Science.gov

Sample records for adsorption system meeting

  1. Adsorption Refrigeration System

    SciTech Connect

    Wang, Kai; Vineyard, Edward Allan

    2011-01-01

    Adsorption refrigeration is an environmentally friendly cooling technology which could be driven by recovered waste heat or low-grade heat such as solar energy. In comparison with absorption system, an adsorption system has no problems such as corrosion at high temperature and salt crystallization. In comparison with vapor compression refrigeration system, it has the advantages of simple control, no moving parts and less noise. This paper introduces the basic theory of adsorption cycle as well as the advanced adsorption cycles such as heat and mass recovery cycle, thermal wave cycle and convection thermal wave cycle. The types, characteristics, advantages and drawbacks of different adsorbents used in adsorption refrigeration systems are also summarized. This article will increase the awareness of this emerging cooling technology among the HVAC engineers and help them select appropriate adsorption systems in energy-efficient building design.

  2. Centrifugal Adsorption Cartridge System

    NASA Technical Reports Server (NTRS)

    Gonda, Steve R.; Tsao, Yow-Min D.; Lee, Wenshan

    2004-01-01

    The centrifugal adsorption cartridge system (CACS) is an apparatus that recovers one or more bioproduct(s) from a dilute aqueous solution or suspension flowing from a bioreactor. The CACS can be used both on Earth in unit gravity and in space in low gravity. The CACS can be connected downstream from the bioreactor; alternatively, it can be connected into a flow loop that includes the bioreactor so that the liquid can be recycled. A centrifugal adsorption cartridge in the CACS (see figure) includes two concentric cylinders with a spiral ramp between them. The volume between the inner and outer cylinders, and between the turns of the spiral ramp is packed with an adsorbent material. The inner cylinder is a sieve tube covered with a gas-permeable, hydrophobic membrane. During operation, the liquid effluent from the bioreactor is introduced at one end of the spiral ramp, which then constrains the liquid to flow along the spiral path through the adsorbent material. The spiral ramp also makes the flow more nearly uniform than it would otherwise be, and it minimizes any channeling other than that of the spiral flow itself. The adsorbent material is formulated to selectively capture the bioproduct(s) of interest. The bioproduct(s) can then be stored in bound form in the cartridge or else eluted from the cartridge. The centrifugal effect of the spiral flow is utilized to remove gas bubbles from the liquid. The centrifugal effect forces the bubbles radially inward, toward and through the membrane of the inner cylinder. The gas-permeable, hydrophobic membrane allows the bubbles to enter the inner cylinder while keeping the liquid out. The bubbles that thus enter the cylinder are vented to the atmosphere. The spacing between the ramps determines rate of flow along the spiral, and thereby affects the air-bubble-removal efficiency. The spacing between the ramps also determines the length of the fluid path through the cartridge adsorbent, and thus affects the bioproduct

  3. Regenerable adsorption system

    NASA Technical Reports Server (NTRS)

    Roychoudhury, Subir (Inventor); Perry, Jay (Inventor); Walsh, Dennis (Inventor)

    2006-01-01

    A method for regenerable adsorption includes providing a substrate that defines at least one layer of ultra short channel length mesh capable of conducting an electrical current therethrough, coating at least a portion of the substrate with a desired sorbent for trace contaminant control or CO.sub.2 sorption, resistively heating the substrate, and passing a flowstream through the substrate and in contact with the sorbent.

  4. Studies on Vapor Adsorption Systems

    NASA Technical Reports Server (NTRS)

    Shamsundar, N.; Ramotowski, M.

    1998-01-01

    The project consisted of performing experiments on single and dual bed vapor adsorption systems, thermodynamic cycle optimization, and thermal modeling. The work was described in a technical paper that appeared in conference proceedings and a Master's thesis, which were previously submitted to NASA. The present report describes some additional thermal modeling work done subsequently, and includes listings of computer codes developed during the project. Recommendations for future work are provided.

  5. Physical adsorption strength in open systems.

    PubMed

    Knippenberg, M Todd; Stuart, Steven J; Cooper, Alan C; Pez, G P; Cheng, Hansong

    2006-11-23

    For a physical adsorption system, the distances of adsorbates from the surface of a substrate can vary significantly, depending on particle loading and interatomic interactions. Although the total adsorption energy is quantified easily, the normalized, per-particle adsorption energies are more ambiguous if some of these particles are far away from the surface and are interacting only weakly with the substrate. A simple analytical procedure is proposed to characterize the distance dependence of the physisorption strength and effective adsorption capacity. As an example, the method is utilized to describe H2 physisorption in a finite bundle of single-walled carbon nanotubes. PMID:17107125

  6. Carbon adsorption system protects LPG storage sphere

    SciTech Connect

    Gothenquist, C.A.; Rooker, K.M.

    1996-07-01

    Chevron U.S.A. Products Co. installed a carbon adsorption system to protect an LPG storage sphere at its refinery in Richmond, Calif. Vessel damage can result when amine contamination leads to emulsion formation and consequent amine carry-over, thus promoting wet-H{sub 2}S cracking. In Chevron`s No. 5 H{sub 2}S recovery plant, a mixture of butane and propane containing H{sub 2}S is contacted with diethanolamine (DEA) in a liquid-liquid absorber. The absorber is a countercurrent contactor with three packed beds. Because the sweetening system did not include a carbon adsorption unit for amine purification, contaminants were building up in the DEA. The contaminants comprised: treatment chemicals, hydrocarbons, foam inhibitors, and amine degradation products. The paper describes the solution to this problem.

  7. Electrical swing adsorption gas storage and delivery system

    DOEpatents

    Judkins, Roddie R.; Burchell, Timothy D.

    1999-01-01

    Systems and methods for electrical swing natural gas adsorption are described. An apparatus includes a pressure vessel; an electrically conductive gas adsorptive material located within the pressure vessel; and an electric power supply electrically connected to said adsorptive material. The adsorptive material can be a carbon fiber composite molecular sieve (CFCMS). The systems and methods provide advantages in that both a high energy density and a high ratio of delivered to stored gas are provided.

  8. Electrical swing adsorption gas storage and delivery system

    DOEpatents

    Judkins, R.R.; Burchell, T.D.

    1999-06-15

    Systems and methods for electrical swing natural gas adsorption are described. An apparatus includes a pressure vessel; an electrically conductive gas adsorptive material located within the pressure vessel; and an electric power supply electrically connected to said adsorptive material. The adsorptive material can be a carbon fiber composite molecular sieve (CFCMS). The systems and methods provide advantages in that both a high energy density and a high ratio of delivered to stored gas are provided. 5 figs.

  9. Meeting report: Signal transduction meets systems biology

    PubMed Central

    2012-01-01

    In the 21st century, systems-wide analyses of biological processes are getting more and more realistic. Especially for the in depth analysis of signal transduction pathways and networks, various approaches of systems biology are now successfully used. The EU FP7 large integrated project SYBILLA (Systems Biology of T-cell Activation in Health and Disease) coordinates such an endeavor. By using a combination of experimental data sets and computational modelling, the consortium strives for gaining a detailed and mechanistic understanding of signal transduction processes that govern T-cell activation. In order to foster the interaction between systems biologists and experimentally working groups, SYBILLA co-organized the 15th meeting “Signal Transduction: Receptors, Mediators and Genes” together with the Signal Transduction Society (STS). Thus, the annual STS conference, held from November 7 to 9, 2011 in Weimar, Germany, provided an interdisciplinary forum for research on signal transduction with a major focus on systems biology addressing signalling events in T-cells. Here we report on a selection of ongoing projects of SYBILLA and how they were discussed at this interdisciplinary conference. PMID:22546078

  10. Waste Isolation Safety Assessment Program. Task 4. Third Contractor Information Meeting. [Adsorption-desorption on geological media

    SciTech Connect

    Not Available

    1980-06-01

    The study subject of this meeting was the adsorption and desorption of radionuclides on geologic media under repository conditions. This volume contans eight papers. Separate abstracts were prepared for all eight papers. (DLC)

  11. Investigation of Microgranular Adsorptive Filtration System

    NASA Astrophysics Data System (ADS)

    Cai, Zhenxiao

    Over the past few decades, enormous advances have been made in the application of low-pressure membrane filtration to both drinking water and wastewater treatment. Nevertheless, the full potential of this technology has not been reached, due primarily to limitations imposed by membrane fouling. In drinking water treatment, much of the fouling is caused by soluble and particulate natural organic matter (NOM). Efforts to overcome the problem have focused on removal of NOM from the feed solution, usually by addition of conventional coagulants like alum and ferric chloride (FeCl3) or adsorbents like powdered activated carbon (PAC). While coagulants and adsorbents can remove a portion of the NOM, their performance with respect to fouling control has been inconsistent, often reducing fouling but sometimes having no effect or even exacerbating fouling. This research investigated microgranular adsorptive filtration (muGAF), a process that combines three existing technologies---granular media filtration, packed bed adsorption, and membrane filtration---in a novel way to reduce membrane fouling while simultaneously removing NOM from water. In this technology, a thin layer of micron-sized adsorbent particles is deposited on the membrane prior to delivering the feed to the system. The research reported here represents the first systematic study of muGAF, and the results demonstrate the promising potential of this process. A new, aluminum-oxide-based adsorbent---heated aluminum oxide particles (HAOPs)---was synthesized and shown to be very effective for NOM removal as well as fouling reduction in muGAF systems. muGAF has also been demonstrated to work well with powdered activated carbon (PAC) as the adsorbent, but not as well as when HAOPs are used; the process has also been successful when used with several different membrane types and configurations. Experiments using a wide range of operational parameters and several analytical tools lead to the conclusion that the fouling

  12. Analysis of the use of adsorption processes in trigeneration systems

    NASA Astrophysics Data System (ADS)

    Grzebielec, Andrzej; Rusowicz, Artur

    2013-12-01

    The trigeneration systems for production of cold use sorption refrigeration machines: absorption and adsorption types. Absorption systems are characterized namely by better cooling coefficient of performance, while the adsorptive systems are characterized by the ability to operate at lower temperatures. The driving heat source temperature can be as low as 60-70 °C. Such temperature of the driving heat source allows to use them in district heating systems. The article focuses on the presentation of the research results on the adsorption devices designed to work in trigeneration systems.

  13. Effect of cropping systems on adsorption of metals by soils: I. Single-metal adsorption

    SciTech Connect

    Basta, N.T.; Tabatabai, M.A. )

    1992-02-01

    The effect of long-term cropping systems on adsorption of metals was studied for soils obtained from two sites, Clarion-Webster Research Center (CWRC site) at Kanawha and Galva-Primghar Research Center (GPRC site) at Sutherland, under long-term rotation experiments in Iowa. Each experiment consisted of three cropping systems: continuous corn (CCCC), corn-soybean-corn-soybean (CSCS), and corn-oats-meadow-meadow (COMM), and treated with (+N) and without (0 N) ammoniacal fertilizer. In general, CSCS and COMM cropping systems did not significantly affect the metal adsorption maxima of soils obtained from both sites. Cadmium, Cu, and Pb adsorption were significantly correlated with pH and percentage base saturation for soils from both sites.

  14. Hybrid Vapor Compression Adsorption System: Thermal Storage Using Hybrid Vapor Compression Adsorption System

    SciTech Connect

    2012-01-04

    HEATS Project: UTRC is developing a new climate-control system for EVs that uses a hybrid vapor compression adsorption system with thermal energy storage. The targeted, closed system will use energy during the battery-charging step to recharge the thermal storage, and it will use minimal power to provide cooling or heating to the cabin during a drive cycle. The team will use a unique approach of absorbing a refrigerant on a metal salt, which will create a lightweight, high-energy-density refrigerant. This unique working pair can operate indefinitely as a traditional vapor compression heat pump using electrical energy, if desired. The project will deliver a hot-and-cold battery that provides comfort to the passengers using minimal power, substantially extending the driving range of EVs.

  15. Nucleation and interfacial adsorption in ternary systems.

    PubMed

    Philippe, T

    2015-03-01

    Nucleation is studied in incompressible ternary fluids by examining the topology of the overall landscape of the energy surface. Minimum free energy paths for nucleation (MFEPs) of a single nucleus in an infinite matrix are computed with the string method in the framework of the continuum theory of nucleation for the regular solution. Properties of the critical nucleus are compared with the predictions of the classical nucleation theory. MFEPs are found to exhibit complex nucleation pathways with non-monotonic variations of compositions in the interfacial region, specifically adsorption of a component. In the symmetric regular solution, the minority component is found to segregate at the interface during nucleation with a concomitant depletion of the nucleus core, resulting in unpredicted partition of the non-selective component. Despite increasing the gradient energy, such inhomogeneity in composition is shown to lower the nucleation barrier. PMID:25747088

  16. Design theory and performance of cryogenic molecular adsorption refrigeration systems

    NASA Technical Reports Server (NTRS)

    Hartwig, W. H.; Woltman, A. W.; Masson, J. P.

    1978-01-01

    Closed-cycle operation of molecular adsorption refrigeration systems (MARS) has been demonstrated by using thermally cycled zeolites to adsorb and desorb various gases under pressures of 20-60 atm. This paper develops three aspects of the design theory: the physical theory of molecular adsorption of small molecules such as A, N2, N2O and NH3, the design relations for closed-cycle flow for three or more compressors, and the coefficient of performance. This work is intended to demonstrate nonmechanical gas compression for various cryogenic gases than can compete with mechanical systems with a different mix of advantages and disadvantages.

  17. Adsorption Processes in Spacecraft Environmental Control and Life Support Systems

    NASA Technical Reports Server (NTRS)

    Bauman, Liese Dall; Finn, John E.; Kliss, Mark (Technical Monitor)

    1998-01-01

    The environmental control and life support system on a spacecraft must maintain a safe and comfortable environment in which the crew can live and work. The system's functions include supplying the crew with oxygen and water as well as removing carbon dioxide, water vapor, and trace contaminants from cabin air. Although open-loop systems have been used in the past, logistics and safety factors of current and future missions in space make near-complete recycling of the cabin's air and water imperative. The recycling process may include separation and reduction of carbon dioxide, removal of trace gas-phase contaminants, recovery and purification of humidity condensate, purification and polishing of wastewater streams, and other processes. Several of these operations can be performed totally or in part by adsorption processes. These processes are frequently good candidates to perform separations and purifications in space due to their gravity independence, high reliability, relatively high energy efficiency, design flexibility, technological maturity, and regenerability. For these reasons, adsorption has historically played a key role in life support on U.S. and Russian piloted spacecraft. This article focuses on three current spacecraft life support applications that often use adsorption technology: gas-phase trace contaminant control, carbon dioxide removal from cabin air, and potable water recovery from waste streams. In each application, adsorption technology has been selected for use on the International Space Station. The requirements, science, and hardware for each of these applications are discussed. Eventually, human space exploration may lead to construction of planetary habitats. These habitats may provide additional opportunities for use of adsorption processes, such as control of greenhouse gas composition, and may have different requirements and resources available to them, such as gases present in the planetary atmosphere. Adsorption separation and

  18. Adsorption processes in spacecraft environmental control and life support systems

    NASA Technical Reports Server (NTRS)

    DallBauman, L. A.; Finn, J. E.

    1999-01-01

    The environmental control and life support system on a spacecraft maintains a safe and comfortable environment in which the crew can live and work by supplying oxygen and water and by removing carbon dioxide, water vapor, and trace contaminants from cabin air. Although open-loop systems have been used successfully in the past for short-duration missions, the economics of current and future long-duration missions in space will make nearly complete recycling of air and water imperative. A variety of operations will be necessary to achieve the goal of nearly complete recycling. These include separation and reduction of carbon dioxide, removal of trace gas-phase contaminants, recovery and purification of humidity condensate, purification and polishing of wastewater streams, and others. Several of these can be performed totally or in part by adsorption processes. These processes are good candidates to perform separations and purifications in space due to their gravity independence, high reliability, relative high energy efficiency, design flexibility, technological maturity, and regenerative nature. For these reasons, adsorption has historically played a key role in life support on U.S. and Russian piloted spacecraft. Among the life support applications that can be achieved through use of adsorption technology are removal of trace contaminants and carbon dioxide from cabin air and recovery of potable water from waste streams. In each of these cases adsorption technology has been selected for use onboard the International Space Station. The requirements, science, and hardware for these applications are discussed. Human space exploration may eventually lead to construction of planetary habitats. These habitats may provide additional opportunities for use of adsorption processes, such as control of greenhouse gas composition, and may have different resources available to them, such as gases present in the planetary atmosphere. Separation and purification processes based on

  19. Adsorption processes in spacecraft environmental control and life support systems.

    PubMed

    DallBauman, L A; Finn, J E

    1999-01-01

    The environmental control and life support system on a spacecraft maintains a safe and comfortable environment in which the crew can live and work by supplying oxygen and water and by removing carbon dioxide, water vapor, and trace contaminants from cabin air. Although open-loop systems have been used successfully in the past for short-duration missions, the economics of current and future long-duration missions in space will make nearly complete recycling of air and water imperative. A variety of operations will be necessary to achieve the goal of nearly complete recycling. These include separation and reduction of carbon dioxide, removal of trace gas-phase contaminants, recovery and purification of humidity condensate, purification and polishing of wastewater streams, and others. Several of these can be performed totally or in part by adsorption processes. These processes are good candidates to perform separations and purifications in space due to their gravity independence, high reliability, relative high energy efficiency, design flexibility, technological maturity, and regenerative nature. For these reasons, adsorption has historically played a key role in life support on U.S. and Russian piloted spacecraft. Among the life support applications that can be achieved through use of adsorption technology are removal of trace contaminants and carbon dioxide from cabin air and recovery of potable water from waste streams. In each of these cases adsorption technology has been selected for use onboard the International Space Station. The requirements, science, and hardware for these applications are discussed. Human space exploration may eventually lead to construction of planetary habitats. These habitats may provide additional opportunities for use of adsorption processes, such as control of greenhouse gas composition, and may have different resources available to them, such as gases present in the planetary atmosphere. Separation and purification processes based on

  20. Exploration Systems Town Hall Meeting

    NASA Video Gallery

    Doug Cooke, Associate Administrator for NASA's Exploration Systems Mission Directorate, discusses the future during a question and answer session with employees at NASA Headquarters on April 19, 2010.

  1. NASA Docking System (NDS) Technical Integration Meeting

    NASA Technical Reports Server (NTRS)

    Lewis, James L.

    2010-01-01

    This slide presentation reviews the NASA Docking System (NDS) as NASA's implementation of the International Docking System Standard (IDSS). The goals of the NDS, is to build on proven technologies previously demonstrated in flight and to advance the state of the art of docking systems by incorporating Low Impact Docking System (LIDS) technology into the NDS. A Hardware Demonstration was included in the meeting, and there was discussion about software, NDS major system interfaces, integration information, schedule, and future upgrades.

  2. Adsorption bed models used in simulation of atmospheric control systems

    NASA Technical Reports Server (NTRS)

    Davis, S. H.

    1978-01-01

    Two separate techniques were used to obtain important basic data for the adsorption of seven liquid and eight gaseous trace contaminants. A columetric system used in previous HSC studies was modified to determine the HSC capacity of all the contaminants. A second study of six of the liquids was performed in a gas chromatorgraph. The results of these two studies are reported in two parts. First, a brief summary of the chromatographic results are given. Second, a thesis is given which reports in some detail the results of the volumetric studies. Comparison of the data that are common to both studies are also included.

  3. Building a working understanding of protein adsorption with model systems and serendipity.

    PubMed

    McGuire, Joseph

    2014-12-01

    Here we will consider a working understanding of protein adsorption to be one that is adequate for practical use. Serendipity will be considered as a resource that can be used along with model systems in order to build such a working understanding. In particular, the term refers to a preparedness on the part of the researcher to make connections between a variety of everyday inputs from sources in and outside of the main concerns of the research, and a willingness to apply those connections toward the broader utility and impact of the work. In this paper we summarize the highlights and major conclusions of our work with proteins at interfaces - gained by use of comparatively very simple experimental systems while harnessing luck as effectively as we could along the way - and its relevance to meeting challenges in biopharma and biomedical technology. PMID:25200205

  4. Hydrogen Molecule Adsorption on a Borophene-Titanium System

    NASA Astrophysics Data System (ADS)

    Ruiz-Chavarria, Gregorio

    2015-03-01

    From the synthesis of graphene have developed a wide range of researchs on their use, both theoretical and experimental. So there have been research on graphene-based electronics, but also on issues of energy, particularly hydrogen adsorption on graphene-based systems. Given the potential represented by these structures is very natural to wonder about similar structures, but based in elements near carbon. One of the lines developed very recently consider the boron as the element to build graphene-like structures. Different studies, both theoretical and experimental have been made where the studied structures are graphene type or fullerene, where boron is used in place of carbon. We will use as a starting point the proposed structures by Xiaobao and Tang. This structure is known as the borophene, which in first place will be decorated with titanium and then, this system interact with hydrogen molecule. In our calculation we use functional density theory, atomic pseudopotentials, Born approximation and molecular dynamic.

  5. Absorption and adsorption chillers applied to air conditioning systems

    NASA Astrophysics Data System (ADS)

    Kuczyńska, Agnieszka; Szaflik, Władysław

    2010-07-01

    This work presents an application possibility of sorption refrigerators driven by low temperature fluid for air conditioning of buildings. Thermodynamic models were formulated and absorption LiBr-water chiller with 10 kW cooling power as well as adsorption chiller with silica gel bed were investigated. Both of them are using water for desorption process with temperature Tdes = 80 °C. Coefficient of performance (COP) for both cooling cycles was analyzed in the same conditions of the driving heat source, cooling water Tc = 25 °C and temperature in evaporator Tevap = 5 °C. In this study, the computer software EES was used to investigate the performance of absorption heat pump system and its behaviour in configuration with geothermal heat source.

  6. Construction and measurements of a vacuum-swing-adsorption radon-mitigation system

    SciTech Connect

    Schnee, R. W.; Bunker, R.; Ghulam, G.; Jardin, D.; Kos, M.; Tenney, A. S.

    2013-08-08

    Long-lived alpha and beta emitters in the {sup 222}Rn decay chain on (and near) detector surfaces may be the limiting background in many experiments attempting to detect dark matter or neutrinoless double beta decay, and in screening detectors. In order to reduce backgrounds from radon-daughter plate-out onto the wires of the Beta Cage during its assembly, an ultra-low-radon cleanroom is being commissioned at Syracuse University using a vacuum-swing-adsorption radon-mitigation system. The radon filter shows ∼20× reduction at its output, from 7.47±0.56 to 0.37±0.12 Bq/m{sup 3}, and the cleanroom radon activity meets project requirements, with a lowest achieved value consistent with that of the filter, and levels consistently < 2 Bq/m{sup 3}.

  7. Construction and measurements of a vacuum-swing-adsorption radon-mitigation system

    NASA Astrophysics Data System (ADS)

    Schnee, R. W.; Bunker, R.; Ghulam, G.; Jardin, D.; Kos, M.; Tenney, A. S.

    2013-08-01

    Long-lived alpha and beta emitters in the 222Rn decay chain on (and near) detector surfaces may be the limiting background in many experiments attempting to detect dark matter or neutrinoless double beta decay, and in screening detectors. In order to reduce backgrounds from radon-daughter plate-out onto the wires of the Beta Cage during its assembly, an ultra-low-radon cleanroom is being commissioned at Syracuse University using a vacuum-swing-adsorption radon-mitigation system. The radon filter shows ˜20× reduction at its output, from 7.47±0.56 to 0.37±0.12 Bq/m3, and the cleanroom radon activity meets project requirements, with a lowest achieved value consistent with that of the filter, and levels consistently < 2 Bq/m3.

  8. Predicting Boron, Molybdenum, Selenium, and Arsenic Adsorption in Soil Systems

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A chemical surface complexation model was applied to boron, molybdenum, selenium, and arsenic adsorption on up to 49 soils selected for variation in soil properties. The surface complexation model was able to fit boron, molybdenum, selenite, and arsenate adsorption on the soils. General regression...

  9. Isothermal Adsorption Measurement for the Development of High Performance Solid Sorption Cooling System

    NASA Astrophysics Data System (ADS)

    Saha, Bidyut Baran; Koyama, Shigeru; Alam, K. C. Amanul; Hamamoto, Yoshinori; Akisawa, Atsushi; Kashiwagi, Takao; Ng, Kim Choon; Chua, Hui Tong

    Interest in low-grade thermal heat powered solid sorption system using natural refrigerants has been increased. However, the drawbacks of these adsorption systems are their poor performance. The objective of this paper is to improve the performance of thermally powered adsorption cooling system by selecting new adsorbent-refrigerant pairs. Adsorption capacity of adsorbent-refrigerant pair depends on the thermophysical properties (pore size, pore volume and pore diameter) of adsorbent and isothermal characteristics of the adsorbent-refrigerant pair. In this paper, the thermophysical properties of three types of silica gels and three types of pitch based activated carbon fibers are determined from the nitrogen adsorption isotherms. The standard nitrogen gas adsorption/desorption measurements on various adsorbents at liquid nitrogen of temperature 77.4 K were performed. Surface area of each adsorbent was determined by the Brunauer, Emmett and Teller (BET) plot of nitrogen adsorption data. Pore size distribution was measured by the Horvath and Kawazoe (HK) method. Adsorption/desorption isotherm results showed that all three carbon fibers have no hysteresis and had better adsorption capacity in comparison with those of silica gels.

  10. 77 FR 2343 - Eighteenth Meeting: RTCA Special Committee 216: Aeronautical Systems Security (Joint Meeting With...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-17

    ... Systems Security (Joint Meeting With EUROCAE WG-72) AGENCY: Federal Aviation Administration (FAA), U.S... Security (Joint meeting with EUROCAE WG-72). SUMMARY: The FAA is issuing this notice to advise the public... with EUROCAE WG-72). DATES: The meeting will be held February 14-17, 2012, from 9 a.m.--5...

  11. Automotive hydrogen storage system using cryo-adsorption on activated carbon.

    SciTech Connect

    Ahluwalia, R. K.; Peng, J. K.; Nuclear Engineering Division

    2009-07-01

    An integrated model of a sorbent-based cryogenic compressed hydrogen system is used to assess the prospect of meeting the near-term targets of 36 kg-H{sub 2}/m{sup 3} volumetric and 4.5 wt% gravimetric capacity for hydrogen-fueled vehicles. The model includes the thermodynamics of H{sub 2} sorption, heat transfer during adsorption and desorption, sorption dynamics, energetics of cryogenic tank cooling, and containment of H{sub 2} in geodesically wound carbon fiber tanks. The results from the model show that recoverable hydrogen, rather than excess or absolute adsorption, is a determining measure of whether a sorbent is a good candidate material for on-board storage of H{sub 2}. A temperature swing is needed to recover >80% of the sorption capacity of the superactivated carbon sorbent at 100 K and 100 bar as the tank is depressurized to 3-8 bar. The storage pressure at which the system needs to operate in order to approach the system capacity targets has been determined and compared with the breakeven pressure above which the storage tank is more compact if H{sub 2} is stored only as a cryo-compressed gas. The amount of liquid N{sub 2} needed to cool the hydrogen dispensed to the vehicle to 100 K and to remove the heat of adsorption during refueling has been estimated. The electrical energy needed to produce the requisite liquid N{sub 2} by air liquefaction is compared with the electrical energy needed to liquefy the same amount of H{sub 2} at a central plant. The alternate option of adiabatically refueling the sorbent tank with liquid H{sub 2} has been evaluated to determine the relationship between the storage temperature and the sustainable temperature swing. Finally, simulations have been run to estimate the increase in specific surface area and bulk density of medium needed to satisfy the system capacity targets with H{sub 2} storage at 100 bar.

  12. Research and Development of a Small-Scale Adsorption Cooling System

    NASA Astrophysics Data System (ADS)

    Gupta, Yeshpal

    The world is grappling with two serious issues related to energy and climate change. The use of solar energy is receiving much attention due to its potential as one of the solutions. Air conditioning is particularly attractive as a solar energy application because of the near coincidence of peak cooling loads with the available solar power. Recently, researchers have started serious discussions of using adsorptive processes for refrigeration and heat pumps. There is some success for the >100 ton adsorption systems but none exists in the <10 ton size range required for residential air conditioning. There are myriad reasons for the lack of small-scale systems such as low Coefficient of Performance (COP), high capital cost, scalability, and limited performance data. A numerical model to simulate an adsorption system was developed and its performance was compared with similar thermal-powered systems. Results showed that both the adsorption and absorption systems provide equal cooling capacity for a driving temperature range of 70--120 ºC, but the adsorption system is the only system to deliver cooling at temperatures below 65 ºC. Additionally, the absorption and desiccant systems provide better COP at low temperatures, but the COP's of the three systems converge at higher regeneration temperatures. To further investigate the viability of solar-powered heat pump systems, an hourly building load simulation was developed for a single-family house in the Phoenix metropolitan area. Thermal as well as economic performance comparison was conducted for adsorption, absorption, and solar photovoltaic (PV) powered vapor compression systems for a range of solar collector area and storage capacity. The results showed that for a small collector area, solar PV is more cost-effective whereas adsorption is better than absorption for larger collector area. The optimum solar collector area and the storage size were determined for each type of solar system. As part of this dissertation

  13. 75 FR 52969 - National Park System Advisory Board; Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-30

    ... National Park Service National Park System Advisory Board; Meeting AGENCY: National Park Service, Interior... Committee Act, 5 U.S.C. Appendix, that the National Park System Advisory Board will meet September 15-16... in the afternoon will tour park sites in the National Capital Region. On September 16, the Board...

  14. Characterization of adsorption of aqueous arsenite and arsenate onto charred dolomite in microcolumn systems.

    PubMed

    Salameh, Yousef; Al-Muhtaseb, Ala'a H; Mousa, Hasan; Walker, Gavin M; Ahmad, Mohammad N M

    2014-01-01

    In this work, the removal of arsenite, As(III), and arsenate, As(V), from aqueous solutions onto thermally processed dolomite (charred dolomite) via microcolumn was evaluated. The effects of mass of adsorbent (0.5-2 g), initial arsenic concentration (50-2000 ppb) and particle size (<0.355-2 mm) on the adsorption capacity of charred dolomite in a microcolumn were investigated. It was found that the adsorption of As(V) and As(III) onto charred dolomite exhibited a characteristic 'S' shape. The adsorption capacity increased as the initial arsenic concentration increased. A slow decrease in the column adsorption capacity was noted as the particle size increased from>0.335 to 0.710-2.00 mm. For the binary system, the experimental data show that the adsorption of As(V) and As(III) was independent of both ions in solution. The experimental data obtained from the adsorption process were successfully correlated with the Thomas Model and Bed Depth Service Time Model. PMID:25244130

  15. Systems Biology Knowledgebase (GSC8 Meeting)

    ScienceCinema

    Cottingham, Robert W [ORNL

    2016-07-12

    The Genomic Standards Consortium was formed in September 2005. It is an international, open-membership working body which promotes standardization in the description of genomes and the exchange and integration of genomic data. The 2009 meeting was an activity of a five-year funding "Research Coordination Network" from the National Science Foundation and was organized held at the DOE Joint Genome Institute with organizational support provided by the JGI and by the University of California - San Diego. Robert W. Cottingham of Oak Ridge National Laboratory discusses the DOE KnowledgeBase at the Genomic Standards Consortium's 8th meeting at the DOE JGI in Walnut Creek, Calif. on Sept. 9, 2009.

  16. Advanced Thermo-Adsorptive Battery: Advanced Thermo-Adsorptive Battery Climate Control System

    SciTech Connect

    2011-12-31

    HEATS Project: MIT is developing a low-cost, compact, high-capacity, advanced thermoadsorptive battery (ATB) for effective climate control of EVs. The ATB provides both heating and cooling by taking advantage of the materials’ ability to adsorb a significant amount of water. This efficient battery system design could offer up as much as a 30% increase in driving range compared to current EV climate control technology. The ATB provides high-capacity thermal storage with little-to-no electrical power consumption. The ATB is also looking to explore the possibility of shifting peak electricity loads for cooling and heating in a variety of other applications, including commercial and residential buildings, data centers, and telecom facilities.

  17. Adsorption kinetics and isotherm of anionic dyes onto organo-bentonite from single and multisolute systems.

    PubMed

    Shen, Dazhong; Fan, Jianxin; Zhou, Weizhi; Gao, Baoyu; Yue, Qinyan; Kang, Qi

    2009-12-15

    The performances of polydiallydimethylammonium modified bentonite (PDADMA-bentonite) as an adsorbent to remove anionic dyes, namely Acid Scarlet GR (AS-GR), Acid Turquoise Blue 2G (ATB-2G) and Indigo Carmine (IC), were investigated in single, binary and ternary dye systems. In adsorption from single dye solutions with initial concentration of 100 micromol/L, the dosage of PDADMA-bentonite needed to remove 95% dye was 0.42, 0.68 and 0.75 g/L for AS-GR, ATB-2G and IC, respectively. The adsorption isotherms of the three dyes obeyed the Langmuir isotherm model with the equilibrium constants of 0.372, 0.629 and 4.31 L/micromol, the saturation adsorption amount of 176.3, 149.2 and 228.7 micromol/g for ATB-2G, IC and AS-GR, respectively. In adsorption from mixed dye solutions, the isotherm of each individual dye followed an expanded Langmuir isotherm model and the relationship between the total amount of dyes adsorbed and the total equilibrium dye concentration was interpreted well by Langmuir isotherm model. In the region of insufficient dosage of PDADMA-bentonite, the dye with a larger affinity was preferentially removed by adsorption. Desorption was observed in the kinetic curve of the dye with lower affinity on PDADMA-bentonite surface by the competitive adsorption. The kinetics in single dye solution and the total adsorption of dyes in binary and ternary dye systems nicely followed pseudo-second-order kinetic model.

  18. Direct coupling between stress, strain and adsorption reactions - A study on coal-CO2 systems

    NASA Astrophysics Data System (ADS)

    Hol, S.; Peach, C. J.; Spiers, C. J.

    2012-12-01

    Though it is well-known that adsorption reactions frequently assist deformation of porous rocks, very little understanding exists on the direct coupling with stress state and strain. One of the materials in which adsorption plays a large role is coal, as is observed in the particular case of Enhanced Coalbed Methane Production (ECBM), which involves the geological storage of CO2 and the recovery of CH4. In this case, adsorption and the associated swelling cause significant injectivity problems, which is experienced in almost all pilot field projects to date. This suggests that indeed a strong fundamental coupling exists between CO2 sorption, changes in the mechanical state of the coal matrix and changes in the transport properties of the system, and illustrates the need to understand coupled stress-strain-sorption behaviour. In this contribution, we describe several important observations made on coal-CO2 systems that can learn us about many other natural, stressed adsorbate-adsorbent systems. In our experiments, first of all, the adsorption of CO2 in the coal matrix gave rise to swelling. Although this is well-known, we found that the total volumetric strain occurring under unconfined conditions can be realistically modelled (up to at least 100 MPa) as the sum of an adsorption-related expansion term and an elastic compression term. Second, effective in situ stresses will directly reduce the sorption capacity, and associated swelling of the coal matrix significantly. Our general thermodynamic model for the effect of a 3D stress state on adsorbed CO2 concentration supports this observation, and also shows that "self-stressing", as a result of CO2 adsorption occurring under conditions of restricted or zero strain (i.e. fully constrained conditions), will more than double the expected in situ stresses. A constitutive equation was developed to describe the full coupling between stress state, total strain (i.e. combined strain of adsorption processes and poroelasticity

  19. 75 FR 38861 - Future Systems Technology Advisory Panel Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-06

    ... From the Federal Register Online via the Government Publishing Office SOCIAL SECURITY ADMINISTRATION Future Systems Technology Advisory Panel Meeting AGENCY: Social Security Administration (SSA). ACTION: Notice of Eighth Panel Meeting. DATES: August 3, 2010, 10 a.m.-5 p.m. Location: Park Hyatt Washington DC, Hyde Park Room. ADDRESSES: 24 &...

  20. 75 FR 18566 - Future Systems Technology Advisory Panel Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-12

    ... From the Federal Register Online via the Government Publishing Office SOCIAL SECURITY ADMINISTRATION Future Systems Technology Advisory Panel Meeting AGENCY: Social Security Administration (SSA). ACTION: Notice of Seventh Panel Meeting. DATES: May 4, 2010, 9 a.m.-5 p.m. Location: Hotel Palomar, Bumham Ballroom. ADDRESSES: 117 South 17th...

  1. 76 FR 27143 - Future Systems Technology Advisory Panel Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-10

    ... From the Federal Register Online via the Government Publishing Office SOCIAL SECURITY ADMINISTRATION Future Systems Technology Advisory Panel Meeting AGENCY: Social Security Administration (SSA). ACTION: Notice of Eleventh Panel Meeting. DATES: May 24, 2011, 10 a.m.-5 p.m. Location: Hyatt Regency Crystal City, Arlington, VA, Regency B....

  2. Interpretation of dynamic frontal analysis data in solid/supercritical fluid adsorption systems. I: theory.

    PubMed

    Gritti, Fabrice; Tarafder, Abhijit; Guiochon, Georges

    2013-05-17

    A theory is proposed to relate the elution times of the adsorption front shocks of breakthrough curves recorded during classical dynamic frontal analysis (FA) experiments with selected compounds and their adsorption isotherms in solid/supercritical fluid adsorption systems. The actual density and viscosity of binary mixtures of CO2 and methanol were obtained from the NIST REPPROP software. Diluted solutions of S-naproxen were considered (<2% in mass) but the possible effects of the analyte concentration on the viscosity and the density of the eluent percolating through the column were neglected. This allows the determination of the excess adsorption isotherm (or Gibbs excess isotherm) of the adsorbed analyte in the whole column at constant mass and volumetric flow rate of pure CO2 and of the modifier solution. A local Langmuir adsorption isotherm and a constant saturation capacity were assumed in the calculations. The variation of the adsorption-desorption constant with the eluent density was taken from the experimental variation of the retention factor of S-naproxen on a chiral column packed with Whelk-O1 particles. The results show that the isotherm parameters obtained from the best adjustment of the Langmuir model to the SFC excess adsorption data deviates by less than 7% from the assumed saturation capacity and from the average of the equilibrium constant along the chromatographic column. In practice, this conclusion holds true provided that the precision of the measurement of elution times of front shocks of breakthrough curves is better than 1% and that the maximum surface coverage qexp,max/qS is at least equal to 20%.

  3. Adsorption and Processes in Spacecraft Environmental Control and Life Support Systems

    NASA Technical Reports Server (NTRS)

    Dall-Bauman, Liese; Finn, John E.; Kliss, Mark (Technical Monitor)

    1997-01-01

    The environmental control and life support system on a spacecraft must maintain a safe and comfortable environment in which the crew can live and work. The system's functions include supplying the crew with oxygen and water, as well as removing carbon dioxide, water vapor, and trace contaminants from cabin air. Although open-loop systems have been used in the past, logistics and safety factors of current and future missions in space make near-complete recycling of the cabin's air and water desirable. The recycling process may include separation and reduction of carbon dioxide, removal of trace gas-phase contaminants, recovery and purification of humidity condensate, purification and polishing of wastewater streams, and other processes. Several of these operations can be performed totally or in part by adsorption processes. Adsorption processes are frequently good candidates for separation and purification in space by virtue of such characteristics as gravity independence, high reliability, relatively high energy efficiency, design flexibility, technological maturity, and regenerability. For these reasons, adsorption has historically played a key role in life support on U.S. and Russian piloted spacecraft. This article focuses on three current spacecraft life support applications that often use adsorption technology: carbon dioxide separation from cabin air, gas-phase trace contaminant control, and potable water recovery from waste streams. In each application, adsorption technology has been selected for use on the International Space Station. The requirements, science, and hardware for each application are discussed. Eventually, human space exploration may lead to construction of planetary habitats. These habitats may have additional applications, such as control of greenhouse gas composition and purification of hydroponic solutions, and may have different requirements and resources available to them, such as gases present in the planetary atmosphere. Adsorption

  4. Phase diagrams of adsorption systems and calibration functions in the lattice-gas model.

    PubMed

    Tovbin, Yuriy K; Rabinovich, Alexander B

    2004-07-01

    Using the calibration function is suggested to increase the accuracy of approximate equations in the lattice-gas model at calculating various concentration dependences of equilibrium characteristics for nonideal adsorption systems in the vicinity of the critical point. This function should provide a shift of the approximate result to the exact one, when the lattice-gas model equations are used in the quality of the interpolation tool between the exact solutions. A comparison of approximate equations with Onsager's exact solution preferrably allows a use of the quasi-chemical approximation as the interpolation procedure and the exact information on the critical point. The modified lattice-gas model takes into account next the molecular properties of the Lennard-Jones fluid: the long-range potential of adsorbate-adsorbate, an excluded volume of the adsorption site, and a contribution of the triple interactions, as well as a softness of the lattice structure. The modified lattice-gas model with the calibration function is used for the phase diagram descriptions for argon adsorption on the homogeneous (111) CdCl2 face (two-dimensional systems) and for methane adsorption in carbon slitlike pores (three-dimensional system) as well as the other equilibrium characteristics of mentioned systems.

  5. Regeneration of Exhausted Arsenic Adsorptive media of a Full Scale Treatment System

    EPA Science Inventory

    This presentation will describe the method and results of laboratory tests showing the feasibility of regenerating exhausted, iron-based, adsorptive media and the results of a follow up regeneration test at a full scale system in Twentynine Palms CA. The laboratory studies on se...

  6. 76 FR 4146 - Future Systems Technology Advisory Panel Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-24

    ... From the Federal Register Online via the Government Publishing Office SOCIAL SECURITY ADMINISTRATION Future Systems Technology Advisory Panel Meeting AGENCY: Social Security Administration (SSA... provide the Commissioner of Social Security independent advice and recommendations on the future...

  7. Phosphate adsorption from wastewater using zirconium (IV) hydroxide: Kinetics, thermodynamics and membrane filtration adsorption hybrid system studies.

    PubMed

    Johir, M A H; Pradhan, M; Loganathan, P; Kandasamy, J; Vigneswaran, S

    2016-02-01

    Excessive phosphate in wastewater should be removed to control eutrophication of water bodies. The potential of employing amorphous zirconium (Zr) hydroxide to remove phosphate from synthetic wastewater was studied in batch adsorption experiments and in a submerged membrane filtration adsorption hybrid (MFAH) reactor. The adsorption data satisfactorily fitted to Langmuir, pseudo-first order and pseudo-second order models. Langmuir adsorption maxima at 22 °C and pHs of 4.0, 7.1, and 10.0 were 30.40, 18.50, and 19.60 mg P/g, respectively. At pH 7.1 and temperatures of 40 °C and 60 °C, they were 43.80 and 54.60 mg P/g, respectively. The thermodynamic parameters, ΔG° and ΔS° were negative and ΔH° was positive. FTIR, zeta potential and competitive phosphate, sulphate and nitrate adsorption data showed that the mechanism of phosphate adsorption was inner-sphere complexation. In the submerged MFAH reactor experiment, when Zr hydroxide was added at doses of 1-5 g/L once only at the start of the experiment, the removal of phosphate from 3 L of wastewater containing 10 mg P/L declined after 5 h of operation. However, when Zr hydroxide was repeatedly added at 5 g/L dose every 24 h, satisfactory removal of phosphate was maintained for 3 days.

  8. Phosphate adsorption from wastewater using zirconium (IV) hydroxide: Kinetics, thermodynamics and membrane filtration adsorption hybrid system studies.

    PubMed

    Johir, M A H; Pradhan, M; Loganathan, P; Kandasamy, J; Vigneswaran, S

    2016-02-01

    Excessive phosphate in wastewater should be removed to control eutrophication of water bodies. The potential of employing amorphous zirconium (Zr) hydroxide to remove phosphate from synthetic wastewater was studied in batch adsorption experiments and in a submerged membrane filtration adsorption hybrid (MFAH) reactor. The adsorption data satisfactorily fitted to Langmuir, pseudo-first order and pseudo-second order models. Langmuir adsorption maxima at 22 °C and pHs of 4.0, 7.1, and 10.0 were 30.40, 18.50, and 19.60 mg P/g, respectively. At pH 7.1 and temperatures of 40 °C and 60 °C, they were 43.80 and 54.60 mg P/g, respectively. The thermodynamic parameters, ΔG° and ΔS° were negative and ΔH° was positive. FTIR, zeta potential and competitive phosphate, sulphate and nitrate adsorption data showed that the mechanism of phosphate adsorption was inner-sphere complexation. In the submerged MFAH reactor experiment, when Zr hydroxide was added at doses of 1-5 g/L once only at the start of the experiment, the removal of phosphate from 3 L of wastewater containing 10 mg P/L declined after 5 h of operation. However, when Zr hydroxide was repeatedly added at 5 g/L dose every 24 h, satisfactory removal of phosphate was maintained for 3 days. PMID:26686069

  9. Adsorption Behaviors of 17α-Ethinylestradiol in Sediment-Water System in Northern Taihu Lake, China

    PubMed Central

    Wang, Yonghua; Hu, Liangfeng; Wang, Qiuying; Lu, Guanghua; Li, Yi

    2014-01-01

    Adsorption behavior of 17α-ethinylestradiol (EE2) in northern Taihu Lake sediment was analyzed by using batch equilibrium experiment. Freundlich isotherm could describe the adsorption thermodynamic behavior of EE2 in sediment. Sediment organic matter (SOM) contents had important impacts on the adsorption capacity for EE2. The pH values also influenced the adsorption capacity for EE2. Increase of pH value could decrease the EE2 adsorption, which might be due to the electrostatic repulsion between the anionic form of EE2 and sediments with negative charge under high pH values. Competitive effects of bisphenol A (BPA) on EE2 adsorption were further analyzed. The results showed that low concentration BPA did not have significant influences on EE2 adsorption. However, high concentration BPA could reduce EE2 adsorption, which might be due to the similar molecular diameter of BPA with adsorption sites and one more benzene ring with a hydroxyl group in BPA. These results provide primary information of EE2 adsorption in sediment-water system in Taihu Lake, which is useful for the environmental risk assessment and management of EE2 in studied area. PMID:25152910

  10. Laboratory systems evolve to meet data demands.

    PubMed

    Bazzoli, F

    1999-11-01

    As provider organizations consolidate and confront managed care pressures, they're looking for laboratory information systems that go beyond the basics. They want lab systems that can integrate with other computer systems, make data available at the point of care, and exchange information over the Internet or intranets. Systems integration efforts, however, are proving troublesome for some CIOs.

  11. Meetings

    NASA Astrophysics Data System (ADS)

    As the first Meeting Chairman for the Spring and Fall meetings, Martin Walt has achieved notable success in realizing the many goals set forth by the Union for its annual meetings. Under his guidance, the Meeting Program Committee has been able to reduce the number of conflicting sessions and provide for the presentation of well-organized and effectively displayed poster sessions. The early planning of Union sessions and the introduction of ‘mini-frontiers,’ along with careful scheduling, has provided an increased opportunity for participation. A record high of 2785 registrants was recorded during the 1981 Fall Meeting, topping very slightly the old record of 2775 for the 1974 Spring Meeting.

  12. Scattering, Adsorption, and Langmuir-Hinshelwood Desorption Models for Physisorptive and Chemisorptive Gas-Surface Systems

    NASA Astrophysics Data System (ADS)

    Bentley, Brook I.

    Surface effects limit the performance of hypersonic vehicles, micro-electro-mechanical devices, and directed energy systems. This research develops methods to predict adsorption, scattering, and thermal desorption of molecules on a surface. These methods apply to physisorptive (adsorption and scattering) and chemisorptive (thermal desorption) gas-surface systems. Engineering and design applications will benefit from these methods, hence they are developed under the Direct Simulation Monte Carlo construct. The novel adsorption and scattering contribution, the Modified Kisliuk with Scattering method, predicts angular and energy distributions, and adsorption probabilities. These results agree more closely with experiment than the state-of-the-art Cercignani-Lampis-Lord scattering kernel. Super-elastic scattering is predicted. Gas-adlayer interactions are included for the first time. Accommodation coefficents can be determined by fitting simulations to experimental data. The new thermal desorption model accurately calculates angular, translational, rotational, and vibrational distributions, and the rotational alignment parameter. The model is validated by comparing with experiments. Multiple transition states are considered in a set of non-dimensionalized equations of motion, linked with temporally-accurate event timing. Initial conditions are chosen from a new truncated Maxwell-Boltzmann distribution. Run times are improved by eliminating the Gaussian Weighting of desorbing products. The absorption energy barrier is shown to significantly contribute only to the translational energy of desorbing molecules by contributing energy to each adatom in a similar manner.

  13. Environment-modulated Kondo phenomena in FePc/Au(111) adsorption systems

    NASA Astrophysics Data System (ADS)

    Wang, Yu; Zheng, Xiao; Yang, Jinlong

    2016-03-01

    Recent scanning tunneling microscopy experiments on electron transport through iron(II) phthalocyanine (FePc) molecules adsorbed on the Au(111) surface have revealed that the measured Kondo conductance signature depends strongly on the specific adsorption site. To understand the physical origin of experimental observations, particularly the variation of Kondo features with the molecular adsorption site, we employ a combined density functional theory (DFT) and hierarchical equations of motion (HEOM) approach to investigate the electronic structure and Kondo correlation in FePc/Au(111) composite systems. The calculation results indicate that, for the on-top adsorption configuration, the two degenerate spin-unpaired dπ orbitals on the Fe center are coupled indirectly through substrate band states, leading to the Fano-like antiresonance line shape in the d I /d V spectra, while for the bridge adsorption configuration, the environment-induced couplings are largely suppressed because of the two different spin-unpaired d orbitals. Therefore, our work suggests that the environment-induced coupling as an essential physical factor could greatly influence the Fano-Kondo features in magnetic molecule/metal composites, and the crucial role of local orbital degeneracy and symmetry is discovered. These findings provide important insights into the electron correlation effects in complex solid-state systems. The usefulness and practicality of the combined DFT+HEOM method is also highlighted.

  14. 75 FR 1446 - Future Systems Technology Advisory Panel Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-11

    ... ADMINISTRATION Future Systems Technology Advisory Panel Meeting AGENCY: Social Security Administration (SSA... independent advice and recommendations on the future of systems technology and electronic services at the... what future systems technologies may be developed to assist in carrying out its statutory...

  15. 75 FR 67804 - Future Systems Technology Advisory Panel Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-03

    ... ADMINISTRATION Future Systems Technology Advisory Panel Meeting AGENCY: Social Security Administration (SSA... Security independent advice and recommendations on the future of systems technology and electronic services... determining what future systems technologies may be developed to assist in carrying out its statutory...

  16. 2010 Atmospheric System Research (ASR) Science Team Meeting Summary

    SciTech Connect

    Dupont, DL

    2011-05-04

    This document contains the summaries of papers presented in poster format at the March 2010 Atmospheric System Research Science Team Meeting held in Bethesda, Maryland. More than 260 posters were presented during the Science Team Meeting. Posters were sorted into the following subject areas: aerosol-cloud-radiation interactions, aerosol properties, atmospheric state and surface, cloud properties, field campaigns, infrastructure and outreach, instruments, modeling, and radiation. To put these posters in context, the status of ASR at the time of the meeting is provided here.

  17. JANNAF 18th Propulsion Systems Hazards Subcommittee Meeting. Volume 1

    NASA Technical Reports Server (NTRS)

    Cocchiaro, James E. (Editor); Gannaway, Mary T. (Editor)

    1999-01-01

    This volume, the first of two volumes is a compilation of 18 unclassified/unlimited-distribution technical papers presented at the Joint Army-Navy-NASA-Air Force (JANNAF) 18th Propulsion Systems Hazards Subcommittee (PSHS) meeting held jointly with the 36th Combustion Subcommittee (CS) and 24th Airbreathing Propulsion Subcommittee (APS) meetings. The meeting was held 18-21 October 1999 at NASA Kennedy Space Center and The DoubleTree Oceanfront Hotel, Cocoa Beach, Florida. Topics covered at the PSHS meeting include: shaped charge jet and kinetic energy penetrator impact vulnerability of gun propellants; thermal decomposition and cookoff behavior of energetic materials; violent reaction; detonation phenomena of solid energetic materials subjected to shock and impact stimuli; and hazard classification, insensitive munitions, and propulsion systems safety.

  18. JANNAF 19th Propulsion Systems Hazards Subcommittee Meeting. Volume 1

    NASA Technical Reports Server (NTRS)

    Cocchiaro, James E. (Editor); Kuckels, Melanie C. (Editor)

    2000-01-01

    This volume, the first of two volumes is a compilation of 25 unclassified/unlimited-distribution technical papers presented at the Joint Army-Navy-NASA-Air Force (JANNAF) 19th Propulsion Systems Hazards Subcommittee (PSHS) meeting held jointly with the 37th Combustion Subcommittee (CS) and 25th Airbreathing Propulsion Subcommittee (APS), and 1st Modeling and Simulation Subcommittee (MSS) meetings. The meeting was held 13-17 November 2000 at the Naval Postgraduate School and Hyatt Regency Hotel, Monterey, California. Topics covered at the PSHS meeting include: impact and thermal vulnerability of gun propellants; thermal decomposition and cookoff behavior of energetic materials; violent reaction and detonation phenomena of solid energetic materials subjected to shock and impact loading; and hazard classification, and insensitive munitions testing of propellants and propulsion systems.

