Science.gov

Sample records for advanced higher efficiency

  1. Advanced liquid cooling in HCPVT systems to achieve higher energy efficiencies

    NASA Astrophysics Data System (ADS)

    Zimmermann, S.; Helmers, H.; Tiwari, M. K.; Escher, W.; Paredes, S.; Neves, P.; Poulikakos, D.; Wiesenfarth, M.; Bett, A. W.; Michel, B.

    2013-09-01

    The benefits of advanced thermal packaging are demonstrated through a receiver package consisting of a monolithic interconnected module (MIM) which is directly attached to a high performance microchannel heat sink. Those packages can be applied in high-concentration photovoltaic systems and the generated heat can be used in addition to the electrical power output (CPVT systems). Thus, the total energy efficiency of the system increases significantly. A detailed exergy analysis of the receiver power output underscores the advantages of the new cooling approach.

  2. Advanced DC/DC Converters Towards Higher Volumetric Efficiencies For Space Applications

    NASA Technical Reports Server (NTRS)

    Shaw, Harry; Shue, Jack; Liu, David; Wang, Bright; Plante, Jeanette

    2005-01-01

    A new emphasis on planetary exploration by NASA drives the need for small, high power DC/DC converters which are functionally modular. NASA GSFC and other government space organizations are supporting technology development in the DC/DC converter area to both meet new needs and to promote more sources of supply. New technologies which enable miniaturization such as embedded passive technologies and thermal management using high thermal conductivity materials are features of the new designs. Construction of some simple DC/DC converter core circuits using embedded components was found to be successful for increasing volumetric efficiency to 37 W/inch. The embedded passives were also able to perform satisfactorily in this application in cryogenic temperatures.

  3. Unexploited Efficiencies in Higher Education

    ERIC Educational Resources Information Center

    Eyring, Henry C.

    2011-01-01

    In "Unexploited Efficiencies in Higher Education," Henry C. Eyring, a junior majoring in Economics at Brigham Young University-Idaho, argues that one way that the U.S. can compete globally in college attainment is to decrease cost-per-graduate. He explains how many stakeholders in higher education stand to benefit from unexploited…

  4. On Advanced Knowledge and Higher Education

    ERIC Educational Resources Information Center

    Chen, Hongjie

    2009-01-01

    Advanced knowledge is the basis for higher education, but less research on higher education deals with it. The essay elaborates on the major point in several ways: first, the practice-oriented higher education research tends to ignore advanced knowledge; secondly, higher education shall never turn a blind eye to advanced knowledge due to their…

  5. Driving Efficiency in Higher Education

    ERIC Educational Resources Information Center

    Walz, Dru Anne

    2003-01-01

    For many industries, the economic crunch of the past few years has brought about an increased focus on controlling expenses, gaining process efficiencies and finding a competitive advantage in an overcrowded market. While community colleges are not immune to these challenges, they are limited in how they are able to respond. Unlike other areas of…

  6. Advanced Science for Employment and Higher Education.

    ERIC Educational Resources Information Center

    Gadd, Ken

    1998-01-01

    Compares the extent to which two types of advanced level qualifications, General Certificate of Education (GCE) A-levels and General National Vocational Qualification (GNVQ) advanced science, meet the needs of employers and tutors of science courses in higher education. (Author/CCM)

  7. Leveraging Higher Education Consortia for Institutional Advancement

    ERIC Educational Resources Information Center

    Burley, Diana; Gnam, Cathy; Newman, Robin; Straker, Howard; Babies, Tanika

    2012-01-01

    Purpose: The purpose of this paper is to explore conceptually the role of higher education consortia in facilitating the operational advancement of member institutions, and in enabling their development as learning organizations in a changing and competitive higher education environment. Design/methodology/approach: This article synthesizes the…

  8. Retrofitting the 5045 Klystron for Higher Efficiency

    SciTech Connect

    Jensen, Aaron; Fazio, Michael; Haase, Andy; Jongewaard, Erik; Kemp, Mark; Neilson, Jeff

    2015-04-15

    The 5045 klystron has been in production and accelerating particles at SLAC National Accelerator Laboratory for over 25 years. Although the design has undergone some changes there are still significant opportunities for improvement in performance. Retrofitting the 5045 for higher efficiencies and a more mono-energetic spent beam profile is presented.

  9. Mapping Efficient Communication Networks in Higher Education.

    ERIC Educational Resources Information Center

    Lubinescu, E. S.; Prabhu, R. P.; Terheggen, S. L.

    Some perspectives are presented that help explain communication networks in institutions of higher education and the factors that impede or facilitate their efficient functioning. The first theory that informs this exploration is that of K. Wieck (1969), which states that communication can be viewed through the lens of "sensemaking." The…

  10. Comparison of advanced DSP techniques for spectrally efficient Nyquist-WDM signal generation using digital FIR filters at transmitters based on higher-order modulation formats

    NASA Astrophysics Data System (ADS)

    Weng, Yi; Wang, Junyi; Pan, Zhongqi

    2016-02-01

    To support the ever-increasing demand for high-speed optical communications, Nyquist spectral shaping serves as a promising technique to improve spectral efficiency (SE) by generating near-rectangular spectra with negligible crosstalk and inter-symbol interference in wavelength-division-multiplexed (WDM) systems. Compared with specially-designed optical methods, DSP-based electrical filters are more flexible as they can generate different filter shapes and modulation formats. However, such transmitter-side pre-filtering approach is sensitive to the limited taps of finite-impulse-response (FIR) filter, for the complexity of the required DSP and digital-to-analog converter (DAC) is limited by the cost and power consumption of optical transponder. In this paper, we investigate the performance and complexity of transmitter-side FIR-based DSP with polarization-division-multiplexing (PDM) high-order quadrature-amplitude-modulation (QAM) formats. Our results show that Nyquist 64-QAM, 16-QAM and QPSK WDM signals can be sufficiently generated by digital FIR filters with 57, 37, and 17 taps respectively. Then we explore the effects of the required spectral pre-emphasis, bandwidth and resolution on the performance of Nyquist-WDM systems. To obtain negligible OSNR penalty with a roll-off factor of 0.1, two-channel-interleaved DAC requires a Gaussian electrical filter with the bandwidth of 0.4-0.6 times of the symbol rate for PDM-64QAM, 0.35-0.65 times for PDM-16QAM, and 0.3-0.8 times for PDM-QPSK, with required DAC resolutions as 8, 7, 6 bits correspondingly. As a tradeoff, PDM-64QAM can be a promising candidate for SE improvement in next-generation optical metro networks.

  11. Advanced, Energy Efficient Shelter Systems

    DTIC Science & Technology

    2012-03-02

    Development Analysis, M&S Thermal Barriers Large Shelter Efficiency System Integration Follow-On Demonstrations Lessons Learned from Initial...UNCLASSIFIED 13 Technology Development: Thermal Barriers Objective: Address the enduring challenge of developing a thermal insulation for shelter systems

  12. Advanced high efficiency concentrator cells

    SciTech Connect

    Gale, R. . Varian Research Center)

    1992-06-01

    This report describes research to develop the technology needed to demonstrate a monolithic, multijunction, two-terminal, concentrator solar cell with a terrestrial power conversion efficiency greater than 35%. Under three previous subcontracts, Varian developed many of the aspects of a technology needed to fabricate very high efficiency concentrator cells. The current project was aimed at exploiting the new understanding of high efficiency solar cells. Key results covered in this report are as follows. (1) A 1.93-eV AlGaAs/1.42-eV GaAs metal-interconnected cascade cell was manufactured with a one-sun efficiency at 27.6% at air mass 1.5 (AM1.5) global. (2) A 1.0eV InGaAs cell was fabricated on the reverse'' side of a low-doped GaAs substrate with a one-sun efficiency of 2.5% AM1.5 diffuse and a short-circuit current of 14.4 mA/cm{sup 2}. (3) Small-scale manufacturing of GaAs p/n concentrator cells was attempted and obtained an excellent yield of high-efficiency cells. (4) Grown-in tunnel junction cell interconnects that are transparent and thermally stable using C and Si dopants were developed. 10 refs.

  13. Advanced Energy Efficient Roof System

    SciTech Connect

    Jane Davidson

    2008-09-30

    Energy consumption in buildings represents 40 percent of primary U.S. energy consumption, split almost equally between residential (22%) and commercial (18%) buildings.1 Space heating (31%) and cooling (12%) account for approximately 9 quadrillion Btu. Improvements in the building envelope can have a significant impact on reducing energy consumption. Thermal losses (or gains) from the roof make up 14 percent of the building component energy load. Infiltration through the building envelope, including the roof, accounts for an additional 28 percent of the heating loads and 16 percent of the cooling loads. These figures provide a strong incentive to develop and implement more energy efficient roof systems. The roof is perhaps the most challenging component of the building envelope to change for many reasons. The engineered roof truss, which has been around since 1956, is relatively low cost and is the industry standard. The roof has multiple functions. A typical wood frame home lasts a long time. Building codes vary across the country. Customer and trade acceptance of new building products and materials may impede market penetration. The energy savings of a new roof system must be balanced with other requirements such as first and life-cycle costs, durability, appearance, and ease of construction. Conventional residential roof construction utilizes closely spaced roof trusses supporting a layer of sheathing and roofing materials. Gypsum board is typically attached to the lower chord of the trusses forming the finished ceiling for the occupied space. Often in warmer climates, the HVAC system and ducts are placed in the unconditioned and otherwise unusable attic. High temperature differentials and leaky ducts result in thermal losses. Penetrations through the ceilings are notoriously difficult to seal and lead to moisture and air infiltration. These issues all contribute to greater energy use and have led builders to consider construction of a conditioned attic. The

  14. Powertrain Materials: The Road to Higher Efficiencies

    SciTech Connect

    2016-05-05

    Advanced powertrain materials are critical for automakers to meet new fuel economy standards. Researchers at the Department of Energy’s Oak Ridge National Laboratory are working with industry to develop new propulsion materials that offer improved performance at lower costs.

  15. Powertrain Materials: The Road to Higher Efficiencies

    ScienceCinema

    None

    2016-10-19

    Advanced powertrain materials are critical for automakers to meet new fuel economy standards. Researchers at the Department of Energy’s Oak Ridge National Laboratory are working with industry to develop new propulsion materials that offer improved performance at lower costs.

  16. Advanced high efficiency wraparound contact solar cell

    NASA Technical Reports Server (NTRS)

    Scott-Monck, J. A.; Uno, F. M.; Thornhill, J. W.

    1977-01-01

    A significant advancement in the development of thin high efficiency wraparound contact silicon solar cells has been made by coupling space and terrestrial processing procedures. Although this new method for fabricating cells has not been completely reduced to practice, some of the initial cells have delivered over 20 mW/sq cm when tested at 25 C under AMO intensity. This approach not only yields high efficiency devices, but shows promise of allowing complete freedom of choice in both the location and size of the wraparound contact pad area

  17. Advanced high efficiency wraparound contact solar cell

    NASA Technical Reports Server (NTRS)

    Scott-Monck, J. A.; Uno, F. M.; Thornhill, J. W.

    1977-01-01

    A significant advancement in the development of thin high efficiency wraparound contact silicon solar cells has been made by coupling space and terrestrial processing procedures. Although this new method for fabricating cells has not been completely reduced to practice, some of the initial cells have delivered over 20 mW/sq cm when tested at 25 C under AMO intensity. This approach not only yields high efficiency devices, but shows promise of allowing complete freedom of choice in both the location and size of the wraparound contact pad area.

  18. Advancing Knowledge in Higher Education: Universities in Turbulent Times

    ERIC Educational Resources Information Center

    Fitzgerald, Tanya, Ed.

    2014-01-01

    Over the last three decades, higher education institutions have experienced massive changes. In particular, institutions of higher education have been positioned as a means to contribute to the knowledge economy and gain a level of competitive advantage in the global marketplace. "Advancing Knowledge in Higher Education: Universities in…

  19. Technical Efficiency and Productivity for Higher Education Institutions in Sweden

    ERIC Educational Resources Information Center

    Andersson, C.; Antelius, J.; Månsson, J.; Sund, K.

    2017-01-01

    This study investigates technical efficiency and productivity for Swedish higher education institutions (HEIs). One identified problem in previous research concerns adjusting efficiency scores for input quality. This problem is avoided using grades from upper-secondary schools. A second problem concerns heterogeneity with respect to subjects and…

  20. The Efficiency and Effectiveness of Teaching in Higher Education.

    ERIC Educational Resources Information Center

    Piper, David Warren, Ed.

    Twenty papers originally presented at a conference organized by London University on "Efficiency in Teaching Methods in Higher Education" are presented. After an introduction by David Warren Piper, the following papers are included: "Old Prejudices and New Management Tools" (Gerald Fowler); "Efficiency in Higher…

  1. Planning and Management for Excellence and Efficiency in Higher Education.

    ERIC Educational Resources Information Center

    United Nations Educational, Scientific, and Cultural Organization, Paris (France).

    This round table discussion involved some 50 participants and seven panelists and focused on planning and management for excellence and efficiency in higher education. Basic issues or problems facing higher education were identified including coping with increasing student numbers, raising the quality of teaching, training and research programs,…

  2. Higher Education and Efficiency in Europe: A Comparative Analysis

    ERIC Educational Resources Information Center

    Sánchez-Pérez, Rosario

    2012-01-01

    This paper analyses the efficiency of higher education in equalizing the feasible wages obtained for men and women in the labour market. To do that, It is estimated two stochastic frontiers. The first one measures the effect of higher education inside the group of men and women for six European countries. The results indicate that in Denmark,…

  3. Improved Magnetic Field Generation Efficiency and Higher Temperature Spheromak Plasmas

    SciTech Connect

    Wood, R D; Hill, D N; McLean, H S; Hooper, E B; Hudson, B F; Moller, J M; Romero-Talamas, C A

    2008-09-15

    New understanding of the mechanisms governing the observed magnetic field generation limits on the sustained spheromak physics experiment has been obtained. Extending the duration of magnetic helicity injection during the formation of a spheromak and optimizing the ratio of injected current to bias flux produce higher magnetic field plasmas with record spheromak electron temperatures. To explore magnetic field buildup efficiency limits, the confinement region geometry was varied resulting in improved field buildup efficiencies.

  4. Report of the Texas Higher Education Coordinating Board on Higher Education Cost Efficiencies to the Governor

    ERIC Educational Resources Information Center

    Texas Higher Education Coordinating Board, 2010

    2010-01-01

    This document contains the estimated impacts of the recommendations of the Texas Higher Education Coordinating Board on Higher Education Cost Efficiencies and descriptions of current practices in other states that are representative of each recommendation. The estimates provide a reasonable expectation of impacts within an order of magnitude of…

  5. Energy Efficiency of Higher Education Buildings: A Case Study

    ERIC Educational Resources Information Center

    Soares, Nelson; Pereira, Luísa Dias; Ferreira, João; Conceição, Pedro; da Silva, Patrícia Pereira

    2015-01-01

    Purpose: This paper aims to propose an energy efficiency plan (with technical and behavioural improvement measures) for a Portuguese higher education building--the Teaching Building of the Faculty of Economics of the University of Coimbra (FEUC). Design/methodology/approach: The study was developed in the context of both the "Green…

  6. Market-Based Higher Education: Does Colorado's Voucher Model Improve Higher Education Access and Efficiency?

    ERIC Educational Resources Information Center

    Hillman, Nicholas W.; Tandberg, David A.; Gross, Jacob P. K.

    2014-01-01

    In 2004, Colorado introduced the nation's first voucher model for financing public higher education. With state appropriations now allocated to students, rather than institutions, state officials expect this model to create cost efficiencies while also expanding college access. Using difference-in-difference regression analysis, we find limited…

  7. Second Generation Advanced Reburning for High Efficiency NOx Control

    SciTech Connect

    Roy Payne; Lary Swanson; Antonio Marquez; Ary Chang; Vladimir M. Zamansky; Pete M. Maly; Vitali V. Lissianski

    2000-09-30

    This project is designed to develop a family of novel NO{sub x} control technologies, called Second Generation Advanced Reburning (SGAR) which has the potential to achieve 90+% NO{sub x} control in coal-fired boilers at a significantly lower cost than SCR. The twelfth reporting period in Phase II (July 3-October 15, 2000) included design validation AR-Lean tests (Task No.2.6) in the 10 x 10{sup 6} Btu/hr Tower Furnace. The objective of tests was to determine the efficiency of AR-Lean at higher than optimum OFA/N-Agent injection temperatures in large pilot-scale combustion facility. Tests demonstrated that co-injection of urea with overfire air resulted in NO{sub x} reduction. However, observed NO{sub x} reduction was smaller than that under optimum conditions.

  8. Second Generation Advanced Reburning for High Efficiency NOx Control

    SciTech Connect

    Vladimir Zamansky

    2000-06-30

    This project is designed to develop a family of novel NO{sub x} control technologies, called Second Generation Advanced Reburning (SGAR) which has the potential to achieve 90+ NO{sub x} control in coal-fired boilers at a significantly lower cost than SCR. The eleventh reporting period in Phase II (April 1-June 30, 2000) included design validation AR-Lean tests (Task 2.6) in the 10 x 10{sup 6} Btu/hr Tower Furnace. The objective of tests was to determine the efficiency of AR-Lean at higher than optimum OFA/N-Agent injection temperatures in large pilot-scale combustion facility. Tests demonstrated that co-injection of urea with overfire air resulted in NO{sub x} reduction. However, observed NO{sub x} reduction was smaller than that under optimum conditions.

  9. Advanced Chemical Design for Efficient Lignin Bioconversion

    DOE PAGES

    Xie, Shangxian; Sun, Qining; Pu, Yunqiao; ...

    2017-01-30

    Here, lignin depolymerization mainly involves redox reactions relying on the effective electron transfer. Even though electron mediators were previously used for delignification of paper pulp, no study has established a bioprocess to fragment and solubilize the lignin with an effective laccase–mediator system, in particular, for subsequent microbial bioconversion. Efficient lignin depolymerization was achieved by screening proper electron mediators with laccase to attain a nearly 6-fold increase of kraft lignin solubility compared to the control kraft lignin without laccase treatment. Chemical analysis suggested the release of a low molecular weight fraction of kraft lignin into the solution phase. Moreover, NMR analysismore » revealed that an efficient enzyme–mediator system can promote the lignin degradation. More importantly, the fundamental mechanisms guided the development of an efficient lignin bioconversion process, where solubilized lignin from laccase–HBT treatment served as a superior substrate for bioconversion by Rhodococcus opacus PD630. The cell growth was increased by 106 fold, and the lipid titer reached 1.02 g/L. Overall, the study has manifested that an efficient enzyme–mediator–microbial system can be exploited to establish a bioprocess to solubilize lignin, cleave lignin linkages, modify the structure, and produce substrates amenable to bioconversion.« less

  10. Advanced chemical design for efficient lignin bioconversion

    SciTech Connect

    Xie, Shangxian; Sun, Qining; Pu, Yunqiao; Lin, Furong; Sun, Su; Wang, Xin; Ragauskas, Arthur J.; Yuan, Joshua S.

    2016-12-22

    Here, lignin depolymerization mainly involves redox reactions relying on the effective electron transfer. Even though electron mediators were previously used for delignification of paper pulp, no study has established a bioprocess to fragment and solubilize the lignin with an effective laccase–mediator system, in particular, for subsequent microbial bioconversion. Efficient lignin depolymerization was achieved by screening proper electron mediators with laccase to attain a nearly 6-fold increase of kraft lignin solubility compared to the control kraft lignin without laccase treatment. Chemical analysis suggested the release of a low molecular weight fraction of kraft lignin into the solution phase. Moreover, NMR analysis revealed that an efficient enzyme–mediator system can promote the lignin degradation. More importantly, the fundamental mechanisms guided the development of an efficient lignin bioconversion process, where solubilized lignin from laccase–HBT treatment served as a superior substrate for bioconversion by Rhodococcus opacus PD630. The cell growth was increased by 106 fold, and the lipid titer reached 1.02 g/L. Overall, the study has manifested that an efficient enzyme–mediator–microbial system can be exploited to establish a bioprocess to solubilize lignin, cleave lignin linkages, modify the structure, and produce substrates amenable to bioconversion.

  11. Recent Advances in Higher-Order, Multimodal, Biomedical Imaging Agents.

    PubMed

    Rieffel, James; Chitgupi, Upendra; Lovell, Jonathan F

    2015-09-16

    Advances in biomedical imaging have spurred the development of integrated multimodal scanners, usually capable of two simultaneous imaging modes. The long-term vision of higher-order multimodality is to improve diagnostics or guidance through the analysis of complementary, data-rich, co-registered images. Synergies achieved through combined modalities could enable researchers to better track diverse physiological and structural events, analyze biodistribution and treatment efficacy, and compare established and emerging modalities. Higher-order multimodal approaches stand to benefit from molecular imaging probes and, in recent years, contrast agents that have hypermodal characteristics have increasingly been reported in preclinical studies. Given the chemical requirements for contrast agents representing various modalities to be integrated into a single entity, the higher-order multimodal agents reported so far tend to be of nanoparticulate form. To date, the majority of reported nanoparticles have included components that are active for magnetic resonance. Herein, recent progress in higher-order multimodal imaging agents is reviewed, spanning a range of material and structural classes, and demonstrating utility in three (or more) imaging modalities.

  12. Final Scientific Report - Wireless and Sensing Solutions Advancing Industrial Efficiency

    SciTech Connect

    Budampati, Rama; McBrady, Adam; Nusseibeh, Fouad

    2009-09-28

    The project team's goal for the Wireless and Sensing Solution Advancing Industrial Efficiency award (DE-FC36-04GO14002) was to develop, demonstrate, and test a number of leading edge technologies that could enable the emergence of wireless sensor and sampling systems for the industrial market space. This effort combined initiatives in advanced sensor development, configurable sampling and deployment platforms, and robust wireless communications to address critical obstacles in enabling enhanced industrial efficiency.

  13. Efficient multiple time-stepping algorithms of higher order

    NASA Astrophysics Data System (ADS)

    Demirel, Abdullah; Niegemann, Jens; Busch, Kurt; Hochbruck, Marlis

    2015-03-01

    Multiple time-stepping (MTS) algorithms allow to efficiently integrate large systems of ordinary differential equations, where a few stiff terms restrict the timestep of an otherwise non-stiff system. In this work, we discuss a flexible class of MTS techniques, based on multistep methods. Our approach contains several popular methods as special cases and it allows for the easy construction of novel and efficient higher-order MTS schemes. In addition, we demonstrate how to adapt the stability contour of the non-stiff time-integration to the physical system at hand. This allows significantly larger timesteps when compared to previously known multistep MTS approaches. As an example, we derive novel predictor-corrector (PCMTS) schemes specifically optimized for the time-integration of damped wave equations on locally refined meshes. In a set of numerical experiments, we demonstrate the performance of our scheme on discontinuous Galerkin time-domain (DGTD) simulations of Maxwell's equations.

  14. Considerations for higher efficiency and productivity in research activities.

    PubMed

    Forero, Diego A; Moore, Jason H

    2016-01-01

    There are several factors that are known to affect research productivity; some of them imply the need for large financial investments and others are related to work styles. There are some articles that provide suggestions for early career scientists (PhD students and postdocs) but few publications are oriented to professors about scientific leadership. As academic mentoring might be useful at all levels of experience, in this note we suggest several key considerations for higher efficiency and productivity in academic and research activities. More research is needed into the main work style features that differentiate highly productive scientists and research groups, as some of them could be innate and others could be transferable. As funding agencies, universities and research centers invest large amounts of money in order to have a better scientific productivity, a deeper understanding of these factors will be of high academic and societal impact.

  15. Advanced component technologies for energy-efficient turbofan engines

    NASA Technical Reports Server (NTRS)

    Saunders, N. T.

    1980-01-01

    The paper reviews NASA's Energy Efficient Engine Project which was initiated to provide the advanced technology base for a new generation of fuel-conservative engines for introduction into airline service by the late 1980s. Efforts in this project are directed at advancing engine component and systems technologies to a point of demonstrating technology-readiness by 1984. Early results indicate high promise in achieving most of the goals established in the project.

  16. Data Protection Issues in Higher Education with Technological Advancements

    ERIC Educational Resources Information Center

    McKelvey, Nigel

    2014-01-01

    Adhering to laws whilst working or studying in an educational establishment is often fraught with challenges. The Irish Data Protection Act 1988 (Amendment 2003) strives to protect the individual where their personal data is potentially being abused. The advancements in technologies have facilitated educational establishments by improving…

  17. A Case for Advanced Skills and Employability in Higher Education.

    ERIC Educational Resources Information Center

    Holmes, Alison; Miller, Stuart

    2000-01-01

    Case Studies to Advance Skills and Employability is a project designed to introduce a vocational dimension into academic curriculum. Key employability skills are developed as students work on real-life case situations in such areas as public sculpture, waste management, human organizations, and environmental issues. (SK)

  18. Imagining STEM Higher Education Futures: Advancing Human Well-Being

    ERIC Educational Resources Information Center

    Walker, Melanie

    2015-01-01

    The paper explores a conceptual approach to the question of what it means to provide a university education that addresses equity, and encourages the formation of STEM graduates oriented to public-good values and with commitments to making professional contributions to society which will advance human well-being. It considers and rejects…

  19. High efficiency fuel cell/advanced turbine power cycles

    SciTech Connect

    Morehead, H.

    1995-10-19

    An outline of the Westinghouse high-efficiency fuel cell/advanced turbine power cycle is presented. The following topics are discussed: The Westinghouse SOFC pilot manufacturing facility, cell scale-up plan, pressure effects on SOFC power and efficiency, sureCell versus conventional gas turbine plants, sureCell product line for distributed power applications, 20 MW pressurized-SOFC/gas turbine power plant, 10 MW SOFC/CT power plant, sureCell plant concept design requirements, and Westinghouse SOFC market entry.

  20. Second Generation Advanced Reburning for High Efficiency NOx Control

    SciTech Connect

    Vladimir M. Zamansky; Peter M. Maly; Vitali V. Lissianski

    1999-06-30

    This project is designed to develop a family of novel NO{sub x} control technologies, called Second Generation Advanced Reburning which has the potential to achieve 90+ NO{sub x} control in coal fired boilers at a significantly lower cost than Selective Catalytic Reduction. The seventh reporting period in Phase II (April 1-June 30, 1999) included experimental activities and combined chemistry-mixing modeling on advanced gas reburning. The goal of combustion tests was to determine the efficiency of advanced reburning using coal as the reburning fuel. Tests were conducted in Boiler Simulator Facility (BSF). Several coals were tested. The modeling effort was focused on the description of N-agent injection along with overfire air. Modeling identified process parameters that can be used to optimize the AR-Lean process.

  1. Advanced life support systems in lunar and Martian environments utilizing a higher plant based engineering paradigm

    NASA Technical Reports Server (NTRS)

    Chamberland, Dennis

    1992-01-01

    The paper describes a higher-plant-based engineering paradigm for advanced life support in a Controlled Ecological Life Support System (CELSS) on the surface of the moon or Mars, called the CELSS Breadboard Project, designed at John F. Kennedy Space Center. Such a higher-plant-based system would use the plants for a direct food source, gas exchange, water reclamation, and plant residuals in a complex biological resource recovery scheme. The CELSS Breadboard Project utilizes a 'breadboard' approach of developing independent systems that are evaluated autonomously and are later interconnected. Such a scheme will enable evaluation of life support system methodologies tested for their efficiency in a life support system for habitats on the moon or Mars.

  2. [Advance in producing higher alcohols by microbial cell factories].

    PubMed

    Liu, Zengran; Zhang, Guangyi

    2013-10-01

    Higher alcohols have a high energy density, low hygroscopicity and can be mixed with gasoline at any ratio. It is the trend to replace fossil fuels with biofuels produced via microbial fermentation of renewable resources. We reviewed the progress in the development of engineered Saccharomyces cerevisiae and Escherichia coli that can produce higher alcohols, as well as the related technology platforms. We mainly focused on the construction of CoA-dependent pathways and alpha-keto acid mediated non-fermentative pathways, analyzed their respective characteristics, and summarized the construction strategies. The problems to be solved and future research direction were also discussed.

  3. Thermal management concepts for higher efficiency heavy vehicles.

    SciTech Connect

    Wambsganss, M. W.

    1999-05-19

    Thermal management is a cross-cutting technology that directly or indirectly affects engine performance, fuel economy, safety and reliability, aerodynamics, driver/passenger comfort, materials selection, emissions, maintenance, and component life. This review paper provides an assessment of thermal management for large trucks, particularly as it impacts these features. Observations arrived at from a review of the state of the art for thermal management for over-the-road trucks are highlighted and commented on. Trends in the large truck industry, pertinent engine truck design and performance objectives, and the implications of these relative to thermal management, are presented. Finally, new thermal management concepts for high efficiency vehicles are described.

  4. Lightweight, Efficient Power Converters for Advanced Turboelectric Aircraft Propulsion Systems

    NASA Technical Reports Server (NTRS)

    Hennessy, Michael J.

    2014-01-01

    NASA is investigating advanced turboelectric aircraft propulsion systems that use superconducting motors to drive multiple distributed turbofans. Conventional electric motors are too large and heavy to be practical for this application; therefore, superconducting motors are required. In order to improve aircraft maneuverability, variable-speed power converters are required to throttle power to the turbofans. The low operating temperature and the need for lightweight components that place a minimum of additional heat load on the refrigeration system open the possibility of incorporating extremely efficient cryogenic power conversion technology. This Phase II project is developing critical components required to meet these goals.

  5. Comparison of advanced cooling technologies efficiency depending on outside temperature

    SciTech Connect

    Blaise Hamanaka; Haihua Zhao; Phil Sharpe

    2009-09-01

    In some areas, water availability is a serious problem during the summer and could disrupt the normal operation of thermal power plants which needs large amount of water to operate. Moreover, when water quantities are sufficient, there can still be problem created by the waste heat rejected into the water which is regulated in order to limit the impact of thermal pollution on the environment. All these factors can lead to a decrease of electricity production during the summer and during peak hours, when electricity is the most needed. In order to deal with these problems, advanced cooling technologies have been developed and implemented to reduce water consumption and withdrawals but with an effect in the plant efficiency. This report aims at analyzing the efficiency of several cooling technologies with a fixed power plant design and so to produce a reference to be able to compare them.

  6. Improved photovoltaic battery chargers for lower maintenance and higher efficiency

    NASA Astrophysics Data System (ADS)

    Millner, A. R.

    A novel system controller has been developed and tested, suitable for many remote lead acid battery charging applications. The state of charge of the battery is estimated by integrating the battery current, while the optimum amount of equalization charge is simultaneously estimated. The results are bounded by a temperature compensated voltage limit algorithm to ensure convergence of the model to the actual battery being controlled. The battery therefore requires less watering and will probably last longer. The charging mode is further enhanced by a modular high-efficiency switching DC to DC regulator between the source and the battery, driven by a maximum power controller. This allows the photovoltaic array to operate at its optimum voltage, regardless of the battery voltage, enhancing the system output during design-limiting winter months.

  7. Successful Fund Raising for Higher Education. The Advancement of Learning. Series on Higher Education.

    ERIC Educational Resources Information Center

    Rhodes, Frank H. T., Ed.

    This book presents 11 case studies of effective partnership fundraising at various institutions of higher education. After a foreword by Peter McE. Buchanan and a preface and introduction by Frank H.T. Rhodes, chapters are: (1) Successful Fund Rising at a Large Private Research University: Cornell University (Frank H. T. Rhodes and Inge T.…

  8. The Impact of Attaining the Welsh Baccalaureate Advanced Diploma on Academic Performance in Bioscience Higher Education

    ERIC Educational Resources Information Center

    Yhnell, Emma; Wood, Heather; Baker, Mathew; Amici-Dargan, Sheila; Taylor, Chris; Randerson, Peter; Shore, Andrew

    2016-01-01

    Since the introduction of the Welsh Baccalaureate Advanced Diploma Qualification (WBQ) in 2003, an increasing number of students are applying to higher education institutions (HEIs) with this qualification. The advanced-level WBQ is regarded as equivalent to one General Certificate of Education A-Level (GCE A-Level). This study assesses the impact…

  9. Advancing Higher Education with Mobile Learning Technologies: Cases, Trends, and Inquiry-Based Methods

    ERIC Educational Resources Information Center

    Keengwe, Jared, Ed.; Maxfield, Marian B., Ed.

    2015-01-01

    Rapid advancements in technology are creating new opportunities for educators to enhance their classroom techniques with digital learning resources. Once used solely outside of the classroom, smartphones, tablets, and e-readers are becoming common in many school settings. "Advancing Higher Education with Mobile Learning Technologies: Cases,…

  10. An efficient time advancing strategy for energy-preserving simulations

    NASA Astrophysics Data System (ADS)

    Capuano, F.; Coppola, G.; de Luca, L.

    2015-08-01

    Energy-conserving numerical methods are widely employed within the broad area of convection-dominated systems. Semi-discrete conservation of energy is usually obtained by adopting the so-called skew-symmetric splitting of the non-linear convective term, defined as a suitable average of the divergence and advective forms. Although generally allowing global conservation of kinetic energy, it has the drawback of being roughly twice as expensive as standard divergence or advective forms alone. In this paper, a general theoretical framework has been developed to derive an efficient time-advancement strategy in the context of explicit Runge-Kutta schemes. The novel technique retains the conservation properties of skew-symmetric-based discretizations at a reduced computational cost. It is found that optimal energy conservation can be achieved by properly constructed Runge-Kutta methods in which only divergence and advective forms for the convective term are used. As a consequence, a considerable improvement in computational efficiency over existing practices is achieved. The overall procedure has proved to be able to produce new schemes with a specified order of accuracy on both solution and energy. The effectiveness of the method as well as the asymptotic behavior of the schemes is demonstrated by numerical simulation of Burgers' equation.

  11. Data Envelopment Analysis and Its Application to the Measurement of Efficiency in Higher Education

    ERIC Educational Resources Information Center

    Johnes, Jill

    2006-01-01

    The purpose of this paper is to examine the possibility of measuring efficiency in the context of higher education. The paper begins by exploring the advantages and drawbacks of the various methods for measuring efficiency in the higher education context. The ease with which data envelopment analysis (DEA) can handle multiple inputs and multiple…

  12. Advanced proton-exchange materials for energy efficient fuel cells.

    SciTech Connect

    Fujimoto, Cy H.; Grest, Gary Stephen; Hickner, Michael A.; Cornelius, Christopher James; Staiger, Chad Lynn; Hibbs, Michael R.

    2005-12-01

    The ''Advanced Proton-Exchange Materials for Energy Efficient Fuel Cells'' Laboratory Directed Research and Development (LDRD) project began in October 2002 and ended in September 2005. This LDRD was funded by the Energy Efficiency and Renewable Energy strategic business unit. The purpose of this LDRD was to initiate the fundamental research necessary for the development of a novel proton-exchange membranes (PEM) to overcome the material and performance limitations of the ''state of the art'' Nafion that is used in both hydrogen and methanol fuel cells. An atomistic modeling effort was added to this LDRD in order to establish a frame work between predicted morphology and observed PEM morphology in order to relate it to fuel cell performance. Significant progress was made in the area of PEM material design, development, and demonstration during this LDRD. A fundamental understanding involving the role of the structure of the PEM material as a function of sulfonic acid content, polymer topology, chemical composition, molecular weight, and electrode electrolyte ink development was demonstrated during this LDRD. PEM materials based upon random and block polyimides, polybenzimidazoles, and polyphenylenes were created and evaluated for improvements in proton conductivity, reduced swelling, reduced O{sub 2} and H{sub 2} permeability, and increased thermal stability. Results from this work reveal that the family of polyphenylenes potentially solves several technical challenges associated with obtaining a high temperature PEM membrane. Fuel cell relevant properties such as high proton conductivity (>120 mS/cm), good thermal stability, and mechanical robustness were demonstrated during this LDRD. This report summarizes the technical accomplishments and results of this LDRD.

  13. Advancing the agent methodology to include the higher order of neutron anisotropy with accelerated solutions

    NASA Astrophysics Data System (ADS)

    Satvat, Nader

    With the development of new core designs for generation IV reactors with their complexity and newer fuel designs, the need for consideration of neutron anisotropic scattering is becoming important for enchasing the economy and reliability of these designs. The theory and accurate modeling of neutron anisotropy is one of the most important problems of the transport solution to neutron Boltzmann equation. A number of methods based on careful theoretical developments, were established to numerically determine the effect of anisotropy; some of these methods are: the spherical harmonics method, the so-called function method (FN), the discrete ordinate method, and the Monte Carlo method. The AGENT methodology, based on the method of characteristics, currently the most accurate neutron transport method, represents the state-of-the-art advanced neutronics simulation tool available for 2D, 3D, and full core modeling. The higher order of anisotropic scattering (with no limitation of the number of expansion) is introduced into the AGENT code. An extensive analysis is performed to verify and validate this new model. It is shown that anisotropic scattering is important to be considered for complex geometries due to high angular dependence of neutron flux. The first principle in physics were used to explain the effects of anisotropic scattering (at the level on particle interactions), importance in including the higher moments in flux development for the core designs of high heterogonous structure promoting biased scattering (at the level of heterogeneous reactor assemblies in 2D and 3D). This inclusion of higher order of anisotropic scattering as expected increased the complexity of the mathematical model which in turn increased the computational time. An analysis of the computational time dependence on anisotropic scattering and the method of characteristics resolution parameters are analyzed with accurate predictions of scaling to larger geometries. Finally, an accelerated

  14. Advanced Nanomaterials for High-Efficiency Solar Cells

    SciTech Connect

    Chen, Junhong

    2013-11-29

    Energy supply has arguably become one of the most important problems facing humankind. The exponential demand for energy is evidenced by dwindling fossil fuel supplies and record-high oil and gas prices due to global population growth and economic development. This energy shortage has significant implications to the future of our society, in addition to the greenhouse gas emission burden due to consumption of fossil fuels. Solar energy seems to be the most viable choice to meet our clean energy demand given its large scale and clean/renewable nature. However, existing methods to convert sun light into electricity are not efficient enough to become a practical alternative to fossil fuels. This DOE project aims to develop advanced hybrid nanomaterials consisting of semiconductor nanoparticles (quantum dots or QDs) supported on graphene for cost-effective solar cells with improved conversion efficiency for harvesting abundant, renewable, clean solar energy to relieve our global energy challenge. Expected outcomes of the project include new methods for low-cost manufacturing of hybrid nanostructures, systematic understanding of their properties that can be tailored for desired applications, and novel photovoltaic cells. Through this project, we have successfully synthesized a number of novel nanomaterials, including vertically-oriented graphene (VG) sheets, three-dimensional (3D) carbon nanostructures comprising few-layer graphene (FLG) sheets inherently connected with CNTs through sp{sup 2} carbons, crumpled graphene (CG)-nanocrystal hybrids, CdSe nanoparticles (NPs), CdS NPs, nanohybrids of metal nitride decorated on nitrogen-doped graphene (NG), QD-carbon nanotube (CNT) and QD-VG-CNT structures, TiO{sub 2}-CdS NPs, and reduced graphene oxide (RGO)-SnO{sub 2} NPs. We further assembled CdSe NPs onto graphene sheets and investigated physical and electronic interactions between CdSe NPs and the graphene. Finally we have demonstrated various applications of these

  15. Second Generation Advanced Reburning for High Efficiency NOx Control

    SciTech Connect

    Vladimir M. Zamansky; Peter M. Maly; Vitali V. Lissianski; Mark S. Sheldon; David Moyeda; Roy Payne

    2001-06-30

    This project develops a family of novel Second Generation Advanced Reburning (SGAR) NO{sub x} control technologies, which can achieve 95% NO{sub x} control in coal fired boilers at a significantly lower cost than Selective Catalytic Reduction (SCR). The conventional Advanced Reburning (AR) process integrates basic reburning and N-agent injection. The SGAR systems include six AR variants: (1) AR-Lean--injection of the N-agent and promoter along with overfire air; (2) AR-Rich--injection of N-agent and promoter into the reburning zone; (3) Multiple Injection Advanced Reburning (MIAR)--injection of N-agents and promoters both into the reburning zone and with overfire air; (4) AR-Lean + Promoted SNCR--injection of N-agents and promoters with overfire air and into the temperature zone at which Selective Non-Catalytic Reduction (SNCR) is effective; (5) AR-Rich + Promoted SNCR--injection of N-agents and promoters into the reburning zone and into the SNCR zone; and (6) Promoted Reburning + Promoted SNCR--basic or promoted reburning followed by basic or promoted SNCR process. The project was conducted in two phases over a five-year period. The work included a combination of analytical and experimental studies to confirm the process mechanisms, identify optimum process configurations, and develop a design methodology for full-scale applications. Phase I was conducted from October, 1995 to September, 1997 and included both analytical studies and tests in bench and pilot-scale test rigs. Phase I moved AR technology to Maturity Level III-Major Subsystems. Phase II is conducted over a 45 month period (October, 1997-June, 2001). Phase II included evaluation of alternative promoters, development of alternative reburning fuel and N-Agent jet mixing systems, and scale up. The goal of Phase II was to move the technology to Maturity Level I-Subscale Integrated System. Tests in combustion facility ranging in firing rate from 0.1 x 10{sup 6} to 10 x 10{sup 6} Btu/hr demonstrated the

  16. SECOND GENERATION ADVANCED REBURNING FOR HIGH EFFICIENCY NOx CONTROL

    SciTech Connect

    1998-10-30

    This project is designed to develop a family of novel NO{sub x} control technologies, called Second Generation Advanced Reburning which has the potential to achieve 90+% NO{sub x} control in coal fired boilers at a significantly lower cost than SCR. The fourth reporting period in Phase II (July 1--September 30, 1998) included experimental activities at pilot scale and combined chemistry-mixing modeling on gas reburning. The pilot scale tests reported in previous Quarterly Reports QR-2 and QR-3 were continued. The objective was to simulate furnace conditions at the Greenidge boiler No. 6 owned and operated by NYSEG and to improve the process performance. The tests were conducted in EER's Boiler Simulator Facility (BSF). During the reporting period, measurements of CO and ammonia emissions were conducted for reburn + SNCR conditions, as well as tests on the effect of sodium on NO{sub x} control efficiency. Exhaust levels of CO remained below 100 ppm in all tests. Prospective process conditions for the full-scale facility have been identified that can provide over 80% NO{sub x} reduction while maintaining ammonia slip below 4 ppm. Addition of sodium resulted in NO{sub x} control improvement of about 7-10 percentage points. The objective of modeling work was to further understand the influence of the mixing process on gas reburning and to identify factors that can increase the effectiveness of NO reduction. Modeling results demonstrated that the main features of gas reburning could be described using a detailed chemical mechanism with one-dimensional representation of mixing.

  17. Advanced Wear-resistant Nanocomposites for Increased Energy Efficiency

    SciTech Connect

    Cook, B. A.; Harringa, J. L.; Russel, A. M.

    2012-12-01

    This report summarizes the work performed by an Ames-led project team under a 4-year DOE-ITP sponsored project titled, 'Advanced Wear-resistant Nanocomposites for Increased Energy Efficiency.' The Report serves as the project deliverable for the CPS agreement number 15015. The purpose of this project was to develop and commercialize a family of lightweight, bulk composite materials that are highly resistant to degradation by erosive and abrasive wear. These materials, based on AlMgB{sub 14}, are projected to save over 30 TBtu of energy per year when fully implemented in industrial applications, with the associated environmental benefits of eliminating the burning of 1.5 M tons/yr of coal and averting the release of 4.2 M tons/yr of CO{sub 2} into the air. This program targeted applications in the mining, drilling, machining, and dry erosion applications as key platforms for initial commercialization, which includes some of the most severe wear conditions in industry. Production-scale manufacturing of this technology has begun through a start-up company, NewTech Ceramics (NTC). This project included providing technical support to NTC in order to facilitate cost-effective mass production of the wear-resistant boride components. Resolution of issues related to processing scale-up, reduction in energy intensity during processing, and improving the quality and performance of the composites, without adding to the cost of processing were among the primary technical focus areas of this program. Compositional refinements were also investigated in order to achieve the maximum wear resistance. In addition, synthesis of large-scale, single-phase AlMgB{sub 14} powder was conducted for use as PVD sputtering targets for nanocoating applications.

  18. Assessing the Research Efficiency of Higher Education Institutions in Chile: A Data Envelopment Analysis Approach

    ERIC Educational Resources Information Center

    Munoz, David Andres

    2016-01-01

    Purpose: The purpose of this paper is to assess the research efficiency of the Chilean higher education institutions (HEIs). As it has been argued in the literature, universities in Chile are far from being considered research-oriented institutions. Current governmental reforms have put pressures on the efficient use of public resources,…

  19. Efficiencies at Texas Public Institutions of Higher Education, Fiscal Year 2001-Fiscal Year 2003.

    ERIC Educational Resources Information Center

    Texas State Higher Education Coordinating Board, Austin. Div. of Research, Campus Planning and Finance.

    In response to a request of the Texas Higher Education Coordinating Board, public universities and community, technical, and state colleges in Texas were asked to provide examples of efficiencies implemented on their campuses between Fiscal Year (FY) 2001 and FY 2003. For purposes of this request, an efficiency was defined as an activity that…

  20. Efficiency and Effectiveness in Higher Education: A Report by the Universities UK Efficiency and Modernisation Task Group

    ERIC Educational Resources Information Center

    Universities UK, 2011

    2011-01-01

    Effectiveness, efficiency and value for money are central concerns for the higher education sector. In England, decisions made by the current Government will effect a radical change in the funding for teaching. Institutions will be managing a reduction in public funding for teaching and the transition to the new system of graduate contributions,…

  1. Advancement in Higher Education: The Role of Marketing in Building Philanthropic Giving

    ERIC Educational Resources Information Center

    McAlexander, James H.; Koenig, Harold F.; DuFault, Beth

    2014-01-01

    This paper empirically explores ways in which marketers of higher education can contribute to the important task of cultivating alumni philanthropy. Advancement professionals understand that philanthropy is influenced by wealth and affinity. As marketers, we anticipate that our contribution resides with investments in building affinity. Using…

  2. Pedagogy of Language Learning in Higher Education: An Introduction. Advances in Foreign Language Pedagogy, Volume 2.

    ERIC Educational Resources Information Center

    Brauer, Gerd, Ed.

    This second volume in the series "Advances in Foreign and Second Language Pedagogy" is an introduction to the pedagogy of language learning in higher education focusing on learner motivation, classroom environments, relationships for learning, and the future of language education. The book reveals numerous links to language education on the…

  3. Advanced and Higher Vocational Education in Scotland: Recontextualising the Provision of HE in FE

    ERIC Educational Resources Information Center

    Husband, Gary; Jeffrey, Michael

    2016-01-01

    This article explores the nature of provision of higher education (HE) within the further education (FE) context and discusses the prevalent cultures of delivery. Attention is drawn to the skills and pedagogic methods prevalent within FE that could offer significant benefits to the delivery of advanced-level apprenticeships and applied…

  4. Improvements in Boron Plate Coating Technology for Higher Efficiency Neutron Detection and Coincidence Counting Error Reduction

    SciTech Connect

    Menlove, Howard Olsen; Henzlova, Daniela

    2016-08-25

    This informal report presents the measurement data and information to document the performance of the advanced Precision Data Technology, Inc. (PDT) sealed cell boron-10 plate neutron detector that makes use of the advanced coating materials and procedures. In 2015, PDT changed the boron coating materials and application procedures to significantly increase the efficiency of their basic corrugated plate detector performance. A prototype sealed cell unit was supplied to LANL for testing and comparison with prior detector cells. Also, LANL had reference detector slabs from the original neutron collar (UNCL) and the new Antech UNCL with the removable 3He tubes. The comparison data is presented in this report.

  5. Energy Efficient Engine program advanced turbofan nacelle definition study

    NASA Technical Reports Server (NTRS)

    Howe, David C.; Wynosky, T. A.

    1985-01-01

    Advanced, low drag, nacelle configurations were defined for some of the more promising propulsion systems identified in the earlier Benefit/Cost Study, to assess the benefits associated with these advanced technology nacelles and formulate programs for developing these nacelles and low volume thrust reversers/spoilers to a state of technology readiness in the early 1990's. The study results established the design feasibility of advanced technology, slim line nacelles applicable to advanced technology, high bypass ratio turbofan engines. Design feasibility was also established for two low volume thrust reverse/spoiler concepts that meet or exceed the required effectiveness for these engines. These nacelle and thrust reverse/spoiler designs were shown to be applicable in engines with takeoff thrust sizes ranging from 24,000 to 60,000 pounds. The reduced weight, drag, and cost of the advanced technology nacelle installations relative to current technology nacelles offer a mission fuel burn savings ranging from 3.0 to 4.5 percent and direct operating cost plus interest improvements from 1.6 to 2.2 percent.

  6. A Cooperative Communication System for the Advancement of Safe, Effective, and Efficient Patient Care

    DTIC Science & Technology

    2015-09-01

    Award Number: W81XWH-12-C-0126 TITLE: A Cooperative Communication System for the Advancement of Safe, Effective, and Efficient Patient Care...DATES COVERED 15Aug2014 – 14Aug2015 4. TITLE AND SUBTITLE A Cooperative Communication System for the Advancement of Safe, Effective, and Efficient ...J. (2015, January). Developing a Cooperative Communication System for Safe, Effective, and Efficient Patient Care. Society of Critical Care Medicine

  7. Second Generation Advanced Reburning for High Efficiency NOx Control

    SciTech Connect

    Vladimir M. Zamansky; Pete M. Maly

    2000-03-31

    This project is designed to develop a family of novel NO{sub x} control technologies, called Second Generation Advanced Reburning (SGAR) which has the potential to achieve 90+ NO{sub x} control in coal fired boilers at a significantly lower cost than Selective Catalytic Reduction. The tenth reporting period in Phase II (January 1-March 31, 2000) included proof-of concept tests in the 10 x 10{sup 6} Btu/hr Tower Furnace. Several variants of Second Generation Advanced Reburning (SGAR) were studied, including AR-Lean, AR-Rich, reburning + SNCR, and Multiple Injection Advanced Reburning (MIAR). Tests demonstrated that the SGAR performance was the most effective under MIAR conditions achieving maximum overall NO{sub x} reduction of 96%.

  8. Efficient nanorod-based amorphous silicon solar cells with advanced light trapping

    NASA Astrophysics Data System (ADS)

    Kuang, Y.; van Lare, M. C.; Veldhuizen, L. W.; Polman, A.; Rath, J. K.; Schropp, R. E. I.

    2015-11-01

    We present a simple, low-cost, and scalable approach for the fabrication of efficient nanorod-based solar cells. Templates with arrays of self-assembled ZnO nanorods with tunable morphology are synthesized by chemical bath deposition using a low process temperature at 80 °C. The nanorod templates are conformally coated with hydrogenated amorphous silicon light absorber layers of 100 nm and 200 nm thickness. An initial efficiency of up to 9.0% is achieved for the optimized design. External quantum efficiency measurements on the nanorod cells show a substantial photocurrent enhancement both in the red and the blue parts of the solar spectrum. Key insights in the light trapping mechanisms in these arrays are obtained via a combination of three-dimensional finite-difference time-domain simulations, optical absorption, and external quantum efficiency measurements. Front surface patterns enhance the light incoupling in the blue, while rear side patterns lead to enhanced light trapping in the red. The red response in the nanorod cells is limited by absorption in the patterned Ag back contact. With these findings, we develop and experimentally realize a further advanced design with patterned front and back sides while keeping the Ag reflector flat, showing significantly enhanced scattering from the back reflector with reduced parasitic absorption in the Ag and thus higher photocurrent generation. Many of the findings in this work can serve to provide insights for further optimization of nanostructures for thin-film solar cells in a broad range of materials.

  9. The Midwestern Higher Education Compact: Advancing Education through Collaboration and Resource Sharing

    ERIC Educational Resources Information Center

    Rasmussen, Christopher J.; Horn, Aaron S.; Reinert, Leah J.

    2015-01-01

    This article summarizes the work of the Midwestern Higher Education Compact (MHEC) in assisting community colleges through cost savings programs, collaborative programmatic initiatives, and research to inform policy and improve practice--including recent efforts to develop valid and reliable methods of measuring the effectiveness and efficiency of…

  10. Expenditures, Efficiency, and Effectiveness in U.S. Undergraduate Higher Education: A National Benchmark Model

    ERIC Educational Resources Information Center

    Powell, Brett A.; Gilleland, Diane Suitt; Pearson, L. Carolyn

    2012-01-01

    Institutions of higher education are under pressure to be accountable for their expenditures while demonstrating their effectiveness. Through structural equation modeling, a relationship was found between expenditures and the efficiency and effectiveness of an institution, and an optimal expenditure level was found that maximized an institution's…

  11. Efficiency, Costs, Rankings and Heterogeneity: The Case of US Higher Education

    ERIC Educational Resources Information Center

    Agasisti, Tommaso; Johnes, Geraint

    2015-01-01

    Among the major trends in the higher education (HE) sector, the development of rankings as a policy and managerial tool is of particular relevance. However, despite the diffusion of these instruments, it is still not clear how they relate with traditional performance measures, like unit costs and efficiency scores. In this paper, we estimate a…

  12. Credit: A New Perspective for Solving the Contradiction between Equity and Efficiency in Higher Education

    ERIC Educational Resources Information Center

    Qiuheng, Shi; Delin, Wang

    2004-01-01

    The contradiction between equity and efficiency is an important issue common to the development of higher education worldwide as well as a problem that many thinkers, politicians, pedagogues, sociologists, and economists, both past and present and in China and abroad attempted to solve. There is an abundance of expositions on equity and efficiency…

  13. Advanced Nano-Composites for Increased Energy Efficiency

    SciTech Connect

    2009-05-01

    This factsheet describes a research project whose goal is to increase energy efficiency and operating lifetime of wear-intensive industrial components and systems by developing and commercializing a family of ceramic-based monolithic composites that have shown remarkable resistance to wear in laboratory tests.

  14. More Efficient Power Conversion for EVs: Gallium-Nitride Advanced Power Semiconductor and Packaging

    SciTech Connect

    2010-02-01

    Broad Funding Opportunity Announcement Project: Delphi is developing power converters that are smaller and more energy efficient, reliable, and cost-effective than current power converters. Power converters rely on power transistors which act like a very precisely controlled on-off switch, controlling the electrical energy flowing through an electrical circuit. Most power transistors today use silicon (Si) semiconductors. However, Delphi is using semiconductors made with a thin layer of gallium-nitride (GaN) applied on top of the more conventional Si material. The GaN layer increases the energy efficiency of the power transistor and also enables the transistor to operate at much higher temperatures, voltages, and power-density levels compared to its Si counterpart. Delphi is packaging these high-performance GaN semiconductors with advanced electrical connections and a cooling system that extracts waste heat from both sides of the device to further increase the device’s efficiency and allow more electrical current to flow through it. When combined with other electronic components on a circuit board, Delphi’s GaN power transistor package will help improve the overall performance and cost-effectiveness of HEVs and EVs.

  15. Low efficiency IDO2 enzymes are conserved in lower vertebrates, whereas higher efficiency IDO1 enzymes are dispensable.

    PubMed

    Yuasa, Hajime J; Mizuno, Keiko; Ball, Helen J

    2015-07-01

    Indoleamine 2,3-dioxygenase (IDO) is a Trp-degrading enzyme that catalyzes the first step in the kynurenine pathway. Two IDO genes, IDO1 and IDO2, are found in vertebrates and the timing of the gene duplication giving rise to the genes has been controversial. In the present study, we report that several fishes and two turtles also have both IDO1 and IDO2. This represents definitive evidence for the gene duplication occurring before the divergence of vertebrates, with IDO1 having been lost in a number of lower vertebrate lineages. IDO2 enzymes have a relatively low affinity for l-Trp; however, Anolis carolinensis (lizard) IDO2 has an affinity for l-Trp comparable to mammalian IDO1 enzymes. We identified a Ser residue located in the distal heme pocket of IDO1 (distal-Ser) (corresponding to Ser167 of human IDO1) that is conserved in all IDO1 enzymes and the lizard IDO2. This residue is conserved as Thr (distal-Thr) in other IDO2 enzymes. Biochemical analyses, using IDO variants with either Ser or Thr substitutions, suggest that the distal-Ser change was crucial for the improvement in affinity for l-Trp in ancient IDO1. The ancestral IDO1 likely had a 'moderate' enzymatic efficiency for l-Trp, clearly higher than IDO2 but lower than mammalian IDO1. The distal-Ser of lizard IDO2 bestows a high affinity for l-Trp, however, this unique IDO2 has a low enzymatic efficiency because of its very low catalytic velocity. Thus, low efficiency IDO2 enzymes have been conserved throughout vertebrate evolution, whereas higher efficiency IDO1 enzymes are dispensable in many lower vertebrate lineages.

  16. Advanced Klystrons for High Efficiency Accelerator Systems - Final Report

    SciTech Connect

    Read, Michael; Ives, Robert Lawrence

    2014-03-26

    This program explored tailoring of RF pulses used to drive accelerator cavities. Simulations indicated that properly shaping the pulse risetime to match accelerator cavity characteristics reduced reflected power and increased total efficiency. Tailoring the pulse requires a high power, gridded, klystron to shape the risetime while also controlling the beam current. The Phase I program generated a preliminary design of a gridded electron gun for a klystron producing 5-10 MW of RF power. This required design of a segmented cathode using Controlled Porosity Reservoir cathodes to limit power deposition on the grid. The program was successful in computationally designing a gun producing a high quality electron beam with grid control. Additional analysis of pulse tailoring indicated that technique would only be useful for cavity drive pulses that were less than approximately 2-3 times the risetime. Otherwise, the efficiency gained during the risetime of the pulse became insignificant when considering the efficiency over the entire pulse. Consequently, it was determined that a Phase II program would not provide sufficient return to justify the cost. Never the less, other applications for a high power gridded gun are currently being pursued. This klystron, for example, would facilitate development inverse Comptom x-ray sources by providing a high repetition rate (10 -100 kHz) RF source.

  17. Second Generation Advanced Reburning for High Efficiency NOx Control

    SciTech Connect

    Vladimir M. Zamansky; Vitali V. Lissianski

    1999-12-31

    This project is designed to develop a family of novel NO{sub x} control technologies, called Second Generation Advanced Reburning (SGAR) which has the potential to achieve 90+ NO{sub x} control in coal fired boilers at a significantly lower cost than Selective Catalytic Reduction. The ninth reporting period in Phase II (October 1-December 31, 1999) included preparation of the 10 x 10{sup 6} Btu/hr Tower Furnace for tests and setting the SGAR model to predict process performance under Tower Furnace conditions. Based on results of previous work, a paper has been prepared and submitted for the presentation at the 28 Symposium (International) on Combustion to be held at the University of Edinburgh, Scotland.

  18. Second Generation Advanced Reburning for High Efficiency NOx Control

    SciTech Connect

    Vladimir M. Zamansky; Pete M. Maly; Vitali V. Lissianski

    2000-12-31

    This project is designed to develop a family of novel NO{sub x} control technologies, called Second Generation Advanced Reburning (SGAR) which has the potential to achieve 90+% NO{sub x} control in coal-fired boilers at a significantly lower cost than SCR. The thirteenth reporting period in Phase II (October 1-December 31, 2000) included SGAR tests in which coal was used as the reburning fuel. All test work was conducted at GE-EER's 1.0 MMBtu/hr Boiler Simulator Facility. Three test series were performed including AR-Lean, AR-Rich, and reburning + SNCR. Tests demonstrated that over 90% NO{sub x} reduction could be achieved with utilization of coal as a reburning fuel in SGAR. The most effective SGAR variant is reburning + SNCR followed by AR-Lean and AR-Rich.

  19. High efficiency fuel cell/advanced turbine power cycles

    SciTech Connect

    Morehead, H.

    1996-12-31

    The following figures are included: Westinghouse (W.) SOFC pilot manufacturing facility; cell scale-up plan; W. 25 kW SOFC unit at the utility`s facility on Rokko Island; pressure effect on SOFC power and efficiency; SureCELL{trademark} vs conventional gas turbine plants; SureCELL{trademark} product line for distributed power applications; 20 MW pressurized SOFC/gas turbine power plant; 10 MW SOFT/CT power plant; SureCELL{trademark} plant concept design requirements; and W. SOFC market entry.

  20. SECOND GENERATION ADVANCED REBURNING FOR HIGH EFFICIENCY NOx CONTROL

    SciTech Connect

    1998-07-30

    This project is designed to develop a family of novel NO{sub x} control technologies, called Second Generation Advanced Reburning which has the potential to achieve 90+% NO{sub x} control in coal fired boilers at a significantly lower cost than SCR. The third reporting period in Phase II (April 1--June 30, 1998) included experimental activities at pilot scale and comparison of the results with full-scale data. The pilot scale tests were performed with the objective of simulating furnace conditions of ongoing full-scale tests at the Greenidge boiler No. 6 owned and operated by NYSEG and defining the processes controlling AR performance to subsequently improve the performance. The tests were conducted in EER' s Boiler Simulator Facility. The main fuel pulsing system was used at the BSF to control the degree of unmixedness, thus providing control over furnace gas O{sub 2} and CO concentrations. Results on AR-Lean, presented in the previous quarterly report, were compared with full-scale data. Performance of reburn+SNCR was tested to predict NO{sub x} control at Greenidge. The results of the BSF reburn+SNCR simulation tests demonstrated that there are synergistic advantages of using these two technologies in series. In particular, injection of overfire air provides additional mixing that reduces negative effects on AR performance at the temperature regime of the Greenidge boiler.

