Benefits of advanced technology in industrial cogeneration

NASA Technical Reports Server (NTRS)

Barna, G. J.; Burns, R. K.

1979-01-01

This broad study is aimed at identifying the most attractive advanced energy conversion systems for industrial cogeneration for the 1985 to 2000 time period and assessing the advantages of advanced technology systems compared to using today's commercially available technology. Energy conversion systems being studied include those using steam turbines, open cycle gas turbines, combined cycles, diesel engines, Stirling engines, closed cycle gas turbines, phosphoric acid and molten carbonate fuel cells and thermionics. Specific cases using today's commercially available technology are being included to serve as a baseline for assessing the advantages of advanced technology.

Regional characteristics relevant to advanced technology cogeneration development. [industrial energy

NASA Technical Reports Server (NTRS)

Manvi, R.

1981-01-01

To assist DOE in establishing research and development funding priorities in the area of advanced energy conversion technoloy, researchers at the Jet Propulsion Laboratory studied those specific factors within various regions of the country that may influence cogeneration with advanced energy conversion systems. Regional characteristics of advanced technology cogeneration possibilities are discussed, with primary emphasis given to coal derived fuels. Factors considered for the study were regional industry concentration, purchased fuel and electricity prices, environmental constraints, and other data of interest to industrial cogeneration.

Advanced Metals (Industrial Arts) Curriculum Guide. Bulletin 1750.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

This curriculum guide contains materials for a 13-unit course in advanced metals, the second metals course in the industrial arts curriculum for grades 10-12. It is intended for use by industrial arts teachers, supervisors, counselors, administrators, and teacher educators. A two-page course overview provides a brief course description; indicates…

Resource acquisition, distribution and end-use efficiencies and the growth of industrial society

NASA Astrophysics Data System (ADS)

Jarvis, A. J.; Jarvis, S. J.; Hewitt, C. N.

2015-10-01

A key feature of the growth of industrial society is the acquisition of increasing quantities of resources from the environment and their distribution for end-use. With respect to energy, the growth of industrial society appears to have been near-exponential for the last 160 years. We provide evidence that indicates that the global distribution of resources that underpins this growth may be facilitated by the continual development and expansion of near-optimal directed networks (roads, railways, flight paths, pipelines, cables etc.). However, despite this continual striving for optimisation, the distribution efficiencies of these networks must decline over time as they expand due to path lengths becoming longer and more tortuous. Therefore, to maintain long-term exponential growth the physical limits placed on the distribution networks appear to be counteracted by innovations deployed elsewhere in the system, namely at the points of acquisition and end-use of resources. We postulate that the maintenance of the growth of industrial society, as measured by global energy use, at the observed rate of ~ 2.4 % yr-1 stems from an implicit desire to optimise patterns of energy use over human working lifetimes.

Advanced Manufacturing Systems in Food Processing and Packaging Industry

NASA Astrophysics Data System (ADS)

Shafie Sani, Mohd; Aziz, Faieza Abdul

2013-06-01

In this paper, several advanced manufacturing systems in food processing and packaging industry are reviewed, including: biodegradable smart packaging and Nano composites, advanced automation control system consists of fieldbus technology, distributed control system and food safety inspection features. The main purpose of current technology in food processing and packaging industry is discussed due to major concern on efficiency of the plant process, productivity, quality, as well as safety. These application were chosen because they are robust, flexible, reconfigurable, preserve the quality of the food, and efficient.

[Reflections on the demographic future of advanced societies: a Canadian perspective].

PubMed

Romaniuc, A

1990-01-01

3 different perspectives on the below-replacement fertility in Quebec and in Canada are defined and discussed, and the possibility that political solutions will be sought for the demographic problem of low fertility is assessed. The 1st perspective views very low fertility as an outcome of social evolution that is common to advanced societies. In this view, the deeper reasons for low fertility can ultimately be traced to the rationalism, utilitarianism, and individualism produced by the age of enlightenment, and to the industrial revolution, which gave human beings improved control over fertility and modified the psychology and context of reproduction. Events involved in the post-baby boom fertility decline include development of very effective contraception, massive entry of women into the labor force, heightened consumption standards and desires, the rise of social security systems, and a lessened interest in children and family life generally. A 2nd perspective views low fertility as part of a self-regulating social process. Various mechanisms can be proposed by which fertility could spontaneously increase without any undesirable government intervention. Children, having become relatively rare, could become more highly desired as consumer goods. Fashions could change, and the current period of low fertility and abandonment of family values could be succeeded by a period of family renewal. Or the demographic implosion in the industrial world could lead to improved balance between population and environment, after which grouth could resume. But there is little evidence that the personal interest of couples in having children will suddenly correspond to collective interests. The 3rd perspective views demographic problems as matters of public choice and is founded on the notion that society has the capacity to mold its destiny. The will of society to do so is questionable, however, and the history of debates over the desirability of providing universal primary

Conflict of interest between professional medical societies and industry: a cross-sectional study of Italian medical societies’ websites

PubMed Central

Fabbri, Alice; Gregoraci, Giorgia; Tedesco, Dario; Ferretti, Filippo; Gilardi, Francesco; Iemmi, Diego; Lisi, Cosima; Lorusso, Angelo; Natali, Francesca; Shahi, Edit; Rinaldi, Alessandro

2016-01-01

Objective To describe how Italian medical societies interact with pharmaceutical and medical device industries through an analysis of the information available on their websites. Design Cross sectional study. Setting Italy. Participants 154 medical societies registered with the Italian Federation of Medical-Scientific Societies. Main outcome measures Indicators of industry sponsorship (presence of industry sponsorship in the programme of the last medical societies’ annual conference; presence of manufacturers’ logos on the homepage; presence of industry sponsorship of satellite symposia during the last annual conference). Results 131 Italian medical societies were considered. Of these, 4.6% had an ethical code covering relationships with industry on their websites, while 45.6% had a statute that mentioned the issue of conflict of interest and 6.1% published the annual financial report. With regard to industry sponsorship, 64.9% received private sponsorship for their last conference, 29.0% had manufacturers’ logos on their webpage, while 35.9% had industry-sponsored satellite symposia at their last conference. The presence of an ethical code on the societies’ websites was associated with both an increased risk of industry sponsorship of the last conference (relative risk (RR) 1.22, 95% CIs 1.01 to 1.48 after adjustment) and of conferences and/or satellite symposia (RR 1.22, 95% CIs 1.02 to 1.48 after adjustment) but not with the presence of manufacturers’ logos on the websites (RR 1.79, 95% CIs 0.66 to 4.82 after adjustment). No association was observed with the other indicators of governance and transparency. Conclusions This survey shows that industry sponsorship of Italian medical societies’ conferences is common, while the presence of a structured regulatory system is not. Disclosure of the amount of industry funding to medical societies is scarce. The level of transparency therefore needs to be improved and the whole relationship between medical

Molecular engineering of industrial enzymes: recent advances and future prospects.

PubMed

Yang, Haiquan; Li, Jianghua; Shin, Hyun-Dong; Du, Guocheng; Liu, Long; Chen, Jian

2014-01-01

Many enzymes are efficiently produced by microbes. However, the use of natural enzymes as biocatalysts has limitations such as low catalytic efficiency, low activity, and low stability, especially under industrial conditions. Many protein engineering technologies have been developed to modify natural enzymes and eliminate these limitations. Commonly used protein engineering strategies include directed evolution, site-directed mutagenesis, truncation, and terminal fusion. This review summarizes recent advances in the molecular engineering of industrial enzymes and discusses future prospects in this field. We expect this review to increase interest in and advance the molecular engineering of industrial enzymes.

Industrial Inspection with Open Eyes: Advance with Machine Vision Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Zheng; Ukida, H.; Niel, Kurt

Machine vision systems have evolved significantly with the technology advances to tackle the challenges from modern manufacturing industry. A wide range of industrial inspection applications for quality control are benefiting from visual information captured by different types of cameras variously configured in a machine vision system. This chapter screens the state of the art in machine vision technologies in the light of hardware, software tools, and major algorithm advances for industrial inspection. The inspection beyond visual spectrum offers a significant complementary to the visual inspection. The combination with multiple technologies makes it possible for the inspection to achieve a bettermore » performance and efficiency in varied applications. The diversity of the applications demonstrates the great potential of machine vision systems for industry.« less

Advanced Technical Drafting (Industrial Arts) Curriculum Guide. Bulletin 1751.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

This curriculum guide contains materials for a 17-unit course in advanced technical drafting, a followup to the basic technical drafting course in the industrial arts curriculum for grades 10-12. It is intended for use by industrial arts teachers, supervisors, counselors, administrators, and teacher educators. A three-page course overview provides…

NASA/industry advanced turboprop technology program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ziemianski, J.A.; Whitlow, J.B. Jr.

1988-01-01

Experimental and analytical effort shows that use of advanced turboprop (propfan) propulsion instead of conventional turbofans in the older narrow-body airline fleet could reduce fuel consumption for this type of aircraft by up to 50 percent. The NASA Advanced Turboprop (ATP) program was formulated to address the key technologies required for these thin, swept-blade propeller concepts. A NASA, industry, and university team was assembled to develop and validate applicable design codes and prove by ground and flight test the viability of these propeller concepts. Some of the history of the ATP project, an overview of some of the issues, andmore » a summary of the technology developed to make advanced propellers viable in the high-subsonic cruise speed application are presented. The ATP program was awarded the prestigious Robert J. Collier Trophy for the greatest achievement in aeronautics and astronautics in America in 1987.« less

NASA/industry advanced turboprop technology program

NASA Technical Reports Server (NTRS)

Ziemianski, Joseph A.; Whitlow, John B., Jr.

1988-01-01

Experimental and analytical effort shows that use of advanced turboprop (propfan) propulsion instead of conventional turbofans in the older narrow-body airline fleet could reduce fuel consumption for this type of aircraft by up to 50 percent. The NASA Advanced Turboprop (ATP) program was formulated to address the key technologies required for these thin, swept-blade propeller concepts. A NASA, industry, and university team was assembled to develop and validate applicable design codes and prove by ground and flight test the viability of these propeller concepts. Some of the history of the ATP project, an overview of some of the issues, and a summary of the technology developed to make advanced propellers viable in the high-subsonic cruise speed application are presented. The ATP program was awarded the prestigious Robert J. Collier Trophy for the greatest achievement in aeronautics and astronautics in America in 1987.

Advanced Seal Development for Large Industrial Gas Turbines

NASA Technical Reports Server (NTRS)

Chupp, Raymond E.

2006-01-01

Efforts are in progress to develop advanced sealing for large utility industrial gas turbine engines (combustion turbines). Such seals have been under developed for some time for aero gas turbines. It is desired to transition this technology to combustion turbines. Brush seals, film riding face and circumferential seals, and other dynamic and static sealing approaches are being incorporated into gas turbines for aero applications by several engine manufacturers. These seals replace labyrinth or other seals with significantly reduced leakage rates. For utility industrial gas turbines, leakage reduction with advanced sealing can be even greater with the enormous size of the components. Challenges to transitioning technology include: extremely long operating times between overhauls; infrequent but large radial and axial excursions; difficulty in coating larger components; and maintenance, installation, and durability requirements. Advanced sealing is part of the Advanced Turbine Systems (ATS) engine development being done under a cooperative agreement between Westinghouse and the US Department of Energy, Office of Fossil Energy. Seal development focuses on various types of seals in the 501ATS engine both at dynamic and static locations. Each development includes rig testing of candidate designs and subsequent engine validation testing of prototype seals. This presentation gives an update of the ongoing ATS sealing efforts with special emphasis on brush seals.

The unique achievements of Japanese industries in the super-aged society.

PubMed

Kawahara, Keiji; Narikawa, Masafumi

2015-01-01

Unique efforts of the Japanese industries in meeting the needs of the super-aged society are introduced through their association with International Association for Universal Design (IAUD). Considerations are made on how successes were brought about, what can be learned as well as what issues should be addressed in the future. Copyright © 2014. Published by Elsevier Ltd.

Engineering industrial yeast for renewable advanced biofuels applications

USDA-ARS?s Scientific Manuscript database

The industrial yeast Saccharomyces cerevisiae is a candidate for the next-generation biocatalyst development due to its unique genomic background and robust performance in fermentation-based production. In order to meet challenges of renewable and sustainable advanced biofuels conversion including ...

The future of continuing medical education: the roles of medical professional societies and the health care industry: Position paper prepared with contributions from the European Society of Cardiology Committees for Advocacy, Education and Industry Relations, Endorsed by the Board of the European Society of Cardiology.

PubMed

2018-02-28

In recent years, wide ranging biomedical innovation has provided powerful new approaches for prevention, diagnosis and management of diseases. In order to translate such innovation into effective practice, physicians must frequently update their knowledge base and skills through continuing medical education and training. Medical Professional Societies, run as not-for-profit organizations led by peers, are uniquely placed to deliver balanced, disease oriented and patient centred education. The medical industry has a major role in the development of new, improved technology, devices and medication. In fact, the best innovations have been achieved through collaboration with scientists, clinical academics and practicing physicians. Industry has for many years been committed to ensure the optimal and safe application of its products by providing unrestricted support of medical education developed and delivered by international and national learned societies. Recently adopted Codes of Practice for the Pharmaceutical and Device industry were intended to enhance public trust in the relationship between biomedical industry and physicians. Unexpectedly, changes resulting from adoption of the Codes have limited the opportunity for unconditional industry support of balanced medical education in favour of a more direct involvement of industry in informing physicians about their products. We describe the need for continuing medical education in Cardiovascular Medicine in Europe, interaction between the medical profession and medical industry, and propose measures to safeguard the provision of high quality, balanced medical education.

An assessment of advanced technology for industrial cogeneration

NASA Technical Reports Server (NTRS)

Moore, N.

1983-01-01

The potential of advanced fuel utilization and energy conversion technologies to enhance the outlook for the increased use of industrial cogeneration was assessed. The attributes of advanced cogeneration systems that served as the basis for the assessment included their fuel flexibility and potential for low emissions, efficiency of fuel or energy utilization, capital equipment and operating costs, and state of technological development. Over thirty advanced cogeneration systems were evaluated. These cogeneration system options were based on Rankine cycle, gas turbine engine, reciprocating engine, Stirling engine, and fuel cell energy conversion systems. The alternatives for fuel utilization included atmospheric and pressurized fluidized bed combustors, gasifiers, conventional combustion systems, alternative energy sources, and waste heat recovery. Two advanced cogeneration systems with mid-term (3 to 5 year) potential were found to offer low emissions, multi-fuel capability, and a low cost of producing electricity. Both advanced cogeneration systems are based on conventional gas turbine engine/exhaust heat recovery technology; however, they incorporate advanced fuel utilization systems.

Occupational Propensity for Training in a Late Industrial Society: Evidence from Russia

ERIC Educational Resources Information Center

Anikin, Vasiliy A.

2017-01-01

What factors best explain the low incidence of skills training in a late industrial society like Russia? This research undertakes a multilevel analysis of the role of occupational structure in the probability of training. The explanatory power of occupation-specific determinants and skills polarization are evaluated, using a representative 2012…

Advanced Industrial Materials (AIM) program. Annual progress report. FY 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-04-01

The Advanced Industrial Materials (AIM) Program underwent a major transformation in Fiscal Year 1995 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven `Vision Industries` that use about 80% ofmore » industrial energy and generated about 90% of industrial wastes. These are: aluminium; chemical; forest products; glass; metal casting; refineries; and steel. OIT is working with these industries, through appropriate organizations, to develop Visions of the desired condition of each industry some 20 or 25 years in the future and then to prepare Road Maps and Implementation Plans to enable them to reach their goals. The mission of AIM has, therefore, changed to `Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.` Though AIM remains essentially a National Laboratory Program, it is necessary that each project have industrial partners, including suppliers to, and customers of, the seven industries. Now, well into FY 1996, the transition is nearly complete and the AIM Program remains healthy and productive, thanks to the superb investigators and Laboratory Program Managers. Separate abstracts have been indexed into the energy database for articles from this report.« less

Advanced Woodworking (Industrial Arts) Curriculum Guide. Bulletin 1752.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

This curriculum guide contains materials for a 12-unit course in advanced woodworking for grades 11-12. It is intended for use by industrial arts teachers, supervisors, counselors, administrators, and teacher educators. A two-page course overview provides a brief course description; indicates target grade level, prerequisites, course goals, and…

Recent advances in the evolutionary engineering of industrial biocatalysts.

PubMed

Winkler, James D; Kao, Katy C

2014-12-01

Evolutionary engineering has been used to improve key industrial strain traits, such as carbon source utilization, tolerance to adverse environmental conditions, and resistance to chemical inhibitors, for many decades due to its technical simplicity and effectiveness. The lack of need for prior genetic knowledge underlying the phenotypes of interest makes this a powerful approach for strain development for even species with minimal genotypic information. While the basic experimental procedure for laboratory adaptive evolution has remained broadly similar for many years, a range of recent advances show promise for improving the experimental workflows for evolutionary engineering by accelerating the pace of evolution, simplifying the analysis of evolved mutants, and providing new ways of linking desirable phenotypes to selectable characteristics. This review aims to highlight some of these recent advances and discuss how they may be used to improve industrially relevant microbial phenotypes. Copyright © 2014 Elsevier Inc. All rights reserved.

Does gender bias influence awards given by societies?

NASA Astrophysics Data System (ADS)

Holmes, Mary Anne; Asher, Pranoti; Farrington, John; Fine, Rana; Leinen, Margaret S.; LeBoy, Phoebe

2011-11-01

AGU is a participant in a U.S. National Science Foundation (NSF)-funded project called Advancing Ways of Awarding Recognition in Disciplinary Societies (AWARDS), which seeks to examine whether gender bias affects selection of recipients of society awards. AGU is interested in learning why there is a higher proportion of female recipients of service and education awards over the past 2 decades. Combined with a lower rate of receipt of research awards, these results suggest that implicit (subconscious) bias in favor of male candidates still influences awardee selection. Six other professional societies (American Chemical Society, American Mathematical Society, American Society of Anesthesiologists, Mathematical Association of America, Society for Neuroscience, and Society for Industrial and Applied Mathematics) are participating in the project. Volunteers from each participant society attended an Association for Women in Science (AWIS)-sponsored workshop in May 2010 to examine data and review literature on best practices for fair selection of society awardees. A draft proposal for implementing these practices will be brought before the AGU Council and the Honors and Recognition Committee at their upcoming meetings.

Advanced Industrial Materials (AIM) fellowship program

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCleary, D.D.

1997-04-01

The Advanced Industrial Materials (AIM) Program administers a Graduate Fellowship Program focused toward helping students who are currently under represented in the nation`s pool of scientists and engineers, enter and complete advanced degree programs. The objectives of the program are to: (1) establish and maintain cooperative linkages between DOE and professors at universities with graduate programs leading toward degrees or with degree options in Materials Science, Materials Engineering, Metallurgical Engineering, and Ceramic Engineering, the disciplines most closely related to the AIM Program at Oak Ridge National Laboratory (ORNL); (2) strengthen the capabilities and increase the level of participation of currentlymore » under represented groups in master`s degree programs, and (3) offer graduate students an opportunity for practical research experience related to their thesis topic through the three-month research assignment or practicum at ORNL. The program is administered by the Oak Ridge Institute for Science and Education (ORISE).« less

ESL for Hotel/Hospitality Industry. Level: Advanced Beginner/Intermediate.

ERIC Educational Resources Information Center

Western Suffolk County Board of Cooperative Educational Services, Northport, NY.

This document contains 16 lesson plans for an advanced beginning and intermediate course in work-related English for non-English- or limited-English-speaking entry-level employees in the hotel and hospitality industry. Course objectives are as follows: helping participants understand and use job-specific vocabulary; receive and understand…

Synthetic biology advances and applications in the biotechnology industry: a perspective.

PubMed

Katz, Leonard; Chen, Yvonne Y; Gonzalez, Ramon; Peterson, Todd C; Zhao, Huimin; Baltz, Richard H

2018-06-18

Synthetic biology is a logical extension of what has been called recombinant DNA (rDNA) technology or genetic engineering since the 1970s. As rDNA technology has been the driver for the development of a thriving biotechnology industry today, starting with the commercialization of biosynthetic human insulin in the early 1980s, synthetic biology has the potential to take the industry to new heights in the coming years. Synthetic biology advances have been driven by dramatic cost reductions in DNA sequencing and DNA synthesis; by the development of sophisticated tools for genome editing, such as CRISPR/Cas9; and by advances in informatics, computational tools, and infrastructure to facilitate and scale analysis and design. Synthetic biology approaches have already been applied to the metabolic engineering of microorganisms for the production of industrially important chemicals and for the engineering of human cells to treat medical disorders. It also shows great promise to accelerate the discovery and development of novel secondary metabolites from microorganisms through traditional, engineered, and combinatorial biosynthesis. We anticipate that synthetic biology will continue to have broadening impacts on the biotechnology industry to address ongoing issues of human health, world food supply, renewable energy, and industrial chemicals and enzymes.

Advanced endoscopic imaging: European Society of Gastrointestinal Endoscopy (ESGE) Technology Review.

PubMed

East, James E; Vleugels, Jasper L; Roelandt, Philip; Bhandari, Pradeep; Bisschops, Raf; Dekker, Evelien; Hassan, Cesare; Horgan, Gareth; Kiesslich, Ralf; Longcroft-Wheaton, Gaius; Wilson, Ana; Dumonceau, Jean-Marc

2016-11-01

Background and aim: This technical review is an official statement of the European Society of Gastrointestinal Endoscopy (ESGE). It addresses the utilization of advanced endoscopic imaging in gastrointestinal (GI) endoscopy. Methods: This technical review is based on a systematic literature search to evaluate the evidence supporting the use of advanced endoscopic imaging throughout the GI tract. Technologies considered include narrowed-spectrum endoscopy (narrow band imaging [NBI]; flexible spectral imaging color enhancement [FICE]; i-Scan digital contrast [I-SCAN]), autofluorescence imaging (AFI), and confocal laser endomicroscopy (CLE). The Grading of Recommendations Assessment, Development and Evaluation (GRADE) system was adopted to define the strength of recommendation and the quality of evidence. Main recommendations: 1. We suggest advanced endoscopic imaging technologies improve mucosal visualization and enhance fine structural and microvascular detail. Expert endoscopic diagnosis may be improved by advanced imaging, but as yet in community-based practice no technology has been shown consistently to be diagnostically superior to current practice with high definition white light. (Low quality evidence.) 2. We recommend the use of validated classification systems to support the use of optical diagnosis with advanced endoscopic imaging in the upper and lower GI tracts (strong recommendation, moderate quality evidence). 3. We suggest that training improves performance in the use of advanced endoscopic imaging techniques and that it is a prerequisite for use in clinical practice. A learning curve exists and training alone does not guarantee sustained high performances in clinical practice. (Weak recommendation, low quality evidence.) Conclusion: Advanced endoscopic imaging can improve mucosal visualization and endoscopic diagnosis; however it requires training and the use of validated classification systems. © Georg Thieme Verlag KG Stuttgart · New York.

Advanced information society (8)

NASA Astrophysics Data System (ADS)

Shimoda, Hirotsugu

As technology such as computer, office automation equipments, industrial robots have come into wide use, mental and physical fatigue called technostress as well as health injury has become social issues. Some people attribute this technostress to psychological unrest created by masscommunication or to computer works. On the other hand other people have been conducting investigations of the stress caused by programming works, and gathering information on the related symptoms. The expression and causes of technostress are diverse depending on the kind of computer related labor, therefore, it is necessary to have delicate and detailed countermeasures against it. However, after all technostress is much concerned with individuals' life style and industrial climate.

Advanced Industrial Materials (AIM) Program annual progress report, FY 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-05-01

The Advanced Industrial Materials (AIM) Program is a part of the Office of Industrial Technologies (OIT), Energy Efficiency and Renewable Energy, US Department of Energy (DOE). The mission of AIM is to support development and commercialization of new or improved materials to improve energy efficiency, productivity, product quality, and reduced waste in the major process industries. OIT has embarked on a fundamentally new way of working with industries--the Industries of the Future (IOF) strategy--concentrating on the major process industries that consume about 90% of the energy and generate about 90% of the waste in the industrial sector. These are themore » aluminum, chemical, forest products, glass, metalcasting, and steel industries. OIT has encouraged and assisted these industries in developing visions of what they will be like 20 or 30 years into the future, defining the drivers, technology needs, and barriers to realization of their visions. These visions provide a framework for development of technology roadmaps and implementation plans, some of which have been completed. The AIM Program supports IOF by conducting research and development on materials to solve problems identified in the roadmaps. This is done by National Laboratory/industry/university teams with the facilities and expertise needed to develop new and improved materials. Each project in the AIM Program has active industrial participation and support.« less

Preliminary assessment of industrial needs for an advanced ocean technology

NASA Technical Reports Server (NTRS)

Mourad, A. G.; Maher, K. M.; Balon, J. E.; Coyle, A. G.; Henkener, J. A.

1979-01-01

A quick-look review of selected ocean industries is presented for the purpose of providing NASA OSTA with an assessment of technology needs and market potential. The size and growth potential, needs and problem areas, technology presently used and its suppliers, are given for industries involved in deep ocean mining, petrochemicals ocean energy conversion. Supporting services such as ocean bottom surveying; underwater transportation, data collection, and work systems; and inspection and diving services are included. Examples of key problem areas that are amenable to advanced technology solutions are included. Major companies are listed.

Project T.E.A.M. (Technical Education Advancement Modules). Introduction to Industrial Physics.

ERIC Educational Resources Information Center

Whisenhunt, James E.

This instructional guide, one of a series developed by the Technical Education Advancement Modules (TEAM) project, is a 20-hour introduction to industrial physics that explains and demonstrates to industrial maintenance mechanics the direct relationship of physics to machinery. Project TEAM is intended to upgrade basic technical competencies of…

Recent advances in industrial application of tannases: a review.

PubMed

Beniwal, Vikas; Kumar, Anil; Sharma, Jitender; Chhokar, Vinod

2013-12-01

Tannin acyl hydrolase (E.C. 3.1.1.20) commonly referred as tannase, is a hydrolytic enzyme that catalyses the hydrolysis of ester bonds present in gallotannins, ellagitannins, complex tannins and gallic acid esters. Tannases are the important group of botechnologically relevant enzymes distributed throughout the animal, plant and microbial kingdoms. However, microbial tannases are currently receiving a great deal of attention. Tannases are extensively used in food, feed, pharmaceutical, beverage, brewing and chemical industries. Owing to its diverse area of applications, a number of patents have been appeared in the recent past. The present review pretends to present the advances and perspectives in the industrial application of tannase with special emphasis on patents.

Development of advanced magnetic resonance sensor for industrial applications. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

De Los Santos, A.

1997-06-01

Southwest Research Institute (SwRI) and various subcontractors, in a cooperative agreement with the DOE, have developed and tested an advanced magnetic resonance (MR) sensor for several industrial applications and made various market surveys. The original goal of the program was to develop an advanced moisture sensor to allow more precise and rapid control of drying processes so that energy and/or product would not be wasted. Over the course of the program, it was shown that energy savings were achievable but in many processes the return in investment did not justify the cost of a magnetic resonance sensor. However, in manymore » processes, particularly chemical, petrochemical, paper and others, the return in investment can be very high as to easily justify the cost of a magnetic resonance sensor. In these industries, substantial improvements in product yield, quality, and efficiency in production can cause substantial energy savings and reductions in product wastage with substantial environmental effects. The initial applications selected for this program included measurement of corn gluten at three different points and corn germ at one point in an American Maize corn processing plant. During the initial phases (I and II) of this program, SwRI developed a prototype advanced moisture sensor utilizing NMR technology capable of accurately and reliably measuring moisture in industrial applications and tested the sensor in the laboratory under conditions simulating on-line products in the corn wet milling industry. The objective of Phase III was to test the prototype sensor in the plant environment to determine robustness, reliability and long term stability. Meeting these objectives would permit extended field testing to improve the statistical database used to calibrate the sensor and subject the sensor to true variations in operating conditions encountered in the process rather than those which could only be simulated in the laboratory.« less

Proceedings of the Human Factors Society 35th annual meeting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-01-01

These volumes cover the proceedings of the 35th annual meeting of the Human Factors Society. Topics include: designing for the future of nuclear power plants international perspectives on advanced control room design; human performance assessment in the nuclear power industry; validity of strength tests for predicting endurance of coal miners, psychosocial issues in hazard management and nuclear power plants; and human factors at the DOE's national laboratories.

Technology Challenges and Opportunities in Commercialing Industrial Biotechnology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davison, Brian H.; Lievense, Jeff

Industrial biotechnology is at a pivotal point, with tremendous and ongoing growth in technology contributing to a rich pipeline of opportunities: new products; new and more sustainable ways to make established products; and improvements to existing products and processes. The trillion-dollar questions are: When will there be a commercial breakout in industrial biotech as there has been in biopharma and ag biotech? What advances in technology are needed to make that happen? This article is drawn from the Workshop on Technology Challenges and Opportunities in Commercializing Industrial Biotechnology, sponsored by AIChE’s Society for Biological Engineering (SBE) and held Sept. 28–29,more » 2015, in San Diego. The workshop brought together industrial biotech stakeholders to share — through presentations, case studies, interactive discussions, and exhibits — perspectives on the state of industrial biotech, as well as to address key areas for technology advancement to benefit commercialization.« less

Technology Challenges and Opportunities in Commercialing Industrial Biotechnology

DOE PAGES

Davison, Brian H.; Lievense, Jeff

2016-06-01

Industrial biotechnology is at a pivotal point, with tremendous and ongoing growth in technology contributing to a rich pipeline of opportunities: new products; new and more sustainable ways to make established products; and improvements to existing products and processes. The trillion-dollar questions are: When will there be a commercial breakout in industrial biotech as there has been in biopharma and ag biotech? What advances in technology are needed to make that happen? This article is drawn from the Workshop on Technology Challenges and Opportunities in Commercializing Industrial Biotechnology, sponsored by AIChE’s Society for Biological Engineering (SBE) and held Sept. 28–29,more » 2015, in San Diego. The workshop brought together industrial biotech stakeholders to share — through presentations, case studies, interactive discussions, and exhibits — perspectives on the state of industrial biotech, as well as to address key areas for technology advancement to benefit commercialization.« less

An official American Thoracic Society/European Respiratory Society statement: key concepts and advances in pulmonary rehabilitation.

PubMed

Spruit, Martijn A; Singh, Sally J; Garvey, Chris; ZuWallack, Richard; Nici, Linda; Rochester, Carolyn; Hill, Kylie; Holland, Anne E; Lareau, Suzanne C; Man, William D-C; Pitta, Fabio; Sewell, Louise; Raskin, Jonathan; Bourbeau, Jean; Crouch, Rebecca; Franssen, Frits M E; Casaburi, Richard; Vercoulen, Jan H; Vogiatzis, Ioannis; Gosselink, Rik; Clini, Enrico M; Effing, Tanja W; Maltais, François; van der Palen, Job; Troosters, Thierry; Janssen, Daisy J A; Collins, Eileen; Garcia-Aymerich, Judith; Brooks, Dina; Fahy, Bonnie F; Puhan, Milo A; Hoogendoorn, Martine; Garrod, Rachel; Schols, Annemie M W J; Carlin, Brian; Benzo, Roberto; Meek, Paula; Morgan, Mike; Rutten-van Mölken, Maureen P M H; Ries, Andrew L; Make, Barry; Goldstein, Roger S; Dowson, Claire A; Brozek, Jan L; Donner, Claudio F; Wouters, Emiel F M

2013-10-15

Pulmonary rehabilitation is recognized as a core component of the management of individuals with chronic respiratory disease. Since the 2006 American Thoracic Society (ATS)/European Respiratory Society (ERS) Statement on Pulmonary Rehabilitation, there has been considerable growth in our knowledge of its efficacy and scope. The purpose of this Statement is to update the 2006 document, including a new definition of pulmonary rehabilitation and highlighting key concepts and major advances in the field. A multidisciplinary committee of experts representing the ATS Pulmonary Rehabilitation Assembly and the ERS Scientific Group 01.02, "Rehabilitation and Chronic Care," determined the overall scope of this update through group consensus. Focused literature reviews in key topic areas were conducted by committee members with relevant clinical and scientific expertise. The final content of this Statement was agreed on by all members. An updated definition of pulmonary rehabilitation is proposed. New data are presented on the science and application of pulmonary rehabilitation, including its effectiveness in acutely ill individuals with chronic obstructive pulmonary disease, and in individuals with other chronic respiratory diseases. The important role of pulmonary rehabilitation in chronic disease management is highlighted. In addition, the role of health behavior change in optimizing and maintaining benefits is discussed. The considerable growth in the science and application of pulmonary rehabilitation since 2006 adds further support for its efficacy in a wide range of individuals with chronic respiratory disease.

Planetary Society

NASA Astrophysics Data System (ADS)

Murdin, P.

2000-11-01

Carl Sagan, Bruce Murray and Louis Friedman founded the non-profit Planetary Society in 1979 to advance the exploration of the solar system and to continue the search for extraterrestrial life. The Society has its headquarters in Pasadena, California, but is international in scope, with 100 000 members worldwide, making it the largest space interest group in the world. The Society funds a var...

Advance directives in english and French law: different concepts, different values, different societies.

PubMed

Horn, Ruth Judith

2014-03-01

In Western societies advance directives are widely recognised as important means to extend patient self-determination under circumstances of incapacity. Following other countries, England and France have adopted legislation aiming to clarify the legal status of advance directives. In this paper, I will explore similarities and differences in both sets of legislation, the arguments employed in the respective debates and the socio-political structures on which these differences are based. The comparison highlights how different legislations express different concepts emphasising different values accorded to the duty to respect autonomy and to protect life, and how these differences are informed by different socio-political contexts. Furthermore each country associates different ethical concerns with ADs which raise doubts about whether these directives are a theoretical idea which is hardly applicable in practice.

On Critiquing the Critique: Another Look at the Debate over Mass Society and Popular Culture.

ERIC Educational Resources Information Center

Rosenfeld, Richard

The mass culture critique of advanced industrialized society calls forth such images as an omnipresent media; demagogic politics; a bleak, standardized aesthetic landscape; routinized work; and empty leisure; but the mass culture critique suffers from conceptual ambiguity and a paucity of research. The mass culture critique, from both radical and…

Role of national labs in energy and environmental R & D: An industrial perspective

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vaz, N.

1995-12-31

The perceived role of national laboratories in energy and environmental research and development is examined from an industrial perspective. A series of tables are used to summarize issues primarily related to the automotive industry. Impacts of policy on energy, environment, society, and international competition are outlined. Advances and further needs in automotive efficiency and pollution control, and research roles for national labs and industry are also summarized. 6 tabs.

Advanced high-temperature thermal energy storage media for industrial applications

NASA Astrophysics Data System (ADS)

Clear, T. D.; Weibel, R. T.

An advanced thermal energy storage (TES) media concept based on use of carbonate salt/ceramic composite materials is being developed for industrial process and reject heat applications. This paper describes the composite latent/sensible media concept and its potential advantages over state-of-the-art latent heat systems. Media stability requirements, on-going materials development efforts and planned TES performance evaluation tests are discussed.

Advanced high-temperature thermal energy storage media for industrial applications

NASA Astrophysics Data System (ADS)

Claar, T. D.; Waibel, R. T.

1982-02-01

An advanced thermal energy storage media concept based on use of carbonate salt/ceramic composite materials is being developed for industrial process and reject heat applications. The composite latent/sensible media concept and its potential advantages over state of the art latent heat systems is described. Media stability requirements, on-going materials development efforts, and planned thermal energy storage (TES) performance evaluation tests are discussed.

Proceedings from the 2013 Canadian Nutrition Society Conference on Advances in Dietary Fats and Nutrition.

PubMed

Holub, Bruce; Mutch, David M; Pierce, Grant N; Rodriguez-Leyva, Delfin; Aliani, Michel; Innis, Sheila; Yan, William; Lamarche, Benoit; Couture, Patrick; Ma, David W L

2014-07-01

The science of lipid research continues to rapidly evolve and change. New knowledge enhances our understanding and perspectives on the role of lipids in health and nutrition. However, new knowledge also challenges currently held opinions. The following are the proceedings of the 2013 Canadian Nutrition Society Conference on the Advances in Dietary Fats and Nutrition. Content experts presented state-of-the-art information regarding our understanding of fish oil and plant-based n-3 polyunsaturated fatty acids, nutrigenomics, pediatrics, regulatory affairs, and trans fats. These important contributions aim to provide clarity on the latest advances and opinions regarding the role of different types of fats in health.

Industrialization study, phase 2. [assessment of advanced photovoltaic technologies for commerical development

NASA Technical Reports Server (NTRS)

1979-01-01

The potentials and requirements of advanced photovoltaic technologies still in their early developmental stages were evaluated and compared to the present day single crystal silicon wafer technology and to each other. The major areas of consideration include polycrystalline and amorphous silicon, single crystal and polycrystalline gallium arsenide, and single crystal and polycrystalline cadmium sulfide. A rank ordering of the advanced technologies is provided. The various ranking schemes were based upon present-day efficiency levels, their stability and long-term reliability prospects, material availability, capital investments both at the laboratory and production level, and associated variable costs. An estimate of the timing of the possible readiness of these advanced technologies for technology development programs and industrialization is presented along with a set of recommended government actions concerning the various advanced technologies.

Advances in integrated system heath management system technologies : overview of NASA and industry collaborative activities

NASA Technical Reports Server (NTRS)

Dixit, Sunil; Brown, Steve; Fijany, Amir; Park, Han; Mackey, Ryan; James, Mark; Baroth, Ed

2005-01-01

This paper will describe recent advances in ISHM technologies made through collaboration between NASA and industry. In particular, the paper will focus on past, present, and future technology development and maturation efforts at the Jet Propulsion Laboratory (JPL) and its industry partner, Northrop Grumman lntegrated Systems (NGIS).

Retention and Advancement in the Retail Industry: A Career Ladder Approach.

ERIC Educational Resources Information Center

Prince, Heath J.

Retailing is the largest industry in the United States, employing roughly 18 percent of the total labor force. However, high turnover resulting from low wages in entry-level positions and the perceptions of retail workers that job security is far from certain and that advancement potential is limited have resulted in low levels of employee…

Advanced information society (9)

NASA Astrophysics Data System (ADS)

Kamata, Hiroki

This article discusses the U.S. and European national strategies and policies for information society. Coping with the declining competitiveness in high-tech products and Japanese technological advantages both have been trying hard to strengthen technology base and to deregulate the telecommunications services markets. The U.S. approach in 1980's, unlike its liberalist principle, has been characterized by technological protectlonism and defense-oriented policies. European Communities' approach has been more comprehensive and systematic, investing heavily telecommunication infrastructure, deregulating domestic market, and promoting cooperation of member countries. However, both of these approaches have, so far, been unable to achieve a considerable success.

Advanced Communications Technology Satellite (ACTS) Experiments Program - A market-driven approach to government/industry cooperation

NASA Astrophysics Data System (ADS)

Olmstead, Dean A.; Schertler, Ronald R.; Randall, Laura A.

1992-03-01

The Advanced Communications Technology Satellite (ACTS), now under development and scheduled for launch in early 1993, is the current focus of NASA's commercial communications satellite program. The full power of the key technologies on ACTS can only be realized if industry assumes an active role in the conduct of experiments and demonstrations. This paper discusses the current market-driven rationale behind the ACTS Experiments Program activities aimed at getting industry involved - a rationale that addresses industry concerns and responds to industry inputs.

Advancing Research on Productive Aging Activities in Greater Chinese Societies.

PubMed

Lum, Terry Yat-Sang

2013-06-01

The public discourse on productive aging as a research and policy initiative has just begun in greater China. Two conferences in Mainland China in 2009 and 2011 and subsequent conferences in Taiwan and Hong Kong in 2012 have set it in motion. Because applied social science research has just started in greater China, researchers in Chinese societies will benefit from the experience and rich literature accumulated over the last three decades in the West. In this paper, I review and reflect on the research methods used in productive aging research in both Chinese societies and in the West. I believe that to advance productive aging research in greater China, we need to (1) discuss and agree upon a definition of productive aging, (2) identify and differentiate outputs and outcomes of productive aging activities in greater China, (3) develop precise measures for productive aging involvement, (4) focus on institutional (program and public policy) factors that promote productive aging involvement, (5) use a strong research design (such as a quasi-experimental design) to establish the internal validity of productive aging programs, and (6) be theory-driven. Lastly, productive aging should be seen as a choice, not an obligation for older people; otherwise, the productive aging agenda will be seen as exploiting older people. It is important that Chinese researchers and policy-makers have this in mind when they are advocating productive engagement of older people in China.

Advanced information society (11)

NASA Astrophysics Data System (ADS)

Nawa, Kotaro

Late in the 1980's the information system of Japanese corporation has been operated strategically to strengthen its competitive position in markets rather than to make corporate management efficient. Therefore, information-oriented policy in the corporation is making remarkable progress. This policy expands the intelligence activity in the corporation and also leads to the extension of the market in an information industry. In this environment closed corporate system is transformed into open one. For this system network and database are important managerial resources.

The Theory of Industrial Society and Cultural Schemata: Does the "Cultural Myth of Stigma" Underlie the WHO Schizophrenia Paradox?

PubMed

Pescosolido, Bernice A; Martin, Jack K; Olafsdottir, Sigrun; Long, J Scott; Kafadar, Karen; Medina, Tait R

2015-11-01

The WHO's International Studies of Schizophrenia conclude that schizophrenia may have a more benign course in "developing" societies than in the West. The authors focus on this finding's most common corollary: cultural schemata are shaped by the transition from agrarian to industrial society. Developing societies are viewed as traditional, gemeinschaft cultures lacking the stigmatizing beliefs about persons with mental illness held in modern, gesellschaft cultures of developed societies. The Stigma in Global Context-Mental Health Study formalized the cultural myth of public stigma (CMPS) with propositions linking level of development to intolerant, exclusionary, and individualistic attitudes. In 17 countries, the authors find no support for the corollary; where support is found, the findings are opposite expectations, with developed societies reporting lower stigma levels. Reconceptualizing of the cultural landscape on more specific dimensions also produces null or contrary findings. This correction to nostalgic myths of cultural context in developing societies thwarts misguided treatment, policy, and stigma-reduction efforts.

[Mutual aid societies for industrial accidents and occupational diseases in the social security service within the framework of the Prevention of Occupational Risk Act].

PubMed

Albalá-Ortiz, M

The passing of the Prevention of Industrial Risks Act, in force from 9 February 1996 has altered previous ideas on the subject, which is currently considered to be of utmost importance for national and community legislation. In this article we describe the preventive functions of the Mutual Aid Societies for Industrial Accidents and professional diseases of the National Health Service. We have analysed the current legislation so as to clarify the activities of the Mutual Aid Societies in the field of the prevention of industrial accidents, and have defined the actions which may be taken in this field according to the present laws. Two different types of preventive activities are considered: (1) Those which depend on contributions, included in the professional risks cover, and which are obliged to prepare an annual plan of the measures taken to prevent industrial accidents and professional illness, following the guidelines established by the Ministry of Labor and Social Services and according to certain priorities. (2) The functions corresponding to the services for third-party prevention exclusively for their associated companies when the Mutual Aid Society is approved as a service for third party cover. This requires a voluntary or professional contract and the financial cost is borne by the company which requests it. The objective of the current legislation is, amongst other things, to introduce the new preventive approach established by the Prevention of Industrial Risks Act in the workplace and through the Mutual Aid Societies as well as to foment a new culture of prevention.

Guidelines on Chemotherapy in Advanced Stage Gynecological Malignancies: An Evaluation of 224 Professional Societies and Organizations

PubMed Central

Polyzos, Nikolaos P.; Mauri, Davide; Ioannidis, John P. A.

2011-01-01

Background Clinical practice guidelines are important for guiding practice, but it is unclear if they are commensurate with the available evidence. Methods We examined guidelines produced by cancer and gynecological societies and organizations and evaluated their coverage of and stance towards chemotherapy for advanced stage disease among 4 gynecological malignancies (breast, ovarian, cervical, endometrial cancer) where the evidence for the use of chemotherapy is very different (substantial and conclusive for breast and ovarian cancer, limited and suggesting no major benefit for cervical and endometrial cancer). Eligible societies and organizations were identified through systematic internet searches (last update June 2009). Pertinent websites were scrutinized for presence of clinical practice guidelines, and relative guidelines were analyzed. Results Among 224 identified eligible societies and organizations, 69 (31%) provided any sort of guidelines, while recommendations for chemotherapy on advanced stage gynecological malignancies were available in 20 of them. Only 14 had developed their own guideline, and only 5 had developed guidelines for all 4 malignancies. Use of levels of evidence and grades of recommendations, and aspects of the production, implementation, and timeliness of the guidelines did not differ significantly across malignancies. Guidelines on breast and ovarian cancer utilized significantly more randomized trials and meta-analyses. Guidelines differed across malignancies on their coverage of disease-free survival (p = 0.033), response rates (p = 0.024), symptoms relief (p = 0.005), quality of life (p = 0.001) and toxicity (p = 0.039), with breast and ovarian cancer guidelines typically covering more frequently these outcomes. All guidelines explicitly or implicitly endorsed the use of chemotherapy. Conclusions Clinical practice guidelines are provided by the minority of professional societies and organizations. Available

Physician-industry relations. Part 1: individual physicians.

PubMed

Coyle, Susan L

2002-03-05

This is part 1 of a 2-part paper on ethics and physician-industry relationships. Part 1 offers advice to individual physicians; part 2 gives recommendations to medical education providers and medical professional societies. Physicians and industry have a shared interest in advancing medical knowledge. Nonetheless, the primary ethic of the physician is to promote the patient's best interests, while the primary ethic of industry is to promote profitability. Although partnerships between physicians and industry can result in impressive medical advances, they also create opportunities for bias and can result in unfavorable public perceptions. Many physicians and physicians-in-training think they are impervious to commercial influence. However, recent studies show that accepting industry hospitality and gifts, even drug samples, can compromise judgment about medical information and subsequent decisions about patient care. It is up to the physician to judge whether a gift is acceptable. A very general guideline is that it is ethical to accept modest gifts that advance medical practice. It is clearly unethical to accept gifts or services that obligate the physician to reciprocate. Conflicts of interest can arise from other financial ties between physicians and industry, whether to outside companies or self-owned businesses. Such ties include honorariums for speaking or writing about a company's product, payment for participating in clinic-based research, and referrals to medical resources. All of these relationships have the potential to influence a physician's attitudes and practices. This paper explores the ethical quandaries involved and offers guidelines for ethical business relationships.

Emerging Careers: Occupations for Post-Industrial Society.

ERIC Educational Resources Information Center

Feingold, S. Norman

1984-01-01

The future holds in store a multitude of exciting new occupations, from treasure hunting to moon mining. Discussed are future careers in many areas, including the information industry, ocean industry, robotics, health, energy, and small business. Future occupational titles are listed and 54 ways to get a job are discussed. (RM)

Career advancement opportunities and the ACVP/STP Coalition.

PubMed

Cockerell, Gary

2014-07-01

A new service to facilitate career advancement opportunities has been implemented by the American College of Veterinary Pathologists (ACVP)/Society of Toxicologic Pathology (STP) Coalition for Veterinary Pathology Fellows. This service will allow rapid communication of these opportunities between veterinary pathologists in academia, industry, and government, and will be useful to trainees as well as established pathologists. © 2014 by The Author(s).

Industrialization of Biology. A Roadmap to Accelerate the Advanced Manufacturing of Chemicals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Friedman, Douglas C.

The report stresses the need for efforts to inform the public of the nature of industrial biotechnology and of its societal benefits, and to make sure that concerns are communicated effectively between the public and other stakeholders. In addition to scientific advances, a number of governance and societal factors will influence the industrialization of biology. Industry norms and standards need to be established in areas such as read/write accuracy for DNA, data and machine technology specifications, and organism performance in terms of production rates and yields. An updated regulatory regime is also needed to accelerate the safe commercialization of newmore » host organisms, metabolic pathways, and chemical products, and regulations should be coordinated across nations to enable rapid, safe, and global access to new technologies and products.« less

[Economic evaluation for the prevention of cervical cancer by vaccination--from perspective of health insurance society and industry].

