Use of permanent traffic recorder data to develop factors for traffic and truck variations

DOT National Transportation Integrated Search

2002-10-01

This project entailed the development of the following four traffic volume adjustment factors from 1995 and 1996 permanent traffic recorder data: (1) A truck (axle) adjustment factor for single pneumatic tube counters; (2) A factor for estimating Des...

Permanent split capacitor single phase electric motor system

DOEpatents

Kirschbaum, Herbert S.

1984-01-01

A permanent split capacitor single phase electric motor achieves balanced operation at more than one operating point by adjusting the voltage supplied to the main and auxiliary windings and adjusting the capacitance in the auxiliary winding circuit. An intermediate voltage tap on an autotransformer supplies voltage to the main winding for low speed operation while a capacitive voltage divider is used to adjust the voltage supplied to the auxiliary winding for low speed operation.

Permanent split capacitor single phase electric motor system

DOEpatents

Kirschbaum, H.S.

1984-08-14

A permanent split capacitor single phase electric motor achieves balanced operation at more than one operating point by adjusting the voltage supplied to the main and auxiliary windings and adjusting the capacitance in the auxiliary winding circuit. An intermediate voltage tap on an autotransformer supplies voltage to the main winding for low speed operation while a capacitive voltage divider is used to adjust the voltage supplied to the auxiliary winding for low speed operation. 4 figs.

Measurement method of magnetic field for the wire suspended micro-pendulum accelerometer.

PubMed

Lu, Yongle; Li, Leilei; Hu, Ning; Pan, Yingjun; Ren, Chunhua

2015-04-13

Force producer is one of the core components of a Wire Suspended Micro-Pendulum Accelerometer; and the stability of permanent magnet in the force producer determines the consistency of the acceleration sensor's scale factor. For an assembled accelerometer; direct measurement of magnetic field strength is not a feasible option; as the magnetometer probe cannot be laid inside the micro-space of the sensor. This paper proposed an indirect measurement method of the remnant magnetization of Micro-Pendulum Accelerometer. The measurement is based on the working principle of the accelerometer; using the current output at several different scenarios to resolve the remnant magnetization of the permanent magnet. Iterative Least Squares algorithm was used for the adjustment of the data due to nonlinearity of this problem. The calculated remnant magnetization was 1.035 T. Compared to the true value; the error was less than 0.001 T. The proposed method provides an effective theoretical guidance for measuring the magnetic field of the Wire Suspended Micro-Pendulum Accelerometer; correcting the scale factor and temperature influence coefficients; etc.

8 CFR 245.21 - Adjustment of status of certain nationals of Vietnam, Cambodia, and Laos (section 586 of Public...

Code of Federal Regulations, 2012 CFR

2012-01-01

... of Vietnam, Cambodia, and Laos (section 586 of Public Law 106-429). 245.21 Section 245.21 Aliens and... ADMITTED FOR PERMANENT RESIDENCE § 245.21 Adjustment of status of certain nationals of Vietnam, Cambodia... a lawful permanent resident, a native or citizen of Vietnam, Cambodia, or Laos who: (1) Was...

8 CFR 245.21 - Adjustment of status of certain nationals of Vietnam, Cambodia, and Laos (section 586 of Public...

Code of Federal Regulations, 2014 CFR

2014-01-01

... of Vietnam, Cambodia, and Laos (section 586 of Public Law 106-429). 245.21 Section 245.21 Aliens and... ADMITTED FOR PERMANENT RESIDENCE § 245.21 Adjustment of status of certain nationals of Vietnam, Cambodia... a lawful permanent resident, a native or citizen of Vietnam, Cambodia, or Laos who: (1) Was...

8 CFR 245.21 - Adjustment of status of certain nationals of Vietnam, Cambodia, and Laos (section 586 of Public...

Code of Federal Regulations, 2013 CFR

2013-01-01

... of Vietnam, Cambodia, and Laos (section 586 of Public Law 106-429). 245.21 Section 245.21 Aliens and... ADMITTED FOR PERMANENT RESIDENCE § 245.21 Adjustment of status of certain nationals of Vietnam, Cambodia... a lawful permanent resident, a native or citizen of Vietnam, Cambodia, or Laos who: (1) Was...

8 CFR 245.21 - Adjustment of status of certain nationals of Vietnam, Cambodia, and Laos (section 586 of Public...

Code of Federal Regulations, 2011 CFR

2011-01-01

... of Vietnam, Cambodia, and Laos (section 586 of Public Law 106-429). 245.21 Section 245.21 Aliens and... ADMITTED FOR PERMANENT RESIDENCE § 245.21 Adjustment of status of certain nationals of Vietnam, Cambodia... that of a lawful permanent resident, a native or citizen of Vietnam, Cambodia, or Laos who: (1) Was...

Permanent-Magnet Meissner Bearing

NASA Technical Reports Server (NTRS)

Robertson, Glen A.

1994-01-01

Permanent-magnet meissner bearing features inherently stable, self-centering conical configuration. Bearing made stiffer or less stiff by selection of magnets, springs, and spring adjustments. Cylindrical permanent magnets with axial magnetization stacked coaxially on rotor with alternating polarity. Typically, rare-earth magnets used. Magnets machined and fitted together to form conical outer surface.

Dietary and Behavioral Adjustments to Manage Bowel Dysfunction After Surgery in Long-Term Colorectal Cancer Survviors

PubMed Central

Sun, Virginia; Grant, Marcia; Wendel, Christopher S.; McMullen, Carmit K.; Bulkley, Joanna E.; Altschuler, Andrea; Ramirez, Michelle; Baldwin, Carol M.; Herrinton, Lisa J.; Hornbrook, Mark C.; Krouse, Robert S.

2015-01-01

BACKGROUND Bowel dysfunction is a known complication of colorectal cancer (CRC) surgery. Poor bowel control has a detrimental impact on survivors’ health-related quality of life (HRQOL). This analysis describes the dietary and behavioral adjustments used by CRC survivors to manage bowel dysfunction and compares adjustments used by survivors with permanent ostomy to those with anastomosis. METHODS This mixed-methods analysis included pooled data from several studies that assessed HRQOL in CRC survivors. In all studies, CRC survivors with or without permanent ostomies (N=856) were surveyed using the City of Hope Quality of Life Colorectal Cancer tool. Dietary adjustments were compared by ostomy status and by overall HRQOL score (high versus low). Qualitative data from 13 focus groups and 30 interviews were analyzed to explore specific strategies used by survivors to manage bowel dysfunction. RESULTS CRC survivors made substantial, permanent dietary and behavioral adjustments after surgery, regardless of ostomy status. Survivors who took longer after surgery to become comfortable with their diet or regain their appetite were more likely to report worse HRQOL. Adjustments to control bowel function were divided into four major strategies: dietary adjustments, behavioral adjustments, exercise, and medication use. CONCLUSIONS CRC survivors struggled with unpredictable bowel function and may fail to find a set of management strategies to achieve regularity. Understanding the myriad adjustments used by CRC survivors may lead to evidence-based interventions to foster positive adjustments after surgery and through long-term survivorship. PMID:26159443

Dietary and Behavioral Adjustments to Manage Bowel Dysfunction After Surgery in Long-Term Colorectal Cancer Survivors.

PubMed

Sun, Virginia; Grant, Marcia; Wendel, Christopher S; McMullen, Carmit K; Bulkley, Joanna E; Altschuler, Andrea; Ramirez, Michelle; Baldwin, Carol M; Herrinton, Lisa J; Hornbrook, Mark C; Krouse, Robert S

2015-12-01

Bowel dysfunction is a known complication of colorectal cancer (CRC) surgery. Poor bowel control has a detrimental impact on survivors' health-related quality of life (HRQOL). This analysis describes the dietary and behavioral adjustments used by CRC survivors to manage bowel dysfunction and compares adjustments used by survivors with permanent ostomy to those with anastomosis. This mixed-methods analysis included pooled data from several studies that assessed HRQOL in CRC survivors. In all studies, CRC survivors with or without permanent ostomies (N = 856) were surveyed using the City of Hope Quality of Life Colorectal Cancer tool. Dietary adjustments were compared by ostomy status and by overall HRQOL score (high vs. low). Qualitative data from 13 focus groups and 30 interviews were analyzed to explore specific strategies used by survivors to manage bowel dysfunction. CRC survivors made substantial, permanent dietary, and behavioral adjustments after surgery, regardless of ostomy status. Survivors who took longer after surgery to become comfortable with their diet or regain their appetite were more likely to report worse HRQOL. Adjustments to control bowel function were divided into four major strategies: dietary adjustments, behavioral adjustments, exercise, and medication use. CRC survivors struggled with unpredictable bowel function and may fail to find a set of management strategies to achieve regularity. Understanding the myriad adjustments used by CRC survivors may lead to evidence-based interventions to foster positive adjustments after surgery and through long-term survivorship.

Statins Improve Long Term Patency of Arteriovenous Fistula for Hemodialysis

PubMed Central

Chang, Hao-Hsiang; Chang, Yu-Kang; Lu, Chia-Wen; Huang, Chi-Ting; Chien, Chiang-Ting; Hung, Kuan-Yu; Huang, Kuo-Chin; Hsu, Chih-Cheng

2016-01-01

The protective effects of statins against stenosis for permanent hemodialysis access have been repeatedly demonstrated in animal studies, but remain controversial in human studies. This study aims to evaluate the association between statin use and permanent hemodialysis access patency using a nationwide hemodialysis cohort. A total of 9862 pairs of statin users and non-users, matched by age and gender, were selected for investigation from 75404 new hemodialysis patients during 2000–2008. The effect of statins on permanent hemodialysis access patency was evaluated using Cox proportional hazards models. Compared with non-users, statin users had an overall 18% risk reduction in the composite endpoint in which angioplasty and recreation were combined (adjusted hazard ratio = 0.82 [95%CI, 0.78–0.87]) and 21% in recreation of permanent hemodialysis access (adjusted hazard ratio = 0.79 [95%CI, 0.69–0.80]). Specifically, the protective effect was found for arteriovenous fistula (adjusted hazard ratio = 0.78[95% CI, 0.73–0.82] for composite endpoint and 0.74 [95% CI, 0.69–0.80] for vascular recreation), but not for arteriovenous grafts (adjusted hazard ratio = 1.10 [95% CI, 0.98–1.24] and 0.94 [95% CI, 0.83–1.07]). Statins possess a protective effect for arteriovenous fistula against the recreation of permanent hemodialysis access. The results provide a pharmaco-epidemiologic link between basic research and clinical evidence. PMID:26902330

Does fluoride in drinking water delay tooth eruption?

PubMed

Jolaoso, Ismail Adeyemi; Kumar, Jayanth; Moss, Mark E

2014-01-01

The objectives of this study are to determine the effect of fluoride exposure on permanent tooth eruption patterns as well as to understand its effect on caries attack rate by accounting for the number of erupted tooth surfaces. We analyzed data from the 1986-1987 National Survey of Oral Health of US Schoolchildren to determine the mean number of erupted permanent teeth and permanent first molars according to fluoride level in drinking water. The analysis included 13,348 children aged 5-17 years with a history of single residence. We also estimated the attack rate (decayed, missing, and filled surfaces/surfaces at risk) for fluoride deficient, suboptimal, and optimally fluoridated areas adjusting for covariates. Multivariable statistical analyses were performed to control for potential confounders. By age 7, almost all permanent first molars had erupted. The adjusted mean number of erupted permanent first molars per child were 3.81, 3.67, and 3.92 in areas with <0.3, 0.3-<0.7, and 0.7-1.2 ppm of fluoride, respectively. The adjusted caries attack rate in the first permanent molars among 5- to 17-year-old children was 93, 81, and 78 per 1,000 surfaces in fluoride deficient, suboptimal, and optimally fluoridated areas, respectively (P < 0.0001). This pattern of higher first molar attack rate among children in the fluoride-deficient communities was also observed in all erupted teeth. Exposure to fluoride in drinking water did not delay the eruption of permanent teeth. The observed difference in dental caries experience among children exposed to different fluoride levels could not be explained by the timing of eruption of permanent teeth. © 2014 American Association of Public Health Dentistry.

Magnetic force study for the helical afterburner for the European XFEL

NASA Astrophysics Data System (ADS)

Li, Peng; Wei, Tao; Li, Yuhui; Pflueger, Joachim

2017-05-01

At present the SASE3 undulator line at the European XFEL is using a planar undulator producing linear polarized soft Xray radiation only. In order to satisfy the demand for circular polarized radiation a helical undulator system, the so-called afterburner is in construction. It will be operated as a radiator using the pre-bunched beam of the SASE3 undulator system. Among several options for the magnetic structure the Apple-X geometry was chosen. This is a pure permanent magnet undulator using NdFeB material. Four magnet arrays are arranged symmetrically the beam axis. Polarization can be changed by adjusting the phase shift (PS) between the two orthogonal structures. The field strength can be adjusted either by gap adjustment or alternatively by the amplitude shift (AS) scheme. For an engineering design the maximum values of forces and torques on each of the components under worst case operational conditions are important. The superposition principle is used to reduce calculation time. It is found that the maximum forces Fx, Fy and Fz for a 2m long Apple-X undulator are 1.8*104N, 2.4*104N and 2.3*104N, respectively. More results are presented in this paper.

Evaluation of bond strength of self-etching adhesives having different pH on primary and permanent teeth dentin.

PubMed

Ozmen, Bilal; Koyuturk, Alp Erdin; Tokay, Ugur; Cortcu, Murat; Sari, Mustafa Erhan

2015-10-16

The purpose of this in vitro study was to evaluate the dentin shear bond strength of 4 self-etching adhesives having a different pH on primary and permanent teeth dentin. The occlusal enamel was removed from 60 freshly extracted third molar and 60 primary second molar human teeth, which were randomly separated into 4 groups (n = 15). Four adhesive systems were applied: G-Bond (GC Corporation, Tokyo, Japan, pH: 1.5), Futura Bond M (Voco, Cuxhaver, Germany, pH: 1.4), Adper Prompt L-Pop (3M/ESPE, St Paul, MN, USA, pH: 0.8), and Clearfil S(3) Bond (Kuraray Medical, Tokyo, Japan, pH: 2.7) according to the manufacturer's instructions. After the application of dentin bonding agents, a composite resin material (Z250 Restorative A2, 3M ESPE, St. Paul, MN, USA) for permanent teeth and a compomer resin material (Dyract Extra A2, Dentsply, Konstanz, Germany) for primary teeth was applied onto the prepared dentin surfaces. The data were obtained by using a universal test machine at a crosshead speed of 1 mm/min. The mean values were compared using Tukey's multiple comparison test. Although there was no difference between adhesives on the permanent teeth, Clearfil S3 adhesive showed higher bond (18.07 ± 0.58 MPa) (P>0.05). Lower bond strength values were obtained from primary teeth and especially G-Bond adhesive (9.36 ± 0.48 MPa) (P<0.05). Self-etching adhesives with different pH and solvent types can be used successfully for permanent teeth dentin but adhesives with low pH did not provide greater shear bond strength values.

Energy Saving Melting and Revert Reduction Technology (Energy-SMARRT): Light Metals Permanent Mold Casting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fasoyinu, Yemi

2014-03-31

Current vehicles use mostly ferrous components for structural applications. It is possible to reduce the weight of the vehicle by substituting these parts with those made from light metals such as aluminum and magnesium. Many alloys and manufacturing processes can be used to produce these light metal components and casting is known to be most economical. One of the high integrity casting processes is permanent mold casting which is the focus of this research report. Many aluminum alloy castings used in automotive applications are produced by the sand casting process. Also, aluminum-silicon (Al-Si) alloys are the most widely used alloymore » systems for automotive applications. It is possible that by using high strength aluminum alloys based on an aluminum-copper (Al-Cu) system and permanent mold casting, the performance of these components can be enhanced significantly. This will also help to further reduce the weight. However, many technological obstacles need to be overcome before using these alloys in automotive applications in an economical way. There is very limited information in the open literature on gravity and low-pressure permanent mold casting of high strength aluminum alloys. This report summarizes the results and issues encountered during the casting trials of high strength aluminum alloy 206.0 (Al-Cu alloy) and moderate strength alloy 535.0 (Al-Mg alloy). Five engineering components were cast by gravity tilt-pour or low pressure permanent mold casting processes at CanmetMATERIALS (CMAT) and two production foundries. The results of the casting trials show that high integrity engineering components can be produced successfully from both alloys if specific processing parameters are used. It was shown that a combination of melt processing and mold temperature is necessary for the elimination of hot tears in both alloys.« less

Complementary analyses of hollow cylindrical unioriented permanent magnet (HCM) with high permeability external layer

NASA Astrophysics Data System (ADS)

Lobo, Carlos M. S.; Tosin, Giancarlo; Baader, Johann E.; Colnago, Luiz A.

2017-10-01

In this article, several studies based on analytical expressions and computational simulations on Hollow Cylindrical Magnets with an external soft ferromagnetic material (HCM magnets) are presented. Electromagnetic configurations, as well as permanent-magnet-based structures, are studied in terms of magnetic field strength and homogeneity. Permanent-magnet-based structures are further analyzed in terms of the anisotropy of the magnetic permeability. It was found that the HCM magnets produce a highly homogeneous magnetic field as long as the magnetic material is isotropic. The dependency of the magnetic field strength and homogeneity in terms of the anisotropy of the magnetic permeability is also explored here. These magnets can potentially be used in medium-resolution NMR spectrometers and high-field NMR spectrometers.

Factors associated with utilization of long-acting and permanent contraceptive methods among women who have decided not to have more children in Gondar city.

PubMed

Zenebe, Chernet Baye; Adefris, Mulat; Yenit, Melaku Kindie; Gelaw, Yalemzewod Assefa

2017-09-06

Despite the fact that long acting family planning methods reduce population growth and improve maternal health, their utilization remains poor. Therefore, this study assessed the prevalence of long acting and permanent family planning method utilization and associated factors among women in reproductive age groups who have decided not to have more children in Gondar city, northwest Ethiopia. An institution based cross-sectional study was conducted from August to October, 2015. Three hundred seventeen women who have decided not to have more children were selected consecutively into the study. A structured and pretested questionnaire was used to collect data. Both bivariate and multi-variable logistic regressions analyses were used to identify factors associated with utilization of long acting and permanent family planning methods. The multi-variable logistic regression analysis was used to investigate factors associated with the utilization of long acting and permanent family planning methods. The Adjusted Odds Ratio (AOR) with the corresponding 95% Confidence Interval (CI) was used to show the strength of associations, and variables with a P-value of <0.05 were considered statistically significant. In this study, the overall prevalence of long acting and permanent contraceptive (LAPCM) method utilization was 34.7% (95% CI: 29.5-39.9). According to the multi-variable logistic regression analysis, utilization of long acting and permanent contraceptive methods was significantly associated with women who had secondary school, (AOR: 2279, 95% CI: 1.17, 4.44), college, and above education (AOR: 2.91, 95% CI: 1.36, 6.24), history of previous utilization (AOR: 3.02, 95% CI: 1.69, 5.38), and information about LAPCM (AOR: 8.85, 95% CI: 2.04, 38.41). In this study the prevalence of long acting and permanent family planning method utilization among women who have decided not to have more children was high compared with previous studies conducted elsewhere. Advanced educational status, previous utilization of LAPCM, and information on LAPCM were significantly associated with the utilization of LAPCM. As a result, strengthening behavioral change communication channels to make information accessible is highly recommended.

Effect of salivary contamination and decontamination on bond strength of two one-step self-etching adhesives to dentin of primary and permanent teeth.

PubMed

Santschi, Katharina; Peutzfeldt, Anne; Lussi, Adrian; Flury, Simon

2015-02-01

To evaluate the effects of human saliva contamination and two decontamination procedures at different stages of the bonding procedure on the bond strength of two one-step self-etching adhesives to primary and permanent dentin. Extracted human primary and permanent molars (210 of each) were ground to mid-coronal dentin. The dentin specimens were randomly divided into 7 groups (n = 15/group/molar type) for each adhesive (Xeno V+ and Scotchbond Universal): no saliva contamination (control); saliva contamination before or after light curing of the adhesives followed by air drying, rinsing with water spray/air drying, or by rinsing with water spray/air drying/reapplication of the adhesives. Resin composite (Filtek Z250) was applied on the treated dentin surfaces. The specimens were stored at 37°C and 100% humidity for 24 h. After storage, shear bond strength (SBS) was measured and data analyzed with nonparametric ANOVA followed by exact Wilcoxon rank sum tests. Xeno V+ generated significantly higher SBS than Scotchbond Universal when no saliva contamination occurred. Saliva contamination reduced SBS of Xeno V+, with the reduction being more pronounced when contamination occurred before light curing than after. In both situations, decontamination involving reapplication of the adhesive restored SBS. Saliva contamination had no significant effect on Scotchbond Universal. There were no differences in SBS between primary and permanent teeth. Rinsing with water and air drying followed by reapplication of the adhesive restored bond strength to saliva-contaminated dentin.

Complementary analyses of hollow cylindrical unioriented permanent magnet (HCM) with high permeability external layer.

PubMed

Lobo, Carlos M S; Tosin, Giancarlo; Baader, Johann E; Colnago, Luiz A

2017-10-01

In this article, several studies based on analytical expressions and computational simulations on Hollow Cylindrical Magnets with an external soft ferromagnetic material (HCM magnets) are presented. Electromagnetic configurations, as well as permanent-magnet-based structures, are studied in terms of magnetic field strength and homogeneity. Permanent-magnet-based structures are further analyzed in terms of the anisotropy of the magnetic permeability. It was found that the HCM magnets produce a highly homogeneous magnetic field as long as the magnetic material is isotropic. The dependency of the magnetic field strength and homogeneity in terms of the anisotropy of the magnetic permeability is also explored here. These magnets can potentially be used in medium-resolution NMR spectrometers and high-field NMR spectrometers. Copyright © 2017 Elsevier Inc. All rights reserved.

[Mechanical Shimming Method and Implementation for Permanent Magnet of MRI System].

PubMed

Xue, Tingqiang; Chen, Jinjun

2015-03-01

A mechanical shimming method and device for permanent magnet of MRI system has been developed to meet its stringent homogeneity requirement without time-consuming passive shimming on site, installation and adjustment efficiency has been increased.

Benznidazole treatment safety: the Médecins Sans Frontières experience in a large cohort of Bolivian patients with Chagas' disease.

PubMed

Sperandio da Silva, Gilberto Marcelo; Mediano, M F F; Hasslocher-Moreno, Alejandro Marcel; Holanda, Marcelo Teixeira de; Silvestre de Sousa, Andrea; Sangenis, Luiz Henrique Conde; Brasil, Pedro Emmanuel Alvarenga Americano do; Mejía, Roger Arteaga; Fux, Carina Perotti; Cubides, Juan-Carlos; Saraiva, Roberto Magalhães; Brum-Soares, Lucia Maria

2017-09-01

Up to half of patients with Chagas' disease under benznidazole treatment present adverse drug reactions (ADRs) and up to one-third do not complete standard treatment. To verify the incidence and possible factors associated with the suspension of benznidazole treatment in a large cohort of patients. We included 2075 patients treated with benznidazole during the projects managed by the medical humanitarian organization Doctors Without Borders (Médecins Sans Frontières) in Bolivia from 2009 to 2013. Benznidazole treatment was provided two or three times per day for ∼60 days at 5-7.5 mg/kg/day. A multiple logistic regression model was developed to evaluate the factors associated with permanent suspension of benznidazole treatment. Permanent benznidazole treatment suspension occurred in 211 patients (10.2%) and the average time until permanent treatment suspension was 23 days. Multifactorial analysis revealed that female sex (adjusted OR = 1.70), moderate ADRs (adjusted OR = 10.57), mild ADRs (adjusted OR = 1.69) and skin disorders (adjusted OR = 4.18) were significantly associated with the permanent suspension of benznidazole treatment. Women with mild or moderate skin ADRs presented a probability of treatment interruption of 18.6% and 59.0%, respectively. Benznidazole treatment was safe and a large proportion of patients were able to complete a full course of benznidazole treatment under close treatment surveillance. Female sex, skin disorders and mild and moderate ADRs were independently associated with the permanent suspension of benznidazole treatment. In particular, women with moderate skin ADRs had the highest risk of benznidazole treatment interruption. © The Author 2017. Published by Oxford University Press on behalf of the British Society for Antimicrobial Chemotherapy. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Estimation of rail wear limits based on rail strength investigations

DOT National Transportation Integrated Search

1998-12-01

This report describes analyses performed to estimate limits on rail wear based on strength investigations. Two different failure modes are considered in this report: (1) permanent plastic bending, and (2) rail fracture. Rail bending stresses are calc...

ThermoYield actuators: nano-adjustable set-and-forget optics mounts

NASA Astrophysics Data System (ADS)

DeTienne, Michael D.; Bruccoleri, Alexander R.; Chalifoux, Brandon; Heilmann, Ralf K.; Tedesco, Ross E.; Schattenburg, Mark L.

2017-08-01

The X-ray optics community has been developing technology for high angular resolution, large collecting area X-ray telescopes such as the Lynx X-ray telescope concept. To meet the high collecting area requirements of such telescope concepts, research is being conducted on thin, segmented optics. The mounts that fixture and align segmented optics must be the correct length to sub-micron accuracy to satisfy the angular resolution goals of such a concept. Set-andforget adjustable length optical mounting posts have been developed to meet this need. The actuator consists of a cylinder made of metal. Halfway up the height of the metal cylinder, a reduced diameter cylindrical neck is cut. To change the length of this actuator, an axial compressive or tensile force is applied to the actuator. A high-current electrical pulse is sent through the actuator, and this electrical current resistively heats the neck of the actuator. This heating temporarily reduces the yield strength of the neck, so that the applied force plastically deforms the neck. Once the current stops and the neck cools, the neck will regain yield strength, and the plastic deformation will stop. All of the plastic deformation that occurred during heating is now permanent. Both compression and expansion of these actuators has been demonstrated in steps ranging from 6 nanometers to several microns. This paper will explain the concept of ThermoYield actuation, explore X-ray telescope applications, describe an experimental setup, show and discuss data, and propose future ideas.

The impact of permanent muscle weakness on quality of life in periodic paralysis: a survey of 66 patients.

PubMed

Cavel-Greant, Deborah; Lehmann-Horn, Frank; Jurkat-Rott, Karin

2012-10-01

The periodic paralyses are hereditary muscle diseases which cause both episodic and permanent weakness. Permanent weakness may include both reversible and fixed components, the latter caused by fibrosis and fatty replacement. To determine the degree of handicap and impact of permanent weakness on daily life, we conducted a 68-question online survey of 66 patients over 41 years (mean age, 60 ± 14 years). Permanent weakness occurred in 68%, muscle pain in 82% and muscle fatigue in 89%. Eighty-three percent of patients reported themselves as moderately to very active between ages 18-35. At the time of the survey only 14% reported themselves as moderately to very active. Contrary to the literature, only 21% of patients reported decreased frequency of episodic weakness with increased age. Sixty-seven percent had incurred injuries due to falls. Mobility aids were required by 49%. Strength increased in 49% of patients receiving professional physiotherapy and in 62% performing self-managed exercise routines. A decline of strength was observed by 40% with professional and by 16% with self-managed exercise routine, suggesting that overworking muscles may not be beneficial. There is an average of 26 years between age at onset and age at diagnosis indicating that diagnostic schemes can be improved. In summary our data suggests that permanent muscle weakness has a greater impact on the quality of life of patients than previously anticipated.

Conceptual design of a compact high gradient quadrupole magnet of varying strength using permanent magnets

NASA Astrophysics Data System (ADS)

Sinha, Gautam

2018-02-01

A concept is presented to design magnets using cylindrical-shaped permanent-magnet blocks, where various types of magnetic fields can be produced by either rotating or varying the size of the magnetic blocks within a given mechanical structure. A general method is introduced to calculate the 3D magnetic field produced by a set of permanent magnets. An analytical expression of the 2D field and the condition to generate various magnetic fields like dipole, quadrupole, and sextupole are derived. Using the 2D result as a starting point, a computer code is developed to get the optimum orientation of the magnets to obtain the user-specific target field profile over a given volume in 3D. Designs of two quadrupole magnets are presented, one using 12 and the other using 24 permanent-magnet blocks. Variation of the quadrupole strength is achieved using tuning coils of a suitable current density and specially designed end tubes. A new concept is introduced to reduce the integrated quadrupole field strength by inserting two hollow cylindrical tubes made of iron, one at each end. This will not affect the field gradient at the center but reduce the integrated field strength by shielding the magnetic field near the ends where the tubes are inserted. The advantages of this scheme are that it is easy to implement, the magnetic axis will not shift, and it will prevent interference with nearby devices. Around 40% integrated field variation is achieved using this method in the present example. To get a realistic estimation of the field quality, a complete 3D model using a nonlinear B -H curve is also studied using a finite-element-based computer code. An example to generate around an 80 T /m quadrupole field gradient is also presented.

Permanent magnet flux-biased magnetic actuator with flux feedback

NASA Technical Reports Server (NTRS)

Groom, Nelson J. (Inventor)

1991-01-01

The invention is a permanent magnet flux-biased magnetic actuator with flux feedback for adjustably suspending an element on a single axis. The magnetic actuator includes a pair of opposing electromagnets and provides bi-directional forces along the single axis to the suspended element. Permanent magnets in flux feedback loops from the opposing electromagnets establish a reference permanent magnet flux-bias to linearize the force characteristics of the electromagnets to extend the linear range of the actuator without the need for continuous bias currents in the electromagnets.

Testing of the permanent magnet material Mn-Al-C for potential use in propulsion motors for electric vehicles

NASA Technical Reports Server (NTRS)

Abdelnour, Z.; Mildrun, H.; Strant, K.

1981-01-01

The development of Mn-Al-C permanent magnets is reviewed. The general properties of the material are discussed and put into perspective relative to alnicos and ferrites. The traction motor designer's demands of a permanent magnet for potential use in electric vehicle drives are reviewed. Tests determined magnetic design data and mechanical strength properties. Easy axis hysteresis and demagnetization curves, recoil loops and other minor loop fields were measured over a temperature range from -50 to 150 C. Hysteresis loops were also measured for three orthogonal directions (the one easy and two hard axes of magnetization). Extruded rods of three different diameters were tested. The nonuniformity of properties over the cross section of the 31 mm diameter rod was studied. Mechanical compressive and bending strength at room temperature was determined on individual samples from the 31 mm rod.

40 CFR 1048.115 - What other requirements apply?

Code of Federal Regulations, 2010 CFR

2010-07-01

... must broadcast their speed and output shaft torque (in newton-meters). Engines may alternatively... adjustable range. An operating parameter is not considered adjustable if you permanently seal it or if it is...

PubMed Central

CAVEL-GREANT, DEBORAH; LEHMANN-HORN, FRANK; JURKAT-ROTT, KARIN

2012-01-01

The periodic paralyses are hereditary muscle diseases which cause both episodic and permanent weakness. Permanent weakness may include both reversible and fixed components, the latter caused by fibrosis and fatty replacement. To determine the degree of handicap and impact of permanent weakness on daily life, we conducted a 68-question online survey of 66 patients over 41 years (mean age, 60 ± 14 years). Permanent weakness occurred in 68%, muscle pain in 82% and muscle fatigue in 89%. Eighty-three percent of patients reported themselves as moderately to very active between ages 18-35. At the time of the survey only 14% reported themselves as moderately to very active. Contrary to the literature, only 21% of patients reported decreased frequency of episodic weakness with increased age. Sixty-seven percent had incurred injuries due to falls. Mobility aids were required by 49%. Strength increased in 49% of patients receiving professional physiotherapy and in 62% performing self-managed exercise routines. A decline of strength was observed by 40% with professional and by 16% with self-managed exercise routine, suggesting that overworking muscles may not be beneficial. There is an average of 26 years between age at onset and age at diagnosis indicating that diagnostic schemes can be improved. In summary our data suggests that permanent muscle weakness has a greater impact on the quality of life of patients than previously anticipated. PMID:23097604

7 CFR 4287.112 - Interest rate adjustments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false Interest rate adjustments. 4287.112 Section 4287.112... Loans § 4287.112 Interest rate adjustments. (a) Reductions. The borrower, lender, and holder (if any) may collectively initiate a permanent or temporary reduction in the interest rate of the guaranteed...

Welding of titanium and stainless steel using the composite insert

NASA Astrophysics Data System (ADS)

Cherepanov, A. N.; Mali, V. I.; Orishich, A. M.; Malikov, A. G.; Drozdov, V. O.; Malyutina, Y. N.

2016-11-01

The paper concerns the possibility of obtaining a lasting permanent joint of dissimilar metals: technically pure titanium and stainless steel using laser welding and an intermediate composite insert. The insert was a four-layer composition of plates of steel, copper, niobium, and titanium welded by explosion. The material layers used in the insert prevented the molten steel and titanium from mixing, which excluded the formation of brittle intermetallic compounds, such as FeTi and Fe2Ti. The optimization of explosion welding parameters provided a high quality of the four-layer composition and the absence of defects in the area of the joint of insert plates. The results of strength tests showed that values of the ultimate strength and yield of the permanent joint with the composite insert welded by explosion are comparable to the strength characteristics of titanium.

Design and application of permanent magnet flux sources for mechanical testing of magnetoactive elastomers at variable field directions.

PubMed

Hiptmair, F; Major, Z; Haßlacher, R; Hild, S

2015-08-01

Magnetoactive elastomers (MAEs) are a class of smart materials whose mechanical properties can be rapidly and reversibly changed by an external magnetic field. Due to this tunability, they are useable for actuators or in active vibration control applications. An extensive magnetomechanical characterization is necessary for MAE material development and requires experiments under cyclic loading in uniform but variable magnetic fields. MAE testing apparatus typically rely on fields of adjustable strength, but fixed (transverse) direction, often provided by electromagnets. In this work, two permanent magnet flux sources were developed as an add-on for a modular test stand, to allow for mechanical testing in uniform fields of variable direction. MAE specimens, based on a silicone matrix with isotropic and anisotropic carbonyl iron particle distributions, were subjected to dynamic mechanical analysis under different field and loading configurations. The magneto-induced increase of stiffness and energy dissipation was determined by the change of the hysteresis loop area and dynamic modulus values. A distinct influence of the composite microstructure and the loading state was observed. Due to the very soft and flexible matrix used for preparing the MAE samples, the material stiffness and damping behavior could be varied over a wide range via the applied field direction and intensity.

Permanent-magnet flowmeter having improved output-terminal means

DOEpatents

August, C.; Myers, H.J.

1981-10-26

Disclosed is an improved permanent magnet flowmeter capable of withstanding bending stresses in the direction of induced emf signals. The flowmeter includes a unique terminal arrangement integrally formed with the flowmeter by trepanning opposing wall sections of the flowmeter body. The terminal arrangement provides increased flowmeter sensitivity by increasing the strength of the induced emf signals.

Permanent magnet flowmeter having improved output terminal means

DOEpatents

August, Charles; Myers, Harry J.

1984-01-01

Disclosed is an improved permanent magnet flowmeter capable of withstanding bending stresses in the direction of induced emf signals. The flowmeter includes a unique terminal arrangement integrally formed with the flowmeter by trepanning opposing wall sections of the flowmeter body. The terminal arrangement provides increased flowmeter sensitivity by increasing the strength of the induced emf signals.

12 CFR 615.5205 - Minimum permanent capital standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Minimum permanent capital standards. 615.5205 Section 615.5205 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM FUNDING AND FISCAL... least 7 percent of its risk-adjusted asset base. [62 FR 4446, Jan. 30, 1997] ...

14 CFR 23.305 - Strength and deformation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Strength and deformation. 23.305 Section 23.305 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT..., permanent deformation. At any load up to limit loads, the deformation may not interfere with safe operation...

14 CFR 23.305 - Strength and deformation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Strength and deformation. 23.305 Section 23.305 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT..., permanent deformation. At any load up to limit loads, the deformation may not interfere with safe operation...

Adjustable permanent magnet assembly for NMR and MRI

DOEpatents

Pines, Alexander; Paulsen, Jeffrey; Bouchard, Louis S; Blumich, Bernhard

2013-10-29

System and methods for designing and using single-sided magnet assemblies for magnetic resonance imaging (MRI) are disclosed. The single-sided magnet assemblies can include an array of permanent magnets disposed at selected positions. At least one of the permanent magnets can be configured to rotate about an axis of rotation in the range of at least +/-10 degrees and can include a magnetization having a vector component perpendicular to the axis of rotation. The single-sided magnet assemblies can further include a magnet frame that is configured to hold the permanent magnets in place while allowing the at least one of the permanent magnets to rotate about the axis of rotation.

Language ability in children with permanent hearing impairment: the influence of early management and family participation.

PubMed

Watkin, Peter; McCann, Donna; Law, Catherine; Mullee, Mark; Petrou, Stavros; Stevenson, Jim; Worsfold, Sarah; Yuen, Ho Ming; Kennedy, Colin

2007-09-01

The goal was to examine the relationships between management after confirmation, family participation, and speech and language outcomes in the same group of children with permanent childhood hearing impairment. Speech, oral language, and nonverbal abilities, expressed as z scores and adjusted in a regression model, and Family Participation Rating Scale scores were assessed at a mean age of 7.9 years for 120 children with bilateral permanent childhood hearing impairment from a 1992-1997 United Kingdom birth cohort. Ages at institution of management and hearing aid fitting were obtained retrospectively from case notes. Compared with children managed later (> 9 months), those managed early (< or = 9 months) had higher adjusted mean z scores for both receptive and expressive language, relative to nonverbal ability, but not for speech. Compared with children aided later, a smaller group of more-impaired children aided early did not have significantly higher scores for these outcomes. Family Participation Rating Scale scores showed significant positive correlations with language and speech intelligibility scores only for those with confirmation after 9 months and were highest for those with late confirmed, severe/profound, permanent childhood hearing impairment. Early management of permanent childhood hearing impairment results in improved language. Family participation is also an important factor in cases that are confirmed late, especially for children with severe or profound permanent childhood hearing impairment.

45 CFR 153.10 - Basis and scope.

Code of Federal Regulations, 2012 CFR

2012-10-01

... RELATED TO REINSURANCE, RISK CORRIDORS, AND RISK ADJUSTMENT UNDER THE AFFORDABLE CARE ACT General... program for individual market in each State. (3) Section 1342. Establishment of risk corridors for plans... risk corridors program, and a permanent risk adjustment program. ...

45 CFR 153.10 - Basis and scope.

Code of Federal Regulations, 2014 CFR

2014-10-01

... RELATED TO REINSURANCE, RISK CORRIDORS, AND RISK ADJUSTMENT UNDER THE AFFORDABLE CARE ACT General... program for individual market in each State. (3) Section 1342. Establishment of risk corridors for plans... risk corridors program, and a permanent risk adjustment program. ...

45 CFR 153.10 - Basis and scope.

Code of Federal Regulations, 2013 CFR

2013-10-01

... RELATED TO REINSURANCE, RISK CORRIDORS, AND RISK ADJUSTMENT UNDER THE AFFORDABLE CARE ACT General... program for individual market in each State. (3) Section 1342. Establishment of risk corridors for plans... risk corridors program, and a permanent risk adjustment program. ...

Associations between contractual status, part-time work, and intent to leave among professional caregivers for older people: results of a national cross-sectional survey in Japan.

PubMed

Kachi, Yuko; Inoue, Kazuo; Toyokawa, Satoshi

2010-08-01

Despite a growing number of studies on leaving the organization or long-term care among professional caregivers for older people, little is known about the impact of types of employment on leaving. To examine the association between the type of employment and intent to leave among Japanese professional caregivers. Secondary analysis of data from the 2006 Working Conditions Survey in Long-term Care, a nationally representative cross-sectional survey done in Japan. 10,107 professional caregivers aged 18 years and older. Predictor of intent to leave was type of employment (full-time permanent, full-time precarious, and part-time precarious). Precarious work was defined as employment that failed to meet the standard of full-time permanent employment, including fixed-term, temporary agency, and part-time work. Covariates included demographics, home or facility care, tenure in the profession, national qualification for caregivers, having other jobs, overtime work, and night shift work. We used multinomial logit models to estimate the strength of the association between the type of employment and intent to leave and to explore the possible mechanisms explaining this association. In the unadjusted model, when compared to part-time precarious workers, full-time permanent workers (OR=2.37; 95% CI=2.06, 2.72) and full-time precarious workers (OR=2.41; 95% CI=2.01, 2.88) were more likely to report intent to leave. After adjustment for covariates, these odds ratios were attenuated, but nevertheless remained significant. Overtime work greatly attenuated these odds ratios in both full-time precarious and full-time permanent workers, and having national qualification for caregivers only did in the case of full-time permanent workers. In contrast to people in other professions, full-time caregivers are more likely to have intent to leave than part-time caregivers. This study highlights the importance of policy strategies for retaining full-time workers by reducing their overtime work and rewarding caregivers who have national qualifications. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

Design of a Permanent-Magnet Zeeman Slower

NASA Astrophysics Data System (ADS)

Adler, Charles; Narducci, Frank; Sukenik, Charles; Mulholland, Jonathan; Goodale, Sarah

2006-05-01

During the past decade, low cost, flexible, and highly-polarized magnetic field sheet material has become available with field strengths useful for applications in modern atomic physics experiments. One advantage of using such material is that it can easily be cut to almost any desired shape without appreciable loss of field strength making it more versatile than ceramic magnets. We present the design of a Zeeman slower, made from such material, for cooling an atomic beam of neutral rubidium atoms and discuss results from an atomic beam trajectory simulation which indicates that the slower should perform well. We will also report on progress of a prototype permanent magnet Zeeman slower presently under construction in the laboratory.

Dynamic loading and stress life analysis of permanent space station modules

NASA Astrophysics Data System (ADS)

Anisimov, A. V.; Krokhin, I. A.; Likhoded, A. I.; Malinin, A. A.; Panichkin, N. G.; Sidorov, V. V.; Titov, V. A.

2016-11-01

Some methodological approaches to solving several key problems of dynamic loading and structural strength analysis of Permanent Space Station (PSS)modules developed on the basis of the working experience of Soviet and Russian PSS and the International Space station (ISS) are presented. The solutions of the direct and semi-inverse problems of PSS structure dynamics are mathematically stated. Special attention is paid to the use of the results of ground structural strength tests of space station modules and the data on the actual flight actions on the station and its dynamic responses in the orbital operation regime. The procedure of determining the dynamics and operation life parameters of elements of the PSS modules is described.

24 CFR 883.308 - Adjustments to reflect changes in terms of financing.

Code of Federal Regulations, 2010 CFR

2010-04-01

... projected rate of borrowing (net interest cost), based on a reasonable evaluation of market conditions, on obligations issued to provide interim and permanent financing for the project, (2) The projected cost of..., (4) The projected cost of borrowing and the term of the permanent financing to be provided to the...

8 CFR 245.12 - What are the procedures for certain Polish and Hungarian parolees who are adjusting status to...

Code of Federal Regulations, 2010 CFR

2010-01-01

... Immigration Reform and Immigrant Responsibility Act of 1996? 245.12 Section 245.12 Aliens and Nationality... adjusting status to that of permanent resident under the Illegal Immigration Reform and Immigrant...

Variable high gradient permanent magnet quadrupole (QUAPEVA)

NASA Astrophysics Data System (ADS)

Marteau, F.; Ghaith, A.; N'Gotta, P.; Benabderrahmane, C.; Valléau, M.; Kitegi, C.; Loulergue, A.; Vétéran, J.; Sebdaoui, M.; André, T.; Le Bec, G.; Chavanne, J.; Vallerand, C.; Oumbarek, D.; Cosson, O.; Forest, F.; Jivkov, P.; Lancelot, J. L.; Couprie, M. E.

2017-12-01

Different applications such as laser plasma acceleration, colliders, and diffraction limited light sources require high gradient quadrupoles, with strength that can reach up to 200 T/m for a typical 10 mm bore diameter. We present here a permanent magnet based quadrupole (so-called QUAPEVA) composed of a Halbach ring and surrounded by four permanent magnet cylinders. Its design including magnetic simulation modeling enabling us to reach 201 T/m with a gradient variability of 45% and mechanical issues are reported. Magnetic measurements of seven systems of different lengths are presented and confirmed the theoretical expectations. The variation of the magnetic center while changing the gradient strength is ±10 μm. A triplet of QUAPEVA magnets is used to efficiently focus a beam with large energy spread and high divergence that is generated by a Laser Plasma Acceleration source for a free electron laser demonstration and has enabled us to perform beam based alignment and control the dispersion of the beam.

Are Two Voices Better Than One? Predicting Permanency for Minority Youth Using Multi-Informant Mental Health and Strength Data

PubMed Central

Toche-Manley, Linda L.; Dietzen, Laura; Nankin, Jesse; Beigel, Astrid

2013-01-01

Among youth in child welfare ages 6 to 17, 40% meet criteria for one or more DSM diagnoses. For minority youth in child welfare, poor mental health is compounded by limited access to care and racial disparity bias, leading to poorer outcomes. This paper uses data collected and analyzed by an automated behavioral health assessment system for a multi-year study that focused on ways to improve case planning in child welfare. Youth, their caseworkers and, in some cases, parents completed assessments that measured and monitored the youths’ needs and strengths. More than 60% of youth participating in the study were African American; permanency rates after six months of case planning were found to be only one-third. Predictive factors related to better behavioral health and permanency outcomes are identified and discussed, as well as the implications for improving case planning by incorporating the views of multiple informants, including the youth. PMID:22566058

Body mass index, blood pressure, and glucose and lipid metabolism among permanent and fixed-term workers in the manufacturing industry: a cross-sectional study.

PubMed

Inoue, Mariko; Minami, Masahide; Yano, Eiji

2014-02-27

Temporary employment, a precarious form of employment, is recognized as social determinant of poor health. However, evidence supporting precarious employment as a risk factor for health is mainly obtained from subjective data. Studies using objective clinical measurement data in the assessment of health status are limited. This study compared body mass index (BMI), lipid and glucose metabolism, and health-related lifestyle factors between permanent workers and fixed-term workers employed in the manufacturing industry. Data of 1,701 male manufacturing industry workers <50 years old in Japan were collected and analyzed. Anthropometric data were BMI, calculated using measured height and weight of study participants, and blood pressure. For lipid metabolism, low-density lipoprotein cholesterol, high-density lipoprotein cholesterol, and triglyceride levels were determined. For glucose metabolism, fasting plasma glucose and hemoglobin A1c (HbA1c) levels were measured. Multiple regression analysis adjusted for age and lifestyle factors was performed. BMI was significantly higher in permanent workers (22.9 kg/m2) compared with fixed-term workers (22.4 kg/m2). The leaner population (BMI < 18.5) was greater among fixed-term workers (8.3%) compared with permanent workers (4.0%), whereas the overweight population (BMI ≥ 25.0) was greater among permanent workers (21.4%) compared with fixed-term workers (18.1%). Although fixed-term workers tended not to be overweight, regression analysis adjusted for age and lifestyle factors suggested that fixed-term employment was significantly associated with higher blood pressure (systolic β = 2.120, diastolic β = 2.793), triglyceride (β = 11.147), fasting blood glucose (β = 2.218), and HbA1c (β = 0.107) compared with permanent workers (all p < 0.01). Fixed-term workers showed more health risks, such as poorer blood pressure and lipid and glucose metabolism, even when adjusted for age and lifestyle variables, although BMI of fixed-term workers were lower than permanent workers. Precarious work might contribute to a deteriorating health status even among less overweight populations.

Estimation of genetic parameters related to eggshell strength using random regression models.

PubMed

Guo, J; Ma, M; Qu, L; Shen, M; Dou, T; Wang, K

2015-01-01

This study examined the changes in eggshell strength and the genetic parameters related to this trait throughout a hen's laying life using random regression. The data were collected from a crossbred population between 2011 and 2014, where the eggshell strength was determined repeatedly for 2260 hens. Using random regression models (RRMs), several Legendre polynomials were employed to estimate the fixed, direct genetic and permanent environment effects. The residual effects were treated as independently distributed with heterogeneous variance for each test week. The direct genetic variance was included with second-order Legendre polynomials and the permanent environment with third-order Legendre polynomials. The heritability of eggshell strength ranged from 0.26 to 0.43, the repeatability ranged between 0.47 and 0.69, and the estimated genetic correlations between test weeks was high at > 0.67. The first eigenvalue of the genetic covariance matrix accounted for about 97% of the sum of all the eigenvalues. The flexibility and statistical power of RRM suggest that this model could be an effective method to improve eggshell quality and to reduce losses due to cracked eggs in a breeding plan.

Nonuniform radiation damage in permanent magnet quadrupoles.

PubMed

Danly, C R; Merrill, F E; Barlow, D; Mariam, F G

2014-08-01

We present data that indicate nonuniform magnetization loss due to radiation damage in neodymium-iron-boron Halbach-style permanent magnet quadrupoles. The proton radiography (pRad) facility at Los Alamos uses permanent-magnet quadrupoles for magnifying lenses, and a system recently commissioned at GSI-Darmsdadt uses permanent magnets for its primary lenses. Large fluences of spallation neutrons can be produced in close proximity to these magnets when the proton beam is, intentionally or unintentionally, directed into the tungsten beam collimators; imaging experiments at LANL's pRad have shown image degradation with these magnetic lenses at proton beam doses lower than those expected to cause damage through radiation-induced reduction of the quadrupole strength alone. We have observed preferential degradation in portions of the permanent magnet quadrupole where the field intensity is highest, resulting in increased high-order multipole components.

Health Impact Assessment Impact Characterization Table

EPA Pesticide Factsheets

The potential health impacts of the proposed decision should be characterized based on the following criteria: Direction, Likelihood, Magnitude, Distribution, Severity, Permanence, Strength of Evidence.

[Development of RF coil of permanent magnet mini-magnetic resonance imager and mouse imaging experiments].

PubMed

Hou, Shulian; Xie, Huantong; Chen, Wei; Wang, Guangxin; Zhao, Qiang; Li, Shiyu

2014-10-01

In the development of radio frequency (RF) coils for better quality of the mini-type permanent magnetic resonance imager for using in the small animal imaging, the solenoid RF coil has a special advantage for permanent magnetic system based on analyses of various types.of RF coils. However, it is not satisfied for imaging if the RF coils are directly used. By theoretical analyses of the magnetic field properties produced from the solenoid coil, the research direction was determined by careful studies to raise further the uniformity of the magnetic field coil, receiving coil sensitivity for signals and signal-to-noise ratio (SNR). The method had certain advantages and avoided some shortcomings of the other different coil types, such as, birdcage coil, saddle shaped coil and phased array coil by using the alloy materials (from our own patent). The RF coils were designed, developed and made for keeled applicable to permanent magnet-type magnetic resonance imager, multi-coil combination-type, single-channel overall RF receiving coil, and applied for a patent. Mounted on three instruments (25 mm aperture, with main magnetic field strength of 0.5 T or 1.5 T, and 50 mm aperture, with main magnetic field strength of 0.48 T), we performed experiments with mice, rats, and nude mice bearing tumors. The experimental results indicated that the RF receiving coil was fully applicable to the permanent magnet-type imaging system.

Strength conditions for the elastic structures with a stress error

NASA Astrophysics Data System (ADS)

Matveev, A. D.

2017-10-01

As is known, the constraints (strength conditions) for the safety factor of elastic structures and design details of a particular class, e.g. aviation structures are established, i.e. the safety factor values of such structures should be within the given range. It should be noted that the constraints are set for the safety factors corresponding to analytical (exact) solutions of elasticity problems represented for the structures. Developing the analytical solutions for most structures, especially irregular shape ones, is associated with great difficulties. Approximate approaches to solve the elasticity problems, e.g. the technical theories of deformation of homogeneous and composite plates, beams and shells, are widely used for a great number of structures. Technical theories based on the hypotheses give rise to approximate (technical) solutions with an irreducible error, with the exact value being difficult to be determined. In static calculations of the structural strength with a specified small range for the safety factors application of technical (by the Theory of Strength of Materials) solutions is difficult. However, there are some numerical methods for developing the approximate solutions of elasticity problems with arbitrarily small errors. In present paper, the adjusted reference (specified) strength conditions for the structural safety factor corresponding to approximate solution of the elasticity problem have been proposed. The stress error estimation is taken into account using the proposed strength conditions. It has been shown that, to fulfill the specified strength conditions for the safety factor of the given structure corresponding to an exact solution, the adjusted strength conditions for the structural safety factor corresponding to an approximate solution are required. The stress error estimation which is the basis for developing the adjusted strength conditions has been determined for the specified strength conditions. The adjusted strength conditions presented by allowable stresses are suggested. Adjusted strength conditions make it possible to determine the set of approximate solutions, whereby meeting the specified strength conditions. Some examples of the specified strength conditions to be satisfied using the technical (by the Theory of Strength of Materials) solutions and strength conditions have been given, as well as the examples of stress conditions to be satisfied using approximate solutions with a small error.

8 CFR 1245.8 - Adjustment of status as a special immigrant under section 101(a)(27)(K) of the Act.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Adjustment of status as a special immigrant... PERSON ADMITTED FOR PERMANENT RESIDENCE § 1245.8 Adjustment of status as a special immigrant under... special immigrant under section 101(a)(27)(K) of the Act must file a Form I-485, Application to Register...

8 CFR 1245.3 - Adjustment of status under section 13 of the Act of September 11, 1957, as amended.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Adjustment of status under section 13 of... OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 1245.3 Adjustment of status under section 13 of the Act of September 11, 1957, as amended. Any application for benefits under section 13 of the Act of...

8 CFR 1209.1 - Adjustment of status of refugees.

Code of Federal Regulations, 2011 CFR

2011-01-01

... to establish compliance with the vaccination requirements described under section 212(a)(1)(A)(ii) of the Act, by submitting with the adjustment of status application a vaccination supplement, completed... right to renew the request for permanent residence in removal proceedings under section 240 of the Act...

8 CFR 1209.1 - Adjustment of status of refugees.

Code of Federal Regulations, 2010 CFR

2010-01-01

... to establish compliance with the vaccination requirements described under section 212(a)(1)(A)(ii) of the Act, by submitting with the adjustment of status application a vaccination supplement, completed... right to renew the request for permanent residence in removal proceedings under section 240 of the Act...

The Mediational Role of Cognitive Emotion Regulation Strategies in the Relationship of Ego-strength and Adjustment to Infertility in Women.

PubMed

Teimourpour, Negar; Besharat, Mohammad Ali; Rahiminezhad, Abbas; Hossein Rashidi, Batool; Gholamali Lavasani, Masoud

2015-06-01

Infertility is considered as an intense and prolonged stressful experience. Despite of high prevalence of infertility and its emotional burden for couples and especially for women, the knowledge regarding psychological factors influencing adjustment to it is limited. The aim of the present study was to investigate the mediational role of cognitive emotion regulation strategies in the relationship of ego-strength and adjustment to infertility in women. A total number of 275 women with primary infertility referring to Valie-asr Reproductive Health Research Center (Tehran Imam Khomeini Hospital) participated in the present study. Data was collected via demographic information questionnaire, Ego-Strength Scale (ESS), Cognitive Emotion Regulation Questionnaire (CERQ) and Adjustment to Illness Scale (AIS). Data were analysed using Pearson correlation and path analysis methods Using SPSS (18) and LISREL (8.5) software. RESULTS indicated there are significant positive correlation between ego-strength and adjustment to infertility (r = 0.44, p < 0.01). Also Adjustment has significant positive correlation withadaptive emotion regulation strategies (r = 0.38, p < 0.01) and significant negative correlation with non-adaptive emotion regulation strategies (r = -0.43, p < 0.01). RESULTS of path analysis indicated emotion regulation strategies mediate the relationship of ego-strength and adjustment. These results can be helpful in making preventive policies, identifying high risk patients and planning psychological interventions.

ASSOCIATION OF KNEE PAIN WITH A REDUCTION IN THIGH MUSCLE STRENGTH – A CROSS-SECTIONAL ANALYSIS INCLUDING 4553 OSTEOARTHRITIS INITIATIVE PARTICIPANTS

PubMed Central

Ruhdorfer, Anja; Wirth, Wolfgang; Eckstein, Felix

2016-01-01

Objective To cross-sectionally determine the quantitative relationship of age-adjusted, sex-specific isometric knee extensor and flexor strength to patient-reported knee pain. Methods Difference of thigh muscle strength by age, and that of age-adjusted strength per unit increase on the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) knee pain scale, was estimated from linear regression analysis of 4553 Osteoarthritis Initiative participants (58% women). Strata encompassing the minimal clinically important difference (MCID) in knee pain were compared to evaluate a potentially non-linear relationship between WOMAC pain levels and muscle strength. Results In Osteoarthritis Initiative participants without pain, the age-related difference in isometric knee extensor strength was −9.0%/−8.2% (women/men) per decade, and that of flexor strength was −11%/−6.9%. Differences in age-adjusted strength values for each unit of WOMAC pain (1/20) amounted to −1.9%/−1.6% for extensor and −2.5%/−1.7% for flexor strength. Differences in torque/weight for each unit of WOMAC pain ranged from −3.3 to − 2.1%. There was no indication of a non-linear relationship between pain and strength across the range of observed WOMAC values, and similar results were observed in women and men. Conclusion Each increase by 1/20 units in WOMAC pain was associated with a ~2% lower age-adjusted isometric extensor and flexor strength in either sex. As a reduction in muscle strength is known to prospectively increase symptoms in knee osteoarthritis and as pain appears to reduce thigh muscle strength, adequate therapy of pain and muscle strength is required in knee osteoarthritis patients to avoid a vicious circle of self-sustaining clinical deterioration. PMID:27836675

Association Between Chewing Difficulty and Symptoms of Depression in Adults: Results from the Korea National Health and Nutrition Examination Survey.

PubMed

Shin, Hye-Sun; Ahn, Yong-Soon; Lim, Do-Seon

2016-12-01

To assess the association between chewing difficulty and symptoms of depression in a representative sample of the Korean population. Cross-sectional. Korea National Health and Nutrition Examination Survey (KNHANES). KNHANES participants (N = 5,158). Chewing difficulty was assessed according to the self-reported presence of chewing problems using a structured questionnaire. Symptoms of depression were defined as having feelings of sadness or depression consecutively over 2 weeks during the last 12 months. Multivariable logistic regression analysis was used to determine the adjusted odds ratios (AORs) and 95% confidence intervals (CIs) of the associations between chewing difficulty and symptoms of depression, adjusted for age; sex; monthly household income; education; number of teeth; number of decayed, missing, or filled permanent teeth; periodontitis; state of dentition; tooth brushing frequency; regular dental visits; smoking status; alcohol consumption; hypertension; diabetes mellitus; and obesity. The interaction effects between chewing difficulty and confounders were evaluated, and age- and sex-stratified analyses were performed. There was a significant positive association between chewing difficulty and symptoms of depression in the fully adjusted model (AOR = 1.86, 95% CI = 1.48-2.33). The strength of the association was highest in men aged 60 and older (AOR = 3.28, 95% CI = 1.54-7.00). Chewing difficulty was independently associated with symptoms of depression in a representative sample of Korean adults. © 2016, Copyright the Authors Journal compilation © 2016, The American Geriatrics Society.

Marital formation in individuals with work-related permanent impairment.

PubMed

Scott-Marshall, Heather; Tompa, Emile; Liao, Qing; Fang, Miao

2013-01-01

Prior studies on the impact of disabling work injury have neglected social support as a key mediating factor. This study investigates how permanent impairment from a work injury affects marital formation, an indicator of social support and integration with the potential to affect psychosocial adjustment and the resumption of productive social roles following work injury. Adjusting for socio-demographic and economic factors associated with marriage ability, we expect that individuals with a work-related permanent impairment will have a lower rate of marital formation compared to their non-injured counterparts. Drawing on a linkage of workers' compensation claims data with income tax information, we undertake a duration modeling analysis comparing workers who have sustained a workplace injury with a matched sample of non-injured controls to examine time to marital formation in each group. Women who suffered a disabling work injury were 17% less likely to marry relative to controls. High levels of physical impairment reduced the rate of marriage in women by 22%. We did not find an effect of impairment on marriage probability in models adjusted for income in men. Our findings underscore the importance of examining the social and interpersonal consequences of work injury, factors not currently addressed by the occupational rehabilitation system. Copyright © 2013 Elsevier Inc. All rights reserved.

The correlation between ostomy knowledge and self-care ability with psychosocial adjustment in Chinese patients with a permanent colostomy: a descriptive study .

PubMed

Cheng, Fang; Meng, Ai-feng; Yang, Li-Fang; Zhang, Yi-nan

2013-07-01

A colostomy can have a negative impact on patient quality of life. Research suggests that psychosocial adaptation is positively associated with quality of life, but few reports address this adaptation and its related factors in patients with a permanent colostomy. A 4-month, descriptive study was conducted to assess the impact of ostomy knowledge and ability to self-care on the psychosocial adjustment of 54 Chinese outpatients (47 men, 14 participants 40 to 50 years old, 40 participants 50 to 70 years old) with a permanent colostomy to investigate the correlation between stoma knowledge, self-care ability, and psychosocial adjustment. Assessment instruments included a sociodemographic data questionnaire and a Chinese translation of the Ostomy Adjustment Inventory-23 that comprises 20 items in three domains (positive emotions, negative emotions, and social life). Participants rated statements on a scale from 0 (totally disagree) to 4 (totally agree); a score of 40 indicates a low level of psychosocial adjustment. Participants also completed the Stoma-related Knowledge Scale, comprising 14 5-point Likert scale questions where low scores indicate low knowledge, and they answered one question regarding self-care ability. Data were analyzed using statistical software for social science. The average stoma-related knowledge score suggested moderate levels of knowledge (45.112 ± 13.358). Twenty (20) participants managed all stoma care aspects independently, 30 required some assistance, and four (4) required care by someone else. The three domains of psychosocial adjustment scores (positive emotions, negative emotions, and social life) were 17.60 ± 4.093,12.92 ± 3.440, and 19.15 ± 6.316, respectively. Knowledge and the three domains of psychosocial adjustment were positively correlated with positive emotion (r = .610, P = 0.001), negative emotion (r = .696, P = 0.000), and social life adjustment (r = .617, P = 0.001). A significant difference in psychosocial adjustment scores was found between persons who did (57.37 ± 9.81) and those that did not (47.83 ± 8.18) independently care for their own stoma (P = 0.005). Persons with high levels of knowledge and independence had a high level of psychosocial adjustment. Providing knowledge and emphasizing/teaching self-care may help persons with a colostomy make the necessary daily and social life adaptations.

Apparatus for electrohydrodynamically assembling patterned colloidal structures

NASA Technical Reports Server (NTRS)

Trau, Mathias (Inventor); Aksay, Ilhan A. (Inventor); Saville, Dudley A. (Inventor)

2000-01-01

A method apparatus is provided for electrophoretically depositing particles onto an electrode, and electrohydrodynamically assembling the particles into crystalline structures. Specifically, the present method and apparatus creates a current flowing through a solution to cause identically charged electrophoretically deposited colloidal particles to attract each other over very large distances (<5 particle diameters) on the surface of electrodes to form two-dimensional colloidal crystals. The attractive force can be created with both DC and AC fields and can modulated by adjusting either the field strength or frequency of the current. Modulating this lateral attraction between the particles causes the reversible formation of two-dimensional fluid and crystalline colloidal states on the electrode surface. Further manipulation allows for the formation of two or three-dimensional colloidal crystals, as well as more complex designed structures. Once the required structures are formed, these three-dimension colloidal crystals can be permanently frozen or glued by controlled coagulation induced by to the applied field to form a stable crystalline structure.

Method for electrohydrodynamically assembling patterned colloidal structures

NASA Technical Reports Server (NTRS)

Trau, Mathias (Inventor); Aksay, Ilhan A. (Inventor); Saville, Dudley A. (Inventor)

1999-01-01

A method apparatus is provided for electrophoretically depositing particles onto an electrode, and electrohydrodynamically assembling the particles into crystalline structures. Specifically, the present method and apparatus creates a current flowing through a solution to cause identically charged electrophoretically deposited colloidal particles to attract each other over very large distances (<5 particle diameters) on the surface of electrodes to form two-dimensional colloidal crystals. The attractive force can be created with both DC and AC fields and can modulated by adjusting either the field strength or frequency of the current. Modulating this lateral attraction between the particles causes the reversible formation of two-dimensional fluid and crystalline colloidal states on the electrode surface. Further manipulation allows for the formation of two or three-dimensional colloidal crystals, as well as more complex designed structures. Once the required structures are formed, these three-dimension colloidal crystals can be permanently frozen or glued by controlled coagulation induced by to the applied field to form a stable crystalline structure.

The Effectiveness of the Strength-Centered Career Adjustment Model for Dual-Career Women in Taiwan

ERIC Educational Resources Information Center

Wang, Yu-Chen; Tien, Hsiu-Lan Shelley

2011-01-01

The authors investigated the effectiveness of a Strength-Centered Career Adjustment Model for dual-career women (N = 28). Fourteen women in the experimental group received strength-centered career counseling for 6 to 8 sessions; the 14 women in the control group received test services in 1 to 2 sessions. All participants completed the Personal…

Method and apparatus for lead-unity-lag electric power generation system

NASA Technical Reports Server (NTRS)

Ganev, Evgeni (Inventor); Warr, William (Inventor); Salam, Mohamed (Arif) (Inventor)

2013-01-01

A method employing a lead-unity-lag adjustment on a power generation system is disclosed. The method may include calculating a unity power factor point and adjusting system parameters to shift a power factor angle to substantially match an operating power angle creating a new unity power factor point. The method may then define operation parameters for a high reactance permanent magnet machine based on the adjusted power level.

Screen time viewing behaviors and isometric trunk muscle strength in youth.

