of Order," these self-contained learning activities will help students successfully and actively participate in school, social, civic, political, or professional organizations. There are 13 lessons. Topics studied include the what, why, and history of parliamentary procedure; characteristics of the ideal…

  6. Simulating Laboratory Procedures.

    ERIC Educational Resources Information Center

    Baker, J. E.; And Others

    1986-01-01

    Describes the use of computer assisted instruction in a medical microbiology course. Presents examples of how computer assisted instruction can present case histories in which the laboratory procedures are simulated. Discusses an authoring system used to prepare computer simulations and provides one example of a case history dealing with fractured…

  7. Procedures of Mind.

    ERIC Educational Resources Information Center

    Kolers, Paul A.; Roediger, Henry L.

    1984-01-01

    Presents a "procedural view" of the learning mind, arguing against previous theories citing physical properties as its basis. A more process-oriented view of information processing is offered, which describes "mind" in terms of skill in manipulating symbols, and the notion of skills is shown to provide a useful framework for accounting for…

  8. Procedures and Policies Manual

    ERIC Educational Resources Information Center

    Davis, Jane M.

    2006-01-01

    This document was developed by the Middle Tennessee State University James E. Walker Library Collection Management Department to provide policies and procedural guidelines for the cataloging and processing of bibliographic materials. This document includes policies for cataloging monographs, serials, government documents, machine-readable data…

  9. PLATO Courseware Development Procedures.

    ERIC Educational Resources Information Center

    Mahler, William A.; And Others

    This is an exploratory study of methods for the preparation of computer curriculum materials. It deals with courseware development procedures for the PLATO IV computer-based education system, and draws on interviews with over 100 persons engaged in courseware production. The report presents a five stage model of development: (1) planning, (2)…

  10. Office Procedures Curriculum Guidelines.

    ERIC Educational Resources Information Center

    Washington Office of the State Superintendent of Public Instruction, Olympia. Div. of Vocational-Technical and Adult Education Services.

    This guideline is intended as a resource for instructors who are teaching an office procedures course. This course offers closure for all students completing a scope and sequence in the business education program--accounting, secretarial, office services, and related areas. The stated purpose of the course is to prepare a secondary learner for…

  11. Educational Accounting Procedures.

    ERIC Educational Resources Information Center

    Tidwell, Sam B.

    This chapter of "Principles of School Business Management" reviews the functions, procedures, and reports with which school business officials must be familiar in order to interpret and make decisions regarding the school district's financial position. Among the accounting functions discussed are financial management, internal auditing, annual…

  12. Visual Screening: A Procedure.

    ERIC Educational Resources Information Center

    Williams, Robert T.

    Vision is a complex process involving three phases: physical (acuity), physiological (integrative), and psychological (perceptual). Although these phases cannot be considered discrete, they provide the basis for the visual screening procedure used by the Reading Services of Colorado State University and described in this document. Ten tests are…

  13. Pediatric Procedural Pain

    ERIC Educational Resources Information Center

    Blount, Ronald L.; Piira, Tiina; Cohen, Lindsey L.; Cheng, Patricia S.

    2006-01-01

    This article reviews the various settings in which infants, children, and adolescents experience pain during acute medical procedures and issues related to referral of children to pain management teams. In addition, self-report, reports by others, physiological monitoring, and direct observation methods of assessment of pain and related constructs…

  14. Student Loan Collection Procedures.

    ERIC Educational Resources Information Center

    National Association of College and University Business Officers, Washington, DC.

    This manual on the collection of student loans is intended for the use of business officers and loan collection personnel of colleges and universities of all sizes. The introductory chapter is an overview of sound collection practices and procedures. It discusses the making of a loan, in-school servicing of the accounts, the exit interview, the…

  15. Grievance Procedure Problems.

    ERIC Educational Resources Information Center

    Green, Gary J.

    This paper presents two actual problems involving grievance procedures. Both problems involve pending litigation and one of them involves pending arbitration. The first problem occurred in a wealthy Minnesota school district and involved a seniority list. Because of changes in the financial basis for supporting public schools, it became necessary…

  16. Special Education: Procedural Guide.

    ERIC Educational Resources Information Center

    Dependents Schools (DOD), Washington, DC.

    The guide is intended to provide information to administrators and regional and local case study committees on special education procedures within Department of Defense Dependents Schools (DoDDS). The manual addresses a step-by step approach from referral to the implementation of individualized education programs (IEP). The following topics are…

  17. 46 CFR 153.1035 - Acetone cyanohydrin or lactonitrile solutions.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Acetone cyanohydrin or lactonitrile solutions. 153.1035... Special Cargo Procedures § 153.1035 Acetone cyanohydrin or lactonitrile solutions. No person may operate a tankship carrying a cargo of acetone cyanohydrin or lactonitrile solutions, unless that cargo is...

  18. 46 CFR 153.1035 - Acetone cyanohydrin or lactonitrile solutions.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Acetone cyanohydrin or lactonitrile solutions. 153.1035... Special Cargo Procedures § 153.1035 Acetone cyanohydrin or lactonitrile solutions. No person may operate a tankship carrying a cargo of acetone cyanohydrin or lactonitrile solutions, unless that cargo is...

  19. 46 CFR 153.1035 - Acetone cyanohydrin or lactonitrile solutions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Acetone cyanohydrin or lactonitrile solutions. 153.1035... Special Cargo Procedures § 153.1035 Acetone cyanohydrin or lactonitrile solutions. No person may operate a tankship carrying a cargo of acetone cyanohydrin or lactonitrile solutions, unless that cargo is...

  20. Favorite Demonstrations: Exothermic Crystallization from a Supersaturated Solution.

    ERIC Educational Resources Information Center

    Kauffman, George B.; And Others

    1986-01-01

    The use of sodium acetate solution to show supersaturation is a favorite among lecture demonstrations. However, careful adjustment of the solute-to-water ratio must be made to attain the most spectacular effect--complete solidification of the solution. Procedures to accomplish this are provided and discussed. (JN)

  1. 46 CFR 153.1035 - Acetone cyanohydrin or lactonitrile solutions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Acetone cyanohydrin or lactonitrile solutions. 153.1035... Special Cargo Procedures § 153.1035 Acetone cyanohydrin or lactonitrile solutions. No person may operate a tankship carrying a cargo of acetone cyanohydrin or lactonitrile solutions, unless that cargo is...

  2. 46 CFR 153.1035 - Acetone cyanohydrin or lactonitrile solutions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Acetone cyanohydrin or lactonitrile solutions. 153.1035... Special Cargo Procedures § 153.1035 Acetone cyanohydrin or lactonitrile solutions. No person may operate a tankship carrying a cargo of acetone cyanohydrin or lactonitrile solutions, unless that cargo is...

  3. 46 CFR 153.1065 - Sodium chlorate solutions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Sodium chlorate solutions. 153.1065 Section 153.1065... Procedures § 153.1065 Sodium chlorate solutions. (a) No person may load sodium chlorate solutions into a... before loading. (b) The person in charge of cargo transfer shall make sure that spills of sodium...

  4. 46 CFR 153.1065 - Sodium chlorate solutions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Sodium chlorate solutions. 153.1065 Section 153.1065... Procedures § 153.1065 Sodium chlorate solutions. (a) No person may load sodium chlorate solutions into a... before loading. (b) The person in charge of cargo transfer shall make sure that spills of sodium...

  5. Procedural Quantum Programming

    NASA Astrophysics Data System (ADS)

    Ömer, Bernhard

    2002-09-01

    While classical computing science has developed a variety of methods and programming languages around the concept of the universal computer, the typical description of quantum algorithms still uses a purely mathematical, non-constructive formalism which makes no difference between a hydrogen atom and a quantum computer. This paper investigates, how the concept of procedural programming languages, the most widely used classical formalism for describing and implementing algorithms, can be adopted to the field of quantum computing, and how non-classical features like the reversibility of unitary transformations, the non-observability of quantum states or the lack of copy and erase operations can be reflected semantically. It introduces the key concepts of procedural quantum programming (hybrid target architecture, operator hierarchy, quantum data types, memory management, etc.) and presents the experimental language QCL, which implements these principles.

  6. Standards of neurosurgical procedures.

    PubMed

    Steiger, H J

    2001-01-01

    Written specifications with regard to procedures performed, equipment used, and training of the involved personnel are widely used in the industry and aviation to guarantee constant quality. Similar systems are progressively being introduced to medicine. We have made an effort to standardize surgical procedures by introducing step-by-step guidelines and checklists. The current experience shows that a system of written standards is applicable to neurosurgery and that the use of checklists contributes to the prevention of forgetting essential details. Written standards and checklists are also a useful training tool within a university hospital and facilitate communication of essentials to the residents. Comparison with aviation suggests that standardization leads to a remarkable but nonetheless limited reduction of adverse incidents. PMID:11840739

  7. Automatic beamline calibration procedures

    SciTech Connect

    Corbett, W.J.; Lee, M.J.; Zambre, Y.

    1992-03-01

    Recent experience with the SLC and SPEAR accelerators have led to a well-defined set of procedures for calibration of the beamline model using the orbit fitting program, RESOLVE. Difference orbit analysis is used to calibrate quadrupole strengths, BPM sensitivities, corrector strengths, focusing effects from insertion devices, and to determine the source of dispersion and coupling errors. Absolute orbit analysis is used to locate quadrupole misalignments, BPM offsets, or beam loss. For light source applications, the photon beam source coordinates can be found. The result is an accurate model of the accelerator which can be used for machine control. In this paper, automatable beamline calibration procedures are outlined and illustrated with recent examples. 5 refs.

  8. Hard tissue laser procedures.

    PubMed

    Gimbel, C B

    2000-10-01

    A more conservative, less invasive treatment of the carious lesion has intrigued researchers and clinicians for decades. With over 170 million restorations placed worldwide each year, many of which could be treated using a laser, there exists an increasing need for understanding hard tissue laser procedures. An historical review of past scientific and clinical hard research, biophysics, and histology are discussed. A complete review of present applications and procedures along with their capabilities and limitations will give the clinician a better understanding. Clinical case studies, along with guidelines for tooth preparation and hard tissue laser applications and technological advances for diagnosis and treatment will give the clinician a look into the future. PMID:11048281

  9. Practical procedures: oxygen therapy.

    PubMed

    Olive, Sandra

    Knowing when to start patients on oxygen therapy can save lives, but ongoing assessment and evaluation must be carried out to ensure the treatment is safe and effective. This article outlines when oxygen therapy should be used and the procedures to follow. It also describes the delivery methods applicable to different patient groups, along with the appropriate target saturation ranges, and details relevant nurse competencies. PMID:26901946

  10. Musculoskeletal Aspiration Procedures

    PubMed Central

    Hansford, Barry Glenn; Stacy, Gregory Scott

    2012-01-01

    With advances in imaging technology, there has been a significant increase in the number and range of interventional musculoskeletal image-guided procedures. One of the most commonly performed image-guided musculoskeletal interventions is the diagnostic and therapeutic percutaneous aspiration and drainage of multiple types of intra-articular, juxta-articular, and intramuscular pathologic fluid collections. These procedures may be performed under fluoroscopic, ultrasound, computed tomography, or even magnetic resonance guidance depending on the location to be accessed, type of pathology, patient characteristics, and operator preference. Musculoskeletal image-guided aspiration and drainage procedures are minimally invasive and generally very safe while offering valuable diagnostic information as well as therapeutic benefit. This article focuses on the appropriate indications, contraindications, and general technique for accessing the major joints via imaging guidance. For each joint, we discuss pertinent anatomy, appropriate imaging modalities, and preferred approaches to gaining intra-articular access. Additionally, the article discusses some of the more frequently encountered juxta-articular and intramuscular fluid collections that can be accessed and aspirated via percutaneous intervention, with mention of the importance of recognizing extremity sarcomas that can mimic these benign collections. PMID:24293800

  11. Mathematically optimized cryoprotectant equilibration procedures for cryopreservation of human oocytes

    PubMed Central

    2014-01-01

    Background Simple and effective cryopreservation of human oocytes would have an enormous impact on the financial and ethical constraints of human assisted reproduction. Recently, studies have demonstrated the potential for cryopreservation in an ice-free glassy state by equilibrating oocytes with high concentrations of cryoprotectants (CPAs) and rapidly cooling to liquid nitrogen temperatures. A major difficulty with this approach is that the high concentrations required for the avoidance of crystal formation (vitrification) also increase the risk of osmotic and toxic damage. We recently described a mathematical optimization approach for designing CPA equilibration procedures that avoid osmotic damage and minimize toxicity, and we presented optimized procedures for human oocytes involving continuous changes in solution composition. Methods Here we adapt and refine our previous algorithm to predict piecewise-constant changes in extracellular solution concentrations in order to make the predicted procedures easier to implement. Importantly, we investigate the effects of using alternate equilibration endpoints on predicted protocol toxicity. Finally, we compare the resulting procedures to previously described experimental methods, as well as mathematically optimized procedures involving continuous changes in solution composition. Results For equilibration with CPA, our algorithm predicts an optimal first step consisting of exposure to a solution containing only water and CPA. This is predicted to cause the cells to initially shrink and then swell to the maximum cell volume limit. To reach the target intracellular CPA concentration, the cells are then induced to shrink to the minimum cell volume limit by exposure to a high CPA concentration. For post-thaw equilibration to remove CPA, the optimal procedures involve exposure to CPA-free solutions that are predicted to cause swelling to the maximum volume limit. The toxicity associated with these procedures is predicted

  12. Thermodynamics of Dilute Solutions.

    ERIC Educational Resources Information Center

    Jancso, Gabor; Fenby, David V.

    1983-01-01

    Discusses principles and definitions related to the thermodynamics of dilute solutions. Topics considered include dilute solution, Gibbs-Duhem equation, reference systems (pure gases and gaseous mixtures, liquid mixtures, dilute solutions), real dilute solutions (focusing on solute and solvent), terminology, standard states, and reference systems.…

  13. Augmented reality in surgical procedures

    NASA Astrophysics Data System (ADS)

    Samset, E.; Schmalstieg, D.; Vander Sloten, J.; Freudenthal, A.; Declerck, J.; Casciaro, S.; Rideng, Ø.; Gersak, B.

    2008-02-01

    Minimally invasive therapy (MIT) is one of the most important trends in modern medicine. It includes a wide range of therapies in videoscopic surgery and interventional radiology and is performed through small incisions. It reduces hospital stay-time by allowing faster recovery and offers substantially improved cost-effectiveness for the hospital and the society. However, the introduction of MIT has also led to new problems. The manipulation of structures within the body through small incisions reduces dexterity and tactile feedback. It requires a different approach than conventional surgical procedures, since eye-hand co-ordination is not based on direct vision, but more predominantly on image guidance via endoscopes or radiological imaging modalities. ARIS*ER is a multidisciplinary consortium developing a new generation of decision support tools for MIT by augmenting visual and sensorial feedback. We will present tools based on novel concepts in visualization, robotics and haptics providing tailored solutions for a range of clinical applications. Examples from radio-frequency ablation of liver-tumors, laparoscopic liver surgery and minimally invasive cardiac surgery will be presented. Demonstrators were developed with the aim to provide a seamless workflow for the clinical user conducting image-guided therapy.

  14. Interventional radiology neck procedures.

    PubMed

    Zabala Landa, R M; Korta Gómez, I; Del Cura Rodríguez, J L

    2016-05-01

    Ultrasonography has become extremely useful in the evaluation of masses in the head and neck. It enables us to determine the anatomic location of the masses as well as the characteristics of the tissues that compose them, thus making it possible to orient the differential diagnosis toward inflammatory, neoplastic, congenital, traumatic, or vascular lesions, although it is necessary to use computed tomography or magnetic resonance imaging to determine the complete extension of certain lesions. The growing range of interventional procedures, mostly guided by ultrasonography, now includes biopsies, drainages, infiltrations, sclerosing treatments, and tumor ablation. PMID:27138033

  15. Radiometric correction procedure study

    NASA Technical Reports Server (NTRS)

    Colby, C.; Sands, R.; Murphrey, S.

    1978-01-01

    A comparison of MSS radiometric processing techniques identified as a preferred radiometric processing technique a procedure which equalizes the mean and standard deviation of detector-specific histograms of uncalibrated scene data. Evaluation of MSS calibration data demonstrated that the relationship between detector responses is essentially linear over the range of intensities typically observed in MSS data, and that the calibration wedge data possess a high degree of temporal stability. An analysis of the preferred radiometric processing technique showed that it could be incorporated into the MDP-MSS system without a major redesign of the system, and with minimal impact on system throughput.

  16. Surface cleanliness measurement procedure

    DOEpatents

    Schroder, Mark Stewart; Woodmansee, Donald Ernest; Beadie, Douglas Frank

    2002-01-01

    A procedure and tools for quantifying surface cleanliness are described. Cleanliness of a target surface is quantified by wiping a prescribed area of the surface with a flexible, bright white cloth swatch, preferably mounted on a special tool. The cloth picks up a substantial amount of any particulate surface contamination. The amount of contamination is determined by measuring the reflectivity loss of the cloth before and after wiping on the contaminated system and comparing that loss to a previous calibration with similar contamination. In the alternative, a visual comparison of the contaminated cloth to a contamination key provides an indication of the surface cleanliness.

  17. Optimality criteria solution strategies in multiple constraint design optimization

    NASA Technical Reports Server (NTRS)

    Levy, R.; Parzynski, W.

    1981-01-01

    Procedures and solution strategies are described to solve the conventional structural optimization problem using the Lagrange multiplier technique. The multipliers, obtained through solution of an auxiliary nonlinear optimization problem, lead to optimality criteria to determine the design variables. It is shown that this procedure is essentially equivalent to an alternative formulation using a dual method Lagrangian function objective. Although mathematical formulations are straight-forward, successful applications and computational efficiency depend upon execution procedure strategies. Strategies examined, with application examples, include selection of active constraints, move limits, line search procedures, and side constraint boundaries.

  18. 76 FR 78015 - Revised Analysis and Mapping Procedures for Non-Accredited Levees

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-15

    ... SECURITY Federal Emergency Management Agency Revised Analysis and Mapping Procedures for Non-Accredited... Management Agency (FEMA) is accepting comments on the proposed solution for Revised Analysis and Mapping Procedures for Non-Accredited Levees. This document proposes a revised procedure for the analysis and...

  19. Advanced crew procedures development techniques: Procedures and performance program description

    NASA Technical Reports Server (NTRS)

    Arbet, J. D.; Mangiaracina, A. A.

    1975-01-01

    The Procedures and Performance Program (PPP) for operation in conjunction with the Shuttle Procedures Simulator (SPS) is described. The PPP user interface, the SPS/PPP interface, and the PPP applications software are discussed.

  20. Interventional spinal procedures.

    PubMed

    Andreula, Cosma; Muto, Mario; Leonardi, Marco

    2004-05-01

    The interventional procedures for disk herniation and protrusion by percutaneous techniques are decompressive such as chemodiscolysis with chimopapain, nucleo-discectomy introduced by Onik, LASER discectomy, and recently nucleoplasty, and decompressive and direct antinflammatory such as chemiodiscolysis with an Oxygen-ozone mixture. These techniques have minimized the invasive nature of surgery and avoid or decrease complications like infection linked to surgery. Reducing intervertebral disc size by mechanical aspiration of a part of the disc or partially dissolving the herniation by drying reduces the conic pressure on the torn annulus and creates the space necessary for retropulsion whenever the circular fibres of the annulus regain a minimum capacity to contain the disc under tension. The proposed suggestion in these techniques is that a small change in volume produces large change in pressure. The success rates reported in different studies vary from 65 to 80% of excellent or good results with chemonucleolysis and aspiration. Vertebroplasty (VP) is done by percutaneous injection of acrylic cement (polymethylmetacrylate-PMMA) into the vertebrae under fluoroscopic and/or CT control to achieve an antalgic effect and stabilize the vertebral body. VP has been used for vertebral collapses caused by osteoporosis, long-term steroid treatment, aggressive symptomatic angiomas and lytic metastasis. The reported figures in literature are 80-95% of pain relief, within 7 days after procedure, commonly on the same day. PMID:15081127

  1. Designing Flight Deck Procedures

    NASA Technical Reports Server (NTRS)

    Degani, Asaf; Wiener, Earl

    2005-01-01

    Three reports address the design of flight-deck procedures and various aspects of human interaction with cockpit systems that have direct impact on flight safety. One report, On the Typography of Flight- Deck Documentation, discusses basic research about typography and the kind of information needed by designers of flight deck documentation. Flight crews reading poorly designed documentation may easily overlook a crucial item on the checklist. The report surveys and summarizes the available literature regarding the design and typographical aspects of printed material. It focuses on typographical factors such as proper typefaces, character height, use of lower- and upper-case characters, line length, and spacing. Graphical aspects such as layout, color coding, fonts, and character contrast are discussed; and several cockpit conditions such as lighting levels and glare are addressed, as well as usage factors such as angular alignment, paper quality, and colors. Most of the insights and recommendations discussed in this report are transferable to paperless cockpit systems of the future and computer-based procedure displays (e.g., "electronic flight bag") in aerospace systems and similar systems that are used in other industries such as medical, nuclear systems, maritime operations, and military systems.