  19. Study on the irreversible thermodynamics of a marine engine exhaust-powered adsorption refrigerating system

    NASA Astrophysics Data System (ADS)

    Xie, Yingchun; Mei, Ning; Xu, Zhen

    2006-04-01

    This study investigates the heat and mass transfer mechanism of a marine engine exhaust-powered adsorption refrigerating system by using irreversible thermodynamics. The equations of entropy-production rate and the linear phenomenological equations of thermodynamic flux and force are established. The conventional experimental facilities of unit tube are developed and the phenomenological coefficients are obtained by fitting the experimental data. It is concluded that the thermodynamic process in the adsorbent bed is determined by the coupling effect of the heat and mass transfer; furthermore, the mass transfer is determined by the heat transfer. Taking some measures to increase heat transfer can improve the performance of the adsorption refrigerating system. The conclusions presented in this paper may be of value to the engineering applications of the system.

  20. Adsorption of doxorubicin on citrate-capped gold nanoparticles: insights into engineering potent chemotherapeutic delivery systems

    NASA Astrophysics Data System (ADS)

    Curry, Dennis; Cameron, Amanda; MacDonald, Bruce; Nganou, Collins; Scheller, Hope; Marsh, James; Beale, Stefanie; Lu, Mingsheng; Shan, Zhi; Kaliaperumal, Rajendran; Xu, Heping; Servos, Mark; Bennett, Craig; Macquarrie, Stephanie; Oakes, Ken D.; Mkandawire, Martin; Zhang, Xu

    2015-11-01

    Gold nanomaterials have received great interest for their use in cancer theranostic applications over the past two decades. Many gold nanoparticle-based drug delivery system designs rely on adsorbed ligands such as DNA or cleavable linkers to load therapeutic cargo. The heightened research interest was recently demonstrated in the simple design of nanoparticle-drug conjugates wherein drug molecules are directly adsorbed onto the as-synthesized nanoparticle surface. The potent chemotherapeutic, doxorubicin often serves as a model drug for gold nanoparticle-based delivery platforms; however, the specific interaction facilitating adsorption in this system remains understudied. Here, for the first time, we propose empirical and theoretical evidence suggestive of the main adsorption process where (1) hydrophobic forces drive doxorubicin towards the gold nanoparticle surface before (2) cation-π interactions and gold-carbonyl coordination between the drug molecule and the cations on AuNP surface facilitate DOX adsorption. In addition, biologically relevant compounds, such as serum albumin and glutathione, were shown to enhance desorption of loaded drug molecules from AuNP at physiologically relevant concentrations, providing insight into the drug release and in vivo stability of such drug conjugates.Gold nanomaterials have received great interest for their use in cancer theranostic applications over the past two decades. Many gold nanoparticle-based drug delivery system designs rely on adsorbed ligands such as DNA or cleavable linkers to load therapeutic cargo. The heightened research interest was recently demonstrated in the simple design of nanoparticle-drug conjugates wherein drug molecules are directly adsorbed onto the as-synthesized nanoparticle surface. The potent chemotherapeutic, doxorubicin often serves as a model drug for gold nanoparticle-based delivery platforms; however, the specific interaction facilitating adsorption in this system remains understudied

  1. Adsorption and bioaccessibility of phenanthrene on carbon nanotubes in the in vitro gastrointestinal system.

    PubMed

    Li, Wei; Zhao, Jian; Zhao, Qing; Zheng, Hao; Du, Peng; Tao, Shu; Xing, Baoshan

    2016-10-01

    Adsorption and bioaccessibility of phenanthrene on graphite and multiwalled carbon nanotubes (CNTs) were investigated in simulated gastrointestinal fluid using a passive dosing system. The saturated adsorption capacity of phenanthrene on different adsorbents follows an order of hydroxylated CNTs (H-CNTs)>carboxylated CNTs (C-CNTs)>graphitized CNTs (G-CNTs)>graphite, consistent with the order of their surface area and micropore volume. The change of phenanthrene adsorption on the adsorbents is different with the presence of pepsin (800mg/L) and bile salts (500mg/L and 5000mg/L, abbreviated as BS500 and BS5000). Both solubilization of phenanthrene by pepsin and bile salts and their competition with phenanthrene for the adsorption sites play a role. In addition, the large increase of the maximum adsorption capacity in BS5000 solution indicates an enhanced dispersion of CNTs or an exfoliation of graphite by bile salts, which consequently increases the exposed surface area. The bioaccessibility increases in pepsin and BS500 solution with a growing free phenanthrene concentration. Although the bioaccessibility of phenanthrene stalls or slightly decreases in the middle range of free phenanthrene concentration in BS5000 solution, the bioaccessibility overall is much higher than that in pepsin and BS500 solution at the same phenanthrene level. It is impossible to separate the effect of competition from dispersion (or exfoliation) at this stage, but the relative contribution of solubilization to phenanthrene desorption in pepsin and BS500 solutions was quantified, which improves our understanding of the mechanisms on bioaccessibility of adsorbed pollutants on CNTs. PMID:27213670

  2. Biodegradation of persistent organics can overcome adsorption-desorption hysteresis in biological activated carbon systems.

    PubMed

    Abromaitis, V; Racys, V; van der Marel, P; Meulepas, R J W

    2016-04-01

    In Biological Activated Carbon (BAC) systems, persistent organic pollutants can be removed through a combination of adsorption, desorption and biodegradation. These processes might be affected by the presence of other organics, especially by the more abundant easily-biodegradable organics, like acetate. In this research these relations are quantified for the removal of the persistent pharmaceutical metoprolol. Acetate did not affect the adsorption and desorption of metoprolol, but it did greatly enhance the metoprolol biodegradation. At least part of the BAC biomass growing on acetate was also able to metabolise metoprolol, although metoprolol was only converted after the acetate was depleted. The presence of easily-degradable organics like acetate in the feeding water is therefore beneficial for the removal of metoprolol in BAC systems. The isotherms obtained from metoprolol adsorption and desorption experiments showed that BAC systems are subject to hysteresis; for AC bioregeneration to take place the microbial biomass has to reduce the concentration at the AC-biomass interface 2.7 times compared to the concentration at which the carbon was being loaded. However, given the threshold concentration of the MET degrading microorganisms (<0.08 μg/L) versus the average influent concentration (1.3 μg/L), bioregeneration is feasible.

  3. Adsorption of high salinity surfactant systems and sacrificial agents for EOR on model adsorbents

    SciTech Connect

    Volz, H.V.

    1988-05-01

    In chemical flooding processes for enhanced oil recovery, chemical adsorption is a major factor which may limit the applicability of these processes. Under typical high salinity conditions of West German oil reservoirs (100 to 200 kg/m/sup 3/ of total dissolved solids) adsorption experiments with single and multi-component surfactant systems and with and without the use of sacrificial agents on model adsorbents were carried out, adsorbents being calcium benetonite, illite, kaolinite, dickite, prochlorite, and quartz. It can be shown that polyethylene glycols of appropriate molecular weight, which were used as sacrificial agents, adsorb specifically on calcium bentonite or quartz, whereas on kaolnite they form an adsorbing complex together with the surfactant. Based on experimental results specific coverages of sacrificial agents and surfactants are calculated.

  4. Removal of humic and tannic acids by adsorption-coagulation combined systems with activated biochar.

    PubMed

    Jung, Chanil; Phal, Narong; Oh, Jeill; Chu, Kyoung Hoon; Jang, Min; Yoon, Yeomin

    2015-12-30

    Despite recent interest in transforming biomass into bio-oil and syngas, there is inadequate information on the compatibility of byproducts (e.g., biochar) with agriculture and water purification infrastructures. A pyrolysis at 300°C yields efficient production of biochar, and its physicochemical properties can be improved by chemical activation, resulting in a suitable adsorbent for the removal of natural organic matter (NOM), including hydrophobic and hydrophilic substances, such as humic acids (HA) and tannic acids (TA), respectively. In this study, the adsorption affinities of different HA and TA combinations in NOM solutions were evaluated, and higher adsorption affinity of TA onto activated biochar (AB) produced in the laboratory was observed due to its superior chemisorption tendencies and size-exclusion effects compared with that of HA, whereas hydrophobic interactions between adsorbent and adsorbate were deficient. Assessment of the AB role in an adsorption-coagulation hybrid system as nuclei for coagulation in the presence of aluminum sulfate (alum) showed a synergistic effect in a HA-dominated NOM solution. An AB-alum hybrid system with a high proportion of HA in the NOM solution may be applicable as an end-of-pipe solution.

  5. Removal of humic and tannic acids by adsorption-coagulation combined systems with activated biochar.

    PubMed

    Jung, Chanil; Phal, Narong; Oh, Jeill; Chu, Kyoung Hoon; Jang, Min; Yoon, Yeomin

    2015-12-30

    Despite recent interest in transforming biomass into bio-oil and syngas, there is inadequate information on the compatibility of byproducts (e.g., biochar) with agriculture and water purification infrastructures. A pyrolysis at 300°C yields efficient production of biochar, and its physicochemical properties can be improved by chemical activation, resulting in a suitable adsorbent for the removal of natural organic matter (NOM), including hydrophobic and hydrophilic substances, such as humic acids (HA) and tannic acids (TA), respectively. In this study, the adsorption affinities of different HA and TA combinations in NOM solutions were evaluated, and higher adsorption affinity of TA onto activated biochar (AB) produced in the laboratory was observed due to its superior chemisorption tendencies and size-exclusion effects compared with that of HA, whereas hydrophobic interactions between adsorbent and adsorbate were deficient. Assessment of the AB role in an adsorption-coagulation hybrid system as nuclei for coagulation in the presence of aluminum sulfate (alum) showed a synergistic effect in a HA-dominated NOM solution. An AB-alum hybrid system with a high proportion of HA in the NOM solution may be applicable as an end-of-pipe solution. PMID:26340547

  6. Adsorption calorimetry and enhanced oil recovery: Three component systems, topical report. [Decyltrimethylammonium bromide/water/sodium bromide methanol/toluene/n-heptane

    SciTech Connect

    Noll, L.A.

    1988-03-01

    One objective of this project is to determine the adsorptive losses of EOR chemicals on minerals in a systematic manner and expand adsorption models for incorporation as an adsorption module into chemical flooding simulators. The Woodbury-Noll adsorption model was developed which fits both amount and heat of adsorption simultaneously. Two ternary systems were selected with a view to extending the Woodbury-Noll adsorption model to these systems. In the first of these systems, DTAB/NaBr/H20/silica, competitive effects are not present. In the second system, methanol/toluene/heptane/silica, competitive adsoprtion is present. Flow adsorption calorimetry was carried out on these ternary systems and on their respective binaries. Adsorption calorimetry of DTAB from solutions with added electrolyte showed that the heat and the amount of adsorption increased when the salt content was raised to 3 percent, being approximately constant thereafter. However, the increase in salinity above this amount moved the plateau region to lower surfactant concentrations. Adsorption of DTAB at 45)degree)C resulted in lower adsorption than at 25)degree)C, but the heat release was only slightly lower. The heat and amount of adsorption of methanol from heptane onto silica are both markedly reduced by the presence of toluene in the solution. Densities of the surfactant solutions and of the binaries of methanol/toluene/heptane system are reported. 6 refs., 20 figs., 13 tabs.

  7. Evaluation of an adsorption system to concentrate VOC in air streams prior to catalytic incineration.

    PubMed

    Campesi, María A; Luzi, Carlos D; Barreto, Guillermo F; Martínez, Osvaldo M

    2015-05-01

    Catalytic combustion is a well-developed process for the removal of volatile organic compounds (VOCs). In order to reduce both the amount of catalyst needed for incineration and the surface area of recuperative heat exchangers, an evaluation of the use of thermal swing adsorption as a previous step for VOC concentration is made. An air stream containing ethyl acetate and ethanol (employed as solvents in printing processes) has been taken as a case study. Based on the characteristics of the adsorption/desorption system and the properties of the stream to be treated, a monolithic rotor concentrator with activated carbon as adsorbent material is adopted. Once the temperature of the inlet desorption stream TD is chosen, the minimum possible desorption flow rate, WD,min, and the amount of adsorbent material can be properly defined according to the extent of the Mass Transfer Zone (MTZ) at the end of the adsorption stage. An approximate procedure to speed up the calculations needed for sizing the bed and predicting the operating variables is also presented. In the case studied here, the concentration of the VOC stream can reach 6 times that of the primary effluent when TD = 200 °C is chosen.

  8. Experimental study on activated carbon-nitrogen pair in a prototype pressure swing adsorption refrigeration system

    NASA Astrophysics Data System (ADS)

    Anupam, Kumar; Palodkar, Avinash V.; Halder, G. N.

    2016-04-01

    Pressure swing adsorption of nitrogen onto granular activated carbon in the single-bed adsorber-desorber chamber has been studied at six different pressures 6-18 kgf/cm2 to evaluate their performance as an alternative refrigeration technique. Refrigerating effect showed a linear rise with an increase in the operating pressure. However, the heat of adsorption and COP exhibited initial rise with the increasing operating pressure but decreased later after reaching a maximum value. The COP initially increases with operating pressures however, with the further rise of operating pressure it steadily decreased. The highest average refrigeration, maximum heat of adsorption and optimum coefficient of performance was evaluated to be 415.38 W at 18 kgf/cm2, 92756.35 J at 15 kgf/cm2 and 1.32 at 12 kgf/cm2, respectively. The system successfully produced chilled water at 1.7 °C from ambient water at 28.2 °C.

  9. Evaluation of an adsorption system to concentrate VOC in air streams prior to catalytic incineration.

    PubMed

    Campesi, María A; Luzi, Carlos D; Barreto, Guillermo F; Martínez, Osvaldo M

    2015-05-01

    Catalytic combustion is a well-developed process for the removal of volatile organic compounds (VOCs). In order to reduce both the amount of catalyst needed for incineration and the surface area of recuperative heat exchangers, an evaluation of the use of thermal swing adsorption as a previous step for VOC concentration is made. An air stream containing ethyl acetate and ethanol (employed as solvents in printing processes) has been taken as a case study. Based on the characteristics of the adsorption/desorption system and the properties of the stream to be treated, a monolithic rotor concentrator with activated carbon as adsorbent material is adopted. Once the temperature of the inlet desorption stream TD is chosen, the minimum possible desorption flow rate, WD,min, and the amount of adsorbent material can be properly defined according to the extent of the Mass Transfer Zone (MTZ) at the end of the adsorption stage. An approximate procedure to speed up the calculations needed for sizing the bed and predicting the operating variables is also presented. In the case studied here, the concentration of the VOC stream can reach 6 times that of the primary effluent when TD = 200 °C is chosen. PMID:25734958

  10. Analysis of the adsorption process and of desiccant cooling systems: a pseudo- steady-state model for coupled heat and mass transfer. [DESSIM, DESSIM2, DESSIM4

    SciTech Connect

    Barlow, R.S.

    1982-12-01

    A computer model to simulate the adiabatic adsorption/desorption process is documented. Developed to predict the performance of desiccant cooling systems, the model has been validated through comparison with experimental data for single-blow adsorption and desorption. A literature review on adsorption analysis, detailed discussions of the adsorption process, and an initial assessment of the potential for performance improvement through advanced component development are included.

  11. Performance of an electrothermal swing adsorption system with postdesorption liquefaction for organic gas capture and recovery.

    PubMed

    Mallouk, Kaitlin E; Rood, Mark J

    2013-07-01

    The use of adsorption on activated carbon fiber cloth (ACFC) followed by electrothermal swing adsorption (ESA) and postdesorption pressure and temperature control allows organic gases with boiling points below 0 °C to be captured from air streams and recovered as liquids. This technology has the potential to be a more sustainable abatement technique when compared to thermal oxidation. In this paper, we determine the process performance and energy requirements of a gas recovery system (GRS) using ACFC-ESA for three adsorbates with relative pressures between 8.3 × 10(-5) and 3.4 × 10(-3) and boiling points as low as -26.3 °C. The GRS is able to capture > 99% of the organic gas from the feed air stream, which is comparable to destruction efficiencies for thermal oxidizers. The energy used per liquid mole recovered ranges from 920 to 52,000 kJ/mol and is a function of relative pressure of the adsorbate in the feed gas. Quantifying the performance of the bench-scale gas recovery system in terms of its ability to remove organic gases from the adsorption stream and the energy required to liquefy the recovered organic gases is a critical step in developing new technologies to allow manufacturing to occur in a more sustainable manner. To our knowledge, this is the first time an ACFC-ESA system has been used to capture, recover, and liquefy organic compounds with vapor pressures as low as 8.3 × 10(-5) and the first time such a system has been analyzed for process performance and energy consumption. PMID:23789711

  12. Performance of an electrothermal swing adsorption system with postdesorption liquefaction for organic gas capture and recovery.

    PubMed

    Mallouk, Kaitlin E; Rood, Mark J

    2013-07-01

    The use of adsorption on activated carbon fiber cloth (ACFC) followed by electrothermal swing adsorption (ESA) and postdesorption pressure and temperature control allows organic gases with boiling points below 0 °C to be captured from air streams and recovered as liquids. This technology has the potential to be a more sustainable abatement technique when compared to thermal oxidation. In this paper, we determine the process performance and energy requirements of a gas recovery system (GRS) using ACFC-ESA for three adsorbates with relative pressures between 8.3 × 10(-5) and 3.4 × 10(-3) and boiling points as low as -26.3 °C. The GRS is able to capture > 99% of the organic gas from the feed air stream, which is comparable to destruction efficiencies for thermal oxidizers. The energy used per liquid mole recovered ranges from 920 to 52,000 kJ/mol and is a function of relative pressure of the adsorbate in the feed gas. Quantifying the performance of the bench-scale gas recovery system in terms of its ability to remove organic gases from the adsorption stream and the energy required to liquefy the recovered organic gases is a critical step in developing new technologies to allow manufacturing to occur in a more sustainable manner. To our knowledge, this is the first time an ACFC-ESA system has been used to capture, recover, and liquefy organic compounds with vapor pressures as low as 8.3 × 10(-5) and the first time such a system has been analyzed for process performance and energy consumption.

  13. A Case Study of a Low Power Vapour Adsorption Refrigeration System

    NASA Astrophysics Data System (ADS)

    Dinesh, Banala; Sai Manikanta, M.; Dishal Kumar, T.; Sahu, Debjyoti

    2016-09-01

    Industrial refrigeration is one of the most energy consuming sector. In conventional Vapor Compression refrigeration system, compressor is the major power consuming element. Vapor Adsorption refrigeration system is one of the best replacement for the Vapor Compression refrigeration system. Our main objective is to analyze, design and develop a Vapor Adsorption refrigeration system which is cost effective and environmental friendly. A prototype model that is capable of producing a temperature drop in closed evaporator chamber was designed, fabricated and tested. Activated carbon/Methanol pair is chosen as Adsorbent/Refrigerant pair. The system is analyzed in ANSYS 14.5 using the inlet conditions obtained from the experimental setup. The performances and effectiveness of the unit was studied by determining Refrigeration Effect (RE), Coefficient of Performance (COP) and explaining operational issues of the unit. The results obtained from the analysis and experiments have marginal difference in COP i.e. with an error percentage of 5.94%. The overall COP obtained is 0.34 through experiments and from analysis the COP obtained is approximately 0.32.

  14. JANNAF 17th Propulsion Systems Hazards Subcommittee Meeting. Volume 1

    NASA Technical Reports Server (NTRS)

    Cocchiaro, James E. (Editor); Gannaway, Mary T. (Editor); Rognan, Melanie (Editor)

    1998-01-01

    Volume 1, the first of two volumes is a compilation of 16 unclassified/unlimited technical papers presented at the 17th meeting of the Joint Army-Navy-NASA-Air Force (JANNAF) Propulsion Systems Hazards Subcommittee (PSHS) held jointly with the 35th Combustion Subcommittee (CS) and Airbreathing Propulsion Subcommittee (APS). The meeting was held on 7 - 11 December 1998 at Raytheon Systems Company and the Marriott Hotel, Tucson, AZ. Topics covered include projectile and shaped charge jet impact vulnerability of munitions; thermal decomposition and cookoff behavior of energetic materials; damage and hot spot initiation mechanisms with energetic materials; detonation phenomena of solid energetic materials; and hazard classification, insensitive munitions, and propulsion systems safety.

  15. 78 FR 22024 - Twenty First Meeting: RTCA Special Committee 216, Aeronautical Systems Security (Joint Meeting...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-12

    ... Security (Joint Meeting With EUROCAE WG-72) AGENCY: Federal Aviation Administration (FAA), U.S. Department... Security (Joint Meeting with EUROCAE WG-72). SUMMARY: The FAA is issuing this notice to advise the public... Meeting with EUROCAE WG-72). DATES: The meeting will be held May 13-17, 2013, from 9:00 a.m.-5:00 p.m....

  16. Simulation of hydrogen adsorption systems adopting the flow through cooling concept

    SciTech Connect

    Corgnale, Claudio; Hardy, Bruce; Chahine, Richard; Cossement, Daniel; Tamburello, David; Anton, Donald

    2014-10-13

    Hydrogen storage systems based on adsorbent materials have the potential of achieving the U.S. Department of Energy (DOE) targets, especially in terms of gravimetric capacity. This paper deals with analysis of adsorption storage systems adopting the flow through cooling concept. By this approach the feeding hydrogen provides the needed cold to maintain the tank at low temperatures. Two adsorption systems have been examined and modeled adopting the Dubinin-Astakhov model, to see their performance under selected operating conditions. A first case has been analyzed, modeling a storage tank filled with carbon based material (namely MaxSorb®) and comparing the numerical outcomes with the available experimental results for a 2.5 L tank. Under selected operating conditions (minimum inlet hydrogen temperature of approximately 100 K and maximum pressure on the order of 8.5 MPa) and adopting the flow through cooling concept the material shows a gravimetric capacity of about 5.7 %. A second case has been modeled, examining the same tank filled with metal organic framework material (MOF5®) under approximately the same conditions. The model shows that the latter material can achieve a (material) gravimetric capacity on the order of 11%, making the system potentially able to achieve the DOE 2017 target.

  17. Simulation of hydrogen adsorption systems adopting the flow through cooling concept

    DOE PAGES

    Corgnale, Claudio; Hardy, Bruce; Chahine, Richard; Cossement, Daniel; Tamburello, David; Anton, Donald

    2014-10-13

    Hydrogen storage systems based on adsorbent materials have the potential of achieving the U.S. Department of Energy (DOE) targets, especially in terms of gravimetric capacity. This paper deals with analysis of adsorption storage systems adopting the flow through cooling concept. By this approach the feeding hydrogen provides the needed cold to maintain the tank at low temperatures. Two adsorption systems have been examined and modeled adopting the Dubinin-Astakhov model, to see their performance under selected operating conditions. A first case has been analyzed, modeling a storage tank filled with carbon based material (namely MaxSorb®) and comparing the numerical outcomes withmore » the available experimental results for a 2.5 L tank. Under selected operating conditions (minimum inlet hydrogen temperature of approximately 100 K and maximum pressure on the order of 8.5 MPa) and adopting the flow through cooling concept the material shows a gravimetric capacity of about 5.7 %. A second case has been modeled, examining the same tank filled with metal organic framework material (MOF5®) under approximately the same conditions. The model shows that the latter material can achieve a (material) gravimetric capacity on the order of 11%, making the system potentially able to achieve the DOE 2017 target.« less

  18. Three-component competitive adsorption model for flow-through PAC systems. 2. Model application to a PAC/membrane system.

    PubMed

    Li, Qilin; Mariñas, Benito J; Snoeyink, Vernon L; Campos, Carlos

    2003-07-01

    A three-component competitive adsorption kinetic model, developed and validated in part 1 of this study, was applied to a continuous-flow PAC/membrane system to study the effects of various system and operating parameters on organic removal. The model quantitatively describes the two competitive adsorption mechanisms that occur during adsorption of trace organic compounds by powdered activated carbon (PAC) in flow-through systems where the PAC is retained in the system: pore blockage and direct competition for adsorption sites. Model simulations were conducted to investigate the effects of influent water composition, membrane cleaning water quality, PAC pore size distribution, and system operation conditions such as hydraulic retention time, membrane cleaning interval, and PAC dosing method on treatment efficiency. Effects of these factors on adsorption capacity as well as surface diffusion rate and consequent removal of the trace organic compound were discussed. It was found that optimal operating conditions for maximum trace organic compound removal must be determined on the basis of the adsorption properties and concentrations of the competing compounds in the influent. For the conditions investigated in this study, the small strongly competing compound, p-DCB, had greater impact on atrazine removal than the large pore-blocking compound, PSS-1.8k. Various process design and operating parameters had complex and interrelated effects on the impact of competitive adsorption and corresponding trace contaminant removal efficiency in hybrid PAC/membrane systems. PMID:12875407

  19. Construction of a high efficiency copper adsorption bacterial system via peptide display and its application on copper dye polluted wastewater.

    PubMed

    Maruthamuthu, Murali Kannan; Nadarajan, Saravanan Prabhu; Ganesh, Irisappan; Ravikumar, Sambandam; Yun, Hyungdon; Yoo, Ik-Keun; Hong, Soon Ho

    2015-11-01

    For the construction of an efficient copper waste treatment system, a cell surface display strategy was employed. The copper adsorption ability of recombinant bacterial strains displaying three different copper binding peptides were evaluated in LB Luria-Bertani medium (LB), artificial wastewater, and copper phthalocyanine containing textile dye industry wastewater samples. Structural characteristics of the three peptides were also analyzed by similarity-based structure modeling. The best binding peptide was chosen for the construction of a dimeric peptide display and the adsorption ability of the monomeric and dimeric peptide displayed strains were compared. The dimeric peptide displayed strain showed superior copper adsorption in all three tested conditions (LB, artificial wastewater, and textile dye industry wastewater). When the strains were exposed to copper phthalocyanine dye polluted wastewater, the dimeric peptide display [543.27 µmol/g DCW dry cell weight (DCW)] showed higher adsorption of copper when compared with the monomeric strains (243.53 µmol/g DCW).

  20. Analytical study of a gas-fired adsorptive air-conditioning system

    SciTech Connect

    Poyelle, F.; Guilleminot, J.J.; Meunier, F.

    1996-11-01

    Adsorptive air conditioning represents a potential alternative to chlorofluorocarbon (CFC) systems. But to compete with other systems, adsorption systems must exhibit sufficient figures of merit and energetic densities. An analytical study to predict the overall heat transfer coefficient in an adsorber has been conducted and is presented here. This study, based on a method-of-moment analysis, shows the influence of three parameters limiting the heat transfer in adsorbent beds. Heat transfer in adsorbent beds has been intensified. Using new consolidated materials, the machine utilizes two uniform temperature adsorbent beds in a cycle that incorporates both heat and mass recovery. It uses a zeolite-water pair. It is designed to produce 3 kW of cooling. Expected cooling performances are 300 W/kg of adsorbent with a coefficient of performance (COP) close to 0.8 and a cycle time of 20 minutes. The thermal conditions used to test the cycle are: the heater, 220 C; the cooler, 40 C; and the evaporation temperature, 3 C.

  1. Testing, Modeling and System Impact of Metabolic Heat Regenerated Temperature Swing Adsorption

    NASA Technical Reports Server (NTRS)

    Lacomini, Christine S.; Powers, Aaron; Lewis, Matthew; Linrud, Christopher; Waguespack, Glenn; Conger, Bruce; Paul, Heather L.

    2008-01-01

    Metabolic heat regenerated temperature swing adsorption (MTSA) technology is being developed for removal and rejection of carbon dioxide (CO2) and heat from a portable life support system (PLSS) to the Martian environment. Previously, hardware was built and tested to demonstrate using heat from simulated, dry ventilation loop gas to affect the temperature swing required to regenerate an adsorbent used for CO2 removal. New testing has been performed using a moist, simulated ventilation loop gas to demonstrate the effects of water condensing and freezing in the heat exchanger during adsorbent regeneration. In addition, thermal models of the adsorbent during regeneration were modified and calibrated with test data to capture the effect of the CO2 heat of desorption. Finally, MTSA impact on PLSS design was evaluated by performing thermal balances assuming a specific PLSS architecture. Results using NASA s Extravehicular Activity System Sizing Analysis Tool (EVAS_SAT), a PLSS system evaluation tool, are presented.

  2. Performance study of unglazed cylindrical solar collector for adsorption refrigeration system

    NASA Astrophysics Data System (ADS)

    Mahesh, A.; Kaushik, S. C.; Kumaraguru, A. K.

    2013-12-01

    In the present communication, the unglazed cylindrical solar adsorber module is suggested for refrigeration and theoretical models for the heat and mass transfer in the cylindrical adsorber with heat balance equations in the collector components have been developed. It has been found that, both the SCP and COPsolar raises with increasing the evaporation temperature and drop off with the increase of the condensation temperature. The COPsolar increased from 0.15 to 0.52 with the increase of the total solar energy absorbed by the collector while the COPcycle varied in the range of 0.57-0.73. The efficiency of unglazed solar collector varied from 36 to 44 %. The cost of current unglazed adsorption refrigeration system is compared with the glazed system, and it is 33 to 50 % less than the cost of glazed system.

  3. Construction and measurements of an improved vacuum-swing-adsorption radon-mitigation system

    NASA Astrophysics Data System (ADS)

    Street, J.; Bunker, R.; Dunagan, C.; Loose, X.; Schnee, R. W.; Stark, M.; Sundarnath, K.; Tronstad, D.

    2015-08-01

    In order to reduce backgrounds from radon-daughter plate-out onto detector surfaces, an ultra-low-radon cleanroom is being commissioned at the South Dakota School of Mines and Technology. An improved vacuum-swing-adsorption radon mitigation system and cleanroom build upon a previous design implemented at Syracuse University that achieved radon levels of ˜0.2 Bq m-3. This improved system will employ a better pump and larger carbon beds feeding a redesigned cleanroom with an internal HVAC unit and aged water for humidification. With the rebuilt (original) radon mitigation system, the new low-radon cleanroom has already achieved a > 300× reduction from an input activity of 58.6 ± 0.7 Bq m-3 to a cleanroom activity of 0.13 ± 0.06 Bq m-3.

  4. Construction and measurements of an improved vacuum-swing-adsorption radon-mitigation system

    SciTech Connect

    Street, J. Bunker, R.; Dunagan, C.; Loose, X.; Schnee, R. W.; Stark, M.; Sundarnath, K.; Tronstad, D.

    2015-08-17

    In order to reduce backgrounds from radon-daughter plate-out onto detector surfaces, an ultra-low-radon cleanroom is being commissioned at the South Dakota School of Mines and Technology. An improved vacuum-swing-adsorption radon mitigation system and cleanroom build upon a previous design implemented at Syracuse University that achieved radon levels of ∼0.2 Bq m{sup −3}. This improved system will employ a better pump and larger carbon beds feeding a redesigned cleanroom with an internal HVAC unit and aged water for humidification. With the rebuilt (original) radon mitigation system, the new low-radon cleanroom has already achieved a > 300× reduction from an input activity of 58.6 ± 0.7 Bq m{sup −3} to a cleanroom activity of 0.13 ± 0.06 Bq m{sup −3}.

  5. The molecular adsorption-type endotoxin detection system using immobilized ɛ-polylysine

    NASA Astrophysics Data System (ADS)

    Ooe, Katsutoshi; Tsuji, Akihito; Nishishita, Naoki; Hirano, Yoshiaki

    2007-12-01

    mass incrementation is occurred, and the existence of endtoxin can be detected immediately, by using of Quartz Crystal Microbalance (QCM). In this report, the immobilization of ɛ-polylysine onto the Au and Si substrate and its adsorptive activity are described. We use X-ray Photoelectron Spectroscopy (XPS) to confirm the ɛ-polylysine immobilization, and the adsorptive activity of immobilized ɛ-polylysine is measured by AFM and QCM. This molecular adsorption type endotoxin sensor aims to the realization of "real-time endotoxin detection system".

  6. 75 FR 60495 - Eighteenth Plenary Meeting: RTCA Special Committee 203: Unmanned Aircraft Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-30

    ... Federal Aviation Administration Eighteenth Plenary Meeting: RTCA Special Committee 203: Unmanned Aircraft Systems AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of RTCA Special Committee 203... RTCA Special Committee 203: Unmanned Aircraft Systems. DATES: The meeting will be held October...

  7. 75 FR 2925 - Sixteenth Plenary Meeting: RTCA Special Committee 203: Unmanned Aircraft Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-19

    ... Federal Aviation Administration Sixteenth Plenary Meeting: RTCA Special Committee 203: Unmanned Aircraft Systems AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of RTCA Special Committee 203... RTCA Special Committee 203: Unmanned Aircraft Systems. DATES: The meeting will be held February...

  8. Three-component competitive adsorption model for flow-through PAC systems. 1. Model development and verification with a PAC/membrane system.

    PubMed

    Li, Qilin; Mariñas, Benito J; Snoeyink, Vernon L; Campos, Carlos

    2003-07-01

    Natural organic matter (NOM) interferes with the adsorption of trace organic compounds on porous adsorbents such as powdered activated carbon (PAC) by pore blockage and direct competition for adsorption sites. The competitive effect of NOM in flow-through systems in which the retention time of the PAC is greater than the hydraulic retention time of the system can be magnified because NOM from the influent water can continue to adsorb on the PAC retained in the system. As a result, the adsorption capacity and the diffusion coefficient of trace compounds can decrease as NOM from the influent water accumulates. In this study, a dynamic three-component adsorption model was developed to quantitatively describe the removal of a trace compound from water in flow-through PAC processes. The system was simplified by using p-dichlorobenzene (p-DCB) to represent the NOM fraction that competes directly with the target trace organic atrazine for adsorption sites and by using poly(styrene sulfonate) (PSS-1.8k) to represent large, pore-blocking NOM. The model was based on the homogeneous surface diffusion assumption with the adsorption capacity of atrazine being gradually adjusted using a simplified version of the ideal adsorbed solution theory model developed in this study. The surface diffusion coefficients of atrazine and p-DCB were modeled as a function of the surface concentration of the pore-blocking compound, PSS-1.8k. The model was verified experimentally with a PAC/microfiltration (MF) system. The use of single-solute adsorption parameters obtained from batch isotherm and kinetic tests resulted in good model predictions for the adsorption of atrazine and the two model compounds under operating conditions typical of PAC/MF systems. The model will be applied to study various operating conditions and other system parameters of PAC/membrane systems in part 2 of this study. PMID:12875406

  9. 40 CFR 141.551 - What strengthened combined filter effluent turbidity limits must my system meet?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... effluent turbidity limits must my system meet? 141.551 Section 141.551 Protection of Environment... Effluent Requirements § 141.551 What strengthened combined filter effluent turbidity limits must my system meet? Your system must meet two strengthened combined filter effluent turbidity limits. (a) The...

  10. 40 CFR 141.551 - What strengthened combined filter effluent turbidity limits must my system meet?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... effluent turbidity limits must my system meet? 141.551 Section 141.551 Protection of Environment... Effluent Requirements § 141.551 What strengthened combined filter effluent turbidity limits must my system meet? Your system must meet two strengthened combined filter effluent turbidity limits. (a) The...

  11. 40 CFR 141.551 - What strengthened combined filter effluent turbidity limits must my system meet?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... effluent turbidity limits must my system meet? 141.551 Section 141.551 Protection of Environment... Effluent Requirements § 141.551 What strengthened combined filter effluent turbidity limits must my system meet? Your system must meet two strengthened combined filter effluent turbidity limits. (a) The...

  12. 40 CFR 141.551 - What strengthened combined filter effluent turbidity limits must my system meet?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... effluent turbidity limits must my system meet? 141.551 Section 141.551 Protection of Environment... Effluent Requirements § 141.551 What strengthened combined filter effluent turbidity limits must my system meet? Your system must meet two strengthened combined filter effluent turbidity limits. (a) The...

  13. Ling's Adsorption Theory as a Mechanism of Membrane Potential Generation Observed in Both Living and Nonliving Systems.

    PubMed

    Tamagawa, Hirohisa; Funatani, Makoto; Ikeda, Kota

    2016-01-26

    The potential between two electrolytic solutions separated by a membrane impermeable to ions was measured and the generation mechanism of potential measured was investigated. From the physiological point of view, a nonzero membrane potential or action potential cannot be observed across the impermeable membrane. However, a nonzero membrane potential including action potential-like potential was clearly observed. Those observations gave rise to a doubt concerning the validity of currently accepted generation mechanism of membrane potential and action potential of cell. As an alternative theory, we found that the long-forgotten Ling's adsorption theory was the most plausible theory. Ling's adsorption theory suggests that the membrane potential and action potential of a living cell is due to the adsorption of mobile ions onto the adsorption site of cell, and this theory is applicable even to nonliving (or non-biological) system as well as living system. Through this paper, the authors emphasize that it is necessary to reconsider the validity of current membrane theory and also would like to urge the readers to pay keen attention to the Ling's adsorption theory which has for long years been forgotten in the history of physiology.

  14. Ling’s Adsorption Theory as a Mechanism of Membrane Potential Generation Observed in Both Living and Nonliving Systems

    PubMed Central

    Tamagawa, Hirohisa; Funatani, Makoto; Ikeda, Kota

    2016-01-01

    The potential between two electrolytic solutions separated by a membrane impermeable to ions was measured and the generation mechanism of potential measured was investigated. From the physiological point of view, a nonzero membrane potential or action potential cannot be observed across the impermeable membrane. However, a nonzero membrane potential including action potential-like potential was clearly observed. Those observations gave rise to a doubt concerning the validity of currently accepted generation mechanism of membrane potential and action potential of cell. As an alternative theory, we found that the long-forgotten Ling’s adsorption theory was the most plausible theory. Ling’s adsorption theory suggests that the membrane potential and action potential of a living cell is due to the adsorption of mobile ions onto the adsorption site of cell, and this theory is applicable even to nonliving (or non-biological) system as well as living system. Through this paper, the authors emphasize that it is necessary to reconsider the validity of current membrane theory and also would like to urge the readers to pay keen attention to the Ling’s adsorption theory which has for long years been forgotten in the history of physiology. PMID:26821050

  15. Comparison of adsorption and photo-Fenton processes for phenol and paracetamol removing from aqueous solutions: single and binary systems.

    PubMed

    Rad, Leila Roshanfekr; Haririan, Ismaeil; Divsar, Faten

    2015-02-01

    In the present study, adsorption and photo-Fenton processes have been compared for the removal of phenol and paracetamol from aqueous solutions in a single and binary systems. NaX nanozeolites and cobalt ferrite nanoparticles were used during adsorption and photo-Fenton processes, respectively. Both nanoparticles were synthesized using microwave heating method. The synthesized nanoparticles were characterized using powder X-ray diffraction (XRD) and scanning electronic microscopy (SEM) analysis. Based on results, more than 99% removing percentages of phenol and paracetamol were obtained during photo-Fenton process at initial concentrations of 10, 20, 50, 100 and 200 mg/L of phenol and paracetamol. Moreover, the complete removing of phenol and paracetamol was only achieved at lower initial concentrations than 10 mg/L for phenol and paracetamol during adsorption process. The results showed a significant dependence of the phenol and paracetamol removing on the initial concentrations of phenol and paracetamol for selection of process. The photo-Fenton process could be considered an alternative method in higher initial concentrations of phenol and paracetamol. However, the adsorption process due to economical issue was preferred for phenol and paracetamol removing at lower initial concentrations. The kinetic data of photo-Fenton and adsorption processes were well described using first-order and pseudo-second-order kinetic models. The results of phenol and paracetamol removing in a binary system confirmed the obtained results of single removing of phenol and paracetamol in selection of process.

  16. Ling's Adsorption Theory as a Mechanism of Membrane Potential Generation Observed in Both Living and Nonliving Systems.

    PubMed

    Tamagawa, Hirohisa; Funatani, Makoto; Ikeda, Kota

    2016-01-01

    The potential between two electrolytic solutions separated by a membrane impermeable to ions was measured and the generation mechanism of potential measured was investigated. From the physiological point of view, a nonzero membrane potential or action potential cannot be observed across the impermeable membrane. However, a nonzero membrane potential including action potential-like potential was clearly observed. Those observations gave rise to a doubt concerning the validity of currently accepted generation mechanism of membrane potential and action potential of cell. As an alternative theory, we found that the long-forgotten Ling's adsorption theory was the most plausible theory. Ling's adsorption theory suggests that the membrane potential and action potential of a living cell is due to the adsorption of mobile ions onto the adsorption site of cell, and this theory is applicable even to nonliving (or non-biological) system as well as living system. Through this paper, the authors emphasize that it is necessary to reconsider the validity of current membrane theory and also would like to urge the readers to pay keen attention to the Ling's adsorption theory which has for long years been forgotten in the history of physiology. PMID:26821050

  17. 40 CFR 63.7927 - What are my inspection and monitoring requirements for closed vent systems and control devices?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... required by § 63.693(c)(2)(ii). (b) If you use a regenerable carbon adsorption system, you must meet the... adsorption cycle. (2) Use a CPMS to measure and record the hourly average temperature of the adsorption bed... average temperature of the adsorption bed after regeneration (and within 15 minutes after completing...

  18. 40 CFR 63.7927 - What are my inspection and monitoring requirements for closed vent systems and control devices?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... required by § 63.693(c)(2)(ii). (b) If you use a regenerable carbon adsorption system, you must meet the... adsorption cycle. (2) Use a CPMS to measure and record the hourly average temperature of the adsorption bed... average temperature of the adsorption bed after regeneration (and within 15 minutes after completing...

  19. 40 CFR 63.7927 - What are my inspection and monitoring requirements for closed vent systems and control devices?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... required by § 63.693(c)(2)(ii). (b) If you use a regenerable carbon adsorption system, you must meet the... adsorption cycle. (2) Use a CPMS to measure and record the hourly average temperature of the adsorption bed... average temperature of the adsorption bed after regeneration (and within 15 minutes after completing...

  20. Studies of adsorption equilibria and kinetics in the systems: Aqueous solution of dyes-mesoporous carbons

    NASA Astrophysics Data System (ADS)

    Derylo-Marczewska, A.; Marczewski, A. W.; Winter, Sz.; Sternik, D.

    2010-06-01

    Two carbonaceous materials were synthesized by using the method of impregnation of mesoporous silicas obtained by applying the Pluronic copolymers as pore-creating agents. The isotherms of adsorption of methylene blue and methyl orange from aqueous solutions were measured by the static method. The profiles of adsorbate concentration change in time were obtained from the UV-vis spectra. The adsorption isotherms and kinetic dependence were discussed in the terms of theory of adsorption on heterogeneous surfaces.

  1. Development and analysis of micro-polygeneration systems and adsorption chillers

    NASA Astrophysics Data System (ADS)

    Gluesenkamp, Kyle

    About a fifth of all primary energy in the US is consumed by residential buildings, mostly for cooling, heating and to provide electricity. Furthermore, retrofits are essential to reducing this consumption, since the buildings that exist today will comprise over half of those in use in 2050. Residential combined heat and power (or micro CHP, defined by <5 kW electrical generation capacity) has been identified as a retrofit technology which can reduce energy consumption in existing homes during the heating season by 5-30%. This thesis investigates the addition of a thermally-driven chiller/heat pump to a CHP system (to form a trigeneration system) to additionally provide savings during the cooling season, and enhance heating season savings. Scenarios are identified in which adding thermally-driven equipment to a micro CHP system reduces primary energy consumption, through analytical and experimental investigations. The experimental focus is on adsorption heat pump systems, which are capable of being used with the CHP engines (prime movers) that are already widely deployed. The analytical analysis identifies energy saving potential off-grid for today's prime movers, with potential on-grid for various fuel cell technologies. A novel dynamic test facility was developed to measure real-world residential trigeneration system performance using a prototype adsorption chiller. The chiller was designed and constructed for this thesis and was driven by waste heat from a commercially available natural gas-fueled 4 kW (electric) CHP engine. A control strategy for the chiller was developed, enabling a 5-day experiment to be run using a thermal load profile based on moderate Maryland summer air conditioning loads and typical single-family domestic hot water demand, with experimental results in agreement with models. In this summer mode, depending on electrical loads, the trigeneration system used up to 36% less fuel than off-grid separate generation and up to 29% less fuel than

  2. Gas Adsorption Properties of Fluorocarbon Thin Films Prepared Using Three Different Types of RF Magnetron Sputtering Systems

    NASA Astrophysics Data System (ADS)

    Satoru Iwamori,; Norihiko Hasegawa,; Satoshi Yano,; Kazutoshi Noda,

    2010-04-01

    Fluorocarbon thin films were deposited onto a quartz crystal with a poly(tetrafluoroethylene) target using three different types of RF magnetron sputtering systems with strong, weak, and unbalanced magnetic fields. The adsorption properties of these thin films for water, ethanol, acetone, acetaldehyde, toluene, and methyl salicylate were evaluated using the quartz crystal microbalance (QCM) method in order to characterize the surface properties of these thin films. These thin films have low sensitivities to non-polar solvents that contain methyl and aromatic groups, and high sensitivities to polar solvents that contain carbonyl and hydroxyl groups. Chemical structures, especially, polar moieties in these fluorocarbon thin films would affect the gas adsorption properties.

  3. 77 FR 52742 - Public Meeting-Strengthening the National Medical Device Postmarket Surveillance System; Request...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-30

    ...The Food and Drug Administration (FDA) is announcing the following public meeting entitled ``Public Meeting--Strengthening the National Medical Device Postmarket Surveillance System.'' The purpose of the meeting is to solicit public feedback regarding the medical device postmarket surveillance system in the United...

  4. 76 FR 50810 - Seventh Meeting: RTCA Special Committee 219: Attitude and Heading Reference System

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-16

    ... Committee 219 meeting: Attitude and Heading Reference System. SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 219: Attitude and Heading Reference System... Federal Aviation Administration Seventh Meeting: RTCA Special Committee 219: Attitude and...

  5. 77 FR 15335 - Notice of Public Meetings: Arsenic Small Systems Compliance and Alternative Affordability...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-15

    ... AGENCY 40 CFR Parts 141 and 142 Notice of Public Meetings: Arsenic Small Systems Compliance and... of Public Meetings. SUMMARY: EPA is holding three meetings of the Arsenic Small Systems Working Group to discuss barriers to the use of arsenic treatment technologies and alternative...

  6. 76 FR 24957 - Nineteenth Meeting: RTCA Special Committee 203: Unmanned Aircraft Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-03

    ... Federal Aviation Administration Nineteenth Meeting: RTCA Special Committee 203: Unmanned Aircraft Systems AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of RTCA Special Committee 203 meeting... RTCA Special Committee 203: Unmanned Aircraft Systems. DATES: The meeting will be held May 17-19,...

  7. 76 FR 33022 - Eighty-Sixth Meeting: RTCA Special Committee 159: Global Positioning System (GPS)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-07

    ... Federal Aviation Administration Eighty-Sixth Meeting: RTCA Special Committee 159: Global Positioning... 159 meeting: Global Positioning System (GPS). SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 159: Global Positioning System (GPS). DATES: The...

  8. 75 FR 28318 - Eighty-Second Meeting: RTCA Special Committee 159: Global Positioning System (GPS)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-20

    ... Federal Aviation Administration Eighty-Second Meeting: RTCA Special Committee 159: Global Positioning... 159 meeting: Global Positioning System (GPS). SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 159: Global Positioning System (GPS). DATES: The...

  9. 75 FR 2581 - Eighty-First Meeting: RTCA Special Committee 159: Global Positioning System (GPS)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-15

    ... Federal Aviation Administration Eighty-First Meeting: RTCA Special Committee 159: Global Positioning... 159 meeting: Global Positioning System (GPS). SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 159: Global Positioning System (GPS). DATES: The...

  10. 76 FR 27744 - Eighty-Fifth Meeting: RTCA Special Committee 159: Global Positioning System (GPS)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-12

    ... Federal Aviation Administration Eighty-Fifth Meeting: RTCA Special Committee 159: Global Positioning... 159 meeting: Global Positioning System (GPS). SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 159: Global Positioning System (GPS). DATES: The...

  11. 78 FR 69437 - Landmarks Committee of the National Park System Advisory Board Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-19

    ... National Park Service Landmarks Committee of the National Park System Advisory Board Meeting AGENCY: National Park Service, Interior. ACTION: Notice of meeting. SUMMARY: Notice is hereby given in accordance... Federal Regulations, that a meeting of the Landmarks Committee of the National Park System Advisory...

  12. 76 FR 6157 - Meeting of the National Park System Advisory Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-03

    ... National Park Service Meeting of the National Park System Advisory Board AGENCY: Department of the Interior, National Park Service. ACTION: Notice of meeting. SUMMARY: Notice is hereby given in accordance with the... Regulations, that the National Park System Advisory Board will meet April 12-13, 2011, in San...

  13. 77 FR 64838 - Sixteenth Meeting: RTCA Special Committee 224, Airport Security Access Control Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-23

    ... Federal Aviation Administration Sixteenth Meeting: RTCA Special Committee 224, Airport Security Access...). ACTION: Meeting Notice of RTCA Special Committee 224, Airport Security Access Control Systems. SUMMARY... Committee 224, Airport Security Access Control Systems. DATES: The meeting will be held November 15,...

  14. 78 FR 16757 - Twentieth Meeting: RTCA Special Committee 224, Airport Security Access Control Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-18

    ... Federal Aviation Administration Twentieth Meeting: RTCA Special Committee 224, Airport Security Access...). ACTION: Meeting Notice of RTCA Special Committee 224, Airport Security Access Control Systems. SUMMARY... Committee 224, Airport Security Access Control Systems. DATES: The meeting will be held April 4, 2013 from...

  15. 77 FR 55894 - Fifteenth Meeting: RTCA Special Committee 224, Airport Security Access Control Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-11

    ... Federal Aviation Administration Fifteenth Meeting: RTCA Special Committee 224, Airport Security Access...). ACTION: Meeting Notice of RTCA Special Committee 224, Airport Security Access Control Systems. SUMMARY... Committee 224, Airport Security Access Control Systems DATES: The meeting will be held September 27-28,...

  16. 77 FR 15448 - Twelfth Meeting: RTCA Special Committee 224, Airport Security Access Control Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-15

    ... Federal Aviation Administration Twelfth Meeting: RTCA Special Committee 224, Airport Security Access...). ACTION: Notice of meeting RTCA Special Committee 224, Airport Security Access Control Systems. SUMMARY... 224, Airport Security Access Control Systems DATES: The meeting will be held April 5, 2012, from 10...

  17. 78 FR 22025 - Twenty First Meeting: RTCA Special Committee 224, Airport Security Access Control Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-12

    ... Federal Aviation Administration Twenty First Meeting: RTCA Special Committee 224, Airport Security Access...). ACTION: Meeting Notice of RTCA Special Committee 224, Airport Security Access Control Systems. SUMMARY... Committee 224, Airport Security Access Control Systems. DATES: The meeting will be held April 9-10,...

  18. 78 FR 43963 - Twenty-Third Meeting: RTCA Special Committee 224, Airport Security Access Control Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-22

    ... Federal Aviation Administration Twenty-Third Meeting: RTCA Special Committee 224, Airport Security Access...). ACTION: Meeting Notice of RTCA Special Committee 224, Airport Security Access Control Systems. SUMMARY... Committee 224, Airport Security Access Control Systems. DATES: The meeting will be held on June 20,...

  19. 77 FR 25525 - Thirteenth Meeting: RTCA Special Committee 224, Airport Security Access Control Systems.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-30

    ... TRANSPORTATION Federal Aviation Administration Thirteenth Meeting: RTCA Special Committee 224, Airport Security... (DOT). ACTION: Meeting Notice of RTCA Special Committee 224, Airport Security Access Control Systems... Committee 224, Airport Security Access Control Systems DATES: The meeting will be held May 30, 2012, from...

  20. 77 FR 71474 - Seventeenth Meeting: RTCA Special Committee 224, Airport Security Access Control Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-30

    ... Federal Aviation Administration Seventeenth Meeting: RTCA Special Committee 224, Airport Security Access...). ACTION: Meeting Notice of RTCA Special Committee 224, Airport Security Access Control Systems. SUMMARY... Committee 224, Airport Security Access Control Systems. DATES: The meeting will be held December 13,...

  1. Proceedings of the Advanced Turbine Systems annual program review meeting

    SciTech Connect

    1994-12-31

    Goals of the 8-year program are to develop cleaner, more efficient, and less expensive gas turbine systems for utility and industrial electric power generation, cogeneration, and mechanical drive units. During this Nov. 9-11, 1994, meeting, presentations on energy policy issues were delivered by representatives of regulatory, industry, and research institutions; program overviews and technical reviews were given by contractors; and ongoing and proposed future projects sponsored by university and industry were presented and displayed at the poster session. Panel discussions on distributed power and Advanced Gas Systems Research education provided a forum for interactive dialog and exchange of ideas. Exhibitors included US DOE, Solar Turbines, Westinghouse, Allison Engine Co., and GE.