PubMed

Grøntved, Anders; Ried-Larsen, Mathias; Froberg, Karsten; Wedderkopp, Niels; Brage, Søren; Kristensen, Peter Lund; Andersen, Lars Bo; Møller, Niels Christian

2013-10-01

The objective of this study was to examine the association of screen time viewing behavior with isometric trunk muscle strength in youth. A cross-sectional study was carried out including 606 adolescents (14-16 yr old) participating in the Danish European Youth Heart Study, a population-based study with assessments conducted in either 1997/1998 or 2003/2004. Maximal voluntary contractions during isometric back extension and abdominal flexion were determined using a strain gauge dynamometer, and cardiorespiratory fitness (CRF) was obtained using a maximal cycle ergometer test. TV viewing time, computer use, and other lifestyle behaviors were obtained by self-report. Analyses of association of screen use behaviors with isometric trunk muscle strength were carried out using multivariable adjusted linear regression. The mean (SD) isometric strength was 0.87 (0.16) N·kg-1. TV viewing, computer use, and total screen time use were inversely associated with isometric trunk muscle strength in analyses adjusted for lifestyle and sociodemographic factors. After further adjustment for CRF and waist circumference, associations remained significant for computer use and total screen time, but TV viewing was only marginally associated with muscle strength after these additional adjustments (-0.05 SD (95% confidence interval, -0.11 to 0.005) difference in strength per 1 h·d-1 difference in TV viewing time, P = 0.08). Each 1 h·d-1 difference in total screen time use was associated with -0.09 SD (95% confidence interval, -0.14 to -0.04) lower isometric trunk muscle strength in the fully adjusted model (P = 0.001). There were no indications that the association of screen time use with isometric trunk muscle strength was attenuated among highly fit individuals (P = 0.91 for CRF by screen time interaction). Screen time use was inversely associated with isometric trunk muscle strength independent of CRF and other confounding factors.

Magnetically-driven medical robots: An analytical magnetic model for endoscopic capsules design

NASA Astrophysics Data System (ADS)

Li, Jing; Barjuei, Erfan Shojaei; Ciuti, Gastone; Hao, Yang; Zhang, Peisen; Menciassi, Arianna; Huang, Qiang; Dario, Paolo

2018-04-01

Magnetic-based approaches are highly promising to provide innovative solutions for the design of medical devices for diagnostic and therapeutic procedures, such as in the endoluminal districts. Due to the intrinsic magnetic properties (no current needed) and the high strength-to-size ratio compared with electromagnetic solutions, permanent magnets are usually embedded in medical devices. In this paper, a set of analytical formulas have been derived to model the magnetic forces and torques which are exerted by an arbitrary external magnetic field on a permanent magnetic source embedded in a medical robot. In particular, the authors modelled cylindrical permanent magnets as general solution often used and embedded in magnetically-driven medical devices. The analytical model can be applied to axially and diametrically magnetized, solid and annular cylindrical permanent magnets in the absence of the severe calculation complexity. Using a cylindrical permanent magnet as a selected solution, the model has been applied to a robotic endoscopic capsule as a pilot study in the design of magnetically-driven robots.

Transcervical Sterilization: A Comparison of Essure® Permanent Birth Control System and Adiana® Permanent Contraception System

PubMed Central

Palmer, Sophia N; Greenberg, James A

2009-01-01

Transcervical sterilization has moved female sterilization from a minimally invasive laparoscopic technique, which requires entry into the abdominal cavity, to a less invasive hysteroscopic procedure. Along with the decreased potential for complications, its ease of performance with minimal anesthesia has facilitated a move from the operating room to the office. This review compares the available data on transcervical sterilization procedures to better understand the strengths and weakness of each system. PMID:19609402

Separation of alpha-lactalbumin grafted- and non-grafted maghemite core/silica shell nanoparticles by capillary zone electrophoresis.

PubMed

Petr, Jan; Teste, Bruno; Descroix, Stéphanie; Siaugue, Jean-Michel; Gareil, Pierre; Varenne, Anne

2010-08-01

The use of nanoparticles (NPs) in immunodiagnostics is a challenging task for many reasons, including the need for miniaturization. In view of the development of an assay dedicated to an original, miniaturized and fully automated immunodiagnostics which aims to mimic in vivo interactions, magnetic zwitterionic bifunctional amino/polyethyleneoxide maghemite core/silica shell NPs functionalized with allergenic alpha-lactalbumin were characterized by CE. Proper analytical performances were obtained through semi-permanent capillary coating with didodecyldimethylammonium bromide (DDAB) or permanent capillary wall modification by hydroxypropylcellulose. The influence of experimental conditions (e.g. buffer component nature, pH, ionic strength, and electric field strength) on sample stability, electrophoretic mobility, and dispersion was investigated using either DDAB- or hydroxypropylcellulose-coated capillaries. Adsorption to the capillary wall and aggregation phenomena were evaluated according to the CE conditions. The proper choice of experimental conditions, i.e. separation under -10 kV in a 25 mM ionic strength MES/NaOH (pH 6.0) with a DDAB-coated capillary, allowed the separation of the grafted and the non-grafted NPs.

77 FR 76352 - Adjustment of Status of Refugees and Aliens Granted Asylum

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-28

... is not admissible to the United States as described in 8 CFR 209.2(a)(1)(v), may, under section 209(c..., shall be eligible for adjustment without regard to the foreign residence requirement if otherwise... admission for lawful permanent residence as of the date one year before the date of the approval of the...

Adjustment of measures of strength and power in youth male athletes differing in body mass and maturation.

PubMed

Meylan, Cesar Marius; Cronin, John; Hopkins, Will G; Oliver, Jonathan

2014-02-01

Adjustment for body mass and maturation of strength, power, and velocity measures of young athletes is important for talent development. Seventy-four youth male athletes performed a ballistic leg press test at five loads relative to body mass. The data were analyzed in maturity groups based on years from peak height velocity: -2.5 to -0.9 y (n = 29); -1.0 to 0.4 y (n = 28); and 0.5 to 2.0 y (n = 16). Allometric scaling factors representing percent difference in performance per percent difference in body mass were derived by linear regression of log-transformed variables, which also permitted adjustment of performance for body mass. Standardized differences between groups were assessed via magnitude-based inference. Strength and power measures showed a greater dependency on body mass than velocity-related variables (scaling factors of 0.56-0.85 vs. 0.42-0.14%/%), but even after adjustment for body mass most differences in strength and power were substantial (7-44%). In conclusion, increases in strength and power with maturation are due only partly to increases in body mass. Such increases, along with appropriate adjustment for body mass, need to be taken into account when comparing performance of maturing athletes.

Ego strengths, racial/ethnic identity, and well-being among North American Indian/First Nations adolescents.

PubMed

Gfellner, Barbara

2016-01-01

This study investigated associations between ego strengths (psychosocial development), racial/ethnic identity using Multi-Ethnic Identity Measure-Revised (exploration, commitment) and Multidimensional Measure of Racial Identity (centrality, private regard, public regard) dimensions, and personal adjustment/well-being among 178 North American Indian/First Nations adolescents who resided and attended school on reserves. As predicted, ego strengths related directly with centrality, private regard, and the adjustment measures; the moderation of ego strengths for exploration, commitment, and private regard reflected adverse functioning for those with less than advanced ego strengths. As well, ego strengths mediated associations between centrality and private regard with several measures of personal well-being. Practical and theoretical implications are considered.

Avoiding treatment bias of REDD+ monitoring by sampling with partial replacement.

PubMed

Köhl, Michael; Scott, Charles T; Lister, Andrew J; Demon, Inez; Plugge, Daniel

2015-12-01

Implementing REDD+ renders the development of a measurement, reporting and verification (MRV) system necessary to monitor carbon stock changes. MRV systems generally apply a combination of remote sensing techniques and in-situ field assessments. In-situ assessments can be based on 1) permanent plots, which are assessed on all successive occasions, 2) temporary plots, which are assessed only once, and 3) a combination of both. The current study focuses on in-situ assessments and addresses the effect of treatment bias, which is introduced by managing permanent sampling plots differently than the surrounding forests. Temporary plots are not subject to treatment bias, but are associated with large sampling errors and low cost-efficiency. Sampling with partial replacement (SPR) utilizes both permanent and temporary plots. We apply a scenario analysis with different intensities of deforestation and forest degradation to show that SPR combines cost-efficiency with the handling of treatment bias. Without treatment bias permanent plots generally provide lower sampling errors for change estimates than SPR and temporary plots, but do not provide reliable estimates, if treatment bias occurs, SPR allows for change estimates that are comparable to those provided by permanent plots, offers the flexibility to adjust sample sizes in the course of time, and allows to compare data on permanent versus temporary plots for detecting treatment bias. Equivalence of biomass or carbon stock estimates between permanent and temporary plots serves as an indication for the absence of treatment bias while differences suggest that there is evidence for treatment bias. SPR is a flexible tool for estimating emission factors from successive measurements. It does not entirely depend on sample plots that are installed at the first occasion but allows for the adjustment of sample sizes and placement of new plots at any occasion. This ensures that in-situ samples provide representative estimates over time. SPR offers the possibility to increase sampling intensity in areas with high degradation intensities or to establish new plots in areas where permanent plots are lost due to deforestation. SPR is also an ideal approach to mitigate concerns about treatment bias.

Peak expiratory flow mediates the relationship between handgrip strength and timed up and go performance in elderly women, but not men.

PubMed

Ritti-Dias, Raphael Mendes; Cucato, Gabriel Grizzo; de Mello Franco, Fábio Gazelato; Cendoroglo, Maysa Seabra; Nasri, Fábio; Monteiro-Costa, Maria Luiza; de Carvalho, José Antonio Maluf; de Matos, Luciana Diniz Nagem Janot

2016-09-01

The aim of the present study was to verify if there is sex difference in the associations among handgrip strength, peak expiratory flow (PEF) and timed up and go (TUG) test results. The sample included 288 consecutive elderly men (n=93) and women (n=195). Functional capacity was measured using the TUG test, and muscle strength was measured based on handgrip. Moreover, as a measure of current health status, PEF was evaluated. Linear regression procedures were performed to analyze the relationships between handgrip and both PEF and TUG test results, with adjustment for confounders, and to identify the possible mediating role of PEF in the association between handgrip strength and TUG test results. In men, handgrip strength was associated with both PEF and TUG performance (p<0.01). After adjustment for PEF, the relationship between handgrip strength and TUG performance remained significant. In women, handgrip strength was also associated with both PEF and TUG performance (p<0.01). However, after adjustment for PEF, the relationship between handgrip strength and TUG performance was no longer significant. Mobility in the elderly is sex dependent. In particular, PEF mediates the relationship between handgrip strength and TUG performance in women, but not in men.

Design and simulation of permanent magnet synchronous motor control system

NASA Astrophysics Data System (ADS)

Li, Li; Liu, Yongqiu

2018-06-01

In recent years, with the development of power electronics, microelectronics, new motor control theory and rare earth permanent magnet materials, permanent magnet synchronous motors have been rapidly applied. Permanent magnet synchronous motors have the advantages of small size, low loss and high efficiency. Today, energy conservation and environmental protection are increasingly valued. It is very necessary to study them. Permanent magnet synchronous motor control system has a wide range of application prospects in the fields of electric vehicles, ships and other transportation. Using the simulation function of MATLAB/SIMULINK, a modular design structure was used to simulate the whole system model of speed loop adjustment, current PI modulation, SVPWM (Space Vector Pulse Width Module) wave generation and double closed loop. The results show that this control method has good robustness, and this method can improve the design efficiency and shorten the system design time. In this article, the analysis of the control principle of modern permanent magnet synchronous motor and the various processes of MATLAB simulation application will be analyzed in detail. The basic theory, basic method and application technology of the permanent magnet synchronous motor control system are systematically introduced.

Manipulation of permanent magnetic polymer micro-robots: a new approach towards guided wireless capsule endoscopy

NASA Astrophysics Data System (ADS)

Hilbich, D.; Rahbar, A.; Khosla, A.; Gray, B. L.

2012-10-01

We present the initial experimental results for manipulating micro-robots featuring permanent magnetic polymer magnets for guided wireless endoscopy applications. The magnetic polymers are fabricated by doping polydimethylsiloxane (PDMS) with permanent isotropic rare earth magnetic powder (MQFP 12-5) with an average particle size of 6 μm. The prepared magnetic nanocomposite polymer (M-NCP) is patterned in the desired shape against a plexiglass mold via soft lithography techniques. It is observed that the fabricated micro-robot magnets have a magnetic field strength of 50 mT and can easily be actuated by applying a field of 8.3 mT (field measured at the capsule's position) and moved at a rate of 5 inches/second.

8 CFR 1245.21 - Adjustment of status of certain nationals of Vietnam, Cambodia, and Laos (section 586 of Public...

Code of Federal Regulations, 2010 CFR

2010-01-01

... Service may adjust the status to that of a lawful permanent resident, a native or citizen of Vietnam...) Application period. The application period lasts from January 27, 2003 until January 25, 2006. The Service... will be evaluated in the following manner: (i) If the postmark is illegible or missing, the Service...

Spiritual Well-Being and Dyadic Adjustment: Mediator Effects for Family Strengths

PubMed Central

Ghaffari, Majid

2016-01-01

Objectives The aim of the present study was to test a structural model of hypothesized relationships between spiritual well-being, intervening variables of personal worth of self and others, commitment to relationship stability, commitment to relationship growth, positive interaction/appreciation, communication/conflict resolution, time spent together, and, the dependent variable, dyadic adjustment. Materials and Methods Two hundred and sixty eight (171 females and 97 males) married parent subjects were selected by convenience sampling from three universities in Mazandaran, Iran, to take part in this study. They were all volunteers and were not paid and their age range was 23 to 47 (31.07 ± 4.37 years). All participants were asked to complete the spiritual well-being scale (SWBS), family strengths scale (FSS) and revised dyadic adjustment scale (RDAS). Results The results from structural equation modeling confirmed a hierarchy for the development of family strengths, and indicated that spiritual well-being and strength in most characteristics affected dyadic adjustment, positively (P <0.05). Conclusions Couples’ level of dyadic adjustment is increased when they have higher spiritual well-being, value each other, have commitment to each other, communicate well, enjoy being with each other, and spend time together. PMID:27822273

Spiritual Well-Being and Dyadic Adjustment: Mediator Effects for Family Strengths.

PubMed

Ghaffari, Majid

2016-09-01

The aim of the present study was to test a structural model of hypothesized relationships between spiritual well-being, intervening variables of personal worth of self and others, commitment to relationship stability, commitment to relationship growth, positive interaction/appreciation, communication/conflict resolution, time spent together, and, the dependent variable, dyadic adjustment. Two hundred and sixty eight (171 females and 97 males) married parent subjects were selected by convenience sampling from three universities in Mazandaran, Iran, to take part in this study. They were all volunteers and were not paid and their age range was 23 to 47 (31.07 ± 4.37 years). All participants were asked to complete the spiritual well-being scale (SWBS), family strengths scale (FSS) and revised dyadic adjustment scale (RDAS). The results from structural equation modeling confirmed a hierarchy for the development of family strengths, and indicated that spiritual well-being and strength in most characteristics affected dyadic adjustment, positively (P <0.05). Couples' level of dyadic adjustment is increased when they have higher spiritual well-being, value each other, have commitment to each other, communicate well, enjoy being with each other, and spend time together.

Adjusting for publication biases across similar interventions performed well when compared with gold standard data.

PubMed

Moreno, Santiago G; Sutton, Alex J; Ades, A E; Cooper, Nicola J; Abrams, Keith R

2011-11-01

To extend, apply, and evaluate a regression-based approach to adjusting meta-analysis for publication and related biases. The approach uses related meta-analyses to improve estimation by borrowing strength on the degree of bias. The proposed adjustment approach is described. Adjustments are applied both independently and by borrowing strength across journal-extracted data on the effectiveness of 12 antidepressant drugs from placebo-controlled trials. The methods are also applied to Food and Drug Administration (FDA) data obtained on the same 12 drugs. Results are compared, viewing the FDA observed data as gold standard. Estimates adjusted for publication biases made independently for each drug were very uncertain using both the journal and FDA data. Adjusted estimates were much more precise when borrowing strength across meta-analyses. Reassuringly, adjustments in this way made to the journal data agreed closely with the observed estimates from the FDA data, while the adjusted FDA results changed only minimally from those observed from the FDA data. The method worked well in the case study considered and therefore further evaluation is encouraged. It is suggested that this approach may be especially useful when adjusting several meta-analyses on similar interventions and outcomes, particularly when there are small numbers of studies. Copyright © 2011 Elsevier Inc. All rights reserved.

The Numerical Calculation and Experimental Measurement of the Inductance Parameters for Permanent Magnet Synchronous Motor in Electric Vehicle

NASA Astrophysics Data System (ADS)

Jiang, Chao; Qiao, Mingzhong; Zhu, Peng

2017-12-01

A permanent magnet synchronous motor with radial magnetic circuit and built-in permanent magnet is designed for the electric vehicle. Finite element numerical calculation and experimental measurement are adopted to obtain the direct axis and quadrature axis inductance parameters of the motor which are vital important for the motor control. The calculation method is simple, the measuring principle is clear, the results of numerical calculation and experimental measurement are mutual confirmation. A quick and effective method is provided to obtain the direct axis and quadrature axis inductance parameters of the motor, and then improve the design of motor or adjust the control parameters of the motor controller.

Relationship between agility and lower limb muscle strength, targeting university badminton players.

PubMed

Sonoda, Takuya; Tashiro, Yuto; Suzuki, Yusuke; Kajiwara, Yu; Zeidan, Hala; Yokota, Yuki; Kawagoe, Mirei; Nakayama, Yasuaki; Bito, Tsubasa; Shimoura, Kanako; Tatsumi, Masataka; Nakai, Kengo; Nishida, Yuichi; Yoshimi, Soyoka; Aoyama, Tomoki

2018-02-01

[Purpose] Targeting university badminton players, this study investigated the relationship between agility, which is associated with performance in badminton, and lower limb muscle strength, and examined which muscles influence agility. [Subjects and Methods] A total of 23 male university badminton players were evaluated for side-shuffle test scores and lower limb strength. The relationships between agility, lower limb strength, and duration of experience playing badminton were evaluated using a correlation analysis. Moreover, the relationship between agility and lower limb strength was evaluated by partial correlation analysis, adjusting for the effects of experience of each badminton player. [Results] The agility score correlated with hip extension and ankle plantar flexion strength, with adjustment for badminton experience. [Conclusion] This study suggests that hip extension training and improvement in ankle plantar flexion strength may improve agility.

8 CFR 245.13 - Adjustment of status of certain nationals of Nicaragua and Cuba under Public Law 105-100.

Code of Federal Regulations, 2010 CFR

2010-01-01

... of Nicaragua and Cuba under Public Law 105-100. 245.13 Section 245.13 Aliens and Nationality... PERMANENT RESIDENCE § 245.13 Adjustment of status of certain nationals of Nicaragua and Cuba under Public... section 241(a)(5) of the Act, if the alien: (1) Is a national of Nicaragua or Cuba; (2) Except as provided...

8 CFR 245.13 - Adjustment of status of certain nationals of Nicaragua and Cuba under Public Law 105-100.

Code of Federal Regulations, 2011 CFR

2011-01-01

... of Nicaragua and Cuba under Public Law 105-100. 245.13 Section 245.13 Aliens and Nationality... PERMANENT RESIDENCE § 245.13 Adjustment of status of certain nationals of Nicaragua and Cuba under Public... section 241(a)(5) of the Act, if the alien: (1) Is a national of Nicaragua or Cuba; (2) Except as provided...

8 CFR 1245.21 - Adjustment of status of certain nationals of Vietnam, Cambodia, and Laos (section 586 of Public...

Code of Federal Regulations, 2012 CFR

2012-01-01

... of Vietnam, Cambodia, and Laos (section 586 of Public Law 106-429). 1245.21 Section 1245.21 Aliens... certain nationals of Vietnam, Cambodia, and Laos (section 586 of Public Law 106-429). (a) Eligibility. The Service may adjust the status to that of a lawful permanent resident, a native or citizen of Vietnam...

8 CFR 1245.21 - Adjustment of status of certain nationals of Vietnam, Cambodia, and Laos (section 586 of Public...

Code of Federal Regulations, 2013 CFR

2013-01-01

... of Vietnam, Cambodia, and Laos (section 586 of Public Law 106-429). 1245.21 Section 1245.21 Aliens... certain nationals of Vietnam, Cambodia, and Laos (section 586 of Public Law 106-429). (a) Eligibility. The Service may adjust the status to that of a lawful permanent resident, a native or citizen of Vietnam...

8 CFR 1245.21 - Adjustment of status of certain nationals of Vietnam, Cambodia, and Laos (section 586 of Public...

Code of Federal Regulations, 2014 CFR

2014-01-01

... of Vietnam, Cambodia, and Laos (section 586 of Public Law 106-429). 1245.21 Section 1245.21 Aliens... certain nationals of Vietnam, Cambodia, and Laos (section 586 of Public Law 106-429). (a) Eligibility. The Service may adjust the status to that of a lawful permanent resident, a native or citizen of Vietnam...

8 CFR 1245.21 - Adjustment of status of certain nationals of Vietnam, Cambodia, and Laos (section 586 of Public...

Code of Federal Regulations, 2011 CFR

2011-01-01

... of Vietnam, Cambodia, and Laos (section 586 of Public Law 106-429). 1245.21 Section 1245.21 Aliens... certain nationals of Vietnam, Cambodia, and Laos (section 586 of Public Law 106-429). (a) Eligibility. The Service may adjust the status to that of a lawful permanent resident, a native or citizen of Vietnam...

Clinical Implications for Muscle Strength Differences in Women of Different Age and Racial Groups: The WIN Study.

PubMed

Trudelle-Jackson, Elaine; Ferro, Emerenciana; Morrow, James R

2011-01-01

BACKGROUND: Reduction in muscle strength is strongly associated with functional decline in women, and women with lower quadriceps strength adjusted for body weight are more likely to develop knee osteoarthritis. OBJECTIVE: To compare body weight--adjusted strength among women of different age/racial groups. STUDY DESIGN: Cross-sectional study of muscle strength in 918 women aged 20--83 (M ± SD = 52 ± 13). METHODS: An orthopedic examination was conducted including measurement of handgrip and lower extremity strength (hip abductors/external rotators, knee flexors/extensors). Data were grouped into young (20--39 years, n = 139), middle (40--54 years, n = 300), and older (55+ years, n = 424) ages for white (n = 699) and African American (AA) (n = 164) women. Means and standard deviations for strength adjusted for body weight were calculated for each age and racial group and compared using 2-way multivariate analysis of variance and post hoc tests. RESULTS: No significant age-by-race interaction (P = .092) but significant main effects for age and race (P < .001). Pairwise comparisons revealed significant differences in knee extensor and flexor strength between all age groups. For grip and hip external rotator strength, significant differences were found between the middle and older groups. Differences in hip abductor strength were found between the young and middle-aged groups. AA women had lower strength than white women in all muscle groups (P < .05) except hip external rotators. CONCLUSIONS: Strength decreased with age in all muscle groups but magnitude of decrease varied by muscle. Strengthening programs should target different muscles, depending on a woman's age and race.

Association between dietary protein intake and grip strength among adults aged 51 years and over: What We Eat in America, National Health and Nutrition Examination Survey 2011-2014.

PubMed

Mishra, Suruchi; Goldman, Joseph D; Sahyoun, Nadine R; Moshfegh, Alanna J

2018-01-01

Distributing daily protein intake evenly across meals (∼25-30g/meal) has been suggested to improve muscle mass. The aim of this research is to examine the association between grip strength, total protein intake and its distribution across day's meals in older adults. Nationally representative dietary intake data of adults aged 51 years and older (n = 4,123) who participated in What We Eat in America, NHANES 2011-2014 were analyzed. Protein intake per day and per eating occasion (breakfast, lunch, dinner, and snack) were determined. Combined grip strength was calculated and expressed in kilograms. Grip strength of individuals consuming ≥25g protein at 1 eating occasion was compared with those consuming same level of protein at 2 and 3 or more eating occasions. Grip strength of individuals in quartile 1 of daily protein intake was compared to those in the other quartiles. All associations were examined without and with adjustment for age, race/ethnicity, physical activity, health status, and smoking status. The comparison involving eating occasions and protein intake quartiles were further adjusted for daily protein intake and energy intake, respectively. Only 33% of men and 19% of women had protein intake of ≥25g at 2 or more eating occasions. These individuals also had higher grip strength and daily protein intake. Grip strength was positively associated with consumption of ≥25g protein at 2 eating occasions as compared to consumption of same level of protein at 1 eating occasion (p<0.05) in unadjusted model, but not when adjusted. Grip strength was positively associated with daily protein intake among women in quartiles 3 and 4 (p<0.05) of protein intake in both unadjusted and adjusted models compared to lowest protein intake. Among men, grip strength was associated with daily protein intake in quartiles 3 and 4 (p<0.05) in the unadjusted model, but not when adjusted. In a nationally representative sample of older adults, consuming ≥25g protein at 2 or more eating occasions was not associated with grip strength. However, higher daily protein intake was positively associated with grip strength in women.

Association between dietary protein intake and grip strength among adults aged 51 years and over: What We Eat in America, National Health and Nutrition Examination Survey 2011-2014

PubMed Central

Goldman, Joseph D.; Sahyoun, Nadine R.; Moshfegh, Alanna J.

2018-01-01

Introduction Distributing daily protein intake evenly across meals (∼25–30g/meal) has been suggested to improve muscle mass. The aim of this research is to examine the association between grip strength, total protein intake and its distribution across day’s meals in older adults. Methods Nationally representative dietary intake data of adults aged 51 years and older (n = 4,123) who participated in What We Eat in America, NHANES 2011–2014 were analyzed. Protein intake per day and per eating occasion (breakfast, lunch, dinner, and snack) were determined. Combined grip strength was calculated and expressed in kilograms. Grip strength of individuals consuming ≥25g protein at 1 eating occasion was compared with those consuming same level of protein at 2 and 3 or more eating occasions. Grip strength of individuals in quartile 1 of daily protein intake was compared to those in the other quartiles. All associations were examined without and with adjustment for age, race/ethnicity, physical activity, health status, and smoking status. The comparison involving eating occasions and protein intake quartiles were further adjusted for daily protein intake and energy intake, respectively. Results Only 33% of men and 19% of women had protein intake of ≥25g at 2 or more eating occasions. These individuals also had higher grip strength and daily protein intake. Grip strength was positively associated with consumption of ≥25g protein at 2 eating occasions as compared to consumption of same level of protein at 1 eating occasion (p<0.05) in unadjusted model, but not when adjusted. Grip strength was positively associated with daily protein intake among women in quartiles 3 and 4 (p<0.05) of protein intake in both unadjusted and adjusted models compared to lowest protein intake. Among men, grip strength was associated with daily protein intake in quartiles 3 and 4 (p<0.05) in the unadjusted model, but not when adjusted. Conclusion In a nationally representative sample of older adults, consuming ≥25g protein at 2 or more eating occasions was not associated with grip strength. However, higher daily protein intake was positively associated with grip strength in women. PMID:29364939

An in vitro investigation of pre-treatment effects before fissure sealing.

PubMed

Bagheri, Mahshid; Pilecki, Peter; Sauro, Salvatore; Sherriff, Martyn; Watson, Timothy F; Hosey, Marie Therese

2017-11-01

Fissure sealants prevent occlusal caries in permanent molars. Enamel preparation methods are used before fissure sealing. To investigate effects of bioglass air-abrasion pre-treatment with and without an adhesive, on fissure enamel of permanent teeth, with respect to etchability, microleakage and microtensile bond strength. Half of the occlusal surfaces of 50 extracted premolars underwent bioglass air-abrasion. Dye was applied to the entire occlusal surface. Photographs were taken to score etched surface by dye uptake. Adhesive was applied to 25 of the bioglass-treated areas and all teeth were fissure sealed, sectioned, and evaluated using confocal microscopy. Buccal and lingual surfaces of a further eight premolars were acid-etched and randomly received: air-abrasion, adhesive, both, or none before sealant application for microtensile bond strength measurement in half of the samples immediately and half following 6 months of water immersion. Linear mixed models and multinomial logistic regression were used (P = 0.05). Bioglass air-abrasion significantly improved enamel etchability and reduced microleakage. The addition of an adhesive made no difference to either microleakage or microtensile bond strength. The combination of bioglass abrasion and adhesive led to more cohesive, rather than adhesive, failure. Bioglass air-abrasion improved enamel etchability and reduced microleakage irrespective of the adhesive use but neither pre-treatment affected the microtensile bond strength. © 2017 BSPD, IAPD and John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Case history : use of Tenax and Tensar geogrids for base course stabilization : technical assistance report.

DOT National Transportation Integrated Search

1999-01-01

Geogrids can be used successfully for subgrade stabilization under permanent pavements. To be successful, proper designs incorporating existing soil conditions and anticipated loading need to be performed. subgrade soil strength should be determined ...

Ceramic Inlays: Effect of Mechanical Cycling and Ceramic Type on Restoration-dentin Bond Strength.

PubMed

Trindade, F Z; Kleverlaan, C J; da Silva, L H; Feilzer, A J; Cesar, P F; Bottino, M A; Valandro, L F

2016-01-01

This study aimed to evaluate the bond strength between dentin and five different ceramic inlays in permanent maxillary premolars, with and without mechanical cycling. One hundred permanent maxillary premolars were prepared and divided into 10 groups (n=10) according to the ceramic system (IPS e.Max Press; IPS e.Max CAD; Vita PM9; Vita Mark II; and Vita VM7) and the mechanical cycling factor (with and without [100 N, 2 Hz, 1.2×10(6) cycles]). The inlays were adhesively cemented, and all of the specimens were cut into microbars (1×1 mm, nontrimming method), which were tested under microtensile loading. The failure mode was classified and contact angle, roughness, and microtopographic analyses were performed on each ceramic surface. The mechanical cycling had a significant effect (p=0.0087) on the bond strength between dentin and IPS e.max Press. The Vita Mark II group had the highest bond strength values under both conditions, with mechanical cycling (9.7±1.8 MPa) and without (8.2±1.9 MPa), while IPS e.Max CAD had the lowest values (2.6±1.6 and 2.2±1.4, respectively). The adhesive failure mode at the ceramic/cement interface was the most frequent. Vita Mark II showed the highest value of average roughness. IPS e.max Press and Vita Mark II ceramics presented the lowest contact angles. In conclusion, the composition and manufacturing process of ceramics seem to have an influence on the ceramic surface and resin cement bond strength. Mechanical cycling did not cause significant degradation on the dentin and ceramic bond strength under the configuration used.

Permanent magnetic field, direct electric field, and infrared to reduce blood glucose level and hepatic function in mus musculus with diabetic mellitus

NASA Astrophysics Data System (ADS)

Suhariningsih; Basuki Notobroto, Hari; Winarni, Dwi; Achmad Hussein, Saikhu; Anggono Prijo, Tri

2017-05-01

Blood contains several electrolytes with positive (cation) and negative (anion) ion load. Both electrolytes deliver impulse synergistically adjusting body needs. Those electrolytes give specific effect to external disturbance such as electric, magnetic, even infrared field. A study has been conducted to reduce blood glucose level and liver function, in type 2 Diabetes Mellitus patients, using Biophysics concept which uses combination therapy of permanent magnetic field, electric field, and infrared. This study used 48 healthy mice (mus musculus), male, age 3-4 weeks, with approximately 25-30 g in weight. Mice was fed with lard as high fat diet orally, before Streptozotocin (STZ) induction become diabetic mice. Therapy was conducted by putting mice in a chamber that emits the combination of permanent magnetic field, electric field, and infrared, every day for 1 hour for 28 days. There were 4 combinations of therapy/treatment, namely: (1) permanent magnetic field, direct electric field, and infrared; (2) permanent magnetic field, direct electric field, without infrared; (3) permanent magnetic field, alternating electric field, and infrared; and (4) permanent magnetic field, alternating electric field, without infrared. The results of therapy show that every combination is able to reduce blood glucose level, AST, and ALT. However, the best result is by using combination of permanent magnetic field, direct electric field, and infrared.

Effect of Hygrothermal Aging on the Mechanical Properties of Fluorinated and Nonfluorinated Clay-Epoxy Nanocomposites

PubMed Central

Hamim, Salah U.; Singh, Raman P.

2014-01-01

Hydrophilic nature of epoxy polymers can lead to both reversible and irreversible/permanent changes in epoxy upon moisture absorption. The permanent changes leading to the degradation of mechanical properties due to combined effect of moisture and elevated temperature on EPON 862, Nanomer I.28E, and Somasif MAE clay-epoxy nanocomposites are investigated in this study. The extent of permanent degradation on fracture and flexural properties due to the hygrothermal aging is determined by drying the epoxy and their clay-epoxy nanocomposites after moisture absorption. Significant permanent damage is observed for fracture toughness and flexural modulus, while the extent of permanent damage is less significant for flexural strength. It is also observed that permanent degradation in Somasif MAE clay-epoxy nanocomposites is higher compared to Nanomer I.28E clay-epoxy nanocomposites. Fourier transform infrared (FTIR) spectroscopy revealed that both clays retained their original chemical structure after the absorption-desorption cycle without undergoing significant changes. Scanning electron microscopy (SEM) images of the fracture surfaces provide evidence that Somasif MAE clay particles offered very little resistance to crack propagation in case of redried specimens when compared to Nanomer I.28E counterpart. The reason for the observed higher extent of permanent degradation in Somasif MAE clay-epoxy system has been attributed to the weakening of the filler-matrix interface. PMID:27379285

Effect of Hygrothermal Aging on the Mechanical Properties of Fluorinated and Nonfluorinated Clay-Epoxy Nanocomposites.

PubMed

Hamim, Salah U; Singh, Raman P

2014-01-01

Hydrophilic nature of epoxy polymers can lead to both reversible and irreversible/permanent changes in epoxy upon moisture absorption. The permanent changes leading to the degradation of mechanical properties due to combined effect of moisture and elevated temperature on EPON 862, Nanomer I.28E, and Somasif MAE clay-epoxy nanocomposites are investigated in this study. The extent of permanent degradation on fracture and flexural properties due to the hygrothermal aging is determined by drying the epoxy and their clay-epoxy nanocomposites after moisture absorption. Significant permanent damage is observed for fracture toughness and flexural modulus, while the extent of permanent damage is less significant for flexural strength. It is also observed that permanent degradation in Somasif MAE clay-epoxy nanocomposites is higher compared to Nanomer I.28E clay-epoxy nanocomposites. Fourier transform infrared (FTIR) spectroscopy revealed that both clays retained their original chemical structure after the absorption-desorption cycle without undergoing significant changes. Scanning electron microscopy (SEM) images of the fracture surfaces provide evidence that Somasif MAE clay particles offered very little resistance to crack propagation in case of redried specimens when compared to Nanomer I.28E counterpart. The reason for the observed higher extent of permanent degradation in Somasif MAE clay-epoxy system has been attributed to the weakening of the filler-matrix interface.

Handgrip strength is associated with, but poorly predicts, disability in older women with acute low back pain: A 12-month follow-up study.

PubMed

Felício, Diogo Carvalho; Diz, Juliano Bergamaschine Mata; Pereira, Daniele Sirineu; Queiroz, Bárbara Zille de; Silva, Juscélio Pereira de; Moreira, Bruno de Souza; Oliveira, Vinícius Cunha; Pereira, Leani Souza Máximo

2017-10-01

Older women with low back pain (LBP) constitute a special subpopulation at risk of severe and permanent disability. It is important to identify factors limiting functionality in this population in order to reduce costs and improve both prevention and intervention. Handgrip strength (HGS) is a biomarker of aging associated with several adverse health outcomes, but long-term associations with disability in older patients with LBP are not known. To examine whether HGS predicts disability in older women with acute low back pain (LBP). Longitudinal analyses were conducted with a sample of 135 older women from the international multicenter study Back Complaints in the Elders (BACE-Brazil). Women aged 60 years and over with a new episode of acute LBP were included. HGS was assessed with Jamar ® dynamometer, and disability was assessed using the Roland Morris questionnaire and gait speed test. Variables were assessed at baseline and at 12-month follow-up. Linear regression models explored associations between HGS and disability measures. Significant association was found between HGS at baseline and gait speed at 12-month follow-up (r=-0.24; p=0.004). A multivariable-adjusted model showed that this association was independent of age, body mass index, and pain intensity (adjusted R 2 =0.13; p<0.001). A final prediction model showed an incremental difference of only 2.1% in gait speed after inclusion of HGS as an independent variable. No association was found between HGS and score on the Roland Morris questionnaire. Caution is needed regarding the use of HGS as a predictive measure of disability in older women with acute LBP. Changes in gait speed were very small and unlikely to be of clinical relevance. Copyright © 2017 Elsevier B.V. All rights reserved.

Variation of mechanical properties due to hygrothermal ageing and permanent changes upon redrying in clay/epoxy nanocomposites

NASA Astrophysics Data System (ADS)

Hamim, Salah Uddin Ahmed

2011-12-01

Epoxy polymers are an important class of material for use in various applications. Due to their hydrophilic nature, epoxy resins tend to absorb moisture. Absorption of moisture degrades the functional, structural and mechanical properties. For polymers, moisture absorption can lead to both reversible and irreversible changes. In this study, the combined effect of moisture and elevated temperature on the mechanical properties of Epon 862 and its nanocomposites were investigated. The extent of permanent damage on fracture toughness and flexural properties of epoxy, due to the aggressive degradation provided by hygrothermal ageing, was determined by drying the epoxy and their clay/epoxy nanocomposites after moisture absorption. From the investigation it was found out that, clay can help in reducing the negative effect of hygrothermal ageing. Significant permanent damage was observed for fracture toughness and modulus, while the extent of permanent damage was less significant for flexural strength. Failure mechanism of this nanocomposites were studied by using Scanning Electron Microscopy (SEM).

Construction of CHESS compact undulator magnets at Kyma

NASA Astrophysics Data System (ADS)

Temnykh, Alexander B.; Lyndaker, Aaron; Kokole, Mirko; Milharcic, Tadej; Pockar, Jure; Geometrante, Raffaella

2015-05-01

In 2014 KYMA S.r.l. has built two CHESS Compact Undulator (CCU) magnets that are at present installed and successfully operate at the Cornell Electron Storage Ring. This type of undulator was developed for upgrade of Cornell High Energy Synchrotron Source beam-lines, but it can be used elsewhere as well. CCU magnets are compact, lightweight, cost efficient and in-vacuum compatible. They are linearly polarized undulators and have a fixed gap. Magnetic field tuning is achieved by phasing (shifting) top magnetic array relative bottom. Two CCUs constructed by KYMA S.r.l. have 28.4 mm period, 6.5 mm gap, 0.93 T peak field. Magnetic structure is of PPM type, made with NdFeB (40UH grade) permanent magnet material. Transitioning from the laboratory to industrial environment for a novel design required additional evaluation, design adjusting and extensive testing. Particular attention was given to the soldering technique used for fastening of the magnetic blocks to holders. This technique had thus far never been used before for undulator magnet construction by industry. The evaluation included tests of different types of soldering paste, measurements of strength of solder and determining the deformations of the soldered magnet and holder under simulated loading forces. This paper focuses on critical features of the CCU design, results of the soldering technique testing and the data regarding permanent magnets magnetization change due to soldering. In addition it deals with optimization-assisted assembly and the performance of the assembled devices and assesses some of the results of the CCU magnets operation at CESR.

Biodegradable Orthopedic Magnesium-Calcium (MgCa) Alloys, Processing, and Corrosion Performance.

PubMed

Salahshoor, Meisam; Guo, Yuebin

2012-01-09

Magnesium-Calcium (Mg-Ca) alloy has received considerable attention as an emerging biodegradable implant material in orthopedic fixation applications. The biodegradable Mg-Ca alloys avoid stress shielding and secondary surgery inherent with permanent metallic implant materials. They also provide sufficient mechanical strength in load carrying applications as opposed to biopolymers. However, the key issue facing a biodegradable Mg-Ca implant is the fast corrosion in the human body environment. The ability to adjust degradation rate of Mg-Ca alloys is critical for the successful development of biodegradable orthopedic implants. This paper focuses on the functions and requirements of bone implants and critical issues of current implant biomaterials. Microstructures and mechanical properties of Mg-Ca alloys, and the unique properties of novel magnesium-calcium implant materials have been reviewed. Various manufacturing techniques to process Mg-Ca based alloys have been analyzed regarding their impacts on implant performance. Corrosion performance of Mg-Ca alloys processed by different manufacturing techniques was compared. In addition, the societal and economical impacts of developing biodegradable orthopedic implants have been emphasized.

Biodegradable Orthopedic Magnesium-Calcium (MgCa) Alloys, Processing, and Corrosion Performance

PubMed Central

Salahshoor, Meisam; Guo, Yuebin

2012-01-01

Magnesium-Calcium (Mg-Ca) alloy has received considerable attention as an emerging biodegradable implant material in orthopedic fixation applications. The biodegradable Mg-Ca alloys avoid stress shielding and secondary surgery inherent with permanent metallic implant materials. They also provide sufficient mechanical strength in load carrying applications as opposed to biopolymers. However, the key issue facing a biodegradable Mg-Ca implant is the fast corrosion in the human body environment. The ability to adjust degradation rate of Mg-Ca alloys is critical for the successful development of biodegradable orthopedic implants. This paper focuses on the functions and requirements of bone implants and critical issues of current implant biomaterials. Microstructures and mechanical properties of Mg-Ca alloys, and the unique properties of novel magnesium-calcium implant materials have been reviewed. Various manufacturing techniques to process Mg-Ca based alloys have been analyzed regarding their impacts on implant performance. Corrosion performance of Mg-Ca alloys processed by different manufacturing techniques was compared. In addition, the societal and economical impacts of developing biodegradable orthopedic implants have been emphasized. PMID:28817036

Numerical simulation of magnetic convection ferrofluid flow in a permanent magnet-inserted cavity

NASA Astrophysics Data System (ADS)

Ashouri, Majid; Behshad Shafii, Mohammad

2017-11-01

The magnetic convection heat transfer in an obstructed two-dimensional square cavity is investigated numerically. The walls of the cavity are heated with different constant temperatures at two sides, and isolated at two other sides. The cavity is filled with a high Prandtl number ferrofluid. The convective force is induced by a magnetic field gradient of a thermally insulated square permanent magnet located at the center of the cavity. The results are presented in the forms of streamlines, isotherms, and Nusselt number for various values of magnetic Rayleigh numbers and permanent magnet size. Two major circulations are generated in the cavity, clockwise flow in the upper half and counterclockwise in the lower half. In addition, strong circulations are observed around the edges of the permanent magnet surface. The strength of the circulations increase monotonically with the magnetic Rayleigh number. The circulations also increase with the permanent magnet size, but eventually, are suppressed for larger sizes. It is found that there is an optimum size for the permanent magnet due to the contrary effects of the increase in magnetic force and the increase in flow resistance by increasing the size. By increasing the magnetic Rayleigh number or isothermal walls temperature ratio, the heat transfer rate increases.

Genome-wide association studies of pit-and-fissure- and smooth-surface caries in permanent dentition.

PubMed

Zeng, Z; Shaffer, J R; Wang, X; Feingold, E; Weeks, D E; Lee, M; Cuenco, K T; Wendell, S K; Weyant, R J; Crout, R; McNeil, D W; Marazita, M L

2013-05-01

While genetics clearly influences dental caries risk, few caries genes have been discovered and validated. Recent studies have suggested differential genetic factors for primary dentition caries and permanent dentition caries, as well as for pit-and-fissure- (PF) and smooth- (SM) surface caries. We performed separate GWAS for caries in permanent-dentition PF surfaces (1,017 participants, adjusted for age, sex, and the presence of Streptococcus mutans) and SM surfaces (1,004 participants, adjusted for age, education group, and the presence of Streptococcus mutans) in self-reported whites (ages 14 to 56 yrs). Caries scores were derived based on visual assessment of each surface of each tooth; more than 1.2 million SNPs were either successfully genotyped or imputed and were tested for association. Two homologous genes were suggestively associated: BCOR (Xp11.4) in PF-surface caries (p value = 1.8E-7), and BCORL1 (Xq26.1) in SM-surface caries (p value = 1.0E-5). BCOR mutations cause oculofaciocardiodental syndrome, a Mendelian disease involving multiple dental anomalies. Associations of other plausible cariogenesis genes were also observed for PF-surface caries (e.g., INHBA, p value = 6.5E-6) and for SM-surface caries (e.g., CXCR1 and CXCR2, p value = 1.9E-6). This study supports the notion that genes differentially affect cariogenesis across the surfaces of the permanent dentition, and nominates several novel genes for investigation.

Genome-wide Association Studies of Pit-and-Fissure- and Smooth-surface Caries in Permanent Dentition

PubMed Central

Zeng, Z.; Shaffer, J.R.; Wang, X.; Feingold, E.; Weeks, D.E.; Lee, M.; Cuenco, K.T.; Wendell, S.K.; Weyant, R.J.; Crout, R.; McNeil, D.W.; Marazita, M.L.

2013-01-01

While genetics clearly influences dental caries risk, few caries genes have been discovered and validated. Recent studies have suggested differential genetic factors for primary dentition caries and permanent dentition caries, as well as for pit-and-fissure- (PF) and smooth- (SM) surface caries. We performed separate GWAS for caries in permanent-dentition PF surfaces (1,017 participants, adjusted for age, sex, and the presence of Streptococcus mutans) and SM surfaces (1,004 participants, adjusted for age, education group, and the presence of Streptococcus mutans) in self-reported whites (ages 14 to 56 yrs). Caries scores were derived based on visual assessment of each surface of each tooth; more than 1.2 million SNPs were either successfully genotyped or imputed and were tested for association. Two homologous genes were suggestively associated: BCOR (Xp11.4) in PF-surface caries (p value = 1.8E-7), and BCORL1 (Xq26.1) in SM-surface caries (p value = 1.0E-5). BCOR mutations cause oculofaciocardiodental syndrome, a Mendelian disease involving multiple dental anomalies. Associations of other plausible cariogenesis genes were also observed for PF-surface caries (e.g., INHBA, p value = 6.5E-6) and for SM-surface caries (e.g., CXCR1 and CXCR2, p value = 1.9E-6). This study supports the notion that genes differentially affect cariogenesis across the surfaces of the permanent dentition, and nominates several novel genes for investigation. PMID:23470693

HEAVY MANUAL WORK THROUGHOUT THE WORKING LIFETIME AND MUSCLE STRENGTH AMONG MEN AT RETIREMENT AGE

PubMed Central

Walker-Bone, K; D’Angelo, S; Syddall, HE; Palmer, KT; Cooper, C; Coggon, D; Sayer, AA

2016-01-01

Introduction Reductions in heavy manual work as a consequence of mechanisation might impact adversely on muscle strength at older ages. We investigated the association between grip strength at retirement age and lifetime occupational exposure to physically demanding activities. Grip strength is an important predictor of long-term health and physical function in older people. Methods Grip strength (maximum of three readings in each hand) was measured in men from the Hertfordshire Cohort Study at a single examination when their mean age was 65.8 (SD 2.9) years. Associations with lifetime occupational exposure (ascertained by questionnaire) to three activities (standing/walking ≥4 hours/day; lifting ≥25 kg; and energetic work sufficient to induce sweating) were assessed by multivariable linear regression with adjustment for various potential confounders. Results Complete data were available from 1,418 men who had worked for at least 20 years. After adjustment for age, height and weight, those with longer exposures to walking/standing and heavy lifting had lower grip strength, but the relationship disappeared after further adjustment for confounders. Working at physical intensity sufficient to induce sweating was not significantly associated with grip strength. Conclusions We found no evidence that physically demanding occupational activities increase hand grip strength at normal retirement age. Any advantages of regular physical occupational activity may have been obscured by unmeasured socio-economic confounders. PMID:26896253

New Materials Developments for Military High Power Electronics and Capacitors

DTIC Science & Technology

2009-04-27

parameters, permittivity and breakdown field strength, and can be given by equation 1. (1) Where U - energy density (J/ cm3), ε - relative material... permittivity εo - permittivity of free space (8.85418782 × 10-12 m-3 kg-1 s4 A2) Emax (V/µm) - maximum field strength before material breakdown... Permittivity can be described as the ability of the material to polar- ize in response to an electric field through separation of ions, twist- ing permanent

Basic investigation of the laminated alginate impression technique: Setting time, permanent deformation, elastic deformation, consistency, and tensile bond strength tests.

PubMed

Kitamura, Aya; Kawai, Yasuhiko

2015-01-01

Laminated alginate impression for edentulous is simple and time efficient compared to border molding technique. The purpose of this study was to examine clinical applicability of the laminated alginate impression, by measuring the effects of different Water/Powder (W/P) and mixing methods, and different bonding methods in the secondary impression of alginate impression. Three W/P: manufacturer-designated mixing water amount (standard), 1.5-fold (1.5×) and 1.75-fold (1.75×) water amount were mixed by manual and automatic mixing methods. Initial and complete setting time, permanent and elastic deformation, and consistency of the secondary impression were investigated (n=10). Additionally, tensile bond strength between the primary and secondary impression were measured in the following surface treatment; air blow only (A), surface baking (B), and alginate impression material bonding agent (ALGI-BOND: AB) (n=12). Initial setting times significantly shortened with automatic mixing for all W/P (p<0.05). The permanent deformation decreased and elastic deformation increased as high W/P, regardless of the mixing method. Elastic deformation significantly reduced in 1.5× and 1.75× with automatic mixing (p<0.05). All of these properties resulted within JIS standards. For all W/P, AB showed a significantly high bonding strength as compared to A and B (p<0.01). The increase of mixing water, 1.5× and 1.75×, resulted within JIS standards in setting time, suggesting its applicability in clinical setting. The use of automatic mixing device decreased elastic strain and shortening of the curing time. For the secondary impression application of adhesives on the primary impression gives secure adhesion. Copyright © 2014 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

Assessment of wrought ASTM F1058 cobalt alloy properties for permanent surgical implants.

PubMed

Clerc, C O; Jedwab, M R; Mayer, D W; Thompson, P J; Stinson, J S

1997-01-01

The behavior of the ASTM F1058 wrought cobalt-chromium-nickel-molybdenum-iron alloy (commonly referred to as Elgiloy or Phynox) is evaluated in terms of mechanical properties, magnetic resonance imaging, corrosion resistance, and biocompatibility. The data found in the literature, the experimental corrosion and biocompatibility results presented in this article, and its long track record as an implant material demonstrate that the cobalt superalloy is an appropriate material for permanent surgical implants that require high yield strength and fatigue resistance combined with high elastic modulus, and that it can be safely imaged with magnetic resonance.

Strong permanent magnet-assisted electromagnetic undulator

DOEpatents

Halbach, Klaus

1988-01-01

This invention discloses an improved undulator comprising a plurality of electromagnet poles located along opposite sides of a particle beam axis with alternate north and south poles on each side of the beam to cause the beam to wiggle or undulate as it travels generally along the beam axis and permanent magnets spaced adjacent the electromagnetic poles on each side of the axis of said particle beam in an orientation sufficient to reduce the saturation of the electromagnet poles whereby the field strength of the electromagnet poles can be increased beyond the normal saturation levels of the electromagnetic poles.

A strong permanent magnet-assisted electromagnetic undulator

DOEpatents

Halbach, K.

1987-01-30

This invention discloses an improved undulator comprising a plurality of electromagnet poles located along opposite sides of a particle beam axis with alternate north and south poles on each side of the beam to cause the beam to wiggle or undulate as it travels generally along the beam axis and permanent magnets spaced adjacent the electromagnetic poles on each side of the axis of said particle beam in an orientation sufficient to reduce the saturation of the electromagnet poles whereby the field strength of the electromagnet poles can be increased beyond the normal saturation levels of the electromagnetic poles. 4 figs.

Electromagnetic induction pump for pumping liquid metals and other conductive liquids

DOEpatents

Smither, R.K.

1993-05-11

An electromagnetic induction pump is described in which an electrically conductive liquid is made to flow by means of a force created by interaction of a permanent magnetic field and a DC current. The pump achieves high efficiency through combination of: powerful permanent magnet materials which provide a high strength field that is uniform and constant; steel tubing formed into a coil which is constructed to carry conducting liquids with minimal electrical resistance and heat; and application of a voltage to induce a DC current which continuously produces a force in the direction of the desired flow.

Electromagnetic induction pump for pumping liquid metals and other conductive liquids

DOEpatents

Smither, Robert K.

1993-01-01

An electromagnetic induction pump in which an electrically conductive liquid is made to flow by means of a force created by interaction of a permanent magnetic field and a DC current. The pump achieves high efficiency through combination of: powerful permanent magnet materials which provide a high strength field that is uniform and constant; steel tubing formed into a coil which is constructed to carry conducting liquids with minimal electrical resistance and heat; and application of a voltage to induce a DC current which continuously produces a force in the direction of the desired flow.

Mechanical evaluation of a ruptured Swedish adjustable gastric band.

PubMed

Reijnen, Michael M P J; Naus, J H; Janssen, Ignace M C

2004-02-01

Leakage of a laparoscopically placed Swedish adjustable gastric band (SAGB) was observed 2 1/2 years after placement. The band was evaluated for mechanical inaccuracies by a laboratory. The ruptured SAGB was investigated microscopically and wall thicknesses were measured. An unused SAGB was tested, both empty and filled, for mechanical deformity after exposure to saline solution. A permanent transformation of the silicone rubber was found, caused by bowing of the device. 2 tears were present at the end of a kink. The mean wall thickness was within acceptable limits. Exposure of the gastric band to saline solution did not cause any sign of permanent deformity of the silicone rubber. The rupture of the gastric band did not seem to be caused by a production error. Long-term deformity, in combination with a continuous dynamic load, may increase the risk of tearing. Long-term follow up is recommended for patients treated with this device.

Muscle strength and areal bone mineral density at the hip in women: a cross-sectional study.

PubMed

Pasco, Julie A; Holloway, Kara L; Brennan-Olsen, Sharon L; Moloney, David J; Kotowicz, Mark A

2015-05-24

Muscle strengthening exercises are promoted for building and maintaining a healthy skeleton. We aimed to investigate the relationship between muscle strength and areal bone mineral density (BMD) at the hip in women aged 26-97 years. This cross-sectional study utilises data from 863 women assessed for the Geelong Osteoporosis Study. Measures of hip flexor and abductor strength were made using a hand-held dynamometer (Nicholas Manual Muscle Tester). The maximal measure from three trials on each leg was used for analyses. BMD was measured at the hip using dual energy x-ray absorptiometry (DXA; Lunar DPX-L). Total lean mass, body fat mass and appendicular lean mass were determined from whole body DXA scans. Linear regression techniques were used with muscle strength as the independent variable and BMD as the dependent variable. Models were adjusted for age and indices of body composition. Measures of age-adjusted hip flexor strength and hip abductor strength were positively associated with total hip BMD. For each standard deviation (SD) increase in hip flexor strength, the increase in mean total hip BMD (SD) was 10.4 % (p = 0.009). A similar pattern was observed for hip abductor strength, with an increase in mean total hip BMD of 22.8 % (p = 0.025). All associations between hip muscle strength and total hip BMD were independent of height, but were nullified after adjusting for appendicular lean mass or total lean mass. There was a positive association observed between muscle strength and BMD at the hip. However, this association was explained by measures of lean mass.

Low Cost Al-Si Casting Alloy As In-Situ Composite for High Temperature Applications

NASA Technical Reports Server (NTRS)

Lee, Jonathan A.

2000-01-01

A new aluminum-silicon (Al-Si) alloy has been successfully developed at NASA- Marshall Space Flight Center (MSFC) that has significant improvement in tensile and fatigue strength at elevated temperatures (500 F-700 F). The alloy offers a number of benefits such as light weight, high hardness, low thermal expansion and high surface wear resistance. In hypereutectic form, this alloy is considered as an in-situ Al-Si composite with tensile strength of about 90% higher than the auto industry 390 alloy at 600 F. This composite is very economically produced by using either conventional permanent steel molds or die casting. The projected material cost is less than $0.90 per pound, and automotive components such as pistons can be cast for high production rate using conventional casting techniques with a low and fully accounted cost. Key Words: Metal matrix composites, In-situ composite, aluminum-silicon alloy, hypereutectic alloy, permanent mold casting, die casting.

Impulse Magnetization of Nd-Fe-B Sintered Magnets for Sensors

PubMed Central

Przybylski, Marek; Kapelski, Dariusz; Ślusarek, Barbara; Wiak, Sławomir

2016-01-01

Magnetization of large Nd-Fe-B sintered permanent magnets is still challenging. This type of permanent magnet is electrically conductive, so impulse magnetization causes a flow of eddy currents which prevent magnetization of the whole volume of the magnet. The paper deals with the impulse magnetization of sintered Nd-Fe-B permanent magnets and shows a method for the determination of suitable parameters for the supply system. The necessary magnetic field strength for magnetization of the magnet to saturation was determined. The optimal magnetizing fixture supply voltage for magnetization to saturation was determined from simulations in PSpice software, finite element analyses in Maxwell 15 and measurements. Measurements of magnetic induction on the surface of the Nd-Fe-B magnet are also presented to ensure that a magnet with 70 mm diameter and 20 mm in height is fully saturated. PMID:27110783

Characterizing permanent magnet blocks with Helmholtz coils

NASA Astrophysics Data System (ADS)

Carnegie, D. W.; Timpf, J.

1992-08-01

Most of the insertion devices to be installed at the Advanced Photon Source will utilize permanent magnets in their magnetic structures. The quality of the spectral output is sensitive to the errors in the field of the device which are related to variations in the magnetic properties of the individual blocks. The Advanced Photon Source will have a measurement facility to map the field in the completed insertion devices and equipment to test and modify the magnetic strength of the individual magnet blocks. One component of the facility, the Helmholtz coil permanent magnet block measurement system, has been assembled and tested. This system measures the total magnetic moment vector of a block with a precision better than 0.01% and a directional resolution of about 0.05°. The design and performance of the system will be presented.

Impulse Magnetization of Nd-Fe-B Sintered Magnets for Sensors.

PubMed

Przybylski, Marek; Kapelski, Dariusz; Ślusarek, Barbara; Wiak, Sławomir

2016-04-21

Magnetization of large Nd-Fe-B sintered permanent magnets is still challenging. This type of permanent magnet is electrically conductive, so impulse magnetization causes a flow of eddy currents which prevent magnetization of the whole volume of the magnet. The paper deals with the impulse magnetization of sintered Nd-Fe-B permanent magnets and shows a method for the determination of suitable parameters for the supply system. The necessary magnetic field strength for magnetization of the magnet to saturation was determined. The optimal magnetizing fixture supply voltage for magnetization to saturation was determined from simulations in PSpice software, finite element analyses in Maxwell 15 and measurements. Measurements of magnetic induction on the surface of the Nd-Fe-B magnet are also presented to ensure that a magnet with 70 mm diameter and 20 mm in height is fully saturated.

‘I–We’ boundary fluctuations in couple adjustment to rectal cancer and life with a permanent colostomy

PubMed Central

McCarthy, Molly; Fergus, Karen; Miller, Debbie

2016-01-01

This study investigates couples’ adjustment to rectal cancer and a colostomy using the ‘Classification System of Couple Adjustment to Cancer’, a framework delineating fluctuations in couples’ sense of ‘I’ and ‘We’ in response to cancer. Nine couples affected by rectal cancer and adjusting to life with a colostomy were interviewed. A theoretical thematic analysis of the transcripts was conducted; nearly all ‘I–We’ shifts of the Classification System of Couple Adjustment to Cancer were observed – often in unique ways in response to rectal cancer–specific challenges – and one new shift was described. The results provide a novel and experientially grounded means of conceptualizing complex dyadic coping processes. PMID:28070388

8 CFR 245a.3 - Application for adjustment from temporary to permanent resident status.

Code of Federal Regulations, 2014 CFR

2014-01-01

... grams or less of marijuana; (iv) Paragraphs (27) (prejudicial to the public interest), (28) (communists... Processing Facility may issue a new decision that will grant the benefit which has been requested. The...

8 CFR 245a.3 - Application for adjustment from temporary to permanent resident status.

Code of Federal Regulations, 2013 CFR

2013-01-01

... grams or less of marijuana; (iv) Paragraphs (27) (prejudicial to the public interest), (28) (communists... Processing Facility may issue a new decision that will grant the benefit which has been requested. The...

8 CFR 245a.3 - Application for adjustment from temporary to permanent resident status.

Code of Federal Regulations, 2012 CFR

2012-01-01

... grams or less of marijuana; (iv) Paragraphs (27) (prejudicial to the public interest), (28) (communists... Processing Facility may issue a new decision that will grant the benefit which has been requested. The...

Bond strength with various etching times on young permanent teeth

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, W.N.; Lu, T.C.

1991-07-01

Tensile bond strengths of an orthodontic resin cement were compared for 15-, 30-, 60-, 90-, or 120-second etching times, with a 37% phosphoric acid solution on the enamel surfaces of young permanent teeth. Fifty extracted premolars from 9- to 16-year-old children were used for testing. An orthodontic composite resin was used to bond the bracket directly onto the buccal surface of the enamel. The tensile bond strengths were tested with an Instron machine. Bond failure interfaces between bracket bases and teeth surfaces were examined with a scanning electron microscope and calculated with mapping of energy-dispersive x-ray spectrometry. The results ofmore » tensile bond strength for 15-, 30-, 60-, or 90-second etching times were not statistically different. For the 120-second etching time, the decrease was significant. Of the bond failures, 43%-49% occurred between bracket and resin interface, 12% to 24% within the resin itself, 32%-40% between resin and tooth interface, and 0% to 4% contained enamel fragments. There was no statistical difference in percentage of bond failure interface distribution between bracket base and resin, resin and enamel, or the enamel detachment. Cohesive failure within the resin itself at the 120-second etching time was less than at other etching times, with a statistical significance. To achieve good retention, to decrease enamel loss, and to reduce moisture contamination in the clinic, as well as to save chairside time, a 15-second etching time is suggested for teenage orthodontic patients.« less

Incidence of permanent hypocalcaemia after total thyroidectomy with or without central neck dissection for thyroid carcinoma: a nationwide claim study.

PubMed

Seo, Gi Hyeon; Chai, Young Jun; Choi, Hyung Jin; Lee, Kyu Eun

2016-09-01

Permanent hypocalcaemia is the most common and serious complication after total thyroidectomy (TT). This study examined the impact of central neck dissection (CND) and institutional volume on rates of permanent hypocalcaemia by analysing data held in the nationwide claim database of South Korea. Data from patients who underwent TT due to thyroid carcinoma from 2007-2013 were obtained from the Health Insurance Review and Assessment Service database. Of these, patients prescribed more than 1000 mg of elemental calcium for more than 288 days during the first 360 days postsurgery were defined as having permanent hypocalcaemia. In total, 192 333 patients (32 988 male and 159 345 female) were eligible for analysis. Of these, 52 707 (27·4%) underwent TT alone and 139 626 (72·6%) underwent TT plus CND. The incidence of permanent hypocalcaemia was greater in the TT plus CND group than in the TT alone group (5·4% vs 4·6%, P < 0·001). The age- and sex-adjusted risk for permanent hypocalcaemia in the TT plus CND group was 1·20 (P < 0·001). CND did not raise the rates of permanent hypocalcaemia in institutes with a low volume of annual cases (<200), whereas permanent hypocalcaemia was more common in the TT plus CND group than in the TT alone group (3·5% vs 2·9%, P = 0·002) in institutes with a large volume of annual cases (≥800). TT plus CND was associated with a greater risk of permanent hypocalcaemia than TT alone. Surgeons should consider the risk of permanent hypocalcaemia when deciding whether to perform CND. © 2016 John Wiley & Sons Ltd.

Electrets and Electrostatic Measurement

ERIC Educational Resources Information Center

Varney, R. N.; Hahn, H. T.

1975-01-01

Electrets, the electrical counterparts of magnets, are polarized dielectrics that are permanent on a scale of months. Describes procedures for making electrets out of plastic sheets like Mylar, for testing them and measuring their pole strengths, and for establishing necessary and sufficient demonstrations that they are not simply surface charged.…

24 CFR 51.205 - Mitigating measures.

Code of Federal Regulations, 2012 CFR

2012-04-01

...) An existing permanent fire resistant structure of adequate size and strength will shield the proposed..., or in between the potential hazard and the proposed project. (d) The structure and outdoor areas used... potential hazard (e.g., the project is of masonry and steel or reinforced concrete and steel construction). ...

24 CFR 51.205 - Mitigating measures.

Code of Federal Regulations, 2014 CFR

2014-04-01

...) An existing permanent fire resistant structure of adequate size and strength will shield the proposed..., or in between the potential hazard and the proposed project. (d) The structure and outdoor areas used... potential hazard (e.g., the project is of masonry and steel or reinforced concrete and steel construction). ...

24 CFR 51.205 - Mitigating measures.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) An existing permanent fire resistant structure of adequate size and strength will shield the proposed..., or in between the potential hazard and the proposed project. (d) The structure and outdoor areas used... potential hazard (e.g., the project is of masonry and steel or reinforced concrete and steel construction). ...

24 CFR 51.205 - Mitigating measures.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) An existing permanent fire resistant structure of adequate size and strength will shield the proposed..., or in between the potential hazard and the proposed project. (d) The structure and outdoor areas used... potential hazard (e.g., the project is of masonry and steel or reinforced concrete and steel construction). ...

24 CFR 51.205 - Mitigating measures.

Code of Federal Regulations, 2013 CFR

2013-04-01

...) An existing permanent fire resistant structure of adequate size and strength will shield the proposed..., or in between the potential hazard and the proposed project. (d) The structure and outdoor areas used... potential hazard (e.g., the project is of masonry and steel or reinforced concrete and steel construction). ...

Outcome in adolescence of brachial plexus birth palsy

PubMed Central

Hulleberg, Gunn; Elvrum, Ann-Kristin G; Brandal, Merethe; Vik, Torstein

2014-01-01

Background and purpose — The frequency and severity of a permanent lesion after brachial plexus birth palsy (BPBP) and its impact on activities of daily living are not well documented. We therefore investigated the outcome of BPBP in adolescents, regarding arm function and consequences for activity and participation. Participants and methods — Of 30,574 babies born at St. Olavs University Hospital in 1991–2000, 91 had BPBP (prevalence 3 per 1,000), and 69 of these individuals were examined at a median age of 14 (10–20) years. The examination included the modified Mallet classification, range of motion, shoulder rotation and grip strength, Assisting Hand Assessment, and Canadian Occupational Performance Measure. Of the 22 subjects who were not examined, 3 could not be traced and 19 reported having no problems in the affected arm. Results — At follow-up, 17 adolescents had a permanent lesion (i.e. individual Mallet subscore below 4) with a median Mallet total score of 15 (9–19), while 52 had good or normal shoulder function (median Mallet total score 25 (23–25)). All participants with a permanent lesion had reduced active shoulder rotation (≤ 15°), 16 had elbow extension deficit, and 10 had subnormal grip strength. External rotation was considerably weaker in the affected shoulder. In addition, they had ineffective use of the affected arm in bimanual activities. Even so, all except 1 were independent in activities of daily living, although 15 experienced minor difficulties. Interpretation — Every fourth to fifth child with BPBP had a permanent lesion as an adolescent. External rotation was the most impaired movement. Despite ineffective use of the affected arm in bimanual activities, all of the participants except one were independent in activities of daily living. PMID:25238434

Outcome in adolescence of brachial plexus birth palsy. 69 individuals re-examined after 10–20 years.

