Science.gov

Sample records for adult ringed seals

  1. Seasonal Activity Budget of Adult Baltic Ringed Seals

    PubMed Central

    Harkonen, Tero; Jüssi, Mart; Jüssi, Ivar; Verevkin, Michail; Dmitrieva, Lilia; Helle, Eero; Sagitov, Roustam; Harding, Karin C.

    2008-01-01

    Although ringed seals are important components in oceanic and fresh water ecosystems at high latitudes, little is known about how they exploit these harsh environments. Seasonal activity and diving behaviour of 19 adult Baltic ringed seals were studied by satellite telemetry. We elaborated an activity budget for ten months of the year, extending over the period from moult to the breeding season. Seals from three main regions showed explicit site fidelity and the distributions of animals tagged from different areas did not overlap, suggesting separate stocks. Both the mean duration and the mean depth of dives peaked in June and July. Seals spent 70% (females) to 85% (males) of their time diving in June and July which decreased to 50% in late autumn. Less than one percent of dives exceeded 10 min in females, while 10% of male dives lasted longer than 10 min in June to September. Less than one percent of dives lasted for more than 25 min. Both females and males were most active during day time and hauled out predominantly during the night. Activity patterns during the summer are suggested to be correlated to energy accumulation and prey availability. The information on seasonal activity budget is crucial for developing population energetic models where interactions between ringed seals and other trophic levels can be evaluated. PMID:18414676

  2. Seal ring installation tool

    NASA Technical Reports Server (NTRS)

    Haselmaier, L. Haynes (Inventor)

    2004-01-01

    A seal ring tool that allows an installer to position a primary seal ring between hub ends of pipe flanges that are being assembled together. The tool includes a pivoting handle member and extension arms attached to the pivoting handle member. The ends of the arms have side indentation type longitudinal grooves angled toward one another for holding the primary seal ring in place between the hubs of respective pipes that are to be attached together. The arms of the tool can also have flat sides that can be used to abut against an optional second larger seal that is supported within a groove in one of the hub ends so that the second hub end can then be moved against the other side of the primary seal ring. Once the seal ring is positioned between the pipe hubs, the pipe hubs can be moved about the seal ring due to the flat sides of the arms of the tool. The tool eliminates the chances of damaging and contaminating seal rings being installed within pipe hubs that are being attached to one another.

  3. Conical O-ring seal

    DOEpatents

    Chalfant, G.G. Jr.

    A shipping container for radioactive or other hazardous materials has a conical-shaped closure containing grooves in the conical surface thereof and an O-ring seal incorporated in each of such grooves. The closure and seal provide a much stronger, tighter and compact containment than with a conventional flanged joint.

  4. Conical O-ring seal

    DOEpatents

    Chalfant, Jr., Gordon G.

    1984-01-01

    A shipping container for radioactive or other hazardous materials which has a conical-shaped closure containing grooves in the conical surface thereof and an O-ring seal incorporated in each of such grooves. The closure and seal provide a much stronger, tighter and compact containment than with a conventional flanged joint.

  5. Reactor cavity seal ring

    SciTech Connect

    Hankinson, M.F.

    1986-04-22

    A hydrostatic seal is described for sealing an annular gap between two flat substantially horizontal coplanar surfaces comprising, in combination: a generally flat annular plate of a width sufficient to span a gap between two surfaces: compressible annular sealing means disposed on the bottom surface of the flat annular plate for sealingly engaging the two flat surfaces in response to a downward force exerted on the plate; and fastening means, distributed along the center line of the plate, for releasably fastening the plate in a position to span the gap to be sealed and exert a downward force on the plate, each fastening means including a pair of elongated members of a size to fit into the gap to be sealed, means for mounting the members on the bottom surface of the plate so that at least a portion of each member is radially moveable in a direction toward a respective one of the vertical side surfaces defining the gap to be sealed to engage same and so that the plate is moveable relative to the members in a downward direction in response to hydrostatic pressure applied to the upper surface of the plate when the members are engaging the vertical side surfaces of an annular gap, and an actuating means, mounted on the plate for movement therewith in response to hydrostatic pressure, for radially moving the members, the actuating means extending through a bore in the plate to the upper surface of the plate.

  6. Split-ring seal

    NASA Technical Reports Server (NTRS)

    Gallo, E. A.

    1976-01-01

    Gland-type seal may be used with hydraulic and pneumatic actuators and similar equipment. It is designed for applications with partial vacuums and requires little space for installation and infrequent servicing.

  7. Structural Design and Sealing Performance Analysis of Biomimetic Sealing Ring.

    PubMed

    Han, Chuanjun; Zhang, Han; Zhang, Jie

    2015-01-01

    In order to reduce the failure probability of rubber sealing rings in reciprocating dynamic seal, a new structure of sealing ring based on bionics was designed. The biomimetic ring has three concave ridges and convex bulges on each side which are very similar to earthworms. Bulges were circularly designed and sealing performances of the biomimetic ring in both static seal and dynamic seal were simulated by FEM. In addition, effects of precompression, medium pressure, speed, friction coefficient, and material parameters on sealing performances were discussed. The results show that von Mises stress of the biomimetic sealing ring distributed symmetrically in no-pressure static sealing. The maximum von Mises stress appears on the second bulge of the inner side. High contact stress concentrates on left bulges. Von Mises stress distribution becomes uneven under medium pressure. Both von Mises stress and contact stress increase when precompression, medium pressure, and rubber hardness increase in static sealing. Biomimetic ring can avoid rolling and distortion in reciprocating dynamic seal, and its working life is much longer than O-ring and rectangular ring. The maximum von Mises stress and contact stress increase with the precompression, medium pressure, rubber hardness, and friction coefficient in reciprocating dynamic seal. PMID:27019582

  8. Structural Design and Sealing Performance Analysis of Biomimetic Sealing Ring

    PubMed Central

    Han, Chuanjun

    2015-01-01

    In order to reduce the failure probability of rubber sealing rings in reciprocating dynamic seal, a new structure of sealing ring based on bionics was designed. The biomimetic ring has three concave ridges and convex bulges on each side which are very similar to earthworms. Bulges were circularly designed and sealing performances of the biomimetic ring in both static seal and dynamic seal were simulated by FEM. In addition, effects of precompression, medium pressure, speed, friction coefficient, and material parameters on sealing performances were discussed. The results show that von Mises stress of the biomimetic sealing ring distributed symmetrically in no-pressure static sealing. The maximum von Mises stress appears on the second bulge of the inner side. High contact stress concentrates on left bulges. Von Mises stress distribution becomes uneven under medium pressure. Both von Mises stress and contact stress increase when precompression, medium pressure, and rubber hardness increase in static sealing. Biomimetic ring can avoid rolling and distortion in reciprocating dynamic seal, and its working life is much longer than O-ring and rectangular ring. The maximum von Mises stress and contact stress increase with the precompression, medium pressure, rubber hardness, and friction coefficient in reciprocating dynamic seal. PMID:27019582

  9. Physical properties of Dowell Chemical Seal Ring

    SciTech Connect

    Benny, H.L.

    1985-07-01

    This document outlines the tests, procedures, and results of an evaluation program for Dowell's Chemical Seal Ring.'' The testing reported here deals with the physical properties of density, compression, tensile strength, elongation, and a push-out/bond strength test. Dowell's Chemical Seal Ring'' is proposed as a gasket-like seal between grout layers in the annulus around the Exploratory Shaft steel liner. 4 refs., 1 fig., 4 tabs.

  10. Sealed and lubricated rock bit with air protected seal ring

    SciTech Connect

    Galle, E.M.

    1983-03-01

    An earth boring rock bit having a sealed bearing and pressure lubrication system for drilling the earth with air or gas as the circulating medium. An annular groove is formed in the vicinity of the seal and connected to the interior of the bit for cooling the ring and cleaning debris from the area of the ring. The air pressure inside the bit is utilized to bias a movable element in the system to urge lubricant to the bearing.

  11. Low thermal expansion seal ring support

    DOEpatents

    Dewis, David W.; Glezer, Boris

    2000-01-01

    Today, the trend is to increase the temperature of operation of gas turbine engines. To cool the components with compressor discharge air, robs air which could otherwise be used for combustion and creates a less efficient gas turbine engine. The present low thermal expansion sealing ring support system reduces the quantity of cooling air required while maintaining life and longevity of the components. Additionally, the low thermal expansion sealing ring reduces the clearance "C","C'" demanded between the interface between the sealing surface and the tip of the plurality of turbine blades. The sealing ring is supported by a plurality of support members in a manner in which the sealing ring and the plurality of support members independently expand and contract relative to each other and to other gas turbine engine components.

  12. Mechanical seal having a double-tier mating ring

    DOEpatents

    Khonsari, Michael M.; Somanchi, Anoop K.

    2005-09-13

    An apparatus and method to enhance the overall performance of mechanical seals in one of the following ways: by reducing seal face wear, by reducing the contact surface temperature, or by increasing the life span of mechanical seals. The apparatus is a mechanical seal (e.g., single mechanical seals, double mechanical seals, tandem mechanical seals, bellows, pusher mechanical seals, and all types of rotating and reciprocating machines) comprising a rotating ring and a double-tier mating ring. In a preferred embodiment, the double-tier mating ring comprises a first and a second stationary ring that together form an agitation-inducing, guided flow channel to allow for the removal of heat generated at the seal face of the mating ring by channeling a coolant entering the mating ring to a position adjacent to and in close proximity with the interior surface area of the seal face of the mating ring.

  13. Pressure-Energized Seal Rings to Better Withstand Flows

    NASA Technical Reports Server (NTRS)

    Farner, Bruce

    2009-01-01

    Pressure-energized seal rings intended to withstand flows better than do conventional pressure-energized seal rings have been conceived. The concept applies, more specifically, to seal rings used on some valve stems, pistons, and the like. A conventional pressure-energized seal ring generally has a U-shaped cross section and consists of an elastomer or other suitable polymer with an embedded metal energizing spring (see Figure 1). The working fluid from the high-pressure side that one seeks to seal is allowed into the U-shaped cavity, so that the pressure pushes the sides of the seal ring tighter against the gland and body sealing surfaces, thereby increasing the degree of sealing. Unfortunately, when the seal ring is exposed to flow of the working fluid, under some conditions, the flow grabs the lip of the U-shaped cross section and ejects or deforms the seal ring so that, thereafter, a proper seal is not obtained. Figure 2 depicts one of several alternative seal rings according to the present concept. One element of the concept is to modify the U-shaped cross section from that of the corresponding conventional seal ring to eliminate the exposed lip and prevent entry of the working fluid into the U-shaped cavity. Unlike in the conventional seal, pressurized fluid would not push the seal ring directly against the both gland and body sealing surfaces. Instead, the pressure would directly push the seal ring against a gland sealing surface only. In so doing, the pressure would squash the seal ring into a smaller volume bounded by the gland and body sealing surfaces, and would thereby indirectly press the seal ring more tightly against the body sealing surface. To enhance the desired squashing deformation, a spring having an approximately parallelogram cross section would be embedded in the modified U-shaped cavity. As the pressure pushed two corners of the approximate parallelogram closer together along the axis of the seal ring, the other two corners of the

  14. Mechanical seal having a single-piece, perforated mating ring

    DOEpatents

    Khonsari, Michael M.; Somanchi, Anoop K.

    2007-08-07

    A mechanical seal (e.g., single mechanical seals, double mechanical seals, tandem mechanical seals, bellows, pusher mechanical seals, and all types of rotating and reciprocating machines) with reduced contact surface temperature, reduced contact surface wear, or increased life span. The mechanical seal comprises a rotating ring and a single-piece, perforated mating ring, which improves heat transfer by controllably channeling coolant flow through the single-piece mating ring such that the coolant is in substantially uniform thermal contact with a substantial portion of the interior surface area of the seal face, while maintaining the structural integrity of the mechanical seal and minimizing the potential for coolant flow interruptions to the seal face caused by debris or contaminants (e.g., small solids and trash) in the coolant.

  15. Operating aspects of an oil pumping ring seal

    NASA Technical Reports Server (NTRS)

    Smith, P. J.; Keith, T. G., Jr.

    1986-01-01

    Past analyses have left several unanswered questions regarding the operation of a pumping ring seal. This paper addresses some of these unresolved problems. In particular, treatment of the film-ring interfacial boundary condition and the return portion of the pumping cycle are numerically investigated. Further a simple model is proposed to determine whether or not the seal operates fully flooded.

  16. Monitoring Snow on ice as Critical Habitat for Ringed Seals

    NASA Astrophysics Data System (ADS)

    Kelly, B. P.; Moran, J.; Douglas, D. C.; Nghiem, S. V.

    2007-12-01

    Ringed seals are the primary prey of polar bears, and they are found in all seasonally ice covered seas of the northern hemisphere as well as in several freshwater lakes. The presence of snow covered sea ice is essential for successful ringed seal reproduction. Ringed seals abrade holes in the ice allowing them to surface and breathe under the snow cover. Where snow accumulates to sufficient depths, ringed seals excavate subnivean lairs above breathing holes. They rest, give birth, and nurse their young in those lairs. Temperatures within the lairs remain within a few degrees of freezing, well within the zone of thermal neutrality for newborn ringed seals, even at ambient temperatures of -30° C. High rates of seal mortality have been recorded when early snow melt caused lairs to collapse exposing newborn seals to predators and to subsequent extreme cold events. As melt onset dates come earlier in the Arctic Ocean, ringed seal populations (and the polar bears that depend upon them) will be increasingly challenged. We determined dates of lair abandonment by ringed seals fitted with radio transmitters in the Beaufort Sea (n = 60). We compared abandonment dates to melt onset dates measured in the field, as well as estimated dates derived from active (Ku-band backscatter) and passive (SSM/I) microwave satellite imagery. Date of snow melt significantly improved models of environmental influences on the timing of lair abandonment. We used an algorithm based on multi-channel means and variances of passive microwave data to detect melt onset dates. Those melt onset dates predicted the date of lair abandonment ± 3 days (r 2 = 0.982, p = 0.001). The predictive power of passive microwave proxies combined with their historical record suggest they could serve to monitor critical changes to ringed seal habitat.

  17. Vacuum Packaging of MEMS With Multiple Internal Seal Rings

    NASA Technical Reports Server (NTRS)

    Hayworth, Ken; Yee, Karl; Shcheglov, Kirill; Bae, Youngsam; Wiberg, Dean; Peay, Chris; Challoner, Anthony

    2008-01-01

    A proposed method of design and fabrication of vacuum-packaged microelectromechanical systems (MEMS) and of individual microelectromechanical devices involves the use of multiple internal seal rings (MISRs) in conjunction with vias (through holes plated with metal for electrical contacts). The proposed method is compatible with mass production in a wafer-level fabrication process, in which the dozens of MEMS or individual microelectromechanical devices on a typical wafer are simultaneously vacuum packaged by bonding a capping wafer before the devices are singulated (cut apart by use of a dicing saw). In addition to being compatible with mass production, the proposed method would eliminate the need for some complex and expensive production steps and would yield more reliable vacuum seals. Conventionally, each MEMS or individual microelectromechanical device is fabricated as one of many identical units on a device wafer. Vacuum packaging is accomplished by bonding the device wafer to a capping wafer with metal seal rings (one ring surrounding each unit) that have been formed on the capping wafer. The electrical leads of each unit are laid out on what would otherwise be a flat surface of the device wafer, against which the seal ring is to be pressed for sealing. The resulting pattern of metal lines and their insulating oxide coverings presents a very rough and uneven surface, upon which it is difficult to pattern the sealing metal. Consequently, the seal is prone to leakage unless additional costly and complex planarization steps are performed before patterning the seal ring and bonding the wafers.

  18. SRB attach ring phenolic TPS fishtail seal evaluation tests

    NASA Technical Reports Server (NTRS)

    Karu, Z. S.

    1982-01-01

    The SRB attach ring is thermally protected with layered phenolic cloth fairings that are fastened to the ring. The gap between the fairings and the motor case is closed off with a rubber seal of a fishtail cross sectional shape bonded to the phenolic. On both the STS-1 and STS-2 flights this gap was discovered to vary anywhere from an intended gap of 0.375 in. to an actual measured gap of 0.60 in. due to tolerances. Tests were conducted with and without a 0.25 in. thick cork shim placed under the seal with a 0.60 in. gap under the phenolic TPS to determine and compare the performance of the seal in the two different configurations. To alleviate the difficult and costly procedure of installing the cork shim under the seal, especially after phenolic TPS mounting on the attach ring, large fishtail seals of idential Elder gray silicon material and two different hardnesses were tested. A similar matrix of tests was conducted with this new large fishtail seal, and seals with both type hardnesses performed well regardless of whether or not the seal was bonded in the phenolic at the front of the seal groove. Similar results had been obtained with the original small fishtail seal which performed adequately with the 0.25 in. cork shim under it.

  19. Macroscopic Anatomy of the Saimaa Ringed Seal (Phoca hispida saimensis) Lower Respiratory Tract.

    PubMed

    Laakkonen, Juha; Jernvall, Jukka

    2016-04-01

    We studied the macroscopic anatomy of the lower respiratory tract of the endangered Saimaa ringed seal (Phoca hispida saimensis). Examination of one adult and one young individual found dead showed that trachea had 85 and 86 complete cartilage rings. The adjacent cartilages exhibited very few random anastomoses. There was variation in the confirmation of the trachea between the cranial and caudal part of the trachea. The right lung was divided by partly incomplete inter-lobar fissures into cranial, middle, caudal, and accessory lobes. The left lung consisted of cranial, middle, and caudal lobes. The lungs were characterized by a high amount of interlobular connective tissue. Silicone casts were prepared of the two specimens to visualize the tracheobronchial branching which was similar to that of marine ringed seals but in the Saimaa ringed seal the right middle lobar bronchus originated at the same level as the accessory lobar bronchus. Anat Rec, 299:538-543, 2016. © 2016 Wiley Periodicals, Inc. PMID:26766601

  20. Design analysis of a self-acting spiral-groove ring seal for counter-rotating shafts. [o ring seals

    NASA Technical Reports Server (NTRS)

    Di Russo, EL

    1983-01-01

    A self-acting spiral groove inter-shaft ring seal of nominal 16.33 cm (6.43 in.) diameter for sealing fan bleed air between counter rotating shafts in advanced turbofan engines was analyzed. The analysis focused on the lift force characteristics of the spiral grooves. A NASA Lewis developed computer program for predicting the performance of gas lubricated face seals was used to optimize the spiral groove geometry to produce maximum lift force. Load capacity curves (lift force as function of film thickness) were generated for four advanced turbofan engine operating conditions at relative seal speeds ranging from 17,850 to 29,800 rpm, sealed air pressures from 6 to 42 N/sq cm (9 to 60 Psi) absolute and temperatures from 95 to 327 C (203 to 620 F). The relative seal sliding speed range was 152 to 255 m/sec (500 to 836 ft/sec). The analysis showed that the spiral grooves are capable of producing sufficient lift force such that the ring seal will operate in a noncontacting mode over the operating range of typical advanced turbofan engines. Previously announced in STAR as N83-23306

  1. Fluorocarbon seal replaces metal piston ring in low density gas environment

    NASA Technical Reports Server (NTRS)

    Morath, W. D.; Morgan, N. E.

    1967-01-01

    Reinforced fluorocarbon cupseal, which provides an integral lip-type seal, replaces the metal piston rings in piston-cylinder configurations used in the compression of low density gases. The fluorocarbon seal may be used as cryogenic compressor piston seals.

  2. O-ring sealing arrangements for ultra-high vacuum systems

    SciTech Connect

    Flaherty, R.; Kim, C.

    1981-08-04

    An all metal reusable o-ring sealing arrangement is disclosed for sealing two concentric tubes in an ultra-high vacuum system. An o-ring of a heat recoverable alloy such as nitinol is concentrically positioned between protruding sealing rings of the concentric tubes. The o-ring is installed between the tubes while in a stressed martensitic state and is made to undergo a thermally induced transformation to an austenitic state. During the transformation the o-ring expands outwardly and contracts inwardly toward a previously sized austenitic configuration, thereby sealing against the protruding sealing rings of the concentric tubes.

  3. O-Ring sealing arrangements for ultra-high vacuum systems

    DOEpatents

    Kim, Chang-Kyo; Flaherty, Robert

    1981-01-01

    An all metal reusable O-ring sealing arrangement for sealing two concentric tubes in an ultra-high vacuum system. An O-ring of a heat recoverable alloy such as Nitinol is concentrically positioned between protruding sealing rings of the concentric tubes. The O-ring is installed between the tubes while in a stressed martensitic state and is made to undergo a thermally induced transformation to an austenitic state. During the transformation the O-ring expands outwardly and contracts inwardly toward a previously sized austenitic configuration, thereby sealing against the protruding sealing rings of the concentric tubes.

  4. Multiple internal seal ring micro-electro-mechanical system vacuum packaging method

    NASA Technical Reports Server (NTRS)

    Hayworth, Ken J. (Inventor); Yee, Karl Y. (Inventor); Shcheglov, Kirill V. (Inventor); Bae, Youngsam (Inventor); Wiberg, Dean V. (Inventor); Challoner, A. Dorian (Inventor); Peay, Chris S. (Inventor)

    2008-01-01

    A Multiple Internal Seal Ring (MISR) Micro-Electro-Mechanical System (MEMS) vacuum packaging method that hermetically seals MEMS devices using MISR. The method bonds a capping plate having metal seal rings to a base plate having metal seal rings by wafer bonding the capping plate wafer to the base plate wafer. Bulk electrodes may be used to provide conductive paths between the seal rings on the base plate and the capping plate. All seals are made using only metal-to-metal seal rings deposited on the polished surfaces of the base plate and capping plate wafers. However, multiple electrical feed-through metal traces are provided by fabricating via holes through the capping plate for electrical connection from the outside of the package through the via-holes to the inside of the package. Each metal seal ring serves the dual purposes of hermetic sealing and providing the electrical feed-through metal trace.

  5. Permanent seal ring for a nuclear reactor cavity

    SciTech Connect

    Hankinson, M.F.; Marshall, J.R.

    1988-05-31

    A nuclear reactor containment arrangement is described including: a. a reactor vessel which thermally expands and contracts during cyclic operation of the reactor and which has a peripheral wall; b. a containment wall spaced apart from and surrounding the peripheral wall of the reactor vessel and defining an annular thermal expansion gap therebetween for accommodating thermal expansion; and c. an annular ring seal which sealingly engages and is affixed to and extends between the peripheral wall of the reactor vessel and the containment wall.

  6. Mercury and Selenium Balance in Endangered Saimaa Ringed Seal Depend on Age and Sex.

    PubMed

    Lyytikäinen, Merja; Pätynen, Juuso; Hyvärinen, Heikki; Sipilä, Tero; Kunnasranta, Mervi

    2015-10-01

    The endangered Saimaa ringed seal (Pusa hispida saimensis) is exposed to relatively high concentrations of mercury (Hg) in freshwaters poor in selenium (Se), a known antagonist of Hg. The impact of age and sex on the bioaccumulation of Hg and Se was studied by analyzing liver, muscle, and hair samples from seals of different age groups. Adult females were found to accumulate significantly more Hg in the liver (with ca. 60% as HgSe), and less Hg in the muscles compared to adult males, which may be explained by accelerated metabolism during gestation and lactation. In adult seals, molar Se:Hg ratios in the muscles fall below one, which is considered a threshold for the emergence of adverse effects. As a result, Saimaa ringed seals may be at risk of developing health and reproductive problems. According to mass balance calculations, the pups are exposed to considerable amounts (μg/d) of mercury during gestation, although lactation is their main exposure route. In lanugo pups, Hg concentrates in the hair, and molting serves as a main detoxification route. For other age groups, demethylation followed by the formation of HgSe is the main detoxification route, and the demethylation capability develops in pups by the time of weaning. PMID:26372071

  7. Influence analysis of secondary O-ring seals in dynamic behavior of spiral groove gas face seals

    NASA Astrophysics Data System (ADS)

    Hu, Songtao; Huang, Weifeng; Liu, Xiangfeng; Wang, Yuming

    2016-05-01

    The current research on secondary O-ring seals used in mechanical seals has begun to focus on their dynamic properties. However, detailed analysis of the dynamic properties of O-ring seals in spiral groove gas face seals is lacking. In particular a transient study and a difference analysis of steady-state and transient performance are imperative. In this paper, a case study is performed to gauge the effect of secondary O-ring seals on the dynamic behavior (steady-state performance and transient performance) of face seals. A numerical finite element method (FEM) model is developed for the dynamic analysis of spiral groove gas face seals with a flexibly mounted stator in the axial and angular modes. The rotor tilt angle, static stator tilt angle and O-ring damping are selected to investigate the effect of O-ring seals on face seals during stable running operation. The results show that the angular factor can be ignored to save time in the simulation under small damping or undamped conditions. However, large O-ring damping has an enormous effect on the angular phase difference of mated rings, affecting the steady-state performance of face seals and largely increasing the possibility of face contact that reduces the service life of face seals. A pressure drop fluctuation is carried out to analyze the effect of O-ring seals on the transient performance of face seals. The results show that face seals could remain stable without support stiffness and O-ring damping during normal stable operation but may enter a large-leakage state when confronting instantaneous fluctuations. The oscillation-amplitude shortening effect of O-ring damping on the axial mode is much greater than that on the angular modes and O-ring damping prefers to cater for axial motion at the cost of angular motion. This research proposes a detailed dynamic-property study of O-ring seals in spiral groove gas face seals, to assist in the design of face seals.

  8. Influence analysis of secondary O-ring seals in dynamic behavior of spiral groove gas face seals

    NASA Astrophysics Data System (ADS)

    Hu, Songtao; Huang, Weifeng; Liu, Xiangfeng; Wang, Yuming

    2016-04-01

    The current research on secondary O-ring seals used in mechanical seals has begun to focus on their dynamic properties. However, detailed analysis of the dynamic properties of O-ring seals in spiral groove gas face seals is lacking. In particular a transient study and a difference analysis of steady-state and transient performance are imperative. In this paper, a case study is performed to gauge the effect of secondary O-ring seals on the dynamic behavior (steady-state performance and transient performance) of face seals. A numerical finite element method (FEM) model is developed for the dynamic analysis of spiral groove gas face seals with a flexibly mounted stator in the axial and angular modes. The rotor tilt angle, static stator tilt angle and O-ring damping are selected to investigate the effect of O-ring seals on face seals during stable running operation. The results show that the angular factor can be ignored to save time in the simulation under small damping or undamped conditions. However, large O-ring damping has an enormous effect on the angular phase difference of mated rings, affecting the steady-state performance of face seals and largely increasing the possibility of face contact that reduces the service life of face seals. A pressure drop fluctuation is carried out to analyze the effect of O-ring seals on the transient performance of face seals. The results show that face seals could remain stable without support stiffness and O-ring damping during normal stable operation but may enter a large-leakage state when confronting instantaneous fluctuations. The oscillation-amplitude shortening effect of O-ring damping on the axial mode is much greater than that on the angular modes and O-ring damping prefers to cater for axial motion at the cost of angular motion. This research proposes a detailed dynamic-property study of O-ring seals in spiral groove gas face seals, to assist in the design of face seals.

  9. Polychlorinated biphenyl profiles in ringed seals (Pusa Hispida) reveal historical contamination by a military radar station in Labrador, Canada.

    PubMed

    Brown, Tanya M; Fisk, Aaron T; Helbing, Caren C; Reimer, Ken J

    2014-03-01

    Significant amounts of soil contaminated with polychlorinated biphenyls (PCBs) were discovered at a military radar station in Saglek Bay, Labrador, Canada, in 1996. Subsequent work showed elevated PCB concentrations in local marine sediments, in the benthic-associated food web, and in some ringed seals (Pusa hispida). The benthic-associated food web clearly reflected local PCB contamination, but the high PCB concentrations found in some ringed seals remained unexplained. In the present study, the authors assess the extent to which this local PCB source at Saglek Bay is contributing to the contamination of ringed seals in northern Labrador. Among 63 ringed seals sampled along the northern Labrador coast, 5 (8%) had PCB levels that were higher than recorded anywhere else in the Canadian Arctic. In addition, compared with seals exhibiting a long-range signal, 45% and 60% of subadults and adult males, respectively, exhibited heavier PCB congener profiles as characterized by principal components analysis, >1.6-fold higher PCB/organochlorine pesticides ratios, and higher PCB concentration-weighted average log octanol-water partition coefficient values, consistent with a local source. Despite the spatially confined nature of contaminated sediments in Saglek Bay, the influence of this PCB source is not inconsequential; PCB concentrations in locally contaminated adult males are 2-fold higher than concentrations in those exposed only to long-range PCB sources and exceed an established threshold of 1.3 mg/kg for adverse health effects in seals. PMID:24273070

  10. Temporal trends of hexabromocyclododecane, polybrominated diphenyl ethers and polychlorinated biphenyls in ringed seals from East greenland.

    PubMed

    Vorkamp, Katrin; Rigét, Frank F; Bossi, Rossana; Dietz, Rune

    2011-02-15

    Concentrations of hexabromocyclododecane (HBCD) were determined in a combination of archived and fresh blubber samples of juvenile ringed seals from East Greenland collected between 1986 and 2008. α-HBCD was the only diastereoisomer consistently above levels of quantification and showed a significant log-linear (exponential) increase from 2.0 to 8.7 ng/g lipid weight (median concentrations) with an annual rate of +6.1%. The concentrations were up to several orders of magnitude lower than those reported for marine mammals from industrialized areas. Previously presented time trends on polybrominated diphenyl ethers (PBDEs) and polychlorinated biphenyls (PCBs) have been extended with new data for 2006 and 2008. ΣPBDE in juvenile seals was the only parameter with a slight upward trend, however, dependent on the low 1986 concentration. Removing this data point resulted in a downward trend, which also was found for adult seals with a time trend starting in 1994. ΣPCB decreased significantly in juvenile seals, again due to the 1986 value, while no trend was found for the adult animals. This indicates stagnating PCB concentrations at a relatively high level, in some cases possibly exceeding tolerable daily intake rates for seal blubber as traditional Arctic food items. PMID:21247098

  11. Wafer-level packaging with compression-controlled seal ring bonding

    SciTech Connect

    Farino, Anthony J

    2013-11-05

    A device may be provided in a sealed package by aligning a seal ring provided on a first surface of a first semiconductor wafer in opposing relationship with a seal ring that is provided on a second surface of a second semiconductor wafer and surrounds a portion of the second wafer that contains the device. Forcible movement of the first and second wafer surfaces toward one another compresses the first and second seal rings against one another. A physical barrier against the movement, other than the first and second seal rings, is provided between the first and second wafer surfaces.

  12. Giardia duodenalis and Cryptosporidium spp. in the intestinal contents of ringed seals (Phoca hispida) and bearded seals (Erignathus barbatus) in Nunavik, Quebec, Canada.

    PubMed

    Dixon, Brent R; Parrington, Lorna J; Parenteau, Monique; Leclair, Daniel; Santín, Mónica; Fayer, Ronald

    2008-10-01

    The prevalence of Giardia duodenalis and Cryptosporidium spp. was determined for ringed and bearded seals harvested for food in the Nunavik region in northern Quebec, Canada. Flow cytometric results demonstrated that G. duodenalis was present in the intestinal contents of 80% of the ringed seals and 75% of the bearded seals tested, while Cryptosporidium spp. were present in 9% of the ringed seals and none of the bearded seals. Prevalence of both parasites was highest in animals less than 1 yr of age. Giardia sp. isolates from ringed seals were identified as G. duodenalis Assemblage B, which is commonly identified in human infections. The high prevalence of G. duodenalis in ringed seals, and the presence of Assemblage B in these animals, highlights the potential for zoonotic transmission to the Inuit people, who consume dried seal intestines and uncooked seal meat. PMID:18576814

  13. Design improvement of a pump wear ring labyrinth seal

    NASA Technical Reports Server (NTRS)

    Rhode, David L.; Morrison, G. L.; Ko, S. H.; Waughtal, S. P.

    1987-01-01

    The investigation was successful in obtaining two improved designs for the impeller wear ring seal of the liquid hydrogen turbopump of interest. A finite difference computer code was extensively used in a parametric computational study in determining a cavity configuration with high flow resistance due to turbulence dissipation. These two designs, along with that currently used, were fabricated and tested. The improved designs were denoted Type O and Type S. The measurements showed that Type O and Type S given 67 and 30 percent reduction in leakage over the current design, respectively. It was found that the number of cavities, the step height and the presence of a small stator groove are quite important design features. Also, the tooth thickness is of some significance. Finally, the tooth height and an additional large cavity cut out from the stator (upstream of the step) are of negligible importance.

  14. Genetic characterization of Cryptosporidium isolates from ringed seals (Phoca hispida) in Northern Quebec, Canada.

    PubMed

    Santín, Mónica; Dixon, Brent R; Fayert, Ronald

    2005-06-01

    This study reports the molecular characterization of Cryptosporidium spp. isolates identified from intestinal contents of ringed seals (Phoca hispida) from Nunavik (Quebec, Canada). Cryptosporidium spp. fragments of 18S rRNA, HSP-70, and actin loci were amplified by PCR from seal intestinal contents. PCR-positive specimens were sequenced and compared with other Cryptosporidium species and genotypes reported previously. Sequence analysis showed the presence of C. muris and 2 novel genotypes in ringed seals. PMID:16108576

  15. High-Pressure Hot-Gas Self-Acting Floating Ring Shaft Seal for Liquid Rocket Turbopumps. [tapered bore seals

    NASA Technical Reports Server (NTRS)

    Burcham, R. E.; Diamond, W. A.

    1980-01-01

    Design analysis, detail design, fabrication, and experimental evaluation was performed on two self acting floating ring shaft seals for a rocket engine turbopump high pressure 24132500 n/sq m (3500 psig) hot gas 533 K 9500 F) high speed 3142 rad/sec (30000 rmp) turbine. The initial design used Rayleigh step hydrodynamic lift pads to assist in centering the seal ring with minimum rubbing contact. The final design used a convergent tapered bore to provide hydrostatic centering force. The Rayleigh step design was tested for 107 starts and 4.52 hours total. The leakage was satisfactory; however, the design was not acceptable due to excessive wear caused by inadequate centering force and failure of the sealing dam caused by erosion damage. The tapered bore design was tested for 370 starts and 15.93 hours total. Satisfactory performance for the required life of 7.5 hours per seal was successfully demonstrated.

  16. Phagocytosis in pup and adult harbour, grey and harp seals.

    PubMed

    Frouin, Héloïse; Lebeuf, Michel; Hammill, Mike; Fournier, Michel

    2010-04-15

    Knowledge on pinniped immunology is still in its infancy. For instance, age-related and developmental aspects of the immune system in pinnipeds need to be better described. The present study examined the phagocytic activity and efficiency of harbour, grey and harp seal leukocytes. In the first part of the study, peripheral blood was collected from captive female harbour seals of various ages. Data showed an age-related decrease in phagocytosis in female harbour seals from sub-adult to adulthood. In the second part of the study, changes in phagocytosis were quantified during lactation in wild newborn harbour, grey and harp seals and in their mothers (harp and grey seals). In newborns of the same age, leukocytes of harbour and harp seals phagocytosed less than those of grey seal pups. The phagocytic activity and efficiency increased significantly from early to mid-lactation in newborn harbour seals, and from early to late lactation in newborn grey seals, which could suggest that the transfer of phagocytosis-promoting factor(s) in colostrum is an important feature of temporary protection for pups. In contrast, no changes in phagocytic activity and efficiency were observed in lactating females of the two seal species, harp and grey, examined. At late lactation, phagocytic activity in both grey and harp seal pups and phagocytic efficiency in grey seal pups were significantly higher than in their mothers. These results could reflect either the capacity of phagocytes of the newborn harp and grey seals to respond to pathogens. Results from this study suggest that the phagocytosis of the seal species examined is not fully developed at birth as it generally increases in pups during lactation. Thereafter, the phagocytic activity of seals appears to decrease throughout adulthood. PMID:19766324

  17. Amphibious hearing in ringed seals (Pusa hispida): underwater audiograms, aerial audiograms and critical ratio measurements.

    PubMed

    Sills, Jillian M; Southall, Brandon L; Reichmuth, Colleen

    2015-07-01

    Ringed seals (Pusa hispida) are semi-aquatic marine mammals with a circumpolar Arctic distribution. In this study, we investigate the amphibious hearing capabilities of ringed seals to provide auditory profiles for this species across the full range of hearing. Using psychophysical methods with two trained ringed seals, detection thresholds for narrowband signals were measured under quiet, carefully controlled environmental conditions to generate aerial and underwater audiograms. Masked underwater thresholds were measured in the presence of octave-band noise to determine critical ratios. Results indicate that ringed seals possess hearing abilities comparable to those of spotted seals (Phoca largha) and harbor seals (Phoca vitulina), and considerably better than previously reported for ringed and harp seals. Best sensitivity was 49 dB re. 1 µPa (12.8 kHz) in water, and -12 dB re. 20 µPa (4.5 kHz) in air, rivaling the acute hearing abilities of some fully aquatic and terrestrial species in their respective media. Critical ratio measurements ranged from 14 dB at 0.1 kHz to 31 dB at 25.6 kHz, suggesting that ringed seals--like other true seals--can efficiently extract signals from background noise across a broad range of frequencies. The work described herein extends similar research on amphibious hearing in spotted seals recently published by the authors. These parallel studies enhance our knowledge of the auditory capabilities of ice-living seals, and inform effective management strategies for these and related species in a rapidly changing Arctic environment. PMID:25987727

  18. Microsatellite variation in ringed seals (Phoca hispida): genetic structure and history of the Baltic Sea population.

    PubMed

    Palo, J U; Mäkinen, H S; Helle, E; Stenman, O; Väinölä, R

    2001-05-01

    Genetic variability and population structure of Baltic ringed seals and an Arctic reference population were assessed using eight microsatellite loci. Ringed seals colonized the Baltic Sea basin soon after deglaciation 11 500 years ago and are supposed to have remained largely isolated from the main Arctic stock since then, approximately 1000 generations. In the 1900s the Baltic population declined rapidly, and is now confined to three distinct breeding areas, with N < 6000 seals altogether. Microsatellite heterozygosity in ringed seals was higher than that in the closely related, boreal harbour seal and grey seal, for which the markers were initially developed. This is plausibly attributed to an overall greater population (species) size of ringed seals during the Quaternary. Allele frequency differentiation between the Baltic and Arctic ringed seals, conventionally treated as different subspecies, was weak. Assuming complete isolation, the divergence (FST=0.023) would imply a notably high postglacial effective population size, approximately 20 000 for the Baltic population. The isolation assumption however, seems unrealistic in the light of the data: a coalescent-based simulation approach to the likelihood of alternative demographic histories clearly favoured a scenario with recurrent gene flow to the Baltic, over one of complete isolation (drift only). Within the Baltic Sea, no differentiation was found between the Gulf of Finland and the Gulf of Bothnia breeding areas; the recent population decline and split have not yet affected the inbreeding levels of the disjunct breeding stocks. PMID:11554977

  19. O-ring sealing verification for the space shuttle redesign solid rocket motor

    NASA Technical Reports Server (NTRS)

    Lach, Cynthia L.

    1989-01-01

    As a part of the redesign of the Space Shuttle Solid Rocket Motor, the field and nozzle-to-case joints were redesigned to minimize the dynamic flexure caused by internal motor pressurization during ignition. The O-ring seals and glands for the joints were designed to accommodate both structural deflections and to promote pressure assistance. A test program was conducted to determine if a fluorocarbon elastomeric O-ring could meet this criteria in the redesigned gland. Resiliency tests were used to investigate the O-ring response to gap motion while static seal tests were used to verify design criteria of pressure assistance for sealing. All tests were conducted in face seal fixtures mounted in servo-hydraulic test machines. The resiliency of the O-ring was found to be extremely sensitive to the effects of temperature. The External Tank/Solid Rocket Booster attach strut loads had a negligible affect on the ability of the O-ring to track the simulated SRB field joint deflection. In the static pressure-assisted seal tests, as long as physical contact was maintained between the O-ring and the gland sealing surface, pressure assistance induced instantaneous sealing.

  20. Leakage test concerns for packagings with three-O-ring closure seals

    SciTech Connect

    Oras, J.J.; Towell, R.H.; Wangler, M.E.

    1997-07-01

    Recent radioactive packagings with three-O-ring closure seals, the middle O-ring being the containment seal, have the potential for false positive results from leakage rate tests. The volume between the containment O-ring and the inner O-ring is used for the helium gas required for the leakage rate tests, to reduce both the amount of helium used and the time for the tests. False positive results can be caused by either a large leakage in the containment sea/l or a leakage in the inner seal. This paper describes the problem, together with possible solutions/areas that need to be addressed in a Safety Analysis Report for Packaging.

  1. Split ring floating air riding seal for a turbine

    DOEpatents

    Mills, Jacob A

    2015-11-03

    A floating air riding seal for a gas turbine engine with a rotor and a stator, an annular piston chamber with an axial moveable annular piston assembly within the annular piston chamber, an annular cavity formed on the annular piston assembly that faces a seal surface on the rotor, and a central passage connecting the annular cavity to the annular piston chamber to supply compressed air to the seal face, where the annular piston assembly is a split piston assembly to maintain a tight seal as coning of the rotor disk occurs.

  2. Fluid-solid interaction model for hydraulic reciprocating O-ring seals

    NASA Astrophysics Data System (ADS)

    Liao, Chuanjun; Huang, Weifeng; Wang, Yuming; Suo, Shuangfu; Liu, Ying

    2013-01-01

    Elastohydrodynamic lubrication characteristics of hydraulic reciprocating seals have significant effects on sealing and tribology performances of hydraulic actuators, especially in high parameter hydraulic systems. Only elastic deformations of hydraulic reciprocating seals were discussed, and hydrodynamic effects were neglected in many studies. The physical process of the fluid-solid interaction effect did not be clearly presented in the existing fluid-solid interaction models for hydraulic reciprocating O-ring seals, and few of these models had been simultaneously validated through experiments. By exploring the physical process of the fluid-solid interaction effect of the hydraulic reciprocating O-ring seal, a numerical fluid-solid interaction model consisting of fluid lubrication, contact mechanics, asperity contact and elastic deformation analyses is constructed with an iterative procedure. With the SRV friction and wear tester, the experiments are performed to investigate the elastohydrodynamic lubrication characteristics of the O-ring seal. The regularity of the friction coefficient varying with the speed of reciprocating motion is obtained in the mixed lubrication condition. The experimental result is used to validate the fluid-solid interaction model. Based on the model, The elastohydrodynamic lubrication characteristics of the hydraulic reciprocating O-ring seal are presented respectively in the dry friction, mixed lubrication and full film lubrication conditions, including of the contact pressure, film thickness, friction coefficient, liquid film pressure and viscous shear stress in the sealing zone. The proposed numerical fluid-solid interaction model can be effectively used to analyze the operation characteristics of the hydraulic reciprocating O-ring seal, and can also be widely used to study other hydraulic reciprocating seals.

  3. Trends of perfluorochemicals in Greenland ringed seals and polar bears: indications of shifts to decreasing trends.

    PubMed

    Rigét, Frank; Bossi, Rossana; Sonne, Christian; Vorkamp, Katrin; Dietz, Rune

    2013-11-01

    Time-series of perfluorinated alkylated substances (PFASs) in East Greenland polar bears and East and West Greenland ringed seals were updated in order to deduce whether a response to the major reduction in perfluoroalkyl production in the early 2000s had occurred. Previous studies had documented an exponential increase of perfluorooctane sulphonate (PFOS) in liver tissue from both species. In the present study, PFOS was still the far most dominant compound constituting 92% (West Greenland ringed seals), 88% (East Greenland ringed seals) and 85% (East Greenland polar bears). The PFOS concentrations increased up to 2006 with doubling times of approximately 6 years for the ringed seal populations and 14 years in case of polar bears. Since then a rapid decrease has occurred with clearing half-lives of approximately 1, 2 and 4 years, respectively. In polar bears perfluorohexane sulphonate (PFHxS) and perfluorooctane sulphonamide (PFOSA) also showed decreasing trends in recent years as do perfluorodecanoic acid (PFDA) and perfluoroundecanoic acid (PFUnA). For the West Greenland ringed seal population perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA), PFDA and PFUnA peaked in the mid 2000s, whereas PFNA, PFDA and PFUnA in the East Greenland population have been stable or increasing in recent years. The peak of PFASs in Greenland ringed seals and polar bears occurred at a later time than in Canadian seals and polar bears and considerably later than observed in seal species from more southern latitudes. We suggest that this could be explained by the distance to emission hot-spots and differences in long-range transport to the Arctic. PMID:24025534

  4. Automated Inspection of the RSRM Case O-Ring Seal Surface

    NASA Technical Reports Server (NTRS)

    ODell, Keith P.; McCool, Alex (Technical Monitor)

    2001-01-01

    An automated inspection system has been developed to inspect the o-ring sealing surfaces on the Space Shuttle reusable solid rocket motor (RSRM) case segment joints. A laser digitizing system is used to create a three dimensional map of the o-ring sealing surfaces. This data is analyzed for any irregularities, which are noted for further inspection and disposition. This paper describes both the hardware and the software used to gather data as well as the methods developed to analyze the data. The RSRM is assembled from four casting segments. Each of the field joints between these segments is sealed with three o-rings. These o-rings are critical for the proper operation of the motor. After launch the booster segments are recovered and reused. As part of the refurbishment process the o-ring sealing surfaces are inspected for any irregularities. The system developed uses a combination of commercial and customized hardware and software. The system uses two computer systems in a real time environment to control a laser, an XYZ precision table, and case rotation and position information. The system is capable of inspecting both the tang end and the clevis end of the RSRM field joint. The o-ring grooves and flat sealing surfaces are inspected.

  5. Leakage testing of packagings with three-O-ring closure seals

    SciTech Connect

    Oras, J.J.; Towell, R.H.; Wangler, M.E.

    1997-10-01

    Both the American National Standard for Radioactive Materials--Leakage Tests on Packages for Shipment (ANSI N14.5) and the ISO 12807:1996 Safe Transport of Radioactive Materials--Leakage Testing on Packages provide guidance for leakage rate testing to show that a particular packaging complies with regulatory requirements; both also provide guidance for determining appropriate acceptance criteria. Recent radioactive packaging designs have incorporated three-O-ring closure seals, the middle O-ring being the containment seal. These designs have the potential for false positive results in leakage rate tests. The volume between the containment O-ring and the inner O-ring is used for the helium gas required for the leakage rate tests, in order to reduce both the amount of helium used and the time required to conduct the tests. A leak detector samples the evacuated volume between the outer O-ring and the containment O-ring. False positive results can have two causes: a large leakage in the containment seal or leakage in the inner seal. This paper describes the problem, together with possible solutions and areas that should be addressed in a Safety Analysis Report for Packaging (SARP) before a particular packaging design can be certified for transport. Ultimately, the SARP should provide justification that the requirements for leakage rate testing procedures, including the length of time needed to conduct the tests, will ensure that the containment closure seal is properly tested.

  6. Persistent organic pollutants in Alaskan ringed seal (Phoca hispida) and walrus (Odobenus rosmarus) blubber

    USGS Publications Warehouse

    Kucklick, J.R.; Krahn, M.M.; Becker, P.R.; Porter, B.J.; Schantz, M.M.; York, G.S.; O'Hara, T. M.; Wise, S.A.

    2006-01-01

    Since 1987, the Alaska Marine Mammal Tissue Archival Project (AMMTAP) has collected tissues from 18 marine mammal species. Specimens are archived in the National Institute of Standards and Technology's National Biomonitoring Specimen Bank (NIST-NBSB). AMMTAP has collected blubber, liver and/or kidney specimens from a number of ringed seals (Phoca hispida) from the areas near Nome and Barrow, Alaska and walruses (Odobenus rosmarus) from several locations in the Bering Sea. Thirty-three ringed seal and 15 walrus blubber samples from the NIST-NBSB were analyzed for persistent organic pollutants (POPs). The compounds determined included PCBs (28 congeners or congener groups), DDT and related compounds, hexachlorobenzene (HCB), hexachlorocyclohexane isomers (HCHs), chlordanes, dieldrin, and mirex. POP concentrations in ringed seal blubber were significantly higher in Barrow than in Nome when statistically accounting for the interaction of age and gender; HCB, however, was not statistically different between the two locations. Unlike males, POP concentrations and age were not significantly correlated in females probably as a result of lactational loss. POP concentrations in walrus blubber were lower than in ringed seal blubber for ??PCBs, chlordanes, and HCHs, but higher for dieldrin and mirex. POP concentrations in ringed seals and walrus from Alaska provide further evidence that the western Arctic tends to have lower or similar POP concentrations compared to the eastern Canadian Arctic. ?? The Royal Society of Chemistry 2006.

  7. Persistent organic pollutants in Alaskan ringed seal (Phoca hispida) and walrus (Odobenus rosmarus) blubber

    USGS Publications Warehouse

    Kucklick, John R.; Krahn, Margaret M.; Becker, Paul R.; Porter, Barbara J.; Schantz, Michele M.; York, Geoffrey S.; O'Hara, Todd M.; Wise, Stephen A.

    2006-01-01

    Since 1987, the Alaska Marine Mammal Tissue Archival Project (AMMTAP) has collected tissues from 18 marine mammal species. Specimens are archived in the National Institute of Standards and Technology's National Biomonitoring Specimen Bank (NIST-NBSB). AMMTAP has collected blubber, liver and/or kidney specimens from a number of ringed seals (Phoca hispida) from the areas near Nome and Barrow, Alaska and walruses (Odobenus rosmarus) from several locations in the Bering Sea. Thirty-three ringed seal and 15 walrus blubber samples from the NIST-NBSB were analyzed for persistent organic pollutants (POPs). The compounds determined included PCBs (28 congeners or congener groups), DDT and related compounds, hexachlorobenzene (HCB), hexachlorocyclohexane isomers (HCHs), chlordanes, dieldrin, and mirex. POP concentrations in ringed seal blubber were significantly higher in Barrow than in Nome when statistically accounting for the interaction of age and gender; HCB, however, was not statistically different between the two locations. Unlike males, POP concentrations and age were not significantly correlated in females probably as a result of lactational loss. POP concentrations in walrus blubber were lower than in ringed seal blubber for ΣPCBs, chlordanes, and HCHs, but higher for dieldrin and mirex. POP concentrations in ringed seals and walrus from Alaska provide further evidence that the western Arctic tends to have lower or similar POP concentrations compared to the eastern Canadian Arctic.

  8. Regulatory concerns for leakage testing of packagings with three O-ring closure seals

    SciTech Connect

    Oras, J.J.; Towell, R.H.; Wangler, M.E.

    1997-09-01

    The American National Standard for Radioactive Materials--Leakage Tests on Packages for Shipment (ANSI N14.5) provides guidance for leakage rate testing to show that a particular packaging complies with regulatory requirements and also provides guidance in determining appropriate acceptance criteria. Recent radioactive packagings designs have incorporated three O-ring closure seals, the middle O-ring being the containment seal. These designs have the potential for false positive results of leakage rate tests. The volume between the containment O-ring and the inner O-ring is used for the helium gas required for the leakage rate tests to reduce both the amount of helium used and the time required to conduct the tests. A leak detector samples the evacuated volume between the outer O-ring and the containment O-ring. False positive results can be caused in two ways, a large leakage in the containment seal or leakage in the inner seal. This paper will describe the problem together with possible solutions/areas that need to be addressed in a Safety Analysis Report for Packagings before a particular packaging design can be certified for transport.

  9. Aging of Weapon Seals – An Update on Butyl O-ring Issues

    SciTech Connect

    Wilson, Mark H.

    2011-07-13

    During testing under the Enhanced Surveillance Campaign in 2001, preliminary data detected a previously unknown and potentially serious concern with recently procured butyl o-rings on several programs. All butyl o-rings molded from a proprietary formulation throughout the period circa 1999 through 2001 had less than a full cure. Engineering judgment was that under curing is detrimental and could possibly lead to sub-optimum performance or, in the worst case, premature seal failure. An aging study was undertaken to ensure that suspect o-rings installed in the stockpile will retain sufficient sealing force for a minimum ten-year service life. A new prediction model developed for this study indicates suspect o-rings do not need to be replaced before the ten-year service life. Long-term testing results are reported on a yearly basis to validate the prediction model. This report documents the aging results for the period September 2002 to January 2011.

  10. Vibration and destabilizing effects of floating ring seals in compressors

    NASA Technical Reports Server (NTRS)

    Emerick, M. F.

    1982-01-01

    Operating experience on a compressor commissioned 12 years ago has presented an interesting history of sporadic increases in shaft vibration. Initial operation was satisfactory with low levels of vibration. However, after some time the shaft vibration level increased to several mils. Initially this was believed to be due to rotor unbalance from deposits formed in the passages due to process upsets. After cleaning up the rotor, operation was again increased. It was then found that the rotor vibration was primarily subsynchronous. Further investigation revealed that the original seal design was subject to wear and was no longer properly pressure balanced. A modified seal design was installed and it has operated successfully for the past six years.

  11. Effect of temperature and O-ring gland finish on sealing ability of Viton V747-75

    NASA Technical Reports Server (NTRS)

    Lach, Cynthia L.

    1993-01-01

    As a part of the redesign project of the Space Shuttle solid rocket motor (SRM) following the Challenger accident, the field joint was redesigned to minimize the relative joint motion caused by internal motor pressurization during ignition. The O-ring seals and glands for the field joint were designed both to accommodate structural deflections and to promote pressure-assisted sealing. Tests were conducted in various face seal fixtures to evaluate the ability of Viton V747-75 O-rings to seal for a range of temperatures and surface finishes of the redesigned O-ring gland. The effect of surface finish on the sealing performance and wear characteristics of the O-rings was evaluated during simulated launch conditions that included low-frequency vibrations, gap openings, and rapid pressurizations. The effect of contamination on the sealing performance was also investigated. The O-rings sealed throughout the 75 deg F leak check test and for the seal tests from 50 deg F to 120 deg F for the range of surface finishes investigated. Although abrasions were found in the O-rings from pressurization against the rougher finishes, these abrasions were not detrimental to sealing. Below 50 deg F, Viton V747-75 O-rings were insufficiently resilient to track the test gap opening.

  12. Assessment of two neglected effects in the analysis of an oil pumping ring seal

    NASA Technical Reports Server (NTRS)

    Keith, T. G.; Smith, P. J.

    1983-01-01

    Many factors have been found to affect the performance of a pumping ring seal. In this paper, two effects (elevated reservoir temperature and rod deformation), both heretofore neglected, are assessed through the use of a thermoelastohydrodynamic numerical model of the pumping ring. Elevated reservoir temperatures are found to result in an increase in the amount of lubricant pumped while deformation of the translating rod is shown to cause a reduction in the lubricant pumped.

  13. 77 FR 20773 - Endangered and Threatened Species; Proposed Threatened Status for Subspecies of the Ringed Seal

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-06

    ...) subspecies of ringed seals as threatened (75 FR 77476). On December 13, 2011, in consideration of substantial... deadline for the final listing determination to June 10, 2012 (FR 77466). At that time, we also announced... the initial comment period on the December 10, 2011 (75 FR 77476), proposed rule should not...

  14. O-ring tube fittings form leakproof seal in hydraulic systems

    NASA Technical Reports Server (NTRS)

    1966-01-01

    Leakproof fittings for hydraulic systems are designed to be welded to the ends of the tubing to be joined and mated to form a seal with one o-ring at the joint. Since the fittings are coupled at only one joint, they tend to be more reliable than standard fittings coupled at two joints.

  15. Performance Evaluation of O-Ring Seals in Model 9975 Packaging Assemblies (U)

    SciTech Connect

    Skidmore, Eric

    1998-12-28

    The Materials Consultation Group of SRTC has completed a review of existing literature and data regarding the useable service life of Viton{reg_sign} GLT fluoroelastomer O-rings currently used in the Model 9975 packaging assemblies. Although the shipping and transportation period is normally limited to 2 years, it is anticipated that these packages will be used for longer-term storage of Pu-bearing materials in KAMS (K-Area Materials Storage) prior to processing or disposition in the APSF (Actinide Packaging and Storage Facility). Based on the service conditions and review of available literature, Materials Consultation concludes that there is sufficient existing data to establish the technical basis for storage of Pu-bearing materials using Parker Seals O-ring compound V835-75 (or equivalent) for up to 10 years following the 2-year shipping period. Although significant physical deterioration of the O-rings and release of product is not expected, definite changes in physical properties will occur. However, due to the complex relationship between elastomer formulation, seal properties, and competing degradation mechanisms, the actual degree of property variation and impact upon seal performance is difficult to predict. Therefore, accelerated aging and/or surveillance programs are recommended to validate the assumptions outlined in this report and to assess the long-term performance of O-ring seals under actual service conditions. Such programs could provide a unique opportunity to develop nonexistent long-term performance data, as well as address storage extension issues if necessary.

  16. [Ecology of the ringed seal (Pusa hispida) from the Bering Strait in the late Holocene].

    PubMed

    Gorlova, E N; Krylovich, O A; Savinetskiĭ, A B; Khasanov, B F

    2012-01-01

    The combined use of analysis of stable isotopes and archeozoological methods with respect to bony material from an ancient Eskimo settlement (dated 2370-810 years ago) made it possible to reveal the main distinguishing features of ringed seal in the past. On the basis of the data obtained, we suppose that in the late Holocene in the water area of the Bering Strait, there were seals of two different ecotopes: those reproducing on fast ice and those on pack ice differing not only in habitats, but also in the proportion of different food items in the diet. The ringed seals caught by ancient Eskimos during their life had a mixed diet consisting of crustaceans and fish, but in most individuals, a shift towards fish eating was observed. No significant changes in the feeding related to spawning were recorded. The dependence of feeding on body size was shown: bigger, mature individuals occupied higher trophic positions. PMID:23136743

  17. Local contamination, and not feeding preferences, explains elevated PCB concentrations in Labrador ringed seals (Pusa hispida).

