Science.gov

Sample records for adsorbent recycling system

  1. An effective and recyclable adsorbent for the removal of heavy metal ions from aqueous system: Magnetic chitosan/cellulose microspheres.

    PubMed

    Luo, Xiaogang; Zeng, Jian; Liu, Shilin; Zhang, Lina

    2015-10-01

    Development of highly cost-effective, highly operation-convenient and highly efficient natural polymer-based adsorbents for their biodegradability and biocompatibility, and supply of safe drinking water are the most threatening problems in water treatment field. To tackle the challenges, a new kind of efficient recyclable magnetic chitosan/cellulose hybrid microspheres was prepared by sol-gel method. By embedding magnetic γ-Fe2O3 nanoparticles in chitosan/cellulose matrix drops in NaOH/urea aqueous solution, it combined renewability and biocompatibility of chitosan and cellulose as well as magnetic properties of γ-Fe2O3 to create a hybrid system in heavy metal ions removal.

  2. Elution by Le Chatelier's principle for maximum recyclability of adsorbents: applied to polyacrylamidoxime adsorbents for extraction of uranium from seawater.

    PubMed

    Oyola, Yatsandra; Vukovic, Sinisa; Dai, Sheng

    2016-05-28

    Amidoxime-based polymer adsorbents have attracted interest within the last decade due to their high adsorption capacities for uranium and other rare earth metals from seawater. The ocean contains an approximated 4-5 billion tons of uranium and even though amidoxime-based adsorbents have demonstrated the highest uranium adsorption capacities to date, they are still economically impractical because of their limited recyclability. Typically, the adsorbed metals are eluted with a dilute acid solution that not only damages the amidoxime groups (metal adsorption sites), but is also not strong enough to remove the strongly bound vanadium, which decreases the adsorption capacity with each cycle. We resolved this challenge by incorporating Le Chatelier's principle to recycle adsorbents indefinitely. We used a solution with a high concentration of amidoxime-like chelating agents, such as hydroxylamine, to desorb nearly a 100% of adsorbed metals, including vanadium, without damaging the metal adsorption sites and preserving the high adsorption capacity. The method takes advantage of knowing the binding mode between the amidoxime ligand and the metal and mimics it with chelating agents that then in a Le Chatelier's manner removes metals by shifting to a new chemical equilibrium. For this reason the method is applicable to any ligand-metal adsorbent and it will make an impact on other extraction technologies. PMID:27117598

  3. Fuels from Recycling Systems

    ERIC Educational Resources Information Center

    Tillman, David A.

    1975-01-01

    Three systems, operating at sufficient scale, produce fuels that may be alternatives to oil and gas. These three recycling systems are: Black Clawson Fiberclaim, Franklin, Ohio; Union Carbide, South Charleston, West Virginia; and Union Electric, St. Louis, Missouri. These produce a wet fuel, a pyrolytic gas, and a dry fuel, respectively. (BT)

  4. Center-cut separation of intermediately adsorbing target component by 8-zone simulated moving bed chromatography with internal recycle.

    PubMed

    Kiwala, Dawid; Mendrella, Jadwiga; Antos, Dorota; Seidel-Morgenstern, Andreas

    2016-07-01

    An 8-zone simulated moving bed chromatography with internal recycle (8ZSMB-IR) has been designed for center-cut separation, that is, for isolating an intermediately adsorbed component out of a multicomponent mixture. The system consists of two integrated subunits and operates in a fully continuous manner. In the first subunit the feed mixture is split into two fractions containing either a single component or a binary mixture. The binary mixture is recycled through the internal raffinate or extract port into the second subunit, where the target product is isolated. Additionally, the solvent is also recycled internally. For a case study, the separation of a ternary mixture of cycloketones as a model system under weakly non-linear isotherm conditions has been investigated. A few novel configurations of the 8ZSMB-IR unit including the arrangement of the internal recycle of extract, raffinate and solvent streams between two subunits have been examined with respect to various performance indicators for the process realization. The unit performed best with the developed configuration when the internal raffinate stream was recycled and the solvent recycling loop was closed between the last and the first zone of the first subunit. That configuration has further been analyzed experimentally and numerically. On the basis of the results a strategy for determining reliable operating conditions for the 8ZSMB-IR process has been developed. The procedure exploited a model of the process dynamics, which was implemented to refine the isotherm coefficients and to quantify the mixing effect of the liquid stream inside the recycling loops. The upgraded model with the adjusted parameters has been validated based on experimental data and successfully applied for optimizing the operating conditions of the separation.

  5. Removal and recycle of phosphate from treated water of sewage plants with zirconium ferrite adsorbent by high gradient magnetic separation

    NASA Astrophysics Data System (ADS)

    Ito, D.; Nishimura, K.; Miura, O.

    2009-03-01

    Zirconium ferrite particles are good adsorbent for phosphate ions. Magnetic separation characteristics for removal of phosphate from treated water of sewage plants with the adsorbent have been studied to prevent eutrophication of semi-enclosed bay, e.g. the bay of Tokyo. Based on the adsorption for the phosphate ions and ferromagnetic properties of the zirconium ferrite adsorbent, high gradient magnetic separation characteristics with using superconducting magnet was discussed. Very rapid magnetic filtration velocity, i.e. 1m/s, and regeneration properties of the adsorbent indicate that the zirconium ferrite is the excellent adsorbent for phosphorus removal and recycle from treated water of large scale sewage plants.

  6. CFC recycling system

    SciTech Connect

    Furmanek, D.J.

    1991-06-25

    This patent describes a method for recycling freon. It comprises attaching a freon removal valve to a freon supply located in an appliance such as an air conditioner, refrigerator, freezer or the like, positioning a substantially empty freon collecting vessel in gas flow relationship to the valve by providing the freon removal valve with a puncture needle extending upwardly and adapted to puncture a freon supply tubing in the appliance, below the puncture needle is positioned a spring means, and below the spring means is positioned a piercing means adapted to pierce a closure in the collecting vessel to thereby establish a gas passage means extending from the supply tube, through the needle, through the piercing means to the collecting vessel, collecting the freon thereby in the collecting vessel, providing a substantially gas-free sealing means on the collecting vessel to insure substantial total containment of the freon within the collecting vessel, and delivering the collecting vessel to a collection center for reuse and recycling of the freon.

  7. Facile preparation of highly hydrophilic, recyclable high-performance polyimide adsorbents for the removal of heavy metal ions.

    PubMed

    Huang, Jieyang; Zheng, Yaxin; Luo, Longbo; Feng, Yan; Zhang, Chaoliang; Wang, Xu; Liu, Xiangyang

    2016-04-01

    To obtain high-performance adsorbents that combine excellent adsorption ability, thermal stability, service life and recycling ability, polyimide (PI)/silica powders were prepared via a facile one-pot coprecipitation process. A benzimidazole unit was introduced into the PI backbone as the adsorption site. The benzimidazole unit induced more hydroxyls onto the silica, which provided hydrophilic sites for access by heavy metal ions. By comprehensively analyzing the effect of hydrophilcity, agglomeration, silica polycondensation, specific surface area and PI crystallinity, 10% was demonstrated to be the most proper feed silica content. The equilibrium adsorption amount (Qe) for Cu(2+) of PI/silica adsorbents was 77 times higher than that of pure PI. Hydrogen chloride (HCl) was used as a desorbent for heavy metal ions and could be decomplexed with benzimidazole unit at around 300°C, which was lower than the glass transition temperature of PI. The complexation and decomplexation process of HCl made PI/silica adsorbents recyclable, and the adsorption ability remained steady for more than 50 recycling processes. As PI/silica adsorbents possess excellent thermal stability, chemical resistance and radiation resistance and hydrophilicity, they have potential as superior recyclable adsorbents for collecting heavy metal ions from waste water in extreme environments. PMID:26736172

  8. Unoccupied electronic states in adsorbate systems

    NASA Astrophysics Data System (ADS)

    Bertel, E.

    1991-11-01

    Experimental work on unoccupied electronic states in adsorbate systems on metallic substrates is reviewed with emphasis on recent developments. The first part is devoted to molecular adsorbates. Weakly chemisorbed hydrocarbons are briefly discussed. An exhaustive inverse photoemission (IPE) study of the CO bond to the transition metals Ni, Pb, and Pt is presented. Adsorbed NO is taken as an example to demonstrate the persisting discrepancies in the interpretation of IPE spectra. Atomic adsorbates are discussed in the second part. The quantum well state model is applied to interpret the surface states in reconstructing and non-reconstructing adsorption systems of alkali metals and hydrogen. A recent controversy on the unoccupied electronic states of the Cu(110)/O p(2×1) surface is critically reviewed. The quantum well state model is then compared to tight binding and local-density-functional calculations of the unoccupied bands and the deficiencies of the various approaches are pointed out. Finally, the relation between the surface state model and more chemically oriented models of surface bonding is briefly discussed.

  9. Orbital tomography for highly symmetric adsorbate systems

    NASA Astrophysics Data System (ADS)

    Stadtmüller, B.; Willenbockel, M.; Reinisch, E. M.; Ules, T.; Bocquet, F. C.; Soubatch, S.; Puschnig, P.; Koller, G.; Ramsey, M. G.; Tautz, F. S.; Kumpf, C.

    2012-10-01

    Orbital tomography is a new and very powerful tool to analyze the angular distribution of a photoemission spectroscopy experiment. It was successfully used for organic adsorbate systems to identify (and consequently deconvolute) the contributions of specific molecular orbitals to the photoemission data. The technique was so far limited to surfaces with low symmetry like fcc(110) oriented surfaces, owing to the small number of rotational domains that occur on such surfaces. In this letter we overcome this limitation and present an orbital tomography study of a 3,4,9,10-perylene-tetra-carboxylic-dianhydride (PTCDA) monolayer film adsorbed on Ag(111). Although this system exhibits twelve differently oriented molecules, the angular resolved photoemission data still allow a meaningful analysis of the different local density of states and reveal different electronic structures for symmetrically inequivalent molecules. We also discuss the precision of the orbital tomography technique in terms of counting statistics and linear regression fitting algorithm. Our results demonstrate that orbital tomography is not limited to low-symmetry surfaces, a finding which makes a broad field of complex adsorbate systems accessible to this powerful technique.

  10. Cost effectiveness of recycling: A systems model

    SciTech Connect

    Tonjes, David J.; Mallikarjun, Sreekanth

    2013-11-15

    Highlights: • Curbside collection of recyclables reduces overall system costs over a range of conditions. • When avoided costs for recyclables are large, even high collection costs are supported. • When avoided costs for recyclables are not great, there are reduced opportunities for savings. • For common waste compositions, maximizing curbside recyclables collection always saves money. - Abstract: Financial analytical models of waste management systems have often found that recycling costs exceed direct benefits, and in order to economically justify recycling activities, externalities such as household expenses or environmental impacts must be invoked. Certain more empirically based studies have also found that recycling is more expensive than disposal. Other work, both through models and surveys, have found differently. Here we present an empirical systems model, largely drawn from a suburban Long Island municipality. The model accounts for changes in distribution of effort as recycling tonnages displace disposal tonnages, and the seven different cases examined all show that curbside collection programs that manage up to between 31% and 37% of the waste stream should result in overall system savings. These savings accrue partially because of assumed cost differences in tip fees for recyclables and disposed wastes, and also because recycling can result in a more efficient, cost-effective collection program. These results imply that increases in recycling are justifiable due to cost-savings alone, not on more difficult to measure factors that may not impact program budgets.

  11. NiO(111) nanosheets as efficient and recyclable adsorbents for dye pollutant removal from wastewater

    NASA Astrophysics Data System (ADS)

    Song, Zhi; Chen, Lifang; Hu, Juncheng; Richards, Ryan

    2009-07-01

    Semiconductor single-crystalline polar NiO(111) nanosheets with well-defined hexagonal holes have been investigated for application in dye adsorption and combustion processes. With regard to adsorption technologies, high surface area metal oxides have an advantage over activated carbon in that the adsorbed species can be combusted and the adsorbent reused in the case of metal oxides while regeneration of activated carbon remains challenging and thus the adsorbent/adsorbate system must be disposed of. Here, three typical textile dyes, reactive brilliant red X-3B, congo red and fuchsin red, were studied for removal from wastewater with two NiO systems and activated carbon. These studies revealed that the NiO(111) nanosheets exhibited much more favorable adsorptive properties than conventionally prepared nickel oxide powder (CP-NiO) obtained from thermal decomposition of nickel nitrate. The maximum adsorption capabilities of the three dyes on NiO(111) nanosheets reached 30.4 mg g-1, 35.15 mg g-1 and 22 mg g-1 for reactive brilliant red X-3B, congo red and fuchsin acid, respectively, while the maximum adsorption capabilities of the three dyes on CP-NiO were only 8.4, 13.2 and 12 mg g-1 for reactive brilliant red X-3B, congo red and fuchsin acid. To simulate the adsorption isotherm, two commonly employed models, the Langmuir and the Freundlich isotherms, were selected to explicate the interaction of the dye and NiO(111). The isotherm evaluations revealed that the Langmuir model demonstrated better fit to experimental equilibrium data than the Freundlich model. The maximum predicted adsorption capacity was 36.1 mg g-1. In addition, adsorption kinetic data of NiO(111) followed a pseudo-second-order rate for congo red. These studies infer that NiO(111) nanosheets possess desirable properties for application in adsorption and combustion applications.

  12. Cost effectiveness of recycling: a systems model.

    PubMed

    Tonjes, David J; Mallikarjun, Sreekanth

    2013-11-01

    Financial analytical models of waste management systems have often found that recycling costs exceed direct benefits, and in order to economically justify recycling activities, externalities such as household expenses or environmental impacts must be invoked. Certain more empirically based studies have also found that recycling is more expensive than disposal. Other work, both through models and surveys, have found differently. Here we present an empirical systems model, largely drawn from a suburban Long Island municipality. The model accounts for changes in distribution of effort as recycling tonnages displace disposal tonnages, and the seven different cases examined all show that curbside collection programs that manage up to between 31% and 37% of the waste stream should result in overall system savings. These savings accrue partially because of assumed cost differences in tip fees for recyclables and disposed wastes, and also because recycling can result in a more efficient, cost-effective collection program. These results imply that increases in recycling are justifiable due to cost-savings alone, not on more difficult to measure factors that may not impact program budgets.

  13. Recycling of spent adsorbents for oxyanions and heavy metal ions in the production of ceramics.

    PubMed

    Verbinnen, Bram; Block, Chantal; Van Caneghem, Jo; Vandecasteele, Carlo

    2015-11-01

    Spent adsorbents for oxyanion forming elements and heavy metals are classified as hazardous materials and they are typically treated by stabilization/solidification before landfilling. The use of lime or cement for stabilization/solidification entails a high environmental impact and landfilling costs are high. This paper shows that mixing spent adsorbents in the raw material for the production of ceramic materials is a valuable alternative to stabilize oxyanion forming elements and heavy metals. The produced ceramics can be used as construction material, avoiding the high economic and environmental impact of stabilization/solidification followed by landfilling. To study the stabilization of oxyanion forming elements and heavy metals during the production process, two series of experiments were performed. In the first series of experiments, the main pollutant, Mo was adsorbed onto iron-based adsorbents, which were then mixed with industrial sludge (3 w/w%) and heated at 1100°C for 30 min. Mo was chosen, as this element is easily adsorbed onto iron-based adsorbents and it is the element that is the most difficult to stabilize (i.e. the highest temperatures need to be reached before the concentrations in the leachate are reduced). Leaching concentration from the 97/3 sludge/adsorbent mixture before heating ranged between 85 and 154 mg/kg; after the heating process they were reduced to 0.42-1.48 mg/kg. Mo was actually stabilized, as the total Mo concentration after addition was not affected by the heat treatment. In the second series of experiments, the sludge was spiked with other heavy metals and oxyanion forming elements (Cr, Ni, Cu, Zn, As, Cd and Pb) in concentrations 5 times higher than the initial concentrations; after heat treatment the leachate concentrations were below the regulatory limit values. The incorporation of spent adsorbents in ceramic materials is a valuable and sustainable alternative to the existing treatment methods, saving raw materials in the

  14. Recycling.

    ERIC Educational Resources Information Center

    Sinker, Barbara

    1986-01-01

    Discusses the range of benefits resulting from recycling efforts and projects. Presents information and data related to the recycling of metals, cans, paper, fans, and plastics. Suggestions for motivating and involving youth in recycling programs are also offered. (ML)

  15. Recycle

    SciTech Connect

    1988-10-01

    ;Contents: The Problem; What`s In Our Trash; Where Does Trash Go; Where Does Our Trash Go; The Solution; What Is Recycling; Why Should We Recycle; A National Goal of 25%; What Can We Recycle; What Do We Do With Our Recyclables.

  16. Recycling of Organic Waste Sludge by Hydrothermal Dry Steam Aiming for Adsorbent

    NASA Astrophysics Data System (ADS)

    Hoshikawa, Hisahiro; Hayakawa, Tomoki; Yamasaki, Nakamichi

    2006-05-01

    Global warming becomes more serious problem today. We have to develop new technology for new energy or fixation of carbon dioxide. Biomass is considered to be one of new energies. Methane fermentation is a method to make methane from biomass, such as garbage and fecal of farm animals, by methane fermentation bacteria. It has a problem, however, that bacteria are deactivated due to ammonia, which is made by itself. And much methane fermentation residue is incinerated. Therefore recycling methane fermentation residue is important for effective use of biomass. We research hydrothermal process. Dry steam means unsaturated vapor, we call. It demands a temperature less than 400 °C. And it is expected to accelerate dehydration effect, decompose and extract the organic matter, and make porous material. Thus, we try to apply the dry steam to recycling of organic waste sludge aiming for absorbent. Experiments were conducted at 250-350 °C in nitrogen atmosphere. The carbon products are analyzed by CHNS elemental analysis, and Thermogravimetry. The extractives are analyzed by gas chromatograph.

  17. Utilization of rice husk ash as novel adsorbent: a judicious recycling of the colloidal agricultural waste.

    PubMed

    Foo, K Y; Hameed, B H

    2009-11-30

    Concern about environmental protection has aroused over the years from a global viewpoint. To date, the ever-increasing importance of biomass as the energy and material resources has lately been accounted by the rising prices for the crude petroleum oil. Rice husk ash, the most appropriate representative of the high ash biomass waste, is currently obtaining sufficient attraction, owning to its wide usefulness and potentiality in environmental conservation. Confirming the assertion, this paper presents a state of the art review of the rice milling industry, its background studies, fundamental properties and industrial applications. Moreover, the key advance on the preparation of novel adsorbents, its major challenges together with the future expectation has been highlighted and discussed. Conclusively, the expanding of rice husk ash in the field of adsorption science represents a viable and powerful tool, leading to the superior improvement of pollution control and environmental preservation. PMID:19836724

  18. Woody biomass production in waste recycling systems

    SciTech Connect

    Rockwood, D.L.; Snyder, G.H.; Sprinkle, R.R.

    1994-12-31

    Combining woody biomass production with waste recycling offers many mutual advantages, including increased tree growth and nutrient and water reclamation. Three biomass/recycling studies collectively involving Eucalyptus amplifolia, E. camaldulensis, and E. grandis, rapidly growing species potentially tolerant of high water and nutrient levels, are (1) evaluating general potential for water/nutrient recycling systems to enhance woody biomass production and to recycle water and nutrients, (2) documenting Eucalyptus growth, water use, and nutrient uptake patterns, and (3) identifying Eucalyptus superior for water and nutrient uptake in central and southern Florida. In a 1992-93 study assessing the three Eucalyptus species planted on the outside berms of sewage effluent holding ponds, position on the berms (top to bottom) and genotypes influenced tree size. The potential of the trees to reduce effluent levels in the ponds was assessed. In a stormwater holding pond planted in 1993, these Eucalyptus genotypes varied significantly for tree size but not for survival. E. camaldulensis appears generally superior when flooded with industrial stormwater. Potential sizes of ponds needed for different stormwater applications were estimated. Prolonged flooding of 4- and 5-year-old E. camaldulensis with agricultural irrigation runoff has had no observable effects on tree growth or survival. Younger E. camaldulensis, E. amplifolia, and E. grandis were assessed for water use and nutrient uptake during a Summer 1994 flooding.

  19. Water recycling system using thermopervaporation method

    NASA Technical Reports Server (NTRS)

    Nitta, K.; Ashida, A.; Mitani, K.; Ebara, K.; Yamada, A.

    1986-01-01

    A water recycling system concept for the crew of the space station is presented. A thermopervaporation method is a new key technology used for the distillation process, utilizing a hydrophobic membrane. An experimental study of thermopervaporation revealed that the permeation depends on the gap between the membrane and the cooling surface in the condensation room: the steam diffusion occurs with gaps less than 5 mm while natural convection becomes dominant with gaps more than 5 mm. A brief discussion of the system operation is also described.

  20. Dynamics and control of recycle systems. 4. Ternary systems with one or two recycle streams

    SciTech Connect

    Tyreus, B.D. ); Luyben, W.L. . Department of Chemical Engineering)

    1993-06-01

    This paper is the fourth in a series of papers that explore the challenging problems associated with the dynamics and control of recycle systems. The reactions considered in previous papers were fairly simple. Only first-order reactions were considered, so there was only one fresh feed stream. In this paper, second-order kinetics are considered with two fresh-feed makeup streams. Two cases are considered: (1) instantaneous and complete one-pass conversion of one of the two components in the reactor so there is an excess of only one component that must be recycled and (2) incomplete conversion per pass so there are two recycle streams. It is shown that the generic liquid-recycle rule proposed by Luyben applies in both of these cases: snowballing is prevented by fixing the flow rate somewhere in the recycle system. An additional generic rule is proposed: fresh feed makeup of any component cannot be fixed unless the component undergoes complete single-pass conversion. In the complete one-pass conversion case, throughput can be set by fixing the flow rate of the limiting reactant. The makeup of the other reactant should be set by level control in the reflux drum of the distillation column. In the incomplete conversion case, two workable schemes were found: (1) Both recycle flow rates are fixed and both fresh-feed makeups are brought in on level control. Throughput is controlled by changing either the reactor temperature or the recycle flow rates. (2) One fresh-feed makeup controls reactor level and the other controls the composition in the reactor. Throughput is controlled by setting reactor temperature or reactor effluent flow rate.

  1. Surface Adsorbate Fluctuations and Noise in Nanoelectromechanical Systems

    PubMed Central

    Yang, Y. T.; Callegari, C.; Feng, X. L.; Roukes, M. L.

    2013-01-01

    Physisorption on solid surfaces is important in both fundamental studies and technology. Adsorbates can also be critical for the performance of miniature electromechanical resonators and sensors. Advances in resonant nanoelectromechanical systems (NEMS), particularly mass sensitivity attaining the single-molecule level, make it possible to probe surface physics in a new regime, where a small number of adatoms cause a detectable frequency shift in a high quality factor (Q) NEMS resonator, and adsorbate fluctuations result in resonance frequency noise. Here we report measurements and analysis of the kinetics and fluctuations of physisorbed xenon (Xe) atoms on a high-Q NEMS resonator vibrating at 190.5 MHz. The measured adsorption spectrum and frequency noise, combined with analytic modeling of surface diffusion and adsorption–desorption processes, suggest that diffusion dominates the observed excess noise. This study also reveals new power laws of frequency noise induced by diffusion, which could be important in other low-dimensional nanoscale systems. PMID:21388120

  2. Precipitation Recycling in the NASA GEOS Data Assimilation System

    NASA Technical Reports Server (NTRS)

    Bosilovich, Michael G.; Schubert, Siegfried; Molod, Andrea; Takacs, Lawrence L.

    1999-01-01

    Analysis of precipitation recycling can improve the understanding of regional hydrologic anomalies, especially their evolution and maintenance. Diagnostic models of the recycling of precipitation and are applied to 15 years of the NASA Goddard Earth Observing System (GEOS) Data Assimilation System (DAS). Recycled precipitation is defined as the fraction of precipitation within a given region that originated as surface evaporation from the same region. The focus of the present work is on the interannual variability of the central United States hydrologic cycle and precipitation recycling. The extreme years of 1988 (drought) and 1993 (flood) are compared with the 15 year base period mean annual cycle. The results indicate that recycling ratio (the amount of precipitation with a local source relative to the total precipitation) is greater in 1988 than both the base period mean and the 1993 season (with 1993 recycling ratio less than the mean). On the other hand, both the summers of 1988 and 1993 show less total recycled precipitation than the mean. The results also show that precipitation recycling may have been more important in the spring of 1993, when the region was primed for flooding, than the summer, when the sever flooding occurred. The diagnostic approaches to precipitation recycling suffer from some weaknesses. Numerical simulations and assimilation using passive tracers have the potential to provide more accurate calculations of precipitation recycling and the remote sources of water. This ability is being incorporated into the latest GEOS data assimilation system, and some preliminary results will be presented.

  3. Utilization of membranes for H2O recycle system

    NASA Technical Reports Server (NTRS)

    Ohya, H.; Oguchi, M.

    1986-01-01

    Conceptual studies of closed ecological life support systems (CELSS) carried out at NAL in Japan for a water recycle system using membranes are reviewed. The system will treat water from shower room, urine, impure condensation from gas recycle system, and so on. The H2O recycle system is composed of prefilter, ultrafiltration membrane, reverse osmosis membrane, and distillator. Some results are shown for a bullet train of toilet-flushing water recycle equipment with an ultraviltration membrane module. The constant value of the permeation rate with a 4.7 square meters of module is about 70 1/h after 500th of operation. Thermovaporization with porous polytetrafluorocarbon membrane is also proposed to replce the distillator.

  4. Systems for recycling water in poultry processing

    SciTech Connect

    Carawan, R.E.; Sheldon, B.W.

    1988-12-31

    The study was conducted to identify effective and economical water treatments, including disinfection, to meet the U.S. Department of Agriculture`s standards for the recycling of poultry chiller water. Reconditioned chiller water meeting these criteria was used to chill hot broiler carcasses, and the quality of the chilled carcasses was then evaluated.

  5. Challenges in legislation, recycling system and technical system of waste electrical and electronic equipment in China.

    PubMed

    Zhang, Shengen; Ding, Yunji; Liu, Bo; Pan, De'an; Chang, Chein-chi; Volinsky, Alex A

    2015-11-01

    Waste electrical and electronic equipment (WEEE) has been one of the fastest growing waste streams worldwide. Effective and efficient management and treatment of WEEE has become a global problem. As one of the world's largest electronic products manufacturing and consumption countries, China plays a key role in the material life cycle of electrical and electronic equipment. Over the past 20 years, China has made a great effort to improve WEEE recycling. Centered on the legal, recycling and technical systems, this paper reviews the progresses of WEEE recycling in China. An integrated recycling system is proposed to realize WEEE high recycling rate for future WEEE recycling.

  6. Cryogenic adsorber design in a helium refrigeration system

    NASA Astrophysics Data System (ADS)

    Hu, Zhongjun; Zhang, Ning; Li, Zhengyu; Li, Q.

    2012-06-01

    The cryogenic adsorber is specially designed to eliminate impurities in gaseous helium such as O2, and N2 which is normally difficult to remove, based on the reversible cryotrapping of impurities on an activated carbon bed. The coconut shell activated carbon is adopted because of its developed micropore structure and specific surface area. This activated carbon adsorption is mostly determined by the micropore structure, and the adsorption rate of impurities is inversely proportional to the square of the particle sizes. The active carbon absorber's maximum permissible flow velocity is 0.25 m/s. When the gas flow velocity increases, the adsorption diffusion rate of the adsorbent is reduced, because an increase in the magnitude of the velocity resulted in a reduced amount of heat transfer to a unit volume of impure gas. According to the numerical simulation of N2 adsorption dynamics, the appropriate void tower link speed and the saturated adsorption capacity are determined. Then the diameter and height of the adsorber are designed. The mass transfer length should be taken into account in the adsorber height design. The pressure decrease is also calculated. The important factors that influence the adsorber pressure decrease are the void tower speed, the adsorbed layer height, and the active carbon particle shape and size.

  7. Ferrite insertion at Recycler Flying Wire System

    SciTech Connect

    K.Y. Ng

    2004-02-27

    Ferrite rods are installed inside the flying-wire cavity of the Recycler Ring and at entrance and exit beam pipes in order to absorb high-frequency electromagnetic waves excited by the beam. However, these rods may also deteriorate the vacuum pressure of the ring. An investigation is made to analyze the necessity of the ferrite rods at the entrance and exit beam pipes.

  8. Oxygen Photochemistry on TiO2(110): Recyclable, Photoactive Oxygen Produced by Annealing Adsorbed O2

    SciTech Connect

    Petrik, Nikolay G.; Kimmel, Gregory A.

    2011-11-03

    Photon-stimulated reactions between chemisorbed and physisorbed oxygen on TiO2(110) are investigated. Experiments using O2 isotopologues show that UV irradiation results in the exchange of atoms between chemisorbed and physisorbed oxygen. Annealing chemisorbed oxygen to {approx}350 K maximizes these exchange reactions, while dissociatively adsorbing oxygen on TiO2(110) at 300 - 350 K does not lead to reactions with physisorbed O2. After annealing to 350 K, the exchange products photodesorb in the plane perpendicular to the bridge-bonded oxygen rows at an angle of 45{sup o}. In contrast, the chemisorbed O2 photodesorbs normal to the surface. Remarkably, the chemisorbed species is stable under multiple cycles of UV irradiation with physisorbed O2. The active atoms in the chemisorbed species can be changed from 18O to 16O and then back to 18O via the exchange reactions. The results show that annealing oxygen adsorbed on TiO2(110) to {approx}350 K produces a stable chemical species with interesting photochemical properties. Possible forms for the photoactive species include O2 adsorbed in a bridging oxygen vacancy or tetraoxygen.

  9. Recycling, Inc.

    ERIC Educational Resources Information Center

    Martin, Amy

    1992-01-01

    Suggestions for creating a successful office recycling system are enumerated from start up plans to waste reduction and paper recycling. Contact information for recycling equipment, potential buyers of recycled materials, recycled products for purchase, and ideas for promotion and education of staff are included. (MCO)

  10. Early molecular adsorbents recirculating system treatment of Amanita mushroom poisoning.

    PubMed

    Kantola, Taru; Kantola, Teemu; Koivusalo, Anna-Maria; Höckerstedt, Krister; Isoniemi, Helena

    2009-10-01

    Acute poisoning due to ingestion of hepatotoxic Amanita sp. mushrooms can result in a spectrum of symptoms, from mild gastrointestinal discomfort to life-threatening acute liver failure. With conventional treatment, Amanita phalloides mushroom poisoning carries a substantial risk of mortality and many patients require liver transplantation. The molecular adsorbent recirculating system (MARS) is an artificial liver support system that can partly compensate for the detoxifying function of the liver by removing albumin-bound and water-soluble toxins from blood. This treatment has been used in acute liver failure to enable native liver recovery and as a bridging treatment to liver transplantation. The aim of the study is to evaluate the outcome of 10 patients with Amanita mushroom poisoning who were treated with MARS. The study was a retrospectively analyzed case series. Ten adult patients with accidental Amanita poisoning of varying severity were treated in a liver disease specialized intensive care unit from 2001 to 2007. All patients received MARS treatment and standard medical therapy for mushroom poisoning. The demographic, laboratory, and clinical data from each patient were recorded upon admission. The one-year survival and need for liver transplantation were documented. The median times from mushroom ingestion to first-aid at a local hospital and to MARS treatment were 18 h (range 14-36 h) and 48 h (range 26-78 h), respectively. All 10 patients survived longer than one year. One patient underwent a successful liver transplantation. No serious adverse side-effects were observed with the MARS treatment. In conclusion, MARS treatment seems to offer a safe and effective treatment option in Amanita mushroom poisoning.

  11. Greywater recycling systems in Germany--results, experiences and guidelines.

    PubMed

    Nolde, E

    2005-01-01

    Although Germany is not considered a water-poor country, there exist regional differences in water supply and consumption. During the past 15 years, the greywater aspect has been dealt with in Germany with a greater interest and variable success. In addition to an increased environmental awareness, water costs also play an important role in increasing the demand for advanced greywater treatment plants nstalled in buildings. Under favourable conditions, the amortisation costs usually lie between 5 and 7 years. Systems that have been extensively tried and tested and have been shown to be most reliable are those employing an advanced biological treatment followed by an UV disinfection. Systems based on membrane technology are being developed and researched intensively in Germany for municipal wastewater treatment. However, so far they play no role in greywater recycling. Greywater systems operating under low energy and maintenance requirements without the use of chemicals are mostly favoured. In Germany, greywater recycling systems should be registered at the Health Office in order to guarantee that no cross-connections exist with the drinking water network and that pipes are labelled according to regulations. The hygienic requirements for recycled greywater, which is primarily used for toilet flushing, are oriented towards the EU-Guidelines for Bathing Waters. The use of recycled greywater for irrigation purposes is minor. As to the use of recycled water for laundry, the first promising investigation results are now available.

  12. Utilization of recycled charcoal as a thermal source and adsorbent for the treatment of PCDD/Fs contaminated sediment.

    PubMed

    Zhao, Long; Hou, Hong; Iwasaki, Kanae; Terada, Akihiko; Hosomi, Masaaki

    2012-07-30

    A novel heat treatment process in which charcoal was used as both a thermal source and an adsorbent was investigated as a low-cost method for removal of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) from solids. Three laboratory scale experiments involving various ratios of charcoal to contaminated sediment and air superficial velocities were performed. The results indicated that the total and toxic equivalency quantities (TEQ) concentrations of PCDD/Fs decreased significantly in the treated sediment of all runs with removal efficiencies greater than 96% and 90%, which resulted in residual concentrations below the Japanese standard limit of 0.15ng-TEQg(-1). The charcoal/contaminated sediment ratio and air superficial velocity were determinant factors controlling the PCDD/Fs concentrations and homologue profiles in effluent. As the air superficial velocity increased and charcoal/contaminated sediment ratio decreased, more PCDD/Fs were released from the sediment as fly ash, making them less likely to remain in the treated sediment. These phenomena were likely a result of the vapor pressure of PCDD/Fs, contact time with effluent gas and amount of PCDD/Fs adsorbed by charcoal. The developed process would promise an alternative to a conventional remediation process for PCDD/Fs contaminated solids.

  13. Utilization of recycled charcoal as a thermal source and adsorbent for the treatment of PCDD/Fs contaminated sediment.

    PubMed

    Zhao, Long; Hou, Hong; Iwasaki, Kanae; Terada, Akihiko; Hosomi, Masaaki

    2012-07-30

    A novel heat treatment process in which charcoal was used as both a thermal source and an adsorbent was investigated as a low-cost method for removal of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) from solids. Three laboratory scale experiments involving various ratios of charcoal to contaminated sediment and air superficial velocities were performed. The results indicated that the total and toxic equivalency quantities (TEQ) concentrations of PCDD/Fs decreased significantly in the treated sediment of all runs with removal efficiencies greater than 96% and 90%, which resulted in residual concentrations below the Japanese standard limit of 0.15ng-TEQg(-1). The charcoal/contaminated sediment ratio and air superficial velocity were determinant factors controlling the PCDD/Fs concentrations and homologue profiles in effluent. As the air superficial velocity increased and charcoal/contaminated sediment ratio decreased, more PCDD/Fs were released from the sediment as fly ash, making them less likely to remain in the treated sediment. These phenomena were likely a result of the vapor pressure of PCDD/Fs, contact time with effluent gas and amount of PCDD/Fs adsorbed by charcoal. The developed process would promise an alternative to a conventional remediation process for PCDD/Fs contaminated solids. PMID:22633545

  14. Carbon recycling in materially closed ecological life support systems.

    PubMed

    Obenhuber, D C; Folsome, C E

    1988-01-01

    Materially closed microbial ecosystems represent model life support systems for the future human habitation of space. These ecosystems when subjected to a constant energy flux seem to be reliable and self-sufficient systems for recycling of biologically produced carbon compounds.

  15. The collection system for residential recyclables in communities in Haidian District, Beijing: a possible approach for China recycling.

    PubMed

    Wang, Jia; Han, Ling; Li, Shushu

    2008-01-01

    Recycling and reusing recyclables is an important way to solve the municipal solid waste (MSW) problem. As the collection of solid waste takes up the largest percentage of MSW management budgets, improving the collection of recyclables is important. Since the decline of government-run waste buying depots in the late 1980s, the collection of recyclables from households and waste deposit sites in China is done by buyers with small informal bases and waste pickers, who are usually unskilled rural people who have come to the cities. Because of this, the current system is seen to have social problems. So, the recyclable collection system has both social as well as economic significance. China is in the process of rapid industrialization and urbanization, and a new mode of community collection system is emerging. It operates by market mechanisms, with waste collection companies that are supported by the municipal government, establishing recycle service sites, and employing workers to buy recyclables door-to-door. This paper is a case study of the new system in the Haidian District, Beijing. It summarizes the system, compares it to experiences in other countries and discusses whether the new approach contributes to resources recycling in China. PMID:17967528

  16. Interface problems between material recycling systems and plants.

    PubMed

    Nitta, K; Oguchi, M; Otsubo, K

    1992-01-01

    A most important problem to creating a CELSS system to be used in space, for example, for a Lunar Base or Manned Mars mission, seems to be how to design and operate the various material recycling systems to be used on the missions. Recent studies of a Lunar Base habitat have identified examples of CELSS configurations to be used for the Plant Cultivation Module. Material recycling subsystems to be installed in the Plant Cultivation Modules are proposed to consist of various sub-systems, such as dehumidifiers, oxygen separation systems, catalytic wet oxidation systems, nitrogen adjusting systems, including tanks, and so on. The required performances of such various material recycling subsystems are determined based on precise metabolic data of derived from the various species of plants to be selected and investigated. The plant metabolic data, except that for wheat and potato, has not been fully collected at the present time. Therefore, much additional plant cultivation data is required to determine the performances of each material recycling subsystem introduced in Plant Cultivation Modules. PMID:11537056

  17. Dynamic Systems Analysis Report for Nuclear Fuel Recycle

    SciTech Connect

    Brent Dixon; Sonny Kim; David Shropshire; Steven Piet; Gretchen Matthern; Bill Halsey

    2008-12-01

    This report examines the time-dependent dynamics of transitioning from the current United States (U.S.) nuclear fuel cycle where used nuclear fuel is disposed in a repository to a closed fuel cycle where the used fuel is recycled and only fission products and waste are disposed. The report is intended to help inform policy developers, decision makers, and program managers of system-level options and constraints as they guide the formulation and implementation of advanced fuel cycle development and demonstration efforts and move toward deployment of nuclear fuel recycling infrastructure.

  18. Energy, greenhouse gas, and cost reductions for municipal recycling systems.

    PubMed

    Chester, Mikhail; Martin, Elliot; Sathaye, Nakul

    2008-03-15

    Curbside recycling programs can be more cost-effective than landfilling and lead to environmental benefits from the recovery of materials. Significant reductions in energy and emissions are derived from the decrease of energy-intensive production with virgin materials. In many cities, competing priorities can lead to limited consideration given to system optimal collection and processing strategies that can drive down costs and increase revenue while simultaneously reducing system energy consumption and greenhouse gas (GHG) emissions. We evaluate three alterations to a hypothetical California city's recycling network to discern the conditions under which the changes.constitute system improvements to cost, energy, and emissions. The system initially operates with a collection zoning scheme that does not mitigate the impact of seasonal variations in consumer tonnage. In addition, two collection organizations operate redundantly, collecting recyclables from different customer types on the same street network. Finally, the system is dual stream, meaning recyclables are separated at the curbside. In some scenarios, this practice can limit the consumer participation rate leading to lower collection quantities. First, we evaluate a "business as usual" (BAU) scenario and find that the system operates at a $1.7 M/yr loss but still avoids a net 18.7 GJ and 1700 kg of greenhouse gas equivalent (GGE) per ton of material recycled. Second, we apply an alternative zoning scheme for collection that creates a uniform daily pickup demand throughout the year reducing costs by $0.2 M/yr, energy by 30 MJ/ton, and GHG emissions by 2 kg GGE/ton. Next, the two collection organizations are consolidated into a single entity further reducing vehicle fleet size and weekly vehicle miles traveled resulting in savings from BAU of $0.3 M/yr, 100 MJ/ton, and 8 kg GGE/ton. Lastly, we evaluate a switch to a single-stream system (where recyclables are commingled). We showthat single-stream recycling

  19. Removal of sulfamethazine by hypercrosslinked adsorbents in aquatic systems.

    PubMed

    Grimmett, Maria E

    2013-01-01

    Four hundred tons of sulfamethazine are fed to livestock annually in North America to prevent disease and promote growth, but most of the drug is excreted unmetabolized into the environment. Because of slow degradation and high mobility, sulfamethazine contaminates groundwater supplies and causes aquatic ecosystem damage. Current water treatment methods to remove pharmaceuticals are not universally effective and have considerable limitations, which necessitate newer remediation techniques. Hypercrosslinked adsorbents, polystyrene polymers 100% crosslinked with methylene bridges, show promise because of high surface areas, high mechanical strength, and regenerable properties. This study screened four Purolite hypercrosslinked adsorbents (MN152, MN250, PAD400, and PAD600) to remove sulfamethazine from contaminated water and then characterized the most efficient resin, MN250, with batch adsorption and desorption experiments to optimize its use. Sulfamethazine adsorption onto MN250 displayed an L-class isotherm shape consistent with monolayer adsorption, negligible solute-solute interactions at the adsorbent surface, and decreasing activation energies of desorption with increasing surface coverage. MN250 had a maximum experimental adsorption capacity of 111 mg g, showing high correlation to the Langmuir and Freundlich models. Adsorption kinetics revealed prolonged adsorption over 59 h and were best described by Ho's pseudo-second-order model. There was minimal desorption from MN250 in distilled water, indicating an irreversible adsorption process. MN250's high capacity for sulfamethazine adsorption, minimal desorption in water, and ability to be regenerated make it a practical solution for sulfamethazine removal in areas that have contaminated groundwater supplies (e.g., areas near concentrated livestock operations), especially as current treatment methods have significant drawbacks.

  20. Symbiotically integrated organic recycling/renewable energy systems

    SciTech Connect

    Hamburg, R.A.

    1983-06-01

    Two operating systems designed for the integrated recycling of organic materials and production of renewable energy are described. Both systems include the Chinese design, water-pressure biogas digesters, a solar greenhouse and algae/aquatic plant ponds, all in passive symbiotic relationships with a minimum of high technology sophistication. A discussion of fish ponds and fuel alcohol production is also included since they offer many possibilities for expanded integration.

  1. Ammonia recycling enables sustainable operation of bioelectrochemical systems.

    PubMed

    Cheng, Ka Yu; Kaksonen, Anna H; Cord-Ruwisch, Ralf

    2013-09-01

    Ammonium (NH4(+)) migration across a cation exchange membrane is commonly observed during the operation of bioelectrochemical systems (BES). This often leads to anolyte acidification (pH <5.5) and complete inactivation of biofilm electroactivity. Without using conventional pH controls (dosage of alkali or pH buffers), the present study revealed that anodic biofilm activity (current) could be sustained if recycling of ammonia (NH3) was implemented. A simple gas-exchange apparatus was designed to enable continuous recycling of NH3 (released from the catholyte at pH >10) from the cathodic headspace to the acidified anolyte. Results indicated that current (110 mA or 688 Am(-3) net anodic chamber volume) was sustained as long as the NH3 recycling path was enabled, facilitating continuous anolyte neutralization with the recycled NH3. Since the microbial current enabled NH4(+) migration against a strong concentration gradient (~10-fold), a novel way of ammonia recovery from wastewaters could be envisaged.

  2. Small scale water recycling systems--risk assessment and modelling.

    PubMed

    Diaper, C; Dixon, A; Bulier, D; Fewkes, A; Parsons, S A; Strathern, M; Stephenson, T; Strutt, J

    2001-01-01

    This paper aims to use quantitative risk analysis, risk modelling and simulation modelling tools to assess the performance of a proprietary single house grey water recycling system. A preliminary Hazard and Operability study (HAZOP) identified the main hazards, both health related and economic, associated with installing the recycling system in a domestic environment. The health related consequences of system failure were associated with the presence of increased concentrations of micro-organisms at the point of use, due to failure of the disinfection system and/or the pump. The risk model was used to assess the increase in the probability of infection for a particular genus of micro-organism, Salmonella spp, during disinfection failure. The increase in the number of cases of infection above a base rate rose from 0.001% during normal operation, to 4% for a recycling system with no disinfection. The simulation model was used to examine the possible effects of pump failure. The model indicated that the anaerobic COD release rate in the system storage tank increases over time and dissolved oxygen decreases during this failure mode. These conditions are likely to result in odour problems.

  3. Adsorption of high salinity surfactant systems and sacrificial agents for EOR on model adsorbents

    SciTech Connect

    Volz, H.V.

    1988-05-01

    In chemical flooding processes for enhanced oil recovery, chemical adsorption is a major factor which may limit the applicability of these processes. Under typical high salinity conditions of West German oil reservoirs (100 to 200 kg/m/sup 3/ of total dissolved solids) adsorption experiments with single and multi-component surfactant systems and with and without the use of sacrificial agents on model adsorbents were carried out, adsorbents being calcium benetonite, illite, kaolinite, dickite, prochlorite, and quartz. It can be shown that polyethylene glycols of appropriate molecular weight, which were used as sacrificial agents, adsorb specifically on calcium bentonite or quartz, whereas on kaolnite they form an adsorbing complex together with the surfactant. Based on experimental results specific coverages of sacrificial agents and surfactants are calculated.

  4. Choosing among alternative recycling systems: An economic analysis

    SciTech Connect

    Stedge, G.D. . Dept. of Agricultural and Applied Economics); Halstead, J.M. . Dept. of Resource Economics and Development)

    1994-03-01

    Due to the increasing concern over the disposal of municipal solid waste, municipalities have begun searching for ways to recycle a larger percentage to their waste stream at a reasonable cost. This report examines bag-based recycling. This system, due to its efficient collection and separation method, and its convenience, should be able to capture a larger share of the waste stream at a lower cost per metric ton than conventional recycling programs. Using a case study approach, a bag-based program is compared with a curbside-sort program and a drop-off program. Using time/motion analysis, a garbage composition study, a household survey, and the recording of set-out rates of a sample of dwelling units, the efficiency of the three programs was defined and estimated. The efficiency of the bag-based system was also estimated for three areas with distinct household densities. Although the curbside-sort program was found to divert a larger percentage of the residential waste stream than the bag-based system, the cost per metric ton of the bag-based system is so much lower that it clearly is the most efficient of the three programs. The drop-off program had a very low cost per metric ton; however, if failed to divert the minimum acceptable level of the waste stream. The bag-based system proved to be more efficient in areas with higher household densities.

  5. Study on CO2 global recycling system.

    PubMed

    Takeuchi, M; Sakamoto, Y; Niwa, S

    2001-09-28

    In order to assist in finding ways to mitigate CO2 emission and to slow the depletion of fossil fuels we have established and evaluated a representative system, which consists of three technologies developed in our laboratory. These technologies were in CO2 recovery, hydrogen production and methanol synthesis and in addition we established the necessary supporting systems. Analysis of outline designs of the large scale renewable energy power generation system and this system and energy input for building plant, energy input for running plant has been conducted based on a case using this system for a 1000-MW coal fired power plant, followed by an evaluation of the material balance and energy balance. The results are as follows. Energy efficiency is 34%, the CO2 reduction rate is 41%, the balance ratio of the energy and CO2 of the system is 2.2 and 1.8, respectively, on the assumption that the primary renewable energy is solar thermal power generation, the stationary CO2 emission source is a coal-fired power plant and the generation efficiency of the methanol power plant is 60%. By adopting the system, 3.7 million tons of CO2 can be recovered, approximately 2.7 million tons of methanol can be produced, and 15.4 billion kWh of electricity can be generated per year. Compared to generating all electrical power using only coal, approximately 2.6 million tons of coal per year can be saved and approximately 2.15 million tons of CO2 emission can be reduced. Therefore, it is clearly revealed that this system would be effective to reduce CO2 emissions and to utilize renewable energy.

  6. System and method for recycling used oil filters

    SciTech Connect

    McCarty, M.W.; Taylor, J.M.; Baillie, L.A.

    1993-08-17

    A system is described for recycling oil filters comprising: (a) means for shredding used oil filters, said filters comprising ferrous metal parts and nonmetal parts, and containing trapped oil, into smaller metal parts and nonmetal parts, and for releasing at least a portion of the trapped oil; (b) means for separating the released oil from the metal parts and nonmetal parts; (c) means for separating the metal parts from the nonmetal parts without incineration using gravitational and magnetic means; (d) means for draining oil from the separated metal parts and nonmetal parts; (e) means for separately recovering the oil, the metal parts, and the nonmetal parts; and (f) means for compacting the separated nonmetal parts. A method is also described for recycling used oil filters using this system.

  7. Palladium Nanoparticle-Loaded Cellulose Paper: A Highly Efficient, Robust, and Recyclable Self-Assembled Composite Catalytic System.

    PubMed

    Zheng, Guangchao; Kaefer, Katharina; Mourdikoudis, Stefanos; Polavarapu, Lakshminarayana; Vaz, Belén; Cartmell, Samantha E; Bouleghlimat, Azzedine; Buurma, Niklaas J; Yate, Luis; de Lera, Ángel R; Liz-Marzán, Luis M; Pastoriza-Santos, Isabel; Pérez-Juste, Jorge

    2015-01-15

    We present a novel strategy based on the immobilization of palladium nanoparticles (Pd NPs) on filter paper for development of a catalytic system with high efficiency and recyclability. Oleylamine-capped Pd nanoparticles, dispersed in an organic solvent, strongly adsorb on cellulose filter paper, which shows a great ability to wick fluids due to its microfiber structure. Strong van der Waals forces and hydrophobic interactions between the particles and the substrate lead to nanoparticle immobilization, with no desorption upon further immersion in any solvent. The prepared Pd NP-loaded paper substrates were tested for several model reactions such as the oxidative homocoupling of arylboronic acids, the Suzuki cross-coupling reaction, and nitro-to-amine reduction, and they display efficient catalytic activity and excellent recyclability and reusability. This approach of using NP-loaded paper substrates as reusable catalysts is expected to open doors for new types of catalytic support for practical applications. PMID:26263455

  8. EVALUATION OF THE MIDDAS SYSTEM FOR DESIGNING GAC ADSORBERS

    EPA Science Inventory

    The Micro-Diameter-Depth Adsorption System (MIDDAS) was evaluated for its usefulness in determining equilibrium parameters for adsorption in granular activated carbon (GAC) systems. The system employs a column configuration for determining such parameters, rather than the traditi...

  9. Carbon recycling in materially closed ecological life support systems

    NASA Technical Reports Server (NTRS)

    Obenhuber, D. C.; Folsome, C. E.

    1988-01-01

    Results of studies are presented of materially closed energetically open microbial ecosystems or 'closed ecosystems'. These are natural marine ecosystems that have been sealed in glass containers to prevent material exchange with the environment but allow energy to pass freely through them. They represent model life support systems for the future human habitation of space. The results are discussed analytically and indicate that these ecosystems, when subjected to a constant energy flux, seem to be reliable and self-sufficient systems for recycling of biologically produced carbon compounds.

  10. Gas and water recycling system for IOC vivarium experiments

    NASA Technical Reports Server (NTRS)

    Nitta, K.; Otsubo, K.

    1986-01-01

    Water and gas recycling units designed as one of the common experiment support system for the life science experiment facilities used in the Japanese Experiment Module are discussed. These units will save transportation and operation costs for the life science experiments in the space station. These units are also designed to have interfaces so simple that the connection to another life science experiment facilities such as the Research Animal Holding Facility developed by the Rockheed Missiles and Space Company can be easily done with small modification.

  11. CELSS experiment model and design concept of gas recycle system

    NASA Technical Reports Server (NTRS)

    Nitta, K.; Oguchi, M.; Kanda, S.

    1986-01-01

    In order to prolong the duration of manned missions around the Earth and to expand the human existing region from the Earth to other planets such as a Lunar Base or a manned Mars flight mission, the controlled ecological life support system (CELSS) becomes an essential factor of the future technology to be developed through utilization of space station. The preliminary system engineering and integration efforts regarding CELSS have been carried out by the Japanese CELSS concept study group for clarifying the feasibility of hardware development for Space station experiments and for getting the time phased mission sets after FY 1992. The results of these studies are briefly summarized and the design and utilization methods of a Gas Recycle System for CELSS experiments are discussed.

  12. Investigation of a ponding irrigation system to recycle agricultural wastewater.

    PubMed

    Chen, P H; Leung, K C; Wang, J T

    2000-08-01

    This article presents the results of natural carrying capacity of ponding irrigation system in Taoyuan agricultural zone, Taiwan. Both the systematic water quality and the ponding effects were examined. The ponding irrigation system included a flow channel and storage ponds. The data showed that most water characteristics deteriorated gradually from upper- to down-stream in the flow channel and the flow channel was not attributed to any self-purification in agricultural returning water practically. On the other hand, the results of storage ponds indicated that they can provide a natural treatment (i.e., the outlet water quality of the ponds is more desirable than that of the inlet). Consequently, the ponding irrigation system offers the natural self-purification in ponds to reuse and recycle the returning agricultural wastewater and to extend the irrigation capacity and efficiency.

  13. Non-equilibrium Transport in Carbon based Adsorbate Systems

    NASA Astrophysics Data System (ADS)

    Fürst, Joachim; Brandbyge, Mads; Stokbro, Kurt; Jauho, Antti-Pekka

    2007-03-01

    We have used the Atomistix Tool Kit(ATK) and TranSIESTA[1] packages to investigate adsorption of iron atoms on a graphene sheet. The technique of both codes is based on density functional theory using local basis sets[2], and non-equilibrium Green's functions (NEGF) to calculate the charge distribution under external bias. Spin dependent electronic structure calculations are performed for different iron coverages. These reveal adsorption site dependent charge transfer from iron to graphene leading to screening effects. Transport calculations show spin dependent scattering of the transmission which is analysed obtaining the transmission eigenchannels for each spin type. The phenomena of electromigration of iron in these systems at finite bias will be discussed, estimating the so-called wind force from the reflection[3]. [1] M. Brandbyge, J.-L. Mozos, P. Ordejon, J. Taylor, and K. Stokbro. Physical Review B (Condensed Matter and Materials Physics), 65(16):165401/11-7, 2002. [2] Jose M. Soler, Emilio Artacho, Julian D. Gale, Alberto Garcia, Javier Junquera, Pablo Ordejon, and Daniel Sanchez-Portal. Journal of Physics Condensed Matter, 14(11):2745-2779, 2002. [3] Sorbello. Theory of electromigration. Solid State Physics, 1997.

  14. Optimized design of recycle chromatography to isolate intermediate retained solutes in ternary mixtures: Langmuir isotherm systems.

    PubMed

    Lee, Ju Weon; Wankat, Phillip C

    2009-10-01

    Batch chromatography with a recycle stream is a popular and simple technique to separate a single target component in a complex mixture with moderate operating conditions. Design of recycle chromatography depends on the retention behaviors of the mixture components. In this work, four nucleosides were considered as solutes. Feed concentration and recycle methods were optimized to isolate only the intermediate retained solute in ternary and pseudo-ternary mixtures. Two recycle methods introduced in our previous work for linear isotherms, the desorbent and feed recycle methods, were compared in terms of productivity and desorbent to feed ratio, D/F, with various feed concentrations for competitive Langmuir isotherm systems. The simulation results show that the target (intermediate retained solute) was separated with over 99.76% purity and 99.88% yield. Productivity of the feed recycle method was increased by up to 162% and D/F was decreased by up to 59% compared to the desorbent recycle method. For the separation of nucleosides, recycle chromatography was compared to eight column simulated moving bed (SMB) cascades with a recycle stream and D/F of the SMB cascades was 58% lower than D/F of recycle chromatography at the same productivity. However, recycle chromatography is much simpler.

  15. Waste collection systems for recyclables: an environmental and economic assessment for the municipality of Aarhus (Denmark).

    PubMed

    Larsen, A W; Merrild, H; Møller, J; Christensen, T H

    2010-05-01

    Recycling of paper and glass from household waste is an integrated part of waste management in Denmark, however, increased recycling is a legislative target. The questions are: how much more can the recycling rate be increased through improvements of collection schemes when organisational and technical limitations are respected, and what will the environmental and economic consequences be? This was investigated in a case study of a municipal waste management system. Five scenarios with alternative collection systems for recyclables (paper, glass, metal and plastic packaging) were assessed by means of a life cycle assessment and an assessment of the municipality's costs. Kerbside collection would provide the highest recycling rate, 31% compared to 25% in the baseline scenario, but bring schemes with drop-off containers would also be a reasonable solution. Collection of recyclables at recycling centres was not recommendable because the recycling rate would decrease to 20%. In general, the results showed that enhancing recycling and avoiding incineration was recommendable because the environmental performance was improved in several impact categories. The municipal costs for collection and treatment of waste were reduced with increasing recycling, mainly because the high cost for incineration was avoided. However, solutions for mitigation of air pollution caused by increased collection and transport should be sought.

  16. Waste collection systems for recyclables: An environmental and economic assessment for the municipality of Aarhus (Denmark)

    SciTech Connect

    Larsen, A.W.; Merrild, H.; Moller, J.; Christensen, T.H.

    2010-05-15

    Recycling of paper and glass from household waste is an integrated part of waste management in Denmark, however, increased recycling is a legislative target. The questions are: how much more can the recycling rate be increased through improvements of collection schemes when organisational and technical limitations are respected, and what will the environmental and economic consequences be? This was investigated in a case study of a municipal waste management system. Five scenarios with alternative collection systems for recyclables (paper, glass, metal and plastic packaging) were assessed by means of a life cycle assessment and an assessment of the municipality's costs. Kerbside collection would provide the highest recycling rate, 31% compared to 25% in the baseline scenario, but bring schemes with drop-off containers would also be a reasonable solution. Collection of recyclables at recycling centres was not recommendable because the recycling rate would decrease to 20%. In general, the results showed that enhancing recycling and avoiding incineration was recommendable because the environmental performance was improved in several impact categories. The municipal costs for collection and treatment of waste were reduced with increasing recycling, mainly because the high cost for incineration was avoided. However, solutions for mitigation of air pollution caused by increased collection and transport should be sought.

  17. The consumption and recycling collection system of PET bottles: a case study of Beijing, China.

    PubMed

    Zhang, Hua; Wen, Zong-Guo

    2014-06-01

    After studying the recycling collection system of polyethylene terephthalate (PET) bottles worldwide, the authors conducted an intercept survey in Beijing. Two separate questionnaires were issued, one questionnaire to PET bottle consumers and one to PET bottle recyclers. In this study, consumers are defined as people that consume PET-bottled beverages in their daily life. Recyclers were defined as those involved in the collection and recycling of PET bottles. These include scavengers, itinerant waste buyers, small community waste-buying depots, medium/large redemption depots, and recycling companies. In total, 580 surveys were completed, including 461 by consumers and 119 by recyclers. The authors found that consumption of PET bottles in Beijing was nearly 100,000 tonnes in 2012. Age, occupation, gender, and education were identified as significant factors linked to PET-bottled beverage consumption, while income was not a significant factor. 90% Of post-consumed PET bottles were collected by informal collectors (i.e., scavengers and itinerant waste buyers). The survey also found that nearly all PET bottles were reprocessed by small factories that were not designed with pollution control equipment, which allows them to offer higher prices for waste recyclable bottles. As Beijing is trying to build a formal recycling collection system for recyclables, subsidies should be given to the formal recycling sector rather than being charged land use fees, and attention should also be given to informal recyclers that make their living from the collection of recyclables. Informal and formal sectors may work together by employing the scavengers and itinerant waste buyers for the formal sectors. In addition to the recycling of PET bottles, concern should also be allocated to reduce consumption, especially among young people, as they, compared to other groups, have a stronger demand for PET-bottled beverages and will be the main body of society.

  18. Response to waste electrical and electronic equipments in China: legislation, recycling system, and advanced integrated process.

    PubMed

    Zhou, Lei; Xu, Zhenming

    2012-05-01

    Over the past 30 years, China has been suffering from negative environmental impacts from distempered waste electrical and electronic equipments (WEEE) recycling activities. For the purpose of environmental protection and resource reusing, China made a great effort to improve WEEE recycling. This article reviews progresses of three major fields in the development of China's WEEE recycling industry: legal system, formal recycling system, and advanced integrated process. Related laws concerning electronic waste (e-waste) management and renewable resource recycling are analyzed from aspects of improvements and loopholes. The outcomes and challenges for existing formal recycling systems are also discussed. The advantage and deficiency related to advanced integrated recycling processes for typical e-wastes are evaluated respectively. Finally, in order to achieve high disposal rates of WEEE, high-quantify separation of different materials in WEEE and high added value final products produced by separated materials from WEEE, an idea of integrated WEEE recycling system is proposed to point future development of WEEE recycling industry.

  19. Recycling Frank: Spontaneous emergence of homochirality in noncatalytic systems

    PubMed Central

    Plasson, Raphaël; Bersini, Hugues; Commeyras, Auguste

    2004-01-01

    In this work, we introduce a prebiotically relevant protometabolic pattern corresponding to an engine of deracemization by using an external energy source. The spontaneous formation of a nonracemic mixture of chiral compounds can be observed in out-of-equilibrium systems via a symmetry-breaking phenomenon. This observation is possible thanks to chirally selective autocatalytic reactions (Frank's model) [Frank, F. C. (1953) Biochim. Biophys. Acta 11, 459–463]. We show that the use of a Frank-like model in a recycled system composed of reversible chemical reactions, rather than the classical irreversible system, allows for the emergence of a synergetic autoinduction from simple reactions, without any autocatalytic or even catalytic reaction. This model is described as a theoretical framework, based on the stereoselective reactivity of preexisting chiral monomeric building blocks (polymerization, epimerization, and depolymerization) maintained out of equilibrium by a continuous energy income, via an activation reaction. It permits the self-conversion of all monomeric subunits into a single chiral configuration. Real prebiotic systems of amino acid derivatives can be described on this basis. They are shown to be able to spontaneously reach a stable nonracemic state in a few centuries. In such systems, the presence of epimerization reactions is no more destructive, but in contrast is the central driving force of the unstabilization of the racemic state. PMID:15548617

  20. A double network gel as low cost and easy recycle adsorbent: Highly efficient removal of Cd(II) and Pb(II) pollutants from wastewater.

    PubMed

    Chu, Lin; Liu, Chengbin; Zhou, Guiyin; Xu, Rui; Tang, Yanhong; Zeng, Zebing; Luo, Shenglian

    2015-12-30

    A high strength of polyving alcohol/polyacrylic acid double network gel (PVA/PAA gel) adsorbent was successfully prepared by a simple two-step method in this study. The gel adsorbent possessed the advantages of low cost and high adsorptivity for heavy metals in solution. The maximum uptake capacities of PVA/PAA gel were 194.99 mg/g for Pb(II) and 115.88 mg/g for Cd(II) inferred from the Langmuir model at 303 K. At the concentration levels of Pb(II)<150 mg/L and Cd(II)<100mg/L, the Pb(II) and Cd(II) could be completely adsorbed, showing a great potential of removing heavy metals from wastewater. Simultaneously, the PVA/PAA gel adsorbent exhibited an excellent reusability. Even in the fifth cycle, the removal efficiencies of both Pb(II) and Cd(II) remained nearly 100%. Significantly, the gel adsorbent displayed a satisfactory performance of removing heavy metals in actual industrial effluent. The results reveal that the double network gel can be considered as a potential candidate for practical application.

  1. Aging assessment of nuclear air-treatment system HEPA filters and adsorbers. Volume 1, Phase 1

    SciTech Connect

    Winegardner, W.K.

    1993-08-01

    A Phase I aging assessment of high-efficiency particulate air (HEPA) filters and activated carbon gas adsorption units (adsorbers) was performed by the Pacific Northwest Laboratory (PNL) as part of the US Nuclear Regulatory Commission`s (NRC) Nuclear Plant Aging Research (NPAR) Program. Information concerning design features; failure experience; aging mechanisms, effects, and stressors; and surveillance and monitoring methods for these key air-treatment system components was compiled. Over 1100 failures, or 12 percent of the filter installations, were reported as part of a Department of Energy (DOE) survey. Investigators from other national laboratories have suggested that aging effects could have contributed to over 80 percent of these failures. Tensile strength tests on aged filter media specimens indicated a decrease in strength. Filter aging mechanisms range from those associated with particle loading to reactions that alter properties of sealants and gaskets. Low radioiodine decontamination factors associated with the Three Mile Island (TMI) accident were attributed to the premature aging of the carbon in the adsorbers. Mechanisms that can lead to impaired adsorber performance include oxidation as well as the loss of potentially available active sites as a result of the adsorption of pollutants. Stressors include heat, moisture, radiation, and airborne particles and contaminants.

  2. Occurrence and Control of Legionella in Recycled Water Systems.

    PubMed

    Jjemba, Patrick K; Johnson, William; Bukhari, Zia; LeChevallier, Mark W

    2015-01-01

    Legionella pneumophila is on the United States Environmental Protection Agency (USEPA) Candidate Contaminant list (CCL) as an important pathogen. It is commonly encountered in recycled water and is typically associated with amoeba, notably Naegleria fowleri (also on the CCL) and Acanthamoeba sp. No legionellosis outbreak has been linked to recycled water and it is important for the industry to proactively keep things that way. A review was conducted examine the occurrence of Legionella and its protozoa symbionts in recycled water with the aim of developing a risk management strategy. The review considered the intricate ecological relationships between Legionella and protozoa, methods for detecting both symbionts, and the efficacy of various disinfectants. PMID:26140674

  3. Occurrence and Control of Legionella in Recycled Water Systems

    PubMed Central

    Jjemba, Patrick K.; Johnson, William; Bukhari, Zia; LeChevallier, Mark W.

    2015-01-01

    Legionella pneumophila is on the United States Environmental Protection Agency (USEPA) Candidate Contaminant list (CCL) as an important pathogen. It is commonly encountered in recycled water and is typically associated with amoeba, notably Naegleria fowleri (also on the CCL) and Acanthamoeba sp. No legionellosis outbreak has been linked to recycled water and it is important for the industry to proactively keep things that way. A review was conducted examine the occurrence of Legionella and its protozoa symbionts in recycled water with the aim of developing a risk management strategy. The review considered the intricate ecological relationships between Legionella and protozoa, methods for detecting both symbionts, and the efficacy of various disinfectants. PMID:26140674

  4. Assessment of Food Waste Prevention and Recycling Strategies Using a Multilayer Systems Approach.

    PubMed

    Hamilton, Helen A; Peverill, M Samantha; Müller, Daniel B; Brattebø, Helge

    2015-12-15

    Food waste (FW) generates large upstream and downstream emissions to the environment and unnecessarily consumes natural resources, potentially affecting future food security. The ecological impacts of FW can be addressed by the upstream strategies of FW prevention or by downstream strategies of FW recycling, including energy and nutrient recovery. While FW recycling is often prioritized in practice, the ecological implications of the two strategies remain poorly understood from a quantitative systems perspective. Here, we develop a multilayer systems framework and scenarios to quantify the implications of food waste strategies on national biomass, energy, and phosphorus (P) cycles, using Norway as a case study. We found that (i) avoidable food waste in Norway accounts for 17% of sold food; (ii) 10% of the avoidable food waste occurs at the consumption stage, while industry and retailers account for only 7%; (iii) the theoretical potential for systems-wide net process energy savings is 16% for FW prevention and 8% for FW recycling; (iv) the theoretical potential for systems-wide P savings is 21% for FW prevention and 9% for FW recycling; (v) while FW recycling results in exclusively domestic nutrient and energy savings, FW prevention leads to domestic and international savings due to large food imports; (vi) most effective is a combination of prevention and recycling, however, FW prevention reduces the potential for FW recycling and therefore needs to be prioritized to avoid potential overcapacities for FW recycling.

  5. Assessment of Food Waste Prevention and Recycling Strategies Using a Multilayer Systems Approach.

    PubMed

    Hamilton, Helen A; Peverill, M Samantha; Müller, Daniel B; Brattebø, Helge

    2015-12-15

    Food waste (FW) generates large upstream and downstream emissions to the environment and unnecessarily consumes natural resources, potentially affecting future food security. The ecological impacts of FW can be addressed by the upstream strategies of FW prevention or by downstream strategies of FW recycling, including energy and nutrient recovery. While FW recycling is often prioritized in practice, the ecological implications of the two strategies remain poorly understood from a quantitative systems perspective. Here, we develop a multilayer systems framework and scenarios to quantify the implications of food waste strategies on national biomass, energy, and phosphorus (P) cycles, using Norway as a case study. We found that (i) avoidable food waste in Norway accounts for 17% of sold food; (ii) 10% of the avoidable food waste occurs at the consumption stage, while industry and retailers account for only 7%; (iii) the theoretical potential for systems-wide net process energy savings is 16% for FW prevention and 8% for FW recycling; (iv) the theoretical potential for systems-wide P savings is 21% for FW prevention and 9% for FW recycling; (v) while FW recycling results in exclusively domestic nutrient and energy savings, FW prevention leads to domestic and international savings due to large food imports; (vi) most effective is a combination of prevention and recycling, however, FW prevention reduces the potential for FW recycling and therefore needs to be prioritized to avoid potential overcapacities for FW recycling. PMID:26496178

  6. Phase-field modeling of epitaxial growth in stochastic systems with interacting adsorbate

    NASA Astrophysics Data System (ADS)

    Kharchenko, Dmitrii O.; Kharchenko, Vasyl O.; Lysenko, Irina O.

