Science.gov

Sample records for advantageous mechanical properties

  1. Comparative advantages of mechanical biosensors

    PubMed Central

    Arlett, J.L.; Myers, E.B.; Roukes, M.L.

    2013-01-01

    Mechanical interactions are fundamental to biology. Mechanical forces of chemical origin determine motility and adhesion on the cellular scale, and govern transport and affinity on the molecular scale. Biological sensing in the mechanical domain provides unique opportunities to measure forces, displacements and mass changes from cellular and subcellular processes. Nanomechanical systems are particularly well matched in size with molecular interactions, and provide a basis for biological probes with single-molecule sensitivity. Here we review micro- and nanoscale biosensors, with a particular focus on fast mechanical biosensing in fluid by mass- and force-based methods, and the challenges presented by non-specific interactions. We explain the general issues that will be critical to the success of any type of next-generation mechanical biosensor, such as the need to improve intrinsic device performance, fabrication reproducibility and system integration. We also discuss the need for a greater understanding of analyte–sensor interactions on the nanoscale and of stochastic processes in the sensing environment. PMID:21441911

  2. A memory advantage for property.

    PubMed

    DeScioli, Peter; Rosa, Nicole M; Gutchess, Angela H

    2015-01-01

    People's access to resources depends on their status as the owner of particular items. To respect property, people need to remember who owns which objects. We test the hypothesis that people possess enhanced memory for ownership relations compared to unrelated objects. Participants viewed a sequence of 10 person-object pairs before completing a surprise associative memory test in which they matched each person with the previously paired object. We varied the description of the person-object pairs in the instructions. Across three experiments, participants showed better recall when the person was described as the owner of the object compared to being unrelated. Furthermore, memory for property was better than a physical relation (bumping), whereas it did not differ from mental relations (wanting and thinking). These patterns were observed both for memory of items (Experiments 1 and 2) and perceptual details (Experiment 3). We discuss implications for how people remember other people's property. PMID:25986536

  3. The mechanical defence advantage of small seeds.

    PubMed

    Fricke, Evan C; Wright, S Joseph

    2016-08-01

    Seed size and toughness affect seed predators, and size-dependent investment in mechanical defence could affect relationships between seed size and predation. We tested how seed toughness and mechanical defence traits (tissue density and protective tissue content) are related to seed size among tropical forest species. Absolute toughness increased with seed size. However, smaller seeds had higher specific toughness both within and among species, with the smallest seeds requiring over 2000 times more energy per gram to break than the largest seeds. Investment in mechanical defence traits varied widely but independently of the toughness-mass allometry. Instead, a physical scaling relationship confers a toughness advantage on small seeds independent of selection on defence traits and without a direct cost. This scaling relationship may contribute to seed size diversity by decreasing fitness differences among large and small seeds. Allometric scaling of toughness reconciles predictions and conflicting empirical relationships between seed size and predation. PMID:27324185

  4. Elasticity and Mechanical Advantage in Cables and Ropes

    ERIC Educational Resources Information Center

    O'Shea, M. J.

    2007-01-01

    Abstract. The conditions under which one can gain mechanical advantage by pulling with a force F perpendicular to a cable (or rope) that is fixed at both ends are examined. While this is a commonly discussed example in introductory physics classes, its solution in terms of fundamental properties of the cable requires one to model the elasticity of…

  5. Releasable High-Mechanical-Advantage Linear Actuator

    NASA Technical Reports Server (NTRS)

    Young, Gordon H.

    1994-01-01

    Proposed linear actuator includes ball-screw mechanism made to engage or disengage piston as needed. Requires low power to maintain release and no power to maintain engagement. Pins sliding radially in solenoids in yoke engage or disengage slot in piston. With help of optoelectronic feedback, yoke made to follow free piston during disengagement so always in position to "grab" piston.

  6. Are Articulatory Settings Mechanically Advantageous for Speech Motor Control?

    PubMed Central

    Ramanarayanan, Vikram; Lammert, Adam; Goldstein, Louis; Narayanan, Shrikanth

    2014-01-01

    We address the hypothesis that postures adopted during grammatical pauses in speech production are more “mechanically advantageous” than absolute rest positions for facilitating efficient postural motor control of vocal tract articulators. We quantify vocal tract posture corresponding to inter-speech pauses, absolute rest intervals as well as vowel and consonant intervals using automated analysis of video captured with real-time magnetic resonance imaging during production of read and spontaneous speech by 5 healthy speakers of American English. We then use locally-weighted linear regression to estimate the articulatory forward map from low-level articulator variables to high-level task/goal variables for these postures. We quantify the overall magnitude of the first derivative of the forward map as a measure of mechanical advantage. We find that postures assumed during grammatical pauses in speech as well as speech-ready postures are significantly more mechanically advantageous than postures assumed during absolute rest. Further, these postures represent empirical extremes of mechanical advantage, between which lie the postures assumed during various vowels and consonants. Relative mechanical advantage of different postures might be an important physical constraint influencing planning and control of speech production. PMID:25133544

  7. Optical and mechanical design advantages using polymer optics

    NASA Astrophysics Data System (ADS)

    Doushkina, Valentina; Fleming, Erik

    2009-08-01

    Precision diamond-turned or molded polymer optics are utilized in a wide range of commercial markets and applications including; medical disposables, bar code scan/recognition, security and fingerprint scanners, motion and presence sensors, CCD cameras, laser collimation and others.. The use of polymer optics was previously relegated to less technically challenging applications. Current advancements in polymer technology and injection molding capabilities have increased the manufacturability and precision of polymer optics. Polymer materials with optical properties are being thrust to the design forefront for new, sophisticated electro-optical applications. Designing and manufacturing optics and optical systems using polymers alone or hybrid polymer/glass applications provides complete custom capability and offers new optical and opto-mechanical solutions for a variety of optical and opto-mechanical modules, assemblies and components. Integrated mounting offers configuration flexibility, considerable design freedom, simplified optical alignment, mechanical design, assembly and packaging. The system is assembled, aligned, optically spaced, and sealed in a single manufacturing step.

  8. The Mechanisms Underlying the ASD Advantage in Visual Search.

    PubMed

    Kaldy, Zsuzsa; Giserman, Ivy; Carter, Alice S; Blaser, Erik

    2016-05-01

    A number of studies have demonstrated that individuals with autism spectrum disorders (ASDs) are faster or more successful than typically developing control participants at various visual-attentional tasks (for reviews, see Dakin and Frith in Neuron 48:497-507, 2005; Simmons et al. in Vis Res 49:2705-2739, 2009). This "ASD advantage" was first identified in the domain of visual search by Plaisted et al. (J Child Psychol Psychiatry 39:777-783, 1998). Here we survey the findings of visual search studies from the past 15 years that contrasted the performance of individuals with and without ASD. Although there are some minor caveats, the overall consensus is that-across development and a broad range of symptom severity-individuals with ASD reliably outperform controls on visual search. The etiology of the ASD advantage has not been formally specified, but has been commonly attributed to 'enhanced perceptual discrimination', a superior ability to visually discriminate between targets and distractors in such tasks (e.g. O'Riordan in Cognition 77:81-96, 2000). As well, there is considerable evidence for impairments of the attentional network in ASD (for a review, see Keehn et al. in J Child Psychol Psychiatry 37:164-183, 2013). We discuss some recent results from our laboratory that support an attentional, rather than perceptual explanation for the ASD advantage in visual search. We speculate that this new conceptualization may offer a better understanding of some of the behavioral symptoms associated with ASD, such as over-focusing and restricted interests. PMID:24091470

  9. Compensatory Advantage as a Mechanism of Educational Inequality: A Regression Discontinuity Based on Month of Birth

    ERIC Educational Resources Information Center

    Bernardi, Fabrizio

    2014-01-01

    Compensatory advantage is a mechanism of social stratification that complements cumulative advantage and path dependence. In this article, I first discuss the theoretical foundations of the compensatory advantage and path dependence mechanisms and the methodological challenges that complicate identification of their effects. Next, I present a…

  10. Autologous bone marrow stem cells--properties and advantages.

    PubMed

    Rice, Claire M; Scolding, Neil J

    2008-02-15

    The properties of self-renewal and multi-lineage differentiation make stem cells attractive candidates for use in cellular reparative therapy, particularly in neurological diseases where there is a paucity of treatment options. However, clinical trials using foetal material in Parkinson's disease have been disappointing and highlighted problems associated with the use of embryonic stem cells, including ethical issues and practical concerns regarding teratoma formation. Understandably, this has led investigators to explore alternative sources of stem cells for transplantation. The expression of neuroectodermal markers by cells of bone marrow origin focused attention on these adult stem cells. Although early enthusiasm has been tempered by dispute regarding the validity of reports of in vitro (trans)differentiation, the demonstration of functional benefit in animal models of neurological disease is encouraging. Here we will review some of the required properties of stem cells for use in transplantation therapy with specific reference to the development of bone marrow-derived cells as a source of cells for repair in demyelination. PMID:17669432

  11. Hindlimb muscle anatomical mechanical advantage differs among joints and stride phases in basilisk lizards.

    PubMed

    Bergmann, Philip J; Hare-Drubka, Meredith

    2015-08-01

    The vertebrate musculoskeletal system is composed of skeletal levers powered by muscles. Effective mechanical advantage (EMA) and muscle properties influence organismal performance at various tasks. Anatomical mechanical advantage (AMA) is a proxy for EMA that facilitates the study of preserved specimens when many muscles or many species are of interest. AMA is the quotient of in-lever to out-lever length, and quantifies the force-velocity trade-off of a lever, where high AMAs translate into high force, low velocity levers. We studied AMAs, physiological cross-sectional areas (PCSAs), fiber lengths, and fiber widths for 20 hindlimb muscles of the lizard Basiliscus vittatus, moving the hip, knee, and ankle during both the stance and swing phases of the stride. We tested the hypotheses that muscles moving proximal limb joints, and those active during stance, would have characteristics that maximize force. We also tested whether adults had more force-optimized levers than juveniles to compensate for higher body mass. We found no differences between adults and juveniles, but found differences among joints and between stride phases. AMAs were lowest and PCSAs highest for the knee, and PCSA was higher for stance than swing muscles. Fiber width decreased distally, but did not differ between stride phases. Fiber length of stance muscles decreased distally and was highest for swing muscles of the knee. Our findings show that different muscle and lever characteristics allow the knee to be both force- and velocity-optimized, indicating its important role in locomotion. PMID:26013100

  12. Mechanical Properties of Cells

    NASA Technical Reports Server (NTRS)

    Bradley, Robert; Becerril, Joseph; Jeevarajan, Anthony

    2007-01-01

    Many physiologic and pathologic processes alter the biomechanical properties of the tissue they affect, and these changes may be manifest at the single cell level. The normal and abnormal mechanical properties of a given cell type can be established with the aid of an atomic force microscope (AFM), nonetheless, consistency in the area of the tip has been a mayor limitation of using the AFM for quantitative measurements of mechanical properties. This project attempts to overcome this limitation by using materials with a known elastic modulus, which resembles the one of the cell, to create force-deformation curves to calculate the area of indentation by means of Hooke s Law (sigma = E(epsilon)), which states that stress (sigma) is proportional to the strain (epsilon) where the constant of proportionality, E, is called the Young s modulus, also referred as the elastic modulus. Hook s Law can be rearranged to find the area of indentation (Area= Force/ E(epsilon)), where the indentation force is defined by the means of the added mass spring calibration method.

  13. Mechanical Properties of Aerogels

    NASA Technical Reports Server (NTRS)

    Parmenter, Kelly E.; Milstein, Frederick

    1995-01-01

    Aerogels are extremely low density solids that are characterized by a high porosity and pore sizes on the order of nanometers. Their low thermal conductivity and sometimes transparent appearance make them desirable for applications such as insulation in cryogenic vessels and between double paned glass in solar architecture. An understanding of the mechanical properties of aerogels is necessary before aerogels can be used in load bearing applications. In the present study, the mechanical behavior of various types of fiber-reinforced silica aerogels was investigated with hardness, compression, tension and shear tests. Particular attention was paid to the effects of processing parameters, testing conditions, storage environment, and age on the aerogels' mechanical response. The results indicate that the addition of fibers to the aerogel matrix generally resulted in softer, weaker materials with smaller elastic moduli. Furthermore, the testing environment significantly affected compression results. Tests in ethanol show an appreciable amount of scatter, and are not consistent with results for tests in air. In fact, the compression specimens appeared to crack and begin to dissolve upon exposure to the ethanol solution. This is consistent with the inherent hydrophobic nature of these aerogels. In addition, the aging process affected the aerogels' mechanical behavior by increasing their compressive strength and elastic moduli while decreasing their strain at fracture. However, desiccation of the specimens did not appreciably affect the mechanical properties, even though it reduced the aerogel density by removing trapped moisture. Finally, tension and shear test results indicate that the shear strength of the aerogels exceeds the tensile strength. This is consistent with the response of brittle materials. Future work should concentrate on mechanical testing at cryogenic temperatures, and should involve more extensive tensile tests. Moreover, before the mechanical response

  14. Selection for mechanical advantage underlies multiple cranial optima in new world leaf-nosed bats.

    PubMed

    Dumont, Elizabeth R; Samadevam, Krishna; Grosse, Ian; Warsi, Omar M; Baird, Brandon; Davalos, Liliana M

    2014-05-01

    Selection for divergent performance optima has been proposed as a central mechanism underlying adaptive radiation. Uncovering multiple optima requires identifying forms associated with different adaptive zones and linking those forms to performance. However, testing and modeling the performance of complex morphologies like the cranium is challenging. We introduce a three-dimensional finite-element (FE) model of the cranium that can be morphed into different shapes by varying simple parameters to investigate the relationship between two engineering-based measures of performance, mechanical advantage and von Mises stress, and four divergent adaptive zones occupied by New World Leaf-nosed bats. To investigate these relationships, we tested the fit of Brownian motion and Ornstein-Uhlenbeck models of evolution in mechanical advantage and von Mises stress using dated multilocus phylogenies. The analyses revealed three performance optima for mechanical advantage among species from three adaptive zones: bats that eat nectar; generalized insectivores, omnivores and some frugivores; and bats that specialize on hard canopy fruits. Only two optima, one corresponding to nectar feeding, were consistently uncovered for von Mises stress. These results suggest that mechanical advantage played a larger role than von Mises stress in the radiation of New World Leaf-nosed bats into divergent adaptive zones. PMID:24433457

  15. The estimated mechanical advantage of the prosimian ankle joint musculature, and implications for locomotor adaptation.

    PubMed

    Goto, Ryosuke; Kumakura, Hiroo

    2013-05-01

    In this study we compared the power arm lengths and mechanical advantages attributed to 12 lower leg muscles across three prosimian species. The origins and insertions of the lower leg muscles in Garnett's galago, the ring-tailed lemur, and the slow loris were quantified and correlated with positional behaviour. The ankle joint of the galago has a speed-oriented mechanical system, in contrast to that of the slow loris, which exhibits more power-oriented mechanics. The lemur ankle joint exhibited intermediate power arm lengths and an intermediate mechanical advantage relative to the other primates. This result suggests that the mechanical differences in the ankle between the galago and the lemur, taxa that exhibit similar locomotory repertoires, reflect a difference in the kinematics and kinetics of leaping (i.e. generalised vs. specialised leapers). In contrast to leaping primates, lorises have developed a more power-oriented mechanical system as a foot adaptation for positional behaviours such as bridging or cantilevering in their arboreal habitat. PMID:23489408

  16. A novel mechanism for a survival advantage of vigilant individuals in groups.

    PubMed

    van der Post, Daniel J; de Weerd, Harmen; Verbrugge, Rineke; Hemelrijk, Charlotte K

    2013-11-01

    In many animal species, vigilance is crucial for avoiding predation. In groups, however, nonvigilant individuals could benefit from the vigilance of others without any of the associated costs. In an evolutionary sense, such exploitation may be compensated if vigilant individuals have a survival advantage. The novelty in our model is that the probability to detect a predator is "distance dependent." We show that even if nonvigilant individuals benefit fully from information produced by vigilant individuals, vigilant individuals nevertheless enjoy a survival advantage. This happens because detection of predators is more likely when vigilant individuals happen to be targets of predation. We expect this distance-dependent mechanism to be compatible with previously reported mechanisms. PMID:24107375

  17. Ontogenetic change in skull morphology and mechanical advantage in the spotted hyena (Crocuta crocuta).

    PubMed

    Tanner, Jaime B; Zelditch, Miriam L; Lundrigan, Barbara L; Holekamp, Kay E

    2010-03-01

    Weaning represents a challenging transition for young mammals, one particularly difficult for species coping with extreme conditions during feeding. Spotted hyenas (Crocuta crocuta) experience such extreme conditions imposed by intense feeding competition during which the ability to consume large quantities of food quickly is highly advantageous. As adult spotted hyenas have massive skulls specialized for durophagy and can feed very rapidly, young individuals are likely at a competitive disadvantage until that specialized morphology is completely developed. Here we document developmental changes in skull size, shape, and mechanical advantage of the jaws. Sampling an ontogenetic series of Crocuta skulls from individuals ranging in age from 2 months to 18 years, we use linear measurements and geometric morphometrics to test hypotheses suggesting that size, limited mechanical advantage of the jaws, and/or limited attachment sites for jaw muscles might constrain the feeding performance of juveniles. We also examine skull development in relation to key life history events, including weaning and reproductive maturity, to inquire whether ontogeny of the feeding apparatus is slower or more protracted in this species than in carnivores not specialized for durophagy. We find that, although mechanical advantage reaches maturity in hyenas at 22 months, adult skull size is not achieved until 29 months of age, and skull shape does not reach maturity until 35 months. The latter is nearly 2 years after mean weaning age, and more than 1 year after reproductive maturity. Thus, skull development in Crocuta is indeed protracted relative to that in most other carnivores. Based on the skull features that continue to change and to provide additional muscle attachment area, protracted development may be largely due to development of the massive musculature required by durophagy. These findings may ultimately shed light on the adaptive significance of the unusual "role-reversed" pattern of

  18. Mechanical properties of nanophase materials

    SciTech Connect

    Siegel, R.W.; Fougere, G.E.

    1993-11-01

    It has become possible in recent years to synthesize new materials under controlled conditions with constituent structures on a nanometer size scale (below 100 nm). These novel nanophase materials have grain-size dependent mechanical properties significantly different than those of their coarser-grained counterparts. For example, nanophase metals are much stronger and apparently less ductile than conventional metals, while nanophase ceramics are more ductile and more easily formed than conventional ceramics. The observed mechanical property changes are related to grain size limitations and/or the large percentage of atoms in grain boundary environments; they can also be affected by such features as flaw populations, strains and impurity levels that can result from differing synthesis and processing methods. An overview of what is presently known about the mechanical properties of nanophase materials, including both metals and ceramics, is presented. Some possible atomic mechanisms responsible for the observed behavior in these materials are considered in light of their unique structures.

  19. The effective mechanical advantage of a.L. 129-1a for knee extension.

    PubMed

    Sylvester, Adam D; Mahfouz, Mohamed R; Kramer, Patricia Ann

    2011-09-01

    The functional significance of shape differences between modern human and australopithecine distal femora remains unclear. Here, we examine the morphological component of the effective mechanical advantage (EMA) of the quadriceps muscle group in a sample of hominins that includes the fossil A.L. 129-1a (Australopithecus afarensis) and modern humans. Quadriceps muscle moment arms were calculated from three-dimensional computer models of specimens through a range of knee flexion. All hominins were compared using the same limb positions to allow us to examine, in isolation, the morphological component of the lengths of the pertinent moment arms. After taking into account the differences in bicondylar angle, the morphological component of the EMA was calculated as the ratio of the quadriceps muscle and ground reaction force moment arms. Our analyses reveal that A.L. 129-1a would have possessed a morphological component of the quadriceps muscle EMA expected for a hominin of its body mass. PMID:21809469

  20. Mechanical Properties of Respiratory Muscles

    PubMed Central

    Sieck, Gary C.; Ferreira, Leonardo F.; Reid, Michael B.; Mantilla, Carlos B.

    2014-01-01

    Striated respiratory muscles are necessary for lung ventilation and to maintain the patency of the upper airway. The basic structural and functional properties of respiratory muscles are similar to those of other striated muscles (both skeletal and cardiac). The sarcomere is the fundamental organizational unit of striated muscles and sarcomeric proteins underlie the passive and active mechanical properties of muscle fibers. In this respect, the functional categorization of different fiber types provides a conceptual framework to understand the physiological properties of respiratory muscles. Within the sarcomere, the interaction between the thick and thin filaments at the level of cross-bridges provides the elementary unit of force generation and contraction. Key to an understanding of the unique functional differences across muscle fiber types are differences in cross-bridge recruitment and cycling that relate to the expression of different myosin heavy chain isoforms in the thick filament. The active mechanical properties of muscle fibers are characterized by the relationship between myoplasmic Ca2+ and cross-bridge recruitment, force generation and sarcomere length (also cross-bridge recruitment), external load and shortening velocity (cross-bridge cycling rate), and cross-bridge cycling rate and ATP consumption. Passive mechanical properties are also important reflecting viscoelastic elements within sarcomeres as well as the extracellular matrix. Conditions that affect respiratory muscle performance may have a range of underlying pathophysiological causes, but their manifestations will depend on their impact on these basic elemental structures. PMID:24265238

  1. Mechanical properties of nanocrystalline cobalt

    NASA Astrophysics Data System (ADS)

    Karimpoor, Amir A.; Erb, Uwe

    2006-05-01

    Due to their excellent wear and corrosion properties, nanocrystalline cobalt and several cobalt alloys made by electrodeposition are currently being developed as environmentally benign replacement coatings for hard chromium electrodeposits. The focus of this study is on the mechanical properties of nanocrystalline cobalt, which are currently not well understood. A comparison is presented for hardness, tensile properties, Charpy impact properties and fracture surface analysis of both nanocrystalline (grain size: 12 nm) and conventional polycrystalline (grain size: 4.8 m) cobalt. It is shown that the hardness and tensile strength of nanocrystalline cobalt is 2-3 times higher than for polycrystalline cobalt. However, in contrast to other nanocrystalline materials tested previously, nanocrystalline cobalt retains considerable ductility with elongation to fracture values up to 7%.

  2. Carbon nanotubes: Properties, biomedical applications, advantages and risks in patients and occupationally-exposed workers.

    PubMed

    Lamberti, M; Pedata, P; Sannolo, N; Porto, S; De Rosa, A; Caraglia, M

    2015-03-01

    Since the beginning of the 21st century, carbon-based nanomaterials (CNTs) have been introduced in pharmacy and medicine for drug delivery system in therapeutics. CNTs have proved able to transport a wide range of molecules across membranes and into living cells; therefore, they have attracted great interest in biomedical applications such as advanced imaging, tissue regeneration, and drug or gene delivery. Although there are many data on the advantages in terms of higher efficacy and less adverse effects, several recent findings have reported unexpected toxicities induced by CNTs. The dose, shape, surface chemistry, exposure route, and purity play important roles in these differential toxicities. Mapping these risks as well as understanding their molecular mechanisms is a crucial step in the development of any CNT-containing nanopharmaceuticals. This paper seeks to provide a comprehensive review of all articles published on cellular response to CNTs, underlining their therapeutic applications and possible toxicity in patients and occupationally exposed workers. PMID:25816400

  3. Use of general purpose mechanical computer assisted engineering software in orthopaedic surgical planning: advantages and limitations.

    PubMed

    Sutherland, C J; Bresina, S J; Gayou, D E

    1994-01-01

    Two surgical plans were developed for an appropriately complex reconstructive orthopaedic surgery case. One plan was developed with customary methods using two-dimensional (2D) radiographs. The second plan was developed with general purpose mechanical computer assisted engineering (MCAE) software using x-ray computed tomography (CT) data. The limitations of each method are identified. To create a surgical plan using three-dimensional (3D) medical datasets and MCAE software, five necessary steps were identified: (a) data reduction; (b) contour extraction; (c) 3D model creation; (d) extraction of mass properties; (e) model idealization. The principal limitation of general purpose MCAE software is the lack of pre-processing modules with which to address the unique requirements of medical image datasets. PMID:7850738

  4. Woven TPS Mechanical Property Evaluation

    NASA Technical Reports Server (NTRS)

    Gonzales, Gregory Lewis; Kao, David Jan-Woei; Stackpoole, Margaret M.

    2013-01-01

    Woven Thermal Protection Systems (WTPS) is a relatively new program funded by the Office of the Chief Technologist (OCT). The WTPS approach to producing TPS architectures uses precisely engineered 3-D weaving techniques that allow tailoring material characteristics needed to meet specific mission requirements. A series of mechanical tests were performed to evaluate performance of different weave types, and get a better understanding of failure modes expected in these three-dimensional architectures. These properties will aid in material down selection and guide selection of the appropriate WTPS for a potential mission.

  5. Mechanical Properties of Niobium Cavities

    SciTech Connect

    Ciovati, Gianluigi; Dhakal, Pashupati; Matalevich, Joseph R.; Myneni, Ganapati Rao

    2015-09-01

    The mechanical stability of bulk Nb cavity is an important aspect to be considered in relation to cavity material, geometry and treatments. Mechanical properties of Nb are typically obtained from uniaxial tensile tests of small samples. In this contribution we report the results of measurements of the resonant frequency and local strain along the contour of single-cell cavities made of ingot and fine-grain Nb of different purity subjected to increasing uniform differential pressure, up to 6 atm. Measurements have been done on cavities subjected to different heat treatments. Good agreement between finite element analysis simulations and experimental data in the elastic regime was obtained with a single set of values of Young’s modulus and Poisson’s ratio. The experimental results indicate that the yield strength of medium-purity ingot Nb cavities is higher than that of fine-grain, high-purity Nb.

  6. Mechanical properties of metal dihydrides

    NASA Astrophysics Data System (ADS)

    Schultz, Peter A.; Snow, Clark S.

    2016-03-01

    First-principles calculations are used to characterize the bulk elastic properties of cubic and tetragonal phase metal dihydrides, \\text{M}{{\\text{H}}2} {\\text{M}   =  Sc, Y, Ti, Zr, Hf, lanthanides} to gain insight into the mechanical properties that govern the aging behavior of rare-earth di-tritides as the constituent 3H, tritium, decays into 3He. As tritium decays, helium is inserted in the lattice, the helium migrates and collects into bubbles, that then can ultimately create sufficient internal pressure to rupture the material. The elastic properties of the materials are needed to construct effective mesoscale models of the process of bubble growth and fracture. Dihydrides of the scandium column and most of the rare-earths crystalize into a cubic phase, while dihydrides from the next column, Ti, Zr, and Hf, distort instead into the tetragonal phase, indicating incipient instabilities in the phase and potentially significant changes in elastic properties. We report the computed elastic properties of these dihydrides, and also investigate the off-stoichiometric phases as He or vacancies accumulate. As helium builds up in the cubic phase, the shear moduli greatly soften, converting to the tetragonal phase. Conversely, the tetragonal phases convert very quickly to cubic with the removal of H from the lattice, while the cubic phases show little change with removal of H. The source and magnitude of the numerical and physical uncertainties in the modeling are analyzed and quantified to establish the level of confidence that can be placed in the computational results, and this quantified confidence is used to justify using the results to augment and even supplant experimental measurements.

  7. Mechanical properties of metal dihydrides

    DOE PAGESBeta

    Schultz, Peter A.; Snow, Clark S.

    2016-02-04

    First-principles calculations are used to characterize the bulk elastic properties of cubic and tetragonal phase metal dihydrides,more » $$\\text{M}{{\\text{H}}_{2}}$$ {$$\\text{M}$$ = Sc, Y, Ti, Zr, Hf, lanthanides} to gain insight into the mechanical properties that govern the aging behavior of rare-earth di-tritides as the constituent 3H, tritium, decays into 3He. As tritium decays, helium is inserted in the lattice, the helium migrates and collects into bubbles, that then can ultimately create sufficient internal pressure to rupture the material. The elastic properties of the materials are needed to construct effective mesoscale models of the process of bubble growth and fracture. Dihydrides of the scandium column and most of the rare-earths crystalize into a cubic phase, while dihydrides from the next column, Ti, Zr, and Hf, distort instead into the tetragonal phase, indicating incipient instabilities in the phase and potentially significant changes in elastic properties. We report the computed elastic properties of these dihydrides, and also investigate the off-stoichiometric phases as He or vacancies accumulate. As helium builds up in the cubic phase, the shear moduli greatly soften, converting to the tetragonal phase. Conversely, the tetragonal phases convert very quickly to cubic with the removal of H from the lattice, while the cubic phases show little change with removal of H. Finally, the source and magnitude of the numerical and physical uncertainties in the modeling are analyzed and quantified to establish the level of confidence that can be placed in the computational results, and this quantified confidence is used to justify using the results to augment and even supplant experimental measurements.« less

  8. Filamentous phages prevalent in Pseudoalteromonas spp. confer properties advantageous to host survival in Arctic sea ice

    PubMed Central

    Yu, Zi-Chao; Chen, Xiu-Lan; Shen, Qing-Tao; Zhao, Dian-Li; Tang, Bai-Lu; Su, Hai-Nan; Wu, Zhao-Yu; Qin, Qi-Long; Xie, Bin-Bin; Zhang, Xi-Ying; Yu, Yong; Zhou, Bai-Cheng; Chen, Bo; Zhang, Yu-Zhong

    2015-01-01

    Sea ice is one of the most frigid environments for marine microbes. In contrast to other ocean ecosystems, microbes in permanent sea ice are space confined and subject to many extreme conditions, which change on a seasonal basis. How these microbial communities are regulated to survive the extreme sea ice environment is largely unknown. Here, we show that filamentous phages regulate the host bacterial community to improve survival of the host in permanent Arctic sea ice. We isolated a filamentous phage, f327, from an Arctic sea ice Pseudoalteromonas strain, and we demonstrated that this type of phage is widely distributed in Arctic sea ice. Growth experiments and transcriptome analysis indicated that this phage decreases the host growth rate, cell density and tolerance to NaCl and H2O2, but enhances its motility and chemotaxis. Our results suggest that the presence of the filamentous phage may be beneficial for survival of the host community in sea ice in winter, which is characterized by polar night, nutrient deficiency and high salinity, and that the filamentous phage may help avoid over blooming of the host in sea ice in summer, which is characterized by polar day, rich nutrient availability, intense radiation and high concentration of H2O2. Thus, while they cannot kill the host cells by lysing them, filamentous phages confer properties advantageous to host survival in the Arctic sea ice environment. Our study provides a foremost insight into the ecological role of filamentous phages in the Arctic sea ice ecosystem. PMID:25303713

  9. Mechanical Properties of Nanocrystal Supercrystals

    SciTech Connect

    Tam, Enrico; Podsiadlo, Paul; Shevchenko, Elena; Ogletree, D. Frank; Delplancke-Ogletree, Marie-Paule; Ashby, Paul D.

    2009-12-30

    Colloidal nanocrystals attract significant interest due to their potential applications in electronic, magnetic, and optical devices. Nanocrystal supercrystals (NCSCs) are particularly appealing for their well ordered structure and homogeneity. The interactions between organic ligands that passivate the inorganic nanocrystal cores critically influence their self-organization into supercrystals, By investigating the mechanical properties of supercrystals, we can directly characterize the particle-particle interactions in a well-defined geometry, and gain insight into both the self-assembly process and the potential applications of nanocrystal supercrystals. Here we report nanoindentation studies of well ordered lead-sulfide (Pbs) nanocrystal supercrystals. Their modulus and hardness were found to be similar to soft polymers at 1.7 GPa and 70 MPa respectively and the fractures toughness was 39 KPa/m1/2, revealing the extremely brittle nature of these materials.

  10. Mechanical properties of titanium connectors.

    PubMed

    Neo, T K; Chai, J; Gilbert, J L; Wozniak, W T; Engelman, M J

    1996-01-01

    The tensile mechanical properties of welded titanium joints were studied, and intact titanium was used as controls. Welded joints were fabricated with either a stereographic laser-welding technique or a gas tungsten arc welding technique. The effect of heat treatment following a simulated porcelain application was also investigated. Heat-treated laser welds had significantly lower ultimate tensile strengths. Heat treatment had no effect on the modulus of elasticity or elongation, but generally significantly decreased the yield strength of the titanium specimens. The gas tungsten are welding specimens had significantly higher yield strengths and elastic moduli than the other two groups. The elongation of the control specimens was significantly greater than the elongation of the gas tungsten arc welding specimens, which was in turn significantly higher than that of the laser-welded specimens. PMID:8957877

  11. Mechanical Properties of Primary Cilia

    NASA Astrophysics Data System (ADS)

    Battle, Christopher; Schmidt, Christoph F.

    2013-03-01

    Recent studies have shown that the primary cilium, long thought to be a vestigial cellular appendage with no function, is involved in a multitude of sensory functions. One example, interesting from both a biophysical and medical standpoint, is the primary cilium of kidney epithelial cells, which acts as a mechanosensitive flow sensor. Genetic defects in ciliary function can cause, e.g., polycystic kidney disease (PKD). The material properties of these non-motile, microtubule-based 9 +0 cilia, and the way they are anchored to the cell cytoskeleton, are important to know if one wants to understand the mechano-electrochemical response of these cells, which is mediated by their cilia. We have probed the mechanical properties, boundary conditions, and dynamics of the cilia of MDCK cells using optical traps and DIC/fluorescence microscopy. We found evidence for both elastic relaxation of the cilia themselves after bending and for compliance in the intracellular anchoring structures. Angular and positional fluctuations of the cilia reflect both thermal excitations and cellular driving forces.

  12. Chirality-Mediated Mechanical and Structural Properties of Oligopeptide Hydrogels

    SciTech Connect

    Taraban, Marc B.; Feng, Yue; Hammouda, Boualem; Hyland, Laura L.; Yu, Y. Bruce

    2012-10-29

    The origin and the effects of homochirality in the biological world continuously stimulate numerous hypotheses and much debate. This work attempts to look at the biohomochirality issue from a different angle - the mechanical properties of the bulk biomaterial and their relation to nanoscale structures. Using a pair of oppositely charged peptides that co-assemble into hydrogels, we systematically investigated the effect of chirality on the mechanical properties of these hydrogels through different combinations of syndiotactic and isotactic peptides. It was found that homochirality confers mechanical advantage, resulting in a higher elastic modulus and strain yield value. Yet, heterochirality confers kinetic advantage, resulting in faster gelation. Structurally, both homochiral and heterochiral hydrogels are made of fibers interconnected by lappet-like webs, but the homochiral peptide fibers are thicker and denser. These results highlight the possible role of biohomochirality in the evolution and/or natural selection of biomaterials.

  13. Mechanical Advantage. 7th and 8th Grade Agriculture Science Curriculum. Teacher Materials.

    ERIC Educational Resources Information Center

    Southern Illinois Univ., Carbondale. Dept. of Agricultural Education and Mechanization.

    This curriculum guide, the fourth in a set of six, contains teacher and student materials for a unit on mechanical engineering prepared as part of a seventh- and eighth-grade agricultural science curriculum that is integrated with science instruction. The guide contains the state goals and sample learning objectives for each goal for students in…

  14. Echocardiographic Evaluation of Left Atrial Mechanics: Function, History, Novel Techniques, Advantages, and Pitfalls

    PubMed Central

    Leischik, Roman; Littwitz, Henning; Dworrak, Birgit; Garg, Pankaj; Zhu, Meihua; Sahn, David J.; Horlitz, Marc

    2015-01-01

    Left atrial (LA) functional analysis has an established role in assessing left ventricular diastolic function. The current standard echocardiographic parameters used to study left ventricular diastolic function include pulsed-wave Doppler mitral inflow analysis, tissue Doppler imaging measurements, and LA dimension estimation. However, the above-mentioned parameters do not directly quantify LA performance. Deformation studies using strain and strain-rate imaging to assess LA function were validated in previous research, but this technique is not currently used in routine clinical practice. This review discusses the history, importance, and pitfalls of strain technology for the analysis of LA mechanics. PMID:26236735

  15. Transplant Tolerance Induction in Newborn Infants: Mechanisms, Advantages, and Potential Strategies

    PubMed Central

    Pan, Hua; Gazarian, Aram; Dubernard, Jean-Michel; Belot, Alexandre; Michallet, Marie-Cécile; Michallet, Mauricette

    2016-01-01

    Although several tolerance induction protocols have been successfully implemented in adult renal transplantation, no tolerance induction approach has, as yet, been defined for solid organ transplantations in young infants. Pediatric transplant recipients have a pressing demand for the elaboration of tolerance induction regimens. Indeed, since they display a longer survival time, they are exposed to a higher level of risks linked to long-term immunosuppression (IS) and to chronic rejection. Interestingly, central tolerance induction may be of great interest in newborns, because of their immunological immaturity and the important role of the thymus at this early stage in life. The present review aims to clarify mechanisms and strategies of tolerance induction in these immunologically premature recipients. We first introduce the discovery and mechanisms of neonatal tolerance in murine experimental models and subsequently analyze tolerance induction in human newborn infants. Hematopoietic mixed chimerism in neonates is also discussed based on in utero hematopoietic stem cell (HSC) transplant studies. Then, we review the recent advances in tolerance induction approaches in adults, including the infusion of HSCs associated with less toxic conditioning regimens, regulatory T cells/facilitating cells/mesenchymal stem cells transplantation, costimulatory blockade, and thymus manipulation. Finally, IS withdrawal in pediatric solid organ transplant is discussed. In conclusion, the establishment of transplant tolerance induction in infants is promising and deserves further investigations. Future studies could focus on the selection of patients, on less toxic conditioning regimens, and on biomarkers for IS minimization or withdrawal. PMID:27092138

  16. Transplant Tolerance Induction in Newborn Infants: Mechanisms, Advantages, and Potential Strategies.

    PubMed

    Pan, Hua; Gazarian, Aram; Dubernard, Jean-Michel; Belot, Alexandre; Michallet, Marie-Cécile; Michallet, Mauricette

    2016-01-01

    Although several tolerance induction protocols have been successfully implemented in adult renal transplantation, no tolerance induction approach has, as yet, been defined for solid organ transplantations in young infants. Pediatric transplant recipients have a pressing demand for the elaboration of tolerance induction regimens. Indeed, since they display a longer survival time, they are exposed to a higher level of risks linked to long-term immunosuppression (IS) and to chronic rejection. Interestingly, central tolerance induction may be of great interest in newborns, because of their immunological immaturity and the important role of the thymus at this early stage in life. The present review aims to clarify mechanisms and strategies of tolerance induction in these immunologically premature recipients. We first introduce the discovery and mechanisms of neonatal tolerance in murine experimental models and subsequently analyze tolerance induction in human newborn infants. Hematopoietic mixed chimerism in neonates is also discussed based on in utero hematopoietic stem cell (HSC) transplant studies. Then, we review the recent advances in tolerance induction approaches in adults, including the infusion of HSCs associated with less toxic conditioning regimens, regulatory T cells/facilitating cells/mesenchymal stem cells transplantation, costimulatory blockade, and thymus manipulation. Finally, IS withdrawal in pediatric solid organ transplant is discussed. In conclusion, the establishment of transplant tolerance induction in infants is promising and deserves further investigations. Future studies could focus on the selection of patients, on less toxic conditioning regimens, and on biomarkers for IS minimization or withdrawal. PMID:27092138

  17. Enhancement of mechanical properties of 123 superconductors

    DOEpatents

    Balachandran, Uthamalingam

    1995-01-01

    A composition and method of preparing YBa.sub.2 Cu.sub.3 O.sub.7-x superconductor. Addition of tin oxide containing compounds to YBCO superconductors results in substantial improvement of fracture toughness and other mechanical properties without affect on T.sub.c. About 5-20% additions give rise to substantially improved mechanical properties.

  18. Enhancement of mechanical properties of 123 superconductors

    DOEpatents

    Balachandran, U.

    1995-04-25

    A composition and method are disclosed of preparing YBa{sub 2}Cu{sub 3}O{sub 7{minus}x} superconductor. Addition of tin oxide containing compounds to YBCO superconductors results in substantial improvement of fracture toughness and other mechanical properties without affect on T{sub c}. About 5-20% additions give rise to substantially improved mechanical properties.

  19. Bioinspired Reductionistic Peptide Engineering for Exceptional Mechanical Properties

    NASA Astrophysics Data System (ADS)

    Avinash, M. B.; Raut, Devaraj; Mishra, Manish Kumar; Ramamurty, Upadrasta; Govindaraju, T.

    2015-11-01

    A simple solution-processing and self-assembly approach that exploits the synergistic interactions between multiple hydrogen bonded networks and aromatic interactions was utilized to synthesize molecular crystals of cyclic dipeptides (CDPs), whose molecular weights (~0.2 kDa) are nearly three orders of magnitude smaller than that of natural structural proteins (50-300 kDa). Mechanical properties of these materials, measured using the nanoindentation technique, indicate that the stiffness and strength are comparable and sometimes better than those of natural fibres. The measured mechanical responses were rationalized by recourse to the crystallographic structural analysis and intermolecular interactions in the self-assembled single crystals. With this work we highlight the significance of developing small molecule based bioinspired design strategies to emulate biomechanical properties. A particular advantage of the successfully demonstrated reductionistic strategy of the present work is its amenability for realistic industrial scale manufacturing of designer biomaterials with desired mechanical properties.

  20. Bioinspired Reductionistic Peptide Engineering for Exceptional Mechanical Properties

    PubMed Central

    Avinash, M. B.; Raut, Devaraj; Mishra, Manish Kumar; Ramamurty, Upadrasta; Govindaraju, T.

    2015-01-01

    A simple solution-processing and self-assembly approach that exploits the synergistic interactions between multiple hydrogen bonded networks and aromatic interactions was utilized to synthesize molecular crystals of cyclic dipeptides (CDPs), whose molecular weights (~0.2 kDa) are nearly three orders of magnitude smaller than that of natural structural proteins (50–300 kDa). Mechanical properties of these materials, measured using the nanoindentation technique, indicate that the stiffness and strength are comparable and sometimes better than those of natural fibres. The measured mechanical responses were rationalized by recourse to the crystallographic structural analysis and intermolecular interactions in the self-assembled single crystals. With this work we highlight the significance of developing small molecule based bioinspired design strategies to emulate biomechanical properties. A particular advantage of the successfully demonstrated reductionistic strategy of the present work is its amenability for realistic industrial scale manufacturing of designer biomaterials with desired mechanical properties. PMID:26525957

  1. Mechanical properties and fiber type composition of chronically inactive muscles

    NASA Technical Reports Server (NTRS)

    Roy, R. R.; Zhong, H.; Monti, R. J.; Vallance, K. A.; Kim, J. A.; Edgerton, V. R.

    2000-01-01

    A role for neuromuscular activity in the maintenance of skeletal muscle properties has been well established. However, the role of activity-independent factors is more difficult to evaluate. We have used the spinal cord isolation model to study the effects of chronic inactivity on the mechanical properties of the hindlimb musculature in cats and rats. This model maintains the connectivity between the motoneurons and the muscle fibers they innervate, but the muscle unit is electrically "silent". Consequently, the measured muscle properties are activity-independent and thus the advantage of using this model is that it provides a baseline level (zero activity) from which regulatory factors that affect muscle cell homeostasis can be defined. In the present paper, we will present a brief review of our findings using the spinal cord isolation model related to muscle mechanical and fiber type properties.

  2. Microstructure and mechanical properties of sheep horn.

    PubMed

    Zhu, Bing; Zhang, Ming; Zhao, Jian

    2016-07-01

    The sheep horn presents outstanding mechanical properties of impact resistance and energy absorption, which suits the need of the vehicle bumper design, but the mechanism behind this phenomenon is less investigated. The microstructure and mechanical properties of the sheep horn of Small Tailed Han Sheep (Ovis aries) living in northeast China were investigated in this article. The effect of sampling position and orientation of the sheep horn sheath on mechanical properties were researched by tensile and compression tests. Meanwhile, the surface morphology and microstructure of the sheep horn were observed using scanning electron microscopy (SEM). The formation mechanism of the mechanical properties of the sheep horn was investigated by biological coupling analysis. The analytical results indicated that the outstanding mechanical properties of the sheep horn are determined by configuration, structure, surface morphology and material coupling elements. These biological coupling elements make the sheep horn possess super characteristics of crashworthiness and energy absorption through the internal coupling mechanism. We suppose that these findings would make a difference in vehicle bumper design. Microsc. Res. Tech. 79:664-674, 2016. © 2016 Wiley Periodicals, Inc. PMID:27184115

  3. Mechanical property characterization of intraply hybrid composites

    NASA Technical Reports Server (NTRS)

    Chamis, C. C.; Lark, R. F.; Sinclair, J. H.

    1979-01-01

    An investigation of the mechanical properties of intraply hybrids made from graphite fiber/epoxy matrix hybridized with secondary S-glass or Kevlar 49 fiber composites is presented. The specimen stress-strain behavior was determined, showing that mechanical properties of intraply hybrid composites can be measured with available methods such as the ten-degree off-axis test for intralaminar shear, and conventional tests for tensile, flexure, and Izod impact properties. The results also showed that combinations of high modulus graphite/S-glass/epoxy matrix composites exist which yield intraply hybrid laminates with the best 'balanced' properties, and that the translation efficiency of mechanical properties from the constituent composites to intraply hybrids may be assessed with a simple equation.

  4. Mechanical properties of low tantalum alloys

    NASA Technical Reports Server (NTRS)

    Kortovich, C. S.

    1982-01-01

    The mechanical property behavior of equiaxed cast B-1900 + Hf alloy as a function of tantalum content was studied. Tensile and stress rupture characterization was conducted on cast to size test bars containing tantalum at the 4.3% (standard level), 2.2% and 0% levels. Casting parameters were selected to duplicate conditions used to prepare test specimens for master metal heat qualification. The mechanical property results as well as results of microstructural/phase analysis of failed test bars are presented.

  5. Thigmomorphogenesis: on the mechanical properties of mechanically perturbed bean plants.

    PubMed

    Jaffe, M J; Telewski, F W; Cooke, P W

    1984-01-01

    The mechanical properties of control and mechanically perturbed (MP) bean stems (Phaseolus vulgaris L., cv. Cherokee wax) were compared. The rubbed plants were greatly hardened against mechanical rupture by previous MP. This hardening was due to a dramatic increase in the flexibility of the stems, but not in their stiffness. The MP-plants were able to bend more than 90 degree without breaking, whereas the control plants broke after just slight bending. A comparison with other work reveals that different species utilize different tactics for achieving similar resistance to rupture due to mechanical stress. PMID:11540788

  6. Structures and Mechanical Properties of Natural and Synthetic Diamonds

    NASA Technical Reports Server (NTRS)

    Miyoshi, Kazuhisa

    1998-01-01

    A revolution in the diamond technology is in progress, as the low-pressure process becomes an industrial reality. It will soon be possible to take advantage of the demanding properties of diamond to develop a myriad of new applications, particularly for self-lubricating, wear-resistant, and superhard coatings. The production of large diamond films or sheets at low cost, a distinct possibility in the not-too-distant future, may drastically change tribology technology, particularly regarding solid lubricants and lubricating materials and systems. This paper reviews the structures and properties of natural and synthetic diamonds to gain a better understanding of the tribological properties of diamond and related materials. Atomic and crystal structure, impurities, mechanical properties, and indentation hardness of diamond are described.

  7. Characterization of High Temperature Mechanical Properties Using Laser Ultrasound

    SciTech Connect

    David Hurley; Stephen Reese; Farhad Farzbod; Rory Kennedy

    2012-05-01

    Mechanical properties are controlled to a large degree by defect structures such as dislocations and grain boundaries. These microstructural features involve a perturbation of the perfect crystal lattice (i.e. strain fields). Viewed in this context, high frequency strain waves (i.e. ultrasound) provide a natural choice to study microstructure mediated mechanical properties. In this presentation we use laser ultrasound to probe mechanical properties of materials. This approach utilizes lasers to excite and detect ultrasonic waves, and as a consequence has unique advantages over other methods—it is noncontacting, requires no couplant or invasive sample preparation (other than that used in metallurgical analysis), and has the demonstrated capability to probe microstructure on a micron scale. Laser techniques are highly reproducible enabling sophisticated, microstructurally informed data analysis. Since light is being used for generation and detection of the ultrasonic wave, the specimen being examined is not mechanically coupled to the transducer. As a result, laser ultrasound can be carried out remotely, an especially attractive characteristic for in situ measurements in severe environments. Several examples involving laser ultrasound to measure mechanical properties in high temperature environments will be presented. Emphasis will be place on understanding the role of grain microstructure.

  8. Mechanical properties of mesoporous ceria nanoarchitectures.

    PubMed

    Sayle, Thi X T; Inkson, Beverley J; Möbus, Günter; Parker, Stephen C; Seal, Sudipta; Sayle, Dean C

    2014-12-01

    Architectural constructs are engineered to impart desirable mechanical properties facilitating bridges spanning a thousand meters and buildings nearly 1 km in height. However, do the same 'engineering-rules' translate to the nanoscale, where the architectural features are less than 0.0001 mm in size? Here, we calculate the mechanical properties of a porous ceramic functional material, ceria, as a function of its nanoarchitecture using molecular dynamics simulation and predict its yield strength to be almost two orders of magnitude higher than the parent bulk material. In particular, we generate models of nanoporous ceria with either a hexagonal or cubic array of one-dimensional pores and simulate their responses to mechanical load. We find that the mechanical properties are critically dependent upon the orientation between the crystal structure (symmetry, direction) and the pore structure (symmetry, direction). PMID:25322448

  9. The mechanical properties of FeAl

    SciTech Connect

    Baker, I.; George, E.P.

    1996-12-31

    Only in the last few years has progress been made in obtaining reproducible mechanical properties data for FeAl. Two sets of observations are the foundation of this progress. The first is that the large vacancy concentrations that exist in FeAl at high temperature are easily retained at low temperature and that these strongly affect the low-temperature mechanical properties. The second is that RT ductility is adversely affected by water vapor. Purpose of this paper is not to present a comprehensive overview of the mechanical properties of FeAl but rather to highlight our understanding of key phenomena and to show how an understanding of the factors which control the yield strength and fracture behavior has followed the discovery of the above two effects. 87 refs, 9 figs.