    PubMed

    Brown, Tanya M; Iverson, Sara J; Fisk, Aaron T; Macdonald, Robie W; Helbing, Caren C; Reimer, Ken J

    2015-05-15

    Polychlorinated biphenyls (PCBs) in high trophic level species typically reflect the contributions of myriad sources, such that source apportionment is rarely possible. The release of PCBs by a military radar station into Saglek Bay, Labrador contaminated the local marine food web. For instance, while heavier (higher chlorinated) PCB profiles in some ringed seals (Pusa hispida) were previously attributed to this local source, differences in feeding preferences among seals could not be ruled out as a contributing factor. Herein, similar fatty acid profiles between those seals with 'local' PCB profiles and those with 'long-range' or background profiles indicate little support for the possibility that differential feeding ecologies underlay the divergent PCB profiles. Ringed seals appeared to feed predominantly on zooplankton (Mysis oculata and Themisto libellula), followed by the dusky snailfish (Liparis gibbus), arctic cod (Boreogadus saida), and shorthorn sculpin (Myoxocephalus scorpius). Principal components analysis (PCA) and PCB homolog profiles illustrated the extent of contamination of the Saglek food web, which had very different (and much heavier) PCB profiles than those food web members contaminated by 'long-range' sources. Locally contaminated prey had PCB levels that were higher (2- to 544-fold) than prey contaminated by 'long-range' sources and exceeded wildlife consumption guidelines for PCBs. The application of multivariate analyses to two distinct datasets, including PCB congeners (n=50) and fatty acids (n=65), afforded the opportunity to clearly distinguish the contribution of locally-released PCBs to a ringed seal food web from those delivered via long-ranged transport. Results from the present study strongly suggest that habitat use rather than differences in prey selection is the primary mechanism explaining the divergent PCB patterns in Labrador ringed seals. PMID:25725460

  18. Transplacental Transfer of Polychlorinated Biphenyls, Polybrominated Diphenylethers, and Organochlorine Pesticides in Ringed Seals (Pusa hispida).

    PubMed

    Brown, T M; Ross, P S; Reimer, K J

    2016-01-01

    The transplacental transfer of persistent organic pollutants in marine mammals takes place at a formative developmental period, thereby exposing the fetus to endocrine-disrupting compounds. We evaluated the transplacental transfer of polychlorinated biphenyls (PCBs), polybrominated diphenylethers (PBDEs), and organochlorine pesticides (OCPs) in five pregnant ringed seals in Northern Labrador, Canada. PCBs, PBDEs, and OCPs were transferred from the mother to the fetus with average concentrations in the fetuses ranging from 0.3 ng/g lipid weight (lw) of mirex to 94 ng/g lw of PCBs. The average percent transferred to the blubber in the fetus was very low with <0.02 % for each of the compounds studied. Based on relationships observed, transfer for full-term fetuses is estimated to range from 0.03 to 0.27 %. Log K(ow) explained the transfer of PCBs (r (2) = 0.67, p < 0.001) and OCPs (r (2) = 0.62, p < 0.001) with those PCB congeners and OCP compounds having a log K(ow) of <6.0 and 4.6, respectively, because they are preferentially transferred to the fetus. Adult females transferred a contaminant mixture to their fetuses, which correlated with estimated fetal age (p < 0.001; r (2) = 0.697), with younger fetuses showing a greater proportion of compounds with low K(ow) compared with later-term fetuses. The implications for the prenatal exposure to these developmental toxicants remains unknown because current toxicity thresholds in marine mammals have only been derived from juveniles or adults. PMID:26142122

  19. Persistent organochlorine pollutants in ringed seals and polar bears collected from northern Alaska

    USGS Publications Warehouse

    Kucklick, J.R.; Struntz, W.D.J.; Becker, P.R.; York, G.W.; O'Hara, T. M.; Bohonowych, J.E.

    2002-01-01

    Blubber samples from ringed seal (Phoca hispida; n=8) and polar bear subcutaneous fat (Ursus maritimus; n=5) were collected near Barrow, Alaska in 1996 as part of the Alaska Marine Mammal Tissue Archival Project (AMMTAP) and retained in the National Biomonitoring Specimen Bank at the National Institute of Standards and Technology in Gaithersburg, Maryland (USA). The samples were analyzed for a variety of persistent organochlorine pollutants (POPs) including polychlorinated biphenyls (PCBs), hexachlorocyclohexanes (HCHs), chlordane and metabolites, hexachlorobenzene (HCB) and DDTs and metabolites. The geometric mean, on a wet mass basis, of ??PCBs (sum of 29 congeners and congener groups) were 732??282 ng/g (1 S.D.) in seals and 3395??1442 ng/g in polar bears. The geometric mean of ??DDTs, ??HCHs (??-, ??- and ??- HCH) and HCB concentrations (wet mass basis) in seals and bears were 562??261 ng/g vs. 74.8??39 ng/g, 380??213 ng/g vs. 515 ng/g, and 17.4??10.1 ng/g vs. 183??153 ng/g, respectively. The geometric mean sum of chlordane (??chlordane, sum of cis- and trans-chlordane, cis- and trans-nonachlor, oxychlordane and heptachlor epoxide) and dieldrin concentrations in ringed seals and polar bears were 753??617 ng/g vs. 720??315 ng/g and 38.6??22.8 ng/g vs. 130??65 ng/g, respectively. Apparent bioaccumulation factors (polar bear/ringed seal POP concentrations) were lower in the animals sampled near Barrow, Alaska than in those from locations in the Canadian Arctic. This suggests that polar bears are also preying on marine mammals from lower trophic levels than the ringed seals with correspondingly lower organochlorine levels, such as bowhead whale carcasses. PCB congener patterns in the samples demonstrated the metabolism of certain PCB congeners in the polar bear relative to the ringed seal in agreement with previous studies. Regional comparisons of animals collected in Alaska and Arctic Canada are presented. Copyright ?? 2002 Elsevier Science B.V.

  20. The ringed seal's last refuge and the importance of snow cover

    NASA Astrophysics Data System (ADS)

    Kelly, B. P.; Bitz, C. M.

    2010-12-01

    Ringed seals are strongly adapted to inhabiting seasonal ice cover throughout the Arctic Ocean, marginal seas, and some freshwater lakes. Their distribution has expanded and contracted with northern hemisphere ice cover and is expected to mirror declining ice cover in coming decades. Ringed seals require snow cover to provide shelter from extreme cold and from predators, and the southern extent of their range corresponds to the latitudes to which snow cover—sufficient to form and maintain subnivean lairs—extends. The lairs are especially critical to the survival of pups born and nursed under the snow in late March through May. Snow drifts 50 cm or deeper are necessary for lair occupation, and field measurements indicate that such drifting occurs only where average snow depths (on flat ice) exceed 20 cm. When snow depths are less, ringed seal pups freeze in their lairs and are vulnerable to predation by carnivores and birds. As the climate warms, winter precipitation is expected to increase in the Arctic Ocean, potentially favoring formation and occupation of lairs. At the same time, increasingly late ice formation is expected to decrease the overall accumulation of snow, an effect exacerbated by the high fraction of annual snow fall that occurs in autumn. Early snow melts also contribute to pup mortality and are likely to increase as the climate warms. We forecast April snow depths on Arctic sea ice through the year 2100 in seven runs of CCSM3. Despite predicted increases in winter precipitation in the Arctic, the model forecasted that the accumulation of snow on sea ice will decrease by almost 50% in this century. The timing of the onset of snow melt changes little in the projections, but the shallower snow pack will melt more quickly in the warmer climate. In almost all portions of the range, average snow depths are expected to be less than 20 cm and inadequate for successful rearing of ringed seal young by the end of the century and—in many locations

  1. Ringed Seal Search for Global Optimization via a Sensitive Search Model.

    PubMed

    Saadi, Younes; Yanto, Iwan Tri Riyadi; Herawan, Tutut; Balakrishnan, Vimala; Chiroma, Haruna; Risnumawan, Anhar

    2016-01-01

    The efficiency of a metaheuristic algorithm for global optimization is based on its ability to search and find the global optimum. However, a good search often requires to be balanced between exploration and exploitation of the search space. In this paper, a new metaheuristic algorithm called Ringed Seal Search (RSS) is introduced. It is inspired by the natural behavior of the seal pup. This algorithm mimics the seal pup movement behavior and its ability to search and choose the best lair to escape predators. The scenario starts once the seal mother gives birth to a new pup in a birthing lair that is constructed for this purpose. The seal pup strategy consists of searching and selecting the best lair by performing a random walk to find a new lair. Affected by the sensitive nature of seals against external noise emitted by predators, the random walk of the seal pup takes two different search states, normal state and urgent state. In the normal state, the pup performs an intensive search between closely adjacent lairs; this movement is modeled via a Brownian walk. In an urgent state, the pup leaves the proximity area and performs an extensive search to find a new lair from sparse targets; this movement is modeled via a Levy walk. The switch between these two states is realized by the random noise emitted by predators. The algorithm keeps switching between normal and urgent states until the global optimum is reached. Tests and validations were performed using fifteen benchmark test functions to compare the performance of RSS with other baseline algorithms. The results show that RSS is more efficient than Genetic Algorithm, Particles Swarm Optimization and Cuckoo Search in terms of convergence rate to the global optimum. The RSS shows an improvement in terms of balance between exploration (extensive) and exploitation (intensive) of the search space. The RSS can efficiently mimic seal pups behavior to find best lair and provide a new algorithm to be used in global

  2. Ringed Seal Search for Global Optimization via a Sensitive Search Model

    PubMed Central

    Saadi, Younes; Yanto, Iwan Tri Riyadi; Herawan, Tutut; Balakrishnan, Vimala; Chiroma, Haruna; Risnumawan, Anhar

    2016-01-01

    The efficiency of a metaheuristic algorithm for global optimization is based on its ability to search and find the global optimum. However, a good search often requires to be balanced between exploration and exploitation of the search space. In this paper, a new metaheuristic algorithm called Ringed Seal Search (RSS) is introduced. It is inspired by the natural behavior of the seal pup. This algorithm mimics the seal pup movement behavior and its ability to search and choose the best lair to escape predators. The scenario starts once the seal mother gives birth to a new pup in a birthing lair that is constructed for this purpose. The seal pup strategy consists of searching and selecting the best lair by performing a random walk to find a new lair. Affected by the sensitive nature of seals against external noise emitted by predators, the random walk of the seal pup takes two different search states, normal state and urgent state. In the normal state, the pup performs an intensive search between closely adjacent lairs; this movement is modeled via a Brownian walk. In an urgent state, the pup leaves the proximity area and performs an extensive search to find a new lair from sparse targets; this movement is modeled via a Levy walk. The switch between these two states is realized by the random noise emitted by predators. The algorithm keeps switching between normal and urgent states until the global optimum is reached. Tests and validations were performed using fifteen benchmark test functions to compare the performance of RSS with other baseline algorithms. The results show that RSS is more efficient than Genetic Algorithm, Particles Swarm Optimization and Cuckoo Search in terms of convergence rate to the global optimum. The RSS shows an improvement in terms of balance between exploration (extensive) and exploitation (intensive) of the search space. The RSS can efficiently mimic seal pups behavior to find best lair and provide a new algorithm to be used in global

  3. Abundance of ringed seals (Pusa hispida) in the fjords of Spitsbergen, Svalbard, during the peak molting period

    USGS Publications Warehouse

    Krafft, B.A.; Kovacs, K.M.; Andersen, M.; Aars, J.; Lydersen, C.; Ergon, T.; Haug, T.

    2006-01-01

    Ringed seal (Pusa hispida) abundance in Spitsbergen, Svalbard, was estimated during the peak molting period via aerial, digital photographic surveys. A total of 9,145 images, covering 41.7%?100% of the total fast-ice cover (1,496 km2) of 18 different fjords and bays, were inspected for the presence of ringed seals. A total of 1,708 seals were counted, and when accounting for ice areas that were not covered by images, a total of 3,254 (95% CI: 3,071?3,449) ringed seals were estimated to be hauled out during the surveys. Extensive behavioral data from radio-tagged ringed seals (collected in a companion study) from one of the highest density fjords during the molting period were used to create a model that predicts the proportion of seals hauled out on any given date, time of day, and under various meteorological conditions. Applying this model to the count data from each fjord, we estimated that a total of 7,585 (95% CI: 6,332-9,085) ringed seals were present in the surveyed area during the peak molting period. Data on interannual variability in ringed seal abundance suggested higher numbers of seals in Van Keulenfjorden in 2002 compared to 2003, while other fjords with very stable ice cover showed no statistical differences. Poor ice conditions in general in 2002 probably resulted in seals from a wide area coming to Van Keulenfjorden (a large fjord with stable ice in 2002). The total estimated number of ringed seals present in the study area at the time of the survey must be regarded as a population index, or at least a minimum estimate for the area, because it does not account for individuals leaving and arriving, which might account for a considerable number of animals. The same situation is likely the case for many other studies reporting aerial census data for ringed seals. To achieve accurate estimates of population sizes from aerial surveys, more extensive knowledge of ringed seal behavior will be required.

  4. Spatial and temporal trends in perfluoroalkyl substances (PFASs) in ringed seals (Pusa hispida) from Svalbard.

    PubMed

    Routti, Heli; Gabrielsen, Geir Wing; Herzke, Dorte; Kovacs, Kit M; Lydersen, Christian

    2016-07-01

    This study investigates concentrations of perfluoroalkyl carboxylates (PFCAs), perfluoroalkyl sulfonates (PFSAs) and perfluoroalkane sulfonamides (FASA) in plasma from ringed seals sampled in the period 1990-2010 (n = 71) in Svalbard, Norway. Perfluorooctane sulfonate was dominant among the perfluoroalkyl substances. PFCAs were dominated by perfluoroundecanoate followed by perfluorononanoate. C4C8 PFCAs and perfluorooctane sulfonamide (FOSA) were detected in ≤42% of the samples. PFSA and PFCA concentrations were higher in seals sampled from Kongsfjorden, a fjord influenced by strong inflows of Atlantic Water compared to seals from fjords dominated by Arctic Water (e.g. Billefjorden). Sex, age and body condition of the seals did not influence PFAS concentrations. Due to the confounding effect of year and sampling area, temporal trends were assessed only in seals sampled from Kongsfjorden (5 years, n = 51). PFHxS and PFOS concentrations did not show significant linear trends during the whole study period, but a decrease was observed since 2004. Concentrations of all of the detected PFCAs (C9C13 PFCAs) increased until 2004 after which they have declined or stabilized. PMID:27089420

  5. AGING BEHAVIOR OF VITON O-RING SEALS IN THE 9975 SHIPPING PACKAGE

    SciTech Connect

    Skidmore, E.; Daugherty, W.; Hoffman, E.; Dunn, K.; Bellamy, S.

    2012-01-13

    The Savannah River Site (SRS) is storing plutonium (Pu) materials in the K-Area Materials Storage (KAMS) facility. The Pu materials were packaged according to the DOE-STD-3013 standard and shipped to the SRS in Type B 9975 packages. The robust 9975 shipping package was not designed for long-term product storage, but it is a specified part of the storage configuration and the KAMS facility safety basis credits the 9975 design with containment. Within the 9975 package, nested stainless steel containment vessels are closed with dual O-ring seals based on Viton{reg_sign} GLT or GLT-S fluoroelastomer. The aging behavior of the O-ring compounds is being studied to provide the facility with advanced notice of nonconformance and to develop life prediction models. A combination of field surveillance, leak testing of surrogate fixtures aged at bounding service temperatures, and accelerated-aging methodologies based on compression stress-relaxation and oxygen consumption analysis is being used to evaluate seal performance. A summary of the surveillance program relative to seal aging behavior is presented.

  6. Integrity testing of brush seal in shroud ring of T-700 engine

    NASA Astrophysics Data System (ADS)

    Hendricks, Robert C.; Griffin, Thomas A.; Bobula, George B.; Bill, Robert C.; Howe, Harold W.

    1992-08-01

    A split-ring brush seal was fabricated, installed between two labyrinth-honeycomb shroud seals, and tested in the fourth-stage turbine of a T-700 engine. The annealed Haynes 25 bristles rubbed directly against the nonconditioned, irregular Rene 80 turbine blade shroud surface. A total of 30 hr of cyclic and steady-state data were taken with surface speeds to 335 m/s (1100 ft/s) and shroud temperatures to 620 C (1150 F). Wear appeared to be rapid initially, with an orange flash of hot brush fragments during the first engine startup, to minimal after 10 hr of operation. The brush survived the testing but experienced some bristle pullouts and severe bristle wear; some turbine interface wear and possible material transfer was noted. Future design concerns center on tribological behavior at the interface with or without lubricants.

  7. Orbital transfer rocket engine technology program: Soft wear ring seal technology

    NASA Technical Reports Server (NTRS)

    Lariviere, Brian W.

    1992-01-01

    Liquid oxygen (LOX) compatibility tests, including autogenous ignition, promoted ignition, LOX impact tests, and friction and wear tests on different PV products were conducted for several polymer materials as verification for the implementation of soft wear ring seals in advanced rocket engine turbopumps. Thermoplastics, polyimide based materials, and polyimide-imide base materials were compared for oxygen compatibility, specific wear coefficient, wear debris production, and heat dissipation mechanisms. A thermal model was generated that simulated the frictional heating input and calculated the surface temperature and temperature distribution within the seal. The predictions were compared against measured values. Heat loads in the model were varied to better match the test data and determine the difference between the measured and the calculated coefficients of friction.

  8. Evaluation of soft rubber goods. [for use as O-rings, and seals on space shuttle

    NASA Technical Reports Server (NTRS)

    Merz, P. L.

    1974-01-01

    The performance of rubber goods suitable for use as O-rings, seals, gaskets, bladders and diaphragms under conditions simulating those of the space shuttle were studied. High reliability throughout the 100 flight missions planned for the space shuttle was considered of overriding importance. Accordingly, in addition to a rank ordering of the selected candidate materials based on prolonged fluid compatibility and sealability behavior, basic rheological parameters (such as cyclic hysteresis, stress relaxation, indicated modulus, etc.) were determined to develop methods capable of predicting the cumulative effect of these multiple reuse cycles.

  9. Giardia duodenalis and Cryptosporidium spp. in the intestinal contents of ringed seals (Phoca hispida) and bearded seals (Erignathus barbatus) in Nunavik, Quebec, Canada

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The prevalence in intestinal contents of ringed and bearded seals harvested for food in the Nunavik region of northern Quebec, Canada was determned for Giardia and Cryptosporidium genotypes and species. Specimens were analysed by dual color flow cytometry, immunofluorescence microscopy, and polymer...

  10. Demographic histories and genetic diversities of Fennoscandian marine and landlocked ringed seal subspecies

    PubMed Central

    Nyman, Tommi; Valtonen, Mia; Aspi, Jouni; Ruokonen, Minna; Kunnasranta, Mervi; Palo, Jukka U

    2014-01-01

    Island populations are on average smaller, genetically less diverse, and at a higher risk to go extinct than mainland populations. Low genetic diversity may elevate extinction probability, but the genetic component of the risk can be affected by the mode of diversity loss, which, in turn, is connected to the demographic history of the population. Here, we examined the history of genetic erosion in three Fennoscandian ringed seal subspecies, of which one inhabits the Baltic Sea ‘mainland’ and two the ‘aquatic islands’ composed of Lake Saimaa in Finland and Lake Ladoga in Russia. Both lakes were colonized by marine seals after their formation c. 9500 years ago, but Lake Ladoga is larger and more contiguous than Lake Saimaa. All three populations suffered dramatic declines during the 20th century, but the bottleneck was particularly severe in Lake Saimaa. Data from 17 microsatellite loci and mitochondrial control-region sequences show that Saimaa ringed seals have lost most of the genetic diversity present in their Baltic ancestors, while the Ladoga population has experienced only minor reductions. Using Approximate Bayesian computing analyses, we show that the genetic uniformity of the Saimaa subspecies derives from an extended founder event and subsequent slow erosion, rather than from the recent bottleneck. This suggests that the population has persisted for nearly 10,000 years despite having low genetic variation. The relatively high diversity of the Ladoga population appears to result from a high number of initial colonizers and a high post-colonization population size, but possibly also by a shorter isolation period and/or occasional gene flow from the Baltic Sea. PMID:25535558

  11. Development of seal ring carbon-graphite materials (tasks 5, 6, and 7)

    NASA Technical Reports Server (NTRS)

    Fechter, N. J.; Petrunich, P. S.

    1972-01-01

    Carbon-graphite seal ring bodies for operation at air temperatures to 1300 F(704 C) were manufactured from three select formulations. Mechanical and thermal properties, porosities, and oxidation rates were measured. The results have shown that: (1) Major property improvements anticipated from the screening studies were not realized because of processing problems associated with the scale-up in material size and probable deterioration of a phenolic resin binder; (2) the mechanical properties of a phenolic resin-bonded, carbon-graphite material can be improved by applying high pressure during carbonization; and (3) the textile form of graphite fiber used as the minor filler component in a carbon-graphite material can beneficially affect mechanical properties.

  12. Effects of the O-ring used for sealing in high-pressure balances on measurements of pressure

    NASA Astrophysics Data System (ADS)

    Woo, S. Y.; Lee, Y. J.; Choi, I. M.; Kim, B. S.; Shin, H. H.

    2002-08-01

    An oil-operated pressure balance is standard equipment widely used in the field of pressure metrology. Most of the commonly used pressure balances are in a simple piston-cylinder configuration where the piston and the cylinder can deform freely under pressure. This simple piston-cylinder assembly has an O-ring chamber on the cylinder bottom to seal the cylinder. The effects of this O-ring seal on the effective area are not well known. This paper demonstrates by the numerical method using finite element method and the experimental method that, when performing precise measurements of pressure using a pressure balance, the cylinder will be deformed by the oil pressure exerted on the bottom of the cylinder surrounded by the O-ring, causing a non-linearity in the change of effective area, and that, when the piston-cylinder assembly is used in the body with different diameters of O-ring, the effective area, i.e. the pressure, can be significantly changed. The effects of O-ring seals on the effective area of a DH5306 oil-operated pressure balance were investigated using two piston-cylinder assemblies with nominal effective areas of 2 mm2 over the pressure range of 100-300 MPa. Three different sizes of O-ring, 4.8, 8.0 and 11.7 mm in diameter, were used. The maximum change of the effective area can reach 30 ppm at 300 MPa and 18 ppm at 100 MPa due to the change of O-ring. Therefore, for precise pressure measurement, the correct understanding of the O-ring under the cylinder is required along with checking of the size of the O-ring under the cylinder whenever calibrating the piston-cylinder assembly.

  13. Tolerance by ringed seals (Phoca hispida) to impact pipe-driving and construction sounds at an oil production island.

    PubMed

    Blackwell, Susanna B; Lawson, John W; Williams, Michael T

    2004-05-01

    During June and July 2000, impact pipe-driving sounds at Northstar Island (Prudhoe Bay, Alaska) were recorded underwater and in air at distances 63-3000 m from the source. Simultaneously, reactions of nearby ringed seals (in water or on ice) were documented. Pipe-driving pulses were analyzed to determine unweighted peak and rms sound-pressure levels (SPLs) and sound-exposure levels (SELs). Underwater, mean levels for these parameters reached 157 and 151 dB re: 1 microPa and 145 dB re: 1 microPa2 x s, respectively, at 63 m. The corresponding values in air were 112 and 96 dB re: 20 microPa and 90 dB re: (20 microPa)2 x s, respectively. Underwater SPLs were <180 dB re: 1 microPa at all distances. During 55 h of observation, 23 observed seals exhibited little or no reaction to any industrial noise except approaching Bell 212 helicopters. Ringed seals swam in open water near the island throughout construction activities and as close as 46 m from the pipe-driving operation. Based on current audiometric data for seals, these sounds are expected to be audible to less than 3 km underwater and at least 0.5 km in air. Most likely the seals around Northstar Island were habituated to industrial sounds. PMID:15139648

  14. Tolerance by ringed seals (Phoca hispida) to impact pipe-driving and construction sounds at an oil production island

    NASA Astrophysics Data System (ADS)

    Blackwell, Susanna B.; Lawson, John W.; Williams, Michael T.

    2004-05-01

    During June and July 2000, impact pipe-driving sounds at Northstar Island (Prudhoe Bay, Alaska) were recorded underwater and in air at distances 63-3000 m from the source. Simultaneously, reactions of nearby ringed seals (in water or on ice) were documented. Pipe-driving pulses were analyzed to determine unweighted peak and rms sound-pressure levels (SPLs) and sound-exposure levels (SELs). Underwater, mean levels for these parameters reached 157 and 151 dB re: 1 μPa and 145 dB re: 1 μPa2.s, respectively, at 63 m. The corresponding values in air were 112 and 96 dB re: 20 μPa and 90 dB re: (20 μPa)2.s, respectively. Underwater SPLs were <180 dB re: 1 μPa at all distances. During 55 h of observation, 23 observed seals exhibited little or no reaction to any industrial noise except approaching Bell 212 helicopters. Ringed seals swam in open water near the island throughout construction activities and as close as 46 m from the pipe-driving operation. Based on current audiometric data for seals, these sounds are expected to be audible to less than 3 km underwater and at least 0.5 km in air. Most likely the seals around Northstar Island were habituated to industrial sounds.

  15. Hg Stable Isotope Time Trend in Ringed Seals Registers Decreasing Sea Ice Cover in the Alaskan Arctic.

    PubMed

    Masbou, Jérémy; Point, David; Sonke, Jeroen E; Frappart, Frédéric; Perrot, Vincent; Amouroux, David; Richard, Pierre; Becker, Paul R

    2015-08-01

    Decadal time trends of mercury (Hg) concentrations in Arctic biota suggest that anthropogenic Hg is not the single dominant factor modulating Hg exposure to Arctic wildlife. Here, we present Hg speciation (monomethyl-Hg) and stable isotopic composition (C, N, Hg) of 53 Alaskan ringed seal liver samples covering a period of 14 years (1988-2002). In vivo metabolic effects and foraging ecology explain most of the observed 1.6 ‰ variation in liver δ(202)Hg, but not Δ(199)Hg. Ringed seal habitat use and migration were the most likely factors explaining Δ(199)Hg variations. Average Δ(199)Hg in ringed seal liver samples from Barrow increased significantly from +0.38 ± 0.08‰ (±SE, n = 5) in 1988 to +0.59 ± 0.07‰ (±SE, n = 7) in 2002 (4.1 ± 1.2% per year, p < 0.001). Δ(199)Hg in marine biological tissues is thought to reflect marine Hg photochemistry before biouptake and bioaccumulation. A spatiotemporal analysis of sea ice cover that accounts for the habitat of ringed seals suggests that the observed increase in Δ(199)Hg may have been caused by the progressive summer sea ice disappearance between 1988 and 2002. While changes in seal liver Δ(199)Hg values suggests a mild sea ice control on marine MMHg breakdown, the effect is not large enough to induce measurable HgT changes in biota. This suggests that Hg trends in biota in the context of a warming Arctic are likely controlled by other processes. PMID:26132925

  16. Aging Behavior of Viton{sup R} O-Ring Seals in the 9975 Shipping Package - 12594

    SciTech Connect

    Skidmore, T. Eric; Daugherty, William L.; Hoffman, Elizabeth N.; Dunn, Kerry A.; Stephen Bellamy, J.; Shuler, James M.

    2012-07-01

    The Savannah River Site (SRS) is storing plutonium (Pu) materials in the K-Area Materials Storage (KAMS) facility. The Pu materials were packaged according to the DOE-STD-3013 standard and shipped to the SRS in Type B 9975 packages. The robust 9975 shipping package was not designed for long-term product storage, but it is a specified part of the storage configuration and the KAMS facility safety basis credits the 9975 design with containment. Within the 9975 package, nested stainless steel containment vessels are closed with dual O-ring seals based on Viton{sup R} GLT or GLT-S fluoro-elastomer. The aging behavior of the O-ring compounds is being studied to provide the facility with advanced notice of nonconformance and to develop life prediction models. A combination of field surveillance, leak testing of surrogate fixtures aged at bounding service temperatures, and accelerated-aging methodologies based on compression stress-relaxation and oxygen consumption analysis is being used to evaluate seal performance. A summary of the surveillance program relative to seal aging behavior is presented. The aging behavior of fluoro-elastomer seals based on Viton{sup R} GLT and GLT-S is being studied to develop life prediction models in support of long-term storage of plutonium materials in the 9975 shipping packages at the Savannah River Site. Field surveillance data in combination with accelerated-aging data suggest a significant lifetime for the seals. Typical storage conditions are not anticipated to challenge the leak-tightness of the seals for many years. Early life prediction models based on compression stress relaxation indicate a seal lifetime of ∼12 years at the maximum service temperature predicted (93 deg. C). Seal lifetimes at lower, more realistic conditions are likely significantly longer. Service life predictions based on CSR data are thus far conservative relative to predictions based on time to leakage failure. Surveillance data on packages examined after 6

  17. Non-contacting fluid ring seal systems for railcar axle bearing systems: Quarterly progress report No. 1, June 15 to September 15, 1987

    SciTech Connect

    Not Available

    1987-01-01

    The main objectives of this DOE contract is the technical development of a practical, cost effective Fluid Ring seal system capable of: Drastically reducing locomotive drawbar traction power requirements by lowering seal friction losses prevalent in present railcar axle bearing systems; increasing reliability and safety of railroad cars by minimizing bearing lubricant leakage and minimizing bearing ''hot boxes''; and improving the productivity of the railway transportation systems by reducing rolling stock ''outages'' due to long seal life. 14 refs.

  18. Variable friction secondary seal for face seals

    NASA Technical Reports Server (NTRS)

    Dirusso, E. (Inventor)

    1986-01-01

    Vibration and stability of a primary seal ring is controlled by a secondary seal system. An inflatable bladder which forms a portion of the secondary seal varies the damping applied to this seal ring. The amplitude of vibration of the primary seal ring is sensed with a proximity probe that is connected to a microprocessor in a control system. The bladder pressure is changed by the control system to mitigate any sensed instability or vibration.

  19. Dynamic Face Seal Arrangement

    NASA Technical Reports Server (NTRS)

    Dellacorte, Christopher (Inventor)

    1999-01-01

    A radial face seal arrangement is disclosed comprising a stationary seal ring that is spring loaded against a seal seat affixed to a rotating shaft. The radial face seal arrangement further comprises an arrangement that not only allows for preloading of the stationary seal ring relative to the seal seat, but also provides for dampening yielding a dynamic seating response for the radial face seal arrangement. The overall seal system, especially regarding the selection of the material for the stationary seal ring, is designed to operate over a wide temperature range from below ambient up to 900 C.

  20. 76 FR 9733 - Endangered and Threatened Species; Proposed Threatened Status for Subspecies of the Ringed Seal

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-22

    ... seals and the proposed rule for bearded seals (75 FR 77496; December 10, 2010) during these hearings...) 713- 1401. SUPPLEMENTARY INFORMATION: Background On December 10, 2010 (75 FR 77476), we published a... extended to March 25, 2011 (76 FR 6754; February 8, 2011). Public Hearings Joint Commerce-Interior...

  1. 76 FR 14882 - Endangered and Threatened Species; Proposed Threatened Status for Subspecies of the Ringed Seal

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-18

    ... seals and the proposed rule for bearded seals (75 FR 77496; December 10, 2010) during these hearings..., 2010 (75 FR 77476), we published a proposed rule to list the Arctic, Okhotsk, Baltic, and Ladoga... actions (February 8, 2011) was extended to March 25, 2011 (76 FR 6754; February 8, 2011). ]...

  2. Satellite telemetry informs PCB source apportionment in a mobile, high trophic level marine mammal: the ringed seal (Pusa hispida).

    PubMed

    Brown, Tanya M; Luque, Sebastian; Sjare, Becky; Fisk, Aaron T; Helbing, Caren C; Reimer, Ken J

    2014-11-18

    Marine mammals are typically poor indicators of point sources of environmental contaminants as a consequence of their often complex feeding ecologies and extensive movements, all of which mask the contributions of specific inputs. The release of polychlorinated biphenyls (PCBs) by a military radar station into Saglek Bay, Labrador (Canada) has contaminated marine sediments, bottom-feeding fish, seabirds, and some ringed seals, but attributing the PCBs in the latter highly mobile animals to this source is exceedingly difficult. In addition to the application of such tools as stable isotopes (δ(15)N and δ(13)C) and univariate and multivariate statistical exploration of contaminant patterns and ratios, we used satellite telemetry to track the movements of 13 seals in their transient use of different feeding areas. Reduced size of home range and core area (i.e., areas of concentrated use), as well as increased time in coastal inlets, were important determinants of increased PCB concentrations in seals reflecting the contribution of Saglek Bay. Seals were classified into the same feeding groups using both space use and their contaminant burdens 85% of the time, highlighting the link between feeding ecology and exposure to PCBs. While the PCB source at Saglek provided a strong local signal in a remote environment, this first use of satellite telemetry demonstrates the utility of evaluating space-use strategies to better understand contaminant exposure, and more specifically the contribution of contaminant hotspots to mobile predators. PMID:25314596

  3. PCBs have declined more than DDT-group residues in Arctic ringed seals (Phoca hispida) between 1972 and 1981

    SciTech Connect

    Addison, R.F.; Zinck, M.E.; Smith, T.G.

    1986-03-01

    Mean DDT-group concentrations in the blubber of western Arctic ringed seals (Phoca hispida) sampled in 1981 were less than 1..mu..g.g/sup -1/ wet weight. Male seals had higher concentrations than did females. PCB concentrations were about half of those in a sample of the same population taken in 1972, when allowance was made for the variation of residue concentrations with age, sex, and condition. This decline probably results from the ban on PCB manufacture and use imposed in the early 1970s. Concentrations of DDT-group residues did not show any clear decline over the same interval, and the relative proportions of p,p'-DDT and p,p'-DDE suggested that there is a continuing supply of DDT to the western Arctic. The most probable source of this is by atmospheric or water transport from the Far East, where DDT was used until at least the late 1970s.

  4. PCB related effects thresholds as derived through gene transcript profiles in locally contaminated ringed seals (Pusa hispida).

    PubMed

    Brown, Tanya M; Ross, Peter S; Reimer, Ken J; Veldhoen, Nik; Dangerfield, Neil J; Fisk, Aaron T; Helbing, Caren C

    2014-11-01

    Causal evidence linking toxic injury to polychlorinated biphenyl (PCB) exposure is typically confounded by the complexity of real-world contaminant mixtures to which aquatic wildlife are exposed. A local PCB "hotspot" on the Labrador coast provided a rare opportunity to evaluate the effects of PCBs on the health of a marine mammal as this chemical dominated their persistent organic pollutant (POP) burdens. The release of approximately 260 kg of PCBs by a military radar facility over a 30 year period (1970-2000) contaminated some local marine biota, including the ringed seal (Pusa hispida). The abundance profiles of eight health-related gene transcripts were evaluated in liver samples collected from 43 ringed seals in the affected area. The mRNA transcript levels of five gene targets, including aryl hydrocarbon receptor (Ahr), interleukin-1 β (Il1b), estrogen receptor α (Esr1), insulin like growth factor receptor 1 (Igf1), and glucocorticoid receptor α (Nr3c1) correlated with increasing levels of blubber PCBs. PCB threshold values calculated using best-fit hockey-stick regression models for these five genes averaged 1,680±206 ng/g lw, with the lowest, most conservative, being 1,370 ng/g lw for Il1b. Approximately 14% of the seals in the region exceeded this threshold. The dominance of PCBs in the seals studied enabled an assessment of the effects of this chemical on gene transcripts involved in regulating the health of a highly mobile predator, something that is rarely possible in the world of complex mixtures. PMID:25286162

  5. Psychoacoustic Studies of Spotted (Phoca largha) and Ringed (Pusa hispida) Seals.

    PubMed

    Sills, Jillian M; Southall, Brandon L; Reichmuth, Colleen

    2016-01-01

    Human development of the marine environment raises questions regarding the potential adverse effects of anthropogenic noise on marine mammals. For species that live in remote Arctic regions, recent and expanding human intrusions may pose a particular threat. Northern seals are poorly studied relative to their temperate counterparts and little is known of their acoustic ecology or behavior. Given this scarcity of relevant data, studies of hearing in Arctic seals are essential to characterize their auditory capabilities and to inform management decisions. This paper describes ongoing psychoacoustic studies that are examining aspects of hearing in two ice seal species. PMID:26611064

  6. Quantitative differences in the pineal ultrastructure of perinatal and adult harp (Phoca groenlandica) and hooded seals (Cystophora cristata).

    PubMed

    Aarseth, Jo Jorem; Stokkan, Karl-Arne

    2003-10-01

    Seals are unique among mammals in that newborns have a large pineal gland and extremely high plasma levels of melatonin at birth. Melatonin levels are also high in the seal fetus but decline rapidly during the first few days of life. The aim of the present study was to provide quantitative information about the ultrastructure of the seal pineal gland using fetal, newborn, and adult hooded seals (Cystophora cristata), and newborn and adult harp seals (Phoca groenlandica). The relative and absolute volumes of pinealocytes (Pi), arteries and veins, nerves, connective tissue, capillaries and glial cells, as well as mitocondria and lipid droplets in Pi, were calculated by use of point count analysis. Whereas the pineal ultrastructure was similar in fetuses and newborns, both seal species showed a pronounced and particular reduction in the volume of Pi and a similar reduction in pinealocyte mitochondria. There was also a shift from unmyelinated to myelinated pineal nerves in adults compared with fetal/newborns. The selective and marked reduction of Pi may explain the zonated pineal structure typical of the adult seal. The results demonstrate that the fetal gland is as large and active as that of the newborn seal and support the notion that the large size and high activity of the pineal gland in the newborn seal is a fading consequence of its prenatal condition. PMID:12932203

  7. Mechanical seal assembly

    DOEpatents

    Kotlyar, Oleg M.

    2002-01-01

    An improved mechanical seal assembly is provided for sealing rotating shafts with respect to their shaft housings, wherein the rotating shafts are subject to substantial axial vibrations. The mechanical seal assembly generally includes a rotating sealing ring fixed to the shaft, a non-rotating sealing ring adjacent to and in close contact with the rotating sealing ring for forming an annular seal about the shaft, and a mechanical diode element that applies a biasing force to the non-rotating sealing ring by means of hemispherical joint. The alignment of the mechanical diode with respect to the sealing rings is maintained by a series of linear bearings positioned axially along a desired length of the mechanical diode. Alternative embodiments include mechanical or hydraulic amplification components for amplifying axial displacement of the non-rotating sealing ring and transfering it to the mechanical diode.

  8. Mechanical seal assembly

    DOEpatents

    Kotlyar, Oleg M.

    2001-01-01

    An improved mechanical seal assembly is provided for sealing rotating shafts with respect to their shaft housings, wherein the rotating shafts are subject to substantial axial vibrations. The mechanical seal assembly generally includes a rotating sealing ring fixed to the shaft, a non-rotating sealing ring adjacent to and in close contact with the rotating sealing ring for forming an annular seal about the shaft, and a mechanical diode element that applies a biasing force to the non-rotating sealing ring by means of hemispherical joint. The alignment of the mechanical diode with respect to the sealing rings is maintained by a series of linear bearings positioned axially along a desired length of the mechanical diode. Alternative embodiments include mechanical or hydraulic amplification components for amplifying axial displacement of the non-rotating sealing ring and transferring it to the mechanical diode.

  9. Age and Sex Composition of Seals Killed by Polar Bears in the Eastern Beaufort Sea

    PubMed Central

    Pilfold, Nicholas W.; Derocher, Andrew E.; Stirling, Ian; Richardson, Evan; Andriashek, Dennis

    2012-01-01

    Background Polar bears (Ursus maritimus) of the Beaufort Sea enter hyperphagia in spring and gain fat reserves to survive periods of low prey availability. We collected information on seals killed by polar bears (n = 650) and hunting attempts on ringed seal (Pusa hispida) lairs (n = 1396) observed from a helicopter during polar bear mark-recapture studies in the eastern Beaufort Sea in spring in 1985–2011. We investigated how temporal shifts in ringed seal reproduction affect kill composition and the intraspecific vulnerabilities of ringed seals to polar bear predation. Principal Findings Polar bears primarily preyed on ringed seals (90.2%) while bearded seals (Erignathus barbatus) only comprised 9.8% of the kills, but 33% of the biomass. Adults comprised 43.6% (150/344) of the ringed seals killed, while their pups comprised 38.4% (132/344). Juvenile ringed seals were killed at the lowest proportion, comprising 18.0% (62/344) of the ringed seal kills. The proportion of ringed seal pups was highest between 2007–2011, in association with high ringed seal productivity. Half of the adult ringed seal kills were ≥21 years (60/121), and kill rates of adults increased following the peak of parturition. Determination of sex from DNA revealed that polar bears killed adult male and adult female ringed seals equally (0.50, n = 78). The number of hunting attempts at ringed seal subnivean lair sites was positively correlated with the number of pup kills (r2 = 0.30, P = 0.04), but was not correlated with the number of adult kills (P = 0.37). Conclusions/Significance Results are consistent with decadal trends in ringed seal productivity, with low numbers of pups killed by polar bears in spring in years of low pup productivity, and conversely when pup productivity was high. Vulnerability of adult ringed seals to predation increased in relation to reproductive activities and age, but not gender. PMID:22829949

  10. Combined Genetic and Telemetry Data Reveal High Rates of Gene Flow, Migration, and Long-Distance Dispersal Potential in Arctic Ringed Seals (Pusa hispida)

    PubMed Central

    Martinez-Bakker, Micaela E.; Sell, Stephanie K.; Swanson, Bradley J.; Kelly, Brendan P.; Tallmon, David A.

    2013-01-01

    Ringed seals (Pusa hispida) are broadly distributed in seasonally ice covered seas, and their survival and reproductive success is intricately linked to sea ice and snow. Climatic warming is diminishing Arctic snow and sea ice and threatens to endanger ringed seals in the foreseeable future. We investigated the population structure and connectedness within and among three subspecies: Arctic (P. hispida hispida), Baltic (P. hispida botnica), and Lake Saimaa (P. hispida saimensis) ringed seals to assess their capacity to respond to rapid environmental changes. We consider (a) the geographical scale of migration, (b) use of sea ice, and (c) the amount of gene flow between subspecies. Seasonal movements and use of sea ice were determined for 27 seals tracked via satellite telemetry. Additionally, population genetic analyses were conducted using 354 seals representative of each subspecies and 11 breeding sites. Genetic analyses included sequences from two mitochondrial regions and genotypes of 9 microsatellite loci. We found that ringed seals disperse on a pan-Arctic scale and both males and females may migrate long distances during the summer months when sea ice extent is minimal. Gene flow among Arctic breeding sites and between the Arctic and the Baltic Sea subspecies was high; these two subspecies are interconnected as are breeding sites within the Arctic subspecies. PMID:24130843

  11. Assessment of harbor seal predation on adult salmonids in a Pacific Northwest estuary.

    PubMed

    Wright, Bryan E; Riemer, Susan D; Brown, Robin F; Ougzin, Aicha M; Bucklin, Katherine A

    2007-03-01

    The populations of many native species have increased or expanded in distribution in recent decades, sometimes with negative consequences to sympatric native species that are rarer or less adaptable to anthropogenic changes to the environment. An example of this phenomenon from the Pacific Northwest is predation by locally abundant pinnipeds (seals and sea lions) on threatened, endangered, or otherwise depleted salmonid (Oncorhynchus spp.) populations. We used survey sampling methodology, acoustic telemetry, and molecular genetics to quantify the amount of harbor seal (Phoca vitulina) predation on a depressed run of coho salmon (O. kisutch) and to determine whether some seals consumed a disproportionately higher number of salmonids than others. Based on a probability sample totaling 759.5 h of observation, we estimated that seals consumed 1161 adult salmonids (95% CI = 503-1818 salmonids) during daylight hours over an 18.9-km estuarine study area in Oregon during an 84-d period in fall 2002. Simultaneous tracking of 56 seals via an acoustic telemetry array indicated that a small proportion of marked seals (12.5%) exhibited behavior that was consistent with specialization on salmonids. These seals spent the majority of their time in the riverine portion of the study area and did so disproportionately more at night than day. Genetic analysis of 116 salmonid structures recovered from 11 seal fecal samples suggested that coho salmon accounted for approximately one-half of total salmonid consumption. Though subject to considerable uncertainty, the combined results lead us to infer that seals consumed 21% (range = 3-63%) of the estimated prespawning population of coho salmon. We speculate that the majority of the predation occurred upriver, at night, and was done by a relatively small proportion of the local seal population. Understanding the extent and nature of pinniped predation can provide important inputs into risk assessments and other modeling efforts designed to

  12. Seal assembly

    NASA Astrophysics Data System (ADS)

    Salt, Jonathan G.; Korzun, Ronald W.; Abbott, David R.

    1993-01-01

    A unitary annular seal structure is provided for attachment to a turbine nozzle in a gas turbine engine. The nozzle includes an annular platform disposed about a longitudinal axis of the engine. An annular array of vanes is secured to the platform. The seal structure includes an abradable annular seal member, a seal backing member, and a seal attachment ring. The ring includes an annular, radially extending, axially acting spring member positioned to cooperate with a plurality of radially extending tabs on the backing member. In use, the seal structure is positioned within a circular opening within the turbine nozzle. The nozzle includes a radially depending appendage formed as part of the nozzle platform. The spring member abuts one side of the appendage and the tabs are positioned to abut another side of the appendage for holding the annular spring member in gas sealing engagement with the appendage to thus provide a seal against gas leakage and to restrain the seal structure axially. The spring member and tabs comprise a radially slideable joint for the seal structure. To restrict circumferential motion of the structure, slots are formed in the appendage for receiving the tabs. The seal is easily replaced by bending the tabs and sliding the seal structure axially out of the nozzle. Differential thermal expansion is accommodated by the slideable seal arrangement.

  13. Design optimization and testing of a pump wear ring labyrinth seal

    NASA Technical Reports Server (NTRS)

    Rhode, D. L.; Morrison, G. L.; Ko, S. H.

    1988-01-01

    It has been demonstrated that design optimization of labyrinth seals using the present numerical model is quite beneficial. The results shown include important, but previously unknown effects on the leakage rate, especially that of step height. Further, complete details are given of a very effective seal designed using this technique for the SSME high pressure hydrogen turbopump. Measurements using turbine flow meters revealed that the optimized configuration gives 67 percent leakage reduction over the original design. These measurements also reveal important leakage effects of the axial straining of the stator, which begins during pump start-up.

  14. Butyl rubber O-ring seals: Revision of test procedures for stockpile materials

    SciTech Connect

    Domeier, L.A.; Wagter, K.R.

    1996-12-01

    Extensive testing showed little correlation between test slab and O-ring performance. New procedures, comparable to those used with the traditional test slabs, were defined for hardness, compression set, and tensile property testing on sacrificial O-ring specimens. Changes in target performance values were made as needed and were, in one case, tightened to reflect the O-ring performance data. An additional study was carried out on O-ring and slab performance vs cure cycle and showed little sensitivity of material performance to large changes in curing time. Aging and spectra of certain materials indicated that two sets of test slabs from current vendor were accidently made from EPDM rather than butyl rubber. Random testing found no O-rings made from EPDM. As a result, and additional spectroscope test will be added to the product acceptance procedures to verify the type of rubber compound used.

  15. 76 FR 77466 - Endangered and Threatened Species; Proposed Threatened Status for Subspecies of the Ringed Seal

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-13

    ... largha) under the ESA (73 FR 16617). On May 28, 2008, we received a petition from the Center for Biological Diversity to list these three species of seals as threatened or endangered under the ESA... substantial scientific or commercial information indicating that the petitioned action may be warranted (73...

  16. Determination of spring modulus for several types of elastomeric materials (O-rings) and establishment of an open database for seals

    SciTech Connect

    McMurtry, W.M.; Hohnstreiter, G.F.

    1995-12-31

    Seals that provide the containment system interface between the packaging body and closure must function in high and low temperature environments, under dynamic and static loading conditions, and with different types of contained media. It is one of the most critical elements in the container since the container fails to meet regulations if the seal does not function properly. A research and testing program for seal materials was initiated at Sandia in 1988 with the goal of characterizing the behavior of seal materials commonly used in packages conditions as specified in the regulations (NRC IOCFR Part 71) and American National Standards Institute (ANSI) 14.5. The performance of elastomeric seals in undeformed closures at both high and low temperatures has been investigated (Bronowski 1995). Work has begun with this program to determine the response of elastomeric seals to fast acting dynamic deformations`` in the closure. The response of elastomeric o-ring seals during closure movements due to long-term deformations has already been characterized. What has not been well characterized are short-term closure movements with durations of only a few milliseconds that result in the so called ``burp`` release. Methods for generating this type of response in a repeatable manner had not been developed and standard leak detection equipment does not have a fast enough response time to measure these transient events. One factor which affects the length of the burp is the ability of the o-ring to quickly close the gap to prevent a significant leak. The dynamic characteristics of the elastomeric o-ring material including the dynamic spring modulus and internal damping are directly related to its ability to quickly close the gap. A set of tests designed to determine the dynamic properties for various material types and durometers (hardness) of elastomers that were both lubricated and dry at ambient temperature were conducted.

  17. Condition and mass impact oxygen stores and dive duration in adult female northern elephant seals.

    PubMed

    Hassrick, J L; Crocker, D E; Teutschel, N M; McDonald, B I; Robinson, P W; Simmons, S E; Costa, D P

    2010-02-15

    The range of foraging behaviors available to deep-diving, air-breathing marine vertebrates is constrained by their physiological capacity to breath-hold dive. We measured body oxygen stores (blood volume and muscle myoglobin) and diving behavior in adult female northern elephant seals, Mirounga angustirostris, to investigate age-related effects on diving performance. Blood volume averaged 74.4+/-17.0 liters in female elephant seals or 20.2+/-2.0% of body mass. Plasma volume averaged 32.2+/-7.8 liters or 8.7+/-0.7% of body mass. Absolute plasma volume and blood volume increased independently with mass and age. Hematocrit decreased weakly with mass but did not vary with age. Muscle myoglobin concentration, while higher than previously reported (7.4+/-0.7 g%), did not vary with mass or age. Pregnancy status did not influence blood volume. Mean dive duration, a proxy for physiological demand, increased as a function of how long seals had been at sea, followed by mass and hematocrit. Strong effects of female body mass (range, 218-600 kg) on dive duration, which were independent of oxygen stores, suggest that larger females had lower diving metabolic rates. A tendency for dives to exceed calculated aerobic limits occurred more frequently later in the at-sea migration. Our data suggest that individual physiological state variables and condition interact to determine breath-hold ability and that both should be considered in life-history studies of foraging behavior. PMID:20118309

  18. Development of seal ring carbon-graphite materials (tasks 8, 9, and 10)

    NASA Technical Reports Server (NTRS)

    Fechter, N. J.; Petrunich, P. S.

    1973-01-01

    A screening study was conducted to develop improved carbon-graphite materials for use in self-acting seals at air temperatures to 1300 F (704 C). Property measurements on materials prepared during this study have shown that: (1) The mechanical properties of a carbon-graphite material were significantly improved by using a fine milled artificial graphite filler material and including intensive mixing, warm molding, and pitch impregnation in the processing; and (2) the oxidation resistance of a carbon-graphite material was improved by including fine milled boron carbide as an oxidation-inhibiting additive. These techniques were employed to develop a material that has 10 times more oxidation resistance than that of a widely used commercial grade and mechanical properties that approach those of the commercial grade.

  19. Circumferential shaft seal

    NASA Technical Reports Server (NTRS)

    Ludwig, L. P. (Inventor)

    1980-01-01

    A circumferential shaft seal is described which comprises two sealing rings held to a rotating shaft by means of a surrounding elastomeric band. The rings are segmented and are of a rigid sealing material such as carbon or a polyimide and graphite fiber composite.

  20. Flow Field in a Single-Stage Model Air Turbine With Seal Rings and Pre-Swirled Purge Flow

    NASA Astrophysics Data System (ADS)

    Dunn, Dennis M.

    Modern gas turbines operate at high mainstream gas temperatures and pressures, which requires high durability materials. A method of preventing these hot gases from leaking into the turbine cavities is essential for improved reliability and cost reduction. Utilizing bleed-off air from the compressor to cool internal components has been a common solution, but at the cost of decreasing turbine performance. The present work thoroughly describes the complex flow field between the mainstream gas and a single rotor-stator disk cavity, and mechanisms of mainstream gas ingestion. A combined approach of experimental measurement and numerical simulation are performed on the flow in a single-stage model gas turbine. Mainstream gas ingestion into the cavity is further reduced by utilizing two axially overlapping seal rings, one on the rotor disk and the other on the stator wall. Secondary purge air is injected into the rotor-stator cavity pre-swirled through the stator radially inboard of the two seal rings. Flow field predictions from the simulations are compared against experimental measurements of static pressure, velocity, and tracer gas concentration acquired in a nearly identical model configuration. Operational conditions were performed with a main airflow Reynolds number of 7.86e4 and a rotor disk speed of 3000rpm. Additionally the rotational Reynolds number was 8.74 e5 with a purge air nondimensional flow rate cw=4806. The simulation models a 1/14 rotationally periodic sector of the turbine rig, consisting of four rotor blades and four stator vanes. Gambit was used to generate the three-dimensional unstructured grids ranging from 10 to 20 million cells. Effects of turbulence were modeled using the single-equation Spalart-Allmaras as well as the realizable k-epsilon models. Computations were performed using FLUENT for both a simplified steady-state and subsequent time-dependent formulation. Simulation results show larger scale structures across the entire sector angle

  1. Nozzle seal

    DOEpatents

    Groff, Russell Dennis; Vatovec, Richard John

    1978-06-11

    In an illustrative embodiment of the invention, a nuclear reactor pressure vessel, having an internal hoop from which the heated coolant emerges from the reactor core and passes through to the reactor outlet nozzles, is provided with annular sealing members operatively disposed between the outlet nozzle and the hoop and partly within a retaining annulus formed in the hoop. The sealing members are biased against the pressure vessel and the hoop and one of the sealing members is provided with a piston type pressure ring sealing member which effectively closes the path between the inlet and outlet coolants in the region about the outlet nozzle establishing a leak-proof condition. Furthermore, the flexible responsiveness of the seal assures that the seal will not structurally couple the hoop to the pressure vessel.

  2. Assessment of neurotoxic effects of mercury in beluga whales (Delphinapterus leucas), ringed seals (Pusa hispida), and polar bears (Ursus maritimus) from the Canadian Arctic.

    PubMed

    Krey, Anke; Ostertag, Sonja K; Chan, Hing Man

    2015-03-15

    Marine mammals are indicator species of the Arctic ecosystem and an integral component of the traditional Inuit diet. The potential neurotoxic effects of increased mercury (Hg) in beluga whales (Delphinapterus leucas), ringed seals (Pusa hispida), and polar bears (Ursus maritimus) are not clear. We assessed the risk of Hg-associated neurotoxicity to these species by comparing their brain Hg concentrations with threshold concentrations for toxic endpoints detected in laboratory animals and field observations: clinical symptoms (>6.75 mg/kg wet weight (ww)), neuropathological signs (>4 mg/kg ww), neurochemical changes (>0.4 mg/kg ww), and neurobehavioral changes (>0.1mg/kg ww). The total Hg (THg) concentrations in the cerebellum and frontal lobe of ringed seals and polar bears were <0.5mg/kg ww, whereas the average concentration in beluga whale brain was >3mg/kg ww. Our results suggest that brain THg levels in polar bears are below levels that induce neurobehavioral effects as reported in the literature, while THg concentrations in ringed seals are within the range that elicit neurobehavioral effects and individual ringed seals exceed the threshold for neurochemical changes. The relatively high THg concentration in beluga whales exceeds all of the neurotoxicity thresholds assessed. High brain selenium (Se):Hg molar ratios were observed in all three species, suggesting that Se could protect the animals from Hg-associated neurotoxicity. This assessment was limited by several factors that influence neurotoxic effects in animals, including: animal species; form of Hg in the brain; and interactions with modifiers of Hg-associated toxicity, such as Se. Comparing brain Hg concentrations in wildlife with concentrations of appropriate laboratory studies can be used as a tool for risk characterization of the neurotoxic effects of Hg in Arctic marine mammals. PMID:24958011

  3. Comparative hepatic in vitro depletion and metabolite formation of major perfluorooctane sulfonate precursors in Arctic polar bear, beluga whale, and ringed seal.