  2. 78 FR 7816 - NASA Advisory Council; Aeronautics Committee; Unmanned Aircraft Systems Subcommittee Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-04

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Unmanned Aircraft Systems Subcommittee Meeting AGENCY: National Aeronautics and Space Administration. ACTION: Notice of meeting....

  3. 76 FR 75565 - NASA Advisory Council; Aeronautics Committee; Unmanned Aircraft Systems (UAS) Subcommittee Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-02

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Unmanned Aircraft Systems (UAS) Subcommittee Meeting AGENCY: National Aeronautics and Space Administration. ACTION: Notice of Meeting....

  4. 78 FR 25100 - NASA Advisory Council; Aeronautics Committee; Unmanned Aircraft Systems Subcommittee; Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-29

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Unmanned Aircraft Systems Subcommittee; Meeting AGENCY: National Aeronautics and Space Administration. ACTION: Notice of meeting....

  5. 78 FR 38076 - NASA Advisory Council; Aeronautics Committee; Unmanned Aircraft Systems Subcommittee; Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-25

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Unmanned Aircraft Systems Subcommittee; Meeting AGENCY: National Aeronautics and Space Administration. ACTION: Notice of Meeting....

  6. 77 FR 59020 - NASA Advisory Council; Aeronautics Committee; Unmanned Aircraft Systems Subcommittee; Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-25

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Unmanned Aircraft Systems Subcommittee; Meeting AGENCY: National Aeronautics and Space Administration. ACTION: Notice of meeting....

  7. Phosphorous adsorption and precipitation in a permeable reactive wall: Applications for wastewater disposal systems

    SciTech Connect

    Baker, M.J.; Blowes, D.W. |; Placek, C.J. |

    1997-12-31

    A permeable reactive mixture has been developed using low cost, readily available materials that is capable of providing effective, long-term phosphorous treatment in areas impacted by on-land wastewater disposal. The reactive mixture creates a geochemical environment suitable for P-attenuation by both adsorption and precipitation reactions. Potential benefits include significant reductions in phosphorous loading to receiving groundwater and surface water systems, and the accumulation of P-mass in a finite and accessible volume of material. The mixture may be applied as a component within surface treatment systems or in subsurface applications such as horizontal or vertical permeable reactive walls. The mixture averaged > 90% treatment efficiency over 3.6 years of continuous-flow laboratory column experiments. The mixture was further evaluated at the pilot-scale to treat municipal wastewater, and the field-scale to treat a well-characterized septic system plume using an in situ funnel and gate system. Average PO{sub 4}-P concentrations in effluent exiting the reactive mixture range between 0 - 0.3 mg/L. Mineralogical analyses have isolated the phases responsible for phosphorous uptake, and discrete phosphate precipitates have been identified.

  8. 2002 Computing and Interdisciplinary Systems Office Review and Planning Meeting

    NASA Technical Reports Server (NTRS)

    Lytle, John; Follen, Gregory; Lopez, Isaac; Veres, Joseph; Lavelle, Thomas; Sehra, Arun; Freeh, Josh; Hah, Chunill

    2003-01-01

    The technologies necessary to enable detailed numerical simulations of complete propulsion systems are being developed at the NASA Glenn Research Center in cooperation with NASA Glenn s Propulsion program, NASA Ames, industry, academia and other government agencies. Large scale, detailed simulations will be of great value to the nation because they eliminate some of the costly testing required to develop and certify advanced propulsion systems. In addition, time and cost savings will be achieved by enabling design details to be evaluated early in the development process before a commitment is made to a specific design. This year s review meeting describes the current status of the NPSS and the Object Oriented Development Kit with specific emphasis on the progress made over the past year on air breathing propulsion applications for aeronautics and space transportation applications. Major accomplishments include the first 3-D simulation of the primary flow path of a large turbofan engine in less than 15 hours, and the formal release of the NPSS Version 1.5 that includes elements of rocket engine systems and a visual based syntax layer. NPSS and the Development Kit are managed by the Computing and Interdisciplinary Systems Office (CISO) at the NASA Glenn Research Center and financially supported in fiscal year 2002 by the Computing, Networking and Information Systems (CNIS) project managed at NASA Ames, the Glenn Aerospace Propulsion and Power Program and the Advanced Space Transportation Program.

  9. Meeting Residential Ventilation Standards Through Dynamic Control of Ventilation Systems

    SciTech Connect

    Sherman, Max H.; Walker, Iain S.

    2011-04-01

    Existing ventilation standards, including American Society of Heating, Refrigerating, and Air-conditioning Engineers (ASHRAE) Standard 62.2, specify continuous operation of a defined mechanical ventilation system to provide minimum ventilation, with time-based intermittent operation as an option. This requirement ignores several factors and concerns including: other equipment such as household exhaust fans that might incidentally provide ventilation, negative impacts of ventilation when outdoor pollutant levels are high, the importance of minimizing energy use particularly during times of peak electricity demand, and how the energy used to condition air as part of ventilation system operation changes with outdoor conditions. Dynamic control of ventilation systems can provide ventilation equivalent to or better than what is required by standards while minimizing energy costs and can also add value by shifting load during peak times and reducing intake of outdoor air contaminants. This article describes the logic that enables dynamic control of whole-house ventilation systems to meet the intent of ventilation standards and demonstrates the dynamic ventilation system control concept through simulations and field tests of the Residential Integrated Ventilation-Energy Controller (RIVEC).

  10. Local chemical potentials and pressures in heterogeneous systems: Adsorptive, absorptive, interfaces

    NASA Astrophysics Data System (ADS)

    Tovbin, Yu. K.

    2016-07-01

    Equations self-consistently describing chemical and mechanical equilibria in heterogeneous systems are derived. The equations are based on the lattice gas model using discrete distributions of molecules in space (on a scale comparable to molecular size) and continuum distributions of molecules (at short distances inside the cells) during their translational and vibrational motions. It is shown that the theory provides a unified description of the equilibrium distributions of molecules in three aggregate states and at their interfaces. Potential functions of intermolecular interactions (such as Mie pair potentials) in several coordination spheres that determine the compressibility of the lattice structure are considered. For simplicity, it is assumed that differences between the sizes of mixture components are small. Expressions for the local components of the pressure tensor inside multicomponent solid phases and heterogeneous systems (adsorptive, absorptive, and interfaces) are obtained. It is established that they can be used to calculate the lattice parameters of deforming phases and the thermodynamic characteristics of interfaces, including surface tension. The tensor nature of the chemical potential in heterogeneous systems is discussed.

  11. Global Grazing Systems: Their Continuing Importance in Meeting Global Demand

    NASA Astrophysics Data System (ADS)

    Davis, K. F.; D'Odorico, P.

    2014-12-01

    Animal production exerts significant demand on land, water and food resources and is an extensive means by which humans modify natural systems. Demand for animal source foods has more than tripled over the past 50 years due to population growth and dietary change. To meet this demand, livestock intensification (e.g. concentrated animal feeding operations) has increased and with it the water, nitrogen and carbon footprints of animal production. However, grass-fed systems continue to contribute significantly to overall animal production. To date, little is known about the contributions of grass- and grain-fed systems to animal calorie production, how this has changed through time and to what extent these two systems are sensitive to climate. Using a calorie-based approach we hypothesize that grain-fed systems are increasing in importance (with serious implications for water and nutrient demand) and that rangeland productivity is correlated with rainfall. Our findings show that grass-fed systems made up the majority of animal calorie production since 1960 years but that the relative contribution of grain-fed system has increased (from 27% to 49%). This rapid transition towards grain-fed animal production is largely a result of changing diets demand, as we found the growth of grass-fed production only kept pace with population growth. On a regional scale, we find that Asia has been the major contributor to the increase in grass-fed animal calorie production and that Africa has undergone the most drastic transition from grass-fed to grain-fed dependence. Finally, as expected we see a positive relationship between rangeland productivity and precipitation and a shift from dairy- to meat-dominated production going from drier to wetter climates. This study represents a new means of analyzing the food security of animal products and an important step in understanding the historic trends of animal production, their relation to climate, their prospects for the future and their

  12. A van der Waals density functional theory comparison of metal decorated graphene systems for hydrogen adsorption

    NASA Astrophysics Data System (ADS)

    Wong, Janet; Yadav, Shwetank; Tam, Jasmine; Veer Singh, Chandra

    2014-06-01

    Previous Density Functional Theory (DFT) studies on metal decorated graphene generally use local density approximation (LDA) or generalized gradient approximation (GGA) functionals which can cause inaccuracies in hydrogen binding energies as they neglect van der Waals (vdW) interactions and are difficult to compare due to their widely varying simulation parameters. We investigated the hydrogen binding ability of several metals with a consistent set of simulations using the GGA functional and incorporated vdW forces through the vdW-DF2 functional. Metal adatom anchoring on graphene and hydrogen adsorption ability for both single and double sided decoration were studied for eight metals (Al, Li, Na, Ca, Cu, Ni, Pd, and Pt). It was found that the vdW correction can have a significant impact on both metal and hydrogen binding energies. The vdW-DF2 functional led to stronger metal adatom and hydrogen binding for light metals in comparison to GGA results, while heavier transition metals displayed the opposite behaviour but still produced stronger hydrogen binding energies than light metals. Nickel was found to be the best balance between hydrogen binding ability for reversible storage and low weight. The effects on hydrogen binding energy and maximum achievable hydrogen gravimetric density were analyzed for Ni-graphene systems with varying metal coverage. Lower metal coverage was found to improve hydrogen binding but decrease hydrogen gravimetric density. The highest achieved Ni-graphene system gravimetric density was 6.12 wt. %.

  13. 75 FR 55847 - Fourteenth Meeting: EUROCAE WG-72: RTCA Special Committee 216: Aeronautical Systems Security...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-14

    ... Federal Aviation Administration Fourteenth Meeting: EUROCAE WG-72: RTCA Special Committee 216...: Notice of EUROCAE WG-72: RTCA Special Committee 216: Aeronautical Systems Security (Joint Meeting). SUMMARY: The FAA is issuing this notice to advise the public of a meeting of EUROCAE WG-72: RTCA...

  14. 76 FR 50811 - Seventeenth Meeting: EUROCAE WG-72: RTCA Special Committee 216: Aeronautical Systems Security...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-16

    ... Federal Aviation Administration Seventeenth Meeting: EUROCAE WG-72: RTCA Special Committee 216...: Notice of EUROCAE WG-72: RTCA Special Committee 216: Aeronautical Systems Security (Joint Meeting). SUMMARY: The FAA is issuing this notice to advise the public of a meeting of EUROCAE WG-72: RTCA...

  15. 76 FR 22162 - Sixteenth Meeting: EUROCAE WG-72: RTCA Special Committee 216: Aeronautical Systems Security...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-20

    ... Systems Security (Joint Meeting) AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of....m. to 5 p.m. ADDRESSES: The meeting will be held at Airbus, Technical University, Airbus Technology....com and samira.bezza@eurocae.net of your intention to attend the meeting. FOR FURTHER...

  16. 78 FR 20168 - Twenty Fourth Meeting: RTCA Special Committee 203, Unmanned Aircraft Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-03

    ... Federal Aviation Administration Twenty Fourth Meeting: RTCA Special Committee 203, Unmanned Aircraft...: Meeting Notice of RTCA Special Committee 203, Unmanned Aircraft Systems. SUMMARY: The FAA is issuing this notice to advise the public of the twenty third meeting of RTCA Special Committee 203, Unmanned...

  17. 77 FR 25781 - Twenty-First Meeting: RTCA Special Committee 203, Unmanned Aircraft Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-01

    ... Federal Aviation Administration Twenty-First Meeting: RTCA Special Committee 203, Unmanned Aircraft...: Meeting Notice of RTCA Special Committee 203, Unmanned Aircraft Systems. SUMMARY: The FAA is issuing this notice to advise the public of the twenty-first meeting of RTCA Special Committee 203, Unmanned...

  18. 77 FR 50207 - Twenty-Second Meeting: RTCA Special Committee 203, Unmanned Aircraft Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-20

    ... Federal Aviation Administration Twenty-Second Meeting: RTCA Special Committee 203, Unmanned Aircraft...: Meeting notice of RTCA Special Committee 203, Unmanned Aircraft Systems. SUMMARY: The FAA is issuing this notice to advise the public of the twenty-second meeting of RTCA Special Committee 203, Unmanned...

  19. 78 FR 6400 - Twenty Third Meeting: RTCA Special Committee 203, Unmanned Aircraft Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-30

    ... Federal Aviation Administration Twenty Third Meeting: RTCA Special Committee 203, Unmanned Aircraft...: Meeting Notice of RTCA Special Committee 203, Unmanned Aircraft Systems. SUMMARY: The FAA is issuing this notice to advise the public of the twenty third meeting of RTCA Special Committee 203, Unmanned...

  20. 75 FR 61819 - First Meeting: RTCA Special Committee 224: Airport Security Access Control Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-06

    ... Federal Aviation Administration First Meeting: RTCA Special Committee 224: Airport Security Access Control... meeting: Airport Security Access Control Systems (Update to DO-230B). SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 224: Airport Security Access...

  1. 76 FR 60079 - Landmarks Committee of the National Park System Advisory Board Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-28

    ... National Park Service Landmarks Committee of the National Park System Advisory Board Meeting AGENCY: National Park Service. ACTION: Notice of meeting. SUMMARY: Notice is hereby given in accordance with the Federal Advisory Committee Act , that a meeting of the Landmarks Committee of the National Park...

  2. 77 FR 14420 - Landmarks Committee of the National Park System Advisory Board Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-09

    ... National Park Service Landmarks Committee of the National Park System Advisory Board Meeting AGENCY: National Park Service. ACTION: Notice of Meeting. SUMMARY: Notice is hereby given in accordance with the Federal Advisory Committee Act , that a meeting of the Landmarks Committee of the National Park...

  3. 76 FR 55701 - Landmarks Committee of the National Park System Advisory Board Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-08

    ... National Park Service Landmarks Committee of the National Park System Advisory Board Meeting AGENCY: National Park Service. ACTION: Notice of meeting. SUMMARY: Notice is hereby given in accordance with the Federal Advisory Committee Act , that a meeting of the Landmarks Committee of the National Park...

  4. 76 FR 37356 - 2011 Scientific Meeting of the National Antimicrobial Resistance Monitoring System; Public...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-27

    ... HUMAN SERVICES Food and Drug Administration 2011 Scientific Meeting of the National Antimicrobial Resistance Monitoring System; Public Meeting; Request for Comments AGENCY: Food and Drug Administration, HHS. ACTION: Notice of public meeting; request for comments. The Food and Drug Administration (FDA)...

  5. 75 FR 71790 - Second Meeting: RTCA Special Committee 224: Airport Security Access Control Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-24

    ... Federal Aviation Administration Second Meeting: RTCA Special Committee 224: Airport Security Access... Committee 224 meeting: Airport Security Access Control Systems (Update to DO-230B). SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 224: Airport...

  6. 76 FR 50811 - Eighth Meeting: RTCA Special Committee 224: Airport Security Access Control Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-16

    ... TRANSPORTATION Federal Aviation Administration Eighth Meeting: RTCA Special Committee 224: Airport Security... Committee 224 meeting: Airport Security Access Control Systems. SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 224: Airport Security Access Control...

  7. 78 FR 51810 - Twenty-Fourth Meeting: RTCA Special Committee 224, Airport Security Access Control Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-21

    ... Transportation (DOT). ACTION: Meeting Notice of RTCA Special Committee 224, Airport Security Access Control... RTCA Special Committee 224, Airport Security Access Control Systems. DATES: The meeting will be held on... TRANSPORTATION Federal Aviation Administration Twenty-Fourth Meeting: RTCA Special Committee 224,...

  8. 76 FR 59481 - Ninth Meeting: RTCA Special Committee 224: Airport Security Access Control Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-26

    ... TRANSPORTATION Federal Aviation Administration Ninth Meeting: RTCA Special Committee 224: Airport Security Access... Committee 224 meeting: Airport Security Access Control Systems. SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 224: Airport Security Access Control...

  9. 76 FR 9632 - Fifth Meeting: RTCA Special Committee 224: Airport Security Access Control Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-18

    ... Federal Aviation Administration Fifth Meeting: RTCA Special Committee 224: Airport Security Access Control... meeting: Airport Security Access Control Systems (Update to DO-230B). SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 224: Airport Security Access...

  10. 75 FR 80886 - Third Meeting: RTCA Special Committee 224: Airport Security Access Control Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-23

    ... Federal Aviation Administration Third Meeting: RTCA Special Committee 224: Airport Security Access Control... meeting: Airport Security Access Control Systems (Update to DO-230B). SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 224: Airport Security Access...

  11. 76 FR 38742 - Seventh Meeting: RTCA Special Committee 224: Airport Security Access Control Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-01

    ... Federal Aviation Administration Seventh Meeting: RTCA Special Committee 224: Airport Security Access... Committee 224 meeting: Airport Security Access Control Systems (Update to DO-230B). SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 224: Airport...

  12. 76 FR 16470 - Sixth Meeting: RTCA Special Committee 224: Airport Security Access Control Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-23

    ... Federal Aviation Administration Sixth Meeting: RTCA Special Committee 224: Airport Security Access Control... meeting: Airport Security Access Control Systems (Update to DO-230B). SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 224: Airport Security Access...

  13. 76 FR 3931 - Fourth Meeting: RTCA Special Committee 224: Airport Security Access Control Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-21

    ... Federal Aviation Administration Fourth Meeting: RTCA Special Committee 224: Airport Security Access... Committee 224 Meeting: Airport Security Access Control Systems (Update to DO-230B). SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 224: Airport...

  14. Immobilization of ɛ-polylysine onto the probe surface for molecular adsorption type endotoxin detection system

    NASA Astrophysics Data System (ADS)

    Ooe, Katsutoshi; Tsuji, Akihito; Nishishita, Naoki; Hirano, Yoshiaki

    2007-04-01

    adsorption reaction between ɛ-polylysine and endotoxin. ɛ-polylysine has the structure of straight chain molecule composed by 25-30 residues made by lysine, and it is used as an antimicrobial agent, moreover, cellulose beads with immobilized ɛ-polylysine is used as the barrier filter for endotoxin removal. Therefore, it is expected that the endotoxin be adsorbed to the immobilized ɛ-polylysine onto the probe. As the result of this reaction, the mass of the probe is increased, and endotoxin can be detected by using of Quartz Crystal Microbalance (QCM). In our previous research, we have already acquired the proteins immobilization technique onto Au and Si surface. In this report, the proposal of molecular adsorption type endotoxin detection system, and the immobilization of ɛ-polylysine onto the probe are described. We use X-ray Photoelectron Spectroscopy (XPS) to confirm the ɛ-polylysine immobilization, and the adsorptive activity of immobilized ɛ-polylysine is measured by XPS and AFM. The purpose of this study is to bring about the realization of "Real-time endotoxin detection system".

  15. Phase 2 Methyl Iodide Deep-Bed Adsorption Tests

    SciTech Connect

    Soelberg, Nick; Watson, Tony

    2014-09-01

    Nuclear fission produces fission products (FPs) and activation products, including iodine-129, which could evolve into used fuel reprocessing facility off-gas systems, and could require off-gas control to limit air emissions to levels within acceptable emission limits. Research, demonstrations, and some reprocessing plant experience have indicated that diatomic iodine can be captured with efficiencies high enough to meet regulatory requirements. Research on the capture of organic iodides has also been performed, but to a lesser extent. Several questions remain open regarding the capture of iodine bound in organic compounds. Deep-bed methyl iodide adsorption testing has progressed according to a multi-laboratory methyl iodide adsorption test plan. This report summarizes the second phase of methyl iodide adsorption work performed according to this test plan using the deep-bed iodine adsorption test system at the Idaho National Laboratory (INL), performed during the second half of Fiscal Year (FY) 2014. Test results continue to show that methyl iodide adsorption using AgZ can achieve total iodine decontamination factors (DFs, ratios of uncontrolled and controlled total iodine levels) above 1,000, until breakthrough occurred. However, mass transfer zone depths are deeper for methyl iodide adsorption compared to diatomic iodine (I2) adsorption. Methyl iodide DFs for the Ag Aerogel test adsorption efficiencies were less than 1,000, and the methyl iodide mass transfer zone depth exceeded 8 inches. Additional deep-bed testing and analyses are recommended to (a) expand the data base for methyl iodide adsorption under various conditions specified in the methyl iodide test plan, and (b) provide more data for evaluating organic iodide reactions and reaction byproducts for different potential adsorption conditions.

  16. Construction of a high efficiency copper adsorption bacterial system via peptide display and its application on copper dye polluted wastewater.

    PubMed

    Maruthamuthu, Murali Kannan; Nadarajan, Saravanan Prabhu; Ganesh, Irisappan; Ravikumar, Sambandam; Yun, Hyungdon; Yoo, Ik-Keun; Hong, Soon Ho

    2015-11-01

    For the construction of an efficient copper waste treatment system, a cell surface display strategy was employed. The copper adsorption ability of recombinant bacterial strains displaying three different copper binding peptides were evaluated in LB Luria-Bertani medium (LB), artificial wastewater, and copper phthalocyanine containing textile dye industry wastewater samples. Structural characteristics of the three peptides were also analyzed by similarity-based structure modeling. The best binding peptide was chosen for the construction of a dimeric peptide display and the adsorption ability of the monomeric and dimeric peptide displayed strains were compared. The dimeric peptide displayed strain showed superior copper adsorption in all three tested conditions (LB, artificial wastewater, and textile dye industry wastewater). When the strains were exposed to copper phthalocyanine dye polluted wastewater, the dimeric peptide display [543.27 µmol/g DCW dry cell weight (DCW)] showed higher adsorption of copper when compared with the monomeric strains (243.53 µmol/g DCW). PMID:26219270

  17. Adsorption mechanism of mixed cationic/anionic collectors in feldspar-quartz flotation system.

    PubMed

    Vidyadhar, A; Hanumantha Rao, K

    2007-02-15

    The adsorption mechanism of mixed cationic alkyl diamine and anionic sulfonate/oleate collectors at acidic pH values was investigated on microcline and quartz minerals through Hallimond flotation, electrokinetic and diffuse reflectance FTIR studies. In the presence of anionic collectors, neither of the minerals responded to flotation but the diamine flotation of the minerals was observed to be pH and concentration dependent. The presence of sulfonate enhanced the diamine flotation of the minerals by its co-adsorption. The difference in surface charge between the minerals at pH 2 was found to be the basis for preferential feldspar flotation from quartz in mixed diamine/sulfonate collectors. The infrared spectra revealed no adsorption of sulfonate collector when used alone but displayed its co-adsorption as diamine-sulfonate complex when used with diamine. The presence of sulfonate increased the diamine adsorption due to a decrease in the electrostatic head-head repulsion between the adjacent surface ammonium ions and thereby increasing the lateral tail-tail hydrophobic bonds. The mole ratio of diamine/sulfonate was found to be an important factor in the orientation of alkyl chains and thus the flotation response of minerals. The increase in sulfonate concentration beyond diamine concentration leads to the formation of soluble 1:2 diamine-sulfonate complex or precipitate and the adsorption of these species decreased the flotation since the alkyl chains are in chaotical orientation with a conceivable number of head groups directing towards the solution phase.

  18. 77 FR 49851 - Nineteenth Meeting: RTCA Special Committee 216, Aeronautical Systems Security (Joint Meeting With...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-17

    .... ADDRESSES: The meeting will be held at EASA, Ottoplatz 1, 50679 Koln, Germany. Contact Cyrille Rosay for information at 49-221-899-90-4045 or fax: 49-221-899-90-4545, or email: cyrille.rosay@ease.europa.eu ....

  19. 78 FR 24160 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-24

    ... Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC) will meet on May 7 and 8... information systems equipment and technology. Tuesday, May 7 Open Session 1. Welcome and Introductions....

  20. 76 FR 39845 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-07

    ... Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC) will meet on July 27 and 28... information systems equipment and technology. Wednesday, July 27 Public Session 1. Welcome and...

  1. 75 FR 64258 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-19

    ... Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC) will meet on November 3 and 4... information systems equipment and technology. Wednesday, November 3 Public Session 1. Welcome...

  2. 77 FR 1666 - Information Systems, Technical Advisory Committee; Notice of Partially Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-11

    ... Bureau of Industry and Security Information Systems, Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC) will meet on January 25 and... technical questions that affect the level of export controls applicable to information systems equipment...

  3. 76 FR 64895 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-19

    ... Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC) will meet on November 2 and 3... information systems equipment and technology. Wednesday, November 2 Public Session 1. Welcome...

  4. 78 FR 31627 - Twenty-Second Meeting: RTCA Special Committee 224, Airport Security Access Control Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-24

    ... Control Systems AGENCY: Federal Aviation Administration (FAA), U.S. Department of Transportation (DOT). ACTION: Meeting Notice of RTCA Special Committee 224, Airport Security Access Control Systems. SUMMARY... Committee 224, Airport Security Access Control Systems. DATES: The meeting will be held on June 20,...

  5. 78 FR 7850 - Nineteenth Meeting: RTCA Special Committee 224, Airport Security Access Control Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-04

    ... Control Systems AGENCY: Federal Aviation Administration (FAA), U.S. Department of Transportation (DOT). ACTION: Meeting Notice of RTCA Special Committee 224, Airport Security Access Control Systems. SUMMARY... Committee 224, Airport Security Access Control Systems. DATES: The meeting will be held February 21,...

  6. 77 FR 56254 - 89th Meeting: RTCA Special Committee 159, Global Positioning Systems (GPS)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-12

    ... Federal Aviation Administration 89th Meeting: RTCA Special Committee 159, Global Positioning Systems (GPS... Notice of RTCA Special Committee 159, RTCA Special Committee 159, Global Positioning Systems (GPS... Special Committee 159, Global Positioning Systems (GPS). DATES: The meeting will be held October 5,...

  7. 78 FR 57672 - 91st Meeting: RTCA Special Committee 159, Global Positioning Systems (GPS)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-19

    ... Federal Aviation Administration 91st Meeting: RTCA Special Committee 159, Global Positioning Systems (GPS... Notice of RTCA Special Committee 159, RTCA Special Committee 159, Global Positioning Systems (GPS... Special Committee 159, Global Positioning Systems (GPS) DATES: The meeting will be held October 7-11,...

  8. 78 FR 13396 - 90th Meeting: RTCA Special Committee 159, Global Positioning Systems (GPS)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-27

    ... Federal Aviation Administration 90th Meeting: RTCA Special Committee 159, Global Positioning Systems (GPS... Notice of RTCA Special Committee 159, RTCA Special Committee 159, Global Positioning Systems (GPS... Special Committee 159, Global Positioning Systems (GPS). DATES: The meeting will be held March 12-15,...

  9. 77 FR 12106 - 88th Meeting: RTCA Special Committee 159, Global Positioning System (GPS)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-28

    ... Federal Aviation Administration 88th Meeting: RTCA Special Committee 159, Global Positioning System (GPS... RTCA Special Committee 159, Global Positioning System (GPS). SUMMARY: The FAA is issuing this notice to advise the public of the 88th meeting of RTCA Special Committee 159, Global Positioning System...

  10. Implementing Earth Systems Science, K-16: Results of the 2005 Coalition for Earth Systems Education Meeting

    NASA Astrophysics Data System (ADS)

    Ireton, F.; Carpenter, J.; Lewis, G.; Leck, J.

    2005-12-01

    The 2005 Coalition for Earth Systems Education meeting was held at NASA's Goddard Space Flight Center on September 23-24. The focus of the meeting was on increasing and improving implementation of the Earth System Science (ESS) in K-16 schools by creating a large-scale effort and unified voice to bring about greater and more widespread teaching of ESS. The goals of the meeting where: (1) to establish action items to work toward overcoming barriers to implementation of ESS and (2) to facilitate development of partnerships and collaborations to work on selected action items. Presentations from invited speakers highlighted related ESS initiatives, including status of the Revolution in K-12 Earth and Space Science Education and efforts in Texas and California to keep Earth science in state curricula. A special session featured information on federal education opportunities and initiatives-NSF, NASA, NOAA, and USGS. During a morning plenary session attendees worked collaboratively to determine which barriers to broader implementation are most significant then, based on the outcome, moved to breakout groups to develop working plans and action plans and to create partnerships for addressing action items. An interactive poster session allowed attendees to share projects they were working on. Attendees represented a broad cross section of the ESS community including representatives from ESS research, museums and science centers, federal agencies, professional and scientific societies, and university and K-12 schools. This paper will provide a backdrop for events leading up to the meeting, lessons learned during the meeting, and resulting projects.

  11. A filtration and column-adsorption system for onsite concentration and fractionation of organic substances from large volumes of water

    USGS Publications Warehouse

    Leenheer, J.A.; Noyes, T.I.

    1984-01-01

    A portable filtration and column-adsorption system which can concentrate suspended sediment and dissolved-aqueous organic substances onsite was developed. Organic solutes also are fractionated into hydrophobic- and hydrophilic-acid, base, and neutral fractions. Subsequent isolation of organic solutes from fraction concentrates and extraction of organic constituents in suspended sediment entrained on filter tubes is performed by a variety of procedures in the laboratory. Three surface-water samples and one ground-water sample ranging in volume from 300 to 1,100 liters were processed through the filtration and column-adsorption system, yielding from about 0.8 to 3.0 grams of recovered organic carbon per sample.

  12. Modelling Cu(II) adsorption to ferrihydrite and ferrihydrite-bacteria composites: Deviation from additive adsorption in the composite sorption system

    NASA Astrophysics Data System (ADS)

    Moon, Ellen M.; Peacock, Caroline L.

    2013-03-01

    Bacterially associated iron (hydr)oxides are widespread in natural environments and are potent scavengers of dissolved metal ions. However, it is unclear whether metal sorption on these composites adheres to the additivity principle, and thus whether metal concentrations in environments where these composites comprise a significant proportion of the reactive iron phases can be modelled assuming component additivity. Here we address this issue for Cu adsorption on ferrihydrite-Bacillus subtilis composites. We precipitated pure ferrihydrite and ferrihydrite composites with different ferrihydrite:bacteria mass ratios, and measured Cu adsorption as a function of pH, Cu adsorbed concentration and composite mass ratio. We develop a molecular-level surface complexation model for Cu adsorption on pure ferrihydrite. We then combine our end-member models for Cu adsorption on B. subtilis (Moon and Peacock, 2011) and ferrihydrite to model the observed Cu adsorption on the composites, adopting a component linear additivity approach. By comparing observed Cu adsorption to that predicted by our composite model, constrained to the exact best fitting end-member stability constants, we find that Cu adsorption behaviour on ferrihydrite-B. subtilis composites deviates from additivity. Specifically, Cu adsorption on composites composed mainly of ferrihydrite is enhanced across the adsorption pH edge (pH ˜3-6), while on our composite composed mainly of bacteria adsorption is enhanced at mid-high pH (pH ˜5-6) but diminished at mid-low pH (pH ˜5-3), compared to additivity. In current surface complexation modelling constructs, Cu adsorption on composites composed mainly of ferrihydrite can be modelled in a component additivity approach, by optimising the stability constants for Cu adsorption on the ferrihydrite and bacteria fractions to values that are within the uncertainty on the end-member stability constant values. The deviation from additivity of these composites, apparent when

  13. A cost-effective system for in-situ geological arsenic adsorption from groundwater.

    PubMed

    Shan, Huimei; Ma, Teng; Wang, Yanxin; Zhao, Jie; Han, Hongyin; Deng, Yamin; He, Xin; Dong, Yihui

    2013-11-01

    An effective and low-cost in-situ geological filtration system was developed to treat arsenic-contaminated groundwater in remote rural areas. Hangjinhouqi in western Hetao Plain of Inner Mongolia, China, where groundwater contains a high arsenic concentration, was selected as the study area. Fe-mineral and limestone widely distributed in the study area were used as filter materials. Batch and column experiments as well as field tests were performed to determine optimal filtration parameters and to evaluate the effectiveness of the technology for arsenic removal under different hydrogeochemical conditions. A mixture containing natural Fe-mineral (hematite and goethite) and limestone at a mass ratio of 2:1 was found to be the most effective for arsenic removal. The results indicated that Fe-mineral in the mixture played a major role for arsenic removal. Meanwhile, limestone buffered groundwater pH to be conducive for the optimal arsenic removal. As(III) adsorption and oxidation by iron mineral, and the formation of Ca-As(V) precipitation with Ca contributed from limestone dissolution were likely mechanisms leading to the As removal. Field demonstrations revealed that a geological filter bed filled with the proposed mineral mixture reduced groundwater arsenic concentration from 400 μg/L to below 10 μg/L. The filtration system was continuously operated for a total volume of 365,000L, which is sufficient for drinking water supplying a rural household of 5 persons for 5 years at a rate of 40 L per person per day.

  14. Impact on quality activities of measurement systems meeting an L:1 rule

    DOE PAGES

    Hamada, M. S.; Burkhardt, J. H.

    2016-04-01

    This study considers the impact of a measurement system that meets an L:1 rule on various quality activities. These activities include inspection, acceptance sampling, and control charting. A measurement system that meets a 10:1 rule performs much better than one that meets a 4:1 rule. R code is provided so that the practitioner is able to evaluate these activities to his or her particular situation.

  15. Impact on quality activities of measurement systems meeting an L:1 rule

    SciTech Connect

    Hamada, M. S.; Burkhardt, J. H.

    2015-04-30

    This study considers the impact of a measurement system that meets an L:1 rule on various quality activities. These activities include inspection, acceptance sampling, and control charting. A measurement system that meets a 10:1 rule performs much better than one that meets a 4:1 rule. R code is provided so that the practitioner is able to evaluate these activities to his or her particular situation.

  16. Temperature Swing Adsorption Compressor Development

    NASA Technical Reports Server (NTRS)

    Finn, John E.; Mulloth, Lila M.; Affleck, Dave L.

    2001-01-01

    Closing the oxygen loop in an air revitalization system based on four-bed molecular sieve and Sabatier reactor technology requires a vacuum pump-compressor that can take the low-pressure CO, from the 4BMS and compress and store for use by a Sabatier reactor. NASA Ames Research Center proposed a solid-state temperature-swing adsorption (TSA) compressor that appears to meet performance requirements, be quiet and reliable, and consume less power than a comparable mechanical compressor/accumulator combination. Under this task, TSA compressor technology is being advanced through development of a complete prototype system. A liquid-cooled TSA compressor has been partially tested, and the rest of the system is being fabricated. An air-cooled TSA compressor is also being designed.

  17. System Modeling of Metabolic Heat Regenerated Temperature Swing Adsorption (MTSA) Subassembly for Prototype Design

    NASA Technical Reports Server (NTRS)

    Bower, Chad; Padilla, Sebastian; Iacomini, Christie; Paul, Heather L.

    2009-01-01

    This paper describes modeling methods for the three core components of a Metabolic heat regenerated Temperature Swing Adsorption (MTSA) subassembly: the sorbent bed, a sublimation (cooling) heat exchanger (SHX), and a condensing icing (warming) heat exchanger (CIHX). The primary function of the MTSA, removing carbon dioxide from a ventilation loop, is performed via the sorbent bed. The CIHX is used to heat the sorbent bed for desorption and to remove moisture from the ventilation loop while the SHX is alternately employed to cool the sorbent bed via sublimation of a spray of water at low pressure to prepare the reconditioned bed for the next cycle. This paper describes a system level model of the MTSA as developed in Thermal Desktop and SINDA/FLUINT including assumptions on geometry and physical phenomena, modeling methodology and relevant pa ra mete rizatio ns. Several areas of particular modeling interest are discussed. In the sorbent bed, capture of the translating CO2 saturation front and associated local energy and mass balance in both adsorbing and desorbing modes is covered. The CIHX poses particular challenges for modeling in SINDA/FLUINT as accounting for solids states in fluid submodels are not a native capability. Methods for capturing phase change and latent heat of ice as well as the transport properties across a layer of low density accreted frost are developed. This extended modeling capacity is applicable to temperatures greater than 258 K. To extend applicability to the minimum device temperature of 235 K, a method for a mapped transformation of temperatures from below the limit temperatures to some value above is given along with descriptions for associated material property transformations and the resulting impacts to total heat and mass transfer. Similar considerations are shown for the SHX along with assumptions for flow mechanics and resulting model methods for sublimation in a flow.

  18. 40 CFR 63.2490 - What requirements must I meet for heat exchange systems?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 12 2010-07-01 2010-07-01 true What requirements must I meet for heat... must I meet for heat exchange systems? (a) You must comply with each requirement in Table 10 to this subpart that applies to your heat exchange systems, except as specified in paragraphs (b) and (c) of...

  19. 40 CFR 63.2490 - What requirements must I meet for heat exchange systems?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 13 2013-07-01 2012-07-01 true What requirements must I meet for heat... requirements must I meet for heat exchange systems? (a) You must comply with each requirement in Table 10 to this subpart that applies to your heat exchange systems, except as specified in paragraphs (b) and...

  20. 40 CFR 63.2490 - What requirements must I meet for heat exchange systems?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 13 2012-07-01 2012-07-01 false What requirements must I meet for heat... requirements must I meet for heat exchange systems? (a) You must comply with each requirement in Table 10 to this subpart that applies to your heat exchange systems, except as specified in paragraphs (b) and...

  1. 40 CFR 63.2490 - What requirements must I meet for heat exchange systems?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 12 2011-07-01 2009-07-01 true What requirements must I meet for heat... must I meet for heat exchange systems? (a) You must comply with each requirement in Table 10 to this subpart that applies to your heat exchange systems, except as specified in paragraphs (b) and (c) of...

  2. 40 CFR 63.2490 - What requirements must I meet for heat exchange systems?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 13 2014-07-01 2014-07-01 false What requirements must I meet for heat... requirements must I meet for heat exchange systems? (a) You must comply with each requirement in Table 10 to this subpart that applies to your heat exchange systems, except as specified in paragraphs (b) and...

  3. 78 FR 70558 - FDIC Systemic Resolution Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-26

    ... CORPORATION FDIC Systemic Resolution Advisory Committee; Notice of Meeting AGENCY: Federal Deposit Insurance... U.S.C. App. 2, notice is hereby given of a meeting of the FDIC Systemic Resolution Advisory... will provide advice and recommendations on a broad range of issues regarding the resolution...

  4. 77 FR 70162 - FDIC Systemic Resolution Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-23

    ... CORPORATION FDIC Systemic Resolution Advisory Committee; Notice of Meeting AGENCY: Federal Deposit Insurance... U.S.C. App. 2, notice is hereby given of a meeting of the FDIC Systemic Resolution Advisory... will provide advice and recommendations on a broad range of issues regarding the resolution...

  5. 77 FR 1490 - FDIC Systemic Resolution Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-10

    ... CORPORATION FDIC Systemic Resolution Advisory Committee; Notice of Meeting AGENCY: Federal Deposit Insurance... U.S.C. App. 2, notice is hereby given of a meeting of the FDIC Systemic Resolution Advisory... will provide advice and recommendations on a broad range of issues regarding the resolution...

  6. 78 FR 38093 - Seventh Meeting: RTCA Special Committee 226, Audio Systems and Equipment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-25

    ... Federal Aviation Administration Seventh Meeting: RTCA Special Committee 226, Audio Systems and Equipment... Notice of RTCA Special Committee 226, Audio Systems and Equipment. SUMMARY: The FAA is issuing this... Equipment ] DATES: The meeting will be held July 15-19, 2013 from 9:00 a.m.-5:00 p.m. ADDRESSES: The...

  7. 77 FR 3029 - Twentieth Meeting: RTCA Special Committee 203, Unmanned Aircraft Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-20

    ... Federal Aviation Administration Twentieth Meeting: RTCA Special Committee 203, Unmanned Aircraft Systems... RTCA Special Committee 203, Unmanned Aircraft Systems. SUMMARY: The FAA is issuing this notice to advise the public of the twentieth meeting of RTCA Special Committee 203, Unmanned Aircraft...

  8. 75 FR 26321 - Seventeenth Plenary Meeting: RTCA Special Committee 203: Unmanned Aircraft Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-11

    ... Federal Aviation Administration Seventeenth Plenary Meeting: RTCA Special Committee 203: Unmanned Aircraft Systems AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of RTCA Special Committee 203... RTCA Special Committee 203: Unmanned Aircraft Systems. DATES: The meeting will be held June 8-10,...

  9. 77 FR 23277 - Wekiva River System Advisory Management Committee Meetings (FY2012)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-18

    ... National Park Service Wekiva River System Advisory Management Committee Meetings (FY2012) AGENCY: National Park Service, Interior. ACTION: Notice of upcoming scheduled meetings. SUMMARY: This notice announces a... statement should be addressed to the Wekiva River System Advisory Management Committee, National...

  10. 75 FR 49550 - Fifth Meeting: RTCA Special Committee 219: Attitude and Heading Reference System (AHRS)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-13

    ... Federal Aviation Administration Fifth Meeting: RTCA Special Committee 219: Attitude and Heading Reference...: Notice of RTCA Special Committee 219: Attitude and Heading Reference System (AHRS). SUMMARY: The FAA is... Heading Reference System (AHRS). DATES: The meeting will be held September 14-16, 2010 from 9 a.m. to 5...

  11. 77 FR 16858 - Meeting of the National Park System Advisory Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-22

    ... National Park Service Meeting of the National Park System Advisory Board AGENCY: National Park Service... Regulations, that the National Park System Advisory Board will meet May 22-23, 2012, in Denver, Colorado. The... matter listed in this notice will be accepted by the National Park Service until May 21, 2012. (b)...

  12. 76 FR 60526 - Meeting of the National Park System Advisory Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-29

    ... National Park Service Meeting of the National Park System Advisory Board AGENCY: National Park Service... Regulations, that the National Park System Advisory Board will meet December 1-2, 2011, in Key Largo, Florida... Landmarks matter listed in this notice will be accepted by the National Park Service until November 28,......

  13. 77 FR 53230 - Landmarks Committee of the National Park System Advisory Board Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-31

    ... National Park Service Landmarks Committee of the National Park System Advisory Board Meeting AGENCY: National Park Service, Interior. ACTION: Notice of meeting. SUMMARY: Notice is hereby given in accordance... Committee of the National Park System Advisory Board will be held beginning at 10 a.m. on November 7,...

  14. 78 FR 13377 - Landmarks Committee of the National Park System Advisory Board Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-27

    ... National Park Service Landmarks Committee of the National Park System Advisory Board Meeting AGENCY: National Park Service, Interior. ACTION: Notice of meeting. SUMMARY: Notice is hereby given in accordance... Landmarks Committee of the National Park System Advisory Board will be held beginning at 1:00 p.m. on...

  15. 75 FR 49520 - Landmarks Committee of the National Park System Advisory Board Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-13

    ... National Park Service Landmarks Committee of the National Park System Advisory Board Meeting AGENCY: National Park Service, Interior. ACTION: Notice of meeting. SUMMARY: Notice is hereby given in accordance... National Park System Advisory Board is to evaluate nominations of historic properties in order to...

  16. 77 FR 2343 - Eleventh Meeting: RTCA Special Committee 224, Airport Security Access Control Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-17

    ... Federal Aviation Administration Eleventh Meeting: RTCA Special Committee 224, Airport Security Access...). ACTION: Notice of RTCA Special Committee 224, Airport Security Access Control Systems. SUMMARY: The FAA..., Airport Security Access Control Systems. DATES: The meeting will be held February 9, 2012, from 10...

  17. Melanoidin Removal Mechanism in An Aqueous Adsorption System: An Equilibrium, Kinetic and Thermodynamic Study.

    PubMed

    Nunes, Diego L; Oliveira, Leandro S; Franca, Adriana S

    2015-01-01

    Melanoidins are colored products that can be found in food and drinks, formed by Maillard reactions. Sometimes these compounds are considered undesirable in certain food products, because they impart a brownish color and must be removed. An overview of recent patents related to melanoidin removal indicates that it can be performed by chemical/biological degradation or by adsorption processes. Therefore, in the present study, the adsorption mechanism for synthetic melanoidin removal from aqueous solutions was studied using different Raphanus sativus press-cake sorbents, with the precursor material being carbonized in a microwave oven, either with direct heating or after a chemical activation process with phosphoric acid, nitric acid or potassium hydroxide. Physical and chemical modifications were evaluated by FTIR, pHPZC, thermogravimetry and BET. The adsorption kinetics was better described by a pseudo-second order model for all activated carbons (ACs). Evaluation of the diffusion process showed dependence on the initial melanoidin concentration due to the wide range of sizes of the adsorbed molecules. The equilibrium data were best fitted by the Langmuir model for the acid-treated AC and by the Freundlich model for the base-treated and non-chemically treated ACs. Melanoidin adsorption was characterized as a spontaneous, favorable and endothermic process involving hydrogen bonds and π-π interactions between the adsorbents surfaces and the adsorbed molecules. PMID:26013772

  18. Design of a hybrid advective-diffusive microfluidic system with ellipsometric detection for studying adsorption.

    PubMed

    Wang, Lei; Zhao, Cunlu; Wijnperlé, Daniel; Duits, Michel H G; Mugele, Frieder

    2016-05-01

    Establishing and maintaining concentration gradients that are stable in space and time is critical for applications that require screening the adsorption behavior of organic or inorganic species onto solid surfaces for wide ranges of fluid compositions. In this work, we present a design of a simple and compact microfluidic device based on steady-state diffusion of the analyte, between two control channels where liquid is pumped through. The device generates a near-linear distribution of concentrations. We demonstrate this via experiments with dye solutions and comparison to finite-element numerical simulations. In a subsequent step, the device is combined with total internal reflection ellipsometry to study the adsorption of (cat)ions on silica surfaces from CsCl solutions at variable pH. Such a combined setup permits a fast determination of an adsorption isotherm. The measured optical thickness is compared to calculations from a triple layer model for the ion distribution, where surface complexation reactions of the silica are taken into account. Our results show a clear enhancement of the ion adsorption with increasing pH, which can be well described with reasonable values for the equilibrium constants of the surface reactions. PMID:27375818

  19. CO(2) adsorption on supported molecular amidine systems on activated carbon.

    PubMed

    Alesi, W Richard; Gray, McMahan; Kitchin, John R

    2010-08-23

    The CO(2) capture capacities for typical flue gas capture and regeneration conditions of two tertiary amidine N-methyltetrahydropyrimidine (MTHP) derivatives supported on activated carbon were determined through temperature-controlled packed-bed reactor experiments. Adsorption-desorption experiments were conducted at initial adsorption temperatures ranging from 29 degrees C to 50 degrees C with temperature-programmed regeneration under an inert purge stream. In addition to the capture capacity of each amine, the efficiencies at which the amidines interact with CO(2) were determined. Capture capacities were obtained for 1,5-diazo-bicyclo[4.3.0]non-5-ene (DBN) and 1,8-diazobicyclo[5.4.0]-undec-7-ene (DBU) supported on activated carbon at a loading of approximately 2.7 mol amidine per kg of sorbent. Moisture was found to be essential for CO(2) capture on the amidines, but parasitic moisture sorption on the activated carbon ultimately limited the capture capacities. DBN was shown to have a higher capture capacity of 0.8 mol CO(2) per kg of sorbent and an efficiency of 0.30 mol CO(2) per mol of amidine at an adsorption temperature of 29 degrees C compared to DBU. The results of these experiments were then used in conjunction with a single-site adsorption model to derive the Gibbs free energy for the capture reaction, which can provide information about the suitability of the sorbent under different operating conditions. PMID:20730982

  20. Competitive adsorption of Cd(II), Zn(II) and Ni(II) from their binary and ternary acidic systems using tourmaline.

    PubMed

    Liu, Haibin; Wang, Cuiping; Liu, Jingting; Wang, Baolin; Sun, Hongwen

    2013-10-15

    The adsorption of Cd(II), Zn(II) and Ni(II) from aqueous solutions in binary and ternary component systems by tourmaline was investigated. Kinetic data were accurately fitted to pseudo-second order and internal diffusion models, which indicated that the adsorption of heavy metals occurred on the interior surface of the sorbent and internal diffusion was the controlling mechanism during heavy metal ion adsorption but was not the only rate-controlling step. Additionally, tourmaline had a very good adsorption capacity for Cd(II), Zn(II) and Ni(II) in multi-component aqueous solutions at strongly acidic pH values (in contrast to industrial wastewater pH values). This good adsorption capacity is attributed to the fact that tourmaline can automatically adjust the pH values of acidic (except pH 2.0 and 3.0), neutral or alkaline aqueous solutions to 6.0. Adsorption isotherms and separation factors showed that tourmaline displays a high selectivity toward one metal in a two-component or a three-component system with an affinity order of Cd(II) > Zn(II) > Ni(II). Thermodynamic parameters indicated that heavy metal adsorption was feasible, spontaneous, and endothermic. Therefore, tourmaline should be explored as a material for removing pollutants from the strongly acidic wastewater. PMID:23851318

  1. Competitive adsorption of Cd(II), Zn(II) and Ni(II) from their binary and ternary acidic systems using tourmaline.

    PubMed

    Liu, Haibin; Wang, Cuiping; Liu, Jingting; Wang, Baolin; Sun, Hongwen

    2013-10-15

    The adsorption of Cd(II), Zn(II) and Ni(II) from aqueous solutions in binary and ternary component systems by tourmaline was investigated. Kinetic data were accurately fitted to pseudo-second order and internal diffusion models, which indicated that the adsorption of heavy metals occurred on the interior surface of the sorbent and internal diffusion was the controlling mechanism during heavy metal ion adsorption but was not the only rate-controlling step. Additionally, tourmaline had a very good adsorption capacity for Cd(II), Zn(II) and Ni(II) in multi-component aqueous solutions at strongly acidic pH values (in contrast to industrial wastewater pH values). This good adsorption capacity is attributed to the fact that tourmaline can automatically adjust the pH values of acidic (except pH 2.0 and 3.0), neutral or alkaline aqueous solutions to 6.0. Adsorption isotherms and separation factors showed that tourmaline displays a high selectivity toward one metal in a two-component or a three-component system with an affinity order of Cd(II) > Zn(II) > Ni(II). Thermodynamic parameters indicated that heavy metal adsorption was feasible, spontaneous, and endothermic. Therefore, tourmaline should be explored as a material for removing pollutants from the strongly acidic wastewater.

  2. Extending NASA's SPICE ancillary information system to meet future mission needs

    NASA Technical Reports Server (NTRS)

    Acton, C.; Bachman, N.; Elson, L.; Semenov, B.; Turner, F.; Wright, E.

    2002-01-01

    This paper summarizes the architecture, capabilities, characteristics and uses of the current SPICE ancillary information system, and then outlines plans and ideas for how this system can be extended to meet future space mission requirements.

  3. Towards a Consensus Annotation System (GSC8 Meeting)

    ScienceCinema

    White, Owen [University of Maryland

    2016-07-12

    The Genomic Standards Consortium was formed in September 2005. It is an international, open-membership working body which promotes standardization in the description of genomes and the exchange and integration of genomic data. The 2009 meeting was an activity of a five-year funding "Research Coordination Network" from the National Science Foundation and was organized held at the DOE Joint Genome Institute with organizational support provided by the JGI and by the University of California - San Diego. "Comparing Annotations: Towards Consensus Annotation" at the Genomic Standards Consortium's 8th meeting at the DOE JGI in Walnut Creek, Calif. on Sept. 10, 2009

  4. Adsorption of La(III) in aqueous systems by N-(2-hydroxyethyl) salicylaldimine-functionalized mesoporous silica

    SciTech Connect

    Tadjarodi, Azadeh Jalalat, Vahideh; Zare-Dorabei, Rouholah

    2015-01-15

    Highlights: • HESI-SBA-15 as a new adsorbent was synthesized for the first time. • This adsorbent was selective for lanthanum ion removal in presence of other ions. • The factors that affected adsorption of La(III) in aqueous solution were studied. • La{sup 3+} uptake process was according to pseudo-second-order kinetic model. - Abstract: In this work, a novel modified SBA-15 with covalently bonded N-(2-hydroxyethyl) salicylaldimine Schiff base as a ligand (HESI-SBA-15) was successfully synthesized, characterized and used as a selective absorbent for lanthanum ions removal from water systems. The structure and physicochemical properties were identified by elemental analysis, X-ray diffraction, nitrogen adsorption–desorption, thermogravimetric analysis and FTIR spectroscopy, scanning electron microscopy, BET surface area and BJH pore size. These techniques have confirmed that the Schiff base ligand was successfully grafted on the SBA-15 surface and ordered arrangement of the silica support was preserved under functionalization. The effect of pH, adsorbent dose, contact time, ionic strength and initial metal ions concentration were studied by using a batch method. This new adsorbent showed high adsorption capacity and selectivity for lanthanum in the presence of other ions. The adsorption process was exactly according to the pseudo-second-order kinetic model. The adsorbent showed a good reusability after four cycles recovery.

  5. Expert Meeting: Optimized Heating Systems Using Condensing Boilers and Baseboard Convectors

    SciTech Connect

    Arena, L.