    2011-04-01

    We study the epitaxial growth of pyramidal patterns in stochastic systems with interacting adsorbate within the framework of the phase-field approach based on the Burton-Cabrera-Frank model. Considering the statistical criteria of pattern formation, it is shown that the system dynamics is governed by the interaction strength of adatoms and the noise intensity of the total flux fluctuations. We have shown that the noise action can crucially change the processes of pyramidal pattern formation. The scaling behavior of the height-height correlation function is discussed.

  7. Effects of welding fumes on nuclear air cleaning system carbon adsorber banks

    SciTech Connect

    Roberson, P.W.

    1997-08-01

    Standard Technical Specifications for nuclear air cleaning systems include requirements for surveillance tests following fire, painting, or chemical release in areas communicating with the affected system. To conservatively implement this requirement, many plants categorize welding as a chemical release process, and institute controls to ensure that welding fumes do not interact with carbon adsorbers in a filter system. After reviewing research data that indicated welding had a minimal impact on adsorber iodine removal efficiency, further testing was performed with the goal of establishing a welding threshold. It was anticipated that some quantity of weld electrodes could be determined that had a corresponding detrimental impact on iodine removal efficiency for the exposed adsorber. This value could be used to determine a conservative sampling schedule that would allow the station to perform laboratory testing to ensure system degradation did not occur without a full battery of surveillance tests. A series of tests was designed to demonstrate carbon efficiency versus cumulative welding fume exposure. Three series of tests were performed, one for each of three different types of commonly used weld electrodes. Carbon sampling was performed at baseline conditions, and every five pounds of electrode thereafter. Two different laboratory tests were performed for each sample; one in accordance with ASTM 3803/1989 at 95% relative humidity and 30 degrees C, and another using the less rigorous conditions of 70% relative humidity and 80 degrees C. Review of the test data for all three types of electrodes failed to show a significant correlation between carbon efficiency degradation and welding fume exposure. Accordingly, welding is no longer categorized as a `chemical release process` at McGuire Nuclear Station, and limits on welding fume interaction with ventilation systems have been eliminated. 4 refs., 3 figs., 1 tab.

  8. A financing system for battery recycling in Switzerland

    NASA Astrophysics Data System (ADS)

    Jordi, Hanspeter

    The household battery recycling procedures presently in progress in Switzerland are illustrated. Particular attention is devoted to the description of the country's organizations for providing an efficient battery disposal plan. The financial aspects of this plan are also outlined.

  9. Using specialized adsorbents for remediation

    SciTech Connect

    Hochmuth, D.P.; Grant, A.

    1995-11-01

    This paper describes two remediation case studies in which specialized adsorbents were used. In one case, the adsorbents were used to treat effluent from a soil vapor extraction system. In the other case, the adsorbents were used to treat air from a groundwater air stripper. The specialized adsorbents effectively removed volatile organic compounds from each air stream.

  10. Molecular adsorbent recirculating system as artificial support therapy for liver failure: a meta-analysis.

    PubMed

    Vaid, Arjun; Chweich, Haval; Balk, Ethan M; Jaber, Bertrand L

    2012-01-01

    Molecular Adsorbent Recirculating System (MARS) is an artificial liver support system that has been developed for patients with liver failure until the liver regains function or as a bridge to transplantation. We conducted a meta-analysis to examine the efficacy of this promising therapy. We searched MEDLINE, EMBASE, and the Cochrane Registry of Controlled Trials databases, and abstracts from the proceedings of several scientific meetings. Patients with acute, acute on chronic, and hyperacute liver failure were included and we compared MARS with standard medical therapy. Randomized and nonrandomized controlled trials were included and Molecular Adsorbent Recirculating System was the intervention used. We evaluated net change in total bilirubin levels, improvement in hepatic encephalopathy and mortality. Nine randomized controlled trials and one nonrandomized controlled study met criteria and were included. By meta-analysis, MARS resulted in a significant decrease in total bilirubin levels (net change -7.0 mg/dl; 95% CI -10.4, -3.7; p < 0.001) and in an improvement in the West-Haven grade of hepatic encephalopathy (odds ratio [OR] 3.0; 95% CI 1.9, 5.0; p < 0.001). There was no beneficial effect on mortality (OR 0.91; 95% CI 0.64, 1.31; p = 0.62). The limitations of this study include a small sample size, an inability to blind with significant heterogeneity among studies, and variable definitions of liver failure. The Molecular Adsorbent Recirculating System is associated with a significant improvement in total bilirubin levels and hepatic encephalopathy but has no impact on survival. Large studies are required to assess the merit of this promising therapy on patient-centered outcomes. PMID:22210651

  11. A new optional recycled water pre-treatment system prior to use in the household laundry.

    PubMed

    Chen, Zhuo; Ngo, Huu Hao; Guo, Wenshan; Pham, Thi Thu Nga; Lim, Richard; Wang, Xiaochang C; Miechel, Clayton; Halloran, Kelly O'; Listowski, Andrzej; Corby, Nigel

    2014-04-01

    With a constantly growing population, water scarcity becomes the limiting factor for further social and economic growth. To achieve a partial reduction in current freshwater demands and lessen the environmental loadings, an increasing trend in the water market tends to adopt recycled water for household laundries as a new recycled water application. The installation of a small pre-treatment unit for water purification can not only further improve the recycled water quality, but also be viable to enhance the public confidence and acceptance level on recycled water consumption. Specifically, this paper describes column experiments conducted using a 550 mm length bed of zeolite media as a one-dimensional flow reactor. The results show that the zeolite filter system could be a simple low-cost pre-treatment option which is able to significantly reduce the total hardness level of recycled water via effective ion exchange. Additionally, depending on the quality of recycled water required by end users, a new by-pass controller using a three-level operation switching mechanism is introduced. This approach provides householders sufficient flexibility to respond to different levels of desired recycled water quality and increase the reliability of long-term system operation. These findings could be beneficial to the smooth implementation of new end uses and expansion of the potential recycled water market. The information could also offer sound suggestions for future research on sustainable water management and governance.

  12. Adsorbate-induced quantum Hall system probed by scanning tunneling spectroscopy combined with transport measurements

    SciTech Connect

    Masutomi, Ryuichi Okamoto, Tohru

    2015-06-22

    An adsorbate-induced quantum Hall system at the cleaved InSb surfaces is investigated in magnetic fields up to 14 T using low-temperature scanning tunneling microscopy and spectroscopy combined with transport measurements. We show that an enhanced Zeeman splitting in the Shubnikov-de Haas oscillations is explained by an exchange enhancement of spin splitting and potential disorder, both of which are obtained from the spatially averaged density of states (DOS). Moreover, the Altshuler–Aronov correlation gap is observed in the spatially averaged DOS at 0 T.

  13. A new rate index for environmental monitoring of combined reuse/recycle packaging systems.

    PubMed

    Tsiliyannis, Christos A

    2005-08-01

    It is shown that the conventional recycling rate fails to reflect environmental performance for packaging flows with both recycle and reuse. The reuse rate, the total number of reuse trips and the reuse- lifetime are also shown to be inadequate. A new rate index defined in terms of the total amount of packaging material reaching the consumer is proposed. It reflects immediate improvements in environmental impact according to specific criteria and it reduces to the conventional rate for systems with only recycle. Albeit this shortcut environmental assessment is not entirely comprehensive and does not unveil a full sustainability profile, it may be useful for immediate packaging flow evaluation and policy implementation. For given packaging production technology it reveals a specific maximum level on recycling, below which environmental impacts from processing are limited or reduced, even if production level grows. Cleaner technologies in reprocessing of recycled materials may elevate this maximum level while still limiting or reducing environmental impacts.

  14. A new rate index for environmental monitoring of combined reuse/recycle packaging systems.

    PubMed

    Tsiliyannis, Christos A

    2005-08-01

    It is shown that the conventional recycling rate fails to reflect environmental performance for packaging flows with both recycle and reuse. The reuse rate, the total number of reuse trips and the reuse- lifetime are also shown to be inadequate. A new rate index defined in terms of the total amount of packaging material reaching the consumer is proposed. It reflects immediate improvements in environmental impact according to specific criteria and it reduces to the conventional rate for systems with only recycle. Albeit this shortcut environmental assessment is not entirely comprehensive and does not unveil a full sustainability profile, it may be useful for immediate packaging flow evaluation and policy implementation. For given packaging production technology it reveals a specific maximum level on recycling, below which environmental impacts from processing are limited or reduced, even if production level grows. Cleaner technologies in reprocessing of recycled materials may elevate this maximum level while still limiting or reducing environmental impacts. PMID:16200980

  15. Recycled Materials Affirmative Procurement Tracking System (RMAPTS). Software user`s manual

    SciTech Connect

    Not Available

    1994-07-01

    RMAPTS is designed to interact with other computer systems. This system can upload or download data from other RMAPTS systems. RMAPTS also complies with Federal Acquisition Regulations (FARs). Section 6002 of the Resource Conservation of Recovery Act (RCRA), Title 40 Part 247-25 of the Code of Federal Regulations, and Executive Order 12780 present mandates and guidelines to the Department of Energy (DOE) and its contractors for the procurement of products containing recycled materials. These regulations promote cost-effective waste reduction and recovery of reusable materials from Federally generated waste; promote environmentally sound and economically efficient waste reduction and recycling of the nation`s resources; and stimulate private sector markets through preferential procurement of designated items. On August 4, 1992, the Deputy Secretary of the Department of Energy requested DOE to show its commitment to Executive Order 12780, Federal Agency Recycling and Procurement Policy. This software was developed in response to this request. RMAPTS will allow users to track and report specific data concerning the procurement of products that contain recycled material and the quantity of recycled material contained in each product. This system provides greater detail, improved accuracy, and less time spent on year-end reporting. Users can quickly check the year-to-date status of recycled material purchases and recycled material contents of products at any time.

  16. System for recycling char in iron oxide reducing kilns

    SciTech Connect

    Baker, A.C.; Keran, V.P.

    1983-03-08

    A method and means for improving the efficiency of the process for directly reducing ore containing iron oxide in a rotary kiln using a solid carbonaceous reducing agent, such as coal, introduced from the ore feed and discharge ends of the kiln, as both fuel and reductant, is disclosed wherein the charred coal or char found in the discharge product is recycled into the process at the discharge end of the kiln rather than the feed end as in the prior art. In particular, the recovered char, both coarse and finer particles, are transported to a recycle bin from which they are returned at a preselected rate to the kiln process by being injected along with the coal blown into the discharge end of the kiln. Alternatively, the recycle char alone may be fed without any coal at the discharge end of the kiln.

  17. A dual-adsorbent preconcentrator for a portable indoor-VOC microsensor system.

    PubMed

    Lu, C J; Zellers, E T

    2001-07-15

    The development and testing of a miniature dual-adsorbent preconcentrator for a microsensor-based analytical system designed to determine complex volatile organic chemical (VOC) mixtures encountered in indoor working environments at low part-per-billion levels is described. Candidate adsorbents were screened for thermal-desorption bandwidth and breakthrough volume against 20 volatile organic vapors and subsets thereof as a function of several relevant variables. A glass capillary (1.1 mm i.d.) packed with 3.4 mg of Carbopack X and 1.2 mg of Carboxen 1000 provides sufficient capacity for a 1-L dry-air sample containing all 20 vapors at concentrations of 100 ppb as well as providing a composite half-height peak width of <3 s at a desorption temperature of 300 degrees C and a flow rate of 4 mL/min. Required adsorbent masses increase to 7.0 and 1.5 mg, respectively, for the same mixture at component concentrations of 1 ppm. Vapor breakthrough volumes for the Carbopack X are unaffected by humidity from 0 to 100%RH, but those for the Carboxen 1000 are significantly reduced, requiring an additional 0.9 mg of the latter to avoid premature breakthrough at the 100 ppb level. Good peak shapes, efficient chromatographic separation of preconcentrated sample mixture components, and detection limits in the low-parts-per-billion range using an integrated surface-acoustic-wave (SAW) sensor are achieved. Preconcentrator design and operating parameters are considered in terms of the vapor bed-residence times and breakthrough volumes in the context of the modified Wheeler equation.

  18. A dual-adsorbent preconcentrator for a portable indoor-VOC microsensor system.

    PubMed

    Lu, C J; Zellers, E T

    2001-07-15

    The development and testing of a miniature dual-adsorbent preconcentrator for a microsensor-based analytical system designed to determine complex volatile organic chemical (VOC) mixtures encountered in indoor working environments at low part-per-billion levels is described. Candidate adsorbents were screened for thermal-desorption bandwidth and breakthrough volume against 20 volatile organic vapors and subsets thereof as a function of several relevant variables. A glass capillary (1.1 mm i.d.) packed with 3.4 mg of Carbopack X and 1.2 mg of Carboxen 1000 provides sufficient capacity for a 1-L dry-air sample containing all 20 vapors at concentrations of 100 ppb as well as providing a composite half-height peak width of <3 s at a desorption temperature of 300 degrees C and a flow rate of 4 mL/min. Required adsorbent masses increase to 7.0 and 1.5 mg, respectively, for the same mixture at component concentrations of 1 ppm. Vapor breakthrough volumes for the Carbopack X are unaffected by humidity from 0 to 100%RH, but those for the Carboxen 1000 are significantly reduced, requiring an additional 0.9 mg of the latter to avoid premature breakthrough at the 100 ppb level. Good peak shapes, efficient chromatographic separation of preconcentrated sample mixture components, and detection limits in the low-parts-per-billion range using an integrated surface-acoustic-wave (SAW) sensor are achieved. Preconcentrator design and operating parameters are considered in terms of the vapor bed-residence times and breakthrough volumes in the context of the modified Wheeler equation. PMID:11476247

  19. Zerovalent iron encapsulated chitosan nanospheres - a novel adsorbent for the removal of total inorganic arsenic from aqueous systems.

    PubMed

    Gupta, Anjali; Yunus, M; Sankararamakrishnan, Nalini

    2012-01-01

    Evaluation of Chitosan zerovalent Iron Nanoparticle (CIN) towards arsenic removal is presented. Addition of chitosan enhances the stability of Fe(0) nano particle. Prepared adsorbent was characterized by FT-IR, SEM EDX, BET and XRD. It was found that, with an initial dose rate of 0.5 g L(-1), concentrations of As (III) and As (V) were reduced from 2 mg L(-1) to <5 μg L(-1) in less than 180 min and the adsorbent was found to be applicable in wide range of pH. Langmuir monolayer adsorption capacity was found to be 94±1.5 mg g(-1) and 119±2.6 mg g(-1) at pH 7 for As (III) and As (V) respectively. Major anions including sulfate, phosphate and silicate did not cause significant interference in the adsorption behavior of both arsenite and arsenate. The adsorbent was successfully recycled five times and applied to the removal of total inorganic arsenic from real life groundwater samples.

  20. Clean Community System Multi-Material Recycling Manual.

    ERIC Educational Resources Information Center

    Keep America Beautiful, Inc., New York, NY.

    This manual is designed to assist communities in recycling the greatest possible volume of materials in ways which will: (1) benefit the local economy; (2) encourage cooperation between public and private sectors; and (3) prove valuable to municipal and county sanitation services. The manual is divided into five sections. Section 1 lays out the…

  1. Methods to reduce bacterial contamination of recycling cooling systems of a CHPP

    NASA Astrophysics Data System (ADS)

    Chichirova, N. D.; Chichirov, A. A.; Vlasov, S. M.; Vlasova, A. Yu.

    2015-07-01

    Bacterial contamination of circulating and make-up water of the nonconjugated recycling cooling system with evaporative cooling towers of thermal power plants is studied. The nonconjugated recycling cooling system of Naberezhnochelninskaya CHP Plant was selected as the object of study. It was found that circulating water of recycling cooling is highly contaminated with aerobic heterotrophic bacteria. At the same time, make-up water for the cooling system from the Kama River is moderately polluted with anaerobic bacteria. Measurements of biological contamination in different parts of the recycling cooling system showed that populations of colonies of microorganisms abruptly decreases in turbine condensers, which is probably indicative of their death and deposition on the heat transfer surface of the condenser. Calculation using a special program showed that biological contamination of the recycling cooling system poses the greatest risks for clogging of the equipment (seven points on a nine-point scale), its corrosion (two points), and damage to the health of personnel (two points). Rapid development of aerobic bacteria apparently occurs under elevated temperature and intense aeration of water in the cooling tower. It is suggested to periodically monitor the recycling cooling system for biological pollution and to set a timetable for bactericidal treatment of circulating water depending on the level of its bacterial contamination.

  2. Review article: the molecular adsorbents recirculating system (MARS) in liver failure.

    PubMed

    Sen, S; Mookerjee, R P; Davies, N A; Williams, R; Jalan, R

    2002-12-01

    In recent years different artificial liver support systems are being developed for use in patients with acute decompensation of chronic liver disease or acute liver failure. The molecular adsorbents recirculating system (MARS), a device in which patient's blood is dialysed across an albumin-impregnated membrane against a recirculated albumin-containing solution, seems to be effective in removing albumin-bound toxins, such as fatty acids, bile acids and bilirubin. Although the clinical experience with MARS is scarce, some pilot studies have reported its effectiveness at improving liver function and hepatic encephalopathy in patients with acute decompensation of chronic liver disease, and renal function in patients with hepatorenal syndrome type I. Data regarding MARS experience in acute liver failure and in primary graft dysfunction are encouraging but limited. Its real usefulness in these settings is, at present, under evaluation in randomized controlled clinical trials.

  3. Continuous fermentative hydrogen production using a two-phase reactor system with recycle.

    PubMed

    Kraemer, Jeremy T; Bagley, David M

    2005-05-15

    The effects of effluent recycle were examined in a two-phase anaerobic system where the first phase was operated for fermentative hydrogen production and the second for methanogenesis. The hydrogen reactor was operated as a chemostat at 35 degrees C and pH 5.5 with a 10 h hydraulic retention time, and the methane reactor was operated as an up-flow reactor at 28 degrees C and pH between 6.9 and 7.2. Two recycle ratios were examined: 0 and 0.98. Effluent recycle reduced the required alkalinity for pH control by approximately 40%. The H2 productivity metric, with a basis in electrons and incorporating both gaseous and dissolved H2, was developed as a more fundamental reporting method than the molar H2 yield. Without recycle, the H2 productivity was 0.115 g of H2 COD/g of feed COD, but decreased to 0.015 q of H2 COD/g of feed COD with recycle (COD = chemical oxygen demand). Mass balances indicated the lower H2 productivity during recycle was due to electrons being partitioned to methane and less-oxidized soluble constituents such as propionic acid, ethanol, and butanol. The results indicated that achieving high H2 productivity with nonsterile wastewaters will be challenging and membrane filtration of the recycle liquid may be required to exclude the return of hydrogen-consuming organisms.

  4. Modulating resonance behaviors by noise recycling in bistable systems with time delay

    SciTech Connect

    Sun, Zhongkui Xu, Wei; Yang, Xiaoli; Xiao, Yuzhu

    2014-06-01

    In this paper, the impact of noise recycling on resonance behaviors is studied theoretically and numerically in a prototypical bistable system with delayed feedback. According to the interior cooperating and interacting activity of noise recycling, a theory has been proposed by reducing the non-Markovian problem into a two-state model, wherein both the master equation and the transition rates depend on not only the current state but also the earlier two states due to the recycling lag and the feedback delay. By virtue of this theory, the formulae of the power spectrum density and the linear response function have been found analytically. And the theoretical results are well verified by numerical simulations. It has been demonstrated that both the recycling lag and the feedback delay play a crucial role in the resonance behaviors. In addition, the results also suggest an alternative scheme to modulate or control the coherence or stochastic resonance in bistable systems with time delay.

  5. Aluminosilicate-based adsorbent in equimolar and non-equimolar binary-component heavy metal removal systems.

    PubMed

    Xu, Meng; Hadi, Pejman; Ning, Chao; Barford, John; An, Kyoung Jin; McKay, Gordon

    2015-01-01

    Cadmium (Cd) and lead (Pb) are toxic heavy metals commonly used in various industries. The simultaneous presence of these metals in wastewater amplifies the toxicity of wastewater and the complexity of the treatment process. This study has investigated the selective behavior of an aluminosilicate-based mesoporous adsorbent. It has been demonstrated that when equimolar quantities of the metals are present in wastewater, the adsorbent uptakes the Pb²⁺ ions selectively. This has been attributed to the higher electronegativity value of Pb²⁺ compared to Cd²⁺ which can be more readily adsorbed on the adsorbent surface, displacing the Cd²⁺ ions. The selectivity can be advantageous when the objective is the separation and reuse of the metals besides wastewater treatment. In non-equimolar solutions, a complete selectivity can be observed up to a threshold Pb²⁺ molar ratio of 30%. Below this threshold value, the Cd²⁺ and Pb²⁺ ions are uptaken simultaneously due to the abundance of Cd²⁺ ions and the availability of adsorption sites at very low Pb²⁺ molar ratios. Moreover, the total adsorption capacities of the adsorbent for the multi-component system have been shown to be in the same range as the single-component system for each metal ion which can be of high value for industrial applications. PMID:26676004

  6. Aluminosilicate-based adsorbent in equimolar and non-equimolar binary-component heavy metal removal systems.

    PubMed

    Xu, Meng; Hadi, Pejman; Ning, Chao; Barford, John; An, Kyoung Jin; McKay, Gordon

    2015-01-01

    Cadmium (Cd) and lead (Pb) are toxic heavy metals commonly used in various industries. The simultaneous presence of these metals in wastewater amplifies the toxicity of wastewater and the complexity of the treatment process. This study has investigated the selective behavior of an aluminosilicate-based mesoporous adsorbent. It has been demonstrated that when equimolar quantities of the metals are present in wastewater, the adsorbent uptakes the Pb²⁺ ions selectively. This has been attributed to the higher electronegativity value of Pb²⁺ compared to Cd²⁺ which can be more readily adsorbed on the adsorbent surface, displacing the Cd²⁺ ions. The selectivity can be advantageous when the objective is the separation and reuse of the metals besides wastewater treatment. In non-equimolar solutions, a complete selectivity can be observed up to a threshold Pb²⁺ molar ratio of 30%. Below this threshold value, the Cd²⁺ and Pb²⁺ ions are uptaken simultaneously due to the abundance of Cd²⁺ ions and the availability of adsorption sites at very low Pb²⁺ molar ratios. Moreover, the total adsorption capacities of the adsorbent for the multi-component system have been shown to be in the same range as the single-component system for each metal ion which can be of high value for industrial applications.

  7. Occurrence and fate of acrylamide in water-recycling systems and sludge in aggregate industries.

    PubMed

    Junqua, Guillaume; Spinelli, Sylvie; Gonzalez, Catherine

    2015-05-01

    Acrylamide is a hazardous substance having irritant and toxic properties as well as carcinogen, mutagen, and impaired fertility possible effects. Acrylamide might be found in the environment as a consequence of the use of polyacrylamides (PAMs) widely added as a flocculant for water treatment. Acrylamide is a monomer used to produce polyacrylamide (PAM) polymers. This reaction of polymerization can be incomplete, and acrylamide molecules can be present as traces in the commercial polymer. Thus, the use of PAMs may generate a release of acrylamide in the environment. In aggregate industries, PAM is widely involved in recycling process and water reuse (aggregate washing). Indeed, these industries consume large quantities of water. Thus, European and French regulations have favored loops of recycling of water in order to reduce water withdrawals. The main goal of this article is to study the occurrence and fate of acrylamide in water-recycling process as well as in the sludge produced by the flocculation treatment process in aggregate production plants. Moreover, to strengthen the relevance of this article, the objective is also to demonstrate if the recycling system leads to an accumulation effect in waters and sludge and if free acrylamide could be released by sludge during their storage. To reach this objective, water sampled at different steps of recycling water process has been analyzed as well as different sludge corresponding to various storage times. The obtained results reveal no accumulation effect in the water of the water-recycling system nor in the sludge.

  8. Estimation of future outflows and infrastructure needed to recycle personal computer systems in California.

    PubMed

    Kang, Hai-Yong; Schoenung, Julie M

    2006-09-21

    The objectives of the present study are to estimate future quantities of electronic waste (e-waste) for which appropriate infrastructure needs to be established, and to the estimate the total cost for e-waste recycling in California. Estimation of the future amounts of e-waste as a function of time is critical to effective e-waste management. To generate estimates, we use a time-series materials flow analysis model (MFAM). The model estimates future e-waste quantities by modeling the stages of production, usage, and disposal. We consider four scenarios for the estimation of future e-waste generation in order to consider the effects of exportation outside the State of California and of user preferences to store or to recycle the e-waste. These efforts were further investigated through the use of sensitivity analysis. The results of the present research indicate that the outflow (recycling) amount of central processing units (CPUs) will increase and will reach approximately 8.5 million units per year in 2013, but the outflow (recycling) of cathode ray tube (CRT) monitors will decrease from 2004 in California because of the replacement of CRT monitors by liquid crystal display (LCD) monitors. In 2013, the cost for CPU recycling will be 1.7 times higher than that in 2005. But for CRT monitors, the cost for recycling in 2013 will be negligible. After the State of California enacted the ban on landfill disposal of e-waste, recycling became the most common end-of-life (EOL) option in California. Also, after 2005, the State of California will need more than 60 average-capacity materials recovery facilities (MRFs), to recycle the number of personal computer systems generated, which represents an investment in capital of over 16 million dollars.

  9. Continuous butanol fermentation from xylose with high cell density by cell recycling system.

    PubMed

    Zheng, Jin; Tashiro, Yukihiro; Yoshida, Tsuyoshi; Gao, Ming; Wang, Qunhui; Sonomoto, Kenji

    2013-02-01

    A continuous butanol production system with high-density Clostridium saccharoperbutylacetonicum N1-4 generated by cell recycling was established to examine the characteristics of butanol fermentation from xylose. In continuous culture without cell recycling, cell washout was avoided by maintaining pH>5.6 at a dilution rate of 0.26 h(-1), indicating pH control was critical to this experiment. Subsequently, continuous culture with cell recycling increased cell concentration to 17.4 g L(-1), which increased butanol productivity to 1.20 g L(-1) h(-1) at a dilution rate of 0.26 h(-1) from 0.529 g L(-1) h(-1) without cell recycling. The effect of dilution rates on butanol production was also investigated in continuous culture with cell recycling. Maximum butanol productivity (3.32 g L(-1) h(-1)) was observed at a dilution rate of 0.78 h(-1), approximately 6-fold higher than observed in continuous culture without cell recycling (0.529 g L(-1) h(-1)).

  10. Effect of adsorbed films on friction of Al2O3-metal systems

    NASA Technical Reports Server (NTRS)

    Pepper, S. V.

    1976-01-01

    The kinetic friction of polycrystalline Al2O3 sliding on Cu, Ni, and Fe in ultrahigh vacuum was studied as a function of the surface chemistry of the metal. Clean metal surfaces were exposed to O2, Cl2, C2H4, and C2H3Cl, and the change in friction due to the adsorbed species was observed. Auger electron spectroscopy assessed the elemental composition of the metal surface. It was found that the systems exposed to Cl2 exhibited low friction, interpreted as the van der Waals force between the Al2O3 and metal chloride. The generation of metal oxide by oxygen exposures resulted in an increase in friction, interpreted as due to strong interfacial bonds established by reaction of metal oxide with Al2O3 to form the complex oxide (spinel). The only effect of C2H4 was to increase the friction of the Fe system, but C2H3Cl exposures decreases friction in both Ni and Fe systems, indicating the dominance of the chlorine over the ethylene complex on the surface

  11. Adsorbent phosphates

    NASA Technical Reports Server (NTRS)

    Watanabe, S.

    1983-01-01

    An adsorbent which uses as its primary ingredient phosphoric acid salts of zirconium or titanium is presented. Production methods are discussed and several examples are detailed. Measurements of separating characteristics of some gases using the salts are given.

  12. Coupling plant growth and waste recycling systems in a controlled life support system (CELSS)

    NASA Technical Reports Server (NTRS)

    Garland, Jay L.

    1992-01-01

    The development of bioregenerative systems as part of the Controlled Ecological Life Support System (CELSS) program depends, in large part, on the ability to recycle inorganic nutrients, contained in waste material, into plant growth systems. One significant waste (resource) stream is inedible plant material. This research compared wheat growth in hydroponic solutions based on inorganic salts (modified Hoagland's) with solutions based on the soluble fraction of inedible wheat biomass (leachate). Recycled nutrients in leachate solutions provided the majority of mineral nutrients for plant growth, although additions of inorganic nutrients to leachate solutions were necessary. Results indicate that plant growth and waste recyling systems can be effectively coupled within CELSS based on equivalent wheat yield in leachate and Hoagland solutions, and the rapid mineralization of waste organic material in the hydroponic systems. Selective enrichment for microbial communities able to mineralize organic material within the leachate was necessary to prevent accumulation of dissolved organic matter in leachate-based solutions. Extensive analysis of microbial abundance, growth, and activity in the hydroponic systems indicated that addition of soluble organic material from plants does not cause excessive microbial growth or 'biofouling', and helped define the microbially-mediated flux of carbon in hydroponic solutions.

  13. Hydraulic characterization of an activated sludge reactor with recycling system by tracer experiment and analytical models.

    PubMed

    Sánchez, F; Viedma, A; Kaiser, A S

    2016-09-15

    Fluid dynamic behaviour plays an important role in wastewater treatment. An efficient treatment requires the inexistence of certain hydraulic problems such as dead zones or short-circuiting flows. Residence time distribution (RTD) analysis is an excellent technique for detecting these inefficiencies. However, many wastewater treatment installations include water or sludge recycling systems, which prevent us from carrying out a conventional tracer pulse experiment to obtain the RTD curve of the installation. This paper develops an RTD analysis of an activated sludge reactor with recycling system. A tracer experiment in the reactor is carried out. Three analytical models, derived from the conventional pulse model, are proposed to obtain the RTD curve of the reactor. An analysis of the results is made, studying which model is the most suitable for each situation. This paper is useful to analyse the hydraulic efficiency of reactors with recycling systems. PMID:27288672

  14. Hydraulic characterization of an activated sludge reactor with recycling system by tracer experiment and analytical models.

    PubMed

    Sánchez, F; Viedma, A; Kaiser, A S

    2016-09-15

    Fluid dynamic behaviour plays an important role in wastewater treatment. An efficient treatment requires the inexistence of certain hydraulic problems such as dead zones or short-circuiting flows. Residence time distribution (RTD) analysis is an excellent technique for detecting these inefficiencies. However, many wastewater treatment installations include water or sludge recycling systems, which prevent us from carrying out a conventional tracer pulse experiment to obtain the RTD curve of the installation. This paper develops an RTD analysis of an activated sludge reactor with recycling system. A tracer experiment in the reactor is carried out. Three analytical models, derived from the conventional pulse model, are proposed to obtain the RTD curve of the reactor. An analysis of the results is made, studying which model is the most suitable for each situation. This paper is useful to analyse the hydraulic efficiency of reactors with recycling systems.

  15. Modeling adsorption: Investigating adsorbate and adsorbent properties

    NASA Astrophysics Data System (ADS)

    Webster, Charles Edwin

    1999-12-01

    Surface catalyzed reactions play a major role in current chemical production technology. Currently, 90% of all chemicals are produced by heterogeneously catalyzed reactions. Most of these catalyzed reactions involve adsorption, concentrating the substrate(s) (the adsorbate) on the surface of the solid (the adsorbent). Pore volumes, accessible surface areas, and the thermodynamics of adsorption are essential in the understanding of solid surface characteristics fundamental to catalyst and adsorbent screening and selection. Molecular properties such as molecular volumes and projected molecular areas are needed in order to convert moles adsorbed to surface volumes and areas. Generally, these molecular properties have been estimated from bulk properties, but many assumptions are required. As a result, different literature values are employed for these essential molecular properties. Calculated molar volumes and excluded molecular areas are determined and tabulated for a variety of molecules. Molecular dimensions of molecules are important in the understanding of molecular exclusion as well as size and shape selectivity, diffusion, and adsorbent selection. Molecular dimensions can also be used in the determination of the effective catalytic pore size of a catalyst. Adsorption isotherms, on zeolites, (crystalline mineral oxides) and amorphous solids, can be analyzed with the Multiple Equilibrium Analysis (MEA) description of adsorption. The MEA produces equilibrium constants (Ki), capacities (ni), and thermodynamic parameters (enthalpies, ΔHi, and entropies, ΔSi) of adsorption for each process. Pore volumes and accessible surface areas are calculated from the process capacities. Adsorption isotherms can also be predicted for existing and new adsorbate-adsorbent systems with the MEA. The results show that MEA has the potential of becoming a standard characterization method for microporous solids that will lead to an increased understanding of their behavior in gas

  16. Ground performance of air conditioning and water recycle system for a space plant box

    NASA Astrophysics Data System (ADS)

    Tani, A.; Okuma, T.; Goto, E.; Kitaya, Y.; Saito, T.; Takahashi, H.

    Researchers from 5 Japanese universities have developed a plant growth facility (Space Plant Box) for seed to seed experiments under microgravity. The breadboard model of the Space Plant Box was fabricated by assembling subsystems developed for microgravity. The subsystems include air conditioning and water recycle system, air circulation system, water and nutrient delivery system, lighting system and plant monitoring system. The air conditioning and water recycle system is simply composed of a single heat exchanger, two fans and hydrophilic fibrous strings. The strings allow water movement from the cooler fin in the Cooling Box to root supporting materials in the Plant Growth Chamber driven by water potential deficit. Relative humidity in the Plant Growth Chamber can be changed over a wide range by controlling the ratio of latent heat exchange to sensible heat exchange on the cooling fin of the heat exchanger. The transpiration rate was successfully measured by circulating air inside the Plant Growth Chamber only. Most water was recycled and a small amount of water needed to be added from the outside. The simple, air conditioning and water recycle system for the Space Plant Box showed good performance through a barley ( Hordeum vulgare L.) growth experiment.

  17. Ground performance of air conditioning and water recycle system for a Space Plant Box.

    PubMed

    Tani, A; Okuma, T; Goto, E; Kitaya, Y; Saito, T; Takahashi, H

    2001-01-01

    Researchers from 5 Japanese universities have developed a plant growth facility (Space Plant Box) for seed to seed experiments under microgravity. The breadboard model of the Space Plant Box was fabricated by assembling subsystems developed for microgravity. The subsystems include air conditioning and water recycle system, air circulation system, water and nutrient delivery system, lighting system and plant monitoring system. The air conditioning and water recycle system is simply composed of a single heat exchanger, two fans and hydrophilic fibrous strings. The strings allow water movement from the cooler fin in the Cooling Box to root supporting materials in the Plant Growth Chamber driven by water potential deficit. Relative humidity in the Plant Growth Chamber can be changed over a wide range by controlling the ratio of latent heat exchange to sensible heat exchange on the cooling fin of the heat exchanger. The transpiration rate was successfully measured by circulating air inside the Plant Growth Chamber only. Most water was recycled and a small amount of water needed to be added from the outside. The simple, air conditioning and water recycle system for the Space Plant Box showed good performance through a barley (Hordeum vulgare L.) growth experiment.

  18. Triple Recycling Processes Impact Systemic and Local Bioavailability of Orally Administered Flavonoids.

    PubMed

    Dai, Peimin; Zhu, Lijun; Luo, Feifei; Lu, Linlin; Li, Qiang; Wang, Liping; Wang, Ying; Wang, Xinchun; Hu, Ming; Liu, Zhongqiu

    2015-05-01

    Triple recycling (i.e., enterohepatic, enteric and local recycling) plays a central role in governing the disposition of phenolics such as flavonoids, resulting in low systemic bioavailability but higher gut bioavailability and longer than expected apparent half-life. The present study aims to investigate the coexistence of these recycling schemes using model bioactive flavonoid tilianin and a four-site perfused rat intestinal model in the presence or absence of a lactase phlorizin hydrolase (LPH) inhibitor gluconolactone and/or a glucuronidase inhibitor saccharolactone. The result showed that tilianin could be metabolized into tilianin glucuronide, acacetin, and acacetin glucuronide, which are excreted into the bile and luminal perfusate (highest in the duodenum and lowest in the colon). Gluconolactone (20 mM) significantly reduced the absorption of tilianin and the enteric and biliary excretion of acacetin glucuronide. Saccharolactone (0.1 mM) alone or in combination of gluconolactone also remarkably reduced the biliary and intestinal excretion of acacetin glucuronide. Acacetin glucuronides from bile or perfusate were rapidly hydrolyzed by bacterial β-glucuronidases to acacetin, enabling enterohepatic and enteric recycling. Moreover, saccharolactone-sensitive tilianin disposition and glucuronide deconjugation, which was more active in the small intestine than the colon, points to the small intestinal origin of the deconjugation enzyme and supports the presence of local recycling scheme. In conclusion, our studies have demonstrated triple recycling of a bioactive phenolic (i.e., a model flavonoid), and this recycling may have an impact on the site and duration of polyphenols pharmacokinetics in vivo.

  19. A fiber optics system for monitoring utilization of ZnO adsorbent beds during desulfurization for logistic fuel cell applications

    NASA Astrophysics Data System (ADS)

    Sujan, Achintya; Yang, Hongyun; Dimick, Paul; Tatarchuk, Bruce J.

    2016-05-01

    An in-situ fiber optic based technique for direct measurement of capacity utilization of ZnO adsorbent beds by monitoring bed color changes during desulfurization for fuel cell systems is presented. Adsorbents composed of bulk metal oxides (ZnO) and supported metal oxides (ZnO/SiO2 and Cusbnd ZnO/SiO2) for H2S removal at 22 °C are examined. Adsorbent bed utilization at breakthrough is determined by the optical sensor as the maximum derivative of area under UV-vis spectrum from 250 to 800 nm observed as a function of service time. Since the response time of the sensor due to bed color change is close to bed breakthrough time, a series of probes along the bed predicts utilization of the portion of bed prior to H2S breakthrough. The efficacy of the optical sensor is evaluated as a function of inlet H2S concentration, H2S flow rate and desulfurization in presence of CO, CO2 and moisture in feed. A 6 mm optical probe is employed to measure utilization of a 3/16 inch ZnO extrudate bed for H2S removal. It is envisioned that with the application of the optical sensor, desulfurization can be carried out at high adsorbent utilization and low operational costs during on-board miniaturized fuel processing for logistic fuel cell power systems.

  20. Differential analysis of "protein corona" profile adsorbed onto different nonviral gene delivery systems.

    PubMed

    Capriotti, Anna Laura; Caracciolo, Giulio; Caruso, Giuseppe; Foglia, Patrizia; Pozzi, Daniela; Samperi, Roberto; Laganà, Aldo

    2011-12-15

    A shotgun proteomics approach was used to characterize and compare the proteins that lead to the formation of a rich "protein corona" adsorbed onto the surfaces of cationic liposomes (CLs), lipoplexes, and lipid/polycation/DNA (LPD) complexes, when they come into contact with plasma. After separation of the nanoparticle-protein complex from plasma, the protein mixture was digested, and peptides were analyzed by nanoliquid chromatography-Orbitrap LTQ-XL mass spectrometry. The number of proteins bound to lipoplexes was double that of those identified in the corona of CLs (208 vs 105), while 77 proteins were common to both coronas. The number of proteins bound to the surface of the LPD complexes (158, 133 of which are common to lipoplexes) is intermediate between those found in the protein corona of both CLs and lipoplexes. About half of them were found in the protein corona of CLs. By overlapping the three formulations, it can be seen that only 12 proteins are peculiar to LPD complexes. These results may help in designing gene delivery systems capable of binding the minimum possible quantity of proteins that influence transfection negatively, binding selectively proteins capable of helping in steering in vivo the vector toward the target, and obtaining more efficient and effective gene therapy.

  1. Meta-analysis of survival with the molecular adsorbent recirculating system for liver failure

    PubMed Central

    He, Guo-Lin; Feng, Lei; Duan, Chong-Yang; Hu, Xiang; Zhou, Chen-Jie; Cheng, Yuan; Pan, Ming-Xin; Gao, Yi

    2015-01-01

    This study aims to assess the treatment effects of the molecular adsorbent recirculating system (MARS) in patients with acute and acute-on-chronic liver failure. We searched MEDLINE, EMBASE, and the Cochrane Controlled Trials Registry database between January 1966 and January 2014. We included randomized controlled trials, which compared the treatment effects of MARS with standard medical treatment. Study quality assessed according to Consolidated Standards of Reporting Trials (CONSORT) criteria. The risk ratio was used as the effect-size measure according to a fixed-effects model. The search strategy revealed 72 clinical studies, 10 of which were randomized controlled trials that met the criteria and were included. Four addressed ALF (93 patients) and six addressed AOCLF (453 patients). The mean CONSORT score was 15 (range 10-20). By meta-analysis, MARS significantly improved survival in ALF (risk ratio 0.61; 95% CI 0.38, 0.97; P = 0.04). There was no significant survival benefit in AOCLF (risk ratio 0.88; 95% CI 0.74, 1.06; P = 0.16). MARS significantly improved survival in patients with acute liver failure, however, there is no evidence that it improved survival in patients with acute-on-chronic liver failure. In conclusion, the present meta-analysis indicates that MARS therapy can improve survival in patients with ALF. It is necessary to develop MARS treatment because of the increasing demand for liver transplantation and the risk of liver failure. PMID:26770295

  2. Extracorporeal Elimination of Piperacillin/Tazobactam during Molecular Adsorbent Recirculating System Therapy.

    PubMed

    Personett, Heather A; Larson, Scott L; Frazee, Erin N; Nyberg, Scott L; El-Zoghby, Ziad M

    2015-08-01

    Use of the Molecular Adsorbent Recirculating System (MARS) as a liver support device continues to grow worldwide. Various components of the MARS circuit remove both protein-bound and water-soluble molecules. Little is known about the extent of the enhanced clearance mechanisms used in MARS therapy on drug elimination. Of particular interest to acute care practitioners is the impact of MARS on antibiotic clearance, as suboptimal concentrations of such drugs can negatively impact patient outcomes. The properties of piperacillin/tazobactam suggest that elimination may be enhanced in the setting of MARS therapy. We describe two cases in which this was studied. Piperacillin concentrations were determined at various points within the MARS circuit, and patient serum concentrations were reported throughout the dosing interval while receiving MARS therapy. Piperacillin concentrations in both cases were in excess of the desired goal minimum inhibitory concentrations for treatment of gram-negative infections. Use of an extended-infusion strategy of piperacillin/tazobactam 3.375 or 4.5 g given every 8 hours maintained desired serum levels throughout the dosing interval. To our knowledge, this is the second published report on the use of piperacillin/tazobactam during MARS therapy. These case reports reveal successful dosing strategies for patients requiring piperacillin/tazobactam while receiving MARS therapy, as well as quantify the influence of individual MARS elements on drug extraction. PMID:26289310

  3. Simulation of cutting process in the cable recycling system

    NASA Astrophysics Data System (ADS)

    Li, Yang; Luo, Zhen; Song, Kailei; Ao, Sansan; Wang, Rui

    2011-05-01

    The utilization of Waste Electrical and Electronic Equipment is a hot spot in environmental protection field presently and the resource utilization of cable wastes is an important subject. An enormous amount of electrical cable is disposed of as scrap each year. In order to recycle the valuable copper wires, cable granulator technique is used widely. However, one of the shortcomings of this technique is it has serious tool wear. In order to better understand the reason for tool wear, this paper simulates the stress and strain distribution in the cutting tool and copper during the cutting process in cable granulator by finite element method. The result shows that a tensile stress region, which is the main reason for blade tipping, appeared in the upper blade. Besides, the tensile stress in the right side of upper blade is higher than that in the left side. Therefore, in order to extend the life of cutter, we suggest using different materials in different stress zone to manufacture cutting tool. After the cutter was worn out, the right side of the blade can be renovated using material with well tensile performance through overlaying welding, as well as the left side of the blade can be renovated by material with high red hardness, high wear resistance, and high compression strength through overlaying welding. This method can reduce the consumption of precious metals and raise the utilization rate of materials.

  4. Simulation of cutting process in the cable recycling system

    NASA Astrophysics Data System (ADS)

    Li, Yang; Luo, Zhen; Song, Kailei; Ao, Sansan; Wang, Rui

    2010-12-01

    The utilization of Waste Electrical and Electronic Equipment is a hot spot in environmental protection field presently and the resource utilization of cable wastes is an important subject. An enormous amount of electrical cable is disposed of as scrap each year. In order to recycle the valuable copper wires, cable granulator technique is used widely. However, one of the shortcomings of this technique is it has serious tool wear. In order to better understand the reason for tool wear, this paper simulates the stress and strain distribution in the cutting tool and copper during the cutting process in cable granulator by finite element method. The result shows that a tensile stress region, which is the main reason for blade tipping, appeared in the upper blade. Besides, the tensile stress in the right side of upper blade is higher than that in the left side. Therefore, in order to extend the life of cutter, we suggest using different materials in different stress zone to manufacture cutting tool. After the cutter was worn out, the right side of the blade can be renovated using material with well tensile performance through overlaying welding, as well as the left side of the blade can be renovated by material with high red hardness, high wear resistance, and high compression strength through overlaying welding. This method can reduce the consumption of precious metals and raise the utilization rate of materials.

  5. Cost-Based Optimization of a Papermaking Wastewater Regeneration Recycling System

    NASA Astrophysics Data System (ADS)

    Huang, Long; Feng, Xiao; Chu, Khim H.

    2010-11-01

    Wastewater can be regenerated for recycling in an industrial process to reduce freshwater consumption and wastewater discharge. Such an environment friendly approach will also lead to cost savings that accrue due to reduced freshwater usage and wastewater discharge. However, the resulting cost savings are offset to varying degrees by the costs incurred for the regeneration of wastewater for recycling. Therefore, systematic procedures should be used to determine the true economic benefits for any water-using system involving wastewater regeneration recycling. In this paper, a total cost accounting procedure is employed to construct a comprehensive cost model for a paper mill. The resulting cost model is optimized by means of mathematical programming to determine the optimal regeneration flowrate and regeneration efficiency that will yield the minimum total cost.

  6. Introduction and feasibility assessment of laundry use of recycled water in dual reticulation systems in Australia.

    PubMed

    Mainali, Bandita; Pham, Thi Thu Nga; Ngo, Huu Hao; Guo, Wenshan; Listowski, Andrzej; O'Halloran, Kelly; Miechel, Clayton; Muthukaruppan, Muthu; Johnston, Rosemary

    2014-02-01

    Laundry is a potential new end use of recycled water in dual reticulation systems. Generally, the community is willing to accept this new end use if it can meet the concerns on health issues, durability of washing machine, cloth quality and aesthetic appearance. This study addresses all these major concerns thereby assisting in the introduction and promotion of this new end use in the existing and proposed dual reticulation systems. Five representative cloth materials were selected for washing in tap water and in recycled water for up to 50 wash cycles for comparative studies. The tearing/tensile strength tests were used for the assessment of cloth durability. ANOVA one way test was applied for the significance analysis (Tukey's test p<0.05) which indicated that there is no significant change in the tensile/tearing strengths of washed cloth samples. Scanning electron microscope (SEM) images of the washed cloth samples found no distinct change in surface morphology. Textile colour analysis (CIEDE2000) analysed the variation in colour of the washed cloth samples and showed that the change in colour ∆E ranges from 0-1 revealing no visible difference in colour of cloth samples. Langelier Saturation Index (LSI) was used as the indicator for predicting corrosive/scaling potential of recycled water. The LSI values ranged from +0.5 to -0.5, indicating no corrosive or scaling potential of recycled water. The microbiological study of the cloth samples washed in recycled water indicated that there was no contamination with representative bacteria. As the recycled water has similar effects like tap water on cloth and washing machine, it is safe to use for laundry.

  7. Diversity of free-living amoebae in a dual distribution (potable and recycled) water system

    EPA Science Inventory

    Free-living amoebae are known to facilitate the growth of water associated pathogens. This study, for the first time, explored the diversity of free-living amoebae in a dual distribution (potable and recycled) water system in Rouse Hill NSW, Australia. Water and biofilm samples w...

  8. The recycle of water and nitrogen from urine in bioregenerative life support system

    NASA Astrophysics Data System (ADS)

    Deng, Shengda; Xie, Beizhen; Liu, Hong

    2016-06-01

    The recycle of the wastewater is one of the main factors for realizing a higher closure degree of bioregenerative life support system (BLSS), among which the treatment and recovery of the crew's urine are the most difficult and critical issues. Researchers have paid a lot of attention on the desalination of urine in the previous studies, however, if the nitrogen could be recycled simultaneously while desalting the urine, the substance circulation and the closure of BLSS could be improved more significantly. In this study, two-step method was conducted to treat the urine and recycle the water and nitrogen. The urine was hydrolyzed firstly, and then the water vapor and ammonia gas were cooled and collected by using reduced pressure distillation in alkaline condition. High temperature acidification method (HTAM) and immobilized urease catalysis method (IUCM) were investigated in the hydrolysis pretreatment of urine. The treatment conditions of both methods were optimized and the hydrolysis efficiencies were compared. The results showed that the optimum treatment temperature and acidity for HTAM were 99 °C and [H+] =2 mol/L when the reaction time was 7 h, and the maximum nitrogen recycle efficiency was 39.7%. While, the optimum treatment conditions for IUCM were 60 °C, pH=7.0 and 40 min, and the maximum nitrogen recycle efficiency could reach 52.2%. Therefore, compared with HTAM, IUCM has higher hydrolysis efficiency with milder reaction temperature and pH and shorter reaction time which means it could adapt to the heavy urine treatment workload in BLSS. This investigation has provided a promising method to recycle the urine in BLSS, and all the results will contribute to the further BLSS experiments conducted in the stage II of the "Lunar Palace 1".

  9. Evaluation of gaseous fluorocarbon adsorption isotherms on porous adsorbents under high pressure

    SciTech Connect

    Kaliappan, S.; Furuya, E.G.; Noll, K.E.; Chang, H.T.; Wang, H.C.

    1996-11-01

    In this study data have been collected to aid in the design of a control system that will remove fluorocarbons by adsorbing onto porous adsorbents. A bench scale experimental adsorption system had been designed using high accuracy MKS pressure transducers of 10,000 torr (two nos.) and a 100 torr connected to digital readout units. Tetrafluoromethane (CF{sub 4}) one of the fluorinated carbon family has been selected to evaluate the adsorption characteristics on porous adsorbents. The CF{sub 4} was charged to a sample reservoir in the test system at 200 psig pressure and at 22 C was allowed into an adsorption chamber at small increment of pressure rise. The pressure drop, using a Valydine PS 309 differential pressure gauge from the sample reservoir and the pressure buildup in the adsorption chamber were measured and the amount of CF{sub 4} adsorbed onto the adsorbents was calculated using ideal gas law. Various adsorbents, molecular sieve 13X, Silicagel (14 x 20), Beads Activated Carbon, Granular Activated Carbons PCB 6 x 16, BPL 4 x 10, F300, and F400 had been studied. It has been found that GAC-PCB 6 x 16 has the highest adsorbing capacity of 0.51 gm/gm at the conditions established. GAC-F300 had the second highest adsorbing capacity of 0.413 gm/gm, among all the adsorbents tested. The isotherms were analyzed using several equations employing both two parameters and three parameters. The relationship between the constants and physical properties of adsorbent solids and adsorbate molecules is discussed. The result of this study will be utilized to design a pressure swing fluorocarbon adsorption system that can be economically (using recycle of the collected fluorocarbons) applied to fluorocarbon removal in the electronic industry.

  10. Molecular Adsorber Coating

    NASA Technical Reports Server (NTRS)

    Straka, Sharon; Peters, Wanda; Hasegawa, Mark; Hedgeland, Randy; Petro, John; Novo-Gradac, Kevin; Wong, Alfred; Triolo, Jack; Miller, Cory

    2011-01-01

    A document discusses a zeolite-based sprayable molecular adsorber coating that has been developed to alleviate the size and weight issues of current ceramic puck-based technology, while providing a configuration that more projects can use to protect against degradation from outgassed materials within a spacecraft, particularly contamination-sensitive instruments. This coating system demonstrates five times the adsorption capacity of previously developed adsorber coating slurries. The molecular adsorber formulation was developed and refined, and a procedure for spray application was developed. Samples were spray-coated and tested for capacity, thermal optical/radiative properties, coating adhesion, and thermal cycling. Work performed during this study indicates that the molecular adsorber formulation can be applied to aluminum, stainless steel, or other metal substrates that can accept silicate-based coatings. The coating can also function as a thermal- control coating. This adsorber will dramatically reduce the mass and volume restrictions, and is less expensive than the currently used molecular adsorber puck design.

  11. Influence of system size on the properties of a fluid adsorbed in a nanopore: Physical manifestations and methodological consequences.

    PubMed

    Puibasset, Joël; Kierlik, Edouard; Tarjus, Gilles

    2014-07-28

    Hysteresis and discontinuities in the isotherms of a fluid adsorbed in a nanopore in general hamper the determination of equilibrium thermodynamic properties, even in computer simulations. A way around this has been to consider both a reservoir of small size and a pore of small extent in order to restrict the fluctuations of density and approach a classical van der Waals loop. We assess this suggestion by thoroughly studying through Monte Carlo simulations and density functional theory the influence of system size on the equilibrium configurations of the adsorbed fluid and on the resulting isotherms. We stress the importance of pore-symmetry-breaking states that even for modest pore sizes lead to discontinuous isotherms and we discuss the physical relevance of these states and the methodological consequences for computing thermodynamic quantities.

  12. Influence of system size on the properties of a fluid adsorbed in a nanopore: Physical manifestations and methodological consequences

    SciTech Connect

    Puibasset, Joël; Kierlik, Edouard Tarjus, Gilles

    2014-07-28

    Hysteresis and discontinuities in the isotherms of a fluid adsorbed in a nanopore in general hamper the determination of equilibrium thermodynamic properties, even in computer simulations. A way around this has been to consider both a reservoir of small size and a pore of small extent in order to restrict the fluctuations of density and approach a classical van der Waals loop. We assess this suggestion by thoroughly studying through Monte Carlo simulations and density functional theory the influence of system size on the equilibrium configurations of the adsorbed fluid and on the resulting isotherms. We stress the importance of pore-symmetry-breaking states that even for modest pore sizes lead to discontinuous isotherms and we discuss the physical relevance of these states and the methodological consequences for computing thermodynamic quantities.

  13. Regenerative adsorbent heat pump

    NASA Technical Reports Server (NTRS)

    Jones, Jack A. (Inventor)

    1991-01-01

    A regenerative adsorbent heat pump process and system is provided which can regenerate a high percentage of the sensible heat of the system and at least a portion of the heat of adsorption. A series of at least four compressors containing an adsorbent is provided. A large amount of heat is transferred from compressor to compressor so that heat is regenerated. The process and system are useful for air conditioning rooms, providing room heat in the winter or for hot water heating throughout the year, and, in general, for pumping heat from a lower temperature to a higher temperature.

  14. Inversion of type of separation system in planar chromatography of peptides, using C18 silica-based adsorbents.

    PubMed

    Gwarda, Radosław Ł; Aletańska-Kozak, Monika; Matosiuk, Dariusz; Dzido, Tadeusz H

    2016-04-01

    Our previous results show, that C18 silica-based adsorbents used in high-performance thin-layer chromatography (HPTLC), provide complex retention mechanism basing on various polar and nonpolar interactions. Here we present, that in chromatography of peptides, due to mixed-mode properties of these adsorbents, there is a simple way to obtain inversion of separation system type (from reversed-phase, RP, to normal-phase, NP, and vice versa). The results presented provide detailed information how to obtain inversion mentioned and reflect the extent (the type and concentration of organic solvent, the type and concentration of ion-pairing reagent in the mobile phase) of this phenomenon. We show, that the system type inversion results in significant change of selectivity of separation, which may be especially useful in 2D separation of complex samples of basic/amphoteric compounds such as peptides. This results from the fact, that C18 silica-based HPTLC adsorbents, may be used in hydrophilic interaction chromatography (HILIC) or RP chromatography, in dependence on mobile phase composition.

  15. Model-Based Diagnosis and Prognosis of a Water Recycling System

    NASA Technical Reports Server (NTRS)

    Roychoudhury, Indranil; Hafiychuk, Vasyl; Goebel, Kai Frank

    2013-01-01

    A water recycling system (WRS) deployed at NASA Ames Research Center s Sustainability Base (an energy efficient office building that integrates some novel technologies developed for space applications) will serve as a testbed for long duration testing of next generation spacecraft water recycling systems for future human spaceflight missions. This system cleans graywater (waste water collected from sinks and showers) and recycles it into clean water. Like all engineered systems, the WRS is prone to standard degradation due to regular use, as well as other faults. Diagnostic and prognostic applications will be deployed on the WRS to ensure its safe, efficient, and correct operation. The diagnostic and prognostic results can be used to enable condition-based maintenance to avoid unplanned outages, and perhaps extend the useful life of the WRS. Diagnosis involves detecting when a fault occurs, isolating the root cause of the fault, and identifying the extent of damage. Prognosis involves predicting when the system will reach its end of life irrespective of whether an abnormal condition is present or not. In this paper, first, we develop a physics model of both nominal and faulty system behavior of the WRS. Then, we apply an integrated model-based diagnosis and prognosis framework to the simulation model of the WRS for several different fault scenarios to detect, isolate, and identify faults, and predict the end of life in each fault scenario, and present the experimental results.

  16. Ion-exchange chromatography separation applied to mineral recycle in closed systems

    NASA Technical Reports Server (NTRS)

    Ballou, E.; Spitze, L. A.; Wong, F. W.; Wydeven, T.; Johnson, C. C.

    1981-01-01

    As part of the controlled ecological life support system (CELSS) program, a study is being made of mineral separation on ion-exchange columns. The purpose of the mineral separation step is to allow minerals to be recycled from the oxidized waste products of plants, man, and animals for hydroponic food production. In the CELSS application, relatively large quantities of minerals in a broad concentration range must be recovered by the desired system, rather than the trace quantities and very low concentrations treated in analytical applications of ion-exchange chromatography. Experiments have been carried out to assess the parameters pertinent to the scale-up of ion-exchange chromatography and to determine feasibility. Preliminary conclusions are that the column scale-up is in a reasonable size range for the CELSS application. The recycling of a suitable eluent, however, remains a major challenge to the suitability of using ion exchange chromatography in closed systems.

  17. A model for simulating the grinding and classification cyclic system of waste PCBs recycling production line.

    PubMed

    Yang, Deming; Xu, Zhenming

    2011-09-15

    Crushing and separating technology is widely used in waste printed circuit boards (PCBs) recycling process. A set of automatic line without negative impact to environment for recycling waste PCBs was applied in industry scale. Crushed waste PCBs particles grinding and classification cyclic system is the most important part of the automatic production line, and it decides the efficiency of the whole production line. In this paper, a model for computing the process of the system was established, and matrix analysis method was adopted. The result showed that good agreement can be achieved between the simulation model and the actual production line, and the system is anti-jamming. This model possibly provides a basis for the automatic process control of waste PCBs production line. With this model, many engineering problems can be reduced, such as metals and nonmetals insufficient dissociation, particles over-pulverizing, incomplete comminuting, material plugging and equipment fever.

  18. The As-Cu-Ni System: A Chemical Thermodynamic Model for Ancient Recycling

    NASA Astrophysics Data System (ADS)

    Sabatini, Benjamin J.

    2015-12-01

    This article is the first thermodynamically reasoned ancient metal system assessment intended for use by archaeologists and archaeometallurgists to aid in the interpretation of remelted/recycled copper alloys composed of arsenic and copper, and arsenic, copper, and nickel. These models are meant to fulfill two main purposes: first, to be applied toward the identification of progressive and regressive temporal changes in artifact chemistry that would have occurred due to recycling, and second, to provide thermodynamic insight into why such metal combinations existed in antiquity. Built on well-established thermodynamics, these models were created using a combination of custom-written software and published binary thermodynamic systems data adjusted to within the boundary conditions of 1200°C and 1 atm. Using these parameters, the behavior of each element and their likelihood of loss in the binaries As-Cu, As-Ni, Cu-Ni, and ternary As-Cu-Ni, systems, under assumed ancient furnace conditions, was determined.

  19. A model for simulating the grinding and classification cyclic system of waste PCBs recycling production line.

    PubMed

    Yang, Deming; Xu, Zhenming

    2011-09-15

    Crushing and separating technology is widely used in waste printed circuit boards (PCBs) recycling process. A set of automatic line without negative impact to environment for recycling waste PCBs was applied in industry scale. Crushed waste PCBs particles grinding and classification cyclic system is the most important part of the automatic production line, and it decides the efficiency of the whole production line. In this paper, a model for computing the process of the system was established, and matrix analysis method was adopted. The result showed that good agreement can be achieved between the simulation model and the actual production line, and the system is anti-jamming. This model possibly provides a basis for the automatic process control of waste PCBs production line. With this model, many engineering problems can be reduced, such as metals and nonmetals insufficient dissociation, particles over-pulverizing, incomplete comminuting, material plugging and equipment fever. PMID:21764511

  20. Aquaculture of Uranium in Seawater by a Fabric-Adsorbent Submerged System

    SciTech Connect

    Seko, Noriaki; Katakai, Akio; Hasegawa, Shin; Tamada, Masao; Kasai, Noboru; Takeda, Hayato; Sugo, Takanobu; Saito, Kyoichi

    2003-11-15

    The total amount of uranium dissolved in seawater at a uniform concentration of 3 mg U/m{sup 3} in the world's oceans is 4.5 billion tons. An adsorption method using polymeric adsorbents capable of specifically recovering uranium from seawater is reported to be economically feasible. A uranium-specific nonwoven fabric was used as the adsorbent packed in an adsorption cage 16 m{sup 2} in cross-sectional area and 16 cm in height. We submerged three adsorption cages in the Pacific Ocean at a depth of 20 m at 7 km offshore of Japan. The three adsorption cages consisted of stacks of 52 000 sheets of the uranium-specific non-woven fabric with a total mass of 350 kg. The total amount of uranium recovered by the nonwoven fabric was >1 kg in terms of yellow cake during a total submersion time of 240 days in the ocean.

  1. Air stripper VOC treatment using specialized adsorbents

    SciTech Connect

    Craven, C.N.; Blystone, P.G.; Grant, A.

    1994-12-31

    Abatement of volatile organic compound (VOC) emissions is required by federal, state and local regulatory agencies. Sources of VOC emissions include air stripping processes at groundwater remediation and industrial wastewater operations. The Purus A2000 system is an innovative emission control system that utilizes specialized adsorbent resins, on-site regeneration and solvent recovery for abatement of VOCs. This paper describes two applications in which air stripper off-gas is treated by the Purus A2000 Adsorption System. The first is a groundwater remediation pump-and-treat operation in which the air stripper off-gas contains chlorinated solvents. At the second site, benzene and styrene emissions from an industrial wastewater air stripper operation were successfully treated. At both sites the recovered solvent was recycled. Capital and operating costs will be compared to other treatment methods.

  2. Tire Recycling

    NASA Technical Reports Server (NTRS)

    1997-01-01

    Cryopolymers, Inc. tapped NASA expertise to improve a process for recycling vehicle tires by converting shredded rubber into products that can be used in asphalt road beds, new tires, hoses, and other products. In conjunction with the Southern Technology Applications Center and Stennis Space Center, NASA expertise in cryogenic fuel-handling needed for launch vehicle and spacecraft operations was called upon to improve the recycling concept. Stennis advised Cryopolymers on the type of equipment required, as well as steps to reduce the amount of liquid nitrogen used in the process. They also guided the company to use more efficient ways to control system hardware. It is estimated that more than 300 million tires nationwide are produced per year. Cryopolymers expects to reach a production rate of 5,000 tires recycled per day.

  3. Asphalt recycle plant and method

    SciTech Connect

    Brashears, D. F.; Butler, T. G.; Elliott, E. J.

    1984-10-16

    An asphalt recycling system and process are incorporated into an existing batch type asphalt plant. The existing asphalt plant has an aggregate dryer and air discharge ducts connected to a filtering system. A recycling dryer has input ducts connected to the existing aggregate dryer discharge ducts and output ducts connected from the recycling dryer back to the existing ducts to the filtering system. A recycle feeder bin for feeding reclaimed asphalt pavement to the recycle dryer is connected to the recycle dryer. A recycle booster burner is operatively connected to the recycle dryer through the input duct to the dryer for providing additional heat to the recycle dryer so that the waste heat from the existing aggregate dryer and the booster burner provide a predetermined heat to the recycle dryer for heating the asphalt material. A recycling storage bin or silo is connected to receive the heated recycled asphalt from the recycle dryer. A hammermill or other means may be provided for breaking up the old asphaltic materials, such as old paving materials prior to entry of the material into the recycle dryer. Dampers are provided for directing heated gases from the existing batch type asphalt plant to the recycling system, as needed, and temperature controls are utilized to control the recycled booster burner to provide the right combination of existing waste and added heat for the recycled dryer. The stored recycled asphalt materials may be fed to an existing plant batching tower for batching and loading into vehicles.

  4. Investigation of factors affecting asphalt pavement recycling and asphalt compatibility

    SciTech Connect

    Venable, R.L.; Petersen, J.C.; Robertson, R.E.; Plancher, H.

    1983-03-01

    Both economic and environmental factors dictate that asphalt pavement be recycled. Many recycling projects have been completed using a variety of recycling additives, but little work has been done on the physiochemical aspects of pavement recycling. The present exploratory study was undertaken to better define the physiochemical variables of recycling. Objectives of the present study include: (1) to determine if molecular structuring in the asphalt binder could be observed in oxidized (air-aged) asphalt-aggregate briquets, and if so, how was structuring affected during briquits, and if so, how was structuring affected during briquet recycling and (2) to determine if recycling agents penetrate the strongly adsorbed asphalt layer on the aggregate surface. Differences were seen in asphalt component compatibility as judged by the state of peptization parameters. In extreme cases the values of the parameters correlated with properties of asphalts of known compatibility; however, a relationship between the parameters determined on a series of asphalts in pavements was not established. The parameters might be useful in evaluating additives for pavement recycling; however, more systems need to be studied to fully assess their potential usefulness. Finally, the parameters need to be correlated with performance-related measurements such as asphalt rheological and mix properties. Examination of the parameters and their changes on asphalt oxidative aging may also be informative with regard to asphalt durability inasmuch as oxidation-induced changes are a major cause of asphalt pavement failure.

  5. Impacts of residence time during storage on potential of water saving for grey water recycling system.

    PubMed

    Liu, S; Butler, D; Memon, F A; Makropoulos, C; Avery, L; Jefferson, B

    2010-01-01

    Grey water recycling has been generally accepted and is about to move into practice in terms of sustainable development. Previous research has revealed the bacteria re-growth in grey water and reclaimed municipal water during storage. However, in most present grey water recycling practices, impacts of water quality changes during storage on the system's performance and design regulation have not been addressed. In this paper, performance of a constructed wetland based grey water recycling system was analysed by taking the constraint of residence time during storage into account using an object based household water cycle model. Two indicators, water saving efficiency (WSE) and residence time index (RTI), are employed to reflect the system's performance and residence time during storage respectively. Results show that WSE and RTI change with storage tank volumes oppositely. As both high WSE and RTI cannot be achieved simultaneously, it is concluded that in order to achieve the most cost-effective and safe solution, systems with both small grey and green tanks are needed, whilst accepting that only relatively modest water saving efficiency targets can be achieved. Higher efficiencies will only be practicable if water quality deterioration in the green water tank can be prevented by some means (e.g. disinfection).

  6. Life cycle assessment of a packaging waste recycling system in Portugal

    SciTech Connect

    Ferreira, S.; Cabral, M.; Cruz, N.F. da; Simões, P.; Marques, R.C.

    2014-09-15

    Highlights: • We modeled a real packaging waste recycling system. • The analysis was performed using the life cycle assessment methodology. • The 2010 situation was compared with scenarios where the materials were not recycled. • The “Baseline” scenario seems to be more beneficial to the environment. - Abstract: Life Cycle Assessment (LCA) has been used to assess the environmental impacts associated with an activity or product life cycle. It has also been applied to assess the environmental performance related to waste management activities. This study analyses the packaging waste management system of a local public authority in Portugal. The operations of selective and refuse collection, sorting, recycling, landfilling and incineration of packaging waste were considered. The packaging waste management system in operation in 2010, which we called “Baseline” scenario, was compared with two hypothetical scenarios where all the packaging waste that was selectively collected in 2010 would undergo the refuse collection system and would be sent directly to incineration (called “Incineration” scenario) or to landfill (“Landfill” scenario). Overall, the results show that the “Baseline” scenario is more environmentally sound than the hypothetical scenarios.

  7. Modern biofuel cells for waste recycling in life support systems

    NASA Technical Reports Server (NTRS)

    Chen, L.; Bockris, J. OM.

    1989-01-01

    Innovative ways of treating urea in waste water reprocessing for long duration space exploration are being considered. Urea is very stable and therefore there are few effective ways for its decomposition. The feasibility of the use of the enzyme urease is to catalyze the hydrolysis of urea to ammonia and carbon dioxide is discussed, including a methodology, potential problems, the capabilities and advantages of such a system.

  8. Modern biofuel cells for waste recycling in life support systems

    NASA Astrophysics Data System (ADS)

    Chen, L.; Bockris, J. Om.

    1989-09-01

    Innovative ways of treating urea in waste water reprocessing for long duration space exploration are being considered. Urea is very stable and therefore there are few effective ways for its decomposition. The feasibility of the use of the enzyme urease is to catalyze the hydrolysis of urea to ammonia and carbon dioxide is discussed, including a methodology, potential problems, the capabilities and advantages of such a system.