    PubMed

    Letcher, Robert J; Chu, Shaogang; McKinney, Melissa A; Tomy, Gregg T; Sonne, Christian; Dietz, Rune

    2014-10-01

    Perfluorooctane sulfonate (PFOS) has been reported to be among the most concentrated persistent organic pollutants in Arctic marine wildlife. The present study examined the in vitro depletion of major PFOS precursors, N-ethyl-perfluorooctane sulfonamide (N-EtFOSA) and perfluorooctane sulfonamide (FOSA), as well as metabolite formation using an assay based on enzymatically viable liver microsomes for three top Arctic marine mammalian predators, polar bear (Ursus maritimus), beluga whale (Delphinapterus leucas), and ringed seal (Pusa hispida), and in laboratory rat (Rattus rattus) serving as a general mammalian model and positive control. Rat assays showed that N-EtFOSA (38 nM or 150 ng mL(-1)) to FOSA metabolism was >90% complete after 10 min, and at a rate of 23 pmol min(-1) mg(-1) protein. Examining all species in a full 90 min incubation assay, there was >95% N-EtFOSA depletion for the rat active control and polar bear microsomes, ∼65% for ringed seals, and negligible depletion of N-EtFOSA for beluga whale. Concomitantly, the corresponding in vitro formation of FOSA from N-EtFOSA was also quantitatively rat≈polar bear>ringed seal>beluga whale. A lack of enzymatic ability and/or a rate too slow to be detected likely explains the lack of N-EtFOSA to FOSA transformation for beluga whale. In the same assays, the depletion of the FOSA metabolite was insignificant (p>0.01) and with no concomitant formation of PFOS metabolite. This suggests that, in part, a source of FOSA is the biotransformation of accumulated N-EtFOSA in free-ranging Arctic ringed seal and polar bear. PMID:25048910

  4. Triple acting radial seal

    DOEpatents

    Ebert, Todd A; Carella, John A

    2012-03-13

    A triple acting radial seal used as an interstage seal assembly in a gas turbine engine, where the seal assembly includes an interstage seal support extending from a stationary inner shroud of a vane ring, the interstage seal support includes a larger annular radial inward facing groove in which an outer annular floating seal assembly is secured for radial displacement, and the outer annular floating seal assembly includes a smaller annular radial inward facing groove in which an inner annular floating seal assembly is secured also for radial displacement. A compliant seal is secured to the inner annular floating seal assembly. The outer annular floating seal assembly encapsulates the inner annular floating seal assembly which is made from a very low alpha material in order to reduce thermal stress.

  5. Flexible sliding seal

    NASA Technical Reports Server (NTRS)

    Wallenhorst, E. L.

    1980-01-01

    Circular seal both slides and flexes to accomodate relative motion between two sealed members. Originally developed for Space Shuttle orbiter, it contains sliding seal to accommodate engine gimbaling and flexible seal that absorbs forward motion at high thrust of engine heat shield relative to airframe. Other possible applications are in support structures of heavy machinery and vehicle engines. Flexible sliding seal is ring about 7 feet in diameter and can withstand temperatures up to 1,600 F.

  6. Seal arrangement

    DOEpatents

    Lundholm, Gunnar

    1987-01-01

    A seal arrangement is provided for preventing gas leakage along a reciprocating piston rod or other reciprocating member passing through a wall which separates a high pressure gas chmber and a low pressure gas chamber. Liquid lubricant is applied to the lower pressure side of a sealing gland surrounding the piston rod to prevent the escape of gas between the rod and the gland. The sealing gland is radially forced against the piston rod by action of a plurality of axially stacked O-rings influenced by an axially acting spring as well as pressure from the gas.

  7. Ultra high vacuum seal arrangement

    SciTech Connect

    Flaherty, R.

    1981-08-11

    Arrangement for demountably sealing two concentric metallic tubes in an ultra high vacuum system which facilitates remote actuation is claimed. A tubular seal includes integral spaced lips which circumferentially engage the metallic tubes. The lips plastically deform the metallic tubes by mechanical forces resulting from a martensite to austenite transformation of the tubular seal upon application of a predetermined temperature. The sealing force is released upon application of another temperature which causes a transformation from the stronger austenite to the weaker martensite. Use of a dual acting sealing ring and driving ring circumferentially contacting the sealing ring is particularly applicable to sealing larger diameter concentric metallic members.

  8. Ultra high vacuum seal arrangement

    DOEpatents

    Flaherty, Robert

    1981-01-01

    Arrangement for demountably sealing two concentric metallic tubes in an ultra high vacuum system which facilitates remote actuation. A tubular seal includes integral spaced lips which circumferentially engage the metallic tubes. The lips plastically deform the metallic tubes by mechanical forces resulting from a martensite to austenite transformation of the tubular seal upon application of a predetermined temperature. The sealing force is released upon application of another temperature which causes a transformation from the stronger austenite to the weaker martensite. Use of a dual acting sealing ring and driving ring circumferentially contacting the sealing ring is particularly applicable to sealing larger diameter concentric metallic members.

  9. Salinity and water temperature observations from the inaccessible waters beneath the dense ice mélange and tidewater glacier margins in Greenland obtained using instrumented ringed seals

    NASA Astrophysics Data System (ADS)

    Mernild, Sebastian H.; Holland, David M.; Holland, Denise; Rosing-Asvid, Aqqalu

    2015-04-01

    Observations obtained by ringed seals (Pusa hispida) near tidewater glacier margins in Ilulissat Icefjord and Sermilik Fjord provide a novel platform to examine the otherwise inaccessible waters beneath the dense ice melangé within the first 0-10 km of the calving front - to advance our understanding of the hydrographic conditions of the waters near the outlet glaciers. CTD (Conductivity, Temperature, and Depth) Oceanography SRDL (Satellite Relay Data Logger) instruments were mounted on ringed seals with the aim of continuously measuring water salinity, depth, and the location (coordinates) of the seals. Instruments were mounted in August and September to illustrate the non-summer month's variability. A clear link, for example, in the north and south arms of Ilulissat Icefjord is shown after spikes in ice sheet melt water runoff on salinity changes in the upper water column. Small-amplitude runoff variability during the recession of runoff in late-summer did not create a clear signal in fjord salinity variability. The effect of runoff spikes on fjord salinity is less pronounced near the ice-margin of Jakobshavn Glacier than in the north and south arms. The vertically uneven change in salinity in days after a runoff peak indicate uneven vertical distribution of runoff draining through the glacier margin, where most runoff entered the fjord in the upper 50 m (the amount of englacial runoff decreased from the water surface and downwards). The seal-dive salinity profiles did not capture any signal of englacial freshwater entering the fjord across the grounding line. Even though, the seal observations seems to advance our understanding of hydrographic changes in the inaccessible waters beneath the dense ice mélange at the tide water margins.

  10. Environment and activity affect skin temperature in breeding adult male elephant seals (Mirounga angustirostris).

    PubMed

    Norris, A L; Houser, D S; Crocker, D E

    2010-12-15

    The large body size and high rates of metabolic heat production associated with male mating success in polygynous systems creates potential thermoregulatory challenges for species breeding in warm climates. This is especially true for marine predators carrying large blubber reserves intended for thermoregulation in cold water and fuel provision during extended fasts. Thermographic images were used to measure changes in skin temperature (T(S)) in adult male northern elephant seals (Mirounga angustirostris) over the breeding season. Environmental variables, primarily ambient temperature and solar radiation, were the principal determinants of mean and maximum T(S). When controlled for environmental variables, dominance rank significantly impacted mean T(S), being highest in alpha males. Behavioral activity significantly influenced T(S) but in a counter-intuitive way, with inactive males exhibiting the highest T(S). This was likely due to strong impacts of environmental variables on the kinds of behavior exhibited, with males being less active on warm, humid days at peak solar radiation. We classified thermal windows as areas in which T(S) was one standard deviation greater than mean T(S) for the individual seal within a thermograph. Thermal features suggest active physiological thermoregulation during and after combat and significant circulatory adaptations for heat dumping, as evidenced by recurring locations of thermal windows representing widely varying T(S) values. Frequent observations of localized T(S) above 37°C, particularly after combat, suggest the production of thermoregulatory stress during breeding behavior. Our findings demonstrate the importance of environmental drivers in shaping activity patterns during breeding and provide evidence for thermoregulatory costs of successful breeding in large polygynous males. PMID:21113001

  11. A comparison of ringed and bearded seal diet, condition and productivity between historical (1975-1984) and recent (2003-2012) periods in the Alaskan Bering and Chukchi seas

    NASA Astrophysics Data System (ADS)

    Crawford, Justin A.; Quakenbush, Lori T.; Citta, John J.

    2015-08-01

    Reductions in summer sea ice in the Chukchi and Beaufort seas are expected to affect what has been an ice-adapted marine food web in the Pacific Arctic. To determine whether recent decreases in sea ice have affected ice-associated marine predators (i.e., ringed, Pusa hispida, and bearded seals, Erignathus barbatus) in the Bering and Chukchi seas we compared diet, body condition, growth, productivity, and the proportion of pups harvested (an index of weaning success) for seals of each species harvested by 11 Alaskan villages during two periods; a historical (1975-1984) and a recent period (2003-2012). We also examined how changes in indices of seal health may be correlated with the reduction of sea ice characteristic of the recent period. For ringed seals ⩾1 year of age, the % frequency of occurrence (%FO) of Arctic cod (Boreogadus saida), walleye pollock (Gadus chalcogramma), rainbow smelt (Osmerus mordax), and Pacific herring (Clupea pallasi) increased from the historic to the recent period, while the %FO of invertebrates decreased for both pups and seals ⩾1 year of age. For bearded seals ⩾1 year of age, the %FO of Arctic cod, pricklebacks, and flatfish increased during the recent period, while the %FO of saffron cod (Eleginus gracilis) decreased for pups. Although invertebrates did not change overall for either age class, decreases occurred in 10 of 24 specific prey categories, for bearded seals ⩾1 year of age; only echiurids increased. The %FO of gastropods and bivalves increased for pups while isopods and one species of shrimp and crab decreased in occurrence. During the recent period ringed seals grew faster, had thicker blubber, had no change in pregnancy rate, matured 2 years earlier, and a larger proportion of pups was harvested than during the historical period. Correlations with spring ice concentration showed that the growth and blubber thickness of seals ⩾1 year of age, blubber thickness of pups, and the proportion of pups in the harvest all

  12. Rotary shaft sealing assembly

    DOEpatents

    Dietle, Lannie L.; Schroeder, John E.; Kalsi, Manmohan S.; Alvarez, Patricio D.

    2010-09-21

    A rotary shaft sealing assembly in which a first fluid is partitioned from a second fluid in a housing assembly having a rotary shaft located at least partially within. In one embodiment a lip seal is lubricated and flushed with a pressure-generating seal ring preferably having an angled diverting feature. The pressure-generating seal ring and a hydrodynamic seal may be used to define a lubricant-filled region with each of the seals having hydrodynamic inlets facing the lubricant-filled region. Another aspect of the sealing assembly is having a seal to contain pressurized lubricant while withstanding high rotary speeds. Another rotary shaft sealing assembly embodiment includes a lubricant supply providing a lubricant at an elevated pressure to a region between a lip seal and a hydrodynamic seal with a flow control regulating the flow of lubricant past the lip seal. The hydrodynamic seal may include an energizer element having a modulus of elasticity greater than the modulus of elasticity of a sealing lip of the hydrodynamic seal.

  13. Rotary shaft sealing assembly

    DOEpatents

    Dietle, Lannie L; Schroeder, John E; Kalsi, Manmohan S; Alvarez, Patricio D

    2013-08-13

    A rotary shaft sealing assembly in which a first fluid is partitioned from a second fluid in a housing assembly having a rotary shaft located at least partially within. In one embodiment a lip seal is lubricated and flushed with a pressure-generating seal ring preferably having an angled diverting feature. The pressure-generating seal ring and a hydrodynamic seal may be used to define a lubricant-filled region with each of the seals having hydrodynamic inlets facing the lubricant-filled region. Another aspect of the sealing assembly is having a seal to contain pressurized lubricant while withstanding high rotary speeds. Another rotary shaft sealing assembly embodiment includes a lubricant supply providing a lubricant at an elevated pressure to a region between a lip seal and a hydrodynamic seal with a flow control regulating the flow of lubricant past the lip seal. The hydrodynamic seal may include an energizer element having a modulus of elasticity greater than the modulus of elasticity of a sealing lip of the hydrodynamic seal.

  14. Mechanically expandable annular seal

    DOEpatents

    Gilmore, Richard F.

    1983-01-01

    A mechanically expandable annular reusable seal assembly to form an annular hermetic barrier between two stationary, parallel, and planar containment surfaces. A rotatable ring, attached to the first surface, has ring wedges resembling the saw-tooth array of a hole saw. Matching seal wedges are slidably attached to the ring wedges and have their motion restricted to be perpendicular to the second surface. Each seal wedge has a face parallel to the second surface. An annular elastomer seal has a central annular region attached to the seal wedges' parallel faces and has its inner and outer circumferences attached to the first surface. A rotation of the ring extends the elastomer seal's central region perpendicularly towards the second surface to create the fluidtight barrier. A counterrotation removes the barrier.

  15. Mechanically expandable annular seal

    DOEpatents

    Gilmore, R.F.

    1983-07-19

    A mechanically expandable annular reusable seal assembly to form an annular hermetic barrier between two stationary, parallel, and planar containment surfaces is described. A rotatable ring, attached to the first surface, has ring wedges resembling the saw-tooth array of a hole saw. Matching seal wedges are slidably attached to the ring wedges and have their motion restricted to be perpendicular to the second surface. Each seal wedge has a face parallel to the second surface. An annular elastomer seal has a central annular region attached to the seal wedges' parallel faces and has its inner and outer circumferences attached to the first surface. A rotation of the ring extends the elastomer seal's central region perpendicularly towards the second surface to create the fluid tight barrier. A counter rotation removes the barrier. 6 figs.

  16. Rim seal for turbine wheel

    DOEpatents

    Glezer, Boris; Boyd, Gary L.; Norton, Paul F.

    1996-01-01

    A turbine wheel assembly includes a disk having a plurality of blades therearound. A ceramic ring is mounted to the housing of the turbine wheel assembly. A labyrinth rim seal mounted on the disk cooperates with the ceramic ring to seal the hot gases acting on the blades from the disk. The ceramic ring permits a tighter clearance between the labyrinth rim seal and the ceramic ring.

  17. Chemical immobilization of adult female Weddell seals with tiletamine and zolazepam: effects of age, condition and stage of lactation

    PubMed Central

    Wheatley, Kathryn E; Bradshaw, Corey JA; Harcourt, Robert G; Davis, Lloyd S; Hindell, Mark A

    2006-01-01

    Background Chemical immobilization of Weddell seals (Leptonychotes weddellii) has previously been, for the most part, problematic and this has been mainly attributed to the type of immobilizing agent used. In addition to individual sensitivity, physiological status may play an important role. We investigated the use of the intravenous administration of a 1:1 mixture of tiletamine and zolazepam (Telazol®) to immobilize adult females at different points during a physiologically demanding 5–6 week lactation period. We also compared performance between IV and IM injection of the same mixture. Results The tiletamine:zolazepam mixture administered intravenously was an effective method for immobilization with no fatalities or pronounced apnoeas in 106 procedures; however, there was a 25 % (one animal in four) mortality rate with intramuscular administration. Induction time was slightly longer for females at the end of lactation (54.9 ± 2.3 seconds) than at post-parturition (48.2 ± 2.9 seconds). In addition, the number of previous captures had a positive effect on induction time. There was no evidence for effects due to age, condition (total body lipid), stage of lactation or number of captures on recovery time. Conclusion We suggest that intravenous administration of tiletamine and zolazepam is an effective and safe immobilizing agent for female Weddell seals. Although individual traits could not explain variation in recovery time, we suggest careful monitoring of recovery times during longitudinal studies (> 2 captures). We show that physiological pressures do not substantially affect response to chemical immobilization with this mixture; however, consideration must be taken for differences that may exist for immobilization of adult males and juveniles. Nevertheless, we recommend a mass-specific dose of 0.50 – 0.65 mg/kg for future procedures with adult female Weddell seals and a starting dose of 0.50 mg/kg for other age classes and other phocid seals. PMID

  18. Rings

    SciTech Connect

    Davis, R.L.

    1989-01-01

    The essence of vortex physics is that at certain low-energy scales elementary excitations of a point particle theory can behave like strings rather than particles. Vortices are the resulting string-like solutions; their thickness sets the distance scale beyond which physics is string-like rather than particle-like. String degrees of freedom are massless in the sense that excitations on a string can have an arbitrarily low frequency. Non-string degrees of freedom correspond to massive particles and are absent from the low energy spectrum. This article considers only field theories with vortices at low energies. The possible existence of a class of solitons in these vortex theories will be discussed. They are vortex rings: they are localized and finite in energy, and able to carry the quantum numbers of point particles. Rings are thus particle-like solutions of a vortex theory, which is itself a limit of a point particle field theory.

  19. Pre-partum diet of adult female bearded seals in years of contrasting ice conditions.

    PubMed

    Hindell, Mark A; Lydersen, Christian; Hop, Haakon; Kovacs, Kit M

    2012-01-01

    Changing patterns of sea-ice distribution and extent have measurable effects on polar marine systems. Beyond the obvious impacts of key-habitat loss, it is unclear how such changes will influence ice-associated marine mammals in part because of the logistical difficulties of studying foraging behaviour or other aspects of the ecology of large, mobile animals at sea during the polar winter. This study investigated the diet of pregnant bearded seals (Erignathus barbatus) during three spring breeding periods (2005, 2006 and 2007) with markedly contrasting ice conditions in Svalbard using stable isotopes (δ(13)C and δ(15)N) measured in whiskers collected from their newborn pups. The δ(15)N values in the whiskers of individual seals ranged from 11.95 to 17.45 ‰, spanning almost 2 full trophic levels. Some seals were clearly dietary specialists, despite the species being characterised overall as a generalist predator. This may buffer bearded seal populations from the changes in prey distributions lower in the marine food web which seems to accompany continued changes in temperature and ice cover. Comparisons with isotopic signatures of known prey, suggested that benthic gastropods and decapods were the most common prey. Bayesian isotopic mixing models indicated that diet varied considerably among years. In the year with most fast-ice (2005), the seals had the greatest proportion of pelagic fish and lowest benthic invertebrate content, and during the year with the least ice (2006), the seals ate more benthic invertebrates and less pelagic fish. This suggests that the seals fed further offshore in years with greater ice cover, but moved in to the fjords when ice-cover was minimal, giving them access to different types of prey. Long-term trends of sea ice decline, earlier ice melt, and increased water temperatures in the Arctic are likely to have ecosystem-wide effects, including impacts on the forage bases of pagophilic seals. PMID:22693616

  20. Seals and Sealing Techniques

    NASA Technical Reports Server (NTRS)

    1972-01-01

    Developments by the aerospace industry in seals and sealing techniques are announced for possible use in other areas. The announcements presented are grouped as: sealing techniques for cryogenic fluids, high pressure applications, and modification for improved performance.

  1. Tamper indicating seal

    SciTech Connect

    Romero, Juan A.; Walker, Charles A.; Blair, Dianna S.; Bodmer, Connie C.

    2012-05-29

    Seals have a flexible wire that can be looped through a hasp-like device. The seals include a body having a recess, a plug insertable into the recess and a snap ring for fastening the plug to the body. The plug and/or body can have access holes for inserting the wire into the recess. "Teeth" on the outer diameter and through-holes through the thickness of the snap ring allow for passing the ends of the flexible wire from the recess through the snap ring. The ends of the wire can be folded back over the snap ring and into engagement with the teeth. Assembly of the seal causes the ends of the wire to be securely fastened between the teeth of the snap ring and the sidewall of the recess. Seals can include a plug and/or body made of a frangible material such as glass, ceramic, glass-ceramic or brittle polymer.

  2. Analysis and design of a uniform-clearance, pumping-ring rod seal for the Stirling engine

    NASA Technical Reports Server (NTRS)

    Etsion, I.

    1980-01-01

    A uniform clearance pumping ring, as opposed to the conventional taper clearance one, is described. The uniform clearance concept eliminates complex elastohydrodynamic problems and enables a simple analytical treatment to be made. An analytical expression is derived for the pumping rate showing the effect of various design parameters on the pumping ring's performance. An optimum clearance is found by which the pumping rate is maximized and a numerical example is presented to demonstrate the potential of the uniform clearance design.

  3. Dynamic valve seal is reliable at cryogenic temperatures

    NASA Technical Reports Server (NTRS)

    Moxley, H. E.

    1967-01-01

    C-shaped PTFE /polytetrafluorethylene/ seal ring provides a reliable seal in cryogenic fluids over a fluid pressure range of 0 to 2000 psig. It is interference-fitted internally with a metal expander ring and a metal compressor ring.

  4. Energy efficient face seal

    NASA Technical Reports Server (NTRS)

    Sehnal, J.; Sedy, J.; Etsion, I.; Zobens, A.

    1982-01-01

    Torque, face temperature, leakage, and wear of a flat face seal were compared with three coned face seals at pressures up to 2758 kPa and speeds up to 8000 rpm. Axial movement of the mating seal parts was recorded by a digital data acquisition system. The coning of the tungsten carbide primary ring ranged from .51 micro-m to 5.6 micro-m. The torque of the coned face seal balanced to 76.3% was an average 42% lower, the leakage eleven times higher, than that of the standard flat face seal. The reduction of the balance of the coned face seal to 51.3% resulted by decreasing the torque by an additional 44% and increasing leakage 12 to 230 times, depending on the seal shaft speed. No measurable wear was observed on the face of the coned seals.

  5. Seal assembly with anti-rotation pin for high pressure supercritical fluids

    DOEpatents

    Wright, Steven A.; Fuller, Robert L.

    2014-08-05

    A seal assembly for sealing a machine with a first chamber and a second chamber is provided. A rotating shaft extends through the first and second chambers, and rotates therein. The seal assembly has a seal housing, a seal ring and a seal pin. The seal housing is positionable in the machine housing. The seal housing has a seal pocket extending into a fluid side thereof, and a housing receptacle extending into an inner diameter thereof at the seal pocket. The seal ring is positionable in the seal pocket of the seal housing for forming a seal therewith. The seal ring has a ring receptacle extending into an outer diameter thereof. The ring receptacle is positionable adjacent to the housing receptacle for defining a pin hole therebetween. The seal pin is loosely positionable in the pin hole whereby movement about the seal ring is accommodated while preventing rotation thereof.

  6. Bimodal Winter Haul-Out Patterns of Adult Weddell Seals (Leptonychotes weddellii) in the Southern Weddell Sea.

    PubMed

    Boehme, Lars; Baker, Amy; Fedak, Mike; Årthun, Marius; Nicholls, Keith; Robinson, Patrick; Costa, Dan; Biuw, Martin; Photopoulou, Theoni

    2016-01-01

    Hauling out is an essential component of pinniped life-history. Haul-out behaviour may be affected by biological (e.g. sex, age and condition) and physical factors (e.g. food availability and environmental conditions), and identifying these factors may help explain the spatio-temporal distribution and habitat use of pinnipeds. The aim of this study is to describe observed winter haul-out patterns of adult Weddell seals in the Weddell Sea and investigate the role of potential predictors to gain insight into the way these animals interact with the physical environment in this region. We examined the haul-out behaviour in relation to available biological (i.e., diving effort, sex) and physical information (i.e., sun angle). Thirty-three satellite telemetry tags were deployed on adult Weddell seals in the southern Weddell Sea during February 2007, 2009 and 2011, following their annual moult recording information on the behavioural mode of the animal: at surface, hauled out or diving. At the end of the austral summer Weddell seals spent, on average, more than 40% of their time hauled out on the ice. Under constant light conditions, it appears that physiological factors drive sex differences in the timing and duration of haul-out behaviour, with females spending on average more time hauled out than males during daylight hours. This time spent hauled-out declined to around 15% in both sexes by the beginning of autumn and remained at this level with a clear nocturnal haul-out pattern during the winter. The time spent diving increased during this period, indicating an increase in foraging effort during the winter months, and led to a common haul-out pattern in both sexes over winter. We found a positive relationship between haul-out duration and the percentage of time spent diving prior to a haul-out in both sexes, with the exception of female daytime haul-outs early in the year. PMID:27196097

  7. Bimodal Winter Haul-Out Patterns of Adult Weddell Seals (Leptonychotes weddellii) in the Southern Weddell Sea

    PubMed Central

    Fedak, Mike; Årthun, Marius; Nicholls, Keith; Robinson, Patrick; Costa, Dan; Biuw, Martin

    2016-01-01

    Hauling out is an essential component of pinniped life-history. Haul-out behaviour may be affected by biological (e.g. sex, age and condition) and physical factors (e.g. food availability and environmental conditions), and identifying these factors may help explain the spatio-temporal distribution and habitat use of pinnipeds. The aim of this study is to describe observed winter haul-out patterns of adult Weddell seals in the Weddell Sea and investigate the role of potential predictors to gain insight into the way these animals interact with the physical environment in this region. We examined the haul-out behaviour in relation to available biological (i.e., diving effort, sex) and physical information (i.e., sun angle). Thirty-three satellite telemetry tags were deployed on adult Weddell seals in the southern Weddell Sea during February 2007, 2009 and 2011, following their annual moult recording information on the behavioural mode of the animal: at surface, hauled out or diving. At the end of the austral summer Weddell seals spent, on average, more than 40% of their time hauled out on the ice. Under constant light conditions, it appears that physiological factors drive sex differences in the timing and duration of haul-out behaviour, with females spending on average more time hauled out than males during daylight hours. This time spent hauled-out declined to around 15% in both sexes by the beginning of autumn and remained at this level with a clear nocturnal haul-out pattern during the winter. The time spent diving increased during this period, indicating an increase in foraging effort during the winter months, and led to a common haul-out pattern in both sexes over winter. We found a positive relationship between haul-out duration and the percentage of time spent diving prior to a haul-out in both sexes, with the exception of female daytime haul-outs early in the year. PMID:27196097

  8. Damped flexible seal

    DOEpatents

    DuBois, Neil J.; Amaral, Antonio M.

    1992-10-27

    A damped flexible seal assembly for a torpedo isolates the tailcone thereof rom vibrational energy present in the drive shaft assembly. A pair of outside flanges, each of which include an inwardly facing groove and an O-ring constrained therein, provide a watertight seal against the outer non-rotating surface of the drive shaft assembly. An inside flange includes an outwardly-facing groove and an O-ring constrained therein, and provides a watertight seal against the inner surface of the tail cone. Two cast-in-place elastomeric seals provide a watertight seal between the flanges and further provide a damping barrier between the outside flanges and the inside flanges for damping vibrational energy present in the drive shaft assembly before the energy can reach the tailcone through the seal assembly.

  9. Self-acting shaft seals

    NASA Technical Reports Server (NTRS)

    Ludwig, L. P.

    1978-01-01

    Self-acting seals are described in detail. The mathematical models for obtaining a seal force balance and the equilibrium operating film thickness are outlined. Particular attention is given to primary ring response (seal vibration) to rotating seat face runout. This response analysis reveals three different vibration models with secondary seal friction being an important parameter. Leakage flow inlet pressure drop and affects of axisymmetric sealing face deformations are discussed. Experimental data on self-acting face seals operating under simulated gas turbine conditions are given. Also a spiral groove seal design operated to 244 m/sec (800 ft/sec) is described.

  10. Bioaccumulation of radiocaesium in Arctic seals.

    PubMed

    Carroll, Jolynn; Wolkers, Hans; Andersen, Magnus; Rissanen, Kristina

    2002-12-01

    Seals are high trophic level feeders that bioaccumulate many contaminants to a greater degree than most lower trophic level organisms. Their trophic status in the marine food web and wide-spread distribution make seals useful sentinels of arctic environmental change. The purpose of this investigation is to document the levels and bioaccumulation potential of radiocaesium in high latitude seal species for which data have not previously been available. The study was carried out on harp, ringed, and bearded seals caught north of the island archipelago of Svalbard (82 degrees N) in 1999. The results are then compared with previous studies in order to elucidate factors responsible for bioaccumulation in Arctic seals. Concentrations of 137Cs were determined in muscle, liver and kidney samples from a total of 10 juvenile and one adult seal. The mean concentration in muscle samples for all animals was 0.23 +/- 0.045 Bq/kg f.w. 137Cs concentrations in both liver and kidney samples were near detection limits (approximately 0.2 Bq/kg f.w.). The results are consistent with previous studies indicating low levels of radiocaesium in Arctic seals in response to a long term trend of decreasing levels of 137Cs in the Barents Sea region. Bioconcentration factors (BCFs) estimated for seals from NE Svalbard are low, ranging from 34 to 130. Comparing these values with reported BCFs for Greenland seals from other sectors of the European Arctic, we suggest that the combination of physiological and ecological factors on radiocaesium bioaccumulation is comparable among different Arctic seal populations. The application of this work to Arctic monitoring and assessment programs is discussed. PMID:12523541

  11. SEALING MEANS FOR RELATIVELY ROTATABLE MEMBERS

    DOEpatents

    Skarstrom, C.S.

    1960-10-25

    A sealing means is offered for maintaining a seal between a pair of relatively rotatable members, panticularly between a rotating shaft and a stationary member surrounding the shaft. The sealing is accomplished by means of a flange extending outward radially on each of a plurality of sealing rings mounted on the rotating member which fit into annular grooves in the stationary member and are held in sealing relation therewith by means of spring rings. In addition, means are provided for passing a sealing gas through the seal sunfaces to prevent accumulation of lubricant and for scavenging any gas which may have leaked from the internal member into the seal area.

  12. Microstructural Characterization and Mechanical Performance of Wafer-Level SLID Bonded Au-Sn and Cu-Sn Seal Rings for MEMS Encapsulation

    NASA Astrophysics Data System (ADS)

    Rautiainen, Antti; Xu, Hongbo; Österlund, Elmeri; Li, Jue; Vuorinen, Vesa; Paulasto-Kröckel, Mervi

    2015-11-01

    Special applications, such as microelectromechanical systems (MEMS), often require hermetic sealing in order to achieve a desired operation. Solid-liquid interdiffusion (SLID) bonding is an attractive method for encapsulating MEMS devices at the wafer-level, providing, e.g., high re-melt temperatures and tolerance for topographical variations. Several different SLID bond solutions have been investigated; however, there are only a limited number of published reliability studies available. In this paper, wafer-level Au-Sn and Cu-Sn SLID seal rings were mechanically characterized with shear and tensile tests. The evolution of bond microstructures and consequent effects on mechanical reliability were evaluated with a mixed flow gas test, a high temperature storage test and a thermal shock (TS) test. Virgin samples showed high mechanical strength. The Au-Sn system, with a thin Ni layer between the TiW adhesion layer and the bond, demonstrated a shear strength of 170 MPa. Cu-Sn, with a Cu-Cu3Sn-Cu structure, exhibited a shear strength of 275 MPa. Statistically significant decreases in strength were identified after reliability tests. The shear strength of the Au-Sn bond with an (AuSn + Au5Sn)eut structure decreased 40% in a corrosive environment. After 3000 TS cycles, the tensile strength of the Cu-Sn bond reduced by 45%. Fracture surface analysis revealed through-bond failures that were not observed previously. In cross-sectional analysis, vertical cracks were observed, which may contribute to the decrease in tensile strength.

  13. Face seal assembly for rotating drum

    DOEpatents

    Morgan, J. Giles; Rennich, Mark J.; Whatley, Marvin E.

    1982-01-01

    A seal assembly comprises a tube rotatable about its longitudinal axis and having two longitudinally spaced flanges projecting radially outwardly from the outer surface thereof. Slidably positioned against one of the flanges is a seal ring, and disposed between this seal ring and the other flange are two rings that are forced apart by springs, one of the latter rings being attached to a flexible wall.

  14. Seal designing of theodolite used in seaside environment

    NASA Astrophysics Data System (ADS)

    Jin, Humin; Yan, Xiaoxu; Hao, Wei; Zhou, Sizhong

    2014-08-01

    Based on the environment requirements in seaside there exists static and dynamic seal designing for the photoelectric Theodolite. Static seal designing emphatically includes the designing of o-ring size and mechanical property analysis of o-ring seal, which is difficult to adopt conventional dynamic seal to meet the requirements. According to practical application, the combination of the radial labyrinth seal and high quality felt seal are designed. The combination seal which better solves the seal problem of narrow radial size is a good way of dynamic seal. At the same time, there is engineering practice needing to proof the radial labyrinth seal.

  15. Solid rocket booster joint seal analyses

    NASA Technical Reports Server (NTRS)

    Moore, Carleton J.

    1987-01-01

    O-ring response and sealing in pressurized shell structures is examined. The study found that the key elements in the failure of the seal to be joint opening and rotation, assembly out of roundness, and O-ring seal response.

  16. Newborn GnRH neurons in the adult forebrain of the ring dove.

    PubMed

    Cheng, Mei-Fang; Alexander, Katherine; Zhou, Shiliang; Bonder, Edward; Chuang, Ling-Shiang

    2011-06-01

    The preoptic area of the hypothalamus is a key area that produces gonadotrophin-releasing hormone (GnRH). In birds, the chicken GnRH-I-form neurons are responsible for the hypothalamus-pituitary-gonadal system, which controls reproduction. In the ring dove, electrolytic lesion in the adult hypothalamus induces neurogenesis. In this study, we determined whether adult neurogenesis is involved in repairing GnRH neurons, specifically by generating newborn cells exhibiting GnRH-I immunoreactive properties. We selectively applied electrolytic lesions to three different regions of the diencephalon, including the preoptic area, which contains GnRH-I neurons, and identified new cells (BrdU-positive cells) that co-labeled with GnRH-I-immunoreactive cells. The BrdU(+)/GnRH(+) double labeled cells were then confirmed with confocal laser analysis. In brains of both male and female ring doves we found new neurons at the lesion site of the preoptic region that were GnRH-I immunoreactive. However, the total number of GnRH neurons in the lesioned brains was less than that of sham-lesioned brains. When two other regions of the diencephalon that contain GnRH-I neurons were damaged, no recruitment of new GnRH-I neurons was detected. The rate of neurogenesis depends on the bird's reproductive phase when the lesion was applied. We found BrdU(+)/GnRH(+) double-labeled cells almost exclusively during the pre-laying phase when birds are engaged in active courtship that leads to egg laying. Our observations suggest that recruitment of GnRH immunoreactive new neurons is restricted to the hypothalamic region and is sensitive to the reproductive stage of the birds. PMID:21443878

  17. Report of tests carried out on Viton O-ring seals to assess suitability for operation over the temperature range {minus}40 C to +220 C when used in Package Design 2863B

    SciTech Connect

    1996-12-31

    To satisfy the requirements of US Regulatory bodies the O-ring seals in the containment vessels of Package Design 2863B have to be shown to operate satisfactorily (i.e. remain leaktight) at the extremes of temperature that they are expected to experience during both normal and hypothetical accident conditions of transport. For Package Design 2863B this effectively means that the seals must remain leaktight over the temperature range {minus}40 C to + 220 C, but to ensure that an adequate safety margin exists the seals should preferably remain leaktight over the range {minus}50 C to +250 C. This test report describes the procedures and results of tests carried out on Viton seals over the temperature range {minus}50 C to +250 C. The variability of the results at low temperature, by both pressure drop and helium leakage testing, would indicate that the particular formulation of Viton tested cannot be used to provide a reliable leaktight seal at {minus}40 C. Although the results of the pressure drop tests at high temperature were satisfactory, insufficient testing has been carried out using helium leakage testing to draw a firm conclusion about the high temperature performance of the material tested.

  18. Fortuitous Encounters between Seagliders and Adult Female Northern Fur Seals (Callorhinus ursinus) off the Washington (USA) Coast: Upper Ocean Variability and Links to Top Predator Behavior

    PubMed Central

    Pelland, Noel A.; Sterling, Jeremy T.; Lea, Mary-Anne; Bond, Nicholas A.; Ream, Rolf R.; Lee, Craig M.; Eriksen, Charles C.

    2014-01-01

    Behavioral responses by top marine predators to oceanographic features such as eddies, river plumes, storms, and coastal topography suggest that biophysical interactions in these zones affect predators' prey, foraging behaviors, and potentially fitness. However, examining these pathways is challenged by the obstacles inherent in obtaining simultaneous observations of surface and subsurface environmental fields and predator behavior. In this study, migratory movements and, in some cases, diving behavior of 40 adult female northern fur seals (NFS; Callorhinus ursinus) were quantified across their range and compared to remotely-sensed environmental data in the Gulf of Alaska and California Current ecosystems, with a particular focus off the coast of Washington State (USA) – a known foraging ground for adult female NFS and where autonomous glider sampling allowed opportunistic comparison of seal behavior to subsurface biophysical measurements. The results show that in these ecosystems, adult female habitat utilization was concentrated near prominent coastal topographic, riverine, or inlet features and within 200 km of the continental shelf break. Seal dive depths, in most ecosystems, were moderated by surface light level (solar or lunar), mirroring known behaviors of diel vertically-migrating prey. However, seal dives differed in the California Current ecosystem due to a shift to more daytime diving concentrated at or below the surface mixed layer base. Seal movement models indicate behavioral responses to season, ecosystem, and surface wind speeds; individuals also responded to mesoscale eddies, jets, and the Columbia River plume. Foraging within small scale surface features is consistent with utilization of the inner coastal transition zone and habitats near coastal capes, which are known eddy and filament generation sites. These results contribute to our knowledge of NFS migratory patterns by demonstrating surface and subsurface behavioral responses to a spatially

  19. Fortuitous encounters between seagliders and adult female northern fur seals (Callorhinus ursinus) off the Washington (USA) coast: upper ocean variability and links to top predator behavior.

    PubMed

    Pelland, Noel A; Sterling, Jeremy T; Lea, Mary-Anne; Bond, Nicholas A; Ream, Rolf R; Lee, Craig M; Eriksen, Charles C

    2014-01-01

    Behavioral responses by top marine predators to oceanographic features such as eddies, river plumes, storms, and coastal topography suggest that biophysical interactions in these zones affect predators' prey, foraging behaviors, and potentially fitness. However, examining these pathways is challenged by the obstacles inherent in obtaining simultaneous observations of surface and subsurface environmental fields and predator behavior. In this study, migratory movements and, in some cases, diving behavior of 40 adult female northern fur seals (NFS; Callorhinus ursinus) were quantified across their range and compared to remotely-sensed environmental data in the Gulf of Alaska and California Current ecosystems, with a particular focus off the coast of Washington State (USA)--a known foraging ground for adult female NFS and where autonomous glider sampling allowed opportunistic comparison of seal behavior to subsurface biophysical measurements. The results show that in these ecosystems, adult female habitat utilization was concentrated near prominent coastal topographic, riverine, or inlet features and within 200 km of the continental shelf break. Seal dive depths, in most ecosystems, were moderated by surface light level (solar or lunar), mirroring known behaviors of diel vertically-migrating prey. However, seal dives differed in the California Current ecosystem due to a shift to more daytime diving concentrated at or below the surface mixed layer base. Seal movement models indicate behavioral responses to season, ecosystem, and surface wind speeds; individuals also responded to mesoscale eddies, jets, and the Columbia River plume. Foraging within small scale surface features is consistent with utilization of the inner coastal transition zone and habitats near coastal capes, which are known eddy and filament generation sites. These results contribute to our knowledge of NFS migratory patterns by demonstrating surface and subsurface behavioral responses to a spatially

  20. Internal coaxial cable seal system

    DOEpatents

    Hall, David R.; Sneddon, Cameron; Dahlgren, Scott Steven; Briscoe, Michael A.

    2006-07-25

    The invention is a seal system for a coaxial cable and is placed within the coaxial cable and its constituent components. A series of seal stacks including load ring components and elastomeric rings are placed on load bearing members within the coaxial cable sealing the annular space between the coaxial cable and an electrical contact passing there through. The coaxial cable is disposed within drilling components to transmit electrical signals between drilling components within a drill string. The seal system can be used in a variety of downhole components, such as sections of pipe in a drill string, drill collars, heavy weight drill pipe, and jars.

  1. Cryogenic seal concept for static and dynamic conditions

    NASA Technical Reports Server (NTRS)

    De Gaetano, E. A.

    1968-01-01

    Seal rings reduce cryogenic pump seal leakage under static and dynamic conditions. The rings are fitted into annular diaphragms, which are affected by cryogenic pressure and temperature, to move against a mating ring, to increase seal-bearing loads under static conditions.

  2. Current-use pesticides in seawater and their bioaccumulation in polar bear-ringed seal food chains of the Canadian Arctic.

    PubMed

    Morris, Adam D; Muir, Derek C G; Solomon, Keith R; Letcher, Robert J; McKinney, Melissa A; Fisk, Aaron T; McMeans, Bailey C; Tomy, Gregg T; Teixeira, Camilla; Wang, Xiaowa; Duric, Mark

    2016-07-01

    The distribution of current-use pesticides (CUPs) in seawater and their trophodynamics were investigated in 3 Canadian Arctic marine food chains. The greatest ranges of dissolved-phase concentrations in seawater for each CUP were endosulfan sulfate (less than method detection limit (MDL) to 19 pg L(-1) ) > dacthal (0.76-15 pg L(-1) ) > chlorpyrifos (less than MDL to 8.1 pg L(-1) ) > pentachloronitrobenzene (less than MDL to 2.6 pg L(-1) ) > α-endosulfan (0.20-2.3 pg L(-1) ). Bioaccumulation factors (BAFs, water-respiring organisms) were greatest in plankton, including chlorothalonil (log BAF = 7.4 ± 7.1 L kg(-1) , mean ± standard error), chlorpyrifos (log BAF = 6.9 ± 6.7 L kg(-1) ), and α-endosulfan (log BAF = 6.5 ± 6.0 L kg(-1) ). The largest biomagnification factors (BMFs) were found for dacthal in the capelin:plankton trophic relationship (BMF = 13 ± 5.0) at Cumberland Sound (Nunvavut), and for β-endosulfan (BMF = 16 ± 4.9) and α-endosulfan (BMF = 9.3 ± 2.8) in the polar bear-ringed seal relationship at Barrow and Rae Strait (NU), respectively. Concentrations of endosulfan sulfate exhibited trophic magnification (increasing concentrations with increasing trophic level) in the poikilothermic portion of the food web (trophic magnification factor = 1.4), but all of the CUPs underwent trophic dilution in the marine mammal food web, despite some trophic level-specific biomagnification. Together, these observations are most likely indicative of metabolism of these CUPs in mammals. Environ Toxicol Chem 2016;35:1695-1707. © 2016 SETAC. PMID:27027986

  3. Compliant high temperature seals for dissimilar materials

    DOEpatents

    Rynders, Steven Walton; Minford, Eric; Tressler, Richard Ernest; Taylor, Dale M.

    2001-01-01

    A high temperature, gas-tight seal is formed by utilizing one or more compliant metallic toroidal ring sealing elements, where the applied pressure serves to activate the seal, thus improving the quality of the seal. The compliant nature of the sealing element compensates for differences in thermal expansion between the materials to be sealed, and is particularly useful in sealing a metallic member and a ceramic tube art elevated temperatures. The performance of the seal may be improved by coating the sealing element with a soft or flowable coating such as silver or gold and/or by backing the sealing element with a bed of fine powder. The material of the sealing element is chosen such that the element responds to stress elastically, even at elevated temperatures, permitting the seal to operate through multiple thermal cycles.

  4. Effect of seals on rotor systems

    NASA Technical Reports Server (NTRS)

    Fleming, D. P.

    1982-01-01

    Seals can exert large forces on rotors. As an example, in turbopump ring seals film stiffness as high as 90 MN/m (500,000 lb/in) have been calculated. This stiffness is comparable to the stiffness of rotor support bearings; thus seals can play an important part in supporting and stabilizing rotor systems. The work done to determine forces generated in ring seals is reviewed. Working formulas are presented for seal stiffness and damping, and geometries to maximize stiffness are discussed. An example is described where a change in seal design stabilized a previously unstable rotor.

  5. Foil Face Seal Testing

    NASA Technical Reports Server (NTRS)

    Munson, John

    2009-01-01

    In the seal literature you can find many attempts by various researchers to adapt film riding seals to the gas turbine engine. None have been successful, potential distortion of the sealing faces is the primary reason. There is a film riding device that does accommodate distortion and is in service in aircraft applications, namely the foil bearing. More specifically a foil thrust bearing. These are not intended to be seals, and they do not accommodate large axial movement between shaft & static structure. By combining the 2 a unique type of face seal has been created. It functions like a normal face seal. The foil thrust bearing replaces the normal primary sealing surface. The compliance of the foil bearing allows the foils to track distortion of the mating seal ring. The foil seal has several perceived advantages over existing hydrodynamic designs, enumerated in the chart. Materials and design methodology needed for this application already exist. Also the load capacity requirements for the foil bearing are low since it only needs to support itself and overcome friction forces at the antirotation keys.

  6. Control line sealing connection

    SciTech Connect

    Tohill, H.O.

    1984-07-10

    A sealing connection for the passage of a fluid control line through adjoining members is claimed. The connection comprises a metallic tubular sealing element provided with tapered end portions, each end having internal frusto-conical surfaces and external frusto-conical surfaces in coaxial alignment with the bore through the element. The external frusto-conical surfaceas provide metal-to-metal sealing with aligned frusto-conical seating surfaces in opposed pockets formed in aligned portions of the control line at their respective openings at the adjoining surfaces of the adjoined member. The tubular sealing element is subjected to axial compression between the frusto-conical pocket seating surfaces when the adjoined members are bolted tightly together which results in deformation of its tapered end portions to provide metal-to-metal sealing with the adjoined members which is effective to seal against both internal and external fluid pressurization of the control line and without internally obstructing or restricting the control line. Secondary sealing is provided by elastomeric O-ring seals mounted in circumferential annular grooves formed in the exterior of the tubular sealing element.

  7. Acoustic Seal

    NASA Technical Reports Server (NTRS)

    Steinetz, Bruce M. (Inventor)

    2006-01-01

    The invention relates to a sealing device having an acoustic resonator. The acoustic resonator is adapted to create acoustic waveforms to generate a sealing pressure barrier blocking fluid flow from a high pressure area to a lower pressure area. The sealing device permits noncontacting sealing operation. The sealing device may include a resonant-macrosonic-synthesis (RMS) resonator.

  8. Acoustic seal

    NASA Technical Reports Server (NTRS)

    Steinetz, Bruce M. (Inventor)

    2006-01-01

    The invention relates to a sealing device having an acoustic resonator. The acoustic resonator is adapted to create acoustic waveforms to generate a sealing pressure barrier blocking fluid flow from a high pressure area to a lower pressure area. The sealing device permits noncontacting sealing operation. The sealing device may include a resonant-macrosonic-synthesis (RMS) resonator.

  9. Fluid sealing

    SciTech Connect

    Nau, B.S.

    1987-01-01

    This book contains 41 papers. Some of the titles are: Evaluation of secondary containment seals for pumps on hydrocarbon duties; Valve steam sealing in nuclear plants; Design directives for liquid spattered labyrinth seals; Analysis of a novel rotary seal; Contacting mechanical seal design using a simplified hydrostatic model; and Transient thermoelastic effects in a mechanical face.

  10. Serum chemistry and antibodies against pathogens in antarctic fur seals, Weddell seals, crabeater seals, and Ross seals.

    PubMed

    Tryland, Morten; Nymo, Ingebjørg H; Nielsen, Ole; Nordøy, Erling S; Kovacs, Kit M; Krafft, Bjørn A; Thoresen, Stein I; Åsbakk, Kjetil; Osterrieder, Klaus; Roth, Swaantje J; Lydersen, Christian; Godfroid, Jacques; Blix, Arnoldus S

    2012-07-01

    Information on health parameters, such as antibody prevalences and serum chemistry that can reveal exposure to pathogens, disease, and abnormal physiologic conditions, is scarce for Antarctic seal species. Serum samples from Antarctic fur seals (Arctocephalus gazella, n=88) from Bouvetøya (2000-2001 and 2001-2002), and from Weddell seals (Leptonychotes weddellii, n=20), Ross seals (Ommatophoca rossii, n=20), and crabeater seals (Lobodon carcinophagus, n=9) from the pack-ice off Queen Maud Land, Antarctica (2001) were analyzed for enzyme activity, and concentrations of protein, metabolites, minerals, and cortisol. Adult Antarctic fur seal males had elevated levels of total protein (range 64-99 g/l) compared to adult females and pups (range 52-79 g/l). Antarctic fur seals had higher enzyme activities of creatine kinase, lactate dehydrogenase, and amylase, compared to Weddell, Ross, and crabeater seals. Antibodies against Brucella spp. were detected in Weddell seals (37%), Ross seals (5%), and crabeater seals (11%), but not in Antarctic fur seals. Antibodies against phocine herpesvirus 1 were detected in all species examined (Antarctic fur seals, 58%; Weddell seals, 100%; Ross seals, 15%; and crabeater seals, 44%). No antibodies against Trichinella spp., Toxoplasma, or phocine distemper virus (PDV) were detected (Antarctic fur seals were not tested for PDV antibodies). Antarctic seals are challenged by reduced sea ice and increasing temperatures due to climate change, and increased anthropogenic activity can introduce new pathogens to these vulnerable ecosystems and represent a threat for these animals. Our data provide a baseline for future monitoring of health parameters of these Antarctic seal species, for tracking the impact of environmental, climatic, and anthropogenic changes in Antarctica over time. PMID:22740529

  11. Gland With Cantilever Seal

    NASA Technical Reports Server (NTRS)

    Melton, Patrick B.

    1989-01-01

    Single-piece gland forms tight seal on probe or tube containing liquid or gas at high pressure. Gland and probe align as assembled by simple torquing procedure. Disconnected easily and reused at same site. Made from any of wide variety of materials so compatible with application. Cantilever ring at top of gland bites into wall of tube or probe, sealing it. Wall of tube or probe must be thick enough to accommodate deformation without rupturing. Maximum deformation designed in coordination with seating and deformation of boss or conical seal.

  12. Placement Of O-Rings In Solid Rocket Booster

    NASA Technical Reports Server (NTRS)

    Wood, Charles

    1991-01-01

    Brief report proposes to modify placement of O-ring seals in joints of Solid Rocket Booster of Space Shuttle. Modified joint and seal essentially "inside-out" version of old joint and seal. O-rings placed between outer side of tang and clevis. Joint rotation pushes tang harder against O-rings, thereby making even tighter seal. Proposal derived from analysis of Space Shuttle Challenger disaster, attributed to failure of these O-ring seals.

  13. Compliant seal development

    NASA Technical Reports Server (NTRS)

    Hendricks, Robert C.

    1993-01-01

    The compliant metallic seal combines the noncontact feature of the labyrinth seal, the low leakage of a mechanical seal, and the compliant nature of the brush seal. It consists of several thin metallic elements or leaves mounted within a ring which is press fit into the housing, and in form, sort of resembles a lip seal sections wiping the shaft. A second set of overlapping cover leaves are placed on top of the shaft riding leaves which reduces leakage and provides stiffness. The leaves can be straight or angle cut. The shaft riding fingers are designed with mismatched curvature to provide lift off similar to the Rayleigh lift pads in mechanical seals with leading edge clearances nearly twice those of the trailing edge as as shown by Fleming to be optimal for gas flows in convergent seal passages. Leading edge clearances range from 300 to 500 microinches. Balance pockets beneath the leaves provide fluid film feed to the 'Rayleigh lift' surface and the proper balance ratio (mechanical seal) when combined with the static pressure and film pressure. The leaves flex in the radial direction and accommodate thermomechanical behavior as well as axial motion and angular misalignment. In the static mode, there is a net closing force on the leaves. The seals were tested to 70 psi at speeds to 16,000 rpm or surface speeds to 330 fps and temperatures from ambient to 440 F. A slow cycle through the rig critical at 10,000 rpm induced a radial vibration response of 0.004 to 0.005 inch were accommodated by the seal. Preliminary performance data are encouraging demonstrating hydrodynamic liftoff and noncontacting operation at pressure and speeds typical of gas turbine engines. The leakage performance data are significantly better than commercial labyrinth and brush seals which should be expected as this design incorporates the features of the low leakage face or mechanical seal along with the flexibility of the brush configuration.

  14. Compliant seal development

    NASA Astrophysics Data System (ADS)

    Hendricks, Robert C.

    1993-10-01

    The compliant metallic seal combines the noncontact feature of the labyrinth seal, the low leakage of a mechanical seal, and the compliant nature of the brush seal. It consists of several thin metallic elements or leaves mounted within a ring which is press fit into the housing, and in form, sort of resembles a lip seal sections wiping the shaft. A second set of overlapping cover leaves are placed on top of the shaft riding leaves which reduces leakage and provides stiffness. The leaves can be straight or angle cut. The shaft riding fingers are designed with mismatched curvature to provide lift off similar to the Rayleigh lift pads in mechanical seals with leading edge clearances nearly twice those of the trailing edge as as shown by Fleming to be optimal for gas flows in convergent seal passages. Leading edge clearances range from 300 to 500 microinches. Balance pockets beneath the leaves provide fluid film feed to the 'Rayleigh lift' surface and the proper balance ratio (mechanical seal) when combined with the static pressure and film pressure. The leaves flex in the radial direction and accommodate thermomechanical behavior as well as axial motion and angular misalignment. In the static mode, there is a net closing force on the leaves. The seals were tested to 70 psi at speeds to 16,000 rpm or surface speeds to 330 fps and temperatures from ambient to 440 F. A slow cycle through the rig critical at 10,000 rpm induced a radial vibration response of 0.004 to 0.005 inch were accommodated by the seal. Preliminary performance data are encouraging demonstrating hydrodynamic liftoff and noncontacting operation at pressure and speeds typical of gas turbine engines. The leakage performance data are significantly better than commercial labyrinth and brush seals which should be expected as this design incorporates the features of the low leakage face or mechanical seal along with the flexibility of the brush configuration.

  15. Ring1b bookmarks genes in pancreatic embryonic progenitors for repression in adult β cells.

    PubMed

    van Arensbergen, Joris; García-Hurtado, Javier; Maestro, Miguel Angel; Correa-Tapia, Miguel; Rutter, Guy A; Vidal, Miguel; Ferrer, Jorge

    2013-01-01

    Polycomb-mediated gene repression is essential for embryonic development, yet its precise role in lineage-specific programming is poorly understood. Here we inactivated Ring1b, encoding a polycomb-repressive complex 1 subunit, in pancreatic multipotent progenitors (Ring1b(progKO)). This caused transcriptional derepression of a subset of direct Ring1b target genes in differentiated pancreatic islet cells. Unexpectedly, Ring1b inactivation in differentiated islet β cells (Ring1b(βKO)) did not cause derepression, even after multiple rounds of cell division, suggesting a role for Ring1b in the establishment but not the maintenance of repression. Consistent with this notion, derepression in Ring1b(progKO) islets occurred preferentially in genes that were targeted de novo by Ring1b during pancreas development. The results support a model in which Ring1b bookmarks its target genes during embryonic development, and these genes are maintained in a repressed state through Ring1b-independent mechanisms in terminally differentiated cells. This work provides novel insights into how epigenetic mechanisms contribute to shaping the transcriptional identity of differentiated lineages. PMID:23271347

  16. Taper-seal type metal sealing system and available applications

    NASA Astrophysics Data System (ADS)

    Kurokouchi, Satoshi; Okabe, Masayuki; Morita, Shinsaku

    2001-01-01

    A conventional disk (flat ring) gasket for ConFlat ® sealing system has been commonly applied to commercially available equipments for ultrahigh vacuum systems. However, its large redundant part which wastes the tightening force makes its handling and seal reliability problematic. We examine a taper-seal type gasket, which is newly designed to improve the inefficiency of ConFlat mechanism using conventional disk gaskets. It is remarked that the obtained seal area on a taper-seal type gasket is 1.6˜3.7 times larger than that of a conventional disk gasket. Our numencal results on stress distributions in a tightened gasket indicate that taper-seal gasket realizes highly stable seal pressure even under a lower tightening torque. High sealing reliability is thus achieved as expected which is mainly due to the wide seal area and stable seal pressure realized even for rather hard gasket material. Taper-seal type gasket also has some practical advantages. The most important of them may be that it enables to construct new edgeless metal sealing systems without a welded heavy flange. Here, edgeless sealing systems are composed of highly flexible incorporating viewports, bellows, feedthroughs, and blank-off covers, as well as any other conventional vacuum components.

  17. Carbon sources and trophic relationships of ice seals during recent environmental shifts in the Bering Sea.

    PubMed

    Wang, Shiway W; Springer, Alan M; Budge, Suzanne M; Horstmann, Lara; Quakenbush, Lori T; Wooller, Matthew J

    2016-04-01

    Dramatic multiyear fluctuations in water temperature and seasonal sea ice extent and duration across the Bering-Chukchi continental shelf have occurred in this century, raising a pressing ecological question: Do such environmental changes alter marine production processes linking primary producers to upper trophic-level predators? We examined this question by comparing the blubber fatty acid (FA) composition and stable carbon isotope ratios of individual FA (δ¹³CFA) of adult ringed seals (Pusa hispida), bearded seals (Erignathus barbatus), spotted seals (Phoca largha), and ribbon seals (Histriophoca fasciata), collectively known as "ice seals," sampled during an anomalously warm, low sea ice period in 2002-2005 in the Bering Sea and a subsequent cold, high sea ice period in 2007-2010. δ¹³C(FA) values, used to estimate the contribution to seals of carbon derived from sea ice algae (sympagic production) relative to that derived from water column phytoplankton (pelagic production), indicated that during the cold period, sympagic production accounted for 62-80% of the FA in the blubber of bearded seals, 51-62% in spotted seals, and 21-60% in ringed seals. Moreover, the δ¹³CFA values of bearded seals indicated a greater incorporation of sympagic FAs during the cold period than the warm period. This result provides the first empirical evidence of an ecosystem-scale effect of a putative change in sympagic production in the Western Arctic. The FA composition of ice seals showed clear evidence of resource partitioning among ringed, bearded, and spotted seals, and little niche separation between spotted and ribbon seals, which is consistent with previous studies. Despite interannual variability, the FA composition of ringed and bearded seals showed little evidence of differences in diet between the warm and cold periods. The findings that sympagic production contributes significantly to food webs supporting ice seals, and that the contribution apparently is less in

  18. Self sealing disconnect for tubing forms metal seal after breakaway

    NASA Technical Reports Server (NTRS)

    Gernandt, H. H.

    1964-01-01

    Disconnect fittings form a positive metal seal when the fill tube pulls against a metal sleeve when disconnected by force. A specially designed sleeve surrounds the fill tube. O-rings in the shoulder of the sleeve and near the outer end of the fill tube seal against leakage.

  19. Metabolic responses to adrenocorticotropic hormone (ACTH) vary with life-history stage in adult male northern elephant seals.