  10. Stainless Steel Microstructure and Mechanical Properties Evaluation

    SciTech Connect

    Switzner, Nathan T

    2010-06-01

    A nitrogen strengthened 21-6-9 stainless steel plate was spinformed into hemispherical test shapes. A battery of laboratory tests was used to characterize the hemispheres. The laboratory tests show that near the pole (axis) of a spinformed hemisphere the yield strength is the lowest because this area endures the least “cold-work” strengthening, i.e., the least deformation. The characterization indicated that stress-relief annealing spinformed stainless steel hemispheres does not degrade mechanical properties. Stress-relief annealing reduces residual stresses while maintaining relatively high mechanical properties. Full annealing completely eliminates residual stresses, but reduces yield strength by about 30%.

  11. Mechanical properties of Silicon Carbide Nanowires

    NASA Astrophysics Data System (ADS)

    Alkhateeb, Abdullah; Zhang, Daqing; McIlroy, David; Aston, David Eric

    2004-05-01

    Silicon carbide nanowires could be potentially useful for high strength materials which lead to the interest in understanding their mechanical properties. In this report we use the digital pulse force microscopy to analyze the mechanical properties of SiC nanowires .Stiffness and adhesion images of SiC nanowires on silicon grating were obtained and calibrated force-distance curves were plotted along the wire which spans on a 1.5 micron trench. Moreover, spring constant and Young's modules have been calculated from the linear part of the force-distance curves.

  12. Mechanical Properties of Ingot Nb Cavities

    SciTech Connect

    Ciovati, Gianluigi; Dhakal, Pashupati; Kneisel, Peter; Mammosser, John; Matalevich, Joseph; Rao Myneni, Ganapati

    2014-07-01

    This contribution presents the results of measurements of the resonant frequency and of strain along the contour of a single-cell cavity made of ingot Nb subjected to increasing uniform differential pressure, up to 6 atm. The data were used to infer mechanical properties of this material after cavity fabrication, by comparison with the results from simulation calculations done with ANSYS. The objective is to provide useful information about the mechanical properties of ingot Nb cavities which can be used in the design phase of SRF cavities intended to be built with this material.

  13. Measurement and Comparison of Mechanical Properties of Nitinol Stents

    NASA Astrophysics Data System (ADS)

    Hanus, Josef; Zahora, Jiri

    2005-01-01

    The self expandable Nitinol stents or stentgrafts are typically used for miniinvasive treatment of stenosis and aneurysms in the cardiovascular system. The minimal traumatisation of the patient, shorter time of hospitalization are typical advantages of these methods. More than ten years of experience has yielded also important information about the performance of stents in interaction with biological system and the possible problems related with it. The leakage or the shift of stent are some typical disadvantages, that can be related among other in the construction of the stent. The problem is that the mechanical properties, dimensions and the dynamical properties of the stent do not exactly correspond to the properties of the vessel or generally of tissue where this stent is introduced. The measurement, the description and the comparison of the relations between the mechanical properties of stents and tissues can be one of the possible ways to minimize these disadvantages. The developed original computer controlled measuring system allows the measurement of mechanical properties of stents, the measurement of strain-stress curves or simulation of interaction of the stent and vessel for exactly defined hemodynamic conditions. We measured and compared the mechanical parameters of different selfexpandable Nitinol stents, which differed in geometry (radius and length), in the type of construction (number of branches and rising of winding) and in the diameter of used wire. The results of measurements confirmed the theoretical assumptions that just the diameter of the Nitinol wire significantly influences the rigidity and the level of compressibility of the stent as well. A compromise must be found between the required rigidity of the stent and the minimal size of the delivery system. The exact description of the relation between the mechanical properties and geometry and construction of the stents enables to design the stent to fit the patient and it is expected that

  14. Mechanical Properties Of Large Sodium Iodide Crystals

    NASA Technical Reports Server (NTRS)

    Lee, Henry M.

    1988-01-01

    Report presents data on mechanical properties of large crystals of thallium-doped sodium iodide. Five specimens in shape of circular flat plates subjected to mechanical tests. Presents test results for each specimen as plots of differential pressure versus center displacement and differential pressure versus stress at center. Also tabulates raw data. Test program also developed procedure for screening candidate crystals for gamma-ray sensor. Procedure eliminates potentially weak crystals before installed and ensures material yielding kept to minimum.

  15. Mechanical properties of polygonal carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Huang, Ling; Cao, Dapeng

    2012-08-01

    A group of polygonal carbon nanotubes (P-CNTs) have been designed and their mechanical behavior was investigated by classical molecular dynamics simulations. The research aimed at exploring the effects of structure, temperature, and strain rate on the mechanical properties. The results indicate that the Young's modulus of P-CNTs is lower than those of circumcircle carbon nanotubes (C-CNT). Moreover, with an increase in the number of sides to the polygons, the Young's modulus increases and is much closer to that of C-CNT. The effects of temperature and strain rate on the mechanical properties of P-CNTs show that the higher temperature and slower strain rate result in a lower critical strain and weaker tensile strength. In addition, it was found that the critical strains of P-CNTs are dependent on the tube size. Finally, we used the transition-state theory model to predict the critical strain of P-CNTs at given experimental conditions. It is expected that this work could provide feasible means to manipulate the mechanical properties of novel P-CNTs and facilitate the mechanical application of nanostructures as potential electronic devices.A group of polygonal carbon nanotubes (P-CNTs) have been designed and their mechanical behavior was investigated by classical molecular dynamics simulations. The research aimed at exploring the effects of structure, temperature, and strain rate on the mechanical properties. The results indicate that the Young's modulus of P-CNTs is lower than those of circumcircle carbon nanotubes (C-CNT). Moreover, with an increase in the number of sides to the polygons, the Young's modulus increases and is much closer to that of C-CNT. The effects of temperature and strain rate on the mechanical properties of P-CNTs show that the higher temperature and slower strain rate result in a lower critical strain and weaker tensile strength. In addition, it was found that the critical strains of P-CNTs are dependent on the tube size. Finally, we used the

  16. Laminar Tendon Composites with Enhanced Mechanical Properties

    PubMed Central

    Alberti, Kyle A.; Sun, Jeong-Yun; Illeperuma, Widusha R.; Suo, Zhigang; Xu, Qiaobing

    2015-01-01

    Purpose A strong isotropic material that is both biocompatible and biodegradable is desired for many biomedical applications, including rotator cuff repair, tendon and ligament repair, vascular grafting, among others. Recently, we developed a technique, called “bioskiving” to create novel 2D and 3D constructs from decellularized tendon, using a combination of mechanical sectioning, and layered stacking and rolling. The unidirectionally aligned collagen nanofibers (derived from sections of decellularized tendon) offer good mechanical properties to the constructs compared with those fabricated from reconstituted collagen. Methods In this paper, we studied the effect that several variables have on the mechanical properties of structures fabricated from tendon slices, including crosslinking density and the orientation in which the fibers are stacked. Results We observed that following stacking and crosslinking, the strength of the constructs is significantly improved, with crosslinked sections having an ultimate tens ile strength over 20 times greater than non-crosslinked samples, and a modulus nearly 50 times higher. The mechanism of the mechanical failure mode of the tendon constructs with or without crosslinking was also investigated. Conclusions The strength and fiber organization, combined with the ability to introduce transversely isotropic mechanical properties makes the laminar tendon composites a biocompatiable material that may find future use in a number of biomedical and tissue engineering applications. PMID:25691802

  17. Surface mechanical properties - effects of ion implantation

    NASA Astrophysics Data System (ADS)

    Herman, Herbert

    1981-05-01

    Ion implantation has been used to modify the mechanical properties of a wide range of metals and alloys. The affected properties which have been studied include friction and wear, erosion and fatigue. Both BCC and FCC systems have been examined, with the major effort being directed at the former, due to the strong influence of interstitial implantants on mechanical properties of BCC and because of the industrial utility of these alloys. In seeking the microstructural origins of these sometimes dramatic effects, researchers have employed numerous surface analysis techniques, including backscattering and electron spectroscopy, TEM, SEM, X-ray and Mössbauer analysis and internal friction measurements. The interactions of surface dislocation structures with implantation-induced imperfections, surface alloying, and precipitation phenomena are discussed. A review is given of the current status of activities as represented by a number of research groups.

  18. Mechanical Properties and Failure Mechanisms in Polycrystalline Graphene

    NASA Astrophysics Data System (ADS)

    Gonzalez, Joseph; Perriot, Romain; Oleynik, Ivan

    Large-scale growth of graphene using chemical vapor deposition produces polycrystalline material containing grain boundaries. Recent experiments demonstrate that polycrystalline graphene is nearly as strong as pristine. In this work, the mechanical properties of bi-crystal and polycrystalline graphene samples are investigated by simulating nano-indentation of a circular membrane using classical molecular dynamics and a novel Screened Environment Dependent Reactive Bond Order (SED-REBO) potential. The failure mechanisms and crack propagation in graphene samples containing grain boundaries are also discussed.

  19. Isotropic microscale mechanical properties of coral skeletons

    PubMed Central

    Pasquini, Luca; Molinari, Alan; Fantazzini, Paola; Dauphen, Yannicke; Cuif, Jean-Pierre; Levy, Oren; Dubinsky, Zvy; Caroselli, Erik; Prada, Fiorella; Goffredo, Stefano; Di Giosia, Matteo; Reggi, Michela; Falini, Giuseppe

    2015-01-01

    Scleractinian corals are a major source of biogenic calcium carbonate, yet the relationship between their skeletal microstructure and mechanical properties has been scarcely studied. In this work, the skeletons of two coral species: solitary Balanophyllia europaea and colonial Stylophora pistillata, were investigated by nanoindentation. The hardness HIT and Young's modulus EIT were determined from the analysis of several load–depth data on two perpendicular sections of the skeletons: longitudinal (parallel to the main growth axis) and transverse. Within the experimental and statistical uncertainty, the average values of the mechanical parameters are independent on the section's orientation. The hydration state of the skeletons did not affect the mechanical properties. The measured values, EIT in the 76–77 GPa range, and HIT in the 4.9–5.1 GPa range, are close to the ones expected for polycrystalline pure aragonite. Notably, a small difference in HIT is observed between the species. Different from corals, single-crystal aragonite and the nacreous layer of the seashell Atrina rigida exhibit clearly orientation-dependent mechanical properties. The homogeneous and isotropic mechanical behaviour of the coral skeletons at the microscale is correlated with the microstructure, observed by electron microscopy and atomic force microscopy, and with the X-ray diffraction patterns of the longitudinal and transverse sections. PMID:25977958

  20. Improvement of mechanical properties of glass substrates

    NASA Astrophysics Data System (ADS)

    Karbay, Ismail Hakki Cengizhan; Budakoglu, Refika; Zayim, Esra Ozkan

    2015-12-01

    This paper aims to enhance the mechanical and optical properties of glass substrates with thin films by the sol-gel method. TiO2-SiO2 binary system and Ta2O5 were deposited on glass substrates with high transparency. Ring-on-ring flexure and scratch tests were the main mechanical characterization tests. Herein, we report that the thin films can be used to enhance the mechanical properties of the glass substrates efficiently and effectively. TiO2-SiO2 binary system shows more than two times and Ta2O5 thin films show nearly three times better ultimate strength in the ring-on-ring flexure test. Besides, Ta2O5 thin film samples show superior scratch resistance. Additionally, the finite element method was also used to check the conformity in the application of mechanical properties of composite materials. It is also worth noting that, the finite element method can be used to accurately analyze the mechanical stability of composite materials. The use of the finite element method can reduce the total number of experimental trials without losing reliability.

  1. Mechanical properties of additively manufactured octagonal honeycombs.

    PubMed

    Hedayati, R; Sadighi, M; Mohammadi-Aghdam, M; Zadpoor, A A

    2016-12-01

    Honeycomb structures have found numerous applications as structural and biomedical materials due to their favourable properties such as low weight, high stiffness, and porosity. Application of additive manufacturing and 3D printing techniques allows for manufacturing of honeycombs with arbitrary shape and wall thickness, opening the way for optimizing the mechanical and physical properties for specific applications. In this study, the mechanical properties of honeycomb structures with a new geometry, called octagonal honeycomb, were investigated using analytical, numerical, and experimental approaches. An additive manufacturing technique, namely fused deposition modelling, was used to fabricate the honeycomb from polylactic acid (PLA). The honeycombs structures were then mechanically tested under compression and the mechanical properties of the structures were determined. In addition, the Euler-Bernoulli and Timoshenko beam theories were used for deriving analytical relationships for elastic modulus, yield stress, Poisson's ratio, and buckling stress of this new design of honeycomb structures. Finite element models were also created to analyse the mechanical behaviour of the honeycombs computationally. The analytical solutions obtained using Timoshenko beam theory were close to computational results in terms of elastic modulus, Poisson's ratio and yield stress, especially for relative densities smaller than 25%. The analytical solutions based on the Timoshenko analytical solution and the computational results were in good agreement with experimental observations. Finally, the elastic properties of the proposed honeycomb structure were compared to those of other honeycomb structures such as square, triangular, hexagonal, mixed, diamond, and Kagome. The octagonal honeycomb showed yield stress and elastic modulus values very close to those of regular hexagonal honeycombs and lower than the other considered honeycombs. PMID:27612831

  2. Mechanical Properties of Polymer Nano-composites

    NASA Astrophysics Data System (ADS)

    Srivastava, Iti

    Thermoset polymer composites are increasingly important in high-performance engineering industries due to their light-weight and high specific strength, finding cutting-edge applications such as aircraft fuselage material and automobile parts. Epoxy is the most widely employed thermoset polymer, but is brittle due to extensive cross-linking and notch sensitivity, necessitating mechanical property studies especially fracture toughness and fatigue resistance, to ameliorate the low crack resistance. Towards this end, various nano and micro fillers have been used with epoxy to form composite materials. Particularly for nano-fillers, the 1-100 nm scale dimensions lead to fascinating mechanical properties, oftentimes proving superior to the epoxy matrix. The chemical nature, topology, mechanical properties and geometry of the nano-fillers have a profound influence on nano-composite behavior and hence are studied in the context of enhancing properties and understanding reinforcement mechanisms in polymer matrix nano-composites. Using carbon nanotubes (CNTs) as polymer filler, uniquely results in both increased stiffness as well as toughness, leading to extensive research on their applications. Though CNTs-polymer nano-composites offer better mechanical properties, at high stress amplitude their fatigue resistance is lost. In this work covalent functionalization of CNTs has been found to have a profound impact on mechanical properties of the CNT-epoxy nano-composite. Amine treated CNTs were found to give rise to effective fatigue resistance throughout the whole range of stress intensity factor, in addition to significantly enhancing fracture toughness, ductility, Young's modulus and average hardness of the nano-composite by factors of 57%, 60%, 30% and 45% respectively over the matrix as a result of diminished localized cross-linking. Graphene, a one-atom-thick sheet of atoms is a carbon allotrope, which has garnered significant attention of the scientific community and is

  3. Food mechanical properties and dietary ecology.

    PubMed

    Berthaume, Michael A

    2016-01-01

    Interdisciplinary research has benefitted the fields of anthropology and engineering for decades: a classic example being the application of material science to the field of feeding biomechanics. However, after decades of research, discordances have developed in how mechanical properties are defined, measured, calculated, and used due to disharmonies between and within fields. This is highlighted by "toughness," or energy release rate, the comparison of incomparable tests (i.e., the scissors and wedge tests), and the comparison of incomparable metrics (i.e., the stress and displacement-limited indices). Furthermore, while material scientists report on a myriad of mechanical properties, it is common for feeding biomechanics studies to report on just one (energy release rate) or two (energy release rate and Young's modulus), which may or may not be the most appropriate for understanding feeding mechanics. Here, I review portions of materials science important to feeding biomechanists, discussing some of the basic assumptions, tests, and measurements. Next, I provide an overview of what is mechanically important during feeding, and discuss the application of mechanical property tests to feeding biomechanics. I also explain how 1) toughness measures gathered with the scissors, wedge, razor, and/or punch and die tests on non-linearly elastic brittle materials are not mechanical properties, 2) scissors and wedge tests are not comparable and 3) the stress and displacement-limited indices are not comparable. Finally, I discuss what data gathered thus far can be best used for, and discuss the future of the field, urging researchers to challenge underlying assumptions in currently used methods to gain a better understanding between primate masticatory morphology and diet. PMID:26808100

  4. Microstructure and Mechanical Properties of Porous Mullite

    NASA Astrophysics Data System (ADS)

    Hsiung, Chwan-Hai Harold

    Mullite (3 Al2O3 : 2 SiO2) is a technologically important ceramic due to its thermal stability, corrosion resistance, and mechanical robustness. One variant, porous acicular mullite (ACM), has a unique needle-like microstructure and is the material platform for The Dow Chemical Company's diesel particulate filter AERIFY(TM). The investigation described herein focuses on the microstructure-mechanical property relationships in acicular mullites as well as those with traditional porous microstructures with the goal of illuminating the critical factors in determining their modulus, strength, and toughness. Mullites with traditional pore morphologies were made to serve as references via slipcasting of a kaolinite-alumina-starch slurry. The starch was burned out to leave behind a pore network, and the calcined body was then reaction-sintered at 1600C to form mullite. The samples had porosities of approximately 60%. Pore size and shape were altered by using different starch templates, and pore size was found to influence the stiffness and toughness. The ACM microstructure was varied along three parameters: total porosity, pore size, and needle size. Total porosity was found to dominate the mechanical behavior of ACM, while increases in needle and pore size increased the toughness at lower porosities. ACM was found to have much improved (˜130%) mechanical properties relative to its non-acicular counterpart at the same porosity. A second set of investigations studied the role of the intergranular glassy phase which wets the needle intersections of ACM. Removal of the glassy phase via an HF etch reduced the mechanical properties by ˜30%, highlighting the intergranular phase's importance to the enhanced mechanical properties of ACM. The composition of the glassy phase was altered by doping the ACM precursor with magnesium and neodymium. Magnesium doping resulted in ACM with greatly reduced fracture strength and toughness. Studies showed that the mechanical properties of the

  5. Mechanical Properties of Fe-Ni Meteorites

    NASA Astrophysics Data System (ADS)

    Roberta, Mulford; El Dasher, B.

    2010-10-01

    Iron-nickel meteorites exhibit a unique lamellar microstructure, Widmanstatten patterns, consisting of small regions with steep-iron-nickel composition gradients.1,2 The microstructure arises as a result of extremely slow cooling in a planetary core or other large mass. Mechanical properties of these structures have been investigated using microindentation, x-ray fluorescence, and EBSD. Observation of local mechanical properties in these highly structured materials supplements bulk measurements, which can exhibit large variation in dynamic properties, even within a single sample. 3 Accurate mechanical properties for meteorites may enable better modeling of planetary cores, the likely origin of these objects. Appropriate values for strength are important in impact and crater modeling and in understanding the consequences of observed impacts on planetary crusts. Previous studies of the mechanical properties of a typical iron-nickel meteorite, a Diablo Canyon specimen, indicated that the strength of the composite was higher by almost an order of magnitude than values obtained from laboratory-prepared specimens.4 This was ascribed to the extreme work-hardening evident in the EBSD measurements. This particular specimen exhibited only residual Widmanstatten structures, and may have been heated and deformed during its traverse of the atmosphere. Additional specimens from the Canyon Diablo fall (type IAB, coarse octahedrite) and examples from the Muonionalusta meteorite and Gibeon fall ( both IVA, fine octahedrite), have been examined to establish a range of error on the previously measured yield, to determine the extent to which deformation upon re-entry contributes to yield, and to establish the degree to which the strength varies as a function of microstructure. 1. A. Christiansen, et.al., Physica Scripta, 29 94-96 (1984.) 2. Goldstein and Ogilvie, Geochim Cosmochim Acta, 29 893-925 (1965.) 3. M. D. Furnish, M.B. Boslough, G.T. Gray II, and J.L. Remo, Int. J. Impact Eng

  6. Mechanical properties of crosslinked polymer coatings

    NASA Technical Reports Server (NTRS)

    Csernica, Jeffrey

    1994-01-01

    The objectives of this experiment are to: fabricate and test thin films to explore relations between a polymer's structure and its mechanical properties; expose students to testing methods for hardness and impact energy that are simple to perform and which have results that are easy to comprehend; show importance of polymer properties in materials that students frequently encounter; illustrate a system which displays a tradeoff between strength and impact resistance, the combination of which would need to be optimized for a particular application; and to expose students to coatings technology and testing.

  7. Mechanical properties of intra-ocular lenses

    NASA Astrophysics Data System (ADS)

    Ehrmann, Klaus; Kim, Eon; Parel, Jean-Marie

    2008-02-01

    Cataract surgery usually involves the replacement of the natural crystalline lens with a rigid or foldable intraocular lens to restore clear vision for the patient. While great efforts have been placed on optimising the shape and optical characteristics of IOLs, little is know about the mechanical properties of these devices and how they interact with the capsular bag once implanted. Mechanical properties measurements were performed on 8 of the most commonly implanted IOLs using a custom build micro tensometer. Measurement data will be presented for the stiffness of the haptic elements, the buckling resistance of foldable IOLs, the dynamic behaviour of the different lens materials and the axial compressibility. The biggest difference between the lens types was found between one-piece and 3-piece lenses with respect to the flexibility of the haptic elements

  8. Rhenium Mechanical Properties and Joining Technology

    NASA Technical Reports Server (NTRS)

    Reed, Brian D.; Biaglow, James A.

    1996-01-01

    Iridium-coated rhenium (Ir/Re) provides thermal margin for high performance and long life radiation cooled rockets. Two issues that have arisen in the development of flight Ir/Re engines are the sparsity of rhenium (Re) mechanical property data (particularly at high temperatures) required for engineering design, and the inability to directly electron beam weld Re chambers to C103 nozzle skirts. To address these issues, a Re mechanical property database is being established and techniques for creating Re/C103 transition joints are being investigated. This paper discusses the tensile testing results of powder metallurgy Re samples at temperatures from 1370 to 2090 C. Also discussed is the evaluation of Re/C103 transition pieces joined by both, explosive and diffusion bonding. Finally, the evaluation of full size Re transition pieces, joined by inertia welding, as well as explosive and diffusion bonding, is detailed.

  9. Determinants of the mechanical properties of bones

    NASA Technical Reports Server (NTRS)

    Martin, R. B.

    1991-01-01

    The mechanical properties of bones are governed by the same principles as those of man-made load-bearing structures, but the organism is able to adapt its bone structure to changes in skeletal loading. In this overview of the determinants of the strength and stiffness of bone, a continuum approach has been taken, in which the behavior of a macroscopic structure depends on its shape and size, and on the mechanical properties of the material within. The latter are assumed to depend on the composition (porosity and mineralization) and organization (trabecular or cortical bone architecture, collagen fiber orientation, fatigue damage) of the bone. The effects of each of these factors are reviewed. Also, the possible means of non-invasively estimating the strength or other mechanical properties of a bone are reviewed, including quantitative computed tomography, photon absorptiometry, and ultrasonic measurements. The best estimates of strength have been obtained with photon absorptiometry and computed tomography, which at best are capable of accounting for 90% of the strength variability in a simple in vitro test, but results from different laboratories have been highly variable.

  10. Tensile mechanical properties of human forearm tendons.

    PubMed

    Weber, J F; Agur, A M R; Fattah, A Y; Gordon, K D; Oliver, M L

    2015-09-01

    Previous studies of the mechanical properties of tendons in the upper limb have used embalmed specimens or sub-optimal methods of measurement. The aim of this study was to determine the biomechanical properties of all tendons from five fresh frozen cadaveric forearms using updated methodology. The cross-sectional area of tendons was accurately measured using a laser reflectance system. Tensile testing was done in a precision servo-hydraulic device with cryo-clamp fixation. We determined that the cross-sectional area of some tendons is variable and directly influences the calculated material properties; visual estimation of this is unreliable. Data trends illustrate that digital extensor tendons possess the greatest tensile strength and a higher Young's modulus than other tendon types. PMID:25940499

  11. Obtaining railpad properties via dynamic mechanical analysis

    NASA Astrophysics Data System (ADS)

    Oregui, M.; de Man, A.; Woldekidan, M. F.; Li, Z.; Dollevoet, R.

    2016-02-01

    In this paper, we propose combining dynamic mechanical analysis (DMA) and the time-temperature superposition principle to determine various railpad dynamic properties. Having accurate information regarding the dynamic properties of a railpad is a fundamental requirement for designing tracks and understanding track deterioration. By testing three different railpad types, we demonstrate that the dynamic behavior of railpads over a wide frequency range can be successfully obtained under different preloads and temperatures if time-temperature superposition can be applied. To investigate railpad aging, worn railpads taken from a mainline in the Netherlands are tested. In this case, worn railpads are softer and possess a lower damping capacity than new railpads. In addition to performing these measurements, a Prony series material model is proposed to reproduce the dynamic behavior of railpads. The Prony series model is in good agreement with the measurements. Measured railpad dynamic properties and the corresponding Prony series numerical model provide valuable information for track design and modeling.

  12. Database of Mechanical Properties of Textile Composites

    NASA Technical Reports Server (NTRS)

    Delbrey, Jerry

    1996-01-01

    This report describes the approach followed to develop a database for mechanical properties of textile composites. The data in this database is assembled from NASA Advanced Composites Technology (ACT) programs and from data in the public domain. This database meets the data documentation requirements of MIL-HDBK-17, Section 8.1.2, which describes in detail the type and amount of information needed to completely document composite material properties. The database focuses on mechanical properties of textile composite. Properties are available for a range of parameters such as direction, fiber architecture, materials, environmental condition, and failure mode. The composite materials in the database contain innovative textile architectures such as the braided, woven, and knitted materials evaluated under the NASA ACT programs. In summary, the database contains results for approximately 3500 coupon level tests, for ten different fiber/resin combinations, and seven different textile architectures. It also includes a limited amount of prepreg tape composites data from ACT programs where side-by-side comparisons were made.

  13. Improved Pharmacological and Structural Properties of HIV Fusion Inhibitor AP3 over Enfuvirtide: Highlighting Advantages of Artificial Peptide Strategy

    DOE PAGESBeta

    Zhu, Xiaojie; Zhu, Yun; Ye, Sheng; Wang, Qian; Xu, Wei; Su, Shan; Sun, Zhiwu; Yu, Fei; Liu, Qi; Wang, Chao; et al

    2015-08-19

    Enfuvirtide (T20), is the first HIV fusion inhibitor approved for treatment of HIV/AIDS patients who fail to respond to the current antiretroviral drugs. However, its clinical application is limited because of short half-life, drug resistance and cross-reactivity with the preexisting antibodies in HIV-infected patients. Using an artificial peptide strategy, we designed a peptide with non-native protein sequence, AP3, which exhibited potent antiviral activity against a broad spectrum of HIV-1 strains, including those resistant to T20, and had remarkably longer in vivo half-life than T20. While the preexisting antibodies in HIV-infected patients significantly suppressed T20’s antiviral activity, these antibodies neither recognizedmore » AP3, nor attenuated its anti-HIV-1 activity. Structurally different from T20, AP3 could fold into single-helix and interact with gp41 NHR. The two residues, Met and Thr, at the N-terminus of AP3 form a hook-like structure to stabilize interaction between AP3 and NHR helices. Therefore, AP3 has potential for further development as a new HIV fusion inhibitor with improved antiviral efficacy, resistance profile and pharmacological properties over enfuvirtide. Meanwhile, this study highlighted the advantages of artificially designed peptides, and confirmed that this strategy could be used in developing artificial peptide-based viral fusion inhibitors against HIV and other enveloped viruses.« less

  14. Different mechanical properties in Seldinger guide wires

    PubMed Central

    Schummer, Wolfram

    2015-01-01

    Background and Aims: Most central venous catheters are placed using Seldinger guide wires. EN ISO 11070 is the guideline for testing guide wire flexing performance and tensile strength, and we can safely assume that guide wires in use meet these requirements. Unfortunately, EN ISO 11070 guidelines do not reflect the clinical requirements and we continue to see mechanical failures and their associated complications. Material and Methods: This in vitro study was performed in an accredited laboratory. With regard to flexing, we: (1) Established the minimum flexing performance needed to meet clinical requirements, (2) developed flexing performance tests which mimic clinical requirement, and (3) evaluated the mechanical properties of various guide wires relative to these requirements. With regard to tensile strength, we used the testing method prescribed in ISO 11070, but did not end the test at 5 Newton (N). We continued until the guide wire was damaged, or we reached maximum tractive force. We then did a wire-to-wire comparison. We examined two basic wire constructions, monofil and core and coil. Results: Tensile strength: All wires tested, except one, met EN ISO 11070 requirements for 5 N tensile strength. The mean of the wire types tested ranged from 15.06 N to 257.76 N. Flexing performance: None of the wires kinked. The monofil had no evidence of bending. Two core/coil wires displayed minor bending (angle 1.5°). All other wires displayed bending angles between 22.5° and 43.0°. Conclusion: We recommend that: (1) Clinicians use guide wires with high-end mechanical properties, (2) EN ISO 11070 incorporate our flexing test into their testing method, raise the flexing requirement to kink-proof, (3) and raise the tensile strength requirement to a minimum of 30 N, and (3) all manufacturers and suppliers be required to display mechanical properties of all guide wire, and guide wire kits sold. PMID:26702209

  15. Machining as a mechanical property test revisited

    NASA Astrophysics Data System (ADS)

    Smith, David L.

    There is much need for data on mechanical behavior of metals at high strains and strain rates. This need is dictated by modeling of processes like forming and machining, wherein the material in the deformation zone is subjected to severe deformation conditions atypical of conventional material property tests such as tension and torsion. Accurate flow stress data is an essential input for robust prediction of process outputs. Similar requirements arise from applications in high speed ballistic penetration and design of materials for armor. Since the deformation zone in cutting of metals is characterized by unique and extreme combinations of strain, strain rate and temperature, an opportunity exists for using plane-strain cutting as a mechanical property test for measuring flow properties of metals. The feasibility of using plane-strain cutting to measure flow properties of metals is revisited in the light of recent data showing controllability of the deformation conditions in chip formation by systematic variation of process input parameters. A method is outlined as to how the deformation conditions can be varied by changing the process parameters. The method is applied to cutting of commercially pure copper (FCC), iron (BCC) and zinc (HCP). Forces and chip geometries are measured, in conjunction with particle image velocimetry characterization of the deformation using high speed image sequences. The flow stresses are estimated from these measurements. The measured flow stress and its dependence on strain are shown to agree well with prior measurements of these parameters using conventional tests, and flow stress inferred from hardness characterization. The method is also demonstrated to be able to measure properties of metals that recrystallize at room temperature (zinc), wherein quasi-static tests predict much lower strength. Sources of variability and uncertainty in the application of this measurement technique are discussed. Future work in the context of further

  16. Mechanical properties of stapedial annular ligament.

    PubMed

    Gan, Rong Z; Yang, Fan; Zhang, Xiangming; Nakmali, Don

    2011-04-01

    Stapedial annular ligament (SAL) provides a sealed but mobile boundary between the stapes footplate and oval window bony wall. Mechanical properties of the SAL affect the transmission of ossicular movement into the cochlea in sound conduction. However, the mechanical properties of this tissue have never been investigated due to its complexity. In this paper, we report measurement of the viscoelastic properties of SAL on human cadaver temporal bones using a micro-material testing system with digital image correlation analysis. The measured load-deformation relations of SAL samples were converted into shear stress-shear strain relationship, stress relaxation function, and ultimate shear stress and shear strain of the SAL. The hyperelastic Ogden model was used to describe constitutive behavior of the SAL and a 3D finite element model of the experimental setup with SAL was created for assessing the effects of loading variation and measurement errors on results. The study demonstrates that the human SAL is a typical viscoelastic material with hysteresis, nonlinear stress-strain relationship and stress relaxation function. The shear modulus changes from 3.6 to 220 kPa when the shear stress increases from 2 to 140 kPa. These results provide useful information on quasi-static behavior of the SAL. PMID:21112232

  17. Aggregate of nanoparticles: rheological and mechanical properties

    NASA Astrophysics Data System (ADS)

    Wang, Yu; Wu, Xiaojun; Yang, Wei; Zhai, Yuanming; Xie, Banghu; Yang, Mingbo

    2011-12-01

    The understanding of the rheological and mechanical properties of nanoparticle aggregates is important for the application of nanofillers in nanocompoistes. In this work, we report a rheological study on the rheological and mechanical properties of nano-silica agglomerates in the form of gel network mainly constructed by hydrogen bonds. The elastic model for rubber is modified to analyze the elastic behavior of the agglomerates. By this modified elastic model, the size of the network mesh can be estimated by the elastic modulus of the network which can be easily obtained by rheology. The stress to destroy the aggregates, i.e., the yield stress ( σ y ), and the elastic modulus ( G') of the network are found to be depended on the concentration of nano-silica ( ϕ, wt.%) with the power of 4.02 and 3.83, respectively. Via this concentration dependent behavior, we can extrapolate two important mechanical parameters for the agglomerates in a dense packing state ( ϕ = 1): the shear modulus and the yield stress. Under large deformation (continuous shear flow), the network structure of the aggregates will experience destruction and reconstruction, which gives rise to fluctuations in the viscosity and a shear-thinning behavior.

  18. Osteonal lamellae elementary units: lamellar microstructure, curvature and mechanical properties.

    PubMed

    Faingold, Anna; Cohen, Sidney R; Reznikov, Natalie; Wagner, H Daniel

    2013-04-01

    The mechanical and structural properties of the sublayers of osteonal lamellae were studied. Young's modulus (E) of adjacent individual lamellae was measured by nanoindentation of parallel slices every 1-3 μm, in planes parallel and perpendicular to the osteon axis (OA). In planes parallel to the OA, the modulus of a lamella could vary significantly between sequential slices. Significant modulus variations were also sometimes found on opposing sides of the osteonal canal for the same lamella. These results are rationalized by considerations involving the microstructural organization of the collagen fibrils in the lamellae. Scanning electron microscope imaging of freeze fractured surfaces revealed that the substructure of a single lamella can vary significantly on the opposing sides of the osteonal axis. Using a serial surface view method, parallel planes were exposed every 8-10 nm using a dual-beam microscope. Analysis of the orientations of fibrils revealed that the structure is rotated plywood like, consisting of unidirectional sublayers of fibrils of several orientations, with occasional randomly oriented sublayers. The dependence of the measured mechanical properties of the lamellae on the indentation location may be explained by the observed structure, as well as by the curvature of the osteonal lamellae through simple geometrical-structural considerations. Mechanical advantages arising from the curved laminate structure are discussed. PMID:23220032

  19. Polymer nanocomposites: permeability, chain dynamics, mechanical properties

    NASA Astrophysics Data System (ADS)

    Sahu, Laxmi

    2005-03-01

    Polymer nanocomposites based on dispersion of surfactant treated expandable smectite clays such as montmorillonite layered silicates (MLS) have shown promise as organic-inorganic hybrids with the potential to improve barrier properties. Separately, flexible displays based on plastic substrates have reduced lifetimes tied to the low barrier properties. While there has been a general attribution of improved barrier properties to the tortuous path, this does not consider the influence the introduction of a secondary filler has on the morphology of the host polymer. Here we examine the influence of MLS nanoplatelets on the barrier properties and chain dynamics of polymers. We investigate the potential for host polymer modification by comparing two crystallizable polymers nylon and PET and resulting well dispersed nanocomposites. We study mechanical, cyclic fatigue and permeability of films. Permeability of the biaxially stretched film and when the film undergoes fatigue of 50 and 10000 cycles are also measured. Chain dynamics were modeled based on the Burger model fit to creep-recovery data. A systematic approach to predict the permeability considering amorphous, crystalline and MLS content and comparison with experimental values were done. We also conducted water absorption measurements to highlight the water absorption differences in the two polymers. Dimensional stability of PET was studied by measuring coefficient of thermal expansion of thin film on Si substrate by ellipsometry method.

  20. PICA Variants with Improved Mechanical Properties

    NASA Technical Reports Server (NTRS)

    Thornton, Jeremy; Ghandehari, Ehson M.; Fan, Wenhong; Stackpoole, Margaret; Chavez-Garcia, Jose

    2011-01-01

    Phenolic Impregnated Carbon Ablator (PICA) is a member of the family of Lightweight Ceramic Ablators (LCAs) and was developed at NASA Ames Research Center as a thermal protection system (TPS) material for the Stardust mission probe that entered the Earth s atmosphere faster than any other probe or vehicle to date. PICA, carbon fiberform base and phenolic polymer, shows excellent thermal insulative properties at heating rates from about 250 W/sq cm to 1000 W/sq cm. The density of standard PICA - 0.26 g/cu cm to 0.28 g/cu cm - can be changed by changing the concentration of the phenolic resin. By adding polymers to the phenolic resin before curing it is possible to significantly improve the mechanical properties of PICA without significantly increasing the density.

  1. Electrical and Mechanical Properties of Graphene

    NASA Astrophysics Data System (ADS)

    Bao, Wenzhong

    Graphene is an exciting new atomically-thin two-dimensional (2D) system of carbon atoms organized in a hexagonal lattice structure. This "wonder material" has been extensively studied in the last few years since it's first isolation in 2004. Its rapid rise to popularity in scientific and technological communities can be attributed to a number of its exceptional properties. In this thesis I will present several topics including fabrication of graphene devices, electrical and mechanical properties of graphene. I will start with a brief introduction of electronic transport in nanosclae system including quantum Hall effect, followed by a discussion of fundamental electrical and mechanical properties of graphene. Next I will describe how graphene devices are produced: from the famous "mechnical exfoliation" to our innovative "scratching exfoliation" method, together with the traditional lithography fabrication for graphene devices. We also developed a lithography-free technique for making electrical contacts to suspended graphene devices. Most of the suspended devices presented in this thesis are fabricated by this technique. Graphene has remarkable electrical properties thanks to its crystal and band structures. In Chapter 3, I will first focus on proximity-induced superconductivity in graphene Josephson transistors. In this section we investigate electronic transport in single layer graphene coupled to superconducting electrodes. We observe significant suppression in the critical current I c and large variation in the product IcR n in comparison to theoretic prediction; both phenomena can be satisfactorily accounted for by premature switching in underdamped Josephson junctions. Another focus of our studies is quantum Hall effect and many body physics in graphene in suspended bilayer and trilayer graphene. We demonstrate that symmetry breaking of the first 3 Landau levels and fractional quantum Hall states are observed in both bilayer and trilayer suspended graphene

  2. Mechanical Properties from PBX 9501 Pressing Study

    NASA Astrophysics Data System (ADS)

    Graff Thompson, Darla; Wright, Walter J.

    2004-07-01

    A PBX 9501 pressing study was conducted by researchers in ESA-WMM, LANL, to identify the hydrostatic pressing parameters most important in fabricating high-density parts with uniform density. In this study, 31 charges were pressed using a full permutation of six pressing parameters. Five charges from the set of 31 were selected for an evaluation of their mechanical properties, specifically uniaxial compression and tension. Charges were selected to 1) span the density range of the study, and 2) allow two direct comparisons of pressing parameters independent of bulk density (density has a well-established affect on some material properties). Three PBX 9501 charges pressed isostatically at Pantex Plant in Amarillo, TX were also included in the study. The tensile properties of the 8 charges varied significantly. Careful evaluation of the results suggests that an increase in pressing temperature may correlate with an increase in tensile stress (strength) and a decrease in strain (ductility). Trends in compression exist but are less pronounced. In an effort to explore the relationship between pressing temperature and tensile strength, four sheets of Estane polymer (a component of the PBX 9501 binder) were compression molded at 70, 90, 110 and 130°C. The tensile strength of Estane was observed to increase by a factor of nearly 20 when the molding temperature was increased from 70 to 90°C (strength increase was negligible beyond 90°C). We present an outline of ongoing work that will irrefutably quantify the mechanical property affects of both pressing temperature and dwell time on PBX 9501.(LA-UR 03-4842).

  3. Mechanical properties of phosphorene nanoribbons and oxides

    SciTech Connect

    Hao, Feng; Chen, Xi

    2015-12-21

    Mechanical properties of phosphorene nanoribbons and oxides are investigated by using density functional theory. It is found that the ideal strength of nanoribbon decreases in comparison with that of 2D phosphorene. The Young's modulus of armchair nanoribbon has a remarkable size effect because of the edge relaxations. The analysis of the stress-strain relation indicates that, owing to chemisorbed oxygen atoms, the ideal strength and Young's modulus of 2D phosphorene oxide are greatly reduced along the zigzag direction, especially upon high oxidation ratios. In addition, strain and oxidation have significant impacts on phonon dispersion.

  4. Mechanical properties of low dimensional materials

    NASA Astrophysics Data System (ADS)

    Saini, Deepika

    Recent advances in low dimensional materials (LDMs) have paved the way for unprecedented technological advancements. The drive to reduce the dimensions of electronics has compelled researchers to devise newer techniques to not only synthesize novel materials, but also tailor their properties. Although micro and nanomaterials have shown phenomenal electronic properties, their mechanical robustness and a thorough understanding of their structure-property relationship are critical for their use in practical applications. However, the challenges in probing these mechanical properties dramatically increase as their dimensions shrink, rendering the commonly used techniques inadequate. This dissertation focuses on developing techniques for accurate determination of elastic modulus of LDMs and their mechanical responses under tensile and shear stresses. Fibers with micron-sized diameters continuously undergo tensile and shear deformations through many phases of their processing and applications. Significant attention has been given to their tensile response and their structure-tensile properties relations are well understood, but the same cannot be said about their shear responses or the structure-shear properties. This is partly due to the lack of appropriate instruments that are capable of performing direct shear measurements. In an attempt to fill this void, this dissertation describes the design of an inexpensive tabletop instrument, referred to as the twister, which can measure the shear modulus (G) and other longitudinal shear properties of micron-sized individual fibers. An automated system applies a pre-determined twist to the fiber sample and measures the resulting torque using a sensitive optical detector. The accuracy of the instrument was verified by measuring G for high purity copper and tungsten fibers. Two industrially important fibers, IM7 carbon fiber and KevlarRTM 119, were found to have G = 17 and 2.4 GPa, respectively. In addition to measuring the shear

  5. Linking properties to microstructure through multiresolution mechanics

    NASA Astrophysics Data System (ADS)

    McVeigh, Cahal James

    The macroscale mechanical and physical properties of materials are inherently linked to the underlying microstructure. Traditional continuum mechanics theories have focused on approximating the heterogeneous microstructure as a continuum, which is conducive to a partial differential equation mathematical description. Although this makes large scale simulation of material much more efficient than modeling the detailed microstructure, the relationship between microstructure and macroscale properties becomes unclear. In order to perform computational materials design, material models must clearly relate the key underlying microstructural parameters (cause) to macroscale properties (effect). In this thesis, microstructure evolution and instability events are related to macroscale mechanical properties through a new multiresolution continuum analysis approach. The multiresolution nature of this theory allows prediction of the evolving magnitude and scale of deformation as a direct function of the changing microstructure. This is achieved via a two-pronged approach: (a) Constitutive models which track evolving microstructure are developed and calibrated to direct numerical simulations (DNS) of the microstructure. (b) The conventional homogenized continuum equations of motion are extended via a virtual power approach to include extra coupled microscale stresses and stress couples which are active at each characteristic length scale within the microstructure. The multiresolution approach is applied to model the fracture toughness of a cemented carbide, failure of a steel alloy under quasi-static loading conditions and the initiation and velocity of adiabatic shear bands under high speed dynamic loading. In each case the multiresolution analysis predicts the important scale effects which control the macroscale material response. The strain fields predicted in the multiresolution continuum analyses compare well to those observed in direct numerical simulations of the

  6. Mechanical Properties of Nanoceramic Silicon Carbide

    NASA Astrophysics Data System (ADS)

    Ojo, Ipidapo; Abunaemeh, Malek; Smith, Cydale; Muntele, Claudiu; Ila, Daryush

    2009-03-01

    Generation IV nuclear reactors will use the TRISO fuels, a type of micro fuel particle. It consists of a fuel kernel coated with four layers of isotropic material. One of the materials considered for these layers is silicon carbide ceramic. This lightweight material can maintain chemical and dimensional stability in adverse environments at very high temperatures up to 3000 C, and it is chemically inert. It is widely used as a semiconductor material in electronics because of its high thermo conductivity, high electric field break down strength, and high maximum current density, which makes it more desirable than silicon. Silicon carbide has a very low coefficient of thermal expansion and has no phase transition that would discontinue its thermal expansion. At the Center for Irradiation of Materials (C.I.M.) we are developing a new fabrication process for nanopowdered silicon carbide for TRISO fuel coating purposes. We also study the mechanical properties of the material produced. Among the different test being performed are particle induced X-ray emission (PIXE) an Rutherford backscattering spectroscopy (RBS). The mechanical properties of interest are hardness (measured by Vickers Hardness machine), toughness (measured by the Anstis equation, KIC= 1.6 x 10-2(E/H)^1/2(P/C0^3/2, where P=load, C0=crack length, E=Young's modulus and H=Vickers Hardness), tensile strength and flexural strength (measured by a three point bend test). Results will be presented during the meeting.

  7. Mechanical properties of 3D ceramic nanolattices

    NASA Astrophysics Data System (ADS)

    Meza, Lucas

    Developments in advanced nanoscale fabrication techniques have allowed for the creation of 3-dimensional hierarchical structural meta-materials that can be designed with arbitrary geometry. These structures can be made on length scales spanning multiple orders of magnitude, from tens of nanometers to hundreds of microns. The smallest features are controllable on length scales where materials have been shown to exhibit size effects in their mechanical properties. Combining novel nanoscale mechanical properties with a 3-dimensional architecture enables the creation of new classes of materials with tunable and unprecedented mechanical properties. We present the fabrication and mechanical deformation of hollow tube alumina nanolattices that were fabricated using two-photon lithography direct laser writing (DLW), atomic layer deposition (ALD), and oxygen plasma etching. Nanolattices were designed in a number of different geometries including octet-truss, octahedron, and 3D Kagome. Additionally, a number of structural parameters were varied including tube wall thickness (t) , tube major axis (a) , and unit cell size (L) . The resulting nanolattices had a range of densities from ρ = 4 to 250 mg/cm3. Uniaxial compression and cyclic loading tests were performed on the nanolattices to obtain the yield strength and modulus. In these tests, a marked change in the deformation response was observed when the wall thickness was reduced below 20nm; thick-walled nanolattices (t>20nm) underwent catastrophic, brittle failure, which transitioned to a gradual, ductile-like deformation as wall thickness was reduced. Thick-walled nanolattices also exhibited no recovery after compression, while thin-walled structures demonstrated notable recovery, with some recovering by 98% after compression to 50% strain and by 80% when compressed to 90% strain. Across all geometries, unit cell sizes, and wall thicknesses, we found a consistent power law relation between strength and modulus with

  8. Modified flax fibers reinforced soy-based composites: mechanical properties and water absorption behavior

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Flax fibers are often used in reinforced composites which have exhibited numerous advantages such as high mechanical properties, low density and biodegradability. On the other hand, the hydrophilic nature of flax fiber is a major problem. In this study, we prepare the soybean oil based composites ...

  9. Mechanical properties of monolayer graphene oxide.

    PubMed

    Suk, Ji Won; Piner, Richard D; An, Jinho; Ruoff, Rodney S

    2010-11-23

    Mechanical properties of ultrathin membranes consisting of one layer, two overlapped layers, and three overlapped layers of graphene oxide platelets were investigated by atomic force microscopy (AFM) imaging in contact mode. In order to evaluate both the elastic modulus and prestress of thin membranes, the AFM measurement was combined with the finite element method (FEM) in a new approach for evaluating the mechanics of ultrathin membranes. Monolayer graphene oxide was found to have a lower effective Young's modulus (207.6 ± 23.4 GPa when a thickness of 0.7 nm is used) as compared to the value reported for "pristine" graphene. The prestress (39.7-76.8 MPa) of the graphene oxide membranes obtained by solution-based deposition was found to be 1 order of magnitude lower than that obtained by others for mechanically cleaved graphene. The novel AFM imaging and FEM-based mapping methods presented here are of general utility for obtaining the elastic modulus and prestress of thin membranes. PMID:20942443

  10. Educational advantage.

    PubMed

    2006-03-01

    What special advantage does JERHRE offer to research ethics education? Empirical research employs concepts and methods for understanding and addressing problems; the methods employed can be generalized to related problems in new contexts. Research published in JERHRE uses concepts and methods designed to understand and solve ethical problems in human research. These tools can be reused by JERHRE's readership as part of their learning and problem solving. Instead of telling scientists, students, ethics committee members and others what they ought to do, educators can use curriculum based on the empirical articles contained in JERHRE to enable learners to solve the particular research-related problems they confront. Each issue of JERHRE publishes curriculum based on articles published therein. The lesson plans are deliberately general so that they can be adapted to the particular learners. PMID:19385863

  11. Educational advantage.

    PubMed

    2006-06-01

    WHAT SPECIAL ADVANTAGE DOES JERHRE offer to research ethics education? Empirical research employs concepts and methods for understanding and addressing problems; the methods employed can be generalized to related problems in new contexts. Research published in JERHRE uses concepts and methods designed to understand and solve ethical problems in human research. These tools can be reused by JERHRE's readership as part of their learning and problem solving. Instead of telling scientists, students, ethics committee members and others what they ought to do, educators can use curriculum based on the empirical articles contained in JERHRE to enable learners to solve the particular research-related problems they confront. Each issue of JERHRE publishes curriculum based on articles published therein. The lesson plans are deliberately general so that they can be adapted to the particular learners. PMID:19385873

  12. Bioinspired Cellular Structures: Additive Manufacturing and Mechanical Properties

    NASA Astrophysics Data System (ADS)

    Stampfl, J.; Pettermann, H. E.; Liska, R.

    Biological materials (e.g., wood, trabecular bone, marine skeletons) rely heavily on the use of cellular architecture, which provides several advantages. (1) The resulting structures can bear the variety of "real life" load spectra using a minimum of a given bulk material, featuring engineering lightweight design principles. (2) The inside of the structures is accessible to body fluids which deliver the required nutrients. (3) Furthermore, cellular architectures can grow organically by adding or removing individual struts or by changing the shape of the constituting elements. All these facts make the use of cellular architectures a reasonable choice for nature. Using additive manufacturing technologies (AMT), it is now possible to fabricate such structures for applications in engineering and biomedicine. In this chapter, we present methods that allow the 3D computational analysis of the mechanical properties of cellular structures with open porosity. Various different cellular architectures including disorder are studied. In order to quantify the influence of architecture, the apparent density is always kept constant. Furthermore, it is shown that how new advanced photopolymers can be used to tailor the mechanical and functional properties of the fabricated structures.