  9. Advanced Recyclable Media System{reg_sign}. Innovative technology summary report

    SciTech Connect

    1998-12-01

    The objective of the Large-Scale Demonstration Project (LSDP) is to select and demonstrate potentially beneficial technologies at the Argonne National Laboratory East`s (ANL) Chicago Pile-5 (CP-5) Research Reactor. The purpose of the LSDP is to demonstrate that using innovative and improved deactivation and decommissioning (D and D) technologies from various sources can result in significant benefits, such as decreased cost and increased health and safety, as compared with baseline D and D technologies. This report describes a demonstration of the Advanced Recyclable Media System{reg_sign} technology which was employed by Surface Technology Systems, Inc. to remove coatings from a concrete floor. This demonstration is part of the CP-5 LSDP sponsored by the US Department of Energy (DOE) Office of Science and Technology Deactivation and Decommissioning Focus Area (DDFA). The Advanced Recyclable Media System{reg_sign} (ARMS) technology is an open blast technology which uses a soft recyclable media. The patented ARMS Engineered Blast Media consists of a fiber-reinforced polymer matrix which can be manufactured in various grades of abrasiveness. The fiber media can be remade and/or reused up to 20 times and can clean almost any surface (e.g., metal, wood, concrete, lead) and geometry including corners and the inside of air ducts.

  10. Biomass recycle as a means to improve the energy efficiency of CELSS algal culture systems

    NASA Astrophysics Data System (ADS)

    Radmer, R.; Cox, J.; Lieberman, D.; Behrens, P.; Arnett, K.

    Algal cultures can be very rapid and efficient means to generate biomass and regenerate the atmosphere for closed environmental life support systems. However, as in the case of most higher plants, a significant fraction of the biomass produced by most algae cannot be directly converted to a useful food product by standard food technology procedures. This waste biomass will serve as an energy drain on the overall system unless it can be efficiently recycled without a significant loss of its energy content. We report experiments in which cultures of the algae Scenedesmus obliquus were grown in the light and at the expense of an added carbon source, which either replaced or supplemented the actinic light. As part of these experiments we tested hydrolyzed waste biomass from these same algae to determine whether the algae themselves could be made part of the biological recycling process. Results indicate that hydrolyzed algal (and plant) biomass can serve as carbon and energy sources for the growth of these algae, suggesting that the efficiency of the closed system could be significantly improved using this recycling process.

  11. Biomass recycle as a means to improve the energy efficiency of CELSS algal culture systems.

    PubMed

    Radmer, R; Cox, J; Lieberman, D; Behrens, P; Arnett, K

    1987-01-01

    Algal cultures can be very rapid and efficient means to generate biomass and regenerate the atmosphere for closed environmental life support systems. However, as in the case of most higher plants, a significant fraction of the biomass produced by most algae cannot be directly converted to a useful food product by standard food technology procedures. This waste biomass will serve as an energy drain on the overall system unless it can be efficiently recycled without a significant loss of its energy content. We report experiments in which cultures of the algae Scenedesmus obliquus were grown in the light and at the expense of an added carbon source, which either replaced or supplemented the actinic light. As part of these experiments we tested hydrolyzed waste biomass from these same algae to determine whether the algae themselves could be made part of the biological recycling process. Results indicate that hydrolyzed algal (and plant) biomass can serve as carbon and energy sources for the growth of these algae, suggesting that the efficiency of the closed system could be significantly improved using this recycling process.

  12. Biomass recycle as a means to improve the energy efficiency of CELSS algal culture systems

    NASA Technical Reports Server (NTRS)

    Radmer, R.; Cox, J.; Lieberman, D.; Behrens, P.; Arnett, K.

    1987-01-01

    Algal cultures can be very rapid and efficient means to generate biomass and regenerate the atmosphere for closed environmental life support systems. However, as in the case of most higher plants, a significant fraction of the biomass produced by most algae cannot be directly converted to a useful food product by standard food technology procedures. This waste biomass will serve as an energy drain on the overall system unless it can be efficiently recycled without a significant loss of its energy content. Experiments are reported in which cultures of the alga Scenedesmus obliquus were grown in the light and at the expense of an added carbon source, which either replaced or supplemented the actinic light. As part of these experiments, hydrolyzed waste biomass from these same algae were tested to determine whether the algae themselves could be made part of the biological recycling process. Results indicate that hydrolyzed algal (and plant) biomass can serve as carbon and energy sources for the growth of these algae, suggesting that the efficiency of the closed system could be significantly improved using this recycling process.

  13. PREFERENTIAL RECYCLING/REJECTION IN CFBC/FBC SYSTEMS USING TRIBOELECTROSTATIC SEPARATION

    SciTech Connect

    Heng Ban; John M. Stencel

    2004-12-01

    Circulating Fluidized Bed Combustion (CFBC) and Fluidized Bed Combustion (FBC) with recirculation are widely used technologies in the US for power generation. They have the advantage of fuel flexibility, and low NO{sub x} and SO{sub x} emissions. Typically, as partially combusted fuel is circulated in the system, only a split stream of this circulating stream is rejected, with the remainder recycled to the combustor. As a consequence, there is unburned carbon and partially used and valuable calcium hydroxide in the reject stream. If these useful materials in the reject stream can be recovered and sent back to the combustor, the efficiency of the system will be increased significantly and the equivalent emissions will be lower. This project studies an innovative concept to incorporate triboelectric separation into CFBC/FBC systems in order to preferentially split its recycle/reject streams based on material compositions of the particles. The objective is to answer whether useful constituents, like carbon, calcium carbonate and calcium hydroxide or oxide, can be selectively separated from combustion ash at elevated temperatures. Laboratory experimental studies are performed at temperatures from 25 C to 210 C,the data from which are presented in the form of recovery curves. These curves present quality-versus-quantity information useful for predicting the efficacy of triboelectric separation as applied to CFBC/FBC byproduct recycling and/or rejection.

  14. MARS (Molecular Adsorbent Recirculating System): experience in 34 cases of acute liver failure.

    PubMed

    Novelli, Gilnardo; Rossi, Massimo; Pretagostini, Renzo; Poli, Luca; Novelli, Luigi; Berloco, Pasquale; Ferretti, Giancarlo; Iappelli, Massimo; Cortesini, Raffaello

    2002-01-01

    As reported in the literature, the mortality rates for patients with Acute Hepatic Failure (AHF) approaches 80% in cases in which liver transplantation is not possible. Post-transplant mortality mostly depends on the severity of the neurological condition at the time of the operation (20% in I-II degree coma patients and 44% in III degree coma patients). The primary indications for liver transplantation in AHF are Fulminant Hepatitis (FH)(93%), Subfulminant Hepatitis (5%) and other indications (2%). Other causes of AHF are Primary Non-Function (PNF) and Delayed Function (DF), which occur in 7-10%. Therefore it becomes necessary to monitor the patients with a Liver Support Device to be able to improve the clinical condition of the patients before liver transplantation (LT). In our experience we used the Molecular Adsorbent Recirculating System (MARS) (MARS Monitor; Teraklin AG, Rostock Germany), which enables the selective removal of albumin-bound substances accumulating in liver failure by the use of albumin-enriched dialysate. The system is used as a bridging device to orthotopic liver transplantation (OLT) of patients with FHF. We studied 34 patients, including 16 males and 18 females: 9 were affected by Primary-Non-Function (PNF), nine by Fulminant Hepatitis (FH), six by Delayed-Non-Function (DNF), and ten by Acute on Chronic Hepatic Failure (AOCHF). The average age of the patients was 41.8 years and the average number of applications was 6.4; the median length of application was about eight hours. The parameters that we monitored, before and after each treatment, were neurological status (EEG, cerebral CT, Glasgow Coma Score), haemodynamic parameters, acid base equilibrium, and blood gas analysis. We also monitored hepatic and renal function. In addition, the clinical conditions of the patients were monitored using kidney and liver ultrasound/ultrasonography (US). Inclusion criteria were bilirubin > 15 mg/dL, ammonia > 160 micro g/dL and a Glasgow Coma Score

  15. Termite symbiotic systems: efficient bio-recycling of lignocellulose.

    PubMed

    Ohkuma, M

    2003-03-01

    Termites thrive in great abundance in terrestrial ecosystems and play important roles in biorecycling of lignocellulose. Together with their microbial symbionts, they efficiently decompose lignocellulose. In so-called lower termites, a dual decomposing system, consisting of the termite's own cellulases and those of its gut protists, was elucidated at the molecular level. Higher termites degrade cellulose apparently using only their own enzymes, because of the absence of symbiotic protists. Termite gut prokaryotes efficiently support lignocellulose degradation. However, culture-independent molecular studies have revealed that the majority of these gut symbionts have not yet been cultivated, and that the gut symbiotic community shows a highly structured spatial organization. In situ localization of individual populations and their functional interactions are important to understand the nature of symbioses in the gut. In contrast to cellulose, lignin degradation does not appear to be important in the gut of wood-feeding termites. Soil-feeding termites decompose humic substances in soil at least partly, but little is known about the decomposition. Fungus-growing termites are successful in the almost complete decomposition of lignocellulose in a sophisticated cooperation with basidiomycete fungi cultivated in their nest. A detailed understanding of efficient biorecycling systems, such as that for lignocellulose, and the symbioses that provide this efficiency will benefit applied microbiology and biotechnology.

  16. Advanced Non-Destructive Assay Systems and Special Instrumentation Requirements for Spent Nuclear Fuel Recycling Facilities

    SciTech Connect

    Simpson, A.P.; Clapham, M.J.; Swinson, B.

    2008-07-01

    The safe and efficient operation of the next generation of Spent Nuclear Fuel (SNF) recycling / reprocessing facilities is dependent upon the availability of high performance real time Non- Destructive Assay (NDA) systems at key in-line points. A diverse variety of such special instrument systems have been developed and commissioned at reprocessing plants worldwide over the past fifty years.. The measurement purpose, technique and plant performance for selected key systems have been reviewed. Obsolescence issues and areas for development are identified in the context of the measurements needs of future recycling facilities and their associated waste treatment plants. Areas of concern include (i) Materials Accountancy and Safeguards, (ii) Head End process control and feed envelope verification, (iii) Real-time monitoring at the Product Finishing Stages, (iv) Criticality safety and (v) Radioactive waste characterization. Common characteristics of the traditional NDA systems in historical recycling facilities are (i) In-house development of bespoke instruments resulting in equipment that if often unique to a given facility and generally not commercially available, (ii) Use of 'novel' techniques - not widely deployed in other applications, (iii) Design features that are tailored to the specific plant requirements of the facility operator, (iv) Systems and software implementation that was not always carried out to modern industry standards and (v) A tendency to be overly complex - refined by on-plant operational usage and experience. Although these systems were 'validated in use' and are generally fit for purpose, there are a number of potential problems in transferring technology that was developed ten or more years ago to the new build SNF recycling facilities of the future. These issues include (i) Obsolescence of components - particularly with respect to computer hardware and data acquisition electronics, (ii) Availability of Intellectual Property and design

  17. Reuse and recycling of secondary effluents in refineries employing advanced multi-barrier systems.

    PubMed

    Lahnsteiner, J; Mittal, R

    2010-01-01

    In this paper the reclamation and reuse of municipal secondary effluents, as well as the reclamation and recycling of refinery secondary effluents, are technically and economically evaluated. It is shown that both practices are feasible and sustainable, and that the reclamation costs depend largely on specific circumstances such as legal requirements, price policy, reuse application, raw water composition, etc. The reclaimed water is reused, or respectively recycled, as boiler make-up. Therefore both reclamation plants employ advanced multi-barrier systems including ultra-filtration and reverse osmosis. The employed processes have shown excellent performance with regard to the removal of critical parameters such as silica. For example, this parameter was reduced from 13 mg/l in the raw water to 7 μg/l in the boiler make-up.

  18. Development of methods for the decrease in instability of recycling water of conjugated closed-circuit cooling system of HPP

    NASA Astrophysics Data System (ADS)

    Chichirov, A. A.; Chichirova, N. D.; Vlasov, S. M.; Lyapin, A. I.; Misbakhov, R. Sh.; Silov, I. Yu.; Murtazin, A. I.

    2016-10-01

    On Russian HPPs, conjugated closed-circuit cooling systems, where purge water is used as initial for water-treatment facilities, are widespread. For this reason, it is impossible to use general methods for the stabilization treatment of recycling water in order to prevent scale formation in the units of a system, namely, turbine condensers and cooling towers. In this paper, the methods for the decrease in the instability of recycling water using the methods of chemical engineering, such as stabilization and synchronization of flows and organization of recycles, are suggested. The results of an industrial experiment on the implementation of stabilization treatment of recycling water by the organization of recycle are given. The experiment was carried out on Kazan CHPP-3. The flow scheme involved the recycle of chemically purified water (CPW) for the heat network make-up to the closed-circuit cooling system. The experiment was carried out at three stages with the gradual change of the consumption of the recycle, namely, 0, 50, and 100 t/h. According to the results of experiments, the reliable decrease in the rate of the sedimentation was recorded on the units of the system, namely, turbine condenser and chimney-type cooling tower. This is caused by two reasons. Firstly, this is periodic excessive concentration of recycling water due to the nonstationary character of inlet and outlet flows. Secondly, this is seasonal (particularly, in the summer period) exceeding of the evaporation coefficient. As a result of stabilization and synchronization of flows and organization of recycles, the quality of clarified and chemically purified water for the heat network make-up increases and the corrosion of iron- and copper-containing structural materials decreases. A natural decrease in temperature drop on the operating turbine condensers is mentioned.

  19. Integrated renewable energy/organic waste recycling system. Final report, July 31, 1982

    SciTech Connect

    Hamburg, R.A.; Davenport, S.

    1982-01-01

    Two operating systems for integrated recycling of organic materials are described. The systems include Chinese water-pressure design biogas digesters/solar greenhouses/and algae and aquatic plant ponds-all in passive symbiotic relationships with a minimum of technological sophistication. Economic, Financial and Net Energy Analyses of these systems have been done with concern toward long term environmental effects. A discussion of fish ponds and fuel alcohol production is also included since they offer much potential for expanded integration. 21 tabs.

  20. When sink becomes source: Importance of sediment recycling in linked orogen-basin systems

    NASA Astrophysics Data System (ADS)

    Romans, Brian W.; Fosdick, Julie C.; Hubbards, Stephen M.; Fildani, Andrea

    2013-04-01

    Much of the recent research on sedimentary system dynamics has focused on extant systems where the linkage of sediment production from eroding highlands can be directly linked to deposition in lowlands and/or offshore basins. Studies of such systems, typically late Pleistocene to Holocene in age, are especially valuable for quantitative constraints such as system morphometrics (e.g., longitudinal profiles, basin volumes, etc.) and rates of processes (e.g., erosion/denudation, sediment accumulation, etc.), which can be measured directly or estimated with relatively high certainty. Moreover, information about climate and tectonic forcings that are independent to the system is explicitly known for extant systems. However, an understanding of longer-term (>105 yr) evolution can only be gained through the investigation of ancient systems. Such systems are either buried in the subsurface, which requires geophysical remote sensing and/or drilling, or exposed at the Earth's surface as outcrops as the result of uplift and exhumation. The dynamic linkage of mountain belt and adjacent basin makes foreland basin systems ideal natural laboratories to address long-term sedimentary system evolution. In this presentation, we highlight important issues and challenges that sedimentary systems research is currently facing, with an emphasis on sediment recycling during progressive stages of basin development. In this context, we focus on sedimentary systems in which multiple episodes of uplift and erosion of the primary depocenter led to a history whereby basin material was repeatedly recycled. The spatial and temporal aspects of sediment recycling have implications for how provenance signals (based on composition, crystallization or metamorphic age information, thermal history, etc.) are used. Additionally, improved constraints regarding the timescales and magnitude of sediment recycling have implications for system-scale modeling. Key parameters such as total sediment volumes and

  1. Influence of carboxylic ion-pairing reagents on retention of peptides in thin-layer chromatography systems with C18 silica-based adsorbents.

    PubMed

    Gwarda, Radosław Ł; Aletańska-Kozak, Monika; Klimek-Turek, Anna; Ziajko-Jankowska, Agnieszka; Matosiuk, Dariusz; Dzido, Tadeusz H

    2016-04-01

    One of the main problems related to chromatography of peptides concerns adverse interactions of their strong basic groups with free silanol groups of the silica based stationary phase. Influence of type and concentration of ion-pairing regents on peptide retention in reversed-phase high-performance liquid chromatography (RP-HPLC) systems has been discussed before. Here we present influence of these mobile phase additives on retention of some peptide standards in high-performance thin-layer chromatography (HPTLC) systems with C18 silica-based adsorbents. We prove, that due to different characteristic of adsorbents used in both techniques (RP HPLC and HPTLC), influence of ion-pairing reagents on retention of basic and/or amphoteric compounds also may be quite different. C18 silica-based HPTLC adsorbents provide more complex mechanism of retention and should be rather considered as mixed-mode adsorbents.

  2. Fluorescence monitoring at a recycled water treatment plant and associated dual distribution system--implications for cross-connection detection.

    PubMed

    Hambly, A C; Henderson, R K; Storey, M V; Baker, A; Stuetz, R M; Khan, S J

    2010-10-01

    Dual distribution systems are becoming increasingly common in greenfield housing developments in Australia for the redistribution of recycled water to households for non-potable use. Within such schemes there exists the potential for cross-connections between recycled and drinking water systems. Due to the high level of recycled water treatment, these events are unlikely to lead to outbreaks of illness in the community. Nonetheless, they do represent a breach of the recycled water risk management strategy and therefore an elevated level of risk to consumers. Furthermore, cross-connection events have the potential to undermine public confidence in these types of water recycling. A rapid, highly sensitive method of cross-connection detection may therefore provide an additional level of confidence in these schemes. The aim of this research was to determine the potential for using fluorescence spectroscopy as a monitoring tool in water treatment plants and dual distribution systems. Samples from both the water recycling plant and dual distribution system were collected on a weekly basis over 12 weeks. Fluorescence excitation-emission matrix (EEM) spectra and water quality parameters including dissolved organic carbon, UV(254), pH, conductivity, free chlorine and turbidity were obtained for each sample. The fluorescence EEM spectra of recycled and drinking water were distinctly different and exhibited low variability throughout the course of the sampling program, indicating a degree of stability of the fluorescent components within the organic matter. A ten-fold difference in mean fluorescence intensity was observed for recycled water compared to drinking water, which was greater than the difference observed for the other measured water quality parameters. Probabilistic analysis was used to determine the reliable detection limit of recycled water contamination of drinking water. Accounting for the inherent variability of both recycled water and drinking water, a 45

  3. Application of portable fluorescence spectrophotometry for integrity testing of recycled water dual distribution systems.

    PubMed

    Hambly, Adam C; Henderson, Rita K; Baker, Andy; Stuetz, Richard M; Khan, Stuart J

    2015-01-01

    Water utilities supplying recycled water to households via a "third-pipe" or "dual reticulation" system have a need for a rapid, portable method to detect cross-connections within potable water reticulation networks. This study evaluates portable fluorimetry as a technique for cross-connection detection in the field. For the first time, an investigation of a full-scale dual reticulation water-recycling network has been carried out to identify cross-connections using a portable fluorimeter. We determined that this can be carried out with a 3 mL water sample, and unlike methods that are currently in use for cross-connection detection, can be achieved quickly without disruption to water flow or availability within the network. It was also revealed that fluorescence trigger values could be established with high levels of confidence by sampling less than 2.5% of the network. Fluorescence analysis was also able to uncover a single, real cross-connection event. As such, this paper is a fundamental demonstration of fluorescence as a reliable, highly portable technique for cross-connection detection within dual reticulation water recycling networks and further establishes the abilities of fluorescence devices as valuable field instruments for water quality monitoring.

  4. Evaluation of concrete recycling system efficiency for ready-mix concrete plants.

    PubMed

    Vieira, Luiz de Brito Prado; Figueiredo, Antonio Domingues de

    2016-10-01

    The volume of waste generated annually in concrete plants is quite large and has important environmental and economic consequences. The use of fresh concrete recyclers is an interesting way for the reuse of aggregates and water in new concrete production. This paper presents a study carried out for over one year by one of the largest ready-mix concrete producers in Brazil. This study focused on the evaluation of two recyclers with distinct material separation systems, herein referred to as drum-type and rotary sieve-type equipment. They were evaluated through characterization and monitoring test programs to verify the behaviour of recovered materials (aggregates, water, and slurry). The applicability of the recovered materials (water and aggregates) was also evaluated in the laboratory and at an industrial scale. The results obtained with the two types of recyclers used were equivalent and showed no significant differences. The only exception was in terms of workability. The drum-type recycler generated fewer cases that required increased pumping pressure. The analysis concluded that the use of untreated slurry is unfeasible because of its intense negative effects on the strength and workability of concrete. The reclaimed water, pre-treated to ensure that its density is less than 1.03g/cm(3), can be used on an industrial scale without causing any harm to the concrete. The use of recovered aggregates consequently induces an increase in water demand and cement consumption to ensure the workability conditions of concrete that is proportional to the concrete strength level. Therefore, the viability of their use is restricted to concretes with characteristic strengths lower than 25MPa.

  5. Evaluation of concrete recycling system efficiency for ready-mix concrete plants.

    PubMed

    Vieira, Luiz de Brito Prado; Figueiredo, Antonio Domingues de

    2016-10-01

    The volume of waste generated annually in concrete plants is quite large and has important environmental and economic consequences. The use of fresh concrete recyclers is an interesting way for the reuse of aggregates and water in new concrete production. This paper presents a study carried out for over one year by one of the largest ready-mix concrete producers in Brazil. This study focused on the evaluation of two recyclers with distinct material separation systems, herein referred to as drum-type and rotary sieve-type equipment. They were evaluated through characterization and monitoring test programs to verify the behaviour of recovered materials (aggregates, water, and slurry). The applicability of the recovered materials (water and aggregates) was also evaluated in the laboratory and at an industrial scale. The results obtained with the two types of recyclers used were equivalent and showed no significant differences. The only exception was in terms of workability. The drum-type recycler generated fewer cases that required increased pumping pressure. The analysis concluded that the use of untreated slurry is unfeasible because of its intense negative effects on the strength and workability of concrete. The reclaimed water, pre-treated to ensure that its density is less than 1.03g/cm(3), can be used on an industrial scale without causing any harm to the concrete. The use of recovered aggregates consequently induces an increase in water demand and cement consumption to ensure the workability conditions of concrete that is proportional to the concrete strength level. Therefore, the viability of their use is restricted to concretes with characteristic strengths lower than 25MPa. PMID:27478022

  6. Microwave Schottky diagnostic systems for the Fermilab Tevatron, Recycler, and CERN LHC

    SciTech Connect

    Pasquinelli, Ralph J.; Jansson, Andreas; /ESS, Lund

    2011-02-01

    A means for non-invasive measurement of transverse and longitudinal characteristics of bunched beams in synchrotrons has been developed based on high sensitivity slotted waveguide pickups. The pickups allow for bandwidths exceeding hundreds of MHz while maintaining good beam sensitivity characteristics. Wide bandwidth is essential to allow bunch-by-bunch measurements by means of a fast gating system. The Schottky detector system is installed and successfully commissioned in the Fermilab Tevatron and Recycler and CERN LHC synchrotrons. Measurement capabilities include tune, chromaticity, and momentum spread of single or multiple beam bunches in any combination. With appropriate calibrations, emittance can also be measured by integrating the area under the incoherent tune sidebands.

  7. Economical and ecological comparison of granular activated carbon (GAC) adsorber refill strategies.

    PubMed

    Bayer, Peter; Heuer, Edda; Karl, Ute; Finkel, Michael

    2005-05-01

    Technical constraints can leave a considerable freedom in the design of a technology, production or service strategy. Choosing between economical or ecological decision criteria then characteristically leads to controversial solutions of ideal systems. For the adaptation of granular-activated carbon (GAC) fixed beds, various technical factors determine the adsorber volume required to achieve a desired service life. In considering carbon replacement and recycling, a variety of refill strategies are available that differ in terms of refill interval, respective adsorber volume, and time-dependent use of virgin, as well as recycled GAC. Focusing on the treatment of contaminant groundwater, we compare cost-optimal reactor configurations and refill strategies to the ecologically best alternatives. Costs and consumption of GAC are quantified within a technical-economical framework. The emissions from GAC production out of hard coal, transport and recycling are equally derived through a life cycle impact assessment. It is shown how high discount rates lead to a preference of small fixed-bed volumes, and accordingly, a high number of refills. For fixed discount rates, the investigation reveals that both the economical as well as ecological assessment of refill strategies are especially sensitive to the relative valuation of virgin and recycled GAC. Since recycling results in economic and ecological benefits, optimized systems thus may differ only slightly.

  8. Recycling decision support system: Design and development of a Web-based DSS. Master thesis

    SciTech Connect

    Tettelbach, C.G.

    1997-03-01

    The explosive growth of the World Wide Web creates new opportunities for the development and deployment of Decision Support Systems. No longer restricted by machine-specific limitations, Web-based Decision Support Systems (DSS) provide global access to widely diversified and geographically dispersed users through sharing of data, models, algorithms, and modeling environments. This thesis examines the design and development processes involved in the creation of a Web-based DSS. The Recycling Decision Support System utilizes a rapid prototype and refinement process to create a Web-based system focusing on supporting ordinary people and industrial users in making good decisions for recycling and disposal of household and industrial waste. Through abstraction of details from the specific Web-based DSS design, a generalized framework for supporting decision-making via the WWW is built which supports functionality in education, queries, and analysis of complex problems. An important aspect of this research is the development of a new architecture which conforms to the complexities specific to Web-based Decision Support Systems. Prompted by the additional interactions required for WWW connectivity, this architecture incorporates agents for negotiating transactions between the functional components of a standard DSS.

  9. Type of adsorbent and column height in adsorption process of used cooking oil

    NASA Astrophysics Data System (ADS)

    Hasnelly, Hervelly, Taufik, Yusman; Melany, Ivo Nila

    2015-12-01

    The purpose of this research was to find out the best adsorbent and column height that can adsorb color and soluble impurities substances in used cooking oil. This research was meant for knowledge development of refined cooking oil technology. The used of this research was giving out information on the recycling process of used cooking oil. Research design used 2 × 2 factorial pattern in randomized group design with 6 repetitions. The first factor is adsorbent type (J) that consist of activated carbon (J1) and Zeolit (J2). The second factor is column height (K) with variations of 15 cm (k1) and 20 cm (k2). Chemical analysis parameter are free fatty acid, water content and saponification value. Physical parameter measurement was done on color with Hunter Lab system analysis and viscosity using viscometer method. Chemical analysis result of preliminary research on used cooking oil showed water content of 1,9%, free fatty acid 1,58%, saponification value 130,79 mg KOH/g oil, viscosity 0,6 d Pas and color with L value of -27,60, a value 1,04 and b value 1,54. Result on main research showed that adsorbent type only gave effect on water content whereas column height and its interaction was not gave significant effect on water content. Interaction between adsorbent type (J) and column height (K) gave significant effect to free fatty acid, saponification value, viscosity and color for L, a and b value of recycled cooking oil.

  10. Mechatronic Design and Control of a Waste Paper Sorting System for Efficient Recycling

    SciTech Connect

    Venditti, R. A.; Ramasubramanian, M. K.

    2007-11-13

    Sorting of paper into compatible grades is a necessary step prior to recycling. Current method of manually sorting is tedious, slow, and expensive. Hence, significant part of the waste paper stream is sent to the landfill. High speed automation of the sorting process will improve the cost efficiency and increase the amount of paper recycled significantly. There have been recent developments in automation of this process. Mechanisms for the distribution of the papers from a bale onto a moving conveyor and the pneumatic actuation to deflect papers into different streams are well established. Correct identification of the sample in real-time before the sample reaches the actuation station still remains a challenge since different types of paper and board samples are mixed in a waste stream, and has a lot of variation in terms of color, chemical composition, coating, and prints in black and white and color to different degrees. This is primarily due to the lack of satisfactory sensors and sensor fusion algorithms for sample identification in real-time. In this report, we identify key parameters that must be measured (lignin, stiffness, color gloss), sensor design, and integration of the output from sensors to interpret the type of sample using a fuzzy inference system. Results show that the sensor system proposed is capable of identifying the samples at 90% accuracy. The sensor system can be integrated onto a conveyor and actuation system for automated sorting.

  11. Feed-forward control of a solid oxide fuel cell system with anode offgas recycle

    NASA Astrophysics Data System (ADS)

    Carré, Maxime; Brandenburger, Ralf; Friede, Wolfgang; Lapicque, François; Limbeck, Uwe; da Silva, Pedro

    2015-05-01

    In this work a combined heat and power unit (CHP unit) based on the solid oxide fuel cell (SOFC) technology is analysed. This unit has a special feature: the anode offgas is partially recycled to the anode inlet. Thus it is possible to increase the electrical efficiency and the system can be operated without external water feeding. A feed-forward control concept which allows secure operating conditions of the CHP unit as well as a maximization of its electrical efficiency is introduced and validated experimentally. The control algorithm requires a limited number of measurement values and few deterministic relations for its description.

  12. Beam manipulation and compression using broadband rf systems in the Fermilab Main Injector and Recycler

    SciTech Connect

    G William Foster et al.

    2004-07-09

    A novel method for beam manipulation, compression, and stacking using a broad band RF system in circular accelerators is described. The method uses a series of linear voltage ramps in combination with moving barrier pulses to azimuthally compress, expand, or cog the beam. Beam manipulations can be accomplished rapidly and, in principle, without emittance growth. The general principle of the method is discussed using beam dynamics simulations. Beam experiments in the Fermilab Recycler Ring convincingly validate the concept. Preliminary experiments in the Fermilab Main Injector to investigate its potential for merging two ''booster batches'' to produce high intensity proton beams for neutrino and antiproton production are described.

  13. Albumin dialysis with molecular adsorbent recirculating system (MARS) for the treatment of hepatic encephalopathy in liver failure.

    PubMed

    Kobashi-Margáin, Ramón A; Gavilanes-Espinar, Juan G; Gutiérrez-Grobe, Ylse; Gutiérrez-Jiménez, Angel A; Chávez-Tapia, Norberto; Ponciano-Rodríguez, Guadalupe; Uribe, Misael; Méndez Sánchez, Nahum

    2011-06-01

    Acute, acute-on-chronic and chronic liver diseases are major health issues worldwide, and most cases end with the need for liver transplantation. Up to 90% of the patients die waiting for an organ to be transplanted. Hepatic encephalopathy is a common neuropsychiatric syndrome that usually accompanies liver failure and impacts greatly on the quality of life. The molecular adsorbent recirculating system (MARS) is a recently developed form of artificial liver support that functions on a base of albumin dialysis. It facilitates the dialysis of albumin-bound and water-soluble toxins, allowing the patient to survive and even improving some clinical features of liver failure. The following manuscript reviews the technical features of MARS operation and some of the clinical trials that analyze the efficacy of the system in the therapy of liver diseases.

  14. Adsorbate induced mesoscopic surface reconstruction of the system Te/Pd(1 0 2)

    NASA Astrophysics Data System (ADS)

    Godzik, G.; Pfnür, H.

    2001-08-01

    Low energy electron diffraction (LEED) measurements have been carried out on the clean and Te covered Pd(1 0 2) surface. This is the surface into which the Pd(1 0 0) surface is reconstructed by a concentration of more than 0.5 ML of Te. The Pd(1 0 2) surface was produced with a terrace width of more than 1000 Å. Up to 0.5 ML the adsorption of Te takes place on the flat (1 0 2) surface, on which islands with (2×1) structure are formed coupled with a reduction of the terrace widths to about half the initial value. Above 0.5 ML, and up to 1 ML, the adsorbed Te atoms produce a structural change of the surface, i.e. a terrace structure is formed with a clear average terrace length that depends on Te concentration and with step edges in [ 2¯ 0 1] direction. As concluded from the characteristic splitting of LEED spots as a function of energy, these terraces occupy only two height levels in an alternating sequence and are separated by steps of single atomic height. The terrace width of the alternating terraces increases with increasing Te-concentration. Again a flat surface is formed at 1 ML of Te. A geometrical model is established and discussed.

  15. Highly Efficient and Facile Photocatalytic Recycling System Suitable for ICAR ATRP of Hydrophilic Monomers.

    PubMed

    Jiang, Xiaowu; Zhang, Lifen; Cheng, Zhenping; Zhu, Xiulin

    2016-08-01

    Photoinduced initiators for continuous activator regeneration atom transfer radical polymerization (ATRP) of hydrophilic monomers in heptane/ethanol latent-biphasic system for copper catalyst separation and recycling have been realized for the first time at room temperature with different wavelengths of visible light LED (green, blue, purple, and white LED) as external stimulus, using 2-bromophenylacetate as the ATRP initiator and camphorquinone/triethylamine as the photoinitiator. In this system, hybrid catalyst complex (HCc) is synthesized as a novel nonpolar catalyst, which is preferentially dissolved in heptane. The hydrophilic polymers obtained catalyzed by HCc in heptane/ethanol mixture solvent show typical "living" features, for example, the values of Mn,GPC increase linearly with monomer conversion up to quantitative level (>96%) and the molecular weight distributions were kept narrow (Mw /Mn < 1.20) throughout the polymerization process. It should be noted that the excellent controllability of this novel polymerization system can be achieved even after 5 catalyst recycling experiments under LED irradiation. PMID:27296245

  16. STUDY ON THE RECYCLING SYSTEM OF WASTE PLASTICS AND MIXED PAPER FROM A LONG-TERM PERSPECTIVE

    NASA Astrophysics Data System (ADS)

    Fujii, Minoru; Fujita, Tsuyoshi; Chen, Xudong; Ohnishi, Satoshi; Osako, Masahiro; Moriguchi, Yuichi; Yamaguchi, Naohisa

    Plastics and mixed paper in municipal solid waste are valuable resources with high calorific value. However, the recycling cost to utilize them tends to be expensive. In addition, recycling system has to be consistent with the reduce of wastes on which should be put higher-priority to lower carbon emission and save resources in the long term. In this paper, we proposed a recycling system (smart recycling system) which consists of a local center an d existing facilities in arterial industries. In the local center, collected waste plastics and mixed paper from household are processed on the same line into a form suitable for transportation and handling in a facility of arterial in dustry which can utilize those wastes effectively. At the same time, a part of plastics with high quality is processed into a recycled resin in the center. It was suggested that, by utilizing existing facilities in arterial industries which have enough and flexible capacity to accept those wastes, the system can be a robust system even if the amount of wastes generation fluctuates widely. The effect of CO2 reduction and cost by installing the system were calculated and it was estimated that 3.5 million ton of additional annual CO2 reduction could be brought in Tokyo and surrounding three prefectures without co nsiderable increase in cost.

  17. Apparatus and method for removing solvent from carbon dioxide in resin recycling system

    DOEpatents

    Bohnert, George W.; Hand, Thomas E.; DeLaurentiis, Gary M.

    2009-01-06

    A two-step resin recycling system and method solvent that produces essentially contaminant-free synthetic resin material. The system and method includes one or more solvent wash vessels to expose resin particles to a solvent, the solvent contacting the resin particles in the one or more solvent wash vessels to substantially remove contaminants on the resin particles. A separator is provided to separate the solvent from the resin particles after removal from the one or more solvent wash vessels. The resin particles are next exposed to carbon dioxide in a closed loop carbon dioxide system. The closed loop system includes a carbon dioxide vessel where the carbon dioxide is exposed to the resin, substantially removing any residual solvent remaining on the resin particles after separation. A separation vessel is also provided to separate the solvent from the solvent laden carbon dioxide. Both the carbon dioxide and the solvent are reused after separation in the separation vessel.

  18. Gold coast seaway smartrelease decision support system: optimising recycled water release in a sub tropical estuarine environment.

    PubMed

    Stuart, G; Hollingsworth, A; Thomsen, F; Szylkarski, S; Khan, S; Tomlinson, R; Kirkpatrick, S; Catterall, K; Capati, B

    2009-01-01

    Gold Coast Water is responsible for the management of the water, recycled water and wastewater assets of the City of the Gold Coast on Australia's east coast. Excess treated recycled water is released at the Gold Coast Seaway, a man-made channel connecting the Broadwater Estuary with the Pacific Ocean, on an outgoing tide in order for the recycled water to be dispersed before the tide changes and re-enters the Broadwater estuary. Rapid population growth has placed increasing demands on the city's recycled water release system and an investigation of the capacity of the Broadwater to assimilate a greater volume of recycled water over a longer release period was undertaken in 2007. As an outcome, Gold Coast Water was granted an extension of the existing release licence from 10.5 hours per day to 13.3 hours per day from the Coombabah wastewater treatment plant (WWTP). The Seaway SmartRelease Project has been designed to optimise the release of the recycled water from the Coombabah WWTP in order to minimise the impact to the receiving estuarine water quality and maximise the cost efficiency of pumping. In order achieve this; an optimisation study that involves intensive hydrodynamic and water quality monitoring, numerical modelling and a web-based decision support system is underway. An intensive monitoring campaign provided information on water levels, currents, winds, waves, nutrients and bacterial levels within the Broadwater. This data was then used to calibrate and verify numerical models using the MIKE by DHI suite of software. The Decision Support System will then collect continually measured data such as water levels, interact with the WWTP SCADA system, run the numerical models and provide the optimal time window to release the required amount of recycled water from the WWTP within the licence specifications. PMID:19844054

  19. Gold coast seaway smartrelease decision support system: optimising recycled water release in a sub tropical estuarine environment.

    PubMed

    Stuart, G; Hollingsworth, A; Thomsen, F; Szylkarski, S; Khan, S; Tomlinson, R; Kirkpatrick, S; Catterall, K; Capati, B

    2009-01-01

    Gold Coast Water is responsible for the management of the water, recycled water and wastewater assets of the City of the Gold Coast on Australia's east coast. Excess treated recycled water is released at the Gold Coast Seaway, a man-made channel connecting the Broadwater Estuary with the Pacific Ocean, on an outgoing tide in order for the recycled water to be dispersed before the tide changes and re-enters the Broadwater estuary. Rapid population growth has placed increasing demands on the city's recycled water release system and an investigation of the capacity of the Broadwater to assimilate a greater volume of recycled water over a longer release period was undertaken in 2007. As an outcome, Gold Coast Water was granted an extension of the existing release licence from 10.5 hours per day to 13.3 hours per day from the Coombabah wastewater treatment plant (WWTP). The Seaway SmartRelease Project has been designed to optimise the release of the recycled water from the Coombabah WWTP in order to minimise the impact to the receiving estuarine water quality and maximise the cost efficiency of pumping. In order achieve this; an optimisation study that involves intensive hydrodynamic and water quality monitoring, numerical modelling and a web-based decision support system is underway. An intensive monitoring campaign provided information on water levels, currents, winds, waves, nutrients and bacterial levels within the Broadwater. This data was then used to calibrate and verify numerical models using the MIKE by DHI suite of software. The Decision Support System will then collect continually measured data such as water levels, interact with the WWTP SCADA system, run the numerical models and provide the optimal time window to release the required amount of recycled water from the WWTP within the licence specifications.

  20. Preliminary study on direct recycling of spent BWR fuel in BWR system

    NASA Astrophysics Data System (ADS)

    Waris, A.; Sumbono, Prayudhatama, Dythia; Novitrian, Su'ud, Zaki

    2012-06-01

    Spent fuel management is considered to be one of the main problems in energy nuclear utilization. Recycling after reprocessing is one of the options for dealing with nuclear reactor spent fuel. Reprocessing is very costly and needs remote handling since spent fuel is very hazard high level waste. On top of that, only a small number of countries can manage a reprocessing plant. If country likes Indonesia decide to "go nuclear", it should find another way to deal with the nuclear spent fuel. Korea has proposed the DUPIC (Direct Utilization of Spent PWR fuel In CANDU) concept. Nevertheless, DUPIC concept requires two types of nuclear power plants, i.e., pressurized water reactor (PWR) and CANadian Deuterium Uranium reactor (CANDU). In this study, we evaluate a scheme of direct recycling of spent BWR fuel in BWR system, under the concept that we have called as a SUPEL (Straight Utilization of sPEnt LWR fuel in LWR system) scenario. Several spent BWR fuel compositions in loaded BWR fuel has been evaluated to achieve the criticality of reactor.

  1. Transverse digital damper system for the Fermilab anti-proton recycler

    SciTech Connect

    Eddy, N.; Crisp, J.; /Fermilab

    2006-05-01

    A transverse damping system is used in the Recycler at Fermilab to damp beam instabilities which arise from large beam intensities with electron cooling. Initial tests of electron cooling demonstrated beam loss due to transverse beam motion when the beam was cooled past the beam density threshold. The transverse damper system consists of two horizontal and two vertical pickups whose signals are amplified and passed into an analog hybrid to generate a difference signal from each pickup. The difference signals are input to a custom digital damper board which digitizes the analog signals at 212mhz, performs digital processing of the signals inside a large Altera Stratix II FPGA, then provides analog output at 212mhz via digital to analog converters. The digital damper output is sent to amplifiers which drive one horizontal and one vertical kicker. An initial prototype digital damper board has been successfully used in the Recycler for over six months. Currently, work is underway to replace the prototype board with an upgraded VME version.

  2. Heat transfer to the adsorbent in solar adsorption cooling device

    NASA Astrophysics Data System (ADS)

    Pilat, Peter; Patsch, Marek; Papucik, Stefan; Vantuch, Martin

    2014-08-01

    The article deals with design and construction of solar adsorption cooling device and with heat transfer problem in adsorber. The most important part of adsorption cooling system is adsorber/desorber containing adsorbent. Zeolith (adsorbent) type was chosen for its high adsorption capacity, like a coolant was used water. In adsorber/desorber occur, at heating of adsorbent, to heat transfer from heat change medium to the adsorbent. The time required for heating of adsorber filling is very important, because on it depend flexibility of cooling system. Zeolith has a large thermal resistance, therefore it had to be adapted the design and construction of adsorber. As the best shows the tube type of adsorber with double coat construction. By this construction is ensured thin layer of adsorbent and heating is quick in all volume of adsorbent. The process of heat transfer was experimentally measured, but for comparison simulated in ANSYS, too.

  3. Beneficial uses of recycled asphalt-stabilized products as landfill cover and capping systems

    SciTech Connect

    Camougis, G.

    1996-12-31

    The American Reclamation Corporation (AMREC{reg_sign}) has played a major role in the development of new programs for the recycling of discarded materials from construction, demolition, remediation and manufacturing operations. Excavated petroleum-contaminated soils (oily soils), asphalt paving, concrete rubble, and discarded asphalt roofing shingles have been processed and recycled into beneficially useful construction products. AMREC uses a cold-mix, asphalt-emulsion technology to process many of the recyclables received at its recycling facility in Charlton, MA. Recyclable materials are processed and blended to produce recycled, asphalt-stabilized products. In addition, recycled, asphalt-stabilized products are being investigated and tested for other beneficial uses. This includes their uses as capping materials and as containment materials.

  4. Life cycle assessment of a packaging waste recycling system in Portugal.

    PubMed

    Ferreira, S; Cabral, M; da Cruz, N F; Simões, P; Marques, R C

    2014-09-01

    Life Cycle Assessment (LCA) has been used to assess the environmental impacts associated with an activity or product life cycle. It has also been applied to assess the environmental performance related to waste management activities. This study analyses the packaging waste management system of a local public authority in Portugal. The operations of selective and refuse collection, sorting, recycling, landfilling and incineration of packaging waste were considered. The packaging waste management system in operation in 2010, which we called "Baseline" scenario, was compared with two hypothetical scenarios where all the packaging waste that was selectively collected in 2010 would undergo the refuse collection system and would be sent directly to incineration (called "Incineration" scenario) or to landfill ("Landfill" scenario). Overall, the results show that the "Baseline" scenario is more environmentally sound than the hypothetical scenarios.

  5. New approach to produce water free of bacteria, viruses, and halogens in a recyclable system.

    PubMed

    Ahmed, Abd el-Shafey I; Cavalli, Gabriel; Bushell, Michael E; Wardell, John N; Pedley, Steve; Charles, Katarina; Hay, John N

    2011-02-01

    The antimicrobial activity of a new cross-linked N-halamine polymer against bacteria and viruses was evaluated. The polymer achieved a 9-log(10) reduction of bacteria (both Escherichia coli and Staphylococcus aureus) in 1.5 h and a 5-log(10) reduction of bacteriophage PRD1 in 3 h. At the same time, the ability of the nonhalogenated polymer to trap halide ions was examined. The polymer was incorporated into a multifiltration system to study the ability to produce water free of bacteria, viruses, and halide ions. The antimicrobial activity, useful lifetime, halide ion level, and recycling possibilities of the system were quantified on a laboratory scale. A design for a large-scale multifiltration system based on this polymer is proposed.

  6. In situ combined chemical and biological assessment of estrogenic pollution in a water recycling system.

    PubMed

    Chi, Yulang; Huang, Qiansheng; Zhang, Huanteng; Chen, Yajie; Dong, Sijun

    2016-05-01

    Estrogenic pollution and its control in aquatic systems have drawn substantial attention around the world. The chemical and biological assessment approaches currently utilized in the laboratory or field cannot give an integrated assessment of the pollution when used separately. In this study, in situ chemical and biological methods were combined to detect pollution in a water recycling system. Data for the water quality index (WQI) demonstrated that the water treatment resulted in the decline of pollution from upstream to downstream. Wild male Nile tilapia, Oreochromis niloticus, was sampled in June and September. The concentrations of four common endocrine disrupting chemicals (EDCs) were determined in the tilapia liver by chromatographic analysis methods. The level of 17β-estradiol (E2) declined from upstream to downstream in both months. In contrast, the levels of bisphenol A (BPA), di-(2-ethylhcxyl) phthalate (DEHP), and perfluorooctane sulfonate (PFOS) did not display this declining tendency. The highest relative expression of vitellogenin 1 (VTG1) was observed in tilapia from upstream, then the level significantly decreased along the water system. The relative expression levels of CYP1A1 in the water system were also significantly higher than that of the control. However, no declining trend could be observed along the water system. The change of VTG1 expression corresponded well with that of E2 levels in the tilapia liver. Overall, our study assessed the pollution by endocrine disruptors using chemical and biological data with good correspondence. This study also demonstrated the effectiveness of the water recycling system in eliminating estrogen pollution in municipal sewage. PMID:27155427

  7. Nutrients recycling strategy for microalgae-based CO2 mitigation system

    NASA Astrophysics Data System (ADS)

    E, Xinyi

    Coal-fired electricity production is the major emitter of CO2 and other greenhouse gases including NOx and SO x. Microalgae-based CO2 mitigation systems have been proposed to reduce the net CO2 emission from coal-fired power plants. This study focused on developing an optimum culture media and exploring the possibilities for recycling nutrients, which were added as commercial mineralized chemicals at the beginning of cultivation. In order to release the nutrients embedded in the cells so that they can be used as a nutrient source for new cells, Scenedesmus biomass was digested by anaerobic bacteria. Results showed that thermal pretreatment enhanced the methane production rate for the first 7 days of digestion. Three operational factors were tested: heating temperature, heating duration and NaOH dosage. The combination of 10 min heating with 3˜6% NaOH at 50 °C gave the highest cell wall destruction for all samples except oven-dried algae. The anaerobic digestate, rich in mineralized nutrients including ammonium and phosphate, potassium and magnesium ions, was tested as a possible nutrient source for the algae cultivation. To cope with the high solid content of the digestates, the dosage of the digestates was reduced or the solid particles were removed prior to addition to the microalgae. Both approaches worked well in terms of providing nutrients with minimal effect on light penetration. Using digestates without any sterilization did not cause contamination or other deleterious effects on the Scenedesmus growth rate. Harvesting microalgae cells was critical to ensure a continuous and robust growth rate. The used media could be recycled at least four times without altering the algae growth. Nutrient replenishment was the key for a healthy culture when used media was incorporated. The combination of used media and digestates can sustain a normal algae growth. Life cycle assessment was conducted on the system including the photobioreactor, the anaerobic digester, the

  8. Field test results for nitrogen removal by the constructed wetland component of an agricultural water recycling system

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Wetland Reservoir Subirrigation Systems (WRSIS) are innovative agricultural water recycling systems that can provide economic and environmental benefits. A constructed wetland is a main component of WRSIS, and an important function of this constructed wetland is drainage water treatment of nitrog...

  9. Differences in Fish, Amphibian, and Reptile Communities Within Wetlands Created by an Agricultural Water Recycling System in Northwestern Ohio

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Establishment of a water recycling system known as the wetland-reservoir subirrigation system (WRSIS) results in the creation of wetlands adjacent to agricultural fields. Each WRSIS consists of one wetland designed to process agricultural chemicals (WRSIS wetlands) and one wetland to store subirriga...

  10. Hanford recycling

    SciTech Connect

    Leonard, I.M.

    1996-09-01

    This paper is a study of the past and present recycling efforts on the Hanford site and options for future improvements in the recycling program. Until 1996, recycling goals were voluntarily set by the waste generators: this year, DOE has imposed goals for all its sites to accomplish by 1999. Hanford is presently meeting the voluntary site goals, but may not be able to meet all the new DOE goals without changes to the program. Most of these new DOE goals are recycling goals: * Reduce the generation of radioactive (low-level) waste from routine operations 50 percent through source reduction and recycling. * Reduce the generation of low-level mixed waste from routine operations 50 percent through source reduction and recycling. * Reduce the generation of hazardous waste from routine operations 50 percent through source reduction and recycling. * Recycle 33 percent of the sanitary waste from all operations. * Increase affirmative procurement of EPA-designated recycled items to 100 percent. The Hanford recycling program has made great strides-there has been a 98 percent increase in the amount of paper recycled since its inception in 1990. Hanford recycles paper, chemicals cardboard, tires, oil, batteries, rags, lead weights, fluorescent tubes, aerosol products, concrete, office furniture, computer software, drums, toner cartridges, and scrap metal. Many other items are recycled or reused by individual groups on a one time basis without a formal contract. Several contracts are closed-loop contracts which involve all parts of the recycle loop. Considerable savings are generated from recycling, and much more is possible with increased attention and improvements to this program. General methods for improving the recycling program to ensure that the new goals can be met are: a Contract and financial changes 0 Tracking database and methods improvements 0 Expanded recycling efforts. Specifically, the Hanford recycling program would be improved by: 0 Establishing one overall

  11. A new 68Ge/68Ga generator system using an organic polymer containing N-methylglucamine groups as adsorbent for 68Ge.

    PubMed

    Nakayama, M; Haratake, M; Ono, M; Koiso, T; Harada, K; Nakayama, H; Yahara, S; Ohmomo, Y; Arano, Y

    2003-01-01

    A macroporous styrene-divinylbenzene copolymer containing N-methylglucamine groups was selected for a new 68Ge/68Ga generator system. This resin packed into a column effectively adsorbed the parent nuclide 68Ge. The daughter 68Ga was eluted from the resin with a solution of a low-affinity gallium chelating ligand such as citric or phosphoric acid. The 68Ge leakage was less than 0.0004% of the 68Ge adsorbed on the resin. By simple mixing of transferrin and desferoxamine conjugated HSA and IgG with the eluate from the column, 68Ga-labeling was completed in high yield. PMID:12485657

  12. The effect of aeration and effluent recycling on domestic wastewater treatment in a pilot-plant system of duckweed ponds.

    PubMed

    Ben-shalom, Miriam; Shandalov, Semion; Brenner, Asher; Oron, Gideon

    2014-01-01

    Three pilot-scale duckweed pond (DP) wastewater treatment systems were designed and operated to examine the effect of aeration and effluent recycling on treatment efficiency. Each system consisted of two DPs in series fed by pre-settled domestic sewage. The first system (duckweed+ conventional treatment) was 'natural' and included only duckweed plants. The second system (duckweed aeration) included aeration in the second pond. The third system (duckweed+ aeration+ circulation) included aeration in the second pond and effluent recycling from the second to the first pond. All three systems demonstrated similarly efficient removal of organic matter and nutrients. Supplemental aeration had no effect on either dissolved oxygen levels or on pollutant removal efficiencies. Although recycling had almost no influence on nutrient removal efficiencies, it had a positive impact on chemical oxygen demand and total suspended solids removals due to equalization of load and pH, which suppressed algae growth. Recycling also improved the appearance and growth rate of the duckweed plants, especially during heavy wastewater loads.

  13. A production-theory-based framework for analysing recycling systems in the e-waste sector

    SciTech Connect

    Schmidt, Mario . E-mail: mario.schmidt@hs-pforzheim.de

    2005-07-15

    Modern approaches in the production theory of business and management economics propose that objects (e.g. materials) be divided into good, bad or neutral. In transformation processes such as occur in production or recycling this makes it possible to distinguish stringently between the economic revenue of a process and the economic and ecological expenditures for it. This approach can be transferred to entire systems of processes in order to determine the system revenue and the system expenditure. Material flow nets or graphs are used for this purpose. In complex material flow systems it becomes possible to calculate not only the costs, but also the direct and indirect environmental impacts of an individual process or a system revenue (for example a product or the elimination of waste) consistently. The approach permits a stringent analysis as well as different analysis perspectives of a material flow system. It is particularly suitable for closed-loop economic systems in which material backflows occur. With the aid of an example developed jointly with Hewlett Packard Europe, the paper outlines how this approach can be employed in the field of e-waste management.

  14. A novel reverse-osmosis wash water recycle system for manned space stations

    NASA Technical Reports Server (NTRS)

    Ray, R. J.; Babcock, W. C.; Barss, R. P.; Andrews, T. A.; Lachapelle, E. D.

    1984-01-01

    The preliminary development of a wash water recycle system utilizing an inside-skinned hollow-fiber membrane is described. This module configuration is based on tube-side feed and is highly resistant to fouling with a minimum of pretreatment. During an ongoing research program for NASA, these modules were operated on actual wash waters with no significant fouling for a period of 40 days. Due to the tube-side-feed flow in these hollow-fiber membranes, the fibers themselves become the pressure vessels, allowing the development of extremely lightweight membrane modules. During the NASA research program, a pre-prototype membrane module capable of processing 6 gallons per day of wash water at 97 percent recovery was developed that can be dry-stored and that weighs 120 g.

  15. Human subjects concerns in ground based ECLSS testing - Managing uncertainty in closely recycled systems

    NASA Technical Reports Server (NTRS)

    Crump, William J.; Janik, Daniel S.; Thomas, L. Dale

    1990-01-01

    U.S. space missions have to this point used water either made on board or carried from earth and discarded after use. For Space Station Freedom, long duration life support will include air and water recycling using a series of physical-chemical subsystems. The Environmental Control and Life Support System (ECLSS) designed for this application must be tested extensively at all stages of hardware maturity. Human test subjects are required to conduct some of these tests, and the risks associated with the use of development hardware must be addressed. Federal guidelines for protection of human subjects require careful consideration of risks and potential benefits by an Institutional Review Board (IRB) before and during testing. This paper reviews the ethical principles guiding this consideration, details the problems and uncertainties inherent in current hardware testing, and presents an incremental approach to risk assessment for ECLSS testing.

  16. Recycled roads

    SciTech Connect

    Tarricone, P.

    1993-04-01

    This article examines the efforts of various states in the USA to recycle waste materials in highway construction as fill and pavements. The topics of the article include recycling used tires whole, ground, and shredded, cost of recycling, wood fiber chips as fill material in embankments, and mining wastes used to construct embankments and as coarse aggregates in asphalt pavement.

  17. Dishwashing water recycling system and related water quality standards for military use.

    PubMed

    Church, Jared; Verbyla, Matthew E; Lee, Woo Hyoung; Randall, Andrew A; Amundsen, Ted J; Zastrow, Dustin J

    2015-10-01

    As the demand for reliable and safe water supplies increases, both water quality and available quantity are being challenged by population growth and climate change. Greywater reuse is becoming a common practice worldwide; however, in remote locations of limited water supply, such as those encountered in military installations, it is desirable to expand its classification to include dishwashing water to maximize the conservation of fresh water. Given that no standards for dishwashing greywater reuse by the military are currently available, the current study determined a specific set of water quality standards for dishwater recycling systems for U.S. military field operations. A tentative water reuse standard for dishwashing water was developed based on federal and state regulations and guidelines for non-potable water, and the developed standard was cross-evaluated by monitoring water quality data from a full-scale dishwashing water recycling system using an innovative electrocoagulation and ultrafiltration process. Quantitative microbial risk assessment (QMRA) was also performed based on exposure scenarios derived from literature data. As a result, a specific set of dishwashing water reuse standards for field analysis (simple, but accurate) was finalized as follows: turbidity (<1 NTU), Escherichia coli (<50 cfu mL(-1)), and pH (6-9). UV254 was recommended as a surrogate for organic contaminants (e.g., BOD5), but requires further calibration steps for validation. The developed specific water standard is the first for dishwashing water reuse and will be expected to ensure that water quality is safe for field operations, but not so stringent that design complexity, cost, and operational and maintenance requirements will not be feasible for field use. In addition the parameters can be monitored using simple equipment in a field setting with only modest training requirements and real-time or rapid sample turn-around. This standard may prove useful in future development

  18. Antioxidant defenses in caterpillars: role of the ascorbate-recycling system in the midgut lumen.

    PubMed

    Barbehenn, R V; Bumgarner, S L; Roosen, E F; Martin, M M

    2001-04-01

    This study demonstrates that an ascorbate-recycling system in the midgut lumen can act as an effective antioxidant defense in caterpillars that feed on prooxidant-rich foods. In tannin-sensitive larvae of the forest tent caterpillar, Malacosoma disstria (Lasiocampidae), ingested tannic acid is oxidized in the midgut lumen, generating significant quantities of peroxides, including hydrogen peroxide, which readily diffuses across cell membranes and is a powerful cytotoxin. By contrast, in the tannin-tolerant larvae of the white-marked tussock moth, Orgyia leucostigma (Lymantriidae), tannic acid oxidation and the generation of peroxides are suppressed. The superior defense of O. leucostigma against oxidative stress imposed by the oxidation of ingested polyphenols can be explained by the presence of higher concentrations of ascorbate and glutathione in the midgut lumen. In O. leucostigma at least 50% of the ingested ascorbate present in the anterior midgut is still present in the posterior midgut, whereas in M. disstria, only 10% of the ascorbate is present in the posterior half of the midgut. We propose that the maintenance of higher levels of ascorbate in the midgut lumen of O. leucostigma than in M. disstria is explained by the secretion of glutathione into the midgut lumen by O. leucostigma, thereby forming a complete ascorbate-recycling system. The concentration of glutathione in the midgut lumen of O. leucostigma is 3.5-fold higher than in M. disstria and more than double the concentration in the diet. Our results emphasize the importance of a defensive strategy in herbivorous insects based on the maintenance of conditions in the gut lumen that reduce or eliminate the potential prooxidant behavior of ingested phenols.

  19. Evaluation of an ambient air sampling system for tritium (as tritiated water vapor) using silica gel adsorbent columns

    SciTech Connect

    Patton, G.W.; Cooper, A.T.; Tinker, M.R.

    1995-08-01

    Ambient air samples for tritium analysis (as the tritiated water vapor [HTO] content of atmospheric moisture) are collected for the Hanford Site Surface Environmental Surveillance Project (SESP) using the solid adsorbent silica gel. The silica gel has a moisture sensitive indicator which allows for visual observation of moisture movement through a column. Despite using an established method, some silica gel columns showed a complete change in the color indicator for summertime samples suggesting that breakthrough had occurred; thus a series of tests was conducted on the sampling system in an environmental chamber. The purpose of this study was to determine the maximum practical sampling volume and overall collection efficiency for water vapor collected on silica gel columns. Another purpose was to demonstrate the use of an impinger-based system to load water vapor onto silica gel columns to provide realistic analytical spikes and blanks for the Hanford Site SESP. Breakthrough volumes (V{sub b}) were measured and the chromatographic efficiency (expressed as the number of theoretical plates [N]) was calculated for a range of environmental conditions. Tests involved visual observations of the change in the silica gel`s color indicator as a moist air stream was drawn through the column, measurement of the amount of a tritium tracer retained and then recovered from the silica gel, and gravimetric analysis for silica gel columns exposed in the environmental chamber.

  20. Stormwater harvesting for irrigation purposes: an investigation of chemical quality of water recycled in pervious pavement system.

    PubMed

    Nnadi, Ernest O; Newman, Alan P; Coupe, Stephen J; Mbanaso, Fredrick U

    2015-01-01

    Most available water resources in the world are used for agricultural irrigation. Whilst this level of water use is expected to increase due to rising world population and land use, available water resources are expected to become limited due to climate change and uneven rainfall distribution. Recycled stormwater has the potential to be used as an alternative source of irrigation water and part of sustainable water management strategy. This paper reports on a study to investigate whether a sustainable urban drainage system (SUDS) technique, known as the pervious pavements system (PPS) has the capability to recycle water that meets irrigation water quality standard. Furthermore, the experiment provided information on the impact of hydrocarbon (which was applied to simulate oil dripping from parked vehicles onto PPS), leaching of nutrients from different layers of the PPS and effects of nutrients (applied to enhance bioremediation) on the stormwater recycling efficiency of the PPS. A weekly dose of 6.23 × 10(-3) L of lubricating oil and single dose of 17.06 g of polymer coated controlled-release fertilizer granules were applied to the series of 710 mm × 360 mm model pervious pavement structure except the controls. Rainfall intensity of 7.4 mm/h was applied to the test models at the rate of 3 events per week. Analysis of the recycled water showed that PPS has the capability to recycle stormwater to a quality that meets the chemical standards for use in agricultural irrigation irrespective of the type of sub-base used. There is a potential benefit of nutrient availability in recycled water for plants, but care should be taken not to dispose of this water in natural water courses as it might result in eutrophication problems. PMID:25256837

  1. Stormwater harvesting for irrigation purposes: an investigation of chemical quality of water recycled in pervious pavement system.

    PubMed

    Nnadi, Ernest O; Newman, Alan P; Coupe, Stephen J; Mbanaso, Fredrick U

    2015-01-01

    Most available water resources in the world are used for agricultural irrigation. Whilst this level of water use is expected to increase due to rising world population and land use, available water resources are expected to become limited due to climate change and uneven rainfall distribution. Recycled stormwater has the potential to be used as an alternative source of irrigation water and part of sustainable water management strategy. This paper reports on a study to investigate whether a sustainable urban drainage system (SUDS) technique, known as the pervious pavements system (PPS) has the capability to recycle water that meets irrigation water quality standard. Furthermore, the experiment provided information on the impact of hydrocarbon (which was applied to simulate oil dripping from parked vehicles onto PPS), leaching of nutrients from different layers of the PPS and effects of nutrients (applied to enhance bioremediation) on the stormwater recycling efficiency of the PPS. A weekly dose of 6.23 × 10(-3) L of lubricating oil and single dose of 17.06 g of polymer coated controlled-release fertilizer granules were applied to the series of 710 mm × 360 mm model pervious pavement structure except the controls. Rainfall intensity of 7.4 mm/h was applied to the test models at the rate of 3 events per week. Analysis of the recycled water showed that PPS has the capability to recycle stormwater to a quality that meets the chemical standards for use in agricultural irrigation irrespective of the type of sub-base used. There is a potential benefit of nutrient availability in recycled water for plants, but care should be taken not to dispose of this water in natural water courses as it might result in eutrophication problems.

  2. Development and pilot test of an intensive municipal solid waste recycling system for the Town of East Hampton

    SciTech Connect

    Commoner, B.; Frisch, M.; Pitot, H.A.; Quigley, J.; Stege, A.; Wallace, D.; Webster, T.

    1990-02-01

    This report presents the results of a project to design and test a new type of trash disposal system for the Town of East Hampton, Long Island: the Intensive Recycling System. The system is intended to serve as the Town's primary means of regular trash disposal. The Intensive Recycling System is based on separation of regular trash, by household and commercial establishments, into four fractions: (1) food garbage and soiled paper; (2) paper/cardboard; (3) metal cans/glass bottles; (4) non-recyclables. Fraction 1, together with yard waste, is processed at a compost facility, yielding marketable compost. Fractions 2 and 3 are processed by a materials recovery facility (MRF) into marketable products: several grades of paper and cardboard; aluminum cans; tin cans; scrap metal; and color-sorted crushed glass (cullet). The non-recyclable components (fraction 4) and misclassified components rejected during processing are consigned to a landfill. This document is Volume 2 of two volumes and contains the appendix for Volume 1.

  3. Development and pilot test of an intensive municipal solid waste recycling system for the Town of East Hampton

    SciTech Connect

    Commoner, B.; Frisch, M.; Pitot, H.A.; Quigley, J.; Stege, A.; Wallace, D.; Webster, T.

    1990-02-01

    This report presents the results of a project to design and test a new type of trash disposal system for the Town of East Hampton, Long Island: the Intensive Recycling System. The system is intended to serve as the Town's primary means of regular trash disposal. The Intensive Recycling System is based on separation of regular trash, by households and commercial establishments, into four fractions: (1) food garbage and soiled paper; (2) paper/cardboard; (3) metal cans/glass bottles; (4) non-recyclables. Fraction 1, together with yard waste, is processed at a compost facility, yielding marketable compost. Fractions 2 and 3 are processed by a materials recovery facility (MRF) into marketable products: several grades of paper and cardboard; aluminum cans; tin cans; scrap metal; and color-sorted crushed glass (cullet). The non-recyclable components (fraction 4) and misclassified components rejected during processing are consigned to a landfill. This document is Volume 1 of two volumes. 75 refs., 24 figs., 81 tabs.

  4. Multi-Material Recycling Manual. The Keep America Beautiful System. Revised Edition.

    ERIC Educational Resources Information Center

    1987

    Solid waste management ranks third after schools and roads in most municipal budgets in the United States. Maximizing the separation of recyclable materials that can be reused may offer the highest priority and best use of our waste and should receive high priority in a solid waste management plan. This manual deals with the recycling of material…

  5. Reverse logistics system and recycling potential at a landfill: A case study from Kampala City

    SciTech Connect

    Kinobe, J.R.; Gebresenbet, G.; Niwagaba, C.B.; Vinnerås, B.

    2015-08-15

    Highlights: • Quantifies the different waste streams delivered at the landfill. • Evaluates the amount of potential waste products that enters into the reverse cycle. • Drawing out the reverse logistics activities from Kampala City to Kiteezi landfill. • Identify the storage, collection and transportation mechanisms of products to the various destinations; and finally. • The study suggests efficient measures to improve reverse logistics system. - Abstract: The rapid growing population and high urbanisation rates in Sub-Saharan Africa has caused enormous pressure on collection services of the generated waste in the urban areas. This has put a burden on landfilling, which is the major waste disposal method. Waste reduction, re-use and recycling opportunities exist but are not fully utilized. The common items that are re-used and re-cycled are plastics, paper, aluminum, glass, steel, cardboard, and yard waste. This paper develops an overview of reverse logistics at Kiteezi landfill, the only officially recognised waste disposal facility for Kampala City. The paper analyses, in details the collection, re-processing, re-distribution and final markets of these products into a reversed supply chain network. Only 14% of the products at Kiteezi landfill are channeled into the reverse chain while 63% could be included in the distribution chain but are left out and disposed of while the remaining 23% is buried. This is because of the low processing power available, lack of market value, lack of knowledge and limited value addition activities to the products. This paper proposes possible strategies of efficient and effective reverse logistics development, applicable to Kampala City and other similar cities.

  6. New heterocycle modified chitosan adsorbent for metal ions (II) removal from aqueous systems.

    PubMed

    Kandile, Nadia G; Mohamed, Hemat M; Mohamed, Mansoura I

    2015-01-01

    A new hydrogel based on a modified chitosan CS-B was synthesized and evaluated for its metal ion removal from aqueous systems. The CS-B hydrogel was prepared through modification of chitosan with 4-((1, 3-dioxoisoindolin-2-ylimino) methyl) benzaldehyde as a heterocyclic component. The new hydrogel was analyzed by diverse techniques such as FTIR, XRD, TGA, SEM, and swelling tests. The adsorption capacity of CS-B for metal ions Co(2+), Hg(2+), Cu(2+), Zn(2+), and Pb(2+) from aqueous systems at different pH values showed various levels of efficiency. The metal ion uptake data over a range of pH values for Co(2+) and Hg(2+) showed the highest adsorption capacity while Cu(2+), Zn(2+), and Pb(2+) showed moderate adsorption capacity. Selective metal ion efficiency was highest for Co(2+) and lowest for Hg(2+) in their binary mixture.

  7. Time-resolved spectroscopy at surfaces and adsorbate dynamics: Insights from a model-system approach

    NASA Astrophysics Data System (ADS)

    Boström, Emil; Mikkelsen, Anders; Verdozzi, Claudio

    2016-05-01

    We introduce a model description of femtosecond laser induced desorption at surfaces. The substrate part of the system is taken into account as a (possibly semi-infinite) linear chain. Here, being especially interested in the early stages of dissociation, we consider a finite-size implementation of the model (i.e., a finite substrate), for which an exact numerical solution is possible. By time-evolving the many-body wave function, and also using results from a time-dependent density functional theory description for electron-nuclear systems, we analyze the competition between several surface-response mechanisms and electronic correlations in the transient and longer time dynamics under the influence of dipole-coupled fields. Our model allows us to explore how coherent multiple-pulse protocols can impact desorption in a variety of prototypical experiments.

  8. Adsorbate-Induced Segregation in a PdAg Membrane Model System: Pd3Ag(1 1 1)

    SciTech Connect

    Svenum, I. H.; Herron, Jeffrey A.; Mavrikakis, Manos; Venvik, H. J.