    PubMed

    Ensminger, David C; Somo, Derek A; Houser, Dorian S; Crocker, Daniel E

    2014-08-01

    Strong individual and life-history variation in serum glucocorticoids has been documented in many wildlife species. Less is known about variation in hypothalamic-pituitary-adrenal (HPA) axis responsiveness and its impact on metabolism. We challenged 18 free-ranging adult male northern elephant seals (NES) with an intramuscular injection of slow-release adrenocorticotropic hormone (ACTH) over 3 sample periods: early in the breeding season, after 70+ days of the breeding fast, and during peak molt. Subjects were blood sampled every 30 min for 2h post-injection. Breeding animals were recaptured and sampled at 48 h. In response to the ACTH injection, cortisol increased 4-6-fold in all groups, and remained elevated at 48 h in early breeding subjects. ACTH was a strong secretagogue for aldosterone, causing a 3-8-fold increase in concentration. Cortisol and aldosterone responses did not vary between groups but were correlated within individuals. The ACTH challenge produced elevations in plasma glucose during late breeding and molting, suppressed testosterone and thyroid hormone at 48 h in early breeding, and increased plasma non-esterified fatty acids and ketoacids during molting. These data suggest that sensitivity of the HPA axis is maintained but the metabolic impacts of cortisol and feedback inhibition of the axis vary with life history stage. Strong impacts on testosterone and thyroid hormone suggest the importance of maintaining low cortisol levels during the breeding fast. These data suggest that metabolic adaptations to extended fasting in NES include alterations in tissue responses to hormones that mitigate deleterious impacts of acute or moderately sustained stress responses. PMID:24798580

  20. Hermetic metal seals for Stirling engines

    SciTech Connect

    White, M.A.; Emigh, S.G.; Gray, D.M.; Krogness, J.C.; Noble, J.E.; Olam, R.W.; Oster, J.F.; Riggle, P.

    1984-08-01

    Dynamic seals continue to be one of the major technical problems facing Stirling engine designers. Much effort has been expended to develop the quasi-hermetic rolling diaphragm or rollsock seal, but unpredictable lifetime has resulted in general disuse of this once promising seal. Most modern engines use some version of the Leningrader sliding seal for rod seals and a dry ring seal for piston and/or displacer seals. Reliable long-life seals remain an elusive goal. This paper documents the successful hardware implementation of metal bellows and diaphragm seals in two long-life Stirling engine applications with test data to >10/sup 10/ cycles and discusses bellows seal concepts which can provide reliable and efficient longlife seals for virtually any Stirling engine application.

  1. High temperature autoclave vacuum seals

    NASA Technical Reports Server (NTRS)

    Hoffman, J. R.; Simpson, W. G.; Walker, H. M.

    1971-01-01

    Aluminum sheet forms effective sealing film at temperatures up to 728 K. Soft aluminum wire rings provide positive seal between foil and platen. For applications at temperatures above aluminum's service temperature, stainless steel is used as film material and copper wire as sealant.

  2. Oil Saving Seal

    NASA Technical Reports Server (NTRS)

    1978-01-01

    Driven under difficult field conditions, the Army Jeep shown went more than 22,000 miles without an oil change in a test conducted by the U.S. Army Mobility Equipment Research and Development Command. Key to this exceptionally long oil life was a set of piston ring seals made of a new synthetic rubber formula called RC-34; the seal pictured, photographed after its arduous Army trial, shows no signs of deterioration. The seal and the RC-34 material, which may soon be available for use in the family auto, were developed by Ramsey Corporation, St. Louis, Missouri, a division of TRW Automotive Worldwide. The oil in an automobile engine must be I replaced every few thousand miles not because it wears out but because it becomes contaminated. The contamination sources are gasoline and combustion gases which blow by the piston rings to mix with the oil, reducing the oil's ability to lubricate properly. Seeking to prolong oil life by eliminating "blowby," Ramsey Corporation looked for a better way to seal piston rings and used NASA technology as a departure point. The parent company TRW, under contract to NASA's Jet Propulsion Laboratory, had developed seals and bladders from a type of material called elastomers which where designed to withstand the environmental extremes of interplanetary flight. That effort formed a knowledge base for research which culminated in Ramsey's RC-34 elastomer.

  3. Glass sealing

    SciTech Connect

    Brow, R.K.; Kovacic, L.; Chambers, R.S.

    1996-04-01

    Hernetic glass sealing technologies developed for weapons component applications can be utilized for the design and manufacture of fuel cells. Design and processing of of a seal are optimized through an integrated approach based on glass composition research, finite element analysis, and sealing process definition. Glass sealing procedures are selected to accommodate the limits imposed by glass composition and predicted calculations.

  4. Damping device for a stationary labyrinth seal

    NASA Technical Reports Server (NTRS)

    El-Aini, Yehia M. (Inventor); Mitchell, William S. (Inventor); Roberts, Lawrence P. (Inventor); Montgomery, Stuart K. (Inventor); Davis, Gary A. (Inventor)

    2010-01-01

    A stationary labyrinth seal system includes a seal housing having an annular cavity, a plurality of damping devices, and a retaining ring. The damping devices are positioned within the annular cavity and are maintained within the annular cavity by the retaining ring.

  5. Inflatable-Seal Assembly For Cryogenic Fluids

    NASA Technical Reports Server (NTRS)

    Buehler, Kurt; Fesmire, James E.

    1989-01-01

    Connector for cryogenic fluid lines quickly joined or separated, seals tightly, and reduces transfer of heat to fluid. Features redundant sealing rings inflated after joining so they wedge tightly against connector base, preventing leakage. Cylinder of FEP inflatable. Pair of threaded stainless-steel rings - one at each end of cylinder - secure cylinder in quick-disconnect assembly.

  6. Coining seal

    DOEpatents

    Mancebo, Lloyd

    1976-01-01

    A bakeable high pressure-vacuum seal is provided in which an inductile sealing element having a butterfly shaped crosssection with protruding sharp edges at each of the four corners, is sandwiched between two ductile sealing elements, the sandwiched assembly then being compressed between the surfaces of the flange elements of a high pressure or high vacuum vessel to coin the ductile sealing element into the surface of the inductile sealing element as well as the surfaces of the flange elements.

  7. Sealing device

    SciTech Connect

    Garcia-Crespo, Andres Jose

    2013-12-10

    A sealing device for sealing a gap between a dovetail of a bucket assembly and a rotor wheel is disclosed. The sealing device includes a cover plate configured to cover the gap and a retention member protruding from the cover plate and configured to engage the dovetail. The sealing device provides a seal against the gap when the bucket assemply is subjected to a centrifugal force.

  8. Rotatable seal assembly

    DOEpatents

    Logan, Clinton M.; Garibaldi, Jack L.

    1982-01-01

    An assembly is provided for rotatably supporting a rotor on a stator so that vacuum chambers in the rotor and stator remain in communication while the chambers are sealed from ambient air, which enables the use of a ball bearing or the like to support most of the weight of the rotor. The apparatus includes a seal device mounted on the rotor to rotate therewith, but shiftable in position on the rotor while being sealed to the rotor as by an O-ring. The seal device has a flat face that is biased towards a flat face on the stator, and pressurized air is pumped between the faces to prevent contact between them while spacing them a small distance apart to avoid the inflow of large amounts of air between the faces and into the vacuum chambers.

  9. Positive fast sealing union connections

    NASA Technical Reports Server (NTRS)

    Kleber, C. M.

    1972-01-01

    Union connections are designed for connecting high pressure flexible hoses from gas storage manifolds to gas transport trailers. Connection uses O ring seals which can be quickly assembled and disassembled without use of wrenches, and which do not twist hose. Worn or damaged O rings are easily replaced.

  10. Mainshaft seals for small gas turbine engines

    NASA Technical Reports Server (NTRS)

    Ludwig, L. P.; Lynwander, P.

    1974-01-01

    An experimental evaluation of mainshaft seals for small gas turbine engines was conducted with shaft speeds to 213 m/s (700 ft/sec), air pressures to 148 Newtons per square centimeter abs. (215 psia), and air temperatures to 412k(282 F). A radial face seal incorporating self-acting geometry for lift augmentation was evaluated. In addition, three conventional carbon seal types (face, circumferential segmented, and rotating ring) were run for comparison. Test results indicated that the conventional seals used in this evaluation may not be satisfactory in future advanced engines because of excessive air leakage. On the other hand, the self-acting face seal was shown to have the potential capability of limiting leakages to one-half that of the conventional face seals and one-fifth that of conventional ring seals. A 150-hour endurance test of the self-acting face seal was conducted.

  11. Security seal

    DOEpatents

    Gobeli, Garth W.

    1985-01-01

    Security for a package or verifying seal in plastic material is provided by a print seal with unique thermally produced imprints in the plastic. If tampering is attempted, the material is irreparably damaged and thus detectable. The pattern of the imprints, similar to "fingerprints" are recorded as a positive identification for the seal, and corresponding recordings made to allow comparison. The integrity of the seal is proved by the comparison of imprint identification records made by laser beam projection.

  12. Turbomachine Sealing

    NASA Technical Reports Server (NTRS)

    Hendricks, Robert C.

    1996-01-01

    Designers and customers are demanding higher performance turbomachine systems that have long life between overhauls and satisfy the more restrictive environmental constraints. This overview provides sources of design data, numerical, and experimental results along with selected new seal configurations and static sealing challenges such as in the combustors. The following categories are presented: (1) Seal Rotordynamic Data Base (experimental analytical program at Texas A&M); (2) Secondary Flow Interactions (validation studies at CFDRC, Huntsville AL); (3) Contact Sealing (selected types with finger seal model); and (4) Environmental Constraints (emphasis on combustors).

  13. High-Temperature Seal for Sliding-Gate Valve

    NASA Technical Reports Server (NTRS)

    Leonard, R. G.

    1982-01-01

    Sliding-gate valve originally developed for rocket exhaust-gas ducts is sealed by a Belleville spring. It is simple, compact, and operates over a wider range of temperatures than conventional O-ring sealed valves.

  14. Seal assembly

    SciTech Connect

    Johnson, Roger Neal; Longfritz, William David

    2001-01-01

    A seal assembly that seals a gap formed by a groove comprises a seal body, a biasing element, and a connection that connects the seal body to the biasing element to form the seal assembly. The seal assembly further comprises a concave-shaped center section and convex-shaped contact portions at each end of the seal body. The biasing element is formed from an elastic material and comprises a convex-shaped center section and concave-shaped biasing zones that are opposed to the convex-shaped contact portions. The biasing element is adapted to be compressed to change a width of the seal assembly from a first width to a second width that is smaller than the first width. In the compressed state, the seal assembly can be disposed in the groove. After release of the compressing force, the seal assembly expands. The contact portions will move toward a surface of the groove and the biasing zones will move into contact with another surface of the groove. The biasing zones will bias the contact portions of the seal body against the surface of the groove.

  15. Development of helicopter transmission seals, task 2

    NASA Technical Reports Server (NTRS)

    Hayden, T. S.; Keller, C. H., Jr.

    1973-01-01

    High speed helicopter transmission seal concepts were designed, fabricated and tested. The concepts were a dual element split ring seal and a circumferential seal. The tests were performed in a rig using an actual input quill assembly. The test conditions were selected to simulate transmission operation and were 230 F oil temperature, and a sliding speed of 9400 ft/min. The split ring seal exhibited gross leakage and was considered unsatisfactory, while the circumferential seal leakage was less than 1 c.c./hour; this leakage is within acceptable limits. The circumferential seal wear was only to .0005 inches during a 100 hour run (40 starts and stops). During a 40 hour contamination test (mesh silica flour) the seal total wear was a maximum of .004 inches. This wear is considered acceptable.

  16. Mars containers - Dust on teflon sealing surfaces

    NASA Astrophysics Data System (ADS)

    Lauer, H. V., Jr.; Allton, J. H.

    As part of an evaluation of suitable hermetic seals for containers for Martian rock and soil samples, teflon o-ring static face seals were challenged with silica gel, basalt, and bentonite dust in several size ranges: 20-45 microns, 45-75 microns, and 75-125 microns. Seals were most tolerant of the soft bentonite dust and least tolerant of angular silica gel dust. Small amounts of 75-125 micron size particles can be accommodated by the teflon o-ring; however, the seals do not work well if smaller particles are concentrated enough to form layers more than 1 grain thick.

  17. Multiple internal seal right micro-electro-mechanical system vacuum package

    NASA Technical Reports Server (NTRS)

    Hayworth, Ken J. (Inventor); Yee, Karl Y. (Inventor); Shcheglov, Kirill V. (Inventor); Bae, Youngsam (Inventor); Wiberg, Dean V. (Inventor); Challoner, A. Dorian (Inventor); Peay, Chris S. (Inventor)

    2007-01-01

    A Multiple Internal Seal Ring (MISR) Micro-Electro-Mechanical System (MEMS) vacuum package that hermetically seals MEMS devices using MISR. The method bonds a capping plate having metal seal rings to a base plate having metal seal rings by wafer bonding the capping plate wafer to the base plate wafer. Bulk electrodes may be used to provide conductive paths between the seal rings on the base plate and the capping plate. All seals are made using only metal-to-metal seal rings deposited on the polished surfaces of the base plate and capping plate wafers. However, multiple electrical feed-through metal traces are provided by fabricating via holes through the capping plate for electrical connection from the outside of the package through the via-holes to the inside of the package. Each metal seal ring serves the dual purposes of hermetic sealing and providing the electrical feed-through metal trace.

  18. Advanced bristle seals for gas turbine engines

    NASA Astrophysics Data System (ADS)

    Cabe, Jerry L.

    1993-01-01

    A seven month proof-of-concept program was conducted for an advanced bristle seal, called a bush seal, for use in gas turbine engines. This program was performed as a Small Business Innovation Research (SBIR) Phase 1 project. Bush seal specimen and a full ring bush seal were designed, evaluated, and manufactured for testing. An analytical study of the potential of the bush seal relative to a labyrinth seal was conducted. Static and dynamic testing of the bush seal was performed to determine the behavior of the bristles under pressurization and during contact with a rotating labyrinth tooth. Stable behavior of the bristle elements was observed during static pressurization of a full ring bush seal. The dynamic testing of various configurations of bush seal against a rotating labyrinth tooth showed minimal wear of the bristles relative to a conventional labyrinth seal. The development and application of the bush seal concept to gas turbine engines has the potential of improving the engine's performance while decreasing the degradation of the seal performance over time.

  19. Shang Ring versus forceps-guided adult male circumcision: a randomized controlled effectiveness study in southwestern Uganda

    PubMed Central

    KANYAGO, Samuel; RIDING, David M; MUTAKOOHA, Elichum; de la O, Alcides Lopez; SIEDNER, Mark J

    2013-01-01

    Adult male circumcision (AMC) reduces HIV transmission but uptake is limited in part by current surgical methods. We randomized HIV-uninfected men (n=138) to receive Shang ring (SR) or forceps-guided (FG) AMC from a locally-trained surgeon. In as-treated analyses, more SR procedures were completed within 10 minutes (79% vs 0%, p<0.01) and more subjects reported high satisfaction (77% vs 58%, p=0.03). Healing time and pain scores were similar, though minor complication rates were higher in SR subjects (56% vs 24%, p<0.01). SR circumcision is a rapid and acceptable method of AMC and should be further evaluated to increase uptake of AMC. PMID:23599013

  20. Radial forces in a misaligned radial face seal

    NASA Technical Reports Server (NTRS)

    Etsion, I.

    1977-01-01

    Radial forces on the primary seal ring of a flat misaligned seal are analyzed, taking into account the radial variation in seal clearance. An analytical solution for both hydrostatic and hydrodynamic effects is presented that covers the whole range from zero to full angular misalignment. The net radial force on the primary seal ring is always directed so as to produce a radial eccentricity which generates inward pumping. Although the radial force is usually very small, in some cases it may be one of the reasons for excessive leakage through both the primary and secondary seals of a radial face seal.

  1. Radial forces in a misaligned radial face seal

    NASA Technical Reports Server (NTRS)

    Etsion, I.

    1978-01-01

    Radial forces on the primary seal ring of a flat misaligned seal are analyzed, taking into account the radial variation in seal clearance. An analytical solution for both hydrostatic and hydrodynamic effects is presented that covers the whole range from zero to full angular misalignment. The net radial force on the primary seal ring is always directed so as to produce a radial eccentricity which generates inward pumping. Although the radial force is usually very small, in some cases it may be one of the reasons for excessive leakage through both the primary and secondary seals of a radial face seal.

  2. Nozzle seal

    DOEpatents

    Herman, Richard Frederick

    1977-10-25

    In an illustrative embodiment of the invention, a nuclear reactor pressure vessel, having an internal hoop from which the heated coolant emerges from the reactor core and passes through to the reactor outlet nozzles, is provided with sealing members operatively disposed between the outlet nozzle and the hoop. The sealing members are biased against the pressure vessel and the hoop and are connected by a leak restraining member establishing a leak-proof condition between the inlet and outlet coolants in the region about the outlet nozzle. Furthermore, the flexible responsiveness of the seal assures that the seal will not structurally couple the hoop to the pressure vessel.

  3. Some metallographic results for brush bristles and brush segments of a shroud ring brush seal tested in a T-700 engine

    NASA Technical Reports Server (NTRS)

    Hendricks, Robert C.; Griffin, Thomas A.; Bobula, George A.; Bill, Robert C.; Hull, David R.; Csavina, Kristine R.

    1994-01-01

    Post-test investigation of a T-700 engine brush seal found regions void of bristles ('yanked out'), regions of bent-over bristles near the inlet, some 'snapped' bristles near the fence, and a more uniform smeared bristle interface between the first and last axial rows of bristles. Several bristles and four brush segments were cut from the brush seal, wax mounted, polished, and analyzed. Metallographic analysis of the bristle near the rub tip showed tungsten-rich phases uniformly distributed throughout the bristle, no apparent change within 1 mu m of the interface, and possibly a small amount of titanium, which would represent a transfer from the rotor. Analysis of the bristle wear face showed nonuniform tungsten, which is indicative of material resolidification. The cut end contained oxides and internal fractures; the worn end was covered with oxide scale. Material losses due to wear and elastoplastic deformation within the shear zone and third-body lubrication effects in the contact zone are discussed.

  4. Actively controlled shaft seals for aerospace applications

    NASA Technical Reports Server (NTRS)

    Salant, Richard F.

    1991-01-01

    The main objective is to determine the feasibility of utilizing controllable mechanical seals for aerospace applications. A potential application was selected as a demonstration case: the buffer gas seal in a LOX (liquid oxygen) turbopump. Currently, floating ring seals are used in this application. Their replacement with controllable mechanical seals would result in substantially reduced leakage rates. This would reduce the required amount of stored buffer gas, and therefore increase the vehicle payload. For such an application, a suitable controllable mechanical seal was designed and analyzed.

  5. Bioaccumulation of PCBs and chlorinated pesticides in seals, fishes and invertebrates from the White Sea, Russia.

    PubMed

    Muir, Derek; Savinova, Tatiana; Savinov, Vladimir; Alexeeva, Ludmila; Potelov, Vladimir; Svetochev, Vladislav

    2003-05-01

    Persistent organochlorines (OC) contaminants, including polychlorinated biphenyl (PCB) congeners, Dichlorophenyltrichloroethane (DDT)- and chlordane (CHL) related compounds, hexachlorocyclohexanes (HCH) isomers and chlorobenzenes (CBz) were determined in blubber of harp seals (Phoca groenlandica), ringed seals (Phoca hispida) and bearded seals (Eringnathus barbatus) as well as in fishes and invertebrates from the White Sea, in northwest Russia. Highest summation operator PCB and summation operator DDT concentrations were found in samples from two male bearded seals (means of 4150 ng/g lw and 3950 ng/g lw, respectively). Female harp seals had mean summation operator PCB and summation operator DDT concentrations of 1070+/-504 ng/g lw and 619+/-328 ng/g lw, respectively. Male and female adult ringed seals had similar mean summation operator PCB concentrations as harp seals (955+/-385 ng/g lw and 999+/-304 ng/g lw, respectively). summation operator CHL concentrations ranged from 63+/-29 ng/g lw in blubber of female adult ringed seals, to 322+/-156 ng/g lw in adult harp seals and averaged 465 ng/g lw in bearded seals. HCH isomers, mirex and chlorobenzenes were detected in all seal samples but were present at lower levels than summation operator CHL, summation operator DDT and summation operator PCB. Concentrations of summation operator CHL, summation operator DDT and summation operator PCB in ringed seals from the White Sea were within the range reported for the Barents Sea but lower than in ringed seals from the Kara Sea. Temporal trends were investigated by comparing concentrations of OCs in blubber of harp seal pups collected in 1992 with pups of the same age collected in 1998. The declines over the 6 year period ranged from approximately 33% for summation operator DDT to 60% for summation operator PCB. These declines are consistent with reports of declining concentrations summation operator DDT in seawater from the White Sea and inflowing rivers in the 1980's and

  6. High-pressure cryogenic seals for pressure vessels

    NASA Technical Reports Server (NTRS)

    Buggele, A. E.

    1977-01-01

    This investigation of the problems associated with reliably containing gaseous helium pressurized to 1530 bars (22 500 psi) between 4.2 K and 150 K led to the following conclusions: (1) common seal designs used in existing elevated-temperature pressure vessels are unsuitable for high-pressure cryogenic operation, (2) extrusion seal-ring materials such as Teflon, tin, and lead are not good seal materials for cryogenic high-pressure operation; and (3) several high-pressure cryogenic seal systems suitable for large-pressure vessel applications were developed; two seals required prepressurization, and one seal functioned repeatedly without any prepressurization. These designs used indium seal rings, brass or 304 stainless-steel anvil rings, and two O-rings of silicone rubber or Kel-F.

  7. Small High-Speed Self-Acting Shaft Seals for Liquid Rocket Engines

    NASA Technical Reports Server (NTRS)

    Burcham, R. E.; Boynton, J. L.

    1977-01-01

    Design analysis, fabrication, and experimental evaluation were performed on three self-acting facetype LOX seal designs and one circumferential-type helium deal design. The LOX seals featured Rayleigh step lift pad and spiral groove geometry for lift augmentation. Machined metal bellows and piston ring secondary seal designs were tested. The helium purge seal featured floating rings with Rayleigh step lift pads. The Rayleigh step pad piston ring and the spiral groove LOX seals were successfully tested for approximately 10 hours in liquid oxygen. The helium seal was successfully tested for 24 hours. The shrouded Rayleigh step hydrodynamic lift pad LOX seal is feasible for advanced, small, high-speed oxygen turbopumps.

  8. Shaft seal assembly for high speed and high pressure applications

    NASA Technical Reports Server (NTRS)

    Hadt, W. F.; Ludwig, L. P. (Inventor)

    1979-01-01

    A seal assembly is provided for reducing the escape of fluids from between a housing and a shaft rotably mounted in the housing. The seal assembly comprises a pair of seal rings resiliently connected to each other and disposed in side-by-side relationship. In each seal ring, both the internal bore surface and the radial face which faces away from the other seal ring are provided with a plurality of equi-spaced recesses. The seal faces referred to are located adjacent a seating surface of the housing. Under normal operating conditions, the seal assembly is stationary with respect to the housing, and the recesses generate life, keep the assembly spaced from the rotating shaft and allow slip therebetween. The seal assembly can seize on the shaft, and slip will then occur between the radial faces and the housing.

  9. Ferrules seals

    DOEpatents

    Smith, James L.

    1984-01-01

    A device is provided for sealing an inner tube and an outer tube without excessively deforming the tubes. The device includes two ferrules which cooperate to form a vacuum-tight seal between the inner tube and outer tube and having mating surfaces such that overtightening is not possible.

  10. Ferrules seals

    DOEpatents

    Smith, J.L.

    1984-07-10

    A device is provided for sealing an inner tube and an outer tube without excessively deforming the tubes. The device includes two ferrules which cooperate to form a vacuum-tight seal between the inner tube and outer tube and having mating surfaces such that overtightening is not possible. 3 figs.

  11. An Internal Coaxil Cable Seal System

    DOEpatents

    Hall, David R.; Hall, Jr., H. Tracy; Pixton, David; Dahlgren, Scott; Sneddon, Cameron; Briscoe, Michael; Fox, Joe

    2004-12-23

    The invention is a seal system for a coaxial cable more specifically an internal seal system placed within the coaxial cable and its constituent components. A series of seal stacks including flexible rigid rings and elastomeric rings are placed on load bearing members within the coaxial cable. The current invention is adapted to seal the annular space between the coaxial cable and an electrical contact passing there through. The coaxial cable is disposed within drilling components to transmit electrical signals between drilling components within a drill string. During oil and gas exploration, a drill string can see a range of pressures and temperatures thus resulting in multiple combinations of temperature and pressure and increasing the difficulty of creating a robust seal for all combinations. The seal system can be used in a plurality of downhole components, such as sections of pipe in a drill string, drill collars, heavy weight drill pipe, and jars.

  12. End-tidal sevoflurane concentration for ProSeal(TM) versus Classic(TM) laryngeal mask airway insertion in unpremedicated anaesthetised adult females.

    PubMed

    Ghai, B; Jain, K; Bansal, D; Bhatia, N

    2016-03-01

    The optimal end-tidal sevoflurane concentration for successful ProSealTM (Teleflex, Morrisville, NC, USA) laryngeal mask airway (PLMA) versus ClassicTM (Teleflex, Morrisville, NC, USA) laryngeal mask airway (CLMA) insertion in unpremedicated anaesthetised adults is unknown. We determined end-tidal sevoflurane concentrations for successful insertion in fifty percent of anaesthetised adults. This randomised, prospective, double-blind study was conducted in the operating theatre of a government tertiary care hospital. Forty-four unpremedicated American Society of Anesthesiologists physical status I and II women with cervical carcinoma (aged 30 to 60 years), scheduled for intracavity caesium implantation under general anaesthesia with a laryngeal mask airway (LMA) were included in the study. The participants were randomised to one of the two groups, to receive either a PLMA or CLMA. After anaesthetic induction with sevoflurane, a predetermined end-tidal sevoflurane concentration (starting at 2.5%) was sustained for 10 minutes before LMA insertion was attempted. End-tidal sevoflurane concentration was increased/decreased (step-size 0.25%) using Dixon and Massey's up-and-down method for the next patient based on the previous patient's response. Placement without clenching, movement, coughing or biting within one minute was considered successful insertion. The end-tidal sevoflurane concentration required for successful LMA insertion in fifty percent of anaesthetised adults was calculated as the mean of the crossover pairs' midpoints in each group and further confirmed by probit regression analysis. The end-tidal sevoflurane concentration (95% confidence interval) required for successful PLMA insertion in 50% of anaesthetised adults (3.15% [3.12% to 3.18%]) was significantly higher than that for CLMA insertion (2.71% [2.66% to 2.76%], P<0.001). These findings suggest that deeper anaesthesia is required for placement of a PLMA in comparison to a CLMA. PMID:27029654

  13. Metal sealing performance of subsea X-tree wellhead connector sealer

    NASA Astrophysics Data System (ADS)

    Zhao, Honglin; Chen, Rui; Luo, Xiaolan; Duan, Menglan; Lu, Yinghui; Fu, Guowei; Tian, Hongping; Ye, Daohui

    2015-05-01

    The metal sealing performance of subsea X-tree wellhead connectors is crucial for the safety and reliability of subsea X-trees. In order to establish the theoretical relation between metal sealing ring's contact stress and its structural parameters and working pressure, a mechanical analysis method for double-cone sealing of high pressure vessels is applied in analyzing the metal sealing ring under the condition of preload and operation. As a result, the formula of the unit sealing load for the metal sealing ring under operation with residual preload is shown in this paper, which ensures that the metal sealing ring has an excellent sealing effect and can prevent the metal sealing ring from yielding. Besides, while analyzing the sealing process of the metal sealing ring, the change rule of contact stress and working pressure is concluded here, putting forward that the structural parameters of the metal sealing ring are the major factors affecting the change rule. Finally, the analytical solution through theoretical analysis is compared with the simulation result through finite element analysis in a force feedback experiment, and both are consistent with each other, which fully verifies for the design and calculation theory on metal sealing ring's contact stress and its structural parameters and working pressure deduced in this paper. The proposed research will be treated as an applicable theory guiding the design of metal seal for subsea X-tree wellhead connectors.

  14. Stabilizing geometry for hydrodynamic rotary seals

    SciTech Connect

    Dietle, Lannie L.; Schroeder, John E.

    2010-08-10

    A hydrodynamic sealing assembly including a first component having first and second walls and a peripheral wall defining a seal groove, a second component having a rotatable surface relative to said first component, and a hydrodynamic seal comprising a seal body of generally ring-shaped configuration having a circumference. The seal body includes hydrodynamic and static sealing lips each having a cross-sectional area that substantially vary in time with each other about the circumference. In an uninstalled condition, the seal body has a length defined between first and second seal body ends which varies in time with the hydrodynamic sealing lip cross-sectional area. The first and second ends generally face the first and second walls, respectively. In the uninstalled condition, the first end is angulated relative to the first wall and the second end is angulated relative to the second wall. The seal body has a twist-limiting surface adjacent the static sealing lip. In the uninstalled condition, the twist-limiting surface is angulated relative to the peripheral wall and varies along the circumference. A seal body discontinuity and a first component discontinuity mate to prevent rotation of the seal body relative to the first component.

  15. Seal for fluid forming tools

    DOEpatents

    Golovashchenko, Sergey Fedorovich; Bonnen, John Joseph Francis

    2012-03-20

    An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

  16. Advanced helium purge seals for Liquid Oxygen (LOX) turbopumps

    NASA Technical Reports Server (NTRS)

    Shapiro, Wilbur; Lee, Chester C.

    1989-01-01

    Program objectives were to determine three advanced configurations of helium buffer seals capable of providing improved performance in a space shuttle main engine (SSME), high-pressure liquid oxygen (LOX) turbopump environment, and to provide NASA with the analytical tools to determine performance of a variety of seal configurations. The three seal designs included solid-ring fluid-film seals often referred to as floating ring seals, back-to-back fluid-film face seals, and a circumferential sectored seal that incorporated inherent clearance adjustment capabilities. Of the three seals designed, the sectored seal is favored because the self-adjusting clearance features accommodate the variations in clearance that will occur because of thermal and centrifugal distortions without compromising performance. Moreover, leakage can be contained well below the maximum target values; minimizing leakage is important on the SSME since helium is provided by an external tank. A reduction in tank size translates to an increase in payload that can be carried on board the shuttle. The computer codes supplied under this program included a code for analyzing a variety of gas-lubricated, floating ring, and sector seals; a code for analyzing gas-lubricated face seals; a code for optimizing and analyzing gas-lubricated spiral-groove face seals; and a code for determining fluid-film face seal response to runner excitations in as many as five degrees of freedom. These codes proved invaluable for optimizing designs and estimating final performance of the seals described.

  17. Reinforcement core facilitates O-ring installation

    NASA Technical Reports Server (NTRS)

    1965-01-01

    Reinforcement core holds O-ring in place within a structure while adjacent parts are being assembled. The core in the O-ring adds circumferential rigidity to the O-ring material. This inner core does not appreciably affect the sectional elasticity or gland-sealing characteristics of the O-ring.

  18. The sun, moon, wind, and biological imperative-shaping contrasting wintertime migration and foraging strategies of adult male and female northern fur seals (Callorhinus ursinus).

    PubMed

    Sterling, Jeremy T; Springer, Alan M; Iverson, Sara J; Johnson, Shawn P; Pelland, Noel A; Johnson, Devin S; Lea, Mary-Anne; Bond, Nicholas A

    2014-01-01

    Adult male and female northern fur seals (Callorhinus ursinus) are sexually segregated in different regions of the North Pacific Ocean and Bering Sea during their winter migration. Explanations for this involve interplay between physiology, predator-prey dynamics, and ecosystem characteristics, however possible mechanisms lack empirical support. To investigate factors influencing the winter ecology of both sexes, we deployed five satellite-linked conductivity, temperature, and depth data loggers on adult males, and six satellite-linked depth data loggers and four satellite transmitters on adult females from St. Paul Island (Bering Sea, Alaska, USA) in October 2009. Males and females migrated to different regions of the North Pacific Ocean: males wintered in the Bering Sea and northern North Pacific Ocean, while females migrated to the Gulf of Alaska and California Current. Horizontal and vertical movement behaviors of both sexes were influenced by wind speed, season, light (sun and moon), and the ecosystem they occupied, although the expression of the behaviors differed between sexes. Male dive depths were aligned with the depth of the mixed layer during daylight periods and we suspect this was the case for females upon their arrival to the California Current. We suggest that females, because of their smaller size and physiological limitations, must avoid severe winters typical of the northern North Pacific Ocean and Bering Sea and migrate long distances to areas of more benign environmental conditions and where prey is shallower and more accessible. In contrast, males can better tolerate often extreme winter ocean conditions and exploit prey at depth because of their greater size and physiological capabilities. We believe these contrasting winter behaviors 1) are a consequence of evolutionary selection for large size in males, important to the acquisition and defense of territories against rivals during the breeding season, and 2) ease environmental

  19. The Sun, Moon, Wind, and Biological Imperative–Shaping Contrasting Wintertime Migration and Foraging Strategies of Adult Male and Female Northern Fur Seals (Callorhinus ursinus)

    PubMed Central

    Sterling, Jeremy T; Springer, Alan M.; Iverson, Sara J.; Johnson, Shawn P.; Pelland, Noel A.; Johnson, Devin S.; Lea, Mary-Anne; Bond, Nicholas A.

    2014-01-01

    Adult male and female northern fur seals (Callorhinus ursinus) are sexually segregated in different regions of the North Pacific Ocean and Bering Sea during their winter migration. Explanations for this involve interplay between physiology, predator-prey dynamics, and ecosystem characteristics, however possible mechanisms lack empirical support. To investigate factors influencing the winter ecology of both sexes, we deployed five satellite-linked conductivity, temperature, and depth data loggers on adult males, and six satellite-linked depth data loggers and four satellite transmitters on adult females from St. Paul Island (Bering Sea, Alaska, USA) in October 2009. Males and females migrated to different regions of the North Pacific Ocean: males wintered in the Bering Sea and northern North Pacific Ocean, while females migrated to the Gulf of Alaska and California Current. Horizontal and vertical movement behaviors of both sexes were influenced by wind speed, season, light (sun and moon), and the ecosystem they occupied, although the expression of the behaviors differed between sexes. Male dive depths were aligned with the depth of the mixed layer during daylight periods and we suspect this was the case for females upon their arrival to the California Current. We suggest that females, because of their smaller size and physiological limitations, must avoid severe winters typical of the northern North Pacific Ocean and Bering Sea and migrate long distances to areas of more benign environmental conditions and where prey is shallower and more accessible. In contrast, males can better tolerate often extreme winter ocean conditions and exploit prey at depth because of their greater size and physiological capabilities. We believe these contrasting winter behaviors 1) are a consequence of evolutionary selection for large size in males, important to the acquisition and defense of territories against rivals during the breeding season, and 2) ease environmental

  20. Viscoelastic analysis of seals for extended service life

    NASA Technical Reports Server (NTRS)

    Bower, Mark V.

    1993-01-01

    The space station is being developed for a service life of up to thirty years. As a consequence, the design requirements for the seals to be used are unprecedented. Full scale testing to assure the selected seals can satisfy the design requirements are not feasible. As an alternative, a sub-scale test program (2) has been developed by MSFC to calibrate the analysis tools to be used to certify the proposed design. This research has been conducted in support of the MSFC Integrated Seal Test Program. The ultimate objective of this research is to correlate analysis and test results to qualify the analytical tools which in turn, are to be used to qualify the flight hardware. Seals are simple devices, in wide spread use. The most common type of seal is the O-ring. O-ring seals are typically rings of rubber with a circular cross section. The rings are placed between the surfaces to be sealed, usually in a groove of some design. The particular design may differ based on a number of different factors. This research is focused on O-rings that are staticly compressed by perpendicular clamping forces, commonly referred to as face seals. In this type of seal the O-ring is clamped between the sealing surfaces by loads perpendicular to the circular cross section.

  1. Viscoelastic analysis of seals for extended service life

    NASA Astrophysics Data System (ADS)

    Bower, Mark V.

    1993-11-01

    The space station is being developed for a service life of up to thirty years. As a consequence, the design requirements for the seals to be used are unprecedented. Full scale testing to assure the selected seals can satisfy the design requirements are not feasible. As an alternative, a sub-scale test program (2) has been developed by MSFC to calibrate the analysis tools to be used to certify the proposed design. This research has been conducted in support of the MSFC Integrated Seal Test Program. The ultimate objective of this research is to correlate analysis and test results to qualify the analytical tools which in turn, are to be used to qualify the flight hardware. Seals are simple devices, in wide spread use. The most common type of seal is the O-ring. O-ring seals are typically rings of rubber with a circular cross section. The rings are placed between the surfaces to be sealed, usually in a groove of some design. The particular design may differ based on a number of different factors. This research is focused on O-rings that are staticly compressed by perpendicular clamping forces, commonly referred to as face seals. In this type of seal the O-ring is clamped between the sealing surfaces by loads perpendicular to the circular cross section.

  2. Seal Technology for Liquid Oxygen (LOX) Turbopumps

    NASA Technical Reports Server (NTRS)

    Shapiro, Wilbur; Hamm, Robert

    1985-01-01

    Two types of advanced seals for liquid oxygen (LOX) turbopumps were investigated. One was a spiral-groove face seal whose function is to seal high-pressure LOX at the impeller end of the turbopump. The other was a floating-ring, Rayleigh-step, helium buffered seal used to prevent LOX ingress to the turbine side of the unit. For each seal type, two sizes were investigated (50 and 20 mm). A turbine-driven test rig was designed and manufactured, and a test program was completed on the 50 mm floating-ring, Rayleigh-step, helium buffered seal. Significant results were: vaporization in the flow path could cause failure by overheating; therefore, the spiral-groove pumping portion of the seal that provides the fluid film must circulate fluid without disruption if vaporization occurs in the sealing dam. This is successfully accomplished by a pressure-balanced spiral-groove concept that is described. The spiral-groove configuration is affected by turbulence in the fluid film and pressure drops due to fluid inertia at sudden contractions. The net results of these effects are deep grooves, large operating films, and high power loss when compared against seals operating with laminar films. Turbulence and inertia are induced by the high-density and low-viscosity characteristics of LOX. The program clearly pointed out the need to consider system environmental factors such as thermal and centrifugal distortions and rotor vibrations in the seal design.

  3. A Sample Return Container with Hermetic Seal

    NASA Technical Reports Server (NTRS)

    Kong, Kin Yuen; Rafeek, Shaheed; Sadick, Shazad; Porter, Christopher C.

    2000-01-01

    A sample return container is being developed by Honeybee Robotics to receive samples from a derivative of the Champollion/ST4 Sample Acquisition and Transfer Mechanism or other samplers and then hermetically seal samples for a sample return mission. The container is enclosed in a phase change material (PCM) chamber to prevent phase change during return and re-entry to earth. This container is designed to operate passively with no motors and actuators. Using the sampler's featured drill tip for interfacing, transfer-ring and sealing samples, the container consumes no electrical power and therefore minimizes sample temperature change. The circular container houses a few isolated canisters, which will be sealed individually for samples acquired from different sites or depths. The drill based sampler indexes each canister to the sample transfer position, below the index interface for sample transfer. After sample transfer is completed, the sampler indexes a seal carrier, which lines up seals with the openings of the canisters. The sampler moves to the sealing interface and seals the sample canisters one by one. The sealing interface can be designed to work with C-seals, knife edge seals and cup seals. Again, the sampler provides all sealing actuation. This sample return container and co-engineered sample acquisition system are being developed by Honeybee Robotics in collaboration with the JPL Exploration Technology program.

  4. Collar nut and thrust ring

    DOEpatents

    Lowery, Guy B.

    1991-01-01

    A collar nut comprises a hollow cylinder having fine interior threads at one end for threadably engaging a pump mechanical seal assembly and an inwardly depending flange at the other end. The flange has an enlarged portion with a groove for receiving an O-ring for sealing against the intrusion of pumpage from the exterior. The enlarged portion engages a thrust ring about the pump shaft for crushing a hard O-ring, such as a graphite O-ring. The hard O-ring seals the interior of the mechanical seal assembly and pump housing against the loss of lubricants or leakage of pumpage. The fine threads of the hollow cylinder provide the mechanical advantage for crushing the hard O-ring evenly and easily with a hand tool from the side of the collar nut rather than by tightening a plurality of bolts from the end and streamlines the exterior surface of the mechanical seal. The collar nut avoids the spatial requirements of bolt heads at the end of a seal and associated bolt head turbulence.

  5. Heartworm (Acanthocheilonema spirocauda) and seal louse (Echinophthirius horridus) infections in harbour seals (Phoca vitulina) from the North and Baltic Seas

    NASA Astrophysics Data System (ADS)

    Lehnert, Kristina; Schwanke, Eva; Hahn, Kerstin; Wohlsein, Peter; Siebert, Ursula

    2016-07-01

    The seal louse (Echinophthirius [E.] horridus) and the heartworm (Acanthocheilonema [A.] spirocauda) are parasites of harbour seal (Phoca vitulina). Little is known about the role of the seal louse as a potential vector and its role for the development and transmission of heartworm larvae to their final host, the harbour seal. The life-cycle of the heartworm is still not fully understood. For the presented study, findings of 1191 stranded harbour seals collected along the North- and Baltic Sea coast between 1996 and 2013 were examined. 4.4% (n = 53) of these harbour seals were infected with adult heartworms and 3.4% (n = 40) harbour seals carried seal lice. The highest prevalence and level of infection with adult heartworms (A. spirocauda) (9.3%) and seal lice (E. horridus) (8.9%) were found on yearling harbour seals (7-18 months) compared to neonate and adult seals. Investigating seal lice (n = 35) for larval heartworm stages one larvae was encountered in an ethanol-fixated seal louse. During a health monitoring survey of live harbour seals, 109 animals were captured and examined during spring and autumn between 2008 and 2014. Blood samples were taken and microfilariae were discovered in blood smears in 41% (n = 45) of the examined harbour seals. Yearling seals (n = 21) showed higher prevalence (86%) and level of infection with microfilariae than adults. Microfilariae were identified as A. spirocauda by sequencing the species-specific COI gene in 24 blood samples. The high prevalence of microfilariae of A. spirocauda in blood samples (41%) is in contrast to the low prevalence of mature infections/adult specimens in stranded seals (4.4%) investigated. Although rare parasites of seals, the recent increase in prevalence of heartworm and seal lice in stranded seals and the relatively high occurrence of microfilaria in the free-ranging population underscore the importance of further studies investigating the immunology of infections and their transmission pathways, as

  6. A survey of actuator shaft sealing techniques for extended space missions

    NASA Technical Reports Server (NTRS)

    Hotz, G. M.

    1972-01-01

    Actuators for control and articulation aboard Mariner spacecraft have employed output shaft seals to maintain an internal gaseous atmosphere. On future missions, considerably greater expected lifetimes, temperature ranges, and radiation exposures have led to a need to determine the limitations of the present O-ring output shaft seal and to examine other candidate seals. Seals suited both to dynamic and static sealing were examined for potential use in three specific actuator applications and the following candidate seals were selected: (a) O-ring seal, (b) chevron seal, (c) bellows seal (linear actuator only), (d) magnetic fluid seal (rotary actuators only) and as a backup seal to any of the foregoing, (e) the labyrinth seal.

  7. Hermetic Glass-To-Metal Seal For Instrumentation Window

    NASA Technical Reports Server (NTRS)

    Hill, Arthur J.

    1992-01-01

    Proposed mounting scheme for optical element of instrumentation window in pressure vessel ensures truly hermetic seal while minimizing transmission of stress to optical element. Brazed metal seal superior to conventional gaskets of elastomer, carbon, asbestos, or other material compressed between optical element and wall of vessel. Concentric brazed joints in proposed seal bond metal ring to wall of vessel and to optical element. U-shaped cross section allows ring to flex under pressure.

  8. Anaerobic sealing

    SciTech Connect

    Hayre, J.

    1986-05-01

    Anaerobic sealants offer an alternative to conventional methods of joint repair on mains operating at low and medium pressures. The method does not require highly skilled personnel who are diligent in ensuring that the necessary standards of preparation and seal application are achieved. British Gas' experience has shown that lead joints that do not contain yarn or where the yarn has deteriorated are difficult to seal. The evidence so far indicates that yarn is important in ensuring that the low viscosity sealant rapidly wicks around the joint during the injection operation. It is obvious that more research and development is needed in this field, but anaerobic sealing of leaking joints in an effective, innovative method of joint repair.

  9. EHD analysis of and experiments on pumping Leningrader seals

    NASA Technical Reports Server (NTRS)

    Eusepi, M. W.; Walowit, J. A.

    1986-01-01

    Analysis and design charts have been generated to provide design data for Pumping Leningrader Reciprocating Rod Seals. The analytical treatment divides the seal into three regions: an inlet zone, induced with the use of an expansion ring, a contact zone, and an exit zone. Complete solutions have been obtained by matching elasticity equations with hydrodynamic theory. Experiments, although of a limited nature, did demonstrate the ability of the seal design analysis to provide viable seals.

  10. Mainshaft seals for small gas turbine engines

    NASA Technical Reports Server (NTRS)

    Ludwig, L. P.; Lynwander, P.

    1974-01-01

    An experimental evaluation of mainshaft seals for small gas turbine engines was conducted with shaft speeds to 213 m/sec, air pressures to 215 psia, and air temperatures to 412 K. A radial face seal incorporating self-acting geometry for lift augmentation was evaluated. In addition, three conventional carbon seal types (face, circumferential segmented, and rotating ring) were run for comparison. Test results indicated that the conventional seals used in this evaluation may not be satisfactory in future advanced engines because of excessive air leakage. On the other hand, the self-acting face seal was shown to have the potential capability of limiting leakages to one-half that of the conventional face seals and one-fifth that of conventional ring seals. A 150 hour endurance test of the self-action face seal was conducted at speeds to 145 m/sec, air pressures to 180 psia, and air temperatures to 408 K. The seal wear was not measurable.

  11. Heme orientational disorder in human adult hemoglobin reconstituted with a ring fluorinated heme and its functional consequences

    SciTech Connect

    Nagao, Satoshi; Hirai, Yueki; Kawano, Shin; Imai, Kiyohiro; Suzuki, Akihiro; Yamamoto, Yasuhiko . E-mail: yamamoto@chem.tsukuba.ac.jp

    2007-03-16

    A ring fluorinated heme, 13,17-bis(2-carboxylatoethyl)-3,8-diethyl-2-fluoro-7,12, 18-trimethyl-porphyrin-atoiron(III), has been incorporated into human adult hemoglobin (Hb A). The heme orientational disorder in the individual subunits of the protein has been readily characterized using {sup 19}F NMR and the O{sub 2} binding properties of the protein have been evaluated through the oxygen equilibrium analysis. The equilibrated orientations of hemes in {alpha}- and {beta}- subunits of the reconstituted protein were found to be almost completely opposite to each other, and hence were largely different from those of the native and the previously reported reconstituted proteins [T. Jue, G.N. La Mar, Heme orientational heterogeneity in deuterohemin-reconstituted horse and human hemoglobin characterized by proton nuclear magnetic resonance spectroscopy, Biochem. Biophys. Res. Commun. 119 (1984) 640-645]. Despite the large difference in the degree of the heme orientational disorder in the subunits of the proteins, the O{sub 2} affinity and the cooperativity of the protein reconstituted with 2-MF were similar to those of the proteins reconstituted with a series of hemes chemically modified at the heme 3- and 8-positions [K. Kawabe, K. Imaizumi, Z. Yoshida, K. Imai, I. Tyuma, Studies on reconstituted myoglobins and hemoglobins II. Role of the heme side chains in the oxygenation of hemoglobin, J. Biochem. 92 (1982) 1713-1722], whose O{sub 2} affinity and cooperativity were higher and lower, respectively, relative to those of native protein. These results indicated that the heme orientational disorder could exert little effect, if any, on the O{sub 2} affinity properties of Hb A. This finding provides new insights into structure-function relationship of Hb A.

  12. Study on a new type of sealing - regeneration-labyrinth sealing for displacer in cryocoolers: Part I - Theoretical study

    NASA Astrophysics Data System (ADS)

    Liu, L. Q.; Zhang, L.

    2000-02-01

    A new concept of sealing structure - regeneration-labyrinth sealing has been put forward to substitute for sealing rings that influence seriously the performance of cryocoolers. A program, which can simulate the thermophysical process occurring in the sealing structure, is developed consequently. Using numerical simulation, the reasonable structure of the regeneration-labyrinth sealing has been determined. The influences of some parameters, such as the heat transfer coefficient of forced convection, the cylinder-displacer gap, the diameter and length of cylinder on the losses of cooling capacity have been studied numerically. As a result, the designing principle of the new type of sealing is obtained.

  13. Self-Sealing Cryogenic Fitting

    NASA Technical Reports Server (NTRS)

    Jia, Lin Xiang; Chow, Wen Lung; Moslemian, Davood; Lin, Gary; Melton, Greg

    1994-01-01

    Self-sealing fitting for cryogenic tubes remains free of leakage from room temperature to liquid-helium temperature even at internal pressure as high as 2.7 MPa. Fitting comprises parts made of materials with different coefficients of thermal expansion to prevent leakage gaps from forming as temperature decreases. Consists of coupling nut, two flared tube ends, and flared O-ring spacer. Spacer contracts more than tube ends do as temperature decreases. This greater contraction seals tube ends more tightly, preventing leakage.

  14. Planetary Rings

    NASA Astrophysics Data System (ADS)

    Esposito, Larry

    2014-03-01

    Preface: a personal view of planetary rings; 1. Introduction: the allure of the ringed planets; 2. Studies of planetary rings 1610-2013; 3. Diversity of planetary rings; 4. Individual ring particles and their collisions; 5. Large-scale ring evolution; 6. Moons confine and sculpt rings; 7. Explaining ring phenomena; 8. N-body simulations; 9. Stochastic models; 10. Age and evolution of rings; 11. Saturn's mysterious F ring; 12. Uranus' rings and moons; 13. Neptune's partial rings; 14. Jupiter's ring-moon system after Galileo and New Horizons; 15. Ring photometry; 16. Dusty rings; 17. Concluding remarks; Afterword; Glossary; References; Index.

  15. Softened-Stainless-Steel O-Rings

    NASA Technical Reports Server (NTRS)

    Marquis, G. A.; Waters, William I.

    1993-01-01

    In fabrication of O-ring of new type, tube of 304 stainless steel bent around mandril into circle and welded closed into ring. Ring annealed in furnace to make it soft and highly ductile. In this condition, used as crushable, deformable O-ring seal. O-ring replacements used in variety of atmospheres and temperatures, relatively inexpensive, fabricated with minimum amount of work, amenable to one-of-a-kind production, reusable, and environmentally benign.

  16. Hermetically sealed electrical feedthrough for high temperature secondary cells

    DOEpatents

    Knoedler, R.; Nelson, P.A.; Shimotake, H.; Battles, J.E.

    1983-07-26

    A passthrough seal is disclosed for electrically isolating the terminal in a lithium/metal sulfide cell from the structural cell housing. The seal has spaced upper and lower insulator rings fitted snuggly between the terminal and an annularly disposed upstanding wall, and outwardly of a powdered insulator also confined between the upstanding wall and terminal. The adjacent surfaces of the upper insulator ring and the respective upstanding wall and terminal are conically tapered, diverging in the axial direction away from the cell interior, and a sealing ring is located between each pair of the adjacent surfaces. The components are sized so that upon appropriate movement of the upper insulator ring toward the lower insulator ring the powdered insulator and sealing rings are each compressed to a high degree. This compacts the powdered insulator thereby rendering the same highly impervious and moreover fuses the sealing rings to and between the adjacent surfaces. The upper and lower insulator rings might be formed of beryllium oxide and/or alumina, the powdered insulator might be formed of boron nitride, and the sealing rings might be formed of aluminum.

  17. Hermetically sealed electrical feedthrough for high temperature secondary cells

    DOEpatents

    Knoedler, Reinhard; Nelson, Paul A.; Shimotake, Hiroshi; Battles, James E.

    1985-01-01

    A passthrough seal is disclosed for electrically isolating the terminal in a lithium/metal sulfide cell from the structural cell housing. The seal has spaced upper and lower insulator rings fitted snuggly between the terminal and an annularly disposed upstanding wall, and outwardly of a powdered insulator also confined between the upstanding wall and terminal. The adjacent surfaces of the upper insulator ring and the respective upstanding wall and terminal are conically tapered, diverging in the axial direction away from the cell interior, and a sealing ring is located between each pair of the adjacent surfaces. The components are sized so that upon appropriate movement of the upper insulator ring toward the lower insulator ring the powdered insulator and sealing rings are each compressed to a high degree. This compacts the powdered insulator thereby rendering the same highly impervious and moreover fuses the sealing rings to and between the adjacent surfaces. The upper and lower insulator rings might be formed of beryllium oxide and/or alumina, the powdered insulator might be formed of boron nitride, and the sealing rings might be formed of aluminum.

  18. Development of Advanced Seals for Industrial Turbine Applications

    NASA Astrophysics Data System (ADS)

    Chupp, Raymond E.; Aksit, Mahmut F.; Ghasripoor, Farshad; Turnquist, Norman A.; Dinc, Saim; Mortzheim, Jason; Demiroglu, Mehmet

    2002-10-01

    A critical area being addressed to improve industrial turbine performance is reducing the parasitic leakage flows through the various static and dynamic seals. Implementation of advanced seals into General Electric (GE) industrial turbines has progressed well over the last few years with significant operating performance gains achieved. Advanced static seals have been placed in gas turbine hot gas-path junctions and steam turbine packing ring segment end gaps. Brush seals have significantly decreased labyrinth seal leakages in gas turbine compressors and turbine interstages, steam turbine interstage and end packings, industrial compressor shaft seals, and generator seals. Abradable seals are being developed for blade-tip locations in various turbine locations. This presentation summarizes the status of advanced seal development for industrial turbines at GE.

  19. Python fiber optic seal

    SciTech Connect

    Ystesund, K.; Bartberger, J.; Brusseau, C.; Fleming, P.; Insch, K.; Tolk, K.

    1993-08-01

    Sandia National Laboratories has developed a high security fiber optic seal that incorporates tamper resistance features that are not available in commercial fiber optic seals. The Python Seal is a passive fiber optic loop seal designed to give indication of unauthorized entry. The seal includes a fingerprint feature that provides seal identity information in addition to the unique fiber optic pattern created when the seal is installed. The fiber optic cable used for the seal loop is produced with tamper resistant features that increase the difficulty of attacking that component of a seal. A Seal Reader has been developed that will record the seal signature and the fingerprint feature of the seal. A Correlator software program then compares seal images to establish a match or mismatch. SNL is also developing a Polaroid reader to permit hard copies of the seal patterns to be obtained directly from the seal.

  20. MWTF jumper connector integral seal block development and leak testing

    SciTech Connect

    Ruff, E.S.; Jordan, S.R.

    1995-01-01

    In fiscal year 1993, tests of an o-ring/tetraseal retainer designed to replace a gasket-type seal used in PUREX-type process jumper connectors encouraged the design of an improved seal block. This new seal block combines several parts into one unitized component called an integral seal block. This report summarizes development and leak testing of the new integral seal block. The integral seal block uses a standard o-ring nested in a groove to accomplish leak tightness. This seal block eliminates the need to machine acme threads into the lower skirt casting and seal retainers, eliminates tolerance stack-up, reduces parts inventory, and eliminates an unnecessary leak path in the jumper connector assembly. This report also includes test data on various types of o-ring materials subjected to heat and pressure. Materials tested included Viton, Kalrez, and fluorosilicone, with some incidental data on teflon coated silicone o-rings. Test experience clearly demonstrates the need to test each seal material for temperature and pressure in its intended application. Some materials advertised as being {open_quotes}better{close_quotes} at higher temperatures did not perform up to expectations. Inspection of the fluorosilicone and Kalrez seals after thermal testing indicates that they are much more susceptible to heat softening than Viton.

  1. Face-seal lubrication: 1: Proposed and published models

    NASA Technical Reports Server (NTRS)

    Ludwig, L. P.

    1976-01-01

    The numerous published theories on the mechanism of hydrodynamic lubrication of face seals were reviewed. These theories employ either an inclined-slider-bearing macrogeometry or an inclined-slider-bearing microgeometry to produce hydrodynamic pressure that separates the surfaces of the primary seal. Secondary seal friction and primary ring inertia effects are not considered. Hypothetical seal operating models were devised to include secondary seal friction and primary ring inertia effects. It was hypothesized that these effects induce relative angular misalinement of the primary seal faces and that this misalinement is, in effect, an inclined slider macrogeometry. Stable running was postulated for some of these hypothetical operating models. In others, periodic loss of hydrodynamic lubrication was postulated to be possible with certain combinations of waviness and angular misalinement. Application of restrictions that apply to seal operation led to a hydrodynamic governing equation for the new model that is a two-dimensional, time-dependent Reynolds equation with the short-bearing approximation.

  2. A bulk flow model of a brush seal system

    NASA Technical Reports Server (NTRS)

    Hendricks, R. C.; Schlumberger, S.; Braun, M. J.; Choy, F.; Mullen, R. L.

    1991-01-01

    Fibers can be readily fabricated into a variety of seal configurations that are compliant and responsive to high speed or lightly loaded systems. A linear, circular, or contoured brush seal system is a contact seal consisting of the bristle pattern and hardened interface. When compared to a labyrinth seal, the brush seal system is superior and features low leakage, dynamic stability, and permits compliant structures. But in turn, the system usually requires a hardened smooth interface and permits only limited pressure drops. Wear life and wear debris for operations with static or dynamic excitation are largely undetermined. A seal system involves control of fluid within specific boundaries. The brush and rub ring (or rub surface) form a seal system. Design similitudes, a bulk flow model, and rub ring (interface) coatings are discussed. The bulk flow model calculations are based on flows in porous media and filters. The coatings work is based on experience and expanded to include current practice.

