Science.gov

Sample records for advanced metallics branch

  1. Overview of the Advanced High Frequency Branch

    NASA Technical Reports Server (NTRS)

    Miranda, Felix A.

    2015-01-01

    This presentation provides an overview of the competencies, selected areas of research and technology development activities, and current external collaborative efforts of the NASA Glenn Research Center's Advanced High Frequency Branch.

  2. Metallization of branched DNA origami for nanoelectronic circuit fabrication.

    PubMed

    Liu, Jianfei; Geng, Yanli; Pound, Elisabeth; Gyawali, Shailendra; Ashton, Jeffrey R; Hickey, John; Woolley, Adam T; Harb, John N

    2011-03-22

    This work examines the metallization of folded DNA, known as DNA origami, as an enabling step toward the use of such DNA as templates for nanoelectronic circuits. DNA origami, a simple and robust method for creating a wide variety of shapes and patterns, makes possible the increased complexity and flexibility needed for both the design and assembly of useful circuit templates. In addition, selective metallization of the DNA template is essential for circuit fabrication. Metallization of DNA origami presents several challenges over and above those associated with the metallization of other DNA templates such as λ-DNA. These challenges include (1) the stability of the origami in the processes used for metallization, (2) the enhanced selectivity required to metallize small origami structures, (3) the increased difficulty of adhering small structures to the surface so that they will not be removed when subject to multiple metallization steps, and (4) the influence of excess staple strands present with the origami. This paper describes our efforts to understand and address these challenges. Specifically, the influence of experimental conditions on template stability and on the selectivity of metal deposition was investigated for small DNA origami templates. These templates were seeded with Ag and then plated with Au via an electroless deposition process. Both staple strand concentration and the concentration of ions in solution were found to have a significant impact. Selective continuous metal deposition was achieved, with an average metallized height as small as 32 nm. The shape of branched origami was also retained after metallization. These results represent important progress toward the realization of DNA-templated nanocircuits.

  3. Metallic fuels for advanced reactors

    NASA Astrophysics Data System (ADS)

    Carmack, W. J.; Porter, D. L.; Chang, Y. I.; Hayes, S. L.; Meyer, M. K.; Burkes, D. E.; Lee, C. B.; Mizuno, T.; Delage, F.; Somers, J.

    2009-07-01

    In the framework of the Generation IV Sodium Fast Reactor Program, the Advanced Fuel Project has conducted an evaluation of the available fuel systems supporting future sodium cooled fast reactors. This paper presents an evaluation of metallic alloy fuels. Early US fast reactor developers originally favored metal alloy fuel due to its high fissile density and compatibility with sodium. The goal of fast reactor fuel development programs is to develop and qualify a nuclear fuel system that performs all of the functions of a conventional fast spectrum nuclear fuel while destroying recycled actinides. This will provide a mechanism for closure of the nuclear fuel cycle. Metal fuels are candidates for this application, based on documented performance of metallic fast reactor fuels and the early results of tests currently being conducted in US and international transmutation fuel development programs.

  4. Advanced Branching Control and Characterization of Inorganic Semiconducting Nanocrystals

    SciTech Connect

    Hughes, Steven Michael

    2007-01-01

    The ability to finely tune the size and shape of inorganic semiconducting nanocrystals is an area of great interest, as the more control one has, the more applications will be possible for their use. The first two basic shapes develped in nanocrystals were the sphere and the anistropic nanorod. the II_VI materials being used such as Cadmium Selenide (CdSe) and Cadmium Telluride (CdTe), exhibit polytypism, which allows them to form in either the hexagonally packed wurtzite or cubically packed zinc blende crystalline phase. The nanorods are wurtzite with the length of the rod growing along the c-axis. As this grows, stacking faults may form, which are layers of zinc blende in the otherwise wurtzite crystal. Using this polytypism, though, the first generation of branched crystals were developed in the form of the CdTe tetrapod. This is a nanocrystal that nucleates in the zincblend form, creating a tetrahedral core, on which four wurtzite arms are grown. This structure opened up the possibility of even more complex shapes and applications. This disseration investigates the advancement of branching control and further understanding the materials polytypism in the form of the stacking faults in nanorods.

  5. Synthesis of branched metal nanostructures with controlled architecture and composition

    NASA Astrophysics Data System (ADS)

    Ortiz, Nancy

    On account of their small size, metal nanoparticles are proven to be outstanding catalysts for numerous chemical transformations and represent promising platforms for applications in the fields of electronics, chemical sensing, medicine, and beyond. Many properties of metal nanoparticles are size-dependent and can be further manipulated through their shape and architecture (e.g., spherical vs. branched). Achieving morphology control of nanoparticles through solution-based techniques has proven challenging due to limited knowledge of morphology development in nanosyntheses. To overcome these complications, a systematic examination of the local ligand environment of metal precursors on nanostructure formation was undertaken to evaluate its contribution to nanoparticle nucleation rate and subsequent growth processes. Specifically, this thesis will provide evidence from ex situ studies---Transmission Electron Microscopy (TEM) and UV-visible spectroscopy (UV-Vis)---that support the hypothesis that strongly coordinated ligands delay burst-like nucleation to generate spherical metal nanoparticles and ligands with intermediate binding affinity regulate the gradual reduction of metal precursors to promote aggregated assembly of nanodendrites. These ex situ studies were coupled with a new in situ perspective, providing detailed understanding of metal precursor transformation, its direct relation to nanoparticle morphology development, and the ligand influence towards the formation of structurally complex metal nanostructures, using in situ synchrotron X-ray Diffraction (XRD) and Ultra Small-Angle X-ray Scattering (USAXS). The principles extracted from the study of monometallic nanostructure formation were also found to be generally applicable to the synthesis of bimetallic nanostructures, e.g., Pd-Pt architectures, with either core-shell or alloyed structures that were readily achieved by ligand selection. These outcomes provide a direct connection between fundamental

  6. Biogenic metals in advanced water treatment.

    PubMed

    Hennebel, Tom; De Gusseme, Bart; Boon, Nico; Verstraete, Willy

    2009-02-01

    Microorganisms can change the oxidation state of metals and concomitantly deposit metal oxides and zerovalent metals on or into their cells. The microbial mechanisms involved in these processes have been extensively studied in natural environments, and researchers have recently gained interest in the applications of microbe-metal interactions in biotechnology. Because of their specific characteristics, such as high specific surface areas and high catalytic reactivity, biogenic metals offer promising perspectives for the sorption and (bio)degradation of contaminants. In this review, the precipitation of biogenic manganese and iron species and the microbial reduction of precious metals, such as palladium, platinum, silver and gold, are discussed with specific attention to the application of these biogenic metals in innovative remediation technologies in advanced water treatment.

  7. Advances in Nanocarbon Metals: Process

    DTIC Science & Technology

    2015-03-01

    covetic production system was designed and built. This system addressed the 3 distinct reaction steps: 1) C dissolves in copper (Cu), where the...metal (Cu).  The applied current causes local heating where the electrodes enter the Cu melt.  C dissolves in Cu where the temperature is locally...oxygen (O). 3 4) Experimental test, using a high‐temperature microscope (laser scanning confocal microscopy), of the proposal that C dissolves from

  8. Detection of second-generation asymptotic giant branch stars in metal-poor globular clusters

    NASA Astrophysics Data System (ADS)

    García-Hernández, D. A.

    2017-03-01

    Multiple stellar populations are actually known to be present in Galactic globular clusters (GCs). The first generation (FG) displays a halo-like chemical pattern, while the second generation (SG) one is enriched in Al and Na (depleted in Mg and O).Both generations of stars are found at different evolutionary stages like the main-sequence turnoff, the subgiant branch, and the red giant branch (RGB), but the SG seems to be absent - especially in metal-poor ([Fe/H] < -1) GCs - in more evolved evolutionary stages such as the asymptotic giant branch (AGB) phase. This suggests that not all SG stars experience the AGB phase and that AGB-manqué stars may be quite common in metal-poor GCs, which represents a fundamental problem for the theories of GC formation and evolution and stellar evolution. Very recently, we have combined the H-band Al abundances obtained by the APOGEE survey with ground-based optical photometry, reporting the first detection of SG Al-rich AGB stars in several metal-poor GCs with different observational properties such as horizontal branch (HB) morphology, metallicity, and age. The APOGEE observations thus resolve the apparent problem for stellar evolution, supporting the existing horizontal branch star canonical models, and may help to discern the nature of the GC polluters.

  9. Crack Branching and Fracture Mirror Data of Glasses and Advanced Ceramics

    NASA Technical Reports Server (NTRS)

    Choi, Sung R.; Gyekenyesi, John P.

    1998-01-01

    The fracture mirror and crack branching constants were determined from three glasses and nine advanced ceramics tested under various loading and specimen configurations in an attempt to use the constants as a data base for fractography. The ratios of fracture mirror or crack branching constant to fracture toughness were found to be approximately two for most ceramic materials tested. A demonstration of how to use the two constants as a tool for verifying stress measurements was presented for silicon nitride disk specimens subjected to high-temperature, constant stress-rate biaxial flexure testing.

  10. Seasonal variation and enrichment of metals in sediments of Rosetta branch, Nile River, Egypt.

    PubMed

    Redwan, Mostafa; Elhaddad, Engy

    2016-06-01

    This study investigated heavy metal pollution in sediments of the Rosetta branch of the River Nile of Egypt to quantify the toxic distribution potential of metals into the surrounding environment. Sediment samples were collected at 9 sites during in four seasons. Organic matter and total metal concentrations were determined using loss on ignition and inductively coupled plasma spectrometry, respectively. Principal component analysis has been applied to evaluate the metal sources and the relationships between metals in sediments. Metal concentrations showed the following order: winter > autumn > spring > summer. Mean concentrations of Cu, Zn, Cd, and Pb in sediments were above the average background value of metals in shale. Pb and Cd showed higher enrichment during all seasons at stations N3/N4, Zn at stations N1 to N4, and Cu at stations N6/N8. The variations in heavy metal total concentration and organic matter are due to different input sources, physico-chemical conditions, and adsorption/precipitation/redox conditions in sediments. Mean values of Geo-accumulation index (Igeo) for Fe, Mn, and Cu were below 0 which were classified as unpolluted during spring, summer, and autumn, except Cu increased from unpolluted to moderately polluted during winter. Igeo values for Cd, Pb, and Zn increased from unpolluted-moderately polluted to highly-very highly polluted during autumn and winter. Pollution Load Index was recorded in highest values during winter, especially at Fuwwah/Basioun and in lowest values during summer at after the Edfina Barrage/before Kafer El-Zayat due to industrial/human activities. Both natural and anthropogenic sources contributed to the metal accumulations in sediments, and industrial, agricultural, and municipal sewage effluents discharged from non-point sources may be the main anthropogenic sources for metals in the Rosetta branch.

  11. Resolved Stellar Halos of M87 and NGC 5128: Metallicities from the Red-Giant Branch

    NASA Astrophysics Data System (ADS)

    Bird, Sarah A.

    2016-08-01

    We have searched halo fields of two giant elliptical galaxies: M87, using HST images at 10 kpc from the galactic center, and NGC 5128 (Cen A), using VIMOS VLT images at 65 kpc from the center and archival HST data from 8 to 38 kpc from the center. We have resolved thousands of red-giant-branch (RGB) stars in these stellar halo fields using V and I filters, and, in addition, measured the metallicity using stellar isochrones. The metallicity distribution function (MDF) of the inner stellar halo of M87 is similar to that of NGC 5128's stellar halo.

  12. POPULATION EFFECTS ON THE METALLICITY DISTRIBUTION FUNCTION DERIVED FROM THE RED GIANT BRANCH

    SciTech Connect

    Ordoñez, Antonio J.; Sarajedini, Ata E-mail: ata@astro.ufl.edu

    2015-06-15

    We have tested the reliability of the red giant branch (RGB) as a metallicity indicator accounting for observational errors as well as the complexity of star formation histories and chemical evolution histories observed in various stellar systems. We generate model color–magnitude diagrams (CMDs) produced with a variety of evolutionary histories and compare the resultant metallicity estimates from the colors and magnitudes of RGB stars to the true input metallicities. We include realistic models for photometric errors and completeness in our synthetic CMDs. As expected, for simple simple stellar populations dominated by old stars, the RGB provides a very accurate estimate of the modular metallicity value for a population. An error in the age of a system targeted for this type of study may produce metallicity errors of a few tenths of a dex. The size of this metallicity error depends linearly on the age error, and we find this dependence to be stronger with more precise photometry. If the population has experienced any significant star formation within the last ∼6 Gyr, the metallicity estimates, [M/H], derived from the RGB may be in error by up to ∼0.5 dex. Perhaps the most important consideration for this technique is an accurate, independent estimate of the average age for the target stellar system, especially if it is probable that a significant fraction of the population formed less than ∼6 Gyr ago.

  13. A Spitzer survey of asymptotic giant branch stars: Dust production and mass loss at low metallicity

    NASA Astrophysics Data System (ADS)

    Boyer, Martha L.

    We conducted infrared (IR) surveys of ten Galactic globular clusters (GCs) and eight Local Group dwarf irregular galaxies using the Spitzer Space Telescope . The main objective of these surveys is to further the understanding of dust production in low metallicity environments akin to the early Universe. In GCs, we investigate the stars with IR excesses, attributed to dust, and the intracluster medium (ICM). The GC M15 is the most metal-poor Galactic GC, and is ideal for studying dust production at metallicity less than 1% solar. The most massive Galactic GC, o Centauri, harbors three distinct populations of differing metallicities, providing the opportunity to study dust production at three metallicities within the same environment. The large population of dusty Asymptotic Giant Branch (AGB) stars present in the eight observed Local Group dwarf galaxies allows a statistically significant study of dusty stellar mass loss at a broad range of metallicities (2%-19% solar). In all observed systems, we find large populations of dust enshrouded stars and, in some cases, dusty interstellar medium. The surplus of both interstellar dust and the dust producing stars in M15 is surprising, given its extremely low metal-content. No significant amount of ICM dust is detected in any other GC observed, suggesting that ICM dust does not survive long compared to its production rate and is thus a part of a stochastic process. In oCen, we see no difference in dust production between the three populations, and overall, we see that dust is not formed in larger quantities than seen in M15. In dwarf galaxies, we see that circumstellar dust is prolific enough to create at least a small population of completely optically obscured AGB stars in each galaxy, regardless of the galaxy's metallicity, but higher metallicity galaxies tend to harbor more stars with slight IR excesses. These results suggest that dust production is not prohibited at very low metallicity, although it may be produced in

  14. Development of Damped Metal Matrix Composites for Advanced Structural Applications

    DTIC Science & Technology

    1990-04-01

    DTIP FiLE COPY Applied Research Laboratory (Dto 00 CD Technical Report NO DEVELOPMENT OF DAMPED METAL MATRIX COMPOSITES FOR ADVANCED STRUCTURAL...DEVELOPMENT OF DAMPED METAL MATRIX COMPOSITES FOR ADVANCED STRUCTURAL APPLICATIONS by Clark A. Updike Ram B. Bhagat Technical Report No. TR 90-004 April 1990... Metal Matrix Composites for Advanced Structural Applications 12 PERSONAL AUTHOR(S) C.A. Updike, R. Bhagat 1 3a TYPE OF REPORT 13b TIME COVERED 14. DATE

  15. Advanced Metals (Industrial Arts) Curriculum Guide. Bulletin 1750.

    ERIC Educational Resources Information Center

    Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

    This curriculum guide contains materials for a 13-unit course in advanced metals, the second metals course in the industrial arts curriculum for grades 10-12. It is intended for use by industrial arts teachers, supervisors, counselors, administrators, and teacher educators. A two-page course overview provides a brief course description; indicates…

  16. Advances and challenges in the treatment of branched-chain amino/keto acid metabolic defects

    PubMed Central

    Weinhold, Natalie; Vockley, Jerry; Gibson, K. Michael

    2014-01-01

    Summary Disorders of branched-chain amino/keto acid metabolism encompass diverse entities, including maple syrup urine disease (MSUD), the ‘classical’ organic acidurias isovaleric acidemia (IVA), propionic acidemia (PA), methylmalonic acidemia (MMA) and, among others, rarely described disorders such as 2-methylbutyryl-CoA dehydrogenase deficiency (MBDD) or isobutyryl-CoA dehydrogenase deficiency (IBDD). Our focus in this review is to highlight the biochemical basis underlying recent advances and ongoing challenges of long-term conservative therapy including precursor/protein restriction, replenishment of deficient substrates, and the use of antioxidants and anaplerotic agents which refill the Krebs cycle. Ongoing clinical assessments of affected individuals in conjunction with monitoring of disease-specific biochemical parameters remain essential. It is likely that mass spectrometry-based ‘metabolomics’ may be a helpful tool in the future for studying complete biochemical profiles and diverse metabolic phenotypes. Prospective studies are needed to test the effectiveness of adjunct therapies such as antioxidants, ornithine-alpha-ketoglutarate (OKG) or creatine in addition to specialized diets and to optimize current therapeutic strategies in affected individuals. With the individual lifetime risk and degree of severity being unknown in asymptomatic individuals with MBDD or IBDD, instructions regarding risks for metabolic stress and fasting avoidance along with clinical monitoring are reasonable interventions at the current time. Overall, it is apparent that carefully designed prospective clinical investigations and multicenter cohort-controlled trials are needed in order to leverage that knowledge into significant breakthroughs in treatment strategies and appropriate approaches. PMID:21290185

  17. Binary Blue Metal-poor Stars: Evidence for Asymptotic Giant Branch Mass Transfer

    NASA Astrophysics Data System (ADS)

    Sneden, Christopher; Preston, George W.; Cowan, John J.

    2003-07-01

    We present new abundance analyses of six blue metal-poor (BMP) stars with very low iron abundances ([Fe/H]<-2), based on new high-resolution echelle spectra. Three are spectroscopic binaries, and three have constant radial velocities. The chemical compositions of these two groups are very different, as the binary BMP stars have large enhancements of carbon and neutron-capture elements that are products of s-process nucleosynthesis. One star, CS 29497-030, has an extreme enhancement of lead, [Pb/Fe]=+3.7, the largest abundance in any star yet discovered. It probably also has an oxygen overabundance compared to the other BMP stars of our sample. The binary BMP stars must have attained their status via mass transfer during the asymptotic giant branch (AGB) evolutions of their companion stars, which are now unseen and most likely are compact objects. We have not found any examples of AGB mass transfer among BMP binaries with [Fe/H]>-2.

  18. Thermal Applications for Advanced Metallic Materials (Preprint)

    DTIC Science & Technology

    2007-01-01

    layered metal oxides (NaCo2O4 etc.) [25], Skutterudites (CeFeCoSb, etc.) [26] and the Half - Heusler alloys e.g. MNiSn, where M = Ti, Zr, Hf [27...Thermoelectrics. 1997, IEEE: Piscataway, NJ. p. 1-11. 27. Culp, S.R., et al., Effect of substitutions on the thermoelectric figure of merit of half - Heusler

  19. [Research advances in heavy metals pollution ecology of diatom].

    PubMed

    Ding, Teng-Da; Ni, Wan-Min; Zhang, Jian-Ying

    2012-03-01

    Diatom, due to its high sensitivity to environmental change, is one of the bio-indicators of aquatic ecosystem health, and some typical diatom species have been applied to indicate the heavy metals pollution of water body. With the focus on the surface water heavy metals pollution, this paper reviewed the research advances in the toxic effect of heavy metals pollution on diatom, biosorption and bioaccumulation of heavy metals by diatom, ecological adaptation mechanisms of diatom to heavy metals pollution, and roles of diatom as bio-indicator and in ecological restoration of heavy metals pollution. The growth tendency of diatom and the morphological change of frustule under heavy metals pollution as well as the differences in heavy metals biosorption and bioaccumulation by diatom, the ecological adaptation mechanisms of diatom on heavy metals surface complexation and ion exchange, and the roles of diatom as bio-indicator and in ecological restoration of heavy metals polluted water body were also discussed. This review could provide scientific evidences for the prevention of aquatic ecosystems heavy metals pollution and related early warning techniques.

  20. Advanced Organic Ligands for Protecting Metal Nanoparticles

    NASA Astrophysics Data System (ADS)

    Yu, Jonathan Ka-Wing

    Organic monolayer protected metal nanoparticles have been utilized in many different fields such as catalysis, drug delivery, and sensor chemistry. However, these nanomaterials are prone to increase in size consequently losing its function at the nanoscale. The stability these nanoparticles have been a great interest of research. This thesis focuses on the synthesis of a novel cross-linkable ligand for the protection of metal nanoparticles. Chapter 1 reviews key concepts of nanoparticles, its usefulness in applications, some of the stabilizing strategies employed, and the scope of the thesis project. Chapter 2 describes the synthetic attempts and optimization of the novel cross-linkable ligand. In addition, its characterization data is also included. Section 2.8 also highlights another fully synthesized novel hydrophobic ligand. Chapter 3 contains the summary of the work and closing remarks. Future works is also included to describe the prospects of the synthesis of the novel ligand. Chapter 4 entails the experimental data and supplementary information.

  1. Advances in Nanocarbon Metals: Fine Structure

    DTIC Science & Technology

    2015-03-01

    SUPPLEMENTARY NOTES 14. ABSTRACT This study is an investigation of the structure and some properties of silver, copper, and aluminum alloy covetics...Covetics can incorporate large amounts of carbon (C) in a nanoscale form to alter physical and mechanical properties of the base metal or alloy ...and properties can be obtained. 15. SUBJECT TERMS covetic, nanocarbon silver, aluminum , copper 16. SECURITY CLASSIFICATION OF: 17. LIMITATION

  2. Advanced atom chips with two metal layers.

    SciTech Connect

    Stevens, James E.; Blain, Matthew Glenn; Benito, Francisco M.; Biedermann, Grant

    2010-12-01

    A design concept, device layout, and monolithic microfabrication processing sequence have been developed for a dual-metal layer atom chip for next-generation positional control of ultracold ensembles of trapped atoms. Atom chips are intriguing systems for precision metrology and quantum information that use ultracold atoms on microfabricated chips. Using magnetic fields generated by current carrying wires, atoms are confined via the Zeeman effect and controllably positioned near optical resonators. Current state-of-the-art atom chips are single-layer or hybrid-integrated multilayer devices with limited flexibility and repeatability. An attractive feature of multi-level metallization is the ability to construct more complicated conductor patterns and thereby realize the complex magnetic potentials necessary for the more precise spatial and temporal control of atoms that is required. Here, we have designed a true, monolithically integrated, planarized, multi-metal-layer atom chip for demonstrating crossed-wire conductor patterns that trap and controllably transport atoms across the chip surface to targets of interest.

  3. Advanced Metallic Thermal Protection System Development

    NASA Technical Reports Server (NTRS)

    Blosser, M. L.; Chen, R. R.; Schmidt, I. H.; Dorsey, J. T.; Poteet, C. C.; Bird, R. K.

    2002-01-01

    A new Adaptable, Robust, Metallic, Operable, Reusable (ARMOR) thermal protection system (TPS) concept has been designed, analyzed, and fabricated. In addition to the inherent tailorable robustness of metallic TPS, ARMOR TPS offers improved features based on lessons learned from previous metallic TPS development efforts. A specific location on a single-stage-to-orbit reusable launch vehicle was selected to develop loads and requirements needed to design prototype ARMOR TPS panels. The design loads include ascent and entry heating rate histories, pressures, acoustics, and accelerations. Additional TPS design issues were identified and discussed. An iterative sizing procedure was used to size the ARMOR TPS panels for thermal and structural loads as part of an integrated TPS/cryogenic tank structural wall. The TPS panels were sized to maintain acceptable temperatures on the underlying structure and to operate under the design structural loading. Detailed creep analyses were also performed on critical components of the ARMOR TPS panels. A lightweight, thermally compliant TPS support system (TPSS) was designed to connect the TPS to the cryogenic tank structure. Four 18-inch-square ARMOR TPS panels were fabricated. Details of the fabrication process are presented. Details of the TPSS for connecting the ARMOR TPS panels to the externally stiffened cryogenic tank structure are also described. Test plans for the fabricated hardware are presented.

  4. Metal hydride hydrogen compression: Recent advances and future prospects

    DOE PAGES

    Bowman, Jr., Robert C.; Yartys, Volodymyr A.; Lototskyy, Mykhaylo V.; ...

    2016-03-17

    Metal hydride (MH) thermal sorption compression is one of the more important applications of the metal hydrides. The present paper reviews recent advances in the field based on the analysis of the fundamental principles of this technology. The performances when boosting hydrogen pressure, along with two- and three-step compression units are analyzed. The paper includes also a theoretical modeling of a two-stage compressor aimed at both describing the performance of the experimentally studied systems, but, also, on their optimization and design of more advanced MH compressors. Business developments in the field are reviewed for the Norwegian company HYSTORSYS AS andmore » the South African Institute for Advanced Materials Chemistry. Finally, future prospects are outlined presenting the role of the metal hydride compression in the overall development of the hydrogen driven energy systems. Lastly, the work is based on the analysis of the development of the technology in Europe, USA and South Africa.« less

  5. Metal hydride hydrogen compression: Recent advances and future prospects

    SciTech Connect

    Bowman, Jr., Robert C.; Yartys, Volodymyr A.; Lototskyy, Mykhaylo V.; Linkov, Vladimir; Grant, David; Stuart, Alastair; Eriksen, Jon; Denys, Roman

    2016-03-17

    Metal hydride (MH) thermal sorption compression is one of the more important applications of the metal hydrides. The present paper reviews recent advances in the field based on the analysis of the fundamental principles of this technology. The performances when boosting hydrogen pressure, along with two- and three-step compression units are analyzed. The paper includes also a theoretical modeling of a two-stage compressor aimed at both describing the performance of the experimentally studied systems, but, also, on their optimization and design of more advanced MH compressors. Business developments in the field are reviewed for the Norwegian company HYSTORSYS AS and the South African Institute for Advanced Materials Chemistry. Finally, future prospects are outlined presenting the role of the metal hydride compression in the overall development of the hydrogen driven energy systems. Lastly, the work is based on the analysis of the development of the technology in Europe, USA and South Africa.

  6. Evolution and nucleosynthesis of asymptotic giant branch stellar models of low metallicity

    SciTech Connect

    Fishlock, Cherie K.; Karakas, Amanda I.; Yong, David; Lugaro, Maria E-mail: amanda.karakas@anu.edu.au E-mail: maria.lugaro@monash.edu

    2014-12-10

    We present stellar evolutionary tracks and nucleosynthetic predictions for a grid of stellar models of low- and intermediate-mass asymptotic giant branch (AGB) stars at Z = 0.001 ([Fe/H] =–1.2). The models cover an initial mass range from 1 M {sub ☉} to 7 M {sub ☉}. Final surface abundances and stellar yields are calculated for all elements from hydrogen to bismuth as well as isotopes up to the iron group. We present the first study of neutron-capture nucleosynthesis in intermediate-mass AGB models, including a super-AGB model, of [Fe/H] = –1.2. We examine in detail a low-mass AGB model of 2 M {sub ☉} where the {sup 13}C(α,n){sup 16}O reaction is the main source of neutrons. We also examine an intermediate-mass AGB model of 5 M {sub ☉} where intershell temperatures are high enough to activate the {sup 22}Ne neutron source, which produces high neutron densities up to ∼10{sup 14} n cm{sup –3}. Hot bottom burning is activated in models with M ≥ 3 M {sub ☉}. With the 3 M {sub ☉} model, we investigate the effect of varying the extent in mass of the region where protons are mixed from the envelope into the intershell at the deepest extent of each third dredge-up. We compare the results of the low-mass models to three post-AGB stars with a metallicity of [Fe/H] ≅ – 1.2. The composition is a good match to the predicted neutron-capture abundances except for Pb and we confirm that the observed Pb abundances are lower than what is calculated by AGB models.

  7. Clear Evidence for the Presence of Second-generation Asymptotic Giant Branch Stars in Metal-poor Galactic Globular Clusters

    NASA Astrophysics Data System (ADS)

    García-Hernández, D. A.; Mészáros, Sz.; Monelli, M.; Cassisi, S.; Stetson, P. B.; Zamora, O.; Shetrone, M.; Lucatello, S.

    2015-12-01

    Galactic globular clusters (GCs) are known to host multiple stellar populations: a first generation (FG) with a chemical pattern typical of halo field stars and a second generation (SG) enriched in Na and Al and depleted in O and Mg. Both stellar generations are found at different evolutionary stages (e.g., the main-sequence turnoff, the subgiant branch, and the red giant branch (RGB)). The non detection of SG asymptotic giant branch (AGB) stars in several metal-poor ([Fe/H] < -1) GCs suggests that not all SG stars ascend the AGB phase, and that failed AGB stars may be very common in metal-poor GCs. This observation represents a serious problem for stellar evolution and GC formation/evolution theories. We report fourteen SG-AGB stars in four metal-poor GCs (M13, M5, M3, and M2) with different observational properties: horizontal branch (HB) morphology, metallicity, and age. By combining the H-band Al abundances obtained by the Apache Point Observatory Galactic Evolution Experiment survey with ground-based optical photometry, we identify SG Al-rich AGB stars in these four GCs and show that Al-rich RGB/AGB GC stars should be Na-rich. Our observations provide strong support for present, standard stellar models, i.e., without including a strong mass-loss efficiency, for low-mass HB stars. In fact, current empirical evidence is in agreement with the predicted distribution of FG and SG stars during the He-burning stages based on these standard stellar models.

  8. Metallic fuels: The EBR-II legacy and recent advances

    SciTech Connect

    Douglas L. Porter; Steven L. Hayes; J. Rory Kennedy

    2012-09-01

    Experimental Breeder Reactor – II (EBR-II) metallic fuel was qualified for high burnup to approximately 10 atomic per cent. Subsequently, the electrometallurgical treatment of this fuel was demonstrated. Advanced metallic fuels are now investigated for increased performance, including ultra-high burnup and actinide burning. Advances include additives to mitigate the fuel/cladding chemical interaction and uranium alloys that combine Mo, Ti and Zr to improve alloy performance. The impacts of the advances—on fabrication, waste streams, electrorefining, etc.—are found to be minimal and beneficial. Owing to extensive research literature and computational methods, only a modest effort is required to complete their development.

  9. Advanced metal-membrane technology-commercialization

    SciTech Connect

    Edlund, D.J.

    1995-06-01

    The gasification of coal offers a potentially significant source of hydrogen for use in clean power generation and as a primary chemical feedstock. However, hydrogen derived from coal continues to be more expensive than hydrogen derived from natural gas or petroleum, due in large part to the expense of separating hydrogen from the mixture of gases produced during gasification. At Bend Research, we have been developing a novel hydrogen-permeable metal membrane that promises to be economical for hydrogen separation and purification, including the purification of hydrogen derived from gasifying coal. Furthermore, the membrane is ideally suited for use at high temperatures (200{degrees} to 500{degrees}C), making it feasible to produce pure hydrogen directly from hot gas streams. Through a partnership with Teledyne Wah Chang, we are proceeding with scale-up of prototype membrane modules and field tests to demonstrate the technology to potential users. Additionally, we are working with potential customers to estimate capital savings and operating costs for integrated systems. In this paper, we present some of the operating characteristics of the metal membrane, including its use to drive equilibrium-limited reactions toward complete conversion (e.g., the water-gas-shift reaction). We also describe our activities for commercializing this technology for a variety of applications.

  10. Aeroheating model advancements featuring electroless metallic plating

    NASA Technical Reports Server (NTRS)

    Stalmach, C. J., Jr.; Goodrich, W. D.

    1976-01-01

    Discussed are advancements in wind tunnel model construction methods and hypersonic test data demonstrating the methods. The general objective was to develop model fabrication methods for improved heat transfer measuring capability at less model cost. A plated slab model approach was evaluated with cast models containing constantan wires that formed single-wire-to-plate surface thermocouple junctions with a seamless skin of electroless nickel alloy. The surface of a space shuttle orbiter model was selectively plated with scaled tiles to simulate, with high fidelity, the probable misalignments of the heatshield tiles on a flight vehicle. Initial, Mach 8 heating results indicated a minor effect of tile misalignment roughness on boundary layer transition, implying a possible relaxation of heatshield manufacturing tolerances. Some loss of the plated tiles was experienced when the model was tested at high heating rates.

  11. Advanced optical interference filters based on metal and dielectric layers.

    PubMed

    Begou, Thomas; Lemarchand, Fabien; Lumeau, Julien

    2016-09-05

    In this paper, we investigate the design and the fabrication of an advanced optical interference filter based on metal and dielectric layers. This filter respects the specifications of the 2016 OIC manufacturing problem contest. We study and present all the challenges and solutions that allowed achieving a low deviation between the fabricated prototype and the target.

  12. Risk of advanced heart block during extradural anaesthesia in patients with right bundle branch block and left anterior hemiblock.

    PubMed

    Coriat, P; Harari, A; Ducardonet, A; Tarot, J P; Viars, P

    1981-05-01

    Electrocardiographic recording by Holter monitoring demonstrated the absence of any modification, however minimal, of the intranodal conduction during surgical procedures under extradural anaesthesia in 20 patients with right bundle branch block (RBBB) and left anterior hemiblock (LAHB) but without symptoms. These data suggest that extradural anaesthesia can be used safely in patients with asymptomatic chronic RBBB and LAHB without prophylactic insertion of pacemakers. However, patients having experienced either syncope or transient Mobitz II second degree AV block are likely to have a trifascicular block and increased risk of advanced heart block during extradural anaesthesia.

  13. Advanced metallic thermal protection systems for reusable launch vehicles

    NASA Astrophysics Data System (ADS)

    Blosser, Max Leon

    2000-10-01

    Metallic thermal protection systems are a key technology that may help achieve the goal of reducing the cost of space access. A study was performed to develop an understanding of the key factors that govern the performance of metallic thermal protection systems for reusable launch vehicles. Multi-disciplinary background information was assembled and reviewed critically to provide a basis for development of improved metallic thermal protection systems. The fundamentals of aerodynamic heating were reviewed and applied to the development of thermal protection systems. General approaches to thermal protection were categorized and critiqued. The high temperature materials used for thermal protection systems (TPS), including insulations, structural materials, and coatings were reviewed. The history of metallic TPS from early pre-Shuttle concepts to current concepts for a reusable launch vehicle was reviewed for the first time. A current advanced metallic TPS concept was presented and systematically analyzed to discover the most important factors governing the thermal performance of metallic TPS. A large number of relevant factors that influence the thermal analysis and thermal performance of metallic TPS were identified and quantified. Detailed finite element computational models were developed for predicting the thermal performance of variations of the advanced metallic TPS concept mounted on a simple, unstiffened structure. The computational models were also used, in an automated iterative procedure, for sizing the metallic TPS to maintain the structure below a specified temperature limit. A statistical sensitivity analysis method, based on orthogonal matrix techniques used in robust design, was used to quantify and rank the relative importance of the various modeling and design factors considered in this study. Results from this study identify factors that have the most potential to improve metallic TPS performance. The thermal properties of the underlying vehicle

  14. Fine root branch orders contribute differentially to uptake, allocation, and return of potentially toxic metals.

    PubMed

    Guo, Ying-Ying; Wang, Jun-Jian; Kong, De-Liang; Wang, Wei; Guo, Da-Li; Wang, Yan-Bing; Xie, Qing-Long; Liu, Yang-Sheng; Zeng, Hui

    2013-10-15

    Growing evidence has revealed high heterogeneity of fine root networks in both structure and function, with different root orders corporately maintaining trees' physiological activities. However, little information is available on how fine root heterogeneity of trees responds to environmental stresses. We examined concentrations of seven potentially toxic metals (Cr, Ni, Cu, Zn, As, Cd, and Pb) within fine root networks and their correlations with root morphological and macro-elemental traits in six Chinese subtropical trees. The contributions of different orders of roots to fine-root metal storage and return were also estimated. Results showed no consistent pattern for the correlation among different metal concentration against root traits. Unlike root metal concentration that generally decreased with root order, root metal storage was commonly lowest in middle root orders. Root senescence was at least comparable to leaf senescence contributing to metal removal. Although the first-order roots constituted 7.2-22.3% of total fine root biomass, they disproportionately contributed to most of metal return fluxes via root senescence. The two distinct root functional modules contributed differentially to metal uptake, allocation, and return, with defensive (lower-order) roots effectively stabilizing and removing toxic metals and bulk buffering (higher-order) roots possessing a persistent but diluted metal pool. Our results suggest a strong association of physiological functions of metal detoxification and metal homeostasis with the structural heterogeneity in fine root architecture.

  15. Highly branched and loop-rich gels via formation of metal-organic cages linked by polymers.

    PubMed

    Zhukhovitskiy, Aleksandr V; Zhong, Mingjiang; Keeler, Eric G; Michaelis, Vladimir K; Sun, Jessie E P; Hore, Michael J A; Pochan, Darrin J; Griffin, Robert G; Willard, Adam P; Johnson, Jeremiah A

    2016-01-01

    Gels formed via metal-ligand coordination typically have very low branch functionality, f, as they consist of ∼2-3 polymer chains linked to single metal ions that serve as junctions. Thus, these materials are very soft and unable to withstand network defects such as dangling ends and loops. We report here a new class of gels assembled from polymeric ligands and metal-organic cages (MOCs) as junctions. The resulting 'polyMOC' gels are precisely tunable and may feature increased branch functionality. We show two examples of such polyMOCs: a gel with a low f based on a M2L4 paddlewheel cluster junction and a compositionally isomeric one of higher f based on a M12L24 cage. The latter features large shear moduli, but also a very large number of elastically inactive loop defects that we subsequently exchanged for functional ligands, with no impact on the gel's shear modulus. Such a ligand substitution is not possible in gels of low f, including the M2L4-based polyMOC.

  16. Mass-loss on the red giant branch: the value and metallicity dependence of Reimers' η in globular clusters

    NASA Astrophysics Data System (ADS)

    McDonald, I.; Zijlstra, A. A.

    2015-03-01

    The impact of metallicity on the mass-loss rate from red giant branch (RGB) stars is studied through its effect on the parameters of horizontal branch (HB) stars. The scaling factors from Reimers and Schröder and Cuntz are used to measure the efficiency of RGB mass-loss for typical stars in 56 well-studied Galactic globular clusters (GCs). The median values among clusters are, respectively, η _R = 0.477 ± 0.070 ^{+0.050}_{-0.062} and η _SC = 0.172 ± 0.024 ^{+0.018}_{-0.023} (standard deviation and systematic uncertainties, respectively). Over a factor of 200 in iron abundance, η varies by ≲30 per cent, thus mass-loss mechanisms on the RGB have very little metallicity dependence. Any remaining dependence is within the current systematic uncertainties on cluster ages and evolution models. The low standard deviation of η among clusters (≈14 per cent) contrasts with the variety of HB morphologies. Since η incorporates cluster age, this suggests that age accounts for the majority of the `second parameter problem', and that a Reimers-like law provides a good mass-loss model. The remaining spread in η correlates with cluster mass and density, suggesting helium enrichment provides the third parameter explaining HB morphology of GCs. We close by discussing asymptotic giant branch (AGB) mass-loss, finding that the AGB tip luminosity is better reproduced and η has less metallicity dependence if GCs are more co-eval than generally thought.

  17. Recent Advances in Transition Metal-Catalyzed Glycosylation.

    PubMed

    McKay, Matthew J; Nguyen, Hien M

    2012-08-03

    Having access to mild and operationally simple techniques for attaining carbohydrate targets will be necessary to facilitate advancement in biological, medicinal, and pharmacological research. Even with the abundance of elegant reports for generating glycosidic linkages, stereoselective construction of α- and β-oligosaccharides and glycoconjugates is by no means trivial. In an era where expanded awareness of the impact we are having on the environment drives the state-of-the-art, synthetic chemists are tasked with developing cleaner and more efficient reactions for achieving their transformations. This movement imparts the value that prevention of waste is always superior to its treatment or cleanup. This review will highlight recent advancement in this regard by examining strategies that employ transition metal catalysis in the synthesis of oligosaccharides and glycoconjugates. These methods are mild and effective for constructing glycosidic bonds with reduced levels of waste through utilization of sub-stoichiometric amounts of transition metals to promote the glycosylation.

  18. Recent Advances in Transition Metal-Catalyzed Glycosylation

    PubMed Central

    McKay, Matthew J.; Nguyen, Hien M.

    2012-01-01

    Having access to mild and operationally simple techniques for attaining carbohydrate targets will be necessary to facilitate advancement in biological, medicinal, and pharmacological research. Even with the abundance of elegant reports for generating glycosidic linkages, stereoselective construction of α- and β-oligosaccharides and glycoconjugates is by no means trivial. In an era where expanded awareness of the impact we are having on the environment drives the state-of-the-art, synthetic chemists are tasked with developing cleaner and more efficient reactions for achieving their transformations. This movement imparts the value that prevention of waste is always superior to its treatment or cleanup. This review will highlight recent advancement in this regard by examining strategies that employ transition metal catalysis in the synthesis of oligosaccharides and glycoconjugates. These methods are mild and effective for constructing glycosidic bonds with reduced levels of waste through utilization of sub-stoichiometric amounts of transition metals to promote the glycosylation. PMID:22924154

  19. Environment assisted degradation mechanisms in advanced light metals

    NASA Technical Reports Server (NTRS)

    Gangloff, R. P.; Stoner, G. E.; Swanson, R. E.

    1989-01-01

    A multifaceted research program on the performance of advanced light metallic alloys in aggressive aerospace environments, and associated environmental failure mechanisms was initiated. The general goal is to characterize alloy behavior quantitatively and to develop predictive mechanisms for environmental failure modes. Successes in this regard will provide the basis for metallurgical optimization of alloy performance, for chemical control of aggressive environments, and for engineering life prediction with damage tolerance and long term reliability.

  20. Metal fire implications for advanced reactors. Part 1, literature review.

    SciTech Connect

    Nowlen, Steven Patrick; Radel, Ross F.; Hewson, John C.; Olivier, Tara Jean; Blanchat, Thomas K.

    2007-10-01

    Public safety and acceptance is extremely important for the nuclear power renaissance to get started. The Advanced Burner Reactor and other potential designs utilize liquid sodium as a primary coolant which provides distinct challenges to the nuclear power industry. Fire is a dominant contributor to total nuclear plant risk events for current generation nuclear power plants. Utilizing past experience to develop suitable safety systems and procedures will minimize the chance of sodium leaks and the associated consequences in the next generation. An advanced understanding of metal fire behavior in regards to the new designs will benefit both science and industry. This report presents an extensive literature review that captures past experiences, new advanced reactor designs, and the current state-of-knowledge related to liquid sodium combustion behavior.

  1. Development of Metal Matrix Composites for NASA'S Advanced Propulsion Systems

    NASA Technical Reports Server (NTRS)

    Lee, Jonathan A.

    2000-01-01

    The state-of-the-art development of several aluminum and copper based Metal Matrix Composites (MMC) for NASA's advanced propulsion systems will be presented. The presentation's goal is to provide an overview of NASA-Marshall Space Flight Center's planned and on-going activities in MMC for advanced liquid rocket engines such as the X-33 vehicle's Aerospike and X-34 Fastrac engine. The focus will be on lightweight and environmental compatibility with oxygen and hydrogen of key MMC materials, within each NASA's new propulsion application, that will provide a high payoff for NASA's reusable launch vehicle systems and space access vehicles. Advanced MMC processing techniques such as plasma spray, centrifugal casting, pressure infiltration casting will be discussed. Development of a novel 3D printing method for low cost production of composite preform, and functional gradient MMC to enhanced rocket engine's dimensional stability will be presented.

  2. Metal hydride hydrogen compression: recent advances and future prospects

    NASA Astrophysics Data System (ADS)

    Yartys, Volodymyr A.; Lototskyy, Mykhaylo; Linkov, Vladimir; Grant, David; Stuart, Alastair; Eriksen, Jon; Denys, Roman; Bowman, Robert C.

    2016-04-01

    Metal hydride (MH) thermal sorption compression is one of the more important applications of the MHs. The present paper reviews recent advances in the field based on the analysis of the fundamental principles of this technology. The performances when boosting hydrogen pressure, along with two- and three-step compression units, are analyzed. The paper includes also a theoretical modelling of a two-stage compressor aimed at describing the performance of the experimentally studied systems, their optimization and design of more advanced MH compressors. Business developments in the field are reviewed for the Norwegian company HYSTORSYS AS and the South African Institute for Advanced Materials Chemistry. Finally, future prospects are outlined presenting the role of the MH compression in the overall development of the hydrogen-driven energy systems. The work is based on the analysis of the development of the technology in Europe, USA and South Africa.

  3. Current advances in precious metal core–shell catalyst design

    PubMed Central

    Wang, Xiaohong; He, Beibei; Hu, Zhiyu; Zeng, Zhigang; Han, Sheng

    2014-01-01

    Precious metal nanoparticles are commonly used as the main active components of various catalysts. Given their high cost, limited quantity, and easy loss of catalytic activity under severe conditions, precious metals should be used in catalysts at low volumes and be protected from damaging environments. Accordingly, reducing the amount of precious metals without compromising their catalytic performance is difficult, particularly under challenging conditions. As multifunctional materials, core–shell nanoparticles are highly important owing to their wide range of applications in chemistry, physics, biology, and environmental areas. Compared with their single-component counterparts and other composites, core–shell nanoparticles offer a new active interface and a potential synergistic effect between the core and shell, making these materials highly attractive in catalytic application. On one hand, when a precious metal is used as the shell material, the catalytic activity can be greatly improved because of the increased surface area and the closed interfacial interaction between the core and the shell. On the other hand, when a precious metal is applied as the core material, the catalytic stability can be remarkably improved because of the protection conferred by the shell material. Therefore, a reasonable design of the core–shell catalyst for target applications must be developed. We summarize the latest advances in the fabrications, properties, and applications of core–shell nanoparticles in this paper. The current research trends of these core–shell catalysts are also highlighted. PMID:27877695

  4. Current advances in precious metal core-shell catalyst design.

    PubMed

    Wang, Xiaohong; He, Beibei; Hu, Zhiyu; Zeng, Zhigang; Han, Sheng

    2014-08-01

    Precious metal nanoparticles are commonly used as the main active components of various catalysts. Given their high cost, limited quantity, and easy loss of catalytic activity under severe conditions, precious metals should be used in catalysts at low volumes and be protected from damaging environments. Accordingly, reducing the amount of precious metals without compromising their catalytic performance is difficult, particularly under challenging conditions. As multifunctional materials, core-shell nanoparticles are highly important owing to their wide range of applications in chemistry, physics, biology, and environmental areas. Compared with their single-component counterparts and other composites, core-shell nanoparticles offer a new active interface and a potential synergistic effect between the core and shell, making these materials highly attractive in catalytic application. On one hand, when a precious metal is used as the shell material, the catalytic activity can be greatly improved because of the increased surface area and the closed interfacial interaction between the core and the shell. On the other hand, when a precious metal is applied as the core material, the catalytic stability can be remarkably improved because of the protection conferred by the shell material. Therefore, a reasonable design of the core-shell catalyst for target applications must be developed. We summarize the latest advances in the fabrications, properties, and applications of core-shell nanoparticles in this paper. The current research trends of these core-shell catalysts are also highlighted.

  5. THE ACS NEARBY GALAXY SURVEY TREASURY. IX. CONSTRAINING ASYMPTOTIC GIANT BRANCH EVOLUTION WITH OLD METAL-POOR GALAXIES

    SciTech Connect

    Girardi, Leo; Williams, Benjamin F.; Gilbert, Karoline M.; Rosenfield, Philip; Dalcanton, Julianne J.; Marigo, Paola; Boyer, Martha L.; Dolphin, Andrew; Weisz, Daniel R.; Skillman, Evan; Melbourne, Jason; Olsen, Knut A. G.; Seth, Anil C.

    2010-12-01

    In an attempt to constrain evolutionary models of the asymptotic giant branch (AGB) phase at the limit of low masses and low metallicities, we have examined the luminosity functions and number ratios between AGB and red giant branch (RGB) stars from a sample of resolved galaxies from the ACS Nearby Galaxy Survey Treasury. This database provides Hubble Space Telescope optical photometry together with maps of completeness, photometric errors, and star formation histories for dozens of galaxies within 4 Mpc. We select 12 galaxies characterized by predominantly metal-poor populations as indicated by a very steep and blue RGB, and which do not present any indication of recent star formation in their color-magnitude diagrams. Thousands of AGB stars brighter than the tip of the RGB (TRGB) are present in the sample (between 60 and 400 per galaxy), hence, the Poisson noise has little impact in our measurements of the AGB/RGB ratio. We model the photometric data with a few sets of thermally pulsing AGB (TP-AGB) evolutionary models with different prescriptions for the mass loss. This technique allows us to set stringent constraints on the TP-AGB models of low-mass, metal-poor stars (with M < 1.5 M{sub sun}, [Fe/H]{approx}< -1.0). Indeed, those which satisfactorily reproduce the observed AGB/RGB ratios have TP-AGB lifetimes between 1.2 and 1.8 Myr, and finish their nuclear burning lives with masses between 0.51 and 0.55 M{sub sun}. This is also in good agreement with recent observations of white dwarf masses in the M4 old globular cluster. These constraints can be added to those already derived from Magellanic Cloud star clusters as important mileposts in the arduous process of calibrating AGB evolutionary models.

  6. METALLICITIES, AGE-METALLICITY RELATIONSHIPS, AND KINEMATICS OF RED GIANT BRANCH STARS IN THE OUTER DISK OF THE LARGE MAGELLANIC CLOUD

    SciTech Connect

    Carrera, R.; Gallart, C.; Aparicio, A.; Hardy, E.

    2011-08-15

    The outer disk of the Large Magellanic Cloud (LMC) is studied in order to unveil clues about its formation and evolution. Complementing our previous studies in innermost fields (3 kpc {approx}< R {approx}< 7 kpc), we obtained deep color-magnitude diagrams in six fields with galactocentric distances from 5.2 kpc to 9.2 kpc and different azimuths. The comparison with isochrones shows that while the oldest population is approximately coeval in all fields, the age of the youngest populations increases with increasing radius. This agrees with the results obtained in the innermost fields. Low-resolution spectroscopy in the infrared Ca II triplet region has been obtained for about 150 stars near the tip of the red giant branch in the same fields. Radial velocities and stellar metallicities have been obtained from these spectra. The metallicity distribution of each field has been analyzed together with those previously studied. The metal content of the most metal-poor objects, which are also the oldest according to the derived age-metallicity relationships, is similar in all fields independently of the galactocentric distance. However, while the metallicity of the most metal-rich objects measured, which are the youngest ones, remains constant in the inner 6 kpc, it decreases with increasing radius from there on. The same is true for the mean metallicity. According to the derived age-metallicity relationships, which are consistent with being the same in all fields, this result may be interpreted as an outside-in formation scheme in opposition with the inside-out scenario predicted by {Lambda}CDM cosmology for a galaxy like the LMC. The analysis of the radial velocities of our sample of giants shows that they follow a rotational cold disk kinematics. The velocity dispersion increases as metallicity decreases indicating that the most metal-poor/oldest objects are distributed in a thicker disk than the most metal-rich/youngest ones in agreement with the findings in other disks

  7. Transition Metal Intercalators as Anticancer Agents—Recent Advances

    PubMed Central

    Deo, Krishant M.; Pages, Benjamin J.; Ang, Dale L.; Gordon, Christopher P.; Aldrich-Wright, Janice R.

    2016-01-01

    The diverse anticancer utility of cisplatin has stimulated significant interest in the development of additional platinum-based therapies, resulting in several analogues receiving clinical approval worldwide. However, due to structural and mechanistic similarities, the effectiveness of platinum-based therapies is countered by severe side-effects, narrow spectrum of activity and the development of resistance. Nonetheless, metal complexes offer unique characteristics and exceptional versatility, with the ability to alter their pharmacology through facile modifications of geometry and coordination number. This has prompted the search for metal-based complexes with distinctly different structural motifs and non-covalent modes of binding with a primary aim of circumventing current clinical limitations. This review discusses recent advances in platinum and other transition metal-based complexes with mechanisms of action involving intercalation. This mode of DNA binding is distinct from cisplatin and its derivatives. The metals focused on in this review include Pt, Ru and Cu along with examples of Au, Ni, Zn and Fe complexes; these complexes are capable of DNA intercalation and are highly biologically active. PMID:27809241

  8. Development of Metal Matrix Composites for NASA's Advanced Propulsion Systems

    NASA Technical Reports Server (NTRS)

    Lee, J.; Elam, S.

    2001-01-01

    The state-of-the-art development of several Metal Matrix Composites (MMC) for NASA's advanced propulsion systems will be presented. The goal is to provide an overview of NASA-Marshall Space Flight Center's on-going activities in MMC components for advanced liquid rocket engines such as the X-33 vehicle's Aerospike engine and X-34's Fastrac engine. The focus will be on lightweight, low cost, and environmental compatibility with oxygen and hydrogen of key MMC materials, within each of NASA's new propulsion application, that will provide a high payoff for NASA's Reusable Launch Vehicles and space access vehicles. In order to fabricate structures from MMC, effective joining methods must be developed to join MMC to the same or to different monolithic alloys. Therefore, a qualitative assessment of MMC's welding and joining techniques will be outlined.

  9. Acrylic and metal based Y-branch plastic optical fiber splitter with optical NOA63 polymer waveguide taper region

    NASA Astrophysics Data System (ADS)

    Ehsan, Abang Annuar; Shaari, Sahbudin; Rahman, Mohd Kamil Abd.

    2011-01-01

    We proposed a simple low-cost acrylic and metal-based Y-branch plastic optical fiber (POF) splitter which utilizes a low cost optical polymer glue NOA63 as the main waveguiding medium at the waveguide taper region. The device is composed of three sections: an input POF waveguide, a middle waveguide taper region and output POF waveguides. A desktop high speed CNC engraver is utilized to produce the mold inserts used for the optical devices. Short POF fibers are inserted into the engraved slots at the input and output ports. UV curable optical polymer glue NOA63 is injected into the waveguide taper region and cured. The assembling is completed when the top plate is positioned to enclose the device structure and connecting screws are secured. Both POF splitters have an average insertion loss of 7.8 dB, coupling ratio of 55: 45 and 57: 43 for the acrylic and metal-based splitters respectively. The devices have excess loss of 4.82 and 4.73 dB for the acrylic and metal-based splitters respectively.

  10. Metal dependence and branched RNA cocrystal structures of the RNA lariat debranching enzyme Dbr1.

    PubMed

    Clark, Nathaniel E; Katolik, Adam; Roberts, Kenneth M; Taylor, Alexander B; Holloway, Stephen P; Schuermann, Jonathan P; Montemayor, Eric J; Stevens, Scott W; Fitzpatrick, Paul F; Damha, Masad J; Hart, P John

    2016-12-20

    Intron lariats are circular, branched RNAs (bRNAs) produced during pre-mRNA splicing. Their unusual chemical and topological properties arise from branch-point nucleotides harboring vicinal 2',5'- and 3',5'-phosphodiester linkages. The 2',5'-bonds must be hydrolyzed by the RNA debranching enzyme Dbr1 before spliced introns can be degraded or processed into small nucleolar RNA and microRNA derived from intronic RNA. Here, we measure the activity of Dbr1 from Entamoeba histolytica by using a synthetic, dark-quenched bRNA substrate that fluoresces upon hydrolysis. Purified enzyme contains nearly stoichiometric equivalents of Fe and Zn per polypeptide and demonstrates turnover rates of ∼3 s(-1) Similar rates are observed when apo-Dbr1 is reconstituted with Fe(II)+Zn(II) under aerobic conditions. Under anaerobic conditions, a rate of ∼4.0 s(-1) is observed when apoenzyme is reconstituted with Fe(II). In contrast, apo-Dbr1 reconstituted with Mn(II) or Fe(II) under aerobic conditions is inactive. Diffraction data from crystals of purified enzyme using X-rays tuned to the Fe absorption edge show Fe partitions primarily to the β-pocket and Zn to the α-pocket. Structures of the catalytic mutant H91A in complex with 7-mer and 16-mer synthetic bRNAs reveal bona fide RNA branchpoints in the Dbr1 active site. A bridging hydroxide is in optimal position for nucleophilic attack of the scissile phosphate. The results clarify uncertainties regarding structure/function relationships in Dbr1 enzymes, and the fluorogenic probe permits high-throughput screening for inhibitors that may hold promise as treatments for retroviral infections and neurodegenerative disease.

  11. Metal dependence and branched RNA cocrystal structures of the RNA lariat debranching enzyme Dbr1

    SciTech Connect

    Clark, Nathaniel E.; Katolik, Adam; Roberts, Kenneth M.; Taylor, Alexander B.; Holloway, Stephen P.; Schuermann, Jonathan P.; Montemayor, Eric J.; Stevens, Scott W.; Fitzpatrick, Paul F.; Damha, Masad J.; Hart, P. John

    2016-12-06

    Intron lariats are circular, branched RNAs (bRNAs) produced during pre-mRNA splicing. Their unusual chemical and topological properties arise from branch-point nucleotides harboring vicinal 2',5'- and 3',5'-phosphodiester linkages. The 2',5'-bonds must be hydrolyzed by the RNA debranching enzyme Dbr1 before spliced introns can be degraded or processed into small nucleolar RNA and microRNA derived from intronic RNA. Here, we measure the activity of Dbr1 from Entamoeba histolytica by using a synthetic, dark-quenched bRNA substrate that fluoresces upon hydrolysis. Purified enzyme contains nearly stoichiometric equivalents of Fe and Zn per polypeptide and demonstrates turnover rates of ~3 s-1. Similar rates are observed when apo-Dbr1 is reconstituted with Fe(II)+Zn(II) under aerobic conditions. Under anaerobic conditions, a rate of ~4.0 s-1 is observed when apoenzyme is reconstituted with Fe(II). In contrast, apo-Dbr1 reconstituted with Mn(II) or Fe(II) under aerobic conditions is inactive. Diffraction data from crystals of purified enzyme using X-rays tuned to the Fe absorption edge show Fe partitions primarily to the β-pocket and Zn to the α-pocket. Structures of the catalytic mutant H91A in complex with 7-mer and 16-mer synthetic bRNAs reveal bona fide RNA branchpoints in the Dbr1 active site. A bridging hydroxide is in optimal position for nucleophilic attack of the scissile phosphate. The results clarify uncertainties regarding structure/function relationships in Dbr1 enzymes, and the fluorogenic probe permits high-throughput screening for inhibitors that may hold promise as treatments for retroviral infections and neurodegenerative disease.

  12. Condensation of refractory metals in asymptotic giant branch and other stellar environments

    SciTech Connect

    Schwander, D.; Berg, T.; Schönhense, G.; Ott, U.

    2014-09-20

    The condensation of material from a gas of solar composition has been extensively studied, but less so condensation in the environment of evolved stars, which has been mainly restricted to major compounds and some specific element groups such as the Rare Earth elements. Also of interest, however, are refractory metals like Mo, Ru, Os, W, Ir, and Pt, which may condense to form refractory metal nuggets (RMNs) like the ones that have been found in association with presolar graphite. We have performed calculations describing the condensation of these elements in the outflows of s-process enriched AGB stars as well as from gas enriched in r-process products. While in carbon-rich environments (C > O), the formation of carbides is expected to consume W, Mo, and V (Lodders and Fegley), the condensation sequence for the other refractory metals under these conditions does not significantly differ from the case of a cooling gas of solar composition. The composition in detail, however, is significantly different due to the completely different source composition. Condensation from an r-process enriched source differs less from the solar case. Elemental abundance ratios of the refractory metals can serve as a guide for finding candidate presolar grains among the RMNs in primitive meteorites—most of which have a solar system origin—for confirmation by isotopic analysis. We apply our calculations to the case of the four RMNs found by Croat et al., which may very well be presolar.

  13. CCD time-series photometry of variable stars in globular clusters and the metallicity dependence of the horizontal branch luminosity

    NASA Astrophysics Data System (ADS)

    Arellano Ferro, A.; Bramich, D. M.; Giridhar, S.

    2017-04-01

    We describe and summarize the findings from our CCD time-series photometry of globular clusters (GCs) program and the use of difference image analysis (DIA) in the extraction of precise light curves down to V≍19 mag in crowded regions. We have discovered approximately 250 variable stars in a sample of 23 selected GCs. The absolute magnitude and [Fe/H] for each individual RR Lyrae is obtained via the Fourier decomposition of the light curve. An average of these parameters leads to the distance and metallicity of the host GCs. We present the mean [Fe/H], MV and distance for 26 GCs based exclusively on the RR Lyrae light curve Fourier decomposition technique on an unprecedented homogeneous scale. We also discuss the luminosity dependence of the horizontal branch (HB) via the MV-[Fe/H] relation. We find that this relation should be considered separately for the RRab and RRc stars.

  14. Advanced technologies for decomtamination and conversion of scrap metal

    SciTech Connect

    Valerie MacNair; Steve Sarten; Thomas Muth; Brajendra Mishra

    1999-05-27

    The Department of Energy (DOE) faces the task of decommissioning much of the vast US weapons complex. One challenge of this effort includes the disposition of large amounts of radioactively contaminated scrap metal (RSM) including but not limited to steel, nickel, copper, and aluminum. The decontamination and recycling of RSM has become a key element in the DOE's strategy for cleanup of contaminated sites and facilities. Recycling helps to offset the cost of decommissioning and saves valuable space in the waste disposal facilities. It also reduces the amount of environmental effects associated with mining new metals. Work on this project is geared toward finding decontamination and/or recycling alternatives for the RSM contained in the decommissioned gaseous diffusion plants including approximately 40,000 tons of nickel. The nickel is contaminated with Technetium-99, and is difficult to remove using traditional decontamination technologies. The project, titled ``Advanced Technologies for Decontamination and Conversion of Scrap Metal'' was proposed as a four phase project. Phase 1 and 2 are complete and Phase 3 will complete May 31, 1999. Stainless steel made from contaminated nickel barrier was successfully produced in Phase 1. An economic evaluation was performed and a market study of potential products from the recycled metal was completed. Inducto-slag refining, after extensive testing, was eliminated as an alternative to remove technetium contamination from nickel. Phase 2 included successful lab scale and pilot scale demonstrations of electrorefining to separate technetium from nickel. This effort included a survey of available technologies to detect technetium in volumetrically contaminated metals. A new process to make sanitary drums from RSM was developed and implemented. Phase 3 included a full scale demonstration of electrorefining, an evaluation of electro-refining alternatives including direct dissolution, melting of nickel into anodes, a laser cutting

  15. Rechargeable dual-metal-ion batteries for advanced energy storage.

    PubMed

    Yao, Hu-Rong; You, Ya; Yin, Ya-Xia; Wan, Li-Jun; Guo, Yu-Guo

    2016-04-14

    Energy storage devices are more important today than any time before in human history due to the increasing demand for clean and sustainable energy. Rechargeable batteries are emerging as the most efficient energy storage technology for a wide range of portable devices, grids and electronic vehicles. Future generations of batteries are required to have high gravimetric and volumetric energy, high power density, low price, long cycle life, high safety and low self-discharge properties. However, it is quite challenging to achieve the above properties simultaneously in state-of-the-art single metal ion batteries (e.g. Li-ion batteries, Na-ion batteries and Mg-ion batteries). In this contribution, hybrid-ion batteries in which various metal ions simultaneously engage to store energy are shown to provide a new perspective towards advanced energy storage: by connecting the respective advantages of different metal ion batteries they have recently attracted widespread attention due to their novel performances. The properties of hybrid-ion batteries are not simply the superposition of the performances of single ion batteries. To enable a distinct description, we only focus on dual-metal-ion batteries in this article, for which the design and the benefits are briefly discussed. We enumerate some new results about dual-metal-ion batteries and demonstrate the mechanism for improving performance based on knowledge from the literature and experiments. Although the search for hybrid-ion batteries is still at an early age, we believe that this strategy would be an excellent choice for breaking the inherent disadvantages of single ion batteries in the near future.

  16. Evolution of Thermally Pulsing Asymptotic Giant Branch Stars. V. Constraining the Mass Loss and Lifetimes of Intermediate-mass, Low-metallicity AGB Stars

    NASA Astrophysics Data System (ADS)

    Rosenfield, Philip; Marigo, Paola; Girardi, Léo; Dalcanton, Julianne J.; Bressan, Alessandro; Williams, Benjamin F.; Dolphin, Andrew

    2016-05-01

    Thermally pulsing asymptotic giant branch (TP-AGB) stars are relatively short lived (less than a few Myr), yet their cool effective temperatures, high luminosities, efficient mass loss, and dust production can dramatically affect the chemical enrichment histories and the spectral energy distributions of their host galaxies. The ability to accurately model TP-AGB stars is critical to the interpretation of the integrated light of distant galaxies, especially in redder wavelengths. We continue previous efforts to constrain the evolution and lifetimes of TP-AGB stars by modeling their underlying stellar populations. Using Hubble Space Telescope (HST) optical and near-infrared photometry taken of 12 fields of 10 nearby galaxies imaged via the Advanced Camera for Surveys Nearby Galaxy Survey Treasury and the near-infrared HST/SNAP follow-up campaign, we compare the model and observed TP-AGB luminosity functions as well as the ratio of TP-AGB to red giant branch stars. We confirm the best-fitting mass-loss prescription, introduced by Rosenfield et al., in which two different wind regimes are active during the TP-AGB, significantly improves models of many galaxies that show evidence of recent star formation. This study extends previous efforts to constrain TP-AGB lifetimes to metallicities ranging -1.59 ≲ {{[Fe/H]}} ≲ -0.56 and initial TP-AGB masses up to ˜4 M ⊙, which include TP-AGB stars that undergo hot-bottom burning. Based on observations made with the NASA/ESA Hubble Space Telescope, obtained from the Data Archive at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5-26555.