PubMed

Kawabayashi, Yukari; Furuno, Makoto; Uchida, Marina; Kawana, Takashi

2013-04-01

The aim of this study is to estimate the budget impact in a health insurance society and an industry of promoting decision-making for endowing grants for vaccination as prophylaxis against cervical cancer (CC) by the health insurance society for employees. The target population was Japanese female employees aged 20 to 34 and partners and daughters of male employees working for an overseas IT industry. By using a prevalence-based model, the author estimated expected costs in non-vaccination and vaccination scenarios and evaluated the 10-year financial impact on the industry after vaccination by employing a cost-benefit analysis. The incidence of CC in a target group was derived from the actual number of patients with CC in addition to data from JMDC's receipt database and estimated by a Bayesian method. The epidemiological parameters such as mortality rate, screening rate, detailed exam rate and detailed exam consultation rate were taken from epidemiology statistics and published articles available in Japan. Healthcare costs for cancer treatment, screening, detailed exam and vaccination estimated based on medical fee points were input into the model, 'but the analysis did not consider side effect-related costs. In addition, productivity costs for mortality in employees and their families due to CC, estimated by the national employee's statistics, were also input into the model. An annual discount was unconsidered. From the perspective of the healthcare insurance society, expenditure of approximately 129 million yen in the non-vaccination scenario was expected for ten years, but healthcare-related costs were saved by expenditure of approximately 73 million yen with 100% of employees and their families being vaccinated at expenses of approximately 55 million yen. The insurance society lost approximately 1.8 million yen in total if subsidy for vaccination was set at ten thousand yen. In the case of a 100% vaccination rate, the company can save losses in productivity of

The History of Geriatric Anesthesia in the United States and the Society for the Advancement of Geriatric Anesthesia.

PubMed

Rooke, G Alec

2015-09-01

Creation of the American Society of Anesthesiologists Committee on Geriatric Anesthesia provided an opportunity for individuals to interact, strategize, and work with medical organizations outside of anesthesiology. These opportunities expanded with creation of the Society for the Advancement of Geriatric Anesthesia. The American Geriatrics Society provided a major boost when they realized it was important for surgical and related specialties to take an active role in the care of older patients. From this have come educational grants to improve residency training and establishment of a major research grant program now managed by the National Institutes of Health. Nevertheless, for improved care of the older patient, the level of involvement has to increase. Copyright © 2015 Elsevier Inc. All rights reserved.

The Relation between Handedness Indices and Reproductive Success in a Non-Industrial Society

PubMed Central

Schaafsma, Sara M.; Geuze, Reint H.; Lust, Jessica M.; Schiefenhövel, Wulf; Groothuis, Ton G. G.

2013-01-01

The evolution of handedness in human populations has intrigued scientists for decades. However, whether handedness really affects Darwinian fitness is unclear and not yet studied in a non-industrial society where selection pressures on health and handedness are likely to be similar to the situation in which handedness has evolved. We measured both hand preference and asymmetry of hand skill (speed of fine motor control, measured by a pegboard task, and accuracy of throwing), as they measure different aspects of handedness. We investigated the associations between both the direction (left versus right) and strength (the degree to which a certain preference or asymmetry in skill is manifested, independent of the direction) of handedness. We analyzed to what extent these measures predict the number of offspring and self-reported illness in a non-industrial society in Papua, Indonesia. As it is known that body height and fitness are correlated, data on body height was also collected. Due to low numbers of left-handers we could not investigate the associations between direction of hand preference and measures of Darwinian fitness. We found a positive association between strength of asymmetry of hand skill (pegboard) and the number of children men sired. We also found a positive association for men between strength of hand preference and number of children who died within the first three years of life. For women we found no such effects. Our results may indicate that strength of handedness, independent of direction, has fitness implications and that the persistence of the polymorphism in handedness may be ascribed to either balancing selection on strength of asymmetry of hand skill versus strength of hand preference, or sexual antagonistic selection. No relationships between health and handedness were found, perhaps due to disease related selective disappearance of subjects with a specific handedness. PMID:23704893

To advance and diffuse the knowledge of physics: An account of the one-hundred-year history of the American Physical Society

NASA Astrophysics Data System (ADS)

Lustig, Harry

2000-07-01

On May 20, 1899, thirty-six physicists founded the American Physical Society. A hundred years later, 11,239 scientists—the Society had by then 41,786 members—gathered to mark both a century of physics and the centennial of the Society. How the APS came about and developed, how it pursued its mission—the advancement and diffusion of the knowledge of physics—through its meetings, journals, and public activities, who its leaders were, and what it looks like today, is the subject of this article.

American Head and Neck Society

MedlinePlus

American Head & Neck Society Mission Statement: Advance Education, Research, and Quality of Care for the head and neck oncology patient. American Head & Neck Society | AHNS The mission of the AHNS is ...

Aspects of Migration in an Advanced Industrial Society.

ERIC Educational Resources Information Center

Wilson, Franklin D.

This paper evaluates the hypothesis that patterns of migration within and between the metropolitan and nonmetropolitan sectors and between regions, and migrant/nonmigrant differentials in education attainment during the 1935-1980 period of United States history reflect historical differences in socioeconomic development and settlement patterns.…

Trajectories of development in Third World societies.

PubMed

Lenski, G

1985-01-01

A test of ecological-evolutionary theory shows that historic differences in the modes of production of Third World countries have important consequences for these countries today. Those with an agrarian heritage are more highly developed and enjoy higher rates of economic growth than those with a horticultural heritage. Horticultural societies are less developed than agrarian ones. Horticultural societies are ones in which the basic farming implements are the hoe and the digging stick, tools less powerful than the plow, which is the basic farming tool of agrarian societies. The authors examine 30 socioeconomic indicators for 77 Third World countries, of which 32 were classified as industrializing horticultural and 45 as industrializing agrarian. Industrializing agrarian societies have been much more successful in controlling their population growth than have industrializing horticultural societies. The data suggest that the 2 types of societies not only started out differently, but are still diverging, in both rates of population growth and in gross national product per capita. Most of the sample of horticultural societies were recently colonies, and many of the agrarian ones were not. Almost all of the horticultural societies are in sub-Saharan Africa, which gives rise to the question of whether these findings only reflect geographic factors. However, Papua-New Guinea and Haiti also show the same pattern of results. It may be that such material factors as climate, soil, and disease express themselves in different modes of production, showing that the past is not dead history but living material that influences the life of societies in later centuries.

Rethinking healthcare as a safety--critical industry.

PubMed

Lwears, Robert

2012-01-01

The discipline of ergonomics, or human factors engineering, has made substantial contributions to both the development of a science of safety, and to the improvement of safety in a wide variety of hazardous industries, including nuclear power, aviation, shipping, energy extraction and refining, military operations, and finance. It is notable that healthcare, which in most advanced societies is a substantial sector of the economy (eg, 15% of US gross domestic product) and has been associated with large volumes of potentially preventable morbidity and mortality, has heretofore not been viewed as a safety-critical industry. This paper proposes that improving safety performance in healthcare must involve a re-envisioning of healthcare itself as a safety-critical industry, but one with considerable differences from most engineered safety-critical systems. This has implications both for healthcare, and for conceptions of safety-critical industries.

Vermicomposting as an advanced biological treatment for industrial waste from the leather industry.

PubMed

Nunes, Ramom R; Bontempi, Rhaissa M; Mendonça, Giovane; Galetti, Gustavo; Rezende, Maria Olímpia O

2016-01-01

The leather industry (tanneries) generates high amounts of toxic wastes, including solid and liquid effluents that are rich in organic matter and mineral content. Vermicomposting was studied as an alternative method of treating the wastes from tanneries. Vermicompost was produced from the following tannery residues: tanned chips of wet-blue leather, sludge from a liquid residue treatment station, and a mixture of both. Five hundred earthworms (Eisenia fetida) were added to each barrel. During the following 135 days the following parameters were evaluated: pH, total organic carbon (TOC), organic matter (OM), cation exchange capacity (CEC), C:N ratio, and chromium content as Cr (III) and Cr (VI). The results for pH, TOC and OM contents showed decreases in their values during the composting process, whereas values for CEC and total nitrogen rose, indicating that the vermicompost reached maturity. For chromium, at 135 days, all values of Cr (VI) were below the detectable level. Therefore, the Cr (VI) content had probably been biologically transformed into Cr (III), confirming the use of this technique as an advanced biological treatment. The study reinforces the idea that vermicomposting could be introduced as an effective technology for the treatment of industrial tannery waste and the production of agricultural inputs.

The Important Role of Physics in Industry and Economic Development

NASA Astrophysics Data System (ADS)

Alvarado, Igor

2012-10-01

Good Physics requires good education. Good education translates into good Physics professionals. The process starts early with Science, Technology, Engineering and Mathematics (STEM) education programs for Middle and High-School students. Then it continues with competitive higher education programs (2 years and 4 years) at colleges and universities designed to satisfy the needs of industry and academia. The research work conducted by graduate students in Physics (and Engineering Physics) frequently translates into new discoveries and innovations that have direct impact in society (e.g. Proton Cancer Therapy). Some of the major and largest scientific experiments in the world today are physics-centered (e.g. Large Hadron Collider-LHC) that generate employment and business opportunities for thousands of scientists, academic research groups and companies from around the world. New superconducting magnets and advanced materials that have resulted from previous research in physics are commonly used in these extreme experiments. But not all physicists will end up working at these large high-energy physics experiments, universities or National Laboratories (e.g. Fermilab); industry requires new generations of (industrial) physicists in such sectors as semiconductor, energy, space, life sciences, defense and advanced manufacturing. This work presents an industry perspective about the role of Physics in economic development and the need for a collaborative Academic-Industry approach for a more effective translational research. A series of examples will be presented with emphasis in the measurement, control, diagnostics and computing capabilities needed to translate the science (physics) into innovations and practical solutions that can benefit society as a whole.

Did Educational Expansion Trigger the Development of an Education Society? Chances and Risks of a New Model of Society

ERIC Educational Resources Information Center

Haunberger, Sigrid

2010-01-01

This article focuses on the question of whether educational expansion leads to a new type of society, the education society. Taking into consideration the combined elements of three models of society (the post-industrial society, the knowledge society and the information society)--the chances and risks of an educational society will be elicited…

Advancement of Tools Supporting Improvement of Work Safety in Selected Industrial Company

NASA Astrophysics Data System (ADS)

Gembalska-Kwiecień, Anna

2018-03-01

In the presented article, the advancement of tools to improve the safety of work in the researched industrial company was taken into consideration. Attention was paid to the skillful analysis of the working environment, which includes the available technologies, work organization and human capital. These factors determine the development of the best prevention activities to minimize the number of accidents.

Advanced oxidation-based treatment of furniture industry wastewater.

PubMed

Tichonovas, Martynas; Krugly, Edvinas; Grybauskas, Arturas; Jankūnaitė, Dalia; Račys, Viktoras; Martuzevičius, Dainius

2017-07-16

The paper presents a study on the treatment of the furniture industry wastewater in a bench scale advanced oxidation reactor. The researched technology utilized a simultaneous application of ozone, ultraviolet radiation and surface-immobilized TiO 2 nanoparticle catalyst. Various combinations of processes were tested, including photolysis, photocatalysis, ozonation, catalytic ozonation, photolytic ozonation and photocatalytic ozonation were tested against the efficiency of degradation. The efficiency of the processes was primarily characterized by the total organic carbon (TOC) analysis, indicating the remaining organic material in the wastewater after the treatment, while the toxicity changes in wastewater were researched by Daphnia magna toxicity tests. Photocatalytic ozonation was confirmed as the most effective combination of processes (99.3% of TOC reduction during 180 min of treatment), also being the most energy efficient (4.49-7.83 MJ/g). Photocatalytic ozonation and photolytic ozonation remained efficient across a wide range of pH (3-9), but the pH was an important factor in photocatalysis. The toxicity of wastewater depended on the duration of the treatment: half treated water was highly toxic, while fully treated water did not possess any toxicity. Our results indicate that photocatalytic ozonation has a high potential for the upscaling and application in industrial settings.

Research Advances of Microencapsulation and Its Prospects in the Petroleum Industry

PubMed Central

Hu, Miaomiao; Guo, Jintang; Yu, Yongjin; Cao, Lei; Xu, Yang

2017-01-01

Additives in the petroleum industry have helped form an efficient system in the past few decades. Nowadays, the development of oil and gas has been facing more adverse conditions, and smart response microcapsules with the abilities of self-healing, and delayed and targeted release are introduced to eliminate obstacles for further exploration in the petroleum industry. However, limited information is available, only that of field measurement data, and not mechanism theory and structural innovation data. Thus we propose that the basic type, preparation, as well as mechanism of microcapsules partly depend on other mature fields. In this review, we explore the latest advancements in evaluating microcapsules, such as X-ray computed tomography (XCT), simulation, and modeling. Finally, some novel microencapsulated additives with unparalleled advantages, such as flexibility, efficiency, and energy-conservation are described. PMID:28772728

Advanced computational tools for 3-D seismic analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barhen, J.; Glover, C.W.; Protopopescu, V.A.

1996-06-01

The global objective of this effort is to develop advanced computational tools for 3-D seismic analysis, and test the products using a model dataset developed under the joint aegis of the United States` Society of Exploration Geophysicists (SEG) and the European Association of Exploration Geophysicists (EAEG). The goal is to enhance the value to the oil industry of the SEG/EAEG modeling project, carried out with US Department of Energy (DOE) funding in FY` 93-95. The primary objective of the ORNL Center for Engineering Systems Advanced Research (CESAR) is to spearhead the computational innovations techniques that would enable a revolutionary advancemore » in 3-D seismic analysis. The CESAR effort is carried out in collaboration with world-class domain experts from leading universities, and in close coordination with other national laboratories and oil industry partners.« less

Eco-Driven Chemical Research in the Boundary Between Academia and Industry. PhD Students' Views on Science and Society

NASA Astrophysics Data System (ADS)

Sjöström, Jesper

2013-10-01

This paper examines and discusses the views on science and society held among PhD students working in two different industrially and environmentally driven research programmes in the broad area of green chemistry. It is based on thirteen in-depth interviews. The analysis shows three main ways of handling the situation as "post-academic" PhD student: (1) the student sees the PhD work mainly as a job and does not reflect about his/her research or the research funding, (2) the student is satisfied with the post-academic situation, accepts the established innovation policy discourse and is sceptical to traditional academic research, and (3) the student sees collaborative research programmes as a way to get funding, which can be used for secretly done basic research. Most PhD students either emphasise usefulness—in line with the dominating research policy discourse—or they adopt the positivistic view of science as objective and independent of the surrounding society. However, there are only a few signs of "double problematisation", that is a critical view where both disciplinary-oriented and industry-dependent research are problematised.

The Challenges of a Post-Industrial Society.

ERIC Educational Resources Information Center

Quilling, Joan I.

1982-01-01

Postindustrialism often describes societies which deemphasize agriculture and manufacturing while emphasizing information processing. There are five stages to postindustrialization: (1) mining, agriculture; (2) manufactured goods; (3) transportation, communication, public services; (4) commerce; and (5) abstract activities. The United States is in…

The Theory of Industrial Society and Cultural Schemata: Does the “Cultural Myth of Stigma” Underlie the WHO Schizophrenia Paradox?

PubMed Central

Pescosolido, Bernice A.; Martin, Jack K.; Olafsdottir, Sigrun; Long, J. Scott; Kafadar, Karen; Medina, Tait R.

2015-01-01

The “Better Prognosis Hypothesis” stems from World Health Organization studies known as the International Studies of Schizophrenia (ISoS). Despite greater availability and sophistication of treatment options in the West, schizophrenia appears to have a more benign course and better outcomes in “developing” societies. We focus on this finding's most common corollary: a simplified version of sociological notions of cultural reality shaped by the transition from agrarian to industrial society. Developing societies are viewed as traditional, gemeinschaft cultures that neither develop nor endorse stigmatizing attitudes and beliefs about persons with mental illness that exist in modern, gesellschaft cultures of developed societies. Using the Stigma in Global Context-Mental Health Study (SGC-MHS), we formalize the “Cultural Myth of Stigma,” propositions linking level of development to intolerant, exclusionary, and individualistic attitudes. In 17 countries, we find no support for the corollary. Where significant associations are documented, the findings are opposite expectations: the public in more developed societies reports lower stigma levels. Extensions to reconceptualizations of the cultural landscape also reveal null or contrary findings. This correction to nostalgic myths of cultural context in developing societies thwarts misguided treatment, policy, and stigma-reduction efforts. PMID:26640277

Universities at the Crossroads: Industry or Society Driven?

ERIC Educational Resources Information Center

Nathan, Robert Jeyakumar; Siang, Terence Tan Gek; Shawkataly, Omar

2013-01-01

Higher education is viewed as part of the national agenda in transforming Malaysia into a high-income nation. This has resulted in a sky-rocketing number of graduates in Malaysia's recent history. Industry relies on higher education as the source of skilled employees, and it is important for industry to attract and retain talented employees in…

European Society of Gynaecologic Oncology Quality Indicators for Advanced Ovarian Cancer Surgery.

PubMed

Querleu, Denis; Planchamp, François; Chiva, Luis; Fotopoulou, Christina; Barton, Desmond; Cibula, David; Aletti, Giovanni; Carinelli, Silvestro; Creutzberg, Carien; Davidson, Ben; Harter, Philip; Lundvall, Lene; Marth, Christian; Morice, Philippe; Rafii, Arash; Ray-Coquard, Isabelle; Rockall, Andrea; Sessa, Cristiana; van der Zee, Ate; Vergote, Ignace; du Bois, Andreas

2016-09-01

The surgical management of advanced ovarian cancer involves complex surgery. Implementation of a quality management program has a major impact on survival. The goal of this work was to develop a list of quality indicators (QIs) for advanced ovarian cancer surgery that can be used to audit and improve the clinical practice. This task has been carried out under the auspices of the European Society of Gynaecologic Oncology (ESGO). Quality indicators were based on scientific evidence and/or expert consensus. A 4-step evaluation process included a systematic literature search for the identification of potential QIs and the documentation of scientific evidence, physical meetings of an ad hoc multidisciplinarity International Development Group, an internal validation of the targets and scoring system, and an external review process involving physicians and patients. Ten structural, process, or outcome indicators were selected. Quality indicators 1 to 3 are related to achievement of complete cytoreduction, caseload in the center, training, and experience of the surgeon. Quality indicators 4 to 6 are related to the overall management, including active participation to clinical research, decision-making process within a structured multidisciplinary team, and preoperative workup. Quality indicator 7 addresses the high value of adequate perioperative management. Quality indicators 8 to 10 highlight the need of recording pertinent information relevant to improvement of quality. An ESGO-approved template for the operative report has been designed. Quality indicators were described using a structured format specifying what the indicator is measuring, measurability specifications, and targets. Each QI was associated with a score, and an assessment form was built. The ESGO quality criteria can be used for self-assessment, for institutional or governmental quality assurance programs, and for the certification of centers. Quality indicators and corresponding targets give

A commentary on decision-making and organisational legitimacy in the Risk Society.

PubMed

Benn, Suzanne; Brown, Paul; North-Samardzic, Andrea

2009-04-01

Key concepts of Risk Society as elaborated by Ulrich Beck and others (Beck, U., 1992 (trans. Mark Ritter). The Risk Society. Sage Publications, London. Beck, U., 1995, Ecological Politics in the Age of Risk. Polity Press, Cambridge. Beck, U., 1999, World Risk Society. Polity Press, Cambridge. Giddens, A., 1994, Beyond Left and Right. Polity Press, Oxford. Beck, U., Giddens, A. and Lash, S., 1994, Reflexive Modernisation: Politics, Tradition and Aesthetics in the Modern Social Order. Stanford University Press, Stanford. Beck, U., Bonss, W. and Lau, C., 2003, Theory, Culture & Society 2003, Sage, London, 20(2), pp. 1-33.) are illuminated though a case study of managed environmental risk, namely the hexachlorobenzene (HCB) controversy at Botany, a southeast suburb of Sydney. We observe the way multiple stakeholder decision-making plays out a number of Risk Society themes, including the emergence of 'unbounded risk' and of highly 'individualised' and 'reflexive' risk communities. Across several decades, the events of the HCB story support Risk Society predictions of legitimacy problems faced by corporations as they harness technoscientific support for innovation in their products and industrial processes without due recognition of social and environmental risk. Tensions involving identity, trust and access to expert knowledge advance our understanding of democratic 'sub-political' decision-making and ways of distributing environmental risk.

Treatment of industrial wastewater effluents using hydrodynamic cavitation and the advanced Fenton process.

PubMed

Chakinala, Anand G; Gogate, Parag R; Burgess, Arthur E; Bremner, David H

2008-01-01

For the first time, hydrodynamic cavitation induced by a liquid whistle reactor (LWR) has been used in conjunction with the advanced Fenton process (AFP) for the treatment of real industrial wastewater. Semi-batch experiments in the LWR were designed to investigate the performance of the process for two different industrial wastewater samples. The effect of various operating parameters such as pressure, H2O2 concentration and the initial concentration of industrial wastewater samples on the extent of mineralization as measured by total organic carbon (TOC) content have been studied with the aim of maximizing the extent of degradation. It has been observed that higher pressures, sequential addition of hydrogen peroxide at higher loadings and lower concentration of the effluent are more favourable for a rapid TOC mineralization. In general, the novel combination of hydrodynamic cavitation with AFP results in about 60-80% removal of TOC under optimized conditions depending on the type of industrial effluent samples. The combination described herein is most useful for treatment of bio-refractory materials where the diminution in toxicity can be achieved up to a certain level and then conventional biological oxidation can be employed for final treatment. The present work is the first to report the use of a hydrodynamic cavitation technique for real industrial wastewater treatment.

Indian Vacuum Society: The Indian Vacuum Society

NASA Astrophysics Data System (ADS)

Saha, T. K.

2008-03-01

The Indian Vacuum Society (IVS) was established in 1970. It has over 800 members including many from Industry and R & D Institutions spread throughout India. The society has an active chapter at Kolkata. The society was formed with the main aim to promote, encourage and develop the growth of Vacuum Science, Techniques and Applications in India. In order to achieve this aim it has conducted a number of short term courses at graduate and technician levels on vacuum science and technology on topics ranging from low vacuum to ultrahigh vacuum So far it has conducted 39 such courses at different parts of the country and imparted training to more than 1200 persons in the field. Some of these courses were in-plant training courses conducted on the premises of the establishment and designed to take care of the special needs of the establishment. IVS also regularly conducts national and international seminars and symposia on vacuum science and technology with special emphasis on some theme related to applications of vacuum. A large number of delegates from all over India take part in the deliberations of such seminars and symposia and present their work. IVS also arranges technical visits to different industries and research institutes. The society also helped in the UNESCO sponsored post-graduate level courses in vacuum science, technology and applications conducted by Mumbai University. The society has also designed a certificate and diploma course for graduate level students studying vacuum science and technology and has submitted a syllabus to the academic council of the University of Mumbai for their approval, we hope that some colleges affiliated to the university will start this course from the coming academic year. IVS extended its support in standardizing many of the vacuum instruments and played a vital role in helping to set up a Regional Testing Centre along with BARC. As part of the development of vacuum education, the society arranges the participation of

Relations between professional medical associations and healthcare industry, concerning scientific communication and continuing medical education: a policy statement from the European Society of Cardiology.

PubMed

2012-01-01

Physicians have an ethical duty to keep up-to-date with current knowledge. Professional medical associations such as the European Society of Cardiology (ESC) support these obligations. In Europe, the costs of continuing medical education (CME) are insufficiently supported from governments and employers; however, medical associations have been criticized for accepting alternative financial support from industry. Medical education and training in research include learning how to assess the quality and reliability of any information. There is some risk of bias in any form of scientific communication including intellectual, professional, and financial and it is essential that in particular, the latter must be acknowledged by full disclosure. It is essential that there is strong collaboration between basic and clinical researchers from academic institutions on the one hand, with engineers and scientists from the research divisions of device and pharmaceutical companies on the other. This is vital so that new diagnostic methods and treatments are developed. Promotion of advances by industry may accelerate their implementation into clinical practice. Universities now frequently exhort their academic staff to protect their intellectual property or commercialize their research. Thus, it is not commercial activity or links per se that have become the target for criticism but the perceived influence of commercial enterprises on clinical decision-making or on messages conveyed by professional medical organizations. This document offers the perspective of the ESC on the current debate, and it recommends how to minimize bias in scientific communications and CME and how to ensure proper ethical standards and transparency in relations between the medical profession and industry. Copyright © 2012. Published by Elsevier España.

Clinical cancer advances 2007: major research advances in cancer treatment, prevention, and screening--a report from the American Society of Clinical Oncology.

PubMed

Gralow, Julie; Ozols, Robert F; Bajorin, Dean F; Cheson, Bruce D; Sandler, Howard M; Winer, Eric P; Bonner, James; Demetri, George D; Curran, Walter; Ganz, Patricia A; Kramer, Barnett S; Kris, Mark G; Markman, Maurie; Mayer, Robert J; Raghavan, Derek; Ramsey, Scott; Reaman, Gregory H; Sawaya, Raymond; Schuchter, Lynn M; Sweetenham, John W; Vahdat, Linda T; Davidson, Nancy E; Schilsky, Richard L; Lichter, Allen S

2008-01-10

A MESSAGE FROM ASCO'S PRESIDENT: For the third year, the American Society of Clinical Oncology (ASCO) is publishing Clinical Cancer Advances: Major Research Advances in Cancer Treatment, Prevention, and Screening, an annual review of the most significant cancer research presented or published over the past year. ASCO publishes this report to demonstrate the important progress being made on the front lines of clinical cancer research today. The report is intended to give all those with an interest in cancer care-the general public, cancer patients and organizations, policymakers, oncologists, and other medical professionals-an accessible summary of the year's most important cancer research advances. These pages report on the use of magnetic resonance imaging for breast cancer screening, the association between hormone replacement therapy and breast cancer incidence, the link between human papillomavirus and head and neck cancers, and the use of radiation therapy to prevent lung cancer from spreading. They also report on effective new targeted therapies for cancers that have been historically difficult to treat, such as liver cancer and kidney cancer, among many others. A total of 24 advances are featured in this year's report. These advances and many more over the past several years show that the nation's long-term investment in cancer research is paying off. But there are disturbing signs that progress could slow. We are now in the midst of the longest sustained period of flat government funding for cancer research in history. The budgets for the National Institutes of Health and the National Cancer Institute (NCI) have been unchanged for four years. When adjusted for inflation, cancer research funding has actually declined 12% since 2004. These budget constraints limit the NCI's ability to fund promising cancer research. In the past several years the number of grants that the NCI has been able to fund has significantly decreased; this year, in response to just the

Recent advances and industrial viewpoint for biological treatment of wastewaters by oleaginous microorganisms.

PubMed

Huang, Chao; Luo, Mu-Tan; Chen, Xue-Fang; Xiong, Lian; Li, Xiao-Mei; Chen, Xin-De

2017-05-01

Recently, technology of using oleaginous microorganisms for biological treatment of wastewaters has become one hot topic in biochemical and environmental engineering for its advantages such as easy for operation in basic bioreactor, having potential to produce valuable bio-products, efficient wastewaters treatment in short period, etc. To promote its industrialization, this article provides some comprehensive analysis of this technology such as its advances, issues, and outlook especially from industrial viewpoint. In detail, the types of wastewaters can be treated and the kinds of oleaginous microorganisms used for biological treatment are introduced, the potential of industrial application and issues (relatively low COD removal, low lipid yield, cost of operation, and lack of scale up application) of this technology are presented, and some critical outlook mainly on co-culture method, combination with other treatments, process controlling and adjusting are discussed systematically. By this article, some important information to develop this technology can be obtained. Copyright © 2017 Elsevier Ltd. All rights reserved.

Society for the advancement of material and process engineering. 41st International SAMPE symposium and exhibition, Volume 41, Books 1 and 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This document contains reports which were presented at the 41st International Society For The Advancement of Material and Process Engineering Symposium and Exhibition. Topics include: structural integrity of aging aircraft; composite materials development; affordable composites and processes; corrosion characterization of aging aircraft; adhesive advances; composite design; dual use materials and processing; repair of aircraft structures; adhesive inspection; materials systems for infrastructure; fire safety; composite impact/energy absorption; advanced materials for space; seismic retrofit; high temperature resins; preform technology; thermoplastics; alternative energy and transportation; manufacturing; and durability. Individual reports have been processed separately for the United States Department of Energy databases.

Advancing metabolic engineering through systems biology of industrial microorganisms.

PubMed

Dai, Zongjie; Nielsen, Jens

2015-12-01

Development of sustainable processes to produce bio-based compounds is necessary due to the severe environmental problems caused by the use of fossil resources. Metabolic engineering can facilitate the development of highly efficient cell factories to produce these compounds from renewable resources. The objective of systems biology is to gain a comprehensive and quantitative understanding of living cells and can hereby enhance our ability to characterize and predict cellular behavior. Systems biology of industrial microorganisms is therefore valuable for metabolic engineering. Here we review the application of systems biology tools for the identification of metabolic engineering targets which may lead to reduced development time for efficient cell factories. Finally, we present some perspectives of systems biology for advancing metabolic engineering further. Copyright © 2015 Elsevier Ltd. All rights reserved.

Quality and human society

NASA Astrophysics Data System (ADS)

Stoll, W.

1991-02-01

Quality of products and services is seen as a necessity in our modern world. Quality also has important cross-links to safety in our society. It is however suggested, that human beings are living in their industrial environment under the stress of a fractured personality with anxieties and frustrations. Some cultural comparisons with other industrial nations are given. Quality control tailored to human nature is recommended.

2001 Industry Studies: Advanced Manufacturing

DTIC Science & Technology

2001-05-28

oriented, 19 and manufacturers are employing the Internet and associated information technologies to better integrate supply chains and form extended...ways to compete in world markets . As part of this ongoing transformation, the broad implementation of advanced manufacturing technologies , processes...competitive advantages and better performance in world markets . Importantly, advanced manufacturing involves the innovative integration of new technology

Recent advances in nephrology: highlights from the 35th annual meeting of the American society of nephrology.

PubMed

Cases, Aleix

2002-12-01

The 35th Annual Meeting of the American Society of Nephrology, held in Philadelphia, Pennsylvania, United States (October 30 to November 4, 2002) presented the newest advances in basic and clinical nephrology science. Several presentations and symposia discussed the effects of various interventions and risk factors in clinical outcomes in dialysis patients. The recent evidences of pure red cell aplasia secondary to neutralizing antibodies against erythropoietin were also extensively discussed in a special symposium. Recent advances in the management of calcium phosphorus metabolism and secondary hyperparathyroidism, such as the clinical efficacy and safety of AMG-073, a new calcimimetic agent in the control of hyperparathyroidism in chronic kidney disease patients, or the use of sevelamer or lanthanum carbonate as phosphate binders, were presented. The results in animal models on improved sparing of renal function with rapamycin versus cyclosporin A represent a promising advance in renal transplantation. Finally, the recent discoveries with the newly identified disease gene PKHD1, which causes autosomal recessive polycystic kidney disease, were also presented at the meeting. (c) 2002 Prous Science. All rights reserved.

Tobacco industry scientific advisors: serving society or selling cigarettes?

PubMed

Warner, K E

1991-07-01

According to industry documents, the tobacco industry has executed a "brilliantly conceived" strategy to "creat[e] doubt" in the public's mind about whether cigarette smoking is in fact a serious cause of disease. A component of this strategy has been the funding of scientific research "into the gaps in knowledge in the smoking controversy." Grant review and selection are performed by a group of independent scientists. Knowledgeable observers believe that the existence of this research funding program in general, and the Scientific Advisory Board in particular, is intended by the industry to reinforce doubts in the public mind about the severity of the hazards posed by smoking. Because the Advisory Board has never taken a public stance against the industry's position that the causal relationship between smoking and disease remains unproven, I polled these scientists to determine whether they believed that smoking is a cause of lung cancer. Despite repeated opportunities, only four of 13 board members responded, all affirmatively; two others have expressed their judgment that smoking causes lung cancer in their professional publications. Thus, over half of the Board members, and the Board as a whole, have not gone on record as rejecting the industry's "party line." It might be hoped that the American scientists would follow the lead of the members of a similar body of scientists in Australia who have taken a strong and public stand against the industry position that smoking is not an established cause of disease.

Science Serves Society.

ERIC Educational Resources Information Center

Sneed, G. C.

This book discusses how some of the topics taught in a conventional physics course have been used to solve interesting technical problems in industry, medicine, agriculture, transportation, and other areas of society. The topics include heat, optics, magnetism and electricity, nuclear physics, and sound. (MLH)

Relations between professional medical associations and the health-care industry, concerning scientific communication and continuing medical education: a policy statement from the European Society of Cardiology.

PubMed

2012-06-01

Physicians have an ethical duty to keep up-to-date with current knowledge. Professional medical associations such as the European Society of Cardiology (ESC) support these obligations. In Europe, the costs of continuing medical education (CME) are insufficiently supported from governments and employers; however, medical associations have been criticized for accepting alternative financial support from industry. Medical education and training in research include learning how to assess the quality and reliability of any information. There is some risk of bias in any form of scientific communication including intellectual, professional, and financial and it is essential that in particular, the latter must be acknowledged by full disclosure. It is essential that there is strong collaboration between basic and clinical researchers from academic institutions on the one hand, with engineers and scientists from the research divisions of device and pharmaceutical companies on the other. This is vital so that new diagnostic methods and treatments are developed. Promotion of advances by industry may accelerate their implementation into clinical practice. Universities now frequently exhort their academic staff to protect their intellectual property or commercialize their research. Thus, it is not commercial activity or links per se that have become the target for criticism but the perceived influence of commercial enterprises on clinical decision-making or on messages conveyed by professional medical organizations. This document offers the perspective of the ESC on the current debate, and it recommends how to minimize bias in scientific communications and CME and how to ensure proper ethical standards and transparency in relations between the medical profession and industry.

Relations between professional medical associations and the health-care industry, concerning scientific communication and continuing medical education: a Policy Statement from the European Society of Cardiology.

PubMed

2012-03-01

Physicians have an ethical duty to keep up-to-date with current knowledge. Professional medical associations such as the European Society of Cardiology (ESC) support these obligations. In Europe, the costs of continuing medical education (CME) are insufficiently supported from governments and employers; however, medical associations have been criticized for accepting alternative financial support from industry. Medical education and training in research include learning how to assess the quality and reliability of any information. There is some risk of bias in any form of scientific communication including intellectual, professional, and financial and it is essential that in particular, the latter must be acknowledged by full disclosure. It is essential that there is strong collaboration between basic and clinical researchers from academic institutions on the one hand, with engineers and scientists from the research divisions of device and pharmaceutical companies on the other. This is vital so that new diagnostic methods and treatments are developed. Promotion of advances by industry may accelerate their implementation into clinical practice. Universities now frequently exhort their academic staff to protect their intellectual property or commercialize their research. Thus, it is not commercial activity or links per se that have become the target for criticism but the perceived influence of commercial enterprises on clinical decision-making or on messages conveyed by professional medical organizations. This document offers the perspective of the ESC on the current debate, and it recommends how to minimize bias in scientific communications and CME and how to ensure proper ethical standards and transparency in relations between the medical profession and industry.

Transdiscipline and research in health: science, society and decision making

PubMed Central

2015-01-01

Significant advances in science should be given to addressing the needs of society and the historical context of the territories. Although technological developments that began with modernity and the industrial revolution allowed human beings to control the resources of nature to put to your service without limits, it is clear that the crisis of the prevailing development models manifest themselves in many ways but with three common denominators: environmental degradation, social injustice and extreme poverty. Consequently, today should not be possible to think a breakthrough in the development of science without addressing global environmental problems and the deep social injustices that increase at all scales under the gaze, impassively in many occasions, of formal science. PMID:26600628

Transdiscipline and research in health: science, society and decision making.

PubMed

Méndez, Fabián

2015-09-30

Significant advances in science should be given to addressing the needs of society and the historical context of the territories. Although technological developments that began with modernity and the industrial revolution allowed human beings to control the resources of nature to put to your service without limits, it is clear that the crisis of the prevailing development models manifest themselves in many ways but with three common denominators: environmental degradation, social injustice and extreme poverty. Consequently, today should not be possible to think a breakthrough in the development of science without addressing global environmental problems and the deep social injustices that increase at all scales under the gaze, impassively in many occasions, of formal science.

ASME Material Challenges for Advanced Reactor Concepts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Piyush Sabharwall; Ali Siahpush

2013-07-01

This study presents the material Challenges associated with Advanced Reactor Concept (ARC) such as the Advanced High Temperature Reactor (AHTR). ACR are the next generation concepts focusing on power production and providing thermal energy for industrial applications. The efficient transfer of energy for industrial applications depends on the ability to incorporate cost-effective heat exchangers between the nuclear heat transport system and industrial process heat transport system. The heat exchanger required for AHTR is subjected to a unique set of conditions that bring with them several design challenges not encountered in standard heat exchangers. The corrosive molten salts, especially at highermore » temperatures, require materials throughout the system to avoid corrosion, and adverse high-temperature effects such as creep. Given the very high steam generator pressure of the supercritical steam cycle, it is anticipated that water tube and molten salt shell steam generators heat exchanger will be used. In this paper, the ASME Section III and the American Society of Mechanical Engineers (ASME) Section VIII requirements (acceptance criteria) are discussed. Also, the ASME material acceptance criteria (ASME Section II, Part D) for high temperature environment are presented. Finally, lack of ASME acceptance criteria for thermal design and analysis are discussed.« less

Resource acquisition, distribution and end-use efficiencies and the growth of industrial society

NASA Astrophysics Data System (ADS)

Jarvis, A.; Jarvis, S.; Hewitt, N.

2015-01-01

A key feature of the growth of industrial society is the acquisition of increasing quantities of resources from the environment and their distribution for end use. With respect to energy, growth has been near exponential for the last 160 years. We attempt to show that the global distribution of resources that underpins this growth may be facilitated by the continual development and expansion of near optimal directed networks. If so, the distribution efficiencies of these networks must decline as they expand due to path lengths becoming longer and more tortuous. To maintain long-term exponential growth the physical limits placed on the distribution networks appear to be counteracted by innovations deployed elsewhere in the system: namely at the points of acquisition and end use. We postulate that the maintenance of growth at the specific rate of ~2.4% yr-1 stems from an implicit desire to optimise patterns of energy use over human working lifetimes.

Hazard responses in the pre-industrial era: vulnerability and resilience of traditional societies to volcanic disasters and the implications for present-day disaster planning

NASA Astrophysics Data System (ADS)

Sangster, Heather

2014-05-01

A major research frontier in the study of natural hazard research involves unravelling the ways in which societies have reacted historically to disasters, and how such responses influence current policies of disaster reduction. For societies it is common to classify responses to natural hazards into: pre-industrial (folk); industrial; and post-industrial (comprehensive) responses. Pre-industrial societies are characterised by: a pre-dominantly rural location; an agricultural economic focus; artisan handicrafts rather than industrial production, parochialism, with people rarely travelling outside their local area and being little affected by external events and a feudal or semi-feudal social structure. In the past, hazard assessment focused on the physical processes that produced extreme and potentially damaging occurrences, however from the middle of the twenty-first century research into natural hazards has been cast within a framework defined by the polarities (or opposites) of vulnerability and resilience, subject to a blend of unique environmental, social, economic and cultural forces in hazardous areas, that either increase or decrease the impact of extreme events on a given society. In the past decade research of this type has been facilitated by a 'revolution' of source materials across a range of languages and in a variety of electronic formats (e.g. official archives; major contemporary and near-contemporary publications - often available as reprints; national and international newspapers of record; newsreel-films; and, photographs) and in the introduction of more reliable translation software (e.g. Systrans) that provides far more scope to the researcher in the study of natural hazards than was the case even a few years ago. Knowledge of hazard responses in the pre-industrial era is, not only important in its own right because it reveals indigenous strategies of coping, but also informs present-day disaster planners about how people have reacted to past

Advances Afoot in Microbiology.

PubMed

Patel, Robin; Karon, Brad S

2017-07-01

In 2016, the American Academy of Microbiology convened a colloquium to examine point-of-care (POC) microbiology testing and to evaluate its effects on clinical microbiology. Colloquium participants included representatives from clinical microbiology laboratories, industry, and the government, who together made recommendations regarding the implementation, oversight, and evaluation of POC microbiology testing. The colloquium report is timely and well written (V. Dolen et al., Changing Diagnostic Paradigms for Microbiology , 2017, https://www.asm.org/index.php/colloquium-reports/item/6421-changing-diagnostic-paradigms-for-microbiology?utm_source=Commentary&utm_medium=referral&utm_campaign=diagnostics). Emerging POC microbiology tests, especially nucleic acid amplification tests, have the potential to advance medical care. Copyright © 2017 American Society for Microbiology.

Engineering propionibacteria as versatile cell factories for the production of industrially important chemicals: advances, challenges, and prospects.

PubMed

Guan, Ningzi; Zhuge, Xin; Li, Jianghua; Shin, Hyun-Dong; Wu, Jing; Shi, Zhongping; Liu, Long

2015-01-01

Propionibacteria are actinobacteria consisting of two principal groups: cutaneous and dairy. Cutaneous propionibacteria are considered primary pathogens to humans, whereas dairy propionibacteria are widely used in the food and pharmaceutical industries. Increasing attention has been focused on improving the performance of dairy propionibacteria for the production of industrially important chemicals, and significant advances have been made through strain engineering and process optimization in the production of flavor compounds, nutraceuticals, and antimicrobial compounds. In addition, genome sequencing of several propionibacteria species has been completed, deepening understanding of the metabolic and physiological features of these organisms. However, the metabolic engineering of propionibacteria still faces several challenges owing to the lack of efficient genome manipulation tools and the existence of various types of strong restriction-modification systems. The emergence of systems and synthetic biology provides new opportunities to overcome these bottlenecks. In this review, we first introduce the major species of propionibacteria and their properties and provide an overview of their functions and applications. We then discuss advances in the genome sequencing and metabolic engineering of these bacteria. Finally, we discuss systems and synthetic biology approaches for engineering propionibacteria as efficient and robust cell factories for the production of industrially important chemicals.

Clinical cancer advances 2011: Annual Report on Progress Against Cancer from the American Society of Clinical Oncology.

PubMed

Vogelzang, Nicholas J; Benowitz, Steven I; Adams, Sylvia; Aghajanian, Carol; Chang, Susan Marina; Dreyer, Zoann Eckert; Janne, Pasi A; Ko, Andrew H; Masters, Greg A; Odenike, Olatoyosi; Patel, Jyoti D; Roth, Bruce J; Samlowski, Wolfram E; Seidman, Andrew D; Tap, William D; Temel, Jennifer S; Von Roenn, Jamie H; Kris, Mark G

2012-01-01

-time information that can inform the care of every patient with cancer as well as connect patients with their entire medical teams. The rapid learning system will form a continuous cycle of learning: securely capturing data from every patient at the point of care, drawing on evidence-based guidelines, and evaluating quality of care against those standards and the outcomes of other patients. Clinical trials are another area in which collaboration is critical. Increasing clinical trial participation will require commitment across the cancer community from physicians, patients, insurers, hospitals, and industry. A 2010 report by the Institute of Medicine described challenges to participation in trials by both physicians and patients and provided recommendations for revitalizing clinical trials conducted through the National Cancer Institute's Cooperative Group Program. ASCO has pledged its support for the full implementation of these recommendations. More broadly, ASCO recently outlined a bold vision for translational and clinical cancer research for the next decade and made recommendations to achieve that vision. Accelerating Progress Against Cancer: ASCO's Blueprint for Transforming Clinical and Translational Research, released in November, calls for a research system that takes full advantage of today's scientific and technologic opportunities and sets a high-level agenda for policy makers, regulators, and advocates. Cancer research has transformed cancer care in the past forty years, and this year's Clinical Cancer Advances illustrates how far we have come in the past year alone. We now have a tremendous opportunity to use today's knowledge and collaborate across all facets of cancer care to conquer this deadly disease. Michael P. Link, MD President American Society of Clinical Oncology.

Industry and the profession of medicine: balancing appropriate relationships with the need for innovation.

PubMed

Lewin, Jack; Arend, Thomas E

2011-09-01

, they are critical in the advancement of the quality of care for patients. The challenge is for medical societies to help the media, the public, and policymakers better understand the role of industry in promoting research, education, and innovation in medicine. Copyright © 2011 Society for Vascular Surgery. Published by Mosby, Inc. All rights reserved.

Digital Literacy: Tools and Methodologies for Information Society

ERIC Educational Resources Information Center

Rivoltella, Pier Cesare, Ed.

2008-01-01

Currently in a state of cultural transition, global society is moving from a literary society to digital one, adopting widespread use of advanced technologies such as the Internet and mobile devices. Digital media has an extraordinary impact on society's formative processes, forcing a pragmatic shift in their management and organization. This…

Institutional profile. The International Society for Cellular Therapy: evolving to meet the demands of the regenerative medicine industry.

PubMed

Maziarz, Richard T; Arthurs, Jane; Horwitz, Edwin

2011-03-01

The International Society for Cellular Therapy is a global association driving the translation of scientific research to deliver innovative cellular therapies to patients. Established in 1992, its membership and leadership comprises world-class scientists, clinicians, technologists, biotech/pharma and regulatory professionals from 40 countries focused on preclinical and translational aspects of developing cell therapy products. The International Society for Cellular Therapy has evolved in alignment with the maturation of the field of cell therapy and regenerative medicine to create forums for discussion of shared concerns for commercialization of cell therapies and of development of consensus standards, recognizing that true commercialization depends upon the translational scientific community, the regional regulatory and policy institutions, and the technology support and capital investment from industry. It exists to facilitate the international work of many, to spawn new initiatives, and to synergize with other stakeholders to create the best outcome for the many patients across the world depending on the answers and improved health that cellular therapeutics will provide them.

Knowledge to Manage the Knowledge Society

ERIC Educational Resources Information Center

Minati, Gianfranco

2012-01-01

Purpose: The purpose of this research is to make evident the inadequateness of concepts and language based on industrial knowledge still used in current practices by managers to cope with problems of the post-industrial societies characterised by non-linear process of emergence and acquisition of properties. The purpose is to allow management to…

Establishing Chlamydomonas reinhardtii as an industrial biotechnology host.

PubMed

Scaife, Mark A; Nguyen, Ginnie T D T; Rico, Juan; Lambert, Devinn; Helliwell, Katherine E; Smith, Alison G

2015-05-01

Microalgae constitute a diverse group of eukaryotic unicellular organisms that are of interest for pure and applied research. Owing to their natural synthesis of value-added natural products microalgae are emerging as a source of sustainable chemical compounds, proteins and metabolites, including but not limited to those that could replace compounds currently made from fossil fuels. For the model microalga, Chlamydomonas reinhardtii, this has prompted a period of rapid development so that this organism is poised for exploitation as an industrial biotechnology platform. The question now is how best to achieve this? Highly advanced industrial biotechnology systems using bacteria and yeasts were established in a classical metabolic engineering manner over several decades. However, the advent of advanced molecular tools and the rise of synthetic biology provide an opportunity to expedite the development of C. reinhardtii as an industrial biotechnology platform, avoiding the process of incremental improvement. In this review we describe the current status of genetic manipulation of C. reinhardtii for metabolic engineering. We then introduce several concepts that underpin synthetic biology, and show how generic parts are identified and used in a standard manner to achieve predictable outputs. Based on this we suggest that the development of C. reinhardtii as an industrial biotechnology platform can be achieved more efficiently through adoption of a synthetic biology approach. © 2015 The Authors The Plant Journal published by Society for Experimental Biology and John Wiley & Sons Ltd.

History of Publications from the American Otological Society: A Celebration of the 150-Year History of the American Otological Society.

PubMed

Lustig, Lawrence R

2018-04-01

: The American Otological Society (AOS) has been on the forefront of advancing the science of auditory and vestibular physiology, and art of ear medicine since its founding in 1868. For 150 years, through its publications, the AOS has provided a critical forum to debate these advances, highlighting treatment successes and failures, and served a place to celebrate its history. This historical review provides an overview of the publications of the AOS since its founding: the Transactions of the annual meeting from 1868 through 2006, Treatises on Otosclerosis (1928-1935), the History of the Society from the 100 and 125th anniversary, and the sponsored Society journals-American Journal of Otology (1879-1883, 1979-2000) and Otology & Neurotology (2001-present).

Industrial advanced turbine systems: Development and demonstration. Annual report, October 1, 1996--September 30, 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-12-31

The US DOE has initiated a program for advanced turbine systems (ATS) that will serve industrial power generation markets. The ATS will provide ultra-high efficiency, environmental superiority, and cost competitiveness. The ATS will foster (1) early market penetration that enhances the global competitiveness of US industry, (2) public health benefits resulting from reduced exhaust gas emissions of target pollutants, (3) reduced cost of power used in the energy-intensive industrial marketplace and (4) the retention and expansion of the skilled US technology base required for the design, development and maintenance of state-of-the-art advanced turbine products. The Industrial ATS Development and Demonstrationmore » program is a multi-phased effort. Solar Turbines Incorporated (Solar) has participated in Phases 1 and 2 of the program. On September 14, 1995 Solar was awarded a Cooperative Agreement for Phases 3 and 4 of the program. Phase 3 of the work is separated into two subphases: Phase 3A entails Component Design and Development Phase 3B will involve Integrated Subsystem Testing. Phase 4 will cover Host Site Testing. Forecasts call for completion of the program within budget as originally estimated. Scheduled completion is forecasted to be approximately 3 years late to original plan. This delay has been intentionally planned in order to better match program tasks to the anticipated availability of DOE funds. To ensure the timely realization of DOE/Solar program goals, the development schedule for the smaller system (Mercury 50) and enabling technologies has been maintained, and commissioning of the field test unit is scheduled for May of 2000. As of the end of the reporting period work on the program is 22.80% complete based upon milestones completed. This measurement is considered quite conservative as numerous drawings on the Mercury 50 are near release. Variance information is provided in Section 4.0-Program Management.« less

Clinical cancer advances 2006: major research advances in cancer treatment, prevention, and screening--a report from the American Society of Clinical Oncology.