PubMed

Hulleberg, Gunn; Elvrum, Ann-Kristin G; Brandal, Merethe; Vik, Torstein

2014-12-01

The frequency and severity of a permanent lesion after brachial plexus birth palsy (BPBP) and its impact on activities of daily living are not well documented. We therefore investigated the outcome of BPBP in adolescents, regarding arm function and consequences for activity and participation. Of 30,574 babies born at St. Olavs University Hospital in 1991-2000, 91 had BPBP (prevalence 3 per 1,000), and 69 of these individuals were examined at a median age of 14 (10-20) years. The examination included the modified Mallet classification, range of motion, shoulder rotation and grip strength, Assisting Hand Assessment, and Canadian Occupational Performance Measure. Of the 22 subjects who were not examined, 3 could not be traced and 19 reported having no problems in the affected arm. At follow-up, 17 adolescents had a permanent lesion (i.e. individual Mallet subscore below 4) with a median Mallet total score of 15 (9-19), while 52 had good or normal shoulder function (median Mallet total score 25 (23-25)). All participants with a permanent lesion had reduced active shoulder rotation (≤15°), 16 had elbow extension deficit, and 10 had subnormal grip strength. External rotation was considerably weaker in the affected shoulder. In addition, they had ineffective use of the affected arm in bimanual activities. Even so, all except 1 were independent in activities of daily living, although 15 experienced minor difficulties. Every fourth to fifth child with BPBP had a permanent lesion as an adolescent. External rotation was the most impaired movement. Despite ineffective use of the affected arm in bimanual activities, all of the participants except one were independent in activities of daily living.

Attentional adjustment to conflict strength: evidence from the effects of manipulating flanker-target SOA on response times and prestimulus pupil size.

PubMed

Wendt, Mike; Kiesel, Andrea; Geringswald, Franziska; Purmann, Sascha; Fischer, Rico

2014-01-01

Current models of cognitive control assume gradual adjustment of processing selectivity to the strength of conflict evoked by distractor stimuli. Using a flanker task, we varied conflict strength by manipulating target and distractor onset. Replicating previous findings, flanker interference effects were larger on trials associated with advance presentation of the flankers compared to simultaneous presentation. Controlling for stimulus and response sequence effects by excluding trials with feature repetitions from stimulus administration (Experiment 1) or from the statistical analyses (Experiment 2), we found a reduction of the flanker interference effect after high-conflict predecessor trials (i.e., trials associated with advance presentation of the flankers) but not after low-conflict predecessor trials (i.e., trials associated with simultaneous presentation of target and flankers). This result supports the assumption of conflict-strength-dependent adjustment of visual attention. The selective adaptation effect after high-conflict trials was associated with an increase in prestimulus pupil diameter, possibly reflecting increased cognitive effort of focusing attention.

Inclusiveness, Power Sharing and Critical Enquiry: Intercultural Programme Model for New Settlers

ERIC Educational Resources Information Center

Hayward, Maria; U-Mackey, Alice

2013-01-01

Migrants and refugees settling permanently in a new country face significant social, linguistic and cultural challenges. However, they also bring intercultural strengths and skills which, if acknowledged and enhanced, can support successful settlement and inclusion in a pluralistic society. This paper describes the underpinning rationale and…

Fluorescent lamp with static magnetic field generating means

DOEpatents

Moskowitz, Philip E.; Maya, Jakob

1987-01-01

A fluorescent lamp wherein magnetic field generating means (e.g., permanent magnets) are utilized to generate a static magnetic field across the respective electrode structures of the lamp such that maximum field strength is located at the electrode's filament. An increase in efficacy during operation has been observed.

Fluorescent lamp with static magnetic field generating means

DOEpatents

Moskowitz, P.E.; Maya, J.

1987-09-08

A fluorescent lamp wherein magnetic field generating means (e.g., permanent magnets) are utilized to generate a static magnetic field across the respective electrode structures of the lamp such that maximum field strength is located at the electrode's filament. An increase in efficacy during operation has been observed. 2 figs.

Magnetofluidic concentration and separation of non-magnetic particles using two magnet arrays

PubMed Central

Hejazian, Majid

2016-01-01

The present paper reports the use of diluted ferrofluid and two arrays of permanent magnets for the size-selective concentration of non-magnetic particles. The micro magnetofluidic device consists of a straight channels sandwiched between two arrays of permanent magnets. The permanent magnets create multiple capture zones with minimum magnetic field strength along the channel. The complex interaction between magnetic forces and hydrodynamic force allows the device to operate in different regimes suitable for concentration of non-magnetic particles with small difference in size. Our experimental results show that non-magnetic particles with diameters of 3.1 μm and 4.8 μm can be discriminated and separated with this method. The results from this study could be used as a guide for the design of size-sensitive separation devices for particle and cell based on negative magnetophoresis. PMID:27478527

Impacts of changing hydrology on permanent gully growth: experimental results

NASA Astrophysics Data System (ADS)

Day, Stephanie S.; Gran, Karen B.; Paola, Chris

2018-06-01

Permanent gullies grow through head cut propagation in response to overland flow coupled with incision and widening in the channel bottom leading to hillslope failures. Altered hydrology can impact the rate at which permanent gullies grow by changing head cut propagation, channel incision, and channel widening rates. Using a set of small physical experiments, we tested how changing overland flow rates and flow volumes alter the total volume of erosion and resulting gully morphology. Permanent gullies were modeled as both detachment-limited and transport-limited systems, using two different substrates with varying cohesion. In both cases, the erosion rate varied linearly with water discharge, such that the volume of sediment eroded was a function not of flow rate, but of total water volume. This implies that efforts to reduce peak flow rates alone without addressing flow volumes entering gully systems may not reduce erosion. The documented response in these experiments is not typical when compared to larger preexisting channels where higher flow rates result in greater erosion through nonlinear relationships between water discharge and sediment discharge. Permanent gullies do not respond like preexisting channels because channel slope remains a free parameter and can adjust relatively quickly in response to changing flows.

Association between developmental enamel defects in the primary and permanent dentitions.

PubMed

Casanova-Rosado, A J; Medina-Solís, C E; Casanova-Rosado, J F; Vallejos-Sánchez, A A; Martinez-Mier, E A; Loyola-Rodríguez, J P; Islas-Márquez, A J; Maupomé, G

2011-09-01

To determine if the presence of developmental enamel defects (DED) in the primary dentition is a risk indicator for the presence of DED in the permanent dentition in children with mixed dentition, as well as others factors. A cross-sectional study was undertaken in 1296 school children ages six to 72 years. The DED [FDI; 1982] in both dentitions were identified by means of an oral exam scoring enamel opacities [classified as demarcated or diffused], and enamel hypoplasia. Sociodemographic and socioeconomic variables were collected through a questionnaire. Socioeconomic status (SES) was determined based on the occupation and maximum level of education of parents. Statistical analysis included logistic regression. Mean age of participants was 8.40 +/- 1.68; 51.6% were boys. DED prevalence was 7.5% in the permanent dentition and 10.0% in the primary dentition. The logistic regression model, adjusting for sociodemographic and socioeconomic variables, showed that for each primary tooth with DED, the odds of observing DED in the permanent dentition increased 7.38 times [95% CI = 1.17-1.64; p < 0.001]. An association between DED presence in both permanent and primary dentitions was observed. Further studies are necessary to fully characterise such relationship.

Permanent Magnet Ecr Plasma Source With Magnetic Field Optimization

DOEpatents

Doughty, Frank C.; Spencer, John E.

2000-12-19

In a plasma-producing device, an optimized magnet field for electron cyclotron resonance plasma generation is provided by a shaped pole piece. The shaped pole piece adjusts spacing between the magnet and the resonance zone, creates a convex or concave resonance zone, and decreases stray fields between the resonance zone and the workpiece. For a cylindrical permanent magnet, the pole piece includes a disk adjacent the magnet together with an annular cylindrical sidewall structure axially aligned with the magnet and extending from the base around the permanent magnet. The pole piece directs magnetic field lines into the resonance zone, moving the resonance zone further from the face of the magnet. Additional permanent magnets or magnet arrays may be utilized to control field contours on a local scale. Rather than a permeable material, the sidewall structure may be composed of an annular cylindrical magnetic material having a polarity opposite that of the permanent magnet, creating convex regions in the resonance zone. An annular disk-shaped recurve section at the end of the sidewall structure forms magnetic mirrors keeping the plasma off the pole piece. A recurve section composed of magnetic material having a radial polarity forms convex regions and/or magnetic mirrors within the resonance zone.

Sitting and standing postures are corrected by adjustable furniture with lowered muscle tension in high-school students.

PubMed

Koskelo, R; Vuorikari, K; Hänninen, O

2007-10-01

This study compared the effect of 24 months of adjustable school desks and chairs usage (the intervention) and traditional non-adjustable usage (the control condition) on sitting and standing postures, muscle strength, classroom muscle tension, pain and learning in 15 (8 female and 7 male) high-school students and 15 anthropometrically and gender matched control students from neighbouring schools. It was assessed whether any responses took place after growth cessation. In comparison with controls, the intervention group of students' sitting postures standing kyphosis, scoliosis and lordosis became significantly better, both before and after growth cessation. Trunk muscle strength increased in the intervention students whose muscle tension during classes fell significantly in the trapezius and lumbar muscles, whereas in control students' lumbar tension increased. Headache and low-back pain correlated with neck-shoulder pain and trapezius muscle tension. Intervention students reported that they experienced benefits from the adjustable tables and chairs. They also received significantly better overall marks than the controls at the end of high school. It is concluded that the adjustable school desks and chairs promoted better sitting and standing postures, increased muscle strength, alleviated pain and appeared to be associated with better overall academic marks.

25 CFR 103.34 - What if the lender and borrower decide to change the terms of the loan?

Code of Federal Regulations, 2011 CFR

2011-04-01

... written BIA approval before modifying a loan guaranteed or insured under the Program, if the change will... accrued loan interest it otherwise would have difficulty paying. (2) Permanently adjust the loan repayment...

25 CFR 103.34 - What if the lender and borrower decide to change the terms of the loan?

Code of Federal Regulations, 2014 CFR

2014-04-01

... written BIA approval before modifying a loan guaranteed or insured under the Program, if the change will... accrued loan interest it otherwise would have difficulty paying. (2) Permanently adjust the loan repayment...

25 CFR 103.34 - What if the lender and borrower decide to change the terms of the loan?

Code of Federal Regulations, 2012 CFR

2012-04-01

... written BIA approval before modifying a loan guaranteed or insured under the Program, if the change will... accrued loan interest it otherwise would have difficulty paying. (2) Permanently adjust the loan repayment...

25 CFR 103.34 - What if the lender and borrower decide to change the terms of the loan?

Code of Federal Regulations, 2010 CFR

2010-04-01

... written BIA approval before modifying a loan guaranteed or insured under the Program, if the change will... accrued loan interest it otherwise would have difficulty paying. (2) Permanently adjust the loan repayment...

25 CFR 103.34 - What if the lender and borrower decide to change the terms of the loan?

Code of Federal Regulations, 2013 CFR

2013-04-01

... written BIA approval before modifying a loan guaranteed or insured under the Program, if the change will... accrued loan interest it otherwise would have difficulty paying. (2) Permanently adjust the loan repayment...

Job stress and mental health of permanent and fixed-term workers measured by effort-reward imbalance model, depressive complaints, and clinic utilization.

PubMed

Inoue, Mariko; Tsurugano, Shinobu; Yano, Eiji

2011-01-01

The number of workers with precarious employment has increased globally; however, few studies have used validated measures to investigate the relationship of job status to stress and mental health. Thus, we conducted a study to compare differential job stress experienced by permanent and fixed-term workers using an effort-reward imbalance (ERI) model questionnaire, and by evaluating depressive complaints and clinic utilization. Subjects were permanent or fixed-term male workers at a Japanese research institute (n=756). Baseline data on job stress and depressive complaints were collected in 2007. We followed up with the same population over a 1-year period to assess their utilization of the company clinic for mental health concerns. The ERI ratio was higher among permanent workers than among fixed-term workers. More permanent workers presented with more than two depressive complaints, which is the standard used for the diagnosis of depression. ERI scores indicated that the effort component of permanent work was associated with distress, whereas distress in fixed-term work was related to job promotion and job insecurity. Moreover, over the one-year follow-up period, fixed-term workers visited the on-site clinic for mental concerns 4.04 times more often than permanent workers even after adjusting for age, lifestyle, ERI, and depressive complaints. These contrasting findings reflect the differential workloads and working conditions encountered by permanent and fixed-term workers. The occupational setting where employment status was intermingled, may have contributed to the high numbers of mental health-related issues experienced by workers with different employment status.

Relationship between lung function and grip strength in older hospitalized patients: a pilot study

PubMed Central

Holmes, Sarah J; Allen, Stephen C; Roberts, Helen C

2017-01-01

Objective Older people with reduced respiratory muscle strength may be misclassified as having COPD on the basis of spirometric results. We aimed to evaluate the relationship between lung function and grip strength in older hospitalized patients without known airways disease. Methods Patients in acute medical wards were recruited who were aged ≥70 years; no history, symptoms, or signs of respiratory disease; Mini Mental State Examination ≥24; willing and able to consent to participate; and able to perform hand grip and forced spirometry. Data including lung function (forced expiratory volume in 1 second [FEV1], forced vital capacity [FVC], FEV1/FVC, peak expiratory flow rate [PEFR], and slow vital capacity [SVC]), grip strength, age, weight, and height were recorded. Data were analyzed using descriptive statistics and linear regression unadjusted and adjusted (for age, height, and weight). Results A total of 50 patients (20 men) were recruited. Stronger grip strength in men was significantly associated with greater FEV1, but this was attenuated by adjustment for age, height, and weight. Significant positive associations were found in women between grip strength and both PEFR and SVC, both of which remained robust to adjustment. Conclusion The association between grip strength and PEFR and SVC may reflect stronger patients generating higher intrathoracic pressure at the start of spirometry and pushing harder against thoracic cage recoil at end-expiration. Conversely, patients with weaker grip strength had lower PEFR and SVC. These patients may be misclassified as having COPD on the basis of spirometric results. PMID:28458532

Tunable system for production of mirror and cusp configurations using chassis of permanent magnets

NASA Astrophysics Data System (ADS)

Hyde, Alexander; Bushmelov, Maxim; Batishchev, Oleg

2018-03-01

Compact arrays of permanent magnets have shown promise as replacements for electromagnets in applications requiring magnetic cusps and mirrors. An adjustable system capable of suspending and translating a pair of light, nonmagnetic chassis carrying such sources of magnetic field has been designed and constructed. Using this device to align two cylindrical chassis, strong solenoid-like domains of field, as well as classic biconic cusp and magnetic mirror topologies, are generated. Employing a pair of ring-shaped chassis instead, the superposition of their naturally-emitted cusps is demonstrated to produce sextupolar and octupolar magnetic fields.

Investigation of Anisotropic Bonded Magnets in Permanent Magnet Machine Applications

NASA Astrophysics Data System (ADS)

Khazdozian, H. A.; McCall, S. K.; Kramer, M. J.; Paranthaman, M. P.; Nlebedim, I. C.

Rare earth elements (REE) provide the high energy product necessary for permanent magnets, such as sintered Nd2Fe14B, in many applications like wind energy generators. However, REEs are considered critical materials due to risk in their supply. To reduce the use of critical materials in permanent magnet machines, the performance of anisotropic bonded NdFeB magnets, aligned under varying magnetic field strength, was simulated using 3D finite element analysis in a 3MW direct-drive permanent magnet generator (DDPMG), with sintered N42 magnets used as a baseline for comparison. For direct substitution of the anisotropic bonded magnets, approximately 85% of the efficiency of the baseline model was achieved, irrespective of the alignment field. The torque and power generation of the DDPMG was not found to vary significantly with increase in the alignment field. Finally, design changes were studied to allow for the achievement of rated torque and power with the use of anisotropic bonded magnets, demonstrating the potential for reduction of critical materials in permanent magnets for renewable energy applications. This work was supported by the Critical Materials Institute, an Energy Innovation Hub funded by the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Advanced Manufacturing Office.

Cost effectiveness of mesh prophylaxis to prevent parastomal hernia in patients undergoing permanent colostomy for rectal cancer.

PubMed

Lee, Lawrence; Saleem, Abdulaziz; Landry, Tara; Latimer, Eric; Chaudhury, Prosanto; Feldman, Liane S

2014-01-01

Parastomal hernia (PSH) is common after stoma formation. Studies have reported that mesh prophylaxis reduces PSH, but there are no cost-effectiveness data. Our objective was to determine the cost effectiveness of mesh prophylaxis vs no prophylaxis to prevent PSH in patients undergoing abdominoperineal resection with permanent colostomy for rectal cancer. Using a cohort Markov model, we modeled the costs and effectiveness of mesh prophylaxis vs no prophylaxis at the index operation in a cohort of 60-year-old patients undergoing abdominoperineal resection for rectal cancer during a time horizon of 5 years. Costs were expressed in 2012 Canadian dollars (CAD$) and effectiveness in quality-adjusted life years. Deterministic and probabilistic sensitivity analyses were performed. In patients with stage I to III rectal cancer, prophylactic mesh was dominant (less costly and more effective) compared with no mesh. In patients with stage IV disease, mesh prophylaxis was associated with higher cost (CAD$495 more) and minimally increased effectiveness (0.05 additional quality-adjusted life years), resulting in an incremental cost-effectiveness ratio of CAD$10,818 per quality-adjusted life year. On sensitivity analyses, the decision was sensitive to the probability of mesh infection and the cost of the mesh, and method of diagnosing PSH. In patients undergoing abdominoperineal resection with permanent colostomy for rectal cancer, mesh prophylaxis might be the less costly and more effective strategy compared with no mesh to prevent PSH in patients with stage I to III disease, and might be cost effective in patients with stage IV disease. Copyright © 2014 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

Workplace bullying a risk for permanent employees.

PubMed

Keuskamp, Dominic; Ziersch, Anna M; Baum, Fran E; Lamontagne, Anthony D

2012-04-01

We tested the hypothesis that the risk of experiencing workplace bullying was greater for those employed on casual contracts compared to permanent or ongoing employees. A cross-sectional population-based telephone survey was conducted in South Australia in 2009. Employment arrangements were classified by self-report into four categories: permanent, casual, fixed-term and self-employed. Self-report of workplace bullying was modelled using multiple logistic regression in relation to employment arrangement, controlling for sex, age, working hours, years in job, occupational skill level, marital status and a proxy for socioeconomic status. Workplace bullying was reported by 174 respondents (15.2%). Risk of workplace bullying was higher for being in a professional occupation, having a university education and being separated, divorced or widowed, but did not vary significantly by sex, age or job tenure. In adjusted multivariate logistic regression models, casual workers were significantly less likely than workers on permanent or fixed-term contracts to report bullying. Those separated, divorced or widowed had higher odds of reporting bullying than married, de facto or never-married workers. Contrary to expectation, workplace bullying was more often reported by permanent than casual employees. It may represent an exposure pathway not previously linked with the more idealised permanent employment arrangement. A finer understanding of psycho-social hazards across all employment arrangements is needed, with equal attention to the hazards associated with permanent as well as casual employment. © 2012 The Authors. ANZJPH © 2012 Public Health Association of Australia.

Shear bond strength of orthodontic brackets and disinclusion buttons: effect of water and saliva contamination.

PubMed

Sfondrini, Maria Francesca; Fraticelli, Danilo; Gandini, Paola; Scribante, Andrea

2013-01-01

The aim of this study was to assess the effect of water and saliva contamination on the shear bond strength and failure site of orthodontic brackets and lingual buttons. 120 bovine permanent mandibular incisors were randomly divided into 6 groups of 20 specimens each. Both orthodontic brackets and disinclusion buttons were tested under three different enamel surface conditions: (a) dry, (b) water contamination, and (c) saliva contamination. Brackets and buttons were bonded to the teeth and subsequently tested using a Instron universal testing machine. Shear bond strength values and adhesive failure rate were recorded. Statistical analysis was performed using ANOVA and Tukey tests (strength values) and Chi squared test (ARI Scores). Noncontaminated enamel surfaces showed the highest bond strengths for both brackets and buttons. Under water and saliva contamination orthodontic brackets groups showed significantly lower shear strengths than disinclusion buttons groups. Significant differences in debond locations were found among the groups under the various enamel surface conditions. Water and saliva contamination of enamel during the bonding procedure lowers bond strength values, more with orthodontic brackets than with disinclusion buttons.

Dislocated Workers. Trade Adjustment Assistance Program Flawed. Statement of Linda G. Morra, Director of Education and Employment Issues, Human Resources Division. Testimony before the Subcommittee on Employment, Housing and Aviation, Committee on Government Operations, House of Representatives.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC. Div. of Human Resources.

The Trade Adjustment Assistance (TAA) program is designed to help the more than 1 million workers per year who lose their jobs because of permanent layoffs or plant closures, due in part because of imports. Studies show, however, that the TAA program fails to meet the seven goals of a successful reemployment assistance program: (1) TAA benefits…

Econometrics and Psychometrics: A Survey of Communalities

ERIC Educational Resources Information Center

Goldberger, Arthur S.

1971-01-01

Several themes which are common to both econometrics and psychometrics are surveyed. The themes are illustrated by reference to permanent income hypotheses, simultaneous equation models, adaptive expectations and partial adjustment schemes, and by reference to test score theory, factor analysis, and time-series models. (Author)

8 CFR 209.1 - Adjustment of status of refugees.

Code of Federal Regulations, 2011 CFR

2011-01-01

... admission. The refugee is, however, required to establish compliance with the vaccination requirements... a vaccination supplement, completed by a designated civil surgeon in the United States. (d..., inform the applicant of his or her right to renew the request for permanent residence in removal...

8 CFR 209.1 - Adjustment of status of refugees.

Code of Federal Regulations, 2010 CFR

2010-01-01

... admission. The refugee is, however, required to establish compliance with the vaccination requirements... a vaccination supplement, completed by a designated civil surgeon in the United States. (d..., inform the applicant of his or her right to renew the request for permanent residence in removal...

Universal Parameter Measurement and Sensorless Vector Control of Induction and Permanent Magnet Synchronous Motors

NASA Astrophysics Data System (ADS)

Yamamoto, Shu; Ara, Takahiro

Recently, induction motors (IMs) and permanent-magnet synchronous motors (PMSMs) have been used in various industrial drive systems. The features of the hardware device used for controlling the adjustable-speed drive in these motors are almost identical. Despite this, different techniques are generally used for parameter measurement and speed-sensorless control of these motors. If the same technique can be used for parameter measurement and sensorless control, a highly versatile adjustable-speed-drive system can be realized. In this paper, the authors describe a new universal sensorless control technique for both IMs and PMSMs (including salient pole and nonsalient pole machines). A mathematical model applicable for IMs and PMSMs is discussed. Using this model, the authors derive the proposed universal sensorless vector control algorithm on the basis of estimation of the stator flux linkage vector. All the electrical motor parameters are determined by a unified test procedure. The proposed method is implemented on three test machines. The actual driving test results demonstrate the validity of the proposed method.

Prevalence and correlates of depression among new U.S. immigrants.

PubMed

Wong, Eunice C; Miles, Jeremy N V

2014-06-01

Although immigrants comprise one of the fastest growing segments of society, information on their adjustment to life in the US remains limited. The present study examined the prevalence of depression and associated correlates among a national sample of immigrants newly admitted to legal permanent residence to the US. Data were derived from the baseline adult cohort of the New Immigrant Survey, a national representative sample of immigrants who had obtained legal permanent residence between May and November 2003. Approximately 3% of respondents met criteria for probable depression in the past 12 months. Respondents who were female, younger in age, in the US for a longer period of time, and exposed to political violence in their country of origin were more likely to meet criteria for probable depression. Both pre-immigration and resettlement related factors were associated with probable depression. Further research is needed to better understand how processes in the country of origin and in the resettlement country influence the adjustment of immigrants.

Wood Products Thermal Degradation and Fire

Treesearch

Mark Dietenberger; Laura Hasburgh

2016-01-01

As wood reaches elevated temperatures, the different chemical components undergo thermal degradation that affect the performance of wood. The extent of these changes depends on the temperature level and length of time under exposure conditions. Permanent reductions in strength and modulus of elasticity can occur at temperatures >65 °C, with the amount depending...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prodan, V.D.

The working load on the fastening parts of a permanent tight joint, which determines the strength, and on the gasket, which determines the hermeticity of the joint, depends on the stress of preliminary tightening. This stress must be determined when calculating the force distribution of the joint, since it depends on the magnitude of the stress whether the joint is capable of withstanding the internal pressure of the medium in the vessel without disturbing the tightness of the joint and strength of its parts. The seal will be hermetic when the specific load on the sealing surfaces of the lenticularmore » gasket becomes equal to or higher than the specific load established for given conditions of pressure and properties of the sealing medium. The recommended specific load was calculated for nitrogen as the working medium. The required tightening stress was calculated for standard flange joints with a lenticular gasket of nominal diameter 25-200mm at a working pressure of 32 MPa. The equations given can also be used to calculate the stress of preliminary tightening of the fastening parts and of other types of permanent tight joints with partial radial self-sealing.« less

Permanent Mold Casting of JIS-AC4C Aluminum Alloy Using a Low-Temperature Mold

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yamagata, Hiroshi; Nikawa, Makoto

2011-01-17

Permanent mold casting using mold temperatures below 200 deg. C was conducted to obtain a high-strength, thin-walled casting. Al-7.36 mass% Si -0.18 Cu- 0.27Mg-0.34Fe alloy JIS-AC4C was cast using a bottom pouring cast plan. The product had a rectangular tube shape (70 mm W x 68 mm D x 180 mm H) with wall thicknesses of 1, 3 and 5 mm. The effect of heat insulation at the melt path was compared when using a sand runner insert and when using a steel runner insert as well as a powder mold release agent. Fine microstructures were observed in the casting.more » The smaller the thickness, the higher the hardness with smaller secondary dendrite arm spacing (SDAS). However, the hardness and the SDAS were unaffected by the mold temperature. It was proposed that the avoidance of the formation of primary {alpha} dendrite at the melt path generates a higher strength casting with adequate mold filling.« less

Erratum to: Application of addition-cured silicone denture relining materials to adjust mouthguards.

PubMed

Fukasawa, Shintaro; Churei, Hiroshi; Chowdhury, Ruman Uddin; Shirako, Takahiro; Shahrin, Sharika; Shrestha, Abhishekhi; Wada, Takahiro; Uo, Motohiro; Takahashi, Hidekazu; Ueno, Toshiaki

2016-01-01

The purposes of this study were to examine the shock absorption capability of addition-cured silicone denture relining materials and the bonding strength of addition-cured silicone denture relining materials and a commercial mouthguard material to determine its applicability to mouthguard adjustment. Two addition-cured silicone denture relining materials were selected as test materials. The impact test was applied by a free-falling steel ball. On the other hand, bonding strength was determined by a delamination test. After prepared surface treatments using acrylic resin on MG sheet surface, 2 types of addition-cured silicone denture relining materials were glued to MG surface. The peak intensity, the time to peak intensity from the onset of the transmitted force and bonding strength were statistically analyzed using ANOVA and Tukey's honest significant difference post hoc test (p<0.05). These results suggest that the silicone denture relining materials could be clinically applicable as a mouthguard adjustment material.

A Comparative Study on Permanent Mold Cast and Powder Thixoforming 6061 Aluminum Alloy and Sicp/6061Al Composite: Microstructures and Mechanical Properties.

PubMed

Zhang, Xuezheng; Chen, Tijun; Qin, He; Wang, Chong

2016-05-24

Microstructural and mechanical characterization of 10 vol% SiC particles (SiC p ) reinforced 6061 Al-based composite fabricated by powder thixoforming (PTF) was investigated in comparison with the PTF and permanent mold cast (PMC) 6061 monolithic alloys. The results reveal that the microstructure of the PMC alloy consists of coarse and equiaxed α dendrites and interdendritic net-like eutectic phases. However, the microstructure of the PTF composite, similar to that of the PTF alloy, consists of near-spheroidal primary particles and intergranular secondarily solidified structures except SiC p , which are distributed in the secondarily solidified structures. The eutectics amount in the PTF materials is distinctly lower than that in the PMC alloy, and the microstructures of the former materials are quite compact while that of the latter alloy is porous. Therefore, the PTF alloy shows better tensile properties than the PMC alloy. Owing to the existence of the SiC reinforcing particles, the PTF composite attains an ultimate tensile strength and yield strength of 230 MPa and 128 MPa, representing an enhancement of 27.8% and 29.3% than those (180 MPa and 99 MPa) of the PTF alloy. A modified model based on three strengthening mechanisms was proposed to calculate the yield strength of the PTF composite. The obtained theoretical results were quite consistent with the experimental data.

The predictive value of self-rated health in the presence of subjective memory complaints on permanent nursing home placement in elderly primary care patients over 4-year follow-up.

PubMed

Nielsen, Anni B S; Siersma, Volkert; Waldemar, Gunhild; Waldorff, Frans B

2014-01-01

self-rated health (SRH) predicts nursing home (NH) placement; subjective memory complaints (SMC) too. However, the predictive value of SRH in the presence of SMC is unclear. seven-hundred fifty-seven non-nursing home residents ≥65 years from general practices in Central Copenhagen were followed for 4 years (2002-2006). Patients gave information on SRH, cognition (SMC and MMSE), quality of life (EQ-5D) and socio-demographics. Information on comorbidities and permanent NH placement came from registries. The association between SRH (dichotomised into good versus poor) and SMC, and permanent NH placement was assessed using Cox proportional hazard regression adjusted for potential confounders. NH placement totaled 6.5% at 4-year follow-up. Poor SRH increased NH placement [hazard ratio (HR) = 2.07, 95% CI: 1.11-3.87] adjusted for age, SMC, MMSE, sex and comorbidities. SRH was not associated with NH placement if accounting for additional health information; however, SMC was (HR = 2.47, 95% CI: 1.26-4.86). Increased placement was seen for patients with good SRH and SMC (HR = 6.64, 95% CI: 2.31-19.12), but not among patients with poor SRH and SMC (HR = 1.37, 95% CI: 0.59-3.20) when compared with the reference group (good SRH and without SMC). both poor SRH and SMC were associated with permanent NH placement risk among elderly primary care patients. However, when SMC was present a reverse association was found for SRH: good SRH increased NH placement. Since SRH is integrated in widely used psychometric instruments, further research is needed to establish the mechanism and implications of this finding.

Development of a compact electron-cyclotron-resonance ion source for high-energy carbon-ion therapy

NASA Astrophysics Data System (ADS)

Muramatsu, M.; Kitagawa, A.; Sakamoto, Y.; Sato, S.; Sato, Y.; Ogawa, Hirotsugu; Yamada, S.; Ogawa, Hiroyuki; Yoshida, Y.; Drentje, A. G.

2005-11-01

Ion sources for medical facilities should have characteristics of easy maintenance, low electric power consumption, good stability, and long operation time without problems (one year or longer). For this, a 10GHz compact electron-cyclotron-resonance ion source with all-permanent magnets (Kei2 source) was developed. The maximum mirror magnetic fields on the beam axis are 0.59T at the extraction side and 0.87T at the gas-injection side, while the minimum B strength is 0.25T. These parameters have been optimized for the production of C4+ based on the experience at the 10GHz NIRS-ECR ion source and a previous prototype compact source (Kei source). The Kei2 source has a diameter of 320mm and a length of 295mm. The beam intensity of C4+ was obtained to be 530μA under an extraction voltage of 40kV. The beam stability was better than 6% at C4+ of 280μA during 90h with no adjustment of the operation parameters. The details of the design and beam tests of the source are described in this paper.

Sweeping Changes in Immigration Law

ERIC Educational Resources Information Center

Danilov, Dan P.

1978-01-01

Among the changes in Immigration Laws are the rectification of the long-standing inequity between the Eastern and Western Hemispheres by instituting identical preference systems, the provision for the adjustment from a non-immigrant visa status to that of a permanent resident, and amendments to the Labor Certification requirements. (NQ)

Against the Corporal Punishment of Children

ERIC Educational Resources Information Center

Clark, John

2004-01-01

John Wilson suggests there are six advantages for corporal punishment: cheap and easy to administer, effective deterrent, effective reform, adjustable pain, fair because of similar dislike of pain, no permanent damage. None of these survive close scrutiny. An alternative, deontological argument against corporal punishment is proposed building on…

Association of early- and adult-life socioeconomic circumstances with muscle strength in older age.

PubMed

Cheval, Boris; Boisgontier, Matthieu P; Orsholits, Dan; Sieber, Stefan; Guessous, Idris; Gabriel, Rainer; Stringhini, Silvia; Blane, David; van der Linden, Bernadette W A; Kliegel, Matthias; Burton-Jeangros, Claudine; Courvoisier, Delphine S; Cullati, Stéphane

2018-05-01

socioeconomic circumstances (SEC) during a person's lifespan influence a wide range of health outcomes. However, solid evidence of the association of early- and adult-life SEC with health trajectories in ageing is still lacking. This study assessed whether early-life SEC are associated with muscle strength in later life-a biomarker of health-and whether this relationship is caused by adult-life SEC and health behaviours. we used data from the Survey of Health Ageing and Retirement in Europe, a 12-year population-based cohort study with repeated measurement in six waves (2004-15) and retrospective collection of life-course data. Participants' grip strength was assessed by using a handheld dynamometer. Confounder-adjusted logistic mixed-effect models were used to examine the associations of early- and adult-life SEC with the risk of low muscle strength (LMS) in older age. a total of 24,179 participants (96,375 observations) aged 50-96 living in 14 European countries were included in the analyses. Risk of LMS was increased with disadvantaged relative to advantaged early-life SEC. The association between risk of LMS and disadvantaged early-life SEC gradually decreased when adjusting for adult-life SEC for both sexes and with unhealthy behaviours for women. After adjusting for these factors, all associations between risk of LMS and early-life SEC remained significant for women. early-life SEC are associated with muscle strength after adjusting for adult-life SEC and behavioural lifestyle factors, especially in women, which suggests that early life may represent a sensitive period for future health.

Endogenous hormones, muscle strength, and risk of fall-related fractures in older women.

PubMed

Sipilä, Sarianna; Heikkinen, Eino; Cheng, Sulin; Suominen, Harri; Saari, Päivi; Kovanen, Vuokko; Alén, Markku; Rantanen, Taina

2006-01-01

Among older people, fracture-causing fall often leads to health deterioration. The role of endogenous hormone status and muscle strength on fall-related fracture risk is unclear. This study investigates if, after adjustment for bone density, endogenous hormones and muscle strength would predict fall-related limb fracture incidence in older community-dwelling women followed-up over 10 years. As a part of a prospective population-based study, 187 75-year-old women were investigated. Serum estradiol, testosterone, sex hormone binding globulin, and dehydroepiandrosterone sulfate concentrations were analyzed, and isometric muscle strength and bone mineral density were assessed. Fall-related limb fractures were gathered from patient records. Serum estradiol concentration was a significant predictor of fall-related limb fractures. Women with serum estradiol concentrations less than 0.022 nmol/L had a 3-fold risk (relative risk 3.05; 95% confidence interval, 1.26-7.36), and women with estradiol concentrations between 0.022 and 0.066 nmol/L doubled the risk (relative risk 2.24; 95% confidence interval, 0.97-5.19) of fall-related limb fracture compared to the women with estradiol concentrations ()above 0.066 nmol/L. Adjustment for muscle strength and bone mineral density did not materially change the risk estimates. High muscle strength was associated with a low incidence of fall-related limb fractures. This study showed that in 75-year-old women higher serum estradiol concentration and greater muscle strength were independently associated with a low incidence of fall-related limb fractures even after adjustment for bone density. Our results suggest that hormonal status and muscle strength have their own separate mechanisms protecting from fall-related fractures. This finding is of importance in developing preventive strategies, but calls for further study.

A novel safety device with metal counter meshing gears discriminator directly driven by axial flux permanent magnet micromotors based on MEMS technology

NASA Astrophysics Data System (ADS)

Zhang, Weiping; Chen, Wenyuan; Zhao, Xiaolin; Li, Shengyong; Jiang, Yong

2005-08-01

In a novel safety device based on MEMS technology for high consequence systems, the discriminator consists of two groups of metal counter meshing gears and two pawl/ratchet wheel mechanisms. Each group of counter meshing gears is onepiece and driven directly by an axial flux permanent magnet micromotor respectively. The energy-coupling element is an optical shutter with two collimators and a coupler wheel. The safety device's probability is less than 1/106. It is fabricated by combination of an LiGA-like process and precision mechanical engineering. The device has simple structure, few dynamic problems, high strength and strong reliability.

Design and analysis of linear oscillatory single-phase permanent magnet generator for free-piston stirling engine systems

NASA Astrophysics Data System (ADS)

Kim, Jeong-Man; Choi, Jang-Young; Lee, Kyu-Seok; Lee, Sung-Ho

2017-05-01

This study focuses on the design and analysis of a linear oscillatory single-phase permanent magnet generator for free-piston stirling engine (FPSE) systems. In order to implement the design of linear oscillatory generator (LOG) for suitable FPSEs, we conducted electromagnetic analysis of LOGs with varying design parameters. Then, detent force analysis was conducted using assisted PM. Using the assisted PM gave us the advantage of using mechanical strength by detent force. To improve the efficiency, we conducted characteristic analysis of eddy-current loss with respect to the PM segment. Finally, the experimental result was analyzed to confirm the prediction of the FEA.

Mechanical properties of as-cast and heat-treated ZA-27 alloy/short glass fiber composites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sharma, S.C.; Girish, B.M.; Satish, B.M.

1998-02-01

This paper reports on the mechanical properties of as-cast and heat-treated ZA-27 alloy composites reinforced with glass fibers from 1 to 5 wt%. The composites were fabricated using the Compocasting method, in which short glass fibers were introduced into the vortex created in the molten alloy through an impeller rotated at 500 rpm. The molten mass was thoroughly stirred and poured into permanent molds and squeezed under pressure. The specimens were heat treated at 320 C for 1, 2, 3, and 4 h. The tests on the as-cast composites revealed that as the glass content in the composites was increased,more » the ultimate tensile strength (UTS), compressive strength, and hardness of the composite increased, while the ductility and impact strength were decreased. Heat treatment was found to improve significantly the ductility, compressive strength, and impact strength, while the hardness and UTS were reduced. This paper discusses the behavior of these composites.« less

After Divorce: Personality Factors Related to the Process of Adjustment.

ERIC Educational Resources Information Center

Thomas, Sandra Paul

1982-01-01

Considered personality variables related to postdivorce adjustment using a sample of 58 females and 31 males. Found persons with the best adjustment scored significantly higher on dominance/assertiveness, self-assurance, intelligence, creativity/imagination, social boldness, liberalism, self-sufficiency, ego strength and tranquility. (Author/JAC)

Atomic structure and domain wall pinning in samarium-cobalt-based permanent magnets.

PubMed

Duerrschnabel, M; Yi, M; Uestuener, K; Liesegang, M; Katter, M; Kleebe, H-J; Xu, B; Gutfleisch, O; Molina-Luna, L

2017-07-04

A higher saturation magnetization obtained by an increased iron content is essential for yielding larger energy products in rare-earth Sm 2 Co 17 -type pinning-controlled permanent magnets. These are of importance for high-temperature industrial applications due to their intrinsic corrosion resistance and temperature stability. Here we present model magnets with an increased iron content based on a unique nanostructure and -chemical modification route using Fe, Cu, and Zr as dopants. The iron content controls the formation of a diamond-shaped cellular structure that dominates the density and strength of the domain wall pinning sites and thus the coercivity. Using ultra-high-resolution experimental and theoretical methods, we revealed the atomic structure of the single phases present and established a direct correlation to the macroscopic magnetic properties. With further development, this knowledge can be applied to produce samarium cobalt permanent magnets with improved magnetic performance.Understanding the factors that determine the properties of permanent magnets, which play a central role in many industrial applications, can help in improving their performance. Here, the authors study how changes in the iron content affect the microstructure of samarium cobalt magnets.

8 CFR 1245.4 - Documentary requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Documentary requirements. 1245.4 Section 1245.4 Aliens and Nationality EXECUTIVE OFFICE FOR IMMIGRATION REVIEW, DEPARTMENT OF JUSTICE IMMIGRATION REGULATIONS ADJUSTMENT OF STATUS TO THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 1245.4 Documentary requirements. The provisions of part 1211...

8 CFR 1245.4 - Documentary requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 8 Aliens and Nationality 1 2013-01-01 2013-01-01 false Documentary requirements. 1245.4 Section 1245.4 Aliens and Nationality EXECUTIVE OFFICE FOR IMMIGRATION REVIEW, DEPARTMENT OF JUSTICE IMMIGRATION REGULATIONS ADJUSTMENT OF STATUS TO THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 1245.4 Documentary requirements. The provisions of part 1211...

8 CFR 1245.4 - Documentary requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 8 Aliens and Nationality 1 2012-01-01 2012-01-01 false Documentary requirements. 1245.4 Section 1245.4 Aliens and Nationality EXECUTIVE OFFICE FOR IMMIGRATION REVIEW, DEPARTMENT OF JUSTICE IMMIGRATION REGULATIONS ADJUSTMENT OF STATUS TO THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 1245.4 Documentary requirements. The provisions of part 1211...

8 CFR 1245.4 - Documentary requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 8 Aliens and Nationality 1 2011-01-01 2011-01-01 false Documentary requirements. 1245.4 Section 1245.4 Aliens and Nationality EXECUTIVE OFFICE FOR IMMIGRATION REVIEW, DEPARTMENT OF JUSTICE IMMIGRATION REGULATIONS ADJUSTMENT OF STATUS TO THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 1245.4 Documentary requirements. The provisions of part 1211...

8 CFR 1245.4 - Documentary requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 8 Aliens and Nationality 1 2014-01-01 2014-01-01 false Documentary requirements. 1245.4 Section 1245.4 Aliens and Nationality EXECUTIVE OFFICE FOR IMMIGRATION REVIEW, DEPARTMENT OF JUSTICE IMMIGRATION REGULATIONS ADJUSTMENT OF STATUS TO THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 1245.4 Documentary requirements. The provisions of part 1211...

8 CFR 1245.6 - Interview.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Interview. 1245.6 Section 1245.6 Aliens and... OF STATUS TO THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 1245.6 Interview. Each applicant for adjustment of status under this part shall be interviewed by an immigration officer. This interview may be...

8 CFR 1245.2 - Application.

Code of Federal Regulations, 2010 CFR

2010-01-01

... ADJUSTMENT OF STATUS TO THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 1245.2 Application. (a) General—(1... Residence. The application must be accompanied by the appropriate fee as explained in the instructions to... in lawful V status shall not be deemed an abandonment of the application if, upon returning to this...

8 CFR 1245.5 - Medical examination.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 8 Aliens and Nationality 1 2014-01-01 2014-01-01 false Medical examination. 1245.5 Section 1245.5... REGULATIONS ADJUSTMENT OF STATUS TO THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 1245.5 Medical... have a medical examination by a designated civil surgeon, whose report setting forth the findings of...

8 CFR 1245.5 - Medical examination.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 8 Aliens and Nationality 1 2012-01-01 2012-01-01 false Medical examination. 1245.5 Section 1245.5... REGULATIONS ADJUSTMENT OF STATUS TO THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 1245.5 Medical... have a medical examination by a designated civil surgeon, whose report setting forth the findings of...

8 CFR 1245.5 - Medical examination.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 8 Aliens and Nationality 1 2013-01-01 2013-01-01 false Medical examination. 1245.5 Section 1245.5... REGULATIONS ADJUSTMENT OF STATUS TO THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 1245.5 Medical... have a medical examination by a designated civil surgeon, whose report setting forth the findings of...

42 CFR 419.70 - Transitional adjustments to limit decline in payments.

Code of Federal Regulations, 2011 CFR

2011-10-01

... community hospital under § 412.109 of this chapter. (3) Permanent treatment for cancer hospitals and... amount. (d) Hold harmless provisions—(1) Temporary treatment for small rural hospitals before January 1... chapter. (2) Temporary treatment for small rural hospitals on or after January 1, 2006. For covered...

8 CFR 1245.5 - Medical examination.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Medical examination. 1245.5 Section 1245.5... REGULATIONS ADJUSTMENT OF STATUS TO THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 1245.5 Medical... have a medical examination by a designated civil surgeon, whose report setting forth the findings of...

8 CFR 1245.5 - Medical examination.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 8 Aliens and Nationality 1 2011-01-01 2011-01-01 false Medical examination. 1245.5 Section 1245.5... REGULATIONS ADJUSTMENT OF STATUS TO THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 1245.5 Medical... have a medical examination by a designated civil surgeon, whose report setting forth the findings of...

8 CFR 245a.33 - Filing.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS ADJUSTMENT OF STATUS TO THAT OF PERSONS ADMITTED FOR LAWFUL TEMPORARY OR PERMANENT RESIDENT STATUS UNDER SECTION 245A OF THE IMMIGRATION AND... notice to appear until 90 days from the date of the initial denial, to allow the alien the opportunity to...

39 CFR 3010.23 - Calculation of percentage change in rates.

Code of Federal Regulations, 2014 CFR

2014-07-01

... adjustment for rates of general applicability. A seasonal or temporary rate shall be identified and treated as a rate cell separate and distinct from the corresponding non-seasonal or permanent rate. (b) For... based on known mail characteristics or historical volume data, as opposed to forecasts of mailer...

Root Tip Shape Governs Root Elongation Rate under Increased Soil Strength1[OPEN

PubMed Central

Kirchgessner, Norbert; Walter, Achim

2017-01-01

Increased soil strength due to soil compaction or soil drying is a major limitation to root growth and crop productivity. Roots need to exert higher penetration force, resulting in increased penetration stress when elongating in soils of greater strength. This study aimed to quantify how the genotypic diversity of root tip geometry and root diameter influences root elongation under different levels of soil strength and to determine the extent to which roots adjust to increased soil strength. Fourteen wheat (Triticum aestivum) varieties were grown in soil columns packed to three bulk densities representing low, moderate, and high soil strength. Under moderate and high soil strength, smaller root tip radius-to-length ratio was correlated with higher genotypic root elongation rate, whereas root diameter was not related to genotypic root elongation. Based on cavity expansion theory, it was found that smaller root tip radius-to-length ratio reduced penetration stress, thus enabling higher root elongation rates in soils with greater strength. Furthermore, it was observed that roots could only partially adjust to increased soil strength. Root thickening was bounded by a maximum diameter, and root tips did not become more acute in response to increased soil strength. The obtained results demonstrated that root tip geometry is a pivotal trait governing root penetration stress and root elongation rate in soils of greater strength. Hence, root tip shape needs to be taken into account when selecting for crop varieties that may tolerate high soil strength. PMID:28600344

Developmental Model Using Gestalt-Play versus Cognitive-Verbal Group with Chinese Adolescents: Effects on Strengths and Adjustment Enhancement

ERIC Educational Resources Information Center

Shen, Yih-Jiun

2007-01-01

This study compared the effectiveness of short-term developmental group counseling applying Gestalt-play versus cognitive-verbal approaches with Taiwanese adolescents. On a measure of behavioral and emotional strengths, teachers reported significant changes in students' overall behavioral and emotional strengths measured via total scores. Specific…

Testing of the permanent magnet material Mn-Al-C for potential use in propulsion motors for electric vehicles

NASA Technical Reports Server (NTRS)

Abdelnour, Z. A.; Mildrum, H. F.; Strnat, K. J.

1980-01-01

The development of Mn-Al-C permanent magnets is reviewed. The general properties of the material are discussed and put into perspective relative to alnicos and ferrites. The commercial material now available is described by the manufacturer's data. The traction motor designer's demands of a permanent magnet for potential use in electric vehicle drives are reviewed. From this, a list of the needed specific information is extracted. A plan for experimental work is made which would generate this information, or verify data supplied by the producer. The results of these measurements are presented in the form of tables and graphs. The tests determined magnetic design data and some mechanical strength properties. Easy axis hysteresis and demagnetization curves, recoil loops and other minor loop fields were measured over a temperature range from -50 C to +150 C. Hysteresis loops were also measured for three orthogonal directions (the easy and 2 hard axes of magnetization).

Simulation of double stage hall thruster with double-peaked magnetic field

NASA Astrophysics Data System (ADS)

Ding, Yongjie; Li, Peng; Sun, Hezhi; Wei, Liqiu; Xu, Yu; Peng, Wuji; Su, Hongbo; Li, Hong; Yu, Daren

2017-07-01

This study adopts double permanent magnetic rings and four permanent magnetic rings to form two symmetrical magnetic peaks and two asymmetrical magnetic peaks in the channel of a Hall thruster, and uses a 2D-3V PIC-MCC model to analyze the influence of magnetic strength on the discharge characteristic and performance of Hall thrusters with an intermediate electrode and double-peaked magnetic field. As opposed to the two symmetrical magnetic peaks formed by double permanent magnetic rings, increasing the magnetic peak value deep within the channel can cause propellant ionization to occur; with the increase in the magnetic peak deep in the channel, the propellant utilization, thrust, and anode efficiency of the thruster are significantly improved. Double-peaked magnetic field can realize separate control of ionization and acceleration in a Hall thruster, and provide technical means for further improving thruster performance. Contribution to the Topical Issue "Physics of Ion Beam Sources", edited by Holger Kersten and Horst Neumann.

Follow-up of permanent hearing impairment in childhood.

PubMed

Della Volpe, A; De Lucia, A; Pastore, V; Bracci Laudiero, L; Buonissimo, I; Ricci, G

2016-02-01

Programmes for early childhood childhood hearing impairment identification allows to quickly start the appropriate hearing aid fitting and rehabilitation process; nevertheless, a large number of patients do not join the treatment program. The goal of this article is to present the results of a strategic review of the strengths, weaknesses, opportunities and threats connected with the audiologic/prosthetic/language follow-up process of children with bilateral permanent hearing impairment. Involving small children, the follow-up includes the involvement of specialised professionals of a multidisciplinary team and a complex and prolonged multi-faced management. Within the framework of the Italian Ministry of Health project CCM 2013 "Preventing Communication Disorders: a Regional Program for Early Identification, Intervention and Care of Hearing Impaired Children", the purpose of this analysis was to propose recommendations that can harmonise criteria for outcome evaluation and provide guidance on the most appropriate assessment methods to be used in the follow-up course of children with permanent hearing impairment. © Copyright by Società Italiana di Otorinolaringologia e Chirurgia Cervico-Facciale.

Deformation of metal brackets: a comparative study.

PubMed

Flores, D A; Choi, L K; Caruso, J M; Tomlinson, J L; Scott, G E; Jeiroudi, M T

1994-01-01

The purpose of this study was to determine the effect of material and design on the force and stress required to permanently deform metal brackets. Fourteen types of metal brackets were categorized according to raw material composition, slot torque degree, and wing type. Five types of raw materials, three types of slot torque degree, and four types of wing design were tested using an archwire torque test developed by Flores. An analysis of variance (ANOVA) and t-test showed that all three categories had a significant effect on the force and stress needed to permanently deform metal brackets. Of the three, raw material had the greatest effect on the amount of force. Results showed that 17-4PH and 303S had higher yield strengths and regular twin brackets had higher resistance to deformation. Also, as slot torque degree increased, brackets deformed with less force. Result confirmed that brackets requiring the greatest stress to permanently deform were made of steel with the greatest hardness.

Permanent magnet system to guide superparamagnetic particles

NASA Astrophysics Data System (ADS)

Baun, Olga; Blümler, Peter

2017-10-01

A new concept of using permanent magnet systems for guiding superparamagnetic nano-particles on arbitrary trajectories over a large volume is proposed. The basic idea is to use one magnet system which provides a strong, homogeneous, dipolar magnetic field to magnetize and orient the particles, and a second constantly graded, quadrupolar field, superimposed on the first, to generate a force on the oriented particles. In this configuration the motion of the particles is driven predominantly by the component of the gradient field which is parallel to the direction of the homogeneous field. As a result, particles are guided with constant force and in a single direction over the entire volume. The direction is simply adjusted by varying the angle between quadrupole and dipole. Since a single gradient is impossible due to Gauß' law, the other gradient component of the quadrupole determines the angular deviation of the force. However, the latter can be neglected if the homogeneous field is stronger than the local contribution of the quadrupole field. A possible realization of this idea is a coaxial arrangement of two Halbach cylinders. A dipole to evenly magnetize and orient the particles, and a quadrupole to generate the force. The local force was calculated analytically for this particular geometry and the directional limits were analyzed and discussed. A simple prototype was constructed to demonstrate the principle in two dimensions on several nano-particles of different size, which were moved along a rough square by manual adjustment of the force angle. The observed velocities of superparamagnetic particles in this prototype were always several orders of magnitude higher than the theoretically expected value. This discrepancy is attributed to the observed formation of long particle chains as a result of their polarization by the homogeneous field. The magnetic moment of such a chain is then the combination of that of its constituents, while its hydrodynamic radius stays low. A complete system will consist of another quadrupole (third cylinder) to additionally enable scaling of the gradient/force strength by another rotation. In this configuration the device could then also be used as a simple MRI machine to image the particles between movement intervals. Finally, a concept is proposed by which superparamagnetic particles can be guided in three-dimensional space.

Organizational justice and psychological distress among permanent and non-permanent employees in Japan: a prospective cohort study.

PubMed

Inoue, Akiomi; Kawakami, Norito; Tsuno, Kanami; Tomioka, Kimiko; Nakanishi, Mayuko

2013-06-01

Organizational justice has recently been introduced as a new concept as psychosocial determinants of employee health, and an increase in precarious employment is a challenging issue in occupational health. However, no study investigated the association of organizational justice with mental health among employees while taking into account employment contract. The purpose of the present study was to investigate the prospective association of organizational justice (procedural justice and interactional justice) with psychological distress by employment contract among Japanese employees. A total of 373 males and 644 females from five branches of a manufacturing company in Japan were surveyed. At baseline (August 2009), self-administered questionnaires, including the Organizational Justice Questionnaire (OJQ), the K6 scale (psychological distress scale), the Eysenck Personality Questionnaire-Revised (EPQ-R), and other covariates, were used. After one-year follow-up (August 2010), the K6 scale was used again to assess psychological distress. Multiple logistic regression analyses were conducted by sex and employment contract. After adjusting for demographic characteristics, psychological distress, and neuroticism at baseline, low procedural justice was significantly associated with a higher risk of psychological distress at follow-up among non-permanent female employees, while no significant association of procedural justice or interactional justice with psychological distress at follow-up was observed among permanent male or female employees. The results of non-permanent male employees could not be calculated because of small sample size. Low procedural justice may be an important predictor of psychological distress among non-permanent female employees.

Shear Bond Strength of Orthodontic Brackets and Disinclusion Buttons: Effect of Water and Saliva Contamination

PubMed Central

Sfondrini, Maria Francesca; Fraticelli, Danilo; Gandini, Paola

2013-01-01

Purpose. The aim of this study was to assess the effect of water and saliva contamination on the shear bond strength and failure site of orthodontic brackets and lingual buttons. Materials and Methods. 120 bovine permanent mandibular incisors were randomly divided into 6 groups of 20 specimens each. Both orthodontic brackets and disinclusion buttons were tested under three different enamel surface conditions: (a) dry, (b) water contamination, and (c) saliva contamination. Brackets and buttons were bonded to the teeth and subsequently tested using a Instron universal testing machine. Shear bond strength values and adhesive failure rate were recorded. Statistical analysis was performed using ANOVA and Tukey tests (strength values) and Chi squared test (ARI Scores). Results. Noncontaminated enamel surfaces showed the highest bond strengths for both brackets and buttons. Under water and saliva contamination orthodontic brackets groups showed significantly lower shear strengths than disinclusion buttons groups. Significant differences in debond locations were found among the groups under the various enamel surface conditions. Conclusions. Water and saliva contamination of enamel during the bonding procedure lowers bond strength values, more with orthodontic brackets than with disinclusion buttons. PMID:23762825

Muscular Strength and Power in 3-to 7-Year-Old Children.

PubMed

Fry, Andrew C; Irwin, Carol C; Nicoll, Justin X; Ferebee, David E

2015-08-01

To determine absolute and relative (adjusted for body mass) strength, mean power, and mean velocity for upper and lower body resistance exercises, forty-seven young boys and girls participated in maximal strength testing. Healthy young boys and girls, ages 3- to 7-years old, were tested for one-repetition maximum (1-RM) strength, and 70% of 1-RM to determine mean power and mean velocity on the chest press and leg press exercises. Adult weight machines were modified to accommodate the smaller size and lower strength levels of the children. A 2 × 4 (sex × age) ANOVA was used to determine age and sex differences in performance. No interaction or sex differences were observed for any variable at any age. 1-RM strength, mean power, and mean velocity significantly increased across ages (p ≤ .05). When adjusted for body mass, the changes were insignificant, with one exception. Relative mean power for the bench press increased with age. Data indicated children from 3-7 years of age are capable of performing strength and power tests, but may require more attempts at maximal loads compared with adults. It appears that muscular strength and velocity during this stage of development are primarily dependent on increasing body mass, whereas power is influenced by additional variable(s).

Relationship between muscle strength and dyslipidemia, serum 25(OH)D, and weight status among diverse schoolchildren: a cross-sectional analysis.

PubMed

Blakeley, Caitlin E; Van Rompay, Maria I; Schultz, Nicole S; Sacheck, Jennifer M

2018-02-02

The relationship between muscle strength and cardiometabolic risk factors in youth, and the potential influence of vitamin D status on this relationship, is not well understood. This study examined associations between muscle strength and dyslipidemia, serum 25-hydroxyvitamin D [25(OH)D], and weight status in diverse schoolchildren. Measures of hand-grip strength (standardized for sex and body weight), anthropometrics (height and weight converted to BMI z-score [BMIz]), sociodemographics, and fasting blood concentrations of plasma HDL-C and triglycerides and serum 25(OH)D were collected from 350 4th-8th grade schoolchildren (11.2 ± 1.3 y, 49.4% female, 56.3% non-white/Caucasian). Logistic regression was used to measure associations between standardized tertiles of grip strength and blood lipids, 25(OH)D, and weight status along with associations between 25(OH)D and dyslipidemia and weight status. Children with higher grip strength had lower odds of overweight/obesity (OR: 0.03, 95% CI: 0.01-0.06, in the highest tertile of grip strength vs. lowest, p for trend< 0.0001), borderline/low HDL-C (OR: 0.28, 95% CI: 0.16-0.50, p for trend< 0.0001), and borderline/high triglycerides (OR: 0.48, 95% CI: 0.25-0.92, p for trend< 0.05), adjusting for covariates. Associations between blood lipids and grip strength became non-significant after further adjustment for BMIz. No association was observed between grip strength and 25(OH)D, nor between 25(OH)D and borderline/low HDL-C or weight status; however, vitamin D sufficiency was associated with lower odds of borderline/high triglycerides compared with vitamin D deficiency (OR: 0.26, 95% CI: 0.09-0.74, p for trend< 0.05) before BMIz adjustment. Among racially/ethnically diverse children, muscle strength was associated with lower dyslipidemia. Longitudinal studies are needed to explore whether changes in muscle strength impact this relationship in children, independent of weight status. This study was registered at www.clinicaltrials.gov (No. NCT01537809 ) on February 17, 2012.

Grip strength and its determinants among older people in different healthcare settings

PubMed Central

Roberts, Helen C; Syddall, Holly; Butchart, Joe; Sparkes, Jonathan; Ritchie, Jan; Kerr, Alastair; Cooper, Cyrus; Sayer, Avan Aihie

2013-01-01

Background Low muscle strength is central to geriatric syndromes including sarcopenia and frailty. It is well described in community dwelling older people but the epidemiology of grip strength of older people in rehabilitation or long term care has been little explored. Objective To describe grip strength of older people in rehabilitation and nursing home settings. Design Cross-sectional epidemiological study. Setting 3 healthcare settings in one town. Subjects 101 inpatients on a rehabilitation ward, 47 community rehabilitation referrals and 100 nursing home residents. Methods Grip strength, age, height, weight, body mass index, number of co-morbidities and medications, Barthel score, mini mental state examination (MMSE), nutritional status, and number of falls in the last year were recorded. Results Grip strength differed substantially between healthcare settings for both men and women (p<0.0001). Nursing home residents had the lowest age-adjusted mean grip strength and community rehabilitation referrals the highest. Broadly higher grip strength was associated in univariate analyses with younger age, greater height and weight, fewer comorbidities, higher Barthel score, higher MMSE score, better nutritional status and fewer falls. However after mutual adjustment for these factors, the difference in grip strength between settings remained significant. Barthel score was the characteristic most strongly associated with grip strength. Conclusions Older people in rehabilitation and care home settings had lower grip strength than reported for those living at home. Furthermore grip strength varied widely between healthcare settings independent of known major influences. Further research is required to ascertain whether grip strength may help identify people at risk of adverse health outcomes within these settings. PMID:23926093

Application of addition-cured silicone denture relining materials to adjust mouthguards.

PubMed

Fukasawa, Shintaro; Churei, Hiroshi; Chowdhury, Ruman Uddin; Shirako, Takahiro; Shahrin, Sharika; Shrestha, Abhishekhi; Wada, Takahiro; Uo, Motohiro; Takahashi, Hidekazu; Ueno, Toshiaki

2016-01-01

The purposes of this study were to examine the shock absorption capability of addition-cured silicone denture relining materials and the bonding strength of addition-cured silicone denture relining materials and a commercial mouthguard material to determine its applicability to mouthguard adjustment. Two addition-cured silicone denture relining materials and eleven commercial mouthguard materials were selected as test materials. The impact test was applied by a free-falling steel ball. On the other hand, bonding strength was determined by a delamination test. After prepared surface treatments using acrylic resin on MG sheet surface, 2 types of addition-cured silicone denture relining materials were glued to MG surface. The peak intensity, the time to peak intensity from the onset of the transmitted force and bonding strength were statistically analyzed using ANOVA and Tukey's honest significant difference post hoc test (p<0.05). These results suggest that the silicone denture relining materials could be clinically applicable as a mouthguard adjustment material.

Comparison of nutritional status assessment parameters in predicting length of hospital stay in cancer patients.

PubMed

Mendes, J; Alves, P; Amaral, T F

2014-06-01

Undernutrition has been associated with an increased length of hospital stay which may reflect the patient prognosis. The aim of this study was to quantify and compare the association between nutritional status and handgrip strength at hospital admission with time to discharge in cancer patients. An observational prospective study was conducted in an oncology center. Patient-Generated Subjective Global Assessment, Nutritional Risk Screening 2002 and handgrip strength were conducted in a probabilistic sample of 130 cancer patients. The association between baseline nutritional status, handgrip strength and time to discharge was evaluated using survival analysis with discharge alive as the outcome. Nutritional risk ranged from 42.3 to 53.1% depending on the tool used. According to Patient-Generated Subjective Global Assessment severe undernutrition was present in 22.3% of the sample. The association between baseline data and time to discharge was stronger in patients with low handgrip strength (adjusted hazard ratio, low handgrip strength: 0.33; 95% confidence interval: 0.19-0.55), compared to undernourished patients evaluated by the other tools; Patient-Generated Subjective Global Assessment: (adjusted hazard ratio, severe undernutrition: 0.45; 95% confidence interval: 0.27-0.75) and Nutritional Risk Screening 2002: (adjusted hazard ratio, with nutritional risk: 0.55; 95% confidence interval: 0.37-0.80). An approximate 3-fold decrease in probability of discharge alive was observed in patients with low handgrip strength. Decreasing handgrip strength tertiles allowed to discriminate between patients who will have longer hospital stay, as well as undernutrition and nutritional risk assessed by Patient-Generated Subjective Global Assessment and Nutritional Risk Screening 2002. Copyright © 2013 Elsevier Ltd and European Society for Clinical Nutrition and Metabolism. All rights reserved.

Survival rates and worker compensation expenses in a national cohort of Mexican workers with permanent occupational disability caused by diabetes.

PubMed

Ascencio-Montiel, Iván de Jesús; Kumate-Rodríguez, Jesús; Borja-Aburto, Víctor Hugo; Fernández-Garate, José Esteban; Konik-Comonfort, Selene; Macías-Pérez, Oliver; Campos-Hernández, Ángel; Rodríguez-Vázquez, Héctor; López-Roldán, Verónica Miriam; Zitle-García, Edgar Jesús; Solís-Cruz, María Del Carmen; Velázquez-Ramírez, Ismael; Aguilar-Jiménez, Miriam; Villa-Caballero, Leonel; Cisneros-González, Nelly

2016-09-01

Permanent occupational disability is one of the most severe consequences of diabetes that impedes the performance of usual working activities among economically active individuals. Survival rates and worker compensation expenses have not previously been examined among Mexican workers. We aimed to describe the worker compensation expenses derived from pension payments and also to examine the survival rates and characteristics associated with all-cause mortality, in a cohort of 34,014 Mexican workers with permanent occupational disability caused by diabetes during the years 2000-2013 at the Mexican Institute of Social Security. A cross-sectional analysis study was conducted using national administrative records data from the entire country, regarding permanent occupational disability medical certification, pension payment and vital status. Survival rates were estimated using the Kaplan-Meier method. Multivariate Cox proportional hazard model was used to estimate adjusted hazard ratios (HR) and 95 % confidence intervals (95 % CI) in order to assess the cohort characteristics and all-cause mortality risk. Total expenses derived from pension payments for the period were accounted for in U.S. dollars (USD, 2013). There were 12,917 deaths in 142,725.1 person-years. Median survival time was 7.26 years. After multivariate adjusted analysis, males (HR, 1.39; 95 % CI, 1.29-1.50), agricultural, forestry, and fishery workers (HR, 1.41; 95 % CI, 1.15-1.73) and renal complications (HR, 3.49; 95 % CI, 3.18-3.83) had the highest association with all-cause mortality. The all-period expenses derived from pension payments amounted to $777.78 million USD (2013), and showed a sustained increment: from $58.28 million USD in 2000 to $111.62 million USD in 2013 (percentage increase of 91.5 %). Mexican workers with permanent occupational disability caused by diabetes had a median survival of 7.26 years, and those with renal complications showed the lowest survival in the cohort. Expenses derived from pension payments amounted to $ 777 million USD and showed an important increase from 2000 to 2013.