  17. Metallicity and the level of the ultraviolet rising branch in elliptical galaxies

    NASA Technical Reports Server (NTRS)

    Faber, S. M.

    1986-01-01

    This final report concerns a project to study the systematics of the ultraviolet flux level in elliptical galaxies. Prior to the inception of this work, the systematic behavior of the ultraviolet flux level was basically unknown and ultraviolet fluxes were observed to vary greatly from galaxy to galaxy. There was a suggestion, however, that there might be a dependence of ultraviolet flux on galaxy metallicity, but the correlation was based on just six galaxies. IUE spectra of elliptical galaxies have been reanalyzed and placed on a consistent, homogenous flux system. The major conclusion is a confirmation of the original hypothesis: galaxies with stronger Mg2 lines show enhanced ultraviolet flux.

  18. Branching ratio and L2 + L3 intensities of 3d-transition metals in phthalocyanines and the amine complexes

    PubMed

    Koshino; Kurata; Isoda; Kobayashi

    2000-08-01

    L(2,3) inner-shell excitation spectra were obtained by electron energy-loss spectroscopy (EELS) for the divalent first transition series metals in phthalocyanine complexes (MPc) such as titanium oxide phthalocyanine (TiOPc), fluoro-chromium phthalocyanine (CrFPc), manganese phthalocyanine (MnPc), iron phthalocyanine (FePc), cobalt phthalocyanine (CoPc), nickel phthalocyanine (NiPc) and copper phthalocyanine (CuPc). It was found that the value of normalized total intensity of I(L2 + L3) was nearly proportional to the formal electron vacancies of each 3d-state, and the values of the branching ratio, I(L3)/I((L2 + L3), represented a high-spin-state rather than low-spin-state for MnPc, FePc and NiPc. EELS was also applied to charge-transfer complexes of FePc with an amine such as pyridine or gamma-picoline. It was concluded that their I(L2 + L3) intensity of Fe showed the decrease in vacancies of 3d-states on the formation of the charge-transfer complex with these amines, which suggests some electron transfer from the amine to Fe in phthalocyanine. The EELS study provides beneficial information for investigating the electronic states of the specific metal sites in organic materials.

  19. Metal fires and their implications for advanced reactors.

    SciTech Connect

    Nowlen, Steven Patrick; Figueroa, Victor G.; Olivier, Tara Jean; Hewson, John C.; Blanchat, Thomas K.

    2010-10-01

    This report details the primary results of the Laboratory Directed Research and Development project (LDRD 08-0857) Metal Fires and Their Implications for Advance Reactors. Advanced reactors may employ liquid metal coolants, typically sodium, because of their many desirable qualities. This project addressed some of the significant challenges associated with the use of liquid metal coolants, primary among these being the extremely rapid oxidation (combustion) that occurs at the high operating temperatures in reactors. The project has identified a number of areas for which gaps existed in knowledge pertinent to reactor safety analyses. Experimental and analysis capabilities were developed in these areas to varying degrees. In conjunction with team participation in a DOE gap analysis panel, focus was on the oxidation of spilled sodium on thermally massive surfaces. These are spills onto surfaces that substantially cool the sodium during the oxidation process, and they are relevant because standard risk mitigation procedures seek to move spill environments into this regime through rapid draining of spilled sodium. While the spilled sodium is not quenched, the burning mode is different in that there is a transition to a smoldering mode that has not been comprehensively described previously. Prior work has described spilled sodium as a pool fire, but there is a crucial, experimentally-observed transition to a smoldering mode of oxidation. A series of experimental measurements have comprehensively described the thermal evolution of this type of sodium fire for the first time. A new physics-based model has been developed that also predicts the thermal evolution of this type of sodium fire for the first time. The model introduces smoldering oxidation through porous oxide layers to go beyond traditional pool fire analyses that have been carried out previously in order to predict experimentally observed trends. Combined, these developments add significantly to the safety

  20. Data Summary Report for the Annual Fourmile Branch and F- and H-Area Seeplines, Appendix IX Metals and Radionuclides, 1998

    SciTech Connect

    Koch, J.

    1999-08-23

    This report presents a summary of the definitive data validation and verification for the 1998 RFI/RI annual Appendix IX metals and radionuclides survey for Fourmile Branch and the F- and H-Area Seeplines. The validation process began with project mobilization and continued through the delivery of EDDs and this report.

  1. The Carina project. VII. Toward the breaking of the age-metallicity degeneracy of red giant branch stars using the C {sub U,} {sub B,} {sub I} index

    SciTech Connect

    Monelli, M.; Milone, A. P.; Gallart, C.; Aparicio, A.; Bono, G.; Stetson, P. B.; Walker, A. R.; Nonino, M.; Dall'Ora, M.; Ferraro, I.; Iannicola, G.; Pulone, L.; Thévenin, F.

    2014-12-01

    We present an analysis of photometric and spectroscopic data of the Carina dSph galaxy, testing a new approach similar to that used to disentangle multiple populations in Galactic globular clusters (GCs). We show that a proper color combination is able to separate a significant fraction of the red giant branch (RGB) of the two main Carina populations (the old one, ∼12 Gyr, and the intermediate-age one, 4-8 Gyr). In particular, the c {sub U,} {sub B,} {sub I} = (U – B) – (B – I) pseudo-color allows us to follow the RGB of both populations along a relevant portion of the RGB. We find that the oldest stars have a more negative c {sub U,} {sub B,} {sub I} pseudo-color than intermediate-age ones. We correlate the pseudo-color of RGB stars with their chemical properties, finding a significant trend between the iron content and the c {sub U,} {sub B,} {sub I}. Stars belonging to the old population are systematically more metal-poor ([Fe/H] =–2.32 ± 0.08 dex) than the intermediate-age ones ([Fe/H] =–1.82 ± 0.03 dex). This gives solid evidence of the chemical evolution history of this galaxy, and we have a new diagnostic that can allow us to break the age-metallicity degeneracy of H-burning advanced evolutionary phases. We compared the distribution of stars in the c {sub U,} {sub B,} {sub I} plane with theoretical isochrones, finding that no satisfactory agreement can be reached with models developed in a theoretical framework based on standard heavy element distributions. Finally, we discuss possible systematic differences when compared with multiple populations in GCs.

  2. The Carina Project. VII. Toward the Breaking of the Age-Metallicity Degeneracy of Red Giant Branch Stars Using the C U, B, I Index

    NASA Astrophysics Data System (ADS)

    Monelli, M.; Milone, A. P.; Fabrizio, M.; Bono, G.; Stetson, P. B.; Walker, A. R.; Cassisi, S.; Gallart, C.; Nonino, M.; Aparicio, A.; Buonanno, R.; Dall'Ora, M.; Ferraro, I.; Iannicola, G.; Pulone, L.; Thévenin, F.

    2014-12-01

    We present an analysis of photometric and spectroscopic data of the Carina dSph galaxy, testing a new approach similar to that used to disentangle multiple populations in Galactic globular clusters (GCs). We show that a proper color combination is able to separate a significant fraction of the red giant branch (RGB) of the two main Carina populations (the old one, ~12 Gyr, and the intermediate-age one, 4-8 Gyr). In particular, the c U, B, I = (U - B) - (B - I) pseudo-color allows us to follow the RGB of both populations along a relevant portion of the RGB. We find that the oldest stars have a more negative c U, B, I pseudo-color than intermediate-age ones. We correlate the pseudo-color of RGB stars with their chemical properties, finding a significant trend between the iron content and the c U, B, I. Stars belonging to the old population are systematically more metal-poor ([Fe/H] =-2.32 ± 0.08 dex) than the intermediate-age ones ([Fe/H] =-1.82 ± 0.03 dex). This gives solid evidence of the chemical evolution history of this galaxy, and we have a new diagnostic that can allow us to break the age-metallicity degeneracy of H-burning advanced evolutionary phases. We compared the distribution of stars in the c U, B, I plane with theoretical isochrones, finding that no satisfactory agreement can be reached with models developed in a theoretical framework based on standard heavy element distributions. Finally, we discuss possible systematic differences when compared with multiple populations in GCs.

  3. Water cooled metal optics for the Advanced Light Source

    SciTech Connect

    McKinney, W.R.; Irick, S.C.; Lunt, D.L.J.

    1991-10-28

    The program for providing water cooled metal optics for the Advanced Light Source at Berkeley is reviewed with respect to fabrication and metrology of the surfaces. Materials choices, surface figure and smoothness specifications, and metrology systems for measuring the plated metal surfaces are discussed. Results from prototype mirrors and grating blanks will be presented, which show exceptionally low microroughness and mid-period error. We will briefly describe out improved version of the Long Trace Profiler, and its importance to out metrology program. We have completely redesigned the mechanical, optical and computational parts of the profiler system with the cooperation of Peter Takacs of Brookhaven, Continental Optical, and Baker Manufacturing. Most important is that one of our profilers is in use at the vendor to allow testing during fabrication. Metrology from the first water cooled mirror for an ALS beamline is presented as an example. The preplating processing and grinding and polishing were done by Tucson Optical. We will show significantly better surface microroughness on electroless nickel, over large areas, than has been reported previously.

  4. Recent Advances in Carbon Capture with Metal-Organic Frameworks.

    PubMed

    Stylianou, Kyriakos C; Queen, Wendy L

    2015-01-01

    The escalating level of CO(2) in the atmosphere is one of the most critical environmental issues of our age. The carbon capture and storage from pilot test plants represents an option for reducing CO(2) emissions, however, the energy cost associated with post-combustion carbon capture process alone is ∼30% of the total energy generated by the power plant. Thus, the generation of carbon capture adsorbents with high uptake capacities, great separation performance and low cost is of paramount importance. Metal-organic frameworks are infinite networks of metal-containing nodes bridged by organic ligands through coordination bonds into porous extended structures and several reports have revealed that they are ideal candidates for the selective capture of CO(2). In this review we summarize recent advances related to the synthesis of porous MOFs and the latest strategies to enhance the CO(2) adsorption enthalpies and capacities at low-pressures, increase hydrolytic and mechanical stabilities, and improve the ease of regeneration. Although they show great promise for post-combustion carbon capture, there are still major challenges that must be overcome before they can be used for such a large-scale application.

  5. Advanced in aerospace lubricant and wear metal analysis

    SciTech Connect

    Saba, C.S.; Centers, P.W.

    1995-09-01

    Wear metal analysis continues to play an effective diagnostic role for condition monitoring of gas turbine engines. Since the early 1960s the United States` military services have been using spectrometric oil analysis program (SOAP) to monitor the condition of aircraft engines. The SOAP has proven to be effective in increasing reliability, fleet readiness and avoiding losses of lives and machinery. Even though historical data have demonstrated the success of the SOAP in terms of detecting imminent engine failure verified by maintenance personnel, the SOAP is not a stand-alone technique and is limited in its detection of large metallic wear debris. In response, improved laboratory, portable, in-line and on-line diagnostic techniques to perfect SOAP and oil condition monitoring have been sought. The status of research and development as well as the direction of future developmental activities in oil analysis due to technological opportunities, advanced in engine development and changes in military mission are reviewed and discussed. 54 refs.

  6. Advanced Metal-Hydrides-Based Thermal Battery: A New Generation of High Density Thermal Battery Based on Advanced Metal Hydrides

    SciTech Connect

    2011-12-01

    HEATS Project: The University of Utah is developing a compact hot-and-cold thermal battery using advanced metal hydrides that could offer efficient climate control system for EVs. The team’s innovative designs of heating and cooling systems for EVs with high energy density, low-cost thermal batteries could significantly reduce the weight and eliminate the space constraint in automobiles. The thermal battery can be charged by plugging it into an electrical outlet while charging the electric battery and it produces heat and cold through a heat exchanger when discharging. The ultimate goal of the project is a climate-controlling thermal battery that can last up to 5,000 charge and discharge cycles while substantially increasing the driving range of EVs, thus reducing the drain on electric batteries.

  7. Metallic Seal Development for Advanced Docking/Berthing System

    NASA Technical Reports Server (NTRS)

    Oswald, Jay; Daniels, Christopher; Dunlap, Patrick, Jr.; Steinetz, Bruce

    2006-01-01

    Feasibility of metal-to-metal androgenous seals has been demonstrated. Techniques to minimize surface irregularities must be examined. Two concepts investigated: 1) Flexible metal interface with elastomeric preloader; 2) Flexibility will accommodate any surface irregularities from the mating surface. Rigid metal interface with elastomeric preloader. Rigidity of the metal surface will prevent irregularities (waves) from occurring.

  8. Observations of the Hot Horizontal Branch Stars in the Metal-Rich Bulge Globular Cluster NGC 6388

    NASA Technical Reports Server (NTRS)

    Moehler, S.; Sweigart, A. V.

    2006-01-01

    The metal-rich bulge globular cluster NGC 6388 shows a distinct blue horizontal-branch tail in its colour-magnitude diagram (Rich et al. 1997) and is thus a strong case of the well-known 2nd Parameter Problem. In addition, its horizontal branch (HB) shows an upward tilt toward bluer colours, which cannot be explained by canonical evolutionary models. Several non-canonical scenarios have been proposed to explain these puzzling observations. In order to test the predictions of these scenarios, we have obtained medium resolution spectra to determine the atmospheric parameters of a sample of the blue HB stars in NGC 6388.Using the medium resolution spectra, we determine effective temperatures, surface gravities and helium abundances by fitting the observed Balmer and helium lines with appropriate theoretical stellar spectra. As we know the distance to the cluster, we can verify our results by determining masses for the stars. During the data reduction we took special care to correctly subtract the background, which is dominated by the overlapping spectra of cool stars. The cool blue tail stars in our sample with T(sub eff) approximately 10000 K have lower than canonical surface gravities, suggesting that these stars are, on average, approximately equal to 0.4 mag brighter than canonical HB stars in agreement with the observed upward slope of the HB in NGC 6388. Moreover, the mean mass of these stars agrees well with theoretical predictions. In contrast, the hot blue tail stars in our sample with T(sub eff) greater than or equal to 12000 K show significantly lower surface gravities than predicted by any scenario, which can reproduce the photometric observations. Their masses are also too low by about a factor of 2 compared to theoretical predictions. The physical parameters of the blue HB stars at about 10,000 K support the helium pollution scenario. The low gravities and masses of the hot blue tail stars, however, are probably caused by problems with the data reduction

  9. THREE-DIMENSIONAL HYDRODYNAMICAL SIMULATIONS OF A PROTON INGESTION EPISODE IN A LOW-METALLICITY ASYMPTOTIC GIANT BRANCH STAR

    SciTech Connect

    Stancliffe, Richard J.; Lattanzio, John C.; Heap, Stuart A.; Campbell, Simon W.; Dearborn, David S. P.

    2011-12-01

    We use the three-dimensional (3D) stellar structure code DJEHUTY to model the ingestion of protons into the intershell convection zone of a 1 M{sub Sun} asymptotic giant branch star of metallicity Z = 10{sup -4}. We have run two simulations: a low-resolution one of around 300,000 zones and a high-resolution one consisting of 2,000,000 zones. Both simulations have been evolved for about 4 hr of stellar time. We observe the existence of fast, downward flowing plumes that are able to transport hydrogen into close proximity to the helium-burning shell before burning takes place. The intershell in the 3D model is richer in protons than the 1D model by several orders of magnitude and so we obtain substantially higher hydrogen-burning luminosities-over 10{sup 8} L{sub Sun} in the high-resolution simulation-than are found in the 1D model. Convective velocities in these simulations are over ten times greater than the predictions of mixing length theory, though the 3D simulations have greater energy generation due to the enhanced hydrogen burning. We find no evidence of the convective zone splitting into two, though this could be as a result of insufficient spatial resolution or because the models have not been evolved for long enough. We suggest that the 1D mixing length theory and particularly the use of a diffusion algorithm for mixing do not give an accurate picture of these events. An advective mixing scheme may give a better representation of the transport processes seen in the 3D models.

  10. Advances in Understanding How Heavy Metal Pollution Triggers Gastric Cancer.

    PubMed

    Yuan, Wenzhen; Yang, Ning; Li, Xiangkai

    2016-01-01

    With the development of industrialization and urbanization, heavy metals contamination has become a major environmental problem. Numerous investigations have revealed an association between heavy metal exposure and the incidence and mortality of gastric cancer. The mechanisms of heavy metals (lead, cadmium, mercury, chromium, and arsenic) contamination leading to gastric cancer are concluded in this review. There are four main potential mechanisms: (1) Heavy metals disrupt the gastric mucosal barrier by decreasing mucosal thickness, mucus content, and basal acid output, thereby affecting the function of E-cadherin and inducing reactive oxygen species (ROS) damage. (2) Heavy metals directly or indirectly induce ROS generation and cause gastric mucosal and DNA lesions, which subsequently alter gene regulation, signal transduction, and cell growth, ultimately leading to carcinogenesis. Exposure to heavy metals also enhances gastric cancer cell invasion and metastasis. (3) Heavy metals inhibit DNA damage repair or cause inefficient lesion repair. (4) Heavy metals may induce other gene abnormalities. In addition, heavy metals can induce the expression of proinflammatory chemokine interleukin-8 (IL-8) and microRNAs, which promotes tumorigenesis. The present review is an effort to underline the human health problem caused by heavy metal with recent development in order to garner a broader perspective.

  11. Advances in Understanding How Heavy Metal Pollution Triggers Gastric Cancer

    PubMed Central

    Yuan, Wenzhen; Yang, Ning

    2016-01-01

    With the development of industrialization and urbanization, heavy metals contamination has become a major environmental problem. Numerous investigations have revealed an association between heavy metal exposure and the incidence and mortality of gastric cancer. The mechanisms of heavy metals (lead, cadmium, mercury, chromium, and arsenic) contamination leading to gastric cancer are concluded in this review. There are four main potential mechanisms: (1) Heavy metals disrupt the gastric mucosal barrier by decreasing mucosal thickness, mucus content, and basal acid output, thereby affecting the function of E-cadherin and inducing reactive oxygen species (ROS) damage. (2) Heavy metals directly or indirectly induce ROS generation and cause gastric mucosal and DNA lesions, which subsequently alter gene regulation, signal transduction, and cell growth, ultimately leading to carcinogenesis. Exposure to heavy metals also enhances gastric cancer cell invasion and metastasis. (3) Heavy metals inhibit DNA damage repair or cause inefficient lesion repair. (4) Heavy metals may induce other gene abnormalities. In addition, heavy metals can induce the expression of proinflammatory chemokine interleukin-8 (IL-8) and microRNAs, which promotes tumorigenesis. The present review is an effort to underline the human health problem caused by heavy metal with recent development in order to garner a broader perspective. PMID:27803929

  12. Advanced Micro/Nanostructures for Lithium Metal Anodes

    PubMed Central

    Zhang, Rui; Li, Nian‐Wu; Cheng, Xin‐Bing; Yin, Ya‐Xia

    2017-01-01

    Owning to their very high theoretical capacity, lithium metal anodes are expected to fuel the extensive practical applications in portable electronics and electric vehicles. However, unstable solid electrolyte interphase and lithium dendrite growth during lithium plating/stripping induce poor safety, low Coulombic efficiency, and short span life of lithium metal batteries. Lately, varies of micro/nanostructured lithium metal anodes are proposed to address these issues in lithium metal batteries. With the unique surface, pore, and connecting structures of different nanomaterials, lithium plating/stripping processes have been regulated. Thus the electrochemical properties and lithium morphologies have been significantly improved. These micro/nanostructured lithium metal anodes shed new light on the future applications for lithium metal batteries. PMID:28331792

  13. Advanced Micro/Nanostructures for Lithium Metal Anodes.

    PubMed

    Zhang, Rui; Li, Nian-Wu; Cheng, Xin-Bing; Yin, Ya-Xia; Zhang, Qiang; Guo, Yu-Guo

    2017-03-01

    Owning to their very high theoretical capacity, lithium metal anodes are expected to fuel the extensive practical applications in portable electronics and electric vehicles. However, unstable solid electrolyte interphase and lithium dendrite growth during lithium plating/stripping induce poor safety, low Coulombic efficiency, and short span life of lithium metal batteries. Lately, varies of micro/nanostructured lithium metal anodes are proposed to address these issues in lithium metal batteries. With the unique surface, pore, and connecting structures of different nanomaterials, lithium plating/stripping processes have been regulated. Thus the electrochemical properties and lithium morphologies have been significantly improved. These micro/nanostructured lithium metal anodes shed new light on the future applications for lithium metal batteries.

  14. Advanced Melting Technologies: Energy Saving Concepts and Opportunities for the Metal Casting Industry

    SciTech Connect

    none,

    2005-11-01

    The study examines current and emerging melting technologies and discusses their technical barriers to scale-up issues and research needed to advance these technologies, improving melting efficiency, lowering metal transfer heat loss, and reducing scrap.

  15. Advances in metal-induced oxidative stress and human disease.

    PubMed

    Jomova, Klaudia; Valko, Marian

    2011-05-10

    Detailed studies in the past two decades have shown that redox active metals like iron (Fe), copper (Cu), chromium (Cr), cobalt (Co) and other metals undergo redox cycling reactions and possess the ability to produce reactive radicals such as superoxide anion radical and nitric oxide in biological systems. Disruption of metal ion homeostasis may lead to oxidative stress, a state where increased formation of reactive oxygen species (ROS) overwhelms body antioxidant protection and subsequently induces DNA damage, lipid peroxidation, protein modification and other effects, all symptomatic for numerous diseases, involving cancer, cardiovascular disease, diabetes, atherosclerosis, neurological disorders (Alzheimer's disease, Parkinson's disease), chronic inflammation and others. The underlying mechanism of action for all these metals involves formation of the superoxide radical, hydroxyl radical (mainly via Fenton reaction) and other ROS, finally producing mutagenic and carcinogenic malondialdehyde (MDA), 4-hydroxynonenal (HNE) and other exocyclic DNA adducts. On the other hand, the redox inactive metals, such as cadmium (Cd), arsenic (As) and lead (Pb) show their toxic effects via bonding to sulphydryl groups of proteins and depletion of glutathione. Interestingly, for arsenic an alternative mechanism of action based on the formation of hydrogen peroxide under physiological conditions has been proposed. A special position among metals is occupied by the redox inert metal zinc (Zn). Zn is an essential component of numerous proteins involved in the defense against oxidative stress. It has been shown, that depletion of Zn may enhance DNA damage via impairments of DNA repair mechanisms. In addition, Zn has an impact on the immune system and possesses neuroprotective properties. The mechanism of metal-induced formation of free radicals is tightly influenced by the action of cellular antioxidants. Many low-molecular weight antioxidants (ascorbic acid (vitamin C), alpha

  16. Advanced technologies for decontamination and conversion of scrap metal

    SciTech Connect

    Muth, T.R.; Shasteen, K.E.; Liby, A.L.

    1995-10-01

    The Department of Energy (DOE) accumulated large quantities of radioactive scrap metal (RSM) through historic maintenance activities. The Decontamination and Decommissioning (D&D) of major sites formerly engaged in production of nuclear materials and manufacture of nuclear weapons will generate additional quantities of RSM, as much as 3 million tons of such metal according to a recent study. The recycling of RSM is quickly becoming appreciated as a key strategy in DOE`s cleanup of contaminated sites and facilities. The work described here has focused on recycle of the concentrated and high-value contaminated scrap metal resource that will arise from cleanup of DOE`s gaseous diffusion plants.

  17. Advanced chemical propulsion at NASA Lewis: Metallized and high energy density propellants

    NASA Technical Reports Server (NTRS)

    Palaszewski, Bryan A.

    1991-01-01

    Two of the programs at the NASA Lewis Research Center investigating advanced systems for future space missions are the Metallized Propellant Program and the Advanced Concepts Program. Each program includes both experimental and theoretical studies of future propellants and the associated vehicle impacts and significant payload benefits for many types of space transportation. These programs are described.

  18. Recent advances in metal hydrides for clean energy applications

    SciTech Connect

    Ronnebro, Ewa; Majzoub, Eric H.

    2013-06-01

    Metal hydrides are a fascinating class of materials that can be utilized for a surprising variety of clean energy applications, including smart solar collectors, smart windows, sensors, thermal energy storage, and batteries, in addition to their traditional application for hydrogen storage. Over the past decade, research on metal hydrides for hydrogen storage increased due to global governmental incentives and an increased focus on hydrogen storage research for polymer electrolyte membrane fuel cell operation. Tremendous progress has been made in so-called complex metal hydrides for hydrogen storage applications with the discovery of many new hydrides containing covalently bound complex anions. Many of these materials have applications beyond hydrogen storage and are being investigated for lithium-ion battery separator and anode materials. In this issue of MRS Bulletin , we present the state of the art of key evolving metal-hydride-based clean energy technologies with an outlook toward future needs.

  19. Advanced technologies for decontamination and conversion of scrap metal

    SciTech Connect

    Muth, T.R.; Shasteen, K.E.; Liby, A.L.

    1995-12-01

    The Department of Energy (DOE) accumulated large quantities of radioactive scrap metal (RSM) through historic maintenance activities. The Decontamination and Decommissioning (D&D) of major sites formerly engaged in production of nuclear materials and manufacture of nuclear weapons will generate additional quantities of RSM, as much as 3 million tons of such metal according to a recent study. The recycling of RSM is quickly becoming appreciated as a key strategy in DOE`s cleanup of contaminated sites and facilities.

  20. The ACP (Advanced Computer Program) Branch bus and real-time applications of the ACP multiprocessor system

    SciTech Connect

    Hance, R.; Areti, H.; Atac, R.; Biel, J.; Cook, A.; Fischler, M.; Gaines, I.; Husby, D.; Nash, T.; Zmuda, T.

    1987-05-08

    The ACP Branchbus, a high speed differential bus for data movement in multiprocessing and data acquisition environments, is described. This bus was designed as the central bus in the ACP multiprocessing system. In its full implementation with 16 branches and a bus switch, it will handle data rates of 160 MByte/sec and allow reliable data transmission over inter rack distances. We also summarize applications of the ACP system in experimental data acquisition, triggering and monitoring, with special attention paid to FASTBUS environments.

  1. Recent advances in metathesis-derived polymers containing transition metals in the side chain

    PubMed Central

    Demonceau, Albert; Fischer, Helmut

    2015-01-01

    Summary This account critically surveys the field of side-chain transition metal-containing polymers as prepared by controlled living ring-opening metathesis polymerization (ROMP) of the respective metal-incorporating monomers. Ferrocene- and other metallocene-modified polymers, macromolecules including metal-carbonyl complexes, polymers tethering early or late transition metal complexes, etc. are herein discussed. Recent advances in the design and syntheses reported mainly during the last three years are highlighted, with special emphasis on new trends for superior applications of these hybrid materials. PMID:26877797

  2. Advanced analysis of metal distributions in human hair

    SciTech Connect

    Kempson, Ivan M.; Skinner, William M.

    2008-06-09

    A variety of techniques (secondary electron microscopy with energy dispersive X-ray analysis, time-of-flight-secondary ion mass spectrometry, and synchrotron X-ray fluorescence) were utilized to distinguish metal contamination occurring in hair arising from endogenous uptake from an individual exposed to a polluted environment, in this case a lead smelter. Evidence was sought for elements less affected by contamination and potentially indicative of biogenic activity. The unique combination of surface sensitivity, spatial resolution, and detection limits used here has provided new insight regarding hair analysis. Metals such as Ca, Fe, and Pb appeared to have little representative value of endogenous uptake and were mainly due to contamination. Cu and Zn, however, demonstrate behaviors worthy of further investigation into relating hair concentrations to endogenous function.

  3. Application of metallic nanoparticle suspensions in advanced cooling systems

    SciTech Connect

    Lee, S.; Choi, S.U.S.

    1996-12-31

    In the development of energy-efficient heat transfer fluids that are required in many cooling applications, low thermal conductivity is a primary limitation. However, it is well known that at room temperature, metals in solid form have orders-of-magnitude higher thermal conductivities than those of fluids. Therefore, the thermal conductivities of fluids that contain suspended solid metallic particles are expected to be significantly enhanced over those of conventional heat transfer fluids. In fact, numerous theoretical and experimental studies of the effective thermal conductivity of dispersions that contain solid particles have been conducted since Maxwell`s theoretical was published more than 100 years ago. However, all of the studies on thermal conductivity of suspensions have been confined to millimeter- or micrometer-sized particles.

  4. Carbon formation and metal dusting in advanced coal gasification processes

    SciTech Connect

    DeVan, J.H.; Tortorelli, P.F.; Judkins, R.R.; Wright, I.G.

    1997-02-01

    The product gases generated by coal gasification systems contain high concentrations of CO and, characteristically, have relatively high carbon activities. Accordingly, carbon deposition and metal dusting can potentially degrade the operation of such gasifier systems. Therefore, the product gas compositions of eight representative gasifier systems were examined with respect to the carbon activity of the gases at temperatures ranging from 480 to 1,090 C. Phase stability calculations indicated that Fe{sub 3}C is stable only under very limited thermodynamic conditions and with certain kinetic assumptions and that FeO and Fe{sub 0.877}S tend to form instead of the carbide. As formation of Fe{sub 3}C is a necessary step in the metal dusting of steels, there are numerous gasifier environments where this type of carbon-related degradation will not occur, particularly under conditions associated with higher oxygen and sulfur activities. These calculations also indicated that the removal of H{sub 2}S by a hot-gas cleanup system may have less effect on the formation of Fe{sub 3}C in air-blown gasifier environments, where the iron oxide phase can exist and is unaffected by the removal of sulfur, than in oxygen-blown systems, where iron sulfide provides the only potential barrier to Fe{sub 3}C formation. Use of carbon- and/or low-alloy steels dictates that the process gas composition be such that Fe{sub 3}C cannot form if the potential for metal dusting is to be eliminated. Alternatively, process modifications could include the reintroduction of hydrogen sulfide, cooling the gas to perhaps as low as 400 C and/or steam injection. If higher-alloy steels are used, a hydrogen sulfide-free gas may be processed without concern about carbon deposition and metal dusting.

  5. Advanced technologies for decontamination and conversion of scrap metal

    SciTech Connect

    MacNair, V.; Muth, T.; Shasteen, K.; Liby, A.; Hradil, G.; Mishra, B.

    1996-12-31

    In October 1993, Manufacturing Sciences Corporation was awarded DOE contract DE-AC21-93MC30170 to develop and test recycling of radioactive scrap metal (RSM) to high value and intermediate and final product forms. This work was conducted to help solve the problems associated with decontamination and reuse of the diffusion plant barrier nickel and other radioactively contaminated scrap metals present in the diffusion plants. Options available for disposition of the nickel include decontamination and subsequent release or recycled product manufacture for restricted end use. Both of these options are evaluated during the course of this research effort. work during phase I of this project successfully demonstrated the ability to make stainless steel from barrier nickel feed. This paved the way for restricted end use products made from stainless steel. Also, after repeated trials and studies, the inducto-slag nickel decontamination process was eliminated as a suitable alternative. Electro-refining appeared to be a promising technology for decontamination of the diffusion plant barrier material. Goals for phase II included conducting experiments to facilitate the development of an electro-refining process to separate technetium from nickel. In parallel with those activities, phase II efforts were to include the development of the necessary processes to make useful products from radioactive scrap metal. Nickel from the diffusion plants as well as stainless steel and carbon steel could be used as feed material for these products.

  6. Advanced technologies for decontamination and conversion of scrap metals

    SciTech Connect

    Muth, T.R.; Moore, J.; Olson, D.; Mishra, B.

    1994-12-31

    Recycle of radioactive scrap metals (RSM) from decommissioning of DOE uranium enrichment and nuclear weapons manufacturing facilities is mandatory to recapture the value of these metals and avoid the high cost of disposal by burial. The scrap metals conversion project detailed below focuses on the contaminated nickel associated with the gaseous diffusion plants. Stainless steel can be produced in MSC`s vacuum induction melting process (VIM) to the S30400 specification using nickel as an alloy constituent. Further the case alloy can be rolled in MSC`s rolling mill to the mechanical property specification for S30400 demonstrating the capability to manufacture the contaminated nickel into valuable end products at a facility licensed to handle radioactive materials. Bulk removal of Technetium from scrap nickel is theoretically possible in a reasonable length of time with the high calcium fluoride flux, however the need for the high temperature creates a practical problem due to flux volatility. Bulk decontamination is possible and perhaps more desirable if nickel is alloyed with copper to lower the melting point of the alloy allowing the use of the high calcium fluoride flux. Slag decontamination processes have been suggested which have been proven technically viable at the Colorado School of Mines.

  7. Advanced Gasification Mercury/Trace Metal Control with Monolith Traps

    SciTech Connect

    Musich, Mark; Swanson, Michael; Dunham, Grant; Stanislowski, Joshua

    2010-10-05

    Two Corning monoliths and a non-carbon-based material have been identified as potential additives for mercury capture in syngas at temperatures above 400°F and pressure of 600 psig. A new Corning monolith formulation, GR-F1-2189, described as an active sample appeared to be the best monolith tested to date. The Corning SR Liquid monolith concept continues to be a strong candidate for mercury capture. Both monolith types allowed mercury reduction to below 5-μg/m{sup 3} (~5 ppb), a current U.S. Department of Energy (DOE) goal for trace metal control. Preparation methods for formulating the SR Liquid monolith impacted the ability of the monolith to capture mercury. The Energy & Environmental Research Center (EERC)-prepared Noncarbon Sorbents 1 and 2 appeared to offer potential for sustained and significant reduction of mercury concentration in the simulated fuel gas. The Noncarbon Sorbent 1 allowed sustained mercury reduction to below 5-μg/m{sup 3} (~5 ppb). The non-carbon-based sorbent appeared to offer the potential for regeneration, that is, desorption of mercury by temperature swing (using nitrogen and steam at temperatures above where adsorption takes place). A Corning cordierite monolith treated with a Group IB metal offered limited potential as a mercury sorbent. However, a Corning carbon-based monolith containing prereduced metallic species similar to those found on the noncarbon sorbents did not exhibit significant or sustained mercury reduction. EERC sorbents prepared with Group IB and IIB selenide appeared to have some promise for mercury capture. Unfortunately, these sorbents also released Se, as was evidenced by the measurement of H2Se in the effluent gas. All sorbents tested with arsine or hydrogen selenide, including Corning monoliths and the Group IB and IIB metal-based materials, showed an ability to capture arsine or hydrogen selenide at 400°F and 600 psig. Based on current testing, the noncarbon metal-based sorbents appear to be the most

  8. ADVANCED GASIFICATION MERCURY/TRACE METAL CONTROL WITH MONOLITH TRAPS

    SciTech Connect

    Mark A. Musich; Michael L. Swanson; Grant E. Dunham; Joshua J. Stanislowski

    2010-07-31

    Two Corning monoliths and a non-carbon-based material have been identified as potential additives for mercury capture in syngas at temperatures above 400°F and pressure of 600 psig. A new Corning monolith formulation, GR-F1-2189, described as an active sample appeared to be the best monolith tested to date. The Corning SR Liquid monolith concept continues to be a strong candidate for mercury capture. Both monolith types allowed mercury reduction to below 5-μg/m3 (~5 ppb), a current U.S. Department of Energy (DOE) goal for trace metal control. Preparation methods for formulating the SR Liquid monolith impacted the ability of the monolith to capture mercury. The Energy & Environmental Research Center (EERC)-prepared Noncarbon Sorbents 1 and 2 appeared to offer potential for sustained and significant reduction of mercury concentration in the simulated fuel gas. The Noncarbon Sorbent 1 allowed sustained mercury reduction to below 5-μg/m3 (~5 ppb). The non-carbon-based sorbent appeared to offer the potential for regeneration, that is, desorption of mercury by temperature swing (using nitrogen and steam at temperatures above where adsorption takes place). A Corning cordierite monolith treated with a Group IB metal offered limited potential as a mercury sorbent. However, a Corning carbon-based monolith containing prereduced metallic species similar to those found on the noncarbon sorbents did not exhibit significant or sustained mercury reduction. EERC sorbents prepared with Group IB and IIB selenide appeared to have some promise for mercury capture. Unfortunately, these sorbents also released Se, as was evidenced by the measurement of H2Se in the effluent gas. All sorbents tested with arsine or hydrogen selenide, including Corning monoliths and the Group IB and IIB metal-based materials, showed an ability to capture arsine or hydrogen selenide at 400°F and 600 psig. Based on current testing, the noncarbon metal-based sorbents appear to be the most effective arsine

  9. Advanced refractory metals and composites for extraterrestrial power systems

    NASA Technical Reports Server (NTRS)

    Titran, R. H.; Grobstein, Toni L.

    1990-01-01

    Concepts for future space power systems include nuclear and focused solar heat sources coupled to static and dynamic power-conversion devices; such systems must be designed for service lives as long as 30 years, despite service temperatures of the order of 1600 K. Materials are a critical technology-development factor in such aspects of these systems as reactor fuel containment, environmental protection, power management, and thermal management. Attention is given to the prospective performance of such refractory metals as Nb, W, and Mo alloys, W fiber-reinforced Nb-matrix composites, and HfC precipitate-strengthened W-Re alloys.

  10. Shielded Metal Arc Welding Consumables for Advanced High Strength Steels

    DTIC Science & Technology

    1992-02-01

    100 ksi) depends on the availability of adequate welding consumables. In the case of shielded metal arc welding, the electrodes must provide...associated with the potassium silicate binder (K2 SiO3 .nH2 0). The fluxes were then crushed and sized to 14# Tyler mesh (1.7 mm screen aperture) to...determined that the hydrated potassium silicate binder (K2 SiO3 .nH20) used in this investi- gation was 50 wt. pct. potassium silicate (K 2SiO 3 ) and

  11. Assessment of Metal Media Filters for Advanced Coal-Based Power Generation Applications

    SciTech Connect

    Alvin, M.A.

    2002-09-19

    Advanced coal and biomass-based gas turbine power generation technologies (IGCC, PFBC, PCFBC, and Hipps) are currently under development and demonstration. Efforts at Siemens Westinghouse Power Corporation (SWPC) have been focused on the development and demonstration of hot gas filter systems as an enabling technology for power generation. This paper reviews SWPC's material and component assessment efforts, identifying the performance, stability, and life of porous metal, advanced alloy, and intermetallic filters under simulated, pressurized fluidized-bed combustion conditions.

  12. Analytical and experimental evaluation of joining silicon nitride to metal and silicon carbide to metal for advanced heat engine applications

    SciTech Connect

    Kang, S.; Selverian, J.H.; Kim, H.; O'Niel, D.; Kim, K. )

    1990-04-01

    This report summarizes the results of Phase I of Analytical and Experimental Evaluation of Joining Silicon Nitride to Metal and Silicon Carbide to Metal and Silicon Carbide to Metal for Advanced Heat Engine Applications. A general methodology was developed to optimize the joint geometry and material systems for 650 and 950{degree}C applications. Failure criteria were derived to predict the fracture of the braze and ceramic. Extensive finite element analyses (FEA), using ABAQUS code, were performed to examine various joint geometries and to evaluate the affect of different interlayers on the residual stress state. Also, material systems composed of coating materials, interlayers, and braze alloys were developed for the program based on the chemical stability and strength of the joints during processing and service. Finally, the FEA results were compared with experiments using an idealized strength relationship. The results showed that the measured strength of the joint reached 30--90% of the strength by predicted by FEA. Overall results demonstrated that FEA is an effective tool for designing the geometries of ceramic-metal joints and that joining by brazing is a relevant method for advanced heat engine applications. 33 refs., 54 figs., 36 tabs.

  13. Closeout of Advanced Boron and Metal Loaded High Porosity Carbons.

    SciTech Connect

    Peter C. Eklund; T. C. Mike Chung; Henry C. Foley; Vincent H. Crespi

    2011-05-01

    The Penn State effort explored the development of new high-surface-area materials for hydrogen storage, materials that could offer enhancement in the hydrogen binding energy through a direct chemical modification of the framework in high specific-surface-area platforms. The team chemically substituted boron into the hexagonal sp2 carbon framework, dispersed metal atoms bound to the boro-carbon structure, and generated the theory of novel nanoscale geometries that can enhance storage through chemical frustration, sheet curvature, electron deficiency, large local fields and mixed hybridization states. New boro-carbon materials were synthesized by high temperature plasma, pyrolysis of boron-carbon precursor molecules, and post-synthesis modification of carbons. Hydrogen uptake has been assessed, and several promising leads have been identified, with the requirement to simultaneously optimize total surface area while maintaining the enhanced hydrogen binding energies already demonstrated.

  14. [Heavy metal pollution ecology of macro-fungi: research advances and expectation].

    PubMed

    Zhou, Qi-xing; An, Xin-long; Wei, Shu-he

    2008-08-01

    Macro-fungi are the main component of biosphere and one of the ecological resources, and play very important roles in matter cycling and in maintaining ecological balances. This paper summarized and reviewed the research advances in the eco-toxicological effects of heavy metals on macro-fungi, the bioaccumulation function of macro-fungi on heavy metals, the ecological adaptation mechanisms of macro-fungi to heavy metal pollution, the role of macro-fungi as a bio-indicator of heavy metal pollution, and the potential of macro-fungi in the ecological remediation of contaminated environment. To strengthen the researches on the heavy metal pollution ecology of macro-fungi would be of practical significance in the reasonable utilization of macro-fungi resources and in the ecological remediation of contaminated environment.

  15. Multi-color photometry of the Galactic globular cluster M 75 = NGC 6864. A new sensitive metallicity indicator and the position of the horizontal branch in UV

    NASA Astrophysics Data System (ADS)

    Kravtsov, V.; Alcaíno, G.; Marconi, G.; Alvarado, F.

    2007-07-01

    Aims:We carry out and analyze new multi-color photometry of the Galactic globular cluster (GC) M 75 in UBVI and focus on the brighter sequences of the color-magnitude diagram (CMD), with particular emphasis on their location in U-based CMD. Specifically, we study the level both of the horizontal (HB) and red giant branches (RGB) relative to the main-sequence turnoff (TO) in the U magnitude. Methods: Along with the presented photometry of M 75, we use our collection of photometric data on GCs belonging to the metal-poor range, [Fe/H]{ZW}<-1.1 dex, obtained from observations with different equipment, but calibrated by standard stars situated in the observed cluster fields. Results: We confirm our earlier finding, and extend it to a larger magnitude range. We demonstrate that Δ U_TO^BHB expressing the difference in U magnitude between the TO point and the level of the blue HB, near its red boundary, of the metal-poor GCs observed with the EMMI camera of the NTT/ESO telescope is about 0.4-0.5 mag smaller as compared to GCs observed with the 100 arcsec telescope and 1.3 m Warsaw telescope of the Las Campanas Observatory. At the same time, Δ U_TO^RGB, the difference in U magnitude between the TO and RGB inflection (brightest) points, does not show such an apparent dependence on the characteristics of U filters used, but it depends on cluster metallicity. We have shown, for the first time, the dependence of the parameter Δ U_TO^RGB on [Fe/H] and have estimated its analytical expression, by assuming a linear relation between the parameter and metallicity. Its slope, Δ U_TO^RGB/Δ[Fe/H] 1.2 mag/dex, is approximately a factor of two steeper than that of the dependence of the RGB bump position in the V magnitude on metallicity. The asymptotic giant branch (AGB) clump and features of the RGB luminosity function (LF) of M 75 are also discussed. Based on observations with the 1.3 m Warsaw telescope at Las Campanas Observatory. Individual photometry measurements are only

  16. Effect of Metallicity on the Evolution of the Habitable Zone from the Pre-main Sequence to the Asymptotic Giant Branch and the Search for Life

    NASA Astrophysics Data System (ADS)

    Danchi, William C.; Lopez, Bruno

    2013-05-01

    During the course of stellar evolution, the location and width of the habitable zone changes as the luminosity and radius of the star evolves. The duration of habitability for a planet located at a given distance from a star is greatly affected by the characteristics of the host star. A quantification of these effects can be used observationally in the search for life around nearby stars. The longer the duration of habitability, the more likely it is that life has evolved. The preparation of observational techniques aimed at detecting life would benefit from the scientific requirements deduced from the evolution of the habitable zone. We present a study of the evolution of the habitable zone around stars of 1.0, 1.5, and 2.0 M ⊙ for metallicities ranging from Z = 0.0001 to Z = 0.070. We also consider the evolution of the habitable zone from the pre-main sequence until the asymptotic giant branch is reached. We find that metallicity strongly affects the duration of the habitable zone for a planet as well as the distance from the host star where the duration is maximized. For a 1.0 M ⊙ star with near solar metallicity, Z = 0.017, the duration of the habitable zone is >10 Gyr at distances 1.2-2.0 AU from the star, whereas the duration is >20 Gyr for high-metallicity stars (Z = 0.070) at distances of 0.7-1.8 AU, and ~4 Gyr at distances of 1.8-3.3 AU for low-metallicity stars (Z = 0.0001). Corresponding results have been obtained for stars of 1.5 and 2.0 solar masses.

  17. EFFECT OF METALLICITY ON THE EVOLUTION OF THE HABITABLE ZONE FROM THE PRE-MAIN SEQUENCE TO THE ASYMPTOTIC GIANT BRANCH AND THE SEARCH FOR LIFE

    SciTech Connect

    Danchi, William C.; Lopez, Bruno E-mail: bruno.lopez@oca.eu

    2013-05-20

    During the course of stellar evolution, the location and width of the habitable zone changes as the luminosity and radius of the star evolves. The duration of habitability for a planet located at a given distance from a star is greatly affected by the characteristics of the host star. A quantification of these effects can be used observationally in the search for life around nearby stars. The longer the duration of habitability, the more likely it is that life has evolved. The preparation of observational techniques aimed at detecting life would benefit from the scientific requirements deduced from the evolution of the habitable zone. We present a study of the evolution of the habitable zone around stars of 1.0, 1.5, and 2.0 M{sub Sun} for metallicities ranging from Z = 0.0001 to Z = 0.070. We also consider the evolution of the habitable zone from the pre-main sequence until the asymptotic giant branch is reached. We find that metallicity strongly affects the duration of the habitable zone for a planet as well as the distance from the host star where the duration is maximized. For a 1.0 M{sub Sun} star with near solar metallicity, Z = 0.017, the duration of the habitable zone is >10 Gyr at distances 1.2-2.0 AU from the star, whereas the duration is >20 Gyr for high-metallicity stars (Z = 0.070) at distances of 0.7-1.8 AU, and {approx}4 Gyr at distances of 1.8-3.3 AU for low-metallicity stars (Z = 0.0001). Corresponding results have been obtained for stars of 1.5 and 2.0 solar masses.

  18. ADVANCED REACTIVITY MEASUREMENT FACILITY, TRA660, INTERIOR. REACTOR INSIDE TANK. METAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ADVANCED REACTIVITY MEASUREMENT FACILITY, TRA-660, INTERIOR. REACTOR INSIDE TANK. METAL WORK PLATFORM ABOVE. THE REACTOR WAS IN A SMALL WATER-FILLED POOL. INL NEGATIVE NO. 66-6373. Unknown Photographer, ca. 1966 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  19. Laboratory Demonstrations for PDE and Metals Combustion at NASA MSFC's Advanced Propulsion Laboratory

    NASA Technical Reports Server (NTRS)

    2000-01-01

    Report provides status reporting on activities under order no. H-30549 for the period December 1 through December 31, 1999. Details the activities of the contract in the coordination of planned conduct of experiments at the MSFC Advanced Propulsion Laboratory in pulse detonation MHD power production and metals combustion.

  20. Advanced Gasification Mercury/Trace Metal Control with Monolith Traps

    SciTech Connect

    Michael L. Swanson; Grant E. Dunham; Mark A. Musich

    2007-02-01

    Three potential additives for controlling mercury emissions from syngas at temperatures ranging from 350 to 500 F (177 to 260 C) were developed. Current efforts are being directed at increasing the effective working temperature for these sorbents and also being able to either eliminate any potential mercury desorption or trying to engineer a trace metal removal system that can utilize the observed desorption process to repeatedly regenerate the same sorbent monolith for extended use. Project results also indicate that one of these same sorbents can also successfully be utilized for arsenic removal. Capture of the hydrogen selenide in the passivated tubing at elevated temperatures has resulted in limited results on the effective control of hydrogen selenide with these current sorbents, although lower-temperature results are promising. Preliminary economic analysis suggests that these Corning monoliths potentially could be more cost-effective than the conventional cold-gas (presulfided activated carbon beds) technology currently being utilized. Recent Hg-loading results might suggest that the annualized costs might be as high as 2.5 times the cost of the conventional technology. However, this annualized cost does not take into account the significantly improved thermal efficiency of any plant utilizing the warm-gas monolith technology currently being developed.

  1. Evolution of thermally pulsing asymptotic giant branch stars. IV. Constraining mass loss and lifetimes of low mass, low metallicity AGB stars

    SciTech Connect

    Rosenfield, Philip; Dalcanton, Julianne J.; Weisz, Daniel; Williams, Benjamin F.; Marigo, Paola; Girardi, Léo; Gullieuszik, Marco; Bressan, Alessandro; Dolphin, Andrew; Aringer, Bernhard

    2014-07-20

    The evolution and lifetimes of thermally pulsating asymptotic giant branch (TP-AGB) stars suffer from significant uncertainties. In this work, we analyze the numbers and luminosity functions of TP-AGB stars in six quiescent, low metallicity ([Fe/H] ≲ –0.86) galaxies taken from the ACS Nearby Galaxy Survey Treasury sample, using Hubble Space Telescope (HST) photometry in both optical and near-infrared filters. The galaxies contain over 1000 TP-AGB stars (at least 60 per field). We compare the observed TP-AGB luminosity functions and relative numbers of TP-AGB and red giant branch (RGB) stars, N{sub TP-AGB}/N{sub RGB}, to models generated from different suites of TP-AGB evolutionary tracks after adopting star formation histories derived from the HST deep optical observations. We test various mass-loss prescriptions that differ in their treatments of mass loss before the onset of dust-driven winds (pre-dust). These comparisons confirm that pre-dust mass loss is important, since models that neglect pre-dust mass loss fail to explain the observed N{sub TP-AGB}/N{sub RGB} ratio or the luminosity functions. In contrast, models with more efficient pre-dust mass loss produce results consistent with observations. We find that for [Fe/H] ≲ –0.86, lower mass TP-AGB stars (M ≲ 1 M{sub ☉}) must have lifetimes of ∼0.5 Myr and higher masses (M ≲ 3 M{sub ☉}) must have lifetimes ≲ 1.2 Myr. In addition, assuming our best-fitting mass-loss prescription, we show that the third dredge-up has no significant effect on TP-AGB lifetimes in this mass and metallicity range.

  2. Nanostructured metal oxide-based materials as advanced anodes for lithium-ion batteries.

    PubMed

    Wu, Hao Bin; Chen, Jun Song; Hng, Huey Hoon; Lou, Xiong Wen David

    2012-04-21

    The search for new electrode materials for lithium-ion batteries (LIBs) has been an important way to satisfy the ever-growing demands for better performance with higher energy/power densities, improved safety and longer cycle life. Nanostructured metal oxides exhibit good electrochemical properties, and they are regarded as promising anode materials for high-performance LIBs. In this feature article, we will focus on three different categories of metal oxides with distinct lithium storage mechanisms: tin dioxide (SnO(2)), which utilizes alloying/dealloying processes to reversibly store/release lithium ions during charge/discharge; titanium dioxide (TiO(2)), where lithium ions are inserted/deinserted into/out of the TiO(2) crystal framework; and transition metal oxides including iron oxide and cobalt oxide, which react with lithium ions via an unusual conversion reaction. For all three systems, we will emphasize that creating nanomaterials with unique structures could effectively improve the lithium storage properties of these metal oxides. We will also highlight that the lithium storage capability can be further enhanced through designing advanced nanocomposite materials containing metal oxides and other carbonaceous supports. By providing such a rather systematic survey, we aim to stress the importance of proper nanostructuring and advanced compositing that would result in improved physicochemical properties of metal oxides, thus making them promising negative electrodes for next-generation LIBs.

  3. Recent Advances in Atomic Metal Doping of Carbon-based Nanomaterials for Energy Conversion.

    PubMed

    Bayatsarmadi, Bita; Zheng, Yao; Vasileff, Anthony; Qiao, Shi-Zhang

    2017-04-12

    Nanostructured metal-contained catalysts are one of the most widely used types of catalysts applied to facilitate some of sluggish electrochemical reactions. However, the high activity of these catalysts cannot be sustained over a variety of pH ranges. In an effort to develop highly active and stable metal-contained catalysts, various approaches have been pursued with an emphasis on metal particle size reduction and doping on carbon-based supports. These techniques enhances the metal-support interactions, originating from the chemical bonding effect between the metal dopants and carbon support and the associated interface, as well as the charge transfer between the atomic metal species and carbon framework. This provides an opportunity to tune the well-defined metal active centers and optimize their activity, selectivity and stability of this type of (electro)catalyst. Herein, recent advances in synthesis strategies, characterization and catalytic performance of single atom metal dopants on carbon-based nanomaterials are highlighted with attempts to understand the electronic structure and spatial arrangement of individual atoms as well as their interaction with the supports. Applications of these new materials in a wide range of potential electrocatalytic processes in renewable energy conversion systems are also discussed with emphasis on future directions in this active field of research.

  4. Investigation of novel electrolyte systems for advanced metal/air batteries and fuel cells

    NASA Astrophysics Data System (ADS)

    Ye, Hui

    It is a worldwide challenge to develop advanced green power sources for modern portable devices, transportation and stationary power generation. Metal/air batteries and fuel cells clearly stand out in view of their high specific energy, high energy efficiency and environment-friendliness. Advanced metal/air batteries based on metal ion conductors and proton exchange membrane (PEM) fuel cells operated at elevated temperatures (>120°C) can circumvent the limitations of current technologies and bring considerable advantages. The key is to develop suitable electrolytes to enable these new technologies. In this thesis research, investigation of novel electrolytes systems for advanced metal/air batteries and PEM fuel cells is conducted. Novel polymer gel electrolyte systems, [metal salt/ionic liquid/polymer] and [metal salt/liquid polyether/polymer] are prepared. Such systems contain no volatile solvents, conduct metal ions (Li+ or Zn 2+) with high ionic conductivity, possess wide electrochemical stability windows, and exhibit wide operating temperature ranges. They promise to enable non-aqueous, all-solid-state, thin-film Li/air batteries and Zn/air batteries. They are advantageous for application in other battery systems as well, such as rechargeable lithium and lithium ion batteries. In the case of proton exchange membranes, polymer gel electrolyte systems [acid/ionic liquid/polymer] are prepared. Especially, H3PO4/PMIH2PO 4/PBI is demonstrated as prospective proton exchange membranes for PEM fuel cells operating at elevated temperatures. Comprehensive electrochemical characterization, thermal analysis (TGA and DSC) and spectroscopy analysis (NMR and FTIR) are carried out to investigate these novel electrolyte systems and their ion transport mechanisms. The design and synthesis of novel ionic liquids and electrolyte systems based on them for advantageous application in various electrochemical power sources are highlighted in this work.

  5. EUROPIUM s-PROCESS SIGNATURE AT CLOSE-TO-SOLAR METALLICITY IN STARDUST SiC GRAINS FROM ASYMPTOTIC GIANT BRANCH STARS

    SciTech Connect

    Avila, Janaina N.; Ireland, Trevor R.; Holden, Peter; Lugaro, Maria; Gyngard, Frank; Zinner, Ernst; Cristallo, Sergio; Rauscher, Thomas

    2013-05-01

    Individual mainstream stardust silicon carbide (SiC) grains and a SiC-enriched bulk sample from the Murchison carbonaceous meteorite have been analyzed by the Sensitive High Resolution Ion Microprobe-Reverse Geometry for Eu isotopes. The mainstream grains are believed to have condensed in the outflows of {approx}1.5-3 M{sub Sun} carbon-rich asymptotic giant branch (AGB) stars with close-to-solar metallicity. The {sup 151}Eu fractions [fr({sup 151}Eu) = {sup 151}Eu/({sup 151}Eu+{sup 153}Eu)] derived from our measurements are compared with previous astronomical observations of carbon-enhanced metal-poor stars enriched in elements made by slow neutron captures (the s-process). Despite the difference in metallicity between the parent stars of the grains and the metal-poor stars, the fr({sup 151}Eu) values derived from our measurements agree well with fr({sup 151}Eu) values derived from astronomical observations. We have also compared the SiC data with theoretical predictions of the evolution of Eu isotopic ratios in the envelope of AGB stars. Because of the low Eu abundances in the SiC grains, the fr({sup 151}Eu) values derived from our measurements show large uncertainties, in most cases being larger than the difference between solar and predicted fr({sup 151}Eu) values. The SiC aggregate yields a fr({sup 151}Eu) value within the range observed in the single grains and provides a more precise result (fr({sup 151}Eu) = 0.54 {+-} 0.03, 95% conf.), but is approximately 12% higher than current s-process predictions. The AGB models can match the SiC data if we use an improved formalism to evaluate the contribution of excited nuclear states in the calculation of the {sup 151}Sm(n, {gamma}) stellar reaction rate.

  6. Recent advances in DNA-based electrochemical biosensors for heavy metal ion detection: A review.

    PubMed

    Saidur, M R; Aziz, A R Abdul; Basirun, W J

    2017-04-15

    The presence of heavy metal in food chains due to the rapid industrialization poses a serious threat on the environment. Therefore, detection and monitoring of heavy metals contamination are gaining more attention nowadays. However, the current analytical methods (based on spectroscopy) for the detection of heavy metal contamination are often very expensive, tedious and can only be handled by trained personnel. DNA biosensors, which are based on electrochemical transduction, is a sensitive but inexpensive method of detection. The principles, sensitivity, selectivity and challenges of electrochemical biosensors are discussed in this review. This review also highlights the major advances of DNA-based electrochemical biosensors for the detection of heavy metal ions such as Hg(2+), Ag(+), Cu(2+) and Pb(2+).

  7. Summary of advanced LMR (Liquid Metal Reactor) evaluations: PRISM (Power Reactor Inherently Safe Module) and SAFR (Sodium Advanced Fast Reactor)

    SciTech Connect

    Van Tuyle, G.J.; Slovik, G.C.; Chan, B.C.; Kennett, R.J.; Cheng, H.S.; Kroeger, P.G. )

    1989-10-01

    In support of the US Nuclear Regulatory Commission (NRC), Brookhaven National Laboratory (BNL) has performed independent analyses of two advanced Liquid Metal Reactor (LMR) concepts. The designs, sponsored by the US Department of Energy (DOE), the Power Reactor Inherently Safe Module (PRISM) (Berglund, 1987) and the Sodium Advanced Fast Reactor (SAFR) (Baumeister, 1987), were developed primarily by General Electric (GE) and Rockwell International (RI), respectively. Technical support was provided to DOE, RI, and GE, by the Argonne National Laboratory (ANL), particularly with respect to the characteristics of the metal fuels. There are several examples in both PRISM and SAFR where inherent or passive systems provide for a safe response to off-normal conditions. This is in contrast to the engineered safety systems utilized on current US Light Water Reactor (LWR) designs. One important design inherency in the LMRs is the inherent shutdown'', which refers to the tendency of the reactor to transition to a much lower power level whenever temperatures rise significantly. This type of behavior was demonstrated in a series of unscrammed tests at EBR-II (NED, 1986). The second key design feature is the passive air cooling of the vessel to remove decay heat. These systems, designated RVACS in PRISM and RACS in SAFR, always operate and are believed to be able to prevent core damage in the event that no other means of heat removal is available. 27 refs., 78 figs., 3 tabs.

  8. THE DUST BUDGET OF THE SMALL MAGELLANIC CLOUD: ARE ASYMPTOTIC GIANT BRANCH STARS THE PRIMARY DUST SOURCE AT LOW METALLICITY?

    SciTech Connect

    Boyer, M. L.; Gordon, K. D.; Meixner, M.; Sargent, B. A.; Srinivasan, S.; Riebel, D.; McDonald, I.; Van Loon, J. Th.; Clayton, G. C.; Sloan, G. C.

    2012-03-20

    We estimate the total dust input from the cool evolved stars in the Small Magellanic Cloud, using the 8 {mu}m excess emission as a proxy for the dust-production rate (DPR). We find that asymptotic giant branch (AGB) and red supergiant (RSG) stars produce (8.6-9.5) Multiplication-Sign 10{sup -7} M{sub Sun} yr{sup -1} of dust, depending on the fraction of far-infrared sources that belong to the evolved star population (with 10%-50% uncertainty in individual DPRs). RSGs contribute the least (<4%), while carbon-rich AGB stars (especially the so-called extreme AGB stars) account for 87%-89% of the total dust input from cool evolved stars. We also estimate the dust input from hot stars and supernovae (SNe), and find that if SNe produce 10{sup -3} M{sub Sun} of dust each, then the total SN dust input and AGB input are roughly equivalent. We consider several scenarios of SN dust production and destruction and find that the interstellar medium (ISM) dust can be accounted for solely by stellar sources if all SNe produce dust in the quantities seen around the dustiest examples and if most SNe explode in dense regions where much of the ISM dust is shielded from the shocks. We find that AGB stars contribute only 2.1% of the ISM dust. Without a net positive contribution from SNe to the dust budget, this suggests that dust must grow in the ISM or be formed by another unknown mechanism.

  9. Damage Tolerance Assessment Branch

    NASA Technical Reports Server (NTRS)

    Walker, James L.

    2013-01-01

    The Damage Tolerance Assessment Branch evaluates the ability of a structure to perform reliably throughout its service life in the presence of a defect, crack, or other form of damage. Such assessment is fundamental to the use of structural materials and requires an integral blend of materials engineering, fracture testing and analysis, and nondestructive evaluation. The vision of the Branch is to increase the safety of manned space flight by improving the fracture control and the associated nondestructive evaluation processes through development and application of standards, guidelines, advanced test and analytical methods. The Branch also strives to assist and solve non-aerospace related NDE and damage tolerance problems, providing consultation, prototyping and inspection services.

  10. Polymer, metal, and ceramic matrix composites for advanced aircraft engine applications

    SciTech Connect

    Mc Daniels, D.L.; Serafini, T.T.; Di Carlo, J.A.

    1986-06-01

    Advanced aircraft engine research within NASA Lewis focuses on propulsion systems for subsonic, supersonic, and hypersonic aircraft. Each of these flight regimes requires different types of engines, but all require advanced materials to meet their goals of performance, thrust-to-weight ratio, and fuel efficiency. The high strength/weight and stiffness/weight properties of resin, metal, and ceramic matrix composites will play an increasingly key role in meeting these performance requirements. At NASA Lewis, research is ongoing to apply graphite/polyimide composites to engine components and to develop polymer matrices with higher operating temperature capabilities. Metal matrix composites, using magnesium, aluminum, titanium, and superalloy matrices, are being developed for application to static and rotating engine components, as well as for space applications, over a broad temperature range. Ceramic matrix composites are also being examined to increase the toughness and reliability of ceramics for application to high-temperature engine structures and components.

  11. Reference site selection report for the advanced liquid metal reactor at the Idaho National Engineering Laboratory

    SciTech Connect

    Sivill, R.L.

    1990-03-01

    This Reference Site Selection Report was prepared by EG G, Idaho Inc., for General Electric (GE) to provide information for use by the Department of Energy (DOE) in selecting a Safety Test Site for an Advanced Liquid Metal Reactor. Similar Evaluation studies are planned to be conducted at other potential DOE sites. The Power Reactor Innovative Small Module (PRISM) Concept was developed for ALMR by GE. A ALMR Safety Test is planned to be performed on a DOE site to demonstrate features and meet Nuclear Regulatory Commission Requirements. This study considered possible locations at the Idaho National Engineering Laboratory that met the ALMR Prototype Site Selection Methodology and Criteria. Four sites were identified, after further evaluation one site was eliminated. Each of the remaining three sites satisfied the criteria and was graded. The results were relatively close. Thus concluding that the Idaho National Engineering Laboratory is a suitable location for an Advanced Liquid Metal Reactor Safety Test. 23 refs., 13 figs., 9 tabs.

  12. Performance analysis of a mixed nitride fuel system for an advanced liquid metal reactor

    SciTech Connect

    Lyon, W.F.; Baker, R.B.; Leggett, R.D.

    1990-11-01

    The conceptual development and analysis of a proposed mixed nitride driver and blanket fuel system for a prototypic advanced liquid metal reactor design has been performed. As a first step, an intensive literature survey was completed on the development and testing of nitride fuel systems. Based on the results of this survey, prototypic mixed nitride fuel and blanket pins were designed and analyzed using the SIEX computer code. The analysis predicted that the nitride fuel consistently operated at peak temperatures and cladding strain levels that compared quite favorably with competing fuel designs. These results, along with data available in the literature on nitride fuel performance, indicate that a nitride fuel system should offer enhanced capabilities for advanced liquid metal reactors. 13 refs., 10 figs., 2 tabs.