    2013-01-01

    On August 11, 2011, in Denver, CO, a Building America Expert Meeting was held in conjunction with the Building America Residential Energy Efficiency Technical Update Meeting, to review and discuss results and future plans for research to improve the performance of hydronic heating systems using condensing boilers and baseboard convectors. A meeting objective was to provide an opportunity for other Building America teams and industry experts to provide feedback and specific suggestions for the planned research.

  6. Expert Meeting. Optimized Heating Systems Using Condensing Boilers and Baseboard Convectors

    SciTech Connect

    Arena, L.

    2013-01-01

    On August 11, 2011, in Denver, CO, a Building America Expert Meeting was held in conjunction with the Building America Residential Energy Efficiency Technical Update Meeting, to review and discuss results and future plans for research to improve the performance of hydronic heating systems using condensing boilers and baseboard convectors. A meeting objective was to provide an opportunity for other Building America teams and industry experts to provide feedback and specific suggestions for the planned research.

  7. Predicting Phase Diagram of the CaCl2-H2O Binary System from the BET Adsorption Isotherm

    SciTech Connect

    Ally, Moonis Raza

    2008-01-01

    A recent publication in Fluid Phase Equilibria by Zeng (Zeng, Zhou et al. 2007) claimed remarkable accuracy in predicting the solubility of CaCl2-H2O solutions with the Brunaruer-Emett-Teller (BET) model parameters. Their approach necessarily requires prior knowledge of equilibrium water vapor pressures above saturated solutions as a function of temperature for the hydrates of CaCl2 that exist under those conditions. However, the intrinsic BET model does not require prior knowledge of such solubility data that the approach of (Zeng, Zhou et al. 2007) is dependent upon. This paper highlights the differences between the two approaches and covers a much wider range of compositions and temperatures than is done by (Zeng, Zhou et al. 2007). The statistical mechanical description of multilayer adsorption culminating in the BET adsorption isotherm for aqueous electrolytes as developed by Ally and Braunstein (Ally and Braunstein 1993) is used to predict the liquidus behavior of CaCl2-H2O across the entire composition range (from the melting point of pure water to the melting point of anhydrous calcium chloride), including possible metastable crystalline phases. The method requires as input the two BET parameters r, the statistically averaged number of adsorption sites and ε, the energy of adsorption of water in excess of the energy of condensation of pure water. Usually it suffices to keep r and ε constant, typically evaluated at 298.15 K, but in the case of CaCl2-H2O, it is found that both r and ε must be considered temperature dependent in order to predict the liquidus curve, eutectic and peritectic points with reasonable accuracy over the large temperature and compositional range for this binary system.

  8. Transient Modeling and Analysis of a Metabolic Heat-Regenerated Temperature Swing Adsorption (MTSA) System for a PLSS

    NASA Technical Reports Server (NTRS)

    Iacomini, Christie; Powers, Aaron; Speight, Garland; Padilla, Sebastian; Paul, Heather L.

    2009-01-01

    A Metabolic heat-regenerated Temperature Swing Adsorption (MTSA) system is being developed for carbon dioxide, water and thermal control in a lunar and martian portable life support system (PLSS). A previous system analysis was performed to evaluate the impact of MTSA on PLSS design. That effort was Mars specific and assumed liquid carbon dioxide (LCO2) coolant made from martian resources. Transient effects were not considered but rather average conditions were used throughout the analysis. This effort takes into further consideration the transient effects inherent in the cycling MTSA system as well as assesses the use of water as coolant. Standard heat transfer, thermodynamic, and heat exchanger methods are presented to conduct the analysis. Assumptions and model verification are discussed. The tool was used to perform various system studies. Coolant selection was explored and takes into account different operational scenarios as the minimum bed temperature is driven by the sublimation temperature of the coolant (water being significantly higher than LCO2). From this, coolant mass is sized coupled with sorbent bed mass because MTSA adsorption performance decreases with increasing sublimation temperature. Reduction in heat exchanger performance and even removal of certain heat exchangers, like a recuperative one between the two sorbent beds, is also investigated. Finally, the coolant flow rate is varied over the cycle to determine if there is a more optimal means of cooling the bed from a mass perspective. Results of these studies and subsequent recommendations for system design are presented.

  9. Effects of Cabin Upsets on Adsorption Columns for Air Revitalization

    NASA Technical Reports Server (NTRS)

    LeVan, Douglas

    1999-01-01

    The National Aeronautics and Space Administration (NASA) utilizes adsorption technology as part of contaminant removal systems designed for long term missions. A variety of trace contaminants can be effectively removed from gas streams by adsorption onto activated carbon. An activated carbon adsorption column meets NASA's requirements of a lightweight and efficient means of controlling trace contaminant levels aboard spacecraft and space stations. The activated carbon bed is part of the Trace Contaminant Control System (TCCS) which is utilized to purify the cabin atmosphere. TCCS designs oversize the adsorption columns to account for irregular fluctuations in cabin atmospheric conditions. Variations in the cabin atmosphere include changes in contaminant concentrations, temperature, and relative humidity. Excessively large deviations from typical conditions can result from unusual crew activity, equipment malfunctions, or even fires. The research carried out under this award focussed in detail on the effects of cabin upsets on the performance of activated carbon adsorption columns. Both experiments and modeling were performed with an emphasis on the roll of a change in relative humidity on adsorption of trace contaminants. A flow through fixed-bed apparatus was constructed at the NASA Ames Research Center, and experiments were performed there. Modeling work was performed at the University of Virginia.

  10. Nitrogen rejection with pressure swing adsorption. Principles, design and remote control using an expert system

    SciTech Connect

    Buras, R.J.; Chan, A.; Mitariten, M.J.

    1995-11-01

    The rejection of nitrogen from low-quality natural gas has historically been accomplished through low-temperature cryogenic systems and generally applied to large volumes of gas. Until recently, the treatment of small gas volumes has presented difficulty in meeting economic targets. The Gas Research Institute (GRI) has indicated that in 1988, total nonassociated raw gas reserves in the lower 48 states was 144 TCF. Of these reserves, an estimated 19.2 TCF (13.3%) contain nitrogen greater than or equal to 4% and that only 1.7 TCF of this high nitrogen gas is in production. Nitrogen rejection from associated gas is also an expanding market and includes the applications of coal seam gas and GOB gas processing. UOP has developed and commercialized its NITREX process for these markets. This process separates nitrogen from methane through the cycling of multiple fixed beds of adsorbent. The NITREX system requires little pretreatment and is a shop-fabricated system with maximized skid mounting of components. The economic attractiveness of upgrading low-quality natural gas has been extended to low gas volumes through the use of this technology. POLYBED{reg_sign}PSA systems were first commercialized for the separation of light gases in 1966. This technology operates by using a fixed bed of adsorbent to adsorb gases of higher boiling points and molecular weights from lighter gases. Commercially attractive separations include the purification of hydrogen from light gases, the upgrading of raw helium for liquefaction and the manufacture of ultra pure methane for chemical plant feedstock.

  11. 76 FR 80447 - Eighth Meeting: RTCA Special Committee 219: Attitude and Heading Reference Systems (AHRS)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-23

    ... Federal Aviation Administration Eighth Meeting: RTCA Special Committee 219: Attitude and Heading Reference...). ACTION: Notice of RTCA Special Committee 219: Attitude and Heading Reference Systems (AHRS). SUMMARY: The FAA is issuing this notice to advise the public of the eighth meeting of RTCA Special Committee...

  12. 77 FR 2342 - Seventeenth Meeting: RTCA Special Committee 213, Enhanced Flight Vision/Synthetic Vision Systems...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-17

    ... Federal Aviation Administration Seventeenth Meeting: RTCA Special Committee 213, Enhanced Flight Vision... Transportation (DOT). ACTION: Notice of RTCA Special Committee 213, Enhanced Flight Vision/ Synthetic Vision... meeting of RTCA Special Committee 213, Enhanced Flight Vision/Synthetic Vision Systems (EFVS/SVS)....

  13. 76 FR 15338 - Landmarks Committee of the National Park System Advisory Board Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-21

    ... National Park Service Landmarks Committee of the National Park System Advisory Board Meeting AGENCY: National Park Service, Interior. ACTION: Notice of Meeting. SUMMARY: Notice is hereby given in accordance... Henry, National Historic Landmarks Program, National Park Service; 1849 C Street, NW. (2280);...

  14. Initial stages of adsorption in the Cu/Si( 1 1 1 ) system

    NASA Astrophysics Data System (ADS)

    Shukrinov, P.; Savchenkov, A.; Mutombo, P.; Cháb, V.; Slezák, J.

    2002-05-01

    The adsorption of Cu atoms on a Si(1 1 1)-7×7 surface was studied using scanning tunnelling microscopy. Two different kinds of clusters were found at room temperature and we associate them with copper atoms embedded in subsurface layers. Short annealing at ˜550 °C stimulates a reaction, leading to the substitution of corner Si adatoms in the 7×7 unit cell. This configuration is stable with respect to continuing thermal processing.

  15. 78 FR 55081 - Circulatory System Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-09

    ... HUMAN SERVICES Food and Drug Administration Circulatory System Devices Panel of the Medical Devices... (FDA). The meeting will be open to the public. Name of Committee: Circulatory System Devices Panel of... Monitoring System. The CardioMEMS HF System is a permanently implantable pressure measurement system...

  16. NASA Technical Interchange Meeting (TIM): Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box

    NASA Technical Reports Server (NTRS)

    ONeil, D. A.; Craig, D. A.; Christensen, C. B.; Gresham, E. C.

    2005-01-01

    The objective of this Technical Interchange Meeting was to increase the quantity and quality of technical, cost, and programmatic data used to model the impact of investing in different technologies. The focus of this meeting was the Technology Tool Box (TTB), a database of performance, operations, and programmatic parameters provided by technologists and used by systems engineers. The TTB is the data repository used by a system of models known as the Advanced Technology Lifecycle Analysis System (ATLAS). This report describes the result of the November meeting, and also provides background information on ATLAS and the TTB.

  17. Air-Cooled Design of a Temperature-Swing Adsorption Compressor for Closed-Loop Air Revitalization Systems

    NASA Technical Reports Server (NTRS)

    Mulloth, Lila M.; Affleck, Dave L.; Rosen, Micha; LeVan, M. Douglas; Wang, Yuan; Cavalcante, Celio L.

    2004-01-01

    The air revitalization system of the International Space Station (ISS) operates in an open loop mode and relies on the resupply of oxygen and other consumables from earth for the life support of astronauts. A compressor is required for delivering the carbon dioxide from a removal assembly to a reduction unit to recover oxygen and thereby closing the air-loop. We have a developed a temperature-swing adsorption compressor (TSAC) for performing these tasks that is energy efficient, quiet, and has no rapidly moving parts. This paper discusses the mechanical design and the results of thermal model validation tests of a TSAC that uses air as the cooling medium.

  18. V-ROOM: a virtual meeting system with intelligent structured summarisation

    NASA Astrophysics Data System (ADS)

    James, Anne E.; Nanos, Antonios G.; Thompson, Philip

    2016-10-01

    With the growth of virtual organisations and multinational companies, virtual collaboration tasks are becoming more important for employees. This paper describes the development of a virtual meeting system called V-ROOM. An exploration of facilities required in such a system has been conducted. The findings highlighted that intelligent systems are needed, especially since information that individuals have to know and process is vast. The survey results showed that meeting summarisation is one of the most important new features that should be added to virtual meeting systems for enterprises. This paper highlights the innovative methods employed in V-ROOM to produce relevant meeting summaries. V-ROOM's approach is compared to other methods from the literature, and it is shown how the use of metadata provided by parts of the V-ROOM system can improve the quality of summaries produced.

  19. Polymer adsorption

    NASA Astrophysics Data System (ADS)

    Joanny, Jean-Francois

    2008-03-01

    The aim of this talk is to review Pierre-Gilles deGennes' work on polymer adsorption and the impact that it has now in our understanding of this problem. We will first present the self-consistent mean-field theory and its applications to adsorption and depletion. De Gennes most important contribution is probably the derivation of the self-similar power law density profile for adsorbed polymer layers that we will present next, emphasizing the differences between the tail sections and the loop sections of the adsorbed polymers. We will then discuss the kinetics of polymer adsorption and the penetration of a new polymer chain in an adsobed layer that DeGennes described very elegantly in analogy with a quantum tunneling problem. Finally, we will discuss the role of polymer adsorption for colloid stabilization.

  20. Effect of organic matter properties, clay mineral type and thermal maturity on gas adsorption in organic-rich shale systems

    USGS Publications Warehouse

    Zhang, Tongwei; Ellis, Geoffrey S.; Ruppel, Stephen C.; Milliken, Kitty; Lewan, Mike; Sun, Xun; Baez, Luis; Beeney, Ken; Sonnenberg, Steve

    2013-01-01

    A series of CH4 adsorption experiments on natural organic-rich shales, isolated kerogen, clay-rich rocks, and artificially matured Woodford Shale samples were conducted under dry conditions. Our results indicate that physisorption is a dominant process for CH4 sorption, both on organic-rich shales and clay minerals. The Brunauer–Emmett–Teller (BET) surface area of the investigated samples is linearly correlated with the CH4 sorption capacity in both organic-rich shales and clay-rich rocks. The presence of organic matter is a primary control on gas adsorption in shale-gas systems, and the gas-sorption capacity is determined by total organic carbon (TOC) content, organic-matter type, and thermal maturity. A large number of nanopores, in the 2–50 nm size range, were created during organic-matter thermal decomposition, and they significantly contributed to the surface area. Consequently, methane-sorption capacity increases with increasing thermal maturity due to the presence of nanopores produced during organic-matter decomposition. Furthermore, CH4 sorption on clay minerals is mainly controlled by the type of clay mineral present. In terms of relative CH4 sorption capacity: montmorillonite ≫ illite – smectite mixed layer > kaolinite > chlorite > illite. The effect of rock properties (organic matter content, type, maturity, and clay minerals) on CH4 adsorption can be quantified with the heat of adsorption and the standard entropy, which are determined from adsorption isotherms at different temperatures. For clay-mineral rich rocks, the heat of adsorption (q) ranges from 9.4 to 16.6 kJ/mol. These values are considerably smaller than those for CH4 adsorption on kerogen (21.9–28 kJ/mol) and organic-rich shales (15.1–18.4 kJ/mol). The standard entropy (Δs°) ranges from -64.8 to -79.5 J/mol/K for clay minerals, -68.1 to -111.3 J/mol/K for kerogen, and -76.0 to -84.6 J/mol/K for organic-rich shales. The affinity of CH4 molecules for sorption on organic matter

  1. An adsorption-release-biodegradation system for simultaneous biodegradation of phenol and ammonium in phenol-rich wastewater.

    PubMed

    Wang, Ying; Chen, Hu; Liu, Yu-Xiang; Ren, Rui-Peng; Lv, Yong-Kang

    2016-07-01

    The feasibility of simultaneous biodegradation of phenol and ammonium in phenol-rich wastewater was evaluated in a reusable system, which contained macroporous adsorption resin and Alcaligenes faecalis strain WY-01. In the system, up to 6000mg/L phenol could be completely degraded by WY-01; meanwhile, 99.03±3.95% of ammonium was removed from the initial concentration of 384mg/L. This is the first study to show the capability of single strain in simultaneous removal of ammonium and phenol in wastewater containing such high concentrations of phenol. Moreover, the resin was regenerated during the biodegradation process without any additional manipulations, indicating the system was reusable. Furthermore, enzyme assay, gene expression patterns, HPLC-MS and gas chromatography analysis confirmed that phenol biodegradation accompanied with aerobic nitrifier denitrification process. Results imply that the reusable system provides a novel strategy for more efficient biodegradation of phenol and ammonium contained in some particular industrial wastewater. PMID:27060247

  2. 76 FR 64108 - Meeting of the Department of Justice's (DOJ's) National Motor Vehicle Title Information System...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-17

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Office of Justice Programs Meeting of the Department of Justice's (DOJ's) National Motor Vehicle Title Information System (NMVTIS) Federal Advisory Committee AGENCY: Office of Justice Programs (OJP),...

  3. 77 FR 10573 - Meeting of the Department of Justice's (DOJ's) National Motor Vehicle Title Information System...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-22

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Office of Justice Programs Meeting of the Department of Justice's (DOJ's) National Motor Vehicle Title Information System (NMVTIS) Federal Advisory Committee AGENCY: Office of Justice Programs (OJP),...

  4. 78 FR 51747 - Meeting of the Department of Justice's (DOJ's) National Motor Vehicle Title Information System...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-21

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Office of Justice Programs Meeting of the Department of Justice's (DOJ's) National Motor Vehicle Title Information System (NMVTIS) Federal Advisory Committee AGENCY: Office of Justice Programs (OJP),...

  5. 76 FR 38209 - Meeting of the Department of Justice's (DOJ's) National Motor Vehicle Title Information System...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-29

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Office of Justice Programs Meeting of the Department of Justice's (DOJ's) National Motor Vehicle Title Information System (NMVTIS) Federal Advisory Committee AGENCY: Bureau of Justice Assistance, Justice....

  6. 78 FR 43273 - Intelligent Transportation Systems Program Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-19

    ... TRANSPORTATION Research and Innovative Technology Administration Intelligent Transportation Systems Program Advisory Committee; Notice of Meeting AGENCY: ITS Joint Program Office, Research and Innovative Technology... of Transportation, Research and Innovative Technology Administration, ITS Joint Program...

  7. 75 FR 77955 - Intelligent Transportation Systems Program Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-14

    ... TRANSPORTATION Research and Innovative Technology Administration Intelligent Transportation Systems Program Advisory Committee; Notice of Meeting AGENCY: Research and Innovative Technology Administration, U.S... submitted by U.S. Mail to: U.S. Department of Transportation, Research and Innovative...

  8. 78 FR 11208 - Circulatory System Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-15

    ... HUMAN SERVICES Food and Drug Administration Circulatory System Devices Panel of the Medical Devices... (FDA). The meeting will be open to the public. Name of Committee: Circulatory System Devices Panel of... approval application for the MitraClip Delivery System sponsored by Abbott Vascular. The system consists...

  9. A chemical adsorption system for the sampling of gaseous organic pollutants in operating theatre atmospheres.

    PubMed

    Halliday, M M; Carter, K B

    1978-10-01

    The development of an air sampler and its use in measuring organic pollutants in operating theatre atmospheres are described. Air was sampled continuously during an operating session and the results obtained represent the average pollution at the sample site during that session. The technique involved the chemical adsorption of organic vapours to polymer beads and pollutants thus trapped could be stored for several days before thermal desorption and analysis by gas chromatography. The three most abundant organic pollutants were ethanol, propan-2-ol (isopropanol) and halothane.

  10. pH profile of the adsorption of nucleotides onto montmorillonite. II - Adsorption and desorption of 5-prime-AMP in iron-calcium montmorillonite systems

    NASA Technical Reports Server (NTRS)

    Banin, A.; Lawless, J. G.; Mazzurco, J.; Church, F. M.; Margulies, L.; Orenberg, J. B.

    1985-01-01

    The interaction of 5-prime-AMP with montmorillonite saturated with various ratios of two metals found ubiquitously on the surface of earth, that is, iron and calcium, is investigated. Adsorption and desorption of the nucleotide were studied in the pH range of 2-12 at three levels of addition: 0.080, 0.268 and 0.803 mmole 5-prime-AMP per gram of clay. Two desorption stages were employed - H2O wash and NaOH extraction (pH = 12.0). 5-prime-AMP was preferentially adsorbed on the Fe-containing clays relative to the Ca clay. The nucleotide was fully recovered by the two desorption stages, mostly by the NaOH extraction. The evidence at hand indicates that 5-prime-AMP reaction with clay is affected by electrostatic interactions involving both attraction and repulsion forces. Some specific adsorption, possibly the result of covalent bonding and complex formation with the adsorbed ion, cannot be ruled out for iron but does not appear to operate for calcium. Changes in pH cause varying degrees of attaction and repulsion of 5-prime-AMP and may have been operating on the primitive earth, leading to sequences of adsorption and release of this biomolecule.

  11. Expert Meeting Report: Recommendations for Applying Water Heaters in Combination Space and Domestic Water Heating Systems

    SciTech Connect

    Rudd, A.; Ueno, K.; Bergey, D.; Osser, R.

    2012-07-01

    The topic of this meeting was 'Recommendations For Applying Water Heaters In Combination Space And Domestic Water Heating Systems.' Presentations and discussions centered on the design, performance, and maintenance of these combination systems, with the goal of developing foundational information toward the development of a Building America Measure Guideline on this topic. The meeting was held at the Westford Regency Hotel, in Westford, Massachusetts on 7/31/2011.

  12. SYSGENET: a meeting report from a new European network for systems genetics.

    PubMed

    Schughart, Klaus

    2010-08-01

    The first scientific meeting of the newly established European SYSGENET network took place at the Helmholtz Centre for Infection Research (HZI) in Braunschweig, April 7-9, 2010. About 50 researchers working in the field of systems genetics using mouse genetic reference populations (GRP) participated in the meeting and exchanged their results, phenotyping approaches, and data analysis tools for studying systems genetics. In addition, the future of GRP resources and phenotyping in Europe was discussed.

  13. JANNAF 35th Combustion Subcommittee and 17th Propulsion Systems Hazards Subcommittee Meeting: Joint Sessions

    NASA Technical Reports Server (NTRS)

    Fry, Ronald S. (Editor); Gannaway, Mary T. (Editor); Rognan, Melanie (Editor)

    1998-01-01

    This publication is a compilation of 15 unclassified/unlimited technical papers presented at the 1998 meeting of the Joint Army-Navy-NASA-Air Force (JANNAF) Combustion Subcommittee (CS) and Propulsion Systems Hazards Subcommittee (PSHS) held jointly with the Airbreathing Propulsion Subcommittee (APS). The meeting was held on 7 - 11 December 1 998 at Raytheon Systems Company and the Marriott Hotel, Tucson, AZ. Topics covered include advanced ingredients and reaction kinetics in solid propellants and experimental diagnostic techniques.

  14. Application of an automation system and a supervisory control and data acquisition (SCADA) system for the optimal operation of a membrane adsorption hybrid system.

    PubMed

    Smith, P J; Vigneswaran, S; Ngo, H H; Nguyen, H T; Ben-Aim, R

    2006-01-01

    The application of automation and supervisory control and data acquisition (SCADA) systems to municipal water and wastewater treatment plants is rapidly increasing. However, the application of these systems is less frequent in the research and development phases of emerging treatment technologies used in these industries. This study involved the implementation of automation and a SCADA system to the submerged membrane adsorption hybrid system for use in a semi-pilot scale research project. An incremental approach was used in the development of the automation and SCADA systems, leading to the development of two new control systems. The first system developed involved closed loop control of the backwash initiation, based upon a pressure increase, leading to productivity improvements as the backwash is only activated when required, not at a fixed time. This system resulted in a 40% reduction in the number of backwashes required and also enabled optimised operations under unsteady concentrations of wastewater. The second system developed involved closed loop control of the backwash duration, whereby the backwash was terminated when the pressure reached a steady state. This system resulted in a reduction of the duration of the backwash of up to 25% and enabled optimised operations as the foulant build-up within the reactor increased. PMID:16722068

  15. Dissolution improvement of solid self-emulsifying drug delivery systems of fenofibrate using an inorganic high surface adsorption material.

    PubMed

    Shazly, Gamal; Mohsin, Kazi

    2015-03-01

    Solidification of lipid formulations using adsorbents is a recent technique attracting great interest due to its favourable properties including flexibility in dose division, reduction of intra-subject and inter-subject variability, improvement in efficacy/safety profile and enhancement of physical/ chemical stability. The current study aims to convert liquid self-emulsifying/nanoemulsifying drug delivery systems (SEDDS/SNEDDS) into solid SEDDS/SNEDDS and to assess how adsorption of the drug onto an inorganic high surface area material, NeusilinR grade US2 (NUS2), affects its in vitro dissolution performance. Lipid formulation classification systems (LFCS) Type III formulations were designed for the model anti-cholesterol drug fenofibrate. NUS2 was used to solidify the SEDDS/SNEDDS. Particle size and SEM analyses of solid SEDDS/SNEDDS powder were carried out to investigate the adsorption efficiency. In vitro dissolution studies were conducted to compare the developed formulations with the marketed product. The results of characterization studies showed that the use of 50% (m/m) adsorbent resulted in superior flowability and kept the drug stable is amorphous state. Dissolution studies allow the conclusion that the formulation containing a surfactant of higher water solubility (particularly, Type IIIB SNEDDS) has comparably faster and higher release profiles than Type IIIA (SEDDS) and marketed product. PMID:25781702

  16. Removal of bisphenol derivatives through quinone oxidation by polyphenol oxidase and subsequent quinone adsorption on chitosan in the heterogeneous system.

    PubMed

    Kimura, Yuji; Takahashi, Ayumi; Kashiwada, Ayumi; Yamada, Kazunori

    2015-01-01

    In this study, the combined use of a biopolymer chitosan and an oxidoreductase polyphenol oxidase (PPO) was systematically investigated for the removal of bisphenol derivatives from aqueous medium. The process parameters, such as the pH value, temperature, and PPO concentration, were estimated to conduct the enzymatic quinone oxidation of bisphenol derivatives by as little enzyme as possible. Bisphenol derivatives effectively underwent PPO-catalysed quinone oxidation without H2O2 unlike other oxidoreductases, such as peroxidase and tyrosinase, and the optimum conditions were determined to be pH 7.0 and 40°C for bisphenol B, bisphenol E, bisphenol O, and bisphenol Z; pH 7.0 and 30°C for bisphenol C and bisphenol F; and pH 8.0 and 40°C for bisphenol T. They were completely removed through adsorption of enzymatically generated quinone derivatives on chitosan beads or chitosan powders. Quinone adsorption on chitosan beads or chitosan powders in the heterogeneous system was found to be a more effective procedure than generation of aggregates in the homogeneous system with chitosan solution. The removal time was shortened by increasing the amount of chitosan beads or decreasing the size of the chitosan powders.

  17. Glycine on silica: a model system for the study of adsorption and reactivity of aminoacids on extraterrestrial particulate

    NASA Astrophysics Data System (ADS)

    Lambert, J. F.; Stievano, L.; Costa, D.; Meng, M.; Lomenech, C.

    It is well known that a wide variety of organic compounds have been detected in extraterrestrial environments. Among them, simple aminoacids were often found in meteorites, comets and extraterrestrial particulates. Such materials, which are supposed to be formed and evolved in interstellar space, have therefore become of interest as possible sources for the development of Earth's first biosphere. In order to understand how organic matter can develop in such systems, and, in particular, how oligopeptides can be formed on the surface of such solids starting from simpler molecules, we decided to undertake a study of the adsorption and reactivity of simple aminoacids on finely divided oxide surfaces. Here we report, both from the theoretical and experimental point of view, on the mechanisms of formation of polypeptides starting from glycine, the simplest aminoacid, on the surface of silicon oxide. Glycine was adsorbed on the surface of well-characterised silica both from aqueous solutions under controlled pH and concentration, and from the gas phase. The adsorbed molecules were characterised using middle IR and UV-vis-NIR spectroscopies. The different preparation conditions resulted in different adsorption mechanisms at specific adsorption sites and different states of the adsorbed glycine in agreement with the DFT simulation data. The thermal reactivity of adsorbed/deposited glycine was then investigated by thermogravimetric analysis, in-situ diffuse reflectance IR spectroscopy, and thermoprogrammed desorption coupled with mass spectrometry. Adsorbed glycine molecules react to form peptide bonds at a temperature considerably lower than bulk crystalline α -glycine, mainly producing the cyclic dimer diketopiperazine. These findings are of relevance for the evaluation of prebiotic peptide synthesis scenarii.

  18. [Effects of dissolved organic matter on napropamide adsorption and transport in soil system].

    PubMed

    Ma, Ai-jun; Zhou, Li-xiang; He, Ren-hong

    2006-02-01

    Dissolved organic matter (DOM) can affect the environmental behaviors of herbicides in soil. Batch adsorption and column experiments were conducted to measure the sorption and leaching of napropamide in soils in the presence of DOM derived from green manure (GM) and sewage sludge (SS). DOM reduced sorption of napropamide significantly onto the tested soils, consequently which facilitated the transport of napropamide exhibited by soil column experiment. The sorption inhibition and the increased mobility of napropamide caused by DOM of GM origin were more significant than that of SS origin for the same soil. Within the selected concentration range of the napropamide and DOM in this study napropamide sorption isotherm could be described well by the Freundlich equation. In comparison with the control, DOM of GM and SS origins could reduce napropamide adsorption by 22.9% and 11.3% in the yellow-brown soil and 9.5% and 6.5% in the calcareous soil, respectively. Correspondingly, in the presence of DOM the leaching losses of napropamide in soil column increased by 73.42% and 26.87% in the yellow-brown soil and 43.54% and 28.29% in the calcareous soil, respectively. PMID:16686205

  19. New Adsorption Methods.

    ERIC Educational Resources Information Center

    Wankat, Phillip C.

    1984-01-01

    Discusses a simple method for following the movement of a solute in an adsorption or ion exchange system. This movement is used to study a variety of operational methods, including continuous flow and pulsed flow counter-current operations and simulated counter-current systems. Effect of changing thermodynamic variables is also considered. (JM)

  20. 78 FR 38093 - Thirteenth Meeting: RTCA Special Committee 225, Rechargeable Lithium Battery and Battery Systems...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-25

    ... Battery and Battery Systems--Small and Medium Size AGENCY: Federal Aviation Administration (FAA), U.S... Lithium Battery and Battery Systems--Small and Medium Size. SUMMARY: The FAA is issuing this notice to... and Battery Systems--Small and Medium Size. DATES: The meeting will be held July 16-18, 2013, from...

  1. 77 FR 39321 - Eighth Meeting: RTCA Special Committee 225, Rechargeable Lithium Battery and Battery Systems...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-02

    ... and Battery Systems--Small and Medium Sizes AGENCY: Federal Aviation Administration (FAA), U.S... Lithium Battery and Battery Systems--Small and Medium Sizes. SUMMARY: The FAA is issuing this notice to... Battery Systems--Small and Medium Sizes. DATES: The meeting will be held July 17-19, 2012, from 9 a.m.-5...

  2. 78 FR 6845 - Eleventh Meeting: RTCA Special Committee 225, Rechargeable Lithium Battery and Battery Systems...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-31

    ... and Battery Systems--Small and Medium Size AGENCY: Federal Aviation Administration (FAA), U.S... Lithium Battery and Battery Systems--Small and Medium Size. SUMMARY: The FAA is issuing this notice to... and Battery Systems--Small and Medium Size. DATES: The meeting will be held February 7, 2013, from...

  3. 78 FR 16031 - Twelfth Meeting: RTCA Special Committee 225, Rechargeable Lithium Battery and Battery Systems...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-13

    ... and Battery Systems--Small and Medium Size AGENCY: Federal Aviation Administration (FAA), U.S... Lithium Battery and Battery Systems--Small and Medium Size. SUMMARY: The FAA is issuing this notice to... and Battery Systems--Small and Medium Size. DATES: The meeting will be held April 2-5, 2013, from...

  4. 77 FR 20688 - Seventh Meeting: RTCA Special Committee 225, Rechargeable Lithium Batteries and Battery Systems...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-05

    ... Batteries and Battery Systems, Small and Medium Size AGENCY: Federal Aviation Administration (FAA), U.S... Batteries and Battery Systems, Small and Medium Size. SUMMARY: The FAA is issuing this notice to advise the... Systems, Small and Medium Size. DATES: The meeting will be held May 1-3, 2012, from 9 a.m.-5...

  5. 77 FR 8325 - Sixth Meeting: RTCA Special Committee 225, Rechargeable Lithium Batteries and Battery Systems...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-14

    ... Batteries and Battery Systems, Small and Medium Size AGENCY: Federal Aviation Administration (FAA), U.S... Batteries and Battery Systems, Small and Medium Size. SUMMARY: The FAA is issuing this notice to advise the... Systems, Small and Medium Size. DATES: The meeting will be held February 28-29, 2012, from 9 a.m.-5...

  6. 78 FR 55773 - Fourteenth Meeting: RTCA Special Committee 225, Rechargeable Lithium Battery and Battery Systems...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-11

    ... Battery and Battery Systems--Small and Medium Size AGENCY: Federal Aviation Administration (FAA), U.S... Lithium Battery and Battery Systems--Small and Medium Size. SUMMARY: The FAA is issuing this notice to... Battery and Battery Systems--Small and Medium Size DATES: The meeting will be held October 1-3, 2013,...

  7. Are Statewide Data Systems Meeting the Local Institution's Needs? AIR Forum Paper 1978.

    ERIC Educational Resources Information Center

    Bryson, Charles H.

    Statewide data collection systems emerged in the late sixties as the vehicle to achieving greater efficiency and accountability in higher education. The expectations of statewide systems were that they would meet the needs of various levels of management. The example presented in this paper is the Georgia management information system and its…

  8. 77 FR 20872 - Intelligent Transportation Systems Program Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-06

    ... Intelligent Transportation Systems Program Advisory Committee; Notice of Meeting AGENCY: ITS Joint Program...: Notice. The Intelligent Transportation Systems (ITS) Program Advisory Committee (ITS PAC) will hold a... of intelligent transportation systems. Through its sponsor, the ITS Joint Program Office, the ITS...

  9. 33 CFR 96.230 - What objectives must a safety management system meet?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... MANAGEMENT SYSTEMS Company and Vessel Safety Management Systems § 96.230 What objectives must a safety... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false What objectives must a safety management system meet? 96.230 Section 96.230 Navigation and Navigable Waters COAST GUARD, DEPARTMENT...

  10. 76 FR 58019 - Circulatory System Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-19

    ... HUMAN SERVICES Food and Drug Administration Circulatory System Devices Panel of the Medical Devices... (FDA). The meeting will be open to the public. Name of Committee: Circulatory System Devices Panel of... sponsored by AtriCure, Inc., for the AtriCure Synergy Ablation System to be used for the treatment of...

  11. 75 FR 81282 - Circulatory System Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-27

    ... HUMAN SERVICES Food and Drug Administration Circulatory System Devices Panel of the Medical Devices... (FDA). The meeting will be open to the public. Name of Committee: Circulatory System Devices Panel of... PMA supplement for the RX Acculink Carotid Stent System, sponsored by Abbott Vascular. The RX...

  12. 77 FR 16038 - Circulatory System Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-19

    ... HUMAN SERVICES Food and Drug Administration Circulatory System Devices Panel of the Medical Devices... (FDA). The meeting will be open to the public. Name of Committee: Circulatory System Devices Panel of... the premarket approval application (PMA) for the HeartWare Ventricular Assist System (HVAS)...

  13. 76 FR 56200 - Circulatory System Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-12

    ... HUMAN SERVICES Food and Drug Administration Circulatory System Devices Panel of the Medical Devices... (FDA). The meeting will be open to the public. Name of Committee: Circulatory System Devices Panel of... and are pre-loaded onto 6 or 7 Fr \\1\\ (diameter of 2 or 2.3 mm) delivery systems. Upon deployment,...

  14. 75 FR 7282 - Circulatory System Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-18

    ... HUMAN SERVICES Food and Drug Administration Circulatory System Devices Panel of the Medical Devices... (FDA). The meeting will be open to the public. Name of Committee: Circulatory System Devices Panel of... recommendations and vote on a PMA for the REVO MRI Pacemaker System sponsored by Medtronic. The REVO MRI...

  15. 76 FR 63928 - Circulatory System Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-14

    ... HUMAN SERVICES Food and Drug Administration Circulatory System Devices Panel of the Medical Devices... (FDA). The meeting will be open to the public. Name of Committee: Circulatory System Devices Panel of...: ``Medtronic cardiac resynchronization therapy defibrillator (CRT-D) systems are indicated for heart...

  16. Modeling Pb (II) adsorption from aqueous solution by ostrich bone ash using adaptive neural-based fuzzy inference system.

    PubMed

    Amiri, Mohammad J; Abedi-Koupai, Jahangir; Eslamian, Sayed S; Mousavi, Sayed F; Hasheminejad, Hasti

    2013-01-01

    To evaluate the performance of Adaptive Neural-Based Fuzzy Inference System (ANFIS) model in estimating the efficiency of Pb (II) ions removal from aqueous solution by ostrich bone ash, a batch experiment was conducted. Five operational parameters including adsorbent dosage (C(s)), initial concentration of Pb (II) ions (C(o)), initial pH, temperature (T) and contact time (t) were taken as the input data and the adsorption efficiency (AE) of bone ash as the output. Based on the 31 different structures, 5 ANFIS models were tested against the measured adsorption efficiency to assess the accuracy of each model. The results showed that ANFIS5, which used all input parameters, was the most accurate (RMSE = 2.65 and R(2) = 0.95) and ANFIS1, which used only the contact time input, was the worst (RMSE = 14.56 and R(2) = 0.46). In ranking the models, ANFIS4, ANFIS3 and ANFIS2 ranked second, third and fourth, respectively. The sensitivity analysis revealed that the estimated AE is more sensitive to the contact time, followed by pH, initial concentration of Pb (II) ions, adsorbent dosage, and temperature. The results showed that all ANFIS models overestimated the AE. In general, this study confirmed the capabilities of ANFIS model as an effective tool for estimation of AE. PMID:23383640

  17. Interaction of cement model systems with superplasticizers investigated by atomic force microscopy, zeta potential, and adsorption measurements.

    PubMed

    Ferrari, Lucia; Kaufmann, Josef; Winnefeld, Frank; Plank, Johann

    2010-07-01

    Polyelectrolyte-based dispersants are commonly used in a wide range of industrial applications to provide specific workability to colloidal suspensions. Their working mechanism is based on adsorption onto the surfaces of the suspended particles. The adsorbed polymer layer can exercise an electrostatic and/or a steric effect which is responsible for achieving dispersion. This study is focused on the dispersion forces induced by polycarboxylate ether-based superplasticizers (PCEs) commonly used in concrete. They are investigated by atomic force microscopy (AFM) applying standard silicon nitride tips exposed to solutions with different ionic compositions in a wet cell. Adsorption isotherms and zeta potential analysis were performed to characterize polymer displacement in the AFM system on nonreactive model substrates (quartz, mica, calcite, and magnesium oxide) in order to avoid the complexity of cement hydration products. The results show that PCE is strongly adsorbed by positively charged materials. This fact reveals that, being silicon nitride naturally positively charged, in most cases the superplasticizer adsorbs preferably on the silicon nitride tip than on the AFM substrate. However, the force-distance curves displayed repulsive interactions between tip and substrates even when polymer was poorly adsorbed on both. These observations allow us to conclude that the dispersion due to PCE strongly depends on the particle charge. It differs between colloids adsorbing and not adsorbing PCE, and leads to different forces acting between the particles.

  18. 75 FR 44306 - Eleventh Meeting: Joint RTCA Special Committee 213: EUROCAE WG-79: Enhanced Flight Vision Systems...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-28

    ... Federal Aviation Administration Eleventh Meeting: Joint RTCA Special Committee 213: EUROCAE WG- 79... September 21-23, 2010 from 8:30 a.m.--5 p.m. (0830-1700). ADDRESSES: The meeting will be held at the London... Systems/Synthetic Vision Systems (EFVS/SVS) meeting. The agenda will include: Tuesday, 21...

  19. The influence of adsorption coating on molecular heat transfer in the system `rarefied gas — metal'

    NASA Astrophysics Data System (ADS)

    Ukhov, A. I.; Borisov, S. F.; Porodnov, B. T.

    2010-03-01

    Based on the classical concept of atomic motion and the Goodman and Wachman lattice theory, we have developed a computer program to model the equilibrium and non-equilibrium scattering of helium atoms by 3D tungsten crystal lattice with allowance for adsorption surface coating. Within the concept of energy accommodation coefficient, we have calculated the rate of molecular heat transfer of helium to clean tungsten surface or to tungsten surface partially covered with an adsorbate. The calculations were performed for various surface temperatures. The calculated dependences were compared to test data obtained in experiments with surfaces controlled in terms of their chemical composition. Within the developed approach, the simulations proved capable of providing an adequate description to experimental data obtained for the equilibrium energy accommodation coefficient on the clean surface, and also for the non-equilibrium energy accommodation coefficient for the surface partially covered with adsorbate.

  20. ORC-GAC-Fe0 system for the remediation of trichloroethylene and monochlorobenzene contaminated aquifer: 1. Adsorption and degradation.

    PubMed

    Lin, Qi; Chen, Ying-xu; Plagentz, V; Schäfer, D; Dahmke, A

    2004-01-01

    Activities at a former Chemistry Triangle in Bitterfeld, Germany, resulted in contamination of groundwater with a mixture of trichloroethylene(TCE) and monochlorobenzene(MCB). The objective of this study was to develop a barrier system, which includes an ORC(oxygen release compounds) and GAC(granular activated carbon) layer for adsorption of MCB and bioregeneration of GAC, a Fe0 layer for chemical reductive dechlorination of TCE and other chlorinated hydrocarbon in situ. A laboratory-scale column experiment was conducted to evaluate the feasibility of this proposed system. This experiment was performed using a series of continuous flow Teflon columns including an ORC column, a GAC column, and a Fe0 column. Simulated MCB and TCE contaminated groundwater was pumped upflow into this system at a flow rate of 1.1 ml/min. Results showed that 17%-50% of TCE and 28%-50% of MCB were dissipated in ORC column. Chloride ion, however, was not released, which suggest the dechlorination do not happen in ORC column. In GAC column, the adsorption of contaminants on activated carbon and their induced degradation by adapted microorganisms attached to the carbon surface were observed. Due to competitive exchange processes, TCE can be desorbed by MCB in GAC column and further degraded in iron column. The completely dechlorination rate of TCE was 0.16-0.18 cm(-1), 1-4 magnitudes more than the formation rate of three dichloroethene isomers. Cis-DCE is the main chlorinated product, which can be cumulated in the system, not only depending on the formation rate and its decaying rate, but also the initial concentration of TCE.

  1. A Formative Program Evaluation of Electronic Clinical Tracking System Documentation to Meet National Core Competencies.

    PubMed

    Smith, Lynette S; Branstetter, M Laurie

    2016-09-01

    Electronic clinical tracking systems are used in many educational institutions of higher learning to document advanced practice registered nursing students' clinical experiences. Students' clinical experiences are constructed according to the National Organization of Nurse Practitioner Faculties core competencies. These competencies form a basis for evaluation of advanced practice registered nursing programs. However, no previous studies have evaluated the use of electronic clinical tracking systems to validate students' clinical experiences in meeting national core competencies. Medatrax, an electronic clinical tracking system, is evaluated using a formative program evaluation approach to determine if students' clinical documentations meet Family/Across the Lifespan Nurse Practitioner Competencies in a midsouthern family nurse practitioner program. This formative program evaluation supports the use of an electronic clinical tracking system in facilitating accreditation and program outcome goals. The significance of this study is that it provides novel evidence to support the use of an electronic clinical tracking system to assist a midsouthern school of nursing in meeting national core competencies.

  2. Nondestructive laser system for the in-situ study of the kinetics of the adsorption processes at solid/liquid interface

    NASA Astrophysics Data System (ADS)

    Todoran, Radu; Sharkany, Josif P.

    1999-05-01

    This paper presents a laser-optical fiber system which allows us to estimate continuously and 'in situ' the evolution of the adsorption layer at the interface solid-liquid. Locally, the kinetics of the evolution of the adsorption layer at the interface between a mineral and a xanthate organic solution, is investigated. In this case, the knowledge for the kinetics of the adsorption process is extremely important for explaining the intimate mechanisms of the flotation industrial processes. The monitoring system for the kinetics of the adsorption of xanthate organic molecules on the mineral support is based, during its run, on the variation in the relative reflectance of the interface due to the adsorption layer evolution. The method, designed to study the evolution kinetics of the adsorption layer at the interface between a xanthate solution and a sulphuric mineral, is based on the proportionally link between the evolution of the adsorption layer and the relative variation of its refraction index. The experimental appliance used a coherent and monochromatic unpolarized laser radiation, with its wavelength (lambda) equals 0.89 micrometer, which corresponds to the near IR range. This wavelength has been chosen both for physical performed using an Al mirror as standard for maximum (100%) reflectance, and by immersing it into different xanthate solutions having successively the following concentrations: 25 mg/l; 50 mg/l; 100 mg/l and 3 g/l, respectively. This procedure allowed to observe that the reflection given by the mirror, in these cases, has a relatively narrow spectral range in UV, for which it has values greater for 4 - 6%. The following ones have been used: isobutyl xanthate, amyl xanthate and ethyl xanthate. The reflection spectrum on the mirror (if neglecting the attenuation in liquid and the transmission spectrum) was measured by means of a spectrophotometer SPECORD M40 (made in Germany), and the determinations were performed in the range from 200 to 950 nm.

  3. Meeting the challenges of installing a mobile robotic system

    NASA Technical Reports Server (NTRS)

    Decorte, Celeste

    1994-01-01

    The challenges of integrating a mobile robotic system into an application environment are many. Most problems inherent to installing the mobile robotic system fall into one of three categories: (1) the physical environment - location(s) where, and conditions under which, the mobile robotic system will work; (2) the technological environment - external equipment with which the mobile robotic system will interact; and (3) the human environment - personnel who will operate and interact with the mobile robotic system. The successful integration of a mobile robotic system into these three types of application environment requires more than a good pair of pliers. The tools for this job include: careful planning, accurate measurement data (as-built drawings), complete technical data of systems to be interfaced, sufficient time and attention of key personnel for training on how to operate and program the robot, on-site access during installation, and a thorough understanding and appreciation - by all concerned - of the mobile robotic system's role in the security mission at the site, as well as the machine's capabilities and limitations. Patience, luck, and a sense of humor are also useful tools to keep handy during a mobile robotic system installation. This paper will discuss some specific examples of problems in each of three categories, and explore approaches to solving these problems. The discussion will draw from the author's experience with on-site installations of mobile robotic systems in various applications. Most of the information discussed in this paper has come directly from knowledge learned during installations of Cybermotion's SR2 security robots. A large part of the discussion will apply to any vehicle with a drive system, collision avoidance, and navigation sensors, which is, of course, what makes a vehicle autonomous. And it is with these sensors and a drive system that the installer must become familiar in order to foresee potential trouble areas in the

  4. Fractional Statistical Theory of Adsorption of Polyatomics

    NASA Astrophysics Data System (ADS)

    Riccardo, J. L.; Ramirez-Pastor, A. J.; Romá, F.

    2004-10-01

    A new theoretical description of fractional statistical theory of adsorption (FSTA) phenomena is presented based on Haldane’s statistics. Thermodynamic functions for adsorption of polyatomics are analytically developed. The entropy is characterized by an exclusion parameter g, which relates to the configuration of the admolecules and surface geometry. FSTA provides a simple framework to address a large class of complex adsorption systems. Comparisons of theoretical adsorption isotherms with experiments and simulations indicate that adsorption configuration and adsorption energy can accurately be assessed from this theory.

  5. Fractional statistical theory of adsorption of polyatomics.

    PubMed

    Riccardo, J L; Ramirez-Pastor, A J; Romá, F

    2004-10-29

    A new theoretical description of fractional statistical theory of adsorption (FSTA) phenomena is presented based on Haldane's statistics. Thermodynamic functions for adsorption of polyatomics are analytically developed. The entropy is characterized by an exclusion parameter g, which relates to the configuration of the admolecules and surface geometry. FSTA provides a simple framework to address a large class of complex adsorption systems. Comparisons of theoretical adsorption isotherms with experiments and simulations indicate that adsorption configuration and adsorption energy can accurately be assessed from this theory. PMID:15525184

  6. Design method for adsorption beds

    NASA Technical Reports Server (NTRS)

    Blakely, R. L.; Jackson, J. K.

    1970-01-01

    Regenerable adsorption beds for long-term life support systems include synthetic geolite to remove carbon dioxide and silica gel to dehumidify the atmospheric gas prior to its passage through the geolite beds. Bed performance is evaluated from adsorption characteristics, heat and mass transfer, and pressure drop.

  7. System-dependent dispersion coefficients for the DFT-D3 treatment of adsorption processes on ionic surfaces.

    PubMed

    Ehrlich, Stephan; Moellmann, Jonas; Reckien, Werner; Bredow, Thomas; Grimme, Stefan

    2011-12-01

    Dispersion-corrected density functional theory calculations (DFT-D3) were performed for the adsorption of CO on MgO and C(2) H(2) on NaCl surfaces. An extension of our non-empirical scheme for the computation of atom-in-molecules dispersion coefficients is proposed. It is based on electrostatically embedded M(4)X(4) (M=Na, Mg) clusters that are used in TDDFT calculations of dynamic dipole polarizabilities. We find that the C(MM)(6) dispersion coefficients for bulk NaCl and MgO are reduced by factors of about 100 and 35 for Na and Mg, respectively, compared to the values of the free atoms. These are used in periodic DFT calculations with the revPBE semi-local density functional. As demonstrated by calculations of adsorption potential energy curves, the new C(6) coefficients lead to much more accurate energies (E(ads)) and molecule-surface distances than with previous DFT-D schemes. For NaCl/C(2) H(2) we obtained at the revPBE-D3(BJ) level a value of E(ads) =-7.4 kcal mol(-1) in good agreement with experimental data (-5.7 to -7.1 kcal mol(-1)). Dispersion-uncorrected DFT yields an unbound surface state. For the MgO/CO system, the computed revPBE-D3(BJ) value of E(ads) =-4.1 kcal mol(-1) is also in reasonable agreement with experimental results (-3.0 kcal mol(-1)) when thermal corrections are taken into account. Our new dispersion correction also improves computed lattice constants of the bulk systems significantly compared to plain DFT or previous DFT-D results. The extended DFT-D3 scheme also provides accurate non-covalent interactions for ionic systems without empirical adjustments and is suggested as a general tool in surface science.

  8. Development of advanced turbine systems: Meeting tomorrow's needs

    NASA Astrophysics Data System (ADS)

    Webb, H. A.; Bajura, R. A.

    The National Energy Strategy calls for increased efficiency in all sectors of energy use. It also projects a significant increase in natural gas consumption by the year 2000, due in part to increased use of natural gas for electric power generation. Consistent with the NES, a Department of Energy program is being formulated to develop Advanced Turbine Systems (ATS) which will be: ultra-high efficiency, environmentally superior, and cost competitive. The ATS program is to be a comprehensive effort involving DOE Fossil Energy, DOE Conservation and Renewable Energy, turbine manufacturers, the Gas Research Institute, the Electric Power Research Institute and others. A ten-year plan is being formulated to develop natural-gas-fired baseload power systems for commercial offering by 2002. Systems will be developed to serve both central power (utility and independent power producer) and industrial applications. The central power systems will be suitable for future adaptation to coal firing.

  9. Controlled Ecological Life Support System. First Principal Investigators Meeting

    SciTech Connect

    Moore, B., III; Wharton, R.A. Jr.; Macelroy, R.D.

    1982-12-01

    Control problems in autonomous life support systems, CELSS candidate species, maximum grain yield, plant growth, waste management, air pollution, and mineral separation are discussed. For individual titles, see N83-30017 through N83-30033.

  10. Choosing an information system to meet specific needs.

    PubMed

    Burton, J A

    1983-07-01

    Because of the increasing number of information systems on the market today, the user must select the system wisely according to the vendor's ability to solve specific company needs. An organization must know its filing and retrieval requirements, its potential for growth, etc., and must then contact only those vendors that fit specific company requirements. The vendor's reputation in the field, service history, "after-sales support," and ability to supply cost analyses should all be examined. PMID:10263971

  11. 76 FR 54527 - Fourth Meeting: RTCA Special Committee 225: Rechargeable Lithium Batteries and Battery Systems...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-01

    ... and Battery Systems--Small and Medium Sizes AGENCY: Federal Aviation Administration (FAA), DOT. ACTION... and Medium Sizes. SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 225: Rechargeable Lithium Batteries and Battery Systems--Small and Medium Sizes....

  12. 76 FR 22161 - Second Meeting: RTCA Special Committee 225: Rechargeable Lithium Batteries and Battery Systems...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-20

    ... and Battery Systems--Small and Medium Sizes AGENCY: Federal Aviation Administration (FAA), DOT. ACTION... and Medium Sizes. SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 225: Rechargeable Lithium Batteries and Battery Systems--Small and Medium Sizes....

  13. 76 FR 6180 - First Meeting: RTCA Special Committee 225: Rechargeable Lithium Batteries and Battery Systems...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-03

    ... and Battery Systems--Small and Medium Sizes AGENCY: Federal Aviation Administration (FAA), DOT. ACTION... and Medium Sizes. SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 225: Rechargeable Lithium Batteries and Battery Systems--Small and Medium Sizes....

  14. 76 FR 38741 - Third Meeting: RTCA Special Committee 225: Rechargeable Lithium Batteries and Battery Systems...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-01

    ... and Battery Systems--Small and Medium Sizes AGENCY: Federal Aviation Administration (FAA), DOT. ACTION... and Medium Sizes. SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 225: Rechargeable Lithium Batteries and Battery Systems--Small and Medium Sizes....