  1. Gasoline Ultra Efficient Fuel Vehicle with Advanced Low Temperature Combustion

    SciTech Connect

    Confer, Keith

    2014-12-18

    The objective of this program was to develop, implement and demonstrate fuel consumption reduction technologies which are focused on reduction of friction and parasitic losses and on the improvement of thermal efficiency from in-cylinder combustion. The program was executed in two phases. The conclusion of each phase was marked by an on-vehicle technology demonstration. Phase I concentrated on short term goals to achieve technologies to reduce friction and parasitic losses. The duration of Phase I was approximately two years and the target fuel economy improvement over the baseline was 20% for the Phase I demonstration. Phase II was focused on the development and demonstration of a breakthrough low temperature combustion process called Gasoline Direct- Injection Compression Ignition (GDCI). The duration of Phase II was approximately four years and the targeted fuel economy improvement was 35% over the baseline for the Phase II demonstration vehicle. The targeted tailpipe emissions for this demonstration were Tier 2 Bin 2 emissions standards.

  2. Efficient nanorod-based amorphous silicon solar cells with advanced light trapping

    SciTech Connect

    Kuang, Y.; Lare, M. C. van; Polman, A.; Veldhuizen, L. W.; Schropp, R. E. I.; Rath, J. K.

    2015-11-14

    We present a simple, low-cost, and scalable approach for the fabrication of efficient nanorod-based solar cells. Templates with arrays of self-assembled ZnO nanorods with tunable morphology are synthesized by chemical bath deposition using a low process temperature at 80 °C. The nanorod templates are conformally coated with hydrogenated amorphous silicon light absorber layers of 100 nm and 200 nm thickness. An initial efficiency of up to 9.0% is achieved for the optimized design. External quantum efficiency measurements on the nanorod cells show a substantial photocurrent enhancement both in the red and the blue parts of the solar spectrum. Key insights in the light trapping mechanisms in these arrays are obtained via a combination of three-dimensional finite-difference time-domain simulations, optical absorption, and external quantum efficiency measurements. Front surface patterns enhance the light incoupling in the blue, while rear side patterns lead to enhanced light trapping in the red. The red response in the nanorod cells is limited by absorption in the patterned Ag back contact. With these findings, we develop and experimentally realize a further advanced design with patterned front and back sides while keeping the Ag reflector flat, showing significantly enhanced scattering from the back reflector with reduced parasitic absorption in the Ag and thus higher photocurrent generation. Many of the findings in this work can serve to provide insights for further optimization of nanostructures for thin-film solar cells in a broad range of materials.

  3. Higher-order modulation formats for spectral-efficient high-speed metro systems

    NASA Astrophysics Data System (ADS)

    Freund, R.; Nölle, M.; Seimetz, M.; Hilt, J.; Fischer, J.; Ludwig, R.; Schubert, C.; Bach, H.-G.; Velthaus, K.-O.; Schell, M.

    2011-01-01

    Worldwide, higher-order modulation formats are intensively investigated to further increase the spectral efficiency for building the next generation of high-speed metro systems. IQ-modulators, coherent receivers and electronic equalizers are hereby discussed as key devices. We report on system design issues as well as on HHI's latest achievements in developing InP based high-speed modulators and coherent receiver frontends.

  4. Gas-phase advanced oxidation for effective, efficient in situ control of pollution.

    PubMed

    Johnson, Matthew S; Nilsson, Elna J K; Svensson, Erik A; Langer, Sarka

    2014-01-01

    In this article, gas-phase advanced oxidation, a new method for pollution control building on the photo-oxidation and particle formation chemistry occurring in the atmosphere, is introduced and characterized. The process uses ozone and UV-C light to produce in situ radicals to oxidize pollution, generating particles that are removed by a filter; ozone is removed using a MnO2 honeycomb catalyst. This combination of in situ processes removes a wide range of pollutants with a comparatively low specific energy input. Two proof-of-concept devices were built to test and optimize the process. The laboratory prototype was built of standard ventilation duct and could treat up to 850 m(3)/h. A portable continuous-flow prototype built in an aluminum flight case was able to treat 46 m(3)/h. Removal efficiencies of >95% were observed for propane, cyclohexane, benzene, isoprene, aerosol particle mass, and ozone for concentrations in the range of 0.4-6 ppm and exposure times up to 0.5 min. The laboratory prototype generated a OH(•) concentration derived from propane reaction of (2.5 ± 0.3) × 10(10) cm(-3) at a specific energy input of 3 kJ/m(3), and the portable device generated (4.6 ± 0.4) × 10(9) cm(-3) at 10 kJ/m(3). Based on these results, in situ gas-phase advanced oxidation is a viable control strategy for most volatile organic compounds, specifically those with a OH(•) reaction rate higher than ca. 5 × 10(-13) cm(3)/s. Gas-phase advanced oxidation is able to remove compounds that react with OH and to control ozone and total particulate mass. Secondary pollution including formaldehyde and ultrafine particles might be generated, depending on the composition of the primary pollution.

  5. Advanced Nanostructured Molecular Sieves for Energy Efficient Industrial Separations

    SciTech Connect

    Kunhao Li, Michael Beaver

    2012-01-18

    Due to the very small relative volatility difference between propane and propylene, current propane/propylene separation by distillation requires very tall distillation towers (150-250 theoretical plates) and large reflux ratios (up to 15), which is considered to be the most energy consuming large-scale separation process. Adsorptive separation processes are widely considered to be more energy-efficient alternatives to distillation. However, slow diffusion kinetics/mass transport rate through the adsorbent bed often limits the performance of such processes, so further improvements are possible if intra-particle mass transfer rates can be improved. Rive Technology, Inc. is developing and commercializing its proprietary mesoporous zeolite technology for catalysis and separation. With well-controlled intracrystalline mesoporosity, diffusion kinetics through such mesoporous zeolite based catalysts is much improved relative to conventional zeolites, leading to significantly better product selectivity. This 'proof-of-principle' project (DE-EE0003470) is intended to demonstrate that Rive mesoporous zeolite technology can be extended and applied in adsorptive propane/propylene separation and lead to significant energy saving compared to the current distillation process. In this project, the mesoporous zeolite Y synthesis technology was successfully extended to X and A zeolites that are more relevant to adsorbent applications. Mesoporosity was introduced to zeolite X and A for the first time while maintaining adequate adsorption capacity. Zeolite adsorbents were tested for liquid phase separation performance using a pulse flow test unit and the test results show that the separation selectivity of the mesoporous zeolite adsorbent is much closer to optimal for a Simulated Moving Bed (SMB) separation process and the enhanced mesoporosity lead to >100% increase of overall mass transport rate for propane and propylene. These improvements will significantly improve the

  6. Lessons in Leadership: Executive Leadership Programs for Advancing Diversity in Higher Education. Diversity in Higher Education. Volume 5

    ERIC Educational Resources Information Center

    Leon, David, Ed.

    2005-01-01

    A largely unseen phenomenon is shaping the direction of higher education today: the growth of leadership programs. These programs are hidden ladders that help the talented move up toward university presidencies. Their number and importance are rapidly increasing, and they will more and more determine who makes decisions in higher education. More…

  7. An efficient higher-order PML in WLP-FDTD method for time reversed wave simulation

    NASA Astrophysics Data System (ADS)

    Wei, Xiao-Kun; Shao, Wei; Ou, Haiyan; Wang, Bing-Zhong

    2016-09-01

    Derived from a stretched coordinate formulation, a higher-order complex frequency shifted (CFS) perfectly matched layer (PML) is proposed for the unconditionally stable finite-difference time-domain (FDTD) method based on weighted Laguerre polynomials (WLPs). The higher-order PML is implemented with an auxiliary differential equation (ADE) approach. In order to further improve absorbing performance, the parameter values of stretching functions in the higher-order PML are optimized by the multi-objective genetic algorithm (MOGA). The optimal solutions can be chosen from the Pareto front for trading-off between two independent objectives. It is shown in a numerical test that the higher-order PML is efficient in terms of attenuating propagating waves and reducing late time reflections. Moreover, the higher-order PML can be placed very close to the wall when analyzing the channel characteristics of time reversal (TR) waves in a multipath indoor environment. Numerical examples of TR wave propagation demonstrate the availability of the proposed method.

  8. The impact of attaining the Welsh Baccalaureate Advanced Diploma on academic performance in bioscience higher education

    NASA Astrophysics Data System (ADS)

    Yhnell, Emma; Wood, Heather; Baker, Mathew; Amici-Dargan, Sheila; Taylor, Chris; Randerson, Peter; Shore, Andrew

    2016-01-01

    Since the introduction of the Welsh Baccalaureate Advanced Diploma Qualification (WBQ) in 2003, an increasing number of students are applying to higher education institutions (HEIs) with this qualification. The advanced-level WBQ is regarded as equivalent to one General Certificate of Education A-Level (GCE A-Level). This study assesses the impact of attaining the WBQ in addition to three GCE A-Levels on overall university degree performance in comparison to attaining four GCE A-Levels, in three cohorts of undergraduate students (Year 1 = 318, Year 2 = 280, Year 3 = 236) studying Biosciences from 2005 to 2011 at a UK HEI. Binary logistic regression was used to compare the academic attainment of students who had achieved four GCE A-Levels to those who had achieved three GCE A-Levels in addition to the WBQ. Comparisons were also made between students who had achieved three GCE A-Levels and those who had achieved three GCE A-Levels in addition to the WBQ. The results suggest that students who achieved the WBQ qualification in its current form, in addition to three GCE A-Levels, performed less well academically in undergraduate studies than those who achieved four GCE A-Levels. Furthermore, this effect was still present when the balance between coursework and examination was considered, and when students who had achieved the WBQ in addition to three GCE A-Levels were compared to students who had achieved three GCE A-Levels.

  9. Light collection optimization for composite photoanode in dye-sensitized solar cells: Towards higher efficiency

    SciTech Connect

    Guo, X. Z.; Shen, W. Z.

    2015-06-14

    Composite photoanode comprising nanoparticles and one-dimensional (1D) nanostructure is a promising alternative to conventional photoanode for dye-sensitized solar cells (DSCs). Besides fast electron transport channels, the 1D nanostructure also plays as light scattering centers. Here, we theoretically investigate the light scattering properties of capsule-shaped 1D nanostructure and their influence on the light collection of DSCs. It is found that the far-field light scattering of a single capsule depends on its volume, shape, and orientation: capsules with bigger equivalent spherical diameter, smaller aspect ratio, and horizontal orientation demonstrate stronger light scattering especially at large scattering angle. Using Monte Carlo approach, we simulated and optimized the light harvesting efficiency of the cell. Two multilayer composite photoanodes containing orderly or randomly oriented capsules are proposed. DSCs composed of these two photoanodes are promising for higher efficiencies because of their efficient light collection and superior electron collection. These results will provide practical guidance to the design and optimization of the photoanodes for DSCs.

  10. Efficient Reformulation of the Thermoelastic Higher-order Theory for Fgms

    NASA Technical Reports Server (NTRS)

    Bansal, Yogesh; Pindera, Marek-Jerzy; Arnold, Steven M. (Technical Monitor)

    2002-01-01

    Functionally graded materials (FGMs) are characterized by spatially variable microstructures which are introduced to satisfy given performance requirements. The microstructural gradation gives rise to continuously or discretely changing material properties which complicate FGM analysis. Various techniques have been developed during the past several decades for analyzing traditional composites and many of these have been adapted for the analysis of FGMs. Most of the available techniques use the so-called uncoupled approach in order to analyze graded structures. These techniques ignore the effect of microstructural gradation by employing specific spatial material property variations that are either assumed or obtained by local homogenization. The higher-order theory for functionally graded materials (HOTFGM) is a coupled approach developed by Aboudi et al. (1999) which takes the effect of microstructural gradation into consideration and does not ignore the local-global interaction of the spatially variable inclusion phase(s). Despite its demonstrated utility, however, the original formulation of the higher-order theory is computationally intensive. Herein, an efficient reformulation of the original higher-order theory for two-dimensional elastic problems is developed and validated. The use of the local-global conductivity and local-global stiffness matrix approach is made in order to reduce the number of equations involved. In this approach, surface-averaged quantities are the primary variables which replace volume-averaged quantities employed in the original formulation. The reformulation decreases the size of the global conductivity and stiffness matrices by approximately sixty percent. Various thermal, mechanical, and combined thermomechanical problems are analyzed in order to validate the accuracy of the reformulated theory through comparison with analytical and finite-element solutions. The presented results illustrate the efficiency of the reformulation and its

  11. Surface Catalytic Efficiency of Advanced Carbon Carbon Candidate Thermal Protection Materials for SSTO Vehicles

    NASA Technical Reports Server (NTRS)

    Stewart, David A.

    1996-01-01

    The catalytic efficiency (atom recombination coefficients) for advanced ceramic thermal protection systems was calculated using arc-jet data. Coefficients for both oxygen and nitrogen atom recombination on the surfaces of these systems were obtained to temperatures of 1650 K. Optical and chemical stability of the candidate systems to the high energy hypersonic flow was also demonstrated during these tests.

  12. Institutional Advancement Strategies in Hard Times. AAHE-ERIC/Higher Education Research Report No. 2.

    ERIC Educational Resources Information Center

    Richards, Michael D.; Sherratt, Gerald R.

    The historical role of institutional advancement and the specific activities and trends currently affecting it are reviewed, and four strategies for advancement programs are suggested. Institutional advancement includes alumni relations, fund-raising, public relations, internal and external communications, and government relations, and its…

  13. Application of an efficient hybrid scheme for aeroelastic analysis of advanced propellers

    NASA Technical Reports Server (NTRS)

    Srivastava, R.; Sankar, N. L.; Reddy, T. S. R.; Huff, D. L.

    1989-01-01

    An efficient 3-D hybrid scheme is applied for solving Euler equations to analyze advanced propellers. The scheme treats the spanwise direction semi-explicitly and the other two directions implicitly, without affecting the accuracy, as compared to a fully implicit scheme. This leads to a reduction in computer time and memory requirement. The calculated power coefficients for two advanced propellers, SR3 and SR7L, and various advanced ratios showed good correlation with experiment. Spanwise distribution of elemental power coefficient and steady pressure coefficient differences also showed good agreement with experiment. A study of the effect of structural flexibility on the performance of the advanced propellers showed that structural deformation due to centrifugal and aero loading should be included for better correlation.

  14. Advancing Campus Efficiencies: A Companion for Campus Leaders in the Digital Era

    ERIC Educational Resources Information Center

    Johnstone, Sally M.

    2007-01-01

    Technology is continually changing the world. In higher education in particular, new technologies can be applied to great advantage by campus communities seeking to offer better services for students in more efficient ways. Written for deans, vice presidents, and presidents of higher education institutions, this book provides advice that is…

  15. Advances toward More Efficient Targeted Delivery of Nanoparticles in Vivo: Understanding Interactions between Nanoparticles and Cells.

    PubMed

    Polo, Ester; Collado, Manuel; Pelaz, Beatriz; Del Pino, Pablo

    2017-03-07

    In this Perspective, we describe current challenges and recent advances in efficient delivery and targeting of nanoparticles in vivo. We discuss cancer therapy, nanoparticle-biomolecule interactions, nanoparticle trafficking in cells, and triggers and responses to nanoparticle-cell interactions. No matter which functionalization strategy to target cancer is chosen, passive or active targeting, more than 99% of the nanoparticles administered in vivo end up in the mononuclear phagocytic system, mainly sequestered by macrophages. Comprehensive studies, such as the one reported by MacParland et al. in this issue of ACS Nano, will help to close the gap between nanotechnology-based drug-delivery solutions and advanced medicinal products.

  16. Development of an advanced high efficiency coal combustor for boiler retrofit

    SciTech Connect

    LaFlesh, R.C.; Rini, M.J.; McGowan, J.G.; Beer, J.M.; Toqan, M.A.

    1990-04-01

    The objective of the program was to develop an advanced coal combustion system for firing beneficiated coal fuels (BCFs) capable of being retrofitted to industrial boilers originally designed for firing natural gas. The High Efficiency Advanced Coal Combustor system is capable of firing microfine coal-water fuel (MCWF), MCWF with alkali sorbent (for SO{sub 2} reduction), and dry microfine coal. Design priorities for the system were that it be simple to operate and offer significant reductions in NO{sub x}, SO{sub x}, and particulate emissions as compared with current coal-fired combustor technology. (VC)

  17. Development of an advanced high efficiency coal combustor for boiler retrofit. Summary report

    SciTech Connect

    LaFlesh, R.C.; Rini, M.J.; McGowan, J.G.; Beer, J.M.; Toqan, M.A.

    1990-04-01

    The objective of the program was to develop an advanced coal combustion system for firing beneficiated coal fuels (BCFs) capable of being retrofitted to industrial boilers originally designed for firing natural gas. The High Efficiency Advanced Coal Combustor system is capable of firing microfine coal-water fuel (MCWF), MCWF with alkali sorbent (for SO{sub 2} reduction), and dry microfine coal. Design priorities for the system were that it be simple to operate and offer significant reductions in NO{sub x}, SO{sub x}, and particulate emissions as compared with current coal-fired combustor technology. (VC)

  18. Evaluation Procedures Used To Measure the Efficiency of Higher Education Systems and Institutions. New Papers on Higher Education: Studies and Research.

    ERIC Educational Resources Information Center

    Dockrell, W. B.; And Others

    This study of higher education efficiency evaluation consists of five country reports from five different regions of the world: Colombia, Jordan, Malaysia, the Netherlands, and Nigeria. The reports describe the approaches to the evaluation process in each country and in the process highlight common concerns and awareness. The studies were all…

  19. Making the Case for Leadership: Profiles of Chief Advancement Officers in Higher Education

    ERIC Educational Resources Information Center

    Croteau, Jon Derek; Smith, Zachary A.

    2011-01-01

    The advancement industry has experienced tremendous growth in breadth and depth over the last few decades. Driving this growth is the chief advancement officer; however, as a relatively new position on most college and university campuses, little is formally known about the role and the people who fill it. In "Making the Case for Leadership", Jon…

  20. The Advancement President and the Academy: Profiles in Institutional Leadership. Series on Higher Education.

    ERIC Educational Resources Information Center

    Murphy, Mary Kay, Ed.

    This book presents 15 essays concerning the growing importance of institutional advancement experience to winning and successfully conducting a college or university presidency. This is a series of essays by successful university CEOs who achieved their positions from an advancement background and who clearly understand the importance of…

  1. Advanced instrumentation for DNP-enhanced MAS NMR for higher magnetic fields and lower temperatures.

    PubMed

    Matsuki, Yoh; Idehara, Toshitaka; Fukazawa, Jun; Fujiwara, Toshimichi

    2016-03-01

    Sensitivity enhancement of MAS NMR using dynamic nuclear polarization (DNP) is gaining importance at moderate fields (B0<9T) and temperatures (T>90K) with potential applications in chemistry and material sciences. However, considering the ever-increasing size and complexity of the systems to be studied, it is crucial to establish DNP under higher field conditions, where the spectral resolution and the basic NMR sensitivity tend to improve. In this perspective, we overview our recent efforts on hardware developments, specifically targeted on improving DNP MAS NMR at high fields. It includes the development of gyrotrons that enable continuous frequency tuning and rapid frequency modulation for our 395 GHz-600 MHz and 460 GHz-700 MHz DNP NMR spectrometers. The latter 700 MHz system involves two gyrotrons and a quasi-optical transmission system that combines two independent sub-millimeter waves into a single dichromic wave. We also describe two cryogenic MAS NMR probe systems operating, respectively, at T ∼ 100K and ∼ 30K. The latter system utilizes a novel closed-loop helium recirculation mechanism, achieving cryogenic MAS without consuming any cryogen. These instruments altogether should promote high-field DNP toward more efficient, reliable and affordable technology. Some experimental DNP results obtained with these instruments are presented.

  2. Advances in high-throughput and high-efficiency chiral liquid chromatographic separations.

    PubMed

    Patel, Darshan C; Wahab, M Farooq; Armstrong, Daniel W; Breitbach, Zachary S

    2016-10-07

    The need for improved liquid chromatographic chiral separations has led to the advancement of chiral screening techniques as well as the development of new, high efficiency chiral separation methods and stationary phases. This review covers these advancements, which primarily occurred over the last 15 years. High throughput techniques include multi-column screening units, multiple injection sequences, and fast gradient SFC screening. New separation methods and column technologies that aim at high efficiency chiral separations include the use of achiral UHPLC (i.e. sub-2μm) columns for separating derivatized chiral analytes or using chiral additives in the run buffer, UHPLC chiral stationary phases, and superficially porous particle based chiral stationary phases. Finally, the enhancement of chiral separations through these new technologies requires that certain instrumental considerations be made. Future directions in continuing to improve chiral separations are also discussed.

  3. Advanced Thermoelectric Materials for Efficient Waste Heat Recovery in Process Industries

    SciTech Connect

    Adam Polcyn; Moe Khaleel

    2009-01-06

    The overall objective of the project was to integrate advanced thermoelectric materials into a power generation device that could convert waste heat from an industrial process to electricity with an efficiency approaching 20%. Advanced thermoelectric materials were developed with figure-of-merit ZT of 1.5 at 275 degrees C. These materials were not successfully integrated into a power generation device. However, waste heat recovery was demonstrated from an industrial process (the combustion exhaust gas stream of an oxyfuel-fired flat glass melting furnace) using a commercially available (5% efficiency) thermoelectric generator coupled to a heat pipe. It was concluded that significant improvements both in thermoelectric material figure-of-merit and in cost-effective methods for capturing heat would be required to make thermoelectric waste heat recovery viable for widespread industrial application.

  4. Assessing the Comparative Efficiency of Higher Education Institutions in the UK by Means of Data Envelopment Analysis.

    ERIC Educational Resources Information Center

    Athanassopoulos, Antreas D.; Shale, Estelle

    1997-01-01

    Examines the comparative efficiency of higher education institutions in the United Kingdom, responding to governmental concerns for accountability, value for money, and cost control. Tests concepts of cost and outcome efficiency, using data- development analysis, to gain further insights into universities' operations. Applying this methodology to…

  5. The Impact on Growth of Higher Efficiency of Public Spending on Schools. OECD Economics Department Working Papers No. 547

    ERIC Educational Resources Information Center

    Gonand, Frederic

    2007-01-01

    This paper assesses the impact on economic growth of increased efficiency of public spending in primary and lower-secondary education. Higher efficiency in public spending in schools can bolster growth through two main channels. On the one hand, it can allow a transfer of labour from the public sector to the business sector at unchanged…

  6. Selected Private Higher Educational Institutions in Metro Manila: A DEA Efficiency Measurement

    ERIC Educational Resources Information Center

    de Guzman, Maria Corazon Gwendolyn N.; Cabana, Emilyn

    2009-01-01

    This paper measures the technical efficiency of 16 selected colleges and universities in Metro Manila, Philippines, using academic data for the SY 2001-2005. Using the data envelopment analysis (DEA), on average, schools posted 0.807 index score and need additional 19.3% efficiency growth to be efficient. Overall, there are top four efficient…

  7. Ducted whistlers propagating in higher-order guided mode and recorded on board of Compass-2 satellite by the advanced Signal Analyzer and Sampler 2

    NASA Astrophysics Data System (ADS)

    Ferencz, Orsolya E.; Bodnár, László; Ferencz, Csaba; Hamar, Dániel; Lichtenberger, János; Steinbach, Péter; Korepanov, Valery; Mikhaylova, Galina; Mikhaylov, Yuri; Kuznetsov, Vladimir

    2009-03-01

    The advanced electromagnetic wave detector and analyzer, Signal Analyzer and Sampler 2, successfully operated on board of Compass-2 satellite (launched May 2006). One of the peculiarities of this experiment was that the efficient sensitivities of both electric and magnetic channels were very close to being identical. Between the interesting events detected we found the evidence of whistler mode signals propagating in higher- (third-) order guided mode, most probable between two layers (i.e., ``onionskin'' structure was in the plasmasphere at this time). We present in the paper the real full wave ultrawideband interpretation of these propagating signals using the exact solution of Maxwell's equations in this boundary problem.

  8. Advanced Electric Systems and Aerodynamics for Efficiency Improvements in Heavy Duty Trucks

    SciTech Connect

    Larry Slone; Jeffrey Birkel

    2007-10-31

    The Advanced Electric Systems and Aerodynamics for Efficiency Improvements in Heavy Duty Trucks program (DE-FC26-04NT42189), commonly referred to as the AES program, focused on areas that will primarily benefit fuel economy and improve heat rejection while driving over the road. The AES program objectives were to: (1) Analyze, design, build, and test a cooling system that provided a minimum of 10 percent greater heat rejection in the same frontal area with no increase in parasitic fan load. (2) Realize fuel savings with advanced power management and acceleration assist by utilizing an integrated starter/generator (ISG) and energy storage devices. (3) Quantify the effect of aerodynamic drag due to the frontal shape mandated by the area required for the cooling system. The program effort consisted of modeling and designing components for optimum fuel efficiency, completing fabrication of necessary components, integrating these components into the chassis test bed, completing controls programming, and performance testing the system both on a chassis dynamometer and on the road. Emission control measures for heavy-duty engines have resulted in increased engine heat loads, thus introducing added parasitic engine cooling loads. Truck electrification, in the form of thermal management, offers technological solutions to mitigate or even neutralize the effects of this trend. Thermal control offers opportunities to avoid increases in cooling system frontal area and forestall reduced fuel economy brought about by additional aerodynamic vehicle drag. This project explored such thermal concepts by installing a 2007 engine that is compliant with current regulations and bears additional heat rejection associated with meeting these regulations. This newer engine replaced the 2002 engine from a previous project that generated less heat rejection. Advanced power management, utilizing a continuously optimized and controlled power flow between electric components, can offer additional

  9. Improvement of in vitro-transcribed amber suppressor tRNAs toward higher suppression efficiency in wheat germ extract.

    PubMed

    Ogawa, Atsushi; Doi, Yasunori; Matsushita, Nobuto

    2011-12-21

    In vitro-transcribed, unmodified, and non-aminoacylated amber suppressor tRNAs that are recognized by natural aminoacyl-tRNA synthetase were improved toward higher suppression efficiency in batch-mode cell-free translation in wheat germ extract. The suppression efficiency of the suppressor obtained through four sequence optimization steps (anticodon alteration of natural tRNAs (the first generation); chimerization of the efficient suppressors in the first generation; investigation and optimization of the effective parts in the second generation; combination of the optimized parts in the third generation) and by the terminal tuning was approximately 60%, which was 2.4-fold higher than that of the best suppressor in the first generation. In addition, an eRF1 aptamer further increased the efficiency up to 85%. This highly efficient suppression system also functioned well in a dialysis-based large-scale protein synthesis.

  10. Efficiency and cost advantages of an advanced-technology nuclear electrolytic hydrogen-energy production facility

    NASA Technical Reports Server (NTRS)

    Donakowski, T. D.; Escher, W. J. D.; Gregory, D. P.

    1977-01-01

    The concept of an advanced-technology (viz., 1985 technology) nuclear-electrolytic water electrolysis facility was assessed for hydrogen production cost and efficiency expectations. The facility integrates (1) a high-temperature gas-cooled nuclear reactor (HTGR) operating a binary work cycle, (2) direct-current (d-c) electricity generation via acyclic generators, and (3) high-current-density, high-pressure electrolyzers using a solid polymer electrolyte (SPE). All subsystems are close-coupled and optimally interfaced for hydrogen production alone (i.e., without separate production of electrical power). Pipeline-pressure hydrogen and oxygen are produced at 6900 kPa (1000 psi). We found that this advanced facility would produce hydrogen at costs that were approximately half those associated with contemporary-technology nuclear electrolysis: $5.36 versus $10.86/million Btu, respectively. The nuclear-heat-to-hydrogen-energy conversion efficiency for the advanced system was estimated as 43%, versus 25% for the contemporary system.

  11. Farmers' Knowledge Attributes Contribute to Attaining Higher Farm Technical Efficiency: A Transition Economy Case

    ERIC Educational Resources Information Center

    Manevska-Tasevska, Gordana

    2013-01-01

    Purpose: This study sought to explore how farmers' knowledge attributes influence the technical efficiency of their farms. In addition, farm efficiency was compared to the actual Macedonian Rural Development Programme (RDP) (2007-2013) and instruments considered to improve Macedonian education potential were evaluated. Design/methodology/approach:…

  12. Efficiency and Effectiveness in Higher Education: Who Is Accountable for What?

    ERIC Educational Resources Information Center

    Kenny, John

    2008-01-01

    There is little doubt that the modern university is far different to that of the early 90s and the work of academics has changed considerably over this time driven by the efficiency and accountability agenda. In taking stock of the changes, it needs to be recognised that often the cry for efficiency and accountability has been used as a mechanism…

  13. Building Relationships of Brand Community in Higher Education: A Strategic Framework for University Advancement

    ERIC Educational Resources Information Center

    McAlexander, James H.; Koenig, Harold F.; Schouten, John W.

    2006-01-01

    Loyal alumni are a mainstay of financial support for many universities. This empirical study of university alumni situates the emerging theory of brand community within the world of university development and advancement. The study measures key relationships that one would expect to find in a healthy university brand community. Most importantly,…

  14. The Consortium of Advanced Residential Buildings (CARB) - A Building America Energy Efficient Housing Partnership

    SciTech Connect

    Robb Aldrich; Lois Arena; Dianne Griffiths; Srikanth Puttagunta; David Springer

    2010-12-31

    This final report summarizes the work conducted by the Consortium of Advanced Residential Buildings (CARB) (http://www.carb-swa.com/), one of the 'Building America Energy Efficient Housing Partnership' Industry Teams, for the period January 1, 2008 to December 31, 2010. The Building America Program (BAP) is part of the Department of Energy (DOE), Energy Efficiency and Renewable Energy, Building Technologies Program (BTP). The long term goal of the BAP is to develop cost effective, production ready systems in five major climate zones that will result in zero energy homes (ZEH) that produce as much energy as they use on an annual basis by 2020. CARB is led by Steven Winter Associates, Inc. with Davis Energy Group, Inc. (DEG), MaGrann Associates, and Johnson Research, LLC as team members. In partnership with our numerous builders and industry partners, work was performed in three primary areas - advanced systems research, prototype home development, and technical support for communities of high performance homes. Our advanced systems research work focuses on developing a better understanding of the installed performance of advanced technology systems when integrated in a whole-house scenario. Technology systems researched included: - High-R Wall Assemblies - Non-Ducted Air-Source Heat Pumps - Low-Load HVAC Systems - Solar Thermal Water Heating - Ventilation Systems - Cold-Climate Ground and Air Source Heat Pumps - Hot/Dry Climate Air-to-Water Heat Pump - Condensing Boilers - Evaporative condensers - Water Heating CARB continued to support several prototype home projects in the design and specification phase. These projects are located in all five program climate regions and most are targeting greater than 50% source energy savings over the Building America Benchmark home. CARB provided technical support and developed builder project case studies to be included in near-term Joule Milestone reports for the following community scale projects: - SBER Overlook at Clipper

  15. Inter-professional work based learning within an MSc in Advanced Practice: lessons from one UK higher education programme.

    PubMed

    Gaskell, Lynne; Beaton, Susan

    2010-09-01

    This paper will describe the implementation of inter-professional work based education (IPE) in one postgraduate Advanced Practitioner programme in the UK. The concept of Advanced Practice has developed as a response of a number of drivers including change in junior doctor training; government policy and increasing demands on the central government funded UK health service (the NHS). The programme was commissioned by the then greater Manchester Strategic Health Authority (now NHS North West) to meet service needs. The educational philosophy underpinning the MSc Advanced Practice (health and social care) provided by the University of Salford is IPE linked to work based learning. The process of work based learning (WBL) and inter-professional learning underpinning the programme will be discussed in relation to feedback from university staff, Advanced Practitioner (AP) students and employer feedback taken from programme and module evaluations. We argue that IPE at this level facilitates a greater understanding of the connectivity between professionals working in the health care system in the UK; a better understanding of the skills and knowledge base of colleagues; more inter-professional working and appropriate referrals in the work place. This has raised the profile of Advanced Practice (AP) in the region and ultimately resulted in better patient care with more effective and efficient use of resources (Acton Shapiro, 2006, 2008).

  16. Towards energy efficient operation of Heating, Ventilation and Air Conditioning systems via advanced supervisory control design

    NASA Astrophysics Data System (ADS)

    Oswiecinska, A.; Hibbs, J.; Zajic, I.; Burnham, K. J.

    2015-11-01

    This paper presents conceptual control solution for reliable and energy efficient operation of heating, ventilation and air conditioning (HVAC) systems used in large volume building applications, e.g. warehouse facilities or exhibition centres. Advanced two-level scalable control solution, designed to extend capabilities of the existing low-level control strategies via remote internet connection, is presented. The high-level, supervisory controller is based on Model Predictive Control (MPC) architecture, which is the state-of-the-art for indoor climate control systems. The innovative approach benefits from using passive heating and cooling control strategies for reducing the HVAC system operational costs, while ensuring that required environmental conditions are met.

  17. Optimization and modeling studies for obtaining high injection efficiency at the Advanced Photon Source.

    SciTech Connect

    Emery, L.; APS Operations Division

    2005-01-01

    In recent years, the optics of the Advanced Photon Source storage ring has evolved to a lower equilibrium emittance (2.5 nm-rad) at the cost of stronger sextupoles and stronger nonlinearities, which have reduced the injection efficiency from the virtual 100% of the high emittance mode. Over the years we have developed a series of optimizations, measurements, and modeling studies of the injection process, which allows us to obtain or maintain low injection losses. The above will be described along with the injection configuration.

  18. Innovative and Efficient Manufacturing Technologies for Highly Advanced Composite Pressure Vessels

    NASA Astrophysics Data System (ADS)

    Hock, Birte; Regnet, Martin; Bickelaier, Stefan; Henne, Florian; Sause, Markus G. R.; Schmidt, Thomas; Geiss, Gunter

    2014-06-01

    The currently ongoing development project at MT Aerospace (MTA) deals with a cost efficient manufacturing process for space structures. Thermoplastic fibre placement, which was identified as one of the most forward-looking technologies, promises advantages such as shorter cycle times and a high level of automation. In addition to the manufacturing method, research activities on non-destructive inspection methods and on acoustic emission analysis are performed. The analysis of the components will also be improved using advanced modelling approaches. The capability of the processes and methods will be shown on the basis of a scaled solid rocket motor casing.

  19. Non-State Actors, and the Advance of Frontier Higher Education Markets in the Global South

    ERIC Educational Resources Information Center

    Robertson, Susan L.; Komljenovic, Janja

    2016-01-01

    This paper examines the growth of global non-state and multilateral actors in the "global south" and the creation of frontier markets in the higher education sector. These developments are part of market-making changes in higher education as the sector is opened to new actors, logics, and innovative services, aimed at "the global…

  20. Advanced properties of extended plasmas for efficient high-order harmonic generation

    SciTech Connect

    Ganeev, R. A.; Suzuki, M.; Kuroda, H.

    2014-05-15

    We demonstrate the advanced properties of extended plasma plumes (5 mm) for efficient harmonic generation of laser radiation compared with the short lengths of plasmas (∼0.3–0.5 mm) used in previous studies. The harmonic conversion efficiency quadratically increased with the growth of plasma length. The studies of this process along the whole extreme ultraviolet range using the long plasma jets produced on various metal surfaces, particularly including the resonance-enhanced laser frequency conversion and two-color pump, are presented. Such plasmas could be used for the quasi-phase matching experiments by proper modulation of the spatial characteristics of extended ablating area and formation of separated plasma jets.

  1. Diagnosis of Thermal Efficiency of Advanced Combined Cycle Power Plants Using Optical Torque Sensors

    NASA Astrophysics Data System (ADS)

    Umezawa, Shuichi

    A new optical torque measurement method was applied to diagnosis of thermal efficiency of advanced combined cycle, i.e. ACC, plants. Since the ACC power plant comprises a steam turbine and a gas turbine and both of them are connected to the same generator, it is difficult to identify which turbine in the plant deteriorates the performance when the plant efficiency is reduced. The sensor measures axial distortion caused by power transmission by use of He-Ne laser beams, small stainless steel reflectors having bar-code patterns, and a technique of signal processing featuring high frequency. The sensor was applied to the ACC plants of TOKYO ELECTRIC POWER COMPANY, TEPCO, following the success in the application to the early combined cycle plants of TEPCO. The sensor performance was inspected over a year. After an improvement related to the signal process, it is considered that the sensor performance has reached a practical use level.

  2. ENERGY EFFICIENCY CHALLENGES ADDRESSED THROUGH THE USE OF ADVANCED REFRACTORY CERAMIC MATERIALS

    SciTech Connect

    Hemrick, James Gordon

    2014-01-01

    Refractory ceramics can play a critical role in improving the energy efficiency of traditional industrial processes through increased furnace efficiency brought about by the employment of novel refractory systems and techniques. Examples of advances in refractory materials related to aluminum, gasification, glass, and lime are highlighted. Energy savings are realized based on reduction of chemical reactions, elimination of mechanical degradation caused by the service environment, reduction of temperature limitations of materials, and elimination of costly installation and repair needs. Key results of projects resulting from US Department of Energy (DOE) funded research programs are discussed with emphasis on applicability of these results to high temperature furnace applications and needed research directions for the future.

  3. Trophic assimilation efficiency markedly increases at higher trophic levels in four-level host-parasitoid food chain.

    PubMed

    Sanders, Dirk; Moser, Andrea; Newton, Jason; van Veen, F J Frank

    2016-03-16

    Trophic assimilation efficiency (conversion of resource biomass into consumer biomass) is thought to be a limiting factor for food chain length in natural communities. In host-parasitoid systems, which account for the majority of terrestrial consumer interactions, a high trophic assimilation efficiency may be expected at higher trophic levels because of the close match of resource composition of host tissue and the consumer's resource requirements, which would allow for longer food chains. We measured efficiency of biomass transfer along an aphid-primary-secondary-tertiary parasitoid food chain and used stable isotope analysis to confirm trophic levels. We show high efficiency in biomass transfer along the food chain. From the third to the fourth trophic level, the proportion of host biomass transferred was 45%, 65% and 73%, respectively, for three secondary parasitoid species. For two parasitoid species that can act at the fourth and fifth trophic levels, we show markedly increased trophic assimilation efficiencies at the higher trophic level, which increased from 45 to 63% and 73 to 93%, respectively. In common with other food chains, δ(15)N increased with trophic level, with trophic discrimination factors (Δ(15)N) 1.34 and 1.49‰ from primary parasitoids to endoparasitic and ectoparasitic secondary parasitoids, respectively, and 0.78‰ from secondary to tertiary parasitoids. Owing to the extraordinarily high efficiency of hyperparasitoids, cryptic higher trophic levels may exist in host-parasitoid communities, which could alter our understanding of the dynamics and drivers of community structure of these important systems.

  4. The Uneasy Public Policy Triangle in Higher Education: Quality, Diversity, and Budgetary Efficiency.

    ERIC Educational Resources Information Center

    Finifter, David H., Ed.; And Others

    This book presents essays inspired by an October, 1988, conference on recent changes in the relationship between public policy and higher education. The essays appear in five sections, the first of which, titled "Looking Backward: The Historical Context of Public Policy and Higher Education," serves as a retrospective and prospective examination…

  5. Financial Sustainability and Efficiency in Full Economic Costing of Research in UK Higher Education Institutions

    ERIC Educational Resources Information Center

    Universities UK, 2010

    2010-01-01

    A Task Group was created to consider the financial sustainability of research undertaken in universities and other institutions of higher education in the United Kingdom. The UK has a very successful Higher Education sector across all key areas of activity, but it is vital that the sector reinvests for the future and is transparent in the use of…

  6. Advanced Techniques for Deploying Reliable and Efficient Access Control: Application to E-healthcare.

    PubMed

    Jaïdi, Faouzi; Labbene-Ayachi, Faten; Bouhoula, Adel

    2016-12-01

    Nowadays, e-healthcare is a main advancement and upcoming technology in healthcare industry that contributes to setting up automated and efficient healthcare infrastructures. Unfortunately, several security aspects remain as main challenges towards secure and privacy-preserving e-healthcare systems. From the access control perspective, e-healthcare systems face several issues due to the necessity of defining (at the same time) rigorous and flexible access control solutions. This delicate and irregular balance between flexibility and robustness has an immediate impact on the compliance of the deployed access control policy. To address this issue, the paper defines a general framework to organize thinking about verifying, validating and monitoring the compliance of access control policies in the context of e-healthcare databases. We study the problem of the conformity of low level policies within relational databases and we particularly focus on the case of a medical-records management database defined in the context of a Medical Information System. We propose an advanced solution for deploying reliable and efficient access control policies. Our solution extends the traditional lifecycle of an access control policy and allows mainly managing the compliance of the policy. We refer to an example to illustrate the relevance of our proposal.

  7. Advanced Controls and Communications for Demand Response andEnergy Efficiency in Commercial Buildings

    SciTech Connect

    Kiliccote, Sila; Piette, Mary Ann; Hansen, David

    2006-01-17

    Commercial buildings account for a large portion of summer peak demand. Research results show that there is significant potential to reduce peak demand in commercial buildings through advanced control technologies and strategies. However, a better understanding of commercial building's contribution to peak demand and the use of energy management and control systems is required to develop this demand response resource to its full potential. This paper discusses recent research results and new opportunities for advanced building control systems to provide demand response (DR) to improve electricity markets and reduce electric grid problems. The main focus of this paper is the role of new and existing control systems for HVAC and lighting in commercial buildings. A demand-side management framework from building operations perspective with three main features: daily energy efficiency, daily peak load management and event driven, dynamic demand response is presented. A general description of DR, its benefits, and nationwide potential in commercial buildings is outlined. Case studies involving energy management and control systems and DR savings opportunities are presented. The paper also describes results from three years of research in California to automate DR in buildings. Case study results and research on advanced buildings systems in New York are also presented.

  8. Efficient Boolean and multi-input flow techniques for advanced mask data processing

    NASA Astrophysics Data System (ADS)

    Salazar, Daniel; Moore, Bill; Valadez, John

    2012-11-01

    Mask data preparation (MDP) typically involves multiple flows, sometimes consisting of many steps to ensure that the data is properly written on the mask. This may include multiple inputs, transformations (scaling, orientation, etc.), and processing (layer extraction, sizing, Boolean operations, data filtering). Many MDP techniques currently in practice require multiple passes through the input data and/or multiple file I/O steps to achieve these goals. This paper details an approach which efficiently process the data, resulting in minimal I/O and greatly improved turnaround times (TAT). This approach takes advanced processing algorithms and adapts them to produce efficient and reliable data flow. In tandem with this processing flow, an internal jobdeck mapping approach, transparent to the user, allows an essentially unlimited number of pattern inputs to be handled in a single pass, resulting in increased flexibility and ease of use. Transformations and processing operations are critical to MDP. Transformations such as scaling, reverse tone and orientation, along with processing including sizing, Boolean operations and data filtering are key parts of this. These techniques are often employed in sequence and/or in parallel in a complex functional chain. While transformations typically are done "up front" when the data is input, processing is less straightforward, involving multiple reads and writes to handle the more intricate functionality and also the collection of input patterns which may be required to produce the data that comprises a single mask. The approach detailed in this paper consists of two complementary techniques: efficient MDP flow and jobdeck mapping. Efficient MDP flow is achieved by pipelining the output of each step to the input of the subsequent step. Rather than writing the output of a particular processing step to file and then reading it in to the following step, the pipelining or chaining of the steps results in an efficient flow with

  9. Climbing Mount Efficiency--small steps, not giant leaps towards higher cloning success in farm animals.

    PubMed

    Oback, Björn

    2008-07-01

    Despite more than a decade of research efforts, farm animal cloning by somatic cell nuclear transfer (SCNT) is still frustratingly inefficient. Inefficiency manifests itself at different levels, which are currently not well integrated. At the molecular level, it leads to widespread genetic, epigenetic and transcriptional aberrations in cloned embryos. At the organismal level, these genome-wide abnormalities compromise development of cloned foetuses and offspring. Specific molecular defects need to be causally linked to specific cloned phenotypes, in order to design specific treatments to correct them. Cloning efficiency depends on the ability of the nuclear donor cell to be fully reprogrammed into an embryonic state and the ability of the enucleated recipient cell to carry out the reprogramming reactions. It has been postulated that reprogrammability of the somatic donor cell epigenome is influenced by its differentiation status. However, direct comparisons between cells of divergent differentiation status within several somatic lineages have found no conclusive evidence for this. Choosing somatic stem cells as donors has not improved cloning efficiency, indicating that donor cell type may be less critical for cloning success. Different recipient cells, on the other hand, vary in their reprogramming ability. In bovine, using zygotes instead of oocytes has increased cloning success. Other improvements in livestock cloning efficiency include better coordinating donor cell type with cell cycle stage and aggregating cloned embryos. In the future, it will be important to demonstrate if these small increases at every step are cumulative, adding up to an integrated cloning protocol with greatly improved efficiency.

  10. Material Science for High-Efficiency Photovoltaics: From Advanced Optical Coatings to Cell Design for High-Temperature Applications

    NASA Astrophysics Data System (ADS)

    Perl, Emmett Edward

    Solar cells based on III-V compound semiconductors are ideally suited to convert solar energy into electricity. The highest efficiency single-junction solar cells are made of gallium arsenide, and have attained an efficiency of 28.8%. Multiple III-V materials can be combined to construct multijunction solar cells, which have reached record efficiencies greater than 45% under concentration. III-V solar cells are also well suited to operate efficiently at elevated temperatures, due in large part to their high material quality. These properties make III-V solar cells an excellent choice for use in concentrator systems. Concentrator photovoltaic systems have attained module efficiencies that exceed 40%, and have the potential to reach the lowest levelized cost of electricity in sunny places like the desert southwest. Hybrid photovoltaic-thermal solar energy systems can utilize high-temperature III-V solar cells to simultaneously achieve dispatchability and a high sunlight-to-electricity efficiency. This dissertation explores material science to advance the state of III-V multijunction solar cells for use in concentrator photovoltaic and hybrid photovoltaic-thermal solar energy systems. The first half of this dissertation describes work on advanced optical designs to improve the efficiency of multijunction solar cells. As multijunction solar cells move to configurations with four or more subcells, they utilize a larger portion of the solar spectrum. Broadband antireflection coatings are essential to realizing efficiency gains for these state-of-the-art cells. A hybrid design consisting of antireflective nanostructures placed on top of multilayer interference-based optical coatings is developed. Antireflection coatings that utilize this hybrid approach yield unparalleled performance, minimizing reflection losses to just 0.2% on sapphire and 0.6% on gallium nitride for 300-1800nm light. Dichroic mirrors are developed for bonded 5-junction solar cells that utilize InGaN as

  11. Appraising the Cost Efficiency of Higher Technological and Vocational Education Institutions in Taiwan Using the Metafrontier Cost-Function Model

    ERIC Educational Resources Information Center

    Lu, Yung-Hsiang; Chen, Ku-Hsieh

    2013-01-01

    This paper aims at appraising the cost efficiency and technology of institutions of higher technological and vocational education. Differing from conventional literature, it considers the potential influence of inherent discrepancies in output quality and characteristics of school systems for institutes of technology (ITs) and universities of…

  12. The Endless Pursuit of Efficiency: The International Movement To Increase Accountability and Performance in Higher Education. ASHE Annual Meeting Paper.

    ERIC Educational Resources Information Center

    Alexander, F. King

    This paper examines the trend toward demanding increased accountability and efficiency by institutions of higher education in the United States and Europe and its implications for the relationship between government and the college or university. It notes that such factors as limited state resources, rising educational costs, and the growing…

  13. Advancing Virginia: Access, Alignment, Investment. The 2007-13 Strategic Plan for Higher Education in Virginia

    ERIC Educational Resources Information Center

    State Council of Higher Education for Virginia, 2007

    2007-01-01

    Despite many accomplishments and a widely-praised system, there remain significant challenges to address in higher education in Virginia: (1) Although the state performs well in six-year graduation rates for bachelor degree programs, graduation rates at specific four-year institutions range from the very high end of the spectrum to the very low;…

  14. Efficiency of advanced oxidation processes in lowering bisphenol A toxicity and oestrogenic activity in aqueous samples.

    PubMed

    Plahuta, Maja; Tišler, Tatjana; Toman, Mihael Jožef; Pintar, Albin

    2014-03-01

    Bisphenol A (BPA) is a well-known endocrine disruptor with adverse oestrogen-like effects eliciting adverse effects in humans and wildlife. For this reason it is necessary to set up an efficient removal of BPA from wastewaters, before they are discharged into surface waters. The aim of this study was to compare the efficiency of BPA removal from aqueous samples with photolytic, photocatalytic, and UV/H₂O₂ oxidation. BPA solutions were illuminated with different bulbs (halogen; 17 W UV, 254 nm; and 150 W UV, 365 nm) with or without the TiO₂ P-25 catalyst or H₂O₂ (to accelerate degradation). Acute toxicity and oestrogenic activity of treated samples were determined using luminescent bacteria (Vibrio fischeri), water fleas (Daphnia magna), zebrafish embryos (Danio rerio), and Yeast Estrogen Screen (YES) assay with genetically modified yeast Saccharomyces cerevisiae. The results confirmed that BPA is toxic and oestrogenically active. Chemical analysis showed a reduction of BPA levels after photolytic treatment and 100 % conversion of BPA by photocatalytic and UV/H₂O₂ oxidation. The toxicity and oestrogenic activity of BPA were largely reduced in photolytically treated samples. Photocatalytic oxidation, however, either did not reduce BPA toxic and oestrogenic effects or even increased them in comparison with the baseline, untreated BPA solution. Our findings suggest that chemical analysis is not sufficient to determine the efficiency of advanced oxidation processes in removing pollutants from water and needs to be complemented with biological tests.

  15. Between Efficiency and Transformation: The Opinion of Deans on the Meaning of Quality in Higher Education

    ERIC Educational Resources Information Center

    Olaskoaga-Larrauri, Jon; Barrenetxea-Ayesta, Miren; Cardona-Rodríguez, Antonio; Mijangos-Del Campo, Juan José; Barandiaran-Galdós, Marta

    2016-01-01

    The literature on quality management at higher education institutions has for some time been working on the basis of two issues: a) the diversity of ideas as to what "quality" means, which makes it harder to apply the principles of quality management in this context; and b) the idea that this diversity is in some way a response to the…

  16. Funding Mechanisms for Higher Education: Financing for Stability, Efficiency, and Responsiveness. World Bank Discussion Papers.

    ERIC Educational Resources Information Center

    Albrecht, Douglas; Ziderman, Adrian

    This discussion paper examines mechanisms through which governments allocate resources to higher education, particularly in developing countries, in order to establish effective means to transfer these subsidies to institutions. The discussion of funding mechanisms develops within the context of three major types of government restrictions which…

  17. Effectiveness and Efficiency in Higher Education for Adults: A Guide for Fostering Learning.

    ERIC Educational Resources Information Center

    Keeton, Morris T.; Sheckley, Barry G.; Griggs, Joan Krejci

    This document uses the findings of educational research and actual case studies to provide guidance on enhancing the learning of adults in higher education while reducing program costs in the context of increasing demands for demonstration of student learning outcomes and decreases in college and university resources. The novelty of the book is…

  18. Adequacy, Efficiency and Equity of Higher Education Financing: The Case of Egypt

    ERIC Educational Resources Information Center

    Fahim, Yasmine; Sami, Noha

    2011-01-01

    To meet its future challenges in financing higher education, Egypt has no option but to search for alternative funding arrangements. This article considers the question of how to do so, keeping in mind the need to ensure equitable access to good quality education for those who cannot afford it. To this end, the article begins by assessing public…

  19. The Efficiency of Higher Education Institutions as a Basis for Forming Competent Personnel for Region Economy

    ERIC Educational Resources Information Center

    Sezonova, Olga N.; Galchenko, Svetlana A.; Khodirevskaya, Valentina N.

    2016-01-01

    The modern market relations open provide new opportunities of development for higher educational institutions, however the majority of universities aren't ready for effective and independent business management yet. At the turn of the 21st century many educational institutions faced such problems as scarcity of federal financing, fundamental…

  20. Higher Education Institutions' Costs and Efficiency: Taking the Decomposition a Further Step

    ERIC Educational Resources Information Center

    Johnes, Geraint; Johnes, Jill

    2009-01-01

    A multiproduct cost function is estimated for English higher education institutions using a panel of data from recent years. The panel approach allows estimation by means of a random parameter stochastic frontier model which provides considerable new insights in that it allows the impact on costs of inter-institutional differences in the cost…

  1. Advanced Passivation Technology and Loss Factor Minimization for High Efficiency Solar Cells.

    PubMed

    Park, Cheolmin; Balaji, Nagarajan; Jung, Sungwook; Choi, Jaewoo; Ju, Minkyu; Lee, Seunghwan; Kim, Jungmo; Bong, Sungjae; Chung, Sungyoun; Lee, Youn-Jung; Yi, Junsin

    2015-10-01

    High-efficiency Si solar cells have attracted great attention from researchers, scientists, photovoltaic (PV) industry engineers for the past few decades. With thin wafers, surface passivation becomes necessary to increase the solar cells efficiency by overcoming several induced effects due to associated crystal defects and impurities of c-Si. This paper discusses suitable passivation schemes and optimization techniques to achieve high efficiency at low cost. SiNx film was optimized with higher transmittance and reduced recombination for using as an effective antireflection and passivation layer to attain higher solar cell efficiencies. The higher band gap increased the transmittance with reduced defect states that persisted at 1.68 and 1.80 eV in SiNx films. The thermal stability of SiN (Si-rich)/SiN (N-rich) stacks was also studied. Si-rich SiN with a refractive index of 2.7 was used as a passivation layer and N-rich SiN with a refractive index of 2.1 was used for thermal stability. An implied Voc of 720 mV with a stable lifetime of 1.5 ms was obtained for the stack layer after firing. Si-N and Si-H bonding concentration was analyzed by FTIR for the correlation of thermally stable passivation mechanism. The passivation property of spin coated Al2O3 films was also investigated. An effective surface recombination velocity of 55 cm/s with a high density of negative fixed charges (Qf) on the order of 9 x 10(11) cm(-2) was detected in Al2O3 films.

  2. Design and efficient production of bovine enterokinase light chain with higher specificity in E. coli.

    PubMed

    Chun, Haarin; Joo, Keehyoung; Lee, Jooyoung; Shin, Hang-Cheol

    2011-06-01

    Enterokinase light chain (EKL) is a serine protease that recognizes Asp-Asp-Asp-Asp-Lys (D(4)K) sequence and cleaves the C-terminal peptide bond of the lysine residue. The utility of EKL as a site-specific cleavage enzyme is hampered by sporadic cleavage at other sites than the canonical D(4)K recognition sequence. In order to produce more site-specific EKL, we have generated several EKL mutants in E. coli with substitutions at Tyr174 and Lys99 using PDI (protein disulfide isomerase) fusion system. Substitution of Tyr174 by basic residues confers higher specificity on EKL. The production of EKL with higher specificity could widen the utility of EKL as a site-specific cleavage enzyme to produce various recombinant proteins with therapeutic or industrial values.

  3. Does centennial morphodynamic evolution lead to higher channel efficiency in San Pablo Bay, California?

    USGS Publications Warehouse

    van der Wegen, M.; Jaffe, B.E.; Barnard, P.L.; Jaffee, B.E.; Schoellhamer, D.H.

    2013-01-01

    Measured bathymetries on 30 year interval over the past 150 years show that San Pablo Bay experienced periods of considerable deposition followed by periods of net erosion. However, the main channel in San Pablo Bay has continuously narrowed. The underlying mechanisms and consequences of this tidal channel evolution are not well understood. The central question of this study is whether tidal channels evolve towards a geometry that leads to more efficient hydraulic conveyance and sediment throughput. We applied a hydrodynamic process-based, numerical model (Delft3D), which was run on 5 San Pablo Bay bathymetries measured between 1856 and 1983. Model results shows increasing energy dissipation levels for lower water flows leading to an approximately 15% lower efficiency in 1983 compared to 1856. During the same period the relative seaward sediment throughput through the San Pablo Bay main channel increased by 10%. A probable explanation is that San Pablo Bay is still affected by the excessive historic sediment supply. Sea level rise and Delta surface water area variations over 150 years have limited effect on the model results. With expected lower sediment concentrations in the watershed and less impact of wind waves due to erosion of the shallow flats, it is possible that energy dissipations levels will decrease again in future decades. Our study suggests that the morphodynamic adaptation time scale to excessive variations in sediment supply to estuaries may be on the order of centuries.

  4. Moving toward a higher efficiency of microcell-mediated chromosome transfer

    PubMed Central

    Liskovykh, Mikhail; Lee, Nicholas CO; Larionov, Vladimir; Kouprina, Natalay

    2016-01-01

    Microcell-mediated chromosome transfer (MMCT) technology enables individual mammalian chromosomes, megabase-sized chromosome fragments, or mammalian artificial chromosomes that include human artificial chromosomes (HACs) and mouse artificial chromosomes (MACs) to be transferred from donor to recipient cells. In the past few decades, MMCT has been applied to various studies, including mapping the genes, analysis of chromosome status such as aneuploidy and epigenetics. Recently, MMCT was applied to transfer MACs/HACs carrying entire chromosomal copies of genes for genes function studies and has potential for regenerative medicine. However, a safe and efficient MMCT technique remains an important challenge. The original MMCT protocol includes treatment of donor cells by Colcemid to induce micronucleation, where each chromosome becomes surrounded with a nuclear membrane, followed by disarrangement of the actin cytoskeleton using Cytochalasin B to help induce microcells formation. In this study, we modified the protocol and demonstrated that replacing Colcemid and Cytochalasin B with TN-16 + Griseofulvin and Latrunculin B in combination with a Collage/Laminin surface coating increases the efficiency of HAC transfer to recipient cells by almost sixfold and is possibly less damaging to HAC than the standard MMCT method. We tested the improved MMCT protocol on four recipient cell lines, including human mesenchymal stem cells and mouse embryonic stem cells that could facilitate the cell engineering by HACs. PMID:27382603

  5. Trophic assimilation efficiency markedly increases at higher trophic levels in four-level host–parasitoid food chain

    PubMed Central

    Moser, Andrea; van Veen, F. J. Frank

    2016-01-01

    Trophic assimilation efficiency (conversion of resource biomass into consumer biomass) is thought to be a limiting factor for food chain length in natural communities. In host–parasitoid systems, which account for the majority of terrestrial consumer interactions, a high trophic assimilation efficiency may be expected at higher trophic levels because of the close match of resource composition of host tissue and the consumer's resource requirements, which would allow for longer food chains. We measured efficiency of biomass transfer along an aphid-primary–secondary–tertiary parasitoid food chain and used stable isotope analysis to confirm trophic levels. We show high efficiency in biomass transfer along the food chain. From the third to the fourth trophic level, the proportion of host biomass transferred was 45%, 65% and 73%, respectively, for three secondary parasitoid species. For two parasitoid species that can act at the fourth and fifth trophic levels, we show markedly increased trophic assimilation efficiencies at the higher trophic level, which increased from 45 to 63% and 73 to 93%, respectively. In common with other food chains, δ15N increased with trophic level, with trophic discrimination factors (Δ15N) 1.34 and 1.49‰ from primary parasitoids to endoparasitic and ectoparasitic secondary parasitoids, respectively, and 0.78‰ from secondary to tertiary parasitoids. Owing to the extraordinarily high efficiency of hyperparasitoids, cryptic higher trophic levels may exist in host–parasitoid communities, which could alter our understanding of the dynamics and drivers of community structure of these important systems. PMID:26962141

  6. Online fault adaptive control for efficient resource management in Advanced Life Support Systems

    NASA Technical Reports Server (NTRS)

    Abdelwahed, Sherif; Wu, Jian; Biswas, Gautam; Ramirez, John; Manders, Eric-J

    2005-01-01

    This article presents the design and implementation of a controller scheme for efficient resource management in Advanced Life Support Systems. In the proposed approach, a switching hybrid system model is used to represent the dynamics of the system components and their interactions. The operational specifications for the controller are represented by utility functions, and the corresponding resource management problem is formulated as a safety control problem. The controller is designed as a limited-horizon online supervisory controller that performs a limited forward search on the state-space of the system at each time step, and uses the utility functions to decide on the best action. The feasibility and accuracy of the online algorithm can be assessed at design time. We demonstrate the effectiveness of the scheme by running a set of experiments on the Reverse Osmosis (RO) subsystem of the Water Recovery System (WRS).

  7. Development of an advanced high efficiency coal combustor for boiler retrofit

    SciTech Connect

    LaFlesh, R.C.; Rini, M.J.; McGowan, J.G.