  13. Branching Morphogenesis

    PubMed Central

    Horowitz, Arie; Simons, Michael

    2009-01-01

    Tubular structures are a fundamental anatomical theme recurring in a wide range of animal species. In mammals, tubulogenesis underscores the development of several systems and organs, including the vascular system, the lungs, and the kidneys. All tubular systems are hierarchical, branching into segments of gradually diminishing diameter. There are only two cell types that form the lumen of tubular systems – either endothelial cells in the vascular system, or epithelial cells in all other organs. The most important feature in determining the morphology of the tubular systems is the frequency and geometry of branching. Hence, deciphering the molecular mechanisms underlying the sprouting of new branches from pre-existing ones is the key to understanding the formation of tubular systems. The morphological similarity between the various tubular systems is underscored by similarities between the signaling pathways which control their branching. A prominent feature common to these pathways is their duality – an agonist counterbalanced by an inhibitor. The formation of the tracheal system in Drosophila melanogaster is driven by fibroblast growth factor (FGF) and inhibited by Sprouty/Notch. In vertebrates, the analogous pathways are FGF and transforming growth factor β in epithelial tubular systems, or vascular endothelial growth factor and Notch in the vascular system. PMID:19179661

  14. High performance fibers for structurally reliable metal and ceramic composites. [advanced gas turbine engine materials

    NASA Technical Reports Server (NTRS)

    Dicarlo, J. A.

    1984-01-01

    Very few of the commercially available high performance fibers with low densities, high Young's moduli, and high tensile strengths possess all the necessary property requirements for providing either metal matrix composites (MMC) or ceramic matrix composites (CMC) with high structural reliability. These requirements are discussed in general and examples are presented of how these property guidelines are influencing fiber evaluation and improvement studies at NASA aimed at developing structurally reliable MMC and CMC for advanced gas turbine engines.

  15. Involvement of Programmed Cell Death in Neurotoxicity of Metallic Nanoparticles: Recent Advances and Future Perspectives

    NASA Astrophysics Data System (ADS)

    Song, Bin; Zhou, Ting; Liu, Jia; Shao, LongQuan

    2016-11-01

    The widespread application of metallic nanoparticles (NPs) or NP-based products has increased the risk of exposure to NPs in humans. The brain is an important organ that is more susceptible to exogenous stimuli. Moreover, any impairment to the brain is irreversible. Recently, several in vivo studies have found that metallic NPs can be absorbed into the animal body and then translocated into the brain, mainly through the blood-brain barrier and olfactory pathway after systemic administration. Furthermore, metallic NPs can cross the placental barrier to accumulate in the fetal brain, causing developmental neurotoxicity on exposure during pregnancy. Therefore, metallic NPs become a big threat to the brain. However, the mechanisms underlying the neurotoxicity of metallic NPs remain unclear. Programmed cell death (PCD), which is different from necrosis, is defined as active cell death and is regulated by certain genes. PCD can be mainly classified into apoptosis, autophagy, necroptosis, and pyroptosis. It is involved in brain development, neurodegenerative disorders, psychiatric disorders, and brain injury. Given the pivotal role of PCD in neurological functions, we reviewed relevant articles and tried to summarize the recent advances and future perspectives of PCD involvement in the neurotoxicity of metallic NPs, with the purpose of comprehensively understanding the neurotoxic mechanisms of NPs.

  16. Constructing 3D branched nanowire coated macroporous metal oxide electrodes with homogeneous or heterogeneous compositions for efficient solar cells.

    PubMed

    Wu, Wu-Qiang; Xu, Yang-Fan; Rao, Hua-Shang; Feng, Hao-Lin; Su, Cheng-Yong; Kuang, Dai-Bin

    2014-05-05

    Light-harvesting and charge collection have attracted increasing attention in the domain of photovoltaic cells, and can be facilitated dramatically by appropriate design of a photonic nanostructure. However, the applicability of current light-harvesting photoanode materials with single component and/or morphology (such as, particles, spheres, wires, sheets) is still limited by drawbacks such as insufficient electron-hole separation and/or light-trapping. Herein, we introduce a universal method to prepare hierarchical assembly of macroporous material-nanowire coated homogenous or heterogeneous metal oxide composite electrodes (TiO2 -TiO2 , SnO2 -TiO2 , and Zn2 SnO4 -TiO2 ; homogenous refers to a material in which the nanowire and the macroporous material have the same composition, i.e. both are TiO2 . Heterogeneous refers to a material in which the nanowires and the macroporous material have different compositions). The dye-sensitized solar cell based on a TiO2 -macroporous material-TiO2 -nanowire homogenous composition electrode shows an impressive conversion efficiency of 9.51 %, which is much higher than that of pure macroporous material-based photoelectrodes to date.

  17. Advanced Electrochemistry of Individual Metal Clusters Electrodeposited Atom by Atom to Nanometer by Nanometer.

    PubMed

    Kim, Jiyeon; Dick, Jeffrey E; Bard, Allen J

    2016-11-15

    Metal clusters are very important as building blocks for nanoparticles (NPs) for electrocatalysis and electroanalysis in both fundamental and applied electrochemistry. Attention has been given to understanding of traditional nucleation and growth of metal clusters and to their catalytic activities for various electrochemical applications in energy harvesting as well as analytical sensing. Importantly, understanding the properties of these clusters, primarily the relationship between catalysis and morphology, is required to optimize catalytic function. This has been difficult due to the heterogeneities in the size, shape, and surface properties. Thus, methods that address these issues are necessary to begin understanding the reactivity of individual catalytic centers as opposed to ensemble measurements, where the effect of size and morphology on the catalysis is averaged out in the measurement. This Account introduces our advanced electrochemical approaches to focus on each isolated metal cluster, where we electrochemically fabricated clusters or NPs atom by atom to nanometer by nanometer and explored their electrochemistry for their kinetic and catalytic behavior. Such approaches expand the dimensions of analysis, to include the electrochemistry of (1) a discrete atomic cluster, (2) solely a single NP, or (3) individual NPs in the ensemble sample. Specifically, we studied the electrocatalysis of atomic metal clusters as a nascent electrocatalyst via direct electrodeposition on carbon ultramicroelectrode (C UME) in a femtomolar metal ion precursor. In addition, we developed tunneling ultramicroelectrodes (TUMEs) to study electron transfer (ET) kinetics of a redox probe at a single metal NP electrodeposited on this TUME. Owing to the small dimension of a NP as an active area of a TUME, extremely high mass transfer conditions yielded a remarkably high standard ET rate constant, k(0), of 36 cm/s for outer-sphere ET reaction. Most recently, we advanced nanoscale

  18. Fault Branching

    NASA Astrophysics Data System (ADS)

    Dmowska, R.; Rice, J. R.; Poliakov, A. N.

    2001-12-01

    Theoretical stress analysis for a propagating shear rupture suggests that the propensity of the rupture path to branch is determined by rupture speed and by the preexisting stress state. See Poliakov, Dmowska and Rice (JGR, submitted April 2001, URL below). Deviatoric stresses near a mode II rupture tip are found to be much higher to both sides of the fault plane than directly ahead, when rupture speed becomes close to the Rayleigh speed. However, the actual pattern of predicted Coulomb failure on secondary faults is strongly dependent on the angle between the fault and the direction of maximum compression Smax in the pre-stress field. Steep Smax angles lead to more extensive failure on the extensional side, whereas shallow angles give comparable failure regions on both. Here we test such concepts against natural examples. For crustal thrust faults we may assume that Smax is horizontal. Thus nucleation on a steeply dipping plane, like the 53 ° dip for the 1971 San Fernando earthquake, is consistent with rupture path kinking to the extensional side, as inferred. Nucleation on a shallow dip, like for the 12 ° -18 ° of the 1985 Kettleman Hills event, should activate both sides, as seems consistent with aftershock patterns. Similarly, in a strike slip example, Smax is inferred to be at approximately 60 ° with the Johnson Valley fault where it branched to the extensional side onto the Landers-Kickapoo fault in the 1992 event, and this too is consistent. Further, geological examination of the activation of secondary fault features along the Johnson Valley fault and the Homestead Valley fault consistently shows that most activity occurs on the extensional side. Another strike-slip example is the Imperial Valley 1979 earthquake. The approximate Smax direction is north-south, at around 35 ° with the main fault, where it branched, on the extensional side, onto Brawley fault, again interpretable with the concepts developed.

  19. Orthogonal Metal Cutting Simulation Using Advanced Constitutive Equations with Damage and Fully Adaptive Numerical Procedure

    NASA Astrophysics Data System (ADS)

    Saanouni, Kkemais; Labergère, Carl; Issa, Mazen; Rassineux, Alain

    2010-06-01

    This work proposes a complete adaptive numerical methodology which uses `advanced' elastoplastic constitutive equations coupling: thermal effects, large elasto-viscoplasticity with mixed non linear hardening, ductile damage and contact with friction, for 2D machining simulation. Fully coupled (strong coupling) thermo-elasto-visco-plastic-damage constitutive equations based on the state variables under large plastic deformation developed for metal forming simulation are presented. The relevant numerical aspects concerning the local integration scheme as well as the global resolution strategy and the adaptive remeshing facility are briefly discussed. Applications are made to the orthogonal metal cutting by chip formation and segmentation under high velocity. The interactions between hardening, plasticity, ductile damage and thermal effects and their effects on the adiabatic shear band formation including the formation of cracks are investigated.

  20. TREATMENT OF METAL-LADEN HAZARDOUS WASTES WITH ADVANCED CLEAN COAL TECHNOLOGY BY-PRODUCTS

    SciTech Connect

    James T. Cobb, Jr.

    2003-09-12

    Metal-laden wastes can be stabilized and solidified using advanced clean coal technology by-products (CCTBs)--fluid bed combustor ash and spray drier solids. These utility-generated treatment chemicals are available for purchase through brokers, and commercial applications of this process are being practiced by treaters of metal-laden hazardous waste. A complex of regulations governs this industry, and sensitivities to this complex has discouraged public documentation of treatment of metal-laden hazardous wastes with CCTBs. This report provides a comprehensive public documentation of laboratory studies that show the efficacy of the stabilization and solidification of metal-laden hazardous wastes--such as lead-contaminated soils and sandblast residues--through treatment with CCTBs. It then describes the extensive efforts that were made to obtain the permits allowing a commercial hazardous waste treater to utilize CCTBs as treatment chemicals and to install the equipment required to do so. It concludes with the effect of this lengthy process on the ability of the treatment company to realize the practical, physical outcome of this effort, leading to premature termination of the project.

  1. Robust Joining and Integration Technologies for Advanced Metallic, Ceramic, and Composite Systems

    NASA Technical Reports Server (NTRS)

    Singh, M.; Shpargel, Tarah; Morscher, Gregory N.; Halbig, Michael H.; Asthana, Rajiv

    2006-01-01

    Robust integration and assembly technologies are critical for the successful implementation of advanced metallic, ceramic, carbon-carbon, and ceramic matrix composite components in a wide variety of aerospace, space exploration, and ground based systems. Typically, the operating temperature of these components varies from few hundred to few thousand Kelvin with different working times (few minutes to years). The wide ranging system performance requirements necessitate the use of different integration technologies which includes adhesive bonding, low temperature soldering, active metal brazing, diffusion bonding, ARCJoinT, and ultra high temperature joining technologies. In this presentation, a number of joining examples and test results will be provided related to the adhesive bonding and active metal brazing of titanium to C/C composites, diffusion bonding of silicon carbide to silicon carbide using titanium interlayer, titanium and hastelloy brazing to silicon carbide matrix composites, and ARCJoinT joining of SiC ceramics and SiC matrix composites. Various issues in the joining of metal-ceramic systems including thermal expansion mismatch and resulting residual stresses generated during joining will be discussed. In addition, joint design and testing issues for a wide variety of joints will be presented.

  2. TREATMENT OF METAL-LADEN HAZARDOUS WASTES WITH ADVANCED CLEAN COAL TECHNOLOGY BY-PRODUCTS

    SciTech Connect

    James T. Cobb, Jr.; Ronald D. Neufeld; Jana Agostini

    1999-05-11

    This fifteenth quarterly report describes work done during the fifteenth three-month period of the University of Pittsburgh's project on the ''Treatment of Metal-Laden Hazardous Wastes with Advanced Clean Coal Technology By-Products.'' This report describes the activities of the project team during the reporting period. The principal work has focused upon new laboratory evaluation of samples from Phase 1, discussions with MAX Environmental Technologies, Inc., on the field work of Phase 2, preparing and giving presentations, and making and responding to several outside contacts.

  3. TREATMENT OF METAL-LADEN HAZARDOUS WASTES WITH ADVANCED CLEAN COAL TECHNOLOGY BY-PRODUCTS

    SciTech Connect

    James T. Cobb, Jr.; Ronald D. Neufeld; Jana Agostini

    1999-01-01

    This seventeenth quarterly report describes work done during the seventeenth three-month period of the University of Pittsburgh's project on the ''Treatment of Metal-Laden Hazardous Wastes with Advanced Clean Coal Technology By-Products.'' This report describes the activities of the project team during the reporting period. The principal work has focused upon new laboratory evaluation of samples from Phase 1, discussions with MAX Environmental Technologies, Inc., on the field work of Phase 2, giving a presentation, submitting a manuscript and making and responding to one outside contact.

  4. TREATMENT OF METAL-LADEN HAZARDOUS WASTES WITH ADVANCED CLEAN COAL TECHNOLOGY BY-PRODUCTS

    SciTech Connect

    James T. Cobb, Jr.; Ronald D. Neufeld; Jana Agostini

    1999-06-01

    This sixteenth quarterly report describes work done during the sixteenth three-month period of the University of Pittsburgh's project on the ''Treatment of Metal-Laden Hazardous Wastes with Advanced Clean Coal Technology By-Products.'' This report describes the activities of the project team during the reporting period. The principal work has focused upon new laboratory evaluation of samples from Phase 1, discussions with MAX Environmental Technologies, Inc., on the field work of Phase 2, giving a presentation, and making and responding to several outside contacts.

  5. Treatment of metal-laden hazardous wastes with advanced Clean Coal Technology by-products

    SciTech Connect

    James T. Cobb, Jr.; Ronald D. Neufeld; Jana Agostini

    1999-04-12

    This twelfth quarterly report describes work done during the twelfth three-month period of the University of Pittsburgh's project on the ``Treatment of Metal-Laden Hazardous Wastes with Advanced Clean Coal Technology By-Products.'' This report describes the activities of the project team during the reporting period. The principal work has focused upon new laboratory evaluation of samples from Phase 1, discussions with MAX Environmental Technologies, Inc., on the field work of Phase 2, preparing and giving presentations, and making and responding to a number of outside contacts.

  6. Advanced Numerical methods for F. E. Simulation of Metal Forming Processes

    NASA Astrophysics Data System (ADS)

    Chenot, Jean-Loup; Bernacki, Marc; Fourment, Lionel; Ducloux, Richard

    2010-06-01

    The classical scientific basis for finite element modeling of metal forming processes is first recalled. Several developments in advanced topics are summarized: adaptive and anisotropic remeshing, parallel solving, multi material deformation. More recent researches in numerical analysis are outlined, including multi grid and multi mesh methods, mainly devoted to decrease computation time, automatic optimization method for faster and more effective design of forming processes. The link of forming simulation and structural computations is considered with emphasis on the necessity to predict the final mechanical properties. Finally a brief account of computation at the micro scale level is given.

  7. Safety aspects of the US advanced LMR (liquid metal reactor) design

    SciTech Connect

    Pedersen, D.R.; Gyorey, G.L.; Marchaterre, J.F.; Rosen, S.; General Electric Co., San Jose, CA; Argonne National Lab., IL; USDOE Assistant Secretary for Nuclear Energy, Washington, DC )

    1989-01-01

    The cornerstones of the United States Advanced Liquid Metal Cooled Reactor (ALMR) program sponsored by the Department of Energy are: the plant design program at General Electric based on the PRISM (Power Reactor Innovative Small Module) concept, and the Integral Fast Reactor program (IFR) at Argonne National Laboratory (ANL). The goal of the US program is to produce a standard, commercial ALMR, including the associated fuel cycle. This paper discusses the US regulatory framework for design of an ALMR, safety aspects of the IFR program at ANL, the IFR fuel cycle and actinide recycle, and the ALMR plant design program at GE. 6 refs., 5 figs.

  8. Treatment of metal-laden hazardous wastes with advanced Clean Coal Technology by-products

    SciTech Connect

    James T. Cobb, Jr.; Ronald D. Neufeld; Jana Agostini; Wiles Elder

    1999-04-05

    This eleventh quarterly report describes work done during the eleventh three-month period of the University of Pittsburgh's project on the ``Treatment of Metal-Laden Hazardous Wastes with Advanced Clean Coal Technology By-Products.'' This report describes the activities of the project team during the reporting period. The principal work has focused upon new laboratory evaluation of samples from Phase 1, discussions with MAX Environmental Technologies, Inc., on the field work of Phase 2, preparing and giving presentations, and making and responding to two outside contacts.

  9. TREATMENT OF METAL-LADEN HAZARDOUS WASTES WITH ADVANCED CLEAN COAL TECHNOLOGY BY-PRODUCTS

    SciTech Connect

    James T. Cobb, Jr.; Ronald D. Neufeld; Jana Agostini

    1999-05-10

    This fourteenth quarterly report describes work done during the fourteenth three-month period of the University of Pittsburgh's project on the ''Treatment of Metal-Laden Hazardous Wastes with Advanced Clean Coal Technology By-Products.'' This report describes the activities of the project team during the reporting period. The principal work has focused upon new laboratory evaluation of samples from Phase 1, discussions with MAX Environmental Technologies, Inc., on the field work of Phase 2, preparing presentations, and making and responding to two outside contacts.

  10. Dilated cardiomyopathy and left bundle branch block associated with ingestion of colloidal gold and silver is reversed by British antiLewisite and vitamin E: the potential toxicity of metals used as health supplements.

    PubMed

    Archer, Stephen Lawrence

    2008-05-01

    A case of left bundle branch block and a dilated, nonhypertrophic cardiomyopathy associated with ingestion of colloidal gold and silver as an 'energy tonic' is described. The cardiac disease was reversed within two months by a course of dimercaprol (Akorn Inc, USA) (British antiLewisite) and vitamin E. This is the first case of gold and silver cardiomyopathy in humans, and highlights the risks of these colloidal metal 'health supplements'.

  11. Advanced use of high-performance liquid chromatography for synthesis of controlled metal clusters

    NASA Astrophysics Data System (ADS)

    Niihori, Yoshiki; Matsuzaki, Miku; Uchida, Chihiro; Negishi, Yuichi

    2014-06-01

    Because the synthesis of metal clusters with multiple ligand types results in a distribution of ligands, high-resolution separation of each unique cluster from the mixture is required for precise control of the ligand composition. Reverse-phase high-performance liquid chromatography combined with appropriate transitioning of the mobile phase composition is an extremely effective means of separating ligand combinations when working with metal clusters protected by two different types of thiolates. We report herein advanced use of this method. The studies involving Au24Pd(SR1)18-x(SR2)x and Au24Pd(SR1)18-x(SeR2)x (SR1, SR2 = thiolate, SeR2 = selenolate) revealed the following. (1) In general, an increase in the difference between the polarities of the functional groups incorporated in the two types of ligands improves the separation resolution. A suitable ligand combination for separation can be predicted from the retention times of Au24Pd(SR1)18 and Au24Pd(SR2)18, which cause the terminal peaks in a series of peaks. (2) The use of a step-gradient program during the mobile phase substitution results in improved resolution compared to that achievable with the linear gradients applied in prior work. (3) This technique is also useful for the evaluation of the chemical compositions of metal clusters protected by two different types of ligands with similar molecular weights. These findings will provide clear design guidelines for the functionalization of metal clusters via control of the ligand composition, and will also improve our understanding of the high-resolution isolation of metal clusters.Because the synthesis of metal clusters with multiple ligand types results in a distribution of ligands, high-resolution separation of each unique cluster from the mixture is required for precise control of the ligand composition. Reverse-phase high-performance liquid chromatography combined with appropriate transitioning of the mobile phase composition is an extremely effective

  12. Advanced use of high-performance liquid chromatography for synthesis of controlled metal clusters.

    PubMed

    Niihori, Yoshiki; Matsuzaki, Miku; Uchida, Chihiro; Negishi, Yuichi

    2014-07-21

    Because the synthesis of metal clusters with multiple ligand types results in a distribution of ligands, high-resolution separation of each unique cluster from the mixture is required for precise control of the ligand composition. Reverse-phase high-performance liquid chromatography combined with appropriate transitioning of the mobile phase composition is an extremely effective means of separating ligand combinations when working with metal clusters protected by two different types of thiolates. We report herein advanced use of this method. The studies involving Au₂₄Pd(SR₁)₁₈-x(SR₂)x and Au₂₄Pd(SR₁)₁₈-x(SeR₂)x (SR₁, SR₂ = thiolate, SeR₂ = selenolate) revealed the following. (1) In general, an increase in the difference between the polarities of the functional groups incorporated in the two types of ligands improves the separation resolution. A suitable ligand combination for separation can be predicted from the retention times of Au₂₄Pd(SR₁)₁₈ and Au₂₄Pd(SR₂)₁₈, which cause the terminal peaks in a series of peaks. (2) The use of a step-gradient program during the mobile phase substitution results in improved resolution compared to that achievable with the linear gradients applied in prior work. (3) This technique is also useful for the evaluation of the chemical compositions of metal clusters protected by two different types of ligands with similar molecular weights. These findings will provide clear design guidelines for the functionalization of metal clusters via control of the ligand composition, and will also improve our understanding of the high-resolution isolation of metal clusters.

  13. Stabilization of Heavy Metal Containing Hazardous Wastes with Byproducts from Advanced Clean Coal Technology Systems.

    PubMed

    Pritts, Jesse W; Neufeld, Ronald D; Cobb, James T

    1999-10-01

    The purpose of this investigation was to evaluate the success of residues from advanced Clean Coal Technology (CCT) systems as stabilization agents for heavy metal containing hazardous wastes. In the context examined here, stabilization refers to techniques that reduce the toxicity of a waste by converting the hazardous constituents to a less soluble, mobile, or toxic form.(1) Three advanced CCT byproducts were used: coal waste-fired circulating fluidized bed combustor residue, pressurized fluidized bed combustor residue, and spray drier residue. Seven metal-laden hazardous wastes were treated: three contaminated soils, two air pollution control dusts, wastewater treatment plant sludge, and sandblast waste. Each of the seven hazardous wastes was treated with each of the three CCT byproducts at dosages of 10, 30, and 50% by weight (byproduct:waste). The treatment effectiveness of each mixture was evaluated by the Toxicity Characteristic Leaching Procedure. Of the 63 mixtures evaluated, 21 produced non-hazardous residues. Treatment effectiveness can likely be attributed to mechanisms such as precipitation and encapsulation due to the formation of hydrated calcium silicates and calcium sulfo-alu-minates. Results indicate that these residues have potential beneficial uses to the hazardous waste treatment community, possibly substituting for costly treatment chemicals.

  14. Modeling Constituent Redistribution in U-Pu-Zr Metallic Fuel Using the Advanced Fuel Performance Code BISON

    SciTech Connect

    Douglas Porter; Steve Hayes; Various

    2014-06-01

    The Advanced Fuels Campaign (AFC) metallic fuels currently being tested have higher zirconium and plutonium concentrations than those tested in the past in EBR reactors. Current metal fuel performance codes have limitations and deficiencies in predicting AFC fuel performance, particularly in the modeling of constituent distribution. No fully validated code exists due to sparse data and unknown modeling parameters. Our primary objective is to develop an initial analysis tool by incorporating state-of-the-art knowledge, constitutive models and properties of AFC metal fuels into the MOOSE/BISON (1) framework in order to analyze AFC metallic fuel tests.

  15. The advances of Chinese non-ferrous metal mineral industry and its environmental management

    SciTech Connect

    Miao Zewei; Gao Lin; Zhou Xiaoyuan

    1998-12-31

    With the steady growth of Chinese economy, the nonferrous metal industry of China was also developed quickly. The gross output of ten main nonferrous metals 4.25 million tons in 1995 so that China ranks the fourth in the world. However, a series of environmental problems also occurred, which relate to characteristics of mineral resources, techniques for mining, dressing, smelting and processing, equipment and their management level. The major pollutants include sulphur dioxide, industrial powder-dust and smoke-dust, water containing heavy metal ions as well as solid wastes. Air, water body, soil, vegetation and people`s health were polluted and damaged to different extent due to the above pollutants. For the purpose of environmental management and pollution control, some measures must be taken: (1) to strengthen environmental planning, accelerate and perfect environmental laws and related regulations as well as spread the consciousness of environmental protection energetically; (2) to extend cleaner production and adopt advanced technologies so as to reduce environmental pollution; (3) to turn the concept of the end-of-pipe management to the whole-process control; (4) to recovery or reuse the wastes fully. In addition, general situation and policies on reclamation of mining land as well as theory, methods and techniques of restoration of waste land were also stated in the paper.

  16. Recent Progress in Self‐Supported Metal Oxide Nanoarray Electrodes for Advanced Lithium‐Ion Batteries

    PubMed Central

    Zhang, Feng

    2016-01-01

    The rational design and fabrication of electrode materials with desirable architectures and optimized properties has been demonstrated to be an effective approach towards high‐performance lithium‐ion batteries (LIBs). Although nanostructured metal oxide electrodes with high specific capacity have been regarded as the most promising alternatives for replacing commercial electrodes in LIBs, their further developments are still faced with several challenges such as poor cycling stability and unsatisfying rate performance. As a new class of binder‐free electrodes for LIBs, self‐supported metal oxide nanoarray electrodes have many advantageous features in terms of high specific surface area, fast electron transport, improved charge transfer efficiency, and free space for alleviating volume expansion and preventing severe aggregation, holding great potential to solve the mentioned problems. This review highlights the recent progress in the utilization of self‐supported metal oxide nanoarrays grown on 2D planar and 3D porous substrates, such as 1D and 2D nanostructure arrays, hierarchical nanostructure arrays, and heterostructured nanoarrays, as anodes and cathodes for advanced LIBs. Furthermore, the potential applications of these binder‐free nanoarray electrodes for practical LIBs in full‐cell configuration are outlined. Finally, the future prospects of these self‐supported nanoarray electrodes are discussed. PMID:27711259

  17. Joining and Integration of Advanced Carbon-Carbon Composites to Metallic Systems for Thermal Management Applications

    NASA Technical Reports Server (NTRS)

    Singh, M.; Asthana, R.

    2008-01-01

    Recent research and development activities in joining and integration of carbon-carbon (C/C) composites to metals such as Ti and Cu-clad-Mo for thermal management applications are presented with focus on advanced brazing techniques. A wide variety of carbon-carbon composites with CVI and resin-derived matrices were joined to Ti and Cu-clad Mo using a number of active braze alloys. The brazed joints revealed good interfacial bonding, preferential precipitation of active elements (e.g., Ti) at the composite/braze interface. Extensive braze penetration of the inter-fiber channels in the CVI C/C composites was observed. The chemical and thermomechanical compatibility between C/C and metals at elevated temperatures is assessed. The role of residual stresses and thermal conduction in brazed C/C joints is discussed. Theoretical predictions of the effective thermal resistance suggest that composite-to-metal brazed joints may be promising for lightweight thermal management applications.

  18. Recent Progress in Self-Supported Metal Oxide Nanoarray Electrodes for Advanced Lithium-Ion Batteries.

    PubMed

    Zhang, Feng; Qi, Limin

    2016-09-01

    The rational design and fabrication of electrode materials with desirable architectures and optimized properties has been demonstrated to be an effective approach towards high-performance lithium-ion batteries (LIBs). Although nanostructured metal oxide electrodes with high specific capacity have been regarded as the most promising alternatives for replacing commercial electrodes in LIBs, their further developments are still faced with several challenges such as poor cycling stability and unsatisfying rate performance. As a new class of binder-free electrodes for LIBs, self-supported metal oxide nanoarray electrodes have many advantageous features in terms of high specific surface area, fast electron transport, improved charge transfer efficiency, and free space for alleviating volume expansion and preventing severe aggregation, holding great potential to solve the mentioned problems. This review highlights the recent progress in the utilization of self-supported metal oxide nanoarrays grown on 2D planar and 3D porous substrates, such as 1D and 2D nanostructure arrays, hierarchical nanostructure arrays, and heterostructured nanoarrays, as anodes and cathodes for advanced LIBs. Furthermore, the potential applications of these binder-free nanoarray electrodes for practical LIBs in full-cell configuration are outlined. Finally, the future prospects of these self-supported nanoarray electrodes are discussed.

  19. Parametric Weight Comparison of Advanced Metallic, Ceramic Tile, and Ceramic Blanket Thermal Protection Systems

    NASA Technical Reports Server (NTRS)

    Myers, David E.; Martin, Carl J.; Blosser, Max L.

    2000-01-01

    A parametric weight assessment of advanced metallic panel, ceramic blanket, and ceramic tile thermal protection systems (TPS) was conducted using an implicit, one-dimensional (I-D) finite element sizing code. This sizing code contained models to account for coatings fasteners, adhesives, and strain isolation pads. Atmospheric entry heating profiles for two vehicles, the Access to Space (ATS) vehicle and a proposed Reusable Launch Vehicle (RLV), were used to ensure that the trends were not unique to a certain trajectory. Ten TPS concepts were compared for a range of applied heat loads and substructural heat capacities to identify general trends. This study found the blanket TPS concepts have the lightest weights over the majority of their applicable ranges, and current technology ceramic tiles and metallic TPS concepts have similar weights. A proposed, state-of-the-art metallic system which uses a higher temperature alloy and efficient multilayer insulation was predicted to be significantly lighter than the ceramic tile stems and approaches blanket TPS weights for higher integrated heat loads.

  20. Advances in Fatigue and Fracture Mechanics Analyses for Metallic Aircraft Structures

    NASA Technical Reports Server (NTRS)

    Newman, J. C., Jr.

    2000-01-01

    This paper reviews some of the advances that have been made in stress analyses of cracked aircraft components, in the understanding of the fatigue and fatigue-crack growth process, and in the prediction of residual strength of complex aircraft structures with widespread fatigue damage. Finite-element analyses of cracked metallic structures are now used to determine accurate stress-intensity factors for cracks at structural details. Observations of small-crack behavior at open and rivet-loaded holes and the development of small-crack theory has lead to the prediction of stress-life behavior for components with stress concentrations under aircraft spectrum loading. Fatigue-crack growth under simulated aircraft spectra can now be predicted with the crack-closure concept. Residual strength of cracked panels with severe out-of-plane deformations (buckling) in the presence of stiffeners and multiple-site damage can be predicted with advanced elastic-plastic finite-element analyses and the critical crack-tip-opening angle (CTOA) fracture criterion. These advances are helping to assure continued safety of aircraft structures.

  1. Advanced transition metal phosphide materials from single-source molecular precursors

    NASA Astrophysics Data System (ADS)

    Colson, Adam Caleb

    In this thesis, the feasibility of employing organometallic single-source precursors in the preparation of advanced transition metal pnictide materials such as colloidal nanoparticles and films has been investigated. In particular, the ternary FeMnP phase was targeted as a model for preparing advanced heterobimetallic phosphide materials, and the iron-rich Fe3P phase was targeted due to its favorable ferromagnetic properties as well as the fact that the preparation of advanced Fe3P materials has been elusive by commonly used methods. Progress towards the synthesis of advanced Fe2--xMn xP nanomaterials and films was facilitated by the synthesis of the novel heterobimetallic complexes FeMn(CO)8(mu-PR1R 2) (R1 = H, R2 = H or R1 = H, R2 = Ph), which contain the relatively rare mu-PH2 and mu-PPhH functionalities. Iron rich Fe2--xMnxP nanoparticles were obtained by thermal decomposition of FeMn(CO)8(mu-PH 2) using solution-based synthetic methods, and empirical evidence suggested that oleic acid was responsible for manganese depletion. Films containing Fe, Mn, and P with the desired stoichiometric ratio of 1:1:1 were prepared using FeMn(CO)8(mu-PH2) in a simple low-pressure metal-organic chemical vapor deposition (MOCVD) apparatus. Although the elemental composition of the precursor was conserved in the deposited film material, spectroscopic evidence indicated that the films were not composed of pure-phase FeMnP, but were actually mixtures of crystalline FeMnP and amorphous FeP and Mn xOy. A new method for the preparation of phase-pure ferromagnetic Fe 3P films on quartz substrates has also been developed. This approach involved the thermal decomposition of the single-source precursors H 2Fe3(CO)9PR (R = tBu or Ph) at 400 °C. The films were deposited using a simple home-built MOCVD apparatus and were characterized using a variety of analytical methods. The films exhibited excellent phase purity, as evidenced by X-ray diffraction, X-ray photoelectron spectroscopy, and

  2. The s-process in low-metallicity stars - II. Interpretation of high-resolution spectroscopic observations with asymptotic giant branch models

    NASA Astrophysics Data System (ADS)

    Bisterzo, S.; Gallino, R.; Straniero, O.; Cristallo, S.; Käppeler, F.

    2011-11-01

    High-resolution spectroscopic observations of 100 metal-poor carbon and s-rich stars (CEMP-s) collected from the literature are compared with the theoretical nucleosynthesis models of the asymptotic giant branch (AGB) presented in Paper I (MAGBini= 1.3, 1.4, 1.5, 2 M⊙, - 3.6 ≲ [ Fe/H ] ≲- 1.5). The s-process enhancement detected in these objects is associated with binary systems: the more massive companion evolved faster through the thermally pulsing AGB phase (TP-AGB), synthesizing s-elements in the inner He intershell, which are partly dredged up to the surface during the third dredge-up (TDU) episode. The secondary observed low-mass companion became CEMP-s by the mass transfer of C- and s-rich material from the primary AGB. We analyse the light elements C, N, O, Na and Mg, as well as the two s-process indicators, [hs/ls] (where ls = is the the light-s peak at N = 50 and hs = the heavy-s peak at N = 82) and [Pb/hs]. We distinguish between CEMP-s with high s-process enhancement, [hs/Fe] >rsim 1.5 (CEMP-sII), and mild s-process enhanced stars, [hs/Fe] < 1.5 (CEMP-sI). To interpret the observations, a range of s-process efficiencies at any given metallicity is necessary. This is confirmed by the high spread observed in [Pb/hs] (˜2 dex). A degeneration of solutions is found with some exceptions: most main-sequence CEMP-sII stars with low [Na/Fe] can only be interpreted with MAGBini= 1.3-1.4 M⊙. Giants having suffered the first dredge-up (FDU) need a dilution >rsim1 dex (dil is defined as the mass of the convective envelope of the observed star, Mobs★, over the material transferred from the AGB to the companion, MtransAGB). Then AGB models with higher AGB initial masses (MAGBini= 1.5-2 M⊙) are adopted to interpret CEMP-sII giants. In general, solutions with AGB models in the mass range MAGBini= 1.3-2 M⊙ and different dilution factors are found for CEMP-sI stars. About half of the CEMP-s stars with europium measurements show a high r

  3. Development of a metal-clad advanced composite shear web design concept

    NASA Technical Reports Server (NTRS)

    Laakso, J. H.

    1974-01-01

    An advanced composite web concept was developed for potential application to the Space Shuttle Orbiter main engine thrust structure. The program consisted of design synthesis, analysis, detail design, element testing, and large scale component testing. A concept was sought that offered significant weight saving by the use of Boron/Epoxy (B/E) reinforced titanium plate structure. The desired concept was one that was practical and that utilized metal to efficiently improve structural reliability. The resulting development of a unique titanium-clad B/E shear web design concept is described. Three large scale components were fabricated and tested to demonstrate the performance of the concept: a titanium-clad plus or minus 45 deg B/E web laminate stiffened with vertical B/E reinforced aluminum stiffeners.

  4. Advanced composite structures. [metal matrix composites - structural design criteria for spacecraft construction materials

    NASA Technical Reports Server (NTRS)

    1974-01-01

    A monograph is presented which establishes structural design criteria and recommends practices to ensure the design of sound composite structures, including composite-reinforced metal structures. (It does not discuss design criteria for fiber-glass composites and such advanced composite materials as beryllium wire or sapphire whiskers in a matrix material.) Although the criteria were developed for aircraft applications, they are general enough to be applicable to space vehicles and missiles as well. The monograph covers four broad areas: (1) materials, (2) design, (3) fracture control, and (4) design verification. The materials portion deals with such subjects as material system design, material design levels, and material characterization. The design portion includes panel, shell, and joint design, applied loads, internal loads, design factors, reliability, and maintainability. Fracture control includes such items as stress concentrations, service-life philosophy, and the management plan for control of fracture-related aspects of structural design using composite materials. Design verification discusses ways to prove flightworthiness.

  5. Hydroquinone-assisted synthesis of branched au-ag nanoparticles with polydopamine coating as highly efficient photothermal agents.

    PubMed

    Li, Jing; Wang, Wenjing; Zhao, Liang; Rong, Li; Lan, Shijie; Sun, Hongchen; Zhang, Hao; Yang, Bai

    2015-06-03

    Despite the success of galvanic replacement in preparing hollow nanostructures with diversified morphologies via the replacement reaction between sacrificial metal nanoparticles (NPs) seeds and less active metal ions, limited advances are made for producing branched alloy nanostructures. In this paper, we report an extended galvanic replacement for preparing branched Au-Ag NPs with Au-rich core and Ag branches using hydroquinone (HQ) as the reductant. In the presence of HQ, the preformed Ag seeds are replaceable by Au and, in turn, supply the growth of Ag branches. By altering the feed ratio of Ag seeds, HAuCl4, and HQ, the size and morphology of the NPs are tunable. Accordingly, the surface plasmon resonance absorption is tuned to near-infrared (NIR) region, making the branched NPs as potential materials in photothermal therapy. The branched NPs are further coated with polydopamine (PDA) shell via dopamine polymerization at room temperature. In comparison with bare NPs, PDA-coated branched Au-Ag (Au-Ag@PDA) NPs exhibit improved stability, biocompatibility, and photothermal performance. In vitro experiments indicate that the branched Au-Ag@PDA NPs are competitive agents for photothermal ablation of cancer cells.

  6. Robotics application for in-service inspection of the ALMR. [Advanced Liquid Metal Reactor (ALMR)

    SciTech Connect

    Kwant, W.; Ramsour, N.L. . Nuclear Energy Div.); Sweeney, F.J. )

    1993-01-01

    The US Advanced Liquid Metal Reactor (ALMR) Program is developing and licensing a reactor system that is compact for factory fabrication and modular construction. The design includes provisions for in-service inspection to verify performance and safety capabilities throughout the life of the plant. A DOE sponsored robotics team, comprised of members from the universities of Florida, Michigan, Tennessee, Texas and from Oak Ridge National Laboratory, is developing advanced inspection equipment using robotics for nuclear application. This equipment is compact and remotely operated and particularly suited for inspection of the ALMR. Extensive 3D simulations are used to refine and demonstrate the inspection methods. This paper focuses on inspection methods for the reactor vessel and the reactor vessel auxiliary cooling system (RVACS). Inspection capabilities are included for visual inspection of the reactor vessel outer surface and volumetric inspection of the welds. The robotics team is devising a compact crawler design with the capabilities to perform these inspections. Similarly, various robot concepts are being evaluated for accomplishing the RVACS visual inspection and cleaning procedures.

  7. Mechanical Components Branch Test Facilities and Capabilities

    NASA Technical Reports Server (NTRS)

    Oswald, Fred B.

    2004-01-01

    The Mechanical Components Branch at NASA Glenn Research Center formulates, conducts, and manages research focused on propulsion systems for both present and advanced aeronautical and space vehicles. The branch is comprised of research teams that perform basic research in three areas: mechanical drives, aerospace seals, and space mechanisms. Each team has unique facilities for testing aerospace hardware and concepts. This report presents an overview of the Mechanical Components Branch test facilities.

  8. ADVANCES IN BIOTREATMENT OF ACID MINE DRAINAGE AND BIORECOVERY OF METALS: 1. METAL PRECIPITATION FOR RECOVERY AND RECYCLE

    EPA Science Inventory

    Acid-mine drainage (AMD) is a severe pollution problem attributed to past mining activities. AMD is an acidic, metal-bearing wastewater generated by the oxidation of metal sulfides to sulfates by Thiobacillus bacteria in both active and abandoned mining operations. The wastewater...

  9. Amorphous mixed-metal hydroxide nanostructures for advanced water oxidation catalysts

    NASA Astrophysics Data System (ADS)

    Gao, Y. Q.; Liu, X. Y.; Yang, G. W.

    2016-02-01

    The design of highly efficient, durable, and earth-abundant catalysts for the oxygen evolution reaction (OER) is crucial in order to promote energy conversion and storage processes. Here, we synthesize amorphous mixed-metal (Ni-Fe) hydroxide nanostructures with a homogeneous distribution of Ni/Fe as well as a tunable Ni/Fe ratio by a simple, facile, green and low-cost electrochemical technique, and we demonstrate that the synthesized amorphous nanomaterials possess ultrahigh activity and super long-term cycle stability in the OER process. The amorphous Ni0.71Fe0.29(OH)x nanostructure affords a current density of 10 mA cm-2 at an overpotential of a mere 0.296 V and a small Tafel slope of 58 mV dec-1, while no deactivation is detected in the CV testing even up to 30 000 cycles, which suggests the promising application of these amorphous nanomaterials in electrochemical oxidation. Meanwhile, the distinct catalytic activities among these amorphous Ni-Fe hydroxide nanostructures prompts us to take notice of the composition of the alloy hydroxides/oxides when studying their catalytic properties, which opens an avenue for the rational design and controllable preparation of such amorphous nanomaterials as advanced OER electrocatalysts.The design of highly efficient, durable, and earth-abundant catalysts for the oxygen evolution reaction (OER) is crucial in order to promote energy conversion and storage processes. Here, we synthesize amorphous mixed-metal (Ni-Fe) hydroxide nanostructures with a homogeneous distribution of Ni/Fe as well as a tunable Ni/Fe ratio by a simple, facile, green and low-cost electrochemical technique, and we demonstrate that the synthesized amorphous nanomaterials possess ultrahigh activity and super long-term cycle stability in the OER process. The amorphous Ni0.71Fe0.29(OH)x nanostructure affords a current density of 10 mA cm-2 at an overpotential of a mere 0.296 V and a small Tafel slope of 58 mV dec-1, while no deactivation is detected in the CV

  10. Thermal Energy Conversion Branch

    NASA Technical Reports Server (NTRS)

    Bielozer, Matthew C.; Schreiber, Jeffrey, G.; Wilson, Scott D.

    2004-01-01

    The Thermal Energy Conversion Branch (5490) leads the way in designing, conducting, and implementing research for the newest thermal systems used in space applications at the NASA Glenn Research Center. Specifically some of the most advanced technologies developed in this branch can be broken down into four main areas: Dynamic Power Systems, Primary Solar Concentrators, Secondary Solar Concentrators, and Thermal Management. Work was performed in the Dynamic Power Systems area, specifically the Stirling Engine subdivision. Today, the main focus of the 5490 branch is free-piston Stirling cycle converters, Brayton cycle nuclear reactors, and heat rejection systems for long duration mission spacecraft. All space exploring devices need electricity to operate. In most space applications, heat energy from radioisotopes is converted to electrical power. The Radioisotope Thermoelectric Generator (RTG) already supplies electricity for missions such as the Cassini Spacecraft. The focus of today's Stirling research at GRC is aimed at creating an engine that can replace the RTG. The primary appeal of the Stirling engine is its high system efficiency. Because it is so efficient, the Stirling engine will significantly reduce the plutonium fuel mission requirements compared to the RTG. Stirling is also being considered for missions such as the lunar/Mars bases and rovers. This project has focused largely on Stirling Engines of all types, particularly the fluidyne liquid piston engine. The fluidyne was developed by Colin D. West. This engine uses the same concepts found in any type of Stirling engine, with the exception of missing mechanical components. All the working components are fluid. One goal was to develop and demonstrate a working Stirling Fluidyne Engine at the 2nd Annual International Energy Conversion Engineering Conference in Providence, Rhode Island.

  11. An advanced field experimental design to assess plant tolerance to heavy metal pollution

    NASA Astrophysics Data System (ADS)

    Łopata, Barbara; Szarek-Łukaszewska, Grażyna; Babst-Kostecka, Alicja

    2016-04-01

    Only a limited number of vascular plant species can survive and reproduce in toxic metalliferous environments. Among these species, pseudometallophytes are particularly interesting, as their metallicolous (M) populations on metalliferous soils and non-metallicolous (NM) populations on non-metalliferous soils show very pronounced ecological differences. Pseudometallophytes thus provide excellent opportunities for multidisciplinary research to improve phytoremediation and phytomining. Numerous methods have been developed to investigate plant adaptation to metal pollution, the majority of which has been conducted under controlled laboratory conditions. Although these efforts have significantly advanced our understanding of mechanisms underlying metal tolerance in plants, populations must be reciprocally transplanted to clearly identify natural selection. Only then is it possible to test, whether the fitness of native plants is higher than that of nonnative populations and thereby prove local adaptation. Here, we present an enhanced field experimental design aimed at verification of local adaptation to habitats with different levels of heavy metal soil contamination. At two M and two NM sites, we established a total of 12 plots (4 sites x 3 plots each), removed the existing local vegetation, and collected soil samples for chemical analyses (5 samples per plot). Plant collection (N= 480) from all four selected populations was established under laboratory conditions prior to the transplant experiment. Genotypes were randomly distributed within each plot (240 x 270 cm) and planted along a regulary spaced grid (30x30cm cell size) in spring 2015. Measurements will start in spring 2016, by which time plants are expected to have acclimatized to the local conditions. For the two subsiquent years, growth, survival, fitness, life cycle and herbivory consumption will be monitored for each transplant. On a weekly basis, we will record: 1) pictures of each transplant to determine

  12. Transition-metal-catalyzed Suzuki-Miyaura cross-coupling reactions: a remarkable advance from palladium to nickel catalysts.

    PubMed

    Han, Fu-She

    2013-06-21

    In the transition-metal-catalyzed cross-coupling reactions, the use of the first row transition metals as catalysts is much more appealing than the precious metals owing to the apparent advantages such as cheapness and earth abundance. Within the last two decades, particularly the last five years, explosive interests have been focused on the nickel-catalyzed Suzuki-Miyaura reactions. This has greatly advanced the chemistry of transition-metal-catalyzed cross-coupling reactions. Most notably, a broad range of aryl electrophiles such as phenols, aryl ethers, esters, carbonates, carbamates, sulfamates, phosphates, phosphoramides, phosphonium salts, and fluorides, as well as various alkyl electrophiles, which are conventionally challenging, by applying palladium catalysts can now be coupled efficiently with boron reagents in the presence of nickel catalysts. In this review, we would like to summarize the progress in this reaction.

  13. Comparative molecular developmental aspects of the mammalian- and the avian lungs, and the insectan tracheal system by branching morphogenesis: recent advances and future directions

    PubMed Central

    2012-01-01

    Gas exchangers fundamentally form by branching morphogenesis (BM), a mechanistically profoundly complex process which derives from coherent expression and regulation of multiple genes that direct cell-to-cell interactions, differentiation, and movements by signaling of various molecular morphogenetic cues at specific times and particular places in the developing organ. Coordinated expression of growth-instructing factors determines sizes and sites where bifurcation occurs, by how much a part elongates before it divides, and the angle at which branching occurs. BM is essentially induced by dualities of factors where through feedback- or feed forward loops agonists/antagonists are activated or repressed. The intricate transactions between the development orchestrating molecular factors determine the ultimate phenotype. From the primeval time when the transformation of unicellular organisms to multicellular ones occurred by systematic accretion of cells, BM has been perpetually conserved. Canonical signalling, transcriptional pathways, and other instructive molecular factors are commonly employed within and across species, tissues, and stages of development. While much still remain to be elucidated and some of what has been reported corroborated and reconciled with rest of existing data, notable progress has in recent times been made in understanding the mechanism of BM. By identifying and characterizing the morphogenetic drivers, and markers and their regulatory dynamics, the elemental underpinnings of BM have been more precisely explained. Broadening these insights will allow more effective diagnostic and therapeutic interventions of developmental abnormalities and pathologies in pre- and postnatal lungs. Conservation of the molecular factors which are involved in the development of the lung (and other branched organs) is a classic example of nature’s astuteness in economically utilizing finite resources. Once purposefully formed, well-tested and tried ways and

  14. Deterministic side-branching during thermal dendritic growth

    NASA Astrophysics Data System (ADS)

    Mullis, Andrew M.

    2015-06-01

    The accepted view on dendritic side-branching is that side-branches grow as the result of selective amplification of thermal noise and that in the absence of such noise dendrites would grow without the development of side-arms. However, recently there has been renewed speculation about dendrites displaying deterministic side-branching [see e.g. ME Glicksman, Metall. Mater. Trans A 43 (2012) 391]. Generally, numerical models of dendritic growth, such as phase-field simulation, have tended to display behaviour which is commensurate with the former view, in that simulated dendrites do not develop side-branches unless noise is introduced into the simulation. However, here we present simulations at high undercooling that show that under certain conditions deterministic side-branching may occur. We use a model formulated in the thin interface limit and a range of advanced numerical techniques to minimise the numerical noise introduced into the solution, including a multigrid solver. Not only are multigrid solvers one of the most efficient means of inverting the large, but sparse, system of equations that results from implicit time-stepping, they are also very effective at smoothing noise at all wavelengths. This is in contrast to most Jacobi or Gauss-Seidel iterative schemes which are effective at removing noise with wavelengths comparable to the mesh size but tend to leave noise at longer wavelengths largely undamped. From an analysis of the tangential thermal gradients on the solid-liquid interface the mechanism for side-branching appears to be consistent with the deterministic model proposed by Glicksman.

  15. Amorphous mixed-metal hydroxide nanostructures for advanced water oxidation catalysts.

    PubMed

    Gao, Y Q; Liu, X Y; Yang, G W

    2016-03-07

    The design of highly efficient, durable, and earth-abundant catalysts for the oxygen evolution reaction (OER) is crucial in order to promote energy conversion and storage processes. Here, we synthesize amorphous mixed-metal (Ni-Fe) hydroxide nanostructures with a homogeneous distribution of Ni/Fe as well as a tunable Ni/Fe ratio by a simple, facile, green and low-cost electrochemical technique, and we demonstrate that the synthesized amorphous nanomaterials possess ultrahigh activity and super long-term cycle stability in the OER process. The amorphous Ni0.71Fe0.29(OH)x nanostructure affords a current density of 10 mA cm(-2) at an overpotential of a mere 0.296 V and a small Tafel slope of 58 mV dec(-1), while no deactivation is detected in the CV testing even up to 30 000 cycles, which suggests the promising application of these amorphous nanomaterials in electrochemical oxidation. Meanwhile, the distinct catalytic activities among these amorphous Ni-Fe hydroxide nanostructures prompts us to take notice of the composition of the alloy hydroxides/oxides when studying their catalytic properties, which opens an avenue for the rational design and controllable preparation of such amorphous nanomaterials as advanced OER electrocatalysts.

  16. Analysis of hot forming of a sheet metal component made of advanced high strength steel

    NASA Astrophysics Data System (ADS)

    Demirkaya, Sinem; Darendeliler, Haluk; Gökler, Mustafa İlhan; Ayhaner, Murat

    2013-05-01

    To provide reduction in weight while maintaining crashworthiness and to decrease the fuel consumption of vehicles, thinner components made of Advanced High Strength Steels (AHSS) are being increasingly used in automotive industry. However, AHSS cannot be formed easily at the room temperature (i.e. cold forming). The alternative process involves heating, hot forming and subsequent quenching. A-pillar upper reinforcement of a vehicle is currently being produced by cold forming of DP600 steel sheet with a thickness of 1.8 mm. In this study, the possible decrease in the thickness of this particular part by using 22MnB5 as appropriate AHSS material and applying this alternative process has been studied. The proposed process involves deep drawing, trimming, heating, sizing, cooling and piercing operations. Both the current production process and the proposed process are analyzed by the finite element method. The die geometry, blank holding forces and the design of the cooling channels for the cooling process are determined numerically. It is shown that the particular part made of 22MnB5 steel sheet with a thickness of 1.2 mm can be successfully produced by applying the proposed process sequence and can be used without sacrificing the crashworthiness. With the use of the 22MnB5 steel with a thickness of 1.2 mm instead of DP600 sheet metal with a thickness of 1.8 mm, the weight is reduced by approximately 33%.

  17. The effect of advanced treatment on chlorine decay in metallic pipes.

    PubMed

    Rossman, Lewis A

    2006-07-01

    Experiments were run to measure what effect advanced treatment might have on the kinetics of chlorine and chloramine decay in metallic pipes that comprise many drinking water distribution systems. A recirculating loop of 6-in diameter unlined ductile iron pipe was used to simulate turbulent flow conditions in a pipe with significant corrosion and tubercle buildup. Conventionally treated test water was subjected to either ozonation, carbon adsorption (GAC), reverse osmosis (RO) or no further treatment before being chlorinated and introduced into the pipeline simulator. Results showed that overall chlorine decay in the simulator was consistently dominated by wall reactions whose first-order rate constants were an order of magnitude higher than those for the bulk water. With free chlorine, the wall rate constants for ozonated and GAC-treated water were about twice those of conventional or RO-treated water. This behavior is believed due to the effect that changes in the organic content of water have on its ability to complex iron and the effect that changes in water conductivity have on pipe wall corrosion. Tests run with chloraminated water showed no statistically significant effect of treatment type and had wall rate constants that were only 40 to 70% as high as those using free chlorine.

  18. Hydrometallurgical recovery of heavy metals from low grade automobile shredder residue (ASR): An application of advanced Fenton process (AFP).

    PubMed

    Singh, Jiwan; Lee, Byeong-Kyu

    2015-09-15

    To investigate the leaching and recovery of heavy metals from low-grade automobile shredder residue (ASR), the effects of nitric acid (HNO3) and hydrogen peroxide (H2O2) concentrations, liquid/solid (L/S) ratio, leaching temperature and ASR particle size fractions on the heavy metal leaching rate were determined. The heavy metals were recovered by fractional precipitation and advanced Fenton process (AFP) at different pHs. The toxicity characteristic leaching procedure (TCLP) test was also performed in the residue remaining after heavy metal leaching to evaluate the potential toxicity of ASR. The heavy metal leaching efficiency was increased with increasing HNO3 and H2O2 concentrations, L/S ratio and temperature. The heavy metal leaching efficiencies were maximized in the lowest ASR size fraction at 303 K and L/S ratio of 100 mL/g. The kinetic study showed that the metal leaching was best represented by a second-order reaction model, with a value of R(2) > 0.99 for all selected heavy metals. The determined activation energy (kJ/mol) was 21.61, 17.10, 12.15, 34.50, 13.07 and 11.45 for Zn, Fe, Ni, Pb, Cd and Cr, respectively. In the final residue, the concentrations of Cd, Cr and Pb were under their threshold limits in all ASR size fractions. Hydrometallurgical metal recovery was greatly increased by AFP up to 99.96% for Zn, 99.97% for Fe, 95.62% for Ni, 99.62% for Pb, 94.11% for Cd and 96.79% for Cr. AFP is highly recommended for the recovery of leached metals from solution even at low concentrations.

  19. Advances in biotreatment of acid mine drainage and biorecovery of metals: 1. Metal precipitation for recovery and recycle.

    PubMed

    Tabak, Henry H; Scharp, Richard; Burckle, John; Kawahara, Fred K; Govind, Rakesh

    2003-12-01

    Acid mine drainage (AMD), an acidic metal-bearing wastewater, poses a severe pollution problem attributed to post mining activities. The metals usually encountered in AMD and considered of concern for risk assessment are arsenic, cadmium, iron, lead, manganese, zinc, copper and sulfate. The pollution generated by abandoned mining activities in the area of Butte, Montana has resulted in the designation of the Silver Bow Creek-Butte Area as the largest Superfund (National Priorities List) site in the U.S. This paper reports the results of bench-scale studies conducted to develop a resource recovery based remediation process for the clean up of the Berkeley Pit. The process utilizes selective, sequential precipitation (SSP) of metals as hydroxides and sulfides, such as copper, zinc, aluminum, iron and manganese, from the Berkeley Pit AMD for their removal from the water in a form suitable for additional processing into marketable precipitates and pigments. The metal biorecovery and recycle process is based on complete separation of the biological sulfate reduction step and the metal precipitation step. Hydrogen sulfide produced in the SRB bioreactor systems is used in the precipitation step to form insoluble metal sulfides. The average metal recoveries using the SSP process were as follows: aluminum (as hydroxide) 99.8%, cadmium (as sulfide) 99.7%, cobalt (as sulfide) 99.1% copper (as sulfide) 99.8%, ferrous iron (sulfide) 97.1%, manganese (as sulfide) 87.4%, nickel (as sulfide) 47.8%, and zinc (as sulfide) 100%. The average precipitate purity for metals, copper sulfide, ferric hydroxide, zinc sulfide, aluminum hydroxide and manganese sulfide were: 92.4, 81.5, 97.8, 95.6, 92.1 and 75.0%, respectively. The final produced water contained only calcium and magnesium and both sulfate and sulfide concentrations were below usable water limits. Water quality of this agriculturally usable water met the EPA's gold standard criterion.

  20. Advanced Planning Briefing for Industry Proceedings, ’Winning the Information War’ held in Long Branch, New Jersey on May 11 - 12, 1994

    DTIC Science & Technology

    1994-05-12

    AD-A280 050 6 UNITED STATES ARMY COMMUNICATIONS-ELECTRONICS COMMAND FORT MONMOUTH, NEW JERSEY coI3jt TiTi f Irr 94-173?v? ADVANCE PLANNING BRIEFING...spectrum to eavesdrop and take its use away from the enemy through jamming and precision strikes. SESSION OVERVIEW AND INTRODUCTION MODERATOR Mr. Robert F ...ANSWER PERIOD 1150 LUNCH vii 1315 SESSION VI: SUSTAINING THE BATTLEFIELD SESSION OVERVIEW AND INTRODUCTION MODERATOR Mr. Colin F . MacDonnell, Jr

  1. Geodynamics Branch research report, 1982

    NASA Technical Reports Server (NTRS)

    Kahn, W. D. (Editor); Cohen, S. C. (Editor)

    1983-01-01

    The research program of the Geodynamics Branch is summarized. The research activities cover a broad spectrum of geoscience disciplines including space geodesy, geopotential field modeling, tectonophysics, and dynamic oceanography. The NASA programs which are supported by the work described include the Geodynamics and Ocean Programs, the Crustal Dynamics Project, the proposed Ocean Topography Experiment (TOPEX) and Geopotential Research Mission. The individual papers are grouped into chapters on Crustal Movements, Global Earth Dynamics, Gravity Field Model Development, Sea Surface Topography, and Advanced Studies.

  2. Pseudocapacitive Na-Ion Storage Boosts High Rate and Areal Capacity of Self-Branched 2D Layered Metal Chalcogenide Nanoarrays.

    PubMed

    Chao, Dongliang; Liang, Pei; Chen, Zhen; Bai, Linyi; Shen, He; Liu, Xiaoxu; Xia, Xinhui; Zhao, Yanli; Savilov, Serguei V; Lin, Jianyi; Shen, Ze Xiang

    2016-11-22

    The abundant reserve and low cost of sodium have provoked tremendous evolution of Na-ion batteries (SIBs) in the past few years, but their performances are still limited by either the specific capacity or rate capability. Attempts to pursue high rate ability with maintained high capacity in a single electrode remains even more challenging. Here, an elaborate self-branched 2D SnS2 (B-SnS2) nanoarray electrode is designed by a facile hot bath method for Na storage. This interesting electrode exhibits areal reversible capacity of ca. 3.7 mAh cm(-2) (900 mAh g(-1)) and rate capability of 1.6 mAh cm(-2) (400 mAh g(-1)) at 40 mA cm(-2) (10 A g(-1)). Improved extrinsic pseudocapacitive contribution is demonstrated as the origin of fast kinetics of an alloying-based SnS2 electrode. Sodiation dynamics analysis based on first-principles calculations, ex-situ HRTEM, in situ impedance, and in situ Raman technologies verify the S-edge effect on the fast Na(+) migration and reversible and sensitive structure evolution during high-rate charge/discharge. The excellent alloying-based pseudocapacitance and unsaturated edge effect enabled by self-branched surface nanoengineering could be a promising strategy for promoting development of SIBs with both high capacity and high rate response.

  3. Application of holographic interferometry for analysis of the dynamic and modal characteristics of an advanced exotic metal airfoil structure

    NASA Astrophysics Data System (ADS)

    Fein, Howard

    1999-03-01

    Holographic Interferometry has been successfully employed to characterize the materials and behavior of diverse types of structures under stress. Specialized variations of this technology have also been applied to define dynamic and vibration related structural behavior. Such applications of holographic technique offer some of the most effective methods of modal and dynamic analysis available. Real-time dynamic testing of the modal and mechanical behavior of aerodynamic control and airfoil structures for advanced aircraft has always required advanced instrumentation for data collection in either actual flight test or wind-tunnel simulations. Advanced optical holography techniques are alternate methods which result in actual full-field behavioral data on the ground in a noninvasive environment. These methods offer significant insight in both the development and subsequent operational test and modeling of advanced exotic metal control structures and their integration with total vehicle system dynamics. Structures and materials can be analyzed with very low amplitude excitation and the resultant data can be used to adjust the accuracy mathematically derived structural and behavioral models. Holographic Interferometry offers a powerful tool to aid in the developmental engineering of exotic metal structures for high stress applications. Advanced Titanium alloy is a significant example of these sorts of materials which has found continually increased use in advanced aerodynamic, undersea, and other highly mobil platforms. Aircraft applications in particular must consider environments where extremes in vibration and impulsive mechanical stress can affect both operation and structural stability. These considerations present ideal requisites for analysis using advanced holographic methods in the initial design and test of structures made with such advanced materials. Holographic techniques are nondestructive, real- time, and definitive in allowing the identification of

  4. Controlled synthesis of hyper-branched inorganic nanocrystals withrich three-dimensional structures

    SciTech Connect

    Kanaras, Antonios G.; Sonnichsen, Carsten; Liu, Haitao; Alivisatos, A. Paul

    2005-07-27

    Studies of crystal growth kinetics are tightly integrated with advances in the creation of new nanoscale inorganic building blocks and their functional assemblies 1-11. Recent examples include the development of semiconductor nanorods which have potential uses in solar cells 12-17, and the discovery of a light driven process to create noble metal particles with sharp corners that can be used in plasmonics 18,19. In the course of studying basic crystal growth kinetics we developed a process for preparing branched semiconductor nanocrystals such as tetrapods and inorganic dendrimers of precisely controlled generation 20,21. Here we report the discovery of a crystal growth kinetics regime in which a new class of hyper-branched nanocrystals are formed. The shapes range from 'thorny balls', to tree-like ramified structures, to delicate 'spider net'-like particles. These intricate shapes depend crucially on a delicate balance of branching and extension. The multitudes of resulting shapes recall the diverse shapes of snowflakes 22.The three dimensional nature of the branch points here, however, lead to even more complex arrangements than the two dimensionally branched structures observed in ice. These hyper-branched particles not only extend the available three-dimensional shapes in nanoparticle synthesis ,but also provide a tool to study growth kinetics by carefully observing and modeling particle morphology.

  5. FY 1990 Applied Sciences Branch annual report

    SciTech Connect

    Keyes, B.M.; Dippo, P.C.

    1991-11-01

    The Applied Sciences Branch actively supports the advancement of DOE/SERI goals for the development and implementation of the solar photovoltaic technology. The primary focus of the laboratories is to provide state-of-the-art analytical capabilities for materials and device characterization and fabrication. The branch houses a comprehensive facility which is capable of providing information on the full range of photovoltaic components. A major objective of the branch is to aggressively pursue collaborative research with other government laboratories, universities, and industrial firms for the advancement of photovoltaic technologies. Members of the branch disseminate research findings to the technical community in publications and presentations. This report contains information on surface and interface analysis, materials characterization, development, electro-optical characterization module testing and performance, surface interactions and FTIR spectroscopy.

  6. SINGLE-PARTICLE ICPMS FOR CHARACTERIZING METAL-BASED NANOPARTICLES IN THE ENVIRONMENT - ADVANCES AND CHALLENGES

    EPA Science Inventory

    As engineered metal-based nanomaterials become widely used in consumer and industrial products, the amount of these materials introduced into the environment by a variety of paths will increase. The concentration of metal associated with these engineered nanoparticles will be s...

  7. Recent advances in chiral imino-containing ligands for metal-catalyzed asymmetric transformations.

    PubMed

    Chen, Xu; Lu, Zhan

    2017-03-21

    In this review, the recent applications of a variety of chiral imino-containing ligands classified by different types of metal-catalyzed asymmetric reactions are summarized. The progress made in this area would encourage us to design and synthesize more novel chiral imino-containing ligands, and explore their applications in metal-catalyzed asymmetric transformations.

  8. Recent advances in transition metal-catalyzed Csp2-monofluoro-, difluoro-, perfluoromethylation and trifluoromethylthiolation

    PubMed Central

    Landelle, Grégory; Panossian, Armen; Pazenok, Sergiy; Vors, Jean-Pierre

    2013-01-01

    Summary In the last few years, transition metal-mediated reactions have joined the toolbox of chemists working in the field of fluorination for Life-Science oriented research. The successful execution of transition metal-catalyzed carbon–fluorine bond formation has become a landmark achievement in fluorine chemistry. This rapidly growing research field has been the subject of some excellent reviews. Our approach focuses exclusively on transition metal-catalyzed reactions that allow the introduction of –CFH2, –CF2H, –CnF2 n +1 and –SCF3 groups onto sp² carbon atoms. Transformations are discussed according to the reaction-type and the metal employed. The review will not extend to conventional non-transition metal methods to these fluorinated groups. PMID:24367416

  9. Assessment of pollution and identification of sources of heavy metals in the sediments of Changshou Lake in a branch of the Three Gorges Reservoir.