  2. A time efficient finite differences algorithm for the solution of the meridional flow in turbo compressor impellers

    NASA Astrophysics Data System (ADS)

    Reitman, L.; Wolfshtein, M.; Adler, D.

    1982-11-01

    A finite difference method is developed for solving the non-viscous formulation of a three-dimensional compressible flow problem for turbomachinery impellers. The numerical results and the time efficiency of this method are compared to that provided by a finite element method for this problem. The finite difference method utilizes a numerical, curvilinear, and non-orthogonal coordinate transformation and the ADI scheme. The finite difference method is utilized to solve a test problem of a centrifugal compressor impeller. It is shown that the finite difference method produces results in good agreement with the experimentally determined flow fields and is as accurate as the finite element technique. However, the finite difference method only requires about half the time in order to obtain the solution for this problem as that required by the finite element method.

  3. Surgical Procedures for Vestibular Dysfunction

    MedlinePlus

    ... Rated Nonprofit! Volunteer. Donate. Review. Surgical Procedures for Vestibular Dysfunction When is surgery necessary? When medical treatment ... organ (cochlea) is also sacrificed with this procedure. Vestibular nerve section A vestibular nerve section is a ...

  4. General procedure for gaging streams

    USGS Publications Warehouse

    Carter, R.W.; Davidian, Jacob

    1968-01-01

    This chapter briefly describes the objectives and procedures used in obtaining streamflow records. It is considered an introduction to other chapters on surface-water techniques which treat individual procedures in greater detail.

  5. Standards and procedures for INTERACT

    SciTech Connect

    Bonnet, J.M.

    1981-01-01

    There is presented a checklist of items that writers of execute procedures should consider when developing procedures for public use or exchange among INTERACT user sites. An example using the checklist is also given. 4 figures.

  6. A conjugate heat transfer procedure for gas turbine blades.

    PubMed

    Croce, G

    2001-05-01

    A conjugate heat transfer procedure, allowing for the use of different solvers on the solid and fluid domain(s), is presented. Information exchange between solid and fluid solution is limited to boundary condition values, and this exchange is carried out at any pseudo-time step. Global convergence rate of the procedure is, thus, of the same order of magnitude of stand-alone computations. PMID:11460637

  7. An Efficient Microscale Procedure for the Synthesis of Aspirin

    NASA Astrophysics Data System (ADS)

    Pandita, Sangeeta; Goyal, Samta

    1998-06-01

    The synthesis of aspirin is a part of many undergraduate organic synthesis labs and is frequently used in qualitative organic analysis laboratory for the identification of salicylic acid. We have found that aspirin can be synthesized on microscale by a simple and efficient procedure that eliminates the heating step employed in literature procedures and gives a pure, ferric-negative product (no purple color with alcoholic ferric chloride solution).

  8. Finite element solutions of free surface flows

    NASA Technical Reports Server (NTRS)

    Zarda, P. R.; Marcus, M. S.

    1977-01-01

    A procedure is presented for using NASTRAN to determine the flow field about arbitrarily shaped bodies in the presence of a free surface. The fundamental unknown of the problem is the velocity potential which must satisfy Laplace's equation in the fluid region. Boundary conditions on the free surface may involve second order derivatives in space and time. In cases involving infinite domains either a tractable radiation condition is applied at a truncated boundary or a series expansion is used and matched to the local finite elements. Solutions are presented for harmonic, transient, and steady state problems and compared to either exact solutions or other numerical solutions.

  9. MECHANIZATION OF CATALOGING PROCEDURES.

    PubMed

    KILGOUR, F G

    1965-04-01

    The Columbia-Harvard-Yale Medical Libraries Computerization Project has put into operation its mechanized procedure for the production of catalog cards. Cards produced are in final form ready to be filed into a card catalog. Catalogers prepare copy on a worksheet from which punched cards are punched. An IBM 1401 computer processes the decklets of punched cards on magnetic tape to produce the expanded decklets of punched cards needed to print the various packs of catalog cards required to go into different catalogs. Next, the computer punches the expanded decklets of cards to operate an 870 Document Writer, which types out the catalog cards in final form. Cost of cards ready to file is 12.5 cents per card. PMID:14271110

  10. Perfusion techniques for minimally invasive valve procedures.

    PubMed

    de Jong, A; Popa, B A; Stelian, E; Karazanishvili, L; Lanzillo, G; Simonini, S; Renzi, L; Diena, M; Tesler, U F

    2015-05-01

    In this paper, we present, in detail, the simplified perfusion technique that we have adopted since January 2009 and that we have utilized in 200 cases for cardiac minimally invasive valvular procedures that were performed through a right lateral mini-thoracotomy in the 3(rd)-4(th) intercostal space. Cardiopulmonary bypass was achieved by means of the direct cannulation of the ascending aorta and the insertion of a percutaneous venous cannula in the femoral vein. A flexible aortic cross-clamp was applied through the skin incision and cardioplegic arrest was obtained with the antegrade delivery of a crystalloid solution. Gravity drainage was enhanced by vacuum-assisted aspiration. There were no technical complications related to this perfusion technique that we have adopted in minimally invasive surgical procedures. PMID:25280878

  11. Surfing Global Change: Negotiating Sustainable Solutions

    ERIC Educational Resources Information Center

    Ahamer, Gilbert

    2006-01-01

    SURFING GLOBAL CHANGE (SGC) serves as a procedural shell for attaining sustainable solutions for any interdisciplinary issue and is intended for use in advanced university courses. The participants' activities evolve through five levels from individual argumentation to molding one's own views for the "common good." The paradigm of "ethics of…

  12. Nursing Procedures. NAVMED P-5066.

    ERIC Educational Resources Information Center

    Bureau of Medicine and Surgery (Navy), Washington, DC.

    The revised manual of nursing procedures covers fundamental nursing care, admission and discharge of the patient, assisting with therapeutic measures, pre- and postoperative care, diagnostic tests and procedures, and isolation technique. Each of the over 300 topics includes the purpose, equipment, and procedure to be used and, where relevant, such…

  13. Policy and Procedures Manual. Revised.

    ERIC Educational Resources Information Center

    Mississippi State Board for Community and Junior Colleges, Jackson.

    The Mississippi State Board for Community and Junior College Policy and Procedures Manual has been established by the State Board to govern its actions and activities and those of the staff. It describes polices and procedures regarding board operations, staff employment, staff workplace, employee performance/grievance procedure, staff positions,…

  14. Group Syntality and Parliamentary Procedure.

    ERIC Educational Resources Information Center

    Winn, Larry James; Kell, Carl L.

    The group syntality concept of Raymond B. Cattell furnishes a useful framework for teaching parliamentary procedure. Although there are contrasts between the histories, subject matters, and perspectives of the areas of parliamentary procedure and group dynamics, teachers and students of parliamentary procedure might profitably draw from some of…

  15. Thermodynamics and Kinetics of Chemical Equilibrium in Solution.

    ERIC Educational Resources Information Center

    Leenson, I. A.

    1986-01-01

    Discusses theory of thermodynamics of the equilibrium in solution and dissociation-dimerization kinetics. Describes experimental procedure including determination of molar absorptivity and equilibrium constant, reaction enthalpy, and kinetics of the dissociation-dimerization reaction. (JM)

  16. Kinetics of the Fading of Phenolphthalein in Alkaline Solution.

    ERIC Educational Resources Information Center

    Nicholson, Lois

    1989-01-01

    Described is an experiment which illustrates pseudo-first-order kinetics in the fading of a common indicator in an alkaline solution. Included are background information, details of materials used, laboratory procedures, and sample results. (CW)

  17. Automation of procedure writing for the RLWTF

    SciTech Connect

    Farnham, M. |; MacDonald, A. |

    1998-12-01

    In August of 1997, the Radioactive Liquid Waste Treatment Facility (RLWTF) at Los Alamos National Laboratory (LANL) recognized the need to re-engineer document management business process. All nuclear facilities at LANL are required to ensure that both the latest approved revision of controlled documents and any changes to those documents are available to operating personnel at all times. The Nuclear Materials Technology (NMT) Division was also re-engineering its document management business processes and searching for a solution. Both groups contacted several internal and external organizations in search of potential software solutions in use that would meet requirements. This report describes the objectives and features required by the software package, the choice of Procedure Design as the software package, and its implementation.

  18. Advanced crew procedures development techniques

    NASA Technical Reports Server (NTRS)

    Arbet, J. D.; Benbow, R. L.; Mangiaracina, A. A.; Mcgavern, J. L.; Spangler, M. C.; Tatum, I. C.

    1975-01-01

    The development of an operational computer program, the Procedures and Performance Program (PPP), is reported which provides a procedures recording and crew/vehicle performance monitoring capability. The PPP provides real time CRT displays and postrun hardcopy of procedures, difference procedures, performance, performance evaluation, and training script/training status data. During post-run, the program is designed to support evaluation through the reconstruction of displays to any point in time. A permanent record of the simulation exercise can be obtained via hardcopy output of the display data, and via magnetic tape transfer to the Generalized Documentation Processor (GDP). Reference procedures data may be transferred from the GDP to the PPP.

  19. [Neural basis of procedural memory].

    PubMed

    Mochizuki-Kawai, Hiroko

    2008-07-01

    Procedural memory is acquired by trial and error. Our daily life is supported by a number of procedural memories such as those for riding bicycle, typing, reading words, etc. Procedural memory is divided into 3 types; motor, perceptual, and cognitive. Here, the author reviews the cognitive and neural basis of procedural memory according to these 3 types. It is reported that the basal ganglia or cerebellum dysfunction causes deficits in procedural memory. Compared with age-matched healthy participants, patients with Parkinson disease (PD), Huntington disease (HD) or spinocerebellar degeneration (SCD) show deterioration in improvements in motor-type procedural memory tasks. Previous neuroimaging studies have reported that motor-type procedural memory may be supported by multiple brain regions, including the frontal and parietal regions as well as the basal ganglia (cerebellum); this was found with a serial reaction time task (SRT task). Although 2 other types of procedural memory are also maintained by multiple brain regions, the related cerebral areas depend on the type of memory. For example, it was suggested that acquisition of the perceptual type of procedural memory (e.g., ability to read mirror images of words) might be maintained by the bilateral fusiform region, while the acquisition of cognitive procedural memory might be supported by the frontal, parietal, or cerebellar regions as well as the basal ganglia. In the future, we need to cleary understand the neural "network" related to the procedural memory. PMID:18646622

  20. NASA trend analysis procedures

    NASA Technical Reports Server (NTRS)

    1993-01-01

    This publication is primarily intended for use by NASA personnel engaged in managing or implementing trend analysis programs. 'Trend analysis' refers to the observation of current activity in the context of the past in order to infer the expected level of future activity. NASA trend analysis was divided into 5 categories: problem, performance, supportability, programmatic, and reliability. Problem trend analysis uncovers multiple occurrences of historical hardware or software problems or failures in order to focus future corrective action. Performance trend analysis observes changing levels of real-time or historical flight vehicle performance parameters such as temperatures, pressures, and flow rates as compared to specification or 'safe' limits. Supportability trend analysis assesses the adequacy of the spaceflight logistics system; example indicators are repair-turn-around time and parts stockage levels. Programmatic trend analysis uses quantitative indicators to evaluate the 'health' of NASA programs of all types. Finally, reliability trend analysis attempts to evaluate the growth of system reliability based on a decreasing rate of occurrence of hardware problems over time. Procedures for conducting all five types of trend analysis are provided in this publication, prepared through the joint efforts of the NASA Trend Analysis Working Group.

  1. Transgenesis procedures in Xenopus

    PubMed Central

    Chesneau, Albert; Sachs, Laurent M.; Chai, Norin; Chen, Yonglong; Pasquier, Louis Du; Loeber, Jana; Pollet, Nicolas; Reilly, Michael; Weeks, Daniel L.; Bronchain, Odile J.

    2010-01-01

    Stable integration of foreign DNA into the frog genome has been the purpose of several studies aimed at generating transgenic animals or producing mutations of endogenous genes. Inserting DNA into a host genome can be achieved in a number of ways. In Xenopus, different strategies have been developed which exhibit specific molecular and technical features. Although several of these technologies were also applied in various model organizms, the attributes of each method have rarely been experimentally compared. Investigators are thus confronted with a difficult choice to discriminate which method would be best suited for their applications. To gain better understanding, a transgenesis workshop was organized by the X-omics consortium. Three procedures were assessed side-by-side, and the results obtained are used to illustrate this review. In addition, a number of reagents and tools have been set up for the purpose of gene expression and functional gene analyses. This not only improves the status of Xenopus as a powerful model for developmental studies, but also renders it suitable for sophisticated genetic approaches. Twenty years after the first reported transgenic Xenopus, we review the state of the art of transgenic research, focusing on the new perspectives in performing genetic studies in this species. PMID:18699776

  2. The procedure safety system

    NASA Technical Reports Server (NTRS)

    Obrien, Maureen E.

    1990-01-01

    Telerobotic operations, whether under autonomous or teleoperated control, require a much more sophisticated safety system than that needed for most industrial applications. Industrial robots generally perform very repetitive tasks in a controlled, static environment. The safety system in that case can be as simple as shutting down the robot if a human enters the work area, or even simply building a cage around the work space. Telerobotic operations, however, will take place in a dynamic, sometimes unpredictable environment, and will involve complicated and perhaps unrehearsed manipulations. This creates a much greater potential for damage to the robot or objects in its vicinity. The Procedural Safety System (PSS) collects data from external sensors and the robot, then processes it through an expert system shell to determine whether an unsafe condition or potential unsafe condition exists. Unsafe conditions could include exceeding velocity, acceleration, torque, or joint limits, imminent collision, exceeding temperature limits, and robot or sensor component failure. If a threat to safety exists, the operator is warned. If the threat is serious enough, the robot is halted. The PSS, therefore, uses expert system technology to enhance safety thus reducing operator work load, allowing him/her to focus on performing the task at hand without the distraction of worrying about violating safety criteria.

  3. Inflight IFR procedures simulator

    NASA Technical Reports Server (NTRS)

    Parker, L. C. (Inventor)

    1984-01-01

    An inflight IFR procedures simulator for generating signals and commands to conventional instruments provided in an airplane is described. The simulator includes a signal synthesizer which generates predetermined simulated signals corresponding to signals normally received from remote sources upon being activated. A computer is connected to the signal synthesizer and causes the signal synthesizer to produce simulated signals responsive to programs fed into the computer. A switching network is connected to the signal synthesizer, the antenna of the aircraft, and navigational instruments and communication devices for selectively connecting instruments and devices to the synthesizer and disconnecting the antenna from the navigational instruments and communication device. Pressure transducers are connected to the altimeter and speed indicator for supplying electrical signals to the computer indicating the altitude and speed of the aircraft. A compass is connected for supply electrical signals for the computer indicating the heading of the airplane. The computer upon receiving signals from the pressure transducer and compass, computes the signals that are fed to the signal synthesizer which, in turn, generates simulated navigational signals.

  4. Purification and concentration of DNA from aqueous solutions.

    PubMed

    Moore, D

    2001-05-01

    This unit presents basic procedures for manipulating solutions of single- or double-stranded DNA through purification and concentration steps. Phenol extraction with ethanol precipitation is described along with an alternate procedure of precipitating DNA with isopropanol. A Support Protocol describes concentration of DNA using butanol. PMID:18429080

  5. Constant curvature solutions of Grassmannian sigma models: (2) Non-holomorphic solutions

    NASA Astrophysics Data System (ADS)

    Delisle, L.; Hussin, V.; Zakrzewski, W. J.

    2013-09-01

    We generalize here our general procedure for constructing constant curvature maps of 2-spheres into Grassmannian manifolds G(m,n) this time concentrating our attention on maps which are non-holomorphic. We present some expressions describing these solutions in the general case and discuss how to use these results to construct solutions of constant curvature. We also discuss possible values of this constant curvature.

  6. MUSE optical alignment procedure

    NASA Astrophysics Data System (ADS)

    Laurent, Florence; Renault, Edgard; Loupias, Magali; Kosmalski, Johan; Anwand, Heiko; Bacon, Roland; Boudon, Didier; Caillier, Patrick; Daguisé, Eric; Dubois, Jean-Pierre; Dupuy, Christophe; Kelz, Andreas; Lizon, Jean-Louis; Nicklas, Harald; Parès, Laurent; Remillieux, Alban; Seifert, Walter; Valentin, Hervé; Xu, Wenli

    2012-09-01

    MUSE (Multi Unit Spectroscopic Explorer) is a second generation VLT integral field spectrograph (1x1arcmin² Field of View) developed for the European Southern Observatory (ESO), operating in the visible wavelength range (0.465-0.93 μm). A consortium of seven institutes is currently assembling and testing MUSE in the Integration Hall of the Observatoire de Lyon for the Preliminary Acceptance in Europe, scheduled for 2013. MUSE is composed of several subsystems which are under the responsibility of each institute. The Fore Optics derotates and anamorphoses the image at the focal plane. A Splitting and Relay Optics feed the 24 identical Integral Field Units (IFU), that are mounted within a large monolithic instrument mechanical structure. Each IFU incorporates an image slicer, a fully refractive spectrograph with VPH-grating and a detector system connected to a global vacuum and cryogenic system. During 2011, all MUSE subsystems were integrated, aligned and tested independently in each institute. After validations, the systems were shipped to the P.I. institute at Lyon and were assembled in the Integration Hall This paper describes the end-to-end optical alignment procedure of the MUSE instrument. The design strategy, mixing an optical alignment by manufacturing (plug and play approach) and few adjustments on key components, is presented. We depict the alignment method for identifying the optical axis using several references located in pupil and image planes. All tools required to perform the global alignment between each subsystem are described. The success of this alignment approach is demonstrated by the good results for the MUSE image quality. MUSE commissioning at the VLT (Very Large Telescope) is planned for 2013.

  7. Documenting Laboratory Procedures with Video

    PubMed Central

    Wyttenbach, Robert A.

    2015-01-01

    Demonstrating laboratory procedures in person during class time can be time-consuming. When procedures are done under a microscope, live demonstration is also impractical because of the limited number of students who can view the demonstration at once. Creating videos beforehand, which students can watch before class and review during lab sessions, solves both of these problems. This article suggests ways to make and distribute high quality video of microscopic procedures. PMID:26240520

  8. An evaluation of procedure 1

    NASA Technical Reports Server (NTRS)

    Wheeler, S. G.; Heydorn, R. P.; Misra, P. N.; Lee, W., Jr.; Smart, R. T. (Principal Investigator)

    1979-01-01

    LACIE Procedure 1 has undergone continuous testing and evaluation, starting with analytical and experimental studies even before it was implemented in ERIPS software and continuing to the present with performance evaluations using blind-site data. The strengths and weaknesses of the procedure are indicated and some areas for possible improvement are identified. Results from three of the experiments performed and an evaluation of LACIE Procedure 1 proportion estimates for some blind-site segments are discussed.