    1989-10-01

    The overall objective of this program is to develop a high efficiency advanced coal combustor (HEACC) for coal-based fuels capable of being retrofitted to industrial boilers originally designed for firing natural gas, distillate, and/or residual oil. The HEACC system is to be capable of firing microfine coal water fuel (MCWF), MCWF with alkali sorbent (for SO{sub 2} reduction), and dry microfine coal. Design priorities for the system are that it be simple to operate and will offer significant reductions in NO{sub x}, SO{sub x}, and particulate emissions as compared with current coal fired combustor technology. The specific objective of this report is to document the work carried out under Task 1.0 of this contract, Cold Flow Burner Development''. As are detailed in the report, key elements of this work included primary air swirler development, burner register geometry design, cold flow burner model testing, and development of burner scale up criteria.

  8. Advances in the phylogenesis of Agaricales and its higher ranks and strategies for establishing phylogenetic hypotheses.

    PubMed

    Zhao, Rui-Lin; Desjardin, Dennis E; Soytong, Kasem; Hyde, Kevin D

    2008-10-01

    We present an overview of previous research results on the molecular phylogenetic analyses in Agaricales and its higher ranks (Agaricomycetes/Agaricomycotina/Basidiomycota) along with the most recent treatments of taxonomic systems in these taxa. Establishing phylogenetic hypotheses using DNA sequences, from which an understanding of the natural evolutionary relationships amongst clades may be derived, requires a robust dataset. It has been recognized that single-gene phylogenies may not truly represent organismal phylogenies, but the concordant phylogenetic genealogies from multiple-gene datasets can resolve this problem. The genes commonly used in mushroom phylogenetic research are summarized.

  9. Enhanced efficiency in the excitation of higher modes for atomic force microscopy and mechanical sensors operated in liquids

    SciTech Connect

    Penedo, M. Hormeño, S.; Fernández-Martínez, I.; Luna, M.; Briones, F.; Raman, A.

    2014-10-27

    Recent developments in dynamic Atomic Force Microscopy where several eigenmodes are simultaneously excited in liquid media are proving to be an excellent tool in biological studies. Despite its relevance, the search for a reliable, efficient, and strong cantilever excitation method is still in progress. Herein, we present a theoretical modeling and experimental results of different actuation methods compatible with the operation of Atomic Force Microscopy in liquid environments: ideal acoustic, homogeneously distributed force, distributed applied torque (MAC Mode™), photothermal and magnetostrictive excitation. From the analysis of the results, it can be concluded that magnetostriction is the strongest and most efficient technique for higher eigenmode excitation when using soft cantilevers in liquid media.

  10. Which Are the Determinants of Online Students' Efficiency in Higher Education?

    NASA Astrophysics Data System (ADS)

    Castillo-Merino, David; Serradell-Lopez, Enric; González-González, Inés

    International literature shows that the positive effect on students performance from the adoption of innovations in the technology of teaching and learning do not affect all teaching methods and learning styles equally, as it depends on university strategy and policy towards Information and Communication Technologies (ICT) adoption, students abilities, technology uses in the educational process by teachers and students, or the selection of a methodology that matches with digital uses. This paper provides empirical answers to these questions with data from online students at the Open University of Catalonia (UOC). An empirical model based on structural equations has been defined to explain complex relationships between variables. Our results show that motivation is the main variable affecting online students' performance. It appears as a latent variable influenced by students' perception of efficiency, a driver for indirect positive and significant effect on students' performance from students' ability in ICT uses.

  11. Energy-efficiency comparison of advanced ammonia heat-exchanger types

    SciTech Connect

    Panchal, C.; Rabas, T.

    1990-01-01

    Ammonia is the most cost-effective working fluid for many Rankine power cycles and is widely utilized in industrial refrigeration applications. For example, it was selected as the most advantageous working fluid for the comprehensive closed-cycle Ocean Thermal Energy Conversion investigations where the heat source and sink are the warm, surface seawater and the cold, deep seawater, respectively. An essential part of this investigation was to measure the performance of many advanced heat-exchanger types using ammonia as the working fluid and to compare these results with those for conventional shell-and-tube designs. This paper presents an overview of these experiments and their potential significance for improved energy efficiency for industrial refrigeration applications. The heat exchangers used for industrial refrigeration systems account for about 50% of the equipment cost. However, current practice is to use state-of-the-art designs -- the shell-and-tube type without enhanced tubes. Substantial energy savings are possible through the use of advanced ammonia evaporator and condenser heat-exchanger types. 31 refs., 10 figs., 6 tabs.

  12. Interactive Higher Education Instruction to Advance STEM Instruction in the Environmental Sciences - the Brownfield Action Model

    NASA Astrophysics Data System (ADS)

    Liddicoat, J. C.; Bower, P.

    2015-12-01

    The U.S. Environmental Protection Agency estimates that presently there are over half a million brownfields in the United States, but this number only includes sites for which an Environmental Site Assessment has been conducted. The actual number of brownfields is certainly in the millions and constitutes one of the major environmental issues confronting all communities today. Taught in part or entirely online for more than 15 years in environmental science, engineering, and hydrology courses at over a dozen colleges, universities, and high schools in the United States, Brownfield Action (BA) is an interactive, web-based simulation that combines scientific expertise, constructivist education philosophy, and multimedia to advance the teaching of environmental science (Bower et al., 2011, 2014; Liddicoat and Bower, 2015). In the online simulation and classroom, students form geotechnical consulting companies with a peer chosen at random to solve a problem in environmental forensics. The BA model contains interdisciplinary scientific and social information that are integrated within a digital learning environment that encourages students to construct their knowledge as they learn by doing. As such, the approach improves the depth and coherence of students understanding of the course material. Like real-world environmental consultants and professionals, students are required to develop and apply expertise from a wide range of fields, including environmental science and engineering as well as journalism, medicine, public health, law, civics, economics, and business management. The overall objective is for students to gain an unprecedented appreciation of the complexity, ambiguity, and risk involved in any environmental issue, and to acquire STEM knowledge that can be used constructively when confronted with such an issue.

  13. Efficient electron injection into plasma waves using higher-orderlaser modes

    SciTech Connect

    Michel, P.; Esarey, E.; Schroeder, C.B.; Shadwick, B.A.; Leemans,W.P.

    2006-08-02

    Using higher-order transverse laser modes as drivers forplasma wave excitation, and, in particular, using a ring laser beam withmaximum intensity off-axis, results in reversal of the focusinganddefocusing phase regions in a laser wakefield accelerator. Thisresults in improved performance of self-trapping and laser injectionschemes. Specifically, the trapping threshold required foropticalinjection is decreased and the maximum energy gain of the trappedelectrons is increased. This scheme could also be of interest for thegeneration of ring electron beams or for beam conditioning.

  14. Performance of High-Efficiency Advanced Triple-Junction Solar Panels for the LILT Mission Dawn

    NASA Technical Reports Server (NTRS)

    Fatemi, Navid S.; Sharma, Surya; Buitrago, Oscar; Sharps, Paul R.; Blok, Ron; Kroon, Martin; Jalink, Cees; Harris, Robin; Stella, Paul; Distefano, Sal

    2005-01-01

    NASA's Discovery Mission Dawn is designed to (LILT) conditions. operate within the solar system's Asteroid belt, where the large distance from the sun creates a low-intensity, low-temperature (LILT) condition. To meet the mission power requirements under LlLT conditions, very high-efficiency multi-junction solar cells were selected to power the spacecraft to be built by Orbital Sciences Corporation (OSC) under contract with JPL. Emcore's InGaP/InGaAs/Ge advanced triple-junction (ATJ) solar cells, exhibiting an average air mass zero (AMO) efficiency of greater than 27.6% (one-sun, 28 C), were used to populate the solar panels [1]. The two solar array wings, to be built by Dutch Space, with 5 large- area panels each (total area of 36.4 sq. meters) are projected to produce between 10.3 kWe and 1.3 kWe of end-of life (EOL) power in the 1.0 to 3.0 AU range, respectively. The details of the solar panel design, testing and power analysis are presented.

  15. Efficient removal of insecticide "imidacloprid" from water by electrochemical advanced oxidation processes.

    PubMed

    Turabik, Meral; Oturan, Nihal; Gözmen, Belgin; Oturan, Mehmet A

    2014-01-01

    The oxidative degradation of imidacloprid (ICP) has been carried out by electrochemical advanced oxidation processes (EAOPs), anodic oxidation, and electro-Fenton, in which hydroxyl radicals are generated electrocatalytically. Carbon-felt cathode and platinum or boron-doped diamond (BDD) anodes were used in electrolysis cell. To determine optimum operating conditions, the effects of applied current and catalyst concentration were investigated. The decay of ICP during the oxidative degradation was well fitted to pseudo-first-order reaction kinetics and absolute rate constant of the oxidation of ICP by hydroxyl radicals was found to be k abs(ICP) = 1.23 × 10(9) L mol(-1) s(-1). The results showed that both anodic oxidation and electro-Fenton process with BDD anode exhibited high mineralization efficiency reaching 91 and 94% total organic carbon (TOC) removal at 2 h, respectively. For Pt-EF process, mineralization efficiency was also obtained as 71%. The degradation products of ICP were identified and a plausible general oxidation mechanism was proposed. Some of the main reaction intermediates such as 6-chloronicotinic acid, 6-chloronicotinaldehyde, and 6-hydroxynicotinic acid were determined by GC-MS analysis. Before complete mineralization, formic, acetic, oxalic, and glyoxylic acids were identified as end-products. The initial chlorine and organic nitrogen present in ICP were found to be converted to inorganic anions Cl(-), NO₃(-), and NH₄(+).

  16. Advanced techniques and technology for efficient data storage, access, and transfer

    NASA Technical Reports Server (NTRS)

    Rice, Robert F.; Miller, Warner

    1991-01-01

    Advanced techniques for efficiently representing most forms of data are being implemented in practical hardware and software form through the joint efforts of three NASA centers. These techniques adapt to local statistical variations to continually provide near optimum code efficiency when representing data without error. Demonstrated in several earlier space applications, these techniques are the basis of initial NASA data compression standards specifications. Since the techniques clearly apply to most NASA science data, NASA invested in the development of both hardware and software implementations for general use. This investment includes high-speed single-chip very large scale integration (VLSI) coding and decoding modules as well as machine-transferrable software routines. The hardware chips were tested in the laboratory at data rates as high as 700 Mbits/s. A coding module's definition includes a predictive preprocessing stage and a powerful adaptive coding stage. The function of the preprocessor is to optimally process incoming data into a standard form data source that the second stage can handle.The built-in preprocessor of the VLSI coder chips is ideal for high-speed sampled data applications such as imaging and high-quality audio, but additionally, the second stage adaptive coder can be used separately with any source that can be externally preprocessed into the 'standard form'. This generic functionality assures that the applicability of these techniques and their recent high-speed implementations should be equally broad outside of NASA.

  17. Extending the path for efficient extreme ultraviolet sources for advanced nanolithography

    SciTech Connect

    Sizyuk, Tatyana; Hassanein, Ahmed

    2015-09-15

    Developing efficient light sources for extreme ultraviolet (EUV) lithography is one of the most important problems of high volume manufacturing (HVM) of the next generation computer chips. Critical components of this technology are continued to face challenges in the demanding performance for HVM. Current investigations of EUV and beyond EUV (BEUV) community are focused on the dual-pulse laser produced plasma (LPP) using droplets of mass-limited targets. Two main objectives as well as challenges in the optimization of these light sources are related to enhancement of the conversion efficiency (CE) of the source and increase components lifetime of the collector optical system. These require significant experimental and computer simulation efforts. These requirements call for fine detail analysis of various plasma physics processes involved in laser target interactions and their effects on source optimization. We continued to enhance our comprehensive HEIGHTS simulation package and upgrade our CMUXE laboratories to study and optimize the efficiency of LPP sources. Integrated modeling and experimental research were done to both benchmark simulation results and to make projections and realistic predictions of the development path for powerful EUVL devices for HVM requirements. We continued the detail analysis of dual-pulse laser systems using various laser wavelengths and delay times between the two pulses. We showed that the efficiency of EUV sources can be improved utilizing the higher harmonics of Nd:YAG laser for the prepulse and the first harmonics for the main pulse, while still having lower efficiency than the combination involving CO{sub 2} laser in the range of parameters studied in this case. The differences in optimization process as well as in the source characteristics for two combinations of laser wavelengths were analyzed based on details of atomic and hydrodynamics processes during the evolving plasma plumes.

  18. Extending the path for efficient extreme ultraviolet sources for advanced nanolithography

    NASA Astrophysics Data System (ADS)

    Sizyuk, Tatyana; Hassanein, Ahmed

    2015-09-01

    Developing efficient light sources for extreme ultraviolet (EUV) lithography is one of the most important problems of high volume manufacturing (HVM) of the next generation computer chips. Critical components of this technology are continued to face challenges in the demanding performance for HVM. Current investigations of EUV and beyond EUV (BEUV) community are focused on the dual-pulse laser produced plasma (LPP) using droplets of mass-limited targets. Two main objectives as well as challenges in the optimization of these light sources are related to enhancement of the conversion efficiency (CE) of the source and increase components lifetime of the collector optical system. These require significant experimental and computer simulation efforts. These requirements call for fine detail analysis of various plasma physics processes involved in laser target interactions and their effects on source optimization. We continued to enhance our comprehensive HEIGHTS simulation package and upgrade our CMUXE laboratories to study and optimize the efficiency of LPP sources. Integrated modeling and experimental research were done to both benchmark simulation results and to make projections and realistic predictions of the development path for powerful EUVL devices for HVM requirements. We continued the detail analysis of dual-pulse laser systems using various laser wavelengths and delay times between the two pulses. We showed that the efficiency of EUV sources can be improved utilizing the higher harmonics of Nd:YAG laser for the prepulse and the first harmonics for the main pulse, while still having lower efficiency than the combination involving CO2 laser in the range of parameters studied in this case. The differences in optimization process as well as in the source characteristics for two combinations of laser wavelengths were analyzed based on details of atomic and hydrodynamics processes during the evolving plasma plumes.

  19. Increased efficiency of ion acceleration by using femtosecond laser pulses at higher harmonic frequency

    SciTech Connect

    Psikal, J.; Klimo, O.; Weber, S.; Margarone, D.

    2014-07-15

    The influence of laser frequency on laser-driven ion acceleration is investigated by means of two-dimensional particle-in-cell simulations. When ultrashort intense laser pulse at higher harmonic frequency irradiates a thin solid foil, the target may become re lativistically transparent for significantly lower laser pulse intensity compared with irradiation at fundamental laser frequency. The relativistically induced transparency results in an enhanced heating of hot electrons as well as increased maximum energies of accelerated ions and their numbers. Our simulation results have shown the increase in maximum proton energy and increase in the number of high-energy protons by a factor of 2 after the interaction of an ultrashort laser pulse of maximum intensity 7 × 10{sup 21 }W/cm{sup 2} with a fully ionized plastic foil of realistic density and of optimal thickness between 100 nm and 200 nm when switching from the fundamental frequency to the third harmonics.

  20. Alternative Fuel and Advanced Technology Commercial Lawn Equipment (Spanish version); Clean Cities, Energy Efficiency & Renewable Energy (EERE)

    SciTech Connect

    Nelson, Erik

    2015-06-01

    Powering commercial lawn equipment with alternative fuels or advanced engine technology is an effective way to reduce U.S. dependence on petroleum, reduce harmful emissions, and lessen the environmental impacts of commercial lawn mowing. Numerous alternative fuel and fuel-efficient advanced technology mowers are available. Owners turn to these mowers because they may save on fuel and maintenance costs, extend mower life, reduce fuel spillage and fuel theft, and demonstrate their commitment to sustainability.

  1. Gold-silver@TiO2 nanocomposite-modified plasmonic photoanodes for higher efficiency dye-sensitized solar cells.

    PubMed

    Lim, Su Pei; Lim, Yee Seng; Pandikumar, Alagarsamy; Lim, Hong Ngee; Ng, Yun Hau; Ramaraj, Ramasamy; Bien, Daniel Chia Sheng; Abou-Zied, Osama K; Huang, Nay Ming

    2017-01-04

    In the present investigation, gold-silver@titania (Au-Ag@TiO2) plasmonic nanocomposite materials with different Au and Ag compositions were prepared using a simple one-step chemical reduction method and used as photoanodes in high-efficiency dye-sensitized solar cells (DSSCs). The Au-Ag incorporated TiO2 photoanode demonstrated an enhanced solar-to-electrical energy conversion efficiency of 7.33%, which is ∼230% higher than the unmodified TiO2 photoanode (2.22%) under full sunlight illumination (100 mW cm(-2), AM 1.5G). This superior solar energy conversion efficiency was mainly due to the synergistic effect between the Au and Ag, and their surface plasmon resonance effect, which improved the optical absorption and interfacial charge transfer by minimizing the charge recombination process. The influence of the Au-Ag composition on the overall energy conversion efficiency was also explored, and the optimized composition with TiO2 was found to be Au75-Ag25. This was reflected in the femtosecond transient absorption dynamics in which the electron-phonon interaction in the Au nanoparticles was measured to be 6.14 ps in TiO2/Au75:Ag25, compared to 2.38 ps for free Au and 4.02 ps for TiO2/Au100:Ag0. The slower dynamics indicates a more efficient electron-hole separation in TiO2/Au75:Ag25 that is attributed to the formation of a Schottky barrier at the interface between TiO2 and the noble metal(s) that acts as an electron sink. The significant boost in the solar energy conversion efficiency with the Au-Ag@TiO2 plasmonic nanocomposite showed its potential as a photoanode for high-efficiency DSSCs.

  2. VCM-OFDM technique for advanced space communications system with high spectral efficiency

    NASA Astrophysics Data System (ADS)

    Li, Jionghui; Zhou, Qing; Xiong, Weiming; Zhang, Ying; Yao, Chen

    2016-11-01

    The development of precise scientific payloads brings higher demand on the efficiency of space communications system to transmit the increasing volume of scientific data. Aiming to this issue, Orthogonal Frequency Division Multiplexing (OFDM) is chosen for its inherent capability of high-rate data transmission. Further, considering the dynamic link condition due to satellite orbital motion, we propose a new technique which combines Variable Coding Modulation (VCM) with OFDM to enhance the communication link spectral efficiency with required transmission reliability. With VCM-OFDM technique, the channel coding and modulation mode can be variable with time according to the link conditions, in order to fit the link budget curve and maintain a relatively fixed link margin. Hence, link resource waste can be reduced and throughput can be remarkably improved. Considering that OFDM-based systems are sensitive to Doppler shifts/spread, the coding and modulation mode (CODMOD) selection should be optimized subject to this scenario. This paper introduces the architecture of near-earth space data transmission system based on VCM-OFDM technique. The Doppler influence is analyzed through simulation and the CODMOD selection algorithm is discussed. The results prove the high performance on spectral efficiency enhancement of VCM-OFDM by comparison with several existing alternative methods.

  3. Overview of Heat Addition and Efficiency Predictions for an Advanced Stirling Convertor

    NASA Technical Reports Server (NTRS)

    Wilson, Scott D.; Reid, Terry V.; Schifer, Nicholas A.; Briggs, Maxwell H.

    2012-01-01

    The U.S. Department of Energy (DOE) and Lockheed Martin Space Systems Company (LMSSC) have been developing the Advanced Stirling Radioisotope Generator (ASRG) for use as a power system for space science missions. This generator would use two high-efficiency Advanced Stirling Convertors (ASCs), developed by Sunpower Inc. and NASA Glenn Research Center (GRC). The ASCs convert thermal energy from a radioisotope heat source into electricity. As part of ground testing of these ASCs, different operating conditions are used to simulate expected mission conditions. These conditions require achieving a particular operating frequency, hot end and cold end temperatures, and specified electrical power output for a given net heat input. Microporous bulk insulation is used in the ground support test hardware to minimize the loss of thermal energy from the electric heat source to the environment. The insulation package is characterized before operation to predict how much heat will be absorbed by the convertor and how much will be lost to the environment during operation. In an effort to validate these predictions, numerous tasks have been performed, which provided a more accurate value for net heat input into the ASCs. This test and modeling effort included: (a) making thermophysical property measurements of test setup materials to provide inputs to the numerical models, (b) acquiring additional test data that was collected during convertor tests to provide numerical models with temperature profiles of the test setup via thermocouple and infrared measurements, (c) using multidimensional numerical models (computational fluid dynamics code) to predict net heat input of an operating convertor, and (d) using validation test hardware to provide direct comparison of numerical results and validate the multidimensional numerical models used to predict convertor net heat input. This effort produced high fidelity ASC net heat input predictions, which were successfully validated using

  4. Phase III Advanced Anodes and Cathodes Utilized in Energy Efficient Aluminum Production Cells

    SciTech Connect

    R.A. Christini; R.K. Dawless; S.P. Ray; D.A. Weirauch, Jr.

    2001-11-05

    During Phase I of the present program, Alcoa developed a commercial cell concept that has been estimated to save 30% of the energy required for aluminum smelting. Phase ii involved the construction of a pilot facility and operation of two pilots. Phase iii of the Advanced Anodes and Cathodes Program was aimed at bench experiments to permit the resolution of certain questions to be followed by three pilot cells. All of the milestones related to materials, in particular metal purity, were attained with distinct improvements over work in previous phases of the program. NiO additions to the ceramic phase and Ag additions to the Cu metal phase of the cermet improved corrosion resistance sufficiently that the bench scale pencil anodes met the purity milestones. Some excellent metal purity results have been obtained with anodes of the following composition: Further improvements in anode material composition appear to be dependent on a better understanding of oxide solubilities in molten cryolite. For that reason, work was commissioned with an outside consultant to model the MeO - cryolite systems. That work has led to a better understanding of which oxides can be used to substitute into the NiO-Fe2O3 ceramic phase to stabilize the ferrites and reduce their solubility in molten cryolite. An extensive number of vertical plate bench electrolysis cells were run to try to find conditions where high current efficiencies could be attained. TiB2-G plates were very inconsistent and led to poor wetting and drainage. Pure TiB2 did produce good current efficiencies at small overlaps (shadowing) between the anodes and cathodes. This bench work with vertical plate anodes and cathodes reinforced the importance of good cathode wetting to attain high current efficiencies. Because of those conclusions, new wetting work was commissioned and became a major component of the research during the third year of Phase III. While significant progress was made in several areas, much work needs to be

  5. High Efficiency Thermionics (HET-IV) and Converter Advancement (CAP) programs. Final reports

    SciTech Connect

    Geller, C.B.; Murray, C.S.; Riley, D.R.; Desplat, J.L.; Hansen, L.K.; Hatch, G.L.; McVey, J.B.; Rasor, N.S.

    1996-04-01

    This report contains the final report of the High Efficiency Thermionics (HET-IV) Program, Attachment A, performed at Rasor Associates, Inc. (RAI); and the final report of the Converter Advancement Program (CAP), performed at the Bettis Atomic Power Laboratory, Attachment B. The phenomenology of cesium-oxygen thermionic converters was elucidated in these programs, and the factors that had prevented the achievement of stable, enhanced cesium-oxygen converter performance for the previous thirty years were identified. Based on these discoveries, cesium-oxygen vapor sources were developed that achieved stable performance with factor-of-two improvements in power density and thermal efficiency, relative to conventional, cesium-only ignited mode thermionic converters. Key achievements of the HET-IV/CAP programs are as follows: a new technique for measuring minute traces of oxygen in cesium atmospheres; the determination of the proper range of oxygen partial pressures for optimum converter performance--10{sup {minus}7} to 10{sup {minus}9} torr; the discovery, and analysis of the cesium-oxygen liquid migration and compositional segregation phenomena; the successful use of capillary forces to contain the migration phenomenon; the use of differential heating to control compositional segregation, and induce vapor circulation; the development of mechanically and chemically stable, porous reservoir structures; the development of precise, in situ oxygen charging methods; stable improvements in emitter performance, up to effective emitter bare work functions of 5.4 eV; stable improvements in barrier index, to value below 1.8 Volts; the development of detailed microscopic models for cesium-oxygen reservoir dynamics and collector work function behavior; and the discovery of new relationships between electrode geometry and Schock Instability.

  6. 940nm QCW diode laser bars with 70% efficiency at 1 kW output power at 203K: analysis of remaining limits and path to higher efficiency and power at 200K and 300K

    NASA Astrophysics Data System (ADS)

    Frevert, C.; Bugge, F.; Knigge, S.; Ginolas, A.; Erbert, G.; Crump, P.

    2016-03-01

    Both high-energy-class laser facilities and commercial high-energy pulsed laser sources require reliable optical pumps with the highest pulse power and electro-optical efficiency. Although commercial quasi-continuous wave (QCW) diode laser bars reach output powers of 300…500 W further improvements are urgently sought to lower the cost per Watt, improve system performance and reduce overall system complexity. Diode laser bars operating at temperatures of around 200 K show significant advances in performance, and are particularly attractive in systems that use cryogenically cooled solid state lasers. We present the latest results on 940 nm, passively cooled, 4 mm long QCW diode bars which operate under pulse conditions of 1.2 ms, 10 Hz at an output power of 1 kW with efficiency of 70% at 203 K: a two-fold increase in power compared to 300 K, without compromising efficiency. We discuss how custom low-temperature design of the vertical layers can mitigate the limiting factors such as series resistance while sustaining high power levels. We then focus on the remaining obstacles to higher efficiency and power, and use a detailed study of multiple vertical structures to demonstrate that the properties of the active region are a major performance limit. Specifically, one key limit to series resistance is transport in the layers around the active region and the differential internal efficiency is closely correlated to the threshold current. Tailoring the barriers around the active region and reducing transparency current density thus promise bars with increased performance at temperatures of 200 K as well as 300 K.

  7. Energy efficient--advanced oxidation process for treatment of cyanide containing automobile industry wastewater.

    PubMed

    Mudliar, R; Umare, S S; Ramteke, D S; Wate, S R

    2009-05-30

    Destruction of cyanide (CN) from an automobile industry wastewater by advance oxidation process (AOP) has been evaluated. The operating conditions (in an indigenously designed photoreactor) for three different treatment strategies have been optimized. The treatment strategies involved use of, ultra violet light (UV), hydrogen peroxide (H(2)O(2)) and ozone (O(3)) in various combinations. Treatment of automobile industry wastewater (250 mg/L CN) showed fastest CN destruction, which was significantly (P<0.05) faster than that observed with synthetic wastewater (with similar CN concentration). A combined application of H(2)O(2)/O(3) was found to be the best option for maximum CN destruction. This treatment allows CN to reach the regional/international limit (of 0.02 mg/L) for safe industrial wastewater discharges to the receiving water bodies. The specific energy consumption by the photoreactor following this treatment was comparable to that obtained by conventional treatments, which use photocatalyst. Since the present treatment does not use catalyst, it provides an excellent energy efficient and economical option for treatment and safe disposal of CN containing industrial wastewater.

  8. Efficient Multi-Dimensional Simulation of Quantum Confinement Effects in Advanced MOS Devices

    NASA Technical Reports Server (NTRS)

    Biegel, Bryan A.; Ancona, Mario G.; Rafferty, Conor S.; Yu, Zhiping

    2000-01-01

    We investigate the density-gradient (DG) transport model for efficient multi-dimensional simulation of quantum confinement effects in advanced MOS devices. The formulation of the DG model is described as a quantum correction ot the classical drift-diffusion model. Quantum confinement effects are shown to be significant in sub-100nm MOSFETs. In thin-oxide MOS capacitors, quantum effects may reduce gate capacitance by 25% or more. As a result, the inclusion of quantum effects may reduce gate capacitance by 25% or more. As a result, the inclusion of quantum effects in simulations dramatically improves the match between C-V simulations and measurements for oxide thickness down to 2 nm. Significant quantum corrections also occur in the I-V characteristics of short-channel (30 to 100 nm) n-MOSFETs, with current drive reduced by up to 70%. This effect is shown to result from reduced inversion charge due to quantum confinement of electrons in the channel. Also, subthreshold slope is degraded by 15 to 20 mV/decade with the inclusion of quantum effects via the density-gradient model, and short channel effects (in particular, drain-induced barrier lowering) are noticeably increased.

  9. A novel sputtered Pd mesh architecture as an advanced electrocatalyst for highly efficient hydrogen production

    NASA Astrophysics Data System (ADS)

    de Lucas-Consuegra, Antonio; de la Osa, Ana R.; Calcerrada, Ana B.; Linares, José J.; Horwat, David

    2016-07-01

    This study reports the preparation, characterization and testing of a sputtered Pd mesh-like anode as an advanced electrocatalyst for H2 production from alkaline ethanol solutions in an Alkaline Membrane Electrolyzer (AEM). Pd anodic catalyst is prepared by magnetron sputtering technique onto a microfiber carbon paper support. Scanning Electron Microscopy images reveal that the used preparation technique enables to cover the surface of the carbon microfibers exposed to the Pd target, leading to a continuous network that also maintains part of the original carbon paper macroporosity. Such novel anodic architecture (organic binder free) presents an excellent electro-chemical performance, with a maximum current density of 700 mA cm-2 at 1.3 V, and, concomitantly, a large H2 production rate with low energy requirement compared to water electrolysis. Potassium hydroxide emerges as the best electrolyte, whereas temperature exerts the expected promotional effect up to 90 °C. On the other hand, a 1 mol L-1 ethanol solution is enough to guarantee an efficient fuel supply without any mass transfer limitation. The proposed system also demonstrates to remain stable over 150 h of operation along five consecutives cycles, producing highly pure H2 (99.999%) at the cathode and potassium acetate as the main anodic product.

  10. Efficient Multi-Dimensional Simulation of Quantum Confinement Effects in Advanced MOS Devices

    NASA Technical Reports Server (NTRS)

    Biegel, Bryan A.; Rafferty, Conor S.; Ancona, Mario G.; Yu, Zhi-Ping

    2000-01-01

    We investigate the density-gradient (DG) transport model for efficient multi-dimensional simulation of quantum confinement effects in advanced MOS devices. The formulation of the DG model is described as a quantum correction to the classical drift-diffusion model. Quantum confinement effects are shown to be significant in sub-100nm MOSFETs. In thin-oxide MOS capacitors, quantum effects may reduce gate capacitance by 25% or more. As a result, the inclusion or quantum effects in simulations dramatically improves the match between C-V simulations and measurements for oxide thickness down to 2 nm. Significant quantum corrections also occur in the I-V characteristics of short-channel (30 to 100 nm) n-MOSFETs, with current drive reduced by up to 70%. This effect is shown to result from reduced inversion charge due to quantum confinement of electrons in the channel. Also, subthreshold slope is degraded by 15 to 20 mV/decade with the inclusion of quantum effects via the density-gradient model, and short channel effects (in particular, drain-induced barrier lowering) are noticeably increased.

  11. The Effects of Using Concept Mapping for Improving Advanced Level Biology Students' Lower- and Higher-Order Cognitive Skills

    NASA Astrophysics Data System (ADS)

    Bramwell-Lalor, Sharon; Rainford, Marcia

    2014-03-01

    This paper reports on teachers' use of concept mapping as an alternative assessment strategy in advanced level biology classes and its effects on students' cognitive skills on selected biology concepts. Using a mixed methods approach, the study employed a pre-test/post-test quasi-experimental design involving 156 students and 8 teachers from intact classes. A researcher-constructed Biology Cognitive Skills Test was used to collect the quantitative data. Qualitative data were collected through interviews and students' personal documents. The data showed that the participants utilized concept mapping in various ways and they described positive experiences while being engaged in its use. The main challenge cited by teachers was the limited time available for more consistent use. The results showed that the use of concept mapping in advanced level biology can lead to learning gains that exceed those achieved in classes where mainly traditional methods are used. The students in the concept mapping experimental groups performed significantly better than their peers in the control group on both the lower-order (F(1) = 21.508; p < .001) and higher-order (F(1) = 42.842, p < .001) cognitive items of the biology test. A mean effect size of .56 was calculated representing the contribution of treatment to the students' performance on the test items.

  12. High-efficiency helical traveling-wave tube with dynamic velocity taper and advanced multistage depressed collector

    NASA Technical Reports Server (NTRS)

    Curren, Arthur N.; Palmer, Raymond W.; Force, Dale A.; Dombro, Louis; Long, James A.

    1987-01-01

    A NASA-sponsored research and development contract has been established with the Watkins-Johnson Company to fabricate high-efficiency 20-watt helical traveling wave tubes (TWTs) operating at 8.4 to 8.43 GHz. The TWTs employ dynamic velocity tapers (DVTs) and advanced multistage depressed collectors (MDCs) having electrodes with low secondary electron emission characteristics. The TWT designs include two different DVTs; one for maximum efficiency and the other for minimum distortion and phase shift. The MDC designs include electrodes of untreated and ion-textured graphite as well as copper which has been treated for secondary electron emission suppression. Objectives of the program include achieving at least 55 percent overall efficiency. Tests with the first TWTs (with undepressed collectors) indicate good agreement between predicted and measured RF efficiencies with as high as 30 percent improvement in RF efficiency over conventional helix designs.

  13. Cost-efficiency assessment of Advanced Life Support (ALS) courses based on the comparison of advanced simulators with conventional manikins

    PubMed Central

    Iglesias-Vázquez, José Antonio; Rodríguez-Núñez, Antonio; Penas-Penas, Mónica; Sánchez-Santos, Luís; Cegarra-García, Maria; Barreiro-Díaz, Maria Victoria

    2007-01-01

    Background Simulation is an essential tool in modern medical education. The object of this study was to assess, in cost-effective measures, the introduction of new generation simulators in an adult life support (ALS) education program. Methods Two hundred fifty primary care physicians and nurses were admitted to ten ALS courses (25 students per course). Students were distributed at random in two groups (125 each). Group A candidates were trained and tested with standard ALS manikins and Group B ones with new generation emergency and life support integrated simulator systems. Results In group A, 98 (78%) candidates passed the course, compared with 110 (88%) in group B (p < 0.01). The total cost of conventional courses was €7689 per course and the cost of the advanced simulator courses was €29034 per course (p < 0.001). Cost per passed student was €392 in group A and €1320 in group B (p < 0.001). Conclusion Although ALS advanced simulator systems may slightly increase the rate of students who pass the course, the cost-effectiveness of ALS courses with standard manikins is clearly superior. PMID:17953771

  14. Leveraging Smart Meter Data through Advanced Analytics: Applications to Building Energy Efficiency

    NASA Astrophysics Data System (ADS)

    Jalori, Saurabh

    The poor energy efficiency of buildings is a major barrier to alleviating the energy dilemma. Historically, monthly utility billing data was widely available and analytical methods for identifying building energy efficiency improvements, performing building Monitoring and Verification (M&V) and continuous commissioning (CCx) were based on them. Although robust, these methods were not sensitive enough to detect a number of common causes for increased energy use. In recent years, prevalence of short-term building energy consumption data, also known as Energy Interval Data (EID), made available through the Smart Meters, along with data mining techniques presents the potential of knowledge discovery inherent in this data. This allows more sophisticated analytical tools to be developed resulting in greater sensitivities due to higher prediction accuracies; leading to deep energy savings and highly efficient building system operations. The research explores enhancements to Inverse Statistical Modeling techniques due to the availability of EID. Inverse statistical modeling is the process of identification of prediction model structure and estimates of model parameters. The methodology is based on several common statistical and data mining techniques: cluster analysis for day typing, outlier detection and removal, and generation of building scheduling. Inverse methods are simpler to develop and require fewer inputs for model identification. They can model changes in energy consumption based on changes in climatic variables and up to a certain extent, occupancy. This makes them easy-to-use and appealing to building managers for evaluating any general retrofits, building condition monitoring, continuous commissioning and short-term load forecasting (STLF). After evaluating several model structures, an elegant model form was derived which can be used to model daily energy consumption; which can be extended to model energy consumption for any specific hour by adding corrective

  15. ATP and heat production in human skeletal muscle during dynamic exercise: higher efficiency of anaerobic than aerobic ATP resynthesis

    PubMed Central

    Krustrup, Peter; Ferguson, Richard A; Kjær, Michael; Bangsbo, Jens

    2003-01-01

    The aim of the present study was to simultaneously examine skeletal muscle heat production and ATP turnover in humans during dynamic exercise with marked differences in aerobic metabolism. This was done to test the hypothesis that efficiency is higher in anaerobic than aerobic ATP resynthesis. Six healthy male subjects performed 90 s of low intensity knee-extensor exercise with (OCC) and without thigh occlusion (CON-LI) as well as 90 s of high intensity exercise (CON-HI) that continued from the CON-LI bout. Muscle heat production was determined by continuous measurements of muscle heat accumulation and heat release to the blood. Muscle ATP production was quantified by repeated measurements of thigh oxygen uptake as well as blood and muscle metabolite changes. All temperatures of the thigh were equalized to ≈37 °C prior to exercise by a water-perfused heating cuff. Oxygen uptake accounted for 80 ± 2 and 59 ± 4 %, respectively, of the total ATP resynthesis in CON-LI and CON-HI, whereas it was negligible in OCC. The rise in muscle temperature was lower (P < 0.05) in OCC than CON-LI (0.32 ± 0.04 vs. 0.37 ± 0.03 °C). The mean rate of heat production was also lower (P < 0.05) in OCC than CON-LI (36 ± 4 vs. 57 ± 4 J s−1). Mechanical efficiency was 52 ± 4 % after 15 s of OCC and remained constant, whereas it decreased (P < 0.05) from 56 ± 5 to 32 ± 3 % during CON-LI. During CON-HI, mechanical efficiency transiently increased (P < 0.05) to 47 ± 4 %, after which it decreased (P < 0.05) to 36 ± 3 % at the end of CON-HI. Assuming a fully coupled mitochondrial respiration, the ATP turnover per unit of work was calculated to be unaltered during OCC (≈20 mmol ATP kJ−1), whereas it increased (P < 0.05) from 21 ± 4 to 29 ± 3 mmol ATP kJ−1 during CON-LI and further (P < 0.05) to 37 ± 3 mmol ATP kJ−1 during CON-HI. The present data confirm the hypothesis that heat loss is lower in anaerobic ATP resynthesis than in oxidative phosphorylation and can in part

  16. Gross efficiency and cycling economy are higher in the field as compared with on an Axiom stationary ergometer.

    PubMed

    Bertucci, William M; Betik, Andrew C; Duc, Sebastien; Grappe, Frederic

    2012-12-01

    This study was designed to examine the biomechanical and physiological responses between cycling on the Axiom stationary ergometer (Axiom, Elite, Fontaniva, Italy) vs. field conditions for both uphill and level ground cycling. Nine cyclists performed cycling bouts in the laboratory on an Axiom stationary ergometer and on their personal road bikes in actual road cycling conditions in the field with three pedaling cadences during uphill and level cycling. Gross efficiency and cycling economy were lower (-10%) for the Axiom stationary ergometer compared with the field. The preferred pedaling cadence was higher for the Axiom stationary ergometer conditions compared with the field conditions only for uphill cycling. Our data suggests that simulated cycling using the Axiom stationary ergometer differs from actual cycling in the field. These results should be taken into account notably for improving the precision of the model of cycling performance, and when it is necessary to compare two cycling test conditions (field/laboratory, using different ergometers).

  17. Nitrogen Use Efficiency of California Almond Orchards Using Advanced Farming Practices

    NASA Astrophysics Data System (ADS)

    Smart, David; Schellenberg, Daniel; Saa Silva, Sebastian; Muhammad, Saiful; Sanden, Blake; Brown, Patrick

    2014-05-01

    Mobilization of reactive nitrogen species (NH3, NH4+, NOx, N2O, NO2- and NO3-) is perceived as one of the foremost challenges for modern agricultural production systems. Yet information to address the question of how advanced nitrogen (N) management alters reactive N mobilization is lacking. During 2009 to 2012 we monitored spatially constrained N2O emissions and potential leachable NO3-, along with yield-N content to examine their contribution to nitrogen use efficiency (NUE, fruit-N exported/fertilizer-N applied) for a modern, high yielding almond production system. This modern production system schedules irrigation to match evapotranspiration (ETc) estimated from the Penman-Montieth calculation of a reference evapotranspiration (ETo) times a seasonal crop coefficient (Kc) which was verified using eddy covariance and surface renewal latent heat flux estimates. Split N-fertilizer applications were targeted to tree-N demand and root proliferation. These production systems demand upwards of 300 kg N ha-1. NUE was found to be nearly 80% at an N application level allowing for economic sustainability of the system (308 kg N ha-1). When mobilization of N2O and NO3- were included in the NUE assessment, these systems were still highly sustainable in terms of N applied. We also monitored production and consumption of the greenhouse gases of carbon dioxide (CO2) and methane (CH4). These systems had relatively low levels of N2O emissions with emissions of N2O as a fraction of N-fertilizer applied being consistently less than IPCC Tier 1 emissions factors, and lower than the average estimated for most continental US farming systems. The system also demonstrated a capacity for net CH4 oxidation over the course of a season that occurred mainly in the driveways between tree rows that are kept dry over the course of the season in this arid environment. Our study indicated that tight management of water resources and targeted applications of N-fertilizer resulted in net positive

  18. Advanced treatment planning methods for efficient radiation therapy with laser accelerated proton and ion beams

    SciTech Connect

    Schell, Stefan; Wilkens, Jan J.

    2010-10-15

    lateral clustering and reduce the number of particles that have to be blocked in the beam delivery system. Furthermore, the optimization routine can be adjusted to reduce the number of dose spots and laser shots. The authors implemented these methods into a research treatment planning system for laser accelerated particles. Results: The authors' proposed methods can decrease the amount of secondary radiation produced when blocking particles with wrong energies or when reducing the total number of particles from one laser shot. Additionally, caused by the efficient use of the beam, the treatment time is reduced considerably. Both improvements can be achieved without extensively changing the quality of the treatment plan since conventional intensity modulated particle therapy usually includes a certain amount of unused degrees of freedom which can be used to adapt to laser specific properties. Conclusions: The advanced beam delivery and treatment planning methods reduce the need to have a perfect laser-based accelerator reproducing the properties of conventional accelerators that might not be possible without increasing treatment time and secondary radiation to the patient. The authors show how some of the differences to conventional beams can be overcome and efficiently used for radiation treatment.

  19. Second Generation Advanced Reburning for High Efficiency N0x Control

    SciTech Connect

    Zamansky, Vladimir M.; Maly, Peter, M.; Sheldon, Mark; Seeker, W. Randall; Folsom, Blair A.

    1997-12-31

    Energy and Environmental Research Corporation is developing a family of high efficiency and low cost NO{sub x} control technologies for coal fired utility boilers based on Advanced Reburning (AR), a synergistic integration of basic reburning with injection of an N-agent. In conventional AR, injection of the reburn fuel is followed by simultaneous N-agent and overfire air injection. The second generation AR systems incorporate several components which can be used in different combinations. These components include: (1) Reburning Injection of the reburn fuel and overfire air. (2) N-agent Injection The N-agent (ammonia or urea) can be injected at different locations: into the reburning zone, along with the overfire air, and downstream of the overfire air injection. (3) N-agent Promotion Several sodium compounds can considerably enhance the NO{sub x} control from N-agent injection. These ''promoters'' can be added to aqueous N-agents. (4) Two Stages of N-agent Injection and Promotion Two N-agents with or without promoters can be injected at different locations for deeper NO{sub x} control. AR systems are intended for post-RACT applications in ozone non-attainment areas where NO{sub x} control in excess of 80% is required. AR will provide flexible installations that allow NO{sub x} levels to be lowered when regulations become more stringent. The total cost of NO{sub x} control for AR systems is approximately half of that for SCR. Experimental and kinetic modeling results for development of these novel AR systems are presented. Tests have been conducted in a 1.0 MMBtu/hr Boiler Simulator Facility with coal as the main fuel and natural gas as the reburning fuel. The results show that high efficiency NO{sub x} control, in the range 84-95%, can be achieved with various elements of AR. A comparative byproduct emission study was performed to compare the emissions from different variants of AR with commercial technologies (reburning and SNCR). For each technology sampling

  20. Higher metastatic efficiency of KRas G12V than KRas G13D in a colorectal cancer model.

    PubMed

    Alamo, Patricia; Gallardo, Alberto; Di Nicolantonio, Federica; Pavón, Miguel Angel; Casanova, Isolda; Trias, Manuel; Mangues, María Antonia; Lopez-Pousa, Antonio; Villaverde, Antonio; Vázquez, Esther; Bardelli, Alberto; Céspedes, María Virtudes; Mangues, Ramón

    2015-02-01

    Although all KRas (protein that in humans is encoded by the KRas gene) point mutants are considered to have a similar prognostic capacity, their transformation and tumorigenic capacities vary widely. We compared the metastatic efficiency of KRas G12V (Kirsten rat sarcoma viral oncogene homolog with valine mutation at codon 12) and KRas G13D (Kirsten rat sarcoma viral oncogene homolog with aspartic mutation at codon 13) oncogenes in an orthotopic colorectal cancer (CRC) model. Following subcutaneous preconditioning, recombinant clones of the SW48 CRC cell line [Kras wild-type (Kras WT)] expressing the KRas G12V or KRas G13D allele were microinjected in the mouse cecum. The percentage of animals developing lymph node metastasis was higher in KRas G12V than in KRas G13D mice. Microscopic, macroscopic, and visible lymphatic foci were 1.5- to 3.0-fold larger in KRas G12V than in KRas G13D mice (P < 0.05). In the lung, only microfoci were developed in both groups. KRas G12V primary tumors had lower apoptosis (7.0 ± 1.2 vs. 7.4 ± 1.0 per field, P = 0.02), higher tumor budding at the invasion front (1.2 ± 0.2 vs. 0.6 ± 0.1, P = 0.04), and a higher percentage of C-X-C chemokine receptor type 4 (CXCR4)-overexpressing intravasated tumor emboli (49.8 ± 9.4% vs. 12.8 ± 4.4%, P < 0.001) than KRas G13D tumors. KRas G12V primary tumors showed Akt activation, and β5 integrin, vascular endothelial growth factor A (VEGFA), and Serpine-1 overexpression, whereas KRas G13D tumors showed integrin β1 and angiopoietin 2 (Angpt2) overexpression. The increased cell survival, invasion, intravasation, and specific molecular regulation observed in KRas G12V tumors is consistent with the higher aggressiveness observed in patients with CRC expressing this oncogene.

  1. Advancing Resource Efficiency in the Supply Chain - Observations and Opportunities for Action

    EPA Pesticide Factsheets

    This document provides U.S. EPA’s perspectives on the discussions at the G7 Alliance on Resource Efficiency U.S.-hosted Workshop on the Use of Life Cycle Concepts in Supply Chain Management to Achieve Resource Efficiency that was held March 22-23, 2016.

  2. PAC, a novel curcumin analogue, has anti-breast cancer properties with higher efficiency on ER-negative cells.

    PubMed

    Al-Hujaily, Ensaf M; Mohamed, Ameera Gaafar; Al-Sharif, Ibtehaj; Youssef, Khairia M; Manogaran, Pulicat S; Al-Otaibi, Basem; Al-Haza'a, Amal; Al-Jammaz, Ibrahim; Al-Hussein, Khaled; Aboussekhra, Abdelilah

    2011-07-01

    We have investigated here the anti-breast cancer properties of two novel curcumin analogues, EAC and PAC. Apoptosis was assessed by the annexin V/propidium iodide (PI) assay on different breast cancer and normal cells. Immunoblotting analysis determined the effects of these agents on different apoptotic and oncogenic proteins. Furthermore, flow cytometry and Elispot were utilised to investigate the effects on the cell cycle and the production of cytokines, respectively. Breast cancer tumour xenografts were developed in nude mice. Finally, (18)F-radiolabeled PAC and curcumin were produced to study their bioavailability and tissue biodistribution in mice. PAC is five times more efficient than curcumin and EAC in inducing apoptosis, mainly via the internal mitochondrial route. This effect was 10-fold higher against ER-negative as compared to ER-positive cells, and ectopic expression of ERα rendered ER-negative breast cancer cells more resistant to PAC. In addition, PAC delayed the cell cycle at G2/M phase with a stronger effect on ER-negative cells. Moreover, PAC exhibited strong capacity as an immuno-inducer through reducing the secretion of the two major Th2 cytokines IL-4 and IL-10. Importantly, PAC significantly reduced tumour size, and triggered apoptosis in vivo. Furthermore, PAC inhibited survivin, NF-kB and its downstream effectors cyclin D1 and Bcl-2, and strongly up-regulated p21(WAF1) both in vitro and in tumours. Besides, PAC exhibited higher stability in blood and greater biodistribution and bioavailability than curcumin in mice. These results indicate that PAC could constitute a powerful, yet not toxic, new chemotherapeutic agent against ER-negative breast tumours.

  3. Development of Low-Cost High Efficiency Commercial Ready Advanced Silicon Solar Cells

    SciTech Connect

    Rohatgi, Ajeet; Zimbardi, Francesco

    2015-01-30

    As a result of the work within this project manufacturing ready devices were developed using 4 different promising Si material technologies with final efficiencies between 20.1% and 21.2%. The starting efficiencies for the FPACE I project were based on best manufactured p-type and n-type cells at the start of the project in 2011. Target efficiencies proposed for the project were 21% for p-type CZ, 20% for p-type cast Si, 21% for n-type and 20% for epi. All Target efficiencies were met or exceeded by the end of the project in 2014. The figure below list displays the 4 highest performing structures for each material with corresponding achieved efficiencies.

  4. Advanced nanostructured materials and their application for improvement of sun-light harvesting and efficiency of solar cells

    NASA Astrophysics Data System (ADS)

    Dimova-Malinovska, D.

    2016-02-01

    This review describes the application of different nanostructured materials in solar cells technology for improvement of sun-light harvesting and their efficiency. Several approaches have recently been proposed to increase the efficiency of solar cells above the theoretical limit which are based on a “photon management” concept that employs such phenomena as: (i) down-conversion, and (ii) surface plasmon resonance effect (iii) decreasing of the loss due to the reflection of the radiation, (iv) increasing of the reflection from the back contact, v) increasing of the effective solar cells surface, etc. The results demonstrate the possibility for to increasing of light harvesting, short circuit current and efficiency by application of nanomaterials in thin film and hetero-junction (HJ) solar cells. The first promising results allow an expectation for application of advanced nanomaterials in the 3d generation solar cells.

  5. Efficient, High-Torque Electric Vehicle Motor: Advanced Electric Vehicle Motors with Low or No Rare Earth Content

    SciTech Connect

    2012-01-01

    REACT Project: QM Power will develop a new type of electric motor with the potential to efficiently power future generations of EVs without the use of rare-earth-based magnets. Many of today’s EV motors use rare earth magnets to efficiently provide torque to the wheels. QM Power’s motors would contain magnets that use no rare earth minerals, are light and compact, and can deliver more power with greater efficiency and at reduced cost. Key innovations in this project include a new motor design with iron-based magnetic materials, a new motor control technique, and advanced manufacturing techniques that substantially reduce the cost of the motor. The ultimate goal of this project is to create a cost-effective EV motor that offers the rough peak equivalent of 270 horsepower.

  6. High-Efficiency Rooftop Air Conditioners: Innovative Procurement to Achieve Advances in Technology

    SciTech Connect

    Hollomon, Brad

    2003-08-01

    The U.S. Department of Energy, Defense Logistics Agency, and Pacific Northwest National Laboratory recently conducted a technology procurement to increase the availability of energy-efficient, packaged unitary ''rooftop'' air conditioners. The procurement encouraged air conditioner manufacturers to produce equipment that exceeded US energy efficiency standards by at least 25% at a lower life-cycle cost. An outgrowth of the project, a web-based cost estimator tool is now available to help consumers determine the cost-effectiveness of purchasing energy-efficient air conditioners based on climate conditions and other factors at their own locations.

  7. Recent advances in power efficient output stage for high density implantable stimulators.

    PubMed

    Sooksood, Kriangkrai; Noorsal, Emilia; Bihr, Ulrich; Ortmanns, Maurits

    2012-01-01

    A major drawback of a current-controlled stimulation is its power efficiency. However, it is commonly used in implantable stimulators due to its safety. The power efficiency of a current-controlled stimulation can be improved by reducing the headroom voltage needed in the current driver. A promising technique is to bias the transistor in triode region whereas improving output impedance through the regulated cascode structure. This comes with a feature of implicit compliance monitor which is used for the supply voltage adaptation. This paper presents an overview on recent power efficient high voltage-compliance output drivers.

  8. Advanced high efficiency concentrator cells. Final subcontractor report, 1 October 1988--31 March 1990

    SciTech Connect

    Gale, R.

    1992-06-01

    This report describes research to develop the technology needed to demonstrate a monolithic, multijunction, two-terminal, concentrator solar cell with a terrestrial power conversion efficiency greater than 35%. Under three previous subcontracts, Varian developed many of the aspects of a technology needed to fabricate very high efficiency concentrator cells. The current project was aimed at exploiting the new understanding of high efficiency solar cells. Key results covered in this report are as follows. (1) A 1.93-eV AlGaAs/1.42-eV GaAs metal-interconnected cascade cell was manufactured with a one-sun efficiency at 27.6% at air mass 1.5 (AM1.5) global. (2) A 1.0eV InGaAs cell was fabricated on the ``reverse`` side of a low-doped GaAs substrate with a one-sun efficiency of 2.5% AM1.5 diffuse and a short-circuit current of 14.4 mA/cm{sup 2}. (3) Small-scale manufacturing of GaAs p/n concentrator cells was attempted and obtained an excellent yield of high-efficiency cells. (4) Grown-in tunnel junction cell interconnects that are transparent and thermally stable using C and Si dopants were developed. 10 refs.

  9. Application of a Tractive Energy Analysis to Quantify the Benefits of Advanced Efficiency Technologies Using Characteristic Drive Cycle Data

    SciTech Connect

    LaClair, Tim J

    2012-01-01

    Accurately predicting the fuel savings that can be achieved with the implementation of various technologies developed for fuel efficiency can be very challenging, particularly when considering combinations of technologies. Differences in the usage of highway vehicles can strongly influence the benefits realized with any given technology, which makes generalizations about fuel savings inappropriate for different vehicle applications. A model has been developed to estimate the potential for reducing fuel consumption when advanced efficiency technologies, or combinations of these technologies, are employed on highway vehicles, particularly medium- and heavy-duty trucks. The approach is based on a tractive energy analysis applied to drive cycles representative of the vehicle usage, and the analysis specifically accounts for individual energy loss factors that characterize the technologies of interest. This tractive energy evaluation is demonstrated by analyzing measured drive cycles from a long-haul trucking fleet and the results of an assessment of the fuel savings potential for combinations of technologies are presented. The results of this research will enable more reliable estimates of the fuel savings benefits that can be realized with particular technologies and technology combinations for individual trucking applications so that decision makers can make informed investment decisions for the implementation of advanced efficiency technologies.

  10. High Efficiency Space Power Systems Project Advanced Space-Rated Batteries

    NASA Technical Reports Server (NTRS)

    Reid, Concha M.

    2011-01-01

    Case Western Reserve University (CWRU) has an agreement with China National Offshore Oil Corporation New Energy Investment Company, Ltd. (CNOOC), under the United States-China EcoPartnerships Framework, to create a bi-national entity seeking to develop technically feasible and economically viable solutions to energy and environmental issues. Advanced batteries have been identified as one of the initial areas targeted for collaborations. CWRU invited NASA Glenn Research Center (GRC) personnel from the Electrochemistry Branch to CWRU to discuss various aspects of advanced battery development as they might apply to this partnership. Topics discussed included: the process for the selection of a battery chemistry; the establishment of an integrated development program; project management/technical interactions; new technology developments; and synergies between batteries for automotive and space operations. Additional collaborations between CWRU and NASA GRC's Electrochemistry Branch were also discussed.

  11. Advanced Nanoscale Thin Film & Bulk Materials Towards Thermoelectric Power Conversion Efficiencies of 30%

    DTIC Science & Technology

    2014-02-27

    APS, November 12-14, 2009, abstract #G2.007 4) R. Venkatasubramanian, G. Bulman, P. Barletta, J. Stuart & T. Colpitts, Thin-film 2-di superlattices...Presentation), JHU/APL WALEX Advanced Portable Power Systems Workshop, Johns Hopkins University, Laurel, MD, June 24, 2010 6) R. Venkatasubramanian, G...Bulman, P. Barletta, J. Stuart & T. Colpitts, High Figure of Merit Thin-film Superlattice Thermoelectric Materials and Devices (Invited Presentation

  12. Advanced search of the electronic medical record: augmenting safety and efficiency in radiology.

    PubMed

    Zalis, Michael; Harris, Mitchell

    2010-08-01

    The integration of electronic medical record (EMR) systems into clinical practice has been spurred by general consensus and recent federal incentives and is set to become a standard feature of clinical practice in the US. We discuss how the addition of advanced search capabilities to the EMR can improve the radiologist's ability to integrate contextual data into workflows associated with both for diagnostic and interventional procedures.

  13. Engaging, Retaining, and Advancing African Americans in Executive-Level Positions: A Descriptive and Trend Analysis of Academic Administrators in Higher and Postsecondary Education

    ERIC Educational Resources Information Center

    Jackson, Jerlando F. L.

    2004-01-01

    In spite of repeated considerations and positive action to engage, retain and advance African Americans in executive positions, there are only a few African Americans in executive level administration posts in colleges and universities. An analysis of the status of African Americans in higher and post secondary education shows that legislation…

  14. What Are the Consequences of the Newly Implemented 24+Advanced Learning Loans on Retention of Adult Access to Higher Education Students?

    ERIC Educational Resources Information Center

    Burns, Jane Marie; Slack, Kim

    2015-01-01

    This article discusses the previous literature on student retention in the post-compulsory education sector and the "24+Advanced Learning Loan". Adult students participating in an Access to Higher Education course are at particularly high risk of non-completion. Literature indicates that whilst stakeholders may require factual statistics…

  15. Quantifying the Operational Benefits of Conventional and Advanced Pumped Storage Hydro on Reliability and Efficiency: Preprint

    SciTech Connect

    Krad, I.; Ela, E.; Koritarov, V.

    2014-07-01

    Pumped storage hydro (PSH) plants have significant potential to provide reliability and efficiency benefits in future electric power systems with high penetrations of variable generation. New PSH technologies, such as adjustable-speed PSH, have been introduced that can also present further benefits. This paper demonstrates and quantifies some of the reliability and efficiency benefits afforded by PSH plants by utilizing the Flexible Energy Scheduling Tool for the Integration of Variable generation (FESTIV), an integrated power system operations tool that evaluates both reliability and production costs.

  16. Advanced treatment of municipal secondary effluent by catalytic ozonation using Fe3O4-CeO2/MWCNTs as efficient catalyst.

    PubMed

    Bai, Zhiyong; Wang, Jianlong; Yang, Qi

    2017-02-23

    The advanced treatment of municipal secondary effluent was performed by catalytic ozonation using Fe3O4-CeO2/MWCNTs as catalyst. The experimental results showed that in catalytic ozonation system, the removal efficiency of soluble COD was more than 46% after 30 min reaction, and about 36% of effluent organic matters (EfOMs) were mineralized, which was four times higher than that in single ozonation system. Moreover, proteins, humic acids, and UV254 decreased obviously after 30 min reaction, but polysaccharides did not significantly decrease. In catalytic ozonation system, the ozone utilization increased, which is favorable for the degradation of EfOM. The organic compounds and alkalinity were the main hydroxyl radical consumers in municipal secondary effluent. The catalytic ozonation process was also effective for the degradation of two target micropollutants (sulfamethazine and carbamazepine). The catalyst could be stable after five-time reuse for catalytic ozonation of effluent.

  17. Recent advances in efficient long-life, eye-safe solid state and CO2 lasers for laser radar applications

    NASA Technical Reports Server (NTRS)

    Hess, R. V.; Buoncristiani, A. M.; Brockman, P.; Bair, C. H.; Schryer, D. R.; Upchurch, B. T.; Wood, G. M.

    1989-01-01

    The key problems in the development of eye-safe solid-state lasers are discussed, taking into account the energy transfer mechanisms between the complicated energy level manifolds of the Tm, Ho, Er ion dopants in hosts with decreasing crystal fields such as YAG or YLF. Optimization of energy transfer for efficient lasing through choice of dopant concentration, power density, crystal field and temperature is addressed. The tailoring of energy transfer times to provide efficient energy extraction for short pulses used in DIAL and Doppler lidar is considered. Recent advances in Pt/SnO2 oxide catalysts and other noble metal/metal oxide combinations for CO2 lasers are discussed. Emphasis is given to the dramatic effects of small quantities of H2O vapor for increasing the activity and lifetime of Pt/SnO2 catalysts and to increased lifetime operation with rare isotope (C-12)(O-18)2 lasing mixtures.

  18. Final LDRD report : design and fabrication of advanced device structures for ultra high efficiency solid state lighting.