    PubMed

    Liang, Ao; Wang, Yechun; Guo, Hongtao; Bo, Lei; Zhang, Sheng; Bai, Yili

    2015-10-01

    To assess the heavy metal pollution in Changshou Lake, sediments were collected from nine sites at three periods (dry, normal, and wet) in 2013. The Hg, As, Cr, Cd, Pb, Cu, and Zn levels were then determined. The index of geoaccumulation (I geo) and the sediment pollution index (SPI) were applied to the sediment assessment, and Pearson's correlation analysis and factor analysis (FA) were performed to identify common pollution sources in the basin. The results showed that heavy metals presented significant spatial variations with Cr, Cd, Pb, Cu, Zn, Hg, and As concentrations of 29.66~42.58, 0.62~0.91, 24.91~37.96, 21.18~74.91, 41.65~86.86, 0.079~0.152, and 20.17~36.88 mg kg(-1), respectively, and no obvious variations were found among the different periods. The average contents of the metals followed the order Zn > Cu > Cr > Pb > As > Cd > Hg, which showed a high pollution in the sediments collected from open water and at the river mouth. The assessment results indicated that toxic heavy metals presented obvious pollution with I Hg of 0.64~1.36 (moderately polluted), I Cd of 1.66~2.22 (moderately to heavily polluted), and I As of 1.21~2.07 (moderately to heavily polluted). The heavy metal pollution states followed the order Cd > As > Hg > Cu > Pb > Zn > Cr, and the SPI showed that the sediment collected from open water area was more polluted than those obtained from the tributaries and the river mouth. Cr, Cd, Hg, Pb, Cu, As, and Zn were mainly attributed to sediment weathering with Hg, Pb, and Cu and partially due to domestic sewage from the upper reaches. These results indicate that the more attention should be paid to the inner loads of sediment in order to achieve improvements in reservoir water quality after the control of external pollution.

  10. Tillering and panicle branching genes in rice.

    PubMed

    Liang, Wei-hong; Shang, Fei; Lin, Qun-ting; Lou, Chen; Zhang, Jing

    2014-03-01

    Rice (Oryza sativa L.) is one of the most important staple food crops in the world, and rice tillering and panicle branching are important traits determining grain yield. Since the gene MONOCULM 1 (MOC 1) was first characterized as a key regulator in controlling rice tillering and branching, great progress has been achieved in identifying important genes associated with grain yield, elucidating the genetic basis of yield-related traits. Some of these important genes were shown to be applicable for molecular breeding of high-yielding rice. This review focuses on recent advances, with emphasis on rice tillering and panicle branching genes, and their regulatory networks.

  11. Analytical and experimental evaluation of joining silicon nitride to metal and silicon carbide to metal for advanced heat engine applications. Final report

    SciTech Connect

    Kang, S.; Selverian, J.H.; O`Neil, D.; Kim, H.; Kim, K.

    1993-05-01

    This report summarizes the results of Phase 2 of Analytical and Experimental Evaluation of Joining Silicon Nitride to Metal and Silicon Carbide to Metal for Advanced Heat Engine Applications. A general methodology was developed to optimize the joint geometry and material systems for 650{degrees}C applications. Failure criteria were derived to predict the fracture of the braze and ceramic. Extensive finite element analyses (FEA) were performed to examine various joint geometries and to evaluate the affect of different interlayers on the residual stress state. Also, material systems composed of coating materials, interlayers, and braze alloys were developed for the program based on the chemical stability and strength of the joints during processing, and service. The FEA results were compared with experiments using two methods: (1) an idealized strength relationship of the ceramic, and (2) a probabilistic analysis of the ceramic strength (NASA CARES). The results showed that the measured strength of the joint reached 30--80% of the strength predicted by FEA. Also, potential high-temperature braze alloys were developed and evaluated for the high-temperature application of ceramic-metal joints. 38 tabs, 29 figs, 20 refs.

  12. Metal nanoparticles in liquid phase catalysis; from recent advances to future goals.

    PubMed

    Zahmakıran, Mehmet; Ozkar, Saim

    2011-09-01

    Metal nanoparticles have attracted much attention over the last decade owing to their unique properties, different to their bulk counterparts, which pave the way for their application in different fields from materials science and engineering to biomedical applications. Of particular interest, the use of metal nanoparticles in catalysis has brought superior efficiency in terms of activity, selectivity and lifetime to heterogeneous catalysis. This article reviews the recent developments in the synthesis routes and the catalytic performance of metal nanoparticles depending on the solvent used for various organic and inorganic transformations. Additionally, we also discuss the prevalent complications and their possible solutions plus future prospects in the field of nanocatalysis.

  13. Recent advances in transition metal-catalyzed N -atom transfer reactions of azides

    PubMed Central

    Driver, Tom G.

    2011-01-01

    Transition metal-catalyzed N-atom transfer reactions of azides provide efficient ways to construct new carbon–nitrogen and sulfur–nitrogen bonds. These reactions are inherently green: no additive besides catalyst is needed to form the nitrenoid reactive intermediate, and the by-product of the reaction is environmentally benign N2 gas. As such, azides can be useful precursors for transition metal-catalyzed N-atom transfer to sulfides, olefins and C–H bonds. These methods offer competitive selectivities and comparable substrate scope as alternative processes to generate metal nitrenoids. PMID:20617243

  14. Advances in high temperature components for AMTEC (Alkali Metal Thermal-to-Electric Converter)

    NASA Technical Reports Server (NTRS)

    Williams, R. M.; Jeffries-Nakamura, B.; Underwood, M. L.; Ryan, M. A.; O'Connor, D.; Kikkert, S.

    1991-01-01

    The basic performance of Alkali Metal Thermal-to-Electric Converter (AMTEC) cells is well understood, and quantitative modeling of the electrode performance has been carried out. Tests have been carried out to evaluate the high temperature performance of critical AMTEC components. Progress made in understanding the relative performance of AMTEC components, such as electrodes, electrolytes, working fluids, and seals, as device operating temperature is varied is discussed. Most metallic components are especially subject to corrosion in hot liquid alkali metals containing dissolved oxides. Stability issues of AMTEC components may be addressed by life testing, accelerated testing, and modeling based on known kinetic and thermochemical data.

  15. The ESO UVES advanced data products quasar sample - VI. Sub-damped Lyman α metallicity measurements and the circumgalactic medium

    NASA Astrophysics Data System (ADS)

    Quiret, S.; Péroux, C.; Zafar, T.; Kulkarni, V. P.; Jenkins, E. B.; Milliard, B.; Rahmani, H.; Popping, A.; Rao, S. M.; Turnshek, D. A.; Monier, E. M.

    2016-06-01

    The circumgalactic medium (CGM) can be probed through the analysis of absorbing systems in the line of sight to bright background quasars. We present measurements of the metallicity of a new sample of 15 sub-damped Lyman α absorbers (sub-DLAs, defined as absorbers with 19.0 < log N(H I) < 20.3) with redshift 0.584 ≤ zabs ≤ 3.104 from the ESO Ultra-Violet Echelle Spectrograph (UVES) Advanced Data Products Quasar Sample (EUADP). We combine these results with other measurements from the literature to produce a compilation of metallicity measurements for 92 sub-DLAs as well as a sample of 362 DLAs. We apply a multi-element analysis to quantify the amount of dust in these two classes of systems. We find that either the element depletion patterns in these systems differ from the Galactic depletion patterns or they have a different nucleosynthetic history than our own Galaxy. We propose a new method to derive the velocity width of absorption profiles, using the modelled Voigt profile features. The correlation between the velocity width ΔV90 of the absorption profile and the metallicity is found to be tighter for DLAs than for sub-DLAs. We report hints of a bimodal distribution in the [Fe/H] metallicity of low redshift (z < 1.25) sub-DLAs, which is unseen at higher redshifts. This feature can be interpreted as a signature from the metal-poor, accreting gas and the metal-rich, outflowing gas, both being traced by sub-DLAs at low redshifts.

  16. Hover performance tests of baseline metal and Advanced Technology Blade (ATB) rotor systems for the XV-15 tilt rotor aircraft

    NASA Technical Reports Server (NTRS)

    Bartie, K.; Alexander, H.; Mcveigh, M.; Lamon, S.; Bishop, H.

    1986-01-01

    Rotor hover performance data were obtained for two full-scale rotor systems designed for the XV-15 Tilt Rotor Research Aircraft. One rotor employed the rectangular planform metal blades (rotor solidity = 0.089) which were used on the initial flight configuration of the XV-15. The second rotor configuration examined the nonlinear taper, composite-construction, Advanced Technology Blade (ATB), (rotor solidity = 0.10) designed to replace the metal blades on the XV-15. Variations of the baseline ATB tip and cuff shapes were also tested. A new six-component rotor force and moment balance designed to obtain highly accurate data over a broad range of thrust and torque conditions is described. The test data are presented in nondimensional coefficient form for the performance results, and in dimensional form for the steady and alternating loads. Some wake and acoustic data are also shown.

  17. Pumped lithium loop test to evaluate advanced refractory metal alloys and simulated nuclear fuel elements

    NASA Technical Reports Server (NTRS)

    Brandenburf, G. P.; Hoffman, E. E.; Smith, J. P.

    1974-01-01

    The performance was determined of refractory metal alloys and uranium nitride fuel element specimens in flowing 1900F (1083C) lithium. The results demonstrate the suitability of the selected materials to perform satisfactorily from a chemical compatibility standpoint.

  18. Advances in high temperature components for AMTEC (alkali metal thermal-to-electric converter)

    SciTech Connect

    Williams, R.M.; Jeffries-Nakamura, B.; Underwood, M.L.; Ryan, M.A.; O'Connor, D.; Kikkert, S.

    1991-01-01

    Long lifetimes are required for AMTEC (or sodium heat engine) components for aerospace and terrestrial applications, and the high heat input temperature as well as the alkali metal liquid and vapor environment places unusual demands on the materials used to construct AMTEC devices. In addition, it is important to maximize device efficiency and power density, while maintaining a long life capability. In addition to the electrode, which must provide both efficient electrode kinetics, transport of the alkali metal, and low electrical resistance, other high temperature components of the cell face equally demanding requirements. The beta{double prime} alumina solid electrolyte (BASE), the seal between the BASE ceramic and its metallic transition to the hot alkali metal (liquid or vapor) source, and metallic components of the device are exposed to hot liquid alkali metal. Modification of AMTEC components may also be useful in optimizing the device for particular operating conditions. In particular, a potassium AMTEC may be expected to operate more efficiently at lower temperatures.

  19. Advances in high temperature components for AMTEC (alkali metal thermal-to-electric converter)

    SciTech Connect

    Williams, R.M.; Jeffries-Nakamura, B.; Underwood, M.L.; Ryan, M.A.; O`Connor, D.; Kikkert, S.

    1991-12-31

    Long lifetimes are required for AMTEC (or sodium heat engine) components for aerospace and terrestrial applications, and the high heat input temperature as well as the alkali metal liquid and vapor environment places unusual demands on the materials used to construct AMTEC devices. In addition, it is important to maximize device efficiency and power density, while maintaining a long life capability. In addition to the electrode, which must provide both efficient electrode kinetics, transport of the alkali metal, and low electrical resistance, other high temperature components of the cell face equally demanding requirements. The beta{double_prime} alumina solid electrolyte (BASE), the seal between the BASE ceramic and its metallic transition to the hot alkali metal (liquid or vapor) source, and metallic components of the device are exposed to hot liquid alkali metal. Modification of AMTEC components may also be useful in optimizing the device for particular operating conditions. In particular, a potassium AMTEC may be expected to operate more efficiently at lower temperatures.

  20. Applications of bacterial cellulose as precursor of carbon and composites with metal oxide, metal sulfide and metal nanoparticles: A review of recent advances.

    PubMed

    Foresti, M L; Vázquez, A; Boury, B

    2017-02-10

    This mini review is limited to very recent studies (last 5-10 years) on two major issues, concerning: the production and physical/chemical modification of bacterial cellulose (BC), and its transformation into carbon and integrated synthesis of metal oxides (TiO2, ZnO, Fe3O4, etc.), metal sulfide (ZnS, CdS, etc.) and metal nanoparticles (Au, Ag, Pt, Pd, etc.) within bacterial cellulose nanoribbons network. We believe that the crossover of these two domains could be of considerable interest in the view of improving the performance of materials prepared with bacterial cellulose. The diversity of these nanomaterials allows targeting of many very different properties/applications: electrochemical devices, catalysis and photocatalysis, sensors, etc. After an introduction to the most important chemical and physical characteristics of BC, production parameters, and its physical and chemical modifications, we review the use of BC as a precursor of inorganic materials like carbon and composites with metal or inorganic nanoparticles.

  1. Advances in the application of plant growth-promoting rhizobacteria in phytoremediation of heavy metals.

    PubMed

    Tak, Hamid Iqbal; Ahmad, Faheem; Babalola, Olubukola Oluranti

    2013-01-01

    In this review, we briefly describe the biological application of PGPR for purposes of phytoremediating heavy metals. We address the agronomic practices that can be used to maximize the remediation potential of plants. Plant roots have limited ability ability mental from soil, mainly because metals have low solubility in the soil solution. The phytoavailability of metal is closely tired to the soil properties and the metabolites that are released by PGPR (e.g., siderophores, organ acids, and plant growth regulators). The role played by PGPR may be accomplished by their direct effect on plant growth dynamics, or indirectly by acidification, chelation, precipitation, or immobilization of heavy metals in the rhizosphere. From performing this review we have formed the following conclusions: The most critical factor is determining how efficient phytoremediation of metal-contaminated soil will be is the rate of uptake of the metal by plants. In turn, this depends on the rate of bioavailability. We know from our review that beneficial bacteria exist tha can alter metal bioavailability of plants. Using these beneficial bacteria improves the performance of phytoremediation of the metal-contaminated sites. Contaminated sites are often nutrient poor. Such soil can be nutrient enriched by applying metal-tolerant microbes that provide key needed plant nutrients. Applying metal-tolerant microbes therefore may be vital in enhancing the detoxification of heavy-metal-contaminated soils (Glick 2003). Plant stress generated by metal-contaminated soils can be countered by enhancing plant defense responses. Responses can be enhanced by alleviating the stress-mediated impact on plants by enzymatic hydrolysis of ACC, which is intermediate in the biosynthetic pathway of ethylene. These plant-microbe partnerships can act as decontaminators by improving phytoremediation. Soil microorganisms play a central role in maintaining soil structure, fertility and in remediating contaminated soils

  2. Windmill Co4 {Co4 (μ4 -O)} with 16 Divergent Branches Forming a Family of Metal-Organic Frameworks: Organic Metrics Control Topology, Gas Sorption, and Magnetism.

    PubMed

    Chen, Qing; Xue, Wei; Lin, Jian-Bin; Wei, Yong-Sheng; Yin, Zheng; Zeng, Ming-Hua; Kurmoo, Mohamedally; Chen, Xiao-Ming

    2016-08-16

    A series of highly connected metal-organic frameworks (MOFs), [Co8 (O)(OH)4 (H2 O)4 (ina)8 ](NO3 )2 ⋅2 C2 H5 OH⋅4 H2 O (1), [Co8 (O)(OH)4 (H2 O)4 (pba)8 ](NO3 )2 ⋅8 C2 H5 OH⋅28 H2 O (2), and [Co8 (O)(OH)4 (H2 O)4 (pbba)8 ](NO3 )2 ⋅guest (3), in which ina=isonicotinate, pba=4-pyridylbenzoate, and pbba=4-(pyridine-4-yl)phenylbenzoate, is reported. These MOFs contain a new secondary building unit (SBU), with a square Co4 (μ4 -O) central unit having the rare μ4 -O(2-) motif, which is decorated by the other four peripheral cobalt atoms through μ3 -OH in a windmill-like shape. This SBU holds 16 divergent connecting organic ligands, pyridyl-carboxylates, to form three different frameworks. The high porosity of desolvated 2 is shown by the efficient gas absorption of N2 , CO2 , CH4 , and H2 . In addition, 1 and 2 exhibit unusual canted antiferromagnetic behavior with spin-glass-like relaxation, with blocking temperatures that are fairly high, 20 K (1) and 10 K (2), for cobalt materials. The relationship between the metal clusters and linkers has been studied, in which the size and rotational degrees of freedom of the ligands are found to control the topology, gas sorption, and magnetic properties.

  3. Constraints on the Distance Moduli, Helium and Metal Abundances, and Ages of Globular Clusters from their RR Lyrae and Non-variable Horizontal-branch Stars. I. M3, M15, and M92

    NASA Astrophysics Data System (ADS)

    VandenBerg, Don A.; Denissenkov, P. A.; Catelan, Márcio

    2016-08-01

    Up-to-date isochrones, zero-age horizontal-branch (ZAHB) loci, and evolutionary tracks for core He-burning stars are applied to the color-magnitude diagrams of M3, M15, and M92, focusing in particular on their RR Lyrae populations. Periods for the ab- and c-type variables are calculated using the latest theoretical calibrations of {log} {P}{ab} and {log} {P}c as a function of luminosity, mass, effective temperature ({T}{{eff}}), and metallicity. Our models are generally able to reproduce the measured periods to well within the uncertainties implied by the stellar properties on which pulsation periods depend, as well as the mean periods and cluster-to-cluster differences in < {P}{ab}> and < {P}c> , on the assumption of well-supported values of E(B-V), {(m-M)}V, and [Fe/H]. While many of RR Lyrae in M3 lie close to the same ZAHB that fits the faintest horizontal-branch (HB) stars at bluer or redder colors, the M92 variables are all significantly evolved stars from ZAHB locations on the blue side of the instability strip. M15 appears to contain a similar population of HB stars as M92, along with additional helium-enhanced populations not present in the latter which comprise most of its RR Lyrae stars. The large number of variables in M15 and the similarity of the observed values of < {P}{ab}> and < {P}c> in M15 and M92 can be explained by HB models that allow for variations in Y. Similar ages (˜12.5 Gyr) are found for all three clusters, making them significantly younger than the field halo subgiant HD 140283. Our analysis suggests a preference for stellar models that take diffusive processes into account.

  4. Advances in post-necking flow curve identification of sheet metal through standard tensile testing

    NASA Astrophysics Data System (ADS)

    Coppieters, Sam; Cooreman, Steven; Debruyne, Dimitri; Kuwabara, Toshihiko

    2013-12-01

    The standard tensile test is still the most common material test to identify the hardening behavior of sheet metal. When using standard equipment and well-known analytical formulas, however, the hardening behavior can only be identified up to the point of maximum uniform elongation. Several methods which deal with the problem of extended flow curve identification of sheet metal through a tensile test have been proposed in the past. This paper gives an overview of the four classes of methods to identify post-necking hardening behavior of sheet metal through tensile testing. In addition, identification methods from the first (average values across the neck), second (Bridgeman correction, modified Siebel and Schwaigerer correction) and third class (special case of the VFM) are used to identify the post-necking hardening behavior of DC05. Finally, these results are used to assess the validity of the different methods.

  5. Advancing our understanding of plant adaptation to metal polluted environments - new insights from Biscutella laevigata

    NASA Astrophysics Data System (ADS)

    Babst-Kostecka, Alicja; Waldmann, Patrik; Frérot, Hélène; Vollenweider, Pierre

    2016-04-01

    The legacy of industrial pollution alters ecosystems, particularly at post-mining sites where metal trace elements have created toxic conditions that trigger rapid plant adaptation. Apart from the purely scientific merits, in-depth knowledge of the mechanisms underlying plant adaptation to metal contamination is beneficial for the economic and societal sectors because of its application in bioengineering (e.g. phytoremediation or biofortification). An important process is the evolution and/or enhancement of metal tolerance, a trait that has predominantly been studied by applying acute metal stress on species that allocate large quantities of certain metals to their foliage (so-called hyperaccumulators). As the vast majority of vascular plants does not hyperaccumulate metals, more efforts are needed to investigate non-hyperaccumulating species and thereby broaden understanding of biological mechanisms underlying metal tolerance. The pseudometallophyte Biscutella laevigata has shown potential in this respect, but its characteristics are insufficiently understood. We determined the zinc tolerance level and various plant responses to environmentally relevant zinc concentrations in ten metallicolous and non-metallicolous B. laevigata populations. In a two-phase hydroponic experiment, we scored multiple morphological and physiological traits (e.g. biomass, visible stress symptoms, element content in foliage) and assessed phenotypic variability within plant families. The structure of these quantitative traits was compared to that of neutral molecular markers to test, whether natural selection caused population differentiation in zinc tolerance. While all genotypes were tolerant compared to a zinc sensitive reference species, we found congruent trends toward higher tolerance in metallicolous compared to non-metallicolous plants. We identified the most indicative parameters for these differences and find that enhanced zinc tolerance in metallicolous populations is driven by

  6. Melons are Branched Polymers

    NASA Astrophysics Data System (ADS)

    Gurau, Razvan; Ryan, James P.

    2014-11-01

    Melonic graphs constitute the family of graphs arising at leading order in the 1/N expansion of tensor models. They were shown to lead to a continuum phase, reminiscent of branched polymers. We show here that they are in fact precisely branched polymers, that is, they possess Hausdorff dimension 2 and spectral dimension 4/3.

  7. A study of advanced magnesium-based hydride and development of a metal hydride thermal battery system

    NASA Astrophysics Data System (ADS)

    Zhou, Chengshang

    Metal hydrides are a group of important materials known as energy carriers for renewable energy and thermal energy storage. A concept of thermal battery based on advanced metal hydrides is studied for heating and cooling of cabins in electric vehicles. The system utilizes a pair of thermodynamically matched metal hydrides as energy storage media. The hot hydride that is identified and developed is catalyzed MgH2 due to its high energy density and enhanced kinetics. TiV0.62Mn1.5, TiMn2, and LaNi5 alloys are selected as the matching cold hydride. A systematic experimental survey is carried out in this study to compare a wide range of additives including transitions metals, transition metal oxides, hydrides, intermetallic compounds, and carbon materials, with respect to their effects on dehydrogenation properties of MgH2. The results show that additives such as Ti and V-based metals, hydride, and certain intermetallic compounds have strong catalytic effects. Solid solution alloys of magnesium are exploited as a way to destabilize magnesium hydride thermodynamically. Various elements are alloyed with magnesium to form solid solutions, including indium and aluminum. Thermodynamic properties of the reactions between the magnesium solid solution alloys and hydrogen are investigated, showing that all the solid solution alloys that are investigated in this work have higher equilibrium hydrogen pressures than that of pure magnesium. Cyclic stability of catalyzed MgH2 is characterized and analyzed using a PCT Sievert-type apparatus. Three systems, including MgH2-TiH 2, MgH2-TiMn2, and MgH2-VTiCr, are examined. The hydrogenating and dehydrogenating kinetics at 300°C are stable after 100 cycles. However, the low temperature (25°C to 150°C) hydrogenation kinetics suffer a severe degradation during hydrogen cycling. Further experiments confirm that the low temperature kinetic degradation can be mainly related the extended hydrogenation-dehydrogenation reactions. Proof

  8. van der Waals Metal-Organic Framework as an Excitonic Material for Advanced Photonics.

    PubMed

    Milichko, Valentin A; Makarov, Sergey V; Yulin, Alexey V; Vinogradov, Alexandr V; Krasilin, Andrei A; Ushakova, Elena; Dzyuba, Vladimir P; Hey-Hawkins, Evamarie; Pidko, Evgeny A; Belov, Pavel A

    2017-01-23

    Synergistic combination of organic and inorganic nature in van der Waals metal-organic frameworks supports different types of robust excitons that can be effectively and independently manipulated by light at room temperature, and opens new concepts for all-optical data processing and storage.

  9. Responses to oxidative and heavy metal stresses in cyanobacteria: recent advances.

    PubMed

    Cassier-Chauvat, Corinne; Chauvat, Franck

    2014-12-31

    Cyanobacteria, the only known prokaryotes that perform oxygen-evolving photosynthesis, are receiving strong attention in basic and applied research. In using solar energy, water, CO2 and mineral salts to produce a large amount of biomass for the food chain, cyanobacteria constitute the first biological barrier against the entry of toxics into the food chain. In addition, cyanobacteria have the potential for the solar-driven carbon-neutral production of biofuels. However, cyanobacteria are often challenged by toxic reactive oxygen species generated under intense illumination, i.e., when their production of photosynthetic electrons exceeds what they need for the assimilation of inorganic nutrients. Furthermore, in requiring high amounts of various metals for growth, cyanobacteria are also frequently affected by drastic changes in metal availabilities. They are often challenged by heavy metals, which are increasingly spread out in the environment through human activities, and constitute persistent pollutants because they cannot be degraded. Consequently, it is important to analyze the protection against oxidative and metal stresses in cyanobacteria because these ancient organisms have developed most of these processes, a large number of which have been conserved during evolution. This review summarizes what is known regarding these mechanisms, emphasizing on their crosstalk.

  10. Advances in Thermal Spray Deposition of Billets for Particle Reinforced Light Metals

    NASA Astrophysics Data System (ADS)

    Wenzelburger, Martin; Zimmermann, Christian; Gadow, Rainer

    2007-04-01

    Forming of light-metals in semi-solid state offers some advantages like low process temperatures, improved mould durability, good flow behavior and fine, globular microstructure of the final material. By the introduction of ceramic particles, increased elastic modulus and yield strength as well as wear resistance and creep behavior can be obtained. By semi-solid forging or semi-solid casting, particle reinforced metals (PRM) can be produced with improved matrix microstructure and beneficial forming process parameters compared to conventional MMC manufacturing techniques. The production of this kind of light metal matrix composites requires the supply of dense semi-finished parts with well defined volume fractions of homogeneously distributed particulate reinforcement. A manufacturing method for cylindrical light metal billets is described that applies thermal spraying as a build-up process for simultaneous deposition of matrix and reinforcement phase with cored wires as spraying material. Thermal spraying leads to small grain sizes and prevents dendrite formation. However, long process cycle times lead to billet heating and recrystallization of the matrix microstructure. In order to preserve small grain sizes that enable semi-solid forming, the thermal spraying process was analyzed by in-flight particle analysis and thermography. As a consequence, the deposition process was optimized by adaptation of the thermal spraying parameters and by application of additional cooling, leading to lower billet temperatures and finer PRM billet microstructure.

  11. [Advance in the bioavailability monitoring of heavy metal based on microbial whole-cell sensor].

    PubMed

    Hou, Qi-Hui; Ma, An-Shou; Zhuang, Xiu-Liang; Zhuang, Guo-Qiang

    2013-01-01

    Microbial whole-cell biosensor is an excellent tool to assess the bioavailability of heavy metal in soil and water. However, the traditional physicochemical instruments are applied to detect the total metal. Furthermore, microbial whole-cell biosensor is simple, rapid and economical in manipulating, and is thus a highly qualified candidate for emergency detection of pollution incidents. The biological component of microbial whole-cell biosensor mostly consists of metalloregulatory proteins and reporter genes. In detail, metalloregulatory proteins mainly include the MerR family, ArsR family and RS family, and reporter genes mainly include gfp, lux and luc. Metalloregulatory protein and reporter gene are related to the sensitivity, specificity and properties in monitoring. The bioavailability of heavy metals is alterable under different conditions, influenced by pH, chelate and detection methods and so on. Increasing the accumulation of intracellular heavy metal, modifying the metalloregulatory proteins and optimizing the detecting conditions are important for improving the sensitivity, specificity and accuracy of the microbial whole-cell biosensor. The future direction of microbial whole-cell biosensor is to realize the monitoring of pollutions in situ and on line.

  12. Responses to Oxidative and Heavy Metal Stresses in Cyanobacteria: Recent Advances

    PubMed Central

    Cassier-Chauvat, Corinne; Chauvat, Franck

    2014-01-01

    Cyanobacteria, the only known prokaryotes that perform oxygen-evolving photosynthesis, are receiving strong attention in basic and applied research. In using solar energy, water, CO2 and mineral salts to produce a large amount of biomass for the food chain, cyanobacteria constitute the first biological barrier against the entry of toxics into the food chain. In addition, cyanobacteria have the potential for the solar-driven carbon-neutral production of biofuels. However, cyanobacteria are often challenged by toxic reactive oxygen species generated under intense illumination, i.e., when their production of photosynthetic electrons exceeds what they need for the assimilation of inorganic nutrients. Furthermore, in requiring high amounts of various metals for growth, cyanobacteria are also frequently affected by drastic changes in metal availabilities. They are often challenged by heavy metals, which are increasingly spread out in the environment through human activities, and constitute persistent pollutants because they cannot be degraded. Consequently, it is important to analyze the protection against oxidative and metal stresses in cyanobacteria because these ancient organisms have developed most of these processes, a large number of which have been conserved during evolution. This review summarizes what is known regarding these mechanisms, emphasizing on their crosstalk. PMID:25561236

  13. Advances in Thermal Spray Deposition of Billets for Particle Reinforced Light Metals

    SciTech Connect

    Wenzelburger, Martin; Zimmermann, Christian; Gadow, Rainer

    2007-04-07

    Forming of light-metals in semi-solid state offers some advantages like low process temperatures, improved mould durability, good flow behavior and fine, globular microstructure of the final material. By the introduction of ceramic particles, increased elastic modulus and yield strength as well as wear resistance and creep behavior can be obtained. By semi-solid forging or semi-solid casting, particle reinforced metals (PRM) can be produced with improved matrix microstructure and beneficial forming process parameters compared to conventional MMC manufacturing techniques. The production of this kind of light metal matrix composites requires the supply of dense semi-finished parts with well defined volume fractions of homogeneously distributed particulate reinforcement. A manufacturing method for cylindrical light metal billets is described that applies thermal spraying as a build-up process for simultaneous deposition of matrix and reinforcement phase with cored wires as spraying material. Thermal spraying leads to small grain sizes and prevents dendrite formation. However, long process cycle times lead to billet heating and recrystallization of the matrix microstructure. In order to preserve small grain sizes that enable semi-solid forming, the thermal spraying process was analyzed by in-flight particle analysis and thermography. As a consequence, the deposition process was optimized by adaptation of the thermal spraying parameters and by application of additional cooling, leading to lower billet temperatures and finer PRM billet microstructure.

  14. On-sun test results from second-generation and advanced-concepts alkali-metal pool-boiler receivers

    SciTech Connect

    Moreno, J.B.; Andraka, C.E.; Moss, T.A.; Cordeiro, P.G.; Dudley, V.E.; Rawlinson, K.S.

    1994-05-01

    Two 75-kW{sub t} alkali-metal pool-boiler solar receivers have been successfully tested at Sandia National Laboratories` National Solar Thermal Test Facility. The first one, Sandia`s `` second-generation pool-boiler receiver,`` was designed to address commercialization issues identified during post-test assessment of Sandia`s first-generation pool-boiler receiver. It was constructed from Haynes alloy 230 and contained the alkali-metal alloy NaK-78. The absorber`s wetted side had a brazed-on powder-metal coating to stabilize boiling. This receiver was evaluated for boiling stability, hot- and warm-restart behavior, and thermal efficiency. Boiling was stable under all conditions. All of the hot restarts were successful. Mild transient hot spots observed during some hot restarts were eliminated by the addition of 1/3 torr of xenon to the vapor space. All of the warm restarts were also successful. The heat-transfer crisis that damaged the first receiver did not recur. Thermal efficiency was 92.3% at 750{degrees}C with 69.6 kW{sub t} solar input. The second receiver tested, Sandia`s ``advanced-concepts receiver,`` was a replica of the first-generation receiver except that the cavities, which were electric-discharge-machined in the absorber for boiling stability, were eliminated. This step was motivated by bench-scale test results that showed that boiling stability improved with increased heated-surface area, tilt of the heated surface from vertical, and added xenon. The bench-scale results suggested that stable boiling might be possible without heated-surface modification in a 75-kW{sub t} receiver. Boiling in the advanced-concepts receiver with 1/3 torr of xenon added has been stable under all conditions, confirming the bench-scale tests.

  15. Genetic and geological imprints of evolutionary advance: A trace metal view

    NASA Astrophysics Data System (ADS)

    Rickaby, R. E.; Williams, B. J.

    2010-12-01

    Life and the chemical environment are united in an escapable feedback cycle. Study of inorganic ions through time, may provide the most insight to this evolving system since metals are common to both, being present in the natural environment and employed as the catalytic centres of metalloenzymes. The conundrum of evolution is that life continually, and inadvertently, catalysed its own chemical challenges. But ultimately this drove life to greater complexity. The most revolutionary time in life’s history, was the advent and proliferation of oxygenic photosynthesis which forced the environment towards a lower carbon, but highly oxic ocean and atmosphere. We show, from model chemical reactions of solubility and complex ion formation, a general trend in the concentration of metal ions such as Ni, Cu, Zn and Cd, which parallels the history of atmospheric oxygen due to the insolubility of their sulfides. As oxygen gradually overcame the redox buffering power of ferrous iron and sulfide, metal availability followed the usual pattern of buffered system of redox change with the larger increase around 1.0 to 0.5 Ga. At the end of this stage the limitations of solution concentration would have been close to those of today being restricted ultimately only by the solubility of carbonates and hydroxide of these elements. The increasing oxidation of the surface environment, therefore, not only challenged life with highly reactive oxygen species but also enhanced the solubility and availability of metals which were initially toxic to life. We compile evidence from the geological record to support this chemical model of a rise in environmental availability of key trace metals. Furthermore, we use DNA analysis of protein evolution of selective metal-binding centres of organisms which show an increase with genome size, not just amongst eubacteria and archaea, but in eukaryotes, to also serve as a rough indication of trace element history, since types and numbers of domains are

  16. Advances in metals classification under the United Nations globally harmonized system of classification and labeling.

    PubMed

    Skeaff, James; Adams, William J; Rodriguez, Patricio; Brouwers, Tony; Waeterschoot, Hugo

    2011-10-01

    This article shows how regulatory obligations mandated for metal substances can be met with a laboratory-based transformation/dissolution (T/D) method for deriving relevant hazard classification outcomes, which can then be linked to attendant environmental protection management decisions. We report the results of a ring-test at 3 laboratories conducted to determine the interlaboratory precision of the United Nations T/D Protocol (T/DP) in generating data for classifying 4 metal-bearing substances for acute and chronic toxicity under the United Nations Globally Harmonized System of Classification and Labelling (GHS) criteria with respect to the aquatic environment. The test substances were Ni metal powder, cuprous oxide (Cu(2) O) powder, tricobalt tetroxide (Co(3) O(4) ) powder, and cuttings of a NILO K Ni-Co-Fe alloy. Following GHS Annex 10 guidelines, we tested 3 loadings (1, 10, and 100 mg/L) of each substance at pH 6 and 8 for 7 or 28 d to yield T/D data for acute and chronic classification, respectively. We compared the T/DP results (dissolved metal in aqueous media) against acute and chronic ecotoxicity reference values (ERVs) for each substance to assess GHS classification outcomes. For dissolved metal ions, the respective acute and chronic ERVs established at the time of the T/D testing were: 29 and 8 µg/L for Cu; 185 and 1.5 µg/L for Co; and 13.3 and 1.0 mg/L for Fe. The acute ERVs for Ni were pH-dependent: 120 and 68 µg/L at pH 6 and 8, respectively, whereas the chronic ERV for Ni was 2.4 µg/L. The acute classification outcomes were consistent among 3 laboratories: cuprous oxide, Acute 1; Ni metal powder, Acute 3; Co(3) O(4) and the NILO K alloy, no classification. We obtained similar consistent results in chronic classifications: Cu(2) O, Ni metal powder, and Co(3) O(4) , Chronic 4; and the NILO K alloy, no classification. However, we observed equivocal results only in 2 of a possible 48 cases where the coefficient of variation of final T

  17. Selection of the reference steam generator for the advanced liquid metal reactor

    SciTech Connect

    Loewen, Eric P.; Boardman, Chuck

    2007-07-01

    In February 2006 President Bush announced the Advanced Energy Initiative, which included the Department of Energy's (DOE) Global Nuclear Energy Partnership (GNEP). GNEP has seven broad goals; one of the major elements being to develop and deploy advanced nuclear fuel recycling technology that includes consuming spent nuclear fuel in an Advanced Recycling Reactor (ARR). DOE is contemplating accelerating the deployment of these technologies to achieve the construction of a commercial scale application of these technologies. DOE now defines this approach as 'two simultaneous tracks: (1) deployment of commercial scale facilities for which advanced technologies are available now or in the near future, and (2) further research and development of transmutation fuels technologies'. GEHitachi Nuclear Energy Americas LLC (GHNEA) believes an integrated technical solution is achievable in the near term to accelerate the commercial demonstration of GNEP infrastructure. The GHNEA ARR concept involves a single integrated recycling facility sized to service a single reactor module ARR capable of destroying light water and fast reactor sourced actinides. This paper describes the bases and rationale behind the selection of the helical coil steam generator (HCSG) as the reference steam generator concept for the ALMR and S-PRISM reactor concepts. (authors)

  18. Complementary Metal-Oxide-Silicon (CMOS)-Memristor Hybrid Nanoelectronics for Advanced Encryption Standard (AES) Encryption

    DTIC Science & Technology

    2016-04-01

    reliability were developed and integrated with CMOS circuitry to establish an efficient hybrid nanoelectronic computing module for Advanced...node integrated with the memristors without leaving the CMOS foundry setting. 15. SUBJECT TERMS nanoelectronics, CMOS, memristor, crossbar 16...Table of Contents 1. SUMMARY ..................................................................................................................... 1 2

  19. Recent advances in transition-metal dichalcogenide based nanomaterials for water splitting

    NASA Astrophysics Data System (ADS)

    Wang, Fengmei; Shifa, Tofik Ahmed; Zhan, Xueying; Huang, Yun; Liu, Kaili; Cheng, Zhongzhou; Jiang, Chao; He, Jun

    2015-11-01

    The desire for sustainable and clean energy future continues to be the concern of the scientific community. Researchers are incessantly targeting the development of scalable and abundant electro- or photo-catalysts for water splitting. Owing to their suitable band-gap and excellent stability, an enormous amount of transition-metal dichalcogenides (TMDs) with hierarchical nanostructures have been extensively explored. Herein, we present an overview of the recent research progresses in the design, characterization and applications of the TMD-based electro- or photo-catalysts for hydrogen and oxygen evolution. Emphasis is given to the layered and pyrite-phase structured TMDs encompassing semiconducting and metallic nanomaterials. Illustrative results and the future prospects are pointed out. This review will provide the readers with insight into the state-of-the-art research progresses in TMD based nanomaterials for water splitting.

  20. Advanced finite element analysis of die wear in sheet-bulk metal forming processes

    NASA Astrophysics Data System (ADS)

    Behrens, Bernd-Arno; Bouguecha, Anas; Vucetic, Milan; Chugreev, Alexander; Rosenbusch, Daniel

    2016-10-01

    The novel sheet-bulk metal forming (SBMF) technology allows the production of solid metal components with various functional design features out of flat sheet specimens. However, due to the high working pressures arising during the forming process the efficiency of SBMF is tightly related to the tool service life, which is mainly limited by die wear. In the forming processes involving high contact pressures (e.g. SBMF) the influence of contact normal stresses on the die wear can be overestimated. In order to provide a realistic estimation of the die wear, the shear friction stress must be considered. The presented paper introduces a die wear model that intends the tangential component of contact stress and its implementation in the commercial FE code.

  1. Metal-Enhanced Chemiluminescence: Advanced Chemiluminescence Concepts for the 21st Century

    PubMed Central

    Aslan, Kadir; Geddes, Chris D.

    2009-01-01

    Chemiluminescent based detection is entrenched throughout the Biosciences today, such as in blotting, analyte and protein quantification and detection. While the biological applications of chemiluminescence are forever growing, the underlying principles of using a probe, an oxidizer and a catalyst (biological, organic or inorganic) have remained mostly unchanged for decades. Subsequently, chemiluminescence based detection is fundamentally limited by the classical photochemical properties of reaction yield, quantum yield, etc. However, for the last 5 years, a new technology has emerged which looks set to fundamentally change the way we both think about and use chemiluminescence today. Metal surface plasmons can amplify chemiluminescence signatures, while low-power microwaves can complete reactions within seconds. In addition, thin metal films, can convert spatially isotopic chemiluminescence into directional emission. In this timely forward looking tutorial review, we survey what could well be the next-generation chemiluminescent based technologies. PMID:19690736

  2. Recent advances on the stimulatory effects of metals in breast cancer.

    PubMed

    Lappano, Rosamaria; Malaguarnera, Roberta; Belfiore, Antonino; Maggiolini, Marcello

    2016-10-17

    Certain environmental chemicals may accumulate in human serum and tissues eliciting estrogenic and/or carcinogenic effects. Therefore, there is heightened interest in determining whether environmental chemicals may increase the risk for endocrine-related tumors like breast cancer. For instance, metals as cadmium, zinc, copper, iron, nickel and aluminum have been shown to mimic estrogen action. Moreover, the exposure to these chemicals has been reported to stimulate diverse malignancies including breast cancer, which is the most common tumor in women worldwide. In this review, we summarize the epidemiologic and experimental evidence regarding the association between the exposure to some trace elements and breast cancer risk. We also address recent insights on the molecular mechanisms involved by metals in breast tumorigenesis.

  3. The movement of particles in liquid metals under gravity forces and the interaction of particles with advancing solid-liquid interface

    NASA Technical Reports Server (NTRS)

    Weinberg, F.

    1984-01-01

    The problems of shrinkage and gas porosity are discussed. Gravity forces enhance the removal of gas bubbles from a metal melt and contribute to the feeding of shrinkage porosity in castings. Experiments are reviewed which determine how large a density difference is required for metal particles to float or sink in a metal melt and to what extent do factors not considered in Stokes Law influence particle movement in a real system. As to the interaction of particles with an advancing solid-liquid interface, the results indicate that the metal particles are not rejected in a metal melt, and that concentrations of particles in a metal following solidification are due to other factors.

  4. Challenges of Electrical Measurements of Advanced Gate Dielectrics in Metal-Oxide-Semiconductor Devices

    NASA Astrophysics Data System (ADS)

    Vogel, Eric M.; Brown, George A.

    2003-09-01

    Experimental measurements and simulations are used to provide an overview of key issues with the electrical characterization of metal-oxide-semiconductor (MOS) devices with ultra-thin oxide and alternate gate dielectrics. Experimental issues associated with the most common electrical characterization method, capacitance-voltage (C-V), are first described. Issues associated with equivalent oxide thickness extraction and comparison, interface state measurement, extrinsic defects, and defect generation are then overviewed.

  5. Nickel-metal hydride electric vehicle batteries through materials science advances

    SciTech Connect

    Venkatesan, S.; Fetcenko, M.A.; Corrigan, D.A.; Gifford, P.R.; Dhar, S.K.; Ovshinsky, S.R.

    1995-12-31

    Proprietary, multicomponent hydrogen storage materials have been developed making use of the principles of disorder by atomic engineering of the short-range and intermediate-range order. These materials form the basis for Ovonic Nickel-Metal Hydride batteries which have emerged as the leading battery technology for electric vehicle applications. Ovonic Batteries have the highest volumetric energy density available extending the practical range of electric vehicles from under 100 miles to over 200 miles.

  6. Recent advances in transition metal phosphide nanomaterials: synthesis and applications in hydrogen evolution reaction.

    PubMed

    Shi, Yanmei; Zhang, Bin

    2016-03-21

    The urgent need of clean and renewable energy drives the exploration of effective strategies to produce molecular hydrogen. With the assistance of highly active non-noble metal electrocatalysts, electrolysis of water is becoming a promising candidate to generate pure hydrogen with low cost and high efficiency. Very recently, transition metal phosphides (TMPs) have been proven to be high performance catalysts with high activity, high stability, and nearly ∼100% Faradic efficiency in not only strong acidic solutions, but also in strong alkaline and neutral media for electrochemical hydrogen evolution. In this tutorial review, an overview of recent development of TMP nanomaterials as catalysts for hydrogen generation with high activity and stability is presented. The effects of phosphorus (P) on HER activity, and their synthetic methods of TMPs are briefly discussed. Then we will demonstrate the specific strategies to further improve the catalytic efficiency and stability of TMPs by structural engineering. Making use of TMPs as cocatalysts and catalysts in photochemical and photoelectrochemical water splitting is also discussed. Finally, some key challenges and issues which should not be ignored during the rapid development of TMPs are pointed out. These strategies and challenges of TMPs are instructive for designing other high-performance non-noble metal catalysts.

  7. Advanced material and approach for metal ions removal from aqueous solutions

    PubMed Central

    Turhanen, Petri A.; Vepsäläinen, Jouko J.; Peräniemi, Sirpa

    2015-01-01

    A Novel approach to remove metals from aqueous solutions has been developed. The method is based on a resin free, solid, non-toxic, microcrystalline bisphosphonate material, which has very low solubility in water (59 mg/l to ion free Milli-Q water and 13 mg/l to 3.5% NaCl solution). The material has been produced almost quantitatively on a 1 kg scale (it has been prepared also on a pilot scale, ca. 7 kg) and tested successfully for its ability to collect metal cations from different sources, such as ground water and mining process waters. Not only was this material highly efficient at collecting several metal ions out of solution it also proved to be regenerable and reusable over a number of adsorption/desorption, which is crucial for environmental friendliness. This material has several advantages compared to the currently used approaches, such as no need for any precipitation step. PMID:25758924

  8. Impact of post metal annealing on gate work function engineering for advanced MOS applications

    NASA Astrophysics Data System (ADS)

    Kumar, S. Sachin; Prasad, Amitesh; Sinha, Amrita; Raut, Pratikhya; Das, Palash; Mahato, S. S.; Mallik, S.

    2016-05-01

    Ultra thin HfO2 high-k gate dielectric has been deposited directly on strained Si0.81Ge0.19 by Atomic Layer Deposition (ALD) technique. The influence of different types of metal gate electrodes (Al, Au, Pt) on electrical characteristics of Metal-Oxide-Semiconductor capacitors has been studied. Our results show that the electrical characteristics of MOS device are highly dependent on the gate electrodes used. The dependency of electrical characteristics on post metal annealing was studied in detail. The measured flat band (Vfb) and hysteresis (ΔVfb) from high frequency C-V characteristics were used to study the pre-existing traps in the dielectric. Impact of PMA on interface state density (Dit), border trap density (Nbt) and oxide trap density (Qf/q) of high-k gate stack were also examined for all the devices. The Nbt and frequency dispersion significantly reduces to ~2.77x1010 cm-2 and ~11.34 % respectively in case of Al electrode with a Dit value of ~4x1012 eV-1cm-2 after PMA (350°C) in N2, suggesting an improvement in device performance while Pt electrode shows a much less value of ΔVfb (~0.02 V) and Dit (~3.44x1012 eV-1cm-2) after PMA.

  9. Hydrothermally modified fly ash for heavy metals and dyes removal in advanced wastewater treatment

    NASA Astrophysics Data System (ADS)

    Visa, Maria; Chelaru, Andreea-Maria

    2014-06-01

    Fly ash resulted from coal burning is a waste that can be used in wastewater treatment for removal of dyes and heavy metals by adsorption. Class "F" fly ash (FA), collected from the Central Heat and Power (CHP) Plant Brasov (Romania), with oxides composition SiO2/Al2O3 over 2.4 was used for obtaining a new substrate with good adsorption capacity for dyes and heavy metals from wastewater. A new material was obtained from modified fly ash with NaOH and hexadecyltrimethylammonium bromide (HTAB) a cationic surfactant. Contact time, optimum amount of substrate and the pH corresponding to 50 mL solution of pollutants were the parameters optimized for obtaining the maximum efficiency in the adsorption process. The optimized adsorption parameters were further used in thermodynamic and kinetic studies of the adsorption processes. The adsorption kinetic mechanisms, and the substrate capacities are further discussed correlated with the surface structure (XRD), composition (EDS, FTIR), and morphology (SEM, AFM). The results indicate that the novel nano-substrate composite with fly ash modified can be used as an efficient and low cost adsorbent for simultaneous removal of dyes and heavy metals, the resulted water respects the discharge regulations.

  10. Probing the bioinorganic chemistry of toxic metals in the mammalian bloodstream to advance human health.

    PubMed

    Gailer, Jürgen

    2012-03-01

    The etiology of numerous grievous human diseases, including Alzheimer's and Parkinson's Disease is not well understood. Conversely, the concentration toxic metals and metalloids, such as As, Cd, Hg and Pb in human blood of the average population is well established, yet we know strikingly little about the role that they might play in the etiology of disease processes. Establishing functional connections between the chronic exposure of humans to these and other inorganic pollutants and the etiology of certain human diseases is therefore viewed by many as one of the greatest challenges in the post-genomic era. Conceptually, this task requires us to uncover hitherto unknown biomolecular mechanisms which must explain how small doses of a toxic metal/metalloid compound (low μg per day) - or mixtures thereof - may eventually result in a particular human disease. The biological complexity that is inherently associated with mammals, however, makes the discovery of these mechanisms a truly monumental task. Recent findings suggest that a better understanding of the bioinorganic chemistry of inorganic pollutants in the mammalian bloodstream represents a fruitful strategy to unravel relevant biomolecular mechanisms. The adverse effect(s) that toxic metals/metalloid compounds exert on the transport of essential ultratrace elements to internal organs appear particularly pertinent. A brief overview of the effect that arsenite and Hg(2+) exert on the mammalian metabolism of selenium is presented.

  11. Recent advances in biodegradable metals for medical sutures: a critical review.

    PubMed

    Seitz, Jan-Marten; Durisin, Martin; Goldman, Jeremy; Drelich, Jaroslaw W

    2015-09-16

    Sutures that biodegrade and dissolve over a period of several weeks are in great demand to stitch wounds and surgical incisions. These new materials are receiving increased acceptance across surgical procedures whenever permanent sutures and long-term care are not needed. Unfortunately, both inflammatory responses and adverse local tissue reactions in the close-to-stitching environment are often reported for biodegradable polymeric sutures currently used by the medical community. While bioabsorbable metals are predominantly investigated and tested for vascular stent or osteosynthesis applications, they also appear to possess adequate bio-compatibility, mechanical properties, and corrosion stability to replace biodegradable polymeric sutures. In this Review, biodegradable alloys made of iron, magnesium, and zinc are critically evaluated as potential materials for the manufacturing of soft and hard tissue sutures. In the case of soft tissue closing and stitching, these metals have to compete against currently available degradable polymers. In the case of hard tissue closing and stitching, biodegradable sternal wires could replace the permanent sutures made of stainless steel or titanium alloys. This Review discusses the specific materials and degradation properties required by all suture materials, summarizes current suture testing protocols and provides a well-grounded direction for the potential future development of biodegradable metal based sutures.

  12. Development of advanced techniques for identification of flow stress and friction parameters for metal forming analysis

    NASA Astrophysics Data System (ADS)

    Cho, Hyunjoong

    The accuracy of process simulation in metal forming by finite element method depends on the accuracy of flow stress data and friction value that are input to FEM programs. Therefore, it is essential that these input values are determined using reliable tests and evaluation methods. This study presents the development of inverse analysis methodology and its application to determine flow stress data of bulk and sheet materials at room and elevated temperatures. The inverse problem is defined as the minimization of the differences between the experimental measurements and the corresponding FEM predictions. Rigid-viscoplastic FEM is used to analyze the metal flow while a numerical optimization algorithm adjusts the material parameters used in the simulation until the calculated response matches the measured data within a specified tolerance. The use of the developed inverse analysis methodology has been demonstrated by applying it to the selected reference rheological tests; cylinder compression test, ring compression test, instrumented indentation test, modified limiting dome height test, and sheet hydraulic bulge test. Furthermore, using the determined material property data, full 3-D finite element simulation models, as examples of industrial applications for orbital forming and thermoforming processes have been developed for reliable process simulation. As results of this study, it was shown that the developed inverse analysis methodology could identify both the material parameters and friction factors from one set of tests, simultaneously. Therefore, this technique can offer a systematic and cost effective way for determining material property data for simulation of metal forming processes.

  13. Materials Test Branch

    NASA Technical Reports Server (NTRS)

    Gordon, Gail

    2012-01-01

    The Materials Test Branch resides at Marshall Space Flight Center's Materials and Processing laboratory and has a long history of supporting NASA programs from Mercury to the recently retired Space Shuttle. The Materials Test Branch supports its customers by supplying materials testing expertise in a wide range of applications. The Materials Test Branch is divided into three Teams, The Chemistry Team, The Tribology Team and the Mechanical Test Team. Our mission and goal is to provide world-class engineering excellence in materials testing with a special emphasis on customer service.

  14. Design of the reactor vessel inspection robot for the advanced liquid metal reactor

    SciTech Connect

    Spelt, P.F.; Crane, C.; Feng, L.; Abidi, M.; Tosunoglu, S.

    1994-06-01

    A consortium of four universities and Oak Ridge National Laboratory designed a prototype wall-crawling robot to perform weld inspection in an advanced nuclear reactor. The restrictions of the inspection environment presented major challenges to the team. These challenges were met in the prototype, which has been tested in a mock non-hostile environment and shown to perform as expected, as detailed in this report.

  15. Recent Advances in Metal-Organic Frameworks for Heterogeneous Catalyzed Organic Transformations

    SciTech Connect

    Sabale, Sandip R.; Zheng, Jian; Vemuri, Venkata Rama Ses; Yu, Xiao-Ying; McGrail, Bernard P.; Motkuri, Radha K.

    2016-12-12

    In this review, we have summarized the recent advances in MOF based heterogeneous catalytic chemistry. Catalytic performance of various configurations of MOFs such as active sites, post synthetic modification and MOF derived catalyst, has been summarized in the context of various organic transformation reactions. Post synthetic modification of MOFs via functionalization of organic linkers with active catalytic moieties was deliberated. Also, efficacy of carbonaceous catalysts derived from MOFs was discussed.

  16. Metal Organic Chemical Vapor Deposition of Oxide Films for Advanced Applications

    DTIC Science & Technology

    2000-06-01

    recirculating forced convection flow in the system. Samples are heated by a fixed radiative heater below the rotating susceptor. Thermophoresis ...technology. FOCUS ON ZINC OXIDE TCO A natural outgrowth of display technology efforts is the development of advanced transparent and...studies emphasized surface morphology and preferred orientation effects , rather than the electrical and optical properties of ZnO films[1]. ZnO ceramics

  17. Lightweight, High Strength Metals With Enhanced Radiation Shielding - Technology Advancing Partnerships Challenge Project

    NASA Technical Reports Server (NTRS)

    Wright, Maria Clara (Compiler)

    2015-01-01

    The Technology Advancing Partnership (TAP) Challenge will seek to foster innovation throughout the Center by allowing the KSC workforce to identify a specific technology idea that needs improvement and to then work with an external partner to develop that technology. This Challenge will enable competitive partnerships with outside entities that will increase the value by bringing leveraged resources. The selected proposal from the University of Florida will develop new lightweight technologies with radiation mitigation for spacecraft.

  18. On Minkowskian branching structures

    NASA Astrophysics Data System (ADS)

    Wroński, Leszek; Placek, Tomasz

    In Belnap's [Branching space-time. Synthese, 92, 385-434. 'Postprint' archived at http://philsci-archive.pitt.edu/archive/00001003] theory of branching space-times (BST) Our World's possible histories are thought of as space-times, yet the theory has models in which histories do not resemble relativistic space-times or any other physical space-times. The aim of this paper is to define a certain class of BST models, called 'Minkowskian Branching Structures' (MBSs), in which histories are isomorphic to Minkowski space-time. By focusing on these models rather than on general BST models, we hope that one may be able to improve on earlier BST analyses of physical phenomena. Also, introducing MBSs sets the stage for recent discussions about whether or not branching is physically feasible.

  19. The Olive Branch Awards.

    ERIC Educational Resources Information Center

    Harnack, William

    1984-01-01

    The first annual Olive Branch Awards, sponsored by the Writers' and Publishers Alliance and the Editors' Organizing Committee, were given to ten magazines, out of 60 that submitted entries. Winning entries are described briefly. (IM)

  20. A review of advanced metallic and ceramic materials suitable for high temperature use in space structures

    NASA Astrophysics Data System (ADS)

    Bashford, David

    Spacecraft, satellites and launch vehicles require efficient, lightweight structural materials. At present, the structural requirements can be largely met by aluminium alloys and polymeric matrix composites based on carbon fibres. However, increasingly there will be a need to specify materials capable of sustaining operational use at temperatures in excess of 250°C and towards 2000°C. Ambitious spaceplane projects such as Hermes, HOTOL, Sanger, HOPE and NASP have highlighted this need. Within the operational temperature band 250°C to 2000°C various metallic and ceramic materials are appropriate for consideration, either in alloy or composite form. This review paper identifies the status of technology on the following: i) Aluminium and titanium alloys and their composites. ii) Superalloys and their composites. iii) Carbon, glass-ceramic and ceramic matrix composites. The development of more weight efficient and thermally stable metallic and ceramic materials has centred on a number of key areas (1). For metallics, improved alloy composition and grain refinement from Rapidly Solidified Powders have given improvements in strength retention at high temperatures (a). The introduction of reinforcements, either particulate, whisker or continuous fibre, have improved the basic alloys by reducing density, increasing stiffness and strength and extending thermal capabilities. Monolithic ceramics possess thermal stability but are inherently brittle and crack sensitive. The addition of ceramic fibres and whiskers has the effect of modifying fracture characteristics by introducing "pseudo-ductility" to raise apparent toughness. In the foreseeable future the emerging high temperature materials will find uses in: Spaceplane substructures and control surfaces; Thermal protection systems and insulation; Propulsion plants and thruster units; Air breathing engines.

  1. Recent advances in noble metal based composite nanocatalysts: colloidal synthesis, properties, and catalytic applications

    NASA Astrophysics Data System (ADS)

    Xu, Yong; Chen, Lei; Wang, Xuchun; Yao, Weitang; Zhang, Qiao

    2015-06-01

    This Review article provides a report on progress in the synthesis, properties and catalytic applications of noble metal based composite nanomaterials. We begin with a brief discussion on the categories of various composite materials. We then present some important colloidal synthetic approaches to the composite nanostructures; here, major attention has been paid to bimetallic nanoparticles. We also introduce some important physiochemical properties that are beneficial from composite nanomaterials. Finally, we highlight the catalytic applications of such composite nanoparticles and conclude with remarks on prospective future directions.

  2. A new class of solid oxide metal-air redox batteries for advanced stationary energy storage

    NASA Astrophysics Data System (ADS)

    Zhao, Xuan

    Cost-effective and large-scale energy storage technologies are a key enabler of grid modernization. Among energy storage technologies currently being researched, developed and deployed, rechargeable batteries are unique and important that can offer a myriad of advantages over the conventional large scale siting- and geography- constrained pumped-hydro and compressed-air energy storage systems. However, current rechargeable batteries still need many breakthroughs in material optimization and system design to become commercially viable for stationary energy storage. This PhD research project investigates the energy storage characteristics of a new class of rechargeable solid oxide metal-air redox batteries (SOMARBs) that combines a regenerative solid oxide fuel cell (RSOFC) and hydrogen chemical-looping component. The RSOFC serves as the "electrical functioning unit", alternating between the fuel cell and electrolysis mode to realize discharge and charge cycles, respectively, while the hydrogen chemical-looping component functions as an energy storage unit (ESU), performing electrical-chemical energy conversion in situ via a H2/H2O-mediated metal/metal oxide redox reaction. One of the distinctive features of the new battery from conventional storage batteries is the ESU that is physically separated from the electrodes of RSOFC, allowing it to freely expand and contract without impacting the mechanical integrity of the entire battery structure. This feature also allows an easy switch in the chemistry of this battery. The materials selection for ESU is critical to energy capacity, round-trip efficiency and cost effectiveness of the new battery. Me-MeOx redox couples with favorable thermodynamics and kinetics are highly preferable. The preliminary theoretical analysis suggests that Fe-based redox couples can be a promising candidate for operating at both high and low temperatures. Therefore, the Fe-based redox-couple systems have been selected as the baseline for this

  3. Recent advances in porous polyoxometalate-based metal-organic framework materials.

    PubMed

    Du, Dong-Ying; Qin, Jun-Sheng; Li, Shun-Li; Su, Zhong-Min; Lan, Ya-Qian

    2014-07-07

    Polyoxometalate (POM)-based metal-organic framework (MOF) materials contain POM units and generally generate MOF materials with open networks. POM-based MOF materials, which utilize the advantages of both POMs and MOFs, have received increasing attention, and much effort has been devoted to their preparation and relevant applications over the past few decades. They have good prospects in catalysis owing to the electronic and physical properties of POMs that are tunable by varying constituent elements. In this review, we present recent developments in porous POM-based MOF materials, including their classification, synthesis strategies, and applications, especially in the field of catalysis.

  4. Alkali metal pool boiler life tests for a 25 kWe advanced Stirling conversion system

    NASA Technical Reports Server (NTRS)

    Anderson, W. G.; Rosenfeld, J. H.; Noble, J.

    1991-01-01

    The overall operating temperature and efficiency of solar-powered Stirling engines can be improved by adding an alkali metal pool boiler heat transport system to supply heat more uniformly to the heater head tubes. One issue with liquid metal pool boilers is unstable boiling. Stable boiling is obtained with an enhanced boiling surface containing nucleation sites that promote continuous boiling. Over longer time periods, it is possible that the boiling behavior of the system will change. An 800-h life test was conducted to verify that pool boiling with the chosen fluid/surface combination remains stable as the system ages. The apparatus uses NaK boiling on a - 100 + 140 stainless steel sintered porous layer, with the addition of a small amount of xenon. Pool boiling remained stable to the end of life test. The pool boiler life test included a total of 82 cold starts, to simulate startup each morning, and 60 warm restarts, to simulate cloud cover transients. The behavior of the cold and warm starts showed no significant changes during the life test. In the experiments, the fluid/surface combination provided stable, high-performance boiling at the operating temperature of 700 C. Based on these experiments, a pool boiler was designed for a full-scale 25-kWe Stirling system.

  5. Advanced liquid-metal-reactor development at ANL during the 1980s

    SciTech Connect

    Wade, D.C. )

    1990-01-01

    The fundamental long-term rationale for the liquid-metal reactor (LMR) remains unchanged - to provide for resource extension by consuming the more abundant isotope of uranium. The design goals for the next generation of breeder reactors include a concerted effort to provide engineering solutions that can positively impact on the technical issues and on the public perception issues that harry the current generation of commercial power reactors. The work at Argonne National Laboratory since late 1983 has approached these design goals for the next-generation-reactor enterprise as a whole and has based the approach on a closed, fissile-self-sufficient, transuranic-self-consuming fuel cycle that employs a uranium/plutonium metallic alloy fuel form. Pyrometallurgically based reprocessing and remote injection casting fuel refabrication form the basis on which the closed fuel cycle is expected to provide low fuel cycle costs even on an incremental dedicated fuel cycle facility basis. Passive safety features that decouple reactor shutdown and decay heat removal from reliance on balance-of-plant equipment form the basis for reduced capital costs. Preapproved licensing form the basis for shorter and more predictable construction cycles. Incomplete fission product separation and incomplete uranium/plutonium separation of the product streams provide for a deterrent to subnational diversion. Finally, the waste management strategy is based on pyrometallurgical reprocessing in which all transuranics can be made to follow the plutonium-rich product stream.

  6. Characterization of the dimensional stability of advanced metallic materials using an optical test bench structure

    NASA Technical Reports Server (NTRS)

    Hsieh, Cheng; O'Donnell, Timothy P.

    1991-01-01

    The dimensional stability of low-density high specific-strength metal-matrix composites (including 30 vol pct SiC(p)/SXA 24-T6 Al, 25 vol pct SiC(p)/6061-T6 Al, 40 vol pct graphite P100 fiber/6061 Al, 50 vol pct graphite P100 fiber/6061 Al, and 40 vol pct P100 graphite fiber/AZ91D Mg composites) and an Al-Li-Mg metal alloy was evaluated using a specially designed five-strut optical test bench structure. The structure had 30 thermocouple locations, one retroreflector, one linear interferometer multilayer insulation, and various strip heaters. It was placed in a 10 exp -7 torr capability vacuum chamber with a laser head positioned at a window port, and a laser interferometer system for collecting dimensional change data. It was found that composite materials have greater 40-C temporal dimensional stability than the AL-Li-Mg alloy. Aluminum-based composites demonstrated better 40-C temporal stability than Mg-based composites.

  7. Transition Metal Phosphide Nanoparticles Supported on SBA-15 as Highly Selective Hydrodeoxygenation Catalysts for the Production of Advanced Biofuels.