  13. Environmental properties set cell mechanics and morphology

    NASA Astrophysics Data System (ADS)

    Janmey, Paul

    2012-02-01

    Many cell types are sensitive to mechanical signals that are produced either by application of exogenous force to their surfaces, or by the resistance that their surroundings place on forces generated by the cells themselves. Cell morphology, motility, proliferation, and protein expression all change in response to substrate stiffness. Changing the elastic moduli of substrates alters the formation of focal adhesions, the assembly of actin filaments into bundles, and the stability of intermediate filaments. The range of stiffness over which different primary cell types respond can vary over a wide range and generally reflects the elastic modulus of the tissue from which these cells were isolated. Mechanosensing depends on the type of adhesion receptor by which the cell binds, and therefore on both the molecular composition of the extracellular matrix and the nature of its link to the cytoskeleton. Many cell types can alter their own stiffness to match that of the substrate to which they adhere. The maximal elastic modulus that cells such as fibroblasts can attain is similar to that of crosslinked actin networks at the concentrations in the cell cortex. The precise mechanisms of mechanosensing are not well defined, but they presumably require an elastic connection between cell and substrate, mediated by transmembrane proteins. The viscoelastic properties of different extracellular matrices and cytoskeletal elements strongly influence the response of cells to mechanical signals, and the unusual non-linear elasticity of many biopolymer gels, characterized by strain-stiffening, leads to novel mechanisms by which cells alter their stiffness by engagement of molecular motors that produce internal stresses. Cell cortical elasticity is dominated by cytoskeletal polymer networks and can be modulated by internal tension. Simultaneous control of substrate stiffness and adhesive patterns suggests that stiffness sensing occurs on a length scale much larger than single molecular

  14. Evaluation of mechanical properties of esthetic brackets

    PubMed Central

    Umezaki, Eisaku; Komazawa, Daigo; Otsuka, Yuichiro; Suda, Naoto

    2015-01-01

    Plastic brackets, as well as ceramic brackets, are used in various cases since they have excellent esthetics. However, their mechanical properties remain uncertain. The purpose of this study was to determine how deformation and stress distribution in esthetic brackets differ among materials under the same wire load. Using the digital image correlation method, we discovered the following: (1) the strain of the wings of plastic brackets is within 0.2% and that of ceramic and metal brackets is negligible, (2) polycarbonate brackets having a stainless steel slot show significantly smaller displacement than other plastic brackets, and (3) there is a significant difference between plastic brackets and ceramic and stainless steel brackets in terms of the displacement of the bracket wing. PMID:25755677

  15. Mechanical properties of icosahedral virus capsids

    NASA Astrophysics Data System (ADS)

    Vliegenthart, G. A.; Gompper, G.

    2007-12-01

    Virus capsids are self-assembled protein shells in the size range of 10 to 100 nanometers. The shells of DNA-viruses have to sustain large internal pressures while encapsulating and protecting the viral DNA. We employ computer simulations to study the mechanical properties of crystalline shells with icosahedral symmetry that serve as a model for virus capsids. The shells are positioned on a substrate and deformed by a uni-axial force excerted by a small bead. We predict the elastic response for small deformations, and the buckling transitions at large deformations. Both are found to depend strongly on the number N of elementary building blocks (capsomers), and the Föppl-von Kármán number γ which characterizes the relative importance of shear and bending elasticity.

  16. Tension-induced mechanical properties of stanene

    NASA Astrophysics Data System (ADS)

    Tao, Lele; Yang, Chuanghua; Wu, Liyuan; Han, Lihong; Song, Yuxin; Wang, Shumin; Lu, Pengfei

    2016-05-01

    In this paper, elastic properties of stanene under equiaxial or uniaxial tensions along armchair and zigzag directions are investigated by first-principles calculations. The stress-strain relation is calculated and the relaxation of the internal atom positions is analyzed. The high-order elastic constants are calculated by fitting the polynomial expressions. The Young’s modulus and Poisson ratio of the stanene is calculated to be 24.14 N/m and 0.39 N/m, respectively. The stanene exhibits lower Young’s modulus than those of the proceeding group IV elements, which is attributed to the smaller sp2-sp3 bond energy in stanene than those of silicene and germanene. Calculated values of ultimate stresses and strains, second-order elastic constants (SOCEs) and the in-plane Young’s modulus are all positive. It proves that stanene is mechanically stable.

  17. Mechanical Properties of Silicon Carbonitride Thin Films

    NASA Astrophysics Data System (ADS)

    Peng, Xiaofeng; Hu, Xingfang; Wang, Wei; Song, Lixin

    2003-02-01

    Silicon carbonitride thin films were synthesized by reactive rf sputtering a silicon carbide target in nitrogen and argon atmosphere, or sputtering a silicon nitride target in methane and argon atmosphere, respectively. The Nanoindentation technique (Nanoindenter XP system with a continuous stiffness measurement technique) was employed to measure the hardness and elastic modulus of thin films. The effects of sputtering power on the mechanical properties are different for the two SiCN thin films. With increasing sputtering power, the hardness and the elastic modulus decrease for the former but increase for the latter. The tendency is similar to the evolution trend of Si-C bonds in SiCN materials. This reflects that Si-C bonds provide greater hardness for SiCN thin films than Si-N and C-N bonds.

  18. Rationally designing the mechanical properties of protein hydrogels

    NASA Astrophysics Data System (ADS)

    Cao, Yi

    Naturally occurring biomaterials possess diverse mechanical properties, which are critical to their unique biological functions. However, it remains challenging to rationally control the mechanical properties of synthetic biomaterials. Here we provide a bottom-up approach to rationally design the mechanical properties of protein-based hydrogels. We first use atomic fore microscope (AFM) based single-molecule force spectroscopy to characterize the mechanical stability of individual protein building blocks. We then rationally design the mechanical properties of hydrogels by selecting different combination of protein building blocks of known mechanical properties. As a proof-of-principle, we demonstrate the engineering of hydrogels of distinct extensibility and toughness. This simple combinatorial approach allows direct translation of the mechanical properties of proteins from the single molecule level to the macroscopic level and represents an important step towards rationally designing the mechanical properties of biomaterials.

  19. Biodegradable compounds: Rheological, mechanical and thermal properties

    NASA Astrophysics Data System (ADS)

    Nobile, Maria Rossella; Lucia, G.; Santella, M.; Malinconico, M.; Cerruti, P.; Pantani, R.

    2015-12-01

    Recently great attention from industry has been focused on biodegradable polyesters derived from renewable resources. In particular, PLA has attracted great interest due to its high strength and high modulus and a good biocompatibility, however its brittleness and low heat distortion temperature (HDT) restrict its wide application. On the other hand, Poly(butylene succinate) (PBS) is a biodegradable polymer with a low tensile modulus but characterized by a high flexibility, excellent impact strength, good thermal and chemical resistance. In this work the two aliphatic biodegradable polyesters PBS and PLA were selected with the aim to obtain a biodegradable material for the industry of plastic cups and plates. PBS was also blended with a thermoplastic starch. Talc was also added to the compounds because of its low cost and its effectiveness in increasing the modulus and the HDT of polymers. The compounds were obtained by melt compounding in a single screw extruder and the rheological, mechanical and thermal properties were investigated. The properties of the two compounds were compared and it was found that the values of the tensile modulus and elongation at break measured for the PBS/PLA/Talc compound make it interesting for the production of disposable plates and cups. In terms of thermal resistance the compounds have HDTs high enough to contain hot food or beverages. The PLA/PBS/Talc compound can be, then, considered as biodegradable substitute for polystyrene for the production of disposable plates and cups for hot food and beverages.

  20. Measuring the Mechanical Properties of Plant Cell Walls.

    PubMed

    Vogler, Hannes; Felekis, Dimitrios; Nelson, Bradley J; Grossniklaus, Ueli

    2015-01-01

    The size, shape and stability of a plant depend on the flexibility and integrity of its cell walls, which, at the same time, need to allow cell expansion for growth, while maintaining mechanical stability. Biomechanical studies largely vanished from the focus of plant science with the rapid progress of genetics and molecular biology since the mid-twentieth century. However, the development of more sensitive measurement tools renewed the interest in plant biomechanics in recent years, not only to understand the fundamental concepts of growth and morphogenesis, but also with regard to economically important areas in agriculture, forestry and the paper industry. Recent advances have clearly demonstrated that mechanical forces play a crucial role in cell and organ morphogenesis, which ultimately define plant morphology. In this article, we will briefly review the available methods to determine the mechanical properties of cell walls, such as atomic force microscopy (AFM) and microindentation assays, and discuss their advantages and disadvantages. But we will focus on a novel methodological approach, called cellular force microscopy (CFM), and its automated successor, real-time CFM (RT-CFM). PMID:27135321

  1. Measuring the Mechanical Properties of Plant Cell Walls

    PubMed Central

    Vogler, Hannes; Felekis, Dimitrios; Nelson, Bradley J.; Grossniklaus, Ueli

    2015-01-01

    The size, shape and stability of a plant depend on the flexibility and integrity of its cell walls, which, at the same time, need to allow cell expansion for growth, while maintaining mechanical stability. Biomechanical studies largely vanished from the focus of plant science with the rapid progress of genetics and molecular biology since the mid-twentieth century. However, the development of more sensitive measurement tools renewed the interest in plant biomechanics in recent years, not only to understand the fundamental concepts of growth and morphogenesis, but also with regard to economically important areas in agriculture, forestry and the paper industry. Recent advances have clearly demonstrated that mechanical forces play a crucial role in cell and organ morphogenesis, which ultimately define plant morphology. In this article, we will briefly review the available methods to determine the mechanical properties of cell walls, such as atomic force microscopy (AFM) and microindentation assays, and discuss their advantages and disadvantages. But we will focus on a novel methodological approach, called cellular force microscopy (CFM), and its automated successor, real-time CFM (RT-CFM). PMID:27135321

  2. Photopatterning the mechanical properties of polydimethylsiloxane films

    NASA Astrophysics Data System (ADS)

    Cotton, D. P. J.; Popel, A.; Graz, I. M.; Lacour, S. P.

    2011-03-01

    Silicone rubber films with graded and localized mechanical properties are prepared using two-part polydimethylsiloxane (PDMS) elastomer, photoinhibitor compounds and conventional photolithography. First the un-cross-linked PDMS is mixed with benzophenone. The resulting positive photosensitive material is then exposed through a mask to UV light from a conventional mask aligner. Cross-linking of the UV exposed elastomer is inhibited, leading to softer regions than the surrounding unexposed matrix. By empirically fitting the nonlinear, hyperelastic Mooney-Rivlin model to experimentally measured stress-strain curves we determine the equivalent tensile modulus (E) of the rubber film. We show the PDMS tensile modulus can then be adjusted in the 0.65-2.9 MPa range by decreasing the UV exposure dose (from 24 000 to 0 mJ cm-2). Further, using a patterned UV mask, we can locally define differential regions of tensile modulus within a single PDMS rubber film. We demonstrate that "hard islands" (E ≈ 2.9 MPa) of 100 μm minimum diameter can be patterned within a 100-μm-thick, single "soft" PDMS rubber membrane (E ≈ 0.65 MPa) cured at 150 °C for 24 h. Thin gold film conductors patterned directly onto the photopatterned PDMS are stretchable and withstand uniaxial cycling to tens of percent strain. The mechanically "pixellated" PDMS rubber film provides an improved substrate with built-in strain relief for stretchable electronics.

  3. Trabecular Bone Mechanical Properties and Fractal Dimension

    NASA Technical Reports Server (NTRS)

    Hogan, Harry A.

    1996-01-01

    Countermeasures for reducing bone loss and muscle atrophy due to extended exposure to the microgravity environment of space are continuing to be developed and improved. An important component of this effort is finite element modeling of the lower extremity and spinal column. These models will permit analysis and evaluation specific to each individual and thereby provide more efficient and effective exercise protocols. Inflight countermeasures and post-flight rehabilitation can then be customized and targeted on a case-by-case basis. Recent Summer Faculty Fellowship participants have focused upon finite element mesh generation, muscle force estimation, and fractal calculations of trabecular bone microstructure. Methods have been developed for generating the three-dimensional geometry of the femur from serial section magnetic resonance images (MRI). The use of MRI as an imaging modality avoids excessive exposure to radiation associated with X-ray based methods. These images can also detect trabecular bone microstructure and architecture. The goal of the current research is to determine the degree to which the fractal dimension of trabecular architecture can be used to predict the mechanical properties of trabecular bone tissue. The elastic modulus and the ultimate strength (or strain) can then be estimated from non-invasive, non-radiating imaging and incorporated into the finite element models to more accurately represent the bone tissue of each individual of interest. Trabecular bone specimens from the proximal tibia are being studied in this first phase of the work. Detailed protocols and procedures have been developed for carrying test specimens through all of the steps of a multi-faceted test program. The test program begins with MRI and X-ray imaging of the whole bones before excising a smaller workpiece from the proximal tibia region. High resolution MRI scans are then made and the piece further cut into slabs (roughly 1 cm thick). The slabs are X-rayed again

  4. Size effects on mechanical and thermal properties of thin films

    NASA Astrophysics Data System (ADS)

    Alam, Md Tarekul

    preparation, setting up proper boundary conditions and the required resolution in measurement. The scope of this work requires multiple property characterization simultaneously, which makes it even more challenging. To accomplish this goal, several micro electro mechanical system (MEMS) based testing devices have been developed in this work. These devices can integrate sample, tiny heaters, electrodes, actuators and sensors to measure not just one property, but multiple properties, at the same time. An additional advantage of the setup is its inherently small size that allows high-resolution microscopy techniques such as transmission electron microscope (TEM) to visualize the events taking place inside the specimen during the experiments. These devices were then used to characterize both single and multi-domain studies. This dissertation showed experimental evidence of length scale induced coupling between thermal, mechanical and electrical domains. The technological aspect of this research impacts micro and opto electronics, energy conversion, sensors and actuators and in general, nanotechnology applications. However, it is also very fundamental in nature, and the new phenomena that are explored will enrich knowledge of material behavior and lay foundation for the future work on multi-physics of material at nano scale. (Abstract shortened by UMI.).

  5. Mechanical properties of thermal protection system materials.

    SciTech Connect

    Hardy, Robert Douglas; Bronowski, David R.; Lee, Moo Yul; Hofer, John H.

    2005-06-01

    An experimental study was conducted to measure the mechanical properties of the Thermal Protection System (TPS) materials used for the Space Shuttle. Three types of TPS materials (LI-900, LI-2200, and FRCI-12) were tested in 'in-plane' and 'out-of-plane' orientations. Four types of quasi-static mechanical tests (uniaxial tension, uniaxial compression, uniaxial strain, and shear) were performed under low (10{sup -4} to 10{sup -3}/s) and intermediate (1 to 10/s) strain rate conditions. In addition, split Hopkinson pressure bar tests were conducted to obtain the strength of the materials under a relatively higher strain rate ({approx}10{sup 2} to 10{sup 3}/s) condition. In general, TPS materials have higher strength and higher Young's modulus when tested in 'in-plane' than in 'through-the-thickness' orientation under compressive (unconfined and confined) and tensile stress conditions. In both stress conditions, the strength of the material increases as the strain rate increases. The rate of increase in LI-900 is relatively small compared to those for the other two TPS materials tested in this study. But, the Young's modulus appears to be insensitive to the different strain rates applied. The FRCI-12 material, designed to replace the heavier LI-2200, showed higher strengths under tensile and shear stress conditions. But, under a compressive stress condition, LI-2200 showed higher strength than FRCI-12. As far as the modulus is concerned, LI-2200 has higher Young's modulus both in compression and in tension. The shear modulus of FRCI-12 and LI-2200 fell in the same range.

  6. Mechanical Properties of Nb-1Zr Weldments

    NASA Astrophysics Data System (ADS)

    Santella, Michael; McNabb, Jeffery; Frederick, Alan

    2005-02-01

    The objective of this work was to measure the mechanical properties of Nb-1Zr weldments, and, more specifically, to evaluate whether Charpy V-notch impact testing may be a more meaningful indication of weld deposit ductility than the slow bend testing. Manual gas-tungsten-arc welds were made in Mb-1Zr plates using 4 beads of filler wire from the same heat. The cold-rolled plates were recrystallized by heat treatment at 1773 K for 1 hour prior to welding. Welded plates were made in a stainless steel welding glove box backfilled with either argon or helium. Two plates were made with each gas, with one plate post-weld heat treated at 1373 K. Weld metal from each of the four welded plates was subjected to chemical analysis, tensile testing at room temperature, and Charpy V-notch testing at 93-473 K. Also, microhardness testing was used to evaluate property gradients in the weldments. Impurity concentrations in the weld deposits compared well with the base metal concentrations and were within the limits of the relevant ASTM specification, B393 Type 3. All specimens with one minor exception had yield strengths, tensile strengths, and ductilities that exceeded the ASTM specified minimums. The Charpy V-notch specimens from the as-welded He weld deposit, and from both post-weld-heat-treated weld deposits showed similar behavior with upper shelf energies of 9.7-10 J and ductile-brittle transition temperatures of 85-100 K. These Charpy V-notch properties were comparable to those of the unwelded plate. The as-welded Ar weld deposit had a slightly higher ductile-brittle transition temperature near 150 K. Microhardness testing indicated that in the as-welded conditions the average hardness of the weld deposit made in Ar was higher than that made in He. Post-weld heat treatment reduced the average hardnesses of base metal and weld metal. The range of hardnesses in the weld deposits was increased by the post weld heat treatment.

  7. Mechanical Properties of Nuclear Fuel Surrogates using Picosecond Laser Ultrasonics

    SciTech Connect

    David Hurley; Marat Khafizov; Farhad Farzbod; Eric Burgett

    2013-05-01

    Detailed understanding between microstructure evolution and mechanical properties is important for designing new high burnup nuclear fuels. In this presentation we discuss the use of picosecond ultrasonics to measure localize changes in mechanical properties of fuel surrogates. We develop measurement techniques that can be applied to investigate heterogeneous elastic properties caused by localize changes in chemistry, grain microstructure caused by recrystallization, and mechanical properties of small samples prepared using focused ion beam sample preparation. Emphasis is placed on understanding the relationship between microstructure and mechanical properties

  8. Mechanical properties of hybrid polymer nanotube systems

    NASA Astrophysics Data System (ADS)

    Coleman, Jonathan N.; Cadek, Martin; Dalton, Alan B.; Munoz, Edgar; Razal, Joselito; Baughman, Ray H.; Blau, Werner J.

    2003-04-01

    In this work, mechanical properties of hybrid materials fabricated from nanotubes and commercially available polymers were investigated. It was found that, by adding various concentrations of arc discharge multiwall nanotubes, both Young"s modulus and hardness increased by factors of 1.8 and 1.6 at 1wt% in PVA and 2.8 and 2.0 at 8wt% in PVK, in reasonable agreement with the Halpin-Tsai theory. Furthermore, the presence of the nanotubes was found to nucleate crystallization of the PVA. This crystal growth is thought to enhance matrix-nanotube stress transfer. In addition, microscopy studies suggest extremely strong interfacial bonding in the PVA-based composite. This is manifested by the fracture of the polymer rather that the polymer-nanotube interface. The dependence of the polymer nanotube interfacial interaction on host polymer was studied by intercalating various polymers (PVA, PVP and PS) into single wall nanotube buckypaper. Even for short soak times, significant polymer intercalation into existing free volume was observed. Depending on the polymer and the level of intercalation tensile tests on intercalated sheets showed that the Young"s modulus, strength and toughness increased by factors of 3, 9 and 28, respectively. This indicates that the intercalated polymer enhances load transmission between nanotubes due the significant stress transfer. The level of stress transfer was observed to scale with polymer hydrophobicity as expected.

  9. Nonlinear NDE of Concrete Mechanical Properties

    NASA Astrophysics Data System (ADS)

    Shkolnik, Iosif E.

    2006-05-01

    Obtained theoretical relationship shows that the strength of concrete increases if the nonlinear parameter decreases. Experimental data proved that modulus of elasticity, ultrasound pulse velocity and nonlinear parameter are independent characteristics of concrete. Two nondestructive patent methods based on the measurement of resonant frequency shift and phase shift are described. These nonlinear nondestructive methods can be used when conventional acoustic methods are not applicable for evaluating strength of concrete. The relationship between static and dynamic modulus is obtained from the thermofluctuation theory and nonlinear equation of state of concrete. Corresponding relationship shows that the ratio of the static to the dynamic modulus of elasticity depends on the strength of concrete, its temperature, ratio and rate of loading, and that dynamic modulus is greater than static modulus of elasticity. Comparative study illustrates substantial agreement between obtained relationships and existing experimental results as well as general equations given in standards. Presented data illustrate the potential of the nonlinear approach, and indicate a new direction for nonlinear nondestructive methods of evaluating mechanical properties of concrete.

  10. Mechanical properties of lattice grid composites

    NASA Astrophysics Data System (ADS)

    Fan, Hualin; Fang, Daining; Jin, Fengnian

    2008-08-01

    An equivalent continuum method only considering the stretching deformation of struts was used to study the in-plane stiffness and strength of planar lattice grid composite materials. The initial yield equations of lattices were deduced. Initial yield surfaces were depicted separately in different 3D and 2D stress spaces. The failure envelope is a polyhedron in 3D spaces and a polygon in 2D spaces. Each plane or line of the failure envelope is corresponding to the yield or buckling of a typical bar row. For lattices with more than three bar rows, subsequent yield of the other bar row after initial yield made the lattice achieve greater limit strength. The importance of the buckling strength of the grids was strengthened while the grids were relative sparse. The integration model of the method was used to study the nonlinear mechanical properties of strain hardening grids. It was shown that the integration equation could accurately model the complete stress-strain curves of the grids within small deformations.

  11. Fluid Mechanical Properties of Silkworm Fibroin Solutions

    NASA Astrophysics Data System (ADS)

    Matsumoto, Akira

    2005-11-01

    The aqueous solution behavior of silk fibroin is of interest due to the assembly and processing of this protein related to the spinning of protein fibers that exhibit remarkable mechanical properties. To gain insight into the origins of this functional feature, it is desired to determine how the protein behaves under a range of solution conditions. Pure fibroin at different concentrations in water was studied for surface tension, as a measure of surfactancy. In addition, shear induced changes on these solutions in terms of structure and morphology was also determined. Fibroin solutions exhibited shear rate-sensitive viscosity changes and precipitated at a critical shear rate where a dramatic increase of 75-150% of the initial value was observed along with a decrease in viscosity. In surface tension measurements, critical micelle concentrations were in the range of 3-4% w/v. The influence of additional factors, such as sericin protein, divalent and monovalent cations, and pH on the solution behavior in relation to structural and morphological features will also be described.

  12. Tuning the mechanical properties of silica microcapsules.

    PubMed

    Zhang, Lijuan; D'Acunzi, Maria; Kappl, Michael; Imhof, Arnout; van Blaaderen, Alfons; Butt, Hans-Jürgen; Graf, Robert; Vollmer, Doris

    2010-12-21

    Heat treatment is a standard method to increase the hardness of silica in various applications. Here, we tested the effect of high temperature annealing on the mechanical properties of silica microcapsules by force spectroscopy under point loads applied to the particle shell. The Young's modulus of the shells moderately increases after annealing at temperatures above 500 °C. Temperatures over 850 °C result in a much stronger increase and the Young's modulus is close to that of fused silica after annealing at 1100 °C. NMR analysis revealed that in untreated microcapsules synthesized by seeded growth using the Stöber method only 55% of the silicon atoms form siloxane bonds with four neighbors, whereas the remaining ones only form three or less siloxane bonds each and, thus, a large number of ethoxy and silanol groups still exist. During annealing at 500 °C, these are successively transformed into siloxane bonds through condensation reactions. This process correlates with only a moderate increase in Young's modulus. The strong increase at temperatures above 850 °C was associated with a densification which was associated by a decrease in capsule size and shell thickness while the shells remained homogenous and of spherical shape. The main strengthening of the shells is thus mainly due to compaction by sintering at length scales significantly larger than that of local siloxane bonds. PMID:20963236

  13. Mechanical Properties of the Upper Airway

    PubMed Central

    Strohl, Kingman P.; Butler, James P.; Malhotra, Atul

    2013-01-01

    The importance of the upper airway (nose, pharynx, and larynx) in health and in the pathogenesis of sleep apnea, asthma, and other airway diseases, discussed elsewhere in the Comprehensive Physiology series, prompts this review of the biomechanical properties and functional aspects of the upper airway. There is a literature based on anatomic or structural descriptions in static circumstances, albeit studied in limited numbers of individuals in both health and disease. As for dynamic features, the literature is limited to studies of pressure and flow through all or parts of the upper airway and to the effects of muscle activation on such features; however, the links between structure and function through airway size, shape, and compliance remain a topic that is completely open for investigation, particularly through analyses using concepts of fluid and structural mechanics. Throughout are included both historically seminal references, as well as those serving as signposts or updated reviews. This article should be considered a resource for concepts needed for the application of biomechanical models of upper airway physiology, applicable to understanding the pathophysiology of disease and anticipated results of treatment interventions. PMID:23723026

  14. Application of dynamic mechanical analysis (DMA) to the determination of the mechanical properties of coated pellets.

    PubMed

    Bashaiwoldu, Abraham B; Podczeck, F; Newton, J M

    2004-04-15

    Pellets containing a model drug, paracetamol, and microcrystalline cellulose (MCC) were designed to vary their mechanical properties by the incorporation of lactose, glyceryl monostearate (GMS), ethanol, or glycerol, and were produced by the process of extrusion and spheronization. The pellets were coated with an aqueous dispersion of ethyl cellulose (Surelease) to different levels of weight gain (5, 10, and 20%). The tensile strength, deformability, linear strain, elastic modulus, and shear strength of the coated and uncoated pellets were determined by conventional techniques, which are obtained from diametral compression test of individual pellets and compaction of a bed of pellets. Dynamic Mechanical Analysis (DMA) was performed on single pellets to determine the storage modulus and phase angle of the coated pellets. This work demonstrated that the coating film affected the mechanical properties of the pellets differently depending on the properties of the core pellets. Analysis of variance established a significant increase in the strength of the soft GMS- or glycerol-containing pellets with coating, while the effect of the coating material was not significant with respect to the elastic modulus, storage modulus, and phase angle of such pellets. The effects of the coating material on the elastic modulus, deformability, storage modulus, and phase angle of the rigid lactose-containing pellets were significant. The sinusoidal stress-relaxation cycle of the DMA illustrated the increase in the viscoelasticity of all the pellets after coating. Finally, the work demonstrate the advantages of DMA in determining the reversible or dissipated energy by means of storage modulus or phase angle when compared with the irreversible structural destruction of the pellets by conventional techniques. PMID:15072782

  15. Investigation of photo-bleaching through transmittance method in pigmented solution: understanding possible mechanisms and advantages for photo dental whitening

    NASA Astrophysics Data System (ADS)

    Florez, F. L. E.; Lins, E. C.; Portero, Priscila P.; Lizarelli, R. F. Z.; Oliveira, O. B., Jr.; Bagnato, V. S.

    2007-02-01

    The dental bleaching is known for many years. Recently a technique employing light has open up new and exciting possibilities. Besides its vast application there are still many important points to be understood about teeth photon bleaching. In this work we present an "in vitro" experiment to explore the main mechanisms involved during the photon action in tooth whitening. Our results indicated that light at same wavelengths are great absorbed by pigments creating a local heating which considerably increase the bleaching rate. This results in a fast reaction without heating the whole dental structure. We discuss details of our experiment. Work supported by Fapesp and CNPq.

  16. Cell Mechanosensitivity: Mechanical Properties and Interaction with Gravitational Field

    PubMed Central

    Ogneva, I. V.

    2013-01-01

    This paper addressed the possible mechanisms of primary reception of a mechanical stimulus by different cells. Data concerning the stiffness of muscle and nonmuscle cells as measured by atomic force microscopy are provided. The changes in the mechanical properties of cells that occur under changed external mechanical tension are presented, and the initial stages of mechanical signal transduction are considered. The possible mechanism of perception of different external mechanical signals by cells is suggested. PMID:23509748

  17. Alternative mating tactics in the yellow dung fly: resolving mechanisms of small-male advantage off pasture.

    PubMed

    Gress, Brian E; Waltzer, Ryan J; Lüpold, Stefan; Droge-Young, Elizabeth M; Manier, Mollie K; Pitnick, Scott

    2014-01-01

    Recent work suggests that the yellow dung fly mating system may include alternative patroller-competitor mating tactics in which large males compete for gravid females on dung, whereas small, non-competitive males search for females at foraging sites. Small males obtain most matings off pasture, yet the behavioural mechanism(s) giving rise to this pattern are unknown. We investigated the male and female behaviours that determine mating success in this environment by conducting field mating experiments and found small males to benefit from several attributes specific to the off-pasture mating environment. First, small males from foraging sites exhibited higher mating propensity, indicating that large males away from dung may be depleted of energy and/or sperm. Second, small males were more discriminating, being significantly less likely to attempt with non-gravid females, which are absent on dung but common off pasture. Third, non-gravid females were generally more likely to actively struggle and reject mating attempts; however, such behaviours occurred disproportionately more often with large males. Female Scathophaga stercoraria thus appear to preferentially mate with small males when off pasture. These findings challenge assumptions about male-female interactions in systems with alternative mating tactics and reveal hidden processes that may influence selection patterns in the field. PMID:24225455

  18. Alternative mating tactics in the yellow dung fly: resolving mechanisms of small-male advantage off pasture

    PubMed Central

    Gress, Brian E.; Waltzer, Ryan J.; Lüpold, Stefan; Droge-Young, Elizabeth M.; Manier, Mollie K.; Pitnick, Scott

    2014-01-01

    Recent work suggests that the yellow dung fly mating system may include alternative patroller–competitor mating tactics in which large males compete for gravid females on dung, whereas small, non-competitive males search for females at foraging sites. Small males obtain most matings off pasture, yet the behavioural mechanism(s) giving rise to this pattern are unknown. We investigated the male and female behaviours that determine mating success in this environment by conducting field mating experiments and found small males to benefit from several attributes specific to the off-pasture mating environment. First, small males from foraging sites exhibited higher mating propensity, indicating that large males away from dung may be depleted of energy and/or sperm. Second, small males were more discriminating, being significantly less likely to attempt with non-gravid females, which are absent on dung but common off pasture. Third, non-gravid females were generally more likely to actively struggle and reject mating attempts; however, such behaviours occurred disproportionately more often with large males. Female Scathophaga stercoraria thus appear to preferentially mate with small males when off pasture. These findings challenge assumptions about male–female interactions in systems with alternative mating tactics and reveal hidden processes that may influence selection patterns in the field. PMID:24225455

  19. Auxetic oesophageal stents: structure and mechanical properties.

    PubMed

    Ali, Murtaza Najabat; Busfield, James J C; Rehman, Ihtesham U

    2014-02-01

    Oesophageal cancer is the ninth leading cause of malignant cancer death and its prognosis remains poor, ranking as the sixth most frequent cause of death in the world. This research work aims to adopt an Auxetic (rotating-squares) geometry device, that had previously been examined theoretically and analysed by Grima and Evans (J Mater Sci Lett 19(17):1563-1565, 2000), to produce a novel Auxetic oesophageal stent and stent-grafts relevant to the palliative treatment of oesophageal cancer and also for the prevention of dysphagia. This paper discusses the manufacture of a small diameter Auxetic oesophageal stent and stent-graft. The oral deployment of such an Auxetic stent would be simplest if a commercial balloon dilatational catheter was used as this obviates the need for an expensive dedicated delivery system. A novel manufacturing route was employed in this research to develop both Auxetic films and Auxetic oesophageal stents, which ranged from conventional subtractive techniques to a new additive manufacturing method. Polyurethane was selected as a material for the fabrication of Auxetic films and Auxetic oesophageal stents because of its good biocompatibility and non-toxicological properties. The Auxetic films were later used for the fabrication of seamed Auxetic oesophageal stents. The flexible polyurethane tubular grafts were also attached to the inner luminal side of the seamless Auxetic oesophageal stents, in order to prevent tumour in-growth. Scanning electron microscopy was used to conduct surface morphology study by using different Auxetic specimens developed from different conventional and new additive manufacturing techniques. Tensile testing of the Auxetic films was performed to characterise their mechanical properties. The stent expansion tests of the Auxetic stents were done to analyse the longitudinal extension and radial expansion of the Auxetic stent at a range of radial pressures applied by the balloon catheter, and to also identify the pressure

  20. Advantages of using the CRISPR/Cas9 system of genome editing to investigate male reproductive mechanisms using mouse models

    PubMed Central

    Young, Samantha AM; Aitken, R John; Ikawa, Masahito

    2015-01-01

    Gene disruption technology has long been beneficial for the study of male reproductive biology. However, because of the time and cost involved, this technology was not a viable method except in specialist laboratories. The advent of the CRISPR/Cas9 system of gene disruption has ushered in a new era of genetic investigation. Now, it is possible to generate gene-disrupted mouse models in very little time and at very little cost. This Highlight article discusses the application of this technology to study the genetics of male fertility and looks at some of the future uses of this system that could be used to reveal the essential and nonessential genetic components of male reproductive mechanisms. PMID:25994645

  1. Mechanical properties of hydroxyapatite whisker reinforced polyetherketoneketone composite scaffolds.

    PubMed

    Converse, Gabriel L; Conrad, Timothy L; Roeder, Ryan K

    2009-12-01

    The apparent mechanical properties of hydroxyapatite (HA) whisker reinforced polyetherketoneketone (PEKK) scaffolds were evaluated in unconfined, uniaxial compression to investigate the effects of the porosity (75%, 82.5% and 90%), HA content (0, 20 and 40 vol%) and mold temperature (350, 365 and 375 ( composite function)C). Increased porosity resulted in a non-linear decrease in the elastic modulus and yield strength for both reinforced and unreinforced PEKK scaffolds, as expected. The increase in elastic modulus and yield strength with increased relative density followed a power-law, similar to trabecular bone and other open-cell foams. HA whisker reinforcement generally resulted in an increased elastic modulus from 0 to 20 vol% HA and a subsequent decrease from 20 to 40 vol% HA, while the yield strength and strain were decreased in scaffolds with 40 vol% HA compared to those with 0 or 20 vol% HA. Increased mold temperature resulted in an increased elastic modulus, yield strength and yield strain. These effects enabled the mechanical properties to be tailored to mimic human trabecular bone. The elastic modulus was greater than 50 MPa, and the yield strength was greater than 0.5 MPa, for scaffolds with 75% porosity at all combinations of reinforcement level and mold temperature. Scaffolds with 75% porosity and 20 vol% HA molded at 375 ( composite function)C exhibited a mean elastic modulus and yield strength of 149 MPa and 2.2 MPa, respectively, which was the highest of the conditions investigated in this study and similar to human vertebral trabecular bone. Therefore, HA whisker reinforced PEKK scaffolds may be advantageous for permanent implant fixation, including interbody spinal fusion. PMID:19716108

  2. Ultrasonic nondestructive evaluation, microstructure, and mechanical property interrelations

    NASA Technical Reports Server (NTRS)

    Vary, A.

    1984-01-01

    Ultrasonic techniques for mechanical property characterizations are reviewed and conceptual models are advanced for explaining and interpreting the empirically based results. At present, the technology is generally empirically based and is emerging from the research laboratory. Advancement of the technology will require establishment of theoretical foundations for the experimentally observed interrelations among ultrasonic measurements, mechanical properties, and microstructure. Conceptual models are applied to ultrasonic assessment of fracture toughness to illustrate an approach for predicting correlations found among ultrasonic measurements, microstructure, and mechanical properties.

  3. Microstructure, mechanical properties, bio-corrosion properties and antibacterial properties of Ti-Ag sintered alloys.

    PubMed

    Chen, Mian; Zhang, Erlin; Zhang, Lan

    2016-05-01

    In this research, Ag element was selected as an antibacterial agent to develop an antibacterial Ti-Ag alloy by a powder metallurgy. The microstructure, phase constitution, mechanical properties, corrosion resistance and antibacterial properties of the Ti-Ag sintered alloys have been systematically studied by X-ray diffraction (XRD), scanning electron microscope (SEM), compressive test, electrochemical measurements and antibacterial test. The effects of the Ag powder size and the Ag content on the antibacterial property and mechanical property as well as the anticorrosion property have been investigated. The microstructure results have shown that Ti-Ag phase, residual pure Ag and Ti were the mainly phases in Ti-Ag(S75) sintered alloy while Ti2Ag was synthesized in Ti-Ag(S10) sintered alloy. The mechanical test indicated that Ti-Ag sintered alloy showed a much higher hardness and the compressive yield strength than cp-Ti but the mechanical properties were slightly reduced with the increase of Ag content. Electrochemical results showed that Ag powder size had a significant effect on the corrosion resistance of Ti-Ag sintered alloy. Ag content increased the corrosion resistance in a dose dependent way under a homogeneous microstructure. Antibacterial tests have demonstrated that antibacterial Ti-Ag alloy was successfully prepared. It was also shown that the Ag powder particle size and the Ag content influenced the antibacterial activity seriously. The reduction in the Ag powder size was benefit to the improvement in the antibacterial property and the Ag content has to be at least 3wt.% in order to obtain a strong and stable antibacterial activity against Staphylococcus aureus bacteria. The bacterial mechanism was thought to be related to the Ti2Ag and its distribution. PMID:26952433

  4. Wave-Mechanical Properties of Stationary States.

    ERIC Educational Resources Information Center

    Holden, Alan

    This monograph is a review of the quantum mechanical concepts presented in two other monographs, "The Nature of Atoms" and "Bonds Between Atoms," by the same author. It is assumed the reader is familiar with these ideas. The monograph sketches only those aspects of quantum mechanics that are of most direct use in picturing and calculating the…

  5. Mechanical Properties of Degraded PMR-15 Resin

    NASA Technical Reports Server (NTRS)

    Tsuji, Luis C.; McManus, Hugh L.; Bowles, Kenneth J.

    1998-01-01

    Thermo-oxidative aging produces a non-uniform degradation state in PMR-15 resin. A surface layer, usually attributed to oxidative degradation, forms. This surface layer has different properties from the inner material. A set of material tests was designed to separate the properties of the oxidized surface layer from the properties of interior material. Test specimens were aged at 316 C in either air or nitrogen, for durations of up to 800 hours. The thickness of the oxidized surface layer in air aged specimens, and the shrinkage and Coefficient of Thermal Expansion (CTE) of nitrogen aged specimens were measured directly. Four-point-bend tests were performed to determine modulus of both the oxidized surface layer and the interior material. Bimaterial strip specimens consisting of oxidized surface material and unoxidized interior material were constructed and used to determine surface layer shrinkage and CTE. Results confirm that the surface layer and core materials have substantially different properties.

  6. Mechanical Properties of Unreinforced Brick Masonry, Section1

    SciTech Connect

    Mosalam, K; Glascoe, L; Bernier, J

    2009-10-02

    Before the advent of concrete and steel, masonry helped build civilizations. From Egypt in Africa, Rome in Europe, Maya in the America to China in Asia, masonry was exploited to construct the most significant, magnificent and long lasting structures on the Earth. Looking at the Egyptian pyramids, Mayan temples, Roman coliseum and Chinese Great Wall, one cannot stop wondering about the significance and popularity that masonry has had through out history. Lourenco et al (1989) summed up the reasons for the popularity of masonry in the following, 'The most important characteristic of masonry construction is its simplicity. Laying pieces of stone or bricks on top of each other, either with or without cohesion via mortar, is a simple, though adequate, technique that has been successful ever since remote ages. Other important characteristics are the aesthetics, solidity, durability, low maintenance, versatility, sound absorption and fire protection' Despite these advantages, masonry is no longer preferred structural material in many parts of the developed world, especially in seismically active parts of the world. Partly, masonry and especially unreinforced masonry (URM) has mechanical properties such as strength and ductility inferior to those of reinforced concrete and steel. Moreover, masonry structures were traditionally built based on rules of thumb acquired over many years of practice and/or empirical data from testing. Accordingly, we do not have a rigorous and uniform method of analysis and design for masonry. Nevertheless, the world still possesses numerous historic and ordinary masonry structures, which require maintenance and strengthening to combat the assault of time and nature. Hence, it is important to study fundamental properties of masonry so that new masonry structures can be effectively designed and built, and the cost for servicing old structures and for building new ones will be less expensive.

  7. Mechanical properties of UV irradiated rat tail tendon (RTT) collagen.

    PubMed

    Sionkowska, Alina; Wess, Tim

    2004-04-01

    The mechanical properties of RTT collagen tendon before and after UV irradiation have been investigated by mechanical testing (Instron). Air-dried tendon were submitted to treatment with UV irradiation (wavelength 254 nm) for different time intervals. The changes in such mechanical properties as breaking strength and percentage elongation have been investigated. The results have shown, that the mechanical properties of the tendon were greatly affected by time of UV irradiation. Ultimate tensile strength and ultimate percentage elongation decreased after UV irradiation of the tendon. Increasing UV irradiation leads to a decrease in Young's modulus of the tendon. PMID:15178003

  8. Mechanical and physical properties of plasma-sprayed stabilized zirconia

    NASA Technical Reports Server (NTRS)

    Siemers, P. A.; Mehan, R. L.

    1983-01-01

    Physical and mechanical properties were determined for plasma-sprayed MgO- or Y2O3-stabilized ZrO2 thermal barrier coatings. Properties were determined for the ceramic coating in both the freestanding condition and as-bonded to a metal substrate. The properties of the NiCrAlY bond coating were also investigated.

  9. Phonon spectrum, mechanical and thermophysical properties of thorium carbide

    NASA Astrophysics Data System (ADS)

    Pérez Daroca, D.; Jaroszewicz, S.; Llois, A. M.; Mosca, H. O.

    2013-06-01

    In this work, we study, by means of density functional perturbation theory and the pseudopotential method, mechanical and thermophysical properties of thorium carbide. These properties are derived from the lattice dynamics in the quasi-harmonic approximation. The phonon spectrum of ThC presented in this article, to the best authors' knowledge, have not been studied, neither experimentally, nor theoretically. We compare mechanical properties, volume thermal expansion and molar specific capacities with previous results and find a very good agreement.

  10. Mechanical Properties of Degraded PMR-15 Resin

    NASA Technical Reports Server (NTRS)

    Tsuji, Luis C.

    2000-01-01

    Thermo-oxidative aging produces a nonuniform degradation state in PMR-15 resin. A surface layer, usually attributed to oxidative degradation, forms. This surface layer has different properties from the inner material. A set of material tests was designed to separate the properties of the oxidized surface layer from the properties of interior material. Test specimens were aged at 316 C in either air or nitrogen, for durations of up to 800 hr. The thickness of the oxidized surface layer in air aged specimens, and the shrinkage and coefficient of thermal expansion (CTE) of nitrogen aged specimens were measured directly. The nitrogen-aged specimens were assumed to have the same properties as the interior material in the air-aged specimens. Four-point-bend tests were performed to determine modulus of both the oxidized surface layer and the interior material. Bimaterial strip specimens consisting of oxidized surface material and unoxidized interior material were constructed and used to determine surface layer shrinkage and CTE. Results confirm that the surface layer and core materials have substantially different properties.

  11. In situ thermally reduced graphene oxide/epoxy composites: thermal and mechanical properties

    NASA Astrophysics Data System (ADS)

    Olowojoba, Ganiu B.; Eslava, Salvador; Gutierrez, Eduardo S.; Kinloch, Anthony J.; Mattevi, Cecilia; Rocha, Victoria G.; Taylor, Ambrose C.

    2016-01-01

    Graphene has excellent mechanical, thermal, optical and electrical properties and this has made it a prime target for use as a filler material in the development of multifunctional polymeric composites. However, several challenges need to be overcome to take full advantage of the aforementioned properties of graphene. These include achieving good dispersion and interfacial properties between the graphene filler and the polymeric matrix. In the present work, we report the thermal and mechanical properties of reduced graphene oxide/epoxy composites prepared via a facile, scalable and commercially viable method. Electron micrographs of the composites demonstrate that the reduced graphene oxide (rGO) is well dispersed throughout the composite. Although no improvements in glass transition temperature, tensile strength and thermal stability in air of the composites were observed, good improvements in thermal conductivity (about 36 %), tensile and storage moduli (more than 13 %) were recorded with the addition of 2 wt% of rGO.

  12. Lunar soil properties and soil mechanics

    NASA Technical Reports Server (NTRS)

    Mitchell, J. K.; Houston, W. N.

    1974-01-01

    The long-range objectives were to develop methods of experimentation and analysis for the determination of the physical properties and engineering behavior of lunar surface materials under in situ environmental conditions. Data for this purpose were obtained from on-site manned investigations, orbiting and softlanded spacecraft, and terrestrial simulation studies. Knowledge of lunar surface material properties are reported for the development of models for several types of lunar studies and for the investigation of lunar processes. The results have direct engineering application for manned missions to the moon.

  13. Aerosol properties from multi-spectral and multi-angular aircraft 4STAR observations: expected advantages and challenges

    NASA Astrophysics Data System (ADS)

    Kassianov, Evgueni; Flynn, Connor; Redemann, Jens; Schmid, Beat; Russell, Philip B.; Sinyuk, Alexander

    2012-11-01

    The airborne Spectrometer for Sky-Scanning, Sun-Tracking Atmospheric Research (4STAR) is developed to retrieve aerosol microphysical and optical properties from multi-angular and multi-spectral measurements of sky radiance and direct-beam sun transmittance. The necessarily compact design of the 4STAR may cause noticeable apparent enhancement of sky radiance at small scattering angles. We assess the sensitivity of expected 4STAR-based aerosol retrieval to such enhancement by applying the operational AERONET retrieval code and synthetic 4STAR-like data. Also, we assess the sensitivity of the broadband radiative fluxes and the direct aerosol radiative forcing to uncertainties in aerosol retrievals associated with the sky radiance enhancement. Our sensitivity study results suggest that the 4STARbased aerosol retrieval has limitations in obtaining detailed information on particle size distribution and scattering phase function. However, these limitations have small impact on the retrieved bulk optical parameters, such as the asymmetry factor (up to 4%, or +/-0.02) and single-scattering albedo (up to 2%, or +/-0.02), and the calculated direct aerosol radiative forcing (up to 6%, or 2 Wm-2).

  14. Aerosol Properties from Multi-spectral and Multi-angular Aircraft 4STAR Observations: Expected Advantages and Challenges

    SciTech Connect

    Kassianov, Evgueni I.; Flynn, Connor J.; Redemann, Jens; Schmid, Beat; Russell, P. B.; Sinyuk, Alexander

    2012-11-01

    The airborne Spectrometer for Sky-Scanning, Sun-Tracking Atmospheric Research (4STAR) is developed to retrieve aerosol microphysical and optical properties from multi-angular and multi-spectral measurements of sky radiance and direct-beam sun transmittance. The necessarily compact design of the 4STAR may cause noticeable apparent enhancement of sky radiance at small scattering angles. We assess the sensitivity of expected 4STAR-based aerosol retrieval to such enhancement by applying the operational AERONET retrieval code and constructed synthetic 4STARlike data. Also, we assess the sensitivity of the broadband fluxes and the direct aerosol radiative forcing to uncertainties in aerosol retrievals associated with the sky radiance enhancement. Our sensitivity study results suggest that the 4STARbased aerosol retrieval has limitations in obtaining detailed information on particle size distribution and scattering phase function. However, these limitations have small impact on the retrieved bulk optical parameters, such as the asymmetry factor (up to 4%, or ±0.02) and single-scattering albedo (up to 2%, or ±0.02), and the calculated direct aerosol radiative forcing (up to 6%, or 2 Wm-2).

  15. Physical and mechanical properties of icebergs

    SciTech Connect

    Gammon, P.H.; Bobby, W.; Gagnon, R.E.; Russell, W.E.

    1983-05-01

    Physical and mechanical characteristics of iceberg ice were studied from samples collected near the shores of eastern Newfoundland. Although the physical characteristics show considerable diversity, iceberg ice has some common features and is generally porous, lacks significant concentrations of dissolved materials, contains internal cracks and has an irregular interlocking grain structure. A review of mechanical testing of ice was carried out and an experimental setup was devised to reduce effects of improper contact between specimen and loading apparatus. Uniaxial compressive strength for iceberg ice was determined and compared with that for lake ice. The strength of iceberg ice was higher than that of lake ice but Young's Modulus for lake ice was higher.

  16. Supramolecular Polymer Nanocomposites - Improvement of Mechanical Properties

    NASA Astrophysics Data System (ADS)

    Hinricher, Jesse; Neikirk, Colin; Priestley, Rodney

    2015-03-01

    Supramolecular polymers differ from traditional polymers in that their repeat units are connected by hydrogen bonds that can reversibly break and form under various stimuli. They can be more easily recycled than conventional materials, and their highly temperature dependent viscosities result in reduced energy consumption and processing costs. Furthermore, judicious selection of supramolecular polymer architecture and functionality allows the design of advanced materials including shape memory and self-healing materials. Supramolecular polymers have yet to see widespread use because they can't support much weight due to their inherent mechanical weakness. In order to address this issue, the mechanical strength of supramolecular polymer nanocomposites based on ureidopyrmidinone (UPy) telechelic poly(caprolactone) doped with surface activated silica nanoparticles was investigated by tensile testing and dynamic mechanical analysis. The effects of varying amounts and types of nanofiller surface functionality were investigated to glean insight into the contributions of filler-filler and filler-matrix interactions to mechanical reinforcement in supramolecular polymer nanocomposites. MRSEC NSF DMR 0819860 (PI: Prof. N. Phuan Ong) REU Site Grant: NSF DMR-1156422 (PI: Prof. Mikko Haataja)

  17. Composite propellant technology research: Mechanical property characterization

    NASA Technical Reports Server (NTRS)

    Bower, Mark V.

    1991-01-01

    Proof for the existence of a single Poisson's ratio function in isotropic linear viscoelastic materials is presented. An in-depth discussion is given of three dimensional viscoelastic material properties and their relationships to linear isotropic and orthotropic viscoelastic materials. A discussion of the alternate invariant definition as used by Abaqus and how it relates to the form used by Dr. S. Peng is presented.

  18. [Estimations of mechanical properties of bones using nanoindentation].