Population Muscle Strength Predicts Olympic Medal Tallies: Evidence from 20 Countries in the PURE Prospective Cohort Study

PubMed Central

Leong, Darryl P.; McKee, Martin; Yusuf, Salim

2017-01-01

Background National sporting achievement at the Olympic Games is important for national pride and prestige, and to promote participation in sport. Summer Olympic Games medal tallies have been associated with national wealth, and also social development and healthcare expenditure. It is uncertain however, how these socioeconomic factors translate into Olympic success. The objective of this study was therefore to examine the relationship between population muscle strength and Olympic medal tallies. Methods and Results This study of handgrip strength represents a cross-sectional analysis of the Prospective Urban Rural Epidemiology (PURE) study, which is an ongoing population cohort study of individuals from high-, middle-, and low-income countries. Within participating countries, households from both urban and rural communities were invited to participate using a sampling strategy intended to yield a sample that was representative of the community. Households were eligible if at least one member was aged 35–70 years and if they intended living at the same address for a further four years. A total of 152,610 participants from these households, located in 21 countries, were included in this analysis. Handgrip strength was measured using a Jamar dynanometer. Olympic medal tallies were made over the five most recent Summer Games. There was a significant positive association between national population grip strength (GS) and medal tally that persisted after adjustment for sex, age, height, average daily caloric intake and GDP (total and per capita). For every 1kg increase in population GS, the medal tally increased by 36% (95% CI 13–65%, p = 0.001) after adjustment. Among countries that won at least one medal over the four most recent Summer Olympic Games, there was a close linear relationship between adjusted GS and the natural logarithm of the per capita medal tally (adjusted r = 0.74, p = 0.002). Conclusions Population muscle strength may be an important determinant of Summer Olympic Games medal success. Further research is needed to understand whether population muscle strength is modifiable, and whether this can improve Olympic medal success. Extreme outcomes may reflect the average attributes of the population from which the individual experiencing the extreme outcome is drawn. PMID:28107362

Positive Adjustment in Parents Rearing Children with Down Syndrome.

ERIC Educational Resources Information Center

Flaherty, Evelyn M.; Glidden, Laraine Masters

2000-01-01

Compared adjustment in adoptive and biological parents rearing 1- to 12-year-olds with Down syndrome. Found that birth mothers and fathers were functioning quite similarly to adoptive mothers and fathers on family strengths, marital adjustment, and resources and stress. Birth mothers displayed higher personal burden than adoptive mothers, with the…

Mobility and muscle strength in male former elite endurance and power athletes aged 66-91 years.

PubMed

Manderoos, S; Wasenius, N; Laine, M K; Kujala, U M; Mälkiä, E; Kaprio, J; Sarna, S; Bäckmand, H M; Kettunen, J A; Heinonen, O J; Jula, A M; Aunola, S; Eriksson, J G

2017-11-01

The aim of this cross-sectional study was to compare mobility and muscle strength in male former elite endurance and power athletes aged 66-91 years (n = 150; 50 men in both former elite athlete groups and in their control group). Agility, dynamic balance, walking speed, chair stand, self-rated balance confidence (ABC-scale), jumping height, and handgrip strength were assessed. Former elite power athletes had better agility performance time than the controls (age- and body mass index, BMI-adjusted mean difference -3.6 s; 95% CI -6.3, -0.8). Adjustment for current leisure time physical activity (LTPA) and prevalence of diseases made this difference non-significant (P = 0.214). The subjects in the power sports group jumped higher than the men in the control group (age- and BMI-adjusted mean differences for vertical squat jump, VSJ 4.4 cm; 95% CI 2.0, 6.8; for countermovement jump, CMJ 4.0 cm; 95% CI 1.7, 6.4). Taking current LTPA and chronic diseases for adjusting process did not improve explorative power of the model. No significant differences between the groups were found in the performances evaluating dynamic balance, walking speed, chair stand, ABC-scale, or handgrip strength. In conclusion, power athletes among the aged former elite sportsmen had greater explosive force production in their lower extremities than the men in the control group. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Skeletal muscle mass adjusted by height correlated better with muscular functions than that adjusted by body weight in defining sarcopenia.

PubMed

Han, Der-Sheng; Chang, Ke-Vin; Li, Chia-Ming; Lin, Yu-Hong; Kao, Tung-Wei; Tsai, Keh-Sung; Wang, Tyng-Grey; Yang, Wei-Shiung

2016-01-20

Sarcopenia, characterized by low muscle mass and function, results in frailty, comorbidities and mortality. However, its prevalence varies according to the different criteria used in its diagnosis. This cross-sectional study investigated the difference in the number of sarcopenia cases recorded by two different measurement methods of low muscle mass to determine which measurement was better. We recruited 878 (54.2% female) individuals aged over 65 years and obtained their body composition and functional parameters. Low muscle mass was defined as two standard deviations below either the mean height-adjusted (hSMI) or weight-adjusted (wSMI) muscle mass of a young reference group. The prevalence of sarcopenia was 6.7% vs. 0.4% (male/female) by hSMI, and 4.0% vs. 10.7% (male/female) by wSMI. The κ coefficients for these two criteria were 0.39 vs. 0.03 (male/female), and 0.17 in all subjects. Serum myostatin levels correlated positively with gait speed (r = 0.142, p = 0.007) after adjustment for gender. hSMI correlated with grip strength, cardiopulmonary endurance, leg endurance, gait speed, and flexibility. wSMI correlated with grip strength, leg endurance, gait speed, and flexibility. Since hSMI correlated more closely with grip strength and more muscular functions, we recommend hSMI in the diagnosis of low muscle mass.

Magnetic bearings for inertial energy storage

NASA Technical Reports Server (NTRS)

Rodriguez, G. Ernest; Eakin, Vickie

1987-01-01

Advanced flywheels utilizing high strength fibers must operate at high rotational speeds and as such must operate in vacuum to reduce windage losses. The utilization of magnetic bearings in the flywheels overcome lubrication and seal problems, resulting in an energy storage system offering potential improvements over conventional electrochemical energy storage. Magnetic bearings evolved in the 1950s from the simple application of permanent magnets positioned to exert repulsive forces to the present where permanent magnets and electromagnets have been combined to provide axial and radial suspension. Further development of magnetic suspension has led to the design of a shaftless flywheel system for aerospace application. Despite the lack of proof of concept, integrated magnetic suspension in inertial storage systems can provide significant performance improvements to warrant development and tests.

Superconductor Permanent Magnets for Advanced Propulsion Applications

NASA Astrophysics Data System (ADS)

Putman, Phil; Zhou, Yuxiang; Salama, Kamel; Robertson, Tony; Bond, Deborah D.

2005-02-01

Improved trapped fields of 17 T at 29 K and 11.2 T at 47 K have been reported for the melt-textured YBCO superconductor material. Such high field strengths give the possibility for producing superconductor permanent magnets (SCPM) for plasma-related space propulsion applications, such as the anti-matter trap, magnetohydrodynamic (MHD) propulsion and electrical power generation, and others that are under development or being studied. The SCPM could be beneficial in reducing the weight-to-power ratio for the associated delivery and containment systems needed for plasma interactions that are inherently imbedded in many of these propulsion systems. In this paper, a review of the superconductor literature is presented, followed by uses of the SCPM in high-performance space propulsion applications.

Laparoscopic Repair of Inguinal Hernia with Biomimetic Matrix

PubMed Central

2012-01-01

Background and Objectives: Materials utilized for the repair of hernias fall into 2 broad categories, synthetics and biologics. Each has its merits and drawbacks. The synthetics have a permanent, inherent strength but are associated with some incidence of chronic pain. The biologics rely on variable tissue regeneration to give strength to the repair, limiting their use to specific situations. However, thanks to their transient presence and tissue ingrowth, the biologics do not result in a significant incidence of chronic pain. We studied the use of a biomimetic (REVIVE, Biomerix Corporation, Fremont, CA) in this setting in an attempt to obviate the disadvantages of each material. Methods: Fourteen patients underwent laparoscopic repair by totally extraperitoneal and transabdominal preperitoneal techniques of 16 inguinal hernias. Follow-up was as long as 19 mo, and 8 patients were followed for > 12 mo. There were no recurrences and a 5% incidence of functionally insignificant discomfort. Results: REVIVE is shown in histology and in vivo to demonstrate regeneration and tissue ingrowth into the polycarbonate/polyuria matrix similar to that in the biologics rather than scarring or encapsulation. There were no recurrences, indicating its strength and resilience as a permanent repair similar to that in the synthetics. Conclusion: This is proof of the concept that a biomimetic may bridge the gap between the biologics and synthetics and may be able to be utilized on a regular basis with the benefits of both materials and without their drawbacks. PMID:23484565

8 CFR 245a.3 - Application for adjustment from temporary to permanent resident status.

Code of Federal Regulations, 2011 CFR

2011-01-01

... residence under section 245A of the Act shall be distributed by the Service to appropriate representatives... Service in verifying information necessary for proper adjudication may result in denial of the application... resident application. (3) The Service Center Director shall sua sponte reopen and reconsider without fee...

8 CFR 245a.3 - Application for adjustment from temporary to permanent resident status.

Code of Federal Regulations, 2010 CFR

2010-01-01

... residence under section 245A of the Act shall be distributed by the Service to appropriate representatives... Service in verifying information necessary for proper adjudication may result in denial of the application... resident application. (3) The Service Center Director shall sua sponte reopen and reconsider without fee...

8 CFR 245.4 - Documentary requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 8 Aliens and Nationality 1 2014-01-01 2014-01-01 false Documentary requirements. 245.4 Section 245.4 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS ADJUSTMENT OF STATUS TO THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 245.4 Documentary requirements. The provisions of part 211 of this chapter relating to the...

8 CFR 245.4 - Documentary requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 8 Aliens and Nationality 1 2011-01-01 2011-01-01 false Documentary requirements. 245.4 Section 245.4 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS ADJUSTMENT OF STATUS TO THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 245.4 Documentary requirements. The provisions of part 211 of this chapter relating to the...

8 CFR 245.4 - Documentary requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 8 Aliens and Nationality 1 2012-01-01 2012-01-01 false Documentary requirements. 245.4 Section 245.4 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS ADJUSTMENT OF STATUS TO THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 245.4 Documentary requirements. The provisions of part 211 of this chapter relating to the...

8 CFR 245.4 - Documentary requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Documentary requirements. 245.4 Section 245.4 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS ADJUSTMENT OF STATUS TO THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 245.4 Documentary requirements. The provisions of part 211 of this chapter relating to the...

8 CFR 245.4 - Documentary requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 8 Aliens and Nationality 1 2013-01-01 2013-01-01 false Documentary requirements. 245.4 Section 245.4 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS ADJUSTMENT OF STATUS TO THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 245.4 Documentary requirements. The provisions of part 211 of this chapter relating to the...

8 CFR 245.6 - Interview.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Interview. 245.6 Section 245.6 Aliens and... ADMITTED FOR PERMANENT RESIDENCE § 245.6 Interview. Each applicant for adjustment of status under this part shall be interviewed by an immigration officer. This interview may be waived in the case of a child...

8 CFR 245.5 - Medical examination.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 8 Aliens and Nationality 1 2012-01-01 2012-01-01 false Medical examination. 245.5 Section 245.5... THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 245.5 Medical examination. Pursuant to section 232(b) of the Act, an applicant for adjustment of status shall be required to have a medical examination by...

8 CFR 245.5 - Medical examination.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 8 Aliens and Nationality 1 2013-01-01 2013-01-01 false Medical examination. 245.5 Section 245.5... THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 245.5 Medical examination. Pursuant to section 232(b) of the Act, an applicant for adjustment of status shall be required to have a medical examination by...

8 CFR 245.5 - Medical examination.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 8 Aliens and Nationality 1 2014-01-01 2014-01-01 false Medical examination. 245.5 Section 245.5... THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 245.5 Medical examination. Pursuant to section 232(b) of the Act, an applicant for adjustment of status shall be required to have a medical examination by...

42 CFR 419.70 - Transitional adjustments to limit decline in payments.

Code of Federal Regulations, 2014 CFR

2014-10-01

... chapter. (3) Permanent treatment for cancer hospitals and children's hospitals. In the case of a hospital... by 6 percent of the pre-BBA amount. (d) Hold harmless provisions—(1) Temporary treatment for small... in § 412.105(b) of this chapter. (2) Temporary treatment for small rural hospitals on or after...

42 CFR 419.70 - Transitional adjustments to limit decline in payments.

Code of Federal Regulations, 2013 CFR

2013-10-01

... chapter. (3) Permanent treatment for cancer hospitals and children's hospitals. In the case of a hospital... by 6 percent of the pre-BBA amount. (d) Hold harmless provisions—(1) Temporary treatment for small... in § 412.105(b) of this chapter. (2) Temporary treatment for small rural hospitals on or after...

42 CFR 419.70 - Transitional adjustments to limit decline in payments.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Permanent treatment for cancer hospitals and children's hospitals. In the case of a hospital described in... by 6 percent of the pre-BBA amount. (d) Hold harmless provisions—(1) Temporary treatment for small... in § 412.105(b) of this chapter. (2) Temporary treatment for small rural hospitals on or after...

8 CFR 245.5 - Medical examination.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 8 Aliens and Nationality 1 2011-01-01 2011-01-01 false Medical examination. 245.5 Section 245.5... THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 245.5 Medical examination. Pursuant to section 232(b) of the Act, an applicant for adjustment of status shall be required to have a medical examination by...

8 CFR 245.5 - Medical examination.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Medical examination. 245.5 Section 245.5... THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 245.5 Medical examination. Pursuant to section 232(b) of the Act, an applicant for adjustment of status shall be required to have a medical examination by...

Moving to a New Town. A Relocation Guide.

ERIC Educational Resources Information Center

Rackliffe, Gary, Ed.; Pearson, Nancy, Ed.

Designed to help those who must consider relocating to secure employment, this relocation guide provides answers to a number of questions pertaining to moving, money management, and adjusting to a new community. Various aspects of deciding to move are covered, including reasons for moving, thinking of a move as permanent, feelings of homesickness,…

Advanced Plasma Propulsion

DTIC Science & Technology

2011-11-01

within these cusps where electrons collide with the ceramic insulator lining the channel. In the MIT design, the overall magnetic field strength...allow compression of the anode spring (Sp), which holds the anode insulator (AI) flush with the base core (1). The anode stem and anode (A) are...case Aluminum bulk material 3 Insulator Cone HP-BN St. Gobain/ Ferro- Ceramic Grinding Inc. M1-M3 Permanent

46 CFR 160.073-10 - Construction and performance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... in figure 160.073-10. The link must be formed from a single salt water corrosion-resistant wire. A loop at least 50 mm (2 in.) in diameter must be provided at each end of the wire. Each loop must be permanently secured. (b) The breaking strength of each link must be between: (1) 450 N (100 lb.) and 600 N...

46 CFR 160.073-10 - Construction and performance.

Code of Federal Regulations, 2011 CFR

2011-10-01

... in figure 160.073-10. The link must be formed from a single salt water corrosion-resistant wire. A loop at least 50 mm (2 in.) in diameter must be provided at each end of the wire. Each loop must be permanently secured. (b) The breaking strength of each link must be between: (1) 450 N (100 lb.) and 600 N...

46 CFR 160.073-10 - Construction and performance.

Code of Federal Regulations, 2013 CFR

2013-10-01

... in figure 160.073-10. The link must be formed from a single salt water corrosion-resistant wire. A loop at least 50 mm (2 in.) in diameter must be provided at each end of the wire. Each loop must be permanently secured. (b) The breaking strength of each link must be between: (1) 450 N (100 lb.) and 600 N...

46 CFR 160.073-10 - Construction and performance.

Code of Federal Regulations, 2012 CFR

2012-10-01

... in figure 160.073-10. The link must be formed from a single salt water corrosion-resistant wire. A loop at least 50 mm (2 in.) in diameter must be provided at each end of the wire. Each loop must be permanently secured. (b) The breaking strength of each link must be between: (1) 450 N (100 lb.) and 600 N...

46 CFR 160.073-10 - Construction and performance.

Code of Federal Regulations, 2014 CFR

2014-10-01

... in figure 160.073-10. The link must be formed from a single salt water corrosion-resistant wire. A loop at least 50 mm (2 in.) in diameter must be provided at each end of the wire. Each loop must be permanently secured. (b) The breaking strength of each link must be between: (1) 450 N (100 lb.) and 600 N...

In vitro evaluation of an adhesive monomer as a bonding agent for orthodontic brackets to primary teeth and nickel-chromium ion crowns.

PubMed

Ergas, R P; Hondrum, S O; Mathieu, G P; Koonce, J D

1995-01-01

The adhesive monomer, Clearfil New Bond, was used to enhance the bond strength between orthodontic brackets and primary molars, premolars, and NiCr crowns. Twenty specimens of each had this dental adhesive applied according to the manufacturer's instructions in addition to a chemically cured composite material. The remaining specimens (20 each) were bonded without the adhesive monomer. Shear bond strengths were determined using a universal testing machine. Fracture sites were examined to determine the type of bond failure. All bond strengths were significantly increased with the addition of Clearfil New Bond (P < or = 0.0001). The shear bond strength to NiCr crowns with the addition of the adhesive monomer was 7.76 kg. This is comparable to the shear bond strength observed for primary molars (8.66 kg) and premolars (8.65 kg) without adhesive monomer. The observed decrease in adhesive bond failures with the addition of Clearfil New Bond indicated a stronger shear bond strength between the tooth surface and the bracket base. Clearfil New Bond can significantly increase the shear bond strength of orthodontic brackets to both primary molars and premolars. Additionally, it was shown that orthodontic brackets can be successfully bonded to Ni-Cr crowns at strengths comparable to primary or permanent enamel.

Effect of DHEAS on skeletal muscle over the life span: the InCHIANTI study.

PubMed

Valenti, Giorgio; Denti, Licia; Maggio, Marcello; Ceda, GianPaolo; Volpato, Stefano; Bandinelli, Stefania; Ceresini, Graziano; Cappola, Anne; Guralnik, Jack M; Ferrucci, Luigi

2004-05-01

It has been suggested that the reduced production of dehydroepiandrosterone sulfate (DHEAS) may be partially responsible for the decline of muscle strength and mass that often occurs with aging. However, this hypothesis has been only tested in small series of normal volunteers, with little consideration for potential confounders. Using data from a representative sample of 558 men (20-95 years) we tested the hypothesis that circulating DHEAS is independently associated with muscle strength and mass. Data are from InCHIANTI, an epidemiological study conducted in the Chianti geographic area (Tuscany, Italy). DHEAS serum levels were related to lower extremity muscle strength assessed by hand-held dynamometry and calf muscle area estimated from quantitative computerized tomography. Confounders included age, anthropometrics, physical activity, smoking, energy and alcohol intake, albumin, lipids, interleukin-6, comorbidity, depressive symptoms, and disability in activities of daily living. In fully adjusted models predicting lower extremity muscle strength and calf muscle area, we found significant age*log DHEAS interactions, suggesting that the relationship between DHEAS levels and muscle parameters differs across the life span. In age-stratified models adjusted for confounders, serum DHEAS was an independent predictor of muscle strength (p <.02) and mass (p <.01), but only for men between 60 and 79 years of age. After adjusting these models for serum-free or bioavailable testosterone, results were unchanged. In men aged 60-79 years, circulating DHEAS is an independent correlate of muscle strength and calf muscle area. The possible causal role of declining DHEAS in age-related sarcopenia should be further explored in longitudinal studies.

Per meal dose and frequency of protein consumption is associated with lean mass and muscle performance.

PubMed

Loenneke, Jeremy P; Loprinzi, Paul D; Murphy, Caoileann H; Phillips, Stuart M

2016-12-01

It has been hypothesized that for older adults evenly distributing consumption of protein at 30-40 g per meal throughout the day may result in more favorable retention of lean mass and muscular strength. Such a thesis has not, to our knowledge, been tested outside of short-term studies or acute measures of muscle protein synthesis. To examine whether the number of times an individual consumed a minimum of 30 g of protein at a meal is associated with leg lean mass and knee extensor strength. Data from the 1999-2002 NHANES were used, with 1081 adults (50-85 y) constituting the analytic sample. A "multiple pass" 24-h dietary interview format was used to collect detailed information about the participants' dietary intake. Knee extensor strength was assessed objectively using the Kin Com MP dynamometer. Leg lean mass was estimated from whole-body dual-energy X-ray absorptiometry (DXA) scans. Participants with 1 vs. 0 (β adjusted  = 23.6, p = 0.002) and 2 vs. 0 (β adjusted  = 51.1, p = 0.001) meals of ≥30 g protein/meal had greater strength and leg lean mass (1 vs. 0, β adjusted  = 1160, p < 0.05 and 2 vs. 0, β adjusted  = 2389, p < 0.05). The association of protein frequency with leg lean mass and strength plateaued at ∼45 g protein/meal for those consuming 2 vs. 0 meals above the evaluated protein/meal threshold. However, for those with only 1 meal at or above the evaluated threshold, the response plateaued at 30 g/meal. Leg lean mass mediated the relationship between protein frequency and strength, with the proportion of the total effect mediated being 64%. We found that more frequent consumption of meals containing between 30 and 45 g protein/meal produced the greatest association with leg lean mass and strength. Thus, the consumption of 1-2 daily meals with protein content from 30 to 45 g may be an important strategy for increasing and/or maintaining lean body mass and muscle strength with aging. Copyright © 2016 Elsevier Ltd and European Society for Clinical Nutrition and Metabolism. All rights reserved.

Precarious employment and health: analysis of the Comprehensive National Survey in Japan.

PubMed

Tsurugano, Shinobu; Inoue, Mariko; Yano, Eiji

2012-01-01

Recent studies suggest that unstable employment contracts may affect the health of workers. Many Japanese workers working full time in ostensibly permanent positions actually operate within unstable and precarious employment conditions. We compared the health status of Japanese workers with precarious employment contracts with that of permanent workers using the 2007 Comprehensive Survey of Living Conditions of the People on Health and Welfare (n=205,994). We classified their employment status as 'permanent' vs. 'precarious' (part-time, dispatch, or contract/non-regular) and compared their health conditions. Among both sexes, precarious workers were more likely than permanent workers to have poor self-rated health or more subjective symptoms, with more workers in full-time employment suffering from serious psychological distress (SPD) and more female workers who smoke. Using logistic regression, we identified a positive association between precarious employment and SPD and current smoking among workers engaged in full-time employment after adjusting for age, marital status, and work-related conditions. This study demonstrates that precarious employment contracts are associated with poor self-rated health, psychological distress, and tobacco use, especially among people working full-time jobs. These results suggest that engagement in full-time work under unstable employment status impairs workers' health.

A cohort study of permanently reduced work ability in breast cancer patients.

PubMed

Hauglann, Beate; Benth, Jūratė Šaltytė; Fosså, Sophie D; Dahl, Alv A

2012-09-01

The aims of this cohort study were to explore various longitudinal aspects of employment and disability pension due to permanently reduced work ability among women with breast cancer and to investigate the impact of breast cancer on income. In a national register-based controlled cohort study from Norway, 1,548 women diagnosed with breast cancer (all stages) between 1992 and 1996 at the age 45-54 years and 1,548 cancer-free women matched for age, municipality and civil status were followed for up to 14 years. Medical data from the Cancer Registry of Norway were linked with longitudinal data on employment, social security benefits and socio-demography collected from other national official registries. Compared to cancer-free controls, breast cancer patients were significantly more likely to receive disability pension (hazard ratio (HR) 2.7, 95% CI 2.3-3.2) after adjustment for unmatched socio-demographic variables (education, income and children <18 years in the household). Adjusted HR in breast cancer stage I patients was 1.8 (95% CI 1.5-2.3) and 3.0 (95% CI 2.4-3.8) in stage II/III patients compared to controls. The risk increased with mastectomy compared to breast-conserving surgery (HR 1.5, 95% CI 1.2-1.9). At the end of the observation period, employment rates were higher in non-disabled patients than in non-disabled controls (82% vs. 77%, p = 0.008). Working breast cancer patients experienced a temporary negative effect on employment income. A considerable proportion of women with breast cancer will over time experience permanently reduced work ability and become disability pension holders. In case of reduced work ability in breast cancer survivors, medical personel caring for them should consider and discuss with them rehabilitation and workplace adjustment in order to prevent early disability pension.

Profile of vemurafenib-induced severe skin toxicities.

PubMed

Peuvrel, L; Quéreux, G; Saint-Jean, M; Brocard, A; Nguyen, J M; Khammari, A; Knol, A C; Varey, E; Dréno, B

2016-02-01

Vemurafenib, a BRAF inhibitor, is commonly associated with skin toxicity. The impact of severe forms is unknown. To determine the rate of permanent vemurafenib discontinuation due to grade 3-4 skin toxicity, features of these toxicities, their recurrence rate after a switch to dabrafenib and their impact on overall survival. Retrospective cohort study of 131 patients treated with vemurafenib for melanoma between November 2010 and December 2014. Data on skin toxicities, the need for vemurafenib adjustment and the impact of switching to dabrafenib were collected. Regarding survival analysis, a conditional landmark analysis was performed to correct lead-time bias. Among the 131 vemurafenib-treated patients, 26% developed grade 3-4 skin toxicity. Forty-four percent of them permanently discontinued their treatment, mainly due to rash and classic skin adverse reactions (Steven-Johnson syndrome, Drug Reaction with Eosinophilia and Systemic Symptoms). Conversely, photosensitivity and carcinomas rarely required treatment adjustment. Grade 3-4 rashes were associated with clinical or biological abnormalities in 94% of patients. Among the 10 patients who subsequently switched to dabrafenib, skin toxicity recurred only in one patient. Overall survival was significantly prolonged in case of severe skin toxicity emerging within the first 4 (P = 0.014) and 8 weeks (P = 0.038) on vemurafenib, with only a trend at 12 weeks (P = 0.052). Median overall survival was also prolonged in case of severe rash. In this study, vemurafenib was continued in 56% of patients with grade 3-4 skin toxicity, which was associated with prolonged overall survival when emerging within the first 4 and 8 weeks of treatment. While developing severe skin adverse reactions permanently contraindicates vemurafenib use, other rashes should lead to retreatment attempts with dose reduction. In case of recurrence, dabrafenib seems to be an interesting option. For other skin toxicities, including photosensitivity and cutaneous carcinoma, treatment adjustment is usually not needed. © 2015 European Academy of Dermatology and Venereology.

Handgrip strength is an independent predictor of functional outcome in hip-fracture women: a prospective study with 6-month follow-up.

PubMed

Di Monaco, Marco; Castiglioni, Carlotta; De Toma, Elena; Gardin, Luisa; Giordano, Silvia; Tappero, Rosa

2015-02-01

The objective of this study was to investigate the contribution of handgrip strength in predicting the functional outcome after hip fracture in women.We prospectively investigated white women (N = 193 of 207) who were consecutively admitted to a rehabilitation hospital after a hip fracture. We measured handgrip strength with a Jamar dynamometer (Lafayette Instrument Co, Lafayette, IN), on admission to rehabilitation. Ability to function in activities of daily living was assessed by the Barthel index both on discharge from rehabilitation and at a 6-month follow-up.We found significant correlations between handgrip strength measured before rehabilitation and Barthel index scores assessed both on discharge from rehabilitation (ρ = 0.52, P < 0.001) and after 6 months (ρ = 0.49, P < 0.001). Significant associations between handgrip strength and Barthel index scores persisted after adjustment for age, comorbidities, pressure ulcers, medications in use, concomitant infections, body mass index, hip-fracture type, and Barthel index scores assessed both preinjury and on admission to rehabilitation (P = 0.001). Further adjustments for both Barthel index scores and Timed Up-and-Go test assessed at rehabilitation ending did not erase the significant association between handgrip strength and the Barthel index scores at the 6-month evaluation (P = 0.007). To define successful rehabilitation, we categorized the Barthel index scores as either high (85 or higher) or low (<85). The adjusted odds ratio for 1 SD increase in grip strength was 1.73 (95% confidence interval [CI] 1.05-2.84, P = 0.032) for having a high Barthel index score at the end of inpatient rehabilitation and 2.24 (95% CI 1.06-5.18) for having a high Barthel index score at the 6-month follow-up.Handgrip strength assessed before rehabilitation independently predicted the functional outcome both after inpatient rehabilitation and at a 6-month follow-up in hip-fracture women.

Performance characterization of a permanent-magnet helicon plasma thruster

NASA Astrophysics Data System (ADS)

Takahashi, Kazunori; Charles, Christine; Boswell, Rod

2012-10-01

Helicon plasma thrusters operated at a few kWs of rf power is an active area of an international research. Recent experiments have clarified part of the thrust-generation mechanisms. Thrust components which have been identified include an electron pressure inside the source region and a Lorentz force due to an electron diamagnetic drift current and a radial component of the applied magnetic field. The use of permanent magnets (PMs) instead of solenoids is one of the solutions for improving the thruster efficiency because it does not require electricity for the magnetic nozzle formation. Here the thrust imparted from a permanent-magnet helicon plasma thruster is directly measured using a pendulum thrust balance. The source consists of permanent magnet (PM) arrays, a double turn rf loop antenna powered by a 13.56 MHz rf generator and a glass source tube. The PM arrays provide a magnetic nozzle near the open exit of the source and two configurations, which have maximum field strengths of about 100 and 270 G, are tested. A thrust of 15 mN, specific impulse of 2000 sec and a thrust efficiency of 8 percent are presently obtained for 2 kW of input power, 24 sccm flow rate of argon and the stronger magnetic field configuration.

Autapse-induced multiple stochastic resonances in a modular neuronal network

NASA Astrophysics Data System (ADS)

Yang, XiaoLi; Yu, YanHu; Sun, ZhongKui

2017-08-01

This study investigates the nontrivial effects of autapse on stochastic resonance in a modular neuronal network subjected to bounded noise. The resonance effect of autapse is detected by imposing a self-feedback loop with autaptic strength and autaptic time delay to each constituent neuron. Numerical simulations have demonstrated that bounded noise with the proper level of amplitude can induce stochastic resonance; moreover, the noise induced resonance dynamics can be significantly shaped by the autapse. In detail, for a specific range of autaptic strength, multiple stochastic resonances can be induced when the autaptic time delays are appropriately adjusted. These appropriately adjusted delays are detected to nearly approach integer multiples of the period of the external weak signal when the autaptic strength is very near zero; otherwise, they do not match the period of the external weak signal when the autaptic strength is slightly greater than zero. Surprisingly, in both cases, the differences between arbitrary two adjacent adjusted autaptic delays are always approximately equal to the period of the weak signal. The phenomenon of autaptic delay induced multiple stochastic resonances is further confirmed to be robust against the period of the external weak signal and the intramodule probability of subnetwork. These findings could have important implications for weak signal detection and information propagation in realistic neural systems.

Menopausal status and physical performance in middle aged women: a cross-sectional community-based study in Northeast Brazil.

PubMed

da Câmara, Saionara M A; Zunzunegui, Maria Victoria; Pirkle, Catherine; Moreira, Mayle A; Maciel, Álvaro C C

2015-01-01

To examine associations between menopausal status and physical performance in middle-aged women from the Northeast region of Brazil. Cross-sectional study of women between 40 to 65 years old living in Parnamirim. Women were recruited by advertisements in primary care neighborhood centers across the city. Physical performance was assessed by grip strength, gait speed and chair stands. Menopausal status was determined using the Stages of Reproductive Aging Workshop classification and women were classified in: premenopausal, perimenopausal or postmenopausal. Multiple linear regression analyses were performed to model the effect of menopausal status on each physical performance measure, adjusting for covariates (age, family income, education, body mass index, parity and age at first birth). The premenopausal women were significantly stronger and performed better in chair stands than perimenopausal and postmenopausal women. Gait speed did not vary significantly by menopausal status. In multivariate analyses, menopausal status remained statistically significant only for grip strength. In fully adjusted analyses, premenopausal women had grip strength mean of 2.226 Kgf (95% CI: 0.361 - 4.091) higher than the postmenopausal group. This study provides further evidence for the associations between menopause and physical performance in middle-aged women, since grip strength is weaker in peri and postmenopausal women compared to premenopausal, even adjusted for age and other covariates.

Development of an easy-debonding orthodontic adhesive using thermal heating.

PubMed

Tsuruoka, Takashi; Namura, Yasuhiro; Shimizu, Noriyoshi

2007-01-01

We produced experimentally a new bonding material that consisted of a mixture of a base resin (4-META/MMA-TBB resin adhesive) and thermoexpandable microcapsules for safe, easy debonding. Microcapsules in the base resin would start expansion at 80 degrees C, leading to a remarkable decrease in bond strength. Stainless steel brackets were bonded to bovine permanent mandibular incisors using bonding materials containing the microcapsules at different contents. After thermal cycling or heating, the shear bond strength of the brackets was measured. Shear bond strength of the bonding materials containing 30-40 wt% microcapsules decreased to about one-third or one-fifth that of the base resin on heating. Heating the brackets for eight seconds increased the temperature in the pulp chamber by 2 degrees C, which should not induce pulp damage. Results obtained suggested that the new bonding material should prove useful for removing brackets easily at the time of bracket debonding without any pain or enamel cracks, while maintaining the bonding strength during active orthodontic treatment.

Bearing Strengths of Some Wrought-aluminum Alloys

NASA Technical Reports Server (NTRS)

Moore, R L; Wescoat, C

1943-01-01

Although a number of investigations of the bearing strength of aluminum alloys have been made, the problem remains one of considerable interest to the aircraft industry. For this reason it has seemed advisable to make additional tests of the commonly used aircraft alloys in an effort to establish a better basis for the selection of allowable bearing values. Current design practice does not recognize the effect of edge distance upon bearing strengths, and for this reason edge distance was one of the principal variables considered in this investigation. The increasing emphasis being placed upon permanent set limitations makes it essential that more information on bearing yield phenomena be obtained. The object of this investigation was to determine bearing yield and ultimate strengths of the following aluminum alloy products: 17S-T, 24S-T, Alclad 24S-T, 24S-RT, 52S-0, 52S-1/2H, 52S-H, 53S-T, and 61S-T extrusions. Ratios of these bearing properties to tensile properties were also determined.

Magnetic superelevation design of Halbach permanent magnet guideway for high-temperature superconducting maglev

NASA Astrophysics Data System (ADS)

Lei, Wuyang; Qian, Nan; Zheng, Jun; Huang, Huan; Zhang, Ya; Deng, Zigang

2017-07-01

To improve the curve negotiating ability of high-temperature superconducting (HTS) maglev system, a special structure of magnetic superelevation for double-pole Halbach permanent magnet guideway (PMG) was designed. The most significant feature of this design is the asymmetrical PMG that forms a slanting magnetic field without affecting the smoothness of the PMG surface. When HTS maglev vehicle runs through curves with magnetic superelevation, the vehicle will slant due to asymmetry in magnetic field and the flux-pinning effect of onboard HTS bulks. At the same time, one component of the levitation force provides a part of the centripetal force that reduces lateral acceleration of the vehicle and thus enhances its curve negotiating ability. Furthermore, the slant angle of magnetic superelevation can be adjusted by changing the materials and the thickness of the added permanent magnets. This magnetic superelevation method, together with orographic uplift, can be applied to different requirements of PMG designs. Besides, the applicability of this method would benefit future development of high-speed HTS maglev system.

Forging Peace Through Strength in Ukraine and the Transatlantic Alliance Act

THOMAS, 113th Congress

Rep. Turner, Michael R. [R-OH-10

2014-04-09

House - 04/09/2014 Referred to the Committee on Foreign Affairs, and in addition to the Committees on Armed Services, and Intelligence (Permanent Select), for a period to be subsequently determined by the Speaker, in each case for consideration of such provisions as fall within the... (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Splicing Wires Permanently With Explosives

NASA Technical Reports Server (NTRS)

Bement, Laurence J.; Kushnick, Anne C.

1990-01-01

Explosive joining process developed to splice wires by enclosing and metallurgically bonding wires within copper sheets. Joints exhibit many desirable characteristics, 100-percent conductivity and strength, no heat-induced annealing, no susceptibility to corrosion in contacts between dissimilar metals, and stability at high temperature. Used to join wires to terminals, as well as to splice wires. Applicable to telecommunications industry, in which millions of small wires spliced annually.

8 CFR 1245.22 - Evidence to demonstrate an alien's physical presence in the United States on a specific date.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Evidence to demonstrate an alien's physical... OFFICE FOR IMMIGRATION REVIEW, DEPARTMENT OF JUSTICE IMMIGRATION REGULATIONS ADJUSTMENT OF STATUS TO THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 1245.22 Evidence to demonstrate an alien's physical...

Reading Refugee Stories: Five Common Themes among Picture Books with Refugee Characters

ERIC Educational Resources Information Center

Nath, Lopita; Grote-Garcia, Stephanie

2017-01-01

The U.S. Refugee Resettlement Program offers a quick path to permanent residency and adjustment to the United States, with the major objectives of economic success, community involvement, and local integration. The success of the program partly depends on the response of the American community towards refugees. Using the foundational idea that…

Influence of dentin pretreatment on bond strength of universal adhesives.

PubMed

Poggio, Claudio; Beltrami, Riccardo; Colombo, Marco; Chiesa, Marco; Scribante, Andrea

2017-01-01

Objective: The purpose of the present study was to compare bond strength of different universal adhesives under three different testing conditions: when no pretreatment was applied, after 37% phosphoric acid etching and after glycine application. Materials and methods: One hundred and fifty bovine permanent mandibular incisors were used as a substitute for human teeth. Five different universal adhesives were tested: Futurabond M+, Scotchbond Universal, Clearfil Universal Bond, G-Premio BOND, Peak Universal Bond. The adhesive systems were applied following each manufacturer's instructions. The teeth were randomly assigned to three different dentin surface pretreatments: no pretreatment agent (control), 37% phosphoric acid etching, glycine pretreatment. The specimens were placed in a universal testing machine in order to measure and compare bond strength values. Results: The Kruskal-Wallis analysis of variance and the Mann-Whitney test were applied to assess significant differences among the groups. Dentin pretreatments provided different bond strength values for the adhesives tested, while similar values were registered in groups without dentin pretreatment. Conclusions: In the present report, dentin surface pretreatment did not provide significant differences in shear bond strength values of almost all groups. Acid pretreatment lowered bond strength values of Futurabond and Peak Universal Adhesives, whereas glycine pretreatment increased bond strength values of G Praemio Bond adhesive system.

Influence of dentin pretreatment on bond strength of universal adhesives

PubMed Central

Poggio, Claudio; Beltrami, Riccardo; Colombo, Marco; Chiesa, Marco; Scribante, Andrea

2017-01-01

Abstract Objective: The purpose of the present study was to compare bond strength of different universal adhesives under three different testing conditions: when no pretreatment was applied, after 37% phosphoric acid etching and after glycine application. Materials and methods: One hundred and fifty bovine permanent mandibular incisors were used as a substitute for human teeth. Five different universal adhesives were tested: Futurabond M+, Scotchbond Universal, Clearfil Universal Bond, G-Premio BOND, Peak Universal Bond. The adhesive systems were applied following each manufacturer’s instructions. The teeth were randomly assigned to three different dentin surface pretreatments: no pretreatment agent (control), 37% phosphoric acid etching, glycine pretreatment. The specimens were placed in a universal testing machine in order to measure and compare bond strength values. Results: The Kruskal–Wallis analysis of variance and the Mann–Whitney test were applied to assess significant differences among the groups. Dentin pretreatments provided different bond strength values for the adhesives tested, while similar values were registered in groups without dentin pretreatment. Conclusions: In the present report, dentin surface pretreatment did not provide significant differences in shear bond strength values of almost all groups. Acid pretreatment lowered bond strength values of Futurabond and Peak Universal Adhesives, whereas glycine pretreatment increased bond strength values of G Praemio Bond adhesive system. PMID:28642929

Promoting balance and strength in the middle-aged workforce.

PubMed

Granacher, U; Wick, C; Rueck, N; Esposito, C; Roth, R; Zahner, L

2011-01-01

The prevalence of sustaining fall-related injuries is high in the middle-aged workforce. Deficits in postural control/muscle strength represent important fall-risk factors. The objective of this study was to examine the impact of balance and strength training followed by detraining on postural control and muscle strength in the workforce. Thirty-two adults with sedentary office work participated in this study and were assigned to an intervention (age 56.0 ± 3.7 yrs) or a control group (age 55.5 ± 3.4 yrs). The intervention group participated in 8 weeks of balance and strength training conducted at the worksite, followed by 8 weeks of detraining. Tests included the measurement of (a) total centre of pressure (COP) displacements during one-legged standing, (b) gait velocity and stride-to-stride variability, (c) peak isometric/isokinetic torque and rate of torque development (RTD) of the plantar flexors, and (d) jumping height. After training, significant improvements in COP displacements, gait velocity, peak isometric/isokinetic torque, RTD, and jumping height were observed. During detraining, muscle strength deteriorated, whereas postural control improved. This fall-preventive training program conducted at the worksite proved to be feasible and effective. It is suggested that this training program should be permanently conducted to maintain/improve muscle strength. © Georg Thieme Verlag KG Stuttgart · New York.

Insulin resistance and muscle strength in older persons.

PubMed

Abbatecola, Angela M; Ferrucci, Luigi; Ceda, Gianpaolo; Russo, Cosimo R; Lauretani, Fulvio; Bandinelli, Stefania; Barbieri, Michelangela; Valenti, Giorgio; Paolisso, Giuseppe

2005-10-01

The functional consequences of an age-related insulin resistance (IR) state on muscle functioning are unknown. Because insulin is needed for adequate muscle function, an age-related insulin-resistant state may also be a determining factor. We evaluated the relationship between IR and handgrip muscle strength in men and women from a large population-based study (n = 968). The degree of IR was evaluated by the homeostasis model assessment (HOMA) and muscle strength was assessed using handgrip. Simple sex-stratified correlations demonstrated that, in men, body mass index-adjusted handgrip strength correlated positively with physical activity (r = 0.321; p < .001), muscle area (r = 0.420; p < .001), muscle density (r = 0.263; p = .001), plasma albumin (r = 0.156; p = .001), insulin-like growth factor-1 (r = 0.258; p < .001), calcium (r = 0.140; p = .006), and testosterone (r = 0.325; p < .001) concentrations, whereas a negative association was found for age (r = -0.659; p < .001) and myoglobin plasma levels (r = -0.164; p =.001). In women, body mass index-adjusted handgrip strength correlated positively with physical activity (r = 0.280; p < .001), muscle area (r = 0.306; p < .001), muscle density (r = 0.341; p = .001), plasma albumin (r = 0.140; p =.001), and insulin-like growth factor-1 (r = 0.300; p < .001), whereas a negative association was found for age (r = -0.563; p < .001), myoglobin levels (r = -0.164; p = .001), and IR (r = -0.130; p = .04). Sex-stratified analyses adjusted for multiple confounders showed that the relationship between IR and handgrip strength was found significant in women, whereas it was negligible and not significant in men.

[Strengths and difficulties in emotional adjustment of Aymara children from the perspective of children, parents and teachers].

PubMed

Caqueo, A; Urzúa, A; Ferrer, R; Zúñiga, F; Palma, C; Escudero, J

2014-10-01

To describe capabilities and difficulties in emotional adjustment experienced by children living in the Chilean Aymara city of Arica. 610 students between 5th and 8th grade, in addition to their parents and teachers were surveyed using the Strengths and Difficulties Questionnaire (SDQ), comparing Aymara children to those without indigenous heritage. 25 items divided into five scales were evaluated: Emotional, behavioral problems, hyperactivity, relationship problems with peers and prosocial behaviors, classifying the respondents into three levels, Normal, Border and Abnormal. There were no significant differences among the groups studied, where discrepancies in almost all cases show a slight effect (d≥|0.2|). Also, no relevant effects were observed regarding the type of assessor on the assessment of each dimension. Despite this, it was observed that Aymara children showed lower scores than their peers in "behavioral problems" according to their teachers, but this difference was also mild (partial η2>0.01). Aymara Children showed similar strengths and difficulties than non-Aymara students in situations that require emotional adjustment.

Effect of axial magnetic field on a 2.45 GHz permanent magnet ECR ion source.

PubMed

Nakamura, T; Wada, H; Asaji, T; Furuse, M

2016-02-01

Herein, we conduct a fundamental study to improve the generation efficiency of a multi-charged ion source using argon. A magnetic field of our electron cyclotron resonance ion source is composed of a permanent magnet and a solenoid coil. Thereby, the axial magnetic field in the chamber can be tuned. Using the solenoid coil, we varied the magnetic field strength in the plasma chamber and measured the ion beam current extracted at the electrode. We observed an approximately three times increase in the Ar(4+) ion beam current when the magnetic field on the extractor-electrode side of the chamber was weakened. From our results, we can confirm that the multi-charged ion beam current changes depending on magnetic field intensity in the plasma chamber.

Association between Race, Household Income and Grip Strength in Middle- and Older-Aged Adults.

PubMed

Thorpe, Roland J Jr; Simonsick, Eleanor; Zonderman, Alan; Evans, Michelle K

2016-10-20

Poor grip strength is an indicator of frailty and a precursor to functional limitations. Although poor grip strength is more prevalent in older disabled African American women, little is known about the association between race and poverty-related disparities and grip strength in middle-aged men and women. We examined the cross-sectional relationship between race, socioeconomic status as assessed by household income, and hand grip strength in men and women in the Healthy Aging in Neighborhoods of Diversity across the Life Span study. General linear models examined grip strength (maximum of two trials on both sides) by race and household income adjusted for age, weight, height, hand pain, education, insurance status, family income, and two or more chronic conditions. Of 2,091 adults, 422(45.4%) were male, 509(54.8%) were African American, and 320 (34.5%) were living in households with incomes below 125% of the federal poverty level (low SES). In adjusted models, African American women had greater grip strength than White women independent of SES (low income household: 29.3 vs 26.9 kg and high income household: 30.5 vs. 28.3kg; P<.05 for both); whereas in men, only African Americans in the high income household group had better grip strength than Whites (46.3 vs. 43.2; P<.05). The relationship between grip strength, race and SES as assessed by household income varied in this cohort. Efforts to develop grip strength norms and cut points that indicate frailty and sarcopenia may need to be race- and income-specific.

Moving backwards, moving forward: the experiences of older Filipino migrants adjusting to life in New Zealand.

PubMed

Montayre, Jed; Neville, Stephen; Holroyd, Eleanor

2017-12-01

To explore the experiences of older Filipino migrants adjusting to living permanently in New Zealand. The qualitative descriptive approach taken in this study involved 17 individual face-to-face interviews of older Filipino migrants in New Zealand. Three main themes emerged from the data. The first theme was "moving backwards and moving forward", which described how these older Filipino migrants adjusted to challenges they experienced with migration. The second theme was "engaging with health services" and presented challenges relating to the New Zealand healthcare system, including a lack of knowledge of the nature of health services, language barriers, and differences in cultural views. The third theme, "new-found home", highlighted establishing a Filipino identity in New Zealand and adjusting to the challenges of relocation. Adjustment to life in New Zealand for these older Filipino migrants meant starting over again by building new values through learning the basics and then moving forward from there.

Moving backwards, moving forward: the experiences of older Filipino migrants adjusting to life in New Zealand

PubMed Central

Montayre, Jed; Neville, Stephen; Holroyd, Eleanor

2017-01-01

ABSTRACT Purpose: To explore the experiences of older Filipino migrants adjusting to living permanently in New Zealand. Method: The qualitative descriptive approach taken in this study involved 17 individual face-to-face interviews of older Filipino migrants in New Zealand. Results: Three main themes emerged from the data. The first theme was “moving backwards and moving forward”, which described how these older Filipino migrants adjusted to challenges they experienced with migration. The second theme was “engaging with health services” and presented challenges relating to the New Zealand healthcare system, including a lack of knowledge of the nature of health services, language barriers, and differences in cultural views. The third theme, “new-found home”, highlighted establishing a Filipino identity in New Zealand and adjusting to the challenges of relocation. Conclusion: Adjustment to life in New Zealand for these older Filipino migrants meant starting over again by building new values through learning the basics and then moving forward from there. PMID:28705087

Elementary quantum mechanics of the neutron with an electric dipole moment

PubMed Central

Baym, Gordon; Beck, D. H.

2016-01-01

The neutron, in addition to possibly having a permanent electric dipole moment as a consequence of violation of time-reversal invariance, develops an induced electric dipole moment in the presence of an external electric field. We present here a unified nonrelativistic description of these two phenomena, in which the dipole moment operator, D→, is not constrained to lie along the spin operator. Although the expectation value of D→ in the neutron is less than 10−13 of the neutron radius, rn, the expectation value of D→ 2 is of order rn2. We determine the spin motion in external electric and magnetic fields, as used in past and future searches for a permanent dipole moment, and show that the neutron electric polarizability, although entering the neutron energy in an external electric field, does not affect the spin motion. In a simple nonrelativistic model we show that the expectation value of the permanent dipole is, to lowest order, proportional to the product of the time-reversal-violating coupling strength and the electric polarizability of the neutron. PMID:27325765

Elementary quantum mechanics of the neutron with an electric dipole moment.

PubMed

Baym, Gordon; Beck, D H

2016-07-05

The neutron, in addition to possibly having a permanent electric dipole moment as a consequence of violation of time-reversal invariance, develops an induced electric dipole moment in the presence of an external electric field. We present here a unified nonrelativistic description of these two phenomena, in which the dipole moment operator, [Formula: see text], is not constrained to lie along the spin operator. Although the expectation value of [Formula: see text] in the neutron is less than [Formula: see text] of the neutron radius, [Formula: see text], the expectation value of [Formula: see text] is of order [Formula: see text] We determine the spin motion in external electric and magnetic fields, as used in past and future searches for a permanent dipole moment, and show that the neutron electric polarizability, although entering the neutron energy in an external electric field, does not affect the spin motion. In a simple nonrelativistic model we show that the expectation value of the permanent dipole is, to lowest order, proportional to the product of the time-reversal-violating coupling strength and the electric polarizability of the neutron.

Housing first on a large scale: Fidelity strengths and challenges in the VA's HUD-VASH program.

PubMed

Kertesz, Stefan G; Austin, Erika L; Holmes, Sally K; DeRussy, Aerin J; Van Deusen Lukas, Carol; Pollio, David E

2017-05-01

Housing First (HF) combines permanent supportive housing and supportive services for homeless individuals and removes traditional treatment-related preconditions for housing entry. There has been little research describing strengths and shortfalls of HF implementation outside of research demonstration projects. The U.S. Department of Veterans Affairs (VA) has transitioned to an HF approach in a supportive housing program serving over 85,000 persons. This offers a naturalistic window to study fidelity when HF is adopted on a large scale. We operationalized HF into 20 criteria grouped into 5 domains. We assessed 8 VA medical centers twice (1 year apart), scoring each criterion using a scale ranging from 1 ( low fidelity ) to 4 ( high fidelity ). There were 2 HF domains (no preconditions and rapidly offering permanent housing) for which high fidelity was readily attained. There was uneven progress in prioritizing the most vulnerable clients for housing support. Two HF domains (sufficient supportive services and a modern recovery philosophy) had considerably lower fidelity. Interviews suggested that operational issues such as shortfalls in staffing and training likely hindered performance in these 2 domains. In this ambitious national HF program, the largest to date, we found substantial fidelity in focusing on permanent housing and removal of preconditions to housing entry. Areas of concern included the adequacy of supportive services and adequacy in deployment of a modern recovery philosophy. Under real-world conditions, large-scale implementation of HF is likely to require significant additional investment in client service supports to assure that results are concordant with those found in research studies. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Adjustable Optical-Fiber Attenuator

NASA Technical Reports Server (NTRS)

Buzzetti, Mike F.

1994-01-01

Adjustable fiber-optic attenuator utilizes bending loss to reduce strength of light transmitted along it. Attenuator functions without introducing measurable back-reflection or insertion loss. Relatively insensitive to vibration and changes in temperature. Potential applications include cable television, telephone networks, other signal-distribution networks, and laboratory instrumentation.

High Strength and Wear Resistant Aluminum Alloy for High Temperature Applications

NASA Technical Reports Server (NTRS)

Lee, Jonathan A.; Chen, Po Shou

2003-01-01

Originally developed by NASA as high performance piston alloys to meet U.S. automotive legislation requiring low exhaust emission, the novel NASA alloys now offer dramatic increase in tensile strength for many other applications at elevated temperatures from 450 F (232 C) to about 750 F (400 C). It is an ideal low cost material for cast automotive components such as pistons, cylinder heads, cylinder liners, connecting rods, turbo chargers, impellers, actuators, brake calipers and rotors. It can be very economically produced from conventional permanent mold, sand casting or investment casting, with silicon content ranging from 6% to 18%. At high silicon levels, the alloy exhibits excellent thermal growth stability, surface hardness and wear resistant properties.

Antimicrobial activity and properties of irreversible hydrocolloid impression materials incorporated with silver nanoparticles.

PubMed

Ginjupalli, Kishore; Alla, Rama Krishna; Tellapragada, Chaitanya; Gupta, Lokendra; Upadhya Perampalli, Nagaraja

2016-06-01

Conventional spray and the immersion disinfection of irreversible hydrocolloid impression materials may lead to dimensional changes. The purpose of this in vitro study was to investigate the antimicrobial activity and properties of irreversible hydrocolloid impression materials incorporated with silver nanoparticles. The antimicrobial activity and properties of 2 commercially available irreversible hydrocolloid impression materials were evaluated after incorporating varying concentrations of silver nanoparticles. Antimicrobial activity was determined using the disk diffusion method. The gel strength, permanent deformation, flow, and gelation time were measured according to American Dental Association specification #18. Analysis of variance was used to identify the significant differences within and across the groups (α=.05). Adding silver nanoparticles to irreversible hydrocolloid impression materials resulted in superior antimicrobial activity without adversely affecting their properties. Adding silver nanoparticles to Zelgan significantly increased the gel strength compared with the control group, except at 5 wt%. However, the gel strength of Tropicalgin was unaffected except at 5 wt%. An increase in the permanent deformation was found with the incorporation of silver nanoparticles in both Zelgan and Tropicalgin. The flow of Zelgan increased with the incorporation of silver nanoparticles, whereas a decrease in the flow of Tropicalgin was observed at 1 wt% and 2 wt%. An increase in the gelation time of both Zelgan and Tropicalgin was observed with the incorporation of silver nanoparticles. Based on this in vitro study, silver nanoparticles can be incorporated into irreversible hydrocolloid impression materials as antimicrobial agents without adversely affecting their properties. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Quadriceps strength, quadriceps power, and gait speed in older U.S. adults with diabetes mellitus: results from the National Health and Nutrition Examination Survey, 1999-2002.

PubMed

Kalyani, Rita Rastogi; Tra, Yolande; Yeh, Hsin-Chieh; Egan, Josephine M; Ferrucci, Luigi; Brancati, Frederick L

2013-05-01

To examine the independent association between diabetes mellitus (and its duration and severity) and quadriceps strength, quadriceps power, and gait speed in a national population of older adults. Cross-sectional nationally representative survey. United States. Two thousand five hundred seventy-three adults aged 50 and older in the National Health and Nutrition Examination Survey 1999-2002 who had assessment of quadriceps strength. Diabetes mellitus was ascertained according to questionnaire. Measurement of isokinetic knee extensor (quadriceps) strength was performed at 60º/s. Gait speed was assessed using a 20-foot walk test. Multiple linear regression analyses were used to assess the association between diabetes mellitus status and outcomes, adjusting for potential confounders or mediators. Older U.S. adults with diabetes mellitus had significantly slower gait speed (0.96 ± 0.02 m/s) than those without (1.08 ± 0.01 m/s; P < .001). After adjusting for demographic characteristics, weight, and height, diabetes mellitus was also associated with significantly lower quadriceps strength (-4.6 ± 1.9 Nm; P = .02) and power (-4.9 ± 2.0 W; P = .02) and slower gait speed (-0.05 ± 0.02 m/s; P = .002). Associations remained significant after adjusting for physical activity and C-reactive protein. After accounting for comorbidities (cardiovascular disease, peripheral neuropathy, amputation, cancer, arthritis, fracture, chronic obstructive pulmonary disease), diabetes mellitus was independently associated only with gait speed (-0.04 ± 0.02 m/s; P = .02). Diabetes mellitus duration in men and women was negatively associated with age-adjusted quadriceps strength (-5.7 and -3.5 Nm/decade of diabetes mellitus, respectively) and power (-6.1 and -3.8 W/decade of diabetes mellitus, respectively) (all P ≤ .001, no significant interactions according to sex). Glycosylated hemoglobin was not associated with outcomes after accounting for body weight. Older U.S. adults with diabetes mellitus have lower quadriceps strength and quadriceps power that is related to the presence of comorbidities and walk slower than those without diabetes mellitus. Future studies should investigate the relationship between hyperglycemia and subsequent declines in leg muscle function. © 2013, Copyright the Authors Journal compilation © 2013, The American Geriatrics Society.

Later Age at Onset of Independent Walking Is Associated With Lower Bone Strength at Fracture-Prone Sites in Older Men.

PubMed

Ireland, Alex; Muthuri, Stella; Rittweger, Joern; Adams, Judith E; Ward, Kate A; Kuh, Diana; Cooper, Rachel

2017-06-01

Later age at onset of independent walking is associated with lower leg bone strength in childhood and adolescence. However, it is unknown whether these associations persist into older age or whether they are evident at axial (central) or upper limb sites. Therefore, we examined walking age obtained at age 2 years and bone outcomes obtained by dual-energy X-ray absorptiometry (DXA) and peripheral quantitative computed tomography (pQCT) scans at ages 60 to 64 years in a nationally representative cohort study of British people, the MRC National Survey of Health and Development. It was hypothesized that later walking age would be associated with lower bone strength at all sites. Later independent walking age was associated with lower height-adjusted hip (standardized regression coefficients with 95% confidence interval [CI] -0.179 [-0.251 to -0.107]), spine (-0.157 [-0.232 to -0.082]), and distal radius (-0.159 [-0.245 to -0.073]) bone mineral content (BMC, indicating bone compressive strength) in men (all p < 0.001). Adjustment for covariates partially attenuated these associations, primarily because of lower lean mass and adolescent sporting ability in later walkers. These associations were also evident for a number of hip geometric parameters (including cross-sectional moment of inertia [CSMI], indicating bone bending/torsional strength) assessed by hip structural analysis (HSA) from DXA scans. Similar height-adjusted associations were also observed in women for several hip, spine, and upper limb outcomes, although adjustment for fat or lean mass led to complete attenuation for most outcomes, with the exception of femoral shaft CSMI and spine bone area (BA). In conclusion, later independent walking age appears to have a lifelong association with bone strength across multiple skeletal sites in men. These effects may result from direct effects of early life loading on bone growth and mediation by adult body composition. Results suggest that late walking age may represent a novel risk factor for subsequent low bone strength. Existing interventions effective in hastening walking age may have positive effects on bone across life. © 2017 The Authors. Journal of Bone and Mineral Research Published by Wiley Periodicals Inc. © 2017 The Authors. Journal of Bone and Mineral Research Published by Wiley Periodicals Inc.

Development of a compact permanent magnet helicon plasma source for ion beam bioengineering.

PubMed

Kerdtongmee, P; Srinoum, D; Nisoa, M

2011-10-01

A compact helicon plasma source was developed as a millimeter-sized ion source for ion beam bioengineering. By employing a stacked arrangement of annular-shaped permanent magnets, a uniform axial magnetic flux density up to 2.8 kG was obtained. A cost effective 118 MHz RF generator was built for adjusting forward output power from 0 to 40 W. The load impedance and matching network were then analyzed. A single loop antenna and circuit matching elements were placed on a compact printed circuit board for 50 Ω impedance matching. A plasma density up to 1.1 × 10(12) cm(-3) in the 10 mm diameter tube under the magnetic flux density was achieved with 35 W applied RF power.

Development of a compact permanent magnet helicon plasma source for ion beam bioengineering

NASA Astrophysics Data System (ADS)

Kerdtongmee, P.; Srinoum, D.; Nisoa, M.

2011-10-01

A compact helicon plasma source was developed as a millimeter-sized ion source for ion beam bioengineering. By employing a stacked arrangement of annular-shaped permanent magnets, a uniform axial magnetic flux density up to 2.8 kG was obtained. A cost effective 118 MHz RF generator was built for adjusting forward output power from 0 to 40 W. The load impedance and matching network were then analyzed. A single loop antenna and circuit matching elements were placed on a compact printed circuit board for 50 Ω impedance matching. A plasma density up to 1.1 × 1012 cm-3 in the 10 mm diameter tube under the magnetic flux density was achieved with 35 W applied RF power.

Design of a compact, permanent magnet electron cyclotron resonance ion source for proton and H2(+) beam production.

PubMed

Jia, Xianlu; Zhang, Tianjue; Luo, Shan; Wang, Chuan; Zheng, Xia; Yin, Zhiguo; Zhong, Junqing; Wu, Longcheng; Qin, Jiuchang

2010-02-01

A 2.45 GHz microwave ion source was developed at China Institute of Atomic Energy (CIAE) for proton beam production of over 60 mA [B.-Q. Cui, Y.-W. Bao, L.-Q. Li, W.-S. Jiang, and R.-W. Wang, Proceedings of the High Current Electron Cyclotron Resonance (ECR) Ion Source for Proton Accelerator, APAC-2001, 2001 (unpublished)]. For various proton beam applications, another 2.45 GHz microwave ion source with a compact structure is designed and will be built at CIAE as well for high current proton beam production. It is also considered to be used for the test of H(2)(+) beam, which could be injected into the central region model cyclotron at CIAE, and accelerated to 5 MeV before extraction by stripping. The required ECR magnetic field is supplied by all the permanent magnets rather than electrical solenoids and six poles. The magnetic field distribution provided by this permanent magnets configuration is a large and uniformly volume of ECR zone, with central magnetic field of a magnitude of approximately 875 Gs [T. Taylor and J. S. C. Wills, Nucl. Instrum. Methods Phys. Res. A 309, 37 (1991)]. The field adjustment at the extraction end can be implemented by moving the position of the magnet blocks. The results of plasma, coupling with 2.45 GHz microwave in the ECR zone inside the ion source are simulated by particle-in-cell code to optimize the density by adjusting the magnetic field distribution. The design configuration of the ion source will be summarized in the paper.

Filling material for a buried cavity in a collapse area using light-weighted foam and active feldspar

NASA Astrophysics Data System (ADS)

Cho, Jin Woo; Lee, Ju-hyoung; Kim, Sung-Wook; Choi, Eun-Kyeong

2017-04-01

Concrete which is generally used as filling material for a buried cavity has very high strength but significantly high self-load is considered its disadvantage. If it is used as filling material, the second collapse due to additional load, causing irreversible damage. If light-weighted foam and active feldspar are used to solve this problem, the second collapse can be prevented by reducing of self-load of filling material. In this study, the specimen was produced by mixing light-weighted foam, active feldspar and cement, and changes in the density, unconfined compressive strength and hydraulic conductivity were analyzed. Using the light-weighted foam could enable the adjustment of density of specimen between 0.5 g/cm3 and 1.7 g/cm3, and if the mixing ratio of the light-weighted foam increases, the specimen has more pores and smaller range of cross-sectional area. It is confirmed that it has direct correlation with the density, and if the specimen has more pores, the density of the specimen is lowered. The density of the specimen influences the unconfined compressive strength and the hydraulic conductivity, and it was also confirmed that the unconfined compressive strength could be adjusted between 0.6 MPa and 8 MPa and the hydraulic conductivity could be adjusted between 10-9cm/sec and 10-3cm/sec. These results indicated that we can adjust unconfined compressive strength and hydraulic conductivity of filling materials by changing the mixing amount of lightweight-weighted foam according to the requirements of the field condition. Keywords: filling material, buried cavity, light-weighted foam, feldspar Acknowledgement This research was supported by a Grant from a Strategic Research Project (Horizontal Drilling and Stabilization Technologies for Urban Search and Rescue (US&R) Operation) funded by the Korea Institute of Civil Engineering and Building Technology.

High-Strength Aluminum Casting Alloy for High-Temperature Applications (MSFC Center Director's Discretionary Fund Final Project No. 97-10)

NASA Technical Reports Server (NTRS)

Lee, J. A.

1998-01-01

A new aluminum-silicon alloy has been successfully developed at Marshall Space Flight Center that has a significant improvement in tensile strength at elevated temperatures (550 to 700 F). For instance, the new alloy shows in average tensile strength of at least 90 percent higher than the current 390 aluminum piston alloy tested at 500 F. Compared to conventional aluminum alloys, automotive engines using the new piston alloy will have improved gas mileage, and may produce less air pollution in order to meet the future U.S. automotive legislative requirements for low hydrocarbon emissions. The projected cost for this alloy is less than $0.95/lb, and it readily allows the automotive components to be cast at a high production volume with a low, fully accounted cost. It is economically produced by pouring molten metal directly into conventional permanent steel molds or die casting.

High Strength and Wear Resistant Aluminum Alloy for High Temperature Applications

NASA Technical Reports Server (NTRS)

Lee, Jonathan A.; Munafo, Paul M. (Technical Monitor)

2002-01-01

In this paper, a new high strength and wear resistant aluminum cast alloy invented by NASA-MSFC for high temperature applications will be presented. Developed to meet U.S. automotive legislation requiring low-exhaust emission, the novel NASA 398 aluminum-silicon alloy offers dramatic improvement in tensile and fatigue strengths at elevated temperatures (500 F-800 F), enabling new pistons to utilize less material, which can lead to reducing part weight and cost as well as improving performance. NASA 398 alloy also offers greater wear resistance, surface hardness, dimensional stability, and lower thermal expansion compared to conventional aluminum alloys for several commercial and automotive applications. The new alloy can be produced economically using permanent steel molds from conventional gravity casting or sand casting. The technology was developed to stimulate the development of commercial aluminum casting products from NASA-developed technology by offering companies the opportunity to license this technology.