    2012-10-15

    Thin PdAg alloy membranes with 20–25% Ag are being developed for hydrogen separation technology. Despite many investigations on such membranes as well as representative experimental and theoretical model systems, unresolved issues remain concerning the effect of the alloy surface structure and composition on adsorption and vice versa. Therefore, the interaction between hydrogen, carbon monoxide or oxygen with the surface of a PdAg model alloy was studied using periodic self-consistent density functional theory (DFT-GGA) calculations. In particular, the adsorption structure, coverage dependence and possible adsorption-induced segregation phenomena were addressed using Pd3Ag(1 1 1) model surfaces with varying degrees of surface segregation. In agreement with previous experimental and theoretical investigations, we predict Ag surface termination to be energetically favorable in vacuum. The segregation of Ag is then reversed upon adsorption of H, CO or O. For these adsorbates, the binding is strongest on Pd three-fold hollow sites, and hence complete Pd termination is favored at high coverage of H or CO, while 25% Ag may remain under oxygen because of the lower O-saturation coverage. CO adsorption provides a somewhat stronger driving force for Pd segregation when compared to H, and this may have implications with respect to permeation properties of PdAg alloy surfaces. Our predictions for high coverage are particularly relevant in underlining the importance of segregation phenomena to the hydrogen transport properties of thin PdAg alloy membranes.

  9. Layout optimization methodology of piezoelectric transducers in energy-recycling semi-active vibration control systems

    NASA Astrophysics Data System (ADS)

    Takezawa, Akihiro; Makihara, Kanjuro; Kogiso, Nozomu; Kitamura, Mitsuru

    2014-01-01

    An optimization methodology is proposed for the piezoelectric transducer (PZT) layout of an energy-recycling semi-active vibration control (ERSAVC) system for a space structure composed of trusses. Based on numerical optimization techniques, we intend to generate optimal location of PZTs under the constraint for the total length of PZTs. The design variables are set as the length of the PZT on each truss based on the concept of the ground structure approach. The transient problems of the mechanical and electrical vibrations based on the ERSAVC theory are considered as the equations of state. The objective is to minimize the integration of the square of all displacement over the whole analysis time domain. The sensitivity of the objective function is derived based on the adjoint variable method. Based on these formulations, an optimization algorithm is constructed using the fourth-order Runge-Kutta method and the method of moving asymptotes. Numerical examples are provided to illustrate the validity and utility of the proposed methodology. Using the proposed methodology, the optimal location of PZTs for the vibration suppression for multi-modal vibration is studied, which can be benchmark results of further study in the context of ERSAVC systems.

  10. Feasibility of recycling thorium in a fusion-fission hybrid/PWR symbiotic system

    SciTech Connect

    Josephs, J. M.

    1980-12-31

    A study was made of the economic impact of high levels of radioactivity in the thorium fuel cycle. The sources of this radioactivity and means of calculating the radioactive levels at various stages in the fuel cycle are discussed and estimates of expected levels are given. The feasibility of various methods of recycling thorium is discussed. These methods include direct recycle, recycle after storage for 14 years to allow radioactivity to decrease, shortening irradiation times to limit radioactivity build up, and the use of the window in time immediately after reprocessing where radioactivity levels are diminished. An economic comparison is made for the first two methods together with the throwaway option where thorium is not recycled using a mass energy flow model developed for a CTHR (Commercial Tokamak Hybrid Reactor), a fusion-fission hybrid reactor which serves as fuel producer for several PWR reactors.

  11. Internal recycle to improve denitrification in a step feed anoxic/aerobic activated sludge system.

    PubMed

    Boyle, C A; McKenzie, C J; Morgan, S

    2009-01-01

    During periods of low load (weekends and holidays) the Mangere wastewater treatment plant effluent has breached the summer consent conditions for total nitrogen. The purpose of this research was to determine if an internal recycle would improve nitrogen removal in the anoxic/aerobic activated sludge reactors sufficient to meet the summer resource consent standard. The recycle returned nitrate rich mixed liquor from the downstream aerobic zone back to the initial anoxic zone, thus potentially improving denitrification. A full scale trial showed that installation of the internal recycle on each RC would have satisfied the resource consent for total nitrogen in most cases over the three summer resource consent periods since the upgrade. However, further modifications of the internal recycle would be required to ensure that consent conditions were satisfied at all times and to improve the consistency of the results.

  12. Addition of Molecular Adsorbent Recirculating System (MARS®) Albumin Dialysis for the Preoperative Management of Jaundiced Patients with Hilar Cholangiocarcinoma

    PubMed Central

    Regimbeau, Jean-Marc; Fuks, David; Chapuis-Roux, Emilie; Yzet, Thierry; Cosse, Cyril; Bartoli, Eric; N'Guyen-Khac, Eric; Robert, Brice; Lobjoie, Eric

    2013-01-01

    The preoperative management of hilar cholangiocarcinoma (HC) with jaundice focuses on decreasing the total serum bilirubin level (SBL) by performing preoperative biliary drainage (PBD). However, it takes about 6–8 weeks for the SBL to fall at a sufficient extent. The objective of this preliminary study was to evaluate the impact of Molecular Adsorbent Recirculating System (MARS®) dialysis (in association with PBD) on SBL decrease. From January 2010 to January 2011, we prospectively selected all jaundiced patients admitted to our university hospital for resectable HC and requiring PBD prior to major hepatectomy. The PBD was followed by 3 sessions of MARS dialysis over a period of 72 h. A total of 10 patients with HC were screened and two of them were included (Bismuth-Corlette stage IIIa, gender ratio 1, median age 68 years). The initial SBL in the two patients was 328 and 242 μmol/l, respectively. After three MARS dialysis sessions, the SBL had fallen by 30 and 52%, respectively. After the end of each session, there was a SBL rebound of about 10 μmol/l. The MARS decreased the serum creatinine level, the platelet count and the prothrombin index, but did not modify the serum albumin level. Pruritus disappeared after one and two sessions, respectively. MARS-related morbidity included hypotension (n = 1), tachycardia (n = 1), thrombocytopenia (n = 2) and anaemia (n = 1). When combined with PBD, MARS dialysis appears to accelerate the decrease in SBL and thus may enable earlier surgery. This hypothesis must be validated in a larger study. PMID:24163652

  13. Detoxification of phytotoxic compounds by TiO2 photocatalysis in a recycling hydroponic cultivation system of asparagus.

    PubMed

    Sunada, Kayano; Ding, Xin Geng; Utami, Melia Sandya; Kawashima, Yoko; Miyama, Yoko; Hashimoto, Kazuhito

    2008-06-25

    TiO 2 photocatalytic decomposition and detoxification of phytotoxic compounds released by the roots of asparagus ( Asparagus officinalis L.) were investigated from the viewpoint of conservation-oriented cultivation. The phytotoxically active fraction was extracted either from dried asparagus roots or from the recycled nutrient solution of an asparagus hydroponic cultivation system. We found that the phytotoxic activity gradually decreased in the fraction with TiO 2 powder under irradiation with ultraviolet (UV) light at an intensity of 1.0 mW/cm (2). The growth of asparagus plants under actual cultivation conditions was also investigated by comparing asparagus grown in a hydroponic system where recycled waste nutrient solution was photocatalytically treated with solar light and a system with untreated recycled waste nutrient solution. The results showed, as measured by growth indices such as stem length and stem thickness, that asparagus growth in the photocatalytically treated system was superior to the untreated one. Furthermore, the yield of asparagus spears was 1.6-fold greater in the photocatalytically treated system, demonstrating the detoxification effect on the phytotoxic compounds and also the killing effect on pathogenic microorganisms.

  14. Detoxification of phytotoxic compounds by TiO2 photocatalysis in a recycling hydroponic cultivation system of asparagus.

    PubMed

    Sunada, Kayano; Ding, Xin Geng; Utami, Melia Sandya; Kawashima, Yoko; Miyama, Yoko; Hashimoto, Kazuhito

    2008-06-25

    TiO 2 photocatalytic decomposition and detoxification of phytotoxic compounds released by the roots of asparagus ( Asparagus officinalis L.) were investigated from the viewpoint of conservation-oriented cultivation. The phytotoxically active fraction was extracted either from dried asparagus roots or from the recycled nutrient solution of an asparagus hydroponic cultivation system. We found that the phytotoxic activity gradually decreased in the fraction with TiO 2 powder under irradiation with ultraviolet (UV) light at an intensity of 1.0 mW/cm (2). The growth of asparagus plants under actual cultivation conditions was also investigated by comparing asparagus grown in a hydroponic system where recycled waste nutrient solution was photocatalytically treated with solar light and a system with untreated recycled waste nutrient solution. The results showed, as measured by growth indices such as stem length and stem thickness, that asparagus growth in the photocatalytically treated system was superior to the untreated one. Furthermore, the yield of asparagus spears was 1.6-fold greater in the photocatalytically treated system, demonstrating the detoxification effect on the phytotoxic compounds and also the killing effect on pathogenic microorganisms. PMID:18500814

  15. Chemical activation in view of MSWI bottom ash recycling in cement-based systems.

    PubMed

    Polettini, A; Pomi, R; Fortuna, E

    2009-03-15

    In the present study, the feasibility of recycling incinerator bottom ash in cementitious systems by means of chemical activation was investigated. Different Na-, K- and Ca-based hydroxides and salts were selected for the experiments on the basis of their recognized effects on activation of typical pozzolanic materials. The evolution of mechanical properties of bottom ash/Portland cement mixtures and the leaching of trace metals from the materials were a matter of major concern. The experiments were arranged according to a full factorial design, which also allowed to derive a predictive model for unconfined compressive strength as affected by bottom ash content as well as activator type and dosage. Among the activators tested, calcium chloride was found to affect mechanical strength far more positively than the other species used, at the same time ensuring low metal release from the material. On the other hand, the use of potassium sulfate was observed to cause a significant increase in metal leaching at pH<12, which was probably associated to the release of contaminants initially immobilized within the structure of ettringite as soon as it converted into monosulfate over time. PMID:18632208

  16. Origin, utilization, and recycling of nucleosides in the central nervous system.

    PubMed

    Ipata, Piero Luigi

    2011-12-01

    The brain relies on the salvage of preformed purine and pyrimidine rings, mainly in the form of nucleosides, to maintain its nucleotide pool in the proper qualitative and quantitative balance. The transport of nucleosides from blood into neurons and glia is considered to be an essential prerequisite to enter their metabolic utilization in the brain. Recent lines of evidence have also suggested that local extracellular nucleoside triphosphate (NTP) degradation may contribute to brain nucleosides. Plasma membrane-located ectonucleotidases, with their active sites oriented toward the extracellular space, catalyze the successive hydrolysis of NTPs to their respective nucleosides. Apart from the well-established modulation of ATP, ADP, adenosine (the purinergic agonists), UTP, and UDP (the pyrimidinergic agonists) availability at their respective receptors, ectonucleotidases may also serve the local reutilization of nucleosides in the brain. After their production in the extracellular space by the ectonucleotidase system, nucleosides are transported into neurons and glia and converted back to NTPs via a set of purine and pyrimidine salvage enzymes. Finally, nucleotides are transported into brain cell vescicles or granules and released back into the extracellular space. The key teaching concepts to be included in a two-to three-lecture block on the molecular mechanisms of the local nucleoside recycling process, based on a cross talk between the brain extracellular space and cytosol, are discussed in this article. PMID:22139768

  17. Comparative study of wastewater treatment and nutrient recycle via activated sludge, microalgae and combination systems.

    PubMed

    Wang, Liang; Liu, Jinli; Zhao, Quanyu; Wei, Wei; Sun, Yuhan

    2016-07-01

    Algal-bacterial synergistic cultivation could be an optional wastewater treatment technology in temperate areas. In this study, a locally screened vigorous Chlorella strain was characterized and then it was used in a comparative study of wastewater treatment and nutrient recycle assessment via activated sludge (AS), microalgae and their combination systems. Chlorella sp. cultured with AS in light showed the best performance, in which case the removal efficiencies of COD, NH3-N and TP were 87.3%, 99.2% and 83.9%, respectively, within a short period of 1day. Algal-bacterial combination in light had the best settleability. Chlorella sp. contained biomass, could be processed to feed, fertilizer or fuel due to the improved quality (higher C/H/N) compared with sludge. PCR-DGGE analysis shows that two types of rhizobacteria, namely, Pseudomonas putida and Flavobacterium hauense were enriched in sludge when cultured with algae in light, serving as the basics for artificial consortium construction for improved wastewater treatment.

  18. A global, comprehensive review of literature related to paper recycling: A pressing need for a uniform system of terms and definitions.

    PubMed

    Ervasti, Ilpo; Miranda, Ruben; Kauranen, Ilkka

    2016-02-01

    A global, comprehensive review of terms and definitions related to paper recycling was conducted in this article. Terms and definitions related to paper recycling have varied in the course of time. Different terms and different definitions for the same thing are being used in different geographical regions and by different organizations. Definitions are different based on varying conceptions of waste paper as a raw material. Definitions of how to make various calculations related to paper recycling activity are inconsistent. Even such fundamental basic definitions like how to calculate recycling rate and paper consumption are not uniform. It could be concluded that there is no uniform system of terms and definitions related to paper recycling and the implications of this deficiency are profound. For example, it is difficult to reliably compare with each other statistics from different times and from different geographical regions. It is not possible to measure if targets for recycling activities are met if the terms describing the targets are not uniformly defined. In cases of reporting data for recycling targets, the lack of uniform terminology can, for example, impede the necessary transparency between different stakeholders and may allow for deception. The authors conclude there is a pressing need to develop a uniform system of terms and definition for terms related to paper recycling.

  19. A global, comprehensive review of literature related to paper recycling: A pressing need for a uniform system of terms and definitions.

    PubMed

    Ervasti, Ilpo; Miranda, Ruben; Kauranen, Ilkka

    2016-02-01

    A global, comprehensive review of terms and definitions related to paper recycling was conducted in this article. Terms and definitions related to paper recycling have varied in the course of time. Different terms and different definitions for the same thing are being used in different geographical regions and by different organizations. Definitions are different based on varying conceptions of waste paper as a raw material. Definitions of how to make various calculations related to paper recycling activity are inconsistent. Even such fundamental basic definitions like how to calculate recycling rate and paper consumption are not uniform. It could be concluded that there is no uniform system of terms and definitions related to paper recycling and the implications of this deficiency are profound. For example, it is difficult to reliably compare with each other statistics from different times and from different geographical regions. It is not possible to measure if targets for recycling activities are met if the terms describing the targets are not uniformly defined. In cases of reporting data for recycling targets, the lack of uniform terminology can, for example, impede the necessary transparency between different stakeholders and may allow for deception. The authors conclude there is a pressing need to develop a uniform system of terms and definition for terms related to paper recycling. PMID:26619933

  20. Recycling as a strategy against rare earth element criticality: a systemic evaluation of the potential yield of NdFeB magnet recycling.

    PubMed

    Rademaker, Jelle H; Kleijn, René; Yang, Yongxiang

    2013-09-17

    End-of-life recycling is promoted by OECD countries as a promising strategy in the current global supply crisis surrounding rare earth elements (REEs) so that dependence on China, the dominant supplier, can be decreased. So far the feasibility and potential yield of REE recycling has not been systematically evaluated. This paper estimates the annual waste flows of neodymium and dysprosium from permanent magnets, the main deployment of these critical REEs, during the 2011-2030 period. The estimates focus on three key permanent magnet waste flows: wind turbines, hybrid and electric vehicles, and hard disk drives (HDDs) in personal computers (PCs). This is a good indication of the end-of-life recycling of neodymium and dysprosium maximum potential yield. Results show that for some time to come, waste flows from permanent magnets will remain small relative to the rapidly growing global REE demand. Policymakers therefore need to be aware that during the next decade recycling is unlikely to substantially contribute to global REE supply security. In the long term, waste flows will increase sharply and will meet a substantial part of the total demand for these metals. Future REE recycling efforts should, therefore, focus on the development of recycling technology and infrastructure.

  1. Recycled pulsars

    NASA Astrophysics Data System (ADS)

    Jacoby, Bryan Anthony

    2005-11-01

    In a survey of ~4,150 square degrees, we discovered 26 previously unknown pulsars, including 7 "recycled" millisecond or binary pulsars. The most significant discovery of this survey is PSR J1909-3744, a 2.95 ms pulsar in an extremely circular 1.5 d orbit with a low-mass white dwarf companion. Though this system is a fairly typical low-mass binary pulsar (LMBP) system, it has several exceptional qualities: an extremely narrow pulse profile and stable rotation have enabled the most precise long-term timing ever reported, and a nearly edge-on orbit gives rise to a strong Shapiro delay which has allowed the most precise measurement of the mass of a millisecond pulsar: m p = (1.438 +/- 0.024) [Special characters omitted.] . Our accurate parallax distance measurement, d p = ([Special characters omitted.] ) kpc, combined with the mass of the optically-detected companion, m c = (0.2038 +/- 0.022) [Special characters omitted.] , will provide an important calibration for white dwarf models relevant to other LMBP companions. We have detected optical counterparts for two intermediate mass binary pulsar (IMBP) systems; taken together with optical detections and non-detections of several similar systems, our results indicate that the characteristic age t = c P /2 P consistently overestimates the time since the end of mass accretion in these recycled systems. We have measured orbital decay in the double neutron star system PSR B2127+11C in the globular cluster M15. This has allowed an improved measurement of the mass of the pulsar, m p = (1.3584 +/- 0.0097) [Special characters omitted.] , and companion, m c = (1.3544 +/- 0.0097) [Special characters omitted.] , as well as a test of general relativity at the 3% level. We find that the proper motions of this pulsar as well as PSR B2127+11A and PSR B2127+11B are consistent with each other and with one published measurement of the cluster proper motion. We have discovered three binary millisecond pulsars in the globular cluster M62

  2. Unique Inflammatory Mediators and Specific IgE Levels Distinguish Local from Systemic Reactions after Anthrax Vaccine Adsorbed Vaccination.

    PubMed

    Garman, Lori; Smith, Kenneth; Muns, Emily E; Velte, Cathy A; Spooner, Christina E; Munroe, Melissa E; Farris, A Darise; Nelson, Michael R; Engler, Renata J M; James, Judith A

    2016-08-01

    Although the U.S. National Academy of Sciences concluded that anthrax vaccine adsorbed (AVA) has an adverse event (AE) profile similar to those of other adult vaccines, 30 to 70% of queried AVA vaccinees report AEs. AEs appear to be correlated with certain demographic factors, but the underlying immunologic pathways are poorly understood. We evaluated a cohort of 2,421 AVA vaccinees and found 153 (6.3%) reported an AE. Females were more likely to experience AEs (odds ratio [OR] = 6.0 [95% confidence interval {CI} = 4.2 to 8.7]; P < 0.0001). Individuals 18 to 29 years of age were less likely to report an AE than individuals aged 30 years or older (OR = 0.31 [95% CI = 0.22 to 0.43]; P < 0.0001). No significant effects were observed for African, European, Hispanic, American Indian, or Asian ancestry after correcting for age and sex. Additionally, 103 AEs were large local reactions (LLRs), whereas 53 AEs were systemic reactions (SRs). In a subset of our cohort vaccinated 2 to 12 months prior to plasma sample collection (n = 75), individuals with LLRs (n = 33) had higher protective-antigen (PA)-specific IgE levels than matched, unaffected vaccinated individuals (n = 50; P < 0.01). Anti-PA IgE was not associated with total plasma IgE, hepatitis B-specific IgE, or anti-PA IgG in individuals who reported an AE or in matched, unaffected AVA-vaccinated individuals. IP-10 was also elevated in sera of individuals who developed LLRs (P < 0.05). Individuals reporting SRs had higher levels of systemic inflammation as measured from C-reactive protein (P < 0.01). Thus, LLRs and SRs are mediated by distinct pathways. LLRs are associated with a vaccine-specific IgE response and IP-10, whereas SRs demonstrate increased systemic inflammation without a skewed cytokine profile. PMID:27280620

  3. Plant growth and mineral recycle trade-offs in different scenarios for a CELSS. [Closed Ecological Life Support System

    NASA Technical Reports Server (NTRS)

    Ballou, E. V.; Wydeven, T.; Spitze, L. A.

    1982-01-01

    Data for hydroponic plant growth in a manned system test is combined with nutritional recommendations to suport trade-off calculations for closed and partially closed life support system scenarios. Published data are used as guidelines for the masses of mineral nutrients needed for higher plant production. The results of calculations based on various scenarios are presented for various combinations of plant growth chamber utilization and fraction of mineral recycle. Estimates are made of the masses of material needed to meet human nutritional requirements in the various scenarios. It appears that food production from a plant growth chamber with mineral recycle is favorable to reduction of the total launch weight in missions exceeding 3 years.

  4. Hydrogen Purification and Recycling for an Integrated Oxygen Recovery System Architecture

    NASA Technical Reports Server (NTRS)

    Abney, Morgan B.; Greenwood, Zachary; Wall, Terry; Nur, Mononita; Wheeler, Richard R., Jr.; Preston, Joshua; Molter, Trent

    2016-01-01

    The United States Atmosphere Revitalization life support system on the International Space Station (ISS) performs several services for the crew including oxygen generation, trace contaminant control, carbon dioxide (CO2) removal, and oxygen recovery. Oxygen recovery is performed using a Sabatier reactor developed by Hamilton Sundstrand, wherein CO2 is reduced with hydrogen in a catalytic reactor to produce methane and water. The water product is purified in the Water Purification Assembly and recycled to the Oxygen Generation Assembly (OGA) to provide O2 to the crew. This architecture results in a theoretical maximum oxygen recovery from CO2 of approx.54% due to the loss of reactant hydrogen in Sabatier-produced methane that is currently vented outside of ISS. Plasma Pyrolysis Assembly (PPA) technology, developed by Umpqua Research Company, provides the capability to further close the Atmosphere Revitalization oxygen loop by recovering hydrogen from Sabatier-produced methane. A key aspect of this technology approach is the need to purify the hydrogen from the PPA product stream which includes acetylene, unreacted methane and byproduct water and carbon monoxide. In 2015, four sub-scale hydrogen separation systems were delivered to NASA for evaluation. These included two electrolysis single-cell hydrogen purification cell stacks developed by Sustainable Innovations, LLC, a sorbent-based hydrogen purification unit using microwave power for sorbent regeneration developed by Umpqua Research Company, and a LaNi4.6Sn0.4 metal hydride produced by Hydrogen Consultants, Inc. Here we report the results of these evaluations to-date, discuss potential architecture options, and propose future work.

  5. Hydrogen Purification and Recycling for an Integrated Oxygen Recovery System Architecture

    NASA Technical Reports Server (NTRS)

    Abney, Morgan B.; Greenwood, Zachary; Wall, Terry; Miller, Lee; Wheeler, Ray

    2016-01-01

    The United States Atmosphere Revitalization life support system on the International Space Station (ISS) performs several services for the crew including oxygen generation, trace contaminant control, carbon dioxide (CO2) removal, and oxygen recovery. Oxygen recovery is performed using a Sabatier reactor developed by Hamilton Sundstrand, wherein CO2 is reduced with hydrogen in a catalytic reactor to produce methane and water. The water product is purified in the Water Purification Assembly and recycled to the Oxygen Generation Assembly (OGA) to provide O2 to the crew. This architecture results in a theoretical maximum oxygen recovery from CO2 of approximately 54% due to the loss of reactant hydrogen in Sabatier-produced methane that is currently vented outside of ISS. Plasma Methane Pyrolysis technology (PPA), developed by Umpqua Research Company, provides the capability to further close the Atmosphere Revitalization oxygen loop by recovering hydrogen from Sabatier-produced methane. A key aspect of this technology approach is to purify the hydrogen from the PPA product stream which includes acetylene, unreacted methane and byproduct water and carbon monoxide. In 2015, four sub-scale hydrogen separation systems were delivered to NASA for evaluation. These included two electrolysis single-cell hydrogen purification cell stacks developed by Sustainable Innovations, LLC, a sorbent-based hydrogen purification unit using microwave power for sorbent regeneration developed by Umpqua Research Company, and a LaNi4.6Sn0.4 metal hydride produced by Hydrogen Consultants, Inc. Here we report the results of these evaluations, discuss potential architecture options, and propose future work.

  6. Cold in-place recycling characterization framework for single or multiple component binder systems

    NASA Astrophysics Data System (ADS)

    Cox, Benjamin C.

    Cold in-place recycling (CIR) is a pavement rehabilitation technique which has gained momentum in recent years. This momentum is due partly to its economic and sustainability characteristics, which has led to CIR market expansion. When pavement network deterioration is considered alongside increasing material costs, it is not beyond reason to expect demands on CIR to continue to increase. Historically, single component binder (SCB) systems, those with one stabilization binder (or two if the secondary binder dosage is 1% or less), have dominated the CIR market and could be considered the general state of practice. Common stabilization binders are either bituminous or cementitious. Two example SCB systems would be: 1) 3% portland cement, or 2) 3% asphalt emulsion with 1% hydrated lime. While traditional SCB systems have demonstrated positive economic and sustainability impacts, this dissertation focuses on multiple component binder (MCB) systems (bituminous and cementitious combined) which exhibit the potential to provide better overall economics and performance. Use of MCBs has the potential to alleviate SCB issues to some extent (e.g. cracking with cementitious SCBs, rutting with bituminous SCBs). Furthermore, to fairly represent both binders in an MCB system a universal design method which can accommodate multiple binder types is needed. The main objectives of this dissertation are to develop a universal CIR design framework and, using this framework, characterize multiple SCB and MCB systems. Approximately 1500 CIR specimens were tested herein along with approximately 300 asphalt concrete specimens which serve as a reference data set for CIR characterization. A case study of a high-traffic Mississippi CIR project which included cement SCB and emulsion SCB sections is also presented to support laboratory efforts. Individual components needed to comprise a universal design framework, such as curing protocols, were developed. SCB and MCB characterization indicated

  7. A visible-light harvesting system for CO2 reduction using a Ru(II) -Re(I) photocatalyst adsorbed in mesoporous organosilica.

    PubMed

    Ueda, Yutaro; Takeda, Hiroyuki; Yui, Tatsuto; Koike, Kazuhide; Goto, Yasutomo; Inagaki, Shinji; Ishitani, Osamu

    2015-02-01

    A photocatalytic system for CO2 reduction exhibiting visible-light harvesting was developed by preparing a hybrid consisting of a supramolecular metal complex as photocatalyst and periodic mesoporous organosilica (PMO) as light harvester. A Ru(II) Re(I) binuclear complex (RuRe) with methylphosphonic acid anchor groups was adsorbed on acridone or methylacridone embedded in the walls of PMO mesochannels to yield the hybrid structure. The embedded organic groups absorbed visible light, and the excitation energy was funneled to the Ru units. The energy accumulation was followed by electron transfer and catalytic reduction of CO2 to CO on the Re unit. The light harvesting of these hybrids enhanced the photocatalytic CO evolution rate by a factor of up to ten compared with that of RuRe adsorbed on mesoporous silica without a light harvester. PMID:25524162

  8. Protic acid immobilized on solid support as an extremely efficient recyclable catalyst system for a direct and atom economical esterification of carboxylic acids with alcohols.

    PubMed

    Chakraborti, Asit K; Singh, Bavneet; Chankeshwara, Sunay V; Patel, Alpesh R

    2009-08-21

    A convenient and clean procedure of esterification is reported by direct condensation of equimolar amounts of carboxylic acids with alcohols catalyzed by an easy to prepare catalyst system of perchloric acid immobilized on silica gel (HClO(4)-SiO(2)). The direct condensation of aryl, heteroaryl, styryl, aryl alkyl, alkyl, cycloalkyl, and long-chain aliphatic carboxylic acids with primary/secondary alkyl/cycloalkyl, allyl, propargyl, and long-chain aliphatic alcohols has been achieved to afford the corresponding esters in excellent yields. Chiral alcohol and N-t-Boc protected chiral amino acid also resulted in ester formation with the representative carboxylic acid or alcohol without competitive N-t-Boc deprotection and detrimental effect on the optical purity of the product demonstrating the mildness and chemoselectivity of the procedure. The esters of long-chain (>C(10)) acids and alcohols are obtained in high yields. The catalyst is recovered and recycled without significant loss of activity. The industrial application of the esterification process is demonstrated by the synthesis of prodrugs of ibuprofen and a few commercial flavoring agents. Other protic acids such as H(2)SO(4), HBr, TfOH, HBF(4), and TFA that were adsorbed on silica gel were less effective compared to HClO(4)-SiO(2) following the order HClO(4)-SiO(2) > H(2)SO(4)-SiO(2) > HBr-SiO(2) > TfOH-SiO(2) > HBF(4)-SiO(2) approximately TFA-SiO(2). When HClO(4) was immobilized on other solid supports the catalytic efficiency followed the order HClO(4)-SiO(2) > HClO(4)-K10 > HClO(4)-Al(2)O(3) (neutral) > HClO(4)-Al(2)O(3) (acidic) > HClO(4)-Al(2)O(3) (basic).

  9. Asymmetric hydrogenation of aromatic ketones by new recyclable ionic tagged ferrocene-ruthenium catalyst system.

    PubMed

    Xu, Di; Zhou, Zhi-Ming; Dai, Li; Tang, Li-Wei; Zhang, Jun

    2015-05-01

    Newly developed ferrocene-oxazoline-phosphine ligands containing quaternary ammonium ionic groups exhibited excellent catalytic performance for the ruthenium-catalyzed hydrogenation of aromatic ketonic substrates to give chiral secondary alcohols with high levels of conversions and enantioselectivities. Simple manipulation process, water tolerance, high activity and good recyclable property make this catalysis practical and appealing.

  10. ETV REPORT: AND STATEMENT: HYDROMATIX 786E ION EXCHANGE RINSEWATER RECYCLING SYSTEM

    EPA Science Inventory

    RPA's ETV Program, through the NRMRL, has partnered with the California Dept. of Toxic Substances Contol (DTSCO) under an ETV Pilot to verify pollution prevention, recycling, and waste treatment technologies. This report provides a verification of performance results for the Hydr...

  11. Feasibility of recycling thorium in a fusion-fission hybrid/PWR symbiotic system

    SciTech Connect

    Josephs, J.M.

    1980-12-31

    A study was made of the economic impact of high levels of radioactivity in the thorium fuel cycle. The sources of this radioactivity and means of calculating the radioactive levels at various stages in the fuel cycle are discussed and estimates of expected levels are given. The feasibility of various methods of recycling thorium is discussed. These methods include direct recycle, recycle after storage for 14 years to allow radioactivity to decrease, shortening irradiation times to limit radioactivity build up, and the use of the window in time immediately after reprocessing where radioactivity levels are diminished. An economic comparison is made for the first two methods together with the throwaway option where thorium is not recycled using a mass energy flow model developed for a CTHR (Commercial Tokamak Hybrid Reactor), a fusion fission hybrid reactor which serves as fuel producer for several PWR reactors. The storage option is found to be most favorable; however, even this option represents a significant economic impact due to radioactivity of 0.074 mills/kW-h which amounts to $4 x 10/sup 9/ over a 30 year period assuming a 200 gigawatt supply of electrical power.

  12. Solid earth as a recycling systems and the lateral growth of Precambrian North America

    NASA Technical Reports Server (NTRS)

    Veizer, Jan

    1988-01-01

    If plotted on mass vs time diagrams, geologic entities (for example, continental and oceanic crust, sediments, and mineral resources) display an exponential (power law) relationship, with entity per unit time increasing toward the present. This relationship is consistent with the concept of recycling and can be simulated mathematically. The approach is based on the plate tectonic theory and considers area-age or mass-age distributions of crystalline basement and sediments for major global tectonic realms. Each tectonic realm is characterized by a specific lifespan, which is an inverse function of its recycling rate. The estimated average half-area of half-mass ages are given. The corresponding parameters for continental crust are 690 Ma for K/Ar, and approximately 1200 Ma for Rb/St and U-Th/Pb dating pairs. Tectonic diversity preserved in the geologic record is therefore a function of time, with oceanic tectonic realms, because of their rapid recycling, underrepresented in the rocks older than approximately 300 Ma. The Sm/Nd isotopic systematic of sediments suggest that, for a near steady-state post-Archean sedimentary mass, recycling is approximately 90 + or - 5 percent cannibalistic. This yields an estimated upper limit on crust-mantle exchange via sediment subduction of approximately 1.1 + or - 0.5 x 10 g a(sup -1) considerably less than demanded by isotopic constraints. The discrepancy may indicate the existence of additional loci, such as orogenic belts, for significant crust-mantle interaction.

  13. Solid earth as a recycling systems and the lateral growth of Precambrian North America

    NASA Astrophysics Data System (ADS)

    Veizer, Jan

    If plotted on mass vs time diagrams, geologic entities (for example, continental and oceanic crust, sediments, and mineral resources) display an exponential (power law) relationship, with entity per unit time increasing toward the present. This relationship is consistent with the concept of recycling and can be simulated mathematically. The approach is based on the plate tectonic theory and considers area-age or mass-age distributions of crystalline basement and sediments for major global tectonic realms. Each tectonic realm is characterized by a specific lifespan, which is an inverse function of its recycling rate. The estimated average half-area of half-mass ages are given. The corresponding parameters for continental crust are 690 Ma for K/Ar, and approximately 1200 Ma for Rb/St and U-Th/Pb dating pairs. Tectonic diversity preserved in the geologic record is therefore a function of time, with oceanic tectonic realms, because of their rapid recycling, underrepresented in the rocks older than approximately 300 Ma. The Sm/Nd isotopic systematic of sediments suggest that, for a near steady-state post-Archean sedimentary mass, recycling is approximately 90 + or - 5 percent cannibalistic. This yields an estimated upper limit on crust-mantle exchange via sediment subduction of approximately 1.1 + or - 0.5 x 10 g a(sup -1) considerably less than demanded by isotopic constraints. The discrepancy may indicate the existence of additional loci, such as orogenic belts, for significant crust-mantle interaction.

  14. Ideas: Recycling.

    ERIC Educational Resources Information Center

    Chessin, Debby A.; And Others

    1994-01-01

    Presents classroom ideas focusing on connections among mathematics, concern for the environment, and conservation of natural resources, including decomposition, water conservation, packaging materials, use of manufactured cans, and recycling. Includes reproducible student worksheets. (MKR)

  15. Effects of acoustic hood on noise, CFC-11, and particulate matter in a recycling system for waste refrigerator cabinet.

    PubMed

    Guo, Jie; Fang, Wenxiong; Yang, Yichen; Xu, Zhenming

    2014-11-01

    The mechanical-physical process was proven to be technologically feasible for waste refrigerator recycling and has been widely used in the typical e-waste recycling factories in China. In this study, effects of the acoustic hood on the reduction of noise level, CFC-11, and heavy metals (Cr, Ni, Cu, Cd, and Pb) in particulate matter (PM) were evaluated. For noise pollution, the noise level inside and outside the acoustic hood was 96.4 and 78.9 dB, respectively. Meanwhile, it had a significant effect on A-weighted sound level with a reduction from 98.3 to 63.6 dB. For CFC-11 exposure, abundant CFC-11 (255 mg/m(3)) was detected in the acoustic hood. However, the mean concentration of CFC-11 at the outline of polyurethane foam collection was obviously diminished to 14 mg/m(3), and no CFC-11 was monitored around the acoustic hood. The concentrations of PM and heavy metals in PM outside the acoustic hood were lower than those inside the acoustic hood due to the physical barriers of the acoustic hood. Based on the risk assessment, only adverse health effect caused by Pb might likely appear. All the results can provide the basic data for pollution control and risk assessment in waste refrigerator recycling system.

  16. Comparison of aerobically-treated and untreated crop residue as a source of recycled nutrients in a recirculating hydroponic system

    NASA Astrophysics Data System (ADS)

    Mackowiak, C. L.; Garland, J. L.; Strayer, R. F.; Finger, B. W.; Wheeler, R. M.

    1996-01-01

    This study compared the growth of potato plants on nutrients recycled from inedible potato biomass. Plants were grown for 105 days in recirculating, thin-film hydroponic systems containing four separate nutrient solution treatments: 1) modified half-strength Hoagland's (control), 2) liquid effluent from a bioreactor containing inedible potato biomass, 3) filtered (0.2 μm) effluent, and 4) the water soluble fraction of inedible potato biomass (leachate). Approximately 50% of the total nutrient requirement in treatments 2 - 4 were provided (recycled) from the potato biomass. Leachate had an inhibitory effect on leaf conductance, photosynthetic rate, and growth (50% reduction in plant height and 60% reduction in tuber yield). Plants grown on bioreactor effluent (filtered or unfiltered) were similar to the control plants. These results indicated that rapidly degraded, water soluble organic material contained in the inedible biomass, i.e., material in leachate, brought about phytotoxicity in the hydroponic culture of potato. Recalcitrant, water soluble organic material accumulated in all nutrient recycling treatments (650% increase after 105 days), but no increase in rhizosphere microbial numbers was observed.

  17. Comparison of aerobically-treated and untreated crop residue as a source of recycled nutrients in a recirculating hydroponic system

    NASA Technical Reports Server (NTRS)

    Mackowiak, C. L.; Garland, J. L.; Strayer, R. F.; Finger, B. W.; Wheeler, R. M.

    1996-01-01

    This study compared the growth of potato plants on nutrients recycled from inedible potato biomass. Plants were grown for 105 days in recirculating, thin-film hydroponic systems containing four separate nutrient solution treatments: (1) modified half-strength Hoagland's (control), 2) liquid effluent from a bioreactor containing inedible potato biomass, 3) filtered (0.2 micrometer) effluent, and 4) the water soluble fraction of inedible potato biomass (leachate). Approximately 50% of the total nutrient requirement in treatments 2-4 were provided (recycled) from the potato biomass. Leachate had an inhibitory effect on leaf conductance, photosynthetic rate, and growth (50% reduction in plant height and 60% reduction in tuber yield). Plants grown on bioreactor effluent (filtered or unfiltered) were similar to the control plants. These results indicated that rapidly degraded, water soluble organic material contained in the inedible biomass, i.e., material in leachate, brought about phytotoxicity in the hydroponic culture of potato. Recalcitrant, water soluble organic material accumulated in all nutrient recycling treatments (650% increase after 105 days), but no increase in rhizosphere microbial numbers was observed.

  18. Effects of acoustic hood on noise, CFC-11, and particulate matter in a recycling system for waste refrigerator cabinet.

    PubMed

    Guo, Jie; Fang, Wenxiong; Yang, Yichen; Xu, Zhenming

    2014-11-01

    The mechanical-physical process was proven to be technologically feasible for waste refrigerator recycling and has been widely used in the typical e-waste recycling factories in China. In this study, effects of the acoustic hood on the reduction of noise level, CFC-11, and heavy metals (Cr, Ni, Cu, Cd, and Pb) in particulate matter (PM) were evaluated. For noise pollution, the noise level inside and outside the acoustic hood was 96.4 and 78.9 dB, respectively. Meanwhile, it had a significant effect on A-weighted sound level with a reduction from 98.3 to 63.6 dB. For CFC-11 exposure, abundant CFC-11 (255 mg/m(3)) was detected in the acoustic hood. However, the mean concentration of CFC-11 at the outline of polyurethane foam collection was obviously diminished to 14 mg/m(3), and no CFC-11 was monitored around the acoustic hood. The concentrations of PM and heavy metals in PM outside the acoustic hood were lower than those inside the acoustic hood due to the physical barriers of the acoustic hood. Based on the risk assessment, only adverse health effect caused by Pb might likely appear. All the results can provide the basic data for pollution control and risk assessment in waste refrigerator recycling system. PMID:24965005

  19. Microtubule-dependent apical restriction of recycling endosomes sustains adherens junctions during morphogenesis of the Drosophila tracheal system.

    PubMed

    Le Droguen, Pierre-Marie; Claret, Sandra; Guichet, Antoine; Brodu, Véronique

    2015-01-15

    Epithelial remodelling is an essential mechanism for organogenesis, during which cells change shape and position while maintaining contact with each other. Adherens junctions (AJs) mediate stable intercellular cohesion but must be actively reorganised to allow morphogenesis. Vesicle trafficking and the microtubule (MT) cytoskeleton contribute to regulating AJs but their interrelationship remains elusive. We carried out a detailed analysis of the role of MTs in cell remodelling during formation of the tracheal system in the Drosophila embryo. Induction of MT depolymerisation specifically in tracheal cells shows that MTs are essential during a specific time frame of tracheal cell elongation while the branch extends. In the absence of MTs, one tracheal cell per branch overelongates, ultimately leading to branch break. Three-dimensional quantifications revealed that MTs are crucial to sustain E-Cadherin (Shotgun) and Par-3 (Bazooka) levels at AJs. Maintaining E-Cadherin/Par-3 levels at the apical domain requires de novo synthesis rather than internalisation and recycling from and to the apical plasma membrane. However, apical targeting of E-Cadherin and Par-3 requires functional recycling endosomes, suggesting an intermediate role for this compartment in targeting de novo synthesized E-Cadherin to the plasma membrane. We demonstrate that apical enrichment of recycling endosomes is dependent on the MT motor Dynein and essential for the function of this vesicular compartment. In addition, we establish that E-Cadherin dynamics and MT requirement differ in remodelling tracheal cells versus planar epithelial cells. Altogether, our results uncover an MT-Dynein-dependent apical restriction of recycling endosomes that controls adhesion by sustaining Par-3 and E-Cadherin levels at AJs during morphogenesis.

  20. Vision ergonomics at recycling centres.

    PubMed

    Hemphälä, Hillevi; Kihlstedt, Annika; Eklund, Jörgen

    2010-05-01

    All municipalities in Sweden offer their inhabitants a service for disposing of large-size and hazardous waste at local recycling centres. Opening hours at these centres include hours of darkness. The aims of this study were to 1) describe user and employee experiences of lighting and signs at Swedish recycling centres, 2) measure and assess the lighting system at the two recently built recycling centres in Linköping and to assess the legibility and visibility of the signs used and 3) propose recommendations regarding lighting and signs for recycling centres. Interviews and questionnaires were used to assess experiences of employees and users, and light measurements were performed. By observing users, activities with different visual demands at different areas within the recycling centres were identified. Based on the literature, standards and stakeholder experiences, recommendations regarding lighting systems and sign design, illuminance, luminance and uniformity are proposed for recycling centres.

  1. Integrated system for temperature-controlled fast protein liquid chromatography comprising improved copolymer modified beaded agarose adsorbents and a travelling cooling zone reactor arrangement.

    PubMed

    Müller, Tobias K H; Cao, Ping; Ewert, Stephanie; Wohlgemuth, Jonas; Liu, Haiyang; Willett, Thomas C; Theodosiou, Eirini; Thomas, Owen R T; Franzreb, Matthias

    2013-04-12

    An integrated approach to temperature-controlled chromatography, involving copolymer modified agarose adsorbents and a novel travelling cooling zone reactor (TCZR) arrangement, is described. Sepharose CL6B was transformed into a thermoresponsive cation exchange adsorbent (thermoCEX) in four synthetic steps: (i) epichlorohydrin activation; (ii) amine capping; (iii) 4,4'-azobis(4-cyanovaleric acid) immobilization; and 'graft from' polymerization of poly(N-isopropylacrylamide-co-N-tert-butylacrylamide-co-acrylic acid-co-N,N'-methylenebisacrylamide). FT-IR, (1)H NMR, gravimetry and chemical assays allowed precise determination of the adsorbent's copolymer composition and loading, and identified the initial epoxy activation step as a critical determinant of 'on-support' copolymer loading, and in turn, protein binding performance. In batch binding studies with lactoferrin, thermoCEX's binding affinity and maximum adsorption capacity rose smoothly with temperature increase from 20 to 50 °C. In temperature shifting chromatography experiments employing thermoCEX in thermally jacketed columns, 44-51% of the lactoferrin adsorbed at 42 °C could be desorbed under binding conditions by cooling the column to 22 °C, but the elution peaks exhibited strong tailing. To more fully exploit the potential of thermoresponsive chromatography adsorbents, a new column arrangement, the TCZR, was developed. In TCZR chromatography, a narrow discrete cooling zone (special assembly of copper blocks and Peltier elements) is moved along a bespoke fixed-bed separation columnfilled with stationary phase. In tests with thermoCEX, it was possible to recover 65% of the lactoferrin bound at 35 °C using 8 successive movements of the cooling zone at a velocity of 0.1mm/s; over half of the recovered protein was eluted in the first peak in more concentrated form than in the feed. Intra-particle diffusion of desorbed protein out of the support pores, and the ratio between the velocities of the cooling

  2. System Design Description and Requirements for Modeling the Off-Gas Systems for Fuel Recycling Facilities

    SciTech Connect

    Daryl R. Haefner; Jack D. Law; Troy J. Tranter

    2010-08-01

    This document provides descriptions of the off-gases evolved during spent nuclear fuel processing and the systems used to capture the gases of concern. Two reprocessing techniques are discussed, namely aqueous separations and electrochemical (pyrochemical) processing. The unit operations associated with each process are described in enough detail so that computer models to mimic their behavior can be developed. The document also lists the general requirements for the desired computer models.

  3. Decision-making support system based on LCA for aseptic packaging recycling.

    PubMed

    Varžinskas, Visvaldas; Staniškis, Jurgis K; Knašyte, Milda

    2012-09-01

    In Europe post-consumer beverage carton packages are treated in three ways: dumped in a landfill, incinerated for energy recovery, and recycled. In recent years new technologies for beverage carton recycling have been developed and tested. At the same time in Europe the collection of second-hand raw materials is becoming more efficient. In order to facilitate and justify the decision-making process, different possibilities of poly-aluminium handling were analysed. For this reason, the objective of this study was to compare carbon footprints in the whole life cycle of selected technologies and to provide decision-making with data for beverage carton recycling. The paper is based on some of the results of the project 'Sustainable Production through Innovations in small- and medium-sized enterprises (SPIN)'. The SPIN project is providing small- and medium-sized enterprises with a whole set of instruments that put entrepreneurs in a position to innovate their production processes and products leading to improved business and public benefits.

  4. Decision-making support system based on LCA for aseptic packaging recycling.

    PubMed

    Varžinskas, Visvaldas; Staniškis, Jurgis K; Knašyte, Milda

    2012-09-01

    In Europe post-consumer beverage carton packages are treated in three ways: dumped in a landfill, incinerated for energy recovery, and recycled. In recent years new technologies for beverage carton recycling have been developed and tested. At the same time in Europe the collection of second-hand raw materials is becoming more efficient. In order to facilitate and justify the decision-making process, different possibilities of poly-aluminium handling were analysed. For this reason, the objective of this study was to compare carbon footprints in the whole life cycle of selected technologies and to provide decision-making with data for beverage carton recycling. The paper is based on some of the results of the project 'Sustainable Production through Innovations in small- and medium-sized enterprises (SPIN)'. The SPIN project is providing small- and medium-sized enterprises with a whole set of instruments that put entrepreneurs in a position to innovate their production processes and products leading to improved business and public benefits. PMID:22778144

  5. Textile recycling

    SciTech Connect

    Jablonowski, E. ); Carlton, J.

    1995-01-01

    The most common household textiles include clothing, linens, draperies, carpets, shoes, handbags, and rugs. Old clothing, of course, is the most readily reused and/or recycled residentially generated textile category. State and/or local mandates to recycle a percentage of the waste stream are providing the impetus to add new materials to existing collection programs. Concurrently, the textile industry is aggressively trying to increase its throughput by seeking new sources of material to meet increased world demand for product. As experienced with drop-off programs for traditional materials, a majority of residents will not recycle materials unless the collection programs are convenient, i.e., curbside collection. The tonnage of marketable textiles currently being landfilled provide evidence of this. It is the authors' contention that if textile recycling is made convenient and accessible to every household in a municipality or region, then the waste stream disposed may be reduced in a similar fashion as when traditional recyclables are included in curbside programs.

  6. Recycling polyurethanes

    SciTech Connect

    1995-08-01

    This article reports on the PolyUrethane Recycle and Recovery Council`s continuing evaluation of the technical and commercial viability of polyurethane recovery and recycling technologies. In North America, 240,000 tonnes of post-industrial and 16,000 tonnes of post-consumer polyurethane foam was recycled into carpet rebound underlay and other applications in 1993. Demand was so great in North America that 60,000 t of primarily post-industrial scarp was imported from Europe and the Far East. Polyurethane from the seats of the 9 million vehicles scrapped each year could yield 82,000 t of flexible post-consumer foam scrap: instrument and door panels could yield another 10,000 t of semi-flexible scrap.

  7. The uranium from seawater program at PNNL: Overview of marine testing, adsorbent characterization, adsorbent durability, adsorbent toxicity, and deployment studies

    DOE PAGES

    Gill, Gary A.; Kuo, Li -Jung; Janke, Christopher James; Park, Jiyeon; Jeters, Robert T.; Bonheyo, George T.; Pan, Horng -Bin; Wai, Chien; Khangaonkar, Tarang P.; Bianucci, Laura; et al

    2016-02-07

    The Pacific Northwest National Laboratory's (PNNL) Marine Science Laboratory (MSL) located along the coast of Washington State is evaluating the performance of uranium adsorption materials being developed for seawater extraction under realistic marine conditions with natural seawater. Two types of exposure systems were employed in this program: flow-through columns for testing of fixed beds of individual fibers and pellets and a recirculating water flume for testing of braided adsorbent material. Testing consists of measurements of the adsorption of uranium and other elements from seawater as a function of time, typically 42 to 56 day exposures, to determine the adsorbent capacitymore » and adsorption rate (kinetics). Analysis of uranium and other trace elements collected by the adsorbents was conducted following strong acid digestion of the adsorbent with 50% aqua regia using either Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) or Inductively Coupled Plasma Mass Spectrometer (ICP-MS). The ORNL 38H adsorbent had a 56 day adsorption capacity of 3.30 ± 0.68 g U/ kg adsorbent (normalized to a salinity of 35 psu), a saturation adsorption capacity of 4.89 ± 0.83 g U/kg of adsorbent material (normalized to a salinity of 35 psu) and a half-saturation time of 28 10 days. The AF1 adsorbent material had a 56 day adsorption capacity of 3.9 ± 0.2 g U/kg adsorbent material (normalized to a salinity of 35 psu), a saturation capacity of 5.4 ± 0.2 g U/kg adsorbent material (normalized to a salinity of 35 psu) and a half saturation time of 23 2 days. The ORNL amidoxime-based adsorbent materials are not specific for uranium, but also adsorb other elements from seawater. The major doubly charged cations in seawater (Ca and Mg) account for a majority of the cations adsorbed (61% by mass and 74% by molar percent). For the ORNL AF1 adsorbent material, U is the 4th most abundant element adsorbed by mass and 7th most abundant by molar percentage. Marine testing

  8. Helium-Recycling Plant

    NASA Technical Reports Server (NTRS)

    Cook, Joseph

    1996-01-01

    Proposed system recovers and stores helium gas for reuse. Maintains helium at 99.99-percent purity, preventing water vapor from atmosphere or lubricating oil from pumps from contaminating gas. System takes in gas at nearly constant low back pressure near atmospheric pressure; introduces little or no back pressure into source of helium. Concept also extended to recycling of other gases.

  9. What can recycling in thermal reactors accomplish?

    SciTech Connect

    Piet, Steven J.; Matthern, Gretchen E.; Jacobson, Jacob J.

    2007-07-01

    Thermal recycle provides several potential benefits when used as stop-gap, mixed, or backup recycling to recycling in fast reactors. These three roles involve a mixture of thermal and fast recycling; fast reactors are required to some degree at some time. Stop-gap uses thermal reactors only until fast reactors are adequately deployed and until any thermal-recycle-only facilities have met their economic lifetime. Mixed uses thermal and fast reactors symbiotically for an extended period of time. Backup uses thermal reactors only if problems later develop in the fast reactor portion of a recycling system. Thermal recycle can also provide benefits when used as pure thermal recycling, with no intention to use fast reactors. However, long term, the pure thermal recycling approach is inadequate to meet several objectives. (authors)

  10. What can Recycling in Thermal Reactors Accomplish?

    SciTech Connect

    Steven Piet; Gretchen E. Matthern; Jacob J. Jacobson

    2007-09-01

    Thermal recycle provides several potential benefits when used as stop-gap, mixed, or backup recycling to recycling in fast reactors. These three roles involve a mixture of thermal and fast recycling; fast reactors are required to some degree at some time. Stop-gap uses thermal reactors only until fast reactors are adequately deployed and until any thermal-recycle-only facilities have met their economic lifetime. Mixed uses thermal and fast reactors symbiotically for an extended period of time. Backup uses thermal reactors only if problems later develop in the fast reactor portion of a recycling system. Thermal recycle can also provide benefits when used as pure thermal recycling, with no intention to use fast reactors. However, long term, the pure thermal recycling approach is inadequate to meet several objectives.

  11. Hydrophobic Porous Material Adsorbs Small Organic Molecules

    NASA Technical Reports Server (NTRS)

    Sharma, Pramod K.; Hickey, Gregory S.

    1994-01-01

    Composite molecular-sieve material has pore structure designed specifically for preferential adsorption of organic molecules for sizes ranging from 3 to 6 angstrom. Design based on principle that contaminant molecules become strongly bound to surface of adsorbent when size of contaminant molecules is nearly same as that of pores in adsorbent. Material used to remove small organic contaminant molecules from vacuum systems or from enclosed gaseous environments like closed-loop life-support systems.

  12. Radioactive tracer test to develop a recycling system for operating reactor scrap metal

    SciTech Connect

    Umemura, A.; Kimura, K.; Takahashi, K.; Sakurai, D.; Yamamoto, M.; Abe, S.

    1995-12-31

    A demonstration test using radio-isotope (RI) tracers during the manufacturing of inner drum shielding material from the recycling of operating reactor scrap metal was completed and the following results were obtained. The behavior of five radionuclides (Mn-54, Co-60, Zn-65, Sr-85 and Cs-137) was established. The time-dependent behaviors of the radionuclides in molten steel and in slag were investigated. The radioactivity distributions in metal products were homogeneous. Dose equivalent rates in the working area were below background levels and radioactive dust concentrations in the air were below detection limits.

  13. Reverse logistics system planning for recycling computers hardware: A case study

    NASA Astrophysics Data System (ADS)

    Januri, Siti Sarah; Zulkipli, Faridah; Zahari, Siti Meriam; Shamsuri, Siti Hajar

    2014-09-01

    This paper describes modeling and simulation of reverse logistics networks for collection of used computers in one of the company in Selangor. The study focuses on design of reverse logistics network for used computers recycling operation. Simulation modeling, presented in this work allows the user to analyze the future performance of the network and to understand the complex relationship between the parties involved. The findings from the simulation suggest that the model calculates processing time and resource utilization in a predictable manner. In this study, the simulation model was developed by using Arena simulation package.

  14. Recycling Philology.

    ERIC Educational Resources Information Center

    Knapp, Peggy A.

    1993-01-01

    Proposes that English teachers recycle philology as a field of study. Redefines the shape of philology in view of postmodern theories of signification. Considers concepts of hermeneutics in retheorizing the aims of philology. Shows how such philological investigation might be used in the classroom to study literary texts. (HB)

  15. The Dynamic Earth: Recycling Naturally!

    ERIC Educational Resources Information Center

    Goldston, M. Jenice; Allison, Elizabeth; Fowler, Lisa; Glaze, Amanda

    2013-01-01

    This article begins with a thought-provoking question: What do you think of when you hear the term "recycle?" Many think about paper, glass, aluminum cans, landfills, and reducing waste by reusing some of these materials. How many of us ever consider the way the systems of Earth dynamically recycle its materials? In the following…

  16. Association of Rab25 and Rab11a with the Apical Recycling System of Polarized Madin–Darby Canine Kidney Cells

    PubMed Central

    Casanova, James E.; Wang, Xiaoye; Kumar, Ravindra; Bhartur, Sheela G.; Navarre, Jennifer; Woodrum, Julie E.; Altschuler, Yoram; Ray, Greg S.; Goldenring, James R.

    1999-01-01

    Recent evidence suggests that apical and basolateral endocytic pathways in epithelia converge in an apically located, pericentriolar endosomal compartment termed the apical recycling endosome. In this compartment, apically and basolaterally internalized membrane constituents are thought to be sorted for recycling back to their site of origin or for transcytosis to the opposite plasma membrane domain. We report here that in the epithelial cell line Madin–Darby Canine Kidney (MDCK), antibodies to Rab11a label an apical pericentriolar endosomal compartment that is dependent on intact microtubules for its integrity. Furthermore, this compartment is accessible to a membrane-bound marker (dimeric immunoglobulin A [IgA]) internalized from either the apical or basolateral pole, functionally defining it as the apical recycling endosome. We have also examined the role of a closely related epithelial-specific Rab, Rab25, in the regulation of membrane recycling and transcytosis in MDCK cells. When cDNA encoding Rab25 was transfected into MDCK cells, the protein colocalized with Rab11a in subapical vesicles. Rab25 transfection also altered the distribution of Rab11a, causing the coalescence of immunoreactivity into multiple denser vesicular structures not associated with the centrosome. Nevertheless, nocodazole still dispersed these vesicles, and dimeric IgA internalized from either the apical or basolateral membrane was detected in endosomes labeled with antibodies to both Rab11a and Rab25. Overexpression of Rab25 decreased the rate of IgA transcytosis and of apical, but not basolateral, recycling of internalized ligand. Conversely, expression of the dominant-negative Rab25T26N did not alter either apical recycling or transcytosis. These results indicate that both Rab11a and Rab25 associate with the apical recycling system of epithelial cells and suggest that Rab25 may selectively regulate the apical recycling and/or transcytotic pathways. PMID:9880326

  17. Reverse logistics system and recycling potential at a landfill: A case study from Kampala City.

    PubMed

    Kinobe, J R; Gebresenbet, G; Niwagaba, C B; Vinnerås, B

    2015-08-01

    The rapid growing population and high urbanisation rates in Sub-Saharan Africa has caused enormous pressure on collection services of the generated waste in the urban areas. This has put a burden on landfilling, which is the major waste disposal method. Waste reduction, re-use and recycling opportunities exist but are not fully utilized. The common items that are re-used and re-cycled are plastics, paper, aluminum, glass, steel, cardboard, and yard waste. This paper develops an overview of reverse logistics at Kiteezi landfill, the only officially recognised waste disposal facility for Kampala City. The paper analyses, in details the collection, re-processing, re-distribution and final markets of these products into a reversed supply chain network. Only 14% of the products at Kiteezi landfill are channeled into the reverse chain while 63% could be included in the distribution chain but are left out and disposed of while the remaining 23% is buried. This is because of the low processing power available, lack of market value, lack of knowledge and limited value addition activities to the products. This paper proposes possible strategies of efficient and effective reverse logistics development, applicable to Kampala City and other similar cities. PMID:25936554

  18. Reverse logistics system and recycling potential at a landfill: A case study from Kampala City.

    PubMed

    Kinobe, J R; Gebresenbet, G; Niwagaba, C B; Vinnerås, B

    2015-08-01

    The rapid growing population and high urbanisation rates in Sub-Saharan Africa has caused enormous pressure on collection services of the generated waste in the urban areas. This has put a burden on landfilling, which is the major waste disposal method. Waste reduction, re-use and recycling opportunities exist but are not fully utilized. The common items that are re-used and re-cycled are plastics, paper, aluminum, glass, steel, cardboard, and yard waste. This paper develops an overview of reverse logistics at Kiteezi landfill, the only officially recognised waste disposal facility for Kampala City. The paper analyses, in details the collection, re-processing, re-distribution and final markets of these products into a reversed supply chain network. Only 14% of the products at Kiteezi landfill are channeled into the reverse chain while 63% could be included in the distribution chain but are left out and disposed of while the remaining 23% is buried. This is because of the low processing power available, lack of market value, lack of knowledge and limited value addition activities to the products. This paper proposes possible strategies of efficient and effective reverse logistics development, applicable to Kampala City and other similar cities.

  19. Electronic labelling in recycling of manufactured articles.

    PubMed

    Olejnik, Lech; Krammer, Alfred

    2002-12-01

    The concept of a recycling system aiming at the recovery of resources from manufactured articles is proposed. The system integrates electronic labels for product identification and internet for global data exchange. A prototype for the recycling of electric motors has been developed, which implements a condition-based recycling decision system to automatically select the environmentally and economically appropriate recycling strategy, thereby opening a potential market for second-hand motors and creating a profitable recycling process itself. The project has been designed to evaluate the feasibility of electronic identification applied on a large number of motors and to validate the system in real field conditions.

  20. Electronic labelling in recycling of manufactured articles.

    PubMed

    Olejnik, Lech; Krammer, Alfred

    2002-12-01

    The concept of a recycling system aiming at the recovery of resources from manufactured articles is proposed. The system integrates electronic labels for product identification and internet for global data exchange. A prototype for the recycling of electric motors has been developed, which implements a condition-based recycling decision system to automatically select the environmentally and economically appropriate recycling strategy, thereby opening a potential market for second-hand motors and creating a profitable recycling process itself. The project has been designed to evaluate the feasibility of electronic identification applied on a large number of motors and to validate the system in real field conditions. PMID:12503495

  1. Foulant characteristics comparison in recycling cooling water system makeup by municipal reclaimed water and surface water in power plant.

    PubMed

    Ping, Xu; Jing, Wang; Yajun, Zhang; Jie, Wang; Shuai, Si

    2015-01-01

    Due to water shortage, municipal reclaimed water rather than surface water was replenished into recycling cooling water system in power plants in some cities in China. In order to understand the effects of the measure on carbon steel corrosion, characteristics of two kinds of foulant produced in different systems were studied in the paper. Differences between municipal reclaimed water and surface water were analyzed firstly. Then, the weight and the morphology of two kinds of foulant were compared. Moreover, other characteristics including the total number of bacteria, sulfate reducing bacteria, iron bacteria, extracellular polymeric substance (EPS), protein (PN), and polysaccharide (PS) in foulant were analyzed. Based on results, it could be concluded that microbial and corrosive risk would be increased when the system replenished by municipal reclaimed water instead of surface water.

  2. Foulant Characteristics Comparison in Recycling Cooling Water System Makeup by Municipal Reclaimed Water and Surface Water in Power Plant

    PubMed Central

    Ping, Xu; Jing, Wang; Yajun, Zhang; Jie, Wang; Shuai, Si

    2015-01-01

    Due to water shortage, municipal reclaimed water rather than surface water was replenished into recycling cooling water system in power plants in some cities in China. In order to understand the effects of the measure on carbon steel corrosion, characteristics of two kinds of foulant produced in different systems were studied in the paper. Differences between municipal reclaimed water and surface water were analyzed firstly. Then, the weight and the morphology of two kinds of foulant were compared. Moreover, other characteristics including the total number of bacteria, sulfate reducing bacteria, iron bacteria, extracellular polymeric substance (EPS), protein (PN), and polysaccharide (PS) in foulant were analyzed. Based on results, it could be concluded that microbial and corrosive risk would be increased when the system replenished by municipal reclaimed water instead of surface water. PMID:25893132

  3. Foulant characteristics comparison in recycling cooling water system makeup by municipal reclaimed water and surface water in power plant.

    PubMed

    Ping, Xu; Jing, Wang; Yajun, Zhang; Jie, Wang; Shuai, Si

    2015-01-01

    Due to water shortage, municipal reclaimed water rather than surface water was replenished into recycling cooling water system in power plants in some cities in China. In order to understand the effects of the measure on carbon steel corrosion, characteristics of two kinds of foulant produced in different systems were studied in the paper. Differences between municipal reclaimed water and surface water were analyzed firstly. Then, the weight and the morphology of two kinds of foulant were compared. Moreover, other characteristics including the total number of bacteria, sulfate reducing bacteria, iron bacteria, extracellular polymeric substance (EPS), protein (PN), and polysaccharide (PS) in foulant were analyzed. Based on results, it could be concluded that microbial and corrosive risk would be increased when the system replenished by municipal reclaimed water instead of surface water. PMID:25893132

  4. Update on performance tests from the COBRA Process, a combined SO{sub 2} and NO{sub x} removal system[Copper Oxide Bed Regenerable Adsorber

    SciTech Connect

    Breault, R.W.; Litka, T.

    1999-07-01

    The Low Emission Boiler System (LEBS) Program of the US Department of Energy (DOE) is developing advanced power systems to accelerate the commercialization of affordable, highly efficient, and low-emission pulverized coal-fueled electric generating technologies. DB Riley Inc.'s concept for LEBS includes a dry, regenerable flue gas desulfurization and denitrification process. The COBRA (Copper Oxide Bed Regenerable Adsorber) Process can efficiently remove sulfur dioxide (SO{sub 2}) and sulfur trioxide (SO{sub 3}) and reduce nitrogen oxides (NO{sub x}) from flue gas with no solid or liquid byproducts and at a competitive cost. The sulfur laden flue gas is contacted with copper oxide impregnated alumina substrate in a cross flow moving bed reactor operating at 700 F. Sulfur dioxide reacts with the copper to form copper sulfate and the copper oxide/copper sulfate bed acts as a selective catalyst for NO{sub x} reduction. The sulfated sorbent is transported from the bottom of the moving bed reactors to the regenerator vessels where methane is used to reduce the copper sulfate to copper and SO{sub 2}. The concentrated SO{sub 2} stream resulting from regeneration may be oxidized to SO{sub 3} and condensed to sulfuric acid or can be converted to elemental sulfur in a Claus Plant or scrubbed with ammonia to form an ammonium sulfate. This paper will present the results of performance testing conducted on a 1 MW Pilot Scale Facility located at the Illinois Coal Development Park. This facility was designed and built to demonstrate at a reasonable scale the component configurations to be utilized in a full-scale system and to verify and optimize the operation of the integrated system. The ability of laboratory tests, when combined with a model of the moving bed adsorber, to predict the performance of the pilot system will be shown.

  5. Quantitative sustainability and qualitative concerns in an irrigations system using recycled water to supplement limited groundwater supply

    NASA Astrophysics Data System (ADS)

    Gowing, John; Alataway, Abed

    2013-04-01

    Sustainability of irrigation in a country facing water scarcity depends upon adoption of best management practices to deliver 'more crop per drop' together with use of recycled waste-water from urban sewage systems. Saudi Arabia is a country facing extreme water scarcity and in this paper we report on research conducted at an extensive irrigation system where a concerted effort over several years has been devoted to achieving a high level of water productivity. Al-Ahsa oasis is located about 60 km inland from the Persian Gulf and has been inhabited since prehistoric times, due to the abundance of water in an otherwise arid region. It is one of the largest oases in the world with 12,000 hectares of irrigated land and more than 2 million palm trees. Historically the oasis was watered by over 60 artesian springs, but water is now pumped from the aquifer. To supplement this groundwater source, treated waste-water reuse has been practiced since 1992 and now comprises 30% of total supply. In addition, a comparable amount of agricultural drainage water is collected and recycled, so that the 'first-use' water represents only 40% of total irrigation supply. While this re-use system permits sustained irrigation with greatly reduced groundwater abstraction, there is a potential down-side in that fertilizers and contaminants applied with irrigation water move through the soil and return to the irrigation supply enhancing the risk for human and animal health. We investigated this problem using E coli and helminth eggs as indicators of human health risk. We sampled each of the three sources which are delivered separately to the head of the main irrigation canal where they are blended. The groundwater was free from E coli and helminths and the treated wastewater source was generally within designated quality standards. The recycled drainage water was delivered untreated into the canal system and was found to be contaminated with both E coli and helminths above acceptable

  6. Use of halophytic plants for recycling NaCl in human liquid waste in a bioregenerative life support system

    NASA Astrophysics Data System (ADS)

    Balnokin, Yurii; Nikolai, Myasoedov; Larisa, Popova; Alexander, Tikhomirov; Sofya, Ushakova; Christophe, Lasseur; Jean-Bernard, Gros

    2010-09-01

    The purpose of this work was to develop technology for recycling NaCl containing in human liquid waste as intrasystem matter in a bioregenerative life support system (BLSS). The circulation of Na + and Cl - excreted in urine is achieved by inclusion of halophytes, i.e. plants that naturally inhabit salt-rich soils and accumulate NaCl in their organs. A model of Na + and Cl - recycling in a BLSS was designed, based on the NaCl turnover in the human-urine-nutrient solution-halophytic plant-human cycle. The study consisted of (i) selecting a halophyte suitable for inclusion in a BLSS, and (ii) determining growth conditions supporting maximal Na + and Cl - accumulation in the shoots of the halophyte growing in a nutrient solution simulating mineralized urine. For the selected halophytic plant, Salicornia europaea, growth rate under optimal conditions, biomass production and quantities of Na + and Cl - absorbed were determined. Characteristics of a plant production conveyor consisting of S.europaea at various ages, and allowing continuity of Na + and Cl - turnover, were estimated. It was shown that closure of the NaCl cycle in a BLSS can be attained if the daily ration of fresh Salicornia biomass for a BLSS inhabitant is approximately 360 g.

  7. Organo/LDH nanocomposite as an adsorbent of polycyclic aromatic hydrocarbons in water and soil-water systems.

    PubMed

    Bruna, F; Celis, R; Real, M; Cornejo, J

    2012-07-30

    Polycyclic aromatic hydrocarbons (PAHs) are considered as priority pollutants because of their high risk to human health. In this paper, we addressed the issue of using hydrotalcite-based nanocomposites as adsorbents of six low molecular weight PAHs (acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene and pyrene) to reduce their negative effects on the environment. A nanocomposite (HT-DDS) was prepared by intercalating the organic anion dodecylsulfate (DDS) in a Mg-Al hydrotalcite (HT), and then characterized using several analytical techniques. A Mediterranean soil was selected for being a high-risk scenario of groundwater contamination by leaching of pollutants. The nanocomposite displayed enhanced affinity for the PAHs in water as compared to carbonate-hydrotalcite (HTCO(3)) and its calcined product (HT500), and showed a high irreversibility of the adsorption process (hysteresis coefficient, H<0.15). The results revealed an increase of the pollutants retention in the soil by the addition of the nanocomposite that depended on the nanocomposite application rate and also on the hydrophobicity of each PAH. Accordingly, the use of HT-DDS as an amendment or barrier in contaminated soil is proposed for reducing the mobility of PAHs and, consequently, the adverse effect derived from rapid transport losses of the pollutants to the adjoining environmental compartments.