PubMed

Ozols, Robert F; Herbst, Roy S; Colson, Yolonda L; Gralow, Julie; Bonner, James; Curran, Walter J; Eisenberg, Burton L; Ganz, Patricia A; Kramer, Barnett S; Kris, Mark G; Markman, Maurie; Mayer, Robert J; Raghavan, Derek; Reaman, Gregory H; Sawaya, Raymond; Schilsky, Richard L; Schuchter, Lynn M; Sweetenham, John W; Vahdat, Linda T; Winn, Rodger J

2007-01-01

A MESSAGE FROM ASCO's PRESIDENT For the second consecutive year, the American Society of Clinical Oncology (ASCO) is publishing Clinical Cancer Advances: Major Research Advances in Cancer Treatment, Prevention, and Screening, an annual review of the most significant cancer research presented or published over the past year. ASCO developed this report to demonstrate the enormous progress being made on the front lines of cancer research today. The report is intended to give all those with an interest in cancer care-the general public, cancer patients and physicians, policymakers, oncologists, and other medical professionals-an accessible summary of the year's most important cancer research advances. These pages report on new targeted therapies that are improving survival and response rates in hard-to-treat cancers such as kidney cancer, HER-2-positive breast cancer, head and neck cancer, and chronic myelogenous leukemia; the FDA's approval of the world's first preventive vaccine for human papillomavirus (HPV), which has the potential to dramatically reduce the global burden of cervical cancer; and advances in the fast-growing field of personalized medicine, including a new lung cancer test that could help physicians better target treatments and predict prognosis. These advances are only part of the landscape. Survival rates are on the rise, the number of cancer deaths in the United States began declining for the first time since 1930, and new research is showing that the rates of certain common cancers, such as those of the breast and colon, have stabilized, and may have even begun to decline. However, cancer research still faces a number of major obstacles. At a time of extraordinary scientific potential, declining federal funding of cancer research threatens to stall or even reverse recent progress. Such funding cuts have already led to fewer clinical trials, fewer talented young physicians entering the field, and a growing bottleneck of basic science discoveries

Activities for the Promotion of Gender Equality in Japan—Japan Society of Applied Physics

NASA Astrophysics Data System (ADS)

Kodate, Kashiko; Tanaka, Kazuo

2005-10-01

Since 1946, the Japan Society of Applied Physics (JSAP) has strived to promote research and development in applied physics for benefits beyond national boundaries. Activities of JSAP involve multidisciplinary fields, from physics and engineering to life sciences. Of its 23,000 members, 48% are from industry, 29% from academia, and about 7% from semi-autonomous national research laboratories. Its large industrial membership is one of the distinctive features of JSAP. In preparation for the First IUPAP International Conference on Women in Physics (Paris, 2002), JSAP members took the first step under the strong leadership of then-JSAP President Toshio Goto, setting up the Committee for the Promotion Equal Participation of Men and Women in Science and Technology. Equality rather than women's advancement is highlighted to further development in science and technology. Attention is also paid to balancing the number of researchers from different age groups and affiliations. The committee has 22 members: 12 female and 10 male; 7 from corporations, 12 from universities, and 3 from semi-autonomous national research institutes. Its main activities are to organize symposia and meetings, conduct surveys among JSAP members, and provide child-care facilities at meetings and conferences. In 2002 the Japan Physics Society and the Chemical Society of Japan jointly created the Japan Inter-Society Liaison Association for the Promotion of Equal Participation of Men and Women in Science and Engineering. Membership has grown to 44 societies (of which 19 are observers) ranging from mathematics, information, and life sciences to civil engineering. Joint activities across sectors and empower the whole. The Gender Equality Bureau in the Cabinet Office recently launched a large-scale project called "Challenge Campaign" to encourage girls to major in natural science and engineering, which JSAP is co-sponsoring.

Advances in Risk Analysis with Big Data.

PubMed

Choi, Tsan-Ming; Lambert, James H

2017-08-01

With cloud computing, Internet-of-things, wireless sensors, social media, fast storage and retrieval, etc., organizations and enterprises have access to unprecedented amounts and varieties of data. Current risk analysis methodology and applications are experiencing related advances and breakthroughs. For example, highway operations data are readily available, and making use of them reduces risks of traffic crashes and travel delays. Massive data of financial and enterprise systems support decision making under risk by individuals, industries, regulators, etc. In this introductory article, we first discuss the meaning of big data for risk analysis. We then examine recent advances in risk analysis with big data in several topic areas. For each area, we identify and introduce the relevant articles that are featured in the special issue. We conclude with a discussion on future research opportunities. © 2017 Society for Risk Analysis.

Progress in modification of sunflower oil to expand its industrial value.

PubMed

Rauf, Saeed; Jamil, Nazia; Tariq, Sultan Ali; Khan, Maria; Kausar, Maria; Kaya, Yalcin

2017-05-01

Increasing the sunflower seed oil content as well as improving its quality makes it compatible for industrial demands. This is an important breeding objective of sunflower which increases its market value and ensures high returns for the producers. The present review focuses on determining the progress of improving sunflower seed oil content and modifying its quality by empirical and advanced molecular breeding methods. It is known that the sunflower oil content and quality have been altered through empirical selection methods and mutation breeding programmes in various parts of the world. Further improvement in seed oil content and its components (such as phytosterols, tocopherols and modified fatty acid profile) has been slowed down due to low genetic variation in elite germplasm and complex of hereditary traits. Introgression from wild species can be carried out to modify the fatty acids profile and tocopherol contents with linkage drags. Different transgenes introduced through biotechnological methods may produce novel long-chain fatty acids within sunflower oil. Bio-engineering of sunflower oil could allow it to be used in diverse industrial products such as bio-diesel or bio-plastics. These results showed that past and current trends of modifying sunflower oil quality are essential for its further expansion as an oilseed crop. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Choices for Challenge: SAGE--The Society for the Advancement of Gifted Education Conference Proceedings (2nd, Edmonton, Alberta, Canada, September 26-28, 1991).

ERIC Educational Resources Information Center

Calgary Univ. (Alberta). Centre for Gifted Education.

This monograph contains the conference proceedings of the 1991 conference of the Society for the Advancement of Gifted Education, held in Calgary, Alberta. The papers have the following titles and authors: "Experiencing Creativity in Music" (Loretta Baker); "Students Who are Hearing Impaired and Gifted: Teachers' Perspectives" (Mary Ann Bibby);…

AICD -- Advanced Industrial Concepts Division Biological and Chemical Technologies Research Program. 1993 Annual summary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Petersen, G.; Bair, K.; Ross, J.

1994-03-01

The annual summary report presents the fiscal year (FY) 1993 research activities and accomplishments for the United States Department of Energy (DOE) Biological and Chemical Technologies Research (BCTR) Program of the Advanced Industrial Concepts Division (AICD). This AICD program resides within the Office of Industrial Technologies (OIT) of the Office of Energy Efficiency and Renewable Energy (EE). The annual summary report for 1993 (ASR 93) contains the following: A program description (including BCTR program mission statement, historical background, relevance, goals and objectives), program structure and organization, selected technical and programmatic highlights for 1993, detailed descriptions of individual projects, a listingmore » of program output, including a bibliography of published work, patents, and awards arising from work supported by BCTR.« less

Clinical Cancer Advances 2013: Annual Report on Progress Against Cancer from the American Society of Clinical Oncology.

PubMed

Patel, Jyoti D; Krilov, Lada; Adams, Sylvia; Aghajanian, Carol; Basch, Ethan; Brose, Marcia S; Carroll, William L; de Lima, Marcos; Gilbert, Mark R; Kris, Mark G; Marshall, John L; Masters, Gregory A; O'Day, Steven J; Polite, Blasé; Schwartz, Gary K; Sharma, Sunil; Thompson, Ian; Vogelzang, Nicholas J; Roth, Bruce J

2014-01-10

Since its founding in 1964, the American Society of Clinical Oncology (ASCO) has been committed to improving cancer outcomes through research and the delivery of quality care. Research is the bedrock of discovering better treatments--providing hope to the millions of individuals who face a cancer diagnosis each year. The studies featured in "Clinical Cancer Advances 2013: Annual Report on Progress Against Cancer From the American Society of Clinical Oncology" represent the invaluable contributions of thousands of patients who participate in clinical trials and the scientists who conduct basic and clinical research. The insights described in this report, such as how cancers hide from the immune system and why cancers may become resistant to targeted drugs, enable us to envision a future in which cancer will be even more controllable and preventable. The scientific process is thoughtful, deliberate, and sometimes slow, but each advance, while helping patients, now also points toward new research questions and unexplored opportunities. Both dramatic and subtle breakthroughs occur so that progress against cancer typically builds over many years. Success requires vision, persistence, and a long-term commitment to supporting cancer research and training. Our nation's longstanding investment in federally funded cancer research has contributed significantly to a growing array of effective new treatments and a much deeper understanding of the drivers of cancer. But despite this progress, our position as a world leader in advancing medical knowledge and our ability to attract the most promising and talented investigators are now threatened by an acute problem: Federal funding for cancer research has steadily eroded over the past decade, and only 15% of the ever-shrinking budget is actually spent on clinical trials. This dismal reality threatens the pace of progress against cancer and undermines our ability to address the continuing needs of our patients. Despite this

Statistics and Politics in a "Knowledge Society"

ERIC Educational Resources Information Center

Giovannini, Enrico

2008-01-01

The importance of information in economic and political processes is widely recognised by modern theories. This information, coupled with the advancements in Information and Communication Technologies (ICT) has changed the way in which markets and societies work. The availability of the Internet and other advanced forms of media have made…

Advanced glossmeters for industrial applications

NASA Astrophysics Data System (ADS)

Kuivalainen, Kalle; Oksman, Antti; Juuti, Mikko; Myller, Kari; Peiponen, Kai-Erik

2010-05-01

In this paper, we present three new types of diffractive-optical-element (DOE)-based glossmeters (DOGs) that have been developed for both laboratory and online local specular gloss measurements of objects in industrial processes. The three are denoted as the handheld wireless glossmeter, µDOG two-dimensional (2D) and µDOG one-dimensional (1D), respectively. These glossmeters are designed to operate under conditions where gloss measurement with conventional glossmeters is impossible or difficult, or when fine structures of the gloss over a surface are an issue. Here, we show the applicability of the handheld glossmeter and µDOG 2D in the inspection of gloss from rough stainless steel plates finished by different machining methods. We also briefly introduce the concept of online gauge µDOG 1D for gloss assessment in industrial measurement environments.

Modeling the energetic and exergetic self-sustainability of societies with different structures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sciubba, E.

1995-06-01

The paper examines global energy and exergy flows in various models of organized human societies: from primitive tribal organizations to teocratic/aristocratic societies, to the present industrial (and post-industrial) society, to possible future highly robotized or central control social organizations. The analysis focuses on the very general chain of technological processes connected to the extraction, conversion, distribution and final use of the real energetic content of natural resources (i.e., their exergy): the biological food chain is also considered, albeit in a very simplified and humankind sense. It is argued that, to sustain this chain of processes, it is necessary to usemore » a substantial portion of the final-use energy flow, and to employ a large portion of the total work force sustained by this end-use energy. It is shown that if these quantities can be related to the total exergy flow rate (from the source) and to the total available work force, then this functional relationship takes different forms in different types of society. The procedure is very general: each type of societal organization is reduced to a simple model for which energy and exergy flow diagrams are calculated, under certain well-defined assumptions, which restrain both the exchanges among the functional groups which constitute the model, and the exchanges with the environment. The results can be quantified using some assumptions/projections about energy consumption levels for different stages of technological development which are available in the literature; the procedure is applied to some models of primitive and pre-industrial societies, to the present industrial/post-industrial society, and to a hypothetical model of a future, high-technology society.« less

Women and the Information Society: Barriers and Participation.

ERIC Educational Resources Information Center

Goulding, Anne; Spacey, Rachel

The development and use of communication and information technologies, notably the Internet, have stimulated huge changes in the organization of work and daily life in Europe, leading to a process of transition from the "Industrial" to the "Information" society. The ultimate aim of the Information Society should be the…

NASA Lewis Helps Develop Advanced Saw Blades for the Lumber Industry

NASA Technical Reports Server (NTRS)

1998-01-01

NASA Lewis Research Center's Structures and Material Divisions are centers of excellence in high-temperature alloys for aerospace applications such as advanced aircraft and rocket engines. Lewis' expertise in these fields was enlisted in the development of a new generation of circular sawblades for the lumber industry to use in cutting logs into boards. The U.S. Department of Agriculture's (USDA) Forest Products Laboratory and their supplier had succeeded in developing a thinner sawblade by using a nickel-based alloy, but they needed to reduce excessive warping due to residual stresses. They requested assistance from Lewis' experts, who successfully eliminated the residual stress problem and increased blade strength by over 12 percent. They achieved this by developing an innovative heat treatment based on their knowledge of nickel-based superalloys used in aeropropulsion applications.

Advanced chip designs and novel cooling techniques for brightness scaling of industrial, high power diode laser bars

NASA Astrophysics Data System (ADS)

Heinemann, S.; McDougall, S. D.; Ryu, G.; Zhao, L.; Liu, X.; Holy, C.; Jiang, C.-L.; Modak, P.; Xiong, Y.; Vethake, T.; Strohmaier, S. G.; Schmidt, B.; Zimer, H.

2018-02-01

The advance of high power semiconductor diode laser technology is driven by the rapidly growing industrial laser market, with such high power solid state laser systems requiring ever more reliable diode sources with higher brightness and efficiency at lower cost. In this paper we report simulation and experimental data demonstrating most recent progress in high brightness semiconductor laser bars for industrial applications. The advancements are in three principle areas: vertical laser chip epitaxy design, lateral laser chip current injection control, and chip cooling technology. With such improvements, we demonstrate disk laser pump laser bars with output power over 250W with 60% efficiency at the operating current. Ion implantation was investigated for improved current confinement. Initial lifetime tests show excellent reliability. For direct diode applications <1 um smile and >96% polarization are additional requirements. Double sided cooling deploying hard solder and optimized laser design enable single emitter performance also for high fill factor bars and allow further power scaling to more than 350W with 65% peak efficiency with less than 8 degrees slow axis divergence and high polarization.

International Society for Cellular Therapy perspective on immune functional assays for mesenchymal stromal cells as potency release criterion for advanced phase clinical trials.

PubMed

Galipeau, Jacques; Krampera, Mauro; Barrett, John; Dazzi, Francesco; Deans, Robert J; DeBruijn, Joost; Dominici, Massimo; Fibbe, Willem E; Gee, Adrian P; Gimble, Jeffery M; Hematti, Peiman; Koh, Mickey B C; LeBlanc, Katarina; Martin, Ivan; McNiece, Ian K; Mendicino, Michael; Oh, Steve; Ortiz, Luis; Phinney, Donald G; Planat, Valerie; Shi, Yufang; Stroncek, David F; Viswanathan, Sowmya; Weiss, Daniel J; Sensebe, Luc

2016-02-01

Mesenchymal stromal cells (MSCs) as a pharmaceutical for ailments characterized by pathogenic autoimmune, alloimmune and inflammatory processes now cover the spectrum of early- to late-phase clinical trials in both industry and academic sponsored studies. There is a broad consensus that despite different tissue sourcing and varied culture expansion protocols, human MSC-like cell products likely share fundamental mechanisms of action mediating their anti-inflammatory and tissue repair functionalities. Identification of functional markers of potency and reduction to practice of standardized, easily deployable methods of measurements of such would benefit the field. This would satisfy both mechanistic research as well as development of release potency assays to meet Regulatory Authority requirements for conduct of advanced clinical studies and their eventual registration. In response to this unmet need, the International Society for Cellular Therapy (ISCT) addressed the issue at an international workshop in May 2015 as part of the 21st ISCT annual meeting in Las Vegas. The scope of the workshop was focused on discussing potency assays germane to immunomodulation by MSC-like products in clinical indications targeting immune disorders. We here provide consensus perspective arising from this forum. We propose that focused analysis of selected MSC markers robustly deployed by in vitro licensing and metricized with a matrix of assays should be responsive to requirements from Regulatory Authorities. Workshop participants identified three preferred analytic methods that could inform a matrix assay approach: quantitative RNA analysis of selected gene products; flow cytometry analysis of functionally relevant surface markers and protein-based assay of secretome. We also advocate that potency assays acceptable to the Regulatory Authorities be rendered publicly accessible in an "open-access" manner, such as through publication or database collection. Copyright © 2015

Creating conditions for the success of the French industrial advanced therapy sector.

PubMed

Lirsac, Pierre Noel; Blin, Olivier; Magalon, Jérémy; Angot, Pierre; de Barbeyrac, Estelle; Bilbault, Pascal; Bourg, Elisabeth; Damour, Odile; Faure, Patrick; Ferry, Nicolas; Garbil, Bénédicte; Larghero, Jérôme; Nguon, Marina; Pattou, François; Thumelin, Stéphane; Yates, Frank

2015-01-01

Although the European Union merely followed the initiatives of the United States and Japan by introducing special regimes for orphan medicinal products, it has introduced a special status for a new category of biological medicinal products, advanced therapy medicinal products (ATMPs), adopting specific associated regulations. European Regulation (which constitutes the highest legal instrument in the hierarchy of European law texts) [EC] No. 1394/2007, published in 2007, uses this term to define somatic cell therapy medicinal products, tissue-engineered products, and gene therapy medicinal products, possibly combined with medical devices. The stated objective was two-fold: both to promote their industrialization and market access, while guaranteeing a high level of health protection for patients. Since publication of the regulation, few marketing authorizations have been granted in Europe, and these have not been accompanied by commercial success. However, certain recent studies show that this is a growing sector and that France remains the leading European nation in terms of clinical trials. This round table brought together a panel of representatives of French public and private protagonists from the advanced therapy sector. The discussions focused on the conditions to ensure the success of translational research and, more generally, the French advanced therapy sector. These enabled a number of obstacles to be identified, which once lifted, by means of recommendations, would facilitate the development and success of this sector. © 2015 Société Française de Pharmacologie et de Thérapeutique.

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 1: Executive Summary, of a 15-Volume Set of Skills Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

The Machine Tool Advanced Skills Technology (MAST) consortium was formed to address the shortage of skilled workers for the machine tools and metals-related industries. Featuring six of the nation's leading advanced technology centers, the MAST consortium developed, tested, and disseminated industry-specific skill standards and model curricula for…

Reducing obesity will require involvement of all sectors of society.

PubMed

Hill, James O; Peters, John C; Blair, Steven N

2015-02-01

We need all sectors of society involved in reducing obesity. The food industry's effort to reduce energy intake as part of the Healthy Weight Commitment Foundation is a significant step in the right direction and should be recognized as such by the public health community. We also need to get organizations that promote physical inactivity, such as computer, automobile, and entertainment industries, to become engaged in efforts to reduce obesity. © 2014 The Obesity Society.

History of Japanese Society of Toxicology.

PubMed

Satoh, Tetsuo

2016-01-01

Founded in 1981, the Japanese Society of Toxicology (JSOT) has grown into an organization of nearly 3,000 members working together to advance the nation's scientific knowledge and understanding of toxicology through the implementation of planning that ensures a systematic and efficient expenditure of energies and resources, and is closely aligned with a strategy for accomplishing the Society's long-range plans. To promote public education in toxicology, the Society organizes public lectures during each year's annual meeting. Other activities include hosting scientific conferences, promoting continuing education, and facilitating international collaboration. Internally, the JSOT operates five standing committees: General Affairs, Educational, Editorial, Finance, and Science and Publicity to handle its necessary relationships. To bestow official recognition, the Society established its Toxicologist Certification Program in 1997, and has certified 536 members as Diplomat Toxicologists (DJSOT) as of May 1, 2016. Furthermore, on the same date, 43 JSOT members were certified as Emeritus Diplomats of the JSOT (EDJSOT). The Society has launched two official journals, the "Journal of Toxicological Sciences (JTS)" in 1981 and "Fundamental Toxicological Sciences (Fundam. Toxicol. Sci.)" in 2014. As for participation in the international organizations, the JSOT (then known as the Toxicological Research Group) joined the International Union of Toxicology as a charter member in 1980, and became a founding member of the Asian Society of Toxicology at its inauguration in 1994. Into the future, the JSOT will continue working diligently to advance knowledge and understanding of toxicology and secure its place among the interdisciplinary fields of science, humane studies, and ethics.

Health and Safety Advisory Committee (HASAC) of the International Embryo Transfer Society (IETS) has managed critical challenges for two decades.

PubMed

Thibier, M; Stringfellow, D A

2003-02-01

The International Embryo Transfer Society (IETS) was founded in 1974. Early members used the society as a forum for the exchange of scientific and technical information relevant to a newly emerging embryo transfer industry. The impact that embryo transfer could have on the international trade of livestock genetics was clear by 1982, so the IETS commissioned the Import/Export Committee. The initial challenge for this Committee was to deal with concerns about disease transmission via embryo transfer. Many of the early concerns have been dispelled, but at the time they threatened the continued development of a fledgling industry. Over the past two decades, many new critical challenges have been met and managed by this Committee, which was recently renamed the Health and Safety Advisory Committee (HASAC). Assessing risks of animal disease transmission via reproductive technologies and establishing protocols for managing these risks are still major issues for HASAC. However, additional concerns have developed as views of the society changed and as novel applications of biotechnology in farm animals were identified. This paper is intended to chronicle some of the major changes and challenges that were managed by members of the HASAC and its Subcommittees from the early years of embryo transfer to the current millennium with technological advances in molecular biology.

Sibling configuration predicts individual and descendant socioeconomic success in a modern post-industrial society.

PubMed

Lawson, David W; Makoli, Arijeta; Goodman, Anna

2013-01-01

Growing up with many siblings, at least in the context of modern post-industrial low fertility, low mortality societies, is predictive of relatively poor performance on school tests in childhood, lower levels of educational attainment, and lower income throughout adulthood. Recent studies further indicate these relationships hold across generations, so that the descendants of those who grow up with many siblings are also at an apparent socioeconomic disadvantage. In this paper we add to this literature by considering whether such relationships interact with the sex and relative age of siblings. To do this we utilise a unique Swedish multigenerational birth cohort study that provides sibling configuration data on over 10,000 individuals born in 1915-1929, plus all their direct genetic descendants to the present day. Adjusting for parental and birth characteristics, we find that the 'socioeconomic cost' of growing up in a large family is independent of both the sex of siblings and the sex of the individual. However, growing up with several older as opposed to several younger siblings is predictive of relatively poor performance on school tests and a lower likelihood of progression to tertiary education. This later-born disadvantage also holds across generations, with the children of those with many older siblings achieving lower levels of educational attainment. Despite these differences, we find that while individual and descendant income is negatively related to the number of siblings, it is not influenced by the relative age of siblings. Thus, our findings imply that the educational disadvantage of later-born children, demonstrated here and in numerous other studies, does not necessarily translate into reduced earnings in adulthood. We discuss potential explanations for this pattern of results, and consider some important directions for future research into sibling configuration and wellbeing in modern societies.

Sibling Configuration Predicts Individual and Descendant Socioeconomic Success in a Modern Post-Industrial Society

PubMed Central

Lawson, David W.; Makoli, Arijeta; Goodman, Anna

2013-01-01

Growing up with many siblings, at least in the context of modern post-industrial low fertility, low mortality societies, is predictive of relatively poor performance on school tests in childhood, lower levels of educational attainment, and lower income throughout adulthood. Recent studies further indicate these relationships hold across generations, so that the descendants of those who grow up with many siblings are also at an apparent socioeconomic disadvantage. In this paper we add to this literature by considering whether such relationships interact with the sex and relative age of siblings. To do this we utilise a unique Swedish multigenerational birth cohort study that provides sibling configuration data on over 10,000 individuals born in 1915–1929, plus all their direct genetic descendants to the present day. Adjusting for parental and birth characteristics, we find that the ‘socioeconomic cost’ of growing up in a large family is independent of both the sex of siblings and the sex of the individual. However, growing up with several older as opposed to several younger siblings is predictive of relatively poor performance on school tests and a lower likelihood of progression to tertiary education. This later-born disadvantage also holds across generations, with the children of those with many older siblings achieving lower levels of educational attainment. Despite these differences, we find that while individual and descendant income is negatively related to the number of siblings, it is not influenced by the relative age of siblings. Thus, our findings imply that the educational disadvantage of later-born children, demonstrated here and in numerous other studies, does not necessarily translate into reduced earnings in adulthood. We discuss potential explanations for this pattern of results, and consider some important directions for future research into sibling configuration and wellbeing in modern societies. PMID:24040031

The Development of Nanotechnologies and Advanced Materials Industry in Science and Entrepreneurship: Socioeconomic and Technical Indicators. A Case Study of Latvia (Part One)

NASA Astrophysics Data System (ADS)

Geipele, I.; Geipele, S.; Staube, T.; Ciemleja, G.; Zeltins, N.

2016-08-01

The present scientific paper is the first part of two publications, where the authors obtain results from the scientific research presented in a series of works on the development of the nanotechnologies and advanced materials industry in science and entrepreneurship in Latvia. The study has a focus on finding proper socioeconomic and technical indicators. It provides resume on a scope of the study. The paper contains the developed structure of engineering economic indicator system, determined groups of indicators for assessment of the development of nanotechnologies and advanced materials industry in Latvia and results of the evaluation of the obtained statistics on the economic indicators.

Green biocides, a promising technology: current and future applications to industry and industrial processes.

PubMed

Ashraf, Muhammad Aqeel; Ullah, Saleem; Ahmad, Irshad; Qureshi, Ahmad Kaleem; Balkhair, Khaled S; Abdur Rehman, Muhammad

2014-02-01

The study of biofilms has skyrocketed in recent years due to increased awareness of the pervasiveness and impact of biofilms. It costs the USA literally billions of dollars every year in energy losses, equipment damage, product contamination and medical infections. But biofilms also offer huge potential for cleaning up hazardous waste sites, filtering municipal and industrial water and wastewater, and forming biobarriers to protect soil and groundwater from contamination. The complexity of biofilm activity and behavior requires research contributions from many disciplines such as biochemistry, engineering, mathematics and microbiology. The aim of this review is to provide a comprehensive analysis of emerging novel antimicrobial techniques, including those using myriad organic and inorganic products as well as genetic engineering techniques, the use of coordination complex molecules, composite materials and antimicrobial peptides and the use of lasers as such or their modified use in combination treatments. This review also addresses advanced and recent modifications, including methodological changes, and biocide efficacy enhancing strategies. This review will provide future planners of biofilm control technologies with a broad understanding and perspective on the use of biocides in the field of green developments for a sustainable future. © 2013 Society of Chemical Industry.

Industrial wastewater advanced treatment via catalytic ozonation with an Fe-based catalyst.

PubMed

Li, Xufang; Chen, Weiyu; Ma, Luming; Wang, Hongwu; Fan, Jinhong

2018-03-01

An Fe-based catalyst was used as a heterogeneous catalyst for the ozonation of industrial wastewater, and key operational parameters (pH and catalyst dosage) were studied. The results indicated that the Fe-based catalyst significantly improved the mineralization of organic pollutants in wastewater. TOC (total organic carbon) removal was high, at 78.7%, with a catalyst concentration of 200 g/L, but only 31.6% with ozonation alone. The Fe-based catalyst significantly promoted ozone decomposition by 70% in aqueous solution. Hydroxyl radicals (·OH) were confirmed to be existed directly via EPR (electron paramagnetic resonance) experiments, and ·OH were verified to account for about 34.4% of TOC removal with NaHCO 3 as a radical scavenger. Through characterization by SEM-EDS (field emission scanning electron microscope with energy-dispersive spectrometer), XRD (X-ray powder diffraction) and XPS (X-ray photoelectron spectroscopy), it was deduced that FeOOH on the surface of the catalyst was the dominant contributor to the catalytic efficiency. The catalyst was certified as having good stability and excellent reusability based on 50 successive operations and could be used as a filler simultaneously. Thereby, it is a promising catalyst for practical industrial wastewater advanced treatment. Copyright © 2017 Elsevier Ltd. All rights reserved.

NREL Researchers Named Fellows by Prestigious Industry Societies | News |

Science.gov Websites

Haegel Nancy Haegel (Photo by Dennis Schroeder/NREL) APS annually selects no more than a half-percent of industries throughout the world. Photo of Ahmad Pesaran Ahmad Pesaran (Photo by Dennis Schroeder/NREL

Applying industrial symbiosis to chemical industry: A literature review

NASA Astrophysics Data System (ADS)

Cui, Hua; Liu, Changhao

2017-08-01

Chemical industry plays an important role in promoting the development of global economy and human society. However, the negative effects caused by chemical production cannot be ignored, which often leads to serious resource consumption and environmental pollution. It is essential for chemical industry to achieve a sustainable development. Industrial symbiosis is one of the key topics in the field of industrial ecology and circular economy, which has been identified as a creative path leading to sustainability. Based on an extensively searching for literatures on linking industrial symbiosis with chemical industry, this paper aims to review the literatures which involves three aspects: (1) economic and environmental benefits achieved by chemical industry through implementing industrial symbiosis, (2) chemical eco-industrial parks, (3) and safety issues for chemical industry. An outlook is also provided. This paper concludes that: (1) chemical industry can achieve both economic and environmental benefits by implementing industrial symbiosis, (2) establishing eco-industrial parks is essential for chemical industry to implement and improve industrial symbiosis, and (3) there is a close relationship between IS and safety issues of chemical industry.

Advancing the Growth of the U.S. Wind Industry: Federal Incentives, Funding, and Partnership Opportunities

DOE Office of Scientific and Technical Information (OSTI.GOV)

The U.S. Department of Energy's (DOE's) Wind Energy Technologies Office (WETO) works to accelerate the development and deployment of wind power. The office provides information for researchers, developers, businesses, manufacturers, communities, and others seeking various types of federal assistance available for advancing wind projects. This fact sheet outlines the primary federal incentives for developing and investing in wind power, resources for funding wind power, and opportunities to partner with DOE and other federal agencies on efforts to move the U.S. wind industry forward.

Leveraging Industry-Academia Collaborations in Adaptive Biomedical Innovation.

PubMed

Stewart, S R; Barone, P W; Bellisario, A; Cooney, C L; Sharp, P A; Sinskey, A J; Natesan, S; Springs, S L

2016-12-01

Despite the rapid pace of biomedical innovation, research and development (R&D) productivity in the pharmaceutical industry has not improved broadly. Increasingly, firms need to leverage new approaches to product development and commercial execution, while maintaining adaptability to rapid changes in the marketplace and in biomedical science. Firms are also seeking ways to capture some of the talent, infrastructure, and innovation that depends on federal R&D investment. As a result, a major transition to external innovation is taking place across the industry. One example of these external innovation initiatives is the Sanofi-MIT Partnership, which provided seed funding to MIT investigators to develop novel solutions and approaches in areas of interest to Sanofi. These projects were highly collaborative, with information and materials flowing both ways. The relatively small amount of funding and short time frame of the awards built an adaptable and flexible process to advance translational science. © 2016 American Society for Clinical Pharmacology and Therapeutics.

The application of advanced oxidation technologies to the treatment of effluents from the pulp and paper industry: a review.

PubMed

Hermosilla, Daphne; Merayo, Noemí; Gascó, Antonio; Blanco, Ángeles

2015-01-01

The paper industry is adopting zero liquid effluent technologies to reduce freshwater use and meet environmental regulations, which implies closure of water circuits and the progressive accumulation of pollutants that must be removed before water reuse and final wastewater discharge. The traditional water treatment technologies that are used in paper mills (such as dissolved air flotation or biological treatment) are not able to remove recalcitrant contaminants. Therefore, advanced water treatment technologies, such as advanced oxidation processes (AOPs), are being included in industrial wastewater treatment chains aiming to either improve water biodegradability or its final quality. A comprehensive review of the current state of the art regarding the use of AOPs for the treatment of the organic load of effluents from the paper industry is herein addressed considering mature and emerging treatments for a sustainable water use in this sector. Wastewater composition, which is highly dependent on the raw materials being used in the mills, the selected AOP itself, and its combination with other technologies, will determine the viability of the treatment. In general, all AOPs have been reported to achieve good organic removal efficiencies (COD removal >40%, and about an extra 20% if AOPs are combined with biological stages). Particularly, ozonation has been the most extensively reported and successfully implemented AOP at an industrial scale for effluent treatment or reuse within pulp and paper mills, although Fenton processes (photo-Fenton particularly) have actually addressed better oxidative results (COD removal ≈ 65-75%) at a lab scale, but still need further development at a large scale.

Tsunami Science for Society

NASA Astrophysics Data System (ADS)

Bernard, E. N.

2014-12-01

As the decade of mega-tsunamis has unfolded with new data, the science of tsunami has advanced at an unprecedented pace. Our responsibility to society should guide the use of these new scientific discoveries to better prepare society for the next tsunami. This presentation will focus on the impacts of the 2004 and 2011 tsunamis and new societal expectations accompanying enhanced funding for tsunami research. A list of scientific products, including tsunami hazard maps, tsunami energy scale, real-time tsunami flooding estimates, and real-time current velocities in harbors will be presented to illustrate society's need for relevant, easy to understand tsunami information. Appropriate use of these tsunami scientific products will be presented to demonstrate greater tsunami resilience for tsunami threatened coastlines. Finally, a scientific infrastructure is proposed to ensure that these products are both scientifically sound and represent today's best practices to protect the scientific integrity of the products as well as the safety of coastal residents.

[History of the Strasbourg Society of Biology].

PubMed

Antony, Pierre; Romier, Christophe; Mantz, Jean-Marie

2017-01-01

The Society of Biology of Strasbourg (SBS) is a learned society that was created in 1919 based on the model of the Society of Biology of which it is a subsidiary. Like its Parisian colleague, SBS aims at diffusing and promoting scientific knowledge in biology. To achieve this goal, SBS initiated since its creation a dialogue interface between researchers in biology and physicians, and more recently with other scientific disciplines, industry and the civil society. At the dawn of its first century, the Society of Biology of Strasbourg must continue to reinvent itself to pursue its development and to fulfil its mission of sharing scientific knowledge. This work continues in strong collaboration with our partners that share with SBS the willingness to foster excellence in biological research in Strasbourg, its region and beyond. © Société de Biologie, 2017.

Subsistence strategies in traditional societies distinguish gut microbiomes

PubMed Central

Obregon-Tito, Alexandra J.; Tito, Raul Y.; Metcalf, Jessica; Sankaranarayanan, Krithivasan; Clemente, Jose C.; Ursell, Luke K.; Zech Xu, Zhenjiang; Van Treuren, Will; Knight, Rob; Gaffney, Patrick M.; Spicer, Paul; Lawson, Paul; Marin-Reyes, Luis; Trujillo-Villarroel, Omar; Foster, Morris; Guija-Poma, Emilio; Troncoso-Corzo, Luzmila; Warinner, Christina; Ozga, Andrew T.; Lewis, Cecil M.

2015-01-01

Recent studies suggest that gut microbiomes of urban-industrialized societies are different from those of traditional peoples. Here we examine the relationship between lifeways and gut microbiota through taxonomic and functional potential characterization of faecal samples from hunter-gatherer and traditional agriculturalist communities in Peru and an urban-industrialized community from the US. We find that in addition to taxonomic and metabolic differences between urban and traditional lifestyles, hunter-gatherers form a distinct sub-group among traditional peoples. As observed in previous studies, we find that Treponema are characteristic of traditional gut microbiomes. Moreover, through genome reconstruction (2.2–2.5 MB, coverage depth × 26–513) and functional potential characterization, we discover these Treponema are diverse, fall outside of pathogenic clades and are similar to Treponema succinifaciens, a known carbohydrate metabolizer in swine. Gut Treponema are found in non-human primates and all traditional peoples studied to date, suggesting they are symbionts lost in urban-industrialized societies. PMID:25807110

Advanced, Energy-Efficient Hybrid Membrane System for Industrial Water Reuse

DOE Office of Scientific and Technical Information (OSTI.GOV)

Toy, Lora; Choi, Young Chul; Hendren, Zachary

In the U.S. manufacturing sector, current industrial water use practices are energy-intensive and utilize and discharge high volumes of waters, rendering them not sustainable especially in light of the growing scarcity of suitable water supplies. To help address this problem, the goal of this project was to develop an advanced, cost-effective, hybrid membrane-based water treatment system that can improve the energy efficiency of industrial wastewater treatment while allowing at least 50% water reuse efficiency. This hybrid process would combine emerging Forward Osmosis (FO) and Membrane Distillation (MD) technology components into an integrated FO-MD system that can beneficially utilize low-grade wastemore » heat (i.e., T < 450 °F) in industrial facilities to produce distilled-quality product water for reuse. In this project, laboratory-, bench-, and pilot-scale experiments on the hybrid FO-MD system were conducted for industrial wastewater treatment. It was demonstrated at laboratory, bench, and pilot scales that FO-MD membrane technology can concentrate brine to very high total dissolved solids (TDS) levels (>200,000 ppm) that are at least 2.5 times higher than the TDS level to which RO can achieve. In laboratory testing, currently available FO and MD membranes were tested to select for high-performing membranes with high salt rejection and high water flux. Multiple FO membrane/draw-salt solution combinations that gave high water flux with higher than 98% salt rejection were also identified. Reverse draw-salt fluxes were observed to be much lower for divalent salts than for monovalent salts. MD membranes were identified that had 99.9+% salt rejection and water flux as high as 50-90 L/(m 2·h) for flat-sheet membranes and >20 L/(m 2·h) for hollow fibers. In bench-scale testing, a single unit of commercially available FO and MD membrane modules were evaluated for continuous, integrated operation. Using the laboratory- and bench-scale test data, numerical

Workshop proceedings: challenges and opportunities in evaluating protein allergenicity across biotechnology industries.

PubMed

Stagg, Nicola J; Ghantous, Hanan N; Ladics, Gregory S; House, Robert V; Gendel, Steven M; Hastings, Kenneth L

2013-01-01

A workshop entitled "Challenges and Opportunities in Evaluating Protein Allergenicity across Biotechnology Industries" was held at the 51st Annual Meeting of the Society of Toxicology (SOT) in San Francisco, California. The workshop was sponsored by the Biotechnology Specialty Section of SOT and was designed to present the science-based approaches used in biotechnology industries to evaluate and regulate protein allergenicity. A panel of experts from industry and government highlighted the allergenicity testing requirements and research in the agricultural, pharmaceutical/biopharma, and vaccine biotechnology industries and addressed challenges and opportunities for advancing the science of protein allergenicity. The main learning from the workshop was that immunoglobulin E-mediated allergenicity of biotechnology-derived products is difficult to assess without human data. The approaches currently being used to evaluate potential for allergenicity across biotechnology industries are very different and range from bioinformatics, in vitro serology, in vivo animal testing, in vitro and in vivo functional assays, and "biosimilar" assessments (ie, biotherapeutic equivalents to innovator products). The challenge remains with regard to the different or lack of regulatory requirements for allergenicity testing across industries, but the novel approaches being used with bioinformatics and biosimilars may lead to opportunities in the future to collaborate across biotechnology industries.

Foresight Model of Turkey's Defense Industries' Space Studies until 2040

NASA Astrophysics Data System (ADS)

Yuksel, Nurdan; Cifci, Hasan; Cakir, Serhat

2016-07-01

Being advanced in science and technology is inevitable reality in order to be able to have a voice in the globalized world. Therefore, for the countries, making policies in consistent with their societies' intellectual, economic and political infrastructure and attributing them to the vision having been embraced by all parties of the society is quite crucial for the success. The generated policies are supposed to ensure the usage of countries' resources in the most effective and fastest way, determine the priorities and needs of society and set their goals and related roadmaps. In this sense, technology foresight studies based on justified forecasting in science and technology have critical roles in the process of developing policies. In this article, Foresight Model of Turkey's Defense Industries' Space Studies, which is turned out to be the important part of community life and fundamental background of most technologies, up to 2040 is presented. Turkey got late in space technology studies. Hence, for being fast and efficient to use its national resources in a cost effective way and within national and international collaboration, it should be directed to its pre-set goals. By taking all these factors into consideration, the technology foresight model of Turkey's Defense Industry's Space Studies was presented in the study. In the model, the present condition of space studies in the World and Turkey was analyzed; literature survey and PEST analysis were made. PEST analysis will be the inputs of SWOT analysis and Delphi questionnaire will be used in the study. A two-round Delphi survey will be applied to the participants from universities, public and private organizations operating in space studies at Defense Industry. Critical space technologies will be distinguished according to critical technology measures determined by expert survey; space technology fields and goals will be established according to their importance and feasibility indexes. Finally, for the

Advanced Manufacturing Research | NREL

Science.gov Websites

engineering research in advanced manufacturing is focused on the identification and development of advanced materials and advanced processes that drive the impact of new energy technologies. Our world-class strategies, and policy evaluation. We partner with industry to bridge innovation gaps in advanced

A Catalyst for Industry-University Partnerships

NASA Astrophysics Data System (ADS)

Senich, Donald

2004-03-01

Technology is one of the key elements that define a society or civilization. Whether technology causes everything in a society is not as important as it is to recognize that the processes of technological innovation are critical to the eveolution of a society. Industry is relying more and more on their university and small business partners to provide some of the most innovative paths to economic well being. The United States Government has established several innovative programs to assist in the technology deployment that is the underpining to the technological revolution. This presentation will examine funding trends and selected research alliances involving Industry, Government, and University collaboration. Three programs at the National Science Foundation are stimulating and encouraging the partnerships between different sectors of the technology dependent industrial community and entrepreneurs. This presentation provides a description of three of the most successful programs: Grant Opportunities for Academic Liasion with Industry (GOALI), Small Business Innovation Research Program (SBIR), and the Small Business Technology Transfer Program (STTR). By working together within the boundaries of Industry-University collaborations we can perpetuate leadership in research to develop tools, goods, services, and prosperity.

Industrial storage applications overview

NASA Technical Reports Server (NTRS)

Duscha, R. A.

1980-01-01

The implementation of a technology demonstration for the food processing industry, development and technology demonstrations for selected near-term, in-plant applications and advanced industrial applications of thermal energy storage are overviewed.

Ohio Advanced Energy Manufacturing Center

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kimberly Gibson; Mark Norfolk

2012-07-30

The program goal of the Ohio Advanced Energy Manufacturing Center (OAEMC) is to support advanced energy manufacturing and to create responsive manufacturing clusters that will support the production of advanced energy and energy-efficient products to help ensure the nation's energy and environmental security. This goal cuts across a number of existing industry segments critical to the nation's future. Many of the advanced energy businesses are starting to make the transition from technology development to commercial production. Historically, this transition from laboratory prototypes through initial production for early adopters to full production for mass markets has taken several years. Developing andmore » implementing manufacturing technology to enable production at a price point the market will accept is a key step. Since these start-up operations are configured to advance the technology readiness of the core energy technology, they have neither the expertise nor the resources to address manufacturing readiness issues they encounter as the technology advances toward market entry. Given the economic realities of today's business environment, finding ways to accelerate this transition can make the difference between success and failure for a new product or business. The advanced energy industry touches a wide range of industry segments that are not accustomed to working together in complex supply chains to serve large markets such as automotive and construction. During its first three years, the Center has catalyzed the communication between companies and industry groups that serve the wide range of advanced energy markets. The Center has also found areas of common concern, and worked to help companies address these concerns on a segment or industry basis rather than having each company work to solve common problems individually. EWI worked with three industries through public-private partnerships to sew together disparate segments helping to promote overall

Getting libraries involved in industry-university-government collaboration : Libraries should support inauguration of business and lead SME into a knowledge-based society : What Toshiaki Takeuchi does as Business Library Association's President

NASA Astrophysics Data System (ADS)

Morita, Utako

Getting libraries involved in industry-university-government collaboration : Libraries should support inauguration of business and lead SME into a knowledge-based society : What Toshiaki Takeuchi does as Business Library Association's President

Physician-industry conflict of interest: public opinion regarding industry-sponsored research.

PubMed

Fisher, Charles G; DiPaola, Christian P; Noonan, Vanessa K; Bailey, Christopher; Dvorak, Marcel F S

2012-07-01

The nature of physician-industry conflict of interest (COI) has become a source of considerable concern, but is often not discussed in the research setting. With reduced funding available from government and nonprofit sources, industry support has enthusiastically grown, but along with this comes the potential for COI that must be regulated. In this era of shared decision making in health care, society must have input into this regulation. The purpose of this study was to assess the opinions of a North American population sample on COI regarding industry-funded research and to analyze population subgroups for trends. A survey was developed for face and content validity, underwent focus group evaluation for clarity and bias reduction, and was administered via the World Wide Web. Demographic and general survey results were summarized as a percentage for each answer, and subgroup analysis was done using logistic regression. Generalizability of the sample to the US population was also assessed. Of 541 surveys, 40 were excluded due to missing information, leaving 501 surveys for analysis. The sample population was composed of more females, was older, and was more educated than a representative cross-section of the American population. Respondents support multidisciplinary surgeon-industry COI regulation and trust doctors and their professional societies the most to head this effort. Respondents trust government officials and company representatives the least with respect to regulation of COI. Most respondents feel that industry-sponsored research can involve physicians and be both objective and beneficial to patients. Most respondents in this study felt that surgeons should be involved in industry-sponsored research and that more research, regardless of funding source, will ultimately benefit patients. The majority of respondents distrust government or industry to regulate COI. The development of evidence-based treatment recommendations requires the inclusion of patient

Trends in the Information Industry.

ERIC Educational Resources Information Center

Hogan, Thomas H.

1987-01-01

The current president of the American Society for Information Science shares his observations about the information industry, identifying positive and negative trends, and discusses the role ASIS can play in the continuing growth of the industry. (Author/CLB)

Development of a noise prediction model based on advanced fuzzy approaches in typical industrial workrooms.

PubMed

Aliabadi, Mohsen; Golmohammadi, Rostam; Khotanlou, Hassan; Mansoorizadeh, Muharram; Salarpour, Amir

2014-01-01

Noise prediction is considered to be the best method for evaluating cost-preventative noise controls in industrial workrooms. One of the most important issues is the development of accurate models for analysis of the complex relationships among acoustic features affecting noise level in workrooms. In this study, advanced fuzzy approaches were employed to develop relatively accurate models for predicting noise in noisy industrial workrooms. The data were collected from 60 industrial embroidery workrooms in the Khorasan Province, East of Iran. The main acoustic and embroidery process features that influence the noise were used to develop prediction models using MATLAB software. Multiple regression technique was also employed and its results were compared with those of fuzzy approaches. Prediction errors of all prediction models based on fuzzy approaches were within the acceptable level (lower than one dB). However, Neuro-fuzzy model (RMSE=0.53dB and R2=0.88) could slightly improve the accuracy of noise prediction compared with generate fuzzy model. Moreover, fuzzy approaches provided more accurate predictions than did regression technique. The developed models based on fuzzy approaches as useful prediction tools give professionals the opportunity to have an optimum decision about the effectiveness of acoustic treatment scenarios in embroidery workrooms.

Tsunamis: bridging science, engineering and society.

PubMed

Kânoğlu, U; Titov, V; Bernard, E; Synolakis, C

2015-10-28

Tsunamis are high-impact, long-duration disasters that in most cases allow for only minutes of warning before impact. Since the 2004 Boxing Day tsunami, there have been significant advancements in warning methodology, pre-disaster preparedness and basic understanding of related phenomena. Yet, the trail of destruction of the 2011 Japan tsunami, broadcast live to a stunned world audience, underscored the difficulties of implementing advances in applied hazard mitigation. We describe state of the art methodologies, standards for warnings and summarize recent advances in basic understanding, and identify cross-disciplinary challenges. The stage is set to bridge science, engineering and society to help build up coastal resilience and reduce losses. © 2015 The Author(s).

Engagement of the medical-technology sector with society.

PubMed

Williams, David; Edelman, Elazer R; Radisic, Milica; Laurencin, Cato; Untereker, Darrel

2017-04-12

The medical-technology sector must educate society in an unbiased rational way about the successes and benefits of biotechnology innovation. Copyright © 2017, American Association for the Advancement of Science.

Surgeon-industry conflict of interest: survey of opinions regarding industry-sponsored educational events and surgeon teaching: clinical article.