    PubMed

    Sakamoto, Makoto

    2016-01-01

    Nanoindentation has been applied in recent years to measure the mechanical properties of bone tissues at a microscopic scale, overcoming the limitations of traditional mechanical testing techniques for small samples. This method is precise and accurate and appears well suited for measuring mechanical properties in bone. Dynamic nanoindentation is also a promising method of measuring the viscoelastic properties of bone tissues at smaller length and load scales than allowed by other testing methods, thus allowing individual constituents and local regions of inhomogeneous tissues to be characterized individually. This article describes our nanoindentation studies of bone tissues with recent studies. PMID:26728534

  19. Mechanical properties and morphology of polymer gels

    NASA Astrophysics Data System (ADS)

    Sliozberg, Yelena; Sirk, Timothy; Brennan, John; Andzelm, Jan; Mrozek, Randy; Lenhart, Joseph

    2012-02-01

    Understanding morphology and mechanical response of polymeric gels is of particular importance to design materials with required energy dissipation characteristics. We will present our latest results for polymer gels based on 1) self-assembled block copolymers and 2) chemically cross-linked polymers. The dissipative particle dynamics (DPD) was used to predict morphology in good agreement with atomic force microscopy. We have performed DPD non-equilibrium oscillatory shear calculations predicting elastic modulus of unentangled gels that correlates well with experimental rheology data. However, this methodology fails to predict mechanics of entangled polymer networks due to unphysical chain crossing brought by the soft potentials used in DPD simulations. Recently, we have introduced an improved segmental repulsion potential that removes the bond crossing allowing for reptation dynamics. The improved DPD method was used in simulations for entangled gels to explore impact of branched architecture of solvent on the mechanical response to the tensile deformation. Novel architectures of solvent resulting in a dramatic increase of the elastic modulus were identified. The topological analysis was applied to understand contributions of chemical cross-links and entanglements to the stress.

  20. Mechanical properties of intermediate filament proteins

    PubMed Central

    Charrier, Elisabeth E.; Janmey, Paul A.

    2016-01-01

    Purified intermediate filament proteins can be reassembled in vitro to produce polymers closely resembling those found in cells, and these filament form viscoelastic gels. The crosslinks holding IFs together in the network include specific bonds between polypeptides extending from the filament surface and ionic interactions mediated by divalent cations. IF networks exhibit striking non-linear elasticity with stiffness, as quantified by shear modulus, increasing an order of magnitude as the networks are deformed to large stains resembling those that soft tissues undergo in vivo. Individual Ifs can be stretched to more than 2 or 3 times their resting length without breaking. At least ten different rheometric methods have been used to quantify the viscoelasticity of IF networks over a wide range of timescales and strain magnitudes. The mechanical roles of different classes of IF on mesenchymal and epithelial cells in culture have also been studied by an even wider range of microrheological methods. These studies have documented the effects on cell mechanics when IFs are genetically or pharmacologically disrupted or when normal or mutant IF proteins are exogenously expressed in cells. Consistent with in vitro rheology, the mechanical role of IFs is more apparent as cells are subjected to larger and more frequent deformations. PMID:26795466

  1. Mechanical Properties of Intermediate Filament Proteins.

    PubMed

    Charrier, Elisabeth E; Janmey, Paul A

    2016-01-01

    Purified intermediate filament (IF) proteins can be reassembled in vitro to produce polymers closely resembling those found in cells, and these filaments form viscoelastic gels. The cross-links holding IFs together in the network include specific bonds between polypeptides extending from the filament surface and ionic interactions mediated by divalent cations. IF networks exhibit striking nonlinear elasticity with stiffness, as quantified by shear modulus, increasing an order of magnitude as the networks are deformed to large strains resembling those that soft tissues undergo in vivo. Individual IFs can be stretched to more than two or three times their resting length without breaking. At least 10 different rheometric methods have been used to quantify the viscoelasticity of IF networks over a wide range of timescales and strain magnitudes. The mechanical roles of different classes of cytoplasmic IFs on mesenchymal and epithelial cells in culture have also been studied by an even wider range of microrheological methods. These studies have documented the effects on cell mechanics when IFs are genetically or pharmacologically disrupted or when normal or mutant IF proteins are exogenously expressed in cells. Consistent with in vitro rheology, the mechanical role of IFs is more apparent as cells are subjected to larger and more frequent deformations. PMID:26795466

  2. Mechanical properties of alumina porcelain during heating

    NASA Astrophysics Data System (ADS)

    Šín, Peter; Podoba, Rudolf; ŠtubÅa, Igor; Trník, Anton

    2014-11-01

    The mechanical strength and Young's modulus of green alumina porcelain (50 wt. % of kaolin, 25 wt. % of Al2O3, and 25 wt. % of feldspar) were measured during heating up to 900 °C and 1100 °C, respectively. To this end, we used the three point-bending method and modulated force thermomechanical analysis (mf-TMA). The loss liberation - of the physically bound water (20 - 250 °C) strengthens the sample and Young's modulus increases its values significantly. The dehydroxylation that takes place in the range of 400 - 650 °C causes a slight decrease in Young's modulus. On the other hand, the mechanical strength slightly increases in this temperature range, although it has a sudden drop at 420 °C. Beyond the dehydroxylation range, above 650 °C, both Young's modulus and mechanical strength increase. Above 950 °C, a sharp increase of Young's modulus is caused by the solid-state sintering and the new structure created by the high-temperature reactions in metakaolinite.

  3. Mechanical Properties of the Frog Sarcolemma

    PubMed Central

    Fields, R. Wayne

    1970-01-01

    The elastic properties of cylindrical segments of sarcolemma were studied in single striated fibers of the frog semitendinosus muscle. All measurements were made on membranes of retraction zones, cell segments from which the sarcoplasm had retracted. Quantitative morphological studies indicated that three deforming forces interact with the intrinsic elastic properties of the sarcolemma to determine membrane configuration in retraction zone segments. The three deforming forces, namely intrazone pressure, axial fiber loads, and radial stresses introduced by retracted cell contents, could all be experimentally removed, permitting determination of the “undeformed” configuration of the sarcolemma. Analysis of these results indicated that membrane of intact fibers at rest length is about four times as wide and two-thirds as long as undeformed membrane. Membrane geometry was also studied as a function of internal hydrostatic pressure and axial loading to permit calculation of the circumferential and longitudinal tension-strain (T-S) diagrams. The sarcolemma exhibited nonlinear T-S properties concave to the tension axis in both directions. Circumferential T-S slopes (measures of membrane stiffness) ranged from 1500 to greater than 50,000 dynes/cm over the range of deformations investigated, while longitudinal T-S slopes varied from 23,000 to 225,000 dynes/cm. Thus, the membrane is anisotropic, being much stiffer in the longitudinal direction. Certain ramifications of the present results are discussed in relation to previous biomechanical studies of the sarcolemma and of other tissues. ImagesFigure 2Figure 3Figure 4 PMID:5439320

  4. The mechanical and strength properties of diamond.

    PubMed

    Field, J E

    2012-12-01

    Diamond is an exciting material with many outstanding properties; see, for example Field J E (ed) 1979 The Properties of Diamond (London: Academic) and Field J E (ed) 1992 The Properties of Natural and Synthetic Diamond (London: Academic). It is pre-eminent as a gemstone, an industrial tool and as a material for solid state research. Since natural diamonds grew deep below the Earth's surface before their ejection to mineable levels, they also contain valuable information for geologists. The key to many of diamond's properties is the rigidity of its structure which explains, for example, its exceptional hardness and its high thermal conductivity. Since 1953, it has been possible to grow synthetic diamond. Before then, it was effectively only possible to have natural diamond, with a small number of these found in the vicinity of meteorite impacts. Techniques are now available to grow gem quality synthetic diamonds greater than 1 carat (0.2 g) using high temperatures and pressures (HTHP) similar to those found in nature. However, the costs are high, and the largest commercially available industrial diamonds are about 0.01 carat in weight or about 1 mm in linear dimension. The bulk of synthetic diamonds used industrially are 600 µm or less. Over 75% of diamond used for industrial purposes today is synthetic material. In recent years, there have been two significant developments. The first is the production of composites based on diamond; these materials have a significantly greater toughness than diamond while still maintaining very high hardness and reasonable thermal conductivity. The second is the production at low pressures by metastable growth using chemical vapour deposition techniques. Deposition onto non-diamond substrates was first demonstrated by Spitsyn et al 1981 J. Cryst. Growth 52 219-26 and confirmed by Matsumoto et al 1982 Japan J. Appl. Phys. 21 L183-5. These developments have added further to the versatility of diamond. Two other groups of

  5. The mechanical and strength properties of diamond

    NASA Astrophysics Data System (ADS)

    Field, J. E.

    2012-12-01

    Diamond is an exciting material with many outstanding properties; see, for example Field J E (ed) 1979 The Properties of Diamond (London: Academic) and Field J E (ed) 1992 The Properties of Natural and Synthetic Diamond (London: Academic). It is pre-eminent as a gemstone, an industrial tool and as a material for solid state research. Since natural diamonds grew deep below the Earth's surface before their ejection to mineable levels, they also contain valuable information for geologists. The key to many of diamond's properties is the rigidity of its structure which explains, for example, its exceptional hardness and its high thermal conductivity. Since 1953, it has been possible to grow synthetic diamond. Before then, it was effectively only possible to have natural diamond, with a small number of these found in the vicinity of meteorite impacts. Techniques are now available to grow gem quality synthetic diamonds greater than 1 carat (0.2 g) using high temperatures and pressures (HTHP) similar to those found in nature. However, the costs are high, and the largest commercially available industrial diamonds are about 0.01 carat in weight or about 1 mm in linear dimension. The bulk of synthetic diamonds used industrially are 600 µm or less. Over 75% of diamond used for industrial purposes today is synthetic material. In recent years, there have been two significant developments. The first is the production of composites based on diamond; these materials have a significantly greater toughness than diamond while still maintaining very high hardness and reasonable thermal conductivity. The second is the production at low pressures by metastable growth using chemical vapour deposition techniques. Deposition onto non-diamond substrates was first demonstrated by Spitsyn et al 1981 J. Cryst. Growth 52 219-26 and confirmed by Matsumoto et al 1982 Japan J. Appl. Phys. 21 L183-5. These developments have added further to the versatility of diamond. Two other groups of materials

  6. Mechanical Properties of Austenitic Stainless Steel Made by Additive Manufacturing.

    PubMed

    Luecke, William E; Slotwinski, John A

    2014-01-01

    Using uniaxial tensile and hardness testing, we evaluated the variability and anisotropy of the mechanical properties of an austenitic stainless steel, UNS S17400, manufactured by an additive process, selective laser melting. Like wrought materials, the mechanical properties depend on the orientation introduced by the processing. The recommended stress-relief heat treatment increases the tensile strength, reduces the yield strength, and decreases the extent of the discontinuous yielding. The mechanical properties, assessed by hardness, are very uniform across the build plate, but the stress-relief heat treatment introduced a small non-uniformity that had no correlation to position on the build plate. Analysis of the mechanical property behavior resulted in four conclusions. (1) The within-build and build-to-build tensile properties of the UNS S17400 stainless steel are less repeatable than mature engineering structural alloys, but similar to other structural alloys made by additive manufacturing. (2) The anisotropy of the mechanical properties of the UNS S17400 material of this study is larger than that of mature structural alloys, but is similar to other structural alloys made by additive manufacturing. (3) The tensile mechanical properties of the UNS S17400 material fabricated by selective laser melting are very different from those of wrought, heat-treated 17-4PH stainless steel. (4) The large discontinuous yielding strain in all tests resulted from the formation and propagation of Lüders bands. PMID:26601037

  7. Mechanical Properties of Austenitic Stainless Steel Made by Additive Manufacturing

    PubMed Central

    Luecke, William E; Slotwinski, John A

    2014-01-01

    Using uniaxial tensile and hardness testing, we evaluated the variability and anisotropy of the mechanical properties of an austenitic stainless steel, UNS S17400, manufactured by an additive process, selective laser melting. Like wrought materials, the mechanical properties depend on the orientation introduced by the processing. The recommended stress-relief heat treatment increases the tensile strength, reduces the yield strength, and decreases the extent of the discontinuous yielding. The mechanical properties, assessed by hardness, are very uniform across the build plate, but the stress-relief heat treatment introduced a small non-uniformity that had no correlation to position on the build plate. Analysis of the mechanical property behavior resulted in four conclusions. (1) The within-build and build-to-build tensile properties of the UNS S17400 stainless steel are less repeatable than mature engineering structural alloys, but similar to other structural alloys made by additive manufacturing. (2) The anisotropy of the mechanical properties of the UNS S17400 material of this study is larger than that of mature structural alloys, but is similar to other structural alloys made by additive manufacturing. (3) The tensile mechanical properties of the UNS S17400 material fabricated by selective laser melting are very different from those of wrought, heat-treated 17-4PH stainless steel. (4) The large discontinuous yielding strain in all tests resulted from the formation and propagation of Lüders bands. PMID:26601037

  8. Mechanical property characterization of polymeric composites reinforced by continuous microfibers

    NASA Astrophysics Data System (ADS)

    Zubayar, Ali

    Innumerable experimental works have been conducted to study the effect of polymerization on the potential properties of the composites. Experimental techniques are employed to understand the effects of various fibers, their volume fractions and matrix properties in polymer composites. However, these experiments require fabrication of various composites which are time consuming and cost prohibitive. Advances in computational micromechanics allow us to study the various polymer based composites by using finite element simulations. The mechanical properties of continuous fiber composite strands are directional. In traditional continuous fiber laminated composites, all fibers lie in the same plane. This provides very desirable increases in the in-plane mechanical properties, but little in the transverse mechanical properties. The effect of different fiber/matrix combinations with various orientations is also available. Overall mechanical properties of different micro continuous fiber reinforced composites with orthogonal geometry are still unavailable in the contemporary research field. In this research, the mechanical properties of advanced polymeric composite reinforced by continuous micro fiber will be characterized based on analytical investigation and FE computational modeling. Initially, we have chosen IM7/PEEK, Carbon Fiber/Nylon 6, and Carbon Fiber/Epoxy as three different case study materials for analysis. To obtain the equivalent properties of the micro-hetero structures, a concept of micro-scale representative volume elements (RVEs) is introduced. Five types of micro scale RVEs (3 square and 2 hexagonal) containing a continuous micro fiber in the polymer matrix were designed. Uniaxial tensile, lateral expansion and transverse shear tests on each RVE were designed and conducted by the finite element computer modeling software ANSYS. The formulae based on elasticity theory were derived for extracting the equivalent mechanical properties (Young's moduli, shear

  9. Quantifying tissue mechanical properties using photoplethysmography

    SciTech Connect

    Akl, Tony; Wilson, Mark A.; Ericson, Milton Nance; Cote, Gerard L.

    2014-01-01

    Photoplethysmography (PPG) is a non-invasive optical method that can be used to detect blood volume changes in the microvascular bed of tissue. The PPG signal comprises two components; a pulsatile waveform (AC) attributed to changes in the interrogated blood volume with each heartbeat, and a slowly varying baseline (DC) combining low frequency fluctuations mainly due to respiration and sympathetic nervous system activity. In this report, we investigate the AC pulsatile waveform of the PPG pulse for ultimate use in extracting information regarding the biomechanical properties of tissue and vasculature. By analyzing the rise time of the pulse in the diastole period, we show that PPG is capable of measuring changes in the Young s Modulus of tissue mimicking phantoms with a resolution of 4 KPa in the range of 12 to 61 KPa. In addition, the shape of the pulse can potentially be used to diagnose vascular complications by differentiating upstream from downstream complications. A Windkessel model was used to model changes in the biomechanical properties of the circulation and to test the proposed concept. The modeling data confirmed the response seen in vitro and showed the same trends in the PPG rise and fall times with changes in compliance and vascular resistance.

  10. Quantifying tissue mechanical properties using photoplethysmography.

    PubMed

    Akl, Tony J; Wilson, Mark A; Ericson, M Nance; Coté, Gerard L

    2014-07-01

    Photoplethysmography (PPG) is a non-invasive optical method that can be used to detect blood volume changes in the microvascular bed of tissue. The PPG signal comprises two components; a pulsatile waveform (AC) attributed to changes in the interrogated blood volume with each heartbeat, and a slowly varying baseline (DC) combining low frequency fluctuations mainly due to respiration and sympathetic nervous system activity. In this report, we investigate the AC pulsatile waveform of the PPG pulse for ultimate use in extracting information regarding the biomechanical properties of tissue and vasculature. By analyzing the rise time of the pulse in the diastole period, we show that PPG is capable of measuring changes in the Young's Modulus of tissue mimicking phantoms with a resolution of 4 KPa in the range of 12 to 61 KPa. In addition, the shape of the pulse can potentially be used to diagnose vascular complications by differentiating upstream from downstream complications. A Windkessel model was used to model changes in the biomechanical properties of the circulation and to test the proposed concept. The modeling data confirmed the response seen in vitro and showed the same trends in the PPG rise and fall times with changes in compliance and vascular resistance. PMID:25071970

  11. Quantifying tissue mechanical properties using photoplethysmography

    PubMed Central

    Akl, Tony J.; Wilson, Mark A.; Ericson, M. Nance; Coté, Gerard L.

    2014-01-01

    Photoplethysmography (PPG) is a non-invasive optical method that can be used to detect blood volume changes in the microvascular bed of tissue. The PPG signal comprises two components; a pulsatile waveform (AC) attributed to changes in the interrogated blood volume with each heartbeat, and a slowly varying baseline (DC) combining low frequency fluctuations mainly due to respiration and sympathetic nervous system activity. In this report, we investigate the AC pulsatile waveform of the PPG pulse for ultimate use in extracting information regarding the biomechanical properties of tissue and vasculature. By analyzing the rise time of the pulse in the diastole period, we show that PPG is capable of measuring changes in the Young’s Modulus of tissue mimicking phantoms with a resolution of 4 KPa in the range of 12 to 61 KPa. In addition, the shape of the pulse can potentially be used to diagnose vascular complications by differentiating upstream from downstream complications. A Windkessel model was used to model changes in the biomechanical properties of the circulation and to test the proposed concept. The modeling data confirmed the response seen in vitro and showed the same trends in the PPG rise and fall times with changes in compliance and vascular resistance. PMID:25071970

  12. Porosity and mechanical properties of zirconium ceramics

    SciTech Connect

    Kalatur, Ekaterina Narikovich, Anton; Buyakova, Svetlana E-mail: kulkov@ispms.tsc.ru; Kulkov, Sergey E-mail: kulkov@ispms.tsc.ru

    2014-11-14

    The article studies the porous ceramics consisting of ultra-fine ZrO{sub 2} powders. The porosity of ceramic samples varied from 15% to 80%. The structure of the ceramic materials had a cellular configuration. The distinctive feature of all experimentally obtained strain diagrams is their nonlinearity at low deformations characterized by the parabolic law. It was shown that the observed nonlinear elasticity for low deformations shown in strain diagrams is due to the mechanical instability of cellular elements of the ceramic framework.

  13. Mechanical properties of low-nickel stainless steel

    NASA Technical Reports Server (NTRS)

    Montano, J. W.

    1978-01-01

    Demand for improved corrosion-resistant steels, coupled with increased emphasis on conserving strategic metals, has led to development of family of stainless steels in which manganese and nitrogen are substituted for portion of usual nickel content. Advantages are approximately-doubled yield strength in annealed condition, better resistance to stress-corrosion cracking, retention of low magnetic permeability even after severe cold working, excellent strength and ductility at cryogenic temperatures, superior resistance to wear and galling, and excellent high-temperature properties.

  14. Interfaces with Tunable Mechanical and Radiosensitizing Properties.

    PubMed

    Berg, Nora G; Pearce, Brady L; Snyder, Patrick J; Rohrbaugh, Nathaniel; Nolan, Michael W; Adhikari, Prajesh; Khan, Saad A; Ivanisevic, Albena

    2016-08-31

    We report the fabrication of a composite containing nanostructured GaOOH and Matrigel with tunable radiosensitizing and stiffness properties. Composite characterization was done with microscopy and rheology. The utility of the interface was tested in vitro using fibroblasts. Cell viability and reactive oxygen species assays quantified the effects of radiation dosages and GaOOH concentrations. Fibroblasts' viability decreased with increasing concentration of GaOOH and composite stiffness. During ionizing radiation experiments the presence of the scintillating GaOOH triggered a different cellular response. Reactive oxygen species data demonstrated that one can reduce the amount of radiation needed to modulate the behavior of cells on interfaces with different stiffness containing a radiosensitizing material. PMID:26882455

  15. Characterising Mechanical Properties of Braided and Woven Textile Composite Beams

    NASA Astrophysics Data System (ADS)

    Dauda, Benjamin; Oyadiji, S. Olutunde; Potluri, Prasad

    2009-02-01

    The focus of this paper is on the manufacture of textile composite beams and on the determination of their mechanical properties. This includes investigating the effects of fibre orientation on the mechanical properties of braided and woven textile composites. Composites were manufactured from nominally identical constituents and identical consolidation processes, leaving as the only variables, variations caused by the different fibre architecture of the preform. The repeatability and, hence, reliability of this approach is demonstrated. Results obtained show that fibre architecture affects composite strength and extensibility. Composites with woven preforms are practically linear up to catastrophic failure while composites with braided preforms exhibit non-linearity prior to failure. Also the mechanical properties of the textile composite beams were determined. Results show that by tailoring the braid angle and pick density of braided and woven composite performs, the mechanical properties of the composite beams can be controlled to suit end-use requirement.

  16. Tailoring of mechanical properties of hydroformed aluminum tubes

    SciTech Connect

    Hong, Sung-tae; Lavender, Curt A.

    2007-07-06

    Tailoring of the mechanical properties of hydroformed aluminum 6063-T4 tubes to those of aluminum 6063-T6 was performed by heat treatment. Quasi-static tensile tests and a SEM analysis were conducted to evaluate the change of the mechanical properties. The experimental results of the hydroformed tubes in T4 condition (before the heat treatment) show significant variations of the mechanical properties along the length due to the different extents of work hardening by hydroforming. The experimental results of the hydroformed tubes in T6 condition (after the heat treatment) show that the precipitation hardening successfully removed the effects of the non-uniform work hardening and resulted in the uniform mechanical properties in the tube.

  17. The effect of water on the mechanical properties of soluble and insoluble ceramic cements.

    PubMed

    Koh, Ilsoo; López, Alejandro; Pinar, Ana B; Helgason, Benedikt; Ferguson, Stephen J

    2015-11-01

    Ceramic cements are good candidates for the stabilization of fractured bone due to their potential ease of application and biological advantages. New formulations of ceramic cements have been tested for their mechanical properties, including strength, stiffness, toughness and durability. The changes in the mechanical properties of a soluble cement (calcium sulfate) upon water-saturation (saturation) was reported in our previous study, highlighting the need to test ceramic cements using saturated samples. It is not clear if the changes in the mechanical properties of ceramic cements are exclusive to soluble cements. Therefore the aim of the present study was to observe the changes in the mechanical properties of soluble and insoluble ceramic cements upon saturation. A cement with high solubility (calcium sulfate dihydrate, CSD) and a cement with low solubility (dicalcium phosphate dihydrate, DCPD) were tested. Three-point bending tests were performed on four different groups of: saturated CSD, non-saturated CSD, saturated DCPD, and non-saturated DCPD samples. X-ray diffraction analysis and scanning electron microscopy were also performed on a sample from each group. Flexural strength, effective flexural modulus and flexural strain at maximum stress, lattice volume, and crystal sizes and shape were compared, independently, between saturated and non-saturated groups of CSD and DCPD. Although material dissolution did not occur in all cases, all calculated mechanical properties decreased significantly in both CSD and DCPD upon saturation. The results indicate that the reductions in the mechanical properties of saturated ceramic cements are not dependent on the solubility of a ceramic cement. The outcome raised the importance of testing any implantable ceramic cements in saturated condition to estimate its in vivo mechanical properties. PMID:26210548

  18. Mechanical properties of hydroxyapatite/mica composite.

    PubMed

    Nordström, E G; Herø, H; Jørgensen, R B

    1994-01-01

    Bend specimens of the inorganic synthetic materials hydroxyapatite (HA) and a composite of hydroxyapatite/muscovite mica have been prepared and tested mechanically. Sintering followed by hot isostatic pressing (HIP) without encapsulation gave an increased strength for HA alone, but no significant increase in strength compared with sintering alone for HA/mica composites. The bend strength of the HA/mica composite was inferior to that of HA alone, the reason being inadequate bonding between HA and mica. HIP in glass capsules and an increased cold compaction pressure tended to improve the bend strength of the composite. Corrosion in tris for 7 d did not affect the bend strength of the investigated materials significantly. PMID:7950878

  19. Processing effects on the mechanical properties of tungsten heavy alloys

    NASA Technical Reports Server (NTRS)

    Kishi, Toshihito; German, R. M.

    1990-01-01

    Tungsten heavy alloys exhibit significant mechanical property sensitivities to the fabrication variables. These sensitivities are illustrated in this examination of vacuum sintering and the effects of composition, sintering temperature, and sintering time on the mechanical properties of tungsten heavy alloys. Measurements were conducted to assess the density, strength, hardness, and elongation dependencies. A detrimental aspect of vacuum sintering is matrix phase evaporation, although vacuum sintering does eliminate the need for postsintering heat treatments.

  20. Structure, mechanical properties, and fracture of 20GL cast steel

    NASA Astrophysics Data System (ADS)

    Schastlivtsev, V. M.; Tabatchikova, T. I.; Yakovleva, I. L.; Klyueva, S. Yu.

    2014-04-01

    The structure and mechanical properties of 20GL steel are studied. It is shown that a significant decrease in the ductility and impact toughness of the steel is caused by intercrystalline fracture, which is induced by a weakening of the intercrystallite bonds due to the existence of coarse lamellar pearlite and nonmetallic inclusions, namely, film inclusions and eutectic-type oxysulfides, at the boundaries of primary crystals. Annealing from a temperature in the intercritical range is found to improve the mechanical properties.

  1. Primate dietary ecology in the context of food mechanical properties.

    PubMed

    Coiner-Collier, Susan; Scott, Robert S; Chalk-Wilayto, Janine; Cheyne, Susan M; Constantino, Paul; Dominy, Nathaniel J; Elgart, Alison A; Glowacka, Halszka; Loyola, Laura C; Ossi-Lupo, Kerry; Raguet-Schofield, Melissa; Talebi, Mauricio G; Sala, Enrico A; Sieradzy, Pawel; Taylor, Andrea B; Vinyard, Christopher J; Wright, Barth W; Yamashita, Nayuta; Lucas, Peter W; Vogel, Erin R

    2016-09-01

    Substantial variation exists in the mechanical properties of foods consumed by primate species. This variation is known to influence food selection and ingestion among non-human primates, yet no large-scale comparative study has examined the relationships between food mechanical properties and feeding strategies. Here, we present comparative data on the Young's modulus and fracture toughness of natural foods in the diets of 31 primate species. We use these data to examine the relationships between food mechanical properties and dietary quality, body mass, and feeding time. We also examine the relationship between food mechanical properties and categorical concepts of diet that are often used to infer food mechanical properties. We found that traditional dietary categories, such as folivory and frugivory, did not faithfully track food mechanical properties. Additionally, our estimate of dietary quality was not significantly correlated with either toughness or Young's modulus. We found a complex relationship among food mechanical properties, body mass, and feeding time, with a potential interaction between median toughness and body mass. The relationship between mean toughness and feeding time is straightforward: feeding time increases as toughness increases. However, when considering median toughness, the relationship with feeding time may depend upon body mass, such that smaller primates increase their feeding time in response to an increase in median dietary toughness, whereas larger primates may feed for shorter periods of time as toughness increases. Our results emphasize the need for additional studies quantifying the mechanical and chemical properties of primate diets so that they may be meaningfully compared to research on feeding behavior and jaw morphology. PMID:27542555

  2. Simulated effect on the compressive and shear mechanical properties of bionic integrated honeycomb plates.

    PubMed

    He, Chenglin; Chen, Jinxiang; Wu, Zhishen; Xie, Juan; Zu, Qiao; Lu, Yun

    2015-05-01

    Honeycomb plates can be applied in many fields, including furniture manufacturing, mechanical engineering, civil engineering, transportation and aerospace. In the present study, we discuss the simulated effect on the mechanical properties of bionic integrated honeycomb plates by investigating the compressive and shear failure modes and the mechanical properties of trabeculae reinforced by long or short fibers. The results indicate that the simulated effect represents approximately 80% and 70% of the compressive and shear strengths, respectively. Compared with existing bionic samples, the mass-specific strength was significantly improved. Therefore, this integrated honeycomb technology remains the most effective method for the trial manufacturing of bionic integrated honeycomb plates. The simulated effect of the compressive rigidity is approximately 85%. The short-fiber trabeculae have an advantage over the long-fiber trabeculae in terms of shear rigidity, which provides new evidence for the application of integrated bionic honeycomb plates. PMID:25746272

  3. Alterations in mechanical properties are associated with prostate cancer progression.

    PubMed

    Wang, Xuejian; Wang, Jianbo; Liu, Yingxi; Zong, Huafeng; Che, Xiangyu; Zheng, Wei; Chen, Feng; Zhu, Zheng; Yang, Deyong; Song, Xishuang

    2014-03-01

    Cancer progression and metastasis have been shown to be accompanied by alterations in the mechanical properties of tissues, but the relationship between the mechanical properties and malignant behavior in prostate cancer (Pca) is less clear. The aims of this study were to detect the mechanical properties of benign prostatic hyperplasia (BPH) and Pca tissues on both the macro- and micro-scales, to explore the relationships between mechanical properties and malignant behavior and, finally, to identify the important molecules in the mechanotransduction signaling pathway. We demonstrated that the strain index of Pca tissue was significantly higher than that of BPH tissue on the macro-scale but the Young's modulus of the Pca tissues, especially in advanced Pca, was lower than that of BPH tissues on the micro-scale. These two seemingly contradictory results can be explained by the excessive proliferation of tumor cells (Ki-67) and the degradation of scaffold proteins (collagens). These data indicate that alterations of the macro- and micro-mechanical properties of Pca tissues with malignant behavior are contradictory. The mechanical properties of tissues might be useful as a new risk factor for malignancy and metastasis in Pca. Furthermore, collagens, matrix metalloproteinase, fibronectin, and integrins might be the important molecules in the mechanotransduction signaling pathway. PMID:24504844

  4. Understanding and Tailoring the Mechanical Properties of LIGA Fabricated Materials

    SciTech Connect

    Buchheit, T.E.; Christenson, T.R.; Lavan, D.A.; Schmale, D.T.

    1999-01-25

    LIGA fabricated materials and components exhibit several processing issues affecting their metallurgical and mechanical properties, potentially limiting their usefulness for MEMS applications. For example, LIGA processing by metal electrodeposition is very sensitive to deposition conditions which causes significant processing lot variations of mechanical and metallurgical properties. Furthermore, the process produces a material with a highly textured lenticular rnicrostructural morphology suggesting an anisotropic material response. Understanding and controlling out-of-plane anisotropy is desirable for LIGA components designed for out-of-plane flexures. Previous work by the current authors focused on results from a miniature servo-hydraulic mechanical test frame constructed for characterizing LIGA materials. Those results demonstrated microstructural and mechanical properties dependencies with plating bath current density in LIGA fabricated nickel (LIGA Ni). This presentation builds on that work and fosters a methodology for controlling the properties of LIGA fabricated materials through processing. New results include measurement of mechanical properties of LIGA fabricated copper (LIGA Cu), out-of-plane and localized mechanical property measurements using compression testing and nanoindentation of LIGA Ni and LIGA Cu.

  5. In Vitro Tissue Differentiation using Dynamics of Tissue Mechanical Properties

    NASA Astrophysics Data System (ADS)

    Lin, Wei-Chiang; Phillips, Paul J.

    2002-03-01

    Dynamics of tissue mechanical properties of various human tissue types were studied at macroscopic as well as microscopic level in vitro. This study was conducted to enable the development of a feedback system based on dynamics of tissue mechanical properties for intraoperative guidance for tumor treatment (e.g., RF ablation of liver tumor) and noninvasive tumor localization. Human liver tissues, including normal, cancerous, and cirrhotic tissues, were obtained from patients receiving liver transplant or tumor resection at Vanderbilt University Medical Center with the approval of the Vanderbilt Institutional Review Board. Tissue samples, once resected from the patients, were snap-frozen using liquid nitrogen and stored at -70 oC. Measurements of the mechanical properties of these tissue samples were conducted at the University of Tennessee at Knoxville. Dynamics of tissue mechanical properties were measured from both native and thermally coagulated tissue samples at macroscopic and microscopic level. Preliminary results suggest the dynamics of mechanical properties of normal liver tissues are very different from those of cancerous liver tissues. The correlation between the dynamics of mechanical properties at macroscopic level and those at microscopic level is currently under investigation.

  6. Mechanical properties of iron-aluminum alloys

    SciTech Connect

    Alexander, D.J.; Sikka, V.K.

    1993-07-01

    Tensile and impact tests have been conducted on specimens for a series of five heats of iron-aluminum alloys. These results have been compared to data for the iron aluminide alloy FA-129. The first of the new alloys was a simple ternary alloy with iron, aluminum, and chromium contents that matched the FA-129 composition. The second was similar but with additions of zirconium and carbon. Three heats were produced with reduced aluminum contents so that a disordered body-centered cubic structure would be present. Additions of titanium or yttrium were included. The ductile-to brittle transition temperatures of all of the Fe{sub 3}Al alloys were similar, but the simple ternary alloy had a much higher upper-shelf energy levels than the Fe{sub 3}Al type alloys. The reduced aluminum alloy with the yttrium addition showed excellent tensile properties, with a room temperature total elongation of over 40%, and a very high upper-shelf energy level. Despite the high tensile ductility at room temperature, the transition temperature of the yttrium-containing alloy was still about 150{degrees}C, compared to approximately 300{degrees}C for FA-129.

  7. Mechanical properties of branched actin filaments.

    PubMed

    Razbin, Mohammadhosein; Falcke, Martin; Benetatos, Panayotis; Zippelius, Annette

    2015-07-01

    Cells moving on a two dimensional substrate generate motion by polymerizing actin filament networks inside a flat membrane protrusion. New filaments are generated by branching off existing ones, giving rise to branched network structures. We investigate the force-extension relation of branched filaments, grafted on an elastic structure at one end and pushing with the free ends against the leading edge cell membrane. Single filaments are modeled as worm-like chains, whose thermal bending fluctuations are restricted by the leading edge cell membrane, resulting in an effective force. Branching can increase the stiffness considerably; however the effect depends on branch point position and filament orientation, being most pronounced for intermediate tilt angles and intermediate branch point positions. We describe filament networks without cross-linkers to focus on the effect of branching. We use randomly positioned branch points, as generated in the process of treadmilling, and orientation distributions as measured in lamellipodia. These networks reproduce both the weak and strong force response of lamellipodia as measured in force-velocity experiments. We compare properties of branched and unbranched networks. The ratio of the network average of the force per branched filament to the average force per unbranched filament depends on the orientation distribution of the filaments. The ratio exhibits compression dependence and may go up to about 4.5 in networks with a narrow orientation distribution. With orientation distributions measured in lamellipodia, it is about two and essentially independent from network compression, graft elasticity and filament persistence length. PMID:26040560

  8. Mechanical properties of porcine intralobar pulmonary arteries.

    PubMed

    Ohtaka, H; Hogg, J C; Moreno, R H; Paré, P D; Schellenberg, R R

    1988-04-01

    The isobaric and isovolumetric properties of intrapulmonary arteries were evaluated by placing a highly compliant balloon inside arterial segments. The passive pressure-volume (P-V) curve was obtained by changing volume (0.004 ml/s) and measuring pressure. The isobaric active volume change (delta V) or isovolumetric active pressure change (delta P) generated by submaximal histamine was measured at four different transmural pressures (Ptm's) reached by balloon inflation. The maximal delta P = 11.2 +/- 0.6 cmH2O (mean +/- SE) was achieved at 30.8 +/- 1.2 cmH2O Ptm and maximal delta V = 0.20 +/- 0.02 ml at 16.7 +/- 1.7 cmH2O Ptm. The P-V relationships were similar when volume was increased after either isobaric or isovolumetric contraction. The calculated length-tension (L-T) relationship showed that the active tension curve was relatively flat and that the passive tension at the optimal length was 149 +/- 11% of maximal active tension. These data show that 1) a large elastic component operates in parallel with the smooth muscle in intralobar pulmonary arteries, and 2) the change in resistance associated with vascular expansion of the proximal arteries is independent of the type of contraction that occurs in the more distal arterial segments. PMID:3378988

  9. Mechanical properties of branched actin filaments

    NASA Astrophysics Data System (ADS)

    Razbin, Mohammadhosein; Falcke, Martin; Benetatos, Panayotis; Zippelius, Annette

    2015-07-01

    Cells moving on a two dimensional substrate generate motion by polymerizing actin filament networks inside a flat membrane protrusion. New filaments are generated by branching off existing ones, giving rise to branched network structures. We investigate the force-extension relation of branched filaments, grafted on an elastic structure at one end and pushing with the free ends against the leading edge cell membrane. Single filaments are modeled as worm-like chains, whose thermal bending fluctuations are restricted by the leading edge cell membrane, resulting in an effective force. Branching can increase the stiffness considerably; however the effect depends on branch point position and filament orientation, being most pronounced for intermediate tilt angles and intermediate branch point positions. We describe filament networks without cross-linkers to focus on the effect of branching. We use randomly positioned branch points, as generated in the process of treadmilling, and orientation distributions as measured in lamellipodia. These networks reproduce both the weak and strong force response of lamellipodia as measured in force-velocity experiments. We compare properties of branched and unbranched networks. The ratio of the network average of the force per branched filament to the average force per unbranched filament depends on the orientation distribution of the filaments. The ratio exhibits compression dependence and may go up to about 4.5 in networks with a narrow orientation distribution. With orientation distributions measured in lamellipodia, it is about two and essentially independent from network compression, graft elasticity and filament persistence length.

  10. STARCH FILLED TERNARY POLYMER COMPOSITES I: DYNAMIC MECHANICAL PROPERTIES

    Technology Transfer Automated Retrieval System (TEKTRAN)

    It has been shown that the dynamic mechanical properties of starch filled blends of polyethylene (PE) and poly (hydroxy ester ether) (PHEE) are strongly dependent on the properties and distribution of the minor component of the blend (PHEE). The effect of this minor component on the viscoelastic pr...

  11. Porosity and mechanical properties of zirconium ceramics

    SciTech Connect

    Buyakova, S. Kulkov, S.; Sablina, T.

    2015-11-17

    Has been studied a porous ceramics obtained from ultra-fine powders. Porous ceramic ZrO{sub 2}(MgO), ZrO{sub 2}(Y{sub 2}O{sub 3}) powder was prepared by pressing and subsequent sintering of compacts homologous temperatures ranging from 0.63 to 0.56 during the isothermal holding duration of 1 to 5 hours. The porosity of ceramic samples was from 15 to 80%. The structure of the ceramic materials produced from plasma-sprayed ZrO{sub 2} powder was represented as a system of cell and rod structure elements. Cellular structure formed by stacking hollow powder particles can be easily seen at the images of fracture surfaces of obtained ceramics. There were three types of pores in ceramics: large cellular hollow spaces, small interparticle pores which are not filled with powder particles and the smallest pores in the shells of cells. The cells generally did not have regular shapes. The size of the interior of the cells many times exceeded the thickness of the walls which was a single-layer packing of ZrO{sub 2} grains. A distinctive feature of all deformation diagrams obtained in the experiment was their nonlinearity at low deformations which was described by the parabolic law. It was shown that the observed nonlinear elasticity for low deformation on deformation diagrams is due to mechanical instability of the cellular elements in the ceramic carcass.

  12. Mechanical properties of lanthanum and yttrium chromites

    SciTech Connect

    Paulik, S.W.; Armstrong, T.R.

    1996-12-31

    In an operating high-temperature (1000{degrees}C) solid oxide fuel cell (SOFC), the interconnect separates the fuel (P(O{sub 2}){approx}10{sup -16} atm) and the oxidant (P(O2){approx}10{sup 0.2} atm), while being electrically conductive and connecting the cells in series. Such severe atmospheric and thermal demands greatly reduce the number of viable candidate materials. Only two materials, acceptor substituted lanthanum chromite and yttrium chromite, meet these severe requirements. In acceptor substituted chromites (Sr{sup 2+} or Ca{sup 2+} for La{sup 3+}), charge compensation is primarily electronic in oxidizing conditions (through the formation of Cr{sup 4+}). Under reducing conditions, ionic charge compensation becomes significant as the lattice becomes oxygen deficient. The formation of oxygen vacancies is accompanied by the reduction of Cr{sup 4+} ions to Cr{sup 3+} and a resultant lattice expansion. The lattice expansion observed in large chemical potential gradients is not desirable and has been found to result in greatly reduced mechanical strength.

  13. Mechanical and Thermophysical Properties of Cerium Monopnictides

    NASA Astrophysics Data System (ADS)

    Bhalla, Vyoma; Singh, Devraj; Jain, S. K.

    2016-03-01

    The ultrasonic attenuation due to phonon-phonon interaction, thermoelastic relaxation and dislocation damping mechanisms has been investigated in cerium monopnictides CeX (X: N, P, As, Sb and Bi) for longitudinal and shear waves along {< }100{rangle }, {< }110{rangle } and {< }111{rangle } directions. The second- and third-order elastic constants of CeX have also been computed in the temperature range 0 K to 500 K using Coulomb and Born-Mayer potential upto second nearest neighbours. The computed values of these elastic constants have been applied to find out Young's moduli, bulk moduli, Breazeale's non-linearity parameters, Zener anisotropy, ultrasonic velocity, ultrasonic Grüneisen parameter, thermal relaxation time, acoustic coupling constants and ultrasonic attenuation. The fracture/toughness ratio is less than 1.75, which shows that the chosen materials are brittle in nature as found for other monopnictides. The drag coefficient acting on the motion of screw and edge dislocations due to shear and compressional phonon viscosities of the lattice have also been evaluated for both the longitudinal and shear waves. The thermoelastic loss and dislocation damping loss are negligible in comparison to loss due to Akhieser damping (phonon-phonon interaction). The obtained results for CeX are in qualitative agreement with other semi-metallic monopnictides.

  14. Porosity and mechanical properties of zirconium ceramics

    NASA Astrophysics Data System (ADS)

    Buyakova, S.; Sablina, T.; Kulkov, S.

    2015-11-01

    Has been studied a porous ceramics obtained from ultra-fine powders. Porous ceramic ZrO2(MgO), ZrO2(Y2O3) powder was prepared by pressing and subsequent sintering of compacts homologous temperatures ranging from 0.63 to 0.56 during the isothermal holding duration of 1 to 5 hours. The porosity of ceramic samples was from 15 to 80%. The structure of the ceramic materials produced from plasma-sprayed ZrO2 powder was represented as a system of cell and rod structure elements. Cellular structure formed by stacking hollow powder particles can be easily seen at the images of fracture surfaces of obtained ceramics. There were three types of pores in ceramics: large cellular hollow spaces, small interparticle pores which are not filled with powder particles and the smallest pores in the shells of cells. The cells generally did not have regular shapes. The size of the interior of the cells many times exceeded the thickness of the walls which was a single-layer packing of ZrO2 grains. A distinctive feature of all deformation diagrams obtained in the experiment was their nonlinearity at low deformations which was described by the parabolic law. It was shown that the observed nonlinear elasticity for low deformation on deformation diagrams is due to mechanical instability of the cellular elements in the ceramic carcass.

  15. Measuring the mechanical properties of molecular conformers

    PubMed Central

    Jarvis, S. P.; Taylor, S.; Baran, J. D.; Champness, N. R.; Larsson, J. A.; Moriarty, P.

    2015-01-01

    Scanning probe-actuated single molecule manipulation has proven to be an exceptionally powerful tool for the systematic atomic-scale interrogation of molecular adsorbates. To date, however, the extent to which molecular conformation affects the force required to push or pull a single molecule has not been explored. Here we probe the mechanochemical response of two tetra(4-bromophenyl)porphyrin conformers using non-contact atomic force microscopy where we find a large difference between the lateral forces required for manipulation. Remarkably, despite sharing very similar adsorption characteristics, variations in the potential energy surface are capable of prohibiting probe-induced positioning of one conformer, while simultaneously permitting manipulation of the alternative conformational form. Our results are interpreted in the context of dispersion-corrected density functional theory calculations which reveal significant differences in the diffusion barriers for each conformer. These results demonstrate that conformational variation significantly modifies the mechanical response of even simple porpyhrins, potentially affecting many other flexible molecules. PMID:26388232

  16. Fluid mechanical properties of flames in enclosures

    SciTech Connect

    Rotman, D.A.; Pindera, M.Z.; Oppenheim, A.K.

    1988-07-01

    In an enclosure where the reacting medium is initially at rest, the flame first generates a flowfield that then gets stretched, i.e., its front is pulled along the surface by the flowfield in which it then finds itself residing. A methodology developed for numerical modeling of such fields is described. Of key significance in this respect is the zero Mach number model/endash/a reasonable idealization in view of the relatively high temperature, and hence sound speed, that exists, concomitantly with a comparatively low particle velocity, in the confinement of a combustion chamber. According to this model, the density gradient in the field is nullified, while across the flame front it approaches infinity. One has thus two regimes: one of the unburned medium and the other of the burned gas, each of spatially uniform density, separated by a flame front interface. The latter is endowed with four properties, of which the first two are purely kinematic and the others dynamic in nature, namely: 1) it is advected at the local velocity of flow; 2) it self-advances at the normal burning speed, the eigenvalue of the system; 3) it acts as the velocity source due to the exothermicity of the combustion process; and 4) it acts as the vorticity source due to the baroclinic effect generated by the pressure gradient along its surface and the density gradient across it. A solution obtained for a flame propagating in an oblong rectangular enclosure demonstrates that the latter has a significant influence upon the formation of the well known tulip shape. 12 refs., 4 figs.

  17. A low-riding patella in posterior stabilised total knee replacements alters quadriceps' mechanical advantage, resulting in reduced knee flexion moments.

    PubMed

    Ward, T R; Pandit, H; Hollinghurst, D; Zavatsky, A B; Gill, H S; Thomas, N P; Murray, D W

    2012-08-01

    Abnormal in vivo Total Knee Replacement (TKR) kinetics is influenced by a range of factors, particularly by changes to the knee's geometric parameters such as the patellar tendon moment arm (PTMA). In this study, ground reaction force (GRF) measurements were combined with simultaneous fluoroscopic image measurements to investigate the relationship between abnormal TKR kinetics and geometric parameters. Nine Scorpio Cruciate Retaining (CR) TKR (Stryker, Newbury, UK), nine Scorpio Posterior Stabilized (PS) TKR and seven normal subjects performed a step-up activity on a forceplate in view of a fluoroscope. The TKR subjects were part of a larger ongoing randomised controlled trial. The maximum external knee flexion moment was 22.0% lower in the Scorpio PS group compared to the Scorpio CR group. No significant differences in PTMA were found between the groups. The Scorpio PS had a low-riding patella, with a 30.7% reduction in patellar height compared to the Scorpio CR. This was probably due to using a thick tibial insert after PCL release in the PS, and led to an 8° increase in patellar flexion angle which altered the patellar mechanism and reduced quadriceps' mechanical advantage. Consequently, PS subjects stepped-up more cautiously with a reduced knee flexion moment. PMID:22015171

  18. Structures and Mechanical Properties of Natural and Synthetic Diamonds. Chapter 8

    NASA Technical Reports Server (NTRS)

    Miyoshi, Kazuhisa

    1998-01-01

    A revolution in diamond technology is in progress as the low-pressure process becomes an industrial reality. It will soon be possible to take advantage of the demanding properties of diamond to develop a myriad of new applications, particularly for self-lubricating, wear, and superhard coatings. The production of large diamond films or sheets at low cost, a distinct possibility in the not-too-distant future, may drastically change tribology technology, particularly solid lubricants and lubricating materials and systems. This chapter reviews the structures and properties of natural and synthetic diamond to gain a better understanding of the tribological properties of diamond and related materials to be described in the following chapters. Atomic and crystal structure, impurities, mechanical properties, and indentation hardness of diamond are described.

  19. Mechanical and biological properties of keratose biomaterials.

    PubMed

    de Guzman, Roche C; Merrill, Michelle R; Richter, Jillian R; Hamzi, Rawad I; Greengauz-Roberts, Olga K; Van Dyke, Mark E

    2011-11-01

    The oxidized form of extractable human hair keratin proteins, commonly referred to as keratose, is gaining interest as a biomaterial for multiple tissue engineering studies including those directed toward peripheral nerve, spinal cord, skin, and bone regeneration. Unlike its disulfide cross-linked counterpart, kerateine, keratose does not possess a covalently cross-linked network structure and consequently displays substantially different characteristics. In order to understand its mode(s) of action and potential for clinical translatability, detailed characterization of the composition, physical properties, and biological responses of keratose biomaterials are needed. Keratose was obtained from end-cut human hair fibers by peracetic acid treatment, followed by base extraction, and subsequent dialysis. Analysis of lyophilized keratose powder determined that it contains 99% proteins by mass with amino acid content similar to human hair cortex. Metallic elements were also found in minute quantities. Protein oxidation led to disulfide bond cleavage and drastic reduction of free thiols due to conversion of sulfhydryl to sulfonic acid, chain fragmentation, and amino acid modifications. Mass spectrometry identified the major protein constituents as a heterogeneous mixture of 15 hair keratins (type I: K31-35 and K37-39, and type II: K81-86) with small amounts of epithelial keratins which exist in monomeric, dimeric, multimeric, and even degraded forms. Re-hydration with PBS enabled molecular assembly into an elastic solid-like hydrogel. Highly-porous scaffolds formed by lyophilization of the gel had the compression behavior of a cellular foam material and reverted back to gel upon wetting. Cytotoxicity assays showed that the EC50 for various cell lines were attained at 8-10 mg/mL keratose, indicating the non-toxic nature of the material. Implantation in mouse subcutaneous tissue pockets demonstrated that keratose resorption follows a rectangular hyperbolic regression

  20. Dynamic monitoring of cell mechanical properties using profile microindentation

    PubMed Central

    Guillou, L.; Babataheri, A.; Puech, P.-H.; Barakat, A. I.; Husson, J.