  15. 77 FR 51845 - Intelligent Transportation Systems Program Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-27

    ...: Notice. The Intelligent Transportation Systems (ITS) Program Advisory Committee (ITS PAC) will hold a meeting by teleconference on September 11, 2012, from 1 p.m. to 2:30 p.m. (EDT). The ITS PAC, established... of intelligent transportation systems. Through its sponsor, the ITS Joint Program Office, the ITS...

  16. 78 FR 63478 - Peripheral and Central Nervous System Drugs Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-24

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration Peripheral and Central Nervous System Drugs Advisory...). The meeting will be open to the public. Name of Committee: Peripheral and Central Nervous System...

  17. 77 FR 20037 - Peripheral and Central Nervous System Drugs Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-03

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration Peripheral and Central Nervous System Drugs Advisory...). The meeting will be open to the public. Name of Committee: Peripheral and Central Nervous System...

  18. 75 FR 36428 - Peripheral and Central Nervous System Drugs Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-25

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration Peripheral and Central Nervous System Drugs Advisory...). The meeting will be open to the public. Name of Committee: Peripheral and Central Nervous System...

  19. 76 FR 3912 - Peripheral and Central Nervous System Drugs Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-21

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration Peripheral and Central Nervous System Drugs Advisory...). The meeting will be open to the public. Name of Committee: Peripheral and Central Nervous System...

  20. 75 FR 12768 - Peripheral and Central Nervous System Drugs Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-17

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration Peripheral and Central Nervous System Drugs Advisory...). The meeting will be open to the public. Name of Committee: Peripheral and Central Nervous System...

  1. 78 FR 20328 - Peripheral and Central Nervous System Drugs Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-04

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration Peripheral and Central Nervous System Drugs Advisory...). The meeting will be open to the public. Name of Committee: Peripheral and Central Nervous System...

  2. 78 FR 63481 - Peripheral and Central Nervous System Drugs Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-24

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration Peripheral and Central Nervous System Drugs Advisory...). The meeting will be open to the public. Name of Committee: Peripheral and Central Nervous System...

  3. 75 FR 17417 - Peripheral and Central Nervous System Drugs Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-06

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration Peripheral and Central Nervous System Drugs Advisory...). The meeting will be open to the public. Name of Committee: Peripheral and Central Nervous System...

  4. 76 FR 34099 - Meeting of the National Park System Advisory Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-10

    ... National Park Service Meeting of the National Park System Advisory Board AGENCY: National Park Service... Federal Advisory Committee Act, 5 U.S.C. Appendix, that the National Park System Advisory Board will... the National Park Service concerning the National Park Service's 2016 centennial anniversary....

  5. 77 FR 18829 - Circulatory System Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-28

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration Circulatory System Devices Panel of the Medical Devices... (FDA). The meeting will be open to the public. Name of Committee: Circulatory System Devices Panel...

  6. 78 FR 67365 - Circulatory System Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-12

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration Circulatory System Devices Panel of the Medical Devices... (FDA). The meeting will be open to the public. Name of Committee: Circulatory System Devices Panel...

  7. Designing Biological Systems for Sustainability and Programmed Environmental Interface (2011 JGI User Meeting)

    ScienceCinema

    Silver, Pam [Harvard University

    2016-07-12

    The U.S. Department of Energy Joint Genome Institute (JGI) invited scientists interested in the application of genomics to bioenergy and environmental issues, as well as all current and prospective users and collaborators, to attend the annual DOE JGI Genomics of Energy & Environment Meeting held March 22-24, 2011 in Walnut Creek, Calif. The emphasis of this meeting was on the genomics of renewable energy strategies, carbon cycling, environmental gene discovery, and engineering of fuel-producing organisms. The meeting features presentations by leading scientists advancing these topics. Pam Silver of Harvard University gives a presentation on "Designing Biological Systems for Sustainability and Programmed Environmental Interface" at the 6th annual Genomics of Energy & Environment Meeting on March 23, 2011

  8. Large Scale CW ECRH Systems: Meeting a Challenge

    SciTech Connect

    Erckmann, V.; Braune, H.; Laqua, H. P.; Marushchenko, N. B.; Michel, G.; Kasparek, W.; Plaum, B.; Lechte, C.; Stuttgart, IPF; Petelin, M. I.; Lubiako, L.; Bruschi, A.; D'Arcangelo, O.; Bin, W.; Van Den Braber, R.; Doelman, N.; Gantenbein, G.; Thumm, M.

    2011-12-23

    Electron Cyclotron Resonance Heating (ECRH) systems for next step-fusion devices like W7-X and ITER operate in CW-mode and provide a large flexibility to comply with various physics demands such as plasma start-up, heating and current drive, as well as configuration and MHD control. The request for many different sophisticated applications results in a growing complexity of the systems. This is in conflict with the request for high availability, reliability, and maintainability, which arises from DEMO demands. 'Advanced' ECRH-components must, therefore, comply with both the complex physics demands and operational robustness and reliability. The W7-X ECRH system is the first CW facility of an ITER relevant size and is used as a test bed for such components. Results on improvements of gyrotrons, transmission components and launchers are presented together with proposals for future developments.

  9. Assume-Guarantee Abstraction Refinement Meets Hybrid Systems

    NASA Technical Reports Server (NTRS)

    Bogomolov, Sergiy; Frehse, Goran; Greitschus, Marius; Grosu, Radu; Pasareanu, Corina S.; Podelski, Andreas; Strump, Thomas

    2014-01-01

    Compositional verification techniques in the assume- guarantee style have been successfully applied to transition systems to efficiently reduce the search space by leveraging the compositional nature of the systems under consideration. We adapt these techniques to the domain of hybrid systems with affine dynamics. To build assumptions we introduce an abstraction based on location merging. We integrate the assume-guarantee style analysis with automatic abstraction refinement. We have implemented our approach in the symbolic hybrid model checker SpaceEx. The evaluation shows its practical potential. To the best of our knowledge, this is the first work combining assume-guarantee reasoning with automatic abstraction-refinement in the context of hybrid automata.

  10. A Field-Test of Solar Assisted Adsorptive Desiccant Cooling System

    NASA Astrophysics Data System (ADS)

    Ohkura, Masashi; Kodama, Akio; Hirose, Tsutomu

    A field-test of solar assisted desiccant evaporative cooling process has been carried out, which is a quite attractive cooling / dehumidification process considering various environmental problems caused by conventional electricity driven air conditioners. The process performance has been examined by means of temperature drop between outside air and supply air and COPs (COP value based on solar irradiation). This cooling performance was strongly influenced by solar irradiation and ambient air condition. Stable irradiation produced a higher regeneration temperature resulting higher dehumidifying performance. At one day with as table solar irradiation, the cooling process could produce cool supply air of 18.7°C against the ambient air of 30.1°C and averaged COP, was 0.41. On the other hand, unstable irradiation due to some clouds made the dehumidifying performance lower. However, decrease in the cooling performance was small compared to that obtained at the stable irradiation condition. This is due to buffering by thermal storage of the water circulating in solar collectors. Influence of ambient humidity on the cooling performance was rather serious. At higher humidity condition, the amount of dehumidified water became larger due to increase of effective adsorption capacity of the desiccant rotor. However, the temperature drop was decreased to 6.9°C. This behavior was mainly due to simultaneous increase of humidity and temperature in the dehumidified air. In this situation, an effective evaporation in the following water spray evaporative cooler did not occur.

  11. Applied Information Systems Research Program (AISRP) Workshop 3 meeting proceedings

    NASA Technical Reports Server (NTRS)

    1993-01-01

    The third Workshop of the Applied Laboratory Systems Research Program (AISRP) met at the Univeristy of Colorado's Laboratory for Atmospheric and Space Physics in August of 1993. The presentations were organized into four sessions: Artificial Intelligence Techniques; Scientific Visualization; Data Management and Archiving; and Research and Technology.

  12. Proceedings of the IMOG (Interagency Manufacturing Operations Group) Numerical Systems Group. 62nd Meeting

    SciTech Connect

    Maes, G.J.

    1993-10-01

    This document contains the proceedings of the 62nd Interagency Manufacturing Operations Group (IMOG) Numerical Systems Group. Included are the minutes of the 61st meeting and the agenda for the 62nd meeting. Presentations at the meeting are provided in the appendices to this document. Presentations were: 1992 NSG Annual Report to IMOG Steering Committee; Charter for the IMOG Numerical Systems Group; Y-12 Coordinate Measuring Machine Training Project; IBH NC Controller; Automatically Programmed Metrology Update; Certification of Anvil-5000 for Production Use at the Y-12 Plant; Accord Project; Sandia National Laboratories {open_quotes}Accord{close_quotes}; Demo/Anvil Tool Path Generation 5-Axis; Demo/Video Machine/Robot Animation Dynamics; Demo/Certification of Anvil Tool Path Generation; Tour of the M-60 Inspection Machine; Distributed Numerical Control Certification; Spline Usage Method; Y-12 NC Engineering Status; and Y-12 Manufacturing CAD Systems.

  13. Artificial neural network (ANN) modeling of adsorption of methylene blue by NaOH-modified rice husk in a fixed-bed column system.

    PubMed

    Chowdhury, Shamik; Saha, Papita Das

    2013-02-01

    In this study, rice husk was modified with NaOH and used as adsorbent for dynamic adsorption of methylene blue (MB) from aqueous solutions. Continuous removal of MB from aqueous solutions was studied in a laboratory scale fixed-bed column packed with NaOH-modified rice husk (NMRH). Effect of different flow rates and bed heights on the column breakthrough performance was investigated. In order to determine the most suitable model for describing the adsorption kinetics of MB in the fixed-bed column system, the bed depth service time (BDST) model as well as the Thomas model was fitted to the experimental data. An artificial neural network (ANN)-based model was also developed for describing the dynamic dye adsorption process. An extensive error analysis was carried out between experimental data and data predicted by the models by using the following error functions: correlation coefficient (R(2)), average relative error, sum of the absolute error and Chi-square statistic test (χ(2)). Results show that with increasing bed height and decreasing flow rate, the breakthrough time was delayed. All the error functions yielded minimum values for the ANN model than the traditional models (BDST and Thomas), suggesting that the ANN model is the most suitable model to describe the fixed-bed adsorption of MB by NMRH. It is also more rational and reliable to interpret dynamic dye adsorption data through a process of ANN architecture.

  14. Numerical study of an internal-reforming solid oxide fuel cell and adsorption chiller co-generation system

    NASA Astrophysics Data System (ADS)

    Liu, Y.; Leong, K. C.

    A study is conducted on a cogeneration system that incorporates a natural gas fed internal-reforming solid oxide fuel cell (IRSOFC) and a zeolite/water adsorption chiller (AC). The main aim is to investigate the performance of this combined system under different operating conditions and design parameters. A mathematical model is developed to simulate the combined system under steady-state conditions. The effects of fuel flow rate, fuel utilization factor, circulation ratio, mass of adsorbent and inlet air temperature on the performance are considered. The results show that the proposed IRSOFC-AC cogeneration system can achieve a total efficiency (combined electrical power and cooling power) of more than 77%. The electrical efficiency is found to decrease as the fuel flow rate increases, while the cooling power increases to a constant value. The total efficiency reaches a maximum value with variation of the fuel utilization factor. Both the circulation ratio and the inlet air temperature exert positive impacts on system efficiency.

  15. 78 FR 9731 - Notice of February 28, 2013, Teleconference Meeting of the National Park System Advisory Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-11

    ... Board members. The Board meeting will be open to the public in the same way that other Board meetings have been open to the public. Space and facilities to accommodate the public are limited and attendees... System Advisory Board will conduct a teleconference meeting on February 28, 2013. Members of the...

  16. Cd adsorption onto bacterial surfaces: A universal adsorption edge?

    NASA Astrophysics Data System (ADS)

    Yee, Nathan; Fein, Jeremy

    2001-07-01

    In this study, we measure the thermodynamic stability constants for proton and Cd binding onto the Gram-negative bacteria Escherichia coli and Pseudomonas aeruginosa, and the Gram-positive bacteria Bacillus megaturium, Streptococcus faecalis, Staphylococcus aureus, Sporosarcina ureae, and Bacillus cereus. Potentiometric titrations and Cd-bacteria adsorption experiments yield average values for the carboxyl site pK a, site concentration, and log stability constant for the bacterial surface Cd-carboxyl complex of 5.0, 2.0 × 10 -3 mol/g and 4.0 respectively. Our results indicate that a wide range of bacterial species exhibit nearly identical Cd adsorption behavior as a function of pH. We propose that metal-bacteria adsorption is not dependent on the bacterial species involved, and we develop a generalized adsorption model which may greatly simplify the task of quantifying the effects of bacterial adsorption on dissolved mass transport in realistic geologic systems.

  17. Applied Information Systems Research Program (AISRP). Workshop 2: Meeting Proceedings

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The Earth and space science participants were able to see where the current research can be applied in their disciplines and computer science participants could see potential areas for future application of computer and information systems research. The Earth and Space Science research proposals for the High Performance Computing and Communications (HPCC) program were under evaluation. Therefore, this effort was not discussed at the AISRP Workshop. OSSA's other high priority area in computer science is scientific visualization, with the entire second day of the workshop devoted to it.

  18. Co-Adsorption of Ammonia and Formaldehyde on Regenerable Carbon Sorbents for the Primary Life Support System (PLSS)

    NASA Technical Reports Server (NTRS)

    Wojtowicz, Marek A.; Cosgrove, Joseph E.; Serio, Michael A.; Wilburn, Monique S.

    2016-01-01

    Results are presented on the development of a reversible carbon sorbent for trace-contaminant (TC) removal for use in Extravehicular Activities (EVAs), and more specifically in the Primary Life Support System (PLSS). The current TC-control technology involves the use of a packed bed of acid-impregnated granular charcoal, which is deemed non-regenerable, while the carbon-based sorbent under development in this project can be regenerated by exposure to vacuum at room temperature. Data on concurrent sorption and desorption of ammonia and formaldehyde, which are major TCs of concern, are presented in this paper. A carbon sorbent was fabricated by dry impregnation of a reticulated carbon-foam support with polyvinylidene chloride, followed by carbonization and thermal oxidation in air. Sorbent performance was tested for ammonia and formaldehyde sorption and vacuum regeneration, with and without water present in the gas stream. It was found that humidity in the gas phase enhanced ammonia-sorption capacity by a factor larger than two. Co-adsorption of ammonia and formaldehyde in the presence of water resulted in strong formaldehyde sorption (to the point that it was difficult to saturate the sorbent on the time scales used in this study). In the absence of humidity, adsorption of formaldehyde on the carbon surface was found to impair ammonia sorption in subsequent runs; in the presence of water, however, both ammonia and formaldehyde could be efficiently removed from the gas phase by the sorbent. The efficiency of vacuum regeneration could be enhanced by gentle heating to temperatures below 60 deg.

  19. Geoinformatics meets education for a peat bog information system

    NASA Astrophysics Data System (ADS)

    Michel, Ulrich; Fiene, Christina; Plass, Christian

    2010-10-01

    Within the project "Expedition Bog: Young researchers are experimenting, exploring and discovering" a bog-information- system is developed by the Department of Geography (University of Education Heidelberg, Germany), the Institute for Geoinformatics and Remote Sensing (University of Osnabrueck, Germany; the NABU Umweltpyramide gGmbH. This information system will be available for schools and to the public. It is supplemented by teaching units on various topics around the bog via an online platform. The focus of the project, however, is the original encounter with the bog habitat. This is realized by a GPS scavenger hunt with small research tasks and observations, mapping and experiments. The project areas are the Huvenhoops bog and the Lauenbruecker bog in Rotenburg in Lower Saxony, Germany. Equipped with a researcher backpack, GPS device and a mobile bog book by means of a pocket PC, students can discover different learning stations in the project bogs. In our areas the students can learn more about different topics such as "the historical memory of the bog", "water", "peat moss and other plants" and "animals of the bog". Moreover small inquiry research projects can be executed. Experimenting on site helps students to develop important scientific findings and increases their curiosity and enthusiasm for nature. It also promotes a number of other basic skills such as literacy, language skills, social skills or fine motor skills. Moreover it also fosters the development of a positive attitude to science in general. The main objective of the project is to promote sustainable environmental education, as well as the development of environmental awareness. This will be accomplished through the imparting of knowledge but also through experiencing nature with all senses in the context of original encounters.

  20. TRIENNIAL LACTATION SYMPOSIUM: Nutrigenomics in livestock: Systems biology meets nutrition.

    PubMed

    Loor, J J; Vailati-Riboni, M; McCann, J C; Zhou, Z; Bionaz, M

    2015-12-01

    The advent of high-throughput technologies to study an animal's genome, proteome, and metabolome (i.e., "omics" tools) constituted a setback to the use of reductionism in livestock research. More recent development of "next-generation sequencing" tools was instrumental in allowing in-depth studies of the microbiome in the rumen and other sections of the gastrointestinal tract. Omics, along with bioinformatics, constitutes the foundation of modern systems biology, a field of study widely used in model organisms (e.g., rodents, yeast, humans) to enhance understanding of the complex biological interactions occurring within cells and tissues at the gene, protein, and metabolite level. Application of systems biology concepts is ideal for the study of interactions between nutrition and physiological state with tissue and cell metabolism and function during key life stages of livestock species, including the transition from pregnancy to lactation, in utero development, or postnatal growth. Modern bioinformatic tools capable of discerning functional outcomes and biologically meaningful networks complement the ever-increasing ability to generate large molecular, microbial, and metabolite data sets. Simultaneous visualization of the complex intertissue adaptations to physiological state and nutrition can now be discerned. Studies to understand the linkages between the microbiome and the absorptive epithelium using the integrative approach are emerging. We present examples of new knowledge generated through the application of functional analyses of transcriptomic, proteomic, and metabolomic data sets encompassing nutritional management of dairy cows, pigs, and poultry. Published work to date underscores that the integrative approach across and within tissues may prove useful for fine-tuning nutritional management of livestock. An important goal during this process is to uncover key molecular players involved in the organismal adaptations to nutrition. PMID:26641165

  1. Heavy metal adsorptivity of calcium-alginate-modified diethylenetriamine-silica gel and its application to a flow analytical system using flame atomic absorption spectrometry.

    PubMed

    Mori, Masanobu; Suzuki, Toshinobu; Sugita, Tsuyoshi; Nagai, Daisuke; Hirayama, Kazuo; Onozato, Makoto; Itabashi, Hideyuki

    2014-08-20

    This study aimed to evaluate the heavy metal adsorptivity of calcium-alginate-modified diethylenetriamine-silica gel (CaAD) and incorporate this biosorbent into a flow analytical system for heavy metal ions using flame atomic absorption spectrometry (FAAS). The biosorbent was synthesized by electrostatically coating calcium alginate onto diethylenetriamine (dien)-silica gel. Copper ion adsorption tests by a batch method showed that CaAD exhibited a higher adsorption rate compared with other biosorbents despite its low maximum adsorption capacity. Next, CaAD was packed into a 1mL microcolumn, which was connected to a flow analytical system equipped with an FAAS instrument. The flow system quantitatively adsorbed heavy metals and enriched their concentrations. This quantitative adsorption was achieved for pH 3-4 solutions containing 1.0×10(-6) M of heavy metal ions at a flow rate of 5.0 mL min(-1). Furthermore, the metal ions were successfully desorbed from CaAD at low nitric acid concentrations (0.05-0.15 M) than from the polyaminecarboxylic acid chelating resin (Chelex 100). Therefore, CaAD may be considered as a biosorbent that quickly adsorbs and easily desorbs analyte metal ions. In addition, the flow system enhanced the concentrations of heavy metals such as Cu(2+), Zn(2+), and Pb(2+) by 50-fold. This new enrichment system successfully performed the separation and determination of Cu(2+) (5.0×10(-8)M) and Zn(2+) (5.7×10(-8) M) in a river water sample and Pb(2+) (3.8×10(-9) M) in a ground water sample.

  2. Heavy metal adsorptivity of calcium-alginate-modified diethylenetriamine-silica gel and its application to a flow analytical system using flame atomic absorption spectrometry.

    PubMed

    Mori, Masanobu; Suzuki, Toshinobu; Sugita, Tsuyoshi; Nagai, Daisuke; Hirayama, Kazuo; Onozato, Makoto; Itabashi, Hideyuki

    2014-08-20

    This study aimed to evaluate the heavy metal adsorptivity of calcium-alginate-modified diethylenetriamine-silica gel (CaAD) and incorporate this biosorbent into a flow analytical system for heavy metal ions using flame atomic absorption spectrometry (FAAS). The biosorbent was synthesized by electrostatically coating calcium alginate onto diethylenetriamine (dien)-silica gel. Copper ion adsorption tests by a batch method showed that CaAD exhibited a higher adsorption rate compared with other biosorbents despite its low maximum adsorption capacity. Next, CaAD was packed into a 1mL microcolumn, which was connected to a flow analytical system equipped with an FAAS instrument. The flow system quantitatively adsorbed heavy metals and enriched their concentrations. This quantitative adsorption was achieved for pH 3-4 solutions containing 1.0×10(-6) M of heavy metal ions at a flow rate of 5.0 mL min(-1). Furthermore, the metal ions were successfully desorbed from CaAD at low nitric acid concentrations (0.05-0.15 M) than from the polyaminecarboxylic acid chelating resin (Chelex 100). Therefore, CaAD may be considered as a biosorbent that quickly adsorbs and easily desorbs analyte metal ions. In addition, the flow system enhanced the concentrations of heavy metals such as Cu(2+), Zn(2+), and Pb(2+) by 50-fold. This new enrichment system successfully performed the separation and determination of Cu(2+) (5.0×10(-8)M) and Zn(2+) (5.7×10(-8) M) in a river water sample and Pb(2+) (3.8×10(-9) M) in a ground water sample. PMID:25086892

  3. 40 CFR 63.7925 - What emissions limitations and work practice standards must I meet for closed vent systems and...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... practice standards must I meet for closed vent systems and control devices? 63.7925 Section 63.7925... Standards for Hazardous Air Pollutants: Site Remediation Closed Vent Systems and Control Devices § 63.7925 What emissions limitations and work practice standards must I meet for closed vent systems and...

  4. 40 CFR 3.2000 - What are the requirements authorized state, tribe, and local programs' reporting systems must meet?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... state, tribe, and local programs' reporting systems must meet? 3.2000 Section 3.2000 Protection of... state, tribe, and local programs' reporting systems must meet? (a) Authorized programs that receive... electronic document receiving system as specified under paragraphs (b) and (c) of this section; and...

  5. Expert Meeting Report. Recommendations for Applying Water Heaters in Combination Space and Domestic Water Heating Systems

    SciTech Connect

    Rudd, A.; Ueno, K.; Bergey, D.; Osser, R.

    2012-06-01

    This Building America expert meeting was held on 7/31/2011, in Westford, Massachusetts. Presentations and discussions centered on the design, performance, and maintenance of these combination systems, with the goal of developing foundational information toward the development of a Building America Measure Guideline on this topic.

  6. 75 FR 38068 - Public Meeting With Interested Stakeholders for National Pollutant Discharge Elimination System...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-01

    ... Pollutant Discharge Elimination System (NPDES) Electronic Reporting Rule AGENCY: Environmental Protection...) gives notice of a meeting to discuss the NPDES Electronic Reporting Rule. With this rulemaking, EPA is utilizing 21st Century modern technologies to improve management and performance of the NPDES program...

  7. 76 FR 31943 - Global Positioning System Directorate (Gpsd); Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-02

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF DEFENSE Department of the Air Force Global Positioning System Directorate (Gpsd); Notice of Meeting ACTION: Notice of..., IS-GPS-705A, IS-GPS-800A). SUMMARY: This notice informs the public that the Global...

  8. 75 FR 56140 - Meeting of the Department of Justice's (DOJ's) National Motor Vehicle Title Information System...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-15

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Office of Justice Programs Meeting of the Department of Justice's (DOJ's) National Motor Vehicle Title... Title Information System (NMVTIS) Federal Advisory Committee to discuss the role of the NMVTIS...

  9. 77 FR 44673 - Meeting of the Department of Justice National Motor Vehicle Title Information System Federal...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-30

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Office of Justice Programs Meeting of the Department of Justice National Motor Vehicle Title Information... Vehicle Title Information System (NMVTIS) Federal Advisory Committee to discuss various issues relating...

  10. 78 FR 9070 - Meeting of the Department of Justice's (DOJ's) National Motor Vehicle Title Information System...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-07

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Office of Justice Programs Meeting of the Department of Justice's (DOJ's) National Motor Vehicle Title... Title Information System (NMVTIS) Federal Advisory Committee to discuss various issues relating to...

  11. 75 FR 78247 - Medicare Program; Town Hall Meeting on Physician Quality Reporting System

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-15

    ... HUMAN SERVICES Centers for Medicare & Medicaid Services Medicare Program; Town Hall Meeting on Physician Quality Reporting System AGENCY: Centers for Medicare & Medicaid Services (CMS), HHS. ACTION: Notice of... Building of the Centers for Medicare & Medicaid Services, 7500 Security Boulevard, Baltimore, MD...

  12. Effects of Cabin Upsets on Adsorption Columns for Air Revitalization

    NASA Technical Reports Server (NTRS)

    LeVan, M. Douglas

    1999-01-01

    The National Aeronautics and Space Administration (NASA) utilizes adsorption technology as part of contaminant removal systems designed for long term missions. A variety of trace contaminants can be effectively removed from gas streams by adsorption onto activated carbon. An activated carbon adsorption column meets NASA's requirements of a lightweight and efficient means of controlling trace contaminant levels aboard spacecraft and space stations. The activated carbon bed is part of the Trace Contaminant Control System (TCCS) which is utilized to purify the cabin atmosphere. TCCS designs oversize the adsorption columns to account for irregular fluctuations in cabin atmospheric conditions. Variations in the cabin atmosphere include changes in contaminant concentrations, temperature, and relative humidity. Excessively large deviations from typical conditions can result from unusual crew activity, equipment malfunctions, or even fires. The research carried out under this award focussed in detail on the effects of cabin upsets on the performance of activated carbon adsorption columns. Both experiments and modeling were performed with an emphasis on the roll of a change in relative humidity on adsorption of trace contaminants. A flow through fixed-bed apparatus was constructed at the NASA Ames Research Center, and experiments were performed there by W. Scot Appel under the direction of Dr. John E. Finn. Modeling work was performed at the University of Virginia and at Vanderbilt University by W. Scot Appel under the direction of M. Douglas LeVan. All three participants collaborated in all of the various phases of the research. The most comprehensive document describing the research is the Ph.D. dissertation of W. Scot Appel. Results have been published in several papers and presented in talks at technical conferences. All documents have been transmitted to Dr. John E. Finn.

  13. Thermodynamics of interfacial energy in binary metallic systems: influence of adsorption on dihedral angles

    SciTech Connect

    Shimizu, I. . E-mail: ichiko@eps.s.u-tiokyo.ac.jp; Takei, Y.

    2005-02-01

    The solid-liquid interfacial energy (or interfacial tension) was investigated by the lattice-liquid statistical calculation and by the Cahn-Hilliard theory of interface. Interfacial energies in binary metallic systems were estimated from a few bulk thermodynamic properties, i.e., melting temperature, entropy of fusion, and the critical temperature of the liquid phase. In eutectic systems, interfacial energy gradually increases with decreasing concentration of the solid species in the liquid. In monotectic systems, interfacial thickening occurs and interfacial energy is reduced around the liquid immiscibility gap. The results of calculation explain the experimental data of dihedral angles fairly well.

  14. 76 FR 70531 - Fifth Meeting: RTCA Special Committee 225, Rechargeable Lithium Battery and Battery Systems-Small...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-14

    ... and Battery Systems--Small and Medium Size AGENCY: Federal Aviation Administration (FAA), U.S... Battery and Battery Systems--Small and Medium Size. SUMMARY: The FAA is issuing this notice to advise the...--Small and Medium Size for the fifth meeting. DATES: The meeting will be held November 30-December...

  15. Future of health care dominates meeting as CMA urges governments to fix “system in crisis”

    PubMed Central

    Sullivan, Patrick

    1996-01-01

    Despite some media predictions that the CMA would endorse a parallel private health care system for Canadians during its August annual meeting, General Council in fact defeated motions favouring a move to privatized health care delivery. Sixteen resolutions on the future of health and health care were passed at the meeting, and most dealt with ways to improve the existing system.

  16. Development of an in Vitro System to Simulate the Adsorption of Self-Emulsifying Tea (Camellia oleifera) Seed Oil.

    PubMed

    Sramala, Issara; Pinket, Wichchunee; Pongwan, Pawinee; Jarussophon, Suwatchai; Kasemwong, Kittiwut

    2016-01-01

    In this study, tea (Camellia oleifera) seed oil was formulated into self-emulsifying oil formulations (SEOF) to enhance the aqueous dispersibility and intestinal retention to achieve higher bioavailability. Self-emulsifying tea seed oils were developed by using different concentrations of lecithin in combination with surfactant blends (Span(®)80 and Tween(®)80). The lecithin/surfactant systems were able to provide clear and stable liquid formulations. The SEOF were investigated for physicochemical properties including appearance, emulsion droplets size, PDI and zeta potential. The chemical compositions of tea seed oil and SEOF were compared using GC-MS techniques. In addition, the oil adsorption measurement on artificial membranes was performed using a Franz cell apparatus and colorimetric analysis. The microscopic structure of membranes was observed with scanning electron microscopy (SEM). After aqueous dilution with fed-state simulated gastric fluid (FeSSGF), the droplet size of all SEOF was close to 200 nm with low PDI values and the zeta potential was negative. GC-MS chromatograms revealed that the chemical compositions of SEOF were not significantly different from that of the original tea seed oil. The morphological study showed that only the SEOF could form film layers. The oil droplets were extracted both from membrane treated with tea seed oil and the SEOF in order to evaluate the chemical compositions by GC-MS. PMID:27136528

  17. Development and Testing of a Temperature-swing Adsorption Compressor for Carbon Dioxide in Closed-loop Air Revitalization Systems

    NASA Technical Reports Server (NTRS)

    Mulloth, Lila M.; Rosen, Micha; Affleck, David; LeVan, M. Douglas; Wang, Yuan

    2005-01-01

    The air revitalization system of the International Space Station (ISS) operates in an open loop mode and relies on the resupply of oxygen and other consumables from earth for the life support of astronauts. A compressor is required for delivering the carbon dioxide from a removal assembly to a reduction unit to recover oxygen and thereby dosing the air-loop. We have developed a temperature-swing adsorption compressor (TSAC) that is energy efficient, quiet, and has no rapidly moving parts for performing these tasks. The TSAC is a solid-state compressor that has the capability to remove CO2 from a low- pressure source, and subsequently store, compress, and deliver at a higher pressure as required by a processor. The TSAC is an ideal interface device for CO2 removal and reduction units in the air revitalization loop of a spacecraft for oxygen recovery. This paper discusses the design and testing of a TSAC for carbon dioxide that has application in the ISS and future spacecraft for closing the air revitalization loop.

  18. Capital and Operating Costs of Small Arsenic Removal Adsorptive Media Systems

    EPA Science Inventory

    The U.S. Environmental Protection Agency (EPA) conducted 50 full-scale demonstration projects on treatment systems removing arsenic from drinking water in 26 states throughout the U.S. The projects were conducted to evaluate the performance, reliability, and cost of arsenic remo...

  19. The Adsorption of Arsenic on Iron Pipes in Water Distribution Systems

    EPA Science Inventory

    In order to remain compliant with the U.S. EPA’s Lead and Copper rule, it is pivotal to understand the relationship between factors affecting lead release in drinking water distribution systems. Lead solids were synthesized in cell experiments using a pH range of 6-11 with both 1...

  20. INVESTIGATION OF AMMONIA ADSORPTION ON FLY ASH DUE TO INSTALLATION OF SELECTIVE CATALYTIC REDUCTION SYSTEMS

    SciTech Connect

    G.F. Brendel; J.E. Bonetti; R.F. Rathbone; R.N. Frey Jr.

    2000-11-01

    This report summarizes an investigation of the potential impacts associated with the utilization of selective catalytic reduction (SCR) systems at coal-fired power plants. The study was sponsored by the U.S. Department of Energy Emission Control By-Products Consortium, Dominion Generation, the University of Kentucky Center for Applied Energy Research and GAI Consultants, Inc. SCR systems are effective in reducing nitrogen oxides (NOx) emissions as required by the Clean Air Act (CAA) Amendments. However, there may be potential consequences associated with ammonia contamination of stack emissions and combustion by-products from these systems. Costs for air quality, landfill and pond environmental compliance may increase significantly and the marketability of ash may be seriously reduced, which, in turn, may also lead to increased disposal costs. The potential impacts to air, surface water, groundwater, ash disposal, ash utilization, health and safety, and environmental compliance can not be easily quantified based on the information presently available. The investigation included: (1) a review of information and data available from published and unpublished sources; (2) baseline ash characterization testing of ash samples produced from several central Appalachian high-volatile bituminous coals from plants that do not currently employ SCR systems in order to characterize the ash prior to ammonia exposure; (3) an investigation of ammonia release from fly ash, including leaching and thermal studies; and (4) an evaluation of the potential impacts on plant equipment, air quality, water quality, ash disposal operations, and ash marketing.

  1. Short-Cycle Adsorption Refrigerator

    NASA Technical Reports Server (NTRS)

    Chan, C. K.

    1988-01-01

    Modular adsorption/Joule-Thomson-effect refrigerator offers fast regeneration; adsorption/desorption cycle time expected to be 1 minute. Pressurized hydrogen generated by bank of compressor modules during heating phase passes through system of check valves and expands in Joule-Thomson junction as it enters refrigeration chamber. Hydrogen absorbs heat from load before it is sucked out by another bank of compressor modules in cooling phase.

  2. Proceedings of the seventh annual gasification and gas stream cleanup systems contractors review meeting: Volume 2

    SciTech Connect

    Ghate, M.R.; Markel, K.E. Jr.; Jarr, L.A.; Bossart, S.J.

    1987-08-01

    On June 16 through 19, 1987, METC sponsored the Seventh Annual Gasification and Gas Stream Cleanup Systems Contractors Review Meeting which was held at the Sheraton Lakeview Conference Center in Morgantown, West Virginia. The primary purpose of the meeting was threefold: to review the technical progress and current status of the gasification and gas stream cleanup projects sponsored by the Department of Energy; to foster technology exchange among participating researchers and other technical communities; to facilitate interactive dialogues which would identify research needs that would make coal-based gasification systems more attractive economically and environmentally. More than 310 representatives of Government, academia, industry, and foreign energy research organizations attended the 4-day meeting. Fifty-three papers and thirty poster dsplays were presented summarizing recent developments in the gasification and gas stream cleanup programs. Volume II covers papers presented at sessions 5 and 6 on system for the production of synthesis gas, and on system for the production of power. All papers have been processed for inclusion in the Energy Data Base.

  3. Validation Methods for Fault-Tolerant avionics and control systems, working group meeting 1

    NASA Technical Reports Server (NTRS)

    1979-01-01

    The proceedings of the first working group meeting on validation methods for fault tolerant computer design are presented. The state of the art in fault tolerant computer validation was examined in order to provide a framework for future discussions concerning research issues for the validation of fault tolerant avionics and flight control systems. The development of positions concerning critical aspects of the validation process are given.

  4. Adsorption of organic chemicals in soils.

    PubMed Central

    Calvet, R

    1989-01-01

    This paper presents a review on adsorption of organic chemicals on soils sediments and their constituents. The first part of this review deals with adsorption from gas and liquid phases and gives a discussion on the physical meaning of the shape of adsorption isotherms. Results show that no general rules can be proposed to describe univocally the relation between the shape of isotherms and the nature of adsorbate-adsorbent system. Kinetics of adsorption is discussed through the description of various models. Theoretical developments exist both for the thermodynamics and the kinetics of adsorption, but there is a strong need for experimental results. Possible adsorption mechanisms are ion exchange, interaction with metallic cations, hydrogen bonds, charge transfers, and London-van der Waals dispersion forces/hydrophobic effect. However, direct proofs of a given mechanism are rare. Several factors influence adsorption behavior. Electronic structure of adsorbed molecules, properties of adsorbents, and characteristics of the liquid phase are discussed in relation to adsorption. Such properties as water solubility, organic carbon content of adsorbing materials, and the composition of the liquid phase are particularly important. Evaluation of adsorption can be obtained through either laboratory measurements or use of several correlations. Adsorption measurements must be interpreted, taking into account treatment of adsorbent materials, experimental conditions, and secondary phenomena such as degradations. Correlations between adsorption coefficients and water-octanol partition coefficient or water solubility are numerous. They may be useful tools for prediction purposes. Relations with transport, bioavailability, and degradation are described. PMID:2695323

  5. Adsorption of organic chemicals in soils.

    PubMed

    Calvet, R

    1989-11-01

    This paper presents a review on adsorption of organic chemicals on soils sediments and their constituents. The first part of this review deals with adsorption from gas and liquid phases and gives a discussion on the physical meaning of the shape of adsorption isotherms. Results show that no general rules can be proposed to describe univocally the relation between the shape of isotherms and the nature of adsorbate-adsorbent system. Kinetics of adsorption is discussed through the description of various models. Theoretical developments exist both for the thermodynamics and the kinetics of adsorption, but there is a strong need for experimental results. Possible adsorption mechanisms are ion exchange, interaction with metallic cations, hydrogen bonds, charge transfers, and London-van der Waals dispersion forces/hydrophobic effect. However, direct proofs of a given mechanism are rare. Several factors influence adsorption behavior. Electronic structure of adsorbed molecules, properties of adsorbents, and characteristics of the liquid phase are discussed in relation to adsorption. Such properties as water solubility, organic carbon content of adsorbing materials, and the composition of the liquid phase are particularly important. Evaluation of adsorption can be obtained through either laboratory measurements or use of several correlations. Adsorption measurements must be interpreted, taking into account treatment of adsorbent materials, experimental conditions, and secondary phenomena such as degradations. Correlations between adsorption coefficients and water-octanol partition coefficient or water solubility are numerous. They may be useful tools for prediction purposes. Relations with transport, bioavailability, and degradation are described.

  6. Proceedings of the seventh annual gasification and gas stream cleanup systems contractors review meeting: Volume 1

    SciTech Connect

    Ghate, M.R.; Markel, K.E. Jr.; Jarr, L.A.; Bossart, S.J.

    1987-08-01

    On June 16 through 19, 1987, METC sponsored the Seventh Annual Gasification and Gas Stream Cleanup Systems Contractors Review Meeting which was held at the Sheraton Lakeview Conference Center in Morgantown, West Virginia. The primary purpose of the meeting was threefold: to review the technical progress and current status of the gasification and gas stream cleanup projects sponsored by the Department of Energy; to foster technology exchange among participating researchers and other technical communities; to facilitate interactive dialogues which would identify research needs that would make coal-based gasification systems more attractive economically and environmentally. More than 310 representatives of Government, academia, industry, and foreign energy research organizations attended the 4-day meeting. Fifty-three papers and thirty poster displays were presented summarizing recent developments in the gasification and gas stream cleanup programs. Volume I covers information presented at sessions 1 through 4 on systems for the production of Co-products and industrial fuel gas, environmental projects, and components and materials. Individual papers have been processed for the Energy Data Base.

  7. Extracorporeal adsorption of endotoxin.

    PubMed

    Staubach, K H; Rosenfeldt, J A; Veit, O; Bruch, H P

    1997-02-01

    In a porcine endotoxin shock model using a continuous intravenous endotoxin infusion of 250 ng/kg body weight per hour, the cardiorespiratory and hematologic parameters were studied while applying a new on-line polymyxin B immobilized adsorption system. This preliminary report shows that the new adsorbent can remove endotoxin selectively from the circulation and confers a good amount of protection from endotoxin-induced cardiopulmonary decompensation as well as hematologic alterations. Survival time could be extended from 216 min to 313 min. Whereas cardiac output and mean arterial pressure declined critically after 3 h in the controls, the treated group remained stable for another 3 h. These data show that endotoxin adsorption by polymyxin B coupled covalently to acrylic spheres as an adjunctive on-line measure in the septic syndrome seems feasible. PMID:10225785

  8. A biodegradable polymeric system for peptide-protein delivery assembled with porous microspheres and nanoparticles, using an adsorption/infiltration process.

    PubMed

    Alcalá-Alcalá, Sergio; Urbán-Morlán, Zaida; Aguilar-Rosas, Irene; Quintanar-Guerrero, David

    2013-01-01

    A biodegradable polymeric system is proposed for formulating peptides and proteins. The systems were assembled through the adsorption of biodegradable polymeric nanoparticles onto porous, biodegradable microspheres by an adsorption/infiltration process with the use of an immersion method. The peptide drug is not involved in the manufacturing of the nanoparticles or in obtaining the microspheres; thus, contact with the organic solvent, interfaces, and shear forces required for the process are prevented during drug loading. Leuprolide acetate was used as the model peptide, and poly(d,l-lactide-co-glycolide) (PLGA) was used as the biodegradable polymer. Leuprolide was adsorbed onto different amounts of PLGA nanoparticles (25 mg/mL, 50 mg/mL, 75 mg/mL, and 100 mg/mL) in a first stage; then, these were infiltrated into porous PLGA microspheres (100 mg) by dipping the structures into a microsphere suspension. In this way, the leuprolide was adsorbed onto both surfaces (ie, nanoparticles and microspheres). Scanning electron microscopy studies revealed the formation of a nanoparticle film on the porous microsphere surface that becomes more continuous as the amount of infiltrated nanoparticles increases. The adsorption efficiency and release rate are dependent on the amount of adsorbed nanoparticles. As expected, a greater adsorption efficiency (~95%) and a slower release rate were seen (~20% of released leuprolide in 12 hours) when a larger amount of nanoparticles was adsorbed (100 mg/mL of nanoparticles). Leuprolide acetate begins to be released immediately when there are no infiltrated nanoparticles, and 90% of the peptide is released in the first 12 hours. In contrast, the systems assembled in this study released less than 44% of the loaded drug during the same period of time. The observed release profiles denoted a Fickian diffusion that fit Higuchi's model (t(1/2)). The manufacturing process presented here may be useful as a potential alternative for formulating

  9. Functionalized Nanoporous Silica for Removal of Heavy Metals from Biological Systems; Adsorption and Application

    SciTech Connect

    Yantasee, Wassana; Rutledge, Ryan D.; Chouyyok, Wilaiwan; Sukwarotwat, Vichaya; Orr, Galya; Warner, Cynthia L.; Warner, Marvin G.; Fryxell, Glen E.; Wiacek, Robert J.; Timchalk, Charles; Addleman, Raymond S.

    2010-10-01

    Functionalized nanoporous silica, often referred to as self-assembled monolayers on mesoporous supports (SAMMS) have previously demonstrated the ability to serve as very effective heavy metal sorbents in a range of aquatic and environmental systems suggesting they may be advantageously utilized for biomedical applications such as chelation therapy. Herein we evaluate surface chemistries for heavy metal capture from biological fluids, various facets of the materials biocompatibility and the suitability of these materials as potential therapeutics. Of the materials tested, thiol-functionalized SAMMS proved most capable of removing selected heavy metals from biological solutions (i.e. blood, urine, etc.) As a result, thiol SAMMS was further analyzed to assess the material’s performance under a number of different biologically relevant conditions (i.e. variable pH and ionic strength) as well to gauge any potentially negative cellular effects resulting from interaction with the sorbent, such as cellular toxicity or possible chelation of essential minerals. Additionally, cellular uptake studies demonstrated no cell membrane permeation by the silica-based materials generally highlighting their ability to remain cellularly inert and thus non-toxic. As a result, it has been determined that organic ligand-functionalized nanoporous silica materials could be a valuable material for detoxification therapeutics and potentially other biomedical applications as needed.

  10. Functionalized Nanoporous Silica for the Removal of Heavy Metals from Biological Systems: Adsorption and Application

    PubMed Central

    Yantasee, Wassana; Rutledge, Ryan D.; Chouyyok, Wilaiwan; Sukwarotwat, Vichaya; Orr, Galya; Warner, Cynthia L.; Warner, Marvin G.; Fryxell, Glen E.; Wiacek, Robert J.; Timchalk, Charles; Addleman, R. Shane

    2012-01-01

    Surface-functionalized nanoporous silica, often referred to as self-assembled monolayers on mesoporous supports (SAMMS), has previously demonstrated the ability to serve as very effective heavy metal sorbents in a range of aquatic and environmental systems, suggesting that they may be advantageously utilized for biomedical applications such as chelation therapy. Herein we evaluate surface chemistries for heavy metal capture from biological fluids, various facets of the materials’ biocompatibility, and the suitability of these materials as potential therapeutics. Of the materials tested, thiol-functionalized SAMMS proved most capable of removing selected heavy metals from biological solutions (i.e., blood, urine, etc.) Consequentially, thiol-functionalized SAMMS was further analyzed to assess the material’s performance under a number of different biologically relevant conditions (i.e., variable pH and ionic strength) to gauge any potentially negative effects resulting from interaction with the sorbent, such as cellular toxicity or the removal of essential minerals. Additionally, cellular uptake studies demonstrated no cell membrane permeation by the silica-based materials generally highlighting their ability to remain cellularly inert and thus nontoxic. The results show that organic ligand functionalized nanoporous silica could be a valuable material for a range of detoxification therapies and potentially other biomedical applications. PMID:20939537

  11. Functionalized nanoporous silica for the removal of heavy metals from biological systems: adsorption and application.

    PubMed

    Yantasee, Wassana; Rutledge, Ryan D; Chouyyok, Wilaiwan; Sukwarotwat, Vichaya; Orr, Galya; Warner, Cynthia L; Warner, Marvin G; Fryxell, Glen E; Wiacek, Robert J; Timchalk, Charles; Addleman, R Shane

    2010-10-01

    Surface-functionalized nanoporous silica, often referred to as self-assembled monolayers on mesoporous supports (SAMMS), has previously demonstrated the ability to serve as very effective heavy metal sorbents in a range of aquatic and environmental systems, suggesting that they may be advantageously utilized for biomedical applications such as chelation therapy. Herein we evaluate surface chemistries for heavy metal capture from biological fluids, various facets of the materials' biocompatibility, and the suitability of these materials as potential therapeutics. Of the materials tested, thiol-functionalized SAMMS proved most capable of removing selected heavy metals from biological solutions (i.e., blood, urine, etc.) Consequentially, thiol-functionalized SAMMS was further analyzed to assess the material's performance under a number of different biologically relevant conditions (i.e., variable pH and ionic strength) to gauge any potentially negative effects resulting from interaction with the sorbent, such as cellular toxicity or the removal of essential minerals. Additionally, cellular uptake studies demonstrated no cell membrane permeation by the silica-based materials generally highlighting their ability to remain cellularly inert and thus nontoxic. The results show that organic ligand functionalized nanoporous silica could be a valuable material for a range of detoxification therapies and potentially other biomedical applications. PMID:20939537

  12. 77 FR 45372 - Notice of August 16, 2012, Teleconference Meeting of the National Park System Advisory Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-31

    ... public in the same way that other Board meetings have been open to the public. Space and facilities to accommodate the public are limited and attendees will be accommodated on a first-come basis. Opportunities for... System Advisory Board will conduct a teleconference meeting on August 16, 2012. Members of the public...

  13. Second NASA Technical Interchange Meeting (TIM): Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box (TTB)

    NASA Technical Reports Server (NTRS)

    ONeil, D. A.; Mankins, J. C.; Christensen, C. B.; Gresham, E. C.

    2005-01-01

    The Advanced Technology Lifecycle Analysis System (ATLAS), a spreadsheet analysis tool suite, applies parametric equations for sizing and lifecycle cost estimation. Performance, operation, and programmatic data used by the equations come from a Technology Tool Box (TTB) database. In this second TTB Technical Interchange Meeting (TIM), technologists, system model developers, and architecture analysts discussed methods for modeling technology decisions in spreadsheet models, identified specific technology parameters, and defined detailed development requirements. This Conference Publication captures the consensus of the discussions and provides narrative explanations of the tool suite, the database, and applications of ATLAS within NASA s changing environment.

  14. 77 FR 16890 - Eighteenth Meeting: RTCA Special Committee 213, Enhanced Flight Visions Systems/Synthetic Vision...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-22

    ... Federal Aviation Administration Eighteenth Meeting: RTCA Special Committee 213, Enhanced Flight Visions... of Transportation (DOT). ACTION: Notice of meeting RTCA Special Committee 213, Enhanced Flight... public of the eighteenth meeting of RTCA Special Committee 213, Enhanced Flight Visions...

  15. 75 FR 38863 - Tenth Meeting: Joint RTCA Special Committee 213: EUROCAE WG-79: Enhanced Flight Vision Systems...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-06

    ... Flight Vision Systems/Synthetic Vision Systems (EFVS/SVS) AGENCY: Federal Aviation Administration (FAA.../Synthetic Vision Systems (EFVS/SVS). SUMMARY: The FAA is issuing this notice to advise the public of a... Systems/Synthetic Vision Systems (EFVS/SVS) meeting. The agenda will include: Tuesday, 27 July...

  16. 78 FR 5557 - Twenty-First Meeting: RTCA Special Committee 213, Enhanced Flight Vision Systems/Synthetic Vision...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-25

    ... Systems/Synthetic Vision Systems (EFVS/SVS) AGENCY: Federal Aviation Administration (FAA), U.S. Department... Systems/Synthetic Vision Systems (EFVS/SVS). SUMMARY: The FAA is issuing this notice to advise the public.../Synthetic Vision Systems (EFVS/SVS). DATES: The meeting will be held February 5-7, 2013 from 9:00...

  17. 40 CFR 63.7927 - What are my inspection and monitoring requirements for closed vent systems and control devices?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... cooling cycle). (c) If you use a nonregenerable carbon adsorption system, you must use a CPMS to measure... required by § 63.693(c)(2)(ii). (b) If you use a regenerable carbon adsorption system, you must meet the... (CPMS) to measure and record the hourly average total regeneration stream mass flow during each...

  18. Surveillance of aseptic central nervous system infections in Poland: is it meeting its objectives?

    PubMed

    Stefanoff, P; Rogalska, J; Zajkowska, J; Czerska, M; Seroka, W; Czarkowski, M P

    2011-01-01

    In Poland, a surveillance system capturing generic information on both diagnosed and undiagnosed aseptic central nervous system infections (ACI) has been in operation since 1966. This study evaluates to what extent the ACI surveillance is able to meet its objectives to monitor ACI trends and to detect signals of public health importance such as enteroviral outbreaks, tick-borne encephalitis (TBE) endemic foci, poliovirus appearance or emergence of new neurotropic viruses. Between 2004 and 2008, aetiology was established for 17% of ACI cases. Of the 1,994 reported ACI cases, 232 (11.6%) were diagnosed with TBE virus, 46 (2.3%) with enterovirus, 35 (1.8%) with herpesvirus, and 32 (1.6%) had other viral causes such as Epstein Barr virus or adenovirus. The system's performance varied between the provinces, with the frequency of suspected ACI cases referred for viral aetiology investigation in 2008 ranging from 1.98 to 285.4 samples per million inhabitants. The sensitivity of physicians' reporting, estimated as the proportion of hospitalised ACI cases reported to the surveillance system, was 48% nationally, with vast regional differences (range 30–91%). To conclude, the ACI surveillance system in Poland does currently not meet its objectives, due to limited availability of aetiological diagnosis and microbiological confirmation and to regional differences in reporting sensitivity. PMID:21801691

  19. Adsorption of Pb(II) on the kaolinite(0 0 1) surface in aqueous system: A DFT approach

    NASA Astrophysics Data System (ADS)

    Wang, Juan; Xia, Shuwei; Yu, Liangmin

    2015-06-01

    A systematic first-principles model study of Pb(II) adsorption on the basal hydroxylated (0 0 1) surface of kaolinite in aqueous environment was carried out using periodic DFT slab calculations. The effective coordination number, coordination geometry, preferred adsorption position and adsorption type of Pb(II) complex were examined, with two different types of surface sites (Ou with "up" hydrogen and Ol with "lying" hydrogen) considered. Complexes in mono-, bi- and tri-dentate modes exhibit coordination number of 3-5 within the hemidirected tendency geometry. The monodentate complex on "Ou" site and the tridentate complex on "Ou-Ou-Ol" site of two neighboring Al centers are found to be the major adsorption species. Hydrogen bonding interaction of surface Ol with hydrogen of aqua ligands acts as the key factor for the stability of complex. Partial density of state (PDOS) projections combining with Mulliken bond populations show that coupling of Pb 6p with the antibonding Pb 6s-O 2p states is the dominant orbital interaction of Pb(II) with aqua oxygen (Ow) or surface oxygen (Os). Different from the covalent Pbsbnd Ow, bond of Pbsbnd Os displays strong ionic characters.

  20. Optically active microspheres constructed by helical substituted polyacetylene and used for adsorption of organic compounds in aqueous systems.