  9. Documenting Laboratory Procedures with Video.

    PubMed

    Wyttenbach, Robert A

    2015-01-01

    Demonstrating laboratory procedures in person during class time can be time-consuming. When procedures are done under a microscope, live demonstration is also impractical because of the limited number of students who can view the demonstration at once. Creating videos beforehand, which students can watch before class and review during lab sessions, solves both of these problems. This article suggests ways to make and distribute high quality video of microscopic procedures. PMID:26240520

  10. Using a Five-Step Procedure for Inferential Statistical Analyses

    ERIC Educational Resources Information Center

    Kamin, Lawrence F.

    2010-01-01

    Many statistics texts pose inferential statistical problems in a disjointed way. By using a simple five-step procedure as a template for statistical inference problems, the student can solve problems in an organized fashion. The problem and its solution will thus be a stand-by-itself organic whole and a single unit of thought and effort. The…

  11. Electronic Procedures for Medical Operations

    NASA Technical Reports Server (NTRS)

    2015-01-01

    Electronic procedures are replacing text-based documents for recording the steps in performing medical operations aboard the International Space Station. S&K Aerospace, LLC, has developed a content-based electronic system-based on the Extensible Markup Language (XML) standard-that separates text from formatting standards and tags items contained in procedures so they can be recognized by other electronic systems. For example, to change a standard format, electronic procedures are changed in a single batch process, and the entire body of procedures will have the new format. Procedures can be quickly searched to determine which are affected by software and hardware changes. Similarly, procedures are easily shared with other electronic systems. The system also enables real-time data capture and automatic bookmarking of current procedure steps. In Phase II of the project, S&K Aerospace developed a Procedure Representation Language (PRL) and tools to support the creation and maintenance of electronic procedures for medical operations. The goal is to develop these tools in such a way that new advances can be inserted easily, leading to an eventual medical decision support system.

  12. A Generalized Deduction of the Ideal-Solution Model

    ERIC Educational Resources Information Center

    Leo, Teresa J.; Perez-del-Notario, Pedro; Raso, Miguel A.

    2006-01-01

    A new general procedure for deriving the Gibbs energy of mixing is developed through general thermodynamic considerations, and the ideal-solution model is obtained as a special particular case of the general one. The deduction of the Gibbs energy of mixing for the ideal-solution model is a rational one and viewed suitable for advanced students who…

  13. Contact Lens Solution Toxicity

    MedlinePlus

    ... rash and rashes clinical tools newsletter | contact Share | Contact Lens Solution Toxicity Information for adults A A A This image shows a reaction to contact lens solution. The prominent blood vessels and redness ...

  14. Spectroscopic studies of solutes in aqueous solution.

    PubMed

    Chai, Bing-hua; Zheng, Jian-ming; Zhao, Qing; Pollack, Gerald H

    2008-03-20

    Absorption and fluorescence characteristics of aqueous solutions of salts, sugars, and amino acids were studied using UV-vis spectroscopy and spectrofluorometry. Motivation stemmed from unanticipated absorption spectral and fluorescence features of the "exclusion zone" seen adjacent to various hydrophilic surfaces. Those features implied a structure distinct from that of bulk water (Adv. Colloid Interface Sci. 2006, 127, 19). Absorption peaks at approximately 270 nm similar to those observed in the exclusion zone were seen in solutions of the following substances: salts, Nafion 117 solution/film, l-lysine, d-alanine, d-glucose and sucrose. To determine the fate of the absorbed energy, we studied the fluorescence properties of these solutions. The salts showed fluorescence emission around 480-490 nm under different excitation wavelengths. The fluorescence intensity of LiCl was higher than NaCl, which was in turn higher than KCl-the same ordering as the absorption intensities. Fluorescence of Nafion 117 solution/film, l-lysine, d-alanine, d-glucose and sucrose were observed as well, with multiple excitation wavelengths. Hence, at least some of the absorbed energy is released as fluorescence. The results show features closely similar to those observed in the exclusion zone, implying that the aqueous region around the solutes resembles the aqueous zone adjacent to hydrophilic surfaces. Both may be more extensively ordered than previously thought. PMID:18298105

  15. A generalized procedure for the prediction of multicomponent adsorption equilibria

    DOE PAGESBeta

    Ladshaw, Austin; Yiacoumi, Sotira; Tsouris, Costas

    2015-01-01

    Prediction of multicomponent adsorption equilibria has been investigated for several decades. While there are theories available to predict the adsorption behavior of ideal mixtures, there are few purely predictive theories to account for nonidealities in real systems. Most models available for dealing with nonidealities contain interaction parameters that must be obtained through correlation with binary-mixture data. However, as the number of components in a system grows, the number of parameters needed to be obtained increases exponentially. Here, a generalized procedure is proposed, as an extension of the predictive real adsorbed solution theory, for determining the parameters of any activity model,more » for any number of components, without correlation. This procedure is then combined with the adsorbed solution theory to predict the adsorption behavior of mixtures. As this method can be applied to any isotherm model and any activity model, it is referred to as the generalized predictive adsorbed solution theory.« less

  16. A generalized procedure for the prediction of multicomponent adsorption equilibria

    SciTech Connect

    Ladshaw, Austin; Yiacoumi, Sotira; Tsouris, Costas

    2015-01-01

    Prediction of multicomponent adsorption equilibria has been investigated for several decades. While there are theories available to predict the adsorption behavior of ideal mixtures, there are few purely predictive theories to account for nonidealities in real systems. Most models available for dealing with nonidealities contain interaction parameters that must be obtained through correlation with binary-mixture data. However, as the number of components in a system grows, the number of parameters needed to be obtained increases exponentially. Here, a generalized procedure is proposed, as an extension of the predictive real adsorbed solution theory, for determining the parameters of any activity model, for any number of components, without correlation. This procedure is then combined with the adsorbed solution theory to predict the adsorption behavior of mixtures. As this method can be applied to any isotherm model and any activity model, it is referred to as the generalized predictive adsorbed solution theory.

  17. Laboratory Procedures for Medical Assistants.

    ERIC Educational Resources Information Center

    Johnson, Pauline

    The purpose of the manual is to provide the medical assisting student a text which presents the common laboratory procedures in use today in physician's offices. The procedures for performing a complete urinalysis are outlined, along with those for carrying out various hematological tests. Information is also presented to help the student learn to…

  18. A Procedure for Morphological Analysis.

    ERIC Educational Resources Information Center

    Chapin, Paul G.; Norton, Lewis M.

    A procedure, designated "MORPH," has been developed for the automatic morphological analysis of complex English words. Each word is reduced to a stem in canonical or dictionary form, plus affixes, inflectional and derivational, represented as morphemes or as syntactic features of the stem. The procedure includes the task of analyzing as many…

  19. Accounting Procedures for Student Organizations.

    ERIC Educational Resources Information Center

    California State Dept. of Education, Sacramento.

    This two-part handbook presents information on accounting procedures for student organizations, with a focus on the laws, policies, and procedures that affect student body organizations. Part 1 contains information about: (1) legal status of a school's student body organization; (2) principles governing student body finance; (3) administration of…

  20. EVALUATION OF OZONE CALIBRATION PROCEDURES

    EPA Science Inventory

    In October of 1976, the U.S. Environmental Protection Agency announced that the calibration procedure then currently in use for reference methods for the measurement of ozone in the atmosphere -- the neutral buffered potassium iodide procedure -- had been found variable and in so...

  1. Characteristics of Multiple Comparison Procedures.

    ERIC Educational Resources Information Center

    Yusuf, Mian Muhammad; And Others

    Multiple comparison procedures (MCPs), in the context of analysis of variance, are becoming more popular than the overall F tests. An attempt is made to clarify confusion among the different MCPs by systematically comparing and contrasting the procedures in terms of their purposes, restrictions, robustness to assumptions, and other special…

  2. Developing Competency in Payroll Procedures

    ERIC Educational Resources Information Center

    Jackson, Allen L.

    1975-01-01

    The author describes a sequence of units that provides for competency in payroll procedures. The units could be the basis for a four to six week minicourse and are adaptable, so that the student, upon completion, will be able to apply his learning to any payroll procedures system. (Author/AJ)

  3. Ultrasound-Guided Hip Procedures.

    PubMed

    Payne, Jeffrey M

    2016-08-01

    This article describes the techniques for performing ultrasound-guided procedures in the hip region, including intra-articular hip injection, iliopsoas bursa injection, greater trochanter bursa injection, ischial bursa injection, and piriformis muscle injection. The common indications, pitfalls, accuracy, and efficacy of these procedures are also addressed. PMID:27468669

  4. Writer's Guide for technical procedures

    SciTech Connect

    Not Available

    1991-09-01

    A primary objective throughout the Department of Energy (DOE) complex is that operations be conducted in a deliberate and controlled manner with emphasis upon recognition and maintenance of the facility-specific safety envelope. One critical element of maintaining the safety envelope is procedures. DOE is providing guidance through this and other writer's guides to assist procedure writers across the DOE complex in producing accurate, complete, and usable procedures that promote safe and efficient operations in keeping with such DOE Orders as 5480.19, Conduct of Operations for DOE Facilities'', 5480.5, Safety of Nuclear facilities'', and 5480.6, Safety of Department of Energy-Owned Nuclear Reactors''. This Writer's Guide addresses the content, format, and style of technical procedures (procedures that prescribe production, operation of equipment and facilities, and maintenance activities) and is intended to be applied in a manner appropriate to the individual facility, 15 refs.

  5. A new procedure for calculating contact stresses in gear teeth

    NASA Technical Reports Server (NTRS)

    Somprakit, Paisan; Huston, Ronald L.

    1991-01-01

    A numerical procedure for evaluating and monitoring contact stresses in meshing gear teeth is discussed. The procedure is intended to extend the range of applicability and to improve the accuracy of gear contact stress analysis. The procedure is based upon fundamental solution from the theory of elasticity. It is an iterative numerical procedure. The method is believed to have distinct advantages over the classical Hertz method, the finite-element method, and over existing approaches with the boundary element method. Unlike many classical contact stress analyses, friction effects and sliding are included. Slipping and sticking in the contact region are studied. Several examples are discussed. The results are in agreement with classical results. Applications are presented for spur gears.

  6. Fresh osteochondral allografts in the knee: only a salvage procedure?

    PubMed

    Gobbi, Alberto; Scotti, Celeste; Lane, John G; Peretti, Giuseppe M

    2015-07-01

    The role of fresh allogeneic osteochondral allograft transplantation (OCA) in the cartilage repair algorithm has been long debated and this procedure is primarily considered as a salvage procedure, to be used when other, simple, techniques have failed. Gracitelli et al. in a retrospective comparison of patients who received OCA as primary treatment or as a salvage procedure, demonstrates that the outcome of this procedure is minimally influenced by a previous failed treatment and that OCA represents an effective solution for both primary and revision surgery of chondral and osteochondral lesions of the knee. In particular, optimal indications for OCA seem to be revision of previously failed bone marrow stimulation techniques with an impaired subchondral bone plate and primary treatment of large osteochondral defects. PMID:26261835

  7. Spatial adaptation procedures on tetrahedral meshes for unsteady aerodynamic flow calculations

    NASA Technical Reports Server (NTRS)

    Rausch, Russ D.; Batina, John T.; Yang, Henry T. Y.

    1993-01-01

    Spatial adaptation procedures for the accurate and efficient solution of steady and unsteady inviscid flow problems are described. The adaptation procedures were developed and implemented within a three-dimensional, unstructured-grid, upwind-type Euler code. These procedures involve mesh enrichment and mesh coarsening to either add points in high gradient regions of the flow or remove points where they are not needed, respectively, to produce solutions of high spatial accuracy at minimal computational cost. A detailed description of the enrichment and coarsening procedures are presented and comparisons with experimental data for an ONERA M6 wing and an exact solution for a shock-tube problem are presented to provide an assessment of the accuracy and efficiency of the capability. Steady and unsteady results, obtained using spatial adaptation procedures, are shown to be of high spatial accuracy, primarily in that discontinuities such as shock waves are captured very sharply.

  8. VLBI-SLR Combination Solution Using GEODYN

    NASA Astrophysics Data System (ADS)

    MacMillan, D. S.; Lemoine, F. G.; Chinn, D. S.; Pavlis, E. C.; Rowlands, D. D.

    2009-12-01

    The traditional procedure followed by the IERS for generating an ITRF is to perform a combination at the technique level. Each geodetic technique provides a solution that itself is a combination of the solutions produced by the technique analysis centers. Alternatively, we would like to generate a multi-technique solution using the same software and using the same a priori models. We seek to produce such a solution combining all of the geodetic techniques at the normal equation level using GEODYN but here, as a first step, consider only the SLR-VLBI combination. The data from each 24-hour VLBI session is initially processed to generate VLBI observation and solution parametrization files for input to GEODYN. Extensive tests have been performed to ensure that the VLBI theoretical delay as calculated by the VLBI Calc/Solve software is the same (to 1 ps) as that calculated by GEODYN. Initially, we ran test solutions with GEODYN using only VLBI data to verify that VLBI solution results produced with GEODYN agree with results using Calc/Solve. Then we combine the VLBI normal equations in GEODYN with weekly SLR normal equations for the period 2004-2008 Lageos1/2 to estimate station positions and Earth orientation parameters. To connect the techniques, we apply the ground ties used by the IERS. Here we report on the results of the combination.

  9. Back to basics: procedural sedation.

    PubMed

    Spruce, Lisa

    2015-03-01

    Patients undergoing surgery frequently receive procedural sedation from RNs in the perioperative setting. With appropriate training, perioperative RNs can administer procedural sedation safely and effectively, helping to eliminate the pain and anxiety often experienced by patients. Facility sedation protocols should provide guidance on training requirements, the RN's role, the credentialing process, the medications the RN may use, and when anesthesia personnel should be consulted. Creating these protocols is guided by state scope of practice laws, Centers for Medicare & Medicaid Services Interpretive Guidelines, and accreditation requirements. Training, physician guidance, and appropriate protocols give the necessary support for perioperative nurses to provide safe and effective procedural sedation. PMID:25707727

  10. Practical pearls for oral procedures.

    PubMed

    Davari, Parastoo; Fazel, Nasim

    2016-01-01

    We provide an overview of clinically relevant principles of oral surgical procedures required in the workup and management of oral mucosal diseases. An understanding of the fundamental concepts of how to perform safely and effectively minor oral procedures is important to the practicing dermatologist and can minimize the need for patient referrals. This chapter reviews the principles of minor oral procedures, including incisional, excisional, and punch biopsies, as well as minor salivary gland excision. Pre- and postoperative patient care is also discussed. PMID:27343958

  11. Structure of supersaturated zincate solutions

    SciTech Connect

    Dmitrenko, V.E.; Balyakina, N.N.; Baulov, V.I.; Kotov, A.V.; Zubov, M.S.

    1985-09-01

    During the discharge of chemical power sources with zinc electrodes, supersaturated zincate solution (SZS) is formed from which zinc oxide or hydroxide precipitates as a function of time. The deposit detracts from the functioning of these power sources. In view of the model suggested for the structure of SZS, it is expected that a stabilizing effect would be exerted on SZS by compounds having proton-donating groups which do not give off the protons in the strongly alkaline medium and are not discharged in this medium. For a check of this, the authors chose to use xylitol and molasses in their experiments. The SZS were produced with a mock-up silver-zinc battery using the procedure previously described.

  12. A numerical procedure for three-dimensional transient free surface seepage

    NASA Astrophysics Data System (ADS)

    Desai, C. S.; Lightner, J. G.; Somasundaram, S.

    A three-dimensional procedure based on the finite element method is proposed for transient free surface seepage. It involves solution of the governing equations by using a time integration scheme. The procedure is applied for solution of confined, and transient free surface flow; the latter includes verification with respect to test results from a laboratory model. It is also applied to free surface flow through a dam with a crack.

  13. Solution deposition assembly

    SciTech Connect

    Roussillon, Yann; Scholz, Jeremy H; Shelton, Addison; Green, Geoff T; Utthachoo, Piyaphant

    2014-01-21

    Methods and devices are provided for improved deposition systems. In one embodiment of the present invention, a deposition system is provided for use with a solution and a substrate. The system comprises of a solution deposition apparatus; at least one heating chamber, at least one assembly for holding a solution over the substrate; and a substrate curling apparatus for curling at least one edge of the substrate to define a zone capable of containing a volume of the solution over the substrate. In another embodiment of the present invention, a deposition system for use with a substrate, the system comprising a solution deposition apparatus; at heating chamber; and at least assembly for holding solution over the substrate to allow for a depth of at least about 0.5 microns to 10 mm.

  14. Urinary incontinence - vaginal sling procedures

    MedlinePlus

    ... types of surgeries that help control stress urinary incontinence . This is urine leakage that happens when you ... sling procedures are done to treat stress urinary incontinence. Before discussing surgery, your doctor will have you ...

  15. Loop Electrosurgical Excision Procedure (LEEP)

    MedlinePlus

    ... that acts like a scalpel (surgical knife). An electric current is passed through the loop, which cuts away ... A procedure in which an instrument works with electric current to destroy tissue. Local Anesthesia: The use of ...

  16. Surface Environmental Surveillance Procedures Manual

    SciTech Connect

    Hanf, RW; Dirkes, RL

    1990-02-01

    This manual establishes the procedures for the collection of environmental samples and the performance of radiation surveys and other field measurements. Responsibilities are defined for those personnel directly involved in the collection of samples and the performance of field measurements.

  17. Bronchoplastic procedures for lung cancer.

    PubMed

    Naruke, T; Yoneyama, T; Ogata, T; Suemasu, K

    1977-06-01

    Twenty patients with lung cancer have undergone bronchoplastic procedures September, 1965, to June, 1976 in our hospital. Bronchoplastic procedures are considered to be indicated for early cases of hilar lung cancer rather than for somewhat advanced cases. Endoscopic examination and roentgenograms of the bronchial arteries are needed to delineate resectional lines of bronchus, the former for deciding the mucosal extent and the latter the intrabronchial extent of the tumor. The bronchoplastic procedures we adopted were free from the risks and dangers generally accompanying the operation, and there were no postoperative deaths. For the prevention of postoperative complications, careful attention to suture technique is needed, and postoperative bronchoscopic suction of intrabronchial secretions is absolutely necessary. These procedures assure good quality of life postoperatively and improvement in the survival rate by preserving pulmonary function, enhancing curability, and increasing the operative indications. These advantages warrant high evaluation of the operation. PMID:870767

  18. Quarantine document system indexing procedure

    NASA Technical Reports Server (NTRS)

    1972-01-01

    The Quarantine Document System (QDS) is described including the indexing procedures and thesaurus of indexing terms. The QDS consists of these functional elements: acquisition, cataloging, indexing, storage, and retrieval. A complete listing of the collection, and the thesaurus are included.

  19. Urinary incontinence - vaginal sling procedures

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/007376.htm Urinary incontinence - vaginal sling procedures To use the sharing features ... are types of surgeries that help control stress urinary incontinence . This is urine leakage that happens when you ...

  20. REMEDIAL ACTION COSTING PROCEDURES MANUAL

    EPA Science Inventory

    The manual provides specific procedures for the cost estimating and economic analysis steps required for preparing engineering cost estimates for selecting remedial action alternatives in response to the requirements of the Comprehensive Environmental Response, Compensation, and ...

  1. Adolescent test or procedure preparation

    MedlinePlus

    ... someone else) during the procedure Playing hand-held video games Using guided imagery Trying other distractions, such as ... effects the test may cause. Older adolescents may benefit from videos that show adolescents of the same ...

  2. Adolescent test or procedure preparation

    MedlinePlus

    ... else) during the procedure Playing hand-held video games Using guided imagery Trying other distractions, such as ... Alexander M. Managing patient stress in pediatric radiology. Radiol Technol . ... . Bray L, Callery P, Kirk S. A qualitative study ...