    PubMed

    Yang, Yongxing; Ochoa-Hernández, Cristina; de la Peña O'Shea, Víctor A; Pizarro, Patricia; Coronado, Juan M; Serrano, David P

    2015-09-01

    A series of catalysts constituted by nanoparticles of transition metal (M = Fe, Co, Ni and Mo) phosphides (TMP) dispersed on SBA-15 were synthesized by reduction of the corresponding metal phosphate precursors previously impregnated on the mesostructured support. All the samples contained a metal-loading of 20 wt% and with an initial M/P mole ratio of 1, and they were characterized by X-ray diffraction (XRD), N2 sorption, H2-TPR and transmission electron microscopy (TEM). Metal phosphide nanocatalysts were tested in a high pressure continuous flow reactor for the hydrodeoxygenation (HDO) of a methyl ester blend containing methyl oleate (C17H33-COO-CH3) as main component (70%). This mixture constitutes a convenient surrogate of triglycerides present in vegetable oils, and following catalytic hydrotreating yields mainly n-alkanes. The results of the catalytic assays indicate that Ni2P/SBA-15 catalyst presents the highest ester conversion, whereas the transformation rate is about 20% lower for MoP/SBA-15. In contrast, catalysts based on Fe and Co phosphides show a rather limited activity. Hydrocarbon distribution in the liquid product suggests that both hydrodeoxygenation and decarboxylation/decarbonylation reactions occur simultaneously over the different catalysts, although MoP/SBA-15 possess a selectivity towards hydrodeoxygenation exceeding 90%. Accordingly, the catalyst based on MoP affords the highest yield of n-octadecane, which is the preferred product in terms of carbon atom economy. Subsequently, in order to conjugate the advantages of both Ni and Mo phosphides, a series of catalysts containing variable proportions of both metals were prepared. The obtained results reveal that the mixed phosphides catalysts present a catalytic behavior intermediate between those of the monometallic phosphides. Accordingly, only marginal enhancement of the yield of n-octadecane is obtained for the catalysts with a Mo/Ni ratio of 3. Nevertheless, owing to this high selectivity

  8. Materials considerations in the design of a metal-hydride heat pump for an advanced extravehicular mobility unit

    NASA Technical Reports Server (NTRS)

    Liebert, B. E.

    1986-01-01

    A metal-hydride heat pump (HHP) has been proposed to provide an advanced regenerable nonventing thermal sink for the liquid-cooled garment worn during an extravehicular activity (EVA). The conceptual design indicates that there is a potential for significant advantages over the one presently being used by shuttle crew personnel as well as those that have been proposed for future use with the space station. Compared to other heat pump designs, a HHP offers the potential for extended use with no electrical power requirements during the EVA. In addition, a reliable, compact design is possible due to the absence of moving parts other than high-reliability check valves. Because there are many subtleties in the properties of metal hydrides for heat pump applications, it is essential that a prototype hydride heat pump be constructed with the selected materials before a committment is made for the final design. Particular care must be given to the evaporator heat exchanger worn by the astronaut since the performance of hydride heat pumps is generally heat transfer limited.

  9. Three-dimensional thermal-hydraulic analysis of an advanced liquid metal reactor design by the COMMIX computer code

    SciTech Connect

    Shin, Y.W.

    1991-01-01

    The emphasis in the development of advanced liquid metal reactors (LMRs) is on inherent safety and economics. One such feature is the adoption of thermal radiation and natural-convection cooling of the reactor to handle decay heat following a reactor shutdown. The decay heat removal feature of the LMR design under investigation here involves an in-vessel overflow of hot-pool sodium next to the reactor vessel (RV) in such a way that in the event of a reactor heat-up due to decay heat, the RV temperature is elevated and thereby the rate of heat removal from the reactor to the ambient air is increased. The purpose is to limit the temperature rise due to the decay heat. The objective of this study is to evaluate the performance of the simple passive decay heat removal feature of an advanced LMR design based on radiation and natural convection. The evaluation was carried out by performing calculations using the COMMIX Code for two cases, one with the passive heat removal features and the other without the features, and comparing the results. 2 refs., 6 figs., 1 tab.

  10. Advanced liquid metal reactor fuel and blanket designs using HT9

    SciTech Connect

    Bridges, A.E.; Waltar, A.E.; Leggett, R.D.; Baker, R.B.; Gneiting, B.C.

    1991-08-01

    This paper discusses the results of the Core Demonstration Experiment being irradiated in the US Department of Energy's Fast Flux Test Facility. The CDE clearly demonstrates that mixed-oxide fuel can achieve burnups in excess of 200 MWd/kgM and fast fluences in excess of 30 {times} 10{sup 22} n/cm{sup 2} using the very low swelling ferritic-martensitic alloy, HT9. Supporting data from post-irradiation examination of the ACO-1 experiment, a related fuel test for the CDE, is reported and compared to the existing austenitic database. Additionally, the current status of a follow-on program to test metal fuel using HT9 is reviewed. 22 refs., 6 figs.

  11. Advances in Molten Oxide Electrolysis for the Production of Oxygen and Metals from Lunar Regolith

    NASA Technical Reports Server (NTRS)

    Sadoway, Donald R.; Sirk, Aislinn; Sibille, Laurent; Melendez, Orlando; Lueck, Dale; Curreri, Peter; Dominquez, Jesus; Whitlow, Jonathan

    2008-01-01

    As part of an In-Situ Resource Utilization infrastructure to sustain long term-human presence on the lunar surface, the production of oxygen and metals by electrolysis of lunar regolith has been the subject of major scrutiny. There is a reasonably large body of literature characterizing the candidate solvent electrolytes, including ionic liquids, molten salts, fluxed oxides, and pure molten regolith itself. In the light of this information and in consideration of available electrolytic technologies, the authors have determined that direct molten oxide electrolysis at temperatures of approx 1600 C is the most promising avenue for further development. Results from ongoing studies as well as those of previous workers will be presented. Topics include materials selection and testing, electrode stability, gas capture and analysis, and cell operation during feeding and tapping.

  12. Advanced Testing Techniques to Measure the PWSCC Resistance of Alloy 690 and its Weld Metals

    SciTech Connect

    P.Andreson

    2004-10-01

    Wrought Alloy 600 and its weld metals (Alloy 182 and Alloy 82) were originally used in pressurized water reactors (PWRs) due to the material's inherent resistance to general corrosion in a number of aggressive environments and because of a coefficient of thermal expansion that is very close to that of low alloy and carbon steel. Over the last thirty years, stress corrosion cracking in PWR primary water (PWSCC) has been observed in numerous Alloy 600 component items and associated welds, sometimes after relatively long incubation times. The occurrence of PWSCC has been responsible for significant downtime and replacement power costs. As part of an ongoing, comprehensive program involving utilities, reactor vendors and engineering/research organizations, this report will help to ensure that corrosion degradation of nickel-base alloys does not limit service life and that full benefit can be obtained from improved designs for both replacement components and new reactors.

  13. Recent Advances in Modeling Transition Metal Oxides for Photo-electrochemistry

    NASA Astrophysics Data System (ADS)

    Caspary Toroker, Maytal

    Computational research offers a wide range of opportunities for materials science and engineering, especially in the energy arena where there is a need for understanding how material composition and structure control energy conversion, and for designing materials that could improve conversion efficiency. Potential inexpensive materials for energy conversion devices are metal oxides. However, their conversion efficiency is limited by at least one of several factors: a too large band gap for efficiently absorbing solar energy, similar conduction and valence band edge characters that may lead to unfavorably high electron-hole recombination rates, a valence band edge that is not positioned well for oxidizing water, low stability, low electronic conductivity, and low surface reactivity. I will show how we model metal oxides with ab-initio methods, primarily DFT +U. Our previous results show that doping with lithium, sodium, or hydrogen could improve iron (II) oxide's electronic properties, and alloying with zinc or nickel could improve iron (II) oxide's optical properties. Furthermore, doping nickel (II) oxide with lithium could improve several key properties including solar energy absorption. In this talk I will highlight new results on our understanding of the mechanism of iron (III) oxide's surface reactivity. Our theoretical insights bring us a step closer towards understanding how to design better materials for photo-electrochemistry. References: 1. O. Neufeld and M. Caspary Toroker, ``Pt-doped Fe2O3 for enhanced water splitting efficiency: a DFT +U study'', J. Phys. Chem. C 119, 5836 (2015). 2. M. Caspary Toroker, ``Theoretical Insights into the Mechanism of Water Oxidation on Non-stoichiometric and Ti - doped Fe2O3 (0001)'', J. Phys. Chem. C, 118, 23162 (2014). This research was supported by the Morantz Energy Research Fund, the Nancy and Stephen Grand Technion Energy Program, the I-CORE Program of the Planning and Budgeting Committee, and The Israel Science

  14. High-resolution imaging of hypervelocity metal jets using advanced high-speed photographic techniques

    SciTech Connect

    Shaw, L.L.; Muelder, S.A.

    1995-08-29

    It is now possible to obtain high resolution sequential photographs of the initial formation and evolution of hypervelocity metal jets formed by shaped charge devices fired in air. Researchers have been frustrated by the high velocity of the jet material and the luminous sheath of hot gases cloaking the jet that made detailed observation of the jet body extremely difficult. The camera system that provides the photographs is a large format multi-frame electro-optic camera, referred to as an IC camera (IC stands for image converter), that utilizes electro-optic shuttering, monochromatic pulsed laser illumination and bandpass filtering to provide sequential pictures (in 3D if desired) with minimal degradation due to luminous air shocks or motion blur. The large format (75mm image plane), short exposure (15 ns minimum), ruby laser illumination and bandpass filtering (monochromatic illumination while excluding extraneous light) produces clear, sharp, images of the detailed surface structure of a metal shaped charge jet during early jet formation, elongation of the jet body, jet tip evolution and subsequent particulation (breakup) of the jet body. By utilizing the new camera system in conjunction with the more traditional rotating mirror high speed cameras, pulsed radiography, and electrical sensors, a maximum amount of, often unique, data can be extracted from a single experiment. This paper was intended primarily as an oral presentation. For purposes of continuity and simplicity in these proceedings, the authors have chosen to concentrate on the development of the IC camera system and its impact on the photography of high speed shaped chargejets.

  15. Design and Test of Advanced Thermal Simulators for an Alkali Metal-Cooled Reactor Simulator

    NASA Technical Reports Server (NTRS)

    Garber, Anne E.; Dickens, Ricky E.

    2011-01-01

    The Early Flight Fission Test Facility (EFF-TF) at NASA Marshall Space Flight Center (MSFC) has as one of its primary missions the development and testing of fission reactor simulators for space applications. A key component in these simulated reactors is the thermal simulator, designed to closely mimic the form and function of a nuclear fuel pin using electric heating. Continuing effort has been made to design simple, robust, inexpensive thermal simulators that closely match the steady-state and transient performance of a nuclear fuel pin. A series of these simulators have been designed, developed, fabricated and tested individually and in a number of simulated reactor systems at the EFF-TF. The purpose of the thermal simulators developed under the Fission Surface Power (FSP) task is to ensure that non-nuclear testing can be performed at sufficiently high fidelity to allow a cost-effective qualification and acceptance strategy to be used. Prototype thermal simulator design is founded on the baseline Fission Surface Power reactor design. Recent efforts have been focused on the design, fabrication and test of a prototype thermal simulator appropriate for use in the Technology Demonstration Unit (TDU). While designing the thermal simulators described in this paper, effort were made to improve the axial power profile matching of the thermal simulators. Simultaneously, a search was conducted for graphite materials with higher resistivities than had been employed in the past. The combination of these two efforts resulted in the creation of thermal simulators with power capacities of 2300-3300 W per unit. Six of these elements were installed in a simulated core and tested in the alkali metal-cooled Fission Surface Power Primary Test Circuit (FSP-PTC) at a variety of liquid metal flow rates and temperatures. This paper documents the design of the thermal simulators, test program, and test results.

  16. 10 CFR 110.41 - Executive Branch review.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... export involving assistance to end uses related to isotope separation, chemical reprocessing, heavy water... isotope uranium-235, and those categories of exports approved in advance by the Executive Branch...

  17. Processing of solid solution, mixed uranium/refractory metal carbides for advanced space nuclear power and propulsion systems

    NASA Astrophysics Data System (ADS)

    Knight, Travis Warren

    Nuclear thermal propulsion (NTP) and space nuclear power are two enabling technologies for the manned exploration of space and the development of research outposts in space and on other planets such as Mars. Advanced carbide nuclear fuels have been proposed for application in space nuclear power and propulsion systems. This study examined the processing technologies and optimal parameters necessary to fabricate samples of single phase, solid solution, mixed uranium/refractory metal carbides. In particular, the pseudo-ternary carbide, UC-ZrC-NbC, system was examined with uranium metal mole fractions of 5% and 10% and corresponding uranium densities of 0.8 to 1.8 gU/cc. Efforts were directed to those methods that could produce simple geometry fuel elements or wafers such as those used to fabricate a Square Lattice Honeycomb (SLHC) fuel element and reactor core. Methods of cold uniaxial pressing, sintering by induction heating, and hot pressing by self-resistance heating were investigated. Solid solution, high density (low porosity) samples greater than 95% TD were processed by cold pressing at 150 MPa and sintering above 2600 K for times longer than 90 min. Some impurity oxide phases were noted in some samples attributed to residual gases in the furnace during processing. Also, some samples noted secondary phases of carbon and UC2 due to some hyperstoichiometric powder mixtures having carbon-to-metal ratios greater than one. In all, 33 mixed carbide samples were processed and analyzed with half bearing uranium as ternary carbides of UC-ZrC-NbC. Scanning electron microscopy, x-ray diffraction, and density measurements were used to characterize samples. Samples were processed from powders of the refractory mono-carbides and UC/UC 2 or from powders of uranium hydride (UH3), graphite, and refractory metal carbides to produce hypostoichiometric mixed carbides. Samples processed from the constituent carbide powders and sintered at temperatures above the melting point of UC

  18. Advances in Stereoconvergent Catalysis from 2005 to 2015: Transition-Metal-Mediated Stereoablative Reactions, Dynamic Kinetic Resolutions, and Dynamic Kinetic Asymmetric Transformations.

    PubMed

    Bhat, Vikram; Welin, Eric R; Guo, Xuelei; Stoltz, Brian M

    2017-03-08

    Stereoconvergent catalysis is an important subset of asymmetric synthesis that encompasses stereoablative transformations, dynamic kinetic resolutions, and dynamic kinetic asymmetric transformations. Initially, only enzymes were known to catalyze dynamic kinetic processes, but recently various synthetic catalysts have been developed. This Review summarizes major advances in nonenzymatic, transition-metal-promoted dynamic asymmetric transformations reported between 2005 and 2015.

  19. A case of strong metal-support interactions: combining advanced microscopy and model systems to elucidate the atomic structure of interfaces.

    PubMed

    Willinger, Marc G; Zhang, Wei; Bondarchuk, Oleksandr; Shaikhutdinov, Shamil; Freund, Hans-Joachim; Schlögl, Robert

    2014-06-02

    A symbiosis of advanced scanning probe and electron microscopy and a well-defined model system may provide a detailed picture of interfaces on nanostructured catalytic systems. This was demonstrated for Pt nanoparticles supported on iron oxide thin films which undergo encapsulation by supporting oxide as a result of strong metal-support interactions.

  20. Pen Branch delta expansion

    SciTech Connect

    Nelson, E.A.; Christensen, E.J.; Mackey, H.E.; Sharitz, R.R.; Jensen, J.R.; Hodgson, M.E.

    1984-02-01

    Since 1954, cooling water discharges from K Reactor ({anti X} = 370 cfs {at} 59 C) to Pen Branch have altered vegetation and deposited sediment in the Savannah River Swamp forming the Pen Branch delta. Currently, the delta covers over 300 acres and continues to expand at a rate of about 16 acres/yr. Examination of delta expansion can provide important information on environmental impacts to wetlands exposed to elevated temperature and flow conditions. To assess the current status and predict future expansion of the Pen Branch delta, historic aerial photographs were analyzed using both basic photo interpretation and computer techniques to provide the following information: (1) past and current expansion rates; (2) location and changes of impacted areas; (3) total acreage presently affected. Delta acreage changes were then compared to historic reactor discharge temperature and flow data to see if expansion rate variations could be related to reactor operations.

  1. Development of spin-on metal hardmask (SOMHM) for advanced node

    NASA Astrophysics Data System (ADS)

    Yamada, Shintaro; Wang, Deyan; Chuang, Vivian; Liu, Cong; Wong, Sabrina; Clark, Michael B.; Cutler, Charlotte; Williams, William; Baranowski, Paul; Li, Mingqi; Mattia, Joe; Leonard, JoAnne; Trefonas, Peter; O'Connell, Kathleen; Xu, Cheng bai

    2015-03-01

    With the continuous demand for higher performance of computer chips and memories, device patterns and structures are becoming smaller and more complicated. Hard mask processes have been implemented in various steps in the devise manufacturing, and requirements for those materials are versatile. In this paper, novel organometal materials are presented as a new class of spin on solution in order to support the hard mask process. Type of metals, formulation scheme and processing conditions were carefully designed to meet the fundamental requirements as a spin on solution, and their characteristic properties were investigated in comparison to other conventional films such as spin on carbons (SOC), organic bottom anti-reflective coatings (oBARC) and inorganic films formed by chemical vapor deposition (CVD). Several advantages were identified with these SOMHM materials over other films which include 1) better thermal stability than SOC once fully cured, 2) reworkable with industry standard wet chemistry such as SC-1 where conventional Si-BARC is difficult to remove, 3) a wide range of optical constants to suppress reflection for photoresist imaging, 4) high etch resistance and 5) better gap filling property. Curing conditions showed a significant impact on the performance of SOMHM films, and X-ray photoelectron spectroscopy (XPS) was utilized to elucidate the trends. With SOMHM film as a BARC, photolithographic imaging was demonstrated under ArF immersion conditions with 40nm linewidth patterning.

  2. Transient bowing of core assemblies in advanced liquid metal fast reactors

    SciTech Connect

    Kamal, S.A.; Orechwa, Y.

    1986-01-01

    Two alternative core restraint concepts are considered for a conceptual design of a 900 MWth liquid metal fast reactor core with a heterogeneous layout. The two concepts, known as limited free bowing and free flowering, are evaluated based on core bowing criteria that emphasize the enhancement of inherent reactor safety. The core reactivity change during a postulated loss of flow transient is calculated in terms of the lateral displacements and displacement-reactivity-worths of the individual assemblies. The NUBOW-3D computer code is utilized to determine the assembly deformations and interassembly forces that arise when the assemblies are subjected to temperature gradients and irradiation induced creep and swelling during the reactor operation. The assembly ducts are made of the ferritic steel HT-9 and remain in the reactor core for four-years at full power condition. Whereas both restraint systems meet the bowing criteria, a properly designed limited free bowing system appears to be more advantageous than a free flowering system from the point of view of enhancing the reactor inherent safety.

  3. Immobilization of Metal-Organic Framework Nanocrystals for Advanced Design of Supported Nanocatalysts.

    PubMed

    Li, Ping; Zeng, Hua Chun

    2016-11-02

    In recent years, metal-organic frameworks (MOFs) have been employed as heterogeneous catalysts or precursors for synthesis of catalytic materials. However, conventional MOFs and their derivatives usually exhibit limited mass transfer and modest catalytic activities owing to a lengthy diffusion path and less exposed active sites. In contrast, it has been generally conceived that nanoscale MOFs are beneficial to materials utilization and mass transport, but their instability poses a serious issue to practical application. To tackle above challenges, herein we develop a novel and facile approach to the design and synthesis of nanocomposites through in situ growth and directed immobilization of nanoscale MOFs onto layered double hydroxides (LDH). The resulting supported nano-MOFs inherit advantages of pristine MOF nanocrystals and meanwhile gain enhanced stability and workability under reactive environments. A series of uniform nanometer-sized MOFs, including monometallic (ZIF-8, ZIF-67, and Cu-BTC) and bimetallic (CoZn-ZIF), can be readily synthesized onto hierarchically structured flowerlike MgAl-LDH supports with high dispersion and precision. Additionally, the resultant MgAl-LDH/MOFs can serve as a generic platform to prepare integrated nanocatalysts via controlled thermolysis. Knoevenagel condensation and reduction of 4-nitrophenol (4-NP) are used as model reactions for demonstrating the technological merits of these nanocatalysts. Therefore, this work elucidates that the synthetic immobilization of nanoscale MOFs onto conventional catalyst supports is a viable route to develop integrated nanocatalysts with high controllability over structural architecture and chemical composition.

  4. The growth and analysis of transition metal oxide superlattices using advanced magnetometry techniques

    NASA Astrophysics Data System (ADS)

    Danaher, David J.

    Magnetic superlattices are the subject of increasing interest in the condensed matter community due to the consequences that arise from their reduced dimensionality. Such aspects make these superlattices useful in various electronic applications. High quality films of transition metal oxides SrRuO3 and SrMnO3, were grown by pulsed laser deposition (PLD) method in order to gain a further understanding of the parameters that determine the magnetic properties of such films. X-ray reflectivity was used to verify film thickness and quality, while the magnetic properties of the film and of the individual layers were probed using a superconducting quantum interference device (SQUID) and x-ray magnetic circular dichroism (XMCD). Some of the effects observed were expected, including enhanced coercivity, but others were more unexpected, such as anti-ferromagnetic coupling between thin layers of SrMnO3 and SrRuO3. This coupling was conspicuously absent in samples with thicker SrMnO3 layers. These results serve to further illuminate the basic properties of ferromagnetic/anti-ferromagnetic multilayers and have brought us closer to being able to individually manipulate the magnetic properties of such systems.

  5. FY 1992 Measurements and Characterization Branch annual report

    SciTech Connect

    Dippo, P.C

    1993-03-01

    The Measurements and Characterization Branch actively supports the advancement of DOE/NREL goals for the development and implementation of the solar photovoltaic (PV) technology. The primary focus of the laboratories is to provide state-of-the-art analytical capabilities for materials and device characterization and fabrication. The branch houses a comprehensive facility that Is capable of providing information on the full range of PV components. A major objective of the branch is to aggressively pursue collaborative research with other government laboratories, universities, and industrial firms for the advancement of Pv technologies. Members of the branch disseminate research findings to the technical community in publications and presentations. The Measurements and Characterization Branch encompasses seven coordinated research groups, providing integrated research and development that covers all aspects of photovoltaic materials/devices characterization.

  6. Brite-Euram programme: ACOUFAT acoustic fatigue and related damage tolerance of advanced composite and metallic structures

    NASA Astrophysics Data System (ADS)

    Tougard, D.

    1994-09-01

    The Brite/Euram programme ACOUFAT is concerned with 'Acoustic fatigue and related damage tolerance of advanced composite and metallic structure'. Three main fields of the ACOUFAT results are discussed: (1) The use of a 'frequency degradation' criterion, usually applied to classical metallic materials and early Carbon Fiber Reinforced Plastic (CFRP) materials, is not considered suitable, as the only parameter, for determination of CFRP specimen 'failure' in acoustic fatigue. It is suggested that a suitable criterion should be based, in further work, upon the degradation of the mechanical properties of the specimens; (2) On the basis of Wind-Tunnel (WT) calibration tests, a semi-empirical model of the spatio-temporal characteristics of the aero-acoustic loads exerted on a flat panel by the turbulent field created by a flap has been developed and utilized as 'Load Data Input' for Finite Element (FE) calculations. The WT tests have been reasonably well presented: the development of this semi-empirical model is an encouraging initial success. The results from the initial modelling suggest that this can be extended to the modelling of the acoustic loads in Progressive Wave Tubes (PWT); and (3) The excitation of structures by aero-acoustic loads may not be simulated fully in PWT by simply modifying and correctly shaping the spectral content. The effect of the spatial distribution of the loading is clearly different in both cases and the tested specimen endurance may be significantly different. It is clear that a theoretical approach based on a correct prediction of the responses to both types of environment is required.

  7. Radioiodinated branched carbohydrates

    DOEpatents

    Goodman, Mark M.; Knapp, Jr., Furn F.

    1989-01-01

    A radioiodinated branched carbohydrate for tissue imaging. Iodine-123 is stabilized in the compound by attaching it to a vinyl functional group that is on the carbohydrate. The compound exhibits good uptake and retention and is promising in the development of radiopharmaceuticals for brain, heart and tumor imaging.

  8. Front Range Branch Officers

    NASA Astrophysics Data System (ADS)

    The Front Range Branch of AGU has installed officers for 1990: Ray Noble, National Center for Atmospheric Research, chair; Sherry Oaks, U.S. Geological Survey, chair-elect; Howard Garcia, NOAA, treasurer; Catharine Skokan, Colorado School of Mines, secretary. JoAnn Joselyn of NOAA is past chair. Members at large are Wallace Campbell, NOAA; William Neff, USGS; and Stephen Schneider, NCAR.

  9. Branching space-times

    NASA Astrophysics Data System (ADS)

    Placek, Tomasz; Müller, Thomas

    The five papers presented below have been selected from among the fourteen read at the European Science Foundation workshop Branching Space-Times (BST), held at the Jagiellonian University in Kraków, Poland, in October 2005. This event gathered for the first time leading researchers working on this subject.

  10. Recent Advances in the Field of Bionanotechnology: An Insight into Optoelectric Bacteriorhodopsin, Quantum Dots, and Noble Metal Nanoclusters

    PubMed Central

    Knoblauch, Christopher; Griep, Mark; Friedrich, Craig

    2014-01-01

    Molecular sensors and molecular electronics are a major component of a recent research area known as bionanotechnology, which merges biology with nanotechnology. This new class of biosensors and bioelectronics has been a subject of intense research over the past decade and has found application in a wide variety of fields. The unique characteristics of these biomolecular transduction systems has been utilized in applications ranging from solar cells and single-electron transistors (SETs) to fluorescent sensors capable of sensitive and selective detection of a wide variety of targets, both organic and inorganic. This review will discuss three major systems in the area of molecular sensors and electronics and their application in unique technological innovations. Firstly, the synthesis of optoelectric bacteriorhodopsin (bR) and its application in the field of molecular sensors and electronics will be discussed. Next, this article will discuss recent advances in the synthesis and application of semiconductor quantum dots (QDs). Finally, this article will conclude with a review of the new and exciting field of noble metal nanoclusters and their application in the creation of a new class of fluorescent sensors. PMID:25340449

  11. Multiscale Modeling of Inclusions and Precipitation Hardening in Metal Matrix Composites: Application to Advanced High-Strength Steels

    SciTech Connect

    Askari, Hesam; Zbib, Hussein M.; Sun, Xin

    2013-06-01

    In this study, the strengthening effect of inclusions and precipitates in metals is investigated within a multiscale approach that utilizes models at various length scales, namely, Molecular Mechanics (MM), discrete Dislocation Dynamics (DD), and an Eigenstrain Inclusion Method (EIM). Particularly, precipitates are modeled as hardsoft particles whose stress fields interact with dislocations. The stress field resulting from the elastic mismatch between the particles and the matrix is accounted for through the EIM. While the MM method is employed for the purpose of developing rules for DD for short range interaction between a single dislocation and an inclusion, the DD method is used to predict the strength of the composite resulting from the interaction between ensembles of dislocations and particles. As an application to this method, the mechanical behavior of Advanced High Strength Steel (AHSS) is investigated and the results are then compared to the experimental data. The results show that the finely dispersive precipitates can strengthen the material by pinning the dislocations up to a certain shear stress and retarding the recovery, as well as annihilation of dislocations. The DD results show that strengthening due to nano sized particles is a function of the density and size of the precipitates. This size effect is then explained using a mechanistic model developed based on dislocation-particle interaction.

  12. Branching structure and strain hardening of branched metallocene polyethylenes

    SciTech Connect

    Torres, Enrique; Li, Si-Wan; Costeux, Stéphane; Dealy, John M.

    2015-09-15

    There have been a number of studies of a series of branched metallocene polyethylenes (BMPs) made in a solution, continuous stirred tank reactor (CSTR) polymerization. The materials studied vary in branching level in a systematic way, and the most highly branched members of the series exhibit mild strain hardening. An outstanding question is which types of branched molecules are responsible for strain hardening in extension. This question is explored here by use of polymerization and rheological models along with new data on the extensional flow behavior of the most highly branched members of the set. After reviewing all that is known about the effects of various branching structures in homogeneous polymers and comparing this with the structures predicted to be present in BMPs, it is concluded that in spite of their very low concentration, treelike molecules with branch-on-branch structure provide a large number of deeply buried inner segments that are essential for strain hardening in these polymers.

  13. Overview of Glenn Mechanical Components Branch Research

    NASA Astrophysics Data System (ADS)

    Zakrajsek, James

    2002-09-01

    Mr. James Zakrajsek, chief of the Mechanical Components Branch, gave an overview of research conducted by the branch. Branch members perform basic research on mechanical components and systems, including gears and bearings, turbine seals, structural and thermal barrier seals, and space mechanisms. The research is focused on propulsion systems for present and advanced aerospace vehicles. For rotorcraft and conventional aircraft, we conduct research to develop technology needed to enable the design of low noise, ultra safe geared drive systems. We develop and validate analytical models for gear crack propagation, gear dynamics and noise, gear diagnostics, bearing dynamics, and thermal analyses of gear systems using experimental data from various component test rigs. In seal research we develop and test advanced turbine seal concepts to increase efficiency and durability of turbine engines. We perform experimental and analytical research to develop advanced thermal barrier seals and structural seals for current and next generation space vehicles. Our space mechanisms research involves fundamental investigation of lubricants, materials, components and mechanisms for deep space and planetary environments.

  14. Pathways toward high-performance perovskite solar cells: review of recent advances in organo-metal halide perovskites for photovoltaic applications

    NASA Astrophysics Data System (ADS)

    Song, Zhaoning; Watthage, Suneth C.; Phillips, Adam B.; Heben, Michael J.

    2016-04-01

    Organo-metal halide perovskite-based solar cells have been the focus of intense research over the past five years, and power conversion efficiencies have rapidly been improved from 3.8 to >21%. This article reviews major advances in perovskite solar cells that have contributed to the recent efficiency enhancements, including the evolution of device architecture, the development of material deposition processes, and the advanced device engineering techniques aiming to improve control over morphology, crystallinity, composition, and the interface properties of the perovskite thin films. The challenges and future directions for perovskite solar cell research and development are also discussed.

  15. Combustion Branch Website Development

    NASA Technical Reports Server (NTRS)

    Bishop, Eric

    2004-01-01

    The NASA combustion branch is a leader in developing and applying combustion science to focused aerospace propulsion systems concepts. It is widely recognized for unique facilities, analytical tools, and personnel. In order to better communicate the outstanding research being done in this Branch to the public and other research organization, a more substantial website was desired. The objective of this project was to build an up-to-date site that reflects current research in a usable and attractive manner. In order to accomplish this, information was requested from all researchers in the Combustion branch, on their professional skills and on the current projects. This information was used to fill in the Personnel and Research sections of the website. A digital camera was used to photograph all personnel and these photographs were included in the personnel section as well. The design of the site was implemented using the latest web standards: xhtml and external css stylesheets. This implementation conforms to the guidelines recommended by the w3c. It also helps to ensure that the web site is accessible by disabled users, and complies with Section 508 Federal legislation (which mandates that all Federal websites be accessible). Graphics for the new site were generated using the gimp (www.gimp.org) an open-source graphics program similar to Adobe Photoshop. Also, all graphics on the site were of a reasonable size (less than 20k, most less than 2k) so that the page would load quickly. Technologies such as Macromedia Flash and Javascript were avoided, as these only function on some clients which have the proper software installed or enabled. The website was tested on different platforms with many different browsers to ensure there were no compatibility issues. The website was tested on windows with MS IE 6, MSIE 5 , Netscape 7, Mozilla and Opera. On a Mac, the site was tested with MS IE 5 , Netscape 7 and Safari.

  16. Flight Dynamics Analysis Branch

    NASA Technical Reports Server (NTRS)

    Stengle, Tom; Flores-Amaya, Felipe

    2000-01-01

    This report summarizes the major activities and accomplishments carried out by the Flight Dynamics Analysis Branch (FDAB), Code 572, in support of flight projects and technology development initiatives in fiscal year 2000. The report is intended to serve as a summary of the type of support carried out by the FDAB, as well as a concise reference of key accomplishments and mission experience derived from the various mission support roles. The primary focus of the FDAB is to provide expertise in the disciplines of flight dynamics, spacecraft trajectory, attitude analysis, and attitude determination and control. The FDAB currently provides support for missions and technology development projects involving NASA, government, university, and private industry.

  17. Strigolactone inhibition of shoot branching.

    PubMed

    Gomez-Roldan, Victoria; Fermas, Soraya; Brewer, Philip B; Puech-Pagès, Virginie; Dun, Elizabeth A; Pillot, Jean-Paul; Letisse, Fabien; Matusova, Radoslava; Danoun, Saida; Portais, Jean-Charles; Bouwmeester, Harro; Bécard, Guillaume; Beveridge, Christine A; Rameau, Catherine; Rochange, Soizic F

    2008-09-11

    A carotenoid-derived hormonal signal that inhibits shoot branching in plants has long escaped identification. Strigolactones are compounds thought to be derived from carotenoids and are known to trigger the germination of parasitic plant seeds and stimulate symbiotic fungi. Here we present evidence that carotenoid cleavage dioxygenase 8 shoot branching mutants of pea are strigolactone deficient and that strigolactone application restores the wild-type branching phenotype to ccd8 mutants. Moreover, we show that other branching mutants previously characterized as lacking a response to the branching inhibition signal also lack strigolactone response, and are not deficient in strigolactones. These responses are conserved in Arabidopsis. In agreement with the expected properties of the hormonal signal, exogenous strigolactone can be transported in shoots and act at low concentrations. We suggest that endogenous strigolactones or related compounds inhibit shoot branching in plants. Furthermore, ccd8 mutants demonstrate the diverse effects of strigolactones in shoot branching, mycorrhizal symbiosis and parasitic weed interaction.

  18. Branching toughens fibrous networks.

    PubMed

    Koh, C T; Oyen, M L

    2012-08-01

    Fibrous collagenous networks are not only stiff but also tough, due to their complex microstructures. This stiff yet tough behavior is desirable for both medical and military applications but it is difficult to reproduce in engineering materials. While the nonlinear hyperelastic behavior of fibrous networks has been extensively studied, the understanding of toughness is still incomplete. Here, we identify a microstructure mimicking the branched bundles of a natural type I collagen network, in which partially cross-linked long fibers give rise to novel combinations of stiffness and toughness. Finite element analysis shows that the stiffness of fully cross-linked fibrous networks is amplified by increasing the fibril length and cross-link density. However, a trade-off of such stiff networks is reduced toughness. By having partially cross-linked networks with long fibrils, the networks have comparable stiffness and improved toughness as compared to the fully cross-linked networks. Further, the partially cross-linked networks avoid the formation of kinks, which cause fibril rupture during deformation. As a result, the branching allows the networks to have stiff yet tough behavior.

  19. Pen Branch Fault Program

    SciTech Connect

    Price, V.; Stieve, A.L.; Aadland, R.

    1990-09-28

    Evidence from subsurface mapping and seismic reflection surveys at Savannah River Site (SRS) suggests the presence of a fault which displaces Cretaceous through Tertiary (90--35 million years ago) sediments. This feature has been described and named the Pen Branch fault (PBF) in a recent Savannah River Laboratory (SRL) paper (DP-MS-88-219). Because the fault is located near operating nuclear facilities, public perception and federal regulations require a thorough investigation of the fault to determine whether any seismic hazard exists. A phased program with various elements has been established to investigate the PBF to address the Nuclear Regulatory Commission regulatory guidelines represented in 10 CFR 100 Appendix A. The objective of the PBF program is to fully characterize the nature of the PBF (ESS-SRL-89-395). This report briefly presents current understanding of the Pen Branch fault based on shallow drilling activities completed the fall of 1989 (PBF well series) and subsequent core analyses (SRL-ESS-90-145). The results are preliminary and ongoing: however, investigations indicate that the fault is not capable. In conjunction with the shallow drilling, other activities are planned or in progress. 7 refs., 8 figs., 1 tab.

  20. Recursive Branching Simulated Annealing Algorithm

    NASA Technical Reports Server (NTRS)

    Bolcar, Matthew; Smith, J. Scott; Aronstein, David

    2012-01-01

    This innovation is a variation of a simulated-annealing optimization algorithm that uses a recursive-branching structure to parallelize the search of a parameter space for the globally optimal solution to an objective. The algorithm has been demonstrated to be more effective at searching a parameter space than traditional simulated-annealing methods for a particular problem of interest, and it can readily be applied to a wide variety of optimization problems, including those with a parameter space having both discrete-value parameters (combinatorial) and continuous-variable parameters. It can take the place of a conventional simulated- annealing, Monte-Carlo, or random- walk algorithm. In a conventional simulated-annealing (SA) algorithm, a starting configuration is randomly selected within the parameter space. The algorithm randomly selects another configuration from the parameter space and evaluates the objective function for that configuration. If the objective function value is better than the previous value, the new configuration is adopted as the new point of interest in the parameter space. If the objective function value is worse than the previous value, the new configuration may be adopted, with a probability determined by a temperature parameter, used in analogy to annealing in metals. As the optimization continues, the region of the parameter space from which new configurations can be selected shrinks, and in conjunction with lowering the annealing temperature (and thus lowering the probability for adopting configurations in parameter space with worse objective functions), the algorithm can converge on the globally optimal configuration. The Recursive Branching Simulated Annealing (RBSA) algorithm shares some features with the SA algorithm, notably including the basic principles that a starting configuration is randomly selected from within the parameter space, the algorithm tests other configurations with the goal of finding the globally optimal

  1. Synthesis of branched polysaccharides with tunable degree of branching.

    PubMed

    Ciric, Jelena; Loos, Katja

    2013-03-01

    An in vitro enzyme-catalyzed tandem reaction using the enzymes phosphorylase b from rabbit muscle and Deinococcus geothermalis glycogen branching enzyme (Dg GBE) to obtain branched polyglucans with tunable degree of branching (2% ÷ 13%) is presented. The tunable degree of branching is obtained by varying the reaction conditions such as pH value, the choice of reducing agent and its concentration and reaction time. Linear amylose is formed by the phosphorylase-catalyzed propagation of glucose-1-phosphate while Dg GBE introduces branching points on the α-(1→6) position by relocating short oligosaccharide chains. Our results show that the best way to obtain different degrees of branching with this set of enzymes is by regulation of the reaction time.

  2. Photovoltaic Program Branch annual report, FY 1989

    SciTech Connect

    Summers, K A

    1990-03-01

    This report summarizes the progress of the Photovoltaic (PV) Program Branch of the Solar Energy Research Institute (SERI) from October 1, 1988, through September 30, 1989. The branch is responsible for managing the subcontracted portion of SERI's PV Advanced Research and Development Project. In fiscal year (FY) 1989, this included nearly 50 subcontracts, with a total annualized funding of approximately $13.1 million. Approximately two-thirds of the subcontracts were with universities, at a total funding of nearly $4 million. The six technical sections of the report cover the main areas of the subcontracted program: Amorphous Silicon Research, Polycrystalline Thin Films, Crystalline Silicon Materials Research, High-Efficiency Concepts, New Ideas, and University Participation. Technical summaries of each of the subcontracted programs provide a discussion of approaches, major accomplishments in FY 1989, and future research directions. Each report will be cataloged individually.

  3. Trapping of branched DNA in microfabricated structures.

    PubMed Central

    Volkmuth, W D; Duke, T; Austin, R H; Cox, E C

    1995-01-01

    We have observed electrostatic trapping of tribranched DNA molecules undergoing electrophoresis in a microfabricated pseudo-two-dimensional array of posts. Trapping occurs in a unique transport regimen in which the electrophoretic mobility is extremely sensitive to polymer topology. The arrest of branched polymers is explained by considering their center-of-mass motion; in certain conformations, owing to the constraints imposed by the obstacles a molecule cannot advance without the center of mass first moving a short distance backwards. The depth of the resulting local potential well can be much greater than the thermal energy so that escape of an immobilized molecule can be extremely slow. We summarize the expected behavior of the mobility as a function of field strength and topology and point out that the microfabricated arrays are highly suitable for detecting an extremely small number of branched molecules in a very large population of linear molecules. Images Fig. 2 PMID:7624337

  4. ADVANCES IN BIOTREATMENT OF ACID MINE DRAINAGE AND BIORECOVERY OF METALS: 2. MEMBRANE BIOREACTOR SYSTEM FOR SULFATE REDUCTION

    EPA Science Inventory

    Acid-mine drainage (AMD) is a severe pollution problem attributed to past mining activities. AMD is an acidic, metal-bearing wastewater generated by the oxidation of metal sulfides to sulfates by Thiobacillus bacteria in both the active and abandoned mining operations. The wastew...

  5. Synthesis of graphene-supported noble metal hybrid nanostructures and their applications as advanced electrocatalysts for fuel cells.

    PubMed

    Zhu, Chengzhou; Dong, Shaojun

    2013-11-21

    Graphene (GN) is an emerging carbon material that may soon find practical applications. With its unusual properties, GN is an ideal platform for constructing a series of GN-based functional nanomaterials. Among them, GN/noble metal hybrids become one of the families of composite materials with extraordinary properties by combining the advantages of noble metal nanostructures and GN. The recent progress in the synthesis of GN/noble metal hybrids is presented first, such as in situ solution based methods, electrochemical deposition methods, self-assembly and other methods. Then, the applications of these novel GN/noble metal hybrids in fuel cells are summarized and discussed. Future research trends and challenges of design and synthesis of GN/noble metal hybrids are proposed.

  6. Methods and Technologies Branch (MTB)

    Cancer.gov

    The Methods and Technologies Branch focuses on methods to address epidemiologic data collection, study design and analysis, and to modify technological approaches to better understand cancer susceptibility.

  7. Branches in the Everett interpretation

    NASA Astrophysics Data System (ADS)

    Cunningham, Arthur J.

    2014-05-01

    Hugh Everett III describes a quantum measurement as resulting in the "branching" of the quantum state of observer and measured system, with all possible measurement outcomes represented by the ensuing branches of the total quantum state. But Everett does not specify a general rule for decomposing a quantum state into branches, and commentators have long puzzled over how, and even whether, to regard Everett's notion of branching states as physically meaningful. It is common today to appeal to decoherence considerations as a way of giving physical content to the Everettian notion of branches, but these appeals to decoherence are often regarded as considerations foreign to Everett's own approach. This paper contends that this assessment is only half right: though he does not invoke environmental decoherence, Everett does appeal to decoherence considerations, broadly understood, in his treatment of measurement. Careful consideration of his idealized models of measurement, and of the significance he ascribes to the branching of states corresponding to definite measurement outcomes, reveals that his notion of branching refers to a special physical characteristic of elements of a particular decomposition, namely the absence of interference between these component states as a result of the particular dynamics governing the evolution of the system. Characterizations of branching that appeal to the results of modern decoherence theory should therefore be regarded as a natural development of Everett's own physically meaningful conception of branching.

  8. Standard Giant Branches in the Washington Photometric System

    NASA Astrophysics Data System (ADS)

    Geisler, Doug; Sarajedini, Ata

    1999-01-01

    We have obtained CCD photometry in the Washington system C, T_1 filters for some 850,000 objects associated with 10 Galactic globular clusters and two old open clusters. These clusters have well-known metal abundances, spanning a metallicity range of 2.5 dex from [Fe/H]~-2.25 to +0.25 at a spacing of ~0.2 dex. Two independent observations were obtained for each cluster, and internal checks, as well as external comparisons with existing photoelectric photometry, indicate that the final colors and magnitudes have overall uncertainties of <~0.03 mag. Analogous to the method employed by Da Costa & Armandroff for V, I photometry, we then proceed to construct standard [M_T_1, (C-T_1)_0] giant branches for these clusters adopting the Lee et al. distance scale, using some 350 stars per globular cluster to define the giant branch. We then determine the metallicity sensitivity of the (C-T_1)_0 color at a given M_T_1 value. The Washington system technique is found to have 3 times the metallicity sensitivity of the V, I technique. At M_T_1=-2 (about a magnitude below the tip of the giant branch, roughly equivalent to M_I=-3), the giant branches of 47 Tuc and M15 are separated by 1.16 mag in (C-T_1)_0 and only 0.38 mag in (V-I)_0. Thus, for a given photometric accuracy, metallicities can be determined 3 times more precisely with the Washington technique. We find a linear relationship between (C-T_1)_0 (at M_T_1=-2) and metallicity (on the Zinn scale) exists over the full metallicity range, with an rms of only 0.04 dex. We also derive metallicity calibrations for M_T_1=-2.5 and -1.5, as well as for two other metallicity scales. The Washington technique retains almost the same metallicity sensitivity at faint magnitudes, and indeed the standard giant branches are still well separated even below the horizontal branch. The photometry is used to set upper limits in the range 0.03-0.09 dex for any intrinsic metallicity dispersion in the calibrating clusters. The calibrations are

  9. Nature of branching in disordered materials

    NASA Astrophysics Data System (ADS)

    Kulkarni, Amit S.

    reflect different features of the global structure, and it is categorically shown that this dimensional analysis results in effective structure characterization of these materials. Small-angle scattering of x-rays and neutrons can be used to quantify branch content and characterize the structure, through application of concepts native to fractal geometry. The application of the scaling model to nano-particulate aggregates yields quantitative information regarding the structure of these materials. In-situ small and ultra small angle x-ray scattering data collected on fumed silica and soot particles is presented in Chapter II. These measurements were performed at Advanced Photon Source, Argonne National Laboratory, UNICAT beam-line and the European Synchrotron Radiation Facility, Grenoble, France, ID2 beam-line. The dimensional analysis is successful in not only giving an average snap-shot of the nano-particulate aggregates, but also yields information regarding the growth processes involved in the complex pyrolysis technique of synthesizing these materials. In case of macromolecular systems, the minimum path dimension, dmin, is shown to reflect the thermodynamics of the system. This is categorically established in Chapter III on hyperbranched polymers, where the scaling model accurately predicts the good-solvent to theta-condition transition in these highly branched polymers with increasing molar mass. The scaling model is applied to the long standing problem of quantifying long chain branching in polyethylene in Chapter IV. Small angle neutron scattering data on dilute solutions of polyethylene were obtained at the Intense Pulsed Neutron Source (SAND beam-line); NIST center for Neutron Scattering (NG3 beam-line); and Los Alamos Neutron Scattering Center (LQD beam-line). This work, for the first time in literature, reports the length of a long chain branch in polyethylene in terms of the average molar mass of the branches, and the average number of carbon atoms in the long

  10. Irradiation of Metallic Fuels with Rare Earth Additions for Actinide Transmutation in the Advanced Test Reactor. Experiment Description for AFC-2A and AFC-2B

    SciTech Connect

    Hayes, Steven L.

    2006-12-01

    The U.S. Advanced Fuel Cycle Initiative (AFCI), now within the broader context of the Global Nuclear Energy Partnership (GNEP), seeks to develop and demonstrate the technologies needed to transmute the long-lived transuranic actinide isotopes contained in spent nuclear fuel into shorter-lived fission products, thereby dramatically decreasing the volume of material requiring disposal and the long-term radio-toxicity and heat load of high-level waste sent to a geologic repository. One important component of the technology development is actinide-bearing metallic transmutation fuel forms containing plutonium, neptunium, americium (and possibly curium) isotopes. The proposed AFC-2A and AFC-2B irradiation experiments are a continuation of the metallic fuel test series in progress in the ATR. This report documents the experiment description and test matrix of the proposed experiments and the Post Irradiation Examination (PIE) and fabrication schedule.

  11. Metal oxide absorbents for regenerative carbon dioxide and water vapor removal for advanced portable life support systems

    NASA Technical Reports Server (NTRS)

    Hart, Joan M.; Borghese, Joseph B.; Chang, Craig H.; Stonesifer, Greg T.

    1991-01-01

    Recent studies of Allied Signal metal oxide based absorbents demonstrated that these absorbents offer a unique capability to regeneratively remove both metabolic carbon dioxide and water vapor from breathing air; previously, metal oxides were considered only for the removal of CO2. The concurrent removal of CO2 and H2O vapor can simplify the astronaut Portable Life Support System (PLSS) by combining the CO2 and humidity control functions into one regenerative component. The use of metal oxide absorbents for removal of both CO2 ad H2O vapor in the PLSS is the focus of an ongoing program. The full scale Metal Oxide Carbon dioxide and Humidity Remover (MOCHR) and regeneration unit is described.

  12. Modeling branching in cereals.

    PubMed

    Evers, Jochem B; Vos, Jan

    2013-10-10

    Cereals and grasses adapt their structural development to environmental conditions and the resources available. The primary adaptive response is a variable degree of branching, called tillering in cereals. Especially for heterogeneous plant configurations the degree of tillering varies per plant. Functional-structural plant modeling (FSPM) is a modeling approach allowing simulation of the architectural development of individual plants, culminating in the emergent behavior at the canopy level. This paper introduces the principles of modeling tillering in FSPM, using (I) a probability approach, forcing the dynamics of tillering to correspond to measured probabilities. Such models are particularly suitable to evaluate the effect structural variables on system performance. (II) Dose-response curves, representing a measured or assumed response of tillering to an environmental cue. (III) Mechanistic approaches to tillering including control by carbohydrates, hormones, and nutrients. Tiller senescence is equally important for the structural development of cereals as tiller appearance. Little study has been made of tiller senescence, though similar concepts seem to apply as for tiller appearance.

  13. Global and nonglobal parameters of horizontal-branch morphology of globular clusters

    SciTech Connect

    Milone, A. P.; Marino, A. F.; Dotter, A.; Norris, J. E.; Jerjen, H.; Asplund, M. E-mail: amarino@mso.anu.edu.au E-mail: jerjen@mso.anu.edu.au; and others

    2014-04-10

    The horizontal-branch (HB) morphology of globular clusters (GCs) is mainly determined by metallicity. However, the fact that GCs with almost the same metallicity exhibit different HB morphologies demonstrates that at least one more parameter is needed to explain the HB morphology. It has been suggested that one of these should be a global parameter that varies from GC to GC and the other a nonglobal parameter that varies within the GC. In this study we provide empirical evidence corroborating this idea. We used the photometric catalogs obtained with the Advanced Camera for Surveys of the Hubble Space Telescope and analyze the color-magnitude diagrams of 74 GCs. The HB morphology of our sample of GCs has been investigated on the basis of the two new parameters L1 and L2 that measure the distance between the red giant branch and the coolest part of the HB and the color extension of the HB, respectively. We find that L1 correlates with both metallicity and age, whereas L2 most strongly correlates with the mass of the hosting GC. The range of helium abundance among the stars in a GC, characterized by ΔY and associated with the presence of multiple stellar populations, has been estimated in a few GCs to date. In these GCs we find a close relationship among ΔY, GC mass, and L2. We conclude that age and metallicity are the main global parameters, while the range of helium abundance within a GC is the main nonglobal parameter defining the HB morphology of Galactic GCs.

  14. Final Report: DE- FC36-05GO15063, Fundamental Studies of Advanced High-Capacity, Reversible Metal Hydrides

    SciTech Connect

    Jensen, Craig; McGrady, Sean; Severa, Godwin; Eliseo, Jennifer; Chong, Marina

    2013-05-31

    The project was component of the US DOE, Metal Hydride Center of Excellence (MHCoE). The Sandia National Laboratory led center was established to conduct highly collaborative and multi-disciplinary applied R&D to develop new reversible hydrogen storage materials that meet or exceed DOE/FreedomCAR 2010 and 2015 system targets for hydrogen storage materials. Our approach entailed a wide variety of activities ranging from synthesis, characterization, and evaluation of new candidate hydrogen storage materials; screening of catalysts for high capacity materials requiring kinetics enhancement; development of low temperature methods for nano-confinement of hydrides and determining its effects on the kinetics and thermodynamics of hydrides; and development of novel processes for the direct re-hydrogenation of materials. These efforts have resulted in several advancements the development of hydrogen storage materials. We have greatly extended the fundamental knowledge about the highly promising hydrogen storage carrier, alane (AlH3), by carrying out the first crystal structure determinations and the first determination of the heats of dehydrogenation of β–AlH3 and γ-AlD3. A low-temperature homogenous organometallic approach to incorporation of Al and Mg based hydrides into carbon aerogels has been developed that that allows high loadings without degradation of the nano-porous scaffold. Nano-confinement was found to significantly improve the dehydrogenation kinetics but not effect the enthalpy of dehydrogenation. We conceived, characterized, and synthesized a novel class of potential hydrogen storage materials, bimetallic borohydrides. These novel compounds were found to have many favorable properties including release of significant amounts of hydrogen at moderate temperatures (75-190 º C). However, in situ IR studies in tandem with thermal gravimetric analysis have shown that about 0.5 equivalents of diborane are released during the

  15. A Branch Meeting in Avon

    ERIC Educational Resources Information Center

    Vaughan, Kathryn; Coles, Alf

    2011-01-01

    The Association of Teachers of Mathematics (ATM) exists for, and is run by, its members. Branch meetings are so much more than the "grass roots" of the association--it can be a powerhouse of inspiration and creativity. In this article, the authors provide commentaries on a recent branch meeting.

  16. Collaborative Research Program on Advanced Metals and Ceramics for Armor and Anti-Armor Applications Dynamic Behavior of Non-Crystalline and Crystalline Metallic Systems

    DTIC Science & Technology

    2006-09-01

    Ramesh, K. T. A Novel Technique for Accurate Measurement of Material Properties in the Tension Kolsky Bar. International Journal of Impact Engineering...Selected Accomplishments A novel technique for producing in situ metallic glass-matrix composites (MGMCs) was developed, which was patented with both JHU...and ARL investigators as co-inventors. Using this technique , we produced a series of MGMCs with dramatically enhanced plastic strain to failure in

  17. New branch of solid-state physics

    NASA Astrophysics Data System (ADS)

    Panin, V. Ye.

    1987-10-01

    Research in solid-state physics branched out in a new direction, concerning highly excited states in crystals, upon publication of the article, Atom Vacancy States in Crystals. Perturbation theory and translational symmetry not being applicable here, new concepts had to be developed. Any distortion of the crystal structure must be treated not simply as a defect but as an allowed state genetically latent within the electron energy spectrum of a crystal. Five articles on the subject have been published: Highly Excited States in Crystals; Spectrum of Excited States and Vortical Mechanical Field in Deformed Crystal; Modification of Properties of Metals by High Power Ion Beams; Anomalous Hall Effect in Disordered Ferromagnetic Alloys of Transition Metals; and Restructurization of Atomic Condensed State Under Strong External Influencing Action. These articles are briefly discussed.

  18. A positive approach to branching.

    PubMed

    Janssen, Bart J; Drummond, Revel S M; Ledger, Susan E; Snowden, Kimberley C

    2010-04-01

    Plants regulate the development of branches in response to environmental and developmental signals in order to maximize reproductive success. A number of hormone signals are involved in the regulation of branching and both their production and transmission affect axillary meristem outgrowth. With the identification of strigolactones as root-derived branch inhibitors it seems likely that a biochemical pathway starting from a carotenoid and resulting in production of a strigolactone hormone is present in most plants. Our observation that loss of CCD7 or CCD8 also results in production of a promoter of branching from roots shows the branching pathway has multiple levels of control which allows a high degree of sensitivity to subtle differences in environmental and developmental signals.

  19. Recent advances in tailoring the aggregation of heavier alkaline earth metal halides, alkoxides and aryloxides from non-aqueous solvents.

    PubMed

    Fromm, Katharina M

    2006-11-21

    This overview on one of the subjects treated in our group deals with the synthesis and study of low-dimensional polymer and molecular solid state structures formed with alkaline earth metal ions in non-aqueous solvents. We have chosen several synthetic approaches in order to obtain such compounds. The first concept deals with the "cutting out" of structural fragments from a solid state structure of a binary compound, which will be explained with reference to BaI2. Depending on the size and concentration of oxygen donor ligands, used as chemical scissors on BaI2, three-, two-, one- and zero-dimensional derived adducts of BaI2 are obtained, comparable to a structural genealogy tree for BaI2. A second part deals with the supramolecular approach for the synthesis of low dimensional polymeric compounds based on alkaline earth metal iodides, obtained by the combination of metal ion coordination with hydrogen bonding between the cationic complexes and their anions. Certain circumstances allow rules to be established for the prediction of the dimensionality of a given compound, contributing to the fundamental problem of structure prediction in crystal engineering. A third section describes a synthetic approach for generating pure alkaline earth metal cage compounds as well as alkali and alkaline earth mixed metal clusters. A first step deals with different molecular solvated alkaline earth metal iodides which are investigated as a function of the ligand size in non-aqueous solvents. These are then reacted with some alkali metal compound in order to partially or totally eliminate alkali iodide and to form the targeted clusters. These unique structures of ligand stabilized metal halide, hydroxide and/or alkoxide and aryloxide aggregates are of interest as potential precursors for oxide materials and as catalysts. Approaches to two synthetic methods of the latter, sol-gel and (MO)CVD (metal-organic chemical vapour deposition), are investigated with some of our compounds. (D

  20. Eight prehilar branches of the right renal artery

    PubMed Central

    Shetty, Surekha D.; Ravindra, Swamy; Sirasanagandla, Srinivasa Rao; Aithal, Ashwini P.; Patil, Jyothsna; Kumar, Naveen

    2014-01-01

    Imaging technology with its advancement in the field of urology is the boon for the patients who require minimally invasive approaches for various kidney disorders. These approaches require a precise knowledge of the normal and variant anatomy of vessels at the hilum of the kidney. During routine dissections, a variation in the branching pattern of the right renal artery was noted in an adult male cadaver. The right renal artery divided into upper and lower divisions 6cm away from the hilum of the kidney. The upper division gave 4 branches, and the lower division gave two branches. These two branches further bifurcated and gave 2 branches each. Thus, there were 8 prehilar branches of renal artery. The multiple prehilar branches led to a congested atmosphere at the hilum of the kidney. This arterial congestion might result in hindering the blood flow at the renal hilum. Apart from this, it might cause difficulties in diagnostic and therapeutic invasive procedures. Knowledge of this variation is of importance to radiologists and urologists in particular. PMID:25276483

  1. Branching Out in Roots: Uncovering Form, Function, and Regulation1

    PubMed Central

    Atkinson, Jonathan A.; Rasmussen, Amanda; Traini, Richard; Voß, Ute; Sturrock, Craig; Mooney, Sacha J.; Wells, Darren M.; Bennett, Malcolm J.

    2014-01-01

    Root branching is critical for plants to secure anchorage and ensure the supply of water, minerals, and nutrients. To date, research on root branching has focused on lateral root development in young seedlings. However, many other programs of postembryonic root organogenesis exist in angiosperms. In cereal crops, the majority of the mature root system is composed of several classes of adventitious roots that include crown roots and brace roots. In this Update, we initially describe the diversity of postembryonic root forms. Next, we review recent advances in our understanding of the genes, signals, and mechanisms regulating lateral root and adventitious root branching in the plant models Arabidopsis (Arabidopsis thaliana), maize (Zea mays), and rice (Oryza sativa). While many common signals, regulatory components, and mechanisms have been identified that control the initiation, morphogenesis, and emergence of new lateral and adventitious root organs, much more remains to be done. We conclude by discussing the challenges and opportunities facing root branching research. PMID:25136060

  2. Use of the high-energy x-ray microprobe at the Advanced Photon Source to investigate the interactions between metals and bacteria.

    SciTech Connect

    Kemner, K. M.; Lai, B.; Maser, J.; Schneegurt, M. A.; Cai, Z.; Ilinski, P. P.; Kulpa, C. F.; Legnini, D. G.; Nealson, K. H.; Pratt, S. T.; Rodrigues, W.; Tischler, M. L.; Yun, W.

    1999-09-30

    Understanding the fate of heavy-metal contaminants in the environment is of fundamental importance in the development and evaluation of effective remediation and sequestration strategies. Among the factors influencing the transport of these contaminants are their chemical separation and the chemical and physical attributes of the surrounding medium. Bacteria and the extracellular material associated with them are thought to play a key role in determining a contaminant's speciation and thus its mobility in the environment. In addition, the microenvironment at and adjacent to actively metabolizing cell surfaces can be significantly different from the bulk environment. Thus, the spatial distribution and chemical separation of contaminants and elements that are key to biological processes must be characterized at micron and submicron resolution in order to understand the microscopic physical, geological, chemical, and biological interfaces that determine a contaminant's macroscopic fate. Hard X-ray microimaging is a powerful technique for the element-specific investigation of complex environmental samples at th needed micron and submicron resolution. An important advantage of this technique results from the large penetration depth of hard X-rays in water. This advantage minimizes the requirements for sample preparation and allows the detailed study of hydrated samples. This paper presents results of studies of the spatial distribution of naturally occurring metals and a heavy-metal contaminant (Cr) in and near hydrated bacteria (Pseudomonas fluorescens) in the early stages of biofilm development, performed at the Advanced Photon Source Sector 2 X-ray microscopy beamline.

  3. THE ACS SURVEY OF GALACTIC GLOBULAR CLUSTERS. IX. HORIZONTAL BRANCH MORPHOLOGY AND THE SECOND PARAMETER PHENOMENON

    SciTech Connect

    Dotter, Aaron; Sarajedini, Ata; Anderson, Jay; Bedin, Luigi R.; Paust, Nathaniel; Reid, I. Neill; Aparicio, Antonio; MarIn-Franch, A.; Rosenberg, Alfred; Majewski, Steven; Milone, Antonino; Piotto, Giampaolo; Siegel, Michael E-mail: ata@astro.ufl.ed

    2010-01-01

    The horizontal branch (HB) morphology of globular clusters (GCs) is most strongly influenced by metallicity. The second parameter phenomenon, first described in the 1960s, acknowledges that metallicity alone is not enough to describe the HB morphology of all GCs. In particular, astronomers noticed that the outer Galactic halo contains GCs with redder HBs at a given metallicity than are found inside the solar circle. Thus, at least a second parameter was required to characterize HB morphology. While the term 'second parameter' has since come to be used in a broader context, its identity with respect to the original problem has not been conclusively determined. Here we analyze the median color difference between the HB and the red giant branch, hereafter denoted as DELTA(V - I), measured from Hubble Space Telescope (HST) Advanced Camera for Surveys (ACS) photometry of 60 GCs within approx20 kpc of the Galactic center. Analysis of this homogeneous data set reveals that, after the influence of metallicity has been removed from the data, the correlation between DELTA(V - I) and age is stronger than that of any other parameter considered. Expanding the sample to include HST ACS and Wide Field Planetary Camera 2 photometry of the six most distant Galactic GCs lends additional support to the correlation between DELTA(V - I) and age. This result is robust with respect to the adopted metallicity scale and the method of age determination, but must bear the caveat that high-quality, detailed abundance information is not available for a significant fraction of the sample. Furthermore, when a subset of GCs with similar metallicities and ages is considered, a correlation between DELTA(V - I) and central luminosity density is exposed. With respect to the existence of GCs with anomalously red HBs at a given metallicity, we conclude that age is the second parameter and central density is most likely the third. Important problems related to HB morphology in GCs, notably multi

  4. Novel High-Performance Analog Devices for Advanced Low-Power High-k Metal Gate Complementary Metal-Oxide-Semiconductor Technology

    NASA Astrophysics Data System (ADS)

    Han, Jin-Ping; Shimizu, Takashi; Pan, Li-Hong; Voelker, Moritz; Bernicot, Christophe; Arnaud, Franck; Mocuta, Anda; Stahrenberg, Knut; Azuma, Atsushi; Eller, Manfred; Yang, Guoyong; Jaeger, Daniel; Zhuang, Haoren; Miyashita, Katsura; Stein, Kenneth; Nair, Deleep; Hoo Park, Jae; Kohler, Sabrina; Hamaguchi, Masafumi; Li, Weipeng; Kim, Kisang; Chanemougame, Daniel; Kim, Nam Sung; Uchimura, Sadaharu; Tsutsui, Gen; Wiedholz, Christian; Miyake, Shinich; van Meer, Hans; Liang, Jewel; Ostermayr, Martin; Lian, Jenny; Celik, Muhsin; Donaton, Ricardo; Barla, Kathy; Na, MyungHee; Goto, Yoshiro; Sherony, Melanie; Johnson, Frank S.; Wachnik, Richard; Sudijono, John; Kaste, Ed; Sampson, Ron; Ku, Ja-Hum; Steegen, An; Neumueller, Walter

    2011-04-01

    High performance analog (HPA) devices in high-k metal gate (HKMG) scheme with innovative halo engineering have been successfully demonstrated to produce superior analog and digital performance for low power applications. HPA device was processed “freely” with no extra mask, no extra litho, and no extra process step. This paper details a comprehensive study of the analog and digital characteristics of these HPA devices in comparison with analog control (conventional digital devices with matched geometry). Analog properties such as output voltage gain (also called self-gain), trans-conductance Gm, conductance Gds, Gm/Id, mismatching (MM) behavior, flicker noise (1/f noise) and current linearity have clearly reflected the advantage of HPA devices over analog control, while DC performance (e.g., Ion-Ioff, Ioff-Vtsat, DIBL, Cjswg) and reliability (HCI) have also shown the comparability of HPA devices over control.