High-Strength Undiffused Brushless (HSUB) Machine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hsu, John S; Tolbert, Leon M; Lee, Seong T

2007-01-01

This paper introduces a new high-strength undiffused brushless machine that transfers the stationary excitation magnetomotive force to the rotor without any brushes. For a conventional permanent magnet (PM) machine, the air gap flux density cannot be enhanced effectively but can be weakened. In the new machine, both the stationary excitation coil and the PM in the rotor produce an enhanced air gap flux. The PM in the rotor prevents magnetic flux diffusion between the poles and guides the reluctance flux path. The pole flux density in the air gap can be much higher than what the PM alone can produce.more » A high-strength machine is thus obtained. The air gap flux density can be weakened through the stationary excitation winding. This type of machine is particularly suitable for electric and hybrid-electric vehicle applications. Patents of this new technology are either granted or pending.« less

High-Strength Undiffused Brushless (HSUB) Machine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hsu, John S; Lee, Seong T; Tolbert, Leon M

2008-01-01

This paper introduces a new high-strength undiffused brushless machine that transfers the stationary excitation magnetomotive force to the rotor without any brushes. For a conventional permanent magnet (PM) machine, the air-gap flux density cannot be enhanced effectively but can be weakened. In the new machine, both the stationary excitation coil and the PM in the rotor produce an enhanced air-gap flux. The PM in the rotor prevents magnetic-flux diffusion between the poles and guides the reluctance flux path. The pole flux density in the air gap can be much higher than what the PM alone can produce. A high-strength machinemore » is thus obtained. The air-gap flux density can be weakened through the stationary excitation winding. This type of machine is particularly suitable for electric and hybrid-electric vehicle applications. Patents of this new technology are either granted or pending.« less

Commercialization of NASA's High Strength Cast Aluminum Alloy for High Temperature Applications

NASA Technical Reports Server (NTRS)

Lee, Jonathan A.

2003-01-01

In this paper, the commercialization of a new high strength cast aluminum alloy, invented by NASA-Marshall Space Flight Center, for high temperature applications will be presented. Originally developed to meet U.S. automotive legislation requiring low- exhaust emission, the novel NASA aluminum alloy offers dramatic improvement in tensile and fatigue strengths at elevated temperatures (450 F-750 F), which can lead to reducing part weight and cost as well as improving performance for automotive engine applications. It is an ideal low cost material for cast components such as pistons, cylinder heads, cylinder liners, connecting rods, turbo chargers, impellers, actuators, brake calipers and rotors. NASA alloy also offers greater wear resistance, dimensional stability, and lower thermal expansion compared to conventional aluminum alloys, and the new alloy can be produced economically from sand, permanent mold and investment casting. Since 2001, this technology was licensed to several companies for automotive and marine internal combustion engines applications.

Type of employment relationship and mortality: prospective study among Finnish employees in 1984-2000.

PubMed

Nätti, Jouko; Kinnunen, Ulla; Mäkikangas, Anne; Mauno, Saija

2009-04-01

The study investigated the relationship between the type of employment (permanent/temporary) contract and mortality. Factors through which temporary employment was expected to be associated with increased mortality were the degree of satisfaction with the uncertainty related to temporary work situation (Study 1) and the voluntary/involuntary basis for temporary work (Study 2). In Study 1 the data consisted of representative survey on Finnish employees in 1984 (n = 4502), which was merged with register-based follow-up data in Statistics Finland covering years 1985-2000. In Study 2 the data consisted of representative survey on Finnish employees in 1990 (n = 3502) with register-based follow-up data covering years 1991-2000. The relative risk of death was examined by conducting Cox proportional hazards analyses for the permanent and the two temporary employment groups, respectively. In Study 1 temporary employees feeling the insecure situation unsatisfactory had a 1.95-fold higher risk of mortality than permanent employees (95% CI 1.13-3.35) after adjusted for background, health- and work-related factors. In Study 2 employees in the position of having a temporary job on the involuntarily basis had a 2.59-fold higher risk of mortality than permanent employees (95% CI 1.16-5.80). The present study confirmed that temporary employees are not a homogeneous group, which holds true even for mortality. Those temporary employees, who either felt the insecure situation unsatisfactory or who worked in temporary work involuntarily, had higher risk of mortality than permanent employees.

Tricuspid Regurgitation and Mortality in Patients with Transvenous Permanent Pacemaker Leads

PubMed Central

Delling, Francesca N.; Hassan, Zena K.; Piatkowski, Gail; Tsao, Connie W.; Rajabali, Alefiyah; Markson, Lawrence J.; Zimetbaum, Peter J.; Manning, Warren J.; Chang, James D.; Mukamal, Kenneth J.

2016-01-01

Estimates of the prevalence and importance of significant tricuspid regurgitation (STR) related to implantable device leads are based mainly on case reports, small observational studies or mixed samples that include defibrillators. We sought to assess whether patients with permanent pacemaker (PPM) leads have an increased risk of STR and to determine mortality associated with PPM-related TR in a large longitudinal single-center cohort. We examined the prevalence of STR (defined as moderate-severe or ≥ 3+) among all echocardiograms performed between 2005 and 2011 excluding those with defibrillators. We then examined mortality risk according to the prevalence of PPM and STR after adjusting for cardiac co-morbidities, left ventricular (LV) systolic/diastolic function, and pulmonary artery hypertension. We screened 93592 echocardiograms (1245 with PPM) among 58556 individual patients (634 with PPM). The prevalence of STR was higher in patients following PPM placement (mean age 79 ± 3 years; 54% males) compared to patients without a PPM (adjusted odds ratio 2.32, 95% confidence interval [CI], 1.54–3.49; p<0.0001). Among patients with a PPM lead, the presence of STR was associated with increased mortality (adjusted hazard ratios [HR] 1.40, 95% CI 1.04–2.11, p=0.027 versus no STR). Compared to having neither a PPM lead nor STR, adjusted HR for death were 2.13 (95% CI, 1.93–2.34) for STR but no PPM, 1.04 (0.89–1.22) for PPM without STR, and 1.55 (1.13–2.14) for PPM with STR. In conclusion, in a sample comprising over 58,000 individual patients, PPM leads are associated with higher risk of STR after adjustment for LV systolic/diastolic function and pulmonary artery hypertension; similarly to STR from other cardiac pathologies, PPM-related STR is associated with increased mortality. PMID:26833208

Muscular strength and incident hypertension in normotensive and prehypertensive men.

PubMed

Maslow, Andréa L; Sui, Xuemei; Colabianchi, Natalie; Hussey, Jim; Blair, Steven N

2010-02-01

The protective effects of cardiorespiratory fitness (CRF) on hypertension (HTN) are well known; however, the association between muscular strength and incidence of HTN has yet to be examined. This study evaluated the strength-HTN association with and without accounting for CRF. Participants were 4147 men (age = 20-82 yr) in the Aerobics Center Longitudinal Study for whom an age-specific composite muscular strength score was computed from measures of a one-repetition maximal leg and a one-repetition maximal bench press. CRF was quantified by maximal treadmill exercise test time in minutes. Cox proportional hazards regression analysis was used to estimate hazard ratios (HR) and 95% confidence intervals of incident HTN events according to exposure categories. During a mean follow-up of 19 yr, there were 503 incident HTN cases. Multivariable-adjusted (excluding CRF) HR of HTN in normotensive men comparing middle- and high-strength thirds to the lowest third were not significant at 1.17 and 0.84, respectively. Multivariable-adjusted (excluding CRF) HR of HTN in baseline prehypertensive men comparing middle- and high-strength thirds to the lowest third were significant at 0.73 and 0.72 (P = 0.01 each), respectively. The association between muscular strength and incidence of HTN in baseline prehypertensive men was no longer significant after control for CRF (P = 0.26). The study indicated that middle and high levels of muscular strength were associated with a reduced risk of HTN in prehypertensive men only. However, this relationship was no longer significant after controlling for CRF.

3D Printed Anchoring Sutures for Permanent Shaping of Tissues.

PubMed

Wei, Wei; Li, Yuxiao; Yang, Huazhe; Nassab, Reza; Shahriyari, Fatemeh; Akpek, Ali; Guan, Xiaofei; Liu, Yanhui; Taranejoo, Shahrouz; Tamayol, Ali; Zhang, Yu Shrike; Khademhosseini, Ali; Jang, Hae Lin

2017-12-01

Sutures are one of the most widely used devices for adhering separated tissues after injury or surgery. However, most sutures require knotting, which can create a risk of inflammation, and can act as mechanically weak points that often result in breakage and slipping. Here, an anchoring suture is presented with a design that facilitates its propagation parallel to the suturing direction, while maximizing its resistive force against the opposite direction of external force to lock its position in tissues. Different microstructures of suture anchors are systematically designed using orthogonal arrays, and selected based on shape factors associated with mechanical strength. 3D printing is used to fabricate different types of hollow microstructured suture anchors, and optimize their structure for the effective shaping of tissues. To define the structural design for fixing tissues, the maximum force required to pull 3D printed anchors in different directions is examined with tissues. The tissue reshaping function of suture anchors is further simulated ex vivo by using swine ear, nose, and skin, and bovine muscle tendon. This study provides advantages for building functional sutures that can be used for permanently reshaping tissues with enhanced mechanical strength, eliminating the need for knotting to improve surgical efficiency. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Circuit Regulates Speed Of dc Motor

NASA Technical Reports Server (NTRS)

Weaver, Charles; Padden, Robin; Brown, Floyd A., Jr.

1990-01-01

Driving circuit regulates speed of small dc permanent-magnet motor in tape recorder. Two nested feedback loops maintain speed within 1 percent of constant value. Inner loop provides coarse regulation, while outer loop removes most of variation in speed that remains in the presence of regulation by the inner loop. Compares speed of motor with commanded speed and adjusts current supplied to motor accordingly.

Disparities in U.S. Air Force Preventive Health Assessments and Medical Deployability

DTIC Science & Technology

2010-01-01

preventive appointments and nondeployable status were calculated by race/ethnicity, gender , and rank, and adjusted for age. Results: Permanent medical...appointments were higher for minorities. Statistically significant differences were identified by gender , but were clinically insignificant. Currency rates...Conclusions: Evidence of disparities in medical deployability rates for Asian/Pacific Islanders, non-Hispanic Blacks, and senior enlisted active duty

Parental Denial: A Supportive and Productive Mechanism Following Traumatic Brain Injury of a Child.

ERIC Educational Resources Information Center

Williams, Dennis

Although denial is usually viewed as a mechanism which impedes a family's adjusting to a child's permanent disability, the mechanism may also be viewed as a family ally which contributes to recovery and positive outcomes in brain-injured children. This paper reviews several types of denial seen in clinical settings and provides examples of both…

Analysis of Labor Market Adjustments in the Clerical Temporary Help Market: 1953-1960.

ERIC Educational Resources Information Center

1971

This report is a theoretical and empirical study of the clerical temporary help labor market with particular reference to how that market was affected by changing states of the permanent labor market. Special attention is paid to the hiring process and to the determination of worker quality over the business cycle. Data for the study were obtained…

Risk Factors For Bradycardia Requiring Pacemaker Implantation In Patients With Atrial Fibrillation

PubMed Central

Barrett, Tyler W.; Abraham, Robert L.; Jenkins, Cathy A.; Russ, Stephan; Storrow, Alan B.; Darbar, Dawood

2012-01-01

Symptomatic bradycardia may complicate atrial fibrillation (AF) and necessitate a permanent pacemaker. Identifying patients at increased risk for symptomatic bradycardia may reduce associated morbidities and healthcare costs. We investigated predictors for developing bradycardia requiring a permanent pacemaker among AF patients. We reviewed records of all patients treated for AF/flutter in an academic hospital’s emergency department from 8/1/2005 to 8/30/2008. We determined survival and presence of a pacemaker as of 11/1/2011. Cases were defined as patients with pacemakers placed for bradycardia after their AF diagnoses. Patients without a pacemaker who were followed at our hospital comprised the controls. We identified a priori variables for the logistic regression analysis. We fit a post-hoc model adjusting for AF type and atrioventricular nodal blocker (AVN) use. Of the 362 patients in our cohort, 119 cases had permanent pacemakers implanted for bradycardia subsequent to AF diagnosis and 243 controls were alive without a pacemaker. Median and interquartile range follow-up time was 4.5 (3.8 – 5.4) years. Odds ratios and 95% confidence intervals were determined for age at time of AF diagnosis (1.02 [1, 1.04]), female (1.58 [0.95, 2.63]), prior heart failure (2.72 [1.47, 5.01]), and African-American (0.33 [0.12, 0.94]). Post-hoc model identified permanent AF (2.99 [1.61, 5.57]) and AVN use (1.43 [0.85, 2.4]). In conclusion, among AF patients, heart failure and permanent AF each nearly triple the odds of developing bradycardia requiring a permanent pacemaker; while not statistically significant, our results suggest that women are more likely and African-Americans less likely to develop bradycardia requiring pacemaker implantation. PMID:22840846

Interaction effect of job insecurity and role ambiguity on psychological distress in Japanese employees: a cross-sectional study.

PubMed

Inoue, Akiomi; Kawakami, Norito; Eguchi, Hisashi; Tsutsumi, Akizumi

2018-05-01

We examined the interaction effect of job insecurity (JI) and role ambiguity (RA) on psychological distress in Japanese employees. Overall, 2184 male and 805 female employees from two factories of a manufacturing company in Japan completed a self-administered questionnaire comprising the scales measuring JI (Job Content Questionnaire), RA (National Institute for Occupational Safety and Health Generic Job Stress Questionnaire), psychological distress (K6 scale), and potential confounders (i.e., age, education, family size, occupational class, and work shift). Taking psychological distress as a dependent variable, hierarchical multiple regression analyses were conducted by gender and employment status (i.e., permanent and non-permanent employees). An interaction term of JI × RA was included in the model. After adjusting for potential confounders, the main effects of JI and RA on psychological distress were significant regardless of gender or employment status. Furthermore, the significant interaction effect of JI × RA on psychological distress was observed among permanent male employees (β = 0.053, p = 0.010). Post hoc simple slope analyses showed that the simple slope of JI was greater at higher levels of RA (i.e., one standard deviation [SD] above the mean) (β = 0.300, p < 0.001) compared to lower levels of RA (i.e., one SD below the mean) (β = 0.212, p < 0.001). On the other hand, the interaction effect of JI × RA was not significant among permanent or non-permanent female employees. The present study suggests that higher levels of RA strengthen the association of JI with psychological distress, at least among Japanese permanent male employees.

The effects of unemployment and perceived job insecurity: a comparison of their association with psychological and somatic complaints, self-rated health and life satisfaction.

PubMed

Griep, Yannick; Kinnunen, Ulla; Nätti, Jouko; De Cuyper, Nele; Mauno, Saija; Mäkikangas, Anne; De Witte, Hans

2016-01-01

Research has provided convincing evidence for the adverse effects of both short- and long-term unemployment, and perceived job insecurity on individuals' health and well-being. This study aims to go one critical step further by comparing the association between short- and long-term unemployment, and perceived job insecurity with a diverse set of health and well-being indicators. We compare four groups: (1) secure permanent employees (N = 2257), (2) insecure permanent employees (N = 713), (3) short-term unemployed (N = 662), and (4) long-term unemployed (N = 345) using cross-sectional data from the nationally representative Living Conditions Survey in Finland. Covariance analyses adjusted for background variables support findings from earlier studies that long-term unemployment and perceived job insecurity are detrimental: short-term unemployed and secure permanent employees experienced fewer psychological complaints and lower subjective complaints load, reported a higher self-rated health, and were more satisfied with their life compared to long-term unemployed and insecure permanent employees. Second, whereas unemployment was found to be more detrimental than insecure employment in terms of life satisfaction, insecure employment was found to be more detrimental than unemployment in terms of psychological complaints. No differences were found regarding subjective complaints load and self-rated health. Our findings suggest that (1) insecure employment relates to more psychological complaints than short-term unemployment and secure permanent employment, (2) insecure employment and long-term unemployment relate to more subjective complaints load and poorer health when compared to secure permanent employment, and (3) insecure employment relates to higher life satisfaction than both short- and long-term unemployment.

Intimate Partner Violence is Associated with Voluntary Sterilization in Women.

PubMed

McCloskey, Laura Ann; Doran, Kelly A; Gerber, Megan R

2017-01-01

Intimate partner violence (IPV) may interfere with women's use of preferred forms of contraception, resulting in unwanted pregnancies forcing women to seek permanent sterilization. A history of child sexual abuse (CSA) presages the risk for IPV in adulthood setting the stage for adverse reproductive outcomes. To determine whether CSA and IPV are associated with women's voluntary sterilization when adjusting for demographics and reproductive health history. This cross-sectional study is based on in-person interviews of women (N = 278) drawn from outpatients surveyed in more than 10 different clinics (N = 2465). Women's history of gender-based violence and bilateral tubal ligation (BTL) were assessed. About half of the women had a past history of IPV and 29% disclosed CSA. CSA predicted later entry into an abusive relationship (odds ratio [OR] = 6.7). Sterilization was reported by 19.6%. Parity (3+ children), having had an abortion, and receipt of welfare were associated with sterilization in univariate tests. Among those women receiving a BTL, 74% had violent partners. Adjusted multivariate logistic regressions, adjusted for demographics and reproductive history, indicated that having had an abusive partner increased the odds of sterilization; parity was also highly associated. CSA exerted only an indirect influence on sterilization via entry into violent relationships. IPV raises the likelihood that women will choose sterilization. Despite the importance of women's access to permanent contraception, priority should be given to screening for gender-based violence and promoting interventions.

Diagnoses Treated in Ambulatory Care Among Homeless-Experienced Veterans

PubMed Central

Gabrielian, Sonya; Yuan, Anita H.; Andersen, Ronald M.; Gelberg, Lillian

2016-01-01

Purpose: Little is known about how permanent supported housing influences ambulatory care received by homeless persons. To fill this gap, we compared diagnoses treated in VA Greater Los Angeles (VAGLA) ambulatory care between Veterans who are formerly homeless—now housed/case managed through VA Supported Housing (“VASH Veterans”)—and currently homeless. Methods: We performed secondary database analyses of homeless-experienced Veterans (n = 3631) with VAGLA ambulatory care use from October 1, 2010 to September 30, 2011. We compared diagnoses treated—adjusting for demographics and need characteristics in regression analyses—between VASH Veterans (n = 1904) and currently homeless Veterans (n = 1727). Results: On average, considering 26 studied diagnoses, VASH (vs currently homeless) Veterans received care for more (P < .05) diagnoses (mean = 2.9/1.7). Adjusting for demographics and need characteristics, VASH Veterans were more likely (P < .05) than currently homeless Veterans to receive treatment for diagnoses across categories: chronic physical illness, acute physical illness, mental illness, and substance use disorders. Specifically, VASH Veterans had 2.5, 1.7, 2.1, and 1.8 times greater odds of receiving treatment for at least 2 condition in these categories, respectively. Among participants treated for chronic illnesses, adjusting for predisposing and need characteristics, VASH (vs currently homeless) Veterans were 9%, 8%, and 11% more likely to have 2 or more visits for chronic physical illnesses, mental illnesses, and substance use disorder, respectively. Conclusion: Among homeless-experienced Veterans, permanent supported housing may reduce disparities in the treatment of diagnoses commonly seen in ambulatory care. PMID:27343544

Longitudinal Associations of Student-Teacher Relationships and Behavioural and Emotional Strengths on Academic Achievement

ERIC Educational Resources Information Center

Sointu, Erkko T.; Savolainen, Hannu; Lappalainen, Kristiina; Lambert, Matthew C.

2017-01-01

Positive student-teacher relationships are related to students' academic achievement and behavioural and emotional adjustment. How a student's behavioural and emotional strengths are associated with these relationships and how the relationships influence students' academic performance remains unknown. We examined this framework using a…

Psychological Adjustment in Adolescents with Vision Impairment

ERIC Educational Resources Information Center

Pinquart, Martin; Pfeiffer, Jens P.

2012-01-01

The present study compared psychological adjustment of 158 adolescents with vision impairment and 158 sighted adolescents with a matched-pair design using the Strengths and Difficulties Questionnaire. Adolescent self-reports and teacher reports on emotional problems, peer problems, and total difficulties showed higher scores in students with…

Baseline and longitudinal change in isometric muscle strength prior to radiographic progression in osteoarthritic and pre-osteoarthritic knees--data from the Osteoarthritis Initiative.

PubMed

Eckstein, F; Hitzl, W; Duryea, J; Kent Kwoh, C; Wirth, W

2013-05-01

To test whether cross-sectional or longitudinal measures of thigh muscle isometric strength differ between knees with and without subsequent radiographic progression of knee osteoarthritis (KOA), with particular focus on pre-osteoarthritic female knees (knees with risk factors but without definite radiographic KOA). Of 4,796 Osteoarthritis Initiative participants, 2,835 knees with Kellgren Lawrence grade (KLG) 0-3 had central X-ray readings, annual quantitative joint space width (JSW) and isometric muscle strength measurements (Good strength chair). Separate slope analysis of covariance (ANCOVA) models were used to determine differences in strength between "progressor" and "non-progressor" knees, after adjusting for age, body mass index, and pain. 466 participant knees exceeded the smallest detectable JSW change during each of two observation intervals (year 2→4 and year 1→3) and were classified as progressors (213 women, 253 men; 128 KLG0/1, 330 KLG2/3); 946 participant knees did not exceed this threshold in either interval and were classified as non-progressors (588 women, 358 from men; 288KLG0/1, 658KLG2/3). Female progressor knees, including those with KLG0/1, tended to have lower extensor and flexor strength at year 2 and at baseline than those without progression, but the difference was not significant after adjusting for confounders. No significant difference was observed in longitudinal change of muscle strength (baseline→year 2) prior to radiographic progression. No significant differences were found for muscle strength in men, and none for change in strength concomitant with progression. This study provides no strong evidence that (changes in) isometric muscle strength precedes or is associated with structural (radiographic) progression of KOA. Copyright © 2013 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Baseline and Longitudinal Change in Isometric Muscle Strength Prior to Radiographic Progression in Osteoarthritic and Pre-Osteoarthritic Knees- Data from the Osteoarthritis Initiative

PubMed Central

Eckstein, Felix; Hitzl, Wolfgang; Duryea, Jeff; Kwoh, C. Kent; Wirth, Wolfgang

2013-01-01

OBJECTIVE To test whether cross-sectional or longitudinal measures of thigh muscle isometric strength differ between knees with and without subsequent radiographic progression of knee osteoarthritis (KOA), with particular focus on pre-osteoarthritic female knees (knees with risk factors but without definite radiographic KOA). METHODS Of 4796 Osteoarthritis Initiative participants, 2835 knees with Kellgren Lawrence grade (KLG) 0–3 had central X-ray readings, annual quantitative joint space width (JSW) and isometric muscle strength measurements (Good strength chair). Separate slope ANCOVA models were used to determine differences in strength between “progressor” and “non- progressor” knees, after adjusting for age, body mass index, and pain. RESULTS 466 participant knees exceeded the smallest detectable JSW change during each of two observation intervals (year 2→4 and year 1→3) and were classified as progressors (213 women, 253 men; 128 KLG0/1, 330 KLG2/3); 946 participant knees did not exceed this threshold in either interval and were classified as non-progressors (588 women, 358 from men; 288KLG0/1, 658KLG2/3). Female progressor knees, including those with KLG0/1, tended to have lower extensor and flexor strength at year2 and at baseline than those without progression, but the difference was not significant after adjusting for confounders. No significant difference was observed in longitudinal change of muscle strength (baseline→year2) prior to radiographic progression. No significant differences were found for muscle strength in men, and none for change in strength concomitant with progression. CONCLUSION This study provides no strong evidence that (changes in) isometric muscle strength precedes or is associated with structural (radiographic) progression of KOA. PMID:23473978

Cardiorespiratory fitness and muscle strength in late adolescence and long-term risk of early heart failure in Swedish men.

PubMed

Lindgren, Martin; Åberg, Maria; Schaufelberger, Maria; Åberg, David; Schiöler, Linus; Torén, Kjell; Rosengren, Annika

2017-05-01

Aims To investigate the association between cardiorespiratory fitness (CRF) and muscle strength in late adolescence and the long-term risk of heart failure (HF). Methods A cohort was created of Swedish men enrolled in compulsory military service between 1968 and 2005 with measurements for CRF and muscle strength ( n = 1,226,623; mean age 18.3 years). They were followed until 31 December 2014 for HF hospitalization as recorded in the Swedish national inpatient registry. Results During the follow-up period (median (interquartile range) 28.4 (22.0-37.0) years), 7656 cases of first HF hospitalization were observed (mean ± SD age at diagnosis 50.1 ± 7.9 years). CRF and muscle strength were estimated by maximum capacity cycle ergometer testing and strength exercises (knee extension, elbow flexion and hand grip). Inverse dose-response relationships were found between CRF and muscle strength with HF as a primary or contributory diagnosis with an adjusted hazards ratio (95% confidence interval) of 1.60 (1.44-1.77) for low CRF and 1.45 (1.32-1.58) for low muscle strength categories. The associations of incident HF with CRF and muscle strength persisted, regardless of adjustments for the other potential confounders. The highest risk was observed for HF associated with coronary heart disease, diabetes or hypertension. Conclusions In this longitudinal study of young men, we found inverse and mutually independent associations between CRF and muscle strength with risk of hospitalization for HF. If causal, these results may emphasize the importance of the promotion of CRF and muscle strength in younger populations.

Odds per adjusted standard deviation: comparing strengths of associations for risk factors measured on different scales and across diseases and populations.

PubMed

Hopper, John L

2015-11-15

How can the "strengths" of risk factors, in the sense of how well they discriminate cases from controls, be compared when they are measured on different scales such as continuous, binary, and integer? Given that risk estimates take into account other fitted and design-related factors-and that is how risk gradients are interpreted-so should the presentation of risk gradients. Therefore, for each risk factor X0, I propose using appropriate regression techniques to derive from appropriate population data the best fitting relationship between the mean of X0 and all the other covariates fitted in the model or adjusted for by design (X1, X2, … , Xn). The odds per adjusted standard deviation (OPERA) presents the risk association for X0 in terms of the change in risk per s = standard deviation of X0 adjusted for X1, X2, … , Xn, rather than the unadjusted standard deviation of X0 itself. If the increased risk is relative risk (RR)-fold over A adjusted standard deviations, then OPERA = exp[ln(RR)/A] = RR(s). This unifying approach is illustrated by considering breast cancer and published risk estimates. OPERA estimates are by definition independent and can be used to compare the predictive strengths of risk factors across diseases and populations. © The Author 2015. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Analysis of flexural strength and contact pressure after simulated chairside adjustment of pressed lithium disilicate glass-ceramic.

PubMed

Ramadhan, Ali; Thompson, Geoffrey A; Maroulakos, Georgios; Berzins, David

2018-04-30

Research evaluating load-to-failure of pressed lithium disilicate glass-ceramic (LDGC) with a clinically validated test after adjustment and repair procedures is scarce. The purpose of this in vitro study was to investigate the effect of the simulated chairside adjustment of the intaglio surface of monolithic pressed LDGC and procedures intended to repair damage. A total of 423 IPS e.max Press (Ivoclar Vivadent AG) disks (15 mm diameter, 1 mm height) were used in the study. The material was tested by using an equibiaxial loading arrangement (n≥30/group) and a contact pressure test (n≥20/group). Specimens were assigned to 1 of 14 groups. One-half was assigned to the equibiaxial load test and the other half underwent contact pressure testing. Testing was performed in 2 parts, before glazing and after glazing. Before-glazing specimens were devested and entered in the test protocol, while after-glazing specimens were devested and glazed before entering the test protocol. Equibiaxial flexure test specimens were placed on a ring-on-ring apparatus and loaded until failure. Contact pressure specimens were cemented to epoxy resin blocks with a resin cement and loaded with a 50-mm diameter hemisphere until failure. Tests were performed on a universal testing machine with a crosshead speed of 0.5 mm/min. Weibull statistics and likelihood ratio contour plots determined intergroup differences (95% confidence bounds). Before glazing, the equibiaxial flexural strength test and the Weibull and likelihood ratio contour plots demonstrated a significantly higher failure strength for 1EC (188 MPa) than that of the damaged and/or repaired groups. Glazing following diamond-adjustment (1EGG) was the most beneficial post-damage procedure (176 MPa). Regarding the contact pressure test, the Weibull and likelihood ratio contour plots revealed no significant difference between the 1PC (98 MPa) and 1PGG (98 MPa) groups. Diamond-adjustment, without glazing (1EG and 1PG), resulted in the next-to-lowest equibiaxial flexure strength and the lowest contact pressure. After glazing, the strength of all the groups, when subjected to glazing following devesting, increased in comparison with corresponding groups in the before-glazing part of the study. A glazing treatment improved the mechanical properties of diamond-adjusted IPS e.max Press disks when evaluated by equibiaxial flexure and contact pressure tests. Copyright © 2018 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

The effect of community-acquired bacteraemia on return to workforce, risk of sick leave, permanent disability pension and death: a Danish population-based cohort study.

PubMed

Dalager-Pedersen, Michael; Koch, Kristoffer; Thomsen, Reimar Wernich; Schønheyder, Henrik Carl; Nielsen, Henrik

2014-01-29

Little is known about the prognosis of community-acquired bacteraemia (CAB) in workforce adults. We assessed return to workforce, risk for sick leave, disability pension and mortality within 1 year after CAB in workforce adults compared with blood culture-negative controls and population controls. Population-based cohort study. North Denmark, 1996-2011. We used population-based healthcare registries to identify all patients aged 20-58 years who had first-time blood cultures obtained within 48 h of medical hospital admission, and who were part of the workforce (450 bacteraemia exposed patients and 6936 culture-negative control patients). For each bacteraemia patient, we included up to 10 matched population controls. Return to workforce, risk of sick leave, permanent disability pension and mortality within 1 year after bacteraemia. Regression analyses were used to compute adjusted relative risks (RRs) with 95% CIs. One year after admission, 78% of patients with CAB, 85.7% of culture-negative controls and 96.8% of population controls were alive and in the workforce, and free from sick leave or disability pension. Compared with culture-negative controls, bacteraemia was associated with an increased risk for long-term sick leave (4-week duration, 40.2% vs 23.9%, adjusted RR, 1.51; CI 1.34 to 1.70) and an increased risk for mortality (30-day mortality, 4% vs 1.4%, adjusted RR, 2.34, CI 1.22 to 4.50; 1-year mortality, 8% vs 3.9%, adjusted RR, 1.73; CI 1.18 to 2.55). Bacteraemia patients had a risk for disability pension similar to culture-negative controls (2.7% vs 2.6%, adjusted RR, 0.99, CI 0.48 to 2.02) but greater than population controls (adjusted RR, 5.20; 95% CI 2.16 to 12.50). CAB is associated with long duration of sick leave and considerable mortality in working-age adults when compared with blood culture-negative controls, and an increased 1-year risk for disability pension when compared with population controls.

Effect of blood contamination on shear bond strength of orthodontic brackets and disinclusion buttons.

PubMed

Sfondrini, Maria Francesca; Gatti, Sara; Scribante, Andrea

2011-07-01

Our aim was to assess the effect of blood contamination on the shear bonding strength and sites of failure of orthodontic brackets and bondable buttons. We randomly divided 160 bovine permanent mandibular incisors into 8 groups of 20 specimens each. Both orthodontic brackets (Step brackets, Leone, Sesto Fiorentino, Italy) and bondable buttons (Flat orthodontic buttons, Leone, Sesto Fiorentino, Italy) were tested on four different enamel surfaces: dry; contamination with blood before priming; after priming; and before and after priming. Brackets and buttons were bonded to the teeth and subsequently tested using a Instron universal testing machine. Shear bonding strength and the rate of adhesive failures were recorded. Data were analysed using the analysis of variance (ANOVA), Scheffè tests, and the chi-square test. Uncontaminated enamel surfaces showed the highest bonding strengths for both brackets and buttons. When they were contaminated with blood, orthodontic brackets had significantly lower shear strengths than bondable buttons (P=0.0001). There were significant differences in sites of failure among the groups for the various enamel surfaces (P=0.001). Contamination of enamel by blood during bonding lowers the strength of the bond, more so with orthodontic brackets than with bondable buttons. Copyright © 2010 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Measurements of beam current density and proton fraction of a permanent-magnet microwave ion source.

PubMed

Waldmann, Ole; Ludewigt, Bernhard

2011-11-01

A permanent-magnet microwave ion source has been built for use in a high-yield, compact neutron generator. The source has been designed to produce up to 100 mA of deuterium and tritium ions. The electron-cyclotron resonance condition is met at a microwave frequency of 2.45 GHz and a magnetic field strength of 87.5 mT. The source operates at a low hydrogen gas pressure of about 0.15 Pa. Hydrogen beams with a current density of 40 mA/cm(2) have been extracted at a microwave power of 450 W. The dependence of the extracted proton beam fraction on wall materials and operating parameters was measured and found to vary from 45% for steel to 95% for boron nitride as a wall liner material. © 2011 American Institute of Physics

Analog hardware for learning neural networks

NASA Technical Reports Server (NTRS)

Eberhardt, Silvio P. (Inventor)

1991-01-01

This is a recurrent or feedforward analog neural network processor having a multi-level neuron array and a synaptic matrix for storing weighted analog values of synaptic connection strengths which is characterized by temporarily changing one connection strength at a time to determine its effect on system output relative to the desired target. That connection strength is then adjusted based on the effect, whereby the processor is taught the correct response to training examples connection by connection.

Comparison of shear bond strength of universal adhesives on etched and nonetched enamel.

PubMed

Beltrami, Riccardo; Chiesa, Marco; Scribante, Andrea; Allegretti, Jessica; Poggio, Claudio

2016-04-06

The purpose of this study was to evaluate the effect of surface pretreatment with 37% phosphoric acid on the enamel bond strength of different universal adhesives. One hundred and sixty bovine permanent mandibular incisors freshly extracted were used as a substitute for human teeth. The materials tested in this study included 6 universal adhesives, and 2 self-etch adhesives as control. The teeth were assigned into 2 groups: In the first group, etching was performed using 37% phosphoric acid for 30 seconds. In the second group, no pretreatment agent was applied. After adhesive application, a nanohybrid composite resin was inserted into the enamel surface by packing the material into cylindrical-shaped plastic matrices. After storing, the specimens were placed in a universal testing machine. The normality of the data was calculated using the Kolmogorov-Smirnov test. Analysis of variance (ANOVA) was applied to determine whether significant differences in debond strength values existed among the various groups. Groups with phosphoric acid pretreatment showed significantly higher shear bond strength values than groups with no enamel pretreatment (p<0.001). No significant variation in shear strength values was detected when comparing the different adhesive systems applied onto enamel after orthophosphoric acid application (p>0.05). All adhesives provide similar bond strength values when enamel pretreatment is applied even if compositions are different. Bond strength values are lower than promised by manufacturers.

Elliptically polarizing adjustable phase insertion device

DOEpatents

Carr, Roger

1995-01-01

An insertion device for extracting polarized electromagnetic energy from a beam of particles is disclosed. The insertion device includes four linear arrays of magnets which are aligned with the particle beam. The magnetic field strength to which the particles are subjected is adjusted by altering the relative alignment of the arrays in a direction parallel to that of the particle beam. Both the energy and polarization of the extracted energy may be varied by moving the relevant arrays parallel to the beam direction. The present invention requires a substantially simpler and more economical superstructure than insertion devices in which the magnetic field strength is altered by changing the gap between arrays of magnets.

A new adaptive self-tuning Fourier coefficients algorithm for periodic torque ripple minimization in permanent magnet synchronous motors (PMSM).

PubMed

Gómez-Espinosa, Alfonso; Hernández-Guzmán, Víctor M; Bandala-Sánchez, Manuel; Jiménez-Hernández, Hugo; Rivas-Araiza, Edgar A; Rodríguez-Reséndiz, Juvenal; Herrera-Ruíz, Gilberto

2013-03-19

A New Adaptive Self-Tuning Fourier Coefficients Algorithm for Periodic Torque Ripple Minimization in Permanent Magnet Synchronous Motors (PMSM) Torque ripple occurs in Permanent Magnet Synchronous Motors (PMSMs) due to the non-sinusoidal flux density distribution around the air-gap and variable magnetic reluctance of the air-gap due to the stator slots distribution. These torque ripples change periodically with rotor position and are apparent as speed variations, which degrade the PMSM drive performance, particularly at low speeds, because of low inertial filtering. In this paper, a new self-tuning algorithm is developed for determining the Fourier Series Controller coefficients with the aim of reducing the torque ripple in a PMSM, thus allowing for a smoother operation. This algorithm adjusts the controller parameters based on the component's harmonic distortion in time domain of the compensation signal. Experimental evaluation is performed on a DSP-controlled PMSM evaluation platform. Test results obtained validate the effectiveness of the proposed self-tuning algorithm, with the Fourier series expansion scheme, in reducing the torque ripple.

Influence of relief on permanent preservation areas.

PubMed

Dos Santos, Alexandre Rosa; Chimalli, Tessa; Peluzio, João Batista Esteves; da Silva, Aderbal Gomes; Dos Santos, Gleissy Mary Amaral Dino Alves; Lorenzon, Alexandre Simões; Teixeira, Thaisa Ribeiro; de Castro, Nero Lemos Martins; Soares Ribeiro, Carlos Antonio Alvares

2016-01-15

Many countries have environmental legislation to protecting natural resources on private property. In Brazil, the Brazilian Forestry Code determines specific areas to maintain with natural vegetation cover, known as areas of permanent preservation (APP). Currently, there are few studies that relate topographic variables on APP. In this context, we sought to evaluate the influence of relief on the conservation of areas of permanent preservation (APP) in the areas surrounding Caparaó National Park, Brazil. By using the chi-squared statistical test, we verified that the presence of forest cover is closely associated with altitude. The classes of APP in better conservation status are slopes in addition to hilltops and mountains, whereas APP streams and springs are among the areas most affected by human activities. The most deforested areas are located at altitudes below 1100.00 m and on slopes less than 45°. All orientations of the sides were significant for APP conservation status, with the southern, southeastern, and southwestern sides showing the lower degrees of impact. The methodology can be adjusted to environmental legislation to other countries.

Biodegradation behavior of styrene butadiene rubber (SBR) reinforced with modified coconut shell powder

NASA Astrophysics Data System (ADS)

Sreejith, M. P.; Balan, Aparna K.; Shaniba, V.; Jinitha, T. V.; Subair, N.; Purushothaman, E.

2017-06-01

Biodegradation behavior of styrene butadiene rubber composites reinforced with natural filler, coconut shell powder (CSP), with different filler loadings were carried out under soil burial conditions for three to six months. The extent of biodegradation of the composites was evaluated through weight loss, tensile strength and hardness measurements. It was observed that the permanence of the composites was remarkably dependent on filler modification, size of the filler particle and filler content. Composites containing silane modified filler were found to be more resistant to attack by the microbes present in the soil. Mechanical properties such as tensile strength, Young's modulus and hardness were decreased after soil burial testing due to the microbial attack onto the samples.

Promoting Child Safety, Permanence, and Well-Being through Safe and Strong Families, Supportive Communities, and Effective Systems. Policy Matters: Setting and Measuring Benchmarks for State Policies. A Discussion Paper for the "Policy Matters" Project

ERIC Educational Resources Information Center

Center for the Study of Social Policy, 2009

2009-01-01

The "Policy Matters" project provides coherent, comprehensive information regarding the strength and adequacy of state policies affecting children, families, and communities. The project seeks to establish consensus among policy experts and state leaders regarding the mix of policies believed to offer the best opportunity for improving…

Muscular Strength and Incident Hypertension in Normotensive and Prehypertensive Men

PubMed Central

Maslow, Andréa L.; Sui, Xuemei; Colabianchi, Natalie; Hussey, Jim; Blair, Steven N.

2009-01-01

The protective effects of cardiorespiratory fitness (CRF) on hypertension (HTN) are well known; however, the association between muscular strength and incidence of HTN has yet to be examined. Purpose This study evaluated the strength-HTN association with and without accounting for CRF. Methods Participants were 4147 men (20–82 years) in the Aerobics Center Longitudinal Study for whom an age-specific composite muscular strength score was computed from measures of a 1-repetition maximal leg and a 1-repetition maximal bench press. CRF was quantified by maximal treadmill exercise test time in minutes. Cox proportional hazards regression analysis was used to estimate hazard ratios (HRs) and 95% confidence intervals of incident HTN events according to exposure categories. Results During a mean follow-up of 19 years, there were 503 incident HTN cases. Multivariable-adjusted (excluding CRF) HRs of hypertension in normotensive men comparing middle and high strength thirds to the lowest third were not significant at 1.17 and 0.84, respectively. Multivariable-adjusted (excluding CRF) HRs of hypertension in baseline prehypertensive men comparing middle and high strength thirds to the lowest third were significant at 0.73 and 0.72 (p=.01 each), respectively. The association between muscular strength and incidence of HTN in baseline prehypertensive men was no longer significant after control for CRF (p=.26). Conclusions The study indicated that middle and high levels of muscular strength were associated with a reduced risk of HTN in prehypertensive men only. However, this relationship was no longer significant after controlling for CRF. PMID:19927030

US Policy on the South China Sea: Should the US Make Adjustments Following the Permanent Court of Arbitration Ruling

DTIC Science & Technology

2017-10-26

Government of the Philippines, and international community, a diplomatic tool to counter Chinese encroachment in the Philippines exclusive economic zone and...Philippines, and international community, a diplomatic tool to counter Chinese encroachment in the Philippines exclusive economic zone and more...nations within their exclusive economic zones (EEZs). 1 Bill Hayton, The South China Sea (New Haven

Sensing Fissile Materials at Long Range

DTIC Science & Technology

2016-04-01

Adjusted Magnetic Design Working Point Parametrics ................................................ 21  B.  Use of  HTS  Monoliths or Permanent Magnets for...25  B.3 Applications of  HTS  bulk to cyclotrons. ....................................................................... 26  B.4...57  D.  HTS  Potential for cyclotrons

Grip strength measurement for frailty assessment in patients with vascular disease and associations with comorbidity, cardiac risk, and sarcopenia.

PubMed

Reeve, Thomas E; Ur, Rebecca; Craven, Timothy E; Kaan, James H; Goldman, Matthew P; Edwards, Matthew S; Hurie, Justin B; Velazquez-Ramirez, Gabriela; Corriere, Matthew A

2018-05-01

Frailty is associated with adverse events, length of stay, and nonhome discharge after vascular surgery. Frailty measures based on walking-based tests may be impractical or invalid for patients with walking impairment from symptoms or sequelae of vascular disease. We hypothesized that grip strength is associated with frailty, comorbidity, and cardiac risk among patients with vascular disease. Dominant hand grip strength was measured during ambulatory clinic visits among patients with vascular disease (abdominal aortic aneurysm [AAA], carotid stenosis, and peripheral artery disease [PAD]). Frailty prevalence was defined on the basis of the 20th percentile of community-dwelling population estimates adjusted for age, gender, and body mass index. Associations between grip strength, Charlson Comorbidity Index (CCI), Revised Cardiac Risk Index (RCRI), and sarcopenia (based on total psoas area for patients with cross-sectional abdominal imaging) were evaluated using linear and logistic regression. Grip strength was measured in 311 participants; all had sufficient data for CCI calculation, 217 (69.8%) had sufficient data for RCRI, and 88 (28.3%) had cross-sectional imaging permitting psoas measurement. Eighty-six participants (27.7%) were categorized as frail on the basis of grip strength. Frailty was associated with CCI (odds ratio, 1.86; 95% confidence interval, 1.34-2.57; P = .0002) in the multivariable model. Frail participants also had a higher average number of RCRI components vs nonfrail patients (mean ± standard deviation, 1.8 ± 0.8 for frail vs 1.5 ± 0.7 for nonfrail; P = .018); frailty was also associated with RCRI in the adjusted multivariable model (odds ratio, 1.75; 95% confidence interval, 1.16-2.64; P = .008). Total psoas area was lower among patients categorized as frail vs nonfrail on the basis of grip strength (21.0 ± 6.6 vs 25.4 ± 7.4; P = .010). Each 10 cm 2 increase in psoas area was associated with a 5.7 kg increase in grip strength in a multivariable model adjusting for age and gender (P < .0001). Adjusted least squares mean psoas diameter estimates were 25.5 ± 1.1 cm 2 for participants with AAA, 26.7 ± 2.0 cm 2 for participants with carotid stenosis, and 22.7 ± 0.8 cm 2 for participants with PAD (P = .053 for PAD vs AAA; P = .057 for PAD vs carotid stenosis; and P = .564 for AAA vs carotid stenosis). Grip strength is useful for identifying frailty among patients with vascular disease. Frail status based on grip strength is associated with comorbidity, cardiac risk, and sarcopenia in this population. These findings suggest that grip strength may have utility as a simple and inexpensive risk screening tool that is easily implemented in ambulatory clinics, avoids the need for imaging, and overcomes possible limitations of walking-based measures. Lower mean psoas diameters among patients with PAD vs other diagnoses may warrant consideration of specific approaches to morphomic analysis. Copyright © 2017 Society for Vascular Surgery. Published by Elsevier Inc. All rights reserved.

Adult Bone Strength of Children from Single-Parent Families: The Midlife in the U.S. Study

PubMed Central

Crandall, Carolyn J.; Karlamangla, Arun S.; Merkin, Sharon Stein; Binkley, Neil; Carr, Deborah; Greendale, Gail A.; Seeman, Teresa E.

2015-01-01

Purpose Because peak bone mass is acquired during childhood, bone health may be negatively impacted by childhood socio-environmental disadvantage. The goal of this study was to determine whether being raised in a single-parent household is associated with lower bone strength in adulthood. Methods Using dual-energy x-ray absorptiometry data from 708 participants (mean age 57 years) in the Midlife in the United States Biomarker Project, we examined the independent associations of composite indices of femoral neck bone strength relative to load (in three failure modes: compression, bending, and impact) in adulthood with the experience of single-parent childhood and parental death or divorce in childhood. Results After adjustment for gender, race, menopause transition stage, age, and body mass index, each additional year of single-parent childhood was associated with 0.02 to 0.03 SD lower indices of adult femoral neck strength. In those with 9-16 years of single-parent childhood, the compression strength index was 0.41 SD lower, bending strength index was 0.31 SD lower, and impact strength index was 0.25 SD lower (all p-values < 0.05). In contrast, parental death or divorce during childhood was not by itself independently associated with adult bone strength indices. The magnitudes of these associations were unaltered by additional adjustment for lifestyle factors and socioeconomic status in childhood and adulthood. Conclusions Independent of parental death or divorce, growing up in a single-parent household is associated with lower femoral neck bone strength in adulthood, and this association is not entirely explained by childhood or adult socioeconomic conditions or lifestyle choices. PMID:25510582

Sensory and motor peripheral nerve function and lower-extremity quadriceps strength: the health, aging and body composition study.

PubMed

Strotmeyer, Elsa S; de Rekeneire, Nathalie; Schwartz, Ann V; Resnick, Helaine E; Goodpaster, Bret H; Faulkner, Kimberly A; Shorr, Ronald I; Vinik, Aaron I; Harris, Tamara B; Newman, Anne B

2009-11-01

To determine whether sensory and motor nerve function is associated cross-sectionally with quadriceps or ankle dorsiflexion strength in an older community-based population. Cross-sectional analyses within a longitudinal cohort study. Two U.S. clinical sites. Two thousand fifty-nine Health, Aging and Body Composition Study (Health ABC) participants (49.5% male, 36.7% black, aged 73-82) in 2000/01. Quadriceps and ankle strength were measured using an isokinetic dynamometer. Sensory and motor peripheral nerve function in the legs and feet was assessed using 10-g and 1.4-g monofilaments, vibration threshold, and peroneal motor nerve conduction amplitude and velocity. Monofilament insensitivity, poorest vibration threshold quartile (>60 mu), and poorest motor nerve conduction amplitude quartile (<1.7 mV) were associated with 11%, 7%, and 8% lower quadriceps strength (all P<.01), respectively, than in the best peripheral nerve function categories in adjusted linear regression models. Monofilament insensitivity and lowest amplitude quartile were both associated with 17% lower ankle strength (P<.01). Multivariate analyses were adjusted for demographic characteristics, diabetes mellitus, body composition, lifestyle factors, and chronic health conditions and included all peripheral nerve measures in the same model. Monofilament insensitivity (beta=-7.19), vibration threshold (beta=-0.097), and motor nerve conduction amplitude (beta=2.01) each contributed independently to lower quadriceps strength (all P<.01). Monofilament insensitivity (beta=-5.29) and amplitude (beta=1.17) each contributed independently to lower ankle strength (all P<.01). Neither diabetes mellitus status nor lean mass explained the associations between peripheral nerve function and strength. Reduced sensory and motor peripheral nerve function is related to poorer lower extremity strength in older adults, suggesting a mechanism for the relationship with lower extremity disability.

Grip Strength as a Marker of Hypertension and Diabetes in Healthy Weight Adults

PubMed Central

Mainous, Arch G.; Tanner, Rebecca J.; Anton, Stephen D.; Jo, Ara

2015-01-01

Introduction Muscle strength may play a role in cardiometabolic disease. We examined the relationship between hand grip strength and diabetes and hypertension in a sample of healthy weight adults. Methods In 2015, we analyzed the National Health and Nutrition Examination Survey 2011–2012 for adults aged ≥20 years with healthy BMIs (between 18.5 and <25 kg/m2) and no history of cardiovascular disease (unweighted n=1,469; weighted n=61,672,082). Hand grip strength was assessed with a dynamometer. Diabetes was based on hemoglobin A1c level and reported diabetes diagnosis. Hypertension was based on measured blood pressure and reported hypertension diagnosis. Results Individuals with undiagnosed diabetes compared with individuals without diabetes had lower grip strength (51.9 vs 69.8, p=0.0001), as well as among individuals with diagnosed diabetes compared with individuals without diabetes (61.7 vs 69.8, p=0.008). Mean grip strength was lower among individuals with undiagnosed hypertension compared with individuals without hypertension (63.5 vs 71.5, p=0.008) as well as among individuals with diagnosed hypertension compared with those without hypertension (60.8 vs 71.5, p<0.0001). In adjusted analyses controlling for age, sex, race, smoking status, and first-degree relative with disease, mean grip strength was lower for undiagnosed diabetes (β= −10.02, p<0.0001) and diagnosed diabetes (β= −8.21, p=0.03) compared with individuals without diabetes. In adjusted analyses, grip strength was lower among individuals with undiagnosed hypertension (β= −6.6, p=0.004) and diagnosed hypertension (β= −4.27, p=0.04) compared with individuals without hypertension. Conclusions Among healthy weight adults, combined grip strength is lower in individuals with diagnosed and undiagnosed diabetes and hypertension. PMID:26232901

Dietary Protein Intake Is Protective Against Loss of Grip Strength Among Older Adults in the Framingham Offspring Cohort

PubMed Central

McLean, Robert R.; Mangano, Kelsey M.; Hannan, Marian T.; Kiel, Douglas P.

2016-01-01

Abstract Background: Age-related decline in muscle strength is an important public health issue for older adults. Dietary protein has been associated with maintenance of muscle mass, yet its relation to muscle strength remains unclear. Methods: We determined the association of dietary protein (total, animal, and plant) intake, measured by food frequency questionnaire, with change in grip strength over 6 years in 1,746 men and women from the Framingham Offspring cohort. Results: Mean age at baseline was 58.7 years (range: 29–85), and mean total, animal, and plant protein intakes were 79, 57, and 22g/d, respectively. Adjusted baseline mean grip strength did not differ across quartiles of energy-adjusted total, animal or protein intake. Greater protein intake, regardless of source, was associated with less decrease in grip strength (all p for trend ≤.05): participants in the lowest quartiles lost 0.17% to 0.27% per year while those in the highest quartiles gained 0.52% to 0.60% per year. In analyses stratified by age, participants aged 60 years or older ( n = 646) had similar linear trends on loss of grip strength for total and animal (all p for trend <.03) but not plant protein, while the trends in participants younger than 60 years ( n = 896) were not statistically significant. Conclusions: Higher dietary intakes of total and animal protein were protective against loss of grip strength in community-dwelling adults aged 60 years and older. Increasing intake of protein from these sources may help maintain muscle strength and support prevention of mobility impairment in older adults. PMID:26525088

Mapping the natural variation in whole bone stiffness and strength across skeletal sites.

PubMed

Schlecht, Stephen H; Bigelow, Erin M R; Jepsen, Karl J

2014-10-01

Traits of the skeletal system are coordinately adjusted to establish mechanical homeostasis in response to genetic and environmental factors. Prior work demonstrated that this 'complex adaptive' process is not perfect, revealing a two-fold difference in whole bone stiffness of the tibia across a population. Robustness (specifically, total cross-sectional area relative to length) varies widely across skeletal sites and between sexes. However, it is unknown whether the natural variation in whole bone stiffness and strength also varies across skeletal sites and between men and women. We tested the hypotheses that: 1) all major long bones of the appendicular skeleton demonstrate inherent, systemic constraints in the degree to which morphological and compositional traits can be adjusted for a given robustness; and 2) these traits covary in a predictable manner independent of body size and robustness. We assessed the functional relationships among robustness, cortical area (Ct.Ar), cortical tissue mineral density (Ct.TMD), and bone strength index (BSI) across the long bones of the upper and lower limbs of 115 adult men and women. All bones showed a significant (p<0.001) positive regression between BSI and robustness after adjusting for body size, with slender bones being 1.7-2.3 times less stiff and strong in men and 1.3-2.8 times less stiff and strong in women compared to robust bones. Our findings are the first to document the natural inter-individual variation in whole bone stiffness and strength that exist within populations and that is predictable based on skeletal robustness for all major long bones. Documenting and further understanding this natural variation in strength may be critical for differentially diagnosing and treating skeletal fragility. Copyright © 2014 Elsevier Inc. All rights reserved.

Mapping the natural variation in whole bone stiffness and strength across skeletal sites

PubMed Central

Schlecht, Stephen H.; Bigelow, Erin M.R.; Jepsen, Karl J.

2016-01-01

Traits of the skeletal system are coordinately adjusted to establish mechanical homeostasis in response to genetic and environmental factors. Prior work demonstrated that this `complex adaptive' process is not perfect, revealing a two-fold difference in whole bone stiffness of the tibia across a population. Robustness (specifically, total cross-sectional area relative to length) varies widely across skeletal sites and between sexes. However, it is unknown whether the natural variation in whole bone stiffness and strength also varies across skeletal sites and between men and women. We tested the hypotheses that: 1) all major long bones of the appendicular skeleton demonstrate inherent, systemic constraints in the degree to which morphological and compositional traits can be adjusted for a given robustness; and 2) these traits covary in a predictable manner independent of body size and robustness. We assessed the functional relationships among robustness, cortical area (Ct.Ar), cortical tissue mineral density (Ct.TMD), and bone strength index (BSI) across the long bones of the upper and lower limbs of 115 adult men and women. All bones showed a significant (p < 0.001) positive regression between BSI and robustness after adjusting for body size, with slender bones being 1.7–2.3 times less stiff and strong in men and 1.3–2.8 times less stiff and strong in women compared to robust bones. Our findings are the first to document the natural inter-individual variation in whole bone stiffness and strength that exist within populations and that is predictable based on skeletal robustness for all major long bones. Documenting and further understanding this natural variation in strength may be critical for differentially diagnosing and treating skeletal fragility. PMID:24999223

A detachable mobile and adjustable telemetry system

PubMed Central

Parker, Tommy S; Persons, William E; Bradley, Joseph G; Gregg, Margaret; Gonzales, Shinelle K; Helton, Jesse S

2013-01-01

Many traditional mobile telemetry systems require permanently mounting a rod through the cabin of a vehicle to serve as the mast for a directional antenna. In this article we present an alternative to this configuration by providing a platform that can be placed atop the vehicle in which the antenna mast can be mounted and controlled from the cabin of the vehicle. Thereby making this design a viable option for researchers who share vehicles with others that may not approve of permanent vehicle modifications such as placing a hole in the roof of the vehicle as required by traditional mobile configurations. We tested the precision and accuracy of detachable mobile and adjustable telemetry system (DMATS) in an urban park with varying terrain, tree stands, overhead wires, and other structures that can contribute to signal deflection. We placed three radiocollars 50 m apart and 1.2 m above the ground then established three testing stations ∼280 m from the location of the radiocollars. The DMATS platform required 12 h for completion and cost $1059 USD. Four technicians were randomly assigned radio collars to triangulate using DMATS and a handheld telemetry system. We used a one-way analysis of variance (ANOVA) with a Scheffe post hoc test to compare error ellipses between azimuths taken using DMATS and the hand held system. Average error ellipses for all testers was 1.96 ± 1.22 ha. No significant differences were found between error ellipses of testers (P = 0.292). Our design, the DMATS, does not require any vehicle modification; thereby, making this a viable option for researchers sharing vehicles with others that may not approve of permanent vehicle alterations. PMID:23919133

Contribution of vertical strength and power to sprint performance in young male athletes.

PubMed

Meylan, C M P; Cronin, J; Oliver, J L; Hopkins, W G; Pinder, S

2014-08-01

The purpose of this study was to assess the possible contribution of 1RM leg-press strength and jump peak power to 20-m sprint time in young athletes in three maturity groups based on age relative to predicted age of peak height velocity (PHV): Pre (- 2.5 to -1.0 years; n=25), Mid (- 1.0 to 0.5 years; n=26) and Post (0.5 to 2.0 years; n=15). Allometric scaling factors, representing percent difference in 20-m time per percent difference in strength and peak power, were derived by linear regression and were similar in the three maturity groups (-0.16%/% and -0.20%/% for strength and peak power, respectively). The moderate increase in sprint performance Pre to Mid PHV (5.7%) reduced to small (1.9%) and trivial but unclear (0.9%) magnitudes after adjustment for 1RM and peak power, while the moderate increase Mid to Post PHV (4.6%) were still moderate (3.4 and 3.0%) after adjustment. Thus percent differences in strength or power explained most of the maturity-related improvements in sprint performance before PHV age but only some improvements after PHV age. Factors in addition to strength and power should be identified and monitored for development of speed in athletes during puberty. © Georg Thieme Verlag KG Stuttgart · New York.

A poly(glycerol sebacate)-coated mesoporous bioactive glass scaffold with adjustable mechanical strength, degradation rate, controlled-release and cell behavior for bone tissue engineering.

PubMed

Lin, Dan; Yang, Kai; Tang, Wei; Liu, Yutong; Yuan, Yuan; Liu, Changsheng

2015-07-01

Various requirements in the field of tissue engineering have motivated the development of three-dimensional scaffold with adjustable physicochemical properties and biological functions. A series of multiparameter-adjustable mesoporous bioactive glass (MBG) scaffolds with uncrosslinked poly(glycerol sebacate) (PGS) coating was prepared in this article. MBG scaffold was prepared by a modified F127/PU co-templating process and then PGS was coated by a simple adsorption and lyophilization process. Through controlling macropore parameters and PGS coating amount, the mechanical strength, degradation rate, controlled-release and cell behavior of the composite scaffold could be modulated in a wide range. PGS coating successfully endowed MBG scaffold with improved toughness and adjustable mechanical strength covering the bearing range of trabecular bone (2-12MPa). Multilevel degradation rate of the scaffold and controlled-release rate of protein from mesopore could be achieved, with little impact on the protein activity owing to an "ultralow-solvent" coating and "nano-cavity entrapment" immobilization method. In vitro studies indicated that PGS coating promoted cell attachment and proliferation in a dose-dependent manner, without affecting the osteogenic induction capacity of MBG substrate. These results first provide strong evidence that uncrosslinked PGS might also yield extraordinary achievements in traditional MBG scaffold. With the multiparameter adjustability, the composite MBG/PGS scaffolds would have a hopeful prospect in bone tissue engineering. The design considerations and coating method of this study can also be extended to other ceramic-based artificial scaffolds and are expected to provide new thoughts on development of future tissue engineering materials. Copyright © 2015 Elsevier B.V. All rights reserved.

Increased Heart Rate Is Associated With Higher Mortality in Patients With Atrial Fibrillation (AF): Results From the Outcomes Registry for Better Informed Treatment of AF (ORBIT-AF)

PubMed Central

Steinberg, Benjamin A; Kim, Sunghee; Thomas, Laine; Fonarow, Gregg C; Gersh, Bernard J; Holmqvist, Fredrik; Hylek, Elaine; Kowey, Peter R; Mahaffey, Kenneth W; Naccarelli, Gerald; Reiffel, James A; Chang, Paul; Peterson, Eric D; Piccini, Jonathan P

2015-01-01

Background Most patients with atrial fibrillation (AF) require rate control; however, the optimal target heart rate remains under debate. We aimed to assess rate control and subsequent outcomes among patients with permanent AF. Methods and Results We studied 2812 US outpatients with permanent AF in the Outcomes Registry for Better Informed Treatment of Atrial Fibrillation. Resting heart rate was measured longitudinally and used as a time-dependent covariate in multivariable Cox models of all-cause and cause-specific mortality during a median follow-up of 24 months. At baseline, 7.4% (n=207) had resting heart rate <60 beats per minute (bpm), 62% (n=1755) 60 to 79 bpm, 29% (n=817) 80 to 109 bpm, and 1.2% (n=33) ≥110 bpm. Groups did not differ by age, previous cerebrovascular disease, heart failure status, CHA2DS2-VASc scores, renal function, or left ventricular function. There were significant differences in race (P=0.001), sinus node dysfunction (P=0.004), and treatment with calcium-channel blockers (P=0.006) and anticoagulation (P=0.009). In analyses of continuous heart rates, lower heart rate ≤65 bpm was associated with higher all-cause mortality (adjusted hazard ratio [HR], 1.15 per 5-bpm decrease; 95% CI, 1.01 to 1.32; P=0.04). Similarly, increasing heart rate >65 bpm was associated with higher all-cause mortality (adjusted HR, 1.10 per 5-bpm increase; 95% CI, 1.05 to 1.15; P<0.0001). This relationship was consistent across endpoints and in a broader sensitivity analysis of permanent and nonpermanent AF patients. Conclusions Among patients with permanent AF, there is a J-shaped relationship between heart rate and mortality. These data support current guideline recommendations, and clinical trials are warranted to determine optimal rate control. Clinical Trial Registration URL: http://clinicaltrials.gov/. Unique identifier: NCT01165710. PMID:26370445

Increased Heart Rate Is Associated With Higher Mortality in Patients With Atrial Fibrillation (AF): Results From the Outcomes Registry for Better Informed Treatment of AF (ORBIT-AF).

PubMed

Steinberg, Benjamin A; Kim, Sunghee; Thomas, Laine; Fonarow, Gregg C; Gersh, Bernard J; Holmqvist, Fredrik; Hylek, Elaine; Kowey, Peter R; Mahaffey, Kenneth W; Naccarelli, Gerald; Reiffel, James A; Chang, Paul; Peterson, Eric D; Piccini, Jonathan P

2015-09-14

Most patients with atrial fibrillation (AF) require rate control; however, the optimal target heart rate remains under debate. We aimed to assess rate control and subsequent outcomes among patients with permanent AF. We studied 2812 US outpatients with permanent AF in the Outcomes Registry for Better Informed Treatment of Atrial Fibrillation. Resting heart rate was measured longitudinally and used as a time-dependent covariate in multivariable Cox models of all-cause and cause-specific mortality during a median follow-up of 24 months. At baseline, 7.4% (n=207) had resting heart rate <60 beats per minute (bpm), 62% (n=1755) 60 to 79 bpm, 29% (n=817) 80 to 109 bpm, and 1.2% (n=33) ≥110 bpm. Groups did not differ by age, previous cerebrovascular disease, heart failure status, CHA2DS2-VASc scores, renal function, or left ventricular function. There were significant differences in race (P=0.001), sinus node dysfunction (P=0.004), and treatment with calcium-channel blockers (P=0.006) and anticoagulation (P=0.009). In analyses of continuous heart rates, lower heart rate ≤65 bpm was associated with higher all-cause mortality (adjusted hazard ratio [HR], 1.15 per 5-bpm decrease; 95% CI, 1.01 to 1.32; P=0.04). Similarly, increasing heart rate >65 bpm was associated with higher all-cause mortality (adjusted HR, 1.10 per 5-bpm increase; 95% CI, 1.05 to 1.15; P<0.0001). This relationship was consistent across endpoints and in a broader sensitivity analysis of permanent and nonpermanent AF patients. Among patients with permanent AF, there is a J-shaped relationship between heart rate and mortality. These data support current guideline recommendations, and clinical trials are warranted to determine optimal rate control. URL: http://clinicaltrials.gov/. Unique identifier: NCT01165710. © 2015 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley Blackwell.

Adult bone strength of children from single-parent families: the Midlife in the United States Study.

PubMed

Crandall, C J; Karlamangla, A S; Merkin, S S; Binkley, N; Carr, D; Greendale, G A; Seeman, T E

2015-03-01

Bone health may be negatively impacted by childhood socio-environmental circumstances. We examined the independent associations of single-parent childhood and parental death or divorce in childhood with adult bone strength indices. Longer exposure to a single-parent household in childhood was associated with lower bone strength in adulthood. Because peak bone mass is acquired during childhood, bone health may be negatively impacted by childhood socio-environmental disadvantage. The goal of this study was to determine whether being raised in a single-parent household is associated with lower bone strength in adulthood. Using dual-energy X-ray absorptiometry data from 708 participants (mean age 57 years) in the Midlife in the United States Biomarker Project, we examined the independent associations of composite indices of femoral neck bone strength relative to load (in three failure modes: compression, bending, and impact) in adulthood with the experience of single-parent childhood and parental death or divorce in childhood. After adjustment for gender, race, menopause transition stage, age, and body mass index, each additional year of single-parent childhood was associated with 0.02 to 0.03 SD lower indices of adult femoral neck strength. In those with 9-16 years of single-parent childhood, the compression strength index was 0.41 SD lower, bending strength index was 0.31 SD lower, and impact strength index was 0.25 SD lower (all p values < 0.05). In contrast, parental death or divorce during childhood was not by itself independently associated with adult bone strength indices. The magnitudes of these associations were unaltered by additional adjustment for lifestyle factors and socioeconomic status in childhood and adulthood. Independent of parental death or divorce, growing up in a single-parent household is associated with lower femoral neck bone strength in adulthood, and this association is not entirely explained by childhood or adult socioeconomic conditions or lifestyle choices.

Low-grade Glioma Surgery in Intraoperative Magnetic Resonance Imaging: Results of a Multicenter Retrospective Assessment of the German Study Group for Intraoperative Magnetic Resonance Imaging.