    2016-01-01

    We have developed a simple and relatively inexpensive system to visualize adherent cells in profile while measuring their mechanical properties using microindentation. The setup allows simultaneous control of cell microenvironment by introducing a micropipette for the delivery of soluble factors or other cell types. We validate this technique against atomic force microscopy measurements and, as a proof of concept, measure the viscoelastic properties of vascular endothelial cells in terms of an apparent stiffness and a dimensionless parameter that describes stress relaxation. Furthermore, we use this technique to monitor the time evolution of these mechanical properties as the cells’ actin is depolymerized using cytochalasin-D. PMID:26857265

  1. Mechanical Properties of Continuous Fiber Reinforced Zirconium Diboride Matrix Composites

    NASA Technical Reports Server (NTRS)

    Stuffle, Kevin; Creegan, Peter; Nowell, Steven; Bull, Jeffrey D.; Rasky, Daniel J. (Technical Monitor)

    1995-01-01

    Continuous fiber reinforced zirconium diboride matrix composites, SCS-9a-(RBSiCZrB2)matrix, are being developed for leading edge, rocket nozzle and turbine engine applications. Recently, the composite materials have been characterized for tensile properties to 1250 C, the highest temperature tested. The tensile properties are fiber dominated as the matrix is microcracked on fabrication, but favorable failure characteristic are observed. Compression and shear mechanical testing results will be reported if completed. The effects of fiber volume fraction and matrix density on mechanical properties will be discussed. The target applications of the materials will be discussed. Specific testing being performed towards qualification for these applications will be included.

  2. Dynamic monitoring of cell mechanical properties using profile microindentation.

    PubMed

    Guillou, L; Babataheri, A; Puech, P-H; Barakat, A I; Husson, J

    2016-01-01

    We have developed a simple and relatively inexpensive system to visualize adherent cells in profile while measuring their mechanical properties using microindentation. The setup allows simultaneous control of cell microenvironment by introducing a micropipette for the delivery of soluble factors or other cell types. We validate this technique against atomic force microscopy measurements and, as a proof of concept, measure the viscoelastic properties of vascular endothelial cells in terms of an apparent stiffness and a dimensionless parameter that describes stress relaxation. Furthermore, we use this technique to monitor the time evolution of these mechanical properties as the cells' actin is depolymerized using cytochalasin-D. PMID:26857265

  3. Dynamic monitoring of cell mechanical properties using profile microindentation

    NASA Astrophysics Data System (ADS)

    Guillou, L.; Babataheri, A.; Puech, P.-H.; Barakat, A. I.; Husson, J.

    2016-02-01

    We have developed a simple and relatively inexpensive system to visualize adherent cells in profile while measuring their mechanical properties using microindentation. The setup allows simultaneous control of cell microenvironment by introducing a micropipette for the delivery of soluble factors or other cell types. We validate this technique against atomic force microscopy measurements and, as a proof of concept, measure the viscoelastic properties of vascular endothelial cells in terms of an apparent stiffness and a dimensionless parameter that describes stress relaxation. Furthermore, we use this technique to monitor the time evolution of these mechanical properties as the cells’ actin is depolymerized using cytochalasin-D.

  4. Mapping the mechanical properties of cholesterol-containing supported lipid bilayers with nanoscale spatial resolution.

    PubMed

    Shamitko-Klingensmith, Nicole; Molchanoff, Kelley M; Burke, Kathleen A; Magnone, George J; Legleiter, Justin

    2012-09-18

    It has been demonstrated that many biological processes are influenced by mechanical changes in membranes comprised of a variety of lipid components. As a result, the ability to map physicomechanical properties of surfaces with high temporal and spatial resolution is desirable. Tapping mode atomic force microscopy (AFM) has proven to be a useful technique for imaging biological surfaces due to its ability to operate in solution; however, access to information concerning the mechanical properties of these surfaces can also be obtained by reconstructing the time-resolved tip/sample force interactions during the imaging process. An advantage of such an approach is the direct correlation of topographical features with mechanical properties. Reconstruction of the tip/sample force is achievable by a technique called scanning probe acceleration microscopy (SPAM), which treats the cantilever as an accelerometer. The acceleration, which is directly related to the tip/sample force, of the cantilever is obtained by taking the second derivative of the cantilever deflection signal during a tapping mode AFM experiment in solution with standard cantilevers. Herein, we describe the applicability of SPAM to study mechanical properties of supported lipid bilayers with nanoscale spatial resolution via numerical simulations and experiment. The maximum and minimum tapping forces respond to changes in specific surface mechanical properties. Furthermore, we demonstrate how these changes can be used to map relative changes in the Young's modulus and adhesive properties of supported total brain lipid extract bilayers containing exogenous cholesterol. Finally, the ability of SPAM to distinguish nanoscale lipid raft domains based on changes in local mechanical properties is demonstrated. PMID:22924735

  5. Balanced bilingualism and early age of second language acquisition as the underlying mechanisms of a bilingual executive control advantage: why variations in bilingual experiences matter.

    PubMed

    Yow, W Quin; Li, Xiaoqian

    2015-01-01

    Recent studies revealed inconsistent evidences of a bilingual advantage in executive processing. One potential source of explanation is the multifaceted experience of the bilinguals in these studies. This study seeks to test whether bilinguals who engage in language selection more frequently would perform better in executive control tasks than those bilinguals who engage in language selection less frequently. We examined the influence of the degree of bilingualism (i.e., language proficiency, frequency of use of two languages, and age of second language acquisition) on executive functioning in bilingual young adults using a comprehensive battery of executive control tasks. Seventy-two 18- to 25-years-old English-Mandarin bilinguals performed four computerized executive function (EF) tasks (Stroop, Eriksen flanker, number-letter switching, and n-back task) that measure the EF components: inhibition, mental-set shifting, and information updating and monitoring. Results from multiple regression analyses, structural equation modeling, and bootstrapping supported the positive association between age of second language acquisition and the interference cost in the Stroop task. Most importantly, we found a significant effect of balanced bilingualism (balanced usage of and balanced proficiency in two languages) on the Stroop and number-letter task (mixing cost only), indicating that a more balanced use and a more balanced level of proficiency in two languages resulted in better executive control skills in the adult bilinguals. We did not find any significant effect of bilingualism on flanker or n-back task. These findings provided important insights to the underlying mechanisms of the bilingual cognitive advantage hypothesis, demonstrating that regular experience with extensive practice in controlling attention to their two language systems results in better performance in related EFs such as inhibiting prepotent responses and global set-shifting. PMID:25767451

  6. Balanced bilingualism and early age of second language acquisition as the underlying mechanisms of a bilingual executive control advantage: why variations in bilingual experiences matter

    PubMed Central

    Yow, W. Quin; Li, Xiaoqian

    2015-01-01

    Recent studies revealed inconsistent evidences of a bilingual advantage in executive processing. One potential source of explanation is the multifaceted experience of the bilinguals in these studies. This study seeks to test whether bilinguals who engage in language selection more frequently would perform better in executive control tasks than those bilinguals who engage in language selection less frequently. We examined the influence of the degree of bilingualism (i.e., language proficiency, frequency of use of two languages, and age of second language acquisition) on executive functioning in bilingual young adults using a comprehensive battery of executive control tasks. Seventy-two 18- to 25-years-old English–Mandarin bilinguals performed four computerized executive function (EF) tasks (Stroop, Eriksen flanker, number–letter switching, and n-back task) that measure the EF components: inhibition, mental-set shifting, and information updating and monitoring. Results from multiple regression analyses, structural equation modeling, and bootstrapping supported the positive association between age of second language acquisition and the interference cost in the Stroop task. Most importantly, we found a significant effect of balanced bilingualism (balanced usage of and balanced proficiency in two languages) on the Stroop and number–letter task (mixing cost only), indicating that a more balanced use and a more balanced level of proficiency in two languages resulted in better executive control skills in the adult bilinguals. We did not find any significant effect of bilingualism on flanker or n-back task. These findings provided important insights to the underlying mechanisms of the bilingual cognitive advantage hypothesis, demonstrating that regular experience with extensive practice in controlling attention to their two language systems results in better performance in related EFs such as inhibiting prepotent responses and global set-shifting. PMID:25767451

  7. Mechanical Properties and Durability of "Waterless Concrete"

    NASA Technical Reports Server (NTRS)

    Toutanji, Houssam; Grugel, Richard N.

    2008-01-01

    Waterless concrete consists of molten elementary sulfur and aggregate. The aggregates in lunar environment will be lunar rocks and soil. Sulfur is present on the Moon in Troilite soil (FeS) and by oxidation soil iron and sulfur can be produced. Iron can be used to reinforce the sulfur concrete. Sulfur concrete specimens were cycled between liquid nitrogen (approximately 191 C) and room temperature (approximately 21 C) to simulate exposure to a lunar environment. Cycled and control specimens were subsequently tested in compression at room temperatures (approximately 21 C) and approximately 101 C. Test results showed that due to temperature cycling, compressive strength of cycled specimens was 20% of those non-cycled. Microscopic examination of the fracture surfaces from the cycled samples showed clear de-bonding of the sulfur from the aggregate material whereas it was seen well bonded in those non-cycled. This reduction in strength can be attributed to the large differences in thermal coefficients of expansion of the materials constituting the concrete which promoted cracking. Similar sulfur concrete mixtures were strengthened with short and long glass fibers. The glass fibers from lunar regolith simulant was melted in a 25 cc Pt-Rh crucible in a Sybron Thermoline high temperature MoSi2 furnace at melting temperatures of 1450 to 1600 C for times of 30 min to 1 hour. Glass fibers were cast from the melt into graphite crucibles and were annealed for a couple of hours at 600 C. Glass fibers and small rods were pulled from the melt. The glass melt wets the ceramic rod and long continuous glass fibers were easily hand drawn. The glass fibers were immediately coated with a protective polymer to maintain the mechanical strength. The glass fibers were used to reinforce sulfur concrete plated to improve the flexural strength of the sulfur concrete. Prisms beams strengthened with glass fibers were tested in 4-point bending test. Beams strengthened with glass fiber showed to

  8. Improving mechanical and biological properties of macroporous HA scaffolds through composite coatings.

    PubMed

    Zhao, J; Lu, X; Duan, K; Guo, L Y; Zhou, S B; Weng, J

    2009-11-01

    Interconnected porous hydroxyapatite (HA) scaffolds are widely used for bone repair and replacement, owing to their ability to support the adhesion, transfer, proliferation and differentiation of cells. In the present study, the polymer impregnation approach was adopted to produce porous HA scaffolds with three-dimensional (3D) porous structures. These scaffolds have an advantage of highly interconnected porosity (approximately 85%) but a drawback of poor mechanical strength. Therefore, the as-prepared HA scaffolds were lined with composite polymer coatings in order to improve the mechanical properties and retain its good bioactivity and biocompatibility at the same time. The composite coatings were based on poly(D,L-lactide) (PDLLA) polymer solutions, and contained single component or combination of HA, calcium sulfate (CS) and chondroitin sulfate (ChS) powders. The effects of composite coatings on scaffold porosity, microstructure, mechanical property, in vitro mineralizing behavior, and cell attachment of the resultant scaffolds were investigated. The results showed that the scaffolds with composite coatings resulted in significant improvement in both mechanical and biological properties while retaining the 3D interconnected porous structure. The in vitro mineralizing behaviors were mainly related to the compositions of CS and ChS powders in the composite coatings. Excellent cell attachments were observed on the pure HA scaffold as well as the three types of composite scaffolds. These composite scaffolds with improved mechanical properties and bioactivities are promising bone substitutes in tissue engineering fields. PMID:19679453

  9. Research Concerning The Mechanical And Structural Properties Of Warm Rolled Construction Carbon Steels

    SciTech Connect

    Medrea, C.; Negrea, G.; Domsa, S.

    2007-04-07

    Construction carbon steels represent an important steel class due to the large quantity in which it is produced. Generally, these steels are delivered in as-rolled or normalized condition heaving a ferrite-pearlite microstructure. For a given chemical composition, the mechanical characteristics of this microstructure are largely influenced by the grain size. Rolling is the deformation process which is most widely used for grain size refinement. Situated in the intermediate temperature range, warm-rolling presents certain advantages as compared to classical hot- or cold-working processes.The paper presents a study on the microstructure and mechanical properties of Ck15 carbon steel samples warm-rolled. After deformation, the microstructure was investigated by light microscopy. Hardness measurements were made on the section parallel to the rolling direction. The mechanical properties of the steel after warm-rolling were assessed by tensile and impact tests. Additional information concerning the fracture behavior of warm-rolled samples was obtained by examining the fracture surface by scanning electron microscopy. The microstructure of the steel proved to have good mechanical properties. By considering the technologic and energy aspects, the paper shows that warm-rolling can lead to the improvement of mechanical properties of construction carbon steels.

  10. Mechanical properties of metallic thin films: theoretical approach

    NASA Astrophysics Data System (ADS)

    Phuong, Duong Dai; Hoa, Nguyen Thi; Van Hung, Vu; Khoa, Doan Quoc; Hieu, Ho Khac

    2016-03-01

    The statistical moment method in statistical mechanics was developed to investigate the mechanical properties of free-standing metallic thin films at ambient conditions including the anharmonicity effects of thermal lattice vibrations. Analytical expressions of isothermal areal modulus B T , Young's modulus E and shear modulus G were derived in terms of the power moments of the atomic displacements. Numerical calculations have been performed for metallic Ni, Au and Al thin films, and compared with those of bulk metals. This method is physically transparent and it successfully described the temperature effects on mechanical properties of metallic thin films.

  11. Lithophysal Rock Mass Mechanical Properties of the Repository Host Horizon

    SciTech Connect

    D. Rigby

    2004-11-10

    The purpose of this calculation is to develop estimates of key mechanical properties for the lithophysal rock masses of the Topopah Spring Tuff (Tpt) within the repository host horizon, including their uncertainties and spatial variability. The mechanical properties to be characterized include an elastic parameter, Young's modulus, and a strength parameter, uniaxial compressive strength. Since lithophysal porosity is used as a surrogate property to develop the distributions of the mechanical properties, an estimate of the distribution of lithophysal porosity is also developed. The resulting characterizations of rock parameters are important for supporting the subsurface design, developing the preclosure safety analysis, and assessing the postclosure performance of the repository (e.g., drift degradation and modeling of rockfall impacts on engineered barrier system components).

  12. A simple auxetic tubular structure with tuneable mechanical properties

    NASA Astrophysics Data System (ADS)

    Ren, Xin; Shen, Jianhu; Ghaedizadeh, Arash; Tian, Hongqi; Xie, Yi Min

    2016-06-01

    Auxetic materials and structures are increasingly used in various fields because of their unusual properties. Auxetic tubular structures have been fabricated and studied due to their potential to be adopted as oesophageal stents where only tensile auxetic performance is required. However, studies on compressive mechanical properties of auxetic tubular structures are limited in the current literature. In this paper, we developed a simple tubular structure which exhibits auxetic behaviour in both compression and tension. This was achieved by extending a design concept recently proposed by the authors for generating 3D metallic auxetic metamaterials. Both compressive and tensile mechanical properties of the auxetic tubular structure were investigated. It was found that the methodology for generating 3D auxetic metamaterials could be effectively used to create auxetic tubular structures as well. By properly adjusting certain parameters, the mechanical properties of the designed auxetic tubular structure could be easily tuned.

  13. Mechanical properties of carbon nanotube/polymer composites.

    PubMed

    Arash, B; Wang, Q; Varadan, V K

    2014-01-01

    The remarkable mechanical properties of carbon nanotubes, such as high elastic modulus and tensile strength, make them the most ideal and promising reinforcements in substantially enhancing the mechanical properties of resulting polymer/carbon nanotube composites. It is acknowledged that the mechanical properties of the composites are significantly influenced by interfacial interactions between nanotubes and polymer matrices. The current challenge of the application of nanotubes in the composites is hence to determine the mechanical properties of the interfacial region, which is critical for improving and manufacturing the nanocomposites. In this work, a new method for evaluating the elastic properties of the interfacial region is developed by examining the fracture behavior of carbon nanotube reinforced poly (methyl methacrylate) (PMMA) matrix composites under tension using molecular dynamics simulations. The effects of the aspect ratio of carbon nanotube reinforcements on the elastic properties, i.e. Young's modulus and yield strength, of the interfacial region and the nanotube/polymer composites are investigated. The feasibility of a three-phase micromechanical model in predicting the elastic properties of the nanocomposites is also developed based on the understanding of the interfacial region. PMID:25270167

  14. Mechanical properties of carbon nanotube/polymer composites

    NASA Astrophysics Data System (ADS)

    Arash, B.; Wang, Q.; Varadan, V. K.

    2014-10-01

    The remarkable mechanical properties of carbon nanotubes, such as high elastic modulus and tensile strength, make them the most ideal and promising reinforcements in substantially enhancing the mechanical properties of resulting polymer/carbon nanotube composites. It is acknowledged that the mechanical properties of the composites are significantly influenced by interfacial interactions between nanotubes and polymer matrices. The current challenge of the application of nanotubes in the composites is hence to determine the mechanical properties of the interfacial region, which is critical for improving and manufacturing the nanocomposites. In this work, a new method for evaluating the elastic properties of the interfacial region is developed by examining the fracture behavior of carbon nanotube reinforced poly (methyl methacrylate) (PMMA) matrix composites under tension using molecular dynamics simulations. The effects of the aspect ratio of carbon nanotube reinforcements on the elastic properties, i.e. Young's modulus and yield strength, of the interfacial region and the nanotube/polymer composites are investigated. The feasibility of a three-phase micromechanical model in predicting the elastic properties of the nanocomposites is also developed based on the understanding of the interfacial region.

  15. Mechanical properties of carbon nanotube/polymer composites

    PubMed Central

    Arash, B.; Wang, Q.; Varadan, V. K.

    2014-01-01

    The remarkable mechanical properties of carbon nanotubes, such as high elastic modulus and tensile strength, make them the most ideal and promising reinforcements in substantially enhancing the mechanical properties of resulting polymer/carbon nanotube composites. It is acknowledged that the mechanical properties of the composites are significantly influenced by interfacial interactions between nanotubes and polymer matrices. The current challenge of the application of nanotubes in the composites is hence to determine the mechanical properties of the interfacial region, which is critical for improving and manufacturing the nanocomposites. In this work, a new method for evaluating the elastic properties of the interfacial region is developed by examining the fracture behavior of carbon nanotube reinforced poly (methyl methacrylate) (PMMA) matrix composites under tension using molecular dynamics simulations. The effects of the aspect ratio of carbon nanotube reinforcements on the elastic properties, i.e. Young's modulus and yield strength, of the interfacial region and the nanotube/polymer composites are investigated. The feasibility of a three-phase micromechanical model in predicting the elastic properties of the nanocomposites is also developed based on the understanding of the interfacial region. PMID:25270167

  16. Mechanical Properties Comparing Composite Fiber Length to Amalgam

    PubMed Central

    Petersen, Richard C.; Liu, Perng-Ru

    2016-01-01

    Photocure fiber-reinforced composites (FRCs) with varying chopped quartz-fiber lengths were incorporated into a dental photocure zirconia-silicate particulate-filled composite (PFC) for mechanical test comparisons with a popular commercial spherical-particle amalgam. FRC lengths included 0.5-mm, 1.0 mm, 2.0 mm, and 3.0 mm all at a constant 28.2 volume percent. Four-point fully articulated fixtures were used according to American Standards Test Methods with sample dimensions of 2×2×50 mm3 across a 40 mm span to provide sufficient Euler flexural bending and prevent top-load compressive shear error. Mechanical properties for flexural strength, modulus, yield strength, resilience, work of fracture, critical strain energy release, critical stress intensity factor, and strain were obtained for comparison. Fiber length subsequently correlated with increasing all mechanical properties, p < 1.1×10−5. Although the modulus was significantly statistically higher for amalgam than all composites, all FRCs and even the PFC had higher values than amalgam for all other mechanical properties. Because amalgams provide increased longevity during clinical use compared to the standard PFCs, modulus would appear to be a mechanical property that might sufficiently reduce margin interlaminar shear stress and strain-related microcracking that could reduce failure rates. Also, since FRCs were tested with all mechanical properties that statistically significantly increased over the PFC, new avenues for future development could be provided toward surpassing amalgam in clinical longevity.

  17. Mechanics of intraply hybrid composites - Properties, analysis and design

    NASA Technical Reports Server (NTRS)

    Chamis, C. C.; Sinclair, J. H.

    1979-01-01

    A mechanics theory is developed for predicting the physical thermal, hygral and mechanical properties (including various strengths) of unidirectional intraply hybrid composites (UIHC) based on unidirectional properties of the constituent composites. Procedures are described which can use this theory in conjunction with composite mechanics computer codes and general purpose structural analysis finite element programs for the analysis/design of structural components made from intraply hybrid angleplied laminates (IHAL). Comparisons with limited data show that this theory predicts mechanical properties of UIHC and flexural stiffnesses of IHAL which are in good agreement with experimental data. The theory developed herein makes it possible to design and optimize structural components from IHAL based on a large class of available constituent fibers.

  18. Metallic syntactic foams synthesis, characterization and mechanical properties

    NASA Astrophysics Data System (ADS)

    Castro, Gerhard

    In this study, we report two procedures for producing lab-scale syntactic steel by melt infiltration of millimeter-sized alumina microspheres: mechanical pressure infiltration and gravity-fed infiltration. Both methods yield foam with uniform distributions of microspheres and negligible unintended porosity. The most critical parameters in the manufacture of the syntactic steel foams are the melt temperature and the preheat temperature of the microspheres prior to infiltration. The preheatment temperature of the microspheres must be close to the melting temperature of steel. Syntactic steel foams with relative density of about half of solid steel densities were produced using monosized microspheres randomly situated in a mold. Microspheres with a diameter of 1.27 mm were used for the mechanical pressure infiltration method and microspheres with a diameter of 4.45 mm for the gravity-fed infiltration method. Different steel chemical compositions were selected to produce steel foams of different inherent yield strength: including several ferritic-pearlitic steels and one TRIP steel (TRansformation-Induced Plasticity). The resultant foams were characterized by chemical and microstructural analysis. The microstructure of the samples consisted of blends of ferritic and pearlitic constituents in varying proportions for the ferritic-pearlitic steels, while the cast TRIP steel matrix presented an austenitic microstructure. The basic mechanical properties of the steel syntactic foams were studied under compression loading. The pearlitic syntactic foams have greater compression strength and energy absorption capacity than the ferritic syntactic foams, but the TRIP steel syntactic foam exhibited the highest compression strength and highest energy absorption capacity. The properties of the steel syntactic foams were compared to those of other steel foams, aluminum foams and other cellular structures reported in the literature. We present also the compression and impact behavior

  19. Processing, texture and mechanical properties of sintered silicon carbide

    NASA Technical Reports Server (NTRS)

    Landfermann, H.; Hausner, H.

    1988-01-01

    With regard to its favorable properties, in particular those shown at high temperatures, silicon carbide is of great interest for applications related to the construction of engines and turbines. Thus, silicon carbide could replace heat-resisting alloys with the objective to achieve a further increase in operational temperature. The present investigation is concerned with approaches which can provide silicon carbide material with suitable properties for the intended applications, taking into account the relations between characteristics of the raw material, material composition, sinter conditions, and results of the sintering process. The effects of density and texture formation on the mechanical properties are studied. It is found that a dense material with a fine-grained microstructure provides optimal mechanical properties, while any deviation from this ideal condition can lead to a considerable deterioration with respect to the material properties.

  20. Mechanical properties of jennite: A theoretical and experimental study

    SciTech Connect

    Moon, Juhyuk; Yoon, Seyoon; Monteiro, Paulo J.M.

    2015-05-15

    The objective of this study is to determine the mechanical properties of jennite. To date, several hypotheses have been proposed to predict the structural properties of jennite. For the first time as reported herein, the isothermal bulk modulus of jennite was measured experimentally. Synchrotron-based high-pressure x-ray diffraction experiments were performed to observe the variation of lattice parameters under pressure. First-principles calculations were applied to compare with the experimental results and predict additional structural properties. Accurately measured isothermal bulk modulus herein (K{sub 0} = 64(2) GPa) and the statistical assessment on experimental and theoretical results suggest reliable mechanical properties of shear and Young's modulus, Poisson's ratio, and elastic tensor coefficients. Determination of these fundamental structural properties is the first step toward greater understanding of calcium–silicate–hydrate, as well as provides a sound foundation for forthcoming atomic level simulations.

  1. Mechanical property enhancement in laminates through control of morphology and crystal orientation

    NASA Astrophysics Data System (ADS)

    Zeilinger, A.; Daniel, R.; Stefenelli, M.; Sartory, B.; Chitu, L.; Burghammer, M.; Schöberl, T.; Kolednik, O.; Keckes, J.; Mitterer, C.

    2015-07-01

    This article shows the successful implementation of biological design principles into synthetic laminate materials in order to enhance their mechanical properties. We demonstrate and provide a strategy for laminate thin films, which reveals that the control of local crystal anisotropy across laminates together with the optimized layered arrangement are essential for their mechanical behavior. By the example of a laminate consisting of brittle CrN and ductile Cr layers, enhanced material properties are achieved by taking advantage of the self assembly mechanisms of the heterogeneous material during film growth. The usage of local microstructure analysis by a synchrotron based technique as well as miniature mechanical tests allow to understand the relationship between the apparent local microstructure and the accompanied mechanical properties. A crystallographic orientation relationship between Cr and CrN is elucidated, which leads to decisive mechanical enhancement due to microstructural benefits in terms of texture. This results in enhanced strength and fracture toughness of the laminate compared to its single constituents. The systematic approach gives an insight into the complex coherences of laminate materials, where the used techniques and design principles are universally applicable.

  2. Mechanical properties and in vitro degradation of bioresorbable knitted stents.

    PubMed

    Nuutinen, Juha-Pekka; Välimaa, Tero; Clerc, Claude; Törmälä, Pertti

    2002-01-01

    The aim of this study was to characterize the mechanical properties and in vitro degradation of bioresorbable knitted stents. Each stent was knitted using a single self-reinforced fibre made out of either PLLA or 96L/4D PLA or 80L/20G PLGA. The mechanical and physical properties of the fibres and stents were measured before and after gamma sterilization, as well as during in vitro degradation. The mechanical properties of the knitted stents made out of bioresorbable fibres were similar to those of commercially available metallic stents. The knitting geometry (loop height) had a marked effect on the mechanical properties of the stents. The rate of in vitro degradation in mechanical and physical properties for the PLLA and 96L/4D PLA stents was similar and significantly lower than that of the 80L/20G PLGA stents. The 80L/20G PLGA stents lost about 35% of their initial weight at 11 weeks. At this time, they had lost all their compression resistance strength. These data can be used as a guideline in planning further studies in vivo. PMID:12555898

  3. Deformation behavior and mechanical properties of amyloid protein nanowires.

    PubMed

    Solar, Max; Buehler, Markus J

    2013-03-01

    Amyloid fibrils are most often associated with their pathological role in diseases like Alzheimer's disease and Parkinson's disease, but they are now increasingly being considered for uses in functional engineering materials. They are among the stiffest protein fibers known but they are also rather brittle, and it is unclear how this combination of properties affects the behavior of amyloid structures at larger length scales, such as in films, wires or plaques. Using a coarse-grained model for amyloid fibrils, we study the mechanical response of amyloid nanowires and examine fundamental mechanical properties, including mechanisms of deformation and failure under tensile loading. We also explore the effect of varying the breaking strain and adhesion strength of the constituent amyloid fibrils on the properties of the larger structure. We find that deformation in the nanowires is controlled by a combination of fibril sliding and fibril failure and that there exists a transition from brittle to ductile behavior by either increasing the fibril failure strain or decreasing the strength of adhesion between fibrils. Furthermore, our results reveal that the mechanical properties of the nanowires are quite sensitive to changes in the properties of the individual fibrils, and the larger scale structures are found to be more mechanically robust than the constituent fibrils, for all cases considered. More broadly, this work demonstrates the promise of utilizing self-assembled biological building blocks in the development of hierarchical nanomaterials. PMID:23290516

  4. Measurements and Characterizations of Mechanical Properties of Human Skins

    NASA Astrophysics Data System (ADS)

    Song, Han Wook; Park, Yon Kyu

    A skin is an indispensible organ for humans because it contributes to metabolism using its own biochemical functions and protects the human body from external stimuli. Recently, mechanical properties such as a thickness, a friction and an elastic coefficient have been used as a decision index in the skin physiology and in the skin care market due to the increased awareness of wellbeing issues. In addition, the use of mechanical properties is known to have good discrimination ability in the classification of human constitutions, which are used in the field of an alternative medicine. In this study, a system that measures mechanical properties such as a friction and an elastic coefficient is designed. The equipment consists of a load cell type (manufactured by the authors) for the measurements of a friction coefficient, a decompression tube for the measurement of an elastic coefficient. Using the proposed system, the mechanical properties of human skins from different constitutions were compared, and the relative repeatability error for measurements of mechanical properties was determined to be less than 2%. Combining the inspection results of medical doctors in the field of an alternative medicine, we could conclude that the proposed system might be applicable to a quantitative constitutional diagnosis between human constitutions within an acceptable level of uncertainty.

  5. Metal Additive Manufacturing: A Review of Mechanical Properties

    NASA Astrophysics Data System (ADS)

    Lewandowski, John J.; Seifi, Mohsen

    2016-07-01

    This article reviews published data on the mechanical properties of additively manufactured metallic materials. The additive manufacturing techniques utilized to generate samples covered in this review include powder bed fusion (e.g., EBM, SLM, DMLS) and directed energy deposition (e.g., LENS, EBF3). Although only a limited number of metallic alloy systems are currently available for additive manufacturing (e.g., Ti-6Al-4V, TiAl, stainless steel, Inconel 625/718, and Al-Si-10Mg), the bulk of the published mechanical properties information has been generated on Ti-6Al-4V. However, summary tables for published mechanical properties and/or key figures are included for each of the alloys listed above, grouped by the additive technique used to generate the data. Published values for mechanical properties obtained from hardness, tension/compression, fracture toughness, fatigue crack growth, and high cycle fatigue are included for as-built, heat-treated, and/or HIP conditions, when available. The effects of test orientation/build direction on properties, when available, are also provided, along with discussion of the potential source(s) (e.g., texture, microstructure changes, defects) of anisotropy in properties. Recommendations for additional work are also provided.

  6. Particle morphology influence on mechanical and biocompatibility properties of injection molded Ti alloy powder.

    PubMed

    Gülsoy, H Özkan; Gülsoy, Nagihan; Calışıcı, Rahmi

    2014-01-01

    Titanium and Titanium alloys exhibits properties that are excellent for various bio-applications. Metal injection molding is a processing route that offers reduction in costs, with the added advantage of near net-shape components. Different physical properties of Titanium alloy powders, shaped and processed via injection molding can achieve high complexity of part geometry with mechanical and bioactivity properties, similar or superior to wrought material. This study describes that the effect of particle morphology on the microstructural, mechanical and biocompatibility properties of injection molded Ti-6Al-4V (Ti64) alloy powder for biomaterials applications. Ti64 powders irregular and spherical in shape were injection molded with wax based binder. Binder debinding was performed in solvent and thermal method. After debinding the samples were sintered under high vacuum. Metallographic studies were determined to densification and the corresponding microstructural changes. Sintered samples were immersed in a simulated body fluid (SBF) with elemental concentrations that were comparable to those of human blood plasma for a total period of 15 days. Both materials were implanted in fibroblast culture for biocompatibility evaluations were carried out. The results show that spherical and irregular powder could be sintered to a maximum theoretical density. Maximum tensile strength was obtained for spherical shape powder sintered. The tensile strength of the irregular shape powder sintered at the same temperature was lower due to higher porosity. Finally, mechanical tests show that the irregular shape powder has lower mechanical properties than spherical shape powder. The sintered irregular Ti64 powder exhibited better biocompatibility than sintered spherical Ti64 powder. Results of study showed that sintered spherical and irregular Ti64 powders exhibited high mechanical properties and good biocompatibility properties. PMID:25201399

  7. Microstructural influences on the mechanical properties of solder

    SciTech Connect

    Morris, J.W. Jr.; Goldstein, J.L.F.; Mei, Z.

    1993-04-01

    Intent of this book is to review analytic methods for predicting behavior of solder joints, based on continuum mechanics. The solder is treated as a continuous, homogeneous body, or composite of such bodies, whose mechanical behavior is uniform and governed by simple constitutive equations. The microstructure of a solder joint influences its mechanical properties in 3 ways: it governs deformation and failure; common solders deform inhomogeneously; and common solders are microstructurally unstable. The variety of microstructures often found in solder joints are briefly reviewed, and some of the ways are discussed in which the microstructure influences the common types of high-temperature mechanical behavior. 25 figs, 40 refs.

  8. On why left events are the right ones: neural mechanisms underlying the left-hemifield advantage in rapid serial visual presentation.

    PubMed

    Verleger, Rolf; Sprenger, Andreas; Gebauer, Sina; Fritzmannova, Michaela; Friedrich, Monique; Kraft, Stefanie; Jaśkowski, Piotr

    2009-03-01

    When simultaneous series of stimuli are rapidly presented left and right, containing two target stimuli T1 and T2, T2 is much better identified when presented in the left than in the right hemifield. Here, this effect was replicated, even when shifts of gaze were controlled, and was only partially compensated when T1 side provided the cue where to expect T2. Electrophysiological measurement revealed earlier latencies of T1- and T2-evoked N2(pc) peaks at the right than at the left visual cortex, and larger right-hemisphere T2-evoked N2(pc) amplitudes when T2 closely followed T1. These findings suggest that the right hemisphere was better able to single out the targets in time. Further, sustained contralateral slow shifts remained active after T1 for longer time at the right than at the left visual cortex, and developed more consistently at the right visual cortex when expecting T2 on the contralateral side. These findings might reflect better capacity of right-hemisphere visual working memory. These findings about the neurophysiological underpinnings of the large right-hemisphere advantage in this complex visual task might help elucidating the mechanisms responsible for the severe disturbance of hemineglect following damage to the right hemisphere. PMID:18564053

  9. Electrospun PCL/Gelatin composite fibrous scaffolds: mechanical properties and cellular responses.

    PubMed

    Yao, Ruijuan; He, Jing; Meng, Guolong; Jiang, Bo; Wu, Fang

    2016-06-01

    Electrospinning of hybrid polymer has gained widespread interest by taking advantages of the biological property of the natural polymer and the mechanical property of the synthetic polymer. However, the effect of the blend ratio on the above two properties has been less reported despite the importance to balance these two properties in various tissue engineering applications. To this aim, we investigated the electrospun PCL/Gelatin composite fibrous scaffolds with different blend ratios of 4:1, 2:1, 1:1, 1:2, 1:4, respectively. The morphology of the electrospun samples was observed by SEM and the result showed that the fiber diameter distribution became more uniform with the increase of the gelatin content. The mechanical testing results indicated that the 2:1 PCL/Gelatin sample had both the highest tensile strength of 3.7 MPa and the highest elongation rate of about 90%. Surprisingly, the 2:1 PCL/Gelatin sample also showed the best mesenchymal stem cell responses in terms of attachment, spreading, and cytoskeleton organization. Such correlation might be partly due to the fact that the enhanced mechanical property, an integral part of the physical microenvironment, likely played an important role in regulating the cellular functions. Overall, our results indicated that the PCL/Gelatin sample with the blend ratio of 2:1 was a superior candidate for scaffolds for tissue engineering applications. PMID:27044505

  10. Molecular tandem repeat strategy for elucidating mechanical properties of high-strength proteins.

    PubMed

    Jung, Huihun; Pena-Francesch, Abdon; Saadat, Alham; Sebastian, Aswathy; Kim, Dong Hwan; Hamilton, Reginald F; Albert, Istvan; Allen, Benjamin D; Demirel, Melik C

    2016-06-01

    Many globular and structural proteins have repetitions in their sequences or structures. However, a clear relationship between these repeats and their contribution to the mechanical properties remains elusive. We propose a new approach for the design and production of synthetic polypeptides that comprise one or more tandem copies of a single unit with distinct amorphous and ordered regions. Our designed sequences are based on a structural protein produced in squid suction cups that has a segmented copolymer structure with amorphous and crystalline domains. We produced segmented polypeptides with varying repeat number, while keeping the lengths and compositions of the amorphous and crystalline regions fixed. We showed that mechanical properties of these synthetic proteins could be tuned by modulating their molecular weights. Specifically, the toughness and extensibility of synthetic polypeptides increase as a function of the number of tandem repeats. This result suggests that the repetitions in native squid proteins could have a genetic advantage for increased toughness and flexibility. PMID:27222581

  11. Build-in Electric Field Induced Mechanical Property Change

    NASA Astrophysics Data System (ADS)

    Chien, Te-Yu; Liu, Jian; Yost, Andrew J.; Chakhalian, Jacques; Freeland, John W.; Guisinger, Nathan P.

    Mechanical properties describe how materials respond to external stress. Microscopically, many intrinsic and extrinsic factors, such as bond length and strength (intrinsic) and grain boundaries (extrinsic), may affect the mechanical property of the materials. In this study, we observed a change of fracturing behavior of Nb-doped SrTiO3 in a Schottky barrier near the interfaces with metallic LaNiO3 films. Through cross-sectional scanning tunneling microscopy and spectroscopy (XSTM/S) experiments and theoretical analysis, the observed fractured topography could be explained by the change of the bond length caused alternation of mechanical property inside the Schottky barrier. Same model could also explain the widely observed dielectric dead layer for SrTiO3 in contact with metal electrodes.

  12. Method of predicting mechanical properties of decayed wood

    DOEpatents

    Kelley, Stephen S.

    2003-07-15

    A method for determining the mechanical properties of decayed wood that has been exposed to wood decay microorganisms, comprising: a) illuminating a surface of decayed wood that has been exposed to wood decay microorganisms with wavelengths from visible and near infrared (VIS-NIR) spectra; b) analyzing the surface of the decayed wood using a spectrometric method, the method generating a first spectral data of wavelengths in VIS-NIR spectra region; and c) using a multivariate analysis to predict mechanical properties of decayed wood by comparing the first spectral data with a calibration model, the calibration model comprising a second spectrometric method of spectral data of wavelengths in VIS-NIR spectra obtained from a reference decay wood, the second spectral data being correlated with a known mechanical property analytical result obtained from the reference decayed wood.

  13. Punching Deterioration Mechanism of Magnetic Properties of Cores

    NASA Astrophysics Data System (ADS)

    Kaido, Chikara; Mogi, Hisashi; Fujikura, Masahiro; Yamasaki, Jiro

    This paper discusses the deterioration mechanism of magnetic properties of cores due to punching and proposes the modeling, as the best design of motors, considering manufacturing motors, is important in order to improve the high performance of motors corresponding to energy saving. In producing motors, magnetic cores with laminated steel sheets are made of punched sheets, and then the magnetic properties of steel sheets are deteriorated by plastic deformation and the induced residual stress due to punching. In this paper, the punching deterioration mechanism is investigated by observing magnetic domains at steel surfaces near sheared parts. Tensile and compressive stresses induced at cut steel edges deteriorate the magnetic properties of punched steel sheets in high flux densities as the compression deterioration is stronger than the tension improvement, and improve permeabilities at low magnetic field because the increases in permeabilities with tensile stresses are emphasized. Therefore, it is necessary to model the magnetic properties of motor magnetic cores, taking account of these magnetic phenomena.

  14. Electronic and Mechanical Properties of Hydrogen Functionalized Carbon Nanotubes

    NASA Technical Reports Server (NTRS)

    Yang, Liu; Han, Jie; Jaffe, Richard L.; Arnold, Jim (Technical Monitor)

    2001-01-01

    We examined the electronic and mechanical properties of hydrogen functionalized carbon nanotubes. The functionalization pattern covers two extreme groups. One group has randomly selected functionalization sites including one to twenty percent of the carbon atoms. The other group has regularly patterned functional sites parallel to the tube axis. Metallic, small-gap semiconducting and large-gap semiconducting carbon nanotubes are studied. The results reveal that the electronic properties of the tubes are very sensitive to the degree of functionalization, with even one percent functionalization being enough to render metallic tubes semiconducting. On the other hand, the mechanical properties, like tensile modulus, are much less sensitive to functionalization. For carbon nanotubes functionalized with specific patterns, the electric properties depends strongly on the nature of the functionalization pattern.

  15. Nanofiller reinforcement versus surface treatment effect on the mechanical properties of syntactic foams

    NASA Astrophysics Data System (ADS)

    Zhang, Liying; Chen, Ye; Hu, Xiao; Liu, Ming

    2015-03-01

    Syntactic foams are one of the special kinds of composite materials which can be prepared in a mechanical way by mixing hollow particles (the filler) with a resin system (the binder). To improve the mechanical properties of syntactic foams, in our work, carbon nanofibers (CNFs) were added to reinforce the syntactic foam. Results showed that although the presence of carbon nanofiber improved the mechanical properties of the syntactic foam, it dramatically increased the density, i.e., destroyed the main advantage of syntactic foams. In addition, the introduction of CNFs could cause difficulty in fabrication and increase the production cost. In order to overcome these problems, two approaches of the surface treatment of hollow microspheres, namely coupling agent and polydopamine (PDA) coating, were applied. Results showed that better interfacial adhesion between hollow microspheres and matrix could be induced from both coupling agent and PDA treated hollow microspheres, which led to the enhancement in mechanical properties of the syntactic foam while maintaining their low density. Compared with the coupling agent approach, the facile one-step PDA coating was much more effective. The failure mechanisms of the CNFs reinforced syntactic foam (CNFRSF) and the syntactic foam containing treated hollow microspheres were discussed in detail.

  16. Microstructures and Mechanical Properties of Irradiated Metals and Alloys

    SciTech Connect

    Zinkle, Steven J

    2008-01-01

    The effects of neutron irradiation on the microstructural evolution of metals and alloys are reviewed, with an emphasis on the roles of crystal structure, neutron dose and temperature. The corresponding effects of neutron irradiation on mechanical properties of metals and alloys are summarized, with particular attention on the phenomena of low temperature radiation hardening and embrittlement. The prospects of developing improved high-performance structural materials with high resistance to radiation-induced property degradation are briefly discussed.

  17. Mechanical models of the cellular cytoskeletal network for the analysis of intracellular mechanical properties and force distributions: a review.

    PubMed

    Chen, Ting-Jung; Wu, Chia-Ching; Su, Fong-Chin

    2012-12-01

    The cytoskeleton, which is the major mechanical component of cells, supports the cell body and regulates the cellular motility to assist the cell in performing its biological functions. Several cytoskeletal network models have been proposed to investigate the mechanical properties of cells. This review paper summarizes these models with a focus on the prestressed cable network, the semi-flexible chain network, the open-cell foam, the tensegrity, and the granular models. The components, material parameters, types of connection joints, tension conditions, and the advantages and disadvantages of each model are evaluated from a structural and biological point of view. The underlying mechanisms that are associated with the morphological changes of spreading cells are expected to be simulated using a cytoskeletal model; however, it is still paid less attention most likely due to the lack of a suitable cytoskeletal model that can accurately model the spreading process. In this review article, the established cytoskeletal models are hoped to provide useful information for the development of future cytoskeletal models with different degrees of cell attachment for the study of the mechanical mechanisms underlying the cellular behaviors in response to external stimulations. PMID:23062682

  18. Mechanical property quantification of endothelial cells using scanning acoustic microscopy

    NASA Astrophysics Data System (ADS)

    Shelke, A.; Brand, S.; Kundu, T.; Bereiter-Hahn, J.; Blase, C.

    2012-04-01

    The mechanical properties of cells reflect dynamic changes of cellular organization which occur during physiologic activities like cell movement, cell volume regulation or cell division. Thus the study of cell mechanical properties can yield important information for understanding these physiologic activities. Endothelial cells form the thin inner lining of blood vessels in the cardiovascular system and are thus exposed to shear stress as well as tensile stress caused by the pulsatile blood flow. Endothelial dysfunction might occur due to reduced resistance to mechanical stress and is an initial step in the development of cardiovascular disease like, e.g., atherosclerosis. Therefore we investigated the mechanical properties of primary human endothelial cells (HUVEC) of different age using scanning acoustic microscopy at 1.2 GHz. The HUVECs are classified as young (tD < 90 h) and old (tD > 90 h) cells depending upon the generation time for the population doubling of the culture (tD). Longitudinal sound velocity and geometrical properties of cells (thickness) were determined using the material signature curve V(z) method for variable culture condition along spatial coordinates. The plane wave technique with normal incidence is assumed to solve two-dimensional wave equation. The size of the cells is modeled using multilayered (solid-fluid) system. The propagation of transversal wave and surface acoustic wave are neglected in soft matter analysis. The biomechanical properties of HUVEC cells are quantified in an age dependent manner.

  19. Investigation of mechanical properties of cryogenically treated music wire.

    PubMed

    Heptonstall, A; Waller, M; Robertson, N A

    2015-08-01

    It has been reported that treating music wire (high carbon steel wire) by cooling to cryogenic temperatures can enhance its mechanical properties with particular reference to those properties important for musical performance. We use such wire for suspending many of the optics in Advanced LIGO, the upgrade to LIGO—the Laser Interferometric Gravitational-Wave Observatory. Two properties that particularly interest us are mechanical loss and breaking strength. A decrease in mechanical loss would directly reduce the thermal noise associated with the suspension, thus enhancing the noise performance of mirror suspensions within the detector. An increase in strength could allow thinner wire to be safely used, which would enhance the dilution factor of the suspension, again leading to lower suspension thermal noise. In this article, we describe the results of an investigation into some of the mechanical properties of music wire, comparing untreated wire with the same wire which has been cryogenically treated. For the samples we studied, we conclude that there is no significant difference in the properties of interest for application in gravitational wave detectors. PMID:26329213

  20. Effects of humidity on the mechanical properties of gecko setae.

    PubMed

    Prowse, Michael S; Wilkinson, Matt; Puthoff, Jonathan B; Mayer, George; Autumn, Kellar

    2011-02-01

    We tested the hypothesis that an increase in relative humidity (RH) causes changes in the mechanical properties of the keratin of adhesive gecko foot hairs (setae). We measured the effect of RH on the tensile deformation properties, fracture, and dynamic mechanical response of single isolated tokay gecko setae and strips of the smooth lamellar epidermal layer. The mechanical properties of gecko setae were strongly affected by RH. The complex elastic modulus (measured at 5 Hz) of a single seta at 80% RH was 1.2 GPa, only 39% of the value when dry. An increase in RH reduced the stiffness and increased the strain to failure. The loss tangent increased significantly with humidity, suggesting that water absorption produces a transition to a more viscous type of deformation. The influence of RH on the properties of the smooth epidermal layer was comparable with that of isolated seta, with the exception of stress at rupture. These values were two to four times greater for the setae than for the smooth layer. The changes in mechanical properties of setal keratin were consistent with previously reported increases in contact forces, supporting the hypothesis that an increase in RH softens setal keratin, which increases adhesion and friction. PMID:20920615

  1. Transient dynamic mechanical properties of resilin-based elastomeric hydrogels

    PubMed Central

    Li, Linqing; Kiick, Kristi L.

    2014-01-01

    The outstanding high-frequency properties of emerging resilin-like polypeptides (RLPs) have motivated their development for vocal fold tissue regeneration and other applications. Recombinant RLP hydrogels show efficient gelation, tunable mechanical properties, and display excellent extensibility, but little has been reported about their transient mechanical properties. In this manuscript, we describe the transient mechanical behavior of new RLP hydrogels investigated via both sinusoidal oscillatory shear deformation and uniaxial tensile testing. Oscillatory stress relaxation and creep experiments confirm that RLP-based hydrogels display significantly reduced stress relaxation and improved strain recovery compared to PEG-based control hydrogels. Uniaxial tensile testing confirms the negligible hysteresis, reversible elasticity and superior resilience (up to 98%) of hydrated RLP hydrogels, with Young's modulus values that compare favorably with those previously reported for resilin and that mimic the tensile properties of the vocal fold ligament at low strain (<15%). These studies expand our understanding of the properties of these RLP materials under a variety of conditions, and confirm the unique applicability, for mechanically demanding tissue engineering applications, of a range of RLP hydrogels. PMID:24809044

  2. Mechanical properties of the brain-skull interface.

    PubMed

    Mazumder, Mohammad Mynuddin Gani; Miller, Karol; Bunt, Stuart; Mostayed, Ahmed; Joldes, Grand; Day, Robert; Hart, Robin; Wittek, Adam

    2013-01-01

    Knowledge of the mechanical properties of the brain-skull interface is important for surgery simulation and injury biomechanics. These properties are known only to a limited extent. In this study we conducted in situ indentation of the sheep brain, and proposed to derive the macroscopic mechanical properties of the brain-skull interface from the results of these experiments. To the best of our knowledge, this is the first ever analysis of this kind. When conducting in situ indentation of the brain, the reaction force on the indentor was measured. After the indentation, a cylindrical sample of the brain tissue was extracted and subjected to uniaxial compression test. A model of the brain indentation experiment was built in the Finite Element (FE) solver ABAQUS™. In the model, the mechanical properties of the brain tissue were assigned as obtained from the uniaxial compression test and the brain-skull interface was modeled as linear springs. The interface stiffness (defined as sum of stiffnesses of the springs divided by the interface area) was varied to obtain good agreement between the calculated and experimentally measured indentor force-displacement relationship. Such agreement was found to occur for the brain-skull interface stiffness of 11.45 Nmm⁻¹/mm². This allowed identification of the overall mechanical properties of the brain-skull interface. PMID:23951996

  3. The effect of composition on mechanical properties of brushite cements.

    PubMed

    Engstrand, Johanna; Persson, Cecilia; Engqvist, Håkan

    2014-01-01

    Due to a fast setting reaction, good biological properties, and easily available starting materials, there has been extensive research within the field of brushite cements as bone replacing material. However, the fast setting of brushite cement gives them intrinsically low mechanical properties due to the poor crystal compaction during setting. To improve this, many additives such as citric acid, pyrophosphates, and glycolic acid have been added to the cement paste to retard the crystal growth. Furthermore, the incorporation of a filler material could improve the mechanical properties when used in the correct amounts. In this study, the effect of the addition of the two retardants, disodium dihydrogen pyrophosphate and citric acid, together with the addition of β-TCP filler particles, on the mechanical properties of a brushite cement was investigated. The results showed that the addition of low amounts of a filler (up to 10%) can have large effects on the mechanical properties. Furthermore, the addition of citric acid to the liquid phase makes it possible to use lower liquid-to-powder ratios (L/P), which strongly affects the strength of the cements. The maximal compressive strength (41.8MPa) was found for a composition with a molar ratio of 45:55 between monocalcium phosphate monohydrate and beta-tricalcium phosphate, an L/P of 0.25ml/g and a citric acid concentration of 0.5M in the liquid phase. PMID:24064324

  4. Investigation of mechanical properties of cryogenically treated music wire

    NASA Astrophysics Data System (ADS)

    Heptonstall, A.; Waller, M.; Robertson, N. A.