PubMed

DiPaola, Christian P; Dea, Nicolas; Dvorak, Marcel F; Lee, Robert S; Hartig, Dennis; Fisher, Charles G

2014-03-01

Conflict of interest (COI) as it applies to medical education and training has become a source of considerable interest, debate, and regulation in the last decade. Companies often pay surgeons as faculty for educational events and often sponsor and give financial support to major professional society meetings. Professional medical societies, industry, and legislators have attempted to regulate potential COI without consideration for public opinion. The practice of evidence-based medicine requires the inclusion of patient opinion along with best available evidence and expert opinion. The primary goal of this study was to assess the opinion of the general population regarding surgeon-industry COI for education-related events. A Web-based survey was administered, with special emphasis on the surgeon's role in industry-sponsored education and support of professional societies. A survey was constructed to sample opinions on reimbursement, disclosure, and funding sources for educational events. There were 501 completed surveys available for analysis. More than 90% of respondents believed that industry funding for surgeons' tuition and travel for either industry-sponsored or professional society educational meetings would either not affect the quality of care delivered or would cause it to improve. Similar results were generated for opinions on surgeons being paid by industry to teach other surgeons. Moreover, the majority of respondents believed it was ethical or had no opinion if surgeons had such a relationship with industry. Respondents were also generally in favor of educational conferences for surgeons regardless of funding source. Disclosures of a surgeon-industry relationship, especially if it involves specific devices that may be used in their surgery, appears to be important to respondents. The vast majority of respondents in this study do not believe that the quality of their care will be diminished due to industry funding of educational events, for surgeon

Response to waste electrical and electronic equipments in China: legislation, recycling system, and advanced integrated process.

PubMed

Zhou, Lei; Xu, Zhenming

2012-05-01

Over the past 30 years, China has been suffering from negative environmental impacts from distempered waste electrical and electronic equipments (WEEE) recycling activities. For the purpose of environmental protection and resource reusing, China made a great effort to improve WEEE recycling. This article reviews progresses of three major fields in the development of China's WEEE recycling industry: legal system, formal recycling system, and advanced integrated process. Related laws concerning electronic waste (e-waste) management and renewable resource recycling are analyzed from aspects of improvements and loopholes. The outcomes and challenges for existing formal recycling systems are also discussed. The advantage and deficiency related to advanced integrated recycling processes for typical e-wastes are evaluated respectively. Finally, in order to achieve high disposal rates of WEEE, high-quantify separation of different materials in WEEE and high added value final products produced by separated materials from WEEE, an idea of integrated WEEE recycling system is proposed to point future development of WEEE recycling industry. © 2012 American Chemical Society

Clinical cancer advances 2008: major research advances in cancer treatment, prevention, and screening--a report from the American Society of Clinical Oncology.

PubMed

Winer, Eric; Gralow, Julie; Diller, Lisa; Karlan, Beth; Loehrer, Patrick; Pierce, Lori; Demetri, George; Ganz, Patricia; Kramer, Barnett; Kris, Mark; Markman, Maurie; Mayer, Robert; Pfister, David; Raghavan, Derek; Ramsey, Scott; Reaman, Gregory; Sandler, Howard; Sawaya, Raymond; Schuchter, Lynn; Sweetenham, John; Vahdat, Linda; Schilsky, Richard L

2009-02-10

significant clinical research is conducted increasingly overseas. In addition, talented young physicians in the United States, seeing less opportunity in the field of oncology, are choosing other specialties instead. Although greater investment in research is critical, the need for new therapies is only part of the challenge. Far too many people in the United States lack access to the treatments that already exist, leading to unnecessary suffering and death. Uninsured cancer patients are significantly more likely to die than those with insurance, racial disparities in cancer incidence and mortality remain stark, and even insured patients struggle to keep up with the rapidly rising cost of cancer therapies. As this annual American Society of Clinical Oncology report of the major cancer research advances during the last year demonstrates, we are making important progress against cancer. But sound public policies are essential to accelerate that progress. In 2009, we have an opportunity to reinvest in cancer research, and to support policies that will help ensure that every individual in the United States receives potentially life-saving cancer prevention, early detection, and treatment. Sincerely, Richard L. Schilsky, MD President American Society of Clinical Oncology.

Chemical Case Studies: Science-Society "Bonding."

ERIC Educational Resources Information Center

Hofstein, Avi; Nae, Nehemia

1981-01-01

Describes a unit designed to illustrate the "science-society-technology connection," in which three case studies of the chemical industry in Israel are presented to high school chemistry students. Chosen for the unit are case studies on copper production in Timna, on plastics, and on life from the Dead Sea. (CS)

Dynamic Modeling of Learning in Emerging Energy Industries: The Example of Advanced Biofuels in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vimmerstedt, Laura; Peterson, Steve; Bush, Brian

This paper (and its supplemental model) presents novel approaches to modeling interactions and related policies among investment, production, and learning in an emerging competitive industry. New biomass-to-biofuels pathways are being developed and commercialized to support goals for U.S. advanced biofuel use, such as those in the Energy Independence and Security Act of 2007. We explore the impact of learning rates and techno-economics in a learning model excerpted from the Biomass Scenario Model (BSM), developed by the U.S. Department of Energy and the National Renewable Energy Laboratory to explore the impact of biofuel policy on the evolution of the biofuels industry.more » The BSM integrates investment, production, and learning among competing biofuel conversion options that are at different stages of industrial development. We explain the novel methods used to simulate the impact of differing assumptions about mature industry techno-economics and about learning rates while accounting for the different maturity levels of various conversion pathways. A sensitivity study shows that the parameters studied (fixed capital investment, process yield, progress ratios, and pre-commercial investment) exhibit highly interactive effects, and the system, as modeled, tends toward market dominance of a single pathway due to competition and learning dynamics.« less

News Release: NREL's Gregg Beckham Wins Prestigious Royal Society of

Science.gov Websites

chemical engineer from the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) is the Royal Society of Chemistry, Society of Chemical Industry and Institute of Materials, Minerals and Mining a shelf of glass bottles in a laboratory. Gregg Beckham, a senior research fellow and chemical

Surgeon-industry conflict of interest: survey of North Americans' opinions regarding surgeons consulting with industry.

PubMed

DiPaola, Christian P; Dea, Nicolas; Noonan, Vanessa K; Bailey, Christopher S; Dvorak, Marcel F S; Fisher, Charles G

2014-04-01

Surgeon-industry conflict of interest (COI) has become a source of considerable interest. Professional medical societies, industry, and policy makers have attempted to regulate potential COI without consideration for public opinion. The objective of this study was to report on the opinions of individuals representing the general public regarding surgeon-industry consulting relationships. Web-based survey. Survey was administered using a "spine Web site," and opinions are collected on surgeon-industry consulting and regulation. Associations among responses to similar questions were assessed to ensure validity and subgroup analysis performed for respondent age, sex, education, insurance, employment, and patient status. Six hundred ten of 642 surveys had complete data. The sample population comprised more females and was older and more educated than the American population. About 80% of respondents felt it was ethical and either beneficial or of no influence to the quality of health care if surgeons were consultants for surgical device companies. Most felt disclosure of an industry relationship was important and paying surgeons royalties for devices, other than those they directly implant, would not affect quality of care. Respondents support multidisciplinary surgeon-industry COI regulation and trust doctors and their professional societies to head this effort. Despite the known potential negative impact of surgeon-industry COI on patient care, this study revealed that this does not seem to be reflected in the opinion of the general public. The respondents felt that disclosure is deemed one of the most important means of self-regulation and COI management, which is in agreement with current trends of most spine societies and journals that are increasing the stringency of disclosure policies. Copyright © 2014 Elsevier Inc. All rights reserved.

Society for Academic Emergency Medicine Statement on Plagiarism.

PubMed

Asher, Shellie L; Iserson, Kenneth V; Merck, Lisa H

2017-10-01

The integrity of the research enterprise is of the utmost importance for the advancement of safe and effective medical practice for patients and for maintaining the public trust in health care. Academic societies and editors of journals are key participants in guarding scientific integrity. Avoiding and preventing plagiarism helps to preserve the scientific integrity of professional presentations and publications. The Society for Academic Emergency Medicine (SAEM) Ethics Committee discusses current issues in scientific publishing integrity and provides a guideline to avoid plagiarism in SAEM presentations and publications. © 2017 by the Society for Academic Emergency Medicine.

The Story of the Plastics Industry.

ERIC Educational Resources Information Center

Masson, Don, Ed.

This is an illustrated informative booklet, designed to serve members of the Society of the Plastics Industry, Inc., and the plastics industry as a whole. It provides basic information about the industry's history and growth, plastics raw materials, typical uses of plastics, properties, and methods of processing and fabricating. (Author/DS)

Advanced Engineering Fibers.

ERIC Educational Resources Information Center

Edie, Dan D.; Dunham, Michael G.

1987-01-01

Describes Clemson University's Advanced Engineered Fibers Laboratory, which was established to provide national leadership and expertise in developing the processing equipment and advance fibers necessary for the chemical, fiber, and textile industries to enter the composite materials market. Discusses some of the laboratory's activities in…

Lifelong Learning and the Information Society.

ERIC Educational Resources Information Center

Boucouvalas, Marcie

Society is currently in the process of shifting its central focus from the production and distribution of material goods to the production and distribution of information. Indeed, data from the Bureau of Labor Statistics reveal that the majority of people are now involved in occupations that center around information rather than around industry.…

[Food industry funding and epidemiologic research in public health nutrition].

PubMed

Navarrete-Muñoz, Eva María; Tardón, Adonina; Romaguera, Dora; Martínez-González, Miguel Ángel; Vioque, Jesús

The interests of the food industry to fund nutrition and health research are not limited to promoting scientific advances. Recently, several systematic reviews conducted about the effect of sugar-sweetened beverages and health outcomes have shown some biased conclusions in studies that acknowledge industry sponsorship. In this context, the Nutrition Working Group of the Spanish Epidemiology Society presented a scientific session entitled Food industry and epidemiologic research at its annual meeting. In a round table, four experts in nutrition research presented their points of view about whether the food industry should fund nutrition-related research and the related potential conflicts of interest of the food industry. All the experts agreed not only on defending independence in nutritional epidemiology regarding the design, interpretation and conclusion of their studies but also on the crucial need for guaranteed scientific rigor, scientific quality of the results and measures to protect studies against potential biases related to the conflicts of interest of funding by the food industry. Drs Pérez-Farinós and Romaguera believe that the most effective way to prevent conflicts of interest would be not to allow the food industry to fund nutrition research; Drs Marcos and Martínez-González suggested the need to establish mechanisms and strategies to prevent the potential influences of the food industry in selecting researchers or institutional sponsorship and in the analysis and results of the studies, to ensure maximum independence for researchers, as well as their professional ethics. Copyright © 2017 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Enhancing the Industrial PhD Programme as a Policy Tool for University-Industry Cooperation

ERIC Educational Resources Information Center

Roolaht, Tõnu

2015-01-01

The changing role of universities in society includes the increasing expectation that academic institutions should engage in collaboration with companies. Industrial PhD programmes are educational tools for building bridges between the academic sector and industry. In these programmes, the PhD student studies and carries out research while being…

Policies toward advanced display in the Clinton administration

NASA Astrophysics Data System (ADS)

Hart, Jeffrey A.

1994-04-01

The Clinton administration is using its policy toward advanced displays as a test case for making industry-specific policies. They have established a number of criteria for advanced displays that they hope to apply to other industries in the future. For example, they want to support the development of generic technologies through ARPA and NIST, while minimizing the government's role in key business decisions. They want the industry (by which they mean the tool makers, the component assemblers, and the systems firms) to agree internally before they go ahead with their promotional policies. Given the past history of the advanced display industry, especially its disunity in regard to the enforcement of the successful antidumping petition of the Advanced Display Manufacturers Association and to efforts to create the U.S. Display Consortium, these criteria will be hard to meet. Nevertheless, there now appears to be much greater consensus among the three groups than in the past on the need to build indigenous technological capabilities in advanced displays.

Accelerate social development to promote the advancement of society.

PubMed

Hao, J

1995-02-01

The statement of the vice minister of the Chinese State Planning Commission emphasized the achievements made by the government in improving the quality of life of the Chinese people, protecting the environment, controlling population growth, improving health and employment, improving public and social security, and promoting national solidarity. The Chinese government will look forward to sharing the Chinese experiences with social development at the forthcoming UN World Summit on Social Development in March, 1995. Since 1980 a national program for economic development has been in force. Since 1949 and the founding of the People's Republic and particularly since 1978, many advances have been made. The Chinese government has been able to provide adequate food and clothing for a population comprising 22% of the world's population living on 7% of the world's land. Not only have basic living standards been met, but per capital disposable income has increased. Ownership of durable consumer goods has increased to the level of moderately developed countries. Radio messages reach about 80% of the population, and television reaches about 83% of the population. Family planning programs have promoted a balance among population with ecology and socioeconomic development. The rate of natural increase has declined from 25.83 in 1970 to 11.45 in 1993. The crude birth rate for the same period declined from 33.43 to 18.09. The crude death rate has remained at about 6-7 per 1000 population. The total fertility rate has been reduced to 2.0. Life expectancy has increased from 65 years to 70 years. Illiteracy among the population 15 years and older has greater improved; the illiteracy rate among youth and adults was 7% in 1993. Environmental policies have brought industrial pollution under strict control. Sewage treatment plants have been built. Natural gas and centralized heating have been promoted. Sound agricultural practices have been promoted. Reforestation efforts have resulted

The advances of Chinese non-ferrous metal mineral industry and its environmental management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miao Zewei; Gao Lin; Zhou Xiaoyuan

1998-12-31

With the steady growth of Chinese economy, the nonferrous metal industry of China was also developed quickly. The gross output of ten main nonferrous metals 4.25 million tons in 1995 so that China ranks the fourth in the world. However, a series of environmental problems also occurred, which relate to characteristics of mineral resources, techniques for mining, dressing, smelting and processing, equipment and their management level. The major pollutants include sulphur dioxide, industrial powder-dust and smoke-dust, water containing heavy metal ions as well as solid wastes. Air, water body, soil, vegetation and people`s health were polluted and damaged to differentmore » extent due to the above pollutants. For the purpose of environmental management and pollution control, some measures must be taken: (1) to strengthen environmental planning, accelerate and perfect environmental laws and related regulations as well as spread the consciousness of environmental protection energetically; (2) to extend cleaner production and adopt advanced technologies so as to reduce environmental pollution; (3) to turn the concept of the end-of-pipe management to the whole-process control; (4) to recovery or reuse the wastes fully. In addition, general situation and policies on reclamation of mining land as well as theory, methods and techniques of restoration of waste land were also stated in the paper.« less

An Assessment of the Academic Impact of Shock Society Members.

PubMed

Milgrom, Daniel P; Koniaris, Leonidas G; Valsangkar, Nakul P; Lad, Neha; Bell, Teresa M; Wojcik, Brandon; Zimmers, Teresa A

2018-05-01

Professional society membership enhances career development and productivity by offering opportunities for networking and learning about recent advances in the field. The quality and contribution of such societies can be measured in part through the academic productivity, career status, and funding success rates of their members. Here, using Scopus, NIH RePORTER, and departmental websites, we compare characteristics of the Shock Society membership to those of the top 55 NIH-funded American university and hospital-based departments of surgery. Shock Society members' mean number of publications, citations and H-indices were all significantly higher than those of non-members in surgery departments (P < 0.001). A higher percentage of members also have received funding from the NIH (42.5% vs. 18.5%, P < 0.001). Regression analysis indicated that members were more likely to have NIH funding compared with non-members (OR 1.46, 95% CI 1.12-1.916). Trauma surgeons belonging to the Shock Society had a higher number of publications and greater NIH funding than those who did not (130.4 vs. 42.7, P < 0.001; 40.4% vs. 8.5%, P < 0.001). Aggregate academic metrics from the Shock Society were superior to those of the Association for Academic Surgery and generally for the Society of University Surgeons as well. These data indicate that the Shock Society represents a highly academic and productive group of investigators. For surgery faculty, membership is associated with greater academic productivity and career advancement. While it is difficult to ascribe causation, certainly the Shock Society might positively influence careers for its members.

Small-scale societies exhibit fundamental variation in the role of intentions in moral judgment

PubMed Central

Barrett, H. Clark; Bolyanatz, Alexander; Crittenden, Alyssa N.; Fessler, Daniel M. T.; Fitzpatrick, Simon; Gurven, Michael; Henrich, Joseph; Kanovsky, Martin; Kushnick, Geoff; Pisor, Anne; Scelza, Brooke A.; Stich, Stephen; von Rueden, Chris; Zhao, Wanying; Laurence, Stephen

2016-01-01

Intent and mitigating circumstances play a central role in moral and legal assessments in large-scale industrialized societies. Although these features of moral assessment are widely assumed to be universal, to date, they have only been studied in a narrow range of societies. We show that there is substantial cross-cultural variation among eight traditional small-scale societies (ranging from hunter-gatherer to pastoralist to horticulturalist) and two Western societies (one urban, one rural) in the extent to which intent and mitigating circumstances influence moral judgments. Although participants in all societies took such factors into account to some degree, they did so to very different extents, varying in both the types of considerations taken into account and the types of violations to which such considerations were applied. The particular patterns of assessment characteristic of large-scale industrialized societies may thus reflect relatively recently culturally evolved norms rather than inherent features of human moral judgment. PMID:27035959

Small-scale societies exhibit fundamental variation in the role of intentions in moral judgment.

PubMed

Barrett, H Clark; Bolyanatz, Alexander; Crittenden, Alyssa N; Fessler, Daniel M T; Fitzpatrick, Simon; Gurven, Michael; Henrich, Joseph; Kanovsky, Martin; Kushnick, Geoff; Pisor, Anne; Scelza, Brooke A; Stich, Stephen; von Rueden, Chris; Zhao, Wanying; Laurence, Stephen

2016-04-26

Intent and mitigating circumstances play a central role in moral and legal assessments in large-scale industrialized societies. Although these features of moral assessment are widely assumed to be universal, to date, they have only been studied in a narrow range of societies. We show that there is substantial cross-cultural variation among eight traditional small-scale societies (ranging from hunter-gatherer to pastoralist to horticulturalist) and two Western societies (one urban, one rural) in the extent to which intent and mitigating circumstances influence moral judgments. Although participants in all societies took such factors into account to some degree, they did so to very different extents, varying in both the types of considerations taken into account and the types of violations to which such considerations were applied. The particular patterns of assessment characteristic of large-scale industrialized societies may thus reflect relatively recently culturally evolved norms rather than inherent features of human moral judgment.

An Astrosociological Perspective on Space-Capable vs. Spacefaring Societies

NASA Astrophysics Data System (ADS)

Pass, J.

As with any academic field, astrosociology allows for an endless number of competing theoretical models and hypotheses. One possible theoretical model is presented here that starts with the premise that even the most advanced societies today are extremely far from achieving a spacefaring status. The most advanced nation states are, in fact, space-capable societies because they have the capacity to send cargo and humans into low Earth orbit and beyond. However, their social structures and cultures lack fundamental characteristics that would allow for their designation as spacefaring societies. This article describes the characteristics of a theoretical spacefaring society and argues that getting there from our current status as space-capable societies is a long and arduous process, and it is not a definite outcome whatsoever. While a continuum is offered, it represents an imprecise path that can retrograde or fall apart at any time. Thus, this theoretical model provides one possible series of an unfolding of events that result in the creation of characteristics of the social fabric that may result in movement along the continuum toward a spacefaring society. Movement along the continuum results in an accumulation of coordinated spacefaring characteristics for a given society. Simultaneously, strictly terrestrial characteristics disappear or transform themselves into hybrid forms that include spacefaring features. This exercise demonstrates that this theoretical exercise has a number of benefits for astrosociologists conducting research in the area of spacefaring theory. Moreover, it makes the case for the idea that the study of the theoretical transformation from a space-capable to a spacefaring society includes implications for current and future 1) space policy in the public sector and 2) corporate decision-making related to space in the private sector.

Dynamic Modeling of Learning in Emerging Energy Industries: The Example of Advanced Biofuels in the United States: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vimmerstedt, Laura J.; Bush, Brian W.; Peterson, Steven O.

This paper (and its supplemental model) presents novel approaches to modeling interactions and related policies among investment, production, and learning in an emerging competitive industry. New biomass-to-biofuels pathways are being developed and commercialized to support goals for U.S. advanced biofuel use, such as those in the Energy Independence and Security Act of 2007. We explore the impact of learning rates and techno-economics in a learning model excerpted from the Biomass Scenario Model (BSM), developed by the U.S. Department of Energy and the National Renewable Energy Laboratory to explore the impact of biofuel policy on the evolution of the biofuels industry.more » The BSM integrates investment, production, and learning among competing biofuel conversion options that are at different stages of industrial development. We explain the novel methods used to simulate the impact of differing assumptions about mature industry techno-economics and about learning rates while accounting for the different maturity levels of various conversion pathways. A sensitivity study shows that the parameters studied (fixed capital investment, process yield, progress ratios, and pre-commercial investment) exhibit highly interactive effects, and the system, as modeled, tends toward market dominance of a single pathway due to competition and learning dynamics.« less

Space and biotechnology: An industry profile

NASA Technical Reports Server (NTRS)

Johnston, Richard S.; Norton, David J.; Tom, Baldwin H.

1988-01-01

The results of a study conducted by the Center for Space and Advanced Technology (CSAT) for NASA-JSC are presented. The objectives were to determine the interests and attitudes of the U.S. biotechnology industry toward space biotechnology and to prepare a concise review of the current activities of the biotechnology industry. In order to accomplish these objectives, two primary actions were taken. First, a questionnaire was designed, reviewed, and distributed to U.S. biotechnology companies. Second, reviews of the various biotechnology fields were prepared in several aspects of the industry. For each review, leading figures in the field were asked to prepare a brief review pointing out key trends and current industry technical problems. The result is a readable narrative of the biotechnology industry which will provide space scientists and engineers valuable clues as to where the space environment can be explored to advance the U.S. biotechnology industry.

Industrial ecology Prosperity Game{trademark}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beck, D.; Boyack, K.; Berman, M.

1998-03-01

Industrial ecology (IE) is an emerging scientific field that views industrial activities and the environment as an interactive whole. The IE approach simultaneously optimizes activities with respect to cost, performance, and environmental impact. Industrial Ecology provides a dynamic systems-based framework that enables management of human activity on a sustainable basis by: minimizing energy and materials usage; insuring acceptable quality of life for people; minimizing the ecological impact of human activity to levels that natural systems can sustain; and maintaining the economic viability of systems for industry, trade and commerce. Industrial ecology applies systems science to industrial systems, defining the systemmore » boundary to incorporate the natural world. Its overall goal is to optimize industrial activities within the constraints imposed by ecological viability, globally and locally. In this context, Industrial systems applies not just to private sector manufacturing and services but also to government operations, including provision of infrastructure. Sandia conducted its seventeenth Prosperity Game{trademark} on May 23--25, 1997, at the Hyatt Dulles Hotel in Herndon, Virginia. The primary sponsors of the event were Sandia National Laboratories and Los Alamos National Laboratory, who were interested in using the format of a Prosperity Game to address some of the issues surrounding Industrial Ecology. Honorary game sponsors were: The National Science Foundation; the Committee on Environmental Improvement, American Chemical Society; the Industrial and Engineering Chemistry Division, American Chemical Society; the US EPA--The Smart Growth Network, Office of Policy Development; and the US DOE-Center of Excellence for Sustainable Development.« less

Advanced glycation End-products (AGEs): an emerging concern for processed food industries.

PubMed

Sharma, Chetan; Kaur, Amarjeet; Thind, S S; Singh, Baljit; Raina, Shiveta

2015-12-01

The global food industry is expected to increase more than US $ 7 trillion by 2014. This rise in processed food sector shows that more and more people are diverging towards modern processed foods. As modern diets are largely heat processed, they are more prone to contain high levels of advanced glycation end products (AGEs). AGEs are a group of complex and heterogeneous compounds which are known as brown and fluorescent cross-linking substances such as pentosidine, non-fluorescent cross-linking products such as methylglyoxal-lysine dimers (MOLD), or non-fluorescent, non-cross linking adducts such as carboxymethyllysine (CML) and pyrraline (a pyrrole aldehyde). The chemistry of the AGEs formation, absorption and bioavailability and their patho-biochemistry particularly in relation to different complications like diabetes and ageing discussed. The concept of AGEs receptor - RAGE is mentioned. AGEs contribute to a variety of microvascular and macrovascular complications through the formation of cross-links between molecules in the basement membrane of the extracellular matrix and by engaging the receptor for advanced glycation end products (RAGE). Different methods of detection and quantification along with types of agents used for the treatment of AGEs are reviewed. Generally, ELISA or LC-MS methods are used for analysis of foods and body fluids, however lack of universally established method highlighted. The inhibitory effect of bioactive components on AGEs by trapping variety of chemical moieties discussed. The emerging evidence about the adverse effects of AGEs makes it necessary to investigate the different therapies to inhibit AGEs.

Human factors in industrial systems: 40 years on.

PubMed

Drury, Colin G

2008-06-01

I evaluate the contribution of a pioneering Human Factors special issue on human factors in industrial systems. Papers on the content of the journal's first 10 years showed that industrial human factors/ergonomics (HF/E) in 1969 was quite a rarity in the journal and the society. The 12 papers in the special issue are reviewed briefly and show a wide range of topics, including traditional industrial engineering, physical HF/E, and more mainstream applications of HF/E in this domain similar to those in military and aerospace domains. The evaluation is through citations, later journal content, society technical group membership, and specific influences of Harris's own paper in the issue. The expected direct citation influence of this special issue was not found: Citation counts were in line with all papers in Human Factors. However, other journals have been founded in North America that serve industrial HF/E and provide an outlet for more papers per year than Human Factors. In addition, the industrial domain is well represented in the Human Factors and Ergonomics Society. Finally, Harris's paper has been influential in the specific area of HF/E in inspection. Industrial HF/E is now more accepted within the HF/E community, although largely in the physical ergonomics subspecialty. There is now evidence of use of HF/E techniques more broadly in industry, including service as well manufacturing enterprises.

Industrial College of the Armed Forces Industry Studies 2003: Biotechnology

DTIC Science & Technology

2003-01-01

modern life. This critical sector of United States industry is developing products that will improve health care, agriculture , industrial processes...vaccines, antibiotics, drug therapies, and new medical devices. Agricultural advances include crops engineered to be pest resistant, to survive...pharmaceutical and agriculture sectors of the U.S. economy. As we enter the “Era of the Biomolecule,” the United States must implement policies and allocate

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 11: Computer-Aided Manufacturing & Advanced CNC, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Convergence and Commercial Momentum - Industrial Internet of Things Evolution

DOE PAGES

Fuhr, Peter L.; Morales Rodriguez, Marissa E.; Rooke, Sterling; ...

2017-03-01

Industrial instrumentation and sensors are purpose-built for applications. Rugged and proven for field applications in harsh environments, such as on an oil platform or in a copper mine 5,000-feet below ground, these instruments require reliability and performance. Before the turn of the millennium, industrial technology-and information technology (IT) in particular-drove these systems, and they often exceeded the abilities of consumer products. However, as we stand today, commercial Internet of Things (IoT) technology has advanced rapidly, with industrial control systems lagging in intelligence and features. Experienced owner-operators of industrial facilities recognize the buzz surrounding the Industrial Internet of Things (IIoT) butmore » often shun the notion of consumer-grade devices being installed and integrated into an operational control system. During the International Society of Automation (ISA) Process Control and Safety Forum (PCS) in Houston, Texas, in November 2016, ISA’s Communication Division convened a panel to focus on IIoT. Experienced industrial and control engineers on the panel expressed concerns and reservations with IIoT. Whereas some acknowledged an interest in the topic, others did not recognize it as an inevitable part of the industrial controls landscape. Granted, IIoT is still mostly a vision in the instrumentation and automation landscape; however, its place on stage is coming into view. During the opening session of PCS 2016, ISA President Jim Keaveney rhetorically asked the audience if IoT had peaked and also wondered if “cyber” would be the next area for innovation. This paper will explore the nexus of “domestic” IoT and how product evolution will drive its development toward that of IIoT.« less

Convergence and Commercial Momentum - Industrial Internet of Things Evolution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fuhr, Peter L.; Morales Rodriguez, Marissa E.; Rooke, Sterling

Industrial instrumentation and sensors are purpose-built for applications. Rugged and proven for field applications in harsh environments, such as on an oil platform or in a copper mine 5,000-feet below ground, these instruments require reliability and performance. Before the turn of the millennium, industrial technology-and information technology (IT) in particular-drove these systems, and they often exceeded the abilities of consumer products. However, as we stand today, commercial Internet of Things (IoT) technology has advanced rapidly, with industrial control systems lagging in intelligence and features. Experienced owner-operators of industrial facilities recognize the buzz surrounding the Industrial Internet of Things (IIoT) butmore » often shun the notion of consumer-grade devices being installed and integrated into an operational control system. During the International Society of Automation (ISA) Process Control and Safety Forum (PCS) in Houston, Texas, in November 2016, ISA’s Communication Division convened a panel to focus on IIoT. Experienced industrial and control engineers on the panel expressed concerns and reservations with IIoT. Whereas some acknowledged an interest in the topic, others did not recognize it as an inevitable part of the industrial controls landscape. Granted, IIoT is still mostly a vision in the instrumentation and automation landscape; however, its place on stage is coming into view. During the opening session of PCS 2016, ISA President Jim Keaveney rhetorically asked the audience if IoT had peaked and also wondered if “cyber” would be the next area for innovation. This paper will explore the nexus of “domestic” IoT and how product evolution will drive its development toward that of IIoT.« less

The Evolving Context for Science and Society

NASA Astrophysics Data System (ADS)

Leshner, Alan I.

2012-01-01

The relationship between science and the rest of society is critical both to the support it receives from the public and to the receptivity of the broader citizenry to science's explanations of the nature of the world and to its other outputs. Science's ultimate usefulness depends on a receptive public. For example, given that science and technology are imbedded in virtually every issue of modern life, either as a cause or a cure, it is critical that the relationship be strong and that the role of science is well appreciated by society, or the impacts of scientific advances will fall short of their great potential. Unfortunately, a variety of problems have been undermining the science-society relationship for over a decade. Some problems emerge from within the scientific enterprise - like scientific misconduct or conflicts of interest - and tarnish or weaken its image and credibility. Other problems and stresses come from outside the enterprise. The most obvious external pressure is that the world economic situation is undermining the financial support of both the conduct and infrastructure of science. Other examples of external pressures include conflicts between what science is revealing and political or economic expediency - e.g., global climate change - or instances where scientific advances encroach upon core human values or beliefs - e.g., scientific understanding of the origins and evolution of the universe as compared to biblical accounts of creation. Significant efforts - some dramatically non-traditional for many in the scientific community - are needed to restore balance to the science-society relationship.

Education in the Knowledge Society: Genesis of Concept and Reality

ERIC Educational Resources Information Center

Karpov, Alexander O.

2016-01-01

The aim of the article is to define the content of theoretical ideas about education in the knowledge society in terms of the birth of its social reality. It is shown that the genesis of the concept of education in the knowledge society goes back to the period of 1950-1960s and is due to the emergence of new qualities of an industrial worker that…

Mineral resources of Peru's ancient societies

USGS Publications Warehouse

Brooks, W.E.

2003-01-01

Northern Peru has an exceptionally rich archaeological heritage that includes metalwork, ceramics and textiles. The success of at least a half-dozen pre-Columbian societies dating back 3,000 years and subsequent Spanish colonization in the 1400s has rested on the effective use of northern Peru's abundant resources. In the summer of 2000, my son Matt and I learned about that connection firsthand by volunteering at the Santa Rita B archaeological site in the Chao Valley near Trujillo in northern Peru. Riding donkey-back through the Andes and talking with local people, we got our hands dirty in the rich archaeology and geology of the area. We were able to correlate mineral occurrences to their various roles in society - opening a window into the region's fascinating past. From construction to metallurgy, pre-Columbian societies flourished and advanced because of their understanding and use of the available mineral resources.

Advances in the industrial production of halal and kosher red meat.

PubMed

Farouk, Mustafa M

2013-12-01

The worldwide volume and value of trade in halal and kosher meat and co-products are huge. Muslim countries alone consumed meat estimated to be worth USD 57.2 billion in 2008. The halal and kosher principles that govern the production of red meat have many similarities, as well as some fundamental differences. Perhaps the most significant difference is that at the time of slaughter, the animal needs only to be alive to meet the minimum halal requirement, but must be both alive and conscious for kosher. It is for this reason that reversible pre-slaughter stunning is acceptable only for halal meat, although a compromise form of post-slaughter stunning is now considered kosher in some countries. Extensive research on animal physiology and welfare has characterised and optimised the methods for stunning livestock, and enabled advancement in associated technologies. This forms the basis for harmonising the religious and secular requirements for the protection of animal welfare at slaughter. These technologies and the associated processing practices for the industrial production of halal and kosher meat are reviewed in this paper. Copyright © 2013 Elsevier Ltd. All rights reserved.

Unusual Applications of Ultrasound in Industry

NASA Astrophysics Data System (ADS)

Keilman, George

The application of physical acoustics in industry has been accelerated by increased understanding of the physics of industrial processes, coupled with rapid advancements in transducers, microelectronics, data acquisition, signal processing, and related software fields. This has led to some unusual applications of ultrasound to improve industrial processes.

Real World of Industrial Chemistry: An Acid Can Be Basic.

ERIC Educational Resources Information Center

Fernelius, W. Conard, Ed.; And Others

1979-01-01

The uses of sulfuric acid in our technological society are given. The discussion includes sulfuric acid in the petroleum industry, construction industry, textile industry and in steel production. (SA)

Occupational medicine in a developing society: a case study of Venezuela.

PubMed

Guidotti, T L; Goldsmith, D F

1980-01-01

Recent activities of the World Health Organization and other international agencies have placed new emphasis on occupational health in developing nations. Venezuela is a nation in transition from a developing society dominated economically by petroleum and agriculture to an economically-diversified industrialized urban society. It provides a case study which illuminates the problems of extending occupational health services in developing economies and questions of public policy regarding utilization of medical resources and the priority that occupational health should hold in such a society. Occupational health has become a serious problem in the developing world as new industries and accelerating ecnomic development occur without adequate resources for worker protection. The study of cases such as that of Venezuela may provide guidance for anticipating and preventing problems in other nations. This paper should be considered a pilot study to explore a social aspect of occupational health that has not received adequate attention.

Future Challenges for Women in Our Society.

ERIC Educational Resources Information Center

King, Reatha Clark

Important challenges for women in American society are discussed, based on the experiences and perceptions of Reatha Clark King, president of Metropolitan State University in Minnesota. She suggests that learning to be effective in the community is a priority in order to reach greater progress in womens' advancement, since most of the key…

The Safety Pharmacology Society salary survey.

PubMed

Pugsley, Michael K; Authier, Simon; Brabham, Tiffini; Soloviev, Maxim; Markgraf, Carrie G; Correll, Krystle; Traebert, Martin; Greiter-Wilke, Andrea; Valentin, Jean-Pierre; Vargas, Hugo; Botchway, Alfred; Leishman, Derek J; Curtis, Michael J

2017-11-01

Safety pharmacology is a growing discipline with scientists broadly distributed across international geographical regions. This electronic salary survey is the first to be distributed amongst the entire Safety Pharmacology Society (SPS) membership. An electronic survey was sent to all members of the Society. Categorical survey questions assessed membership employment types, annual incomes, and professional certifications, along with other associated career attributes. This survey was distributed to the SPS membership that is comprised of safety pharmacologists, toxicologists and pharmacologists working globally in the pharmaceutical industry, at contract research organizations (CRO), regulatory agencies, and academia or within the technology provider industry. The survey was open for responses from December 2015 to March 2016. The survey response rate was 28% (129/453). North America (68%) was the region with the largest number of respondents followed by Europe (28%). A preponderance of respondents (77%) had 12years of industry experience or more. 52% of responders earned annually between $40,000 and $120,000. As expected, salary was generally positively correlated with the number of years of experience in the industry or the educational background but there was no correlation between salary and the number of employee's directly supervised. The median salary was higher for male vs female respondents, but so was median age, indicative of no gender 'salary gap'. Our 2016 SPS salary survey results showcased significant diversity regarding factors that can influence salary compensation within this discipline. These data provided insights into the complex global job market trends. They also revealed the level of scientific specialization embedded within the organization, presently uniquely positioned to support the dynamic career paths of current and future safety pharmacologists. Copyright © 2017 Elsevier Inc. All rights reserved.

Boston Society's 11th Annual Applied Pharmaceutical Analysis conference.

PubMed

Lee, Violet; Liu, Ang; Groeber, Elizabeth; Moghaddam, Mehran; Schiller, James; Tweed, Joseph A; Walker, Gregory S

2016-02-01

Boston Society's 11th Annual Applied Pharmaceutical Analysis conference, Hyatt Regency Hotel, Cambridge, MA, USA, 14-16 September 2015 The Boston Society's 11th Annual Applied Pharmaceutical Analysis (APA) conference took place at the Hyatt Regency hotel in Cambridge, MA, on 14-16 September 2015. The 3-day conference affords pharmaceutical professionals, academic researchers and industry regulators the opportunity to collectively participate in meaningful and relevant discussions impacting the areas of pharmaceutical drug development. The APA conference was organized in three workshops encompassing the disciplines of regulated bioanalysis, discovery bioanalysis (encompassing new and emerging technologies) and biotransformation. The conference included a short course titled 'Bioanalytical considerations for the clinical development of antibody-drug conjugates (ADCs)', an engaging poster session, several panel and round table discussions and over 50 diverse talks from leading industry and academic scientists.

Evolution of and projections for automated composite material placement equipment in the aerospace industry

NASA Astrophysics Data System (ADS)

McCarville, Douglas A.

2009-12-01

As the commercial aircraft industry attempts to improve airplane fuel efficiency by shifting from aluminum to composites (reinforced plastics), there is a concern that composite processing equipment is not mature enough to meet increasing demand and that delivery delays and loss of high tech jobs could result. The research questions focused on the evolution of composite placement machines, improvement of machine functionality by equipment vendors, and the probability of new inventions helping to avoid production shortfalls. An extensive review of the literature found no studies that addressed these issues. Since the early twentieth century, exploratory case study of pivotal technological advances has been an accepted means of performing historic analysis and furthering understanding of rapidly changing marketplaces and industries. This qualitative case study investigated evolution of automated placement equipment by (a) codifying and mapping patent data (e.g., claims and functionality descriptions), (b) triangulating archival data (i.e., trade literature, vender Web sites, and scholarly texts), and (c) interviewing expert witnesses. An industry-level sensitivity model developed by the author showed that expanding the vendor base and increasing the number of performance enhancing inventions will most likely allow the industry to make the transition from aluminum to composites without schedule delays. This study will promote social change by (a) advancing individual and community knowledge (e.g., teaching modules for students, practitioners, and professional society members) and (b) providing an empirical model that will help in the understanding and projection of next generation composite processing equipment demand and productivity output.

Past and present of adolescence in society: the 'teen brain' debate in perspective.

PubMed

Feixa, Carles

2011-08-01

Understood as the stage in individual life comprised between physiological puberty (a "natural" condition) and the recognition of the adult status (a "cultural" construction), adolescence has been envisaged as a universal condition, a stage in human development to be found in all societies and historical moments. Nevertheless, anthropological founding's across space and times depict a more complex panorama. The large variety of situations can be grouped into five big models of adolescence, which correspond to different types of society: "puber" from the primitive stateless societies; "ephebe" from ancient states; "boy and girl" from pre-industrial rural societies; "teenager" from the first industrialisation process and "youngsters" from modern post-industrial societies. In order to describe the features of these five models of youth, this article presents a series of ethnographical examples to illustrate the enormous plasticity of adolescence in past and present. This perspective is to be considered as the psycho-social and cultural environment for adolescent brain development, that will be discussed in depth along in this special issue. Copyright © 2011 Elsevier Ltd. All rights reserved.

The History of the Soil Science Society of Nigeria

NASA Astrophysics Data System (ADS)

Okechukwu Chude, Victor

2013-04-01

The Soil Science Society of Nigeria (SSSN) founded in 1968, is a registered member of the African Soil Science Association, International Union of Soil Science and the Global Soil Partnership. The Society aims at promoting and fostering better understanding of basic and applied Soil Science in Nigeria. The society also strives to enhance the dissemination of knowledge in all aspects of Soil science and shares ideas with National and International Societies through conferences, symposium, lectures, seminars and journal publications. The numerical strength of the society is 600 members (student, ordinary ,life and corporate). The soil science society of Nigeria has provided invaluable services in the formulation of agricultural land and fertilizer use strategies and policies of the country. The existing reconnaissance soil map of Nigeria typifies one of the major professional services rendered to the country by the society and its members. Despite the numerous contributions the society has made to the advancement of soil science in the country, the larger society is not aware of the its existence. This is largely because of our limited soil extension activities to land users due to lack of funds. If the society can attract donor funds, this will go a long way in enhancing the capacity and capability of the society.

Industrial Hygiene Laboratory accreditation: The JSC experience

NASA Technical Reports Server (NTRS)

Fadner, Dawn E.

1993-01-01

The American Industrial Hygiene Association (AIHA) is a society of professionals dedicated to the health and safety of workers and community. With more than 10,000 members, the AIHA is the largest international association serving occupational and environmental health professionals practicing industrial hygiene in private industry, academia, government, labor, and independent organizations. In 1973, AIHA developed a National Industrial Hygiene Laboratory Accreditation Program. The purposes of this program are shown.

The Familial Road to Healthy Societies: New and Converging Modes of Re-Development.

ERIC Educational Resources Information Center

Dyson, William A.

This discussion focuses on problems facing developing and developed nations and describes social changes required to meet human needs in the economic condition of scarcity facing industrializing and postindustrial societies. Current problems of developed societies are emphasized. For example, traditional health care provision in western societies…

Opportunities in the industrial biobased products industry.

PubMed

Carole, Tracy M; Pellegrino, Joan; Paster, Mark D

2004-01-01

Approximately 89 million metric t of organic chemicals and lubricants, the majority of which are fossil based, are produced annually in the United States. The development of new industrial bioproducts, for production in stand-alone facilities or biorefineries, has the potential to reduce our dependence on imported oil and improve energy security. Advances in biotechnology are enabling the optimization of feedstock composition and agronomic characteristics and the development of new and improved fermentation organisms for conversion of biomass to new end products or intermediates. This article reviews recent biotechnology efforts to develop new industrial bioproducts and improve renewable feedstocks and key market opportunities.

Responding to Industry Demands: Advanced Technology Centers.

ERIC Educational Resources Information Center

Smith, Elizabeth Brient

1991-01-01

Discusses characteristics identified by the Center for Occupational Research and Development as indicative of fully functioning advanced technology centers, including the provision of training and retraining in such areas as design, manufacturing, materials science, and electro-optics; technology transfer; demonstration sites; needs assessment;…

Strategies for development of industrial wastewater reuse in Thailand.

PubMed

Visvanathan, C; Cippe, A

2001-01-01

Majority of the industrial activities in Thailand are concentrated around Bangkok Metropolitan Area. The ever increasing industrial activities have led to over exploitation of water resources and discharge of significant pollution load. Therefore, it is important to identify the wastewater reuse potentials and develop strategies for its promotion within the industrial sector. Although technological advances have made it possible to treat effluents for industrial re-use, in practice, the Thai industries do lack in implementation of such technologies. Promotion of cleaner production concepts and advanced new technologies such as membrane technologies could assist the industry for the implementation of wastewater reuse projects in Thailand. This paper discusses various technical, institutional and management related issues to promote industrial wastewater reuse, with few case studies.

Rural Industry Clustering Towards Transitional Rural-Urban Interface

NASA Astrophysics Data System (ADS)

Nugroho, P.

2018-05-01

Rural industrialization seems to be attractive for policymakers looking for counter-urbanization efforts – and nowadays peri-urbanization forces – in line with growing decentralized autonomy of local Indonesian authorities. To promote better rural development, an extended growth pole strategy has been introduced as well as an agropolitan approach and its derivatives. In fact, there is little evidence for their success; rural autonomy remains elusive instead. However, institutional capacity of rural authorities and organizations still fails to deliver rural development initiatives properly. This research was aimed at examining this issue by looking at rural industry clustering in the Greater Solo Region, Indonesia as a response against extended urbanization in peripheral regions. The study focused on batik industry clustering in the rural periphery of Solo City, which provides a transitional rural-urban interface necessary to drive rural independence. Having inherited the batik tradition underpinned by an agriculture-led peasant society, the rural batik industrialization has reinforced the socio-economic transition from a purely agrarian society to a mixed rural-urban society. This study employed an explanatory sequential mixed-method approach, where a quantitative spatial analysis was used to identify the expansion of urbanized areas in villages, and a qualitative case study analysis to figure out the socio-economic shift in rural livelihoods. The results showed that physical spatial changes in these villages do not conform to the socio-economic change into an urban industrial society in a substantial way. Rather, the local villagers preserve an informal economy to support the existence of a mixed rural-urban livelihood.

Modeling Innovations Advance Wind Energy Industry

NASA Technical Reports Server (NTRS)

2009-01-01

In 1981, Glenn Research Center scientist Dr. Larry Viterna developed a model that predicted certain elements of wind turbine performance with far greater accuracy than previous methods. The model was met with derision from others in the wind energy industry, but years later, Viterna discovered it had become the most widely used method of its kind, enabling significant wind energy technologies-like the fixed pitch turbines produced by manufacturers like Aerostar Inc. of Westport, Massachusetts-that are providing sustainable, climate friendly energy sources today.

Humane Society International's global campaign to end animal testing.

PubMed

Seidle, Troy

2013-12-01

The Research & Toxicology Department of Humane Society International (HSI) operates a multifaceted and science-driven global programme aimed at ending the use of animals in toxicity testing and research. The key strategic objectives include: a) ending cosmetics animal testing worldwide, via the multinational Be Cruelty-Free campaign; b) achieving near-term reductions in animal testing requirements through revision of product sector regulations; and c) advancing humane science by exposing failing animal models of human disease and shifting science funding toward human biology-based research and testing tools fit for the 21st century. HSI was instrumental in ensuring the implementation of the March 2013 European sales ban for newly animal-tested cosmetics, in achieving the June 2013 cosmetics animal testing ban in India as well as major cosmetics regulatory policy shifts in China and South Korea, and in securing precedent-setting reductions in in vivo data requirements for pesticides in the EU through the revision of biocides and plant protection product regulations, among others. HSI is currently working to export these life-saving measures to more than a dozen industrial and emerging economies. 2013 FRAME.

Industrial Maintenance Technology. Technical Committee Report.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in industrial maintenance technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings,…

Deconstructing Superorganisms and Societies to Address Big Questions in Biology.

PubMed

Kennedy, Patrick; Baron, Gemma; Qiu, Bitao; Freitak, Dalial; Helanterä, Heikki; Hunt, Edmund R; Manfredini, Fabio; O'Shea-Wheller, Thomas; Patalano, Solenn; Pull, Christopher D; Sasaki, Takao; Taylor, Daisy; Wyatt, Christopher D R; Sumner, Seirian

2017-11-01

Social insect societies are long-standing models for understanding social behaviour and evolution. Unlike other advanced biological societies (such as the multicellular body), the component parts of social insect societies can be easily deconstructed and manipulated. Recent methodological and theoretical innovations have exploited this trait to address an expanded range of biological questions. We illustrate the broadening range of biological insight coming from social insect biology with four examples. These new frontiers promote open-minded, interdisciplinary exploration of one of the richest and most complex of biological phenomena: sociality. Copyright © 2017 Elsevier Ltd. All rights reserved.

Manufacturing Visions of Society and History in Textbooks.

ERIC Educational Resources Information Center

Perlmutter, David D.

1997-01-01

Finds that the secondary-school textbook vision of society is homogenized and sanitized to reduce the risk of controversy. Reveals three domains of control that influence textbook visual content: industrial (how the image world of a textbook is created); commercial (marketing pressures); and social (interest groups that influence the visual…

The orthopaedic profession and industry: conflict or convergence of interests.

PubMed

Crowninshield, Roy

2003-07-01

Many improvements in orthopaedic care have been enabled by the relationship that exists between the orthopaedic profession and the orthopaedic industry. This relationship is multifactorial and includes new technology development, medical education, orthopaedic research, and patient education. Acting individually and collectively, the profession and the industry advance their standing by focusing on improved patient care. Although the industry, the profession, and the patient have many shared interests, they also may have real or potential conflicts of interests. The patient's interest in the quality of treatment outcome is shared by the profession and industry. However, the interests of the profession may include issues related to the success of their practices, management of their time, and advancement of their skills. Industry's interests, in turn, include the support of their customers and the success of their businesses. Conflicts of interest between these parties are potentially neither avoidable nor undesirable. Managed well, the relationship of the orthopaedic profession and the industry achieves the goals of each while advancing patient care. As the profession and the industry each experience change, continued attention should be directed to ensuring that the interest of each is advanced only in the context of serving the interest of the patient with musculoskeletal disorders.

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 7: Industrial Maintenance Technology, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

American Society for Enhanced Recovery: Advancing Enhanced Recovery and Perioperative Medicine.