    PubMed

    Liang, Junya; Song, Ci; Deng, Jianping

    2014-11-12

    This article reports optically active microspheres consisting of chiral helical substituted polyacetylene and β-cyclodextrin-derivative (β-CD-A). The microspheres showed remarkable adsorption toward various organic compounds in water. To prepare the microspheres, an acetylenic-derived helical macro-monomer was synthesized and then underwent aqueous suspension copolymerization with octadecyl acrylate and butyl acrylate by using azobis(isobutyronitrile) as initiator and β-CD-A simultaneously as comonomer and cross-linking agent. The helical macro-monomer chains enabled the microspheres to exhibit desirable enantio-differentiating adsorption capacity toward chiral compounds respectively dissolved in organic solvent, dispersed in water, and dissolved in water. The saturated absorbency toward (R)-(+)- and (S)-(-)-1-phenylethylamine was 29 and 12 mg · g(-1), respectively. The microspheres also showed large oil absorbency (e.g., 22 g · g(-1) CCl4) and a large adsorption toward methyl red (as a model for organic dyes) dispersed in water. The presence of β-CD-A moieties improved the adsorption performance of the microspheres. The present optically active microspheres open a new approach for preparing adsorbents particularly chiral adsorbents with potentials for wastewater treatment. PMID:25290256

  1. Modulating adsorption and stability properties in pillared metal-organic frameworks: a model system for understanding ligand effects.

    PubMed

    Burtch, Nicholas C; Walton, Krista S

    2015-11-17

    Metal-organic frameworks (MOFs) are nanoporous materials with highly tunable properties that make them ideal for a wide array of adsorption applications. Through careful choice of metal and ligand precursors, one can target the specific functionality and pore characteristics desired for the application of interest. However, among the wide array of MOFs reported in the literature, there are varying trends in the effects that ligand identity has on the adsorption, chemical stability, and intrinsic framework dynamics of the material. This is largely due to ligand effects being strongly coupled with structural properties arising from the differing topologies among frameworks. Given the important role such properties play in dictating adsorbent performance, understanding these effects will be critical for the design of next generation functional materials. Pillared MOFs are ideal platforms for understanding how ligand properties can affect the adsorption, stability, and framework dynamics in MOFs. In this Account, we highlight our recent work demonstrating how experiment and simulation can be used to understand the important role ligand identity plays in governing the properties of isostructural MOFs containing interconnected layers pillared by bridging ligands. Changing the identity of the linear, ditopic ligand in either the 2-D layer or the pillaring third dimension allows targeted modulation of the chemical functionality, porosity, and interpenetration of the framework. We will discuss how these characteristics can have important consequences on the adsorption, chemical stability, and dynamic properties of pillared MOFs. The structures discussed in this Account comprise the greatest diversity of isostructural MOFs whose stability properties have been studied, allowing valuable insight into how ligand properties dictate the chemical stability of isostructural frameworks. We also discuss how functional groups can affect adsorbate energetics at their most favorable

  2. Centrifugal adsorption system

    NASA Technical Reports Server (NTRS)

    Gonda, Steve R. (Inventor); Tsao, Yow-Min D. (Inventor); Lee, Wenshan (Inventor)

    2006-01-01

    A gas-liquid separator uses a helical passageway to impart a spiral motion to a fluid passing therethrough. The centrifugal force generated by the spiraling motion urges the liquid component of the fluid radially outward which forces the gas component radially inward. The gas component is then separated through a gas-permeable, liquid-impervious membrane and discharged through a central passageway. A filter material captures target substances contained in the fluid.

  3. Adsorption of apolar molecules at the water liquid-vapor interface: A Monte Carlo simulations study of the water-n-octane system

    NASA Astrophysics Data System (ADS)

    Jedlovszky, Pál; Varga, Imre; Gilányi, Tibor

    2003-07-01

    The adsorption of n-octane at the water liquid-vapor interface has been investigated by Monte Carlo computer simulation. For this purpose, simulation of five different water-apolar interfacial systems have been performed, in which the number of n-octane molecules has been varied. The results clearly show that the apolar n-octane molecules are adsorbed from the vapor phase at the interface. The adsorption is driven by the weak attraction due to the dispersion forces acting between the water molecules and the methyl and methylene groups of the octanes. This weak attraction is, however, amplified by the fact that it is added up for the CH2 and CH3 groups belonging to the same molecule. Consistently, the n-octane molecules located closest to the aqueous phase are found to prefer all-trans conformation and parallel alignment with the plane of the interface. On the other hand, entropic effects become more important among the molecules of the outer part of the adsorption layer. Hence, the preferred orientation of these molecules is perpendicular to the interface, as they can be extended toward the less dense region of the apolar phase; and gauche dihedrals appear more frequently here than among the molecules located next to the aqueous phase.

  4. Carbon nanotube membranes with ultrahigh specific adsorption capacity for water desalination and purification.

    PubMed

    Yang, Hui Ying; Han, Zhao Jun; Yu, Siu Fung; Pey, Kin Leong; Ostrikov, Kostya; Karnik, Rohit

    2013-01-01

    Development of technologies for water desalination and purification is critical to meet the global challenges of insufficient water supply and inadequate sanitation, especially for point-of-use applications. Conventional desalination methods are energy and operationally intensive, whereas adsorption-based techniques are simple and easy to use for point-of-use water purification, yet their capacity to remove salts is limited. Here we report that plasma-modified ultralong carbon nanotubes exhibit ultrahigh specific adsorption capacity for salt (exceeding 400% by weight) that is two orders of magnitude higher than that found in the current state-of-the-art activated carbon-based water treatment systems. We exploit this adsorption capacity in ultralong carbon nanotube-based membranes that can remove salt, as well as organic and metal contaminants. These ultralong carbon nanotube-based membranes may lead to next-generation rechargeable, point-of-use potable water purification appliances with superior desalination, disinfection and filtration properties. PMID:23941894

  5. Carbon nanotube membranes with ultrahigh specific adsorption capacity for water desalination and purification.

    PubMed

    Yang, Hui Ying; Han, Zhao Jun; Yu, Siu Fung; Pey, Kin Leong; Ostrikov, Kostya; Karnik, Rohit

    2013-01-01

    Development of technologies for water desalination and purification is critical to meet the global challenges of insufficient water supply and inadequate sanitation, especially for point-of-use applications. Conventional desalination methods are energy and operationally intensive, whereas adsorption-based techniques are simple and easy to use for point-of-use water purification, yet their capacity to remove salts is limited. Here we report that plasma-modified ultralong carbon nanotubes exhibit ultrahigh specific adsorption capacity for salt (exceeding 400% by weight) that is two orders of magnitude higher than that found in the current state-of-the-art activated carbon-based water treatment systems. We exploit this adsorption capacity in ultralong carbon nanotube-based membranes that can remove salt, as well as organic and metal contaminants. These ultralong carbon nanotube-based membranes may lead to next-generation rechargeable, point-of-use potable water purification appliances with superior desalination, disinfection and filtration properties.

  6. A rapid whole genome sequencing and analysis system supporting genomic epidemiology (7th Annual SFAF Meeting, 2012)

    SciTech Connect

    FitzGerald, Michael

    2012-06-01

    Michael FitzGerald on "A rapid whole genome sequencing and analysis system supporting genomic epidemiology" at the 2012 Sequencing, Finishing, Analysis in the Future Meeting held June 5-7, 2012 in Santa Fe, New Mexico.

  7. A rapid whole genome sequencing and analysis system supporting genomic epidemiology (7th Annual SFAF Meeting, 2012)

    ScienceCinema

    FitzGerald, Michael [Broad Institute

    2016-07-12

    Michael FitzGerald on "A rapid whole genome sequencing and analysis system supporting genomic epidemiology" at the 2012 Sequencing, Finishing, Analysis in the Future Meeting held June 5-7, 2012 in Santa Fe, New Mexico.

  8. 75 FR 71183 - Twelfth Meeting: Joint RTCA Special Committee 213: EUROCAE WG-79: Enhanced Flight Vision Systems...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-22

    ...: Enhanced Flight Vision Systems/Synthetic Vision Systems (EFVS/SVS) AGENCY: Federal Aviation Administration... Flight Vision Systems/Synthetic Vision Systems (EFVS/SVS). SUMMARY: The FAA is issuing this notice to advise the public of a meeting of Joint RTCA Special Committee 213: EUROCAE WG-79: Enhanced Flight...

  9. Methane and CO2 Adsorption and Transport in Carbon-based Systems from Experiments and Molecular Simulation

    NASA Astrophysics Data System (ADS)

    Wilcox, Jennifer; Firouzi, Mahnaz; Rupp, Erik; Haghapanah, Reza; Wang, Beibei

    2013-04-01

    Carbon capture and sequestration is one strategy that could potentially mitigate gigatons of CO2 emissions per year; however, technical obstacles have thus far hindered wide-scale deployment of this strategy. To design efficient and reliable strategies for either carbon capture or sequestration at the full-scale, one needs to understand the chemical and physical properties of CO2 and its interaction with its local surroundings at the molecular-scale. To investigate the chemical and physical properties of CO2 and its local surroundings at the molecular-scale, surface characterization studies are carried out alongside theoretical model efforts. Experimental investigation of CO2 interactions with organic-based porous materials ranging in complexity from functionalized graphene and activated carbon to various-rank coal and gas shale samples to create a set of realistic models that take into account both surface and pore heterogeneity. Integration of theory and experiments takes place to allow for the relevant physics at the molecular-level to be revealed. Determining adsorption and transport phenomena of CO2 (and mixtures, including H2O, and CH4) within the model pore systems can be used to understand the complex pore matrices of carbon-based sorbents, coal, and the organic components of gas shale that are crucial to determining their carbon capture or sequestration potential. Non-equilibrium molecular dynamics (NEMD) simulations of pure carbon dioxide, methane, helium and their mixtures have been carried out in carbon slit pores to investigate gas slippage and Klinkenberg effects in the organic matrices of coal and gas shale rocks. NEMD techniques are ideally suited for the experimental situation in which an external driving force, such as a chemical potential or pressure gradient, are applied on the system. Simulations have been conducted to determine the effect of pore size and exposure to an external potential on the velocity profile and slip-stick boundary

  10. Advanced Mixed Waste Treatment Project melter system preliminary design technical review meeting

    SciTech Connect

    Eddy, T.L.; Raivo, B.D.; Soelberg, N.R.; Wiersholm, O.

    1995-02-01

    The Idaho National Engineering Laboratory Advanced Mixed Waste Treatment Project sponsored a plasma are melter technical design review meeting to evaluate high-temperature melter system configurations for processing heterogeneous alpha-contaminated low-level radioactive waste (ALLW). Thermal processing experts representing Department of Energy contractors, the Environmental Protection Agency, and private sector companies participated in the review. The participants discussed issues and evaluated alternative configurations for three areas of the melter system design: plasma torch melters and graphite arc melters, offgas treatment options, and overall system configuration considerations. The Technical Advisory Committee for the review concluded that graphite arc melters are preferred over plasma torch melters for processing ALLW. Initiating involvement of stakeholders was considered essential at this stage of the design. For the offgas treatment system, the advisory committee raised the question whether to a use wet-dry or a dry-wet system. The committee recommended that the waste stream characterization, feed preparation, and the control system are essential design tasks for the high-temperature melter treatment system. The participants strongly recommended that a complete melter treatment system be assembled to conduct tests with nonradioactive surrogate waste material. A nonradioactive test bed would allow for inexpensive design and operational changes prior to assembling a system for radioactive waste treatment operations.

  11. Tc-99 Adsorption on Selected Activated Carbons - Batch Testing Results

    SciTech Connect

    Mattigod, Shas V.; Wellman, Dawn M.; Golovich, Elizabeth C.; Cordova, Elsa A.; Smith, Ronald M.

    2010-12-01

    CH2M HILL Plateau Remediation Company (CHPRC) is currently developing a 200-West Area groundwater pump-and-treat system as the remedial action selected under the Comprehensive Environmental Response, Compensation, and Liability Act Record of Decision for Operable Unit (OU) 200-ZP-1. This report documents the results of treatability tests Pacific Northwest National Laboratory researchers conducted to quantify the ability of selected activated carbon products (or carbons) to adsorb technetium-99 (Tc-99) from 200-West Area groundwater. The Tc-99 adsorption performance of seven activated carbons (J177601 Calgon Fitrasorb 400, J177606 Siemens AC1230AWC, J177609 Carbon Resources CR-1240-AW, J177611 General Carbon GC20X50, J177612 Norit GAC830, J177613 Norit GAC830, and J177617 Nucon LW1230) were evaluated using water from well 299-W19-36. Four of the best performing carbons (J177606 Siemens AC1230AWC, J177609 Carbon Resources CR-1240-AW, J177611 General Carbon GC20X50, and J177613 Norit GAC830) were selected for batch isotherm testing. The batch isotherm tests on four of the selected carbons indicated that under lower nitrate concentration conditions (382 mg/L), Kd values ranged from 6,000 to 20,000 mL/g. In comparison. Under higher nitrate (750 mg/L) conditions, there was a measureable decrease in Tc-99 adsorption with Kd values ranging from 3,000 to 7,000 mL/g. The adsorption data fit both the Langmuir and the Freundlich equations. Supplemental tests were conducted using the two carbons that demonstrated the highest adsorption capacity to resolve the issue of the best fit isotherm. These tests indicated that Langmuir isotherms provided the best fit for Tc-99 adsorption under low nitrate concentration conditions. At the design basis concentration of Tc 0.865 µg/L(14,700 pCi/L), the predicted Kd values from using Langmuir isotherm constants were 5,980 mL/g and 6,870 mL/g for for the two carbons. These Kd values did not meet the target Kd value of 9,000 mL/g. Tests

  12. Adsorption of carbon oxide and nitrogen oxide molecules on the surface of the Ni/MgO(111) system

    NASA Astrophysics Data System (ADS)

    Magkoev, T. T.; Turiev, A. M.; Tsidaeva, N. I.; Pantileev, D. G.

    2009-10-01

    The coadsorption of carbon oxide (CO) and nitrogen oxide (NO) molecules on the surface of nickel nanoclusters formed on a thin magnesium oxide MgO(111) film grown on the Mo(110) face in an ultrahigh vacuum is studied by reflective infrared spectroscopy and thermodesorption spectroscopy (TDS). The adsorption of NO molecules is found to substantially change the state of the initially adsorbed CO molecules. The TDS and IR spectra suggest that the adsorption of NO molecules stimulates the surface migration of CO molecules from the surface of metallic clusters to the cluster-oxide interface, which is accompanied by a decrease in the angle of inclination of the molecular axis to the surface.

  13. Development of facile property calculation model for adsorption chillers based on equilibrium adsorption cycle

    NASA Astrophysics Data System (ADS)

    Yano, Masato; Hirose, Kenji; Yoshikawa, Minoru; Thermal management technology Team

    Facile property calculation model for adsorption chillers was developed based on equilibrium adsorption cycles. Adsorption chillers are one of promising systems that can use heat energy efficiently because adsorption chillers can generate cooling energy using relatively low temperature heat energy. Properties of adsorption chillers are determined by heat source temperatures, adsorption/desorption properties of adsorbent, and kinetics such as heat transfer rate and adsorption/desorption rate etc. In our model, dependence of adsorption chiller properties on heat source temperatures was represented using approximated equilibrium adsorption cycles instead of solving conventional time-dependent differential equations for temperature changes. In addition to equilibrium cycle calculations, we calculated time constants for temperature changes as functions of heat source temperatures, which represent differences between equilibrium cycles and real cycles that stemmed from kinetic adsorption processes. We found that the present approximated equilibrium model could calculate properties of adsorption chillers (driving energies, cooling energies, and COP etc.) under various driving conditions quickly and accurately within average errors of 6% compared to experimental data.

  14. Effect of organic-matter type and thermal maturity on methane adsorption in shale-gas systems

    USGS Publications Warehouse

    Zhang, Tongwei; Ellis, Geoffrey S.; Ruppel, Stephen C.; Milliken, Kitty; Yang, Rongsheng

    2012-01-01

    A series of methane (CH4) adsorption experiments on bulk organic rich shales and their isolated kerogens were conducted at 35 °C, 50 °C and 65 °C and CH4 pressure of up to 15 MPa under dry conditions. Samples from the Eocene Green River Formation, Devonian–Mississippian Woodford Shale and Upper Cretaceous Cameo coal were studied to examine how differences in organic matter type affect natural gas adsorption. Vitrinite reflectance values of these samples ranged from 0.56–0.58 %Ro. In addition, thermal maturity effects were determined on three Mississippian Barnett Shale samples with measured vitrinite reflectance values of 0.58, 0.81 and 2.01 %Ro. For all bulk and isolated kerogen samples, the total amount of methane adsorbed was directly proportional to the total organic carbon (TOC) content of the sample and the average maximum amount of gas sorption was 1.36 mmol of methane per gram of TOC. These results indicate that sorption on organic matter plays a critical role in shale-gas storage. Under the experimental conditions, differences in thermal maturity showed no significant effect on the total amount of gas sorbed. Experimental sorption isotherms could be fitted with good accuracy by the Langmuir function by adjusting the Langmuir pressure (PL) and maximum sorption capacity (Γmax). The lowest maturity sample (%Ro = 0.56) displayed a Langmuir pressure (PL) of 5.15 MPa, significantly larger than the 2.33 MPa observed for the highest maturity (%Ro > 2.01) sample at 50 °C. The value of the Langmuir pressure (PL) changes with kerogen type in the following sequence: type I > type II > type III. The thermodynamic parameters of CH4 adsorption on organic rich shales were determined based on the experimental CH4 isotherms. For the adsorption of CH4 on organic rich shales and their isolated kerogen, the heat of adsorption (q) and the standard entropy (Δs0) range from 7.3–28.0 kJ/mol and from −36.2 to −92.2 J/mol/K, respectively.

  15. 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems

    SciTech Connect

    Berk, Herbert L.; Breizman, Boris N.

    2014-02-21

    The 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems took place in Austin, Texas (7–11 September 2011). This meeting was organized jointly with the 5th IAEA Technical Meeting on Theory of Plasma Instabilities (5–7 September 2011). The two meetings shared one day (7 September 2011) with presentations relevant to both groups. Some of the work reported at these meetings was then published in a special issue of Nuclear Fusion [Nucl. Fusion 52 (2012)]. Summaries of the Energetic Particle Conference presentations were given by Kazuo Toi and Boris Breizman. They respectively discussed the experimental and theoretical progress presented at the meeting. Highlights of this meeting include the tremendous progress that has been achieved in the development of diagnostics that enables the ‘viewing’ of internal fluctuations and allows comparison with theoretical predictions, as demonstrated, for example, in the talks of P. Lauber and M. Osakabe. The need and development of hardened diagnostics in the severe radiation environment, such as those that will exist in ITER, was discussed in the talks of V. Kiptily and V.A. Kazakhov. In theoretical studies, much of the effort is focused on nonlinear phenomena. For example, detailed comparison of theory and experiment on D-III-D on the n = 0 geodesic mode was reported in separate papers by R. Nazikian and G. Fu. A large number of theoretical papers were presented on wave chirping including a paper by B.N. Breizman, which notes that wave chirping from a single frequency may emanate continuously once marginal stability conditions have been established. Another area of wide interest was the detailed study of alpha orbits in a burning plasma, where losses can come from symmetry breaking due to finite coil number or magnetic field imperfections introduced by diagnostic or test modules. An important area of development, covered by M.A. Hole and D.A. Spong, is concerned with the self

  16. 77 FR 66084 - Tenth Meeting: RTCA Special Committee 225, Rechargeable Lithium Battery and Battery Systems-Small...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-01

    ... and Battery Systems--Small and Medium Size AGENCY: Federal Aviation Administration (FAA), U.S... Lithium Battery and Battery Systems--Small and Medium Size. SUMMARY: The FAA is issuing this notice to... and Battery Systems--Small and Medium Size. DATES: The meeting will be held November 27-29, 2012,...

  17. 77 FR 56253 - Ninth Meeting: RTCA Special Committee 225, Rechargeable Lithium Battery and Battery Systems-Small...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-12

    ... and Battery Systems--Small and Medium Size AGENCY: Federal Aviation Administration (FAA), U.S... Lithium Battery and Battery Systems--Small and Medium Size. SUMMARY: The FAA is issuing this notice to... and Battery Systems--Small and Medium Size. DATES: The meeting will be held October 9-11, 2012, from...

  18. 78 FR 63454 - Response Systems to Adult Sexual Assault Crimes Panel; Notice of Federal Advisory Committee Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-24

    ... of the Secretary Response Systems to Adult Sexual Assault Crimes Panel; Notice of Federal Advisory... Response Systems to Adult Sexual Assault Crimes Panel. DATES: A meeting of the Response Systems to Adult Sexual Assault Crimes Panel (``the Panel'') will be held November 7-8, 2013. The Public Session...

  19. 75 FR 28852 - Ninth Meeting: Joint RTCA Special Committee 213: EUROCAE WG-79: Enhanced Flight Vision Systems...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-24

    ... Flight Vision Systems/Synthetic Vision Systems (EFVS/SVS) AGENCY: Federal Aviation Administration (FAA.../Synthetic Vision Systems (EFVS/SVS). SUMMARY: The FAA is issuing this notice to advise the public of a meeting of Joint RTCA Special Committee 213: EUROCAE WG-79: Enhanced Flight Vision...

  20. Proceedings of the Integrated Online Library Systems Meeting (9th, New York, May 11-12, 1994).

    ERIC Educational Resources Information Center

    Cibbarelli, Pamela R., Comp.; Nixon, Carol, Comp.

    Integrated Online Library Systems (IOLS) focuses exclusively on the issues of planning and managing automated systems in libraries and information centers. The theme of the 1994 IOLS annual meeting was "Coordinating Access to Multiple Systems," and 29 papers were selected for presentation that provide insight into the current technologies being…

  1. Woven Thermal Protection System (WTPS) a Novel Approach to Meet NASA's Most Demanding Reentry Missions

    NASA Technical Reports Server (NTRS)

    Stackpoole, Mairead

    2014-01-01

    NASA's future robotic missions to Venus and outer planets, namely, Saturn, Uranus, Neptune, result in extremely high entry conditions that exceed the capabilities of current mid-density ablators (PICA or Avcoat). Therefore mission planners assume the use of a fully dense carbon phenolic heat shield similar to what was flown on Pioneer Venus and Galileo. Carbon phenolic (CP) is a robust Thermal Protection System (TPS) however its high density and thermal conductivity constrain mission planners to steep entries, high heat fluxes, pressures and short entry durations, in order for CP to be feasible from a mass perspective. The high entry conditions pose certification challenges in existing ground based test facilities. In 2012 the Game Changing Development Program in NASA's Space Technology Mission Directorate funded NASA ARC to investigate the feasibility of a Woven Thermal Protection System (WTPS) to meet the needs of NASA's most challenging entry missions. This presentation will summarize maturation of the WTPS project.

  2. Proceedings of the 30th Annual Precise Time and Time Interval (PTTI) Systems and Applications Meeting

    NASA Technical Reports Server (NTRS)

    Breakiron, Lee A. (Editor)

    1999-01-01

    This document is a compilation of technical papers presented at the 30th Annual Precise Time and Time Interval (PTTI) Systems and Applications Meeting held 1-3 December 1998 at the Hyatt Regency Hotel at Reston Town Center, Reston, Virginia. Papers are in the following categories: 1) Recent developments in rubidium, cesium, and hydrogen-based atomic frequency standards, and in trapped-ion and space clock technology; 2) National and international applications of PTTI technology with emphasis on GPS and GLONASS timing, atomic time scales, and telecommunications; 3) Applications of PTTI technology to evolving military navigation and communication systems; geodesy; aviation; and pulsars; and 4) Dissemination of precise time and frequency by means of GPS, geosynchronous communication satellites, computer networks, WAAS, and LORAN.

  3. A biodegradable polymeric system for peptide–protein delivery assembled with porous microspheres and nanoparticles, using an adsorption/infiltration process

    PubMed Central

    Alcalá-Alcalá, Sergio; Urbán-Morlán, Zaida; Aguilar-Rosas, Irene; Quintanar-Guerrero, David

    2013-01-01

    A biodegradable polymeric system is proposed for formulating peptides and proteins. The systems were assembled through the adsorption of biodegradable polymeric nanoparticles onto porous, biodegradable microspheres by an adsorption/infiltration process with the use of an immersion method. The peptide drug is not involved in the manufacturing of the nanoparticles or in obtaining the microspheres; thus, contact with the organic solvent, interfaces, and shear forces required for the process are prevented during drug loading. Leuprolide acetate was used as the model peptide, and poly(d,l-lactide-co-glycolide) (PLGA) was used as the biodegradable polymer. Leuprolide was adsorbed onto different amounts of PLGA nanoparticles (25 mg/mL, 50 mg/mL, 75 mg/mL, and 100 mg/mL) in a first stage; then, these were infiltrated into porous PLGA microspheres (100 mg) by dipping the structures into a microsphere suspension. In this way, the leuprolide was adsorbed onto both surfaces (ie, nanoparticles and microspheres). Scanning electron microscopy studies revealed the formation of a nanoparticle film on the porous microsphere surface that becomes more continuous as the amount of infiltrated nanoparticles increases. The adsorption efficiency and release rate are dependent on the amount of adsorbed nanoparticles. As expected, a greater adsorption efficiency (~95%) and a slower release rate were seen (~20% of released leuprolide in 12 hours) when a larger amount of nanoparticles was adsorbed (100 mg/mL of nanoparticles). Leuprolide acetate begins to be released immediately when there are no infiltrated nanoparticles, and 90% of the peptide is released in the first 12 hours. In contrast, the systems assembled in this study released less than 44% of the loaded drug during the same period of time. The observed release profiles denoted a Fickian diffusion that fit Higuchi’s model (t1/2). The manufacturing process presented here may be useful as a potential alternative for formulating

  4. Location of MTBE and toluene in the channel system of the zeolite mordenite: Adsorption and host-guest interactions

    SciTech Connect

    Arletti, Rossella; Martucci, Annalisa; Alberti, Alberto; Pasti, Luisa; Nassi, Marianna; Bagatin, Roberto

    2012-10-15

    This paper reports a study of the location of Methyl Tertiary Butyl Ether (MTBE) and toluene molecules adsorbed in the pores of the organophylic zeolite mordenite from an aqueous solution. The presence of these organic molecules in the zeolite channels was revealed by structure refinement performed by the Rietveld method. About 3 molecules of MTBE and 3.6 molecules of toluene per unit cell were incorporated into the cavities of mordenite, representing 75% and 80% of the total absorption capacity of this zeolite. In both cases a water molecule was localized inside the side pocket of mordenite. The saturation capacity determined by the adsorption isotherms, obtained by batch experiments, and the weight loss given by thermogravimetric (TG) analyses were in very good agreement with these values. The interatomic distances obtained after the structural refinements suggest MTBE could be connected to the framework through a water molecule, while toluene could be bonded to framework oxygen atoms. The rapid and high adsorption of these hydrocarbons into the organophylic mordenite zeolite makes this cheap and environmental friendly material a suitable candidate for the removal of these pollutants from water. - graphical abstract: Location of MTBE (a) and toluene (b) in mordenite channels (projection along the [001] direction). Highlights: Black-Right-Pointing-Pointer We investigated the MTBE and toluene adsorption process into an organophilic zeolite mordenite. Black-Right-Pointing-Pointer The presence of MTBE and toluene in mordenite was determined by X-ray diffraction studies. Black-Right-Pointing-Pointer About 3 molecules of MTBE and 3.6 molecules of toluene per unit cell were incorporated into the zeolite cavities. Black-Right-Pointing-Pointer MTBE is connected to the framework through a water molecule. Black-Right-Pointing-Pointer Toluene is directly bonded to framework oxygen atoms.

  5. Meeting Temperature TMDL's Through the Development of an Ecosystem Marketplace Using a Systems Dynamics Approach

    NASA Astrophysics Data System (ADS)

    Lowry, T. S.; Tidwell, V. C.; Cardwell, H. E.; Ockner, G.; Rea, M. T.; Primozich, D.

    2006-12-01

    Water managers on the Willamette River in the state of Oregon are facing a new biological opinion and potentially strict TMDL regulations for temperature that will require actions by various stakeholders over the next few decades. Considerable public planning has already been accomplished in the basin with much of the assessment and planning phases for solving the basin's problems codified in a TMDL that was issued in 2006. Various alternatives have been proposed to meet the TMDL requirement, including operational changes at US Army Corps-operated reservoirs, projects that increase stream shading or restore the floodplain or hyporheic zone, and operational or technological changes at point sources such as waste water treatment plants and pulp and paper plants. To help meet the TMDL in a shorter time horizon, a collection of stakeholders formed the Willamette Partnership to develop an ecosystem marketplace where water quality and conservation credits can be traded. The marketplace will develop currencies in temperature and other environmental goods and services, and requires tools to describe linkages between credit trades, water operations, and other management changes (e.g. increases in stream shading) that control water temperature. These tools will link basin hydrology to temperature, water quality, and other concerns using a systems dynamics approach to provide real-time feedback to support conflict negotiation and decision making. Here, we present the development and conceptualization of those tools and their use in evaluating the potential and implementation of the ecosystem marketplace.

  6. 78 FR 55774 - Twenty Fourth Meeting: RTCA Special Committee 213, Enhanced Flight Vision Systems/Synthetic...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-11

    ... TRANSPORTATION Federal Aviation Administration Twenty Fourth Meeting: RTCA Special Committee 213, Enhanced Flight.... Department of Transportation (DOT). ACTION: Meeting notice of RTCA Special Committee 213, Enhanced Flight... public of the twenty fourth meeting of the RTCA Special Committee 213, Enhanced Flight Vision...

  7. When Workflow Management Systems and Logging Systems Meet: Analyzing Large-Scale Execution Traces

    SciTech Connect

    Gunter, Daniel

    2008-07-31

    This poster shows the benefits of integrating a workflow management system with logging and log mining capabilities. By combing two existing, mature technologies: Pegasus-WMS and Netlogger, we are able to efficiently process execution logs of earthquake science workflows consisting of hundreds of thousands to one million tasks. In particular we show results of processing logs of CyberShake, a workflow application running on the TeraGrid. Client-side tools allow scientists to quickly gather statistics about a workflow run and find out which tasks executed, where they were executed, what was their runtime, etc. These statistics can be used to understand the performance characteristics of a workflow and help tune the execution parameters of the workflow management system. This poster shows the scalability of the system presenting results of uploading task execution records into the system and by showing results of querying the system for overall workflow performance information.

  8. Location of MTBE and toluene in the channel system of the zeolite mordenite: Adsorption and host-guest interactions

    NASA Astrophysics Data System (ADS)

    Arletti, Rossella; Martucci, Annalisa; Alberti, Alberto; Pasti, Luisa; Nassi, Marianna; Bagatin, Roberto

    2012-10-01

    This paper reports a study of the location of Methyl Tertiary Butyl Ether (MTBE) and toluene molecules adsorbed in the pores of the organophylic zeolite mordenite from an aqueous solution. The presence of these organic molecules in the zeolite channels was revealed by structure refinement performed by the Rietveld method. About 3 molecules of MTBE and 3.6 molecules of toluene per unit cell were incorporated into the cavities of mordenite, representing 75% and 80% of the total absorption capacity of this zeolite. In both cases a water molecule was localized inside the side pocket of mordenite. The saturation capacity determined by the adsorption isotherms, obtained by batch experiments, and the weight loss given by thermogravimetric (TG) analyses were in very good agreement with these values. The interatomic distances obtained after the structural refinements suggest MTBE could be connected to the framework through a water molecule, while toluene could be bonded to framework oxygen atoms. The rapid and high adsorption of these hydrocarbons into the organophylic mordenite zeolite makes this cheap and environmental friendly material a suitable candidate for the removal of these pollutants from water.

  9. Meeting the Challenges of Exploration Systems: Health Management Technologies for Aerospace Systems With Emphasis on Propulsion

    NASA Technical Reports Server (NTRS)

    Melcher, Kevin J.; Sowers, T. Shane; Maul, William A.

    2005-01-01

    The constraints of future Exploration Missions will require unique Integrated System Health Management (ISHM) capabilities throughout the mission. An ambitious launch schedule, human-rating requirements, long quiescent periods, limited human access for repair or replacement, and long communication delays all require an ISHM system that can span distinct yet interdependent vehicle subsystems, anticipate failure states, provide autonomous remediation, and support the Exploration Mission from beginning to end. NASA Glenn Research Center has developed and applied health management system technologies to aerospace propulsion systems for almost two decades. Lessons learned from past activities help define the approach to proper ISHM development: sensor selection- identifies sensor sets required for accurate health assessment; data qualification and validation-ensures the integrity of measurement data from sensor to data system; fault detection and isolation-uses measurements in a component/subsystem context to detect faults and identify their point of origin; information fusion and diagnostic decision criteria-aligns data from similar and disparate sources in time and use that data to perform higher-level system diagnosis; and verification and validation-uses data, real or simulated, to provide variable exposure to the diagnostic system for faults that may only manifest themselves in actual implementation, as well as faults that are detectable via hardware testing. This presentation describes a framework for developing health management systems and highlights the health management research activities performed by the Controls and Dynamics Branch at the NASA Glenn Research Center. It illustrates how those activities contribute to the development of solutions for Integrated System Health Management.

  10. A vision for child health information systems: developing child health information systems to meet medical care and public health needs.

    PubMed

    Hinman, Alan R; Saarlas, Kristin N; Ross, David A

    2004-11-01

    In both the medical care and public health arenas, a variety of information systems have been developed to serve providers and program managers. In general, these systems have not been designed to share information with other information systems and provide comprehensive information about a child's health status to the information user. A number of initiatives are underway to develop integrated information systems. In December 2003, All Kids Count hosted an invitational conference "Developing Child Health Information Systems to Meet Medical Care and Public Health Needs." Through a series of plenary presentations and breakout discussion groups, participants developed a series of recommendations about governance, economic issues, information infrastructure, and uses of information from integrated child health information systems (CHIS). Common threads in the recommendations were: (1) development of a national coalition of stakeholders to promote integration of separate child health information systems within the context of ongoing national initiatives such as the National Health Information Infrastructure and the Public Health Information Network, (2) the need to develop the business and policy cases for integrated CHIS, (3) the need to develop agreement on standards for collecting and transferring information, and (4) the need to get the word out about the importance of integrating separate CHIS to improve health and health services.

  11. Woven Thermal Protection System (WTPS) a Novel Approach to Meet Nasa's Most Demanding Reentry Missions

    NASA Technical Reports Server (NTRS)

    Stackpoole, Margaret M.; Ellerby, Donald T.; Gasch, Matt; Ventkatapathy, Ethiraj; Beerman, Adam; Boghozian, Tane; Gonzales, Gregory; Feldman, Jay; Peterson, Keith; Prabhu, Dinesh

    2014-01-01

    NASA's future robotic missions to Venus and other planets, namely, Saturn, Uranus, Neptune, result in extremely high entry conditions that exceed the capabilities of current mid density ablators (PICA or Avcoat). Therefore mission planners assume the use of a fully dense carbon phenolic heatshield similar to what was flown on Pioneer Venus and Galileo. Carbon phenolic is a robust TPS, however, its high density and thermal conductivity constrain mission planners to steep entries, high fluxes, pressures and short entry durations, in order for CP to be feasible from a mass perspective. The high entry conditions pose certification challenges in existing ground based test facilities. In 2012 the Game Changing Development Program in NASA's Space Technology Mission Directorate funded NASA ARC to investigate the feasibility of a Woven Thermal Protection System to meet the needs of NASA's most challenging entry missions. This presentation will summarize the maturation of the WTPS project.

  12. 75 FR 56548 - Joint Meeting of the Peripheral and Central Nervous System Drugs Advisory Committee and the Drug...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-16

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration Joint Meeting of the Peripheral and Central Nervous System... the public. Name of Committees: Peripheral and Central Nervous System Drugs Advisory Committee and...

  13. A Spiral Step-by-Step Educational Method for Cultivating Competent Embedded System Engineers to Meet Industry Demands

    ERIC Educational Resources Information Center

    Jing,Lei; Cheng, Zixue; Wang, Junbo; Zhou, Yinghui

    2011-01-01

    Embedded system technologies are undergoing dramatic change. Competent embedded system engineers are becoming a scarce resource in the industry. Given this, universities should revise their specialist education to meet industry demands. In this paper, a spirally tight-coupled step-by-step educational method, based on an analysis of industry…

  14. Unexpected coupling between flow and adsorption in porous media.

    PubMed

    Vanson, Jean-Mathieu; Coudert, François-Xavier; Rotenberg, Benjamin; Levesque, Maximilien; Tardivat, Caroline; Klotz, Michaela; Boutin, Anne

    2015-08-14

    We study the interplay between transport and adsorption in porous systems under a fluid flow, based on a lattice Boltzmann scheme extended to account for adsorption. We performed simulations on well-controlled geometries with slit and grooved pores, investigating the influence of adsorption and flow on dispersion coefficient and adsorbed density. In particular, we present a counterintuitive effect where fluid flow induces heterogeneity in the adsorbate, displacing the adsorption equilibrium towards downstream adsorption sites in grooves. We also present an improvement of the adsorption-extended lattice Boltzmann scheme by introducing the possibility for saturating Langmuir-like adsorption, while earlier work focused on linear adsorption phenomena. We then highlight the impact of this change in situations of high concentration of adsorbate. PMID:26139013

  15. Studies of adsorption characteristics of activated carbons down to 4.5 K for the development of cryosorption pumps for fusion systems

    SciTech Connect

    Kasthurirengan, S.; Behera, U.; Vivek, G. A.; Krishnamoorthy, V.; Gangradey, R.; Udgata, S. S.; Tripati, V. S.

    2014-01-29

    Cryosorption pump is the only possible device to pump helium, hydrogen and its isotopes in fusion environment, such as high magnetic field and high plasma temperatures. Activated carbons are known to be the most suitable adsorbent in the development of cryosorption pumps. For this purpose, the data of adsorption characteristics of activated carbons in the temperature range 4.5 K to 77 K are needed, but are not available in the literature. For obtaining the above data, a commercial micro pore analyzer operating at 77 K has been integrated with a two stage GM cryocooler, which enables the cooling of the sample temperature down to 4.5 K. A heat switch mounted between the second stage cold head and the sample chamber helps to raise the sample chamber temperature to 77 K without affecting the performance of the cryocooler. The detailed description of this system is presented elsewhere. This paper presents the results of experimental studies of adsorption isotherms measured on different types of activated carbons in the form of granules, globules, flake knitted and non-woven types in the temperature range 4.5 K to 10 K using Helium gas as the adsorbate. The above results are analyzed to obtain the pore size distributions and surface areas of the activated carbons. The effect of adhesive used for bonding the activated carbons to the panels is also studied. These results will be useful to arrive at the right choice of activated carbon to be used for the development of cryosorption pumps.

  16. Studies of adsorption characteristics of activated carbons down to 4.5 K for the development of cryosorption pumps for fusion systems

    NASA Astrophysics Data System (ADS)

    Kasthurirengan, S.; Behera, U.; Vivek, G. A.; Krishnamoorthy, V.; Gangradey, R.; Udgata, S. S.; Tripati, V. S.

    2014-01-01

    Cryosorption pump is the only possible device to pump helium, hydrogen and its isotopes in fusion environment, such as high magnetic field and high plasma temperatures. Activated carbons are known to be the most suitable adsorbent in the development of cryosorption pumps. For this purpose, the data of adsorption characteristics of activated carbons in the temperature range 4.5 K to 77 K are needed, but are not available in the literature. For obtaining the above data, a commercial micro pore analyzer operating at 77 K has been integrated with a two stage GM cryocooler, which enables the cooling of the sample temperature down to 4.5 K. A heat switch mounted between the second stage cold head and the sample chamber helps to raise the sample chamber temperature to 77 K without affecting the performance of the cryocooler. The detailed description of this system is presented elsewhere. This paper presents the results of experimental studies of adsorption isotherms measured on different types of activated carbons in the form of granules, globules, flake knitted and non-woven types in the temperature range 4.5 K to 10 K using Helium gas as the adsorbate. The above results are analyzed to obtain the pore size distributions and surface areas of the activated carbons. The effect of adhesive used for bonding the activated carbons to the panels is also studied. These results will be useful to arrive at the right choice of activated carbon to be used for the development of cryosorption pumps.

  17. Reviewing the integration of patient data: how systems are evolving in practice to meet patient needs

    PubMed Central

    Cruz-Correia, Ricardo J; Vieira-Marques, Pedro M; Ferreira, Ana M; Almeida, Filipa C; Wyatt, Jeremy C; Costa-Pereira, Altamiro M

    2007-01-01

    Background The integration of Information Systems (IS) is essential to support shared care and to provide consistent care to individuals – patient-centred care. This paper identifies, appraises and summarises studies examining different approaches to integrate patient data from heterogeneous IS. Methods The literature was systematically reviewed between 1995–2005 to identify articles mentioning patient records, computers and data integration or sharing. Results Of 3124 articles, 84 were included describing 56 distinct projects. Most of the projects were on a regional scale. Integration was most commonly accomplished by messaging with pre-defined templates and middleware solutions. HL7 was the most widely used messaging standard. Direct database access and web services were the most common communication methods. The user interface for most systems was a Web browser. Regarding the type of medical data shared, 77% of projects integrated diagnosis and problems, 67% medical images and 65% lab results. More recently significantly more IS are extending to primary care and integrating referral letters. Conclusion It is clear that Information Systems are evolving to meet people's needs by implementing regional networks, allowing patient access and integration of ever more items of patient data. Many distinct technological solutions coexist to integrate patient data, using differing standards and data architectures which may difficult further interoperability. PMID:17565667

  18. Development of a Next-Generation Membrane-Integrated Adsorption Processor for CO2 Removal and Compression for Closed-Loop Air Revitalization Systems

    NASA Technical Reports Server (NTRS)

    Mulloth, Lila; LeVan, Douglas

    2002-01-01

    The current CO2 removal technology of NASA is very energy intensive and contains many non-optimized subsystems. This paper discusses the concept of a next-generation, membrane integrated, adsorption processor for CO2 removal nd compression in closed-loop air revitalization systems. This processor will use many times less power than NASA's current CO2 removal technology and will be capable of maintaining a lower CO2 concentration in the cabin than that can be achieved by the existing CO2 removal systems. The compact, consolidated, configuration of gas dryer, CO2 separator, and CO2 compressor will allow continuous recycling of humid air in the cabin and supply of compressed CO2 to the reduction unit for oxygen recovery. The device has potential application to the International Space Station and future, long duration, transit, and planetary missions.

  19. PDS4: Meeting Big Data Challenges Via a Model-Driven Planetary Science Data Architecture and System

    NASA Astrophysics Data System (ADS)

    Law, E.; Hughes, J. S.; Crichton, D. J.; Hardman, S. H.; Joyner, R.; Ramirez, P.

    2014-12-01

    Big science data management entails cataloging, processing, distribution, multiple ways of analyzing and interpreting the data, long-term preservation, and international cooperation of massive amount of scientific data. PDS4, the next generation of the Planetary Data System (PDS), uses an information model-driven architectural approach coupled with modern information technologies and standards to meet theses challenges of big science data management. PDS4 is an operational example of the use of an explicit data system architecture and an ontology-base information model to drive the development, operations, and evolution of a scalable data system along the entire science data lifecycle from ground systems to the archives. This overview of PDS4 will include a description of its model-driven approach and its overall systems architecture. It will illustrate how the system is being used to help meet the expectations of modern scientists for interoperable data systems and correlatable data in the Big Data era.

  20. Solvent vapor recovery by pressure swing adsorption. 3: Comparison of simulation with experiment for the butane-activated carbon system

    SciTech Connect

    Liu, J.; Holland, C.E.; Ritter, J.A.

    1999-06-01

    A fully predictive (no adjustable parameters), nonisothermal, multicomponent mathematical model was developed and used to simulate a pressure swing adsorption (PSA) process designed for the separation and recovery of concentrated butane vapor from nitrogen using BAX activated carbon. Nearly quantitative agreement with experiment was realized with this model over a wide range of process conditions, and for both the transient and periodic state process dynamics and the periodic state process performance. The model also verified some unique characteristics of this PSA process, and it revealed some of the subtleties associated with accurately simulating a PSA-solvent vapor recovery (SVR) process. These subtleties included the need to account for the adsorbate heat capacity and the temperature dependence of the gas-phase physical properties. No PSA models in the literature have included both of these features, which were critical to the accurate prediction of the heat effects in this PSA-SVR process.

  1. Evaluation of radon adsorption characteristics of a coconut shell-based activated charcoal system for radon and thoron removal applications.

    PubMed

    Karunakara, N; Sudeep Kumara, K; Yashodhara, I; Sahoo, B K; Gaware, J J; Sapra, B K; Mayya, Y S

    2015-04-01

    Radon ((222)Rn), thoron ((220)Rn), and their decay products contribute a major fraction (more than 50%) of doses received from ionisation radiation in public domain indoor environments and occupation environments such as uranium mines, thorium plants, and underground facilities, and are recognised as important radiological hazardous materials, which need to be controlled. This paper presents studies on the removal of (222)Rn and (220)Rn from air using coconut shell-based granular activated charcoal cylindrical adsorber beds. Experiments were conducted to evaluate the (222)Rn and (220)Rn adsorption characteristics, and the mitigation efficiency of coconut-based activated charcoal available in India. The performance parameters evaluated include breakthrough time (τ) and adsorption coefficient (K), and degassing characteristics of the charcoal bed of varying dimensions at different flow rates. While the breakthrough for (222)Rn occurred depending on the dimension of the adsorber bed and flow rates, for (220)Rn, the breakthrough did not occur. The breakthrough curve exhibited a stretched S-shape response, instead of the theoretically predicted sharp step function. The experiments confirm that the breakthrough time individually satisfies the quadratic relationship with respect to the diameter of the bed, and the linear relationship with respect to the length, as predicted in the theory. The K value varied in the range of 2.3-4.12 m(3) kg(-1) with a mean value of 2.99 m(3) kg(-1). The K value was found to increase with the increase in flow rate. Heating the charcoal to ∼ 100 °C resulted in degassing of the adsorbed (222)Rn, and the K of the degassed charcoal and virgin charcoal were found to be similar with no deterioration in performance indicating the re-usability of the charcoal.

  2. Evaluation of radon adsorption characteristics of a coconut shell-based activated charcoal system for radon and thoron removal applications.

    PubMed

    Karunakara, N; Sudeep Kumara, K; Yashodhara, I; Sahoo, B K; Gaware, J J; Sapra, B K; Mayya, Y S

    2015-04-01

    Radon ((222)Rn), thoron ((220)Rn), and their decay products contribute a major fraction (more than 50%) of doses received from ionisation radiation in public domain indoor environments and occupation environments such as uranium mines, thorium plants, and underground facilities, and are recognised as important radiological hazardous materials, which need to be controlled. This paper presents studies on the removal of (222)Rn and (220)Rn from air using coconut shell-based granular activated charcoal cylindrical adsorber beds. Experiments were conducted to evaluate the (222)Rn and (220)Rn adsorption characteristics, and the mitigation efficiency of coconut-based activated charcoal available in India. The performance parameters evaluated include breakthrough time (τ) and adsorption coefficient (K), and degassing characteristics of the charcoal bed of varying dimensions at different flow rates. While the breakthrough for (222)Rn occurred depending on the dimension of the adsorber bed and flow rates, for (220)Rn, the breakthrough did not occur. The breakthrough curve exhibited a stretched S-shape response, instead of the theoretically predicted sharp step function. The experiments confirm that the breakthrough time individually satisfies the quadratic relationship with respect to the diameter of the bed, and the linear relationship with respect to the length, as predicted in the theory. The K value varied in the range of 2.3-4.12 m(3) kg(-1) with a mean value of 2.99 m(3) kg(-1). The K value was found to increase with the increase in flow rate. Heating the charcoal to ∼ 100 °C resulted in degassing of the adsorbed (222)Rn, and the K of the degassed charcoal and virgin charcoal were found to be similar with no deterioration in performance indicating the re-usability of the charcoal. PMID:25658471

  3. Interfacial adsorption in ternary alloys

    SciTech Connect

    Huang, C.; Cruz, M.O. de la; Voorhees, P.W.

    1999-11-26

    Interfaces of A-B-C ternary alloys decomposed into two and three phases are studied. The effect of the gradient energy coefficients {bar {kappa}}{sub II}, I = A, B, C, on the interface composition profiles of ternary alloys is examined. The adsorption of component C in ternary alloys is obtained numerically by finding steady-state solutions of the nonlinear Cahn-Hilliard equations and by solving the two Euler-Lagrange equations resulting from minimizing the interfacial energy, and analytically near the critical point. It is found that the solutions from both numerical methods are identical for a two-phase system. In symmetric ternary systems (equal interaction energy between each pair of components) with a minority component C, the gradient energy coefficient of C, {bar {kappa}}{sub CC}, can have a very strong influence on the degree of adsorption. In the {alpha} and {beta} two-phase regions, where {alpha} and {beta} are the phases rich in the majority components A and B, respectively, as {bar {kappa}}{sub CC} increases, the adsorption of the minority component C in the {alpha} and {beta} interfaces decreases. Near a critical point, however, the degree of adsorption of minority component C is independent of the gradient energy coefficient.

  4. 75 FR 12540 - Farm Credit System Insurance Corporation Board; Regular Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-16

    ... accessibility to Board meetings, persons requiring assistance should make arrangements in advance. The matters... of Accountable Property Presentation of 2009 Audit Results Closed Sesson FCSIC Report on...

  5. Performance evaluation of a hybrid system for efficient palm oil mill effluent treatment via an air-cathode, tubular upflow microbial fuel cell coupled with a granular activated carbon adsorption.

    PubMed

    Tee, Pei-Fang; Abdullah, Mohammad Omar; Tan, Ivy Ai Wei; Mohamed Amin, Mohamed Afizal; Nolasco-Hipolito, Cirilo; Bujang, Kopli

    2016-09-01

    An air-cathode MFC-adsorption hybrid system, made from earthen pot was designed and tested for simultaneous wastewater treatment and energy recovery. Such design had demonstrated superior characteristics of low internal resistance (29.3Ω) and favor to low-cost, efficient wastewater treatment and power generation (55mW/m(3)) with average current of 2.13±0.4mA. The performance between MFC-adsorption hybrid system was compared to the standalone adsorption system and results had demonstrated great pollutants removals of the integrated system especially for chemical oxygen demand (COD), biochemical oxygen demand (BOD3), total organic carbon (TOC), total volatile solids (TVS), ammoniacal nitrogen (NH3-N) and total nitrogen (TN) because such system combines the advantages of each individual unit. Besides the typical biological and electrochemical processes that happened in an MFC system, an additional physicochemical process from the activated carbon took place simultaneously in the MFC-adsorption hybrid system which would further improved on the wastewater quality. PMID:27268432

  6. Performance evaluation of a hybrid system for efficient palm oil mill effluent treatment via an air-cathode, tubular upflow microbial fuel cell coupled with a granular activated carbon adsorption.

    PubMed

    Tee, Pei-Fang; Abdullah, Mohammad Omar; Tan, Ivy Ai Wei; Mohamed Amin, Mohamed Afizal; Nolasco-Hipolito, Cirilo; Bujang, Kopli

    2016-09-01

    An air-cathode MFC-adsorption hybrid system, made from earthen pot was designed and tested for simultaneous wastewater treatment and energy recovery. Such design had demonstrated superior characteristics of low internal resistance (29.3Ω) and favor to low-cost, efficient wastewater treatment and power generation (55mW/m(3)) with average current of 2.13±0.4mA. The performance between MFC-adsorption hybrid system was compared to the standalone adsorption system and results had demonstrated great pollutants removals of the integrated system especially for chemical oxygen demand (COD), biochemical oxygen demand (BOD3), total organic carbon (TOC), total volatile solids (TVS), ammoniacal nitrogen (NH3-N) and total nitrogen (TN) because such system combines the advantages of each individual unit. Besides the typical biological and electrochemical processes that happened in an MFC system, an additional physicochemical process from the activated carbon took place simultaneously in the MFC-adsorption hybrid system which would further improved on the wastewater quality.

  7. Method and apparatus for thermal swing adsorption and thermally-enhanced pressure swing adsorption

    DOEpatents

    Wegeng, Robert S.; Rassat, Scot D.; TeGrotenhuis, Ward E.; Drost, Kevin; Vishwanathan, Vilayanur V.

    2004-06-08

    The present invention provides compact adsorption systems that are capable of rapid temperature swings and rapid cycling. Novel methods of thermal swing adsorption and thermally-enhanced pressure swing adsorption are also described. In some aspects of the invention, a gas is passed through the adsorbent thus allowing heat exchangers to be very close to all portions of the adsorbent and utilize less space. In another aspect, the adsorption media is selectively heated, thus reducing energy costs. Methods and systems for gas adsorption/desorption having improved energy efficiency with capability of short cycle times are also described. In another aspect, the apparatus or methods utilize heat exchange channels of varying lengths that have volumes controlled to provide equal heat fluxes. Methods of fuel cell startup are also described. Advantages of the invention include the ability to use (typically) 30-100 times less adsorbent compared to conventional systems.