    2015-08-01

    It has been reported that treating music wire (high carbon steel wire) by cooling to cryogenic temperatures can enhance its mechanical properties with particular reference to those properties important for musical performance. We use such wire for suspending many of the optics in Advanced LIGO, the upgrade to LIGO—the Laser Interferometric Gravitational-Wave Observatory. Two properties that particularly interest us are mechanical loss and breaking strength. A decrease in mechanical loss would directly reduce the thermal noise associated with the suspension, thus enhancing the noise performance of mirror suspensions within the detector. An increase in strength could allow thinner wire to be safely used, which would enhance the dilution factor of the suspension, again leading to lower suspension thermal noise. In this article, we describe the results of an investigation into some of the mechanical properties of music wire, comparing untreated wire with the same wire which has been cryogenically treated. For the samples we studied, we conclude that there is no significant difference in the properties of interest for application in gravitational wave detectors.

  5. Rock Mechanical Properties from Logs Petrophysics : Concepts and Results

    NASA Astrophysics Data System (ADS)

    Gaillot, Philippe; Crawford, Brian; Alramahi, Bashar; Karner, Steve

    2010-05-01

    The objective of the "geomechanics from logs" (GML) research project is to develop model-driven predictive software for determining rock mechanical properties (specifically rock strength, compressibility and fracability) from other, more easily measured, rock properties (e.g. lithology, porosity, clay volume, velocity) routinely derived from nuclear, resistivity and acoustic logging tools. To this end, geomechanics from logs seeks to increase fundamental understanding of the primary geologic controls on rock mechanical properties and to translate this new insight into novel predictive tools. In detail, GML predictors rely on (i) the generation of relational rock mechanical properties databases incorporating QC'd core-based laboratory measurements (both in-house and high-precision published data); (ii) the use of established rock physics models (e.g. friable sand, contact cement models) to investigate theoretical relationships between geologic processes, reservoir environment, rock microstructure and elastic, bulk and transport petrophysical attributes/properties; (iii) the subdivision of database rocks into generic lithotypes (e.g. sand, shaly sand, sandy shale, shale) with common petrophysical attributes/properties; (iv) the use of multivariate statistics to generate lithotype-dependent empirical predictive relationships between mechanical properties and log-derived petrophysical attributes/properties; (v) the estimation of uncertainties associated with predictive function parameters; (vi) the application and validation of mechanical properties predictive tools to well-documented case studies (e.g. sand strength for perforation stability, rock compressibility for reservoir simulation) to test overall performance and quantify uncertainty in predictions. This paper presents the results of various rock strength, rock compressibility and rock fracability case studies conducted in wells of different stratigraphic age and depositional environment. Overall, GML (i

  6. Hygrothermal ageing effect on mechanical properties of FRP laminates

    NASA Astrophysics Data System (ADS)

    Larbi, S.; Bensaada, R.; Bilek, A.; Djebali, S.

    2015-03-01

    The aim of this work is to study the effect of hygrothermal aging on mechanical properties of two composite materials (carbon fiber / epoxy and glass fiber E / vinylester). Two stratifications are studied for each material. Both materials are exposed to two different environments, the sea water and the deionized water at a temperature of 40°C. The kinetic of material absorption is plotted. We see an irreversible degradation of material caused by exposure time. The characterization of samples in the virgin state and the aged condition is achieved with three points bending tests. We can see significant loss of mechanical properties due to hygrothermal aging.

  7. Thermal Influence on Mechanical Properties of Granite: A Microcracking Perspective

    NASA Astrophysics Data System (ADS)

    Zhao, Zhihong

    2016-03-01

    The particle mechanics method is used to simulate the process of thermally induced micro- and macrocracks in granite, to elucidate the mechanisms responsible for temperature-dependent mechanical properties. The numerical results are quantified and compared with existing results from other experimental data in the literature. The results indicate that heating generally reduces the compressive and tensile strengths of granites, first because of increasing thermal stresses, and second because of the generation of tensile microcracks. Rock mechanical properties are reduced in specimens subjected to heating-cooling cycles, solely because of the increase in density of thermally induced tensile microcracks. The presence of a thermal gradient induces the formation of macrocracks, which propagate from relatively cool to relatively warm areas. It is also observed that the boundary condition of the specimen can also affect the development of microcracks.

  8. Titanium/beryllium laminates - Fabrication, mechanical properties, and potential aerospace applications

    NASA Technical Reports Server (NTRS)

    Chamis, C. C.; Lark, R. F.

    1978-01-01

    The paper describes an investigation to assess the fabricability, mechanical properties, and possible aerospace applications of adhesively-bonded titanium/beryllium Tiber laminates. The results of the investigation indicate that structural laminates can be made which have: a modulus of elasticity comparable to steel, fracture strength comparable to the yield strength of titanium, density comparable to aluminum, impact resistance comparable to titanium, and little or no notch sensitivity. These laminates can have stiffness and weight advantages over other materials, including advanced fiber composites, in some aerospace applications where buckling resistance, vibration frequencies, and weight considerations control the design.

  9. Mechanical properties of normal versus cancerous breast cells.

    PubMed

    Smelser, Amanda M; Macosko, Jed C; O'Dell, Adam P; Smyre, Scott; Bonin, Keith; Holzwarth, George

    2015-11-01

    A cell's mechanical properties are important in determining its adhesion, migration, and response to the mechanical properties of its microenvironment and may help explain behavioral differences between normal and cancerous cells. Using fluorescently labeled peroxisomes as microrheological probes, the interior mechanical properties of normal breast cells were compared to a metastatic breast cell line, MDA-MB-231. To estimate the mechanical properties of cell cytoplasms from the motions of their peroxisomes, it was necessary to reduce the contribution of active cytoskeletal motions to peroxisome motion. This was done by treating the cells with blebbistatin, to inhibit myosin II, or with sodium azide and 2-deoxy-D-glucose, to reduce intracellular ATP. Using either treatment, the peroxisomes exhibited normal diffusion or subdiffusion, and their mean squared displacements (MSDs) showed that the MDA-MB-231 cells were significantly softer than normal cells. For these two cell types, peroxisome MSDs in treated and untreated cells converged at high frequencies, indicating that cytoskeletal structure was not altered by the drug treatment. The MSDs from ATP-depleted cells were analyzed by the generalized Stokes-Einstein relation to estimate the interior viscoelastic modulus G* and its components, the elastic shear modulus G' and viscous shear modulus G", at angular frequencies between 0.126 and 628 rad/s. These moduli are the material coefficients that enter into stress-strain relations and relaxation times in quantitative mechanical models such as the poroelastic model of the interior regions of cancerous and non-cancerous cells. PMID:25929519

  10. Hierarchical structure and mechanical properties of remineralized dentin.

    PubMed

    Chen, Yi; Wang, Jianming; Sun, Jian; Mao, Caiyun; Wang, Wei; Pan, Haihua; Tang, Ruikang; Gu, Xinhua

    2014-12-01

    It is widely accepted that the mechanical properties of dentin are significantly determined by its hierarchical structure. The current correlation between the mechanical properties and the hierarchical structure was mainly established by studying altered forms of dentin, which limits the potential outcome of the research. In this study, dentins with three different hierarchical structures were obtained via two different remineralization procedures and at different remineralization stages: (1) a dentin structure with amorphous minerals incorporated into the collagen fibrils, (2) a dentin with crystallized nanominerals incorporated into the collagen fibrils, and (3) a dentin with an out-of-order mineral layer filling the collagen fibrils matrix. Nanoindentation tests were performed to investigate the mechanical behavior of the remineralized dentin slides. The results showed that the incorporation of the crystallized nanominerals into the acid-etched demineralized organic fibrils resulted in a remarkable improvement of the mechanical properties of the dentin. In contrast, for the other two structures, i.e. the amorphous minerals inside the collagen fibrils and the out-of-order mineral layer within the collagen fibrils matrix, the excellent mechanical properties of dentin could not be restored. PMID:25259668

  11. Mechanical and tribological properties of ion beam-processed surfaces

    NASA Astrophysics Data System (ADS)

    Kodali, Padma

    A variety of surface modification and surface coating techniques are currently used in industry to modify the near-surface mechanical properties that influence the friction and wear behavior of metals, metallic alloys, ceramics, and polymers. Near-surface mechanical properties such as hardness and fracture toughness of a coating-substrate system can be tailored economically without changing the bulk properties of the system. The intent of this work was to broaden the applications of well-established surface modification techniques and to elucidate the various wear mechanisms that occur in sliding contact of ion-beam processed surfaces. The investigation included characterization and evaluation of coatings and modified surfaces synthesized by three surface engineering methods; namely, beam-line ion implantation, plasma-source ion implantation, and DC magnetron sputtering. Correlation among measured properties such as surface hardness, fracture toughness, and wear behavior was also examined. This dissertation focused on the following areas of research: (1) Investigating the mechanical and tribological properties of mixed implantation of carbon and nitrogen into single crystal silicon by beam-line implantation. (2) Characterizing the mechanical and tribological properties of diamond-like carbon (DLC) coatings processed by plasma source ion implantation. (3) Developing and evaluating metastable boron-carbon-nitrogen (BCN) compound coatings for mechanical and tribological properties. The surface hardness of a mixed carbon-nitrogen implant sample improved significantly compared to the unimplanted sample. However, the enhancement in the wear factor of this sample was found to be less significant than carbon-implanted samples. The presence of nitrogen might be responsible for the degraded wear behavior since nitrogen-implantation alone resulted in no improvement in the wear factor. Wear mechanisms that occurred in implanted and unimplanted surfaces tested against AIS152100

  12. Mechanical properties of the rabbit iris smooth muscles.

    PubMed

    Yamaji, Kazutsuna; Yoshitomi, Takeshi; Usui, Shiro; Ohnishi, Yoshitaka

    2003-02-01

    The study focuses on obtaining the visco-elastic properties of the iris sphincter and dilator muscles. Two kinds of experiments were performed: the isometric contraction experiment and the isotonic quick release experiment. The length-tension relationship was obtained from the former experiment. This relationship clarified the contribution of each muscle in determining the statics of the pupil. The viscous and serial elastic properties were obtained from the latter experiment. The viscosity could be expressed by the expanded Hill's equation as a function of velocity and contractile tension. We argue that serial elasticity is independent of contractile tension. These properties provide insights into the pupillary mechanism. PMID:12536003

  13. Investigation of the mechanical properties of superconducting coils

    SciTech Connect

    Markely, F.W.; Kerby, J.S.

    1990-03-01

    This paper presents data on 3 of the important mechanical properties of SSC type superconducting coils. The measured properties are: (1) The azimuthal elastic modulus of the coil samples made for the stress relaxation tests. (2) The rate of stress --- relaxation of collared SSC outer coils molded to different sizes and (3) The pressures that various insulations can withstand during molding or collaring before turn-to-turn shorts develop. Additional data on these and other properties are available but omitted here because of space limitations. 3 refs., 10 figs.

  14. Designed biomaterials to mimic the mechanical properties of muscles.

    PubMed

    Lv, Shanshan; Dudek, Daniel M; Cao, Yi; Balamurali, M M; Gosline, John; Li, Hongbin

    2010-05-01

    The passive elasticity of muscle is largely governed by the I-band part of the giant muscle protein titin, a complex molecular spring composed of a series of individually folded immunoglobulin-like domains as well as largely unstructured unique sequences. These mechanical elements have distinct mechanical properties, and when combined, they provide the desired passive elastic properties of muscle, which are a unique combination of strength, extensibility and resilience. Single-molecule atomic force microscopy (AFM) studies demonstrated that the macroscopic behaviour of titin in intact myofibrils can be reconstituted by combining the mechanical properties of these mechanical elements measured at the single-molecule level. Here we report artificial elastomeric proteins that mimic the molecular architecture of titin through the combination of well-characterized protein domains GB1 and resilin. We show that these artificial elastomeric proteins can be photochemically crosslinked and cast into solid biomaterials. These biomaterials behave as rubber-like materials showing high resilience at low strain and as shock-absorber-like materials at high strain by effectively dissipating energy. These properties are comparable to the passive elastic properties of muscles within the physiological range of sarcomere length and so these materials represent a new muscle-mimetic biomaterial. The mechanical properties of these biomaterials can be fine-tuned by adjusting the composition of the elastomeric proteins, providing the opportunity to develop biomaterials that are mimetic of different types of muscles. We anticipate that these biomaterials will find applications in tissue engineering as scaffold and matrix for artificial muscles. PMID:20445626

  15. Characterization of mechanical and biochemical properties of developing embryonic tendon

    PubMed Central

    Marturano, Joseph E.; Arena, Jeffrey D.; Schiller, Zachary A.; Georgakoudi, Irene; Kuo, Catherine K.

    2013-01-01

    Tendons have uniquely high tensile strength, critical to their function to transfer force from muscle to bone. When injured, their innate healing response results in aberrant matrix organization and functional properties. Efforts to regenerate tendon are challenged by limited understanding of its normal development. Consequently, there are few known markers to assess tendon formation and parameters to design tissue engineering scaffolds. We profiled mechanical and biological properties of embryonic tendon and demonstrated functional properties of developing tendon are not wholly reflected by protein expression and tissue morphology. Using force volume-atomic force microscopy, we found that nano- and microscale tendon elastic moduli increase nonlinearly and become increasingly spatially heterogeneous during embryonic development. When we analyzed potential biochemical contributors to modulus, we found statistically significant but weak correlation between elastic modulus and collagen content, and no correlation with DNA or glycosaminoglycan content, indicating there are additional contributors to mechanical properties. To investigate collagen cross-linking as a potential contributor, we inhibited lysyl oxidase-mediated collagen cross-linking, which significantly reduced tendon elastic modulus without affecting collagen morphology or DNA, glycosaminoglycan, and collagen content. This suggests that lysyl oxidase-mediated cross-linking plays a significant role in the development of embryonic tendon functional properties and demonstrates that changes in cross-links alter mechanical properties without affecting matrix content and organization. Taken together, these data demonstrate the importance of functional markers to assess tendon development and provide a profile of tenogenic mechanical properties that may be implemented in tissue engineering scaffold design to mechanoregulate new tendon regeneration. PMID:23576745

  16. Exploration of mechanisms underlying the strain-rate-dependent mechanical property of single chondrocytes

    SciTech Connect

    Nguyen, Trung Dung; Gu, YuanTong

    2014-05-05

    Based on the characterization by Atomic Force Microscopy, we report that the mechanical property of single chondrocytes has dependency on the strain-rates. By comparing the mechanical deformation responses and the Young's moduli of living and fixed chondrocytes at four different strain-rates, we explore the deformation mechanisms underlying this dependency property. We found that the strain-rate-dependent mechanical property of living cells is governed by both of the cellular cytoskeleton and the intracellular fluid when the fixed chondrocytes are mainly governed by their intracellular fluid, which is called the consolidation-dependent deformation behavior. Finally, we report that the porohyperelastic constitutive material model which can capture the consolidation-dependent behavior of both living and fixed chondrocytes is a potential candidature to study living cell biomechanics.

  17. Mechanical Behavior of Agave Americana L. Fibres: Correlation Between Fine Structure and Mechanical Properties

    NASA Astrophysics Data System (ADS)

    Msahli, S.; Chaabouni, Y.; Sakli, F.; Drean, J. Y.

    In this study, results of a mechanical behavior study of fibres extracted from the agave Americana L. plant, the most abundant variety in Tunisia, are presented. These results deal with the principal and mechanical characteristics of these fibres which are the elongation at break, the elasticity modulus and the rupture facture. These results permitted to situate these fibres, compared to the other textile fibres, as materials that can be used in technical applications such as reinforcing composites or geotextile. In order to understand the mechanical properties of these fibres, a correlation study between the properties already cited and the fine structure was done. The obtained results showed that the mechanical properties of agave Americana L. fibres are closely related to the individual fibers deformations and to the natural matrix (lignin and gums) that links these elementary fibres.

  18. High-rate mechanical properties of energetic materials

    NASA Astrophysics Data System (ADS)

    Walley, S. M.; Siviour, C. R.; Drodge, D. R.; Williamson, D. M.

    2010-01-01

    Compared to the many thousands of studies that have been performed on the energy release mechanisms of high energy materials, relatively few studies have been performed (a few hundred) into their mechanical properties. Since it is increasingly desired to model the high rate deformation of such materials, it is of great importance to gather data on their response so that predictive constitutive models can be constructed. This paper reviews the state of the art concerning what is known about the mechanical response of high energy materials. Examples of such materials are polymer bonded explosives (used in munitions), propellants (used to propel rockets), and pyrotechnics (used to initiate munitions and also in flares).

  19. In vivo liver tissue mechanical properties by Transient Elastography: comparison with Dynamic Mechanical Analysis.

    PubMed

    Chatelin, Simon; Oudry, Jennifer; Périchon, Nicolas; Sandrin, Laurent; Allemann, Pierre; Soler, Luc; Willinger, Rémy

    2011-01-01

    Understanding the mechanical properties of human liver is one of the most critical aspects of its numerical modeling for medical applications or impact biomechanics. Generally, model constitutive laws come from in vitro data. However, the elastic properties of liver may change significantly after death and with time. Furthermore, in vitro liver elastic properties reported in the literature have often not been compared quantitatively with in vivo liver mechanical properties on the same organ. In this study, both steps are investigated on porcine liver. The elastic property of the porcine liver, given by the shear modulus G, was measured by both Transient Elastography (TE) and Dynamic Mechanical Analysis (DMA). Shear modulus measurements were realized on in vivo and in vitro liver to compare the TE and DMA methods and to study the influence of testing conditions on the liver viscoelastic properties. In vitro results show that elastic properties obtained by TE and DMA are in agreement. Liver tissue in the frequency range from 0.1 to 4 Hz can be modeled by a two-mode relaxation model. Furthermore, results show that the liver is homogeneous, isotropic and more elastic than viscous. Finally, it is shown in this study that viscoelastic properties obtained by TE and DMA change significantly with post mortem time and with the boundary conditions. PMID:21811013

  20. Hyperoxia alters the mechanical properties of alveolar epithelial cells.

    PubMed

    Roan, Esra; Wilhelm, Kristina; Bada, Alex; Makena, Patrudu S; Gorantla, Vijay K; Sinclair, Scott E; Waters, Christopher M

    2012-06-15

    Patients with severe acute lung injury are frequently administered high concentrations of oxygen (>50%) during mechanical ventilation. Long-term exposure to high levels of oxygen can cause lung injury in the absence of mechanical ventilation, but the combination of the two accelerates and increases injury. Hyperoxia causes injury to cells through the generation of excessive reactive oxygen species. However, the precise mechanisms that lead to epithelial injury and the reasons for increased injury caused by mechanical ventilation are not well understood. We hypothesized that alveolar epithelial cells (AECs) may be more susceptible to injury caused by mechanical ventilation if hyperoxia alters the mechanical properties of the cells causing them to resist deformation. To test this hypothesis, we used atomic force microscopy in the indentation mode to measure the mechanical properties of cultured AECs. Exposure of AECs to hyperoxia for 24 to 48 h caused a significant increase in the elastic modulus (a measure of resistance to deformation) of both primary rat type II AECs and a cell line of mouse AECs (MLE-12). Hyperoxia also caused remodeling of both actin and microtubules. The increase in elastic modulus was blocked by treatment with cytochalasin D. Using finite element analysis, we showed that the increase in elastic modulus can lead to increased stress near the cell perimeter in the presence of stretch. We then demonstrated that cyclic stretch of hyperoxia-treated cells caused significant cell detachment. Our results suggest that exposure to hyperoxia causes structural remodeling of AECs that leads to decreased cell deformability. PMID:22467640

  1. Mechanical properties of Gd123 superconducting bulks at 77 K

    NASA Astrophysics Data System (ADS)

    Fujimoto, H.; Murakami, A.

    2012-05-01

    Mechanical properties of melt-grown GdBa2Cu3Ox (Gd123) large single-domain superconducting bulks with 10 wt% of Ag2O and 0.5 wt% of Pt have been evaluated at 77 K through flexural tests, on specimens cut from the samples, in order to estimate the mechanical properties of the Gd123 material without metal substrates, buffer layers or stabilization layers. The densified bulk was 46 mm in diameter and 25 mm in thickness, with low void density, and the standard bulk was around the same size, with voids. The results show that the mechanical properties of the densified Gd123 bulk with low void density are better than those of the standard Gd123 bulk with voids. We also compared the mechanical properties of as-grown bulks with those of annealed bulks. The relations between the microstructure and the flexural strength or the fracture toughness of the densified Gd123 bulk have been shown.

  2. Mechanical Properties of Irradiated Polarization-Maintaining Optical Fibers

    NASA Technical Reports Server (NTRS)

    Moeti, L.; Moghazy, S.; Ally, A.; Barnes, S.; Watkins, L.; Cuddihy, E.

    1996-01-01

    Polarization-maintaining optical fibers, referred to as PANDA fibers, were subjected to Cobalt 60 radiation (300,000 Rad). The mechanical properties of the PANDA fibers were measured after exposure to gamma radiation and compared to non-irradiated PANDA fibers.

  3. Mechanical shear and tensile properties of selected biomass stems

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Lignocellulosic biomass, such as big bluestem, corn stalk, intermediate wheat grass and switchgrass stem are abundant and dominant species in the Midwest region of US. There is a need to understand the mechanical properties for these crops for better handling and processing of the biomass feedstocks...

  4. Mechanical properties of single pellets containing acrylic polymers.

    PubMed

    Wang, C C; Zhang, G; Shah, N H; Infeld, M H; Malick, A W; McGinity, J W

    1996-07-01

    Three aqueous-based acrylic latex dispersions, Eudragit L 30 D, NE 30 D, and RS 30 D, were incorporated as granulating binders into a powder blend of microcrystalline cellulose and anhydrous lactose by wet massing. Spheronized pellets were prepared by extrusion-spheronization and the mechanical properties of single pellets, including the tensile strength at break and the Young's modulus were determined from the stress-strain profiles using a Chatillon TCD-200 tension/compression digital test gauge. The influence of particle size and plasticizer on the mechanical properties of pellets containing Eudragit RS 30 D was investigated. All bead formulations deformed by brittle fracture under a diametral compression force. The mechanical strength was found to be influenced by the adhesive strength between the polymers and the powder particles instead of the cohesive strength of each polymer. The Young's modulus and the tensile strength were also significantly influenced by the type and concentration of polymer, the presence of plasticizer, and the particle size of the beads. The results were related to the properties of the polymers and the fracture mechanisms of the beads. Furthermore, the polymer type and the incorporation of plasticizer influenced the susceptibility of the moistened extruded granules to the shearing forces during the spheronization process, which influenced the surface morphological properties of the pellets. PMID:9552348

  5. Mechanical and physical properties of modern boron fibers

    NASA Technical Reports Server (NTRS)

    Dicarlo, J. A.

    1978-01-01

    The results of accurate measurements of the modern boron fiber's Young's modulus, flexural modulus, shear modulus, and Poisson's ratio are reported. Physical property data concerning fiber density, thermal expansion, and resistance obtained during the course of the mechanical studies are also given.

  6. Sterilizing elastomeric chains without losing mechanical properties. Is it possible?

    PubMed Central

    Pithon, Matheus Melo; Ferraz, Caio Souza; Rosa, Francine Cristina Silva; Rosa, Luciano Pereira

    2015-01-01

    OBJECTIVE: To investigate the effects of different sterilization/disinfection methods on the mechanical properties of orthodontic elastomeric chains. METHODS: Segments of elastomeric chains with 5 links each were sent for sterilization by cobalt 60 (Co60) (20 KGy) gamma ray technology. After the procedure, the elastomeric chains were contaminated with clinical samples of Streptococcus mutans. Subsequently, the elastomeric chains were submitted to sterilization/disinfection tests carried out by means of different methods, forming six study groups, as follows: Group 1 (control - without contamination), Group 2 (70°GL alcohol), Group 3 (autoclave), Group 4 (ultraviolet), Group 5 (peracetic acid) and Group 6 (glutaraldehyde). After sterilization/disinfection, the effectiveness of these methods, by Colony forming units per mL (CFU/mL), and the mechanical properties of the material were assessed. Student's t-test was used to assess the number of CFUs while ANOVA and Tukey's test were used to assess elastic strength. RESULTS: Ultraviolet treatment was not completely effective for sterilization. No loss of mechanical properties occurred with the use of the different sterilization methods (p > 0.05). CONCLUSION: Biological control of elastomeric chains does not affect their mechanical properties. PMID:26154462

  7. Barrier and Mechanical Properties of Starch-Clay Nanocomposite Films

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The poor barrier and mechanical properties of biopolymer-based food packaging can potentially be enhanced by the use of layered silicates (nanoclay) to produce nanocomposites. In this study, starch-clay nano-composites were synthesized by a melt extrusion method. Natural (MMT) and organically modifi...

  8. Thermal treatment and mechanical properties of aluminum-2021

    NASA Technical Reports Server (NTRS)

    Brennecke, M. W.

    1970-01-01

    Mechanical properties, after thermal treatments, are summarized for sheet and plate of copper-rich, high-strength, heat-treatable aluminum-2021. The alloy is quench sensitive, quench rate and variations in aging affect corrosion behavior. Aging effects on yield strength, tensile strength, and elongation of sheet and plate are compared.

  9. Enhanced Graphene Mechanical Properties through Ultrasmooth Copper Growth Substrates.

    PubMed

    Griep, Mark H; Sandoz-Rosado, Emil; Tumlin, Travis M; Wetzel, Eric

    2016-03-01

    The combination of extraordinary strength and stiffness in conjunction with exceptional electronic and thermal properties in lightweight two-dimensional materials has propelled graphene research toward a wide array of applications including flexible electronics and functional structural components. Tailoring graphene's properties toward a selected application requires precise control of the atomic layer growth process, transfer, and postprocessing procedures. To date, the mechanical properties of graphene are largely controlled through postprocess defect engineering techniques. In this work, we demonstrate the role of varied catalytic surface morphologies on the tailorability of subsequent graphene film quality and breaking strength, providing a mechanism to tailor the physical, electrical, and mechanical properties at the growth stage. A new surface planarization methodology that results in over a 99% reduction in Cu surface roughness allows for smoothness parameters beyond that reported to date in literature and clearly demonstrates the role of Cu smoothness toward a decrease in the formation of bilayer graphene defects, altered domain sizes, monolayer graphene sheet resistance values down to 120 Ω/□ and a 78% improvement in breaking strength. The combined electrical and mechanical enhancements achieved through this methodology allows for the direct growth of application quality flexible transparent conductive films with monolayer graphene. PMID:26882091

  10. Physical and mechanical properties of the lunar soil (a review)

    NASA Astrophysics Data System (ADS)

    Slyuta, E. N.

    2014-09-01

    We review the data on the physical and mechanical properties of the lunar soil that were acquired in the direct investigations on the lunar surface carried out in the manned and automatic missions and in the laboratory examination of the lunar samples returned to the Earth. In justice to the American manned program Apollo, we show that a large volume of the data on the properties of the lunar soil was also obtained in the Soviet automatic program Lunokhod and with the automatic space stations Luna-16, -20, and -24 that returned the lunar soil samples to the Earth. We consider all of the main physical and mechanical properties of the lunar soil, such as the granulometric composition, density and porosity, cohesion and adhesion, angle of internal friction, shear strength of loose soil, deformation characteristics (the deformation modulus and Poisson ratio), compressibility, and the bearing capacity, and show the change of some properties versus the depth. In most cases, the analytical dependence of the main parameters is presented, which is required in developing reliable engineering models of the lunar soil. The main physical and mechanical properties are listed in the summarizing table, and the currently available models and simulants of the lunar soil are reviewed.

  11. Porous polymer electrolytes with high ionic conductivity and good mechanical property for rechargeable batteries

    NASA Astrophysics Data System (ADS)

    Liang, Bo; Jiang, Qingbai; Tang, Siqi; Li, Shengliang; Chen, Xu

    2016-03-01

    Porous polymer electrolytes (PPEs) are attractive for developing lithium-ion batteries because of the combined advantages of liquid and solid polymer electrolytes. In the present study, a new porous polymer membrane doped with phytic acid (PA) is prepared, which is used as a crosslinker in polymer electrolyte matrix and can also plasticize porous polymer electrolyte membranes, changing them into soft tough flexible materials. A PEO-PMMA-LiClO4-x wt.% PA (x = weight of PA/weight of polymer, PEO: poly(ethylene oxide); PMMA: poly(methyl methacrylate)) polymer membrane is prepared by a simple evaporation method. The effects of the ratio of PA to PEO-PMMA on the properties of the porous membrane, including morphology, porous structure, and mechanical property, are systematically studied. PA improves the porous structure and mechanical properties of polymer membrane. The maximum tensile strength and elongation of the porous polymer membranes are 20.71 MPa and 45.7% at 15 wt.% PA, respectively. Moreover, the PPEs with 15 wt.% PA has a conductivity of 1.59 × 10-5 S/cm at 20 °C, a good electrochemical window (>5 V), and a low interfacial resistance. The results demonstrate the compatibility of the mechanical properties and conductivity of the PPEs, indicating that PPEs have good application prospects for lithium-ion batteries.

  12. Probing Mechanical Properties of Rock with InSAR

    NASA Astrophysics Data System (ADS)

    Jónsson, S.

    2012-04-01

    Interferometric Synthetic Aperture Radar (InSAR) observations from satellites have revolutionized our crustal deformation measurement capabilities with its high spatial resolution, global coverage, and low cost. The high spatial resolution (typically 5-20 m) allows us to map many small-scale surface deformation phenomena in great detail. These include surface faulting, fissuring, fault creep, and other strain localization phenomena. Another advantage of the small-scale deformation mapping is that it can provide information about mechanical properties of near-surface rocks. Several studies have already been published on using InSAR to probe material properties of rock. Strain localizations at fault zones have been observed in co-seismic deformation fields near to large earthquakes and interpreted as expressions of weak fault zone materials that are a factor of two more compliant than the surrounding unbroken rock [Fialko et al., 2002]. Peltzer et al. [1999] argued that asymmetries in coseismic deformation patterns observed by InSAR showed evidence for non-linear elasticity, i.e. that the elastic moduli of shallow crustal material are different for compression and extension, due to small-scale cracks in the medium. This interpretation was later disputed by Funning et al. [2007], who provided an alternative explanation for observed deformation pattern based on along-strike variations in fault geometry and slip. In addition, observations and modeling of poro-elastic rebound after earthquakes have provided information about the difference in undrained and drained Poisson's ratio values of the near-surface rocks [Peltzer et al., 1996; Jónsson et al., 2003]. More recently we have used InSAR observations to put bounds on the tensional bulk strength of surface rocks. A dyke intrusion that took place in western Saudi Arabia in 2009 caused many moderate-sized earthquakes and extensive surface faulting. InSAR data of the area show that large-scale (40 km x 40 km) east

  13. Brillouin microspectroscopy of nanostructured biomaterials: photonics assisted tailoring mechanical properties

    NASA Astrophysics Data System (ADS)

    Meng, Zhaokai; Jaiswal, Manish K.; Chitrakar, Chandani; Thakur, Teena; Gaharwar, Akhilesh K.; Yakovlev, Vladislav V.

    2016-03-01

    Developing new biomaterials is essential for the next-generation of materials for bioenergy, bioelectronics, basic biology, medical diagnostics, cancer research, and regenerative medicine. Specifically, recent progress in nanotechnology has stimulated the development of multifunctional biomaterials for tissue engineering applications. The physical properties of nanocomposite biomaterials, including elasticity and viscosity, play key roles in controlling cell fate, which underlines therapeutic success. Conventional mechanical tests, including uniaxial compression and tension, dynamic mechanical analysis and shear rheology, require mechanical forces to be directly exerted onto the sample and therefore may not be suitable for in situ measurements or continuous monitoring of mechanical stiffness. In this study, we employ spontaneous Brillouin spectroscopy as a viscoelasticity-specific probing technique. We utilized a Brillouin spectrometer to characterize biomaterial's microscopic elasticity and correlated those with conventional mechanical tests (e.g., rheology).

  14. Mechanical properties of the bovine claw horn during lactation.

    PubMed

    Winkler, B; Margerison, J K

    2012-04-01

    Claw horn disorders are one of the main causes of lameness in dairy cows globally. This study aimed to develop material testing techniques to assess changes in the mechanical properties of bovine claw horn (BCH) and to compare these mechanical properties with existing methods of assessing claw horn disorders during lactation. Lameness was also measured through locomotion scoring to assess the clinical significance of changes observed in the scoring for lesions. Experiment 1 used 8 claws collected from four 12 to 18 mo old beef heifers, to develop BCH sample storage methods and techniques to test the mechanical properties of BCH (puncture resistance and elastic modulus). The increase in the moisture content of BCH had a significant negative exponential effect on the elastic modulus of the sole and white line claw horn and a linear reduction in the puncture resistance of BCH. Placing BCH samples in sealed plastic bags and storing them either at 2°C or by freezing samples at -22°C did not alter the dry matter content and, consequently, the mechanical properties of the claw horn tissue. In experiment 2, BCH was collected from 36 lactating dairy cows and mechanical properties were tested using puncture resistance. Puncture resistance of the sole area of the claw horn decreased significantly when hemorrhages in the tested area increased. The puncture resistance of the sole and white line areas decreased at d 160 postpartum when the cows exhibited higher lesion scores and was lower in hind claws that had higher lesion scores when compared with the fore claws. The highest puncture resistance was found at 270 d postpartum, when the animals were at pasture. Puncture resistance was found to be an effective technique for assessing the effect of period of lactation and increasing hemorrhage levels on the mechanical properties and structural strength of bovine claw horn. It was found to be a good method of comparing changes and differences in mechanical properties and

  15. Relationship of the optical absorption and scattering properties with mechanical and structural properties of apple tissue

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Optical absorption and scattering properties of fruit change with the physiological and biochemical activities in the tissue during ripening and postharvest storage. But it has not been well understood on how these changes are related to the structural and mechanical properties of fruit. This resear...

  16. Mechanical property determination of high conductivity metals and alloys

    NASA Technical Reports Server (NTRS)

    Harrod, D. L.; Vandergrift, E.; France, L.

    1973-01-01

    Pertinent mechanical properties of three high conductivity metals and alloys; namely, vacuum hot pressed grade S-200E beryllium, OFHC copper and beryllium-copper alloy no. 10 were determined. These materials were selected based on their possible use in rocket thrust chamber and nozzle hardware. They were procured in a form and condition similar to that which might be ordered for actual hardware fabrication. The mechanical properties measured include (1) tension and compression stress strain curves at constant strain rate (2) tensile and compressive creep, (3) tensile and compressive stress-relaxation behavior and (4) elastic properties. Tests were conducted over the temperature range of from 75 F to 1600 F. The resulting data is presented in both graphical and tabular form.

  17. Thin film characterization using a mechanical properties microprobe

    NASA Astrophysics Data System (ADS)

    Oliver, W. C.; McHargue, C. J.; Zinkle, S. J.

    A new ultra-low load microindentation system has been acquired in the ORNL Metals and Ceramics Division. The system's spatial resolution and its data acquisition capabilities allow the determination of several mechanical properties from volumes of material with submicron dimension; hence, the term Mechanical Properties Microprobe (MPM). Research with the MPM at Oak Ridge has led to improved techniques for determining the plastic and elastic properties of materials using microindentation experiments. The techniques have been applied to thin films created by ion implanting metals and ceramics, radiation damaged materials, and thin hard coatings of TiN. Changes in the strength (hardness) and modulus have been measured in films as thin as 200 nm.

  18. Mechanical and thermal properties of the Czech marbles

    NASA Astrophysics Data System (ADS)

    Čáchová, Monika; Koňáková, Dana; Vejmelková, Eva; Keppert, Martin; Černý, Robert

    2016-06-01

    The paper is dealing with selected parameters of four marbles with respect to their utilization as building materials. Stones from four function quarries in the Czech Republic were chosen and scopes of physical properties were determined. Basic physical, mechanical and thermal properties belong among studied characteristics. Bulk density of studied marbles is in average 2750 kg/m3, matrix density 2770 kg/m3, open porosity 0.7%. Pore structure show similar distributions. Mechanical properties show more differences; however minimal value of compressive strength was 66.5 MPa, while maximum was 174 MPa. Thermal conductivity of studied marbles was about 2.955 W/mK. Last measured characteristic was specific heat capacity; its average value was 609 J/kgK.

  19. Moisture effect on mechanical properties of polymeric composite materials

    NASA Astrophysics Data System (ADS)

    Airale, A. G.; Carello, M.; Ferraris, A.; Sisca, L.

    2016-05-01

    The influence of moisture on the mechanical properties of fibre-reinforced polymer matrix composites (PMCs) was investigated. Four materials had been take into account considering: both 2×2-Twill woven carbon fibre or glass fibre, thermosetting matrix (Epoxy Resin) or thermoplastic matrix (Polyphenylene Sulfide). The specimens were submitted for 1800 hours to a hygrothermic test to evaluate moisture absorption on the basis of the Fick's law and finally tested to verify the mechanical properties (ultimate tensile strength). The results showed that the absorbed moisture decreases those properties of composites which were dominated by the matrix or the interface, while was not detectable the influence of water on the considered fibre. An important result is that the diffusion coefficient is highest for glass/PPS and lowest for carbon/epoxy composite material. The results give useful suggestions for the design of vehicle components that are exposed to environmental conditions (rain, snow and humidity).

  20. Processing dependence of mechanical properties of metallic glass nanowires

    SciTech Connect

    Zhang, Qi; Li, Mo; Li, Qi-Kai

    2015-02-16

    Compared to their crystalline counterparts, nanowires made of metallic glass have not only superb properties but also remarkable processing ability. They can be processed easily and cheaply like plastics via a wide range of methods. To date, the underlying mechanisms of how these different processing routes affect the wires' properties as well as the atomic structure remains largely unknown. Here, by using atomistic modeling, we show that different processing methods can greatly influence the mechanical properties. The nanowires made via focused ion beam milling and embossing exhibit higher strength but localized plastic deformation, whereas that made by casting from liquid shows excellent ductility with homogeneous deformation but reduced strength. The different responses are reflected sensitively in the underlying atomic structure and packing density, some of which have been observed experimentally. The presence of the gradient of alloy concentration and surface effect will be discussed.

  1. Mechanical properties of silver halide core/clad IR fibers

    NASA Astrophysics Data System (ADS)

    Shalem, Shaul; German, Alla; Moser, Frank; Katzir, Abraham

    1996-04-01

    We have developed core/clad polycrystalline silver halide optical fibers with a loss of roughly 0.3 dB/m at 10.6 micrometers. Such fibers, with core diameters 0.3 - 0.6 mm and lengths of 1 to 2 meters are capable of continuously delivering output power densities as high as 14 KW/cm2. The fibers were repetitively bent in the plastic and elastic regimes and the optical transmission monitored during bending. The mechanical properties of the core/clad fibers and of the core only fibers are similar. It was also demonstrated that the 'bending' properties of the core/clad fibers are determined by the cladding material. Our investigations suggest that proper design of the core/clad structure may give significant improvement in mechanical properties such as more cycles to optical failure. This will be very important especially for endoscopic laser surgery and other medical applications.

  2. Mechanical and wear properties of PMMA/PVDF microfilled systems

    SciTech Connect

    Garcia, J.L.; Koelling, K.W.; Seghi, R.R.

    1996-12-31

    There is a clinical need in fixed prosthodontics for aesthetic materials that are biologically compatible. Polymethylmethacrylate (PMMA) has been used extensively in dental applications. Blends of PMMA and polyvinylidene fluoride (PVDF) are a new class of materials that might perform as aesthetic restorative materials. The fracture properties of PMMA have been intensively studied because it is an amorphous glass below 110{degrees}C, thus exhibiting brittle fracture under normal testing conditions below about 85{degrees}C. However, this brittle behavior leads to poor wear resistance. The properties of the matrix can be tailored by blending with PVDF. The blends are composed of homogeneous mixtures of the two polymers at the molecular level. Polyvinylidene fluoride molecules do not contribute to the mechanical yield behavior of the blend but do act as plasticizers. Improvements in the mechanical properties may be achieved by incorporating a filler into the polymer matrix.

  3. Determining the Mechanical Properties of Lattice Block Structures

    NASA Technical Reports Server (NTRS)

    Wilmoth, Nathan

    2013-01-01

    Lattice block structures and shape memory alloys possess several traits ideal for solving intriguing new engineering problems in industries such as aerospace, military, and transportation. Recent testing at the NASA Glenn Research Center has investigated the material properties of lattice block structures cast from a conventional aerospace titanium alloy as well as lattice block structures cast from nickel-titanium shape memory alloy. The lattice block structures for both materials were sectioned into smaller subelements for tension and compression testing. The results from the cast conventional titanium material showed that the expected mechanical properties were maintained. The shape memory alloy material was found to be extremely brittle from the casting process and only compression testing was completed. Future shape memory alloy lattice block structures will utilize an adjusted material composition that will provide a better quality casting. The testing effort resulted in baseline mechanical property data from the conventional titanium material for comparison to shape memory alloy materials once suitable castings are available.

  4. Mechanical properties of graphynes under shearing and bending

    NASA Astrophysics Data System (ADS)

    Yi, Lijun; Zhang, Yingyan; Feng, Xiqiao; Chang, Tienchong; Wang, Ji; Du, Jianke; Zhou, Jianxin

    2016-05-01

    Graphynes are the allotrope of graphene. In this work, extensive molecular dynamics simulations are performed on four different graphynes ( α - , β - , γ - , and 6,6,12-graphynes) to explore their mechanical properties (shear modulus, shear strength, and bending rigidity) under shearing and bending. While the shearing properties are anisotropic, the bending rigidity is almost independent of the chirality of graphynes. We also find that the shear modulus and shear fracture strength of graphynes decrease with increasing temperature. The effect of the percentage of the acetylenic linkages on the shear mechanical properties and bending rigidity is investigated. It is shown that the fracture shear strengths and bending rigidities of the four types of graphynes decrease, while the fracture shear strain increases, with increasing percentages of the acetylenic linkages. Significant wrinkling is observed in graphyne under shear strain. The influence of the temperatures and percentages of the acetylenic linkages on the ratio of amplitude-to-wavelength in the wrinkles are examined.

  5. Mechanical properties of 4d transition metals in molten state

    NASA Astrophysics Data System (ADS)

    Singh, Deobrat; Sonvane, Yogesh; Thakor, P. B.

    2016-05-01

    Mechanical properties of 4d transition metals in molten state have been studied in the present study. We have calculated mechanical properties such as isothermal bulk modulus (B), modulus of rigidity (G), Young's modulus (Y) and Hardness have also been calculated from the elastic part of the Phonon dispersion curve (PDC). To describe the structural information, we have used different structure factor S(q) using Percus-Yevick hard sphere (PYHS) reference systems along with our newly constructed parameter free model potential.To see the influence of exchange and correlation effect on the above said properties of 3d liquid transition metals, we have used Sarkar et al (S)local field correction functions. Present results have been found good in agreement with available experimental data.

  6. The influence of microstructure on the mechanical properties of solder

    SciTech Connect

    Morris, J.W. Jr.; Reynolds, H.L.

    1996-06-01

    Solder joints in microelectronics devices consist of low-melting solder compositions that wet and join metal contacts and are, ordinarily, used at high homologous temperatures in the as-solidified condition. Differences in solidification rate and substrate interactions have the consequence that even solder joints of similar compositions exhibit a wide range of microstructures. The variation in microstructure causes a variation in properties; in particular, the high-temperature creep properties that govern much of the mechanical behavior of the solder may differ significantly from joint to joint. The present paper reviews the varieties of microstructure that are found in common solder joints, and describes some of the ways in which microstructural changes affect mechanical properties and joint reliability.

  7. Insect mandibles—comparative mechanical properties and links with metal incorporation

    NASA Astrophysics Data System (ADS)

    Cribb, Bronwen W.; Stewart, Aaron; Huang, Han; Truss, Rowan; Noller, Barry; Rasch, Ronald; Zalucki, Myron P.

    2008-01-01

    A number of arthropod taxa contain metals in their mandibles (jaws), such as zinc, manganese, iron, and calcium. The occurrence of zinc and its co-located halogen chlorine have been studied in relation to the mechanical properties and shown to be linked in a direct fashion with increasing concentration. Hardness along with elastic modulus (stiffness) has also been linked to zinc and halogen concentration in some marine polychaete worms. The metal appears to be incorporated within the biological matrix, possibly bonding with proteins. However, the comparative advantage of metal inclusion has not been tested. It is possible that without metals, alternative mechanisms are used to achieve hardness of equal value in similar ‘tools’ such as mandibles. This question has direct bearing on the significance of metal hardening. In the present article, we compare across mandibles from six termite species, including samples with major zinc concentration, minor manganese, and no metals. Nanoindentation, electron microscopy, and electron microanalysis are used to assess metal concentration, form, and mechanical properties. The data demonstrate that termite mandibles lacking metals when fully developed have lower values for hardness and elastic modulus. Zinc is linked to a relative 20% increase in hardness when compared with mandibles devoid of metals. The similar transition metal, manganese, found in minor concentrations, is not linked to any significant increase in these mechanical properties. This raises the question of the function of manganese, which is as commonly found in insect mandibles as zinc and often located in the same mandibles.

  8. Insect mandibles--comparative mechanical properties and links with metal incorporation.

    PubMed

    Cribb, Bronwen W; Stewart, Aaron; Huang, Han; Truss, Rowan; Noller, Barry; Rasch, Ronald; Zalucki, Myron P

    2008-01-01

    A number of arthropod taxa contain metals in their mandibles (jaws), such as zinc, manganese, iron, and calcium. The occurrence of zinc and its co-located halogen chlorine have been studied in relation to the mechanical properties and shown to be linked in a direct fashion with increasing concentration. Hardness along with elastic modulus (stiffness) has also been linked to zinc and halogen concentration in some marine polychaete worms. The metal appears to be incorporated within the biological matrix, possibly bonding with proteins. However, the comparative advantage of metal inclusion has not been tested. It is possible that without metals, alternative mechanisms are used to achieve hardness of equal value in similar 'tools' such as mandibles. This question has direct bearing on the significance of metal hardening. In the present article, we compare across mandibles from six termite species, including samples with major zinc concentration, minor manganese, and no metals. Nanoindentation, electron microscopy, and electron microanalysis are used to assess metal concentration, form, and mechanical properties. The data demonstrate that termite mandibles lacking metals when fully developed have lower values for hardness and elastic modulus. Zinc is linked to a relative 20% increase in hardness when compared with mandibles devoid of metals. The similar transition metal, manganese, found in minor concentrations, is not linked to any significant increase in these mechanical properties. This raises the question of the function of manganese, which is as commonly found in insect mandibles as zinc and often located in the same mandibles. PMID:17646951

  9. Effects of heat treatment on the mechanical properties of SiC p/6061 Al composite

    NASA Astrophysics Data System (ADS)

    Aldun, D.; Martin, P.; Sun, J.

    1992-10-01

    Metal-matrix composites have been receiving considerable attention as light-weight materials for use in many advanced technology applications. Silicon carbide (SiC) particles and whiskers have several advantages over other discontinuous reinforcements. Studies have shown that heat treatment can change the mechanical properties of metal-matrix composites. Modified heat treatments were developed for SiC p/6061 Al composites through a series of heat treatment with varied solution temperatures and aging time. Mechanical tests were conducted to determine the mechanical properties of the composites in three conditions; as-received, annealed, and heat treated. The modified heat treatments resulted in increases in the yield strength of up to 12% over the manufacturer’s reported yield strength for the standard T6 heat treatment. The trends which occur during heat treatment of SiC p/6061 Al are simular to those which occur during heat treatment of aluminum alloys. In addition, the relationship between the mechanical properties and the heat treatment parameters was documented. Throughout this study, the values of elastic modules were rather erratic compared to the strength values. Scanning Electron Microscope fractographic analysis revealed various fracture initiation sites, such as particle clusters and iron inclusions.

  10. Multiscale Approach to Characterize Mechanical Properties of Tissue Engineered Skin.

    PubMed

    Tupin, S; Molimard, J; Cenizo, V; Hoc, T; Sohm, B; Zahouani, H

    2016-09-01

    Tissue engineered skin usually consist of a multi-layered visco-elastic material composed of a fibrillar matrix and cells. The complete mechanical characterization of these tissues has not yet been accomplished. The purpose of this study was to develop a multiscale approach to perform this characterization in order to link the development process of a cultured skin to the mechanical properties. As a proof-of-concept, tissue engineered skin samples were characterized at different stages of manufacturing (acellular matrix, reconstructed dermis and reconstructed skin) for two different aging models (using cells from an 18- and a 61-year-old man). To assess structural variations, bi-photonic confocal microscopy was used. To characterize mechanical properties at a macroscopic scale, a light-load micro-mechanical device that performs indentation and relaxation tests was designed. Finally, images of the internal network of the samples under stretching were acquired by combining confocal microscopy with a tensile device. Mechanical properties at microscopic scale were assessed. Results revealed that adding cells during manufacturing induced structural changes, which provided higher elastic modulus and viscosity. Moreover, senescence models exhibited lower elastic modulus and viscosity. This multiscale approach was efficient to characterize and compare skin equivalent samples and permitted the first experimental assessment of the Poisson's ratio for such tissues. PMID:26942585

  11. Short-range mechanical properties of skeletal and cardiac muscles.

    PubMed

    Campbell, Kenneth S

    2010-01-01

    Striated muscles are disproportionately stiff for small movements. This facet of their behavior can be demonstrated by measuring the force produced when the muscle is stretched more than about 1% of its initial length. When this is done, it can be seen that force rises rapidly during the initial phases of the movement and much less rapidly during the latter stages of the stretch. Experiments performed using chemically permeabilized skeletal and cardiac muscles show that the initial stiffness of the preparations increases in proportion with isometric force as the free Ca²(+) concentration in the bathing solution is raised from a minimal to a saturating value. This is strong evidence that the short-range mechanical properties of activated muscle result from stretching myosin cross-bridges that are attached between the thick and thin filaments. Relaxed intact muscles also exhibit short-range mechanical properties but the molecular mechanisms underlying this behavior are less clear. This chapter summarizes some of the interesting features of short-range mechanical properties in different types of muscle preparation, describes some of the likely underlying mechanisms and discusses the potential physiological significance of the behavior. PMID:20824529

  12. Influence of sedimentary environments on mechanical properties of clastic rocks

    NASA Astrophysics Data System (ADS)

    Meng, Zhaoping; Zhang, Jincai; Peng, Suping

    2006-10-01

    The sedimentary environments are the intrinsic factor controlling the mechanical properties of clastic rocks. Examining the relationship between rock sedimentary environments and rock mechanical properties gives a better understanding of rock deformation and failure mechanisms. In this study, more than 55 samples in coal measures were taken from seven different lithologic formations in eastern China. Using the optical microscope the sedimentary characteristics, such as components of clastic rocks and sizes of clastic grains were quantitatively tested and analyzed. The corresponding mechanical parameters were tested using the servo-controlled testing system. Different lithologic attributes in the sedimentary rocks sampled different stress-strain behaviors and failure characteristics under different confining pressures, mainly due to different compositions and textures. Results demonstrate that clastic rocks have the linear best-fit for Mohr-Coulomb failure criterion. The elastic moduli in clastic rocks are highly dependent upon confining pressures, unlike hard rocks. The envelope lines of the mechanical properties versus the contents of quartz, detritus of the grain diameter of more than 0.03 mm, and grain size in clastic rocks are given. The compressive strength or elastic modulus and the grain diameter have a non-monotonic relation and demonstrate the “grain-diameter softening” effect.