    SciTech Connect

    Koleske, Daniel David; Bogart, Katherine Huderle Andersen; Shul, Randy John; Wendt, Joel Robert; Crawford, Mary Hagerott; Allerman, Andrew Alan; Fischer, Arthur Joseph

    2005-04-01

    The goal of this one year LDRD was to improve the overall efficiency of InGaN LEDs by improving the extraction of light from the semiconductor chip. InGaN LEDs are currently the most promising technology for producing high efficiency blue and green semiconductor light emitters. Improving the efficiency of InGaN LEDs will enable a more rapid adoption of semiconductor based lighting. In this LDRD, we proposed to develop photonic structures to improve light extraction from nitride-based light emitting diodes (LEDs). While many advanced device geometries were considered for this work, we focused on the use of a photonic crystal for improved light extraction. Although resonant cavity LEDs and other advanced structures certainly have the potential to improve light extraction, the photonic crystal approach showed the most promise in the early stages of this short program. The photonic crystal (PX)-LED developed here incorporates a two dimensional photonic crystal, or photonic lattice, into a nitride-based LED. The dimensions of the photonic crystal are selected such that there are very few or no optical modes in the plane of the LED ('lateral' modes). This will reduce or eliminate any radiation in the lateral direction so that the majority of the LED radiation will be in vertical modes that escape the semiconductor, which will improve the light-extraction efficiency. PX-LEDs were fabricated using a range of hole diameters and lattice constants and compared to control LEDs without a photonic crystal. The far field patterns from the PX-LEDs were dramatically modified by the presence of the photonic crystal. An increase in LED brightness of 1.75X was observed for light measured into a 40 degree emission cone with a total increase in power of 1.5X for an unencapsulated LED.

  19. Equity and Efficiency in Greek Higher Education Policies in the Past Three Decades: A Shift of Emphasis to the Issue of Efficiency/"Quality Assurance" in the 2000s

    ERIC Educational Resources Information Center

    Prokou, Eleni

    2013-01-01

    This article argues that, in Greek higher education policies of the 2000s, "equality of educational opportunities" is not given as much importance as in the 1980s and the 1990s, when higher education had been massively expanded. In the 2000s, the issue of equity is giving way to that of efficiency/quality, in accordance with a neoliberal…

  20. Deep-ultraviolet light-emitting diodes with external quantum efficiency higher than 20% at 275 nm achieved by improving light-extraction efficiency

    NASA Astrophysics Data System (ADS)

    Takano, Takayoshi; Mino, Takuya; Sakai, Jun; Noguchi, Norimichi; Tsubaki, Kenji; Hirayama, Hideki

    2017-03-01

    Enhancing the light-extraction efficiency is the key issue for realizing highly efficient AlGaN-based ultraviolet light-emitting diodes (UV-LEDs). We introduced several features to improve the light extraction: a transparent AlGaN:Mg contact layer, a Rh mirror electrode, an AlN template on a patterned sapphire substrate, and encapsulation resin. The combination of the AlGaN:Mg contact layer and the Rh mirror electrode significantly improved the output power and the external quantum efficiency (EQE) of UV-LEDs. By introducing the aforementioned features, a maximum EQE of >20% at an emission wavelength of 275 nm and a 20-mA direct current was achieved.

  1. Procuring High-Efficiency Air Conditioners: Harnessing Competition to Achieve Advances in Technology

    SciTech Connect

    Hollomon, J Bradford; Gordon, Kelly L.

    2002-03-01

    The Departments of Energy and Defense have joined forces to devise an innovative approach to acquiring more efficient unitary air conditioners that minimize life-cycle cost through improved technology. The resulting procurement solicitation challenges manufacturers to offer products with reduced life-cycle cost, taking into account both the initial prices of their units and the costs of their ongoing electric consumption. Competing products are evaluated according to a formula that reflects both full- and part-load efficiencies under a simulated set of time-varying climate conditions. The authors will report on the progress of the procurement, including the choice of target product based on market prospects and technology readiness, development of the technical specifications and electric consumption simulator, approaches to administrative and procedural challenges, responses from manufacturers, and plans for product promotion in the future.

  2. The Advanced Placement Program in Pennsylvania: Implications for Policy and Practice in K-12 and Higher Education

    ERIC Educational Resources Information Center

    Liekar, Christine Y.

    2012-01-01

    Since the time of Sputnik, American educators and policymakers have recognized the need to raise expectations by increasing rigor in high schools across the United States. Copious studies attest to the fact that students who take Advanced Placement coursework experience success in college (Adelman, 1999; Camara, 2003; College Board, 2005;…

  3. Learning to Be Leaders in Higher Education: What Helps or Hinders Women's Advancement as Leaders in Universities

    ERIC Educational Resources Information Center

    Airini; Collings, Sunny; Conner, Lindsey; McPherson, Kathryn; Midson, Brenda; Wilson, Cheryl

    2011-01-01

    This article examines 110 reported incidents from an online survey of 26 women from each of the eight universities in New Zealand. They responded to questions asking them to describe times when work and non-work situations have helped or hindered their advancement in university leadership roles. Five key themes, incorporating a range of factors,…

  4. Barriers to and Facilitators of Female Deans' Career Advancement in Higher Education: An Exploratory Study in Vietnam

    ERIC Educational Resources Information Center

    Nguyen, Thi Lan Huong

    2013-01-01

    Although the slow progress of female academics compared to their male colleagues and the challenges that female academic leaders have to face in taking leadership roles have been well-documented, very little is known about female academic leaders and managers' career advancement in developing countries like Vietnam. This paper reports on an…

  5. Gender Equity in Science and Engineering: Advancing Change in Higher Education. Routledge Studies in Management, Organizations and Society

    ERIC Educational Resources Information Center

    Bilimoria, Diana; Liang, Xiangfen

    2011-01-01

    Women faculty's participation in academic science and engineering is critical for future US global competitiveness, yet their underrepresentation particularly in senior positions remains a widespread problem. To overcome persistent institutional resistance and barriers to change, the "NSF ADVANCE" institutional transformation initiative,…

  6. The Effects of Using Concept Mapping for Improving Advanced Level Biology Students' Lower- and Higher-Order Cognitive Skills

    ERIC Educational Resources Information Center

    Bramwell-Lalor, Sharon; Rainford, Marcia

    2014-01-01

    This paper reports on teachers' use of concept mapping as an alternative assessment strategy in advanced level biology classes and its effects on students' cognitive skills on selected biology concepts. Using a mixed methods approach, the study employed a pre-test/post-test quasi-experimental design involving 156 students and 8 teachers from…

  7. Industrial innovations for tomorrow: Advances in industrial energy-efficiency technologies

    NASA Astrophysics Data System (ADS)

    1992-07-01

    To use slurries efficiently in a process, engineers must be able to determine the particle size distribution. A new particle size sensor is under development, based on ultrasonic spectroscopy and mathematical modeling. A field test prototype is being installed at a pilot facility for manufacturing pigments. The mathematical model has also been modified. The sensor is expected to enhance process control in the chemicals industry.

  8. Second Generation Advanced Reburning for High Efficiency NO(x) Control.

    SciTech Connect

    Zamansky, V.M.; Folsom, B.A.

    1997-10-27

    This project is designed to develop a family of novel NO{sub x} control technologies, called Second Generation Advanced Reburning which has the potential to achieve 90+% NO{sub x} control in coal fired boilers at a significantly lower cost than SCR. The eighth reporting period (July 1 - September 30, 1997) included experimental and final report preparation activities. Experiments on high-temperature reactions of sodium carbonate were completed at the University of Texas in Austin. This study revealed that sodium can affect NO{sub x} concentrations under both fuel-rich and fuel-lean conditions. The engineering design conducted during the previous reporting period was converted into retrofit hardware for the AR-Lean system and initial test results are presented and discussed. All information presented in this report is in summary form since a Draft Final project report was submitted to DOE FETC by July 31, 1997.

  9. Advances in multiplex PCR: balancing primer efficiencies and improving detection success

    PubMed Central

    Sint, Daniela; Raso, Lorna; Traugott, Michael

    2012-01-01

    1. Multiplex PCR is a valuable tool in many biological studies but it is a multifaceted procedure that has to be planned and optimised thoroughly to achieve robust and meaningful results. In particular, primer concentrations have to be adjusted to assure an even amplification of all targeted DNA fragments. Until now, total DNA extracts were used for balancing primer efficiencies; however, the applicability for comparisons between taxa or different multiple-copy genes was limited owing to the unknown number of template molecules present per total DNA. 2. Based on a multiplex system developed to track trophic interactions in high Alpine arthropods, we demonstrate a fast and easy way of generating standardised DNA templates. These were then used to balance the amplification success for the different targets and to subsequently determine the sensitivity of each primer pair in the multiplex PCR. 3. In the current multiplex assay, this approach led to an even amplification success for all seven targeted DNA fragments. Using this balanced multiplex PCR, methodological bias owing to variation in primer efficiency will be avoided when analysing field-derived samples. 4. The approach outlined here allows comparing multiplex PCR sensitivity, independent of the investigated species, genome size or the targeted genes. The application of standardised DNA templates not only makes it possible to optimise primer efficiency within a given multiplex PCR, but it also offers to adjust and/or to compare the sensitivity between different assays. Along with other factors that influence the success of multiplex reactions, and which we discuss here in relation to the presented detection system, the adoption of this approach will allow for direct comparison of multiplex PCR data between systems and studies, enhancing the utility of this assay type. PMID:23549328

  10. Systems Analyses of Advanced Brayton Cycles For High Efficiency Zero Emission Plants

    SciTech Connect

    A. D. Rao; J. Francuz; A. Verma; G. S. Samuelsen

    2006-10-30

    The ultimate goal of this program is to identify the power block cycle conditions and/or configurations which could increase the overall thermal efficiency of the Baseline IGCC by about 8% on a relative basis (i.e., 8% on a heat rate basis). This document presents the cycle conditions and/or the configurations for evaluation in an initial screening analysis. These cycle conditions and/or configurations for investigation in the screening analysis are identified by literature searches and brain storming sessions. The screening analysis in turn narrows down the number of promising cases for detailed analysis.

  11. Overview of Heat Addition and Efficiency Predictions for an Advanced Stirling Convertor

    NASA Technical Reports Server (NTRS)

    Wilson, Scott D.; Reid, Terry; Schifer, Nicholas; Briggs, Maxwell

    2011-01-01

    Past methods of predicting net heat input needed to be validated. Validation effort pursued with several paths including improving model inputs, using test hardware to provide validation data, and validating high fidelity models. Validation test hardware provided direct measurement of net heat input for comparison to predicted values. Predicted value of net heat input was 1.7 percent less than measured value and initial calculations of measurement uncertainty were 2.1 percent (under review). Lessons learned during validation effort were incorporated into convertor modeling approach which improved predictions of convertor efficiency.

  12. Higher Education for Economic Advancement and Engaged Citizenship: An Analysis of the U.S. Department of Education Discourse

    ERIC Educational Resources Information Center

    Suspitsyna, Tatiana

    2012-01-01

    The steadily growing body of literature on universities' contribution to democracy and civil society has repeatedly called for a re-examination of the nascent purposes of higher education and the nature of higher education's compact with society. Although more faculty and administrators explore ways to produce public scholarship, infuse their…

  13. Quantum efficiency of PAG decomposition in different polymer matrices at advanced lithographic wavelengths

    NASA Astrophysics Data System (ADS)

    Fedynyshyn, Theodore H.; Sinta, Roger F.; Mowers, William A.; Cabral, Alberto

    2003-06-01

    The Dill ABC parameters for optical resists are typically determined by measuring the change in the intensity of transmitted light at the wavelength of interest as a function of incident energy. The effectiveness of the experiment rests with the fact that the resist optical properties change with exposure and that the optical properties are directly related to the concentration of PAG compound. These conditions are not typically satisfied in CA resists and thus C is unobtainable by this method. FT-IR spectroscopy can directly measure changes in the photoactive species by isolating and measuring absorbance peaks unique to the photoactive species. We employed the ProABC software, specially modified to allow FT-IR absorbance input, to extract ABS parameters through a best fit of the lithography model to experimental data. The quantum efficiency of PAG decomposition at 157-, 193-, and 248-nm was determined for four diazomethane type PAGs in four different polymer matrices. It was found that both the Dill C parameter and the quantum efficiency for all PAGs increased as wavelength decreased, but that the magnitude of the increase was strongly dependent on the polymer matrix.

  14. Funding for Higher Education in Asia and the Pacific. Strategies To Increase Cost Efficiency and Attract Additional Financial Support.

    ERIC Educational Resources Information Center

    Harman, Grant, Ed.; Selim, M., Ed.

    This book presents articles that document the serious funding problems faced by higher education institutions and systems in the Asian and Pacific region, and explores possible strategies to address these problems. It presents an overview of the financial situation faced by higher education in the region, and then discusses two main strategies…

  15. Second generation advanced reburning for high efficiency NO(x) control. Progress report, 1196

    SciTech Connect

    Zamansky, V.M.; Maly, P.M.

    1996-10-01

    This project is designed to develop a family of novel NO{sub x} control technologies, called Second Generation Advanced Reburning (SGAR), which has the potential to achieve 90+% NO{sub x} control in coal fired boilers at a significantly lower cost than Selective Catalytic Reduction. Phase I consists of six tasks: Task 1.1 Project Coordination and Reporting/Deliverables; Task 1.2 Kinetics of Na{sub 2}CO{sub 3} Reactions with Flue Gas Components; Task 1.3 O.l x lO{sup 6}Btu/hr Optimization Studies; Task 1.4 1.0 x 10{sup 6} Btu/hr Process Development Tests; Task 1.5 Mechanism Development and Modeling; and Task 1. 6 Design Methodology and Application. The fourth reporting period (July 1 - September 30, 1996) included both experimental and modeling activities. The bench scale CTT experiments (Task 1.3) were completed. The 1 MMBtu/hr Boiler Simulator Facility (BSF) was prepared for the test program and experiments were conducted using natural gas (NG) as main and reburing fuels (Task 1.4). A few preliminary tests were also performed with coal firing. The results have been reduced and are reported. Initial experimental data were obtained on reactions of sodium promoters (Task 1.2) at the University of Texas in Austin (UT). The kinetic model was extended to include reactions of sulfur and sodium (Task 1.5).

  16. Joint System Prognostics For Increased Efficiency And Risk Mitigation In Advanced Nuclear Reactor Instrumentation and Control

    SciTech Connect

    Donald D. Dudenhoeffer; Tuan Q. Tran; Ronald L. Boring; Bruce P. Hallbert

    2006-08-01

    The science of prognostics is analogous to a doctor who, based on a set of symptoms and patient tests, assesses a probable cause, the risk to the patient, and a course of action for recovery. While traditional prognostics research has focused on the aspect of hydraulic and mechanical systems and associated failures, this project will take a joint view in focusing not only on the digital I&C aspect of reliability and risk, but also on the risks associated with the human element. Model development will not only include an approximation of the control system physical degradation but also on human performance degradation. Thus the goal of the prognostic system is to evaluate control room operation; to identify and potentially take action when performance degradation reduces plant efficiency, reliability or safety.

  17. Michrohole Arrays Drilled with Advanced Abrasive Slurry Jet Technology to Efficiently Exploit Enhanced Geothermal Systems

    SciTech Connect

    Oglesby, Kenneth; Finsterle, Stefan; Zhang, Yingqi; Pan, Lehua; Dobson, Parick; Mohan, Ram; Shoham, Ovadia; Felber, Betty; Rychel, Dwight

    2014-03-12

    This project had two major areas of research for Engineered/ Enhanced Geothermal System (EGS) development - 1) study the potential benefits from using microholes (i.e., bores with diameters less than 10.16 centimeters/ 4 inches) and 2) study FLASH ASJ to drill/ install those microbores between a well and a fracture system. This included the methods and benefits of drilling vertical microholes for exploring the EGS reservoir and for installing multiple (forming an array of) laterals/ directional microholes for creating the in-reservoir heat exchange flow paths. Significant benefit was found in utilizing small microbore sized connecting bores for EGS efficiency and project life. FLASH ASJ was deemed too complicated to optimally work in such deep reservoirs at this time.

  18. Advances in the Development of Gene-Targeting Vectors to Increase the Efficiency of Genetic Modification.

    PubMed

    Saito, Shinta; Adachi, Noritaka

    2016-01-01

    Gene targeting via homologous recombination, albeit highly inefficient in human cells, is considered a powerful tool for analyzing gene functions. Despite recent progress in the application of artificial nucleases for genome editing, safety issues remain a concern, particularly when genetic modification is used for therapeutic purposes. Therefore, the development of gene-targeting vectors is necessary for safe and sophisticated genetic modification. In this paper, we describe the effect of vector structure on random integration, which is a major obstacle in efficient gene targeting. In addition, we focus on the features of exon-trapping-type gene-targeting vectors, and discuss a novel strategy for negative selection to enhance gene targeting in human cells.

  19. Introducing the Intellectual Capital Interplay Model: Advancing Knowledge Frameworks in the Not-for-Profit Environment of Higher Education

    ERIC Educational Resources Information Center

    Helm-Stevens, Roxanne; Brown, Kneeland C.; Russell, Julia K.

    2011-01-01

    Knowledge management has the potential to develop strategic advantage and enhance the performance of an organization in terms of productivity and business process efficiency. For this reason, organizations are contributing significant resources to knowledge management; investing in information location and implementing knowledge management…

  20. Japanese Solutions to the Equity and Efficiency Dilemma? Secondary Schools, Inequity and the Arrival of "Universal" Higher Education

    ERIC Educational Resources Information Center

    Kariya, Takehiko

    2011-01-01

    Any moves towards substantive equality in education must negotiate the contradictions between equality and efficiency. Equality of education comes about through both the widening of opportunity and the maintenance of educational quality, but in the context of limited resources, educational policy rarely serves both ends simultaneously. Regardless…

  1. [Research advances in the calculating method of nitrogen use efficiency (NUE) in cultivated lands].

    PubMed

    Yang, Xian-long; Tong, Yan-an; Lu, Yong-li; Ma, Hai-yang

    2015-07-01

    Nitrogen use efficiency (NUE) has received worldwide concern in the sphere of agronomic science and environmental science, and it is fundamentally important for evaluating N utilization status and optimizing N fertilization management in cultivated lands. In recent years, in consideration of low values and great variations of NUE in China' s cultivated lands, some scholars have discussed on the traditional concept and calculating method of NUE, and also have proposed some substituted NUE calculating methods. In this paper, we summarized some disadvantages of both conventional concept and calculating method of NUE, i.e. the subtraction method and the 15N labeling method. Furthermore, we particularly introduced several substituted NUE calculation methods and discussed research directions in the future. In summary, we strongly suggested the establishment of a comprehensive evaluation index system of N utilization in good accordance with the current agricultural production status in China, based on a correct understanding of the dialectical relationships among N application rate, crop yield, N utilization and N loss.

  2. Proposing advancement criteria for efficient DMPK triage of new chemical entities.

    PubMed

    Kulkarni, Ashutosh; Riggs, Jennifer; Phan, Cindy; Bai, April; Calabrese, Andrew; Shi, Tao; Moghaddam, Mehran F

    2014-02-01

    With the goal of refining our discovery DMPK workflow, we conducted a retrospective analysis on internal Celgene compounds by calculating the physicochemical properties and gathering data from several assays including solubility, rat and human liver S9 stability, Caco-2 permeability, and rat intravenous (iv.) and oral pharmacokinetics. Our analysis identified plasma clearance to be most statistically relevant for prediction of oral exposure. In rat, compounds with rat S9 stability of ≥70% at 60 min and a plasma clearance of ≤43 ml/min/kg had the greatest chance of achieving oral exposures above 3 µM.h. Compounds with the dual advantage of plasma clearance ≤43 ml/min/kg and Caco-2 permeability ≥8 × 10(-6) cm/s or efflux ratio ≤8 were highly likely to achieve those oral exposures. Implementation of these criteria leads to a significant increase in efficiency, good pharmacokinetic properties, cost savings and a reduction in the use of animals.

  3. Micropollutant degradation, bacterial inactivation and regrowth risk in wastewater effluents: Influence of the secondary (pre)treatment on the efficiency of Advanced Oxidation Processes.

    PubMed

    Giannakis, Stefanos; Voumard, Margaux; Grandjean, Dominique; Magnet, Anoys; De Alencastro, Luiz Felippe; Pulgarin, César

    2016-10-01

    In this work, disinfection by 5 Advanced Oxidation Processes was preceded by 3 different secondary treatment systems present in the wastewater treatment plant of Vidy, Lausanne (Switzerland). 5 AOPs after two biological treatment methods (conventional activated sludge and moving bed bioreactor) and a physiochemical process (coagulation-flocculation) were tested in laboratory scale. The dependence among AOPs efficiency and secondary (pre)treatment was estimated by following the bacterial concentration i) before secondary treatment, ii) after the different secondary treatment methods and iii) after the various AOPs. Disinfection and post-treatment bacterial regrowth were the evaluation indicators. The order of efficiency was Moving Bed Bioreactor > Activated Sludge > Coagulation-Flocculation > Primary Treatment. As far as the different AOPs are concerned, the disinfection kinetics were: UVC/H2O2 > UVC and solar photo-Fenton > Fenton or solar light. The contextualization and parallel study of microorganisms with the micropollutants of the effluents revealed that higher exposure times were necessary for complete degradation compared to microorganisms for the UV-based processes and inversed for the Fenton-related ones. Nevertheless, in the Fenton-related systems, the nominal 80% removal of micropollutants deriving from the Swiss legislation, often took place before the elimination of bacterial regrowth risk.

  4. Results of design studies and wind tunnel tests of an advanced high lift system for an Energy Efficient Transport

    NASA Technical Reports Server (NTRS)

    Oliver, W. R.

    1980-01-01

    The development of an advanced technology high lift system for an energy efficient transport incorporating a high aspect ratio supercritical wing is described. This development is based on the results of trade studies to select the high lift system, analysis techniques utilized to design the high lift system, and results of a wind tunnel test program. The program included the first experimental low speed, high Reynolds number wind tunnel test for this class of aircraft. The experimental results include the effects on low speed aerodynamic characteristics of various leading and trailing edge devices, nacelles and pylons, aileron, spoilers, and Mach and Reynolds numbers. Results are discussed and compared with the experimental data and the various aerodynamic characteristics are estimated.

  5. Optimization of Process Parameters for High Efficiency Laser Forming of Advanced High Strength Steels within Metallurgical Constraints

    NASA Astrophysics Data System (ADS)

    Sheikholeslami, Ghazal; Griffiths, Jonathan; Dearden, Geoff; Edwardson, Stuart P.

    Laser forming (LF) has been shown to be a viable alternative to form automotive grade advanced high strength steels (AHSS). Due to their high strength, heat sensitivity and low conventional formability show early fractures, larger springback, batch-to-batch inconsistency and high tool wear. In this paper, optimisation of the LF process parameters has been conducted to further understand the impact of a surface heat treatment on DP1000. A FE numerical simulation has been developed to analyse the dynamic thermo-mechanical effects. This has been verified against empirical data. The goal of the optimisation has been to develop a usable process window for the LF of AHSS within strict metallurgical constraints. Results indicate it is possible to LF this material, however a complex relationship has been found between the generation and maintenance of hardness values in the heated zone. A laser surface hardening effect has been observed that could be beneficial to the efficiency of the process.

  6. Development of an advanced high efficiency coal combustor for boiler retrofit. Task 1, Cold flow burner development: Final report

    SciTech Connect

    LaFlesh, R.C.; Rini, M.J.; McGowan, J.G.

    1989-10-01

    The overall objective of this program is to develop a high efficiency advanced coal combustor (HEACC) for coal-based fuels capable of being retrofitted to industrial boilers originally designed for firing natural gas, distillate, and/or residual oil. The HEACC system is to be capable of firing microfine coal water fuel (MCWF), MCWF with alkali sorbent (for SO{sub 2} reduction), and dry microfine coal. Design priorities for the system are that it be simple to operate and will offer significant reductions in NO{sub x}, SO{sub x}, and particulate emissions as compared with current coal fired combustor technology. The specific objective of this report is to document the work carried out under Task 1.0 of this contract, ``Cold Flow Burner Development``. As are detailed in the report, key elements of this work included primary air swirler development, burner register geometry design, cold flow burner model testing, and development of burner scale up criteria.

  7. Lightweighting Automotive Materials for Increased Fuel Efficiency and Delivering Advanced Modeling and Simulation Capabilities to U.S. Manufacturers

    SciTech Connect

    Hale, Steve

    2013-09-11

    Abstract The National Center for Manufacturing Sciences (NCMS) worked with the U.S. Department of Energy (DOE), National Energy Technology Laboratory (NETL), to bring together research and development (R&D) collaborations to develop and accelerate the knowledgebase and infrastructure for lightweighting materials and manufacturing processes for their use in structural and applications in the automotive sector. The purpose/importance of this DOE program: • 2016 CAFÉ standards. • Automotive industry technology that shall adopt the insertion of lightweighting material concepts towards manufacturing of production vehicles. • Development and manufacture of advanced research tools for modeling and simulation (M&S) applications to reduce manufacturing and material costs. • U.S. competitiveness that will help drive the development and manufacture of the next generation of materials. NCMS established a focused portfolio of applied R&D projects utilizing lightweighting materials for manufacture into automotive structures and components. Areas that were targeted in this program: • Functionality of new lightweighting materials to meet present safety requirements. • Manufacturability using new lightweighting materials. • Cost reduction for the development and use of new lightweighting materials. The automotive industry’s future continuously evolves through innovation, and lightweight materials are key in achieving a new era of lighter, more efficient vehicles. Lightweight materials are among the technical advances needed to achieve fuel/energy efficiency and reduce carbon dioxide (CO2) emissions: • Establish design criteria methodology to identify the best materials for lightweighting. • Employ state-of-the-art design tools for optimum material development for their specific applications. • Match new manufacturing technology to production volume. • Address new process variability with new production-ready processes.

  8. Systems Analyses of Advanced Brayton Cycles For High Efficiency Zero Emission Plants

    SciTech Connect

    A. D. Rao; J. Francuz; H. Liao; A. Verma; G. S. Samuelsen

    2006-11-01

    Table 1 shows that the systems efficiency, coal (HHV) to power, is 35%. Table 2 summarizes the auxiliary power consumption within the plant. Thermoflex was used to simulate the power block and Aspen Plus the balance of plant. The overall block flow diagram is presented in Figure A1.3-1 and the key unit process flow diagrams are shown in subsequent figures. Stream data are given in Table A1.3-1. Equipment function specifications are provided in Tables A1.3-2 through 17. The overall plant scheme consists of a cryogenic air separation unit supplying 95% purity O{sub 2} to GE type high pressure (HP) total quench gasifiers. The raw gas after scrubbing is treated in a sour shift unit to react the CO with H{sub 2}O to form H{sub 2} and CO{sub 2}. The gas is further treated to remove Hg in a sulfided activated carbon bed. The syngas is desulfurized and decarbonized in a Selexol acid gas removal unit and the decarbonized syngas after humidification and preheat is fired in GE 7H type steam cooled gas turbines. Intermediate pressure (IP) N{sub 2} from the ASU is also supplied to the combustors of the gas turbines as additional diluent for NOx control. A portion of the air required by the ASU is extracted from the gas turbines. The plant consists of the following major process units: (1) Air Separation Unit (ASU); (2) Gasification Unit; (3) CO Shift/Low Temperature Gas Cooling (LTGC) Unit; (4) Acid Gas Removal Unit (AGR) Unit; (5) Fuel Gas Humidification Unit; (6) Carbon Dioxide Compression/Dehydration Unit; (7) Claus Sulfur Recovery/Tail Gas Treating Unit (SRU/TGTU); and (8) Power Block.

  9. Automatically high accurate and efficient photomask defects management solution for advanced lithography manufacture

    NASA Astrophysics Data System (ADS)

    Zhu, Jun; Chen, Lijun; Ma, Lantao; Li, Dejian; Jiang, Wei; Pan, Lihong; Shen, Huiting; Jia, Hongmin; Hsiang, Chingyun; Cheng, Guojie; Ling, Li; Chen, Shijie; Wang, Jun; Liao, Wenkui; Zhang, Gary

    2014-04-01

    Defect review is a time consuming job. Human error makes result inconsistent. The defects located on don't care area would not hurt the yield and no need to review them such as defects on dark area. However, critical area defects can impact yield dramatically and need more attention to review them such as defects on clear area. With decrease in integrated circuit dimensions, mask defects are always thousands detected during inspection even more. Traditional manual or simple classification approaches are unable to meet efficient and accuracy requirement. This paper focuses on automatic defect management and classification solution using image output of Lasertec inspection equipment and Anchor pattern centric image process technology. The number of mask defect found during an inspection is always in the range of thousands or even more. This system can handle large number defects with quick and accurate defect classification result. Our experiment includes Die to Die and Single Die modes. The classification accuracy can reach 87.4% and 93.3%. No critical or printable defects are missing in our test cases. The missing classification defects are 0.25% and 0.24% in Die to Die mode and Single Die mode. This kind of missing rate is encouraging and acceptable to apply on production line. The result can be output and reloaded back to inspection machine to have further review. This step helps users to validate some unsure defects with clear and magnification images when captured images can't provide enough information to make judgment. This system effectively reduces expensive inline defect review time. As a fully inline automated defect management solution, the system could be compatible with current inspection approach and integrated with optical simulation even scoring function and guide wafer level defect inspection.

  10. The State College Role in Advancing Environmental Sustainability: Policies, Programs and Practices. Policy Matters: A Higher Education Policy Brief

    ERIC Educational Resources Information Center

    Harnisch, Thomas

    2008-01-01

    The American higher education enterprise has the capacity and fortitude to confront many of the country's most pressing energy and environmental challenges. Many institutions and state college systems are using campus resources to carry out grassroots environmental initiatives. These activities have yielded important environmental, educational,…

  11. A Transactional Perspective on Teaching and Learning: A Framework for Adult and Higher Education. Advances in Learning and Instruction Series.

    ERIC Educational Resources Information Center

    Garrison, D. Randy; Archer, Walter

    Focusing on teaching and learning (the learning process rather than selection of learning content), this book provides a comprehensive perspective on the process of adult and higher education. Part 1 explores the transactional relationship between the personal reflective world of the learner and the collaborative shared world of the educational…

  12. How to increase treatment effectiveness and efficiency in psychiatry: creative psychopharmacotherapy - part 1: definition, fundamental principles and higher effectiveness polypharmacy.

    PubMed

    Jakovljević, Miro

    2013-09-01

    Psychopharmacotherapy is a fascinating field that can be understood in many different ways. It is both a science and an art of communication with a heavily subjective dimension. The advent of a significant number of the effective and well tolerated mental health medicines during and after 1990s decade of the brain has increased our possibilities to treat major mental disorders in more successful ways with much better treatment outcome including full recovery. However, there is a huge gap between our possibilities for achieving high treatment effectiveness and not satisfying results in day-to-day clinical practice. Creative approach to psychopharmacotherapy could advance everyday clinical practice and bridge the gap. Creative psychopharmacotherapy is a concept that incorporates creativity as its fundamental tool. Creativity involves the intention and ability to transcend limiting traditional ideas, rules, patterns and relationships and to create meaningful new ideas, interpretations, contexts and methods in clinical psychopharmacology.

  13. Funding System of Full-Time Higher Education and Technical Efficiency: Case of the University of Ljubljana

    ERIC Educational Resources Information Center

    Tajnikar, Maks; Debevec, Jasmina

    2008-01-01

    The present paper tackles the issue of the higher education funding system in Slovenia. Its main attribute is that institutions are classified into study groups according to their fields of education, and funds granted by the state are based on their weights or study group factors (SGF). Analysis conducted using data envelopment analysis tested…

  14. High-efficiency in situ resonant inelastic x-ray scattering (iRIXS) endstation at the Advanced Light Source

    NASA Astrophysics Data System (ADS)

    Qiao, Ruimin; Li, Qinghao; Zhuo, Zengqing; Sallis, Shawn; Fuchs, Oliver; Blum, Monika; Weinhardt, Lothar; Heske, Clemens; Pepper, John; Jones, Michael; Brown, Adam; Spucces, Adrian; Chow, Ken; Smith, Brian; Glans, Per-Anders; Chen, Yanxue; Yan, Shishen; Pan, Feng; Piper, Louis F. J.; Denlinger, Jonathan; Guo, Jinghua; Hussain, Zahid; Chuang, Yi-De; Yang, Wanli

    2017-03-01

    An endstation with two high-efficiency soft x-ray spectrographs was developed at Beamline 8.0.1 of the Advanced Light Source, Lawrence Berkeley National Laboratory. The endstation is capable of performing soft x-ray absorption spectroscopy, emission spectroscopy, and, in particular, resonant inelastic soft x-ray scattering (RIXS). Two slit-less variable line-spacing grating spectrographs are installed at different detection geometries. The endstation covers the photon energy range from 80 to 1500 eV. For studying transition-metal oxides, the large detection energy window allows a simultaneous collection of x-ray emission spectra with energies ranging from the O K-edge to the Ni L-edge without moving any mechanical components. The record-high efficiency enables the recording of comprehensive two-dimensional RIXS maps with good statistics within a short acquisition time. By virtue of the large energy window and high throughput of the spectrographs, partial fluorescence yield and inverse partial fluorescence yield signals could be obtained for all transition metal L-edges including Mn. Moreover, the different geometries of these two spectrographs (parallel and perpendicular to the horizontal polarization of the beamline) provide contrasts in RIXS features with two different momentum transfers.

  15. Advancing Efficient All-Electron Electronic Structure Methods Based on Numeric Atom-Centered Orbitals for Energy Related Materials

    NASA Astrophysics Data System (ADS)

    Blum, Volker

    This talk describes recent advances of a general, efficient, accurate all-electron electronic theory approach based on numeric atom-centered orbitals; emphasis is placed on developments related to materials for energy conversion and their discovery. For total energies and electron band structures, we show that the overall accuracy is on par with the best benchmark quality codes for materials, but scalable to large system sizes (1,000s of atoms) and amenable to both periodic and non-periodic simulations. A recent localized resolution-of-identity approach for the Coulomb operator enables O (N) hybrid functional based descriptions of the electronic structure of non-periodic and periodic systems, shown for supercell sizes up to 1,000 atoms; the same approach yields accurate results for many-body perturbation theory as well. For molecular systems, we also show how many-body perturbation theory for charged and neutral quasiparticle excitation energies can be efficiently yet accurately applied using basis sets of computationally manageable size. Finally, the talk highlights applications to the electronic structure of hybrid organic-inorganic perovskite materials, as well as to graphene-based substrates for possible future transition metal compound based electrocatalyst materials. All methods described here are part of the FHI-aims code. VB gratefully acknowledges contributions by numerous collaborators at Duke University, Fritz Haber Institute Berlin, TU Munich, USTC Hefei, Aalto University, and many others around the globe.

  16. Displacement of a native by an alien bumblebee: lower pollinator efficiency overcome by overwhelmingly higher visitation frequency.

    PubMed

    Madjidian, Josefin A; Morales, Carolina L; Smith, Henrik G

    2008-07-01

    Biological invasions might constitute a major threat to mutualisms. Introduced pollinators might competitively displace their native counterparts, which in turn affects the pollination of native plants, if native and alien visitors differ in pollinator effectiveness. Since its invasion in 1994 into south-west Argentina, the introduced European bumblebee Bombus ruderatus has continuously increased in abundance, along with a simultaneous decrease in the abundance of the native Bombus dahlbomii. The latter is the only native bumblebee species of the temperate forests of southern South America, and the main pollinator of the endemic herb Alstroemeria aurea. In order to evaluate the impact of the ongoing displacement of the native by the alien bumblebee, we compared the pollinator effectiveness (i.e., the combination of pollinator efficiency per visit and visitation frequency) between both bumblebee species, as well as related pollinator traits that might account for potential differences in pollinator efficiency. Native Bombus dahlbomii, which has a larger body and spent more time per flower, was the more efficient pollinator compared to Bombus ruderatus, both in terms of quantity and quality of pollen deposited per visit. However, Bombus ruderatus was a much more frequent flower visitor than Bombus dahlbomii. As a consequence, Bombus ruderatus is nowadays a more effective pollinator of A. aurea than its native congener. Despite the lack of evidence of an increase in seed set at the population level, comparisons with historical records of Bombus dahlbomii abundances prior to Bombus ruderatus' invasion suggest that the overall pollination intensity of A. aurea might in fact have risen as a consequence of this invasion. Field experiments like these, that incorporate the natural variation in abundance of native and alien species, are powerful means to demonstrate that the consequences of invasions are more complex than previous manipulated and controlled experiments have

  17. AN EFFICIENT HIGHER-ORDER FAST MULTIPOLE BOUNDARY ELEMENT SOLUTION FOR POISSON-BOLTZMANN BASED MOLECULAR ELECTROSTATICS

    PubMed Central

    Bajaj, Chandrajit; Chen, Shun-Chuan; Rand, Alexander

    2011-01-01

    In order to compute polarization energy of biomolecules, we describe a boundary element approach to solving the linearized Poisson-Boltzmann equation. Our approach combines several important features including the derivative boundary formulation of the problem and a smooth approximation of the molecular surface based on the algebraic spline molecular surface. State of the art software for numerical linear algebra and the kernel independent fast multipole method is used for both simplicity and efficiency of our implementation. We perform a variety of computational experiments, testing our method on a number of actual proteins involved in molecular docking and demonstrating the effectiveness of our solver for computing molecular polarization energy. PMID:21660123

  18. ADVANCED BIOMASS REBURNING FOR HIGH EFFICIENCY NOx CONTROL AND BIOMASS REBURNING - MODELING/ENGINEERING STUDIES JOINT FINAL REPORT

    SciTech Connect

    Vladimir M. Zamansky; Mark S. Sheldon; Vitali V. Lissianski; Peter M. Maly; David K. Moyeda; Antonio Marquez; W. Randall Seeker

    2000-10-01

    This report presents results of studies under a Phase II SBIR program funded by the U. S. Department of Agriculture, and a closely coordinated project sponsored by the DOE National Energy Technology Laboratory (NETL, formerly FETC). The overall Phase II objective of the SBIR project is to experimentally optimize the biomass reburning technologies and conduct engineering design studies needed for process demonstration at full scale. The DOE project addresses supporting issues for the process design including modeling activities, economic studies of biomass handling, and experimental evaluation of slagging and fouling. The performance of biomass has been examined in a 300 kW (1 x 10{sup 6} Btu/hr) Boiler Simulator Facility under different experimental conditions. Fuels under investigation include furniture waste, willow wood and walnut shells. Tests showed that furniture pellets and walnut shells provided similar NO{sub x} control as that of natural gas in basic reburning at low heat inputs. Maximum NO{sub x} reduction achieved with walnut shell and furniture pellets was 65% and 58% respectively. Willow wood provided a maximum NO{sub x} reduction of 50% and was no better than natural gas at any condition tested. The efficiency of biomass increases when N-agent is injected into reburning and/or burnout zones, or along with OFA (Advanced Reburning). Co-injection of Na{sub 2}CO{sub 3} with N-agent further increases efficiency of NO{sub x} reduction. Maximum NO{sub x} reduction achieved with furniture pellets and willow wood in Advanced Reburning was 83% and 78% respectively. All combustion experiments of the Phase II project have been completed. All objectives of the experimental tasks were successfully met. The kinetic model of biomass reburning has been developed. Model agrees with experimental data for a wide range of initial conditions and thus correctly represents main features of the reburning process. Modeling suggests that the most important factors that provide

  19. Advances in the phylogenesis of Agaricales and its higher ranks and strategies for establishing phylogenetic hypotheses§

    PubMed Central

    Zhao, Rui-lin; Desjardin, Dennis E.; Soytong, Kasem; Hyde, Kevin D.

    2008-01-01

    We present an overview of previous research results on the molecular phylogenetic analyses in Agaricales and its higher ranks (Agaricomycetes/Agaricomycotina/Basidiomycota) along with the most recent treatments of taxonomic systems in these taxa. Establishing phylogenetic hypotheses using DNA sequences, from which an understanding of the natural evolutionary relationships amongst clades may be derived, requires a robust dataset. It has been recognized that single-gene phylogenies may not truly represent organismal phylogenies, but the concordant phylogenetic genealogies from multiple-gene datasets can resolve this problem. The genes commonly used in mushroom phylogenetic research are summarized. PMID:18837104

  20. Development of advanced drilling, completion, and stimulation systems for minimum formation damage and improved efficiency: A program overview

    SciTech Connect

    Layne, A.W.; Yost, A.B. II

    1994-07-01

    The Department of Energy`s (DOE) Natural Gas Resource and Extraction Program consists of industry/government co-sponsored research, development, and demonstration (RD&D) projects, which focus on gas recovery from both conventional and nonconventional resources. The Drilling, Completion, and Stimulation (DCS) Project focuses on advanced, non-damaging technology systems and equipment for improving gas recovery from conventional and nonconventional reservoirs. As operators move from development of current day economically attractive gas-field development to the lower permeability geologic regions of domestic onshore plays, increasing the emphasis on minimum formation damage DCS will permit economic development of gas reserves. The objective of the Project is to develop and demonstrate cost-effective, advanced technology to accelerate widespread use and acceptance of minimum formation damage DCS systems. The goal of this product development effort is to reduce costs and improve the overall efficiency of vertical, directional, and horizontally drilled wells in gas formations throughout the US. The current focus of the Project is on the development of underbalanced drilling technology and minimum formation damage stimulation technology concurrently with the appropriate completion hardware to improve the economics of domestic natural gas field development. Ongoing drilling technology projects to be discussed include development of an electromagnetic measurement while drilling system for directional and horizontal drilling in underbalanced drilling applications and the development of a steerable air percussion drilling system for hard formation drilling and improved penetration rates. Ongoing stimulation technology projects to be discussed include introduction of carbon dioxide/sand fracturing technology for minimal formation damage.

  1. Pichia pastoris secretes recombinant proteins less efficiently than Chinese hamster ovary cells but allows higher space-time yields for less complex proteins.

    PubMed

    Maccani, Andreas; Landes, Nils; Stadlmayr, Gerhard; Maresch, Daniel; Leitner, Christian; Maurer, Michael; Gasser, Brigitte; Ernst, Wolfgang; Kunert, Renate; Mattanovich, Diethard

    2014-04-01

    Chinese hamster ovary (CHO) cells are currently the workhorse of the biopharmaceutical industry. However, yeasts such as Pichia pastoris are about to enter this field. To compare their capability for recombinant protein secretion, P. pastoris strains and CHO cell lines producing human serum albumin (HSA) and the 3D6 single chain Fv-Fc anti-HIV-1 antibody (3D6scFv-Fc) were cultivated in comparable fed batch processes. In P. pastoris, the mean biomass-specific secretion rate (qp ) was 40-fold lower for 3D6scFv-Fc compared to HSA. On the contrary, qp was similar for both proteins in CHO cells. When comparing both organisms, the mean qp of the CHO cell lines was 1011-fold higher for 3D6scFv-Fc and 26-fold higher for HSA. Due to the low qp of the 3D6scFv-Fc producing strain, the space-time yield (STY) was 9.6-fold lower for P. pastoris. In contrast, the STY of the HSA producer was 9.2-fold higher compared to CHO cells because of the shorter process time and higher biomass density. The results indicate that the protein secretion machinery of P. pastoris is much less efficient and the secretion rate strongly depends on the complexity of the recombinant protein. However, process efficiency of the yeast system allows higher STYs for less complex proteins.

  2. Advanced Cd(II) complexes as high efficiency co-sensitizers for enhanced dye-sensitized solar cell performance.

    PubMed

    Gao, Song; Fan, Rui Qing; Wang, Xin Ming; Qiang, Liang Sheng; Wei, Li Guo; Wang, Ping; Yang, Yu Lin; Wang, Yu Lei

    2015-11-07

    This work reports on two new complexes with the general formula [Cd3(IBA)3(Cl)2(HCOO)(H2O)]n (1) and {[Cd1.5(IBA)3(H2O)6]·3.5H2O}n (2), which can be synthesized by the reaction of Cd(II) with rigid linear ligand 4-HIBA containing imidazolyl and carboxylate functional groups [4-HIBA = 4-(1H-imidazol-1-yl)benzoic acid]. Single-crystal X-ray diffraction analyses indicate that complex 1 is a 2D "wave-like" layer structure constructed from trinuclear units and complex 2 is just a mononuclear structure. Surprisingly, both complexes 1 and 2 appear as a 3D supramolecular network via intermolecular hydrogen bonding interactions. What's more, due to their strong UV-visible absorption, 1 and 2 can be employed as co-sensitizers in combination with N719 to enhance dye-sensitized solar cell (DSSC) performance. Both of them could overcome the deficiency of the ruthenium complex N719 absorption in the region of ultraviolet and blue-violet, and the charge collection efficiency is also improved when 1 and 2 are used as co-sensitizers, which are all in favor of enhancing the performance. The DSSC devices using co-sensitizers of 1/N719 and 2/N719 show an overall conversion efficiency of 8.27% and 7.73% with a short circuit current density of 17.48 mA cm(-2) and 17.39 mA cm(-2), and an open circuit voltage of 0.75 V and 0.74 V, respectively. The overall conversion efficiency is 27.23% and 18.92% higher than that of a device solely sensitized by N719 (6.50%). Consequently, the prepared complexes are high efficiency co-sensitizers for enhancing the performance of N719 sensitized solar cells.

  3. Effect of advanced technology and fuel efficient engine on a supersonic-cruise executive jet with a small cabin

    NASA Technical Reports Server (NTRS)

    Beissner, F. L., Jr.; Lovell, W. A.; Robins, A. W.; Swanson, E. E.

    1983-01-01

    An analytical study of a supersonic-cruise, executive, jet aircraft indicated the effects of using advanced technology. The twin-engine, arrow-wing vehicle was configured with a cabin of minimum practical size to hold one pilot, eight passengers, and their baggage. The primary differences between this configuration that of a previous report were the reduction in cabin size and the use of engines that are more fuel-efficient. Both conceptual vehicles are capable of forming the same mission. The current vehicle has a range of 3,350 nautical miles at Mach 2.3 cruise and 2,700 nautical miles at Mach 0.9. The concept description includes configuration definition, aerodynamic and propulsion-system characteristics, and mass properties. Performance analyses are documented for intercontinental and transcontinental flight profiles. In the latter case, a reduction in sonic-boom overpressure from 1.3 to 1.0 pounds per square foot was achieved by varying the flight profile slightly from that for optimum performance.

  4. Computer architecture for efficient algorithmic executions in real-time systems: New technology for avionics systems and advanced space vehicles

    NASA Technical Reports Server (NTRS)

    Carroll, Chester C.; Youngblood, John N.; Saha, Aindam

    1987-01-01

    Improvements and advances in the development of computer architecture now provide innovative technology for the recasting of traditional sequential solutions into high-performance, low-cost, parallel system to increase system performance. Research conducted in development of specialized computer architecture for the algorithmic execution of an avionics system, guidance and control problem in real time is described. A comprehensive treatment of both the hardware and software structures of a customized computer which performs real-time computation of guidance commands with updated estimates of target motion and time-to-go is presented. An optimal, real-time allocation algorithm was developed which maps the algorithmic tasks onto the processing elements. This allocation is based on the critical path analysis. The final stage is the design and development of the hardware structures suitable for the efficient execution of the allocated task graph. The processing element is designed for rapid execution of the allocated tasks. Fault tolerance is a key feature of the overall architecture. Parallel numerical integration techniques, tasks definitions, and allocation algorithms are discussed. The parallel implementation is analytically verified and the experimental results are presented. The design of the data-driven computer architecture, customized for the execution of the particular algorithm, is discussed.

  5. Baffled membrane bioreactor (BMBR) for advanced wastewater treatment: easy modification of existing MBRs for efficient nutrient removal.

    PubMed

    Kimura, K; Watanabe, Y

    2005-01-01

    In this study, a novel membrane bioreactor (MBR) in which nitrification and denitrification simultaneously proceed in a single reaction chamber is proposed for advanced municipal wastewater treatment. Anoxic/aerobic environments are alternatively created in the proposed MBR by inserting baffles inside the membrane chamber. The performance of the proposed baffled membrane bioreactor (BMBR) was examined at an existing municipal wastewater treatment facility based on long-term operation. Although the procedure was simple, insertion of the baffles actually created the alternative anoxic/aerobic environments in the chamber at a constant interval and showed a great improvement in the nutrient removal. The insertion did not cause any adverse effect on membrane permeability. In this study, almost complete elimination of NH4+-N was observed while around 8 mg/L of NO(3-)-N was detected in the treated water. The modification proposed in this study can immediately be applied to most existing MBRs and is highly recommended for more efficient wastewater treatment.

  6. Second generation advanced reburning for high efficiency NO{sub x} control. Quaterly progress report No. 1, October 1--December 31, 1995

    SciTech Connect

    Zamansky, V.M.; Maly, P.M.

    1996-01-22

    Title 1 of the Clean Air Act Amendment (CAAA) of 1990 requires NO{sub x} controls in ozone non- attainment areas. The initial Title 1 regulations, implemented over the last few years, required Reasonably Available Control Technologies (RACT). In most areas, the NO{sub x} levels for RACT are based on Low NO{sub x} Burners (LNB) and are in the range of 0.4 to 0.5 lb/10{sup 6} Btu. As a result, there has been little industry demand for higher efficiency and more expensive NO{sub x} controls such as reburning, Selective Non-Catalytic Reduction (SNCR), and Selective Catalytic Reduction (SCR). However, the current RACT requirements will not be the end of NO{sub x} regulations. Much more stringent NO{sub x} control will be required to bring many of the ozone non-attainment areas into compliance, particularly in the Northeast. This paper describes second generation advanced reburning for nitrogen oxides control.

  7. Development and testing of a high efficiency advanced coal combustor: Phase 3 -- Industrial boiler retrofit. Proof of concept testing summary (Task 3.0 Final topical report)

    SciTech Connect

    Patel, R.L.; Borio, R.; McGowan, J.G.

    1995-07-01

    Economics may one day dictate that it makes sense to replace oil or natural gas with coal in boilers that were originally designed to burn oil or gas. In recognition of this future possibility, Pittsburgh Energy Technical Center (PETC) has supported a program led by ABB Power Plant Laboratories in cooperation with the Energy and Fuels Research Center of Penn State University to develop the High Efficiency Advanced Coal Combustor (HEACC). The objective of the program is to demonstrate the technical and economic feasibility of retrofitting a gas/oil designed boiler to burn micronized coal. In support of the overall objective the following specific areas were targeted: a coal handling/preparation system that can meet the technical requirements for retrofitting microfine coal on a boiler designed for burning oil or natural gas; maintaining boiler thermal performance in accordance with specifications when burning oil or natural gas; maintaining NOx emissions at or below 0.6 lb NO{sub 2} per million Btu; achieving combustion efficiencies of 98% or higher; and calculating economic payback periods as a function of key variables. The work carried out under this program is broken into five major Tasks: review of current state-of-the-art coal firing system components; design and experimental testing of a prototype HEACC burner; installation and testing of a HEACC system in a retrofit application; economic evaluation of the HEACC concept for retrofit applications; and long term demonstration under user demand conditions. This report summarizes the work done under Task 3, the installation and testing of the HEACC burner in a 15,000 lb/hr package boiler located at Penn State. The period of testing was approximately 400 hours. Key findings are presented.

  8. Higher-efficiency photoelectrochemical electrodes of titanium dioxide-based nanoarrays sensitized simultaneously with plasmonic silver nanoparticles and multiple metal sulfides photosensitizers

    NASA Astrophysics Data System (ADS)

    Guo, Keying; Liu, Zhifeng; Han, Jianhua; Zhang, Xueqi; Li, Yajun; Hong, Tiantian; Zhou, Cailou

    2015-07-01

    This paper describes a novel design of high-efficiency photoelectrochemical water splitting electrode, i.e., ordered TiO2 nanorod arrays (NRs) sensitized simultaneously with noble metal (Ag), binary metal sulfides (Ag2S) and ternary metal sulfides (Ag3CuS2) multiple photosensitizers for the first time. The TiO2/Ag/Ag2S/Ag3CuS2 NRs heterostructure is successfully synthesized through successive ion layer adsorption and reaction (SILAR) and a simple ion-exchange process based on ionic reaction mechanism. On the basis of an optimal quantity of Ag, Ag2S and Ag3CuS2 nanoparticles, such TiO2/Ag/Ag2S/Ag3CuS2 NRs exhibit a higher photoelectrochemical activity ever reported for TiO2-based nanoarrays in PEC water splitting, the photocurrent density is up to 9.82 mA cm-2 at 0.47 V versus Ag/AgCl, respectively. This novel architecture is able to increase electron collection efficiency and suppress carrier recombination via (i) a higher efficiency of light-harvesting through these multiple photosensitizers (Ag, Ag2S and Ag3CuS2); (ii) the efficient separation of photo-induced electrons and holes due to the direct electrical pathways; (iii) the surface plasmon resonance (SPR) effect of Ag nanoparticles, which enhances the efficient charge separation and high carrier mobility. This work is useful to explore feasible routes to further enhance the performance of oxide semiconductors for PEC water splitting to produce clean H2 energy.

  9. Oxidation of advanced steam turbine alloys

    SciTech Connect

    Holcomb, G.R.; Covino, B.S., Jr.; Bullard, S.J.; Ziomek-Moroz, M.

    2006-03-01

    Advanced or ultra supercritical (USC) steam power plants offer the promise of higher efficiencies and lower emissions. Current goals of the U.S. Department of Energy’s Advanced Power Systems Initiatives include coal generation at 60% efficiency, which would require steam temperatures of up to 760°C. This research examines the steamside oxidation of advanced alloys for use in USC systems, with emphasis placed on alloys for high- and intermediate-pressure turbine sections.

  10. Efficiency of photosynthesis in a Chl d-utilizing cyanobacterium is comparable to or higher than that in Chl a-utilizing oxygenic species.

    PubMed

    Mielke, S P; Kiang, N Y; Blankenship, R E; Gunner, M R; Mauzerall, D

    2011-09-01

    The cyanobacterium Acaryochloris marina uses chlorophyll d to carry out oxygenic photosynthesis in environments depleted in visible and enhanced in lower-energy, far-red light. However, the extent to which low photon energies limit the efficiency of oxygenic photochemistry in A. marina is not known. Here, we report the first direct measurements of the energy-storage efficiency of the photosynthetic light reactions in A. marina whole cells, and find it is comparable to or higher than that in typical, chlorophyll a-utilizing oxygenic species. This finding indicates that oxygenic photosynthesis is not fundamentally limited at the photon energies employed by A. marina, and therefore is potentially viable in even longer-wavelength light environments.

  11. Efficiency of Photosynthesis in a Chl d-Utilizing Cyanobacterium is Comparable to or Higher than that in Chl a-Utilizing Oxygenic Species

    NASA Technical Reports Server (NTRS)

    Mielke, S. P.; Kiang, N. Y.; Blankenship, R. E.; Gunner, M. R.; Mauzerall, D.

    2011-01-01

    The cyanobacterium Acaryochloris marina uses chlorophyll d to carry out oxygenic photosynthesis in environments depleted in visible and enhanced in lower-energy, far-red light. However, the extent to which low photon energies limit the efficiency of oxygenic photochemistry in A. marina is not known. Here, we report the first direct measurements of the energy-storage efficiency of the photosynthetic light reactions in A. marina whole cells,and find it is comparable to or higher than that in typical, chlorophyll a-utilizing oxygenic species. This finding indicates that oxygenic photosynthesis is not fundamentally limited at the photon energies employed by A. marina, and therefore is potentially viable in even longer-wavelength light environments.

  12. Enhancing Cloud Radiative Processes and Radiation Efficiency in the Advanced Research Weather Research and Forecasting (WRF) Model

    SciTech Connect

    Iacono, Michael J.

    2015-03-09

    The objective of this research has been to evaluate and implement enhancements to the computational performance of the RRTMG radiative transfer option in the Advanced Research version of the Weather Research and Forecasting (WRF) model. Efficiency is as essential as accuracy for effective numerical weather prediction, and radiative transfer is a relatively time-consuming component of dynamical models, taking up to 30-50 percent of the total model simulation time. To address this concern, this research has implemented and tested a version of RRTMG that utilizes graphics processing unit (GPU) technology (hereinafter RRTMGPU) to greatly improve its computational performance; thereby permitting either more frequent simulation of radiative effects or other model enhancements. During the early stages of this project the development of RRTMGPU was completed at AER under separate NASA funding to accelerate the code for use in the Goddard Space Flight Center (GSFC) Goddard Earth Observing System GEOS-5 global model. It should be noted that this final report describes results related to the funded portion of the originally proposed work concerning the acceleration of RRTMG with GPUs in WRF. As a k-distribution model, RRTMG is especially well suited to this modification due to its relatively large internal pseudo-spectral (g-point) dimension that, when combined with the horizontal grid vector in the dynamical model, can take great advantage of the GPU capability. Thorough testing under several model configurations has been performed to ensure that RRTMGPU improves WRF model run time while having no significant impact on calculated radiative fluxes and heating rates or on dynamical model fields relative to the RRTMG radiation. The RRTMGPU codes have been provided to NCAR for possible application to the next public release of the WRF forecast model.

  13. A HIGHER EFFICIENCY OF CONVERTING GAS TO STARS PUSHES GALAXIES AT z ∼ 1.6 WELL ABOVE THE STAR-FORMING MAIN SEQUENCE

    SciTech Connect

    Silverman, J. D.; Rujopakarn, W.; Daddi, E.; Liu, D.; Sargent, M.; Renzini, A.; Feruglio, C.; Kashino, D.; Sanders, D.; Kartaltepe, J.; Nagao, T.; Arimoto, N.; Berta, S.; Lutz, D.; Béthermin, M.; Koekemoer, A.; and others

    2015-10-20

    Local starbursts have a higher efficiency of converting gas into stars, as compared to typical star-forming galaxies at a given stellar mass, possibly indicative of different modes of star formation. With the peak epoch of galaxy formation occurring at z > 1, it remains to be established whether such an efficient mode of star formation is occurring at high redshift. To address this issue, we measure the molecular gas content of seven high-redshift (z ∼ 1.6) starburst galaxies with the Atacama Large Millimeter/submillimeter Array and IRAM/Plateau de Bure Interferometer. Our targets are selected from the sample of Herschel far-infrared-detected galaxies having star formation rates (∼300–800 M{sub ⊙} yr{sup −1}) elevated (≳4×) above the star-forming main sequence (MS) and included in the FMOS-COSMOS near-infrared spectroscopic survey of star-forming galaxies at z ∼ 1.6 with Subaru. We detect CO emission in all cases at high levels of significance, indicative of high gas fractions (∼30%–50%). Even more compelling, we firmly establish with a clean and systematic selection that starbursts, identified as MS outliers, at high redshift generally have a lower ratio of CO to total infrared luminosity as compared to typical MS star-forming galaxies, although with a smaller offset than expected based on past studies of local starbursts. We put forward a hypothesis that there exists a continuous increase in star formation efficiency with elevation from the MS with galaxy mergers as a possible physical driver. Along with a heightened star formation efficiency, our high-redshift sample is similar in other respects to local starbursts, such as being metal rich and having a higher ionization state of the interstellar medium.

  14. Sustainability Efficiency Factor: Measuring Sustainability in Advanced Energy Systems through Exergy, Exergoeconomic, Life Cycle, and Economic Analyses

    NASA Astrophysics Data System (ADS)

    Boldon, Lauren

    The Encyclopedia of Life Support Systems defines sustainability or industrial ecology as "the wise use of resources through critical attention to policy, social, economic, technological, and ecological management of natural and human engineered capital so as to promote innovations that assure a higher degree of human needs fulfilment, or life support, across all regions of the world, while at the same time ensuring intergenerational equity" (Encyclopedia of Life Support Systems 1998). Developing and integrating sustainable energy systems to meet growing energy demands is a daunting task. Although the technology to utilize renewable energies is well understood, there are limited locations which are ideally suited for renewable energy development. Even in areas with significant wind or solar availability, backup or redundant energy supplies are still required during periods of low renewable generation. This is precisely why it would be difficult to make the switch directly from fossil fuel to renewable energy generation. A transition period in which a base-load generation supports renewables is required, and nuclear energy suits this need well with its limited life cycle emissions and fuel price stability. Sustainability is achieved by balancing environmental, economic, and social considerations, such that energy is produced without detriment to future generations through loss of resources, harm to the environment, etcetera. In essence, the goal is to provide future generations with the same opportunities to produce energy that the current generation has. This research explores sustainability metrics as they apply to a small modular reactor (SMR)-hydrogen production plant coupled with wind energy and storage technologies to develop a new quantitative sustainability metric, the Sustainability Efficiency Factor (SEF), for comparison of energy systems. The SEF incorporates the three fundamental aspects of sustainability and provides SMR or nuclear hybrid energy system

  15. Near isohydric grapevine cultivar displays higher photosynthetic efficiency and photorespiration rates under drought stress as compared with near anisohydric grapevine cultivar.

    PubMed

    Hochberg, Uri; Degu, Asfaw; Fait, Aaron; Rachmilevitch, Shimon

    2013-04-01

    Drought stress is known to limit photosynthesis rates and to inflict photo-oxidative damage in grapevines. Grapevines, which are considered drought-tolerant plants, are characterized by diverse hydraulic and photosynthetic behaviors, depending on the cultivar. This research compared the photosynthesis and the photorespiration of Cabernet Sauvignon (Cs) (isohydric) and Shiraz (anisohydric) in an attempt to acquire a wider perspective on the iso/anisohydric phenomenon and its implications. Shiraz and Cs were subjected to terminal drought in the greenhouse. Soil water content (θ), leaf water potential (Ψl ) and stomata conductance (gs ) were measured to determine the cultivars' hydraulic behavior. Gas exchange and fluorometry measurements were taken at 21 and 2% O2 to acquire photosynthesis and photorespiration characteristics. Cs was found to behave in a near isohydric manner whereas Shiraz behaved in a near anisohydric manner. Compared to Shiraz, the reduced stomata conductance values of Cs were accompanied by higher water use efficiency and photorespiration rates, as well as photosystem II photochemical potential (Fv /Fm ). As compared with Shiraz, Cs compensated for lower stomata conductance by higher photosynthesis and photorespiration. These two processes contributed to higher electron flow rates that might have a role in photoinhibition avoidance, which was observed in the stability of Fv /Fm under drought stress.