PubMed

Coburger, Jan; Merkel, Andreas; Scherer, Moritz; Schwartz, Felix; Gessler, Florian; Roder, Constantin; Pala, Andrej; König, Ralph; Bullinger, Lars; Nagel, Gabriele; Jungk, Christine; Bisdas, Sotirios; Nabavi, Arya; Ganslandt, Oliver; Seifert, Volker; Tatagiba, Marcos; Senft, Christian; Mehdorn, Maximilian; Unterberg, Andreas W; Rössler, Karl; Wirtz, Christian Rainer

2016-06-01

The ideal treatment strategy for low-grade gliomas (LGGs) is a controversial topic. Additionally, only smaller single-center series dealing with the concept of intraoperative magnetic resonance imaging (iMRI) have been published. To investigate determinants for patient outcome and progression-free-survival (PFS) after iMRI-guided surgery for LGGs in a multicenter retrospective study initiated by the German Study Group for Intraoperative Magnetic Resonance Imaging. A retrospective consecutive assessment of patients treated for LGGs (World Health Organization grade II) with iMRI-guided resection at 6 neurosurgical centers was performed. Eloquent location, extent of resection, first-line adjuvant treatment, neurophysiological monitoring, awake brain surgery, intraoperative ultrasound, and field-strength of iMRI were analyzed, as well as progression-free survival (PFS), new permanent neurological deficits, and complications. Multivariate binary logistic and Cox regression models were calculated to evaluate determinants of PFS, gross total resection (GTR), and adjuvant treatment. A total of 288 patients met the inclusion criteria. On multivariate analysis, GTR significantly increased PFS (hazard ratio, 0.44; P < .01), whereas "failed" GTR did not differ significantly from intended subtotal-resection. Combined radiochemotherapy as adjuvant therapy was a negative prognostic factor (hazard ratio: 2.84, P < .01). Field strength of iMRI was not associated with PFS. In the binary logistic regression model, use of high-field iMRI (odds ratio: 0.51, P < .01) was positively and eloquent location (odds ratio: 1.99, P < .01) was negatively associated with GTR. GTR was not associated with increased rates of new permanent neurological deficits. GTR was an independent positive prognostic factor for PFS in LGG surgery. Patients with accidentally left tumor remnants showed a similar prognosis compared with patients harboring only partially resectable tumors. Use of high-field iMRI was significantly associated with GTR. However, the field strength of iMRI did not affect PFS. EoR, extent of resectionFLAIR, fluid-attenuated inversion recoveryGTR, gross total resectionIDH1, isocitrate dehydrogenase 1iMRI, intraoperative magnetic resonance imagingLGG, low-grade gliomaMGMT, methylguanine-deoxyribonucleic acid methyltransferasenPND, new permanent neurological deficitOS, overall survivalPFS, progression-free survivalSTR, subtotal resectionWHO, World Health Organization.

Genome-Wide Association Study Identifies Four Loci Associated with Eruption of Permanent Teeth

PubMed Central

Zhang, Hao; Shaffer, John R.; Hansen, Thomas; Esserlind, Ann-Louise; Boyd, Heather A.; Nohr, Ellen A.; Timpson, Nicholas J.; Fatemifar, Ghazaleh; Paternoster, Lavinia; Evans, David M.; Weyant, Robert J.; Levy, Steven M.; Lathrop, Mark; Smith, George Davey; Murray, Jeffrey C.; Olesen, Jes; Werge, Thomas; Marazita, Mary L.; Sørensen, Thorkild I. A.; Melbye, Mads

2011-01-01

The sequence and timing of permanent tooth eruption is thought to be highly heritable and can have important implications for the risk of malocclusion, crowding, and periodontal disease. We conducted a genome-wide association study of number of permanent teeth erupted between age 6 and 14 years, analyzed as age-adjusted standard deviation score averaged over multiple time points, based on childhood records for 5,104 women from the Danish National Birth Cohort. Four loci showed association at P<5×10−8 and were replicated in four independent study groups from the United States and Denmark with a total of 3,762 individuals; all combined P-values were below 10−11. Two loci agreed with previous findings in primary tooth eruption and were also known to influence height and breast cancer, respectively. The two other loci pointed to genomic regions without any previous significant genome-wide association study results. The intronic SNP rs7924176 in ADK could be linked to gene expression in monocytes. The combined effect of the four genetic variants was most pronounced between age 10 and 12 years, where children with 6 to 8 delayed tooth eruption alleles had on average 3.5 (95% confidence interval: 2.9–4.1) fewer permanent teeth than children with 0 or 1 of these alleles. PMID:21931568

Low Hemoglobin Concentrations Are Associated With Sarcopenia, Physical Performance, and Disability in Older Australian Men in Cross-sectional and Longitudinal Analysis: The Concord Health and Ageing in Men Project.

PubMed

Hirani, Vasant; Naganathan, Vasi; Blyth, Fiona; Le Couteur, David G; Seibel, Markus J; Waite, Louise M; Handelsman, David J; Hsu, Ben; Cumming, Robert G

2016-12-01

The objective of this study is to examine associations between Hb levels and sarcopenia, low muscle strength, functional measures, and activities of daily living (ADL) and instrumental ADL (IADL) disabilities in older Australian men. Men aged 70 years and older (2005-2007) from the Concord Health and Ageing in Men Project were assessed at baseline (n = 1,705), 2 years (n = 1,367), and 5 years (n = 958). The main outcome measurements were walking speed, muscle strength, ADL and IADL disabilities, and sarcopenia using the Foundation for the National Institutes of Health criteria (low appendicular lean mass adjusted for body mass index < 0.789 and poor grip strength < 26kg). Analysis was performed using Hb levels as a continuous measure, unadjusted and adjusted by age, income, body mass index, measures of health, estimated glomerular function, inflammatory markers, and medication use. Receiver operating characteristic curve analysis was performed to determine a threshold of Hb for each outcome. In cross-sectional and longitudinal analysis, for every 1g/dL increase in Hb, there was a significant reduction in risk of sarcopenia, slow walking speed, poor grip strength, inability to perform chair stands, and ADL and IADL disabilities in unadjusted, age-adjusted, and multivariate-adjusted analysis. The highest value of the Youden Index for Hb was 14.2g/dL for sarcopenia and grip strength, 14.5g/dL for walking speed, and 14.4g/dL for all other outcomes. Declines in Hb levels over time are associated with poor functional outcomes. The risks and benefits of interventions to increase Hb among older men warrant further investigation to differentiate whether this is an active contributor to age-related debility or a passive biomarker of it. © The Author 2016. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Tibia and radius bone geometry and volumetric density in obese compared to non-obese adolescents.

PubMed

Leonard, Mary B; Zemel, Babette S; Wrotniak, Brian H; Klieger, Sarah B; Shults, Justine; Stallings, Virginia A; Stettler, Nicolas

2015-04-01

Childhood obesity is associated with biologic and behavioral characteristics that may impact bone mineral density (BMD) and structure. The objective was to determine the association between obesity and bone outcomes, independent of sexual and skeletal maturity, muscle area and strength, physical activity, calcium intake, biomarkers of inflammation, and vitamin D status. Tibia and radius peripheral quantitative CT scans were obtained in 91 obese (BMI>97th percentile) and 51 non-obese adolescents (BMI>5th and <85th percentiles). Results were converted to sex- and race-specific Z-scores relative to age. Cortical structure, muscle area and muscle strength (by dynamometry) Z-scores were further adjusted for bone length. Obese participants had greater height Z-scores (p<0.001), and advanced skeletal maturity (p<0.0001), compared with non-obese participants. Tibia cortical section modulus and calf muscle area Z-scores were greater in obese participants (1.07 and 1.63, respectively, both p<0.0001). Tibia and radius trabecular and cortical volumetric BMD did not differ significantly between groups. Calf muscle area and strength Z-scores, advanced skeletal maturity, and physical activity (by accelerometry) were positively associated with tibia cortical section modulus Z-scores (all p<0.01). Adjustment for muscle area Z-score attenuated differences in tibia section modulus Z-scores between obese and non-obese participants from 1.07 to 0.28. After multivariate adjustment for greater calf muscle area and strength Z-scores, advanced maturity, and less moderate to vigorous physical activity, tibia section modulus Z-scores were 0.32 (95% CI -0.18, 0.43, p=0.06) greater in obese, vs. non-obese participants. Radius cortical section modulus Z-scores were 0.45 greater (p=0.08) in obese vs. non-obese participants; this difference was attenuated to 0.14 with adjustment for advanced maturity. These findings suggest that greater tibia cortical section modulus in obese adolescents is attributable to advanced skeletal maturation and greater muscle area and strength, while less moderate to vigorous physical activities offset the positive effects of these covariates. The impact of obesity on cortical structure was greater at weight bearing sites. Copyright © 2014 Elsevier Inc. All rights reserved.

Muscle strength and body composition are clinical indicators of osteoporosis.

PubMed

Rikkonen, Toni; Sirola, Joonas; Salovaara, Kari; Tuppurainen, Marjo; Jurvelin, Jukka S; Honkanen, Risto; Kröger, Heikki

2012-08-01

We examined the role of muscle strength, lean tissue distribution, and overall body composition as indicators of osteoporosis (OP) in a pooled sample of 979 Finnish postmenopausal women (mean age 68.1 years) from the Kuopio Osteoporosis Risk Factor and Prevention study. Bone mineral density (BMD) at the femoral neck (FN) and total body composition were assessed by dual-energy X-ray absorptiometry scans. The women (n = 979) were divided into three groups according to WHO criteria, based on FN BMD T score: normal (n = 474), osteopenia (n = 468), and OP (n = 37). Soft tissue proportions, fat mass index (FMI, fat/height²), lean mass index (LMI, lean/height²), and appendicular skeletal muscle mass (ASM, (arms + legs)/height²) were calculated. Handgrip and knee extension strength measurements were made. OP subjects had significantly smaller LMI (p = 0.001), ASM (p = 0.001), grip strength (p < 0.0001), and knee extension strength (p < 0.05) but not FMI (p > 0.05) compared to other subjects. Grip and knee extension strength were 19 and 16 % weaker in OP women compared to others, respectively. The area under the receiver operating characteristic curve was 69 % for grip and 71 % for knee extension strength. In tissue proportions only LMI showed predictive power (63 %, p = 0.016). An overall linear association of LMI (R² = 0.007, p = 0.01) and FMI (R² = 0.028, p < 0.001) with FN BMD remained significant. In the multivariate model, after adjusting for age, grip strength, leg extension strength, FMI, LMI, number of medications, alcohol consumption, current smoking, dietary calcium intake, and hormone therapy, grip strength (adjusted OR = 0.899, 95 % CI 0.84-0.97, p < 0.01), leg extension strength (OR = 0.998, 95 % CI 0.99-1, p < 0.05), and years of hormone therapy (OR = 0.905, 95 % CI 0.82-1, p < 0.05) remained as significant determinants of OP. Muscle strength tests, especially grip strength, serve as an independent and useful tool for postmenopausal OP risk assessment. In addition, lean mass contributes to OP in this age group. Muscle strength and lean mass should be considered separately since both are independently associated with postmenopausal BMD.

Diagnoses Treated in Ambulatory Care Among Homeless-Experienced Veterans: Does Supported Housing Matter?

PubMed

Gabrielian, Sonya; Yuan, Anita H; Andersen, Ronald M; Gelberg, Lillian

2016-10-01

Little is known about how permanent supported housing influences ambulatory care received by homeless persons. To fill this gap, we compared diagnoses treated in VA Greater Los Angeles (VAGLA) ambulatory care between Veterans who are formerly homeless-now housed/case managed through VA Supported Housing ("VASH Veterans")-and currently homeless. We performed secondary database analyses of homeless-experienced Veterans (n = 3631) with VAGLA ambulatory care use from October 1, 2010 to September 30, 2011. We compared diagnoses treated-adjusting for demographics and need characteristics in regression analyses-between VASH Veterans (n = 1904) and currently homeless Veterans (n = 1727). On average, considering 26 studied diagnoses, VASH (vs currently homeless) Veterans received care for more (P < .05) diagnoses (mean = 2.9/1.7). Adjusting for demographics and need characteristics, VASH Veterans were more likely (P < .05) than currently homeless Veterans to receive treatment for diagnoses across categories: chronic physical illness, acute physical illness, mental illness, and substance use disorders. Specifically, VASH Veterans had 2.5, 1.7, 2.1, and 1.8 times greater odds of receiving treatment for at least 2 condition in these categories, respectively. Among participants treated for chronic illnesses, adjusting for predisposing and need characteristics, VASH (vs currently homeless) Veterans were 9%, 8%, and 11% more likely to have 2 or more visits for chronic physical illnesses, mental illnesses, and substance use disorder, respectively. Among homeless-experienced Veterans, permanent supported housing may reduce disparities in the treatment of diagnoses commonly seen in ambulatory care. © The Author(s) 2016.

Electron Beam Brazing of Titanium for Construction in Space

NASA Technical Reports Server (NTRS)

Flom, Yury

2006-01-01

An extended presence of humans in space requires an in-situ capability to construct various permanent structures to support scientific research, power generation, communication, radiation shielding and other functions. Electron Beam (EB) vacuum brazing has been identified as one of the best joining processes for in-space joining, particular for making a large quantity of permanent joints as required for construction of the sizeable truss structures. Thin wall titanium tubes are perhaps the best choice because of their high stiffness, excellent strength-to-weight ratio and great metal forming and joining ability. An innovative EB vacuum spot brazing process is being developed at Goddard Space Flight Center to be used for robotic as well as human-assisted construction in space. This paper describes experimental results obtained during the initial effort of EB brazing of titanium tubes with the special emphasis on low temperature aluminum filler metals.

PubMed Central

DE LUCIA, A.; PASTORE, V.; BRACCI LAUDIERO, L.; BUONISSIMO, I.; RICCI, G.

2016-01-01

SUMMARY Programmes for early childhood childhood hearing impairment identification allows to quickly start the appropriate hearing aid fitting and rehabilitation process; nevertheless, a large number of patients do not join the treatment program. The goal of this article is to present the results of a strategic review of the strengths, weaknesses, opportunities and threats connected with the audiologic/prosthetic/language follow-up process of children with bilateral permanent hearing impairment. Involving small children, the follow-up includes the involvement of specialised professionals of a multidisciplinary team and a complex and prolonged multi-faced management. Within the framework of the Italian Ministry of Health project CCM 2013 "Preventing Communication Disorders: a Regional Program for Early Identification, Intervention and Care of Hearing Impaired Children", the purpose of this analysis was to propose recommendations that can harmonise criteria for outcome evaluation and provide guidance on the most appropriate assessment methods to be used in the follow-up course of children with permanent hearing impairment. PMID:27054392

Multi-Finger Interaction and Synergies in Finger Flexion and Extension Force Production

PubMed Central

Park, Jaebum; Xu, Dayuan

2017-01-01

The aim of this study was to discover finger interaction indices during single-finger ramp tasks and multi-finger coordination during a steady state force production in two directions, flexion, and extension. Furthermore, the indices of anticipatory adjustment of elemental variables (i.e., finger forces) prior to a quick pulse force production were quantified. It is currently unknown whether the organization and anticipatory modulation of stability properties are affected by force directions and strengths of in multi-finger actions. We expected to observe a smaller finger independency and larger indices of multi-finger coordination during extension than during flexion due to both neural and peripheral differences between the finger flexion and extension actions. We also examined the indices of the anticipatory adjustment between different force direction conditions. The anticipatory adjustment could be a neural process, which may be affected by the properties of the muscles and by the direction of the motions. The maximal voluntary contraction (MVC) force was larger for flexion than for extension, which confirmed the fact that the strength of finger flexor muscles (e.g., flexor digitorum profundus) was larger than that of finger extensor (e.g., extensor digitorum). The analysis within the uncontrolled manifold (UCM) hypothesis was used to quantify the motor synergy of elemental variables by decomposing two sources of variances across repetitive trials, which identifies the variances in the uncontrolled manifold (VUCM) and that are orthogonal to the UCM (VORT). The presence of motor synergy and its strength were quantified by the relative amount of VUCM and VORT. The strength of motor synergies at the steady state was larger in the extension condition, which suggests that the stability property (i.e., multi-finger synergies) may be a direction specific quantity. However, the results for the existence of anticipatory adjustment; however, no difference between the directional conditions suggests that feed-forward synergy adjustment (changes in the stability property) may be at least independent of the magnitude of the task-specific apparent performance variables and its direction (e.g., flexion and extension forces). PMID:28674489

SORPTION OF CU AND ZN TO KAOLINITE AND IRON OXIDE: EFFECTS OF HUMIC ACID AND IONIC STRENGTH AND IMPLICATIONS FOR STORMWATER RUNOFF

EPA Science Inventory

Heavy metals are common pollutants in wet weather flows and urban waterways. Changes in ionic strength, whether from mixing with saline waters, road salt, or from the large osmotic adjustment needed for the Microtox toxicity assay, affect the aqueous chemistry of stormwater runof...

Top-Down Management: An Effective Tool in Higher Education?

ERIC Educational Resources Information Center

Tsai, Yau; Beverton, Sue

2007-01-01

Purpose: The purpose of this paper is to explore the strengths and weaknesses of top-down management in a university that has embraced globalisation with a strong market-led ethos and to suggest the ways in which adjustments might be made to top-down management processes. Design/methodology/approach: The paper examines the strengths and weaknesses…

[Health-based risk adjustment. Effects and side effects].

PubMed

Jahn, R; Schillo, S; Wasem, J

2012-05-01

Numerous health systems have introduced competition between health plans while banning risk-rated premiums. Risk adjustment for health plans is introduced to reduce incentives for risk selection and to create incentives for health plans to permanently invest in care for the chronically ill. According to the international health economics state of the art, risk adjustment in the German social health insurance system has used information on health status (measured by diagnoses and drug prescriptions) on top of demographic information since 2009. In non-competitive health care systems similar mechanisms are sometimes established, e.g. to achieve an equitable distribution of resources between regions. An evaluation of the first year of health-based risk adjustment demonstrates a superior performance in comparison to the old, demographic risk adjustment. The old risk adjustment formula (without ex post high-cost pooling) showed R(2) of 5.8%, CPM of 10.4% and MAPE of 2,226 €, in contrast to the new health status-based risk adjustment formula (without cash benefit for sick allowance) which reaches R(2) 20.2%, CPM 22.5% and MAPE 1,817 €. However, to make competition between health plans functional for improvement of quality and efficiency of health care, health plans must be granted additional instruments to act as prudent buyers of health care.

A simplified, low power system for effective vessel sealing

NASA Astrophysics Data System (ADS)

Lyle, Allison B.; Kennedy, Jenifer S.; Schmaltz, Dale F.; Kennedy, Aaron S.

2015-03-01

The first bipolar vessel sealing system was developed nearly 15 years ago and has since become standard of care in surgery. These systems make use of radio frequency current that is delivered between bipolar graspers to permanently seal arteries, veins and tissue bundles. Conventional vessel sealing generators are based off traditional electrosurgery generator architecture and deliver high power (150-300 Watts) and high current using complex control and sense algorithms to adjust the output for vessel sealing applications. In recent years, a need for small-scale surgical vessel sealers has developed as surgeons strive to further reduce their footprint on patients. There are many technical challenges associated with miniaturization of vessel sealing devices including maintaining electrical isolation while delivering high current in a saline environment. Research into creating a small, 3mm diameter vessel sealer revealed that a highly simplified generator system could be used to achieve excellent results and subsequently a low power vessel sealing system was developed. This system delivers 25 Watts constant power while limiting voltage (<= Vrms) and current (<= Amps) until an impedance endpoint is achieved, eliminating the use of complicated control and sensing software. The result is optimized tissue effect, where high seal strength is maintained (> 360mmHg), but seal times (1.7 +/- 0.7s versus 4.1 +/- 0.7s), thermal spread (<1mm vs <=2mm) and total energy delivery are reduced, when compared to an existing high power system.

A Rotating Coil Apparatus with Sub-Micrometer Magnetic Center Measurement Stability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spencer, Cherrill M.; Anderson, Scott, D.; Jensen, David R.

2005-12-02

A rotating double coil apparatus has been designed and built so that the relative magnetic center change of a quadrupole is measured to an uncertainty smaller than 0.02 micrometers (=micron, {micro}m) for a single measurement. Furthermore, repeated measurements over about an hour vary by less than 0.1 {micro}m and by less than 1 {micro}m for periods of 24 hrs or longer. Correlation analyses of long data runs show that the magnet center measurement is sensitive to mechanical effects, such as vibration and rotating part wear, as well as to environmental effects, such as temperature and relative humidity. Evolving apparatus designmore » has minimized mechanical noise and environmental isolation has reduced the effects of the surrounding environment so that sub-micron level measurement uncertainties and micron level stability have been achieved for multi-day measurement periods. Apparatus design evolution will be described in detail and correlation data taken on water-cooled electromagnet and adjustable permanent quadrupoles, which are about 350 mm in overall length, will be shown. These quads were prototypes for the linac quads of the Next Linear Collider (NLC) that had to meet the requirement that their magnetic centers change less than 1 micron during a 20% change in field strength. Thus it was necessary to develop an apparatus that could track the magnetic center with a fraction of a micron uncertainty.« less

Elliptically polarizing adjustable phase insertion device

DOEpatents

Carr, R.

1995-01-17

An insertion device for extracting polarized electromagnetic energy from a beam of particles is disclosed. The insertion device includes four linear arrays of magnets which are aligned with the particle beam. The magnetic field strength to which the particles are subjected is adjusted by altering the relative alignment of the arrays in a direction parallel to that of the particle beam. Both the energy and polarization of the extracted energy may be varied by moving the relevant arrays parallel to the beam direction. The present invention requires a substantially simpler and more economical superstructure than insertion devices in which the magnetic field strength is altered by changing the gap between arrays of magnets. 3 figures.

Preliminary Results of Performance Measurements on a Cylindrical Hall-Effect Thruster with Magnetic Field Generated by Permanent Magnets

NASA Technical Reports Server (NTRS)

Polzin, K. A.; Raitses, Y.; Merino, E.; Fisch, N. J.

2008-01-01

The performance of a low-power cylindrical Hall thruster, which more readily lends itself to miniaturization and low-power operation than a conventional (annular) Hall thruster, was measured using a planar plasma probe and a thrust stand. The field in the cylindrical thruster was produced using permanent magnets, promising a power reduction over previous cylindrical thruster iterations that employed electromagnets to generate the required magnetic field topology. Two sets of ring-shaped permanent magnets are used, and two different field configurations can be produced by reorienting the poles of one magnet relative to the other. A plasma probe measuring ion flux in the plume is used to estimate the current utilization for the two magnetic configurations. The measurements indicate that electron transport is impeded much more effectively in one configuration, implying a higher thrust efficiency. Preliminary thruster performance measurements on this configuration were obtained over a power range of 100-250 W. The thrust levels over this power range were 3.5-6.5 mN, with anode efficiencies and specific impulses spanning 14-19% and 875- 1425 s, respectively. The magnetic field in the thruster was lower for the thrust measurements than the plasma probe measurements due to heating and weakening of the permanent magnets, reducing the maximum field strength from 2 kG to roughly 750-800 G. The discharge current levels observed during thrust stand testing were anomalously high compared to those levels measured in previous experiments with this thruster.

Shear bond strength of one-step self-etch adhesives: pH influence

PubMed Central

Poggio, Claudio; Beltrami, Riccardo; Scribante, Andrea; Colombo, Marco; Chiesa, Marco

2015-01-01

Background: The aim of this study was to compare the shear bond strength of four one-step self-etch adhesives with different pH values to enamel and dentin. Materials and Methods: In this in vitro study, 200 bovine permanent mandibular incisors were used. Four one-step self-etch adhesives with different pH values were tested both on enamel and on dentin: Adper™ Easy Bond Self-Etch Adhesive (pH = 0.8-1), Futurabond NR (pH=2), G-aenial Bond (pH = 1.5), Clearfil S3 Bond (pH = 2.7). After adhesive systems application, a nanohybrid composite resin was inserted into the bonded surface. The specimens were placed in a universal testing machine. The shear bond strength was performed at a cross-head speed of 1 mm/min until the sample rupture. The shear bond strength values (MPa) of the different groups were compared with analysis of variance after that Kolmogorov and Smirnov tests were applied to assess normality of distributions. P < 0.05 was considered as significant. Results: In enamel shear bond strength, the highest shear bond strength values were reported with Futurabond NR (P < 0.01); however, no significant differences were found with Clearfil S3 Bond. The others adhesive systems showed lower shear bond strength values with significant differences between them (P < 0.05). When comparing the dentin shear bond strength, the lowest shear bond strength values were reported with Clearfil S3 Bond (P < 0.05), while there were no significant differences among the other three products (P > 0.05). Conclusion: The pH values of adhesive systems did not influence significantly their shear bond strength to enamel or dentin. PMID:26005459

The Adsorption of Bromide Ion at Mercury from Propylene Carbonate Solutions of Constant Ionic Strength

DTIC Science & Technology

1991-05-20

Chemistry University of California Davis, CA 95616 * To whom correspondence should be addressed. t Permanent address: Instituto de Fisica e Quimica ...I]. In the case of Br- ion adsorption at Hg, studies have been carried out in water [2-4] and N- methylformamide solutions [5,6] of both varying and...discussed with respect to current theoretical developments. 4 Experimental Differential capacity against potential data were obtained for the mercury

The 13th Aerospace Mechanisms Symposium

NASA Technical Reports Server (NTRS)

Bond, A. C.

1979-01-01

Technological areas covered include propulsion, motion compensation, instrument pointing and adjustment, centrifuge testing, bearing design, vehicle braking, and cargo handling. Devices for satellite, missile, and hypersonic-wind-tunnel applications; space shuttle mechanical and thermal protection systems; and techniques for building large space structures are described. In addition, a fluid drop injector device for a Spacelab experiment, a helical grip for cable cars, and applications of rare earth permanent magnets are discussed.

Model of heterogeneous material dissolution in simulated biological fluid

NASA Astrophysics Data System (ADS)

Knyazeva, A. G.; Gutmanas, E. Y.

2015-11-01

In orthopedic research, increasing attention is being paid to bioresorbable/biodegradable implants as an alternative to permanent metallic bone healing devices. Biodegradable metal based implants possessing high strength and ductility potentially can be used in load bearing sites. Biodegradable Mg and Fe are ductile and Fe possess high strength, but Mg degrades too fast and Fe degrades too slow, Ag is a noble metal and should cause galvanic corrosion of the more active metallic iron - thus, corrosion of Fe can be increased. Nanostructuring should results in higher strength and can result in higher rate of dissolution/degradation from grain boundaries. In this work, a simple dissolution model of heterogeneous three phase nanocomposite material is considered - two phases being metal Fe and Ag and the third - nanopores. Analytical solution for the model is presented. Calculations demonstrate that the changes in the relative amount of each phase depend on mass exchange and diffusion coefficients. Theoretical results agree with preliminary experimental results.

Electric field induced sheeting and breakup of dielectric liquid jets

NASA Astrophysics Data System (ADS)

Khoshnevis, Ahmad; Tsai, Scott S. H.; Esmaeilzadeh, Esmaeil

2014-01-01

We report experimental observations of the controlled deformation of a dielectric liquid jet subjected to a local high-voltage electrostatic field in the direction normal to the jet. The jet deforms to the shape of an elliptic cylinder upon application of a normal electrostatic field. As the applied electric field strength is increased, the elliptic cylindrical jet deforms permanently into a flat sheet, and eventually breaks-up into droplets. We interpret this observation—the stretch of the jet is in the normal direction to the applied electric field—qualitatively using the Taylor-Melcher leaky dielectric theory, and develop a simple scaling model that predicts the critical electric field strength for the jet-to-sheet transition. Our model shows a good agreement with experimental results, and has a form that is consistent with the classical drop deformation criterion in the Taylor-Melcher theory. Finally, we statistically analyze the resultant droplets from sheet breakup, and find that increasing the applied electric field strength improves droplet uniformity and reduces droplet size.

Comparison of polymer-based temporary crown and fixed partial denture materials by diametral tensile strength.

PubMed

Ha, Seung-Ryong; Yang, Jae-Ho; Lee, Jai-Bong; Han, Jung-Suk; Kim, Sung-Hun

2010-03-01

The purpose of this study was to investigate the diametral tensile strength of polymer-based temporary crown and fixed partial denture (FPD) materials, and the change of the diametral tensile strength with time. One monomethacrylate-based temporary crown and FPD material (Trim) and three dimethacrylate-based ones (Protemp 3 Garant, Temphase, Luxtemp) were investigated. 20 specimens (ø 4 mm × 6 mm) were fabricated and randomly divided into two groups (Group I: Immediately, Group II: 1 hour) according to the measurement time after completion of mixing. Universal Testing Machine was used to load the specimens at a cross-head speed of 0.5 mm/min. The data were analyzed using one-way ANOVA, the multiple comparison Scheffe test and independent sample t test (α = 0.05). Trim showed severe permanent deformation without an obvious fracture during loading at both times. There were statistically significant differences among the dimethacrylate-based materials. The dimethacrylate-based materials presented an increase in strength from 5 minutes to 1 hour and were as follows: Protemp 3 Garant (23.16 - 37.6 MPa), Temphase (22.27 - 28.08 MPa), Luxatemp (14.46 - 20.59 MPa). Protemp 3 Garant showed the highest value. The dimethacrylate-based temporary materials tested were stronger in diametral tensile strength than the monomethacrylate-based one. The diametral tensile strength of the materials investigated increased with time.

Effects of dentin surface treatments on shear bond strength of glass-ionomer cements

PubMed Central

Poggio, Claudio; Beltrami, Riccardo; Scribante, Andrea; Colombo, Marco; Lombardini, Marco

2014-01-01

Summary Aim The aim of this in vitro study was to evaluate the effect of different surface treatments on shear bond strength of a conventional glass-ionomer cement (GIC) and a resin-modified glass-ionomer cement (RMGIC) to dentin. Materials and methods 80 bovine permanent incisors were used. 40 cylindrical specimens of a GIC (Fuji IX GP Extra) and 40 cylindrical specimens of a RMGIC (Fuji II LC) were attached to the dentin. The teeth were then randomly assigned to 8 groups of equal size (n=10), 4 for every type of glass-ionomer cement, corresponding to type of dentin surface treatments. Group 1: GC Cavity Conditioner; Group 2: 37% phosphoric acid gel; Group 3: Clearfil SE Bond; Group 4: no dentin conditioning (control). The specimens were placed in a universal testing machine (Model 3343, Instron Corp., Canton, Mass., USA) and subsequently tested for shear bond strength (MPa). Results ANOVA showed the presence of significant differences among the various groups. Post hoc Tukey test showed different values of shear bond strength for Fuji IX GP Extra and for Fuji II LC. The different conditioners variably influence the adhesion of the glass-ionomer cements tested. Conclusions. RMGIC shear bond to dentin was higher than GIC. The use of a Self-etch adhesive system improved the shear bond strength values of RMGIC and lowered the shear bond strength values of GIC significantly. PMID:24753797

Knee extensor strength and body weight in adolescent men and the risk of knee osteoarthritis by middle age.

PubMed

Turkiewicz, Aleksandra; Timpka, Simon; Thorlund, Jonas Bloch; Ageberg, Eva; Englund, Martin

2017-10-01

To assess the extent to which knee extensor strength and weight in adolescence are associated with knee osteoarthritis (OA) by middle age. We studied a cohort of 40 121 men who at age 18 years in 1969/1970 underwent mandatory conscription in Sweden. We retrieved data on isometric knee extensor strength, weight, height, smoking, alcohol consumption, parental education and adult occupation from Swedish registries. We identified participants diagnosed with knee OA or knee injury from 1987 to 2010 through the National Patient Register. We estimated the HR of knee OA using multivariable-adjusted Cox proportional regression model. To assess the influence of adult knee injury and occupation, we performed a formal mediation analysis. The mean (SD) knee extensor strength was 234 (47) Nm, the mean (SD) weight was 66 (9.3) kg. During 24 years (median) of follow-up starting at the age of 35 years, 2049 persons were diagnosed with knee OA. The adjusted HR (95% CI) of incident knee OA was 1.12 (1.06 to 1.18) for each SD of knee extensor strength and 1.18 (1.15 to 1.21) per 5 kg of body weight. Fifteen per cent of the increase in OA risk due to higher knee extensor strength could be attributed to knee injury and adult occupation. Higher knee extensor strength in adolescent men was associated with increased risk of knee OA by middle age, challenging the current tenet of low muscle strength being a risk factor for OA. We confirmed higher weight to be a strong risk factor for knee OA. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Approximation-Based Discrete-Time Adaptive Position Tracking Control for Interior Permanent Magnet Synchronous Motors.

PubMed

Yu, Jinpeng; Shi, Peng; Yu, Haisheng; Chen, Bing; Lin, Chong

2015-07-01

This paper considers the problem of discrete-time adaptive position tracking control for a interior permanent magnet synchronous motor (IPMSM) based on fuzzy-approximation. Fuzzy logic systems are used to approximate the nonlinearities of the discrete-time IPMSM drive system which is derived by direct discretization using Euler method, and a discrete-time fuzzy position tracking controller is designed via backstepping approach. In contrast to existing results, the advantage of the scheme is that the number of the adjustable parameters is reduced to two only and the problem of coupling nonlinearity can be overcome. It is shown that the proposed discrete-time fuzzy controller can guarantee the tracking error converges to a small neighborhood of the origin and all the signals are bounded. Simulation results illustrate the effectiveness and the potentials of the theoretic results obtained.

Combined coagulation-flocculation and sequencing batch reactor with phosphorus adjustment for the treatment of high-strength landfill leachate: experimental kinetics and chemical oxygen demand fractionation.

PubMed

El-Fadel, M; Matar, F; Hashisho, J

2013-05-01

The treatability of high-strength landfill leachate is challenging and relatively limited. This study examines the feasibility of treating high-strength landfill leachate (chemical oxygen demand [COD]: 7,760-11,770 mg/L, biochemical oxygen demand [BOD5]: 2,760-3,569 mg/L, total nitrogen [TN] = 980-1,160 mg/L) using a sequencing batch reactor (SBR) preceded by a coagulation-flocculation process with phosphorus nutritional balance under various mixing and aeration patterns. Simulations were also conducted to define kinetic parameters and COD fractionation. Removal efficiencies reached 89% for BOD5, 60% for COD, and 72% for TN, similar to and better than reported studies, albeit with a relatively lower hydraulic retention time (HRT) and solid retention time (SRT). The coupled experimental and simulation results contribute in filling a gap toward managing high-strength landfill leachate and providing guidelines for corresponding SBR applications. The treatability of high-strength landfill leachate, which is challenging and relatively limited, was demonstrated using a combined coagulation-flocculation with SBR technology and nutrient balance adjustment. The most suitable coagulant, kinetic design parameters, and COD fractionation were defined using coupled experimental and simulation results contributing in filling a gap toward managing high-strength leachate by providing guidelines for corresponding SBR applications and anticipating potential constraints related to the non-biodegradable COD fraction. In this context, while the combined coagulation-flocculation and SBR process improved removal efficiencies, posttreatment may be required for high-strength leachate, depending on discharge standards and ultimate usage of the treated leachate.

Determination of prescription dose for Cs-131 permanent implants using the BED formalism including resensitization correction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Luo, Wei, E-mail: wei.luo@uky.edu; Molloy, Janelle; Aryal, Prakash

2014-02-15

Purpose: The current widely used biological equivalent dose (BED) formalism for permanent implants is based on the linear-quadratic model that includes cell repair and repopulation but not resensitization (redistribution and reoxygenation). The authors propose a BED formalism that includes all the four biological effects (4Rs), and the authors propose how it can be used to calculate appropriate prescription doses for permanent implants with Cs-131. Methods: A resensitization correction was added to the BED calculation for permanent implants to account for 4Rs. Using the same BED, the prescription doses with Au-198, I-125, and Pd-103 were converted to the isoeffective Cs-131 prescriptionmore » doses. The conversion factor F, ratio of the Cs-131 dose to the equivalent dose with the other reference isotope (F{sub r}: with resensitization, F{sub n}: without resensitization), was thus derived and used for actual prescription. Different values of biological parameters such as α, β, and relative biological effectiveness for different types of tumors were used for the calculation. Results: Prescription doses with I-125, Pd-103, and Au-198 ranging from 10 to 160 Gy were converted into prescription doses with Cs-131. The difference in dose conversion factors with (F{sub r}) and without (F{sub n}) resensitization was significant but varied with different isotopes and different types of tumors. The conversion factors also varied with different doses. For I-125, the average values of F{sub r}/F{sub n} were 0.51/0.46, for fast growing tumors, and 0.88/0.77 for slow growing tumors. For Pd-103, the average values of F{sub r}/F{sub n} were 1.25/1.15 for fast growing tumors, and 1.28/1.22 for slow growing tumors. For Au-198, the average values of F{sub r}/F{sub n} were 1.08/1.25 for fast growing tumors, and 1.00/1.06 for slow growing tumors. Using the biological parameters for the HeLa/C4-I cells, the averaged value of F{sub r} was 1.07/1.11 (rounded to 1.1), and the averaged value of F{sub n} was 1.75/1.18. F{sub r} of 1.1 has been applied to gynecological cancer implants with expected acute reactions and outcomes as expected based on extensive experience with permanent implants. The calculation also gave the average Cs-131 dose of 126 Gy converted from the I-125 dose of 144 Gy for prostate implants. Conclusions: Inclusion of an allowance for resensitization led to significant dose corrections for Cs-131 permanent implants, and should be applied to prescription dose calculation. The adjustment of the Cs-131 prescription doses with resensitization correction for gynecological permanent implants was consistent with clinical experience and observations. However, the Cs-131 prescription doses converted from other implant doses can be further adjusted based on new experimental results, clinical observations, and clinical outcomes.« less

Determination of prescription dose for Cs-131 permanent implants using the BED formalism including resensitization correction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Luo, Wei, E-mail: wei.luo@uky.edu; Molloy, Janelle; Aryal, Prakash

Purpose: The current widely used biological equivalent dose (BED) formalism for permanent implants is based on the linear-quadratic model that includes cell repair and repopulation but not resensitization (redistribution and reoxygenation). The authors propose a BED formalism that includes all the four biological effects (4Rs), and the authors propose how it can be used to calculate appropriate prescription doses for permanent implants with Cs-131. Methods: A resensitization correction was added to the BED calculation for permanent implants to account for 4Rs. Using the same BED, the prescription doses with Au-198, I-125, and Pd-103 were converted to the isoeffective Cs-131 prescriptionmore » doses. The conversion factor F, ratio of the Cs-131 dose to the equivalent dose with the other reference isotope (F{sub r}: with resensitization, F{sub n}: without resensitization), was thus derived and used for actual prescription. Different values of biological parameters such as α, β, and relative biological effectiveness for different types of tumors were used for the calculation. Results: Prescription doses with I-125, Pd-103, and Au-198 ranging from 10 to 160 Gy were converted into prescription doses with Cs-131. The difference in dose conversion factors with (F{sub r}) and without (F{sub n}) resensitization was significant but varied with different isotopes and different types of tumors. The conversion factors also varied with different doses. For I-125, the average values of F{sub r}/F{sub n} were 0.51/0.46, for fast growing tumors, and 0.88/0.77 for slow growing tumors. For Pd-103, the average values of F{sub r}/F{sub n} were 1.25/1.15 for fast growing tumors, and 1.28/1.22 for slow growing tumors. For Au-198, the average values of F{sub r}/F{sub n} were 1.08/1.25 for fast growing tumors, and 1.00/1.06 for slow growing tumors. Using the biological parameters for the HeLa/C4-I cells, the averaged value of F{sub r} was 1.07/1.11 (rounded to 1.1), and the averaged value of F{sub n} was 1.75/1.18. F{sub r} of 1.1 has been applied to gynecological cancer implants with expected acute reactions and outcomes as expected based on extensive experience with permanent implants. The calculation also gave the average Cs-131 dose of 126 Gy converted from the I-125 dose of 144 Gy for prostate implants. Conclusions: Inclusion of an allowance for resensitization led to significant dose corrections for Cs-131 permanent implants, and should be applied to prescription dose calculation. The adjustment of the Cs-131 prescription doses with resensitization correction for gynecological permanent implants was consistent with clinical experience and observations. However, the Cs-131 prescription doses converted from other implant doses can be further adjusted based on new experimental results, clinical observations, and clinical outcomes.« less

Teacher Learning through Self-Regulation: An Exploratory Study of Alternatively Prepared Teachers' Ability to Plan Differentiated Instruction in an Urban Elementary School

ERIC Educational Resources Information Center

Tricarico, Katie; Yendol-Hoppey, Diane

2012-01-01

Differentiated Instruction (DI) is an approach that recognizes the strengths and weaknesses of diverse learners and requires the teacher to base instructional accommodations on student strengths and weaknesses. Specifically, teachers use DI strategies to adjust the content, process, or product of instruction depending on student needs. Given the…

Comparison of performance-based measures among native Japanese, Japanese-Americans in Hawaii and Caucasian women in the United States, ages 65 years and over: a cross-sectional study

PubMed Central

Aoyagi, Kiyoshi; Ross, Philip D; Nevitt, Michael C; Davis, James W; Wasnich, Richard D; Hayashi, Takuo; Takemoto, Tai-ichiro

2001-01-01

Background Japanese (both in Japan and Hawaii) have a lower incidence of falls and of hip fracture than North American and European Caucasians, but the reasons for these differences are not clear. Subjects and Methods A cross-sectional study. We compared neuromuscular risk factors for falls using performance-based measures (chair stand time, usual and rapid walking speed, and grip strength) among 163 Japanese women in Japan, 681 Japanese-American women in Hawaii and 9403 Caucasian women in the United States aged 65 years and over. Results After adjusting for age, the Caucasian women required about 40% more time to complete 5 chair stands than either group of Japanese. Walking speed was about 10% slower among Caucasians than native Japanese, whereas Japanese-American women in Hawaii walked about 11% faster than native Japanese. Grip strength was greatest in Japan, which may reflect the rural farming district that this sample was drawn from. Additional adjustment for height, weight or body mass index increased the adjusted means of chair stand time and grip strength among Japanese, but the differences remained significant. Conclusions Both native Japanese and Japanese-American women in Hawaii performed better than Caucasians on chair stand time and walking speed tests, and native Japanese had greater grip strength than Japanese in Hawaii and Caucasians. The biological implications of these differences in performance are uncertain, but may be useful in planning future comparisons between populations. PMID:11696243

Loss of permanent employment and its association with suicidal ideation: a cohort study in South Korea.

PubMed

Yoon, Seohyun; Kim, Ja Young; Park, Jooyoung; Kim, Seung-Sup

2017-09-01

Objective Precarious employment is associated with worse mental health, but it is unclear whether changes in employment status are related to suicidal behaviors. This study examined the association between change in employment status and suicidal ideation among workers in South Korea. Methods To maximize power of the analysis, we combined data from the ongoing Korean Welfare Panel Study. We analyzed 3793 participants who were permanent workers at baseline (2011-2014) and who either: (i) maintained permanent employment; (ii) became a full-time precarious worker; (iii) became a part-time precarious worker; or (iv) became unemployed in the following year (2012-2015). Suicidal ideation was assessed annually by asking participants, "Have you ever seriously thought about dying by suicide in the past year?" Logistic regression was applied to examine associations between change in employment status and suicidal ideation, adjusting for potential confounders such as lifetime suicidal ideation and depressive symptoms at baseline. Results Participants who became part-time precarious workers were more likely to have suicidal ideation [odd ratio (OR) 2.37, 95% confidence interval (95% CI) 1.07-5.25, P=0.033] compared to those who remained permanent workers. In analysis restricted to workers who never previously thought about dying by suicide, suicidal ideation was more common among those who became either full-time (OR 2.33, 95% CI 1.09-4.99, P=0.029) or part-time (OR 3.94, 95% CI 1.46-10.64, P=0.007) precarious workers. Conclusions Our findings suggest that change in employment status from permanent to precarious employment may increase suicidal ideation among workers in South Korea.

Effect of additional etching and ethanol-wet bonding on the dentin bond strength of one-step self-etch adhesives

PubMed Central

Ahn, Joonghee; Jung, Kyoung-Hwa; Son, Sung-Ae; Hur, Bock; Kwon, Yong-Hoon

2015-01-01

Objectives This study examined the effects of additional acid etching on the dentin bond strength of one-step self-etch adhesives with different compositions and pH. The effect of ethanol wetting on etched dentin bond strength of self-etch adhesives was also evaluated. Materials and Methods Forty-two human permanent molars were classified into 21 groups according to the adhesive types (Clearfil SE Bond [SE, control]; G-aenial Bond [GB]; Xeno V [XV]; Beauti Bond [BB]; Adper Easy Bond [AE]; Single Bond Universal [SU]; All Bond Universal [AU]), and the dentin conditioning methods. Composite resins were placed on the dentin surfaces, and the teeth were sectioned. The microtensile bond strength was measured, and the failure mode of the fractured specimens was examined. The data were analyzed statistically using two-way ANOVA and Duncan's post hoc test. Results In GB, XV and SE (pH ≤ 2), the bond strength was decreased significantly when the dentin was etched (p < 0.05). In BB, AE and SU (pH 2.4 - 2.7), additional etching did not affect the bond strength (p > 0.05). In AU (pH = 3.2), additional etching increased the bond strength significantly (p < 0.05). When adhesives were applied to the acid etched dentin with ethanol-wet bonding, the bond strength was significantly higher than that of the no ethanol-wet bonding groups, and the incidence of cohesive failure was increased. Conclusions The effect of additional acid etching on the dentin bond strength was influenced by the pH of one-step self-etch adhesives. Ethanol wetting on etched dentin could create a stronger bonding performance of one-step self-etch adhesives for acid etched dentin. PMID:25671215

Early working memory and maternal communication in toddlers born very low birth weight

PubMed Central

Lowe, Jean; Erickson, Sarah J; MacLean, Peggy; Duvall, Susanne W

2010-01-01

Aim Early working memory is emerging as an important indicator of developmental outcome predicting later cognitive, behavioural and academic competencies. The current study compared early working memory in a sample of toddlers (18–22 months) born very low birth weight (VLBW; n = 40) and full term (n = 51) and the relationship between early working memory, mental developmental index (MDI), and maternal communication in both samples. Methods Early working memory, measured by object permanence; Bayley mental developmental index; and maternal communication, coded during mother-toddler play interaction, were examined in 39 toddlers born VLBW and 41 toddlers born full term. Results Toddlers born VLBW were found to be 6.4 times less likely to demonstrate attainment of object permanence than were toddlers born full term, adjusting for age at testing. MDI and maternal communication were found to be positively associated with attainment of object permanence in the VLBW group only. Conclusion The difference found in the early working memory performance of toddlers born VLBW, compared with those born full term, emphasizes the importance of assessing early working memory in at-risk populations, while the maternal communication finding highlights potential targets of intervention for improving working memory in toddlers born VLBW. PMID:19154525

Early working memory and maternal communication in toddlers born very low birth weight.

PubMed

Lowe, Jean; Erickson, Sarah J; Maclean, Peggy; Duvall, Susanne W

2009-04-01

Early working memory is emerging as an important indicator of developmental outcome predicting later cognitive, behavioural and academic competencies. The current study compared early working memory in a sample of toddlers (18-22 months) born very low birth weight (VLBW; n = 40) and full term (n = 51) and the relationship between early working memory, mental developmental index (MDI), and maternal communication in both samples. Early working memory, measured by object permanence; Bayley mental developmental index; and maternal communication, coded during mother-toddler play interaction, were examined in 39 toddlers born VLBW and 41 toddlers born full term. Toddlers born VLBW were found to be 6.4 times less likely to demonstrate attainment of object permanence than were toddlers born full term, adjusting for age at testing. MDI and maternal communication were found to be positively associated with attainment of object permanence in the VLBW group only. The difference found in the early working memory performance of toddlers born VLBW, compared with those born full term, emphasizes the importance of assessing early working memory in at-risk populations, while the maternal communication finding highlights potential targets of intervention for improving working memory in toddlers born VLBW.

Corrosion Embrittlement of Duralumin II Accelerated Corrosion Tests and the Behavior of High-Strength Aluminum Alloys of Different Compositions

NASA Technical Reports Server (NTRS)

Rawdon, Henry S

1928-01-01

The permanence, with respect to corrosion, of light aluminum alloy sheets of the duralumin type, that is, heat-treatable alloys containing Cu, Mg, Mn, and Si is discussed. Alloys of this type are subject to surface corrosion and corrosion of the interior by intercrystalline paths. Results are given of accelerated corrosion tests, tensile tests, the effect on corrosion of various alloying elements and heat treatments, electrical resistance measurements, and X-ray examinations.

HZE particle shielding using confined magnetic fields. [high-energy heavy ions

NASA Technical Reports Server (NTRS)

Townsend, L. W.

1983-01-01

The great rigidities characteristic of high energy heavy ion (HZE) particles are judged to preclude near term use of confined magnetic fields of reasonable dimensions and strengths for small spacecraft shielding on long duration manned missions. It is noted that a Mars mission-class shield, although effective against solar protons, would be useless for HZE particles unless the mass and size of the shield are increased by several orders of magnitude (to yield a shield comparable to those contemplated for permanent space stations).

An automated system for creep testing

NASA Technical Reports Server (NTRS)

Spiegel, F. Xavier; Weigman, Bernard J.

1992-01-01

A completely automated data collection system was devised to measure, analyze, and graph creep versus time using a PC, a 16 channel multiplexed analog to digital converter, and low friction potentiometers to measure length. The sampling rate for each experiment can be adjusted in the software to meet the needs of the material tested. Data is collected and stored on a diskette for permanent record and also for later data analysis on a different machine.

Sleep-Dependent Memory Consolidation and Reconsolidation

PubMed Central

Stickgold, Robert; Walker, Matthew P.

2009-01-01

Molecular, cellular, and systems-level processes convert initial, labile memory representations into more permanent ones, available for continued reactivation and recall over extended periods of time. These processes of memory consolidation and reconsolidation are not all-or-none phenomena, but rather a continuing series of biological adjustments that enhance both the efficiency and utility of stored memories over time. In this chapter, we review the role of sleep in supporting these disparate but related processes. PMID:17470412

The Effect of Gender and Attachment Styles on the Relationship between Marital Adjustment and Psychological Symptoms

ERIC Educational Resources Information Center

Koruk, Serdar

2017-01-01

The aim of this study is to investigate the moderating effects of attachment styles and gender on the predictive strength of marital adjustment on psychological symptoms among Turkish married individuals. Correlational model was used and the sample consisted of 178 married individuals. The data was gathered through online survey. The Turkish form…

Recovery of ammonia from swine manure using gas-permeable membranes: effect of waste strength and pH.

PubMed

Garcia-González, M C; Vanotti, M B

2015-04-01

Nitrogen recovery from swine manure was investigated using gas-permeable membranes. The process involved a continuous recirculation of an acidic solution through a gas-permeable membrane submerged in manure. Ammonia from manure was concentrated in the acidic solution increasing its pH, while pH decreased in manure. In the first set of experiments, nitrogen recovery efficiency was evaluated with no pH adjustment of manure; whereas in the second, manure with three different ammonia (NH3) concentrations (from 1070 to 2290 mg/L) was used adjusting their pH to 9 whenever pH decreased below 7.7. With no pH adjustment, NH3 recovery from manure was 55%, while NH3 recovery averaged 81% when pH of manure was adjusted. This work showed that as waste strength and available NH3 content increased in manure, more N was captured by the membrane. These results suggested that the gas-permeable membranes are a useful technology for NH3 recovery from manure, reducing environmental pollution whilst converting NH3 into a valuable ammonium (NH4(+)) salt fertilizer. Copyright © 2015 Elsevier Ltd. All rights reserved.

Adjustable speed drive study, part 1

NASA Astrophysics Data System (ADS)

Wallace, A.

1989-08-01

Advances in speed control for motors in recent years, notably those in power electronics, have widened the range of application for several adjustable speed drive (ASD) types to include the smaller horsepower sizes. The dc motor drive, formerly in almost universal use for speed control, is being challenged by the high efficiency induction motor/pulse width modulation (PWM) drive; and for special small horsepower size applications, by the permanent magnet motor/PWM inverter drive or by the switched reluctance motor drive. The main characteristics of the several ASD types suitable for small horsepower size applications are discussed, as well as their unwanted side effects: poor power factor, harmonic distortion of the supply, acoustic noise, and electromagnetic interference. A procedure is recommended for determining which, if any, ASD to use.

Magnetic quadrupoles lens for hot spot proton imaging in inertial confinement fusion

NASA Astrophysics Data System (ADS)

Teng, J.; Gu, Y. Q.; Chen, J.; Zhu, B.; Zhang, B.; Zhang, T. K.; Tan, F.; Hong, W.; Zhang, B. H.; Wang, X. Q.

2016-08-01

Imaging of DD-produced protons from an implosion hot spot region by miniature permanent magnetic quadrupole (PMQ) lens is proposed. Corresponding object-image relation is deduced and an adjust method for this imaging system is discussed. Ideal point-to-point imaging demands a monoenergetic proton source; nevertheless, we proved that the blur of image induced by proton energy spread is a second order effect therefore controllable. A proton imaging system based on miniature PMQ lens is designed for 2.8 MeV DD-protons and the adjust method in case of proton energy shift is proposed. The spatial resolution of this system is better than 10 μm when proton yield is above 109 and the spectra width is within 10%.

A Permanent-Magnet Microwave Ion Source For A Compact High-Yield Neutron Generator

NASA Astrophysics Data System (ADS)

Waldmann, O.; Ludewigt, B.

2011-06-01

We present recent work on the development of a microwave ion source that will be used in a high-yield compact neutron generator for active interrogation applications. The sealed tube generator will be capable of producing high neutron yields, 5×1011 n/s for D-T and ˜1×1010 n/s for D-D reactions, while remaining transportable. We constructed a microwave ion source (2.45 GHz) with permanent magnets to provide the magnetic field strength of 87.5 mT necessary for satisfying the electron cyclotron resonance (ECR) condition. Microwave ion sources can produce high extracted beam currents at the low gas pressures required for sealed tube operation and at lower power levels than previously used RF-driven ion sources. A 100 mA deuterium/tritium beam will be extracted through a large slit (60×6 mm2) to spread the beam power over a larger target area. This paper describes the design of the permanent-magnet microwave ion source and discusses the impact of the magnetic field design on the source performance. The required equivalent proton beam current density of 40 mA/cm2 was extracted at a moderate microwave power of 400 W with an optimized magnetic field.

Labour market trajectories and early retirement due to permanent disability: a study based on 14 972 new cases in Spain.

PubMed

Benavides, Fernando G; Duran, Xavier; Gimeno, David; Vanroelen, Christophe; Martínez, José Miguel

2015-08-01

To analyse the impact of labour market trajectory indicators on early retirement, measured by age at onset of permanent disability (PD). Four labour market trajectory indicators were reconstructed in 14 972 new cases of PD recognized between 2004 and 2010: (1) number of employment contracts, (2) number of unemployment periods, (3) number of periods without social security affiliation and (4) percentage of time spent in inactivity. The outcome was measured as the age at onset of PD. Median differences and 95% confidence intervals (95%CI) were compared using a median regression. Analyses were stratified by sex and adjusted for occupational category and total time elapsed between the beginning of working life and the age at onset of PD: separately for each labour market indicator, and adjusted for each other. In men, the age at the onset of PD for workers with 15 or more employment contracts decreased by 4.8 years; and for workers with five or more periods without affiliation it decreased by 4.6 years. In women, the corresponding decreases were 5.8 years for 15 or more contracts and 7.2 years for five or more unaffiliated periods. The results for four indicators slightly changed when they were mutually adjusted. Poor employment conditions, such as having a high number of periods without affiliation, a high number of contracts (in men) and a higher percentage of inactive time (in women) are associated with early retirement due to PD. © The Author 2014. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

Adjustments for drink size and ethanol content: new results from a self-report diary and transdermal sensor validation study.

PubMed

Bond, Jason C; Greenfield, Thomas K; Patterson, Deidre; Kerr, William C

2014-12-01

Prior studies adjusting self-reported measures of alcohol intake for drink size and ethanol (EtOH) content have relied on single-point assessments. A prospective 28-day diary study investigated magnitudes of drink-EtOH adjustments and factors associated with these adjustments. Transdermal alcohol sensor (TAS) readings and prediction of alcohol-related problems by number of drinks versus EtOH-adjusted intake were used to validate drink-EtOH adjustments. Self-completed event diaries listed up to 4 beverage types and 4 drinking events/d. Eligible volunteers had ≥ weekly drinking and ≥3+ drinks per occasion with ≥26 reported days and pre- and postsummary measures (n = 220). Event reports included drink types, sizes, brands or spirits contents, venues, drinks consumed, and drinking duration. Wine drinks averaged 1.19, beer 1.09, and spirits 1.54 U.S. standard drinks (14 g EtOH). Mean-adjusted alcohol intake was 22% larger using drink size and strength (brand/EtOH concentration) data. Adjusted drink levels were larger than "raw" drinks in all quantity ranges. Individual-level drink-EtOH adjustment ratios (EtOH adjusted/unadjusted amounts) averaged across all days drinking ranged from 0.73 to 3.33 (mean 1.22). Adjustment ratio was only marginally (and not significantly) positively related to usual quantity, frequency, and heavy drinking (all ps < 0.10), independent of gender, age, employment, and education, but those with lower incomes (both p < 0.01) drank stronger/bigger drinks. Controlling for raw number of drinks and other covariates, degree of adjustment independently predicted alcohol dependence symptoms (p < 0.01) and number of consequences (p < 0.05). In 30 respondents with sufficiently high-quality TAS readings, higher correlations (p = 0.04) were found between the adjusted versus the raw drinks/event and TAS areas under the curve. Absent drink size and strength data, intake assessments are downward biased by at least 20%. Between-subject variation in typical drink content and pour sizes should be addressed in treatment and epidemiological research. Copyright © 2015 by the Research Society on Alcoholism.

Adjustments for drink size and ethanol content: New results from a self-report diary and trans-dermal sensor validation study

PubMed Central

Bond, J. C.; Greenfield, T. K.; Patterson, D.; Kerr, W.C.

2014-01-01

Background Prior studies adjusting self-reported measures of alcohol intake for drink size and ethanol content have relied on single-point assessments. Methods A prospective 28-day diary study investigated magnitudes of drink ethanol adjustments and factors associated with these adjustments. Transdermal alcohol sensor (TAS) readings and prediction of alcohol-related problems by number of drinks versus ethanol-adjusted intake were used to validate drink ethanol adjustments. Self-completed event diaries listed up to 4 beverage types and 4 drinking events/day. Eligible volunteers had ≥ weekly drinking and ≥ 3+ drinks per occasion with ≥ 26 reported days and pre- and post-summary measures (n = 220). Event reports included drink types, sizes, brands or spirits contents, venues, drinks consumed and drinking duration. Results Wine drinks averaged 1.19, beer, 1.09 and spirits 1.54 US standard drinks (14g ethanol). Mean adjusted alcohol intake was 22% larger using drink size and strength (brand/ethanol concentration) data. Adjusted drink levels were larger than “raw” drinks in all quantity ranges. Individual-level drink ethanol adjustment ratios (ethanol adjusted/unadjusted amounts) averaged across all days drinking ranged from 0.73-3.33 (mean 1.22). Adjustment ratio was only marginally (and not significantly) positively related to usual quantity, frequency and heavy drinking (all ps<.1), independent of gender, age, employment, and education, but those with lower incomes (both p<.01) drank stronger/bigger drinks. Controlling for raw number of drinks and other covariates, degree of adjustment independently predicted alcohol dependence symptoms (p<.01) and number of consequences (p<.05). In 30 respondents with sufficiently high quality TAS readings, higher correlations (p=.04) were found between the adjusted vs. the raw drinks/event and TAS areas under the curve. Conclusions Absent drink size and strength data, intake assessments are downward biased by at least 20%. Between-subject variation in typical drink content and pour sizes should be addressed in treatment and epidemiological research. PMID:25581661

Patient Protection and Affordable Care Act; standards related to reinsurance, risk corridors, and risk adjustment. Final rule.

PubMed

2012-03-23

This final rule implements standards for States related to reinsurance and risk adjustment, and for health insurance issuers related to reinsurance, risk corridors, and risk adjustment consistent with title I of the Patient Protection and Affordable Care Act as amended by the Health Care and Education Reconciliation Act of 2010, referred to collectively as the Affordable Care Act. These programs will mitigate the impact of potential adverse selection and stabilize premiums in the individual and small group markets as insurance reforms and the Affordable Insurance Exchanges ("Exchanges") are implemented, starting in 2014. The transitional State-based reinsurance program serves to reduce uncertainty by sharing risk in the individual market through making payments for high claims costs for enrollees. The temporary Federally administered risk corridors program serves to protect against uncertainty in rate setting by qualified health plans sharing risk in losses and gains with the Federal government. The permanent State-based risk adjustment program provides payments to health insurance issuers that disproportionately attract high-risk populations (such as individuals with chronic conditions).

The dynamics of plant plasma membrane proteins: PINs and beyond.

PubMed

Luschnig, Christian; Vert, Grégory

2014-08-01

Plants are permanently situated in a fixed location and thus are well adapted to sense and respond to environmental stimuli and developmental cues. At the cellular level, several of these responses require delicate adjustments that affect the activity and steady-state levels of plasma membrane proteins. These adjustments involve both vesicular transport to the plasma membrane and protein internalization via endocytic sorting. A substantial part of our current knowledge of plant plasma membrane protein sorting is based on studies of PIN-FORMED (PIN) auxin transport proteins, which are found at distinct plasma membrane domains and have been implicated in directional efflux of the plant hormone auxin. Here, we discuss the mechanisms involved in establishing such polar protein distributions, focusing on PINs and other key plant plasma membrane proteins, and we highlight the pathways that allow for dynamic adjustments in protein distribution and turnover, which together constitute a versatile framework that underlies the remarkable capabilities of plants to adjust growth and development in their ever-changing environment. © 2014. Published by The Company of Biologists Ltd.

Physical activity, but not sedentary time, influences bone strength in late adolescence.

PubMed

Tan, Vina Ps; Macdonald, Heather M; Gabel, Leigh; McKay, Heather A

2018-03-20

Physical activity is essential for optimal bone strength accrual, but we know little about interactions between physical activity, sedentary time, and bone outcomes in older adolescents. Physical activity (by accelerometer and self-report) positively predicted bone strength and the distal and midshaft tibia in 15-year-old boys and girls. Lean body mass mediated the relationship between physical activity and bone strength in adolescents. To examine the influence of physical activity (PA) and sedentary time on bone strength, structure, and density in older adolescents. We used peripheral quantitative computed tomography to estimate bone strength at the distal tibia (8% site; bone strength index, BSI) and tibial midshaft (50% site; polar strength strain index, SSI p ) in adolescent boys (n = 86; 15.3 ± 0.4 years) and girls (n = 106; 15.3 ± 0.4 years). Using accelerometers (GT1M, Actigraph), we measured moderate-to-vigorous PA (MVPA Accel ), vigorous PA (VPA Accel ), and sedentary time in addition to self-reported MVPA (MVPA PAQ-A ) and impact PA (ImpactPA PAQ-A ). We examined relations between PA and sedentary time and bone outcomes, adjusting for ethnicity, maturity, tibial length, and total body lean mass. At the distal tibia, MVPA Accel and VPA Accel positively predicted BSI (explained 6-7% of the variance, p < 0.05). After adjusting for lean mass, only VPA Accel explained residual variance in BSI. At the tibial midshaft, MVPA Accel , but not VPA Accel , positively predicted SSI p (explained 3% of the variance, p = 0.01). Lean mass attenuated this association. MVPA PAQ-A and ImpactPA PAQ-A also positively predicted BSI and SSI p (explained 2-4% of the variance, p < 0.05), but only ImpactPA PAQ-A explained residual variance in BSI after accounting for lean mass. Sedentary time did not independently predict bone strength at either site. Greater tibial bone strength in active adolescents is mediated, in part, by lean mass. Despite spending most of their day in sedentary pursuits, adolescents' bone strength was not negatively influenced by sedentary time.

Evaluating the relationship between muscle and bone modeling response in older adults.

PubMed

Reider, Lisa; Beck, Thomas; Alley, Dawn; Miller, Ram; Shardell, Michelle; Schumacher, John; Magaziner, Jay; Cawthon, Peggy M; Barbour, Kamil E; Cauley, Jane A; Harris, Tamara

2016-09-01

Bone modeling, the process that continually adjusts bone strength in response to prevalent muscle-loading forces throughout an individual's lifespan, may play an important role in bone fragility with age. Femoral stress, an index of bone modeling response, can be estimated using measurements of DXA derived bone geometry and loading information incorporated into an engineering model. Assuming that individuals have adapted to habitual muscle loading forces, greater stresses indicate a diminished response and a weaker bone. The purpose of this paper was to evaluate the associations of lean mass and muscle strength with the femoral stress measure generated from the engineering model and to examine the extent to which lean mass and muscle strength account for variation in femoral stress among 2539 healthy older adults participating in the Health ABC study using linear regression. Mean femoral stress was higher in women (9.51, SD=1.85Mpa) than in men (8.02, SD=1.43Mpa). Percent lean mass explained more of the variation in femoral stress than did knee strength adjusted for body size (R(2)=0.187 vs. 0.055 in men; R(2)=0.237 vs. 0.095 in women). In models adjusted for potential confounders, for every percent increase in lean mass, mean femoral stress was 0.121Mpa lower (95% CI: -0.138, -0.104; p<0.001) in men and 0.139Mpa lower (95% CI: -0.158, -0.121; p<0.001) in women. The inverse association of femoral stress with lean mass and with knee strength did not differ by category of BMI. Results from this study provide insight into bone modeling differences as measured by femoral stress among older men and women and indicate that lean mass may capture elements of bone's response to load. Copyright © 2016 Elsevier Inc. All rights reserved.

Halbach array DC motor/generator

DOEpatents

Merritt, B.T.; Dreifuerst, G.R.; Post, R.F.

1998-01-06

A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An ``inside-out`` design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then ``switched`` or ``commutated`` to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives. 17 figs.

Halbach array DC motor/generator

DOEpatents

Merritt, Bernard T.; Dreifuerst, Gary R.; Post, Richard F.

1998-01-01

A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An "inside-out" design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then "switched" or "commutated" to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives.

Fractional order sliding-mode control based on parameters auto-tuning for velocity control of permanent magnet synchronous motor.