PubMed

Gan, Tong J; Scott, Michael; Thacker, Julie; Hedrick, Traci; Thiele, Robert H; Miller, Timothy E

2018-06-01

As the population ages, the increasing surgical volume and complexity of care are expected to place additional care delivery burdens in the perioperative setting. In this age of integrated multidisciplinary care of the surgical patients, there is increasing recognition that an evidence-based perioperative pathway is associated with the optimal outcomes. These pathways, collectively referred to as Enhanced Recovery Pathways, have resulted in shortened length of hospital stay, reduced complications, and variance in outcomes, as well as earlier return to baseline activities. The American Society for Enhanced Recovery (ASER) is a multispecialty, nonprofit international organization, dedicated to the practice of enhanced recovery in perioperative patients through education and research. Perioperative Quality Initiatives were formed whose intent is to organize a series of consensus conferences on topics of interest related to perioperative medicine. The journal affiliation between American Society for Enhanced Recovery and Anesthesia & Analgesia will enable these evidence-based practices to be disseminated widely and swiftly to the practicing perioperative health care professionals so they can be adopted to improve the quality of perioperative surgical care.

The break-even point: when medical advances are less important than improving the fidelity with which they are delivered.

PubMed

Woolf, Steven H; Johnson, Robert E

2005-01-01

Society invests billions of dollars in the development of new drugs and technologies but comparatively little in the fidelity of health care, that is, improving systems to ensure the delivery of care to all patients in need. Using mathematical arguments and a nomogram, we demonstrate that technological advances must yield dramatic, often unrealistic increases in efficacy to do more good than could be accomplished by improving fidelity. In 2 examples (the development of anti-platelet agents and statins), we show that enhanced efficacy failed to achieve the health gains that would have occurred by delivering older agents to all eligible patients. Society's huge investment in technological innovations that only modestly improve efficacy, by consuming resources needed for improved delivery of care, may cost more lives than it saves. The misalignment of priorities is driven partly by the commercial interests of industry and by the public's appetite for technological breakthroughs, but health outcomes ultimately suffer. Health, economic, and moral arguments make the case for spending less on technological advances and more on improving systems for delivering care.

Tobacco Industry Influences in the Oklahoma Legislature.

PubMed

Matheny, James D; Wagener, Theodore L; Anderson, Michael P

2015-11-01

To identify recent tobacco industry influences in the Oklahoma Legislature. Relevant public records were compiled and published online in searchable databases. Activities related to two contested tobacco-related legislative initiatives were analyzed. Analyses of voting behavior controlled for party affiliation. Legislators receiving the largest amounts of campaign contributions and gifts from tobacco lobbyists performed actions necessary to advance tobacco industry objectives. Several significant associations with voting behavior were observed, the strongest of which was between votes on a pro-tobacco industry bill and gifts from tobacco lobbyists. Most lobbyists'gifts were meals. Tobacco industry influence in the Oklahoma Legislature is enhanced through tobacco lobbyists' campaign contributions and gifts. Greater investments are made in legislative leaders, those serving as champions or spokespersons, and others taking key roles in advancing tobacco industry objectives. Exposing such influences may diminish their effects. Given the egregious and uniquely destructive behavior of the tobacco industry, lawmakers could, as an ethical matter of principle, refuse tobacco lobbyists' money and seek to remedy past harms.

Society for Research in Child Development Newsletter, 2000.

ERIC Educational Resources Information Center

Reid, Pamela Trotman, Ed.

2000-01-01

This document consists of the four 2000 issues of a newsletter disseminating information on the Society for Research in Child Development (SRCD) and providing a forum for important news, research, and information concerning advancements in child growth and development research. Each issue of the newsletter provides announcements and notices of…

Society for Research in Child Development Newsletter, 2002.

ERIC Educational Resources Information Center

Reid, Pamela Trotman, Ed.; Tucker, Thelma, Ed.

2002-01-01

This document consists of the four 2002 issues of a newsletter disseminating information on the Society for Research in Child Development (SRCD) and providing a forum for important news, research, and information concerning advancement in child growth and development research. Each issue of the newsletter includes announcements and notices of…

Brussels Declaration: a vehicle for the advancement of tobacco and alcohol industry interests at the science/policy interface?

PubMed

McCambridge, Jim; Daube, Mike; McKee, Martin

2018-06-25

The case for policies to be based on evidence appeared to gain a major boost with the publication of the Brussels Declaration, apparently with support from many leading scientists and institutions. Yet, as we show in this analysis, there are major concerns about how it was developed and, in particular, the extensive involvement of tobacco and alcohol industry actors. We describe how its coverage of conflicts of interest and vested interests is consistent with the perspectives of these same actors. The process of developing the Declaration successfully involved science advisors, other senior officials in governments and politicians in its preparation. Despite this, the final Declaration fails to address the need for safeguards to protect the integrity of science or policy from corporate interests, including in relation to the tobacco industry. This undermines Article 5.3 of the Framework Convention on Tobacco Control which seeks to protect public health policies from interference by the tobacco companies. More broadly, the Declaration offers potential to serve as a vehicle for advancing the vested interests of corporate sectors in public policymaking and appears to have been regarded in this way by a range of organisations related to the alcohol industry. This exercise is now being extended to the continent of Africa, which is strategically important to both the tobacco and alcohol industries. It will be important to study carefully to what extent initiatives like this form part of the global political strategies of tobacco and alcohol industry actors. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

IPAD: A unique approach to government/industry cooperation for technology development and transfer

NASA Technical Reports Server (NTRS)

Fulton, Robert E.; Salley, George C.

1985-01-01

A key element to improved industry productivity is effective management of Computer Aided Design / Computer Aided Manufacturing (CAD/CAM) information. To stimulate advancement, a unique joint government/industry project designated Integrated Programs for Aerospace-Vehicle Design (IPAD) was carried out from 1971 to 1984. The goal was to raise aerospace industry productivity through advancement of computer based technology to integrate and manage information involved in the design and manufacturing process. IPAD research was guided by an Industry Technical Advisory Board (ITAB) composed of over 100 representatives from aerospace and computer companies. The project complemented traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer Aided Manufacturing (ICAM) program to advance CAM technology. IPAD had unprecedented industry support and involvement and served as a unique approach to government industry cooperation in the development and transfer of advanced technology. The IPAD project background, approach, accomplishments, industry involvement, technology transfer mechanisms and lessons learned are summarized.

Change and Innovation in the Funeral Industry.

PubMed

Beard, Virginia R; Burger, William C

2017-05-01

The "modern" or traditional funeral, as it is known in the funeral industry today, that includes embalming, casket, service, and burial in a cemetery, emerged as a result of four forces in American society: the Industrial Revolution, the Civil War, the emergence of a genteel code of conduct as a result of increased wealth in our society, and changing cultural views toward death. While the traditional funeral ritual remains the most popular funeral selection in the United States today, the industry is experiencing changes that are reshaping the death rituals and methods of body disposal. A meta-analysis of relevant news articles from 1987 through 2014 finds that these changes are occurring as a result of two general motivational themes: a Business-Related Motivation and a Consumer-Related Motivation, each with corresponding subthemes.

Ceramic Technology For Advanced Heat Engines Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-12-01

Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DoD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. The objective of the project is to develop the industrial technology base required for reliable ceramicsmore » for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. This advanced materials technology is being developed in parallel and close coordination with the ongoing DOE and industry proof of concept engine development programs. To facilitate the rapid transfer of this technology to U.S. industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities. Abstracts prepared for appropriate papers.« less

Advances and prospects of Bacillus subtilis cellular factories: From rational design to industrial applications.

PubMed

Gu, Yang; Xu, Xianhao; Wu, Yaokang; Niu, Tengfei; Liu, Yanfeng; Li, Jianghua; Du, Guocheng; Liu, Long

2018-05-15

Bacillus subtilis is the most characterized gram-positive bacterium that has significant attributes, such as growing well on cheap carbon sources, possessing clear inherited backgrounds, having mature genetic manipulation methods, and exhibiting robustness in large-scale fermentations. Till date, B. subtilis has been identified as attractive hosts for the production of recombinant proteins and chemicals. By applying various systems and synthetic biology tools, the productivity features of B. subtilis can be thoroughly analyzed and further optimized via metabolic engineering. In the present review, we discussed why B. subtilis is the primary organisms used for metabolic engineering and industrial applications. Additionally, we summarized the recent advances in systems and synthetic biology, engineering strategies for improving cellular performances, and metabolic engineering applications of B. subtilis. In particular, we proposed emerging opportunities and essential strategies to enable the successful development of B. subtilis as microbial cell factories. Copyright © 2018. Published by Elsevier Inc.

Chlorinated rubbers with advanced properties for tire industry

NASA Astrophysics Data System (ADS)

Mikhaylov, I. A.; Sukhareva, K. V.; Andriasyan, Yu. O.; Popov, A. A.

2017-12-01

The paper investigates the production and processing of halide-modified chlorinated rubbers, such as isobutylene isoprene rubber and ethylene-propylene-diene-monomer rubber (IIR and EPDM), which are perspective in terms of application in rubber industry. Prospects for their production and application are determined by the specific properties of these rubbers (low gas permeability of IIR, high heat and ozone resistance of EPDM). These properties are governed by the structure of both initial IIR and EPDM and chlorinated rubbers (ChIIR and ChEPDM). A new alternative technology of obtaining chlorinated elastomers based on solid-phase mechanochemical halide modification is proposed. Novel chlorinated polyolefin rubbers obtained by the developed technology show good technological properties under industrial production conditions due to enhanced covulcanization.

Literacy Education and Sustainable Development in Developing Societies

ERIC Educational Resources Information Center

Oghenekohwo, Jonathan E.; Frank-Oputu, Ekima A.

2017-01-01

The development of a literate society is a pre-requisite for the emergence of a knowledge economy. The thesis advanced in this paper is that, without massive investment and promotion of literacy education, development that is targeted at the 17-point sustainable development goals (SDGs) will be bereft of citizen's empowerment, engagement,…

Clinical Cancer Advances 2018: Annual Report on Progress Against Cancer From the American Society of Clinical Oncology.

PubMed

Heymach, John; Krilov, Lada; Alberg, Anthony; Baxter, Nancy; Chang, Susan Marina; Corcoran, Ryan; Dale, William; DeMichele, Angela; Magid Diefenbach, Catherine S; Dreicer, Robert; Epstein, Andrew S; Gillison, Maura L; Graham, David L; Jones, Joshua; Ko, Andrew H; Lopez, Ana Maria; Maki, Robert G; Rodriguez-Galindo, Carlos; Schilsky, Richard L; Sznol, Mario; Westin, Shannon Neville; Burstein, Harold

2018-04-01

A MESSAGE FROM ASCO'S PRESIDENT I remember when ASCO first conceived of publishing an annual report on the most transformative research occurring in cancer care. Thirteen reports later, the progress we have chronicled is remarkable, and this year is no different. The research featured in ASCO's Clinical Cancer Advances 2018 report underscores the impressive gains in our understanding of cancer and in our ability to tailor treatments to tumors' genetic makeup. The ASCO 2018 Advance of the Year, adoptive cell immunotherapy, allows clinicians to genetically reprogram patients' own immune cells to find and attack cancer cells throughout the body. Chimeric antigen receptor (CAR) T-cell therapy-a type of adoptive cell immunotherapy-has led to remarkable results in young patients with acute lymphoblastic leukemia (ALL) and in adults with lymphoma and multiple myeloma. Researchers are also exploring this approach in other types of cancer. This advance would not be possible without robust federal investment in cancer research. The first clinical trial of CAR T-cell therapy in children with ALL was funded, in part, by grants from the National Cancer Institute (NCI), and researchers at the NCI Center for Cancer Research were the first to report on possible CAR T-cell therapy for multiple myeloma. These discoveries follow decades of prior research on immunology and cancer biology, much of which was supported by federal dollars. In fact, many advances that are highlighted in the 2018 Clinical Cancer Advances report were made possible thanks to our nation's support for biomedical research. Funding from the US National Institutes of Health and the NCI helps researchers pursue critical patient care questions and addresses vital, unmet needs that private industry has little incentive to take on. Federally supported cancer research generates the biomedical innovations that fuel the development and availability of new and improved treatments for patients. We need sustained federal

Advanced Combat Helmet Technical Assessment

DTIC Science & Technology

2013-05-29

Lastly, we assessed the participation of various stakeholders and industry experts such as active ACH manufacturers and test facilities. Findings... industrially accepted American National Standards Institute (ANSI Z1.4-2008, Sampling Visit us on the web at www.dodig.mil Results in Brief Advanced...statistically principled approach and the lot acceptance test protocol adopts a widely established and industrially accepted sampling procedure. We

Skills Conversion Project, Chapter 12, Leisure Industries.

ERIC Educational Resources Information Center

National Society of Professional Engineers, Washington, DC.

The Skills Conversion Project conducted by the National Society of Professional Engineers sought to study the transition mechanisms required to transfer available technical manpower from aerospace and defense industries into other areas of employment in private industry and public service. Fourteen study teams assessed the likelihood of future…

Virtual Virtu: The Moral State and the Online Re-Formation of the School and Society

ERIC Educational Resources Information Center

Laspina, James Andrew

2013-01-01

The chapter examines John Dewey's concepts of society and the public in the context of digital technology and its potential to transform society and the moral ethos of the public school. I argue that Dewey's theory of society and the public, though articulated for an industrial age, are, like his moral vision of social democracy and…

Proliferation of gynaecological scientific societies and their financial transparency: an Italian survey.

PubMed

Vercellini, Paolo; Viganò, Paola; Frattaruolo, Maria Pina; Somigliana, Edgardo

2016-01-13

To determine the number of Italian obstetrical and gynaecological societies, and to ascertain their financial transparency. Internet-based national survey and website content analysis. Currently active, not privately owned, non-religious, apolitical, obstetrical and gynaecological associations. From October 2014 to June 2015, scientific societies were identified using combinations of search terms, and examining the website of the two main Italian obstetrical and gynaecological organisations. Individual societies' websites were scrutinised by two independent investigators. Number of Italian obstetrical and gynaecological associations and its variation over time; 12 information categories defining the general characteristics of the societies and their websites, and the financial transparency of the associations. The initial web search yielded 56 professional obstetrical and gynaecological associations but nine were excluded for various reasons. Of the remaining 47 professional associations, 17 covered both obstetrics and gynaecology, four were specialised in obstetrics, 26 in gynaecology and 46 provided continuing medical education (CME) activities. The number of societies has quadrupled in the last 35 years, increasing at a mean rate of one additional society per year. The headquarters of the associations were located in the offices of a professional congress organiser in 15 instances, and advertisements or links to industry products were present in 12 societies' websites. Bylaws were accessible in 32 websites. No information was publicly available regarding competing interests, financial statements and quantitative external funding. The number of obstetrical and gynaecological societies is remarkably high in Italy, particularly in the gynaecological area. Despite CME activity provision, transparency of societies regarding financial issues and competing interests was almost non-existent. Policies addressing the interactions between medical associations and industry

Perspectives on the agrochemical industry and agrochemical discovery.

PubMed

Sparks, Thomas C; Lorsbach, Beth A

2017-04-01

Agrochemicals have been critical to the production of food and fiber, as well as the control of vectors of disease. The need for the discovery and development of new agrochemicals continues unabated due to the loss of existing products through the development of resistance, the desire for products with more favorable environmental and toxicological profiles, shifting pest spectra, and changing agricultural needs and practices. As presented in the associated analysis of the agrochemical industry, the rising costs and complexities of agrochemical discovery have, in part, led to increasing consolidation, especially in the USA and Europe. However, as demonstrated by the present analysis, the discovery of new agrochemicals continues in spite of the challenges. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

American Council of Learned Societies Annual Report, 2007-2008

ERIC Educational Resources Information Center

American Council of Learned Societies, 2009

2009-01-01

The American Council of Learned Societies (ACLS) provides the humanities and related social sciences with leadership, opportunities for innovation, and national and international representation. ACLS was founded in 1919 to represent the United States in the Union Academique Internationale. Its mission is "the advancement of humanistic studies…

Industry and the Academy: An Uncertain Alliance

ERIC Educational Resources Information Center

Drake, R. M., Jr.

1974-01-01

Discusses the divergence in interest and philosophy between the academy and industry, beginning with World War II. Suggests that engineering faculties and industry take measures to restore their rapport which is necessary for the technological society to ensure a success in man's quest for future well being and progress. (CC)

Advances toward industrialization of novel molten salt electrochemical processes.

PubMed

Ito, Yasuhiko; Nishikiori, Tokujiro; Tsujimura, Hiroyuki

2016-08-15

We have invented various novel molten salt electrochemical processes, that can be put to practical use in the fields of energy and materials. These processes are promising from both technological and commercial viewpoints, and they are currently under development for industrial application. To showcase current developments in work toward industrialization, we focus here on three of these processes: (1) electrolytic synthesis of ammonia from water and nitrogen under atmospheric pressure, (2) electrochemical formation of carbon film, and (3) plasma-induced discharge electrolysis to produce nanoparticles.

The Earthscan Industry.

ERIC Educational Resources Information Center

Aviation/Space, 1982

1982-01-01

Spurred by National Aeronautics and Space Administration (NASA) technological advances, a budding industry is manufacturing equipment and providing services toward better management of earth's resources. Topics discussed include image processing, multispectral photography, ground use sensor, and weather data receiver. (Author/JN)

Industrial applications of nanoparticles.

PubMed

Stark, W J; Stoessel, P R; Wohlleben, W; Hafner, A

2015-08-21

Research efforts in the past two decades have resulted in thousands of potential application areas for nanoparticles - which materials have become industrially relevant? Where are sustainable applications of nanoparticles replacing traditional processing and materials? This tutorial review starts with a brief analysis on what makes nanoparticles attractive to chemical product design. The article highlights established industrial applications of nanoparticles and then moves to rapidly emerging applications in the chemical industry and discusses future research directions. Contributions from large companies, academia and high-tech start-ups are used to elucidate where academic nanoparticle research has revolutionized industry practice. A nanomaterial-focused analysis discusses new trends, such as particles with an identity, and the influence of modern instrument advances in the development of novel industrial products.

Melt Infiltrated Ceramic Matrix Composites for Shrouds and Combustor Liners of Advanced Industrial Gas Turbines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gregory Corman; Krishan Luthra; Jill Jonkowski

2011-01-07

This report covers work performed under the Advanced Materials for Advanced Industrial Gas Turbines (AMAIGT) program by GE Global Research and its collaborators from 2000 through 2010. A first stage shroud for a 7FA-class gas turbine engine utilizing HiPerComp{reg_sign}* ceramic matrix composite (CMC) material was developed. The design, fabrication, rig testing and engine testing of this shroud system are described. Through two field engine tests, the latter of which is still in progress at a Jacksonville Electric Authority generating station, the robustness of the CMC material and the shroud system in general were demonstrated, with shrouds having accumulated nearly 7,000more » hours of field engine testing at the conclusion of the program. During the latter test the engine performance benefits from utilizing CMC shrouds were verified. Similar development of a CMC combustor liner design for a 7FA-class engine is also described. The feasibility of using the HiPerComp{reg_sign} CMC material for combustor liner applications was demonstrated in a Solar Turbines Ceramic Stationary Gas Turbine (CSGT) engine test where the liner performed without incident for 12,822 hours. The deposition processes for applying environmental barrier coatings to the CMC components were also developed, and the performance of the coatings in the rig and engine tests is described.« less

Actions for a New Industrial Engineering Curriculum Based on a Changing Society.

ERIC Educational Resources Information Center

Alt, Paulo Renato Campos; Massote, Alexandre Augusto; La Neve, Alessandro

Engineering schools have been interacting, more and more, with society in a very intensive way in order to deal with its necessities, integrating them in these courses and, as a consequence, preparing professionals with an adequate profile. This paper shows the author's vision about the interactions between market and communities, and which are…

The economic impact of prospective population changes in advanced industrial countries: an historical perspective.

PubMed

Easterlin, R A

1991-11-01

Demographic projections to the year 2050 for advanced industrial nations, implying low or negative population growth and a sharp rise in old age dependency, have created concerns about the long-term economic outlook in these countries. An analysis of these projections in the light of the demographic and economic experience of the past century raises doubt about these concerns. There is little empirical evidence that declining population growth has slowed the rate of economic growth. Although the burden of aged dependents will reach a new high, the projected total dependency rate is not out of line with prior experience. Thus, the ability of the working population to shoulder the burden of higher taxes to support programs for older dependents will be greater because of reduced needs to support younger dependents. This conclusion holds for a number of variant projections, the only clear exception being one that implies a mortality revolution at older ages.

NREL Employees Lauded by Industry Peers | News | NREL

Science.gov Websites

Employees Lauded by Industry Peers News Release: NREL Employees Lauded by Industry Peers April 8 ) were recently recognized by industry peers for their work in grid integration, industry advancement and , and professional development programs. The award honors the late Forest R. McFarland who was himself

Review of the 25th annual scientific meeting of the International Society for Biological Therapy of Cancer.

PubMed

Balwit, James M; Kalinski, Pawel; Sondak, Vernon K; Coulie, Pierre G; Jaffee, Elizabeth M; Gajewski, Thomas F; Marincola, Francesco M

2011-05-12

Led by key opinion leaders in the field, the 25th Annual Meeting of the International Society for Biological Therapy of Cancer (iSBTc, recently renamed the Society for Immunotherapy of Cancer, SITC) provided a scientific platform for ~500 attendees to exchange cutting-edge information on basic, clinical, and translational research in cancer immunology and immunotherapy. The meeting included keynote addresses on checkpoint blockade in cancer therapy and recent advances in therapeutic vaccination against cancer induced by Human Papilloma Virus 16. Participants from 29 countries interacted through oral presentations, panel discussions, and posters on topics that included dendritic cells and cancer, targeted therapeutics and immunotherapy, innate/adaptive immune interplay in cancer, clinical trial endpoints, vaccine combinations, countering negative regulation, immune cell trafficking to tumor microenvironment, and adoptive T cell transfer. In addition to the 50 oral presentations and >180 posters on these topics, a new SITC/iSBTc initiative to create evidence-based Cancer Immunotherapy Guidelines was announced. The SITC/iSBTc Biomarkers Taskforce announced the release of recommendations on immunotherapy biomarkers and a highly successful symposium on Immuno-Oncology Biomarkers that took place on the campus of the National Institutes of Health (NIH) immediately prior to the Annual Meeting. At the Annual Meeting, the NIH took the opportunity to publicly announce the award of the U01 grant that will fund the Cancer Immunotherapy Trials Network (CITN). In summary, the Annual Meeting gathered clinicians and scientists from academia, industry, and regulatory agencies from around the globe to interact and exchange important scientific advances related to tumor immunobiology and cancer immunotherapy.

American Council of Learned Societies Annual Report, 2008-2009

ERIC Educational Resources Information Center

American Council of Learned Societies, 2010

2010-01-01

The American Council of Learned Societies (ACLS) provides the humanities and related social sciences with leadership, opportunities for innovation, and national and international representation. ACLS was founded in 1919 to represent the United States in the Union Academique Internationale. Its mission is "the advancement of humanistic studies in…

The Casualty Actuarial Society: Helping Universities Train Future Actuaries

ERIC Educational Resources Information Center

Boa, J. Michael; Gorvett, Rick

2014-01-01

The Casualty Actuarial Society (CAS) believes that the most effective way to advance the actuarial profession is to work in partnership with universities. The CAS stands ready to assist universities in creating or enhancing courses and curricula associated with property/casualty actuarial science. CAS resources for university actuarial science…

Advanced Manufacturing Processes in the Motor Vehicle Industry

DOT National Transportation Integrated Search

1983-05-01

Advanced manufacturing processes, which include a range of automation and management techniques, are aiding U.S. motor vehicle manufacturers to reduce vehicle costs. This report discusses these techniques in general and their specific applications in...

The future of the US Space Industrial Base

NASA Astrophysics Data System (ADS)

1992-11-01

Our space industrial base has given the United States the capability to be the world's leading space-faring nation. We have exploited space to greatly advance our national security by using extraordinarily sophisticated reconnaissance space systems to guard against military surprise, and other spacecraft that support the pinpoint delivery of weapons. We have fulfilled the dreams of those visionary national leaders who enacted the first National Aeronautics and Space Act by advancing our scientific knowledge of the planet we occupy and the universe around us. And the advancements in technology engendered by the U.S. space program have had world-wide impact in fostering entire new industries. The industrial base is broad. It is not merely plant and equipment, but an entire infrastructure of skilled scientific and technical manpower backed up by superb government, private and academic facilities and institutions.

Safeguarding and Creating Jobs Is a Sign of Social Responsibility. Changing Trade Unions and Management in Germany.

ERIC Educational Resources Information Center

Horstkotte, Hermann

1998-01-01

As in many other industrialized countries, advances in computer technology are transforming Germany's industrial society into an information and services society. Increasingly fewer jobs are available in traditional industries and in the public sector. In the 1990s, Germany's trade unions and employers' associations have experienced steady…

Through the Past Decade: How Advanced Energy Design Guides have influenced the Design Industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Bing; Athalye, Rahul A.

Advanced Energy Design Guides (AEDGs) were originally developed intended to provide a simple approach to building professionals seeking energy efficient building designs better than ASHRAE Standard 90.1. Since its first book was released in 2004, the AEDG series provided inspiration for the design industry and were seen by designers as a starting point for buildings that wished to go beyond minimum codes and standards. In addition, U.S. Department of Energy’s successful Commercial Building Partnerships (CBP) program leveraged many of the recommendations from the AEDGs to achieve 50% energy savings over ASHRAE Standard 90.1-2004 for prototypical designs of large commercial entitiesmore » in the retail, banking and lodging sectors. Low-energy technologies and strategies developed during the CBP process have been applied by commercial partners throughout their national portfolio of buildings. Later, the AEDGs served as the perfect platform for both Standard 90.1 and ASHRAE’s high performance buildings standard, Standard 189.1. What was high performance a few years ago, however, has become minimum code today. Indeed, most of the prescriptive envelope component requirements in ASHRAE Standard 90.1-2013 are values recommended in the 50% AEDGs several years ago. Similarly, AEDG strategies and recommendations have penetrated the lighting and HVAC sections of both Standard 189.1 and Standard 90.1. Finally, as we look to the future of codes and standards, the AEDGs are serving as a blueprint for how minimum code requirements could be expressed. By customizing codes to specific building types, design strategies tailored for individual buildings could be prescribed as minimum code, just like in the AEDGs. This paper describes the impact that AEDGs have had over the last decade on the design industry and how they continue to influence the future of codes and Standards. From design professionals to code officials, everyone in the building industry has been affected by the

Making All People Full Members of the Society: New Direction of Lifelong Learning Policy and Practices in Japan

ERIC Educational Resources Information Center

Makino, Atsushi

2017-01-01

Nowadays in Japan, people's social existence may become less well defined as changes are brought about by social shifting. Japan is simply shifting from a society model based on an industrial society to another model, so-called a consumer society. In terms of social structure, this means shifting from the idea of society and economy assuming the…

Advanced Communications Technology Satellite (ACTS). Phase 1: Industrial/academic experimenters

NASA Technical Reports Server (NTRS)

Maisel, James E.; Nowlin, Robert W.

1992-01-01

This report presents the work done at Arizona State University under the ACTS Experimenters Program. The main thrust of the Program was to develop experiments to test, evaluate, and prove the commercial worthiness of the ACTS satellite which is scheduled for launch in 1993. To accomplish this goal, meetings were held with various governmental, industrial, and academic units to discuss the ACTS satellite and its technology and possible experiments that would generate industrial interest and support for ASU's efforts. Several local industries generated several experiments of their own. The investigators submitted several experiments of educational, medical, commercial, and technical value and interest. The disposition of these experimental proposals is discussed in this report.

Psychiatrists' relationships with industry: the principal-agent problem.

PubMed

Appelbaum, Paul S; Gold, Azgad

2010-01-01

Psychiatrists' relationships with the pharmaceutical and device industries have been a growing focus of attention, with questions raised about the impact of those relationships on prescribing practices, diagnostic criteria, practice guidelines, continuing education, conduct and reporting of research, and patients' and public trust. Indeed, these concerns exist for the medical profession as a whole, with various remedial measures proposed. We suggest that such relationships can be understood as giving rise to a "principal-agent problem," which occurs when an agent (here, a physician) is engaged to advance the interests of another party, the principal (typically a patient), but also faces incentives to promote other interests. Studies suggest that at least some relationships--which include attending industry-sponsored presentations, meeting with marketing representatives, and accepting samples--can alter psychiatrists' and other physicians' behavior in ways that can compromise patients' interests, and that industry-funded research may create bias in the medical literature. These effects are difficult to detect in specific cases, however, because of asymmetries of information and may not be apparent even to physicians themselves. Principal-agent analysis suggests that the possible responses to such problems, including appeals to ethical principles, monitoring behavior, and managing risk-inducing situations, should include consideration of aligning agents' incentives with principals' interests. This type of analysis underscores the similarity of the issues raised by physicians' relationships with industry to problems that arise more generally in society, thus reducing physicians' potential affective responses to these issues and efforts to address them. Finally, such analysis directs attention to the benefits and costs of each alternative, thereby encouraging reliance on evidence as a basis for policy.

Moral Education in a Plural Society: A Singapore Case Study.

ERIC Educational Resources Information Center

Gopinathan, S.

1980-01-01

This article examines moral education in the schools of Singapore, a highly complex society with considerable pluralism plus rapid urbanization and industrialization. Analysis of recent government reports indicates an inadequate response to moral education issues--concern for political stability and ethnic sensibilities promote generalizations…

Leisure Today--A Society Growing Older: Its Implications for Leisure.

ERIC Educational Resources Information Center

Foret, Claire M.; And Others

1993-01-01

Contains 10 articles addressing the aging of U.S. society and its impact on the leisure industry. Some topics are delivering of leisure services, leisure awareness and education, quality of life programs, group travel programs, ethnic group considerations, enhancing leisure participation, and fitness programming. (GLR)

Current situation and industrialization of Taiwan nanotechnology

NASA Astrophysics Data System (ADS)

Su, Hsin-Ning; Lee, Pei-Chun; Tsai, Min-Hua; Chien, Kuo-Ming

2007-12-01

Nanotechnology is projected to be a very promising field, and the impact of nanotechnology on society is increasingly significant as the research funding and manufactured goods increase exponentially. A clearer picture of Taiwan's current and future nanotechnology industry is an essential component for future planning. Therefore, this investigation studies the progress of industrializing nanotechnology in Taiwan by surveying 150 companies. Along with understanding Taiwan's current nanotechnology industrialization, this paper also suggests ways to promote Taiwan's nanotechnology. The survey results are summarized and serve as the basis for planning a nanotechnology industrialization strategy.

Cultural influences upon advance care planning in a family-centric society.

PubMed

Tay, Keson; Yu Lee, Rachel Jia; Sim, Shin Wei; Menon, Sumytra; Kanesvaran, Ravindran; Radha Krishna, Lalit Kumar

2017-12-01

Advanced care plans (ACPs) are designed to convey the wishes of patients with regards to their care in the event of incapacity. There are a number of prerequisites for creation of an effective ACP. First, the patient must be aware of their condition, their prognosis, the likely trajectory of the illness, and the potential treatment options available to them. Second, patient input into ACP must be free of any coercive factors. Third, the patient must be able to remain involved in adapting their ACP as their condition evolves. Continued use of familial determination and collusion within the local healthcare system, however, has raised concerns that the basic requirements for effective ACP cannot be met. To assess the credibility of these concerns, we employed a video vignette approach depicting a family of three adult children discussing whether or not to reveal a cancer diagnosis to their mother. Semistructured interviews with 72 oncology patients and 60 of their caregivers were conducted afterwards to explore the views of the participants on the different positions taken by the children. Collusion, family-centric decision making, adulteration of information provided to patients, and circumnavigation of patient involvement appear to be context-dependent. Patients and families alike believe that patients should be told of their conditions. However, the incidence of collusion and familial determination increases with determinations of a poor prognosis, a poor anticipated response to chemotherapy, and a poor premorbid health status. Financial considerations with respect to care determinations remain secondary considerations. Our data suggest that ACPs can be effectively constructed in family-centric societies so long as healthcare professionals continue to update and educate families on the patient's situation. Collusion and familial intervention in the decision-making process are part of efforts to protect the patient from distress and are neither solely dependent on

Are industry financial ties associated with greater scholarly impact among academic otolaryngologists?

PubMed

Svider, Peter F; Bobian, Michael; Lin, Ho-Sheng; Setzen, Michael; Baredes, Soly; Eloy, Jean Anderson; Folbe, Adam J

2017-01-01

In response to concerns regarding physician-industry relationships, the Physician Sunshine Act of 2010 was passed in an effort to increase transparency and accountability. Our objective was to determine whether there is an association between industry support and scholarly impact among academic otolaryngologists. Faculty listings, academic rank, and fellowship training of academic otolaryngologists were accessed from departmental websites. H-indices, number of publications, and publication range (years) of each individual were calculated using the Scopus database. The Center for Medicare and Medicaid Services Open Payments database was used to determine industry payments during 2014 to each otolaryngologist. Of 1,515 otolaryngologists, 65.4% received industry support and 15.8% received support > $1,000. No difference in impact, as measured by the h-index, was noted upon comparison of those receiving support and those who did not (P > 0.05). Individuals receiving > $1,000 had higher h-indices and total publications than those receiving < $1,000 or receiving no support (H = 17.8 vs. 10.9, P < 0.0001), even upon controlling for academic seniority. Upon organization by subspecialty, individuals receiving > $1,000 had greater scholarly impact among most subspecialties. Industry contributions increased with advancing experience. Receiving industry contributions greater than $1,000 is associated with greater scholarly impact among academic otolaryngologists. In a smaller surgical specialty, such as otolaryngology-head and neck surgery, direct industry research support-as well as indirect contributions through the support of educational programs, consulting, and other expenses-potentially impacts scholarly discourse; these findings do not reflect a causal relationship and may require further characterization. NA Laryngoscope, 127:87-94, 2017. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

Society of American Foresters - an advocacy for forest inventory

Treesearch

John W., Jr. Moser

2007-01-01

The Society of American Foresters (SAF) represents all segments of the forestry profession in the United States, including public and private practitioners, researchers, administrators, educators, and students. Its mission is to advance the science, education, technology, and practice of forestry. SAF's science and education program and its policy program have...

The Renewed Community; Pursuing Quality in an Urbanizing Society.

ERIC Educational Resources Information Center

Buck, Roy C., Ed.; Lyons, William E., Ed.

Numerous readings on the urbanizing society are presented, with guidelines for study and discussion, session by session. The first three sessions cover community development as a point of view and problems of a changing economic base--fixed human and nonhuman assets as aids and obstacles, and a realistic policy of industrial development. Two…

Chemical Industry, the Environment, and Russian Provincial Society: The Case of the Kokshan Chemical Works (1850-1925).

PubMed

Vinogradov, Andrei; Petriashin, Stanislav

2018-05-01

This article explores interactions between the chemical industry, the environment, and Russian provincial society in the late nineteenth and early twentieth centuries, using the example of the Kokshan chemical works, in the Elabuga District, Viatka Province, Russian Empire (today Mendeleevsk District, Republic of Tatarstan, Russian Federation). The plant's location facilitated its rapid development due to a number of factors, including a cheap labour force, the availability of raw materials, and the absence of local competition. However, the factory's development came in conjunction with the deterioration of the environment and subsequent health problems for employees and the surrounding population. Conflicts connected with the Kokshan works illustrate differences between this case and similar examples in Russia and Europe. In Viatka Province, the local community remained mostly silent regarding these issues, and made no demands for improving sanitary control and working conditions or reducing pollution; rather, it was distant activists who personally suffered no harm who intervened in the interest of social justice. The history of the company reflects the contrast between the transfer of European technological innovations to Russia and laborious efforts to increase national wealth on the one hand, and the exploitation of the environment and endangerment of workers' health on the other.

2001 Industry Studies: Financial Services

DTIC Science & Technology

2001-01-01

financial services firms are also positioning to compete here and abroad with international firms. Advances in information technology continue to provide...future. A veritable revolution is taking place within the financial services industry. Globalization, information technology and continuing... technological infrastructure that must be protected. Industry vulnerabilities will continue to increase as use of the Internet , e-commerce, and e-banking become

Advanced Education Business Plan 2005-2008

ERIC Educational Resources Information Center

Alberta Advanced Education, 2005

2005-01-01

In collaboration with learning providers, the advanced education system, industry, communities, government agencies and non-governmental organizations, Advanced Education strives to create accessible, affordable and quality learning opportunities that are responsive to the ongoing learning needs of Albertans. The Ministry's 2005-08 Business Plan…

Productivity Increased in 1981 in Most Industries Measured.

ERIC Educational Resources Information Center

Herman, Arthur S.

1982-01-01

Although productivity growth slowed during 1976-81 for most of the industries surveyed, a majority of significant industries showed advances in output per employee hour in 1981. The growth in industry productivity was consistent with the gain in the nonfarm business sector of the economy, which grew 1.4 percent. (SSH)

Towards integrative risk management and more resilient societies

NASA Astrophysics Data System (ADS)

Al-Khudhairy, D.; Axhausen, K.; Bishop, S.; Herrmann, H.; Hu, B.; Kröger, W.; Lewis, T.; MacIntosh, J.; Nowak, A.; Pickl, S.; Stauffacher, D.; Tan, E.

2012-11-01

Society depends decisively on the availability of infrastructure systems such as energy, telecommunication, transportation, banking and finance, health care and governmental and public administration. Even selective damages of one of these infrastructures may result in disruptions of governmental, industrial or public functions. Vulnerability of infrastructures therefore provides spectacular leverage for natural disasters as well as criminal and terrorist actions. Threats and risks are part of the technological, economical, and societal development. This article focuses on the development and characterization of an integrative risk-management which, from the perspective of "resilient systems", can be seen as an innovative and pro-active crisis management approach dealing with the increasing amount of complexity in societies in a comprehensive, agile and adaptive way.

New Technology Industries. Skills Task Force Research Paper 10.

ERIC Educational Resources Information Center

Hendry, Chris

This paper provides an overview of the growth of new technology industries in Great Britain and the skills needed for these industries. The industries are advanced materials, biotechnology, and opto-electronics. The report profiles the current status, expected growth, and skills needed for each of these industry sectors. It also points out the…

Energy and the English Industrial Revolution.

PubMed

Wrigley, E A

2013-03-13

Societies before the Industrial Revolution were dependent on the annual cycle of plant photosynthesis for both heat and mechanical energy. The quantity of energy available each year was therefore limited, and economic growth was necessarily constrained. In the Industrial Revolution, energy usage increased massively and output rose accordingly. The energy source continued to be plant photosynthesis, but accumulated over a geological age in the form of coal. This poses a problem for the future. Fossil fuels are a depleting stock, whereas in pre-industrial time the energy source, though limited, was renewed each year.

Intergenerational Wealth Transmission and the Dynamics of Inequality in Small-Scale Societies*

PubMed Central

Mulder, Monique Borgerhoff; Bowles, Samuel; Hertz, Tom; Bell, Adrian; Beise, Jan; Clark, Greg; Fazzio, Ila; Gurven, Michael; Hill, Kim; Hooper, Paul L.; Irons, William; Kaplan, Hillard; Leonetti, Donna; Low, Bobbi; Marlowe, Frank; McElreath, Richard; Naidu, Suresh; Nolin, David; Piraino, Patrizio; Quinlan, Rob; Schniter, Eric; Sear, Rebecca; Shenk, Mary; Smith, Eric Alden; von Rueden, Christopher; Wiessner, Polly

2009-01-01

Small-scale human societies range from foraging bands with a strong egalitarian ethos to more economically stratified agrarian and pastoral societies. We explain this variation in inequality using a dynamic model in which a population’s long-run steady-state level of inequality depends on the extent to which its most important forms of wealth are transmitted within families across generations. We estimate the degree of intergenerational transmission of three different types of wealth (material, embodied, and relational) as well as the extent of wealth inequality in 21 historical and contemporary populations. We show that intergenerational transmission of wealth and wealth inequality are substantial among pastoral and small-scale agricultural societies (on a par with or even exceeding the most unequal modern industrial economies) and quite limited among horticultural and foraging peoples (equivalent to the most egalitarian of modern industrial populations). Differences in the technology by which a people derive their livelihood and in the institutions and norms making up the economic system jointly contribute to this pattern. PMID:19900925

The Division of Labor and Leisure in Modern Society: A New Form of Solidarity.

ERIC Educational Resources Information Center

Bosserman, Phillip

The paper suggests that new values created by modern forms of leisure have intersected with critical changes in the work structure to form a new social pattern. The new pattern emerges from a crisis in industrial societies. Factors which have created this crisis include the rupture of the time frames of society (how work and non-work are…

Pharmacist-industry relationships.

PubMed

Saavedra, Keene; O'Connor, Bonnie; Fugh-Berman, Adriane

2017-12-01

The purpose of this study was to document, in their own words, beliefs and attitudes that American pharmacists have towards the pharmaceutical industry and pharmacists' interactions with industry. An ethnographic-style qualitative study was conducted utilizing open-ended interviews with four hospital pharmacists, two independent pharmacists, two retail pharmacists and one administrative pharmacist in the Washington, DC, metropolitan area to elicit descriptions of and attitudes towards pharmacists' relationships with industry. Analysis of the qualitative material followed established ethnographic conventions of narrative thematic analysis. All pharmacists reported interactions with pharmaceutical company representatives. Most had received free resources or services from industry, including educational courses. Respondents uniformly believed that industry promotional efforts are primarily directed towards physicians. Although respondents felt strongly that drug prices were excessive and that 'me-too' drugs were of limited use, they generally had a neutral-to-positive view of industry-funded adherence/compliance programmes, coupons, vouchers, and copay payment programmes. Interviewees viewed direct-to-consumer advertising negatively, but had a generally positive view of industry-funded drug information. Pharmacists may represent a hitherto under-identified cohort of health professionals who are targeted for industry influence; expanding roles for pharmacists may make them even more attractive targets for future industry attention. Pharmacy schools should ensure that students learn to rely on unbiased information sources and should teach students about conflicts of interest and the risks of interacting with industry. Further research should be conducted on the extent to which pharmacists' attitudes towards their duties and towards drug assessment and recommendation are influenced by the pharmaceutical industry. © 2017 Royal Pharmaceutical Society.

Panelists Remarks -- The Start of the Forum on Physics and Society

NASA Astrophysics Data System (ADS)

Schwartz, Brian

2012-03-01

The early days of the Forum on Physics and Society, its leadership and programs will be reviewed. Science was late in joining the major changes taking place in American society in the late 1960s. At the time, APS and other professional science societies were limited to research, education and history. The concept that the APS would, at its meetings, deal with physics and society matters was not seen as part of the Society's mission. At the time there was turmoil in American society concerning the Vietnam War, civil rights, free speech issues and the military-industrial complex. Also exacerbating the situation was the sharp downturn of employment opportunities for the large numbers of Ph.D. scientist produced by the post sputnik encouragement and funding of science education. I and Emanuel Maxwell of MIT collected the 1 percent (approximately 200) signatures of the then APS membership required to establish a new unit to be named, The Division of Physics and Society. This resulted in much debate within the Society and ultimately resolved with the establishment of new class of APS units designated as Forums.

Integrating an Awareness of Selfhood and Society into Virtual Learning

ERIC Educational Resources Information Center

Stricker, Andrew, Ed.; Calongne, Cynthia, Ed.; Truman, Barbara, Ed.; Arenas, Fil, Ed.

2017-01-01

Recent technological advances have opened new platforms for learning and teaching. By utilizing virtual spaces, more educational opportunities are created for students who cannot attend a physical classroom environment. "Integrating an Awareness of Selfhood and Society into Virtual Learning" is a pivotal reference source that discusses…

Customer service: developing a new mindset for today's instant gratification society.

PubMed

Stockburger, W T

1998-01-01

Today's society expects and demands immediate service, results and access to information. Can those of us in leadership positions say that the service we provide is equal to or exceeds what our customers expect? How can we redesign our services so they are better than those we currently provide? Some people look to advances in technology as one means to improve services and access to information, but this should not be the only means. If we are to develop a philosophy of exceptional service, we must develop a vision of those services. We must gain an understanding of our customers, plus a knowledge of products, the availability of resources and any industry constraints. In healthcare, we must look to leadership to achieve our goals. A goal of exceptional customer service must be communicated to all levels of service providers from management. Top-down action by management--leadership by example--is critical. Leadership must gain the trust of both customers and employees by actively listening to both verbal and nonverbal comments at all points of service. Without an understanding of our customers' needs, it won't be possible to deliver services at or above their expectations.

Advanced process control framework initiative

NASA Astrophysics Data System (ADS)

Hill, Tom; Nettles, Steve

1997-01-01

The semiconductor industry, one the world's most fiercely competitive industries, is driven by increasingly complex process technologies and global competition to improve cycle time, quality, and process flexibility. Due to the complexity of these problems, current process control techniques are generally nonautomated, time-consuming, reactive, nonadaptive, and focused on individual fabrication tools and processes. As the semiconductor industry moves into higher density processes, radical new approaches are required. To address the need for advanced factory-level process control in this environment, Honeywell, Advanced Micro Devices (AMD), and SEMATECH formed the Advanced Process Control Framework Initiative (APCFI) joint research project. The project defines and demonstrates an Advanced Process Control (APC) approach based on SEMATECH's Computer Integrated Manufacturing (CIM) Framework. Its scope includes the coordination of Manufacturing Execution Systems, process control tools, and wafer fabrication equipment to provide necessary process control capabilities. Moreover, it takes advantage of the CIM Framework to integrate and coordinate applications from other suppliers that provide services necessary for the overall system to function. This presentation discusses the key concept of model-based process control that differentiates the APC Framework. This major improvement over current methods enables new systematic process control by linking the knowledge of key process settings to desired product characteristics that reside in models created with commercial model development tools The unique framework-based approach facilitates integration of commercial tools and reuse of their data by tying them together in an object-based structure. The presentation also explores the perspective of each organization's involvement in the APCFI project. Each has complementary goals and expertise to contribute; Honeywell represents the supplier viewpoint, AMD represents the user

From Information Society to Knowledge Society: The Ontology Issue

NASA Astrophysics Data System (ADS)

Roche, Christophe

2002-09-01

Information society, virtual enterprise, e-business rely more and more on communication and knowledge sharing between heterogeneous actors. But, no communication is possible, and all the more so no co-operation or collaboration, if those actors do not share the same or at least a compatible meaning for the terms they use. Ontology, understood as an agreed vocabulary of common terms and meanings, is a solution to that problem. Nevertheless, although there is quite a lot of experience in using ontologies, several barriers remain which stand against a real use of ontology. As a matter of fact, it is very difficult to build, reuse and share ontologies. We claim that the ontology problem requires a multidisciplinary approach based on sound epistemological, logical and linguistic principles. This article presents the Ontological Knowledge Station (OK Station©), a software environment for building and using ontologies which relies on such principles. The OK Station is currently being used in several industrial applications.

Affiliate transactions and electric industry restructuring

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zeigler, B.T.

1995-10-01

All society benefits when society`s economic resources are used more efficiently. The lesson of recent history is that market forces of risk and reward result in the most efficient use of those resources. Affiliate transaction rules that skew or blunt the market forces of risk and reward are antithetical to the goals motivating restructuring in the first place. This article is about affiliate transaction rules and why restructuring of the electric industry makes them very important. The reason for their importance lies in the relationship between regulatory and corporate restructuring. The most visible process underway today in the electric industrymore » is that of regulatory restructuring. In that process, regulators are redefining the industry`s natural monopoly functions more narrowlyy. Their intention is to limit regulation to those narrowly defined functions. The remaining functions they will then open to competition and market regulation. As a result of this process, what was once a single vertically integrated utility business will become a collection of regulated and unregulated businesses, each operating at a different level of the industry. It is only logical that these newley redefined businesses will require business cultures, compensation plans and capital structures that reflect the different rules under which they operate. Why restructure regulation at all unless restructuring will result in different - and more efficient - business behavior? For a host of reasons, it is very difficult to manage regulated and unregulated business as part of the same corporation. The most effective way to create separate business identities for these newly redefined businesses is to place them in separate corporations.« less

Proliferation of gynaecological scientific societies and their financial transparency: an Italian survey

PubMed Central

Vercellini, Paolo; Viganò, Paola; Frattaruolo, Maria Pina; Somigliana, Edgardo

2016-01-01

Objectives To determine the number of Italian obstetrical and gynaecological societies, and to ascertain their financial transparency. Design Internet-based national survey and website content analysis. Participants Currently active, not privately owned, non-religious, apolitical, obstetrical and gynaecological associations. Methods From October 2014 to June 2015, scientific societies were identified using combinations of search terms, and examining the website of the two main Italian obstetrical and gynaecological organisations. Individual societies’ websites were scrutinised by two independent investigators. Primary and secondary outcome measures Number of Italian obstetrical and gynaecological associations and its variation over time; 12 information categories defining the general characteristics of the societies and their websites, and the financial transparency of the associations. Results The initial web search yielded 56 professional obstetrical and gynaecological associations but nine were excluded for various reasons. Of the remaining 47 professional associations, 17 covered both obstetrics and gynaecology, four were specialised in obstetrics, 26 in gynaecology and 46 provided continuing medical education (CME) activities. The number of societies has quadrupled in the last 35 years, increasing at a mean rate of one additional society per year. The headquarters of the associations were located in the offices of a professional congress organiser in 15 instances, and advertisements or links to industry products were present in 12 societies’ websites. Bylaws were accessible in 32 websites. No information was publicly available regarding competing interests, financial statements and quantitative external funding. Conclusions The number of obstetrical and gynaecological societies is remarkably high in Italy, particularly in the gynaecological area. Despite CME activity provision, transparency of societies regarding financial issues and competing interests

Improving industrial yeast strains: exploiting natural and artificial diversity.