  3. GAS SEAL

    DOEpatents

    Monson, H.; Hutter, E.

    1961-07-11

    A seal is described for a cover closing an opening in the top of a pressure vessel that may house a nuclear reactor. The seal comprises a U-shaped trough formed on the pressure vessel around the opening therein, a mass of metal in the trough, and an edge flange on the cover extending loosely into the trough and dipping into the metal mass. The lower portion of the metal mass is kept melted, and the upper portion, solid. The solid pontion of the metal mass prevents pressure surges in the vessel from expelling the liquid portion of the metal mass from the trough; the liquld portion, thus held in place by the solid portion, does not allow gas to go through, and so gas cannot escape through shrinkage holes in the solid portion.

  4. Earth boring bit with pressure compensating rigid face seal

    SciTech Connect

    Burr, B. H.

    1985-05-14

    An earth boring bit having a cantilevered bearing shaft and a compensator system to equalize the pressure of the lubricant with the hydrostatic pressure of the drilling fluid surrounding the bit. A rigid face seal assembly, positioned between the cutter and bearing shaft of the bit, moves axially in response to, and to compensate for, dynamic pressure changes in the lubricant adjacent the seal. This is accomplished by the positioning and sizing of resilient energizer rings in relationship to the geometries of the mating grooves between the cutter and shaft and the rigid sealing rings of the face seal assembly.

  5. Soft Wire Seals For High Temperatures And Pressures

    NASA Technical Reports Server (NTRS)

    Tsou, Peter

    1996-01-01

    Soft metal wires used to make O-ring and similar seals for vessels, flanges, and fittings subject to pressures equal to or greater than 1,000 psi and temperatures equal to or greater than 100 degrees C. Seals containing soft metal wires made inexpensively because fabricated to looser tolerances like those of lower-temperature, lower-pressure elastomeric-O-ring seals, which they resemble. Seals also made with noncircular grooves and with soft metals other than aluminum. For example, gold performs well, though expensive. For other applications, silver good choice.

  6. Planetary Rings

    NASA Astrophysics Data System (ADS)

    Esposito, Larry W.

    2011-07-01

    Preface; 1. Introduction: the allure of ringed planets; 2. Studies of planetary rings 1610-2004; 3. Diversity of planetary rings; 4. Individual ring particles and their collisions; 5. Large-scale ring evolution; 6. Moons confine and sculpt rings; 7. Explaining ring phenomena; 8. N-Body simulations; 9. Stochastic models; 10. Age and evolution of rings; 11. Saturn's mysterious F ring; 12. Neptune's partial rings; 13. Jupiter's ring-moon system after Galileo; 14. Ring photometry; 15. Dusty rings; 16. Cassini observations; 17. Summary: the big questions; Glossary; References; Index.

  7. Combustion heated cold sealed TEC

    SciTech Connect

    Yarygin, V.I.; Klepikov, V.V.; Meleta, Y.A.; Mikheyev, A.S.; Yarygin, D.V.; Wolff, L.R.

    1997-12-31

    The development of a thermionic domestic boiler system using natural gas, which as performed under an ECS-project in 1992 to 1994 by a Russian-Dutch team of researchers, will be continued again. Thanks to financial support on the part of the Netherlands Organization for Scientific Research (NWO), the major effort in 1997 to 1999 will be focused on the development, manufacture and testing of an improved, easier to fabricate, more repairable and less expensive combustion heated TEC with a longer life-time. The achievement of the aim of this project will make it possible to expand the field of the terrestrial thermionics application and to embark on the commercialization stage. This report discusses the concept of the combustion heated Cold Seal TEC. A Cold Seal TEC will be developed and tested, in which the rubber O-ring seal will electrically insulate the hot shell from the collector heat pipe. The Cold Seal TEC will use a noble gas + cesium as the working medium (the idea of such a TEC was first proposed in 1973 by Professor Musa from Romania). In its cold state, the cesium will short circuit the emitter and the collector. During operation, the interelectrode space will be filled with cesium vapor. The upper part of a Cold Seal TEC will be filled with a noble gas. This noble gas will prevent the O-ring seal from being attacked by the cesium. The TEC output characteristics will be considerably improved by using electrode materials that were developed earlier in the course of an ECS-project for the development of low temperature TEC electrodes.

  8. Fluid pressure balanced seal

    NASA Technical Reports Server (NTRS)

    Marsh, H. W. (Inventor)

    1966-01-01

    A seal which increases in effectiveness with increasing pressure is presented. The seal's functional capability throughout both static and dynamic operation makes it particularly useful for sealing ball valve ports. Other features of the seal include the ability to seal two opposed surfaces simultaneously, tolerance of small misalignments, tolerance of wide temperature ranges, ability to maintain positive sealing contact under conditions of internal or external pressurization, and ability to conform to slight irregularities in seal or surface contours.

  9. Experimental stiffness of tapered bore seals

    NASA Technical Reports Server (NTRS)

    Fleming, D. P.

    1985-01-01

    The stiffness of tapered-bore ring seals was measured with air as the sealed fluid. Static stiffness agreed fairly well with results of a previous analysis. Cross-coupled stiffness due to shaft rotation was much less than predicted. It is suggested that part of the disparity may be due to simplifying assumptions in the analysis; however, these do not appear to account for the entire difference observed.

  10. Oil seal effects and subsynchronous vibrations in high-speed compressors

    NASA Technical Reports Server (NTRS)

    Allaire, P. E.; Kocur, J. A., Jr.

    1985-01-01

    Oil seals are commonly used in high speed multistage compressors. If the oil seal ring becomes locked up against the fixed portion of the seal, high oil film crosscoupled stiffnesses can result. A method of analysis for determining if the oil seals are locked up or not is discussed. The method is then applied to an oil seal in a compressor with subsynchronous vibration problems.

  11. Regenerator seal design

    DOEpatents

    Eckart, Francis H.

    1982-01-01

    A rotary regenerator disc matrix has a face seal with a cross arm and arcuate rim segments joined by prestress clamps to prestrain the arcuate rim seals so as to compensate seal rim twisting or coning and resultant disc face seal leakage as produced by operating thermal gradients across the seal.

  12. Sealing Mechanical Cryogenic Coolers

    NASA Technical Reports Server (NTRS)

    Richter, R.

    1985-01-01

    Metal bellows used to seal Vuilleumier and Stirling-cycle cryogenic coolers, replacing sliding seals that failed after only 3,000 hours of service. Metal bellows, incorporated in displacer design provide nonrubbing dynamic seal. Lifetime of cryogenic cooler no longer limited by loss of sealing material and by deterioration of regenerators due to clogging by seal debris.

  13. Areas of Seal R/D at GE

    NASA Technical Reports Server (NTRS)

    Pope, A. Nelson

    1991-01-01

    About four years ago, work was completed on a 36 inch diameter gas to gas carbon ring seal used to buffer low pressure turbine air at the rim of the forward outer flowpath on the GE36 unducted fan (UDF) engine. At about the same time, we were developing a long life counter-rotating intershaft air-oil seal of approximately 7.6 inch diameter for operation at 800 fps, 800 F, and 50 psid. Although we were successful in meeting most program goals with a split ring seal of the axial bushing type, the seal with the greatest payoff in life and air leakage rates, bearing many features in common with the GE36 seal, could not be successfully tested because of the structural weakness of the primary seal ring carbon material. This was a split ring seal using a hybrid combination of orifice compensated hydrostatic and shrouded hydrodynamic gas bearings. We are presently working to develop this design in conjunction with high strength materials being developed by Pure Carbon Co. In the area of engine secondary gas flow path-sealing for performance improvement, we are currently working with carbon and all metal face seals. A 15 inch diameter all metal 'aspirating' face seal, using self-acting hydrostatic bearings, was successfully tested to 700 fps, 100 psid, and 1000 F, demonstrating long life at flow reduction of 86 percent compared to a 'best' labyrinth. This seal will be developed through 1400 F, 900 fps, and 350 psid. The seal 'aspirates' closed at about idle speed pressure during engine start and reopens at engine shutdown. A hydraulic thrust balance seal, currently using orifice compensated hydrostatics, is under development. Other aspects of these projects are briefly covered.

  14. Regenerator seal

    NASA Technical Reports Server (NTRS)

    Davis, Leonard C. (Inventor); Pacala, Theodore (Inventor); Sippel, George R. (Inventor)

    1981-01-01

    A method for manufacturing a hot side regenerator cross arm seal assembly having a thermally stablilized wear coating with a substantially flat wear surface thereon to seal between low pressure and high pressure passages to and from the hot inboard side of a rotary regenerator matrix includes the steps of forming a flat cross arm substrate member of high nickel alloy steel; fixedly securing the side edges of the substrate member to a holding fixture with a concave surface thereacross to maintain the substrate member to a slightly bent configuration on the fixture surface between the opposite ends of the substrate member to produce prestress therein; applying coating layers on the substrate member including a wear coating of plasma sprayed nickel oxide/calcium flouride material to define a wear surface of slightly concave form across the restrained substrate member between the free ends thereon; and thereafter subjecting the substrate member and the coating thereon to a heat treatment of 1600.degree. F. for sixteen hours to produce heat stabilizing growth in the coating layers on the substrate member and to produce a thermally induced growth stress in the wear surface that substantially equalizes the prestress in the substrate whereby when the cross arm is removed from the fixture surface following the heat treatment step a wear face is formed on the cross arm assembly that will be substantially flat between the ends.

  15. Randomized Controlled Trial of the ShangRing for Adult Medical Male Circumcision: Safety, Effectiveness, and Acceptability of Using 7 Versus 14 Device Sizes

    PubMed Central

    Zulu, Robert; Linyama, David; Long, Sarah; Nonde, Thikazi Jere; Lai, Jaim Jou; Kashitala, Joshua; Veena, Valentine; Kasonde, Prisca

    2016-01-01

    Objectives: To assess the safety, effectiveness, and acceptability of providing a reduced number of ShangRing sizes for adult voluntary medical male circumcision (VMMC) within routine service delivery in Lusaka, Zambia. Methods: We conducted a randomized controlled trial and enrolled 500 HIV-negative men aged 18–49 years at 3 clinics. Participants were randomized to 1 of 2 study arms (Standard Sizing arm vs Modified Sizing arm) in a 1:1 ratio. All 14 adult ShangRing sizes (40–26 mm inner diameter, each varying by 1 mm) were available in the Standard Sizing arm; the Modified Sizing arm used every other size (40, 38, 36, 34, 32, 30, 28 mm inner diameter). Each participant was scheduled for 2 follow-up visits: the removal visit (day 7 after placement) and the healing check visit (day 42 after placement), when they were evaluated for adverse events (AEs), pain, and healing. Results: Four hundred and ninety-six men comprised the analysis population, with 255 in the Standard Sizing arm and 241 in the Modified Sizing arm. Three men experienced a moderate or severe AEs (0.6%), including 2 in the Standard Sizing arm (0.8%) and 1 in the Modified Sizing arm (0.4%). 73.2% of participants were completely healed at the scheduled day 42 healing check visit, with similar percentages across study arms. Virtually all (99.6%) men, regardless of study arm, stated that they were very satisfied or satisfied with the appearance of their circumcised penis, and 98.6% stated that they would recommend ShangRing circumcision to family/friends. Conclusions: The moderate/severe AE rate was low and similar in the 2 study arms, suggesting that provision of one-half the number of adult device sizes is sufficient for safe service delivery. Effectiveness, time to healing, and acceptability were similar in the study arms. The simplicity of the ShangRing technique, and its relative speed, could facilitate VMMC program goals. In addition, sufficiency of fewer device sizes would simplify logistics

  16. Fundamentals of fluid sealing

    NASA Technical Reports Server (NTRS)

    Zuk, J.

    1976-01-01

    The fundamentals of fluid sealing, including seal operating regimes, are discussed and the general fluid-flow equations for fluid sealing are developed. Seal performance parameters such as leakage and power loss are presented. Included in the discussion are the effects of geometry, surface deformations, rotation, and both laminar and turbulent flows. The concept of pressure balancing is presented, as are differences between liquid and gas sealing. Mechanisms of seal surface separation, fundamental friction and wear concepts applicable to seals, seal materials, and pressure-velocity (PV) criteria are discussed.

  17. Performance of a shaft seal system for the LE-7 rocket engine oxidizer turbopump

    NASA Astrophysics Data System (ADS)

    Oike, Mamoru; Nosaka, Masataka; Kikuchi, Masataka; Watanabe, Yoshiaki

    An experimental study on a rotating-shaft seal system for a high-pressure liquid oxygen (LOX) turbopump has been conducted to develop the LE-7 engine for the Japanese H-II launch vehicle. The LOX turbopump rotating-shaft seal system, which prevents LOX (4.9 MPa) and the high-pressure turbine-drive gas (16.6 MPa, 970 K) from mixing during high-speed operations (18,000 to 20,000 rpm), consists of the following seals: an LOX seal comprising a floating-ring and a wear-ring, a turbine gas seal comprising two floating-rings, and a helium purge seal comprising two segmented circumferential seal-rings. This report describes experimental and observational results concerning the rotating-shaft seal system obtained in the LOX turbopump operations and the seal tests. Based on comparisons between the measurements and the analytical results, sealing characteristics of the seal system are discussed. Inspections of the sealing surfaces after the engine firing tests demonstrated that the LOX turbopump rotating-shaft seal system has sufficient durability for use in the LE-7 engine for the H-II launch vehicle.

  18. Feasibility Assessment of Thermal Barrier Seals for Extreme Transient Temperatures

    NASA Technical Reports Server (NTRS)

    Steinetz, Bruce M.; Dunlap, Patrick H., Jr.

    1998-01-01

    The assembly joints of modem solid rocket motor cases are generally sealed using conventional O-ring type seals. The 5500+ F combustion gases produced by rocket motors are kept a safe distance away from the seals by thick layers of phenolic insulation. Special compounds are used to fill insulation gaps leading up to the seals to prevent a direct flowpath to them. Design criteria require that the seals should not experience torching or charring during operation, or their sealing ability would be compromised. On limited occasions, NASA has observed charring of the primary O-rings of the Space Shuttle solid rocket nozzle assembly joints due to parasitic leakage paths opening up in the gap-fill compounds during rocket operation. NASA is investigating different approaches for preventing torching or charring of the primary O-rings. One approach is to implement a braided rope seal upstream of the primary O-ring to serve as a thermal barrier that prevents the hot gases from impinging on the O-ring seals. This paper presents flow, resiliency, and thermal resistance for several types of NASA rope seals braided out of carbon fibers. Burn tests were performed to determine the time to burn through each of the seals when exposed to the flame of an oxyacetylene torch (5500 F), representative of the 5500 F solid rocket motor combustion temperatures. Rope seals braided out of carbon fibers endured the flame for over six minutes, three times longer than solid rocket motor burn time. Room and high temperature flow tests are presented for the carbon seals for different amounts of linear compression. Room temperature compression tests were performed to assess seal resiliency and unit preloads as a function of compression. The thermal barrier seal was tested in a subscale "char" motor test in which the seal sealed an intentional defect in the gap insulation. Temperature measurements indicated that the seal blocked 2500 F combustion gases on the upstream side with very little temperature

  19. Tool For Installation Of Seal In Tube Fitting

    NASA Technical Reports Server (NTRS)

    Trevathan, Joseph R.

    1993-01-01

    Plierslike tool helps secure repair seal in fitting. Tool crimps repair seal into tube fitting, ensuring tight fit every time. Modified pair of snapring pliers to which knife-edge jaws have been added. Spring added between handles. Also includes separate, accompanying support ring.

  20. Large seals fabricated from small segments reduce procurement lead time

    NASA Technical Reports Server (NTRS)

    Daniels, C. M.; Hanes, V. D.

    1966-01-01

    Large diameter seals are fabricated from narrow strip stock welded in segments to form a complete ring. This technique could be used to reduce the cost of critical, large diameter seals in the heating and ventilating industry, petrochemical industry, and marine fabrication industry.

  1. A novel tool to mitigate by-catch mortality of baltic seals in coastal fyke net fishery.

    PubMed

    Oksanen, Sari M; Ahola, Markus P; Oikarinen, Jyrki; Kunnasranta, Mervi

    2015-01-01

    Developing methods to reduce the incidental catch of non-target species is important, as by-catch mortality poses threats especially to large aquatic predators. We examined the effectiveness of a novel device, a "seal sock", in mitigating the by-catch mortality of seals in coastal fyke net fisheries in the Baltic Sea. The seal sock developed and tested in this study was a cylindrical net attached to the fyke net, allowing the seals access to the surface to breathe while trapped inside fishing gear. The number of dead and live seals caught in fyke nets without a seal sock (years 2008-2010) and with a sock (years 2011-2013) was recorded. The seals caught in fyke nets were mainly juveniles. Of ringed seals (Phoca hispida botnica) both sexes were equally represented, while of grey seals (Halichoerus grypus) the ratio was biased (71%) towards males. All the by-caught seals were dead in the fyke nets without a seal sock, whereas 70% of ringed seals and 11% of grey seals survived when the seal sock was used. The seal sock proved to be effective in reducing the by-catch mortality of ringed seals, but did not perform as well with grey seals. PMID:25993534

  2. A Novel Tool to Mitigate By-Catch Mortality of Baltic Seals in Coastal Fyke Net Fishery

    PubMed Central

    Oksanen, Sari M.; Ahola, Markus P.; Oikarinen, Jyrki; Kunnasranta, Mervi

    2015-01-01

    Developing methods to reduce the incidental catch of non-target species is important, as by-catch mortality poses threats especially to large aquatic predators. We examined the effectiveness of a novel device, a “seal sock”, in mitigating the by-catch mortality of seals in coastal fyke net fisheries in the Baltic Sea. The seal sock developed and tested in this study was a cylindrical net attached to the fyke net, allowing the seals access to the surface to breathe while trapped inside fishing gear. The number of dead and live seals caught in fyke nets without a seal sock (years 2008–2010) and with a sock (years 2011–2013) was recorded. The seals caught in fyke nets were mainly juveniles. Of ringed seals (Phoca hispida botnica) both sexes were equally represented, while of grey seals (Halichoerus grypus) the ratio was biased (71%) towards males. All the by-caught seals were dead in the fyke nets without a seal sock, whereas 70% of ringed seals and 11% of grey seals survived when the seal sock was used. The seal sock proved to be effective in reducing the by-catch mortality of ringed seals, but did not perform as well with grey seals. PMID:25993534

  3. Seroprevalence of Antibodies against Seal Influenza A(H10N7) Virus in Harbor Seals and Gray Seals from the Netherlands.

    PubMed

    Bodewes, Rogier; Rubio García, Ana; Brasseur, Sophie M; Sanchez Conteras, Guillermo J; van de Bildt, Marco W G; Koopmans, Marion P G; Osterhaus, Albert D M E; Kuiken, Thijs

    2015-01-01

    In the spring and summer 2014, an outbreak of seal influenza A(H10N7) virus infection occurred among harbor seals (Phoca vitulina) off the coasts of Sweden and Denmark. This virus subsequently spread to harbor seals off the coasts of Germany and the Netherlands. While thousands of seals were reported dead in Sweden, Denmark and Germany, only a limited number of seals were found dead in the Netherlands. To determine the extent of exposure of seals in the Netherlands to influenza A/H10N7 virus, we measured specific antibody titers in serum samples from live-captured seals and seals admitted for rehabilitation in the Netherlands by use of a hemagglutination inhibition assay and an ELISA. In harbor seals in 2015, antibodies against seal influenza A(H10N7) virus were detected in 41% (32 out of 78) pups, 10% (5 out of 52) weaners, and 58% (7 out of 12) subadults or adults. In gray seals (Halichoerus grypus) in 2015, specific antibodies were not found in the pups (n = 26), but in 26% (5 out of 19) of the older animals. These findings indicate that, despite apparent low mortality, infection with seal influenza A(H10N7) virus was geographically widespread and also occurred in grey seals. PMID:26658347

  4. Seroprevalence of Antibodies against Seal Influenza A(H10N7) Virus in Harbor Seals and Gray Seals from the Netherlands

    PubMed Central

    Sanchez Conteras, Guillermo J.; van de Bildt, Marco W. G.; Koopmans, Marion P. G.; Osterhaus, Albert D. M. E.; Kuiken, Thijs

    2015-01-01

    In the spring and summer 2014, an outbreak of seal influenza A(H10N7) virus infection occurred among harbor seals (Phoca vitulina) off the coasts of Sweden and Denmark. This virus subsequently spread to harbor seals off the coasts of Germany and the Netherlands. While thousands of seals were reported dead in Sweden, Denmark and Germany, only a limited number of seals were found dead in the Netherlands. To determine the extent of exposure of seals in the Netherlands to influenza A/H10N7 virus, we measured specific antibody titers in serum samples from live-captured seals and seals admitted for rehabilitation in the Netherlands by use of a hemagglutination inhibition assay and an ELISA. In harbor seals in 2015, antibodies against seal influenza A(H10N7) virus were detected in 41% (32 out of 78) pups, 10% (5 out of 52) weaners, and 58% (7 out of 12) subadults or adults. In gray seals (Halichoerus grypus) in 2015, specific antibodies were not found in the pups (n = 26), but in 26% (5 out of 19) of the older animals. These findings indicate that, despite apparent low mortality, infection with seal influenza A(H10N7) virus was geographically widespread and also occurred in grey seals. PMID:26658347

  5. Hot piston ring tests

    NASA Technical Reports Server (NTRS)

    Allen, David J.; Tomazic, William A.

    1987-01-01

    As part of the DOE/NASA Automotive Stirling Engine Project, tests were made at NASA Lewis Research Center to determine whether appendix gap losses could be reduced and Stirling engine performance increased by installing an additional piston ring near the top of each piston dome. An MTI-designed upgraded Mod I Automotive Stirling Engine was used. Unlike the conventional rings at the bottom of the piston, these hot rings operated in a high temperature environment (700 C). They were made of a high temperature alloy (Stellite 6B) and a high temperature solid lubricant coating (NASA Lewis-developed PS-200) was applied to the cylinder walls. Engine tests were run at 5, 10, and 15 MPa operating pressure over a range of operating speeds. Tests were run both with hot rings and without to provide a baseline for comparison. Minimum data to assess the potential of both the hot rings and high temperature low friction coating was obtained. Results indicated a slight increase in power and efficiency, an increase over and above the friction loss introduced by the hot rings. Seal leakage measurements showed a significant reduction. Wear on both rings and coating was low.

  6. Dampers for Stationary Labyrinth Seals

    NASA Technical Reports Server (NTRS)

    El-Aini, Yehia; Mitchell, William; Roberts, Lawrence; Montgomery, Stuart; Davis, Gary

    2011-01-01

    Vibration dampers have been invented that are incorporated as components within the stationary labyrinth seal assembly. These dampers are intended to supplement other vibration-suppressing features of labyrinth seals in order to reduce the incidence of high-cycle-fatigue failures, which have been known to occur in the severe vibratory environments of jet engines and turbopumps in which labyrinth seals are typically used. A vibration damper of this type includes several leaf springs and/or a number of metallic particles (shot) all held in an annular seal cavity by a retaining ring. The leaf springs are made of a spring steel alloy chosen, in conjunction with design parameters, to maintain sufficient preload to ensure effectiveness of damping at desired operating temperatures. The cavity is vented via a small radial gap between the retaining ring and seal housing. The damping mechanism is complex. In the case of leaf springs, the mechanism is mainly friction in the slippage between the seal housing and individual dampers. In the case of a damper that contains shot, the damping mechanism includes contributions from friction between individual particles, friction between particles and cavity walls, and dissipation of kinetic energy of impact. The basic concept of particle/shot vibration dampers has been published previously; what is new here is the use of such dampers to suppress traveling-wave vibrations in labyrinth seals. Damping effectiveness depends on many parameters, including, but not limited to, coefficient of friction, mode shape, and frequency and amplitude of vibrational modes. In tests, preloads of the order of 6 to 15 lb (2.72 to 6.8 kilograms) per spring damper were demonstrated to provide adequate damping levels. Effectiveness of shot damping of vibrations having amplitudes from 20 to 200 times normal terrestrial gravitational acceleration (196 to 1,960 meters per square second) and frequencies up to 12 kHz was demonstrated for shot sizes from 0.032 to

  7. Piston sealing arrangement for a cryogenic refrigerator

    SciTech Connect

    Green, G.F.; Humphrey, J.C.

    1984-02-21

    A sealing arrangement for a rectilinear reciprocable piston within a cryogenic refrigerator comprising a buffer defined by dual O-rings disposed around the circumference of the piston and containing pressurized gas of the same type as the refrigeration gas. The buffer limits or prevents both the entrance of contaminants and also the escape of the refrigeration gas.

  8. Turbine disc sealing assembly

    DOEpatents

    Diakunchak, Ihor S.

    2013-03-05

    A disc seal assembly for use in a turbine engine. The disc seal assembly includes a plurality of outwardly extending sealing flange members that define a plurality of fluid pockets. The sealing flange members define a labyrinth flow path therebetween to limit leakage between a hot gas path and a disc cavity in the turbine engine.

  9. Indium sealing techniques.

    NASA Technical Reports Server (NTRS)

    Hochuli, U.; Haldemann, P.

    1972-01-01

    Gold films are used as an alloying flux to form 5-micron-thick indium film seals at temperatures below 300 C. Pyrex was sealed to quartz, ULE, CER-VIT, Irtran 2, Ge, GaAs, Invar, Kovar, Al, and Cu. The seals can also be used as current feedthroughs and graded seals.

  10. Sealing packer

    SciTech Connect

    Clifton, T.G.; Brookey, R.L.

    1987-02-03

    A sealing packer is described for a well casing characterized by: a tubular inner sleeve with a passage therethrough; an upper outer sleeve assembly mounted about the inner sleeve and including: a resiliently deformable upper packing element; seat means for seating the upper packing element; hold down means for engaging a well casing and retaining the outer sleeve assembly stationary against upwardly directed well pressures; a lower outer sleeve assembly slidably mounted about the inner sleeve and including: a resiliently deformable lower packing element; first seat means for seating the lower packing element; abutment means for compressing the upper packing element between the abutment means and the seat of the upper outer sleeve assembly; the upper packing element constructed such that when compressed it engages the well casing, setting means for fixing a second seat means of the lower outer sleeve assembly relative to the well casing: the lower packing element being deformable between the first and second seat means of the lower outer sleeve assembly to engage the well casing; and piston means normally adjacent the abutment means and separable therefrom, the piston means responsive to fluid pressure in the passage and in the well casing between the lower and upper packing elements when the packing elements deformably engage the well casing to separate from the abutment means and further deform the upper packing element.

  11. Seal design alternatives study

    SciTech Connect

    Van Sambeek, L.L.

    1993-06-01

    This report presents the results from a study of various sealing alternatives for the WIPP sealing system. Overall, the sealing system has the purpose of reducing to the extent possible the potential for fluids (either gas or liquid) from entering or leaving the repository. The sealing system is divided into three subsystems: drift and panel seals within the repository horizon, shaft seals in each of the four shafts, and borehole seals. Alternatives to the baseline configuration for the WIPP seal system design included evaluating different geometries and schedules for seal component installations and the use of different materials for seal components. Order-of-magnitude costs for the various alternatives were prepared as part of the study. Firm recommendations are not presented, but the advantages and disadvantages of the alternatives are discussed. Technical information deficiencies are identified and studies are outlined which can provide required information.

  12. Turbine blade platform seal

    DOEpatents

    Zagar, Thomas W.; Schiavo, Anthony L.

    2001-01-01

    A rotating blade group 90 for a turbo-machine having an improved device for sealing the gap 110 between the edges 112,114 of adjacent blade platforms 96,104. The gap 110 between adjacent blades 92,100 is sealed by a seal pin 20 its central portion 110 and by a seal plate 58,60 at each of the front 54 and rear 56 portions. The seal plates 58,60 are inserted into corresponding grooves 62,64 formed in the adjacent edges 112,114 of adjoining blades 92,100 and held in place by end plates 40,42. The end of the seal plates 58,60 may be chamfered 78,80 to improve the seal against the end plate 40,42. The seal pin 20 provides the required damping between the blades 92,100 and the seal plates 58,60 provide improved sealing effectiveness.

  13. Face-seal lubrication. 2: Theory of response to angular misalignement

    NASA Technical Reports Server (NTRS)

    Ludwig, L. P.; Allen, G. P.

    1976-01-01

    A theoretical analysis was made of a hypothetical seal operating mode. The hypothetical seal model provides for three degrees of primary ring motion and includes the force and moments induced by primary ring response to seat angular misalignment. This ring response causes a relative angular misalignment between the faces of the primary seal. Hydrodynamic pressure generation is produced by this misalignment. The analysis is based on the Reynolds equation in short bearing form and on a balance of forces and moments that arise from hydrodynamic and secondary seal friction effects. A closed form solution was obtained that can be solved for film thickness and relative angular misalignment.

  14. Computer program documentation for the dynamic analysis of a noncontacting mechanical face seal

    NASA Technical Reports Server (NTRS)

    Auer, B. M.; Etsion, I.

    1980-01-01

    A computer program is presented which achieves a numerical solution for the equations of motion of a noncontacting mechanical face seal. The flexibly-mounted primary seal ring motion is expressed by a set of second order differential equations for three degrees of freedom. These equations are reduced to a set of first order equations and the GEAR software package is used to solve the set of first order equations. Program input includes seal design parameters and seal operating conditions. Output from the program includes velocities and displacements of the seal ring about the axis of an inertial reference system. One example problem is described.

  15. Advanced bristle seals for gas turbine engines. Final report, May-November 1992

    SciTech Connect

    Cabe, J.L.

    1993-01-28

    A seven month proof-of-concept program was conducted for an advanced bristle seal, called a bush seal, for use in gas turbine engines. This program was performed as a Small Business Innovation Research (SBIR) Phase I project. Bush seal specimen and a full ring bush seal were designed, evaluated, and manufactured for testing. An analytical study of the potential of the bush seal relative to a labyrinth seal was conducted. Static and dynamic testing of the bush seal was performed to determine the behavior of the bristles under pressurization and during contact with a rotating labyrinth tooth. Stable behavior of the bristle elements was observed during static pressurization of a full ring bush seal. The dynamic testing of various configurations of bush seal against a rotating labyrinth tooth showed minimal wear of the bristles relative to a conventional labyrinth seal. the development and application of the bush seal concept to gas turbine engines has the potential of improving the engine's performance while decreasing the degradation of the seal performance over time.... Seal, Bush seal, Labyrinth seal, Gas turbine.

  16. Rotatable seal assembly. [Patent application; rotating targets

    DOEpatents

    Logan, C.M.; Garibaldi, J.L.

    1980-11-12

    An assembly is provided for rotatably supporting a rotor on a stator so that vacuum chambers in the rotor and stator remain in communication while the chambers are sealed from ambient air, which enables the use of a ball bearing or the like to support most of the weight of the rotor. The apparatus includes a seal device mounted on the rotor to rotate therewith, but shiftable in position on the rotor while being sealed to the rotor as by an O-ring. The seal device has a flat face that is biased towards a flat face on the stator, and pressurized air is pumped between the faces to prevent contact between them while spacing them a small distance apart to avoid the inflow of large amounts of air between the faces and into the vacuum chambers.

  17. The modified Cobra Seal

    SciTech Connect

    Ystesund, K.J.; Drayer, D.D.

    1990-01-01

    The Cobra Seal was developed in response to the International Atomic Energy Agency's request for an in situ verifiable seal. The Type E metal cap seal, still widely used by the IAEA, must be removed and returned to Agency headquarters for verification. The Cobra Seal allows an inspector to verify seal identity and integrity on site, without removing the seal. The seal consists of a loop of multi-strand fiber optic cable, which can be routed around or through the object to be sealed, and a seal body that secures the ends of the fiber optic cable. A cutting blade in the seal body randomly cuts a portion of the optical fibers in the cable. After the seal assembly is completed, a reference image is recorded of the unique pattern of light spots produced when the seal face is illuminated. Subsequent photographs of the seal pattern are compared to the original to establish the seal identity and integrity. This paper reviews the improvements and the technology of the cobra seal system. 3 refs., 5 figs.

  18. Planetary rings

    SciTech Connect

    Greenberg, R.; Brahic, A.

    1984-01-01

    Among the topics discussed are the development history of planetary ring research, the view of planetary rings in astronomy and cosmology over the period 1600-1900, the characteristics of the ring systems of Saturn and Uranus, the ethereal rings of Jupiter and Saturn, dust-magnetosphere interactions, the effects of radiation forces on dust particles, the collisional interactions and physical nature of ring particles, transport effects due to particle erosion mechanisms, and collision-induced transport processes in planetary rings. Also discussed are planetary ring waves, ring particle dynamics in resonances, the dynamics of narrow rings, the origin and evolution of planetary rings, the solar nebula and planetary disk, future studies of the planetary rings by space probes, ground-based observatories and earth-orbiting satellites, and unsolved problems in planetary ring dynamics.

  19. Thermal Barrier/Seal for Extreme Temperature Applications

    NASA Technical Reports Server (NTRS)

    Steinetz, Bruce M.; Dunlap, Patrick H., Jr.; Phelps, Jack; Bauer, Paul; Bond, Bruce; McCool, Alex (Technical Monitor)

    2002-01-01

    Large solid rocket motors, as found on the Space Shuttle, are fabricated in segments for manufacturing considerations, bolted together, and sealed using conventional Viton O-ring seals. Similarly the nine large solid rocket motor nozzles are assembled from several different segments, bolted together, and sealed at six joint locations using conventional O-ring seals. The 5500 F combustion gases are generally kept a safe distance away from the seals by thick layers of phenolic or rubber insulation. Joint-fill compounds, including RTV (room temperature vulcanized compound) and polysulfide filler, are used to fill the joints in the insulation to prevent a direct flow-path to the O-rings. Normally these two stages of protection are enough to prevent a direct flow-path of the 900-psi hot gases from reaching the temperature-sensitive O-ring seals. However, in the current design 1 out of 15 Space Shuttle solid rocket motors experience hot gas effects on the Joint 6 wiper (sacrificial) O-rings. Also worrisome is the fact that joints have experienced heat effects on materials between the RTV and the O-rings, and in two cases O-rings have experienced heat effects. These conditions lead to extensive reviews of the post-flight conditions as part of the effort to monitor flight safety. We have developed a braided carbon fiber thermal barrier to replace the joint fill compounds in the Space Shuttle solid rocket motor nozzles to reduce the incoming 5500 F combustion gas temperature and permit only cool (approximately 100 F) gas to reach the temperature-sensitive O-ring seals. Implementation of this thermal barrier provides more robust, consistent operation with shorter turn around times between Shuttle launches.

  20. Corkscrew Seals: Grey Seal (Halichoerus grypus) Infanticide and Cannibalism May Indicate the Cause of Spiral Lacerations in Seals.

    PubMed

    Brownlow, Andrew; Onoufriou, Joseph; Bishop, Amanda; Davison, Nicholas; Thompson, Dave

    2016-01-01

    Large numbers of dead seals with characteristic spiral lesions have been washing ashore around the North Atlantic over the past two decades. Interactions with ship propellers and shark predation have been suggested as the likely causal mechanisms. However, new evidence points towards a more likely candidate: grey seal predation. An adult male grey seal was observed and recorded catching, killing and eating five weaned grey seal pups over a period of one week on the Isle of May, Scotland. A further 9 carcasses found in the same area exhibited similar injuries. Post mortem analysis of lesions indicated the wound characteristics were similar to each other and in 12 of the 14 carcasses analysed, were indistinguishable from carcasses previously attributed to propeller interaction. We therefore propose that most of the seal carcasses displaying spiral lacerations in the UK are caused by grey seal predation. Cases in other locations should be re-evaluated using the scoring system presented here to identify whether grey seal predation is a major cause of mortality in phocid seals. PMID:27254025

  1. Corkscrew Seals: Grey Seal (Halichoerus grypus) Infanticide and Cannibalism May Indicate the Cause of Spiral Lacerations in Seals

    PubMed Central

    2016-01-01

    Large numbers of dead seals with characteristic spiral lesions have been washing ashore around the North Atlantic over the past two decades. Interactions with ship propellers and shark predation have been suggested as the likely causal mechanisms. However, new evidence points towards a more likely candidate: grey seal predation. An adult male grey seal was observed and recorded catching, killing and eating five weaned grey seal pups over a period of one week on the Isle of May, Scotland. A further 9 carcasses found in the same area exhibited similar injuries. Post mortem analysis of lesions indicated the wound characteristics were similar to each other and in 12 of the 14 carcasses analysed, were indistinguishable from carcasses previously attributed to propeller interaction. We therefore propose that most of the seal carcasses displaying spiral lacerations in the UK are caused by grey seal predation. Cases in other locations should be re-evaluated using the scoring system presented here to identify whether grey seal predation is a major cause of mortality in phocid seals. PMID:27254025

  2. Design and analysis of seals for extended service life

    NASA Astrophysics Data System (ADS)

    Bower, Mark V.

    1992-12-01

    Space Station Freedom is being developed for a service life of up to thirty years. As a consequence, the design requirements for the seals to be used are unprecedented. Full scale testing to assure the selected seals can satisfy the design requirements are not feasible. As an alternative, a sub-scale test program has been developed by MSFC to calibrate the analysis tools to be used to certify the proposed design. This research has been conducted in support of the MSFC Integrated Seal Test Program. The ultimate objective of this research is to correlate analysis and test results to qualify the analytical tools, which in turn, are to be used to qualify the flight hardware. This research is totally focused on O-rings that are compressed by perpendicular clamping forces. In this type of seal the O-ring is clamped between the sealing surfaces by loads perpendicular to the circular cross section.

  3. Design and analysis of seals for extended service life

    NASA Technical Reports Server (NTRS)

    Bower, Mark V.

    1992-01-01

    Space Station Freedom is being developed for a service life of up to thirty years. As a consequence, the design requirements for the seals to be used are unprecedented. Full scale testing to assure the selected seals can satisfy the design requirements are not feasible. As an alternative, a sub-scale test program has been developed by MSFC to calibrate the analysis tools to be used to certify the proposed design. This research has been conducted in support of the MSFC Integrated Seal Test Program. The ultimate objective of this research is to correlate analysis and test results to qualify the analytical tools, which in turn, are to be used to qualify the flight hardware. This research is totally focused on O-rings that are compressed by perpendicular clamping forces. In this type of seal the O-ring is clamped between the sealing surfaces by loads perpendicular to the circular cross section.

  4. Nuclear reactor sealing system

    DOEpatents

    McEdwards, James A.

    1983-01-01

    A liquid metal-cooled nuclear reactor sealing system. The nuclear reactor includes a vessel sealed at its upper end by a closure head. The closure head comprises at least two components, one of which is rotatable; and the two components define an annulus therebetween. The sealing system includes at least a first and second inflatable seal disposed in series in an upper portion of the annulus. The system further includes a dip seal extending into a body of insulation located adjacent a bottom portion of the closure head. The dip seal comprises a trough formed by a lower portion of one of the components, and a seal blade pendently supported from the other component and extending downwardly into the trough. A body of liquid metal is contained in the trough which submerges a portion of the seal blade. The seal blade is provided with at least one aperture located above the body of liquid metal for providing fluid communication between the annulus intermediate the dip seal and the inflatable seals, and a body of cover gas located inside the vessel. There also is provided means for introducing a purge gas into the annulus intermediate the inflatable seals and the seal blade. The purge gas is introduced in an amount sufficient to substantially reduce diffusion of radioactive cover gas or sodium vapor up to the inflatable seals. The purge gas mixes with the cover gas in the reactor vessel where it can be withdrawn from the vessel for treatment and recycle to the vessel.

  5. Inboard seal mounting

    DOEpatents

    Hayes, John R.

    1983-01-01

    A regenerator assembly for a gas turbine engine has a hot side seal assembly formed in part by a cast metal engine block having a seal recess formed therein that is configured to supportingly receive ceramic support blocks including an inboard face thereon having a regenerator seal face bonded thereto. A pressurized leaf seal is interposed between the ceramic support block and the cast metal engine block to bias the seal wear face into sealing engagement with a hot side surface of a rotary regenerator matrix.

  6. Compliant Foil Seal Investigations

    NASA Technical Reports Server (NTRS)

    Proctor, Margaret; Delgado, Irebert

    2004-01-01

    Room temperature testing of an 8.5 inch diameter foil seal was conducted in the High Speed, High Temperature Turbine Seal Test Rig at the NASA Glenn Research Center. The seal was operated at speeds up to 30,000 rpm and pressure differentials up to 75 psid. Seal leakage and power loss data will be presented and compared to brush seal performance. The failure of the seal and rotor coating at 30,000 rpm and 15 psid will be presented and future development needs discussed.

  7. Thermal and elastohydrodynamic analysis of reciprocating rod seals in the Stirling engine

    NASA Technical Reports Server (NTRS)

    Yang, Y.; Hughes, W. F.

    1983-01-01

    Sliding seals and pumping rings for use in Stirling engines are analyzed from an elastohydrodynamic point of view. The oil film thickness and pressure distribution are found by a finite element method and then used to determine the operating temperature of sliding seals. Thermal aspects of dry seals (cap seals) are also discussed. A parametric study has been made and the results summarized in a set of curves.

  8. Steam turbine high pressure vent and seal system

    SciTech Connect

    Groenendaal, J.C. Jr.; Brown, B.

    1987-04-28

    A steam turbine is described comprising: an outer cylinder; an inner cylinder disposed within the outer cylinder; a blade ring disposed partially within the inner cylinder and partially within the outer cylinder; a nozzle chamber assembly disposed within the inner cylinder for introducing motive steam to the turbine and having nozzle chamber and nozzle block portions; a rotor having circular array of rotatable blades and a thrust balance piston disposed thereon; a dummy ring disposed within one end of the inner cylinder adjacent the balance piston; labyrinth sealing means disposed between the dummy ring and the balance piston forming a rotating seal.

  9. EHD analysis of and experiments on pumping leningrader seals

    SciTech Connect

    Eusepi, M.W.; Walowit, J.A.

    1986-06-01

    An analysis has been developed to predict the performance of pumping Leningrader reciprocating rod seals when the inlet (gas) side of the seal bore is formed by an expansion ring rather than by machining. The prediction of seal performance is based on the use of charts which provide necessary design parameters without the need for computerized calculations. A numerical example has been included to demonstrate the use of the design charts. Potential means for controlling and optimizing both performance and life capability is also provided. An experimental study was also conducted as part of the overall program in order to evaluate pumping Leningrader seals constructed in accordance with the analysis. Several seal materials, ranging in elastic modulus from 1.59 x 10/sup 3/ MPa for filled PTFE to 4.58 x 10/sup 3/ MPa for poly(amide-imide) were tested. For the limited number and durational tests conducted, the experiments showed that the ring expanded inlet type seal has the ability to provide desired levels of sealing. Additionally, it was shown that the lower modulus materials are more easily fabricated into seals and provide better sealing capability. 28 figs., 17 tabs.

  10. Saturn's rings

    NASA Technical Reports Server (NTRS)

    2000-01-01

    When seen from the unlit side, the rings of Saturn present a much different appearance from that familiar to telescopic observers. Relatively opaque areas like the B Ring turn black, while lightly populated zones, such as the C Ring and the Cassini Division, prove to excellent diffuse transmitters of sunlight. The A Ring, with intermediate opacity, is at an intermediate level of brightness.

  11. Seals, seal trainers, and mycobacterial infection.

    PubMed

    Thompson, P J; Cousins, D V; Gow, B L; Collins, D M; Williamson, B H; Dagnia, H T

    1993-01-01

    In 1986, three seals died in a marine park in Western Australia; culture of postmortem tissue suggested infection with Mycobacterium bovis. In 1988, a seal trainer who had been employed at the Western Australian marine park until 1985 developed pulmonary tuberculosis caused by M. bovis while working in a zoo 3,000 km away on the east coast of Australia. Culture characteristics, biochemical behavior, sodium dodecyl sulphate polyacrylamide gel electrophoresis, and restriction endonuclease analysis suggested that the strains of M. bovis infecting the seals and trainer were identical but unique and differed from reference strains and local cattle strains of M. bovis. The infection in both the seals and the trainer had a destructive but indolent course. This is the first time that M. bovis has been observed in seals and the first time that tuberculous infection has been documented to be transmitted from seals to humans. Further investigation of the extent of tuberculous infection in seal populations elsewhere in the world seems warranted, and those working with seals and other marine animals should be monitored for infection. PMID:8420412

  12. Magnetically Actuated Seal

    NASA Technical Reports Server (NTRS)

    Pinera, Alex

    2013-01-01

    This invention is a magnetically actuated seal in which either a single electromagnet, or multiple electromagnets, are used to control the seal's position. This system can either be an open/ close type of system or an actively controlled system.

  13. Seal Out Tooth Decay

    MedlinePlus

    ... Topics > Tooth Decay (Caries) > Seal Out Tooth Decay Seal Out Tooth Decay Main Content What are dental ... back teeth decay so easily? Who should get seal​ants? Should sealants be put on baby teeth? ...

  14. Circumcision with "no-flip Shang Ring" and "Dorsal Slit" methods for adult males: a single-centered, prospective, clinical study.

    PubMed

    Lei, Jun-Hao; Liu, Liang-Ren; Wei, Qiang; Xue, Wen-Ben; Song, Tu-Run; Yan, Shi-Bing; Yang, Lu; Han, Ping; Zhu, Yu-Chun

    2016-01-01

    This paper was aimed to compare the clinical effectiveness and safety of adult male circumcision using the Shang Ring™ (SR) with the no-flip technique compared with Dorsal Slit (DS) surgical method. A single-centered, prospective study was conducted at the West China Hospital, where patients were circumcised using the no-flip SR (n = 408) or the DS (n = 94) procedure. The adverse events (AEs) and satisfaction were recorded for both groups, and ring-removal time and percentage of delayed removals were recorded for the SR group. Finally, complete follow-up data were collected for 76.1% of patients (SR: n = 306; DS: n = 76). The average ring-removal time for the SR group was 17.62 ± 6.30 days. The operation time (P < 0.001), pain scores during the procedure (P < 0.001) and at 24 h postoperatively (P < 0.001), bleeding (P = 0.001), infection (P = 0.034), and satisfaction with penile appearance (P < 0.001) in the SR group were superior to those in the DS group. After two postoperative weeks, the percentage of patients with edema in the SR group (P = 0.029) was higher but no differences were found at 4 weeks (P = 0.185) between the two groups. In conclusions, the no-flip SR method was found to be superior to the DS method for its short operation time (<5 min), involving less pain, bleeding, infection, and resulting in a satisfactory appearance. However, the time for recovery from edema took longer, and patients may wear device for 2-3 weeks after the procedure. PMID:26585694

  15. Titanium sealing glasses and seals formed therefrom

    DOEpatents

    Brow, Richard K.; McCollister, Howard L.; Phifer, Carol C.; Day, Delbert E.

    1997-01-01

    Alkaline-earth lanthanoborate sealing-glass compositions containing CaO, La.sub.2 O.sub.3, B.sub.2 O.sub.3, TiO.sub.2 and Al.sub.2 O.sub.3 in various combinations of mole-% are provided. These sealing-glass compositions are useful for forming hermetic glass-to-metal seals with titanium and titanium alloys that have a high aqueous durability for component or device applications requiring exposure to moisture, water or body fluids. Particular applications of the titanium sealing-glass compositions include forming glass-to-metal seals for lithium batteries and implanted biomedical devices (e.g. batteries, pacemakers, defibrillators, pumps).

  16. Titanium sealing glasses and seals formed therefrom

    DOEpatents

    Brow, R.K.; McCollister, H.L.; Phifer, C.C.; Day, D.E.

    1997-12-02

    Alkaline-earth lanthanoborate sealing-glass compositions containing CaO, La{sub 2}O{sub 3}, B{sub 2}O{sub 3}, TiO{sub 2} and Al{sub 2}O{sub 3} in various combinations of mole-% are provided. These sealing-glass compositions are useful for forming hermetic glass-to-metal seals with titanium and titanium alloys that have a high aqueous durability for component or device applications requiring exposure to moisture, water or body fluids. Particular applications of the titanium sealing-glass compositions include forming glass-to-metal seals for lithium batteries and implanted biomedical devices (e.g. batteries, pacemakers, defibrillators, pumps). 2 figs.

  17. Resilient Braided Rope Seal

    NASA Technical Reports Server (NTRS)

    Steinetz, Bruce M. (Inventor); Kren, Lawrence A. (Inventor)

    1996-01-01

    A resilient braided rope seal for use in high temperature applications. The resilient braided rope seal includes a center core of fibers, a resilient 5 member overbraided by at least one layer of braided sheath fibers tightly packed together. The resilient member adds significant stiffness to the seal while maintaining resiliency. Furthermore, the seal permanent set and hysteresis are greatly reduced. Finally, improved load capabilities are provided.

  18. Turbomachine Interface Sealing

    NASA Technical Reports Server (NTRS)

    Hendricks, Robert C.; Chupp, Raymond E.; Lattime, Scott B.; Steinetz, Bruce M.

    2005-01-01

    Sealing interfaces and coatings, like lubricants, are sacrificial, giving up their integrity for the benefit of the component. Clearance control is a major issue in power systems turbomachine design and operational life. Sealing becomes the most cost-effective way to enhance system performance. Coatings, films, and combined use of both metals and ceramics play a major role in maintaining interface clearances in turbomachine sealing and component life. This paper focuses on conventional and innovative materials and design practices for sealing interfaces.

  19. Tamper-indicating seal

    DOEpatents

    Fiarman, Sidney; Degen, Michael F.; Peters, Henry F.

    1985-01-01

    There is disclosed a tamper-indicating seal that permits in the field inspection and detection of tampering. Said seal comprises a shrinkable tube having a visible pattern of markings which is shrunk over the item to be sealed, and a second transparent tube, having a second visible marking pattern, which is shrunk over the item and the first tube. The relationship between the first and second set of markings produces a pattern so that the seal may not be removed without detection.

  20. Security seal. [Patent application

    DOEpatents

    Gobeli, G.W.

    1981-11-17

    Security for a package or verifying seal in plastic material is provided by a print seal with unique thermally produced imprints in the plastic. If tampering is attempted, the material is irreparably damaged and thus detectable. The pattern of the imprints, similar to fingerprints are recorded as a positive identification for the seal, and corresponding recordings made to allow comparison. The integrity of the seal is proved by the comparison of imprint identification records made by laser beam projection.

  1. Damping seals for turbomachinery

    NASA Technical Reports Server (NTRS)

    Vonpragenau, G. L.

    1982-01-01

    A rotor seal is proposed that restricts leakage like a labyrinth seal, but extends the stabilizing speed range beyond twice the first critical speed. The dynamic parameters were derived from bulk flow equations without requiring a dominant axial flow. The flow is considered incompressible and turbulent. Damping seals are shown to be feasible for extending the speed range of high performance turbomachinery beyond the limit imposed by conventional seals.

  2. Hermetically Sealed Compressor

    NASA Technical Reports Server (NTRS)

    Holtzapple, Mark T.

    1994-01-01

    Proposed hermetically sealed pump compresses fluid to pressure up to 4,000 atm (400 MPa). Pump employs linear electric motor instead of rotary motor to avoid need for leakage-prone rotary seals. In addition, linear-motor-powered pump would not require packings to seal its piston. Concept thus eliminates major cause of friction and wear. Pump is double-ended diaphragm-type compressor. All moving parts sealed within compressor housing.

  3. Seals development and evaluation

    SciTech Connect

    Waddoups, I.G.; Horton, P.R.V.

    1994-08-01

    This paper discusses Sandia`s support of DOE`s domestic seals program. Testing was conducted on several pressure sensitive seals and a few wire loop seals currently in use as well as on a few new seals. The testing on new seals concentrated on loop seals and included two fiber optic seals and a recently available wire loop seal being considered for use. Environmental, handling and vulnerability testing were conducted. The standardized testing approach used and the results of the testing are summarized. The status of evaluations for using higher security active and passive seals for domestic applications is also presented. The conclusion of the testing -of seals currently in use is that, even though there is some variability in their ability to meet all the test criterion, they are all generally acceptable by the test standards used. The motivation for evaluating higher security seals is to ascertain if seals could be used in broader domestic environment and result in improved cost-effectiveness.

  4. Skew resisting hydrodynamic seal

    DOEpatents

    Conroy, William T.; Dietle, Lannie L.; Gobeli, Jeffrey D.; Kalsi, Manmohan S.

    2001-01-01

    A novel hydrodynamically lubricated compression type rotary seal that is suitable for lubricant retention and environmental exclusion. Particularly, the seal geometry ensures constraint of a hydrodynamic seal in a manner preventing skew-induced wear and provides adequate room within the seal gland to accommodate thermal expansion. The seal accommodates large as-manufactured variations in the coefficient of thermal expansion of the sealing material, provides a relatively stiff integral spring effect to minimize pressure-induced shuttling of the seal within the gland, and also maintains interfacial contact pressure within the dynamic sealing interface in an optimum range for efficient hydrodynamic lubrication and environment exclusion. The seal geometry also provides for complete support about the circumference of the seal to receive environmental pressure, as compared the interrupted character of seal support set forth in U.S. Pat. Nos. 5,873,576 and 6,036,192 and provides a hydrodynamic seal which is suitable for use with non-Newtonian lubricants.

  5. Collapsable seal member

    SciTech Connect

    Sherrell, Dennis L.

    1990-01-01

    A hollow, collapsable seal member normally disposed in a natural expanded state offering fail-safe pressure sealing against a seating surface and adapted to be evacuated by a vacuum force for collapsing the seal member to disengage the same from said seating surface.

  6. Collapsable seal member

    SciTech Connect

    Sherrell, D.L.

    1983-12-08

    A hollow, collapsable seal member normally disposed in a natural expanded state offering fail-safe pressure sealing against a seating surface and adapted to be evacuated by a vacuum force for collapsing the seal member to disengage the same from said seating surface.

  7. Rough/Smooth Rotary Seal

    NASA Technical Reports Server (NTRS)

    Chen, W. C.; Jackson, E. D.

    1986-01-01

    Rotary seal for turbopump combines low leakage of labyrinth seal with high load capacity of smooth-surface annular seal. New seal acts as strong journal bearing that provides high stiffness - about same as that of ball bearings for turbopump shaft. Seal shares load with ball bearings and prolongs their lives. At same time, seal allows minimal leakage of fluid from pump. By combining leakage control and bearing functions, seal makes multiple seals unnecessary and allows compact design.

  8. Saturn's Rings

    NASA Astrophysics Data System (ADS)

    Cuzzi, J. N.

    2014-12-01

    The rings are changing before our eyes; structure varies on all timescales and unexpected things have been discovered. Many questions have been answered, but some answers remain elusive (see Cuzzi et al 2010 for a review). Here we highlight the major ring science progress over the mission to date, and describe new observations planned for Cassini's final three years. Ring Composition and particle sizes: The rings are nearly all water ice with no other ices - so why are they reddish? The C Ring and Cassini Division are "dirtier" than the more massive B and A Rings, as shown by near-IR and, recently, microwave observations. Particle sizes, from stellar and radio occultations, vary from place to place. Ring structure, micro and macro: numerous spiral density waves and ubiquitous "self-gravity wakes" reveal processes which fostered planet formation in the solar system and elsewhere. However, big puzzles remain regarding the main ring divisions, the C Ring plateau structures, and the B Ring irregular structure. Moonlets, inside and out, seen and unseen: Two gaps contain sizeable moonlets, but more gaps seem to contain none; even smaller embedded "propeller" objects wander, systematically or randomly, through the A ring. Rubble pile ringmoons just outside the rings may escaped from the rings, and the recently discovered "Peggy" may be trying this as we watch. Impact bombardment of the rings: Comet fragments set the rings to rippling on century-timescales, and boulders crash through hourly; meanwhile, the constant hail of infalling Kuiper belt material has a lower mass flux than previously thought. Origin and Age of the Rings: The ring mass and bombardment play key roles. The ring mass is well known everywhere but in the B Ring (where most of it is). New models suggest how tidal breakup of evolving moons may have formed massive ancient rings, of which the current ring is just a shadow. During its last three years, the Cassini tour profile will allow entirely new

  9. SEAL FOR ROTATING SHAFT

    DOEpatents

    Coffman, R.T.

    1957-12-10

    A seal is described for a rotatable shaft that must highly effective when the shaft is not rotating but may be less effective while the shaft is rotating. Weights distributed about a sealing disk secured to the shaft press the sealing disk against a tubular section into which the shiilt extends, and whem the shaft rotates, the centrifugal forces on the weights relieve the pressurc of the sealing disk against the tubular section. This action has the very desirible result of minimizing the wear of the rotating disk due to contact with the tubular section, while affording maximum sealing action when it is needed.

  10. Tamper-indicating seal

    DOEpatents

    Fiarman, S.; Degen, M.F.; Peters, H.F.

    1982-08-13

    There is disclosed a tamper-indicating seal that permits in the field inspection and detection of tampering. Said seal comprises a shrinkable tube having a visible pattern of markings which is shrunk over th item to be sealed, and a second transparent tube, having a second visible marking pattern, which is shrunk over the item and the first tube. The relationship between the first and second set of markings produces a pattern so that the seal may not be removed without detection. The seal is particularly applicable to UF/sub 6/ cylinder valves.