  13. Persistent Infection by a Mycobacterium tuberculosis Strain That Was Theorized To Have Advantageous Properties, as It Was Responsible for a Massive Outbreak.

    PubMed

    Pérez-Lago, Laura; Navarro, Yurena; Montilla, Pedro; Comas, Iñaki; Herranz, Marta; Rodríguez-Gallego, Carlos; Ruiz Serrano, María Jesús; Bouza, Emilio; García de Viedma, Darío

    2015-11-01

    The strains involved in tuberculosis outbreaks are considered highly virulent and transmissible. We analyzed the case of a patient in Madrid, Spain, who was persistently infected over an 8-year period by the same Beijing Mycobacterium tuberculosis strain. The strain was responsible for a severe outbreak on Gran Canaria Island. The case provides us with a unique opportunity to challenge our assumptions about M. tuberculosis Beijing strains. No clinical/radiological findings consistent with a virulent strain were documented, and the in vitro growth rate of the strain in macrophages was only moderate. No secondary cases stemming from this prolonged active case were detected in the host population. The strain did not acquire resistance mutations, despite constant treatment interruptions, and it remained extremely stable, as demonstrated by the lack of single-nucleotide-polymorphism (SNP)-based differences between the sequential isolates. Our data suggest that the general assumption about M. tuberculosis Beijing strains having advantageous properties (in terms of virulence, transmissibility, and the tendency to acquire mutations and resistance) is not always accurate. PMID:26269618

  14. Persistent Infection by a Mycobacterium tuberculosis Strain That Was Theorized To Have Advantageous Properties, as It Was Responsible for a Massive Outbreak

    PubMed Central

    Pérez-Lago, Laura; Navarro, Yurena; Montilla, Pedro; Comas, Iñaki; Herranz, Marta; Rodríguez-Gallego, Carlos; Ruiz Serrano, María Jesús; Bouza, Emilio

    2015-01-01

    The strains involved in tuberculosis outbreaks are considered highly virulent and transmissible. We analyzed the case of a patient in Madrid, Spain, who was persistently infected over an 8-year period by the same Beijing Mycobacterium tuberculosis strain. The strain was responsible for a severe outbreak on Gran Canaria Island. The case provides us with a unique opportunity to challenge our assumptions about M. tuberculosis Beijing strains. No clinical/radiological findings consistent with a virulent strain were documented, and the in vitro growth rate of the strain in macrophages was only moderate. No secondary cases stemming from this prolonged active case were detected in the host population. The strain did not acquire resistance mutations, despite constant treatment interruptions, and it remained extremely stable, as demonstrated by the lack of single-nucleotide-polymorphism (SNP)-based differences between the sequential isolates. Our data suggest that the general assumption about M. tuberculosis Beijing strains having advantageous properties (in terms of virulence, transmissibility, and the tendency to acquire mutations and resistance) is not always accurate. PMID:26269618

  15. Effect of V or Zr addition on the mechanical properties of the mechanically alloyed Al-8wt%Ti alloys

    SciTech Connect

    Moon, I.H.; Lee, J.H.; Lee, K.M. . Dept. of Materials Engineering); Kim, Y.D. . Div. of Metals)

    1995-01-01

    Mechanical alloying (MA) of Al-Ti alloy, being a solid state process, offers the unique advantage of producing homogeneous and fine dispersions of thermally stable Al[sub 3]Ti phase, where the formation of the fine Al[sub 3]Ti phase by the other method is restricted from the thermodynamic viewpoint. The MA Al-Ti alloys show substantially higher strength than the conventional Al alloys at the elevated temperature due to the presence of Al[sub 3]Ti as well as Al[sub 4]C[sub 3] and Al[sub 2]O[sub 3], of which the last two phases were introduced during MA process. The addition of V or Zr to Al-Ti alloy was known to decrease the lattice mismatch between the intermetallic compound and the aluminum matrix, and such decrease in lattice mismatching can influence positively the high temperature mechanical strength of the MA Al-Ti by increasing the resistance to dispersoid coarsening at the elevated temperature. In the present study, therefore, the mechanical behavior of the MA Al-Ti-V and Al-Ti-Zr alloys were investigated in order to evaluate the effect of V or Zr addition on the mechanical properties of the MA Al-8Ti alloy at high temperature.

  16. Mechanical Properties of Materials with Nanometer Scale Microstructures

    SciTech Connect

    William D. Nix

    2004-10-31

    We have been engaged in research on the mechanical properties of materials with nanometer-scale microstructural dimensions. Our attention has been focused on studying the mechanical properties of thin films and interfaces and very small volumes of material. Because the dimensions of thin film samples are small (typically 1 mm in thickness, or less), specialized mechanical testing techniques based on nanoindentation, microbeam bending and dynamic vibration of micromachined structures have been developed and used. Here we report briefly on some of the results we have obtained over the past three years. We also give a summary of all of the dissertations, talks and publications completed on this grant during the past 15 years.

  17. Using optical tweezers to study mechanical properties of collagen

    NASA Astrophysics Data System (ADS)

    Rezaei, Naghmeh; Downing, Benjamin P. B.; Wieczorek, Andrew; Chan, Clara K. Y.; Welch, Robert Lindsay; Forde, Nancy R.

    2011-08-01

    The mechanical response of biological molecules at the microscopic level contributes significantly to their function. Optical tweezers are instruments that enable scientists to study mechanical properties at microscopic levels. They are based on a highly focused laser beam that creates a trap for microscopic objects such as dielectric spheres, viruses, bacteria, living cells and organelles, and then manipulates them by applying forces in the picoNewton range (a range that is biologically relevant). In this work, mechanical properties of single collagen molecules are studied using optical tweezers. We discuss the challenges of stretching single collagen proteins, whose length is much less than the size of the microspheres used as manipulation handles, and show how instrumental design and biochemistry can be used to overcome these challenges.

  18. Quantitative Characterization of Mechanical Property of Annealed Monolayer Colloidal Crystal.

    PubMed

    Zhang, Lijing; Wang, Weiqi; Zheng, Lu; Wang, Xiuyu; Yan, Qingfeng

    2016-01-19

    Quantitative characterization of the mechanical properties of a polystyrene (PS) monolayer colloidal crystal (MCC) annealed with solvent vapor has been performed for the first time by means of atomic force microscopy nanoindentation. The results showed that both the compressive and bending elastic modulus of PS MCC increased with the prolongation of annealing time from initial to 13 min. When the annealing time reached 15 min or even more, the PS MCC almost deformed to a planar film, and the elastic modulus of the PS MCC presented a drastic increase. These results provide a basis for tailoring the mechanical properties of a polymer colloidal monolayer via solvent vapor annealing. Such self-supported and high-mechanical-strength colloidal monolayers can be transferred to other surfaces for potential and promising applications in the bottom-up fabrication of highly ordered nanostructured materials such as nano dot arrays, photonic crystals, and many others. PMID:26700374

  19. Mechanical Properties of Iron Alumininides Intermetallic Alloy with Molybdenum Addition

    SciTech Connect

    Zuhailawati, H.; Fauzi, M. N. A.

    2010-03-11

    In this work, FeAl-based alloys with and without molybdenum addition were fabricated by sintering of mechanically alloyed powders in order to investigate the effect of molybdenum on iron aluminide mechanical properties. Bulk samples were prepared by mechanical alloying for 4 hours, pressing at 360 MPa and sintering at 1000 deg. C for 2 hours. The specimens were tested in compression at room temperature using Instron machine. The phase identification and microstructure of the consolidated material was examined by x-ray diffraction and scanning electron microscope correspondingly. Results show that 2.5 wt%Mo addition significantly increased the ultimate stress and ultimate strain in compressive mode due to solid solution hardening. However, the addition of Mo more than 2.5 wt% was accompanied by a reduction in both properties caused by the presence of Mo-rich precipitate particles.

  20. Ultrasonic evaluation of the physical and mechanical properties of granites.

    PubMed

    Vasconcelos, G; Lourenço, P B; Alves, C A S; Pamplona, J

    2008-09-01

    Masonry is the oldest building material that survived until today, being used all over the world and being present in the most impressive historical structures as an evidence of spirit of enterprise of ancient cultures. Conservation, rehabilitation and strengthening of the built heritage and protection of human lives are clear demands of modern societies. In this process, the use of nondestructive methods has become much common in the diagnosis of structural integrity of masonry elements. With respect to the evaluation of the stone condition, the ultrasonic pulse velocity is a simple and economical tool. Thus, the central issue of the present paper concerns the evaluation of the suitability of the ultrasonic pulse velocity method for describing the mechanical and physical properties of granites (range size between 0.1-4.0 mm and 0.3-16.5 mm) and for the assessment of its weathering state. The mechanical properties encompass the compressive and tensile strength and modulus of elasticity, and the physical properties include the density and porosity. For this purpose, measurements of the longitudinal ultrasonic pulse velocity with distinct natural frequency of the transducers were carried out on specimens with different size and shape. A discussion of the factors that induce variations on the ultrasonic velocity is also provided. Additionally, statistical correlations between ultrasonic pulse velocity and mechanical and physical properties of granites are presented and discussed. The major output of the work is the confirmation that ultrasonic pulse velocity can be effectively used as a simple and economical nondestructive method for a preliminary prediction of mechanical and physical properties, as well as a tool for the assessment of the weathering changes of granites that occur during the serviceable life. This is of much interest due to the usual difficulties in removing specimens for mechanical characterization. PMID:18471849

  1. Probing mechanical properties of liposomes using acoustic sensors.

    PubMed

    Melzak, Kathryn A; Bender, Florian; Tsortos, Achilleas; Gizeli, Electra

    2008-08-19

    Acoustic devices were employed to characterize variations in the mechanical properties (density and viscoelasticity) of liposomes composed of 1-oleoyl-2-palmitoyl- sn-glycero-3-phosphocholine (POPC) and cholesterol. Liposome properties were modified in three ways. In some experiments, the POPC/cholesterol ratio was varied prior to deposition on the device surface. Alternatively, the ratio was changed in situ via either insertion of cholesterol or removal of cholesterol with beta-cyclodextrin. This was done for liposomes adsorbed directly on the device surface and for liposomes attached via a biotin-terminated poly(ethylene glycol) linker. The acoustic measurements make use of two simultaneous time-resolved signals: one signal is related to the velocity of the acoustic wave, while the second is related to dissipation of acoustic energy. Together, they provide information not only about the mass (or density) of the probed medium but also about its viscoelastic properties. The cholesterol-induced increase in the surface density of the lipid bilayer was indeed observed in the acoustic data, but the resulting change in signal was larger than expected from the change in surface density. In addition, increasing the bilayer resistance to stretching was found to lead to a greater dissipation of the acoustic energy. The acoustic response is assessed in terms of the possible distortions of the liposomes and the known effects of cholesterol on the mechanical properties of the lipid bilayer that encloses the aqueous core of the liposome. To aid the interpretation of the acoustic response, it is discussed how the above changes in the lipid bilayer will affect the effective viscoelastic properties of the entire liposome/solvent film on the scale of the acoustic wavelength. It was found that the acoustic device is very sensitive to the mechanical properties of lipid vesicles; the response of the acoustic device is explained, and the basic underlying mechanisms of interaction are

  2. Modeling of mechanical properties in alpha/beta-titanium alloys

    NASA Astrophysics Data System (ADS)

    Kar, Sujoy Kumar

    2005-11-01

    The accelerated insertion of titanium alloys in component application requires the development of predictive capabilities for various aspects of their behavior, for example, phase stability, microstructural evolution and property-microstructure relationships over a wide range of length and time scales. In this presentation some navel aspects of property-microstructure relationships and microstructural evolution in alpha/beta Ti alloys will be discussed. Neural Network (NN) Models based on a Bayesian framework have been developed to predict the mechanical properties of alpha/beta Ti alloys. The development of such rules-based model requires the population of extensive databases, which in the present case are microstructurally-based. The steps involved in database development include producing controlled variations of the microstructure using novel approaches to heat-treatments, the use of standardized stereology protocols to characterize and quantify microstructural features rapidly, and mechanical testing of the heat-treated specimens. These databases have been used to train and test NN Models for prediction of mechanical properties. In addition, these models have been used to identify the influence of individual microstructural features on the mechanical properties, consequently guiding the efforts towards development of more robust mechanistically based models. In order to understand the property-microstructure relationships, a detailed understanding of microstructure evolution is imperative. The crystallography of the microstructure developing as a result of the solid-state beta → beta+alpha transformation has been studied in detail by employing Scanning Electron Microscopy (SEM), Orientation Imaging Microscopy (in a high resolution SEM), site-specific TEM sample preparation using focused ion beam, and TEM based techniques. The influence of variant selection on the evolution of microstructure will be specifically addressed.

  3. Aging of ErT2 thin films: ERD analysis of mechanical property changes

    SciTech Connect

    Knapp, James A; Bond, Gillian

    2010-01-01

    Rare earth tritide films evolve as tritium decays into 3He, which forms bubbles that influence long-term film stability in applications such as neutron generators. We followed the properties of model ErT2 films as they aged using ERD analysis to monitor T and 3He profiles, nanoindentation testing for mechanical properties and transmission electron microscopy to characterize bubble growth. The profiles of T and 3He are separately measured in ERD using a E - E detector, taking advantage of the differences in energy loss within the E detector. The composition measured by ERD followed the expected build-up of 3He up to near critical release, where 3He begins to escape from the film as bubbles overlap. These measurements complement observations of the changing mechanical properties of these films, where the observed behavior divided into two regimes: a substantial increase in layer hardness but elasticity little changed over 18 months, followed by a decrease in elastic stiffness and a modest decrease in hardness over the final 24 months. The evolution of properties has been explained by a combination of dislocation pinning by the bubbles, elastic softening as the bubbles occupy an increasing fraction of the material, and details of bubble growth modes. The ERD measurements confirm that the changes in properties are due to changes in bubble morphology and not to changes in 3He or T content.

  4. The effect of crystallinity on the deformation mechanism and bulk mechanical properties of PLLA.

    PubMed

    Renouf-Glauser, Annette C; Rose, John; Farrar, David F; Cameron, Ruth Elizabeth

    2005-10-01

    Poly (l-lactide) is a widely studied biomaterial, currently approved for use in a range of medical devices, however, most in vitro studies have so far focussed upon either the bulk properties during degradation and/or deformation, or on the microstructure of the unloaded material during degradation. This study aimed to combine these approaches through the technique of simultaneous small-angle X-ray scattering and tensile testing at various stages of degradation up to 8 months, on material with a range of induced microstructures. Results showed that the amorphous material deformed by crazing in the dry, wet and degraded states, however, the mechanism by which the craze developed changed significantly on hydration. Despite this difference, there was little change in the bulk mechanical properties. Crystalline materials deformed through crystal-mediated deformation, with contributions from both cavitation and fibrillated shear, but surprisingly, differences in the length scales within the spherulitic structure caused by annealing at different temperatures had very little effect on the mechanism of deformation, though differences were seen in the bulk properties. Furthermore, hydration had little effect on the crystalline materials, though degradation over 8 months resulted in loss of mechanical properties for samples produced at higher annealing temperatures. In conclusion, the introduction of crystallinity had a huge effect on both bulk and microscopic properties of PLLA, but the spherulitic structure of the crystalline material affected the bulk properties significantly more than it did the micromechanism of deformation. PMID:15949544

  5. Aging and mechanical properties of NR/BR blends

    NASA Astrophysics Data System (ADS)

    Chiu, Hsien-Tang; Tsai, Peir-An

    2006-02-01

    The mechanical properties and post-thermal aging properties of natural rubber (NR) and polybutadiene rubber (BR) blends at different blending ratios are investigated herein. The experimental results show that both tensile and tear strengths of NR/BR blends increase with increasing NR content. BR has a higher compression stiffness than NR. The deformation of BR is less than that of NR under the same load conditions. With regard to aging properties, both tensile stress and strain of NR/BR blends decrease after prolonged aging. In addition, the stress loss of BR is lower than that of NR, meaning that the aging resistance property of BR is superior to that of NR. Furthermore, accumulated thermal history has shifted the glass transition temperature (T g) of NR/BR blends toward lower temperatures while the loss tangent (tan δ) value increases with prolonged thermal aging.

  6. The mechanical and tribological properties of UHMWPE loaded ALN after mechanical activation for joint replacements.

    PubMed

    Gong, Kemeng; Qu, Shuxin; Liu, Yumei; Wang, Jing; Zhang, Yongchao; Jiang, Chongxi; Shen, Ru

    2016-08-01

    Ultra-high molecular weight polyethylene (UHMWPE) loaded with alendronate sodium (ALN) has tremendous potential as an orthopeadic biomaterial for joint replacements. However, poor mechanical and tribological properties of UHMWPE-ALN are still obstacle for further application. The purpose of this study was to investigate the effect and mechanism of mechanical activation on mechanical and tribological properties of 1wt% ALN-loaded UHMWPE (UHMWPE-ALN-ma). In this study, tensile test, small punch test and reciprocating sliding wear test were applied to characterize the mechanical and tribological properties of UHMWPE-ALN-ma. Scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and Fourier transform infrared spectroscopy (FTIR) were employed to characterize UHMWPE-ALN-ma. Tensile test and small punch test showed that Young׳s modulus, tensile strength and work-to-failure (WTF) of UHMWPE-ALN-ma increased significantly compared to those of UHMWPE-ALN. The friction coefficients and wear factors of UHMWPE-ALN-ma both decreased significantly compared to those of UHMWPE-ALN. Mechanical activation obviously reduced type 1 (void) and type 2 (the disconnected and dislocated machining marks) fusion defects of UHMWPE-ALN-ma, which were revealed by SEM images of freeze fracture surfaces after etching and lateral surfaces of specimens after extension to fracture, respectively. It was attributed to peeled-off layers and chain scission of molecular chains of UHMWPE particles after mechanical activation, which were revealed by SEM images and FTIR spectra of UHMWPE-ALN-ma and UHMWPE-ALN, respectively. Moreover, EDS spectra revealed the more homogeneous distribution of ALN in UHMWPE-ALN-ma compared to that of UHMWPE-ALN. The present results showed that mechanical activation was a potential strategy to improve mechanical and tribological properties of UHMWPE-ALN-ma as an orthopeadic biomaterial for joint replacements. PMID:27104932

  7. Mechanical properties and microstructure of centrifugally cast alloy 718

    SciTech Connect

    Michel, D.J.; Smith, H.H.

    1985-07-01

    The relationship between the microstructure and mechanical properties of alloy 718 was investigate for two discs centrifugally cast at 50 and 200 rpm and given a duplex age heat treatment. The results of mechanical property tests at temperatures from 426 to 649/sup 0/C showed that the tensile, yield and ultimate strength levels of both castings were similar. However, the creep-rupture properties were considerably enhanced for the casting produced at 200 rpm. Comparison of the radial and transverse creep properties of each disc indicated that creep life was generally independent of orientation, but ductility was greatest for specimens oriented transverse to the radial direction of the casting. Fatigue crack propagation performance was not greatly influenced by orientation or mold speed parameters and is comparable to wrought alloy 718 when compared on the basis of stress intensity factor range. The centrifugal casting process was found to produce a homogeneous microstructure free of porosity but with the expected segregation of solute alloying elements to Laves and carbide phases. The effect of the as-cast microstructure on the mechanical behavior and the potential influence of hot isostatic pressing to improve the microstructure are discussed.

  8. Mechanical properties and microstructure of centrifugally cast alloy 718

    NASA Astrophysics Data System (ADS)

    Michel, D. J.; Smith, H. H.

    1985-07-01

    The relationship between the microstructure and mechanical properties of alloy 718 was investigated for two discs centrifugally cast at 50 and 200 rpm and given a duplex age heat treatment. The results of mechanical property tests at temperatures from 426 to 649 °C showed that the tensile yield and ultimate strength levels of both castings were similar. However, the creep-rupture properties were considerably enhanced for the casting produced at 200 rpm. Comparison of the radial and transverse creep properties of each disc indicated that creep life was generally independent of orientation, but ductility was greatest for specimens oriented transverse to the radial direction of the casting. Fatigue crack propagation performance was not greatly influenced by orientation or mold speed parameters and was comparable to wrought alloy 718 when compared on the basis of stress intensity factor range. The centrifugal casting process was found to produce a homogeneous microstructure free of porosity but with the expected segregation of solute alloying elements to Laves and carbide phases. The effect of the as-cast microstructure on the mechanical behavior and the potential influence of hot isostatic pressing to improve the microstructure are discussed.

  9. Structure-mechanics property relationship of waste derived biochars.

    PubMed

    Das, Oisik; Sarmah, Ajit K; Bhattacharyya, Debes

    2015-12-15

    The widespread applications of biochar in agriculture and environmental remediation made the scientific community ignore its mechanical properties. Hence, to examine the scope of biochar's structural applications, its mechanical properties have been investigated in this paper through nanoindentation technique. Seven waste derived biochars, made under different pyrolysis conditions and from diverse feedstocks, were studied via nanoindentation, infrared spectroscopy, X-ray crystallography, thermogravimetry, and electron microscopy. Following this, an attempt was made to correlate the biochars' hardness/modulus with reaction conditions and their chemical properties. The pine wood biochar made at 900°C and 60min residence time was found to have the highest hardness and elastic modulus of 4.29 and 25.01GPa, respectively. It was shown that a combination of higher heat treatment (≥500°C) temperature and longer residence time (~60min) increases the values of hardness and modulus. It was further realized that pyrolysis temperature was a more dominant factor than residence time in determining the final mechanical properties of biochar particles. The degree of aromaticity and crystallinity of the biochar were also correlated with higher values of hardness and modulus. PMID:26322726

  10. Mechanical properties of several iron-nickel meteorites

    SciTech Connect

    Mulford, Roberta N; El - Dasher, Bassem

    2011-01-06

    Iron-nickel meteorites exhibit a unique lamellar microstructure, consisting of small regions with steep-iron-nickel composition gradients. The microstructure arises as a result of slow cooling in a planetary core or other large mass. The microstructure is further influenced by variable concentrations of other elements such as phosphorous which may have influenced cooling and phase separation. Mechanical properties of these composite structures have been investigated using Vickers and spherical indentation, x-ray fluorescence, and EBSD. Direct observation of mechanical properties in these highly structured materials provides a valuable supplement to bulk measurements, which frequently exhibit large variation in dynamic properties, even within a single sample. Previous studies of the mechanical properties of a typical iron-nickel meteorite, a Diablo Canyon specimen, indicated that the strength of the composite was higher by almost an order of magnitude than values obtained from laboratory-prepared specimens. This was ascribed to the extreme work-hardening evident in the EBSD measurements. Additional specimens from the Canyon Diablo fall (type IAB, coarse octahedrite) and several fine octahedrite meteorites, from the Muonionalusta meteorite (IVA) and Gibeon fall (IVA), have been examined to establish a range of error on the previously measured yield, to determine the extent to which deformation upon reentry contributes to yield, and to establish the degree to which the strength varies as a function of microstructure.

  11. Evolution of mechanical properties in ErT2 films.

    SciTech Connect

    Browning, James Frederick; Bond, Gillian Mary; Knapp, James Arthur

    2010-04-01

    The mechanical properties of rare earth tritide films evolve as tritium decays into {sup 3}He, which forms bubbles that influence long-term film stability in applications such as neutron generators. Ultralow load nanoindentation, combined with finite-element modeling to separate the mechanical properties of the thin films from their substrates, has been used to follow the mechanical properties of model ErT{sub 2} films as they aged. The size of the growing {sup 3}He bubbles was followed with transmission electron microscopy, while ion beam analysis was used to monitor total T and {sup 3}He content. The observed behavior is divided into two regimes: a substantial increase in layer hardness but elasticity changed little over {approx}18 months, followed by a decrease in elastic stiffness and a modest decease in hardness over the final 24 months. We show that the evolution of properties is explained by a combination of dislocation pinning by the bubbles, elastic softening as the bubbles occupy an increasing fraction of the material, and details of bubble growth modes.

  12. Mechanical properties of carbon nanotube ropes with hierarchical helical structures

    NASA Astrophysics Data System (ADS)

    Zhao, Zi-Long; Zhao, Hong-Ping; Wang, Jian-Shan; Zhang, Zhong; Feng, Xi-Qiao

    2014-11-01

    Hierarchical helical structures widely exist in both artificial and biological materials. Such nanomaterials as carbon nanotube ropes with hierarchical helical structures hold a promise for potential applications, for instance, in aerospace and medical engineering. In the present paper, a bottom-up theoretical model is established to investigate the mechanical properties of this kind of novel nanomaterials. The geometry of a rope with a hierarchy of chirality is first formulated. On the basis of the analysis of the internal forces and deformations of a single helical ply, a theoretical model is provided to predict the mechanical responses of multi-level helical materials. The effect of hierarchical helical structures is revealed by comparing the properties between a carbon nanotube rope with two-level helical structure and its counterpart bundle consisting of straight carbon nanotubes. The dependence of the mechanical properties of materials on the initial helical angles, fiber numbers, and handednesses at different structural levels are examined. Carbon nanotube ropes are found with higher deformation ability and elastic property which can be easily tuned via their microstructural parameters. This work helps understand the behavior of chiral materials and also provides inspirations for optimal design of advanced nanomaterials with hierarchical helical structures.

  13. Mechanical Properties of Nanostructured Materials Determined Through Molecular Modeling Techniques

    NASA Technical Reports Server (NTRS)

    Clancy, Thomas C.; Gates, Thomas S.

    2005-01-01

    The potential for gains in material properties over conventional materials has motivated an effort to develop novel nanostructured materials for aerospace applications. These novel materials typically consist of a polymer matrix reinforced with particles on the nanometer length scale. In this study, molecular modeling is used to construct fully atomistic models of a carbon nanotube embedded in an epoxy polymer matrix. Functionalization of the nanotube which consists of the introduction of direct chemical bonding between the polymer matrix and the nanotube, hence providing a load transfer mechanism, is systematically varied. The relative effectiveness of functionalization in a nanostructured material may depend on a variety of factors related to the details of the chemical bonding and the polymer structure at the nanotube-polymer interface. The objective of this modeling is to determine what influence the details of functionalization of the carbon nanotube with the polymer matrix has on the resulting mechanical properties. By considering a range of degree of functionalization, the structure-property relationships of these materials is examined and mechanical properties of these models are calculated using standard techniques.

  14. Woven glass fabric reinforced laminates based on polyolefin wastes: Thermal, mechanical and dynamic-mechanical properties

    NASA Astrophysics Data System (ADS)

    Russo, Pietro; Acierno, Domenico; Simeoli, Giorgio; Lopresto, Valentina

    2014-05-01

    Potentialities of polyolefin wastes in place of virgin polypropylene to produce composite laminates have been investigated. Plaques reinforced with a woven glass fabric were prepared by film-stacking technique and systematically analyzed in terms of thermal, mechanical and dynamic-mechanical properties. In case of PP matrices, the use of a typical compatibilizer to improve the adhesion at the interface has been considered. Thermal properties emphasized the chemical nature of plastic wastes. About mechanical properties, static tests showed an increase of flexural parameters for compatibilized systems due to the coupling effect between grafted maleic anhydride and silane groups on the surface of the glass fabric. These effects, maximized for composites based on car bumper wastes, is perfectly reflected in terms of storage modulus and damping ability of products as determined by single-cantilever bending dynamic tests.

  15. Mechanical properties of Municipal Solid Waste by SDMT

    SciTech Connect

    Castelli, Francesco; Maugeri, Michele

    2014-02-15

    Highlights: • The adoption of the SDMT for the measurements of MSW properties is proposed. • A comparison between SDMT results and laboratory tests was carried out. • A good reliability has been found in deriving waste properties by SDMT. • Results seems to be promising for the friction angle and Young’s modulus evaluation. - Abstract: In the paper the results of a geotechnical investigation carried on Municipal Solid Waste (MSW) materials retrieved from the “Cozzo Vuturo” landfill in the Enna area (Sicily, Italy) are reported and analyzed. Mechanical properties were determined both by in situ and laboratory large-scale one dimensional compression tests. While among in situ tests, Dilatomer Marchetti Tests (DMT) is used widely in measuring soil properties, the adoption of the DMT for the measurements of MSW properties has not often been documented in literature. To validate its applicability for the estimation of MSW properties, a comparison between the seismic dilatometer (SDMT) results and the waste properties evaluated by laboratory tests was carried out. Parameters for “fresh” and “degraded waste” have been evaluated. These preliminary results seems to be promising as concerns the assessment of the friction angle of waste and the evaluation of the S-wave in terms of shear wave velocity. Further studies are certainly required to obtain more representative values of the elastic parameters according to the SDMT measurements.

  16. Factors affecting mechanical properties of biomass pellet from compost.

    PubMed

    Zafari, A; Kianmehr, M H

    2014-01-01

    Effectiveness of a densification process to create strong and durable bonding in pellets can be determined by testing the mechanical properties such as compressive strength (CS) and durability. Mechanical properties of pellet from composted municipal solid waste were determined at different raw material and densification conditions. Ground compost samples were compressed with three levels of moisture content (35%, 40% and 45% (wb)), piston compaction speed (2, 6 and 10 mm/s), die length (8, 10 and 12mm) and raw material particle size (0.3, 0.9 and 1.5mm) into cylindrical pellets utilizing opened-end dies under axial stress from a vertical piston applied by a hydraulic press. The effects of independent variables on mechanical properties were determined using response surface methodology based on Box-Behnken design (BBD). All independent variables affected the durability significantly. However, different piston speed and die length not produce any significant difference on CS of pellets. Also in this research the electron photography method was used to identify the binding mechanism of compost particles. PMID:24600888

  17. Mechanical properties of murine and porcine ocular tissues in compression.

    PubMed

    Worthington, Kristan S; Wiley, Luke A; Bartlett, Alexandra M; Stone, Edwin M; Mullins, Robert F; Salem, Aliasger K; Guymon, C Allan; Tucker, Budd A

    2014-04-01

    Sub-retinal implantation of foreign materials is becoming an increasingly common feature of novel therapies for retinal dysfunction. The ultimate compatibility of implants depends not only on their in vitro chemical compatibility, but also on how well the mechanical properties of the material match those of the native tissue. In order to optimize the mechanical properties of retinal implants, the mechanical properties of the mammalian retina itself must be carefully characterized. In this study, the compressive moduli of eye tissues, especially the retina, were probed using a dynamic mechanical analysis instrument in static mode. The retinal compressive modulus was lower than that of the sclera or cornea, but higher than that of the RPE and choroid. Compressive modulus remained relatively stable with age. Conversely, apparent retinal softening occurred at an early age in mice with inherited retinal degeneration. Compressive modulus is an important consideration for the design of retinal implants. Polymer scaffolds with moduli that are substantially different than that of the native tissue in which they will ultimately reside will be less likely to aid in the differentiation and development of the appropriate cell types in vitro and will have reduced biocompatibility in vivo. PMID:24613781

  18. Loops determine the mechanical properties of mitotic chromosomes

    NASA Astrophysics Data System (ADS)

    Zhang, Yang; Heermann, Dieter W.

    2013-03-01

    In mitosis, chromosomes undergo a condensation into highly compacted, rod-like objects. Many models have been put forward for the higher-order organization of mitotic chromosomes including radial loop and hierarchical folding models. Additionally, mechanical properties of mitotic chromosomes under different conditions were measured. However, the internal organization of mitotic chromosomes still remains unclear. Here we present a polymer model for mitotic chromosomes and show how chromatin loops play a major role for their mechanical properties. The key assumption of the model is the ability of the chromatin fibre to dynamically form loops with the help of binding proteins. Our results show that looping leads to a tight compaction and significantly increases the bending rigidity of chromosomes. Moreover, our qualitative prediction of the force elongation behaviour is close to experimental findings. This indicates that the internal structure of mitotic chromosomes is based on self-organization of the chromatin fibre. We also demonstrate how number and size of loops have a strong influence on the mechanical properties. We suggest that changes in the mechanical characteristics of chromosomes can be explained by an altered internal loop structure. YZ gratefully appreciates funding by the German National Academic Foundation (Studienstiftung des deutschen Volkes) and support by the Heidelberg Graduate School for Mathematical and Computational Methods in the Sciences (HGS MathComp).

  19. Mechanical Properties of Nanoworm Assembled by DNA and Nanoparticle Conjugates.

    PubMed

    Zhou, Yihua; Sohrabi, Salman; Tan, Jifu; Liu, Yaling

    2016-06-01

    Recently, DNA-nanoparticle conjugates have been widely used as building blocks for assembling complex nanostructures, due to their programmable recognitions, high cellular uptake and enhanced binding capabilities. In this study, a nanoworm structure, which can be applied in fields of drug targeting, image probing and thermal therapies, has been assembled by DNA-nanoparticle conjugates. Subsequently, its mechanical properties have been investigated due to their importance on the structural stability, transport and circulations of the nanoworm. Stiffness and strengths of the nanoworm under different deformation types are studied by coarse-grained molecular dynamics simulations. Effects of temperature, DNA coating density and particle size on mechanical properties of nanoworms are also thoroughly investigated. Results show that both resistance and strength of the nanoworm are the weakest along the axial direction, indicating it is more prone to be ruptured by a stretching force. i addition, DNA strands are found to be more important than nanoparticles in determining mechanical properties of the nanoworm. Moreover, both strength and resistance in regardless of directions are proved to be enhanced by decreasing the temperature, raising the DNA coating density and enlarging the particle size. This study is capable of serving as guidance for designing nanoworms with optimal mechanical strengths for applications. PMID:27427583

  20. Mechanical properties of single electrospun drug-encapsulated nanofibres

    NASA Astrophysics Data System (ADS)

    Yian Chew, Sing; Hufnagel, Todd C.; Teck Lim, Chwee; Leong, Kam W.

    2006-08-01

    The mechanical and structural properties of a surface play an important role in determining the morphology of attached cells, and ultimately their cellular functions. As such, mechanical and structural integrity are important design parameters for a tissue scaffold. Electrospun fibrous meshes are widely used in tissue engineering. When in contact with electrospun scaffolds, cells see the individual micro- or nanofibres as their immediate microenvironment. In this study, tensile testing of single electrospun nanofibres composed of poly(ɛ-caprolactone) (PCL), and its copolymer, poly(caprolactone-co-ethyl ethylene phosphate) (PCLEEP), revealed a size effect in the Young's modulus, E, and tensile strength, σT. Both strength and stiffness increase as the fibre diameter decreases from bulk (~5 µm) into the nanometre region (200 300 nm). In particular, E and σT of individual PCL nanofibres were at least two-fold and an order of magnitude higher than that of PCL film, respectively. PCL films were observed to have more pronounced crystallographic texture than the nanofibres; however no difference in crystalline fraction, perfection, or texture was detected among the various fibres. When drugs were encapsulated into single PCLEEP fibres, mechanical properties were enhanced with 1 20 wt% of loaded retinoic acid, but weakened by 10 20 wt% of encapsulated bovine serum albumin. This understanding of the effect of size and drug and protein encapsulation on the mechanical properties of electrospun fibres may help in the optimization of tissue scaffold design that combines biochemical and biomechanical cues for tissue regeneration.

  1. Mechanical properties of fibroblasts depend on level of cancer transformation.

    PubMed

    Efremov, Yu M; Lomakina, M E; Bagrov, D V; Makhnovskiy, P I; Alexandrova, A Y; Kirpichnikov, M P; Shaitan, K V

    2014-05-01

    Recently, it was revealed that tumor cells are significantly softer than normal cells. Although this phenomenon is well known, it is connected with many questions which are still unanswered. Among these questions are the molecular mechanisms which cause the change in stiffness and the correlation between cell mechanical properties and their metastatic potential. We studied mechanical properties of cells with different levels of cancer transformation. Transformed cells in three systems with different transformation types (monooncogenic N-RAS, viral and cells of tumor origin) were characterized according to their morphology, actin cytoskeleton and focal adhesion organization. Transformation led to reduction of cell spreading and thus decreasing the cell area, disorganization of actin cytoskeleton, lack of actin stress fibers and decline in the number and size of focal adhesions. These alterations manifested in a varying degree depending on type of transformation. Force spectroscopy by atomic force microscopy with spherical probes was carried out to measure the Young's modulus of cells. In all cases the Young's moduli were fitted well by log-normal distribution. All the transformed cell lines were found to be 40-80% softer than the corresponding normal ones. For the cell system with a low level of transformation the difference in stiffness was less pronounced than for the two other systems. This suggests that cell mechanical properties change upon transformation, and acquisition of invasive capabilities is accompanied by significant softening. PMID:24530505

  2. Mechanical properties of orbital fat and its encapsulating connective tissue.

    PubMed

    Chen, Kinon; Weiland, James D

    2011-06-01

    There is an increasing need to understand the mechanical properties of human orbital fat and its encapsulating connective tissue (OFCT), but such knowledge is not available in the current literature. The purpose of the present study is to examine the mechanical properties of the OFCT. From 5 pairs of 76- to 92-year-old Caucasian human eyes and 33 5- to 7-month-old porcine eyes, 5 human and 11 porcine OFCT samples were dissected at the posterior pole or adjacent to the pole in the vertical, horizontal, and radial directions. Sample dimensions were fixed or measured. Tensile tests were performed on the samples in body-temperature saline. The stress-strain relationship was first approximately linear and then became nonlinear. The linear, the neo-Hookean, and the Mooney-Rivlin constants are reported in Tables 1 and 2. No statistical difference was found among their properties in the different directions in either the human or the porcine samples. Statistical differences were found between the human and the porcine material constants in the horizontal and radial directions. Among our material models, only the Mooney-Rivlin model was able to capture the mechanical properties of the OFCT in large deformation properly. The Mooney-Rivlin model was especially adaptive to the human data. This is the first time the mechanical properties of the human and porcine OFCT have been examined in the literature. We believe our data will provide valuable information to others regarding designing implant biomaterials in orbital treatments and developing computer models to study orbital biomechanics. PMID:21744934

  3. Characterization of the mechanical properties of freestanding platinum thin films

    NASA Astrophysics Data System (ADS)

    Abbas, Khawar

    Many MEMS devices utilize nanocrystalline thin metallic films as mechanical structures, in particular, micro switching devices where these films are used as Ohmic contacts. But the elastic and plastic properties of these thin films (thickness < 1mum) are significantly different from those of the bulk material. At these scales the volume fraction of material defects such as: grain boundaries, dislocations and interstitials become quite significant and become a chief contributor to the physical and mechanical material properties. In order to effectively design MEMS devices it is important that these material properties are explored and mechanical behavior of the structure they form be characterized. Popular thin film materials used in MEMS devices are Aluminum (Al), Copper (Cu), Nickel (Ni) and Gold (Au). Platinum has traditionally gained acceptance into the MEMS industry because of its chemical inertness and high temperature stability. However the mechanical properties of platinum remains the least exploited. Platinum has a high Young's Modulus (164 GPa, for bulk) and high melting temperature (1768 °C) and therefore can be used as a 'thin film' structure (cantilever, a bridge or a membrane) in high temperature environments with high resistance to mechanical failure. The physical size of these thin film structure make it very difficult to handle them and employ traditional mechanical testing methodologies and techniques and therefore require custom test platforms. One such recently developed platform is presented in this dissertation. The test platform is comprised of a microfabricated cascaded thermal actuator system and test specimen. The cascaded thermal actuator system is capable of providing tens of microns of displacement and tens of milli-Newton forces simultaneously while applying a relatively low temperature gradient across the test specimen. The dimensions of the platform make its use possible in both the SEM/TEM environments and on a probe station under

  4. Mechanical and tribological properties of ion beam-processed surfaces

    SciTech Connect

    Kodali, P.

    1998-01-01

    The intent of this work was to broaden the applications of well-established surface modification techniques and to elucidate the various wear mechanisms that occur in sliding contact of ion-beam processed surfaces. The investigation included characterization and evaluation of coatings and modified surfaces synthesized by three surface engineering methods; namely, beam-line ion implantation, plasma-source ion implantation, and DC magnetron sputtering. Correlation among measured properties such as surface hardness, fracture toughness, and wear behavior was also examined. This dissertation focused on the following areas of research: (1) investigating the mechanical and tribological properties of mixed implantation of carbon and nitrogen into single crystal silicon by beam-line implantation; (2) characterizing the mechanical and tribological properties of diamond-like carbon (DLC) coatings processed by plasma source ion implantation; and (3) developing and evaluating metastable boron-carbon-nitrogen (BCN) compound coatings for mechanical and tribological properties. The surface hardness of a mixed carbon-nitrogen implant sample improved significantly compared to the unimplanted sample. However, the enhancement in the wear factor of this sample was found to be less significant than carbon-implanted samples. The presence of nitrogen might be responsible for the degraded wear behavior since nitrogen-implantation alone resulted in no improvement in the wear factor. DLC coatings have low friction, low wear factor, and high hardness. The fracture toughness of DLC coatings has been estimated for the first time. The wear mechanism in DLC coatings investigated with a ruby slider under a contact stress of 1 GPa was determined to be plastic deformation. The preliminary data on metastable BCN compound coatings indicated high friction, low wear factor, and high hardness.

  5. Micro-mechanical properties of bio-materials

    NASA Astrophysics Data System (ADS)

    Zakiev, V.; Markovsky, A.; Aznakayev, E.; Zakiev, I.; Gursky, E.

    2005-09-01

    Investigation of physical-mechanical characteristics of stomatologic materials (ceramics for crowns, silver amalgam, cements and materials on a polymeric basis) properties by the modern methods and correspondence their physical-mechanical properties to the physical-mechanical properties of native teeth is represented. The universal device "Micron-Gamma" is built for this purpose. This device allows investigate the physical-mechanical characteristics of stomatologic materials (an elastic modulus, micro-hardness, destruction energy, resistance to scratching) by the methods of continuous indentation, scanning and pricking. A new effective method as well as its device application for the investigation of surface layers of materials and their physical-mechanical properties by means of the constant indenting of an indenter is realized. This method is based on the automatic registration of loading (P) on the indenter with the simultaneous measurement of its indentation depth (h). The results of investigations are presented on a loading diagram P=f(h) and as a digital imaging on the PC. This diagram allows get not only more diverse characteristics in the real time regime but also gives new information about the stomatologic material properties. Therefore, we can to investigate the wide range of the physical-mechanical properties of stomatologic materials. "Micron-alpha" is digital detection device for light imaging applications. It enables to detect the very low material surface relief heights and restoration of surface micro topography by a sequence data processing of interferential data of partially coherent light also. "Micron-alpha" allows: to build 2D and 3D imaging of a material surface; to estimate the quantitatively characteristics of a material surface; to observe the imaging interferential pictures both in the white and in the monochromatic light; to carry out the investigation of blood cells, microbes and biological macromolecules profiles. The method allows

  6. Brain mechanical property measurement using MRE with intrinsic activation

    NASA Astrophysics Data System (ADS)

    Weaver, John B.; Pattison, Adam J.; McGarry, Matthew D.; Perreard, Irina M.; Swienckowski, Jessica G.; Eskey, Clifford J.; Lollis, S. Scott; Paulsen, Keith D.

    2012-11-01

    Many pathologies alter the mechanical properties of tissue. Magnetic resonance elastography (MRE) has been developed to noninvasively characterize these quantities in vivo. Typically, small vibrations are induced in the tissue of interest with an external mechanical actuator. The resulting displacements are measured with phase contrast sequences and are then used to estimate the underlying mechanical property distribution. Several MRE studies have quantified brain tissue properties. However, the cranium and meninges, especially the dura, are very effective at damping externally applied vibrations from penetrating deeply into the brain. Here, we report a method, termed ‘intrinsic activation’, that eliminates the requirement for external vibrations by measuring the motion generated by natural blood vessel pulsation. A retrospectively gated phase contrast MR angiography sequence was used to record the tissue velocity at eight phases of the cardiac cycle. The velocities were numerically integrated via the Fourier transform to produce the harmonic displacements at each position within the brain. The displacements were then reconstructed into images of the shear modulus based on both linear elastic and poroelastic models. The mechanical properties produced fall within the range of brain tissue estimates reported in the literature and, equally important, the technique yielded highly reproducible results. The mean shear modulus was 8.1 kPa for linear elastic reconstructions and 2.4 kPa for poroelastic reconstructions where fluid pressure carries a portion of the stress. Gross structures of the brain were visualized, particularly in the poroelastic reconstructions. Intra-subject variability was significantly less than the inter-subject variability in a study of six asymptomatic individuals. Further, larger changes in mechanical properties were observed in individuals when examined over time than when the MRE procedures were repeated on the same day. Cardiac pulsation

  7. Brain Mechanical Property Measurement Using MRE with Intrinsic Activation

    PubMed Central

    Pattison, Adam J.; McGarry, Matthew D.; Perreard, Irina M.; Swienckowski, Jessica G.; Eskey, Clifford J.; Lollis, S. Scott; Paulsen, Keith D.

    2013-01-01

    Problem Addressed Many pathologies alter the mechanical properties of tissue. Magnetic resonance elastography (MRE) has been developed to noninvasively characterize these quantities in vivo. Typically, small vibrations are induced in the tissue of interest with an external mechanical actuator. The resulting displacements are measured with phase contrast sequences and are then used to estimate the underlying mechanical property distribution. Several MRE studies have quantified brain tissue properties. However, the cranium and meninges, especially the dura, are very effective at damping externally applied vibrations from penetrating deeply into the brain. Here, we report a method, termed ‘intrinsic activation’, that eliminates the requirement for external vibrations by measuring the motion generated by natural blood vessel pulsation. Methodology A retrospectively gated phase contrast MR angiography sequence was used to record the tissue velocity at eight phases of the cardiac cycle. The velocities were numerically integrated via the Fourier transform to produce the harmonic displacements at each position within the brain. The displacements were then reconstructed into images of the shear modulus based on both linear elastic and poroelastic models. Results, Significance and Potential Impact The mechanical properties produced fall within the range of brain tissue estimates reported in the literature and, equally important, the technique yielded highly reproducible results. The mean shear modulus was 8.1 kPa for linear elastic reconstructions and 2.4 kPa for poroelastic reconstructions where fluid pressure carries a portion of the stress. Gross structures of the brain were visualized, particularly in the poroelastic reconstructions. Intra-subject variability was significantly less than the inter-subject variability in a study of 6 asymptomatic individuals. Further, larger changes in mechanical properties were observed in individuals when examined over time than when

  8. Constitutive Modeling of the Mechanical Properties of Optical Fibers

    NASA Technical Reports Server (NTRS)

    Moeti, L.; Moghazy, S.; Veazie, D.; Cuddihy, E.

    1998-01-01

    Micromechanical modeling of the composite mechanical properties of optical fibers was conducted. Good agreement was obtained between the values of Young's modulus obtained by micromechanics modeling and those determined experimentally for a single mode optical fiber where the wave guide and the jacket are physically coupled. The modeling was also attempted on a polarization-maintaining optical fiber (PANDA) where the wave guide and the jacket are physically decoupled, and found not to applicable since the modeling required perfect bonding at the interface. The modeling utilized constituent physical properties such as the Young's modulus, Poisson's ratio, and shear modulus to establish bounds on the macroscopic behavior of the fiber.

  9. Study of mechanical properties of nanomaterials under high pressure

    NASA Astrophysics Data System (ADS)

    Sharma, Jyoti; Kaur, Namrat; Srivastava, A. K.

    2015-08-01

    In the present work, the study of physical properties and behaviour of nanomaterials i.e. n-γ- Al2O3and n-Si3C4 under high pressure is done. For this purpose Murnaghan equation of state is used. The applicability of Murnaghan equation of state is fully tested by calculating mechanical properties of nano materials i.e. volume compression (V/Vo), bulk modulus (KT) and relative isothermal compression coefficient (α(P)/α0) at different pressures. The present calculated values of compression curve for the cited nanomaterials come out to be in reasonable good agreement with the available experimental data.

  10. The Structure, Functions, and Mechanical Properties of Keratin

    NASA Astrophysics Data System (ADS)

    McKittrick, J.; Chen, P.-Y.; Bodde, S. G.; Yang, W.; Novitskaya, E. E.; Meyers, M. A.

    2012-04-01

    Keratin is one of the most important structural proteins in nature and is widely found in the integument in vertebrates. It is classified into two types: α-helices and β-pleated sheets. Keratinized materials can be considered as fiber-reinforced composites consisting of crystalline intermediate filaments embedded in an amorphous protein matrix. They have a wide variety of morphologies and properties depending on different functions. Here, we review selected keratin-based materials, such as skin, hair, wool, quill, horn, hoof, feather, and beak, focusing on the structure-mechanical property-function relationships and finally give some insights on bioinspired composite design based on keratinized materials.

  11. Workability and mechanical properties of alkali activated slag concrete

    SciTech Connect

    Collins, F.G.; Sanjayan, J.G.

    1999-03-01

    This paper reports the results of an investigation on concrete containing alkali activated slag (AAS) as the binder, with emphasis on achievement of reasonable workability and equivalent one-day strength to portland cement concrete at normal curing temperatures. Two types of activators were used: sodium hydroxide in combination with sodium carbonate and sodium silicate in combination with hydrated lime. The fresh concrete properties reported include slump and slump loss, air content, and bleed. Mechanical properties of AAS concrete, including compressive strength, elastic modulus, flexural strength, drying shrinkage, and creep are contrasted with those of portland cement concrete.