  16. Advanced nanoporous TiO2 photocatalysts by hydrogen plasma for efficient solar-light photocatalytic application

    PubMed Central

    An, Ha-Rim; Park, So Young; Kim, Hyeran; Lee, Che Yoon; Choi, Saehae; Lee, Soon Chang; Seo, Soonjoo; Park, Edmond Changkyun; Oh, You-Kwan; Song, Chan-Geun; Won, Jonghan; Kim, Youn Jung; Lee, Jouhahn; Lee, Hyun Uk; Lee, Young-Chul

    2016-01-01

    We report an effect involving hydrogen (H2)-plasma-treated nanoporous TiO2(H-TiO2) photocatalysts that improve photocatalytic performance under solar-light illumination. H-TiO2 photocatalysts were prepared by application of hydrogen plasma of assynthesized TiO2(a-TiO2) without annealing process. Compared with the a-TiO2, the H-TiO2 exhibited high anatase/brookite bicrystallinity and a porous structure. Our study demonstrated that H2 plasma is a simple strategy to fabricate H-TiO2 covering a large surface area that offers many active sites for the extension of the adsorption spectra from ultraviolet (UV) to visible range. Notably, the H-TiO2 showed strong ·OH free-radical generation on the TiO2 surface under both UV- and visible-light irradiation with a large responsive surface area, which enhanced photocatalytic efficiency. Under solar-light irradiation, the optimized H-TiO2 120(H2-plasma treatment time: 120 min) photocatalysts showed unprecedentedly excellent removal capability for phenol (Ph), reactive black 5(RB 5), rhodamine B (Rho B) and methylene blue (MB) — approximately four-times higher than those of the other photocatalysts (a-TiO2 and P25) — resulting in complete purification of the water. Such well-purified water (>90%) can utilize culturing of cervical cancer cells (HeLa), breast cancer cells (MCF-7), and keratinocyte cells (HaCaT) while showing minimal cytotoxicity. Significantly, H-TiO2 photocatalysts can be mass-produced and easily processed at room temperature. We believe this novel method can find important environmental and biomedical applications. PMID:27406992

  17. Advanced nanoporous TiO2 photocatalysts by hydrogen plasma for efficient solar-light photocatalytic application

    NASA Astrophysics Data System (ADS)

    An, Ha-Rim; Park, So Young; Kim, Hyeran; Lee, Che Yoon; Choi, Saehae; Lee, Soon Chang; Seo, Soonjoo; Park, Edmond Changkyun; Oh, You-Kwan; Song, Chan-Geun; Won, Jonghan; Kim, Youn Jung; Lee, Jouhahn; Lee, Hyun Uk; Lee, Young-Chul

    2016-07-01

    We report an effect involving hydrogen (H2)-plasma-treated nanoporous TiO2(H-TiO2) photocatalysts that improve photocatalytic performance under solar-light illumination. H-TiO2 photocatalysts were prepared by application of hydrogen plasma of assynthesized TiO2(a-TiO2) without annealing process. Compared with the a-TiO2, the H-TiO2 exhibited high anatase/brookite bicrystallinity and a porous structure. Our study demonstrated that H2 plasma is a simple strategy to fabricate H-TiO2 covering a large surface area that offers many active sites for the extension of the adsorption spectra from ultraviolet (UV) to visible range. Notably, the H-TiO2 showed strong ·OH free-radical generation on the TiO2 surface under both UV- and visible-light irradiation with a large responsive surface area, which enhanced photocatalytic efficiency. Under solar-light irradiation, the optimized H-TiO2 120(H2-plasma treatment time: 120 min) photocatalysts showed unprecedentedly excellent removal capability for phenol (Ph), reactive black 5(RB 5), rhodamine B (Rho B) and methylene blue (MB) — approximately four-times higher than those of the other photocatalysts (a-TiO2 and P25) — resulting in complete purification of the water. Such well-purified water (>90%) can utilize culturing of cervical cancer cells (HeLa), breast cancer cells (MCF-7), and keratinocyte cells (HaCaT) while showing minimal cytotoxicity. Significantly, H-TiO2 photocatalysts can be mass-produced and easily processed at room temperature. We believe this novel method can find important environmental and biomedical applications.

  18. Evaluation of higher distribution and/or utilization voltages. Third interim report (October 1979): analysis of individual component cost and/or energy efficiencies

    SciTech Connect

    Not Available

    1981-04-01

    This interim report provides documentation on the third task, Analysis of Individual Component Cost and/or Energy Efficiencies, of DOE Contract No. ET-78-C-01-2866, Evaluation of Higher Distribution and/or Utilization Voltages. The work performed under this task includes the development of both cost and energy loss models for the distribution and customer utilization system elements as well as the analysis of critical performance variables for the types of motors in end use elements, as a function of voltage level. The purpose of this task is to provide individual component cost and energy models which will be incorporated in the global system optimization program under Task 4. A major output of this task is a mathematical model for each component's cost and/or energy losses and a graphical representation of each model.

  19. Recycling efficiencies of C,H,O,N,S, and P elements in a biological life support system based on micro-organisms and higher plants

    NASA Astrophysics Data System (ADS)

    Gros, J. B.; Poughon, L.; Lasseur, C.; Tikhomirov, A. A.

    MELiSSA is a microorganism based artificial ecosystem conceived as a tool for understanding the behavior of ecosystems and developing the technology for future Manned Space Missions. MELiSSA is composed of four compartments colonized by the microorganisms required by the function of this ecosystem : breakdown of waste produced by men, regeneration of atmosphere and biosynthesis of edible biomass. This paper reports the mass balance description of a Biological Life Support System composed of the MELiSSA loop and of a Higher Plant Compartment working in parallel with the photosynthetic Spirulina compartment producing edible biomass. The recycling efficiencies of the system are determined and compared for various working conditions of the MELiSSA loop with or without the HPC.

  20. Higher Education Administrators' Perceptions of the Academic Quality Improvement Project as Compared to the Program to Evaluate and Advance Quality within the North Central Association of Colleges and Schools

    ERIC Educational Resources Information Center

    McDonough, Jennifer Nobles

    2012-01-01

    The purpose of this study was to examine higher education administrators' perceptions of the effectiveness of the Academic Quality Improvement Project (AQIP) as compared to the Program to Evaluate and Advance Quality (PEAQ) within the North Central Association of Colleges and Schools (NCA). The Higher Learning Commission (HLC), a commission of the…

  1. Charge Photogeneration (CPG) in Low-Band-Gap (LBG) Donor-Acceptor (D-A) Copolymers: Higher Efficiency in LBG Polymer-Fullerene Solar Cells

    NASA Astrophysics Data System (ADS)

    Aryanpour, Karan; Mazumdar, Sumit

    2014-03-01

    LBG copolymers (bandgap ~ 1.5 eV) of alternating D-A moieties have attracted substantial interest in photovoltaics. Power conversion efficiency over 10% has been reported for tandem LBG copolymer-fullerene solar cells. Understanding CPG in pristine LBG copolymers is a key step towards higher efficiency in LBG copolymer-fullerene solar cells. We present correlated-electron calculations within the Pariser-Parr-Pople model for excited states in LBG copolymers thieno[3,4-b]thiophene/benzodithiophene (PTB7) and poly[2,7-(5,5-bis-(3,7-dimethyloctyl)-5H-dithieno[3,2-b:2',3'-d]pyran)-alt-4,7-(5,6-difluoro-2,1,3-benzothia diazole)] (PDTP-DFBT). The goals are to understand ground state absorption, electroabsorption, and most importantly photoinduced absorptions in experiments. Of interest is the possible role of triplet excitons within the LBG donor domains in the CPG of LBG copolymers. Experiments present evidence on the high energy excited states as possible triplet-triplet (TT) combinations. While TT states in ``ordinary'' commonplace polymers may not play significant roles in photoinduced charge-transfer, they can possibly provide additional paths to CPG in the LBG copolymers other than the optical exciton and states close to it. Supported by NSF Grant No. CHE-1151475.

  2. An energy-efficient SIMD DSP with multiple VLIW configurations and an advanced memory access unit for LTE-A modem LSIs

    NASA Astrophysics Data System (ADS)

    Tomono, Mitsuru; Ito, Makiko; Nomura, Yoshitaka; Mouri, Makoto; Hirose, Yoshio

    2015-12-01

    Energy efficiency is the most important factor in the design of wireless modem LSIs for mobile handset systems. We have developed an energy-efficient SIMD DSP for LTE-A modem LSIs. Our DSP has mainly two hardware features in order to reduce energy consumption. The first one is multiple VLIW configurations to minimize accesses to instruction memories. The second one is an advanced memory access unit to realize complex memory accesses required for wireless baseband processing. With these features, performance of our DSP is about 1.7 times faster than a base DSP on average for standard LTE-A Libraries. Our DSP achieves about 20% improvement in energy efficiency compared to a base DSP for LTE-A modem LSIs.

  3. Advanced Reciprocating Engine Systems (ARES): Raising the Bar on Engine Technology with Increased Efficiency and Reduced Emissions, at Attractive Costs

    SciTech Connect

    2009-02-01

    This is a fact sheet on the U.S. Department of Energy's (DOE) Advanced Reciprocating Engine Systems program (ARES), which is designed to promote separate, but parallel engine development between the major stationary, gaseous fueled engine manufacturers in the United States.

  4. Linkages from DOE’s Vehicle Technologies R&D in Advanced Combustion to More Efficient, Cleaner-Burning Engines

    SciTech Connect

    Ruegg, Rosalie; Thomas, Patrick

    2011-06-01

    This report uses bibliometric analysis, supported by interview and review of documents and databases, to trace linkages from knowledge outputs resulting from DOE's advances in vehicle engine combustion to downstream innovations in commercial diesel engines and other areas. This analysis covers the period from 1974 through 2008 (and in some cases to early 2009).

  5. The evolution from asparagine or threonine to cysteine in position 146 contributes to generation of a more efficient and stable form of muscle creatine kinase in higher vertebrates.

    PubMed

    Zhao, Tong-Jin; Liu, Yang; Chen, Zhao; Yan, Yong-Bin; Zhou, Hai-Meng

    2006-01-01

    Creatine kinase, a key enzyme in vertebrate excitable tissues that require large energy fluxes, catalyzes the reversible transfer of phosphate between adenosine triphosphate and creatine. Sequence alignment indicated that the 146th amino acid is cysteine in the muscle creatine kinase of higher vertebrates including Amphibia, Reptilia, Aves and Mammalia. In fishes, it is cysteine in Agnatha and Chondrichthyes, and asparagine or threonine in Osteichthyes, which is the ancestor of Amphibia, Reptilia, Aves and Mammalia. To explore the structural and functional role of this special residue, a series of site-directed mutants of rabbit muscle creatine kinase were constructed, including C146S, C146N, C146T, C146G, C146A, C146D and C146R. A detailed comparison was made between wild-type creatine kinase and the mutants in catalytic activity, physico-chemical properties and structural stability against thermal inactivation and guanidine hydrochloride denaturation. It was found that except for C146S, the mutants had relatively lower catalytic activity and structural stability than Wt-CK. Wt-CK and C146S were the most stable ones, followed by C146N and C146T, and then C146G and C146A, and C146D and C146R were the least stable mutants. These results suggested that the 146th residue plays a crucial role in maintaining the structural stability of creatine kinase, and that the evolution in this amino acid from asparagine or threonine to cysteine contributes to the generation of a more efficient and more stable form of creatine kinase in higher vertebrates.

  6. Oxidation of alloys for advanced steam turbines

    SciTech Connect

    Holcomb, Gordon R.; Covino, Bernard S., Jr.; Bullard, Sophie J.; Ziomek-Moroz, M.; Alman, David E.

    2005-01-01

    Ultra supercritical (USC) power plants offer the promise of higher efficiencies and lower emissions. Current goals of the U.S. Department of Energy’s Advanced Power Systems Initiatives include coal generation at 60% efficiency, which would require steam temperatures of up to 760°C. This research examines the steamside oxidation of advanced alloys for use in USC systems, with emphasis placed on alloys for high- and intermediate-pressure turbine sections.

  7. Measuring Academic Library Efficiency and Alignment with Institutional Resource Utilization Priorities Using Data Envelopment Analysis: An Analysis of Institutions of Higher Education in Texas and Their Libraries

    ERIC Educational Resources Information Center

    Shupala, Christine M.

    2012-01-01

    Academic and library administrators are increasingly required to demonstrate efficiency in programs, services, and operations as well as effectiveness. An important component of efficiency measurement is identification of a relevant peer group against which to compare the administrative unit to determine relative efficiency. The two-fold purpose…

  8. Robotics Scoping Study to Evaluate Advances in Robotics Technologies that Support Enhanced Efficiencies for Yucca Mountain Repository Operations

    SciTech Connect

    T. Burgess; M. Noakes; P. Spampinato

    2005-03-17

    This paper presents an evaluation of robotics and remote handling technologies that have the potential to increase the efficiency of handling waste packages at the proposed Yucca Mountain High-Level Nuclear Waste Repository. It is expected that increased efficiency will reduce the cost of operations. The goal of this work was to identify technologies for consideration as potential projects that the U.S. Department of Energy Office of Civilian Radioactive Waste Management, Office of Science and Technology International Programs, could support in the near future, and to assess their ''payback'' value. The evaluation took into account the robotics and remote handling capabilities planned for incorporation into the current baseline design for the repository, for both surface and subsurface operations. The evaluation, completed at the end of fiscal year 2004, identified where significant advantages in operating efficiencies could accrue by implementing any given robotics technology or approach, and included a road map for a multiyear R&D program for improvements to remote handling technology that support operating enhancements.

  9. Advances in performance and beam quality of 9xx-nm laser diodes tailored for efficient fiber coupling

    NASA Astrophysics Data System (ADS)

    Lauer, Christian; König, Harald; Grönninger, Günther; Hein, Sebastian; Gomez-Iglesias, Alvaro; Furitsch, Michael; Maric, Josip; Kissel, Heiko; Wolf, Paul; Biesenbach, Jens; Strauss, Uwe

    2012-03-01

    The impact of new direct-diode and fiber laser systems on industrial manufacturing drives the demand for highbrightness diode laser pump sources suitable for simple fiber coupling with high efficiency. Within the German funded project HEMILAS laser mini-bars with different bar geometries and small fill factors were investigated. We present results on 9xx nm bars with tailored beam parameter products for simplified coupling to fibers with core diameters of 200μm and 300μm with a numerical aperture of 0.22 and compare beam quality parameters, brightness, conversion efficiency, and thermal performance of different bar designs. Optimized epitaxy structures yield conversion efficiency maxima above 66%. The slow axis divergence angle of mini-bars with a fill factor of 10% featuring five 100μm wide and 4mm long emitters based on this epitaxy structure stays below 7°, which corresponds to a beam parameter product of 15mm mrad, up to very high output power of over 45W. This result was achieved for mounting on actively cooled submounts using hard solder. A similar bar with 5mm cavity length and using soft soldering reached an output power of 60W at the same beam parameter product. At 4mm cavity length, no COMD failures were observed up to currents exceeding the thermal rollover and the maximum output cw power was 95W.

  10. On the Path to SunShot - The Role of Advancements in Solar Photovoltaic Efficiency, Reliability, and Costs

    SciTech Connect

    Woodhouse, Michael; Jones-Albertus, Rebecca; Feldman, David; Fu, Ran; Horowitz, Kelsey; Chung, Donald; Jordan, Dirk; Kurtz, Sarah

    2016-05-01

    Although tremendous progress has been made in reducing the cost of PV systems, additional LCOE reductions of 40%–50% between 2015 and 2020 will be required to reach the SunShot Initiative’s targets (see Woodhouse et al. 2016). Understanding the tradeoffs between installed prices and other PV system characteristics—such as module efficiency, module degradation rate, and system lifetime—are vital. For example, with 29%-efficient modules and high reliability (a 50-year lifetime and a 0.2%/year module degradation rate), a residential PV system could achieve the SunShot LCOE goal with modules priced at almost $1.20/W. But change the lifetime to 10 years and the degradation rate to 2%/year, and the system would need those very high-efficiency modules at zero cost to achieve the same LCOE. Although these examples are extreme, they serve to illustrate the wide range of technological combinations that could help drive PV toward the LCOE goals. SunShot’s PV roadmaps illustrate specific potential pathways to the target cost reductions.

  11. On the Path to SunShot. The Role of Advancements in Solar Photovoltaic Efficiency, Reliability, and Costs

    SciTech Connect

    Woodhouse, Michael; Jones-Albertus, Rebecca; Feldman, David; Fu, Ran; Horowitz, Kelsey; Chung, Donald; Jordan, Dirk; Kurtz, Sarah

    2016-05-01

    This report examines the remaining challenges to achieving the competitive photovoltaic (PV) costs and large-scale deployment envisioned under the U.S. Department of Energy's SunShot Initiative. Solar-energy cost reductions can be realized through lower PV module and balance-of-system (BOS) costs as well as improved system efficiency and reliability. Numerous combinations of PV improvements could help achieve the levelized cost of electricity (LCOE) goals because of the tradeoffs among key metrics like module price, efficiency, and degradation rate as well as system price and lifetime. Using LCOE modeling based on bottom-up cost analysis, two specific pathways are mapped to exemplify the many possible approaches to module cost reductions of 29%-38% between 2015 and 2020. BOS hardware and soft cost reductions, ranging from 54%-77% of total cost reductions, are also modeled. The residential sector's high supply-chain costs, labor requirements, and customer-acquisition costs give it the greatest BOS cost-reduction opportunities, followed by the commercial sector, although opportunities are available to the utility-scale sector as well. Finally, a future scenario is considered in which very high PV penetration requires additional costs to facilitate grid integration and increased power-system flexibility--which might necessitate even lower solar LCOEs. The analysis of a pathway to 3-5 cents/kWh PV systems underscores the importance of combining robust improvements in PV module and BOS costs as well as PV system efficiency and reliability if such aggressive long-term targets are to be achieved.

  12. Improved Round Trip Efficiency for Regenerative Fuel Cell Systems

    DTIC Science & Technology

    2011-04-04

    advanced membrane materials that enable higher efficiency electrolysis , substantially improving the practical energy density for regenerative fuel cell... electrolysis system for recharging the reactants, and reactant storage. These water- based energy storage systems have been shown to perform...catalyst materials will enable higher efficiency electrolysis , substantially improving the practical energy density for regenerative fuel cell applications

  13. Advanced Applications of Adifor 3.0 for Efficient Calculation of First-and Second-Order CFD Sensitivity Derivatives

    NASA Technical Reports Server (NTRS)

    Taylor, Arthur C., III

    2004-01-01

    This final report will document the accomplishments of the work of this project. 1) The incremental-iterative (II) form of the reverse-mode (adjoint) method for computing first-order (FO) aerodynamic sensitivity derivatives (SDs) has been successfully implemented and tested in a 2D CFD code (called ANSERS) using the reverse-mode capability of ADIFOR 3.0. These preceding results compared very well with similar SDS computed via a black-box (BB) application of the reverse-mode capability of ADIFOR 3.0, and also with similar SDs calculated via the method of finite differences. 2) Second-order (SO) SDs have been implemented in the 2D ASNWERS code using the very efficient strategy that was originally proposed (but not previously tested) of Reference 3, Appendix A. Furthermore, these SO SOs have been validated for accuracy and computational efficiency. 3) Studies were conducted in Quasi-1D and 2D concerning the smoothness (or lack of smoothness) of the FO and SO SD's for flows with shock waves. The phenomenon is documented in the publications of this study (listed subsequently), however, the specific numerical mechanism which is responsible for this unsmoothness phenomenon was not discovered. 4) The FO and SO derivatives for Quasi-1D and 2D flows were applied to predict aerodynamic design uncertainties, and were also applied in robust design optimization studies.

  14. Towards efficient bioethanol production from agricultural and forestry residues: Exploration of unique natural microorganisms in combination with advanced strain engineering.

    PubMed

    Zhao, Xinqing; Xiong, Liang; Zhang, Mingming; Bai, Fengwu

    2016-09-01

    Production of fuel ethanol from lignocellulosic feedstocks such as agricultural and forestry residues is receiving increasing attention due to the unsustainable supply of fossil fuels. Three key challenges include high cellulase production cost, toxicity of the cellulosic hydrolysate to microbial strains, and poor ability of fermenting microorganisms to utilize certain fermentable sugars in the hydrolysate. In this article, studies on searching of natural microbial strains for production of unique cellulase for biorefinery of agricultural and forestry wastes, as well as development of strains for improved cellulase production were reviewed. In addition, progress in the construction of yeast strains with improved stress tolerance and the capability to fully utilize xylose and glucose in the cellulosic hydrolysate was also summarized. With the superior microbial strains for high titer cellulase production and efficient utilization of all fermentable sugars in the hydrolysate, economic biofuels production from agricultural residues and forestry wastes can be realized.

  15. Visual and efficient immunosensor technique for advancing biomedical applications of quantum dots on Salmonella detection and isolation

    NASA Astrophysics Data System (ADS)

    Tang, Feng; Pang, Dai-Wen; Chen, Zhi; Shao, Jian-Bo; Xiong, Ling-Hong; Xiang, Yan-Ping; Xiong, Yan; Wu, Kai; Ai, Hong-Wu; Zhang, Hui; Zheng, Xiao-Li; Lv, Jing-Rui; Liu, Wei-Yong; Hu, Hong-Bing; Mei, Hong; Zhang, Zhen; Sun, Hong; Xiang, Yun; Sun, Zi-Yong

    2016-02-01

    It is a great challenge in nanotechnology for fluorescent nanobioprobes to be applied to visually detect and directly isolate pathogens in situ. A novel and visual immunosensor technique for efficient detection and isolation of Salmonella was established here by applying fluorescent nanobioprobes on a specially-designed cellulose-based swab (a solid-phase enrichment system). The selective and chromogenic medium used on this swab can achieve the ultrasensitive amplification of target bacteria and form chromogenic colonies in situ based on a simple biochemical reaction. More importantly, because this swab can serve as an attachment site for the targeted pathogens to immobilize and immunologically capture nanobioprobes, our mAb-conjugated QD bioprobes were successfully applied on the solid-phase enrichment system to capture the fluorescence of targeted colonies under a designed excitation light instrument based on blue light-emitting diodes combined with stereomicroscopy or laser scanning confocal microscopy. Compared with the traditional methods using 4-7 days to isolate Salmonella from the bacterial mixture, this method took only 2 days to do this, and the process of initial screening and preliminary diagnosis can be completed in only one and a half days. Furthermore, the limit of detection can reach as low as 101 cells per mL Salmonella on the background of 105 cells per mL non-Salmonella (Escherichia coli, Proteus mirabilis or Citrobacter freundii, respectively) in experimental samples, and even in human anal ones. The visual and efficient immunosensor technique may be proved to be a favorable alternative for screening and isolating Salmonella in a large number of samples related to public health surveillance.It is a great challenge in nanotechnology for fluorescent nanobioprobes to be applied to visually detect and directly isolate pathogens in situ. A novel and visual immunosensor technique for efficient detection and isolation of Salmonella was established here

  16. Advances in radiation modeling in ALEGRA :a final report for LDRD-67120, efficient implicit mulitgroup radiation calculations.

    SciTech Connect

    Mehlhorn, Thomas Alan; Kurecka, Christopher J.; McClarren, Ryan; Brunner, Thomas A.; Holloway, James Paul

    2005-11-01

    The original LDRD proposal was to use a nonlinear diffusion solver to compute estimates for the material temperature that could then be used in a Implicit Monte Carlo (IMC) calculation. At the end of the first year of the project, it was determined that this was not going to be effective, partially due to the concept, and partially due to the fact that the radiation diffusion package was not as efficient as it could be. The second, and final year, of the project focused on improving the robustness and computational efficiency of the radiation diffusion package in ALEGRA. To this end, several new multigroup diffusion methods have been developed and implemented in ALEGRA. While these methods have been implemented, their effectiveness of reducing overall simulation run time has not been fully tested. Additionally a comprehensive suite of verification problems has been developed for the diffusion package to ensure that it has been implemented correctly. This process took considerable time, but exposed significant bugs in both the previous and new diffusion packages, the linear solve packages, and even the NEVADA Framework's parser. In order to manage this large suite of problem, a new tool called Tampa has been developed. It is a general tool for automating the process of running and analyzing many simulations. Ryan McClarren, at the University of Michigan has been developing a Spherical Harmonics capability for unstructured meshes. While still in the early phases of development, this promises to bridge the gap in accuracy between a full transport solution using IMC and the diffusion approximation.

  17. The Meaning of CAPHE. A Report on the First Five Years of the Consortium for the Advancement of Private Higher Education.

    ERIC Educational Resources Information Center

    Moskin, Robert J.

    This report reviews the first five years of the Consortium for the Advancement of Private Education (CAPHE) during which it has assisted small liberal arts colleges in the United States. Questions concerning the condition of these colleges today are addressed, as well as CAPHE's ability to help them and make a difference in their viability and the…

  18. InGaAsN: A Novel Material for High-Efficiency Solar Cells and Advanced Photonic Devices

    SciTech Connect

    Allerman, Andrew A.; Follstaedt, David M.; Gee, James M.; Jones, Eric D.; Kurtz, Steven R.; Modine, Norman A.

    1999-07-01

    This report represents the completion of a 6 month Laboratory-Directed Research and Development (LDRD) program that focused on research and development of novel compound semiconductor, InGaAsN. This project seeks to rapidly assess the potential of InGaAsN for improved high-efficiency photovoltaic. Due to the short time scale, the project focused on quickly investigating the range of attainable compositions and bandgaps while identifying possible material limitations for photovoltaic devices. InGaAsN is a new semiconductor alloy system with the remarkable property that the inclusion of only 2% nitrogen reduces the bandgap by more than 30%. In order to help understand the physical origin of this extreme deviation from the typically observed nearly linear dependence of alloy properties on concentration, we have investigated the pressure dependence of the excited state energies using both experimental and theoretical methods. We report measurements of the low temperature photoluminescence energy of the material for pressures between ambient and 110 kbar. We describe a simple, density-functional-theory-based approach to calculating the pressure dependence of low lying excitation energies for low concentration alloys. The theoretically predicted pressure dependence of the bandgap is in excellent agreement with the experimental data. Based on the results of our calculations, we suggest an explanation for the strongly non-linear pressure dependence of the bandgap that, surprisingly, does not involve a nitrogen impurity band. Additionally, conduction-band mass measurements, measured by three different techniques, will be described and finally, the magnetoluminescence determined pressure coefficient for the conduction-band mass is measured. The design, growth by metal-organic chemical vapor deposition, and processing of an In{sub 0.07}Ga{sub 0.93}As{sub 0.98}N{sub 0.02} solar cell, with 1.0 eV bandgap, lattice matched to GaAs is described. The hole diffusion length in

  19. Influence of advancing season on dietary composition, intake, site of digestion, and microbial efficiency in beef steers grazing a native range in western North Dakota.

    PubMed

    Cline, H J; Neville, B W; Lardy, G P; Caton, J S

    2009-01-01

    Four ruminally and duodenally cannulated beef steers (388 +/- 12 kg) were used to evaluate effects of advancing season on forage quality, intake, site of digestion, and microbial efficiency while grazing mixed-grass prairie in western North Dakota. Five 11-d sample collections were conducted from late June to mid-November. Chromic oxide (8 g) was dosed twice daily at 0700 and 1900 h via gelatin capsule from d 2 to 11 of each collection period, and duodenal and fecal collections were performed on d 7 to 11. Masticate samples were collected for each sampling period. Dietary N declined linearly (P = 0.01), from 1.95% in June to 1.15% in November, whereas NDF increased linearly (P = 0.01), 72.4% in June to 85.1% in November. Total OM intake (g/kg of BW) decreased linearly (P advancing season. Total tract OM, N, and NDF digestion declined linearly (P efficiency (g of microbial N/kg of OM truly fermented) increased linearly (P = 0.02) from late June to late November. Undegradable intake protein (UIP) intake (g/d) declined (P advancing season. Likewise, microbial CP supply at the duodenum (g/d) declined linearly (P advanced. As expected, DIP (% of CP) decreased (P advancing season. The portions of DIP and UIP (% of CP) were not different in late August and mid-September. These data imply that

  20. Development and testing of a high efficiency advanced coal combustor Phase III industrial boiler retrofit. Quarterly technical progress report, July 1, 1995--September 30, 1995 No. 16

    SciTech Connect

    Borio, R.W.

    1995-12-15

    The objective of this project is to retrofit a burner, capable of firing microfine coal, to a standard gas/oil designed industrial boiler to assess the technical and economic viability of displacing premium fuels with microfine coal. This report documents the technical aspects of this project during the sixteenth quarter (July `95 through September `95) of the program. The overall program has consisted of five major tasks: (1) A review of current state-of-the-art coal firing system components. (2) Design and experimental testing of a prototype HEACC (High Efficiency Advanced Coal Combustor) burner. (3) Installation and testing of a prototype HEACC system in a commercial retrofit application. (4) Economics evaluation of the HEACC concept for retrofit applications. (5) Long term demonstration under commercial user demand conditions.

  1. Perspectives on Higher Education

    ERIC Educational Resources Information Center

    Mayhew, Lewis B.

    1971-01-01

    A review of Human Resources and Higher Education: Staff Report of the Commission on Human Resources and Advanced Education (New York; Basic, 1970) by John K. Folger, Helen S. Astin, and Alan E. Bayer. (DB)

  2. An Investigation of the Higher Order Grapheme-Phoneme Correspondences That Occur in English and the Means of Teaching Them Efficiently. Final Report.

    ERIC Educational Resources Information Center

    Caldwell, Edward C.

    The research reported here consists of three projects: Project I confirmed the hypothesis that as rules become more complex, direct rule learning becomes less efficient, compared to teaching by examples. Based on three experiments, Experiment 1 compared the inductive and deductive teaching of simple one-to-one correspondence rules; Experiment 2,…

  3. Development of an Advanced Deshaling Technology to Improve the Energy Efficiency of Coal Handling, Processing, and Utilization Operations

    SciTech Connect

    Rick Honaker; Gerald Luttrell

    2007-09-30

    The concept of using a dry, density-based separator to achieve efficient, near-face rock removal, commonly referred to as deshaling, was evaluated in several applications across the U.S.. Varying amounts of high-density rock exist in most run-of-mine feed. In the central Appalachian coalfields, a rock content exceeding 50% in the feed to a preparation plant is commonplace due to high amounts of out-of-seam dilution made necessary by extracting coal from thin seams. In the western U.S, an increase in out-of-seam dilution and environmental regulations associated with combustion emissions have resulted in a need to clean low rank coals and dry cleaning may be the only option. A 5 ton/hr mobile deshaling unit incorporating a density-based, air-table technology commercially known as the FGX Separator has been evaluated at mine sites located within the states of Utah, Wyoming, Texas, West Virginia, Virginia, Pennsylvania and Kentucky. The FGX technology utilizes table riffling principles with air as the medium. Air enters through the table and creates a fluidized bed of particles comprised of mostly fine, high density particles. The high density particle bed lifts the low-density coal particles to the top of the bed. The low-density coal moves toward the front of the table due to mass action and the downward slope of the table. The high-density particles settle through the fluidized particle bed and, upon making contact with the table, moves toward the back of the table with the assistance of table vibration. As a result, the low-density coal particles exit the front of the table closest to the feed whereas the high-density, high-ash content particles leave on the side and front of the table located at the farthest from the feed entry. At each test site, the run-of-mine feed was either directly fed to the FGX unit or pre-screened to remove the majority of the -6mm material. The surface moisture of the feed must be maintained below 9%. Pre-screening is required when the

  4. Novel frequency domain techniques and advances in Finite Difference Time domain (FDTD) method for efficient solution of multiscale electromagnetic problems

    NASA Astrophysics Data System (ADS)

    Panayappan, Kadappan

    efficiently; (ii) handling non-Cartesian geometries such as curved surfaces accurately without staircasing; (iii) handling thin structures, with or without finite losses; and (iv) dealing with multi-scale geometries.

  5. Development and testing of a high efficiency advanced coal combustor: Phase 3, industrial boiler retrofit. Quarterly technical progress report number 12, July 1, 1994--September 30, 1994

    SciTech Connect

    Patel, R.L.; Borio, R.; McGowan, J.G.

    1994-11-18

    The objective of this project is to retrofit the previously developed High Efficiency Advanced Coal Combustor (HEACC) to a standard gas/oil designed industrial boiler to assess the technical and economic viability of displacing premium fuels with microfine coal. During this reporting period, data reduction/evaluation and interpretation from the long term four hundred hours Proof-of-Concept System Test under Task 3 were completed. Cumulatively, a total of approximately 563 hours of coal testing was performed with 160 hrs on 100% coal and over 400 hours with co-firing coal and gas. The primary objectives of this testing were to: (1) obtain steady state operation consistently on 100% coal; (2) increase carbon conversion efficiency from 95% to the project goal of 98%; and (3) maintain NOx emissions at or below 0.6 lbs/MBtu. The following specific conclusions are based on results of coal-fired testing at Penn State and the initial economic evaluation of the HEACC system: a coal handling/preparation system can be designed to meet the technical requirements for retrofitting microfine coal combustion to a gas/oil-designed boiler; the boiler thermal performance requirements were met; the NOx emission target of was met; combustion efficiencies of 95% could be met on a daily average basis, somewhat below the target of 98%; the economic playback is very sensitive to fuel differential cost, unit size, and annual operating hours; continuous long term demonstration is needed to quantify ash effects and how to best handle ashes. The following modifications are recommended prior to the 1,000 hour demonstration phase testing: (1) coal feeding improvements--improved raw coal/storage and transport, installation of gravimetric feeder, and redesign/installation of surge bin bottom; (2) burner modification--minor modification to the tip of the existing HEACC burner to prevent change of flame shapes for no apparent reason.

  6. High efficiency solar cell processing

    NASA Technical Reports Server (NTRS)

    Ho, F.; Iles, P. A.

    1985-01-01

    At the time of writing, cells made by several groups are approaching 19% efficiency. General aspects of the processing required for such cells are discussed. Most processing used for high efficiency cells is derived from space-cell or concentrator cell technology, and recent advances have been obtained from improved techniques rather than from better understanding of the limiting mechanisms. Theory and modeling are fairly well developed, and adequate to guide further asymptotic increases in performance of near conventional cells. There are several competitive cell designs with promise of higher performance ( 20%) but for these designs further improvements are required. The available cell processing technology to fabricate high efficiency cells is examined.

  7. Efficiency and Quality in the Current Higher Education Context in Europe: An Application of the Data Envelopment Analysis Methodology to Performance Assessment of Departments within the University of Zaragoza

    ERIC Educational Resources Information Center

    Martin, Emilio

    2006-01-01

    Since the Bologna Declaration, improving the efficiency and transparency of the systems of higher education has become one of the principal challenges for all European countries. In fact, the establishment of evaluation processes in programmes and institutions is a current practice. For this purpose, several mechanisms of evaluation are being…

  8. FY2013 Progress Report for Advanced Combustion Engine Research and Development

    SciTech Connect

    none,

    2013-12-01

    Annual progress report on the work of the the Advanced Combustion Engine Program. The Advanced Combustion Engine Program supports the Vehicle Technologies Office mission by addressing critical technical barriers to commercializing higher efficiency, very low emissions, advanced combustion engines for passenger and commercial vehicles that meet future federal emissions regulations.

  9. Highly Efficient and Selective Synthesis of Conjugated Triynes and Higher Oligoynes of Biological and Materials Chemical Interest via Palladium-Catalyzed Alkynyl-Alkenyl Coupling†

    PubMed Central

    Métay, Estelle; Hu, Qian

    2013-01-01

    Iteration of Pd-catalyzed reaction of alkynyl- and oligoynylzincs with (E)-ICH=CHCl followed by metalation-termination with electrophiles(E) has provided a linear route to conjugated tri- and tetraynes, while Pd-catalyzed monoalkynylation of 1,1-dibromoenynes accompanied by dehydrobromination has provided a convergent route to conjugated tri-, tetra-, and pentaynes. Both display unprecedent high efficiency and selectivity. PMID:17134269

  10. Hepatitis B virus genotype C isolates with wild-type core promoter sequence replicate less efficiently than genotype B isolates but possess higher virion secretion capacity.

    PubMed

    Qin, Yanli; Tang, Xiaoli; Garcia, Tamako; Hussain, Munira; Zhang, Jiming; Lok, Anna; Wands, Jack; Li, Jisu; Tong, Shuping

    2011-10-01

    Infection by hepatitis B virus (HBV) genotype C is associated with a prolonged viremic phase, delayed hepatitis B e antigen (HBeAg) seroconversion, and an increased incidence of liver cirrhosis and hepatocellular carcinoma compared with genotype B infection. Genotype C is also associated with the more frequent emergence of core promoter mutations, which increase genome replication and are independently associated with poor clinical outcomes. We amplified full-length HBV genomes from serum samples from Chinese and U. S. patients with chronic HBV infection and transfected circularized genome pools or dimeric constructs of individual clones into Huh7 cells. The two genotypes could be differentiated by Western blot analysis due to the reactivities of M and L proteins toward a monoclonal pre-S2 antibody and slightly different S-protein mobilities. Great variability in replication capacity was observed for both genotypes. The A1762T/G1764A core promoter mutations were prevalent in genotype C isolates and correlated with increased replication capacity, while the A1752G/T mutation frequently found in genotype B isolates correlated with a low replication capacity. Importantly, most genotype C isolates with wild-type core promoter sequence replicated less efficiently than the corresponding genotype B isolates due to less efficient transcription of the 3.5-kb RNA. However, genotype C isolates often displayed more efficient virion secretion. We propose that the low intracellular levels of viral DNA and core protein of wild-type genotype C delay immune clearance and trigger the subsequent emergence of A1762T/G1764A core promoter mutations to upregulate replication; efficient virion secretion compensates for the low replication capacity to ensure the establishment of persistent infection by genotype C.

  11. FY2015 Advanced Combustion Engine Annual Progress Report

    SciTech Connect

    Singh, Gurpreet; Gravel, Roland M.; Howden, Kenneth C.; Breton, Leo

    2016-03-25

    The Advanced Combustion Engine research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research focuses on addressing critical barriers to commercializing higher efficiency, very low emissions advanced internal combustion engines for passenger and commercial vehicles.

  12. FY2014 Advanced Combustion Engine Annual Progress Report

    SciTech Connect

    2015-03-01

    The Advanced Combustion Engine research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research focuses on addressing critical barriers to commercializing higher efficiency, very low emissions advanced internal combustion engines for passenger and commercial vehicles.

  13. BEAM LOADING AND HIGHER-BAND LONGITUDINAL WAKES IN HIGH PHASE ADVANCE TRAVELING WAVE ACCELERATOR STRUCTURES FOR THE GLC/NLC

    SciTech Connect

    Jones, R

    2004-07-30

    A multi-bunch beam, traversing travelling wave accelerator structures, each with a 5{pi}/6 phase advance per cell, is accelerated at a frequency that is synchronous with the fundamental mode frequency. As per design, the main interaction occurs at the working frequency of 11.424 GHz. However, modes with frequencies surrounding the dominant accelerating mode are also excited and these give rise to additional modal components to the wakefield. Here, we consider the additional modes in the context of X-band accelerator structures for the GLC/NLC (Global Linear Collider/Next Linear Collider). Finite element simulations and field mode-matching models are employed in order to calculate the wakefield.

  14. Enhancement of Efficiencies toward the Completion of Degree Programs by State Supported Institutions of Higher Education (In Compliance with Directives in SB 92-155).

    ERIC Educational Resources Information Center

    Colorado Commission on Higher Education, Denver.

    This report discusses measures taken in response to Colorado Senate Bill 92-155, which requests institutions of higher education in the state to ensure that students have the opportunity and needed assistance to complete degrees in a reasonable time. The report also examines degree completion times at Colorado colleges and universities, and…

  15. Air transportation energy efficiency - Alternatives and implications

    NASA Technical Reports Server (NTRS)

    Williams, L. J.

    1976-01-01

    Results from recent studies of air transportation energy efficiency alternatives are discussed, along with some of the implications of these alternatives. The fuel-saving alternatives considered include aircraft operation, aircraft modification, derivative aircraft, and new aircraft. In the near-term, energy efficiency improvements should be possible through small improvements in fuel-saving flight procedures, higher density seating, and higher load factors. Additional small near-term improvements could be obtained through aircraft modifications, such as the relatively inexpensive drag reduction modifications. Derivatives of existing aircraft could meet the requirements for new aircraft and provide energy improvements until advanced technology is available to justify the cost of a completely new design. In order to obtain significant improvements in energy efficiency, new aircraft must truly exploit advanced technology in such areas as aerodynamics, composite structures, active controls, and advanced propulsion.

  16. Eco-efficient agriculture for producing higher yields with lower greenhouse gas emissions: a case study of intensive irrigation wheat production in China

    NASA Astrophysics Data System (ADS)

    Cui, Z. L.; Ye, Y. L.; Ma, W. Q.; Chen, X. P.; Zhang, F. S.

    2013-10-01

    Although the concept of producing higher yields with reduced greenhouse gas (GHG) emissions is a goal that attracts increasing public and scientific attention, the tradeoff between crop productivity and GHG emissions in intensive agricultural production is not well understood. In this study, we investigated 33 sites of on-farm experiments to evaluate the tradeoff between grain yield and GHG emissions using two systems (conventional practice, CP; high-yielding systems, HY) of intensive irrigation wheat (Triticum aestivum L.) in China. Furthermore, we discussed the potential to produce higher yields with lower GHG emissions based on a survey of 2938 farmers. However, in both the HY and CP systems, wheat grain yield response to GHG emissions fit a linear-plateau model, whereas the curve for grain yield from the HY system was always higher than that from the CP system. Compared to the CP system, grain yield was 44% (2.6 Mg ha-1) higher in the HY system, while GHG emissions increased by only 2.5%, and GHG emission intensity was reduced by 29%. The current intensive irrigation wheat system with farmers' practice had a median yield and maximum GHG emission rate of 6.05 Mg ha-1 and 4783 kg CO2 eq ha-1, respectively; however, this system can be transformed to maintain yields while reducing GHG emissions by 40% (5.96 Mg ha-1, and 2890 kg CO2 eq ha-1). Further, the HY system was found to increase grain yield by 41% with a simultaneous reduction in GHG emissions by 38% (8.55 Mg ha-1, and 2961 kg CO2 eq ha-1, respectively). In the future, we suggest moving the tradeoff relationships and calculations from grain yield and GHG emissions, to new measures of productivity and environmental protection using innovative management technologies. This shift in focus is critical to achieve food and environmental security.

  17. Advancing techniques to constrain the geometry of the seismic rupture plane on subduction interfaces a priori: Higher-order functional fits

    USGS Publications Warehouse

    Hayes, G.P.; Wald, D.J.; Keranen, K.

    2009-01-01

    Ongoing developments in earthquake source inversions incorporate nonplanar fault geometries as inputs to the inversion process, improving previous approaches that relied solely on planar fault surfaces. This evolution motivates advancing the existing framework for constraining fault geometry, particularly in subduction zones where plate boundary surfaces that host highly hazardous earthquakes are clearly nonplanar. Here, we improve upon the existing framework for the constraint of the seismic rupture plane of subduction interfaces by incorporating active seismic and seafloor sediment thickness data with existing independent data sets and inverting for the most probable nonplanar subduction geometry. Constraining the rupture interface a priori with independent geological and seismological information reduces the uncertainty in the derived earthquake source inversion parameters over models that rely on simpler assumptions, such as the moment tensor inferred fault plane. Examples are shown for a number of wellconstrained global locations. We expand the coverage of previous analyses to a more uniform global data set and show that even in areas of sparse data this approach is able to accurately constrain the approximate subduction geometry, particularly when aided with the addition of data from local active seismic surveys. In addition, we show an example of the integration of many two-dimensional profiles into a threedimensional surface for the Sunda subduction zone and introduce the development of a new global threedimensional subduction interface model: Slab1.0. ?? 2009 by the American Geophysical Union.

  18. Comparison of halide impacts on the efficiency of contaminant degradation by sulfate and hydroxyl radical-based advanced oxidation processes (AOPs).

    PubMed

    Yang, Yi; Pignatello, Joseph J; Ma, Jun; Mitch, William A

    2014-02-18

    The effect of halides on organic contaminant destruction efficiency was compared for UV/H2O2 and UV/S2O8(2-) AOP treatments of saline waters; benzoic acid, 3-cyclohexene-1-carboxylic acid, and cyclohexanecarboxylic acid were used as models for aromatic, alkene, and alkane constituents of naphthenic acids in oil-field waters. In model freshwater, contaminant degradation was higher by UV/S2O8(2-) because of the higher quantum efficiency for S2O8(2-) than H2O2 photolysis. The conversion of (•)OH and SO4(•-) radicals to less reactive halogen radicals in the presence of seawater halides reduced the degradation efficiency of benzoic acid and cyclohexanecarboxylic acid. The UV/S2O8(2-) AOP was more affected by Cl(-) than the UV/H2O2 AOP because oxidation of Cl(-) is more favorable by SO4(•-) than (•)OH at pH 7. Degradation of 3-cyclohexene-1-carboxylic acid, was not affected by halides, likely because of the high reactivity of halogen radicals with alkenes. Despite its relatively low concentration in saline waters compared to Cl(-), Br(-) was particularly important. Br(-) promoted halogen radical formation for both AOPs resulting in ClBr(•-), Br2(•-), and CO3(•-) concentrations orders of magnitude higher than (•)OH and SO4(•-) concentrations and reducing differences in halide impacts between the two AOPs. Kinetic modeling of the UV/H2O2 AOP indicated a synergism between Br(-) and Cl(-), with Br(-) scavenging of (•)OH leading to BrOH(•-), and further reactions of Cl(-) with this and other brominated radicals promoting halogen radical concentrations. In contaminant mixtures, the conversion of (•)OH and SO4(•-) radicals to more selective CO3(•-) and halogen radicals favored attack on highly reactive reaction centers represented by the alkene group of 3-cyclohexene-1-carboxylic acid and the aromatic group of the model compound, 2,4-dihydroxybenzoic acid, at the expense of less reactive reaction centers such as aromatic rings and alkane groups

  19. Reimagining Christian Higher Education

    ERIC Educational Resources Information Center

    Hulme, E. Eileen; Groom, David E., Jr.; Heltzel, Joseph M.

    2016-01-01

    The challenges facing higher education continue to mount. The shifting of the U.S. ethnic and racial demographics, the proliferation of advanced digital technologies and data, and the move from traditional degrees to continuous learning platforms have created an unstable environment to which Christian higher education must adapt in order to remain…

  20. Memory-efficient table look-up optimized algorithm for context-based adaptive variable length decoding in H.264/advanced video coding

    NASA Astrophysics Data System (ADS)

    Wang, Jianhua; Cheng, Lianglun; Wang, Tao; Peng, Xiaodong

    2016-03-01

    Table look-up operation plays a very important role during the decoding processing of context-based adaptive variable length decoding (CAVLD) in H.264/advanced video coding (AVC). However, frequent table look-up operation can result in big table memory access, and then lead to high table power consumption. Aiming to solve the problem of big table memory access of current methods, and then reduce high power consumption, a memory-efficient table look-up optimized algorithm is presented for CAVLD. The contribution of this paper lies that index search technology is introduced to reduce big memory access for table look-up, and then reduce high table power consumption. Specifically, in our schemes, we use index search technology to reduce memory access by reducing the searching and matching operations for code_word on the basis of taking advantage of the internal relationship among length of zero in code_prefix, value of code_suffix and code_lengh, thus saving the power consumption of table look-up. The experimental results show that our proposed table look-up algorithm based on index search can lower about 60% memory access consumption compared with table look-up by sequential search scheme, and then save much power consumption for CAVLD in H.264/AVC.

  1. Characterization of AlMn TES Impedance, Noise, and Optical Efficiency in the First 150 mm Multichroic Array for Advanced ACTPol

    NASA Technical Reports Server (NTRS)

    Crowley, Kevin T.; Choi, Steve K.; Kuan, Jeffrey; Austermann, Jason E.; Beall, James A.; Datta, Rahul; Duff, Shannon M.; Gallardo, Patricia A.; Hasselfield, Matthew; Henderson, Shawn W.; Wollack, Edward J.

    2016-01-01

    The Advanced ACTPol (AdvACT) upgrade to the Atacama Cosmology Telescope features large arrays of multichroic pixels consisting of two orthogonal-polarization pairs of superconducting bolometers at two observing frequency bands. We present measurements of the detector properties and noise data in a subset of a fielded multichroic array of AlMn transition-edge sensor (TES) detectors. In this array, the distribution of critical temperature T(sub c) across detectors appears uniform at the percent level. The measured noise-equivalent power (NEP) distributions over approximately 1200 detectors are consistent with expectations. We find median NEPs of 4.0×10(exp -17) W/ v Hz for low-band detectors and 6.2×10(exp -17) W/ v Hz for high-band detectors under covered-window telescope test conditions with optical loading comparable to observing with precipitable water vapor approximately 0.5 mm. Lastly, we show the estimated detector optical efficiency, and demonstrate the ability to perform optical characterization over hundreds of detectors at once using a cryogenic blackbody source.

  2. Characterization of AlMn TES impedance, noise, and optical efficiency in the first 150 mm multichroic array for Advanced ACTPol

    NASA Astrophysics Data System (ADS)

    Crowley, Kevin T.; Choi, Steve K.; Kuan, Jeffrey; Austermann, Jason A.; Beall, James A.; Datta, Rahul; Duff, Shannon M.; Gallardo, Patricio A.; Hasselfield, Matthew; Henderson, Shawn W.; Ho, Shuay-Pwu P.; Koopman, Brian J.; Niemack, Michael D.; Salatino, Maria; Simon, Sara M.; Staggs, Suzanne T.; Wollack, Edward J.

    2016-07-01

    The Advanced ACTPol (AdvACT) upgrade to the Atacama Cosmology Telescope features large arrays of mul- tichroic pixels consisting of two orthogonal-polarization pairs of superconducting bolometers at two observing frequency bands. We present measurements of the detector properties and noise data in a subset of a fielded multichroic array of AlMn transition-edge sensor (TES) detectors. In this array, the distribution of critical temperature Tc across detectors appears uniform at the percent level. The measured noise-equivalent power (NEP) distributions over ˜1200 detectors are consistent with expectations. We find median NEPs of 4.0×10-17 √Hz for low-band detectors and 6.2x10-17√Hz for high-band detectors under covered-window telescope test conditions with optical loading comparable to observing with precipitable water vapor ˜ 0.5 mm. Lastly, we show the estimated detector optical efficiency, and demonstrate the ability to perform optical characterization over hundreds of detectors at once using a cryogenic blackbody source.

  3. Higher order structures of the 5'-proximal region decrease the efficiency of translation of the porcine pro-opiomelanocortin mRNA.

    PubMed

    Chevrier, D; Vézina, C; Bastille, J; Linard, C; Sonenberg, N; Boileau, G

    1988-01-15

    The SP6 polymerase/promoter system was used to synthesize porcine pro-opiomelanocortin mRNAs with nucleotide sequence deletions in the 5'- as well as 3'-untranslated and coding regions. The translational efficiency of the mutant mRNAs was evaluated by cell-free translation or by monitoring the rate and extent of ribosome binding in the presence of sparsomycin. The results of these experiments indicate that specific nucleotide sequences in the 5'-untranslated and coding regions of the pro-opiomelanocortin mRNA decrease its rate of translation. Structure mapping of the mRNA with double-strand and single-strand specific nucleases suggests that these sequences can form stable secondary structures.

  4. Increases in nitrogen uptake rather than nitrogen-use efficiency support higher rates of temperate forest productivity under elevated CO2

    SciTech Connect

    Finzi, Adrien C; Norby, Richard J; Califapietra, Carlo; Gielen, Birgit; Iversen, Colleen M; Jackson, Robert B; Kubiske, Mark E; Childs, Joanne; Schlesinger, William H; Ceulemans, Reinhart

    2007-01-01

    Forest ecosystems are important sinks for rising concentrations of atmospheric CO2. In a previous data synthesis of four forest FACE experiments (1), forest net primary production (NPP) increased by 23 2% when the forests were grown under atmospheric concentrations of CO2 predicted for the latter half of this century. Because nitrogen (N) availability commonly limits forest productivity, more N must be taken up from the soil and/or the N already assimilated by trees must be used more efficiently to support high rates of forest productivity under elevated CO2. Biogeochemical models predict that increases in forest NPP under elevated CO2 in N-limited ecosystems result in a significant increase in N-use efficiency (NUE), and that additional uptake of N by trees under elevated CO2 is only possible in ecosystems where N is not limiting. Here, experimental evidence demonstrates that patterns of N uptake and NUE under elevated CO2 differed from that predicted by biogeochemical models. The uptake of N increased under elevated CO2 at the Rhinelander, Duke and Oak Ridge National Laboratory (ORNL) FACE sites, yet fertilization studies at the Duke and ORNL FACE sites showed that tree growth and forest NPP were strongly limited by N availability. By contrast, NUE increased under elevated CO2 only at the POP-EUROFACE site where fertilization studies showed that N was not limiting to tree growth. In reviewing data from the forest FACE experiments, we suggest that some combination of increasing fine root production, increased rates of soil organic matter (SOM) decomposition, and increased allocation of carbon (C) to mycorrhizal fungi is likely to account for greater N uptake under elevated CO2 at the forest FACE sites. To accurately forecast the response of forest ecosystems to rising concentrations of atmospheric CO2, biogeochemical models must be reformulated to allow C transfers belowground that result in additional N uptake under elevated CO2.

  5. Integration of a Higher Plant Chamber into the European Space Agency's MELiSSA Pilot Plant: The Canadian Role in Advanced Life Support Test-Bed Development

    NASA Astrophysics Data System (ADS)

    Waters, Geoffrey; Lawson, Jamie; Gidzinski, Danuta; Stasiak, Michael; Dixon, Mike; Peiro, Enrique; Godia, Francesc; Paille, Christel; Fossen, Arnaud; Lamaze, Brigitte; Lasseur, Christophe

    The European Space Agency's Micro-Ecological Life Support System Alternative (MELiSSA) project has been conceived as a tool for developing the technology of future biological life support systems required for long-term human space exploration missions to the Moon or Mars. The main life support functions of MELiSSA are the recycling of waste (inedible plant biomass, human excrement), carbon dioxide and minerals and the production of food, fresh water and air revitalization. Based on the principle of an aquatic ecosystem, MELiSSA is comprised of four microbial compartments and a higher plant compartment integrated in a closed loop. Each compartment is studied, designed and demonstrated at laboratory scale before being scaled-up for subsequent integration into the MELISSA Pilot Plant (MPP) at the Universitat Aut`noma de Barcelona. Work related to higher plant cultivation systems, o which have been historically focussed at the University of Guelph's Controlled Environment Systems Research Facility (CESRF), has included design of the HPC for the MPP, the metabolic characterization of MELiSSA candidate crops and the validation of theoretical gas exchange and nutrient dynamic models, The presented paper will review some of the recent data and HPC design work of CESRF conducted as part of Canada's involvement in the MELiSSA program and its partnership in the development of the MPP terrestrial demonstration test-bed.

  6. Multicomponent linchpin couplings. Reaction of dithiane anions with terminal epoxides, epichlorohydrin, and vinyl epoxides: efficient, rapid, and stereocontrolled assembly of advanced fragments for complex molecule synthesis.

    PubMed

    Smith, Amos B; Pitram, Suresh M; Boldi, Armen M; Gaunt, Matthew J; Sfouggatakis, Chris; Moser, William H

    2003-11-26

    The development, application, and advantages of a one-flask multicomponent dithiane linchpin coupling protocol, over the more conventional stepwise addition of dithiane anions to electrophiles leading to the rapid, efficient, and stereocontrolled assembly of highly functionalized intermediates for complex molecule synthesis, are described. Competent electrophiles include terminal epoxides, epichlorohydrin, and vinyl epoxides. High chemoselectivity can be achieved with epichlorohydrin and vinyl epoxides. For vinyl epoxides, the steric nature of the dithiane anion is critical; sterically unencumbered dithiane anions afford S(N)2 adducts, whereas encumbered anions lead primarily to SN2' adducts. Mechanistic studies demonstrate that the SN2' process occurs via syn addition to the vinyl epoxide. Integration of the multicomponent tactic with epichlorohydrin and vinyl epoxides permits the higher-order union of four and five components.

  7. Comparative Quantification in Three-Dimensional Cultures reveals Epigenetic Memory and Higher Efficiency Retinogenesis in iPSCs Derived from Differentiated Rod Photoreceptors

    PubMed Central

    Hiler, Daniel; Chen, Xiang; Hazen, Jennifer; Kupriyanov, Sergey; Carroll, Patrick A.; Qu, Chunxu; Xu, Beisi; Johnson, Dianna; Griffiths, Lyra; Frase, Sharon; Rodriguez, Alberto R.; Martin, Greg; Zhang, Jiakun; Jeon, Jongrye; Fan, Yiping; Finkelstein, David; Eisenman, Robert N.; Baldwin, Kristin; Dyer, Michael A.

    2015-01-01

    Summary Cell-based therapies to treat retinal degeneration are now being tested in clinical trials. However, it is not known if the source of stem cells is important for the production of differentiated cells suitable for transplantation. To test this, we generated iPSCs murine rod photoreceptors (r-iPSCs) and scored their ability to make retina using a standardized quantitative protocol called STEM-RET. We discovered that r-iPSCs were more efficient at producing differentiated retina than embryonic stem cells (ESCs) or fibroblast-derived iPSCs (f-iPSCs). Retinae derived from f-iPSCs had a reduction in amacrine cells and other inner nuclear layer cells. Integrated epigenetic analysis showed that DNA methylation contributes to the defects in f-iPSC retinogenesis and that rod specific CTCF insulator protein binding sites may promote retinogenes in r-iPSCs. Taken together, our data suggest that the source of stem cells are important for producing retinal neurons in 3D organ cultures. PMID:26140606

  8. The influence of chitosan valence on the complexation and transfection of DNA: the weaker the DNA-chitosan binding the higher the transfection efficiency.

    PubMed

    Alatorre-Meda, Manuel; Taboada, Pablo; Hartl, Florian; Wagner, Tobias; Freis, Michael; Rodríguez, Julio R

    2011-01-01

    The DNA-chitosan polyplexes have attracted for some years now the attention of physical-chemists and biologists for their potential use in gene therapy, however, the correlation between the physicochemical properties of these polyplexes with their transfection efficiency remains still unclear. In a recent paper we demonstrated by means of DLS that the DNA-chitosan complexation is favored at acidic conditions considering that fewer amounts of chitosan were required to compact the DNA. As a second study, in the present work we analyze the influence of chitosan valence on the complexation and transfection of DNA. Three chitosans of different molecular weights (three different valences) are characterized as gene carriers at 25°C and pH 5 over a wide range of chitosan-Nitrogen to DNA-Phosphate molar ratios, N/P, by means of conductometry, electrophoretic mobility, isothermal titration calorimetry (ITC), transmission electron microscopy (TEM), atomic force microscopy (AFM), and β-galactosidase and luciferase expression assays.

  9. Browning of subcutaneous fat and higher surface temperature in response to phenotype selection for advanced endurance exercise performance in male DUhTP mice.

    PubMed

    Brenmoehl, J; Ohde, D; Albrecht, E; Walz, C; Tuchscherer, A; Hoeflich, A

    2017-02-01

    For the assessment of genetic or conditional factors of fat cell browning, novel and polygenic animal models are required. Therefore, the long-term selected polygenic mouse line DUhTP originally established in Dummerstorf for high treadmill performance is used. DUhTP mice are characterized by increased fat accumulation in the sedentary condition and elevated fat mobilization during mild voluntary physical activity. In the present study, the phenotype of fat cell browning of subcutaneous fat and a potential effect on oral glucose tolerance, an indicator of metabolic health, were addressed in DUhTP mice. Analysis of peripheral fat pads revealed increased brite (brown-in-white) subcutaneous adipose tissues and in subcutaneous fat from DUhTP mice higher levels of irisin and different markers of fat cell browning like T-box transcription factor (Tbx1), PPARα, and uncoupling protein (UCP1) (P < 0.05) when compared to unselected controls. UCP1 was further increased in subcutaneous fat from DUhTP mice in response to mild exercise (fourfold, P < 0.05). In addition, surface temperature of DUhTP mice was increased when compared to controls indicating a physiological effect of increased UCP1 expression. The present study suggests that DUhTP mice exhibit different markers of mitochondrial biogenesis and fat browning without external stimuli. At an age of 43 days, sedentary DUhTP mice have improved metabolic health as judged from lower levels of blood glucose after an oral glucose tolerance test. Consequently, the non-inbred mouse model DUhTP represents a novel model for the identification of fat cell browning mechanisms in white adipose tissues.