  8. Method for thermal swing adsorption and thermally-enhanced pressure swing adsorption

    DOEpatents

    Wegeng, Robert S.; Rassat, Scot D.; Stenkamp, Victoria S.; TeGrotenhuis, Ward E.; Matson, Dean W.; Drost, M. Kevin; Viswanathan, Vilayanur V.

    2003-10-07

    The present invention provides compact adsorption systems that are capable of rapid temperature swings and rapid cycling. Novel methods of thermal swing adsorption and thermally-enhanced pressure swing adsorption are also described. In some aspects of the invention, a gas is passed through the adsorbent thus allowing heat exchangers to be very close to all portions of the adsorbent and utilize less space. In another aspect, the adsorption media is selectively heated, thus reducing energy costs. Methods and systems for gas adsorption/desorption having improved energy efficiency with capability of short cycle times are also described. Advantages of the invention include the ability to use (typically) 30-100 times less adsorbent compared to conventional systems.

  9. Apparatus for thermal swing adsorption and thermally-enhanced pressure swing adsorption

    DOEpatents

    Wegeng, Robert S.; Rassat, Scot D.; Stenkamp, Victoria S.; TeGrotenhuis, Ward E.; Matson, Dean W.; Drost, M. Kevin; Viswanathan, Vilayanur V.

    2005-12-13

    The present invention provides compact adsorption systems that are capable of rapid temperature swings and rapid cycling. Novel methods of thermal swing adsorption and thermally-enhanced pressure swing adsorption are also described. In some aspects of the invention, a gas is passed through the adsorbent thus allowing heat exchangers to be very close to all portions of the adsorbent and utilize less space. In another aspect, the adsorption media is selectively heated, thus reducing energy costs. Methods and systems for gas adsorption/desorption having improved energy efficiency with capability of short cycle times are also described. Advantages of the invention include the ability to use (typically) 30-100 times less adsorbent compared to conventional systems.

  10. Proceedings of the coal-fired power systems 94: Advances in IGCC and PFBC review meeting. Volume 1

    SciTech Connect

    McDaniel, H.M.; Staubly, R.K.; Venkataraman, V.K.

    1994-06-01

    The Coal-Fired Power Systems 94 -- Advances in IGCC and PFBC Review Meeting was held June 21--23, 1994, at the Morgantown Energy Center (METC) in Morgantown, West Virginia. This Meeting was sponsored and hosted by METC, the Office of Fossil Energy, and the US Department of Energy (DOE). METC annually sponsors this conference for energy executives, engineers, scientists, and other interested parties to review the results of research and development projects; to discuss the status of advanced coal-fired power systems and future plans with the industrial contractors; and to discuss cooperative industrial-government research opportunities with METC`s in-house engineers and scientists. Presentations included industrial contractor and METC in-house technology developments related to the production of power via coal-fired Integrated Gasification Combined Cycle (IGCC) and Pressurized Fluidized Bed Combustion (PFBC) systems, the summary status of clean coal technologies, and developments and advancements in advanced technology subsystems, such as hot gas cleanup. A keynote speaker and other representatives from the electric power industry also gave their assessment of advanced power systems. This meeting contained 11 formal sessions and one poster session, and included 52 presentations and 24 poster presentations. Volume I contains papers presented at the following sessions: opening commentaries; changes in the market and technology drivers; advanced IGCC systems; advanced PFBC systems; advanced filter systems; desulfurization system; turbine systems; and poster session. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

  11. Spectrophotometric investigation of the interactions between cationic (C.I. Basic Blue 9) and anionic (C.I. Acid Blue 25) dyes in adsorption onto extracted cellulose from Posidonia oceanic in single and binary system.

    PubMed

    Ben Douissa, Najoua; Dridi-Dhaouadi, Sonia; Mhenni, Mohamed Farouk

    2016-01-01

    Extracted cellulose from Posidonia oceanica was used as an adsorbent for removal of a cationic (Basic blue 9, BB) and anionic textile dye (Acid blue 25, AB) from aqueous solution in single dye system. Characterization of the extracted cellulose and extracted cellulose-dye systems were performed using several techniques such as Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, zeta potential and Boehm acid-base titration method. Adsorption tests showed that the extracted cellulose presented higher adsorption of BB than AB in single dye system, revealing that electrostatic interactions are responsible, in the first instance, for the dye-adsorbent interaction. In single dye systems, the extracted cellulose presented the maximum adsorption capacities of BB and AB at 0.955 mmol.g(-1) and 0.370 mmol.g(-1), respectively. Adsorption experiments of AB dye on extracted cellulose saturated by BB dye exhibited the release of the latter dye from the sorbent which lead to dye-dye interaction in aqueous solution due to electrostatic attraction between both species. Interaction of BB and AB dyes were investigated using spectrophotometric analysis and results demonstrated the formation of a molecular complex detected at wavelengths 510 and 705 nm when anionic (AB) and cationic (BB) dye were taken in equimolar proportions. The adsorption isotherm of AB, taking into account the dye-dye interaction was investigated and showed that BB dye was released proportionately by AB equilibrium concentration. It was also observed that AB adsorption is widely enhanced when the formation of the molecular complex is disadvantaged.

  12. Spectrophotometric investigation of the interactions between cationic (C.I. Basic Blue 9) and anionic (C.I. Acid Blue 25) dyes in adsorption onto extracted cellulose from Posidonia oceanic in single and binary system.

    PubMed

    Ben Douissa, Najoua; Dridi-Dhaouadi, Sonia; Mhenni, Mohamed Farouk

    2016-01-01

    Extracted cellulose from Posidonia oceanica was used as an adsorbent for removal of a cationic (Basic blue 9, BB) and anionic textile dye (Acid blue 25, AB) from aqueous solution in single dye system. Characterization of the extracted cellulose and extracted cellulose-dye systems were performed using several techniques such as Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, zeta potential and Boehm acid-base titration method. Adsorption tests showed that the extracted cellulose presented higher adsorption of BB than AB in single dye system, revealing that electrostatic interactions are responsible, in the first instance, for the dye-adsorbent interaction. In single dye systems, the extracted cellulose presented the maximum adsorption capacities of BB and AB at 0.955 mmol.g(-1) and 0.370 mmol.g(-1), respectively. Adsorption experiments of AB dye on extracted cellulose saturated by BB dye exhibited the release of the latter dye from the sorbent which lead to dye-dye interaction in aqueous solution due to electrostatic attraction between both species. Interaction of BB and AB dyes were investigated using spectrophotometric analysis and results demonstrated the formation of a molecular complex detected at wavelengths 510 and 705 nm when anionic (AB) and cationic (BB) dye were taken in equimolar proportions. The adsorption isotherm of AB, taking into account the dye-dye interaction was investigated and showed that BB dye was released proportionately by AB equilibrium concentration. It was also observed that AB adsorption is widely enhanced when the formation of the molecular complex is disadvantaged. PMID:27148723

  13. 77 FR 59416 - Meeting of the National Park System Advisory Board; November 28-29, 2012

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-27

    ... the Federal Advisory Committee Act, 5 U.S.C. Appendix, and Parts 62 and 65 of title 36 of the Code of... attend the board meeting and upon request may address the Board concerning an area's national... Area, Fremont County, CO (boundary expansion). The board meeting will be open to the public. The...

  14. 77 FR 35384 - Farm Credit System Insurance Corporation Board; Regular Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-13

    ... Insurance Corporation Board (Board). Date and Time: The meeting of the Board will be held at the offices of the Farm Credit Administration in McLean, Virginia, on June 14, 2012, from 1:00 p.m. until such time... requiring assistance should make arrangements in advance. The matters to be considered at the meeting...

  15. 76 FR 20668 - Farm Credit System Insurance Corporation Board; Regular Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-13

    ... Insurance Corporation Board (Board). Date and Time: The meeting of the Board will be held at the offices of the Farm Credit Administration in McLean, Virginia, on April 14, 2011, from 1 p.m. until such time as... requiring assistance should make arrangements in advance. The matters to be considered at the meeting...

  16. 77 FR 24178 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-23

    ... conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer@bis.doc.gov , no later than May 1... presentation materials or comments be forwarded before the meeting to Ms. Springer. The Assistant Secretary for... portions of the meeting will be open to the public. For more information, call Yvette Springer at (202)...

  17. 78 FR 42753 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-17

    ... join the conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer@bis.doc.gov , no later... public presentation materials or comments be forwarded before the meeting to Ms. Springer. The Assistant... remaining portions of the meeting will be open to the public. For more information, call Yvette Springer...

  18. 75 FR 39919 - Information Systems, Technical Advisory Committee; Notice of Partially Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-13

    ... join the conference, submit inquiries to Ms. Yvette Springer at Yspringer@bis.doc.gov , no later than... public presentation materials or comments be forwarded before the meeting to Ms. Springer. The Assistant... portions of the meeting will be open to the public. For more information, call Yvette Springer at (202)...

  19. 75 FR 75681 - Peripheral and Central Nervous System Drugs Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-06

    ...) aggregates in the brain to help rule out Alzheimer's disease. On January 21, 2011, the committee will discuss... on FDA's regulatory issues. Date and Time: The meeting will be held on January 20, 2011, from 8 a.m... Meetings''. Please note that visitors to the White Oak Campus must have a valid driver's license or...

  20. Experimental Determination of P-V-T-X Properties and Adsorption Kinetics in the CO2-CH4 System under Shale Gas Reservoir Conditions

    NASA Astrophysics Data System (ADS)

    Xiong, Y.; Wang, Y.

    2014-12-01

    Shale gas production via hydrofracturing has profoundly changed the energy portfolio in the USA and other parts of the world. Under the shale gas reservior conditions, CO2 and H2O, either in residence or being injected during hydrofracturing or both, co-exist with CH4. One important feature characteristic of shale is the presence of nanometer-scale (1-100 nm) pores in shale or mudstone. The interactions among CH4, CO2 and H2O in those nano-sized pores directly impact shale gas storage and gas release from the shale matrix. Therefore, a fundamental understanding of interactions among CH4, CO2 and H2O in nanopore confinement would provide guidance in addressing a number of problems such as rapid decline in production after a few years and low recovery rates. We are systematically investigating the P-V-T-X properties and adsorption kinetics in the CH4-CO2-H2O system under the reservior conditions. We have designed and constructed a unique high temperature and pressure experimental system that can measure both of the P-V-T-X properties and adsorption kinetics sequentially. We measure the P-V-T-X properties of CH4-CO2 mixtures with CH4 up to 95 vol. %, and adsorption kinetics of various materials, under the conditions relevant to shale gas reservoir. We use three types of materials: (I) model materials, (II) single solid phases separated from shale samples, and (III) crushed shale samples from both the known shale gas producing formations and the shale gas barren formations. The model materials are well characterized in terms of pore sizes. Therefore, the results associated with the model material serve as benchmarks for our model development. Sandia National Laboratories is a multi-program laboratory operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. This research is supported by a Geoscience Foundation LDRD.

  1. Separation of clavulanic acid from fermented broth of amino acids by an aqueous two-phase system and ion-exchange adsorption.

    PubMed

    da Silva, Clovis Sacardo; Cuel, Maressa Fabiano; Barreto, Verônica Orlandin; Kwong, Wu Hong; Hokka, Carlos O; Barboza, M

    2012-02-15

    The clavulanic acid is a substance which inhibits the β-lactamases used with penicillins for therapeutic treatment. After the fermentation, by-products of low molecular weight such as amino acids lysine, histidine, proline and tyrosine are present in the fermented broth. To remove these impurities the techniques of extraction by an aqueous two-phase system of 17% polyethylene glycol molecular weight 600 and 15% potassium phosphate were used for a partial purification. A subsequent ion-exchange adsorption was used for the recuperation of the clavulanic acid of the top phase and purification getting a concentration factor of 2 and purification of 100% in relation to the amino acids lysine, histidine, proline and tyrosine.

  2. Society for Neuro-Oncology 2014 annual meeting updates on central nervous system metastases

    PubMed Central

    Lukas, Rimas V.; Mehta, Minesh P.; Lesniak, Maciej S.

    2015-01-01

    Introduction The 19th Annual Meeting of the Society for Neuro-Oncology (SNO) took place in November of 2014. The focus of many abstracts, as well as the Education Day, was on recent advances in the study of central nervous system (CNS) metastases. Tumor Biology Key studies evaluating the factors in tumors and their microenvironment associated with the development and growth of brain metastases are reviewed. Prognostication Studies investigating the factors that independently influence survival in participants with brain metastases are presented. Response Assessment The Response Assessment for Neuro-Oncology criteria for brain metastases (RANO-BM) and the Neurological Assessment in Neuro-Oncology (NANO) criteria, which were both presented, are recapped. Radiotherapy Studies are reviewed evaluating factors that influence survival outcomes in participants with brain metastases who were treated with radiotherapy. Studies investigating the potential risk of radiation necrosis with the combination of radiotherapy and immunotherapies are presented. Systemic Therapies Brain metastases-focused subset analyses from the ASCEND-1 trial for ALK-translocated non–small cell lung cancer are presented. Preclinical and clinical work on solid tumor leptomeningeal carcinomatosis is also covered. Sequelae of Central Nervous System Metastases and Their Treatments An overview is provided of treatment- related toxicities as well as important concepts that may influence strategies to protect against these toxicities. Conclusions Key concepts regarding tumor biology, prognostication, response assessment, therapeutic management, and sequelae of treatment for CNS metastases are summarized. Advances in our understanding of the basic and clinical science of CNS metastases have the potential to improve outcomes for patients.

  3. Society for Neuro-Oncology 2014 annual meeting updates on central nervous system metastases

    PubMed Central

    Lukas, Rimas V.; Mehta, Minesh P.; Lesniak, Maciej S.

    2015-01-01

    Introduction The 19th Annual Meeting of the Society for Neuro-Oncology (SNO) took place in November of 2014. The focus of many abstracts, as well as the Education Day, was on recent advances in the study of central nervous system (CNS) metastases. Tumor Biology Key studies evaluating the factors in tumors and their microenvironment associated with the development and growth of brain metastases are reviewed. Prognostication Studies investigating the factors that independently influence survival in participants with brain metastases are presented. Response Assessment The Response Assessment for Neuro-Oncology criteria for brain metastases (RANO-BM) and the Neurological Assessment in Neuro-Oncology (NANO) criteria, which were both presented, are recapped. Radiotherapy Studies are reviewed evaluating factors that influence survival outcomes in participants with brain metastases who were treated with radiotherapy. Studies investigating the potential risk of radiation necrosis with the combination of radiotherapy and immunotherapies are presented. Systemic Therapies Brain metastases-focused subset analyses from the ASCEND-1 trial for ALK-translocated non–small cell lung cancer are presented. Preclinical and clinical work on solid tumor leptomeningeal carcinomatosis is also covered. Sequelae of Central Nervous System Metastases and Their Treatments An overview is provided of treatment- related toxicities as well as important concepts that may influence strategies to protect against these toxicities. Conclusions Key concepts regarding tumor biology, prognostication, response assessment, therapeutic management, and sequelae of treatment for CNS metastases are summarized. Advances in our understanding of the basic and clinical science of CNS metastases have the potential to improve outcomes for patients. PMID:27621837

  4. PREFACE: WMO/GEO Expert Meeting On An International Sand And Dust Storm Warning System

    NASA Astrophysics Data System (ADS)

    Pérez, C.; Baldasano, J. M.

    2009-03-01

    This volume of IOP Conference Series: Earth and Environmental Science presents a selection of papers that were given at the WMO/GEO Expert Meeting on an International Sand and Dust Storm Warning System hosted by the Barcelona Supercomputing Center - Centro Nacional de Supercomputación in Barcelona (Spain) on 7-9 November 2007 (http://www.bsc.es/wmo). A sand and dust storm (SDS) is a meteorological phenomenon common in arid and semi-arid regions and arises when a gust front passes or when the wind force exceeds the threshold value where loose sand and dust are removed from the dry surface. After aeolian uptake, SDS reduce visibility to a few meters in and near source regions, and dust plumes are transported over distances as long as thousands of kilometres. Aeolian dust is unique among aerosol phenomena: (1) with the possible exception of sea-salt aerosol, it is globally the most abundant of all aerosol species, (2) it appears as the dominating component of atmospheric aerosol over large areas of the Earth, (3) it represents a serious hazard for life, health, property, environment and economy (occasionally reaching the grade of disaster or catastrophic event) and (4) its influence, impacts, complex interactions and feedbacks within the Earth System span a wide range of spatial and temporal scales. From a political and societal point of view, the concern for SDS and the need for international cooperation were reflected after a survey conducted in 2005 by the World Meteorological Organization (WMO) in which more than forty WMO Member countries expressed their interest for creating or improving capacities for SDS warning advisory and assessment. In this context, recent major advances in research - including, for example, the development and implementation of advanced observing systems, the theoretical understanding of the mechanisms responsible for sand and dust storm generation and the development of global and regional dust models - represent the basis for

  5. MODELING COMPETITIVE ADSORPTION IN UREA-SCR CATALYSTS FOR EFFECTIVE LOW TEMPERATURE NOX CONTROL

    SciTech Connect

    Devarakonda, Maruthi N.; Tonkyn, Russell G.; Tran, Diana N.; Lee, Jong H.; Herling, Darrell R.

    2010-09-17

    Although the SCR technology exhibits higher NOx reduction efficiency over a wider range of temperatures among the lean NOx reduction technologies, further improvement in low-temperature performance is required to meet the future emission standards and to lower the system cost. In order to improve the catalyst technologies and optimize the system performance, it is critical to understand the reaction mechanisms and catalyst behaviors with respect to operating conditions. For example, it is well known that the ammonia coverage on catalyst surface is critical for NOx reduction efficiency. However, the level of ammonia storage is influenced by competitive adsorption by other species, such as H2O and NO2. Moreover, hydrocarbon species that slip through the upstream DOC during the cold-start period can also inhibit the SCR performance, especially at low temperatures. Therefore, a one-dimensional detailed kinetic model that can account for the effects of such competitive adsorption has been developed based on steady state surface isotherm tests on a commercial Fe-zeolite catalyst. The model is developed as a C language S-function and implemented in Matlab/Simulink environment. Rate kinetics of adsorption and desorption of each of the adsorbents are determined from individual adsorption tests and validated for a set of test conditions that had all the adsorbents in the feed gas.

  6. Adsorption of thorium(IV) from simulated radioactive solutions using a novel electrospun PVA/TiO2/ZnO nanofiber adsorbent functionalized with mercapto groups: Study in single and multi-component systems

    NASA Astrophysics Data System (ADS)

    Alipour, Dariush; Keshtkar, Ali Reza; Moosavian, Mohammad Ali

    2016-03-01

    The novel polyvinyl alcohol/titanium oxide/zinc oxide (PVA/TiO2/ZnO) nanofiber adsorbent functionalized with 3-mercaptopropyltrimethoxysilane (TMPTMS) was prepared by electrospinning method and its potential was investigated for the adsorption of thorium from single and multi-metal aqueous solutions. The prepared adsorbent was characterized by FTIR, SEM and BET analysis. The influences of different operational parameters such as pH, ionic strength, equilibrium time, initial concentration and temperature were studied in batch mode. Investigation of ionic strength effect showed that the addition of NaNO3 to metal solution has a slight effect on the thorium adsorption, whereas pH value has a serious effect on the thorium adsorption at pH values lower than 4. The double-exponential model described the adsorption of Th(IV) ions much better than other kinetic models within both the single and multi-component systems. Among various isotherm models used, the equilibrium data of Th(IV) conformed the Langmuir isotherm in the single system, while those were best fitted by Dubinin-Radushkevich (D-R) isotherm in multi-component system. Thermodynamic parameters such as ΔH°, ΔS°, and ΔG° indicated that the nature of adsorption process was spontaneous, endothermic and thermodynamically favored. The inhibitory effect of other metal ions on the adsorption capacity of Th(IV) was in order of Al(III) > Cu(II) > Cd(II) > Ni(II) > U(VI) > Fe(II).

  7. Thermodynamics of binary gas adsorption in nanopores.

    PubMed

    Dutta, Sujeet; Lefort, Ronan; Morineau, Denis; Mhanna, Ramona; Merdrignac-Conanec, Odile; Saint-Jalmes, Arnaud; Leclercq, Théo

    2016-09-21

    MCM-41 nanoporous silicas show a very high selectivity for monoalcohols over aprotic molecules during adsorption of a binary mixture in the gas phase. We present here an original use of gravimetric vapour sorption isotherms to characterize the role played by the alcohol hydrogen-bonding network in the adsorption process. Beyond simple selectivity, vapour sorption isotherms measured for various compositions help to completely unravel at the molecular level the step by step adsorption mechanism of the binary system in the nanoporous solid, from the first monolayers to the complete liquid condensation. PMID:27532892

  8. The 32nd JANNAF Combustion Subcommittee and 1995 Propulsion Systems Hazards Subcommittee Meeting. Volume 1; Joint Sessions

    NASA Technical Reports Server (NTRS)

    Fry, Ronald S. (Editor); Cocchiaro, James E. (Editor); Gannaway, Mary T. (Editor)

    1995-01-01

    This volume, the first of two volumes, is a collection of 18 unclassified/unlimited papers which were presented at the 32nd Joint Army-Navy-NASA-Air Force (JANNAF) Combustion Subcommittee Meeting in conjunction with the Propulsion Systems Hazards Subcommittee, the 22nd Exhaust Plume Technology Subcommittee, the 4th SPIRITS User Group Meeting and the Pennsylvania State University 7th Propulsion Engineering Research Center (PERC) Symposium held 23-27 October 1995 at the NASA Marshall Space Flight Center, Huntsville, AL. The JANNAF papers contained in this volume reviewed solid propellant thermal decomposition, combustion of nitramine ingredients and ignition/combustion of new energetic ingredients and nitramine propellants.

  9. Strong adsorption of phosphate by amorphous zirconium oxide nanoparticles.

    PubMed

    Su, Yu; Cui, Hang; Li, Qi; Gao, Shian; Shang, Jian Ku

    2013-09-15

    Phosphate removal is important in the control of eutrophication of water bodies. Adsorption is one of the promising approaches for the removal of phosphate, which could serve as a supplement for the biological phosphate removal process commonly used in the wastewater treatment industry to meet the discharge requirement when the biological performance is deteriorated from changes of operation conditions. Amorphous zirconium oxide nanoparticles were synthesized by a simple and low-cost hydrothermal process, and their phosphate removal performance was explored in aqueous environment under various conditions. A fast adsorption of phosphate was observed in the kinetics study, and their adsorption capacity was determined at about 99.01 mg/g at pH 6.2 in the equilibrium adsorption isotherm study. Commonly coexisting anions showed no or minimum effect on their phosphate adsorption performance. The phosphate adsorption showed little pH dependence in the range from pH 2 to 6, while it decreased sharply with the pH increase above pH 7. After adsorption, phosphate on these am-ZrO2 nanoparticles could be easily desorbed by NaOH solution washing. Both the macroscopic and microscopic techniques demonstrated that the phosphate adsorption mechanism of am-ZrO2 nanoparticles followed the inner-sphere complexing mechanism, and the surface hydroxyl groups played a key role in the phosphate adsorption.

  10. A Simple Adsorption Experiment

    ERIC Educational Resources Information Center

    Guirado, Gonzalo; Ayllon, Jose A.

    2011-01-01

    The study of adsorption phenomenon is one of the most relevant and traditional physical chemistry experiments performed by chemistry undergraduate students in laboratory courses. In this article, we describe an easy, inexpensive, and straightforward way to experimentally determine adsorption isotherms using pieces of filter paper as the adsorbent…

  11. Study of the operation and maintenance of computer systems to meet the requirements of 10 CFR 73. 55

    SciTech Connect

    Lewis, J.R.; Byers, K.R.; Fluckiger, J.D.; McBride, K.C.

    1986-01-01

    The Pacific Northwest Laboratory has studied the operation and maintenance of computer-managed systems that can help nuclear power plant licensees to meet the physical security requirements of 10 CFR 73.55 (for access control, alarm monitoring, and alarm recording). This report of that study describes a computer system quality assurance program that is based on a system of related internal controls. A discussion of computer system evaluation includes verification and validation mechanisms for assuring that requirements are stated and that the product fulfills these requirements. Finally, the report describes operator and security awareness training and a computer system preventive maintenance program. 24 refs.

  12. Adaption of the Magnetometer Towed Array geophysical system to meet Department of Energy needs for hazardous waste site characterization

    SciTech Connect

    Cochran, J.R.; McDonald, J.R.; Russell, R.J.; Robertson, R.; Hensel, E.

    1995-10-01

    This report documents US Department of Energy (DOE)-funded activities that have adapted the US Navy`s Surface Towed Ordnance Locator System (STOLS) to meet DOE needs for a ``... better, faster, safer and cheaper ...`` system for characterizing inactive hazardous waste sites. These activities were undertaken by Sandia National Laboratories (Sandia), the Naval Research Laboratory, Geo-Centers Inc., New Mexico State University and others under the title of the Magnetometer Towed Array (MTA).

  13. 78 FR 64048 - Intelligent Transportation Systems Program Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-25

    .... The following is a summary of the meeting tentative agenda: (1) Welcome and Introductions, (2) Safety... CFR part 102-3) covering management of Federal advisory committees. Issued in Washington, DC, on...

  14. 77 FR 56254 - Twentieth Meeting: RTCA Special Committee 213, Enhanced Flight Vision Systems/Synthetic Vision...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-12

    ..., Basel, Switzerland, +41 58 158 4958 (Phone), +41 58 158 4988 (Fax), Web Site: www.jetcraft.com . FOR... , telephone (319) 295-5233 or mobile at (319) 431-7154, to register for the meeting. SUPPLEMENTARY...

  15. 77 FR 58209 - Fourth Meeting: RTCA Special Committee 226, Audio Systems and Equipment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-19

    ... requirement to the vibration test variable nature of Oxygen Mask Microphone and Hand Microphone performance in... requirement to combine with the vibration test Other Business Establish agenda for next meeting...

  16. 77 FR 37733 - Third Meeting: RTCA Special Committee 226, Audio Systems and Equipment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-22

    ... CVR manufacturers. Addition of noise test requirement to the vibration test variable nature of Oxygen... combine with the vibration test. Other Business. Establish agenda for next meeting. Adjourn. Attendance...

  17. 76 FR 59769 - Meeting of the Marine Transportation System National Advisory Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-27

    ... October 12-13, 2011 to assess its priorities for the coming year, and to discuss other issues of... registered to speak. Copies of oral comments must be submitted in writing at the meeting. Additional...

  18. 78 FR 73859 - Farm Credit System Insurance Corporation Board; Regular Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-09

    ... meeting of the Board will be held at the offices of the Farm Credit Administration in McLean, Virginia, on... Drive, McLean, Virginia 22102. Submit attendance requests via email to VisitorRequest@FCA.gov ....

  19. Adaptive neuro-fuzzy inference system model for adsorption of 1,3,4-thiadiazole-2,5-dithiol onto gold nanoparticales-activated carbon

    NASA Astrophysics Data System (ADS)

    Ghaedi, M.; Hosaininia, R.; Ghaedi, A. M.; Vafaei, A.; Taghizadeh, F.

    2014-10-01

    In this research, a novel adsorbent gold nanoparticle loaded on activated carbon (Au-NP-AC) was synthesized by ultrasound energy as a low cost routing protocol. Subsequently, this novel material characterization and identification followed by different techniques such as scanning electron microscope (SEM), Brunauer-Emmett-Teller (BET) and transmission electron microscopy (TEM) analysis. Unique properties such as high BET surface area (>1229.55 m2/g) and low pore size (<22.46 Å) and average particle size lower than 48.8 Å in addition to high reactive atoms and the presence of various functional groups make it possible for efficient removal of 1,3,4-thiadiazole-2,5-dithiol (TDDT). Generally, the influence of variables, including the amount of adsorbent, initial pollutant concentration, contact time on pollutants removal percentage has great effect on the removal percentage that their influence was optimized. The optimum parameters for adsorption of 1,3,4-thiadiazole-2, 5-dithiol onto gold nanoparticales-activated carbon were 0.02 g adsorbent mass, 10 mg L-1 initial 1,3,4-thiadiazole-2,5-dithiol concentration, 30 min contact time and pH 7. The Adaptive neuro-fuzzy inference system (ANFIS), and multiple linear regression (MLR) models, have been applied for prediction of removal of 1,3,4-thiadiazole-2,5-dithiol using gold nanoparticales-activated carbon (Au-NP-AC) in a batch study. The input data are included adsorbent dosage (g), contact time (min) and pollutant concentration (mg/l). The coefficient of determination (R2) and mean squared error (MSE) for the training data set of optimal ANFIS model were achieved to be 0.9951 and 0.00017, respectively. These results show that ANFIS model is capable of predicting adsorption of 1,3,4-thiadiazole-2,5-dithiol using Au-NP-AC with high accuracy in an easy, rapid and cost effective way.

  20. Adaptive neuro-fuzzy inference system model for adsorption of 1,3,4-thiadiazole-2,5-dithiol onto gold nanoparticales-activated carbon.

    PubMed

    Ghaedi, M; Hosaininia, R; Ghaedi, A M; Vafaei, A; Taghizadeh, F

    2014-10-15

    In this research, a novel adsorbent gold nanoparticle loaded on activated carbon (Au-NP-AC) was synthesized by ultrasound energy as a low cost routing protocol. Subsequently, this novel material characterization and identification followed by different techniques such as scanning electron microscope(SEM), Brunauer-Emmett-Teller(BET) and transmission electron microscopy (TEM) analysis. Unique properties such as high BET surface area (>1229.55m(2)/g) and low pore size (<22.46Å) and average particle size lower than 48.8Å in addition to high reactive atoms and the presence of various functional groups make it possible for efficient removal of 1,3,4-thiadiazole-2,5-dithiol (TDDT). Generally, the influence of variables, including the amount of adsorbent, initial pollutant concentration, contact time on pollutants removal percentage has great effect on the removal percentage that their influence was optimized. The optimum parameters for adsorption of 1,3,4-thiadiazole-2, 5-dithiol onto gold nanoparticales-activated carbon were 0.02g adsorbent mass, 10mgL(-1) initial 1,3,4-thiadiazole-2,5-dithiol concentration, 30min contact time and pH 7. The Adaptive neuro-fuzzy inference system (ANFIS), and multiple linear regression (MLR) models, have been applied for prediction of removal of 1,3,4-thiadiazole-2,5-dithiol using gold nanoparticales-activated carbon (Au-NP-AC) in a batch study. The input data are included adsorbent dosage (g), contact time (min) and pollutant concentration (mg/l). The coefficient of determination (R(2)) and mean squared error (MSE) for the training data set of optimal ANFIS model were achieved to be 0.9951 and 0.00017, respectively. These results show that ANFIS model is capable of predicting adsorption of 1,3,4-thiadiazole-2,5-dithiol using Au-NP-AC with high accuracy in an easy, rapid and cost effective way. PMID:24858196

  1. PREFACE: 4th National Meeting in Chaos, Complex System and Time Series

    NASA Astrophysics Data System (ADS)

    Raúl Hernández Montoya, Alejandro; Hernández Lemus, Enrique; Rubén Luévano Enríquez, José; Rodríguez Achach, Manuel Enrique; Vargas Madrazo, Carlos Ernesto

    2013-12-01

    The fourth edition of the National Meeting on Chaos, Complex Systems and Time Series (NMCCSTS4), or in Spanish 4a. Reunión Nacional de Caos, Sistemas Complejos y Series de Tiempo, was held from 29 November to 2 December 2011 in the University of Veracruz (Universidad Veracruzana), Campus Xalapa, at Xalapa Veracruz, México, in the beautiful House of the Lake (Casa del Lago), a late XIX century former textile factory situated in the edge of an also ancient former dam, currently a park containing three small lakes, very emblematic of Xalapa, City, the capital of the state of Veracruz, México. The previous editions of this meeting, were held in Mérida (2006), Pachuca (2008) and Puebla (2009). A clear uptrend is observed in the number of participants in this academic event from all Universities of México and abroad, going from about 15 participants in the first meeting to more than 90 in the last one. On this occasion, about 90 participants from three countries attended our event, where 29 papers (10 master lectures from top recognized national and international leaders in the fields of complexity, and 19 invited papers), one course for students and 42 posters were presented. A look at the scientific program of the NMCCSTS4, allows us to appreciate the wide range of topics and recent advances that were covered during our event; topics and recent results in the areas of biology, econophysics, sociophysics, genomics and bioinformatics, complex networks, thermodynamics, etc, were presented and discussed rigorously in a friendly, dynamical and informal atmosphere. Also, on this occasion, we celebrated Professor Miguel Angel Jiménez Montaño, for his very distinguished academic career throughout more that 50 years and as a founding member of the Faculty of Physics and AI of University of Veracruz. Prizes were awarded for the best poster presentations. The winner was Porfirio Toledo, from Faculty of Mathematics, University of Veracruz (Game theory to characterize

  2. PREFACE: 4th National Meeting in Chaos, Complex System and Time Series

    NASA Astrophysics Data System (ADS)

    Raúl Hernández Montoya, Alejandro; Hernández Lemus, Enrique; Rubén Luévano Enríquez, José; Rodríguez Achach, Manuel Enrique; Vargas Madrazo, Carlos Ernesto

    2013-12-01

    The fourth edition of the National Meeting on Chaos, Complex Systems and Time Series (NMCCSTS4), or in Spanish 4a. Reunión Nacional de Caos, Sistemas Complejos y Series de Tiempo, was held from 29 November to 2 December 2011 in the University of Veracruz (Universidad Veracruzana), Campus Xalapa, at Xalapa Veracruz, México, in the beautiful House of the Lake (Casa del Lago), a late XIX century former textile factory situated in the edge of an also ancient former dam, currently a park containing three small lakes, very emblematic of Xalapa, City, the capital of the state of Veracruz, México. The previous editions of this meeting, were held in Mérida (2006), Pachuca (2008) and Puebla (2009). A clear uptrend is observed in the number of participants in this academic event from all Universities of México and abroad, going from about 15 participants in the first meeting to more than 90 in the last one. On this occasion, about 90 participants from three countries attended our event, where 29 papers (10 master lectures from top recognized national and international leaders in the fields of complexity, and 19 invited papers), one course for students and 42 posters were presented. A look at the scientific program of the NMCCSTS4, allows us to appreciate the wide range of topics and recent advances that were covered during our event; topics and recent results in the areas of biology, econophysics, sociophysics, genomics and bioinformatics, complex networks, thermodynamics, etc, were presented and discussed rigorously in a friendly, dynamical and informal atmosphere. Also, on this occasion, we celebrated Professor Miguel Angel Jiménez Montaño, for his very distinguished academic career throughout more that 50 years and as a founding member of the Faculty of Physics and AI of University of Veracruz. Prizes were awarded for the best poster presentations. The winner was Porfirio Toledo, from Faculty of Mathematics, University of Veracruz (Game theory to characterize

  3. 40 CFR 62.15225 - What must I do if my continuous emission monitoring system is temporarily unavailable to meet the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... unavailable to meet the data collection requirements? Refer to table 8 of this subpart. It shows alternate methods for collecting data when these systems malfunction or when repairs, calibration checks, or zero... emission monitoring system is temporarily unavailable to meet the data collection requirements?...

  4. 40 CFR 62.15225 - What must I do if my continuous emission monitoring system is temporarily unavailable to meet the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... unavailable to meet the data collection requirements? Refer to table 8 of this subpart. It shows alternate methods for collecting data when these systems malfunction or when repairs, calibration checks, or zero... emission monitoring system is temporarily unavailable to meet the data collection requirements?...

  5. GENERAL: Cluster Growth Through Monomer Adsorption Processes

    NASA Astrophysics Data System (ADS)

    Ke, Jian-Hong; Lin, Zhen-Quan; Chen, Xiao-Shuang

    2010-02-01

    We propose a monomer adsorption model, in which only the monomers are allowed to diffuse and adsorb onto other clusters. By means of the generalized rate equation we investigate the kinetic behavior of the system with a special rate kernel. For the system without monomer input, the concentration aj(t) of the Aj clusters (j > 1) asymptotically retains a nonzero quantity, while for the system with monomer input, it decays with time and vanishes finally. We also investigate the kinetics of an interesting model with fixed-rate monomer adsorption. For the case without monomer source, the evolution of the system will halt at a finite time; while the system evolves infinitely in time in the case with monomer source. Finally, we also suggest a connection between the fixed-rate monomer adsorption systems and growing networks.

  6. Design of advanced fibrous based material systems to meet the critical challenges in water quality and carbon dioxide mitigation

    NASA Astrophysics Data System (ADS)

    Nangmenyi, Gordon

    Water purification and global warming mitigation represent two of the major challenges in the 21st century. The research presented in this dissertation will describe the development of advanced fibrous systems that exhibit excellent performance in addressing the issues of water disinfection, carbon dioxide capture, and natural organic matter (NOM) removal from water. Total eradication of E. coli was achieved with fiberglass impregnated with either silver (FG-Ag), iron oxide (Fe2O3 ) modified with Ag (FG-F2O3/Ag) or copper oxide (CuO) modified with Ag (FG-CuO/Ag). The Ag modified oligodynamic nanoparticle impregnated fiberglass displayed excellent kinetic inactivation performance with extended capacity at a much lower amount of nanoparticle loading. The results support their immediate applicability in the field from a utility and cost perspective. The polyethyleneimine coated glass fibers (PEFA) for CO2 removal displayed high capacity for CO2 adsorption, up to 440 mg-CO 2/g while providing a mechanically durable and recyclable system for CO2 capture. The system offers the potential for CO2 utilization from the adsorbed CO2 from a power plant or closed environment (submarine, space shuttles or control rooms). Aminated polyacrylonitrile activated carbon fibers (N-ACF) coated on a non-woven fiberglass mat, displayed the ability to remove NOM more efficiently than granulated activated carbon or ion exchange beads at concentrations below 50 mg/L. Electrostatic attraction was found to be the dominant mechanism of NOM adsorption for the N-ACF.

  7. Phase 1 Methyl Iodide Deep-Bed Adsorption Tests

    SciTech Connect

    Nick Soelberg; Tony Watson

    2014-08-01

    Nuclear fission results in the production of fission products (FPs) and activation products including iodine-129, which could evolve into used fuel reprocessing facility off-gas systems, and could require off-gas control to limit air emissions to levels within acceptable emission limits. Research, demonstrations, and some reprocessing plant experience have indicated that diatomic iodine can be captured with efficiencies high enough to meet regulatory requirements. Research on the capture of organic iodides has also been performed, but to a lesser extent [Jubin 2012b]. Several questions remain open regarding the capture of iodine bound in organic compounds. Deep-bed methyl iodide adsorption testing has progressed according to a multi-laboratory methyl iodide adsorption test plan. This report summarizes the first phase of methyl iodide adsorption work performed according to this test plan using the deep-bed iodine adsorption test system at the Idaho National Laboratory (INL), performed during Fiscal Year (FY) 2013 and early FY-2014. Testing has been performed to address questions posed in the test plan, and followed the testing outline in the test plan. Tests established detection limits, developed procedures for sample analysis with minimal analytical interferences, and confirmed earlier results that show that the methyl iodide reacts when in contact with the AgZ sorbent, and not significantly in the gas flow upstream of the sorbent. The reaction(s) enable separation of the iodine from the organic moiety, so that the iodine can chemisorb onto the sorbent. The organic moiety can form other compounds, some of which are organic compounds that are detected and can be tentatively identified using GC-FID and GCMS. Test results also show that other gas constituents (NOx and/or H2O) can affect the methyl iodide reactions. With NOx and H2O present in the gas stream, the majority of uncaptured iodine exiting iodine-laden sorbent beds is in the form of I2 or HI, species that

  8. Adsorption of nisin and pediocin on nanoclays.

    PubMed

    Meira, Stela Maris Meister; Jardim, Arthur Izé; Brandelli, Adriano

    2015-12-01

    Three different nanoclays (bentonite, octadecylamine-modified montmorillonite and halloysite) were studied as potential carriers for the antimicrobial peptides nisin and pediocin. Adsorption occurred from peptide solutions in contact with nanoclays at room temperature. Higher adsorption of nisin and pediocin was obtained on bentonite. The antimicrobial activity of the resultant bacteriocin-nanoclay systems was analyzed using skimmed milk agar as food simulant and the largest inhibition zones were observed against Gram-positive bacteria for halloysite samples. Bacteriocins were intercalated into the interlayer space of montmorillonites as deduced from the increase of the basal spacing measured by X-ray diffraction (XRD) assay. Infrared spectroscopy suggested non-electrostatic interactions, such as hydrogen bonding between siloxane groups from clays and peptide molecules. Transmission electron microscopy did not show any alteration in morphologies after adsorption of antimicrobial peptides on bentonite and halloysite. These results indicate that nanoclays, especially halloysite, are suitable nanocarriers for nisin and pediocin adsorption.

  9. Adsorption of nisin and pediocin on nanoclays.

    PubMed

    Meira, Stela Maris Meister; Jardim, Arthur Izé; Brandelli, Adriano

    2015-12-01

    Three different nanoclays (bentonite, octadecylamine-modified montmorillonite and halloysite) were studied as potential carriers for the antimicrobial peptides nisin and pediocin. Adsorption occurred from peptide solutions in contact with nanoclays at room temperature. Higher adsorption of nisin and pediocin was obtained on bentonite. The antimicrobial activity of the resultant bacteriocin-nanoclay systems was analyzed using skimmed milk agar as food simulant and the largest inhibition zones were observed against Gram-positive bacteria for halloysite samples. Bacteriocins were intercalated into the interlayer space of montmorillonites as deduced from the increase of the basal spacing measured by X-ray diffraction (XRD) assay. Infrared spectroscopy suggested non-electrostatic interactions, such as hydrogen bonding between siloxane groups from clays and peptide molecules. Transmission electron microscopy did not show any alteration in morphologies after adsorption of antimicrobial peptides on bentonite and halloysite. These results indicate that nanoclays, especially halloysite, are suitable nanocarriers for nisin and pediocin adsorption. PMID:26041178

  10. Proceedings of the coal-fired power systems 94: Advances in IGCC and PFBC review meeting. Volume 2

    SciTech Connect

    McDaniel, H.M.; Staubly, R.K.; Venkataraman, V.K.

    1994-06-01

    The Coal-Fired Power Systems 94 -- Advances in IGCC and PFBC Review Meeting was held June 21--23, 1994, at the Morgantown Energy Center (METC) in Morgantown, West Virginia. This Meeting was sponsored and hosted by METC, the Office of Fossil Energy, and the US Department of Energy (DOE). METC annually sponsors this conference for energy executives, engineers, scientists, and other interested parties to review the results of research and development projects; to discuss the status of advanced coal-fired power systems and future plans with the industrial contractors; and to discuss cooperative industrial-government research opportunities with METC`s in-house engineers and scientists. Presentations included industrial contractor and METC in-house technology developments related to the production of power via coal-fired Integrated Gasification Combined Cycle (IGCC) and Pressurized Fluidized Bed Combustion (PFBC) systems, the summary status of clean coal technologies, and developments and advancements in advanced technology subsystems, such as hot gas cleanup. A keynote speaker and other representatives from the electric power industry also gave their assessment of advanced power systems. This meeting contained 11 formal sessions and one poster session, and included 52 presentations and 24 poster presentations. Volume II contains papers presented at the following sessions: filter technology issues; hazardous air pollutants; sorbents and solid wastes; and membranes. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

  11. Highly carbonylated cellulose nanofibrous membranes utilizing maleic anhydride grafting for efficient lysozyme adsorption.

    PubMed

    Ma, Juncheng; Wang, Xueqin; Fu, Qiuxia; Si, Yang; Yu, Jianyong; Ding, Bin

    2015-07-22

    Construction of adsorptive materials for simple, efficient, and high-throughput adsorption of proteins is critical to meet the great demands of highly purified proteins in biotechnological and biopharmaceutical industry; however, it has proven extremely challenging. Here, we report a cost-effective strategy to create carbonyl groups surface-functionalized nanofibrous membranes under mild conditions for positively charged protein adsorption. Our approach allows maleic anhydride to in situ graft on cellulose nanofibrous membranes (CMA) to construct adsorptive membranes with large surface area and tortuous porous structure. Thereby, the resultant CMA membranes exhibited high adsorption capacity of 160 mg g(-1), fast equilibrium within 12 h, and good reversibility to lysozyme. Moreover, the dynamic adsorption was performed under low pressure-drops (750 Pa), with a relatively high saturation adsorption amount of 118 mg g(-1), which matched well with the requirements for proteins purification. Considering the excellent adsorption performance of the as-prepared adsorptive membranes, this simple and intriguing approach may pave a way for the design and development of robust and cost-effective adsorption membranes to meet the great demands for fast and efficient adsorption of positively charged proteins.

  12. Hybrid adsorptive membrane reactor

    NASA Technical Reports Server (NTRS)

    Tsotsis, Theodore T. (Inventor); Sahimi, Muhammad (Inventor); Fayyaz-Najafi, Babak (Inventor); Harale, Aadesh (Inventor); Park, Byoung-Gi (Inventor); Liu, Paul K. T. (Inventor)

    2011-01-01

    A hybrid adsorbent-membrane reactor in which the chemical reaction, membrane separation, and product adsorption are coupled. Also disclosed are a dual-reactor apparatus and a process using the reactor or the apparatus.

  13. Hybrid adsorptive membrane reactor

    DOEpatents

    Tsotsis, Theodore T.; Sahimi, Muhammad; Fayyaz-Najafi, Babak; Harale, Aadesh; Park, Byoung-Gi; Liu, Paul K. T.

    2011-03-01

    A hybrid adsorbent-membrane reactor in which the chemical reaction, membrane separation, and product adsorption are coupled. Also disclosed are a dual-reactor apparatus and a process using the reactor or the apparatus.

  14. Studies with an immobilized metal affinity chromatography cassette system involving binuclear triazacyclononane-derived ligands: automation of batch adsorption measurements with tagged recombinant proteins.

    PubMed

    Petzold, Martin; Coghlan, Campbell J; Hearn, Milton T W

    2014-07-18

    This study describes the determination of the adsorption isotherms and binding kinetics of tagged recombinant proteins using a recently developed IMAC cassette system and employing automated robotic liquid handling procedures for IMAC resin screening. These results confirm that these new IMAC resins, generated from a variety of different metal-charged binuclear 1,4,7-triaza-cyclononane (tacn) ligands, interact with recombinant proteins containing a novel N-terminal metal binding tag, NT1A, with static binding capacities similar to those obtained with conventional hexa-His tagged proteins, but with significantly increased association constants. In addition, higher kinetic binding rates were observed with these new IMAC systems, an attribute that can be positively exploited to increase process productivity. The results from this investigation demonstrate that enhancements in binding capacities and affinities were achieved with these new IMAC resins and chosen NT1A tagged protein. Further, differences in the binding performances of the bis(tacn) xylenyl-bridged ligands were consistent with the distance between the metal binding centres of the two tacn moieties, the flexibility of the ligand and the potential contribution from the aromatic ring of the xylenyl group to undergo π/π stacking interactions with the tagged proteins.

  15. [Characteristic of ammonia nitrogen adsorption on karst underground river sediments].

    PubMed

    Guo, Fang; Chen, Kun-Kun; Jiang, Guang-Hui

    2011-02-01

    Karst aquifers are one of the most important aquifers in Southwestern China. One of the characteristics of karst aquifers is the enhanced permeability permits high flow velocities are capable of transporting suspended and bedload sediments. Mobile sediment in karst may act as a vector for the transport of contaminates. 14 sediment samples were collected from two underground rivers in two typical karst areas in Liuzhou city, Guangxi Autonomous Region, China. According to simulated experiment methods, characteristic of adsorption of ammonia nitrogen on sediment was studied. The results of ammonia nitrogen adsorption dynamics on sediments showed that the maximum adsorption velocity was less than 2 h. The adsorption balance quantity in 5 h accounted for 71% - 98% of the maximum adsorption quantity. The maximum adsorption quantity of ammonia nitrogen was 385.5 mg/kg, which was sediment from a cave in the middle areas of Guancun underground river system. The study of isotherm adsorption indicated adsorption quantity of NH4+ increase followed by incremental balance concentration of NH4+ in the aquatic phase. Adsorption quantity of ammonia nitrogen in sediments has a relative linear relationship with adsorption balance concentrations. Adsorption-desorption balance concentrations were all low, indicating sediments from underground rivers have great adsorption potential. Under the condition of low and high concentrations of ammonia nitrogen in overlying water, Langmuir and Tempkin couldn't simulate or simulate results couldn't reach remarkable level, whilst Linear and Freundlich models could simulate well. Research on different type sediments, sampling times and depths from two underground rivers shows characteristic of ammonia nitrogen adsorption on karst underground river sediments doesn't have good correspondence with the type of sediments. One of the reasons is there is no big difference between sediments in the development of climate, geology, hydrological conditions

  16. 40 CFR 63.11930 - What requirements must I meet for closed vent systems?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... accordance with Method 21 at 40 CFR part 60, appendix A-7, except as otherwise specified in this section. (ii... performance criteria of Method 21 at 40 CFR part 60, appendix A-7, except the instrument response factor... the plant site that will meet the performance criteria of Method 21 at 40 CFR part 60, appendix...

  17. 78 FR 20106 - Farm Credit System Insurance Corporation Board; Regular Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-03

    ... Insurance Corporation Board (Board). DATES: Date and Time: The meeting of the Board will be held at the... such time as the Board concludes its business. FOR FURTHER INFORMATION CONTACT: Dale L. Aultman..., persons requiring assistance should make arrangements in advance. The matters to be considered at...

  18. 77 FR 6857 - Pipeline Safety: Notice of Public Meetings on Improving Pipeline Leak Detection System...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-09

    ... sponsoring these public meetings to further study how to encourage operators to expand the use of leak... remote control and automatic control valves can be installed to lessen the volume of natural gas and... Capabilities and Research 12:30 p.m. Lunch 1:30 p.m. Panel 3: Considerations for Natural Gas Pipeline...

  19. Small High Schools Curricula: Alternative Delivery Systems for Meeting Essential Elements.

    ERIC Educational Resources Information Center

    Barker, Bruce; Logan, Suzanne

    The option for small high schools to consider non-traditional approaches to instruction may be a viable way to meet the instructional needs of individual students in Texas' rural communities and comply with the curriculum requirements specified in Chapter 75 (recently passed by the 67th Texas Legislature). Effective in 1985, school districts will…

  20. 75 FR 1339 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-11

    ... Ms. Yvette Springer at Yspringer@bis.doc.gov , no later than January 20, 2010. A limited number of... comments be forwarded before the meeting to Ms. Springer. The Assistant Secretary for Administration, with... to the public. For more information, call Yvette Springer at (202) 482-2813. Dated: January 6,...

  1. 78 FR 1198 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-08

    ... join the conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer(@bis.doc.gov, no later..., Citizenship, Organization name, Organization address, Email, and Phone to Ms. Springer. To the extent time... comments be forwarded before the meeting to Ms. Springer. The Assistant Secretary for Administration,...

  2. 77 FR 37652 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-22

    .... Yvette Springer at Yvette.Springer@bis.doc.gov , no later than July 19, 2012. A limited number of seats... comments be forwarded before the meeting to Ms. Springer. The Assistant Secretary for Administration, with... will be open to the public. For more information, call Yvette Springer at (202) 482-2813. Dated:...

  3. 78 FR 63162 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-23

    ... first come, first serve basis. To join the conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer@bis.doc.gov , no later than October 30, 2013. A limited number of seats will be available for the... meeting to Ms. Springer. The Assistant Secretary for Administration, with the concurrence of the...

  4. Expert Meeting on Information Systems in Culture Proceedings (Zagreb, Yugoslavia, September 2-4, 1990).

    ERIC Educational Resources Information Center

    Institute for Development and International Relations, Zagreb (Yugoslavia).

    This report presents the proceedings from a meeting jointly organized by United Nations Educational, Scientific, and Cultural Organization (UNESCO) and the Yugoslavian Institute for Development and International Relations (IRMO). Experts from 14 institutions and organizations from 7 countries of Africa, Europe, and North America participated in 4…

  5. The Role of "Meeting Pupil Needs and Empowering Staff" in Quality Management System

    ERIC Educational Resources Information Center

    Cheng, Alison Lai Fong; Yau, Hon Keung

    2012-01-01

    The study aims to examine the effectiveness of the implementation of "Meeting Pupil Needs and Empowering Staff" in the quality management in Hong Kong primary schools. A case study of nine primary schools was conducted and a qualitative method of interviews was adopted in this study. A total of 9 principals and 9 teachers from 9 primary…

  6. CRYOGENIC ADSORPTION OF HYDROGEN ISOTOPES OVER NANO-STRUCTURED MATERIALS

    SciTech Connect

    Xiao, S.; Heung, L.