  3. Preschooler test or procedure preparation

    MedlinePlus

    ... procedure or other situation to ensure your child's safety. Restraints may be used to keep your child safe when staff temporarily have to leave the room during x-ray and nuclear studies. They may also be used when a ...

  4. Topical diclofenac solution.

    PubMed

    Moen, Marit D

    2009-01-01

    Topical diclofenac solution (Pennsaid) is a liquid formulation containing the NSAID diclofenac sodium (1.5% w/w). The solution base contains 45% w/w dimethyl sulfoxide (DMSO) to enhance the absorption of diclofenac through the skin. Topical diclofenac solution is applied directly to the knee for treatment of symptoms associated with osteoarthritis of the knee. In well designed 4- to 12-week trials in patients with primary osteoarthritis of the knee, topical diclofenac solution (40 drops four times daily) was significantly more effective than placebo or vehicle control (carrier solution without diclofenac) for improving Western Ontario and McMaster Universities (WOMAC) Osteoarthritis Index pain and physical function, and improving patient global assessment (PGA) and/or patient overall health assessment scores from baseline to the final assessments. Topical diclofenac solution (50 drops three times daily) was as effective as oral diclofenac 150 mg/day for improving WOMAC pain and physical function and PGA scores in a 12-week double-blind study in patients with osteoarthritis of the knee. Topical diclofenac solution was generally well tolerated. The most common treatment-emergent adverse event experienced by topical diclofenac solution recipients was dry skin at the application site. Gastrointestinal adverse events and abnormal laboratory parameters were less common with topical diclofenac solution than with oral diclofenac. PMID:19943711

  5. Mixed oxide solid solutions

    DOEpatents

    Magno, Scott; Wang, Ruiping; Derouane, Eric

    2003-01-01

    The present invention is a mixed oxide solid solution containing a tetravalent and a pentavalent cation that can be used as a support for a metal combustion catalyst. The invention is furthermore a combustion catalyst containing the mixed oxide solid solution and a method of making the mixed oxide solid solution. The tetravalent cation is zirconium(+4), hafnium(+4) or thorium(+4). In one embodiment, the pentavalent cation is tantalum(+5), niobium(+5) or bismuth(+5). Mixed oxide solid solutions of the present invention exhibit enhanced thermal stability, maintaining relatively high surface areas at high temperatures in the presence of water vapor.

  6. Wormholes in Wyman's solution

    NASA Astrophysics Data System (ADS)

    Formiga, J. B.; Almeida, T. S.

    2014-10-01

    The most general solution of the Einstein field equations coupled with a massless scalar field is known as Wyman's solution. This solution is also present in the Brans-Dicke theory and, due to its importance, it has been studied in detail by many authors. However, this solutions has not been studied from the perspective of a possible wormhole. In this paper, we perform a detailed analysis of this issue. It turns out that there is a wormhole. Although we prove that the so-called throat cannot be traversed by human beings, it can be traversed by particles and bodies that can last long enough.

  7. Establishment of new asylum procedures.

    PubMed

    1988-01-01

    As of May 1988, the Austrian Government instituted new accelerated asylum procedures which enable applicants to know within a short time whether they are granted refugee status. Those who are not granted such status are refused further government assistance and asked to leave the country. This change in procedures was undertaken in part because of the increased number of applicants resulting from the abolishment of the visa requirement for citizens of Hungary and Poland travelling to Austria. PMID:12289355

  8. Pumping glycol solutions in the HVAC industry

    SciTech Connect

    Rishel, J.B.; Schlachter, J.P.

    1997-12-31

    Ethylene and propylene glycols are used in heating, ventilating, and airconditioning (HVAC) water systems for operations that can occur below the freezing point of pure water. Typical applications are for generating ice storage and preventing freezing in coils that are exposed to outside air. The type of glycol and the percentage of solution to be used are decisions that are made by the designer of the water system utilizing the glycols. The purpose of this paper is to (1) present the basic procedures required for the selection of piping and pumps for the glycol that has been selected for a particular water system and (2) to demonstrate the effect that the specific gravity and the viscosity of the glycol solution can have on pipe friction and pump performance. Although much of this information has been presented in other ASHRAE technical documents, it is repeated here in the hopes that a relatively simple procedure will be provided for determining the effect of glycol solution viscosity and specific gravity upon piping design and pump operation. A brief review will be made of a glycol`s characteristics followed by the procedures for calculation of piping friction for a glycol system and computation of pump performance. Review also will be made of the use of variable-speed pumping on glycol systems. All of the information will be based upon ethylene glycol; similar data and calculations could be generated for propylene glycol.

  9. Intraoperative laparoscopic complications for urological cancer procedures

    PubMed Central

    Montes, Sergio Fernández-Pello; Rodríguez, Ivan Gonzalez; Ugarteburu, Rodrigo Gil; Villamil, Luis Rodríguez; Mendez, Begoña Diaz; Gil, Patricio Suarez; Madera, Javier Mosquera

    2015-01-01

    AIM: To structure the rate of intraoperative complications that requires an intraoperative or perioperative resolution. METHODS: We perform a literature review of Medline database. The research was focused on intraoperative laparoscopic procedures inside the field of urological oncology. General rate of perioperative complications in laparoscopic urologic surgery is described to be around 12.4%. Most of the manuscripts published do not make differences between pure intraoperative, intraoperative with postoperative consequences and postoperative complications. RESULTS: We expose a narrative statement of complications, possible solutions and possible preventions for most frequent retroperitoneal and pelvic laparoscopic surgery. We expose the results with the following order: retroperitoneal laparoscopic surgery (radical nephrectomy, partial nephrectomy, nephroureterectomy and adrenalectomy) and pelvic laparoscopic surgery (radical prostatectomy and radical cystectomy). CONCLUSION: Intraoperative complications vary from different series. More scheduled reports should be done in order to better understand the real rates of complications. PMID:25984519

  10. The phacoemulsification procedure. II. Corneal endothelial changes.

    PubMed

    Polack, F M; Sugar, A

    1976-06-01

    The effect of phacoemulsification, with the Cavitron-Kelman instrument, on the corneal endothelium of rabbit and cats was studied by scanning electron microscopy and nitroblue tetrazolium staining. The various steps of the procedure were examined separately. Irrigation of the anterior chamber of the eye with balanced salt solution (Plasma-Lyte) for ten minutes caused no cell damage. Ultrasound and irrigation alone for four to six minutes caused increased permeability to NBT. Edema of endothelial cells and cell junction disruption occurred after eight minutes of anterior chamber irrigation with Plasma-Lyte. Uncomplicated phacoemulsification produced moderate cellular edema with scattered loss of endothelial cells. Destruction of endothelial cells was frequent after phacoemulsification, it appeared to be due to lens nucleus manipulation in the anterior chamber, instrumentation, and needle contact. From two to five days postoperatively, intercellular edema, altered cell morphology, and mosaic pattern were seen. However, it gradually recovered and seven to ten days later the endothelium appeared normal. PMID:931690

  11. A Comparison of Heuristic Procedures for Minimum within-Cluster Sums of Squares Partitioning

    ERIC Educational Resources Information Center

    Brusco, Michael J.; Steinley, Douglas

    2007-01-01

    Perhaps the most common criterion for partitioning a data set is the minimization of the within-cluster sums of squared deviation from cluster centroids. Although optimal solution procedures for within-cluster sums of squares (WCSS) partitioning are computationally feasible for small data sets, heuristic procedures are required for most practical…

  12. 9 CFR 147.7 - Standard test procedures for mycoplasma. 5

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Blood Testing Procedures § 147.7 Standard test procedures for mycoplasma. 5 5 For additional information... pipette or standardized loop (rinsed between samples) to 11/2 inch squares on a ruled glass plate. Limit... deposit resuspended to give a 25 percent suspension of packed RBC's in Alsever's solution. (In...

  13. Stop Disease: Diapering Procedures = Alto a las Enfermedades: Procedimientos para Cambiar Panales.

    ERIC Educational Resources Information Center

    California Child Care Health Program, Oakland.

    In order to prevent the occurrence and spread of disease in California child care programs, this set of laminated procedure pages, in English and Spanish versions, details infant and child care procedures for safe diapering. The document delineates important rules about diapering, gives directions for making a disinfecting solution, and provides…

  14. Effects of Covariance Heterogeneity on Three Procedures for Analyzing Multivariate Repeated Measures Designs.

    ERIC Educational Resources Information Center

    Vallejo, Guillermo; Fidalgo, Angel; Fernandez, Paula

    2001-01-01

    Estimated empirical Type I error rate and power rate for three procedures for analyzing multivariate repeated measures designs: (1) the doubly multivariate model; (2) the Welch-James multivariate solution (H. Keselman, M. Carriere, a nd L. Lix, 1993); and (3) the multivariate version of the modified Brown-Forsythe procedure (M. Brown and A.…

  15. A procedure for the joint evaluation of substrate partitioning and kinetic parameters for reactions catalyzed by enzymes in reverse micellar solutions. I. Hydrolysis of 2-naphthyl acetate catalyzed by lipase in sodium 1,4-bis(2-ethylhexyl) sulphosuccinate (AOT)/buffer/heptane.

    PubMed

    Aguilar, L F; Abuin, E; Lissi, E

    2001-04-15

    A simple method useful for the joint evaluation of substrate partitioning and kinetic parameters for reactions catalyzed by enzymes entrapped in reverse micelles is proposed. The method is applied to the hydrolysis of 2-naphthyl acetate (2-NA) catalyzed by lipase in sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (AOT)/buffer/heptane reverse micellar solutions. In the presence of micelles, the relationship between the initial reaction rate and the analytical concentration of 2-NA was dependent on AOT concentration at a constant W ([water]/[AOT]) value. The dependence of the initial reaction rate profiles with [AOT] was analyzed according with the method proposed to obtain the partition constant of 2-NA between the micelles and the external solvent, Kp. A value of Kp = 2.7 L mol(-1) was obtained irrespective of the water content of the micelles (W from 5 to 20). The catalytic rate constant kcat in the micellar solutions was independent of [AOT] but slightly decreased with an increase in W from 2 x 10(-6) mol g(-1) s(-1) at W = 5 to 1.2 x 10(-6) mol g(-1) s(-1) at W = 20. The apparent Michaelis constant determined in terms of the analytical concentration of 2-NA increased with [AOT] at a given W and moderately decreased with W at a fixed [AOT]. The increase with [AOT] is accounted for by considering the partitioning of the substrate. After correction for the partitioning of 2-NA values of (Km)corr were obtained as 3.9 x 10(-3) mol L(-1) (W = 5), 4.6 x 10(-3) mol L(-1) (W = 10), 2.3 x 10(-3) mol L(-1) (W = 15), and 1.7 x 10(-3) mol L(-1) (W = 20). The rate parameters in the aqueous phase in the absence of micelles, were obtained as (kcat)aq = 7.9 x 10(-6) mol g(-1) s(-1) and (Km)aq = 2.5 x 10(-3) mol L(-1). In order to compare the efficiency of the enzyme in the micellar solution with that in aqueous phase, the values of (Km)corr were in turn corrected to take into account differences in the substrate activity, obtaining so a set of (Km)*corr values. The efficiency of the

  16. Study of viscous flow about airfoils by the integro-differential method

    NASA Technical Reports Server (NTRS)

    Wu, J. C.; Sampath, S.

    1975-01-01

    An integro-differential method was used for numerically solving unsteady incompressible viscous flow problems. A computer program was prepared to solve the problem of an impulsively started 9% thick symmetric Joukowski airfoil at an angle of attack of 15 deg and a Reynolds number of 1000. Some of the results obtained for this problem were discussed and compared with related work completed previously. Two numerical procedures were used, an Alternating Direction Implicit (ADI) method and a Successive Line Relaxation (SLR) method. Generally, the ADI solution agrees well with the SLR solution and with previous results are stations away from the trailing edge. At the trailing edge station, the ADI solution differs substantially from previous results, while the vorticity profiles obtained from the SLR method there are in good qualitative agreement with previous results.

  17. Cromolyn Sodium Nasal Solution

    MedlinePlus

    Cromolyn comes as a solution to use with a special nasal applicator. It usually is inhaled three to six times a day to prevent allergy ... first time, read the instructions provided with the solution. Ask your doctor, pharmacist, or respiratory therapist to ...

  18. Code Verification by the Method of Manufactured Solutions

    SciTech Connect

    SALARI,KAMBIZ; KNUPP,PATRICK

    2000-06-01

    A procedure for code Verification by the Method of Manufactured Solutions (MMS) is presented. Although the procedure requires a certain amount of creativity and skill, we show that MMS can be applied to a variety of engineering codes which numerically solve partial differential equations. This is illustrated by detailed examples from computational fluid dynamics. The strength of the MMS procedure is that it can identify any coding mistake that affects the order-of-accuracy of the numerical method. A set of examples which use a blind-test protocol demonstrates the kinds of coding mistakes that can (and cannot) be exposed via the MMS code Verification procedure. The principle advantage of the MMS procedure over traditional methods of code Verification is that code capabilities are tested in full generality. The procedure thus results in a high degree of confidence that all coding mistakes which prevent the equations from being solved correctly have been identified.

  19. Solvent wash solution

    DOEpatents

    Neace, J.C.

    1984-03-13

    A process is claimed for removing diluent degradation products from a solvent extraction solution, which has been used to recover uranium and plutonium from spent nuclear fuel. A wash solution and the solvent extraction solution are combined. The wash solution contains (a) water and (b) up to about, and including, 50 vol % of at least one-polar water-miscible organic solvent based on the total volume of the water and the highly-polar organic solvent. The wash solution also preferably contains at least one inorganic salt. The diluent degradation products dissolve in the highly-polar organic solvent and the organic solvent extraction solvent do not dissolve in the highly-polar organic solvent. The highly-polar organic solvent and the extraction solvent are separated.

  20. Solvent wash solution

    DOEpatents

    Neace, James C.

    1986-01-01

    Process for removing diluent degradation products from a solvent extraction solution, which has been used to recover uranium and plutonium from spent nuclear fuel. A wash solution and the solvent extraction solution are combined. The wash solution contains (a) water and (b) up to about, and including, 50 volume percent of at least one-polar water-miscible organic solvent based on the total volume of the water and the highly-polar organic solvent. The wash solution also preferably contains at least one inorganic salt. The diluent degradation products dissolve in the highly-polar organic solvent and the organic solvent extraction solvent do not dissolve in the highly-polar organic solvent. The highly-polar organic solvent and the extraction solvent are separated.

  1. Human factoring the procedures element in a complex manufacturing system

    SciTech Connect

    Caccamise, D.J.; Mecherikoff, M.

    1993-06-01

    As a result of Human Factors evaluations of procedures associated with incidents at Rocky Flats Plant (RFP) it was determined that the existing procedure format created significant opportunities for confusion in their attempt to convey information about a work process. For instance, there was no mechanism to clearly identify the participants and their roles during the instructions portion of the procedure. In addition, procedure authors frequently used complex logic to convey a series of contingent actions within steps. It was also difficult to discern the actual procedure steps from other types of information in the procedure. These and other inadequacies prompted the Human Factors Engineering (HFE) department to propose solutions to these problems that followed well-researched principles of cognitive psychology, dealing with how humans process information. Format and style contribute to procedure usability, and therefore to safety and efficiency in operations governed by the procedures. Since it was difficult to tie specific performance failures to specific format and style characteristics and thereby dearly define costs and benefits, it was difficult on that basis to sell the idea that changes in procedure format and style were really necessary to improve safety and efficiency. In addition, we found that the socio-political systems governing this process, particularly at the subprocess interface level, were not functioning efficiently. Both the technological aspects of the process and the socio-political aspects were contributing to waste and considerable re-work. Fixing the customer feedback loop to the process owners not only minimized re-work and waste, but also provided the data to persuade subprocess owners to make the necessary changes that heretofore were being met with great resistance.

  2. Approximated solutions to Born-Infeld dynamics

    NASA Astrophysics Data System (ADS)

    Ferraro, Rafael; Nigro, Mauro

    2016-02-01

    The Born-Infeld equation in the plane is usefully captured in complex language. The general exact solution can be written as a combination of holomorphic and anti-holomorphic functions. However, this solution only expresses the potential in an implicit way. We rework the formulation to obtain the complex potential in an explicit way, by means of a perturbative procedure. We take care of the secular behavior common to this kind of approach, by resorting to a symmetry the equation has at the considered order of approximation. We apply the method to build approximated solutions to Born-Infeld electrodynamics. We solve for BI electromagnetic waves traveling in opposite directions. We study the propagation at interfaces, with the aim of searching for effects susceptible to experimental detection. In particular, we show that a reflected wave is produced when a wave is incident on a semi-space containing a magnetostatic field.

  3. Reporting Child Language Sampling Procedures

    PubMed Central

    Finestack, Lizbeth H.; Payesteh, Bita; Disher, Jill Rentmeester; Julien, Hannah M.

    2015-01-01

    Purpose Despite the long history of language sampling use in the study of child language development and disorders, there are no set guidelines specifying the reporting of language sampling procedures. The authors propose reporting standards for use by investigators who employ language samples in their research. Method The authors conducted a literature search of child-focused studies published in journals of the American Speech-Language-Hearing Association between January 2000 and December 2011 that included language sampling procedures to help characterize child participants or to derive measures to serve as dependent variables. Following this search, they reviewed each study and documented the language sampling procedures reported. Results The authors’ synthesis revealed that approximately 25% of all child-focused studies use language samples to help characterize participants and/or derive dependent variables. They found remarkable inconsistencies in the reporting of language sampling procedures. Conclusion To maximize the conclusions drawn from research using language samples, the authors strongly encourage investigators of child language to consistently report language sampling procedures using the proposed reporting checklist. PMID:25399013

  4. 7 CFR 47.20 - Documentary procedure.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 2 2011-01-01 2011-01-01 false Documentary procedure. 47.20 Section 47.20 Agriculture... Documentary procedure. (a) In general. The documentary procedure described in this section shall, whenever it... oral hearing procedure hereinbefore provided. Under the documentary procedure, the pleadings of...

  5. 7 CFR 47.20 - Documentary procedure.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Documentary procedure. 47.20 Section 47.20 Agriculture... Documentary procedure. (a) In general. The documentary procedure described in this section shall, whenever it... oral hearing procedure hereinbefore provided. Under the documentary procedure, the pleadings of...

  6. 40 CFR 1033.315 - Test procedures.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Test procedures. 1033.315 Section 1033... Programs § 1033.315 Test procedures. (a) Test procedures. Use the test procedures described in subpart F of this part, except as specified in this section. (1) You may ask to use other test procedures. We...

  7. 7 CFR 47.20 - Documentary procedure.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 2 2013-01-01 2013-01-01 false Documentary procedure. 47.20 Section 47.20 Agriculture... Documentary procedure. (a) In general. The documentary procedure described in this section shall, whenever it... oral hearing procedure hereinbefore provided. Under the documentary procedure, the pleadings of...

  8. 7 CFR 47.20 - Documentary procedure.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 2 2014-01-01 2014-01-01 false Documentary procedure. 47.20 Section 47.20 Agriculture... Documentary procedure. (a) In general. The documentary procedure described in this section shall, whenever it... oral hearing procedure hereinbefore provided. Under the documentary procedure, the pleadings of...

  9. 7 CFR 47.20 - Documentary procedure.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 2 2012-01-01 2012-01-01 false Documentary procedure. 47.20 Section 47.20 Agriculture... Documentary procedure. (a) In general. The documentary procedure described in this section shall, whenever it... oral hearing procedure hereinbefore provided. Under the documentary procedure, the pleadings of...

  10. 40 CFR 1033.315 - Test procedures.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 34 2012-07-01 2012-07-01 false Test procedures. 1033.315 Section 1033... Programs § 1033.315 Test procedures. (a) Test procedures. Use the test procedures described in subpart F of this part, except as specified in this section. (1) You may ask to use other test procedures. We...