  11. Low Cost, Durable Seal

    SciTech Connect

    Roberts, George; Parsons, Jason; Friedman, Jake

    2010-12-17

    Seal durability is critical to achieving the 2010 DOE operational life goals for both stationary and transportation PEM fuel cell stacks. The seal material must be chemically and mechanically stable in an environment consisting of aggressive operating temperatures, humidified gases, and acidic membranes. The seal must also be producible at low cost. Currentlyused seal materials do not meet all these requirements. This project developed and demonstrated a high consistency hydrocarbon rubber seal material that was able to meet the DOE technical and cost targets. Significant emphasis was placed on characterization of the material and full scale molding demonstrations.

  12. Air Force Seal Programs

    NASA Technical Reports Server (NTRS)

    Mayhew, Ellen R.

    1996-01-01

    Seal technology development is an important part of the Air Force's participation in the Integrated High Performance Turbine Engine Technology (IHPTET) initiative, the joint DOD, NASA, ARPA, and industry endeavor to double turbine engine capabilities by the turn of the century. Significant performance and efficiency improvements can be obtained through reducing internal flow system leakage, but seal environment requirements continue to become more extreme as the engine thermodynamic cycles advance towards these IHPTET goals. Seal technology continues to be pursued by the Air Force to control leakage at the required conditions. This presentation briefly describes current seal research and development programs and gives a summary of seal applications in demonstrator and developmental engines.

  13. Fuel cell manifold sealing system

    DOEpatents

    Grevstad, Paul E.; Johnson, Carl K.; Mientek, Anthony P.

    1980-01-01

    A manifold-to-stack seal and sealing method for fuel cell stacks. This seal system solves the problem of maintaining a low leak rate manifold seal as the fuel cell stack undergoes compressive creep. The seal system eliminates the problem of the manifold-to-stack seal sliding against the rough stack surface as the stack becomes shorter because of cell creep, which relative motion destroys the seal. The seal system described herein utilizes a polymer seal frame firmly clamped between the manifold and the stack such that the seal frame moves with the stack. Thus, as the stack creeps, the seal frame creeps with it, and there is no sliding at the rough, tough to seal, stack-to-seal frame interface. Here the sliding is on a smooth easy to seal location between the seal frame and the manifold.

  14. Python fiber-optic seal

    SciTech Connect

    Ystesund, K.; Bartberger, J.; Brusseau, C.; Fleming, P.; Insch, K.; Tolk, K.

    1993-12-31

    Sandia National Laboratories (SNL) has developed a high-security fiber-optic seal that incorporates tamper-resistance features not available in commercial fiber-optic seals. The Python Seal is a passive fiber-optic loop seal designed to give indication of unauthorized entry. The seal includes a fingerprint feature that provides seal identity information in addition to the unique fiber-optic pattern created when the seal is installed. The fiber-optic cable used for the seal loop is produced with tamper-resistant features that increase the difficulty of attacking this component of a seal. A Seal Reader has been developed that records the seal signature and the fingerprint feature of the seal. A Correlator software program compares seal images to establish a match or mismatch. SNL also is developing a Polaroid Reader to permit hard copies of the seal patterns to be obtained directly from the seal.

  15. Performance of Subscale Docking Seals Under Simulated Temperature Conditions

    NASA Technical Reports Server (NTRS)

    Smith, Ian M.; Daniels, Christopher C.

    2008-01-01

    A universal docking system is being developed by the National Aeronautics and Space Administration (NASA) to support future space exploration missions to low Earth orbit (LEO), to the moon, and to Mars. The candidate docking seals for the system are a composite design consisting of elastomer seal bulbs molded into the front and rear sides of a metal ring. The test specimens were subscale seals with two different elastomer cross-sections and a 12-in. outside diameter. The seal assemblies were mated in elastomer seal-on-metal plate and elastomer seal-on-elastomer seal configurations. The seals were manufactured from S0383-70 silicone elastomer compound. Nominal and off-nominal joint configurations were examined. Both the compression load required to mate the seals and the leak rate observed were recorded while the assemblies were subjected to representative docking system operating temperatures of -58, 73, and 122 F (-50, 23, and 50 C). Both the loads required to fully compress the seals and their leak rates were directly proportional to the test temperature.

  16. Rotary kiln seal

    DOEpatents

    Drexler, Robert L.

    1992-01-01

    A rotary seal used to prevent the escape of contaminates from a rotating kiln incinerator. The rotating seal combines a rotating disc plate which is attached to the rotating kiln shell and four sets of non-rotating carbon seal bars housed in a primary and secondary housing and which rub on the sides of the disc. A seal air system is used to create a positive pressure in a chamber between the primary and secondary seals to create a positive air flow into the contaminated gas chamber. The seal air system also employs an air inlet located between the secondary and tertiary seals to further insure that no contaminates pass the seal and enter the external environment and to provide makeup air for the air which flows into the contaminated gas chamber. The pressure exerted by the seal bars on the rotating disc is controlled by means of a preload spring. The seal is capable of operating in a thermally changing environment where the both radial expansion and axial movement of the rotating kiln do not result in the failure of the seal.

  17. Zero leakage sealings

    NASA Astrophysics Data System (ADS)

    Kotesovec, Bernhard; Steinrück, Herbert

    2010-11-01

    The piston rod of a reciprocating compressor is sealed with elastic cylindrical sealing elements. Across the sealings the pressure drops from the operating pressure to the ambient pressure. The lubrication gap between the elastic sealing and reciprocating piston rod is studied with the aim to find conditions of a leakage free sealing. The flow in the lubrication gap and the elastic deformation of the sealing are determined simultaneously. The net-flow during one cycle of the reciprocating piston rod is calculated. It turns out that maintaining zero leakage is very sensible. Indeed the outbound flow during out-stroke has to be equal the inbound flow during the in-stroke. By prescribing a special shape of the undeformed sealing zero leakage can be attained - at least theoretically for certain operating conditions. It turns out that temperature dependent material data and a model for cavitation is necessary. The model, its numerical implementation and results will be discussed.

  18. Humoral and cell-mediated immunity to the Plasmodium falciparum ring-infected erythrocyte surface antigen in an adult population exposed to highly endemic malaria.

    PubMed Central

    Beck, H P; Felger, I; Genton, B; Alexander, N; al-Yaman, F; Anders, R F; Alpers, M

    1995-01-01

    A parasitological and immunological survey was carried out in an area in Papua New Guinea highly endemic for malaria. Two hundred fourteen adult individuals were selected for studies to assess their immune responses against the malaria vaccine candidate ring-infected erythrocyte surface antigen (RESA). Total immunoglobulin G (IgG) antibodies directed against RESA as well as specific IgG1, IgG2, and IgG3 antibodies were determined. Humoral responses directed against RESA were frequent in all IgG subclasses. Only IgG3 responses were found to be age dependent. Total anti-RESA IgG antibodies were not correlated with protection against malaria as measured by parasite prevalence, parasite density, or health center attendance. In contrast, cytophilic antibodies (IgG1 and IgG3) were associated with reduced Plasmodium falciparum prevalence and reduced health center attendance. T-cell proliferation in general was low and very infrequent. No correlation between humoral and cellular immune responses could be found. Parasite density, parasite prevalence, and health center visits tended to be reduced in individuals with good humoral and cell-mediated immune responses. PMID:7822028

  19. Seasonal energetics of northern phocid seals.

    PubMed

    Ochoa-Acuña, Hugo G; McNab, Brian K; Miller, Edward H

    2009-03-01

    The metabolic rate of harp (Pagophilus groenlandicus), harbor (Phoca vitulina), and ringed seals (Pusa hispida) was measured at various temperatures in air and water to estimate basal metabolic rates (BMRs) in these species. The basal rate and body composition of three harp seals were also measured throughout the year to examine the extent to which they vary seasonally. Marine mammalian carnivores generally have BMRs that are over three times the rates expected from body mass in mammals generally, both as a response to a cold-water distribution and to carnivorous food habits with the basal rates of terrestrial carnivores averaging about 1.8 times the mean of mammals. Phocid seals, however, have basal rates of metabolism that are 30% lower than other marine carnivores. Captive seals undergo profound changes in body mass and food consumption throughout the year, and after accounting for changes in body mass, the lowest rate of food intake occurs in summer. Contrary to earlier observations, harp seals also have lower basal rates during summer than during winter, but the variation in BMR, relative to mass expectations, was not associated with changes in the size of fat deposits. The summer reduction in energy expenditure and food consumption correlated with a reduction in BMR. That is, changes in BMR account for a significant portion of the seasonal variation in energy expenditure in the harp seal. Changes in body mass of harp seals throughout the year were due not only to changes in the size of body fat deposits, but also to changes in lean body mass. These results suggest that bioenergetics models used to predict prey consumption by seals should include time-variant energy requirements. PMID:19049825

  20. Vascular ring

    MedlinePlus

    ... with aberrant subclavian and left ligamentum ateriosus; Congenital heart defect - vascular ring; Birth defect heart - vascular ring ... accounts for less than 1% of all congenital heart problems. The condition occurs as often in males ...

  1. Neptune's rings

    NASA Technical Reports Server (NTRS)

    1999-01-01

    This 591-second exposure of the rings of Neptune were taken with the clear filter by the Voyager 2 wide-angle camera. The two main rings are clearly visible and appear complete over the region imaged. Also visible in this image is the inner faint ring and the faint band which extends smoothly from the ring roughly halfway between the two bright rings. Both of these newly discovered rings are broad and much fainter than the two narrow rings. The bright glare is due to over-exposure of the crescent on Neptune. Numerous bright stars are evident in the background. Both bright rings have material throughout their entire orbit, and are therefore continuous. The Voyager Mission is conducted by JPL for NASA's Office of Space Science and Applications.

  2. Development of a new seal for use on large openings of pressurized spacecraft

    NASA Technical Reports Server (NTRS)

    Weddendorf, B.

    1994-01-01

    The goal of this project was to design, build, and test an example of the seal invented by the author for use on Space Station Freedom and patented in 1991. The seal features a metallic spring core and replaceable elastomeric sealing elements. The metallic spring is designed to retain the sealing force of the elastomeric element against both sides of face seal gland for any specified amount of waviness or separation of the glands. A seal able to tolerate at least 1.3 mm (0.05 in) of flange distortion or separation and a test fixture of this seal which allowed direct comparison testing of O-rings were built. These designs were tested to compare leakage at different amounts of flange deflection. Results of the testing show the development seal exceeded its requirement to seal 1.3 mm of flange separation by 1 mm. This compared with the O-ring leakage, increasing dramatically at 0.5 mm of separation. The development seal also leaked at a lower rate than the O-ring seals in all tests.

  3. Analysis and Design of a Double-Divert Spiral Groove Seal

    NASA Technical Reports Server (NTRS)

    Zheng, Xiaoqing; Berard, Gerald

    2007-01-01

    This viewgraph presentation describes the design and analysis of a double spiral groove seal. The contents include: 1) Double Spiral Design Features; 2) Double Spiral Operational Features; 3) Mating Ring/Rotor Assembly; 4) Seal Ring Assembly; 5) Insert Segment Joints; 6) Rotor Assembly Completed Prototype Parts; 7) Seal Assembly Completed Prototype Parts; 8) Finite Element Analysis; 9) Computational Fluid Dynamics (CFD) Analysis; 10) Restrictive Orifice Design; 11) Orifice CFD Model; 12) Orifice Results; 13) Restrictive Orifice; 14) Seal Face Coning; 15) Permanent Magnet Analysis; 16) Magnetic Repulsive Force; 17) Magnetic Repulsive Test Results; 18) Spin Testing; and 19) Testing and Validation.

  4. COMPRESSION SEAL AND SEALING MATERIAL THEREFOR

    DOEpatents

    Branin, T.G.

    1962-05-29

    This patent relates to compression seal and more particularly to a seaiing material therefor. The sealing surface is a coating consisting of alternate layers of gold and of a non-gold metal having similar plastic flow properties under pressure as gold. The coating is substantially free from oxidation effects when exposed to ambient atmosphere and does not become brittle when worked, as in a valve. (AEC)

  5. Shaft seal system

    DOEpatents

    Kapich, Davorin D.

    1985-01-01

    A shaft seal system is disclosed for isolating two regions of different fluid mediums through which a rotatable shaft extends. The seal system includes a seal housing through which the shaft extends and which defines an annular land and an annular labyrinth both of which face on the shaft so that each establishes a corresponding fluid sealing annulus. A collection cavity is formed in communication with the annular sealing spaces, and fluids compatible with the fluids in each of the two regions to be isolated are introduced, respectively, into the annular sealing spaces and collected in the collection cavity from which the fluid mixture is removed and passed to a separator which separates the fluids and returns them to their respective annular sealing spaces in a recycling manner. In the illustrated embodiment, the isolated fluid mediums comprise a liquid region and a gas region. Gas is removed from the gas region and passed through a purifier and a gas pump operative to introduce the purified gas through the labyrinth sealing annulus to the collection cavity. After passing to the separator, the separated gas is passed through a dryer from which the dried gas is caused to pass through the labyrinth sealing annulus into the collection cavity independently of the purified gas so as to insure isolation of the gas region in the event of sealing gas pump malfunction.

  6. HERPESVIRUSES INCLUDING NOVEL GAMMAHERPESVIRUSES ARE WIDESPREAD AMONG PHOCID SEAL SPECIES IN CANADA.

    PubMed

    Bellehumeur, Christian; Nielsen, Ole; Measures, Lena; Harwood, Lois; Goldstein, Tracey; Boyle, Brian; Gagnon, Carl A

    2016-01-01

    Little is known about herpesviruses in Canadian pinnipeds. We measured prevalence of antibodies to herpesviruses in the sera from Canadian phocid seals by an indirect enzyme-linked immunosorbent assay. Wild harbor seals (Phoca vitulina) and captive harbor seals were positive for antibodies to Phocid herpesvirus 1 (PhoHV-1) at prevalences of 91% and 100%, respectively. Sera from wild hooded seals (Cystophora cristata), harp seals (Pagophilus groenlandica), and grey seals (Halichoerus grypus) were positive for antibodies to PhoHV-1 antigenically related herpesvirus antigens at 73%, 79%, and 96%, respectively. We isolated new herpesviruses in cell culture from two hunter-harvested ringed seals (Pusa hispida) in poor body condition from Ulukhaktok, Northwest Territories, Canada; one lethargic hooded seal from the St. Lawrence Estuary, Québec, Canada; and one captive, asymptomatic harp seal from the Magdalen Islands, Québec. Partial sequencing of the herpesvirus DNA polymerase gene revealed that all four virus isolates were closely related to PhoHV-2, a member of the Gammaherpesvirinae subfamily, with nucleotide similarity ranging between 92.8% and 95.3%. The new seal herpesviruses were genetically related to other known pinniped herpesviruses, such as PhoHV-1, Otariid herpesvirus 3, Hawaiian monk (Monachus schauinslandi) seal herpesvirus, and Phocid herpesvirus 5 with 47-48%, 55%, 77%, and 70-77% nucleotide similarities, respectively. The harp seal herpesvirus and both ringed seal herpesviruses were almost identical to each other, whereas the hooded seal herpesvirus was genetically different from the three others (92.8% nucleotide similarity), indicating detection of at least two novel seal herpesviruses. These findings are the first isolation, partial genome sequencing, and identification of seal gammaherpesviruses in three species of Canadian phocid seals; two species of which were suspected of exposure to one or more antigenically related herpesviruses based on

  7. A Reusable, Low-profile, Cryogenic Wire Seal.

    PubMed

    Stewart, M D; Koutroulakis, G; Kalechofsky, N; Mitrović, V F

    2010-01-01

    We describe the design of a reusable Indium wire seal which has a small profile and is leak tight to better than 1x10(-10) std. cc/sec. from room temperature down to approximately mK. The pressure necessary to deform the Indium wire o-ring is provided by a screw-cap mating to threads on the outside of the cylindrical volume to be sealed. PMID:20161550

  8. Caps Seal Boltholes On Vacuum-System Flanges

    NASA Technical Reports Server (NTRS)

    Roman, Robert F.

    1993-01-01

    Sealing caps devised for boltholes on vacuum-system flanges. Used in place of leak-prone gaskets, and provide solid metal-to-metal interfaces. Each sealing cap contains square-cut circular groove in which O-ring placed. Mounted on studs protruding into access ports, providing positive seal around each bolthole. Each cap mates directly with surface of flange, in solid metal-to-metal fit, with O-ring completely captured in groove. Assembly immune to misalignment, leakage caused by vibration, and creeping distortion caused by weight of port. O-ring material chosen for resistance to high temperature; with appropriate choice of material, temperature raised to as much as 315 degrees C.

  9. Contracting/expanding self-sealing cryogenic tube seals

    NASA Technical Reports Server (NTRS)

    Jia, Lin X. (Inventor)

    1997-01-01

    Contracting/expanding self-sealing cryogenic tube seals are disclosed which use the different properties of thermal contraction and expansion of selected dissimilar materials in accord with certain design criteria to yield self-tightening seals via sloped-surface sealing. The seals of the subject invention are reusable, simple to assemble, adaptable to a wide variety of cryogenic applications.

  10. Contracting/expanding self-sealing cryogenic tube seals

    NASA Technical Reports Server (NTRS)

    Jia, Lin X. (Inventor)

    1997-01-01

    Contracting/expanding self-sealing cryogenic tube seals are disclosed which use the different properties of thermal contraction and expansion of selected dissimilar materials in accord with certain design criteria to yield self-tightening seals via sloped-surface sealing. The seals of the subject invention are reusable, simple to assemble, and adaptable to a wide variety of cryogenic applications.

  11. Seals Code Development Workshop

    NASA Technical Reports Server (NTRS)

    Hendricks, Robert C. (Compiler); Liang, Anita D. (Compiler)

    1996-01-01

    Seals Workshop of 1995 industrial code (INDSEAL) release include ICYL, GCYLT, IFACE, GFACE, SPIRALG, SPIRALI, DYSEAL, and KTK. The scientific code (SCISEAL) release includes conjugate heat transfer and multidomain with rotordynamic capability. Several seals and bearings codes (e.g., HYDROFLEX, HYDROTRAN, HYDROB3D, FLOWCON1, FLOWCON2) are presented and results compared. Current computational and experimental emphasis includes multiple connected cavity flows with goals of reducing parasitic losses and gas ingestion. Labyrinth seals continue to play a significant role in sealing with face, honeycomb, and new sealing concepts under investigation for advanced engine concepts in view of strict environmental constraints. The clean sheet approach to engine design is advocated with program directions and anticipated percentage SFC reductions cited. Future activities center on engine applications with coupled seal/power/secondary flow streams.

  12. Dynamic sealing principles

    NASA Technical Reports Server (NTRS)

    Zuk, J.

    1976-01-01

    The fundamental principles governing dynamic sealing operation are discussed. Different seals are described in terms of these principles. Despite the large variety of detailed construction, there appear to be some basic principles, or combinations of basic principles, by which all seals function, these are presented and discussed. Theoretical and practical considerations in the application of these principles are discussed. Advantages, disadvantages, limitations, and application examples of various conventional and special seals are presented. Fundamental equations governing liquid and gas flows in thin film seals, which enable leakage calculations to be made, are also presented. Concept of flow functions, application of Reynolds lubrication equation, and nonlubrication equation flow, friction and wear; and seal lubrication regimes are explained.

  13. Compliant Turbomachine Sealing

    NASA Technical Reports Server (NTRS)

    Hendricks, R. C.; Braun, M. J.; Deng, D.; Hendricks, J. A.

    2011-01-01

    Sealing interface materials and coatings are sacrificial, giving up their integrity for the benefit of the component. Seals that are compliant while still controlling leakage, dynamics, and coolant flows are sought to enhance turbomachine performance. Herein we investigate the leaf-seal configuration. While the leaf seal is classified as contacting, a ready modification using the leaf-housing arrangement in conjunction with an interface film rider (a bore seal, for example) provides for a film-riding noncontact seal. The leaf housing and leaf elements can be made from a variety of materials from plastic to ceramic. Four simplistic models are used to identify the physics essential to controlling leakage. Corroborated by CFD, these results provide design parameters for applications to within reasonable engineering certainty. Some potential improvements are proposed.

  14. Layered seal for turbomachinery

    DOEpatents

    Sarawate, Neelesh Nandkumar; Morgan, Victor John; Weber, David Wayne

    2015-11-20

    The present application provides seal assemblies for reducing leakages between adjacent components of turbomachinery. The seal assemblies may include outer shims, and at least a portion of the outer shims may be substantially impervious. At least one of the outer shims may be configured for sealing engagement with seal slots of the adjacent components. The seal assemblies may also include at least one of an inner shim and a filler layer positioned between the outer shims. The at least one inner shim may be substantially solid and the at least one filler layer may be relatively porous. The seal assemblies may be sufficiently flexible to account for misalignment between the adjacent components, sufficiently stiff to meet assembly requirements, and sufficiently robust to operating meet requirements associated with turbomachinery.

  15. Air Force seal activities

    NASA Technical Reports Server (NTRS)

    Mayhew, Ellen R.

    1994-01-01

    Seal technology development is an important part of the Air Force's participation in the Integrated High Performance Turbine Engine Technology (IHPTET) initiative, the joint DOD, NASA, ARPA, and industry endeavor to double turbine engine capabilities by the turn of the century. Significant performance and efficiency improvements can be obtained through reducing internal flow system leakage, but seal environment requirements continue to become more extreme as the engine thermodynamic cycles advance towards these IHPTET goals. Brush seal technology continues to be pursued by the Air Force to reduce leakage at the required conditions. Likewise, challenges in engine mainshaft air/oil seals are also being addressed. Counter-rotating intershaft applications within the IHPTET initiative involve very high rubbing velocities. This viewgraph presentation briefly describes past and current seal research and development programs and gives a summary of seal applications in demonstrator and developmental engine testing.

  16. Double face sealing device

    NASA Technical Reports Server (NTRS)

    Weddendorf, Bruce C. (Inventor)

    1991-01-01

    A double face sealing device for mounting between two surfaces to provide an airtight and fluid-tight seal between a closure member bearing one of the surfaces and a structure or housing bearing the other surface which extends around the opening or hatchway to be closed. The double face sealing device includes a plurality of sections or segments mounted to one of the surfaces, each having a main body portion, a pair of outwardly extending and diverging, cantilever, spring arms, and a pair of inwardly extending and diverging, cantilever, spring arms, an elastomeric cover on the distal, free, ends of the outwardly extending and diverging spring arms, and an elastomeric cover on the distal, free, ends of the inwardly extending and diverging spring arms. The double face sealing device has application or use in all environments requiring a seal, but is particularly useful to seal openings or hatchways between compartments of spacecraft or aircraft.

  17. Sodium sulfur battery seal

    DOEpatents

    Mikkor, Mati

    1981-01-01

    This disclosure is directed to an improvement in a sodium sulfur battery construction in which a seal between various battery compartments is made by a structure in which a soft metal seal member is held in a sealing position by holding structure. A pressure applying structure is used to apply pressure on the soft metal seal member when it is being held in sealing relationship to a surface of a container member of the sodium sulfur battery by the holding structure. The improvement comprises including a thin, well-adhered, soft metal layer on the surface of the container member of the sodium sulfur battery to which the soft metal seal member is to be bonded.

  18. Seals Flow Code Development

    NASA Technical Reports Server (NTRS)

    1991-01-01

    In recognition of a deficiency in the current modeling capability for seals, an effort was established by NASA to develop verified computational fluid dynamic concepts, codes, and analyses for seals. The objectives were to develop advanced concepts for the design and analysis of seals, to effectively disseminate the information to potential users by way of annual workshops, and to provide experimental verification for the models and codes under a wide range of operating conditions.

  19. Retractable environmental seal

    NASA Technical Reports Server (NTRS)

    Dettling, J. R. (Inventor)

    1979-01-01

    A retractable environmental seal for use in sealing the opening of the exit cone for a rocket nozzle is described. A diaphragm-like cover having a central region adapted to be seated in sealing relation with the periphery of the opening is discussed. Radially extended failure zones for facilitating a pressure-induced rupture of the cover, and a plurality of angularly spaced tension springs connected with the peripheral portion of the cover are characterized.

  20. Grayloc seal static tests

    SciTech Connect

    Leisher, W.B.; Biffle, J.H.

    1983-02-01

    A series of evaluation tests was performed on Grayloc seals. Helium service and standard seals, size 292, were used. Measurements were made of axial force and motion, diameter, hoop and axial strain, and helium leak rate. Leak rates were in the 10/sup -6/ atm cc/s range for the helium service seals. Pretest analytical calculations agreed reasonably well with measured makeup forces and deflections.

  1. Liquid Annular Seal Research

    NASA Technical Reports Server (NTRS)

    Palazzolo, Alan B.; Venkataraman, Balaji; Padavala, Sathya S.; Ryan, Steve; Vallely, Pat; Funston, Kerry

    1996-01-01

    This paper highlights the accomplishments on a joint effort between NASA - Marshall Space Flight Center and Texas A and M University to develop accurate seal analysis software for use in rocket turbopump design, design audits and trouble shooting. Results for arbitrary clearance profile, transient simulation, thermal effects solution and flexible seal wall model are presented. A new solution for eccentric seals based on cubic spline interpolation and ordinary differential equation integration is also presented.

  2. An Overview of Advanced Elastomeric Seal Development and Testing Capabilities at NASA Glenn Research Center

    NASA Technical Reports Server (NTRS)

    Dunlap, Patrick H., Jr.

    2014-01-01

    NASA is developing advanced space-rated elastomeric seals to support future space exploration missions to low Earth orbit, the Moon, near Earth asteroids, and other destinations. This includes seals for a new docking system and vehicle hatches. These seals must exhibit extremely low leak rates to ensure that astronauts have sufficient breathable air for extended missions. Seal compression loads must be below prescribed limits so as not to overload the mechanisms that compress them, and seal adhesion forces must be low to allow the sealed interface to be separated when required (e.g., during undocking or hatch opening). NASA Glenn Research Center has developed a number of unique test fixtures to measure the leak rates and compression and adhesion loads of candidate seal designs under simulated thermal, vacuum, and engagement conditions. Tests can be performed on full-scale seals with diameters on the order of 50 in., subscale seals that are about 12 in. in diameter, and smaller specimens such as O-rings. Test conditions include temperatures ranging from -238 to +662F (-150 to +350C), operational pressure gradients, and seal-on-seal or seal-on-flange mating configurations. Nominal and off-nominal conditions (e.g., incomplete seal compression) can also be simulated. This paper describes the main design features and capabilities of each test apparatus and provides an overview of advanced seal development activities at NASA Glenn.

  3. An Overview of Advanced Elastomeric Seal Development and Testing Capabilities at NASA Glenn Research Center

    NASA Technical Reports Server (NTRS)

    Dunlap, Patrick H.

    2014-01-01

    NASA is developing advanced space-rated elastomeric seals to support future space exploration missions to low Earth orbit, the Moon, near Earth asteroids, and other destinations. This includes seals for a new docking system and vehicle hatches. These seals must exhibit extremely low leak rates to ensure that astronauts have sufficient breathable air for extended missions. Seal compression loads must be below prescribed limits so as not to overload the mechanisms that compress them, and seal adhesion forces must be low to allow the sealed interface to be separated when required (e.g., during undocking or hatch opening). NASA Glenn Research Center has developed a number of unique test fixtures to measure the leak rates and compression and adhesion loads of candidate seal designs under simulated thermal, vacuum, and engagement conditions. Tests can be performed on full-scale seals with diameters on the order of 50 in., subscale seals that are about 12 in. in diameter, and smaller specimens such as O-rings. Test conditions include temperatures ranging from -238 to 662 F (-150 to 350 C), operational pressure gradients, and seal-on-seal or seal-on-flange mating configurations. Nominal and off-nominal conditions (e.g., incomplete seal compression) can also be simulated. This paper describes the main design features and capabilities of each type of test apparatus and provides an overview of advanced seal development activities at NASA Glenn.

  4. An Overview of Advanced Elastomeric Seal Development and Testing Capabilities at NASA Glenn Research Center

    NASA Technical Reports Server (NTRS)

    Dunlap, Patrick H., Jr.

    2014-01-01

    NASA is developing advanced space-rated elastomeric seals to support future space exploration missions to low Earth orbit, the Moon, near Earth asteroids, and other destinations. This includes seals for a new docking system and vehicle hatches. These seals must exhibit extremely low leak rates to ensure that astronauts have sufficient breathable air for extended missions. Seal compression loads must be below prescribed limits so as not to overload the mechanisms that compress them, and seal adhesion forces must be low to allow the sealed interface to be separated when required (e.g., during undocking or hatch opening). NASA Glenn Research Center has developed a number of unique test fixtures to measure the leak rates and compression and adhesion loads of candidate seal designs under simulated thermal, vacuum, and engagement conditions. Tests can be performed on fullscale seals with diameters on the order of 50 in., subscale seals that are about 12 in. in diameter, and smaller specimens such as O-rings. Test conditions include temperatures ranging from -238 to 662degF (-150 to 350degC), operational pressure gradients, and seal-on-seal or seal-on-flange mating configurations. Nominal and off-nominal conditions (e.g., incomplete seal compression) can also be simulated. This paper describes the main design features and capabilities of each type of test apparatus and provides an overview of advanced seal development activities at NASA Glenn.

  5. Rotating Brush Seal

    NASA Technical Reports Server (NTRS)

    Lattime, S. B.; Braun, M. J.; Choy. F. K.; Hendricks, R. C.; Steinetz, B. M.

    2006-01-01

    The proven technology of brush seals has been extended to the mitigation of problems arising from friction and wear at the bristle-rotor interface at high surface speeds. In prototype testing, the brush is mounted on, and free to rotate with the shaft, thus providing a complaint primary seal. A face seal positioned between the backing plate of the brush seal and the housing provides a secondary seal. The purpose of this paper is to demonstrate the interaction between the brush bristles and the shaft at high surface speeds as well as introduce a numerical model to simulate the bristle behavior. A test facility was constructed to study the effects of centrifugal forces on bristle deflection in a single rotating brush seal. The bristle-rotor interface was observed through a video camera, which utilized a high magnification borescope and a high frequency strobe light source. Rotational speeds of the rotor and the brush seal were measured by a magnetic and optical speed sensor, respectively. Preliminary results with speeds up to 11,000 rpm show no speed differential between the brush seal and rotor, or any instability problems associated with the brush seal. Bristle liftoff from the rotor is successfully captured on video.

  6. Ceramic brush seals development

    NASA Technical Reports Server (NTRS)

    Howe, Harold

    1994-01-01

    The following topics are discussed in this viewgraph presentation: ceramic brush seals, research and development, manufacturing, brazed assembly development, controlling braze flow, fiber selection, and braze results.

  7. Liquid zone seal

    DOEpatents

    Klebanoff, Leonard E.

    2001-01-01

    A seal assembly that provides a means for establishing multiple pressure zones within a system. The seal assembly combines a plate extending from the inner wall of a housing or inner enclosure that intersects with and is immersed in the fluid contained in a well formed in a tray contained within the enclosure. The fluid is a low vapor pressure oil, chemically inert and oxidation resistant. The use of a fluid as the sealing component provides a seal that is self-healing and mechanically robust not subject to normal mechanical wear, breakage, and formation of cracks or pinholes and decouples external mechanical vibrations from internal structural members.

  8. Repository seals requirements study

    SciTech Connect

    1997-11-03

    The Yucca Mountain Site Characterization Project, managed by the Civilian Radioactive Waste Management System (CRWMS) Management and Operating Contractor (M and O) is conducting investigations to support the Viability Assessment and the License Application for a high-level nuclear waste repository at Yucca Mountain, Nevada. The sealing subsystem is part of the Yucca Mountain Waste Isolation System. The Yucca Mountain Site Characterization Project is currently evaluating the role of the sealing subsystem (shaft, ramp and exploratory borehole seals) in achieving the overall performance objectives for the Waste Isolation System. This report documents the results of those evaluations. This report presents the results of a repository sealing requirements study. Sealing is defined as the permanent closure of the shafts, ramps, and exploratory boreholes. Sealing includes those components that would reduce potential inflows above the repository, or that would divert flow near the repository horizon to allow vertical infiltration to below the repository. Sealing of such features as emplacement drifts was not done in this study because the current capability to calculate fracture flow into the drifts is not sufficiently mature. The objective of the study is to provide water or air flow performance based requirements for shafts, ramps, and exploratory boreholes located near the repository. Recommendations, as appropriate, are provided for developing plans, seals component testing, and other studies relating to sealing.

  9. Compliant Foil Seal Investigations

    NASA Technical Reports Server (NTRS)

    Proctor, Margaret; Delgado, Irebert

    2003-01-01

    NASA Glenn Research Center has been working with Mohawk Innovative Technology, Inc. (MiTi) to develop a Compliant Foil Seal for use in gas turbine engines. MiTi was awarded phase I and phase II SBIR contracts to analyze, develop, and test foil seals. As part of the Phase II contract, MiTi delivered an 8.5 inch diameter foil seal to NASA GRC for testing. Today I will be presenting some results of testing the 8.5 inch foil seal at NASA.

  10. Bidirectional Brush Seals

    NASA Technical Reports Server (NTRS)

    Hendricks, Robert C.; Wilson, Jack; Wu, Tom; Flower, Ralph

    1997-01-01

    Presented is a study of the use of a set of I.D./O.D. bidirectional press seals to reduce the leakage losses in a wave rotor. Relative to the baseline configuration, data indicate the use of brush seals enhanced wave rotor efficiency from 36 to 45 percent at low leakages (small rotor endwall gap spacings) and from 15 to 33 percent at high leakages (larger endwall gap spacings). These brush seals are capable of sealing positive or negative pressure drops with respect to the axial direction. Surface tribology for these tests suggested little evidence of grooving although the bristles appeared polished.

  11. Planetary Rings

    NASA Astrophysics Data System (ADS)

    Gordon, M. K.; Araki, S.; Black, G. J.; Bosh, A. S.; Brahic, A.; Brooks, S. M.; Charnoz, S.; Colwell, J. E.; Cuzzi, J. N.; Dones, L.; Durisen, R. H.; Esposito, L. W.; Ferrari, C.; Festou, M.; French, R. G.; Giuliatti-Winter, S. M.; Graps, A. L.; Hamilton, D. P.; Horanyi, M.; Karjalainen, R. M.; Krivov, A. V.; Krueger, H.; Larson, S. M.; Levison, H. F.; Lewis, M. C.; Lissauer, J. J.; Murray, C. D.; Namouni, F.; Nicholson, P. D.; Olkin, C. B.; Poulet, F.; Rappaport, N. J.; Salo, H. J.; Schmidt, J.; Showalter, M. R.; Spahn, F.; Spilker, L. J.; Srama, R.; Stewart, G. R.; Yanamandra-Fisher, P.

    2002-08-01

    The past two decades have witnessed dramatic changes in our view and understanding of planetary rings. We now know that each of the giant planets in the Solar System possesses a complex and unique ring system. Recent studies have identified complex gravitational interactions between the rings and their retinues of attendant satellites. Among the four known ring systems, we see elegant examples of Lindblad and corotation resonances (first invoked in the context of galactic disks), electromagnetic resonances, spiral density waves and bending waves, narrow ringlets which exhibit internal modes due to collective instabilities, sharp-edged gaps maintained via tidal torques from embedded moonlets, and tenuous dust belts created by meteoroid impact onto, or collisions between, parent bodies. Yet, as far as we have come, our understanding is far from complete. The fundamental questions confronting ring scientists at the beginning of the twenty-first century are those regarding the origin, age and evolution of the various ring systems, in the broadest context. Understanding the origin and age requires us to know the current ring properties, and to understand the dominant evolutionary processes and how they influence ring properties. Here we discuss a prioritized list of the key questions, the answers to which would provide the greatest improvement in our understanding of planetary rings. We then outline the initiatives, missions, and other supporting activities needed to address those questions, and recommend priorities for the coming decade in planetary ring science.

  12. A new tribological test for candidate brush seal materials evaluation

    SciTech Connect

    Fellenstein, J.A.; DellaCorte, C.

    1994-10-01

    A new tribological test for candidate brush seal materials evaluation has been developed. The sliding contact between the brush seal wires and their mating counterface journal is simulated by testing a small tuft of wire against the outside diameter of a high speed rotating shaft. The test configuration is similar to a standard block on ring geometry. The new tester provides the capability to measure both the friction and wear of candidate wire and counterface materials under controlled loading conditions in the gram to kilogram range. A wide test condition latitude of speeds (1 to 27 m/s), temperatures (25 to 700C), and loads (0.5 to 10 N) enables the simulation of many of the important tribological parameters found in turbine engine brush seals. This paper describes the new test rig and specimen configuration and presents initial data for candidate seal materials comparing tuft test results and wear surface morphology to field tested seal components.

  13. A New Tribological Test for Candidate Brush Seal Materials Evaluation

    NASA Technical Reports Server (NTRS)

    Fellenstein, James A.; Dellacorte, Christopher

    1994-01-01

    A new tribological test for candidate brush seal materials evaluation has been developed. The sliding contact between the brush seal wires and their mating counterface journal is simulated by testing a small tuft of wire against the outside diameter of a high speed rotating shaft. The test configuration is similar to a standard block on ring geometry. The new tester provides the capability to measure both the friction and wear of candidate wire and counterface materials under controlled loading conditions in the gram to kilogram range. A wide test condition latitude of speeds (1 to 27 m/s), temperatures (25 to 700 C), and loads (0.5 to 10 N) enables the simulation of many of the important tribological parameters found in turbine engine brush seals. This paper describes the new test rig and specimen configuration and presents initial data for candidate seal materials comparing tuft test results and wear surface morphology to field tested seal components.

  14. Measured effect of step axial location on labyrinth seal leakage

    SciTech Connect

    Morrison, G.L.; Rhode, D.L. )

    1992-12-01

    An advanced, finite volume code has been extensively used in a parametric design study of simple stepped seals, in order to ascertain a leakage-minimizing optimal design and test it, in conjunction with the baseline case of the wear-ring seal of a high pressure pump. It is found that a significant leakage effect arises from this shifting of the rotor and stator sealing surfaces; at extremely low rpm, a significant shaft speed effect occurs for the optimized design in some shaft locations. 3 refs.

  15. Measured effect of step axial location on labyrinth seal leakage

    NASA Astrophysics Data System (ADS)

    Morrison, G. L.; Rhode, D. L.

    1992-12-01

    An advanced, finite volume code has been extensively used in a parametric design study of simple stepped seals, in order to ascertain a leakage-minimizing optimal design and test it, in conjunction with the baseline case of the wear-ring seal of a high pressure pump. It is found that a significant leakage effect arises from this shifting of the rotor and stator sealing surfaces; at extremely low rpm, a significant shaft speed effect occurs for the optimized design in some shaft locations.

  16. Measured effect of step axial location on labyrinth seal leakage

    NASA Technical Reports Server (NTRS)

    Morrison, G. L.; Rhode, D. L.

    1992-01-01

    An advanced, finite volume code has been extensively used in a parametric design study of simple stepped seals, in order to ascertain a leakage-minimizing optimal design and test it, in conjunction with the baseline case of the wear-ring seal of a high pressure pump. It is found that a significant leakage effect arises from this shifting of the rotor and stator sealing surfaces; at extremely low rpm, a significant shaft speed effect occurs for the optimized design in some shaft locations.

  17. Method of sealing a high performance automotive engine and engine assembly

    SciTech Connect

    Rosenquist, G.A.

    1994-01-04

    A method of sealing a high performance internal combustion engine with a head gasket having a fire ring comprising providing a groove in the head or block generally concentric with each said combustion opening, each groove having a land area and a generally vertical wall, and positioning the gasket on the block so that when the head is torqued down, each groove receives a fire ring and compresses the wire ring thereof to provide a primary seal therewith at the land area, the wall engages the armor of the fire ring to form a secondary seal, and the head and block clamping surfaces engage the armor to clamp the armor. The head gasket has a main body of a first thickness including a central core and facing layers laminated to the core, and defines a plurality of combustion openings. A fire ring is disposed and secured in each combustion opening, each fire ring comprising a generally U-shaped armor having a pair of legs overlying and underlying the main body adjacent a combustion opening and a central body connecting the legs and ensheathing a wire ring for providing a combustion seal. In use, the combustion seal provides a labyrinth seal against the spaced surfaces of the groove and against a corner defined by the groove. 6 figs.

  18. Dynamic whirl in well-aligned, liquid-lubricated end-face seals with hydrostatic tilt instability

    SciTech Connect

    Metcalfe, R.

    1980-01-01

    Dynamic whirl in well-aligned, fully liquid-lubricated end-face seals is analyzed and tested. As with whirl of journal bearings, seal whirl occurs under lightly loaded conditions, in this case controlled by balance ratio. The two common seal arrangements are analyzed, including effects of the elastomer secondary sealing elements. Whirling is found to be induced by hydrostatic tilt instability and controlled hydrodynamically. Elastomer effects tend to suppress seal whirl, while seal-ring inertia effects are generally insignificant. Test results support the analysis and give insight into the relative magnitudes of liquid film and elastomer moments with variations of pressure, shaft speed and whirl amplitude.

  19. MOLDED SEALING ELEMENT

    DOEpatents

    Bradford, B.W.; Skinner, W.J.

    1959-03-24

    Molded sealing elements suitable for use under conditions involving exposure to uranium hexafluoride vapor are described. Such sealing elements are made by subjecting graphitic carbons to a preliminary treatment with uranium hexafluoride vapor, and then incorporating polytetrafluorethylene in them. The resulting composition has good wear resistant and frictional properties and is resistant to disintegration by uranium hexafluoride over long periods of exposure.

  20. Seals and Scrolls.

    ERIC Educational Resources Information Center

    Macaulay, Sara Grove

    2000-01-01

    Describes an art unit in which students sculpt a signature seal out of clay and use Chinese brush painting techniques to paint a scroll. Discusses the seal and its historical use in China. Lists materials needed and explains the procedure. (CMK)

  1. Sodium sulfur battery seal

    DOEpatents

    Topouzian, Armenag

    1980-01-01

    This invention is directed to a seal for a sodium sulfur battery in which a flexible diaphragm sealing elements respectively engage opposite sides of a ceramic component of the battery which separates an anode compartment from a cathode compartment of the battery.

  2. Resilient Braided Rope Seal

    NASA Technical Reports Server (NTRS)

    Steinetz, Bruce M. (Inventor); Kren, Lawrence A. (Inventor)

    2000-01-01

    A resilient braided rope seal for use in high temperature applications includes a center core of fibers. a resilient canted spring member supporting the core and at least one layer of braided sheath fibers tightly packed together overlying the spring member. The seal provides both improved load bearing and resiliency. Permanent set and hysteresis are greatly reduced.

  3. Flexible Seal Accommodates Part Mismatch

    NASA Technical Reports Server (NTRS)

    Bobb, I.

    1983-01-01

    Chain of plates embedded in flexible seal enables it to withstand side loading of 2,300 psi (116MPa) while sealing gap of up to 0.5 inch (13 mm) between cylindrical chamber wall and test fixture. Pressure-actuated seal along inner edge forces seal into contact even though cylinder wall becomes eccentric as cylinder pressure increases. Seal has many industrial applications, particularly where heat or pressure causes distortion of chamber being sealed.

  4. High temperature hydraulic seals

    NASA Astrophysics Data System (ADS)

    Williams, K. R.

    1993-05-01

    This program investigated and evaluated high temperature hydraulic sealing technology, including seals, fluids, and actuator materials. Test limits for fluid pressure and temperature were 8000 psi and 700 F respectively. The original plan to investigate CTFE fluid at 350 F as well as other fluids at higher temperatures was reduced in scope to include only the higher temperature investigation. Seals were obtained from 11 manufacturers. Design requirements including materials, dimensions, clearances, and tolerances were established and test modules were constructed from the detail designs which were produced. Nine piston seals and one rod seal were tested at temperatures ranging from -65 to +600 F and pressures to 6000 psi. Fluid performance under these conditions was evaluated. Details of this activity and results of the effort are summarized in this report.

  5. Sealing in Turbomachinery

    NASA Technical Reports Server (NTRS)

    Chupp, Raymond E.; Hendricks, Robert C.; Lattime, Scott B.; Steinetz, Bruce M.

    2006-01-01

    Clearance control is of paramount importance to turbomachinery designers and is required to meet today's aggressive power output, efficiency, and operational life goals. Excessive clearances lead to losses in cycle efficiency, flow instabilities, and hot gas ingestion into disk cavities. Insufficient clearances limit coolant flows and cause interface rubbing, overheating downstream components and damaging interfaces, thus limiting component life. Designers have put renewed attention on clearance control, as it is often the most cost effective method to enhance system performance. Advanced concepts and proper material selection continue to play important roles in maintaining interface clearances to enable the system to meet design goals. This work presents an overview of turbomachinery sealing to control clearances. Areas covered include: characteristics of gas and steam turbine sealing applications and environments, benefits of sealing, types of standard static and dynamics seals, advanced seal designs, as well as life and limitations issues.

  6. SSME interstage seal research

    NASA Technical Reports Server (NTRS)

    Childs, D. W.

    1984-01-01

    Test results comprising direct and transverse force coefficients and leakage coefficients are reported for six seal configurations. All seals tested use the same smooth rotor and have the same constant minimum clearance. The following stator configurations were tested: (1) Smooth, (2) knurled pattern, (3) axially-grooved pattern with end seals, (4) diamond-grid roughened, (5) diamond-grid roughened with end seals, and (6) round-hole pattern. Comparison of the seals shows the Knurled-pattern stator to be the stiffest and the round-hole pattern stator to yield the largest net damping and the least leakage. The theory of reference is shown to substantially underestimate the stiffness and effective-added-mass coefficients, but do a reasonable job in predicting the net-damping-force coefficient.

  7. Transmission seal development

    NASA Technical Reports Server (NTRS)

    Brien, M.

    1977-01-01

    An experimental evaluation was performed on a high-speed (72.9 m/s, 14,349 ft/min) transmission seal of the synergistic type. During testing of the seal, oil leakage occurred at positive bearing cavity pressures. Modifications were made in an attempt to eliminate the leakage but none were completely successful. Leakage appears to be the result of questionable positioning of the sealing elements resulting in inadequate shaft contact by the oil side sealing element. This condition may be related to the nonsymmetrical shape of the elastomeric retainer and to dimensional changes caused by swelling of the elastomeric retainer from exposure to the sealed fluid. Indications of a speed dependent leakage characteristic were also observed.

  8. Repository seals requirement study

    SciTech Connect

    1997-11-03

    The Yucca Mountain Site Characterization Project, managed by the Civilian Radioactive Waste Management System (CRWMS) Management and Operating Contractor (M and O) is conducting investigations to support the Viability Assessment and the License Application for a high-level nuclear waste repository at Yucca Mountain, Nevada. The sealing subsystem is part of the Yucca Mountain Waste Isolation System. The Yucca Mountain Site Characterization Project is currently evaluating the role of the sealing subsystem (shaft, ramp and exploratory borehole seals) in achieving the overall performance objectives for the Waste Isolation System. This report documents the results of those evaluations. The objective of the study is to provide water or air flow performance based requirements for shafts, ramps, and exploratory boreholes located near the repository. Recommendations, as appropriate, are provided for developing plans, seals component testing, and other studies relating to sealing.

  9. Rotary shaft seal

    DOEpatents

    Langebrake, Clair O.

    1984-01-01

    The invention is a novel rotary shaft seal assembly which provides positive-contact sealing when the shaft is not rotated and which operates with its sealing surfaces separated by a film of compressed ambient gas whose width is independent of the speed of shaft rotation. In a preferred embodiment, the assembly includes a disc affixed to the shaft for rotation therewith. Axially movable, non-rotatable plates respectively supported by sealing bellows are positioned on either side of the disc to be in sealing engagement therewith. Each plate carries piezoelectric transducer elements which are electrically energized at startup to produce films of compressed ambient gas between the confronting surfaces of the plates and the disc. Following shutdown of the shaft, the transducer elements are de-energized. A control circuit responds to incipient rubbing between the plate and either disc by altering the electrical input to the transducer elements to eliminate rubbing.

  10. Rotary shaft seal

    DOEpatents

    Langebrake, C.O.

    1984-01-01

    The invention is a novel rotary shaft seal assembly which provides positive-contact sealing when the shaft is not rotated and which operates with its sealing surfaces separated by a film of compressed ambient gas whose width is independent of the speed of shaft rotation. In a preferred embodiment, the assembly includes a disc affixed to the shaft for rotation therewith. Axially movable, non-rotatable plates respectively supported by sealing bellows are positioned on either side of the disc to be in sealing engagement therewith. Each plate carries piezoelectric transucer elements which are electrically energized at startup to produce films of compressed ambient gas between the confronting surfaces of the plates and the disc. Following shutdown of the shaft, the transducer elements are de-energized. A control circuit responds to incipient rubbing between the plate and either disc by altering the electrical input to the transducer elements to eliminate rubbing.

  11. Turbocharger with variable nozzle having vane sealing surfaces

    DOEpatents

    Arnold, Philippe; Petitjean, Dominique; Ruquart, Anthony; Dupont, Guillaume; Jeckel, Denis

    2011-11-15

    A variable nozzle for a turbocharger includes a plurality of vanes rotatably mounted on a nozzle ring and disposed in a nozzle flow path defined between the nozzle ring and an opposite nozzle wall. Either or both of the faces of the nozzle ring and nozzle wall include(s) at least one step that defines sealing surfaces positioned to be substantially abutted by airfoil surfaces of the vanes in the closed position of the vanes and to be spaced from the airfoil surfaces in positions other than the closed position. This substantial abutment between the airfoil surfaces and the sealing surfaces serves to substantially prevent exhaust gas from leaking past the ends of the airfoil portions. At the same time, clearances between the nozzle ring face and the end faces of the airfoil portions can be sufficiently large to prevent binding of the vanes under all operating conditions.

  12. Planetary Rings

    NASA Technical Reports Server (NTRS)

    Cuzzi, Jeffrey N.

    1994-01-01

    Just over two decades ago, Jim Pollack made a critical contribution to our understanding of planetary ring particle properties, and resolved a major apparent paradox between radar reflection and radio emission observations. At the time, particle properties were about all there were to study about planetary rings, and the fundamental questions were, why is Saturn the only planet with rings, how big are the particles, and what are they made of? Since then, we have received an avalanche of observations of planetary ring systems, both from spacecraft and from Earth. Meanwhile, we have seen steady progress in our understanding of the myriad ways in which gravity, fluid and statistical mechanics, and electromagnetism can combine to shape the distribution of the submicron-to-several-meter size particles which comprise ring systems into the complex webs of structure that we now know them to display. Insights gained from studies of these giant dynamical analogs have carried over into improved understanding of the formation of the planets themselves from particle disks, a subject very close to Jim's heart. The now-complete reconnaissance of the gas giant planets by spacecraft has revealed that ring systems are invariably found in association with families of regular satellites, and there is ark emerging perspective that they are not only physically but causally linked. There is also mounting evidence that many features or aspects of all planetary ring systems, if not the ring systems themselves, are considerably younger than the solar system

  13. Approximate Solution for Choked Flow in Gas Seal Pads

    NASA Technical Reports Server (NTRS)

    Fleming, David P.

    2004-01-01

    Previous analyses of high pressure seals have considered adiabatic flow with friction but neglected effects of seal rotation. Most of this work analyzed a one-dimensional flow field. This works well to calculate stiffness and leakage of full circular seals, either face seals or annular ring seals. However, it cannot provide accurate results for a rectangular seal pad with its strongly two-dimensional flow field and its reliance on hydrodynamic forces to maintain a full fluid film. On the other hand, solutions of Reynolds lubrication equation have been obtained for the two-dimensional flow in a seal pad. But these solutions do not account for choking which occurs at high seal pressure ratios, nor do they consider the pressure loss that occurs in the entrance region of the flow field. The aim of the present work is to build on the Reynolds equation solution by use of an approximate choked flow analysis. This will account for the pressure losses in the flow entrance region, ensure that fluid velocities remain subsonic, and enable fluid inertial effects within the pad film to be accounted for. Results show that, in general, fluid inertia acts to decrease pad film load capacity and leakage, and increase film stiffness.

  14. Diving seals: are they a model for coping with oxidative stress?

    PubMed

    Zenteno-Savín, T; Clayton-Hernández, E; Elsner, R

    2002-12-01

    The diving lifestyle of seals depends upon cardiovascular adjustments that result in frequent vasoconstriction of numerous organs. With the first post-dive breath, reperfusion allows for eliminating accumulated carbon dioxide (CO(2)) and reloading oxygen (O(2)) stores. Reintroduction of oxygenated blood raises the potential for production of reactive oxygen species (ROS) and the possibility that they may overwhelm the antioxidant defenses. This study addresses the question of possible adaptive responses that allow ringed seal (Phoca hispida) tissues to tolerate repeated cycles of ischemia and reperfusion, and thus protect them from oxidative insult. We obtained samples of ringed seal heart, muscle and kidney through the cooperation of native subsistence hunters at Barrow, Alaska. Samples were subjected to oxidative stress by addition of xanthine oxidase. Production of superoxide radical (O(2)(.-)), lipid peroxidation (as determined by the presence of thiobarbituric acid reactive substances, TBARS) and antioxidant capacity (AOX) were quantified by spectrophotometric analysis. Similarly treated pig tissues were anticipated to be more susceptible to oxidative stress. Contrary to expectations, pig tissues revealed less O(2)(.-) and TBARS compared with ringed seal tissues. These results show that ringed seal muscle, heart and kidney can be induced in vitro to generate ROS, and suggest that the living seal's protective defenses may depend upon O(2)(.-) production, similar to the protective effect of experimental preconditioning, or on enhanced intermediate scavenging, as evidenced by the larger AOX found in ringed seal tissues. PMID:12458181

  15. Seals Flow Code Development 1993

    NASA Technical Reports Server (NTRS)

    Liang, Anita D. (Compiler); Hendricks, Robert C. (Compiler)

    1994-01-01

    Seals Workshop of 1993 code releases include SPIRALI for spiral grooved cylindrical and face seal configurations; IFACE for face seals with pockets, steps, tapers, turbulence, and cavitation; GFACE for gas face seals with 'lift pad' configurations; and SCISEAL, a CFD code for research and design of seals of cylindrical configuration. GUI (graphical user interface) and code usage was discussed with hands on usage of the codes, discussions, comparisons, and industry feedback. Other highlights for the Seals Workshop-93 include environmental and customer driven seal requirements; 'what's coming'; and brush seal developments including flow visualization, numerical analysis, bench testing, T-700 engine testing, tribological pairing and ceramic configurations, and cryogenic and hot gas facility brush seal results. Also discussed are seals for hypersonic engines and dynamic results for spiral groove and smooth annular seals.

  16. Noncontacting Finger Seal

    NASA Technical Reports Server (NTRS)

    Proctor, Margaret P. (Inventor); Steinetz, Bruce M. (Inventor)

    2004-01-01

    An annular finger seal is adapted to be interposed between a high pressure upstream region and a lower pressure downstream region to provide noncontact sealing along a rotatable member. The finger seal comprises axially juxtaposed downstream and upstream finger elements, each having integrally spaced fingers. The downstream fingers each have a lift pad, whereas the upstream fingers lack a pad. Each pad extends in a downstream direction. Each upstream finger is spaced from the rotating member a greater distance than each pad. Upon sufficient rotational speed of the rotating member, each pad is operative to lift and ride on a thin film of fluid intermediate the rotating member and the Pad.

  17. Bellow seal and anchor

    DOEpatents

    Mansure, Arthur J.

    2001-01-01

    An annular seal is made of a collapsible bellows. The bellows can function as an anchor or a seal and is easily set into position using relative component movement. The bellows folds can be slanted and their outer sealing edges can have different profiles to meet expected conditions. The bellows is expanded for insertion to reduce its outer dimension and sets by compaction as a result of relative movement. The bellows can be straight or tapered and is settable with a minimal axial force.

  18. SEALING SIMULATED LEAKS

    SciTech Connect

    Michael A. Romano

    2004-09-01

    This report details the testing equipment, procedures and results performed under Task 7.2 Sealing Simulated Leaks. In terms of our ability to seal leaks identified in the technical topical report, Analysis of Current Field Data, we were 100% successful. In regards to maintaining seal integrity after pigging operations we achieved varying degrees of success. Internal Corrosion defects proved to be the most resistant to the effects of pigging while External Corrosion proved to be the least resistant. Overall, with limitations, pressure activated sealant technology would be a viable option under the right circumstances.

  19. Damping seals for turbomachinery

    NASA Technical Reports Server (NTRS)

    Vonpragenau, G. L.

    1985-01-01

    Rotor whirl stabilization of high performance turbomachinery which operates at supercritical speed is discussed. Basic whirl driving forces are reviewed. Stabilization and criteria are discussed. Damping seals are offered as a solution to whirl and high vibration problems. Concept, advantages, retrofitting, and limits of damping seals are explained. Dynamic and leakage properties are shown to require a rough stator surface for stability and efficiency. Typical seal characteristics are given for the case of the high pressure oxidizer turbopump of the Space Shuttle. Ways of implementation and bearing load effects are discussed.