PubMed

Steensels, Jan; Snoek, Tim; Meersman, Esther; Picca Nicolino, Martina; Voordeckers, Karin; Verstrepen, Kevin J

2014-09-01

Yeasts have been used for thousands of years to make fermented foods and beverages, such as beer, wine, sake, and bread. However, the choice for a particular yeast strain or species for a specific industrial application is often based on historical, rather than scientific grounds. Moreover, new biotechnological yeast applications, such as the production of second-generation biofuels, confront yeast with environments and challenges that differ from those encountered in traditional food fermentations. Together, this implies that there are interesting opportunities to isolate or generate yeast variants that perform better than the currently used strains. Here, we discuss the different strategies of strain selection and improvement available for both conventional and nonconventional yeasts. Exploiting the existing natural diversity and using techniques such as mutagenesis, protoplast fusion, breeding, genome shuffling and directed evolution to generate artificial diversity, or the use of genetic modification strategies to alter traits in a more targeted way, have led to the selection of superior industrial yeasts. Furthermore, recent technological advances allowed the development of high-throughput techniques, such as 'global transcription machinery engineering' (gTME), to induce genetic variation, providing a new source of yeast genetic diversity. © 2014 The Authors. FEMS Microbiology Reviews published by John Wiley & Sons Ltd on behalf of Federation of European Microbiological Societies.

Uncovering Randomness and Success in Society

PubMed Central

Jalan, Sarika; Sarkar, Camellia; Madhusudanan, Anagha; Dwivedi, Sanjiv Kumar

2014-01-01

An understanding of how individuals shape and impact the evolution of society is vastly limited due to the unavailability of large-scale reliable datasets that can simultaneously capture information regarding individual movements and social interactions. We believe that the popular Indian film industry, “Bollywood”, can provide a social network apt for such a study. Bollywood provides massive amounts of real, unbiased data that spans more than 100 years, and hence this network has been used as a model for the present paper. The nodes which maintain a moderate degree or widely cooperate with the other nodes of the network tend to be more fit (measured as the success of the node in the industry) in comparison to the other nodes. The analysis carried forth in the current work, using a conjoined framework of complex network theory and random matrix theory, aims to quantify the elements that determine the fitness of an individual node and the factors that contribute to the robustness of a network. The authors of this paper believe that the method of study used in the current paper can be extended to study various other industries and organizations. PMID:24533073

Uncovering randomness and success in society.

PubMed

Jalan, Sarika; Sarkar, Camellia; Madhusudanan, Anagha; Dwivedi, Sanjiv Kumar

2014-01-01

An understanding of how individuals shape and impact the evolution of society is vastly limited due to the unavailability of large-scale reliable datasets that can simultaneously capture information regarding individual movements and social interactions. We believe that the popular Indian film industry, "Bollywood", can provide a social network apt for such a study. Bollywood provides massive amounts of real, unbiased data that spans more than 100 years, and hence this network has been used as a model for the present paper. The nodes which maintain a moderate degree or widely cooperate with the other nodes of the network tend to be more fit (measured as the success of the node in the industry) in comparison to the other nodes. The analysis carried forth in the current work, using a conjoined framework of complex network theory and random matrix theory, aims to quantify the elements that determine the fitness of an individual node and the factors that contribute to the robustness of a network. The authors of this paper believe that the method of study used in the current paper can be extended to study various other industries and organizations.

Science-and-Technology-oriented-Society and Man

NASA Astrophysics Data System (ADS)

Fukui, Ken'ichi

This is a special lecture at the 30th anniversary of JICST. To develop science-and-te chnology-oriented society it is important to evaluate and select infinite information resources on science and technology, and to reorganize and apply them. This also relates to humanity. For the future, we have to establish scientific ethics that can exceed the expedience of science and technology. To be concrete, we have to create new industrial value that recovers and reclaims natural resources which men had wasted so far, and we have to establish a new technology to distribute maldistributed industrial benefits equally. And then, the selfcontrol of the human aiming at the harmony of nature and man will secure human liberty, and it will be done by the good function of man's brain.

An Official American Thoracic Society Research Statement: Current Challenges Facing Research and Therapeutic Advances in Airway Remodeling.

PubMed

Prakash, Y S; Halayko, Andrew J; Gosens, Reinoud; Panettieri, Reynold A; Camoretti-Mercado, Blanca; Penn, Raymond B

2017-01-15

Airway remodeling (AR) is a prominent feature of asthma and other obstructive lung diseases that is minimally affected by current treatments. The goals of this Official American Thoracic Society (ATS) Research Statement are to discuss the scientific, technological, economic, and regulatory issues that deter progress of AR research and development of therapeutics targeting AR and to propose approaches and solutions to these specific problems. This Statement is not intended to provide clinical practice recommendations on any disease in which AR is observed and/or plays a role. An international multidisciplinary group from within academia, industry, and the National Institutes of Health, with expertise in multimodal approaches to the study of airway structure and function, pulmonary research and clinical practice in obstructive lung disease, and drug discovery platforms was invited to participate in one internet-based and one face-to-face meeting to address the above-stated goals. Although the majority of the analysis related to AR was in asthma, AR in other diseases was also discussed and considered in the recommendations. A literature search of PubMed was performed to support conclusions. The search was not a systematic review of the evidence. Multiple conceptual, logistical, economic, and regulatory deterrents were identified that limit the performance of AR research and impede accelerated, intensive development of AR-focused therapeutics. Complementary solutions that leverage expertise of academia and industry were proposed to address them. To date, numerous factors related to the intrinsic difficulty in performing AR research, and economic forces that are disincentives for the pursuit of AR treatments, have thwarted the ability to understand AR pathology and mechanisms and to address it clinically. This ATS Research Statement identifies potential solutions for each of these factors and emphasizes the importance of educating the global research community as to the

The Impact of Corrosion on Society

NASA Astrophysics Data System (ADS)

Hansson, C. M.

2011-10-01

Almost all metals and alloys are unstable in the Earth's atmosphere and will always be susceptible to corrosion. The basic principles of corrosion are briefly described in order to explain the observations of corrosion, which render our personal items as well as industrial machinery and public property dysfunctional, aesthetically displeasing, and potentially dangerous. This is followed by a discussion, with case study examples, of three aspects of the impact of corrosion on society: (1) direct effects resulting in injury or death, (2) contamination of the environment, and (3) the financial costs.

Advances in Process Control.

ERIC Educational Resources Information Center

Morrison, David L.; And Others

1982-01-01

Advances in electronics and computer science have enabled industries (pulp/paper, iron/steel, petroleum/chemical) to attain better control of their processes with resulting increases in quality, productivity, profitability, and compliance with government regulations. (JN)

Terahertz Tools Advance Imaging for Security, Industry

NASA Technical Reports Server (NTRS)

2010-01-01

Picometrix, a wholly owned subsidiary of Advanced Photonix Inc. (API), of Ann Arbor, Michigan, invented the world s first commercial terahertz system. The company improved the portability and capabilities of their systems through Small Business Innovation Research (SBIR) agreements with Langley Research Center to provide terahertz imaging capabilities for inspecting the space shuttle external tanks and orbiters. Now API s systems make use of the unique imaging capacity of terahertz radiation on manufacturing floors, for thickness measurements of coatings, pharmaceutical tablet production, and even art conservation.

Introduction and Overview of the Industrial Interactive Panel Session

NASA Astrophysics Data System (ADS)

Seiler, David

2014-03-01

A unique industrial panel covering the challenges and needs of various industries and how being innovative is important. The session involves two invited industry speakers (24 minutes each) who will set the stage for the interactive round table panel session. The Panel, led by moderator Mark Bernius (Morgan Advanced Materials), consists of the two invited speakers plus an additional five industry panelists. The first thirty minutes of the panel session has the five additional panelists introducing themselves and their work/company. These introductions could include what they or their company does, sharing one or two technical highlights, listing some challenges or needs for physicists, and what innovation breakthroughs are needed in their industries. The final hour of the session will be highly interactive with questions to the panel coming from the moderator, the audience, and the panelists themselves. Questions that might be addressed include: how physicists are or could be critical in advancing innovation; how can AIP/APS/FIAP help industry get the physics help they need to be innovative (knowledge, the right staff, etc.); what role can students and post docs play in advancing industry's mission; etc. We invite you to participate in this interactive session and ask our industry experts your own interesting and challenging questions. The invited speakers are George Thompson, Intel, and Rick Watkins, Nike. The panel members also include Jason Cleveland, Asylum Research; Robert Doering, Texas Instruments; William Gallagher, IBM T.J. Watson Research Center; James Hollenhorst, Agilent Technologies; and Martin Poitzsch, Schlumberger-Doll Research.

An updated history of the Teratology Society.

PubMed

Shepard, Thomas H; Barr, Mason; Brent, Robert L; Hendrickx, Andrew; Kochhar, Devendra; Oakley, Godfrey; Scott, William J; Rogers, John M

2010-05-01

The 49-year history of the Teratology Society is reviewed. An abbreviated history is outlined in table form, with listings of the Warkany Lectures, the Continuing Education Courses, and officers of the society. The original article was updated to include the years 2000 to 2010. A year-by-year description of the events is given, including the scientific and social content of the annual meetings and changes in the business of the society, in many cases using comments from the past presidents. The valuable and unique diversity of the members is discussed and illustrated, presenting the disciplines and main research areas of the presidents. The number of submitted abstracts and the various categories are tabulated, averaging the number and type over successive periods. A significant increase in the number of abstracts dealing with epidemiology and developmental biology is evident. The society's development is compared to that of a human, and the question was asked by Shephard et al. (2000): Have we reached the maturational stage of old age or senescence, or is the society still maturing gracefully? This question needs further discussion by all the members. By 2010, many positive changes are happening to revitalize the society. During the past 50 years, we have developed the scientific basis to prevent birth defects caused by rubella, alcoholism, and folate deficiency, as well as other prenatal exposures. We are now taking advantage of advances in many fields to begin shaping the Teratology Society of the 21st century. We must now engage in political battles to obtain the resources needed to conduct further research and to implement prevention programs, as well as to provide care and rehabilitation for persons with birth defects. 2010 Wiley-Liss, Inc.

Advanced Education and Technology Business Plan, 2008-11

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2008

2008-01-01

The Ministry of Advanced Education and Technology's 2008-11 business plan identifies how it plans to work over the next three years to enhance advanced learning opportunities and innovation for all Albertans. Alberta's advanced learning system is composed of public board-governed institutions, the apprenticeship and industry training system,…

ISCB: past-present perspective for the International Society for Computational Biology.

PubMed

Rost, Burkhard

2014-01-01

Since its establishment in 1997, International Society for Computational Biology (ISCB) has contributed importantly toward advancing the understanding of living systems through computation. The ISCB represents nearly 3000 members working in >70 countries. It has doubled the number of members since 2007. At the same time, the number of meetings organized by the ISCB has increased from two in 2007 to eight in 2013, and the society has cemented many lasting alliances with regional societies and specialist groups. ISCB is ready to grow into a challenging and promising future. The progress over the past 7 years has resulted from the vision, and possibly more importantly, the passion and hard working dedication of many individuals.

ISCB: past-present perspective for the International Society for Computational Biology.

PubMed

Rost, Burkhard

2013-12-15

Since its establishment in 1997, International Society for Computational Biology (ISCB) has contributed importantly toward advancing the understanding of living systems through computation. The ISCB represents nearly 3000 members working in >70 countries. It has doubled the number of members since 2007. At the same time, the number of meetings organized by the ISCB has increased from two in 2007 to eight in 2013, and the society has cemented many lasting alliances with regional societies and specialist groups. ISCB is ready to grow into a challenging and promising future. The progress over the past 7 years has resulted from the vision, and possibly more importantly, the passion and hard working dedication of many individuals.

Exploratory Advanced Research Program

DOT National Transportation Integrated Search

2014-12-31

Exploratory advanced research focuses on longer-term, higher-risk research with a high payoff potential. It matches opportunities from discoveries in science and technology with the needs of specific industries. The uncertainties in the research appr...

Exploratory Advanced Research Program

DOT National Transportation Integrated Search

2016-12-15

Exploratory advanced research focuses on longer term, higher risk research with a high payoff potential. It matches opportunities from discoveries in science and technology with the needs of specific industries. The uncertainties in the research appr...

Dynamic Modeling of Learning in Emerging Energy Industries: The Example of Advanced Biofuels in the United States; NREL (National Renewable Energy Laboratory)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, Steve; Bush, Brian; Vimmerstedt, Laura

This paper (and its supplemental model) presents novel approaches to modeling interactions and related policies among investment, production, and learning in an emerging competitive industry. New biomass-to-biofuels pathways are being developed and commercialized to support goals for U.S. advanced biofuel use, such as those in the Energy Independence and Security Act of 2007. We explore the impact of learning rates and techno-economics in a learning model excerpted from the Biomass Scenario Model (BSM), developed by the U.S. Department of Energy and the National Renewable Energy Laboratory to explore the impact of biofuel policy on the evolution of the biofuels industry.more » The BSM integrates investment, production, and learning among competing biofuel conversion options that are at different stages of industrial development. We explain the novel methods used to simulate the impact of differing assumptions about mature industry techno-economics and about learning rates while accounting for the different maturity levels of various conversion pathways. A sensitivity study shows that the parameters studied (fixed capital investment, process yield, progress ratios, and pre-commercial investment) exhibit highly interactive effects, and the system, as modeled, tends toward market dominance of a single pathway due to competition and learning dynamics.« less

Distributed morality in an information society.

PubMed

Floridi, Luciano

2013-09-01

The phenomenon of distributed knowledge is well-known in epistemic logic. In this paper, a similar phenomenon in ethics, somewhat neglected so far, is investigated, namely distributed morality. The article explains the nature of distributed morality, as a feature of moral agency, and explores the implications of its occurrence in advanced information societies. In the course of the analysis, the concept of infraethics is introduced, in order to refer to the ensemble of moral enablers, which, although morally neutral per se, can significantly facilitate or hinder both positive and negative moral behaviours.

Society Needs to Organize the Structures and Uses of Science

ERIC Educational Resources Information Center

Tinbergen, Jan

1972-01-01

Points out that scientific advancements have contributed many gains, but also problems to the present society. Happiness can result in the future if the priority of human survival is kept above others in allocating resources for research. Joint decisions should be made by all nations on vital issues facing them. (PS)

Neurotechnology and society (2010-2060).

PubMed

Lynch, Zack

2004-05-01

To illuminate the societal implications of NBIC (nano-bio-info-cogno) technologies it is critical to place them within a broad historical context. By viewing recent human history as a series of techno-economic waves with accompanying socio-political responses, a framework emerges that can be used to understand how business, politics, and human culture will be affected by NBIC technologies. One important development that the NBIC convergence is making possible is neurotechnology, the set of tools that can influence the human central nervous system, especially the brain. The diffusion of neurotechnology will give rise to a new type of human society-a post-industrial, post-informational neurosociety.

Advanced Training Technologies and Learning Environments

NASA Technical Reports Server (NTRS)

Noor, Ahmed K. (Compiler); Malone, John B. (Compiler)

1999-01-01

This document contains the proceedings of the Workshop on Advanced Training Technologies and Learning Environments held at NASA Langley Research Center, Hampton, Virginia, March 9-10, 1999. The workshop was jointly sponsored by the University of Virginia's Center for Advanced Computational Technology and NASA. Workshop attendees were from NASA, other government agencies, industry, and universities. The objective of the workshop was to assess the status and effectiveness of different advanced training technologies and learning environments.

Today's Business Simulation Industry

ERIC Educational Resources Information Center

Summers, Gary J.

2004-01-01

New technologies are transforming the business simulation industry. The technologies come from research in computational fields of science, and they endow simulations with new capabilities and qualities. These capabilities and qualities include computerized behavioral simulations, online feedback and coaching, advanced interfaces, learning on…

The advancement of probiotics research and its application in fish farming industries.

PubMed

Banerjee, Goutam; Ray, Arun Kumar

2017-12-01

Fish are always susceptible to a variety of lethal diseases caused by different types of bacterial, fungal, viral and parasitic agents. The unscientific management practises such as, over feeding, high stock densities and destructive fishing techniques increase the probability of disease symptoms in aquaculture industries. According to Food and Agriculture Association (FAO), each and every year several countries such as China, India, Norway, Indonesia, etc. face a huge loss in aquaculture production due to mainly bacterial and viral diseases. The use of antibiotics is a common practise in fish farming sectors to control the disease outbreak. However, the antibiotics are not long term friend because it creates selective pressure for emergence of drug resistant bacteria. Probiotics are live microorganisms that confer several beneficial effects to host (enhances immunity, helps in digestion, protects from pathogens, improves water quality, promotes growth and reproduction) and can be used as an alternative of antibiotics. In recent year, a wide range of bacteria have reported as potential probiotics candidates in fish farming sectors, however, Lactobacillus sp. and Bacillus sp. gain special attention due to their high antagonistic activities, extracellular enzyme production and availability. In this present review, we have summarized the recent advancement in aquaculture probiotics research and its impact on fish health, nutrition, immunity, reproduction and water quality. Copyright © 2017 Elsevier Ltd. All rights reserved.

North American Fuzzy Logic Processing Society (NAFIPS 1992), volume 1

NASA Technical Reports Server (NTRS)

Villarreal, James A. (Compiler)

1992-01-01

This document contains papers presented at the NAFIPS '92 North American Fuzzy Information Processing Society Conference. More than 75 papers were presented at this Conference, which was sponsored by NAFIPS in cooperation with NASA, the Instituto Tecnologico de Morelia, the Indian Society for Fuzzy Mathematics and Information Processing (ISFUMIP), the Instituto Tecnologico de Estudios Superiores de Monterrey (ITESM), the International Fuzzy Systems Association (IFSA), the Japan Society for Fuzzy Theory and Systems, and the Microelectronics and Computer Technology Corporation (MCC). The fuzzy set theory has led to a large number of diverse applications. Recently, interesting applications have been developed which involve the integration of fuzzy systems with adaptive processes such as neural networks and genetic algorithms. NAFIPS '92 was directed toward the advancement, commercialization, and engineering development of these technologies.

North American Fuzzy Logic Processing Society (NAFIPS 1992), volume 2

NASA Technical Reports Server (NTRS)

Villarreal, James A. (Compiler)

1992-01-01

This document contains papers presented at the NAFIPS '92 North American Fuzzy Information Processing Society Conference. More than 75 papers were presented at this Conference, which was sponsored by NAFIPS in cooperation with NASA, the Instituto Tecnologico de Morelia, the Indian Society for Fuzzy Mathematics and Information Processing (ISFUMIP), the Instituto Tecnologico de Estudios Superiores de Monterrey (ITESM), the International Fuzzy Systems Association (IFSA), the Japan Society for Fuzzy Theory and Systems, and the Microelectronics and Computer Technology Corporation (MCC). The fuzzy set theory has led to a large number of diverse applications. Recently, interesting applications have been developed which involve the integration of fuzzy systems with adaptive processes such a neural networks and genetic algorithms. NAFIPS '92 was directed toward the advancement, commercialization, and engineering development of these technologies.

A Testing Service for Industry

NASA Technical Reports Server (NTRS)

1994-01-01

A small isolated NASA facility provides assistance to industry in the design, testing, and operation of oxygen systems. White Sands Test Facility (WSTF) was originally established to test rocket propulsion systems for the Apollo program. The facility's role was later expanded into testing characterization, flammability and toxicity characteristics of materials. Its materials and components test methods were adopted by the American society for Testing and Materials. When research and testing results became known, industry requested assistance, and in 1980, NASA authorized WSTF to open its facility to private firms, a valuable service, as oxygen systems testing is often too expensive and too hazardous for many companies. Today, some of the best known American industries utilize White Sands testing capabilities.

Responses of Chinese Higher Education to the Information Society

ERIC Educational Resources Information Center

Cai, Yuzhuo; Guo, Wenge

2006-01-01

Compared to the advanced industrial countries, the use of information technology in Chinese higher education came relatively late. Nevertheless, recent Chinese practices have achieved significant progress in the country's efforts to bridge the digital divide. This article focuses special attention on the responses of Chinese higher education to…

Education, Society and Politics in Sweden. Monograph No. 2.

ERIC Educational Resources Information Center

Burns, R. J.

Interrelationships among the educational, social, and political systems of Sweden are examined, with particular emphasis on the recent trend toward internationalization. Sweden is described in general terms as a highly industrialized, technologically-advanced nation with a high standard of living, far-reaching welfare policies, and high levels of…

Chemical Industry: A New Interdisciplinary Course for Secondary Schools.

ERIC Educational Resources Information Center

Nae, Nehemia; And Others

1980-01-01

Describes an advanced high school course which incorporates an industrial approach into the chemistry curriculum. Presents three case studies as examples taken from the local chemistry industry--the production of copper, bromine, and plastics. (CS)

Advanced Materials in Support of EERE Needs to Advance Clean Energy Technologies Program Implementation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liby, Alan L; Rogers, Hiram

The goal of this activity was to carry out program implementation and technical projects in support of the ARRA-funded Advanced Materials in Support of EERE Needs to Advance Clean Energy Technologies Program of the DOE Advanced Manufacturing Office (AMO) (formerly the Industrial Technologies Program (ITP)). The work was organized into eight projects in four materials areas: strategic materials, structural materials, energy storage and production materials, and advanced/field/transient processing. Strategic materials included work on titanium, magnesium and carbon fiber. Structural materials included work on alumina forming austentic (AFA) and CF8C-Plus steels. The advanced batteries and production materials projects included work onmore » advanced batteries and photovoltaic devices. Advanced/field/transient processing included work on magnetic field processing. Details of the work in the eight projects are available in the project final reports which have been previously submitted.« less

2016 Guidelines of the Taiwan Heart Rhythm Society and the Taiwan Society of Cardiology for the management of atrial fibrillation.

PubMed

Chiang, Chern-En; Wu, Tsu-Juey; Ueng, Kwo-Chang; Chao, Tze-Fan; Chang, Kuan-Cheng; Wang, Chun-Chieh; Lin, Yenn-Jiang; Yin, Wei-Hsian; Kuo, Jen-Yuan; Lin, Wei-Shiang; Tsai, Chia-Ti; Liu, Yen-Bin; Lee, Kun-Tai; Lin, Li-Jen; Lin, Lian-Yu; Wang, Kang-Ling; Chen, Yi-Jen; Chen, Mien-Cheng; Cheng, Chen-Chuan; Wen, Ming-Shien; Chen, Wen-Jone; Chen, Jyh-Hong; Lai, Wen-Ter; Chiou, Chuen-Wang; Lin, Jiunn-Lee; Yeh, San-Jou; Chen, Shih-Ann

2016-11-01

Atrial fibrillation (AF) is the most common sustained arrhythmia. Both the incidence and prevalence of AF are increasing, and the burden of AF is becoming huge. Many innovative advances have emerged in the past decade for the diagnosis and management of AF, including a new scoring system for the prediction of stroke and bleeding events, the introduction of non-vitamin K antagonist oral anticoagulants and their special benefits in Asians, new rhythm- and rate-control concepts, optimal endpoints of rate control, upstream therapy, life-style modification to prevent AF recurrence, and new ablation techniques. The Taiwan Heart Rhythm Society and the Taiwan Society of Cardiology aimed to update the information and have appointed a jointed writing committee for new AF guidelines. The writing committee members comprehensively reviewed and summarized the literature, and completed the 2016 Guidelines of the Taiwan Heart Rhythm Society and the Taiwan Society of Cardiology for the Management of Atrial Fibrillation. This guideline presents the details of the updated recommendations, along with their background and rationale, focusing on data unique for Asians. The guidelines are not mandatory, and members of the writing committee fully realize that treatment of AF should be individualized. The physician's decision remains most important in AF management. Copyright © 2016. Published by Elsevier B.V.

Industry/University Consortium for ATS research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allen, R.P.; Golan, L.P.

1993-11-01

The Industry/University ATS research program is the result of two planning workshops. Workshop I was held April 8--10, 1991 and had the goal of identifying research needs for advanced gas turbine cycles that would permit rapid commercialization of cycles with significant improvements over the machines currently under development, in terms of the cost of electricity produced and the environmental burdens resulting from their use in power producing. Workshop II was held in January 1992 and continued the identification of the research needs to develop advanced gas turbine systems. The goals established for the ATS systems were: (1) efficiency exceeding 60%more » for large utility turbine system and 15% improvement in heat rate for industrial systems; (2) busbar energy costs 10% less than current state of the art and (3) fuel flexible designs. In addition Workshop II participants agreed that an industry driven research consortium was an acceptable mechanism to achieve base technology development needs.« less

Space Technology Industry Forum

NASA Image and Video Library

2010-07-12

Program Executive for the NASA Innovative Advanced Concepts (NIAC) Program Jay Falker speaks during the NASA New Space Technology Industry Forum being held at the University of Maryland in College Park on Tuesday, July 13, 2010. During the two-day event, speakers are focusing on the president's fiscal year 2011 budget request for NASA's new Space Technology Program. Representatives from industry, academia and the federal government are in attendance to discuss strategy, development and implementation of NASA's proposed new technology-enabled exploration. Photo Credit: (NASA/Bill Ingalls)

Gynaecologists and industry: ain't no sunshine.

PubMed

Farquhar, Cynthia M; Vercellini, Paolo; Marjoribanks, Jane

2017-08-01

The field of reproductive medicine is known for its innovations, and where there is innovation there is marketing and engagement with the doctors who are potential prescribers and users of those innovations. Financial connections between drug and device manufacturers with doctors have been extensively debated over the past decade. On one hand, relationships between doctors and industry could be considered synergistic by allowing the development of improved treatments. On the other hand, payment (and other benefits) from industry to doctors may subtly shift the main objective of the collaboration from patients' health to mutual benefits for both doctors and industry. Fertility patients can be considered 'vulnerable' as they face the multiple challenges of seeking to be parents, understanding complex and expensive fertility treatments that are by no means universally successful, and at the same time are under pressure because of their ever-increasing age. They are entitled to receive the most cost-effective treatments. We suggest that specialists in the field of reproductive medicine should be transparent about the receipt of financial benefits, including funding from industry, as it may be influencing both research outcomes and treatments that patients are offered. We also recommend that payments arising from industry-sponsored research should be centralized in institutional funds and not paid directly to researchers. And there should be transparency about the source and the purpose of the payment. Industry sponsorship of medical societies and their educational events should be kept to a minimum and declared quantitatively in societies' websites and scientific programme brochures. Industry sponsorship of scientific meetings should not include the right to host educational symposia or speakers within the programme. All speakers should declare their conflicts of interest (COIs) at their meetings. Guideline groups should require all members to declare their financial

Two Decades of Laccases: Advancing Sustainability in the Chemical Industry

DOE PAGES

Cannatelli, Mark D.; Ragauskas, Arthur J.

2016-08-05

Given the current state of environmental affairs and that our future on this planet as we know it is in jeopardy, research and development into greener and more sustainable technologies within the chemical and forest products industries is at its peak. The need for environmentally benign practices is propelling new green processes, given the global scale of these industries. These challenges are also impacting academic research and our reagents of interest are laccases. Furthermore, these enzymes are employed in a variety of biotechnological applications due to their native function as catalytic oxidants. They are about as green as it getsmore » when it comes to chemical processes, requiring O 2 as their only co-substrate and producing H 2O as the sole by-product. The following account will review our twenty year journey on the use of these enzymes within our research group, from their initial use in biobleaching of kraft pulps and for fiber modification within the pulp and paper industry, to their current application as green catalytic oxidants in the field of synthetic organic chemistry.« less

The America Society of Sugar Beet Technologist, advancing sugarbeet research for 75 years

USDA-ARS?s Scientific Manuscript database

The American Society of Sugar Beet Technologists (ASSBT) was created 75 years ago when a group of researchers that had been meeting informally as the Sugarbeet Roundtable adopted the constitution and by-laws that provided the basis for an organization that continues to foster the exchange of ideas a...

The American Society of Sugar Beet Technologists advancing sugarbeet research for 75 years

USDA-ARS?s Scientific Manuscript database

The American Society of Sugar Beet Technologists (ASSBT) was created 75 years ago when a group of researchers that had been meeting informally as the Sugarbeet Roundtable adopted the constitution and by-laws that provided the basis for an organization that continues to foster the exchange of ideas a...

Recommendations on disease management for patients with advanced human epidermal growth factor receptor 2-positive breast cancer and brain metastases: American Society of Clinical Oncology clinical practice guideline.

PubMed

Ramakrishna, Naren; Temin, Sarah; Chandarlapaty, Sarat; Crews, Jennie R; Davidson, Nancy E; Esteva, Francisco J; Giordano, Sharon H; Gonzalez-Angulo, Ana M; Kirshner, Jeffrey J; Krop, Ian; Levinson, Jennifer; Modi, Shanu; Patt, Debra A; Perez, Edith A; Perlmutter, Jane; Winer, Eric P; Lin, Nancy U

2014-07-01

To provide formal expert consensus-based recommendations to practicing oncologists and others on the management of brain metastases for patients with human epidermal growth factor receptor 2 (HER2) -positive advanced breast cancer. The American Society of Clinical Oncology (ASCO) convened a panel of medical oncology, radiation oncology, guideline implementation, and advocacy experts and conducted a systematic review of the literature. When that failed to yield sufficiently strong quality evidence, the Expert Panel undertook a formal expert consensus-based process to produce these recommendations. ASCO used a modified Delphi process. The panel members drafted recommendations, and a group of other experts joined them for two rounds of formal ratings of the recommendations. No studies or existing guidelines met the systematic review criteria; therefore, ASCO conducted a formal expert consensus-based process. Patients with brain metastases should receive appropriate local therapy and systemic therapy, if indicated. Local therapies include surgery, whole-brain radiotherapy, and stereotactic radiosurgery. Treatments depend on factors such as patient prognosis, presence of symptoms, resectability, number and size of metastases, prior therapy, and whether metastases are diffuse. Other options include systemic therapy, best supportive care, enrollment onto a clinical trial, and/or palliative care. Clinicians should not perform routine magnetic resonance imaging (MRI) to screen for brain metastases, but rather should have a low threshold for MRI of the brain because of the high incidence of brain metastases among patients with HER2-positive advanced breast cancer. © 2014 by American Society of Clinical Oncology.

The industrial applications of cassava: current status, opportunities and prospects.

PubMed

Li, Shubo; Cui, Yanyan; Zhou, Yuan; Luo, Zhiting; Liu, Jidong; Zhao, Mouming

2017-06-01

Cassava (Manihot esculenta Crantz) is a drought-tolerant, staple food crop that is grown in tropical and subtropical areas. As an important raw material, cassava is a valuable food source in developing countries and is also extensively employed for producing starch, bioethanol and other bio-based products (e.g. feed, medicine, cosmetics and biopolymers). These cassava-based industries also generate large quantities of wastes/residues rich in organic matter and suspended solids, providing great potential for conversion into value-added products through biorefinery. However, the community of cassava researchers is relatively small and there is very limited information on cassava. Therefore this review summarizes current knowledge on the system biology, economic value, nutritional quality and industrial applications of cassava and its wastes in an attempt to accelerate understanding of the basic biology of cassava. The review also discusses future perspectives with respect to integrating and utilizing cassava information resources for increasing the economic and environmental sustainability of cassava industries. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Counterpoint: physician-industry relationships can be ethically established, and conflicts of interest can be ethically managed.

PubMed

White, Andrew P; Vaccaro, Alexander R; Zdeblick, Thomas

2007-05-15

Review of the nature of conflicts of interest in physician-industry relationships, with a focus on the efforts to ethically manage physician-industry relationships. To illustrate the perspective that physician-industry relationships can be ethically established, and conflicts of interest can be ethically managed. The interest in considering the appropriateness of physician-industry relationships has recently become focused on spine surgery. Many of the conflicts of interest inherent to these relationships have been interpreted as problematic, and have been scrutinized by the media, industry, medical and legal professions, and Federal government. The basis for conflicts of interest, manner in which bias may be introduced, and methods to reduce bias are presented. The potential risks and benefits to patients that are inherent to physician-industry relationships are considered. A framework, developed by medical ethicists, is provided to guide analysis of conflicts of interest in physician-industry relationships. Collaboration between spine surgeons and industry is necessary to improve patient care. The conflicts of interest that often arise in physician-industry relationships must be recognized, and keenly managed in order to eliminate the risk and maximize the benefit to the patient. Ethical management of conflicts must include disclosure. To preserve patient autonomy, management should also include a discussion of the quality of the medical evidence on which treatment recommendations are made. Guidelines from industry and medical professional organizations, including the "Standards of Professionalism" currently under development by the American Academy of Orthopedic Surgery, are also expected to aid in the ethical establishment and management of conflicts of interest. Careful consideration of conflicts of interest in physician-industry relationships has provided an opportunity to review our goals as physicians in society, and to continue collaborative advancement of

[Development and perspective of bio-based chemical fiber industry].

PubMed

Li, Zengjun

2016-06-25

Bio-based fiber is environment friendly, reproducible, easily biodegradable. Therefore, rapid development of bio-based fiber industry is an obvious in progress to replace petrochemical resources, develop sustainable economy, build resource saving and environment friendly society. This article describes the current development of bio-based fiber industry, analyzes existing problems, indicates the trends and objectives of bio-based fiber materials technology innovation and recommends developing bio-based fibers industry of our country.

Industrial Arts and Technology, Past, Present, and Future; Addresses and Proceedings of the American Industrial Arts Association's Annual Convention (29th, Philadelphia, 1967).

ERIC Educational Resources Information Center

American Industrial Arts Association, Washington, DC.

Manuscripts of 158 individual conference presentations are included. Speeches in each general session were centered on one of the following major topics--(1) Philosophical Bases of Industrial Arts--Four Poles, (2) Industrial Arts and the National Image, (3) The Cultural and Educational Heritage of Our Technological Society, (4) How and Where Can…

Evaluation of advanced R and D topics in photovoltaics

NASA Technical Reports Server (NTRS)

Surek, T.

1982-01-01

An evaluation of advanced research and development topics in photovoltaic that is summarized. The intent was to develop priorities in a list of advanced research and development activities. Thirty-five activities in 10 major categories were evaluated by their contributions to basic scientific advances, potential impact on further technology development by private industry, and priorities for federal advanced research and development funding.

Elementary School Industrial Arts Interaction Technology for Children. A Positive Approach to Education for a Changing Society.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge.

Prepared by the vocational education division of a state department of education and compiled by industrial arts educators, this resource guide provides a conceptual basis for the elementary teacher using industrial arts as a means of introducing children to industrial processes and orienting them to the physical and material world. Included in…

How the new optoelectronic design automation industry is taking advantage of preexisting EDA standards

NASA Astrophysics Data System (ADS)

Nesmith, Kevin A.; Carver, Susan

2014-05-01

With the advancements in design processes down to the sub 7nm levels, the Electronic Design Automation industry appears to be coming to an end of advancements, as the size of the silicon atom becomes the limiting factor. Or is it? The commercial viability of mass-producing silicon photonics is bringing about the Optoelectronic Design Automation (OEDA) industry. With the science of photonics in its infancy, adding these circuits to ever-increasing complex electronic designs, will allow for new generations of advancements. Learning from the past 50 years of the EDA industry's mistakes and missed opportunities, the photonics industry is starting with electronic standards and extending them to become photonically aware. Adapting the use of pre-existing standards into this relatively new industry will allow for easier integration into the present infrastructure and faster time to market.

Alcohol industry sponsorship and alcohol-related harms in Australian university sportspeople/athletes.

PubMed

O'Brien, Kerry S; Lynott, Dermot; Miller, Peter G

2013-05-01

Although there is evidence that alcohol sponsorship in sport is related to greater drinking, there is no empirical research on whether alcohol sponsorship is associated with alcohol-related harms. We examined whether there is an association between receipt of alcohol industry sponsorship, and attendance at alcohol sponsor's drinking establishments (e.g. bars), and alcohol-related aggression and antisocial behaviour in university students who play sport. University sportspeople (n = 652) completed surveys (response rate >80%) assessing receipt of alcohol industry sponsorship, attendance at sponsor's establishments and confounders [i.e. age, gender, sport type, location and alcohol consumption measured by Alcohol Use Disorders Identification Test--alcohol consumption (AUDIT-C) scores]. Participants also completed measures assessing displays and receipt of aggressive and antisocial behaviours (e.g. assaults, unwanted sexual advance, vandalism). Logistic regression models including confounders and reported attendance at alcohol sponsor's establishments showed that sportspeople receiving alcohol industry sponsorship were more likely to have been the victim of aggression (adjusted odds ratio 2.62, 95% confidence interval 1.22-5.64). Attending an alcohol sponsor's establishment was not associated with higher rates of other aggressive or antisocial behaviour. However, significant associations where found between AUDIT-C scores and having displayed and received aggression, and having damaged or had property damaged. Male sportspeople were more likely to have displayed and received aggressive and antisocial behaviour. Higher AUDIT-C scores, gender and receipt of alcohol industry sponsorship were associated with alcohol-related aggression/antisocial behaviours in university sportspeople. Sport administrators should consider action to reduce the harms associated with excessive alcohol consumption and alcohol industry sponsorship in sport. © 2012 Australasian Professional

First Brazilian Consensus of Advanced Prostate Cancer: Recommendations for Clinical Practice.

PubMed

Sasse, Andre Deeke; Wiermann, Evanius Garcia; Herchenhorn, Daniel; Bastos, Diogo Assed; Schutz, Fabio A; Maluf, Fernando Cotait; Coura, George; Morbeck, Igor Alexandre Protzner; Cerci, Juliano J; Smaletz, Oren; Lima, Volney Soares; Adamy, Ari; Campos, Franz Santos de; Carvalhal, Gustavo Franco; Cezar, Leandro Casemiro; Dall'Oglio, Marcos Francisco; Sadi, Marcus Vinicius; Reis, Rodolfo Borges Dos; Nogueira, Lucas

2017-01-01

Prostate cancer still represents a major cause of morbidity, and still about 20% of men with the disease are diagnosed or will progress to the advanced stage without the possibility of curative treatment. Despite the recent advances in scientific and technological knowledge and the availability of new therapies, there is still considerable heterogeneity in the therapeutic approaches for metastatic prostate cancer. This article presents a summary of the I Brazilian Consensus on Advanced Prostate Cancer, conducted by the Brazilian Society of Urology and Brazilian Society of Clinical Oncology. Experts were selected by the medical societies involved. Forty issues regarding controversial issues in advanced disease were previously elaborated. The panel met for consensus, with a threshold established for 2/3 of the participants. The treatment of advanced prostate cancer is complex, due to the existence of a large number of therapies, with different response profiles and toxicities. The panel addressed recommendations on preferred choice of therapies, indicators that would justify their change, and indicated some strategies for better sequencing of treatment in order to maximize the potential for disease control with the available therapeutic arsenal. The lack of consensus on some topics clearly indicates the absence of strong evidence for some decisions. Copyright® by the International Brazilian Journal of Urology.

[Progress in industrial bioprocess engineering in China].

PubMed

Zhuang, Yingping; Chen, Hongzhang; Xia, Jianye; Tang, Wenjun; Zhao, Zhimin

2015-06-01

The advances of industrial biotechnology highly depend on the development of industrial bioprocess researches. In China, we are facing several challenges because of a huge national industrial fermentation capacity. The industrial bioprocess development experienced several main stages. This work mainly reviews the development of the industrial bioprocess in China during the past 30 or 40 years: including the early stage kinetics model study derived from classical chemical engineering, researching method based on control theory, multiple-parameter analysis techniques of on-line measuring instruments and techniques, and multi-scale analysis theory, and also solid state fermentation techniques and fermenters. In addition, the cutting edge of bioprocess engineering was also addressed.

I3Mote: An Open Development Platform for the Intelligent Industrial Internet

PubMed Central

Martinez, Borja; Vilajosana, Xavier; Kim, Il Han; Zhou, Jianwei; Tuset-Peiró, Pere; Xhafa, Ariton; Poissonnier, Dominique; Lu, Xiaolin

2017-01-01

In this article we present the Intelligent Industrial Internet (I3) Mote, an open hardware platform targeting industrial connectivity and sensing deployments. The I3Mote features the most advanced low-power components to tackle sensing, on-board computing and wireless/wired connectivity for demanding industrial applications. The platform has been designed to fill the gap in the industrial prototyping and early deployment market with a compact form factor, low-cost and robust industrial design. I3Mote is an advanced and compact prototyping system integrating the required components to be deployed as a product, leveraging the need for adopting industries to build their own tailored solution. This article describes the platform design, firmware and software ecosystem and characterizes its performance in terms of energy consumption. PMID:28452945

Academic research and industry relationships.

PubMed

Ross, R S

1986-11-01

Economic forces are such that industry-university relationships will occur. It is impossible to pull up the draw-bridge and refuse to deal with industry. The challenge is to structure arrangements which facilitate the transfer of new knowledge to industry, for the ultimate benefit of society, without doing violence to the traditional values of the university. Good arrangements are made when both parties bring something to the deal. There must also be compromise. Each party must be willing to concede some points. It has been said that good deals are those with which neither party is completely happy. Satisfaction and dissatisfaction must be equally distributed. Finally, as in all things, success depends on trust and understanding between good people on both sides.

Sexual networks in contemporary Western societies

NASA Astrophysics Data System (ADS)

Liljeros, Fredrik

2004-07-01

Sexually transmitted infections continue to be a severe health problem in contemporary Western societies, despite the considerable funds allocated for control programs. In this article, we present and discuss a variety of explanations that have been advanced on why this type of disease is so hard to eradicate, despite the fact that the contact by which it is spread is far less frequent than is the case with most other infectious diseases. We conclude that several processes and mechanisms facilitate the spread of sexually infected diseases, and that both broad and targeted intervention is therefore needed to eradicate such diseases.

American Radium Society 92nd Annual Meeting.

PubMed

Jani, Ashesh B; Le, Quynh-Thu; Michalski, Jeff J; Sawaya, Raymond; Wilson, Lynn D

2010-08-01

We provide a summary of the 92nd Annual Meeting of the American Radium Society (ARS), the oldest organization devoted to the study of cancer. This May 2010 meeting included a postgraduate course/contouring laboratory, seven scientific sessions, two keynote lectures, one Janeway lecture, four Panel presentations, one debate, one satellite symposium and 107 poster presentations--details of each of these activities are provided. All of these academic activities revolved around the major meeting theme of 'Improved Outcomes Through Judicious Applications of Advanced Technology'.

Polish Society of Endocrinology Position statement on endocrine disrupting chemicals (EDCs).

PubMed

Rutkowska, Aleksandra; Rachoń, Dominik; Milewicz, Andrzej; Ruchała, Marek; Bolanowski, Marek; Jędrzejuk, Diana; Bednarczuk, Tomasz; Górska, Maria; Hubalewska-Dydejczyk, Alicja; Kos-Kudła, Beata; Lewiński, Andrzej; Zgliczyński, Wojciech

2015-01-01

With the reference to the position statements of the Endocrine Society, the Paediatric Endocrine Society, and the European Society of Paediatric Endocrinology, the Polish Society of Endocrinology points out the adverse health effects caused by endocrine disrupting chemicals (EDCs) commonly used in daily life as components of plastics, food containers, pharmaceuticals, and cosmetics. The statement is based on the alarming data about the increase of the prevalence of many endocrine disorders such as: cryptorchidism, precocious puberty in girls and boys, and hormone-dependent cancers (endometrium, breast, prostate). In our opinion, it is of human benefit to conduct epidemiological studies that will enable the estimation of the risk factors of exposure to EDCs and the probability of endocrine disorders. Increasing consumerism and the industrial boom has led to severe pollution of the environment with a corresponding negative impact on human health; thus, there is great necessity for the biomonitoring of EDCs in Poland.

Advanced Therapy Medicinal Products: How to Bring Cell-Based Medicinal Products Successfully to the Market - Report from the CAT-DGTI-GSCN Workshop at the DGTI Annual Meeting 2014.

PubMed

Celis, Patrick; Ferry, Nicolas; Hystad, Marit; Schüßler-Lenz, Martina; Doevendans, Pieter A; Flory, Egbert; Beuneu, Claire; Reischl, Ilona; Salmikangas, Paula

2015-05-01

On September 11, 2014, a workshop entitled 'Advanced Therapy Medicinal Products: How to Bring Cell-Based Medicinal Product Successfully to the Market' was held at the 47th annual meeting of the German Society for Transfusion Medicine and Immunohematology (DGTI), co-organised by the European Medicines Agency (EMA) and the DGTI in collaboration with the German Stem Cell Network (GSCN). The workshop brought together over 160 participants from academia, hospitals, small- or medium-sized enterprise developers and regulators. At the workshop, speakers from EMA, the Committee for Advanced Therapies (CAT), industry and academia addressed the regulatory aspects of development and authorisation of advanced therapy medicinal products (ATMPs), classification of ATMPs and considerations on cell-based therapies for cardiac repair. The open forum discussion session allowed for a direct interaction between ATMP developers and the speakers from EMA and CAT.

49 CFR 95.9 - Meetings; other than industry advisory committees.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 1 2011-10-01 2011-10-01 false Meetings; other than industry advisory committees... Meetings; other than industry advisory committees. (a) Meetings of an advisory committee, other than an industry advisory committee, may be held only at the call, or with the advance approval, of a full-time...

49 CFR 95.9 - Meetings; other than industry advisory committees.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Meetings; other than industry advisory committees... Meetings; other than industry advisory committees. (a) Meetings of an advisory committee, other than an industry advisory committee, may be held only at the call, or with the advance approval, of a full-time...

49 CFR 95.9 - Meetings; other than industry advisory committees.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 1 2012-10-01 2012-10-01 false Meetings; other than industry advisory committees... Meetings; other than industry advisory committees. (a) Meetings of an advisory committee, other than an industry advisory committee, may be held only at the call, or with the advance approval, of a full-time...

Syndromes of collateral-reported psychopathology for ages 18-59 in 18 Societies

PubMed Central

Ivanova, Masha Y.; Achenbach, Thomas M.; Rescorla, Leslie A.; Turner, Lori V.; Árnadóttir, Hervör Alma; Au, Alma; Caldas, J. Carlos; Chaalal, Nebia; Chen, Yi Chuen; da Rocha, Marina M.; Decoster, Jeroen; Fontaine, Johnny R.J.; Funabiki, Yasuko; Guðmundsson, Halldór S.; Kim, Young Ah; Leung, Patrick; Liu, Jianghong; Malykh, Sergey; Marković, Jasminka; Oh, Kyung Ja; Petot, Jean-Michel; Samaniego, Virginia C.; Silvares, Edwiges Ferreira de Mattos; Šimulionienė, Roma; Šobot, Valentina; Sokoli, Elvisa; Sun, Guiju; Talcott, Joel B.; Vázquez, Natalia; Zasępa, Ewa

2017-01-01

The purpose was to advance research and clinical methodology for assessing psychopathology by testing the international generalizability of an 8-syndrome model derived from collateral ratings of adult behavioral, emotional, social, and thought problems. Collateral informants rated 8,582 18–59-year-old residents of 18 societies on the Adult Behavior Checklist (ABCL). Confirmatory factor analyses tested the fit of the 8-syndrome model to ratings from each society. The primary model fit index (Root Mean Square Error of Approximation) showed good model fit for all societies, while secondary indices (Tucker Lewis Index, Comparative Fit Index) showed acceptable to good fit for 17 societies. Factor loadings were robust across societies and items. Of the 5,007 estimated parameters, 4 (0.08%) were outside the admissible parameter space, but 95% confidence intervals included the admissible space, indicating that the 4 deviant parameters could be due to sampling fluctuations. The findings are consistent with previous evidence for the generalizability of the 8-syndrome model in self-ratings from 29 societies, and support the 8-syndrome model for operationalizing phenotypes of adult psychopathology from multi-informant ratings in diverse societies. PMID:29399019

Status of the lead/acid battery industry in Malaysia

NASA Astrophysics Data System (ADS)

Wong, J.

The Malaysian automotive battery industry has an over-capacity and is experiencing a highly competitive situation in the domestic market. In the medium term, therefore, the industry will concentrate on making advances in battery design and technology, and on improving productivity. The manufacture of industrial batteries is similarly under pressure, particularly from foreign products. At present, it is not feasible to produce locally all the various types of industrial batteries required by the home market.

Biology and Industrial Applications of Chlorella: Advances and Prospects.