  11. 40 CFR 1033.315 - Test procedures.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 33 2011-07-01 2011-07-01 false Test procedures. 1033.315 Section 1033... Programs § 1033.315 Test procedures. (a) Test procedures. Use the test procedures described in subpart F of this part, except as specified in this section. (1) You may ask to use other test procedures. We...

  12. 34 CFR 303.170 - Procedural safeguards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... process procedures in 34 CFR 300.506 through 300.512; or (2) The procedures that the State has developed... 34 Education 2 2011-07-01 2010-07-01 true Procedural safeguards. 303.170 Section 303.170 Education... Procedural safeguards. Each application must include procedural safeguards that— (a) Are consistent...

  13. 34 CFR 303.170 - Procedural safeguards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...— (1) The due process procedures in 34 CFR 300.506 through 300.512; or (2) The procedures that the... 34 Education 2 2010-07-01 2010-07-01 false Procedural safeguards. 303.170 Section 303.170... Requirements § 303.170 Procedural safeguards. Each application must include procedural safeguards that— (a)...

  14. Conduction heat transfer solutions

    SciTech Connect

    VanSant, J.H.

    1980-03-01

    This text is a collection of solutions to a variety of heat conduction problems found in numerous publications, such as textbooks, handbooks, journals, reports, etc. Its purpose is to assemble these solutions into one source that can facilitate the search for a particular problem solution. Generally, it is intended to be a handbook on the subject of heat conduction. This material is useful for engineers, scientists, technologists, and designers of all disciplines, particularly those who design thermal systems or estimate temperatures and heat transfer rates in structures. More than 500 problem solutions and relevant data are tabulated for easy retrieval. There are twelve sections of solutions which correspond with the class of problems found in each. Geometry, state, boundary conditions, and other categories are used to classify the problems. A case number is assigned to each problem for cross-referencing, and also for future reference. Each problem is concisely described by geometry and condition statements, and many times a descriptive sketch is also included. At least one source reference is given so that the user can review the methods used to derive the solutions. Problem solutions are given in the form of equations, graphs, and tables of data, all of which are also identified by problem case numbers and source references.

  15. Fluorometric procedures for dye tracing

    USGS Publications Warehouse

    Wilson, James F.; Cobb, Ernest D.; Kilpatrick, F.A.

    1986-01-01

    This manual describes the current fluorometric procedures used by the U.S. Geological Survey in dye tracer studies such as time of travel, dispersion, reaeration, and dilution-type discharge measurements. The advantages of dye tracing are (1) low detection and measurement limits and (2) simplicity and accuracy in measuring dye tracer concentrations using fluorometric techniques. The manual contains necessary background information about fluorescence, dyes, and fluorometers and a description of fluorometric operation and calibration procedures as a guide for laboratory and field use. The background information should be useful to anyone wishing to experiment with dyes, fluorometer components, or procedures different from those described. In addition, a brief section on aerial photography is included because of its possible use to supplement ground-level fluorometry.

  16. Fluorometric procedures for dye tracing

    USGS Publications Warehouse

    Wilson, James E., Jr.; Cobb, E.D.; Kilpatrick, F.A.

    1984-01-01

    This manual describes the current fluorometric procedures used by the U.S. Geological Survey in dye tracer studies such as time of travel, dispersion, reaeration, and dilution-type discharge measurements. The outstanding characteristics of dye tracing are: (1) the low detection and measurement limits, and (2) the simplicity and accuracy of measuring dye tracer concentrations using fluorometric techniques. The manual contains necessary background information about fluorescence, dyes, and fluorometers and a description of fluorometric operation and calibration procedures as a general guide for laboratory and field use. The background information should be useful to anyone wishing to experiment with dyes, fluorometer components, or procedures different from those described. In addition, a brief section is included on aerial photography because of its possible use to supplement ground-level fluorometry. (USGS)

  17. Fluorometric procedures for dye tracing

    USGS Publications Warehouse

    Wilson, James F.

    1968-01-01

    This manual describes the current fluorometric procedures used by the U.S. Geological Survey in dye tracer studies such as time of travel, dispersion, reaeration, and dilution-type discharge measurements. The advantages of dye tracing are (1) low detection and measurement limits and (2) simplicity and accuracy in measuring dye tracer concentrations using fluorometric techniques. The manual contains necessary background information about fluorescence, dyes, and fluorometers and a description of fluorometric operation and calibration procedures as a guide for laboratory and field use. The background information should be useful to anyone wishing to experiment with dyes, fluorometer components, or procedures different from those described. In addition, a brief section on aerial photography is included because of its possible use to supplement ground-level fluorometry.

  18. Authentication Procedures - The Procedures and Integration Working Group

    SciTech Connect

    Kouzes, Richard T.; Bratcher, Leigh; Gosnell, Tom; Langner, Diana; MacArthur, D.; Mihalczo, John T.; Pura, Carolyn; Riedy, Alex; Rexroth, Paul; Scott, Mary; Springarn, Jay

    2001-05-31

    Authentication is how we establish trust in monitoring systems and measurements to verify compliance with, for example, the storage of nuclear weapons material. Authentication helps assure the monitoring party that accurate and reliable information is provided by any measurement system and that any irregularities are detected. The U.S. is developing its point of view on the procedures for authentication of monitoring systems now planned or contemplated for arms reduction and control applications. The authentication of a system utilizes a set of approaches, including: functional testing using trusted calibration sources, evaluation of documentation, evaluation of software, evaluation of hardware, random selection of hardware and software, tamper-indicating devices, and operational procedures. Authentication of measurement systems should occur throughout their lifecycles, starting with the elements of design, and moving to off-site authentication, on-siste authentication, and continuing with authentication following repair. The most important of these is the initial design of systems. Hardware and software design criteria and procurement decisions can make future authentication relatively straightforward or conversely very difficult. Facility decisions can likewise ease the procedures for authentication since reliable and effective monitoring systems and tampering indicating devices can help provide the assurance needed in the integrity of such items as measurement systems, spare equipment, and reference sources. This paper will summarize the results of the U.S. Authentication Task Force discussion on the role of procedures in authentication.

  19. The LQR/LTR procedure for multivariable feedback control design

    NASA Technical Reports Server (NTRS)

    Stein, Gunter; Athans, Michael

    1987-01-01

    This paper provides a tutorial overview of the linear quadratic Gaussian with loop transfer recovery (LQG/LTR) design procedure for linear multivariable feedback systems. LQR/LTR is interpreted as the solution of a specific weighted H-squared tradeoff between transfer functions in the frequency domain. Properties of this solution are examined for both minimum-phase and nonminimum-phase systems. This leads to a formal weight augmentation procedure for the minimum-phase case which permits essentially arbitrary specification of system sensitivity functions in terms of the weights. While such arbitrary specifications are not possible for nonminimum-phase problems, a direct relationship between weights and sensitivities is developed for nonminimum-phase SISO and certain nonminimum-phase MIMO cases which guides the weight selection process.

  20. Development of iterative techniques for the solution of unsteady compressible viscous flows

    NASA Technical Reports Server (NTRS)

    Sankar, Lakshmi N.; Hixon, Duane

    1992-01-01

    A research effort was initiated at Georgia Tech in February 1991 on the development of efficient techniques for the computation of 2-D and 3-D unsteady compressible flow problems. It was found that in 2-D unsteady viscous flow applications, the generalized minimal residual (GMRES) scheme was able to significantly improve the accuracy and stability characteristics of an existing 2-D ADI (Alternating Direction Implicit) time marching scheme. That is, the GMRES/ADI combination allowed 10 to 20 times larger time steps compared to an ADI scheme. Because the GMRES algorithm requires 5 to 10 times the CPU work compared to the ADI scheme, the combined GMRES/ADI scheme yields a net factor of 2 savings in CPU cost. During the past year, we also experimented with GMRES/multigrid/ADI combination. The purpose of this combination was to compute the low frequency components of the change in the flow properties from one time step to the next on a coarse grid. This strategy reduces the memory requirements of the GMRES method roughly by a factor of 4-8 for steady flow problems.

  1. Chemistry of soil solutions

    SciTech Connect

    Elprince, A.M.

    1986-01-01

    Designed for advanced undergraduate and graduate students and researchers, this book serves as an introduction to the field of soil chemistry and associated fields such as aquatic chemistry, geochemistry, environmental chemistry, oceanography, and public health. The volume includes discussions on the structure of adsorbed water, adsorption of inorganics, solubility, redox, solute transport, chemical modeling, and sampling and monitoring the soil solution. Important papers on these topics together with editor's comments place each of the carefully chosen papers in the proper context. Because the chemistry of soil solutions requires the knowledge of many aspects of science, introductory information is provided for each topic to cover its history of development, present knowledge, and future prospects.

  2. Tsallis’ entropy maximization procedure revisited

    NASA Astrophysics Data System (ADS)

    Martínez, S.; Nicolás, F.; Pennini, F.; Plastino, A.

    2000-11-01

    The proper way of averaging is an important question with regards to Tsallis’ Thermostatistics. Three different procedures have been thus far employed in the pertinent literature. The third one, i.e., the Tsallis-Mendes-Plastino (TMP) (Physica A 261 (1998) 534) normalization procedure, exhibits clear advantages with respect to earlier ones. In this work, we advance a distinct (from the TMP-one) way of handling the Lagrange multipliers involved in the extremization process that leads to Tsallis’ statistical operator. It is seen that the new approach considerably simplifies the pertinent analysis without losing the beautiful properties of the Tsallis-Mendes-Plastino formalism.

  3. [Procedures for establishing professional liability].

    PubMed

    Budić, Nikolina

    2008-01-01

    All the greater exposure to the procedures for determining liability for the conduct of medical activity points to the need that members of the Croatian Medical Chamber know the basis for establishing liability. Therefore, it is necessary to expose the reasons why the doctors are professionals and what kind of responsibility can be determined, in which procedures it is implemented, and what are the types of possible sanctions. Croatian Medical Chamber has a special role is, as it at the same time protects the rights and represents the interests of doctors, and enforces disciplinary proceedings. PMID:19146187

  4. 1995 Procedure for nominating Fellows

    NASA Astrophysics Data System (ADS)

    In 1994, there was a new procedure for nominating members of AGU for Fellowship for 1995. The new procedure was intended to increase the number of nominees. It required an initial nomination consisting only of a one-page letter and one-page cv. The Sections could make their selections prior to developing complete nomination packages for those candidates to be forwarded to the Union Committee. The timing of the process was changed so that Section committees would have more time to develop complete packages prior to forwarding their recommendations to the Union Committee.

  5. Landsat classification accuracy assessment procedures

    USGS Publications Warehouse

    Mead, R. R.; Szajgin, John

    1982-01-01

    A working conference was held in Sioux Falls, South Dakota, 12-14 November, 1980 dealing with Landsat classification Accuracy Assessment Procedures. Thirteen formal presentations were made on three general topics: (1) sampling procedures, (2) statistical analysis techniques, and (3) examples of projects which included accuracy assessment and the associated costs, logistical problems, and value of the accuracy data to the remote sensing specialist and the resource manager. Nearly twenty conference attendees participated in two discussion sessions addressing various issues associated with accuracy assessment. This paper presents an account of the accomplishments of the conference.

  6. 48 CFR 45.202 - Evaluation procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... offeror's property management plans, methods, practices, or procedures for accounting for property are... MANAGEMENT GOVERNMENT PROPERTY Solicitation and Evaluation Procedures 45.202 Evaluation procedures. (a) The contracting officer shall consider any potentially unfair competitive advantage that may result from...

  7. Towards combined global monthly gravity field solutions

    NASA Astrophysics Data System (ADS)

    Jaeggi, Adrian; Meyer, Ulrich; Beutler, Gerhard; Weigelt, Matthias; van Dam, Tonie; Mayer-Gürr, Torsten; Flury, Jakob; Flechtner, Frank; Dahle, Christoph; Lemoine, Jean-Michel; Bruinsma, Sean

    2014-05-01

    Currently, official GRACE Science Data System (SDS) monthly gravity field solutions are generated independently by the Centre for Space Research (CSR) and the German Research Centre for Geosciences (GFZ). Additional GRACE SDS monthly fields are provided by the Jet Propulsion Laboratory (JPL) for validation and outside the SDS by a number of other institutions worldwide. Although the adopted background models and processing standards have been harmonized more and more by the various processing centers during the past years, notable differences still exist and the users are more or less left alone with a decision which model to choose for their individual applications. This procedure seriously limits the accessibility of these valuable data. Combinations are well established in the area of other space geodetic techniques, such as the Global Navigation Satellite Systems (GNSS), Satellite Laser Ranging (SLR), and Very Long Baseline Interferometry (VLBI). Regularly comparing and combining space-geodetic products has tremendously increased the usefulness of the products in a wide range of disciplines and scientific applications. Therefore, we propose in a first step to mutually compare the large variety of available monthly GRACE gravity field solutions, e.g., by assessing the signal content over selected regions, by estimating the noise over the oceans, and by performing significance tests. We make the attempt to assign different solution characteristics to different processing strategies in order to identify subsets of solutions, which are based on similar processing strategies. Using these subsets we will in a second step explore ways to generate combined solutions, e.g., based on a weighted average of the individual solutions using empirical weights derived from pair-wise comparisons. We will also assess the quality of such a combined solution and discuss the potential benefits for the GRACE and GRACE-FO user community, but also address minimum processing

  8. High speed optical metrology solution for after etch process monitoring and control

    NASA Astrophysics Data System (ADS)

    Charley, Anne-Laure; Leray, Philippe; Pypen, Wouter; Cheng, Shaunee; Verma, Alok; Mattheus, Christine; Wisse, Baukje; Cramer, Hugo; Niesing, Henk; Kruijswijk, Stefan

    2014-04-01

    Monitoring and control of the various processes in the semiconductor require precise metrology of relevant features. Optical Critical Dimension metrology (OCD) is a non-destructive solution, offering the capability to measure profiles of 2D and 3D features. OCD has an intrinsic averaging over a larger area, resulting in good precision and suppression of local variation. We have studied the feasibility of process monitoring and control in AEI (after etch inspection) applications, using the same angular resolved scatterometer as used for CD, overlay and focus metrology in ADI (after develop inspection) applications1. The sensor covers the full azimuthal-angle range and a large angle-of-incidence range in a single acquisition. The wavelength can be selected between 425nm and 700nm, to optimize for sensitivity for the parameters of interest and robustness against other process variation. In this paper we demonstrate the validity of the OCD data through the measurement and comparison with the reference metrology of multiple wafers at different steps of the imec N14 fabrication process in order to show that this high precision OCD tool can be used for process monitoring and control.

  9. Isospinning baby Skyrmion solutions

    NASA Astrophysics Data System (ADS)

    Battye, Richard A.; Haberichter, Mareike

    2013-12-01

    We perform full two-dimensional (2D) numerical relaxations of isospinning soliton solutions in the baby Skyrme model in which the global O(3) symmetry is broken by the 2D analogue of the pion mass term in the Skyrme model. In our calculations we explicitly allow the isospinning solitons to deform and to break the symmetries of the static configurations. We find that stable isospinning baby Skyrme solutions can be constructed numerically for all angular frequencies ω≤min⁡(μ,1), where μ is the mass parameter of the model. Stable, rotationally symmetric baby Skyrmion solutions for higher angular velocities are simply an artefact of the hedgehog approximation. Isospinning multisoliton solutions of topological charge B turn out to be unstable to break up into their B charge-1 constituents at some critical breakup frequency value. Furthermore, we find that for μ sufficiently large the rotational symmetry of charge-2 baby Skyrmions becomes broken at a critical angular frequency ω.

  10. The Conductivity of Solutions.

    ERIC Educational Resources Information Center

    Rayner-Canham, Geoff

    1993-01-01

    Presents historical background and modern explanations for the popular demonstration of showing conductivity of solutions through the insertion of a light-bulb conductivity tester into deionized water and water with salt in it. (PR)

  11. A computational procedure for multibody systems including flexible beam dynamics

    NASA Technical Reports Server (NTRS)

    Downer, J. D.; Park, K. C.; Chiou, J. C.

    1990-01-01

    A computational procedure suitable for the solution of equations of motions for flexible multibody systems has been developed. The flexible beams are modeled using a fully nonlinear theory which accounts for both finite rotations and large deformations. The present formulation incorporates physical measures of conjugate Cauchy stress and covariant strain increments. As a consequence, the beam model can easily be interfaced with real-time strain measurements and feedback control systems. A distinct feature of the present work is the computational preservation of total energy for undamped systems; this is obtained via an objective strain increment/stress update procedure combined with an energy-conserving time integration algorithm which contains an accurate update of angular orientations. The procedure is demonstrated via several example problems.

  12. A globalization procedure for solving nonlinear systems of equations

    NASA Astrophysics Data System (ADS)

    Shi, Yixun

    1996-09-01

    A new globalization procedure for solving a nonlinear system of equationsF(x)D0 is proposed based on the idea of combining Newton step and the steepest descent step WITHIN each iteration. Starting with an arbitrary initial point, the procedure converges either to a solution of the system or to a local minimizer off(x)D1/2F(x)TF(x). Each iteration is chosen to be as close to a Newton step as possible and could be the Newton step itself. Asymptotically the Newton step will be taken in each iteration and thus the convergence is quadratic. Numerical experiments yield positive results. Further generalizations of this procedure are also discussed in this paper.

  13. A novel hybrid (wind-photovoltaic) system sizing procedure

    SciTech Connect

    Hocaoglu, Fatih O.; Gerek, Oemer N.; Kurban, Mehmet

    2009-11-15

    Wind-photovoltaic hybrid system (WPHS) utilization is becoming popular due to increasing energy costs and decreasing prices of turbines and photovoltaic (PV) panels. However, prior to construction of a renewable generation station, it is necessary to determine the optimum number of PV panels and wind turbines for minimal cost during continuity of generated energy to meet the desired consumption. In fact, the traditional sizing procedures find optimum number of the PV modules and wind turbines subject to minimum cost. However, the optimum battery capacity is either not taken into account, or it is found by a full search between all probable solution spaces which requires extensive computation. In this study, a novel description of the production/consumption phenomenon is proposed, and a new sizing procedure is developed. Using this procedure, optimum battery capacity, together with optimum number of PV modules and wind turbines subject to minimum cost can be obtained with good accuracy. (author)

  14. Stability of diphenylalanine peptide nanotubes in solution

    NASA Astrophysics Data System (ADS)

    Andersen, Karsten Brandt; Castillo-Leon, Jaime; Hedström, Martin; Svendsen, Winnie Edith

    2011-03-01

    Over the last couple of years, self-organizing nanotubes based on the dipeptide diphenylalanine have received much attention, mainly as possible building blocks for the next generation of biosensors and as drug delivery systems. One of the main reasons for this large interest is that these peptide nanotubes are believed to be very stable both thermally and chemically. Previously, the chemical and thermal stability of self-organizing structures has been investigated after the evaporation of the solvent. However, it was recently discovered that the stability of the structures differed significantly when the tubes were in solution. It has been shown that, in solution, the peptide nanotubes can easily be dissolved in several solvents including water. It is therefore of critical importance that the stability of the nanotubes in solution and not after solvent evaporation be investigated prior to applications in which the nanotube will be submerged in liquid. The present article reports results demonstrating the instability and suggests a possible approach to a stabilization procedure, which drastically improves the stability of the formed structures. The results presented herein provide new information regarding the stability of self-organizing diphenylalanine nanotubes in solution.Over the last couple of years, self-organizing nanotubes based on the dipeptide diphenylalanine have received much attention, mainly as possible building blocks for the next generation of biosensors and as drug delivery systems. One of the main reasons for this large interest is that these peptide nanotubes are believed to be very stable both thermally and chemically. Previously, the chemical and thermal stability of self-organizing structures has been investigated after the evaporation of the solvent. However, it was recently discovered that the stability of the structures differed significantly when the tubes were in solution. It has been shown that, in solution, the peptide nanotubes can

  15. Piezoelectric Energy Harvesting Solutions

    PubMed Central

    Caliò, Renato; Rongala, Udaya Bhaskar; Camboni, Domenico; Milazzo, Mario; Stefanini, Cesare; de Petris, Gianluca; Oddo, Calogero Maria

    2014-01-01

    This paper reviews the state of the art in piezoelectric energy harvesting. It presents the basics of piezoelectricity and discusses materials choice. The work places emphasis on material operating modes and device configurations, from resonant to non-resonant devices and also to rotational solutions. The reviewed literature is compared based on power density and bandwidth. Lastly, the question of power conversion is addressed by reviewing various circuit solutions. PMID:24618725

  16. Reflectance of aqueous solutions

    NASA Technical Reports Server (NTRS)

    Querry, M. R.