  10. Treatment efficiency and economic feasibility of biological oxidation, membrane filtration and separation processes, and advanced oxidation for the purification and valorization of olive mill wastewater.

    PubMed

    Ioannou-Ttofa, L; Michael-Kordatou, I; Fattas, S C; Eusebio, A; Ribeiro, B; Rusan, M; Amer, A R B; Zuraiqi, S; Waismand, M; Linder, C; Wiesman, Z; Gilron, J; Fatta-Kassinos, D

    2017-05-01

    Olive mill wastewater (OMW) is a major waste stream resulting from numerous operations that occur during the production stages of olive oil. The resulting effluent contains various organic and inorganic contaminants and its environmental impact can be notable. The present work aims at investigating the efficiency of (i) jet-loop reactor with ultrafiltration (UF) membrane system (Jacto.MBR), (ii) solar photo-Fenton oxidation after coagulation/flocculation pre-treatment and (iii) integrated membrane filtration processes (i.e. UF/nanofiltration (NF)) used for the treatment of OMW. According to the results, the efficiency of the biological treatment was high, equal to 90% COD and 80% total phenolic compounds (TPh) removal. A COD removal higher than 94% was achieved by applying the solar photo-Fenton oxidation process as post-treatment of coagulation/flocculation of OMW, while the phenolic fraction was completely eliminated. The combined UF/NF process resulted in very high conductivity and COD removal, up to 90% and 95%, respectively, while TPh were concentrated in the NF concentrate stream (i.e. 93% concentration). Quite important is the fact that the NF concentrate, a valuable and polyphenol rich stream, can be further valorized in various industries (e.g. food, pharmaceutical, etc.). The above treatment processes were found also to be able to reduce the initial OMW phytotoxicity at greenhouse experiments; with the effluent stream of solar photo-Fenton process to be the least phytotoxic compared to the other treated effluents. A SWOT (Strength, Weakness, Opportunities, Threats) analysis was performed, in order to determine both the strengths of each technology, as well as the possible obstacles that need to overcome for achieving the desired levels of treatment. Finally, an economic evaluation of the tested technologies was performed in an effort to measure the applicability and viability of these systems at real scale; highlighting that the cost cannot be regarded as

  11. An Efficient Strategy Combining SSR Markers- and Advanced QTL-seq-driven QTL Mapping Unravels Candidate Genes Regulating Grain Weight in Rice

    PubMed Central

    Daware, Anurag; Das, Sweta; Srivastava, Rishi; Badoni, Saurabh; Singh, Ashok K.; Agarwal, Pinky; Parida, Swarup K.; Tyagi, Akhilesh K.

    2016-01-01

    Development and use of genome-wide informative simple sequence repeat (SSR) markers and novel integrated genomic strategies are vital to drive genomics-assisted breeding applications and for efficient dissection of quantitative trait loci (QTLs) underlying complex traits in rice. The present study developed 6244 genome-wide informative SSR markers exhibiting in silico fragment length polymorphism based on repeat-unit variations among genomic sequences of 11 indica, japonica, aus, and wild rice accessions. These markers were mapped on diverse coding and non-coding sequence components of known cloned/candidate genes annotated from 12 chromosomes and revealed a much higher amplification (97%) and polymorphic potential (88%) along with wider genetic/functional diversity level (16–74% with a mean 53%) especially among accessions belonging to indica cultivar group, suggesting their utility in large-scale genomics-assisted breeding applications in rice. A high-density 3791 SSR markers-anchored genetic linkage map (IR 64 × Sonasal) spanning 2060 cM total map-length with an average inter-marker distance of 0.54 cM was generated. This reference genetic map identified six major genomic regions harboring robust QTLs (31% combined phenotypic variation explained with a 5.7–8.7 LOD) governing grain weight on six rice chromosomes. One strong grain weight major QTL region (OsqGW5.1) was narrowed-down by integrating traditional QTL mapping with high-resolution QTL region-specific integrated SSR and single nucleotide polymorphism markers-based QTL-seq analysis and differential expression profiling. This led us to delineate two natural allelic variants in two known cis-regulatory elements (RAV1AAT and CARGCW8GAT) of glycosyl hydrolase and serine carboxypeptidase genes exhibiting pronounced seed-specific differential regulation in low (Sonasal) and high (IR 64) grain weight mapping parental accessions. Our genome-wide SSR marker resource (polymorphic within/between diverse

  12. An Efficient Strategy Combining SSR Markers- and Advanced QTL-seq-driven QTL Mapping Unravels Candidate Genes Regulating Grain Weight in Rice.

    PubMed

    Daware, Anurag; Das, Sweta; Srivastava, Rishi; Badoni, Saurabh; Singh, Ashok K; Agarwal, Pinky; Parida, Swarup K; Tyagi, Akhilesh K

    2016-01-01

    Development and use of genome-wide informative simple sequence repeat (SSR) markers and novel integrated genomic strategies are vital to drive genomics-assisted breeding applications and for efficient dissection of quantitative trait loci (QTLs) underlying complex traits in rice. The present study developed 6244 genome-wide informative SSR markers exhibiting in silico fragment length polymorphism based on repeat-unit variations among genomic sequences of 11 indica, japonica, aus, and wild rice accessions. These markers were mapped on diverse coding and non-coding sequence components of known cloned/candidate genes annotated from 12 chromosomes and revealed a much higher amplification (97%) and polymorphic potential (88%) along with wider genetic/functional diversity level (16-74% with a mean 53%) especially among accessions belonging to indica cultivar group, suggesting their utility in large-scale genomics-assisted breeding applications in rice. A high-density 3791 SSR markers-anchored genetic linkage map (IR 64 × Sonasal) spanning 2060 cM total map-length with an average inter-marker distance of 0.54 cM was generated. This reference genetic map identified six major genomic regions harboring robust QTLs (31% combined phenotypic variation explained with a 5.7-8.7 LOD) governing grain weight on six rice chromosomes. One strong grain weight major QTL region (OsqGW5.1) was narrowed-down by integrating traditional QTL mapping with high-resolution QTL region-specific integrated SSR and single nucleotide polymorphism markers-based QTL-seq analysis and differential expression profiling. This led us to delineate two natural allelic variants in two known cis-regulatory elements (RAV1AAT and CARGCW8GAT) of glycosyl hydrolase and serine carboxypeptidase genes exhibiting pronounced seed-specific differential regulation in low (Sonasal) and high (IR 64) grain weight mapping parental accessions. Our genome-wide SSR marker resource (polymorphic within/between diverse cultivar

  13. Higher Education.

    ERIC Educational Resources Information Center

    Hendrickson, Robert M.; Gregory, Dennis E.

    Decisions made by federal and state courts during 1983 concerning higher education are reported in this chapter. Issues of employment and the treatment of students underlay the bulk of the litigation. Specific topics addressed in these and other cases included federal authority to enforce regulations against age discrimination and to revoke an…

  14. Higher Education.

    ERIC Educational Resources Information Center

    Hendrickson, Robert M.

    Litigation in 1987 was very brisk with an increase in the number of higher education cases reviewed. Cases discussed in this chapter are organized under four major topics: (1) intergovernmental relations; (2) employees, involving discrimination claims, tenured and nontenured faculty, collective bargaining and denial of employee benefits; (3)…

  15. Higher Education.

    ERIC Educational Resources Information Center

    Hendrickson, Robert M.; Finnegan, Dorothy E.

    The higher education case law in 1988 is extensive. Cases discussed in this chapter are organized under five major topics: (1) intergovernmental relations; (2) employees, involving discrimination claims, tenured and nontenured faculty, collective bargaining, and denial of employee benefits; (3) students, involving admissions, financial aid, First…

  16. Higher Education.

    ERIC Educational Resources Information Center

    Knowles, Laurence W.; Wedlock, Eldon D., Jr.

    Courts have been consistently reluctant to interfere with governing boards' powers to control the administration of institutions of higher education. This deference seems to be based on the belief that board expertise makes it significantly more qualified than are the courts to make the necessary administrative decisions. Uncritical deference by…

  17. Efficiency of bimaxillary advancement surgery in increasing the volume of the upper airways: a systematic review of observational studies and meta-analysis.

    PubMed

    Rosário, Henrique Damian; Oliveira, Gustavo Mussi Stefan; Freires, Irlan Almeida; de Souza Matos, Felipe; Paranhos, Luiz Renato

    2017-01-01

    Postsurgical changes of the airways have become a great point of interest because it has been reported that maxillomandibular advancement surgery can improve or eliminate obstructive sleep apnea; however, its treatment effectiveness is still controversial. The purpose of this systematic review and meta-analysis was to assess the effectiveness of maxillomandibular advancement surgery to increase upper airway volume in adults, comparing before and after treatment. Bibliographic searches of observational studies with no restriction of year or language were performed in the electronic databases PubMed, Scopus, ScienceDirect and SciELO for articles published up to April 2015. After verification of duplicate records, 1860 articles were examined. Of these, ten met the eligibility criteria, of which three were excluded for having poor methodological quality. The other seven articles were included in the systematic review and six in the meta-analysis, representing 83 patients. One study whose data were not given in absolute values was excluded from the meta-analysis. The meta-analysis showed a statistically significant difference between the averages of upper airway volume before and after surgery {7.86 cm(3) [95 % CI (6.22, 9.49), p = 1.00)}. Clinical evidence suggests that the upper airway volume is increased after maxillomandibular advancement surgery.

  18. Advanced techniques in laser-ion acceleration: Conversion efficiency, beam distribution and energy scaling in the Break-Out Afterburner regime

    NASA Astrophysics Data System (ADS)

    Jung, Daniel; Yin, Lin; Albright, Brian; Gautier, Donald; Hoerlein, Rainer; Johnson, Randall; Kiefer, Daniel; Letzring, Sam; Shah, Rahul; Palaniyappan, Sasikumar; Shimada, Tsutomu; Habs, Dietrich; Fernandez, Juan; Hegelich, Manuel

    2011-10-01

    Recently, increasing laser intensities and contrast made acceleration mechanisms such as the radiation pressure acceleration or the Break-Out Afterburner (BOA) accessible. These mechanisms efficiently couple laser energy into all target ion species, making them a competitive alternative to conventional accelerators. We here present experimental data addressing conversion efficiency and ion distribution scaling for both carbon C6+ and protons within the BOA regime and the transit into the TNSA regime. Unique high resolution measurements of angularly resolved carbon C6+ and proton energy spectra for targets ranging from 30nm to 25microns - recorded with a novel ion wide angle spectrometer - are presented and used to derive thickness scaling estimates. While the measured conversion efficiency for C6+ reaches up to ~6%, peak energies of 1GeV and 120MeV have been measured for C6+ and protons, respectively.

  19. Advanced ceramics for environmental protection

    SciTech Connect

    Chambers, J.A.

    1994-12-31

    Advanced ceramic materials offer significant thermodynamic efficiency advantages over metals and alloys because of their higher use temperatures. Using ceramic components results in higher temperature industrial processes which convert fuels to energy more efficiently, reducing environmental emissions. Ceramics have always offered high temperature strength and superior corrosion and erosion resistance. However, brittleness, poor thermal stock resistance and catastrophic failure have slowed industrial adoptions of ceramics in environmental applications. This paper will focus on environmental applications of three new advanced ceramic materials that are overcoming these barriers to industrial utilization through improved toughness, reliability, and thermal shock performance. PRD-66, a layered oxide ceramic with outstanding thermal shock resistance and high use temperature with utility in catalyst support, insulation, and hot gas filtration applications, is discussed. Tough silicon carbide fiber reinforced silicon carbide (SiC/SiC) and carbon fiber reinforced silicon carbide (C/SiC) ceramic composites made by chemical vapor infiltration, and silicon carbide particulate reinforced alumina (SiC{sub p}/Al{sub 2}O{sub 3}) composites made through Lanxide Corporation`s DIMOX{trademark} directed metal oxidation process are described. Applications of these materials to pollution reduction and energy efficiency in medical and municipal waste incineration, heat management, aluminum remelting, pyrolysis, coal combustion and gasification, catalytic pollution control, and hot gas filtration, will be discussed.

  20. Implications of Low Particulate Matter Emissions on System Fuel Efficiency for High Efficiency Clean Combustion

    SciTech Connect

    Parks, II, James E; Prikhodko, Vitaly Y

    2009-01-01

    Advanced diesel combustion regimes such as High Efficiency Clean Combustion (HECC) offer the benefits of reduced engine out NOX and particulate matter (PM) emissions. Lower PM emissions during advanced combustion reduce the demand on diesel particulate filters (DPFs) and can, thereby, reduce the fuel penalty associated with DPF regeneration. In this study, a SiC DPF was loaded and regenerated on a 1.7-liter 4-cylinder diesel engine operated in conventional and advanced combustion modes at different speed and load conditions. A diesel oxidation catalyst (DOC) and a lean NOX trap (LNT) were also installed in the exhaust stream. Five steady-state speed and load conditions were weighted to estimate Federal Test Procedure (FTP) fuel efficiency. The DPF was loaded using lean-rich cycling with frequencies that resulted in similar levels of NOX emissions downstream of the LNT. The pressure drop across the DPF was measured at a standard point (1500 rpm, 5.0 bar) before and after loading, and a P rise rate was determined for comparison between conventional and advanced combustion modes. Higher PM emissions in conventional combustion resulted in a higher rate of backpressure rise across the DPF at all of the load points leading to more frequent DPF regenerations and higher fuel penalty. The fuel penalty during conventional combustion was 4.2% compared with 3.1% for a mixture of conventional and advanced modes.

  1. Second generation advanced reburning for high efficiency NO{sub x} control. Progress report No. 2, January 1--March 31, 1996

    SciTech Connect

    Zamansky, V.M.

    1996-04-25

    Existing NO{sub x} control technologies have limitations which may prevent them from successfully achieving commercial, cost effective application in the near future. This project develops a family of novel NO{sub x} control technologies, Second Generation Advanced Reburning (SGAR), which have a potential to achieve 90+% NO{sub x} control at a significantly lower cost than Selective Catalytic Reduction (SCR). Phase I consists of six tasks: Task 1.1, project coordination and reporting deliverables; Task 1.2, kinetics of Na{sub 2}CO{sub 3} reactions with flue gas components; Task 1.3, 0.1 {times} 10{sup 6} Btu/hr optimization studies; Task 1.4, 1.0 {times} 10{sup 6} Btu/hr process development tests; Task 1.5, mechanism development and modeling; and Task 1.6, design methodology and application. This second reporting period included both modeling and experimental activities. Modeling was focused on evaluation of ammonia injection into the reburning zone and on the effect of various additives on promotion of the NO-NH{sub 3} interaction in the reburning zone. First bench scale Controlled Temperature Tower (CTT) experiments have been performed on different variants of the Advanced Returning technology. The tests are continued, and the results will be reduced and reported in the next quarter.

  2. Influence of advancing season on dietary composition, intake, site of digestion, and microbial efficiency in beef steers grazing season-long or twice-over rotation native range pastures in western North Dakota.

    PubMed

    Cline, H J; Neville, B W; Lardy, G P; Caton, J S

    2010-08-01

    Eight ruminally and duodenally cannulated beef steers (374 +/- 11 kg) were used to evaluate effects of advancing season and grazing treatment (season-long; SL or twice-over rotation; TOR) on dietary composition (Exp. 1 and 2), intake, site and extent of digestion, and microbial efficiency (Exp. 2) of native range. In Exp. 1, six 11-d sample collections were conducted from early June to mid-November 2000 and 2001. In vitro OM disappearance decreased (P < or = 0.04) for both years and both treatments with advancing season. Dietary N declined (P < or = 0.07), whereas fiber content increased (P < or = 0.05) during both years in both treatments, with the exception of NDF (P = 0.55) during yr 2 (YR2) on the TOR, as season advanced. In Exp. 2, three 11-d sample collections were conducted from late July to mid-September 2000 on SL and TOR. Organic matter intake (g/kg of BW) was not altered (P = 0.28) by grazing treatments or advancing season. Total tract OM and apparent ruminal OM digestion were not different (P > or = 0.12) between treatment and decreased (P < or = 0.04) with advancing season. Grazing treatment x season interactions (P = 0.06) were present for true ruminal OM digestibility with TOR being greater (P < or = 0.10) than SL in late August and mid-September but not late July. Microbial efficiency was greater (P = 0.07; 15.1 vs. 10.8 +/- 1.6 g of microbial N/kg of OM truly fermented) in SL than TOR, respectively. Degradable intake protein (g/d) was less (P = 0.05) in TOR than SL during late July to early August and not affected by treatment in late August or mid-September. However, undegradable intake protein was unchanged (P > or = 0.54) between treatment and across season. These data suggest that mixed-grass range forage consumed by cattle after late September is deficient in N, particularly degradable intake protein, and that forage intake may be insufficient to support adequate performance in lactating cows independent of grazing management strategies

  3. Energy Conversion Alternatives Study (ECAS), Westinghouse phase 1. Volume 11: Advanced steam systems. [energy conversion efficiency for electric power plants using steam

    NASA Technical Reports Server (NTRS)

    Wolfe, R. W.

    1976-01-01

    A parametric analysis was made of three types of advanced steam power plants that use coal in order to have a comparison of the cost of electricity produced by them a wide range of primary performance variables. Increasing the temperature and pressure of the steam above current industry levels resulted in increased energy costs because the cost of capital increased more than the fuel cost decreased. While the three plant types produced comparable energy cost levels, the pressurized fluidized bed boiler plant produced the lowest energy cost by the small margin of 0.69 mills/MJ (2.5 mills/kWh). It is recommended that this plant be designed in greater detail to determine its cost and performance more accurately than was possible in a broad parametric study and to ascertain problem areas which will require development effort. Also considered are pollution control measures such as scrubbers and separates for particulate emissions from stack gases.

  4. Significantly higher activity of a cytoplasmic hammerhead ribozyme than a corresponding nuclear counterpart: engineered tRNAs with an extended 3′ end can be exported efficiently and specifically to the cytoplasm in mammalian cells

    PubMed Central

    Kuwabara, Tomoko; Warashina, Masaki; Koseki, Shiori; Sano, Masayuki; Ohkawa, Jun; Nakayama, Kazuhisa; Taira, Kazunari

    2001-01-01

    Hammerhead ribozymes were expressed under the control of similar tRNA promoters, localizing transcripts either in the cytoplasm or the nucleus. The tRNAVal-driven ribozyme (tRNA-Rz; tRNA with extra sequences at the 3′ end) that has been used in our ribozyme studies was exported efficiently into the cytoplasm and ribozyme activity was detected only in the cytoplasmic fraction. Both ends of the transported tRNA-Rz were characterized comprehensively and the results confirmed that tRNA-Rz had unprocessed 5′ and 3′ ends. Furthermore, it was also demonstrated that the activity of the exported ribozyme was significantly higher than that of the ribozyme which remained in the nucleus. We suggest that it is possible to engineer tRNA-Rz, which can be exported to the cytoplasm based on an understanding of secondary structures, and then tRNA-driven ribozymes may be co-localized with their target mRNAs in the cytoplasm of mammalian cells. PMID:11433023

  5. Advanced IGCC/Hydrogen Gas Turbine Development

    SciTech Connect

    York, William; Hughes, Michael; Berry, Jonathan; Russell, Tamara; Lau, Y. C.; Liu, Shan; Arnett, Michael; Peck, Arthur; Tralshawala, Nilesh; Weber, Joseph; Benjamin, Marc; Iduate, Michelle; Kittleson, Jacob; Garcia-Crespo, Andres; Delvaux, John; Casanova, Fernando; Lacy, Ben; Brzek, Brian; Wolfe, Chris; Palafox, Pepe; Ding, Ben; Badding, Bruce; McDuffie, Dwayne; Zemsky, Christine

    2015-07-30

    stage hot gas path components, and systems analyses to determine benefits of all previously mentioned technologies to a gas turbine system in an IGCC configuration. This project built on existing gas turbine technology and product developments, and developed and validated the necessary turbine related technologies and sub-systems needed to meet the DOE turbine program goals. The scope of the program did not cover the design and validation of a full-scale prototype machine with the technology advances from this program incorporated. In summary, the DOE goals were met with this program. While the commercial landscape has not resulted in a demand for IGCC gas turbines many of the technologies that were developed over the course of the program are benefiting the US by being applied to new higher efficiency natural gas fueled gas turbines.

  6. Development and testing of a high efficiency advanced coal combustor phase III industrial boiler retrofit. Quarterly technical progress report No. 9, 1 October 1993--31 December 1993

    SciTech Connect

    Jennings, P.; Borio, R.; McGowan, J.G.

    1994-03-01

    This report documents the technical aspects of this project during the ninth quarter of the program. During this quarter, the natural gas baseline testing at the Penn State demonstration boiler was completed, results were analyzed and are presented here. The burner operates in a stable manner over an 8/1 turndown, however due to baghouse temperature limitations (300{degrees}F for acid dewpoint), the burner is not operated for long periods of time below 75% load. Boiler efficiency averaged 83.1% at the 100 percent load rate while increasing to 83.7% at 75% load. NO{sub x} emissions ranged from a low of 0.17 Lbs/MBtu to a high of 0.24 Lbs/MBtu. After the baseline natural gas testing was completed, work continued on hardware optimization and testing with the goal of increasing carbon conversion efficiency on 100% coal firing from {approx}95% to 98%. Several coal handling and feeding problems were encountered during this quarter and no long term testing was conducted. While resolving these problems several shorter term (less than 6 hour) tests were conducted. These included, 100% coal firing tests, 100% natural gas firing tests, testing of air sparges on coal to simulate more primary air and a series of cofiring tests. For 100% coal firing, the carbon conversion efficiency (CCE) obtained this quarter did not exceed the 95-96% barrier previously reached. NO{sub x} emissions on coal only ranged from {approx} 0.42 to {approx} 0.78 Lbs/MBtu. The burner has not been optimized for low NO{sub x} yet, however, due to the short furnace residence time, meeting the goals of 98% CCE and <0.6 Lbs/MBtu NO{sub x} simultaneously will be difficult. Testing on 100% natural gas in the boiler after coal firing indicated no changes in efficiency due to firing in a `dirty` boiler. The co-firing tests showed that increased levels of natural gas firing proportionately decreased NO{sub x}, SO{sub 2}, and CO.

  7. Advanced Natural Gas Reciprocating Engine(s)

    SciTech Connect

    Pike, Edward

    2014-03-31

    The objective of the Cummins ARES program, in partnership with the US Department of Energy (DOE), is to develop advanced natural gas engine technologies that increase engine system efficiency at lower emissions levels while attaining lower cost of ownership. The goals of the project are to demonstrate engine system achieving 50% Brake Thermal Efficiency (BTE) in three phases, 44%, 47% and 50% (starting baseline efficiency at 36% BTE) and 0.1 g/bhp-hr NOx system out emissions (starting baseline NOx emissions at 2 – 4 g/bhp-hr NOx). Primary path towards above goals include high Brake Mean Effective Pressure (BMEP), improved closed cycle efficiency, increased air handling efficiency and optimized engine subsystems. Cummins has successfully demonstrated each of the phases of this program. All targets have been achieved through application of a combined set of advanced base engine technologies and Waste Heat Recovery from Charge Air and Exhaust streams, optimized and validated on the demonstration engine and other large engines. The following architectures were selected for each Phase: Phase 1: Lean Burn Spark Ignited (SI) Key Technologies: High Efficiency Turbocharging, Higher Efficiency Combustion System. In production on the 60/91L engines. Over 500MW of ARES Phase 1 technology has been sold. Phase 2: Lean Burn Technology with Exhaust Waste Heat Recovery (WHR) System Key Technologies: Advanced Ignition System, Combustion Improvement, Integrated Waste Heat Recovery System. Base engine technologies intended for production within 2 to 3 years Phase 3: Lean Burn Technology with Exhaust and Charge Air Waste Heat Recovery System Key Technologies: Lower Friction, New Cylinder Head Designs, Improved Integrated Waste Heat Recovery System. Intended for production within 5 to 6 years Cummins is committed to the launch of next generation of large advanced NG engines based on ARES technology to be commercialized worldwide.

  8. Realization of 13.6% Efficiency on 20 μm Thick Si/Organic Hybrid Heterojunction Solar Cells via Advanced Nanotexturing and Surface Recombination Suppression.

    PubMed

    He, Jian; Gao, Pingqi; Liao, Mingdun; Yang, Xi; Ying, Zhiqin; Zhou, Suqiong; Ye, Jichun; Cui, Yi

    2015-06-23

    Hybrid silicon/polymer solar cells promise to be an economically feasible alternative energy solution for various applications if ultrathin flexible crystalline silicon (c-Si) substrates are used. However, utilization of ultrathin c-Si encounters problems in light harvesting and electronic losses at surfaces, which severely degrade the performance of solar cells. Here, we developed a metal-assisted chemical etching method to deliver front-side surface texturing of hierarchically bowl-like nanopores on 20 μm c-Si, enabling an omnidirectional light harvesting over the entire solar spectrum as well as an enlarged contact area with the polymer. In addition, a back surface field was introduced on the back side of the thin c-Si to minimize the series resistance losses as well as to suppress the surface recombination by the built high-low junction. Through these improvements, a power conversion efficiency (PCE) up to 13.6% was achieved under an air mass 1.5 G irradiation for silicon/organic hybrid solar cells with the c-Si thickness of only about 20 μm. This PCE is as high as the record currently reported in hybrid solar cells constructed from bulk c-Si, suggesting a design rule for efficient silicon/organic solar cells with thinner absorbers.

  9. Virtually simulating the next generation of clean energy technologies: NETL's AVESTAR Center is dedicated to the safe, reliable and efficient operation of advanced energy plants with carbon capture

    SciTech Connect

    Zitney, S.

    2012-01-01

    Imagine using a real-time virtual simulator to learn to fly a space shuttle or rebuild your car's transmission without touching a piece of equipment or getting your hands dirty. Now, apply this concept to learning how to operate and control a state-of-the-art, electricity-producing power plant capable of carbon dioxide (CO{sub 2}) capture. That's what the National Energy Technology Laboratory's (NETL) Advanced Virtual Energy Simulation Training and Research (AVESTAR) Center (www.netl.doe.gov/avestar) is designed to do. Established as part of the Department of Energy's (DOE) initiative to advance new clean energy technology for power generation, the AVESTAR Center focuses primarily on providing simulation-based training for process engineers and energy plant operators, starting with the deployment of a first-of-a-kind operator training simulator for an integrated gasification combined cycle (IGCC) power plant with CO{sub 2} capture. The IGCC dynamic simulator builds on, and reaches beyond, conventional power plant simulators to merge, for the first time, a 'gasification with CO{sub 2} capture' process simulator with a 'combined-cycle' power simulator. Based on Invensys Operations Management's SimSci-Esscor DYNSIM software, the high-fidelity dynamic simulator provides realistic training on IGCC plant operations, including normal and faulted operations, as well as plant start-up, shutdown and power demand load changes. The highly flexible simulator also allows for testing of different types of fuel sources, such as petcoke and biomass, as well as co-firing fuel mixtures. The IGCC dynamic simulator is available at AVESTAR's two locations, NETL (Figure 1) and West Virginia University's National Research Center for Coal and Energy (www.nrcce.wvu.edu), both in Morgantown, W.Va. By offering a comprehensive IGCC training program, AVESTAR aims to develop a workforce well prepared to operate, control and manage commercial-scale gasification-based power plants with CO{sub 2

  10. Second generation advanced reburning for high efficiency NO{sub x} control. Progress report No. 3, April 1--June 30, 1996

    SciTech Connect

    Zamansky, V.M.; Maly, P.M.

    1996-07-26

    This project develops a family of novel NO{sub x} control technologies, Second Generation Advanced Reburning (SGAR), which has the potential to achieve 90+% NO{sub x} control at a significantly lower cost than selective catalytic reduction. Phase I consists of six tasks: Task 1.1, project coordination and reporting deliverables; Task 1.2, kinetics of Na{sub 2}CO{sub 3} reactions with flue gas components; Task 1.3, 20 kW optimization studies; Task 1.4, 20 kW process development tests; Task 1.5, mechanism development and modeling; and Task 1.6, design methodology and application. This third reporting period included both experimental and modeling activities. Tests continued at the Controlled Temperature Tower (CTT), and the results have been reduced and are reported. A study on high- temperature reactions of sodium promoters (Task 1.2) is underway at the University of Texas in Austin (UT). A brief literature review on high-temperature sodium reactions is included in this report. A high- temperature flow system with GC analysis was prepared at the University of Texas at Austin for the experimental program. Modeling focused on description of NO-NH{sub 3} interaction in the burnout zone.

  11. A pilot plant study using conventional and advanced water treatment processes: Evaluating removal efficiency of indicator compounds representative of pharmaceuticals and personal care products.

    PubMed

    Zhang, Shuangyi; Gitungo, Stephen; Axe, Lisa; Dyksen, John E; Raczko, Robert F

    2016-11-15

    With widespread occurrence of pharmaceuticals and personal care products (PPCPs) in the water cycle, their presence in source water has led to the need to better understand their treatability and removal efficiency in treatment processes. Fifteen indicator compounds were identified to represent the large number of PPCPs reported worldwide. Criteria applied to determine the indicator compounds included PPCPs widely used, observed at great frequency in aqueous systems, resistant to treatment, persistent in the environment, and representative of classes of organics. Through a pilot plant investigation to understand the optimal combination of unit process for treating PPCPs, 12 treatment trains with their additive and synergistic contributions were investigated; processes included dissolved air flotation (DAF), pre- and intermediate-ozonation with and without H2O2, intermediate chlorination, dual media filtration, granular activated carbon (GAC), and UV/H2O2. Treatment trains that achieved the greatest removals involved 1. DAF followed by intermediate ozonation, dual media filtration, and virgin GAC; 2. pre-ozonation followed by DAF, dual media filtration, and virgin GAC; and, 3. DAF (with either pre- or intermediate oxidation) followed by dual media filtration and UV/H2O2. Results revealed significant removal efficiencies for virgin GAC (preceded by DAF and intermediate ozonation) and UV/H2O2 with an intensity of 700 mJ/cm(2), where more than 12 of the compounds were removed by greater than 90%. Reduced PPCP removals were observed with virgin GAC preceded by pre-ozonation and DAF. Intermediate ozonation was more effective than using pre-ozonation, demonstrating the importance of this process targeting PPCPs after treatment of natural organic matter. Removal efficiencies of indicator compounds through ozonation were found to be a function of the O3 rate constants (kO3). For compounds with low O3 rate constants (kO3 < 10 M(-1)s(-1)), H2O2 addition in the O3 reactor

  12. MIC-SVM: Designing A Highly Efficient Support Vector Machine For Advanced Modern Multi-Core and Many-Core Architectures

    SciTech Connect

    You, Yang; Song, Shuaiwen; Fu, Haohuan; Marquez, Andres; Mehri Dehanavi, Maryam; Barker, Kevin J.; Cameron, Kirk; Randles, Amanda; Yang, Guangwen

    2014-08-16

    Support Vector Machine (SVM) has been widely used in data-mining and Big Data applications as modern commercial databases start to attach an increasing importance to the analytic capabilities. In recent years, SVM was adapted to the field of High Performance Computing for power/performance prediction, auto-tuning, and runtime scheduling. However, even at the risk of losing prediction accuracy due to insufficient runtime information, researchers can only afford to apply offline model training to avoid significant runtime training overhead. To address the challenges above, we designed and implemented MICSVM, a highly efficient parallel SVM for x86 based multi-core and many core architectures, such as the Intel Ivy Bridge CPUs and Intel Xeon Phi coprocessor (MIC).

  13. One-step synthesis of NiCo2S4 ultrathin nanosheets on conductive substrates as advanced electrodes for high-efficient energy storage

    NASA Astrophysics Data System (ADS)

    Wang, Jian-Gan; Jin, Dandan; Zhou, Rui; Shen, Chao; Xie, Keyu; Wei, Bingqing

    2016-02-01

    A simple one-step and low-temperature synthesis approach has been developed to grow hierarchical NiCo2S4 ultrathin nanosheets (2-3 nm in thickness) on Ni foam. Owing to the unique nanoarchitecture, the NiCo2S4 nanosheets not only offer abundant electro-active sites for energy storage, but also have good electrical and mechanical connections to the conductive Ni foam for enhancing reaction kinetics and improving electrode integrity. When used as anodes for Li-ion batteries, the NiCo2S4 nanosheets demonstrate exceptional energy storage performance in terms of high specific capacity, excellent rate capability, and good cycling stability. The mild-solution synthesis of NiCo2S4 nanostructures and the outstanding electrochemical performance enable the novel electrodes to hold great potential for high-efficient energy storage systems.

  14. Advancing the educational agenda.

    PubMed

    Baker, Cynthia

    2010-12-01

    This timely paper provides a thought-provoking analysis of current advanced practice nursing education in Canada. It comes at a critical juncture in the evolution of Canadian healthcare services and the redefinition of nursing roles. Increasingly, multiple sectors of society are calling for more nurses with advanced practice preparation and for a wider range of advanced practice nursing specialties. Advanced practice nurses (APNs) are being proposed as a solution to a financially overburdened national healthcare system, the increasing complexity of healthcare services, and a crisis in access to primary healthcare. Thus, governments seeking greater fiscal efficiency, medical specialists needing sophisticated collaborative support, and healthcare consumers see APNs as the way forward.

  15. GE power generation technology challenges for advanced gas turbines

    SciTech Connect

    Cook, C.S.; Nourse, J.G.

    1993-11-01

    The GE Utility ATS is a large gas turbine, derived from proven GEPG designs and integrated GEAE technology, that utilizes a new turbine cooling system and incorporates advanced materials. This system has the potential to achieve ATS objectives for a utility sized machine. Combined with use of advanced Thermal Barrier Coatings (TBC`s), the new cooling system will allow higher firing temperatures and improved cycle efficiency that represents a significant improvement over currently available machines. Developing advances in gas turbine efficiency and emissions is an ongoing process at GEPG. The third generation, ``F`` class, of utility gas turbines offers net combined cycle efficiencies in the 55% range, with NO{sub x} programs in place to reduce emissions to less than 10 ppM. The gas turbines have firing temperatures of 2350{degree}F, and pressure ratios of 15 to 1. The turbine components are cooled by air extracted from the cycle at various stages of the compressor. The heat recovery cycle is a three pressure steam system, with reheat. Throttle conditions are nominally 1400 psi and 1000{degree}F reheat. As part of GEPG`s ongoing advanced power generation system development program, it is expected that a gas fired advanced turbine system providing 300 MW power output greater than 58% net efficiency and < 10 ppM NO{sub x} will be defined. The new turbine cooling system developed with technology support from the ATS program will achieve system net efficiency levels in excess of 60%.

  16. Designed synthesis of multi-walled carbon nanotubes@Cu@MoS2 hybrid as advanced electrocatalyst for highly efficient hydrogen evolution reaction

    NASA Astrophysics Data System (ADS)

    Li, Feng; Li, Jing; Lin, Xiaoqing; Li, Xinzhe; Fang, Yiyun; Jiao, Lixin; An, Xincai; Fu, Yan; Jin, Jun; Li, Rong

    2015-12-01

    Design and synthesis of non-precious-metal catalyst for efficient electrochemical transformation of water to molecular hydrogen in acid environments is of paramount importance in reducing energy losses during the water splitting process. Here, the hybrid material of MoS2-coated Cu loaded on the multi-walled carbon nanotubes (MWCNTs@Cu@MoS2) was synthesized using chemical process and hydrothermal method. It was found that the participation of MWCNTs and Cu nanoparticles not only improved the electrical conductivity of the catalyst, but also further enhanced the catalytic activity by synergistic effect with edge-exposed MoS2-coating. Electrochemical experiments demonstrated that the catalyst exhibited excellent hydrogen evolution reaction (HER) activity with large cathode currents (small overpotential of 184 mV for 10 mA cm-2 current density) and a Tafel slope as small as 62 mV per decade. Furthermore, it was discovered that the current density of this composite catalyst had a little decrease after the continual 1000 cycling, which showed the catalyst had a high stability in the recycling process. These findings confirmed that this catalyst was a useful and earth-abundant material for water splitting.

  17. A modified eco-efficiency framework and methodology for advancing the state of practice of sustainability analysis as applied to green infrastructure.

    PubMed

    Ghimire, Santosh R; Johnston, John M

    2017-03-17

    We propose a modified eco-efficiency (EE) framework and novel sustainability analysis methodology for green infrastructure (GI) practices used in water resource management. GI practices such as rainwater harvesting (RWH), rain gardens, porous pavements, and green roofs are emerging as viable strategies for climate change adaptation. The modified framework includes four economic, 11 environmental, and three social indicators. Using six indicators from the framework, at least one from each dimension of sustainability, we demonstrate the methodology to analyze RWH designs. We use life-cycle assessment and life-cycle cost assessment to calculate the sustainability indicators of 20 design configurations as Decision Management Objectives (DMOs). Five DMOs emerged as relatively more sustainable along the EE analysis Tradeoff Line, and we used Data Envelopment Analysis (DEA), a widely applied statistical approach, to quantify the modified EE measures as DMO sustainability scores. We also addressed the subjectivity and sensitivity analysis requirements of sustainability analysis, and we evaluated the performance of 10 weighting schemes that included classical DEA, equal weights, National Institute of Standards and Technology's stakeholder panel, Eco-Indicator 99, Sustainable Society Foundation's Sustainable Society Index, and five derived schemes. We improved upon classical DEA by applying the weighting schemes to identify sustainability scores that ranged from 0.18 to 1.0, avoiding the non-uniqueness problem and revealing the least to most sustainable DMOs. Our methodology provides a more comprehensive view of water resource management and is generally applicable to GI and industrial, environmental, and engineered systems to explore the sustainability space of alternative design configurations. This article is protected by copyright. All rights reserved.

  18. A Synergistic Combination of Advanced Separation and Chemical Scale Inhibitor Technologies for Efficient Use of Imparied Water As Cooling Water in Coal-based Power Plants

    SciTech Connect

    Jasbir Gill

    2010-08-30

    Nalco Company is partnering with Argonne National Laboratory (ANL) in this project to jointly develop advanced scale control technologies that will provide cost-effective solutions for coal-based power plants to operate recirculating cooling water systems at high cycles using impaired waters. The overall approach is to use combinations of novel membrane separations and scale inhibitor technologies that will work synergistically, with membrane separations reducing the scaling potential of the cooling water and scale inhibitors extending the safe operating range of the cooling water system. The project started on March 31, 2006 and ended in August 30, 2010. The project was a multiyear, multi-phase project with laboratory research and development as well as a small pilot-scale field demonstration. In Phase 1 (Technical Targets and Proof of Concept), the objectives were to establish quantitative technical targets and develop calcite and silica scale inhibitor chemistries for high stress conditions. Additional Phase I work included bench-scale testing to determine the feasibility of two membrane separation technologies (electrodialysis ED and electrode-ionization EDI) for scale minimization. In Phase 2 (Technology Development and Integration), the objectives were to develop additional novel scale inhibitor chemistries, develop selected separation processes, and optimize the integration of the technology components at the laboratory scale. Phase 3 (Technology Validation) validated the integrated system's performance with a pilot-scale demonstration. During Phase 1, Initial evaluations of impaired water characteristics focused on produced waters and reclaimed municipal wastewater effluents. Literature and new data were collected and evaluated. Characteristics of produced waters vary significantly from one site to another, whereas reclaimed municipal wastewater effluents have relatively more uniform characteristics. Assessment to date confirmed that calcite and silica

  19. Advanced LIGO

    NASA Astrophysics Data System (ADS)

    LIGO Scientific Collaboration; Aasi, J.; Abbott, B. P.; Abbott, R.; Abbott, T.; Abernathy, M. R.; Ackley, K.; Adams, C.; Adams, T.; Addesso, P.; Adhikari, R. X.; Adya, V.; Affeldt, C.; Aggarwal, N.; Aguiar, O. D.; Ain, A.; Ajith, P.; Alemic, A.; Allen, B.; Amariutei, D.; Anderson, S. B.; Anderson, W. G.; Arai, K.; Araya, M. C.; Arceneaux, C.; Areeda, J. S.; Ashton, G.; Ast, S.; Aston, S. M.; Aufmuth, P.; Aulbert, C.; Aylott, B. E.; Babak, S.; Baker, P. T.; Ballmer, S. W.; Barayoga, J. C.; Barbet, M.; Barclay, S.; Barish, B. C.; Barker, D.; Barr, B.; Barsotti, L.; Bartlett, J.; Barton, M. A.; Bartos, I.; Bassiri, R.; Batch, J. C.; Baune, C.; Behnke, B.; Bell, A. S.; Bell, C.; Benacquista, M.; Bergman, J.; Bergmann, G.; Berry, C. P. L.; Betzwieser, J.; Bhagwat, S.; Bhandare, R.; Bilenko, I. A.; Billingsley, G.; Birch, J.; Biscans, S.; Biwer, C.; Blackburn, J. K.; Blackburn, L.; Blair, C. D.; Blair, D.; Bock, O.; Bodiya, T. P.; Bojtos, P.; Bond, C.; Bork, R.; Born, M.; Bose, Sukanta; Brady, P. R.; Braginsky, V. B.; Brau, J. E.; Bridges, D. O.; Brinkmann, M.; Brooks, A. F.; Brown, D. A.; Brown, D. D.; Brown, N. M.; Buchman, S.; Buikema, A.; Buonanno, A.; Cadonati, L.; Calderón Bustillo, J.; Camp, J. B.; Cannon, K. C.; Cao, J.; Capano, C. D.; Caride, S.; Caudill, S.; Cavaglià, M.; Cepeda, C.; Chakraborty, R.; Chalermsongsak, T.; Chamberlin, S. J.; Chao, S.; Charlton, P.; Chen, Y.; Cho, H. S.; Cho, M.; Chow, J. H.; Christensen, N.; Chu, Q.; Chung, S.; Ciani, G.; Clara, F.; Clark, J. A.; Collette, C.; Cominsky, L.; Constancio, M., Jr.; Cook, D.; Corbitt, T. R.; Cornish, N.; Corsi, A.; Costa, C. A.; Coughlin, M. W.; Countryman, S.; Couvares, P.; Coward, D. M.; Cowart, M. J.; Coyne, D. C.; Coyne, R.; Craig, K.; Creighton, J. D. E.; Creighton, T. D.; Cripe, J.; Crowder, S. G.; Cumming, A.; Cunningham, L.; Cutler, C.; Dahl, K.; Dal Canton, T.; Damjanic, M.; Danilishin, S. L.; Danzmann, K.; Dartez, L.; Dave, I.; Daveloza, H.; Davies, G. S.; Daw, E. J.; DeBra, D.; Del Pozzo, W.; Denker, T.; Dent, T.; Dergachev, V.; DeRosa, R. T.; DeSalvo, R.; Dhurandhar, S.; D´ıaz, M.; Di Palma, I.; Dojcinoski, G.; Dominguez, E.; Donovan, F.; Dooley, K. L.; Doravari, S.; Douglas, R.; Downes, T. P.; Driggers, J. C.; Du, Z.; Dwyer, S.; Eberle, T.; Edo, T.; Edwards, M.; Edwards, M.; Effler, A.; Eggenstein, H.-B.; Ehrens, P.; Eichholz, J.; Eikenberry, S. S.; Essick, R.; Etzel, T.; Evans, M.; Evans, T.; Factourovich, M.; Fairhurst, S.; Fan, X.; Fang, Q.; Farr, B.; Farr, W. M.; Favata, M.; Fays, M.; Fehrmann, H.; Fejer, M. M.; Feldbaum, D.; Ferreira, E. C.; Fisher, R. P.; Frei, Z.; Freise, A.; Frey, R.; Fricke, T. T.; Fritschel, P.; Frolov, V. V.; Fuentes-Tapia, S.; Fulda, P.; Fyffe, M.; Gair, J. R.; Gaonkar, S.; Gehrels, N.; Gergely, L. Á.; Giaime, J. A.; Giardina, K. D.; Gleason, J.; Goetz, E.; Goetz, R.; Gondan, L.; González, G.; Gordon, N.; Gorodetsky, M. L.; Gossan, S.; Goßler, S.; Gräf, C.; Graff, P. B.; Grant, A.; Gras, S.; Gray, C.; Greenhalgh, R. J. S.; Gretarsson, A. M.; Grote, H.; Grunewald, S.; Guido, C. J.; Guo, X.; Gushwa, K.; Gustafson, E. K.; Gustafson, R.; Hacker, J.; Hall, E. D.; Hammond, G.; Hanke, M.; Hanks, J.; Hanna, C.; Hannam, M. D.; Hanson, J.; Hardwick, T.; Harry, G. M.; Harry, I. W.; Hart, M.; Hartman, M. T.; Haster, C.-J.; Haughian, K.; Hee, S.; Heintze, M.; Heinzel, G.; Hendry, M.; Heng, I. S.; Heptonstall, A. W.; Heurs, M.; Hewitson, M.; Hild, S.; Hoak, D.; Hodge, K. A.; Hollitt, S. E.; Holt, K.; Hopkins, P.; Hosken, D. J.; Hough, J.; Houston, E.; Howell, E. J.; Hu, Y. M.; Huerta, E.; Hughey, B.; Husa, S.; Huttner, S. H.; Huynh, M.; Huynh-Dinh, T.; Idrisy, A.; Indik, N.; Ingram, D. R.; Inta, R.; Islas, G.; Isler, J. C.; Isogai, T.; Iyer, B. R.; Izumi, K.; Jacobson, M.; Jang, H.; Jawahar, S.; Ji, Y.; Jiménez-Forteza, F.; Johnson, W. W.; Jones, D. I.; Jones, R.; Ju, L.; Haris, K.; Kalogera, V.; Kandhasamy, S.; Kang, G.; Kanner, J. B.; Katsavounidis, E.; Katzman, W.; Kaufer, H.; Kaufer, S.; Kaur, T.; Kawabe, K.; Kawazoe, F.; Keiser, G. M.; Keitel, D.; Kelley, D. B.; Kells, W.; Keppel, D. G.; Key, J. S.; Khalaidovski, A.; Khalili, F. Y.; Khazanov, E. A.; Kim, C.; Kim, K.; Kim, N. G.; Kim, N.; Kim, Y.-M.; King, E. J.; King, P. J.; Kinzel, D. L.; Kissel, J. S.; Klimenko, S.; Kline, J.; Koehlenbeck, S.; Kokeyama, K.; Kondrashov, V.; Korobko, M.; Korth, W. Z.; Kozak, D. B.; Kringel, V.; Krishnan, B.; Krueger, C.; Kuehn, G.; Kumar, A.; Kumar, P.; Kuo, L.; Landry, M.; Lantz, B.; Larson, S.; Lasky, P. D.; Lazzarini, A.; Lazzaro, C.; Le, J.; Leaci, P.; Leavey, S.; Lebigot, E. O.; Lee, C. H.; Lee, H. K.; Lee, H. M.; Leong, J. R.; Levin, Y.; Levine, B.; Lewis, J.; Li, T. G. F.; Libbrecht, K.; Libson, A.; Lin, A. C.; Littenberg, T. B.; Lockerbie, N. A.; Lockett, V.; Logue, J.; Lombardi, A. L.; Lormand, M.; Lough, J.; Lubinski, M. J.; Lück, H.; Lundgren, A. P.; Lynch, R.; Ma, Y.; Macarthur, J.; MacDonald, T.; Machenschalk, B.; MacInnis, M.; Macleod, D. M.; Magaña-Sandoval, F.; Magee, R.; Mageswaran, M.; Maglione, C.; Mailand, K.; Mandel, I.; Mandic, V.; Mangano, V.; Mansell, G. L.; Márka, S.; Márka, Z.; Markosyan, A.; Maros, E.; Martin, I. W.; Martin, R. M.; Martynov, D.; Marx, J. N.; Mason, K.; Massinger, T. J.; Matichard, F.; Matone, L.; Mavalvala, N.; Mazumder, N.; Mazzolo, G.; McCarthy, R.; McClelland, D. E.; McCormick, S.; McGuire, S. C.; McIntyre, G.; McIver, J.; McLin, K.; McWilliams, S.; Meadors, G. D.; Meinders, M.; Melatos, A.; Mendell, G.; Mercer, R. A.; Meshkov, S.; Messenger, C.; Meyers, P. M.; Miao, H.; Middleton, H.; Mikhailov, E. E.; Miller, A.; Miller, J.; Millhouse, M.; Ming, J.; Mirshekari, S.; Mishra, C.; Mitra, S.; Mitrofanov, V. P.; Mitselmakher, G.; Mittleman, R.; Moe, B.; Mohanty, S. D.; Mohapatra, S. R. P.; Moore, B.; Moraru, D.; Moreno, G.; Morriss, S. R.; Mossavi, K.; Mow-Lowry, C. M.; Mueller, C. L.; Mueller, G.; Mukherjee, S.; Mullavey, A.; Munch, J.; Murphy, D.; Murray, P. G.; Mytidis, A.; Nash, T.; Nayak, R. K.; Necula, V.; Nedkova, K.; Newton, G.; Nguyen, T.; Nielsen, A. B.; Nissanke, S.; Nitz, A. H.; Nolting, D.; Normandin, M. E. N.; Nuttall, L. K.; Ochsner, E.; O'Dell, J.; Oelker, E.; Ogin, G. H.; Oh, J. J.; Oh, S. H.; Ohme, F.; Oppermann, P.; Oram, R.; O'Reilly, B.; Ortega, W.; O'Shaughnessy, R.; Osthelder, C.; Ott, C. D.; Ottaway, D. J.; Ottens, R. S.; Overmier, H.; Owen, B. J.; Padilla, C.; Pai, A.; Pai, S.; Palashov, O.; Pal-Singh, A.; Pan, H.; Pankow, C.; Pannarale, F.; Pant, B. C.; Papa, M. A.; Paris, H.; Patrick, Z.; Pedraza, M.; Pekowsky, L.; Pele, A.; Penn, S.; Perreca, A.; Phelps, M.; Pierro, V.; Pinto, I. M.; Pitkin, M.; Poeld, J.; Post, A.; Poteomkin, A.; Powell, J.; Prasad, J.; Predoi, V.; Premachandra, S.; Prestegard, T.; Price, L. R.; Principe, M.; Privitera, S.; Prix, R.; Prokhorov, L.; Puncken, O.; Pürrer, M.; Qin, J.; Quetschke, V.; Quintero, E.; Quiroga, G.; Quitzow-James, R.; Raab, F. J.; Rabeling, D. S.; Radkins, H.; Raffai, P.; Raja, S.; Rajalakshmi, G.; Rakhmanov, M.; Ramirez, K.; Raymond, V.; Reed, C. M.; Reid, S.; Reitze, D. H.; Reula, O.; Riles, K.; Robertson, N. A.; Robie, R.; Rollins, J. G.; Roma, V.; Romano, J. D.; Romanov, G.; Romie, J. H.; Rowan, S.; Rüdiger, A.; Ryan, K.; Sachdev, S.; Sadecki, T.; Sadeghian, L.; Saleem, M.; Salemi, F.; Sammut, L.; Sandberg, V.; Sanders, J. R.; Sannibale, V.; Santiago-Prieto, I.; Sathyaprakash, B. S.; Saulson, P. R.; Savage, R.; Sawadsky, A.; Scheuer, J.; Schilling, R.; Schmidt, P.; Schnabel, R.; Schofield, R. M. S.; Schreiber, E.; Schuette, D.; Schutz, B. F.; Scott, J.; Scott, S. M.; Sellers, D.; Sengupta, A. S.; Sergeev, A.; Serna, G.; Sevigny, A.; Shaddock, D. A.; Shahriar, M. S.; Shaltev, M.; Shao, Z.; Shapiro, B.; Shawhan, P.; Shoemaker, D. H.; Sidery, T. L.; Siemens, X.; Sigg, D.; Silva, A. D.; Simakov, D.; Singer, A.; Singer, L.; Singh, R.; Sintes, A. M.; Slagmolen, B. J. J.; Smith, J. R.; Smith, M. R.; Smith, R. J. E.; Smith-Lefebvre, N. D.; Son, E. J.; Sorazu, B.; Souradeep, T.; Staley, A.; Stebbins, J.; Steinke, M.; Steinlechner, J.; Steinlechner, S.; Steinmeyer, D.; Stephens, B. C.; Steplewski, S.; Stevenson, S.; Stone, R.; Strain, K. A.; Strigin, S.; Sturani, R.; Stuver, A. L.; Summerscales, T. Z.; Sutton, P. J.; Szczepanczyk, M.; Szeifert, G.; Talukder, D.; Tanner, D. B.; Tápai, M.; Tarabrin, S. P.; Taracchini, A.; Taylor, R.; Tellez, G.; Theeg, T.; Thirugnanasambandam, M. P.; Thomas, M.; Thomas, P.; Thorne, K. A.; Thorne, K. S.; Thrane, E.; Tiwari, V.; Tomlinson, C.; Torres, C. V.; Torrie, C. I.; Traylor, G.; Tse, M.; Tshilumba, D.; Ugolini, D.; Unnikrishnan, C. S.; Urban, A. L.; Usman, S. A.; Vahlbruch, H.; Vajente, G.; Valdes, G.; Vallisneri, M.; van Veggel, A. A.; Vass, S.; Vaulin, R.; Vecchio, A.; Veitch, J.; Veitch, P. J.; Venkateswara, K.; Vincent-Finley, R.; Vitale, S.; Vo, T.; Vorvick, C.; Vousden, W. D.; Vyatchanin, S. P.; Wade, A. R.; Wade, L.; Wade, M.; Walker, M.; Wallace, L.; Walsh, S.; Wang, H.; Wang, M.; Wang, X.; Ward, R. L.; Warner, J.; Was, M.; Weaver, B.; Weinert, M.; Weinstein, A. J.; Weiss, R.; Welborn, T.; Wen, L.; Wessels, P.; Westphal, T.; Wette, K.; Whelan, J. T.; Whitcomb, S. E.; White, D. J.; Whiting, B. F.; Wilkinson, C.; Williams, L.; Williams, R.; Williamson, A. R.; Willis, J. L.; Willke, B.; Wimmer, M.; Winkler, W.; Wipf, C. C.; Wittel, H.; Woan, G.; Worden, J.; Xie, S.; Yablon, J.; Yakushin, I.; Yam, W.; Yamamoto, H.; Yancey, C. C.; Yang, Q.; Zanolin, M.; Zhang, Fan; Zhang, L.; Zhang, M.; Zhang, Y.; Zhao, C.; Zhou, M.; Zhu, X. J.; Zucker, M. E.; Zuraw, S.; Zweizig, J.

    2015-04-01

    The Advanced LIGO gravitational wave detectors are second-generation instruments designed and built for the two LIGO observatories in Hanford, WA and Livingston, LA, USA. The two instruments are identical in design, and are specialized versions of a Michelson interferometer with 4 km long arms. As in Initial LIGO, Fabry-Perot cavities are used in the arms to increase the interaction time with a gravitational wave, and power recycling is used to increase the effective laser power. Signal recycling has been added in Advanced LIGO to improve the frequency response. In the most sensitive frequency region around 100 Hz, the design strain sensitivity is a factor of 10 better than Initial LIGO. In addition, the low frequency end of the sensitivity band is moved from 40 Hz down to 10 Hz. All interferometer components have been replaced with improved technologies to achieve this sensitivity gain. Much better seismic isolation and test mass suspensions are responsible for the gains at lower frequencies. Higher laser power, larger test masses and improved mirror coatings lead to the improved sensitivity at mid and high frequencies. Data collecting runs with these new instruments are planned to begin in mid-2015.

  20. Advanced solar panel designs

    NASA Technical Reports Server (NTRS)

    Ralph, E. L.; Linder, E.

    1995-01-01

    This paper describes solar cell panel designs that utilize new hgih efficiency solar cells along with lightweight rigid panel technology. The resulting designs push the W/kg and W/sq m parameters to new high levels. These new designs are well suited to meet the demand for higher performance small satellites. This paper reports on progress made on two SBIR Phase 1 contracts. One panel design involved the use of large area (5.5 cm x 6.5 cm) GaAs/Ge solar cells of 19% efficiency combined with a lightweight rigid graphite fiber epoxy isogrid substrate configuration. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power level of 60 W/kg with a potential of reaching 80 W/kg. The second panel design involved the use of newly developed high efficiency (22%) dual junction GaInP2/GaAs/Ge solar cells combined with an advanced lightweight rigid substrate using aluminum honeycomb core with high strength graphite fiber mesh facesheets. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power of 105 W/kg and 230 W/sq m. This paper will address the construction details of the panels and an a analysis of the component weights. A strawman array design suitable for a typical small-sat mission is described for each of the two panel design technologies being studied. Benefits in respect to weight reduction, area reduction, and system cost reduction are analyzed and compared to conventional arrays.

  1. Strategy Process in Higher Education

    ERIC Educational Resources Information Center

    Kettunen, Juha

    2010-01-01

    Higher education institutions educate those who are the most talented and best able to secure the future for the next generation. This study examines an efficient strategy process in higher education and emphasises the importance of sufficient dialogue during the process. The study describes the strategy process of the Turku University of Applied…

  2. Cooperative Research and Development of Primary Surface Recuperator for Advanced Microturbine Systems

    SciTech Connect

    Escola, George

    2007-01-17

    Recuperators have been identified as key components of advanced gas turbines systems that achieve a measure of improvement in operating efficiency and lead the field in achieving very low emissions. Every gas turbine manufacturer that is studying, developing, or commercializing advanced recuperated gas turbine cycles requests that recuperators operate at higher temperature without a reduction in design life and must cost less. The Solar Cooperative Research and Development of Primary Surface Recuperator for Advanced Microturbine Systems Program is directed towards meeting the future requirements of advanced gas turbine systems by the following: (1) The development of advanced alloys that will allow recuperator inlet exhaust gas temperatures to increase without significant cost increase. (2) Further characterization of the creep and oxidation (dry and humid air) properties of nickel alloy foils (less than 0.13 mm thick) to allow the economical use of these materials. (3) Increasing the use of advanced robotic systems and advanced in-process statistical measurement systems.

  3. Advanced materials for energy storage.

    PubMed

    Liu, Chang; Li, Feng; Ma, Lai-Peng; Cheng, Hui-Ming

    2010-02-23

    Popularization of portable electronics and electric vehicles worldwide stimulates the development of energy storage devices, such as batteries and supercapacitors, toward higher power density and energy density, which significantly depends upon the advancement of new materials used in these devices. Moreover, energy storage materials play a key role in efficient, clean, and versatile use of energy, and are crucial for the exploitation of renewable energy. Therefore, energy storage materials cover a wide range of materials and have been receiving intensive attention from research and development to industrialization. In this Review, firstly a general introduction is given to several typical energy storage systems, including thermal, mechanical, electromagnetic, hydrogen, and electrochemical energy storage. Then the current status of high-performance hydrogen storage materials for on-board applications and electrochemical energy storage materials for lithium-ion batteries and supercapacitors is introduced in detail. The strategies for developing these advanced energy storage materials, including nanostructuring, nano-/microcombination, hybridization, pore-structure control, configuration design, surface modification, and composition optimization, are discussed. Finally, the future trends and prospects in the development of advanced energy storage materials are highlighted.

  4. Advanced Solar Power Systems

    NASA Technical Reports Server (NTRS)

    Atkinson, J. H.; Hobgood, J. M.

    1984-01-01

    The Advanced Solar Power System (ASPS) concentrator uses a technically sophisticated design and extensive tooling to produce very efficient (80 to 90%) and versatile energy supply equipment which is inexpensive to manufacture and requires little maintenance. The advanced optical design has two 10th order, generalized aspheric surfaces in a Cassegrainian configuration which gives outstanding performance and is relatively insensitive to temperature changes and wind loading. Manufacturing tolerances also have been achieved. The key to the ASPS is the direct absorption of concentrated sunlight in the working fluid by radiative transfers in a black body cavity. The basic ASPS design concepts, efficiency, optical system, and tracking and focusing controls are described.

  5. Alloys for advanced steam turbines--Oxidation behavior

    SciTech Connect

    Holcomb, G.R.

    2007-10-01

    Advanced or ultra supercritical (USC) steam power plants offer the promise of higher efficiencies and lower emissions. Current goals of the U.S. Department of Energy (DOE) include power generation from coal at 60% efficiency, which would require steam temperatures of up to 760°C. Current research on the oxidation of candidate materials for advanced steam turbines is presented with a focus on a methodology for estimating chromium evaporation rates from protective chromia scales. The high velocities and pressures of advanced steam turbines lead to evaporation predictions as high as 5 × 10-8 kg m-2s-1 of CrO2(OH)2(g) at 760°C and 34.5 MPa. This is equivalent to 0.077 mm per year of solid Cr loss.

  6. Light Duty Efficient, Clean Combustion

    SciTech Connect

    Stanton, Donald W.