  20. PCBs and OCPs in male harbour, grey, harp and hooded seals from the Estuary and Gulf of St Lawrence, Canada.

    PubMed

    Hobbs, Karen E; Lebeuf, Michel; Hammill, Mike O

    2002-09-16

    Blubber samples from adult male harbour seals (Phoca vitulina) from the St Lawrence Estuary, and from grey (Halichoerus grypus), harp (Phoca groenlandica) and hooded (Cystophora cristata) seals from the Gulf of St Lawrence, were analysed for polychlorinated biphenyls (PCB) and organochlorinated pesticides (OCP). All seals were between 5 and 19 years of age, and mean ages were not statistically different among the seal species. Mean concentrations of sigmaPCB and mirex were significantly higher in harbour seals, while sigmaDDT concentrations were significantly higher in hooded seals than in the other species examined. Harbour and hooded seals had similar concentrations of sigmaCHLOR, which were higher than in grey and harp seals. SigmaHCH concentrations were significantly higher in harp seals than in harbour and hooded seals and they were significantly higher in harbour and grey seals than in hooded seals. Harp and grey seals had similar levels of HCB, which were significantly higher than in either hooded or harbour seals. Patterns of PCB congeners and individual OCPs varied considerably between the four species. In PCA plots harbour, harp and hooded seals were well separated from each other, while grey seals were separated from the other species by a smaller degree. Between species variations may be explained by their dissimilar migratory patterns, habitat use and proximity to sources of industrial and agricultural pollution, their dietary regime (trophic level and individual prey items) as well as possible variations in the seals' abilities to eliminate these compounds. PMID:12398323

  1. CENTRIFUGAL PUMP AND SHAFT SEALING MEANS

    DOEpatents

    Rushing, F.C.

    1960-09-01

    A description is given of sealing means between a hollow rotatable shaft and a stationary member surrounding the shaft which defines therewith a sealing space of annular cross-section, comprising a plurality of axially spaced rings held against seats by ring springs which serve to subdivide the sealing space- into a plurality of zones. Process gas introduced into the hollow shaft through a port communicating with a centrally located zone which iu turn communicates with a bore in the sleeve, is removed from the shaft through a second port communicating with an adjacent central zone and discharged through a second bore. A sealant gas is supplied to an end zone under a pressure sufficient to cause it to flow axially into adjacent zones and then maintained at a lower pressure than either the sealant gas source or the process gas inlet zone, preventing the sealant gas from entering the shaft and allowing gases leaking into the sealant gas to be withdrawn and led to a separator.

  2. Multilayer compressive seal for sealing in high temperature devices

    DOEpatents

    Chou, Yeong-Shyung; Stevenson, Jeffry W.

    2007-08-21

    A mica based compressive seal has been developed exhibiting superior thermal cycle stability when compared to other compressive seals known in the art. The seal is composed of compliant glass or metal interlayers and a sealing (gasket) member layer composed of mica that is infiltrated with a glass forming material, which effectively reduces leaks within the seal. The compressive seal shows approximately a 100-fold reduction in leak rates compared with previously developed hybrid seals after from 10 to about 40 thermal cycles under a compressive stress of from 50 psi to 100 psi at temperatures in the range from 600.degree. C. to about 850.degree. C.

  3. Flight set 360H005 (STS-28) seals, volume 4

    NASA Technical Reports Server (NTRS)

    Curry, Jeffrey T.

    1990-01-01

    The performance is assessed of the 360H005, Fifth flight, Redesigned Solid Rocket Motors (RSMR) in respect to joint sealing issues as seen from post flight inspection of the seals and sealing surfaces. The factory joint disassembly inspections have resumed for 360H005. The new factory joint grease application is in effect and now can be assessed during the disassembly process. The RSRM is illustrated consisting of capture feature field joints as is the J-joint insulation configuration. The nozzle-to-case joint design is also illustrated, which includes 100, 7/8 inch radial bolts in conjunction with a wiper O-ring and modified insulation design. The ignition system seals and a cross section of the igniter are illustrated. The configuration of all the internal nozzle joints are also shown. The postflight inspection of both motors showed the seal components to be in excellent condition except for the indentation found on the inner primary seal of the right hand inner igniter gasket, aft face. Detailed inspection results, and inspections performed by the O-ring Inspection Team are presented.

  4. Sealing a rubber bladder between two sections of an accumulator

    NASA Technical Reports Server (NTRS)

    Schartau, G. M.

    1969-01-01

    Leak-free clamping of a two section accumulator is accomplished by a flat metallic ring molded peripherally to the rubber flange of the bladder, and an inset rubber seal bonded to the face of the flange of each section. Method maintains constant torque on the clamping bolts.

  5. Engine sealing and lubrication systems

    NASA Technical Reports Server (NTRS)

    Zuk, J.

    1975-01-01

    Engine sealing programs are discussed which are directed toward the two major classes of engine seals: engine shaft seals and primary gas path seals. In addition, some concepts and results from fundamental lubrication research, as it pertains to the lubrication of bearings, are presented.

  6. High Temperature Metallic Seal Development

    NASA Astrophysics Data System (ADS)

    Datta, Amit; More, D. Greg

    2002-10-01

    A high temperature static seal capable of long term operation at temperature ranging from 1400 F to 1800 F is presented. The contents include: 1) Development approach; 2) Stress relaxation curves; 3) High temperature seal test rig; 4) High temperature seal design; and 5) High temperature seal testing. This paper is in viewgraph form.

  7. Turbine seal assembly

    DOEpatents

    Little, David A.

    2013-04-16

    A seal assembly that limits gas leakage from a hot gas path to one or more disc cavities in a turbine engine. The seal assembly includes a seal apparatus that limits gas leakage from the hot gas path to a respective one of the disc cavities. The seal apparatus comprises a plurality of blade members rotatable with a blade structure. The blade members are associated with the blade structure and extend toward adjacent stationary components. Each blade member includes a leading edge and a trailing edge, the leading edge of each blade member being located circumferentially in front of the blade member's corresponding trailing edge in a direction of rotation of the turbine rotor. The blade members are arranged such that a space having a component in a circumferential direction is defined between adjacent circumferentially spaced blade members.

  8. Flexible cloth seal assembly

    DOEpatents

    Bagepalli, Bharat Sampathkumar; Taura, Joseph Charles; Aksit, Mahmut Faruk; Demiroglu, Mehmet; Predmore, Daniel Ross

    1999-01-01

    A seal assembly having a flexible cloth seal which includes a shim assemblage surrounded by a cloth assemblage. A first tubular end portion, such as a gas turbine combustor, includes a longitudinal axis and has smooth and spaced-apart first and second surface portions defining a notch therebetween which is wider at its top than at its bottom and which extends outward from the axis. The second surface portion is outside curved, and a first edge of the cloth seal is positioned in the bottom of the notch. A second tubular end portion, such as a first stage nozzle, is located near, spaced apart from, and coaxially aligned with, the first tubular end portion. The second tubular end portion has a smooth third surface portion which surrounds at least a portion of the first tubular end portion and which is contacted by the cloth seal.

  9. Gas turbine sealing apparatus

    SciTech Connect

    Marra, John Joseph; Wessell, Brian J.; Liang, George

    2013-03-05

    A sealing apparatus in a gas turbine. The sealing apparatus includes a seal housing apparatus coupled to a disc/rotor assembly so as to be rotatable therewith during operation of the gas turbine. The seal housing apparatus comprises a base member, a first leg portion, a second leg portion, and spanning structure. The base member extends generally axially between forward and aft rows of rotatable blades and is positioned adjacent to a row of stationary vanes. The first leg portion extends radially inwardly from the base member and is coupled to the disc/rotor assembly. The second leg portion is axially spaced from the first leg portion, extends radially inwardly from the base member, and is coupled to the disc/rotor assembly. The spanning structure extends between and is rigidly coupled to each of the base member, the first leg portion, and the second leg portion.

  10. Flexible cloth seal assembly

    DOEpatents

    Bagepalli, B.S.; Taura, J.C.; Aksit, M.F.; Demiroglu, M.; Predmore, D.R.

    1999-06-29

    A seal assembly is described having a flexible cloth seal which includes a shim assemblage surrounded by a cloth assemblage. A first tubular end portion, such as a gas turbine combustor, includes a longitudinal axis and has smooth and spaced-apart first and second surface portions defining a notch there between which is wider at its top than at its bottom and which extends outward from the axis. The second surface portion is outside curved, and a first edge of the cloth seal is positioned in the bottom of the notch. A second tubular end portion, such as a first stage nozzle, is located near, spaced apart from, and coaxially aligned with, the first tubular end portion. The second tubular end portion has a smooth third surface portion which surrounds at least a portion of the first tubular end portion and which is contacted by the cloth seal. 7 figs.

  11. Ingestion resistant seal assembly

    DOEpatents

    Little, David A.

    2011-12-13

    A seal assembly limits gas leakage from a hot gas path to one or more disc cavities in a gas turbine engine. The seal assembly includes a seal apparatus associated with a blade structure including a row of airfoils. The seal apparatus includes an annular inner shroud associated with adjacent stationary components, a wing member, and a first wing flange. The wing member extends axially from the blade structure toward the annular inner shroud. The first wing flange extends radially outwardly from the wing member toward the annular inner shroud. A plurality of regions including one or more recirculation zones are defined between the blade structure and the annular inner shroud that recirculate working gas therein back toward the hot gas path.

  12. Conduit sealing system

    SciTech Connect

    Weinberg, R.A.

    1984-02-28

    The invention relates to an annular seal system designed for high pressure applications in subterranean wells. The annular seal system comprises a vertical stack of subassemblies. Each subassembly incorporates an annular sealing element formed from an elastomeric material, such as a perfluoroelastomer, which is provided with a truncated pear-shaped cross-sectional configuration having reversely curved axial side surfaces. The sealing element is abutted on each axial side by a uniform thickness annular bearing element formed from a thermoplastic such as a polyphenylene sulfide resin having good bearing properties. Each of the thermoplastic bearing elements is in turn abutted by an annular metallic restraining element having correspondingly shaped reversely curved axial side surfaces and defining an inverted truncated pear-shaped cross-sectional configuration.

  13. Sealing Force Increasing of ACM Gasket through Electron Beam Radiation

    NASA Astrophysics Data System (ADS)

    dos Santos, D. J.; Batalha, G. F.

    2011-01-01

    Rubber is an engineering material largely used as sealing parts, in form of O-rings, solid gaskets and liquid gaskets, materials applied in liquid state with posterior vulcanization and sealing. Stress relaxation is a rubber characteristic which impacts negatively in such industrial applications (rings and solid gaskets). This work has the purpose to investigate the use of electron beam radiation (EB) as a technology able to decrease the stress relaxation in acrylic rubber (ACM), consequently increasing the sealing capability of this material. ACM samples were irradiated with dose of 100 kGy and 250 kGy, its behavior was comparatively investigated using, dynamic mechanical analysis (DMA) and compression stress relaxation (CSR) experiments. The results obtained by DMA shown an increase of Tg and changes in dynamic mechanical behavior.

  14. Core disruptive accident margin seal

    DOEpatents

    Golden, Martin P.

    1979-01-01

    Apparatus for sealing the annulus defined within a substantially cylindrical rotatable riser assembly and plug combination of a nuclear reactor closure head. The apparatus comprises an inflatable sealing mechanism disposed in one portion of the riser assembly near the annulus such that upon inflation the sealing mechanism is radially actuated against the other portion of the riser assembly thereby sealing the annulus. The apparatus further comprises a connecting mechanism which places one end of the sealing mechanism in fluid communication with the reactor cover gas so that overpressurization of the reactor cover gas will increase the radial actuation of the sealing mechanism thus enhancing sealing of the annulus.

  15. Current developments in brush seals

    NASA Astrophysics Data System (ADS)

    Loewenthal, Bob

    1994-07-01

    The objective of the brush seal development program is to develop a comprehensive design methodology for brush seals using application requirements from engine manufacturers and experimental characterization of seal design and tribological pairs. The goals are to substantially lower leakage compared to labyrinth seals, seal life consistent with man-rated mission requirements, to investigate single and multiple staged brush seals, temperature up to 1200 F and surface speed up to 900 fps, and pressure drop across the seal of 50 psid. Test results are presented in viewgraph format.

  16. Seal system with integral detector

    DOEpatents

    Fiarman, S.

    1982-08-12

    A seal system is disclosed for materials where security is of the essence, such as nuclear materials. The seal is tamper-indicating, indicates changes in environmental conditions that evidence attempts to bypass the seal, is unique and cost effective. The seal system is comprised of a seal where an optical signal is transmitted through a loop, with a detector to read said signal, and one or more additional detectors designed to detect environmental changes, these detectors being operatively associated with the seal so that detection of a break in the optical signal or detection of environmental changes will cause an observable change in the seal.

  17. Radial pressure flange seal

    DOEpatents

    Batzer, T.H.; Call, W.R.

    1989-01-24

    This invention provides an all metal seal for vacuum or pressure vessels or systems. This invention does not use gaskets. The invention uses a flange which fits into a matching groove. Fluid pressure is applied in a chamber in the flange causing at least one of the flange walls to radially press against a side of the groove creating the seal between the flange wall and the groove side. 5 figs.

  18. Radial pressure flange seal

    DOEpatents

    Batzer, Thomas H.; Call, Wayne R.

    1989-01-01

    This invention provides an all metal seal for vacuum or pressure vessels or systems. This invention does not use gaskets. The invention uses a flange which fits into a matching groove. Fluid pressure is applied in a chamber in the flange causing at least one of the flange walls to radially press against a side of the groove creating the seal between the flange wall and the groove side.

  19. Titanium hermetic seals

    DOEpatents

    Brow, Richard K.; Watkins, Randall D.

    1995-07-04

    Titanium is prenitrided by being heated in a nitrogen environment under conditions which give rise to the formation of a titanium-nitride surface layer on the titanium. Titanium thus prenitrided may be used in electrical components which are hermetically sealed using silicate glasses and standard glass sealing techniques. According to the method of the invention, alkali volatilization and formation of deleterious interfacial silicide are inhibited.

  20. Titanium hermetic seals

    DOEpatents

    Brow, Richard K.; Watkins, Randall D.

    1995-01-01

    Titanium is prenitrided by being heated in a nitrogen environment under conditions which give rise to the formation of a titanium-nitride surface layer on the titanium. Titanium thus prenitrided may be used in electrical components which are hermetically sealed using silicate glasses and standard glass sealing techniques. According to the method of the invention, alkali volatilization and formation of deleterious interfacial silicide are inhibited.

  1. Vascular rings.

    PubMed

    Backer, Carl L; Mongé, Michael C; Popescu, Andrada R; Eltayeb, Osama M; Rastatter, Jeffrey C; Rigsby, Cynthia K

    2016-06-01

    The term vascular ring refers to congenital vascular anomalies of the aortic arch system that compress the esophagus and trachea, causing symptoms related to those two structures. The most common vascular rings are double aortic arch and right aortic arch with left ligamentum. Pulmonary artery sling is rare and these patients need to be carefully evaluated for frequently associated tracheal stenosis. Another cause of tracheal compression occurring only in infants is the innominate artery compression syndrome. In the current era, the diagnosis of a vascular ring is best established by CT imaging that can accurately delineate the anatomy of the vascular ring and associated tracheal pathology. For patients with a right aortic arch there recently has been an increased recognition of a structure called a Kommerell diverticulum which may require resection and transfer of the left subclavian artery to the left carotid artery. A very rare vascular ring is the circumflex aorta that is now treated with the aortic uncrossing operation. Patients with vascular rings should all have an echocardiogram because of the incidence of associated congenital heart disease. We also recommend bronchoscopy to assess for additional tracheal pathology and provide an assessment of the degree of tracheomalacia and bronchomalacia. The outcomes of surgical intervention are excellent and most patients have complete resolution of symptoms over a period of time. PMID:27301603

  2. Double face sealing device

    NASA Technical Reports Server (NTRS)

    Weddendorf, Bruce (Inventor)

    1991-01-01

    A double face sealing device is disclosed for mounting between two surfaces to provide an air-tight and fluid-tight seal between a closure member bearing one of the surfaces and a structure or housing bearing the other surface which extends around the opening or hatchway to be closed. The double face sealing device includes a plurality of sections or segments mounted to one of the surfaces, each having a main body portion, a pair of outwardly extending and diverging, cantilever, spring arms, and a pair of inwardly extending and diverging, cantilever, spring arms, an elastomeric cover on the distal, free ends of the outwardly extending and diverging spring arms, and an elastomeric cover on the distal, free, ends of the outwardly extending and diverging spring arms, and an elastomeric cover on the distal, free ends of the inwardly extending and diverging spring arms. The double face sealing device has application or use in all environments requiring a seal, but is particularly useful to seal openings or hatchways between compartments of spacecraft or aircraft.

  3. Nuclear instrumentation cable end seal

    DOEpatents

    Cannon, Collins P.; Brown, Donald P.

    1979-01-01

    An improved coaxial end seal for hermetically sealed nuclear instrumentation cable exhibiting an improved breakdown pulse noise characteristic under high voltage, high temperature conditions. A tubular insulator body has metallized interior and exterior surface portions which are braze sealed to a center conductor and an outer conductive sheath. The end surface of the insulator body which is directed toward the coaxial cable to which it is sealed has a recessed surface portion within which the braze seal material terminates.

  4. Earth boring bit with improved rigid face seal assembly

    SciTech Connect

    Burr, B.H.

    1987-05-19

    An earth boring bit is described with an improved pressure compensating face seal assembly having one rigid ring and sealing face carried by a bearing shaft and an opposed sealing face carried by the cutter. The bit comprises: a body; a cantilevered bearing shaft having a generally cylindrical journal bearing and positioned to extend obliquely inwardly and downwardly from the body; a cutter having a generally cylindrical bearing formed internally therein, secured for rotation about the journal bearing of the shaft; a lubrication system in the body, including a hydrostatic pressure compensator to lubricate the bearings; and a cutter seal groove formed near the outermost region of the cylindrical bearing in the cutter to have a circumferential, generally cylindrical wall.

  5. Experimental study on the sealing clearance between the labyrinth sealing displacer and cylinder in the 10 K G-M refrigerator

    NASA Astrophysics Data System (ADS)

    Hao, X. H.; Ju, Y. L.; Lu, Y. J.

    2011-05-01

    The labyrinth sealing displacer has been optimal designed to improve the operating stability and life-time of 10 K G-M refrigerator. The displacer was made of stainless steel 304 or inconel 718, coated with PTFE on its outer surface. Compared to the traditional piston-ring sealing displacer, the sealing clearance between the ridge of the labyrinth sealing displacer and cylinder is critical to the cooling performance of the G-M refrigerator. The displacers with different sealing clearances were experimentally studied, and the optimal clearance was given. The effects of the materials of the displacers and the system charge pressures on the performance of the labyrinth sealing were also tested and analyzed.

  6. Pressure Actuated Leaf Seals for Improved Turbine Shaft Sealing

    NASA Technical Reports Server (NTRS)

    Grondahl, Clayton

    2006-01-01

    This presentation introduces a shaft seal in which leaf seal elements are constructed from slotted shim material formed and layered into a frusto-conical assembly. Limited elastic deflection of seal leaves with increasing system pressure close large startup clearance to a small, non-contacting, steady state running clearance. At shutdown seal elements resiliently retract as differential seal pressure diminishes. Large seal clearance during startup and shutdown provides a mechanism for rub avoidance. Minimum operating clearance improves performance and non-contacting operation promises long seal life. Design features of this seal, sample calculations at differential pressures up to 2400 psid and benefit comparison with brush and labyrinth seals is documented in paper, AIAA 2005 3985, presented at the Advanced Seal Technology session of the Joint Propulsion Conference in Tucson this past July. In this presentation use of bimetallic leaf material will be discussed. Frictional heating of bimetallic leaf seals during a seal rub can relieve the rub condition to some extent with a change in seal shape. Improved leaf seal rub tolerance is expected with bimetallic material.

  7. Differences in Stylet Sheath Occurrence and the Fibrous Ring (Sclerenchyma) between xCitroncirus Plants Relatively Resistant or Susceptible to Adults of the Asian Citrus Psyllid Diaphorina citri (Hemiptera: Liviidae)

    PubMed Central

    Ammar, El-Desouky; Richardson, Matthew L.; Abdo, Zaid; Hall, David G.; Shatters, Robert G.

    2014-01-01

    The Asian citrus psyllid (ACP, Diaphorina citri, Hemiptera: Liviidae), is the principal vector of the phloem-limited bacteria strongly associated with huanglongbing (HLB), the world’s most serious disease of citrus. Host plant resistance may provide an environmentally safe and sustainable method of controlling ACP and/or HLB. Two xCitroncirus accessions (hybrids of Poncirus trifoliata and Citrus spp.), that are relatively resistant (UN-3881) or relatively susceptible (Troyer-1459) to ACP adults with regard to adult longevity, were compared in relation to ACP feeding behavior and some structural features of the leaf midrib. The settling (putative feeding/probing) sites of ACP adults on various parts of the leaf were not influenced primarily by plant accession. However, fewer ACP stylet sheaths were found in the midrib and fewer stylet sheath termini reached the vascular bundle (phloem and/or xylem) in UN-3881 compared to Troyer-1459 plants. Furthermore, in midribs of UN-3881 leaves the fibrous ring (sclerenchyma) around the phloem was significantly wider (thicker) compared to that in midribs of Troyer-1459 leaves. Our data indicate that feeding and/or probing by ACP adults into the vascular bundle is less frequent in the more resistant (UN-3881) than in the more susceptible (Troyer-1459) accessions. Our results also suggest that the thickness of the fibrous ring may be a barrier to stylet penetration into the vascular bundle, which is important for successful ACP feeding on the phloem and for transmitting HLB-associated bacteria. These results may help in the development of citrus plants resistant to ACP, which in turn could halt or slow the spread of the HLB-associated bacteria by this vector. PMID:25343712

  8. Differences in stylet sheath occurrence and the fibrous ring (sclerenchyma) between xCitroncirus plants relatively resistant or susceptible to adults of the Asian citrus psyllid Diaphorina citri (Hemiptera: Liviidae).

    PubMed

    Ammar, El-Desouky; Richardson, Matthew L; Abdo, Zaid; Hall, David G; Shatters, Robert G

    2014-01-01

    The Asian citrus psyllid (ACP, Diaphorina citri, Hemiptera: Liviidae), is the principal vector of the phloem-limited bacteria strongly associated with huanglongbing (HLB), the world's most serious disease of citrus. Host plant resistance may provide an environmentally safe and sustainable method of controlling ACP and/or HLB. Two xCitroncirus accessions (hybrids of Poncirus trifoliata and Citrus spp.), that are relatively resistant (UN-3881) or relatively susceptible (Troyer-1459) to ACP adults with regard to adult longevity, were compared in relation to ACP feeding behavior and some structural features of the leaf midrib. The settling (putative feeding/probing) sites of ACP adults on various parts of the leaf were not influenced primarily by plant accession. However, fewer ACP stylet sheaths were found in the midrib and fewer stylet sheath termini reached the vascular bundle (phloem and/or xylem) in UN-3881 compared to Troyer-1459 plants. Furthermore, in midribs of UN-3881 leaves the fibrous ring (sclerenchyma) around the phloem was significantly wider (thicker) compared to that in midribs of Troyer-1459 leaves. Our data indicate that feeding and/or probing by ACP adults into the vascular bundle is less frequent in the more resistant (UN-3881) than in the more susceptible (Troyer-1459) accessions. Our results also suggest that the thickness of the fibrous ring may be a barrier to stylet penetration into the vascular bundle, which is important for successful ACP feeding on the phloem and for transmitting HLB-associated bacteria. These results may help in the development of citrus plants resistant to ACP, which in turn could halt or slow the spread of the HLB-associated bacteria by this vector. PMID:25343712

  9. Turbopump Seal Testing at Marshall Space Flight Center

    NASA Technical Reports Server (NTRS)

    Gibson, Howard G.

    2010-01-01

    The new ARES space flight program has presented many challenges to aerospace engineers and designers. One of the areas for consideration are the seals in the turbopumps that supply cryogenic propellants to the combustion chamber in the upper stage. Heritage face seals that worked in the past might not be sufficient in the newer turbopumps with increased speeds, pressures across the seals, and loads. New seal materials, engineering designs, and analysis techniques have been developed since the early use of these heritage seals, however, rub conditions and surface degradation at the sliding contact cannot be reliably predicted. Testing is required to determine the safe operating limits and verify seal wear life over the operating range. Rocketdyne in Canoga Park California entered into a task agreement with MSFC to design, fabricate, build, test, disassemble, and inspect hardware after tests of carbon materials and wear resistant coatings. The purpose of testing would be to determine the safe operating limits, empirically iterate the design, and select the best combination of materials for face seals and mating rings. This paper summarizes the many hours and efforts of individuals and teams to get the program operating successfully and presents the test results that were obtained.

  10. Performance of Oil Pumping Rings: An Analytical and Experimental Study

    NASA Technical Reports Server (NTRS)

    Eusepi, M. W.; Walowit, J. A.; Pinkus, O.; Holmes, P.

    1986-01-01

    A steady-state design computer program was developed to predict the performance of pumping rings as functions of geometry, applied loading, speed, ring modulus, and fluid viscosity. Additional analyses were developed to predict transient behavior of the ring and the effects of temperature rises occurring in the hydrodynamic film between the ring and shaft. The analysis was initially compared with previous experimental data and then used to design additional rings for further testing. Tests were performed with Rulon, carbon-graphite, and babbit rings. The design analysis was used to size all of the rings and to select the ranges of clearances, thickness, and loading. Although full quantitative agreement was lacking, relative agreement existed in that rings that were predicted to perform well theoretically, generally performed well experimentally. Some causes for discrepanices between theory and experiment are believed to be due to starvation, leakage past the secondary seal at high pressures, and uncertainties in the small clearances and local inlet temperatures to the pumping ring. A separate preliminary analysis was performed for a pumping Leningrader seal. This anlaysis can be used to predict the film thickness and flow rate thr ough the seal as a function of pressure, speed, loading, and geometry.

  11. Shaft seal assembly and method

    NASA Technical Reports Server (NTRS)

    Keba, John E. (Inventor)

    2007-01-01

    A pressure-actuated shaft seal assembly and associated method for controlling the flow of fluid adjacent a rotatable shaft are provided. The seal assembly includes one or more seal members that can be adjusted between open and closed positions, for example, according to the rotational speed of the shaft. For example, the seal member can be configured to be adjusted according to a radial pressure differential in a fluid that varies with the rotational speed of the shaft. In addition, in the closed position, each seal member can contact a rotatable member connected to the shaft to form a seal with the rotatable member and prevent fluid from flowing through the assembly. Thus, the seal can be closed at low speeds of operation and opened at high speeds of operation, thereby reducing the heat and wear in the seal assembly while maintaining a sufficient seal during all speeds of operation.

  12. Storage Rings

    SciTech Connect

    Fischer, W.

    2011-01-01

    Storage rings are circular machines that store particle beams at a constant energy. Beams are stored in rings without acceleration for a number of reasons (Tab. 1). Storage rings are used in high-energy, nuclear, atomic, and molecular physics, as well as for experiments in chemistry, material and life sciences. Parameters for storage rings such as particle species, energy, beam intensity, beam size, and store time vary widely depending on the application. The beam must be injected into a storage ring but may not be extracted (Fig. 1). Accelerator rings such as synchrotrons are used as storage rings before and after acceleration. Particles stored in rings include electrons and positrons; muons; protons and anti-protons; neutrons; light and heavy, positive and negative, atomic ions of various charge states; molecular and cluster ions, and neutral polar molecules. Spin polarized beams of electrons, positrons, and protons were stored. The kinetic energy of the stored particles ranges from 10{sup -6} eV to 3.5 x 10{sup 12} eV (LHC, 7 x 10{sup 12} eV planned), the number of stored particles from one (ESR) to 1015 (ISR). To store beam in rings requires bending (dipoles) and transverse focusing (quadrupoles). Higher order multipoles are used to correct chromatic aberrations, to suppress instabilities, and to compensate for nonlinear field errors of dipoles and quadrupoles. Magnetic multipole functions can be combined in magnets. Beams are stored bunched with radio frequency systems, and unbunched. The magnetic lattice and radio frequency system are designed to ensure the stability of transverse and longitudinal motion. New technologies allow for better storage rings. With strong focusing the beam pipe dimensions became much smaller than previously possible. For a given circumference superconducting magnets make higher energies possible, and superconducting radio frequency systems allow for efficient replenishment of synchrotron radiation losses of large current electron or

  13. Study on a new type of sealing - regeneration-labyrinth sealing for displacer in cryocoolers: Part II - Experimental study

    NASA Astrophysics Data System (ADS)

    Liu, L. Q.; Zhang, L.

    2000-02-01

    The regeneration-labyrinth sealing has been employed in the G-M refrigerator first with the cold regenerator outside the displacer. Sealing effects of the new structure, the sealing rings with opening, and the ones without opening have been compared. The performance of the cryocooler with these three sealing structures has also been contrasted. At the same time, influences of the displacer-cylinder gap and regenerative capacity of displacers on the performance of the cryocooler have been researched experimentally. The regeneration-labyrinth sealing is used in the G-M refrigerator with the cold regenerator inside the displacer (general structure) consequently. Influences of some parameters of the new type of sealing on the performance of the refrigerator were studied experimentally. The results of experiments illustrate that the cooling temperature of the second stage of the G-M refrigerator reaches 3.70 K, which marks the success of applying the regeneration-labyrinth sealing to the G-M refrigerator.

  14. A study of metal concentrations and metallothionein binding capacity in liver, kidney and brain tissues of three Arctic seal species.

    PubMed

    Sonne, Christian; Aspholm, Ole; Dietz, Rune; Andersen, Steen; Berntssen, Marc H G; Hylland, Ketil

    2009-12-01

    Arctic seals are known to accumulate relatively high concentrations of potential toxic heavy metals in their vital organs, such as livers and kidneys, as well as in their central nervous system. We therefore decided to determine whether mercury, copper, cadmium and zinc levels in liver, kidney and brain tissues of three Arctic seal species were associated with the intracellular metal-binding protein metallothionein (MT) as a sign of toxic exposure. Samples from four ringed (Phoca hispida), five harp (P.groenlandica) and five hooded (Cystophora cristata) seals taken during field trips to Central West Greenland (Godhavn) and the Barents Sea in the spring of 1999 were used for the present study. In all three seal species concentrations of mercury, zinc and copper were highest in the liver, except for cadmium which was highest in the kidneys. Metal concentrations increased significantly in the order: ringed sealsealseal for both kidney and liver tissues. MT concentrations were highest in the kidneys and the concentrations increased in the order: ringed sealsealseal. MT metal-binding capacity was highest in the kidneys for all three species and increased in the same order: ringed seals (2-10%)seals (8-15%)seals (27-63%). We therefore suggest that there are species-specific differences in the sub-cellular handling of heavy metals which indicate differences in sensitivity and health implications. However, a larger sample size is needed in order to test the relationship between metal concentrations and MT up-regulation in order to decide which metals are the most important and to elucidate whether the MT binding capacity is sufficient to protect tissues (i.e. kidney) from metal toxicosis. MT with its binding capacity could be a useful marker for environmental exposure to metals and their potential toxicity in the Arctic. PMID:19773017

  15. Brush seals for cryogenic applications

    NASA Astrophysics Data System (ADS)

    Proctor, Margaret P.

    1993-11-01

    Brush seals are compliant, contacting seals and have significantly lower leakage than labyrinth seals in gas turbine applications. Their characteristics of long life and low leakage make them candidates for use in rocket engine turbopumps. Two-inch diameter brush seals with a nominal 0.005 inch radial interference were tested in liquid nitrogen at shaft speeds up to 35,000 rpm and pressure drops up to 175 psid per seal. A labyrinth seal was also tested to provide a baseline. Performance, staging effects, and wear results are presented.

  16. Seal system with integral detector

    DOEpatents

    Fiarman, Sidney

    1985-01-01

    There is disclosed a seal system for materials where security is of the essence, such as nuclear materials, which is tamper-indicating, which indicates changes in environmental conditions that evidence attempts to by-pass the seal, which is unique and cost effective, said seal system comprised of a seal where an optical signal is transmitted through a loop, with a detector to read said signal, and one or more additional detectors designed to detect environmental changes, these detectors being operatively associated with the seal so that detection of a break in the optical signal or detection of environmental changes will cause an observable change in the seal.

  17. Brush seals for cryogenic applications

    NASA Technical Reports Server (NTRS)

    Proctor, Margaret P.

    1993-01-01

    Brush seals are compliant, contacting seals and have significantly lower leakage than labyrinth seals in gas turbine applications. Their characteristics of long life and low leakage make them candidates for use in rocket engine turbopumps. Two-inch diameter brush seals with a nominal 0.005 inch radial interference were tested in liquid nitrogen at shaft speeds up to 35,000 rpm and pressure drops up to 175 psid per seal. A labyrinth seal was also tested to provide a baseline. Performance, staging effects, and wear results are presented.

  18. Design guide for helicopter transmission seals

    NASA Technical Reports Server (NTRS)

    Hayden, T. S.; Keller, C. H., Jr.

    1974-01-01

    A detailed approach for the selection and design of seals for helicopter transmissions is presented. There are two major types of seals presently being used and they are lip type seals and mechanical type seals. Lip type seals can be divided in conventional lip seals and hydrodynamic lip seals. Conventional lip seals can be used for slow-speed, low-pressure, low-temperature sealing. Hydrodynamic lip seals although they are as pressure and temperature limited as conventional lip seals, can operate at a higher speed. Mechanical types seals are comprised of face seals and circumferential seals. Face seals are capable of high speed, high pressure, and high temperature. Circumferential seals can be used in high-speed and high-temperature applications, but will leak excessively at moderate pressures. The performance goals of transmission seals are a life that is at least equal to the scheduled overhaul interval of the gearbox component and a leakage rate of near zero.

  19. Morbilliviral dermatitis in seals.

    PubMed

    Lipscomb, T P; Mense, M G; Habecker, P L; Taubenberger, J K; Schoelkopf, R

    2001-11-01

    A juvenile female hooded seal (Cystophora cristata) and a juvenile male harp seal (Phoca groenlandica) stranded separately on the New Jersey (USA) coast and were taken to a marine mammal rehabilitation center. Both were lethargic and emaciated, had dermatitis, and died. Histologic skin lesions in the seals were similar and consisted of epidermal and follicular epithelial hyperplasia, hyperkeratosis, degeneration, and necrosis. The most distinctive finding was extensive syncytial zones bounded superficially by hyperkeratosis and deeply by hyperplastic basal cells. Eosinophilic intracytoplasmic inclusion bodies were present in epithelial cells. Morbilliviral antigen was demonstrated in the skin lesions by immunohistochemistry. Phocine distemper virus was detected in the skin by reverse transcription polymerase chain reaction and a phocine distemper virus-specific probe using the Southern blot technique. This is the first report of morbilliviral dermatitis in marine mammals. PMID:11732810

  20. Giardia and Cryptosporidium in harp and hooded seals from the Gulf of St. Lawrence, Canada.

    PubMed

    Appelbee, A J; Thompson, R C A; Measures, L M; Olson, M E

    2010-10-11

    Giardia and Cryptosporidium are protozoan parasites known to cause enteric disease in terrestrial wildlife species (mammals, reptiles and birds). Few surveys for Giardia and Cryptosporidium in marine wildlife species, such as pinnipeds, have been reported. The objective of this study was to determine the prevalence and genotype of Giardia and Cryptosporidium in two species of pinnipeds, harp seal (Phoca groenlandica) and hooded seal (Cystophora cristata), from the Gulf of St. Lawrence, Canada. Faecal samples were collected from pup and adult seals and examined for the presence of cysts of Giardia and oocysts of Cryptosporidium using microscopy and immunofluorescent staining. Tissues from the small intestine of adult seals were also collected and examined for infections using the polymerase chain reaction (PCR) technique. Giardia cysts were found in the faeces of 42% (16/38) of adult harp seals, but in none of the harp seal pups (0/20). Although Giardia cysts were not detected in faeces of adult hooded seals (0/10) using microscopy, 80% tested positive for Giardia using PCR of intestinal tissue indicative of a true replicating infection. Both harp and hooded seals harboured infections with the zoonotic strain, Giardia duodenalis Assemblage A, as determined using a nested-PCR technique to amplify a small subunit ribosomal (SSU-rRNA) gene of Giardia. Cryptosporidium was not detected by microscopy, nor using the PCR technique on intestinal tissues from any of the 68 seals examined. PMID:20594649

  1. Ring Galaxies

    NASA Astrophysics Data System (ADS)

    Dennefeld, M.; Materne, J.

    1980-09-01

    Among the 338 exotic, intriguing and/or fascinating objects contained in Arp's catalogue of peculiar galaxies, two, Arp 146 and 147, are calling special attention as a presumably separate class of objects displaying closed rings with almost empty interior. It is difficult to find out when, historically speaking, attention was called first to this type of object as a peculiar class, but certainly ga1axies with rings were widely found and recognized in the early sixties, ul}der others by Vorontsov-Velyaminov (1960), Sandage (1961) in the Hubble Atlas or de Vaucouleurs (1964) in the first reference catalogue of ga1axies. The most recent estimates by Arp and Madore (1977) from a search on about 200 Schmidt plates covering 7,000 square degrees give 3.6 per cent of ring galaxies among 2,784 peculiar galaxies found. However, despite the mythological perfection associated with a circle, some ordering is necessary before trying to understand the nature of such objects. This is particularly true because a large fraction of those galaxies with rings are probably normal spiral galaxies of type RS or S(r) as defined by de Vaucouleurs, where the spiral arms are simply "closing the circle". A good example of such "ordinary" galaxy is NGC 3081 in the Hubble Atlas .

  2. Method of sealing

    DOEpatents

    Groh, Edward F.; Cassidy, Dale A.

    1978-01-01

    A thermocouple lead or other small diameter wire, cable or tube is passed through a thin material such as sheet metal and sealed thereinto by drawing complementary longitudinally angled, laterally rounded grooves terminating at their base ends in a common plane in both sides of the thin material with shearing occuring at the deep end faces thereof to form a rounded opening in the thin material substantially perpendicular to the plane of the thin material, passing a thermocouple lead or similar object through the opening so formed and sealing the opening with a sealant which simultaneously bonds the lead to the thin material.

  3. Emerging Sealing Technologies Development

    NASA Technical Reports Server (NTRS)

    2005-01-01

    Under this Cooperative Agreement, the objective was to investigate several emerging sealing technologies of interest to the Mechanical Components Branch of National Aeronautics and Space Administration Glenn Research Center at Lewis Field (NASA GRC). The majority of the work conducted was to support the development of Solid Oxide Fuel Cells for application to aeronautic auxiliary power units, though technical investigations of interest to other groups and projects were also conducted. In general, accomplishments and results were periodically reported to the NASA Technical Monitor, the NASA GRC Seal Team staff, and NASA GRC project management. Several technical reports, journal articles, and presentations were given internally to NASA GRC and to the external public.

  4. Dye filled security seal

    DOEpatents

    Wilson, Dennis C. W.

    1982-04-27

    A security seal for providing an indication of unauthorized access to a sealed object includes an elongate member to be entwined in the object such that access is denied unless the member is removed. The elongate member has a hollow, pressurizable chamber extending throughout its length that is filled with a permanent dye under greater than atmospheric pressure. Attempts to cut the member and weld it together are revealed when dye flows through a rupture in the chamber wall and stains the outside surface of the member.

  5. REACTOR COOLANT TUBE SEAL

    DOEpatents

    Morris, W.J.

    1958-12-01

    A plle-flattenlng control element and a fluid seal therefore to permit movement of the element into a liquld contnining region of a neutronlc reactor are described. The device consists of flattened, thin-walled aluminum tubing contalnlng a uniform mixture of thermal neutron absorbing material, and a number of soft rubber closures for the process tubes, having silts capable of passing the flattened elements therethrough, but effectively sealing the process tubes against fluld leaknge by compression of the rubber. The flattened tubing is sufficiently flexible to enable it to conform to the configuratlon of the annular spacing surrounding the fuel elements ln the process tubes.

  6. Corneal seal device

    NASA Technical Reports Server (NTRS)

    Baehr, E. F. (Inventor)

    1977-01-01

    A corneal seal device is provided which, when placed in an incision in the eye, permits the insertion of a surgical tool or instrument through the device into the eye. The device includes a seal chamber which opens into a tube which is adapted to be sutured to the eye and serves as an entry passage for a tool. A sealable aperture in the chamber permits passage of the tool through the chamber into the tube and hence into the eye. The chamber includes inlet ports adapted to be connected to a regulated source of irrigation fluid which provides a safe intraocular pressure.

  7. Rotating Intershaft Brush Seal Project

    NASA Technical Reports Server (NTRS)

    Krawiecki, Stephen; Mehta, Jayesh; Holloway, Gary

    2006-01-01

    The pursuit of high Mach number flight presents several challenges to the airframe and engine design engineers. Most obvious is the resulting high temperatures encountered as the aircraft approaches Mach 3 and above. The encountered high temperatures and shaft speeds of engines require rethinking in the areas of material selections, component design and component operating life. In the area of sump compartment sealing, one of the most difficult sealing applications is the sealing of an engine s rear sump. Normally this sump will need some method of sealing between two rotating shafts. This sealing operation is done with an intershaft seal. The aft sump region also presents an additional design requirement for the intershaft seal. This region has to absorb the engine s thermal growth, which means that in the seal area, axial movement, on the order of 0.30 in., between the rotating shafts must be tolerated. A new concept or new technology of sealing an intershaft sump configuration is being developed. This concept, called a rotating intershaft brush seal has key attributes that will allow this seal to perform better, in the demanding environment of sealing an aft sump with two rotating shafts, when compared to today s sealing technology of labyrinth and carbon sea

  8. Measurement of rod seal lubrication for Stirling engine

    NASA Technical Reports Server (NTRS)

    Krauter, A. I.

    1980-01-01

    The elastohydrodynamic behavior of sliding elastomeric seals for the Stirling engine, was analyzed using an experimental apparatus to determine the instantaneous oil film thickness throughout the cyclic reciprocating motion. Tests were conducted on two commercial elastomeric seals: a "T" seal (76 mm O.D. and 3.8 mm between backing rings) and an "O" ring (76 mm O.D. and 5.3 mm diameter). Testing conditions included seal durometers of 70 and 90, sliding velocities of 0.8, 2.0, and 3.6 m/s, and no pressure gradient across the seal. Both acrylic and aluminum cylinders were used. Measured oil film thickness profiles were compared to results of the elastohydrodynamic analysis. The comparison shows an overall qualitative agreement. Friction and oil leakage measurements were also made at these sliding speeds. The fluid used was a typical synthetic base automotive lubricant. It is concluded that this first time experimental analytical comparison for oil film thickness indicates the need for some improvements in the analytical model and in the experimental technique.

  9. Comparison of effects of ProSeal LMA™ laryngeal mask airway cuff inflation with air, oxygen, air:oxygen mixture and oxygen:nitrous oxide mixture in adults: A randomised, double-blind study

    PubMed Central

    Sharma, Mona; Sinha, Renu; Trikha, Anjan; Ramachandran, Rashmi; Chandralekha, C

    2016-01-01

    Background and Aims: Laryngeal mask airway (LMA) cuff pressure increases when the air is used for the cuff inflation during oxygen: nitrous oxide (O2:N2O) anaesthesia, which may lead to various problems. We compared the effects of different gases for ProSeal LMA™ (PLMA) cuff inflation in adult patients for various parameters. Methods: A total of 120 patients were randomly allocated to four groups, according to composition of gases used to inflate the PLMA cuff to achieve 40 cmH2 O cuff pressure, air (Group A), 50% O2 :air (Group OA), 50% O2:N2O (Group ON) and 100% O2 (Group O). Cuff pressure, cuff volume and ventilator parameters were monitored intraoperatively. Pharyngolaryngeal parameters were assessed at 1, 2 and 24 h postoperatively. Statistical analysis was performed using ANOVA, Fisher's exact test and step-wise logistic regression. Results: Cuff pressure significantly increased at 10, 15 and 30 min in Group A, OA and O from initial pressure. Cuff pressure decreased at 5 min in Group ON (36.6 ± 3.5 cmH2 O) (P = 0.42). PLMA cuff volume increased in Group A, OA, O, but decreased in Group ON (6.16 ± 2.8 ml [P < 0.001], 4.7 ± 3.8 ml [P < 0.001], 1.4 ± 3.19 ml [P = 0.023] and − 1.7 ± 4.9 ml [P = 0.064], respectively), from basal levels. Ventilatory parameters were comparable in all four groups. There was no significant association between sore throat and cuff pressure, with odds ratio 1.002. Conclusion: Cuff inflation with 50% O2:N2O mixture provided more stable cuff pressure in comparison to air, O2 :air, 100% O2 during O2:N2O anaesthesia. Ventilatory parameters did not change with variation in PLMA cuff pressure. Post-operative sore throat had no correlation with cuff pressure. PMID:27601739

  10. Vacuum encapsulated hermetically sealed diamond amplified cathode capsule and method for making same

    SciTech Connect

    Rao, Triveni; Walsh, John; Gangone, Elizabeth

    2014-12-30

    A vacuum encapsulated, hermetically sealed cathode capsule for generating an electron beam of secondary electrons, which generally includes a cathode element having a primary emission surface adapted to emit primary electrons, an annular insulating spacer, a diamond window element comprising a diamond material and having a secondary emission surface adapted to emit secondary electrons in response to primary electrons impinging on the diamond window element, a first cold-weld ring disposed between the cathode element and the annular insulating spacer and a second cold-weld ring disposed between the annular insulating spacer and the diamond window element. The cathode capsule is formed by a vacuum cold-weld process such that the first cold-weld ring forms a hermetical seal between the cathode element and the annular insulating spacer and the second cold-weld ring forms a hermetical seal between the annular spacer and the diamond window element whereby a vacuum encapsulated chamber is formed within the capsule.

  11. Direct seal papers for horizontal form-fill-seal machine.

    PubMed

    Merritt, John

    2002-01-01

    Direct-seal papers are designed for minimal fibre lift, where the sealing layer is incorporated into the bottom web. There are applications where they are the most appropriate economical alternative to traditional coated papers for horizontal form-fill-seal packaging. This article explores their benefits and limitations. PMID:11921779

  12. Feather seal slot for vanes

    SciTech Connect

    Del Mastro, B. P.; Eckart, F.

    1985-10-22

    The slots for accommodating feather seals in the turbine vanes of a gas turbine engine has the end thereof sealed off by use of weld wire inserted into the slot and simultaneously welded and cut to the required length.

  13. Analysis Of Stepped Labyrinth Seals

    NASA Technical Reports Server (NTRS)

    Scharrer, Joseph K.

    1990-01-01

    Report presents analysis of compressible flow in stepped labyrinth gas seal in turbomachine. Part of continuing effort to understand and suppress self-excited vibrations caused by stepped labyrinth seals. Rotordynamic coefficients derived for compressible flow.

  14. Static seal for turbine engine

    SciTech Connect

    Salazar, Santiago; Gisch, Andrew

    2014-04-01

    A seal structure for a gas turbine engine, the seal structure including first and second components located adjacent to each other and forming a barrier between high and low pressure zones. A seal cavity is defined in the first and second components, the seal cavity extending to either side of an elongated gap extending generally in a first direction between the first and second components. A seal member is positioned within the seal cavity and spans across the elongated gap. The seal member includes first and second side edges extending into each of the components in a second direction transverse to the first direction, and opposing longitudinal edges extending between the side edges generally parallel to the first direction. The side edges include a groove formed therein for effecting a reduction of gas flow around the seal member at the side edges.

  15. Seal For Precooling A Turbopump

    NASA Technical Reports Server (NTRS)

    Owen, Samuel S.; Mulready, R.C.

    1988-01-01

    Diaphragm reduces misalignment. Rotary seal retains precooling fluid in pump section of cryogenic turbopump, preventing fluid from entering turbine section. Precooling fluid held in pump section of turbopump by knife-edge labyrinth seal on diaphragm.

  16. Development of circumferential seal for helicopter transmissions: Results of bench and flight tests

    NASA Technical Reports Server (NTRS)

    Strom, T. N.; Ludwig, L. P.

    1975-01-01

    A modified circumferential segmented ring seal was designed for direct replacement of a helicopter transmission elastomeric lip seal operating on a shaft diameter of 13.91 centimeters (5.481 in.) at sliding velocities to 52.48 m/sec (10 330 ft/min). The modifications involved the garter spring tension, shaft roundness, seal housing flatness, and pumping grooves to inhibit leakage. Operation of the seals in bench tests under simulated helicopter transmission conditions revealed that the seal leakage rate was within acceptable limits and that the wear rate was negligible. The low leakage and wear rates were confirmed in flight tests of 600 and 175 hours (sliding speed, 48.11 m/sec (9470 ft/min)). An additional 200 hours of air worthiness qualification testing (aircraft tie down) demonstrated that the seal can operate at the advanced sliding conditions of 52.48 m/sec (10 330 ft/min).

  17. Improved seal for geothermal drill bit. Final technical report

    SciTech Connect

    Evans, R.F.

    1984-07-06

    Each of the two field test bits showed some promise though their performances were less than commercially acceptable. The Ohio test bit ran just over 3000 feet where about 4000 is considered a good run but it was noted that a Varel bit of the same type having a standard O ring seal was completely worn out after 8-1/2 hours (1750 feet drilled). The Texas test bit had good seal-bearing life but was the wrong cutting structure type for the formation being drilled and the penetration rate was low.

  18. Finger Seal: A Novel Approach to Air to Air Sealing

    NASA Technical Reports Server (NTRS)

    Arora, Gul; Steinetz, Bruce; Proctor, Margaret

    2006-01-01

    The gas turbine industry used a variety of sealing mechanisms to contain and direct secondary flows into and around components for cooling, and to limit leakage into and from bearing and disk cavities. The function of these seals is very important to the component efficiencies and attendant engine performance. Most of these seals are labyrinth seals, which are high-leakage seals that are costly to manufacture. In recent years, brush seals have been introduced which have demonstrated significantly reduced leakage, although they are still expensive and have exhibited wear and hysteresis difficulties. A new innovative concept called finger seal, patented by AlliedSignal, has demonstrated leakage similar to brush seals and is cheaper. The finger seal is comprised of a stack of precision photo-etched sheet metal elements, which allows intricate features to be made at very low cost and with the potential to resist wear and provide the compliance necessary to accomodate rotor excursions. Initial testing in the high-speed/high-temperature seal test facility, at the NASA Lewis Research Center, has corroborated the finger seal performance. The testing also revealed hysteresis problems with the current design. A NASA funded research project is in progress to correct the functional deficiencies of the finger seal and to refine its features to provide sufficient seal life for commercial transport engines and other long-life applications. This research will benefit the aeronautical gas turbine industry as a whole in terms of fuel consumption, operational characteristics, and cost. The first phase of this research to reduce finger seal hysteresis has been in progress for the last one year. This paper presents the results of this research to date. In future the research program will address seal performance, manufacturing, cost and life issues. The research program is expected to be completed by December 1998.

  19. "The Seventh Seal."

    ERIC Educational Resources Information Center

    Palmer, Peter M.

    1969-01-01

    The significance of Bergman's "Seventh Seal" lies not in the speeches nor in the actions of the central characters but rather in the film's form, its totality created by the emotive elements of imagery and sound together with the intellectual elements of actions and words. The scene-units are related to a central motif (the opening of the seventh…

  20. Keepers of the Seals.

    ERIC Educational Resources Information Center

    Momatiuk, Yva; Eastcott, John

    1998-01-01

    The Pribilof Islands Stewardship Program aims to preserve the rich species diversity of the islands and recover the sense of connectedness that once linked local Aleuts and their environment. The summer program draws on both science and traditional knowledge, offering Aleut youth the chance to assist scientists, protect the seals, and participate…

  1. Sealing an ultracapacitor

    DOEpatents

    Irwin, Patricia Chapman; Feist, Thomas Paul

    2001-10-16

    An ultracapacitor comprises at least one cell comprising two solid, nonporous current collectors, two porous electrodes separating the current collectors, a porous separator between the electrodes and an electrolyte occupying pores in the electrodes and separator. The cell is sealed with a reclosable hermetic closure.

  2. Turbine engine interstage seal

    SciTech Connect

    Clevenger, L.L.

    1993-08-10

    A seal structure is described for a turbine engine, the turbine engine including a housing surrounding a centrifugal compressor having a rotor, and a radial inflow turbine including a turbine rotor, the compressor rotor and the turbine rotor being disposed in back-to-back relation, the turbine rotor being drivingly connected with the compressor rotor and axially spaced therefrom to define an annular gap there between, the gap radially bounded at its outer periphery by the housing and at its inner periphery by an annular surface intermediate the compressor rotor and the turbine rotor an annular sealing member disposed in the gap to control air flow from the compressor toward the turbine; the annular sealing member the first axial direction, and a third annular wall portion joining with the second annular wall portion and extending inward therefrom towards the surface intermediate the compressor rotor and the turbine rotor, and biasing means cooperating with the housing for urging the seal structure toward the turbine rotor.

  3. Damping seal for turbomachinery

    NASA Technical Reports Server (NTRS)

    Vonpragenau, G. L. (Inventor)

    1985-01-01

    A damping seal between a high speed rotor member and stator member that separates pressurized fluid compartments is described. It is characterized by the rotor member having a smooth outer surface and the stator member having its bore surface roughened by a plurality of pockets or depressions.

  4. Piston rod seal

    DOEpatents

    Lindskoug, Stefan

    1984-01-01

    In a piston rod seal of the type comprising a gland through which the piston rod is passed the piston is provided with a sleeve surrounding the piston rod and extending axially so as to axially partly overlap the gland when the piston is in its bottom dead center position.

  5. GOLD PRESSURE VESSEL SEAL

    DOEpatents

    Smith, A.E.

    1963-11-26

    An improved seal between the piston and die member of a piston-cylinder type pressure vessel is presented. A layer of gold, of sufficient thickness to provide an interference fit between the piston and die member, is plated on the contacting surface of at least one of the members. (AEC)

  6. Ceramic to metal seal

    DOEpatents

    Snow, Gary S.; Wilcox, Paul D.

    1976-01-01

    Providing a high strength, hermetic ceramic to metal seal by essentially heating a wire-like metal gasket and a ceramic member, which have been chemically cleaned, while simultaneously deforming from about 50 to 95 percent the metal gasket against the ceramic member at a temperature of about 30 to 75 percent of the melting temperature of the metal gasket.

  7. Ultrasonic dip seal maintenance system

    DOEpatents

    Poindexter, Allan M.; Ricks, Herbert E.

    1978-01-01

    A system for removing impurities from the surfaces of liquid dip seals and or wetting the metal surfaces of liquid dip seals in nuclear components. The system comprises an ultrasonic transducer that transmits ultrasonic vibrations along an ultrasonic probe to the metal and liquid surfaces of the dip seal thereby loosening and removing those impurities.

  8. Seal for sodium sulfur battery

    DOEpatents

    Topouzian, Armenag; Minck, Robert W.; Williams, William J.

    1980-01-01

    This invention is directed to a seal for a sodium sulfur battery in which the sealing is accomplished by a radial compression seal made on a ceramic component of the battery which separates an anode compartment from a cathode compartment of the battery.

  9. Aspirating Seal Development: Analytical Modeling and Seal Test Rig

    NASA Technical Reports Server (NTRS)

    Bagepalli, Bharat

    1996-01-01

    This effort is to develop large diameter (22 - 36 inch) Aspirating Seals for application in aircraft engines. Stein Seal Co. will be fabricating the 36-inch seal(s) for testing. GE's task is to establish a thorough understanding of the operation of Aspirating Seals through analytical modeling and full-scale testing. The two primary objectives of this project are to develop the analytical models of the aspirating seal system, to upgrade using GE's funds, GE's 50-inch seal test rig for testing the Aspirating Seal (back-to-back with a corresponding brush seal), test the aspirating seal(s) for seal closure, tracking and maneuver transients (tilt) at operating pressures and temperatures, and validate the analytical model. The objective of the analytical model development is to evaluate the transient and steady-state dynamic performance characteristics of the seal designed by Stein. The transient dynamic model uses a multi-body system approach: the Stator, Seal face and the rotor are treated as individual bodies with relative degrees of freedom. Initially, the thirty-six springs are represented as a single one trying to keep open the aspirating face. Stops (Contact elements) are provided between the stator and the seal (to compensate the preload in the fully-open position) and between the rotor face and Seal face (to detect rub). The secondary seal is considered as part of the stator. The film's load, damping and stiffness characteristics as functions of pressure and clearance are evaluated using a separate (NASA) code GFACE. Initially, a laminar flow theory is used. Special two-dimensional interpolation routines are written to establish exact film load and damping values at each integration time step. Additionally, other user-routines are written to read-in actual pressure, rpm, stator-growth and rotor growth data and, later, to transfer these as appropriate loads/motions in the system-dynamic model. The transient dynamic model evaluates the various motions, clearances

  10. An Advanced Helium Buffer Seal for the SSME, ATD Oxygen Pump

    NASA Technical Reports Server (NTRS)

    Shapiro, Wilbur

    2006-01-01

    The present configuration of Helium Buffer Seal on the ATD oxygen pump consists of a pair of opposed carbon rings are forced axially against their containment housings. Leakage occurs through the clearance between the rings and the shaft. The total helium leakage through both sides is approximately 239 SCFM. A reduction in leakage to 50 SCFM will result in less helium storage and consequently permit a substantial increase in payload. Under Phase 1 NASA SBIR, a solid T-Ring seal was analyzed and designed that could satisfy the criteria of reducing leakage to 50 SCFM or less. The design makes maximum use of available length and employs a mid length row of hydrostatic orifaces that feed buffer helium directly into a 2 to 3 mil clearance region. The flow splits into opposite paths to buffer oxygen gas on one side and hydrogen gas on the turbine side. The seal employs opposed hydrostatic tapered land secondary seals that provide friction free support of the primary seal and allows the primary seal to follow rotor excursion and maintain concentric operating clearance . The predicted performance of the T-seal is excellent with operation at a safe film thickness of 2 to 2.5 mils and leakage less than 50 SCFM.