PubMed

Zhang, BiTao; Pi, YouGuo; Luo, Ying

2012-09-01

A fractional order sliding mode control (FROSMC) scheme based on parameters auto-tuning for the velocity control of permanent magnet synchronous motor (PMSM) is proposed in this paper. The control law of the proposed F(R)OSMC scheme is designed according to Lyapunov stability theorem. Based on the property of transferring energy with adjustable type in F(R)OSMC, this paper analyzes the chattering phenomenon in classic sliding mode control (SMC) is attenuated with F(R)OSMC system. A fuzzy logic inference scheme (FLIS) is utilized to obtain the gain of switching control. Simulations and experiments demonstrate that the proposed FROSMC not only achieve better control performance with smaller chatting than that with integer order sliding mode control, but also is robust to external load disturbance and parameter variations. Copyright © 2012 ISA. Published by Elsevier Ltd. All rights reserved.

Model reference adaptive control (MRAC)-based parameter identification applied to surface-mounted permanent magnet synchronous motor

NASA Astrophysics Data System (ADS)

Zhong, Chongquan; Lin, Yaoyao

2017-11-01

In this work, a model reference adaptive control-based estimated algorithm is proposed for online multi-parameter identification of surface-mounted permanent magnet synchronous machines. By taking the dq-axis equations of a practical motor as the reference model and the dq-axis estimation equations as the adjustable model, a standard model-reference-adaptive-system-based estimator was established. Additionally, the Popov hyperstability principle was used in the design of the adaptive law to guarantee accurate convergence. In order to reduce the oscillation of identification result, this work introduces a first-order low-pass digital filter to improve precision regarding the parameter estimation. The proposed scheme was then applied to an SPM synchronous motor control system without any additional circuits and implemented using a DSP TMS320LF2812. For analysis, the experimental results reveal the effectiveness of the proposed method.

Yield Strength Testing in Human Cadaver Nasal Septal Cartilage and L-Strut Constructs.

PubMed

Liu, Yuan F; Messinger, Kelton; Inman, Jared C

2017-01-01

To our knowledge, yield strength testing in human nasal septal cartilage has not been reported to date. An understanding of the basic mechanics of the nasal septum may help surgeons decide how much of an L-strut to preserve and how much grafting is needed. To determine the factors correlated with yield strength of the cartilaginous nasal septum and to explore the association between L-strut width and thickness in determining yield strength. In an anatomy laboratory, yield strength of rectangular pieces of fresh cadaver nasal septal cartilage was measured, and regression was performed to identify the factors correlated with yield strength. To measure yield strength in L-shaped models, 4 bonded paper L-struts models were constructed for every possible combination of the width and thickness, for a total of 240 models. Mathematical modeling using the resultant data with trend lines and surface fitting was performed to quantify the associations among L-strut width, thickness, and yield strength. The study dates were November 1, 2015, to April 1, 2016. The factors correlated with nasal cartilage yield strength and the associations among L-strut width, thickness, and yield strength in L-shaped models. Among 95 cartilage pieces from 12 human cadavers (mean [SD] age, 67.7 [12.6] years) and 240 constructed L-strut models, L-strut thickness was the only factor correlated with nasal septal cartilage yield strength (coefficient for thickness, 5.54; 95% CI, 4.08-7.00; P < .001), with an adjusted R2 correlation coefficient of 0.37. The mean (SD) yield strength R2 varied with L-strut thickness exponentially (0.93 [0.06]) for set widths, and it varied with L-strut width linearly (0.82 [0.11]) or logarithmically (0.85 [0.17]) for set thicknesses. A 3-dimensional surface model of yield strength with L-strut width and thickness as variables was created using a 2-dimensional gaussian function (adjusted R2 = 0.94). Estimated yield strengths were generated from the model to allow determination of the desired yield strength with different permutations of L-strut width and thickness. In this study of human cadaver nasal septal cartilage, L-strut thickness was significantly associated with yield strength. In a bonded paper L-strut model, L-strut thickness had a more important role in determining yield strength than L-strut width. Surgeons should consider the thickness of potential L-struts when determining the amount of cartilaginous septum to harvest and graft. NA.

Regular exercisers have stronger pelvic floor muscles than nonregular exercisers at midpregnancy.

PubMed

Bø, Kari; Ellstrøm Engh, Marie; Hilde, Gunvor

2018-04-01

Today all healthy pregnant women are encouraged to be physically active throughout pregnancy, with recommendations to participate in at least 30 minutes of aerobic activity on most days of the week in addition to performing strength training of the major muscle groups 2-3 days per week and also pelvic floor muscle training. There is, however, an ongoing debate whether general physical activity enhances or declines pelvic floor muscle function. The objectives of the study were to compare vaginal resting pressure, pelvic floor muscle strength, and endurance in regular exercisers (exercise ≥30 minutes 3 or more times per week) and nonexercisers at midpregnancy. Furthermore, another objective was to assess whether regular general exercise or pelvic floor muscle strength was associated with urinary incontinence. This was a cross-sectional study at mean gestational week 20.9 (±1.4) including 218 nulliparous pregnant women, with a mean age of 28.6 years (range, 19-40 years) and prepregnancy body mass index of 23.9 kg/m 2 (SD, 4.0). Vaginal resting pressure, pelvic floor muscle strength, and pelvic floor muscle endurance were measured by a high-precision pressure transducer connected to a vaginal balloon. The International Consultation on Incontinence Questionnaire Urinary Incontinence Short Form was used to assess urinary incontinence. Differences between groups were analyzed using an independent-sample Student t test. Linear regression analysis was conducted to adjust for prepregnancy body mass index, age, smoking during pregnancy, and regular pelvic floor muscle training during pregnancy. The significance value was set to P ≤ .05. Regular exercisers had statistically significant stronger (mean 6.4 cm H 2 O [95% confidence interval, 1.7-11.2]) and more enduring (mean 39.9 cm H 2 Osec [95% confidence interval, 42.2-75.7]) pelvic floor muscles. Only pelvic floor muscle strength remained statistically significant, when adjusting for possible confounders. Pelvic floor muscle strength and not regular general exercise was associated with urinary continence (adjusted B, -6.4 [95% confidence interval, -11.5 to -1.4]). Regular exercisers at midpregnancy have stronger pelvic floor muscles than their sedentary counterparts. However, pelvic floor muscle strength and not regular general exercise was associated with urinary incontinence. There is a need for additional studies in elite athletes and women performing more strenuous exercise regimens. Copyright © 2017 Elsevier Inc. All rights reserved.

Cost per quality-adjusted life year and disability-adjusted life years: the need for a new paradigm.

PubMed

Bevan, Gwyn; Hollinghurst, Sandra

2003-08-01

Two different paradigms have been proposed for setting priorities for access to healthcare: cost per quality-adjusted life year based on interventions, and disability-adjusted life years based on the burden of disease in a population. These formal paradigms make explicit the assumptions made implicitly every day in delivering and hence rationing access to healthcare. This paper outlines each paradigm's methodological problems and argues that each paradigm is incomplete in terms of providing the information necessary for making budgetary decisions on healthcare. It argues that a scientific revolution is required to create a new paradigm by combining the strengths of each.

Characterization of the Mechanical Strength, Resorption Properties, and Histologic Characteristics of a Fully Absorbable Material (Poly-4-hydroxybutyrate—PHASIX Mesh) in a Porcine Model of Hernia Repair

PubMed Central

Deeken, Corey R.; Matthews, Brent D.

2013-01-01

Purpose. Poly-4-hydroxybutyrate (P4HB) is a naturally derived, absorbable polymer. P4HB has been manufactured into PHASIX Mesh and P4HB Plug designs for soft tissue repair. The objective of this study was to evaluate mechanical strength, resorption properties, and histologic characteristics in a porcine model. Methods. Bilateral defects were created in the abdominal wall of n = 20 Yucatan minipigs and repaired in a bridged fashion with PHASIX Mesh or P4HB Plug fixated with SorbaFix or permanent suture, respectively. Mechanical strength, resorption properties, and histologic characteristics were evaluated at 6, 12, 26, and 52 weeks (n = 5 each). Results. PHASIX Mesh and P4HB Plug repairs exhibited similar burst strength, stiffness, and molecular weight at all time points, with no significant differences detected between the two devices (P > 0.05). PHASIX Mesh and P4HB Plug repairs also demonstrated significantly greater burst strength and stiffness than native abdominal wall at all time points (P < 0.05), and material resorption increased significantly over time (P < 0.001). Inflammatory infiltrates were mononuclear, and both devices exhibited mild to moderate granulation tissue/vascularization. Conclusions. PHASIX Mesh and P4HB Plug demonstrated significant mechanical strength compared to native abdominal wall, despite significant material resorption over time. Histological assessment revealed a comparable mild inflammatory response and mild to moderate granulation tissue/vascularization. PMID:23781348

Appendicular and whole body lean mass outcomes are associated with finite element analysis-derived bone strength at the distal radius and tibia in adults aged 40years and older.

PubMed

Gibbs, Jenna C; Giangregorio, Lora M; Wong, Andy K O; Josse, Robert G; Cheung, Angela M

2017-10-01

The purpose of this cross-sectional study was to determine how appendicular lean mass index (ALMI), and whole body lean (LMI) and fat mass indices (FMI) associate with estimated bone strength outcomes at the distal radius and tibia in adults aged 40 years and older. Dual energy X-ray absorptiometry (DXA) scans were performed to determine body composition, including whole body lean and fat mass, and appendicular lean mass. ALMI (appendicular lean mass/height 2 ), LMI (lean tissue mass/height 2 ) and FMI (fat mass/height 2 ) were calculated. High-resolution peripheral quantitative computed tomography (HRpQCT) scans were performed to assess bone structural properties at the distal radius and tibia. Using finite element analysis, failure load (N), stiffness (N/mm), ultimate stress (MPa), and cortical-to-trabecular load ratio were estimated from HRpQCT scans. The associations between body composition (ALMI, LMI, FMI) and estimated bone strength were examined using bivariate and multivariable linear regression analyses adjusting for age, sex, and other confounding variables. In 197 participants (127 women; mean±SD, age: 69.5±10.3y, body mass index: 27.95±4.95kg/m 2 , ALMI: 7.31±1.31kg/m 2 ), ALMI and LMI were significantly associated with failure load at the distal radius and tibia (explained 39%-48% of the variance) and remained significant after adjusting for confounding variables and multiple testing (R 2 =0.586-0.645, p<0.001). ALMI, LMI, and FMI did not have significant associations with ultimate stress in our multivariable models. FMI was significantly associated with cortical-to-trabecular load ratio at the distal radius and tibia (explained 6%-12% of the variance) and remained significant after adjusting for confounders and multiple testing (R 2 =0.208-0.243, p<0.001). FMI was no longer significantly associated with failure load after adjusting for confounders. These findings suggest that ALMI and LMI are important determinants of estimated bone strength, particularly failure load, at the distal radius and tibia, and may contribute to preservation of bone strength in middle-to-late adulthood. Copyright © 2017 Elsevier Inc. All rights reserved.

A Novel Porous Diamond - Titanium Biomaterial: Structure, Microstructure, Physico-Mechanical Properties and Biocompatibility.

PubMed

Guimarães, Zulmira A S; Damatta, Renato A; Guimarães, Renan S; Filgueira, Marcello

2017-01-01

With the aim of introducing permanent prostheses with main properties equivalent to cortical human bone, Ti-diamond composites were processed through powder metallurgy. Grade 1 titanium and mixtures of Ti powder with 2%, 5% and 10 wt% diamond were compacted at 100MPa, and then sintered at 1250°C/2hr/10-6mbar. Sintered samples were studied in the point of view of their microstructures, structures, yield strength and elastic modulus. The results showed that the best addition of diamonds was 2 wt%, which led to a uniform porosity, yield strength of 370MPa and elastic modulus of 13.9 GPa. Samples of Ti and Ti-2% diamond were subjected to in vitro cytotoxicity test, using cultures of VERO cells, and it resulted in a biocompatible and nontoxic composite material.

Tensile stress-strain behavior of boron/aluminum laminates

NASA Technical Reports Server (NTRS)

Sova, J. A.; Poe, C. C., Jr.

1978-01-01

The tensile stress-strain behavior of five types of boron/aluminum laminates was investigated. Longitudinal and transverse stress-strain curves were obtained for monotonic loading to failure and for three cycles of loading to successively higher load levels. The laminate strengths predicted by assuming that the zero deg plies failed first correlated well with the experimental results. The stress-strain curves for all the boron/aluminum laminates were nonlinear except at very small strains. Within the small linear regions, elastic constants calculated from laminate theory corresponded to those obtained experimentally to within 10 to 20 percent. A limited amount of cyclic loading did not affect the ultimate strength and strain for the boron/aluminum laminates. The laminates, however, exhibited a permanent strain on unloading. The Ramberg-Osgood equation was fitted to the stress-strain curves to obtain average curves for the various laminates.

Odds per Adjusted Standard Deviation: Comparing Strengths of Associations for Risk Factors Measured on Different Scales and Across Diseases and Populations

PubMed Central

Hopper, John L.

2015-01-01

How can the “strengths” of risk factors, in the sense of how well they discriminate cases from controls, be compared when they are measured on different scales such as continuous, binary, and integer? Given that risk estimates take into account other fitted and design-related factors—and that is how risk gradients are interpreted—so should the presentation of risk gradients. Therefore, for each risk factor X0, I propose using appropriate regression techniques to derive from appropriate population data the best fitting relationship between the mean of X0 and all the other covariates fitted in the model or adjusted for by design (X1, X2, … , Xn). The odds per adjusted standard deviation (OPERA) presents the risk association for X0 in terms of the change in risk per s = standard deviation of X0 adjusted for X1, X2, … , Xn, rather than the unadjusted standard deviation of X0 itself. If the increased risk is relative risk (RR)-fold over A adjusted standard deviations, then OPERA = exp[ln(RR)/A] = RRs. This unifying approach is illustrated by considering breast cancer and published risk estimates. OPERA estimates are by definition independent and can be used to compare the predictive strengths of risk factors across diseases and populations. PMID:26520360

[Design of Adjustable Magnetic Field Generating Device in the Capsule Endoscope Tracking System].

PubMed

Ruan, Chao; Guo, Xudong; Yang, Fei

2015-08-01

The capsule endoscope swallowed from the mouth into the digestive system can capture the images of important gastrointestinal tract regions. It can compensate for the blind spot of traditional endoscopic techniques. It enables inspection of the digestive system without discomfort or need for sedation. However, currently available clinical capsule endoscope has some limitations such as the diagnostic information being not able to correspond to the orientation in the body, since the doctor is unable to control the capsule motion and orientation. To solve the problem, it is significant to track the position and orientation of the capsule in the human body. This study presents an AC excitation wireless tracking method in the capsule endoscope, and the sensor embedded in the capsule can measure the magnetic field generated by excitation coil. And then the position and orientation of the capsule can be obtained by solving a magnetic field inverse problem. Since the magnetic field decays with distance dramatically, the dynamic range of the received signal spans three orders of magnitude, we designed an adjustable alternating magnetic field generating device. The device can adjust the strength of the alternating magnetic field automatically through the feedback signal from the sensor. The prototype experiment showed that the adjustable magnetic field generating device was feasible. It could realize the automatic adjustment of the magnetic field strength successfully, and improve the tracking accuracy.

Dynapenic Obesity and Prevalence of Type 2 Diabetes in Middle-Aged Japanese Men

PubMed Central

Kawakami, Ryoko; Sawada, Susumu S.; Lee, I-Min; Matsushita, Munehiro; Gando, Yuko; Okamoto, Takashi; Tsukamoto, Koji; Higuchi, Mitsuru; Miyachi, Motohiko; Blair, Steven N.

2015-01-01

Background The independent and combined associations of muscle strength and obesity on the prevalence of type 2 diabetes in Japanese men remain unclear. Methods Hand grip strength was cross-sectionally evaluated between 2011 and 2013 to assess muscle strength in 5039 male workers aged 40 to 64 years. Weight and height were measured, and overweight/obesity was defined as a body mass index ≥25 kg/m2. The prevalence of type 2 diabetes, defined as fasting plasma glucose ≥126 mg/dL and/or hemoglobin A1c ≥6.5% and/or self-reported physician-diagnosed diabetes, was evaluated. Odds ratios (OR) and 95% confidence intervals (95% CI) for the prevalence of type 2 diabetes were obtained using a logistic regression model. Results In total, 611 participants had type 2 diabetes, and 1763 participants were overweight/obese. After adjustment for covariates, we found an inverse association between muscle strength and the prevalence of type 2 diabetes (P for trend <0.01). In addition, when the analyses were stratified by obesity status, the multivariable-adjusted OR per 2-standard-deviation increase in muscle strength was 0.64 (95% CI, 0.49–0.83) in the overweight/obese group, compared to a weaker relationship in the normal-weight group (OR 0.79 per 2-standard-deviation increase; 95% CI, 0.60–1.06). Conclusions Dynapenia, an age-related decrease in muscle strength, is associated with increased prevalence of type 2 diabetes, and this relationship is stronger in overweight/obese middle-aged Japanese men than in normal-weight men. PMID:26256772

Parity, Lactation, Bone Strength, and 16-year Fracture Risk in Adult Women: Findings From the Study of Women’s Health Across the Nation (SWAN)

PubMed Central

Mori, Takahiro; Ishii, Shinya; Greendale, Gail A.; Cauley, Jane A.; Ruppert, Kristine; Crandall, Carolyn J.; Karlamangla, Arun S.

2015-01-01

Our objective was to examine the associations of lifetime parity and accumulated length of lactation with bone strength in women prior to the menopause transition and fracture risk during and after the transition. Participants were 2239 pre- or early perimenopausal women from the Study of Women's Health Across the Nation (SWAN), ages 42–53 at baseline, who had no childbirths after age 42. Bone mineral density (BMD) was measured in the femoral neck and the lumbar spine at the baseline SWAN visit using dual-energy x-ray absorptiometry, and composite indices of femoral neck strength relative to load (in three failure modes: compression, bending, and impact) were calculated from femoral neck BMD, femoral neck size, and body size. Data on fractures after age 42 were collected for a median follow-up of 15.7 years (interquartile range, 11.4 –18.5 years). In multiple linear regression adjusted for covariates, lifetime parity was associated positively with femoral neck strength relative to load (0.024 standard deviation (SD) increment in impact strength index per childbirth, p= 0.049), but accumulated length of lactation was associated negatively with lumbar spine BMD (0.018 SD decrement per every additional 6 months of lactation p=0.040). In Cox proportional hazards regression adjusted for covariates, neither parity nor lactation was associated with fracture hazard after age 42. In conclusion, parity and lactation have little impact on peak bone strength prior to menopause, and do not affect fracture risk after age 42 over 16-year follow-up. PMID:25528102

Comparison of Achievable Magnetic Fields with Superconducting and Cryogenic Permanent Magnet Undulators – A Comprehensive Study of Computed and Measured Values

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moog, E. R.; Dejus, R. J.; Sasaki, S.

2017-01-01

Magnetic modeling was performed to estimate achievable magnetic field strengths of superconducting undulators (SCUs) and to compare them with those of cryogenically cooled permanent magnet undulators (CPMUs). Starting with vacuum (beam stay-clear) gaps of 4.0 and 6.0 mm, realistic allowances for beam chambers (in the SCU case) and beam liners (in the CPMU case) were added. (A 6.0-mm vacuum gap is planned for the upgraded APS). The CPMU magnetic models consider both CPMUs that use NdFeB magnets at ~150 K and PrFeB magnets at 77 K. Parameters of the magnetic models are presented along with fitted coefficients of a Halbach-typemore » expression for the field dependence on the gap-to-period ratio. Field strengths for SCUs are estimated using a scaling law for planar SCUs; an equation for that is given. The SCUs provide higher magnetic fields than the highest-field CPMUs – those using PrFeB at 77 K – for period lengths longer than ~14 mm for NbTi-based SCUs and ~10 mm for Nb3Sn-based SCUs. To show that the model calculations and scaling law results are realistic, they are compared to CPMUs that have been built and NbTi-based SCUs that have been built. Brightness tuning curves of CPMUs (PrFeB) and SCUs (NbTi) for the upgraded APS lattice are also provided for realistic period lengths.« less

Associations of Fat Mass and Fat-Free Mass with Physical Fitness in 4-Year-Old Children: Results from the MINISTOP Trial.

PubMed

Henriksson, Pontus; Cadenas-Sanchez, Cristina; Leppänen, Marja H; Delisle Nyström, Christine; Ortega, Francisco B; Pomeroy, Jeremy; Ruiz, Jonatan R; Löf, Marie

2016-07-30

Physical fitness is a powerful marker of health in youth. Studies in adolescents and adults suggest that higher fat mass is related to worse physical fitness. However, there is limited knowledge whether fat mass and fat-free mass are associated with physical fitness already in preschoolers. Baseline data from the MINISTOP (Mobile-based INtervention Intended to STop Obesity in Preschoolers) trial was utilized for this cross-sectional analysis. Body composition was assessed using air-displacement plethysmography. Fat mass index [fat mass (kg)/height² (m)] and fat-free mass index [fat-free mass (kg)/height² (m)] were used to provide height-adjusted measures of body composition. Physical fitness was measured using the PREFIT (FITness testing in PREschool children) battery, which assesses cardiorespiratory fitness, upper-body and lower-body muscular strength as well as motor fitness. In total, this study included 303 children (168 boys and 135 girls), who were on average 4.48 ± 0.15 years old. Higher fat mass index was associated with worse cardiorespiratory fitness (standardized β = -0.17, p = 0.002), lower-body muscular strength (β = -0.17, p = 0.003) and motor fitness (β = -0.21, p < 0.001) in regression analyses adjusted for age, sex and mutually adjusted for fat-mass index and fat-free mass index. Conversely, higher fat-free mass index was associated with better cardiorespiratory fitness (β = 0.18, p = 0.002), upper-body muscular strength (β = 0.39, p < 0.001), lower-body muscular strength (β = 0.22, p < 0.001) and motor fitness (β = 0.17, p = 0.004). Thus, fat mass and fat-free mass in preschoolers appear to have joint but opposite associations with physical fitness, an important marker for current and future health.

DEB Type I Reconstitution Package Deployment Manual (RPDM).

DTIC Science & Technology

1981-05-01

Waveguide Assembly (d) 1177H02 TWT Power Amplifier (e) TCM-6RK-I Transmit and Receive Remote Kits 20 C" I--I- CL* Figure 8. Terminal 21 17 February...Twist Six Waveguide to Coax Adapters 1.2.1.1.1(d) TWT Power Amplifier. The power amplifier utilizes a periodic permanent magnetic focused travelling...possible to adjust input power while observing TWT output with a power meter and directional coupler. The capability of controlling the TWT drive

Weak interactions, omnivory and emergent food-web properties.

PubMed

Emmerson, Mark; Yearsley, Jon M

2004-02-22

Empirical studies have shown that, in real ecosystems, species-interaction strengths are generally skewed in their distribution towards weak interactions. Some theoretical work also suggests that weak interactions, especially in omnivorous links, are important for the local stability of a community at equilibrium. However, the majority of theoretical studies use uniform distributions of interaction strengths to generate artificial communities for study. We investigate the effects of the underlying interaction-strength distribution upon the return time, permanence and feasibility of simple Lotka-Volterra equilibrium communities. We show that a skew towards weak interactions promotes local and global stability only when omnivory is present. It is found that skewed interaction strengths are an emergent property of stable omnivorous communities, and that this skew towards weak interactions creates a dynamic constraint maintaining omnivory. Omnivory is more likely to occur when omnivorous interactions are skewed towards weak interactions. However, a skew towards weak interactions increases the return time to equilibrium, delays the recovery of ecosystems and hence decreases the stability of a community. When no skew is imposed, the set of stable omnivorous communities shows an emergent distribution of skewed interaction strengths. Our results apply to both local and global concepts of stability and are robust to the definition of a feasible community. These results are discussed in the light of empirical data and other theoretical studies, in conjunction with their broader implications for community assembly.

Effect of etching on bonding of a self-etch adhesive to dentine affected by amelogenesis imperfecta.

PubMed

Epasinghe, Don Jeevanie; Yiu, Cynthia Kar Yung

2018-02-01

Dentine affected by amelogenesis imperfecta (AI) is histologically altered due to loss of hypoplastic enamel and becomes hypermineralized. In the present study, we examined the effect of additional acid etching on microtensile bond strength of a self-etch adhesive to AI-affected dentine. Flat coronal dentine obtained from extracted AI-affected and non-carious permanent molars were allocated to two groups: (a) Clearfil SE Bond (control); and (b) Clearfil SE Bond and additional etching with 34% phosphoric acid for 15 seconds. The bonded teeth were sectioned into .8-mm 2 beams for microtensile bond strength testing, and stressed to failure under tension. The bond strength data were analyzed using two-way analysis of variance (dentine type and etching step) and Student-Newman-Keuls multiple comparison test (P<.05). Representative fractured beams from each group were examined under scanning electron microscopy. Both factors, dentine substrate (P<.001) and etching step (P<.05), and their interactions (P<.001), were statistically significant. Additional etching had an adverse effect on the bond strength of Clearfil SE Bond to normal dentine (P<.005), and no significant improvement was found for AI-affected dentine (P=.479). Additional acid etching does not improve the bond strength of a self-etch adhesive to AI-affected dentine. © 2017 John Wiley & Sons Australia, Ltd.

Loading capacity of zirconia implant supported hybrid ceramic crowns.

PubMed

Rohr, Nadja; Coldea, Andrea; Zitzmann, Nicola U; Fischer, Jens

2015-12-01

Recently a polymer infiltrated hybrid ceramic was developed, which is characterized by a low elastic modulus and therefore may be considered as potential material for implant supported single crowns. The purpose of the study was to evaluate the loading capacity of hybrid ceramic single crowns on one-piece zirconia implants with respect to the cement type. Fracture load tests were performed on standardized molar crowns milled from hybrid ceramic or feldspar ceramic, cemented to zirconia implants with either machined or etched intaglio surface using four different resin composite cements. Flexure strength, elastic modulus, indirect tensile strength and compressive strength of the cements were measured. Statistical analysis was performed using two-way ANOVA (p=0.05). The hybrid ceramic exhibited statistically significant higher fracture load values than the feldspar ceramic. Fracture load values and compressive strength values of the respective cements were correlated. Highest fracture load values were achieved with an adhesive cement (1253±148N). Etching of the intaglio surface did not improve the fracture load. Loading capacity of hybrid ceramic single crowns on one-piece zirconia implants is superior to that of feldspar ceramic. To achieve maximal loading capacity for permanent cementation of full-ceramic restorations on zirconia implants, self-adhesive or adhesive cements with a high compressive strength should be used. Copyright © 2015 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Protective Effects of Psychological Strengths Against Psychiatric Disorders Among Soldiers.

PubMed

Shrestha, Alice; Cornum, B G Rhonda; Vie, Loryana L; Scheier, Lawrence M; Lester, M A J Paul B; Seligman, Martin E P

2018-03-01

This study prospectively examined psychological strengths targeted in U.S. Army training programs as predictors of psychiatric diagnosis in active duty soldiers. At baseline, the cohort (140,584 soldiers) was without psychiatric disorder. Soldiers were then followed for 2 yr and classified as healthy, or acquiring a psychiatric diagnosis (adjustment disorder, anxiety disorder, depression, or post-traumatic stress disorder), or being prescribed psychotropic medication without a psychiatric diagnosis. Soldiers who remained healthy reported significantly higher strengths scores at baseline, compared with soldiers who were diagnosed with a psychiatric disorder. In addition, soldiers in the worst strengths decile were twice as likely to develop a psychiatric disorder, compared with soldiers in the top 50% on baseline strengths. Strengths afforded the greatest protection against depression. Offering tailored resilience training programs could help the Army steel vulnerable soldiers against the challenges of life, military training, and combat.

13 CFR 315.16 - Adjustment proposal requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... analysis of the Firm's problems, strengths and weaknesses and an assessment of its prospects for recovery... generally consists of knowledge-based services such as market penetration studies, customized business...

Quantifying Overdiagnosis in Cancer Screening: A Systematic Review to Evaluate the Methodology.

PubMed

Ripping, Theodora M; Ten Haaf, Kevin; Verbeek, André L M; van Ravesteyn, Nicolien T; Broeders, Mireille J M

2017-10-01

Overdiagnosis is the main harm of cancer screening programs but is difficult to quantify. This review aims to evaluate existing approaches to estimate the magnitude of overdiagnosis in cancer screening in order to gain insight into the strengths and limitations of these approaches and to provide researchers with guidance to obtain reliable estimates of overdiagnosis in cancer screening. A systematic review was done of primary research studies in PubMed that were published before January 1, 2016, and quantified overdiagnosis in breast cancer screening. The studies meeting inclusion criteria were then categorized by their methods to adjust for lead time and to obtain an unscreened reference population. For each approach, we provide an overview of the data required, assumptions made, limitations, and strengths. A total of 442 studies were identified in the initial search. Forty studies met the inclusion criteria for the qualitative review. We grouped the approaches to adjust for lead time in two main categories: the lead time approach and the excess incidence approach. The lead time approach was further subdivided into the mean lead time approach, lead time distribution approach, and natural history modeling. The excess incidence approach was subdivided into the cumulative incidence approach and early vs late-stage cancer approach. The approaches used to obtain an unscreened reference population were grouped into the following categories: control group of a randomized controlled trial, nonattenders, control region, extrapolation of a prescreening trend, uninvited groups, adjustment for the effect of screening, and natural history modeling. Each approach to adjust for lead time and obtain an unscreened reference population has its own strengths and limitations, which should be taken into consideration when estimating overdiagnosis. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

47 CFR 73.313 - Prediction of coverage.

Code of Federal Regulations, 2011 CFR

2011-10-01

... strength at 1 kilometer of about 107 dB above 1 uV/m (221.4 mV/m). (2) To use the chart for other ERP... for an ERP of 50 kW should be adjusted by 17 dB [10 log (50 kW) = 17 dBk], and therefore a field... predicting the distance to field strength contours, use the maximum ERP of the main radiated lobe in the...

Reduction of Risk for Low Back Injury in Theater of Operations

DTIC Science & Technology

2015-06-01

Assessed for eligibility (n = 698) 14 Figure 4. Predicted (from regression) isometric lumbar extension strength ( torque ) mean values (adjusted by...resistance exercise to the lumbar extensors in the ranges required for strength development, torque production from the gluteals and hamstrings must be...the small lumbar muscles play only a minor role in trunk extension torque production.17 Thus, they are considered to be the weak link in trunk

Psychosocial factors and obesity in 17 high-, middle- and low-income countries: the Prospective Urban Rural Epidemiologic study.

PubMed

Rosengren, A; Teo, K; Rangarajan, S; Kabali, C; Khumalo, I; Kutty, V R; Gupta, R; Yusuf, R; Iqbal, R; Ismail, N; Altuntas, Y; Kelishadi, R; Diaz, R; Avezum, A; Chifamba, J; Zatonska, K; Wei, L; Liao, X; Lopez-Jaramillo, P; Yusufali, A; Seron, P; Lear, S A; Yusuf, S

2015-08-01

Psychosocial stress has been proposed to contribute to obesity, particularly abdominal, or central obesity, through chronic activation of the neuroendocrine systems. However, these putative relationships are complex and dependent on country and cultural context. We investigated the association between psychosocial factors and general and abdominal obesity in the Prospective Urban Rural Epidemiologic study. This observational, cross-sectional study enrolled 151 966 individuals aged 35-70 years from 628 urban and rural communities in 17 high-, middle- and low-income countries. Data were collected for 125 290 individuals regarding education, anthropometrics, hypertension/diabetes, tobacco/alcohol use, diet and psychosocial factors (self-perceived stress and depression). After standardization for age, sex, country income and urban/rural location, the proportion with obesity (body mass index ≥30 kg m(-)(2)) increased from 15.7% in 40 831 individuals with no stress to 20.5% in 7720 individuals with permanent stress, with corresponding proportions for ethnicity- and sex-specific central obesity of 48.6% and 53.5%, respectively (P<0.0001 for both). Associations between stress and hypertension/diabetes tended to be inverse. Estimating the total effect of permanent stress with age, sex, physical activity, education and region as confounders, no relationship between stress and obesity persisted (adjusted prevalence ratio (PR) for obesity 1.04 (95% confidence interval: 0.99-1.10)). There was no relationship between ethnicity- and sex-specific central obesity (adjusted PR 1.00 (0.97-1.02)). Stratification by region yielded inconsistent associations. Depression was weakly but independently linked to obesity (PR 1.08 (1.04-1.12)), and very marginally to abdominal obesity (PR 1.01 (1.00-1.03)). Although individuals with permanent stress tended to be slightly more obese, there was no overall independent effect and no evidence that abdominal obesity or its consequences (hypertension, diabetes) increased with higher levels of stress or depression. This study does not support a causal link between psychosocial factors and abdominal obesity.

Optimization study on the magnetic field of superconducting Halbach Array magnet

NASA Astrophysics Data System (ADS)

Shen, Boyang; Geng, Jianzhao; Li, Chao; Zhang, Xiuchang; Fu, Lin; Zhang, Heng; Ma, Jun; Coombs, T. A.

2017-07-01

This paper presents the optimization on the strength and homogeneity of magnetic field from superconducting Halbach Array magnet. Conventional Halbach Array uses a special arrangement of permanent magnets which can generate homogeneous magnetic field. Superconducting Halbach Array utilizes High Temperature Superconductor (HTS) to construct an electromagnet to work below its critical temperature, which performs equivalently to the permanent magnet based Halbach Array. The simulations of superconducting Halbach Array were carried out using H-formulation based on B-dependent critical current density and bulk approximation, with the FEM platform COMSOL Multiphysics. The optimization focused on the coils' location, as well as the geometry and numbers of coils on the premise of maintaining the total amount of superconductor. Results show Halbach Array configuration based superconducting magnet is able to generate the magnetic field with intensity over 1 Tesla and improved homogeneity using proper optimization methods. Mathematical relation of these optimization parameters with the intensity and homogeneity of magnetic field was developed.

Cogging Torque Reduction Techniques for Spoke-type IPMSM

NASA Astrophysics Data System (ADS)

Bahrim, F. S.; Sulaiman, E.; Kumar, R.; Jusoh, L. I.

2017-08-01

A spoke-type interior permanent magnet synchronous motor (IPMSM) is extending its tentacles in industrial arena due to good flux-weakening capability and high power density. In many of the application, high strength of permanent magnet causes the undesirable effects of high cogging torque that can aggravate performance of the motor. High cogging torque is significantly produced by IPMSM due to the similar length and the effectiveness of the magnetic air-gap. The address of this study is to analyze and compare the cogging torque effect and performance of four common techniques for cogging torque reduction such as skewing, notching, pole pairing and rotor pole pairing. With the aid of 3-D finite element analysis (FEA) by JMAG software, a 6S-4P Spoke-type IPMSM with various rotor-PM configurations has been designed. As a result, the cogging torque effect reduced up to 69.5% for skewing technique, followed by 31.96%, 29.6%, and 17.53% by pole pairing, axial pole pairing and notching techniques respectively.

Tensile and compressive behavior of Borsic/aluminum

NASA Technical Reports Server (NTRS)

Herakovich, C. T.; Davis, J. G., Jr.; Viswanathan, C. N.

1977-01-01

The results of an experimental investigation of the mechanical behavior of Borsic/aluminum are presented. Composite laminates were tested in tension and compression for monotonically increasing load and also for variable loading cycles in which the maximum load was increased in each successive cycle. It is shown that significant strain-hardening, and corresponding increase in yield stress, is exhibited by the metal matrix laminates. For matrix dominated laminates, the current yield stress is essentially identical to the previous maximum stress, and unloading is essentially linear with large permanent strains after unloading. For laminates with fiber dominated behavior, the yield stress increases with increase in the previous maximum stress, but the increase in yield stress does not keep pace with the previous maximum stress. These fiber dominated laminates exhibit smaller nonlinear strains, reversed nonlinear behavior during unloading, and smaller permanent strains after unloading. Compression results from sandwich beams and flat coupons are shown to differ considerably. Results from beam specimens tend to exhibit higher values for modulus, yield stress, and strength.

Performance characteristics of No-Wall-Losses Hall Thruster

NASA Astrophysics Data System (ADS)

Ding, Yongjie; Peng, Wuji; Sun, Hezhi; Wei, Liqiu; Zeng, Ming; Wang, Fufeng; Yu, Daren

2017-08-01

A 200 W No-Wall-Losses Hall Thruster (NWLHT-200 W) is designed and processed to verify the technology of pushing down magnetic field with two permanent magnetic rings. To create a magnetic field, NWLHT-200 W uses two permanent magnetic rings (inner and outer) in the absence of magnetic screen or magnetic component. The anode is at the internal magnetic separatrix position, and the thruster shell is hollow to enhance the heat dissipation of ceramics. The magnetic field strength at the channel outlet is 90% of the maximum magnetic field. In this study, the experimental results concerning the thrust, discharge current, specific impulse, and efficiency are presented and examined. Our experiments show that "no erosive discharge" of wall is achieved within the range of 120-460 W; the maximum efficiency of the anode may reach 49%. The thruster designed can work stably for a long time, without any auxiliary heat dissipation equipment (heat pipe or radiator), which significantly prolongs the life of Hall thrusters.

A water-responsive shape memory ionomer with permanent shape reconfiguration ability

NASA Astrophysics Data System (ADS)

Bai, Yongkang; Zhang, Jiwen; Tian, Ran; Chen, Xin

2018-04-01

In this work, a water-responsive shape memory ionomer with high toughness was fabricated by cross-linking hyaluronic acid sodium (HAS) and polyvinyl alcohol (PVA) through coordination interactions. The strong Fe3+-carboxyl (from HAS) coordination interactions served as main physical cross-linking points for the performance of water-responsive shape memory, which associated with the flexibility of PVA chain producing excellent mechanical properties of this ionomer. The optimized ionomer was not only able to recover to its original shape within just 22 s by exposing to water, but exhibited high tensile strength up to 35.4 MPa and 4 times higher tractility than the ionomer without PVA. Moreover, the ionomers can be repeatedly programed to various new permanent shapes on demand due to the reversible physical interactions, which still performed complete and fast geometric recovery under stimuli even after 4 cycles of reprograming with 3 different shapes. The excellent shape memory and strong mechanical behaviors make our ionomers significant and promising smart materials for variety of applications.

Micromirror with large-tilting angle using Fe-based metallic glass.

PubMed

Lee, Jae-Wung; Lin, Yu-Ching; Kaushik, Neelam; Sharma, Parmanand; Makino, Akihiro; Inoue, Akihisa; Esashi, Masayoshi; Gessner, Thomas

2011-09-01

For enhancing the micromirror properties like tilting angle and stability during actuation, Fe-based metallic glass (MG) was applied for torsion bar material. A micromirror with mirror-plate diameter of 900 μm and torsion bar dimensions length 250 μm, width 30 μm and thickness 2.5 μm was chosen for the tilting angle tests, which were performed by permanent magnets and electromagnet setup. An extremely large tilting angle of over -270° was obtained from an activation test by permanent magnet that has approximately 0.2 T of magnetic strength. A large mechanical tilting angle of over -70° was obtained by applying approximately 1.1 mT to the mirror when 93 mAwas applied to solenoid setup. The large-tilting angle of the micromirror is due to the torsion bar, which was fabricated with Fe-based MG thin film that has large elastic strain limit, fracture toughness, and excellent magnetic property.

Numerical studies on the force characteristic of superconducting linear synchronous motor with HTS bulk magnet

NASA Astrophysics Data System (ADS)

Tang, Junjie; Li, Jing; Li, Xiang; Han, Le

2018-03-01

High temperature superconductor (HTS) bulks have significant potential use in linear motor application act as quasi-permanent magnet to replace traditional magnets. Force characteristic between HTS bulk magnet and traveling magnetic field was investigated with numerical simulation and experimental measurement in this paper. Influences of bulk height and number on the force characteristic were studied by the finite element model considering the nonlinear E-J relationship. Study was also made on addition of a back iron plate to the bulk magnet. Besides, force characteristic of bulk was compared with the permanent magnet results. The small initial decrease of the thrust could be explained by inside superconducting current redistribution. It was found that efficiency of linear motor did not increase by adding more bulk magnets. The bulk magnet will be remagnetized instead of erasing trapped field with the increase of the traveling magnetic field strength. The conclusions are helpful in prediction and design the linear motor with HTS bulk magnet.

TetraMag: A compact magnetizing device based on eight rotating permanent magnets

NASA Astrophysics Data System (ADS)

Gilbert, M.; Mertins, H.-Ch.; Tesch, M.; Berges, O.; Feilbach, Herbert; Schneider, C. M.

2012-02-01

In this paper we describe a novel magnetizing device based on eight rotatable permanent magnets arranged in a quadrupolar configuration, which is termed the TetraMag. TetraMag creates stable and homogeneous magnetic fields at the sample position with a resolution of 0.02 mT tunable between -570 mT and +570 mT. The field direction is continuously rotatable between 0° and 360° within the sample plane, while the field strength is maintained. A simplified mathematical description of TetraMag is developed leading to magnetic field calculations which are in good agreement with the experimental results. This versatile device avoids electrical energy dissipation, cooling mechanisms, and hysteresis effects known from classical electromagnets. It is ultrahigh vacuum compatible and it offers a completely free optical path over 180° for magneto-optical experiments. It is suitable for scattering experiments with synchrotron radiation and neutrons and may be employed in a large class of magnetization experiments.

Liquefaction and soil failure during 1994 northridge earthquake

USGS Publications Warehouse

Holzer, T.L.

1999-01-01

The 1994 Northridge, Calif., earthquake caused widespread permanent ground deformation on the gently sloping alluvial fan surface of the San Fernando Valley. The ground cracks and distributed deformation damaged both pipelines and surface structures. To evaluate the mechanism of soil failure, detailed subsurface investigations were conducted at four sites. Three sites are underlain by saturated sandy silts with low standard penetration test and cone penetration test values. These soils are similar to those that liquefied during the 1971 San Fernando earthquake, and are shown by widely used empirical relationships to be susceptible to liquefaction. The remaining site is underlain by saturated clay whose undrained shear strength is approximately half the value of the earthquake-induced shear stress at this location. This study demonstrates that the heterogeneous nature of alluvial fan sediments in combination with variations in the ground-water table can be responsible for complex patterns of permanent ground deformation. It may also help to explain some of the spatial variability of strong ground motion observed during the 1994 earthquake. ?? ASCE,.

Higher Protein Intake Is Associated with Higher Lean Mass and Quadriceps Muscle Strength in Adult Men and Women.

PubMed

Sahni, Shivani; Mangano, Kelsey M; Hannan, Marian T; Kiel, Douglas P; McLean, Robert R

2015-07-01

The impact of dietary protein intake on lower extremity lean mass and strength in community-dwelling adult Americans is not fully understood. The objective was to determine the associations between total protein (TP), animal protein (AP), and plant protein (PP) intakes and lean mass of the legs and quadriceps muscle strength. We further examined whether the associations with quadriceps strength may be explained by lean mass of the legs. This cross-sectional study included men (n = 1166) and women (n = 1509) from the Framingham Offspring Cohort in Massachusetts. Protein intake in grams per day was measured in either 1995-1998 or 1998-2001. Leg lean mass and isometric quadriceps strength, both in kilograms, were measured in 1996-2001. Multilinear regression models estimated adjusted least squares means of each of the muscle measures by quartile categories of protein intake, adjusting for relevant confounders and covariates. Mean age was 59 ± 9 y (range: 29-86 y) and TP intake was 80 ± 27 g/d in men and 76 ± 26 g/d in women. In men and women, leg lean mass was higher in participants in the highest quartiles of TP and AP intake compared with those in the lowest quartiles of intake [least squares means (kg): TP-17.6 vs. 17.1 in men, P-trend: 0.005, and 11.7 vs. 11.4 in women, P-trend: 0.006; AP-17.6 vs. 17.1 in men, P-trend: 0.002, and 11.7 vs. 11.4 in women, P-trend: 0.003]. PP intake was not associated with lean mass in either sex. In men and women, quadriceps strength was higher in participants in the highest quartile of PP intake compared with those in the lowest quartile [least squares means (kg): 22.9 vs. 21.7 in men, P-trend: 0.01, and 19.0 vs. 18.2 in women, P-trend: 0.01]; this association was no longer significant after adjustment for fruit and vegetable intake (P-trend: 0.06 in men and 0.10 in women). Although no significant association was observed for AP intake in either sex, nonsignificant protective trends were observed for TP intake (P-trend: 0.08 in men and 0.10 in women). Our findings suggest that maintaining adequate protein intake with age may help preserve muscle mass and strength in adult men and women. Dietary protein types may differentially affect muscle mass and strength. Whether PP is a marker of dietary quality or has a direct effect on muscle strength (independent of lean mass) needs to be further clarified. © 2015 American Society for Nutrition.

[Lipid and metabolic profiles in adolescents are affected more by physical fitness than physical activity (AVENA study)].

PubMed

García-Artero, Enrique; Ortega, Francisco B; Ruiz, Jonatan R; Mesa, José L; Delgado, Manuel; González-Gross, Marcela; García-Fuentes, Miguel; Vicente-Rodríguez, Germán; Gutiérrez, Angel; Castillo, Manuel J

2007-06-01

To determine whether the level of physical activity or physical fitness (i.e., aerobic capacity and muscle strength) in Spanish adolescents influences lipid and metabolic profiles. From a total of 2859 Spanish adolescents (age 13.0-18.5 years) taking part in the AVENA (Alimentación y Valoración del Estado Nutricional en Adolescentes) study, 460 (248 male, 212 female) were randomly selected for blood analysis. Their level of physical activity was determined by questionnaire. Aerobic capacity was assessed using the Course-Navette test. Muscle strength was evaluated using manual dynamometry, the long jump test, and the flexed arm hang test. A lipid-metabolic cardiovascular risk index was derived from the levels of triglycerides, low-density lipoprotein cholesterol (LDLC), high-density lipoprotein cholesterol (HDLC), and glucose. No relationship was found between the level of physical activity and lipid-metabolic index in either sex. In contrast, there was an inverse relationship between the lipid-metabolic index and aerobic capacity in males (P=.003) after adjustment for physical activity level and muscle strength. In females, a favorable lipid-metabolic index was associated with greater muscle strength (P=.048) after adjustment for aerobic capacity. These results indicate that, in adolescents, physical fitness, and not physical activity, is related to lipid and metabolic cardiovascular risk. Higher aerobic capacity in males and greater muscle strength in females were associated with lower lipid and metabolic risk factors for cardiovascular disease.

An electrical-heating and self-sensing shape memory polymer composite incorporated with carbon fiber felt

NASA Astrophysics Data System (ADS)

Gong, Xiaobo; Liu, Liwu; Liu, Yanju; Leng, Jinsong

2016-03-01

Shape memory polymers (SMPs) have the ability to adjust their stiffness, lock a temporary shape, and recover the permanent shape upon imposing an appropriate stimulus. They have found their way into the field of morphing structures. The electrically Joule resistive heating of the conductive composite can be a desirable stimulus to activate the shape memory effect of SMPs without external heating equipment. Electro-induced SMP composites incorporated with carbon fiber felt (CFF) were explored in this work. The CFF is an excellent conductive filler which can easily spread throughout the composite. It has a huge advantage in terms of low cost, simple manufacturing process, and uniform and tunable temperature distribution while heating. A continuous and compact conductive network made of carbon fibers and the overlap joints among them was observed from the microscopy images, and this network contributes to the high conductive properties of the CFF/SMP composites. The CFF/SMP composites can be electrical-heated rapidly and uniformly, and its’ shape recovery effect can be actuated by the electrical resistance Joule heating of the CFF without an external heater. The CFF/SMP composite get higher modulus and higher strength than the pure SMP without losing any strain recovery property. The high dependence of temperature and strain on the electrical resistance also make the composite a good self-sensing material. In general, the CFF/SMP composite shows great prospects as a potential material for the future morphing structures.

Adjustable speed drive study, June 1985 to September 1988. Part 2: Appendices

NASA Astrophysics Data System (ADS)

Wallace, Alan

1989-08-01

Advances in speed control for motors in recent years, notably those in power electronics, have widened the range of application for several adjustable speed drive (ASD) types to include the smaller horsepower sizes. The dc motor drive, formerly in almost universal use for speed control, is being challenged by the high efficiency induction motor/pulse width modulation (PWM) drive; and for special small horsepower size applications, by the permanent magnet motor/PWM inverter drive or by the switched reluctance motor drive. The main characteristics of the several ASD types suitable for small horsepower size applications are discussed, as well as their unwanted side effects: poor power factor, harmonic distortion of the supply, acoustic noise, and electromagnetic interference. A procedure is recommended for determining which, if any, ASD to use.

Differences in motor performance between children and adolescents in Mozambique and Portugal: impact of allometric scaling.

PubMed

Dos Santos, Fernanda Karina; Nevill, Allan; Gomes, Thayse Natacha Q F; Chaves, Raquel; Daca, Timóteo; Madeira, Aspacia; Katzmarzyk, Peter T; Prista, António; Maia, José A R

2016-05-01

Children from developed and developing countries have different anthropometric characteristics which may affect their motor performance (MP). To use the allometric approach to model the relationship between body size and MP in youth from two countries differing in socio-economic status-Portugal and Mozambique. A total of 2946 subjects, 1280 Mozambicans (688 girls) and 1666 Portuguese (826 girls), aged 10-15 years were sampled. Height and weight were measured and the reciprocal ponderal index (RPI) was computed. MP included handgrip strength, 1-mile run/walk, curl-ups and standing long jump tests. A multiplicative allometric model was adopted to adjust for body size differences across countries. Differences in MP between Mozambican and Portuguese children exist, invariably favouring the latter. The allometric models used to adjust MP for differences in body size identified the optimal body shape to be either the RPI or even more linear, i.e. approximately (height/mass(0.25)). Having adjusted the MP variables for differences in body size, the differences between Mozambican and Portuguese children were invariably reduced and, in the case of grip strength, reversed. These results reinforce the notion that significant differences exist in MP across countries, even after adjusting for differences in body size.

Associations between different components of fitness and fatness with academic performance in Chilean youths.

PubMed

Olivares, Pedro R; García-Rubio, Javier

2016-01-01

To analyze the associations between different components of fitness and fatness with academic performance, adjusting the analysis by sex, age, socio-economic status, region and school type in a Chilean sample. Data of fitness, fatness and academic performance was obtained from the Chilean System for the Assessment of Educational Quality test for eighth grade in 2011 and includes a sample of 18,746 subjects (49% females). Partial correlations adjusted by confounders were done to explore association between fitness and fatness components, and between the academic scores. Three unadjusted and adjusted linear regression models were done in order to analyze the associations of variables. Fatness has a negative association with academic performance when Body Mass Index (BMI) and Waist to Height Ratio (WHR) are assessed independently. When BMI and WHR are assessed jointly and adjusted by cofounders, WHR is more associated with academic performance than BMI, and only the association of WHR is positive. For fitness components, strength was the variable most associated with the academic performance. Cardiorespiratory capacity was not associated with academic performance if fatness and other fitness components are included in the model. Fitness and fatness are associated with academic performance. WHR and strength are more related with academic performance than BMI and cardiorespiratory capacity.

Associations between different components of fitness and fatness with academic performance in Chilean youths

PubMed Central

2016-01-01

Objectives To analyze the associations between different components of fitness and fatness with academic performance, adjusting the analysis by sex, age, socio-economic status, region and school type in a Chilean sample. Methods Data of fitness, fatness and academic performance was obtained from the Chilean System for the Assessment of Educational Quality test for eighth grade in 2011 and includes a sample of 18,746 subjects (49% females). Partial correlations adjusted by confounders were done to explore association between fitness and fatness components, and between the academic scores. Three unadjusted and adjusted linear regression models were done in order to analyze the associations of variables. Results Fatness has a negative association with academic performance when Body Mass Index (BMI) and Waist to Height Ratio (WHR) are assessed independently. When BMI and WHR are assessed jointly and adjusted by cofounders, WHR is more associated with academic performance than BMI, and only the association of WHR is positive. For fitness components, strength was the variable most associated with the academic performance. Cardiorespiratory capacity was not associated with academic performance if fatness and other fitness components are included in the model. Conclusions Fitness and fatness are associated with academic performance. WHR and strength are more related with academic performance than BMI and cardiorespiratory capacity. PMID:27761345

Microstructure and physical properties of steel-ladle purging plug refractory materials

NASA Astrophysics Data System (ADS)

Long, Bin; Xu, Gui-ying; Andreas, Buhr

2017-02-01

Three different castables were prepared as steel-ladle purging-plug refractory materials: corundum-based low-cement castable (C-LCC), corundum-spinel-based low-cement castable (C-S-LCC), and no-cement corundum-spinel castable (C-S-NCC) (hydratable alumina ρ-Al2O3 bonded). The properties of these castables were characterized with regard to water demand/flow ability, cold crushing strength (CCS), cold modulus of rupture (CMoR), permanent linear change (PLC), apparent porosity, and hot modulus of rupture (HMoR). The results show the CCS/CMoR and HMoR of C-LCC and C-S-LCC are greater than those of the castable C-S-NCC. According to the microstructure analysis, the sintering effect and the bonding type of the matrix material differ among the three castables. The calcium hexaluminate (CA6) phase in the matrix of C-LCC enhances the cold and hot mechanical strengths. In the case of C-S-LCC, the CA6 and 2CaO·2MgO·14Al2O3 (C2M2A14) ternary phases generated from the matrix can greatly increase the cold and hot mechanical strengths. In the case of the no-cement castable, sintering becomes difficult, resulting in a lower mechanical strength.

Shear bond strength to enamel after power bleaching activated by different sources.

PubMed

Can-Karabulut, Deniz C; Karabulut, Baris

2010-01-01

The purpose of the present study was to evaluate enamel bond strength of a composite resin material after hydrogen peroxide bleaching, activated by a diode laser (LaserSmile), an ozone device (HealOzone), a light-emitting diode (BT Cool whitening system), and a quartz-Plus. Fifty extracted caries-free permanent incisors were used in this study. Thirty-eight percent hydrogen peroxidegel was applied to sound, flattened labial enamel surfaces and activated by different sources. Enamel surfaces that had received no treatment were used as control samples. Bonding agent was applied according to the manufacturer's instructions and the adhesion test was performed according to ISO/TS 11405. Statistical analysis showed significant influence of the different activation technique of hydrogen peroxide on shear bond strength to enamel (ANOVA, LSD, P < 0.05). The data in this vitro explorative study suggest the activation of hydrogen peroxide by different sources may further affect the shear bond strength of subsequent composite resin restoration to enamel. Within the limitations of this in vitro study, further studies examining the structural changes of activated hydrogen peroxide-treated enamel are needed. Due to the different activation methods; duration of light irradiation effects, longer time periods may be needed before application of adhesive restorations to enamel, compared with non-activated bleaching.

60-Hz electric-field effects on pineal melatonin rhythms: time course for onset and recovery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, B.W.; Chess, E.K.; Anderson, L.E.

Rats exposed for 3 weeks to uniform 60-Hz electric fields of 39 kV/m (effective field strength) failed to show normal pineal gland circadian rhythms in serotonin N-acetyl transferase activity and melatonin concentrations. The time required for recovery of the melatonin rhythm after cessation of field exposure was determined to be less than 3 days. The rapid recovery suggests that the overall metabolic competence of the pineal is not permanently compromised by electric-field exposure, and that the circadian rhythm effect may be neuronally mediated.

[How does sleeping restore our brain?].

PubMed

Wigren, Henna-Kaisa; Stenberg, Tarja

2015-01-01

The central function of sleep is to keep our brain functional, but what is the restoration that sleep provides? Sleep after learning improves learning outcomes. According to the theory of synaptic homeostasis the total strength of synapses, having increased during the day, is restored during sleep, making room for the next day's experiences. According to the theory of active synaptic consolidation, repetition during sleep strengthens the synapses, and these strengthened synapses form a permanent engram. According to a recent study, removal of waste products from the brain may also be one of the functions of sleep.

Shaft transducer having dc output proportional to angular velocity

NASA Technical Reports Server (NTRS)

Handlykken, M. B. (Inventor)

1984-01-01

A brushless dc tachometer is disclosed that includes a high strength toroidal permanent magnet for providing a uniform magnetic field in an air gap, an annular pole piece opposite the magnet, and a pickup coil wound around the pole piece and adapted to rotate about the axis of the pole piece. The pickup coil is rotated by an input shaft to which the coil is coupled with the friction clip. The output of the coil is conducted to circuitry by a twisted wire pair. The input shaft also activates a position transducing potentiometer.

Predictors of Severe Tricuspid Regurgitation in Patients with Permanent Pacemaker or Automatic Implantable Cardioverter-Defibrillator Leads

PubMed Central

Najib, Mohammad Q.; Vittala, Satya S.; Challa, Suresh; Raizada, Amol; Tondato, Fernando J.; Lee, Howard R.; Chaliki, Hari P.

2013-01-01

Patients with permanent pacemaker or automatic implantable cardioverter-defibrillator (AICD) leads have an increased prevalence of tricuspid regurgitation. However, the roles of cardiac rhythm and lead-placement duration in the development of severe tricuspid regurgitation are unclear. We reviewed echocardiographic data on 26 consecutive patients who had severe tricuspid regurgitation after permanent pacemaker or AICD placement; before treatment, they had no organic tricuspid valve disease, pulmonary hypertension, left ventricular dysfunction, or severe tricuspid regurgitation. We compared the results to those of 26 control subjects who had these same devices but no more than mild tricuspid regurgitation. The patients and control subjects were similar in age (mean, 81 ±6 vs 81 ±8 yr; P = 0.83), sex (male, 42% vs 46%; P = 0.78), and left ventricular ejection fraction (0.60 ±0.06 vs 0.58 ± 0.05; P = 0.4). The patients had a higher prevalence of atrial fibrillation (92% vs 65%; P=0.01) and longer median duration of pacemaker or AICD lead placement (49.5 vs 5 mo; P < 0.001). After adjusting for age, sex, and right ventricular systolic pressure by multivariate logistic regression analysis, we found that atrial fibrillation (odds ratio=6.4; P = 0.03) and duration of lead placement (odds ratio=1.5/yr; P = 0.001) were independently associated with severe tricuspid regurgitation. Out study shows that atrial fibrillation and longer durations of lead placement might increase the risk of severe tricuspid regurgitation in patients with permanent pacemakers or AICDs. PMID:24391312

Issues in irrigation for people with a permanent colostomy: a review.

PubMed

Varma, Sarah

Colostomy irrigation is a way of achieving faecal continence and is offered as an alternative method of stoma care management to wearing and emptying a colostomy appliance. This article summarizes an extensive literature review carried out to determine the benefits of irrigation to colostomists and barriers to its uptake. Colostomy irrigation is a method of stoma care management offering 'control' over bowel habit thus assisting the colostomist in the adjustment and adaptation towards their new way of life.

Civilian Reuse of Former Military Bases. Summary of Completed Military Base Economic Adjustment Projects

DTIC Science & Technology

1990-06-01

plants or for the expansion of existing firms. Services, explains that what attracted the company Reprinted with the permission of Area Develop- ment...upgrade the park’s appearance and to expand pany. Mr. Hayworth adds that the company had a water pressure for the plant sprinkler system. 26 difficult time...and Aviation Uses: Office indus- as the permanent staff for the Committee. trial parks or plants have been established at 75 of The EAC works with

Estimating apparent maximum muscle stress of trunk extensor muscles in older adults using subject-specific musculoskeletal models.

PubMed

Burkhart, Katelyn A; Bruno, Alexander G; Bouxsein, Mary L; Bean, Jonathan F; Anderson, Dennis E

2018-01-01

Maximum muscle stress (MMS) is a critical parameter in musculoskeletal modeling, defining the maximum force that a muscle of given size can produce. However, a wide range of MMS values have been reported in literature, and few studies have estimated MMS in trunk muscles. Due to widespread use of musculoskeletal models in studies of the spine and trunk, there is a need to determine reasonable magnitude and range of trunk MMS. We measured trunk extension strength in 49 participants over 65 years of age, surveyed participants about low back pain, and acquired quantitative computed tomography (QCT) scans of their lumbar spines. Trunk muscle morphology was assessed from QCT scans and used to create a subject-specific musculoskeletal model for each participant. Model-predicted extension strength was computed using a trunk muscle MMS of 100 N/cm 2 . The MMS of each subject-specific model was then adjusted until the measured strength matched the model-predicted strength (±20 N). We found that measured trunk extension strength was significantly higher in men. With the initial constant MMS value, the musculoskeletal model generally over-predicted trunk extension strength. By adjusting MMS on a subject-specific basis, we found apparent MMS values ranging from 40 to 130 N/cm 2 , with an average of 75.5 N/cm 2 for both men and women. Subjects with low back pain had lower apparent MMS than subjects with no back pain. This work incorporates a unique approach to estimate subject-specific trunk MMS values via musculoskeletal modeling and provides a useful insight into MMS variation. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:498-505, 2018. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

Channel adjustments in a Mediterranean river over the last 150 years in the context of anthropic and natural controls

NASA Astrophysics Data System (ADS)

Scorpio, Vittoria; Rosskopf, Carmen M.

2016-12-01

Evolutionary trajectories and related control factors of the Fortore River (southern Italy) are analyzed over a 150-year period as to assess channel modifications. A multitemporal GIS analysis of topographic maps and aerial photographs together with topographic and geomorphological field surveys were performed. Attention was focused on the impact caused by human disturbance, above all the presence of the Occhito dam at only 40 km upstream of the Fortore mouth (central Adriatic coast). Results show that channel adjustments occurred in three distinct phases and were primarily driven by human disturbance that diversely affected reaches located upstream and downstream of the dam. From the last decades of the nineteenth century to the 1950s (phase 1), channel widening prevailed along upstream reaches whilst narrowing along downstream reaches. Major channel adjustments occurred from the 1950s until the end of the 1990s (phase 2), especially channel narrowing of up to 81% in upstream reaches and 98% in downstream reaches. Narrowing was accompanied by channel-bed lowering of 1 to 5 m and by pattern changes in prevalence from multithread to largely prevailing single-thread channel configurations. In-channel mining, channel works, and hydraulic interventions are considered key driving factors of observed channel adjustments. The closure of the Occhito dam in 1966 had significant and permanent effects on downstream reaches through overall discharge regulation and permanent sediment trapping as also proved by the progressive retreat of the Fortore river mouth area. From 2000 to 2015 (phase 3), a substantial trend inversion was observed with overall channel widening and partial aggradation of upstream reaches and total stabilization of downstream reaches. As highlighted by an integrated multitemporal analysis of recent channel changes and flood events, the latter have played an important role in channel recovery of upstream reaches. Comparison between the Fortore River and other rivers in southern Italy has allowed us to ascertain that the reconstructed evolutionary trajectories are quite similar and that control factors are essentially the same. In particular, it confirms the role of major hydraulic structures as to the amount of channel adjustments of downstream reaches and the ensuing scarce to nil potential to channel recovery of regulated reaches.

Pregnancy rates in HIV-positive women using contraceptives and efavirenz-based or nevirapine-based antiretroviral therapy in Kenya: a retrospective cohort study.

PubMed

Patel, Rena C; Onono, Maricianah; Gandhi, Monica; Blat, Cinthia; Hagey, Jill; Shade, Starley B; Vittinghoff, Eric; Bukusi, Elizabeth A; Newmann, Sara J; Cohen, Craig R

2015-11-01

Concerns have been raised about efavirenz reducing the effectiveness of contraceptive implants. We aimed to establish whether pregnancy rates differ between HIV-positive women who use various contraceptive methods and either efavirenz-based or nevirapine-based antiretroviral therapy (ART) regimens. We did this retrospective cohort study of HIV-positive women aged 15-45 years enrolled in 19 HIV care facilities supported by Family AIDS Care and Education Services in western Kenya between Jan 1, 2011, and Dec 31, 2013. Our primary outcome was incident pregnancy diagnosed clinically. The primary exposure was a combination of contraceptive method and efavirenz-based or nevirapine-based ART regimen. We used Poisson models, adjusting for repeated measures, and demographic, behavioural, and clinical factors, to compare pregnancy rates among women receiving different contraceptive and ART combinations. 24,560 women contributed 37,635 years of follow-up with 3337 incident pregnancies. In women using implants, adjusted pregnancy incidence was 1.1 per 100 person-years (95% CI 0.72-1.5) for nevirapine-based ART users and 3.3 per 100 person-years (1.8-4.8) for efavirenz-based ART users (adjusted incidence rate ratio [IRR] 3.0, 95% CI 1.3-4.6). In women using depot medroxyprogesterone acetate, adjusted pregnancy incidence was 4.5 per 100 person-years (95% CI 3.7-5.2) for nevirapine-based ART users and 5.4 per 100 person-years (4.0-6.8) for efavirenz-based ART users (adjusted IRR 1.2, 95% CI 0.91-1.5). Women using other contraceptive methods, except for intrauterine devices and permanent methods, had 3.1-4.1 higher rates of pregnancy than did those using implants, with 1.6-2.8 higher rates in women using efavirenz-based ART. Although HIV-positive women using implants and efavirenz-based ART had a three-times higher risk of contraceptive failure than did those using nevirapine-based ART, these women still had lower contraceptive failure rates than did those receiving all other contraceptive methods except for intrauterine devices and permanent methods. Guidelines for contraceptive and ART combinations should balance the failure rates for each contraceptive method and ART regimen combination against the high effectiveness of implants. None. Copyright © 2015 Elsevier Ltd. All rights reserved.

Effect of blood and saliva contamination on bond strength of brackets bonded with a protective liquid polish and a light-cured adhesive.

PubMed

Sayinsu, Korkmaz; Isik, Fulya; Sezen, Serdar; Aydemir, Bulent

2007-03-01

The application of a polymer coating to the labial enamel tooth surface before bonding can help keep white spot lesions from forming. Previous studies evaluating the effects of blood and saliva contamination on the bond strengths of light-cured composites showed significant reductions in bond strength values. The purpose of this study was to investigate whether the bond strength of a light-cured system (Transbond XT, 3M Unitek, Puchheim, Germany) used with a liquid polish (BisCover, Bisco, Schaumburg, Ill) is affected by contamination with blood or saliva. One hundred twenty permanent human premolars were randomly divided into 6 groups of 20. Various enamel surface conditions were studied: dry, blood contaminated, and saliva contaminated. A light-cured bonding system (Transbond XT) was used in all groups. The teeth in group 1 were bonded with Transbond XT. In the second group, BisCover polymeric resin polish was applied on the etched tooth surfaces before the brackets were bonded with Transbond XT resin. Comparison of the first and second groups showed no statistically significant difference. Groups 3 through 6 were bonded without Transbond XT. For groups 3 and 5, a layer of blood or saliva, respectively, was applied to the etched enamel followed by BisCover. In groups 4 and 6, blood or saliva, respectively, was applied on the light-cured BisCover. Shear forces were applied to the samples with a universal testing machine, and bond strengths were measured in megapascals. The protective liquid polish (BisCover) layer did not affect bond strength. Blood contamination on acid-etched surfaces affects bond strength more than saliva contamination. When a protective liquid polish (BisCover) is applied to the tooth surface, the effect of contamination by blood or saliva is prevented.