PubMed

Liu, Jin; Chen, Feng

2016-01-01

Chlorella represents a group of eukaryotic green microalgae that has been receiving increasing scientific and commercial interest. It possesses high photosynthetic ability and is capable of growing robustly under mixotrophic and heterotrophic conditions as well. Chlorella has long been considered as a source of protein and is now industrially produced for human food and animal feed. Chlorella is also rich in oil, an ideal feedstock for biofuels. The exploration of biofuel production by Chlorella is underway. Chlorella has the ability to fix carbon dioxide efficiently and to remove nutrients of nitrogen and phosphorous, making it a good candidate for greenhouse gas biomitigation and wastewater bioremediation. In addition, Chlorella shows potential as an alternative expression host for recombinant protein production, though challenges remain to be addressed. Currently, omics analyses of certain Chlorella strains are being performed, which will help to unravel the biological implications of Chlorella and facilitate the future exploration of industrial applications.

Application of advanced oxidation processes for cleaning of industrial water generated in wet dedusting of shaft furnace gases.

PubMed

Czaplicka, Marianna; Kurowski, Ryszard; Jaworek, Katarzyna; Bratek, Łukasz

2013-01-01

The paper presents results of studies into advanced oxidation processes in 03 and 03/UV systems. An advanced oxidation process (AOP) was conducted to reduce the load of impurities in circulating waters from wet de-dusting of shaft furnace gases. Besides inorganic impurities, i.e. mainly arsenic compounds (16 g As L(-1) on average), lead, zinc, chlorides and sulphates, the waters also contain some organic material. The organic material is composed of a complex mixture that contains, amongst others, aliphatic compounds, phenol and its derivatives, pyridine bases, including pyridine, and its derivatives. The test results show degradation of organic and inorganic compounds during ozonation and photo-oxidation processes. Analysis of the solutions from the processes demonstrated that the complex organic material in the industrial water was oxidized in ozonation and in photo-oxidation, which resulted in formation of aldehydes and carboxylic acids. Kinetic degradation of selected pollutants is presented. Obtained results indicated that the O3/UV process is more effective in degradation of organic matter than ozonation. Depending on the process type, precipitation of the solid phase was observed. The efficiency of solid-phase formation was higher in photo-oxidation with ozone. It was found that the precipitated solid phase is composed mainly of arsenic, iron and oxygen.

PACS industry in Korea

NASA Astrophysics Data System (ADS)

Kim, Hee-Joung

2002-05-01

PACS industry in Korea has been rapidly growing, since government had supported collaborative PACS project between industry and university hospital. In the beginning, PACS industry had focused on developing peripheral PACS solutions, while the Korea PACS society was being formed. A few companies had started developing and installing domestic large-scale full-PACS system for teaching hospitals. Several years later, many hospitals have installed full-PACS system with national policy of reimbursement for PACS exams in November 1999. Both experiences of full-PACS installation and national policy generated tremendous intellectual and technological expertise about PACS at all levels, clinical, hospital management, education, and industrial sectors. There are now more than 20 domestic PACS companies. They have enough experiences which are capable of installing a truly full-PACS system for large-scale teaching hospitals. As an example, a domestic company had installed more than 40 full-PACS systems within 2-3 years. Enough experiences of full-PACS installation in Korea lead PACS industry to start exporting their full-PACS solutions. However, further understanding and timely implementation of continuously evolving international standard and integrated healthcare enterprise concepts may be necessary for international leading of PACS technologies for the future.

Multilevel selection and social evolution of insect societies

NASA Astrophysics Data System (ADS)

Korb, Judith; Heinze, Jürgen

How sterile, altruistic worker castes have evolved in social insects and how they are maintained have long been central topics in evolutionary biology. With the advance of kin selection theory, insect societies, in particular those of haplodiploid bees, ants, and wasps, have become highly suitable model systems for investigating the details of social evolution and recently also how within-group conflicts are resolved. Because insect societies typically do not consist of clones, conflicts among nestmates arise, for example about the partitioning of reproduction and the allocation of resources towards male and female sexuals. Variation in relatedness among group members therefore appears to have a profound influence on the social structure of groups. However, insect societies appear to be remarkably robust against such variation: division of labor and task allocation are often organized in more or less the same way in societies with high as in those with very low nestmate relatedness. To explain the discrepancy between predictions from kin structure and empirical data, it was suggested that constraints-such as the lack of power or information-prevent individuals from pursuing their own selfish interests. Applying a multilevel selection approach shows that these constraints are in fact group-level adaptation preventing or resolving intracolonial conflict. The mechanisms of conflict resolution in insect societies are similar to those at other levels in the biological hierarchy (e.g., in the genome or multicellular organisms): alignment of interests, fair lottery, and social control. Insect societies can thus be regarded as a level of selection with novelties that provide benefits beyond the scope of a solitary life. Therefore, relatedness is less important for the maintenance of insect societies, although it played a fundamental role in their evolution.

A Radiologist's Guide to the Industry: A Methodical Approach to Physician-Industry Relationships in Radiology.

PubMed

Perry, Donald Dj; Khorsand, Derek; McNeeley, Michael

In the last century, rapidly advancing technological innovations have become essential components of modern healthcare, increasing the frequency and necessity of interactions between physicians and industry. These interactions have the potential to bias objectivity and should be approached carefully. A recent JACR article by Harvey et al, highlighted 2014 CMS data, which reported that only 4% of radiologists had interactions with industry, coming in second lowest amongst all 19 reported specialties. However, when managed appropriately, physician-industry relationships can mutually benefit patients, research, payers, providers, hospitals and the medical industry. In order to maintain relevance in the evolving healthcare landscape, it is imperative that radiologists establish, maintain, and expand relationships with industry. To help providers work within the ethical safety of institutional guidelines, while still promoting innovation, we propose a methodical approach with 7 key components to consider when developing appropriate physician-industry relationships or evaluating new products. Copyright © 2017 Elsevier Inc. All rights reserved.

An introduction to NASA's advanced computing program: Integrated computing systems in advanced multichip modules

NASA Technical Reports Server (NTRS)

Fang, Wai-Chi; Alkalai, Leon

1996-01-01

Recent changes within NASA's space exploration program favor the design, implementation, and operation of low cost, lightweight, small and micro spacecraft with multiple launches per year. In order to meet the future needs of these missions with regard to the use of spacecraft microelectronics, NASA's advanced flight computing (AFC) program is currently considering industrial cooperation and advanced packaging architectures. In relation to this, the AFC program is reviewed, considering the design and implementation of NASA's AFC multichip module.

Review of the Semiconductor Industry and Technology Roadmap.

ERIC Educational Resources Information Center

Kumar, Sameer; Krenner, Nicole

2002-01-01

Points out that the semiconductor industry is extremely competitive and requires ongoing technological advances to improve performance while reducing costs to remain competitive and how essential it is to gain an understanding of important facets of the industry. Provides an overview of the initial and current semiconductor technology roadmap that…

Knowledge and Attitude of Iranian Red Crescent Society Volunteers in Dealing with Chemical Attacks.

PubMed

Nadjafi, Maryam; Hamzeh Pour, Siavash

2017-04-01

To evaluate the knowledge, attitude, and preparedness of Mahabad Red Crescent Society volunteers in dealing with chemical attacks. This prospective cross-sectional study was conducted on 120 Red Crescent Society volunteers in Mahabad City, Iran, during 2014-2015.The knowledge of the volunteers was evaluated and rated using a questionnaire as poor, moderate, and good. Also, the attitude of the volunteers towards the chemical attacks and their preparedness were rated as appropriate and inappropriate using a questionnaire. Data were analyzed using the SPSS software version 21. From a total of 120 volunteers, 62.5% were males. The mean age of the volunteers was 32.0 ± 8.2 years. None of the volunteers had adequate knowledge regarding management of the consequences of chemical terrorist attacks. Only 10 volunteers (8.3%) had appropriate attitude and 7 (5.8%) stated their preparedness for being sent to the crisis zone. Also, 116 volunteers (96.7%) declared that Mahabad Red Crescent Society has an inappropriate level of preparedness to encounter chemical terrorism attacks and release of chemical agents related to petrochemical industrial chlorine resources into the water and wastewater. The findings of the present study show poor knowledge and inappropriate attitude of Mahabad Red Crescent Society volunteers, and rescuers in encountering probable chemical attacks and industrial accidents. Furthermore, the Red Crescent Society had an inappropriate level of preparedness in the field of chemical terrorism from the viewpoint of the studied volunteers.

To Advance and Diffuse the Knowledge of Physics...

NASA Astrophysics Data System (ADS)

Lustig, Harry

1999-10-01

: On May 20th,1899, thirty-six physicists founded the American Physical Society. A hundred years later, 11,239 scientists - the Society had by then 41,786 members, - gathered to mark both a century of physics and the Centennial of the Society. Selected tales from the author's comprehensive account of how the APS came about and developed and how it pusued its mission - the advancement and diffusion of the knowledge of physics - through its meetings, journals, and pulic activities, will be the subject of this talk.

Science, society, and the coastal groundwater squeeze

NASA Astrophysics Data System (ADS)

Michael, Holly A.; Post, Vincent E. A.; Wilson, Alicia M.; Werner, Adrian D.

2017-04-01

Coastal zones encompass the complex interface between land and sea. Understanding how water and solutes move within and across this interface is essential for managing resources for society. The increasingly dense human occupation of coastal zones disrupts natural groundwater flow patterns and degrades freshwater resources by both overuse and pollution. This pressure results in a "coastal groundwater squeeze," where the thin veneers of potable freshwater are threatened by contaminant sources at the land surface and saline groundwater at depth. Scientific advances in the field of coastal hydrogeology have enabled responsible management of water resources and protection of important ecosystems. To address the problems of the future, we must continue to make scientific advances, and groundwater hydrology needs to be firmly embedded in integrated coastal zone management. This will require interdisciplinary scientific collaboration, open communication between scientists and the public, and strong partnerships with policymakers.

Advanced Electronics Systems 1, Industrial Electronics 3: 9327.03.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

The 135 clock-hour course for the 12th year consists of outlines for blocks of instruction on transistor applications to basic circuits, principles of single sideband communications, maintenance practices, preparation for FCC licenses, application of circuits to advanced electronic systems, nonsinusoidal wave shapes, multivibrators, and blocking…

Industry Talks the Talk and Walks the Walk

ERIC Educational Resources Information Center

Lewis, C. Deanna

2008-01-01

Home Builders Institute (HBI), the workforce development arm of the National Association of Home Builders (NAHB), is dedicated to the advancement and enrichment of education and training programs serving the needs of the building industry. For more than 30 years, HBI has trained skilled workers in residential construction, promoted the industry as…

Components of sustainability considerations in management of petrochemical industries.

PubMed

Aryanasl, Amir; Ghodousi, Jamal; Arjmandi, Reza; Mansouri, Nabiollah

2017-06-01

Sustainability comprises three pillars of social, environmental, and economic aspects. Petrochemical industry has a great inter-related complex impact on social and economic development of societies and adverse impact on almost all environmental aspects and resource depletion in many countries, which make sustainability a crucial issue for petrochemical industries. This study was conducted to propose components of sustainability considerations in management of petrochemical industries.A combination of exploratory study-to prepare a preliminary list of components of sustainable business in petrochemical industries based on review of literature and Delphi-to obtain experts' view on this preliminary list and provide a detailed list of components and sub-components that should be addressed to bring sustainability to petrochemical industries, were used.Two sets of components were provided. First general components, which include stakeholders (staffs, society, and environment) with four sub-components, financial resources with 11 sub-components, improvement of design and processes with nine sub-components, policy and strategy of cleaner production with seven sub-components and leadership with seven sub-components. The second operational components included raw material supply and preparation with five, synthesis with ten, product separation and refinement with nine, product handling and storage with five, emission abatement with eight, and improvement of technology and equipment with 16 sub-components.

The American Society of Regional Anesthesia and Pain Medicine, the European Society of Regional Anaesthesia and Pain Therapy, and the Asian Australasian Federation of Pain Societies Joint Committee recommendations for education and training in ultrasound-guided interventional pain procedures.

PubMed

Narouze, Samer N; Provenzano, David; Peng, Philip; Eichenberger, Urs; Lee, Sang Chul; Nicholls, Barry; Moriggl, Bernhard

2012-01-01

The use of ultrasound in pain medicine for interventional axial, nonaxial, and musculoskeletal pain procedures is rapidly evolving and growing. Because of the lack of specialty-specific guidelines for ultrasonography in pain medicine, an international collaborative effort consisting of members of the Special Interest Group on Ultrasonography in Pain Medicine from the American Society of Regional Anesthesia and Pain Medicine, the European Society of Regional Anaesthesia and Pain Therapy, and the Asian Australasian Federation of Pain Societies developed the following recommendations for education and training in ultrasound-guided interventional pain procedures. The purpose of these recommendations is to define the required skills for performing ultrasound-guided pain procedures, the processes for appropriate education, and training and quality improvement. Training algorithms are outlined for practice- and fellowship-based pathways. The previously published American Society of Regional Anesthesia and Pain Medicine and European Society of Regional Anaesthesia and Pain Therapy education and teaching recommendations for ultrasound-guided regional anesthesia served as a foundation for the pain medicine recommendations. Although the decision to grant ultrasound privileges occurs at the institutional level, the committee recommends that the training guidelines outlined in this document serve as the foundation for educational training and the advancement of the practice of ultrasonography in pain medicine.

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 15: Administrative Information, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This volume developed by the Machine Tool Advanced Skill Technology (MAST) program contains key administrative documents and provides additional sources for machine tool and precision manufacturing information and important points of contact in the industry. The document contains the following sections: a foreword; grant award letter; timeline for…

Transferring Technology to Industry

NASA Technical Reports Server (NTRS)

Wolfenbarger, J. Ken

2006-01-01

This slide presentation reviews the technology transfer processes in which JPL has been involved to assist in transferring the technology derived from aerospace research and development to industry. California Institute of Technology (CalTech), the organization that runs JPL, is the leading institute in patents for all U.S. universities. There are several mechanisms that are available to JPL to inform industry of these technological advances: (1) a dedicated organization at JPL, National Space Technology Applications (NSTA), (2) Tech Brief Magazine, (3) Spinoff magazine, and (4) JPL publications. There have also been many start-up organizations and businesses from CalTech.

The Rock Valley College Career Advancement Program.

ERIC Educational Resources Information Center

Rock Valley Coll., Rockford, IL.

The Career Advancement Program (CAP) is a joint effort by a 2-year college and industrial firms in its district to expand educational opportunities, to match college programs to local needs, and to help industry meet its present and future technical manpower needs. CAP has worked to attract students, full- or part-time, to technical training.…

Advanced Selling: A Comprehensive Course Sales Project

ERIC Educational Resources Information Center

Yarrington-Young, Susan; Castleberry, Stephen B.; Coleman, Joshua T.

2016-01-01

A comprehensive project for the Advanced Selling course that has been tested at three universities is introduced. After selecting an industry and a company, students engage in a complete industry analysis, a company sales analysis, a sales-specific SWOT analysis, complete a ride day with a salesperson in that firm, then present their findings in a…

2010 Canadian Cardiovascular Society/Canadian Society of Echocardiography Guidelines for Training and Maintenance of Competency in Adult Echocardiography.

PubMed

Burwash, Ian G; Basmadjian, Arsene; Bewick, David; Choy, Jonathan B; Cujec, Bibiana; Jassal, Davinder S; MacKenzie, Scott; Nair, Parvathy; Rudski, Lawrence G; Yu, Eric; Tam, James W

2011-01-01

Guidelines for the provision of echocardiography in Canada were jointly developed and published by the Canadian Cardiovascular Society and the Canadian Society of Echocardiography in 2005. Since their publication, recognition of the importance of echocardiography to patient care has increased, along with the use of focused, point-of-care echocardiography by physicians of diverse clinical backgrounds and variable training. New guidelines for physician training and maintenance of competence in adult echocardiography were required to ensure that physicians providing either focused, point-of-care echocardiography or comprehensive echocardiography are appropriately trained and proficient in their use of echocardiography. In addition, revision of the guidelines was required to address technological advances and the desire to standardize echocardiography training across the country to facilitate the national recognition of a physician's expertise in echocardiography. This paper summarizes the new Guidelines for Physician Training and Maintenance of Competency in Adult Echocardiography, which are considerably more comprehensive than earlier guidelines and address many important issues not previously covered. These guidelines provide a blueprint for physician training despite different clinical backgrounds and help standardize physician training and training programs across the country. Adherence to the guidelines will ensure that physicians providing echocardiography have acquired sufficient expertise required for their specific practice. The document will also provide a framework for other national societies to standardize their training programs in echocardiography and will provide a benchmark by which competency in adult echocardiography may be measured. Copyright © 2011 Canadian Cardiovascular Society. Published by Elsevier Inc. All rights reserved.

Specification for Qualification and Certification for Level II - Advanced Welders.

ERIC Educational Resources Information Center

American Welding Society, Miami, FL.

This document defines the requirements and program for the American Welding Society (AWS) to certify advanced-level welders through an evaluation process entailing performance qualification and practical knowledge tests requiring the use of advanced reading, computational, and manual skills. The following items are included: statement of the…

The history of the Society of Urodynamics, Female Pelvic Medicine, and Urogenital Reconstruction.

PubMed

Weissbart, Steven J; Zimmern, Philippe E; Nitti, Victor W; Lemack, Gary E; Kobashi, Kathleen C; Vasavada, Sandip P; Wein, Alan J

2018-03-25

To review the history of the Society of Urodynamics, Female Pelvic Medicine and Urogenital Reconstruction (SUFU). We reviewed Society meeting minutes, contacted all living former Society presidents, searched the William P. Didusch Center for Urology History records, and asked Society members to share their important Society experiences in order to gather important historical information about the Society. The Society initially formed as the Urodynamics Society in 1969 in the backdrop of a growing passion for scientific research in the country after World War II ended. Since then, Society meetings have provided a pivotal forum for the advancement of science in lower urinary tract dysfunction. Meetings occurred annually until 2004, when the meeting schedule increased to biannual. The journal, Neurourology and Urodynamics, became the official journal of the Society in 2005. SUFU has authored important guidelines on urodynamics (2012), non-neurogenic overactive bladder (2012), and stress urinary incontinence (2017) and has shared important collaborations with other societies, including the American Urological Association (AUA), the International Continence Society (ICS), and the International Society of Pelvic Neuromodulation (ISPiN). SUFU has also been instrumental in trainee education and helped to establish formal fellowship training in the field in addition to holding a yearly educational meeting for urology residents. The Society has been led by 21 presidents throughout its history. Throughout the Society's near half-century long existence, the Society has fostered research, published guidelines, and educated trainees in order to improve the care of individuals suffering from lower urinary tract dysfunction. © 2018 Wiley Periodicals, Inc.

Undergraduate Training for Industrial Careers.

ERIC Educational Resources Information Center

Stehney, Ann K.

1983-01-01

Forty-eight mathematicians in industry, business, and government replied to a questionnaire on the relative merits of the traditional undergraduate curriculum, advanced topics in pure mathematics, computer programing, additional computer science, and specialized or applied topics. They favored programing and applied mathematics, along with a…

Office of Industrial Technologies research in progress

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-05-01

The US Department of Energy (DOE) Office of Industrial Technologies (OIT) conducts research and development activities which focus on improving energy efficiency and providing for fuel flexibility within US industry in the area of industrial conservation. The mission of OIT is to increase the utilization of existing energy-efficient equipment and to find and promote new, cost-effective ways for industrial facilities to improve their energy efficiency and minimize waste products. To ensure advancement of the technological leadership of the United States and to improve the competitiveness of American industrial products in world markets, OIT works closely with industrial partners, the staffsmore » of the national laboratories, and universities to identify research and development needs and to solve technological challenges. This report contains summaries of the currently active projects supported by the Office of Industrial Technologies.« less

2004 Education Industry

DTIC Science & Technology

2004-01-01

they may donate older equipment to K-12 schools for e- education . A great deal of learning can occur with minimal technology . WHY TARGET TEACHERS...success to continue, the education industry must respond to globalization, rapidly advancing technologies , and demographic changes in the US. The...of Education , Baltimore, MD Massachusetts Institute of Technology , Cambridge, MA Minuteman Regional High School of Applied Arts and Sciences

The state of advanced measurement and verification technology and industry application

DOE Office of Scientific and Technical Information (OSTI.GOV)

Granderson, Jessica; Fernandes, Samuel

2017-09-28

With the expansion of advanced metering and increased use of energy analytics tools, the energy efficiency community has begun to explore the application of advanced measurement and verification (or ‘M & V 2.0') technologies. Current literature recognizes their promise, but does not offer in-depth assessment of technical underpinnings. Here, this paper assesses the state of the technology and its application. Sixteen commercially available technologies were characterized and combined with a national review of their use.

Elderly people's interaction with advanced technology.

PubMed

Blažun, Helena; Vošner, Janez; Kokol, Peter; Saranto, Kaija; Rissanen, Sari

2014-01-01

Aging of population is an inevitable process by which the number of elderly people is increasing. Rapid development of information and communication technology (ICT) is changing basic needs of elderly people; therefore society should ensure opportunities for elderly to learn and use ICT in a way to manage their daily life activities and in this way enable them participation in the information and knowledge society. The purpose of the study was to find out whether elderly are acquainted with the advanced technology and to what extent they use it or they desire to use it. Within the single point study we interviewed 100 randomly selected elderly people from different geographical regions in Slovenia. Results showed the differences in the use of advanced technology by Slovenian regions; therefore in the future activities should be focused on organizing promotional and demonstrational activities including ICT courses to increase elderly's motivation for ICT interaction.

The Role of Education in Reinforcing the Group Model in Japanese Society.

ERIC Educational Resources Information Center

Collins, Kevin

Many attempts have been made to explain how modern Japan has, with speed and minimal stress, become competitive with Western nations in terms of military strength and industrial productivity. One factor commonly mentioned is the "groupishness," the collective orientation,that is basic to Japanese society. Some research has suggested that…

Skills Conversion Project, Chapter 4, Health Care and Health Services Industry.

ERIC Educational Resources Information Center

National Society of Professional Engineers, Washington, DC.

The Skills Conversion Project conducted by the National Society of Professional Engineers sought to study the transition mechanisms required to transfer available technical manpower from aerospace and defense industries into other areas of employment in private industry and public service. Fourteen study teams assessed the likelihood of future…

A Future-Oriented, Globally Based Curriculum Model for Industrial Technology.

ERIC Educational Resources Information Center

Hacker, Michael

1982-01-01

Presents a future-oriented curriculum approach for industrial technology programs. Major global issues provide the basic structure for curriculum development. These issues include energy management, resource management, technological advancement, and international relations. Rationales for industrial technology are discussed and a curriculum…

The culture of complexion: the impacts of society's role in shaping the definition of beauty.

PubMed

Carlock, Sarah; Russell, Brian

2015-05-01

The definition of beauty has evolved as the trends valued by the top of society change. For centuries, fair skin was a requirement of the Western definition of beauty; however, a shift in the 1920s made tanned skin the new standard. In this article, smoking and tanning are presented as risky behaviors that are perpetuated through industry advertising and exploitation of the authority of health professionals. The article further explores the culture of complexion in Western society before and after the 1920s as well as the consequences of tanning and efforts to rewrite society's definition of beauty.

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 13: Laser Machining, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 6: Welding, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 12: Instrumentation, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 5: Mold Making, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational speciality areas within the U.S. machine tool and metals-related…

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 3: Machining, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Cytometry: The Journal of the International Society for Analytical Cytology, Supplement 6, 1993: Abstracts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mayall, B.H.; Landay, A.L.; Shapiro, H.M.

1993-12-31

This contains the 465 presentation and poster abstracts for the XVI Congress of the International Society for Analytical Cytology, March 1993. Plenary Sessions included the following: Industrial Cytometry; Clinical Issues (in Cytology); Molecular Pathology; biotechnology; new biology; temporal cytometry.

An overview of the safety pharmacology society strategic plan.

PubMed

Pugsley, M K; Authier, S; Koerner, J E; Redfern, W S; Markgraf, C G; Brabham, T; Correll, K; Soloviev, M V; Botchway, A; Engwall, M; Traebert, M; Valentin, J-P; Mow, T J; Greiter-Wilke, A; Leishman, D J; Vargas, H M

2018-01-09

Safety Pharmacology studies are conducted to characterize the confidence by which biologically active new chemical entities (NCE) may be anticipated as safe. Non-clinical safety pharmacology studies aim to detect and characterize potentially undesirable pharmacodynamic activities using an array of in silico, in vitro and in vivo animal models. While a broad spectrum of methodological innovation and advancement of the science occurs within the Safety Pharmacology Society, the society also focuses on partnerships with health authorities and technology providers and facilitates interaction with organizations of common interest such as pharmacology, physiology, neuroscience, cardiology and toxicology. Education remains a primary emphasis for the society through content derived from regional and annual meetings, webinars and publication of its works it seeks to inform the general scientific and regulatory community. In considering the future of safety pharmacology the society has developed a strategy to successfully navigate forward and not be mired in stagnation of the discipline. Strategy can be defined in numerous ways but generally involves establishing and setting goals, determining what actions are needed to achieve those goals, and mobilizing resources within the society to accomplish the actions. The discipline remains in rapid evolution and its coverage is certain to expand to provide better guidance for more systems in the next few years. This overview from the Safety Pharmacology Society will outline the strategic plan from 2016 to 2018 and beyond and provide insight into the future of the discipline which builds upon a previous strategic plan established in 2009. Copyright © 2018 Elsevier Inc. All rights reserved.

Advanced Education and Technology Business Plan, 2011-14

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2011

2011-01-01

Advanced Education and Technology's mission is to lead the development of a knowledge-driven future through a dynamic and integrated advanced learning and innovation system. Its core businesses are to: (1) provide strategic leadership for Campus Alberta and Alberta Innovates; and (2) engage learners, industry and the community in learning…

Advanced gas turbine systems program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zeh, C.M.

1995-06-01

The U.S. Department of Energy (DOE) is sponsoring a program to develop fuel-efficient gas turbine-based power systems with low emissions. DOE`s Office of Fossil Energy (DOE/FE) and Office of Energy Efficiency and Renewable Energy (DOE/EE) have initiated an 8-year program to develop high-efficiency, natural gas-fired advanced gas turbine power systems. The Advanced Turbine Systems (ATS) Program will support full-scale prototype demonstration of both industrial- and utility-scale systems that will provide commercial marketplace entries by the year 2000. When the program targets are met, power system emissions will be lower than from the best technology in use today. Efficiency of themore » utility-scale units will be greater than 60 percent on a lower heating value basis, and emissions of carbon dioxide will be reduced inversely with this increase. Industrial systems will also see an improvement of at least 15 percent in efficiency. Nitrogen oxides will be reduced by at least 10 percent, and carbon monoxide and hydrocarbon emissions will each be kept below 20 parts per million, for both utility and industrial systems.« less

A roadmap towards advanced space weather science to protect society's technological infrastructure

NASA Astrophysics Data System (ADS)

Schrijver, Carolus

As mankind’s technological capabilities grow, society constructs a rapidly deepening insight into the workings of the universe at large, being guided by exploring space near to our home. But at the same time our societal dependence on technology increases and with that comes a growing appreciation of the challenges presented by the phenomena that occur in that space around our home planet: Magnetic explosions on the Sun and their counterparts in the geomagnetic field can in extreme cases endanger our all-pervasive electrical infrastructure. Powerful space storms occasionally lower the reliability of the globe-spanning satellite navigation systems and interrupt radio communications. Energetic particle storms lead to malfunctions and even failures in satellites that are critical to the flow of information in the globally connected economies. These and other Sun-driven effects on Earth’s environment, collectively known as space weather, resemble some other natural hazards in the sense that they pose a risk for the safe and efficient functioning of society that needs to be understood, quantified, and - ultimately - mitigated against. The complexity of the coupled Sun-Earth system, the sparseness by which it can be covered by remote-sensing and in-situ instrumentation, and the costs of the required observational and computational infrastructure warrant a well-planned and well-coordinated approach with cost-efficient solutions. Our team is tasked with the development of a roadmap with the goal of demonstrably improving our observational capabilities, scientific understanding, and the ability to forecast. This paper summarizes the accomplishments of the roadmap team in identifying the highest-priority challenges to achieve these goals.

Bridging the Gap Between Surveyors and the Geo-Spatial Society

NASA Astrophysics Data System (ADS)

Müller, H.

2016-06-01

For many years FIG, the International Association of Surveyors, has been trying to bridge the gap between surveyors and the geospatial society as a whole, with the geospatial industries in particular. Traditionally the surveying profession contributed to the good of society by creating and maintaining highly precise and accurate geospatial data bases, based on an in-depth knowledge of spatial reference frameworks. Furthermore in many countries surveyors may be entitled to make decisions about land divisions and boundaries. By managing information spatially surveyors today develop into the role of geo-data managers, the longer the more. Job assignments in this context include data entry management, data and process quality management, design of formal and informal systems, information management, consultancy, land management, all that in close cooperation with many different stakeholders. Future tasks will include the integration of geospatial information into e-government and e-commerce systems. The list of professional tasks underpins the capabilities of surveyors to contribute to a high quality geospatial data and information management. In that way modern surveyors support the needs of a geo-spatial society. The paper discusses several approaches to define the role of the surveyor within the modern geospatial society.

In defense of industry-physician relationships.

PubMed

Nakayama, Don K

2010-09-01

The objective was to examine the economic, ethical, and legal foundations for conflict of interest restrictions between physicians and pharmaceutical and medical device industries ("industry"). Recently academic medical centers and professional organizations have adopted policies that restrict permissible interactions between industry and physicians. The motive is to avoid financial conflicts of interest that compromise core values of altruism and fiduciary relationships. Productive relationships between industry and physicians provide novel drugs and devices of immense benefit to society. The issues are opposing views of medical economics, profit motives, medical professionalism, and extent to which interactions should be lawfully restricted. Industry goals are congruent with those of physicians: patient welfare, safety, and running a profitable business. Profits are necessary to develop drugs and devices. Physician collaborators invent products, refine them, and provide feedback and so are appropriately paid. Marketing is necessary to bring approved products to patients. Economic realities limit the extent to which physicians treat their patients altruistically and as fiduciaries. Providing excellent service to patients may be a more realistic standard. Statements from industry and the American College of Surgeons appropriately guide professional behavior. Preservation of industry-physician relationships is vital to maintain medical innovation and progress.

Advanced Space Propulsion

NASA Technical Reports Server (NTRS)

Frisbee, Robert H.

1996-01-01

system with a low initial development and infrastructure cost and a high operating cost. Note however that this has resulted in a 'Catch 22' standoff between the need for large initial investment that is amortized over many launches to reduce costs, and the limited number of launches possible at today's launch costs. Some examples of missions enabled (either in cost or capability) by advanced propulsion include long-life station-keeping or micro-spacecraft applications using electric propulsion or BMDO-derived micro-thrusters, low-cost orbit raising (LEO to GEO or Lunar orbit) using electric propulsion, robotic planetary missions using aerobraking or electric propulsion, piloted Mars missions using aerobraking and/or propellant production from Martian resources, very fast (100-day round-trip) piloted Mars missions using fission or fusion propulsion, and, finally, interstellar missions using fusion, antimatter, or beamed energy. The NASA Advanced Propulsion Technology program at the Jet Propulsion Laboratory (JPL) is aimed at assessing the feasibility of a range of near-term to far term advanced propulsion technologies that have the potential to reduce costs and/or enable future space activities. The program includes cooperative modeling and research activities between JPL and various universities and industry; and directly supported independent research at universities and industry. The cooperative program consists of mission studies, research and development of ion engine technology using C60 (Buckminsterfullerene) propellant, and research and development of lithium-propellant Lorentz-force accelerator (LFA) engine technology. The university/industry-supported research includes modeling and proof-of-concept experiments in advanced, high-lsp, long-life electric propulsion, and in fusion propulsion.

A Government/Industry Summary of the Design Analysis Methods for Vibrations (DAMVIBS) Program

NASA Technical Reports Server (NTRS)

Kvaternik, Raymond G. (Compiler)

1993-01-01

The NASA Langley Research Center in 1984 initiated a rotorcraft structural dynamics program, designated DAMVIBS (Design Analysis Methods for VIBrationS), with the objective of establishing the technology base needed by the rotorcraft industry for developing an advanced finite-element-based dynamics design analysis capability for vibrations. An assessment of the program showed that the DAMVIBS Program has resulted in notable technical achievements and major changes in industrial design practice, all of which have significantly advanced the industry's capability to use and rely on finite-element-based dynamics analyses during the design process.

Marine yeast isolation and industrial application.

PubMed

Zaky, Abdelrahman Saleh; Tucker, Gregory A; Daw, Zakaria Yehia; Du, Chenyu

2014-09-01

Over the last century, terrestrial yeasts have been widely used in various industries, such as baking, brewing, wine, bioethanol and pharmaceutical protein production. However, only little attention has been given to marine yeasts. Recent research showed that marine yeasts have several unique and promising features over the terrestrial yeasts, for example higher osmosis tolerance, higher special chemical productivity and production of industrial enzymes. These indicate that marine yeasts have great potential to be applied in various industries. This review gathers the most recent techniques used for marine yeast isolation as well as the latest applications of marine yeast in bioethanol, pharmaceutical and enzyme production fields. © 2014 The Authors FEMS Yeast Research published by John Wiley & Sons Ltd on behalf of Federation of European Microbiological Societies.

New directions in virtual environments and gaming to address obesity and diabetes: industry perspective.

PubMed

Ruppert, Barb

2011-03-01

Virtual reality is increasingly used for education and treatment in the fields of health and medicine. What is the health potential of virtual reality technology from the software development industry perspective? This article presents interviews with Ben Sawyer of Games for Health, Dr. Walter Greenleaf of InWorld Solutions, and Dr. Ernie Medina of MedPlay Technologies. Games for Health brings together researchers, medical professionals, and game developers to share information on the impact that game technologies can have on health, health care, and policy. InWorld is an Internet-based virtual environment designed specifically for behavioral health care. MedPlay Technologies develops wellness training programs that include exergaming technology. The interviewees share their views on software development and other issues that must be addressed to advance the field of virtual reality for health applications. © 2011 Diabetes Technology Society.

The Development of Nanotechnologies and Advanced Materials Industry in Science and Entrepreneurship: Scientific Indicators. A Case Study of Latvia (Part Three)

NASA Astrophysics Data System (ADS)

Geipele, S.; Geipele, I.; Kauskale, L.; Zeltins, N.; Staube, T.; Pudzis, E.

2017-10-01

The present scientific paper is the third part and continuation of the indepth scientific study of the developed system of engineering economic indicators, where the authors obtain results from the scientific research presented in a series of works on the development of the nanotechnologies and advanced materials industry in science and entrepreneurship in Latvia. Part three determines the crucial scientific indicators of the development of nano-field at the macro, micro, and meso development levels of the economic environment in Latvia. The paper provides the interaction of new identified indicators of nanofield in terms of further scientific and practical activities. Latvia is analysed in comparison with other countries in the world.

Industry perspectives

NASA Astrophysics Data System (ADS)

Fuqua, Don; Hannemann, Tim; Iacobellis, Sam F.; Young, A. Thomas

This discussion addresses the question of whether or not the space industry will take up the slack in the aerospace industry that is created by budget cuts in defense. Armed forces' research has provided an invaluable base for national technological and engineering resources for aerospace companies. It is noted that the space program should maximize the country's advances in national, scientific, and technical capabilities. It is also noted that NASA has done well in a most complicated business, but that Congress has failed to make a firm commitment to NASA's plans outlined in Vision 21 (based on the Augustine report) as evidenced by the Congressional reactions to NASA's budget requests. International cooperation and competition are discussed as well as the need for a political concensus on the direction of the space program in the U.S.

Recent Advances in Algal Genetic Tool Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

R. Dahlin, Lukas; T. Guarnieri, Michael

The goal of achieving cost-effective biofuels and bioproducts derived from algal biomass will require improvements along the entire value chain, including identification of robust, high-productivity strains and development of advanced genetic tools. Though there have been modest advances in development of genetic systems for the model alga Chlamydomonas reinhardtii, progress in development of algal genetic tools, especially as applied to non-model algae, has generally lagged behind that of more commonly utilized laboratory and industrial microbes. This is in part due to the complex organellar structure of algae, including robust cell walls and intricate compartmentalization of target loci, as well asmore » prevalent gene silencing mechanisms, which hinder facile utilization of conventional genetic engineering tools and methodologies. However, recent progress in global tool development has opened the door for implementation of strain-engineering strategies in industrially-relevant algal strains. Here, we review recent advances in algal genetic tool development and applications in eukaryotic microalgae.« less

Recent Advances in Algal Genetic Tool Development

DOE PAGES

R. Dahlin, Lukas; T. Guarnieri, Michael

2016-06-24

The goal of achieving cost-effective biofuels and bioproducts derived from algal biomass will require improvements along the entire value chain, including identification of robust, high-productivity strains and development of advanced genetic tools. Though there have been modest advances in development of genetic systems for the model alga Chlamydomonas reinhardtii, progress in development of algal genetic tools, especially as applied to non-model algae, has generally lagged behind that of more commonly utilized laboratory and industrial microbes. This is in part due to the complex organellar structure of algae, including robust cell walls and intricate compartmentalization of target loci, as well asmore » prevalent gene silencing mechanisms, which hinder facile utilization of conventional genetic engineering tools and methodologies. However, recent progress in global tool development has opened the door for implementation of strain-engineering strategies in industrially-relevant algal strains. Here, we review recent advances in algal genetic tool development and applications in eukaryotic microalgae.« less

An assessment of General Aviation utilization of advanced avionics technology

NASA Technical Reports Server (NTRS)

Quinby, G. F.

1980-01-01

Needs of the general aviation industry for services and facilities which might be supplied by NASA were examined. In the data collection phase, twenty-one individuals from nine manufacturing companies in general aviation were interviewed against a carefully prepared meeting format. General aviation avionics manufacturers were credited with a high degree of technology transfer from the forcing industries such as television, automotive, and computers and a demonstrated ability to apply advanced technology such as large scale integration and microprocessors to avionics functions in an innovative and cost effective manner. The industry's traditional resistance to any unnecessary regimentation or standardization was confirmed. Industry's self sufficiency in applying advanced technology to avionics product development was amply demonstrated. NASA research capability could be supportive in areas of basic mechanics of turbulence in weather and alternative means for its sensing.

The Resurgence of America's Auto Industry

ScienceCinema

Zimmer, Stephen; Cischke, Sue

2018-05-01

A look at how strategic investments and partnerships between the Energy Department and automakers have helped the American auto industry become a leader in advanced and fuel-efficient vehicles — creating jobs and boosting profits in the process.

Employment Lessons from the Electronics Industry.

ERIC Educational Resources Information Center

Alic, John A.; Harris, Martha Caldwell

1986-01-01

Semiskilled and "unskilled" workers in semiconductors, computer manufacturing, and consumer electronics industries are more likely than other workers to lose jobs because of technology, imports, and offshore production. However, advances in technology do tend to create jobs for skilled workers. (CT)

75 FR 20085 - Subpart B-Advanced Biofuel Payment Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

... biofuels industry is very capital intensive, the Agency is proposing multi-year contracts to enable advanced biofuels producers the assurance of a multi-year revenue stream. This approach is consistent with the goal of creating a stable industry. Finally, the Agency is proposing a two- tiered payment...

Educational Advancement and Manpower Development for Wage Earners.

ERIC Educational Resources Information Center

1971

The report describes a 2-year project that tested new approaches to helping workers better their lives and promote their careers by advancing their education. Through the cooperative efforts of industrial management and labor unions in Middlesex County in New Jersey, the New Jersey Department of Labor and Industry, with the assistance of the Labor…

Advanced Group Support Systems and Facilities

NASA Technical Reports Server (NTRS)

Noor, Ahmed K. (Compiler); Malone, John B. (Compiler)

1999-01-01

The document contains the proceedings of the Workshop on Advanced Group Support Systems and Facilities held at NASA Langley Research Center, Hampton, Virginia, July 19-20, 1999. The workshop was jointly sponsored by the University of Virginia Center for Advanced Computational Technology and NASA. Workshop attendees came from NASA, other government agencies, industry, and universities. The objectives of the workshop were to assess the status of advanced group support systems and to identify the potential of these systems for use in future collaborative distributed design and synthesis environments. The presentations covered the current status and effectiveness of different group support systems.

Advances in Microalgae-Derived Phytosterols for Functional Food and Pharmaceutical Applications.

PubMed

Luo, Xuan; Su, Peng; Zhang, Wei

2015-07-09

Microalgae contain a variety of bioactive lipids with potential applications in aquaculture feed, biofuel, food and pharmaceutical industries. While microalgae-derived polyunsaturated fatty acid (PUFA) and their roles in promoting human health have been extensively studied, other lipid types from this resource, such as phytosterols, have been poorly explored. Phytosterols have been used as additives in many food products such as spread, dairy products and salad dressing. This review focuses on the recent advances in microalgae-derived phytosterols with functional bioactivities and their potential applications in functional food and pharmaceutical industries. It highlights the importance of microalgae-derived lipids other than PUFA for the development of an advanced microalgae industry.

Advanced sensors technology survey

NASA Technical Reports Server (NTRS)

Cooper, Tommy G.; Costello, David J.; Davis, Jerry G.; Horst, Richard L.; Lessard, Charles S.; Peel, H. Herbert; Tolliver, Robert

1992-01-01

This project assesses the state-of-the-art in advanced or 'smart' sensors technology for NASA Life Sciences research applications with an emphasis on those sensors with potential applications on the space station freedom (SSF). The objectives are: (1) to conduct literature reviews on relevant advanced sensor technology; (2) to interview various scientists and engineers in industry, academia, and government who are knowledgeable on this topic; (3) to provide viewpoints and opinions regarding the potential applications of this technology on the SSF; and (4) to provide summary charts of relevant technologies and centers where these technologies are being developed.

Growth Hormone Research Society perspective on the development of long-acting growth hormone preparations

PubMed Central

Christiansen, Jens Sandahl; Backeljauw, Philippe F; Bidlingmaier, Martin; Biller, Beverly M K; Boguszewski, Margaret C S; Casanueva, Felipe F; Chanson, Philippe; Chatelain, Pierre; Choong, Catherine S; Clemmons, David R; Cohen, Laurie E; Cohen, Pinchas; Frystyk, Jan; Grimberg, Adda; Hasegawa, Yukihiro; Haymond, Morey W; Ho, Ken; Holly, Jeff M P; Horikawa, Reiko; Höybye, Charlotte; Jorgensen, Jens Otto L; Johannsson, Gudmundur; Juul, Anders; Katznelson, Laurence; Kopchick, John J; Lee, K O; Lee, Kuk-Wha; Luo, Xiaoping; Melmed, Shlomo; Miller, Bradley S; Misra, Madhusmita; Popovic, Vera; Rosenfeld, Ron G; Ross, Judith; Ross, Richard J; Saenger, Paul; Strasburger, Christian J; Thorner, Michael O; Werner, Haim; Yuen, Kevin

2016-01-01

Objective The Growth Hormone (GH) Research Society (GRS) convened a workshop to address important issues regarding trial design, efficacy, and safety of long-acting growth hormone preparations (LAGH). Participants A closed meeting of 55 international scientists with expertise in GH, including pediatric and adult endocrinologists, basic scientists, regulatory scientists, and participants from the pharmaceutical industry. Evidence Current literature was reviewed for gaps in knowledge. Expert opinion was used to suggest studies required to address potential safety and efficacy issues. Consensus process Following plenary presentations summarizing the literature, breakout groups discussed questions framed by the planning committee. Attendees reconvened after each breakout session to share group reports. A writing team compiled the breakout session reports into a draft document that was discussed and revised in an open forum on the concluding day. This was edited further and then circulated to attendees from academic institutions for review after the meeting. Participants from pharmaceutical companies did not participate in the planning, writing, or in the discussions and text revision on the final day of the workshop. Scientists from industry and regulatory agencies reviewed the manuscript to identify any factual errors. Conclusions LAGH compounds may represent an advance over daily GH injections because of increased convenience and differing phamacodynamic properties, providing the potential for improved adherence and outcomes. Better methods to assess adherence must be developed and validated. Long-term surveillance registries that include assessment of efficacy, cost-benefit, disease burden, quality of life, and safety are essential for understanding the impact of sustained exposure to LAGH preparations. PMID:27009113

Growth Hormone Research Society perspective on the development of long-acting growth hormone preparations.

PubMed

Christiansen, Jens Sandahl; Backeljauw, Philippe F; Bidlingmaier, Martin; Biller, Beverly M K; Boguszewski, Margaret C S; Casanueva, Felipe F; Chanson, Philippe; Chatelain, Pierre; Choong, Catherine S; Clemmons, David R; Cohen, Laurie E; Cohen, Pinchas; Frystyk, Jan; Grimberg, Adda; Hasegawa, Yukihiro; Haymond, Morey W; Ho, Ken; Hoffman, Andrew R; Holly, Jeff M P; Horikawa, Reiko; Höybye, Charlotte; Jorgensen, Jens Otto L; Johannsson, Gudmundur; Juul, Anders; Katznelson, Laurence; Kopchick, John J; Lee, K O; Lee, Kuk-Wha; Luo, Xiaoping; Melmed, Shlomo; Miller, Bradley S; Misra, Madhusmita; Popovic, Vera; Rosenfeld, Ron G; Ross, Judith; Ross, Richard J; Saenger, Paul; Strasburger, Christian J; Thorner, Michael O; Werner, Haim; Yuen, Kevin

2016-06-01

The Growth Hormone (GH) Research Society (GRS) convened a workshop to address important issues regarding trial design, efficacy, and safety of long-acting growth hormone preparations (LAGH). A closed meeting of 55 international scientists with expertise in GH, including pediatric and adult endocrinologists, basic scientists, regulatory scientists, and participants from the pharmaceutical industry. Current literature was reviewed for gaps in knowledge. Expert opinion was used to suggest studies required to address potential safety and efficacy issues. Following plenary presentations summarizing the literature, breakout groups discussed questions framed by the planning committee. Attendees reconvened after each breakout session to share group reports. A writing team compiled the breakout session reports into a draft document that was discussed and revised in an open forum on the concluding day. This was edited further and then circulated to attendees from academic institutions for review after the meeting. Participants from pharmaceutical companies did not participate in the planning, writing, or in the discussions and text revision on the final day of the workshop. Scientists from industry and regulatory agencies reviewed the manuscript to identify any factual errors. LAGH compounds may represent an advance over daily GH injections because of increased convenience and differing phamacodynamic properties, providing the potential for improved adherence and outcomes. Better methods to assess adherence must be developed and validated. Long-term surveillance registries that include assessment of efficacy, cost-benefit, disease burden, quality of life, and safety are essential for understanding the impact of sustained exposure to LAGH preparations. © 2016 The authors.

Basic Guidelines for University-Industry Research Relationships.

ERIC Educational Resources Information Center

Brannock, Jean C.; Denny, Amanda M.

1998-01-01

Universities should embrace university/industry relationships because they benefit both the institution and society. As such relationships evolve, the university should continually review its policies. The model used by Wake Forest University (North Carolina) for routinely reviewing research agreements is presented to assist other universities in…

Oxygenates for Advanced Petroleum-Based Diesel Fuels

DTIC Science & Technology

2001-02-01

needed. Do not return it to the originator. iii Oxygenates for Advanced Petroleum-Based Diesel Fuels INTERIM REPORT TFLRF No. 351 by David W. Naegeli ...Blends,” 219th American Chemical Society Meeting, San Francisco, CA, March 26-30, 2000. 5. Naegeli , D.W. and Moses, C.A., “Effects of Fuel...Alternative Fuels in an Advanced Automotive Diesel Engine,” SAE Paper 2000- 01-2048. 25. Vertin, K.D., Ohi, J.M., Naegeli , D.W., Childress, K.H

Industrial graphene metrology.

PubMed

Kyle, Jennifer Reiber; Ozkan, Cengiz S; Ozkan, Mihrimah

2012-07-07

Graphene is an allotrope of carbon whose structure is based on one-atom-thick planar sheets of carbon atoms that are densely packed in a honeycomb crystal lattice. Its unique electrical and optical properties raised worldwide interest towards the design and fabrication of future electronic and optical devices with unmatched performance. At the moment, extensive efforts are underway to evaluate the reliability and performance of a number of such devices. With the recent advances in synthesizing large-area graphene sheets, engineers have begun investigating viable methodologies for conducting graphene metrology and quality control at industrial scales to understand a variety of reliability issues including defects, patternability, electrical, and physical properties. This review summarizes the current state of industrial graphene metrology and provides an overview of graphene metrology techniques. In addition, a recently developed large-area graphene metrology technique based on fluorescence quenching is introduced. For each metrology technique, the industrial metrics it measures are identified--layer thickness, edge structure, defects, Fermi level, and thermal conductivity--and a detailed description is provided as to how the measurements are performed. Additionally, the potential advantages of each technique for industrial use are identified, including throughput, scalability, sensitivity to substrate/environment, and on their demonstrated ability to achieve quantified results. The recently developed fluorescence-quenching metrology technique is shown to meet all the necessary criteria for industrial applications, rendering it the first industry-ready graphene metrology technique.