    2011-06-03

    Cummins has successfully completed the Light Duty Efficient Clean Combustion (LDECC) cooperative program with DoE. This program was established in 2007 in support of the Department of Energy’s Vehicles Technologies Advanced Combustion and Emissions Control initiative to remove critical barriers to the commercialization of advanced, high efficiency, emissions compliant internal combustion (IC) engines for light duty vehicles. Work in this area expanded the fundamental knowledge of engine combustion to new regimes and advanced the knowledge of fuel requirements for these diesel engines to realize their full potential. All of our objectives were met with fuel efficiency improvement targets exceeded.

  7. Advanced Hydrogen Turbine Development

    SciTech Connect

    Joesph Fadok

    2008-01-01

    advanced hydrogen turbine that meets the aggressive targets set forth for the advanced hydrogen turbine, including increased rotor inlet temperature (RIT), lower total cooling and leakage air (TCLA) flow, higher pressure ratio, and higher mass flow through the turbine compared to the baseline. Maintaining efficiency with high mass flow Syngas combustion is achieved using a large high AN2 blade 4, which has been identified as a significant advancement beyond the current state-of-the-art. Preliminary results showed feasibility of a rotor system capable of increased power output and operating conditions above the baseline. In addition, several concepts were developed for casing components to address higher operating conditions. Rare earth modified bond coat for the purpose of reducing oxidation and TBC spallation demonstrated an increase in TBC spallation life of almost 40%. The results from Phase 1 identified two TBC compositions which satisfy the thermal conductivity requirements and have demonstrated phase stability up to temperatures of 1850 C. The potential to join alloys using a bonding process has been demonstrated and initial HVOF spray deposition trials were promising. The qualitative ranking of alloys and coatings in environmental conditions was also performed using isothermal tests where significant variations in alloy degradation were observed as a function of gas composition. Initial basic system configuration schematics and working system descriptions have been produced to define key boundary data and support estimation of costs. Review of existing materials in use for hydrogen transportation show benefits or tradeoffs for materials that could be used in this type of applications. Hydrogen safety will become a larger risk than when using natural gas fuel as the work done to date in other areas has shown direct implications for this type of use. Studies were conducted which showed reduced CO{sub 2} and NOx emissions with increased plant efficiency. An approach to

  8. Advanced Chemical Propulsion Study

    NASA Technical Reports Server (NTRS)

    Woodcock, Gordon; Byers, Dave; Alexander, Leslie A.; Krebsbach, Al

    2004-01-01

    A study was performed of advanced chemical propulsion technology application to space science (Code S) missions. The purpose was to begin the process of selecting chemical propulsion technology advancement activities that would provide greatest benefits to Code S missions. Several missions were selected from Code S planning data, and a range of advanced chemical propulsion options was analyzed to assess capabilities and benefits re these missions. Selected beneficial applications were found for higher-performing bipropellants, gelled propellants, and cryogenic propellants. Technology advancement recommendations included cryocoolers and small turbopump engines for cryogenic propellants; space storable propellants such as LOX-hydrazine; and advanced monopropellants. It was noted that fluorine-bearing oxidizers offer performance gains over more benign oxidizers. Potential benefits were observed for gelled propellants that could be allowed to freeze, then thawed for use.

  9. Realistic Specific Power Expectations for Advanced Radioisotope Power Systems

    NASA Technical Reports Server (NTRS)

    Mason, Lee S.

    2006-01-01

    Radioisotope Power Systems (RPS) are being considered for a wide range of future NASA space science and exploration missions. Generally, RPS offer the advantages of high reliability, long life, and predictable power production regardless of operating environment. Previous RPS, in the form of Radioisotope Thermoelectric Generators (RTG), have been used successfully on many NASA missions including Apollo, Viking, Voyager, and Galileo. NASA is currently evaluating design options for the next generation of RPS. Of particular interest is the use of advanced, higher efficiency power conversion to replace the previous thermoelectric devices. Higher efficiency reduces the quantity of radioisotope fuel and potentially improves the RPS specific power (watts per kilogram). Power conversion options include Segmented Thermoelectric (STE), Stirling, Brayton, and Thermophotovoltaic (TPV). This paper offers an analysis of the advanced 100 watt-class RPS options and provides credible projections for specific power. Based on the analysis presented, RPS specific power values greater than 10 W/kg appear unlikely.

  10. Academic Renewal: Advancing Higher Education toward the Nineties. A Collection of Essays Based upon Presentations at the Conference on Academic Renewal Held at the University of Michigan (Ann Arbor, MI, June 1983).

    ERIC Educational Resources Information Center

    Waggoner, Michael, Ed.; And Others

    New directions for higher education are discussed in 13 essays based on a 1983 conference on academic renewal. Six topics are covered: the challenge of renewal, organizational strategies for renewal, environmental contexts for renewal, curriculum developments, faculty renewal, and academic leadership. Titles and authors include: "Observations…

  11. Advanced Learning Environments.

    ERIC Educational Resources Information Center

    Hubal, Robert C.; Helms, Robert F.; Triplett, Suzanne E.

    Leading-edge technologies, integrated with emerging educational methodologies, make the Advanced Learning Environment (ALE) model cost effective and efficient for learning. The ALE integrates virtual reality and other enabling technologies such as natural language processing, animation, video, courseware, sound, projection, CD-ROM, and distance…

  12. Advanced Reactors Thermal Energy Transport for Process Industries

    SciTech Connect

    P. Sabharwall; S.J. Yoon; M.G. McKellar; C. Stoots; George Griffith

    2014-07-01

    The operation temperature of advanced nuclear reactors is generally higher than commercial light water reactors and thermal energy from advanced nuclear reactor can be used for various purposes such as liquid fuel production, district heating, desalination, hydrogen production, and other process heat applications, etc. Some of the major technology challenges that must be overcome before the advanced reactors could be licensed on the reactor side are qualification of next generation of nuclear fuel, materials that can withstand higher temperature, improvement in power cycle thermal efficiency by going to combined cycles, SCO2 cycles, successful demonstration of advanced compact heat exchangers in the prototypical conditions, and from the process side application the challenge is to transport the thermal energy from the reactor to the process plant with maximum efficiency (i.e., with minimum temperature drop). The main focus of this study is on doing a parametric study of efficient heat transport system, with different coolants (mainly, water, He, and molten salts) to determine maximum possible distance that can be achieved.

  13. Advanced information society(7)

    NASA Astrophysics Data System (ADS)

    Chiba, Toshihiro

    Various threats are hiding in advanced informationalized society. As we see car accident problems in motorization society light aspects necessarily accompy shady ones. Under the changing circumstances of advanced informationalization added values of information has become much higher. It causes computer crime, hacker, computer virus to come to the surface. In addition it can be said that infringement of intellectual property and privacy are threats brought by advanced information. Against these threats legal, institutional and insurance measures have been progressed, and newly security industry has been established. However, they are not adequate individually or totally. The future vision should be clarified, and countermeasures according to the visions have to be considered.

  14. The ADvanced SEParation (ADSEP)

    NASA Technical Reports Server (NTRS)

    1998-01-01

    The ADvanced SEParation (ADSEP) commercial payload is making use of major advances in separation technology: The Phase Partitioning Experiment (PPE); the Micorencapsulation experiment; and the Hemoglobin Separation Experiment (HSE). Using ADSEP, commercial researchers will attempt to determine the partition coefficients for model particles in a two-phase system. With this information, researchers can develop a higher resolution, more effective cell isolation procedure that can be used for many different types of research and for improved health care. The advanced separation technology is already being made available for use in ground-based laboratories.

  15. Materials advances required to reduce energy consumption through the application of heavy duty diesel engines

    SciTech Connect

    Patten, J.W.

    1984-09-01

    Several key materials advances are required to reduce energy consumption through application of heavy duty diesel engines. Heavy duty diesel engines are viewed as effecting energy use both directly through fuel consumption, and indirectly through their durability with large energy expenditures required to replace worn-out engines. Materials advances that would improve fuel consumption include materials related to hot gas-path insulation, and materials related to design advances (other than insulation). Most design advances that are focused on fuel consumption or other performance factors also directly influence durability through materials properties. Several major engine components and many conventional (and advanced) materials are examined. If materials development is integrated with design and manufacturing advances, then fuel economy higher than 0.28 BSFC (50 pct thermal efficiency), and durability beyond 750,000 miles may be achievable.

  16. Energy efficient aircraft engines

    NASA Technical Reports Server (NTRS)

    Chamberlin, R.; Miller, B.

    1979-01-01

    The three engine programs that constitute the propulsion portion of NASA's Aircraft Energy Efficiency Program are described, their status indicated, and anticipated improvements in SFC discussed. The three engine programs are: (1) engine component improvement, directed at current engines, (2) energy efficient engine, directed at new turbofan engines, and (3) advanced turboprops, directed at technology for advanced turboprop-powered aircraft with cruise speeds to Mach 0.8. Unique propulsion system interactive ties to the airframe resulting from engine design features to reduce fuel consumption are discussed. Emphasis is placed on the advanced turboprop since it offers the largest potential fuel savings of the three propulsion programs and also has the strongest interactive ties to the airframe.

  17. Energy efficient aircraft engines

    NASA Technical Reports Server (NTRS)

    Chamberlin, R.; Miller, B.

    1979-01-01

    The three engine programs that constitute the propulsion portion of NASA's Aircraft Energy Efficiency Program are described, their status indicated, and anticipated improvements in SFC discussed. The three engine programs are (1) Engine Component Improvement--directed at current engines, (2) Energy Efficiency Engine directed at new turbofan engines, and (3) Advanced Turboprops--directed at technology for advanced turboprop--powered aircraft with cruise speeds to Mach 0.8. Unique propulsion system interactive ties to the airframe resulting from engine design features to reduce fuel consumption are discussed. Emphasis is placed on the advanced turboprop since it offers the largest potential fuel savings of the three propulsion programs and also has the strongest interactive ties to the airframe.

  18. Problems in Employment Trend of Higher Vocational Graduates and Countermeasures

    ERIC Educational Resources Information Center

    Tan, Jianhua; Sheng, Zhichong

    2011-01-01

    Based on analyzing the regional character of higher vocational graduates employment, this paper analyzes the reasons for this employment trend, advances relevant countermeasures for employment of higher vocational graduates, and explores the direction for higher vocational graduates employment.

  19. Improved Round Trip Efficiency for Regenerative Fuel Cell Systems

    DTIC Science & Technology

    2012-01-15

    vessel was installed into the breadboard test system to be used as a water polishing bed. The reactor media will be replaced with the hydrogen...system was demonstrated at this power output. The first round of bench-top hydrogen recovery reactor media testing was completed. The supplier’s...energy density. In addition, follow-on work is expected to investigate advanced membrane materials that enable higher efficiency electrolysis

  20. Electrofuels: More Efficient Than Photosynthesis

    ScienceCinema

    Toone, Eric; Eggert, Chas; Lynch, Mike; Roberts, Bill

    2016-07-12

    The Advanced Research Projects Agency -- Energy (ARPA-E) has funded successful programs with OPXBIO, NC State and others to create hyper efficient processes for manufacturing biofuels and electrofuels, which can be used in the existing transportation infrastructure.

  1. Electrofuels: More Efficient Than Photosynthesis

    SciTech Connect

    Toone, Eric; Eggert, Chas; Lynch, Mike; Roberts, Bill

    2011-01-01

    The Advanced Research Projects Agency -- Energy (ARPA-E) has funded successful programs with OPXBIO, NC State and others to create hyper efficient processes for manufacturing biofuels and electrofuels, which can be used in the existing transportation infrastructure.

  2. Continued Development of the Advanced Stirling Convertor (ASC)

    NASA Technical Reports Server (NTRS)

    Wong, Wayne A.; Wood, J. Gary; Wilson, Kyle; Buffalino, Andrew; Frye, Patrick; Matejczyk, Dan; Penswick, L.B.

    2008-01-01

    The Advanced Stirling Convertor (ASC) is being developed under contract with the NASA Glenn Research Center (GRC) and is supported by NASA s Science Mission Directorate for potential use in future radioisotope power systems having significantly increased efficiency and higher specific power compared to the current thermoelectric systems. An ASC with a lower temperature (approx.650 C) Inconel heater head is currently being substituted into the DOE/Lockheed Martin Advanced Stirling Radioisotope Generator (ASRG) program with a predicted convertor efficiency of 34 percent (AC electrical out to heat input ) at a temperature ratio of 2.7 and is expected to deliver approximately 75 W(sub ac). Continued development of the higher temperature (approx.850 C) version using existing materials and fabrication techniques in the hot portions is reported on here. The higher temperature ASC is expected to have 38 percent efficiency (AC electrical out to heat input) at a temperature ratio of 3.1 and is expected to deliver approximately 88 W(sub ac). The high temperature ASC also has approximately 30 C higher rejection temperature, which allows for further reduced system mass because of the reduced radiator size. Six higher temperature and hermetically sealed convertors are being built under this effort for extended life testing at GRC.

  3. Large-scale Advanced Propfan (LAP) program

    NASA Technical Reports Server (NTRS)

    Sagerser, D. A.; Ludemann, S. G.

    1985-01-01

    The propfan is an advanced propeller concept which maintains the high efficiencies traditionally associated with conventional propellers at the higher aircraft cruise speeds associated with jet transports. The large-scale advanced propfan (LAP) program extends the research done on 2 ft diameter propfan models to a 9 ft diameter article. The program includes design, fabrication, and testing of both an eight bladed, 9 ft diameter propfan, designated SR-7L, and a 2 ft diameter aeroelastically scaled model, SR-7A. The LAP program is complemented by the propfan test assessment (PTA) program, which takes the large-scale propfan and mates it with a gas generator and gearbox to form a propfan propulsion system and then flight tests this system on the wing of a Gulfstream 2 testbed aircraft.

  4. Advanced turbine systems program

    SciTech Connect

    Wilkes, C.; Mukavetz, D.W.; Knickerbocker, T.K.; Ali, S.A.

    1992-12-31

    In accordance with the goals of the DOE program, improvements in the gas turbine are the primary focus of Allison activity during Phase I. To this end Allison conducted a survey of potentially applicable gas turbine cycles and selected the advanced combined cycle as reference system. Extensive analysis of two versions of the advanced combined cycle was performed against the requirement for a 60% thermal efficiency (LHV) utility-sized, natural gas fired system. This analysis resulted in technology requirements for this system. Additional analysis determined emissions potential for the system, established a coal-fueled derivative system and a commercialization plan. This report deals with the technical requirements for a system that meets the thermal efficiency goal. Allison initially investigated four basic thermodynamic cycles: Humid air turbine, intercalate-recuperated systems, advanced combined cycle, chemically recuperated cycle. Our survey and cycle analysis indicated that au had the potential of reaching 60% thermal efficiency. We also concluded that engine hot section technology would be a critical technology regardless of which cycle was chosen. Based on this result Allison chose to concentrate on the advanced combined cycle. This cycle is well known and understood by the utility turbine user community and is therefore likely to be acceptable to users.

  5. Advanced turbine systems program

    SciTech Connect

    Wilkes, C.; Mukavetz, D.W.; Knickerbocker, T.K.; Ali, S.A.

    1992-01-01

    In accordance with the goals of the DOE program, improvements in the gas turbine are the primary focus of Allison activity during Phase I. To this end Allison conducted a survey of potentially applicable gas turbine cycles and selected the advanced combined cycle as reference system. Extensive analysis of two versions of the advanced combined cycle was performed against the requirement for a 60% thermal efficiency (LHV) utility-sized, natural gas fired system. This analysis resulted in technology requirements for this system. Additional analysis determined emissions potential for the system, established a coal-fueled derivative system and a commercialization plan. This report deals with the technical requirements for a system that meets the thermal efficiency goal. Allison initially investigated four basic thermodynamic cycles: Humid air turbine, intercalate-recuperated systems, advanced combined cycle, chemically recuperated cycle. Our survey and cycle analysis indicated that au had the potential of reaching 60% thermal efficiency. We also concluded that engine hot section technology would be a critical technology regardless of which cycle was chosen. Based on this result Allison chose to concentrate on the advanced combined cycle. This cycle is well known and understood by the utility turbine user community and is therefore likely to be acceptable to users.

  6. Higher level of replication efficiency of 2009 (H1N1) pandemic influenza virus than those of seasonal and avian strains: kinetics from epithelial cell culture and computational modeling.

    PubMed

    Mitchell, Hugh; Levin, Drew; Forrest, Stephanie; Beauchemin, Catherine A A; Tipper, Jennifer; Knight, Jennifer; Donart, Nathaniel; Layton, R Colby; Pyles, John; Gao, Peng; Harrod, Kevin S; Perelson, Alan S; Koster, Frederick

    2011-01-01

    The pathogenicity and transmission of influenza A viruses are likely determined in part by replication efficiency in human cells, which is the net effect of complex virus-host interactions. H5N1 avian, H1N1 seasonal, and H1N1 2009 pandemic influenza virus strains were compared by infecting human differentiated bronchial epithelial cells in air-liquid interface cultures at relatively low virus particle/cell ratios. Differential equation and computational models were used to characterize the in vitro kinetic behaviors of the three strains. The models were calibrated by fitting experimental data in order to estimate difficult-to-measure parameters. Both models found marked differences in the relative values of p, the virion production rate per cell, and R(0), an index of the spread of infection through the monolayer, with the values for the strains in the following rank order (from greatest to least): pandemic strain, followed by seasonal strain, followed by avian strain, as expected. In the differential equation model, which treats virus and cell populations as well mixed, R(0) and p varied proportionately for all 3 strains, consistent with a primary role for productivity. In the spatially explicit computational model, R(0) and p also varied proportionately except that R(0) derived for the pandemic strain was reduced, consistent with constrained viral spread imposed by multiple host defenses, including mucus and paracrine antiviral effects. This synergistic experimental-computational strategy provides relevant parameters for identifying and phenotyping potential pandemic strains.

  7. Advanced Monitoring systems initiative

    SciTech Connect

    R.J. Venedam; E.O. Hohman; C.F. Lohrstorfer; S.J. Weeks; J.B. Jones; W.J. Haas

    2004-09-30

    The Advanced Monitoring Systems Initiative (AMSI) actively searches for promising technologies and aggressively moves them from the research bench into DOE/NNSA end-user applications. There is a large unfulfilled need for an active element that reaches out to identify and recruit emerging sensor technologies into the test and evaluation function. Sensor research is ubiquitous, with the seeds of many novel concepts originating in the university systems, but at present these novel concepts do not move quickly and efficiently into real test environments. AMSI is a widely recognized, self-sustaining ''business'' accelerating the selection, development, testing, evaluation, and deployment of advanced monitoring systems and components.

  8. Advanced gearbox technology

    NASA Technical Reports Server (NTRS)

    Anderson, N. E.; Cedoz, R. W.; Salama, E. E.; Wagner, D. A.

    1987-01-01

    An advanced 13,000 HP, counterrotating (CR) gearbox was designed and successfully tested to provide a technology base for future designs of geared propfan propulsion systems for both commercial and military aircraft. The advanced technology CR gearbox was designed for high efficiency, low weight, long life, and improved maintainability. The differential planetary CR gearbox features double helical gears, double row cylindrical roller bearings integral with planet gears, tapered roller prop support bearings, and a flexible ring gear and diaphragm to provide load sharing. A new Allison propfan back-to-back gearbox test facility was constructed. Extensive rotating and stationary instrumentation was used to measure temperature, strain, vibration, deflection and efficiency under representative flight operating conditions. The tests verified smooth, efficient gearbox operation. The highly-instrumented advanced CR gearbox was successfully tested to design speed and power (13,000 HP), and to a 115 percent overspeed condition. Measured CR gearbox efficiency was 99.3 percent at the design point based on heat loss to the oil. Tests demonstrated low vibration characteristics of double helical gearing, proper gear tooth load sharing, low stress levels, and the high load capacity of the prop tapered roller bearings. Applied external prop loads did not significantly affect gearbox temperature, vibration, or stress levels. Gearbox hardware was in excellent condition after the tests with no indication of distress.

  9. Advanced Science.

    ERIC Educational Resources Information Center

    Coles, Mike; Nelms, Rick

    1996-01-01

    Describes a study that explores the depth and breadth of scientific facts, principles, and procedures which are required in the Advanced General National Vocational Qualifications (GNVQ) science through comparison with GCE Advanced level. The final report takes account of the updated 1996 version of GNVQ science. (DDR)

  10. Navy Enlisted Advancement Planning and the Advancement Interface System (ADIN)

    DTIC Science & Technology

    1987-02-01

    still using 11-month-old data, from October of the previous year. The use of old data resulted in avoidable errors, which were reflected in the...Vacancies are therefore 100 minus 90, or 10. Because there are no higher paygrades, the number of advancements required for E-9 equals the number of...vacancies. The number of personnel who have passed the test (15) exceeds the advancements required (10); so the number of advancements made equals the

  11. Advanced Turbine Systems (ATS) program conceptual design and product development

    SciTech Connect

    1996-08-31

    Achieving the Advanced Turbine Systems (ATS) goals of 60% efficiency, single-digit NO{sub x}, and 10% electric power cost reduction imposes competing characteristics on the gas turbine system. Two basic technical issues arise from this. The turbine inlet temperature of the gas turbine must increase to achieve both efficiency and cost goals. However, higher temperatures move in the direction of increased NO{sub x} emission. Improved coatings and materials technologies along with creative combustor design can result in solutions to achieve the ultimate goal. GE`s view of the market, in conjunction with the industrial and utility objectives, requires the development of Advanced Gas Turbine Systems which encompass two potential products: a new aeroderivative combined-cycle system for the industrial market, and a combined-cycle system for the utility sector that is based on an advanced frame machine. The GE Advanced Gas Turbine Development program is focused on two specific products: (1) a 70 MW class industrial gas turbine based on the GE90 core technology utilizing an innovative air cooling methodology; (2) a 200 MW class utility gas turbine based on an advanced Ge heavy-duty machine utilizing advanced cooling and enhancement in component efficiency. Both of these activities required the identification and resolution of technical issues critical to achieving ATS goals. The emphasis for the industrial ATS was placed upon innovative cycle design and low emission combustion. The emphasis for the utility ATS was placed on developing a technology base for advanced turbine cooling, while utilizing demonstrated and planned improvements in low emission combustion. Significant overlap in the development programs will allow common technologies to be applied to both products. GE Power Systems is solely responsible for offering GE products for the industrial and utility markets.

  12. Metabolic Engineering of Microorganisms for the Production of Higher Alcohols

    PubMed Central

    Choi, Yong Jun; Lee, Joungmin; Jang, Yu-Sin

    2014-01-01

    ABSTRACT Due to the increasing concerns about limited fossil resources and environmental problems, there has been much interest in developing biofuels from renewable biomass. Ethanol is currently used as a major biofuel, as it can be easily produced by existing fermentation technology, but it is not the best biofuel due to its low energy density, high vapor pressure, hygroscopy, and incompatibility with current infrastructure. Higher alcohols, including 1-propanol, 1-butanol, isobutanol, 2-methyl-1-butanol, and 3-methyl-1-butanol, which possess fuel properties more similar to those of petroleum-based fuel, have attracted particular interest as alternatives to ethanol. Since microorganisms isolated from nature do not allow production of these alcohols at high enough efficiencies, metabolic engineering has been employed to enhance their production. Here, we review recent advances in metabolic engineering of microorganisms for the production of higher alcohols. PMID:25182323

  13. Metabolic engineering of microorganisms for the production of higher alcohols.

    PubMed

    Choi, Yong Jun; Lee, Joungmin; Jang, Yu-Sin; Lee, Sang Yup

    2014-09-02

    Due to the increasing concerns about limited fossil resources and environmental problems, there has been much interest in developing biofuels from renewable biomass. Ethanol is currently used as a major biofuel, as it can be easily produced by existing fermentation technology, but it is not the best biofuel due to its low energy density, high vapor pressure, hygroscopy, and incompatibility with current infrastructure. Higher alcohols, including 1-propanol, 1-butanol, isobutanol, 2-methyl-1-butanol, and 3-methyl-1-butanol, which possess fuel properties more similar to those of petroleum-based fuel, have attracted particular interest as alternatives to ethanol. Since microorganisms isolated from nature do not allow production of these alcohols at high enough efficiencies, metabolic engineering has been employed to enhance their production. Here, we review recent advances in metabolic engineering of microorganisms for the production of higher alcohols.

  14. Advancing Student Achievement

    ERIC Educational Resources Information Center

    Walberg, Herbert J.

    2010-01-01

    For the last half century, higher spending and many modern reforms have failed to raise the achievement of students in the United States to the levels of other economically advanced countries. A possible explanation, says Herbert Walberg, is that much current education theory is ill informed about scientific psychology, often drawing on fads and…

  15. The carbon fertilization effect over a century of anthropogenic CO2 emissions: higher intracellular CO2 and more drought resistance among invasive and native grass species contrasts with increased water use efficiency for woody plants in the US Southwest.

    PubMed

    Drake, Brandon L; Hanson, David T; Lowrey, Timothy K; Sharp, Zachary D

    2017-02-01

    From 1890 to 2015, anthropogenic carbon dioxide emissions have increased atmospheric CO2 concentrations from 270 to 400 mol mol(-1) . The effect of increased carbon emissions on plant growth and reproduction has been the subject of study of free-air CO2 enrichment (FACE) experiments. These experiments have found (i) an increase in internal CO2 partial pressure (ci ) alongside acclimation of photosynthetic capacity, (ii) variable decreases in stomatal conductance, and (iii) that increases in yield do not increase commensurate with CO2 concentrations. Our data set, which includes a 115-year-long selection of grasses collected in New Mexico since 1892, is consistent with an increased ci as a response to historical CO2 increase in the atmosphere, with invasive species showing the largest increase. Comparison with Palmer Drought Sensitivity Index (PDSI) for New Mexico indicates a moderate correlation with Δ(13) C (r(2)  = 0.32, P < 0.01) before 1950, with no correlation (r(2)  = 0.00, P = 0.91) after 1950. These results indicate that increased ci may have conferred some drought resistance to these grasses through increased availability of CO2 in the event of reduced stomatal conductance in response to short-term water shortage. Comparison with C3 trees from arid environments (Pinus longaeva and Pinus edulis in the US Southwest) as well as from wetter environments (Bromus and Poa grasses in New Mexico) suggests differing responses based on environment; arid environments in New Mexico see increased intrinsic water use efficiency (WUE) in response to historic elevated CO2 while wetter environments see increased ci . This study suggests that (i) the observed increases in ci in FACE experiments are consistent with historical CO2 increases and (ii) the CO2 increase influences plant sensitivity to water shortage, through either increased WUE or ci in arid and wet environments, respectively.

  16. Arrays of ZnO/AZO (Al-doped ZnO) nanocables: a higher open circuit voltage and remarkable improvement of efficiency for CdS-sensitized solar cells.

    PubMed

    Deng, Jianping; Wang, Minqiang; Liu, Jing; Song, Xiaohui; Yang, Zhi

    2014-03-15

    Photoelectrode of nanocables (NCs) structure of ZnO nanowires (NWs) coated with Al-doped ZnO (AZO) shells was investigated for CdS quantum dots sensitized solar cells (QDSSCs). ZnO NWs serve as the frame for the preparation of AZO shells, in which electron transport more rapidly due to the more higher electron mobility of AZO (n-ZnO) than that of i-ZnO. AZO shells were assembled onto the surface of ZnO NWs via a spin-coating method. Optical band-gap of the ZnO/AZO films varies from 3.19 eV for pure ZnO to 3.25 eV for AZO (15%) depending on the Al-doping concentration. The PL intensity of AZO/ZnO, V(oc), J(sc) and η of the cells first increased and then decreased with the increase in the Al-doping (from 0% to 20%) and post-annealed temperature. Remarkably, the value of V(oc) can achieve above 0.8 V after Al-doping. The dark current and absorption spectrum provided direct evidence of the increase in J(sc) and V(oc), respectively. Moreover, we discussed the effect of Al-doping on optical band-gap of the samples and the transfer of electron.

  17. Making Knowledge Services Work in Higher Education

    ERIC Educational Resources Information Center

    Norris, Donald M.; Lefrere, Paul; Mason, Jon

    2006-01-01

    Over the past three years, knowledge-based practices in higher education have advanced, driving the development of low/no-cost, mass-market tools for knowledge sharing and reducing some barriers to change. New investors in higher education are developing strategies to exploit the knowledge-driven value propositions. Existing institutions, anxious…

  18. Higher Education, Meritocracy and Distributive Justice.

    ERIC Educational Resources Information Center

    Giarelli, James M.; Webb, Rodman B.

    1980-01-01

    Traces the aims of American higher education from colonial Limes to the 20th century, with emphasis on the differences between the realities of higher education and the "rhetoric" or stated aims. Concludes that the recent emphasis on equality of educational opportunity represents a break with traditional educational principles and an advance in…

  19. Higher Education and the State in Cuba.

    ERIC Educational Resources Information Center

    Paulston, Rolland G.

    How and why the expansion and reorientation in Cuban higher education has taken place is noted, and continuing problems and emerging trends are assessed. Few developing countries can match Cuban achievements in higher education, which has advanced to levels characteristic of developed societies. Ideological orientations of historical trends are…

  20. Whither the Study of Higher Education?

    ERIC Educational Resources Information Center

    Williams, Don

    1984-01-01

    The idea that people committing themselves to lifetime careers in academe should take some coursework in higher education retains its appeal; but that appeal has rarely grown so strong as to cause courses in higher education to become part of the graduation requirement for advanced degrees. (MLW)

  1. Mechanical advances in cardiopulmonary resuscitation.

    PubMed

    Lurie, K; Plaisance, P; Sukhum, P; Soleil, C

    2001-06-01

    Challenged by the continued high mortality rates for patients in cardiac arrest, the American Heart Association and the European Resuscitation Council developed a new set of guidelines in 2000 to help advance several new and promising cardiopulmonary resuscitation (CPR) techniques and devices. This is the first time these organizations have taken such a bold move, in part because of the poor results with standard closed-chest cardiac massage. The new techniques, interposed abdominal counterpulsation and active compression decompression CPR, each provide greater blood flow to the vital organs in animal models of CPR and lead to higher blood pressures in patients in cardiac arrest. In some clinical studies, both techniques have resulted in a significant increase in survival after cardiac arrest in comparison with standard CPR. Three of the four new CPR devices that were recommended in the new guidelines also provide superior vital organ blood flow and increased blood pressures in comparison with standard CPR. The three devices that improve the efficiency of CPR are the circumferential vest, an active compression decompression CPR device, and an inspiratory impedance valve used in combination with the active compression decompression CPR device. The fourth device type, one that compresses the thorax using an automated mechanical piston compression mechanism, was recommended to reduce the number of personnel required to perform CPR. However, no studies on the automated mechanical compression devices have showed an improvement in hemodynamic variables or survival in comparison with standard CPR. Taken together, these new technologies represent an important step forward in the evolution of CPR from a pair of hands to devices designed to enhance CPR efficiency. Each of these advances is described, and the recent literature about each of them is reviewed.

  2. Black Holes in Higher Dimensions

    NASA Astrophysics Data System (ADS)

    Horowitz, Gary T.

    2012-04-01

    List of contributors; Preface; Part I. Introduction: 1. Black holes in four dimensions Gary Horowitz; Part II. Five Dimensional Kaluza-Klein Theory: 2. The Gregory-Laflamme instability Ruth Gregory; 3. Final state of Gregory-Laflamme instability Luis Lehner and Frans Pretorius; 4. General black holes in Kaluza-Klein theory Gary Horowitz and Toby Wiseman; Part III. Higher Dimensional Solutions: 5. Myers-Perry black holes Rob Myers; 6. Black rings Roberto Emparan and Harvey Reall; Part IV. General Properties: 7. Constraints on the topology of higher dimensional black holes Greg Galloway; 8. Blackfolds Roberto Emparan; 9. Algebraically special solutions in higher dimensions Harvey Reall; 10. Numerical construction of static and stationary black holes Toby Wiseman; Part V. Advanced Topics: 11. Black holes and branes in supergravity Don Marolf; 12. The gauge/gravity duality Juan Maldacena; 13. The fluid/gravity correspondence Veronika Hubeny, Mukund Rangamani and Shiraz Minwalla; 14. Horizons, holography and condensed matter Sean Hartnoll; Index.

  3. Advanced Controller for the Free-Piston Stirling Convertor

    NASA Technical Reports Server (NTRS)

    Gerber, Scott S.; Jamison, Mike; Roth, Mary Ellen; Regan, Timothy F.

    2004-01-01

    The free-piston Stirling power convertor is being considered as an advanced power conversion technology to be used for future NASA deep space missions requiring long life radioisotope power systems. This technology has a conversion efficiency of over 25%, which is significantly higher than the efficiency of the Radioisotope Thermal-electric Generators (RTG) now in use. The NASA Glenn Research Center has long been recognized as a leader in Stirling technology and is responsible for the development of advanced technologies that are intended to significantly improve key characteristics of the Stirling convertor. The advanced technologies identified for development also consider the requirements of potential future missions and the new capabilities that have become available in the associated technical areas. One of the key areas identified for technology development is the engine controller. To support this activity, an advanced controller is being developed for the Stirling power convertor. This controller utilizes active power factor correction electronics and microcontroller-based controls. The object of this paper is to present an overview of the advanced controller concept with modeling, simulation and hardware test data.

  4. High Temperature Solid Lubricant Materials for Heavy Duty and Advanced Heat Engines

    NASA Technical Reports Server (NTRS)

    Dellacorte, C.; Wood, J. C.

    1994-01-01

    Advanced engine designs incorporate higher mechanical and thermal loading to achieve efficiency improvements. This approach often leads to higher operating temperatures of critical sliding elements (e.g. piston ring/cylinder wall contacts and valve guides) which compromise the use of conventional and even advanced synthetic liquid lubricants. For these applications solid lubricants must be considered. Several novel solid lubricant composites and coatings designated PS/PM200 have been employed to dry and marginally oil lubricated contacts in advanced heat engines. These applications include cylinder kits of heavy duty diesels, and high temperature Stirling engines, sidewall seals of rotary engines, and various exhaust valve and exhaust component applications. This paper describes the tribological and thermophysical properties of these tribomaterials and reviews the results of applying them to engine applications. Other potential tribological materials and applications are also discussed with particular emphasis on heavy duty and advanced heat engines.

  5. Advanced transmission studies

    NASA Technical Reports Server (NTRS)

    Coy, John J.; Bill, Robert C.

    1988-01-01

    The NASA Lewis Research Center and the U.S. Army Aviation Systems Command share an interest in advancing the technology for helicopter propulsion systems. In particular, this paper presents highlights from that portion of the program in drive train technology and the related mechanical components. The major goals of the program are to increase the life, reliability, and maintainability; reduce the weight, noise, and vibration; and maintain the relatively high mechanical efficiency of the gear train. The current activity emphasizes noise reduction technology and analytical code development followed by experimental verification. Selected significant advances in technology for transmissions are reviewed, including advanced configurations and new analytical tools. Finally, the plan for future transmission research is presented.

  6. Advanced Hydrogen Turbine Development

    SciTech Connect

    Marra, John

    2015-09-30

    Under the sponsorship of the U.S. Department of Energy (DOE) National Energy Technology Laboratories, Siemens has completed the Advanced Hydrogen Turbine Development Program to develop an advanced gas turbine for incorporation into future coal-based Integrated Gasification Combined Cycle (IGCC) plants. All the scheduled DOE Milestones were completed and significant technical progress was made in the development of new technologies and concepts. Advanced computer simulations and modeling, as well as subscale, full scale laboratory, rig and engine testing were utilized to evaluate and select concepts for further development. Program Requirements of: A 3 to 5 percentage point improvement in overall plant combined cycle efficiency when compared to the reference baseline plant; 20 to 30 percent reduction in overall plant capital cost when compared to the reference baseline plant; and NOx emissions of 2 PPM out of the stack. were all met. The program was completed on schedule and within the allotted budget

  7. The Public Stake in Independent Higher Education.

    ERIC Educational Resources Information Center

    Olson, Lawrence

    The importance of higher education in providing the skilled labor force needed to respond to changing technologies; the cost-efficiency of independent higher education; and implications for government, industry, and independent higher education are considered. The most readily changing technologies include computers and electronics, satellite…

  8. Advanced-performance macroparticle accelerators - Polyphase railguns

    NASA Astrophysics Data System (ADS)

    Driga, M. D.

    1993-01-01

    The initial naive design of railguns has the drawback of a geometric mismatch between the two-rail system used in such accelerators and a round-bore barrel stressed nonuniformly. The most important drawback however, is the reliance on direct current arcs drastically limiting the performance and life span of the launchers. We attempt to advance the concept of polyphase ac railguns in which multirail systems achieve a more uniform stress distribution within the barrel and in which the frequent passing of currents through zero (each half of the cycle) creates conditions for very low erosion and diminishes other unwanted effects. Such polyphase, ac, electromagnetic rail accelerators hold the promise of higher velocities, higher efficiency, and durability.

  9. Advanced Microsensors

    NASA Technical Reports Server (NTRS)

    1991-01-01

    This video looks at a spinoff application of the technology from advanced microsensors -- those that monitor and determine conditions of spacecraft like the Space Shuttle. The application featured is concerned with the monitoring of the health of premature babies.

  10. Quasi suppression of higher-order diffractions with inclined rectangular apertures gratings

    NASA Astrophysics Data System (ADS)

    Liu, Yuwei; Zhu, Xiaoli; Gao, Yulin; Zhang, Wenhai; Fan, Quanping; Wei, Lai; Yang, Zuhua; Zhang, Qiangqiang; Qian, Feng; Chen, Yong; He, Weihua; Wu, Yinzhong; Yan, Zhuoyang; Hua, Yilei; Zhao, Yidong; Cui, Mingqi; Qiu, Rong; Zhou, Weimin; Gu, Yuqiu; Zhang, Baohan; Xie, Changqing; Cao, Leifeng

    2015-11-01

    Advances in the fundamentals and applications of diffraction gratings have received much attention. However, conventional diffraction gratings often suffer from higher-order diffraction contamination. Here, we introduce a simple and compact single optical element, named inclined rectangular aperture gratings (IRAG), for quasi suppression of higher-order diffractions. We show, both in the visible light and soft x-ray regions, that IRAG can significantly suppress higher-order diffractions with moderate diffraction efficiency. Especially, as no support strut is needed to maintain the free-standing patterns, the IRAG is highly advantageous to the extreme-ultraviolet and soft x-ray regions. The diffraction efficiency of the IRAG and the influences of fabrication constraints are also discussed. The unique quasi-single order diffraction properties of IRAG may open the door to a wide range of photonic applications.

  11. Quasi suppression of higher-order diffractions with inclined rectangular apertures gratings

    PubMed Central

    Liu, Yuwei; Zhu, Xiaoli; Gao, Yulin; Zhang, Wenhai; Fan, Quanping; Wei, Lai; Yang, Zuhua; Zhang, Qiangqiang; Qian, Feng; Chen, Yong; He, Weihua; Wu, Yinzhong; Yan, Zhuoyang; Hua, Yilei; Zhao, Yidong; Cui, Mingqi; Qiu, Rong; Zhou, Weimin; Gu, Yuqiu; Zhang, Baohan; Xie, Changqing; Cao, Leifeng

    2015-01-01

    Advances in the fundamentals and applications of diffraction gratings have received much attention. However, conventional diffraction gratings often suffer from higher-order diffraction contamination. Here, we introduce a simple and compact single optical element, named inclined rectangular aperture gratings (IRAG), for quasi suppression of higher-order diffractions. We show, both in the visible light and soft x-ray regions, that IRAG can significantly suppress higher-order diffractions with moderate diffraction efficiency. Especially, as no support strut is needed to maintain the free-standing patterns, the IRAG is highly advantageous to the extreme-ultraviolet and soft x-ray regions. The diffraction efficiency of the IRAG and the influences of fabrication constraints are also discussed. The unique quasi-single order diffraction properties of IRAG may open the door to a wide range of photonic applications. PMID:26563588

  12. Mutual physiological genetic mechanism of plant high water use efficiency and nutrition use efficiency.

    PubMed

    Cao, Hong-Xing; Zhang, Zheng-Bin; Xu, Ping; Chu, Li-Ye; Shao, Hong-Bo; Lu, Zhao-Hua; Liu, Jun-Hong

    2007-05-15

    Water deficiency and lower fertilizer utilization efficiency are major constraints of productivity and yield stability. Improvements of crop water use efficiency (WUE) and nutrient use efficiency (NUE) is becoming an important objective in crop breeding. With the introduction of new physiological and biological approaches, we can better understand the mutual genetics mechanism of high use efficiency of water and nutrient. Much work has been done in past decades mainly including the interactions between different fertilizers and water influences on root characteristics and crop growth. Fertilizer quantity and form were regulated in order to improve crop WUE. The crop WUE and NUE shared the same increment tendency during evolution process; some genes associated with WUE and NUE have been precisely located and marked on the same chromosomes, some genes related to WUE and NUE have been cloned and transferred into wheat and rice and other plants, they can enhance water and nutrient use efficiency. The proteins transporting nutrient and water were identified such as some water channel proteins. The advance on the mechanism of higher water and nutrient use efficiency in crop was reviewed in this article, and it could provide some useful information for further research on WUE and NUE in crop.

  13. Renewal of the Advanced Photon Source.

    SciTech Connect

    Gibson, J. M.

    2008-12-31

    To ensure that state-of-the-art hard x-ray tools are available for US scientists and engineers who are solving key problems in energy, environment, technology development and human health, the nation's unique high-energy x-ray source needs a major renewal of its capabilities. The Advanced Photon Source renewal program responds to key scientific needs driven by our user community. The renewal encompasses many innovations in beamlines and accelerator capabilities, each of which will transform our tools and allow new problems to be solved. In particular the APS renewal dramatically expands two compelling avenues for research. Through x-ray imaging, we can illuminate complex hierarchical structures from the molecular level to the macroscopic level, and study how they change in time and in response to stimuli. Images will facilitate understanding how proteins fit together to make living organisms, contribute to development of lighter, higher-strength alloys for fuel-efficient transportation and advance the use of biomass for alternative fuels. Hard x-rays are also especially suited to the study of real materials, under realistic conditions and in real-time. The advances proposed in this area would help develop more efficient catalysts, enhance green manufacturing, point the way to artificial light-harvesting inspired by biology and help us develop more efficient lighting. The scope of the renewal of our {approx}$1.5B facility is estimated to be {approx}$350M over five years. It is vital that the investment begin as soon as possible. The renewed APS would complement other national investments such as the National Synchrotron Light Source-II and would keep the U.S. internationally competitive.

  14. EDITORIAL: Deeper, broader, higher, better?

    NASA Astrophysics Data System (ADS)

    Dobson, Ken

    1998-07-01

    Honorary Editor The standard of educational achievement in England and Wales is frequently criticized, and it seems to be an axiom of government that schools and teachers need to be shaken up, kept on a tight rein, copiously inspected, shamed and blamed as required: in general, subjected to the good old approach of: ' Find out what Johnny is doing and tell him to stop.' About the only exception to this somewhat severe attitude is at A-level, where the standard is simply golden. Often, comparisons are made between the performance of, say, English children and that of their coevals in other countries, with different customs, systems, aims and languages. But there has been a recent comparison of standards at A-level with a non-A-level system of pre-university education, in an English-speaking country that both sends students to English universities and accepts theirs into its own, and is, indeed, represented in the UK government at well above the level expected from its ethnical weighting in the population. This semi-foreign country is Scotland. The conclusions of the study are interesting. Scotland has had its own educational system, with `traditional breadth', and managed to escape much of the centralized authoritarianism that we have been through south of the border. It is interesting to note that, while for the past dozen years or so the trend in A-level Physics entries has been downwards, there has been an increase in the take-up of Scottish `Highers'. Highers is a one-year course. Is its popularity due to its being easier than A-level? Scottish students keen enough to do more can move on to the Certificate of Sixth Year Studies, and will shortly be able to upgrade a Higher Level into an Advanced Higher Level. A comparability study [ Comparability Study of Scottish Qualifications and GCE Advanced Levels: Report on Physics January 1998 (free from SQA)] was carried out by the Scottish Qualifications Authority (SQA) with the aim (amongst others) of helping

  15. Advanced Electrophysiologic Mapping Systems

    PubMed Central

    2006-01-01

    Executive Summary Objective To assess the effectiveness, cost-effectiveness, and demand in Ontario for catheter ablation of complex arrhythmias guided by advanced nonfluoroscopy mapping systems. Particular attention was paid to ablation for atrial fibrillation (AF). Clinical Need Tachycardia Tachycardia refers to a diverse group of arrhythmias characterized by heart rates that are greater than 100 beats per minute. It results from abnormal firing of electrical impulses from heart tissues or abnormal electrical pathways in the heart because of scars. Tachycardia may be asymptomatic, or it may adversely affect quality of life owing to symptoms such as palpitations, headaches, shortness of breath, weakness, dizziness, and syncope. Atrial fibrillation, the most common sustained arrhythmia, affects about 99,000 people in Ontario. It is associated with higher morbidity and mortality because of increased risk of stroke, embolism, and congestive heart failure. In atrial fibrillation, most of the abnormal arrhythmogenic foci are located inside the pulmonary veins, although the atrium may also be responsible for triggering or perpetuating atrial fibrillation. Ventricular tachycardia, often found in patients with ischemic heart disease and a history of myocardial infarction, is often life-threatening; it accounts for about 50% of sudden deaths. Treatment of Tachycardia The first line of treatment for tachycardia is antiarrhythmic drugs; for atrial fibrillation, anticoagulation drugs are also used to prevent stroke. For patients refractory to or unable to tolerate antiarrhythmic drugs, ablation of the arrhythmogenic heart tissues is the only option. Surgical ablation such as the Cox-Maze procedure is more invasive. Catheter ablation, involving the delivery of energy (most commonly radiofrequency) via a percutaneous catheter system guided by X-ray fluoroscopy, has been used in place of surgical ablation for many patients. However, this conventional approach in catheter ablation

  16. [Effect of angiotensin II receptor antagonist (losartan) on renal function, serum potassium and blood pressure in patients with advanced renal failure: differences between patients with a serum creatinine (SCr) level higher than 3 mg/dl and those with a lower SCr level].

    PubMed

    Nakayama, Masaaki; Tanno, Yudo; Otsuka, Yasushi; Takahashi, Hajime; Ikeda, Masato; Katoh, Naohiko; Yokoyama, Keitaro; Yamamoto, Hiroyasu; Tokutome, Goro; Hosoya, Tatsuo

    2002-10-01

    The administration of angiotensin II receptor antagonist(AIIA) to patients with advanced chronic renal failure(CRF) is not actively recommended. This study was performed to verify the appropriateness of this situation and to determine if there are any substantial differences between patients with a serum creatinine(SCr) level higher than 3 mg/dl and those with a lower SCr level in terms of the clinical effects such as renal function, serum potassium level and systemic blood pressure(BP) after the administration of AIIA. Sixteen patients with advanced CRF who were admitted to the out-patient clinic in Jikei University Hospital(1998/1-1999/12) were enrolled(average age: 65 years, underlying renal disease: diabetic nephropathy 6, CGN 5, and other 1). They had never been administered AIIA before. The patients were classified into two groups in accordance with their level of SCr: group A(SCr lower than 3.0 mg/dl; n = 11), and Group B(SCr higher than 3.0 mg/dl; n = 5). Losartan(50 mg/day) administration was started in order to examine parameters such as the SCr, potassium, BP at the out-patient clinic, and urinary protein excretion at the 0, 1, 3, 6, 9, and 12 month time points. Although the 1/SCr values provided negative slopes with time in both groups, no significant difference was found between the two slopes. There were no changes in the serum potassium levels or urinary protein excretion during the study period in either group, and no statistical difference was found between the two groups. Although the serum potassium level exceeded 5.5 mEq/l in two patients each in both groups, the level was controlled by diet therapy with restricted potassium. BP was reduced significantly in both groups during the study period, and no statistical difference in BP reduction was observed between the two groups. In conclusion, the results indicate there were no differences in the effect on renal function, serum potassium levels or systemic BP between the patients with a SCr level

  17. A Conceptual Titan Orbiter Mission Using Advanced Radioisotope Power Systems

    NASA Technical Reports Server (NTRS)

    Abelson, Robert D.; Shirley, James H.; Spilker, Thomas R.

    2006-01-01

    This study details a conceptual follow-on Titan orbiter mission that would provide full global topographic coverage. surface imaging, and meteorological characterization of the atmosphere over a nominal 5-year science mission duration. The baseline power requirement is approx.1 kWe at EOM and is driven by a high power radar instrument that would provide 3-dimensional measurements of atmospheric clouds, precipitation, and surface topography. While this power level is moderately higher than that of the Cassini spacecraft. higher efficiency advanced RPSs could potentially reduce the plutonium usage to less than 1/3rd of that used on the Cassini spacecraft. The Titan Orbiter mission is assumed to launch in 2015. It would utilize advanced RPSs to provide all on-board power.

  18. Higher Education Exchange, 2012

    ERIC Educational Resources Information Center

    Brown, David W., Ed.; Witte, Deborah, Ed.

    2012-01-01

    "Higher Education Exchange" publishes case studies, analyses, news, and ideas about efforts within higher education to develop more democratic societies. Contributors to this issue of the "Higher Education Exchange" examine whether institutions of higher learning are doing anything to increase the capacity of citizens to shape…

  19. Higher Education Exchange, 2004

    ERIC Educational Resources Information Center

    Brown, David W., Ed; Witte, Deborah, Ed.

    2004-01-01

    The Higher Education Exchange is part of a movement to strengthen higher education's democratic mission and foster a more democratic culture throughout American society. Working in this tradition, the Higher Education Exchange publishes case studies, analyses, news, and ideas about efforts within higher education to develop more democratic…

  20. Higher Education Exchange, 2014

    ERIC Educational Resources Information Center

    Brown, David W., Ed.; Witte, Deborah, Ed.

    2014-01-01

    Research shows that not only does higher education not see the public; when the public, in turn, looks at higher education, it sees mostly malaise, inefficiencies, expense, and unfulfilled promises. Yet, the contributors to this issue of the "Higher Education Exchange" tell of bright spots in higher education where experiments in working…

  1. Higher Education Exchange, 2011

    ERIC Educational Resources Information Center

    Brown, David W., Ed.; Witte, Deborah, Ed.

    2011-01-01

    "Higher Education Exchange" publishes case studies, analyses, news, and ideas about efforts within higher education to develop more democratic societies. Contributors to this issue of the "Higher Education Exchange" examine whether institutions of higher learning are doing anything to increase the capacity of citizens to shape…

  2. Higher Education Exchange, 2010

    ERIC Educational Resources Information Center

    Brown, David W., Ed.; Witte, Deborah, Ed.

    2010-01-01

    "Higher Education Exchange" publishes case studies, analyses, news, and ideas about efforts within higher education to develop more democratic societies. Contributors to this issue of the "Higher Education Exchange" examine whether institutions of higher learning are doing anything to increase the capacity of citizens to shape their future.…

  3. Higher Education Exchange, 2008

    ERIC Educational Resources Information Center

    Brown, David W., Ed.; Witte, Deborah, Ed.

    2008-01-01

    "Higher Education Exchange" publishes case studies, analyses, news, and ideas about efforts within higher education to develop more democratic societies. Contributors to this issue of the "Higher Education Exchange" examine whether institutions of higher learning are doing anything to increase the capacity of citizens to shape…

  4. Kenyan Women: Challenges and Strategies toward Higher Educational Advancement.

    ERIC Educational Resources Information Center

    Otieno, Tabitha N.

    1998-01-01

    Examines challenges faced by female students at Nairobi universities and postsecondary training institutions, using questionnaires administered to students of both sexes and interviews of male and female education officers. All groups named financial constraints, strict teenage pregnancy policies, inadequate girls' school resources, low…

  5. Recent advances of flowering locus T gene in higher plants.

    PubMed

    Xu, Feng; Rong, Xiaofeng; Huang, Xiaohua; Cheng, Shuiyuan

    2012-01-01

    Flowering Locus T (FT) can promote flowering in the plant photoperiod pathway and also facilitates vernalization flowering pathways and other ways to promote flowering. The expression of products of the FT gene is recognized as important parts of the flowering hormone and can induce flowering by long-distance transportation. In the present study, many FT-like genes were isolated, and the transgenic results show that FT gene can promote flowering in plants. This paper reviews the progress of the FT gene and its expression products to provide meaningful information for further studies of the functions of FT genes.

  6. Advanced Motor Drives Studies

    NASA Technical Reports Server (NTRS)

    Ehsani, M.; Tchamdjou, A.

    1997-01-01

    This report presents an evaluation of advanced motor drive systems as a replacement for the hydrazine fueled APU units. The replacement technology must meet several requirements which are particular to the space applications and the Orbiter in general. Some of these requirements are high efficiency, small size, high power density. In the first part of the study several motors are compared, based on their characteristics and in light of the Orbiter requirements. The best candidate, the brushless DC is chosen because of its particularly good performance with regards to efficiency. Several power electronics drive technologies including the conventional three-phase hard switched and several soft-switched inverters are then presented. In the last part of the study, a soft-switched inverter is analyzed and compared to its conventional hard-switched counterpart. Optimal efficiency is a basic requirement for space applications and the soft-switched technology represents an unavoidable trend for the future.

  7. An efficient technique for higher order fractional differential equation.

    PubMed

    Ali, Ayyaz; Iqbal, Muhammad Asad; Ul-Hassan, Qazi Mahmood; Ahmad, Jamshad; Mohyud-Din, Syed Tauseef

    2016-01-01

    In this study, we establish exact solutions of fractional Kawahara equation by using the idea of [Formula: see text]-expansion method. The results of different studies show that the method is very effective and can be used as an alternative for finding exact solutions of nonlinear evolution equations (NLEEs) in mathematical physics. The solitary wave solutions are expressed by the hyperbolic, trigonometric, exponential and rational functions. Graphical representations along with the numerical data reinforce the efficacy of the used procedure. The specified idea is very effective, expedient for fractional PDEs, and could be extended to other physical problems.

  8. Equity, Status and Freedom: A Note on Higher Education

    ERIC Educational Resources Information Center

    Marginson, Simon

    2011-01-01

    Strategies to enhance socio-economic equity in higher education embody one or both of two objectives. The first strategy is to advance "fairness" by changing the composition of participation, bringing higher education into line with the ideal model of a socially representative system. The second strategy advances "inclusion" by…

  9. Advancing Reflectrometry

    DTIC Science & Technology

    2013-05-21

    transmissions, was first demonstrated using Global Navigation Satellite System ( GNSS ) reflections. Recently, reflectometry has been extended to digital... GNSS +R workshop provided an opportunity for engineers and Earth scientists to assess the state of the art, demonstrate new applications, and discuss...18 Eos, Vol. 94, No. 21, 21 May 2013 MEETING -.~ Advancing Reflectometry Workshop on Renectometry Using GNSS and Other Signals of Opportunity

  10. Technological Advancements

    ERIC Educational Resources Information Center

    Kennedy, Mike

    2010-01-01

    The influx of technology has brought significant improvements to school facilities. Many of those advancements can be found in classrooms, but when students head down the hall to use the washrooms, they are likely to find a host of technological innovations that have improved conditions in that part of the building. This article describes modern…

  11. Research Advances

    ERIC Educational Resources Information Center

    King, Angela G.

    2004-01-01

    Research advances, a new feature in Journal of Chemical Engineering that brings information about innovations in current areas of research to high school and college science faculty with an intent to provide educators with timely descriptions of latest progress in research that can be integrated into existing courses to update course content and…

  12. Technology Efficiency Study on Nuclear Power and Coal Power in Guangdong Province Based on DEA

    SciTech Connect

    Yinong Li; Dong Wang

    2006-07-01

    Guangdong Province has taken the lead in embarking on nuclear power development to resolve its dire lack of primary resources. With the deepening of the on-going structural reform in the electric power sector in China, the market competition scheme is putting electricity generation enterprises under severe strain. Consequently, it is incumbent upon the nuclear power producers to steadily upgrade management, enhance technical capabilities, reduce cost and improve efficiency. At present, gradual application of such efficiency evaluation methodology has already commenced in some sectors in China including the electric power industry. The purpose of this paper is to use the Data Envelopment Analysis (DEA), which is a cutting-edge approach in the efficiency evaluation field - to study the technological efficiency between nuclear power and coal power in Guangdong Province. The DEA results demonstrate that, as far as Guangdong Province is concerned, the technological efficiency of nuclear power is higher than that of coal power in terms of Technological Efficiency (TE), Pure Technology Efficiency (PTE) and Scale Efficiency (SE). The reason is that nuclear power technology is advanced with a much higher equipment availability factor. Under the same scale, the generation output of nuclear power is far higher than that of equivalent coal power generation. With the environmental protection and sustainable development requirements taken into full account, nuclear power constitutes a clean, safe and highly-efficient energy form which should be extensively harnessed in Guangdong Province to fuel its future continuing economic growth. (authors)

  13. ADVANCED RECIPROCATING COMPRESSION TECHNOLOGY (ARCT)

    SciTech Connect

    Danny M. Deffenbaugh; Klaus Brun; Ralph E. Harris; J. Pete Harrell; Robert J. Mckee; J. Jeffrey Moore; Steven J. Svedeman; Anthony J. Smalley; Eugene L. Broerman; Robert A Hart; Marybeth G. Nored; Ryan S. Gernentz; Shane P. Siebenaler

    2005-12-01

    The U.S. natural gas pipeline industry is facing the twin challenges of increased flexibility and capacity expansion. To meet these challenges, the industry requires improved choices in gas compression to address new construction and enhancement of the currently installed infrastructure. The current fleet of installed reciprocating compression is primarily slow-speed integral machines. Most new reciprocating compression is and will be large, high-speed separable units. The major challenges with the fleet of slow-speed integral machines are: limited flexibility and a large range in performance. In an attempt to increase flexibility, many operators are choosing to single-act cylinders, which are causing reduced reliability and integrity. While the best performing units in the fleet exhibit thermal efficiencies between 90% and 92%, the low performers are running down to 50% with the mean at about 80%. The major cause for this large disparity is due to installation losses in the pulsation control system. In the better performers, the losses are about evenly split between installation losses and valve losses. The major challenges for high-speed machines are: cylinder nozzle pulsations, mechanical vibrations due to cylinder stretch, short valve life, and low thermal performance. To shift nozzle pulsation to higher orders, nozzles are shortened, and to dampen the amplitudes, orifices are added. The shortened nozzles result in mechanical coupling with the cylinder, thereby, causing increased vibration due to the cylinder stretch mode. Valve life is even shorter than for slow speeds and can be on the order of a few months. The thermal efficiency is 10% to 15% lower than slow-speed equipment with the best performance in the 75% to 80% range. The goal of this advanced reciprocating compression program is to develop the technology for both high speed and low speed compression that will expand unit flexibility, increase thermal efficiency, and increase reliability and integrity

  14. Advanced ATC: An aircraft perspective

    NASA Technical Reports Server (NTRS)

    Credeur, Leonard; Williams, David H.; Howell, William E.; Spitzer, Cary R.

    1986-01-01

    The principal operational improvements desired by commercial aircraft operators in the United States are efficient aircraft operations and delay reductions at the major terminals. Efforts underway within the Advanced Transport Operating Systems Program at the Langley Research Center to provide a technology basis for reducing delay while improving aircraft efficiency are discussed. The principal thrust is the development of time-based traffic control concepts which could be used within the framework of the upgraded National Airspace System and which would allow conventionally equipped aircraft to operate in a manner compatible with advanced aircraft.

  15. [Eco-efficiency of Jiaozuo industry sectors].

    PubMed

    Du, Yan-chun; Jiang, Pan; Mao, Jian-su; Xu, Lin-yu

    2011-05-01

    Jiaozuo city was taken as a representative industry city and its industry energy consumption and industry emissions such as wastewater,solid waste, SO2, dust and so on were selected as corresponding environmental loads. The contribution rate to the environmental loads and eco-efficiencies of Jiaozuo industry sectors were analyzed quantitatively. The results show that, the industry sector with the highest energy eco-efficiency is Mining and Processing of Ferrous Metal Ores (FMM), 43.19 x 10(4) yuan x tce(-1), and its contribution rate is 0.003%; the one with the highest wastewater-related eco-efficiency is Manufacture of Transport Equipment (TRM), 3.58 x 10(4) yuan x t(-1), and its contribution rate is 0.0001%; the one with the highest solid waste-related eco-efficiency is Manufacture of Special Purpose Machinery( SMM), 323.22 x 10(4) yuan x t(-1), and its contribution rate is 0.005%; the one with the highest SO2 emission-related eco-efficiency is Manufacture of Special Purpose Machinery (SMM), 19.74 x 10(4) yuan x kg(-1), and its contribution rate is 0.0001%; the one with the highest dust emission-related eco-efficiency is Manufacture of Rubber (RUM), 6.75 x 10(4) yuan x kg(-1), and its contribution rate is 0.001%. It can be seen that the industry sector with high value of eco-efficiency always contributes less to its environmental load, which results that the industry sectors with high eco-efficiencies only play a weak role in leading the overall industry eco-efficiency. A succinct distance index (SDI) was proposed to estimate the differences between Jiaozuo and China average for their eco-efficiency of every industrial sector. The values of SDI range from -1 to 63.45, and the absolute value of SDI with positive value is much greater than that with negative value, which indicates that the values of eco-efficiencies for the advanced industry sectors of Jiaozuo city are much higher than those for China's industry sectors average.