  11. Thruster sealing system and apparatus

    NASA Technical Reports Server (NTRS)

    Svejkovsky, Paul A. (Inventor)

    1992-01-01

    A thruster nozzle sealing system and apparatus is provided for protection of spacecraft thruster motors. The system includes a sealing plug, a sealing plug insertion tool, an outer cover, an outer cover attachment, and a ferry flight attachment. The sealing plug prevents moisture from entering the thruster engine so as to prevent valve failure. The attachments are interchangeably connectable with the sealing plug. The ferry flight attachment is used during air transportation of the spacecraft, and the outer cover attachment is used during storage and service of the spacecraft. The outer cover provides protection to the thruster nozzle from mechanical damage.

  12. Refrigeration system with clearance seals

    SciTech Connect

    Holland, N. J.

    1985-02-26

    In a refrigeration system such as a split Stirling system, fluid seals associated with the reciprocating displacer are virtually dragless clearance seals. Movement of the displacer relative to the pressure variations in the working volume of gas is retarded by a discrete braking element. Because it is not necessary that the brake providing any sealing action, the brake can be designed for greater durability and less dependence on ambient and operating temperatures. Similarly, the clearance seal can be formed of elements having low thermal expansion such that the seal is not temperature dependent. In the primary embodiments the braking element is a split friction brake.

  13. Thruster sealing system and apparatus

    NASA Astrophysics Data System (ADS)

    Svejkovsky, Paul A.

    1992-11-01

    A thruster nozzle sealing system and apparatus is provided for protection of spacecraft thruster motors. The system includes a sealing plug, a sealing plug insertion tool, an outer cover, an outer cover attachment, and a ferry flight attachment. The sealing plug prevents moisture from entering the thruster engine so as to prevent valve failure. The attachments are interchangeably connectable with the sealing plug. The ferry flight attachment is used during air transportation of the spacecraft, and the outer cover attachment is used during storage and service of the spacecraft. The outer cover provides protection to the thruster nozzle from mechanical damage.

  14. Hermetic Seal Leak Detection Apparatus

    NASA Technical Reports Server (NTRS)

    Kelley, Anthony R. (Inventor)

    2013-01-01

    The present invention is a hermetic seal leak detection apparatus, which can be used to test for hermetic seal leaks in instruments and containers. A vacuum tight chamber is created around the unit being tested to minimize gas space outside of the hermetic seal. A vacuum inducing device is then used to increase the gas chamber volume inside the device, so that a slight vacuum is pulled on the unit being tested. The pressure in the unit being tested will stabilize. If the stabilized pressure reads close to a known good seal calibration, there is not a leak in the seal. If the stabilized pressure reads closer to a known bad seal calibration value, there is a leak in the seal. The speed of the plunger can be varied and by evaluating the resulting pressure change rates and final values, the leak rate/size can be accurately calculated.

  15. Brush seals for cryogenic applications

    NASA Astrophysics Data System (ADS)

    Proctor, Margaret P.

    1994-07-01

    This viewgraph presentation presents test results of brush seals for cryogenic applications. Leakage for a single brush seal was two to three times less than for a 12-tooth labyrinth seal. The maximum temperature rise for a single brush seal was less than 50 R and occurred at 25 psid across the seal and 35,000 rpm. A static blowout test demonstrated sealing capability up to 550 psid. The seal limit was not obtained. The power loss for a single brush at 35,000 rpm and 175 psid was 2.45 hp. Two brushes far apart leak less than two brushes tight packed. Rotor wear was approximately 0.00075 mils and bristle wear was 1-3 mils after 4-1/2 hours.

  16. Regenerator cross arm seal assembly

    DOEpatents

    Jackman, Anthony V.

    1988-01-01

    A seal assembly for disposition between a cross arm on a gas turbine engine block and a regenerator disc, the seal assembly including a platform coextensive with the cross arm, a seal and wear layer sealingly and slidingly engaging the regenerator disc, a porous and compliant support layer between the platform and the seal and wear layer porous enough to permit flow of cooling air therethrough and compliant to accommodate relative thermal growth and distortion, a dike between the seal and wear layer and the platform for preventing cross flow through the support layer between engine exhaust and pressurized air passages, and air diversion passages for directing unregenerated pressurized air through the support layer to cool the seal and wear layer and then back into the flow of regenerated pressurized air.

  17. Advanced High Temperature Structural Seals

    NASA Technical Reports Server (NTRS)

    Newquist, Charles W.; Verzemnieks, Juris; Keller, Peter C.; Shorey, Mark W.; Steinetz, Bruce (Technical Monitor)

    2000-01-01

    This program addresses the development of high temperature structural seals for control surfaces for a new generation of small reusable launch vehicles. Successful development will contribute significantly to the mission goal of reducing launch cost for small, 200 to 300 lb payloads. Development of high temperature seals is mission enabling. For instance, ineffective control surface seals can result in high temperature (3100 F) flows in the elevon area exceeding structural material limits. Longer sealing life will allow use for many missions before replacement, contributing to the reduction of hardware, operation and launch costs. During the first phase of this program the existing launch vehicle control surface sealing concepts were reviewed, the aerothermal environment for a high temperature seal design was analyzed and a mock up of an arc-jet test fixture for evaluating seal concepts was fabricated.

  18. Brush seals for cryogenic applications

    NASA Technical Reports Server (NTRS)

    Proctor, Margaret P.

    1994-01-01

    This viewgraph presentation presents test results of brush seals for cryogenic applications. Leakage for a single brush seal was two to three times less than for a 12-tooth labyrinth seal. The maximum temperature rise for a single brush seal was less than 50 R and occurred at 25 psid across the seal and 35,000 rpm. A static blowout test demonstrated sealing capability up to 550 psid. The seal limit was not obtained. The power loss for a single brush at 35,000 rpm and 175 psid was 2.45 hp. Two brushes far apart leak less than two brushes tight packed. Rotor wear was approximately 0.00075 mils and bristle wear was 1-3 mils after 4-1/2 hours.

  19. Similarity analysis for the use of the 1U50228-47 O-ring in the S/A assembly

    NASA Technical Reports Server (NTRS)

    Eden, G. Scott

    1990-01-01

    All pressure seals for the Redesigned Solid Rocket Motor (RSRM) were designed using a minimum 10 percent O-ring squeeze criteria. The similarity between the current O-ring and its proposed replacement is analyzed. The intent of the analysis is to qualify the new O-ring to replace the current configuration O-ring.

  20. Hematology and chemistry reference values for free-ranging harbor seals (Phoca vitulina) and the effects of hemolysis on chemistry values of captive harbor seals.

    PubMed

    Morgan, L; Kumaresan, S; Thomas, C; MacWilliams, P

    1998-12-01

    Most reported laboratory reference values for harbor seals (Phoca vitulina) are derived from captive seals, or stranded seals that have recovered from disease in marine mammal centers. This study established hematology and serum chemistry reference values for free-ranging harbor seals, using methods and that are current and readily available, and determined the effects of hemolysis on serum chemistry values of captive harbor seals. Blood samples were collected for hematologic and serum chemistry measurements from 14 clinically normal, adult male and female harbor seals and two juvenile harbor seals (approximate age 6 mo) captured in saltwater sloughs and estuaries near Moss Landing, California, USA. Values for amylase, globulin, and differential leukocyte count, not previously reported, were determined. In general, hematology and chemistry values in adults were similar to those reported for free-ranging and captive harbor seals, except for glucose, urea nitrogen, and lactate dehydrogenase (LDH) values, which were higher than those reported previously. Red blood cell counts in the two juveniles were higher than in adults and in young harbor seals studied previously. To determine the effects of hemolysis on serum chemistry values, two intensities of hemolysis were generated experimentally in blood collected from 11 harbor seals recovering from injuries or stranding at the Marine Mammal Center (Sausalito, California 94965, USA). Moderate hemolysis (++, 1 g/L hemoglobin, red-tinged) significantly increased LDH activity, whereas severe hemolysis ( , 2 g/L hemoglobin, cherry red) significantly increased total protein, albumin, calculated globulin, LDH, and total bilirubin and significantly decreased creatinine. The effects of hemolysis must be considered when chemistry results of harbor seals are interpreted. PMID:10065846

  1. Seals Having Textured Portions for Protection in Space Environments

    NASA Technical Reports Server (NTRS)

    Daniels, Christopher (Inventor); Garafolo, Nicholas (Inventor)

    2016-01-01

    A sealing construct for a space environment includes a seal-bearing object, a seal on the seal-bearing object, and a seal-engaging object. The seal includes a seal body having a sealing surface, and a textured pattern at the sealing surface, the textured pattern defining at least one shaded channel surface. The seal-engaging object is selectively engaged with the seal-bearing object through the seal. The seal-engaging object has a sealing surface, wherein, when the seal-engaging object is selectively engaged with the seal-bearing object, the sealing surface of the seal-engaging object engages the sealing surface of the seal, and the seal is compressed between the seal-bearing object and the seal-engaging object such that at least one shaded channel surface engages the sealing surface of the seal-engaging object.

  2. Bellows sealed plug valve

    DOEpatents

    Dukas, Jr., Stephen J.

    1990-01-01

    A bellows sealed plug valve includes a valve body having an inlet passage and an outlet passage, a valve chamber between the inlet and outlet passages. A valve plug has substantially the same shape as the valve chamber and is rotatably disposed therein. A shaft is movable linearly in response to a signal from a valve actuator. A bellows is sealingly disposed between the valve chamber and the valve actuator and means are located between the bellows and the valve plug for converting linear movement of the shaft connected to the valve actuator to rotational movement of the plug. Various means are disclosed including helical thread mechanism, clevis mechanism and rack and pinion mechanism, all for converting linear motion to rotational motion.

  3. Coke oven door seal

    SciTech Connect

    Hendrych, G.

    1984-01-17

    A coke oven door seal in which a leaf spring is fixed to the inner end of a continuous concave seating structure which is peripherally mounted on the door frame. A terminally convex ridge structure extends endwise from the door jamb to flex the leaf spring sufficiently so as to form a continuous gas tight seal around the door. The leaf spring is flexed by the ridge by an amount that is greater than the deflection which would result only from the application of pressure on the leaf spring by coke oven gases. The leaf spring is also flexed by an amount that is less than the amount which would surpass its elastic limit. In an alternate embodiment, the leaf spring and seat structure are mounted on the door jamb while the ridge is mounted on the door frame.

  4. Labyrinth seal coal injector

    SciTech Connect

    Lindahl, P.D.

    1994-12-31

    This invention is a labyrinth seal coal injector able to inject dry, sized, coal or other materials having a significant amount of fines into a pressurized pipeline for transport or other purposes. The injector is comprised of a rotor or screw of steel helicoidal flights attached to a steel shaft that is rotated by a motor. The rotor is in a pipe-like housing with an inlet on the side for coal and an outlet on the downstream end of the housing at the reducer. The reducer allows the loose coal or other particles to become compacted and form an hydraulic seal against the pressurized water. Water is introduced into the reducer and serves to lubricate the compacted coal as it is introduced into the pipeline. A knife valve is used in initiation of the flow of coal into the pipeline.

  5. Damping seal verification setup

    NASA Technical Reports Server (NTRS)

    Cappel, K. L.

    1985-01-01

    The heart of the Space Shuttle Main Engine (SSME) is a set of turbopumps that propel cryogenic fluids at very high pressures and flow rates, at rotor speeds up to 37,000 rpm. Bushing seals that cause the flow in the fluid film to become turbulent, by means of a multiplicity of pockets, were shown theoretically not only to inhibit subsynchronous whirl, but to reduce leakage as well. However, experimental data that relate these two desirable characteristics to such parameters as pocket depth, Reynolds number (based on clearance and axial flow rate), and rotating speed are limited. To obtain the required data, NASA's Marshall Space Flight Center (MSFC) commissioned Wyle Laboratories to design, build and operate a test rig in which the damping efficacy and leakage reduction of typical candidate seals are to be evaluated.

  6. Gas turbine sealing apparatus

    DOEpatents

    Wiebe, David J; Wessell, Brian J; Ebert, Todd; Beeck, Alexander; Liang, George; Marussich, Walter H

    2013-02-19

    A gas turbine includes forward and aft rows of rotatable blades, a row of stationary vanes between the forward and aft rows of rotatable blades, an annular intermediate disc, and a seal housing apparatus. The forward and aft rows of rotatable blades are coupled to respective first and second portions of a disc/rotor assembly. The annular intermediate disc is coupled to the disc/rotor assembly so as to be rotatable with the disc/rotor assembly during operation of the gas turbine. The annular intermediate disc includes a forward side coupled to the first portion of the disc/rotor assembly and an aft side coupled to the second portion of the disc/rotor assembly. The seal housing apparatus is coupled to the annular intermediate disc so as to be rotatable with the annular intermediate disc and the disc/rotor assembly during operation of the gas turbine.

  7. Ringing wormholes

    SciTech Connect

    Konoplya, R.A.; Molina, C.

    2005-06-15

    We investigate the response of traversable wormholes to external perturbations through finding their characteristic frequencies and time-domain profiles. The considered solution describes traversable wormholes between the branes in the two brane Randall-Sundrum model and was previously found within Einstein gravity with a conformally coupled scalar field. The evolution of perturbations of a wormhole is similar to that of a black hole and represents damped oscillations (ringing) at intermediately late times, which are suppressed by power-law tails (proportional to t{sup -2} for monopole perturbations) at asymptotically late times.

  8. Sealing Nitrogen Tetroxide Leaks

    NASA Technical Reports Server (NTRS)

    Garrard, George G.; Houston, Donald W.; Scott, Frank D.

    1990-01-01

    Use of Furmanite FSC-N-6B sealant in clam-shell sealing device makes it possible to stop leaks of nitrogen tetroxide through defective or improperly-seated plumbing fittings. Devised to stop leaks in vent line of small rocket motor on Space Shuttle. Also used on plumbing containing hydrazine and other hazardous fluids, and repair withstands severe temperature, vibration, and shock. Leaks stopped in place, without draining or replacement of leaking parts.

  9. Seal Monitoring System for an Explosive Containment Vessel

    SciTech Connect

    Pastrnak, J W; Henning, C D; Switzer, V A; Grundler, W; Holloway, J R; Morrison, J J; Hafner, R S

    2004-06-28

    Researchers at Lawrence Livermore National Laboratory are developing high-performance explosive firing vessels to contain (one time) explosive detonations that contain toxic metals and hazardous gases. The filament-wound polymer composite vessels are designed to contain up to 80 lb (TNT equivalent) explosive in a 2-meter sphere without leakage. So far, two half-scale (1-meter diameter) vessels have been tested; one up to 150% of the design explosive limit. Peak dynamic pressures in excess of 280 MPa (40 Ksi) in the vessel were calculated and measured. Results indicated that there was a small amount of gas and particle leakage past the first two of the seven o-ring seals. However, the remaining five seals prevented any transient leakage of the toxic gases and particulates out of the vessel. These results were later confirmed by visual inspection and particulate analysis of swipes taken from the sealing surfaces.

  10. Pneumatic stowing seals mines

    SciTech Connect

    Brezovec, D.

    1983-11-01

    A mechanized technique to seal abandoned mines has been used successfully to close 13 openings at Duquesne Light Co.'s mined-out Warwick No. 2 mine, near Greensboro, Pa. The mechanized system, which uses a pneumatic stower and crushed limestone, closed the entries more economically and in less time than it would have taken to install traditional concrete block stopping and clay plug seals, according to John C. Draper. Draper, a mining engineer with Duquesne Light's coal department, was in charge of installing the Warwick seals in a Bureau of Mines-sponsored field test on the pneumatic sealing technique. The lowest estimated cost for installing conventional stopping and plug closures for the 13 Warwick openings was $225,000, says Draper, while the openings were closed using the mechanized system for $245,000. Draper says the newer stopping cost more in the instance because work was stopped often to gather information for the experiment. The experimental closures were installed in 38 days. The job would have taken at least 149 days if traditional closures were being installed, Draper say. To install a traditional concrete block/clay plug closure, the mine opening must be cleaned thoroughly and the roof must be supported for some 3 ft from the outside. Then a solid wall or stopping must be built 25 ft from the surface and the entry must be packed with clay to the surface. Much of this job requires workers to remain underground. In pneumatic stowing, 1 1/2-in. crushed limestone with fines is conveyed through a pipeline and into the mine opening under low air pressure. Watertight seals can be installed by blowing about 10 ft of rock into the opening against the top to act as roof support. Safety posts are installed and about 10 or 15 ft of mine entry is cleaned. About 2 in. of raw cement or bentonite is placed on the floor and limestone mixed with dry cement or bentonite is blown into the opening.

  11. Potential seal candidates for high-energy propellants. [for Space Shuttle orbital maneuvering system

    NASA Technical Reports Server (NTRS)

    Merz, P. L.

    1975-01-01

    Five potential seal candidates (linear Tefzel, linear Halar, crosslinked Halar, Viton ECD-006, and phosphazine fluoroelastomer) were evaluated for the orbital maneuvering system of the space shuttle. Since this system employs nitrogen tetroxide (N2O4) and monomethyl hydrazine (MMH) as hypergolic propellants, the seal candidates were selected on the basis of projected chemical resistance as well as rheological behavior. Chemical resistance to these high-energy fuels was determined via conventional isothermal and thermal cycling immersion tests. Rheological measurements, however, were performed on O-rings molded from the subject seal candidates. Properties determined, such as cyclic work and hysteresis, stress relaxation, and indicated modulus, therefore, relate to the O-ring seals themselves.

  12. Navy GTE seal development activity

    NASA Technical Reports Server (NTRS)

    Grala, Carl P.

    1993-01-01

    Under the auspices of the Integrated High Performance Turbine Engine Technology Initiative, the Naval Air Warfare Center conducts advanced development programs for demonstration in the next generation of air-breathing propulsion systems. Among the target technologies are gas path and lube oil seals. Two development efforts currently being managed by NAWCAD are the High Performance Compressor Discharge Film-Riding Face Seal and the Subsonic Core High Speed Air/Oil Seal. The High Performance Compressor Discharge Film-Riding Face Seal Program aims at reducing parasitic leakage through application of a film-riding face sea concept to the compressor discharge location of a Phase 2 IHPTET engine. An order-of-magnitude leakage reduction relative to current labyrinth seal configurations is expected. Performance goals for these seals are (1) 1200 F air temperature, (2) 800 feet-per-second surface velocity, and (3) 600 SPI differential pressure. The two designs chosen for fabrication and rig test are a spiral groove and a Rayleigh step seal. Rig testing is currently underway. The Subsonic Core High Speed Air/Oil Seal Program is developing shaft-to-ground seals for next-generation propulsion systems that will minimize leakage and provide full life. Significantly higher rotor speeds and temperatures will be experienced. Technologies being exploited include, hydrodynamic lift assist features, ultra light weight designs, and improved cooling schemes. Parametric testing has been completed; a final seal design is entering the endurance test phase.

  13. Navy GTE seal development activity

    NASA Astrophysics Data System (ADS)

    Grala, Carl P.

    1993-10-01

    Under the auspices of the Integrated High Performance Turbine Engine Technology Initiative, the Naval Air Warfare Center conducts advanced development programs for demonstration in the next generation of air-breathing propulsion systems. Among the target technologies are gas path and lube oil seals. Two development efforts currently being managed by NAWCAD are the High Performance Compressor Discharge Film-Riding Face Seal and the Subsonic Core High Speed Air/Oil Seal. The High Performance Compressor Discharge Film-Riding Face Seal Program aims at reducing parasitic leakage through application of a film-riding face sea concept to the compressor discharge location of a Phase 2 IHPTET engine. An order-of-magnitude leakage reduction relative to current labyrinth seal configurations is expected. Performance goals for these seals are (1) 1200 F air temperature, (2) 800 feet-per-second surface velocity, and (3) 600 SPI differential pressure. The two designs chosen for fabrication and rig test are a spiral groove and a Rayleigh step seal. Rig testing is currently underway. The Subsonic Core High Speed Air/Oil Seal Program is developing shaft-to-ground seals for next-generation propulsion systems that will minimize leakage and provide full life. Significantly higher rotor speeds and temperatures will be experienced. Technologies being exploited include, hydrodynamic lift assist features, ultra light weight designs, and improved cooling schemes. Parametric testing has been completed; a final seal design is entering the endurance test phase.

  14. TECHNOLOGY ROADMAPPING FOR IAEA SEALS.

    SciTech Connect

    HOFFHEINS,B.; ANNESE,C.; GOODMAN,M.; OCONNOR,W.; GUSHUE,S.; PEPPER,S.

    2003-07-13

    In the fall of 2002, the U.S. Support Program (USSP) initiated an effort to define a strategy or ''roadmap'' for future seals technologies and to develop a generalized process for planning safeguards equipment development, which includes seals and other safeguards equipment. The underlying objectives of the USSP include becoming more proactive than reactive in addressing safeguards equipment needs, helping the IAEA to maintain an inventory of cost-effective, reliable, and effective safeguards equipment, establishing a long-term planning horizon, and securing IAEA ownership in the process of effective requirements definition and timely transitioning of new or improved systems for IAEA use. At an initial workshop, seals, their functions, performance issues, and future embodiments were discussed in the following order: adhesive seals, metal seals, passive and active loop seals, ultrasonic seals, tamper indicating enclosures (including sample containers, equipment enclosures, and conduits). Suggested improvements to these technologies focused largely on a few themes: (1) The seals must be applied quickly, easily, and correctly; (2) Seals and their associated equipment should not unduly add bulk or weight to the inspectors load; (3) Rapid, in-situ verifiability of seals is desirable; and (4) Seal systems for high risk or high value applications should have two-way, remote communications. Based upon these observations and other insights, the participants constructed a skeletal approach for seals technology planning. The process begins with a top-level review of the fundamental safeguards requirements and extraction of required system features, which is followed by analysis of suitable technologies and identification of technology gaps, and finally by development of a planning schedule for system improvements and new technology integration. Development of a comprehensive procedure will require the partnership and participation of the IAEA. The presentation will include a

  15. Closure and Sealing Design Calculation

    SciTech Connect

    T. Lahnalampi; J. Case

    2005-08-26

    The purpose of the ''Closure and Sealing Design Calculation'' is to illustrate closure and sealing methods for sealing shafts, ramps, and identify boreholes that require sealing in order to limit the potential of water infiltration. In addition, this calculation will provide a description of the magma that can reduce the consequences of an igneous event intersecting the repository. This calculation will also include a listing of the project requirements related to closure and sealing. The scope of this calculation is to: summarize applicable project requirements and codes relating to backfilling nonemplacement openings, removal of uncommitted materials from the subsurface, installation of drip shields, and erecting monuments; compile an inventory of boreholes that are found in the area of the subsurface repository; describe the magma bulkhead feature and location; and include figures for the proposed shaft and ramp seals. The objective of this calculation is to: categorize the boreholes for sealing by depth and proximity to the subsurface repository; develop drawing figures which show the location and geometry for the magma bulkhead; include the shaft seal figures and a proposed construction sequence; and include the ramp seal figure and a proposed construction sequence. The intent of this closure and sealing calculation is to support the License Application by providing a description of the closure and sealing methods for the Safety Analysis Report. The closure and sealing calculation will also provide input for Post Closure Activities by describing the location of the magma bulkhead. This calculation is limited to describing the final configuration of the sealing and backfill systems for the underground area. The methods and procedures used to place the backfill and remove uncommitted materials (such as concrete) from the repository and detailed design of the magma bulkhead will be the subject of separate analyses or calculations. Post-closure monitoring will not

  16. HSCT Exhaust System Anticipated Seal Needs

    NASA Technical Reports Server (NTRS)

    Vacek, Larry

    2006-01-01

    The overview for HSR seals includes defining objectives, summarizing sealing and material requirements, presenting relevant seal cross-sections, and identifying technology needs. Overview presentations are given for the inlet, turbomachinery, combustor and nozzle. The HSCT and HSR seal issues center on durability and efficiency of rotating equipment seals, structural seals and high speed bearing and sump seals. Tighter clearances, propulsion system size and thermal requirements challenge component designers.

  17. Canister, Sealing Method And Composition For Sealing A Borehole

    DOEpatents

    Brown, Donald W.; Wagh, Arun S.

    2005-06-28

    Method and composition for sealing a borehole. A chemically bonded phosphate ceramic sealant for sealing, stabilizing, or plugging boreholes is prepared by combining an oxide or hydroxide and a phosphate with water to form slurry. The slurry is introduced into the borehole where the seal, stabilization or plug is desired, and then allowed to set up to form the high strength, minimally porous sealant, which binds strongly to itself and to underground formations, steel and ceramics.

  18. Sealing and Sealing Monitoring System for Mars Sample Return

    NASA Astrophysics Data System (ADS)

    Vrancken, D.; De Ridder, M.; Preud'Homme, F.; Coste, P.; Durrant, S.

    In the frame of the Mars Sample Return mission a novel concept for a sealing and sealing monitoring system has been developed The sealing system is designed to safely bring Martian soil and atmosphere samples to Earth for analysis on potential life The described sealing and sealing monitoring system is compliant with class V planetary protection requirements The governing planetary protection requirements have been translated into a set of quantifiable engineering requirements These requirements have been assessed with respect to the characteristics of existing sealing technologies This study showed that the most critical issue to comply with the planetary protection requirements is breaking the link with the Mars environment A market and technology research showed no convincing sealing concept within the imposed constraints For this reason the study has focused on a new method for breaking the link with the Mars environment The sealing system is based on a Sample Bag in which the potentially contaminated Martian samples are contained The Sample Bag is made of a thin metal foil and the bio-tight seal is applied using brazing technology Breaking the link with Mars is established by cutting through the brazing seam The obtained containment system has a guaranteed sterile outer surface The rationale for the brazing technology is the melting temperature of the brazing material which is above 500 r C At these temperatures all carbon-carbon links are destroyed Assuming that the bio-hazardous materials are built-up from C-C based

  19. High temperature braided rope seals for static sealing applications

    NASA Technical Reports Server (NTRS)

    Adams, Michael L.; Olsen, Andrew; Darolia, Ram; Steinetz, Bruce M.; Bartolotta, Paul A.

    1996-01-01

    Achieving efficiency and performance goals of advanced aircraft and industrial systems are leading designers to implement high temperature materials such as ceramics and intermetallics. Generally these advanced materials are applied selectively in the highest temperature sections of the engine system including the combustor and high pressure turbine, amongst others. Thermal strains that result in attaching the low expansion-rate components to high expansion rate superalloy structures can cause significant life reduction in the components. Seals are being designed to both seal and to serve as compliant mounts allowing for relative thermal growths between high temperature but brittle primary structures and the surrounding support structures. Designers require high temperature, low-leakage, compliant seals to mitigate thermal stresses and control parasitic and cooling airflow between structures. NASA is developing high temperature braided rope seals in a variety of configurations to help solve these problems. This paper will describe the types of seals being developed, describe unique test techniques used to assess seal performance, and present leakage flow data under representative pressure, temperature and scrubbing conditions. Feasibility of the braided rope seals for both an industrial tube seal and a turbine vane seal application is also demonstrated.

  20. Setting properties and sealing ability of hydraulic temporary sealing materials.

    PubMed

    Ogura, Yoko; Katsuumi, Ichiroh

    2008-09-01

    This study sought to investigate the setting progress and sealing ability of hydraulic temporary sealing materials used in endodontic treatment: Lumicon, Caviton, and HY-Seal. To evaluate setting progress, the materials were filled into glass tubes with one end sealed and immersed in water. After immersion, a measurement apparatus was inserted from the non-immersed end and the set area was determined by subtracting the unset area from the sample thickness. To evaluate sealing ability, materials were filled into glass tubes and divided into four groups based on different immersion times. Thermal cycling and dye penetration were performed. At 7 days, the setting depths of HY-Seal and Caviton were almost equivalent to full sample thickness, while that of Lumicon was only half of full sample thickness (p < 0.01). On sealing ability, Lumicon ranked the highest followed by Caviton, whereas HY-Seal was unstable (p < 0.01). These results suggested that there was no correlation between setting progress and sealing ability. PMID:18972791

  1. Pathological findings in the Hawaiian monk seal.

    PubMed

    Banish, L D; Gilmartin, W G

    1992-07-01

    Postmortem examinations were performed on 45 Hawaiian monk seals (Monachus schauinslandi) collected during field research on the beaches of the Northwestern Hawaiian Islands (USA) from 1981 to 1985. Both males and females of all age groups, perinatal through adult, were examined. Frequent findings included parasites, trauma, cardiovascular disease (congenital and acquired), and respiratory infections. Emaciation was a common condition. All animals except neonates were infected with parasites; infection was severe in several cases. Splenic hematopoiesis was a universal histopathologic finding. Some cases exhibited lesions consistent with renal, gastrointestinal, and toxic disorders; ectopic tissue calcification; gallstones; and ophthalmologic and dental problems. PMID:1512875

  2. Aft outer rim seal arrangement

    DOEpatents

    Lee, Ching-Pang; Tham, Kok-Mun; Schroeder, Eric; Meeroff, Jamie; Miller, Jr., Samuel R; Marra, John J; Campbell, Christian X

    2015-04-28

    An outer rim seal arrangement (10), including: an annular rim (70) centered about a longitudinal axis (30) of a rotor disc (31), extending fore and having a fore-end (72), an outward-facing surface (74), and an inward-facing surface (76); a lower angel wing (62) extending aft from a base of a turbine blade (22) and having an aft end (64) disposed radially inward of the rim inward-facing surface to define a lower angel wing seal gap (80); an upper angel wing (66) extending aft from the turbine blade base and having an aft end (68) disposed radially outward of the rim outward-facing surface to define a upper angel wing seal gap (80, 82); and guide vanes (100) disposed on the rim inward-facing surface in the lower angel wing seal gap. Pumping fins (102) may be disposed on the upper angel wing seal aft end in the upper angel wing seal gap.

  3. Seals cap rotary kiln emissions

    SciTech Connect

    Gunkle, D.W. )

    1993-09-01

    The possibility of producing fugitive emissions is one of the most critical aspects of an incineration system. Whether such a system processes hazardous, medical, mixed or municipal waste, fugitive emissions are of special concern to system operators and the public alike. Effectively designed rotary-kiln seals can reduce fugitive emissions to acceptable, minimal levels. Modern air monitoring systems track incineration site emissions. Possible emissions sources include excavation and transfer sites, storage areas, material-feed systems, rotary kiln seals, and exhaust stacks. Several options are available for rotary-kiln seals. Six are discussed here: labyrinth; overlapping spring plate; graphite block; pneumatic; shrouded; and overpressure. Kiln seals are used to prevent process gases from escaping or ambient air from entering a rotary kiln uncontrolled. They are not designed to function as material seals, or prevent spills of solids or liquids. Seal design involves considering differential pressure produced by a kiln's internal-to-external temperature, pressure excursions (explosions) and material spills.

  4. Metal to ceramic sealed joint

    DOEpatents

    Lasecki, J.V.; Novak, R.F.; McBride, J.R.

    1991-08-27

    A metal to ceramic sealed joint which can withstand wide variations in temperature and maintain a good seal is provided for use in a device adapted to withstand thermal cycling from about 20 to about 1000 degrees C. The sealed joint includes a metal member, a ceramic member having an end portion, and an active metal braze forming a joint to seal the metal member to the ceramic member. The joint is positioned remote from the end portion of the ceramic member to avoid stresses at the ends or edges of the ceramic member. The sealed joint is particularly suited for use to form sealed metal to ceramic joints in a thermoelectric generator such as a sodium heat engine where a solid ceramic electrolyte is joined to metal parts in the system. 11 figures.

  5. Metal to ceramic sealed joint

    DOEpatents

    Lasecki, John V.; Novak, Robert F.; McBride, James R.

    1991-01-01

    A metal to ceramic sealed joint which can withstand wide variations in temperature and maintain a good seal is provided for use in a device adapted to withstand thermal cycling from about 20 to about 1000 degrees C. The sealed joint includes a metal member, a ceramic member having an end portion, and an active metal braze forming a joint to seal the metal member to the ceramic member. The joint is positioned remote from the end portion of the ceramic member to avoid stresses at the ends or edges of the ceramic member. The sealed joint is particularly suited for use to form sealed metal to ceramic joints in a thermoelectric generator such as a sodium heat engine where a solid ceramic electrolyte is joined to metal parts in the system.

  6. Development of helicopter engine seals

    NASA Technical Reports Server (NTRS)

    Lynwander, P.

    1973-01-01

    An experimental evaluation of main shaft seals for helicopter gas turbine engines was conducted with shaft speeds to 213 m/s(700 ft/sec), air pressures to 148 N/sq cm (215 psia), and air temperatures to 645 K (675 F). Gas leakage test results indicate that conventional seals will not be satisfactory for high-pressure sealing because of excessive leakage. The self-acting face seal, however, had significantly lower leakage and operated with insignificant wear during a 150-hour endurance test at sliding speeds to 145 m/s (475 ft/sec), air pressures to 124 N/sq cm (180 psia), and air temperatures to 408 K (275 F). Wear measurements indicate that noncontact operation was achieved at shaft speeds of 43,000 rpm. Evaluation of the self-acting circumferential seal was inconclusive because of seal dimensional variations.

  7. Low-Torque Seal Development

    NASA Technical Reports Server (NTRS)

    Lattime, Scott B.; Borowski, Richard

    2009-01-01

    The EcoTurn Class K production prototypes have passed all AAR qualification tests and received conditional approval. The accelerated life test on the second set of seals is in progress. Due to the performance of the first set, no problems are expected.The seal has demonstrated superior performance over the HDL seal in the test lab with virtually zero torque and excellent contamination exclusion and grease retention.

  8. Immunogenetics of the Elephant Seal

    NASA Technical Reports Server (NTRS)

    Garza, John Carlos

    1999-01-01

    The goals of this cooperative agreement fall into three categories: 1) A basic description of Immunogenetic variation in the northern elephant seal genome; 2) A basic genetic map of the northern elephant seal genome; 3). Microevolutionary forces in the northern elephant seal genome. The results described in this report were acquired using funds from this cooperative agreement together with funds from a National Science Foundation Dissertation Improvement Grant.

  9. An Experimental Investigation of Leak Rate Performance of a Subscale Candidate Elastomer Docking Space Seal

    NASA Technical Reports Server (NTRS)

    Garafolo, Nicholas G.; Daniels, Christopher C.

    2011-01-01

    A novel docking seal was developed for the main interface seal of NASA s Low Impact Docking System (LIDS). This interface seal was designed to maintain acceptable leak rates while being exposed to the harsh environmental conditions of outer space. In this experimental evaluation, a candidate docking seal assembly called Engineering Development Unit (EDU58) was characterized and evaluated against the Constellation Project leak rate requirement. The EDU58 candidate seal assembly was manufactured from silicone elastomer S0383-70 vacuum molded in a metal retainer ring. Four seal designs were considered with unique characteristic heights. The leak rate performance was characterized through a mass point leak rate method by monitoring gas properties within an internal control volume. The leakage performance of the seals were described herein at representative docking temperatures of -50, +23, and +50 C for all four seal designs. Leak performance was also characterized at 100, 74, and 48 percent of full closure. For all conditions considered, the candidate seal assemblies met the Constellation Project leak rate requirement.

  10. Testing of molded high temperature plastic actuator road seals for use in advanced aircraft hydraulic systems

    NASA Technical Reports Server (NTRS)

    Waterman, A. W.; Huxford, R. L.; Nelson, W. G.

    1976-01-01

    Molded high temperature plastic first and second stage rod seal elements were evaluated in seal assemblies to determine performance characteristics. These characteristics were compared with the performance of machined seal elements. The 6.35 cm second stage Chevron seal assembly was tested using molded Chevrons fabricated from five molding materials. Impulse screening tests conducted over a range of 311 K to 478 K revealed thermal setting deficiencies in the aromatic polyimide molding materials. Seal elements fabricated from aromatic copolyester materials structurally failed during impulse cycle calibration. Endurance testing of 3.85 million cycles at 450 K using MIL-H-83283 fluid showed poorer seal performance with the unfilled aromatic polyimide material than had been attained with seals machined from Vespel SP-21 material. The 6.35 cm first stage step-cut compression loaded seal ring fabricated from copolyester injection molding material failed structurally during impulse cycle calibration. Molding of complex shape rod seals was shown to be a potentially controllable technique, but additional molding material property testing is recommended.

  11. Vacuum seals design and testing for a linear accelerator of the National Spallation Neutron Source

    SciTech Connect

    Z. Chen; C. Gautier; F. Hemez; N. K. Bultman

    2000-02-01

    Vacuum seals are very important to ensure that the Spallation Neutron Source (SNS) Linac has an optimum vacuum system. The vacuum joints between flanges must have reliable seals to minimize the leak rate and meet vacuum and electrical requirements. In addition, it is desirable to simplify the installation and thereby also simplify the maintenance required. This report summarizes an investigation of the metal vacuum seals that include the metal C-seal, Energized Spring seal, Helcoflex Copper Delta seal, Aluminum Delta seal, delta seal with limiting ring, and the prototype of the copper diamond seals. The report also contains the material certifications, design, finite element analysis, and testing for all of these seals. It is a valuable reference for any vacuum system design. To evaluate the suitability of several types of metal seals for use in the SNS Linac and to determine the torque applied on the bolts, a series of vacuum leak rate tests on the metal seals have been completed at Los Alamos Laboratory. A copper plated flange, using the same type of delta seal that was used for testing with the stainless steel flange, has also been studied and tested. A vacuum seal is desired that requires significantly less loading than a standard ConFlat flange with a copper gasket for the coupling cavity assembly. To save the intersegment space the authors use thinner flanges in the design. The leak rate of the thin ConFlat flange with a copper gasket is a baseline for the vacuum test on all seals and thin flanges. A finite element analysis of a long coupling cavity flange with a copper delta seal has been performed in order to confirm the design of the long coupling cavity flange and the welded area of a cavity body with the flange. This analysis is also necessary to predict a potential deformation of the cavity under the combined force of atmospheric pressure and the seating load of the seal. Modeling of this assembly has been achieved using both HKS/Abaqus and COSMOS

  12. Brush seals for turbine engine fuel conservation

    NASA Astrophysics Data System (ADS)

    Sousa, Mike

    1994-07-01

    The program objective is to demonstrate brush seals for replacing labyrinth seals in turboprop engines. The approach taken was to design and procure brush seals with assistance from Sealol, modify and instrument an existing T407 low pressure turbine test rig, replace inner balance piston and outer balance piston labyrinth seals with brush seals, conduct cyclic tests to evaluate seal leakage at operating pressures and temperatures, and evaluate effect of seal pack width and rotor eccentricity. Results are presented in viewgraph format and show that brush seals offer performance advantages over labyrinth seals.

  13. Brush seals for turbine engine fuel conservation

    NASA Technical Reports Server (NTRS)

    Sousa, Mike

    1994-01-01

    The program objective is to demonstrate brush seals for replacing labyrinth seals in turboprop engines. The approach taken was to design and procure brush seals with assistance from Sealol, modify and instrument an existing T407 low pressure turbine test rig, replace inner balance piston and outer balance piston labyrinth seals with brush seals, conduct cyclic tests to evaluate seal leakage at operating pressures and temperatures, and evaluate effect of seal pack width and rotor eccentricity. Results are presented in viewgraph format and show that brush seals offer performance advantages over labyrinth seals.

  14. Electrodes for sealed secondary batteries

    NASA Technical Reports Server (NTRS)

    Boies, D. B.; Child, F. T.

    1972-01-01

    Self-supporting membrane electrode structures, in which active ingredients and graphite are incorporated in a polymeric matrix, improve performance of electrodes in miniature, sealed, alkaline storage batteries.

  15. Pressure sensor for sealed containers

    DOEpatents

    Hodges, Franklin R.

    2001-01-01

    A magnetic pressure sensor for sensing a pressure change inside a sealed container. The sensor includes a sealed deformable vessel having a first end attachable to an interior surface of the sealed container, and a second end. A magnet mounted to the vessel second end defining a distance away from the container surface provides an externally detectable magnetic field. A pressure change inside the sealed container causes deformation of the vessel changing the distance of the magnet away from the container surface, and thus the detectable intensity of the magnetic field.

  16. Borehole sealing method and apparatus

    DOEpatents

    Hartley, James N.; Jansen, Jr., George

    1977-01-01

    A method and apparatus is described for sealing boreholes in the earth. The borehole is blocked at the sealing level, and a sealing apparatus capable of melting rock and earth is positioned in the borehole just above seal level. The apparatus is heated to rock-melting temperature and powdered rock or other sealing material is transported down the borehole to the apparatus where it is melted, pooling on the mechanical block and allowed to cool and solidify, sealing the hole. Any length of the borehole can be sealed by slowly raising the apparatus in the borehole while continuously supplying powdered rock to the apparatus to be melted and added to the top of the column of molten and cooling rock, forming a continuous borehole seal. The sealing apparatus consists of a heater capable of melting rock, including means for supplying power to the heater, means for transporting powdered rock down the borehole to the heater, means for cooling the apparatus and means for positioning the apparatus in the borehole.

  17. Advanced High Temperature Structural Seals

    NASA Technical Reports Server (NTRS)

    Newquist, Charles W.; Verzemnieks, Juris; Keller, Peter C.; Rorabaugh, Michael; Shorey, Mark

    2002-01-01

    This program addresses the development of high temperature structural seals for control surfaces for a new generation of small reusable launch vehicles. Successful development will contribute significantly to the mission goal of reducing launch cost for small, 200 to 300 pound payloads. Development of high temperature seals is mission enabling. For instance, ineffective control surface seals can result in high temperature (3100 F) flows in the elevon area exceeding structural material limits. Longer sealing life will allow use for many missions before replacement, contributing to the reduction of hardware, operation and launch costs.

  18. SEAL FOR HIGH SPEED CENTRIFUGE

    DOEpatents

    Skarstrom, C.W.

    1957-12-17

    A seal is described for a high speed centrifuge wherein the centrifugal force of rotation acts on the gasket to form a tight seal. The cylindrical rotating bowl of the centrifuge contains a closure member resting on a shoulder in the bowl wall having a lower surface containing bands of gasket material, parallel and adjacent to the cylinder wall. As the centrifuge speed increases, centrifugal force acts on the bands of gasket material forcing them in to a sealing contact against the cylinder wall. This arrangememt forms a simple and effective seal for high speed centrifuges, replacing more costly methods such as welding a closure in place.

  19. Advanced Duct Sealing Testing

    SciTech Connect

    Sherman, Max H.; Walker, Iain S.

    2003-08-01

    Duct leakage has been identified as a major source of energy loss in residential buildings. Most duct leakage occurs at the connections to registers, plenums or branches in the duct system. At each of these connections a method of sealing the duct system is required. Typical sealing methods include tapes or mastics applied around the joints in the system. Field examinations of duct systems have typically shown that these seals tend to fail over extended periods of time. The Lawrence Berkeley National Laboratory has been testing sealant durability for several years. Typical duct tape (i.e. fabric backed tapes with natural rubber adhesives) was found to fail more rapidly than all other duct sealants. This report summarizes the results of duct sealant durability testing of five UL 181B-FX listed duct tapes (three cloth tapes, a foil tape and an Oriented Polypropylene (OPP) tape). One of the cloth tapes was specifically developed in collaboration with a tape manufacturer to perform better in our durability testing. The first test involved the aging of common ''core-to-collar joints'' of flexible duct to sheet metal collars, and sheet metal ''collar-to-plenum joints'' pressurized with 200 F (93 C) air. The second test consisted of baking duct tape specimens in a constant 212 F (100 C) oven following the UL 181B-FX ''Temperature Test'' requirements. Additional tests were also performed on only two tapes using sheet metal collar-to-plenum joints. Since an unsealed flexible duct joint can have a variable leakage depending on the positioning of the flexible duct core, the durability of the flexible duct joints could not be based on the 10% of unsealed leakage criteria. Nevertheless, the leakage of the sealed specimens prior to testing could be considered as a basis for a failure criteria. Visual inspection was also documented throughout the tests. The flexible duct core-to-collar joints were inspected monthly, while the sheet metal collar-to-plenum joints were inspected

  20. Seal the Deal

    NASA Technical Reports Server (NTRS)

    1998-01-01

    AvanTeco Corporation has developed a moisture/contaminant sensor chip. This newly developed chip rapidly responds to the presence of moisture, especially in condensed form and in presence of ionic impurities. It determines whether moisture has permeated a hermetically sealed package or a plastic encapsulated microcircuit. The sensor chip was designed as a "go/no go" chip, which is assembled with other chips in a multi-chip module to assess the risk of failure for the entire module. It has been commercialized and is sold by Revtek, Inc.

  1. Sealing the mitochondrial respirasome.

    PubMed

    Winge, Dennis R

    2012-07-01

    The mitochondrial respiratory chain is organized within an array of supercomplexes that function to minimize the generation of reactive oxygen species (ROS) during electron transfer reactions. Structural models of supercomplexes are now known. Another recent advance is the discovery of non-OXPHOS complex proteins that appear to adhere to and seal the individual respiratory complexes to form stable assemblages that prevent electron leakage. This review highlights recent advances in our understanding of the structures of supercomplexes and the factors that mediate their stability. PMID:22586278

  2. 30 CFR 57.8535 - Seals.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Seals. 57.8535 Section 57.8535 Mineral....8535 Seals. Seals shall be provided with a means for checking the quality of air behind the seal and a means to prevent a water head from developing unless the seal is designed to impound water....

  3. 30 CFR 57.8535 - Seals.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Seals. 57.8535 Section 57.8535 Mineral....8535 Seals. Seals shall be provided with a means for checking the quality of air behind the seal and a means to prevent a water head from developing unless the seal is designed to impound water....

  4. 19 CFR 113.25 - Seals.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false Seals. 113.25 Section 113.25 Customs Duties U.S... Bond Requirements § 113.25 Seals. When a seal is required, the seal shall be affixed adjoining the signatures of principal and surety, if individuals, and the corporate seal shall be affixed close to...

  5. 30 CFR 57.8535 - Seals.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Seals. 57.8535 Section 57.8535 Mineral....8535 Seals. Seals shall be provided with a means for checking the quality of air behind the seal and a means to prevent a water head from developing unless the seal is designed to impound water....

  6. 19 CFR 113.25 - Seals.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 1 2013-04-01 2013-04-01 false Seals. 113.25 Section 113.25 Customs Duties U.S... Bond Requirements § 113.25 Seals. When a seal is required, the seal shall be affixed adjoining the signatures of principal and surety, if individuals, and the corporate seal shall be affixed close to...

  7. 19 CFR 113.25 - Seals.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Seals. 113.25 Section 113.25 Customs Duties U.S... Bond Requirements § 113.25 Seals. When a seal is required, the seal shall be affixed adjoining the signatures of principal and surety, if individuals, and the corporate seal shall be affixed close to...

  8. 19 CFR 113.25 - Seals.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Seals. 113.25 Section 113.25 Customs Duties U.S... Bond Requirements § 113.25 Seals. When a seal is required, the seal shall be affixed adjoining the signatures of principal and surety, if individuals, and the corporate seal shall be affixed close to...

  9. 30 CFR 57.8535 - Seals.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Seals. 57.8535 Section 57.8535 Mineral....8535 Seals. Seals shall be provided with a means for checking the quality of air behind the seal and a means to prevent a water head from developing unless the seal is designed to impound water....

  10. 30 CFR 57.8535 - Seals.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Seals. 57.8535 Section 57.8535 Mineral....8535 Seals. Seals shall be provided with a means for checking the quality of air behind the seal and a means to prevent a water head from developing unless the seal is designed to impound water....

  11. 19 CFR 113.25 - Seals.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false Seals. 113.25 Section 113.25 Customs Duties U.S... Bond Requirements § 113.25 Seals. When a seal is required, the seal shall be affixed adjoining the signatures of principal and surety, if individuals, and the corporate seal shall be affixed close to...

  12. Detection of Cryptosporidium sp. in two new seal species, Phoca vitulina and Cystophora cristata, and a novel Cryptosporidium genotype in a third seal species, Pagophilus groenlandicus, from the Gulf of Maine.

    PubMed

    Bass, A L; Wallace, C C; Yund, P O; Ford, T E

    2012-04-01

    Data on the geographic distribution and host specificity of Cryptosporidium spp. are critical for developing an understanding of likely transmission patterns in nature. During a molecular-based survey of fecal samples from 293 terrestrial and aquatic animals in Maine, USA, we detected Cryptosporidium sp. in 11 harbor seals (Phoca vitulina), 1 hooded seal (Cystophora cristata), and 1 harp seal (Pagophilus groenlandicus). None of the terrestrial or freshwater mammal fecal samples or bird samples tested positive for Cryptosporidium sp. However, the sequencing results of the small subunit (ssu) rRNA gene indicate that the seals were infected with an undescribed species of Cryptosporidium , previously isolated only from ringed seals (Phoca hispida) in northern Quebec, Canada. In addition, the Cryptosporidium sp. detected in the harp seal is significantly different from the previously observed Cryptosporidium sp. in other seals. We confirmed the genetic distinctiveness of this Cryptosporidium genotype and the identity of the other Cryptosporidium sp. seal ssu rRNA sequences by using data from the 70-kDa heat shock protein gene. Based on phylogenetic reconstructions of both genes, it seems that either Cryptosporidium canis or C. felis are sister species to the seal associated Cryptosporidium spp. Our findings extend the range of " Cryptosporidium sp. seal" well south of the 55th parallel, add other species to the list of seals affected by Cryptosporidium sp., and highlight the presence of unrecognized population and potentially species level variation in Cryptosporidium. PMID:22017467

  13. Oceanographic features related to northern fur seal migratory movements

    NASA Astrophysics Data System (ADS)

    Ream, Rolf R.; Sterling, Jeremy T.; Loughlin, Thomas R.

    2005-03-01

    Northern fur seals breeding on the Pribilof Islands are characterized by pelagic migrations that begin each fall and last approximately eight months. Previous studies have examined the early phases of the migration with respect to timing, location, and effects of ocean surface currents on movement. We used satellite telemetry and remotely sensed satellite data to examine relationships between oceanographic features and the movements of adult female fur seals in the Bering Sea and North Pacific Ocean during early, middle and late portions of their winter migration. Physical locations of 13 female fur seals were monitored during 2002-2003, and diving data were collected on a subset of the animals. Remotely sensed data were obtained to assess sea-surface temperatures, chlorophyll a concentrations, and sea-surface height anomalies encountered by the fur seals. Data from historical pelagic collection of fur seals also were summarized to describe winter diet and the distribution of different age and sex classes of the general migration of fur seals to the eastern North Pacific. Seals departed from the Pribilof Islands in November and moved in a southeasterly direction over the continental shelf as they left the Bering Sea. Their travel routes did not follow coastal or bathymetric features as they crossed the North Pacific Ocean, but instead corresponded to complementary water movement of the Alaska Gyre and the North Pacific Current. Winter foraging areas varied geographically and were associated with eddies, the subarctic-subtropical transition region, and areas that undergo coastal mixing due to the California Current. The results indicate that fur seals may cue on a variety of oceanographic features that aid in reducing energetic expenditures and optimize foraging opportunities.

  14. Hematology and serum chemistry of harp (Phoca groenlandica) and hooded seals (Cystophora cristata) during the breeding season, in the Gulf of St. Lawrence, Canada.

    PubMed

    Boily, France; Beaudoin, Sandra; Measures, Lena N

    2006-01-01

    Standard hematologic and serum chemistry parameters were determined from 28 harp seals (Phoca groenlandica) and 20 hooded seals (Cystophora cristata) sampled from 6 March 2001 to 13 March 2001 during the breeding season. Whole blood was collected immediately postmortem from harp seal mother-pup pairs and from six hooded seal pups, and from live-captured adult hooded seals and three hooded seal pups; blood was analyzed within 24 hr at a local human hospital. A certified veterinary laboratory validated subsamples of whole blood and analyzed all serum chemistry parameters. Significant interlaboratory differences in mean values of packed cell volume (PCV) and mean cell volume (MCV) were found. Significant differences were found between samples from the five seal groups (adult male hooded seals, lactating female hooded seals, unweaned hooded seal pups; lactating female harp seals, and unweaned harp seal pups) for hematology and most serum chemistry parameters. In general, age-class influenced mean values of PCV, hemoglobin (HB), red blood cell (RBC) counts, MCV, mean cell hemoglobin (MCH), mean cell hemoglobin concentration (MCHC), and nucleated red blood cell (NRBC) counts per 100 leucocytes, but most age-related variations were species specific. Harp seal pups had significantly lower mean values of HB, PCV, MCH, and MCHC than did other seal groups, and significantly lower mean RBC counts than did hooded seal pups. Mean NRBC counts per 100 leukocytes were more than three times higher in harp seal pups than in hooded seal pups, but this difference was not statistically significant. Mean MCV were significantly lower in harp and hooded seal pups compared to those of adult harp and hooded seals. Differences in hemograms between pup species were likely because of the precocious development of hooded seal pups, which are weaned within 4 days, compared to 12 days for harp seal pups. Among adult seal groups, male hooded seals had significantly higher mean values of PCV and HB

  15. Stationary spiraling eddies in presence of polar amplification of global warming as a governing factor of ecology of Greenland seals White Sea population: results of verification study

    NASA Astrophysics Data System (ADS)

    Melentyev, K.; Chernook, V.; Melentyev, V.

    2003-04-01

    Ice-associated forms of marine mammals are representatives of a high level of fodder chains in the ocean and taxation of population number for different group, as assessment of ecology and animal welfare are the important tasks for marine biology, ecology, fishery and other application uses. Many problems create a global warming and antropogenical impact on marine and coastal ecosystem. In order to investigate ice covered Arctic Ocean and charting the number of seals were performed annual inspections onboard research aircraft PINRO "Arktika". Multi-spectral airborne and satellite observations were fulfilled regularly from Barents and White Sea to the Bering and Okhotsk Sea (1996-2002). A contemporary status of different group of sea mammals was evaluated, where number of adults and pups were checked separately. In situ observations were provided with using helicopter and icebreaker for gathering a water samples and ice cores (with following biochemical and toxicological analysis). A prevailing part of life cycle of Greenland seals (harp seal) is strongly depended from winter hydrology (water masses, stable currents, meandering fronts, stationary eddies) and closely connected with type of ice (pack, fast ice) and other parameters of ice (age, origin, salinity, ice edge.). First-year ice floes which has a specific properties and distinctive features are used by harp seals for pupping, lactation, molting, pairing and resting. Ringed seals, inversely, use for corresponding purposes only fast-ice. Different aspects of ecology, and migration features of harp seals were analyzed in frame of verification study. It was revealed a scale of influence of winter severity and wind regime, but stationary eddies in the White Sea is most effective governing factor (novelty). Following relationship " eddies - ecology of Greenland seal White Sea population " will be discussed: A) regularities of eddies formation and their spatial arrangement, temporal (seasonal and annual

  16. Seal between metal and ceramic conduits

    DOEpatents

    Underwood, Richard Paul; Tentarelli, Stephen Clyde

    2015-02-03

    A seal between a ceramic conduit and a metal conduit of an ion transport membrane device consisting of a sealing surface of ceramic conduit, a sealing surface of ceramic conduit, a single gasket body, and a single compliant interlayer.

  17. Toward an Improved Hypersonic Engine Seal

    NASA Technical Reports Server (NTRS)

    Dunlap, Patrick H., Jr.; Steinetz, Bruce M.; DeMange,Jeffrey J.; Taylor, Shawn C.

    2003-01-01

    High temperature, dynamic seals are required in advanced engines to seal the perimeters of movable engine ramps for efficient, safe operation in high heat flux environments at temperatures from 2000 to 2500 F. Current seal designs do not meet the demanding requirements for future engines, so NASA s Glenn Research Center (GRC) is developing advanced seals to overcome these shortfalls. Two seal designs and two types of seal preloading devices were evaluated in a series of compression tests at room temperature and 2000 F and flow tests at room temperature. Both seals lost resiliency with repeated load cycling at room temperature and 2000 F, but seals with braided cores were significantly more flexible than those with cores composed of uniaxial ceramic fibers. Flow rates for the seals with cores of uniaxial fibers were lower than those for the seals with braided cores. Canted coil springs and silicon nitride compression springs showed promise conceptually as potential seal preloading devices to help maintain seal resiliency.

  18. Face-Sealing Butterfly Valve

    NASA Technical Reports Server (NTRS)

    Tervo, John N.

    1992-01-01

    Valve plate made to translate as well as rotate. Valve opened and closed by turning shaft and lever. Interactions among lever, spring, valve plate, and face seal cause plate to undergo combination of translation and rotation so valve plate clears seal during parts of opening and closing motions.

  19. Refractory Glass Seals for SOFC

    SciTech Connect

    Chou, Y. S.; Stevenson, Jeffry W.

    2011-07-01

    One of the critical challenges facing planar solid oxide fuel cell (SOFC) technology is the need for reliable sealing technology. Seals must exhibit long-term stability and mechanical integrity in the high temperature SOFC environment during normal and transient operation. Several different approaches for sealing SOFC stacks are under development, including glass or glass-ceramic seals, metallic brazes, and compressive seals. Among glass seals, rigid glass-ceramics, self-healing glass, and composite glass approaches have been investigated under the SECA Core Technology Program. The U.S. Department of Energy's Pacific Northwest National Laboratory (PNNL) has developed the refractory glass approach in light of the fact that higher sealing temperatures (e.g., 930-1000 degrees C) may enhance the ultimate in-service bulk strength and electrical conductivity of contact materials, as well as the bonding strength between contact materials and adjacent SOFC components, such as interconnect coatings and electrodes. This report summarizes the thermal, chemical, mechanical, and electrical properties of the refractory sealing glass.

  20. Boltless Seal for Electronic Housings

    NASA Technical Reports Server (NTRS)

    Dawe, R. H.; Evans, J. T.

    1982-01-01

    Spring clips seal housings for electronic circuitry, preventing electromagnetic interference from entering or leaving housings. Clips also keep dust out of housing. Since no bolts are used, housing can be opened quickly; unlike bolts, clips can be used on thin-walled housing. Seal was developed for an X-band array amplifier.