  8. Precipitation Recycling

    NASA Technical Reports Server (NTRS)

    Eltahir, Elfatih A. B.; Bras, Rafael L.

    1996-01-01

    The water cycle regulates and reflects natural variability in climate at the regional and global scales. Large-scale human activities that involve changes in land cover, such as tropical deforestation, are likely to modify climate through changes in the water cycle. In order to understand, and hopefully be able to predict, the extent of these potential global and regional changes, we need first to understand how the water cycle works. In the past, most of the research in hydrology focused on the land branch of the water cycle, with little attention given to the atmospheric branch. The study of precipitation recycling which is defined as the contribution of local evaporation to local precipitation, aims at understanding hydrologic processes in the atmospheric branch of the water cycle. Simply stated, any study on precipitation recycling is about how the atmospheric branch of the water cycle works, namely, what happens to water vapor molecules after they evaporate from the surface, and where will they precipitate?

  9. Recycling plant, human and animal wastes to plant nutrients in a closed ecological system

    NASA Technical Reports Server (NTRS)

    Meissner, H. P.; Modell, M.

    1979-01-01

    The essential minerals for plant growth are nitrogen, phosphorous, potassium (macronutrients), calcium, magnesium, sulfur (secondary nutrients), iron, manganese, boron, copper, zinc, chlorine, sodium, and molybdenum (micronutrients). The first step in recycling wastes will undoubtedly be oxidation of carbon and hydrogen to CO2 and H2O. Transformation of minerals to plant nutrients depends upon the mode of oxidation to define the state of the nutrients. For the purpose of illustrating the type of processing required, ash and off-gas compositions of an incineration process were assumed and subsequent processing requirements were identified. Several processing schemes are described for separating out sodium chloride from the ash, leading to reformulation of a nutrient solution which should be acceptable to plants.

  10. Extensive Treatment System For Recycling Water For Flushing Fresh Manure And Recovering Nutrients

    NASA Astrophysics Data System (ADS)

    Morand, Philippe; Robin, Paul; Escande, Aurélie; Picot, Bernadette; Pourcher, Anne-Marie; Jiangping, Qiu; Yinsheng, Li; Hamon, Gwenn; Amblard, Charlotte; Luth, Fievet, Sébastien; Oudart, Didier; Le Quéré, Camille Pain; Cluzeau, Daniel; Landrain, Brigitte

    2010-11-01

    From preliminary researches on a pilot scale, a complete demonstration plant was built to treat the effluents of a 30 pregnant sow's piggery. It includes a screen, a vermifilter, a macrophyte lagooning, and a complementary water storage pond; the recycled water is used for flushing, and rainfall is collected to compensate for evapotranspiration. After functioning in 2008 and 2009, it was showed that, during the warm season, the whole plant produced an effluent suitable for flushing, where the concentration decrease was over 70% for the phosphorus and potassium, 95% for the COD and nitrogen, 99.8% for endocrine disruptors (estrogenic activity), and 99.99% for pathogenic micro-organisms. During the cold season, the dilution by the rain water and the treatment effect of the constructed wetlands lead to similar results. Nevertheless, for this season, suitable floating macrophytes that will cover the lagoons remain to be settled.

  11. Recycling Flight Hardware Components and Systems to Reduce Next Generation Research Costs

    NASA Technical Reports Server (NTRS)

    Turner, Wlat

    2011-01-01

    With the recent 'new direction' put forth by President Obama identifying NASA's new focus in research rather than continuing on a path to return to the Moon and Mars, the focus of work at Kennedy Space Center (KSC) may be changing dramatically. Research opportunities within the micro-gravity community potentially stands at the threshold of resurgence when the new direction of the agency takes hold for the next generation of experimenters. This presentation defines a strategy for recycling flight experiment components or part numbers, in order to reduce research project costs, not just in component selection and fabrication, but in expediting qualification of hardware for flight. A key component of the strategy is effective communication of relevant flight hardware information and available flight hardware components to researchers, with the goal of 'short circuiting' the design process for flight experiments

  12. Mesoporous Silica: A Suitable Adsorbent for Amines

    PubMed Central

    2009-01-01

    Mesoporous silica with KIT-6 structure was investigated as a preconcentrating material in chromatographic systems for ammonia and trimethylamine. Its adsorption capacity was compared to that of existing commercial materials, showing its increased adsorption power. In addition, KIT-6 mesoporous silica efficiently adsorbs both gases, while none of the employed commercial adsorbents did. This means that KIT-6 Mesoporous silica may be a good choice for integrated chromatography/gas sensing micro-devices. PMID:20628459

  13. [Recycle of contaminated scrap metal]: Task 1.3.2, Bulk solids feed system. Topical report, October 1993-- January 1996

    SciTech Connect

    1996-07-01

    A critical requirement in DOE`s efforts to recycle, reuse, and dispose of materials from its decontamination and decommissioning activities is the design of a robust system to process a wide variety of bulk solid feeds. The capability to process bulk solids will increase the range of materials and broaden the application of Catalytic Extraction Processing (CEP). The term bulk solids refers to materials that are more economically fed into the top of a molten metal bath than by submerged injection through a tuyere. Molten Metal Technology, Inc. (MMT) has characterized CEP`s ability to process bulk solid feed materials and has achieved significant growth in the size of bulk solid particles compatible with Catalytic Extraction Processing. Parametric experimental studies using various feed materials representative of the components of various DOE waste streams have validated design models which establish the reactor operating range as a function of feed material, mass flow rate, and particle size. MMT is investigating the use of a slurry system for bulk solid addition as it is the most efficient means for injecting soils, sludges, and similar physical forms into a catalytic processing unit. MMT is continuing to evaluate condensed phase product removal systems and alternative energy addition sources to enhance the operating efficiency of bulk solids CEP units. A condensed phase product removal system capable of on-demand product removal has been successfully demonstrated. MMT is also investigating the use of a plasma arc torch to provide supplemental heating during bulk solids processing. This comprehensive approach to bulk solids processing is expected to further improve overall process efficiency prior to the deployment of CEP for the recycle, reuse, and disposal of materials from DOE decontamination and decommissioning Activities.

  14. Recycling of quartz-poor/lithic-rich foreland-basin sediments in arid climate (Euphrates-Tigris-Karun river system)

    NASA Astrophysics Data System (ADS)

    Garzanti, Eduardo; Juboury, Ali Ismail Al; Zoleikhaei, Yousef; Vermeesch, Pieter; Hamzah Abdulhussein Jotheri, Jaafar; Akkoca, Dicle Bal; Allen, Mark; Andò, Sergio; Limonta, Mara; Padoan, Marta; Resentini, Alberto; Vezzoli, Giovanni

    2016-04-01

    In this detailed petrological analysis of a large source-to-sink sediment-routing system (catchment area > 1 million km2) we document its several peculiarities, and illustrate a rich petrographic and heavy-mineral dataset integrated by bulk-sediment geochemistry and detrital-zircon U-Pb geochronological data that widens the spectrum of compositions generally assumed as paradigmatic for orogenic settings. We test traditional versus upgraded sedimentary-petrology models in the endeavor to derive a more refined conceptual model of reference, in order to enhance the power of provenance analysis but also to define its limitations and understand which secret of nature is likely to remain beyond reach in our efforts to reconstruct orogenic landscapes of the past. Sands derived from the Zagros-Southeast Anatolian fold-thrust belt contain an abundance of lithic grains derived not only first-cycle from carbonates, cherts, mudrocks, arc volcanics, and obducted mantle serpentinites representing the exposed shallow structural level of the orogen, but also recycled from Neogene molassic strata exposed in the foothills. Quartz, K-feldspar and mica are equally scarce in first-cycle and recycled sediments. This quartz-poor petrographic signature, characterizing the broad undissected tectonic domain of the Anatolia-Iranian plateau, is markedly distinct from that of sands shed by highly elevated and dissected collision orogens of the same mountain system such as the Himalaya or the Alps. Arid climate in the region allows full preservation of chemically unstable grains including carbonate and mafic/ultramafic rock fragments even through more than a single sedimentary cycle. Also, it reduces transport capacity of fluvial systems, which dump most of their load in Mesopotamian marshlands upstream of the Arabian/Persian Gulf allochemical carbonate factory. Quartz-poor orogenic sediments from the Zagros-Southeast Anatolian range mix with quartz-rich recycled sands ultimately derived from

  15. Electron Transfer Reactivity Patterns at Chemically Modified Electrodes: Fundamentals and Application to the Optimization of Redox Recycling Amplification Systems

    SciTech Connect

    Bergren, Adam Johan

    2006-01-01

    Electroanalytical chemistry is often utilized in chemical analysis and Fundamental studies. Important advances have been made in these areas since the advent of chemically modified electrodes: the coating of an electrode with a chemical film in order to impart desirable, and ideally, predictable properties. These procedures enable the exploitation of unique reactivity patterns. This dissertation presents studies that investigate novel reaction mechanisms at self-assembled monolayers on gold. In particular, a unique electrochemical current amplification scheme is detailed that relies on a selective electrode to enable a reactivity pattern that results in regeneration of the analyte (redox recycling). This regenerating reaction can occur up to 250 times for each analyte molecule, leading to a notable enhancement in the observed current. The requirements of electrode selectivity and the resulting amplification and detection limit improvements are described with respect to the heterogeneous and homogeneous electron transfer rates that characterize the system. These studies revealed that the heterogeneous electrolysis of the analyte should ideally be electrochemically reversible, while that for the regenerating agent should be held to a low level. Moreover, the homogeneous reaction that recycles the analyte should occur at a rapid rate. The physical selectivity mechanism is also detailed with respect to the properties of the electrode and redox probes utilized. It is shown that partitioning of the analyte into/onto the adlayer leads to the extraordinary selectivity of the alkanethiolate monolayer modified electrode. Collectively, these studies enable a thorough understanding of the complex electrode mechanism required for successful redox recycling amplification systems, Finally, in a separate (but related) study, the effect of the akyl chain length on the heterogeneous electron transfer behavior of solution-based redox probes is reported, where an odd-even oscillation

  16. Design and Implementation of a Compact Master-Slave Robotic System with Force Feedback and Energy Recycling

    NASA Astrophysics Data System (ADS)

    Li, Chunguang; Inoue, Yoshio; Liu, Tao; Shibata, Kyoko; Oka, Koichi

    Master-slave control is becoming increasingly popular in the development of robotic systems which can provide rehabilitation training for hemiplegic patients with a unilaterally disabled limb. However, the system structures and control strategies of existent master-slave systems are always complex. An innovative master-slave system implementing force feedback and motion tracking for a rehabilitation robot is presented in this paper. The system consists of two identical motors with a wired connection, and the two motors are located at the master and slave manipulator sites respectively. The slave motor tracks the motion of the master motor directly driven by a patient. As well, the interaction force produced at the slave site is fed back to the patient. Therefore, the impaired limb driven by the slave motor can imitate the motion of the healthy limb controlling the master motor, and the patient can regulate the control force of the healthy limb properly according to the force sensation. The force sensing and motion tracking are achieved simultaneously with neither force sensors nor sophisticated control algorithms. The system is characterized by simple structure, bidirectional controllability, energy recycling, and force feedback without a force sensor. Test experiments on a prototype were conducted, and the results appraise the advantages of the system and demonstrate the feasibility of the proposed control scheme for a rehabilitation robot.

  17. Effect of tungsten concentration on growth of acetobacter xylinum as a promising agent for eco-friendly recycling system

    NASA Astrophysics Data System (ADS)

    Nandiyanto, A. B. D.; Halimatul, H. S.; Rosyid, N. H.; Effendi, D. B.

    2016-04-01

    Effect of tungsten (W) concentration on Acetobacter xylinum growth was studied. In the experimental procedure, concentration of W in the bacterial growth medium containing pineapple peels waste was varied from 0.5 to 50 ppm. To confirm the influence of W, the bacterial incubation process was carried out for 72 hours. Spectrophotometer analysis showed that the growth rate of Acetobacter xylinum decreased with increasing concentration of W. The result from fourier transform infra red analysis showed a slightly change on the absorption peak intensities and informing the interaction of W ion and bacteria cell. The result confirmed that Acetobacter xylinum was able to uptake W concentration up to 15 ppm, indicating that Acetobacter xylinum might act as a promising agent for eco-friendly recycling system.

  18. Real-time NMR monitoring of protein-folding kinetics by a recycle flow system for temperature jump.

    PubMed

    Yamasaki, Kazuhiko; Obara, Yuji; Hasegawa, Manabu; Tanaka, Hideki; Yamasaki, Tomoko; Wakuda, Tsuyoshi; Okada, Michiya; Kohzuma, Takamitsu

    2013-10-15

    An NMR method was developed that allows for real-time monitoring of reactions (on the order of seconds) induced by a temperature jump. In a recycle flow system, heating and cooling baths were integrated, with the latter inside the NMR probe. A refolding reaction of ribonuclease A was triggered by rapid cooling and monitored by a series of NMR measurements over 12 s. Data were processed by principal component analysis, in which a factor related to the structural change with an exponential rate constant of 0.2-0.7 s(-1) was successfully separated from factors related to baseline instability and/or noise. Temperature dependency of the rate constant revealed the entropy-driven formation of the transition state of the refolding reaction.

  19. Adsorbent and adsorbent bed for materials capture and separation processes

    SciTech Connect

    Liu, Wei

    2011-01-25

    A method device and material for performing adsorption wherein a fluid mixture is passed through a channel in a structured adsorbent bed having a solid adsorbent comprised of adsorbent particles having a general diameter less than 100 um, loaded in a porous support matrix defining at least one straight flow channel. The adsorbent bed is configured to allow passage of a fluid through said channel and diffusion of a target material into said adsorbent under a pressure gradient driving force. The targeted molecular species in the fluid mixture diffuses across the porous support retaining layer, contacts the adsorbent, and adsorbs on the adsorbent, while the remaining species in the fluid mixture flows out of the channel.

  20. Comparison of the efficiencies of attached- versus suspended-growth SBR systems in the treatment of recycled paper mill wastewater.

    PubMed

    Muhamad, Mohd Hafizuddin; Sheikh Abdullah, Siti Rozaimah; Abu Hasan, Hassimi; Abd Rahim, Reehan Adnee

    2015-11-01

    The complexity of residual toxic organics from biologically treated effluents of pulp and paper mills is a serious concern. To date, it has been difficult to choose the best treatment technique because each of the available options has advantages and drawbacks. In this study, two different treatment techniques using laboratory-scale aerobic sequencing batch reactors (SBRs) were tested with the same real recycled paper mill effluent to evaluate their treatment efficiencies. Two attached-growth SBRs using granular activated carbon (GAC) with and without additional biomass and a suspended-growth SBR were used in the treatment of real recycled paper mill effluent at a chemical oxygen demand (COD) level in the range of 800-1300 mg/L, a fixed hydraulic retention time of 24 h and a COD:N:P ratio of approximately 100:5:1. The efficiency of this biological treatment process was studied over a 300-day period. The six most important wastewater quality parameters, namely, chemical oxygen demand (COD), turbidity, ammonia (expressed as NH3-N), phosphorus (expressed as PO4(3)-P), colour, and suspended solids (SS), were measured to compare the different treatment techniques. It was determined that these processes were able to almost completely and simultaneously eliminate COD (99%) and turbidity (99%); the removals of NH3-N (90-100%), PO4(3)-P (66-78%), colour (63-91%), and SS (97-99%) were also sufficient. The overall performance results confirmed that an attached-growth SBR system using additional biomass on GAC is a promising configuration for wastewater treatment in terms of performance efficiency and process stability under fluctuations of organic load. Hence, this hybrid system is recommended for the treatment of pulp and paper mill effluents.

  1. The biogeochemical cycle of the adsorbed template. II - Selective adsorption of mononucleotides on adsorbed polynucleotide templates

    NASA Technical Reports Server (NTRS)

    Lazard, Daniel; Lahav, Noam; Orenberg, James B.

    1988-01-01

    Experimental results are presented for the verification of the specific interaction step of the 'adsorbed template' biogeochemical cycle, a simple model for a primitive prebiotic replication system. The experimental system consisted of gypsum as the mineral to which an oligonucleotide template attaches (Poly-C or Poly-U) and (5-prime)-AMP, (5-prime)-GMP, (5-prime)-CMP and (5-prime)-UMP as the interacting biomonomers. When Poly-C or Poly-U were used as adsorbed templates, (5-prime)-GMP and (5-prime)-AMP, respectively, were observed to be the most strongly adsorbed species.

  2. Recycling Lesson Plans.

    ERIC Educational Resources Information Center

    Pennsylvania State Dept. of Environmental Resources, Harrisburg.

    This document contains lesson plans about recycling for teachers in grades K-12. Titles include: (1) "Waste--Where Does It Come From? Where Does It Go?" (2) "Litter Detectives," (3) "Classroom Paper Recycling," (4) "Recycling Survey," (5) "Disposal and Recycling Costs," (6) "Composting Project," (7) Used Motor Oil Recycling," (8) "Unwrapping…

  3. Strategies for regeneration of nicotinamide coenzymes emphasizing self-sufficient closed-loop recycling systems.

    PubMed

    Hummel, Werner; Gröger, Harald

    2014-12-10

    Biocatalytic reduction reactions depending on nicotinamide coenzymes require an additional reaction to regenerate the consumed cofactor. For preparative application the preferred method is the simultaneous coupling of an in situ regeneration reaction. There are different strategically advantageous routes to achieve this goal. The standard method uses a second enzyme and a second co-substrate, for example formate and formate dehydrogenase or glucose and glucose dehydrogenase. Alternatively, a second substrate is employed which is converted by the same enzyme used for the primary reaction. For example, alcohol dehydrogenase catalyzed reactions are often coupled with excess 2-propanol which is oxidized to acetone during the regeneration of NAD(P)H. A third method utilizes a reaction-internal sequence by the direct coupling of an oxidizing and a reducing enzyme reaction. Neither an additional substrate nor a further regenerating enzyme are required for the recycling reaction. This kind of "closed-loop" or "self-sufficient" redox process for cofactor regeneration has been used rarely so far. Its most intriguing advantage is that even redox reactions with unstable precursors can be realized provided that this compound is produced in situ by an opposite redox reaction. This elegant method is applicable in special cases only but increasing numbers of examples have been published during the last years.

  4. Fenton-biological treatment of reverse osmosis membrane concentrate from a metal plating wastewater recycle system.

    PubMed

    Huang, R M; He, J Y; Zhao, J; Luo, Q; Huang, C M

    2011-04-01

    Although reverse osmosis (RO) has been widely used in the recycling of metal plating wastewater, organic compounds and heavy metals in the RO concentrate are difficult to remove by conventional treatment. A combination process including Fenton oxidation and a biological aerated filter was used to treat RO concentrate containing complex Cu and Ni from metal plating. During the Fenton treatment, Cu and Ni ions were released due to degradation of organic compounds and then removed by pH adjustment and coagulation. The concentrate was further treated using by a biological aerated filter. Optimum conditions were as follows: initial pH of influent of 4.0; dosage of H2O2 of 5.0 mmol l(-1); ratio of n(Fe2+)/n(H2O2) of 0.8; precipitation pH of Cu and Ni ions of 8.0; and a hydraulic retention time of the biological aerated filter of 2.5 h. The results showed that concentrations of effluent COD, Cu and Ni ions were less than 40 mg l(-1), 0.5 mg l(-1) and 0.3 mg l(-1), respectively; this means the treated effluent meets the emission standards for pollutants from electroplating set by China's Environmental Protection Agency. PMID:21877532

  5. A highly efficient ADH-coupled NADH-recycling system for the asymmetric bioreduction of carbon-carbon double bonds using enoate reductases.

    PubMed

    Tauber, Katharina; Hall, Melanie; Kroutil, Wolfgang; Fabian, Walter M F; Faber, Kurt; Glueck, Silvia M

    2011-06-01

    The asymmetric bioreduction of activated alkenes catalyzed by flavin-dependent enoate reductases from the OYE-family represents a powerful method for the production of optically active compounds. For its preparative-scale application, efficient and economic NADH-recycling is crucial. A novel enzyme-coupled NADH-recycling system is proposed based on the concurrent oxidation of a sacrificial sec-alcohol catalyzed by an alcohol dehydrogenase (ADH-A). Due to the highly favorable position of the equilibrium of ene-reduction versus alcohol-oxidation, the cosubstrate is only required in slight excess.

  6. [Development of the new desiccator system for measuring the removal effect of the formaldehyde as an indoor air pollutant by the adsorbent].

    PubMed

    Tsutsumi, Hiromu; Mihara, Yuichi; Ogawa, Norihiro; Hoshino, Toru; Kumagai, Takeshi; Yokota, Katsushi

    2005-06-01

    The new desiccator system with measures for the prevention of dew drops and the processing of the formaldehyde (FA) gas discharged from the final desiccator was produced, and the FA removal rate for various adsorbents was examined. For the prevention of dew drops in the desiccator, a hygroscopic bottle containing silica gel was used next to the FA gas generator, and humidity was adjusted by adjusting the interval between the FA gas outlet (a) and the desiccant (b). The removal of the harmful FA gas discharged from the final desiccator (n=5) is an important in the environmental preservation. To solve this problem, the FA gas was passed through an oxidation bottle containing KMnO(4)-H(2)SO(4) solution, and it was possible to confirm the complete decomposition of the FA by increase of the CO(2) and elimination of the FA. For the determination of the FA concentration in the desiccator, 100 ml air was beforehand collected using a gas collector into a 100 ml vial bottle containing 2 ml distilled water, and 50 ml of air from each desiccator was injected using a glass syringe. This was left under a slightly reduced pressure for 20 min, and the FA concentration was determined by the AHMT method. The FA removal rate after 1 h for each adsorbent (0.5 g) was 50% or more for chitin, KIMCO and silica gel. The removal efficacy for activated carbon was higher for fine particles than for coarse particles, and a dose-response relationship was established.

  7. Recyclability information for electronic equipment: A case study of a PC monitor and a system unit. Report for 1 June 1996--31 January 1998

    SciTech Connect

    Dammert, T.; Kuuva, M.

    1997-12-31

    This project was a part of a larger cooperation project (RecyTech) to develop prehandling technologies for recycling household appliances and electronics equipment. The project was based on two case products from companies participating in the RecyTech-project: a personal computer system unit by Fujitsu ICL Computers and a monitor by Nokia Display Products.

  8. County/private partnership expedites recycling

    SciTech Connect

    Not Available

    1994-03-01

    This article describes how Broward County, Florida and Browning-Ferris Industries (Houston, Texas) implemented a highly accelerated recycling project that had a county-wide recycling system fully operational in 180 days. The program is a strong step toward speeding compliance with Florida's mandated 30 percent recycling goal. The 1.2 million citizens in Broward County began recycling materials in dual curbside bins October 1, 1993. Previously, the participating communities all acted autonomously. Minimal volumes of newspaper, aluminum, clear glass, and some plastic were collected by curbsort vehicles and processed at small local recycling centers.

  9. Coal liquefaction with preasphaltene recycle

    DOEpatents

    Weimer, Robert F.; Miller, Robert N.

    1986-01-01

    A coal liquefaction system is disclosed with a novel preasphaltene recycle from a supercritical extraction unit to the slurry mix tank wherein the recycle stream contains at least 90% preasphaltenes (benzene insoluble, pyridine soluble organics) with other residual materials such as unconverted coal and ash. This subject process results in the production of asphaltene materials which can be subjected to hydrotreating to acquire a substitute for No. 6 fuel oil. The preasphaltene-predominant recycle reduces the hydrogen consumption for a process where asphaltene material is being sought.

  10. Continuous Recycle Enzymatic Membrane Reactor System for In-situ Production of Pure and Sterile Glucose Solution

    NASA Astrophysics Data System (ADS)

    Sarbatly, Rosalam; Krishnaiah, Duduku; England, Richard

    In this study, an efficient Continuous Recycle Enzymatic Membrane Reactor (CREMR) system for production of in-situ glucose solution was developed and the Simultaneous Gelatinization, Liquefaction and Saccharification (SGLS) carried out at temperatures below 60°C, is proposed to replace the conventional starch hydrolysis. Using a 30 kD polysulfone hollow fibre membrane and 10% (w/w) tapioca starch concentration, it is found that during the steady state continuous operation, the SGLS process in the CREMR at temperatures of 55 and 60°C and trans-membrane pressures of 0.5 and 1 bar has produced a steady state glucose concentration in the permeate stream as high as 64 g L-1 over a period of eight hours operation. The glucose solution obtained is of high purity greater than 99.9% and sterile, hence can be utilised as intravenous dripping solution and other medical products without post-treatments. In addition, the CREMR system is also relatively easy to scale-up, has a smaller footprint c.f. conventional systems, thus allowing in-situ production.

  11. Advanced Petroleum-Based Fuels - Diesel Emissions Project (APBF-DEC): 2,000-Hour Performance of a NOx Adsorber Catalyst and Diesel Particle Filter System for a Medium-Duty, Pick-Up Diesel Engine Platform; Final Report

    SciTech Connect

    Not Available

    2007-03-01

    Presents the results of a 2,000-hour test of an emissions control system consisting of a nitrogen oxides adsorber catalyst in combination with a diesel particle filter, advanced fuels, and advanced engine controls in an SUV/pick-up truck vehicle platform.

  12. Extending the life and recycle capability of earth storable propellant systems.

    NASA Technical Reports Server (NTRS)

    Schweickert, T. F.

    1972-01-01

    Rocket propulsion systems for reusable vehicles will be required to operate reliably for a large number of missions with a minimum of maintenance and a fast turnaround. For the space shuttle reaction control system to meet these requirements, current and prior related system failures were examined for their impact on reuse and, where warranted, component design and/or system configuration changes were defined for improving system service life. It was found necessary to change the pressurization component arrangement used on many single-use applications in order to eliminate a prevalent check valve failure mode and to incorporate redundant expulsion capability in propellant tank designs to achieve the necessary system reliability. Material flaws in pressurant and propellant tanks were noted to have a significant effect on tank cycle life. Finally, maintenance considerations dictated a modularized systems approach, allowing the system to be removed from the vehicle for service and repair at a remote site.

  13. Plastics recycling: challenges and opportunities

    PubMed Central

    Hopewell, Jefferson; Dvorak, Robert; Kosior, Edward

    2009-01-01

    Plastics are inexpensive, lightweight and durable materials, which can readily be moulded into a variety of products that find use in a wide range of applications. As a consequence, the production of plastics has increased markedly over the last 60 years. However, current levels of their usage and disposal generate several environmental problems. Around 4 per cent of world oil and gas production, a non-renewable resource, is used as feedstock for plastics and a further 3–4% is expended to provide energy for their manufacture. A major portion of plastic produced each year is used to make disposable items of packaging or other short-lived products that are discarded within a year of manufacture. These two observations alone indicate that our current use of plastics is not sustainable. In addition, because of the durability of the polymers involved, substantial quantities of discarded end-of-life plastics are accumulating as debris in landfills and in natural habitats worldwide. Recycling is one of the most important actions currently available to reduce these impacts and represents one of the most dynamic areas in the plastics industry today. Recycling provides opportunities to reduce oil usage, carbon dioxide emissions and the quantities of waste requiring disposal. Here, we briefly set recycling into context against other waste-reduction strategies, namely reduction in material use through downgauging or product reuse, the use of alternative biodegradable materials and energy recovery as fuel. While plastics have been recycled since the 1970s, the quantities that are recycled vary geographically, according to plastic type and application. Recycling of packaging materials has seen rapid expansion over the last decades in a number of countries. Advances in technologies and systems for the collection, sorting and reprocessing of recyclable plastics are creating new opportunities for recycling, and with the combined actions of the public, industry and governments it

  14. Plastics recycling: challenges and opportunities.

    PubMed

    Hopewell, Jefferson; Dvorak, Robert; Kosior, Edward

    2009-07-27

    Plastics are inexpensive, lightweight and durable materials, which can readily be moulded into a variety of products that find use in a wide range of applications. As a consequence, the production of plastics has increased markedly over the last 60 years. However, current levels of their usage and disposal generate several environmental problems. Around 4 per cent of world oil and gas production, a non-renewable resource, is used as feedstock for plastics and a further 3-4% is expended to provide energy for their manufacture. A major portion of plastic produced each year is used to make disposable items of packaging or other short-lived products that are discarded within a year of manufacture. These two observations alone indicate that our current use of plastics is not sustainable. In addition, because of the durability of the polymers involved, substantial quantities of discarded end-of-life plastics are accumulating as debris in landfills and in natural habitats worldwide. Recycling is one of the most important actions currently available to reduce these impacts and represents one of the most dynamic areas in the plastics industry today. Recycling provides opportunities to reduce oil usage, carbon dioxide emissions and the quantities of waste requiring disposal. Here, we briefly set recycling into context against other waste-reduction strategies, namely reduction in material use through downgauging or product reuse, the use of alternative biodegradable materials and energy recovery as fuel. While plastics have been recycled since the 1970s, the quantities that are recycled vary geographically, according to plastic type and application. Recycling of packaging materials has seen rapid expansion over the last decades in a number of countries. Advances in technologies and systems for the collection, sorting and reprocessing of recyclable plastics are creating new opportunities for recycling, and with the combined actions of the public, industry and governments it

  15. Plastics recycling: challenges and opportunities.

    PubMed

    Hopewell, Jefferson; Dvorak, Robert; Kosior, Edward

    2009-07-27

    Plastics are inexpensive, lightweight and durable materials, which can readily be moulded into a variety of products that find use in a wide range of applications. As a consequence, the production of plastics has increased markedly over the last 60 years. However, current levels of their usage and disposal generate several environmental problems. Around 4 per cent of world oil and gas production, a non-renewable resource, is used as feedstock for plastics and a further 3-4% is expended to provide energy for their manufacture. A major portion of plastic produced each year is used to make disposable items of packaging or other short-lived products that are discarded within a year of manufacture. These two observations alone indicate that our current use of plastics is not sustainable. In addition, because of the durability of the polymers involved, substantial quantities of discarded end-of-life plastics are accumulating as debris in landfills and in natural habitats worldwide. Recycling is one of the most important actions currently available to reduce these impacts and represents one of the most dynamic areas in the plastics industry today. Recycling provides opportunities to reduce oil usage, carbon dioxide emissions and the quantities of waste requiring disposal. Here, we briefly set recycling into context against other waste-reduction strategies, namely reduction in material use through downgauging or product reuse, the use of alternative biodegradable materials and energy recovery as fuel. While plastics have been recycled since the 1970s, the quantities that are recycled vary geographically, according to plastic type and application. Recycling of packaging materials has seen rapid expansion over the last decades in a number of countries. Advances in technologies and systems for the collection, sorting and reprocessing of recyclable plastics are creating new opportunities for recycling, and with the combined actions of the public, industry and governments it

  16. Time-resolved spectroscopy at surfaces and adsorbate dynamics:insights from a model-system approach

    NASA Astrophysics Data System (ADS)

    Boström, Emil; Mikkelsen, Anders; Verdozzi, Claudio

    We introduce a finite-system, model description of the initial stages of femtosecond laser induced desorption at surfaces. Using the exact many-body time evolution and also results from a novel time-dependent DFT description for electron-nuclear systems, we analyse the competition between several surface-response mechanisms and electronic correlations in the transient and longer time dynamics under the influence of dipole-coupled fields. Our model allows us to explore how coherent multiple-pulse protocols impact desorption in a variety of prototypical experiments.

  17. Data report. The fate of human enteric viruses in a natural sewage recycling system

    SciTech Connect

    Vaughn, J.M.; Landry, E.F.

    1980-09-01

    A two-year study was conducted to determine the virus-removing capacity of two man-made ecosystems designed for the treatment of raw domestic wastewater. The first treatment system consisted of two meadows followed by a marsh-pond unit (M/M/P). The second system contained individual marsh and pond units (M/P). All systems demonstrated moderate virus removal, with the marsh/pond system yielding the most consistent removal rates. Within this system, the greater potential for virus removal appeared to occur in the marsh unit. In addition to the production of system-oriented data, improved techniques for the concentration and enumeration of human viruses from sewage-polluted aquatic systems were developed.

  18. Ab initio study of Ga-GaN system: Transition from adsorbed metal atoms to a metal–semiconductor junction

    SciTech Connect

    Witczak, Przemysław; Kempisty, Pawel; Strak, Pawel

    2015-11-15

    Ab initio studies of a GaN(0001)-Ga system with various thicknesses of a metallic Ga layer were undertaken. The studied systems extend from a GaN(0001) surface with a fractional coverage of gallium atoms to a Ga-GaN metal–semiconductor (m–s) contact. Electronic properties of the system are simulated using density functional theory calculations for different doping of the bulk semiconductor. It is shown that during transition from a bare GaN(0001) surface to a m–s heterostructure, the Fermi level stays pinned at a Ga-broken bond highly dispersive surface state to Ga–Ga states at the m–s interface. Adsorption of gallium leads to an energy gain of about 4 eV for a clean GaN(0001) surface and the energy decreases to 3.2 eV for a thickly Ga-covered surface. The transition to the m–s interface is observed. For a thick Ga overlayer such interface corresponds to a Schottky contact with a barrier equal to 0.9 and 0.6 eV for n- and p-type, respectively. Bond polarization-related dipole layer occurring due to an electron transfer to the metal leads to a potential energy jump of 1.5 eV, independent on the semiconductor doping. Additionally high electron density in the Ga–Ga bond region leads to an energy barrier about 1.2 eV high and 4 Å wide. This feature may adversely affect the conductivity of the n-type m–s system.

  19. Applicability of a septic tank/engineered wetland coupled system in the treatment and recycling of wastewater from a small community.

    PubMed

    Mbuligwe, Stephen E

    2005-01-01

    A septic tank (ST)/engineered wetland coupled system used to treat and recycle wastewater from a small community in Dar es Salaam, Tanzania was monitored to assess its performance. The engineered wetland system (EWS) had two parallel units each with two serial beds packed with different sizes of media and vegetated differently. The larger-sized medium bed was upstream and was planted with Phragmites (reeds) and the smaller-sized medium bed was downstream and was planted with Typha (cattails). The ST/EWS coupled system was able to remove ammonia by an average of 60%, nitrate by 71%, sulfate by 55%, chemical oxygen demand by 91%, and fecal coliform as well as total coliform by almost 100%. The effluent from the ST/EWS coupled system is used for irrigation. Notably, users of the recycled irrigation water do not harbor any negative feelings about it. This study demonstrates that it is possible to treat and recycle domestic wastewater using ST/ EWS coupled systems. The study also brings attention to the fact that an ST/EWS coupled system has operation and maintenance (O&M) needs that must be fulfilled for its effectiveness and acceptability. These include removal of unwanted weeds, harvesting of wetland plants when the EWS becomes unappealingly bushy, and routine repair.

  20. Green Science: Revisiting Recycling

    ERIC Educational Resources Information Center

    Palliser, Janna

    2011-01-01

    Recycling has been around for a long time--people have reused materials and refashioned them into needed items for thousands of years. More recently, war efforts encouraged conservation and reuse of materials, and in the 1970s recycling got its official start when recycling centers were created. Now, curbside recycling programs and recycling…

  1. Solvent cleaning system and method for removing contaminants from solvent used in resin recycling

    DOEpatents

    Bohnert, George W.; Hand, Thomas E.; DeLaurentiis, Gary M.

    2009-01-06

    A two step solvent and carbon dioxide based system that produces essentially contaminant-free synthetic resin material and which further includes a solvent cleaning system for periodically removing the contaminants from the solvent so that the solvent can be reused and the contaminants can be collected and safely discarded in an environmentally safe manner.

  2. Expansion Hamiltonian model for a diatomic molecule adsorbed on a surface: Vibrational states of the CO/Cu(100) system including surface vibrations

    SciTech Connect

    Meng, Qingyong; Meyer, Hans-Dieter

    2015-10-28

    Molecular-surface studies are often done by assuming a corrugated, static (i.e., rigid) surface. To be able to investigate the effects that vibrations of surface atoms may have on spectra and cross sections, an expansion Hamiltonian model is proposed on the basis of the recently reported [R. Marquardt et al., J. Chem. Phys. 132, 074108 (2010)] SAP potential energy surface (PES), which was built for the CO/Cu(100) system with a rigid surface. In contrast to other molecule-surface coupling models, such as the modified surface oscillator model, the coupling between the adsorbed molecule and the surface atoms is already included in the present expansion SAP-PES model, in which a Taylor expansion around the equilibrium positions of the surface atoms is performed. To test the quality of the Taylor expansion, a direct model, that is avoiding the expansion, is also studied. The latter, however, requests that there is only one movable surface atom included. On the basis of the present expansion and direct models, the effects of a moving top copper atom (the one to which CO is bound) on the energy levels of a bound CO/Cu(100) system are studied. For this purpose, the multiconfiguration time-dependent Hartree calculations are carried out to obtain the vibrational fundamentals and overtones of the CO/Cu(100) system including a movable top copper atom. In order to interpret the results, a simple model consisting of two coupled harmonic oscillators is introduced. From these calculations, the vibrational levels of the CO/Cu(100) system as function of the frequency of the top copper atom are discussed.

  3. Atmosphere stabilization and element recycle in an experimental mouse-algal system

    NASA Technical Reports Server (NTRS)

    Smernoff, David T.

    1986-01-01

    Life support systems based on bioregeneration rely on the control and manipulation of organisms. Experiments conducted with a gas-closed mouse-algal system designed to investigate principles of photosynthetic gas exchange focus primarily on observing gas exchange phenomena under varying algal environmental conditions and secondarily on studying element cycling through compartments of the experimental system. Inherent instabilities exit between the uptake and release of carbon dioxide CO2 and oxygen O2 by the mouse and algae. Variations in light intensity and cell density alter the photosynthetic rate of the algae and enable maintenance of physiologic concentrations of CO2 and O2. Different nitrogen sources (urea and nitrate) result in different algal assimilatory quotients (AQ). Combinations of photosynthetic rate and AQ ratio manipulations have been examined for their potential in stabilizing atmospheric gas concentrations in the gas-closed algal-mouse system. Elemental mass balances through the experimental systems compartments are being studied with the concurrent development of a mathematical simulation model. Element cycling experiments include quantification of elemental flows through system compartments and wet oxidation of system waste materials for use as an algal nutrient source. Oxidized waste products demonstrate inhibitory properties although dilution has been shown to allow normal growth.

  4. Volatiles and subduction-recycled lithologies in the petrogenesis of Cenozoic alkaline magmatism in the West Antarctic Rift System

    NASA Astrophysics Data System (ADS)

    Aviado, K.; Rilling-Hall, S.; Mukasa, S. B.; Bryce, J. G.; Fahnestock, M. F.

    2015-12-01

    In the West Antarctic Rift System (WARS), the failure of both passive and active models of decompression melting to explain unusually voluminous Cenozoic volcanism has prompted debate about the roles of thermal plume-related melting and ancient subduction-related flux melting. The latter is supported by ~500 Ma of subduction along the paleo-Pacific margin of Gondwana[1], a process capable of generating easily fusible, volatile-rich lithologies and producing the broad seismic low-velocity anomaly imaged beneath the Southern Ocean[2]. We present new geochemical information from submarine lavas in the Ross Sea and subaerial lavas from Franklin Island, Beaufort Island, and Mt. Melbourne in Northern Victoria Land (NVL) supportive of an evolving fluxed mantle source. Lavas exhibit ocean island basalt (OIB)-like trace element signatures and isotopic affinities for the C/FOZO mantle endmember consistent with subduction processing of recycled ocean lithosphere. Lava major-oxide compositions suggest multiple recycled source components, including pyroxenite (associated with older lavas), amphibole-rich metasomes, and volatilized peridotite (associated with the youngest lavas). In-situ analyses of olivine-hosted melt inclusions (MIs) from a subset of host lavas confirm high H2O and CO2 ranging up to 2.94 wt % and 4657 ppm, respectively. MIs exhibit OIB-like trace element compositions and Ba/Rb and Rb/Sr consistent with melting in the presence of hydrated, amphibole-bearing lithosphere[3,4]. We interpret these observations as evidence that ongoing tectonomagmatic activity in the WARS is facilitated by melting of subduction-modified mantle generated by 550 - 100 Ma Gondwana subduction. Following radiogenic ingrowth in high-µ (U/Pb) domains, Cenozoic extension triggered decompression melting of easily fusible, hydrated metasomes and volatilized mantle. This multistage magma model attempts to reconcile geochemical observations with increasing geophysical evidence that the seismic

  5. Physical properties of single phospholipid bilayers adsorbed to micro glass beads. A new vesicular model system studied by 2H-nuclear magnetic resonance.

    PubMed

    Bayerl, T M; Bloom, M

    1990-08-01

    Spherical supported vesicles (SSVs), a new model system consisting of single dimyristoyl phosphatidylcholine (DMPC) bilayers adsorbed to spherical glass beads with a narrow size distribution, were prepared at two different sizes (0.5 and 1.5 microns) and their physical properties were studied by deuterium nuclear magnetic resonance (2H-NMR). Such SSV samples can be prepared at any desired size between 0.3 and 10 microns. The 2H-NMR measurements provide evidence for a strong dependence of the spectra and the transverse relaxation times on the curvature of the SSVs in a diameter range between 0.5 and 1.5 microns. For larger SSVs (1.5 microns diameter) their powder spectra and their calculated oriented spectra are similar to those obtained for multilamellar dispersions of DMPC-d54. The lineshape of the smaller SSVs exhibits a temperature dependence which is not found in multilamellar samples. The SSVs are stable in the liquid crystalline phase over days but irreversibly change to multilamellar vesicles in the gel state. The average thickness of the water layer between the single bilayer and the glass bead surface was estimated by 1H-NMR to e 17 +/- 5 A.

  6. Physical properties of single phospholipid bilayers adsorbed to micro glass beads. A new vesicular model system studied by 2H-nuclear magnetic resonance.

    PubMed Central

    Bayerl, T M; Bloom, M

    1990-01-01

    Spherical supported vesicles (SSVs), a new model system consisting of single dimyristoyl phosphatidylcholine (DMPC) bilayers adsorbed to spherical glass beads with a narrow size distribution, were prepared at two different sizes (0.5 and 1.5 microns) and their physical properties were studied by deuterium nuclear magnetic resonance (2H-NMR). Such SSV samples can be prepared at any desired size between 0.3 and 10 microns. The 2H-NMR measurements provide evidence for a strong dependence of the spectra and the transverse relaxation times on the curvature of the SSVs in a diameter range between 0.5 and 1.5 microns. For larger SSVs (1.5 microns diameter) their powder spectra and their calculated oriented spectra are similar to those obtained for multilamellar dispersions of DMPC-d54. The lineshape of the smaller SSVs exhibits a temperature dependence which is not found in multilamellar samples. The SSVs are stable in the liquid crystalline phase over days but irreversibly change to multilamellar vesicles in the gel state. The average thickness of the water layer between the single bilayer and the glass bead surface was estimated by 1H-NMR to e 17 +/- 5 A. PMID:2207243

  7. Recycle Waste Collection Tank (RWCT) simulant testing in the PVTD feed preparation system

    SciTech Connect

    Abrigo, G.P.; Daume, J.T.; Halstead, S.D.; Myers, R.L.; Beckette, M.R.; Freeman, C.J.; Hatchell, B.K.

    1996-03-01

    (This is part of the radwaste vitrification program at Hanford.) RWCT was to routinely receive final canister decontamination sand blast frit and rinse water, Decontamination Waste Treatment Tank bottoms, and melter off-gas Submerged Bed Scrubber filter cake. In order to address the design needs of the RWCT system to meet performance levels, the PNL Vitrification Technology (PVTD) program used the Feed Preparation Test System (FPTS) to evaluate its equipment and performance for a simulant of RWCT slurry. (FPTS is an adaptation of the Defense Waste Processing Facility feed preparation system and represents the initially proposed Hanford Waste Vitrification Plant feed preparation system designed by Fluor-Daniel, Inc.) The following were determined: mixing performance, pump priming, pump performance, simulant flow characterization, evaporator and condenser performance, and ammonia dispersion. The RWCT test had two runs, one with and one without tank baffles.

  8. Black Molecular Adsorber Coatings for Spaceflight Applications

    NASA Technical Reports Server (NTRS)

    Abraham, Nithin Susan; Hasegawa, Mark Makoto; Straka, Sharon A.

    2014-01-01

    The molecular adsorber coating is a new technology that was developed to mitigate the risk of on-orbit molecular contamination on spaceflight missions. The application of this coating would be ideal near highly sensitive, interior surfaces and instruments that are negatively impacted by outgassed molecules from materials, such as plastics, adhesives, lubricants, epoxies, and other similar compounds. This current, sprayable paint technology is comprised of inorganic white materials made from highly porous zeolite. In addition to good adhesion performance, thermal stability, and adsorptive capability, the molecular adsorber coating offers favorable thermal control characteristics. However, low reflectivity properties, which are typically offered by black thermal control coatings, are desired for some spaceflight applications. For example, black coatings are used on interior surfaces, in particular, on instrument baffles for optical stray light control. Similarly, they are also used within light paths between optical systems, such as telescopes, to absorb light. Recent efforts have been made to transform the white molecular adsorber coating into a black coating with similar adsorptive properties. This result is achieved by optimizing the current formulation with black pigments, while still maintaining its adsorption capability for outgassing control. Different binder to pigment ratios, coating thicknesses, and spray application techniques were explored to develop a black version of the molecular adsorber coating. During the development process, coating performance and adsorption characteristics were studied. The preliminary work performed on black molecular adsorber coatings thus far is very promising. Continued development and testing is necessary for its use on future contamination sensitive spaceflight missions.

  9. Black molecular adsorber coatings for spaceflight applications

    NASA Astrophysics Data System (ADS)

    Abraham, Nithin S.; Hasegawa, Mark M.; Straka, Sharon A.

    2014-09-01

    The molecular adsorber coating is a new technology that was developed to mitigate the risk of on-orbit molecular contamination on spaceflight missions. The application of this coating would be ideal near highly sensitive, interior surfaces and instruments that are negatively impacted by outgassed molecules from materials, such as plastics, adhesives, lubricants, epoxies, and other similar compounds. This current, sprayable paint technology is comprised of inorganic white materials made from highly porous zeolite. In addition to good adhesion performance, thermal stability, and adsorptive capability, the molecular adsorber coating offers favorable thermal control characteristics. However, low reflectivity properties, which are typically offered by black thermal control coatings, are desired for some spaceflight applications. For example, black coatings are used on interior surfaces, in particular, on instrument baffles for optical stray light control. Similarly, they are also used within light paths between optical systems, such as telescopes, to absorb light. Recent efforts have been made to transform the white molecular adsorber coating into a black coating with similar adsorptive properties. This result is achieved by optimizing the current formulation with black pigments, while still maintaining its adsorption capability for outgassing control. Different binder to pigment ratios, coating thicknesses, and spray application techniques were explored to develop a black version of the molecular adsorber coating. During the development process, coating performance and adsorption characteristics were studied. The preliminary work performed on black molecular adsorber coatings thus far is very promising. Continued development and testing is necessary for its use on future contamination sensitive spaceflight missions.

  10. Observations on gas exchange and element recycle within a gas-closed algal-mouse system

    NASA Technical Reports Server (NTRS)

    Smernoff, D. T.; Wharton, R. A., Jr.; Averner, M. M.

    1986-01-01

    Life support systems based on bioregeneration rely on the control and manipulation of organisms. Algae are potentially useful for a variety of Closed Ecological Life Support System (CELSS) functions including the revitalization of atmospheres, production of food and for nitrogen fixation. The results of experiments conducted with a gas-closed algal-mouse system designed to investigate gas exchange phenomena under varying algal environmental conditions, and the ability of algae to utilize oxidized mouse solid waste are reported. Inherent instabilities exist between the uptake and release of carbon dioxide (CO2) and oxygen (O2) by the mouse and algae in a gas-closed system. Variations in light intensity and cell density alter the photosynthetic rate of the algae and enable short-term steady-state concentrations of atmospheric CO2 and O2. Different nitrogen sources (urea and nitrate) result in different algal assimilatory quotients (AQ). Combinations of photosynthetic rate and AQ ratio manipulations were examined for their potential in stabilizing atmospheric gas concentrations in the gas-closed algal-mouse system.

  11. Assessment of polycarbonate filter in a molecular analytical system for the microbiological quality monitoring of recycled waters onboard ISS.

    PubMed

    Bechy-Loizeau, Anne-Laure; Flandrois, Jean-Pierre; Abaibou, Hafid

    2015-07-01

    On the ISS, as on Earth, water is an essential element for life and its quality control on a regular basis allows to ensure the health of the crew and the integrity of equipment. Currently, microbial water analysis onboard ISS still relies on the traditional culture-based microbiology methods. Molecular methods based on the amplification of nucleic acids for microbiological analysis of water quality show enormous potential and are considered as the best alternative to culture-based methods. For this reason, the Midass, a fully integrated and automated prototype was designed conjointly by ESA and bioMérieux for a rapid monitoring of the microbiological quality of air. The prototype allows air sampling, sample processing and the amplification/detection of nucleic acids. We describe herein the proof of principle of an analytical approach based on molecular biology that could fulfill the ESA's need for a rapid monitoring of the microbiological quality of recycled water onboard ISS. Both concentration and recovery of microorganisms are the main critical steps when the microfiltration technology is used for water analysis. Among filters recommended standards for monitoring the microbiological quality of the water, the polycarbonate filter was fully in line with the requirements of the ISO 7704-1985 standard in terms of efficacy of capture and recovery of bacteria. Moreover, this filter does not retain nucleic acids on the surface and has no inhibitory effect on their downstream processing steps such as purification and amplification/detection. Although the Midass system was designed for the treatment of air samples, the first results on the integration of PC filters were encouraging. Nevertheless, system modifications are needed to better adapt the Midass system for the monitoring of the microbiological water quality.

  12. Assessment of polycarbonate filter in a molecular analytical system for the microbiological quality monitoring of recycled waters onboard ISS

    NASA Astrophysics Data System (ADS)

    Bechy-Loizeau, Anne-Laure; Flandrois, Jean-Pierre; Abaibou, Hafid

    2015-07-01

    On the ISS, as on Earth, water is an essential element for life and its quality control on a regular basis allows to ensure the health of the crew and the integrity of equipment. Currently, microbial water analysis onboard ISS still relies on the traditional culture-based microbiology methods. Molecular methods based on the amplification of nucleic acids for microbiological analysis of water quality show enormous potential and are considered as the best alternative to culture-based methods. For this reason, the Midass, a fully integrated and automated prototype was designed conjointly by ESA and bioMérieux for a rapid monitoring of the microbiological quality of air. The prototype allows air sampling, sample processing and the amplification/detection of nucleic acids. We describe herein the proof of principle of an analytical approach based on molecular biology that could fulfill the ESA's need for a rapid monitoring of the microbiological quality of recycled water onboard ISS. Both concentration and recovery of microorganisms are the main critical steps when the microfiltration technology is used for water analysis. Among filters recommended standards for monitoring the microbiological quality of the water, the polycarbonate filter was fully in line with the requirements of the ISO 7704-1985 standard in terms of efficacy of capture and recovery of bacteria. Moreover, this filter does not retain nucleic acids on the surface and has no inhibitory effect on their downstream processing steps such as purification and amplification/detection. Although the Midass system was designed for the treatment of air samples, the first results on the integration of PC filters were encouraging. Nevertheless, system modifications are needed to better adapt the Midass system for the monitoring of the microbiological water quality.

  13. Assessment of polycarbonate filter in a molecular analytical system for the microbiological quality monitoring of recycled waters onboard ISS.

    PubMed

    Bechy-Loizeau, Anne-Laure; Flandrois, Jean-Pierre; Abaibou, Hafid

    2015-07-01

    On the ISS, as on Earth, water is an essential element for life and its quality control on a regular basis allows to ensure the health of the crew and the integrity of equipment. Currently, microbial water analysis onboard ISS still relies on the traditional culture-based microbiology methods. Molecular methods based on the amplification of nucleic acids for microbiological analysis of water quality show enormous potential and are considered as the best alternative to culture-based methods. For this reason, the Midass, a fully integrated and automated prototype was designed conjointly by ESA and bioMérieux for a rapid monitoring of the microbiological quality of air. The prototype allows air sampling, sample processing and the amplification/detection of nucleic acids. We describe herein the proof of principle of an analytical approach based on molecular biology that could fulfill the ESA's need for a rapid monitoring of the microbiological quality of recycled water onboard ISS. Both concentration and recovery of microorganisms are the main critical steps when the microfiltration technology is used for water analysis. Among filters recommended standards for monitoring the microbiological quality of the water, the polycarbonate filter was fully in line with the requirements of the ISO 7704-1985 standard in terms of efficacy of capture and recovery of bacteria. Moreover, this filter does not retain nucleic acids on the surface and has no inhibitory effect on their downstream processing steps such as purification and amplification/detection. Although the Midass system was designed for the treatment of air samples, the first results on the integration of PC filters were encouraging. Nevertheless, system modifications are needed to better adapt the Midass system for the monitoring of the microbiological water quality. PMID:26256625

  14. Continuous matrix assisted refolding of alpha-lactalbumin by ion exchange chromatography with recycling of aggregates combined with ultradiafiltration.

    PubMed

    Machold, Christine; Schlegl, Robert; Buchinger, Wolfgang; Jungbauer, Alois

    2005-07-01

    Continuous matrix assisted refolding (MAR) can be achieved on a solid support by using a continuous chromatographic system. Recycling the aggregate fraction, simultaneously formed during a refolding reaction, can further increase the refolding yield. Due to the nature of this reaction, aggregates are the main reason for a refolding yield below stoichiometric conversion. A preparative continuous annular chromatographic system (P-CAC) equipped with an ion exchange resin was used to continuously refold the model protein alpha-lactalbumin. For this purpose, this protein was denatured, reduced and adsorbed on the ion exchange resin. Elution was performed with or without redox reagents in the buffer system permitting fast formation of the native disulfide bonds. In the case redox reagents were present, the protein refolds then during its residence time on the matrix. However, aggregate formation is also increased and refolding yields are lower. Tightly bound aggregates were removed from the column by 2M guanidinium hydrochloride. In order to increase the system yield, this aggregate fraction was recycled after lowering the conductivity by ultradiafiltration and adjustment of the protein concentration by dilution. For on-column refolding, recycling of aggregates at a recycling rate of 0.17 increased the system yield from 25% to 30%. An algorithm was developed to show interdependencies of the single influencing parameters. The operability of the system was demonstrated but limitations due to instability of the P-CAC, especially inhomogeneous flow and peak wobbling, have to be considered.

  15. Mineral separation and recycle in a Controlled Ecological Life Support System (CELSS)

    NASA Technical Reports Server (NTRS)

    Ballou, E. V.

    1982-01-01

    The background of the mineral nutrition needs of plants are examined along with the applicability of mineral control and separation to a controlled ecological life support system (CELSS). Steps that may be taken in a program to analytically define and experimentally test key mineral control concepts in the nutritional and waste processing loops of a CELSS are delineated.

  16. Evaluation of regional bioenergy recovery by local methane fermentation thermal recycling systems.

    PubMed

    Wong, Looi-Fang; Fujita, Tsuyoshi; Xu, Kaiqin

    2008-11-01

    This paper evaluates the potential for regional bioenergy recovery as electricity and heat by small-scale methane fermentation systems from organic waste matter generated from urban, industrial, and agricultural sectors. Biogas production functions of high-strength organic wastes are derived from data of implemented methane fermentation systems. The distributions of organic wastes from sewage, household, wholesale/retail, manufacturing, farming, and livestock activities in the Tokyo Bay region are calibrated into a disaggregated spatial database by compiling general activity statistics and emission intensity parameters using Geographic Information System (GIS). Three scenarios of organic matter circulation by co-digestion in sewage treatment plants (STPs) are designed and assessed. Surplus electricity and heat from methane fermentation systems are used for STP operations and household demand. The spatial database allows a preliminary examination for the suitability of locations for technology implementation from the aspects of bioenergy supply and balance. The results show that an additional 368,000-1,328,000 MW of electricity would be generated, and 1300-3600 TJ of heat could be used by households, reducing the annual emissions of CO2 from fossil fuels by 307,000-798,000 t. PMID:18166448

  17. Titanium-incorporated organic–inorganic hybrid adsorbent for improved CO{sub 2} adsorption performance

    SciTech Connect

    Zhang, Xiaoyun; Qin, Hongyan; Zhang, Sisi; Wu, Wei

    2015-02-15

    Highlights: • Titanium-incorporated organic–inorganic hybrid adsorbent was prepared. • The incorporation of Ti to the adsorbent showed significant effect. • The sorbent shows high CO{sub 2} capture capacity both in pure and diluted CO{sub 2} at RT. • The sorbent exhibits a high recycling stability after 15 cycling runs. - Abstract: The CO{sub 2} adsorption performance of acrylonitrile (AN)–tetraethylenepentamine (TEPA) adduct (hereafter referred to as TN) impregnated adsorbent was greatly enhanced by introduction of Titanium atom into the silica matrix. The adsorbents were characterized by X-ray fluorescence spectrometry (XRF), X-ray diffraction (XRD), transmission electron microscopy (TEM), N{sub 2} adsorption/desorption, UV–vis spectroscopy, Fourier transform infrared (FTIR) spectroscopy. The adsorption experiments together with the physicochemical characterization demonstrated that these adsorbents containing an optimal amount of Titanium (Ti/Si ≈ 0.1) remarkably reinforced the CO{sub 2} adsorption capacity and recycling stability. The highest CO{sub 2} uptakes reached 4.65 and 1.80 mmol CO{sub 2}/g adsorbent at 25 °C under 90% CO{sub 2} (CO{sub 2}/N{sub 2}, 90:10 V/V) and 1% CO{sub 2} (CO{sub 2}/N{sub 2}, 1:99 V/V) conditions for sample Ti(0.1)-DMS-TN, respectively. Repeated adsorption/desorption cycles revealed that the Ti-incorporated adsorbent showed only a tiny decrease in adsorption capacity (1.778 mmol CO{sub 2}/g adsorbent after 15 cycles, decreased by 0.95%), significantly enhanced the adsorbent recycling stability.

  18. Integrated system for temperature-controlled fast protein liquid chromatography. II. Optimized adsorbents and 'single column continuous operation'.

    PubMed

    Cao, Ping; Müller, Tobias K H; Ketterer, Benedikt; Ewert, Stephanie; Theodosiou, Eirini; Thomas, Owen R T; Franzreb, Matthias

    2015-07-17

    Continued advance of a new temperature-controlled chromatography system, comprising a column filled with thermoresponsive stationary phase and a travelling cooling zone reactor (TCZR), is described. Nine copolymer grafted thermoresponsive cation exchangers (thermoCEX) with different balances of thermoresponsive (N-isopropylacrylamide), hydrophobic (N-tert-butylacrylamide) and negatively charged (acrylic acid) units were fashioned from three cross-linked agarose media differing in particle size and pore dimensions. Marked differences in grafted copolymer composition on finished supports were sourced to base matrix hydrophobicity. In batch binding tests with lactoferrin, maximum binding capacity (qmax) increased strongly as a function of charge introduced, but became increasingly independent of temperature, as the ability of the tethered copolymer networks to switch between extended and collapsed states was lost. ThermoCEX formed from Sepharose CL-6B (A2), Superose 6 Prep Grade (B2) and Superose 12 Prep Grade (C1) under identical conditions displayed the best combination of thermoresponsiveness (qmax,50°C/qmax,10°C ratios of 3.3, 2.2 and 2.8 for supports 'A2', 'B2' and 'C1' respectively) and lactoferrin binding capacity (qmax,50°C∼56, 29 and 45mg/g for supports 'A2', 'B2' and 'C1' respectively), and were selected for TCZR chromatography. With the cooling zone in its parked position, thermoCEX filled columns were saturated with lactoferrin at a binding temperature of 35°C, washed with equilibration buffer, before initiating the first of 8 or 12 consecutive movements of the cooling zone along the column at 0.1mm/s. A reduction in particle diameter (A2→B2) enhanced lactoferrin desorption, while one in pore diameter (B2→C1) had the opposite effect. In subsequent TCZR experiments conducted with thermoCEX 'B2' columns continuously fed with lactoferrin or 'lactoferrin+bovine serum albumin' whilst simultaneously moving the cooling zone, lactoferrin was

  19. S. 2408: A Bill to establish a system for labeling of plastic resin products, and to promote recycling of plastics and use of degradable plastics. Introduced in the Senate of the United States, One Hundredth First Congress, Second Session, April 3, 1990

    SciTech Connect

    Not Available

    1990-01-01

    S. 2408 is a bill to establish a system for labeling of plastic resin products, and to promote recycling of plastics and use of degradable plastics. The objective is reduction of solid wastes through recycling and use of biodegradable plastics.

  20. Novel biological recycling water purification system for use in fish toxicology studies

    SciTech Connect

    Veriangieri, A.J.; Lewis, R.M.; Bannon, A.W.; Wilson, M.C.

    1988-02-01

    A major problem with fish toxicity testing has been maintaining an adequate supply of healthy, acclimated fish in the laboratory setting from which test populations can be obtained. The build-up of metabolic waste (ammonia) in holding tank environments leads to a stressful situation for the fish, resulting in mortality or erroneous toxicity data. Ammonia is the principal nitrogenous waste product of catfish and is excreted primarily as the toxic unionized ammonia from the gills. The purpose of this study was to develop a novel biological filter system which facilitates the nitrification process, thereby removing or controlling the build-up of toxic metabolic waste products in holding tanks in the laboratory. This system would provide a healthy, non-stressful environment for blue channel catfish (Ictalurus Punctatus) fingerlings prior to their use in LC50 determinations of various insecticides, herbicides, and fungicides currently employed in the vicinity of catfish ponds or farms.

  1. Recycler barrier RF buckets

    SciTech Connect

    Bhat, C.M.; /Fermilab

    2011-03-01

    The Recycler Ring at Fermilab uses a barrier rf systems for all of its rf manipulations. In this paper, I will give an overview of historical perspective on barrier rf system, the longitudinal beam dynamics issues, aspects of rf linearization to produce long flat bunches and methods used for emittance measurements of the beam in the RR barrier rf buckets. Current rf manipulation schemes used for antiproton beam stacking and longitudinal momentum mining of the RR beam for the Tevatron collider operation are explained along with their importance in spectacular success of the Tevatron luminosity performance.

  2. A plant culture system for producing food and recycling materials with sweetpotato in space

    NASA Astrophysics Data System (ADS)

    Kitaya, Yoshiaki; Yano, Sachiko; Hirai, Hiroaki

    2016-07-01

    The long term human life support in space is greatly dependent on the amounts of food, atmospheric O2 and clean water produced by plants. Therefore, the bio-regenerative life support system such as space farming with scheduling of crop production, obtaining high yields with a rapid turnover rate, converting atmospheric CO2 to O2 and purifying water should be established with employing suitable plant species and varieties and precisely controlling environmental variables around plants grown at a high density in a limited space. We are developing a sweetpotato culture system for producing tuberous roots as a high-calorie food and fresh edible leaves and stems as a nutritive functional vegetable food in space. In this study, we investigated the ability of food production, CO2 to O2 conversion through photosynthesis, and clean water production through transpiration in the sweetpotato production system. The biomass of edible parts in the whole plant was almost 100%. The proportion of the top (leaves and stems) and tuberous roots was strongly affected by environmental variables even when the total biomass production was mostly the same. The production of biomass and clean water was controllable especially by light, atmospheric CO2 and moisture and gas regimes in the root zone. It was confirmed that sweetpotato can be utilized for the vegetable crop as well as the root crop allowing a little waste and is a promising functional crop for supporting long-duration human activity in space.

  3. Environmental monitoring of selected pesticides and organic chemicals in urban stormwater recycling systems using passive sampling techniques

    NASA Astrophysics Data System (ADS)

    Page, Declan; Miotliński, Konrad; Gonzalez, Dennis; Barry, Karen; Dillon, Peter; Gallen, Christie

    2014-03-01

    Water recycling via aquifers has become a valuable tool to augment urban water supplies in many countries. This study reports the first use of passive samplers for monitoring of organic micropollutants in Managed Aquifer Recharge (MAR). Five different configurations of passive samplers were deployed in a stormwater treatment wetland, groundwater monitoring wells and a recovery tank to capture a range of polar and non-polar micropollutants present in the system. The passive samplers were analysed for a suite of pesticides, polycyclic aromatic hydrocarbons (PAHs) and other chemicals. As a result, 17 pesticides and pesticide degradation products, 5 PAHs and 8 other organic chemicals including flame retardants and fragrances were detected in urban stormwater recharging Aquifer Storage and Recovery (ASR) and an Aquifer Storage Transfer and Recovery (ASTR) system. Of the pesticides detected, diuron, metolachlor and chlorpyrifos were generally detected at the highest concentrations in one or more passive samplers, whereas chlorpyrifos, diuron, metolachlor, simazine, galaxolide and triallate were detected in multiple samplers. Fluorene was the PAH detected at the highest concentration and the flame retardant Tris(1-chloro-2-propyl)phosphate was the chemical detected in the greatest abundance at all sites. The passive samplers showed different efficiencies for capture of micropollutants with the Empore disc samplers giving the most reliable results. The results indicate generally low levels of organic micropollutants in the stormwater, as the contaminants detected were present at very low ng/L levels, generally two to four orders of magnitude below the drinking water guidelines (NHMRC, 2011). The efficiency of attenuation of these organic micropollutants during MAR was difficult to determine due to variations in the source water concentrations. Comparisons were made between different samplers, to give a field-based calibration where existing lab-based calibrations were

  4. Environmental monitoring of selected pesticides and organic chemicals in urban stormwater recycling systems using passive sampling techniques.

    PubMed

    Page, Declan; Miotliński, Konrad; Gonzalez, Dennis; Barry, Karen; Dillon, Peter; Gallen, Christie

    2014-03-01

    Water recycling via aquifers has become a valuable tool to augment urban water supplies in many countries. This study reports the first use of passive samplers for monitoring of organic micropollutants in Managed Aquifer Recharge (MAR). Five different configurations of passive samplers were deployed in a stormwater treatment wetland, groundwater monitoring wells and a recovery tank to capture a range of polar and non-polar micropollutants present in the system. The passive samplers were analysed for a suite of pesticides, polycyclic aromatic hydrocarbons (PAHs) and other chemicals. As a result, 17 pesticides and pesticide degradation products, 5 PAHs and 8 other organic chemicals including flame retardants and fragrances were detected in urban stormwater recharging Aquifer Storage and Recovery (ASR) and an Aquifer Storage Transfer and Recovery (ASTR) system. Of the pesticides detected, diuron, metolachlor and chlorpyrifos were generally detected at the highest concentrations in one or more passive samplers, whereas chlorpyrifos, diuron, metolachlor, simazine, galaxolide and triallate were detected in multiple samplers. Fluorene was the PAH detected at the highest concentration and the flame retardant Tris(1-chloro-2-propyl)phosphate was the chemical detected in the greatest abundance at all sites. The passive samplers showed different efficiencies for capture of micropollutants with the Empore disc samplers giving the most reliable results. The results indicate generally low levels of organic micropollutants in the stormwater, as the contaminants detected were present at very low ng/L levels, generally two to four orders of magnitude below the drinking water guidelines (NHMRC, 2011). The efficiency of attenuation of these organic micropollutants during MAR was difficult to determine due to variations in the source water concentrations. Comparisons were made between different samplers, to give a field-based calibration where existing lab-based calibrations were

  5. Response of graywater recycling systems based on hydroponic plant growth to three classes of surfactants.

    PubMed

    Garland, J L; Levine, L H; Yorio, N C; Hummerick, M E

    2004-04-01

    Anionic (sodium laureth sulfate, SLES), amphoteric (cocamidopropyl betaine, CAPB) and nonionic (alcohol polyethoxylate, AE) surfactants were added to separate nutrient film technique (NFT) hydroponic systems containing dwarf wheat (Triticum aestivum cv. USU Apogee) in a series of 21 day trials. Surfactant was added either in a (1). temporally dynamic mode (1-3 g surfactant m(-2) growing area d(-1)) as effected by automatic addition of a 300 ppm surfactant solution to meet plant water demand, or (2). continuous mode (2 g surfactant m(-2) growing area d(-1)) as effected by slow addition (10 mLh(-1)) of a 2000 ppm surfactant solution beginning at 4d after planting. SLES showed rapid primary degradation in both experiments, with no accumulation 24 h after initial addition. CAPB and AE were degraded less rapidly, with 30-50% remaining 24 h after initial addition, but CAPB and AE levels were below detection limit for the remainder of the study. No reductions in vegetative growth of wheat were observed in response to SLES, but biomass was reduced 20-25% with CAPB and AE. Microbial communities associated with both the plant roots and wetted hardware surfaces actively degraded the surfactants, as determined by monitoring surfactant levels following pulse additions at day 20 (with plants) and day 21 (after plant removal). In order to test whether the biofilm communities could ameliorate phytotoxicity by providing a microbial community acclimated for CAPB and AE decay, the continuous exposure systems were planted with wheat seeds after crop removal at day 21. Acclimation resulted in faster primary degradation (>90% within 24h) and reduced phytotoxicity. Overall, the studies indicate that relatively small areas (3-5m(2)) of hydroponic plant systems can process per capita production of mixed surfactants (5-10 g x person(-1)d(-1)) with minimal effects on plant growth.

  6. Response of graywater recycling systems based on hydroponic plant growth to three classes of surfactants

    NASA Technical Reports Server (NTRS)

    Garland, J. L.; Levine, L. H.; Yorio, N. C.; Hummerick, M. E.