  5. Standard Giant Branches in the Washington Photometric System

    NASA Technical Reports Server (NTRS)

    Geisler, Doug; Sarajedini, Ata

    1998-01-01

    We have obtained CCD photometry in the Washington system C, T(sub 1) filters for some 850,000 objects associated with 10 Galactic globular clusters and 2 old open clusters. These clusters have well-known metal abundances, spanning a metallicity range of 2.5 dex from [Fe/H] approx -2.25 to +0.25 at a spacing of approx. 0.2 dex. Two independent observations were obtained for each cluster and internal checks, as well as external comparisons with existing photoelectric photometry, indicate that the final colors and magnitudes have overall uncertainties of 0.03 mag. Analogous to the method employed by Da Costa and Armandroff for V, I photometry , we then proceed to construct standard ((M(sub T),(C - T(sub 1))(sub 0)) giant branches for these clusters adopting the Lee et distance scale, using some 350 stars per globular cluster to define the giant branch. We then determine the metallicity sensitivity of the ((C - T(sub 1))(sub 0) color at a given M((sub T)(sub 1)) value. The Washington system technique is found to have three times the metallicity sensitivity of the V, I technique. At M((sub T)(sub 1)) = -2 (about a magnitude below the tip of the giant branch, roughly equivalent to M(sub I) = -3), the giant branches of 47 Tuc and M15 are separated by 1.16 magnitudes in (V - l)(sub 0) and only 0.38 magnitudes in (V - I)(sub 0). Thus, for a given photometric accuracy, metallicities can be determined three times more precisely with the Washington technique. We find a linear relationship between (C - T(sub l)(sub 0) (at M(sub T)(sub 1) = -2) and metallicity exists over the full metallicity range, with an rms of only 0.04 dex. We also derive metallicity calibrations for M(sub T)(sub 1) = -2.5 and -1.5, as well as for two other metallicity scales. The Washington technique retains almost the same metallicity sensitivity at faint magnitudes , and indeed the standard giant branches are still well separated even below the horizontal branch. The photometry is used to set upper

  6. Fault branching and rupture directivity

    NASA Astrophysics Data System (ADS)

    Fliss, Sonia; Bhat, Harsha S.; Dmowska, Renata; Rice, James R.

    2005-06-01

    Could the directivity of a complex earthquake be inferred from the ruptured fault branches it created? Typically, branches develop in forward orientation, making acute angles relative to the propagation direction. Direct backward branching of the same style as the main rupture (e.g., both right lateral) is disallowed by the stress field at the rupture front. Here we propose another mechanism of backward branching. In that mechanism, rupture stops along one fault strand, radiates stress to a neighboring strand, nucleates there, and develops bilaterally, generating a backward branch. Such makes diagnosing directivity of a past earthquake difficult without detailed knowledge of the branching process. As a field example, in the Landers 1992 earthquake, rupture stopped at the northern end of the Kickapoo fault, jumped onto the Homestead Valley fault, and developed bilaterally there, NNW to continue the main rupture but also SSE for 4 km forming a backward branch. We develop theoretical principles underlying such rupture transitions, partly from elastostatic stress analysis, and then simulate the Landers example numerically using a two-dimensional elastodynamic boundary integral equation formulation incorporating slip-weakening rupture. This reproduces the proposed backward branching mechanism based on realistic if simplified fault geometries, prestress orientation corresponding to the region, standard lab friction values for peak strength, and fracture energies characteristic of the Landers event. We also show that the seismic S ratio controls the jumpable distance and that curving of a fault toward its compressional side, like locally along the southeastern Homestead Valley fault, induces near-tip increase of compressive normal stress that slows rupture propagation.

  7. Novel side branch ostial stent.

    PubMed

    Chen, Shao-Liang; Lv, Shu-Zheng; Kwan, Tak W

    2009-04-01

    Bifurcation lesions are technically challenging and plagued by a high incidence of restenosis, especially at the side branch orifice, which results in a more frequent need for revascularization during the follow-up period. This report discusses two clinical experiences with a novel side branch ostial stent, the BIGUARD stent, designed for the treatment of bifurcation lesions; procedural success with no in-hospital complications was observed in types IVb and Ia lesions.

  8. Mechanisms of C-C bond formation and cleavage on metal surfaces: Formation of butenes and hexenes from linear and branched pentenes over Ru/SiO sub 2 catalysts

    SciTech Connect

    Rodriguez, E.; Leconte, M.; Basset, J. )

    1991-12-01

    Over Ru/SiO{sub 2} catalyst, at temperatures above 100-150C and in the presence of hydrogen, linear and branched pentenes (1-pentene, cis- and trans-2-pentene, 2-methyl-2-butene, 3-methyl-1-butene, and 2-methyl-1-butene) undergo isomerization, hydrogenation, hydrogenolysis, and homologation. The main primary products of these last two reactions of C-C bond cleavage and formation are methane, butenes, and hexanes. At low temperature (100-150C), the formation of methane is reduced and the major products are C{sub 4} and C{sub 6} olefinic hydrocarbons, which are obtained in roughly comparable amounts. The distribution of the butenes isomers and of the hexenes isomers strongly depends on the structure of the starting pentene (linear or branched, terminal or internal). The results confirm that hydrogenolysis and homologation of a C{sub 5} olefinic hydrocarbon occur at comparable rates and involve: (1) cleavage of mainly a terminal C-C bond of the pentene isomer leading to C{sup 4} and C{sup 1} fragments, (2) reaction of this C{sup 1} fragment with the starting C{sup 5} to give C{sup 6} hydrocarbons, and (or) (3) hydrogenation of the C{sup 1} fragment to methane. Two mechanisms, based on concepts of organometallic chemistry, can account for the results (especially for the distribution of the C{sup 4} and C{sup 6} olefinic isomers): (1) a methylene insertion-deinsertion mechanism or (2) a mechanism that involves formation and decomposition of dimetallacyclic intermediates. Several experimental results seem to be in favor of the last proposed mechanism.

  9. Naval Surface Warfare Center Electrochemistry Branch

    DTIC Science & Technology

    1985-02-16

    MANUFACTURING 9 CORROSION PROTECTION _ v~~~~~~~~~~~~~~~~~~~~ LITHIUM BATTERY SAFEy 3 Batteries -Complex Electrochemical Systems A battery is a device for...submarines, etc.) in both the primary and the secondary versions. Reserve Lithium Thionyl Chloride Battery Prototype for Advanced Mine Versatile...be based primarily on the use of lithium as the anode material In elec- trochemical systems, this metal, which is the lightest metal known, exhibits

  10. Structural Mechanics and Dynamics Branch

    NASA Technical Reports Server (NTRS)

    Stefko, George

    2003-01-01

    The 2002 annual report of the Structural Mechanics and Dynamics Branch reflects the majority of the work performed by the branch staff during the 2002 calendar year. Its purpose is to give a brief review of the branch s technical accomplishments. The Structural Mechanics and Dynamics Branch develops innovative computational tools, benchmark experimental data, and solutions to long-term barrier problems in the areas of propulsion aeroelasticity, active and passive damping, engine vibration control, rotor dynamics, magnetic suspension, structural mechanics, probabilistics, smart structures, engine system dynamics, and engine containment. Furthermore, the branch is developing a compact, nonpolluting, bearingless electric machine with electric power supplied by fuel cells for future "more electric" aircraft. An ultra-high-power-density machine that can generate projected power densities of 50 hp/lb or more, in comparison to conventional electric machines, which generate usually 0.2 hp/lb, is under development for application to electric drives for propulsive fans or propellers. In the future, propulsion and power systems will need to be lighter, to operate at higher temperatures, and to be more reliable in order to achieve higher performance and economic viability. The Structural Mechanics and Dynamics Branch is working to achieve these complex, challenging goals.

  11. Advances in Joining Techniques Used in Development of SPF/DB Titanium Sandwich Reinforced with Metal Matrices

    NASA Technical Reports Server (NTRS)

    Fischler, J. E.

    1985-01-01

    Three and four-sheet expanded titanium sandwich sheets have been developed at Douglas Aircraft Company, a division of McDonnell Douglas Corporation, under contract to NASA Langley Research Center. In these contracts, spot welding and roll seam welding are used to join the core sheets. These core sheets are expanded to the face sheets and diffusion bonded to form various type cells. The advantages of various cell shapes and the design parameters for optimizing the wing and fuselage concepts are discussed versus the complexity of the spot weld pattern. In addition, metal matrix composites of fibers in an aluminum matrix encapsulated in a titanium sheath are aluminum brazed successfully to the titanium sandwich face sheets. The strength and crack growth rate of the superplastic-formed/diffusion bonded (SPF/DB) titanium sandwich with and without the metal matrix composites are described.

  12. Liquid-metal-cooled, curved-crystal monochromator for Advanced Photon Source bending-magnet beamline 1-BM

    SciTech Connect

    Brauer, S.; Rodricks, B.; Assoufid, L.; Beno, M.A.; Knapp, G.S.

    1996-06-01

    The authors describe a horizontally focusing curved-crystal monochromator that invokes a 4-point bending scheme and a liquid-metal cooling bath. The device has been designed for dispersive diffraction and spectroscopy in the 5--20 keV range, with a predicted focal spot size of {le} 100 {micro}m. To minimize thermal distortions and thermal equilibration time, the 355 x 32 x 0.8 mm crystal will be nearly half submerged in a bath of Ga-In-Sn-Zn alloy. The liquid metal thermally couples the crystal to the water-cooled Cu frame, while permitting the required crystal bending. Calculated thermal profiles and anticipated focusing properties are discussed.

  13. Lithium salts for advanced lithium batteries: Li-metal, Li-O2, and Li-S

    DOE PAGES

    Younesi, Reza; Veith, Gabriel M.; Johansson, Patrik; ...

    2015-06-01

    Presently lithium hexafluorophosphate (LiPF6) is the dominant Li-salt used in commercial rechargeable lithium-ion batteries (LIBs) based on a graphite anode and a 3-4 V cathode material. While LiPF6 is not the ideal Li-salt for every important electrolyte property, it has a uniquely suitable combination of properties (temperature range, passivation, conductivity, etc.) rendering it the overall best Li-salt for LIBs. However, this may not necessarily be true for other types of Li-based batteries. Indeed, next generation batteries, for example lithium-metal (Li-metal), lithium-oxygen (Li-O2), and lithium sulphur (Li-S), require a re-evaluation of Li-salts due to the different electrochemical and chemical reactions andmore » conditions within such cells. Furthermore, this review explores the critical role Li-salts play in ensuring in these batteries viability.« less

  14. Lithium salts for advanced lithium batteries: Li-metal, Li-O2, and Li-S

    SciTech Connect

    Younesi, Reza; Veith, Gabriel M.; Johansson, Patrik; Edstrom, Kristina; Vegge, Tejs

    2015-06-01

    Presently lithium hexafluorophosphate (LiPF6) is the dominant Li-salt used in commercial rechargeable lithium-ion batteries (LIBs) based on a graphite anode and a 3-4 V cathode material. While LiPF6 is not the ideal Li-salt for every important electrolyte property, it has a uniquely suitable combination of properties (temperature range, passivation, conductivity, etc.) rendering it the overall best Li-salt for LIBs. However, this may not necessarily be true for other types of Li-based batteries. Indeed, next generation batteries, for example lithium-metal (Li-metal), lithium-oxygen (Li-O2), and lithium sulphur (Li-S), require a re-evaluation of Li-salts due to the different electrochemical and chemical reactions and conditions within such cells. Furthermore, this review explores the critical role Li-salts play in ensuring in these batteries viability.

  15. Development of Metal-impregnated Single Walled Carbon Nanotubes for Toxic Gas Contaminant Control in Advanced Life Support Systems

    NASA Technical Reports Server (NTRS)

    Cinke, Martin; Li, Jing; Chen, Bin; Wignarajah, Kanapathipillai; Pisharody, Suresh A.; Fisher, John W.; Delzeit, Lance; Meyyappan, Meyya; Partridge, Harry; Clark, Kimberlee

    2003-01-01

    The success of physico-chemical waste processing and resource recovery technologies for life support application depends partly on the ability of gas clean-up systems to efficiently remove trace contaminants generated during the process with minimal use of expendables. Highly purified metal-impregnated carbon nanotubes promise superior performance over conventional approaches to gas clean-up due to their ability to direct the selective uptake gaseous species based both on the nanotube s controlled pore size, high surface area, and ordered chemical structure that allows functionalization and on the nanotube s effectiveness as a catalyst support material for toxic contaminants removal. We present results on the purification of single walled carbon nanotubes (SWCNT) and efforts at metal impregnation of the SWCNT's.

  16. Recovery of Rare Earths, Precious Metals and Other Critical Materials from Geothermal Waters with Advanced Sorbent Structures

    DOE Data Explorer

    Pamela M. Kinsey

    2015-09-30

    The work evaluates, develops and demonstrates flexible, scalable mineral extraction technology for geothermal brines based upon solid phase sorbent materials with a specific focus upon rare earth elements (REEs). The selected organic and inorganic sorbent materials demonstrated high performance for collection of trace REEs, precious and valuable metals. The nanostructured materials typically performed better than commercially available sorbents. Data contains organic and inorganic sorbent removal efficiency, Sharkey Hot Springs (Idaho) water chemsitry analysis, and rare earth removal efficiency from select sorbents.

  17. A Mesoporous Indium Metal-Organic Framework: Remarkable Advances in Catalytic Activity for Strecker Reaction of Ketones.

    PubMed

    Reinares-Fisac, Daniel; Aguirre-Díaz, Lina María; Iglesias, Marta; Snejko, Natalia; Gutiérrez-Puebla, Enrique; Monge, M Ángeles; Gándara, Felipe

    2016-07-27

    With the aim of developing new highly porous, heterogeneous Lewis acid catalysts for multicomponent reactions, a new mesoporous metal-organic framework, InPF-110 ([In3O(btb)2(HCOO)(L)], (H3btb = 1,3,5-tris(4-carboxyphenyl)benzene acid, L = methanol, water, or ethanol), has been prepared with indium as the metal center. It exhibits a Langmuir surface area of 1470 m(2) g(-1), and its structure consists of hexagonal pores with a 2.8 nm aperture, which allows the diffusion of multiple substrates. This material presents a large density of active metal sites resulting in outstanding catalytic activity in the formation of substituted α-aminonitriles through the one-pot Strecker reaction of ketones. In this respect, InPF-110 stands out compared to other catalysts for this reaction due to the small catalyst loadings required, and without the need for heat or solvents. Furthermore, X-ray single crystal diffraction studies clearly show the framework-substrate interaction through coordination to the accessible indium sites.

  18. Quantitative macroinvertebrate survey of Pen Branch and Indian Grave Branch

    SciTech Connect

    Not Available

    1989-02-01

    A total of 80 species were collected at all sites on Pen Branch and Indian Grave Branch during the 28 day period for colonization of the multiplate artificial substrate samplers. The two upstream sites demonstrated the highest species richness. During the sampling interval a release of significant proportion entered Indian Grave Branch, affecting all downstream sites. This effect was most severe at sites 3, 4, and 7, apparently resulting in heavy scouring of the multiplate samplers. Nevertheless, much colonization did occur at sites 3 and 4, with hydropsychid caddisflies, blackflies and midges predominant. At sites 5 and 6 a greater degree of recovery was noted, due to the lessened scouring in the broad floodplain. These downstream sites had significant numbers of mayflies along with the numerous midges. Considered overall, colonization during the period since the K Reactor has ceased releasing thermal effluent into Pen Branch and Indian Grave Branch has been substantial, introducing a substantial proportion of the species known from other nearby streams. 29 tabs.

  19. Comparison of metal oxide absorbents for regenerative carbon dioxide and water vapor removal for advanced portable life support systems

    NASA Technical Reports Server (NTRS)

    Stonesifer, Greg T.; Chang, Craig H.; Cusick, Robert J.; Hart, Joan M.

    1991-01-01

    Metal-oxide absorbents (MOAs) have a demonstrated capability for removal of both metabolic CO2 and H2O from breathing atmospheres, simplifying portable life support system (PLSS) design and affording reversible operation for regeneration. Attention is presently given to the comparative performance levels obtained by silver-oxide-based and silver/zinc-oxide-based systems, which also proved to be longer-lasting than the silver oxide-absorber system. The silver/zinc system is found to substantially simplify the ventilation loop of a prospective Space Station Freedom PLSS.

  20. Treatment of metal-laden hazardous wastes with advanced clean coal technology by-products. Quartery report, August 1994--November 1994

    SciTech Connect

    1994-12-01

    This first quarterly report describes work during the first three months of the University of Pittsburgh`s (Pitt`s) project on the {open_quotes}Treatment of Metal-Laden Hazardous Wastes with Advanced Clean Coal Technology By-Products.{close_quotes} Participating with Pitt on this project are Dravo Lime Company (DLC), Mill Service, Inc. (MSO and the Center for Hazardous Materials Research (CHMR)). The report states the goals of the project - both general and specific - and then describes the activities of the project team during the reporting period. All of this work has been organizational and developmental in nature. No data has yet been collected. Technical details and data will appear for the first time in the second quarterly report and be the major topic of subsequent reports.

  1. Advanced cathode materials for polymer electrolyte fuel cells based on pt/ metal oxides: from model electrodes to catalyst systems.

    PubMed

    Fabbri, Emiliana; Pătru, Alexandra; Rabis, Annett; Kötz, Rüdiger; Schmidt, Thomas J

    2014-01-01

    The development of stable catalyst systems for application at the cathode side of polymer electrolyte fuel cells (PEFCs) requires the substitution of the state-of-the-art carbon supports with materials showing high corrosion resistance in a strongly oxidizing environment. Metal oxides in their highest oxidation state can represent viable support materials for the next generation PEFC cathodes. In the present work a multilevel approach has been adopted to investigate the kinetics and the activity of Pt nanoparticles supported on SnO2-based metal oxides. Particularly, model electrodes made of SnO2 thin films supporting Pt nanoparticles, and porous catalyst systems made of Pt nanoparticles supported on Sb-doped SnO2 high surface area powders have been investigated. The present results indicate that SnO2-based supports do not modify the oxygen reduction reaction mechanism on the Pt nanoparticle surface, but rather lead to catalysts with enhanced specific activity compared to Pt/carbon systems. Different reasons for the enhancement in the specific activity are considered and discussed.

  2. Etch Challenges Brought by the Metal Hardmask Approach for Advanced Contact Patterning with Fluorocarbon-based Plasma

    NASA Astrophysics Data System (ADS)

    de Marneffe, Jean-Francois; Goossens, Danny; Shamiryan, Denis; Struyf, Herbert; Boullart, Werner

    2008-10-01

    In order to overcome patterning challenges brought by dimensional scaling and aggressive pitches, extreme ultra-violet (EUV) lithography has been recently pushed forward as a possible solution for IC manufacturing, allowing extended exposure latitude at sub-50nm dimensions. This work address the technological solutions used for contact holes patterning by means of EUV lithography. A metal hard-mask (MHM) approach has been selected, in order to combine the etching of high-aspect ratio features with thin EUV photoresist. The pre-metal dielectric stack covering the active fins was composed of 15nm Si3N4 as an etch-stop liner, covered by 240nm SiO2. The MHM was made of a 30nm TiN film on top of which was spun 20nm of organic underlayer and 100nm of EUV photoresist. This presentation will describe in details the various plasma processing issues and challenges met with this patterning strategy, for down to ˜50nm contact hole sizes: SiO2:TiN and SiO2:Si3N4 selectivities by means of fluorocarbon-based chemistries; loading effects; profile and mask undercut control with CCP plasma; residue cleaning.

  3. Large branched self-assembled DNA complexes

    NASA Astrophysics Data System (ADS)

    Tosch, Paul; Wälti, Christoph; Middelberg, Anton P. J.; Davies, A. Giles

    2007-04-01

    Many biological molecules have been demonstrated to self-assemble into complex structures and networks by using their very efficient and selective molecular recognition processes. The use of biological molecules as scaffolds for the construction of functional devices by self-assembling nanoscale complexes onto the scaffolds has recently attracted significant attention and many different applications in this field have emerged. In particular DNA, owing to its inherent sophisticated self-organization and molecular recognition properties, has served widely as a scaffold for various nanotechnological self-assembly applications, with metallic and semiconducting nanoparticles, proteins, macromolecular complexes, inter alia, being assembled onto designed DNA scaffolds. Such scaffolds may typically contain multiple branch-points and comprise a number of DNA molecules selfassembled into the desired configuration. Previously, several studies have used synthetic methods to produce the constituent DNA of the scaffolds, but this typically constrains the size of the complexes. For applications that require larger self-assembling DNA complexes, several tens of nanometers or more, other techniques need to be employed. In this article, we discuss a generic technique to generate large branched DNA macromolecular complexes.

  4. Fault Branching and Rupture Directivity

    NASA Astrophysics Data System (ADS)

    Dmowska, R.; Rice, J. R.; Kame, N.

    2002-12-01

    Can the rupture directivity of past earthquakes be inferred from fault geometry? Nakata et al. [J. Geogr., 1998] propose to relate the observed surface branching of fault systems with directivity. Their work assumes that all branches are through acute angles in the direction of rupture propagation. However, in some observed cases rupture paths seem to branch through highly obtuse angles, as if to propagate ``backwards". Field examples of that are as follows: (1) Landers 1992. When crossing from the Johnson Valley to the Homestead Valley (HV) fault via the Kickapoo (Kp) fault, the rupture from Kp progressed not just forward onto the northern stretch of the HV fault, but also backwards, i.e., SSE along the HV [Sowers et al., 1994, Spotila and Sieh, 1995, Zachariasen and Sieh, 1995, Rockwell et al., 2000]. Measurements of surface slip along that backward branch, a prominent feature of 4 km length, show right-lateral slip, decreasing towards the SSE. (2) At a similar crossing from the HV to the Emerson (Em) fault, the rupture progressed backwards along different SSE splays of the Em fault [Zachariasen and Sieh, 1995]. (3). In crossing from the Em to Camp Rock (CR) fault, again, rupture went SSE on the CR fault. (4). Hector Mine 1999. The rupture originated on a buried fault without surface trace [Li et al., 2002; Hauksson et al., 2002] and progressed bilaterally south and north. In the south it met the Lavic Lake (LL) fault and progressed south on it, but also progressed backward, i.e. NNW, along the northern stretch of the LL fault. The angle between the buried fault and the northern LL fault is around -160o, and that NNW stretch extends around 15 km. The field examples with highly obtuse branch angles suggest that there may be no simple correlation between fault geometry and rupture directivity. We propose that an important distinction is whether those obtuse branches actually involved a rupture path which directly turned through the obtuse angle (while continuing

  5. Report on Development of Concepts for the Advanced Casting System in Support of the Deployment of a Remotely Operable Research Scale Fuel Fabrication Facility for Metal Fuel

    SciTech Connect

    Ken Marsden

    2007-03-01

    Demonstration of recycle processes with low transuranic losses is key to the successful implementation of the Global Nuclear Energy Partnership strategy to manage spent fuel. It is probable that these recycle processes will include remote fuel fabrication. This report outlines the strategy to develop and implement a remote metal fuel casting process with minimal transuranic losses. The approach includes a bench-scale casting system to develop materials, methods, and perform tests with transuranics, and an engineering-scale casting system to demonstrate scalability and remote operability. These systems will be built as flexible test beds allowing exploration of multiple fuel casting approaches. The final component of the remote fuel fabrication demonstration culminates in the installation of an advanced casting system in a hot cell to provide integrated remote operation experience with low transuranic loss. Design efforts and technology planning have begun for the bench-scale casting system, and this will become operational in fiscal year 2008, assuming appropriate funding. Installation of the engineering-scale system will follow in late fiscal year 2008, and utilize materials and process knowledge gained in the bench-scale system. Assuming appropriate funding, the advanced casting system will be installed in a remote hot cell at the end of fiscal year 2009.

  6. 30 CFR 57.6403 - Branch circuits.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Branch circuits. 57.6403 Section 57.6403... Blasting-Surface and Underground § 57.6403 Branch circuits. (a) If electric blasting includes the use of branch circuits, each branch shall be equipped with a safety switch or equivalent method to isolate...

  7. 30 CFR 56.6403 - Branch circuits.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Branch circuits. 56.6403 Section 56.6403... Blasting § 56.6403 Branch circuits. (a) If electric blasting includes the use of branch circuits, each branch shall be equipped with a safety switch or equivalent method to isolate the circuits to be used....

  8. 17 CFR 166.4 - Branch offices.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Branch offices. 166.4 Section... RULES § 166.4 Branch offices. Each branch office of each Commission registrant must use the name of the.... The act, omission or failure of any person acting for the branch office, within the scope of...

  9. Double-branched vortex generator

    NASA Technical Reports Server (NTRS)

    Cantwell, E. R.; Westphal, R. V.; Mehta, R. D.

    1985-01-01

    In order to assess the suitability of using a double branched vortex generator in parametric studies involving vortex interactions, an experimental study of the main vortex and secondary flows produced by a double branched vortex generator was conducted in a 20-by-40 cm indraft wind tunnel. Measurements of the cross flow velocities were made with a five hole pressure probe from which vorticity contours and vortex parameters were derived. The results showed that the optimum configuration consisted of chord extensions with the absence of a centerbody.

  10. Development of Metal-impregnated Single Walled Carbon Nanotubes for Toxic Gas Contaminant Control in Advanced Life Support Systems

    NASA Technical Reports Server (NTRS)

    Pisharody, Suresh A.; Fisher, John W.; Wignarajah, K.

    2002-01-01

    The success of physico-chemical waste processing and resource recovery technologies for life support application depends partly on the ability of gas clean-up systems to efficiently remove trace contaminants generated during the process with minimal use of expendables. Carbon nanotubes promise superior performance over conventional approaches to gas clean-up due to their ability to direct the selective uptake of gaseous species based on their controlled pore size, high surface area, ordered chemical structure that allows functionalization and their effectiveness also as catalyst support materials for toxic gas conversion. We present results and findings from a preliminary study on the effectiveness of metal impregnated single walled nanotubes as catalyst/catalyst support materials for toxic gas contaminate control. The study included the purification of single walled nanotubes, the catalyst impregnation of the purified nanotubes, the experimental characterization of the surface properties of purified single walled nanotubes and the characterization of physisorption and chemisorption of uptake molecules.

  11. Critical role of bevacizumab scheduling in combination with pre-surgical chemo-radiotherapy in MRI-defined high-risk locally advanced rectal cancer: results of the branch trial

    PubMed Central

    Avallone, Antonio; Pecori, Biagio; Bianco, Franco; Aloj, Luigi; Tatangelo, Fabiana; Romano, Carmela; Granata, Vincenza; Marone, Pietro; Leone, Alessandra; Botti, Gerardo; Petrillo, Antonella; Caracò, Corradina; Iaffaioli, Vincenzo R.; Muto, Paolo; Romano, Giovanni; Comella, Pasquale; Budillon, Alfredo; Delrio, Paolo

    2015-01-01

    Background We have previously shown that an intensified preoperative regimen including oxaliplatin plus raltitrexed and 5-fluorouracil/folinic acid (OXATOM/FUFA) during preoperative pelvic radiotherapy produced promising results in locally advanced rectal cancer (LARC). Preclinical evidence suggests that the scheduling of bevacizumab may be crucial to optimize its combination with chemo-radiotherapy. Patients and methods This non-randomized, non-comparative, phase II study was conducted in MRI-defined high-risk LARC. Patients received three biweekly cycles of OXATOM/FUFA during RT. Bevacizumab was given 2 weeks before the start of chemo-radiotherapy, and on the same day of chemotherapy for 3 cycles (concomitant-schedule A) or 4 days prior to the first and second cycle of chemotherapy (sequential-schedule B). Primary end point was pathological complete tumor regression (TRG1) rate. Results The accrual for the concomitant-schedule was early terminated because the number of TRG1 (2 out of 16 patients) was statistically inconsistent with the hypothesis of activity (30%) to be tested. Conversely, the endpoint was reached with the sequential-schedule and the final TRG1 rate among 46 enrolled patients was 50% (95% CI 35%–65%). Neutropenia was the most common grade ≥3 toxicity with both schedules, but it was less pronounced with the sequential than concomitant-schedule (30% vs. 44%). Postoperative complications occurred in 8/15 (53%) and 13/46 (28%) patients in schedule A and B, respectively. At 5 year follow-up the probability of PFS and OS was 80% (95%CI, 66%–89%) and 85% (95%CI, 69%–93%), respectively, for the sequential-schedule. Conclusions These results highlights the relevance of bevacizumab scheduling to optimize its combination with preoperative chemo-radiotherapy in the management of LARC. PMID:26320185

  12. Advancements in the Synthesis and Applications of Cationic N-Heterocycles through Transition Metal-Catalyzed C-H Activation.

    PubMed

    Gandeepan, Parthasarathy; Cheng, Chien-Hong

    2016-02-18

    Cationic N-heterocycles are an important class of organic compounds largely present in natural and bioactive molecules. They are widely used as fluorescent dyes for biological studies, as well as in spectroscopic and microscopic methods. These compounds are key intermediates in many natural and pharmaceutical syntheses. They are also a potential candidate for organic light-emitting diodes (OLEDs). Because of these useful applications, the development of new methods for the synthesis of cationic N-heterocycles has received a lot of attention. In particular, many C-H activation methodologies that realize high step- and atom-economies toward these compounds have been developed. In this review, recent advancements in the synthesis and applications of cationic N-heterocycles through C-H activation reactions are summarized. The new C-H activation reactions described in this review are preferred over their classical analogs.

  13. Recent Advances in Layered Metal Chalcogenides as Superconductors and Thermoelectric Materials: Fe-Based and Bi-Based Chalcogenides.

    PubMed

    Mizuguchi, Yoshikazu

    2016-04-01

    Recent advances in layered (Fe-based and Bi-based) chalcogenides as superconductors or functional materials are reviewed. The Fe-chalcogenide (FeCh) family are the simplest Fe-based high-Tc superconductors. The superconductivity in the FeCh family is sensitive to external or chemical pressure, and high Tc is attained when the local structure (anion height) is optimized. The Bi-chalcogenide (BiCh2) family are a new group of layered superconductors with a wide variety of stacking structures. Their physical properties are also sensitive to external or chemical pressure. Recently, we revealed that the emergence of superconductivity and the Tc in this family correlate with the in-plane chemical pressure. Since the flexibility of crystal structure and electronic states are an advantage of the BiCh2 family for designing functionalities, I briefly review recent developments in this family as not only superconductors but also other functional materials.

  14. Strategy of Irrigation Branch in Russia

    NASA Astrophysics Data System (ADS)

    Zeyliger, A.; Ermolaeva, O.

    2012-04-01

    At this moment, at the starting time of the program on restoration of a large irrigation in Russia till 2020, the scientific and technical community of irrigation branch does not have clear vision on how to promote a development of irrigated agriculture and without repeating of mistakes having a place in the past. In many respects absence of a vision is connected to serious backlog of a scientific and technical and informational and technological level of development of domestic irrigation branch from advanced one. Namely such level of development is necessary for the resolving of new problems in new conditions of managing, and also for adequate answers to new challenges from climate and degradation of ground & water resources, as well as a rigorous requirement from an environment. In such important situation for irrigation branch when it is necessary quickly generate a scientific and technical politics for the current decade for maintenance of translation of irrigated agriculture in the Russian Federation on a new highly effective level of development, in our opinion, it is required to carry out open discussion of needs and requirements as well as a research for a adequate solutions. From political point of view a framework organized in FP6 DESIRE 037046 project is an example of good practice that can serve as methodical approach how to organize and develop such processes. From technical point of view a technology of operational management of irrigation at large scale presents a prospective alternative to the current type of management based on planning. From point of view ICT operational management demands creation of a new platform for the professional environment of activity. This platform should allow to perceive processes in real time, at their partial predictability on signals of a straight line and a feedback, within the framework of variability of decision making scenarious, at high resolution and the big ex-awning of sensor controls and the gauges

  15. Legislative Branch Appropriations Act, 2010

    THOMAS, 111th Congress

    Rep. Wasserman Schultz, Debbie [D-FL-20

    2009-06-17

    10/01/2009 Became Public Law No: 111-68. (PDF) (All Actions) Notes: Division A is the Legislative Branch Appropriations Act, 2010. Division B is the Continuing Appropriations Resolution, 2010. Tracker: This bill has the status Became LawHere are the steps for Status of Legislation:

  16. Legislative Branch Appropriations Act, 2010

    THOMAS, 111th Congress

    Rep. Wasserman Schultz, Debbie [D-FL-20

    2009-06-17

    10/01/2009 Became Public Law No: 111-68. (TXT | PDF) (All Actions) Notes: Division A is the Legislative Branch Appropriations Act, 2010. Division B is the Continuing Appropriations Resolution, 2010. Tracker: This bill has the status Became LawHere are the steps for Status of Legislation:

  17. Branching of keratin intermediate filaments.

    PubMed

    Nafeey, Soufi; Martin, Ines; Felder, Tatiana; Walther, Paul; Felder, Edward

    2016-06-01

    Keratin intermediate filaments (IFs) are crucial to maintain mechanical stability in epithelial cells. Since little is known about the network architecture that provides this stiffness and especially about branching properties of filaments, we addressed this question with different electron microscopic (EM) methods. Using EM tomography of high pressure frozen keratinocytes, we investigated the course of several filaments in a branching of a filament bundle. Moreover we found several putative bifurcations in individual filaments. To verify our observation we also visualized the keratin network in detergent extracted keratinocytes with scanning EM. Here bifurcations of individual filaments could unambiguously be identified additionally to bundle branchings. Interestingly, identical filament bifurcations were also found in purified keratin 8/18 filaments expressed in Escherichia coli which were reassembled in vitro. This excludes that an accessory protein contributes to the branch formation. Measurements of the filament cross sectional areas showed various ratios between the three bifurcation arms. This demonstrates that intermediate filament furcation is very different from actin furcation where an entire new filament is attached to an existing filament. Instead, the architecture of intermediate filament bifurcations is less predetermined and hence consistent with the general concept of IF formation.

  18. NCI: DCTD: Biometric Research Branch

    Cancer.gov

    The Biometric Research Branch (BRB) is the statistical and biomathematical component of the Division of Cancer Treatment, Diagnosis and Centers (DCTDC). Its members provide statistical leadership for the national and international research programs of the division in developmental therapeutics, developmental diagnostics, diagnostic imaging and clinical trials.

  19. NCI: DCTD: Biometric Research Branch

    Cancer.gov

    The Biometric Research Branch (BRP) is the statistical and biomathematical component of the Division of Cancer Treatment, Diagnosis and Centers (DCTDC). Its members provide statistical leadership for the national and international research programs of the division in developmental therapeutics, developmental diagnostics, diagnostic imaging and clinical trials.

  20. Risk Factor Assessment Branch (RFAB)

    Cancer.gov

    The Risk Factor Assessment Branch (RFAB) focuses on the development, evaluation, and dissemination of high-quality risk factor metrics, methods, tools, technologies, and resources for use across the cancer research continuum, and the assessment of cancer-related risk factors in the population.

  1. 76 FR 13272 - Branch Offices

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-10

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF THE TREASURY Office of Thrift Supervision Branch Offices AGENCY: Office of Thrift Supervision (OTS), Treasury. ACTION... 1995, 44 U.S.C. 3507. The Office of Thrift Supervision within the Department of the Treasury...

  2. Multiple pathways regulate shoot branching

    PubMed Central

    Rameau, Catherine; Bertheloot, Jessica; Leduc, Nathalie; Andrieu, Bruno; Foucher, Fabrice; Sakr, Soulaiman

    2015-01-01

    Shoot branching patterns result from the spatio-temporal regulation of axillary bud outgrowth. Numerous endogenous, developmental and environmental factors are integrated at the bud and plant levels to determine numbers of growing shoots. Multiple pathways that converge to common integrators are most probably involved. We propose several pathways involving not only the classical hormones auxin, cytokinins and strigolactones, but also other signals with a strong influence on shoot branching such as gibberellins, sugars or molecular actors of plant phase transition. We also deal with recent findings about the molecular mechanisms and the pathway involved in the response to shade as an example of an environmental signal controlling branching. We propose the TEOSINTE BRANCHED1, CYCLOIDEA, PCF transcription factor TB1/BRC1 and the polar auxin transport stream in the stem as possible integrators of these pathways. We finally discuss how modeling can help to represent this highly dynamic system by articulating knowledges and hypothesis and calculating the phenotype properties they imply. PMID:25628627

  3. Cash efficiency for bank branches.

    PubMed

    Cabello, Julia García

    2013-01-01

    Bank liquidity management has become a major issue during the financial crisis as liquidity shortages have intensified and have put pressure on banks to diversity and improve their liquidity sources. While a significant strand of the literature concentrates on wholesale liquidity generation and on the alternative to deposit funding, the management of an inventory of cash holdings within the banks' branches is also a relevant issue as any significant improvement in cash management at the bank distribution channels may have a positive effect in reducing liquidity tensions. In this paper, we propose a simple programme of cash efficiency for the banks' branches, very easy to implement, which conform to a set of instructions to be imposed from the bank to their branches. This model proves to significantly reduce cash holdings at branches thereby providing efficiency improvements in liquidity management. The methodology we propose is based on the definition of some stochastic processes combined with renewal processes, which capture the random elements of the cash flow, before applying suitable optimization programmes to all the costs involved in cash movements. The classical issue of the Transaction Demand for the Cash and some aspects of Inventory Theory are also present. Mathematics Subject Classification (2000) C02, C60, E50.

  4. Hydrogenolysis and homologation of linear and branched pentenes on Ru/SiO/sub 2/ catalysts: implication in the mechanism of C-C bond formation and cleavage on metal surfaces

    SciTech Connect

    Rodriguez, E.; Leconte, M.; Basset, J.M.; Tanaka, K.; Tanaka, K.I.

    1988-01-06

    Hydrogenolysis and homologation of 1-pentene to butenes and hexenes take place simultaneously and at the same rate over a Ru/SiO/sub 2/ catalysts at 110/sup 0/C, suggesting that these two reactions are mechanistically related. /sup 13/C labeling experiments indicate that C-C cleavage occurs at the double bond of 1-pentene-1-/sup 13/C leading to unlabeled 1-butene and labeled hexenes. The product distribution in the hydrogenolysis of 1-pentene, 2-pentenes, 3-methyl-1-butene, 2-methyl-2-butene, and 2-methyl-1-butene is accounted for by a carbene-olefin mechanism, which can therefore be considered as a reasonable common path for the formation and cleavage of carbon-carbon bonds on metal surfaces.

  5. Sedimentation and water quality in the West Branch Shade River basin, Ohio, 1984 water year

    USGS Publications Warehouse

    Childress, C.J.; Jones, R.L.

    1985-01-01

    Sedimentation in, and flooding of, the West Branch Shade River and its tributaries have been major concerns of residents and State and local officials. The area was extensively surface mined for coal between the mid-1940 's and the early 1960's. Reclamation efforts immediately after mining were unsuccessful. The results have been elevated sediment loads and the subsequent loss of channel conveyance. Two sediment and stream gaging stations were established on West Branch Shade River in the area of past mining to provide data to evaluate the effectiveness of current reclamation activities on reducing sediment loads. A third station was established on the East Branch Shade River in an unmined area as a control. From October 1983 through September 1984, the annual suspended sediment yield/acre-ft of runoff was approximately two times as high for West Branch Shade River (0.51 ton/acre-ft of runoff) as for East Branch Shade River (0.28 ton/acre-ft). In addition, water quality of West Branch indicates that acidity is higher, pH is lower, and concentrations of dissolved sulfate and metals are higher than for East Branch. The concentration of coal in bed material increased in the downstream direction along West Branch Shade River. The concentration downstream in the West Branch was more than 20 times greater than in the East Branch. (Author 's abstract)

  6. Advanced process characterization of a 10nm Metal 1 Logic layer using light source modulation and monitoring

    NASA Astrophysics Data System (ADS)

    Alagna, Paolo; Zurita, Omar; Timoshkov, Vadim; Wong, Patrick; Rechtsteiner, Greg; Baselmans, Jan; Mailfert, Julien; Conley, Will; Hsieh, Simon

    2015-09-01

    As ArF immersion lithography continues to be extended by adopting multi-patterning techniques, imaging requirements continue to become more stringent [1-3]. For multiple patterning based logic devices, the optimal printability is not only driven by the optimization of the optical proximity correction (OPC), but also by complex process factors, such as resist, exposure tool, and mask-related error performance levels. In addition the light source plays a crucial role; it has been widely demonstrated [4-8] how changes in the E95 bandwidth can significantly lead to changes in on wafer patterning due image contrast changes. Cymer has developed novel computational and experimental approaches to enable process characterization studies [9-11]. Using these techniques, simulations were used to assess how E95 bandwidth changes can erode the CDU budget on ≤ 20 nm logic features. Using the results of these simulations, experimental conditions were defined to study the on wafer impact of light source performance on an imec N10 Logic-type test vehicle via six different Metal 1 Logic features. The imaging metrics used to track patterning response are process window (PW), line width roughness (LWR), and local critical dimension uniformity (LCDU).

  7. Metals 2000

    SciTech Connect

    Allison, S.W.; Rogers, L.C.; Slaughter, G.; Boensch, F.D.; Claus, R.O.; de Vries, M.

    1993-05-01

    This strategic planning exercise identified and characterized new and emerging advanced metallic technologies in the context of the drastic changes in global politics and decreasing fiscal resources. In consideration of a hierarchy of technology thrusts stated by various Department of Defense (DOD) spokesmen, and the need to find new and creative ways to acquire and organize programs within an evolving Wright Laboratory, five major candidate programs identified are: C-17 Flap, Transport Fuselage, Mach 5 Aircraft, 4.Fighter Structures, and 5. Missile Structures. These results were formed by extensive discussion with selected major contractors and other experts, and a survey of advanced metallic structure materials. Candidate structural applications with detailed metal structure descriptions bracket a wide variety of uses which warrant consideration for the suggested programs. An analysis on implementing smart skins and structures concepts is given from a metal structures perspective.

  8. FY 1991 Measurements and Characterization Branch annual report

    SciTech Connect

    Osterwald, C.R.; Dippo, P.C.

    1992-11-01

    The Measurements and Characterization Branch of the National Renewable Laboratory (NREL) provides comprehensive photovoltaic (PV) materials, devices, characterization, measurement, fabrication, modeling research, and support for the international PV research community, in the context of the US Department of Energy`s Photovoltaic Research Program goals. This report summarizes the progress of the Branch from 31 January 1991 through 31 January 1992. The eight technical sections present a succinct overview of the capabilities and accomplishments of each group in the Branch. The Branch is comprised of the following groups: Surface and interface Analysis; Materials Characterization; Device Development; Electro-optical Characterization; Advanced PV module Performance and Reliability Research; Cell Performance Characterization; Surface Interactions, Modification, and Stability; and FTIR Spectroscopic Research. The including measurements and tests of PV materials, cells, submodules, and modules. The report contains a comprehensive bibliography of 77 branch originated journal and conference publications, which were authored in collaboration with, or in support of, approximately 135 university, industrial, government, and in-house research groups.

  9. FY 1991 Measurements and Characterization Branch annual report

    SciTech Connect

    Osterwald, C.R.; Dippo, P.C.

    1992-11-01

    The Measurements and Characterization Branch of the National Renewable Laboratory (NREL) provides comprehensive photovoltaic (PV) materials, devices, characterization, measurement, fabrication, modeling research, and support for the international PV research community, in the context of the US Department of Energy's Photovoltaic Research Program goals. This report summarizes the progress of the Branch from 31 January 1991 through 31 January 1992. The eight technical sections present a succinct overview of the capabilities and accomplishments of each group in the Branch. The Branch is comprised of the following groups: Surface and interface Analysis; Materials Characterization; Device Development; Electro-optical Characterization; Advanced PV module Performance and Reliability Research; Cell Performance Characterization; Surface Interactions, Modification, and Stability; and FTIR Spectroscopic Research. The including measurements and tests of PV materials, cells, submodules, and modules. The report contains a comprehensive bibliography of 77 branch originated journal and conference publications, which were authored in collaboration with, or in support of, approximately 135 university, industrial, government, and in-house research groups.

  10. DNA-templated three-branched nanostructures for nanoelectronic devices.

    PubMed

    Becerril, Héctor A; Stoltenberg, Randall M; Wheeler, Dean R; Davis, Robert C; Harb, John N; Woolley, Adam T

    2005-03-09

    Three-branched DNA molecules have been designed and assembled from oligonucleotide components. These nucleic acid constructs contain double- and single-stranded regions that control the hybridization behavior of the assembly. Specific localization of a single streptavidin molecule at the center of the DNA complex has been investigated as a model system for the directed placement of nanostructures. Highly selective silver and copper metallization of the DNA template has also been characterized. Specific hybridization of these DNA complexes to oligonucleotide-coupled nanostructures followed by metallization should provide a bottom-up self-assembly route for the fabrication and characterization of discrete three-terminal nanodevices.

  11. To branch or not to branch: Numerical modeling of dynamically branching faults

    NASA Astrophysics Data System (ADS)

    Dedontney, N. L.; Templeton Barrett, E. L.; Rice, J. R.; Dmowska, R.

    2009-12-01

    Branched fault geometries, and branched rupture paths, occur in strike-slip as well as dip-slip settings [e.g., Poliakov et al., JGR, 2002; Kame et al., JGR, 2003]. The Wenchuan earthquake illustrates such a branched geometry [Hubbard and Shaw, 2009] in a fold and thrust belt, and surface ruptures provide constraints on which faults were activated co-seismically. Additionally, a branched structure, the Central Basin Decollement [Shaw & Suppe, 1996], underlies the Los Angeles Basin. By simulating the dynamic rupture path selection, using explicit finite element methods here, we are able to estimate which faults should be activated under given conditions. Factors that influence coseismic branch activation have been extensively studied [Poliakov et al.; Kame et al.; Oglesby et al., 2003, 2004; Bhat et al., 2004, 2007]. The results show that the rupture velocity, pre-stress orientation and fault geometry influence rupture path selection. We show further that the ratio of σ1/σ3 (equivalently, the seismic S ratio) and the relative frictional fault strength also play a significant role in determining which faults are activated. Our methodology has recently included the use of a regularized friction routine [Ranjith & Rice, 2001; Cochard & Rice, 2000] which reduces the growth of numerical noise throughout the simulations. A difficulty arises in the treatment of surface interactions at the branch junction. When local opening does not occur there, slip on the branch fault must vanish at the junction, a constraint that we impose on the FE model. However, the FE contact routine used demands that slip always be constrained to zero on one or the other fault at such a junction, which is problematic when opening occurs. There is then no fundamental basis for constraining slip at the junction to zero on either fault, and the choice made affects the slip distributions and rupture path selection. Many analyses that we perform are elastic and the same material is used on both sides

  12. Branching processes in disease epidemics

    NASA Astrophysics Data System (ADS)

    Singh, Sarabjeet

    Branching processes have served as a model for chemical reactions, biological growth processes and contagion (of disease, information or fads). Through this connection, these seemingly different physical processes share some common universalities that can be elucidated by analyzing the underlying branching process. In this thesis, we focus on branching processes as a model for infectious diseases spreading between individuals belonging to different populations. The distinction between populations can arise from species separation (as in the case of diseases which jump across species) or spatial separation (as in the case of disease spreading between farms, cities, urban centers, etc). A prominent example of the former is zoonoses -- infectious diseases that spill from animals to humans -- whose specific examples include Nipah virus, monkeypox, HIV and avian influenza. A prominent example of the latter is infectious diseases of animals such as foot and mouth disease and bovine tuberculosis that spread between farms or cattle herds. Another example of the latter is infectious diseases of humans such as H1N1 that spread from one city to another through migration of infectious hosts. This thesis consists of three main chapters, an introduction and an appendix. The introduction gives a brief history of mathematics in modeling the spread of infectious diseases along with a detailed description of the most commonly used disease model -- the Susceptible-Infectious-Recovered (SIR) model. The introduction also describes how the stochastic formulation of the model reduces to a branching process in the limit of large population which is analyzed in detail. The second chapter describes a two species model of zoonoses with coupled SIR processes and proceeds into the calculation of statistics pertinent to cross species infection using multitype branching processes. The third chapter describes an SIR process driven by a Poisson process of infection spillovers. This is posed as a

  13. New branches of massive gravity

    NASA Astrophysics Data System (ADS)

    Comelli, D.; Crisostomi, M.; Koyama, K.; Pilo, L.; Tasinato, G.

    2015-06-01

    The basic building block for Lorentz-invariant and ghost-free massive gravity is the square root of the combination g-1η , where g-1 is the inverse of the physical metric and η is a reference metric. Since the square root of a matrix is not uniquely defined, it is possible to have physically inequivalent potentials corresponding to different branches. We show that around the Minkowski background, the only perturbatively well-defined branch is the potential proposed by de Rham, Gabadadze and Tolley. On the other hand, if Lorentz symmetry is broken spontaneously, other potentials exist with a standard perturbative expansion. We show this explicitly building new Lorentz-invariant, ghost-free massive gravity potentials for theories that in the background preserve rotational invariance but break Lorentz boosts.

  14. Horizontal-branch stellar evolution

    NASA Technical Reports Server (NTRS)

    Sweigart, Allen V.

    1990-01-01

    The results of canonical theory for the evolution of horizontal-branch (HB) stars are examined. Particular attention is given to how an HB star maintains the appropriate composition distribution within the semiconvective zone and how this composition is affected by the finite time-dependence with which convective boundaries actually move. Newly developed models based on time-dependent overshooting are presented for both the core-helium-exhaustion and main HB phases.

  15. Solid State Photovoltaic Research Branch

    SciTech Connect

    Not Available

    1990-09-01

    This report summarizes the progress of the Solid State Photovoltaic Research Branch of the Solar Energy Research Institute (SERI) from October 1, 1988, through September 30,l 1989. Six technical sections of the report cover these main areas of SERIs in-house research: Semiconductor Crystal Growth, Amorphous Silicon Research, Polycrystalline Thin Films, III-V High-Efficiency Photovoltaic Cells, Solid-State Theory, and Laser Raman and Luminescence Spectroscopy. Sections have been indexed separately for inclusion on the data base.

  16. The effect of molybdenum on the physical and mechanical metallurgy of advanced titanium-aluminide alloys and metal matrix composites

    NASA Astrophysics Data System (ADS)

    Quast, Jeffrey Paul

    This dissertation represents a systematic study of microstructure-mechanical property relationships of titanium-aluminum-niobium-molybdenum (Ti-Al-Nb-Mo) alloys and metal matrix composites (MMCs). The aspects investigated were the microstructures, elevated-temperature creep behavior, room-temperature and elevated-temperature tensile behavior, and the out-of-phase thermomechanical fatigue behavior. The specific alloy compositions investigated were: Ti-24Al-17Nb-0.66Mo (at.%) and Ti-24Al-17Nb-2.3Mo (at.%). The MMCs were reinforced with Ultra SCS-6 fibers and the specific compositions of the matrices were: Ti-24Al-17Nb-0.66Mo (at.%), Ti-24Al-17Nb-1.1Mo (at.%), and Ti-24Al-17Nb-2.3Mo (at.%). All of the materials were fabricated using a powder-metallurgy, tape casting technique. A subtransus heat-treatment produced microstructures containing a hexagonal close-packed a2 phase, orthorhombic (O) phase, and a body-centered cubic (BCC) phase. The higher Mo contents were shown to stabilize the BCC phase and result in an increase the O+BCC phase volume percent and a subsequent decrease in the a2 phase volume percent. The creep deformation behavior of the alloys and MMCs was the main focus of this dissertation. Creep experimentation was performed to understand the deformation mechanisms as a function of stress, temperature, and strain rate. Higher Mo contents significantly increased the creep resistance of the alloys, which was attributed to the decrease in the number of a2/a2 grain boundaries, increased O+BCC colony size, and Mo solid solution strengthening. This was one of the major findings of the work. In-situ tensile-creep experiments indicated that grain boundaries were the locus of deformation and cracking in each of the alloys investigated. MMC creep experimentation was performed with the fibers aligned perpendicular to the loading direction. Similar to alloy creep results, higher Mo contents increased the creep resistance of the MMCs. However, the creep resistance of

  17. Walker Branch Watershed Ecosystems Data

    DOE Data Explorer

    Walker Branch Watershed is located on the U. S. Department of Energy's Oak Ridge Reservation near Oak Ridge, in Anderson County, Tennessee. The Walker Branch Watershed Project began in 1967 under sponsorship of the U. S. Atomic Energy Commission (now the U. S. Department of Energy). Initially, the project centered primarily on the geologic and hydrologic processes that control the amounts and chemistry of water moving through the watershed. Past projects have included: • U. S. Department of Energy funded studies of watershed hydrology and forest nutrient dynamics • National Oceanic and Atmospheric Administration funded studies of forest micrometeorology • Studies of atmospheric deposition under the National Atmospheric Deposition Program • The International Biological Program Eastern Deciduous Forest Biome Project • National Science Foundation sponsored studies of trace element cycling and stream nutrient spiraling • Electric Power Research Institute funded studies of the effects of acidic deposition on canopy processes and soil chemistry. These projects have all contributed to a more complete understanding of how forest watersheds function and have provided insights into the solution of energy-related problems associated with air pollution, contaminant transport, and forest nutrient dynamics. This is one of a few sites in the world characterized by long-term, intensive environmental studies. The Walker Branch Watershed website at http://walkerbranch.ornl.gov/ provides maps, photographs, and data on climate, precipitation, atmospheric deposition, stream discharge and runoff, stream chemistry, and vegetation. [Taken from http://walkerbranch.ornl.gov/ABOUTAAA.HTM

  18. Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 11: Computer-Aided Manufacturing & Advanced CNC, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

    ERIC Educational Resources Information Center

    Texas State Technical Coll., Waco.

    This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

  19. Managing occurrence branching in qualitative simulation

    SciTech Connect

    Tokuda, L.

    1996-12-31

    Qualitative simulators can produce common sense abstractions of complex behaviors given only partial knowledge about a system. One of the problems which limits the applicability of qualitative simulators is the intractable branching of successor states encountered with model of even modest size. Some branches may be unavoidable due to the complex nature of a system. Other branches may be accidental results of the model chosen. A common source of intractability is occurrence branching. Occurrence branching occurs when the state transitions of two variables are unordered with respect to each other. This paper extends the QSIM model to distinguish between interesting occurrence branching and uninteresting occurrence branching. A representation, algorithm, and simulator for efficiently handling uninteresting branching is presented.

  20. Advanced technology and manufacturing practices for machining and inspecting metal matrix composites. Final CRADA report for CRADA number Y-1292-0092

    SciTech Connect

    Fell, H.A.; Shelton, J.E.; LaMance, G.M.; Kennedy, C.R.

    1995-02-26

    Lockheed Martin Energy Systems, Inc. (Energy Systems) and the Lanxide Corporation (Lanxide) negotiated a Cooperative Research and Development Agreement (CRADA) to develop advanced technology and manufacturing practices for machining and inspecting metal matrix composites (MMC). The objective of this CRADA was to develop machining parameters to allow manufacturing of automotive components from MMCs. These parts exhibit a range of shapes and dimensional tolerances and require a large number of machining operations. The common characteristic of the components is the use of the light weight MMC materials to replace heavier materials. This allows smaller and lighter moving parts and supporting structural components thereby increasing fuel mileage. The CRADA was divided into three areas: basic investigation of cutting parameters, establishment of a mock production line for components, and optimization of parameters in the mock facility. This report covers the manufacturing of MMCs and preliminary Phase I testing for silicon carbide having various loading percentages and extensive Phase I testing of cutting parameters on 30% alumina loaded aluminum. On January 26, 1995, a letter from the vice president, technology at Lanxide was issued terminating the CRADA due to changes in business. 9 refs., 18 figs., 3 tabs.

  1. Treatment of metal-laden hazardous wastes with advanced clean coal technology by-products. Quarterly report, November 1994--February 1995

    SciTech Connect

    1995-03-01

    This second quarterly report describes work during the second three months of the University of Pittsburgh`s (Pitt`s) project on the {open_quotes}Treatment of Metal-Laden Hazardous Wastes with Advanced Clean Coal Technology By-Products.{close_quotes} Participating with Pitt on this project are Dravo Lime Company (DLC), Mill Service, Inc. (MSI) and the Center for Hazardous Materials Research (CHMR). The report describes the activities of the project team during the reporting period. The principal work has focussed upon the acquisition of by-product samples and their initial analysis. Other efforts during the second quarter have been directed toward identifying the first hazardous waste samples and preparing for their treatment and analysis. Relatively little data has yet been collected. Major presentation of technical details and data will appear for the first time in the third quarterly report. The activity on the project during the second quarter of Phase One, as presented in the following sections, has fallen into seven areas: (1) Acquiring by-products, (2) Analyzing by-products, (3) Identifying, analyzing and treating suitable hazardous wastes, (4) Carrying out the quality assurance/quality control program, (5) Developing background, and (6) Initiating public relations

  2. Guide to the Seattle Archives Branch.

    ERIC Educational Resources Information Center

    Hobbs, Richard, Comp.

    The guide presents an overview of the textual and microfilmed records located at the Seattle Branch of the National Archives of the United States. Established in 1969, the Seattle Archives Branch is one of 11 branches which preserve and make available for research those U.S. Government records of permanent value created and maintained by Federal…

  3. Introduction of Branching Degrees of Octane Isomers.

    PubMed

    Perdih, Anton

    2016-01-01

    The concept of branching degrees is introduced. In the case of octane isomers it is derived from the values of a set of their physicochemical properties, calculating for each isomer the average of the normalized values and these averages are defined as branching degrees of octane isomers. The sequence of these branching degrees of octane isomers does not differ much from the »regular« one defined earlier. 2,2-Dimethylhexane appears to be less branched than 3,4-dimethylhexane and 3-ethyl, 2-methylpentane, whereas 2,3,4-trimethylpentane appears to be less branched than 3-ethyl, 3-methylpentane. While the increasing number of branches gives rise to increasing branching degrees, the peripheral position of branches and the separation between branches decreases the value of the branching degree. The central position of branches increases it. A bigger branch increases it more than a smaller one. The quantification of these structural features and their correlations with few indices is given as well.

  4. Structural dynamics branch research and accomplishments

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Summaries are presented of fiscal year 1989 research highlights from the Structural Dynamics Branch at NASA Lewis Research Center. Highlights from the branch's major work areas include aeroelasticity, vibration control, dynamic systems, and computation structural methods. A listing of the fiscal year 1989 branch publications is given.

  5. Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 8: Sheet Metal & Composites, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

    ERIC Educational Resources Information Center

    Texas State Technical Coll., Waco.

    This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

  6. Search for Carbon-Rich Asymptotic Giant Branch Stars in Milky Way Globular Clusters

    NASA Astrophysics Data System (ADS)

    Indahl, Briana; Pessev, P.

    2014-01-01

    From our current understanding of stellar evolution, it would not be expected to find carbon rich asymptotic giant branch (AGB) stars in Milky Way globular clusters. Due to the low metallicity of the population II stars making up the globular clusters and their age, stars large enough to fuse carbon should have already evolved off of the asymptotic giant branch. Recently, however, there have been serendipitous discoveries of these types of stars. Matsunaga et al. (2006) discovered a Mira variable in the globular cluster Lynga 7. It was later confirmed by Feast et al. (2012) that the star is a member of the cluster and must be a product of a stellar merger. In the same year, Sharina et al. (2012) discovered a carbon star in the low metallicity globular cluster NGC6426 and reports it to be a CH star. Five more of these types of stars have been made as serendipitous discoveries and have been reported by Harding (1962), Dickens (1972), Cote et al. (1997), and Van Loon (2007). The abundance of these types of carbon stars in Milky Way globular clusters has been unknown because the discovery of these types of objects has only ever been a serendipitous discovery. These stars could have been easily overlooked in the past as they are outside the typical parameter space of galactic globular clusters. Also advances in near-infrared instruments and observing techniques have made it possible to detect the fainter carbon stars in binary systems. Having an understanding of the abundances of carbon stars in galactic globular clusters will aid in the modeling of globular cluster and galaxy formation leading to a better understanding of these processes. To get an understanding of the abundances of these stars we conducted the first comprehensive search for AGB carbon stars into all Milky Way globular clusters listed in the Harris Catalog (expect for Pyxis). I have found 128 carbon star candidates using methods of comparing color magnitude diagrams of the clusters with the carbon

  7. Galactic planetary nebulae with precise nebular abundances as a tool to understand the evolution of asymptotic giant branch stars

    NASA Astrophysics Data System (ADS)

    García-Hernández, D. A.; Ventura, P.; Delgado-Inglada, G.; Dell'Agli, F.; Di Criscienzo, M.; Yagüe, A.

    2016-09-01

    We present nucleosynthesis predictions (HeCNOCl) from asymptotic giant branch (AGB) models, with diffusive overshooting from all the convective borders, in the metallicity range Z⊙/4 < Z < 2 Z⊙. They are compared to recent precise nebular abundances in a sample of Galactic planetary nebulae (PNe) that is divided among double-dust chemistry (DC) and oxygen-dust chemistry (OC) according to the infrared dust features. Unlike the similar subsample of Galactic carbon-dust chemistry PNe recently analysed by us, here the individual abundance errors, the higher metallicity spread, and the uncertain dust types/subtypes in some PNe do not allow a clear determination of the AGB progenitor masses (and formation epochs) for both PNe samples; the comparison is thus more focused on a object-by-object basis. The lowest metallicity OC PNe evolve from low-mass (˜1 M⊙) O-rich AGBs, while the higher metallicity ones (all with uncertain dust classifications) display a chemical pattern similar to the DC PNe. In agreement with recent literature, the DC PNe mostly descend from high-mass (M ≥ 3.5 M⊙) solar/supersolar metallicity AGBs that experience hot bottom burning (HBB), but other formation channels in low-mass AGBs like extra mixing, stellar rotation, binary interaction, or He pre-enrichment cannot be disregarded until more accurate C/O ratios would be obtained. Two objects among the DC PNe show the imprint of advanced CNO processing and deep second dredge-up, suggesting progenitors masses close to the limit to evolve as core collapse supernovae (above 6M⊙). Their actual C/O ratio, if confirmed, indicate contamination from the third dredge-up, rejecting the hypothesis that the chemical composition of such high-metallicity massive AGBs is modified exclusively by HBB.

  8. Testimony of Fred R. Mynatt before the Energy Research and Development Subcommittee of the Committee on Science, Space, and Technology, US House of Representatives. [Advanced fuel technology, gas-cooled reactor technology, and liquid metal-cooled reactor technology programs

    SciTech Connect

    Mynatt, F.R.

    1987-03-18

    This report provides a description of the statements submitted for the record to the committee on Science, Space, and Technology of the United States House of Representatives. These statements describe three principal areas of activity of the Advanced Reactor Technology Program of the Department of Energy (DOE). These areas are advanced fuel cycle technology, modular high-temperature gas-cooled reactor technology, and liquid metal-cooled reactor. The areas of automated reactor control systems, robotics, materials and structural design shielding and international cooperation were included in these statements describing the Oak Ridge National Laboratory's efforts in these areas. (FI)

  9. Argonne Liquid-Metal Advanced Burner Reactor : components and in-vessel system thermal-hydraulic research and testing experience - pathway forward.

    SciTech Connect

    Kasza, K.; Grandy, C.; Chang, Y.; Khalil, H.; Nuclear Engineering Division

    2007-06-30

    This white paper provides an overview and status report of the thermal-hydraulic nuclear research and development, both experimental and computational, conducted predominantly at Argonne National Laboratory. Argonne from the early 1970s through the early 1990s was the Department of Energy's (DOE's) lead lab for thermal-hydraulic development of Liquid Metal Reactors (LMRs). During the 1970s and into the mid-1980s, Argonne conducted thermal-hydraulic studies and experiments on individual reactor components supporting the Experimental Breeder Reactor-II (EBR-II), Fast Flux Test Facility (FFTF), and the Clinch River Breeder Reactor (CRBR). From the mid-1980s and into the early 1990s, Argonne conducted studies on phenomena related to forced- and natural-convection thermal buoyancy in complete in-vessel models of the General Electric (GE) Prototype Reactor Inherently Safe Module (PRISM) and Rockwell International (RI) Sodium Advanced Fast Reactor (SAFR). These two reactor initiatives involved Argonne working closely with U.S. industry and DOE. This paper describes the very important impact of thermal hydraulics dominated by thermal buoyancy forces on reactor global operation and on the behavior/performance of individual components during postulated off-normal accident events with low flow. Utilizing Argonne's LMR expertise and design knowledge is vital to the further development of safe, reliable, and high-performance LMRs. Argonne believes there remains an important need for continued research and development on thermal-hydraulic design in support of DOE's and the international community's renewed thrust for developing and demonstrating the Global Nuclear Energy Partnership (GNEP) reactor(s) and the associated Argonne Liquid Metal-Advanced Burner Reactor (LM-ABR). This white paper highlights that further understanding is needed regarding reactor design under coolant low-flow events. These safety-related events are associated with the transition from normal high

  10. Rotational Velocities of Field Blue Horizontal Branch Stars

    NASA Astrophysics Data System (ADS)

    Weafer, V. K.; Fulbright, J. P.

    2001-12-01

    This study is motivated by interest in the much-debated ``second-parameter" problem. Deep mixing, driven by angular momentum, has been proposed as a second parameter controlling horizontal-branch colour morphology (Sweigart & Mengel 1979). Observations of low-metallicity field giant stars show little evidence of deep mixing (Kraft 1994, Wallerstein et al. 1997, Gratton et al. 2000). We therefore expect that field horizontal branch stars may show little evidence of rotation. We have used high-resolution spectra from Keck and Lick observatories to find the projected rotational velocity (v sin i) of 44 blue (-0.04 <= B-V <= 0.20) horizontal branch stars in the halo field. Selected Fe and Ti absorption lines were co-added in velocity space to create an average line profile for each star. To find v sin i, the average profile was compared to similarly-averaged synthesised lines. We have compared the v sin i values of the sample to those of the blue horizontal branch stars in the second-parameter globular-cluster pair, M3 and M13 (Peterson et al. 1995). Although further work is needed to completely establish the velocity distribution of the sample, we have found that the sample has rotational velocities more similar to M13 than to M3, with at least 5 stars showing v sin i > = 25 km/s.