    1972-01-01

    The optical properties and optical constants of water and aqueous solutions were studied to develop an accurate tabulation of graphical representations of the optical constants through a broad spectrum. Manuscripts of articles are presented concerning extinction coefficients, relative specular reflectance, and temperature effect on the water spectrum. Graphs of absolute reflectance, phase shifts, index of refraction, and extinction coefficients for water, heavy water and aqueous solutions are included.

  17. Budgetary Control Procedures for Institutions.

    ERIC Educational Resources Information Center

    Powell, Ray M.

    Budgetary control procedures for not-for-profit institutions are presented in this compilation of budgetary materials and ideas gathered at the Program for Institutional Administrators at the University of Notre Dame. Budgetary reporting and control are suggested as the most effective tools for coordinating and controlling the acquisition and use…

  18. Procedures for Handling Aerometric Data

    ERIC Educational Resources Information Center

    Akland, Gerald G.; Nehls, Gerald J.

    1973-01-01

    Applying to air quality data, procedures are presented for site characterization, method identification, data validation, and data summarization that are being established by the Environmental Protection Agency for the National Aerometric Data Bank. Topics review screening criteria, atypical results (data outliers), data accuracy and precision,…

  19. Concepts & Procedures. [SITE 2002 Section].

    ERIC Educational Resources Information Center

    Sarner, Ronald, Ed.; Mullick, Rosemary J., Ed.; Bauder, Deborah Y., Ed.

    This document contains the following full and short papers on concepts and procedures from the SITE (Society for Information Technology & Teacher Education) 2002 conference: "Exploring Minds Network" (Marino C. Alvarez and others); "Learning Communities: A Kaleidoscope of Ecological Designs" (Alain Breuleux and others); "PDA's and Research: A…

  20. Software Verification and Validation Procedure

    SciTech Connect

    Olund, Thomas S.

    2008-09-15

    This Software Verification and Validation procedure provides the action steps for the Tank Waste Information Network System (TWINS) testing process. The primary objective of the testing process is to provide assurance that the software functions as intended, and meets the requirements specified by the client. Verification and validation establish the primary basis for TWINS software product acceptance.

  1. Arkansas' Office Procedures Curriculum Guide.

    ERIC Educational Resources Information Center

    Clayton, Dean

    This curriculum guide provides teachers of office procedures classes with unit lesson plans and information about resource materials that can be examined, selected, and integrated into the instructional program. Contents are mainly established for the following two types of secondary-level programs: cooperative office education and intensive…

  2. Illustration of a Learning Procedure.

    ERIC Educational Resources Information Center

    Borghouts-van Erp, J. W. M.

    The paper describes evolution of an approach to teaching mathematically disabled and slow learning students through a Piagetian framework. It is explained that a step-by-step procedure is used to internalize material actions into mental actions via perception and verbalization. Formulae are introduced early, and emphasis is placed on promoting…

  3. Rules of Procedure for Investigation.

    ERIC Educational Resources Information Center

    National Education Association, Washington, DC. Commission on Professional Rights and Responsibilities.

    Among the functions of the Commission on Professional Rights and Responsibilities of the NEA is the investigation of cases of alleged unethical conduct by members of the teaching profession. The rules of procedure for investigations presented in this document are intended to assure all parties in a conflict of their individual rights of procedural…

  4. Motivational Procedures in School Settings.

    ERIC Educational Resources Information Center

    Klausmeier, Herbert J.

    Two concerns in education are student lack of motivation for achieving subject-matter knowledge and skills, and a high incidence of both disruptive and withdrawal behavior. The state of the art with respect to the motivational procedures teachers employ with students is in question. This paper attempts to answer by dealing with these related…

  5. The transfer of analytical procedures.

    PubMed

    Ermer, J; Limberger, M; Lis, K; Wätzig, H

    2013-11-01

    Analytical method transfers are certainly among the most discussed topics in the GMP regulated sector. However, they are surprisingly little regulated in detail. General information is provided by USP, WHO, and ISPE in particular. Most recently, the EU emphasized the importance of analytical transfer by including it in their draft of the revised GMP Guideline. In this article, an overview and comparison of these guidelines is provided. The key to success for method transfers is the excellent communication between sending and receiving unit. In order to facilitate this communication, procedures, flow charts and checklists for responsibilities, success factors, transfer categories, the transfer plan and report, strategies in case of failed transfers, tables with acceptance limits are provided here, together with a comprehensive glossary. Potential pitfalls are described such that they can be avoided. In order to assure an efficient and sustainable transfer of analytical procedures, a practically relevant and scientifically sound evaluation with corresponding acceptance criteria is crucial. Various strategies and statistical tools such as significance tests, absolute acceptance criteria, and equivalence tests are thoroughly descibed and compared in detail giving examples. Significance tests should be avoided. The success criterion is not statistical significance, but rather analytical relevance. Depending on a risk assessment of the analytical procedure in question, statistical equivalence tests are recommended, because they include both, a practically relevant acceptance limit and a direct control of the statistical risks. However, for lower risk procedures, a simple comparison of the transfer performance parameters to absolute limits is also regarded as sufficient. PMID:23978903

  6. Dynamic Assessment Procedure: A Validation.

    ERIC Educational Resources Information Center

    Bednar, Maryanne R.; Kletzien, Sharon B.

    A preliminary study investigated the value of the Dynamic Assessment Procedure (DAP) for understanding reading behaviors of at-risk high-school-age students. The study also sought to determine teacher interest in and ability to use the DAP information to develop instructional plans. Subjects, 19 students with reading difficulties enrolled in 1…

  7. Environmental Impact Assessment: A Procedure.

    ERIC Educational Resources Information Center

    Stover, Lloyd V.

    Prepared by a firm of consulting engineers, this booklet outlines the procedural "whys and hows" of assessing environmental impact, particularly for the construction industry. Section I explores the need for environmental assessment and evaluation to determine environmental impact. It utilizes a review of the National Environmental Policy Act and…

  8. Handbook on: Rights, Responsibilities, Procedures.

    ERIC Educational Resources Information Center

    Illinois State Dept. of Rehabilitation Services, Springfield.

    This handbook presents policies and procedures that affect three schools operated by the Illinois Department of Rehabilitation Services to serve students with disabilities: the Illinois Center for Rehabilitation and Education-Roosevelt, Illinois School for the Deaf, and the Illinois School for the Visually Impaired. The handbook includes…

  9. Network-Based Management Procedures.

    ERIC Educational Resources Information Center

    Buckner, Allen L.

    Network-based management procedures serve as valuable aids in organizational management, achievement of objectives, problem solving, and decisionmaking. Network techniques especially applicable to educational management systems are the program evaluation and review technique (PERT) and the critical path method (CPM). Other network charting…

  10. Discourse Analysis Procedures: Reliability Issues.

    ERIC Educational Resources Information Center

    Hux, Karen; And Others

    1997-01-01

    A study evaluated and compared four methods of assessing reliability on one discourse analysis procedure--a modified version of Damico's Clinical Discourse Analysis. The methods were Pearson product-moment correlations; interobserver agreement; Cohen's kappa; and generalizability coefficients. The strengths and weaknesses of the methods are…

  11. Current procedural terminology; a primer.

    PubMed

    Hirsch, Joshua A; Leslie-Mazwi, Thabele M; Nicola, Gregory N; Barr, Robert M; Bello, Jacqueline A; Donovan, William D; Tu, Raymond; Alson, Mark D; Manchikanti, Laxmaiah

    2015-04-01

    In 1966, The American Medical Association (AMA) working with multiple major medical specialty societies developed an iterative coding system for describing medical procedures and services using uniform language, the Current Procedural Terminology (CPT) system. The current code set, CPT IV, forms the basis of reporting most of the services performed by healthcare providers, physicians and non-physicians as well as facilities allowing effective, reliable communication among physician and other providers, third parties and patients. This coding system and its maintenance has evolved significantly since its inception, and now goes well beyond its readily perceived role in reimbursement. Additional roles include administrative management, tracking new and investigational procedures, and evolving aspects of 'pay for performance'. The system also allows for local, regional and national utilization comparisons for medical education and research. Neurointerventional specialists use CPT category I codes regularly--for example, 36,215 for first-order cerebrovascular angiography, 36,216 for second-order vessels, and 37,184 for acute stroke treatment by mechanical means. Additionally, physicians add relevant modifiers to the CPT codes, such as '-26' to indicate 'professional charge only,' or '-59' to indicate a distinct procedural service performed on the same day. PMID:24589819

  12. Program Planning Procedures Wall Chart.

    ERIC Educational Resources Information Center

    California State Dept. of Education, Sacramento. Right to Read Unit.

    These ten program planning procedure wall charts include: "Right to Read Center Data," for identifying school, grade, enrollment by grade, size of community, ethnic balance, percentage on aid for Dependent Children, and transiency rate; "Needs Assessment Summary," for information on student performance, reading program, teacher performance,…

  13. Grievance Procedures. SPEC Kit 23.

    ERIC Educational Resources Information Center

    Association of Research Libraries, Washington, DC. Office of Management Studies.

    This collection of grievance procedures from member libraries of the Association of Research Libraries (ARL) contains: (1) documents on committee approaches to grievances from University of British Columbia, Center for Research Libraries, University of Connecticut, Harvard University, Michigan State University, and University of Nebraska; (2)…

  14. Teaching Assistant Policies and Procedures.

    ERIC Educational Resources Information Center

    Wisconsin Univ., Madison.

    Policies and procedures covering graduate teaching assistants (TAs) at the University of Wisconsin-Madison are presented. A TA's duties may include classroom teaching under the direction of a faculty member, assisting in teaching classes, discussion groups, problem-solving sessions or laboratories, assisting in planning courses and developing…

  15. Concepts & Procedures. [SITE 2001 Section].

    ERIC Educational Resources Information Center

    Bauder, Deborah Y., Ed.; Mullick, Rosemary, Ed.; Sarner, Ronald, Ed.

    This document contains the following papers on concepts and procedures from the SITE (Society for Information Technology & Teacher Education) 2001 conference: "Using School District Standards To Develop Thematic Lessons for Electronic Portfolios" (Cindy L. Anderson and others); "Using Adobe Acrobat for Electronic Portfolio Development" (Helen C.…

  16. Reference Policies and Procedures Manual.

    ERIC Educational Resources Information Center

    George Mason Univ., Fairfax, VA.

    This guide to services of the reference department of Fenwick Library, George Mason University, is intended for use by staff in the department, as well as the general public. Areas covered include (1) reference desk services to users; (2) reference desk support procedures; (3) off desk services; (4) collection development, including staff…

  17. Conduction heat transfer solutions

    SciTech Connect

    VanSant, J.H.

    1983-08-01

    This text is a collection of solutions to a variety of heat conduction problems found in numerous publications, such as textbooks, handbooks, journals, reports, etc. Its purpose is to assemble these solutions into one source that can facilitate the search for a particular problem solution. Generally, it is intended to be a handbook on the subject of heat conduction. There are twelve sections of solutions which correspond with the class of problems found in each. Geometry, state, boundary conditions, and other categories are used to classify the problems. Each problem is concisely described by geometry and condition statements, and many times a descriptive sketch is also included. The introduction presents a synopsis on the theory, differential equations, and boundary conditions for conduction heat transfer. Some discussion is given on the use and interpretation of solutions. Supplementary data such as mathematical functions, convection correlations, and thermal properties are included for aiding the user in computing numerical values from the solutions. 155 figs., 92 refs., 9 tabs.

  18. 21 CFR 1270.31 - Written procedures.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... procedures prepared and followed for all significant steps in the infectious disease testing process under... procedures prepared, validated, and followed for prevention of infectious disease contamination or...

  19. 21 CFR 1270.31 - Written procedures.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... procedures prepared and followed for all significant steps in the infectious disease testing process under... procedures prepared, validated, and followed for prevention of infectious disease contamination or...

  20. 76 FR 56969 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-15

    ... Procedures (44 FR 11034; February 26, 1979); and (3) does not warrant preparation of a regulatory evaluation... Minimums and Obstacle Departure Procedures; Miscellaneous Amendments AGENCY: Federal Aviation... Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures...

  1. 76 FR 40600 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-11

    ... Policies and Procedures (44 FR 11034; February 26,1979); and (3)does not warrant preparation of a... Minimums and Obstacle Departure Procedures; Miscellaneous Amendments AGENCY: Federal Aviation... Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures...

  2. 75 FR 12977 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-18

    ... Policies and Procedures (44 FR 11034; February 26, 1979); and (3) does not warrant preparation of a... Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments AGENCY: Federal Aviation... Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures...

  3. 75 FR 9095 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-01

    ... Regulatory Policies and Procedures (44 FR 11034; February 26, 1979); and (3)does not warrant preparation of a... Minimums and Obstacle Departure Procedures; Miscellaneous Amendments AGENCY: Federal Aviation... Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures...

  4. 76 FR 1354 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-10

    ... Policies and Procedures (44 FR 11034; February 26,1979); and (3) does not warrant preparation of a... Minimums and Obstacle Departure Procedures; Miscellaneous Amendments AGENCY: Federal Aviation... Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures...

  5. 76 FR 25232 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-04

    ... Policies and Procedures (44 FR 11034; February 26,1979) ; and (3)does not warrant preparation of a... Minimums and Obstacle Departure Procedures; Miscellaneous Amendments AGENCY: Federal Aviation... Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures...

  6. 76 FR 8291 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-14

    ... Procedures (44 FR 11034; February 26,1979); and (3) does not warrant preparation of a regulatory evaluation... Minimums and Obstacle Departure Procedures; Miscellaneous Amendments AGENCY: Federal Aviation... Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures...

  7. Analytic Approximate Solution for Falkner-Skan Equation

    PubMed Central

    Marinca, Bogdan

    2014-01-01

    This paper deals with the Falkner-Skan nonlinear differential equation. An analytic approximate technique, namely, optimal homotopy asymptotic method (OHAM), is employed to propose a procedure to solve a boundary-layer problem. Our method does not depend upon small parameters and provides us with a convenient way to optimally control the convergence of the approximate solutions. The obtained results reveal that this procedure is very effective, simple, and accurate. A very good agreement was found between our approximate results and numerical solutions, which prove that OHAM is very efficient in practice, ensuring a very rapid convergence after only one iteration. PMID:24883417

  8. Solutions of differential equations in a Bernstein polynomial basis

    NASA Astrophysics Data System (ADS)

    Idrees Bhatti, M.; Bracken, P.

    2007-08-01

    An algorithm for approximating solutions to differential equations in a modified new Bernstein polynomial basis is introduced. The algorithm expands the desired solution in terms of a set of continuous polynomials over a closed interval and then makes use of the Galerkin method to determine the expansion coefficients to construct a solution. Matrix formulation is used throughout the entire procedure. However, accuracy and efficiency are dependent on the size of the set of Bernstein polynomials and the procedure is much simpler compared to the piecewise B spline method for solving differential equations. A recursive definition of the Bernstein polynomials and their derivatives are also presented. The current procedure is implemented to solve three linear equations and one nonlinear equation, and excellent agreement is found between the exact and approximate solutions. In addition, the algorithm improves the accuracy and efficiency of the traditional methods for solving differential equations that rely on much more complicated numerical techniques. This procedure has great potential to be implemented in more complex systems where there are no exact solutions available except approximations.

  9. A more efficient computational procedure for calculating the critical current of a multi-junction superconducting interferometer

    NASA Astrophysics Data System (ADS)

    Lutes, C. L.; Gershenson, M.; Schneider, R. J.

    1985-03-01

    The textbook procedure for the solution of the critical current of an N-junction superconducting interferometer is a 2N-1 dimensional steepest descent problem. A solution by this procedure is complicated by the existence of multiple local minima. The equations are reformulated to reduce the problem to a three-dimensional steepest descent problem. From this reduced equation set, a non-steepest-descent procedure is developed. This technique produces a solution by adjusting a trial critical current value until tangency between a straight line and a special error function is achieved. For a 10-junction test case, an 80-to-1 reduction in computer time was achieved.

  10. An interpretation and solution of ill-conditioned linear equations

    NASA Technical Reports Server (NTRS)

    Ojalvo, I. U.; Ting, T.

    1989-01-01

    Data insufficiency, poorly conditioned matrices and singularities in equations occur regularly in complex optimization, correlation, and interdisciplinary model studies. This work concerns itself with two methods of obtaining certain physically realistic solutions to ill-conditioned or singular algebraic systems of linear equations arising from such studies. Two efficient computational solution procedures that generally lead to locally unique solutions are presented when there is insufficient data to completely define the model, or a least-squares error formulation of this system results in an ill-conditioned system of equations. If it is assumed that a reasonable estimate of the uncertain data is available in both cases cited above, then we shall show how to obtain realistic solutions efficiently, in spite of the insufficiency of independent data. The proposed methods of solution are more efficient than singular-value decomposition for dealing with such systems, since they do not require solutions for all the non-zero eigenvalues of the coefficient matrix.

  11. Interactive Reference Point Procedure Based on the Conic Scalarizing Function

    PubMed Central

    2014-01-01

    In multiobjective optimization methods, multiple conflicting objectives are typically converted into a single objective optimization problem with the help of scalarizing functions. The conic scalarizing function is a general characterization of Benson proper efficient solutions of non-convex multiobjective problems in terms of saddle points of scalar Lagrangian functions. This approach preserves convexity. The conic scalarizing function, as a part of a posteriori or a priori methods, has successfully been applied to several real-life problems. In this paper, we propose a conic scalarizing function based interactive reference point procedure where the decision maker actively takes part in the solution process and directs the search according to her or his preferences. An algorithmic framework for the interactive solution of multiple objective optimization problems is presented and is utilized for solving some illustrative examples. PMID:24723795

  12. Efinaconazole 10% Solution

    PubMed Central

    Reece, Barry; Smith, Kathleen; Miller, Terri

    2013-01-01

    Background: Onychomycosis is a chronic condition that often requires long-term management to eradicate the causative fungus, allow a healthy nail to grow, and prevent relapse. As a successful outcome depends highly on patient adherence with treatment, a low risk of periungual skin irritation with topical medication is clinically relevant. Objectives: To study the potential for efinaconazole 10% solution and its corresponding vehicle to induce delayed contact skin sensitization and evaluate its skin irritation potential. Methods: Efinaconazole 10% solution and its vehicle were studied in 239 healthy volunteers for the potential to induce contact skin sensitization. This included a series of induction, challenge, and re-challenge phases. An additional 21-day cumulative irritation study was undertaken in 35 healthy volunteers to compare three concentrations of efinaconazole (1%, 5%, and 10%), vehicle, and positive/negative controls. Results: There was no evidence of induced contact sensitization under occlusive, semi-occlusive, and open (open rub-in) applications of efinaconazole 10% solution. Efinaconazole 1%, 5%, and 10% solutions have mean cumulative irritancy indices of 1.12, 1.26, and 1.18, respectively, where a range of >0 to ≤1 is classified as “mildly irritating.” Results were comparable to vehicle (1.04). Conclusion: Efinaconazole 10% solution did not cause contact sensitization and induced only minimal skin irritation in the studies completed. PMID:23556032

  13. Higher-order numerical solutions using cubic splines. [for partial differential equations

    NASA Technical Reports Server (NTRS)

    Rubin, S. G.; Khosla, P. K.