Research on low-temperature anodic bonding using induction heating

NASA Astrophysics Data System (ADS)

Chen, Mingxiang; Yi, Xinjian; Yuan, Liulin; Liu, Sheng

2006-04-01

This paper presents a new low temperature silicon-glass anodic bonding process using induction heating. Anodic bonding between silicon and glass (Pyrex 7740) has been achieved at temperature below 300 °C and almost bubble-free interfaces have been obtained. A 1KW 400KHz power supply is used to induce heat in graphite susceptors (simultaneously as the high-voltage electrodes of anodic bonding), which conduct heat to the bonding pair and permanently join the pair in 5 minutes. The results of pull tests indicate a bonding strength of above 5.0MPa for induction heating, which is greater than the strength for resistive heating at the same temperature. The fracture mainly occurs across the interface or inside the glass other than in the interface when the bonding temperature is over 200 °C Finally, the interfaces are examined and analyzed by scanning electron microscopy (SEM) and the bonding mechanisms are discussed.

Physical Nature of the Processes in Structure Forming, Phase and Chemical Composition of pipe Permanent Joints when MMA Welding

NASA Astrophysics Data System (ADS)

Il'yaschenko, D. P.; Chinakhov, D. A.; Danilov, V. I.; Sadykov, I. D.

2016-04-01

The paper outlines peculiarities of structure formation, phase and chemical composition in regard to heat content in molten electrode metal beads when pipe steel (steel 09G2S) welding using power sources with various energy characteristics. Mathematical calculations indicate an inverter power source provides minor heat content into the bead of electrode metal when welding. Experimental research has pointed at 4-9 % increase in impact strength of joints produced using an inverter power source in comparison with samples produced applying a diode rectifier. The following factors can possibly give rise to the increasing impact strength: difference in microstructures of weld joints, up to 50% shortening ferritic plates in metal of weld joint, change in dimensions of ferritic grains in the heat-affected zone by as much as 17.5 %, and decrease in the extent of heat-affected zone by 50%.

High damping properties of magnetic particles doped rubber composites at wide frequency

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tian, Ye, E-mail: schtiany@163.com; College of Material Science and Engineering, North University of China, Taiyuan 030051; Liu, Yaqing, E-mail: lyq@nuc.edu.cn

Highlights: ► A new kind of permanent magnetic rubber was prepared. ► The microstructure and magnetic properties were investigated. ► The mechanical and damping properties were discussed. ► The new material is expected to be an isolator material to a changed frequency. - Abstract: A new kind of rubber composite was prepared by doping SrFe{sub 12}O{sub 19} nanoparticles coated with silane coupling agents (Si-69) into nitrile butadiene rubber (NBR) matrix, which was characterized by the scanning electron microscopy and X-ray spectroscopy. The results showed that the SrFe{sub 12}O{sub 19} nanoparticles were well dispersed in rubber matrix. Furthermore, the mechanical andmore » magnetic properties of the rubber composites were investigated, in which the high tensile strength (15.8 MPa) and high saturation magnetization (22.9 emu/g) were observed. What is more, the high loss factor of the rubber composites was also obtained in a wide frequency range (0–100 Hz) at high loading (80 phr). The result is attributed to that the permanent magnetic field in rubber nanocomposites can absorb shock energy. These results indicate that the new kind of permanent magnetic rubber is expected to be a smart isolator material, in which the isolator will be able to adapt to a changed frequency.« less

Sub-micron fracture mechanism in silica-based glass activated by permanent densification from high-strain loading

DOE PAGES

Wereszczak, Andrew A.; Waters, Shirley B.; Parten, Randy J.; ...

2016-04-26

Several silica-based glasses were fractured at high strain energy via drop-weight testing on small specimens. A cylindrical specimen geometry was chosen to promote initially simple, axisymmetric, and uniform compressive loading. The imposed uniaxial compressive strain at impact was sufficiently high to qualitatively cause permanent densification. Produced fragments were collected for postmortem and a fraction of them, for all the silica-based glasses, consistently had distinct sub-micron-sized fractures (~ 300–1000 nm), designated here as “microkernels”, on their surfaces. They would most often appear as a sub-micron pore on the fragment - apparently if the microkernel had popped out as a consequence ofmore » the local crack plane running through it, tensile-strain release, and the associated formation of the fragment it was on. No fractographic evidence was found to show the microkernels were associated with local failure initiation. However, their positioning and habit sometimes suggested they were associated with localized crack branching and that they could have influenced secondary fracturing that occurred during overall crushing and comminution and associated fragment size and shape creation. Furthermore, the size range of these microkernels is much too small to affect structural flexure strength of these glasses for most applications but are of a size and concentration that may affect their ballistic, shock, crush, and comminution responses when permanent densification is concomitantly occurring.« less

In vitro Comparative Evaluation of Tensile Bond Strength of 6(th), 7(th) and 8(th) Generation Dentin Bonding Agents.

PubMed

Kamble, Suresh S; Kandasamy, Baburajan; Thillaigovindan, Ranjani; Goyal, Nitin Kumar; Talukdar, Pratim; Seal, Mukut

2015-05-01

Newer dentin bonding agents were developed to improve the quality of composite restoration and to reduce time consumption in its application. The aim of the present study was to evaluate tensile bond strength of 6(th), 7(th) and 8(th) generation bonding agents by in vitro method. Selected 60 permanent teeth were assigned into 20 in each group (Group I: 6(th) generation bonding agent-Adper SE plus 3M ESPE, Group II: 7(th) generation bonding agent-G-Bond GC Corp Japan and Group III: 8(th) generation dentin adhesives-FuturaBond, DC, Voco, Germany). With high-speed diamond disc, coronal dentin was exposed, and selected dentin bonding agents were applied, followed by composite restoration. All samples were saved in saline for 24 h and tensile bond strength testing was done using a universal testing machine. The obtained data were tabulated and statistically analyzed using ANOVA test. The tensile bond strength readings for 6(th) generation bonding agent was 32.2465, for 7(th) generation was 31.6734, and for 8(th)-generation dentine bonding agent was 34.74431. The highest tensile bond strength was seen in 8(th) generation bonding agent compared to 6(th) and 7(th) generation bonding agents. From the present study it can be conclude that 8(th) generation dentine adhesive (Futura DC, Voco, Germany) resulted in highest tensile bond strength compared to 6(th) (Adper SE plus, 3M ESPE) and 7(th) generation (G-Bond) dentin bonding agents.

The geomorphic effects of dams on rivers: some examples from southern Italy

NASA Astrophysics Data System (ADS)

Rosskopf, Carmen Maria; Scorpio, Vittoria

2017-04-01

During the second half of the last century, many rivers in southern Italy have experienced huge channel adjustments mainly induced by anthropic interventions. Particularly, in several cases dams were built along them mainly to meet the growing need for energy and water for irrigation purposes. The present study investigates the cases of Fortore and Biferno rivers, whose lower courses are regulated respectively since 1966 and 1976 by the Occhito and Ponteliscione dams, with the aim to verify possible impacts of the dams on channel morphology and adjustments over the last 60 years. Channel changes were analyzed by means of a multi-temporal GIS analysis of topographic maps and aerial photographs integrated with topographic and geomorphological field. The obtained evolutionary trajectories highlight that channel adjustments occurred through two distinct phases and led to an overall channel narrowing and channel bed lowering accompanied by pattern changes in prevalence from multithread to single-thread channel configurations. Major channel adjustments occurred in the first phase, from the 1950s until the end of the 1990s, under the dominant control of in-channel mining, channel works and hydraulic interventions. Regarding this phase, the impact of the dams is highlighted by net differences in the amount of channel adjustments of the reaches located respectively upstream and downstream of them. Especially channel narrowing was more intense in downstream reaches (up to 98% in the Fortore River and up to 96% in the Biferno River) than in upstream reaches (up to 81% in the Fortore and up to 86% in the Biferno). With respectively 7.4 m y-1 and -7.8 m y-1, averages rates of narrowing are very similar for the Fortore and Biferno in downstream reaches. Observed differences suggest that, besides the control factors that guided the evolution of the entire fluvial systems, the closure of the two dams had additional and permanent effects on downstream reaches through overall discharge regulation and permanent sediment trapping as also confirmed by the progressive retreat of the river mouth areas. From 2000 to 2016 (phase 2), a trend inversion is observed: channel narrowing is replaced by channel stabilization or widening and partial aggradation of upstream reaches and total stabilization of downstream reaches. Besides the cessation of in-channel mining, channel recovery appears favored by several major flood events, occurred from 2003 to 2015. The ongoing trend to recovery of upstream reaches is well evident for the Fortore River, whilst for the Biferno River, due to the presence of several secondary hydraulic structures (small hydropower reservoirs and check-dams), only some localized resumption of river dynamics can be observed evidenced by bank retreat, channel widening and sediment deposition. Regarding downstream reaches of both rivers, their stabilization can be interpreted as an amelioration of their condition with respect to the precedent period (phase 1). Nevertheless, their very scarce dynamics due to the permanent disturbance created by the dams along with the very low diversity of geomorphological and ecological river corridor features, the scarce to nil recovery potentials and associated high flood risks, strongly contrast possible restorative actions.

Brushed permanent magnet DC MLC motor operation in an external magnetic field.

PubMed

Yun, J; St Aubin, J; Rathee, S; Fallone, B G

2010-05-01

Linac-MR systems for real-time image-guided radiotherapy will utilize the multileaf collimators (MLCs) to perform conformal radiotherapy and tumor tracking. The MLCs would be exposed to the external fringe magnetic fields of the linac-MR hybrid systems. Therefore, an experimental investigation of the effect of an external magnetic field on the brushed permanent magnet DC motors used in some MLC systems was performed. The changes in motor speed and current were measured for varying external magnetic field strengths up to 2000 G generated by an EEV electromagnet. These changes in motor characteristics were measured for three orientations of the motor in the external magnetic field, mimicking changes in motor orientations due to installation and/or collimator rotations. In addition, the functionality of the associated magnetic motor encoder was tested. The tested motors are used with the Varian 120 leaf Millennium MLC (Maxon Motor half leaf and full leaf motors) and the Varian 52 leaf MKII MLC (MicroMo Electronics leaf motor) including a carriage motor (MicroMo Electronics). In most cases, the magnetic encoder of the motors failed prior to any damage to the gearbox or the permanent magnet motor itself. This sets an upper limit of the external magnetic field strength on the motor function. The measured limits of the external magnetic fields were found to vary by the motor type. The leaf motor used with a Varian 52 leaf MKII MLC system tolerated up to 450 +/- 10 G. The carriage motor tolerated up to 2000 +/- 10 G field. The motors used with the Varian 120 leaf Millennium MLC system were found to tolerate a maximum of 600 +/- 10 G. The current Varian MLC system motors can be used for real-time image-guided radiotherapy coupled to a linac-MR system, provided the fringe magnetic fields at their locations are below the determined tolerance levels. With the fringe magnetic fields of linac-MR systems expected to be larger than the tolerance levels determined, some form of magnetic shielding would be required.

Over two hundred million injuries to anterior teeth attributable to large overjet: a meta-analysis.

PubMed

Petti, Stefano

2015-02-01

The association between large overjet and traumatic dental injuries (TDIs) to anterior teeth is documented. However, observational studies are discrepant and generalizability (i.e. external validity) of meta-analyses is limited. Therefore, this meta-analysis sought to reconcile such discrepancies seeking to provide reliable risk estimates which could be generalizable at global level. Literature search (years 1990-2014) was performed (Scopus, GOOGLE Scholar, Medline). Selected primary studies were divided into subsets: 'primary teeth, overjet threshold 3-4 mm' (Primary3); 'permanent teeth, overjet threshold 3-4 mm' (Permanent3); 'permanent teeth, overjet threshold 6 ± 1 mm' (Permanent6). The adjusted odds ratios (ORs) were extracted. To obtain the highest level of reliability (i.e. internal validity), the pooled OR estimates were assessed accounting for between-study heterogeneity, publication bias and confounding. Result robustness was investigated with sensitivity and subgroup analyses. Fifty-four primary studies from Africa, America, Asia and Europe were included. The sampled individuals were children, adolescents and adults. Overall, there were >10 000 patients with TDI. The pooled OR estimates resulted 2.31 (95% confidence interval - 95CI, 1.01-5.27), 2.01 (95CI, 1.39-2.91) and 2.24 (95CI, 1.56-3.21) for Primary3, Permanent3 and Permant6, respectively. Sensitivity and subgroup analyses corroborated these estimates. Reliability and generalizability of pooled ORs were high enough and made it possible to assess that the fraction of global TDIs attributable to large overjet is 21.8% (95CI, 9.7-34.5%) and that large overjet is co-responsible for 235 008 000 global TDI cases (95CI, 104,760,000-372,168,000). This high global burden of TDI suggests that preventive measures must be implemented in patients with large overjet. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Mechanical Performance Test of Rubber-Powder Modified Concrete

NASA Astrophysics Data System (ADS)

Zhang, Yan Cong; Gao, Ling Ling

2018-06-01

A number of rubber cement concrete specimens that rubber powder dosage different were obtained using same cement, water and fine aggregates, by adjusting the dosage of rubber powder. Then it was used to research the influence of rubber powder dosage on performance of cement concrete by measuring its liquidity, strength and toughness. The results show that: when water-cement ratio was equal and rubber powder replacing the same volume sand, the fluidity of cement concrete almost linear increased with rubber powder dosage increasing. With dosage of rubber powder increasing, compressive strength and flexural strength reduced, but toughness linear growth trend when dosage of rubber powder less 30%.

Oscillator Strengths and Predissociation Widths for Rydberg Transitions in Carbon Monoxide

NASA Technical Reports Server (NTRS)

Federman, Steven R.; Sheffer, Y.; Eidelsberg, Michele; Lemaire, Jean-Louis; Fillion, Jean-Hugues; Rostas, Francois; Ruiz, J.

2006-01-01

CO is used as a probe of astronomical environments ranging from planetary atmospheres and comets to interstellar clouds and the envelopes surrounding stars near the end of their lives. One of the processes controlling the CO abundance and the ratio of its isotopomers is photodissociation. Accurate oscillator strengths for Rydberg transitions are needed for modeling this process. Absorption bands were analyzed by synthesizing the profiles with codes developed independently in Meudon and Toledo. Each synthetic spectrum was adjusted to match the experimental one in a non-linear least-squares fitting procedure with the band oscillator strength, the line width (instrumental and predissociation.

Respiratory Muscle Strength Predicts Decline in Mobility in Older Persons

PubMed Central

Buchman, A.S.; Boyle, P.A.; Wilson, R.S.; Leurgans, S.; Shah, R.C.; Bennett, D.A.

2008-01-01

Objectives To test the hypothesis that respiratory muscle strength is associated with the rate of change in mobility even after controlling for leg strength and physical activity. Methods Prospective study of 890 ambulatory older persons without dementia who underwent annual clinical evaluations to examine change in the rate of mobility over time. Results In a linear mixed-effect model adjusted for age, sex, and education, mobility declined about 0.12 unit/year, and higher levels of respiratory muscle strength were associated with a slower rate of mobility decline (estimate 0.043, SE 0.012, p < 0.001). Respiratory muscle strength remained associated with the rate of change in mobility even after controlling for lower extremity strength (estimate 0.036, SE 0.012, p = 0.004). In a model that included terms for respiratory muscle strength, lower extremity strength and physical activity together, all three were independent predictors of mobility decline in older persons. These associations remained significant even after controlling for body composition, global cognition, the development of dementia, parkinsonian signs, possible pulmonary disease, smoking, joint pain and chronic diseases. Conclusion Respiratory muscle strength is associated with mobility decline in older persons independent of lower extremity strength and physical activity. Clinical interventions to improve respiratory muscle strength may decrease the burden of mobility impairment in the elderly. PMID:18784416

Self-etching adhesive on intact enamel, with and without pre-etching.

PubMed

Devarasa, G M; Subba Reddy, V V; Chaitra, N L; Swarna, Y M

2012-05-01

Bond strengths of composite resin to enamel using self-etch adhesive (SEA) Clearfil SE bond system on intact enamel and enamel pre-etched with phosphoric acid were compared. The objective was to determine if the pre-etching would increase the bond strengths of the SEA systems to intact enamel and to evaluate the effect of pre-etching on bond formation of self-etch adhesives on intact enamel. Labial surfaces of 40 caries free permanent upper central and lateral incisors were cleaned, sectioned of their roots. All specimens were mounted on acrylic block and divided randomly into four groups. In two groups the application of self-etch adhesive, Clearfil SE bond was carried as per manufacturer's instructions, composite cylinders were built, whereas in the other two groups, 37% phosphoric acid etching was done before the application of self-etching adhesives. Then the resin tags were analyzed using scanning electron microscope and shear bond strength was measured using Instron universal testing machine. When phosphoric acid was used, there was significant increase in the depth of penetration of resin tags and in the Shear Bond Strength of composite to enamel. The results indicate that out of both treatment groups, pre-etching the intact enamel with 37% phosphoric acid resulted in formation of longer resin tags and higher depth of penetration of resin tags of the Clearfil SE bond, and attaining higher bond strength of the Clearfil SE bond to intact enamel. Copyright © 2011 Wiley Periodicals, Inc.

The eccentric, concentric strength relationship of the hamstring muscles in chronic low back pain.

PubMed

Marshall, Paul W M; Mannion, Jamie; Murphy, Bernadette A

2010-02-01

The objective of this study was to measure hamstring muscle eccentric and concentric strength in individuals with and without low back pain (LBP). Two composite scores for the relative balance of eccentric to concentric strength at the different movement velocities were calculated (the DEC and SEC), to determine whether or not self perceived pain, disability, or fear avoidance measures were associated with hamstring strength characteristics. Cross-sectional repeated measures design. University laboratory. Fifteen individuals with chronic LBP and 15 matched controls. Isokinetic eccentric and concentric strength at 30 degrees s(-1) and 120 degrees s(-1)(.) Composite scores (DEC and SEC) based on peak torque were calculated to evaluate the relationship between the different muscle actions across the test velocities. Self report measures included the Oswestry disability index, general health and well being, fear avoidance, and pain. Eccentric/concentric strength ratio at 30 degrees s(-1) was higher for the LBP group (F(1,58)=4.81, p=0.032). The SEC was also higher for the LBP (F(1,58)=5.97, p=0.018). Fear avoidance beliefs and mental well-being were significantly associated with the SEC only in the LBP group (adjusted r(2)=0.26, (F(2,27)=5.8, p=.008). For the control group both the DEC and SEC were associated with self report measures. Matched differences between groups' for the SEC were best explained by fear avoidance beliefs about work (adjusted r(2)=0.12, F(1,28)=5.1, p=0.03). Reduced concentric relative to eccentric strength is best identified by the SEC. The SEC was significantly associated with impaired self report measures of fear avoidance and mental well being in individuals with LBP. Differences between groups for the SEC were best explained by fear avoidance beliefs about work.

Threshold values of physical performance tests for locomotive syndrome.

PubMed

Muramoto, Akio; Imagama, Shiro; Ito, Zenya; Hirano, Kenichi; Tauchi, Ryoji; Ishiguro, Naoki; Hasegawa, Yukiharu

2013-07-01

Our previous study determined which physical performance tests were the most useful for evaluating locomotive syndrome. Our current study establishes reference values for these major physical performance tests with regards to diagnosing and assessing risk of locomotive syndrome (LS). We measured timed-up-and-go test, one-leg standing time, back muscle strength, grip strength, 10-m gait time and maximum stride in 406 individuals (167 men, 239 women) between the ages of 60-88 years (mean 68.8 ± 6.7 years) during Yakumo Study 2011-12. The LS was defined as having a score of >16 points on the 25-Question Geriatric Locomotive Function Scale (GLFS-25). The reference value of each physical test was determined using receiver operating characteristics analysis. Women had a significantly higher prevalence of LS than men did and also scored significantly higher on the GLFS-25: women, 9.2 ± 10.3 pts; men, 6.7 ± 8.0 pts. Both genders in the non-LS group performed significantly better in all physical performance test gender except for back muscle strength in men and grip strength in both genders than those in the LS group, even after adjusting for age. The results of all the physical performance tests correlated significantly with the GLFS-25 scores of both genders even after adjusting for age except for grip strength. Reference values for TUG, one-leg standing time, back muscle strength, 10-m gait time, maximum stride and grip strength in men were 6.7 s, 21 s, 78 kg, 5.5 s and, 119 cm and 34 kg, respectively, and those for women were 7.5 s, 15 s, 40 kg, 6.2 s, 104 cm, and 22 kg, respectively. We established reference values for major physical performance tests used when assessing locomotive syndrome as defined by the GLFS-25. Our results can be used to characterize physical function and to help tailor an anti-LS training program for each individual.

Easy Debonding of Ceramic Brackets Bonded with a Light-Cured Orthodontic Adhesive Containing Microcapsules with a CO2 Laser.

PubMed

Arima, Shiori; Namura, Yasuhiro; Tamura, Takahiko; Shimizu, Noriyoshi

2018-03-01

An easy debonding method for ceramic brackets using a light-cured Bis-GMA resin containing heat-expandable microcapsules and CO 2 laser was investigated. Ceramic brackets are used frequently in orthodontic treatment because of their desirable esthetic properties. However, the application of heavy force to ceramic brackets in debonding can fracture the tooth enamel and ceramic brackets, causing tooth pain. In total, 60 freshly extracted bovine permanent mandibular incisors were divided randomly into 10 groups of 6 specimens each, corresponding to the number of variables tested. Ceramic brackets were bonded to bovine permanent mandibular incisors using an orthodontic bonding agent containing heat-expandable microcapsules at different levels (0-30 wt%) and resin composite paste, and cured by a curing device. The bond strengths were measured before and after CO 2 laser irradiation, and the temperature increase in the pulp chamber in fresh human first premolars was also evaluated. With CO 2 laser irradiation for 5 sec to the bracket, the bond strength in the 25% microcapsule group decreased significantly, to ∼0.17-fold, compared with that of the no-laser group (p < 0.05). The maximum temperature increase in the pulp chamber was 5.3°C with laser irradiation, which was less than the level that induces pulp damage. From these results, it seems likely that the combined use of a light-cured orthodontic bonding agent containing microcapsules and a CO 2 laser is a simple debonding system for ceramic brackets, with less debonding time and enamel damage.

Assessment of Incident Spine and Hip Fractures in Women and Men using Finite Element Analysis of CT Scans

PubMed Central

Kopperdahl, David L.; Aspelund, Thor; Hoffmann, Paul F.; Sigurdsson, Sigurdur; Siggeirsdottir, Kristin; Harris, Tamara B.; Gudnason, Vilmundur; Keaveny, Tony M.

2013-01-01

Finite element analysis of computed tomography (CT) scans provides non-invasive estimates of bone strength at the spine and hip. To further validate such estimates clinically, we performed a five-year case-control study of 1110 women and men over age 65 from the AGES-Reykjavik cohort (case = incident spine or hip fracture; control = no incident spine or hip fracture, respectively). From the baseline CT scans, we measured femoral and vertebral strength, as well as bone mineral density (BMD) at the hip (areal BMD only) and lumbar spine (trabecular volumetric BMD only). We found that, for incident radiographically-confirmed spine fractures (n=167), the age-adjusted odds ratio for vertebral strength was significant for women (2.8, 95% CI: 1.8–4.3) and men (2.2, 95% CI: 1.5–3.2), and for men, remained significant (p=0.01) independent of vertebral trabecular volumetric BMD. For incident hip fractures (n=171), the age-adjusted odds ratio for femoral strength was significant for women (4.2, 95% CI: 2.6–6.9) and men (3.5, 95% CI: 2.3–5.3) and remained significant after adjusting for femoral neck areal BMD in women and for total hip areal BMD in both sexes; fracture classification improved for women by combining femoral strength with femoral neck areal BMD (p=0.002). For both sexes, the probabilities of spine and hip fractures were similarly high at the BMD-based interventional thresholds for osteoporosis and at corresponding pre-established thresholds for “fragile bone strength” (spine: women ≤ 4,500 N, men ≤ 6,500 N; hip: women ≤ 3,000 N, men ≤ 3,500 N). Since it is well established that individuals over age 65 who have osteoporosis at the hip or spine by BMD criteria should be considered at high risk of fracture, these results indicate that individuals who have “fragile bone strength” at the hip or spine should also be considered at high risk of fracture. PMID:23956027

Effect of Waterproofing Admixtures on the Flexural Strength and Corrosion Resistance of Concrete

NASA Astrophysics Data System (ADS)

Geetha, A.; Perumal, P.

2012-02-01

This paper deals about the flexural strength and corrosion behaviour of concrete using waterproofing admixtures. The effect of waterproofing admixtures on the corrosion behaviour of RCC specimen has been studied by conducting accelerated corrosion test. To identify the effect of corrosion in pull out strength, corrosion process was induced by means of accelerated corrosion procedure. To accelerate the reinforcement corrosion, direct electric current was impressed on the rebar embedded in the specimen using a DC power supply system that has a facility to adjust voltage. The addition of waterproofing admixtures also shows the improvement in the flexural strength of concrete has been studied by conducting flexural strength tests on the concrete prism specimen of size 100 × 100 × 500 mm with and without admixtures for various dosages and various curing periods of 7 and 28 days. The results showed that the presence of waterproofing admixtures always improves the corrosion resistance and thus increases the strength of concrete due to the hydrophobic action of waterproofing admixtures.

Bone Strength Estimated by Micro-Finite Element Analysis (µFEA) Is Heritable and Shares Genetic Predisposition With Areal BMD: The Framingham Study.

PubMed

Karasik, David; Demissie, Serkalem; Lu, Darlene; Broe, Kerry E; Boyd, Steven K; Liu, Ching-Ti; Hsu, Yi-Hsiang; Bouxsein, Mary L; Kiel, Douglas P

2017-11-01

Genetic factors contribute to the risk of bone fractures, partly because of effects on bone strength. High-resolution peripheral quantitative computed tomography (HR-pQCT) estimates bone strength using micro-finite element analysis (µFEA). The goal of this study was to investigate if the bone failure load estimated by HR-pQCT-based µFEA is heritable and to what extent it shares genetic regulation with areal bone mineral density (aBMD). Bone microarchitecture was measured by HR-pQCT at the ultradistal tibia and ultradistal radius in adults from the Framingham Heart Study (n = 1087, mean age 72 years; 57% women). Radial and tibial failure load in compression were estimated by µFEA. Femoral neck (FN) and ultradistal forearm (UD) aBMD were measured by dual-energy X-ray absorptiometry (DXA). Heritability (h 2 ) of failure load and aBMD and genetic correlations between them was estimated adjusting for covariates (age and sex). Failure load values at the non-weight-bearing ultradistal radius and at the weight-bearing ultradistal tibia were highly correlated (r = 0.906; p < 0.001). Estimates of h 2 adjusted for covariates were 0.522 for the radius and 0.497 for the tibia. Additional adjustment for height did not impact on the h 2 results, but adjustment for aBMD at the UD and FN somewhat decreased h 2 point estimates: 0.222 and 0.380 for radius and tibia, respectively. In bivariate analysis, there was a high phenotypic and genetic correlation between covariate-adjusted failure load at the radius and UD aBMD (ρ P  = 0.826, ρ G  = 0.954, respectively), whereas environmental correlations were lower (ρ E  = 0.696), all highly significant (p < 0.001). Similar correlations were observed between tibial failure load and femoral neck aBMD (ρ P  = 0.577, ρ G  = 0.703, both p < 0.001; ρ E  = 0.432, p < 0.05). These data from adult members of families from a population-based cohort suggest that bone strength of distal extremities estimated by micro-finite element analysis is heritable and shares some genetic composition with areal BMD, regardless of the skeletal site. © 2017 American Society for Bone and Mineral Research. © 2017 American Society for Bone and Mineral Research.

Screen-Based Sedentary Behavior, Physical Activity, and Muscle Strength in the English Longitudinal Study of Ageing

PubMed Central

Hamer, Mark; Stamatakis, Emmanuel

2013-01-01

Background Sarcopenia is associated with loss of independence and ill-health in the elderly although the causes remain poorly understood. We examined the association between two screen-based leisure time sedentary activities (daily TV viewing time and internet use) and muscle strength. Methods and Results We studied 6228 men and women (aged 64.9±9.1 yrs) from wave 4 (2008-09) of the English Longitudinal Study of Ageing, a prospective study of community dwelling older adults. Muscle strength was assessed by a hand grip test and the time required to complete five chair rises. TV viewing and internet usage were inversely associated with one another. Participants viewing TV ≥6hrs/d had lower grip strength (Men, B = −1.20 kg, 95% CI, −2.26, −0.14; Women, −0.75 kg, 95% CI, −1.48, −0.03) in comparison to <2hrs/d TV, after adjustment for age, physical activity, smoking, alcohol, chronic disease, disability, depressive symptoms, social status, and body mass index. In contrast, internet use was associated with higher grip strength (Men, B = 2.43 kg, 95% CI, 1.74, 3.12; Women, 0.76 kg, 95% CI, 0.32, 1.20). These associations persisted after mutual adjustment for both types of sedentary behaviour. Conclusions In older adults, the association between sedentary activities and physical function is context specific (TV viewing vs. computer use). Adverse effects of TV viewing might reflect the prolonged sedentary nature of this behavior. PMID:23755302

Dietary Variety and Decline in Lean Mass and Physical Performance in Community-Dwelling Older Japanese: A 4-year Follow-Up Study.

PubMed

Yokoyama, Y; Nishi, M; Murayama, H; Amano, H; Taniguchi, Y; Nofuji, Y; Narita, M; Matsuo, E; Seino, S; Kawano, Y; Shinkai, S

2017-01-01

To examine associations of dietary variety with changes in lean mass and physical performance during a 4-year period in an elderly Japanese population. Four-year prospective study. The Hatoyama Cohort Study and Kusatsu Longitudinal Study, Japan. 935 community-dwelling Japanese aged 65 years or older. Dietary variety was assessed using a 10-item food frequency questionnaire. Body composition was determined by multifrequency bioelectrical impedance analysis, and physical performance (grip strength and usual gait speed) was measured in surveys at baseline and 4 years later. Longitudinal analysis included only participants who were originally in the upper three quartiles of lean body mass, appendicular lean mass, grip strength, and usual gait speed. The outcome measures were decline in lean body mass, appendicular lean mass, grip strength, and usual gait speed, defined as a decrease to the lowest baseline quartile level at the 4-year follow-up survey. Associations of dietary variety with the outcome measures were examined by logistic regression analysis adjusted for potential confounders. In the fully adjusted model, the odds ratios for decline in grip strength and usual gait speed were 0.43 (95% confidence interval, 0.19-0.99) and 0.43 (confidence interval, 0.19-0.99), respectively, for participants in the highest category of dietary variety score as compared with those in the lowest category. Dietary variety was not significantly associated with changes in lean body mass or appendicular lean mass. Among older adults, greater dietary variety may help maintain physical performance, such as grip strength and usual gait speed, but not lean mass.

Prohibiting consent: what are the costs of denying permanent contraception concurrent with abortion care?

PubMed

Krashin, Jamie W; Edelman, Alison B; Nichols, Mark D; Allen, Allison J; Caughey, Aaron B; Rodriguez, Maria I

2014-07-01

Oregon and federal laws prohibit giving informed consent for permanent contraception when presenting for an abortion. The primary objective of this study was to estimate the number of unintended pregnancies associated with this barrier to obtaining concurrent tubal occlusion and abortion, compared with the current policy, which limits women to obtaining interval tubal occlusion after abortion. The secondary objectives were to compare the financial costs, quality-adjusted life years, and the cost-effectiveness of these policies. We designed a decision-analytic model examining a theoretical population of women who requested tubal occlusion at time of abortion. Model inputs came from the literature. We examined the primary and secondary outcomes stratified by maternal age (>30 and <30 years). A Markov model incorporated the possibility of multiple pregnancies. Sensitivity analyses were performed on all variables and a Monte Carlo simulation was conducted. For every 1000 women age <30 years in Oregon who did not receive requested tubal occlusion at the time of abortion, over 5 years there would be 1274 additional unintended pregnancies and an additional $4,152,373 in direct medical costs. Allowing women to receive tubal occlusion at time of abortion was the dominant strategy. It resulted in both lower costs and greater quality-adjusted life years compared to allowing only interval tubal occlusion after abortion. Prohibiting tubal occlusion at time of abortion resulted in an increased incidence of unintended pregnancy and increased public costs. Copyright © 2014 Mosby, Inc. All rights reserved.

Unwanted sexual advances at work: variations by employment arrangement in a sample of working Australians.

PubMed

Lamontagne, Anthony D; Smith, Peter M; Louie, Amber M; Quinlan, Michael; Shoveller, Jean; Ostry, Aleck S

2009-04-01

We tested the hypothesis that the risk of experiencing unwanted sexual advances at work (UWSA) is greater for precariously-employed workers in comparison to those in permanent or continuing employment. A cross-sectional population-based telephone survey was conducted in Victoria (66% response rate, N=1,101). Employment arrangements were analysed using eight differentiated categories, as well as a four-category collapsed measure to address small cell sizes. Self-report of unwanted sexual advances at work was modelled using multiple logistic regression in relation to employment arrangement, controlling for gender, age, and occupational skill level. Forty-seven respondents reported UWSA in our sample (4.3%), mainly among women (37 of 47). Risk of UWSA was higher for younger respondents, but did not vary significantly by occupational skill level or education. In comparison to Permanent Full-Time, three employment arrangements were strongly associated with UWSA after adjustment for age, gender, and occupational skill level: Casual Full-Time OR = 7.2 (95% Confidence Interval 1.7-30.2); Fixed-Term Contract OR = 11.4 (95% CI 3.4-38.8); and Own-Account Self-Employed OR = 3.8 (95% CI 1.2-11.7). In analyses of females only, the magnitude of these associations was further increased. Respondents employed in precarious arrangements were more likely to report being exposed to UWSA, even after adjustment for age and gender. Greater protections from UWSA are likely needed for precariously employed workers.

Microhardness Testing of Aluminum Alloy Welds

NASA Technical Reports Server (NTRS)

Bohanon, Catherine

2009-01-01

A weld is made when two pieces of metal are united or fused together using heat or pressure, and sometimes both. There are several different types of welds, each having their own unique properties and microstructure. Strength is a property normally used in deciding which kind of weld is suitable for a certain metal or joint. Depending on the weld process used and the heat required for that process, the weld and the heat-affected zone undergo microstructural changes resulting in stronger or weaker areas. The heat-affected zone (HAZ) is the region that has experienced enough heat to cause solid-state microstructural changes, but not enough to melt the material. This area is located between the parent material and the weld, with the grain structure growing as it progresses respectively. The optimal weld would have a short HAZ and a small fluctuation in strength from parent metal to weld. To determine the strength of the weld and decide whether it is suitable for the specific joint certain properties are looked at, among these are ultimate tensile strength, 0.2% offset yield strength and hardness. Ultimate tensile strength gives the maximum load the metal can stand while the offset yield strength gives the amount of stress the metal can take before it is 0.2% longer than it was originally. Both of these are good tests, but they both require breaking or deforming the sample in some way. Hardness testing, however, provides an objective evaluation of weld strengths, and also the difference or variation in strength across the weld and HAZ which is difficult to do with tensile testing. Hardness is the resistance to permanent or plastic deformation and can be taken at any desired point on the specimen. With hardness testing, it is possible to test from parent metal to weld and see the difference in strength as you progress from parent material to weld. Hardness around grain boundaries and flaws in the material will show how these affect the strength of the metal while still retaining the sample. This makes hardness testing a good test for identifying grain size and microstructure.

Investigation of mechanical field weakening of axial flux permanent magnet motor

NASA Astrophysics Data System (ADS)

Syaifuddin Mohd, M.; Aziz, A. Rashid A.; Syafiq Mohd, M.

2015-12-01

An investigation of axial flux permanent magnet motor (AFPM) characteristics was conducted with a proposed mechanical field weakening control mechanisms (by means of stator-rotor force manipulation) on the motor through modeling and experimentation. By varying the air gap between at least two bistable positions, the peak torque and top speed of the motor can be extended. The motor high efficiency region can also be extended to cover greater part of the motor operating points. An analytical model of the motor had been developed to study the correlation between the total attraction force (between the rotor and the stator) and the operating parameters of the motor. The test results shows that the motor output complies with the prediction of the research hypothesis and it is likely that a spring locking mechanism can be built to dynamically adjust the air gap of the motor to increase the operating range and could be applied in electric drivetrain applications to improve overall efficiency of electric and hybrid electric vehicles.

Single-Stage Step up/down Driver for Permanent-Magnet Synchronous Machines

NASA Astrophysics Data System (ADS)

Chen, T. R.; Juan, Y. L.; Huang, C. Y.; Kuo, C. T.

2017-11-01

The two-stage circuit composed of a step up/down dc converter and a three-phase voltage source inverter is usually adopted as the electric vehicle’s motor driver. The conventional topology is more complicated. Additional power loss resulted from twice power conversion would also cause lower efficiency. A single-stage step up/down Permanent-Magnet Synchronous Motor driver for Brushless DC (BLDC) Motor is proposed in this study. The number components and circuit complexity are reduced. The low frequency six-step square-wave control is used to reduce the switching losses. In the proposed topology, only one active switch is gated with a high frequency PWM signal for adjusting the rotation speed. The rotor position signals are fed back to calculate the motor speed for digital close-loop control in a MCU. A 600W prototype circuit is constructed to drive a BLDC motor with rated speed 3000 rpm, and can control the speed of six sections.

A New Adaptive Self-Tuning Fourier Coefficients Algorithm for Periodic Torque Ripple Minimization in Permanent Magnet Synchronous Motors (PMSM)

PubMed Central

Gómez-Espinosa, Alfonso; Hernández-Guzmán, Víctor M.; Bandala-Sánchez, Manuel; Jiménez-Hernández, Hugo; Rivas-Araiza, Edgar A.; Rodríguez-Reséndiz, Juvenal; Herrera-Ruíz, Gilberto

2013-01-01

Torque ripple occurs in Permanent Magnet Synchronous Motors (PMSMs) due to the non-sinusoidal flux density distribution around the air-gap and variable magnetic reluctance of the air-gap due to the stator slots distribution. These torque ripples change periodically with rotor position and are apparent as speed variations, which degrade the PMSM drive performance, particularly at low speeds, because of low inertial filtering. In this paper, a new self-tuning algorithm is developed for determining the Fourier Series Controller coefficients with the aim of reducing the torque ripple in a PMSM, thus allowing for a smoother operation. This algorithm adjusts the controller parameters based on the component's harmonic distortion in time domain of the compensation signal. Experimental evaluation is performed on a DSP-controlled PMSM evaluation platform. Test results obtained validate the effectiveness of the proposed self-tuning algorithm, with the Fourier series expansion scheme, in reducing the torque ripple. PMID:23519345

Testing the stand-alone microbeam at Columbia University.

PubMed

Garty, G; Ross, G J; Bigelow, A W; Randers-Pehrson, G; Brenner, D J

2006-01-01

The stand-alone microbeam at Columbia University presents a novel approach to biological microbeam irradiation studies. Foregoing a conventional accelerator as a source of energetic ions, a small, high-specific-activity, alpha emitter is used. Alpha particles emitted from this source are focused using a compound magnetic lens consisting of 24 permanent magnets arranged in two quadrupole triplets. Using a 'home made' 6.5 mCi polonium source, a 1 alpha particle s(-1), 10 microm diameter microbeam can, in principle, be realised. As the alpha source energy is constant, once the microbeam has been set up, no further adjustments are necessary apart from a periodic replacement of the source. The use of permanent magnets eliminates the need for bulky power supplies and cooling systems required by other types of ion lenses and greatly simplifies operation. It also makes the microbeam simple and cheap enough to be realised in any large lab. The Microbeam design as well as first tests of its performance, using an accelerator-based beam are presented here.

Civil Surgeon Tuberculosis Evaluations for Foreign-Born Persons Seeking Permanent U.S. Residence.

PubMed

Bemis, Kelley; Thornton, Andrew; Rodriguez-Lainz, Alfonso; Lowenthal, Phil; Escobedo, Miguel; Sosa, Lynn E; Tibbs, Andrew; Sharnprapai, Sharon; Moser, Kathleen S; Cochran, Jennifer; Lobato, Mark N

2016-04-01

Foreign-born persons in the United States seeking to adjust their status to permanent resident must undergo screening for tuberculosis (TB) disease. Screening is performed by civil surgeons (CS) following technical instructions by the Centers for Disease Control and Prevention. From 2011 to 2012, 1,369 practicing CS in California, Texas, and New England were surveyed to investigate adherence to the instructions. A descriptive analysis was conducted on 907 (66%) respondents. Of 907 respondents, 739 (83%) had read the instructions and 565 (63%) understood that a chest radiograph is required for status adjustors with TB symptoms; however, only 326 (36%) knew that a chest radiograph is required for immunosuppressed status adjustors. When suspecting TB disease, 105 (12%) would neither report nor refer status adjustors to the health department; 91 (10%) would neither start treatment nor refer for TB infection. Most CS followed aspects of the technical instructions; however, educational opportunities are warranted to ensure positive patient outcomes.

[Curricular adjustments in the clinical fields].

PubMed

Uribe Elías, Roberto

2011-01-01

The 2010 undergraduate medical degree curriculum at the National Autonomous University of Mexico (UNAM) faculty of medicine is based on the reality of the operating structure of the medical care units qualified for teaching. The clinical teaching/learning is based on the cooperative work of the professor and student; this means, it is based on the institutional physician responsible for medical care in a professor/assistant action together with the student being brought up. Therefore, the permanent education and training of all medical teams in the institutions offering teaching is essential. Teaching must be one distinctive characteristic of excellence for the units of the Health Ministry as it is teaching the central factor that raises the quality of medical care. The clinical evaluation must be permanent, improving the value of the daily action in front of a patient at the formative level and as a means to allow the assessment for its development, as it is the clinical aspect that is the essence of medicine.

New Class of Type III Porous Liquids: A Promising Platform for Rational Adjustment of Gas Sorption Behavior

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shan, Weida; Fulvio, Pasquale F.; Kong, Liyun

Porous materials have already manifested their unique properties in a number of fields. Generally, all porous materials are in a solid state other than liquid, in which molecules are closely packed without porosity. “Porous” and “liquid” seem like antonyms. In this paper, we report a new class of Type 3 porous liquids based on rational coupling of microporous framework nanoparticles as porous hosts with a bulky ionic liquid as the fluid media. Positron annihilation lifetime spectroscopy (PALS) and CO 2 adsorption measurements confirm the successful engineering of permanent porosity into these liquids. Compared to common porous solid materials, as-synthesized porousmore » liquids exhibited pronounced hysteresis loops in the CO 2 sorption isotherms even at ambient conditions (298 K, 1 bar). Finally, the unique features of these novel porous liquids could bring new opportunities in many fields including gas separation and storage, air separation and regeneration, gas transport, and permanent gas storage at ambient conditions.« less

New Class of Type III Porous Liquids: A Promising Platform for Rational Adjustment of Gas Sorption Behavior

DOE PAGES

Shan, Weida; Fulvio, Pasquale F.; Kong, Liyun; ...

2017-12-26

Porous materials have already manifested their unique properties in a number of fields. Generally, all porous materials are in a solid state other than liquid, in which molecules are closely packed without porosity. “Porous” and “liquid” seem like antonyms. In this paper, we report a new class of Type 3 porous liquids based on rational coupling of microporous framework nanoparticles as porous hosts with a bulky ionic liquid as the fluid media. Positron annihilation lifetime spectroscopy (PALS) and CO 2 adsorption measurements confirm the successful engineering of permanent porosity into these liquids. Compared to common porous solid materials, as-synthesized porousmore » liquids exhibited pronounced hysteresis loops in the CO 2 sorption isotherms even at ambient conditions (298 K, 1 bar). Finally, the unique features of these novel porous liquids could bring new opportunities in many fields including gas separation and storage, air separation and regeneration, gas transport, and permanent gas storage at ambient conditions.« less

New Class of Type III Porous Liquids: A Promising Platform for Rational Adjustment of Gas Sorption Behavior.

PubMed

Shan, Weida; Fulvio, Pasquale F; Kong, Liyun; Schott, Jennifer A; Do-Thanh, Chi-Linh; Tian, Tao; Hu, Xunxiang; Mahurin, Shannon M; Xing, Huabin; Dai, Sheng

2018-01-10

Porous materials have already manifested their unique properties in a number of fields. Generally, all porous materials are in a solid state other than liquid, in which molecules are closely packed without porosity. "Porous" and "liquid" seem like antonyms. Herein, we report a new class of Type 3 porous liquids based on rational coupling of microporous framework nanoparticles as porous hosts with a bulky ionic liquid as the fluid media. Positron annihilation lifetime spectroscopy (PALS) and CO 2 adsorption measurements confirm the successful engineering of permanent porosity into these liquids. Compared to common porous solid materials, as-synthesized porous liquids exhibited pronounced hysteresis loops in the CO 2 sorption isotherms even at ambient conditions (298 K, 1 bar). The unique features of these novel porous liquids could bring new opportunities in many fields including gas separation and storage, air separation and regeneration, gas transport, and permanent gas storage at ambient conditions.

Design and Development of a Prototype Permanent Magnet for Focusing/Defocusing for Electron-Ion Colliders

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, Bob

Electron-ion colliders (EIC) have been identified as an ideal tool to study the next frontier of nuclear physics – the gluon force that holds the building blocks of matter together, and which is a fundamental component of the theory of Quantum Chromodynamics (QCD). Future electron-ion colliders under consideration can be based on the Energy Recovery Linac (ERL) architecture. The beam lines for this architecture could be built of the newly developed Non-Scaling Fixed Field Alternating Gradient (NS FFAG) structure, so that they can transfer multiple energies within the same aperture. This structure allows for the use of compact, economical quadupolemore » permanent magnets. In this SBIR, we propose to design and to manufacture prototype quadrupole permanent magnets of focusing/defocusing combined function for use in this beam line. For our SBIR project, we proposed to design and build the focusing/defocusing quadrupole with a gradient strength of 50 T/m and with a beam gap of 16mm. The proposed permanent magnet material is SmCo because of its higher radiation resistance as compared to NdBFe2. The use of permanent magnets will reduce the overall cost. For Phase I, we took a recent design by Dr. Dejan Trbojevic, and reran Tosca code on the design to optimize the iron yoke with respect to the thickness of SmCo. We then fabricated one prototype focusing/defocusing combined function quadruple and measured field quality dG/Go. Our plan for Phase II is that, based on our Phase I prototype experience, we shall improve the design and fabricate a production quadruple, and design and incorporate coils for skew dipoles and normal quadrupole correctors, etc. In addition, we shall fabricate enough quadrupoles for one cell. The development of quadrupole permanent magnets is of fundamental importance for there application in the future electron-ion colliders. This accelerator structure will also advance the development of muon accelerators and allow for the development of compact, simplified, less expensive proton accelerators which will promote their use in areas such as proton cancer therapy, and for high-power proton drivers for tritium and neutron production, waste transmutation, driving a sub-critical nuclear reactor to produce energy, cargo contain inspection, and radioisotope production. Proton cancer therapy has been identified as a particularly attractive and viable commercial application for the immediate future.« less

Confined compressive strength analysis can improve PDC bit selection. [Polycrystalline Diamond Compact

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fabain, R.T.

1994-05-16

A rock strength analysis program, through intensive log analysis, can quantify rock hardness in terms of confined compressive strength to identify intervals suited for drilling with polycrystalline diamond compact (PDC) bits. Additionally, knowing the confined compressive strength helps determine the optimum PDC bit for the intervals. Computing rock strength as confined compressive strength can more accurately characterize a rock's actual hardness downhole than other methods. the information can be used to improve bit selections and to help adjust drilling parameters to reduce drilling costs. Empirical data compiled from numerous field strength analyses have provided a guide to selecting PDC drillmore » bits. A computer analysis program has been developed to aid in PDC bit selection. The program more accurately defines rock hardness in terms of confined strength, which approximates the in situ rock hardness downhole. Unconfined compressive strength is rock hardness at atmospheric pressure. The program uses sonic and gamma ray logs as well as numerous input data from mud logs. Within the range of lithologies for which the program is valid, rock hardness can be determine with improved accuracy. The program's output is typically graphed in a log format displaying raw data traces from well logs, computer-interpreted lithology, the calculated values of confined compressive strength, and various optional rock mechanic outputs.« less

Evaluating injury risk in first and second league professional Portuguese soccer: muscular strength and asymmetry.

PubMed

Carvalho, Alberto; Brown, Scott; Abade, Eduardo

2016-06-01

Strength imbalances between the hamstrings and quadriceps are an essential predictor for hamstring strain in soccer. The study aimed to investigate and compare the muscle strength imbalances of professional soccer players of different performance levels. One hundred and fifty nine senior male professional soccer players from first (n = 75) and second league (n = 84) Portuguese clubs participated in this study. Muscle strength was evaluated with a REV9000 isokinetic dynamometer. Maximal peak torque data were used to calculate quadriceps and hamstrings strength during concentric and eccentric actions, bilateral asymmetry, conventional strength ratios and dynamic control ratios. Second league athletes produced slightly lower conventional strength ratios in the right and left legs (ES = 0.22, p = 0.17 and ES = 0.36, p = 0.023, respectively) compared to the first league athletes. No significant differences were found in dynamic control ratios or in bilateral asymmetry among first and second league athletes. These findings do not show a clear link between the competitive level and injury risk in soccer players. However, some of the differences found, particularly in conventional strength ratios, highlight the importance of performing off-season and pre-season strength assessments to prescribe and adjust individual strength training programs among professional soccer players.

Evaluating injury risk in first and second league professional Portuguese soccer: muscular strength and asymmetry

PubMed Central

Carvalho, Alberto; Brown, Scott

2016-01-01

Abstract Strength imbalances between the hamstrings and quadriceps are an essential predictor for hamstring strain in soccer. The study aimed to investigate and compare the muscle strength imbalances of professional soccer players of different performance levels. One hundred and fifty nine senior male professional soccer players from first (n = 75) and second league (n = 84) Portuguese clubs participated in this study. Muscle strength was evaluated with a REV9000 isokinetic dynamometer. Maximal peak torque data were used to calculate quadriceps and hamstrings strength during concentric and eccentric actions, bilateral asymmetry, conventional strength ratios and dynamic control ratios. Second league athletes produced slightly lower conventional strength ratios in the right and left legs (ES = 0.22, p = 0.17 and ES = 0.36, p = 0.023, respectively) compared to the first league athletes. No significant differences were found in dynamic control ratios or in bilateral asymmetry among first and second league athletes. These findings do not show a clear link between the competitive level and injury risk in soccer players. However, some of the differences found, particularly in conventional strength ratios, highlight the importance of performing off-season and pre-season strength assessments to prescribe and adjust individual strength training programs among professional soccer players. PMID:28149364

Forming of AHSS using Servo-Presses

NASA Astrophysics Data System (ADS)

Groseclose, Adam Richard

Stamping of Advanced High Strength Steel (AHSS) alloys poses several challenges due to the material's higher strength and low formability compared to conventional steels and other problems such as (a) inconsistency of incoming material properties, (b) ductile fracture during forming, (c) higher contact pressure and temperature rise during forming, (d) higher die wear leading to reduced tool life, (e) higher forming load/press capacity, and (f) large springback leading to dimensional inaccuracy in the formed part. [Palaniswamy et. al., 2007]. The use of AHSS has been increasing steadily in automotive stamping. New AHSS alloys (TRIP, TWIP) may replace some of the Hot Stamping applications. Stamping of AHSS alloys, especially higher strength materials, 780 MPa and higher, present new challenges in obtaining good part definition (corner and fillet radii), formability (fracture and resulting scrap) and in reducing springback. Servo-drive presses, having the capability to have infinitely variable and adjustable ram speed and dwell at BDC, offer a potential improvement in quality, part definition, and springback reduction especially when the infinitely adjustable slide motion is used in combination with a CNC hydraulic cushion. Thus, it is desirable to establish a scientific/engineering basis for improving the stamping conditions in forming AHSS using a servo-drive press.

Properties-Adjustable Alumina-Zirconia Nanolaminate Dielectric Fabricated by Spin-Coating.

PubMed

Peng, Junbiao; Wei, Jinglin; Zhu, Zhennan; Ning, Honglong; Cai, Wei; Lu, Kuankuan; Yao, Rihui; Tao, Hong; Zheng, Yanqiong; Lu, Xubing

2017-11-29

In this paper, an alumina-zirconia (Al₂O₃-ZrO₂) nanolaminate dielectric was fabricated by spin-coating and the performance was investigated. It was found that the properties of the dielectric can be adjusted by changing the content of Al₂O₃/ZrO₂ in nanolaminates: when the content of Al₂O₃ was higher than 50%, the properties of nanolaminates, such as the optical energy gap, dielectric strength (V ds ), capacitance density, and relative permittivity were relatively stable, while the change of these properties became larger when the content of Al₂O₃ was less than 50%. With the content of ZrO₂ varying from 50% to 100%, the variation of these properties was up to 0.482 eV, 2.12 MV/cm, 135.35 nF/cm², and 11.64, respectively. Furthermore, it was demonstrated that the dielectric strength of nanolaminates were influenced significantly by the number (n) of bilayers. Every increment of one Al₂O₃-ZrO 2 bilayer will enhance the dielectric strength by around 0.39 MV/cm (V ds ≈ 0.86 + 0.39n). This could be contributed to the amorphous alumina which interrupted the grain boundaries of zirconia.

Random-anisotropy model: Monotonic dependence of the coercive field on D/J

NASA Astrophysics Data System (ADS)

Saslow, W. M.; Koon, N. C.

1994-02-01

We present the results of a numerical study of the zero-temperature remanence and coercivity for the random anisotropy model (RAM), showing that, contrary to early calculations for this model, the coercive field increases monotonically with increases in the strength D of the random anisotropy relative to the strength J at the exchange field. Local-field adjustments with and without spin flips are considered. Convergence is difficult to obtain for small values of the anisotropy, suggesting that this is the likely source of the nonmonotonic behavior found in earlier studies. For both large and small anisotropy, each spin undergoes about one flip per hysteresis cycle, and about half of the spin flips occur in the vicinity of the coercive field. When only non-spin-flip adjustments are considered, at large anisotropy the coercivity is proportional to the anisotropy. At small anisotropy, the rate of convergence is comparable to that when spin flips are included.

Tensile bond strength of an adhesive resin cement to different alloys having various surface treatments.

PubMed

Abreu, Amara; Loza, Maria A; Elias, Augusto; Mukhopadhyay, Siuli; Looney, Stephen; Rueggeberg, Frederick A

2009-02-01

The ability of a resin cement to bond to a restorative alloy is critical for maximal crown retention to nonideal preparations. Surface treatment and metal type may have an important role in optimizing resin-to-metal strength. The purpose of this study was to examine the effect of surface pretreatment on the tensile strength of base and noble metals bonded using a conventional resin cement. Cylindrical plastic rods (9.5 mm in diameter), cast in base (Rexillium NBF) or noble metal (IPS d.SIGN 53), were divided into rods 10 mm in length (n=10-12). Specimens were heated in a porcelain furnace to create an oxide layer. Test specimens were further subjected to airborne-particle abrasion (50-microm Al(2)O(3) particles) alone or with the application of a metal primer (Alloy Primer). Similarly treated rod ends were joined using resin cement (RelyX ARC), thermocycled (x500, 5 degrees -55 degrees C) and stored (24 hours, 37 degrees C) before debonding using a universal testing machine. Debond strength and failure site were recorded. Rank-based ANOVA for unbalanced designs was used to test for significant interaction (alpha=.050). Each pair of treatments was compared separately for each metal (Bonferroni-adjusted significance level of .0083, overall error rate for comparisons, .05). The 2 metals were compared separately for each of the 3 treatments using an adjusted significance level of .017, maintaining an overall error rate of .05. A multinomial logit model was used to describe the effect of metal type and surface pretreatment on failure site location (alpha=.05). Interaction between metal type and surface pretreatment was significant for stress values (P=.019). Metal type did not significantly affect tensile bond strength for any of the compared surface pretreatments. Metal primer significantly improved tensile bond strength for each metal type. Most failures tended to occur as either adhesive or mixed in nature. Metal primer application significantly enhanced tensile bond strength to base and noble metal. No significant differences in tensile strength were found between alloys. Differences in failure site incidence were found to be related to metal type and surface pretreatment.

Impact of childhood and adulthood psychological health on labour force participation and exit in later life.

PubMed

Clark, C; Smuk, M; Lain, D; Stansfeld, S A; Carr, E; Head, J; Vickerstaff, S

2017-07-01

Adulthood psychological health predicts labour force activity but few studies have examined childhood psychological health. We hypothesized that childhood psychological ill-health would be associated with labour force exit at 55 years. Data were from the 55-year follow-up of the National Child Development Study (n = 9137). Labour force participation and exit (unemployment, retirement, permanent sickness, homemaking/other) were self-reported at 55 years. Internalizing and externalizing problems in childhood (7, 11 and 16 years) and malaise in adulthood (23, 33, 42, 50 years) were assessed. Education, social class, periods of unemployment, partnership separations, number of children, and homemaking activity were measured throughout adulthood. Childhood internalizing and externalizing problems were associated with unemployment, permanent sickness and homemaking/other at 55 years, after adjustment for adulthood psychological health and education: one or two reports of internalizing was associated with increased risk for unemployment [relative risk (RR) 1.59, 95% confidence interval (CI) 1.12-2.25; RR 2.37, 95% CI 1.48-3.79] and permanent sickness (RR 1.32, 95% CI 1.00-1.74; RR, 1.48, 95% CI 1.00-2.17); three reports of externalizing was associated with increased risk for unemployment (RR 2.26, 95% CI 1.01-5.04), permanent sickness (RR 2.63, 95% CI 1.46-4.73) and homemaking/other (RR 1.95, 95% CI 1.00-3.78). Psychological ill-health across the lifecourse, including during childhood, reduces the likelihood of working in older age. Support for those with mental health problems at different life stages and for those with limited connections to the labour market, including homemakers, is an essential dimension of attempts to extend working lives.

Neighborhood Environments and Physical Activity: A Longitudinal Study of Adolescents in a Natural Experiment.

PubMed

Nicosia, Nancy; Datar, Ashlesha

2018-05-01

Experimental and quasi-experimental evidence on the relationship between adolescents' physical activity and their physical activity environments is scarce. This study provides natural experimental evidence using within-person longitudinal variation in physical activity environments resulting from the compulsory re-assignment of military families to new installations, termed permanent changes of station. Adolescents in Army families (N=749) reported usual weekly minutes of moderate and vigorous physical activity in 2013-2015. Objective measures of the physical activity environment, including the number of fitness and recreation facilities within 2 miles, were constructed for adolescents' neighborhoods using GIS methods. In 2017, individual-level fixed-effects models with and without a comparison group estimated the relationship between usual weekly minutes of physical activity and physical activity environments among permanent changes of station movers using within-person variation. Increases in opportunities for physical activity were significantly and positively associated with increases in total (p<0.05) and vigorous physical activity (p<0.05) among adolescents who experienced permanent changes of station moves. The relationships were statistically significant for permanent changes of station movers living off-installation (p<0.05) and hence subject to greater variation in physical activity environments and those with more time to adjust to their new environments (p<0.05). Significant findings persisted when broader measures of physical activity environments were utilized. The decline in physical activity and alarming obesity levels during adolescence suggest that this age may represent an important opportunity to address the obesity epidemic. This study provides evidence that increasing opportunities for physical activity may be an important pathway to improving their levels of physical activity and, consequently, obesity. Copyright © 2018 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

School playgrounds and physical activity policies as predictors of school and home time activity

PubMed Central

2011-01-01

Background Previous work has suggested that the number of permanent play facilities in school playgrounds and school-based policies on physical activity can influence physical activity in children. However, few comparable studies have used objective measures of physical activity or have had little adjustment for multiple confounders. Methods Physical activity was measured by accelerometry over 5 recess periods and 3 full school days in 441 children from 16 primary schools in Dunedin, New Zealand. The number of permanent play facilities (swing, fort, slide, obstacle course, climbing wall etc) in each school playground was counted on three occasions by three researchers following a standardized protocol. Information on school policies pertaining to physical activity and participation in organized sport was collected by questionnaire. Results Measurement of school playgrounds proved to be reliable (ICC 0.89) and consistent over time. Boys were significantly more active than girls (P < 0.001), but little time overall was spent in moderate-vigorous physical activity (MVPA). Boys engaged in MVPA for 32 (SD 17) minutes each day of which 17 (10) took place at school compared with 23 (14) and 11 (7) minutes respectively in girls. Each additional 10-unit increase in play facilities was associated with 3.2% (95% CI 0.0-6.4%) more total activity and 8.3% (0.8-16.3%) more MVPA during recess. By contrast, school policy score was not associated with physical activity in children. Conclusion The number of permanent play facilities in school playgrounds is associated with higher physical activity in children, whereas no relationship was observed for school policies relating to physical activity. Increasing the number of permanent play facilities may offer a cost-effective long-term approach to increasing activity levels in children. PMID:21521530

Modeling the Association Between Home Care Service Use and Entry Into Residential Aged Care: A Cohort Study Using Routinely Collected Data.

PubMed

Jorgensen, Mikaela; Siette, Joyce; Georgiou, Andrew; Warland, Andrew; Westbrook, Johanna

2018-02-01

To examine home care service-related and person-based factors associated with time to entry into permanent residential aged care. Longitudinal cohort study using routinely collected client management data. A large aged care service provider in New South Wales and the Australian Capital Territory, Australia. A total of 1116 people aged 60 years and older who commenced home care services for higher-level needs between July 1, 2015 and June 30, 2016. Survival analysis methods were used to examine service-related and person-based factors that were associated with time between first home care service and entry into permanent residential aged care. Predictors included service hours per week, combination of service types, demographics, needs, hospital leave, and change in care level. Cluster analysis was used to determine patterns of types of services used. By December 31, 2016, 21.1% of people using home care services had entered into permanent residential care (n = 235). After adjusting for significant factors such as age and care needs, each hour of service received per week was associated with a 6% lower risk of entry into residential care (hazard ratio = 0.94, 95% confidence interval 0.90-0.98). People who were predominant users of social support services, those with an identified carer, and those born in a non-main English-speaking country also remained in their own homes for longer. Greater volume of home care services was associated with significantly delayed entry into permanent residential care. This study provides much-needed evidence about service outcomes that could be used to inform older adults' care choices. Crown Copyright © 2017. Published by Elsevier Inc. All rights reserved.

Longitudinal associations of experiences of adversity and socioeconomic disadvantage during childhood with labour force participation and exit in later adulthood.

PubMed

Fahy, A E; Stansfeld, S A; Smuk, M; Lain, D; van der Horst, M; Vickerstaff, S; Clark, C

2017-06-01

The Extending Working Lives (EWL) agenda seeks to sustain employment up to and beyond traditional retirement ages. This study examined the potential role of childhood factors in shaping labour force participation and exit among older adults, with a view to informing proactive interventions early in the life-course to enhance individuals' future capacity for extending their working lives. Childhood adversity and socioeconomic disadvantage have previously been linked to ill-health across the life-span and sickness benefit in early adulthood. This study builds upon previous research by examining associations between childhood adversity and self-reported labour force participation among older adults (aged 55). Data was from the National Child Development Study - a prospective cohort of all English, Scottish, & Welsh births in one week in 1958. There was evidence for associations between childhood adversity and increased risk of permanent sickness at 55 years - which were largely sustained after adjustment for educational disengagement and adulthood factors (mental/physical health, qualifications, socioeconomic disadvantage). Specifically, children who were abused or neglected were more likely to be permanently sick at 55 years. In addition, among males, those in care, those experiencing illness in the home, and those experiencing two or more childhood adversities were more likely to be permanently sick at 55 years. Childhood factors were also associated with part-time employment and retirement at 55 years. Severe childhood adversities may represent important distal predictors of labour force exit at 55 years, particularly via permanent sickness. Notably, some adversities show associations among males only, which may inform interventions designed to extend working lives. Copyright © 2017 Elsevier Ltd. All rights reserved.

Permanent cardiac pacing in patients with end-stage renal disease undergoing dialysis.

PubMed

Wang, I-Kuan; Lin, Kuo-Hung; Lin, Shih-Yi; Lin, Cheng-Li; Chang, Chiz-Tzung; Yen, Tzung-Hai; Sung, Fung-Chang

2016-12-01

Studies investigating the risk of cardiac dysrhythmia warranting permanent pacemaker therapy for end-stage renal disease (ESRD) patients are limited. This study investigated the incidence rate of permanent cardiac pacing in dialysis patients. Using the Taiwan National Health Insurance Database, we identified 28 471 newly diagnosed ESRD patients in 2000-2010 [9700 on peritoneal dialysis (PD) and 18 771 on hemodialysis (HD)] and 113 769 randomly selected controls without kidney disease, frequency-matched by sex, age and diagnosis date. We also established propensity score-matched HD and PD cohorts with 9700 patients each. Incidence rates and hazard ratios (HRs) of implantation were evaluated by the end of 2011. Complications were also evaluated among patients with implantation. The incidence rates of permanent pacemaker implantation were 5.93- and 3.50-fold greater in HD and PD patients than in controls (1.44 and 0.85 versus 0.24 per 1000 person-years, respectively). The adjusted HRs (aHRs) of implantation were 3.26 [95% confidence interval (CI) = 2.41-4.42] and 2.36 (95% CI = 1.56-3.58) for HD and PD patients, respectively, compared with controls. The pacemaker implantation rate was 0.33 per 1000 person-years greater in the propensity score-matched HD cohort than in the PD cohort, with an aHR of 1.30 (95% CI = 0.82-2.05) for the HD cohort compared with the PD cohort. Dialysis patients are at an increased risk of dysrhythmia requiring pacemaker implantation compared with the general population. The risks are not significantly different between HD and PD patients. © The Author 2016. Published by Oxford University Press on behalf of ERA-EDTA. All rights reserved.