  11. S-branch CARS applicability to thermometry

    SciTech Connect

    Akihama, K.; Asai, T. )

    1990-07-20

    The pressure and temperature dependence of background-free {ital S}-branch CARS spectra of N{sub 2} are investigated in the temperature range of 300--700 K for pressures of 1--20 atm. Collisional narrowing for {ital S}-branch CARS spectra is proved to be negligible. Individual {ital S}-branch lines are clearly resolved in the entire range, enabling unequivocal determination of temperatures by their peak ratios. Advantages and disadvantages of {ital S}-branch CARS thermometry are discussed on the basis of experimental results. The dual narrowband Stokes CARS technique is also discussed as a practical method of {ital S}-branch CARS thermometry.

  12. S-branch CARS applicability to thermometry.

    PubMed

    Akihama, K; Asai, T

    1990-07-20

    The pressure and temperature dependence of background-free S-branch CARS spectra of N(2) are investigated in the temperature range of 300-700 K for pressures of 1-20 atm. Collisional narrowing for S-branch CARS spectra is proved to be negligible. Individual S-branch lines are clearly resolved in the entire range, enabling unequivocal determination of temperatures by their peak ratios. Advantages and disadvantages of S-branch CARS thermometry are discussed on the basis of experimental results. The dual narrowband Stokes CARS technique is also discussed as a practical method of S-branch CARS thermometry.

  13. Advanced solar dynamic technology program

    NASA Technical Reports Server (NTRS)

    Calogeras, James

    1990-01-01

    Viewgraphs and discussion on Advanced Solar Dynamic Technology Program are presented. Topics covered include: advanced solar dynamic technology program; advanced concentrators; advanced heat receivers; power conversion systems; dished all metal honeycomb sandwich panels; Stirling cavity heat pipe receiver; Brayton solar receiver; and thermal energy storage technology.

  14. Evolutionary branching under slow directional evolution.

    PubMed

    Ito, Hiroshi C; Dieckmann, Ulf

    2014-11-07

    Evolutionary branching is the process by which ecological interactions induce evolutionary diversification. In asexual populations with sufficiently rare mutations, evolutionary branching occurs through trait-substitution sequences caused by the sequential invasion of successful mutants. A necessary and sufficient condition for evolutionary branching of univariate traits is the existence of a convergence stable trait value at which selection is locally disruptive. Real populations, however, undergo simultaneous evolution in multiple traits. Here we extend conditions for evolutionary branching to bivariate trait spaces in which the response to disruptive selection on one trait can be suppressed by directional selection on another trait. To obtain analytical results, we study trait-substitution sequences formed by invasions that possess maximum likelihood. By deriving a sufficient condition for evolutionary branching of bivariate traits along such maximum-likelihood-invasion paths (MLIPs), we demonstrate the existence of a threshold ratio specifying how much disruptive selection in one trait direction is needed to overcome the obstruction of evolutionary branching caused by directional selection in the other trait direction. Generalizing this finding, we show that evolutionary branching of bivariate traits can occur along evolutionary-branching lines on which residual directional selection is sufficiently weak. We then present numerical analyses showing that our generalized condition for evolutionary branching is a good indicator of branching likelihood even when trait-substitution sequences do not follow MLIPs and when mutations are not rare. Finally, we extend the derived conditions for evolutionary branching to multivariate trait spaces.

  15. Growth of branched actin networks against obstacles.

    PubMed Central

    Carlsson, A E

    2001-01-01

    A method for simulating the growth of branched actin networks against obstacles has been developed. The method is based on simple stochastic events, including addition or removal of monomers at filament ends, capping of filament ends, nucleation of branches from existing filaments, and detachment of branches; the network structure for several different models of the branching process has also been studied. The models differ with regard to their inclusion of effects such as preferred branch orientations, filament uncapping at the obstacle, and preferential branching at filament ends. The actin ultrastructure near the membrane in lamellipodia is reasonably well produced if preferential branching in the direction of the obstacle or barbed-end uncapping effects are included. Uncapping effects cause the structures to have a few very long filaments that are similar to those seen in pathogen-induced "actin tails." The dependence of the growth velocity, branch spacing, and network density on the rate parameters for the various processes is quite different among the branching models. An analytic theory of the growth velocity and branch spacing of the network is described. Experiments are suggested that could distinguish among some of the branching models. PMID:11566765

  16. Real-time in-situ chemical sensing in aluminum gallium nitride/gallium nitride metal-organic chemical vapor deposition processes for advanced process control

    NASA Astrophysics Data System (ADS)

    Cho, Soon

    Gallium nitride and its alloys promise to be key materials for future semiconductor devices aimed at high frequency, high power electronic applications. However, manufacturing for such high performance products is challenged by reproducibility and material quality constraints that are notably more stringent than those required for optoelectronic applications. To meet this challenge, in-situ mass spectrometry was implemented as a real-time process- and wafer-state metrology tool in AlGaN/GaN/AlN metal-organic chemical vapor deposition processes on semi-insulating SiC substrate wafers. Dynamic chemical sensing through the process cycle, carried out downstream from the wafer, revealed generation of methane and ethane reaction byproducts, as well as other residual gas species. Real-time metrics were derived based on the chemical signals to predict/control material quality and thickness of critical layers within the heterostructure in real time during growth, and corresponding metrologies were used for real-time advanced process control. Using the methane/ethane ratio, GaN epilayer crystal quality was predicted in real time to 2--5% precision, which was verified by post-process x-ray diffraction. Moreover, the same real-time metric predicted material quality as indicated by post-process photoluminescence band-edge intensities to ˜5% precision. The methane/ethane ratio has a fundamental significance in terms of the intrinsic chemistry in that the two byproducts are believed to reflect two parallel reaction pathways leading to GaN-based material growth, namely the gas phase adduct formation route and the surface route for direct precursor decomposition, respectively. The fact that lower methane/ethane ratios consistently yield better material quality suggests that the surface pathway is preferred for high quality GaN growth. In addition, a metric based on methane and ethane signals integrated through the AlGaN growth period (˜1 min or less) enabled prediction of the cap

  17. Chiral methyl-branched pheromones.

    PubMed

    Ando, Tetsu; Yamakawa, Rei

    2015-07-01

    Insect pheromones are some of the most interesting natural products because they are utilized for interspecific communication between various insects, such as beetles, moths, ants, and cockroaches. A large number of compounds of many kinds have been identified as pheromone components, reflecting the diversity of insect species. While this review deals only with chiral methyl-branched pheromones, the chemical structures of more than one hundred non-terpene compounds have been determined by applying excellent analytical techniques. Furthermore, their stereoselective syntheses have been achieved by employing trustworthy chiral sources and ingenious enantioselective reactions. The information has been reviewed here not only to make them available for new research but also to understand the characteristic chemical structures of the chiral pheromones. Since biosynthetic studies are still limited, it might be meaningful to examine whether the structures, particularly the positions and configurations of the branched methyl groups, are correlated with the taxonomy of the pheromone producers and also with the function of the pheromones in communication systems.

  18. A Catalog of Candidate Field Horizontal-Branch and A-Type Stars. II.

    NASA Astrophysics Data System (ADS)

    Beers, Timothy C.; Wilhelm, Ronald; Doinidis, Stephen P.; Mattson, Caroline J.

    1996-04-01

    We present coordinates and brightness estimates for 4175 candidate field horizontal-branch and A-type stars, in the magnitude range 10 ≤ B ≤ 15.5, selected using an objective-prism/interference-filter survey technique. The candidates lie primarily in the northern Galactic hemisphere and complement a previously published sample of southern Galactic hemisphere candidates. Available spectroscopy and photometry indicates that the great majority of the candidates are likely to be bona fide members of either the field blue horizontal-branch population or the blue, metal-deficient, high surface gravity stars referred to by Preston, Beers, & Shectman as BMP stars. The remaining stars in the catalog are likely to be a mix of metal-deficient turnoff stars, metallic-line (Am) stars, field red horizontal-branch stars, optical doubles with overlapping objective-prism spectra, and (particularly among the fainter candidates) inadvertently included late-type stars.

  19. Advanced metal oxide varistor concepts

    NASA Astrophysics Data System (ADS)

    Philipp, H. R.; Mahan, G. D.; Levinson, L. M.

    1984-07-01

    Zinc oxide varistors are ZnO-based ceramic semiconductor devices with highly nonlinear current-voltage characteristics similar to back-to-back Zener diodes but with much greater current, voltage, and energy-handling capabilities. Zinc oxide varistors have proven useful in a variety of applications, particularly as high-quality voltage suppression devices for the protection of ac and dc electric power transmission systems against the effects of transient overvoltages due to switching surges and lightning strikes. Simple varistor systems that use Bi or Pr as the varistor-forming additive and Co or Mn as the varistor-performance ingredient were studied. Commercial varistor materials generally use Bi as the varistor-forming ingredient, and the sintering process in such material probably proceeds in the liquid phase. Varistor materials that use Pr as the varistor-forming ingredient are also produced commercially.

  20. Generic technique to generate large branched DNA complexes.

    PubMed

    Tosch, Paul; Wälti, Christoph; Middelberg, Anton P J; Davies, A Giles

    2006-03-01

    The inherent self-recognition properties of DNA have led to its use as a scaffold for various nanotechnology self-assembly applications, with macromolecular complexes, metallic and semiconducting nanoparticles, proteins, inter alia, being assembled onto a designed DNA scaffold. Such structures may typically comprise a number of DNA molecules organized into macromolecules. Many studies have used synthetic methods to produce the constituent DNA molecules, but this typically constrains the molecules to be no longer than around 100 base pairs (30 nm). However, applications that require larger self-assembling DNA complexes, several tens of nanometers or more, need to be generated by other techniques. Here, we present a generic technique to generate large linear, branched, and/or circular DNA macromolecular complexes. The effectiveness of this technique is demonstrated here by the use of Lambda Bacteriophage DNA as a template to generate single- and double-branched DNA structures approximately 120 nm in size.

  1. 19. DETAIL, METAL LIGHT STANDARD, AT NORTH END BLOCK OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. DETAIL, METAL LIGHT STANDARD, AT NORTH END BLOCK OF EAST PARAPET, FROM WEST, SHOWING SIMPLE ORNAMENTATION OF BASE OF STANDARD, WITH 'UNION METAL' IMPRINT - Fifth Street Viaduct, Spanning Bacon's Quarter Branch Valley on Fifth Street, Richmond, Independent City, VA

  2. The structure of horizontal-branch models. I - The zero-age horizontal branch

    NASA Technical Reports Server (NTRS)

    Dorman, Ben

    1992-01-01

    A detailed study of the structure of zero-age horizontal-branch (ZAHB) models is studied in order to show how the hydrostatic structure of these models changes with the input parameters and determines the H-R diagram location of a given model. The properties of composite polytropes on the homology-invariant (U,V)-plane are demonstrated. A variety of test models and sequences were constructed to elucidate the underlying factors that give rise to the wide variation in HB model properties with composition. The roles of the CNO elements as nuclear catalysts and of the envelope sources, as well as the envelope helium abundance are reexamined. It is found that, for stars of a fixed range of mass arriving on the HB, the stellar distribution is determined mainly by CNO for low metallicities (Fe/H of less than about -1), but mainly by opacity sources for high metallicities. The value of Fe/H where CNO ceases to dominate depends significantly on the adopted opacity and will decrease if and when opacity estimates are revised upward.

  3. Metal Preferences and Metallation*

    PubMed Central

    Foster, Andrew W.; Osman, Deenah; Robinson, Nigel J.

    2014-01-01

    The metal binding preferences of most metalloproteins do not match their metal requirements. Thus, metallation of an estimated 30% of metalloenzymes is aided by metal delivery systems, with ∼25% acquiring preassembled metal cofactors. The remaining ∼70% are presumed to compete for metals from buffered metal pools. Metallation is further aided by maintaining the relative concentrations of these pools as an inverse function of the stabilities of the respective metal complexes. For example, magnesium enzymes always prefer to bind zinc, and these metals dominate the metalloenzymes without metal delivery systems. Therefore, the buffered concentration of zinc is held at least a million-fold below magnesium inside most cells. PMID:25160626

  4. Vegetation survey of PEN Branch wetlands

    SciTech Connect

    Not Available

    1991-01-01

    A survey was conducted of vegetation along Pen Branch Creek at Savannah River Site (SRS) in support of K-Reactor restart. Plants were identified to species by overstory, understory, shrub, and groundcover strata. Abundance was also characterized and richness and diversity calculated. Based on woody species basal area, the Pen Branch delta was the most impacted, followed by the sections between the reactor and the delta. Species richness for shrub and groundcover strata were also lowest in the delta. No endangered plant species were found. Three upland pine areas were also sampled. In support of K Reactor restart, this report summarizes a study of the wetland vegetation along Pen Branch. Reactor effluent enters Indian Grove Branch and then flows into Pen Branch and the Pen Branch Delta.

  5. Research program of the Geodynamics Branch

    NASA Technical Reports Server (NTRS)

    Kahn, W. D. (Editor); Cohen, S. C. (Editor); Boccucci, B. S. (Editor)

    1986-01-01

    This report is the Fourth Annual Summary of the Research Program of the Geodynamics Branch. The branch is located within the Laboratory for Terrestrial Physics of the Space and Earth Sciences Directorate of the Goddard Space Flight Center. The research activities of the branch staff cover a broad spectrum of geoscience disciplines including: tectonophysics, space geodesy, geopotential field modeling, and dynamic oceanography. The NASA programs which are supported by the work described in this document include the Geodynamics and Ocean Programs, the Crustal Dynamics Project and the proposed Ocean Topography Experiment (TOPEX). The reports highlight the investigations conducted by the Geodynamics Branch staff during calendar year 1985. The individual papers are grouped into chapters on Crustal Movements and Solid Earth Dynamics, Gravity Field Modeling and Sensing Techniques, and Sea Surface Topography. Further information on the activities of the branch or the particular research efforts described herein can be obtained through the branch office or from individual staff members.

  6. Advanced Manufacturing Technologies

    NASA Technical Reports Server (NTRS)

    Fikes, John

    2016-01-01

    Advanced Manufacturing Technologies (AMT) is developing and maturing innovative and advanced manufacturing technologies that will enable more capable and lower-cost spacecraft, launch vehicles and infrastructure to enable exploration missions. The technologies will utilize cutting edge materials and emerging capabilities including metallic processes, additive manufacturing, composites, and digital manufacturing. The AMT project supports the National Manufacturing Initiative involving collaboration with other government agencies.

  7. Combining living anionic polymerization with branching reactions in an iterative fashion to design branched polymers.

    PubMed

    Higashihara, Tomoya; Sugiyama, Kenji; Yoo, Hee-Soo; Hayashi, Mayumi; Hirao, Akira

    2010-06-16

    This paper reviews the precise synthesis of many-armed and multi-compositional star-branched polymers, exact graft (co)polymers, and structurally well-defined dendrimer-like star-branched polymers, which are synthetically difficult, by a commonly-featured iterative methodology combining living anionic polymerization with branched reactions to design branched polymers. The methodology basically involves only two synthetic steps; (a) preparation of a polymeric building block corresponding to each branched polymer and (b) connection of the resulting building unit to another unit. The synthetic steps were repeated in a stepwise fashion several times to successively synthesize a series of well-defined target branched polymers.

  8. Toward improved branch prediction through data mining.

    SciTech Connect

    Hemmert, K. Scott; Johnson, D. Eric

    2009-09-01

    Data mining and machine learning techniques can be applied to computer system design to aid in optimizing design decisions, improving system runtime performance. Data mining techniques have been investigated in the context of branch prediction. Specifically, a comparison of traditional branch predictor performance has been made to data mining algorithms. Additionally, the possiblity of whether additional features available within the architectural state might serve to further improve branch prediction has been evaluated. Results show that data mining techniques indicate potential for improved branch prediction, especially when register file contents are included as a feature set.

  9. Branched silver nanowires as controllable plasmon routers.

    PubMed

    Fang, Yurui; Li, Zhipeng; Huang, Yingzhou; Zhang, Shunping; Nordlander, Peter; Halas, Naomi J; Xu, Hongxing

    2010-05-12

    Using polarization dependent scattering spectroscopy, we investigate plasmon propagation on branched silver nanowires. By controlling the polarization of the incident laser light, the wire plasmons can be routed into different wire branches and result in light emission from the corresponding wire ends. This routing behavior is found to be strongly dependent on the wavelength of light. Thus for certain incident polarizations, light of different wavelength will be routed into different branches. The branched nanowire can thus serve as a controllable router and multiplexer in integrated plasmonic circuits.

  10. Clinical and Translational Epidemiology Branch (CTEB)

    Cancer.gov

    The Clinical and Translational Epidemiology Branch focuses on factors that influence cancer progression, recurrence, survival, and other treatment outcomes, and factors associated with cancer development.

  11. Stochastic model for supersymmetric particle branching process

    NASA Astrophysics Data System (ADS)

    Zhang, Yuanyuan; Chan, Aik Hui; Oh, Choo Hiap

    2017-01-01

    We develop a stochastic branching model to describe the jet evolution of supersymmetric (SUSY) particles. This model is a modified two-phase branching process, or more precisely, a two-phase simple birth process plus Poisson process. Both pure SUSY partons initiated jets and SUSY plus ordinary partons initiated jets scenarios are considered. The stochastic branching equations are established and the Multiplicity Distributions (MDs) are derived for these two scenarios. We also fit the distribution of the general case (SUSY plus ordinary partons initiated jets) with experimental data. The fitting shows the SUSY particles have not participated in branching at current collision energy yet.

  12. Heavy Metals Resisting Gravity in White Dwarfs?

    NASA Astrophysics Data System (ADS)

    Rauch, T.; Gamrath, S.; Quinet, P.; Hoyer, D.; Werner, K.; Kruk, J. W.

    2017-03-01

    Spectral lines of heavy metals, identified in high-resolution ultraviolet spectra of the DO-type white dwarf RX J0503.9–2854 (RE 0503–289), allow precise abundance determinations of these species by means of advanced non-local thermodynamic equilibrium stellar-atmosphere models – provided that reliable atomic data is available. Such analyses of Zn (atomic number Z = 30), Ga (31), Ge (32), As (33), Mo (42), Kr (36), Zr (40), Xe (54), and Ba (56) have recently shown that, without exception, their abundances are unexpectedly strongly supersolar (up to about 5 dex). This is much higher than predicted by recent asymptotic giant branch nucleosynthesis calculations. Thus, the interplay of gravitational settling and radiative levitation may play an important role for their photospheric prominence.

  13. Metal-Air Batteries

    SciTech Connect

    Zhang, Jiguang; Bruce, Peter G.; Zhang, Gregory

    2011-08-01

    Metal-air batteries have much higher specific energies than most currently available primary and rechargeable batteries. Recent advances in electrode materials and electrolytes, as well as new designs on metal-air batteries, have attracted intensive effort in recent years, especially in the development of lithium-air batteries. The general principle in metal-air batteries will be reviewed in this chapter. The materials, preparation methods, and performances of metal-air batteries will be discussed. Two main metal-air batteries, Zn-air and Li-air batteries will be discussed in detail. Other type of metal-air batteries will also be described.

  14. Process for the conversion of lower alcohols to higher branched oxygenates

    DOEpatents

    Barger, Paul T.

    1996-01-01

    A process is provided for the production of branched C.sub.4+ oxygenates from lower alcohols such as methanol, ethanol, propanol and mixtures thereof. The process comprises contacting the lower alcohols with a solid catalyst comprising a mixed metal oxide support having components selected from the group consisting of oxides of zinc, magnesium, zirconia, titanium, manganese, chromium, and lanthanides, and an activation metal selected from the group consisting of Group VIII metal, Group IB metals, and mixtures thereof. The advantage of the process is improved yields and selectivity to isobutanol which can subsequently be employed in the production of high octane motor gasoline.

  15. Process for the conversion of lower alcohols to higher branched oxygenates

    DOEpatents

    Barger, P.T.

    1996-09-24

    A process is provided for the production of branched C{sub x} oxygenates from lower alcohols such as methanol, ethanol, propanol and mixtures thereof. The process comprises contacting the lower alcohols with a solid catalyst comprising a mixed metal oxide support having components selected from the group consisting of oxides of zinc, magnesium, zirconia, titanium, manganese, chromium, and lanthanides, and an activation metal selected from the group consisting of Group VIII metal, Group IB metals, and mixtures thereof. The advantage of the process is improved yields and selectivity to isobutanol which can subsequently be employed in the production of high octane motor gasoline.

  16. Salivary Gland Branching Morphogenesis — Recent Progress and Future Opportunities

    PubMed Central

    Hsu, Jeff Chi-feng; Yamada, Kenneth M

    2010-01-01

    Salivary glands provide saliva to maintain oral health, and a loss of salivary gland function substantially decreases quality-of-life. Understanding the biological mechanisms that generate salivary glands during embryonic development may identify novel ways to regenerate function or design artificial salivary glands. This review article summarizes current research on the process of branching morphogenesis of salivary glands, which creates gland structure during development. We highlight exciting new advances and opportunities in studies of cell-cell interactions, mechanical forces, growth factors, and gene expression patterns to improve our understanding of this important process. PMID:21125789

  17. Asymptotics of Simple Branching Populations

    NASA Astrophysics Data System (ADS)

    Huillet, Thierry; Kłopotowski, Andrzej; Porzio, Anna

    1995-09-01

    In this paper we study a simple deterministic tree structure: an initial individual generates a finite number of offspring, each of which has given integer valued lifetime, iterating the same procedure when dying. Three asymptotic distributions of this asynchronous deterministic branching procedure are considered: the generation distribution, the ability of individuals to generate offspring and the age distribution. Thermodynamic formalism is then developped to reveal the multifractal nature of the mass splitting associated to our process. On considère l'itération d'une structure déterministe arborescente selon laquelle un ancêtre engendre un nombre fini de descendants dont la durée de vie (à valeurs entières) est donnée. Dans un premier temps on s'intéresse aux trois distributions asymptotiques suivantes : répartition des générations, aptitude à engendrer des descendants et répartition selon l'âge. Ensuite nous développons le formalisme thermodynamique pour mettre en évidence le caractère multifractal de la scission d'une masse unitaire associée à cette arborescence.

  18. Pacific Coastal Ecology Branch: Research Overview

    EPA Science Inventory

    The Pacific Coastal Ecology Branch, Newport, Oregon is part of the Western Ecology Division of the National Health and Environmental Effects Research Laboratory of the U.S. EPA. The Branch conducts research and provides scientific technical support to Headquarters and Regional O...

  19. An archetypal mechanism for branching organogenesis.

    PubMed

    Clément, Raphaël; Mauroy, Benjamin

    2014-02-01

    Branched structures are ubiquitous in nature, both in living and non-living systems. While the functional benefits of branching organogenesis are straightforward, the developmental mechanisms leading to the repeated branching of epithelia in surrounding mesoderm remain unclear. Both molecular and physical aspects of growth control seem to play a critical role in shape emergence and maintenance. On the molecular side, the existence of a gradient of growth-promoting ligand between epithelial tips and distal mesenchyme seems to be common to branched organs. On the physical side, the branching process seems to require a mechanism of real-time adaptation to local geometry, as suggested by the self-avoiding nature of branching events. In this paper, we investigate the outcomes of a general three-dimensional growth model, in which epithelial growth is implemented as a function of ligand income, while the mesenchyme is considered as a proliferating viscous medium. Our results suggest that the existence of a gradient of growth-promoting ligand between distal and proximal mesenchyme implies a growth instability of the epithelial sheet, resulting in spontaneous self-avoiding branching morphogenesis. While the general nature of the model prevents one from fitting the development of specific organs, it suggests that few ingredients are actually required to achieve branching organogenesis.

  20. On an Integral with Two Branch Points

    ERIC Educational Resources Information Center

    de Oliveira, E. Capelas; Chiacchio, Ary O.

    2006-01-01

    The paper considers a class of real integrals performed by using a convenient integral in the complex plane. A complex integral containing a multi-valued function with two branch points is transformed into another integral containing a pole and a unique branch point. As a by-product we obtain a new class of integrals which can be calculated in a…

  1. Anaphora and Branching Direction in Japanese.

    ERIC Educational Resources Information Center

    O'Grady, William; And Others

    1994-01-01

    This paper constitutes a response to Lust and Mazuka's (1989) defense of the Principal Branching parameter and their critique of O'Grady, Suzuki-Wei, and Cho's (1986) experiment, which purported to show that even children learning left-branching languages exhibit a preference for forward patterns of anaphora. (Contains 16 references.) (JL)

  2. Suppression of branches in Eucalyptus trees.

    PubMed

    Senthalir, P; Sharanya, S; Paramathma, M

    2004-06-01

    The effect of neem oil, which acts as a suckericide in tobacco, on branch suppression in Eucalyptus tereticornis was assessed to help maximize stem biomass. Lateral branches of selected trees were pruned, and neem oil solutions at concentrations of either 80%, 40%, 20%, 10%, or 0% (untreated control) were applied to leaf axils of the pruned branches. Regeneration of branches was suppressed, and the magnitude of suppression was proportional to the concentration of neem oil. Compared to the control, the percentage reduction in branching at 80% neem oil was 41.6%. When regenerated branches were repruned and neem oil applied at either 100%, 80%, or 0% (control), the regenerating ability of these branches was severely repressed by 78% at 100% neem oil relative to the control. Apical shoots were also topped and treated at either 100% or 0% (control) neem oil to identify the principal suppressive component in neem oil. The principal component azadirachtin was tested at 375, 750, 1500, 3125, 6250, 12 500, 25 000, 50 000, and 100 000 ppm and 0 ppm as the control. Reduction in the coppicing shoot was as high as 85%. Azadirachtin was responsible for the suppression. By pruning the lateral branches with neem oil, wasteful consumption of photosynthates can be precluded and the stem biomass maximized.

  3. Branching out Has So Much to Offer

    ERIC Educational Resources Information Center

    Murray, Joe

    2012-01-01

    In 1989 there were thirty ATM branches nationally. In January 2012 there were just twelve ATM branches with another three "proposed". How can that happen? How did it happen? Maybe the most pertinent question is: Why did it happen? There is no single answer to the last question, but perhaps it was something to do with the changes that…

  4. Lung epithelial branching program antagonizes alveolar differentiation.

    PubMed

    Chang, Daniel R; Martinez Alanis, Denise; Miller, Rachel K; Ji, Hong; Akiyama, Haruhiko; McCrea, Pierre D; Chen, Jichao

    2013-11-05

    Mammalian organs, including the lung and kidney, often adopt a branched structure to achieve high efficiency and capacity of their physiological functions. Formation of a functional lung requires two developmental processes: branching morphogenesis, which builds a tree-like tubular network, and alveolar differentiation, which generates specialized epithelial cells for gas exchange. Much progress has been made to understand each of the two processes individually; however, it is not clear whether the two processes are coordinated and how they are deployed at the correct time and location. Here we show that an epithelial branching morphogenesis program antagonizes alveolar differentiation in the mouse lung. We find a negative correlation between branching morphogenesis and alveolar differentiation temporally, spatially, and evolutionarily. Gain-of-function experiments show that hyperactive small GTPase Kras expands the branching program and also suppresses molecular and cellular differentiation of alveolar cells. Loss-of-function experiments show that SRY-box containing gene 9 (Sox9) functions downstream of Fibroblast growth factor (Fgf)/Kras to promote branching and also suppresses premature initiation of alveolar differentiation. We thus propose that lung epithelial progenitors continuously balance between branching morphogenesis and alveolar differentiation, and such a balance is mediated by dual-function regulators, including Kras and Sox9. The resulting temporal delay of differentiation by the branching program may provide new insights to lung immaturity in preterm neonates and the increase in organ complexity during evolution.

  5. Polyphyly of true branching cyanobacteria (Stigonematales).

    PubMed

    Gugger, Muriel F; Hoffmann, Lucien

    2004-03-01

    Cyanobacteria with true branching are classified in Subsection V (formerly order Stigonematales) in the phylum CYANOBACTERIA: They exhibit a high degree of morphological complexity and are known from particular biotopes. Only a few stigonematalean morphotypes have been cultured, and therefore the high variability of morphotypes found in nature is under-represented in culture. Axenic cultures of Chlorogloeopsis and Fischerella sensu Rippka et al. were, to date, the only representatives of this Subsection in phylogenetic studies. The 16S rDNA sequence analysis data in this report confirm that heterocyst-forming cyanobacteria are a monophyletic group. However, unlike previous studies have suggested, these 16S rDNA data on new Stigonematales strains show that the true branching cyanobacteria are polyphyletic and can be separated into at least two major groups defined by their branching type, the first group being characterized by T-branching and the second group by Y-branching. Cyanobacteria with intercalary heterocysts and either no branching or false-branching also formed separate clusters. In consequence, our phylogenetic data do not correlate with the bacteriological and traditional classifications, which distinguish filamentous heterocystous cyanobacteria with or without true branching (Nostocales/Stigonematales).

  6. Phytochrome regulation of branching in Arabidopsis.

    PubMed

    Finlayson, Scott A; Krishnareddy, Srirama R; Kebrom, Tesfamichael H; Casal, Jorge J

    2010-04-01

    The red light:far-red light ratio perceived by phytochromes controls plastic traits of plant architecture, including branching. Despite the significance of branching for plant fitness and productivity, there is little quantitative and mechanistic information concerning phytochrome control of branching responses in Arabidopsis (Arabidopsis thaliana). Here, we show that in Arabidopsis, the negative effects of the phytochrome B mutation and of low red light:far-red light ratio on branching were largely due to reduced bud outgrowth capacity and an increased degree of correlative inhibition acting on the buds rather than due to a reduced number of leaves and buds available for branching. Phytochrome effects on the degree of correlative inhibition required functional BRANCHED1 (BRC1), BRC2, AXR1, MORE AXILLARY GROWTH2 (MAX2), and MAX4. The analysis of gene expression in selected buds indicated that BRC1 and BRC2 are part of different gene networks. The BRC1 network is linked to the growth capacity of specific buds, while the BRC2 network is associated with coordination of growth among branches. We conclude that the branching integrators BRC1 and BRC2 are necessary for responses to phytochrome, but they contribute differentially to these responses, likely acting through divergent pathways.

  7. Electron energy-loss spectroscopy of branched gap plasmon resonators

    PubMed Central

    Raza, Søren; Esfandyarpour, Majid; Koh, Ai Leen; Mortensen, N. Asger; Brongersma, Mark L.; Bozhevolnyi, Sergey I.

    2016-01-01

    The miniaturization of integrated optical circuits below the diffraction limit for high-speed manipulation of information is one of the cornerstones in plasmonics research. By coupling to surface plasmons supported on nanostructured metallic surfaces, light can be confined to the nanoscale, enabling the potential interface to electronic circuits. In particular, gap surface plasmons propagating in an air gap sandwiched between metal layers have shown extraordinary mode confinement with significant propagation length. In this work, we unveil the optical properties of gap surface plasmons in silver nanoslot structures with widths of only 25 nm. We fabricate linear, branched and cross-shaped nanoslot waveguide components, which all support resonances due to interference of counter-propagating gap plasmons. By exploiting the superior spatial resolution of a scanning transmission electron microscope combined with electron energy-loss spectroscopy, we experimentally show the propagation, bending and splitting of slot gap plasmons. PMID:27982030

  8. Electron energy-loss spectroscopy of branched gap plasmon resonators

    NASA Astrophysics Data System (ADS)

    Raza, Søren; Esfandyarpour, Majid; Koh, Ai Leen; Mortensen, N. Asger; Brongersma, Mark L.; Bozhevolnyi, Sergey I.

    2016-12-01

    The miniaturization of integrated optical circuits below the diffraction limit for high-speed manipulation of information is one of the cornerstones in plasmonics research. By coupling to surface plasmons supported on nanostructured metallic surfaces, light can be confined to the nanoscale, enabling the potential interface to electronic circuits. In particular, gap surface plasmons propagating in an air gap sandwiched between metal layers have shown extraordinary mode confinement with significant propagation length. In this work, we unveil the optical properties of gap surface plasmons in silver nanoslot structures with widths of only 25 nm. We fabricate linear, branched and cross-shaped nanoslot waveguide components, which all support resonances due to interference of counter-propagating gap plasmons. By exploiting the superior spatial resolution of a scanning transmission electron microscope combined with electron energy-loss spectroscopy, we experimentally show the propagation, bending and splitting of slot gap plasmons.

  9. Toward an understanding of fibrin branching structure

    NASA Astrophysics Data System (ADS)

    Fogelson, Aaron L.; Keener, James P.

    2010-05-01

    The blood clotting enzyme thrombin converts fibrinogen molecules into fibrin monomers which polymerize to form a fibrous three-dimensional gel. The concentration of thrombin affects the architecture of the resulting gel, in particular, a higher concentration of thrombin produces a gel with more branch points per unit volume and with shorter fiber segments between branch points. We propose a mechanism by which fibrin branching can occur and show that this mechanism can lead to dependence of the gel’s structure (at the time of gelation) on the rate at which monomer is supplied. A higher rate of monomer supply leads to a gel with a higher branch concentration and with shorter fiber segments between branch points. The origin of this dependence is explained.

  10. Using branching simulations in treatment fidelity plans.

    PubMed

    Kovach, Christine R; Rababa, Mohammad

    2014-01-01

    The purpose of this article is to present a new approach to treatment fidelity using branching simulations. Branching simulations are case scenarios that require the user to generate a series of step-by-step decisions and actions. The user is given immediate feedback on the consequences of his or her decisions and actions. Branching simulations may be a particularly useful fidelity strategy for interventions that require clinical decision making represented in terms of a flow of critical thinking and action steps. Results of fidelity testing in the current study using branching simulations revealed that 15 (22%) of 67 interventionists scored below the study's a priori 80% criterion for full retraining and retesting. Thirty (45%) interventionists needed partial retraining in using specific components of the intervention. Potential threats to internal validity posed by inadequate or erroneous adherence to multicomponent intervention protocols can be decreased through treatment fidelity using branching simulations.

  11. Root branching: mechanisms, robustness, and plasticity.

    PubMed

    Dastidar, Mouli Ghosh; Jouannet, Virginie; Maizel, Alexis

    2012-01-01

    Plants are sessile organisms that must efficiently exploit their habitat for water and nutrients. The degree of root branching impacts the efficiency of water uptake, acquisition of nutrients, and anchorage. The root system of plants is a dynamic structure whose architecture is determined by modulation of primary root growth and root branching. This plasticity relies on the continuous integration of environmental inputs and endogenous developmental programs controlling root branching. This review focuses on the cellular and molecular mechanisms involved in the regulation of lateral root distribution, initiation, and organogenesis with the main focus on the root system of Arabidopsis thaliana. We also examine the mechanisms linking environmental changes to the developmental pathways controlling root branching. Recent progress that emphasizes the parallels to the formation of root branches in other species is discussed.

  12. Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 1: Executive Summary, of a 15-Volume Set of Skills Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

    ERIC Educational Resources Information Center

    Texas State Technical Coll., Waco.

    The Machine Tool Advanced Skills Technology (MAST) consortium was formed to address the shortage of skilled workers for the machine tools and metals-related industries. Featuring six of the nation's leading advanced technology centers, the MAST consortium developed, tested, and disseminated industry-specific skill standards and model curricula for…

  13. Qualitative Macroinvertebrate Assessment of Crouch Branch, June 1999 and November 2000

    SciTech Connect

    Specht, W.L.

    2001-08-27

    Qualitative assessments of the macroinvertebrate community of Crouch Branch were performed in June 1999 and November 2000 to determine if effluent from the H-02 outfall is impairing the quality of the receiving stream. Concurrent samples were collected for metals analyses (copper and zinc in 1999; copper in 2000).

  14. Electrophoretic dynamics of self-assembling branched DNA structures

    NASA Astrophysics Data System (ADS)

    Heuer, Daniel Milton

    This study advances our understanding of the electrophoretic dynamics of branched biopolymers and explores technologies designed to exploit their unique properties. New self-assembly techniques were developed to create branched DNA for visualization via fluorescence microscopy. Experiments in fixed gel networks reveal a distinct trapping behavior, in contrast with linear topologies. The finding that detection can be achieved by introducing a branch point contributes significantly to the field of separation science and can be exploited to develop new applications. Results obtained in polymer solutions point to identical mobilities for branched and linear topologies, despite large differences in their dynamics. This finding led to a new description of electrophoresis based on non-Newtonian viscoelastic effects in the electric double layer surrounding a charged object. This new theoretical framework presents a new outlook important not only to the electrophoretic physics of nucleic acids, but all charged objects including proteins, colloids, and nanoparticles. To study the behavior of smaller biopolymers, such as restriction fragments and recombination intermediates, a library of symmetrically branched DNA was synthesized followed by characterization in gels. The experimental results contribute a large body of information relating molecular architecture and the dynamics of rigid structures in an electric field. The findings allow us to create new separation technologies based on topology. These contributions can also be utilized in a number of different applications including the study of recombination intermediates and the separation of proteins according to structure. To demonstrate the importance of these findings, a sequence and mutation detection technique was envisioned and applied for genetic analysis. Restriction fragments from mutation "hotspots" in the p53 tumor suppressor gene, known to play a role in cancer development, were analyzed with this technique

  15. Q-branch Raman scattering and modern kinetic thoery

    SciTech Connect

    Monchick, L.

    1993-12-01

    The program is an extension of previous APL work whose general aim was to calculate line shapes of nearly resonant isolated line transitions with solutions of a popular quantum kinetic equation-the Waldmann-Snider equation-using well known advanced solution techniques developed for the classical Boltzmann equation. The advanced techniques explored have been a BGK type approximation, which is termed the Generalized Hess Method (GHM), and conversion of the collision operator to a block diagonal matrix of symmetric collision kernels which then can be approximated by discrete ordinate methods. The latter method, which is termed the Collision Kernel method (CC), is capable of the highest accuracy and has been used quite successfully for Q-branch Raman scattering. The GHM method, not quite as accurate, is applicable over a wider range of pressures and has proven quite useful.

  16. Branched Macromolecular Architectures for Degradable, Multifunctional Phosphorus-Based Polymers.

    PubMed

    Henke, Helena; Brüggemann, Oliver; Teasdale, Ian

    2017-02-01

    This feature article briefly highlights some of the recent advances in polymers in which phosphorus is an integral part of the backbone, with a focus on the preparation of functional, highly branched, soluble polymers. A comparison is made between the related families of materials polyphosphazenes, phosphazene/phosphorus-based dendrimers and polyphosphoesters. The work described herein shows this to be a rich and burgeoning field, rapidly catching up with organic chemistry in terms of the macromolecular synthetic control and variety of available macromolecular architectures, whilst offering unique property combinations not available with carbon backbones, such as tunable degradation rates, high multi-valency and facile post-polymerization functionalization. As an example of their use in advanced applications, we highlight some investigations into their use as water-soluble drug carriers, whereby in particular the degradability in combination with multivalent nature has made them useful materials, as underlined by some of the recent studies in this area.

  17. Cast Reinforced Metal Composites: Proceedings of the International Symposium on Advances in Cast Reinforced Metal Composites Held in Conjunction with the 1988 World Materials Congress, Chicago, Illinois, USA, 24-30 September 1988

    DTIC Science & Technology

    1988-01-01

    Composites, Sheet Steels, Electronic Materials, Wear Resistance , ( Precipitation Phenomena, High Integrity Castings, Inclusions, HSLA Steels , _67 RACT...Integrity Castings1 4. Precipitation Phenomena: Deformation and Aging, 5. Wear Resistance of Metals and Alloys (over) w FORM I FOen4 7 31A EDTI"ON OF...and Processing 7 Corrosion- Resistant Automotive Sheet Steels. 8.’ Cast Reinforced Metal Composites SECURITY CLASSIFICATION OF THIS PAGE(Wh e n Ost

  18. Photo degradation of methyl orange an azo dye by advanced Fenton process using zero valent metallic iron: influence of various reaction parameters and its degradation mechanism.

    PubMed

    Gomathi Devi, L; Girish Kumar, S; Mohan Reddy, K; Munikrishnappa, C

    2009-05-30

    Advanced Fenton process (AFP) using zero valent metallic iron (ZVMI) is studied as a potential technique to degrade the azo dye in the aqueous medium. The influence of various reaction parameters like effect of iron dosage, concentration of H(2)O(2)/ammonium per sulfate (APS), initial dye concentration, effect of pH and the influence of radical scavenger are studied and optimum conditions are reported. The degradation rate decreased at higher iron dosages and also at higher oxidant concentrations due to the surface precipitation which deactivates the iron surface. The rate constant for the processes Fe(0)/UV and Fe(0)/APS/UV is twice compared to their respective Fe(0)/dark and Fe(0)/APS/dark processes. The rate constant for Fe(0)/H(2)O(2)/UV process is four times higher than Fe(0)/H(2)O(2)/dark process. The increase in the efficiency of Fe(0)/UV process is attributed to the cleavage of stable iron complexes which produces Fe(2+) ions that participates in cyclic Fenton mechanism for the generation of hydroxyl radicals. The increase in the efficiency of Fe(0)/APS/UV or H(2)O(2) compared to dark process is due to continuous generation of hydroxyl radicals and also due to the frequent photo reduction of Fe(3+) ions to Fe(2+) ions. Though H(2)O(2) is a better oxidant than APS in all respects, but it is more susceptible to deactivation by hydroxyl radical scavengers. The decrease in the rate constant in the presence of hydroxyl radical scavenger is more for H(2)O(2) than APS. Iron powder retains its recycling efficiency better in the presence of H(2)O(2) than APS. The decrease in the degradation rate in the presence of APS as an oxidant is due to the fact that generation of free radicals on iron surface is slower compared to H(2)O(2). Also, the excess acidity provided by APS retards the degradation rate as excess H(+) ions acts as hydroxyl radical scavenger. The degradation of Methyl Orange (MO) using Fe(0) is an acid driven process shows higher efficiency at pH 3. The

  19. Branch architecture, light interception and crown development in saplings of a plagiotropically branching tropical tree, Polyalthia jenkinsii (Annonaceae).

    PubMed

    Osada, Noriyuki; Takeda, Hiroshi

    2003-01-01

    To investigate crown development patterns, branch architecture, branch-level light interception, and leaf and branch dynamics were studied in saplings of a plagiotropically branching tree species, Polyalthia jenkinsii Hk. f. & Thoms. (Annonaceae) in a Malaysian rain forest. Lengths of branches and parts of the branches lacking leaves ('bare' branches) were smaller in upper branches than in lower branches within crowns, whereas lengths of 'leafy' parts and the number of leaves per branch were larger in intermediate than in upper and lower branches. Maximum diffuse light absorption (DLA) of individual leaves was not related to sapling height or branch position within crowns, whereas minimum DLA was lower in tall saplings. Accordingly, branch-level light interception was higher in intermediate than in upper and lower branches. The leaf production rate was higher and leaf loss rate was smaller in upper than in intermediate and lower branches. Moreover, the branch production rate of new first-order branches was larger in the upper crowns. Thus, leaf and branch dynamics do not correspond to branch-level light interception in the different canopy zones. As a result of architectural constraints, branches at different vertical positions experience predictable light microenvironments in plagiotropic species. Accordingly, this pattern of carbon allocation among branches might be particularly important for growth and crown development in plagiotropic species.

  20. Disassortativity of random critical branching trees.

    PubMed

    Kim, J S; Kahng, B; Kim, D

    2009-06-01

    Random critical branching trees (CBTs) are generated by the multiplicative branching process, where the branching number is determined stochastically, independent of the degree of their ancestor. Here we show analytically that despite this stochastic independence, there exists the degree-degree correlation (DDC) in the CBT and it is disassortative. Moreover, the skeletons of fractal networks, the maximum spanning trees formed by the edge betweenness centrality, behave similarly to the CBT in the DDC. This analytic solution and observation support the argument that the fractal scaling in complex networks originates from the disassortativity in the DDC.

  1. Chemoembolization Via Branches from the Splenic Artery in Patients with Hepatocellular Carcinoma

    SciTech Connect

    Choi, Jin Woo; Kim, Hyo-Cheol Chung, Jin Wook; Kim, Ji Dae; Kim, Gyoung Min; Lee, In Joon; Jae, Hwan Jun; Park, Jae Hyung

    2012-02-15

    Purpose: This study was designed to evaluate the radiologic findings and imaging response of chemoembolization via branches of the splenic artery in patients with hepatocellular carcinoma (HCC). Methods: From January 2001 to July 2010, we observed tumor staining supplied by branches of the splenic artery in 34 (0.6%) of 5,413 patients with HCC. Computed tomography (CT) scans and digital subtraction angiograms of these patients were retrospectively reviewed in consensus by two investigators. Results: A total of 39 tumor feeding-vessels in 34 patients were identified: omental branches from the left gastroepiploic artery (n = 5), branches from the short gastric artery (n = 9), and omental branches directly from the splenic artery (n = 25). Branches of the splenic artery that supplied tumors were revealed on the celiac angiogram in 29 (85%) of 34 patients and were detected on pre-procedure CT images in 27 (79%) of 34 patients. Selective chemoembolization was achieved in 38 of 39 tumor-feeding vessels. Complete or partial response of the tumor fed by branches of the splenic artery, as depicted on follow-up CT scans, was achieved in 21 (62%) patients. No patient developed severe complications directly related to chemoembolization via branches of the splenic artery. Conclusions: Omental branches directly from the splenic artery are common tumor-feeding vessels of the splenic artery in cases of advanced HCC with multiple previous chemoembolizations. Tumor-feeding vessels of the splenic artery are usually visualized on the celiac angiogram or CT scan, and chemoembolization through them can be safely performed in most patients.

  2. Endovascular Treatment of a Ruptured Profunda Femoral Artery Branch After Fogarty Thrombectomy of a Femoro-Femoral Crossover Arterial Graft: A Case Report and Review of the Literature

    SciTech Connect

    Manousaki, Eirini; Tsetis, Dimitrios; Kostas, Theodoros; Katsamouris, Asterios

    2010-02-15

    We present a very rare case of a life-threatening rupture of a profunda femoral artery distal branch after a Fogarty thrombectomy of a thrombosed crossover synthetic graft between the ipsilateral common femoral artery and a contralateral iliac-popliteal graft; the bleeding profunda femoral artery branch was successfully embolized with metallic coils through the axillary artery approach.

  3. Applied Aeroscience and CFD Branch Overview

    NASA Technical Reports Server (NTRS)

    LeBeau, Gerald J.; Kirk, Benjamin S.

    2014-01-01

    The principal mission of NASA Johnson Space Center is Human Spaceflight. In support of the mission the Applied Aeroscience and CFD Branch has several technical competencies that include aerodynamic characterization, aerothermodynamic heating, rarefied gas dynamics, and decelerator (parachute) systems.

  4. Sharing Fiscal Information: A Legislative Branch View.

    ERIC Educational Resources Information Center

    Rivlin, Alice M.

    1978-01-01

    Decisions regarding budget matters are complex; therefore, information sharing between the executive and legislative branches is helpful and necessary. Budget reforms have been initiated, but future trends indicate the need for flexibility and revision of information pathways. (MBR)

  5. Code 672 observational science branch computer networks

    NASA Technical Reports Server (NTRS)

    Hancock, D. W.; Shirk, H. G.

    1988-01-01

    In general, networking increases productivity due to the speed of transmission, easy access to remote computers, ability to share files, and increased availability of peripherals. Two different networks within the Observational Science Branch are described in detail.

  6. Residence times of branching diffusion processes

    NASA Astrophysics Data System (ADS)

    Dumonteil, E.; Mazzolo, A.

    2016-07-01

    The residence time of a branching Brownian process is the amount of time that the mother particle and all its descendants spend inside a domain. Using the Feynman-Kac formalism, we derive the residence-time equation as well as the equations for its moments for a branching diffusion process with an arbitrary number of descendants. This general approach is illustrated with simple examples in free space and in confined geometries where explicit formulas for the moments are obtained within the long time limit. In particular, we study in detail the influence of the branching mechanism on those moments. The present approach can also be applied to investigate other additive functionals of branching Brownian process.

  7. Soils of Walker Branch Watershed

    SciTech Connect

    Lietzke, D.A.

    1994-01-01

    The soil survey of Walker Branch Watershed (WBW) utilized the most up-to-date knowledge of soils, geology, and geohydrology in building the soils data base needed to reinterpret past research and to begin new research in the watershed. The soils of WBW were also compared with soils mapped elsewhere along Chestnut Ridge on the Oak Ridge Reservation to (1) establish whether knowledge obtained elsewhere could be used within the watershed, (2) determine whether there were any soils restricted to the watershed, and (3) evaluate geologic formation lateral variability. Soils, surficial geology, and geomorphology were mapped at a scale of 1:1200 using a paper base map having 2-ft contour intervals. Most of the contours seemed to reasonably represent actual landform configurations, except for dense wooded areas. For example, the very large dolines or sinkholes were shown on the contour base map, but numerous smaller ones were not. In addition, small drainageways and gullies were often not shown. These often small but important features were located approximately as soil mapping progressed. WBW is underlain by dolostones of the Knox Group, but only a very small part of the surface area contains outcroppings of rock and most outcrops were located in the lower part. Soil mapping revealed the presence of both ancient alluvium and ancient colluvium deposits, not recognized in previous soil surveys, that have been preserved in high-elevation stable portions of present-day landforms. An erosional geomorphic process of topographic inversion requiring several millions of years within the Pleistocene is necessary to bring about the degree of inversion that is expressed in the watershed. Indeed, some of these ancient alluvial and colluvial remnants may date back into the Tertiary. Also evident in the watershed, and preserved in the broad, nearly level bottoms of dolines, are multiple deposits of silty material either devoid or nearly devoid of coarse fragments. Recent research

  8. Rational growth of branched nanowire heterostructures with synthetically encoded properties and function

    PubMed Central

    Jiang, Xiaocheng; Tian, Bozhi; Xiang, Jie; Qian, Fang; Zheng, Gengfeng; Wang, Hongtao; Mai, Liqiang; Lieber, Charles M.

    2011-01-01

    Branched nanostructures represent unique, 3D building blocks for the “bottom-up” paradigm of nanoscale science and technology. Here, we report a rational, multistep approach toward the general synthesis of 3D branched nanowire (NW) heterostructures. Single-crystalline semiconductor, including groups IV, III–V, and II–VI, and metal branches have been selectively grown on core or core/shell NW backbones, with the composition, morphology, and doping of core (core/shell) NWs and branch NWs well controlled during synthesis. Measurements made on the different composition branched NW structures demonstrate encoding of functional p-type/n-type diodes and light-emitting diodes (LEDs) as well as field effect transistors with device function localized at the branch/backbone NW junctions. In addition, multibranch/backbone NW structures were synthesized and used to demonstrate capability to create addressable nanoscale LED arrays, logic circuits, and biological sensors. Our work demonstrates a previously undescribed level of structural and functional complexity in NW materials, and more generally, highlights the potential of bottom-up synthesis to yield increasingly complex functional systems in the future. PMID:21730174

  9. Title Sheet, National Home for Disabled Volunteer Soldiers, Northwestern Branch ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Title Sheet, National Home for Disabled Volunteer Soldiers, Northwestern Branch - National Home for Disabled Volunteer Soldiers, Northwestern Branch, 5000 West National Avenue, Milwaukee, Milwaukee County, WI

  10. Preparation and Analysis of Cyclodextrin-Based Metal-Organic Frameworks: Laboratory Experiments Adaptable for High School through Advanced Undergraduate Students

    ERIC Educational Resources Information Center

    Smith, Merry K.; Angle, Samantha R.; Northrop, Brian H.

    2015-01-01

    ?-Cyclodextrin can assemble in the presence of KOH or RbOH into metal-organic frameworks (CD-MOFs) with applications in gas adsorption and environmental remediation. Crystalline CD-MOFs are grown by vapor diffusion and their reversible adsorption of CO[subscript 2](g) is analyzed both qualitatively and quantitatively. The experiment can be…

  11. Direct metal laser sintering: a digitised metal casting technology.

    PubMed

    Venkatesh, K Vijay; Nandini, V Vidyashree

    2013-12-01

    Dental technology is undergoing advancements at a fast pace and technology is being imported from various other fields. One such imported technology is direct metal laser sintering technology for casting metal crowns. This article will discuss the process of laser sintering for making metal crowns and fixed partial dentures with a understanding of their pros and cons.

  12. High-Performance Corrosion-Resistant Materials: Iron-Based Amorphous-Metal Thermal-Spray Coatings: SAM HPCRM Program ? FY04 Annual Report ? Rev. 0 - DARPA DSO & DOE OCRWM Co-Sponsored Advanced Materials Program

    SciTech Connect

    Farmer, J; Haslam, J; Wong, F; Ji, S; Day, S; Branagan, D; Marshall, M; Meacham, B; Buffa, E; Blue, C; Rivard, J; Beardsley, M; Buffa, E; Blue, C; Rivard, J; Beardsley, M; Weaver, D; Aprigliano, L; Kohler, L; Bayles, R; Lemieux, E; Wolejsza, T; Martin, F; Yang, N; Lucadamo, G; Perepezko, J; Hildal, K; Kaufman, L; Heuer, A; Ernst, F; Michal, G; Kahn, H; Lavernia, E

    2007-09-19

    The multi-institutional High Performance Corrosion Resistant Materials (HPCRM) Team is cosponsored by the Defense Advanced Projects Agency (DARPA) Defense Science Office (DSO) and the Department of Energy (DOE) Office of Civilian Radioactive Waste Management (OCRWM), and has developed new corrosion-resistant, iron-based amorphous metals that can be applied as coatings with advanced thermal spray technology. Two compositions have corrosion resistance superior to wrought nickel-based Alloy C-22 (UNS No. N06022) in very aggressive environments, including concentrated calcium-chloride brines at elevated temperature. Corrosion costs the Department of Defense billions of dollars every year, with an immense quantity of material in various structures undergoing corrosion. For example, in addition to fluid and seawater piping, ballast tanks, and propulsions systems, approximately 345 million square feet of structure aboard naval ships and crafts require costly corrosion control measures. The use of advanced corrosion-resistant materials to prevent the continuous degradation of this massive surface area would be extremely beneficial. The Fe-based corrosion-resistant, amorphous-metal coatings under development may prove of importance for applications on ships. Such coatings could be used as an 'integral drip shield' on spent fuel containers, as well as protective coatings that could be applied over welds, thereby preventing exposure to environments that might cause stress corrosion cracking. In the future, such new high-performance iron-based materials could be substituted for more-expensive nickel-based alloys, thereby enabling a reduction in the $58-billion life cycle cost for the long-term storage of the Nation's spent nuclear fuel by tens of percent.

  13. Northwestern Branch of Mangala Vallis

    NASA Technical Reports Server (NTRS)

    2002-01-01

    (Released 12 June 2002) The Science One of the many branches of the Mangala Vallis channel system is seen in this image. The water that likely carved the channels emerged from a huge graben or fracture almost 1000 km to the south. The THEMIS image shows where one of the channels exits the cratered highlands terrain onto the lowland plains. A bright scarp marks the transition between the two terrain types and demonstrates that in this location the highlands terrain is being eroded back. Note how the floor of the main channel appears to be at the same level as the lowland terrain, suggestive of a base level where erosion is no longer effective. Most of the steep slope faces in the image display darker slope streaks that are thought to be dust avalanche scars and indicate that a relatively thick mantle of dust is present in this region. Wind-sculpted ridges known as yardangs cover many of the surfaces throughout the area as shown by images from the Mars Global Surveyor mission. Most of them are at the limit of resolution in the THEMIS image but some are evident on the floor of the main channel at the point at which a smaller side channel enters. In this location they appear to extend right up to the base of the channel wall, giving the appearance that they are emerging from underneath the thick pile of material into which the channel is eroded. This suggests a geologic history in which a preexisting landscape of eroded yardangs was covered over by a thick pile of younger material that is now eroding back down to the original level. Alternatively, it is possible that the yardangs formed more recently at the abrupt transition between the channel floor and wall. More analysis is necessary to sort out the story. The Story This channel system is named 'Mangala,' the word for Mars in Sanskrit, a language of the Hindus of India that goes back more than 4,000 years, with written literature almost as long. Great epic tales have been written in this language, and Odyssey is

  14. VizieR Online Data Catalog: Horizontal-branch and A-type star catalog. II (Beers+ 1996)

    NASA Astrophysics Data System (ADS)

    Beers, T. C.; Wilhelm, R.; Doinidis, S. P.; Mattson, C. J.

    1996-09-01

    We present coordinates and brightness estimates for 4175 candidate field horizontal-branch and A-type stars, in the magnitude range 10<=B<=15.5, selected using an objective-prism/interference-filter survey technique. The candidates lie primarily in the northern Galactic hemisphere and complement a previously published sample of southern Galactic hemisphere candidates. Available spectroscopy and photometry indicates that the great majority of the candidates are likely to be bona fide members of either the field blue horizontal- branch population or the blue, metal-deficient, high surface gravity stars referred to by Preston, Beers, & Schectman (1994AJ....108..538P) as BMP stars. The remaining stars in the catalog are likely to be a mix of metal-deficient turnoff stars, metallic-line (Am) stars, field red horizontal-branch stars, optical doubles with overlapping objective-prism spectra, and (particularly among the fainter candidates) inadvertently included late-type stars. (1 data file).

  15. Structure-Property Relationships for Branched Worm-Like Micelles

    NASA Astrophysics Data System (ADS)

    Beaucage, Gregory; Rai, Durgesh

    2013-03-01

    Micellar solutions can display a wide range of phase structure as a function of counter ion content, surfactant concentration, and the presence of ternary components. Under some conditions, common to consumer products, extended cylindrical structures that display persistence and other chain features of polymers are produced. These worm-like micelles (WLMs) can form branched structures that dynamically change under shear and even in quiescent conditions. The rheology of these branched WLMs is strongly dependent on migration of the branch points, and the dynamics of branch formation and removal. Persistence and other polymer-based descriptions are also of importance. We have recently developed a scattering model for branched polyolefins and other topologically complex materials that can quantify the branching density, branch length, branch functionality and the hyperbranch (branch-on-branch) content of polymers. This work is being extended to study branching in WLMs in work coupled with Ron Larson at UMich to predict rheological properties.

  16. Technical activities of the configuration aeroelasticity branch

    NASA Technical Reports Server (NTRS)

    Cole, Stanley R. (Editor)

    1991-01-01

    A number of recent technical activities of the Configuration Aeroelasticity Branch of the NASA Langley Research Center are discussed in detail. The information on the research branch is compiled in twelve separate papers. The first of these topics is a summary of the purpose of the branch, including a full description of the branch and its associated projects and program efforts. The next ten papers cover specific projects and are as follows: Experimental transonic flutter characteristics of supersonic cruise configurations; Aeroelastic effects of spoiler surfaces mounted on a low aspect ratio rectangular wing; Planform curvature effects on flutter of 56 degree swept wing determined in Transonic Dynamics Tunnel (TDT); An introduction to rotorcraft testing in TDT; Rotorcraft vibration reduction research at the TDT; A preliminary study to determine the effects of tip geometry on the flutter of aft swept wings; Aeroelastic models program; NACA 0012 pressure model and test plan; Investigation of the use of extension twist coupling in composite rotor blades; and Improved finite element methods for rotorcraft structures. The final paper describes the primary facility operation by the branch, the Langley TDT.

  17. Damping by branching: a bioinspiration from trees.

    PubMed

    Theckes, B; Langre, E de; Boutillon, X

    2011-12-01

    Man-made slender structures are known to be sensitive to high levels of vibration due to their flexibility which often cause irreversible damage. In nature, trees repeatedly endure large amplitudes of motion, mostly caused by strong climatic events, yet with minor or no damage in most cases. A new damping mechanism inspired by the architecture of trees is identified here and characterized in the simplest tree-like structure, a Y-shaped branched structure. Through analytical and numerical analyses of a simple two-degree-of-freedom model, branching is shown to be the key ingredient in this protective mechanism that we call damping-by-branching. It originates in the geometrical nonlinearities so that it is specifically efficient to damp out large amplitudes of motion. A more realistic model, using flexible beam approximation, shows that the mechanism is robust. Finally, two bioinspired architectures are analyzed, showing significant levels of damping achieved via branching with typically 30% of the energy being dissipated in one oscillation. This concept of damping-by-branching is of simple practical use in the design of very slender and flexible structures subjected to extreme dynamical loadings.

  18. Status of Transuranic Bearing Metallic Fuel Development

    SciTech Connect

    Steve Hayes; Bruce Hilton; Heather MacLean; Debbie Utterbeck; Jon Carmack; Kemal Pasamehmetoglu

    2009-09-01

    This paper summarizes the status of the metallic fuel development under the Advanced Fuel Cycle Initiative (AFCI). The metallic fuel development program includes fuel fabrication, characterization, advanced cladding research, irradiation testing and post-irradiation examination (PIE). The focus of this paper is on the recent irradiation experiments conducted in the Advanced Test Reactor and some PIE results from these tests.

  19. Qualitative Macroinvertebrate Assessment of Crouch Branch, June 1999

    SciTech Connect

    Specht, W.L.

    1999-11-05

    An assessment of the macroinvertebrate community of Crouch Branch was performed in June 1999 to determine if effluent from the H-02 outfall is impairing the quality of the stream. Concurrent samples were collected for metals analyses (copper and zinc). The results of the study indicate that the stream is most impaired just downstream from the H-02 outfall and that the quality of the stream biota improves with increasing distance from the outfall. Conversely, macroinvertebrate habitat quality is best just downstream from the H-02 outfall. The midreaches of the stream contain very poor habitat quality, and the lower reaches of the stream, contain habitat of intermediate quality. Although much of the stream has degraded habitat due to channel erosion and scouring, there is strong evidence to suggest that the impairment is due to elevated concentrations of copper and zinc that are present in the H-02 effluent. A comparison of macroinvertebrate data collected in 1997 to the data collected in this study indicates that the macroinvertebrate community of Crouch Branch has improved markedly in the last two years.

  20. The Future of Washington's Branch Campuses. HECB Report on Branch Campus Development Plans-HB 2707

    ERIC Educational Resources Information Center

    Washington Higher Education Coordinating Board, 2005

    2005-01-01

    Washington's research university branch campuses were created in 1989 to increase opportunities for students in several regions of the state to complete their baccalaureate and graduate-level studies at public universities close to their homes. Currently, the University of Washington operates branch campuses in Bothell and Tacoma. The Bothell…

  1. Comparing and distinguishing the structure of biological branching.

    PubMed

    Lamberton, Timothy O; Lefevre, James; Short, Kieran M; Smyth, Ian M; Hamilton, Nicholas A

    2015-01-21

    Bifurcating developmental branching morphogenesis gives rise to complex organs such as the lung and the ureteric tree of the kidney. However, a few quantitative methods or tools exist to compare and distinguish, at a structural level, the critical features of these important biological systems. Here we develop novel graph alignment techniques to quantify the structural differences of rooted bifurcating trees and demonstrate their application in the analysis of developing kidneys from in normal and mutant mice. We have developed two graph based metrics: graph discordance, which measures how well the graphs representing the branching structures of distinct trees graphs can be aligned or overlayed; and graph inclusion, which measures the degree of containment of a tree graph within another. To demonstrate the application of these approaches we first benchmark the discordance metric on a data set of 32 normal and 28Tgfβ(+/-) mutant mouse ureteric trees. We find that the discordance metric better distinguishes control and mutant mouse kidneys than alternative metrics based on graph size and fingerprints - the distribution of tip depths. Using this metric we then show that the structure of the mutant trees follows the same pattern as the normal kidneys, but undergo a major delay in elaboration at later stages. Analysis of both controls and mutants using the inclusion metric gives strong support to the hypothesis that ureteric tree growth is stereotypic. Additionally, we present a new generalised multi-tree alignment algorithm that minimises the sum of pairwise graph discordance and which can be used to generate maximum consensus trees that represent the archetype for fixed developmental stages. These tools represent an advance in the analysis and quantification of branching patterns and will be invaluable in gaining a deeper understanding of the mechanisms that drive development. All code is being made available with documentation and example data with this publication.

  2. Bioaccumulation and effects of metals and trace elements from aquatic disposal of coal combustion residues: recent advances and recommendations for further study.

    PubMed

    Rowe, Christopher L

    2014-07-01

    Advances have been made recently in assessing accumulation and effects of coal combustion residues (CCR). I provide a brief review of recent advancements, provide a tabulated summary of results of recent work, and put forth recommendations for future studies. One advancement is that mercury accumulation has begun to receive (limited) attention, whereas it had rarely been considered in the past. Additionally, some constituents of CCR have been shown to be accumulated by adults and transferred to offspring, sometimes compromising offspring health. Studies have demonstrated that amphibians, possessing complex life cycles, may accumulate and transfer some contaminants to terrestrial systems. Some study has been given to molecular and cellular effects of CCR exposure, although these studies have been limited to invertebrates. Population models have also been applied to CCR affected systems and have shown that CCR may affect animal populations under some conditions. In light of these advancements, there are several topics that require further assessment. First, more attention to Hg and its dynamics in CCR affected systems is warranted. Hg can be highly accumulative and toxic under some conditions and may interact with other components of CCR (notably Se), perhaps altering accumulation and effects of the contaminant mixtures. Second, further investigation of maternal transfer and effects of CCR contaminants need to be conducted. These studies could benefit from incorporation of quantitative models to project impacts on populations. Finally, more attention to the organic constituents of CCR (PAHs) is required, as a focus on inorganic compounds only may restrict our knowledge of contaminant dynamics and effects as a whole. While further studies will shed light on some chemical and biological nuances of exposure and effect, information available to date from numerous study sites implicates CCR as a bulk effluent that presents risks of bioaccumulation and effects on organisms

  3. PdCuPt Nanocrystals With Multi-branches for Enzyme-free Glucose Detection

    SciTech Connect

    Fu, Shaofang; Zhu, Chengzhou; Song, Junhua; Engelhard, Mark H.; Xia, Haibing; Du, Dan; Lin, Yuehe

    2016-08-05

    By carefully controlling the synthesis condition, branched PtCu bimetallic templates were synthesized in aqueous solution. After the galvanic replacement reaction between PtCu templates and the Pt precursors, PdCuPt trimetallic nanocrystals with branched structures were obtained. Owing to the open structure and the optimized composition, the electrochemical experimental results reveal that the PdCuPt trimetallic nanocrystals exhibit high electrocatalytic activity, selectivity and stability for the oxidation of glucose in alkaline solution. In details, a sensitivity of 378 μA/mM/cm2 and a detection limit of 1.29 μM can be achieved. The good electrocatalytic performance should be attributed to the unique branched nanostructure as well as the synergistic effect among metals. The superior catalytic properties suggest that these nanocrystals are promising for enzyme-free detection of glucose.