    2004-01-01

    Anionic (sodium laureth sulfate, SLES), amphoteric (cocamidopropyl betaine, CAPB) and nonionic (alcohol polyethoxylate, AE) surfactants were added to separate nutrient film technique (NFT) hydroponic systems containing dwarf wheat (Triticum aestivum cv. USU Apogee) in a series of 21 day trials. Surfactant was added either in a (1). temporally dynamic mode (1-3 g surfactant m(-2) growing area d(-1)) as effected by automatic addition of a 300 ppm surfactant solution to meet plant water demand, or (2). continuous mode (2 g surfactant m(-2) growing area d(-1)) as effected by slow addition (10 mLh(-1)) of a 2000 ppm surfactant solution beginning at 4d after planting. SLES showed rapid primary degradation in both experiments, with no accumulation 24 h after initial addition. CAPB and AE were degraded less rapidly, with 30-50% remaining 24 h after initial addition, but CAPB and AE levels were below detection limit for the remainder of the study. No reductions in vegetative growth of wheat were observed in response to SLES, but biomass was reduced 20-25% with CAPB and AE. Microbial communities associated with both the plant roots and wetted hardware surfaces actively degraded the surfactants, as determined by monitoring surfactant levels following pulse additions at day 20 (with plants) and day 21 (after plant removal). In order to test whether the biofilm communities could ameliorate phytotoxicity by providing a microbial community acclimated for CAPB and AE decay, the continuous exposure systems were planted with wheat seeds after crop removal at day 21. Acclimation resulted in faster primary degradation (>90% within 24h) and reduced phytotoxicity. Overall, the studies indicate that relatively small areas (3-5m(2)) of hydroponic plant systems can process per capita production of mixed surfactants (5-10 g x person(-1)d(-1)) with minimal effects on plant growth.

  7. Stress Corrosion Evaluation of Various Metallic Materials for the International Space Station Water Recycling System

    NASA Technical Reports Server (NTRS)

    Torres, P. D.

    2015-01-01

    A stress corrosion evaluation was performed on Inconel 625, Hastelloy C276, titanium commercially pure (TiCP), Ti-6Al-4V, Ti-6Al-4V extra low interstitial, and Cronidur 30 steel as a consequence of a change in formulation of the pretreatment for processing the urine in the International Space Station Environmental Control and Life Support System Urine Processing Assembly from a sulfuric acid-based to a phosphoric acid-based solution. The first five listed were found resistant to stress corrosion in the pretreatment and brine. However, some of the Cronidur 30 specimens experienced reduction in load-carrying ability.

  8. Optimization of metalworking fluid microemulsion surfactant concentrations for microfiltration recycling.

    PubMed

    Zhao, Fu; Clarens, Andres; Skerlos, Steven J

    2007-02-01

    Microfiltration can be used as a recycling technology to increase metalworking fluid (MWF) life span, decrease procurement and disposal costs, and reduce occupational health risks and environmental impacts. The cost-effectiveness of the process can be increased by minimizing fouling interactions between MWFs and membranes. This paper reports on the development of a microfiltration model that establishes governing relationships between MWF surfactant system characteristics and microfiltration recycling performance. The model, which is based on surfactant adsorption/desorption kinetics, queueing theory, and coalescence kinetics of emulsion droplets, is verified experimentally. An analysis of the model and supporting experimental evidence indicates that the selection of surfactant systems minimally adsorb to membranes and lead to a high activation energy of coalescence results in a higher MWF flux through microfiltration membranes. The model also yields mathematical equations that express the optimal concentrations of anionic and nonionic surfactants with which microfiltration flux is maximized for a given combination of oil type, oil concentration, and surfactant types. Optimal MWF formulations are demonstrated for a petroleum oil MWF using a disulfonate/ ethoxylated alcohol surfactant package and for several vegetable oil MWFs using a disulfonate/ethoxylated glyceryl ester surfactant package. The optimization leads to flux increases ranging from 300 to 800% without impact on manufacturing performance. It is further shown that MWF reformulation efforts directed toward increasing microfiltration flux can have the beneficial effect of increasing MWF robustness to deterioration and flux decline in the presence of elevated concentrations of hardwater ions.

  9. Recycled Art: Create Puppets Using Recycled Objects.

    ERIC Educational Resources Information Center

    Clearing, 2003

    2003-01-01

    Presents an activity from "Healthy Foods from Healthy Soils" for making puppets using recycled food packaging materials. Includes background information, materials, instructions, literature links, resources, and benchmarks. (NB)

  10. Phosphorus depletion in forest soils shapes bacterial communities towards phosphorus recycling systems.

    PubMed

    Bergkemper, Fabian; Schöler, Anne; Engel, Marion; Lang, Friederike; Krüger, Jaane; Schloter, Michael; Schulz, Stefanie

    2016-06-01

    Phosphorus (P) is an important macronutrient for all biota on earth but similarly a finite resource. Microorganisms play on both sides of the fence as they effectively mineralize organic and solubilize precipitated forms of soil phosphorus but conversely also take up and immobilize P. Therefore, we analysed the role of microbes in two beech forest soils with high and low P content by direct sequencing of metagenomic deoxyribonucleic acid. For inorganic P solubilization, a significantly higher microbial potential was detected in the P-rich soil. This trait especially referred to Candidatus Solibacter usiatus, likewise one of the dominating species in the data sets. A higher microbial potential for efficient phosphate uptake systems (pstSCAB) was detected in the P-depleted soil. Genes involved in P starvation response regulation (phoB, phoR) were prevalent in both soils. This underlines the importance of effective phosphate (Pho) regulon control for microorganisms to use alternative P sources during phosphate limitation. Predicted genes were primarily harboured by Rhizobiales, Actinomycetales and Acidobacteriales. PMID:26690731

  11. A critical evaluation of combined engineered and aquifer treatment systems in water recycling.

    PubMed

    Dillon, P; Page, D; Vanderzalm, J; Pavelic, P; Toze, S; Bekele, E; Sidhu, J; Prommer, H; Higginson, S; Regel, R; Rinck-Pfeiffer, S; Purdie, M; Pitman, C; Wintgens, T

    2008-01-01

    Australian experience at five research sites where stormwater and reclaimed water have been stored in aquifers prior to reuse, have yielded valuable information about water treatment processes in anaerobic and aerobic aquifers. One of these sites is the stormwater to potable water ASTR project at the City of Salisbury, a demonstration project within the broader EC project 'RECLAIM WATER'. A framework for characterising the effectiveness of such treatment for selected organic chemicals, natural organic matter, and pathogens is being developed for inclusion in new Australian Guidelines for Management of Aquifer Recharge. The combination of pre-treatments (including passive systems such as reed beds) and aquifer treatment effectiveness in relation to source waters and intended uses of recovered water will be described. Advantages and disadvantages of various types of pre-treatments in relation to effectiveness and sustainability of managed aquifer recharge will be discussed taking account of aquifer characteristics. These observations will be consolidated into a draft set of principles to assist in selection of engineered treatments compatible with passive treatment in aquifers.

  12. Molecular Adsorbent Recirculating System (MARS(®)) removal of piperacillin/tazobactam in a patient with acetaminophen-induced acute liver failure.

    PubMed

    Ruggero, M A; Argento, A C; Heavner, M S; Topal, J E

    2013-04-01

    The objective of this study was to illustrate the pharmacokinetic removal of piperacillin/tazobactam in an anuric patient on Molecular Adsorbent Recirculating System (MARS(®)). The patient was a 32-year-old woman who presented to a medical intensive care unit with acute liver failure secondary to an acetaminophen overdose. While awaiting transplant, she was started on MARS therapy as a bridge to liver transplant and empirically started on piperacillin/tazobactam therapy. MARS is an extracorporeal hemofiltration device, which incorporates a continuous venovenous hemofiltration (CVVHD) machine linked to an albumin-enriched dialysate filter to normalize excess electrolytes, metabolic waste, and protein-bound toxins. In addition to protein-bound waste, MARS removes water-soluble, low molecular-weight molecules. The patient received piperacillin/tazobactam 4.5 g infused intravenously over 3 h. A steep decline in serum levels occurred between hours 4 and 6 while MARS continued and no antibiotic was infused. The elimination rate constant (k(e)) for the removal of piperacillin in this patent was 0.453 h(-1) and the half-life (λ) was 1.53 h. The k(e) was 2.9-fold higher than with CVVHD alone and the λ was 3.7-fold shorter. Low levels of piperacillin are achieved during MARS therapy, but in the treatment of more resistant organisms, such as Pseudomonas aeruginosa, these low levels may not be adequate to achieve bactericidal activity. Drug levels following a standard infusion of 30 min would likely be even lower. Formalized pharmacokinetic studies of piperacillin/tazobactam removal in patients on MARS therapy are necessary to make clear dosing recommendations.

  13. Pathways and mechanisms of endocytic recycling

    PubMed Central

    Grant, Barth D.; Donaldson, Julie G.

    2011-01-01

    Endocytic recycling is coordinated with endocytic uptake to control the composition of the plasma membrane. Although much of our understanding of endocytic recycling has come from studies on the transferrin receptor, a protein internalized through clathrin-dependent endocytosis, increased interest in clathrin-independent endocytosis has led to the discovery of new endocytic recycling systems. Recent insights into the regulatory mechanisms that control endocytic recycling have focused on recycling through tubular carriers and the return to the cell surface of cargo that enters cells through clathrin-independent mechanisms. Recent work emphasizes the importance of regulated recycling in such diverse processes as cytokinesis, cell adhesion and morphogenesis, cell fusion, and learning and memory. PMID:19696797

  14. Effect of nitrate recycling ratio on simultaneous biological nutrient removal in a novel anaerobic/anoxic/oxic (A2/O)-biological aerated filter (BAF) system.

    PubMed

    Chen, Yongzhi; Peng, Chengyao; Wang, Jianhua; Ye, Liu; Zhang, Liangchang; Peng, Yongzhen

    2011-05-01

    A novel system integrating anaerobic/anoxic/oxic (A(2)/O) and biological aerated filter (BAF), which could solve the sludge retention time (SRT) conflicting problem between nitrifiers and polyphosphate accumulating organisms (PAOs) by shortening SRT for PAOs in A(2)/O and lengthening SRT for nitrifiers in BAF, was investigated in this study. Various nitrate recycling ratios (100%, 200%, 300% and 400%) were applied to a lab-scaled A(2)/O-BAF system to detect the simultaneous biological nitrogen and phosphorus removal performance while treating real domestic wastewater with low carbon to nitrogen (C/N) ratio. The concentrations of chemical oxygen demand (COD), NH(4)(+)-N and total phosphorus (TP) in the effluent were less than 50.0, 0.5 and 0.5mg/L, respectively, throughout the experiments. The removal efficiencies of total nitrogen (TN) were 64.9%, 77.0%, 82.0% and 87.0%, under respective nitrate recycling ratios (increasing from 100% to 400%). By contrast, nitrate recycling ratios had neglectable effect on the removal efficiencies of COD and NH(4)(+)-N.

  15. Simple and efficient recycling of fungal selectable marker genes with the Cre-loxP recombination system via anastomosis

    PubMed Central

    Zhang, Dong-Xiu; Lu, Hsiao-Ling; Liao, Xinggang; St. Leger, Raymond J.; Nuss, Donald L.

    2013-01-01

    Reverse-genetics analysis has played a significant role in advancing fungal biology, but is limited by the number of available selectable marker genes (SMGs). The Cre-loxP recombination system has been adapted for use in filamentous fungi to overcome this limitation. Expression of the Cre recombinase results in excision of an integrated SMG that is flanked by loxP sites, allowing a subsequent round of transformation with the same SMG. However, current protocols for regulated expression or presentation of Cre require multiple time-consuming steps. During efforts to disrupt four different RNA-dependent RNA polymerase genes in a single strain of the chestnut blight fungus Cryphonectria parasitica, we tested whether Cre could successfully excise loxP-flanked SMGs when provided in trans via anastomosis. Stable Cre-producing donor strains were constructed by transformation of wild-type C. parasitica strain EP155 with the Cre-coding domain under the control of a constitutive promoter. Excision of multiple loxP-flanked SMGs was efficiently achieved by simply pairing the Cre-donor strain and the loxP-flanked SMGs-transformed recipient strain and recovering mycelia from the margin of the recipient colony near the anastomosis zone. This method was shown to be as efficient as and much less time consuming than excision by transformation-mediated expression of Cre. It also allows unlimited recycling of loxP-flanked SMGs and the generation of disruption mutant strains that are free of any foreign gene. The successful application of this method to Metarhizium robertsii suggests potential use for optimizing reverse-genetics analysis in a broad range of filamentous fungi. PMID:24007936

  16. Continuum elastic theory of adsorbate vibrational relaxation

    NASA Astrophysics Data System (ADS)

    Lewis, Steven P.; Pykhtin, M. V.; Mele, E. J.; Rappe, Andrew M.

    1998-01-01

    An analytical theory is presented for the damping of low-frequency adsorbate vibrations via resonant coupling to the substrate phonons. The system is treated classically, with the substrate modeled as a semi-infinite elastic continuum and the adsorbate overlayer modeled as an array of point masses connected to the surface by harmonic springs. The theory provides a simple expression for the relaxation rate in terms of fundamental parameters of the system: γ=mω¯02/AcρcT, where m is the adsorbate mass, ω¯0 is the measured frequency, Ac is the overlayer unit-cell area, and ρ and cT are the substrate mass density and transverse speed of sound, respectively. This expression is strongly coverage dependent, and predicts relaxation rates in excellent quantitative agreement with available experiments. For a half-monolayer of carbon monoxide on the copper (100) surface, the predicted damping rate of in-plane frustrated translations is 0.50×1012s-1, as compared to the experimental value of (0.43±0.07)×1012s-1. Furthermore it is shown that, for all coverages presently accessible to experiment, adsorbate motions exhibit collective effects which cannot be treated as stemming from isolated oscillators.

  17. High Pressure Scanning Tunneling Microscopy Studies of AdsorbateStructure and Mobility during Catalytic Reactions: Novel Design of anUltra High Pressure, High Temperature Scanning Tunneling MicroscopeSystem for Probing Catalytic Conversions

    SciTech Connect

    Tang, David Chi-Wai

    2005-05-16

    The aim of the work presented therein is to take advantage of scanning tunneling microscope’s (STM) capability for operation under a variety of environments under real time and at atomic resolution to monitor adsorbate structures and mobility under high pressures, as well as to design a new generation of STM systems that allow imaging in situ at both higher pressures (35 atm) and temperatures (350 °C).

  18. Recycling overview in Sweden

    SciTech Connect

    Not Available

    1989-07-01

    This article discusses the recycling programs currently in use in Sweden. Recycling of newspapers, batteries, plastics are all mentioned in this report by the Swedish Association of Public Cleansing and Solid Waste Management.

  19. Rethink, Rework, Recycle.

    ERIC Educational Resources Information Center

    Wrhen, Linda; DiSpezio, Michael A.

    1991-01-01

    Information about the recycling and reuse of plastics, aluminum, steel, glass, and newspapers is presented. The phases of recycling are described. An activity that allows students to separate recyclable materials is included. The objectives, a list of needed materials, and procedure are provided. (KR)

  20. Much Ado about Recycling.

    ERIC Educational Resources Information Center

    Elliot, Ian

    1993-01-01

    Discusses a solid waste recycling workshop for students and teachers sponsored by the Southwest Connecticut Regional Operating Committee (SWEROC), a consortium of 19 towns and cities organized to help implement a regional recycling program. The SWEROC workshop utilized games and team activities to teach students about recycling and the…

  1. Buying recycled helps market

    SciTech Connect

    Watts, G.

    1996-08-01

    The waste reduction and recycling program of Thousand Oaks, California is summarized. Descriptions of the program, market development for recycled products, business development, and economic development are provided. The emphasis of the program is on market development for recycled products. Procurement guidelines used by the city are reprinted in the paper.

  2. Development and Testing of Molecular Adsorber Coatings

    NASA Technical Reports Server (NTRS)

    Abraham, Nithin; Hasegawa, Mark; Straka, Sharon

    2012-01-01

    The effect of on-orbit molecular contamination has the potential to degrade the performance of spaceflight hardware and diminish the lifetime of the spacecraft. For example, sensitive surfaces, such as optical surfaces, electronics, detectors, and thermal control surfaces, are vulnerable to the damaging effects of contamination from outgassed materials. The current solution to protect these surfaces is through the use of zeolite coated ceramic adsorber pucks. However, these pucks and its additional complex mounting hardware requirements result in several disadvantages, such as size, weight, and cost related concerns, that impact the spacecraft design and the integration and test schedule. As a result, a new innovative molecular adsorber coating was developed as a sprayable alternative to mitigate the risk of on-orbit molecular contamination. In this study, the formulation for molecular adsorber coatings was optimized using various binders, pigment treatment methods, binder to pigment ratios, thicknesses, and spray application techniques. The formulations that passed coating adhesion and vacuum thermal cycling tests were further tested for its adsorptive capacity. Accelerated molecular capacitance tests were performed in an innovatively designed multi-unit system containing idealized contaminant sources. This novel system significantly increased the productivity of the testing phase for the various formulations that were developed. Work performed during the development and testing phases has demonstrated successful application of molecular adsorber coatings onto metallic substrates, as well as, very promising results for the adhesion performance and the molecular capacitance of the coating. Continued testing will assist in the qualification of molecular adsorber coatings for use on future contamination sensitive spaceflight missions.

  3. Computer simulations of adsorbed liquid crystal films

    NASA Astrophysics Data System (ADS)

    Wall, Greg D.; Cleaver, Douglas J.

    2003-01-01

    The structures adopted by adsorbed thin films of Gay-Berne particles in the presence of a coexisting vapour phase are investigated by molecular dynamics simulation. The films are adsorbed at a flat substrate which favours planar anchoring, whereas the nematic-vapour interface favours normal alignment. On cooling, a system with a high molecule-substrate interaction strength exhibits substrate-induced planar orientational ordering and considerable stratification is observed in the density profiles. In contrast, a system with weak molecule-substrate coupling adopts a director orientation orthogonal to the substrate plane, owing to the increased influence of the nematic-vapour interface. There are significant differences between the structures adopted at the two interfaces, in contrast with the predictions of density functional treatments of such systems.

  4. Process to recycle shredder residue

    DOEpatents

    Jody, Bassam J.; Daniels, Edward J.; Bonsignore, Patrick V.

    2001-01-01

    A system and process for recycling shredder residue, in which separating any polyurethane foam materials are first separated. Then separate a fines fraction of less than about 1/4 inch leaving a plastics-rich fraction. Thereafter, the plastics rich fraction is sequentially contacted with a series of solvents beginning with one or more of hexane or an alcohol to remove automotive fluids; acetone to remove ABS; one or more of EDC, THF or a ketone having a boiling point of not greater than about 125.degree. C. to remove PVC; and one or more of xylene or toluene to remove polypropylene and polyethylene. The solvents are recovered and recycled.

  5. An analytical framework and tool ('InteRa') for integrating the informal recycling sector in waste and resource management systems in developing countries.

    PubMed

    Velis, Costas A; Wilson, David C; Rocca, Ondina; Smith, Stephen R; Mavropoulos, Antonis; Cheeseman, Chris R

    2012-09-01

    In low- and middle-income developing countries, the informal (collection and) recycling sector (here abbreviated IRS) is an important, but often unrecognised, part of a city's solid waste and resources management system. Recent evidence shows recycling rates of 20-30% achieved by IRS systems, reducing collection and disposal costs. They play a vital role in the value chain by reprocessing waste into secondary raw materials, providing a livelihood to around 0.5% of urban populations. However, persisting factual and perceived problems are associated with IRS (waste-picking): occupational and public health and safety (H&S), child labour, uncontrolled pollution, untaxed activities, crime and political collusion. Increasingly, incorporating IRS as a legitimate stakeholder and functional part of solid waste management (SWM) is attempted, further building recycling rates in an affordable way while also addressing the negatives. Based on a literature review and a practitioner's workshop, here we develop a systematic framework--or typology--for classifying and analysing possible interventions to promote the integration of IRS in a city's SWM system. Three primary interfaces are identified: between the IRS and the SWM system, the materials and value chain, and society as a whole; underlain by a fourth, which is focused on organisation and empowerment. To maximise the potential for success, IRS integration/inclusion/formalisation initiatives should consider all four categories in a balanced way and pay increased attention to their interdependencies, which are central to success, including specific actions, such as the IRS having access to source separated waste. A novel rapid evaluation and visualisation tool is presented--integration radar (diagram) or InterRa--aimed at illustrating the degree to which a planned or existing intervention considers each of the four categories. The tool is further demonstrated by application to 10 cases around the world, including a step

  6. Solar assisted sludge and energy recycling disposal system utilizing the old Princeton sewage treatment and solid waste incineration facilities

    SciTech Connect

    Slaby, S.M.

    1980-12-01

    Princeton, New Jersey, a town of 30,000 people is in a unique position to utilize solid waste and sewage sludge as supplementary energy sources. The Stony Brook Sewage Authority recently constructed a new twenty million dollar sewage treatment plant next to the old sewage treatment plant which served the community of Princeton for forty years. On the site of the old plant is an abandoned incinerator plant which presently is being used as a transfer station. The new sewage treatment plant is disposing of its sludge by burning it in multiple hearth furnaces using sixty gallons of precious oil to do this. The proposed Princeton Energy Recycling Center is designed to be retrofitted with solar sludge dryers to dry the sewage sludge which would be transported by conveyer to the old incinerator plant where it would be mixed with garbage and be burned in rehabilitated furnaces which would be retrofitted for steam generators, a steam engine driven electric generator and air pollution control equipment. It is estimated that the proposed energy recycling center would fulfill all electrical needs of the new sewage treatment plant in addition to solving the solid waste and sludge disposal problems of the Princeton community. The paper presents a detailed discussion on the proposed Princeton Energy Recycling Center.

  7. Recycled Water Poses Disinfectant Problem

    ERIC Educational Resources Information Center

    Chemical and Engineering News, 1973

    1973-01-01

    Discusses the possible health hazards resulting from released nucleic acid of inactivated viruses, chlorinated nonliving organic molecules, and overestimated reliability of waste treatment standards. Suggests the recycle system use a dual disinfectant such as chlorine and ozone in water treatment. (CC)

  8. CO2 Sequestration and Recycle by Photosynthesis

    SciTech Connect

    Steven S.C. Chuang

    2004-02-01

    Visible light-photocatalysis could provide a cost-effective route to recycle CO2 to useful chemicals or fuels. Research is planned to study the reactivity of adsorbates, their role in the photosynthesis reaction, and their relation to the nature of surface sites during photosynthesis of methanol and hydrocarbons from CO{sub 2}/H{sub 2}O. The year two research focus catalyst screening and IR studies. Key research results show Pd/TiO2 exhibits the highest activity for hydrocarbon synthesis from photocatalytic reactions. The in situ IR could successfully monitor the adsorbate hydrocarbon species on Cu/TiO2. Year III research will focus on developing a better understanding of the key factors which control the catalyst activity.

  9. The entropies of adsorbed molecules.

    PubMed

    Campbell, Charles T; Sellers, Jason R V

    2012-10-31

    Adsorbed molecules are involved in many reactions on solid surface that are of great technological importance. As such, there has been tremendous effort worldwide to learn how to predict reaction rates and equilibrium constants for reactions involving adsorbed molecules. Theoretical calculation of both the rate and equilibrium constants for such reactions requires knowing the entropy and enthalpy of the adsorbed molecule. While much effort has been devoted to measuring and calculating the enthalpies of well-defined adsorbates, few measurements of the entropies of adsorbates have been reported. We present here a new way to determine the standard entropies of adsorbed molecules (S(ad)(0)) on single crystal surfaces from temperature programmed desorption data, prove its accuracy by comparison to entropies measured by equilibrium methods, and apply it to published data to extract new entropies. Most importantly, when combined with reported entropies, we find that at high coverage, they linearly track the entropy of the gas-phase molecule at the same temperature (T), such that S(ad)(0)(T) = 0.70 S(gas)(0)(T) - 3.3R (R = the gas constant), with a standard deviation of only 2R over a range of 50R. These entropies, which are ~2/3 of the gas, are huge compared to most theoretical predictions. This result can be extended to reliably predict prefactors in the Arrhenius rate constant for surface reactions involving such species, as proven here for desorption. PMID:23033909

  10. pH recycling aqueous two-phase systems applied in extraction of Maitake β-Glucan and mechanism analysis using low-field nuclear magnetic resonance.

    PubMed

    Hou, Huiyun; Cao, Xuejun

    2015-07-31

    In this paper, a recycling aqueous two-phase systems (ATPS) based on two pH-response copolymers PADB and PMDM were used in purification of β-Glucan from Grifola frondosa. The main parameters, such as polymer concentration, type and concentration of salt, extraction temperature and pH, were investigated to optimize partition conditions. The results demonstrated that β-Glucan was extracted into PADB-rich phase, while impurities were extracted into PMDM-rich phase. In this 2.5% PADB/2.5% PMDM ATPS, 7.489 partition coefficient and 96.92% extraction recovery for β-Glucan were obtained in the presence of 30mmol/L KBr, at pH 8.20, 30°C. The phase-forming copolymers could be recycled by adjusting pH, with recoveries of over 96.0%. Furthermore, the partition mechanism of Maitake β-Glucan in PADB/PMDM aqueous two-phase systems was studied. Fourier transform infrared spectra, ForteBio Octet system and low-field nuclear magnetic resonance (LF-NMR) were introduced for elucidating the partition mechanism of β-Glucan. Especially, LF-NMR was firstly used in the mechanism analysis in partition of aqueous two-phase systems. The change of transverse relaxation time (T2) in ATPS could reflect the interaction between polymers and β-Glucan.

  11. Efficiency gain of solid oxide fuel cell systems by using anode offgas recycle - Results for a small scale propane driven unit

    NASA Astrophysics Data System (ADS)

    Dietrich, Ralph-Uwe; Oelze, Jana; Lindermeir, Andreas; Spitta, Christian; Steffen, Michael; Küster, Torben; Chen, Shaofei; Schlitzberger, Christian; Leithner, Reinhard

    The transfer of high electrical efficiencies of solid oxide fuel cells (SOFC) into praxis requires appropriate system concepts. One option is the anode-offgas recycling (AOGR) approach, which is based on the integration of waste heat using the principle of a chemical heat pump. The AOGR concept allows a combined steam- and dry-reforming of hydrocarbon fuel using the fuel cell products steam and carbon dioxide. SOFC fuel gas of higher quantity and quality results. In combination with internal reuse of waste heat the system efficiency increases compared to the usual path of partial oxidation (POX). The demonstration of the AOGR concept with a 300 Wel-SOFC stack running on propane required: a combined reformer/burner-reactor operating in POX (start-up) and AOGR modus; a hotgas-injector for anode-offgas recycling to the reformer; a dynamic process model; a multi-variable process controller; full system operation for experimental proof of the efficiency gain. Experimental results proof an efficiency gain of 18 percentage points (η·POX = 23%, η·AOGR = 41%) under idealized lab conditions. Nevertheless, further improvements of injector performance, stack fuel utilization and additional reduction of reformer reformer O/C ratio and system pressure drop are required to bring this approach into self-sustaining operation.

  12. CO2 Sequestration and Recycle by Photosynthesis

    SciTech Connect

    Steven S.C. Chuang

    2003-02-01

    Visible light-photocatalysis could provide a cost-effective route to recycle CO{sub 2} to useful chemicals or fuels. Research is planned to study the reactivity of adsorbates, their role in the photosynthesis reaction, and their relation to the nature of surface sites during photosynthesis of methanol and hydrocarbons from CO{sub 2}/H{sub 2}O over four types of MCM-41/Al{sub 2}O{sub 3}-supported TiO{sub 2} and CdS catalysts: (1) ion-exchanged metal cations, (2) highly dispersed cations, (3) monolayer sites, and (4) modified monolayer catalysts. TiO{sub 2} was selected since it has exhibited higher activity than other oxide catalysts; CdS was selected for its photocatalytic activity in the visible light region. Al{sub 2}O{sub 3} provides excellent hydrothermal stability. MCM-41 offers high surface area (more than 800 m{sup 2}/g), providing a platform for preparing and depositing a large number of active sites per gram catalyst. The unique structure of these ion exchange cations, highly dispersed cations, and monolayer sites provides an opportunity to tailor their chemical/coordination environments for enhancing visible-light photocatalytic activity and deactivation resistance. The year one research tasks include (1) setting up experimental system, (2) preparing ion-exchanged metal cations, highly dispersed cations, monolayer sites of TiO{sub 2} and CdS, and (3) determination of the dependence of methanol activity/selectivity on the catalyst preparation techniques and their relation to adsorbate reactivity. During the first quarter, we have purchased a Gas Chromatography and all the necessary components for building 3 reactor systems, set up the light source apparatus, and calibrated the light intensity. In addition, monolayer TiO{sub 2}/MCM-41 and TiO{sub 2}/Al{sub 2}O{sub 3} catalyst were prepared. TiO{sub 2}/Al{sub 2}O{sub 3} was found to exhibit high activity for methanol synthesis. Repeated runs was planned to insure the reproducibility of the data.

  13. Hollow-fiber-based adsorbers for gas separation by pressure-swing adsorption

    SciTech Connect

    Feng, X.; Pan, C.Y.; McMinis, C.W.; Ivory, J.; Ghosh, D.

    1998-07-01

    Hollow-fiber-based adsorbers for gas separation by pressure-swing adsorption (PSA) was studied experimentally. The high efficiency of hollow-fiber-based adsorbers for gas separation was illustrated by hydrogen separation using fine-powder-activated carbon and molecular sieve as adsorbents. The adsorption equilibrium and dynamics of the hollow-fiber adsorbers were determined. The pressure drop of the gas flowing through the adsorbers was also examined. The adsorbers were tested for hydrogen separation from nitrogen, carbon dioxide, and a multicomponent gas mixture simulating ammonia synthesis purge gas. The PSA systems using the hollow-fiber adsorbers were very effective for hydrogen purification. The high separation efficiency is derived from the fast mass-transfer rate and low pressure drop, two key features of hollow-fiber-based adsorbers.

  14. Recycling in Puerto Rico

    SciTech Connect

    McAdams, C.L.

    1996-05-01

    The commonwealth of Puerto Rico has never had a traditional, centrally organized solid waste management system. In the past, municipalities provided service for their own residents and the island used 62 unlined landfills. In April 1994, 32 of those landfills closed. A study released in 1995 found that residents of Puerto Rico generate 8,100 tons of waste each day, at a per capita rate of 4.9 pounds per day. A solid waste management strategy unveiled with much fanfare early last year included plans to build an integrated system of collection, transfer stations, and disposal sites. These sites would be market-driven by recycling and hinged on partnerships between the public and private sectors and public education. A key to Puerto Rico`s plan was investment by the private sector.

  15. A hybrid froth flotation-filtration system as a pretreatment for oil sands tailings pond recycle water management: Bench- and pilot-scale studies.

    PubMed

    Loganathan, Kavithaa; Bromley, David; Chelme-Ayala, Pamela; Gamal El-Din, Mohamed

    2015-09-15

    Through sustainable water management, oil sands companies are working to reduce their reliance on fresh water by minimizing the amount of water required for their operations and by recycling water from tailings ponds. This study was the first pilot-scale testing of a hybrid technology consisting of froth flotation combined with filtration through precoated submerged stainless steel membranes used to treat recycle water from an oil sands facility. The results indicated that the most important factor affecting the performance of the hybrid system was the influent water quality. Any rise in the levels of suspended solids or total organic carbon of the feed water resulted in changes of chemical consumption rates, flux rates, and operating cycle durations. The selections of chemical type and dosing rates were critical in achieving optimal performance. In particular, the froth application rate heavily affected the overall recovery of the hybrid system as well as the performance of the flotation process. Optimum surfactant usage to generate froth (per liter of treated water) was 0.25 mL/L at approximately 2000 NTU of influent turbidity and 0.015 mL/L at approximately 200 NTU of influent turbidity. At the tested conditions, the optimal coagulant dose was 80 mg/L (as Al) at approximately 2000 NTU of influent turbidity and <40 mg/L (as Al) at approximately 200 NTU of influent turbidity. Precoat loading per unit membrane surface area tested during the pilot study was approximately 30 g/m(2). The results of this study indicated that this hybrid technology can potentially be considered as a pre-treatment step for reverse osmosis treatment of recycle water. PMID:26164269

  16. A hybrid froth flotation-filtration system as a pretreatment for oil sands tailings pond recycle water management: Bench- and pilot-scale studies.

    PubMed

    Loganathan, Kavithaa; Bromley, David; Chelme-Ayala, Pamela; Gamal El-Din, Mohamed

    2015-09-15

    Through sustainable water management, oil sands companies are working to reduce their reliance on fresh water by minimizing the amount of water required for their operations and by recycling water from tailings ponds. This study was the first pilot-scale testing of a hybrid technology consisting of froth flotation combined with filtration through precoated submerged stainless steel membranes used to treat recycle water from an oil sands facility. The results indicated that the most important factor affecting the performance of the hybrid system was the influent water quality. Any rise in the levels of suspended solids or total organic carbon of the feed water resulted in changes of chemical consumption rates, flux rates, and operating cycle durations. The selections of chemical type and dosing rates were critical in achieving optimal performance. In particular, the froth application rate heavily affected the overall recovery of the hybrid system as well as the performance of the flotation process. Optimum surfactant usage to generate froth (per liter of treated water) was 0.25 mL/L at approximately 2000 NTU of influent turbidity and 0.015 mL/L at approximately 200 NTU of influent turbidity. At the tested conditions, the optimal coagulant dose was 80 mg/L (as Al) at approximately 2000 NTU of influent turbidity and <40 mg/L (as Al) at approximately 200 NTU of influent turbidity. Precoat loading per unit membrane surface area tested during the pilot study was approximately 30 g/m(2). The results of this study indicated that this hybrid technology can potentially be considered as a pre-treatment step for reverse osmosis treatment of recycle water.

  17. Antiproton cooling in the Fermilab Recycler Ring

    SciTech Connect

    Nagaitsev, S.; Bolshakov, A.; Broemmelsiek, D.; Burov, Alexey V.; Carlson, K.; Gattuso, C.; Hu, M.; Kazakevich, G.; Kramper, B.; Kroc, T.; Leibfritz, J.; Prost, L.; Pruss, S.; Saewert, G; Schmidt, C.W.; Seletskiy, S.; Shemyakin, A.; Sutherland, M.; Tupikov, V.; Warner, A.; Zenkevich, P.; /Fermilab /Moscow, ITEP /Novosibirsk, IYF /Rochester U.

    2005-12-01

    The 8.9-GeV/c Recycler antiproton storage ring is equipped with both stochastic and electron cooling systems. These cooling systems are designed to assist accumulation of antiprotons for the Tevatron collider operations. In this paper we report on an experimental demonstration of electron cooling of high-energy antiprotons. At the time of writing this report, the Recycler electron cooling system is routinely used in collider operations. It has helped to set recent peak luminosity records.

  18. Design of an integrated piggery system with recycled water, biomass production and water purification by vermiculture, macrophyte ponds and constructed wetlands.

    PubMed

    Morand, Philippe; Robin, Paul; Pourcher, Anne-Marie; Oudart, Didier; Fievet, Sebastien; Luth, Daniel; Cluzeau, Daniel; Picot, Bernadette; Landrain, Brigitte

    2011-01-01

    Since 2001 the swine experimental station of Guernévez has studied biological treatment plants for nutrient recovery and water recycling, suited to the fresh liquid manure coming out of flushing systems. An integrated system with continuous recycling was set up in 2007, associated with a piggery of 30 pregnant sows. It includes a screen, a vermifilter, and macrophyte ponds alternating with constructed wetlands. The screen and the vermifilter had a lower removal efficiency than in previous studies on finishing pigs. A settling tank was then added between the vermifilter and the first lagoon to collect the worm casts. A second vermifilter was added to recover this particulate organic matter. A storage lagoon was added to compensate for evaporative losses and complete pollution abatement, with goldfish as a bioindicator of water quality. The removal efficiency of the whole system was over 90% for COD and nitrogen, over 70% for phosphorus and potassium, and more than 4 logarithmic units for pathogens (E. coli, enterococci, C perfringens). Plant production was about 20 T DM ha(-1) y(-1). Floating macrophytes (Azolla caroliniana, Eichhornia crassipes, Hydrocotyle vulgaris) were more concentrated in nutrients than helophytes (Phragmites australis, Glyceria aquatica,…). Azolla caroliniana was successfully added to feed finishing pigs.

  19. Design of an integrated piggery system with recycled water, biomass production and water purification by vermiculture, macrophyte ponds and constructed wetlands.

    PubMed

    Morand, Philippe; Robin, Paul; Pourcher, Anne-Marie; Oudart, Didier; Fievet, Sebastien; Luth, Daniel; Cluzeau, Daniel; Picot, Bernadette; Landrain, Brigitte

    2011-01-01

    Since 2001 the swine experimental station of Guernévez has studied biological treatment plants for nutrient recovery and water recycling, suited to the fresh liquid manure coming out of flushing systems. An integrated system with continuous recycling was set up in 2007, associated with a piggery of 30 pregnant sows. It includes a screen, a vermifilter, and macrophyte ponds alternating with constructed wetlands. The screen and the vermifilter had a lower removal efficiency than in previous studies on finishing pigs. A settling tank was then added between the vermifilter and the first lagoon to collect the worm casts. A second vermifilter was added to recover this particulate organic matter. A storage lagoon was added to compensate for evaporative losses and complete pollution abatement, with goldfish as a bioindicator of water quality. The removal efficiency of the whole system was over 90% for COD and nitrogen, over 70% for phosphorus and potassium, and more than 4 logarithmic units for pathogens (E. coli, enterococci, C perfringens). Plant production was about 20 T DM ha(-1) y(-1). Floating macrophytes (Azolla caroliniana, Eichhornia crassipes, Hydrocotyle vulgaris) were more concentrated in nutrients than helophytes (Phragmites australis, Glyceria aquatica,…). Azolla caroliniana was successfully added to feed finishing pigs. PMID:21436573

  20. Aluminum recycling in the United States in 2000

    USGS Publications Warehouse

    Plunkert, Patricia A.

    2006-01-01

    As one of a series of reports on metals recycling, this report discusses the flow of aluminum from production through its uses with particular emphasis on the recycling of industrial scrap (new scrap) and used products (old scrap) in 2000. This materials flow study includes a description of aluminum supply and demand factors for the United States to illustrate the extent of aluminum recycling and to identify recycling trends. Understanding the system of materials flow from source to ultimate disposition can assist in improving the management of natural resources in a manner that is compatible with sound environmental practices. In 2000, the old scrap recycling efficiency for aluminum was estimated to be 42 percent. Almost 60 percent of the aluminum that was recycled in 2000 came from new scrap, and the recycling rate was estimated to be 36 percent. The principal source of old scrap was recycled aluminum beverage cans.

  1. Solid waste recycling programs at Rocky Flats

    SciTech Connect

    Millette, R.L.; Blackman, T.E.; Shepard, M.D.

    1994-12-31

    The Rocky Flats (RFP) recycling programs for solid waste materials have been in place for over ten years. Within the last three years, the programs were centralized under the direction of the Rocky Flats Waste Minimization department, with the assistance of various plant organizations (e.g., Trucking, Building Services, Regulated Waste Operations, property Utilization and Disposal and Security). Waste Minimization designs collection and transportation systems for recyclable materials and evaluates recycling markets for opportunities to add new commodities to the existing programs. The Waste Minimization department also promotes employee participation in the Rocky Flats Recycling Programs, and collects all recycling data for publication. A description of the program status as of January 1994 is given.

  2. Signal-Switchable Electrochemiluminescence System Coupled with Target Recycling Amplification Strategy for Sensitive Mercury Ion and Mucin 1 Assay.

    PubMed

    Jiang, Xinya; Wang, Huijun; Wang, Haijun; Yuan, Ruo; Chai, Yaqin

    2016-09-20

    In the present work, we first found that mercury ion (Hg(2+)) has an efficient quenching effect on the electrochemiluminescence (ECL) of N-(aminobutyl)-N-(ethylisoluminol) (ABEI). Since we were inspired by this discovery, an aptamer-based ECL sensor was fabricated based on a Hg(2+) triggered signal switch coupled with an exonuclease I (Exo I)-stimulated target recycling amplification strategy for ultrasensitive determination of Hg(2+) and mucin 1 (MUC1). Concretely, the ECL intensity of ABEI-functionalized silver nanoparticles decorated graphene oxide nanocomposite (GO-AgNPs-ABEI) was initially enhanced by ferrocene labeled ssDNA (Fc-S1) (first signal switch "on" state) in the existence of H2O2. With the aid of aptamer, assistant ssDNA (S2) and full thymine (T) bases ssDNA (S3) modified Au nanoparticles (AuNPs-S2-S3) were immobilized on the sensing surface through the hybridization reaction. Then, via the strong and stable T-Hg(2+)-T interaction, an abundance of Hg(2+) was successfully captured on the AuNPs-S2-S3 and effectively inhibited the ECL reaction of ABEI (signal switch "off" state). Finally, the signal switch "on" state was executed by utilizing MUC1 as an aptamer-specific target to bind aptamer, leading to the large decrease of the captured Hg(2+). To further improve the sensitivity of the aptasensor, Exo I was implemented to digest the binded aptamer, which resulted in the release of MUC1 for achieving target recycling with strong detectable ECL signal even in a low level of MUC1. By integrating the quenching effect of Hg(2+) to reduce the background signal and target recycling for signal amplification, this proposed ECL aptasensor was successfully used to detect Hg(2+) and MUC1 sensitively with a wide linear response. PMID:27529728

  3. Workshop 7 (synthesis): towards a recycling society: systems approach to small-scale reuse of human waste.

    PubMed

    Rahman, A; Drangert, J O

    2001-01-01

    Population increase and growing quantities of human excreta create serious problems and high risks for people's health. Alternative solutions are becoming crucial to improve urban living conditions, and to shorten water and nutrient flows into circulation of used water and nutrient in human excreta. The speakers presented a wide range of experiences of "closing the loops" and thereby turning potential waste into productive use. The focus of the workshop deliberations was on simplifying the hygienisation of urine and faeces and the reuse in food production by using urine-diverting toilets, as well as innovative ways to recycle sewage after various stages of treatment.

  4. Analysis of Adsorbed Natural Gas Tank Technology

    NASA Astrophysics Data System (ADS)

    Knight, Ernest; Schultz, Conrad; Rash, Tyler; Dohnke, Elmar; Stalla, David; Gillespie, Andrew; Sweany, Mark; Seydel, Florian; Pfeifer, Peter

    With gasoline being an ever decreasing finite resource and with the desire to reduce humanity's carbon footprint, there has been an increasing focus on innovation of alternative fuel sources. Natural gas burns cleaner, is more abundant, and conforms to modern engines. However, storing compressed natural gas (CNG) requires large, heavy gas cylinders, which limits space and fuel efficiency. Adsorbed natural gas (ANG) technology allows for much greater fuel storage capacity and the ability to store the gas at a much lower pressure. Thus, ANG tanks are much more flexible in terms of their size, shape, and weight. Our ANG tank employs monolithic nanoporous activated carbon as its adsorbent material. Several different configurations of this Flat Panel Tank Assembly (FPTA) along with a Fuel Extraction System (FES) were examined to compare with the mass flow rate demands of an engine.

  5. Benchmarking survey for recycling.

    SciTech Connect

    Marley, Margie Charlotte; Mizner, Jack Harry

    2005-06-01

    This report describes the methodology, analysis and conclusions of a comparison survey of recycling programs at ten Department of Energy sites including Sandia National Laboratories/New Mexico (SNL/NM). The goal of the survey was to compare SNL/NM's recycling performance with that of other federal facilities, and to identify activities and programs that could be implemented at SNL/NM to improve recycling performance.

  6. Rotary adsorbers for continuous bulk separations

    DOEpatents

    Baker, Frederick S.

    2011-11-08

    A rotary adsorber for continuous bulk separations is disclosed. The rotary adsorber includes an adsorption zone in fluid communication with an influent adsorption fluid stream, and a desorption zone in fluid communication with a desorption fluid stream. The fluid streams may be gas streams or liquid streams. The rotary adsorber includes one or more adsorption blocks including adsorbent structure(s). The adsorbent structure adsorbs the target species that is to be separated from the influent fluid stream. The apparatus includes a rotary wheel for moving each adsorption block through the adsorption zone and the desorption zone. A desorption circuit passes an electrical current through the adsorbent structure in the desorption zone to desorb the species from the adsorbent structure. The adsorbent structure may include porous activated carbon fibers aligned with their longitudinal axis essentially parallel to the flow direction of the desorption fluid stream. The adsorbent structure may be an inherently electrically-conductive honeycomb structure.

  7. Combustion Byproducts Recycling Consortium

    SciTech Connect

    Paul Ziemkiewicz; Tamara Vandivort; Debra Pflughoeft-Hassett; Y. Paul Chugh; James Hower

    2008-08-31

    Ashlines: To promote and support the commercially viable and environmentally sound recycling of coal combustion byproducts for productive uses through scientific research, development, and field testing.

  8. Recycling behaviour in healthcare: waste handling at work.

    PubMed

    Vogt, Joachim; Nunes, Katia R A

    2014-01-01

    This article reviews the motivational factors for environmental behaviour in general, presenting a case study on recycling disposable plastics in hospitals. Results show that 90% of over 600 employees from six analysed hospitals in Germany reported that the recycling of disposable plastics on the wards makes sense from an environmental and economic point of view. The case study reports an assessment of recycling attitudes and problems of hospital staff, mainly nurses. Employees in eco-certified hospitals were much more satisfied and reported fewer problems with the recycling system. The gender effect was significant only for saving energy, while age correlated with nearly all reported pro-environmental behaviour at home. At work, the mere introduction of a recycling system was insufficient to achieve good recycling results. Based on the study findings, recommendations are given aimed at improving the safety and sustainability of the recycling system.

  9. Recycling behaviour in healthcare: waste handling at work.

    PubMed

    Vogt, Joachim; Nunes, Katia R A

    2014-01-01

    This article reviews the motivational factors for environmental behaviour in general, presenting a case study on recycling disposable plastics in hospitals. Results show that 90% of over 600 employees from six analysed hospitals in Germany reported that the recycling of disposable plastics on the wards makes sense from an environmental and economic point of view. The case study reports an assessment of recycling attitudes and problems of hospital staff, mainly nurses. Employees in eco-certified hospitals were much more satisfied and reported fewer problems with the recycling system. The gender effect was significant only for saving energy, while age correlated with nearly all reported pro-environmental behaviour at home. At work, the mere introduction of a recycling system was insufficient to achieve good recycling results. Based on the study findings, recommendations are given aimed at improving the safety and sustainability of the recycling system. PMID:24617848

  10. Electronic structure of benzene adsorbed on Ni and Cu surfaces

    SciTech Connect

    Weinelt, M.; Nilsson, A.; Wassdahl, N.

    1997-04-01

    Benzene has for a long time served as a prototype adsorption system of large molecules. It adsorbs with the molecular plane parallel to the surface. The bonding of benzene to a transition metal is typically viewed to involve the {pi} system. Benzene adsorbs weakly on Cu and strongly on Ni. It is interesting to study how the adsorption strength is reflected in the electronic structure of the adsorbate-substrate complex. The authors have used X-ray Emission (XE) and X-ray Absorption (XA) spectroscopies to selectively study the electronic states localized on the adsorbed benzene molecule. Using XES the occupied states can be studies and with XAS the unoccupied states. The authors have used beamline 8.0 and the Swedish endstation equipped with a grazing incidence x-ray spectrometer and a partial yield absorption detector. The resolution in the XES and XAS were 0.5 eV and 0.05 eV, respectively.

  11. Recycle with Heating: A Laboratory Experiment.

    ERIC Educational Resources Information Center

    Foord, A.; Mason, G.

    1985-01-01

    Describes an apparatus (built from domestic plumbing pipes and fittings) that uses only water and electricity (as consumables) to investigate basic mass and heat balances in a system with recycle. Also describes experiments using the apparatus. (JN)

  12. 3He Bilayer Film Adsorbed on Graphite Plated with a Bilayer of 4He: a New Frustrated 2D Magnetic System

    NASA Astrophysics Data System (ADS)

    Neumann, Michael; Nyéki, Ján; Cowan, Brian; Saunders, John

    2006-09-01

    The heat capacity and NMR response of a 3He bilayer adsorbed on graphite plated with a bilayer of 4He have been measured over the temperature range 1-80 mK. We find that the first 3He layer requires the presence of a 3He fluid overlayer before it solidifies. Solidification is completed at a total coverage close to 9.85 nm-2, On further increasing the coverage the heat capacity maximum grows from `antiferromagnetic-like' (AFM-like) to `ferromagnetic-like' (FM-like). On the other hand, when the 3He layer first solidifies, it has a low temperature saturation magnetisation corresponding to a significant fraction of full polarisation, and this increases with increasing coverage. Furthermore the effective exchange constant inferred from the high temperature magnetisation data is always ferromagnetic. The effective exchange constants inferred from the heat capacity and magnetisation are significantly larger than those observed in the second layer of pure 3He films adsorbed on bare graphite. Otherwise there are strong similarities in the coverage dependence of the heat capacity and magnetisation, providing fresh insights into how the magnetic ground state of such 2D magnets evolves as the frustration is tuned with increasing coverage.

  13. Is Municipal Solid Waste Recycling Economically Efficient?

    NASA Astrophysics Data System (ADS)

    Lavee, Doron

    2007-12-01

    It has traditionally been argued that recycling municipal solid waste (MSW) is usually not economically viable and that only when externalities, long-term dynamic considerations, and/or the entire product life cycle are taken into account, recycling becomes worthwhile from a social point of view. This article explores the results of a wide study conducted in Israel in the years 2000 2004. Our results reveal that recycling is optimal more often than usually claimed, even when externality considerations are ignored. The study is unique in the tools it uses to explore the efficiency of recycling: a computer-based simulation applied to an extensive database. We developed a simulation for assessing the costs of handling and treating MSW under different waste-management systems and used this simulation to explore possible cost reductions obtained by designating some of the waste (otherwise sent to landfill) to recycling. We ran the simulation on data from 79 municipalities in Israel that produce over 60% of MSW in Israel. For each municipality, we were able to arrive at an optimal method of waste management and compare the costs associated with 100% landfilling to the costs born by the municipality when some of the waste is recycled. Our results indicate that for 51% of the municipalities, it would be efficient to adopt recycling, even without accounting for externality costs. We found that by adopting recycling, municipalities would be able to reduce direct costs by an average of 11%. Through interviews conducted with representatives of municipalities, we were also able to identify obstacles to the utilization of recycling, answering in part the question of why actual recycling levels in Israel are lower than our model predicts they should be.

  14. Is municipal solid waste recycling economically efficient?

    PubMed

    Lavee, Doron

    2007-12-01

    It has traditionally been argued that recycling municipal solid waste (MSW) is usually not economically viable and that only when externalities, long-term dynamic considerations, and/or the entire product life cycle are taken into account, recycling becomes worthwhile from a social point of view. This article explores the results of a wide study conducted in Israel in the years 2000-2004. Our results reveal that recycling is optimal more often than usually claimed, even when externality considerations are ignored. The study is unique in the tools it uses to explore the efficiency of recycling: a computer-based simulation applied to an extensive database. We developed a simulation for assessing the costs of handling and treating MSW under different waste-management systems and used this simulation to explore possible cost reductions obtained by designating some of the waste (otherwise sent to landfill) to recycling. We ran the simulation on data from 79 municipalities in Israel that produce over 60% of MSW in Israel. For each municipality, we were able to arrive at an optimal method of waste management and compare the costs associated with 100% landfilling to the costs born by the municipality when some of the waste is recycled. Our results indicate that for 51% of the municipalities, it would be efficient to adopt recycling, even without accounting for externality costs. We found that by adopting recycling, municipalities would be able to reduce direct costs by an average of 11%. Through interviews conducted with representatives of municipalities, we were also able to identify obstacles to the utilization of recycling, answering in part the question of why actual recycling levels in Israel are lower than our model predicts they should be.

  15. Electric Field Cancellation on Quartz by Rb Adsorbate-Induced Negative Electron Affinity

    NASA Astrophysics Data System (ADS)

    Sedlacek, J. A.; Kim, E.; Rittenhouse, S. T.; Weck, P. F.; Sadeghpour, H. R.; Shaffer, J. P.

    2016-04-01

    We investigate the (0001) surface of single crystal quartz with a submonolayer of Rb adsorbates. Using Rydberg atom electromagnetically induced transparency, we investigate the electric fields resulting from Rb adsorbed on the quartz surface, and measure the activation energy of the Rb adsorbates. We show that the adsorbed Rb induces negative electron affinity (NEA) on the quartz surface. The NEA surface allows low energy electrons to bind to the surface and cancel the electric field from the Rb adsorbates. Our results will be important for integrating Rydberg atoms into hybrid quantum systems, as fundamental probes of atom-surface interactions, and for studies of 2D electron gases bound to surfaces.

  16. Electric Field Cancellation on Quartz by Rb Adsorbate-Induced Negative Electron Affinity.

    PubMed

    Sedlacek, J A; Kim, E; Rittenhouse, S T; Weck, P F; Sadeghpour, H R; Shaffer, J P

    2016-04-01

    We investigate the (0001) surface of single crystal quartz with a submonolayer of Rb adsorbates. Using Rydberg atom electromagnetically induced transparency, we investigate the electric fields resulting from Rb adsorbed on the quartz surface, and measure the activation energy of the Rb adsorbates. We show that the adsorbed Rb induces negative electron affinity (NEA) on the quartz surface. The NEA surface allows low energy electrons to bind to the surface and cancel the electric field from the Rb adsorbates. Our results will be important for integrating Rydberg atoms into hybrid quantum systems, as fundamental probes of atom-surface interactions, and for studies of 2D electron gases bound to surfaces. PMID:27081976

  17. Technology development for lunar base water recycling

    NASA Technical Reports Server (NTRS)

    Schultz, John R.; Sauer, Richard L.

    1992-01-01

    This paper will review previous and ongoing work in aerospace water recycling and identify research activities required to support development of a lunar base. The development of a water recycle system for use in the life support systems envisioned for a lunar base will require considerable research work. A review of previous work on aerospace water recycle systems indicates that more efficient physical and chemical processes are needed to reduce expendable and power requirements. Development work on biological processes that can be applied to microgravity and lunar environments also needs to be initiated. Biological processes are inherently more efficient than physical and chemical processes and may be used to minimize resupply and waste disposal requirements. Processes for recovering and recycling nutrients such as nitrogen, phosphorus, and sulfur also need to be developed to support plant growth units. The development of efficient water quality monitors to be used for process control and environmental monitoring also needs to be initiated.

  18. Evaluation of Recycle Grinding Performance in Flour Milling

    NASA Astrophysics Data System (ADS)

    Mazlina Mustapa Kamal, Siti; Webb, Colin

    A typical flour milling process is a very linear operation that is almost entirely void of recycled streams where separate fractions from each operation go ahead as new streams to the next operation. In some cases, there are opportunities for combining some streams, for recycling particles that have been insufficiently broken to go back to the same roller mill. This study introduces this recycle concept in flour milling process at second break system. The recycle grinding assessment was made using a Satake STR-100 test roller mill. The recycle process was started after the second break system and the number of recycle grinding was up to 7 regrinds. The particle size distribution and ash analysis were produced to describe the behaviour of the recycle grinding performance. The material release was sifted on a range of sieves and the ash content was analysed using a laboratory furnace. The performance for each recycle stage was investigated. It was determined that it is possible for some coarse particles that contain only bran to keep being recycled in the recycle circuit. A purging operation was recommended to be included in the recycle system, to separate the unwanted particles.

  19. A Novel Aqueous Two Phase System Composed of Surfactant and Xylitol for the Purification of Lipase from Pumpkin (Cucurbita moschata) Seeds and Recycling of Phase Components.

    PubMed

    Amid, Mehrnoush; Manap, Mohd Yazid; Hussin, Muhaini; Mustafa, Shuhaimi

    2015-06-17

    Lipase is one of the more important enzymes used in various industries such as the food, detergent, pharmaceutical, textile, and pulp and paper sectors. A novel aqueous two-phase system composed of surfactant and xylitol was employed for the first time to purify lipase from Cucurbita moschata. The influence of different parameters such as type and concentration of surfactants, and the composition of the surfactant/xylitol mixtures on the partitioning behavior and recovery of lipase was investigated. Moreover, the effect of system pH and crude load on the degree of purification and yield of the purified lipase were studied. The results indicated that the lipase was partitioned into the top surfactant rich phase while the impurities partitioned into the bottom xylitol-rich phase using an aqueous two phase system composed of 24% (w/w) Triton X-100 and 20% (w/w) xylitol, at 56.2% of tie line length (TLL), (TTL is one of the important parameters in this study and it is determined from a bimodal curve in which the tie-line connects two nodes on the bimodal, that represent concentration of phase components in the top and bottom phases) and a crude load of 25% (w/w) at pH 8.0. Recovery and recycling of components was also measured in each successive step process. The enzyme was successfully recovered by the proposed method with a high purification factor of 16.4 and yield of 97.4% while over 97% of the phase components were also recovered and recycled. This study demonstrated that the proposed novel aqueous two phase system method is more efficient and economical than the traditional aqueous two phase system method for the purification and recovery of the valuable enzyme lipase.

  20. A Novel Aqueous Two Phase System Composed of Surfactant and Xylitol for the Purification of Lipase from Pumpkin (Cucurbita moschata) Seeds and Recycling of Phase Components.

    PubMed

    Amid, Mehrnoush; Manap, Mohd Yazid; Hussin, Muhaini; Mustafa, Shuhaimi

    2015-01-01

    Lipase is one of the more important enzymes used in various industries such as the food, detergent, pharmaceutical, textile, and pulp and paper sectors. A novel aqueous two-phase system composed of surfactant and xylitol was employed for the first time to purify lipase from Cucurbita moschata. The influence of different parameters such as type and concentration of surfactants, and the composition of the surfactant/xylitol mixtures on the partitioning behavior and recovery of lipase was investigated. Moreover, the effect of system pH and crude load on the degree of purification and yield of the purified lipase were studied. The results indicated that the lipase was partitioned into the top surfactant rich phase while the impurities partitioned into the bottom xylitol-rich phase using an aqueous two phase system composed of 24% (w/w) Triton X-100 and 20% (w/w) xylitol, at 56.2% of tie line length (TLL), (TTL is one of the important parameters in this study and it is determined from a bimodal curve in which the tie-line connects two nodes on the bimodal, that represent concentration of phase components in the top and bottom phases) and a crude load of 25% (w/w) at pH 8.0. Recovery and recycling of components was also measured in each successive step process. The enzyme was successfully recovered by the proposed method with a high purification factor of 16.4 and yield of 97.4% while over 97% of the phase components were also recovered and recycled. This study demonstrated that the proposed novel aqueous two phase system method is more efficient and economical than the traditional aqueous two phase system method for the purification and recovery of the valuable enzyme lipase. PMID:26091076

  1. Recycling rubber wastes. (Latest citations from the rubber and plastics research association database). Published Search

    SciTech Connect

    Not Available

    1994-05-01

    The bibliography contains citations concerning research and innovations in the recycling of rubber wastes. Recycling methods and equipment, applications of recycled rubber, and energy recovery systems and performance are among the topics discussed. Recycling methods compared and contrasted with various rubber waste disposal techniques are also included. (Contains a minimum of 89 citations and includes a subject term index and title list.)

  2. Recycling rubber wastes. (Latest citations from the Rubber and Plastics Research Association database). Published Search

    SciTech Connect

    1995-02-01

    The bibliography contains citations concerning research and innovations in the recycling of rubber wastes. Recycling methods and equipment, applications of recycled rubber, and energy recovery systems and performance are among the topics discussed. Recycling methods compared and contrasted with various rubber waste disposal techniques are also included. (Contains a minimum of 96 citations and includes a subject term index and title list.)

  3. Carbon dioxide recycling

    EPA Science Inventory

    The recycling of carbon dioxide to methanol and dimethyl ether is seen to offer a substantial route to renewable and environmentally carbon neutral fuels. One of the authors has championed the “Methanol Economy" in articles and a book. By recycling ambient CO2, the authors argue ...

  4. Recycling at Camp.

    ERIC Educational Resources Information Center

    Cummins, William M.

    1988-01-01

    Outlines a Michigan summer camp's efforts to reduce solid waste disposal by recycling cardboard, tin, glass, aluminum, and plastic milk containers. Points out variables affecting the success of such efforts. Discusses Michigan state funding for the development of recycling programs. (SV)

  5. Wee Recyclers Resources.

    ERIC Educational Resources Information Center

    Wisconsin State Dept. of Natural Resources, Madison.

    Hands-on activities in this guide are designed to help preschool children (ages 3-5) understand that reducing, reusing, and recycling preserves natural resources and prolongs the life of landfills. Children sort, match and compare recyclable items and learn to separate some items by number and color. The 29 activities are divided into units that…

  6. Equilibrium molecular theory of two-dimensional adsorbate drops on surfaces of heterogeneous adsorbents

    NASA Astrophysics Data System (ADS)

    Tovbin, Yu. K.

    2016-08-01

    A molecular statistical theory for calculating the linear tension of small multicomponent droplets in two-dimensional adsorption systems is developed. The theory describes discrete distributions of molecules in space (on a scale comparable to molecular size) and continuous distributions of molecules (at short distances inside cells) in their translational and vibrational motions. Pair intermolecular interaction potentials (the Mie type potential) in several coordination spheres are considered. For simplicity, it is assumed that distinctions in the sizes of mixture components are slight and comparable to the sizes of adsorbent adsorption centers. Expressions for the pressure tensor components inside small droplets on the heterogeneous surface of an adsorbent are obtained, allowing calculations of the thermodynamic characteristics of a vapor-fluid interface, including linear tension. Problems in refining the molecular theory are discussed: describing the properties of small droplets using a coordination model of their structure, considering the effect an adsorbate has on the state of a near-surface adsorbent region, and the surface heterogeneity factor in the conditions for the formation of droplets.

  7. Discharge Plasma Assisted Adsorbents for Exhaust Treatment: A Comparative Analysis on Enhancing NOx Removal

    NASA Astrophysics Data System (ADS)

    Rajanikanth, B. S.; Dipanwita, Sinha; Emmanuel, P.

    2008-06-01

    An analysis has been made on the discharge plasma coupled with an adsorbent system for NOx removal. The cascaded plasma-adsorbent system may be perceived as a better alternative for the existing adsorbent-based abatement system in the industry. In this study the exhaust is sourced from a diesel generator set. It was observed that better NO removal in a plasma reactor can be made possible by achieving higher average fields and subsequent NO2 removal can be improved using an adsorbent system connected in cascade with the plasma system. The paper describes various findings pertaining to these comparative analyses.

  8. A recyclable ionic liquid-oxomolybdenum(vi) catalytic system for the oxidative desulfurization of model and real diesel fuel.

    PubMed

    Julião, Diana; Gomes, Ana C; Pillinger, Martyn; Valença, Rita; Ribeiro, Jorge C; Gonçalves, Isabel S; Balula, Salete S

    2016-10-14

    The oxidative desulfurization of model and real diesel has been studied using the complex [MoO2Cl2(4,4'-di-tert-butyl-2,2'-bipyridine)] as (pre)catalyst, aq. H2O2 as oxidant, and an ionic liquid as extraction solvent. Under moderate conditions (50 °C) and short reaction times (<3 h), dibenzothiophene, 4-methyldibenzothiophene and 4,6-dimethyldibenzothiophene could be completely removed from the model diesel. The (pre)catalyst 1 was transformed in situ to the active catalyst [MoO(O2)2(di-tBu-bipy)]. By sequentially performing extractive desulfurization and ECODS steps, 76% sulfur removal was achieved for a real diesel (Sinitial = 2300 ppm). For both the model and real diesels, the catalyst/IL phase could be easily recycled and reused with no loss of desulfurization efficiency. PMID:27603728

  9. A recyclable ionic liquid-oxomolybdenum(vi) catalytic system for the oxidative desulfurization of model and real diesel fuel.

    PubMed

    Julião, Diana; Gomes, Ana C; Pillinger, Martyn; Valença, Rita; Ribeiro, Jorge C; Gonçalves, Isabel S; Balula, Salete S

    2016-10-14

    The oxidative desulfurization of model and real diesel has been studied using the complex [MoO2Cl2(4,4'-di-tert-butyl-2,2'-bipyridine)] as (pre)catalyst, aq. H2O2 as oxidant, and an ionic liquid as extraction solvent. Under moderate conditions (50 °C) and short reaction times (<3 h), dibenzothiophene, 4-methyldibenzothiophene and 4,6-dimethyldibenzothiophene could be completely removed from the model diesel. The (pre)catalyst 1 was transformed in situ to the active catalyst [MoO(O2)2(di-tBu-bipy)]. By sequentially performing extractive desulfurization and ECODS steps, 76% sulfur removal was achieved for a real diesel (Sinitial = 2300 ppm). For both the model and real diesels, the catalyst/IL phase could be easily recycled and reused with no loss of desulfurization efficiency.

  10. Recycling efficiencies of C,H,O,N,S, and P elements in a biological life support system based on micro-organisms and higher plants

    NASA Astrophysics Data System (ADS)

    Gros, J. B.; Poughon, L.; Lasseur, C.; Tikhomirov, A. A.

    MELiSSA is a microorganism based artificial ecosystem conceived as a tool for understanding the behavior of ecosystems and developing the technology for future Manned Space Missions. MELiSSA is composed of four compartments colonized by the microorganisms required by the function of this ecosystem : breakdown of waste produced by men, regeneration of atmosphere and biosynthesis of edible biomass. This paper reports the mass balance description of a Biological Life Support System composed of the MELiSSA loop and of a Higher Plant Compartment working in parallel with the photosynthetic Spirulina compartment producing edible biomass. The recycling efficiencies of the system are determined and compared for various working conditions of the MELiSSA loop with or without the HPC.

  11. Advances in plastic recycling. Volume 1: Recycling of polyurethanes

    SciTech Connect

    Frisch, K.C.; Klempner, D.; Prentice, G.

    1999-07-01

    ``Recycling of Polyurethanes'', the first volume in the Advances in Plastics Recycling series, is focused on the physical and chemical recycling of polyurethanes, with attention given to energy conversion. A compilation of the present ongoing studies on recycling of urethane and, in general, isocyanate-based polymers, the focus is on thermosetting urethane polymers. Contents include: Recycling of Polyurethane Plastics in the European Automotive Industry; Present State of Polyurethane Recycling in Europe; Processing Overview of Bonded Polyurethane Foam; Mechanical Recycling of Polyurethane Scrap; Ecostream{trademark}--A Technology Beyond Recycling; Recycling of Flexible polyurethane Foam; General purpose Adhesives Prepared from Chemically Recycled Waste Rigid Polyurethane Foams; and Utilization of Isocyanate Binders in Recycling of Scrap Automotive Headliners.

  12. Cell phone recycling experiences in the United States and potential recycling options in Brazil.

    PubMed

    Silveira, Geraldo T R; Chang, Shoou-Yuh

    2010-11-01

    This paper presents an overview of cell phone recycling programs currently available in the United States. At the same time, it also provides analyses of the current recycling situation and possible recycling alternatives for Brazil. Although there are several recycling options in the United States, collection rates are still only 10% of all potential devices because customers are not aware of these possibilities. The whole system is financially based on reselling refurbished cell phones and recycled materials to developing countries which represent an effective and strong market. Several recyclers offer funds to collection partners who are either charities or who work with charities while obtaining the materials that they need in order to run their operations. A mobile phone recycling system for Brazil considering the United States experience and the Extended Producer Responsibility (EPR) principle is suggested. A deposit/refund/advance-recycling fee is proposed which might be implemented as a voluntary industrial initiative managed by PRO Brazil, a producer responsibility organization. One widespread public-private agreement will integrate all mobile phone stakeholders, and environmental education actions and promotional events will promote citizen's participation.

  13. Gold recovery from low concentrations using nanoporous silica adsorbent

    NASA Astrophysics Data System (ADS)

    Aledresse, Adil

    The development of high capacity adsorbents with uniform porosity denoted 5%MP-HMS (5% Mercaptopropyl-Hexagonal Mesoporous Structure) to extract gold from noncyanide solutions is presented. The preliminary studies from laboratory simulated noncyanide gold solutions show that the adsorption capacities of these materials are among the highest reported. The high adsorption saturation level of these materials, up to 1.9 mmol/g (37% of the adsorbent weight) from gold chloride solutions (potassium tetrachloroaurate) and 2.9 mmol/g (57% of the adsorbent weight) from gold bromide solutions (potassium tetrabromoaurate) at pH = 2, is a noteworthy feature of these materials. This gold loading from [AuC4]- and [AuBr4 ]- solutions corresponds to a relative Au:S molar ratio of 2.5:1 and 3.8:1, respectively. These rates are significantly higher than the usual 1:1 (Au:S) ratio expected for metal ion binding with the material. The additional gold ions loaded have been spontaneously reduced to metallic gold in the mesoporous material. Experimental studies indicated high maximum adsorptions of gold as high as 99.9% recovery. Another promising attribute of these materials is their favourable adsorption kinetics. The MP-HMS reaches equilibrium (saturation) in less than 1 minute of exposure in gold bromide and less than 10 minutes in gold chloride. The MP-HMS materials adsorption is significantly improved by agitation and the adsorption capacity of Au (III) ions increases with the decrease in pH. The recovery of adsorbed gold and the regeneration of spent adsorbent were investigated for MP-HMS adsorbent. The regenerated adsorbent (MP-HMS) maintained its adsorption capacity even after repeated use and all the gold was successfully recovered from the spent adsorbent. For the fist time, a promising adsorbent system has been found that is capable of effectively concentrating gold thiosulphate complexes, whereas conventional carbon-inpulp (CIP) and carbon-in-leach (CIL) systems fail. The

  14. Solvent Design Methodology to Recycle Chamber Parts and Recover Platinum by Highly Selective Wet Treatment for Ni-Pt Sputtering System

    NASA Astrophysics Data System (ADS)

    Futase, Takuya; Sabae, Yoshichika; Tanimoto, Hisanori

    2013-11-01

    In this paper, we describe a methodology of solvent design for selective removal of nickel-platinum (Ni-Pt) alloy film deposited on the surface of stainless-steel (SUS) chamber parts, based on electrochemistry. Several removal treatments were compared, such as sandblast-based physical treatment, pre sprayed aluminum lift-off treatment, and a newly proposed dilute-acid treatment. When using dilute acid with a redox potential between 0.75-0.85 V for Ni-Pt removal, no obvious damage was observed on the chamber parts after the treatment. The recycled parts were adequately worked in the sputtering chamber for mass production without causing the particle problem. Furthermore, we acquired losses of only 1.1% for platinum recovery efficiency in the Ni-Pt sputtering system.