    1975-01-01

    A cubic spline collocation procedure has recently been developed for the numerical solution of partial differential equations. In the present paper, this spline procedure is reformulated so that the accuracy of the second-derivative approximation is improved and parallels that previously obtained for lower derivative terms. The final result is a numerical procedure having overall third-order accuracy for a non-uniform mesh and overall fourth-order accuracy for a uniform mesh. Solutions using both spline procedures, as well as three-point finite difference methods, will be presented for several model problems.-

  14. Structured programming: Principles, notation, procedure

    NASA Technical Reports Server (NTRS)

    JOST

    1978-01-01

    Structured programs are best represented using a notation which gives a clear representation of the block encapsulation. In this report, a set of symbols which can be used until binding directives are republished is suggested. Structured programming also allows a new method of procedure for design and testing. Programs can be designed top down, that is, they can start at the highest program plane and can penetrate to the lowest plane by step-wise refinements. The testing methodology also is adapted to this procedure. First, the highest program plane is tested, and the programs which are not yet finished in the next lower plane are represented by so-called dummies. They are gradually replaced by the real programs.

  15. A thermodynamically compatible splitting procedure in hyperelasticity

    NASA Astrophysics Data System (ADS)

    Favrie, N.; Gavrilyuk, S.; Ndanou, S.

    2014-08-01

    A material is hyperelastic if the stress tensor is obtained by variation of the stored energy function. The corresponding 3D mathematical model of hyperelasticity written in the Eulerian coordinates represents a system of 14 conservative partial differential equations submitted to stationary differential constraints. A classical approach for numerical solving of such a 3D system is a geometrical splitting: the 3D system is split into three 1D systems along each spatial direction and solved then by using a Godunov type scheme. Each 1D system has 7 independent eigenfields corresponding to contact discontinuity, longitudinal waves and shear waves. The construction of the corresponding Riemann solvers is not an easy task even in the case of isotropic solids. Indeed, for a given specific energy it is extremely difficult, if not impossible, to check its rank-one convexity which is a necessary and sufficient condition for hyperbolicity of the governing equations. In this paper, we consider a particular case where the specific energy is a sum of two terms. The first term is the hydrodynamic energy depending only on the density and the entropy, and the second term is the shear energy which is unaffected by the volume change. In this case a very simple criterion of hyperbolicity can be formulated. We propose then a new splitting procedure which allows us to find a numerical solution of each 1D system by solving successively three 1D sub-systems. Each sub-system is hyperbolic, if the full system is hyperbolic. Moreover, each sub-system has only three waves instead of seven, and the velocities of these waves are given in explicit form. The last property allows us to construct reliable Riemann solvers. Numerical 1D tests confirm the advantage of the new approach. A multi-dimensional extension of the splitting procedure is also proposed.

  16. Streptococcal meningitis following myelogram procedures.

    PubMed

    Hsu, Jennifer; Jensen, Bette; Arduino, Matthew; Bergeron, Toni; Fox, Teresa; Gum, Greg; Pischke, Vera; Potts, David; Townes, John; Srinivasan, Arjun

    2007-05-01

    In September of 2004, we investigated 7 cases of post-myelography meningitis. Streptococcal species were recovered from blood or cerebrospinal fluid in all cases. Our findings suggest that droplet transmission of the oral flora of the clinician performing the procedure was the most likely source of these infections. The Centers for Disease Control and Prevention recommends the use of face masks by those performing myelograms. PMID:17464927

  17. Cytoreductive Surgery and Peritonectomy Procedures.

    PubMed

    Mehta, Sanket S; Bhatt, Aditi; Glehen, Olivier

    2016-06-01

    Cytoreductive surgery (CRS) and hyperthermic intraperitoneal chemotherapy (HIPEC) has become widely accepted as an effective method of treating peritoneal metastases (PM) from various cancers. CRS performed with the goal of removing all the macroscopic disease and comprises of peritonectomy procedures and visceral resections. CRS is a technically challenging surgery that requires a considerable amount of skill and appropriate patient selection. This article is a review of the techniques and current recommendations for performing CRS. PMID:27065704

  18. Feline onychectomy and elective procedures.

    PubMed

    Young, William Phillip

    2002-05-01

    The development of the carbon dioxide (CO2) surgical laser has given veterinarians a new perspective in the field of surgery. Recently developed techniques and improvisations of established procedures have opened the field of surgery to infinite applications never before dreamed of as little as 10 years ago. Today's CO2 surgical laser is an adaptable, indispensable tool for the everyday veterinary practitioner. Its use is becoming a common occurrence in offices of veterinarians around the world. PMID:12064043

  19. Cost analysis for procedure comparisons.

    PubMed

    Trowers, E A; Batra, S C; Buessler, J; Anderson, L K

    1995-01-01

    Using the methodology of activity-based costing as a conceptual framework, the authors present the potential cost reduction of a new office routine and a medical procedure. The costs of a new instrument for colorectal cancer screening and a new surveying and follow-up of at-risk patients show that time and relevant costs in the G.I Clinic and G.I Endoscopy Lab were significantly reduced. PMID:10153384

  20. Surface Environmental Surveillance Procedures Manual

    SciTech Connect

    RW Hanf; TM Poston

    2000-09-20

    Environmental surveillance data are used in assessing the impact of current and past site operations on human health and the environment, demonstrating compliance with applicable local, state, and federal environmental regulations, and verifying the adequacy of containment and effluent controls. SESP sampling schedules are reviewed, revised, and published each calendar year in the Hanford Site Environmental Surveillance Master Sampling Schedule. Environmental samples are collected by SESP staff in accordance with the approved sample collection procedures documented in this manual.

  1. 48 CFR 2813.7002 - Procedure.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Contract Types SIMPLIFIED ACQUISITION PROCEDURES Certified Invoice Procedure 2813.7002 Procedure. (a) Purchases utilizing the certified invoice procedure shall be effected only in accordance with FAR part 13...; (3) Appropriate invoices can be obtained from the supplier; and, (4) The items to be purchased...

  2. 47 CFR 1.1121 - Billing procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Billing procedures. 1.1121 Section 1.1121 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Schedule of Statutory Charges and Procedures for Payment § 1.1121 Billing procedures. (a) The fees required for the...

  3. 16 CFR 1.2 - Procedure.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Procedure. 1.2 Section 1.2 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL PROCEDURES Industry Guidance Advisory Opinions § 1.2 Procedure. (a) Application. The request for advice...

  4. 40 CFR 92.506 - Test procedures.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 20 2014-07-01 2013-07-01 true Test procedures. 92.506 Section 92.506... and Audit Programs § 92.506 Test procedures. (a)(1) For locomotives and locomotive engines subject to the provisions of this subpart, the prescribed test procedures are those procedures described...

  5. 10 CFR 766.105 - Payment procedures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Payment procedures. 766.105 Section 766.105 Energy DEPARTMENT OF ENERGY URANIUM ENRICHMENT DECONTAMINATION AND DECOMMISSIONING FUND; PROCEDURES FOR SPECIAL ASSESSMENT OF DOMESTIC UTILITIES Procedures for Special Assessment § 766.105 Payment procedures. DOE...

  6. 10 CFR 766.105 - Payment procedures.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Payment procedures. 766.105 Section 766.105 Energy DEPARTMENT OF ENERGY URANIUM ENRICHMENT DECONTAMINATION AND DECOMMISSIONING FUND; PROCEDURES FOR SPECIAL ASSESSMENT OF DOMESTIC UTILITIES Procedures for Special Assessment § 766.105 Payment procedures. DOE...

  7. 10 CFR 766.105 - Payment procedures.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Payment procedures. 766.105 Section 766.105 Energy DEPARTMENT OF ENERGY URANIUM ENRICHMENT DECONTAMINATION AND DECOMMISSIONING FUND; PROCEDURES FOR SPECIAL ASSESSMENT OF DOMESTIC UTILITIES Procedures for Special Assessment § 766.105 Payment procedures. DOE...

  8. 10 CFR 766.105 - Payment procedures.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Payment procedures. 766.105 Section 766.105 Energy DEPARTMENT OF ENERGY URANIUM ENRICHMENT DECONTAMINATION AND DECOMMISSIONING FUND; PROCEDURES FOR SPECIAL ASSESSMENT OF DOMESTIC UTILITIES Procedures for Special Assessment § 766.105 Payment procedures. DOE...

  9. 10 CFR 766.105 - Payment procedures.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Payment procedures. 766.105 Section 766.105 Energy DEPARTMENT OF ENERGY URANIUM ENRICHMENT DECONTAMINATION AND DECOMMISSIONING FUND; PROCEDURES FOR SPECIAL ASSESSMENT OF DOMESTIC UTILITIES Procedures for Special Assessment § 766.105 Payment procedures. DOE...

  10. 49 CFR 193.2903 - Security procedures.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Security procedures. 193.2903 Section 193.2903...: FEDERAL SAFETY STANDARDS Security § 193.2903 Security procedures. Each operator shall prepare and follow one or more manuals of written procedures to provide security for each LNG plant. The procedures...

  11. 12 CFR 303.42 - Filing procedures.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 4 2011-01-01 2011-01-01 false Filing procedures. 303.42 Section 303.42 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION PROCEDURE AND RULES OF PRACTICE FILING PROCEDURES Establishment and Relocation of Domestic Branches and Offices § 303.42 Filing procedures. (a) General. An applicant shall submit an application to...

  12. 19 CFR 351.221 - Review procedures.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 3 2011-04-01 2011-04-01 false Review procedures. 351.221 Section 351.221 Customs... Antidumping and Countervailing Duty Procedures § 351.221 Review procedures. (a) Introduction. The procedures for reviews are similar to those followed in investigations. This section details the...

  13. 22 CFR 226.44 - Procurement procedures.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Procurement procedures. 226.44 Section 226.44...-GOVERNMENTAL ORGANIZATIONS Post-award Requirements Procurement Standards § 226.44 Procurement procedures. (a) All recipients shall establish written procurement procedures. These procedures shall provide, at...

  14. 31 CFR 510.801 - Procedures

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Procedures 510.801 Section 510.801 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY NORTH KOREA SANCTIONS REGULATIONS Procedures § 510.801 Procedures For license application procedures...

  15. 44 CFR 78.14 - Alternative procedures.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 44 Emergency Management and Assistance 1 2013-10-01 2013-10-01 false Alternative procedures. 78.14... ASSISTANCE § 78.14 Alternative procedures. For the purposes of this part, alternative procedures are... alternative procedures are available in the following circumstances. Native American tribes or...

  16. 44 CFR 78.14 - Alternative procedures.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 44 Emergency Management and Assistance 1 2011-10-01 2011-10-01 false Alternative procedures. 78.14... ASSISTANCE § 78.14 Alternative procedures. For the purposes of this part, alternative procedures are... alternative procedures are available in the following circumstances. Native American tribes or...

  17. 44 CFR 78.14 - Alternative procedures.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 44 Emergency Management and Assistance 1 2012-10-01 2011-10-01 true Alternative procedures. 78.14... ASSISTANCE § 78.14 Alternative procedures. For the purposes of this part, alternative procedures are... alternative procedures are available in the following circumstances. Native American tribes or...

  18. 16 CFR 1.20 - Alternative procedures.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Alternative procedures. 1.20 Section 1.20 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL PROCEDURES Rules and Rulemaking Under Section 18(a)(1)(B) of the FTC Act § 1.20 Alternative procedures....

  19. 16 CFR 1.20 - Alternative procedures.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Alternative procedures. 1.20 Section 1.20 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL PROCEDURES Rules and Rulemaking Under Section 18(a)(1)(B) of the FTC Act § 1.20 Alternative procedures....

  20. 16 CFR 1.20 - Alternative procedures.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Alternative procedures. 1.20 Section 1.20 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL PROCEDURES Rules and Rulemaking Under Section 18(a)(1)(B) of the FTC Act § 1.20 Alternative procedures....

  1. 16 CFR 1.20 - Alternative procedures.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Alternative procedures. 1.20 Section 1.20 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL PROCEDURES Rules and Rulemaking Under Section 18(a)(1)(B) of the FTC Act § 1.20 Alternative procedures....

  2. 44 CFR 78.14 - Alternative procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Alternative procedures. 78.14... ASSISTANCE § 78.14 Alternative procedures. For the purposes of this part, alternative procedures are... alternative procedures are available in the following circumstances. Native American tribes or...

  3. 16 CFR 1.20 - Alternative procedures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Alternative procedures. 1.20 Section 1.20 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL PROCEDURES Rules and Rulemaking Under Section 18(a)(1)(B) of the FTC Act § 1.20 Alternative procedures....

  4. 44 CFR 78.14 - Alternative procedures.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 44 Emergency Management and Assistance 1 2014-10-01 2014-10-01 false Alternative procedures. 78.14... ASSISTANCE § 78.14 Alternative procedures. For the purposes of this part, alternative procedures are... alternative procedures are available in the following circumstances. Native American tribes or...

  5. 49 CFR 601.47 - Review Procedures.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 7 2011-10-01 2011-10-01 false Review Procedures. 601.47 Section 601.47 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ORGANIZATION, FUNCTIONS, AND PROCEDURES Emergency Procedures for Public Transportation Systems § 601.47 Review Procedures....

  6. 40 CFR 154.34 - Expedited procedures.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Expedited procedures. 154.34 Section 154.34 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS SPECIAL REVIEW PROCEDURES Procedures § 154.34 Expedited procedures. (a) The Agency may elect to issue...

  7. 10 CFR 820.63 - Procedures.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Procedures. 820.63 Section 820.63 Energy DEPARTMENT OF ENERGY PROCEDURAL RULES FOR DOE NUCLEAR ACTIVITIES Exemption Relief § 820.63 Procedures. The Secretarial Officer shall utilize any procedures deemed necessary and appropriate to comply with his...

  8. 10 CFR 820.63 - Procedures.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Procedures. 820.63 Section 820.63 Energy DEPARTMENT OF ENERGY PROCEDURAL RULES FOR DOE NUCLEAR ACTIVITIES Exemption Relief § 820.63 Procedures. The Secretarial Officer shall utilize any procedures deemed necessary and appropriate to comply with his...

  9. 10 CFR 820.63 - Procedures.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Procedures. 820.63 Section 820.63 Energy DEPARTMENT OF ENERGY PROCEDURAL RULES FOR DOE NUCLEAR ACTIVITIES Exemption Relief § 820.63 Procedures. The Secretarial Officer shall utilize any procedures deemed necessary and appropriate to comply with his...

  10. 10 CFR 820.63 - Procedures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Procedures. 820.63 Section 820.63 Energy DEPARTMENT OF ENERGY PROCEDURAL RULES FOR DOE NUCLEAR ACTIVITIES Exemption Relief § 820.63 Procedures. The Secretarial Officer shall utilize any procedures deemed necessary and appropriate to comply with his...

  11. 42 CFR 488.110 - Procedural guidelines.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 5 2011-10-01 2011-10-01 false Procedural guidelines. 488.110 Section 488.110 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION SURVEY, CERTIFICATION, AND ENFORCEMENT PROCEDURES SURVEY FORMS AND PROCEDURES § 488.110 Procedural guidelines....

  12. 5 CFR 1201.73 - Discovery procedures.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 5 Administrative Personnel 3 2014-01-01 2014-01-01 false Discovery procedures. 1201.73 Section... AND PROCEDURES Procedures for Appellate Cases Discovery § 1201.73 Discovery procedures. (a) Initiating discovery. A party seeking discovery must start the process by serving a request for discovery on...

  13. 47 CFR 2.1041 - Measurement procedure.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 1 2013-10-01 2013-10-01 false Measurement procedure. 2.1041 Section 2.1041... RULES AND REGULATIONS Equipment Authorization Procedures Certification § 2.1041 Measurement procedure. For equipment operating under parts 15 and 18, the measurement procedures are specified in the...

  14. 47 CFR 2.1041 - Measurement procedure.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 1 2012-10-01 2012-10-01 false Measurement procedure. 2.1041 Section 2.1041... RULES AND REGULATIONS Equipment Authorization Procedures Certification § 2.1041 Measurement procedure. For equipment operating under parts 15 and 18, the measurement procedures are specified in the...

  15. 47 CFR 2.1041 - Measurement procedure.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 1 2011-10-01 2011-10-01 false Measurement procedure. 2.1041 Section 2.1041... RULES AND REGULATIONS Equipment Authorization Procedures Certification § 2.1041 Measurement procedure. For equipment operating under parts 15 and 18, the measurement procedures are specified in the...

  16. 47 CFR 2.1041 - Measurement procedure.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Measurement procedure. 2.1041 Section 2.1041... RULES AND REGULATIONS Equipment Authorization Procedures Certification § 2.1041 Measurement procedure. For equipment operating under parts 15 and 18, the measurement procedures are specified in the...

  17. 47 CFR 2.1041 - Measurement procedure.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 1 2014-10-01 2014-10-01 false Measurement procedure. 2.1041 Section 2.1041... RULES AND REGULATIONS Equipment Authorization Procedures Certification § 2.1041 Measurement procedure. For equipment operating under parts 15 and 18, the measurement procedures are specified in the...

  18. 12 CFR 303.161 - Filing procedures.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 5 2014-01-01 2014-01-01 false Filing procedures. 303.161 Section 303.161 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION PROCEDURE AND RULES OF PRACTICE FILING PROCEDURES Mutual-To-Stock Conversions § 303.161 Filing procedures. (a) Prior notice required. In addition to complying with the substantive requirements in...

  19. 12 CFR 303.121 - Filing procedures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Filing procedures. 303.121 Section 303.121 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION PROCEDURE AND RULES OF PRACTICE FILING PROCEDURES Activities of Insured State Banks § 303.121 Filing procedures. (a) Where to file. A notice...

  20. 49 CFR 193.2903 - Security procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Security procedures. 193.2903 Section 193.2903...: FEDERAL SAFETY STANDARDS Security § 193.2903 Security procedures. Each operator shall prepare and follow one or more manuals of written procedures to provide security for each LNG plant. The procedures...

  1. 49 CFR 193.2903 - Security procedures.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Security procedures. 193.2903 Section 193.2903...: FEDERAL SAFETY STANDARDS Security § 193.2903 Security procedures. Each operator shall prepare and follow one or more manuals of written procedures to provide security for each LNG plant. The procedures...

  2. 10 CFR 431.154 - Test procedures.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Test procedures. 431.154 Section 431.154 Energy DEPARTMENT... EQUIPMENT Commercial Clothers Washers Test Procedures § 431.154 Test procedures. The test procedures for residential clothes washers in Appendix J1 to subpart B of part 430 of this title shall be used to...

  3. 40 CFR 89.508 - Test procedures.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 21 2013-07-01 2013-07-01 false Test procedures. 89.508 Section 89.508... Test procedures. (a)(1) For nonroad engines subject to the provisions of this subpart, the prescribed test procedures are the nonroad engine 8-mode test procedure as described in subpart E of this...

  4. 16 CFR 1.2 - Procedure.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Procedure. 1.2 Section 1.2 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL PROCEDURES Industry Guidance Advisory Opinions § 1.2 Procedure. (a) Application. The request for advice...

  5. 45 CFR 605.61 - Procedures.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 45 Public Welfare 3 2013-10-01 2013-10-01 false Procedures. 605.61 Section 605.61 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL SCIENCE FOUNDATION NONDISCRIMINATION ON THE BASIS OF HANDICAP IN PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Procedures § 605.61 Procedures. The procedural...

  6. 45 CFR 605.61 - Procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Procedures. 605.61 Section 605.61 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL SCIENCE FOUNDATION NONDISCRIMINATION ON THE BASIS OF HANDICAP IN PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Procedures § 605.61 Procedures. The procedural...

  7. 45 CFR 605.61 - Procedures.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 45 Public Welfare 3 2012-10-01 2012-10-01 false Procedures. 605.61 Section 605.61 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL SCIENCE FOUNDATION NONDISCRIMINATION ON THE BASIS OF HANDICAP IN PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Procedures § 605.61 Procedures. The procedural...