  4. Building Virtual Spaces for Children in the Digital Branch

    ERIC Educational Resources Information Center

    DuBroy, Michelle

    2010-01-01

    Purpose: A digital branch is just like a physical branch except that content is delivered digitally via the web. A digital branch has staff, a collection, a community, and a building. The purpose of this paper is to explore the concept of building individual spaces for different user groups, specifically children, within a digital branch.…

  5. Crack branching in carbon steel. Fracture mechanisms

    NASA Astrophysics Data System (ADS)

    Syromyatnikova, A. S.; Alekseev, A. A.; Levin, A. I.; Lyglaev, A. V.

    2010-04-01

    The fracture surfaces of pressure vessels made of carbon steel that form during crack branching propagation are examined by fractography. Crack branching is found to occur at a crack velocity higher than a certain critical value V > V c . In this case, the material volume that is involved in fracture and depends on the elastoplastic properties of the material and the sample width has no time to dissipate the energy released upon crack motion via the damage mechanisms intrinsic in the material under given deformation conditions (in our case, via cracking according to intragranular cleavage).

  6. Bayesian long branch attraction bias and corrections.

    PubMed

    Susko, Edward

    2015-03-01

    Previous work on the star-tree paradox has shown that Bayesian methods suffer from a long branch attraction bias. That work is extended to settings involving more taxa and partially resolved trees. The long branch attraction bias is confirmed to arise more broadly and an additional source of bias is found. A by-product of the analysis is methods that correct for biases toward particular topologies. The corrections can be easily calculated using existing Bayesian software. Posterior support for a set of two or more trees can thus be supplemented with corrected versions to cross-check or replace results. Simulations show the corrections to be highly effective.

  7. Branching model for vegetation. [polarimetric remote sensing

    NASA Technical Reports Server (NTRS)

    Yueh, Simon H.; Kong, J. A.; Jao, Jen K.; Shin, Robert T.; Le Toan, Thuy

    1992-01-01

    In the present branching model for remote sensing of vegetation, the frequency and angular responses of a two-scale cylinder cluster are calculated to illustrate the importance of vegetation architecture. Attention is given to the implementation of a two-scale branching model for soybeans, where the relative location of soybean plants is described by a pair of distribution functions. Theoretical backscattering coefficients evaluated by means of hole-correction pair distribution are in agreement with extensive data collected from soybean fields. The hole-correction approximation is found to be the more realistic.

  8. Strepsiptera, Phylogenomics and the Long Branch Attraction Problem

    PubMed Central

    Boussau, Bastien; Walton, Zaak; Delgado, Juan A.; Collantes, Francisco; Beani, Laura; Stewart, Isaac J.; Cameron, Sydney A.; Whitfield, James B.; Johnston, J. Spencer; Holland, Peter W.H.; Bachtrog, Doris; Kathirithamby, Jeyaraney; Huelsenbeck, John P.

    2014-01-01

    Insect phylogeny has recently been the focus of renewed interest as advances in sequencing techniques make it possible to rapidly generate large amounts of genomic or transcriptomic data for a species of interest. However, large numbers of markers are not sufficient to guarantee accurate phylogenetic reconstruction, and the choice of the model of sequence evolution as well as adequate taxonomic sampling are as important for phylogenomic studies as they are for single-gene phylogenies. Recently, the sequence of the genome of a strepsipteran has been published and used to place Strepsiptera as sister group to Coleoptera. However, this conclusion relied on a data set that did not include representatives of Neuropterida or of coleopteran lineages formerly proposed to be related to Strepsiptera. Furthermore, it did not use models that are robust against the long branch attraction artifact. Here we have sequenced the transcriptomes of seven key species to complete a data set comprising 36 species to study the higher level phylogeny of insects, with a particular focus on Neuropteroidea (Coleoptera, Strepsiptera, Neuropterida), especially on coleopteran taxa considered as potential close relatives of Strepsiptera. Using models robust against the long branch attraction artifact we find a highly resolved phylogeny that confirms the position of Strepsiptera as a sister group to Coleoptera, rather than as an internal clade of Coleoptera, and sheds new light onto the phylogeny of Neuropteroidea. PMID:25272037

  9. Colloidal nanocrystal heterostructures with linear and branched topology.

    PubMed

    Milliron, Delia J; Hughes, Steven M; Cui, Yi; Manna, Liberato; Li, Jingbo; Wang, Lin-Wang; Alivisatos, A Paul

    2004-07-08

    The development of colloidal quantum dots has led to practical applications of quantum confinement, such as in solution-processed solar cells, lasers and as biological labels. Further scientific and technological advances should be achievable if these colloidal quantum systems could be electronically coupled in a general way. For example, this was the case when it became possible to couple solid-state embedded quantum dots into quantum dot molecules. Similarly, the preparation of nanowires with linear alternating compositions--another form of coupled quantum dots--has led to the rapid development of single-nanowire light-emitting diodes and single-electron transistors. Current strategies to connect colloidal quantum dots use organic coupling agents, which suffer from limited control over coupling parameters and over the geometry and complexity of assemblies. Here we demonstrate a general approach for fabricating inorganically coupled colloidal quantum dots and rods, connected epitaxially at branched and linear junctions within single nanocrystals. We achieve control over branching and composition throughout the growth of nanocrystal heterostructures to independently tune the properties of each component and the nature of their interactions. Distinct dots and rods are coupled through potential barriers of tuneable height and width, and arranged in three-dimensional space at well-defined angles and distances. Such control allows investigation of potential applications ranging from quantum information processing to artificial photosynthesis.

  10. Lubricating bacteria model for branching growth of bacterial colonies

    NASA Astrophysics Data System (ADS)

    Kozlovsky, Yonathan; Cohen, Inon; Golding, Ido; Ben-Jacob, Eshel

    1999-06-01

    Various bacterial strains (e.g., strains belonging to the genera Bacillus, Paenibacillus, Serratia, and Salmonella) exhibit colonial branching patterns during growth on poor semisolid substrates. These patterns reflect the bacterial cooperative self-organization. A central part of the cooperation is the collective formation of a lubricant on top of the agar which enables the bacteria to swim. Hence it provides the colony means to advance towards the food. One method of modeling the colonial development is via coupled reaction-diffusion equations which describe the time evolution of the bacterial density and the concentrations of the relevant chemical fields. This idea has been pursued by a number of groups. Here we present an additional model which specifically includes an evolution equation for the lubricant excreted by the bacteria. We show that when the diffusion of the fluid is governed by a nonlinear diffusion coefficient, branching patterns evolve. We study the effect of the rates of emission and decomposition of the lubricant fluid on the observed patterns. The results are compared with experimental observations. We also include fields of chemotactic agents and food chemotaxis and conclude that these features are needed in order to explain the observations.

  11. Treatment of metal-laden hazardous wastes with advanced clean coal technology by-products. Quarterly report, December 30, 1996--March 30, 1997

    SciTech Connect

    1997-12-31

    The objective of this project is to utilize coal ashes to process hazardous materials such as industrial waste water treatment residues, contaminated soils, and air pollution control dusts from the metal industry and municipal waste incineration. This report describes the activities of the project team during the reporting period. The principal work has focused upon continuing evaluation of aged samples from Phase 1, planning supportive laboratory studies for Phase 2, completing scholarly work, reestablishing MAX Environmental Technologies, Inc., as the subcontractor for the field work of Phase 2, proposing two presentations for later in 1997, and making and responding to several outside contacts.

  12. Coated/Sandwiched rGO/CoSx Composites Derived from Metal-Organic Frameworks/GO as Advanced Anode Materials for Lithium-Ion Batteries.

    PubMed

    Yin, Dongming; Huang, Gang; Zhang, Feifei; Qin, Yuling; Na, Zhaolin; Wu, Yaoming; Wang, Limin

    2016-01-22

    Rational composite materials made from transition metal sulfides and reduced graphene oxide (rGO) are highly desirable for designing high-performance lithium-ion batteries (LIBs). Here, rGO-coated or sandwiched CoSx composites are fabricated through facile thermal sulfurization of metal-organic framework/GO precursors. By scrupulously changing the proportion of Co(2+) and organic ligands and the solvent of the reaction system, we can tune the forms of GO as either a coating or a supporting layer. Upon testing as anode materials for LIBs, the as-prepared CoSx -rGO-CoSx and rGO@CoSx composites demonstrate brilliant electrochemical performances such as high initial specific capacities of 1248 and 1320 mA h g(-1) , respectively, at a current density of 100 mA g(-1) , and stable cycling abilities of 670 and 613 mA h g(-1) , respectively, after 100 charge/discharge cycles, as well as superior rate capabilities. The excellent electrical conductivity and porous structure of the CoSx /rGO composites can promote Li(+) transfer and mitigate internal stress during the charge/discharge process, thus significantly improving the electrochemical performance of electrode materials.

  13. Genetic interactions underlying tree branch orientation

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Expanding our understanding of the molecular and genetic mechanisms behind branch orientation in trees both addresses a fundamental developmental phenomenon and can lead to significant impacts on tree crop agriculture and forestry. Using the p-nome (pooled genome) sequencing-based mapping approac...

  14. Academic Branch Libraries: Assessment and Collection Development

    ERIC Educational Resources Information Center

    Poole, Julie

    2009-01-01

    An ongoing project at Mercer University's Regional Academic Center Libraries illustrates how utilizing established assessment guidelines, stakeholder input, and a clear understanding of audience and curriculum needs may all be used to optimize a collection. Academic branch libraries often have clear collection development limitations in terms of…

  15. Characterization of branch complexity by fractal analyses

    USGS Publications Warehouse

    Alados, C.L.; Escos, J.; Emlen, J.M.; Freeman, D.C.

    1999-01-01

    The comparison between complexity in the sense of space occupancy (box-counting fractal dimension D(c) and information dimension D1) and heterogeneity in the sense of space distribution (average evenness index f and evenness variation coefficient J(cv)) were investigated in mathematical fractal objects and natural branch structures. In general, increased fractal dimension was paired with low heterogeneity. Comparisons between branch architecture in Anthyllis cytisoides under different slope exposure and grazing impact revealed that branches were more complex and more homogeneously distributed for plants on northern exposures than southern, while grazing had no impact during a wet year. Developmental instability was also investigated by the statistical noise of the allometric relation between internode length and node order. In conclusion, our study demonstrated that fractal dimension of branch structure can be used to analyze the structural organization of plants, especially if we consider not only fractal dimension but also shoot distribution within the canopy (lacunarity). These indexes together with developmental instability analyses are good indicators of growth responses to the environment.

  16. Detonation Structure Under Chain Branching Kinetics

    NASA Astrophysics Data System (ADS)

    Liang, Z.; Bauwens, L.

    2006-07-01

    Hydrogen-oxygen chemistry is characterized by a chain branching mechanism that yields three explosion limits. While a detailed kinetic scheme appropriate for hydrogen-oxygen should produce correct results, in many circumstances, a simpler yet reasonably realistic model will be warranted. In particular, it is easier to develop a clear understanding of the reaction zone structure using a simpler model, that includes only the key mechanisms. To that effect, we consider a four-step chain branching scheme that exhibits an explosion behavior with three limits, which behaves at least qualitatively like hydrogen chemistry. We focus in particular on the structure of the initiation and chain branching zones, using a combination between numerical simulation and analysis. Numerical simulations using this chemical model show distinctive keystone figures in the flow field, close to observations in hydrogen-oxygen detonation experiments. The structure of the chain branching zone is resolved using a perturbation analysis, which clarifies the differences between explosion and no-explosion regions and allows for an evaluation of the induction length in the steady wave. The analysis assumes both high activation energy and a slow initiation. Three cases are identified, respectively, with pressure and temperature located within the explosion region, close to the explosion limit and within the no-explosion region. The induction length is shorter and the reaction rate is faster by several orders of magnitude in the explosion region.

  17. 12 CFR 741.11 - Foreign branching.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    .... (b) Contents of Application. The application must include a business plan, written approval by the...) Contents of Business Plan. The written business plan must address the following: (1) Analysis of market... regional director may revoke approval of the branch office for failure to follow the business plan in...

  18. 12 CFR 741.11 - Foreign branching.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    .... (b) Contents of Application. The application must include a business plan, written approval by the...) Contents of Business Plan. The written business plan must address the following: (1) Analysis of market... regional director may revoke approval of the branch office for failure to follow the business plan in...

  19. Branching instability in expanding bacterial colonies

    PubMed Central

    Giverso, Chiara; Verani, Marco; Ciarletta, Pasquale

    2015-01-01

    Self-organization in developing living organisms relies on the capability of cells to duplicate and perform a collective motion inside the surrounding environment. Chemical and mechanical interactions coordinate such a cooperative behaviour, driving the dynamical evolution of the macroscopic system. In this work, we perform an analytical and computational analysis to study pattern formation during the spreading of an initially circular bacterial colony on a Petri dish. The continuous mathematical model addresses the growth and the chemotactic migration of the living monolayer, together with the diffusion and consumption of nutrients in the agar. The governing equations contain four dimensionless parameters, accounting for the interplay among the chemotactic response, the bacteria–substrate interaction and the experimental geometry. The spreading colony is found to be always linearly unstable to perturbations of the interface, whereas branching instability arises in finite-element numerical simulations. The typical length scales of such fingers, which align in the radial direction and later undergo further branching, are controlled by the size parameters of the problem, whereas the emergence of branching is favoured if the diffusion is dominant on the chemotaxis. The model is able to predict the experimental morphologies, confirming that compact (resp. branched) patterns arise for fast (resp. slow) expanding colonies. Such results, while providing new insights into pattern selection in bacterial colonies, may finally have important applications for designing controlled patterns. PMID:25652464

  20. Flat, Branched and Split Electrospun Fibers

    NASA Astrophysics Data System (ADS)

    Koombhongse, Sureeporn; Reneker, Darrell H.

    2001-03-01

    The electrospinning process uses electrical force to overcome the force from surface tension. As the electric field increases, the surface of a droplet becomes nearly conical and a charged jet flows from the vertex. The charged jet moves along a straight line for some distance and then begins a spiraling path, which is triggered by a bending instability.[1] The charged jet solidifies as it dries and electrospun nanofibers are collected. The electrospinning process normally produces cylindrical fibers, but sometimes the fibers are flat, branched or split. Flat fibers were electrospun from polystyrene (PS) and poly(2-hydroxyethyl methacrylate) (HEMA) solution. Flat fibers were formed by the collapse of a tube. Branched fibers of HEMA, PS and poly(vinylidene fluoride) were observed. The thinner branch was usually perpendicular to the axis of the primary jet. Branched fibers are formed by a smaller secondary jet ejected from the surface of the primary jet. The charged jet can split apart into two smaller jets to reduce the charge per unit surface area. Split fibers of HEMA, in which two smaller jets run parallel to the axis of the primary jet were observed. 1. D.H. Reneker, A.L. Yarin, H. Fong, and S. Koombhongse, J. Appl. Phys. 87, 4531 (2000).

  1. Tribology and Mechanical Components Branch Overview

    NASA Technical Reports Server (NTRS)

    Handschuh, Robert F.

    2010-01-01

    An overview of NASA Glenn Research Center's Tribology & Mechanical Components Branch is provided. Work in space mechanisms, seals, oil-free turbomachinery, and mechanical components is presented. An overview of current research for these technology areas is contained in this overview.

  2. Multicomponent Synthesis of α-Branched Amides

    PubMed Central

    DeBenedetto, Mikkel V.; Green, Michael E.; Wan, Shuangyi; Park, Jung-Hyun; Floreancig, Paul E.

    2009-01-01

    α-Branched amides are prepared by multicomponent reactions in which nitriles undergo hydrozirconation to form metalloimines that react with acyl chlorides. The resulting acylimines react with a variety of π-nucleophiles in the presence of Lewis acids to form the desired amides. PMID:19152262

  3. Laughter-induced left bundle branch block.

    PubMed

    Chow, Grant V; Desai, Dipan; Spragg, David D; Zakaria, Sammy

    2012-10-01

    We present the case of a patient with ischemic heart disease and intermittent left bundle branch block, reproducibly induced by laughter. Following treatment of ischemia with successful deployment of a drug-eluting stent, no further episodes of inducible LBBB were seen. Transient ischemia, exacerbated by elevated intrathoracic pressure during laughter, may have contributed to onset of this phenomenon.

  4. Re-Envisioning New York's Branch Libraries

    ERIC Educational Resources Information Center

    Giles, David; Estima, Jeanette; Francois, Noelle

    2014-01-01

    Nearly two years ago, the Center for an Urban Future published "Branches of Opportunity," a report documenting that New York City's public libraries have become more vital than ever, and are serving more New Yorkers in more ways than ever before. This new report provides an exhaustive analysis of the libraries' capital needs and offers a…

  5. The AFCRL Lunar amd Planetary Research Branch

    NASA Astrophysics Data System (ADS)

    Price, Stephan D.

    2011-07-01

    The Lunar and Planetary research program led by Dr John (Jack) Salisbury in the 1960s at the United States Air Force Cambridge Research Laboratories (AFCRL) investigated the surface characteristics of Solar System bodies. The Branch was one of the first groups to measure the infrared spectra of likely surface materials in the laboratory under appropriate vacuum and temperature conditions. The spectral atlases created from the results were then compared to photometric and spectral measurements obtained from ground- and balloon-based telescopes to infer the mineral compositions and physical conditions of the regoliths of the Moon, Mars and asteroids. Starting from scratch, the Branch initially sponsored observations of other groups while its in-house facilities were being constructed. The earliest contracted efforts include the spatially-resolved mapping of the Moon in the first half of the 1960s by Richard W. Shorthill and John W. Saari of the Boeing Scientific Research Laboratories in Seattle. This effort ultimately produced isophotal and isothermal contour maps of the Moon during a lunation and time-resolved thermal images of the eclipsed Moon. The Branch also sponsored probe rocket-based experiments flown by Riccardo Giacconi and his group at American Science and Engineering Inc. that produced the first observations of X-ray stars in 1962 and later the first interferometric measurement of the ozone and C02 emission in the upper atmosphere. The Branch also made early use of balloon-based measurements. This was a singular set of experiments, as these observations are among the very few mid-infrared astronomical measurements obtained from a balloon platform. Notable results of the AFCRL balloon flights were the mid-infrared spectra of the spatially-resolved Moon obtained with the University of Denver mid-infrared spectrometer on the Branch's balloon-borne 61-cm telescope during a 1968 flight. These observations remain among the best available. Salisbury also funded

  6. Abundance anomalies in hot horizontal-branch stars of the globular cluster NGC 6752

    SciTech Connect

    Glaspey, J.W.; Michaud, G.; Moffat, A.F.J.; Demers, S.

    1989-04-01

    High-resolution spectra of two blue stars on the horizontal branch of the metal-poor globular cluster NGC 6752 have been obtained with an echelle spectrograph and a CCD detector on the CTIO 4 m telescope. A helium underabundance is confirmed in the blue star CL 1083 (Teff = 16,000 K). An overabundance of iron by a factor of 50 compared to the cluster metallicity is also obtained. No abundance anomaly is measured in the cooler star CL 1007 (Teff = 10,000 K). Presumably all stars of this cluster had the same original abundances; hence, the anomalies must be explained by the different properties of individual stars. These results are discussed in the context of the diffusion model originally developed to explain the He underabundance in horizontal-branch stars. 47 refs.

  7. Expression and characterization of thermostable glycogen branching enzyme from Geobacillus mahadia Geo-05

    PubMed Central

    Mohtar, Nur Syazwani; Raja Abd Rahman, Raja Noor Zaliha; Leow, Thean Chor; Salleh, Abu Bakar; Mat Isa, Mohd Noor

    2016-01-01

    The glycogen branching enzyme (EC 2.4.1.18), which catalyses the formation of α-1,6-glycosidic branch points in glycogen structure, is often used to enhance the nutritional value and quality of food and beverages. In order to be applicable in industries, enzymes that are stable and active at high temperature are much desired. Using genome mining, the nucleotide sequence of the branching enzyme gene (glgB) was extracted from the Geobacillus mahadia Geo-05 genome sequence provided by the Malaysia Genome Institute. The size of the gene is 2013 bp, and the theoretical molecular weight of the protein is 78.43 kDa. The gene sequence was then used to predict the thermostability, function and the three dimensional structure of the enzyme. The gene was cloned and overexpressed in E. coli to verify the predicted result experimentally. The purified enzyme was used to study the effect of temperature and pH on enzyme activity and stability, and the inhibitory effect by metal ion on enzyme activity. This thermostable glycogen branching enzyme was found to be most active at 55 °C, and the half-life at 60 °C and 70 °C was 24 h and 5 h, respectively. From this research, a thermostable glycogen branching enzyme was successfully isolated from Geobacillus mahadia Geo-05 by genome mining together with molecular biology technique. PMID:27957389

  8. Silver nanocombs and branched nanowires formation in aqueous binary surfactants solution

    NASA Astrophysics Data System (ADS)

    Umar, Akrajas Ali; Oyama, Munetaka; Salleh, Muhamad Mat; Majlis, Burhanuddin Yeop

    2012-07-01

    Branched nanocrystals, particularly nanocombs, are a unique 1D-morphology that is normally formed in polytypic materials, such as ZnO, and rarely occurs in the highly symmetric fcc metallic system. Here, we report the chemical synthesis of nanocombs of a highly symmetrical fcc silver system that is realized by reducing the silver ions in the presence of a mixture of silver nanoseeds and binary surfactants, namely cetyltrimethylammonium bromide (CTAB) and hexamethylenetetramine (hexamine or HMT), under an alkaline condition. The silver nanocombs feature a high-degree branching orientation toward a single direction with good branch-to-branch spacing. The nanocombs formation was very sensitive to the concentrations of CTAB, HMT and NaOH in the reaction in which, in a typical case, nanocombs or curly nanowires were produced by controlling the concentration of these chemicals in the reaction. We hypothesized that the branching could be due to: (i) a kind of polytypism in such highly symmetrical fcc nanocrystals that was enabled by a selective surfactant adhesion process on the growing crystalline plane and (ii) lattice defects or twinning induced growth redirection in the nanocrystals. The silver nanocombs might generate a peculiar characteristic that is probably superior to those produced by other morphologies, such as nanorods, nanowires, and so on. Thus, it should find extensive use in the currently existing applications.

  9. Simulated herbivory advances autumn phenology in Acer rubrum.

    PubMed

    Forkner, Rebecca E

    2014-05-01

    To determine the degree to which herbivory contributes to phenotypic variation in autumn phenology for deciduous trees, red maple (Acer rubrum) branches were subjected to low and high levels of simulated herbivory and surveyed at the end of the season to assess abscission and degree of autumn coloration. Overall, branches with simulated herbivory abscised ∼7 % more leaves at each autumn survey date than did control branches within trees. While branches subjected to high levels of damage showed advanced phenology, abscission rates did not differ from those of undamaged branches within trees because heavy damage induced earlier leaf loss on adjacent branch nodes in this treatment. Damaged branches had greater proportions of leaf area colored than undamaged branches within trees, having twice the amount of leaf area colored at the onset of autumn and having ~16 % greater leaf area colored in late October when nearly all leaves were colored. When senescence was scored as the percent of all leaves abscised and/or colored, branches in both treatments reached peak senescence earlier than did control branches within trees: dates of 50 % senescence occurred 2.5 days earlier for low herbivory branches and 9.7 days earlier for branches with high levels of simulated damage. These advanced rates are of the same time length as reported delays in autumn senescence and advances in spring onset due to climate warming. Thus, results suggest that should insect damage increase as a consequence of climate change, it may offset a lengthening of leaf life spans in some tree species.

  10. Advance Liquid Metal Reactor Discrete Dynamic Event Tree/Bayesian Network Analysis and Incident Management Guidelines (Risk Management for Sodium Fast Reactors)

    SciTech Connect

    Denman, Matthew R.; Groth, Katrina M.; Cardoni, Jeffrey N.; Wheeler, Timothy A.

    2015-04-01

    Accident management is an important component to maintaining risk at acceptable levels for all complex systems, such as nuclear power plants. With the introduction of self-correcting, or inherently safe, reactor designs the focus has shifted from management by operators to allowing the system's design to manage the accident. Inherently and passively safe designs are laudable, but nonetheless extreme boundary conditions can interfere with the design attributes which facilitate inherent safety, thus resulting in unanticipated and undesirable end states. This report examines an inherently safe and small sodium fast reactor experiencing a beyond design basis seismic event with the intend of exploring two issues : (1) can human intervention either improve or worsen the potential end states and (2) can a Bayesian Network be constructed to infer the state of the reactor to inform (1). ACKNOWLEDGEMENTS The authors would like to acknowledge the U.S. Department of Energy's Office of Nuclear Energy for funding this research through Work Package SR-14SN100303 under the Advanced Reactor Concepts program. The authors also acknowledge the PRA teams at Argonne National Laboratory, Oak Ridge National Laboratory, and Idaho National Laboratory for their continue d contributions to the advanced reactor PRA mission area.

  11. Electrical communication in branching arterial networks.

    PubMed

    Tran, Cam Ha T; Vigmond, Edward J; Goldman, Daniel; Plane, France; Welsh, Donald G

    2012-09-15

    Electrical communication and its role in blood flow regulation are built on an examination of charge movement in single, isolated vessels. How this process behaves in broader arterial networks remains unclear. This study examined the nature of electrical communication in arterial structures where vessel length and branching were varied. Analysis began with the deployment of an existing computational model expanded to form a variable range of vessel structures. Initial simulations revealed that focal endothelial stimulation generated electrical responses that conducted robustly along short unbranched vessels and to a lesser degree lengthened arteries or branching structures retaining a single branch point. These predictions matched functional observations from hamster mesenteric arteries and support the idea that an increased number of vascular cells attenuate conduction by augmenting electrical load. Expanding the virtual network to 31 branches revealed that electrical responses increasingly ascended from fifth- to first-order arteries when the number of stimulated distal vessels rose. This property enabled the vascular network to grade vasodilation and network perfusion as revealed through blood flow modeling. An elevation in endothelial-endothelial coupling resistance, akin to those in sepsis models, compromised this ascension of vasomotor/perfusion responses. A comparable change was not observed when the endothelium was focally disrupted to mimic disease states including atherosclerosis. In closing, this study highlights that vessel length and branching play a role in setting the conduction of electrical phenomenon along resistance arteries and within networks. It also emphasizes that modest changes in endothelial function can, under certain scenarios, impinge on network responsiveness and blood flow control.

  12. Using Branch Prediction and Speculative Execution for Magnetospheric Data Assimilation

    NASA Astrophysics Data System (ADS)

    Doxas, I.; Lyon, J.

    2005-12-01

    Recent advances in the development of integrated models of the Sun-Earth environment are placing increasing emphasis on data assimilation schemes that can maximize the intelligence extracted from our sparse sampling of upwind conditions. Standard Kalman Filter techniques, widely used in tropospheric weather modeling, require significantly better coverage than is available upwind. To maximize the input of sparse upwind and magnetospheric data, and to reduce the forecast lead time computational penalty, we proposed to use Branch Prediction and Speculative Execution (BPSE) for data assimilation (Doxas and Horton,~2002). Branch Prediction and Speculative Execution consists of making probabilistic estimates of current upstream conditions, and distributing among available machines a large number of simulations that assume each of the probabilistically estimated states as initial conditions. As the near-Earth space evolves and near-Earth satellite data are compared with the models, some of the speculatively executed simulations will be seen to diverge from the observations more than others. At that point the machines that were executing them will be reassigned to new lines of speculative simulation, resulting in a continuous ensemble of runs that are in the neighborhood of the measured values. The scheme is particularly suited to Space Weather since our upwind early warning sentries can provide only sparse sampling of the incoming solar wind, while the bulk of our monitors, which can provide significantly better coverage, are located close to Earth and provide much shorter lead times. By the time the data come in from the near-Earth monitors, the forecasts of the speculative simulations are already in hand, reducing the lead time computational penalty (the portion of the lead time devoted to advancing the model) to almost zero. The scheme is similar to Ensemble Kalman Filters but is less reliant on dense data coverage, allows numerical models easier adherence to

  13. Tree branching: Leonardo da Vinci's rule versus biomechanical models.

    PubMed

    Minamino, Ryoko; Tateno, Masaki

    2014-01-01

    This study examined Leonardo da Vinci's rule (i.e., the sum of the cross-sectional area of all tree branches above a branching point at any height is equal to the cross-sectional area of the trunk or the branch immediately below the branching point) using simulations based on two biomechanical models: the uniform stress and elastic similarity models. Model calculations of the daughter/mother ratio (i.e., the ratio of the total cross-sectional area of the daughter branches to the cross-sectional area of the mother branch at the branching point) showed that both biomechanical models agreed with da Vinci's rule when the branching angles of daughter branches and the weights of lateral daughter branches were small; however, the models deviated from da Vinci's rule as the weights and/or the branching angles of lateral daughter branches increased. The calculated values of the two models were largely similar but differed in some ways. Field measurements of Fagus crenata and Abies homolepis also fit this trend, wherein models deviated from da Vinci's rule with increasing relative weights of lateral daughter branches. However, this deviation was small for a branching pattern in nature, where empirical measurements were taken under realistic measurement conditions; thus, da Vinci's rule did not critically contradict the biomechanical models in the case of real branching patterns, though the model calculations described the contradiction between da Vinci's rule and the biomechanical models. The field data for Fagus crenata fit the uniform stress model best, indicating that stress uniformity is the key constraint of branch morphology in Fagus crenata rather than elastic similarity or da Vinci's rule. On the other hand, mechanical constraints are not necessarily significant in the morphology of Abies homolepis branches, depending on the number of daughter branches. Rather, these branches were often in agreement with da Vinci's rule.

  14. Fatigue and Fracture Branch: A compendium of recently completed and on-going research projects

    NASA Technical Reports Server (NTRS)

    Elber, W.

    1984-01-01

    This compendium of recently completed and ongoing research projects from the Fatigue and Fracture Branch at NASA Langley Research Center provides technical descriptions and key results of all such projects expected to lead to publication of significant findings. The common thread to all these studies is the application of fracture mechanics analyses to engineering problems in metals and composites, with particular emphasis on airframe structural materials. References to recent publications are included where appropriate.

  15. How plastic can phenotypic plasticity be? The branching coral Stylophora pistillata as a model system.

    PubMed

    Shaish, Lee; Abelson, Avigdor; Rinkevich, Baruch

    2007-07-25

    Phenotypic plasticity enables multicellular organisms to adjust morphologies and various life history traits to variable environmental challenges. Here, we elucidate fixed and plastic architectural rules for colony astogeny in multiple types of colonial ramets, propagated by cutting from genets of the branching coral Stylophora pistillata from Eilat, the Red Sea. We examined 16 morphometric parameters on 136 one-year old S. pistillata colonies (of seven genotypes), originating from small fragments belonging, each, to one of three single-branch types (single tips, start-up, and advanced bifurcating tips) or to structural preparative manipulations (representing a single or two growth axes). Experiments were guided by the rationale that in colonial forms, complexity of evolving phenotypic plasticity can be associated with a degree of structural modularity, where shapes are approached by erecting iterative growth patterns at different levels of coral-colony organization. Analyses revealed plastic morphometric characters at branch level, and predetermined morphometric traits at colony level (only single trait exhibited plasticity under extreme manipulation state). Therefore, under the experimental manipulations of this study, phenotypic plasticity in S. pistillata appears to be related to branch level of organization, whereas colony traits are controlled by predetermined genetic architectural rules. Each level of organization undergoes its own mode of astogeny. However, depending on the original ramet structure, the spherical 3-D colonial architecture in this species is orchestrated and assembled by both developmental trajectories at the branch level, and traits at the colony level of organization. In nature, branching colonial forms are often subjected to harsh environmental conditions that cause fragmentation of colony into ramets of different sizes and structures. Developmental traits that are plastic, responding to fragment structure and are not predetermine in

  16. Structural changes of noble metal catalysts during ignition and extinction of the partial oxidation of methane studied by advanced QEXAFS techniques.

    PubMed

    Grunwaldt, Jan-Dierk; Beier, Matthias; Kimmerle, Bertram; Baiker, Alfons; Nachtegaal, Maarten; Griesebock, Bernd; Lützenkirchen-Hecht, Dirk; Stötzel, Jan; Frahm, Ronald

    2009-10-21

    The dynamics of the ignition and extinction of the catalytic partial oxidation (CPO) of methane to hydrogen and carbon monoxide over Pt-Rh/Al(2)O(3) and Pt/Al(2)O(3) were studied in the subsecond timescale using quick-EXAFS with a novel cam-driven X-ray monochromator employing Si(111) and Si(311) crystals. The experiments were performed under reaction conditions in a small fixed-bed capillary reactor. For the first time XAS data were taken with this QEXAFS technique with a Si(311) crystal that opens the energy range up to 35 keV. In addition, both XANES and EXAFS data are shown at the Pt L(3)-edge, allowing to discuss the potential and limitation of this technique in catalysis and related areas. With respect to the noble metal catalysed partial oxidation of methane, several interesting observations were made: structural changes during ignition were-independent of the chosen reaction conditions-significantly faster than during the extinction of the reaction. The dynamic behavior of the catalysts was dependent on the flow conditions and the respective noble metal component(s). Higher reaction gas flow led to a faster ignition process. While the ignition over Pt-Rh/Al(2)O(3) occurred at lower temperature than over Pt/Al(2)O(3), the structural changes during ignition were significantly faster in the latter case. The rate of reduction of the catalyst during ignition was also dependent on the axial position in the fixed-bed. The spectroscopic results provide important insight into the ignition and extinction behavior of the CPO of methane and are complementing results from time-resolved infrared thermography and full field X-ray microscopy studies.

  17. Photoinduced Acrylate Polymerization: Unexpected Reduction in Chain Branching.

    PubMed

    Wenn, Benjamin; Reekmans, Gunter; Adriaensens, Peter; Junkers, Thomas

    2015-08-01

    The branching stemming from midchain radical formation in n-butyl acrylate polymerization is investigated via melt-state (13) C NMR measurements. The dependence of the degree of branching (DB) on the monomer conversion of the system is examined for photoinduced polymerizations, revealing a steady increase in branching with conversion. For polymerization at moderate light intensities, an increase in branching from 0.03% to 0.37% is observed for polymerizations at 60 °C, which is fivefold below the level of branching observed in thermally initiated polymerizations under otherwise identical reaction conditions. The reason for this overall reduction in branching remains momentarily unclear; yet, a strong dependence of branching on light intensity is observed. While polymerization under a 1 W LED lamp results at almost full monomer conversion in branching degrees of 0.22%, polymerization under a 400 W lamp yields 1.81% of chain branches.

  18. [Research advances in dendrochronology].

    PubMed

    Fang, Ke-Yan; Chen, Qiu-Yan; Liu, Chang-Zhi; Cao, Chun-Fu; Chen, Ya-Jun; Zhou, Fei-Fei

    2014-07-01

    Tree-ring studies in China have achieved great advances since the 1990s, particularly for the dendroclimatological studies which have made some influence around the world. However, because of the uneven development, limited attention has been currently paid on the other branches of dendrochronology. We herein briefly compared the advances of dendrochronology in China and of the world and presented suggestions on future dendrochronological studies. Large-scale tree-ring based climate reconstructions in China are highly needed by employing mathematical methods and a high quality tree-ring network of the ring-width, density, stable isotope and wood anatomy. Tree-ring based field climate reconstructions provide potentials on explorations of climate forcings during the reconstructed periods via climate diagnosis and process simulation.

  19. Clinical considerations of the glandular branch of the lacrimal artery.

    PubMed

    Kluckman, Matthew; Fan, Jerry; Balsiger, Heather; Scott, Gabriel; Gest, Thomas

    2015-10-01

    The lacrimal artery is classically described as a branch of the ophthalmic artery supplied by the internal carotid. In this study, 25 orbits were dissected to identify variations in glandular branching and to compare them to previously published accounts. The glandular branching patterns of the lacrimal artery fall into two categories, those that branch (56%) and those that do not branch (44%). We found the medial and lateral glandular branches to be equal in diameter with a divergence of 2.67-40.58 mm proximal to the gland parenchyma. The long glandular branches run alongside the superolateral aspect of the orbit. The lateral branch runs lateral to the lateral rectus muscle. The medial branch runs superomedial to the lateral rectus muscle and lateral to the superior rectus muscle. In relation to the lacrimal gland, the medial branch enters the superior aspect of the gland parenchyma and the lateral branch enters its inferior aspect. The average branch lengths were 17.88 mm (medial) and 13.51 mm (lateral) as measured with a Mitutoyo Absolute 1/100 mm caliper. We could not confirm the existence of a third branch supplying the lacrimal gland, as posited by other authors. The key finding in this study is that the lacrimal gland is predominantly supplied by two significant arterial branches, both of which must be identified during procedures involving the lateral orbit.

  20. One-pot facile synthesis of branched Ag-ZnO heterojunction nanostructure as highly efficient photocatalytic catalyst

    NASA Astrophysics Data System (ADS)

    Huang, Qingli; Zhang, Qitao; Yuan, Saisai; Zhang, Yongcai; Zhang, Ming

    2015-10-01

    In this paper, the branched Ag-ZnO heterojunction nanostructure and the branched ZnO were synthesized successfully by a facile, green and one-pot hydrothermal method. Such branched heterojunction and the comparing branched pure ZnO were characterized by X-ray diffraction, field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM), energy-dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), photoluminescence spectroscopy (PL) and UV-vis diffuse reflectance spectra (DRS). The photocatalytic degradation of RhB aqueous solution and acetaldehyde (CH3CHO) gas results both showed that the branched Ag-ZnO heterojunction possessed the enhanced photocatalytic properties in comparison to the branched ZnO and Ag-ZnO counterparts due to its special interface structures and fast separation of its photogenerated charge carriers. This method is simple, feasible and can provide an important clue for synthesis and application of other branched metal/semiconductor heterojunction nanostructures.

  1. Advanced powder processing

    SciTech Connect

    Janney, M.A.

    1997-04-01

    Gelcasting is an advanced powder forming process. It is most commonly used to form ceramic or metal powders into complex, near-net shapes. Turbine rotors, gears, nozzles, and crucibles have been successfully gelcast in silicon nitride, alumina, nickel-based superalloy, and several steels. Gelcasting can also be used to make blanks that can be green machined to near-net shape and then high fired. Green machining has been successfully applied to both ceramic and metal gelcast blanks. Recently, the authors have used gelcasting to make tooling for metal casting applications. Most of the work has centered on H13 tool steel. They have demonstrated an ability to gelcast and sinter H13 to near net shape for metal casting tooling. Also, blanks of H13 have been cast, green machined into complex shape, and fired. Issues associated with forming, binder burnout, and sintering are addressed.

  2. Aquatics Systems Branch: transdisciplinary research to address water-related environmental problems

    USGS Publications Warehouse

    Dong, Quan; Walters, Katie D.

    2015-01-01

    The Aquatic Systems Branch at the Fort Collins Science Center is a group of scientists dedicated to advancing interdisciplinary science and providing science support to solve water-related environmental issues. Natural resource managers have an increasing need for scientific information and stakeholders face enormous challenges of increasing and competing demands for water. Our scientists are leaders in ecological flows, riparian ecology, hydroscape ecology, ecosystem management, and contaminant biology. The Aquatic Systems Branch employs and develops state-of-the-science approaches in field investigations, laboratory experiments, remote sensing, simulation and predictive modeling, and decision support tools. We use the aquatic experimental laboratory, the greenhouse, the botanical garden and other advanced facilities to conduct unique research. Our scientists pursue research on the ground, in the rivers, and in the skies, generating and testing hypotheses and collecting quantitative information to support planning and design in natural resource management and aquatic restoration.

  3. Masquerading bundle branch block: a variety of right bundle branch block with left anterior fascicular block.

    PubMed

    Elizari, Marcelo V; Baranchuk, Adrian; Chiale, Pablo A

    2013-01-01

    The so-called 'masquerading' type of right bundle branch block is caused by the simultaneous presence of a high-degree left anterior fascicular block often accompanied with severe left ventricular enlargement and/or fibrotic block in the anterolateral wall of the left ventricle. These conditions tend to reorient the terminal electrical forces of the QRS complex towards the left and upwards, in such a way that the characteristic slurred S wave in lead I becomes smaller or even disappears. In many cases of standard masquerading right bundle branch block, a small Q wave in lead I is present due to the initial forces of the left anterior fascicular block, which are oriented rightwards and inferiorly. However, in some cases, the Q wave in lead I also vanishes, and the mimicking of a left bundle branch block becomes perfect in standard leads. This is commonly associated with an inferior myocardial infarction or severe inferior fibrosis in cardiomyopathies. The typical QRS changes of right bundle branch block may eventually be concealed even in the right precordial leads; under such circumstances, the ECG diagnosis may be mistaken and the right bundle branch block totally missed. The masquerading right bundle branch block carries a poor prognosis, since it always implies the presence of a severe underlying heart disease.

  4. Advanced fuel chemistry for advanced engines.

    SciTech Connect

    Taatjes, Craig A.; Jusinski, Leonard E.; Zador, Judit; Fernandes, Ravi X.; Miller, James A.

    2009-09-01

    Autoignition chemistry is central to predictive modeling of many advanced engine designs that combine high efficiency and low inherent pollutant emissions. This chemistry, and especially its pressure dependence, is poorly known for fuels derived from heavy petroleum and for biofuels, both of which are becoming increasingly prominent in the nation's fuel stream. We have investigated the pressure dependence of key ignition reactions for a series of molecules representative of non-traditional and alternative fuels. These investigations combined experimental characterization of hydroxyl radical production in well-controlled photolytically initiated oxidation and a hybrid modeling strategy that linked detailed quantum chemistry and computational kinetics of critical reactions with rate-equation models of the global chemical system. Comprehensive mechanisms for autoignition generally ignore the pressure dependence of branching fractions in the important alkyl + O{sub 2} reaction systems; however we have demonstrated that pressure-dependent 'formally direct' pathways persist at in-cylinder pressures.

  5. Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 13: Laser Machining, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

    ERIC Educational Resources Information Center

    Texas State Technical Coll., Waco.

    This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

  6. Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 12: Instrumentation, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

    ERIC Educational Resources Information Center

    Texas State Technical Coll., Waco.

    This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

  7. Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 14: Automated Equipment Technician (CIM), of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

    ERIC Educational Resources Information Center

    Texas State Technical Coll., Waco.

    This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

  8. Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 3: Machining, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

    ERIC Educational Resources Information Center

    Texas State Technical Coll., Waco.

    This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

  9. Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 10: Computer-Aided Drafting & Design, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

    ERIC Educational Resources Information Center

    Texas State Technical Coll., Waco.

    This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

  10. Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 7: Industrial Maintenance Technology, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

    ERIC Educational Resources Information Center

    Texas State Technical Coll., Waco.

    This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

  11. Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 6: Welding, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

    ERIC Educational Resources Information Center

    Texas State Technical Coll., Waco.

    This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

  12. Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 5: Mold Making, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

    ERIC Educational Resources Information Center

    Texas State Technical Coll., Waco.

    This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational speciality areas within the U.S. machine tool and metals-related…

  13. Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 9: Tool and Die, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

    ERIC Educational Resources Information Center

    Texas State Technical Coll., Waco.

    This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

  14. Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 2: Career Development, General Education and Remediation, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

    ERIC Educational Resources Information Center

    Texas State Technical Coll., Waco.

    This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

  15. Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 4: Manufacturing Engineering Technology, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

    ERIC Educational Resources Information Center

    Texas State Technical Coll., Waco.

    This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

  16. Advanced Photoemission Spectroscopy Investigations Correlated with DFT Calculations on the Self-Assembly of 2D Metal Organic Frameworks Nano Thin Films.

    PubMed

    Elzein, Radwan; Chang, Chun-Min; Ponomareva, Inna; Gao, Wen-Yang; Ma, Shengqian; Schlaf, Rudy

    2016-11-16

    Metal-organic frameworks (MOFs) deposited from solution have the potential to form 2-dimensional supramolecular thin films suitable for molecular electronic applications. However, the main challenges lie in achieving selective attachment to the substrate surface, and the integration of organic conductive ligands into the MOF structure to achieve conductivity. The presented results demonstrate that photoemission spectroscopy combined with preparation in a system-attached glovebox can be used to characterize the electronic structure of such systems. The presented results demonstrate that porphyrin-based 2D MOF structures can be produced and that they exhibit similar electronic structure to that of corresponding conventional porphyrin thin films. Porphyrin MOF multilayer thin films were grown on Au substrates prefunctionalized with 4-mercaptopyridine (MP) via incubation in a glovebox, which was connected to an ultrahigh vacuum system outfitted with photoelectron spectroscopy. The thin film growth process was carried out in several sequential steps. In between individual steps the surface was characterized by photoemission spectroscopy to determine the valence bands and evaluate the growth mode of the film. A comprehensive evaluation of X-ray photoemission spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), and inverse photoemission spectroscopy (IPES) data was performed and correlated with density functional theory (DFT) calculations of the density of states (DOS) of the films involved to yield the molecular-level insights into the growth and the electronic properties of MOF-based 2D thin films.

  17. Pattern dependency in selective epitaxy of B-doped SiGe layers for advanced metal oxide semiconductor field effect transistors

    NASA Astrophysics Data System (ADS)

    Hâllstedt, J.; Kolahdouz, M.; Ghandi, R.; Radamson, H. H.; Wise, R.

    2008-03-01

    This study presents investigations about the physical mechanisms, origin, and methods to control the pattern dependency in selective epitaxial growth of Si1-xGex (x=0.14-0.32) layers. It is shown with a comprehensive experimental study that the local Si coverage of individual chips on patterned wafers is the main parameter for the layer profile in the epitaxial growth. This was explained by the gas depletion of the growth species in the low velocity boundary layer over the wafer. The gas depletion radius around each oxide opening was in the centimeter range which is related to the boundary layer thickness. The results from these experiments were applied to grow Si0.75Ge0.25 layers with B concentration of 4×1020cm-3 selectively for elevated source and drains in fully depleted ultrathin body silicon on insulator p metal oxide semiconductor field effect transistor (p-MOSFET) devices. The epitaxy control was maintained over a wide range of device sizes by optimized process parameters in combination with a wafer pattern design consisting of dummy features causing a uniform gas depletion over the chips on the wafer.

  18. Fort Collins Science Center Ecosystem Dynamics Branch

    USGS Publications Warehouse

    Wilson, Jim; Melcher, C.; Bowen, Z.

    2009-01-01

    Complex natural resource issues require understanding a web of interactions among ecosystem components that are (1) interdisciplinary, encompassing physical, chemical, and biological processes; (2) spatially complex, involving movements of animals, water, and airborne materials across a range of landscapes and jurisdictions; and (3) temporally complex, occurring over days, weeks, or years, sometimes involving response lags to alteration or exhibiting large natural variation. Scientists in the Ecosystem Dynamics Branch of the U.S. Geological Survey, Fort Collins Science Center, investigate a diversity of these complex natural resource questions at the landscape and systems levels. This Fact Sheet describes the work of the Ecosystems Dynamics Branch, which is focused on energy and land use, climate change and long-term integrated assessments, herbivore-ecosystem interactions, fire and post-fire restoration, and environmental flows and river restoration.

  19. Cost Reporting at a Navy Branch Clinic

    DTIC Science & Technology

    1993-03-01

    focusing on fundamental cost ingredients . D. EVALUATING ACTIVITIES An activity is a process or workload pattern that can be quantified. Once the...Field [Group ISubgroup Activity Based Costing, James Brimson, Navy Branch Medical Clinic, Full Cost I I - Reporting, Fixed and Variable Costs 19...model, costs are disaggregated into fixed and variable components. Using the Brimson approach, the thesis further explores the application of activity

  20. Polyatomic ions, branching ratios and hot molecules

    NASA Astrophysics Data System (ADS)

    Mitchell, J. Brian A.

    2015-01-01

    A discussion is given of the reason for the sharp fall-off observed in Dissociative Recombination (DR) cross sections above about 0.1 eV and of the need for accurate branching ratios being used in complex models of molecular ion chemistry. New measurements from TSR have shown that stored ions are not as cold as they were once thought to be and a new experiment facility is presented.

  1. Fabrication and characterization of branched carbon nanostructures.

    PubMed

    Malik, Sharali; Nemoto, Yoshihiro; Guo, Hongxuan; Ariga, Katsuhiko; Hill, Jonathan P

    2016-01-01

    Carbon nanotubes (CNTs) have atomically smooth surfaces and tend not to form covalent bonds with composite matrix materials. Thus, it is the magnitude of the CNT/fiber interfacial strength that limits the amount of nanomechanical interlocking when using conventional CNTs to improve the structural behavior of composite materials through reinforcement. This arises from two well-known, long standing problems in this research field: (a) inhomogeneous dispersion of the filler, which can lead to aggregation and (b) insufficient reinforcement arising from bonding interactions between the filler and the matrix. These dispersion and reinforcement issues could be addressed by using branched multiwalled carbon nanotubes (b-MWCNTs) as it is known that branched fibers can greatly enhance interfacial bonding and dispersability. Therefore, the use of b-MWCNTs would lead to improved mechanical performance and, in the case of conductive composites, improved electrical performance if the CNT filler was better dispersed and connected. This will provide major benefits to the existing commercial application of CNT-reinforced composites in electrostatic discharge materials (ESD): There would be also potential usage for energy conversion, e.g., in supercapacitors, solar cells and Li-ion batteries. However, the limited availability of b-MWCNTs has, to date, restricted their use in such technological applications. Herein, we report an inexpensive and simple method to fabricate large amounts of branched-MWCNTs, which opens the door to a multitude of possible applications.

  2. Measurement of tau lepton branching fractions

    SciTech Connect

    Nicol, Neil Allen

    1993-09-30

    We present τ- lepton branching fraction measurements based on data from the TPC/Two-Gamma detector at PEP. Using a sample of τ- → vτK-π+π- events, we examine the resonance structure of the K-π+π- system and obtain the first measurements of branching fractions for τ- → vτK$-\\atop{1}$(1270) and τ- → vτK$-\\atop{1}$(1400). We also describe a complete set of branching fraction measurements in which all the decays of the τ- lepton are separated into classes defined by the identities of the charged particles and an estimate of the number of neutrals. This is the first such global measurement with decay classes defined by the four possible charged particle species, e, μ, π, and K.

  3. Fabrication and characterization of branched carbon nanostructures

    PubMed Central

    Nemoto, Yoshihiro; Guo, Hongxuan; Ariga, Katsuhiko; Hill, Jonathan P

    2016-01-01

    Summary Carbon nanotubes (CNTs) have atomically smooth surfaces and tend not to form covalent bonds with composite matrix materials. Thus, it is the magnitude of the CNT/fiber interfacial strength that limits the amount of nanomechanical interlocking when using conventional CNTs to improve the structural behavior of composite materials through reinforcement. This arises from two well-known, long standing problems in this research field: (a) inhomogeneous dispersion of the filler, which can lead to aggregation and (b) insufficient reinforcement arising from bonding interactions between the filler and the matrix. These dispersion and reinforcement issues could be addressed by using branched multiwalled carbon nanotubes (b-MWCNTs) as it is known that branched fibers can greatly enhance interfacial bonding and dispersability. Therefore, the use of b-MWCNTs would lead to improved mechanical performance and, in the case of conductive composites, improved electrical performance if the CNT filler was better dispersed and connected. This will provide major benefits to the existing commercial application of CNT-reinforced composites in electrostatic discharge materials (ESD): There would be also potential usage for energy conversion, e.g., in supercapacitors, solar cells and Li-ion batteries. However, the limited availability of b-MWCNTs has, to date, restricted their use in such technological applications. Herein, we report an inexpensive and simple method to fabricate large amounts of branched-MWCNTs, which opens the door to a multitude of possible applications. PMID:27826499

  4. The root of branching river networks.

    PubMed

    Perron, J Taylor; Richardson, Paul W; Ferrier, Ken L; Lapôtre, Mathieu

    2012-12-06

    Branching river networks are one of the most widespread and recognizable features of Earth's landscapes and have also been discovered elsewhere in the Solar System. But the mechanisms that create these patterns and control their spatial scales are poorly understood. Theories based on probability or optimality have proven useful, but do not explain how river networks develop over time through erosion and sediment transport. Here we show that branching at the uppermost reaches of river networks is rooted in two coupled instabilities: first, valleys widen at the expense of their smaller neighbours, and second, side slopes of the widening valleys become susceptible to channel incision. Each instability occurs at a critical ratio of the characteristic timescales for soil transport and channel incision. Measurements from two field sites demonstrate that our theory correctly predicts the size of the smallest valleys with tributaries. We also show that the dominant control on the scale of landscape dissection in these sites is the strength of channel incision, which correlates with aridity and rock weakness, rather than the strength of soil transport. These results imply that the fine-scale structure of branching river networks is an organized signature of erosional mechanics, not a consequence of random topology.

  5. Remedial investigation report on Chestnut Ridge Operable Unit 2 (filled coal ash pond/Upper McCoy Branch) at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee. Volume 2: Appendixes

    SciTech Connect

    Not Available

    1994-08-01

    This report comprises appendices A--J which support the Y-12 Plant`s remedial action report involving Chestnut Ridge Operable Unit 2 (filled coal ash pond/Upper McCoy Branch). The appendices cover the following: Sampling fish from McCoy Branch; well and piezometer logs; ecological effects of contaminants in McCoy Branch 1989-1990; heavy metal bioaccumulation data; microbes in polluted sediments; and baseline human health risk assessment data.

  6. Progress report on the results of testing advanced conceptual design metal barrier materials under relevant environmental conditions for a tuff repository

    SciTech Connect

    McCright, R.D.; Halsey, W.G.; Van Konynenburg, R.A.

    1987-12-01

    This report discusses the performance of candidate metallic materials envisioned for fabricating waste package containers for long-term disposal at a possible geological repository at Yucca Mountain, Nevada. Candidate materials include austenitic iron-base to nickel-base alloy (AISI 304L, AISI 316L, and Alloy 825), high-purity copper (CDA 102), and copper-base alloys (CDA 613 and CDA 715). Possible degradation modes affecting these container materials are identified in the context of anticipated environmental conditions at the repository site. Low-temperature oxidation is the dominant degradation mode over most of the time period of concern (minimum of 300 yr to a maximum of 1000 yr after repository closure), but various forms of aqueous corrosion will occur when water infiltrates into the near-package environment. The results of three years of experimental work in different repository-relevant environments are presented. Much of the work was performed in water taken from Well J-13, located near the repository, and some of the experiments included gamma irradiation of the water or vapor environment. The influence of metallurgical effects on the corrosion and oxidation resistance of the material is reviewed; these effects result from container fabrication, welding, and long-term aging at moderately elevated temperatures in the repository. The report indicates the need for mechanisms to understand the physical/chemical reactions that determine the nature and rate of the different degradation modes, and the subsequent need for models based on these mechanisms for projecting the long-term performance of the container from comparatively short-term laboratory data. 91 refs., 17 figs., 16 tabs.

  7. Metallated metal-organic frameworks

    DOEpatents

    Bury, Wojciech; Farha, Omar K.; Hupp, Joseph T.; Mondloch, Joseph E.

    2017-02-07

    Porous metal-organic frameworks (MOFs) and metallated porous MOFs are provided. Also provided are methods of metallating porous MOFs using atomic layer deposition and methods of using the metallated MOFs as catalysts and in remediation applications.

  8. Auxin transport in the evolution of branching forms.

    PubMed

    Harrison, C Jill

    2016-11-24

    I. II. III. IV. V. VI. VII. Acknowledgements References SUMMARY: Branching is one of the most striking aspects of land plant architecture, affecting resource acquisition and yield. Polar auxin transport by PIN proteins is a primary determinant of flowering plant branching patterns regulating both branch initiation and branch outgrowth. Several lines of experimental evidence suggest that PIN-mediated polar auxin transport is a conserved regulator of branching in vascular plant sporophytes. However, the mechanisms of branching and auxin transport and relationships between the two are not well known outside the flowering plants, and the paradigm for PIN-regulated branching in flowering plants does not fit bryophyte gametophytes. The evidence reviewed here suggests that divergent auxin transport routes contributed to the diversification of branching forms in distinct land plant lineages.

  9. West Branch Pennsylvania Canal, Lock No. 34 Lock Keeper's House, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    West Branch Pennsylvania Canal, Lock No. 34 Lock Keeper's House, South of State Route 664 along North bank of West Branch of Susquehanna River, 2,000 feet East of Jay Street Bridge, Lock Haven, Clinton County, PA

  10. Hilbert Series and Mixed Branches of T [SU( N )] theories

    NASA Astrophysics Data System (ADS)

    Carta, Federico; Hayashi, Hirotaka

    2017-02-01

    We consider mixed branches of 3 d N = 4 T [SU( N )] theory. We compute the Hilbert series of the Coulomb branch part of the mixed branch from a restriction rule acting on the Hilbert series of the full Coulomb branch that will truncate the magnetic charge summation only to the subset of BPS dressed monopole operators that arise in the Coulomb branch sublocus where the mixed branch stems. This restriction can be understood directly from the type IIB brane picture by a relation between the magnetic charges of the monopoles and brane position moduli. We also apply the restriction rule to the Higgs branch part of a given mixed branch by exploiting 3d mirror symmetry. Both ccases show complete agreement with the results calculated by different methods.

  11. Detail view of bronze door. Note oak branches with acorns ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail view of bronze door. Note oak branches with acorns in the left panels and olive branches with olives in right. - Flanders Field American Cemetery & Memorial, Chapel, Wortegemseweg 117, Waregem, West Flanders (Belgium)

  12. Field Deployment for In-situ Metal and Radionuclide Stabilization by Microbial Metabolites

    SciTech Connect

    Turick, C. E.; Knox, A. S.; Dixon, K. L.; Roseberry, R. J.; Kritzas, Y. G

    2005-09-26

    A novel biotechnology is reported here that was demonstrated at SRS that facilitates metal and actinide immobilization by incorporating the physiology and ecology of indigenous bacteria. This technology is based on our previous work with pyomelanin-producing bacteria isolated from SRS soils. Through tyrosine supplementation, overproduction of pyomelanin was achieved, which lead ultimately to metal and actinide immobilization, both in-vitro and in-situ. Pyomelanin is a recalcitrant microbial pigment and a humic type compound in the class of melanin pigments. Pyomelanin has electron shuttling and metal chelation capabilities and thus accelerates the bacterial reduction and/or immobilization of metals. Pyomelanin is produced outside the cell and either diffuses away or attaches to the cell surface. In either case, the reduced pyomelanin is capable of transferring electrons to metals as well as chelating metals. Because of its recalcitrance and redox cycling properties, pyomelanin molecules can be used over and over again for metal transformation. When produced in excess, pyomelanin produced by one bacterial species can be used by other species for metal reduction, thereby extending the utility of pyomelanin and further accelerating metal immobilization rates. Soils contaminated with Ni and U were the focus of this study in order to develop in-situ, metal bioimmobilization technologies. We have demonstrated pyomelanin production in soil from the Tims Branch area of SRS as a result of tyrosine amendments. These results were documented in laboratory soil column studies and field deployment studies. The amended soils demonstrated increased redox behavior and sequestration capacity of U and transition metals following pyomelanin production. Treatments incorporating tyrosine and lactate demonstrated the highest levels of pyomelanin production. In order to determine the potential use of this technology at other areas of SRS, pyomelanin producing bacteria were also quantified

  13. Advances by the Integral Fast Reactor Program

    SciTech Connect

    Lineberry, M.J.; Pedersen, D.R.; Walters, L.C.; Cahalan, J.E.

    1991-01-01

    The advances by the Integral Fast Reactor Program at Argonne National Laboratory are the subject of this paper. The Integral Fast Reactor (IFR) is an advanced liquid-metal-cooled reactor concept being developed at Argonne National Laboratory. The advances stressed in the paper include fuel irradiation performance, improved passive safety, and the development of a prototype fuel cycle facility. 14 refs.

  14. An information-theoretic look at branch-prediction

    SciTech Connect

    Ponder, C.G. ); Shebanow, M.C. )

    1990-09-11

    Accurate branch-prediction is necessary to utilize deeply pipelined and Very Long Instruction-Word (VLIW) architectures. For a set of program traces we show the upper limits on branch predictability, and hence machine utilization, for important classes of branch-predictors using static (compiletime) and dynamic (runtime) program information. A set of optimal superpredictors'' is derived from these program traces. These optimal predictors compare favorably with other proposed methods of branch-prediction. 3 refs., 5 figs., 12 tabs.

  15. Noble metal alloy complex nanostructures: controllable synthesis and their electrochemical property.

    PubMed

    Liu, Hui-ling; Nosheen, Farhat; Wang, Xun

    2015-05-21

    Noble metal nanocrystals have been extensively utilized as promising catalysts for chemical transformations and energy conversion. One of their significant applications lies in electrode materials in fuel cells (FCs) due to their superior electrocatalytic performance towards the reactions both on anode and cathode. Nowadays, tremendous efforts have been devoted to improve the catalytic performance and minimize the usage of precious metals. Constructing multicomponent noble metal nanocrystals with complex structures provides the opportunity to reach this goal due to their highly tunable compositions and morphologies, leading to the modification of the related electrochemical properties. In this review, we first highlight the recent advances in the controllable synthesis of noble metal alloy complex nanostructures including nanoframes/nanocages, branched structures, concave/convex structures, core-shell structures and ultrathin structures. Then the effects of the well-defined nanocrystals on the modified and improved electrochemical properties are outlined. Finally, we make a conclusion with the points on the challenges and perspectives of the controllable synthesis of noble metal alloy complex nanostructures and their electrocatalytic performance.

  16. Multidisciplinary Optimization Branch Experience Using iSIGHT Software

    NASA Technical Reports Server (NTRS)

    Padula, S. L.; Korte, J. J.; Dunn, H. J.; Salas, A. O.

    1999-01-01

    The Multidisciplinary Optimization (MDO) Branch at NASA Langley Research Center is investigating frameworks for supporting multidisciplinary analysis and optimization research. An optimization framework call improve the design process while reducing time and costs. A framework provides software and system services to integrate computational tasks and allows the researcher to concentrate more on the application and less on the programming details. A framework also provides a common working environment and a full range of optimization tools, and so increases the productivity of multidisciplinary research teams. Finally, a framework enables staff members to develop applications for use by disciplinary experts in other organizations. Since the release of version 4.0, the MDO Branch has gained experience with the iSIGHT framework developed by Engineous Software, Inc. This paper describes experiences with four aerospace applications: (1) reusable launch vehicle sizing, (2) aerospike nozzle design, (3) low-noise rotorcraft trajectories, and (4) acoustic liner design. All applications have been successfully tested using the iSIGHT framework, except for the aerospike nozzle problem, which is in progress. Brief overviews of each problem are provided. The problem descriptions include the number and type of disciplinary codes, as well as all estimate of the multidisciplinary analysis execution time. In addition, the optimization methods, objective functions, design variables, and design constraints are described for each problem. Discussions on the experience gained and lessons learned are provided for each problem. These discussions include the advantages and disadvantages of using the iSIGHT framework for each case as well as the ease of use of various advanced features. Potential areas of improvement are identified.

  17. 26 CFR 1.884-1 - Branch profits tax.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 9 2010-04-01 2010-04-01 false Branch profits tax. 1.884-1 Section 1.884-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Foreign Corporations § 1.884-1 Branch profits tax. (a) General rule. A foreign corporation shall be liable for a branch profits tax...

  18. 46 CFR 169.733 - Fire extinguishing branch lines.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Fire extinguishing branch lines. 169.733 Section 169.733... Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.733 Fire extinguishing branch lines. Each branch line valve of every fire extinguishing system must be plainly and permanently...

  19. Structural dynamics branch research and accomplishments for fiscal year 1987

    NASA Technical Reports Server (NTRS)

    1988-01-01

    This publication contains a collection of fiscal year 1987 research highlights from the Structural Dynamics Branch at NASA Lewis Research Center. Highlights from the branch's four major work areas, Aeroelasticity, Vibration Control, Dynamic Systems, and Computational Structural Methods, are included in the report as well as a complete listing of the FY87 branch publications.

  20. 40 CFR 721.3627 - Branched synthetic fatty acid.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Branched synthetic fatty acid. 721... Substances § 721.3627 Branched synthetic fatty acid. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as a branched synthetic fatty...