  15. Solvent recycle/recovery

    SciTech Connect

    Paffhausen, M.W.; Smith, D.L.; Ugaki, S.N.

    1990-09-01

    This report describes Phase I of the Solvent Recycle/Recovery Task of the DOE Chlorinated Solvent Substitution Program for the US Air Force by the Idaho National Engineering Laboratory, EG G Idaho, Inc., through the US Department of Energy, Idaho Operations Office. The purpose of the task is to identify and test recovery and recycling technologies for proposed substitution solvents identified by the Biodegradable Solvent Substitution Program and the Alternative Solvents/Technologies for Paint Stripping Program with the overall objective of minimizing hazardous wastes. A literature search to identify recycle/recovery technologies and initial distillation studies has been conducted. 4 refs.

  16. Quality requirements for reclaimed/recycled water

    NASA Technical Reports Server (NTRS)

    Janik, Daniel S.; Sauer, Richard L.; Pierson, Duane L.; Thorstenson, Yvonne R.

    1987-01-01

    Water used during current and previous space missions has been either carried or made aloft. Future human space endeavors will require some form of water reclamation and recycling. There is little experience in the U.S. space program with this technology. Water reclamation and recycling constitute engineering challenges of the broadest nature that will require an intensive research and development effort if this technology is to mature in time for practical use on the proposed U.S. Space Station. In order for this to happen, reclaimed/recycled water specifications will need to be devised to guide engineering development. Present NASA Potable Water Specifications are not applicable to reclaimed or recycled water. Adequate specifications for ensuring the quality of the reclaimed or recycled potable water system is reviewed, limitations of present water specifications are examined, world experience with potable water reclamation/recycling systems and systems analogs is reviewed, and an approach to developing pertinent biomedical water specifications for spacecraft is presented. Space Station water specifications should be designed to ensure the health of all likely spacecraft inhabitants including man, animals, and plants.

  17. Plastics waste trashes German recycling scheme

    SciTech Connect

    Chynoweth, E.

    1993-06-30

    Plastics waste is causing a major headache for Duales System Deutschland (DSD: Bonn), one of Europe`s groundbreaking national packaging recycling programs. Five of Germany`s states have threatened to withdraw from the plan mainly because of the lack of plastics recycling capacity, says a DSD spokeswoman. {open_quotes}The pace of establishing recycling capacity does not meet the zeal in collection.{close_quotes} she notes. In addition, the organization has been crippled by a lack of funds. It claims that up to half the subscribers to the scheme - who pay a fee to display a green dot on packaging - are either irregular payers or not paying fees in proportion to their use of the green dot. The cost of setting up and paying for plastics recycling - not originally part of DSD`s responsibility - is also hurting the organization.

  18. Benchmarking in municipal solid waste recycling.

    PubMed

    Lavee, Doron; Khatib, Mahmood

    2010-11-01

    The paper presents an analysis of the factors influencing the recycling potential of municipalities in Israel, including population size and density, geographic location, current waste levels, and current waste management system. We employ a standard regression analysis in order to develop an econometric model to predict where potential for economically efficient recycling is highest. By applying this model to readily available data, it is possible to predict with close to 90% accuracy whether or not recycling will be economically efficient in any given municipality. Government agencies working to promote advanced waste management solutions have at their disposal only limited resources and budget, and so must concentrate their efforts where they will be most effective. The paper thus provides policy-makers with a powerful tool to help direct their efforts to promote recycling at those municipalities where it is indeed optimal.

  19. Recycle plastics into feedstocks

    SciTech Connect

    Kastner, H.; Kaminsky, W.

    1995-05-01

    Thermal cracking of mixed-plastics wastes with a fluidized-bed reactor can be a viable and cost-effective means to meet mandatory recycling laws. Strict worldwide environmental statutes require the hydrocarbon processing industry (HPI) to develop and implement product applications and technologies that reuse post-consumer mixed-plastics waste. Recycling or reuse of plastics waste has a broad definition. Recycling entails more than mechanical regranulation and remelting of polymers for film and molding applications. A European consortium of academia and refiners have investigated if it is possible and profitable to thermally crack plastics into feedstocks for refining and petrochemical applications. Development and demonstration of pyrolysis methods show promising possibilities of converting landfill garbage into valuable feedstocks such as ethylene, propylene, BTX, etc. Fluidized-bed reactor technologies offer HPI operators a possible avenue to meet recycling laws, conserve raw materials and yield a profit. The paper describes thermal cracking for feedstocks and pyrolysis of polyolefins.

  20. The Totem Pole Recycled.

    ERIC Educational Resources Information Center

    Sewall, Susan Breyer

    1991-01-01

    Presents an activity that integrates science, environmental education, art, and social studies. Students identify and research an endangered species and construct a totem pole depicting the species using a recyclable material. (MDH)

  1. A Practical Recycling Project . . .

    ERIC Educational Resources Information Center

    Durant, Raymond H.; Mikuska, James M.

    1973-01-01

    Descirbes a school district's recycling program of aluminum lunch trays that are collected after their use. The trays are used as scrap metal in industrial education workshop and used for sand castings. (PS)

  2. Supercritical fluid regeneration of adsorbents

    NASA Astrophysics Data System (ADS)

    Defilippi, R. P.; Robey, R. J.

    1983-05-01

    The results of a program to perform studies supercritical (fluid) carbon dioxide (SCF CO2) regeneration of adsorbents, using samples of industrial wastewaters from manufacturing pesticides and synthetic solution, and to estimate the economics of the specific wastewater treatment regenerations, based on test data are given. Processing costs for regenerating granular activated carbon GAC) for treating industrial wastewaters depend on stream properties and regeneration throughput.

  3. Adsorption removal of pollutants by active cokes produced from sludge in the energy recycle process of wastes.

    PubMed

    Kojima, Naozumi; Mitomo, Aki; Itaya, Yoshinori; Mori, Shigekatsu; Yoshida, Shuichi

    2002-01-01

    This study proposes a recycling system of sludge into active cokes and the fundamental examinations for the application were carried out. In the system, active cokes were produced by carbonizing pellets of sludge in a steam stream. Pyrolysis gas yielded by carbonization can be available to a fuel for a steam generation boiler. The exhaust heat from the boiler is used sequentially for drying of sludge. The active cokes are applied to the adsorbent for dioxin removal in exhaust gas from incinerators of wastes, or for purification of gas obtained in a gasification process of wastes, particularly removal of H2S. The used adsorbent is not recycled, but incinerated in the furnace without a desorption process to decompose adsorbed dioxin or to oxidize H2S for a sequential desulfurization process of SO2. Dry pellets of sludge were carbonized in a quartz tube reactor under various atmospheres. The micro pore structure and the adsorption performance of the cokes produced without activation process were examined. The micro pore structure was influenced by the temperature, the sort of flow gas (N2, CO2 and steam) and carbonization time, and the active cokes produced under the condition of the temperature 823 K for 60 min in the steam atmosphere had a largest specific surface area in the diameter less than 5 nm. The amount of benzene adsorption as an alternative substance of dioxin into the active cokes had a similar quality to a commercial active char produced from coal if it was evaluated by adsorption per a unit specific surface area. This fundamental knowledge must be reflected to an optimum design for development of a simple continuous process to produce the active cokes by a fluidized bed type of the carbonization furnace.

  4. Halophytic plants as a component of a bioregenerative life support system for recycling of NaCl contained in human liquid waste.

    NASA Astrophysics Data System (ADS)

    Balnokin, Yurii; Balnokin, Yurii; Myasoedov, Nikolay; Popova, Larissa; Tikhomirov, Alexander A.; Ushakova, Sofya; Tikhomirova, Natalia; Lasseur, Christophe; Gros, Jean-Bernard

    Currently, the closure of matter turnover is one of the urgent problems of bioregenerative life support system (BLSS) designing. The important aspect of the problem is involving of substances contained in liquid and solid exometabolites of humans inhabiting BLSS into intrasystem matter turnover. Recycling of Na+ and Cl- contained in human liquid exometabolites, i.e. urine is acknowledged to be among the main tasks of the matter turnover in BLSS. The ions excreted with urine may be returned to human organism with food. A way to allow this is including edible halophytic plants into the phototrophic compartment of BLSS. Halophytes are defined as plants which can grow on saline soils and produce high biomass under these conditions. Some halophytes can take up high quantities of Na+ and Cl- and accumulate the ions in the shoots or extrude them to leaf surface by means of salt glands. To allow Na+ and Cl- recycling through halophyte utilization, the following principal steps should be accomplished: (i) mineralization of the exometabolites by physicochemical methods; (ii) oxidation of ammonia formed during the exometabolite mineralization to nitrate by nitrifying bacteria, (iii) growing the halophyte on the nutrient solution prepared on the basis of the mineralized exometabolites, (iv) introducing the halophyte green biomass into human food. The present work is devoted to the following problems: (i) selection of a salt-accumulating/extruding halophytic plant suitable for Na+ and Cl- recycling in BLSS and (ii) parameter evaluation of a plant conveyor containing the halophytic plants at various ages. Halophytic plants selected for BLSS should meet the following criteria: (i) ability to grow under 24-hour-illumination, (ii) high productivity, (iii) ability to accumulate Na+ and Cl- in high quantities in shoots or to excrete salts to leaf surface, (iv) edibility, and (v) high nutritive value of the biomass. Relying on these criteria, salt-accumulating halophyte Salicornia

  5. Perspectives on recycling centres and future developments.

    PubMed

    Engkvist, I-L; Eklund, J; Krook, J; Björkman, M; Sundin, E

    2016-11-01

    The overall aim of this paper is to draw combined, all-embracing conclusions based on a long-term multidisciplinary research programme on recycling centres in Sweden, focussing on working conditions, environment and system performance. A second aim is to give recommendations for their development of new and existing recycling centres and to discuss implications for the future design and organisation. Several opportunities for improvement of recycling centres were identified, such as design, layout, ease with which users could sort their waste, the work environment, conflicting needs and goals within the industry, and industrialisation. Combining all results from the research, which consisted of different disciplinary aspects, made it possible to analyse and elucidate their interrelations. Waste sorting quality was recognized as the most prominent improvement field in the recycling centre system. The research identified the importance of involving stakeholders with different perspectives when planning a recycling centre in order to get functionality and high performance. Practical proposals of how to plan and build recycling centres are given in a detailed checklist. PMID:26826952

  6. Recycling of nonmetallics

    USGS Publications Warehouse

    Amey, E.B.; Kelly, T.D.

    1996-01-01

    The first factor determining recyclability is the composition of the material itself. Metals, for example, can be reused with little or no loss in quality. Paper and rubber, by this criterion, are less recyclable. Each time paper is recycled, some cellulose fibers are broken. Shorter fibers can mean weaker paper of perceived lower quality and value. Vulcanizing is an irreversible chemical process that precludes recycling rubber in its original form. Both materials may be reused in other applications often of lower value than the original one. To be recyclable, the discarded material must have a collection infrastructure at the source of waste generation, at a central collection site, or at curbside. The recovered material must also have a market. If it is priced noncompetitively or no market exists, if it does not meet specifications, or if it requires special technology investments which cannot be recovered through future sales, the recovered material may be stockpiled or discarded rather than recycled. ?? 1996 International Association for Mathematical Geology.

  7. An economic and technical assessment of black-dross and salt-cake-recycling systems for application in the secondary aluminum industry

    SciTech Connect

    Karvelas, D.; Daniels, E.; Jody, B.; Bonsignore, P.

    1991-12-01

    The secondary aluminum industry annually disposes of large amounts of dross residues and salt cake, which are by-products from the processing of scrap aluminum for reuse. These wastes contain as much as 50% salts and are presently disposed of in conventional landfills. As the costs of landfill space increase and the availability of landfill space decreases, disposal of the residues will increasingly compromise the economics of recycling aluminum. Alternative processes exist by which the major constituents of the various drosses and salt cakes can be recovered for recycling. In this study, we review available recycling technologies and processes relevant to the recycling of black dross and salt cake and discuss new concepts that have the potential to improve the cost-effectiveness of recycling technologies.

  8. Phosphorylated cellulose triacetate-silica composite adsorbent for recovery of heavy metal ion.

    PubMed

    Srivastava, Niharika; Thakur, Amit K; Shahi, Vinod K

    2016-01-20

    Phosphorylated cellulose triacetate (CTA)/silica composite adsorbent was prepared by acid catalyzed sol-gel method using an inorganic precursor (3-aminopropyl triethoxysilane (APTEOS)). Reported composite adsorbent showed comparatively high adsorption capacity for Ni(II) in compare with different heavy metal ions (Cu(2+), Ni(2+), Cd(2+) and Pb(2+)). For Ni(II) adsorption, effect of time, temperature, pH, adsorbent dose and adsorbate concentration were investigated; different kinetic models were also evaluated. Thermodynamic parameters such as ΔG°, ΔH° and ΔS° were also estimated and equilibrium adsorption obeyed Langmuir and Freundlich isotherms. Developed adsorbent exhibited about 78.8% Ni(II) adsorption at pH: 6 and a suitable candidate for the removal of Ni(II) ions from wastewater. Further, about 65.5% recovery of adsorbed Ni(II) using EDTA solution was demonstrated, which suggested effective recycling of the functionalized beads would enable it to be used in the treatment of contaminated water in industry. PMID:26572476

  9. Adsorption of thorium(IV) from simulated radioactive solutions using a novel electrospun PVA/TiO2/ZnO nanofiber adsorbent functionalized with mercapto groups: Study in single and multi-component systems

    NASA Astrophysics Data System (ADS)

    Alipour, Dariush; Keshtkar, Ali Reza; Moosavian, Mohammad Ali

    2016-03-01

    The novel polyvinyl alcohol/titanium oxide/zinc oxide (PVA/TiO2/ZnO) nanofiber adsorbent functionalized with 3-mercaptopropyltrimethoxysilane (TMPTMS) was prepared by electrospinning method and its potential was investigated for the adsorption of thorium from single and multi-metal aqueous solutions. The prepared adsorbent was characterized by FTIR, SEM and BET analysis. The influences of different operational parameters such as pH, ionic strength, equilibrium time, initial concentration and temperature were studied in batch mode. Investigation of ionic strength effect showed that the addition of NaNO3 to metal solution has a slight effect on the thorium adsorption, whereas pH value has a serious effect on the thorium adsorption at pH values lower than 4. The double-exponential model described the adsorption of Th(IV) ions much better than other kinetic models within both the single and multi-component systems. Among various isotherm models used, the equilibrium data of Th(IV) conformed the Langmuir isotherm in the single system, while those were best fitted by Dubinin-Radushkevich (D-R) isotherm in multi-component system. Thermodynamic parameters such as ΔH°, ΔS°, and ΔG° indicated that the nature of adsorption process was spontaneous, endothermic and thermodynamically favored. The inhibitory effect of other metal ions on the adsorption capacity of Th(IV) was in order of Al(III) > Cu(II) > Cd(II) > Ni(II) > U(VI) > Fe(II).

  10. Compact, Lightweight Adsorber and Sabatier Reactor for CO2 Capture and Reduction for Consumable and Propellant Production

    NASA Technical Reports Server (NTRS)

    Junaedi, Christian; Hawley, Kyle; Walsh, Dennis; Roychoudhury, Subir; Busby, Stacy A.; Abney, Morgan B.; Perry, Jay L.; Knox, James C.

    2012-01-01

    The utilization of CO2 to produce (or recycle) life support consumables, such as O2 and H2O, and to generate propellant fuels is an important aspect of NASA's concept for future, long duration planetary exploration. One potential approach is to capture and use CO2 from the Martian atmosphere to generate the consumables and propellant fuels. Precision Combustion, Inc. (PCI), with support from NASA, continues to develop its regenerable adsorber technology for capturing CO2 from gaseous atmospheres (for cabin atmosphere revitalization and in-situ resource utilization applications) and its Sabatier reactor for converting CO2 to methane and water. Both technologies are based on PCI's Microlith(R) substrates and have been demonstrated to reduce size, weight, and power consumption during CO2 capture and methanation process. For adsorber applications, the Microlith substrates offer a unique resistive heating capability that shows potential for short regeneration time and reduced power requirements compared to conventional systems. For the Sabatier applications, the combination of the Microlith substrates and durable catalyst coating permits efficient CO2 methanation that favors high reactant conversion, high selectivity, and durability. Results from performance testing at various operating conditions will be presented. An effort to optimize the Sabatier reactor and to develop a bench-top Sabatier Development Unit (SDU) will be discussed.

  11. Method And Apparatus For Regenerating Nox Adsorbers

    DOEpatents

    Driscoll, J. Joshua; Endicott, Dennis L.; Faulkner, Stephen A.; Verkiel, Maarten

    2006-03-28

    Methods and apparatuses for regenerating a NOx adsorber coupled with an exhaust of an engine. An actuator drives a throttle valve to a first position when regeneration of the NOx adsorber is desired. The first position is a position that causes the regeneration of the NOx adsorber. An actuator drives the throttle valve to a second position while regeneration of the NOx adsorber is still desired. The second position being a position that is more open than the first position and operable to regenerate a NOx adsorber.

  12. Modeling of a thermally integrated 10 kWe planar solid oxide fuel cell system with anode offgas recycling and internal reforming by discretization in flow direction

    NASA Astrophysics Data System (ADS)

    Wahl, Stefanie; Segarra, Ana Gallet; Horstmann, Peter; Carré, Maxime; Bessler, Wolfgang G.; Lapicque, François; Friedrich, K. Andreas

    2015-04-01

    Combined heat and power production (CHP) based on solid oxide fuel cells (SOFC) is a very promising technology to achieve high electrical efficiency to cover power demand by decentralized production. This paper presents a dynamic quasi 2D model of an SOFC system which consists of stack and balance of plant and includes thermal coupling between the single components. The model is implemented in Modelica® and validated with experimental data for the stack UI-characteristic and the thermal behavior. The good agreement between experimental and simulation results demonstrates the validity of the model. Different operating conditions and system configurations are tested, increasing the net electrical efficiency to 57% by implementing an anode offgas recycle rate of 65%. A sensitivity analysis of characteristic values of the system like fuel utilization, oxygen-to-carbon ratio and electrical efficiency for different natural gas compositions is carried out. The result shows that a control strategy adapted to variable natural gas composition and its energy content should be developed in order to optimize the operation of the system.

  13. Integrated Recycling Test Fuel Fabrication

    SciTech Connect

    R.S. Fielding; K.H. Kim; B. Grover; J. Smith; J. King; K. Wendt; D. Chapman; L. Zirker

    2013-03-01

    The Integrated Recycling Test is a collaborative irradiation test that will electrochemically recycle used light water reactor fuel into metallic fuel feedstock. The feedstock will be fabricated into a metallic fast reactor type fuel that will be irradiation tested in a drop in capsule test in the Advanced Test Reactor on the Idaho National Laboratory site. This paper will summarize the fuel fabrication activities and design efforts. Casting development will include developing a casting process and system. The closure welding system will be based on the gas tungsten arc burst welding process. The settler/bonder system has been designed to be a simple system which provides heating and controllable impact energy to ensure wetting between the fuel and cladding. The final major pieces of equipment to be designed are the weld and sodium bond inspection system. Both x-radiography and ultrasonic inspection techniques have been examine experimentally and found to be feasible, however the final remote system has not been designed. Conceptual designs for radiography and an ultrasonic system have been made.

  14. Selective solid-phase extraction of alpha-tocopherol by functionalized ionic liquid-modified mesoporous SBA-15 adsorbent.

    PubMed

    Li, Min; Pham, Patrisha J; Pittman, Charles U; Li, Tingyu

    2008-10-01

    Ordered mesoporous adsorbents were prepared by physically grafting functionalized ionic liquids onto SBA-15 (a mesoporous siliceous substrate) using incipient wetness immersion method. These adsorbents were successfully applied to the selective extraction and separation of alpha-tocopherol (an isomer of vitamin E) from a model mixture of soybean oil deodorizer distillate. Various parameters affecting adsorption process such as adsorption time, the structures and loadings of ionic liquids, the adsorption isotherm, and the reusability of adsorbent were investigated using liquid-solid extraction. As high as 211 mg/g adsorbent of the adsorption capacity for alpha-tocopherol was obtained through the adsorption isotherm tests using [emim][Gly]/SBA-15 (functionalized ionic liquid 1-ethyl-3-methylimidazolium glycine which was physically coated on SBA-15) as the adsorbent, in which the functionalized ionic liquids contained the amino acid glycine as the anion. The adsorbent [emim][Gly]/SBA-15 also exhibited a very high adsorption selectivity for alpha-tocopherol. The extraction selectivity or the ratio of distribution coefficients between alpha-tocopherol and the major interference component glyceryl triundecanoate (K(d(alpha-tocopherol))/K(d(triglyceride))) was 10.5. The concentration of alpha-tocopherol was significantly increased from 15.6% in original feedstock solution that contained fatty acid methyl ester, triglyceride and alpha-tocopherol to 73.0% after stripping by diethyl ether. Five adsorbent recycle tests showed good reusability of the functionalized ionic liquid-modified mesoporous adsorbent. PMID:18845881

  15. New approaches for MOX multi-recycling

    SciTech Connect

    Gain, T.; Bouvier, E.; Grosman, R.; Senentz, G.H.; Lelievre, F.; Bailly, F.; Brueziere, J.; Murray, P.

    2013-07-01

    Due to its low fissile content after irradiation, Pu from used MOX fuel is considered by some as not recyclable in LWR (Light Water Reactors). The point of this paper is hence to go back to those statements and provide a new analysis based on AREVA extended experience in the fields of fissile and fertile material management and optimized waste management. This is done using the current US fuel inventory as a case study. MOX Multi-recycling in LWRs is a closed cycle scenario where U and Pu management through reprocessing and recycling leads to a significant reduction of the used assemblies to be stored. The recycling of Pu in MOX fuel is moreover a way to maintain the self-protection of the Pu-bearing assemblies. With this scenario, Pu content is also reduced repetitively via a multi-recycling of MOX in LWRs. Simultaneously, {sup 238}Pu content decreases. All along this scenario, HLW (High-Level Radioactive Waste) vitrified canisters are produced and planned for deep geological disposal. Contrary to used fuel, HLW vitrified canisters do not contain proliferation materials. Moreover, the reprocessing of used fuel limits the space needed on current interim storage. With MOX multi-recycling in LWR, Pu isotopy needs to be managed carefully all along the scenario. The early introduction of a limited number of SFRs (Sodium Fast Reactors) can therefore be a real asset for the overall system. A few SFRs would be enough to improve the Pu isotopy from used LWR MOX fuel and provide a Pu-isotopy that could be mixed back with multi-recycled Pu from LWRs, hence increasing the Pu multi-recycling potential in LWRs.

  16. Management of scrap computer recycling in Taiwan.

    PubMed

    Lee, C H; Chang, S L; Wang, K M; Wen, L C

    2000-04-28

    It is estimated that approximately 300,000 scrap personal computers are generated each year in Taiwan [S.-L. Chang, A Study on the Scrap Computer Treatment Cost, Environment Protection Administration of Taiwan, December 1998 (in Chinese)]. The disposal of such a huge number of scrap computers presents a difficult task for the island due to the scarcity of landfills and incineration facilities available locally. Also, the hazardous materials contained (i.e., phosphor coatings of cathode ray tubes (CRTs), batteries, polychlorinated biphenyl capacitors, mercury-containing parts, liquid crystal display, high-lead content CRT funnel glass, and plastic containing flame-retardant bromine, etc.) in the scrap computers may seriously pollute the environment if they are not properly disposed of. Therefore, the EPA of Taiwan declared scrap personal computers the producer's recycling responsibility as of July 1997. Under this decree, the manufacturers, importers and sellers of personal computers have to properly recover and recycle the scrapped computers which they originally sell. On June 1, 1998, a producer responsibility recycling program for scrap computers was officially implemented in Taiwan. Under this program, consumers can bring their unwanted personal computers to the designated collection points and receive reward money. Currently, only six computer items are mandated to be recycled in this recycling program. They are notebooks, monitors, hard disks, power supplies, printed circuit boards and main frame shells. This article outlines the current scrap computer recycling system in Taiwan.

  17. Nature, strength, and consequences of indirect adsorbate interactions on metals

    SciTech Connect

    BOGICEVIC,ALEXANDER; OVESSON,S.; HYLDGAARD,P.; LUNDQVIST,B.I.; JENNISON,DWIGHT R.

    2000-02-14

    Atoms and molecules adsorbed on metals affect each other even over considerable distances. In a tour-de-force of density-functional methods, the authors establish the nature and strength of such indirect interactions, and explain for what adsorbate systems they can critically affect important materials properties. These perceptions are verified in kinetic Monte Carlo simulations of epitaxial growth, and help rationalize a cascade of recent experimental reports on anomalously low diffusion prefactors. The authors focus their study on two metal systems: Al/Al(111) and Cu/Cu(111).

  18. Adsorbates in a Box: Titration of Substrate Electronic States

    NASA Astrophysics Data System (ADS)

    Cheng, Zhihai; Wyrick, Jonathan; Luo, Miaomiao; Sun, Dezheng; Kim, Daeho; Zhu, Yeming; Lu, Wenhao; Kim, Kwangmoo; Einstein, T. L.; Bartels, Ludwig

    2010-08-01

    Nanoscale confinement of adsorbed CO molecules in an anthraquinone network on Cu(111) with a pore size of ≈4nm arranges the CO molecules in a shell structure that coincides with the distribution of substrate confined electronic states. Molecules occupy the states approximately in the sequence of rising electron energy. Despite the sixfold symmetry of the pore boundary itself, the adsorbate distribution adopts the threefold symmetry of the network-substrate system, highlighting the importance of the substrate even for such quasi-free-electron systems.

  19. Experiment on the thermal conductivity and permeability of physical and chemical compound adsorbents for sorption process

    NASA Astrophysics Data System (ADS)

    Jin, Z. Q.; Wang, L. W.; Jiang, L.; Wang, R. Z.

    2013-08-01

    For the adsorbents in the application of refrigeration, the density of the material inside the adsorber changes because the adsorption/desorption of the refrigerant inside the adsorbents. Consequently the thermal conductivity and permeability of the adsorbents also change. In order to investigate the heat and mass transfer performance of consolidated compound adsorbent under the different equilibrium state of adsorption/desorption, the thermal conductivity and permeability test system is set up using the guarded hot plate measuring method and the principle of Ergun equation. Then various mass ratios between adsorbent and matrix of consolidated physical and chemical compound adsorbents are developed and tested under different ammonia adsorption quantity. Result shows that the thermal conductivity and permeability have strong dependence with the ratios and consolidated density of the compound adsorbent. Meanwhile, the thermal conductivity and permeability of the chemical compound adsorbents vary significantly with different adsorption quantity of ammonia, and the values for the physical compound adsorbents almost maintain a constant value with different values of adsorption quantity.

  20. An improved high intensity recycling helium-3 beam source

    SciTech Connect

    Hedgeland, H.; Kole, P. R.; Allison, W.; Ellis, J.; Jardine, A. P.

    2009-07-15

    We describe an improved high intensity, recycling, supersonic atomic beam source. Changes address several issues previously limiting performance and reliability of the apparatus, including the use of newly available vacuum pumps and modifications to the recycling system. We achieve a source intensity of 2.5x10{sup 19} atoms/s/sr, almost twice that previously achievable during recycling. Current limits on intensity are discussed.

  1. Recycling in a megacity.

    PubMed

    Themelis, Nickolas J; Todd, Claire E

    2004-04-01

    In the aftermath of the 9/11 disaster, Mayor Bloomberg of New York City unveiled an aggressive budget plan that included the temporary suspension of glass and plastics recycling. This was considered by many to be anti-environmental, but the results of this study show that for lack of markets, even at zero or negative prices, nearly 90% of the plastic and glass set aside by thoughtful New Yorkers was transported to materials recovery facilities (MRFs) and from there to landfills. Sending bales of plastics to landfills is not limited to New York City. It is an environmental paradox that the United States is digging up new oil fields in pristine areas and, at the same time, continues to convert greenfields to brownfields by burying nearly 20 million tons of plastic fuel annually. The study also determined that at the present rate of source separation, estimated to be less than 30% of the available recyclables in 1999, building large, modern MRFs may increase substantially the rate of New York City recycling and also allow single-stream collection of commingled recyclables, as is done in Phoenix, AZ. Single-stream collection simplifies separation at the source by citizens and increases the amount of collected recyclables. Also, because collection represents a large fraction of the costs of waste management, it may have a significant economic advantage.

  2. Recycling of Reinforced Plastics

    NASA Astrophysics Data System (ADS)

    Adams, R. D.; Collins, Andrew; Cooper, Duncan; Wingfield-Digby, Mark; Watts-Farmer, Archibald; Laurence, Anna; Patel, Kayur; Stevens, Mark; Watkins, Rhodri

    2014-02-01

    This work has shown is that it is possible to recycle continuous and short fibre reinforced thermosetting resins while keeping almost the whole of the original material, both fibres and matrix, within the recyclate. By splitting, crushing hot or cold, and hot forming, it is possible to create a recyclable material, which we designate a Remat, which can then be used to remanufacture other shapes, examples of plates and tubes being demonstrated. Not only can remanufacturing be done, but it has been shown that over 50 % of the original mechanical properties, such as the E modulus, tensile strength, and interlaminar shear strength, can be retained. Four different forms of composite were investigated, a random mat Glass Fibre Reinforced Plastic (GFRP) bathroom component and boat hull, woven glass and carbon fibre cloth impregnated with an epoxy resin, and unidirectional carbon fibre pre-preg. One of the main factors found to affect composite recyclability was the type of resin matrix used in the composite. Thermoset resins tested were shown to have a temperature range around the Glass Transition Temperature (Tg) where they exhibit ductile behaviour, hence aiding reforming of the material. The high-grade carbon fibre prepreg was found to be less easy to recycle than the woven of random fibre laminates. One method of remanufacturing was by heating the Remat to above its glass transition temperature, bending it to shape, and then cooling it. However, unless precautions are taken, the geometric form may revert. This does not happen with the crushed material.

  3. Selective removal of copper and lead ions by diethylenetriamine-functionalized adsorbent: behaviors and mechanisms.

    PubMed

    Liu, Changkun; Bai, Renbi; San Ly, Quan

    2008-03-01

    The selective removal of copper and lead ions from aqueous solutions by diethylenetriamine (DETA)-functionalized polymeric adsorbent was investigated. The adsorbent was prepared by amination of the micro-beads synthesized from glycidyl methacrylate and trimethylolpropane trimethacrylate co-polymerization (denoted as P-DETA). In the single metal species system (only copper or lead ions present), P-DETA was found to adsorb copper ions or lead ions significantly (with a slightly higher adsorption uptake capacity for lead ions than copper ions). However, P-DETA displayed an excellent selectivity in the adsorption of copper ions over lead ions in the binary metal species system (with both copper and lead ions present). It was also found that initially (or previously) adsorbed lead ions on P-DETA were displaced, even completely, by subsequently adsorbed copper ions from the solution but the case was not vice versa. The greater electronegativity of copper ions than lead ions was identified as the major factor that caused P-DETA to selectively adsorb copper ions over lead ions during competitive adsorption in the binary metal species system. It was speculated that the displacement of already adsorbed lead ions on P-DETA by subsequently adsorbed copper ions was through an adjacent attachment and repulsion mechanism. P-DETA has been shown to have the potential to be used as an effective adsorbent for the removal as well as selective recovery of heavy metal ions in water or wastewater treatment.

  4. Nitric oxide releasing material adsorbs more fibrinogen.

    PubMed

    Lantvit, Sarah M; Barrett, Brittany J; Reynolds, Melissa M

    2013-11-01

    One mechanism of the failure of blood-contacting devices is clotting. Nitric oxide (NO) releasing materials are seen as a viable solution to the mediation of surface clotting by preventing platelet activation; however, NO's involvement in preventing clot formation extends beyond controlling platelet function. In this study, we evaluate NO's effect on factor XII (fibrinogen) adsorption and activation, which causes the initiation of the intrinsic arm of the coagulation cascade. This is done by utilizing a model plasticized poly(vinyl) chloride (PVC), N-diazeniumdiolate system and looking at the adsorption of fibrinogen, an important clotting protein, to these surfaces. The materials have been prepared in such a way to eliminate changes in surface properties between the control (plasticized PVC) and composite (NO-releasing) materials. This allows us to isolate NO release and determine the effect on the adsorption of fibrinogen, to the material surface. Surprisingly, it was found that an NO releasing material with a surface flux of 17.4 ± 0.5 × 10(-10) mol NO cm(-2) min(-1) showed a significant increase in the amount of fibrinogen adsorbed to the material surface compared to one with a flux of 13.0 ± 1.6 × 10(-10) mol NO cm(-2) min(-1) and the control (2334 ± 496, 226 ± 99, and 103 ±31% fibrinogen adsorbed of control, respectively). This study suggests that NO's role in controlling clotting is extended beyond platelet activation. PMID:23554300

  5. Who owns the recyclables

    SciTech Connect

    Parker, B.

    1994-05-01

    On March 31, the California Supreme Court decided the much awaited Rancho Mirage'' case (Waste Management of the Desert, Inc., and the City of Rancho Mirage v. Palm Springs Recycling Center, Inc.), and held that the California Integrated Waste Management Act of 1989 does not allow an exclusive franchise for the collection of recyclables not discarded by their owner.'' This ends a three-year slugfest between secondary materials processors in the state and municipalities and their franchised garbage haulers who also collect and process recyclables as part of their exclusive arrangement. Central to this nationally-watched litigation is a most fundamental question in waste management: at what point in time do articles in the solid waste stream become actual or potentially valuable secondary materials

  6. Scrap tire recycling

    SciTech Connect

    Lula, J.W.; Bohnert, G.W.

    1997-03-01

    As the automobile tire technology has grown and met the need for safer and more durable tires, stronger reinforcement and more chemically resistant rubber compounds have made recycling tires more difficult. In an effort to resolve this problem, techniques and equipment were developed to grind tires into small pieces, and new markets were sought to utilize the crumb rubber product streams from ground tires. Industrial combustion processes were modified to accept scrap tires as fuel. These efforts have been beneficial, steadily increasing the percentage of scrap tires recycled to about 10% in 1985, and reaching 72% in 1995. By the end of 1997, fully 100% of tires generated in the U.S. are expected to be recycled.

  7. Recycle your plastic waste

    SciTech Connect

    Kuhlke, W.C. )

    1990-05-01

    This paper discusses how source reduction and recycling are alternatives to managing waste. This includes the recycling of material before it leaves the manufacturer or reducing the size of the product being made. In-plant reprocessing of plastic materials is one method of source reduction. Included are such applications as where an injection molder collects the spur, regrinds it, and feeds it back to make an injection molded part. When a polystyrene sheet is thermoformed to make cups, after cutting, the remaining sheet is recycled, chopped up and reextruded to make a sheet to again be fed to the thermoformer. The alternative would be to sell the waste or send it to the city dump.

  8. A novel aqueous micellar two-phase system composed of surfactant and sorbitol for purification of pectinase enzyme from Psidium guajava and recycling phase components.

    PubMed

    Amid, Mehrnoush; Murshid, Fara Syazana; Manap, Mohd Yazid; Hussin, Muhaini

    2015-01-01

    A novel aqueous two-phase system composed of a surfactant and sorbitol was employed for the first time to purify pectinase from Psidium guajava. The influences of different parameters, including the type and concentration of the surfactant and the concentration and composition of the surfactant/sorbitol ratio, on the partitioning behavior and recovery of pectinase were investigated. Moreover, the effects of system pH and the crude load on purification fold and the yield of purified pectinase were studied. The experimental results indicated that the pectinase was partitioned into surfactant-rich top phase, and the impurities were partitioned into the sorbitol-rich bottom phase with the novel method involving an ATPS composed of 26% (w/w) Triton X-100 and 23% (w/w) sorbitol at 54.2% of the TLL crude load of 20% (w/w) at pH 6.0. The enzyme was successfully recovered by this method with a high purification factor of 15.2 and a yield of 98.3%, whereas the phase components were also recovered and recycled at rates above 96%. This study demonstrated that this novel ATPS method can be used as an efficient and economical alternative to the traditional ATPS for the purification and recovery of the valuable enzyme. PMID:25756051

  9. A novel aqueous micellar two-phase system composed of surfactant and sorbitol for purification of pectinase enzyme from Psidium guajava and recycling phase components.

    PubMed

    Amid, Mehrnoush; Murshid, Fara Syazana; Manap, Mohd Yazid; Hussin, Muhaini

    2015-01-01

    A novel aqueous two-phase system composed of a surfactant and sorbitol was employed for the first time to purify pectinase from Psidium guajava. The influences of different parameters, including the type and concentration of the surfactant and the concentration and composition of the surfactant/sorbitol ratio, on the partitioning behavior and recovery of pectinase were investigated. Moreover, the effects of system pH and the crude load on purification fold and the yield of purified pectinase were studied. The experimental results indicated that the pectinase was partitioned into surfactant-rich top phase, and the impurities were partitioned into the sorbitol-rich bottom phase with the novel method involving an ATPS composed of 26% (w/w) Triton X-100 and 23% (w/w) sorbitol at 54.2% of the TLL crude load of 20% (w/w) at pH 6.0. The enzyme was successfully recovered by this method with a high purification factor of 15.2 and a yield of 98.3%, whereas the phase components were also recovered and recycled at rates above 96%. This study demonstrated that this novel ATPS method can be used as an efficient and economical alternative to the traditional ATPS for the purification and recovery of the valuable enzyme.

  10. A Novel Aqueous Micellar Two-Phase System Composed of Surfactant and Sorbitol for Purification of Pectinase Enzyme from Psidium guajava and Recycling Phase Components

    PubMed Central

    Murshid, Fara Syazana; Manap, Mohd Yazid; Hussin, Muhaini

    2015-01-01

    A novel aqueous two-phase system composed of a surfactant and sorbitol was employed for the first time to purify pectinase from Psidium guajava. The influences of different parameters, including the type and concentration of the surfactant and the concentration and composition of the surfactant/sorbitol ratio, on the partitioning behavior and recovery of pectinase were investigated. Moreover, the effects of system pH and the crude load on purification fold and the yield of purified pectinase were studied. The experimental results indicated that the pectinase was partitioned into surfactant-rich top phase, and the impurities were partitioned into the sorbitol-rich bottom phase with the novel method involving an ATPS composed of 26% (w/w) Triton X-100 and 23% (w/w) sorbitol at 54.2% of the TLL crude load of 20% (w/w) at pH 6.0. The enzyme was successfully recovered by this method with a high purification factor of 15.2 and a yield of 98.3%, whereas the phase components were also recovered and recycled at rates above 96%. This study demonstrated that this novel ATPS method can be used as an efficient and economical alternative to the traditional ATPS for the purification and recovery of the valuable enzyme. PMID:25756051

  11. Recycling and computerized garbage tracking cut city's costs

    SciTech Connect

    Norris, J.L. )

    1994-02-01

    This article describes Athens, Ohio efforts to encourage recycling and minimizing of landfilled garbage by a sliding rate system for garbage collection that accommodates the highly transient nature of this college community. Residential waste going to the landfill has been reduced by as much as 50 percent. Recycling is scheduled the same day as garbage collection. Recycling crews sort all items and package them for sale. Yard wastes are also recycled and are co-mingled with digested municipal sludge generated at the waste-water treatment plant and applied on agricultural fields as a soil conditioner.

  12. Recycle of battery components

    NASA Astrophysics Data System (ADS)

    Pemsler, J. P.; Spitz, R. A.

    The recycle disposal scenario for the batteries nickel/zinc, nickel/iron, zinc/chlorine, zinc/bromine, sodium/sulfur and lithium-aluminum/metal sulfide was considered. Flowsheets are presented which include disassembly, materials handling, melting or solubization, liquid/solid separations, purifications and waste handling. Material and energy balances are provided for all major streams and capital and operating costs for typical plant sizes are presented. Recycle is a a viable option in all cases. Recommendations are made for the best process options and for additional studies on the sodium/sulfur and lithium-aluminum/metal sulfide batteries.

  13. DWPF RECYCLE EVAPORATOR FLOWSHEET EVALUATION (U)

    SciTech Connect

    Stone, M

    2005-04-30

    The Defense Waste Processing Facility (DWPF) converts the high level waste slurries stored at the Savannah River Site into borosilicate glass for long-term storage. The vitrification process results in the generation of approximately five gallons of dilute recycle streams for each gallon of waste slurry vitrified. This dilute recycle stream is currently transferred to the H-area Tank Farm and amounts to approximately 1,400,000 gallons of effluent per year. Process changes to incorporate salt waste could increase the amount of effluent to approximately 2,900,000 gallons per year. The recycle consists of two major streams and four smaller streams. The first major recycle stream is condensate from the Chemical Process Cell (CPC), and is collected in the Slurry Mix Evaporator Condensate Tank (SMECT). The second major recycle stream is the melter offgas which is collected in the Off Gas Condensate Tank (OGCT). The four smaller streams are the sample flushes, sump flushes, decon solution, and High Efficiency Mist Eliminator (HEME) dissolution solution. These streams are collected in the Decontamination Waste Treatment Tank (DWTT) or the Recycle Collection Tank (RCT). All recycle streams are currently combined in the RCT and treated with sodium nitrite and sodium hydroxide prior to transfer to the tank farm. Tank Farm space limitations and previous outages in the 2H Evaporator system due to deposition of sodium alumino-silicates have led to evaluation of alternative methods of dealing with the DWPF recycle. One option identified for processing the recycle was a dedicated evaporator to concentrate the recycle stream to allow the solids to be recycled to the DWPF Sludge Receipt and Adjustment Tank (SRAT) and the condensate from this evaporation process to be sent and treated in the Effluent Treatment Plant (ETP). In order to meet process objectives, the recycle stream must be concentrated to 1/30th of the feed volume during the evaporation process. The concentrated stream

  14. [Phase transfer catalyzed bioconversion of penicillin G to 6-APA by immobilized penicillin acylase in recyclable aqueous two-phase systems with light/pH sensitive copolymers].

    PubMed

    Jin, Ke-ming; Cao, Xue-jun; Su, Jin; Ma, Li; Zhuang, Ying-ping; Chu, Ju; Zhang, Si-liang

    2008-03-01

    Immobilized penicillin acylase was used for bioconversion of penicillin PG into 6-APA in aqueous two-phase systems consisting of a light-sensitive polymer PNBC and a pH-sensitive polymer PADB. Partition coefficients of 6-APA was found to be about 5.78 in the presence of 1% NaCl. Enzyme kinetics showed that the reaction reached equilibrium at roughly 7 h. The 6-APA mole yields were 85.3% (pH 7.8, 20 degrees C), with about 20% increment as compared with the reaction of single aqueous phase buffer. The partition coefficient of PG (Na) varied scarcely, while that of the product, 6-APA and phenylacetic acid (PA) significantly varied due to Donnan effect of the phase systems and hydrophobicity of the products. The variation of the partition coefficients of the products also affected the bioconversion yield of the products. In the aqueous two-phase systems, the substrate, PG, the products of 6-APA and PA were biased in the top phase, while immobilized penicillin acylase at completely partitioned at the bottom. The substrate and PG entered the bottom phase, where it was catalyzed into 6-APA and PA and entered the top phase. Inhibition of the substrate and products was removed to result in improvement of the product yield, and the immobilized enzyme showed higher efficiency than the immobilized cells and occupied smaller volume. Compared with the free enzyme, immobilized enzyme had greater stability, longer life-time, and was completely partitioned in the bottom phase and recycle. Bioconversion in two-phase systems using immobilized penicillin acylase showed outstanding advantage. The light-sensitive copolymer forming aqueous two-phase systems could be recovered by laser radiation at 488 nm or filtered 450 nm light, while pH-sensitive polymer PADB could be recovered at the isoelectric point (pH 4.1). The recovery of the two copolymers was between 95% and 99%.

  15. Adsorption of Magnesium Sulfate from Desulfurization Industrial Wastewater by Nano-Cerium Loaded Recycled Aggregates.

    PubMed

    Yoon, Hyung-Sun; Bak, Somi; Seo, Seong-Gyu; Choi, Jeongdong; Kim, Eun-Sik

    2016-02-01

    In this research, the recycled aggregates (RAs) from blast furnace were solidified with nano-cerium (Ce), and applied to reduce the ionic species (e.g., magnesium sulfate) in the desulfurization industrial wastewater. Static batch experiments were performed based on different loading of recycled aggregates. Sulfate sorption isotherm studies were performed by Langmuir adsorption model. The physical morphologies were determined using scanning electron microscope. The results presented that the partial ions were captured with the different loading of the recycled aggregates during the batch tests. It was observed that 8 hr batch reaction equilibrated the electrical conductivity reduction, and 13% mass loading was estimated an optimal dosage of adsorbent. This study showed the nano-Ce loaded RAs could reduce ionic species in wastewater, and expected to be an economical adsorbent for wastewater treatment process.

  16. Adsorption of Magnesium Sulfate from Desulfurization Industrial Wastewater by Nano-Cerium Loaded Recycled Aggregates.

    PubMed

    Yoon, Hyung-Sun; Bak, Somi; Seo, Seong-Gyu; Choi, Jeongdong; Kim, Eun-Sik

    2016-02-01

    In this research, the recycled aggregates (RAs) from blast furnace were solidified with nano-cerium (Ce), and applied to reduce the ionic species (e.g., magnesium sulfate) in the desulfurization industrial wastewater. Static batch experiments were performed based on different loading of recycled aggregates. Sulfate sorption isotherm studies were performed by Langmuir adsorption model. The physical morphologies were determined using scanning electron microscope. The results presented that the partial ions were captured with the different loading of the recycled aggregates during the batch tests. It was observed that 8 hr batch reaction equilibrated the electrical conductivity reduction, and 13% mass loading was estimated an optimal dosage of adsorbent. This study showed the nano-Ce loaded RAs could reduce ionic species in wastewater, and expected to be an economical adsorbent for wastewater treatment process. PMID:27433701

  17. Theoretical framework for the interpretation of STM images of adsorbates.

    PubMed

    Kenkre, V M; Biscarini, F; Bustamante, C

    1992-07-01

    A theoretical formalism for the interpretation of STM images of adsorbates is developed by approaching the calculation of the observed current as a transport problem in quantum statistical mechanics. The STM configuration is treated as a system of three groups of states--the substrate, the adsorbate and the tip--in contact with a thermal reservoir, with which it exchanges energy. A new definition of current is introduced, and shown to be related to that given in the traditional transfer Hamiltonian approach. The transport instrument used for the description is the stochastic Liouville equation, known to have the advantage of allowing the incorporation of thermal effects as well as arbitrary degree of coherence in the quantum transport. Some preliminary calculations of STM images of simple adsorbate models are presented.

  18. Adsorption of lead ions on composite biopolymer adsorbent

    SciTech Connect

    Seki, Hideshi; Suzuki, Akira

    1996-04-01

    A fundamental study about the application of biopolymers to the recovery of lead from dilute solution was carried out. A membranous composite biopolymer adsorbent containing two kind of biopolymers, alginic acid (AA) and humic acid (HA), was prepared. HA, which has high solubility in water, was almost completely immobilized in the adsorbent by a combination of calcium alginate gel and activated carbon powder. A general model for complexation between divalent metal ions and acidic sites on biopolymers was applied to explain the adsorption mechanism of lead on the adsorbent (HA-M). The results showed that the complexation constants and the complexation capacities of lead-AA and lead-HA systems were scarcely influenced by immobilization.

  19. Enhanced Control of PWR Primary Coolant Water Chemistry Using Selective Separation Systems for Recovery and Recycle of Enriched Boric Acid

    SciTech Connect

    Ken Czerwinski; Charels Yeamans; Don Olander; Kenneth Raymond; Norman Schroeder; Thomas Robison; Bryan Carlson; Barbara Smit; Pat Robinson

    2006-02-28

    The objective of this project is to develop systems that will allow for increased nuclear energy production through the use of enriched fuels. The developed systems will allow for the efficient and selective recover of selected isotopes that are additives to power water reactors' primary coolant chemistry for suppression of corrosion attack on reactor materials.

  20. Recycling Decisions and Green Design.

    ERIC Educational Resources Information Center

    Lave, Lester B.; And Others

    1994-01-01

    Explores the facts and perceptions regarding recycling, what can be done to make products more environmentally compatible, and how to think about recycling decisions in a more helpful way. (Contains 39 references.) (MDH)

  1. A novel fiber-based adsorbent technology

    SciTech Connect

    Reynolds, T.A.

    1997-10-01

    In this Phase I Small Business Innovation Research program, Chemica Technologies, Inc. is developing an economical, robust, fiber-based adsorbent technology for removal of heavy metals from contaminated water. The key innovation is the development of regenerable adsorbent fibers and adsorbent fiber cloths that have high capacity and selectivity for heavy metals and are chemically robust. The process has the potential for widespread use at DOE facilities, mining operations, and the chemical process industry.

  2. Building recycling rates through the informal sector

    SciTech Connect

    Wilson, David C.; Araba, Adebisi O.; Chinwah, Kaine; Cheeseman, Christopher R.

    2009-02-15

    Many developing country cities aspire to modern waste management systems, which are associated with relatively high recycling rates of clean, source separated materials. Most already have informal sector recycling systems, which are driven solely by the revenues derived from selling recovered materials, even though they are saving the formal sector money by reducing waste quantities. There is clear potential for 'win-win' co-operation between the formal and informal sectors, as providing support to the informal sector, to build recycling rates and to address some of the social issues could reduce the overall costs of waste management for the formal sector. This paper shows that recycling rates already achieved by the informal sector can be quite high, typically in the range from 20% to 50%; often up to half of this is in the form of clean, source separated materials collected directly from households and businesses by itinerant waste buyers. Four country case studies provide a number of lessons on how this solid foundation could be used to build high recycling rates of clean materials.

  3. Building recycling rates through the informal sector.

    PubMed

    Wilson, David C; Araba, Adebisi O; Chinwah, Kaine; Cheeseman, Christopher R

    2009-02-01

    Many developing country cities aspire to modern waste management systems, which are associated with relatively high recycling rates of clean, source separated materials. Most already have informal sector recycling systems, which are driven solely by the revenues derived from selling recovered materials, even though they are saving the formal sector money by reducing waste quantities. There is clear potential for 'win-win' co-operation between the formal and informal sectors, as providing support to the informal sector, to build recycling rates and to address some of the social issues could reduce the overall costs of waste management for the formal sector. This paper shows that recycling rates already achieved by the informal sector can be quite high, typically in the range from 20% to 50%; often up to half of this is in the form of clean, source separated materials collected directly from households and businesses by itinerant waste buyers. Four country case studies provide a number of lessons on how this solid foundation could be used to build high recycling rates of clean materials. PMID:18701272

  4. An enhanced chemiluminescence resonance energy transfer system based on target recycling G-guadruplexes/hemin DNAzyme catalysis and its application in ultrasensitive detection of DNA.

    PubMed

    Chen, Jia; Huang, Yong; Vdovenko, Marina; Sakharov, Ivan Yu; Su, Guifa; Zhao, Shulin

    2015-06-01

    An enhanced chemiluminescence resonance energy transfer (CRET) system based on target recycling G-guadruplexes/hemin DNAzyme catalysis was developed for ultrasensitive detection of DNA. CRET system consists of luminol as chemiluminescent donor, and fluorescein isothiocyanate (FITC) as acceptor. The sensitive detection was achieved by using the system consisted of G-riched DNA, blocker DNA, and the Nb.BbvCI biocatalyst. Upon addition of target DNA to the system, target DNA hybridizes with the quasi-circular DNA structure, and forms a DNA duplex. The formation of DNA duplex triggers selective enzymatic cleavage of quasi-circular DNA by Nb.BbvCI, resulting in the release of target DNA and two G-riched DNAzyme segments. Released target DNA then hybridizes with another quasi-circular DNA structure to initiate the cleavage of the quasi-circular DNA structure. Eventually, each target DNA can go through many cycles, resulting in the digestion of many quasi-circular DNA structures, generating many G-riched DNAzyme segments. G-riched DNAzyme segment products assemble with hemin to form stable hemin/G-quadruplexes that exhibit peroxidase-like activity which can catalyze the oxidation of luminol by H2O2 to produce CL signals. In the presence of FITC, CL of luminol can excite FITC molecules, and thus produced CRET between the luminol and FITC. This unique analysis strategy gives a detection limit down to 80 fM, which is at least four orders of magnitude lower than that of unamplified DNA detection methods.

  5. Flows of engineered nanomaterials through the recycling process in Switzerland

    SciTech Connect

    Caballero-Guzman, Alejandro; Sun, Tianyin; Nowack, Bernd

    2015-02-15

    Highlights: • Recycling is one of the likely end-of-life fates of nanoproducts. • We assessed the material flows of four nanomaterials in the Swiss recycling system. • After recycling, most nanomaterials will flow to landfills or incineration plants. • Recycled construction waste, plastics and textiles may contain nanomaterials. - Abstract: The use of engineered nanomaterials (ENMs) in diverse applications has increased during the last years and this will likely continue in the near future. As the number of applications increase, more and more waste with nanomaterials will be generated. A portion of this waste will enter the recycling system, for example, in electronic products, textiles and construction materials. The fate of these materials during and after the waste management and recycling operations is poorly understood. The aim of this work is to model the flows of nano-TiO{sub 2}, nano-ZnO, nano-Ag and CNT in the recycling system in Switzerland. The basis for this study is published information on the ENMs flows on the Swiss system. We developed a method to assess their flow after recycling. To incorporate the uncertainties inherent to the limited information available, we applied a probabilistic material flow analysis approach. The results show that the recycling processes does not result in significant further propagation of nanomaterials into new products. Instead, the largest proportion will flow as waste that can subsequently be properly handled in incineration plants or landfills. Smaller fractions of ENMs will be eliminated or end up in materials that are sent abroad to undergo further recovery processes. Only a reduced amount of ENMs will flow back to the productive process of the economy in a limited number of sectors. Overall, the results suggest that risk assessment during recycling should focus on occupational exposure, release of ENMs in landfills and incineration plants, and toxicity assessment in a small number of recycled inputs.

  6. Quasiparticle excitations of adsorbates on doped graphene

    NASA Astrophysics Data System (ADS)

    Lischner, Johannes; Wickenburg, Sebastian; Wong, Dillon; Karrasch, Christoph; Wang, Yang; Lu, Jiong; Omrani, Arash A.; Brar, Victor; Tsai, Hsin-Zon; Wu, Qiong; Corsetti, Fabiano; Mostofi, Arash; Kawakami, Roland K.; Moore, Joel; Zettl, Alex; Louie, Steven G.; Crommie, Mike

    Adsorbed atoms and molecules can modify the electronic structure of graphene, but in turn it is also possible to control the properties of adsorbates via the graphene substrate. In my talk, I will discuss the electronic structure of F4-TCNQ molecules on doped graphene and present a first-principles based theory of quasiparticle excitations that captures the interplay of doping-dependent image charge interactions between substrate and adsorbate and electron-electron interaction effects on the molecule. The resulting doping-dependent quasiparticle energies will be compared to experimental scanning tunnelling spectra. Finally, I will also discuss the effects of charged adsorbates on the electronic structure of doped graphene.

  7. The Recycle Team.

    ERIC Educational Resources Information Center

    Scott, Roger; And Others

    This guide provides lessons that enable students to learn how important it is for each of us to take care of the environment by minimizing the problems caused by too much trash. In the 10 lessons included here, students and their families learn how they can be part of the solution by practicing source reduction and by reusing, recycling, and…

  8. Recycling Study Guide.

    ERIC Educational Resources Information Center

    Hallowell, Anne; And Others

    This study guide was designed to help teachers and students understand the problems surrounding solid wastes. It includes an overview of solid waste and recycling, a glossary, suggested activities and a list of resource publications, audiovisual materials and organizations. There are 19 activity suggestions included in this guide designed for use…

  9. Recycled Insect Models

    ERIC Educational Resources Information Center

    Rule, Audrey C.; Meyer, Mary Ann

    2007-01-01

    This article presents an engaging activity in which high school students use a dichotomous key to guide the creation and classification of model insects from recycled plastic lids and containers. Besides teaching the use of a dichotomous key and the effect of evolutionary descent upon groupings of organisms, this activity focuses on an…

  10. Deep Recycling of Carbon

    NASA Astrophysics Data System (ADS)

    Schmidt, M. W.

    2012-12-01

    While most of the subducted H2O is recycled at shallow and subarc depths, carbon is less readily mobilized and susceptive to complex redox processes involving CO2 in solids, fluids and melts, elemental carbon, Fe- and Si- carbides, and methane. Here I review the various ways of recycling carbon during subduction and present a spectrum of possible reaction products in the mantle. Metamorphic reactions liberate <20% of the subducted CO2 to the subarc region (Connolly 2005, EPSL). Larger amounts might be mobilized through (sediment) melting. Although the wet pelite solidus is only shifted by 30-50 oC (at 3 GPa) with carbonates, the latter remain stable with melts that are saturated in a H2O+CO2-fluid. Complete dissolution of carbonates requires temperatures above any predicted subduction geotherm. Carbonated sediments yield CO2-rich phonolites to 5 GPa but carbonatites at higher pressures. The silicate melts become increasingly potassic with pressure, while the alkali-rich carbonatites have their highest K/Na at 8 GPa, slightly decreasing to 13 GPa and become sodic with the disappearance of residual cpx at ~16 GPa. What may happen when carbonated pelite derived melts migrate into the mantle is illustrated in Central Italy: in this case, it can be experimentally demonstrated that hybridization of ultrapotassic phonolitic melts with ~2 wt% H2O and ~6 wt% CO2 in the mantle results in the primitive parents of the ultrapotassic kamafugite suites which have ~43 wt% SiO2. Hence, despite a crustal isotopic signature of C, O, and Sr in these rocks, the CO2 of the Italian magmatism does not stem from assimilation in the crust but from melts derived from subducted marine carbonates mixed with pelagic clays and then reacted in the mantle. The migration of CO2-bearing fluids and melts into the mantle may lead to a redox-shock. Where high liquid/mantle ratios prevail, carbonatites rest in their oxidized form and may only freeze in relatively cold lithospheric keels where they form

  11. Entropy, recycling and macroeconomics of water resources

    NASA Astrophysics Data System (ADS)

    Karakatsanis, Georgios; Mamassis, Nikos; Koutsoyiannis, Demetris

    2014-05-01

    We propose a macroeconomic model for water quantity and quality supply multipliers derived by water recycling (Karakatsanis et al. 2013). Macroeconomic models that incorporate natural resource conservation have become increasingly important (European Commission et al. 2012). In addition, as an estimated 80% of globally used freshwater is not reused (United Nations 2012), under increasing population trends, water recycling becomes a solution of high priority. Recycling of water resources creates two major conservation effects: (1) conservation of water in reservoirs and aquifers and (2) conservation of ecosystem carrying capacity due to wastewater flux reduction. Statistical distribution properties of the recycling efficiencies -on both water quantity and quality- for each sector are of vital economic importance. Uncertainty and complexity of water reuse in sectors are statistically quantified by entropy. High entropy of recycling efficiency values signifies greater efficiency dispersion; which -in turn- may indicate the need for additional infrastructure for the statistical distribution's both shifting and concentration towards higher efficiencies that lead to higher supply multipliers. Keywords: Entropy, water recycling, water supply multipliers, conservation, recycling efficiencies, macroeconomics References 1. European Commission (EC), Food and Agriculture Organization (FAO), International Monetary Fund (IMF), Organization of Economic Cooperation and Development (OECD), United Nations (UN) and World Bank (2012), System of Environmental and Economic Accounting (SEEA) Central Framework (White cover publication), United Nations Statistics Division 2. Karakatsanis, G., N. Mamassis, D. Koutsoyiannis and A. Efstratiades (2013), Entropy and reliability of water use via a statistical approach of scarcity, 5th EGU Leonardo Conference - Hydrofractals 2013 - STAHY '13, Kos Island, Greece, European Geosciences Union, International Association of Hydrological Sciences

  12. Isomerization reactions on single adsorbed molecules.

    PubMed

    Morgenstern, Karina

    2009-02-17

    Molecular switches occur throughout nature. In one prominent example, light induces the isomerization of retinal from the compact 11-cis form to the elongated all-trans form, a conversion that triggers the transformation of light into a neural impulse in the eye. Applying these natural principles to synthetic systems offers a promising way to construct smaller and faster nanoelectronic devices. In such systems, electronic switches are essential components for storage and logical operations. The development of molecular switches on the single-molecule level would represent a major step toward incorporating molecules as building units into nanoelectronic circuits. Molecular switches must be both reversible and bistable. To meet these requirements, a molecule must have at least two different thermally stable forms and a way to repeatedly interconvert between those forms based on changes in light, heat, pressure, magnetic or electric fields, pH, mechanical forces, or electric currents. The conversion should be connected to a measurable change in electronic, optical, magnetic, or mechanical properties. Because isomers can differ significantly in physical and chemical properties, isomerization could serve as a molecular switching mechanism. Integration of molecular switches into larger circuits will probably require arranging them on surfaces, which will require a better understanding of isomerization reactions in these environments. In this Account, we describe our scanning tunneling microscopy studies of the isomerization of individual molecules adsorbed on metal surfaces. Investigating chlorobenzene and azobenzene derivatives on the fcc(111) faces of Ag, Cu, and Au, we explored the influence of substituents and the substrate on the excitation mechanism of the isomerization reaction induced by inelastically tunneling electrons. We achieved an irreversible configurational (cis-trans) isomerization of individual 4-dimethyl-amino-azobenzene-4-sulfonic acid molecules on Au

  13. Recycling Behavior: A Multidimensional Approach

    ERIC Educational Resources Information Center

    Meneses, Gonzalo Diaz; Palacio, Asuncion Beerli

    2005-01-01

    This work centers on the study of consumer recycling roles to examine the sociodemographic and psychographic profile of the distribution of recycling tasks and roles within the household. With this aim in mind, an empirical work was carried out, the results of which suggest that recycling behavior is multidimensional and comprises the undertaking…

  14. Effect of recycle-to-influent ratio on activities of nitrifiers and denitrifiers in a combined UASB-activated sludge reactor system.

    PubMed

    Huang, Ju-Sheng; Chou, Hsin-Hsien; Chen, Chih-Ming; Chiang, Chun-Mao

    2007-06-01

    A laboratory study using a combined upflow anaerobic sludge bed (UASB)-activated sludge (AS) reactor system was undertaken to explore the effect of recycle-to-influent ratio (R(e)=1, 2, and 3) on the activities of nitrifiers and denitrifiers. Suspended-solids pre-settled piggery wastewater was used as the substrate-feed wastewater. At the R(e) of 1-3, the combined reactor system achieved efficient removal of COD (96-97%), TKN (100%) and total nitrogen TN (54-77%). Methanogenesis occurred with nearly-complete denitrification in the UASB reactor, whereas complete nitrification took place in the AS reactor. A higher R(e) (i.e., accompanied with a shorter solids retention time) resulted in a larger amount of high-activity denitrifiers and thereby achieved a higher TN removal efficiency. Compact granules and a high biomass concentration in the UASB reactor were observed. At the R(e) of 1-3, the maximum specific reaction rate of nitrifiers (0.45-0.49 NH(4)(+)-NmgVSS(-1)d(-1)) and the specific nitrification rates of mixed culture (0.18-0.22mg NH(4)(+)-NmgVSS(-1)d(-1)) in the AS reactor varied slightly; whereas the maximum specific reaction rate of denitrifiers (0.18-0.27mg NO(x)(-)-NmgVSS(-1)d(-1)) and the specific denitrification and COD removal rates of mixed culture (0.025-0.050mg NO(x)(-)-NmgVSS(-1)d(-1); 0.24-0.31mgCODmgVSS(-1)d(-1)) in the UASB reactor increased with increasing R(e). The primary finding of the study is that the combined UASB-AS reactor system should be operated at a higher R(e) to maintain high-activity denitrifiers to remove organic materials and nitrogen from piggery wastewater.

  15. A tale of five cities: Using recycling frameworks to analyse inclusive recycling performance.

    PubMed

    Scheinberg, Anne; Simpson, Michael

    2015-11-01

    'Recycling' is a source of much confusion, particularly when comparing solid waste systems in high-income countries with those in low- and middle-income countries. Few analysts can explain why the performance and structure of recycling appears to be so different in rich countries from poor ones, nor why well-meaning efforts to implement recycling so often fail. The analysis of policy drivers, and the Integrated Sustainable Waste Management (ISWM) framework, come close to an explanation.This article builds on these earlier works, focusing in on five cities profiled in the 2010 UN-Habitat publication (Scheinberg A, Wilson DC and Rodic L (2010) Solid Waste Management in the World's Cities. UN-Habitat's Third Global Report on the State of Water and Sanitation in the World's Cities. Newcastle-on-Tyne, UK: Earthscan Publications). Data from these cities and others provides the basis for developing a new tool to analyse inclusive recycling performance. The points of departure are the institutional and economic relationships between the service chain, the public obligation to remove waste, pollution, and other forms of disvalue, and the value chain, a system of private enterprises trading valuable materials and providing markets for recyclables. The methodological innovation is to use flows of materials and money as indicators of institutional relationships, and is an extension of process flow diagramming.The authors are using the term 'recycling framework analysis' to describe this new form of institutional analysis. The diagrams increase our understanding of the factors that contribute to high-performance inclusive recycling. By focusing on institutional relationships, the article seeks to improve analysis, planning, and ultimately, outcomes, of recycling interventions.

  16. Experimental characterization of adsorbed protein orientation, conformation, and bioactivity

    PubMed Central

    Thyparambil, Aby A.; Wei, Yang; Latour, Robert A.

    2015-01-01

    Protein adsorption on material surfaces is a common phenomenon that is of critical importance in many biotechnological applications. The structure and function of adsorbed proteins are tightly interrelated and play a key role in the communication and interaction of the adsorbed proteins with the surrounding environment. Because the bioactive state of a protein on a surface is a function of the orientation, conformation, and accessibility of its bioactive site(s), the isolated determination of just one or two of these factors will typically not be sufficient to understand the structure–function relationships of the adsorbed layer. Rather a combination of methods is needed to address each of these factors in a synergistic manner to provide a complementary dataset to characterize and understand the bioactive state of adsorbed protein. Over the past several years, the authors have focused on the development of such a set of complementary methods to address this need. These methods include adsorbed-state circular dichroism spectropolarimetry to determine adsorption-induced changes in protein secondary structure, amino-acid labeling/mass spectrometry to assess adsorbed protein orientation and tertiary structure by monitoring adsorption-induced changes in residue solvent accessibility, and bioactivity assays to assess adsorption-induced changes in protein bioactivity. In this paper, the authors describe the methods that they have developed and/or adapted for each of these assays. The authors then provide an example of their application to characterize how adsorption-induced changes in protein structure influence the enzymatic activity of hen egg-white lysozyme on fused silica glass, high density polyethylene, and poly(methyl-methacrylate) as a set of model systems. PMID:25708632

  17. A new adsorbent for boron removal from aqueous solutions.

    PubMed

    Kluczka, Joanna; Korolewicz, Teofil; Zołotajkin, Maria; Simka, Wojciech; Raczek, Malwina

    2013-01-01

    A new adsorbent based on natural clinoptilolite and amorphous zirconium dioxide (ZrO2) was prepared for the uptake of boron from fresh water. The sorption behaviour of this adsorbent for boron was investigated using a batch system and found to obey Langmuir, Freundlich and Dubinin-Radushkevich (D-R) isotherm models. The ZrO2 loading level, pH, temperature, contact time, initial boron concentration and adsorbent dose, on the removal of boron were studied. It was found that the removal of boron increased while the adsorbent dose increased and the temperature decreased at an optimum pH (pH = 8) and a contact time of 30 min. At optimum conditions, the maximum boron percentage removal was 75%. According to the D-R model, the maximum capacity was estimated to be > 3 mg B/g of the adsorbent. The adsorption energy value (calculated as 9.13 kJ/mol) indicated that the adsorption of boron on clinoptilolite modified with ZrO2 was physical in nature. The parameters of the adsorption models and the pH investigations pointed to the possibility of a chemisorption process. The thermodynamic parameters (standard entropy deltaS degrees, enthalpy deltaH degrees , and free energy deltaG degrees changes) of boron adsorption were also calculated. The negative value of deltaS degrees indicated a decreased randomness at the solid-solution interface during the boron adsorption. Negative values of deltaH degrees showed the exothermic nature of the process. The negative values of deltaG degrees implied that the adsorption of boron on clinoptilolite modified with amorphous ZrO2 at 25 degrees C was spontaneous. It was considered that boron dissolved in water had been adsorbed both physically and chemically on clinoptilolite modified with 30% ZrO2.