Water research to support society: past, present and future

NASA Astrophysics Data System (ADS)

Arheimer, Berit

2014-05-01

. Historical changes in focus areas clearly reflect the shifts in societal needs, going from industrialization to the information society and globalization. Present research needs will be illustrated in the on-going practical work to support water managers and decision makers with hydrological forecasts, climate change impact assessments, improved water status for biodiversity and statistics for dimensioning safe infrastructure. Different approaches to applied research and ways to implement new knowledge in society will be discussed. Future research is suggested to embrace the complexity of the water systems by linking scales, monitoring systems, processes, disciplines and various users. Some ingredients to achieve a coordinated effort in the scientific community will be suggested, based on new technology, multi-data, transparency and the principles of sharing. To handle the problems of the Antropocene, improved knowledge accumulation to advance science and interactions with other disciplines is absolutely necessary. These should be the basic elements of Panta Rhei.

Offshore industry: management of health hazards in the upstream petroleum industry.

PubMed

Niven, Karen; McLeod, Ron

2009-08-01

Upstream oil and gas operations involve a range of activities, including exploration and drilling, conventional oil and gas production, extraction and processing of 'tar sands', heavy oil processing and pipeline operations. Firstly, to outline the nature of health risks in the offshore oil and gas industry to date. Secondly, to outline the commercial, technical and social challenges that could influence the future context of health management in the industry. Thirdly, to speculate how the health function within the industry needs to respond to these challenges. A review of the published literature was supplemented with industry subject matter and expert opinion. There was a relatively light peer-reviewed published literature base in an industry which is perceived as having changed little over three decades, so far as offshore health hazards for physical, chemical, biological hazards are concerned. Recent focus has been on musculoskeletal disorders and stress. The relative stability of the knowledge base regarding health hazards offshore may change as more innovative methods are employed to develop hydrocarbon resources in more 'difficult' environments. Society's willingness to accept risk is changing. Addressing potential health risks should be done much earlier in the planning process of major projects. This may reveal a skills gap in health professionals as a consequence of needing to employ more anticipatory tools, such as modelling exposure estimations and the skills and willingness to engage effectively with engineers and other HSSE professionals.

An Evaluation of Industrial/Organizational Psychology Teaching Modules for Use in Introductory Psychology.

ERIC Educational Resources Information Center

Maynard, Douglas C.; Bachiochi, Peter D.; Luna, Ana C.

2002-01-01

Evaluates four modules, created by the Society for Industrial and Organizational Psychology, for educating students about industrial/organizational (I/O) psychology. Reports that students' knowledge about I/O increased, and their interest in taking an I/O psychology course also increased. (CMK)

Community College Relations with Industry.

ERIC Educational Resources Information Center

Hatley, William D.

Not only is industry seeking a closer relationship with the community college, but employees themselves are becoming more interested in making career advances or mid-career changes. The Metropolitan Community Colleges of Kansas City, Missouri, have become aware of these changing educational needs through the realization that 2% of the students…

Applications of Microbial Enzymes in Food Industry.

PubMed

Raveendran, Sindhu; Parameswaran, Binod; Ummalyma, Sabeela Beevi; Abraham, Amith; Mathew, Anil Kuruvilla; Madhavan, Aravind; Rebello, Sharrel; Pandey, Ashok

2018-03-01

The use of enzymes or microorganisms in food preparations is an age-old process. With the advancement of technology, novel enzymes with wide range of applications and specificity have been developed and new application areas are still being explored. Microorganisms such as bacteria, yeast and fungi and their enzymes are widely used in several food preparations for improving the taste and texture and they offer huge economic benefits to industries. Microbial enzymes are the preferred source to plants or animals due to several advantages such as easy, cost-effective and consistent production. The present review discusses the recent advancement in enzyme technology for food industries. A comprehensive list of enzymes used in food processing, the microbial source of these enzymes and the wide range of their application are discussed.

Applications of Microbial Enzymes in Food Industry

PubMed Central

2018-01-01

Summary The use of enzymes or microorganisms in food preparations is an age-old process. With the advancement of technology, novel enzymes with wide range of applications and specificity have been developed and new application areas are still being explored. Microorganisms such as bacteria, yeast and fungi and their enzymes are widely used in several food preparations for improving the taste and texture and they offer huge economic benefits to industries. Microbial enzymes are the preferred source to plants or animals due to several advantages such as easy, cost-effective and consistent production. The present review discusses the recent advancement in enzyme technology for food industries. A comprehensive list of enzymes used in food processing, the microbial source of these enzymes and the wide range of their application are discussed. PMID:29795993

Space Technology Mission Directorate Game Changing Development Program FY2015 Annual Program Review: Advanced Manufacturing Technology

NASA Technical Reports Server (NTRS)

Vickers, John; Fikes, John

2015-01-01

The Advance Manufacturing Technology (AMT) Project supports multiple activities within the Administration's National Manufacturing Initiative. A key component of the Initiative is the Advanced Manufacturing National Program Office (AMNPO), which includes participation from all federal agencies involved in U.S. manufacturing. In support of the AMNPO the AMT Project supports building and Growing the National Network for Manufacturing Innovation through a public-private partnership designed to help the industrial community accelerate manufacturing innovation. Integration with other projects/programs and partnerships: STMD (Space Technology Mission Directorate), HEOMD, other Centers; Industry, Academia; OGA's (e.g., DOD, DOE, DOC, USDA, NASA, NSF); Office of Science and Technology Policy, NIST Advanced Manufacturing Program Office; Generate insight within NASA and cross-agency for technology development priorities and investments. Technology Infusion Plan: PC; Potential customer infusion (TDM, HEOMD, SMD, OGA, Industry); Leverage; Collaborate with other Agencies, Industry and Academia; NASA roadmap. Initiatives include: Advanced Near Net Shape Technology Integrally Stiffened Cylinder Process Development (launch vehicles, sounding rockets); Materials Genome; Low Cost Upper Stage-Class Propulsion; Additive Construction with Mobile Emplacement (ACME); National Center for Advanced Manufacturing.

The new world of discovery, invention, and innovation: convergence of knowledge, technology, and society

NASA Astrophysics Data System (ADS)

Roco, Mihail C.; Bainbridge, William S.

2013-09-01

Convergence of knowledge and technology for the benefit of society (CKTS) is the core opportunity for progress in the twenty-first century. CKTS is defined as the escalating and transformative interactions among seemingly different disciplines, technologies, communities, and domains of human activity to achieve mutual compatibility, synergism, and integration, and through this process to create added value and branch out to meet shared goals. Convergence has been progressing by stages over the past several decades, beginning with nanotechnology for the material world, followed by convergence of nanotechnology, biotechnology, information, and cognitive science (NBIC) for emerging technologies. CKTS is the third level of convergence. It suggests a general process to advance creativity, innovation, and societal progress based on five general purpose principles: (1) the interdependence of all components of nature and society, (2) decision analysis for research, development, and applications based on dynamic system-logic deduction, (3) enhancement of creativity and innovation through evolutionary processes of convergence that combines existing principles and divergence that generates new ones, (4) the utility of higher-level cross-domain languages to generate new solutions and support transfer of new knowledge, and (5) the value of vision-inspired basic research embodied in grand challenges. CKTS is a general purpose approach in knowledge society. It allows society to answer questions and resolve problems that isolated capabilities cannot, as well as to create new competencies, knowledge, and technologies on this basis. Possible solutions are outlined for key societal challenges in the next decade, including support for foundational emerging technologies NBIC to penetrate essential platforms of human activity and create new industries and jobs, improve lifelong wellness and human potential, achieve personalized and integrated healthcare and education, and secure a

PEO CS&CSS 2011: Advanced Planning Brief to Industry

DTIC Science & Technology

2011-10-28

technologically-advanced, proven equipment to enable and support the projection of Forces worldwide. • Modular Fuel Systems (MFS) • JAB • Fort Devens ... Fort Devens Base Camp Integration Lab Force Sustainment Systems 28 OCT 2011 22 PEO CS&CSS - APBI Force Sustainment Systems • Lifecycle Challenges...searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments

Major advances in globalization and consolidation of the artificial insemination industry.

PubMed

Funk, D A

2006-04-01

The artificial insemination (AI) industry in the United States has gone through many consolidations, mergers, and acquisitions over the past 25 yr. There are 5 major AI companies in the United States today: 3 large cooperatives, 1 private company, and 1 public company. The latter 2 have majority ownership outside of the United States. The AI industry in the United States progeny-tests more than 1,000 Holstein young sires per year. Because healthy, mature dairy bulls are capable of producing well over 100,000 straws of frozen semen per year, only a relatively small number of bulls are needed to breed the world's population of dairy cows. Most AI companies in the United States do not own many, if any, females and tend to utilize the same maternal families in their breeding programs. Little differences exist among the selection programs of the AI companies in the United States. The similarity of breeding programs and the extreme semen-production capabilities of bulls have contributed to difficulties the AI companies have had in developing genetically different product lines. Exports of North American Holstein genetics increased steadily from the 1970s into the 1990s because of the perceived superiority of North American Holsteins for dairy traits compared with European strains, especially for production. The breeding industry moved towards international genetic evaluations of bulls in the 1990s, with the International Bull Evaluation Service (Interbull) in Sweden coordinating the evaluations. The extensive exchange of elite genetics has led to a global dairy genetics industry with bulls that are closely related, and the average inbreeding level for the major dairy breeds continues to increase. Genetic markers have been used extensively and successfully by the industry for qualitative traits, especially for recessive genetic disorders, but markers have had limited impact for quantitative traits. Selection emphasis continues to migrate away from production traits and

Chemical Engineering in Education and Industry.

ERIC Educational Resources Information Center

Wei, James

1986-01-01

Provides an historical overview of the origins, developments, and contributions of chemical engineering. Reviews the roles of the university and industry in the education of chemical engineers. Includes a listing of the major advances of chemical engineering since World War II. (ML)

Advances and new directions in crystallization control.

PubMed

Nagy, Zoltan K; Braatz, Richard D

2012-01-01

The academic literature on and industrial practice of control of solution crystallization processes have seen major advances in the past 15 years that have been enabled by progress in in-situ real-time sensor technologies and driven primarily by needs in the pharmaceutical industry for improved and more consistent quality of drug crystals. These advances include the accurate measurement of solution concentrations and crystal characteristics as well as the first-principles modeling and robust model-based and model-free feedback control of crystal size and polymorphic identity. Research opportunities are described in model-free controller design, new crystallizer designs with enhanced control of crystal size distribution, strategies for the robust control of crystal shape, and interconnected crystallization systems for multicomponent crystallization.

Metabolic Engineering for Advanced Biofuels Production and Recent Advances Toward Commercialization

DOE PAGES

Meadows, Corey W.; Kang, Aram; Lee, Taek S.

2017-07-21

Research on renewable biofuels produced by microorganisms has enjoyed considerable advances in academic and industrial settings. As the renewable ethanol market approaches maturity, the demand is rising for the commercialization of more energy-dense fuel targets. Many strategies implemented in recent years have considerably increased the diversity and number of fuel targets that can be produced by microorganisms. Moreover, strain optimization for some of these fuel targets has ultimately led to their production at industrial scale. In this review, we discuss recent metabolic engineering approaches for augmenting biofuel production derived from alcohols, isoprenoids, and fatty acids in several microorganisms. In addition,more » we discuss successful commercialization ventures for each class of biofuel targets.« less

Metabolic Engineering for Advanced Biofuels Production and Recent Advances Toward Commercialization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meadows, Corey W.; Kang, Aram; Lee, Taek S.

Research on renewable biofuels produced by microorganisms has enjoyed considerable advances in academic and industrial settings. As the renewable ethanol market approaches maturity, the demand is rising for the commercialization of more energy-dense fuel targets. Many strategies implemented in recent years have considerably increased the diversity and number of fuel targets that can be produced by microorganisms. Moreover, strain optimization for some of these fuel targets has ultimately led to their production at industrial scale. In this review, we discuss recent metabolic engineering approaches for augmenting biofuel production derived from alcohols, isoprenoids, and fatty acids in several microorganisms. In addition,more » we discuss successful commercialization ventures for each class of biofuel targets.« less

Asian Society of Gynecologic Oncology International Workshop 2014.

PubMed

Park, Jeong Yeol; Ngan, Hextan Yuen Sheung; Park, Won; Cao, Zeyi; Wu, Xiaohua; Ju, Woong; Chung, Hyun Hoon; Chang, Suk Joon; Park, Sang Yoon; Ryu, Sang Young; Kim, Jae Hoon; Cho, Chi Heum; Lee, Keun Ho; Lee, Jeong Won; Kumarasamy, Suresh; Kim, Jae Weon; Wilailak, Sarikapan; Kim, Byoung Gie; Kim, Dae Yeon; Konishi, Ikuo; Lee, Jae Kwan; Wang, Kung Liahng; Nam, Joo Hyun

2015-01-01

The Asian Society of Gynecologic Oncology International Workshop 2014 on gynecologic oncology was held in Asan Medical Center, Seoul, Korea on the 23rd to 24th August 2014. A total of 179 participants from 17 countries participated in the workshop, and the up-to-date findings on the management of gynecologic cancers were presented and discussed. This meeting focused on the new trends in the management of cervical cancer, fertility-sparing management of gynecologic cancers, surgical management of gynecologic cancers, and recent advances in translational research on gynecologic cancers.

Asian Society of Gynecologic Oncology International Workshop 2014

PubMed Central

Park, Jeong-Yeol; Ngan, Hextan Yuen Sheung; Park, Won; Cao, Zeyi; Wu, Xiaohua; Ju, Woong; Chung, Hyun Hoon; Chang, Suk-Joon; Park, Sang-Yoon; Ryu, Sang-Young; Kim, Jae-Hoon; Cho, Chi-Heum; Lee, Keun Ho; Lee, Jeong-Won; Kumarasamy, Suresh; Kim, Jae-Weon; Wilailak, Sarikapan; Kim, Byoung-Gie; Kim, Dae-Yeon; Konishi, Ikuo; Lee, Jae-Kwan; Wang, Kung-Liahng

2015-01-01

The Asian Society of Gynecologic Oncology International Workshop 2014 on gynecologic oncology was held in Asan Medical Center, Seoul, Korea on the 23rd to 24th August 2014. A total of 179 participants from 17 countries participated in the workshop, and the up-to-date findings on the management of gynecologic cancers were presented and discussed. This meeting focused on the new trends in the management of cervical cancer, fertility-sparing management of gynecologic cancers, surgical management of gynecologic cancers, and recent advances in translational research on gynecologic cancers. PMID:25609163

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 9: Tool and Die, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 8: Sheet Metal & Composites, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 4: Manufacturing Engineering Technology, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 14: Automated Equipment Technician (CIM), of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 10: Computer-Aided Drafting & Design, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Research Opportunities in Advanced Aerospace Concepts

NASA Technical Reports Server (NTRS)

Jones, Gregory S.; Bangert, Linda S.; Garber, Donald P.; Huebner, Lawrence D.; McKinley, Robert E.; Sutton, Kenneth; Swanson, Roy C., Jr.; Weinstein, Leonard

2000-01-01

This report is a review of a team effort that focuses on advanced aerospace concepts of the 21st Century. The paper emphasis advanced technologies, rather than cataloging every unusual aircraft that has ever been attempted. To dispel the myth that "aerodynamics is a mature science" an extensive list of "What we cannot do, or do not know" was enumerated. A zeit geist, a feeling for the spirit of the times, was developed, based on existing research goals. Technological drivers and the constraints that might influence these technological developments in a future society were also examined. The present status of aeronautics, space exploration, and non-aerospace applications, both military and commercial, including enabling technologies are discussed. A discussion of non-technological issues affecting advanced concepts research is presented. The benefit of using the study of advanced vehicles as a tool to uncover new directions for technology development is often necessary. An appendix is provided containing examples of advanced vehicle configurations currently of interest.

The influence of industry actions on the availability of alcoholic beverages in the African region.

PubMed

Babor, Thomas F; Robaina, Katherine; Jernigan, David

2015-04-01

The alcohol beverage industry has been expanding its corporate social responsibility and other business activities in sub-Saharan Africa. The aim of this paper is to evaluate the effects of these activities on the physical, economic, psychological and social availability of alcohol in the region. Narrative review. Source materials came from the business press, industry sources (websites, annual reports, press releases, conference proceedings) and the scientific literature published since 2000. The alcohol industry has intensified its activities in the African region, through their funding of social aspect organizations, technical publications, policy workshops and other corporate social responsibility activities. Marketing campaigns, new product designs and the development of industry-civil society partnerships have increased. There is evidence that the alcohol industry also engages in lobbying, information dissemination and legal action to thwart effective public health measures. The corporate social responsibility activities of the global alcohol industry have provided a vehicle to promote industry-favorable policies and increase the physical, economic, social and psychological availability of alcohol. © 2015 Society for the Study of Addiction.

The role of industry in Internet education.

PubMed

Wieting, Mark W; Mevis, Howard; Zuckerman, Joseph D

2003-07-01

Each year hundreds of accredited continuing medical education conferences and meetings receive industry support through unrestricted educational grants. Many of these programs might not occur without this funding support. With the explosive growth of continuing medical education on the Internet, industry again is being asked to provide assistance through unrestricted educational grants and in some instances educational content. At the same time, industry is using the Internet to provide orthopaedic surgeons with education and information about their products and services. Education and information do not require continuing medical education accreditation to be valuable. Although some people in continuing medical education voice ethical concerns regarding the nature of industry's involvement in education, meeting the needs of orthopaedic surgeons remains the top priority. As demands on the orthopaedic surgeons' time continue to impact participation in educational meetings, industry will continue to play a critical role in helping educational organizations such as medical specialty societies develop new, innovative educational programs for presentation via the Internet.

Trends and developments in industrial machine vision: 2013

NASA Astrophysics Data System (ADS)

Niel, Kurt; Heinzl, Christoph

2014-03-01

When following current advancements and implementations in the field of machine vision there seems to be no borders for future developments: Calculating power constantly increases, and new ideas are spreading and previously challenging approaches are introduced in to mass market. Within the past decades these advances have had dramatic impacts on our lives. Consumer electronics, e.g. computers or telephones, which once occupied large volumes, now fit in the palm of a hand. To note just a few examples e.g. face recognition was adopted by the consumer market, 3D capturing became cheap, due to the huge community SW-coding got easier using sophisticated development platforms. However, still there is a remaining gap between consumer and industrial applications. While the first ones have to be entertaining, the second have to be reliable. Recent studies (e.g. VDMA [1], Germany) show a moderately increasing market for machine vision in industry. Asking industry regarding their needs the main challenges for industrial machine vision are simple usage and reliability for the process, quick support, full automation, self/easy adjustment at changing process parameters, "forget it in the line". Furthermore a big challenge is to support quality control: Nowadays the operator has to accurately define the tested features for checking the probes. There is an upcoming development also to let automated machine vision applications find out essential parameters in a more abstract level (top down). In this work we focus on three current and future topics for industrial machine vision: Metrology supporting automation, quality control (inline/atline/offline) as well as visualization and analysis of datasets with steadily growing sizes. Finally the general trend of the pixel orientated towards object orientated evaluation is addressed. We do not directly address the field of robotics taking advances from machine vision. This is actually a fast changing area which is worth an own

Advanced cogeneration research study: Executive summary

NASA Technical Reports Server (NTRS)

Bluhm, S. A.; Moore, N.; Rosenberg, L.; Slonski, M.

1983-01-01

This study provides a broad based overview of selected areas relevant to the development of a comprehensive Southern California Edison (SCE) advanced cogeneration project. The areas studied are: (1) Cogeneration potential in the SCE service territory; (2) Advanced cogeneration technologies; and (3) Existing cogeneration computer models. An estimated 3700 MW sub E could potentially be generated from existing industries in the Southern California Edison service territory using cogeneration technology. Of this total, current technology could provide 2600 MW sub E and advanced technology could provide 1100 MW sub E. The manufacturing sector (SIC Codes 20-39) was found to have the highest average potential for current cogeneration technology. The mining sector (SIC Codes 10-14) was found to have the highest potential for advanced technology.

Demandite, lunar materials and space industrialization

NASA Technical Reports Server (NTRS)

Criswell, D. R.

1977-01-01

Terrestrial industry consumes a wide range of elements in producing the outputs which support and make industrial societies possible. 'Demandite' is a conceptual or synthetic molecule which is composed of the weight fractions of the major elements consumed by industry. Demandite needed for mature industrial activities in space will differ from the terrestrial composition because solar energy must replace hydrocarbon-energy, lunar and asteroidal bulk compositions are different from mineral deposits on the earth, and the major bulk processing in space will be the creation of radiation shielding for human habitats to provide real estate in space complete with water, atmosphere and life-stock elements. Demandite cost may be dominated by earth to deep space transport cost of minor elemental constituents depleted in the lunar soils unless careful attention is given to substitution of materials, searches of the moon (polar regions) and asteroids for the depleted elements, and continuing lowering of earth to deep space transport costs.

Ready for Takeoff: China’s Advancing Aerospace Industry

DTIC Science & Technology

2011-01-01

designed to study the effects of radiation and microgravity on different varieties of fruit and vegetable seeds, fungi , and molecular biomaterials. No...negatively affect U.S. interests and would increase the costs—human and material—of resisting such force. xiv Ready for Takeoff: China’s Advancing...summarizes projec- tions of its future growth, and analyzes factors that are likely to affect that growth, such as the availability of high-speed rail

Where Are the Women? The Underrepresentation of Women Physicians Among Recognition Award Recipients From Medical Specialty Societies.

PubMed

Silver, Julie K; Slocum, Chloe S; Bank, Anna M; Bhatnagar, Saurabha; Blauwet, Cheri A; Poorman, Julie A; Villablanca, Amparo; Parangi, Sareh

2017-08-01

Membership in medical societies is associated with a number of benefits to members that may include professional education, opportunities to present research, scientific and/or leadership training, networking, and others. In this perspective article, the authors address the value that medical specialty society membership and inclusion have in the development of an academic physician's career and how underrepresentation of women may pose barriers to their career advancement. Because society membership itself is not likely sufficient to support the advancement of academic physicians, this report focuses on one key component of advancement that also can be used as a measure of inclusion in society activities-the representation of women physicians among recipients of recognition awards. Previous reports demonstrated underrepresentation of women physicians among recognition award recipients from 2 physical medicine and rehabilitation specialty organizations, including examples of zero or near-zero results. This report investigated whether zero or near-zero representation of women physicians among recognition award recipients from medical specialty societies extended beyond the field of physical medicine and rehabilitation. Examples of the underrepresentation of women physicians, as compared with their presence in the respective field, was found across a range of additional specialties, including dermatology, neurology, anesthesiology, orthopedic surgery, head and neck surgery, and plastic surgery. The authors propose a call for action across the entire spectrum of medical specialty societies to: (1) examine gender diversity and inclusion data through the lens of the organization's mission, values, and culture; (2) transparently report the results to members and other stakeholders including medical schools and academic medical centers; (3) investigate potential causes of less than proportionate representation of women; (4) implement strategies designed to improve

Eat healthy? Attitudes of the German population towards industrially produced cardioprotective food.

PubMed

Jung, F U C E; Luck-Sikorski, C; Krüger, M; Wiacek, C; Braun, P G; Engeli, S; Riedel-Heller, S G

2018-05-01

Cardiovascular disease (CVD) is likely to increase in incidence. Foods with cardioprotective functions, e.g. specific functional food, could reduce CVD risk factors and hence CVD incidence. Little is known about industrially modified foods with cardioprotective functions. In a large German sample (n = 1007), attitudes of consumers in Germany towards industrially produced cardioprotective food were assessed using Cluster analyses. Consumers were contacted via telephone and interviewed using questionnaires. Overall, about 25% knew about industrially produced food with cardioprotective function. Our analysis revealed a small but determined group of consumers who think very skeptical about cardioprotective products, but we also identified a favorable group. These two groups only differed in age, with the skeptical group being ten years older. The rising number of industrially modified products with potential cardioprotective benefit is met by skepticism and a lack of knowledge by German costumers. If large scale studies show health benefits of these products, these will need to be better communicated to German customers in order to address possible doubts or concerns and to encourage healthy eating habits in consumer eating behavior. Copyright © 2018 The Italian Society of Diabetology, the Italian Society for the Study of Atherosclerosis, the Italian Society of Human Nutrition, and the Department of Clinical Medicine and Surgery, Federico II University. Published by Elsevier B.V. All rights reserved.

A Brief History of the Emergy Society and its Mission in the ...

EPA Pesticide Factsheets

In 2002, H.T. Odum authorized the formation of a society dedicated to research, communication, and education focused on the new ideas of emergy and transformity and their basis in Energy Systems Theory. From this initial concept and after a 5 period of incubation, the International Society for the Advancement of Emergy Research (ISAER), a.k.a., the Emergy Society, was incorporated as a nonprofit corporation in the United States on July 28, 2007. In this talk, the history of the Emergy Society from its origin to the present time will be presented. The key ideas of emergy and transformity and their derivation and importance will be discussed. The structure of the Emergy Society and how it has carried out its mission over its history will be examined, including the formation of the China Chapter of ISAER. In many ways the history of ISAER is a story about its Presidents and the Executive Council members, who worked hard to promote the growth of the Emergy Society and to expand its services to its membership and the world. The development of the Emergy Society website as the major interface to communicate with its members and the general public will be recounted along with the story of the development of the Emergy Society logo and its esoteric meaning. Finally, the accomplishments of ISAER in the United States, China, Brazil and Europe to date will be considered and the future of the Emergy Society explored. This talk was delivered as a plenary address to the asse

Optimization of industrial microorganisms: recent advances in synthetic dynamic regulators.

PubMed

Min, Byung Eun; Hwang, Hyun Gyu; Lim, Hyun Gyu; Jung, Gyoo Yeol

2017-01-01

Production of biochemicals by industrial fermentation using microorganisms requires maintaining cellular production capacity, because maximal productivity is economically important. High-productivity microbial strains can be developed using static engineering, but these may not maintain maximal productivity throughout the culture period as culture conditions and cell states change dynamically. Additionally, economic reasons limit heterologous protein expression using inducible promoters to prevent metabolic burden for commodity chemical and biofuel production. Recently, synthetic and systems biology has been used to design genetic circuits, precisely controlling gene expression or influencing genetic behavior toward a desired phenotype. Development of dynamic regulators can maintain cellular phenotype in a maximum production state in response to factors including cell concentration, oxygen, temperature, pH, and metabolites. Herein, we introduce dynamic regulators of industrial microorganism optimization and discuss metabolic flux fine control by dynamic regulators in response to metabolites or extracellular stimuli, robust production systems, and auto-induction systems using quorum sensing.

Removal of organic wastewater contaminants in septic systems using advanced treatment technologies

USGS Publications Warehouse

Wilcox, J.D.; Bahr, J.M.; Hedman, C.J.; Hemming, J.D.C.; Barman, M.A.E.; Bradbury, K.R.

2009-01-01

The detection of pharmaceuticals and other organic wastewater contaminants (OWCs) in ground water and surface-water bodies has raised concerns about the possible ecological impacts of these compounds on nontarget organisms. On-site wastewater treatment systems represent a potentially significant route of entry for organic contaminants to the environment. In this study, effluent samples were collected and analyzed from conventional septic systems and from systems using advanced treatment technologies. Six of 13 target compounds were detected in effluent from at least one septic system. Caffeine, paraxanthine, and acetaminophen were the most frequently detected compounds, and estrogenic activity was detected in 14 of 15 systems. The OWC concentrations were significantly lower in effluent after sand filtration (p < 0.01) or aerobic treatment (p < 0.05) as compared with effluent that had not undergone advanced treatment. In general, concentrations in conventional systems were comparable to those measured in previous studies of municipal wastewater treatment plant (WWTP) influent, and concentrations in systems after advanced treatment were comparable to previously measured concentrations in WWTP effluent. These data indicate that septic systems using advanced treatment can reduce OWCs in treated effluent to similar concentrations as municipal WWTPs. Copyright ?? 2009 by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America. All rights reserved.

SCCT guidelines for the performance and acquisition of coronary computed tomographic angiography: A report of the society of Cardiovascular Computed Tomography Guidelines Committee: Endorsed by the North American Society for Cardiovascular Imaging (NASCI).

PubMed

Abbara, Suhny; Blanke, Philipp; Maroules, Christopher D; Cheezum, Michael; Choi, Andrew D; Han, B Kelly; Marwan, Mohamed; Naoum, Chris; Norgaard, Bjarne L; Rubinshtein, Ronen; Schoenhagen, Paul; Villines, Todd; Leipsic, Jonathon

In response to recent technological advancements in acquisition techniques as well as a growing body of evidence regarding the optimal performance of coronary computed tomography angiography (coronary CTA), the Society of Cardiovascular Computed Tomography Guidelines Committee has produced this update to its previously established 2009 "Guidelines for the Performance of Coronary CTA" (1). The purpose of this document is to provide standards meant to ensure reliable practice methods and quality outcomes based on the best available data in order to improve the diagnostic care of patients. Society of Cardiovascular Computed Tomography Guidelines for the Interpretation is published separately (2). The Society of Cardiovascular Computed Tomography Guidelines Committee ensures compliance with all existing standards for the declaration of conflict of interest by all authors and reviewers for the purpose ofclarity and transparency. Copyright © 2016 Society of Cardiovascular Computed Tomography. All rights reserved.

Job Loss and Survival Strategies in the Textile and Apparel Industries.

ERIC Educational Resources Information Center

Mittelhauser, Mark

1996-01-01

Discusses the job loss in the textile and apparel industries because of fierce domestic and international competition that has closed mills and factories. Suggests that intensified competition and advanced technology will ensure turbulent and challenging years ahead for the domestic industries. (JOW)

Air Pollutant Emissions Projections for the Cement and Steel Industry in China and the Impact of Emissions Control Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hasanbeigi, Ali; Khanna, Nina; Price, Lynn

China’s cement and steel industry accounts for approximately half of the world’s total cement and steel production. These two industries are two of the most energy-intensive and highest carbon dioxide (CO 2)-emitting industries and two of the key industrial contributors to air pollution in China. For example, the cement industry is the largest source of particulate matter (PM) emissions in China, accounting for 40 percent of its industrial PM emissions and 27 percent of its total national PM emissions. The Chinese steel industry contributed to approximately 20 percent of sulfur dioxide (SO 2) emissions and 27 percent of PM emissionsmore » for all key manufacturing industries in China in 2013. In this study, we analyzed and projected the total PM and SO2 emissions from the Chinese cement and steel industry from 2010–2050 under three different scenarios: a Base Case scenario, an Advanced scenario, and an Advanced EOP (end-of-pipe) scenario. We used bottom-up emissions control technologies data and assumptions to project the emissions. In addition, we conducted an economic analysis to estimate the cost for PM emissions reductions in the Chinese cement industry using EOP control technologies, energy efficiency measures, and product change measures. The results of the emissions projection showed that there is not a substantial difference in PM emissions between the Base Case and Advanced scenarios, for both the cement and steel industries. This is mainly because PM emissions in the cement industry caused mainly by production process and not the fuel use. Since our forecast for the cement production in the Base Case and Advanced scenarios are not too different from each other, this results in only a slight difference in PM emissions forecast for these two scenarios. Also, we assumed a similar share and penetration rate of control technologies from 2010 up to 2050 for these two scenarios for the cement and steel industry. However, the Advanced EOP scenario showed

Parental choice: what parents want in a son-in-law and a daughter-in-law across 67 pre-industrial societies.

PubMed

Apostolou, Menelaos

2010-11-01

Parents are influential over mate choice, and in most human societies they choose spouses for their offspring according to their own preferences. However, surprising little is known about the qualities which make a woman desirable as a daughter-in-law and a man desirable as a son-in-law. Using evidence from 67 societies such traits are identified and three hypotheses are tested: first, the hypothesis is tested that parents desire in an in-law qualities which are beneficial to them and their kin. Second, it is hypothesized that such preferences are contingent upon the sex of the in-law, as traits are weighted differently in a daughter-in-law and in a son-in-law. The third hypothesis tested is that parental preferences vary according to the subsistence type of a given society, as traits are valued differently in agropastoral societies and foraging societies. The evidence presented here provides support for all three hypotheses.

Industrial ecology: a new perspective on the future of the industrial system.

PubMed

Erkman, S

2001-09-22

Industrial ecology? A surprising, intriguing expression that immediately draws our attention. The spontaneous reaction is that "industrial ecology" is a contradiction in terms, something of an oxymoron, like "obscure clarity" or "burning ice". Why this reflex? Probably because we are accustomed to considering the industrial system as isolated from the Biosphere, with factories and cities on one side and nature on the other, as well as the recurrent problem of trying to minimise th impact of the industrial system on what is "beyond" it: its surroundings, the "environment". As early as the 1950's, this end-of-pipe angle was the one adopted by ecologists, whose first serious studies focused on the consequences of the various forms of pollution on nature. In this perspective on the industrial system, human industrial activity as such remained outside the field of research. Industrial ecology explores the opposite assumption: The industrial system can be seen as a certain kind of ecosystem. After all, the industrial system, just as natural ecosystems, can be described as a particular distribution of materials, energy, and information flows. Furthermore, the entire industrial system relies on resources and services provided by the Biosphere, from which it cannot be dissociated. (It should be specified that "industrial", in the context of industrial ecology, refers to all human activities occurring within modern technological society. Thus, tourism, housing, medical services, transportation, agriculture, etc. are part of the industrial system.) Besides its rigorous scientific conceptual framework (scientific ecology), industrial ecology can also be seen as a practical approach to sustainability. It is an attempt to address the question, "How can the concept of sustainable development be made operational in an economically feasible way?" Industrial ecology represents precisely one of the paths that could provide concrete solutions. Governments have traditionally approached

Advances in Microalgae-Derived Phytosterols for Functional Food and Pharmaceutical Applications

PubMed Central

Luo, Xuan; Su, Peng; Zhang, Wei

2015-01-01

Microalgae contain a variety of bioactive lipids with potential applications in aquaculture feed, biofuel, food and pharmaceutical industries. While microalgae-derived polyunsaturated fatty acid (PUFA) and their roles in promoting human health have been extensively studied, other lipid types from this resource, such as phytosterols, have been poorly explored. Phytosterols have been used as additives in many food products such as spread, dairy products and salad dressing. This review focuses on the recent advances in microalgae-derived phytosterols with functional bioactivities and their potential applications in functional food and pharmaceutical industries. It highlights the importance of microalgae-derived lipids other than PUFA for the development of an advanced microalgae industry. PMID:26184233

77 FR 16769 - Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-22

... Conservation Program for Certain Industrial Equipment: Energy Conservation Standards and Test Procedures for...-Conditioning Engineers (ASHRAE)/Illuminating Engineering Society of North America (IESNA) Standard 90.1-2010... Industrial Equipment, which includes the commercial heating, air-conditioning, and water-heating equipment...

An evolutionary account of status, power, and career in modern societies.

PubMed

Fieder, Martin; Huber, Susanne

2012-06-01

We hypothesize that in modern societies the striving for high positions in the hierarchy of organizations is equivalent to the striving for status and power in historical and traditional societies. Analyzing a sample of 4,491 US men and 5,326 US women, we find that holding a supervisory position or being in charge of hiring and firing is positively associated with offspring count in men but not in women. The positive effect in men is attributable mainly to the higher proportion of childlessness among men in non-supervisory positions and those without the power to hire and fire. This effect is in accordance with the positive relationship between other status indicators and reproductive success found in men from traditional, historical, and modern societies. In women, we further find a curvilinear relationship between income percentile and offspring number by analyzing US census data, indicating that women may strive for resources associated with advancement rather than for status per se.

The cooperation of the government and digital media industry in social development (a study in Cirebon city, West Java, Indonesia)

NASA Astrophysics Data System (ADS)

Kusuma, M.; Mariana, D.; Anwar, R. K.

2018-03-01

This study explores the role of government in encouraging and providing a model of economic growth, including in the field of micro, small, and medium enterprises. The case studied in this research is the digital media industry. It could be a potential in creating public welfare. The questions in this research are about how to model a development of community-based digital media industry in Cirebon City, West Java; whether the government could bring people to the digital media industry to foster a productive economic society; and how the community appreciates and becomes a part of the digital media industry. By using descriptive and qualitative methods, this study finds that the government has sufficiently active roles in the development of the digital media industry in the society. The society itself has already been open-minded in responding the government’s programs and the development of contemporary technology, such as in the field of selling goods and services. Still, some obstacles might continue to be refined for the success of the community’s digital media industry.

[Some engineering problems on developing production industry of modern traditional Chinese medicine].

PubMed

Qu, Hai-bin; Cheng, Yi-yu; Wang, Yue-sheng

2003-10-01

Based on the review of some engineering problems on developing modern production industry of Traditional Chinese Medicine (TCM), the differences of TCM production industry between China and abroad were pointed out. Accelerating the application and extension of high-tech and computer integrated manufacturing system (CIMS) were suggested to promote the technology advancement of TCM industry.

Geosciences: an important tool for the ethical advancement and the economic and cultural development of our society

NASA Astrophysics Data System (ADS)

Vito Graziano, Gian

2013-04-01

The development of a society in economic, cultural and ethical terms is always linked to the growth of the scientific and technical knowledge. It follows that the downsizing of the scientific research brings to a slower growth or even, as it is happening these days in Italy, a real cultural decay. The consequences of the economic crisis are evident to everyone, but it is precisely in times of crisis that the best strategies to restart the economy and give new cultural perspectives to society are studied. The crisis is also contrasted with ideas and ability to put them into practice. This, however, also presupposes a different cultural approach, which has to also include a review of values and beliefs, and a redefinition of the objectives to be pursued. This approach is modeled on the basis of several positive experiences that a country can boast. Among these experiences, there are those arising from the scientific culture: geology, for example, such as chemistry, biology or other sciences, can help to change vision. The research and practice of Earth sciences have important implications on the life and activities of the population and therefore the geoscientists, as active subjects in the society, should question their role and responsibilities. They should be at the service of society, especially in the fields of prevention from natural hazards and valorization of georesources. In this sense they can give important indications for economy and development of their country. The Italian Council of Geologists (Consiglio Nazionale dei Geologi - CNG) acts with the aim of highlighting the social role of geoscientists, hoping for a new cultural Renaissance, which leads to new researches, without obscurantism or prejudices. In an authoritative way, the CNG intends to put this social role before any demand from the professional category. Therefore, it has recently presented its political Manifesto, geared essentially to the good governance of the territory, to all the

Overview of Advanced Turbine Systems Program

NASA Astrophysics Data System (ADS)

Webb, H. A.; Bajura, R. A.

The US Department of Energy initiated a program to develop advanced gas turbine systems to serve both central power and industrial power generation markets. The Advanced Turbine Systems (ATS) Program will lead to commercial offerings by the private sector by 2002. ATS will be developed to fire natural gas but will be adaptable to coal and biomass firing. The systems will be: highly efficient (15 percent improvement over today's best systems); environmentally superior (10 percent reduction in nitrogen oxides over today's best systems); and cost competitive (10 percent reduction in cost of electricity). The ATS Program has five elements. Innovative cycle development will lead to the demonstration of systems with advanced gas turbine cycles using current gas turbine technology. High temperature development will lead to the increased firing temperatures needed to achieve ATS Program efficiency goals. Ceramic component development/demonstration will expand the current DOE/CE program to demonstrate industrial-scale turbines with ceramic components. Technology base will support the overall program by conducting research and development (R&D) on generic technology issues. Coal application studies will adapt technology developed in the ATS program to coal-fired systems being developed in other DOE programs.

Advanced Technology Training Program for the Apparel Industry. Final Report.

ERIC Educational Resources Information Center

El Paso Community Coll., TX.

A project developed rapid response, advanced technology courses that met the apparel market labor needs of the El Paso (Texas) community. Courses were designed for four options: computerized marker making and pattern grading, computerized front office systems, high technology machinery operation, and high technology machinery mechanics. The…

The Professional Transspective of the Students in the Conflicting Realities of the Post-Industrial Society

ERIC Educational Resources Information Center

Zinnatova, Mariya V.; Konovalova, Maria E.; Makarova, Nataliya V.

2016-01-01

The topicality of the issue under investigation is determined by the rising demand of the Russian society in the mastering and controlling conflicting realities that are capable of changing the integral notional structure of an individual, leading to the evolution or degradation of such individual's social and professional life activity. The…

Space Industrialization: Manufacturing and Construction Activities. Part 2.

ERIC Educational Resources Information Center

Story, Charles H.

1983-01-01

Discusses how space industrialization will provide direct benefits for our nation and will transfer technology to the many diverse areas of human activity. Examples are the development of the Space Shuttle, the Space Studies Institute, and the LS Society (advocates for colonizing space). (NRJ)

Nanotechnology and the Nanodermatology Society.

PubMed

Nasir, Adnan; Friedman, Adam

2010-07-01

Nanotechnology is a rapidly developing discipline with enormous promise for consumers and patients. Currently, it is entering an inflection point in its growth phase--both in the number and diversity of products developed or soon to be available for society and medicine. It is no surprise that a vast number of patents have been issued for nanotechnology in the cosmetics arena as a means of enhancing topical delivery of a broad range of over-the-counter products. In fact, the skin is the first point of contact for a whole host of nanomaterials, ranging from topical preparations, articles of clothing and household products, to sporting goods and industrial manufactured goods. Very little is known about the safety aspects of the nano-engineered materials that are being released in the environment, as well as those in consumer and healthcare products.

FOREWORD: Focus on Advanced Ceramics Focus on Advanced Ceramics

NASA Astrophysics Data System (ADS)

Ohashi, Naoki

2011-06-01

Much research has been devoted recently to developing technologies for renewable energy and improving the efficiency of the processes and devices used in industry and everyday life. Efficient solutions have been found using novel materials such as platinum and palladium-based catalysts for car exhaust systems, samarium-cobalt and neodymium-iron-boron permanent magnets for electrical motors, and so on. However, their realization has resulted in an increasing demand for rare elements and in their deficit, the development of new materials based on more abundant elements and new functionalities of traditional materials. Moreover, increasing environmental and health concerns demand substitution of toxic or hazardous substances with nature-friendly alternatives. In this context, this focus issue on advanced ceramics aims to review current trends in ceramics science and technology. It is related to the International Conference on Science and Technology of Advanced Ceramics (STAC) held annually to discuss the emerging issues in the field of ceramics. An important direction of ceramic science is the collaboration between experimental and theoretical sciences. Recent developments in density functional theory and computer technology have enabled the prediction of physical and chemical properties of ceramics, thereby assisting the design of new materials. Therefore, this focus issue includes articles devoted to theory and advanced characterization techniques. As mentioned above, the potential shortage of rare elements is becoming critical to the industry and has resulted in a Japanese government initiative called the 'Ubiquitous Element Strategy'. This focus issue also includes articles related to this strategy and to the associated topics of energy conversion, such as phosphors for high-efficiency lighting and photocatalysts for solar-energy harvesting. We hope that this focus issue will provide a timely overview of current trends and problems in ceramics science and

Integrated Imaging and Vision Techniques for Industrial Inspection: A Special Issue on Machine Vision and Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Zheng; Ukida, H.; Ramuhalli, Pradeep

2010-06-05

Imaging- and vision-based techniques play an important role in industrial inspection. The sophistication of the techniques assures high- quality performance of the manufacturing process through precise positioning, online monitoring, and real-time classification. Advanced systems incorporating multiple imaging and/or vision modalities provide robust solutions to complex situations and problems in industrial applications. A diverse range of industries, including aerospace, automotive, electronics, pharmaceutical, biomedical, semiconductor, and food/beverage, etc., have benefited from recent advances in multi-modal imaging, data fusion, and computer vision technologies. Many of the open problems in this context are in the general area of image analysis methodologies (preferably in anmore » automated fashion). This editorial article introduces a special issue of this journal highlighting recent advances and demonstrating the successful applications of integrated imaging and vision technologies in industrial inspection.« less

Advances in multi-scale modeling of solidification and casting processes

NASA Astrophysics Data System (ADS)

Liu, Baicheng; Xu, Qingyan; Jing, Tao; Shen, Houfa; Han, Zhiqiang

2011-04-01

The development of the aviation, energy and automobile industries requires an advanced integrated product/process R&D systems which could optimize the product and the process design as well. Integrated computational materials engineering (ICME) is a promising approach to fulfill this requirement and make the product and process development efficient, economic, and environmentally friendly. Advances in multi-scale modeling of solidification and casting processes, including mathematical models as well as engineering applications are presented in the paper. Dendrite morphology of magnesium and aluminum alloy of solidification process by using phase field and cellular automaton methods, mathematical models of segregation of large steel ingot, and microstructure models of unidirectionally solidified turbine blade casting are studied and discussed. In addition, some engineering case studies, including microstructure simulation of aluminum casting for automobile industry, segregation of large steel ingot for energy industry, and microstructure simulation of unidirectionally solidified turbine blade castings for aviation industry are discussed.

Advances in Thermal Spray Coatings for Gas Turbines and Energy Generation: A Review

NASA Astrophysics Data System (ADS)

Hardwicke, Canan U.; Lau, Yuk-Chiu

2013-06-01

Functional coatings are widely used in energy generation equipment in industries such as renewables, oil and gas, propulsion engines, and gas turbines. Intelligent thermal spray processing is vital in many of these areas for efficient manufacturing. Advanced thermal spray coating applications include thermal management, wear, oxidation, corrosion resistance, sealing systems, vibration and sound absorbance, and component repair. This paper reviews the current status of materials, equipment, processing, and properties' aspects for key coatings in the energy industry, especially the developments in large-scale gas turbines. In addition to the most recent industrial advances in thermal spray technologies, future technical needs are also highlighted.

Industrial bioprocesses: beyond routine applications of established methodologies.

PubMed

Junker, Beth

2010-04-15

The subject matter of manuscripts by industrial authors has primarily focused on elements with perceived commercial or regulatory significance. Once published, this information interacted and ultimately influenced manuscripts from authors of other affiliations, creating the rapid advancements that culminated in the current multi-billion dollar worldwide biotechnology industry. This paper discusses trends in "solely industrial" articles published in the specific journal of Biotechnology and Bioengineering over the past five decades of this journal's lifetime. "Solely industrial" articles were defined as papers in which all the authors were affiliated with industry. Data were gathered concerning "solely industrial" article distribution and frequency, authoring companies, subject classification, and category distribution. Selected articles and their impact were related to current and past technology milestones as well as associated challenges. Suggestions for areas of greater emphasis to influence the number and subject matter of "solely industrial" articles for the journal's sixth decade were offered for consideration.

Conventional and advanced time series estimation: application to the Australian and New Zealand Intensive Care Society (ANZICS) adult patient database, 1993-2006.

PubMed

Moran, John L; Solomon, Patricia J

2011-02-01

Time series analysis has seen limited application in the biomedical Literature. The utility of conventional and advanced time series estimators was explored for intensive care unit (ICU) outcome series. Monthly mean time series, 1993-2006, for hospital mortality, severity-of-illness score (APACHE III), ventilation fraction and patient type (medical and surgical), were generated from the Australia and New Zealand Intensive Care Society adult patient database. Analyses encompassed geographical seasonal mortality patterns, series structural time changes, mortality series volatility using autoregressive moving average and Generalized Autoregressive Conditional Heteroscedasticity models in which predicted variances are updated adaptively, and bivariate and multivariate (vector error correction models) cointegrating relationships between series. The mortality series exhibited marked seasonality, declining mortality trend and substantial autocorrelation beyond 24 lags. Mortality increased in winter months (July-August); the medical series featured annual cycling, whereas the surgical demonstrated long and short (3-4 months) cycling. Series structural breaks were apparent in January 1995 and December 2002. The covariance stationary first-differenced mortality series was consistent with a seasonal autoregressive moving average process; the observed conditional-variance volatility (1993-1995) and residual Autoregressive Conditional Heteroscedasticity effects entailed a Generalized Autoregressive Conditional Heteroscedasticity model, preferred by information criterion and mean model forecast performance. Bivariate cointegration, indicating long-term equilibrium relationships, was established between mortality and severity-of-illness scores at the database level and for categories of ICUs. Multivariate cointegration was demonstrated for {log APACHE III score, log ICU length of stay, ICU mortality and ventilation fraction}. A system approach to understanding series time

Advances in 3-dimensional braiding

NASA Technical Reports Server (NTRS)

Thaxton, Cirrelia; Reid, Rona; El-Shiekh, Aly

1992-01-01

This paper encompasses an overview of the history of 3-D braiding and an in-depth survey of the most recent, technological advances in machine design and implementation. Its purpose is to review the major efforts of university and industry research and development into the successful machining of this textile process.

Skills Conversion Project: Chapter 3, Food Products and Food Services Industry. Final Report.

ERIC Educational Resources Information Center

National Society of Professional Engineers, Washington, DC.