  16. Aircraft energy efficiency. Overview

    SciTech Connect

    Not Available

    1981-01-01

    Six advanced technology development projects that could cut fuel consumption of future civil air transports by as much as 50 percent are highlighted. These include improved engine components, better engine design, thin short blades for turboprop aircaft using composite primary structures for weight reduction, the use of supercritical wings, higher aspect ratio, and winglets for improved aerodynamics active controls and laminar flow control. The time span of each of the six efforts and NASA's expected expenditures are also discussed.

  17. Aircraft energy efficiency. Overview

    NASA Technical Reports Server (NTRS)

    1981-01-01

    Six advanced technology development projects that could cut fuel consumption of future civil air transports by as much as 50 percent are highlighted. These include improved engine components; better engine design; thin short blades for turboprop aircaft; using composite primary structures for weight reduction; the use of supercritical wings, higher aspect ratio, and winglets for improved aerodynamics; active controls; and laminar flow control. The time span of each of the six efforts and NASA's expected expenditures are also discussed.

  18. Advanced Integrated Traction System

    SciTech Connect

    Greg Smith; Charles Gough

    2011-08-31

    The United States Department of Energy elaborates the compelling need for a commercialized competitively priced electric traction drive system to proliferate the acceptance of HEVs, PHEVs, and FCVs in the market. The desired end result is a technically and commercially verified integrated ETS (Electric Traction System) product design that can be manufactured and distributed through a broad network of competitive suppliers to all auto manufacturers. The objectives of this FCVT program are to develop advanced technologies for an integrated ETS capable of 55kW peak power for 18 seconds and 30kW of continuous power. Additionally, to accommodate a variety of automotive platforms the ETS design should be scalable to 120kW peak power for 18 seconds and 65kW of continuous power. The ETS (exclusive of the DC/DC Converter) is to cost no more than $660 (55kW at $12/kW) to produce in quantities of 100,000 units per year, should have a total weight less than 46kg, and have a volume less than 16 liters. The cost target for the optional Bi-Directional DC/DC Converter is $375. The goal is to achieve these targets with the use of engine coolant at a nominal temperature of 105C. The system efficiency should exceed 90% at 20% of rated torque over 10% to 100% of maximum speed. The nominal operating system voltage is to be 325V, with consideration for higher voltages. This project investigated a wide range of technologies, including ETS topologies, components, and interconnects. Each technology and its validity for automotive use were verified and then these technologies were integrated into a high temperature ETS design that would support a wide variety of applications (fuel cell, hybrids, electrics, and plug-ins). This ETS met all the DOE 2010 objectives of cost, weight, volume and efficiency, and the specific power and power density 2015 objectives. Additionally a bi-directional converter was developed that provides charging and electric power take-off which is the first step

  19. India's Higher Education Challenges

    ERIC Educational Resources Information Center

    Altbach, Philip G.

    2014-01-01

    India, with the world's second largest higher education system and a rapidly growing economy as one of the BRIC nations, faces significant challenges in building both capacity and excellence in higher education. India's higher education system is characterized by "islands of excellence in a sea of mediocrity." The mainstream universities…

  20. Disorders in Higher Education.

    ERIC Educational Resources Information Center

    Walton, Clarence C.; Bolman, Frederick deW.

    Conditions affecting the moral and intellectual integrity of American colleges and universities are discussed in a series of papers collected from the 56th American Assembly on "The Integrity of Higher Education." An erosion of public confidence in higher education is noted and it is suggested that the expectations of higher education have not…

  1. Advanced Microturbine Systems

    SciTech Connect

    Rosfjord, T; Tredway, W; Chen, A; Mulugeta, J; Bhatia, T

    2008-12-31

    In July 2000, the United Technologies Research Center (UTRC) was one of five recipients of a US Department of Energy contract under the Advanced Microturbine System (AMS) program managed by the Office of Distributed Energy (DE). The AMS program resulted from several government-industry workshops that recognized that microturbine systems could play an important role in improving customer choice and value for electrical power. That is, the group believed that electrical power could be delivered to customers more efficiently and reliably than the grid if an effective distributed energy strategy was followed. Further, the production of this distributed power would be accomplished with less undesirable pollutants of nitric oxides (NOx) unburned hydrocarbons (UHC), and carbon monoxide (CO). In 2000, the electrical grid delivered energy to US customers at a national average of approximately 32% efficiency. This value reflects a wide range of powerplants, but is dominated by older, coal burning stations that provide approximately 50% of US electrical power. The grid efficiency is also affected by transmission and distribution (T&D) line losses that can be significant during peak power usage. In some locations this loss is estimated to be 15%. Load pockets can also be so constrained that sufficient power cannot be transmitted without requiring the installation of new wires. New T&D can be very expensive and challenging as it is often required in populated regions that do not want above ground wires. While historically grid reliability has satisfied most customers, increasing electronic transactions and the computer-controlled processes of the 'digital economy' demand higher reliability. For them, power outages can be very costly because of transaction, work-in-progress, or perishable commodity losses. Powerplants that produce the grid electrical power emit significant levels of undesirable NOx, UHC, and CO pollutants. The level of emission is quoted as either a technology

  2. Higher order mode damping in an ALS test cavity

    SciTech Connect

    Jacob, A.F.; Lamberston, G.R. ); Barry, W. )

    1990-06-01

    The higher order mode attenuation scheme proposed for the Advanced Light Source accelerating cavities consists of two broad-band dampers placed 90{degrees} apart on the outer edge. In order to assess the damping efficiency a test assembly was built. The HOM damping was obtained by comparing the peak values of the transmission through the cavity for both the damped and the undamped case. Because of the high number of modes and frequency shifts due to the damping gear, the damping was assessed statistically, by averaging over several modes. In the frequency range from 1.5 to 5.5 GHz, average damping greater than 100 was obtained. 1 ref., 6 figs.

  3. Investigating Drama: Higher Drama and Advanced Higher Drama. Support Material for Teachers and Students

    ERIC Educational Resources Information Center

    Morson, Bob

    2002-01-01

    The teaching of drama in Scottish secondary schools focuses on: (1) Creating; (2) Presenting; and (3) Evaluating. In engaging with these elements, students at "all" stages are encouraged to develop their own dramas from ideas which are prompted by a variety of stimuli. From a wide range of starting points, students work through the…

  4. Advanced Seal Sessions I and II

    NASA Technical Reports Server (NTRS)

    Steinetz, Bruce M.; Dunlap, Patrick H.; Sarawate, Neelesh

    2013-01-01

    As aircraft operators continue to seek higher fuel efficiency, lower emissions, and longer on-wing performance, turbine engine designers are scrutinizing all components for areas of improvement. To achieve overall goals, turbine pressure ratios and by-pass ratios continue to climb. Also, designers are seeking to minimize parasitic and cooling flows to extract the most useful work out of the flow stream, placing a renewed interest on seal technology and secondary flow path management. In the area of future manned spacecraft, advancements are being examined for both habitat seals and re-entry thermal protection system thermal barrierseals. For long duration space craft, designers are continuing to look for savings in parasitic losses to reduce the amount of cabin re-supply air that needs to be brought along. This is placing greater demands on seal designs and materials to exhibit low leakage and be resistant to space environments. For future missions to and from distant planets, the re-entry heating will be higher than for low-earth orbit or lunar return motivating advanced thermal barrier development. This presentation will provide an overview of the seal challenges and opportunities in these diverse areas.

  5. Advanced Combustion

    SciTech Connect

    Holcomb, Gordon R.

    2013-03-11

    The activity reported in this presentation is to provide the mechanical and physical property information needed to allow rational design, development and/or choice of alloys, manufacturing approaches, and environmental exposure and component life models to enable oxy-fuel combustion boilers to operate at Ultra-Supercritical (up to 650{degrees}C & between 22-30 MPa) and/or Advanced Ultra-Supercritical conditions (760{degrees}C & 35 MPa).

  6. Advanced Separation Consortium

    SciTech Connect

    2006-01-01

    The Center for Advanced Separation Technologies (CAST) was formed in 2001 under the sponsorship of the US Department of Energy to conduct fundamental research in advanced separation and to develop technologies that can be used to produce coal and minerals in an efficient and environmentally acceptable manner. The CAST consortium consists of seven universities - Virginia Tech, West Virginia University, University of Kentucky, Montana Tech, University of Utah, University of Nevada-Reno, and New Mexico Tech. The consortium brings together a broad range of expertise to solve problems facing the US coal industry and the mining sector in general. At present, a total of 60 research projects are under way. The article outlines some of these, on topics including innovative dewatering technologies, removal of mercury and other impurities, and modelling of the flotation process. 1 photo.

  7. Advanced ground station architecture

    NASA Technical Reports Server (NTRS)

    Zillig, David; Benjamin, Ted

    1994-01-01

    This paper describes a new station architecture for NASA's Ground Network (GN). The architecture makes efficient use of emerging technologies to provide dramatic reductions in size, operational complexity, and operational and maintenance costs. The architecture, which is based on recent receiver work sponsored by the Office of Space Communications Advanced Systems Program, allows integration of both GN and Space Network (SN) modes of operation in the same electronics system. It is highly configurable through software and the use of charged coupled device (CCD) technology to provide a wide range of operating modes. Moreover, it affords modularity of features which are optional depending on the application. The resulting system incorporates advanced RF, digital, and remote control technology capable of introducing significant operational, performance, and cost benefits to a variety of NASA communications and tracking applications.

  8. Advanced aerodynamics. Selected NASA research

    NASA Technical Reports Server (NTRS)

    1981-01-01

    This Conference Publication contains selected NASA papers that were presented at the Fifth Annual Status Review of the NASA Aircraft Energy Efficiency (ACEE) Energy Efficient Transport (EET) Program held at Dryden Flight Research Center in Edwards, California on September 14 to 15, 1981. These papers describe the status of several NASA in-house research activities in the areas of advanced turboprops, natural laminar flow, oscillating control surfaces, high-Reynolds-number airfoil tests, high-lift technology, and theoretical design techniques.

  9. Energy Efficiency Upgrades

    SciTech Connect

    Roby Williams

    2012-03-29

    The energy efficiency upgrades project at Hardin County General Hospital did not include research nor was it a demonstration project. The project enabled the hospital to replace outdated systems with modern efficient models. Hardin County General Hospital is a 501c3, nonprofit hospital and the sole community provider for Hardin and Pope Counties of Illinois. This project provided much needed equipment and facility upgrades that would not have been possible through locally generated funding. Task 1 was a reroofing of the hospital. The hospital architect designed the replacement to increase the energy efficiency of the hospital roof/ceiling structure. Task 2 was replacement and installation of a new more efficient CT scanner for the hospital. Included in the project was replacement of HVAC equipment for the entire radiological suite. Task 5 was a replacement and installation of a new higher capacity diesel-fueled emergency generator for the hospital replacing a 50+ year old gas-fired generator. Task 7 was the replacement of 50+ year-old walk-in cooler/freezer with a newer, energy efficient model. Task 8 was the replacement of 10+ year-old washing machines in the hospital laundry with higher capacity, energy efficient models. Task 9 was replacement of 50-year old single pane curtain window system with double-pane insulated windows. Additionally, insulation was added around ventilation systems and the curtain wall system.

  10. Reform of Chinese Higher Education in 1992.

    ERIC Educational Resources Information Center

    Zuo, Xin

    1993-01-01

    Reforms are productive only when guided by fundamental educational principles: efficiency, justice, progress, and humanization. Using higher education as a political weapon and subjecting education to politics and economics undermines the nature of higher education. The present grass-roots decision-making movement for university autonomy in China…

  11. Policy Dimensions of Analytics in Higher Education

    ERIC Educational Resources Information Center

    Petersen, Rodney J.

    2012-01-01

    The current higher education landscape is replete with demands for improving accountability, increasing efficiency, and controlling costs. At the same time, information technologies make it easier to collect and analyze information to measure outcomes or to assist in decision making. Consequently, there is a higher demand for better information…

  12. ADVANCED TURBINE SYSTEMS PROGRAM

    SciTech Connect

    Gregory Gaul

    2004-04-21

    Natural gas combustion turbines are rapidly becoming the primary technology of choice for generating electricity. At least half of the new generating capacity added in the US over the next twenty years will be combustion turbine systems. The Department of Energy has cosponsored with Siemens Westinghouse, a program to maintain the technology lead in gas turbine systems. The very ambitious eight year program was designed to demonstrate a highly efficient and commercially acceptable power plant, with the ability to fire a wide range of fuels. The main goal of the Advanced Turbine Systems (ATS) Program was to develop ultra-high efficiency, environmentally superior and cost effective competitive gas turbine systems for base load application in utility, independent power producer and industrial markets. Performance targets were focused on natural gas as a fuel and included: System efficiency that exceeds 60% (lower heating value basis); Less than 10 ppmv NO{sub x} emissions without the use of post combustion controls; Busbar electricity that are less than 10% of state of the art systems; Reliability-Availability-Maintainability (RAM) equivalent to current systems; Water consumption minimized to levels consistent with cost and efficiency goals; and Commercial systems by the year 2000. In a parallel effort, the program was to focus on adapting the ATS engine to coal-derived or biomass fuels. In Phase 1 of the ATS Program, preliminary investigators on different gas turbine cycles demonstrated that net plant LHV based efficiency greater than 60% was achievable. In Phase 2 the more promising cycles were evaluated in greater detail and the closed-loop steam-cooled combined cycle was selected for development because it offered the best solution with least risk for achieving the ATS Program goals for plant efficiency, emissions, cost of electricity and RAM. Phase 2 also involved conceptual ATS engine and plant design and technology developments in aerodynamics, sealing

  13. Light Duty Efficient, Clean Combustion

    SciTech Connect

    Donald Stanton

    2010-12-31

    Cummins has successfully completed the Light Duty Efficient Clean Combustion (LDECC) cooperative program with DoE. This program was established in 2007 in support of the Department of Energy's Vehicles Technologies Advanced Combustion and Emissions Control initiative to remove critical barriers to the commercialization of advanced, high efficiency, emissions compliant internal combustion (IC) engines for light duty vehicles. Work in this area expanded the fundamental knowledge of engine combustion to new regimes and advanced the knowledge of fuel requirements for these diesel engines to realize their full potential. All of the following objectives were met with fuel efficiency improvement targets exceeded: (1) Improve light duty vehicle (5000 lb. test weight) fuel efficiency by 10.5% over today's state-of-the-art diesel engine on the FTP city drive cycle; (2) Develop and design an advanced combustion system plus aftertreatment system that synergistically meets Tier 2 Bin 5 NOx and PM emissions standards while demonstrating the efficiency improvements; (3) Maintain power density comparable to that of current conventional engines for the applicable vehicle class; and (4) Evaluate different fuel components and ensure combustion system compatibility with commercially available biofuels. Key accomplishments include: (1) A 25% improvement in fuel efficiency was achieved with the advanced LDECC engine equipped with a novel SCR aftertreatment system compared to the 10.5% target; (2) An 11% improvement in fuel efficiency was achieved with the advanced LDECC engine and no NOx aftertreamtent system; (3) Tier 2 Bin 5 and SFTP II emissions regulations were met with the advanced LDECC engine equipped with a novel SCR aftertreatment system; (4) Tier 2 Bin 5 emissions regulations were met with the advanced LDECC engine and no NOx aftertreatment, but SFTP II emissions regulations were not met for the US06 test cycle - Additional technical barriers exist for the no NOx

  14. Span efficiency in hawkmoths

    PubMed Central

    Henningsson, Per; Bomphrey, Richard J.

    2013-01-01

    Flight in animals is the result of aerodynamic forces generated as flight muscles drive the wings through air. Aerial performance is therefore limited by the efficiency with which momentum is imparted to the air, a property that can be measured using modern techniques. We measured the induced flow fields around six hawkmoth species flying tethered in a wind tunnel to assess span efficiency, ei, and from these measurements, determined the morphological and kinematic characters that predict efficient flight. The species were selected to represent a range in wingspan from 40 to 110 mm (2.75 times) and in mass from 0.2 to 1.5 g (7.5 times) but they were similar in their overall shape and their ecology. From high spatio-temporal resolution quantitative wake images, we extracted time-resolved downwash distributions behind the hawkmoths, calculating instantaneous values of ei throughout the wingbeat cycle as well as multi-wingbeat averages. Span efficiency correlated positively with normalized lift and negatively with advance ratio. Average span efficiencies for the moths ranged from 0.31 to 0.60 showing that the standard generic value of 0.83 used in previous studies of animal flight is not a suitable approximation of aerodynamic performance in insects. PMID:23658113

  15. Aerodynamic Design Study of Advanced Multistage Axial Compressor

    NASA Technical Reports Server (NTRS)

    Larosiliere, Louis M.; Wood, Jerry R.; Hathaway, Michael D.; Medd, Adam J.; Dang, Thong Q.

    2002-01-01

    As a direct response to the need for further performance gains from current multistage axial compressors, an investigation of advanced aerodynamic design concepts that will lead to compact, high-efficiency, and wide-operability configurations is being pursued. Part I of this report describes the projected level of technical advancement relative to the state of the art and quantifies it in terms of basic aerodynamic technology elements of current design systems. A rational enhancement of these elements is shown to lead to a substantial expansion of the design and operability space. Aerodynamic design considerations for a four-stage core compressor intended to serve as a vehicle to develop, integrate, and demonstrate aerotechnology advancements are discussed. This design is biased toward high efficiency at high loading. Three-dimensional blading and spanwise tailoring of vector diagrams guided by computational fluid dynamics (CFD) are used to manage the aerodynamics of the high-loaded endwall regions. Certain deleterious flow features, such as leakage-vortex-dominated endwall flow and strong shock-boundary-layer interactions, were identified and targeted for improvement. However, the preliminary results were encouraging and the front two stages were extracted for further aerodynamic trimming using a three-dimensional inverse design method described in part II of this report. The benefits of the inverse design method are illustrated by developing an appropriate pressure-loading strategy for transonic blading and applying it to reblade the rotors in the front two stages of the four-stage configuration. Multistage CFD simulations based on the average passage formulation indicated an overall efficiency potential far exceeding current practice for the front two stages. Results of the CFD simulation at the aerodynamic design point are interrogated to identify areas requiring additional development. In spite of the significantly higher aerodynamic loadings, advanced CFD

  16. Predicting Mathematical Aptitude for Higher Education

    ERIC Educational Resources Information Center

    McDonald, Betty

    2008-01-01

    This present study seeks to predict mathematical aptitude for higher education by examining the relationship between mathematics results from the Caribbean Examinations Council (CXC) general proficiency examination and the results from the General Certificate of Education (GCE) advanced level examination. This present study arose from a more…

  17. Supporting Success: Aboriginal Students in Higher Education

    ERIC Educational Resources Information Center

    Gallop, Cynthia J.; Bastien, Nicole

    2016-01-01

    For most Aboriginal students in Canada, the term "success" in postsecondary education is more complicated than the mainstream notions of higher socioeconomic status and career advancement. Historically, "success" for Aboriginal peoples in postsecondary education was linked to issues of assimilation, since to be successful meant…

  18. Learning Autonomy: Higher Education Reform in Kazakhstan

    ERIC Educational Resources Information Center

    Hartley, Matthew; Gopaul, Bryan; Sagintayeva, Aida; Apergenova, Renata

    2016-01-01

    Higher education is a key economic and social priority in the global arena. Many countries have sought to advance reforms aimed at increasing access, promoting greater educational quality, and ensuring financial responsibility and sustainability. Often, strategies for achieving these aims are informed by experiences elsewhere. However,…

  19. Blue Ocean Strategy for Higher Education

    ERIC Educational Resources Information Center

    Bragança, Ricardo

    2016-01-01

    In today's higher education world we see a shift in teaching and educational trends that are slowly materializing due to the advent of new technologies, new academic frameworks and the need to adapt to society's incremental advancements. The implementation of reforms, however, did not have the desired outcome since those were applied to an…

  20. Understanding the Mindset of Higher Education CIOs

    ERIC Educational Resources Information Center

    Kelley, Todd D.; Sharif, Nawaz M.

    2005-01-01

    Higher education has two primary purposes: (1) student learning for the improvement of self, family, employers, and society at large; and (2) knowledge generation, conservation, and dissemination for the advancement of everyone, now and in the future. To succeed in meeting these goals over the long term, colleges and universities: (1) have to be…

  1. Advanced fuel chemistry for advanced engines.

    SciTech Connect

    Taatjes, Craig A.; Jusinski, Leonard E.; Zador, Judit; Fernandes, Ravi X.; Miller, James A.

    2009-09-01

    Autoignition chemistry is central to predictive modeling of many advanced engine designs that combine high efficiency and low inherent pollutant emissions. This chemistry, and especially its pressure dependence, is poorly known for fuels derived from heavy petroleum and for biofuels, both of which are becoming increasingly prominent in the nation's fuel stream. We have investigated the pressure dependence of key ignition reactions for a series of molecules representative of non-traditional and alternative fuels. These investigations combined experimental characterization of hydroxyl radical production in well-controlled photolytically initiated oxidation and a hybrid modeling strategy that linked detailed quantum chemistry and computational kinetics of critical reactions with rate-equation models of the global chemical system. Comprehensive mechanisms for autoignition generally ignore the pressure dependence of branching fractions in the important alkyl + O{sub 2} reaction systems; however we have demonstrated that pressure-dependent 'formally direct' pathways persist at in-cylinder pressures.

  2. Advanced space transportation systems

    NASA Technical Reports Server (NTRS)

    Disher, J. H.; Hethcoat, J. P.; Page, M. A.

    1981-01-01

    Projected growth in space transportation capabilities beyond the initial Space Shuttle is discussed in terms of earth-to-low-orbit launch vehicles as well as transportation beyond low orbit (orbit transfer vehicles). Growth versions of the Shuttle and heavy-lift derivatives of the Shuttle are shown conceptually. More advanced launch vehicle concepts are also shown, based on rocket propulsion or combinations of rocket and air-breathing propulsion. Orbit transfer vehicle concepts for personnel transport and for cargo transport are discussed, including chemical rocket as well as electric propulsion. Finally, target levels of capability and efficiencies for later time periods are discussed and compared with the prospective vehicle concepts mentioned earlier.

  3. Advanced Turboprop Project

    NASA Technical Reports Server (NTRS)

    Hager, Roy D.; Vrabel, Deborah

    1988-01-01

    At the direction of Congress, a task force headed by NASA was organized in 1975 to identify potential fuel saving concepts for aviation. The result was the Aircraft Energy Efficiency (ACEE) Program implemented in 1976. An important part of the program was the development of advanced turboprop technology for Mach 0.65 to 0.85 applications having the potential fuel saving of 30 to 50 percent relative to existing turbofan engines. A historical perspective is presented of the development and the accomplishments that brought the turboprop to successful flight tests in 1986 and 1987.

  4. Batch efficiency

    NASA Astrophysics Data System (ADS)

    Schwickerath, Ulrich; Silva, Ricardo; Uria, Christian

    2010-04-01

    A frequent source of concern for resource providers is the efficient use of computing resources in their centers. This has a direct impact on requests for new resources. There are two different but strongly correlated aspects to be considered: while users are mostly interested in a good turn-around time for their jobs, resource providers are mostly interested in a high and efficient usage of their available resources. Both things, the box usage and the efficiency of individual user jobs, need to be closely monitored so that the sources of the inefficiencies can be identified. At CERN, the Lemon monitoring system is used for both purposes. Examples of such sources are poorly written user code, inefficient access to mass storage systems, and dedication of resources to specific user groups. As a first step for improvements CERN has launched a project to develop a scheduler add-on that allows careful overloading of worker nodes that run idle jobs.

  5. Industrial Advanced Turbine Systems Program overview

    SciTech Connect

    Esbeck, D.W.

    1995-10-01

    The U.S. Department of Energy (DOE), in partnership with industry, has set new performance standards for industrial gas turbines through the creation of the Industrial Advanced Turbine System Program. Their leadership will lead to the development of an optimized, energy efficient, and environmentally friendly gas turbine power systems in this size class (3-to-20 MW). The DOE has already created a positive effect by encouraging gas turbine system manufacturers to reassess their product and technology plans using the new higher standards as the benchmark. Solar Turbines has been a leader in the industrial gas turbine business, and is delighted to have joined with the DOE in developing the goals and vision for this program. We welcome the opportunity to help the national goals of energy conservation and environmental enhancement. The results of this program should lead to the U.S. based gas turbine industry maintaining its international leadership and the creation of highly paid domestic jobs.

  6. Advanced Manufacturing

    DTIC Science & Technology

    2002-01-01

    manufacturing will enable the mass customization of products and create new market opportunities in the commercial sector. Flexible manufacturing ...the mass customization of products and create new market opportunities in the commercial sector. One of the most promising flexible manufacturing ... manufacturing , increase efficiency and productivity. Research in leading edge technologies continues to promise exciting new manufacturing methods

  7. BIOMASS GASIFICATION AND POWER GENERATION USING ADVANCED GAS TURBINE SYSTEMS

    SciTech Connect

    David Liscinsky

    2002-10-20

    A multidisciplined team led by the United Technologies Research Center (UTRC) and consisting of Pratt & Whitney Power Systems (PWPS), the University of North Dakota Energy & Environmental Research Center (EERC), KraftWork Systems, Inc. (kWS), and the Connecticut Resource Recovery Authority (CRRA) has evaluated a variety of gasified biomass fuels, integrated into advanced gas turbine-based power systems. The team has concluded that a biomass integrated gasification combined-cycle (BIGCC) plant with an overall integrated system efficiency of 45% (HHV) at emission levels of less than half of New Source Performance Standards (NSPS) is technically and economically feasible. The higher process efficiency in itself reduces consumption of premium fuels currently used for power generation including those from foreign sources. In addition, the advanced gasification process can be used to generate fuels and chemicals, such as low-cost hydrogen and syngas for chemical synthesis, as well as baseload power. The conceptual design of the plant consists of an air-blown circulating fluidized-bed Advanced Transport Gasifier and a PWPS FT8 TwinPac{trademark} aeroderivative gas turbine operated in combined cycle to produce {approx}80 MWe. This system uses advanced technology commercial products in combination with components in advanced development or demonstration stages, thereby maximizing the opportunity for early implementation. The biofueled power system was found to have a levelized cost of electricity competitive with other new power system alternatives including larger scale natural gas combined cycles. The key elements are: (1) An Advanced Transport Gasifier (ATG) circulating fluid-bed gasifier having wide fuel flexibility and high gasification efficiency; (2) An FT8 TwinPac{trademark}-based combined cycle of approximately 80 MWe; (3) Sustainable biomass primary fuel source at low cost and potentially widespread availability-refuse-derived fuel (RDF); (4) An overall integrated

  8. Energy efficient engine

    NASA Technical Reports Server (NTRS)

    Burrus, D.; Sabla, P. E.; Bahr, D. W.

    1980-01-01

    The feasibility of meeting or closely approaching the emissions goals established for the Energy Efficient Engine (E3) Project with an advanced design, single annular combustor was determined. A total of nine sector combustor configurations and one full-annular-combustor configuration were evaluated. Acceptable levels of carbon monoxide and hydrocarbon emissions were obtained with several of the sector combustor configurations tested, and several of the configurations tested demonstrated reduced levels of nitrogen oxides compared to conventional, single annular designs. None of the configurations tested demonstrated nitrogen oxide emission levels that meet the goal of the E3 Project.

  9. Advanced Rankine and Brayton cycle power systems: Materials needs and opportunities

    NASA Technical Reports Server (NTRS)

    Grisaffe, S. J.; Guentert, D. C.

    1974-01-01

    Conceptual advanced potassium Rankine and closed Brayton power conversion cycles offer the potential for improved efficiency over steam systems through higher operating temperatures. However, for utility service of at least 100,000 hours, materials technology advances will be needed for such high temperature systems. Improved alloys and surface protection must be developed and demonstrated to resist coal combustion gases as well as potassium corrosion or helium surface degradation at high temperatures. Extensions in fabrication technology are necessary to produce large components of high temperature alloys. Long time property data must be obtained under environments of interest to assure high component reliability.

  10. Advanced Modified High Performance Synthetic Jet Actuator with Curved Chamber

    NASA Technical Reports Server (NTRS)

    Xu, Tian-Bing (Inventor); Su, Ji (Inventor); Jiang, Xiaoning (Inventor)

    2014-01-01

    The advanced modified high performance synthetic jet actuator with optimized curvature shape chamber (ASJA-M) is a synthetic jet actuator (SJA) with a lower volume reservoir or chamber. A curved chamber is used, instead of the conventional cylinder chamber, to reduce the dead volume of the jet chamber and increase the efficiency of the synthetic jet actuator. The shape of the curvature corresponds to the maximum displacement (deformation) profile of the electroactive diaphragm. The jet velocity and mass flow rate for the ASJA-M will be several times higher than conventional piezoelectric actuators.

  11. PHOENIX. Higher Wage Careers.

    ERIC Educational Resources Information Center

    Bismarck State Coll., ND.

    This document outlines the curriculum plan for the one-semester vocational-technical training component of PHOENIX: A Model Program for Higher-Wage Potential Careers offered by Bismarck State College (North Dakota) which prepares and/or retrains individuals for higher-wage technical careers. The comprehensive model for the program is organized…

  12. Reinventing Higher Education

    ERIC Educational Resources Information Center

    Hayes, Dianne

    2012-01-01

    Higher education institutions are in the battle of a lifetime as they are coping with political and economic uncertainties, threats to federal aid, declining state support, higher tuition rates and increased competition from for-profit institutions. Amid all these challenges, these institutions are pressed to keep up with technological demands,…

  13. Reinventing Continuing Higher Education

    ERIC Educational Resources Information Center

    Walshok, Mary Lindenstein

    2012-01-01

    Re-inventing continuing higher education is about finding ways to be a more central player in a region's civic, cultural, and economic life as well as in the education of individuals for work and citizenship. Continuing higher education will require data gathering, analytical tools, convening authority, interpretive skills, new models of delivery,…

  14. Hypermedia and Higher Education.

    ERIC Educational Resources Information Center

    Lemke, Jay L.

    1993-01-01

    Discusses changes in higher education that are resulting from the use of hypermedia. Topics addressed include the structure of traditional texts; a distributed model for academic communication; independent learning as a model for higher education; skills for hypermedia literacy; database searching; information retrieval; authoring skills; design…

  15. Chicanos in Higher Education.

    ERIC Educational Resources Information Center

    Flores, Juan M., Ed.

    1992-01-01

    This "special theme" journal issue focuses on higher education of Chicanos and Latinos. The journal includes the following articles: (1) "Dilemmas of Chicano and Latino Professors in U.S. Universities" (Hisauro Garza); (2) "Analysis of Tenure Among Hispanic Higher Education Faculty" (Richard R. Verdugo); (3)…

  16. Higher Education in California

    ERIC Educational Resources Information Center

    Public Policy Institute of California, 2016

    2016-01-01

    Higher education enhances Californians' lives and contributes to the state's economic growth. But population and education trends suggest that California is facing a large shortfall of college graduates. Addressing this short­fall will require strong gains for groups that have been historically under­represented in higher education. Substantial…

  17. Higher Education's Caste System

    ERIC Educational Resources Information Center

    Iannone, Ron

    2004-01-01

    In this article, the author discusses the history of the present caste system in higher education. He shows how the public's perception of this caste system is based on image and not usually on the quality of teaching and curriculum in colleges and universities. Finally, he discusses a model for accessibility to higher education and how higher…

  18. Comparative Higher Education: Bibliography

    ERIC Educational Resources Information Center

    Cardozier, V. R.

    This comparative higher education bibliography from the graduate program in Higher Education at University of Texas at Austin provides references with publication dates through 1990 under the following categories: "General and Canada" (85); "Africa (Sub-Sahara)" (23); "Asia" (122); "Australia and New…

  19. Gender and Higher Education

    ERIC Educational Resources Information Center

    Bank, Barbara J., Ed.

    2011-01-01

    This comprehensive, encyclopedic review explores gender and its impact on American higher education across historical and cultural contexts. Challenging recent claims that gender inequities in U.S. higher education no longer exist, the contributors--leading experts in the field--reveal the many ways in which gender is embedded in the educational…

  20. Higher Education Exchange

    ERIC Educational Resources Information Center

    Brown, David W., Ed.; Witte, Deborah, Ed.

    2009-01-01

    This volume begins with an essay by Noelle McAfee, a contributor who is familiar to readers of Higher Education Exchange (HEX). She reiterates Mathews' argument regarding the disconnect between higher education's sense of engagement and the public's sense of engagement, and suggests a way around the epistemological conundrum of "knowledge…

  1. Quality in Higher Education.

    ERIC Educational Resources Information Center

    Ruben, Brent D., Ed.

    This volume contains 21 new and classic papers and readings on quality philosophies and concepts, first, as they have been applied in business and industry but primarily as they relate to and can be applied in higher education. The introduction is titled "The Quality Approach in Higher Education: Context and Concepts for Change" by Brent…

  2. Minorities in Higher Education.

    ERIC Educational Resources Information Center

    Justiz, Manuel J., Ed.; And Others

    This book presents 19 papers on efforts to increase the participation of members of minority groups in higher education. The papers are: (1) "Demographic Trends and the Challenges to American Higher Education" (Manuel Justiz); (2) "Three Realities: Minority Life in the United States--The Struggle for Economic Equity (adapted by Don…

  3. Higher Education Exchange 2006

    ERIC Educational Resources Information Center

    Brown, David W., Ed.; Witte, Deborah, Ed.

    2006-01-01

    Contributors to this issue of the Higher Education Exchange debate the issues around knowledge production, discuss the acquisition of deliberative skills for democracy, and examine how higher education prepares, or does not prepare, students for citizenship roles. Articles include: (1) "Foreword" (Deborah Witte); (2) "Knowledge,…

  4. Advancing colloidal quantum dot photovoltaic technology

    NASA Astrophysics Data System (ADS)

    Cheng, Yan; Arinze, Ebuka S.; Palmquist, Nathan; Thon, Susanna M.

    2016-06-01

    Colloidal quantum dots (CQDs) are attractive materials for solar cells due to their low cost, ease of fabrication and spectral tunability. Progress in CQD photovoltaic technology over the past decade has resulted in power conversion efficiencies approaching 10%. In this review, we give an overview of this progress, and discuss limiting mechanisms and paths for future improvement in CQD solar cell technology.We briefly summarize nanoparticle synthesis and film processing methods and evaluate the optoelectronic properties of CQD films, including the crucial role that surface ligands play in materials performance. We give an overview of device architecture engineering in CQD solar cells. The compromise between carrier extraction and photon absorption in CQD photovoltaics is analyzed along with different strategies for overcoming this trade-off. We then focus on recent advances in absorption enhancement through innovative device design and the use of nanophotonics. Several light-trapping schemes, which have resulted in large increases in cell photocurrent, are described in detail. In particular, integrating plasmonic elements into CQD devices has emerged as a promising approach to enhance photon absorption through both near-field coupling and far-field scattering effects. We also discuss strategies for overcoming the single junction efficiency limits in CQD solar cells, including tandem architectures, multiple exciton generation and hybrid materials schemes. Finally, we offer a perspective on future directions for the field and the most promising paths for achieving higher device efficiencies.

  5. ADX - Advanced Divertor and RF Tokamak Experiment

    NASA Astrophysics Data System (ADS)

    Greenwald, Martin; Labombard, Brian; Bonoli, Paul; Irby, Jim; Terry, Jim; Wallace, Greg; Vieira, Rui; Whyte, Dennis; Wolfe, Steve; Wukitch, Steve; Marmar, Earl

    2015-11-01

    The Advanced Divertor and RF Tokamak Experiment (ADX) is a design concept for a compact high-field tokamak that would address boundary plasma and plasma-material interaction physics challenges whose solution is critical for the viability of magnetic fusion energy. This device would have two crucial missions. First, it would serve as a Divertor Test Tokamak, developing divertor geometries, materials and operational scenarios that could meet the stringent requirements imposed in a fusion power plant. By operating at high field, ADX would address this problem at a level of power loading and other plasma conditions that are essentially identical to those expected in a future reactor. Secondly, ADX would investigate the physics and engineering of high-field-side launch of RF waves for current drive and heating. Efficient current drive is an essential element for achieving steady-state in a practical, power producing fusion device and high-field launch offers the prospect of higher efficiency, better control of the current profile and survivability of the launching structures. ADX would carry out this research in integrated scenarios that simultaneously demonstrate the required boundary regimes consistent with efficient current drive and core performance.

  6. Characterization of advanced electric propulsion systems

    NASA Technical Reports Server (NTRS)

    Ray, P. K.

    1982-01-01

    Characteristics of several advanced electric propulsion systems are evaluated and compared. The propulsion systems studied are mass driver, rail gun, MPD thruster, hydrogen free radical thruster and mercury electron bombardment ion engine. These are characterized by specific impulse, overall efficiency, input power, average thrust, power to average thrust ratio and average thrust to dry weight ratio. Several important physical characteristics such as dry system mass, accelerator length, bore size and current pulse requirement are also evaluated in appropriate cases. Only the ion engine can operate at a specific impulse beyond 2000 sec. Rail gun, MPD thruster and free radical thruster are currently characterized by low efficiencies. Mass drivers have the best performance characteristics in terms of overall efficiency, power to average thrust ratio and average thrust to dry weight ratio. But, they can only operate at low specific impulses due to large power requirements and are extremely long due to limitations of driving current. Mercury ion engines have the next best performance characteristics while operating at higher specific impulses. It is concluded that, overall, ion engines have somewhat better characteristics as compared to the other electric propulsion systems.

  7. Advance in phage display technology for bioanalysis.

    PubMed

    Tan, Yuyu; Tian, Tian; Liu, Wenli; Zhu, Zhi; J Yang, Chaoyong

    2016-06-01

    Phage display technology has emerged as a powerful tool for target gene expression and target-specific ligand selection. It is widely used to screen peptides, proteins and antibodies with the advantages of simplicity, high efficiency and low cost. A variety of targets, including ions, small molecules, inorganic materials, natural and biological polymers, nanostructures, cells, bacteria, and even tissues, have been demonstrated to generate specific binding ligands by phage display. Phages and target-specific ligands screened by phage display have been widely used as affinity reagents in therapeutics, diagnostics and biosensors. In this review, comparisons of different types of phage display systems are first presented. Particularly, microfluidic-based phage display, which enables screening with high throughput, high efficiency and integration, is highlighted. More importantly, we emphasize the advances in biosensors based on phages or phage-derived probes, including nonlytic phages, lytic phages, peptides or proteins screened by phage display, phage assemblies and phage-nanomaterial complexes. However, more efficient and higher throughput phage display methods are still needed to meet an explosion in demand for bioanalysis. Furthermore, screening of cyclic peptides and functional peptides will be the hotspot in bioanalysis.

  8. Efficiency Goals

    ERIC Educational Resources Information Center

    Graham, Donald

    2009-01-01

    The lighting of learning environments is an important focus in designing new schools and renovating older schools. Studies long have shown that appropriate lighting levels and daylighting improve learning; now, climbing energy budgets have spurred school administrators to seek more efficient use of lighting. Electricity rates are expected to rise…

  9. Advancing Efforts to Energize Native Alaska (Brochure)

    SciTech Connect

    Not Available

    2013-04-01

    This brochure describes key programs and initiatives of the DOE Office of Indian Energy Policy and Programs to advance energy efficiency, renewable energy, and energy infrastructure projects in Alaska Native villages.

  10. The NASA Aircraft Energy Efficiency program

    NASA Technical Reports Server (NTRS)

    Klineberg, J. M.

    1979-01-01

    A review is provided of the goals, objectives, and recent progress in each of six aircraft energy efficiency programs aimed at improved propulsive, aerodynamic and structural efficiency for future transport aircraft. Attention is given to engine component improvement, an energy efficient turbofan engine, advanced turboprops, revolutionary gains in aerodynamic efficiency for aircraft of the late 1990s, laminar flow control, and composite primary aircraft structures.

  11. Research on stable, high-efficiency, amorphous silicon multijunction modules. Final subcontract report, 1 May 1990--30 June 1993

    SciTech Connect

    Arya, R R; Bennett, M; Chen, L; Fieselmann, B; Li, Y; Maley, N; Newton, J; Podlesny, R; Yang, L

    1994-06-01

    This report describes work performed dudng the period 1 July 1992 through 30 June 1993. Dudng this period, major improvements were achieved in the stabilized conversion efficiency of triple-junction modules. These resulted in the demonstration of triple-junction initial conversion efficiency of 11.3% and stabilized conversion efficiency of approximately 9%. Significant advances were made in the deposition of a-Si:H intrinsic layers that led to higher open-circuit voltage and improved stability. Thin microcrystalline n-layers were developed and scaled up for the recombination junctions in triple-junction modules that resulted in higher open-circuit voltage and fill factors. These improvements resulted in the demonstration of a-Si/a-Si/a-SiGe triple-junction modules with initial conversion efficiencies as high as 11.35% and ``stabilized`` efficiencies of about 9%.

  12. Functional brain network efficiency predicts intelligence.

    PubMed

    Langer, Nicolas; Pedroni, Andreas; Gianotti, Lorena R R; Hänggi, Jürgen; Knoch, Daria; Jäncke, Lutz

    2012-06-01

    The neuronal causes of individual differences in mental abilities such as intelligence are complex and profoundly important. Understanding these abilities has the potential to facilitate their enhancement. The purpose of this study was to identify the functional brain network characteristics and their relation to psychometric intelligence. In particular, we examined whether the functional network exhibits efficient small-world network attributes (high clustering and short path length) and whether these small-world network parameters are associated with intellectual performance. High-density resting state electroencephalography (EEG) was recorded in 74 healthy subjects to analyze graph-theoretical functional network characteristics at an intracortical level. Ravens advanced progressive matrices were used to assess intelligence. We found that the clustering coefficient and path length of the functional network are strongly related to intelligence. Thus, the more intelligent the subjects are the more the functional brain network resembles a small-world network. We further identified the parietal cortex as a main hub of this resting state network as indicated by increased degree centrality that is associated with higher intelligence. Taken together, this is the first study that substantiates the neural efficiency hypothesis as well as the Parieto-Frontal Integration Theory (P-FIT) of intelligence in the context of functional brain network characteristics. These theories are currently the most established intelligence theories in neuroscience. Our findings revealed robust evidence of an efficiently organized resting state functional brain network for highly productive cognitions.

  13. The NASA Aircraft Energy Efficiency Program

    NASA Technical Reports Server (NTRS)

    Klineberg, J. M.

    1978-01-01

    The objective of the NASA Aircraft Energy Efficiency Program is to accelerate the development of advanced technology for more energy-efficient subsonic transport aircraft. This program will have application to current transport derivatives in the early 1980s and to all-new aircraft of the late 1980s and early 1990s. Six major technology projects were defined that could result in fuel savings in commercial aircraft: (1) Engine Component Improvement, (2) Energy Efficient Engine, (3) Advanced Turboprops, (4) Energy Efficiency Transport (aerodynamically speaking), (5) Laminar Flow Control, and (6) Composite Primary Structures.

  14. SERI advanced wind turbine blades

    SciTech Connect

    Tangler, J.; Smith, B.; Jager, D.

    1992-02-01

    The primary goal of the Solar Energy Research Institute`s (SERI) advanced wind turbine blades is to convert the kinetic energy in the wind into mechanical energy in an inexpensive and efficient manner. To accomplish this goal, advanced wind turbine blades have been developed by SERI that utilize unique airfoil technology. Performance characteristics of the advanced blades were verified through atmospheric testing on fixed-pitch, stall-regulated horizontal-axis wind turbines (HAWTs). Of the various wind turbine configurations, the stall-regulated HAWT dominates the market because of its simplicity and low cost. Results of the atmospheric tests show that the SERI advanced blades produce 10% to 30% more energy than conventional blades. 6 refs.

  15. SERI advanced wind turbine blades

    SciTech Connect

    Tangler, J.; Smith, B.; Jager, D.

    1992-02-01

    The primary goal of the Solar Energy Research Institute's (SERI) advanced wind turbine blades is to convert the kinetic energy in the wind into mechanical energy in an inexpensive and efficient manner. To accomplish this goal, advanced wind turbine blades have been developed by SERI that utilize unique airfoil technology. Performance characteristics of the advanced blades were verified through atmospheric testing on fixed-pitch, stall-regulated horizontal-axis wind turbines (HAWTs). Of the various wind turbine configurations, the stall-regulated HAWT dominates the market because of its simplicity and low cost. Results of the atmospheric tests show that the SERI advanced blades produce 10% to 30% more energy than conventional blades. 6 refs.

  16. 7 CFR 4280.155 - Protective advances.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Protective advances. 4280.155 Section 4280.155 Agriculture Regulations of the Department of Agriculture (Continued) RURAL BUSINESS-COOPERATIVE SERVICE AND... Efficiency Improvements Program Section B. Guaranteed Loans § 4280.155 Protective advances. All...

  17. Advances in thermal engineering

    SciTech Connect

    Kitto, J.B.; Fiveland, W.A.; Latham, C.E.; Peterson, G.P.

    1995-03-01

    Heat transfer--more broadly, thermal engineering--is playing an increasingly critical role in the development and successful application of advanced technology in virtually all fields. From space stations to hazardous-waste destruction to high-speed transport, from ozone-protecting refrigerants to ``night vision`` goggles, a vast range of technologies depend on energy management, heat-flow control, and temperature control to successfully meet their design objectives and attain commercial success. Meeting the continually escalating demand for electricity and ``cheap`` process that will remain a challenge. Environmental protection can depend not only on using energy more efficiently, but on changing the energy conversion process to reduce initial pollutant formation. Further advances in electronics, materials processing, and manufacturing will depend in part on more precise energy management and temperature control. The scale of thermal engineering is quite broad, extending from the very large to the near-molecular level, and from very high temperatures of thousands of degrees to very low ones approaching absolute zero. This breadth of application is illustrated by a review of three specific areas: application of advanced numerical modeling to large boiler furnaces (approaching 100 m in height) in order to improve environmental performance; application of microscale ({approximately}100 {micro}) heat pipes to cool high-performance electronic circuits; and a look at some of the manufacturing processes where heat transfer and thermal analysis improve quality, performance and cost.

  18. High Efficiency, Clean Combustion

    SciTech Connect

    Donald Stanton

    2010-03-31

    challenges to reduce oil consumption and greenhouse gases, meet stringent emissions regulations, provide customer value, and improve safety. The HECC program successfully reduced engine fuel consumption and greenhouse gases while providing greater customer valve. The US EPA 2010 emissions standard poses a significant challenge for developing clean diesel powertrains that meet the DoE Vehicle Technologies Multi-Year Program Plan (MYPP) for fuel efficiency improvement while remaining affordable. Along with exhaust emissions, an emphasis on heavy duty vehicle fuel efficiency is being driven by increased energy costs as well as the potential regulation of greenhouse gases. An important element of the success of meeting emissions while significantly improving efficiency is leveraging Cummins component technologies such as fuel injection equipment, aftertreatment, turbomahcinery, electronic controls, and combustion systems. Innovation in component technology coupled with system integration is enabling Cummins to move forward with the development of high efficiency clean diesel products with a long term goal of reaching a 55% peak brake thermal efficiency for the engine plus aftertreatment system. The first step in developing high efficiency clean products has been supported by the DoE co-sponsored HECC program. The objectives of the HECC program are: (1) To design and develop advanced diesel engine architectures capable of achieving US EPA 2010 emission regulations while improving the brake thermal efficiency by 10% compared to the baseline (a state of the art 2007 production diesel engine). (2) To design and develop components and subsystems (fuel systems, air handling, controls, etc) to enable construction and development of multi-cylinder engines. (3) To perform an assessment of the commercial viability of the newly developed engine technology. (4) To specify fuel properties conducive to improvements in emissions, reliability, and fuel efficiency for engines using high-efficiency

  19. Advanced Pacemaker

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Synchrony, developed by St. Jude Medical's Cardiac Rhythm Management Division (formerly known as Pacesetter Systems, Inc.) is an advanced state-of-the-art implantable pacemaker that closely matches the natural rhythm of the heart. The companion element of the Synchrony Pacemaker System is the Programmer Analyzer APS-II which allows a doctor to reprogram and fine tune the pacemaker to each user's special requirements without surgery. The two-way communications capability that allows the physician to instruct and query the pacemaker is accomplished by bidirectional telemetry. APS-II features 28 pacing functions and thousands of programming combinations to accommodate diverse lifestyles. Microprocessor unit also records and stores pertinent patient data up to a year.

  20. Forecasting Higher Education's Future.

    ERIC Educational Resources Information Center

    Boyken, Don; Buck, Tina S.; Kollie, Ellen; Przyborowski, Danielle; Rondinelli, Joseph A.; Hunter, Jeff; Hanna, Jeff

    2003-01-01

    Offers predictions on trends in higher education to accommodate changing needs, lower budgets, and increased enrollment. They involve campus construction, security, administration, technology, interior design, athletics, and transportation. (EV)

  1. LTE-advanced MIMO uplink for mobile system

    NASA Astrophysics Data System (ADS)

    Alhasson, Bader; Li, Xin; Bloul, Albe M.; Matin, M.

    2010-08-01

    By increasing multimedia communications, mobile communications are expected to reliably support high data rate transmissions. To provide higher peak rate at a better system efficiency, which is necessary to support broadband data services over Wireless links, we need to employ long term evolution Advanced (LTE-A) Multiple-input multiple-output MIMO uplink. The outline of this paper is to investigate and discuss the Long Term Evolution (LTE) for broadband wireless technologies and to discuss its functionality. We explore how LTE uses the inter-technology mobility to support a variety of access technology. This paper investigates the channel capacity and bit error rate of MIMO-OFDM system. In addition, it introduces various MIMO technologies employed in LTE and provide a brief overview on the MIMO technologies currently discussed in the LTE-Advanced forum.

  2. Higher harmonic rotor blade pitch control

    NASA Technical Reports Server (NTRS)

    Ewans, J. R.

    1976-01-01

    Tests of a model 'Reverse Velocity Rotor' system at high advance ratios and with twice-per-revolution cyclic pitch control were made under joint Navy-NASA sponsorship in the NASA, Ames 12 ft. pressure tunnel. The results showed significant gains in rotor performance at all advance ratios by using twice-per-revolution control. Detailed design studies have been made of alternative methods of providing higher harmonic motion including four types of mechanical systems and an electro-hydraulic system. The relative advantages and disadvantages are evaluated on the basis of stiffness, weight, volume, reliability and maintainability.

  3. The main factors that affect coupling efficiency of high-power semiconductor laser array and selfoc lens array

    NASA Astrophysics Data System (ADS)

    Jiang, Xiaoping; Liu, Desen

    2008-03-01

    The coupling technique of high-power semiconductor laser array is an advancing key project. A high power density collimated beam, which facula is much smaller, can be get by coupling high-power laser array with selfoc lens array. At the same time, the coupling efficiency is higher. The factors which affect the coupling efficiency mainly include NA, diameter, length and end surface fabricating of selfoc lens and coupling technique. In this paper, an 1×19 linear laser array which maximum continuous output power is 22W is coupled with a corresponding selfoc lens array. The maximum coupling efficiency is 58.2%.

  4. Oncology Advanced Practitioners Bring Advanced Community Oncology Care.

    PubMed

    Vogel, Wendy H

    2016-01-01

    Oncology care is becoming increasingly complex. The interprofessional team concept of care is necessary to meet projected oncology professional shortages, as well as to provide superior oncology care. The oncology advanced practitioner (AP) is a licensed health care professional who has completed advanced training in nursing or pharmacy or has completed training as a physician assistant. Oncology APs increase practice productivity and efficiency. Proven to be cost effective, APs may perform varied roles in an oncology practice. Integrating an AP into an oncology practice requires forethought given to the type of collaborative model desired, role expectations, scheduling, training, and mentoring.

  5. Routes to Ultrahigh Efficiency Photovoltaic and Photoelectrochemical Devices

    SciTech Connect

    Eisler, Carissa; Lloyd, John; Flowers, Cris; Darbe, Sunita; Warmann, Emily; Verlage, Erik; Fountaine, Kate; Hu, Shu; Lewis, Nathan; Atwater, Harry

    2014-10-15

    We discuss ‘full spectrum’ photovoltaic modules that leverage low-cost III-V compound semiconductor cells, efficient optics and unconventional fabrication/assembly methods, and discuss advances in photoelectrochemical water-splitting with high efficiency.

  6. Efficient Cryosolid Positron Moderators

    DTIC Science & Technology

    2012-08-01

    41 62 Correlation between CEM and γ−γ coincidence signals ........................................41 63 13.9-µm...70 114 Compiled RPA scans for data shown in Figure 112 ..............................................71 115 Correlation plot of γ−γ coincidence ... coincidence detection of the annihilation radiation with a pair of NaI(Tl) detectors. The CEM approach has a much higher detection efficiency, but the γ−γ

  7. Higher than Everest

    NASA Astrophysics Data System (ADS)

    Hodge, Paul

    2001-08-01

    Preface; 1. Higher than Everest; 2. Higher than that? - Other high peaks of Mars; 3. Descent into the Martian deep; 4. The cliffs of coprates; 5. A polar crossing; 6. The other Alps - climbing Mt. Blanc; 7. Pico peak - Monadnock of the moon; 8. The great Copernicus traverse; 9. Maxwell, mountains of mystery; 10. Volcanoes of Venus; 11. The cliff of discovery; 12. Descent into the maelstrom; 13. An Ionian adventure; 14. Mountain climbing in pizzaland; 15. Under the frozen sea; 16. Snowboarding through Saturn's rings; 17. Titan's tarry seas; 18. Climbing the cliff of Miranda; 19. The Yellowstone of the solar system; 20. All nine.

  8. Advanced stellarators

    NASA Astrophysics Data System (ADS)

    Schlüter, Arnulf

    1983-03-01

    Toroidal confinement of a plasma by an external magnetic field is not compatible with axisymmetry, in contrast to confinement by the pinch effect of induced electric currents as in a tokomak or by the reversed field pinch configuration. The existence of magnetic surfaces throughout the region in which grad p ≠ 0 is therefore not guaranteed in such configurations, though it is necessary for MHD-equilibrium when the lines of force possess a finite twist (or "rotational transform"). These twisted equilibria are called stellarators. The other type of external confinement requires all lines of force to be closed upon themselves and p to be function of the well defined quantity Q = φ d l/ B only. The resulting "bumpy" tori are sometimes also referred to as being M + S like. By discussing specific examples it is shown that stellarator configurations exist which retain as much as possible the properties of M + S like configurations, combine these with the magnetic well, and with an approximation to the isodynamic requirement of D. Palumbo. These so-called Advanced Stellarators shown an improvement in predicted particle confinement and beta-limit compared to the classical stellarators. They can also be viewed as forming a system of linked stabilized mirrors of small mirror ratio. These fields can be produced by modular coils. A prototype of such a configuration is being designed by the stellarator division of IPP under the name of Wendelstein VII-AS. Expected physical data and technical details of W VII-AS are given.

  9. ASME Material Challenges for Advanced Reactor Concepts

    SciTech Connect

    Piyush Sabharwall; Ali Siahpush

    2013-07-01

    This study presents the material Challenges associated with Advanced Reactor Concept (ARC) such as the Advanced High Temperature Reactor (AHTR). ACR are the next generation concepts focusing on power production and providing thermal energy for industrial applications. The efficient transfer of energy for industrial applications depends on the ability to incorporate cost-effective heat exchangers between the nuclear heat transport system and industrial process heat transport system. The heat exchanger required for AHTR is subjected to a unique set of conditions that bring with them several design challenges not encountered in standard heat exchangers. The corrosive molten salts, especially at higher temperatures, require materials throughout the system to avoid corrosion, and adverse high-temperature effects such as creep. Given the very high steam generator pressure of the supercritical steam cycle, it is anticipated that water tube and molten salt shell steam generators heat exchanger will be used. In this paper, the ASME Section III and the American Society of Mechanical Engineers (ASME) Section VIII requirements (acceptance criteria) are discussed. Also, the ASME material acceptance criteria (ASME Section II, Part D) for high temperature environment are presented. Finally, lack of ASME acceptance criteria for thermal design and analysis are discussed.

  10. Scientific foundations of advanced technology

    NASA Astrophysics Data System (ADS)

    Lymzin, V. N.

    The objective of increasing the efficiency of production is viewed as a complex scientific and engineering problem which includes the development of advanced processes, materials, and machinery on the basis of fundamental scientific research. Particular attention is given to a systems approach to the design of complex engineering structures and the use of computer-aided design and manufacturing. Some applications of advanced technology are discussed, such as machining by a pulsed laser plasma, the use of laser analyzers for the monitoring and control of technological and physicochemical processes, and vibrational technology applications. Other topics discussed include the development of metallurgical engineering, and automation in engineering industry.

  11. Handheld advanced nucleic acid analyzer

    NASA Astrophysics Data System (ADS)

    Benett, William J.; Richards, James B.; Stratton, Paul; Hadley, Dean R.; Bodtker, Brian H.; Nasarabadi, Shanavaz L.; Milanovich, Fred P.; Mariella, Raymond P., Jr.; Koopman, Ronald P.; Belgrader, Philip

    2000-12-01

    There is a growing need for portable, lightweight, battery operated instruments capable of detecting and identifying bio-warfare and bio-terrorism agents in the field. To address this need, we have developed a handheld PCR instrument. LLNLs advanced thermal cycling technology and expertise with portable, field tested biological instrumentation, combined with the development of real-time, fluorescence based PCR assays, has enabled the development of a very portable, versatile, power efficient PCR instrument with a simplified operating system designed for use by first responders. The heart of the instrument is the sample module, which incorporates the advanced silicon thermal cycler developed at LLNL.

  12. Technological advances in nontraditional orthodontics.

    PubMed

    Bonnick, Andrea M; Nalbandian, Mark; Siewe, Marianne S

    2011-07-01

    New technological advances have helped the orthodontic profession progress in traditional and surgical methods of treatment. The profession has seen transitions from traditional braces to self-ligating brackets, lingual braces, removable aligners, and more advanced technology, which have helped to address concerns that include but are not limited to better diagnostics, anchorage control, length of treatment, and esthetics. An increase in the number of adult patients seeking orthodontic treatment and the need for a timely efficient care will continue to drive technology and the use of cone beam computed tomography, miniscrews, piezocision, distraction osteogenesis, and bioengineering.

  13. Higher Education in Scotland.

    ERIC Educational Resources Information Center

    Neave, Guy; Cowper, Henry

    1979-01-01

    Analyzes higher education in Scotland in terms of its history and administrative structure and in light of the myths and beliefs about the traditional Scottish university. Differences from English universities are stressed. Journal available from Editor, Gabriel Fragniere, Institute of Education, 60 rue de la Concorde, B-1050, Brussels, Belgium.…

  14. Creativity in Higher Education

    ERIC Educational Resources Information Center

    Gaspar, Drazena; Mabic, Mirela

    2015-01-01

    The paper presents results of research related to perception of creativity in higher education made by the authors at the University of Mostar from Bosnia and Herzegovina. This research was based on a survey conducted among teachers and students at the University. The authors developed two types of questionnaires, one for teachers and the other…

  15. Women in Higher Education.

    ERIC Educational Resources Information Center

    Pifer, Alan

    Women have traditionally been discriminated against in higher education in both the attainment of degrees and in employment after earning degrees. It has been felt that women are not as capable, reliable, or effective as men in administrative and classroom situations. Statistics show that even at the present time women are underemployed and…

  16. Online Higher Education Commodity

    ERIC Educational Resources Information Center

    Chau, Paule

    2010-01-01

    This article analyzes the current trend towards online education. It examines some of the reasons for the trend and the ramifications it may have on students, faculty and institutions of higher learning. The success and profitability of online programs and institutions such as the University of Phoenix has helped to make the move towards online…

  17. Valuing Higher Education

    ERIC Educational Resources Information Center

    Pillay, Gerald J.

    2009-01-01

    The question of the value of higher education is today set in the context of an unprecedented banking and financial crisis. In this context of fundamental change and financial realignment, it is important that we as members of the university remake our case for why the university deserves to be considered alongside all those other worthy causes…

  18. Women in Higher Education.

    ERIC Educational Resources Information Center

    Amano, Masako

    1997-01-01

    The high level of college admission of women in Japan is analyzed relative to changes in social and educational values, continuing evidence of gender tracking, persistent doubts regarding "appropriateness" of higher education for women, employment opportunities and related national legislation, and values held by Japanese women…

  19. Higher Education Exchange, 2013

    ERIC Educational Resources Information Center

    Brown, David W., Ed.; Witte, Deborah, Ed.

    2013-01-01

    The Kettering Foundation's research has been focused on putting the public back into the public's business for more than thirty years. Some questions that have recently been useful to Kettering researchers as the foundation focuses on its work with institutional actors--especially higher education and its relationship with the public--have…

  20. Videoconferencing in Higher Education.

    ERIC Educational Resources Information Center

    Pitcher, Neil; Davidson, Kirsty; Goldfinch, Judy

    2000-01-01

    Describes examples of videoconferencing usage in higher education: project management, dissemination, lecture courses, keynote lectures, small groups, orals and interviews. Gives an account of staff and student experiences in each example, in the context of a collaborative project. Presents evaluation results, leading to a generally favorable…