    2010-10-07

    Porous materials such as zeolites, activated carbon, silica gels, alumina and a number of industrial catalysts are compared and ranked for hydrogen and deuterium adsorption at liquid nitrogen temperature. All samples show higher D{sub 2} adsorption than that of H{sub 2}, in which a HY sample has the greatest isotopic effect while 13X has the highest hydrogen uptake capacity. Material's moisture content has significant impact to its hydrogen uptake. A material without adequate drying could result in complete loss of its adsorption capacity. Even though some materials present higher H{sub 2} adsorption capacity at full pressure, their adsorption at low vapor pressure may not be as good as others. Adsorption capacity in a dynamic system is much less than in a static system. A sharp desorption is also expected in case of temperature upset.

  7. Adsorption properties of the nanozirconia/anionic polyacrylamide system-Effects of surfactant presence, solution pH and polymer carboxyl groups content

    NASA Astrophysics Data System (ADS)

    Wiśniewska, Małgorzata; Chibowski, Stanisław; Urban, Teresa

    2016-05-01

    The adsorption mechanism of anionic polyacrylamide (PAM) on the nanozirconia surface was examined. The effects of solution pH, carboxyl groups content in macromolecules and anionic surfactant (sodium dodecyl sulfate-SDS) addition were determined. The more probable structure of polymer adsorption layer was characterized based on the data obtained from spectrophotometry, viscosimetry and potentiometric titration methods. The adsorbed amount of polymer, size of macromolecules in the solution and surface charge density of ZrO2 particles in the absence and presence of PAM were assessed, respectively. Analysis of these results indicated that the increase of solution pH and content of carboxyl groups in the polymeric chains lead to more expanded conformations of adsorbing macromolecules. As a result, the adsorption of anionic polyacrylamide decreased. The SDS presence caused the significant increase of PAM adsorbed amount at pH 3, whereas at pH 6 and 9 the surfactant addition resulted in reduction of polymer adsorption level.

  8. Protein adsorption onto ceramic surfaces.

    PubMed

    Takami, Y; Yamane, S; Makinouchi, K; Otsuka, G; Glueck, J; Benkowski, R; Nosé, Y

    1998-04-01

    Ceramics seldom have been used as blood-contacting materials. However, alumina ceramic (Al2O3) and polyethylene are incorporated into the pivot bearings of the Gyro centrifugal blood pump. This material combination was chosen based on the high durability of the materials. Due to the stagnant flow that often occurs in a continuous flow condition inside a centrifugal pump, pivot bearing system is extremely critical. To evaluate the thombogenicity of pivot bearings in the Gyro pump, this study sought to investigate protein adsorption, particularly albumin, IgG, fibrinogen, and fibronectin onto ceramic surfaces. Al2O3 and silicon carbide ceramic (SiC) were compared with polyethylene (PE) and polyvinylchloride (PVC). Bicinchoninic acid (BCA) protein assay revealed that the amount of adsorbed proteins onto Al2O3 and SiC was significantly less than that on PVC. The sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) indicated that numerous proteins adsorbed onto PVC compared to PE, Al2O3, and SiC. Identification of adsorbed proteins by Western immunoblotting revealed that the adsorption of albumin was similar on all four materials tested. Western immunoblotting also indicated lesser amounts of IgG, fibrinogen, and fibronectin on Al2O3 and SiC than on PE and PVC. In conclusion, ceramics (Al2O3 and SiC) are expected to be thromboresistant from the viewpoint of protein adsorption. PMID:9511095

  9. Laboratory study on the adsorption of Mn(2+) on suspended and deposited amorphous Al(OH)(3) in drinking water distribution systems.

    PubMed

    Wang, Wendong; Zhang, Xiaoni; Wang, Hongping; Wang, Xiaochang; Zhou, Lichuan; Liu, Rui; Liang, Yuting

    2012-09-01

    Manganese (II) is commonly present in drinking water. This paper mainly focuses on the adsorption of manganese on suspended and deposited amorphous Al(OH)(3) solids. The effects of water flow rate and water quality parameters, including solution pH and the concentrations of Mn(2+), humic acid, and co-existing cations on adsorption were investigated. It was found that chemical adsorption mainly took place in drinking water with pHs above 7.5; suspended Al(OH)(3) showed strong adsorption capacity for Mn(2+). When the total Mn(2+) input was 3 mg/L, 1.0 g solid could accumulate approximately 24.0 mg of Mn(2+) at 15 °C. In drinking water with pHs below 7.5, because of H(+) inhibition, active reaction sites on amorphous Al(OH)(3) surface were much less. The adsorption of Mn(2+) on Al(OH)(3) changed gradually from chemical coordination to physical adsorption. In drinking water with high concentrations of Ca(2+), Mg(2+), Fe(3+), and HA, the removal of Mn(2+) was enhanced due to the effects of co-precipitation and adsorption. In solution with 1.0 mg/L HA, the residual concentration of Mn(2+) was below 0.005 mg/L, much lower than the limit value required by the Chinese Standard for Drinking Water Quality. Unlike suspended Al(OH)(3), deposited Al(OH)(3) had a much lower adsorption capacity of 0.85 mg/g, and the variation in flow rate and major water quality parameters had little effect on it. Improved managements of water age, pipe flushing and mechanical cleaning were suggested to control residual Mn(2+).

  10. 78 FR 38009 - Meetings

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-25

    ... ] Public Comment, Open Topics All meetings are accessible to persons with disabilities. An assistive listening system, Communication Access Realtime Translation (CART), and sign language interpreters will...

  11. Innovative Delivery Systems to Meet School Staffing Needs. Proceedings of the Annual Meeting of the National Association of State Directors of Teacher Education and Certification (53rd, Williamsburg, VA, June 23-25, 1981).

    ERIC Educational Resources Information Center

    Mackey, Charles C., Jr., Ed.

    Presentations delivered at the 1981 annual meeting of the National Association of State Directors of Teacher Education and Certification are presented in this publication. The papers consist of: (1) an edited transcript of a discussion on "Innovative Delivery Systems" (W. Robert Houston, Dwight Allen, and Fred Wood); (2) "Delivery Systems in a…

  12. A comparison of three adsorption equations and sensitivity study of parameter uncertainty effects on adsorption refrigeration thermal performance estimation

    NASA Astrophysics Data System (ADS)

    Zhao, Yongling; Hu, Eric; Blazewicz, Antoni

    2012-02-01

    This paper presents isosteric-based adsorption equilibrium tests of three activated carbon samples with methanol as an adsorbate. Experimental data was fitted into Langmuir equation, Freundlich equation and Dubinin-Astakov (D-A) equation, respectively. The fitted adsorption equations were compared in terms of agreement with experimental data. Moreover, equation format's impacts on calculation of the coefficient of performance (COP) and refrigeration capacity of an adsorption refrigeration system was analyzed. In addition, the sensitivity of each parameter in each adsorption equation format to the estimation of cycle's COP and refrigeration capacity was investigated. It was found that the D-A equation is the best form for presenting the adsorptive property of a carbon-methanol working pair. The D-A equation is recommended for estimating thermal performance of an adsorption refrigeration system because simulation results obtained using the D-A equation are less sensitive to errors of experimentally determined D-A equation's parameters.

  13. Systems Biology Approaches to Dissecting Plant Cell Wall Biosynthesis Genes in Poplus (JGI Seventh Annual User Meeting 2012: Genomics of Energy and Environment)

    SciTech Connect

    Glass, N Louise

    2012-03-22

    N. Louise Glass from the University of California, Berkeley, presents a talk titled "Systems Biology Approaches to Dissecting Plant Cell Wall Biosynthesis Genes in Poplus" at the JGI 7th Annual Users Meeting: Genomics of Energy & Environment Meeting on March 22, 2012 in Walnut Creek, California.

  14. 40 CFR 62.15225 - What must I do if my continuous emission monitoring system is temporarily unavailable to meet the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 8 2010-07-01 2010-07-01 false What must I do if my continuous emission monitoring system is temporarily unavailable to meet the data collection requirements? 62.15225... unavailable to meet the data collection requirements? Refer to table 8 of this subpart. It shows...

  15. Systems Biology Approaches to Dissecting Plant Cell Wall Biosynthesis Genes in Poplus (JGI Seventh Annual User Meeting 2012: Genomics of Energy and Environment)

    ScienceCinema

    Glass, N Louise [UC Berkeley

    2016-07-12

    N. Louise Glass from the University of California, Berkeley, presents a talk titled "Systems Biology Approaches to Dissecting Plant Cell Wall Biosynthesis Genes in Poplus" at the JGI 7th Annual Users Meeting: Genomics of Energy & Environment Meeting on March 22, 2012 in Walnut Creek, California.

  16. Long-Duration Testing of a Temperature-Swing Adsorption Compressor for Carbon Dioxide for Closed-Loop Air Revitalization Systems

    NASA Technical Reports Server (NTRS)

    Rosen, Micha; Mulloth, Lila; Varghese, Mini

    2005-01-01

    This paper describes the results of long-duration testing of a temperature-swing adsorption compressor that has application in the International Space Station (ISS) and future spacecraft for closing the air revitalization loop. The air revitalization system of the ISS operates in an open loop mode and relies on the resupply of oxygen and other consumables from Earth for the life support of astronauts. A compressor is required for delivering the carbon dioxide from a removal assembly to a reduction unit to recover oxygen and thereby closing the air-loop. The TSAC is a solid-state compressor that has the capability to remove CO2 from a low-pressure source, and subsequently store, compress, and deliver at a higher pressure as required by a processor. The TSAC is an ideal interface device for CO2 removal and reduction units in the air revitalization loop of a spacecraft for oxygen recovery. The TSAC was developed and its operation was successfully verified in integration tests with the flight-like Carbon Dioxide Removal Assembly (CDRA) at Marshall Space Flight Center prior to the long-duration tests. Long-duration tests reveal the impacts of repeated thermal cycling on the compressor components and the adsorbent material.

  17. Redesigning healthcare systems to meet the health challenges associated with climate change in the twenty-first century.

    PubMed

    Phua, Kai-Lit

    2015-01-01

    In the twenty-first century, climate change is emerging as a significant threat to the health and well-being of the public through links to the following: extreme weather events, sea level rise, temperature-related illnesses, air pollution patterns, water security, food security, vector-borne infectious diseases, and mental health effects (as a result of extreme weather events and climate change-induced population displacement). This article discusses how national healthcare systems can be redesigned through changes in its components such as human resources, facilities and technology, health information system, and health policy to meet these challenges. PMID:26150369

  18. Redesigning healthcare systems to meet the health challenges associated with climate change in the twenty-first century.

    PubMed

    Phua, Kai-Lit

    2015-01-01

    In the twenty-first century, climate change is emerging as a significant threat to the health and well-being of the public through links to the following: extreme weather events, sea level rise, temperature-related illnesses, air pollution patterns, water security, food security, vector-borne infectious diseases, and mental health effects (as a result of extreme weather events and climate change-induced population displacement). This article discusses how national healthcare systems can be redesigned through changes in its components such as human resources, facilities and technology, health information system, and health policy to meet these challenges.

  19. PREFACE: WMO/GEO Expert Meeting On An International Sand And Dust Storm Warning System

    NASA Astrophysics Data System (ADS)

    Pérez, C.; Baldasano, J. M.

    2009-03-01

    This volume of IOP Conference Series: Earth and Environmental Science presents a selection of papers that were given at the WMO/GEO Expert Meeting on an International Sand and Dust Storm Warning System hosted by the Barcelona Supercomputing Center - Centro Nacional de Supercomputación in Barcelona (Spain) on 7-9 November 2007 (http://www.bsc.es/wmo). A sand and dust storm (SDS) is a meteorological phenomenon common in arid and semi-arid regions and arises when a gust front passes or when the wind force exceeds the threshold value where loose sand and dust are removed from the dry surface. After aeolian uptake, SDS reduce visibility to a few meters in and near source regions, and dust plumes are transported over distances as long as thousands of kilometres. Aeolian dust is unique among aerosol phenomena: (1) with the possible exception of sea-salt aerosol, it is globally the most abundant of all aerosol species, (2) it appears as the dominating component of atmospheric aerosol over large areas of the Earth, (3) it represents a serious hazard for life, health, property, environment and economy (occasionally reaching the grade of disaster or catastrophic event) and (4) its influence, impacts, complex interactions and feedbacks within the Earth System span a wide range of spatial and temporal scales. From a political and societal point of view, the concern for SDS and the need for international cooperation were reflected after a survey conducted in 2005 by the World Meteorological Organization (WMO) in which more than forty WMO Member countries expressed their interest for creating or improving capacities for SDS warning advisory and assessment. In this context, recent major advances in research - including, for example, the development and implementation of advanced observing systems, the theoretical understanding of the mechanisms responsible for sand and dust storm generation and the development of global and regional dust models - represent the basis for

  20. Factors affecting adsorption characteristics of Zn2+ on two natural zeolites.

    PubMed

    Oren, Ali Hakan; Kaya, Abidin

    2006-04-17

    Mining-related and industrial wastes are primary sources of heavy metal contamination in soils and groundwater. The limitation of such waste in drinking water needs to meet government requirements in order to safeguard human health and environment. Zinc, one of the most preponderant pollutants, is difficult to remove from wastewater rather than other heavy metals (i.e. lead, copper and cadmium). This paper investigates Zn2+ adsorption characteristics of two natural zeolites found in the regions of Gordes and Bigadic, in western Turkey. The results show that the Zn2+ adsorption behavior of both zeolites is highly dependent on the pH. Adsorption dependence on lower pH values (pH<4) is explained by the dissolution of crystal structure and the competition of the zinc ions with the H+. Between pH 4 and 6, the basic mechanism is the ion exchange process. The results also showed that decrease in grain size does not increase the adsorption capacity of zeolite from Gordes, yet it increases that of zeolite from Bigadic about 23%. The results also reveal that an increase in the initial concentration of Zn2+ in the system causes an increase in the adsorption capacity to a degree, then it becomes more constant at higher concentrations. With this, the removal efficiency of Gordes zeolite is two times higher than that of Bigadic zeolite. Results show that an increase in slurry concentration results in a lower uptake of Zn2+. In the final part of the paper, we compared the experimental data with the Langmuir and Freundlich isotherms. The results show that there is a good fit between the experimental data and empirical isotherms.

  1. Factors affecting adsorption characteristics of Zn2+ on two natural zeolites.

    PubMed

    Oren, Ali Hakan; Kaya, Abidin

    2006-04-17

    Mining-related and industrial wastes are primary sources of heavy metal contamination in soils and groundwater. The limitation of such waste in drinking water needs to meet government requirements in order to safeguard human health and environment. Zinc, one of the most preponderant pollutants, is difficult to remove from wastewater rather than other heavy metals (i.e. lead, copper and cadmium). This paper investigates Zn2+ adsorption characteristics of two natural zeolites found in the regions of Gordes and Bigadic, in western Turkey. The results show that the Zn2+ adsorption behavior of both zeolites is highly dependent on the pH. Adsorption dependence on lower pH values (pH<4) is explained by the dissolution of crystal structure and the competition of the zinc ions with the H+. Between pH 4 and 6, the basic mechanism is the ion exchange process. The results also showed that decrease in grain size does not increase the adsorption capacity of zeolite from Gordes, yet it increases that of zeolite from Bigadic about 23%. The results also reveal that an increase in the initial concentration of Zn2+ in the system causes an increase in the adsorption capacity to a degree, then it becomes more constant at higher concentrations. With this, the removal efficiency of Gordes zeolite is two times higher than that of Bigadic zeolite. Results show that an increase in slurry concentration results in a lower uptake of Zn2+. In the final part of the paper, we compared the experimental data with the Langmuir and Freundlich isotherms. The results show that there is a good fit between the experimental data and empirical isotherms. PMID:16266781

  2. Application of a bacterial extracellular polymeric substance in heavy metal adsorption in a co-contaminated aqueous system

    PubMed Central

    de Oliveira Martins, Paula Salles; de Almeida, Narcisa Furtado; Leite, Selma Gomes Ferreira

    2008-01-01

    The application of a bacterial extracellular polymeric substance (EPS) in the bioremediation of heavy metals (Cd, Zn and Cu) by a microbial consortium in a hydrocarbon co-contaminated aqueous system was studied. At the low concentrations used in this work (1.00 ppm of each metal), it was not observed an inhibitory effect on the cellular growing. In the other hand, the application of the EPS lead to a lower concentration of the free heavy metals in solution, once a great part of them is adsorbed in the polymeric matrix (87.12% of Cd; 19.82% of Zn; and 37.64% of Cu), when compared to what is adsorbed or internalized by biomass (5.35% of Cd; 47.35% of Zn; and 24.93% of Cu). It was noted an increase of 24% in the consumption of ethylbenzene, among the gasoline components that were quantified, in the small interval of time evaluated (30 hours). Our results suggest that, if the experiments were conducted in a larger interval of time, it would possibly be noted a higher effect in the degradation of gasoline compounds. Still, considering the low concentrations that were evaluated, it is possible that a real system could be bioremediated by natural attenuation process, demonstrated by the low effect of those levels of contaminants and co-contaminants over the naturally present microbial consortium. PMID:24031307

  3. Principal component analysis- adaptive neuro-fuzzy inference system modeling and genetic algorithm optimization of adsorption of methylene blue by activated carbon derived from Pistacia khinjuk.

    PubMed

    Ghaedi, M; Ghaedi, A M; Abdi, F; Roosta, M; Vafaei, A; Asghari, A

    2013-10-01

    In the present study, activated carbon (AC) simply derived from Pistacia khinjuk and characterized using different techniques such as SEM and BET analysis. This new adsorbent was used for methylene blue (MB) adsorption. Fitting the experimental equilibrium data to various isotherm models shows the suitability and applicability of the Langmuir model. The adsorption mechanism and rate of processes was investigated by analyzing time dependency data to conventional kinetic models and it was found that adsorption follow the pseudo-second-order kinetic model. Principle component analysis (PCA) has been used for preprocessing of input data and genetic algorithm optimization have been used for prediction of adsorption of methylene blue using activated carbon derived from P. khinjuk. In our laboratory various activated carbon as sole adsorbent or loaded with various nanoparticles was used for removal of many pollutants (Ghaedi et al., 2012). These results indicate that the small amount of proposed adsorbent (1.0g) is applicable for successful removal of MB (RE>98%) in short time (45min) with high adsorption capacity (48-185mgg(-1)).

  4. Comparison of adsorption behavior of PCDD/Fs on carbon nanotubes and activated carbons in a bench-scale dioxin generating system.

    PubMed

    Zhou, Xujian; Li, Xiaodong; Xu, Shuaixi; Zhao, Xiyuan; Ni, Mingjiang; Cen, Kefa

    2015-07-01

    Porous carbon-based materials are commonly used to remove various organic and inorganic pollutants from gaseous and liquid effluents and products. In this study, the adsorption of dioxins on both activated carbons and multi-walled carbon nanotube was internally compared, via series of bench scale experiments. A laboratory-scale dioxin generator was applied to generate PCDD/Fs with constant concentration (8.3 ng I-TEQ/Nm(3)). The results confirm that high-chlorinated congeners are more easily adsorbed on both activated carbons and carbon nanotubes than low-chlorinated congeners. Carbon nanotubes also achieved higher adsorption efficiency than activated carbons even though they have smaller BET-surface. Carbon nanotubes reached the total removal efficiency over 86.8 % to be compared with removal efficiencies of only 70.0 and 54.2 % for the two other activated carbons tested. In addition, because of different adsorption mechanisms, the removal efficiencies of carbon nanotubes dropped more slowly with time than was the case for activated carbons. It could be attributed to the abundant mesopores distributed in the surface of carbon nanotubes. They enhanced the pore filled process of dioxin molecules during adsorption. In addition, strong interactions between the two benzene rings of dioxin molecules and the hexagonal arrays of carbon atoms in the surface make carbon nanotubes have bigger adsorption capacity. PMID:25728198

  5. Temperature and magnetism bi-responsive molecularly imprinted polymers: Preparation, adsorption mechanism and properties as drug delivery system for sustained release of 5-fluorouracil.

    PubMed

    Li, Longfei; Chen, Lin; Zhang, Huan; Yang, Yongzhen; Liu, Xuguang; Chen, Yongkang

    2016-04-01

    Temperature and magnetism bi-responsive molecularly imprinted polymers (TMMIPs) based on Fe3O4-encapsulating carbon nanospheres were prepared by free radical polymerization, and applied to selective adsorption and controlled release of 5-fluorouracil (5-FU) from an aqueous solution. Characterization results show that the as-synthesized TMMIPs have an average diameter of about 150 nm with a typical core-shell structure, and the thickness of the coating layer is approximately 50 nm. TMMIPs also displayed obvious magnetic properties and thermo-sensitivity. The adsorption results show that the prepared TMMIPs exhibit good adsorption capacity (up to 96.53 mg/g at 25 °C) and recognition towards 5-FU. The studies on 5-FU loading and release in vitro suggest that the release rate increases with increasing temperature. Meanwhile, adsorption mechanisms were explored by using a computational analysis to simulate the imprinted site towards 5-FU. The interaction energy between the imprinted site and 5-FU is -112.24 kJ/mol, originating from a hydrogen bond, Van der Waals forces and a hydrophobic interaction between functional groups located on 5-FU and a NIPAM monomer. The electrostatic potential charges and population analysis results suggest that the imprinted site of 5-FU can be introduced on the surface of TMMIPs, confirming their selective adsorption behavior for 5-FU.

  6. Comparison of adsorption behavior of PCDD/Fs on carbon nanotubes and activated carbons in a bench-scale dioxin generating system.

    PubMed

    Zhou, Xujian; Li, Xiaodong; Xu, Shuaixi; Zhao, Xiyuan; Ni, Mingjiang; Cen, Kefa

    2015-07-01

    Porous carbon-based materials are commonly used to remove various organic and inorganic pollutants from gaseous and liquid effluents and products. In this study, the adsorption of dioxins on both activated carbons and multi-walled carbon nanotube was internally compared, via series of bench scale experiments. A laboratory-scale dioxin generator was applied to generate PCDD/Fs with constant concentration (8.3 ng I-TEQ/Nm(3)). The results confirm that high-chlorinated congeners are more easily adsorbed on both activated carbons and carbon nanotubes than low-chlorinated congeners. Carbon nanotubes also achieved higher adsorption efficiency than activated carbons even though they have smaller BET-surface. Carbon nanotubes reached the total removal efficiency over 86.8 % to be compared with removal efficiencies of only 70.0 and 54.2 % for the two other activated carbons tested. In addition, because of different adsorption mechanisms, the removal efficiencies of carbon nanotubes dropped more slowly with time than was the case for activated carbons. It could be attributed to the abundant mesopores distributed in the surface of carbon nanotubes. They enhanced the pore filled process of dioxin molecules during adsorption. In addition, strong interactions between the two benzene rings of dioxin molecules and the hexagonal arrays of carbon atoms in the surface make carbon nanotubes have bigger adsorption capacity.

  7. EDITORIAL: Special issue containing papers presented at the 11th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems Special issue containing papers presented at the 11th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems

    NASA Astrophysics Data System (ADS)

    Kolesnichenko, Ya.

    2010-08-01

    subsequent meetings (Aspenäs (1991), Trieste (1993), Princeton (1995), and JET/Abingdon (1997)) were entitled `Alpha Particles in Fusion Research'. During the JET/Abingdon meeting in 1997 it was decided to extend the topic by including other suprathermal particles, in particular accelerated electrons, and rename the meetings accordingly. The subsequent meetings with the current name `Energetic Particles in Magnetic Confinement Systems' were held in Naka (1999), Gothenburg (2001), San Diego (2003), Takayama (2005) and Kloster Seeon (2007). The most recent meeting in this series was held in Kyiv, Ukraine, in September 2009. This was an anniversary meeting, 20 years after the first meeting. Like the first meeting, it was hosted by the Institute for Nuclear Research, National Academy of Sciences of Ukraine. It was attended by about 80 researchers from 18 countries, ITER, and EC. The program of the meeting consisted of 78 presentations, including 12 invited talks, 16 oral contributed talks, and 50 posters, which were selected by the International Advisory Committee (IAC). The IAC consisted of 11 people representing EC (L.-G. Eriksson), Germany (S. Günter), Italy (F. Zonca), Japan (K. Shinohara and K. Toi), Switzerland (A. Fasoli), UK (S. Sharapov), Ukraine (Ya. Kolesnichenko—IAC Chair), USA (H. Berk, W. Heidbrink, and R. Nazikian). The meeting program covered a wide range of physics issues concerning energetic ions in toroidal fusion facilities—tokamaks, stellarators, and spherical tori. Many new interesting and practically important results of both experimental and theoretical studies were reported. The research presented covered topics such as instabilities driven by energetic ions, transport of energetic ions caused by plasma microturbulence and destabilized eigenmodes, non-linear phenomena induced by the instabilities, classical transport processes, effects of runaway electrons, diagnostics of energetic ions and plasmas, and aspects of ITER physics. In addition to these

  8. Influence of Ca2+ on tetracycline adsorption on montmorillonite.

    PubMed

    Parolo, M Eugenia; Avena, Marcelo J; Pettinari, Gisela R; Baschini, Miria T

    2012-02-15

    The adsorption of tetracycline (TC) on montmorillonite was studied as a function of pH and Ca(2+) concentration using a batch technique complemented with X-ray diffraction and transmission electron microscopy. In the absence of Ca(2+), TC adsorption was high at low pH and decreased as the pH increased. In the presence of Ca(2+), at least two different adsorption processes took place in the studied systems, i.e., cation exchange and Ca-bridging. Cation exchange was the prevailing process at pH<5, and thus, TC adsorption decreased by increasing total Ca(2+) concentration. On the contrary, Ca-bridging was the prevailing process at pH>5, and thus, TC adsorption increased by increasing Ca(2+) concentration. The pH 5 represents an isoadsorption pH where both adsorption processes compensate each other. TC adsorption became independent of Ca(2+) concentration at this pH. For TC adsorption on Ca(2+)-montmorillonite in 0.01 M NaCl experiments, the ratio adsorbed TC/retained Ca(2+) was close to 1 in the pH range of 5-9, indicating an important participation of Ca(2+) in the binding of TC to montmorillonite. X-ray diffraction and transmission electron microscopy showed that TC adsorption induced intercalation between montmorillonite layers forming a multiphase system with stacking of layers with and without intercalated TC. PMID:22189389

  9. Moisture adsorption in optical coatings

    NASA Technical Reports Server (NTRS)

    Macleod, H. Angus

    1988-01-01

    The thin film filter is a very large aperture component which is exceedingly useful because of its small size, flexibility and ease of mounting. Thin film components, however, do have defects of performance and especially of stability which can cause problems in systems, particularly where long-term measurements are being made. Of all of the problems, those associated with moisture absorption are the most serious. Moisture absorption occurs in the pore-shaped voids inherent in the columnar structure of the layers. Ion-assisted deposition is a promising technique for substantially reducing moisture adsorption effects in thin film structures.

  10. 77 FR 2541 - Board Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-18

    ... From the Federal Register Online via the Government Publishing Office FARM CREDIT SYSTEM INSURANCE CORPORATION Board Meeting AGENCY: Farm Credit System Insurance Corporation Board; Regular Meeting. SUMMARY... Investment Portfolio Review of Insurance Premium Rates Overview of Communications Crisis Plan with...

  11. Heterogeneous three-site lattice model for adsorption of aromatics in ZSM-5 zeolites: Temperature dependence of adsorption isotherms

    SciTech Connect

    Narkiewicz-Michalek, J.; Szabelski, P.; Rudzinski, W.; Chiang, A.S.T.

    1999-08-31

    The three-site lattice model of collective localized adsorption of aromatics in ZSM-5 zeolites, presented in previous publications, is extended by taking into account the effects of energetic heterogeneity of the sites of the same type. The appropriate theoretical equations are derived and used for simultaneous description of the experimental adsorption isotherms and heats of adsorption of benzene and p-xylene in silicalite at 303 K. It is shown that taking into account this additional level of heterogeneity leads to a much better description of both the adsorption isotherms and the related heats of adsorption in these systems. The extended model also allows one to predict correctly the adsorption isotherms of benzene and p-xylene in silicalite at different temperatures using the parameters found at one temperature.

  12. Modeling Species Inhibition and Competitive Adsorption in Urea-SCR Catalysts

    SciTech Connect

    Devarakonda, Maruthi N.; Tonkyn, Russell G.; Lee, Jong H.

    2012-04-16

    Although the urea-SCR technology exhibits high NOx reduction efficiency over a wide range of temperatures among the lean NOx reduction technologies, further improvement in low-temperature performance is required to meet the future emission standards and to lower the system cost. In order to improve the catalyst technologies and optimize the system performance, it is critical to understand the reaction mechanisms and catalyst behaviors with respect to operating conditions. Urea-SCR catalysts exhibit poor NOx reduction performance at low temperature operating conditions (T < 150 C). We postulate that the poor performance is either due to NH3 storage inhibition by species like hydrocarbons or due to competitive adsorption between NH3 and other adsorbates such as H2O and hydrocarbons in the exhaust stream. In this paper we attempt to develop one-dimensional models to characterize inhibition and competitive adsorption in Fe-zeolite based urea-SCR catalysts based on bench reactor experiments. We further use the competitive adsorption (CA) model to develop a standard SCR model based on previously identified kinetics. Simulation results indicate that the CA model predicts catalyst outlet NO and NH3 concentrations with minimal root mean square error.

  13. Influence of adsorption versus coprecipitation on the retention of rice straw-derived dissolved organic carbon and subsequent reducibility of Fe-DOC systems

    NASA Astrophysics Data System (ADS)

    Sodano, Marcella; Lerda, Cristina; Martin, Maria; Celi, Luisella; Said-Pullicino, Daniel

    2016-04-01

    adsorption or coprecipitation, DOC was obtained by incubating a suspension of rice straw in water (straw-solution ratio of 1:30) under oxic conditions at 25° C for 30 days to simulate the decomposition of rice straw in the field. Increasing amounts of DOC were equilibrated (pH = 6) with a known mass of ferrihydrite (initial molar C:Fe ratios of 1, 5 and 10) to obtain surface coated Fe-DOC systems with increasing C loading. On the other hand, coprecipitates with similar initial C:Fe ratios were obtained by oxidation of a Fe(II) solution in the presence of increasing amounts of DOC at pH = 6. A natural Fe-DOC coprecipitate was also obtained by in situ sampling of a paddy soil solution from the topsoil during a cropping season, and subsequent oxidation in the laboratory. The surface and chemical properties of all substrates were subsequently evaluated and compared. We hereby present the first results of the influence of adsorption vs coprecipitation on the selective retention of DOC, structure and surface charge, as well as their susceptibility to chemical reduction with ascorbic acid.

  14. Poliovirus Adsorption by 34 Minerals and Soils

    PubMed Central

    Moore, Rebecca S.; Taylor, Dene H.; Sturman, Lawrence S.; Reddy, Michael M.; Fuhs, G. Wolfgang

    1981-01-01

    The adsorption of radiolabeled infectious poliovirus type 2 by 34 well-defined soils and mineral substrates was analyzed in a synthetic freshwater medium containing 1 mM CaCl2 and 1.25 mM NaHCO3 at pH 7. In a model system, adsorption of poliovirus by Ottawa sand was rapid and reached equilibrium within 1 h at 4°C. Near saturation, the adsorption could be described by the Langmuir equation; the apparent surface saturation was 2.5 × 106 plaque-forming units of poliovirus per mg of Ottawa sand. At low surface coverage, adsorption was described by the Freundlich equation. The soils and minerals used ranged from acidic to basic and from high in organic content to organic free. The available negative surface charge on each substrate was measured by the adsorption of a cationic polyelectrolyte, polydiallyldimethylammonium chloride. Most of the substrates adsorbed more than 95% of the virus. In general, soils, in comparison with minerals, were weak adsorbents. Among the soils, muck and Genesee silt loam were the poorest adsorbents; among the minerals, montmorillonite, glauconite, and bituminous shale were the least effective. The most effective adsorbents were magnetite sand and hematite, which are predominantly oxides of iron. Correlation coefficients for substrate properties and virus adsorption revealed that the elemental composition of the adsorbents had little effect on poliovirus uptake. Substrate surface area and pH, by themselves, were not significantly correlated with poliovirus uptake. A strong negative correlation was found between poliovirus adsorption and both the contents of organic matter and the available negative surface charge on the substrates as determined by their capacities for adsorbing the cationic polyelectrolyte, polydiallyldimethylammonium chloride. PMID:6274259

  15. Modeling adsorption: Investigating adsorbate and adsorbent properties

    NASA Astrophysics Data System (ADS)

    Webster, Charles Edwin

    1999-12-01

    Surface catalyzed reactions play a major role in current chemical production technology. Currently, 90% of all chemicals are produced by heterogeneously catalyzed reactions. Most of these catalyzed reactions involve adsorption, concentrating the substrate(s) (the adsorbate) on the surface of the solid (the adsorbent). Pore volumes, accessible surface areas, and the thermodynamics of adsorption are essential in the understanding of solid surface characteristics fundamental to catalyst and adsorbent screening and selection. Molecular properties such as molecular volumes and projected molecular areas are needed in order to convert moles adsorbed to surface volumes and areas. Generally, these molecular properties have been estimated from bulk properties, but many assumptions are required. As a result, different literature values are employed for these essential molecular properties. Calculated molar volumes and excluded molecular areas are determined and tabulated for a variety of molecules. Molecular dimensions of molecules are important in the understanding of molecular exclusion as well as size and shape selectivity, diffusion, and adsorbent selection. Molecular dimensions can also be used in the determination of the effective catalytic pore size of a catalyst. Adsorption isotherms, on zeolites, (crystalline mineral oxides) and amorphous solids, can be analyzed with the Multiple Equilibrium Analysis (MEA) description of adsorption. The MEA produces equilibrium constants (Ki), capacities (ni), and thermodynamic parameters (enthalpies, ΔHi, and entropies, ΔSi) of adsorption for each process. Pore volumes and accessible surface areas are calculated from the process capacities. Adsorption isotherms can also be predicted for existing and new adsorbate-adsorbent systems with the MEA. The results show that MEA has the potential of becoming a standard characterization method for microporous solids that will lead to an increased understanding of their behavior in gas

  16. Adding adsorption to a geothermal simulator

    SciTech Connect

    Holt, R.; Pingol, A.

    1992-01-01

    Physical adsorption of steam has increasingly become recognized as an important storage mechanism in vapor dominated geothermal reservoirs. A method has been developed which allows the effects of adsorption to be modeled using TETRAD, a commercially available geothermal simulator. The method consists of replacing the standard steam table with a new steam table which has been derived to include adsorptive effects. The TETRAD simulator, when run with the pseudo steam table, approximately matches the pressure, production, and saturation behavior of a desorbing geothermal system. Adsorption can be described as the existence of an immobile layer of liquid on the surfaces within a porous medium. The presence of an adsorbed liquid water layer in rocks has been shown experimentally to cause the vapor pressure of steam to be lower than its flat surface vapor pressure for a particular The pseudo steam table accounts for this vapor pressure lowering effect. A test run was made with TETRAD using the pseudo steam table and a low porosity, low permeability reservoir matrix. This test run was compared to an equivalent run made with Stanford Geothermal Program's simulator, ADSORB. The program ADSORB is a one dimensional simulator which has adsorption effects built into its difference equations. The comparison of these runs shows that the pseudo steam table allows TETRAD to match the behavior of the ADSORB simulator. Injection was not investigated in this study. A convenient method of modeling adsorption with TETRAD is to use standard steam tables while allowing for the vapor pressure lowering effect of adsorption. This will require modifications of the equations in the code that describe the partial pressure of the steam phase.

  17. Sulfate adsorption on goethite

    SciTech Connect

    Rietra, R.P.J.J.; Hiemstra, T.; Riemsdijk, W.H. van

    1999-10-15

    Recent spectroscopic work has suggested that only one surface species of sulfate is dominant on hematite. Sulfate is therefore a very suitable anion to test and develop adsorption models for variable charge minerals. The authors have studied sulfate adsorption on goethite covering a large range of sulfate concentrations, surface coverages, pH values, and electrolyte concentrations. Four different techniques were used to cover the entire range of conditions. For characterization at low sulfate concentrations, below the detection limit of sulfate with ICP-AES, the authors used proton-sulfate titrations at constant pH. Adsorption isotherms were studied for the intermediate sulfate concentration range. Acid-base titrations in sodium sulfate and electromobility were used for high sulfate concentrations. All the data can be modeled with one adsorbed species if it is assumed that the charge of adsorbed sulfate is spatially distributed in the interface. The charge distribution of sulfate follows directly from modeling the proton-sulfate adsorption stoichoimemtry sine this stoichiometry is independent of the intrinsic affinity constant of sulfate. The charge distribution can be related to the structure of the surface complex by use of the Pauling bond valence concept and is in accordance with the microscopic structure found by spectroscopy. The intrinsic affinity constant follows from the other measurements. Modeling of the proton-ion stoichoimetry with the commonly used 2-pK models, where adsorbed ions are treated as point charges, is possible only if at least two surface species for sulfate are used.

  18. SEPARATION BY ADSORPTION

    DOEpatents

    Lowe, C.S.

    1959-06-16

    Separation of Pu from fission products by adsorption on hydrous aluminum silicate is described. The Pu in a HNO/sub 3/ solution is oxidized to the hexavalent state and contacted with the silicate which adsorbs fission products. (T.R.H.)

  19. Adsorption of glucose, cellobiose, and cellotetraose onto cellulose model surfaces.

    PubMed

    Hoja, Johannes; Maurer, Reinhard J; Sax, Alexander F

    2014-07-31

    Reliable simulation of molecular adsorption onto cellulose surfaces is essential for the design of new cellulose nanocomposite materials. However, the applicability of classical force field methods to such systems remains relatively unexplored. In this study, we present the adsorption of glucose, cellobiose, and cellotetraose on model surfaces of crystalline cellulose Iα and Iβ. The adsorption of the two large carbohydrates was simulated with the GLYCAM06 force field. To validate this approach, quantum theoretical calculations for the adsorption of glucose were performed: Equilibrium geometries were studied with density functional theory (DFT) and dispersion-corrected DFT, whereas the adsorption energies were calculated with two standard density functional approximations and five dispersion-containing DFT approaches. We find that GLYCAM06 gives a good account of geometries and, in most cases, accurate adsorption energies when compared to dispersion-corrected DFT energies. Adsorption onto the (100) surface of cellulose Iα is, in general, stronger than onto the (100) surface of cellulose Iβ. Contrary to intuition, the adsorption energy is not directly correlated with the number of hydrogen bonds; rather, it is dominated by dispersion interactions. Especially for bigger adsorbates, a neglect of these interactions leads to a dramatic underestimation of adsorption energies.

  20. Adsorption of glucose, cellobiose, and cellotetraose onto cellulose model surfaces.

    PubMed

    Hoja, Johannes; Maurer, Reinhard J; Sax, Alexander F

    2014-07-31

    Reliable simulation of molecular adsorption onto cellulose surfaces is essential for the design of new cellulose nanocomposite materials. However, the applicability of classical force field methods to such systems remains relatively unexplored. In this study, we present the adsorption of glucose, cellobiose, and cellotetraose on model surfaces of crystalline cellulose Iα and Iβ. The adsorption of the two large carbohydrates was simulated with the GLYCAM06 force field. To validate this approach, quantum theoretical calculations for the adsorption of glucose were performed: Equilibrium geometries were studied with density functional theory (DFT) and dispersion-corrected DFT, whereas the adsorption energies were calculated with two standard density functional approximations and five dispersion-containing DFT approaches. We find that GLYCAM06 gives a good account of geometries and, in most cases, accurate adsorption energies when compared to dispersion-corrected DFT energies. Adsorption onto the (100) surface of cellulose Iα is, in general, stronger than onto the (100) surface of cellulose Iβ. Contrary to intuition, the adsorption energy is not directly correlated with the number of hydrogen bonds; rather, it is dominated by dispersion interactions. Especially for bigger adsorbates, a neglect of these interactions leads to a dramatic underestimation of adsorption energies. PMID:25036217

  1. 76 FR 64082 - Mandatory Reliability Standards for the Bulk-Power System; Notice of Staff Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-17

    ... Energy Regulatory Commission Mandatory Reliability Standards for the Bulk-Power System; Notice of Staff... Discussion on the reliability issues relating to ``Single Point of Failure on Protection Systems,'' on Monday... Reliability Standard TPL-002- 0 (System Performance Following Loss of a Single Bulk Electric System...

  2. Adsorption of gases on carbon molecular sieves

    SciTech Connect

    Vyas, S.N.; Patwardhan, S.R.; Vijayalakshmi, S. . Dept. of Chemical Engineering); Ganesh, K.S. )

    1994-12-01

    Adsorption on carbon molecular sieves (CMS) prepared by coke deposition has become an interesting area of adsorption due to its microporous nature and favorable separation factor on size and shape selectivity basis for many gaseous systems. In the present work CMS was synthesized from coconut shell through three major steps, namely, carbonization, activation, and coke deposition by hydrocarbon cracking. The crushed, washed, and sieved granules of coconut shell (particle size 2--3 mm) were pretreated with sodium silicate solution and oven-dried at 150 C to create the inorganic sites necessary for coke deposition. Carbonization and activation of the dried granules were carried out at 800 C, for 30 min each. The activated char thus produced was subjected to hydrocarbon cracking at 600 C for periods varying from 30 to 180 min. The product samples were characterized in terms of adsorption isotherm, kinetic adsorption curve, surface area, pore volume, pore size distribution, and characteristic energy for adsorption by using O[sub 2], N[sub 2], C[sub 2]H[sub 2], CO[sub 2], C[sub 3]H[sub 6], and CH[sub 4].

  3. Final Report - Development of New Pressure Swing Adsorption (PSA) Technology to Recover High Valued Products from Chemical Plant and Refinery Waste Systems

    SciTech Connect

    Keith Ludwig

    2004-06-14

    Project Objective was to extend pressure swing adsorption (PSA) technology into previously under-exploited applications such as polyolefin production vent gas recovery and H2 recovery from refinery waste gases containing significant amounts of heavy hydrocarbons, aromatics, or H2S.

  4. Theoretical structural study on the adsorption properties of aliphatic aldehydes on ZnO nanoclusters and graphene-like nanosheets systems

    NASA Astrophysics Data System (ADS)

    Tayebee, R.; Zamand, N.; Hosseini-nasr, A.; Kargar Razi, M.

    2014-05-01

    The structure optimizations for some aliphatic aldehydes adsorbed on ZnO nanoclusters, and graphene-like nanosheets were carried out using the B3LYP/LanL2DZ calculations and the adsorption energies were calculated. It was considered that adsorption of the examined aldehydes on the ZnO nanoclusters and graphene-like nanosheets occurred through carbonyl oxygens of aldehyde molecules with the surface Zn2+ ions of the central ring. Aldehydes with the general formula of R-COH (R denotes a branched or linear aliphatic chain with maximum of three carbon atoms) were considered. Also, Effects of chain length were investigated on the orientation of the aldehyde molecules with respect to the nanosheet and nanocluster surfaces. Findings revealed that the adsorption energy was decreased with enhancing chain length. However, the most negative adsorption energy was obtained for iso-butyraldehyde, as a branched aldehyde. Interaction of the aldehyde molecules with the surfaces of nanosheets were analyzed by means of DOS analysis and Bader's method. We hope the obtained results be helpful in identifying the mechanism of cyclotrimerization of aliphatic aldehydes on the surface of zinc oxide nanoparticles.

  5. Preliminary Report on Monosodium Titanate Adsorption Kinetics

    SciTech Connect

    Hobbs, D.T.

    1998-12-11

    The Salt Disposition Systems Engineering Team identified the adsorption kinetics of actinides and strontium onto monosodium titanate (MST) as a technical risk for several of the processing alternatives selected for additional evaluation in Phase III of their effort. The Flow Sheet Team requested that the Savannah River Technology Center (SRTC) examine the adsorption kinetics of MST for several process alternatives.This study consisted of a statistically designed set of tests to determine the rate of adsorption of strontium, uranium, neptunium and plutonium as a function of temperature, MST concentration, and concentrations of sodium, strontium, uranium, neptunium and plutonium. Additional tests incorporated into the design assess the effects of mixing as well as the influence from the presence of sludge solids and sodium tetraphenylborate.

  6. Carbonaceous materials for adsorptive refrigerators

    NASA Astrophysics Data System (ADS)

    Buczek, B.; Wolak, E.

    2012-06-01

    Carbon monoliths prepared from hard coal precursors were obtained. The porous structure of the monoliths was evaluated on the basis of nitrogen adsorption — desorption equilibrium data. The investigated monoliths have a well-developed microporous structure with significant specific surface area (S BET ). Equilibrium studies of methanol vapour adsorption were used to characterize the methanol adsorptive capacity that was determined using a volumetric method. The heat of wetting by methanol was determined in order to estimate the energetic effects of the adsorption process. The results of the investigations show that all monoliths exhibit high adsorption capacity and high heat of wetting with methanol.

  7. Understanding pH Effects on Trichloroethylene and Perchloroethylene Adsorption to Iron in Permeable Reactive Barriers for Groundwater Remediation.

    PubMed

    Luo, Jing; Farrell, James

    2013-01-01

    Metallic iron filings are becoming increasing used in permeable reactive barriers for remediating groundwater contaminated by chlorinated solvents. Understanding solution pH effects on rates of reductive dechlorination in permeable reactive barriers is essential for designing remediation systems that can meet treatment objectives under conditions of varying groundwater properties. The objective of this research was to investigate how the solution pH value affects adsorption of trichloroethylene (TCE) and perchloroethylene (PCE) on metallic iron surfaces. Because adsorption is first required before reductive dechlorination can occur, pH effects on halocarbon adsorption energies may explain pH effects on dechlorination rates. Adsorption energies for TCE and PCE were calculated via molecular mechanics simulations using the Universal force field and a self-consistent reaction field charge equilibration scheme. A range in solution pH values was simulated by varying the amount of atomic hydrogen adsorbed on the iron. The potential energies associated TCE and PCE complexes were dominated by electrostatic interactions, and complex formation with the surface was found to result in significant electron transfer from the iron to the adsorbed halocarbons. Adsorbed atomic hydrogen was found to lower the energies of TCE complexes more than those for PCE. Attractions between atomic hydrogen and iron atoms were more favorable when TCE versus PCE was adsorbed to the iron surface. These two findings are consistent with the experimental observation that changes in solution pH affect TCE reaction rates more than those for PCE.

  8. 40 CFR 63.2485 - What requirements must I meet for wastewater streams and liquid streams in open systems within an...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... wastewater streams and liquid streams in open systems within an MCPU? 63.2485 Section 63.2485 Protection of... liquid streams in open systems within an MCPU? (a) You must meet each requirement in table 7 to this subpart that applies to your wastewater streams and liquid streams in open systems within an MCPU,...

  9. Ammonia Production Using Pressure Swing Adsorption

    SciTech Connect

    2009-02-01

    This factsheet describes a research project whose overall objective is to develop and demonstrate a technically feasible and commercially viable system that integrates reaction to produce ammonia along with recovery of the products by adsorption separation methods and significantly decrease the energy requirement in ammonia production.

  10. Applied Systemic Theory and Educational Psychology: Can the Twain Ever Meet?

    ERIC Educational Resources Information Center

    Pellegrini, Dario W.

    2009-01-01

    This article reflects on the potential benefits of applying systemic theory to the work of educational psychologists (EPs). It reviews developments in systemic thinking over time, and discusses the differences between more directive "first order" versus collaborative "second order" approaches. It considers systemic theories and illustrates their…

  11. 78 FR 11877 - Announcement of Requirements Gathering Meetings for the Electronic Manifest (e-Manifest) System

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-20

    ... agency begins the planning stage of the e-Manifest system development process. EPA envisions that e... electronically completing and transmitting manifests through a national, centralized e-Manifest system (71 FR... planning phase to begin the development and ultimately the deployment of the e-Manifest system by 2015....

  12. Validation Methods Research for Fault-Tolerant Avionics and Control Systems: Working Group Meeting, 2

    NASA Technical Reports Server (NTRS)

    Gault, J. W. (Editor); Trivedi, K. S. (Editor); Clary, J. B. (Editor)

    1980-01-01

    The validation process comprises the activities required to insure the agreement of system realization with system specification. A preliminary validation methodology for fault tolerant systems documented. A general framework for a validation methodology is presented along with a set of specific tasks intended for the validation of two specimen system, SIFT and FTMP. Two major areas of research are identified. First, are those activities required to support the ongoing development of the validation process itself, and second, are those activities required to support the design, development, and understanding of fault tolerant systems.

  13. International Atomic Energy Agency specialists meeting on experience in ageing, maintenance, and modernization of instrumentation and control systems for improving nuclear power plant availability

    SciTech Connect

    Not Available

    1993-10-01

    This report presents the proceedings of the Specialist`s Meeting on Experience in Aging, Maintenance and Modernization of Instrumentation and Control Systems for Improving Nuclear Power Plant Availability that was held at the Ramada Inn in Rockville, Maryland on May 5--7, 1993. The Meeting was presented in cooperation with the Electric Power Research Institute, Oak Ridge National Laboratory and the International Atomic Energy Agency. There were approximately 65 participants from 13 countries at the Meeting. Individual reports have been cataloged separately.

  14. Managing Meetings

    ERIC Educational Resources Information Center

    Hay, Susan

    2010-01-01

    Meetings are a means of giving people a chance to contribute. Meetings are also the nursery where the people's skills of listening, speaking, and building good working relationships are honed. They are where people practice being courteously challenging and confident, and they are where people are fascinated and fascinating. Meetings are where…

  15. 40 CFR 141.550 - Is my system required to meet subpart T combined filter effluent turbidity limits?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... utilize filtration other than slow sand filtration or diatomaceous earth filtration must meet the combined... diatomaceous earth filtration you are not required to meet the combined filter effluent turbidity limits...

  16. 40 CFR 141.550 - Is my system required to meet subpart T combined filter effluent turbidity limits?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... utilize filtration other than slow sand filtration or diatomaceous earth filtration must meet the combined... diatomaceous earth filtration you are not required to meet the combined filter effluent turbidity limits...

  17. Gas turbine systems development to meet the requirements of a dual fuel biomass/diesel oil application

    SciTech Connect

    Mina, T.I.; Robinson, G.S.; Seamer, A.

    1994-12-31

    The present work describes the necessary development and modifications undertaken to supply an EGT TYPHOON gas turbine to operate on a gas fuel, produced by the gasification of wood waste (biomass gas fuel), with a lower calorific value, (LCV), in the range of 4.6 to 5 MJ/Nm{sup 3}. The systems involved are air bleed, fuel, combustion and control. All systems have been developed to production standards and meet the requirements for a dual fuel biomass/diesel commercial application. The gasification process utilises an air blown pressurised bed type gasifier. The air is supplied to the gasifier from the gas turbine compressor via a booster compressor. The air bleed system is designed to supply up to 15% of total compressor air to the gasification process with minimum disturbance to the combustion system and minimum pressure loss. The biomass fuel is supplied to the gas turbine at a temperature in the range of 300{degrees}C to 400{degrees}C and a working pressure up to 22 bara. The gas fuel system is designed to supply and control the biomass fuel flow at the above conditions and to compensate for variation in the LCV of the gas. The biomass fuel will not be available until the gasifier has reached steady state operating conditions, therefore, the gas turbine must run for a considerable length of time on an alternative fuel, in this case diesel oil. The gas turbine combustion system is designed to operate on the biomass fuel and diesel oil. The system has been developed to be capable of starting on the auxiliary fuel and operating around the required engine cycle, including on-load fuel change over. An imposed restriction on the combustion system design has been to maintain physical interchangeability with the standard conventional TYPHOON combustion system. The gas turbine control system has been modified to allow satisfactory interaction with the integrated plant.

  18. 78 FR 16756 - Twenty-Second Meeting: RTCA Special Committee 213, Enhanced Flight Vision Systems/Synthetic...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-18

    ... Federal Aviation Administration Twenty-Second Meeting: RTCA Special Committee 213, Enhanced Flight Vision... of Transportation (DOT). ACTION: Meeting Notice of RTCA Special Committee 213, Enhanced Flight Vision... of the twenty-second meeting of the RTCA Special Committee 213, Enhanced Flight Vision...

  19. 75 FR 31815 - Meeting of the Department of Justice's (DOJ's) National Motor Vehicle Title Information System...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-04

    ... Information System (NMVTIS) Federal Advisory Committee AGENCY: Office of Justice Programs (OJP), Justice... Title Information System (NMVTIS) Federal Advisory Committee to discuss the role of the NMVTIS Federal...) 305-1661. FOR FURTHER INFORMATION CONTACT: Alissa Huntoon, Designated Federal Employee (DFE),...

  20. 76 FR 8778 - Meeting of the Department of Justice's (DOJ's) National Motor Vehicle Title Information System...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-15

    ... Information System (NMVTIS) Federal Advisory Committee AGENCY: Office of Justice Programs (OJP), Justice... Title Information System (NMVTIS) Federal Advisory Committee to discuss the role of the NMVTIS Federal...) 305-1661. FOR FURTHER INFORMATION CONTACT: Alissa Huntoon, Designated Federal Official (DFO),...