  18. Experimental characterization of adsorbed protein orientation, conformation, and bioactivity.

    PubMed

    Thyparambil, Aby A; Wei, Yang; Latour, Robert A

    2015-01-01

    Protein adsorption on material surfaces is a common phenomenon that is of critical importance in many biotechnological applications. The structure and function of adsorbed proteins are tightly interrelated and play a key role in the communication and interaction of the adsorbed proteins with the surrounding environment. Because the bioactive state of a protein on a surface is a function of the orientation, conformation, and accessibility of its bioactive site(s), the isolated determination of just one or two of these factors will typically not be sufficient to understand the structure-function relationships of the adsorbed layer. Rather a combination of methods is needed to address each of these factors in a synergistic manner to provide a complementary dataset to characterize and understand the bioactive state of adsorbed protein. Over the past several years, the authors have focused on the development of such a set of complementary methods to address this need. These methods include adsorbed-state circular dichroism spectropolarimetry to determine adsorption-induced changes in protein secondary structure, amino-acid labeling/mass spectrometry to assess adsorbed protein orientation and tertiary structure by monitoring adsorption-induced changes in residue solvent accessibility, and bioactivity assays to assess adsorption-induced changes in protein bioactivity. In this paper, the authors describe the methods that they have developed and/or adapted for each of these assays. The authors then provide an example of their application to characterize how adsorption-induced changes in protein structure influence the enzymatic activity of hen egg-white lysozyme on fused silica glass, high density polyethylene, and poly(methyl-methacrylate) as a set of model systems. PMID:25708632

  19. A new adsorbent for boron removal from aqueous solutions.

    PubMed

    Kluczka, Joanna; Korolewicz, Teofil; Zołotajkin, Maria; Simka, Wojciech; Raczek, Malwina

    2013-01-01

    A new adsorbent based on natural clinoptilolite and amorphous zirconium dioxide (ZrO2) was prepared for the uptake of boron from fresh water. The sorption behaviour of this adsorbent for boron was investigated using a batch system and found to obey Langmuir, Freundlich and Dubinin-Radushkevich (D-R) isotherm models. The ZrO2 loading level, pH, temperature, contact time, initial boron concentration and adsorbent dose, on the removal of boron were studied. It was found that the removal of boron increased while the adsorbent dose increased and the temperature decreased at an optimum pH (pH = 8) and a contact time of 30 min. At optimum conditions, the maximum boron percentage removal was 75%. According to the D-R model, the maximum capacity was estimated to be > 3 mg B/g of the adsorbent. The adsorption energy value (calculated as 9.13 kJ/mol) indicated that the adsorption of boron on clinoptilolite modified with ZrO2 was physical in nature. The parameters of the adsorption models and the pH investigations pointed to the possibility of a chemisorption process. The thermodynamic parameters (standard entropy deltaS degrees, enthalpy deltaH degrees , and free energy deltaG degrees changes) of boron adsorption were also calculated. The negative value of deltaS degrees indicated a decreased randomness at the solid-solution interface during the boron adsorption. Negative values of deltaH degrees showed the exothermic nature of the process. The negative values of deltaG degrees implied that the adsorption of boron on clinoptilolite modified with amorphous ZrO2 at 25 degrees C was spontaneous. It was considered that boron dissolved in water had been adsorbed both physically and chemically on clinoptilolite modified with 30% ZrO2. PMID:24191469

  20. Complete braided adsorbent for marine testing to demonstrate 3g-U/kg-adsorbent

    SciTech Connect

    Janke, Chris; Yatsandra, Oyola; Mayes, Richard; none,; Gill, Gary; Li-Jung, Kuo; Wood, Jordana; Sadananda, Das

    2014-04-30

    ORNL has manufactured four braided adsorbents that successfully demonstrated uranium adsorption capacities ranging from 3.0-3.6 g-U/kg-adsorbent in marine testing at PNNL. Four new braided and leno woven fabric adsorbents have also been prepared by ORNL and are currently undergoing marine testing at PNNL.

  1. Redefining recycling: Everything is a product

    SciTech Connect

    Quinn, B.

    1995-10-01

    Texas-based Chaparral Steel has redefined recycling, not only in its environmental responses, but in the managerial direction of the company itself. Through Project STAR (Systems and Technology for Advanced Recycling), Chaparral has reduced its resources consumption, enhanced its by-products value and reduced waste in areas ranging from mill scale and solvents to water and energy. Chaparral represents an industry rooted in recycling. Steel is the world`s most recycled material, and electric-arc furnace (EAF) steelmakers rely on recycled material as their primary raw resource. In 1994, the entire US EAF industry produced 35 million tons of steel. Chaparral, one of the largest EAF steelmakers, produced 1.41 million tons that same year, with much of its raw material provided by its on-site automobile shredder. Along with steel, the industry produces huge amounts of waste. Chaparral initiated Project STAR in conjunction with an adjacent cement plant owned and operated by Chaparral`s parent company, Texas Industries, Inc. (TXI). The project mission was to develop synergies between the two facilities to reduce or eliminate hazardous waste generation, create new products, conserve energy and resources and protect the environment. The challenge was to apply technologies that would achieve both environmental and economic objectives that address a number of different waste streams, including hazardous waste.

  2. Processing solid propellants for recycling

    SciTech Connect

    Whinnery, L.L.; Griffiths, S.K.; Handrock, J.L.; Lipkin, J.

    1994-05-01

    Rapid evolution in the structure of military forces worldwide is resulting in the retirement of numerous weapon systems. Many of these systems include rocket motors containing highly energetic propellants based on hazardous nitrocellulose/nitroglycerin (NC/NG) mixtures. Even as the surplus quantities of such material increases, however, current disposal methods -- principally open burning and open detonation (OB/OD) -- are coming under close scrutiny from environmental regulators. Environmentally conscious alternatives to disposal of propellant and explosives are thus receiving renewed interest. Recycle and reuse alternatives to OB/OD appear particularly attractive because some of the energetic materials in the inventories of surplus weapon systems represent potentially valuable resources to the commercial explosives and chemical industries. The ability to reclaim such resources is therefore likely to be a key requirement of any successful technology of the future in rocket motor demilitarization. This document consists of view graphs from the poster session.

  3. Process design and solvent recycle for the supercritical Fischer-Tropsch synthesis

    SciTech Connect

    Wensheng Linghu; Xiaohong Li; Kenji Asami; Kaoru Fujimoto

    2006-02-01

    A recycle reactor system for supercritical Fischer-Tropsch synthesis was successfully designed and tested. The new reactor system has these characteristics: (1) integration of supercritical Fischer-Tropsch reactions, natural separation of produced wax from liquid phase, and recycle of the solvent and (2) natural recycle of solvent driven by self-gravity. A 20% Co/SiO{sub 2} catalyst and n-hexane were used as a catalyst and supercritical fluid, respectively. The results show that the average CO conversion at the steady state was 45% with recycle and 58% without recycle. The lumped hydrocarbon products distribution did not have any obvious difference between with and without recycle operation; however, {alpha}-olefin content of products with recycle was lower than that without recycle. The XRD result indicates that most of the reduced cobalt remains in the metallic state during the Fischer-Tropsch reactions for both cases. 22 refs., 3 figs., 1 tab.

  4. Structural characterization of adsorbed helical and beta-sheet peptides

    NASA Astrophysics Data System (ADS)

    Samuel, Newton Thangadurai

    Adsorbed peptides on surfaces have potential applications in the fields of biomaterials, tissue engineering, peptide microarrays and nanobiotechnology. The surface region, the "biomolecular interface" between a material and the biological environment, plays a crucial role in these applications. As a result, characterization of adsorbed peptide structure, especially with respect to identity, concentration, spatial distribution, conformation and orientation, is important. The present research employs NEXAFS (near-edge X-ray absorption fine structure spectroscopy) and SFG (sum frequency generation spectroscopy) to provide information about the adsorbed peptide structure. Soft X-ray NEXAFS is a synchrotron-based technique which typically utilizes polarized X-rays to interrogate surfaces under ultra-high vacuum conditions. SFG is a non-linear optical technique which utilizes a combination of a fixed visible and a tunable infrared laser beams to generate a surface-vibrational spectrum of surface species. SFG has the added advantage of being able to directly analyze the surface-structure at the solid-liquid interface. The main goals of the present research were twofold: characterize the structure of adsorbed peptides (1) ex situ using soft X-ray NEXAFS, and (2) in situ using non-linear laser spectroscopy (SFG). Achieving the former goal involved first developing a comprehensive characterization of the carbon, nitrogen and oxygen k-edge NEXAFS spectra for amino acids, and then using a series of helical and beta-sheet peptides to demonstrate the sensitivity of polarization-dependent NEXAFS to secondary structure of adsorbed peptides. Characterizing the structure of adsorbed peptides in situ using SFG involved developing a model system to probe the solid-liquid interface in situ; demonstrating the ability to probe the molecular interactions and adsorbed secondary structure; following the time-dependent ordering of the adsorbed peptides; and establishing the ability to obtain

  5. Database of Novel and Emerging Adsorbent Materials

    National Institute of Standards and Technology Data Gateway

    SRD 205 NIST/ARPA-E Database of Novel and Emerging Adsorbent Materials (Web, free access)   The NIST/ARPA-E Database of Novel and Emerging Adsorbent Materials is a free, web-based catalog of adsorbent materials and measured adsorption properties of numerous materials obtained from article entries from the scientific literature. Search fields for the database include adsorbent material, adsorbate gas, experimental conditions (pressure, temperature), and bibliographic information (author, title, journal), and results from queries are provided as a list of articles matching the search parameters. The database also contains adsorption isotherms digitized from the cataloged articles, which can be compared visually online in the web application or exported for offline analysis.

  6. NOx adsorber and method of regenerating same

    DOEpatents

    Endicott, Dennis L.; Verkiel, Maarten; Driscoll, James J.

    2007-01-30

    New technologies, such as NOx adsorber catalytic converters, are being used to meet increasingly stringent regulations on undesirable emissions, including NOx emissions. NOx adsorbers must be periodically regenerated, which requires an increased fuel consumption. The present disclosure includes a method of regenerating a NOx adsorber within a NOx adsorber catalytic converter. At least one sensor positioned downstream from the NOx adsorber senses, in the downstream exhaust, at least one of NOx, nitrous oxide and ammonia concentrations a plurality of times during a regeneration phase. The sensor is in communication with an electronic control module that includes a regeneration monitoring algorithm operable to end the regeneration phase when a time rate of change of the at least one of NOx, nitrous oxide and ammonia concentrations is after an expected plateau region begins.

  7. Fluorescence dynamics of microsphere-adsorbed sunscreens

    NASA Astrophysics Data System (ADS)

    Krishnan, R.

    2005-03-01

    Sunscreens are generally oily substances which are prepared in organic solvents, emulsions or dispersions with micro- or nanoparticles. These molecules adsorb to and integrate into skin cells. In order to understand the photophysical properties of the sunscreen, we compare steady-state and time-resolved fluorescence in organic solvent of varying dielectric constant ɛ and adsorbed to polystyrene microspheres and dispersed in water. Steady-state fluorescence is highest and average fluorescence lifetime longest in toluene, the solvent of lowest ɛ. However, there is no uniform dependence on ɛ. Sunscreens PABA and padimate-O show complex emission spectra. Microsphere-adsorbed sunscreens exhibit highly non-exponential decay, illustrative of multiple environments of the adsorbed molecule. The heterogeneous fluorescence dynamics likely characterizes sunscreen adsorbed to cells.

  8. Solid waste characterization and recycling potential for a university campus

    SciTech Connect

    Armijo de Vega, Carolina Ojeda Benitez, Sara; Ramirez Barreto, Ma. Elizabeth

    2008-07-01

    Integrated waste management systems are one of the greatest challenges for sustainable development. For these systems to be successful, the first step is to carry out waste characterization studies. In this paper are reported the results of a waste characterization study performed in the Campus Mexicali I of the Autonomous University of Baja California (UABC). The aim of this study was to set the basis for implementation of a recovery, reduction and recycling waste management program at the campus. It was found that the campus Mexicali I produces 1 ton of solid wastes per day; more than 65% of these wastes are recyclable or potentially recyclable. These results showed that a program for segregation and recycling is feasible on a University Campus. The study also showed that the local market for recyclable waste, under present conditions - number of recycling companies and amounts of recyclables accepted - can absorb all of these wastes. Some alternatives for the potentially recyclables wastes are discussed. Finally some strategies that could be used to reduce waste at the source are discussed as well.

  9. Recycling rubber wastes. (Latest citations from the Rubber and Plastics Research Association database). Published Search

    SciTech Connect

    1996-04-01

    The bibliography contains citations concerning research and innovations in the recycling of rubber wastes. Recycling methods and equipment, applications of recycled rubber, and energy recovery systems and performance are among the topics discussed. Recycling methods compared and contrasted with various rubber waste disposal techniques are also included. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  10. Hydroponic Crop Production using Recycled Nutrients from Inedible Crop Residues

    NASA Technical Reports Server (NTRS)

    Garland, Jay L.; Mackowiak, Cheryl L.; Sager, John C.

    1993-01-01

    The coupling of plant growth and waste recycling systems is an important step toward the development of bioregenerative life support systems. This research examined the effectiveness of two alternative methods for recycling nutrients from the inedible fraction (residue) of candidate crops in a bioregenerative system as follows: (1) extraction in water, or leaching, and (2) combustion at 550 C, with subsequent reconstitution of the ash in acid. The effectiveness of the different methods was evaluated by (1) comparing the percent recovery of nutrients, and (2) measuring short- and long-term plant growth in hydroponic solutions, based on recycled nutrients.

  11. Inorganic chemically active adsorbents (ICAAs)

    SciTech Connect

    Ally, M.R.; Tavlarides, L.

    1997-10-01

    Oak Ridge National Laboratory (ORNL) researchers are developing a technology that combines metal chelation extraction technology and synthesis chemistry. They begin with a ceramic substrate such as alumina, titanium oxide or silica gel because they provide high surface area, high mechanical strength, and radiolytic stability. One preparation method involves silylation to hydrophobize the surface, followed by chemisorption of a suitable chelation agent using vapor deposition. Another route attaches newly designed chelating agents through covalent bonding by the use of coupling agents. These approaches provide stable and selective, inorganic chemically active adsorbents (ICAAs) tailored for removal of metals. The technology has the following advantages over ion exchange: (1) higher mechanical strength, (2) higher resistance to radiation fields, (3) higher selectivity for the desired metal ion, (4) no cation exchange, (5) reduced or no interference from accompanying anions, (6) faster kinetics, and (7) easy and selective regeneration. Target waste streams include metal-containing groundwater/process wastewater at ORNL`s Y-12 Plant (multiple metals), Savannah River Site (SRS), Rocky Flats (multiple metals), and Hanford; aqueous mixed wastes at Idaho National Engineering Laboratory (INEL); and scrubber water generated at SRS and INEL. Focus Areas that will benefit from this research include Mixed Waste, and Subsurface Contaminants.

  12. A novel approach to recycle bacterial culture waste for fermentation reuse via a microbial fuel cell-membrane bioreactor system.

    PubMed

    Li, Jian; Zhu, Yuan; Zhuang, Liangpeng; Otsuka, Yuichiro; Nakamura, Masaya; Goodell, Barry; Sonoki, Tomonori; He, Zhen

    2015-09-01

    Biochemical production processes require water and nutrient resources for culture media preparation, but aqueous waste is generated after the target products are extracted. In this study, culture waste (including cells) produced from a lab-scale fermenter was fed into a microbial fuel cell-membrane bioreactor (MFC-MBR) system. Electrical energy was generated via the interaction between the microbial consortia and the solid electrode in the MFC. The treated wastewater was reclaimed in this process which was reused as a solvent and a nutrient source in subsequent fermentation. Polarization testing showed that the MFC produced a maximum current density of 37.53 A m(-3) with a maximum power density of 5.49 W m(-3). The MFC was able to generate 0.04 kWh of energy per cubic meter of culture waste treated. The lab-scale fermenters containing pure cultures of an engineered Pseudomonas spp. were used to generate 2-pyrone-4,6-dicarboxylic acid (PDC), a high value platform chemical. When the MFC-MBR-treated wastewater was used for the fermenter culture medium, a specific bacterial growth rate of 1.00 ± 0.05 h(-1) was obtained with a PDC production rate of 708.11 ± 64.70 mg PDC L(-1) h(-1). Comparable values for controls using pure water were 0.95 ± 0.06 h(-1) and 621.01 ± 22.09 mg PDC L(-1) h(-1) (P > 0.05), respectively. The results provide insight on a new approach for more sustainable bio-material production while at the same time generating energy, and suggest that the treated wastewater can be used as a solvent and a nutrient source for the fermentation production of high value platform chemicals.

  13. Adsorption characteristics of water vapor on gear-pellet and honeycomb-pellet types of adsorbents containing A-type zeolite

    SciTech Connect

    Nakamura, A.; Munakata, K.; Hara, K.; Narita, S.; Sugiyama, T.; Kotoh, K.; Tanaka, M.; Uda, T.

    2015-03-15

    It is necessary to recover or process tritiated species that are extensively coexistent in nuclear fusion installations. A conventional way to recover tritium release to atmosphere is catalytic oxidation of tritiated species and adsorption of tritiated water vapor on adsorbents with high surface areas. Therefore, new adsorbents with low pressure loss and high surface areas need to be developed and utilized for such large-scale adsorption systems. In this study, attention was focused on new adsorbents, which are gear-type pellet MS5A adsorbent, gear-type pellet MS4A adsorbent and honeycomb-type pellet MS5A adsorbent. The adsorption characteristics of the new adsorbent were comparatively studied with conventional type of adsorbents (pellet-type MS5A adsorbent and pebble-type MS5A adsorbent), in terms of adsorption capacity, pressure loss and adsorption rate. It was found that the adsorption capacity of water vapor on the gear-type adsorbents is higher than that on a honeycomb-type adsorbent. The experimental breakthrough curves indicate that the adsorption rates of water vapor on gear-type and honeycomb-type adsorbents are smaller than that on conventional type adsorbents. Various adsorption models were also tested to correlate the experimental isotherms. It was found that the Langmuir-Freundlich model could properly correlate the experimental adsorption isotherms.

  14. γ-Fe2O3 nanocrystals-anchored macro/meso-porous graphene as a highly efficient adsorbent toward removal of methylene blue.

    PubMed

    Zhang, Lian Ying; Zhang, Wenlin; Zhou, Zhiqin; Li, Chang Ming

    2016-08-15

    An adsorbent, γ-Fe2O3 nanocrystals-anchored macro/meso-porous graphene was synthesized by metal etching approach toward removal of methylene blue, exhibiting rapid adsorption rate, high adsorption capacity and good recyclability, thus holding a great promise for treatment of methylene blue in wastewater. PMID:27218808

  15. A novel approach to recycle bacterial culture waste for fermentation reuse via a microbial fuel cell-membrane bioreactor system.

    PubMed

    Li, Jian; Zhu, Yuan; Zhuang, Liangpeng; Otsuka, Yuichiro; Nakamura, Masaya; Goodell, Barry; Sonoki, Tomonori; He, Zhen

    2015-09-01

    Biochemical production processes require water and nutrient resources for culture media preparation, but aqueous waste is generated after the target products are extracted. In this study, culture waste (including cells) produced from a lab-scale fermenter was fed into a microbial fuel cell-membrane bioreactor (MFC-MBR) system. Electrical energy was generated via the interaction between the microbial consortia and the solid electrode in the MFC. The treated wastewater was reclaimed in this process which was reused as a solvent and a nutrient source in subsequent fermentation. Polarization testing showed that the MFC produced a maximum current density of 37.53 A m(-3) with a maximum power density of 5.49 W m(-3). The MFC was able to generate 0.04 kWh of energy per cubic meter of culture waste treated. The lab-scale fermenters containing pure cultures of an engineered Pseudomonas spp. were used to generate 2-pyrone-4,6-dicarboxylic acid (PDC), a high value platform chemical. When the MFC-MBR-treated wastewater was used for the fermenter culture medium, a specific bacterial growth rate of 1.00 ± 0.05 h(-1) was obtained with a PDC production rate of 708.11 ± 64.70 mg PDC L(-1) h(-1). Comparable values for controls using pure water were 0.95 ± 0.06 h(-1) and 621.01 ± 22.09 mg PDC L(-1) h(-1) (P > 0.05), respectively. The results provide insight on a new approach for more sustainable bio-material production while at the same time generating energy, and suggest that the treated wastewater can be used as a solvent and a nutrient source for the fermentation production of high value platform chemicals. PMID:26013992

  16. Current organic waste recycling and the potential for local recycling through urban agriculture in Metro Manila.

    PubMed

    Hara, Yuji; Furutani, Takashi; Murakami, Akinobu; Palijon, Armando M; Yokohari, Makoto

    2011-11-01

    Using the solid waste management programmes of three barangays (the smallest unit of local government in the Philippines) in Quezon City, Metro Manila, as a case study, this research aimed to further the development of efficient organic waste recycling systems through the promotion of urban agricultural activities on green and vacant spaces. First, the quantity of organic waste and compost produced through ongoing barangay projects was measured. The amount of compost that could potentially be utilized on farmland and vacant land within the barangays was then identified to determine the possibility of a local recycling system. The results indicate that, at present, securing buyers for compost is difficult and, therefore, most compost is distributed to large neighbouring farm villages. However, the present analysis of potential compost use within the barangay demonstrates that a more local compost recycling system is indeed feasible.

  17. Cryptic young zircon and young plagioclase in the Kaharoa Rhyolite, Tarawera, New Zealand: Implications for crystal recycling in magmatic systems

    NASA Astrophysics Data System (ADS)

    Klemetti, E. W.; Cooper, K. M.

    2007-12-01

    Rhyolite is "masked" in SHRIMP-RG analyses because the young zircon is present either inclusions in plagioclase excluded from zircon separate or as thin rims on older zircons that can't be effectively analyzed. The Kaharoa data implies that zircon records a longer history than plagioclase, and older zircon ages represent the mush/plutonic roots of the volcano. The existence of old zircon with little evidence for old plagioclase suggest that remobilization of the plutonic roots by new heating events destroys most of the old plagioclase crystals. Plagioclase and zircon both crystallize during the short period between remobilization and eruption. However, young zircon growth is cryptic, suggesting that in-situ zircon ages may in general be biased toward older ages. Overall, plagioclase and zircon offer potential to unravel a large time period of the history of a magmatic system, especially silicic magma with long histories.

  18. Waste recycling issues in bioregenerative life support

    NASA Technical Reports Server (NTRS)

    Macelroy, R. D.; Wang, D.

    1989-01-01

    Research and technology development issues centering on the recycling of materials within a bioregenerative life support system are reviewed. The importance of recovering waste materials for subsequent use is emphasized. Such material reclamation will substantially decrease the energy penalty paid for bioregenerative life support systems, and can potentially decrease the size of the system and its power demands by a significant amount. Reclamation of fixed nitrogen and the sugars in cellulosic materials is discussed.

  19. Waste recycling issues in bioregenerative life support.

    PubMed

    MacElroy, R D; Wang, D

    1989-01-01

    Research and technology development issues centering on the recycling of materials within a bioregenerative life support system are reviewed. The importance of recovering waste materials for subsequent use is emphasized. Such material reclamation will substantially decrease the energy penalty paid for bioregenerative life support systems, and can potentially decrease the size of the system and its power demands by a significant amount. Reclamation of fixed nitrogen and the sugars in cellulosic materials is discussed. PMID:11537394

  20. Establishing components of community satisfaction with recycled water use through a structural equation model.

    PubMed

    Hurlimann, Anna; Hemphill, Elizabeth; McKay, Jennifer; Geursen, Gus

    2008-09-01

    The use of recycled water is being promoted through policy in many parts of the world with the aim of achieving sustainable water management. However there are some major barriers to the success of recycled water use policies and their instruments, in particular for potable reuse schemes. One of these barriers can be a lack of community support. Despite the critical nature of community attitudes to recycled water to the success of projects, they are often little understood. Further information is required to ensure the successful implementation of recycled water policy and to ensure sustainable management of water resources is achieved. The aim of this paper is to establish the key components of community satisfaction with recycled water. This was investigated through a case study of the Mawson Lakes population in South Australia, where recycled water is used for non-potable purposes through a dual water supply system (the 'recycled water system'). This paper reports results from a survey of 162 Mawson Lakes residents. A structural equation model (SEM) was developed and tested to explain and predict components of community satisfaction with recycled water use (for non-potable use) through the dual water supply system. Results indicate the components of satisfaction with recycled water use were an individual's positive perception of: the Water Authority's communication, trust in the Water Authority, fairness in the recycled water system's implementation, quality of the recycled water, financial value of the recycled water system, and risk associated with recycled water use (negative relationship). The results of this study have positive implications for the future management and implementation of recycled water projects in particular through dual water supply systems. The results indicate to water authorities and water policy developers guiding principles for community consultation with regards to the management of recycled water projects.

  1. Management of recyclable fissile and fertile materials

    SciTech Connect

    Bertel, Evelyne; Dujardin, Thierry

    2007-07-01

    The possibility to recycle fuel is a very attractive - nearly unique - feature of nuclear energy systems. Fissile and fertile materials that are contained in spent nuclear fuels and enrichment plant tails for example may be retrieved and re-used to provide additional energy and reduce the amount and toxicity of ultimate waste to be sent to repositories. While recycling becomes increasingly attractive in the context of renewed interest for nuclear energy and of sustainable development goals, extended interim storage and direct disposal of recyclable materials remain options favoured by many countries. Recyclable materials which are not intended to be re-used may be disposed of in a safe way guaranteeing their isolation from the biosphere over very long periods of time until they become harmless for humans and the environment. The study on recyclable fissile and fertile materials published in 2007 by the OECD was carried out by its Nuclear Energy Agency (NEA) in order to review technical, strategic and policy issues raised by the management of those materials and to provide some insights on the opportunities and challenges offered by alternative options in this regard. The materials considered include: spent fuel; depleted uranium from enrichment plant tails; separated uranium and plutonium from commercial reprocessing plants; ex-military materials (highly enriched uranium and plutonium) declared excess to national security by the Russian Federation and the United States; and thorium inventories. The present paper is based on the analyses, findings and conclusions from the NEA study. It provides overview on the quantities and potential energetic value of recyclable materials available worldwide. The main advantages and drawbacks of the two management options that may be adopted are described. Some findings and conclusions are drawn from the identification and analysis of economic, social and environmental indicators associated with each option that need to be taken

  2. Complexation of trace metals by adsorbed natural organic matter

    USGS Publications Warehouse

    Davis, J.A.

    1984-01-01

    The adsorption behavior and solution speciation of Cu(II) and Cd(II) were studied in model systems containing colloidal alumina particles and dissolved natural organic matter. At equilibrium a significant fraction of the alumina surface was covered by adsorbed organic matter. Cu(II) was partitioned primarily between the surface-bound organic matter and dissolved Cu-organic complexes in the aqueous phase. Complexation of Cu2+ with the functional groups of adsorbed organic matter was stronger than complexation with uncovered alumina surface hydroxyls. It is shown that the complexation of Cu(II) by adsorbed organic matter can be described by an apparent stability constant approximately equal to the value found for solution phase equilibria. In contrast, Cd(II) adsorption was not significantly affected by the presence of organic matter at the surface, due to weak complex formation with the organic ligands. The results demonstrate that general models of trace element partitioning in natural waters must consider the presence of adsorbed organic matter. ?? 1984.

  3. Conveyor Cultivation of the Halophytic Plant Salicornia europaea for the Recycling of NaCl from Human Liquid Waste in a Biological Life Support System.

    NASA Astrophysics Data System (ADS)

    Balnokin, Yurii; Myasoedov, Nikolay; Popova, Larissa; Tikhomirov, Alexander A.; Ushakova, Sofya; Tikhomirova, Natalia; Lasseur, Christophe; Gros, Jean-Bernard

    One problem in designing bioregenerative life support systems (BLSS) is developing technolo-gies to include human liquid and solid waste in intrasystem recycling. A specific task is recycling of NaCl excreted in urine by humans. We showed recently that this could be achieved through inclusion of the salt accumulating halophyte Salicornia europaea in the autotrophic compart-ment of the BLSS (Balnokin et al., ASR, 2010, in press). A model of NaCl circulation in BLSS with inclusion of S. europaea was based on the NaCl turnover in the human -urine -nutrient solution -S. europaea -human cycle. Mineralized urine was used as a basis for preparation of a nutrient solution for the halophyte cultivation. The shoots of the halophyte cultivated in the mineralized urine and containing NaCl could to be used by the BLSS inhabitants in their diets. In this report we describe cultivation of S. europaea which allows turnover of NaCl and produces daily shoot biomass containing Na+ and Cl- in quantities approximately equal to those excreted in daily human urine. The plants were grown in water culture in a climatic chamber under controlled conditions. A solution simulating mineralized urine (SSMU) was used as a basis for preparation of a nutri-ent solution for S. europaea cultivation. For continuous biomass production, seedlings of S. europaea, germinated preliminary in moist sand, were being transferred to the nutrient solu-tion at regular intervals (every two days). Duration of the conveyor operation was 112 days. During the first 56 days, the seedlings were being planted in SSMU diluted by a factor of 1.5 (2/3 SSMU). The same solution was introduced into the growth vessels as volumes of growth medium decreased due to plant transpiration. Starting from the 56th day as conveyor operation was initiated, the plants were being harvested every two days; the solutions from the discharged vessels were mixed with the fresh SSMU and the mixture was introduced into all other growth vessels of

  4. Why recycle? A comparison of recycling motivations in four communities

    NASA Astrophysics Data System (ADS)

    Vining, Joanne; Linn, Nancy; Burdge, Rabel J.

    1992-11-01

    Four Illinois communities with different sociode-mographic compositions and at various stages of planning for solid waste management were surveyed to determine the influence of sociodemographic variables and planning stages on the factors that motivate recycling behavior. A factor analysis of importance ratings of reasons for recycling and for not recycling yielded five factors interpreted as altruism, personal inconvenience, social influences, economic incentives, and household storage. The four communities were shown to be significantly different in multivariate analyses of the five motivational factors. However, attempts to explain these community differences with regression analyses, which predicted the motivational factors with dummy codes for planning stages, a measure of self-reported recycling behavior, and sociodemographic measures were unsatisfactory. Contrary to expectation, the solid waste management planning stages of the cities (curbside pickup, recycling dropoff center, and planning in progress) contributed only very slightly to the prediction of motivational factors for recycling. Community differences were better explained by different underlying motivational structures among the four communities. Altruistic reasons for recycling (e.g., conserving resources) composed the only factor which was similar across the four communities. This factor was also perceived to be the most important reason for recycling by respondents from all four communities. The results of the study supported the notion that convenient, voluntary recycling programs that rely on environmental concern and conscience for motivation are useful approaches to reducing waste.

  5. Lead recycling in the United States in 1998

    USGS Publications Warehouse

    Smith, Gerald R.

    2002-01-01

    This materials flow study includes a description of lead supply and demand factors for the United States to illustrate the extent of lead recycling and to identify recycling trends. Understanding the system of materials flow from source to ultimate disposition can assist in improving the management of the use of natural resources in a manner that is compatible with sound environmental practices. The quantity of lead recycled in 1998, as a percentage of apparent lead supply, was estimated to be about 63 percent, and recycling efficiency, to be 95 percent. Of the total lead consumed in products for the U.S. market in 1998, an estimated 10 percent was consumed in products in which the lead was not readily recyclable.

  6. Lead recycling in the United States in 1998

    USGS Publications Warehouse

    Smith, Gerald R.

    2001-01-01

    This materials flow study includes a description of lead supply and demand factors for the United States to illustrate the extent of lead recycling and to identify recycling trends. Understanding the system of materials flow from source to ultimate disposition can assist in improving the management of the use of natural resources in a manner that is compatible with sound environmental practices. The quantity of lead recycled in 1998, as a percentage of apparent lead supply, was estimated to be about 63%, and recycling efficiency, to be 95%. Of the total lead consumed in products for the U.S. market in 1998, an estimated 10% was consumed in products in which the lead was not readily recyclable.

  7. Safeguards and nonproliferation aspects of a dry fuel recycling technology

    SciTech Connect

    Pillay, K.K.S.

    1993-05-01

    Los Alamos National Laboratory undertook an independent assessment of the proliferation potentials and safeguardability of a dry fuel recycling technology, whereby spent pressurized-water reactor (PWR) fuels are used to fuel canadian deuterium uranium (CANDU) reactors. Objectives of this study included (1) the evaluation of presently available technologies that may be useful to safeguard technology options for dry fuel recycling (2) and identification of near-term and long-term research needs to develop process-specific safeguards requirements. The primary conclusion of this assessment is that like all other fuel cycle alternatives proposed in the past, the dry fuel recycle entails prolfferation risks and that there are no absolute technical fixes to eliminate such risks. This study further concludes that the proliferation risks of dry fuel recycling options are relatively minimal and presently known safeguards systems and technologies can be modified and/or adapted to meet the requirements of safeguarding such fuel recycle facilities.

  8. Electric field cancellation on quartz by Rb adsorbate-induced negative electron affinity

    NASA Astrophysics Data System (ADS)

    Shaffer, James

    2016-05-01

    We investigate the (0001) surface of single crystal quartz with a submonolayer of Rb adsorbates. Using Rydberg atom electromagnetically induced transparency, we investigate the electric fields resulting from Rb adsorbed on the quartz surface, and measure the activation energy of the Rb adsorbates. We show that the adsorbed Rb induces a negative electron affinity (NEA) on the quartz surface. The NEA surface allows low energy electrons to bind to the surface and cancel the electric field from the Rb adsorbates. Our results are important for integrating Rydberg atoms into hybrid quantum systems and the fundamental study of atom-surface interactions, as well as applications for electrons bound to a 2D surface. This work was supported by the DARPA Quasar program by a Grant through ARO (60181-PH-DRP) and the AFOSR (FA9550-12-1-0282),.

  9. Adsorbed natural gas storage with activated carbon

    SciTech Connect

    Sun, Jian; Brady, T.A.; Rood, M.J.

    1996-12-31

    Despite technical advances to reduce air pollution emissions, motor vehicles still account for 30 to 70% emissions of all urban air pollutants. The Clean Air Act Amendments of 1990 require 100 cities in the United States to reduce the amount of their smog within 5 to 15 years. Hence, auto emissions, the major cause of smog, must be reduced 30 to 60% by 1998. Natural gas con be combusted with less pollutant emissions. Adsorbed natural gas (ANG) uses adsorbents and operates with a low storage pressure which results in lower capital costs and maintenance. This paper describes the production of an activated carbon adsorbent produced from an Illinois coal for ANG.

  10. States of water adsorbed on perindopril crystals

    NASA Astrophysics Data System (ADS)

    Stepanov, V. A.; Khmelevskaya, V. S.; Bogdanov, N. Yu.; Gorchakov, K. A.

    2011-10-01

    The relationship between the structural state of adsorbed water, the crystal structure of the substances, and the solubility of the perindopril salt C19H32N2O5 · C4H11N in water was studied by IR spectroscopy and X-ray diffractometry. The high-frequency shift of the stretching vibrations of adsorbed water and the solubility depend on the crystal structure of the drug substance. A reversible chemical reaction occurred between the adsorbed water and the perindopril salt.

  11. Recent trends in automobile recycling: An energy and economic assessment

    SciTech Connect

    Curlee, T.R.; Das, S.; Rizy, C.G.; Schexanyder, S.M.

    1994-03-01

    Recent and anticipated trends in the material composition of domestic and imported automobiles and the increasing cost of landfilling the non-recyclable portion of automobiles (automobile shredder residue or ASR) pose questions about the future of automobile recycling. This report documents the findings of a study sponsored by the US Department of Energy`s Office of Environmental Analysis to examine the impacts of these and other relevant trends on the life-cycle energy consumption of automobiles and on the economic viability of the domestic automobile recycling industry. More specifically, the study (1) reviewed the status of the automobile recycling industry in the United States, including the current technologies used to process scrapped automobiles and the challenges facing the automobile recycling industry; (2) examined the current status and future trends of automobile recycling in Europe and Japan, with the objectives of identifying ``lessons learned`` and pinpointing differences between those areas and the United States; (3) developed estimates of the energy system impacts of the recycling status quo and projections of the probable energy impacts of alternative technical and institutional approaches to recycling; and (4) identified the key policy questions that will determine the future economic viability of automobile shredder facilities in the United States.

  12. Recycled Coarse Aggregate Produced by Pulsed Discharge in Water

    NASA Astrophysics Data System (ADS)

    Namihira, Takao; Shigeishi, Mitsuhiro; Nakashima, Kazuyuki; Murakami, Akira; Kuroki, Kaori; Kiyan, Tsuyoshi; Tomoda, Yuichi; Sakugawa, Takashi; Katsuki, Sunao; Akiyama, Hidenori; Ohtsu, Masayasu

    In Japan, the recycling ratio of concrete scraps has been kept over 98 % after the Law for the Recycling of Construction Materials was enforced in 2000. In the present, most of concrete scraps were recycled as the Lower Subbase Course Material. On the other hand, it is predicted to be difficult to keep this higher recycling ratio in the near future because concrete scraps increase rapidly and would reach to over 3 times of present situation in 2010. In addition, the demand of concrete scraps as the Lower Subbase Course Material has been decreased. Therefore, new way to reuse concrete scraps must be developed. Concrete scraps normally consist of 70 % of coarse aggregate, 19 % of water and 11 % of cement. To obtain the higher recycling ratio, the higher recycling ratio of coarse aggregate is desired. In this paper, a new method for recycling coarse aggregate from concrete scraps has been developed and demonstrated. The system includes a Marx generator and a point to hemisphere mesh electrode immersed in water. In the demonstration, the test piece of concrete scrap was located between the electrodes and was treated by the pulsed discharge. After discharge treatment of test piece, the recycling coarse aggregates were evaluated under JIS and TS and had enough quality for utilization as the coarse aggregate.

  13. Volumetric Interpretation of Protein Adsorption: Capacity Scaling with Adsorbate Molecular Weight and Adsorbent Surface Energy

    PubMed Central

    Parhi, Purnendu; Golas, Avantika; Barnthip, Naris; Noh, Hyeran; Vogler, Erwin A.

    2009-01-01

    Silanized-glass-particle adsorbent capacities are extracted from adsorption isotherms of human serum albumin (HSA, 66 kDa), immunoglobulin G (IgG, 160 kDa), fibrinogen (Fib, 341 kDa), and immunoglobulin M (IgM, 1000 kDa) for adsorbent surface energies sampling the observable range of water wettability. Adsorbent capacity expressed as either mass-or-moles per-unit-adsorbent-area increases with protein molecular weight (MW) in a manner that is quantitatively inconsistent with the idea that proteins adsorb as a monolayer at the solution-material interface in any physically-realizable configuration or state of denaturation. Capacity decreases monotonically with increasing adsorbent hydrophilicity to the limit-of-detection (LOD) near τo = 30 dyne/cm (θ~65o) for all protein/surface combinations studied (where τo≡γlvocosθ is the water adhesion tension, γlvo is the interfacial tension of pure-buffer solution, and θ is the buffer advancing contact angle). Experimental evidence thus shows that adsorbent capacity depends on both adsorbent surface energy and adsorbate size. Comparison of theory to experiment implies that proteins do not adsorb onto a two-dimensional (2D) interfacial plane as frequently depicted in the literature but rather partition from solution into a three-dimensional (3D) interphase region that separates the physical surface from bulk solution. This interphase has a finite volume related to the dimensions of hydrated protein in the adsorbed state (defining “layer” thickness). The interphase can be comprised of a number of adsorbed-protein layers depending on the solution concentration in which adsorbent is immersed, molecular volume of the adsorbing protein (proportional to MW), and adsorbent hydrophilicity. Multilayer adsorption accounts for adsorbent capacity over-and-above monolayer and is inconsistent with the idea that protein adsorbs to surfaces primarily through protein/surface interactions because proteins within second (or higher

  14. REGULATIONS ON PHOTOVOLTAIC MODULE DISPOSAL AND RECYCLING.

    SciTech Connect

    FTHENAKIS,V.

    2001-01-29

    Environmental regulations can have a significant impact on product use, disposal, and recycling. This report summarizes the basic aspects of current federal, state and international regulations which apply to end-of-life photovoltaic (PV) modules and PV manufacturing scrap destined for disposal or recycling. It also discusses proposed regulations for electronics that may set the ground of what is to be expected in this area in the near future. In the US, several states have started programs to support the recycling of electronic equipment, and materials destined for recycling often are excepted from solid waste regulations during the collection, transfer, storage and processing stages. California regulations are described separately because they are different from those of most other states. International agreements on the movement of waste between different countries may pose barriers to cross-border shipments. Currently waste moves freely among country members of the Organization of Economic Cooperation and Development (OECD), and between the US and the four countries with which the US has bilateral agreements. However, it is expected, that the US will adopt the rules of the Basel Convention (an agreement which currently applies to 128 countries but not the US) and that the Convection's waste classification system will influence the current OECD waste-handling system. Some countries adopting the Basel Convention consider end-of-life electronics to be hazardous waste, whereas the OECD countries consider them to be non-hazardous. Also, waste management regulations potentially affecting electronics in Germany and Japan are mentioned in this report.

  15. Nanofiber adsorbents for high productivity continuous downstream processing.

    PubMed

    Hardick, Oliver; Dods, Stewart; Stevens, Bob; Bracewell, Daniel G

    2015-11-10

    An ever increasing focus is being placed on the manufacturing costs of biotherapeutics. The drive towards continuous processing offers one opportunity to address these costs through the advantages it offers. Continuous operation presents opportunities for real-time process monitoring and automated control with potential benefits including predictable product specification, reduced labour costs, and integration with other continuous processes. Specifically to chromatographic operations continuous processing presents an opportunity to use expensive media more efficiently while reducing their size and therefore cost. Here for the first time we show how a new adsorbent material (cellulosic nanofibers) having advantageous convective mass transfer properties can be combined with a high frequency simulated moving bed (SMB) design to provide superior productivity in a simple bioseparation. Electrospun polymeric nanofiber adsorbents offer an alternative ligand support surface for bioseparations. Their non-woven fiber structure with diameters in the sub-micron range creates a remarkably high surface area material that allows for rapid convective flow operations. A proof of concept study demonstrated the performance of an anion exchange nanofiber adsorbent based on criteria including flow and mass transfer properties, binding capacity, reproducibility and life-cycle performance. Binding capacities of the DEAE adsorbents were demonstrated to be 10mg/mL, this is indeed only a fraction of what is achievable from porous bead resins but in combination with a very high flowrate, the productivity of the nanofiber system is shown to be significant. Suitable packing into a flow distribution device has allowed for reproducible bind-elute operations at flowrates of 2,400 cm/h, many times greater than those used in typical beaded systems. These characteristics make them ideal candidates for operation in continuous chromatography systems. A SMB system was developed and optimised to

  16. The Life Cycle Cost (LCC) of Life Support Recycling and Resupply

    NASA Technical Reports Server (NTRS)

    Jones, Harry W.

    2015-01-01

    Brief human space missions supply all the crew's water and oxygen from Earth. The multiyear International Space Station (ISS) program instead uses physicochemical life support systems to recycle water and oxygen. This paper compares the Life Cycle Cost (LCC) of recycling to the LCC of resupply for potential future long duration human space missions. Recycling systems have high initial development costs but relatively low durationdependent support costs. This means that recycling is more cost effective for longer missions. Resupplying all the water and oxygen requires little initial development cost but has a much higher launch mass and launch cost. The cost of resupply increases as the mission duration increases. Resupply is therefore more cost effective than recycling for shorter missions. A recycling system pays for itself when the resupply LCC grows greater over time than the recycling LCC. The time when this occurs is called the recycling breakeven date. Recycling will cost very much less than resupply for long duration missions within the Earth-Moon system, such as a future space station or Moon base. But recycling would cost about the same as resupply for long duration deep space missions, such as a Mars trip. Because it is not possible to provide emergency supplies or quick return options on the way to Mars, more expensive redundant recycling systems will be needed.

  17. Cellulase stability, adsorption/desorption profiles and recycling during successive cycles of hydrolysis and fermentation of wheat straw.

    PubMed

    Rodrigues, Ana Cristina; Felby, Claus; Gama, Miguel

    2014-03-01

    The potential of enzymes recycling after hydrolysis and fermentation of wheat straw under a variety of conditions was investigated, monitoring the activity of the enzymes in the solid and liquid fractions, using low molecular weight substrates. A significant amount of active enzymes could be recovered by recycling the liquid phase. In the early stage of the process, enzyme adsorb to the substrate, then gradually returning to the solution as the saccharification proceeds. At 50°C, normally regarded as an acceptable operational temperature for saccharification, the enzymes (Celluclast) significantly undergo thermal deactivation. The hydrolysis yield and enzyme recycling efficiency in consecutive recycling rounds can be increased by using high enzyme loadings and moderate temperatures. Indeed, the amount of enzymes in the liquid phase increased with its thermostability and hydrolytic efficiency. This study contributes towards developing effective enzymes recycling strategies and helping to reduce the enzyme costs on bioethanol production.

  18. Preparation of sodium humate/{alpha}-aluminum oxide adsorbents for flue gas desulfurization

    SciTech Connect

    Sun, Z.G.; Gao, H.Y.; Hu, G.X.; Li, Y.H.

    2009-06-15

    A new composite adsorbent of sodium humate (HNa)=alpha-aluminium oxide ({alpha}-Al{sub 2}O{sub 3}) for flue gas desulfurization (FGD) was prepared using the impregnation method. Both the adsorbent of {alpha}-Al{sub 2}O{sub 3} and HNa={alpha}-Al{sub 2}O{sub 3} were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), energy dispersive X-ray spectrometer (EDS), and scanning electron microscope (SEM). Desulfurization activity of the adsorbent impregnated with ammonia (NH{sub 4}OH) was investigated in a fixed-bed quartz reactor. Experimental results indicate that HNa, which coats the {alpha}-Al{sub 2}O{sub 3} fibers impregnated with HNa solution, improved the property of {alpha}-Al{sub 2}O{sub 3} support for FGD. On the other hand, the HNa-coating on the adsorbent of HNa/{alpha}-Al{sub 2}O{sub 3} impregnated with NH{sub 4}OH played an important role in enhancing the desulfurization property of the {alpha}-Al{sub 2}O{sub 3}. Due to the strong adsorption capability of HNa, more NH{sub 4}OH was adsorbed in the adsorbent of HNa/{alpha}-Al{sub 2}O{sub 3} the longer a high sulfur dioxide (SO{sub 2}) conversation rate was maintained. In addition, because the desulfurization product was a compound fertilizer consisting of ammonium sulfate ((NH{sub 4}){sub 2}SO{sub 4}), ammonium humate (HNH{sub 4}), and HNa, the recycling use of {alpha}-Al{sub 2}O{sub 3} was also easily achieved. Thus, this study can provide a new cost-effective way to remove SO{sub 2} from flue gas.

  19. Prevalence and transmission of antimicrobial resistance among Aeromonas populations from a duckweed aquaculture based hospital sewage water recycling system in Bangladesh.

    PubMed

    Rahman, Mokhlasur; Huys, Geert; Kühn, Inger; Rahman, Motiur; Möllby, Roland

    2009-10-01

    In order to investigate the influence of a duckweed aquaculture based hospital sewage water recycling plant on the prevalence and dissemination of antibiotic resistance, we made use of an existing collection of 1,315 Aeromonas isolates that were previously typed by the biochemical fingerprinting PhP-AE system. In these treatment plant, hospital raw sewage water is first collected in a settlement pond (referred to as sewage water in this study) and is then transferred to a lagoon, where the duckweed (Lemnaceae) is grown (referred to as lagoon). The duckweed is harvested and used as feed for the fish in a separate pond (referred to as fish pond). From this collection, representatives of 288 PhP types were subjected to antibiotic susceptibility testing for eight antimicrobials by broth microdilution method. The overall resistance rates among Aeromonas isolates from the treatment plant were highest for ampicillin (87%) and erythromycin (79%) followed by cephalothin (58%), nalidixic acid (52%), streptomycin (51%), tetracycline (31%), chloramphenicol (13%) and gentamicin (8%). A significantly lower prevalence of antibiotic resistance was found in Aeromonas from environmental control water, patient stool samples, duckweed and fish compared to sewage water isolates. The prevalence of resistance in the sewage water was not significantly reduced compared to the lagoon water and fish pond. Throughout the treatment system, the frequencies of resistant strains were found to diminish during the sewage water purification process, i.e. in the lagoon where sewage water is used to grow the duckweed. However, the frequency of resistant strains again increased in the fish pond where sewage grown duckweed is used for aquaculture. Among the selected isolates, two multiresistant clonal groups of Aeromonas caviae HG4 were identified that exhibited indistinguishable PhP and amplified fragment length polymorphism fingerprints and shared a common plasmid of approximately 5 kb

  20. Prevalence and transmission of antimicrobial resistance among Aeromonas populations from a duckweed aquaculture based hospital sewage water recycling system in Bangladesh.

    PubMed

    Rahman, Mokhlasur; Huys, Geert; Kühn, Inger; Rahman, Motiur; Möllby, Roland

    2009-10-01

    In order to investigate the influence of a duckweed aquaculture based hospital sewage water recycling plant on the prevalence and dissemination of antibiotic resistance, we made use of an existing collection of 1,315 Aeromonas isolates that were previously typed by the biochemical fingerprinting PhP-AE system. In these treatment plant, hospital raw sewage water is first collected in a settlement pond (referred to as sewage water in this study) and is then transferred to a lagoon, where the duckweed (Lemnaceae) is grown (referred to as lagoon). The duckweed is harvested and used as feed for the fish in a separate pond (referred to as fish pond). From this collection, representatives of 288 PhP types were subjected to antibiotic susceptibility testing for eight antimicrobials by broth microdilution method. The overall resistance rates among Aeromonas isolates from the treatment plant were highest for ampicillin (87%) and erythromycin (79%) followed by cephalothin (58%), nalidixic acid (52%), streptomycin (51%), tetracycline (31%), chloramphenicol (13%) and gentamicin (8%). A significantly lower prevalence of antibiotic resistance was found in Aeromonas from environmental control water, patient stool samples, duckweed and fish compared to sewage water isolates. The prevalence of resistance in the sewage water was not significantly reduced compared to the lagoon water and fish pond. Throughout the treatment system, the frequencies of resistant strains were found to diminish during the sewage water purification process, i.e. in the lagoon where sewage water is used to grow the duckweed. However, the frequency of resistant strains again increased in the fish pond where sewage grown duckweed is used for aquaculture. Among the selected isolates, two multiresistant clonal groups of Aeromonas caviae HG4 were identified that exhibited indistinguishable PhP and amplified fragment length polymorphism fingerprints and shared a common plasmid of approximately 5 kb

  1. Recycled poly(ethylene terephthalate) for direct food contact applications: challenge test of an inline recycling process.

    PubMed

    Franz, R; Welle, F

    2002-05-01

    Of all the plastics used for packaging, due to its low diffusivity and chemical inertness, poly(ethylene terephthalate) (PET) is one of the favoured candidate plastics for closed-loop recycling for new packaging applications. In the work reported here, a PET-recycling process was investigated with respect to its cleaning efficiency and compliance of the PET recyclate with food law. The key technology of the investigated PET-recycling process to remove contaminants consists of a predecontamination-extruder combination. At the end of the recycling process, there is either a pelletizing system or downstream equipment to produce preforms or flat sheets. Therefore, the process has two process options, an inline production of PET preforms and a batch option producing PET pellets. In the case of possible misuse of PET bottles by the consumer, the inline process produces higher concentrations in the bottle wall of the recyclate containing preforms. Owing to the dilution of the PET output material by large amounts of uncontaminated PET, the batch option is the less critical process in terms of consumer protection. Regarding an appropriate testing procedure for the evaluation of a bottle-to-bottle recycling process, both process options have their own specific requirements with respect to the design of a challenge test. A novel challenge test approach to the inline mode of a recycling process is presented here.

  2. Recycled poly(ethylene terephthalate) for direct food contact applications: challenge test of an inline recycling process.

    PubMed

    Franz, R; Welle, F

    2002-05-01

    Of all the plastics used for packaging, due to its low diffusivity and chemical inertness, poly(ethylene terephthalate) (PET) is one of the favoured candidate plastics for closed-loop recycling for new packaging applications. In the work reported here, a PET-recycling process was investigated with respect to its cleaning efficiency and compliance of the PET recyclate with food law. The key technology of the investigated PET-recycling process to remove contaminants consists of a predecontamination-extruder combination. At the end of the recycling process, there is either a pelletizing system or downstream equipment to produce preforms or flat sheets. Therefore, the process has two process options, an inline production of PET preforms and a batch option producing PET pellets. In the case of possible misuse of PET bottles by the consumer, the inline process produces higher concentrations in the bottle wall of the recyclate containing preforms. Owing to the dilution of the PET output material by large amounts of uncontaminated PET, the batch option is the less critical process in terms of consumer protection. Regarding an appropriate testing procedure for the evaluation of a bottle-to-bottle recycling process, both process options have their own specific requirements with respect to the design of a challenge test. A novel challenge test approach to the inline mode of a recycling process is presented here. PMID:12028650

  3. Emulsified industrial oils recycling

    SciTech Connect

    Gabris, T.

    1982-04-01

    The industrial lubricant market has been analyzed with emphasis on current and/or developing recycling and re-refining technologies. This task has been performed for the United States and other industrialized countries, specifically France, West Germany, Italy and Japan. Attention has been focused at emulsion-type fluids regardless of the industrial application involved. It was found that emulsion-type fluids in the United States represent a much higher percentage of the total fluids used than in other industrialized countries. While recycling is an active matter explored by the industry, re-refining is rather a result of other issues than the mere fact that oil can be regenerated from a used industrial emulsion. To extend the longevity of an emulsion is a logical step to keep expenses down by using the emulsion as long as possible. There is, however, another important factor influencing this issue: regulations governing the disposal of such fluids. The ecological question, the respect for nature and the natural balances, is often seen now as everybody's task. Regulations forbid dumping used emulsions in the environment without prior treatment of the water phase and separation of the oil phase. This is a costly procedure, so recycling is attractive since it postpones the problem. It is questionable whether re-refining of these emulsions - as a business - could stand on its own if these emulsions did not have to be taken apart for disposal purposes. Once the emulsion is separated into a water and an oil phase, however, re-refining of the oil does become economical.

  4. Crustal recycling at active convergent margins and growth of the continents

    SciTech Connect

    Morris, J. . Dept. of Earth and Planetary Sciences Carnegie Institution of Washington, DC ); Zheng, S.H. . Dept. of Geological Sciences)

    1993-03-01

    Subduction of continental materials at active convergent margins provides an opportunity to evaluate mechanisms and magnitude of subduction-driven crustal recycling and its potential role in continental growth. Continental materials, in the form of detrital sediments and elements adsorbed out of seawater onto settling sediment particles, are continuously supplied to subduction trenches. The sediments may be accreted and re-attached to the continental crust through collisional processes subducted to depth and subsequently involved in arc magma generation (magmatic recycling) or subducted past the arc into the deep mantle. Cosmogenic 10Be, which is strongly adsorbed onto settling sediment particles, may be used to investigate all aspects of sediment recycling. Because of its atmospheric source and short half-life, the high 10Be concentrations observed in many volcanic arc magmas require that the uppermost part of the sediment column be subducted to depth and some part of it returned to the surface in arc magmas within the measurable 10Be lifetime, effectively a few million years. In the Aleutians, Middle America and Marianas, 10Be is present only in the upper 12m, 100m and 25m, respectively of the subducting oceanic sediment column. Using von Huene and Scholl's 1991 estimate of oceanic sediment supply to trenches, the authors evidence for sediment bypassing of accretionary margins, and the limited recycling of most major elements in arc volcanism, estimates of sediment subduction are nearly equal to those required in a steady-state, recycling model for growth of the continents through time.

  5. Sweet potato starch residue as starting material to prepare polyacrylonitrile adsorbent via SI-SET-LRP.

    PubMed

    Hao, Zhihai; Wang, Dongju; Chen, Hou; Sun, Jinming; Xu, Yuanyuan

    2014-02-26

    Sweet potato starch residue (SPSR) was used as starting material to prepare an eco-friendly adsorbent. SPSR was modified by bromoacetyl bromide to obtain a macroinitiator for surface-initiated single electron transfer-living radical polymerization (SI-SET-LRP) of acrylonitrile (AN) catalyzed by La(0)/hexamethylenetetramine (HMTA) in N,N-dimethylformamide (DMF) in the presence of ascorbic acid (VC). The amidoxime (AO) adsorbent was prepared by the reaction of the graft copolymer bromoactylated sweet potato starch (BSPS)/polyacrylonitrile (BSPS-g-PAN) with hydroxylamine. The maximum adsorption capacity for Hg(II) was 4.03 mmol·g(-1). This simple method provided a novel approach to recycle and reuse agricultural residues for controlling heavy metal pollution. PMID:24512626

  6. Removal of molecular adsorbates on gold nanoparticles using sodium borohydride in water.

    PubMed

    Ansar, Siyam M; Ameer, Fathima S; Hu, Wenfang; Zou, Shengli; Pittman, Charles U; Zhang, Dongmao

    2013-03-13

    The mechanism of sodium borohydride removal of organothiols from gold nanoparticles (AuNPs) was studied using an experimental investigation and computational modeling. Organothiols and other AuNP surface adsorbates such as thiophene, adenine, rhodamine, small anions (Br(-) and I(-)), and a polymer (PVP, poly(N-vinylpyrrolidone)) can all be rapidly and completely removed from the AuNP surfaces. A computational study showed that hydride derived from sodium borohydride has a higher binding affinity to AuNPs than organothiols. Thus, it can displace organothiols and all the other adsorbates tested from AuNPs. Sodium borohydride may be used as a hazard-free, general-purpose detergent that should find utility in a variety of AuNP applications including catalysis, biosensing, surface enhanced Raman spectroscopy, and AuNP recycle and reuse.

  7. PERVAPORATION USING ADSORBENT-FILLED MEMBRANES

    EPA Science Inventory

    Membranes containing selective fillers, such as zeolites and activated carbon, can improve the separation by pervaporation. Applications of adsorbent-filled membranes in pervaporation have been demonstrated by a number of studies. These applications include removal of organic co...

  8. Recycling interstellar and intergalactic material

    NASA Astrophysics Data System (ADS)

    Duc, P.-A.

    2003-06-01

    Following internal processes, such as starburst or AGN driven outflows, or environmental effects like ram-pressure stripping or collisions, galaxies may loose large amounts of stellar and gaseous material. Whereas the impact of such stripping on galaxy evolution has been well studied, much less attention has been given to the fate of the expelled material in the intergalactic/intracluster medium. Part of it will fall back on their progenitors, eventually fueling new star-formation episodes; another part will be evaporated or dispersed; injected heavy elements will enrich the ICM. Finally a fraction of the gas lost by galaxies is recycled to form a new generation of galaxies, such as the Tidal Dwarf Galaxies discovered near numerous interacting systems. Using a set of multiwavelength datacubes, we are now able to detail the processes by which these galaxies form: from an instability in the HI clouds, via in situ formation of molecular gas and further onset of star formation.

  9. Regenerable activated bauxite adsorbent alkali monitor probe

    DOEpatents

    Lee, Sheldon H. D.

    1992-01-01

    A regenerable activated bauxite adsorber alkali monitor probe for field applications to provide reliable measurement of alkali-vapor concentration in combustion gas with special emphasis on pressurized fluidized-bed combustion (PFBC) off-gas. More particularly, the invention relates to the development of a easily regenerable bauxite adsorbent for use in a method to accurately determine the alkali-vapor content of PFBC exhaust gases.

  10. Regenerable activated bauxite adsorbent alkali monitor probe

    DOEpatents

    Lee, S.H.D.

    1992-12-22

    A regenerable activated bauxite adsorber alkali monitor probe for field applications to provide reliable measurement of alkali-vapor concentration in combustion gas with special emphasis on pressurized fluidized-bed combustion (PFBC) off-gas. More particularly, the invention relates to the development of a easily regenerable bauxite adsorbent for use in a method to accurately determine the alkali-vapor content of PFBC exhaust gases. 6 figs.

  11. Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores.

    PubMed

    El-Safty, Sherif A; Shenashen, Mohamed A; Sakai, Masaru; Elshehy, Emad; Halada, Kohmei

    2015-12-06

    Developing low-cost, efficient processes for recovering and recycling palladium, gold and cobalt metals from urban mine remains a significant challenge in industrialized countries. Here, the development of optical mesosensors/adsorbents (MSAs) for efficient recognition and selective recovery of Pd(II), Au(III), and Co(II) from urban mine was achieved. A simple, general method for preparing MSAs based on using high-order mesoporous monolithic scaffolds was described. Hierarchical cubic Ia3d wagon-wheel-shaped MSAs were fabricated by anchoring chelating agents (colorants) into three-dimensional pores and micrometric particle surfaces of the mesoporous monolithic scaffolds. Findings show, for the first time, evidence of controlled optical recognition of Pd(II), Au(III), and Co(II) ions and a highly selective system for recovery of Pd(II) ions (up to ~95%) in ores and industrial wastes. Furthermore, the controlled assessment processes described herein involve evaluation of intrinsic properties (e.g., visual signal change, long-term stability, adsorption efficiency, extraordinary sensitivity, selectivity, and reusability); thus, expensive, sophisticated instruments are not required. Results show evidence that MSAs will attract worldwide attention as a promising technological means of recovering and recycling palladium, gold and cobalt metals.

  12. Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores.

    PubMed

    El-Safty, Sherif A; Shenashen, Mohamed A; Sakai, Masaru; Elshehy, Emad; Halada, Kohmei

    2015-01-01

    Developing low-cost, efficient processes for recovering and recycling palladium, gold and cobalt metals from urban mine remains a significant challenge in industrialized countries. Here, the development of optical mesosensors/adsorbents (MSAs) for efficient recognition and selective recovery of Pd(II), Au(III), and Co(II) from urban mine was achieved. A simple, general method for preparing MSAs based on using high-order mesoporous monolithic scaffolds was described. Hierarchical cubic Ia3d wagon-wheel-shaped MSAs were fabricated by anchoring chelating agents (colorants) into three-dimensional pores and micrometric particle surfaces of the mesoporous monolithic scaffolds. Findings show, for the first time, evidence of controlled optical recognition of Pd(II), Au(III), and Co(II) ions and a highly selective system for recovery of Pd(II) ions (up to ~95%) in ores and industrial wastes. Furthermore, the controlled assessment processes described herein involve evaluation of intrinsic properties (e.g., visual signal change, long-term stability, adsorption efficiency, extraordinary sensitivity, selectivity, and reusability); thus, expensive, sophisticated instruments are not required. Results show evidence that MSAs will attract worldwide attention as a promising technological means of recovering and recycling palladium, gold and cobalt metals. PMID:26709467

  13. Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores

    PubMed Central

    El-Safty, Sherif A.; Shenashen, Mohamed A.; Sakai, Masaru; Elshehy, Emad; Halada, Kohmei

    2015-01-01

    Developing low-cost, efficient processes for recovering and recycling palladium, gold and cobalt metals from urban mine remains a significant challenge in industrialized countries. Here, the development of optical mesosensors/adsorbents (MSAs) for efficient recognition and selective recovery of Pd(II), Au(III), and Co(II) from urban mine was achieved. A simple, general method for preparing MSAs based on using high-order mesoporous monolithic scaffolds was described. Hierarchical cubic Ia3d wagon-wheel-shaped MSAs were fabricated by anchoring chelating agents (colorants) into three-dimensional pores and micrometric particle surfaces of the mesoporous monolithic scaffolds. Findings show, for the first time, evidence of controlled optical recognition of Pd(II), Au(III), and Co(II) ions and a highly selective system for recovery of Pd(II) ions (up to ~95%) in ores and industrial wastes. Furthermore, the controlled assessment processes described herein involve evaluation of intrinsic properties (e.g., visual signal change, long-term stability, adsorption efficiency, extraordinary sensitivity, selectivity, and reusability); thus, expensive, sophisticated instruments are not required. Results show evidence that MSAs will attract worldwide attention as a promising technological means of recovering and recycling palladium, gold and cobaltmetals. PMID:26709467

  14. Behaviour of Recycled Coarse Aggregate Concrete: Age and Successive Recycling

    NASA Astrophysics Data System (ADS)

    Sahoo, Kirtikanta; Pathappilly, Robin Davis; Sarkar, Pradip

    2016-06-01

    Recycled Coarse Aggregate (RCA) concrete construction technique can be called as `green concrete', as it minimizes the environmental hazard of the concrete waste disposal. Indian standard recommends target mean compressive strength of the conventional concrete in terms of water cement ratio ( w/ c). The present work is an attempt to study the behaviour of RCA concrete from two samples of parent concrete having different age group with regard to the relationship of compressive strength with water cement ratios. Number of recycling may influence the mechanical properties of RCA concrete. The influence of age and successive recycling on the properties such as capillary water absorption, drying shrinkage strain, air content, flexural strength and tensile splitting strength of the RCA concrete are examined. The relationship between compressive strength at different w/ c ratios obtained experimentally is investigated for the two parameters such as age of parent concrete and successive recycling. The recycled concrete using older recycled aggregate shows poor quality. While the compressive strength reduces with successive recycling gradually, the capillary water absorption increases abruptly, which leads to the conclusion that further recycling may not be advisable.

  15. A multifunctional azobenzene-based polymeric adsorbent for effective water remediation

    NASA Astrophysics Data System (ADS)

    Wan, Decheng; Chen, Feng; Geng, Qingrui; Lu, Hang; Willcock, Helen; Liu, Qiuming; Wang, Fangyingkai; Zou, Kaidian; Jin, Ming; Pu, Hongting; Du, Jianzhong

    2014-12-01

    The efficient removal of trace carcinogenic organic pollutants, such as polycyclic aromatic hydrocarbons (PAHs) and ionic dyes, from water is an important technical challenge. We report a highly effective recyclable multifunctional azobenzene (AZ)-based silica-supported polymeric adsorbent which can simultaneously remove both PAHs and anionic dyes from water to below parts per billion (ppb) level based on multiple interactions such as the hydrophobic effect, π-π stacking and electrostatic interactions, thus providing a new strategy for designer water remediation materials.

  16. Recycled sand in lime-based mortars.

    PubMed

    Stefanidou, M; Anastasiou, E; Georgiadis Filikas, K

    2014-12-01

    The increasing awareness of the society about safe guarding heritage buildings and at the same time protecting the environment promotes strategies of combining principles of restoration with environmentally friendly materials and techniques. Along these lines, an experimental program was carried out in order to investigate the possibility of producing repair, lime-based mortars used in historic buildings incorporating secondary materials. The alternative material tested was recycled fine aggregates originating from mixed construction and demolition waste. Extensive tests on the raw materials have been performed and mortar mixtures were produced using different binding systems with natural, standard and recycled sand in order to compare their mechanical, physical and microstructure properties. The study reveals the improved behavior of lime mortars, even at early ages, due to the reaction of lime with the Al and Si constituents of the fine recycled sand. The role of the recycled sand was more beneficial in lime mortars rather than the lime-pozzolan or lime-pozzolan-cement mortars as a decrease in their performance was recorded in the latter cases due to the mortars' structure.

  17. Recycling the office - Walls and all

    SciTech Connect

    Tilsner, J.

    1993-04-26

    As the keeper of any office-supply closet can tell you, the work-place is a very wasteful environment but now, as America prepares to celebrate the 23rd Earth Day, on April 22, businesses are discovering that the three R's - recycling, reusing, and reducing - apply to a lot more than copy paper and cans from the vending machine. Today, offices use items that couldn't be recycled a few years ago. Take toner cartridges for laser printers and copiers. Even in this electronic age, paper copies are a must, so most offices go through boxloads of cartridges, which cost $100 to $130 each. But you can prevent those spent cartridges from clogging landfills and cut costs. The trick to substantially reducing waste in your office may be expanding your notion of what recycling means. For example, several companies refit, repaint, and repair old chairs, cubicles, panels, and partitions. The resulting products cost 30% to 50% less than equivalent new equipment. Obsolete computers, telephones, and other equipment that you no longer need can still be recycled. There's also a brisk secondary market for old telephone systems.

  18. OsO(4) in ionic liquid [Bmim]PF(6): a recyclable and reusable catalyst system for olefin dihydroxylation. remarkable effect of DMAP.

    PubMed

    Yao, Qingwei

    2002-06-27

    [reaction: see text] The combination of the ionic liquid [bmim]PF(6) and DMAP provides a most simple and practical approach to the immobilization of OsO(4) as catalyst for olefin dihydroxylation. Both the catalyst and the ionic liquid can be repeatedly recycled and reused in the dihydroxylation of a variety of olefins with only a very slight drop in catalyst activity. PMID:12074666

  19. OsO(4) in ionic liquid [Bmim]PF(6): a recyclable and reusable catalyst system for olefin dihydroxylation. remarkable effect of DMAP.

    PubMed

    Yao, Qingwei

    2002-06-27

    [reaction: see text] The combination of the ionic liquid [bmim]PF(6) and DMAP provides a most simple and practical approach to the immobilization of OsO(4) as catalyst for olefin dihydroxylation. Both the catalyst and the ionic liquid can be repeatedly recycled and reused in the dihydroxylation of a variety of olefins with only a very slight drop in catalyst activity.

  20. American Art of Conspicuous Recycling.

    ERIC Educational Resources Information Center

    Gomez, Aurelia

    1999-01-01

    Characterizes the use of recycling "junk" as a means for creating art by exploring various recycling traditions that are present in the United States. Demonstrates to students that "junk" can be fashioned into beautiful works of art. Offers four works of art and provides discussion questions and project ideas for each artwork. (CMK)