  8. 28 CFR 40.8 - Emergency procedure.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 28 Judicial Administration 1 2011-07-01 2011-07-01 false Emergency procedure. 40.8 Section 40.8... for Inmate Grievance Procedures § 40.8 Emergency procedure. The grievance procedure shall contain special provision for responding to grievances of an emergency nature. Emergency grievances shall...

  9. 28 CFR 40.8 - Emergency procedure.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Emergency procedure. 40.8 Section 40.8... for Inmate Grievance Procedures § 40.8 Emergency procedure. The grievance procedure shall contain special provision for responding to grievances of an emergency nature. Emergency grievances shall...

  10. Procedural Messages in Small Group Interaction.

    ERIC Educational Resources Information Center

    Putnam, Linda L.

    Three studies were conducted to ascertain the relationship between predisposition for group work climate and the types of procedural messages that group members employ. In the studies, expectations about group work procedures fell into two categories: high procedural order (HPO) and low procedural order (LPO). Each category consisted of four…

  11. 21 CFR 1271.180 - Procedures.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Procedures. 1271.180 Section 1271.180 Food and... CELLULAR AND TISSUE-BASED PRODUCTS Current Good Tissue Practice § 1271.180 Procedures. (a) General. You... and approve these procedures. (c) Availability. These procedures must be readily available to...

  12. 9 CFR 318.311 - Recall procedure.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Recall procedure. 318.311 Section 318... Products § 318.311 Recall procedure. Establishments shall prepare and maintain a current procedure for the recall of all canned product covered by this subpart. Upon request, the recall procedure shall be...

  13. 9 CFR 318.311 - Recall procedure.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Recall procedure. 318.311 Section 318... Products § 318.311 Recall procedure. Establishments shall prepare and maintain a current procedure for the recall of all canned product covered by this subpart. Upon request, the recall procedure shall be...

  14. 9 CFR 318.311 - Recall procedure.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Recall procedure. 318.311 Section 318... Products § 318.311 Recall procedure. Establishments shall prepare and maintain a current procedure for the recall of all canned product covered by this subpart. Upon request, the recall procedure shall be...

  15. 9 CFR 318.311 - Recall procedure.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Recall procedure. 318.311 Section 318... Products § 318.311 Recall procedure. Establishments shall prepare and maintain a current procedure for the recall of all canned product covered by this subpart. Upon request, the recall procedure shall be...

  16. 9 CFR 318.311 - Recall procedure.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Recall procedure. 318.311 Section 318... Products § 318.311 Recall procedure. Establishments shall prepare and maintain a current procedure for the recall of all canned product covered by this subpart. Upon request, the recall procedure shall be...

  17. 16 CFR 1.2 - Procedure.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Procedure. 1.2 Section 1.2 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL PROCEDURES Industry Guidance Advisory Opinions § 1.2 Procedure. (a) Application. The request for advice...

  18. 16 CFR 1.2 - Procedure.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Procedure. 1.2 Section 1.2 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL PROCEDURES Industry Guidance Advisory Opinions § 1.2 Procedure. (a) Application. The request for advice...

  19. 16 CFR 1.2 - Procedure.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Procedure. 1.2 Section 1.2 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL PROCEDURES Industry Guidance Advisory Opinions § 1.2 Procedure. (a) Application. The request for advice...

  20. 20 CFR 702.394 - Appeals; procedure.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 20 Employees' Benefits 3 2011-04-01 2011-04-01 false Appeals; procedure. 702.394 Section 702.394 Employees' Benefits OFFICE OF WORKERS' COMPENSATION PROGRAMS, DEPARTMENT OF LABOR LONGSHOREMEN'S AND HARBOR WORKERS' COMPENSATION ACT AND RELATED STATUTES ADMINISTRATION AND PROCEDURE Adjudication Procedures Appeals § 702.394 Appeals; procedure....

  1. Policy and procedure manual: keeping a high quality manual.

    PubMed

    Sulzbach, L M; Stivale, D A

    1990-12-01

    Policy and procedure manuals are now commonly used in hospitals. The policy and procedure manual provides critical care nurses with a wealth of information. Policies are developed to guide the staff to perform nursing care adequately. Together policies and the corresponding procedures let critical care nurses know how to proceed to meet the organisation and the unit goals. As critical care expands the number of policies increases, which may make it more difficult to find a specific policy quickly. Critical care nurses need to look at other solutions for communicating some necessary pieces of information and check to make sure that policy is stated briefly, to the point and logical. It is also necessary to check to see if the information included in the manual is policy and associated procedures. If it is drug information, equipment usage, standards of care, or patient/family teaching material it could be incorporated in a different format or separate manual. As care givers nurses must monitor policies and procedures that are written and make sure they are simple to read, logically written, and easy to find. PMID:2273237

  2. Isolated Chylopericardium after Intrapericardial Procedures

    PubMed Central

    Kan, Chung-Dann; Wang, Jieh-Neng; Wu, Jing-Ming; Yang, Yu-Jen

    2007-01-01

    Chylopericardium after an intrapericardial procedure is rare, and satisfactory explanations of its possible causes are lacking. Herein, we present 4 cases of chylopericardium that developed after intrapericardial surgery, and we review the literature. Our literature review revealed 29 cases of chylopericardium that complicated intrapericardial operations, to which we added our 4 cases for analysis. The 33 surgical procedures involved repair for congenital heart disease (n=21), valve surgery (n=5), coronary artery bypass grafting (n=6), and other (n=1). Causes were verified in 7 patients: small lymphatic injury in 3 and high venous pressure or venous thrombosis in 4. Of the 26 patients with chylopericardium of unknown origin, 15 had congenital heart disease. Ten of these 15 had chromosomal abnormalities, especially trisomy 21 (Down syndrome); these patients typically had increased lymphatic permeability, which raised the likelihood of chylopericardium. Five revascularizations for coronary artery disease required harvesting of the left internal thoracic artery for reconstruction, incurring a risk of damage to the drainage site of the right efferent lymphatic trunk. In addition, all 26 patients with chylopericardium of unknown origin underwent dissection of the ascending aorta and the main pulmonary artery, near the right efferent lymphatic trunk. Inadvertent injury to the trunk during the dissection would have increased the risk of chylopericardium. Accordingly, even though the overall incidence of chylopericardium during intrapericardial procedures is low, we recommend a meticulous dissection of the ascending aorta from the main pulmonary artery. PMID:17420799

  3. Development of cardioplegic solution without potassium: experimental study in rat

    PubMed Central

    Reichert, Karla; do Carmo, Helison Rafael Pereira; Lima, Fany; Torina, Anali Galluce; Vilarinho, Karlos Alexandre de Souza; de Oliveira, Pedro Paulo Martins; Silveira Filho, Lindemberg Mota; Severino, Elaine Soraya Barbosa de Oliveira; Petrucci, Orlando

    2013-01-01

    Introduction Myocardial preservation during open heart surgeries and harvesting for transplant are of great importance. The heart at the end of procedure has to resume its functions as soon as possible. All cardioplegic solutions are based on potassium for induction of cardioplegic arrest. Objective To assess a cardioplegic solution with no potassium addition to the formula with two other commercially available cardioplegic solutions. The comparative assessment was based on cytotoxicity, adenosine triphosphate myocardial preservation, and caspase 3 activity. The tested solution (LIRM) uses low doses of sodium channel blocker (lidocaine), potassium channel opener (cromakalin), and actin/myosin cross bridge inhibitor (2,3-butanedione monoxime). Methods Wistar rats underwent thoracotomy under mechanical ventilation and three different solutions were used for "in situ" perfusion for cardioplegic arrest induction: Custodiol (HTK), Braile (G/A), and LIRM solutions. After cardiac arrest, the hearts were excised and kept in cold storage for 4 hours. After this period, the hearts were assessed with optical light microscopy, myocardial ATP content and caspase 3 activity. All three solutions were evaluated for direct cytotoxicity with L929 and WEHI-164 cells. Results The ATP content was higher in the Custodiol group compared to two other solutions (P<0.05). The caspase activity was lower in the HTK group compared to LIRM and G/A solutions (P<0.01). The LIRM solution showed lower caspase activity compared to Braile solution (P<0.01). All solutions showed no cytotoxicity effect after 24 hours of cells exposure to cardioplegic solutions. Conclusion Cardioplegia solutions without potassium are promised and aminoacid addition might be an interesting strategy. More evaluation is necessary for an optimal cardioplegic solution development. PMID:24598959

  4. Broadcasting satellite service synthesis using gradient and cyclic coordinate search procedures

    NASA Technical Reports Server (NTRS)

    Reilly, C. H.; Mount-Campbell, C. A.; Gonsalvez, D. J.; Martin, C. H.; Levis, C. A.

    1986-01-01

    Two search techniques are considered for solving satellite synthesis problems. Neither is likely to find a globally optimal solution. In order to determine which method performs better and what factors affect their performance, an experiment is designed and the same problem is solved under a variety of starting solution configuration-algorithm combinations. Since there is no randomization in the experiment, results of practical, rather than statistical, significance are presented. Implementation of a cyclic coordinate search procedure clearly finds better synthesis solutions than implementation of a gradient search procedure does with the objective of maximizing the minimum C/I ratio computed at test points on the perimeters of the intended service areas. The length of the available orbital arc and the configuration of the starting solution are shown to affect the quality of the solutions found.

  5. Broadcasting satellite service synthesis using gradient and cyclic coordinate search procedures

    NASA Technical Reports Server (NTRS)

    Reilly, C. H.; Mount-Campbell, C. A.; Gonsalvez, D. J.; Martin, C. H.; Levis, C. A.; Wang, C. W.

    1986-01-01

    Two search techniques are considered for solving satellite synthesis problems. Neither is likely to find a globally optimal solution. In order to determine which method performs better and what factors affect their performance, we design an experiment and solve the same problem under a variety of starting solution configuration-algorithm combinations. Since there is no randomization in the experiment, we present results of practical, rather than statistical, significance. Our implementation of a cyclic coordinate search procedure clearly finds better synthesis solutions than our implementation of a gradient search procedure does with our objective of maximizing the minimum C/I ratio computed at test points on the perimeters of the intended service areas. The length of the available orbital arc and the configuration of the starting solution are shown to affect the quality of the solutions found.

  6. Decontamination solution development studies

    SciTech Connect

    Allen, R.P.; Fetrow, L.K.; Kjarmo, H.E.; Pool, K.H.

    1993-09-01

    This study was conducted for the Westinghouse Hanford Company (WHC) by Pacific Northwest Laboratory (PNL) as part of the Hanford Grout Technology Program (HGTP). The objective of this study was to identify decontamination solutions capable of removing radioactive contaminants and grout from the Grout Treatment Facility (GTF) process equipment and to determine the impact of these solutions on equipment components and disposal options. The reference grout used in this study was prepared with simulated double-shell slurry feed (DSSF) and a dry blend consisting of 40 wt % limestone flour, 28 wt % blast furnace slag, 28 wt % fly ash, and 4 wt % type I/II Portland cement.

  7. Plutonium in Concentrated Solutions

    SciTech Connect

    Clark, Sue B.; Delegard, Calvin H.

    2002-08-01

    Complex, high ionic strength media are used throughout the plutonium cycle, from its processing and purification in nitric acid, to waste storage and processing in alkaline solutions of concentrated electrolytes, to geologic disposal in brines. Plutonium oxidation/reduction, stability, radiolysis, solution and solid phase chemistry have been studied in such systems. In some cases, predictive models for describing Pu chemistry under such non-ideal conditions have been developed, which are usually based on empirical databases describing specific ion interactions. In Chapter 11, Non-Ideal Systems, studies on the behavior of Pu in various complex media and available model descriptions are reviewed.

  8. Dimensionally continued wormhole solutions

    SciTech Connect

    Li, X. School of Science, East China University of Science Technology, Shanghai 200237 )

    1994-09-15

    In this paper we consider wormhole solutions for the action of special Lovelock gravity'' recently discussed by Banados, Teitelboim, and Zanelli. This action is, in odd dimensions, the Chern-Simons form for the anti--de Sitter group and, in even dimensions, the Euler density constructed with the Lorentz part of the anti--de Sitter curvature tensor. We present a systematic study of classical wormhole solutions in the special Lovelock theory with various matter content, including a perfect fluid energy-momentum tensor, axionic field, and conformal scalar field.

  9. Fissile solution measurement apparatus

    DOEpatents

    Crane, T.W.; Collinsworth, P.R.

    1984-06-11

    An apparatus for determining the content of a fissile material within a solution by detecting delayed fission neutrons emitted by the fissile material after it is temporarily irradiated by a neutron source. The apparatus comprises a container holding the solution and having a portion defining a neutron source cavity centrally disposed within the container. The neutron source cavity temporarily receives the neutron source. The container has portions defining a plurality of neutron detector ports that form an annular pattern and surround the neutron source cavity. A plurality of neutron detectors count delayed fission neutrons emitted by the fissile material. Each neutron detector is located in a separate one of the neutron detector ports.

  10. Compound estimation procedures in reliability

    NASA Technical Reports Server (NTRS)

    Barnes, Ron

    1990-01-01

    At NASA, components and subsystems of components in the Space Shuttle and Space Station generally go through a number of redesign stages. While data on failures for various design stages are sometimes available, the classical procedures for evaluating reliability only utilize the failure data on the present design stage of the component or subsystem. Often, few or no failures have been recorded on the present design stage. Previously, Bayesian estimators for the reliability of a single component, conditioned on the failure data for the present design, were developed. These new estimators permit NASA to evaluate the reliability, even when few or no failures have been recorded. Point estimates for the latter evaluation were not possible with the classical procedures. Since different design stages of a component (or subsystem) generally have a good deal in common, the development of new statistical procedures for evaluating the reliability, which consider the entire failure record for all design stages, has great intuitive appeal. A typical subsystem consists of a number of different components and each component has evolved through a number of redesign stages. The present investigations considered compound estimation procedures and related models. Such models permit the statistical consideration of all design stages of each component and thus incorporate all the available failure data to obtain estimates for the reliability of the present version of the component (or subsystem). A number of models were considered to estimate the reliability of a component conditioned on its total failure history from two design stages. It was determined that reliability estimators for the present design stage, conditioned on the complete failure history for two design stages have lower risk than the corresponding estimators conditioned only on the most recent design failure data. Several models were explored and preliminary models involving bivariate Poisson distribution and the

  11. Recent Developments in the Dorfman-Berbaum-Metz Procedure for Multireader ROC Study Analysis

    PubMed Central

    Hillis, Stephen L.; Berbaum, Kevin S.; Metz, Charles E.

    2009-01-01

    Rationale and Objectives The Dorfman-Berbaum-Metz (DBM) method has been one of the most popular methods for analyzing multireader receiver operating characteristic (ROC) studies since it was proposed in 1992. Despite its popularity, the original procedure has several drawbacks: it is limited to jackknife accuracy estimates, it is substantially conservative, and it is not based on a satisfactory conceptual or theoretical model. Recently, solutions to these problems have been presented in three papers. Our purpose is to summarize and provide an overview of these recent developments. Materials and Methods We present and discuss the recently proposed solutions for the various drawbacks of the original DBM method. Results We compare the solutions in a simulation study and find that they result in improved performance for the DBM procedure. We also compare the solutions using two real data studies and find that the modified DBM procedure that incorporates these solutions yields more significant results and clearer interpretations of the variance component parameters than the original DBM procedure. Conclusions We recommend using the modified DBM procedure that incorporates the recent developments. PMID:18423323

  12. National Ignition Facility (NIF) operations procedures plan

    SciTech Connect

    Mantrom, D.

    1998-05-06

    The purpose of this Operations Procedures Plan is to establish a standard procedure which outlines how NIF Operations procedures will be developed (i.e , written, edited, reviewed, approved, published, revised) and accessed by the NIF Operations staff who must use procedures in order to accomplish their tasks. In addition, this Plan is designed to provide a guide to the NIF Project staff to assist them in planning and writing procedures. Also, resource and scheduling information is provided.

  13. Cells and Hypotonic Solutions.

    ERIC Educational Resources Information Center

    Bery, Julia

    1985-01-01

    Describes a demonstration designed to help students better understand the response of plant and animal cells to hypotonic solutions. The demonstration uses a balloon inside a flexible, thin-walled cardboard box. Air going in corresponds to water entering by osmosis, and, like real cells, if stretched enough, the balloon will burst. (DH)

  14. Maintenance Crisis vs Solutions.

    ERIC Educational Resources Information Center

    Haggard, Susie

    Industrial maintenance in Northeast Georgia is facing an acute crisis. Contributing factors are economic development that is depleting the work force, aging of the population, downsizing of the military, and lack of technical school graduates. Solutions to the crisis fall into three categories: short-term, mid-term, and long-term. For short-term…

  15. Correct Problems, Desperate Solutions.

    ERIC Educational Resources Information Center

    Donohue, William A.

    1996-01-01

    Argues that the social problems confronting America have been bombarded with ill-conceived and unsuccessful social policy largely driven by fear. Explains that parental licensing is a draconian and unworkable solution. Vouchers for indigent youth to attend Catholic schools, developing after-school and summer programs, and reforming welfare are…

  16. An Inexpensive Solution Calorimeter

    ERIC Educational Resources Information Center

    Kavanagh, Emma; Mindel, Sam; Robertson, Giles; Hughes, D. E. Peter

    2008-01-01

    We describe the construction of a simple solution calorimeter, using a miniature bead thermistor as a temperature-sensing element. This has a response time of a few seconds and made it possible to carry out a thermometric reaction in under a minute, which led to minimal heat losses. Small temperature changes of 1 K associated with enthalpies of…

  17. Service-based Solutions.

    ERIC Educational Resources Information Center

    Cummings, Lynda; Winston, Michael

    1998-01-01

    Describes the Solutions model used at Shelley High School in Idaho which gives students the opportunity to gain practical experience while tackling community problems. This approach is built on the three fundamentals of an integrated curriculum, a problem-solving focus, and service-based learning. Sample problems include increasing certain trout…

  18. Knowledge Retrieval Solutions.

    ERIC Educational Resources Information Center

    Khan, Kamran

    1998-01-01

    Excalibur RetrievalWare offers true knowledge retrieval solutions. Its fundamental technologies, Adaptive Pattern Recognition Processing and Semantic Networks, have capabilities for knowledge discovery and knowledge management of full-text, structured and visual information. The software delivers a combination of accuracy, extensibility,…

  19. A fuzzy finite element procedure for the calculation of uncertain frequency-response functions of damped structures: Part 1—Procedure

    NASA Astrophysics Data System (ADS)

    Moens, David; Vandepitte, Dirk

    2005-12-01

    This work introduces a numerical algorithm to calculate frequency-response functions (FRFs) of damped finite element (FE) models with fuzzy uncertain parameters. Part one of this paper describes the numerical algorithm for the solution of the underlying interval finite element (IFE) problem. First, the IFE procedure for the calculation of undamped envelope FRFs is discussed. Starting from the undamped procedure, a strategy is developed to analyse damped structures based on the principle of Rayleigh damping. This is achieved by analysing the effect of the proportional damping coefficients on the subsequent steps of the undamped procedure. This finally results in a procedure for the calculation of fuzzy damped FRFs based on an analytical extension of the undamped algorithm. Part one of this paper introduces the numerical procedure. Part two of this paper illustrates the application of the methodology on four numerical case studies.

  20. Lagrangian solution of supersonic real gas flows

    NASA Technical Reports Server (NTRS)

    Loh, Ching-Yuen; Liou, Meng-Sing

    1993-01-01

    The present extention of a Lagrangian approach of the Riemann solution procedure, which was originally proposed for perfect gases, to real gases, is nontrivial and requires the development of an exact real-gas Riemann solver for the Lagrangian form of the conservation laws. Calculations including complex wave interactions of various types were conducted to test the accuracy and robustness of the approach. Attention is given to the case of 2D oblique waves' capture, where a slip line is clearly in evidence; the real gas effect is demonstrated in the case of a generic engine nozzle.