  12. Concepts and techniques for ultrasonic evaluation of material mechanical properties

    NASA Technical Reports Server (NTRS)

    Vary, A.

    1980-01-01

    The ultrasonic nondestructive evaluation techniques discussed in the present paper indicate potentials for material characterization and property prediction. Stress wave interaction and material transfer function concepts are examined as a basis for explaining correlations between material mechanical behavior and ultrasonically measured quantities. It is observed that the effect and criticality of any discrete flaw, such as crack, inclusion, or any other stress raiser, is definable only in terms of its material microstructural environment. This underscores the importance of ultrasonic techniques capable of characterizing the stress wave energy transfer properties of a material.

  13. Simplified composite micromechanics equations for hygral, thermal and mechanical properties

    NASA Technical Reports Server (NTRS)

    Chamis, C. C.

    1983-01-01

    A unified set of composite micromechanics equations of simple form is summarized and described. This unified set can be used to predict unidirectional composite (ply) geometric, mechanical, thermal and hygral properties using constituent material (fiber/matrix) properties. This unified set also includes approximate equations for predicting (1) moisture absorption; (2) glass transition temperature of wet resins; and (3) hygrothermal degradation effects. Several numerical examples are worked-out to illustrate ease of use and versatility of these equations. These numerical examples also demonstrate the interrelationship of the various factors (geometric to environmental) and help provide insight into composite behavior at the micromechanistic level.

  14. Simplified composite micromechanics equations of hygral, thermal, and mechanical properties

    NASA Technical Reports Server (NTRS)

    Chamis, C. C.

    1984-01-01

    A unified set of composite micromechanics equations of simple form is summarized and described. This unified set can be used to predict unidirectional composite (ply) geometric, mechanical, thermal and hygral properties using constituent material (fiber/matrix) properties. This unified set also includes approximate equations for predicting (1) moisture absorption; (2) glass transition temperature of wet resins; and (3) hygrothermal degradation effects. Several numerical examples are worked-out to illustrate ease of use and versatility of these equations. These numerical examples also demonstrate the interrelationship of the various factors (geometric to environmental) and help provide insight into composite behavior at the micromechanistic level.

  15. Mixed 2D molecular systems: Mechanic, thermodynamic and dielectric properties

    NASA Astrophysics Data System (ADS)

    Beňo, Juraj; Weis, Martin; Dobročka, Edmund; Haško, Daniel

    2008-08-01

    Study of Langmuir monolayers consisting of stearic acid (SA) and dipalmitoylphosphatidylcholine (DPPC) molecules was done by surface pressure-area isotherms ( π- A), the Maxwell displacement current (MDC) measurement, X-ray reflectivity (XRR) and atomic force microscopy (AFM) to investigate the selected mechanic, thermodynamic and dielectric properties based on orientational structure of monolayers. On the base of π- A isotherms analysis we explain the creation of stable structures and found optimal monolayer composition. The dielectric properties represented by MDC generated monolayers were analyzed in terms of excess dipole moment, proposing the effect of dipole-dipole interaction. XRR and AFM results illustrate deposited film structure and molecular ordering.

  16. Metallurgical Mechanisms Controlling Mechanical Properties of Aluminum Alloy 2219 Produced By Electron Beam Freeform Fabrication

    NASA Technical Reports Server (NTRS)

    Domack, Marcia S.; Taminger, Karen M. B.; Begley, Matthew

    2006-01-01

    The electron beam freeform fabrication (EBF3) layer-additive manufacturing process has been developed to directly fabricate complex geometry components. EBF3 introduces metal wire into a molten pool created on the surface of a substrate by a focused electron beam. Part geometry is achieved by translating the substrate with respect to the beam to build the part one layer at a time. Tensile properties have been demonstrated for electron beam deposited aluminum and titanium alloys that are comparable to wrought products, although the microstructures of the deposits exhibit features more typical of cast material. Understanding the metallurgical mechanisms controlling mechanical properties is essential to maximizing application of the EBF3 process. In the current study, mechanical properties and resulting microstructures were examined for aluminum alloy 2219 fabricated over a range of EBF3 process variables. Material performance was evaluated based on tensile properties and results were compared with properties of Al 2219 wrought products. Unique microstructures were observed within the deposited layers and at interlayer boundaries, which varied within the deposit height due to microstructural evolution associated with the complex thermal history experienced during subsequent layer deposition. Microstructures exhibited irregularly shaped grains, typically with interior dendritic structures, which were described based on overall grain size, morphology, distribution, and dendrite spacing, and were correlated with deposition parameters. Fracture features were compared with microstructural elements to define fracture paths and aid in definition of basic processing-microstructure-property correlations.

  17. Protein Fibrillar Nanopolymers: Molecular-Level Insights into Their Structural, Physical and Mechanical Properties

    NASA Astrophysics Data System (ADS)

    Trusova, Valeriya M.

    2015-09-01

    Amyloid fibrils represent a generic class of mechanically strong and stable biomaterials with extremely advantageous properties. Although amyloids were initially associated only with severe neurological disorders, the role of these structures nowadays is shifting from health debilitating to highly beneficial both in biomedical and technological aspects. Intensive involvement of fibrillar assemblies into the wide range of pathogenic and functional processes strongly necessitate the molecular level characterization of the structural, physical and elastic features of protein nanofibrils. In the present contribution, we made an attempt to highlight the up-to-date progress in the understanding of amyloid properties from the polymer physics standpoint. The fundamental insights into protein fibril behavior are essential not only for development of therapeutic strategies to combat the protein misfolding disorders but also for rational and precise design of novel biodegradable protein-based nanopolymers.

  18. Material properties and fracture mechanics in relation to ceramic machining

    SciTech Connect

    Griffith, L.V.

    1993-12-02

    Material removal rate, surface finish, and subsurface damage are largely governed by fracture mechanics and plastic deformation, when ceramics are machined using abrasive methods. A great deal of work was published on the fracture mechanics of ceramics in the late 1970s and early 1980s, although this work has never resulted in a comprehensive model of the fixed abrasive grinding process. However, a recently published model describes many of the most important features of the loose abrasive machining process, for example depth of damage, surface roughness, and material removal rate. Many of the relations in the loose abrasive machining model can be readily discerned from fracture mechanics models, in terms of material properties. By understanding the mechanisms of material removal, from a material properties perspective, we can better estimate how one material will machine in relation to another. Although the fracture mechanics models may have been developed for loose abrasive machining, the principles of crack initiation and propagation are equally valuable for fixed abrasive machining. This report provides a brief review of fracture in brittle materials, the stress distribution induced by abrasives, critical indenter loads, the extension of cracks, and the relation of the fracture process to material removal.

  19. Evaluation of the compressive mechanical properties of endoluminal metal stents.

    PubMed

    Schrader, S C; Beyar, R

    1998-06-01

    The mechanical properties of metal stents are important parameters in the consideration of stent design, matched to resist arterial recoil and vascular spasm. The purpose of this study was to develop a system for a standardized quantitative evaluation of the mechanical characteristics of various coronary stents. Several types of stents were compressed by external hydrostatic pressure. The stent diameter was assessed by placing a pair of small ultrasonic sono-crystals on the stent. From pressure-strain diagrams the ultimate strength and radial stiffness for each stent were determined. For all stents, except the MICRO-II and the Wiktor stent, the diameter decreased homogeneously until an ultimate compressive strength was exceeded, causing an abrupt collapse. Expanded to 3 mm, the mechanical behavior of the beStent, the Crown and the Palmaz-Schatz stent (PS153-series) were comparable. The spiral articulated Palmaz-Schatz stent showed twice the strength (1.26 atm) of the PS-153 (0.65 atm). The NIR stent yielded a maximum strength of 1.05 atm. The MICRO-II and the Wiktor stent did not collapse abruptly but rather showed a continuous decline of diameter with increasing external pressure. The Cardiocoil stent behaved in a fully elastic manner and showed the largest radial stiffness. Difference in mechanical properties between stents were documented using a new device specifically developed for that purpose. These mechanical stent parameters may have important clinical implications. PMID:9637441

  20. Mechanical properties testing and results for thermal barrier coatings

    NASA Astrophysics Data System (ADS)

    Cruse, T. A.; Johnsen, B. P.; Nagy, A.

    1997-03-01

    Mechanical test data for thermal barrier coatings, including modulus, static strength, and fatigue strength data, are reviewed in support of the development of durability models for heat engine applica-tions. The materials include 7 and 8 wt % yttria partially stabilized zirconia (PSZ) as well as a cermet ma-terial (PSZ +10 wt % NiCoCrAlY). Both air plasma sprayed and electron beam physical vapor deposited coatings were tested. The data indicate the basic trends in the mechanical properties of the coatings over a wide range of isothermal conditions. Some of the trends are correlated with material density.

  1. Structure and mechanical properties of liquid crystalline filaments

    SciTech Connect

    Eremin, Alexey; Nemes, Alexandru; Stannarius, Ralf; Schulz, Mario; Nadasi, Hajnalka; Weissflog, Wolfgang

    2005-03-01

    The formation of stable freely suspended filaments is an interesting peculiarity of some liquid crystal phases. So far, little is known about their structure and stability. Similarly to free-standing smectic films, an internal molecular structure of the mesophase stabilizes these macroscopically well-ordered objects with length to diameter ratios of 10{sup 3} and above. In this paper, we report observations of smectic liquid crystal fibers formed by bent-shaped molecules in different mesophases. Our study, employing several experimental techniques, focuses on mechanical and structural aspects of fiber formation such as internal structure, stability, and mechanical and optical properties.

  2. Mechanical and Tear Properties of Fabric/Film Laminates

    NASA Technical Reports Server (NTRS)

    Said, Magdi A.

    1998-01-01

    Films reinforced with woven fabrics are being considered for the development of a material suitable for long duration scientific balloons under a program managed by the National Aeronautics and Space Administration (NASA). Recently developed woven fabrics provide a relatively high strength to weight ratio compared to standard homogenous films. Woven fabrics also have better crack propagation resistance and rip stop capabilities when compared to homogenous lightweight, high strength polymeric films such as polyester and nylon. If joining is required, such as in the case of scientific balloons, woven fabrics have the advantage over polymeric thin films to utilize traditional textile methods as well as other techniques including hot sealing, adhesion, and ultrasonic means. Woven fabrics, however, lack the barrier properties required for helium filled scientific balloons, therefore lamination with homogenous films is required to provide the gas barrier capabilities required in these applications.

  3. Time-temperature superposition applied to PBX mechanical properties

    NASA Astrophysics Data System (ADS)

    Thompson, Darla; DeLuca, Racci; Wright, Walter J.

    2012-03-01

    The use of plastic-bonded explosives (PBXs) in weapon applications requires that they possess and maintain a level of structural/mechanical integrity. Uniaxial tension and compression experiments are typically used to characterize the mechanical response of materials over a wide range of temperatures and strain rates, providing the basis for predictive modeling in more complex geometries. After many years of data collection on a variety of PBX formulations, we have here applied the principles of time-temperature superposition to a mechanical properties database which includes PBX 9501, PBX 9502, PBXN-110, PBXN-9, and HPP (propellant). Consistencies are demonstrated between the results of quasi-static tension and compression, dynamic Split-Hopkinson Pressure Bar (SHPB) compression, and cantilever Dynamic Mechanical Analysis (DMA). Timetemperature relationships of maximum stress and corresponding strain values are analyzed, in addition to the more conventional analysis of modulus. The extensive analysis shows adherence to the principles of time-temperature superposition and correlations of mechanical response to binder glasstransition temperature (Tg) and specimen density. Direct ties exist between the time-temperature analysis and the underlying basis of a useful existing PBX mechanical model (ViscoSCRAM). Results give confidence that, with some limitations, mechanical response can be predicted at conditions not explicitly measured.

  4. Improved Pharmacological and Structural Properties of HIV Fusion Inhibitor AP3 over Enfuvirtide: Highlighting Advantages of Artificial Peptide Strategy

    SciTech Connect

    Zhu, Xiaojie; Zhu, Yun; Ye, Sheng; Wang, Qian; Xu, Wei; Su, Shan; Sun, Zhiwu; Yu, Fei; Liu, Qi; Wang, Chao; Zhang, Tianhong; Zhang, Zhenqing; Zhang, Xiaoyan; Xu, Jianqing; Du, Lanying; Liu, Keliang; Lu, Lu; Zhang, Rongguang; Jiang, Shibo

    2015-08-19

    Enfuvirtide (T20), is the first HIV fusion inhibitor approved for treatment of HIV/AIDS patients who fail to respond to the current antiretroviral drugs. However, its clinical application is limited because of short half-life, drug resistance and cross-reactivity with the preexisting antibodies in HIV-infected patients. Using an artificial peptide strategy, we designed a peptide with non-native protein sequence, AP3, which exhibited potent antiviral activity against a broad spectrum of HIV-1 strains, including those resistant to T20, and had remarkably longer in vivo half-life than T20. While the preexisting antibodies in HIV-infected patients significantly suppressed T20’s antiviral activity, these antibodies neither recognized AP3, nor attenuated its anti-HIV-1 activity. Structurally different from T20, AP3 could fold into single-helix and interact with gp41 NHR. The two residues, Met and Thr, at the N-terminus of AP3 form a hook-like structure to stabilize interaction between AP3 and NHR helices. Therefore, AP3 has potential for further development as a new HIV fusion inhibitor with improved antiviral efficacy, resistance profile and pharmacological properties over enfuvirtide. Meanwhile, this study highlighted the advantages of artificially designed peptides, and confirmed that this strategy could be used in developing artificial peptide-based viral fusion inhibitors against HIV and other enveloped viruses.

  5. Electrical and dielectric properties of bovine trabecular bone - relationships with mechanical properties and mineral density

    NASA Astrophysics Data System (ADS)

    Sierpowska, J.; Töyräs, J.; Hakulinen, M. A.; Saarakkala, S.; Jurvelin, J. S.; Lappalainen, R.

    2003-03-01

    Interrelationships of trabecular bone electrical and dielectric properties with mechanical characteristics and density are poorly known. While electrical stimulation is used for healing fractures, better understanding of these relations has clinical importance. Furthermore, earlier studies have suggested that bone electrical and dielectric properties depend on the bone density and could, therefore, be used to predict bone strength. To clarify these issues, volumetric bone mineral density (BMDvol), electrical and dielectric as well as mechanical properties were determined from 40 cylindrical plugs of bovine trabecular bone. Phase angle, relative permittivity, loss factor and conductivity of wet bovine trabecular bone were correlated with Young's modulus, yield stress, ultimate strength, resilience and BMDvol. The reproducibility of in vitro electrical and dielectric measurements was excellent (standardized coefficient of variation less than 1%, for all parameters), especially at frequencies higher than 1 kHz. Correlations of electrical and dielectric parameters with the bone mechanical properties or density were frequency-dependent. The relative permittivity showed the strongest linear correlations with mechanical parameters (r > 0.547, p < 0.01, n = 40, at 50 kHz) and with BMDvol (r = 0.866, p < 0.01, n = 40, at 50 kHz). In general, linear correlations between relative permittivity and mechanical properties or BMDvol were highest at frequencies over 6 kHz. In addition, a significant site-dependent variation of electrical and dielectric characteristics, mechanical properties and BMDvol was revealed in bovine femur (p < 0.05, Kruskall-Wallis H-test). Based on the present results, we conclude that the measurement of electrical and dielectric properties provides quantitative information that is related to bone quantity and quality.

  6. Numerical Analysis on the Mechanical Properties of Organic Thin Film Transistor

    NASA Astrophysics Data System (ADS)

    Lee, S. C.; Lee, D. K.; Seol, Y. G.; Ahn, J. H.; Lee, N. E.; Kim, Y. J.

    The organic thin film transistor (OTFT) on flexible substrate electroplated electrodes has many advantages as in the fabrication of low cost sensors, e-paper, smart cards, and flexible displays. In this study, we simulated the mechanical and electrical characteristics of the OTFT with various voltage conditions by using COMSOL. The model consisting of a channel, source and drain was employed to investigate the temperature distribution and thermal stress concentration. The channel length is 40 µm and the voltage ranged between -20V and -40V. The OTFT was fabricated using pentacene as a semiconducting layer and electroplated Ni as a gate electrode. Mechanical properties of the fabricated OTFT were characterized by thermal stress which was predicted with the result of stress distribution.

  7. Quantitative ultrasonic evaluation of mechanical properties of engineering materials

    NASA Technical Reports Server (NTRS)

    Vary, A.

    1978-01-01

    Current progress in the application of ultrasonic techniques to nondestructive measurement of mechanical strength properties of engineering materials is reviewed. Even where conventional NDE techniques have shown that a part is free of overt defects, advanced NDE techniques should be available to confirm the material properties assumed in the part's design. There are many instances where metallic, composite, or ceramic parts may be free of critical defects while still being susceptible to failure under design loads due to inadequate or degraded mechanical strength. This must be considered in any failure prevention scheme that relies on fracture analysis. This review will discuss the availability of ultrasonic methods that can be applied to actual parts to assess their potential susceptibility to failure under design conditions.

  8. Preparation and mechanical properties of chitosan/carbon nanotubes composites.

    PubMed

    Wang, Shao-Feng; Shen, Lu; Zhang, Wei-De; Tong, Yue-Jin

    2005-01-01

    Biopolymer chitosan/multiwalled carbon nanotubes (MWNTs) nanocomposites have been successfully prepared by a simple solution-evaporation method. The morphology and mechanical properties of the chitosan/MWNTs nanocomposites have been characterized with field emission scanning electron microscopy (SEM), bright field transmission electron microscopy (TEM), optical microscopy (OM), wide-angle X-ray diffraction (XRD), and tensile as well as nanoindentation tests. The MWNTs were observed to be homogeneously dispersed throughout the chitosan matrix. When compared with neat chitosan, the mechanical properties, including the tensile modulus and strength, of the nanocomposites are greatly improved by about 93% and 99%, respectively, with incorporation of only 0.8 wt % of MWNTs into the chitosan matrix. PMID:16283728

  9. Superior mechanical properties of FeCrMoVC

    NASA Astrophysics Data System (ADS)

    Kühn, U.; Mattern, N.; Gemming, T.; Siegel, U.; Werniewicz, K.; Eckert, J.

    2007-06-01

    This work presents results on the microstructure and mechanical properties of the steel composition Fe84.3Cr4.3Mo4.6V2.2C4.6 subjected to preparation conditions typically used for manufacturing of bulk metallic glasses. Thermodynamical aspects and kinetic limitations on the specific solidification process of phase formation, particularly those, which are strongly dominated by diffusion controlled mechanisms, promote the formation of nonequilibrium phases, such as martensite and complex carbide structures already in the as-cast state. This combination of high strength phases yields material with highly desirable properties, such as an engineering compression strength of more than 4000MPa surprisingly combined with a fracture strain of about 12%.

  10. Mechanical Properties of Highly Porous NiTi Alloys

    NASA Astrophysics Data System (ADS)

    Bram, Martin; Köhl, Manuel; Buchkremer, Hans Peter; Stöver, Detlev

    2011-07-01

    Highly porous NiTi alloys with pseudoelastic properties are attractive candidates for biomedical implants, energy absorbers, or damping elements. Recently, a new method was developed for net-shape manufacturing of such alloys combining metal injection molding with the application of suitable space-holder materials. A comprehensive study of mechanical properties was conducted on samples with a porosity of 51% and a pore size in the range of 300-500 μm. At low deformations <6%, fully pronounced pseudoelasticity was found. Even at higher strains, a shape recovery of maximum 6% took place, on which the onset of irreversible plastic deformation was superposed. Results of static compression tests were also used to calculate the energy-absorbing capacity. Fatigue of porous NiTi was investigated by cyclic loading up to 230,000 stress reversals. The failure mechanisms responsible for a reduction of shape recovery after an increased number of load cycles are discussed.

  11. [A study of mechanical properties of orthodontic wires in tension].

    PubMed

    Konstantellos, B; Lagoudakis, M; Toutountzakis, N

    1990-12-01

    Orthodontic forces are applied to the teeth basically by means of different types of orthodontic wires. Knowledge of the mechanical properties of such wires are very helpful to the clinician in design and application of optimal force systems during orthodontic treatment. The basic mechanical properties were studied for 17 types of orthodontic wires (all rectangular and of the same size), in tension. Modulus of elasticity (E), yield strength (YS) and maximum elastic strain (Springback) (YS/E) were calculated for each type of wires. Stainless steel wires have demonstrated higher modulus of elasticity (and yield strength) in comparison with wires of nickel-titanium and beta titanium alloys. B-titanium wires showed higher modulus of elasticity than nickel-titanium ones. In addition stainless steel wires were found to have higher values for springback than cobalt-chromium ones and lower values (for the same variable) than nickel-titanium and B-titanium wires. PMID:2129597

  12. Mechanical and hyperthermic properties of magnetic nanocomposites for biomedical applications.

    PubMed

    Kan-Dapaah, Kwabena; Rahbar, Nima; Tahlil, Abdullahi; Crosson, David; Yao, Nan; Soboyejo, Wole

    2015-09-01

    An understanding of the properties of multifunctional materials is important for the design of devices for biomedical applications. In this paper, a combination of experiments and models was used to study the mechanical and hyperthermic properties of magnetic nanoparticles (MNP)-filled PDMS composites for biomedical applications. These are studied as a function of the weight of MNP, γ-Fe2O3. The results showed the effects on mechanical behavior, and specific losses in a magnetic field. The measured Young's moduli are in good agreement with the moduli predicted from the Bergström-Boybce model. Specific losses calculated from magnetic measurements are used to predict the thermal dose under in-vivo conditions. The implications of the results were discussed for potential applications in biomedical devices. PMID:26005843

  13. Temperature dependent mechanical property testing of nitrate thermal storage salts.

    SciTech Connect

    Iverson, Brian DeVon; Broome, Scott Thomas; Siegel, Nathan Phillip

    2010-08-01

    Three salt compositions for potential use in trough-based solar collectors were tested to determine their mechanical properties as a function of temperature. The mechanical properties determined were unconfined compressive strength, Young's modulus, Poisson's ratio, and indirect tensile strength. Seventeen uniaxial compression and indirect tension tests were completed. It was found that as test temperature increases, unconfined compressive strength and Young's modulus decreased for all salt types. Empirical relationships were developed quantifying the aforementioned behaviors. Poisson's ratio tends to increase with increasing temperature except for one salt type where there is no obvious trend. The variability in measured indirect tensile strength is large, but not atypical for this index test. The average tensile strength for all salt types tested is substantially higher than the upper range of tensile strengths for naturally occurring rock salts.

  14. On the mechanical properties of selenite glass nanocomposites

    NASA Astrophysics Data System (ADS)

    Bar, Arun Kr.; Kundu, Ranadip; Roy, Debasish; Bhattacharya, Sanjib

    2016-05-01

    In this paper the room temperature micro-hardness of selenite glass-nanocomposites has been measured using a Vickers and Knoop micro hardness tester where the applied load varies from 0.01N to 0.98 N. A significant indentation size effect was observed for each sample at relatively low indentation test loads. The classical Meyer's law and the proportional specimen resistance model were used to analyze the micro-hardness behavior. It was found that the selenite glass-nanocomposite becomes harder with increasing CuI composition and the work hardening coefficient and mechanical properties like Young modulus, E, were also calculated. Our results open the way for the preparation, application and investigation of significant mechanical properties of new type of glass-nanocomposites.

  15. Prediction of Mechanical Properties of Polymers With Various Force Fields

    NASA Technical Reports Server (NTRS)

    Odegard, Gregory M.; Clancy, Thomas C.; Gates, Thomas S.

    2005-01-01

    The effect of force field type on the predicted elastic properties of a polyimide is examined using a multiscale modeling technique. Molecular Dynamics simulations are used to predict the atomic structure and elastic properties of the polymer by subjecting a representative volume element of the material to bulk and shear finite deformations. The elastic properties of the polyimide are determined using three force fields: AMBER, OPLS-AA, and MM3. The predicted values of Young s modulus and shear modulus of the polyimide are compared with experimental values. The results indicate that the mechanical properties of the polyimide predicted with the OPLS-AA force field most closely matched those from experiment. The results also indicate that while the complexity of the force field does not have a significant effect on the accuracy of predicted properties, small differences in the force constants and the functional form of individual terms in the force fields determine the accuracy of the force field in predicting the elastic properties of the polyimide.

  16. Microstructures and mechanical properties of Ti-Mo alloys cold-rolled and heat treated

    SciTech Connect

    Zhou Yinglong; Luo Dongmei

    2011-10-15

    In this study, the microstructures and mechanical properties of Ti-10Mo and Ti-20Mo alloys (mass%) are investigated to assess the potential use in biomedical applications. The microstructures are examined by X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM). The mechanical properties are determined from uniaxial tensile tests. The experimental results indicate that the microstructures and mechanical properties of Ti-Mo alloys are dependent upon the cold rolling, solution heat treatment, and Mo content. The Ti-10Mo alloy exhibits ({alpha}'' + {beta}) and ({beta} + {omega}) phases under the cold rolling (CR) and solution treatment (ST), respectively. By contrast, the Ti-20Mo alloy comprises only {beta} phase under such conditions. The quenched Ti-20Mo alloy has the lowest elastic modulus and CR Ti-20Mo alloy has the highest tensile strength. The quenched Ti-10Mo alloy exhibits the excellent ductility and two-stage yielding from stress-strain curves due to the stress-induced martensite transformation from {beta} to {alpha}'' during tensile deformation. These Ti-Mo alloys exhibit low yield strength and good ductility, and they are more suitable for biomedical applications than the conventional metallic biomaterials from the viewpoint of better mechanical compatibility. The quenched Ti-10Mo alloy has some advantages over the other {beta} binary Ti-Mo alloys for biomedical applications. {beta} type Ti-Mo-Sn alloys are expected to be promising candidates for novel metallic biomaterials. - Highlights: {yields} The microstructures and mechanical properties of Ti-Mo alloys are dependent upon the cold rolling, solution heat treatment, and Mo content. {yields} The quenched Ti-10Mo alloy exhibits the excellent ductility and two-stage yielding due to stress-induced martensite transformation from beta to alpha double prime during tensile deformation. {yields} The Ti-Mo alloys are more suitable for biomedical applications than the conventional metallic

  17. Predicting the Highly Nonlinear Mechanical Properties of Polymeric Materials

    NASA Astrophysics Data System (ADS)

    Porter, David

    2009-06-01

    Over the past few years, we have developed models that calculate the highly nonlinear mechanical properties of polymers as a function of temperature, strain and strain rate from their molecular and morphological structure. A review of these models is presented here, with emphasis on combining the fundamental aspects of molecular physics that dictate these properties and the pragmatic need to make realistic predictions for our customers; the designer of new materials and the engineers who use these materials. The models calculate the highly nonlinear mechanical properties of polymers as a function of temperature, strain and strain rate from their molecular structure. The model is based upon the premise that mechanical properties are a direct consequence of energy stored and energy dissipated during deformation of a material. This premise is transformed into a consistent set of structure-property relations for the equation of state, EoS, and the engineering constitutive relations in a polymer by quantifying energy storage and loss at the molecular level of interactions between characteristic groups of atoms in a polymer. These relations are derived from a simple volumetric mean field Lennard-Jones potential function for the potential energy of intermolecular interactions in a polymer. First, properties such as temperature-volume relations and glass transition temperature are calculated directly from the potential function. Then, the `shock' EoS is derived simply by differentiating the potential function with respect to volume, assuming that the molecules cannot relax in the time scales of the deformation. The energy components are then used to predict the dynamic mechanical spectrum of a polymer in terms of temperature and rate. This can be transformed directly into the highly nonlinear stress-strain relations through yield. The constitutive relations are formulated as a set of analytical equations that predict properties directly in terms of a small set of

  18. Mechanical and biological properties of oxidized horn keratin.

    PubMed

    Zhang, Quanbin; Shan, Guanghua; Cao, Ping; He, Jia; Lin, Zhongshi; Huang, Yaoxiong; Ao, Ningjian

    2015-02-01

    The goal of this study was to investigate the mechanical and biological properties of oxidized keratin materials, which were obtained by using buffalo horns to oxidize. It could provide a way to evaluate their potential for clinical translatability. The characterization on their composition, mechanical properties, and biological responses was performed. It is found that the oxidation process could lead the disulfide bond to break down and then to form sulfonic acid, or even make partial peptide chain to be fragment for the new modification of amino acid. Hence the oxidized horn keratins have lower thermal stability and hydrolytic stability in comparison with horn keratin, but the degradation products of oxidized horn keratins have no significant difference. In addition, the mechanical properties of oxidized horn keratins are poorer than that of horn keratin, but the oxidized horn keratins still have disulfide bonds to form a three-dimensional structure, which benefits for their mechanical properties. The fracture toughness of oxidized horn keratins increases with the increase in the degree of oxidation. After oxidation, the oxidized horn keratins have lower cytotoxicity and lower hemolysis ratio. Moreover, when the oxidized horn keratins, as well as different concentration of degradation products of oxidized horn keratins, are directly in contact with platelet-rich plasma, platelets are not activated. It suggests that the oxidized horn keratins have good hemocompatibility, without triggering blood thrombosis. The implantation experiment in vivo also demonstrates that the oxidized horn keratins are compatible with the tissue, because there are minimal fibrous capsule and less of infiltration of host cells, without causing serious inflammation. In summary, the oxidized horn keratins can act as implanted biomaterial devices that are directly in contact with blood and tissue. PMID:25492180

  19. Mechanical properties of D0 Run IIB silicon detector staves

    SciTech Connect

    Lanfranco, Giobatta; Fast, James; /Fermilab

    2001-06-01

    A proposed stave design for the D0 Run IIb silicon tracker outer layers featuring central cooling channels and a composite shell mechanical structure is evaluated for self-deflection and deflection due to external loads. This paper contains an introduction to the stave structure, a section devoted to composite lamina and laminate properties and finally a section discussing the beam deflections expected for assembled staves using these laminates.

  20. On-machine sensors to measure paper mechanical properties

    SciTech Connect

    Hall, M.S.; Brodeur, B.H.; Jackson, T.G.

    1992-12-31

    The measurement of the velocity of ultrasound provides a nondestructive means to characterize the mechanical properties of paper. The objective of this program is to develop sensors capable of making such measurements in the thickness and in-plane directions of paper while the paper is moving at line speed on the paper machine. This would allow continuous monitoring of product quality as well as provide data for controlling the papermaking process.

  1. On-machine sensors to measure paper mechanical properties

    SciTech Connect

    Hall, M.S.; Brodeur, B.H.; Jackson, T.G.

    1991-01-01

    The purpose of the program is to develop sensors capable of measuring the velocity of ultrasound in the thickness and in-plane directions of paper while the paper is moving at line speed on the paper machine. These measurements would provide a nondestructive characterization of the mechanical properties of paper, allowing continuous monitoring of product quality as well as providing data for controlling the papermaking process.

  2. On-machine sensors to measure paper mechanical properties

    SciTech Connect

    Hall, M.S.; Brodeur, B.H.; Jackson, T.G.

    1991-12-31

    The purpose of the program is to develop sensors capable of measuring the velocity of ultrasound in the thickness and in-plane directions of paper while the paper is moving at line speed on the paper machine. These measurements would provide a nondestructive characterization of the mechanical properties of paper, allowing continuous monitoring of product quality as well as providing data for controlling the papermaking process.

  3. On-machine sensors to measure paper mechanical properties

    SciTech Connect

    Hall, M.S.; Brodeur, B.H.; Jackson, T.G.

    1992-01-01

    The measurement of the velocity of ultrasound provides a nondestructive means to characterize the mechanical properties of paper. The objective of this program is to develop sensors capable of making such measurements in the thickness and in-plane directions of paper while the paper is moving at line speed on the paper machine. This would allow continuous monitoring of product quality as well as provide data for controlling the papermaking process.

  4. Nondestructive measurement of esophageal biaxial mechanical properties utilizing sonometry.

    PubMed

    Aho, Johnathon M; Qiang, Bo; Wigle, Dennis A; Tschumperlin, Daniel J; Urban, Matthew W

    2016-07-01

    Malignant esophageal pathology typically requires resection of the esophagus and reconstruction to restore foregut continuity. Reconstruction options are limited and morbid. The esophagus represents a useful target for tissue engineering strategies based on relative simplicity in comparison to other organs. The ideal tissue engineered conduit would have sufficient and ideally matched mechanical tolerances to native esophageal tissue. Current methods for mechanical testing of esophageal tissues both in vivo and ex vivo are typically destructive, alter tissue conformation, ignore anisotropy, or are not able to be performed in fluid media. The aim of this study was to investigate biomechanical properties of swine esophageal tissues through nondestructive testing utilizing sonometry ex vivo. This method allows for biomechanical determination of tissue properties, particularly longitudinal and circumferential moduli and strain energy functions. The relative contribution of mucosal-submucosal layers and muscular layers are compared to composite esophagi. Swine thoracic esophageal tissues (n  =  15) were tested by pressure loading using a continuous pressure pump system to generate stress. Preconditioning of tissue was performed by pressure loading with the pump system and pre-straining the tissue to in vivo length before data was recorded. Sonometry using piezocrystals was utilized to determine longitudinal and circumferential strain on five composite esophagi. Similarly, five mucosa-submucosal and five muscular layers from thoracic esophagi were tested independently. This work on esophageal tissues is consistent with reported uniaxial and biaxial mechanical testing and reported results using strain energy theory and also provides high resolution displacements, preserves native architectural structure and allows assessment of biomechanical properties in fluid media. This method may be of use to characterize mechanical properties of tissue engineered esophageal

  5. Mechanical and thermophysical properties of hot-pressed SYNROC B

    SciTech Connect

    Hoenig, C.L.; Newkirk, H.W.; Otto, R.A.; Brady, R.L.; Brown, A.E.; Ulrich, A.R.; Lum, R.C.

    1981-05-06

    The optimal SYNROC compositons for use with commercial waste are reviewed. Large amounts of powder (about 2.5 kg) were prepared by convention al ceramic operations to test the SYNROC concept on a processing scale. Samples, 15.2 cm in diameter, were hot pressed in graphite, and representative samples were cut for microstructural evaluations. Measured mechanical and thermophysical properties did not vary significantly as a function of sample location and were typical of titanate ceramic materials.

  6. Nondestructive measurement of esophageal biaxial mechanical properties utilizing sonometry

    NASA Astrophysics Data System (ADS)

    Aho, Johnathon M.; Qiang, Bo; Wigle, Dennis A.; Tschumperlin, Daniel J.; Urban, Matthew W.

    2016-07-01

    Malignant esophageal pathology typically requires resection of the esophagus and reconstruction to restore foregut continuity. Reconstruction options are limited and morbid. The esophagus represents a useful target for tissue engineering strategies based on relative simplicity in comparison to other organs. The ideal tissue engineered conduit would have sufficient and ideally matched mechanical tolerances to native esophageal tissue. Current methods for mechanical testing of esophageal tissues both in vivo and ex vivo are typically destructive, alter tissue conformation, ignore anisotropy, or are not able to be performed in fluid media. The aim of this study was to investigate biomechanical properties of swine esophageal tissues through nondestructive testing utilizing sonometry ex vivo. This method allows for biomechanical determination of tissue properties, particularly longitudinal and circumferential moduli and strain energy functions. The relative contribution of mucosal–submucosal layers and muscular layers are compared to composite esophagi. Swine thoracic esophageal tissues (n  =  15) were tested by pressure loading using a continuous pressure pump system to generate stress. Preconditioning of tissue was performed by pressure loading with the pump system and pre-straining the tissue to in vivo length before data was recorded. Sonometry using piezocrystals was utilized to determine longitudinal and circumferential strain on five composite esophagi. Similarly, five mucosa–submucosal and five muscular layers from thoracic esophagi were tested independently. This work on esophageal tissues is consistent with reported uniaxial and biaxial mechanical testing and reported results using strain energy theory and also provides high resolution displacements, preserves native architectural structure and allows assessment of biomechanical properties in fluid media. This method may be of use to characterize mechanical properties of tissue engineered

  7. Mechanical properties of green composites based on thermoplastic starch

    NASA Astrophysics Data System (ADS)

    Fornes, F.; Sánchez-Nácher, L.; Fenollar, O.; Boronat, T.; Garcia-Sanoguera, D.

    2010-06-01

    The present work is focused on study of "green composites" elaborated from thermoplastic starch (TPS) as polymer matrix and a fiber from natural origin (rush) as reinforced fiber. The effect of the fiber content has been studied by means of the mechanical properties. The composite resulting presents a lack of interaction between matrix and fiber that represents a performance decrease. However the biodegradability behavior of the resulting composite raise this composite as useful an industrial level.

  8. Mechanical properties and modeling of seal-forming lithologies

    SciTech Connect

    Kronenberg, A.K.; Russell, J.E.; Carter, N.L.; Mazariegos, R.; Shea, W.T.

    1991-03-01

    The goal of this research is to evaluate the roles of deformation and the occurrence of weak sedimentary lithologies subjected to gravitational loads in shaping conventional and unconventional oil and gas reservoirs. Two sedimentary lithologies that influence the geometries, physical properties, and heterogeneities of oil and gas reservoirs are shale and rocksalt. Both form effect barriers to the flow and communication of petroleum and gas and, in many cases, form the seals to major reservoirs due to their low permeabilities. Both are actively deformed in depositional environments due to their low strengths relative to gravitational loads applied. Thus, the shapes of seal-forming units, and the nature of fractures and faults that may breach them depend upon either the mechanical properties of shale or those of salt, and the loading histories to which they have been subjected. Deformed shales may, in addition, serve as unconventional reservoirs of gas if open fractures within them provide sufficient porosity. The fracture and flow properties of shales are not well constrained, and the authors are currently investigating these properties experimentally. The rheology of rocksalt, on the other hand, is well known and they believe that the time is right to apply the experimentally constrained constitutive relations for rocksalt to deformations in the Earth. Efforts are continuing on modeling fracture anisotropy and the authors have examined simple, two-mica models to evaluate the mechanical interactions they proposed for gneiss and mica-poor schists. Brief summaries of the progress and results to date for (1) the mechanical properties of schist, (2) a two-mica model of fracture anisotropy, (3) deformation of shale, and (4) modeling of salt and shale tectonics of the northern Gulf of Mexico are given in the following sections. 35 refs., 33 figs., 1 tab.

  9. Structure and mechanical properties of Octopus vulgaris suckers.

    PubMed

    Tramacere, Francesca; Kovalev, Alexander; Kleinteich, Thomas; Gorb, Stanislav N; Mazzolai, Barbara

    2014-02-01

    In this study, we investigate the morphology and mechanical features of Octopus vulgaris suckers, which may serve as a model for the creation of a new generation of attachment devices. Octopus suckers attach to a wide range of substrates in wet conditions, including rough surfaces. This amazing feature is made possible by the sucker's tissues, which are pliable to the substrate profile. Previous studies have described a peculiar internal structure that plays a fundamental role in the attachment and detachment processes of the sucker. In this work, we present a mechanical characterization of the tissues involved in the attachment process, which was performed using microindentation tests. We evaluated the elasticity modulus and viscoelastic parameters of the natural tissues (E ∼ 10 kPa) and measured the mechanical properties of some artificial materials that have previously been used in soft robotics. Such a comparison of biological prototypes and artificial material that mimics octopus-sucker tissue is crucial for the design of innovative artificial suction cups for use in wet environments. We conclude that the properties of the common elastomers that are generally used in soft robotics are quite dissimilar to the properties of biological suckers. PMID:24284894

  10. Enhanced mechanical properties of nanocomposites at low graphene content.

    PubMed

    Rafiee, Mohammad A; Rafiee, Javad; Wang, Zhou; Song, Huaihe; Yu, Zhong-Zhen; Koratkar, Nikhil

    2009-12-22

    In this study, the mechanical properties of epoxy nanocomposites with graphene platelets, single-walled carbon nanotubes, and multi-walled carbon nanotube additives were compared at a nanofiller weight fraction of 0.1 +/- 0.002%. The mechanical properties measured were the Young's modulus, ultimate tensile strength, fracture toughness, fracture energy, and the material's resistance to fatigue crack propagation. The results indicate that graphene platelets significantly out-perform carbon nanotube additives. The Young's modulus of the graphene nanocomposite was approximately 31% greater than the pristine epoxy as compared to approximately 3% increase for single-walled carbon nanotubes. The tensile strength of the baseline epoxy was enhanced by approximately 40% with graphene platelets compared to approximately 14% improvement for multi-walled carbon nanotubes. The mode I fracture toughness of the nanocomposite with graphene platelets showed approximately 53% increase over the epoxy compared to approximately 20% improvement for multi-walled carbon nanotubes. The fatigue resistance results also showed significantly different trends. While the fatigue suppression response of nanotube/epoxy composites degrades dramatically as the stress intensity factor amplitude is increased, the reverse effect is seen for graphene-based nanocomposites. The superiority of graphene platelets over carbon nanotubes in terms of mechanical properties enhancement may be related to their high specific surface area, enhanced nanofiller-matrix adhesion/interlocking arising from their wrinkled (rough) surface, as well as the two-dimensional (planar) geometry of graphene platelets. PMID:19957928

  11. Novel F-releasing Composite with Improved Mechanical Properties

    PubMed Central

    Ling, L.; Xu, X.; Choi, G.-Y.; Billodeaux, D.; Guo, G.; Diwan, R.M.

    2009-01-01

    In recent years, the authors have been developing novel fluoride-releasing dental composites containing ternary zirconium fluoride chelates. The aim of this study was to improve the physical and mechanical properties of these composites by improving the formulation of the monomers and photoinitiators. The hypothesis was that reduction of hydrophilic monomers and improvement of the photoinitiators could reduce water sorption and significantly increase the mechanical properties of the composite. The degree of conversion of the composites containing different compositions of photoinitiators was studied by Fourier transform near-infrared spectroscopy (FT-NIR). Ten experimental composites containing different compositions of ethoxylated bisphenol-A dimethacrylate (EBPADMA), 1,6-hexanediol dimethacrylate (HDDMA), triethylene glycol dimethacrylate (TEGDMA), and 2,2-bis[4-(2-hydroxy-3-methacryloyloxypropoxy)phenyl]-propane (BisGMA) were tested for flexural strength, viscosity, and water sorption. The experimental composite containing 20% synthesized fluoride-releasing monomer, 30% BisGMA, 30% EBPADMA, and 20% HDDMA showed significantly higher fluoride release and recharge, but physical and mechanical properties similar to those of the control composite containing 40% BisGMA, 40% EBPADMA, and 20% HDDMA. PMID:19131323

  12. Reconstruction of Sedimentary Rock Based on MechanicalProperties

    SciTech Connect

    Jin, Guodong; Patzek, Tad W.; Silin, Dmitry B.

    2004-05-04

    We describe a general, physics-based approach to numericalreconstruction of the geometrical structure and mechanical properties ofnatural sedimentary rock in 3D. Our procedure consists of three mainsteps: sedimentation, compaction, and diagenesis, followed by theverification of rock mechanical properties. The dynamic geologicprocesses of grain sedimentation and compaction are simulated by solvinga dimensionless form of Newton's equations of motion for an ensemble ofgrains. The diagenetic rock transformation is modeled using a cementationalgorithm, which accounts for the effect of rock grain size on therelative rate of cement overgrowth. Our emphasis is on unconsolidatedsand and sandstone. The main input parameters are the grain sizedistribution, the final rock porosity, the type and amount of cement andclay minerals, and grain mechanical properties: the inter-grain frictioncoefficient, the cement strength, and the grain stiffness moduli. We usea simulated 2D Fontainebleau sandstone to obtain the grain mechanicalproperties. This Fontainebleau sandstone is also used to study theinitiation, growth, and coalescence of micro-cracks under increasingvertical stress. The box fractal dimension of the micro-crackdistribution, and its variation with the applied stress areestimated.

  13. Mechanical Properties of Murine Leukemia Virus Particles: Effect of Maturation

    PubMed Central

    Kol, Nitzan; Gladnikoff, Micha; Barlam, David; Shneck, Roni Z.; Rein, Alan; Rousso, Itay

    2006-01-01

    After budding from the host cell, retroviruses undergo a process of internal reorganization called maturation, which is prerequisite to infectivity. Viral maturation is accompanied by dramatic morphological changes, which are poorly understood in physical/mechanistic terms. Here, we study the mechanical properties of live mature and immature murine leukemia virus particles by indentation-type experiments conducted with an atomic force microscope tip. We find that both mature and immature particles have an elastic shell. Strikingly, the virus shell is twofold stiffer in the immature (0.68 N/m) than the mature (0.31 N/m) form. However, finite-element simulation shows that the average Young's modulus of the immature form is more than fourfold lower than that of the mature form. This finding suggests that per length unit, the protein-protein interactions in the mature shell are stronger than those in the immature shell. We also show that the mature virus shell is brittle, since it can be broken by application of large loading forces, by firm attachment to a substrate, or by repeated application of force. Our results are the first analysis of the mechanical properties of an animal virus, and demonstrate a linkage between virus morphology and mechanical properties. PMID:16632508

  14. Application of planetary analog mechanical properties to subsurface geological investigations

    NASA Astrophysics Data System (ADS)

    ElShafie, A.; Chevrier, V. F.; Dennis, N.

    2012-12-01

    Investigations of the mechanical properties of planetary analog materials are of great importance to improve future mission success and to enhance our understanding of the history and evolution of planetary surfaces and subsurfaces. Determining the stratigraphy of the subsurface using drills and penetrometers implies knowing the mechanical properties of the regolith. Therefore, we investigated the mechanical properties of Martian regolith analogs (JSC Mars-1 and an unaltered basaltic soil from Mojave desert). Penetration force is dependent on the bearing capacity factor (Nq) and the angle of internal friction which is found to be function of the level of compaction and increases with relative density. The bearing capacity factor (Nq) showed an exponential trend with the angle of internal friction. For Mojave soil, (Nq) increased from 64 to 338 with φ increasing from 32 to 41.3° while (Nq) increased from 161 to 3347 with φ increasing from 39.4 to 54.7° for JSC Mars-1. Based on estimation of the bearing capacity factor and the angle of internal friction, we predicted the force of penetration under the Martian gravity using a 1.2 cm diameter penetrometer. Under a bulk density of 1240 and 1500 kg m-3 in JSC Mars-1 and Mojave soil, 460 and 200 N is the estimated force to reach a depth of about 20 cm deep. Based on this investigation, distinguishing between different regolith layers on the subsurface of Mars is possible and observable using penetration force.

  15. Mechanical Properties of a Primary Cilium Measured by Resonant Oscillation

    NASA Astrophysics Data System (ADS)

    Resnick, Andrew

    Primary cilia are ubiquitous mammalian cellular substructures implicated in an ever-increasing number of regulatory pathways. The well-established `ciliary hypothesis' states that physical bending of the cilium (for example, due to fluid flow) initiates signaling cascades, yet the mechanical properties of the cilium remain incompletely measured, resulting in confusion regarding the biological significance of flow-induced ciliary mechanotransduction. In this work we measure the mechanical properties of a primary cilium by using an optical trap to induce resonant oscillation of the structure. Our data indicate 1), the primary cilium is not a simple cantilevered beam, 2), the base of the cilium may be modeled as a nonlinear rotatory spring, the linear spring constant `k' of the cilium base calculated to be (4.6 +/- 0.62)*10-12 N/rad and nonlinear spring constant ` α' to be (-1 +/- 0.34) *10-10 N/rad2 , and 3) the ciliary base may be an essential regulator of mechanotransduction signalling. Our method is also particularly suited to measure mechanical properties of nodal cilia, stereocilia, and motile cilia, anatomically similar structures with very different physiological functions.

  16. Bulk Mechanical Properties of Single Walled Carbon Nanotube Electrodes

    NASA Astrophysics Data System (ADS)

    Giarra, Matthew; Landi, Brian; Cress, Cory; Raffaelle, Ryne

    2007-03-01

    The unique properties of single walled carbon nanotubes (SWNTs) make them especially well suited for use as electrodes in power devices such as lithium ion batteries, hydrogen fuel cells, solar cells, and supercapacitors. The performances of such devices are expected to be influenced, at least in part, by the mechanical properties of the SWNTs used in composites or in stand alone ``papers.'' Therefore, the elastic moduli and ultimate tensile strengths of SWNT papers were measured as functions of temperature, SWNT purity, SWNT length, and SWNT bundling. The SWNTs used to produce the papers were synthesized in an alexandrite laser vaporization reactor at 1100^oC and purified using conventional acid-reflux conditions. Characterization of the SWNTs was performed using SEM, BET, TGA, and optical and Raman spectroscopy. The purified material was filtered and dried to yield papers of bundled SWNTs which were analyzed using dynamic mechanical analysis (DMA). It was observed that the mechanical properties of acid-refluxed SWNT papers were significantly improved by controlled thermal oxidation and strain-hardening. Elastic moduli of SWNT papers were measured between 3 and 6 GPa. Ultimate (breaking) tensile stresses were measured between 45 and 90 MPa at 1-3% strain. These results and their implications in regard to potential applications in power devices will be discussed.

  17. Structure and mechanical properties of Octopus vulgaris suckers

    PubMed Central

    Tramacere, Francesca; Kovalev, Alexander; Kleinteich, Thomas; Gorb, Stanislav N.; Mazzolai, Barbara

    2014-01-01

    In this study, we investigate the morphology and mechanical features of Octopus vulgaris suckers, which may serve as a model for the creation of a new generation of attachment devices. Octopus suckers attach to a wide range of substrates in wet conditions, including rough surfaces. This amazing feature is made possible by the sucker's tissues, which are pliable to the substrate profile. Previous studies have described a peculiar internal structure that plays a fundamental role in the attachment and detachment processes of the sucker. In this work, we present a mechanical characterization of the tissues involved in the attachment process, which was performed using microindentation tests. We evaluated the elasticity modulus and viscoelastic parameters of the natural tissues (E ∼ 10 kPa) and measured the mechanical properties of some artificial materials that have previously been used in soft robotics. Such a comparison of biological prototypes and artificial material that mimics octopus-sucker tissue is crucial for the design of innovative artificial suction cups for use in wet environments. We conclude that the properties of the common elastomers that are generally used in soft robotics are quite dissimilar to the properties of biological suckers. PMID:24284894

  18. Some physical and mechanical properties of roasted Zerun wheat.

    PubMed

    Işıklı, Nursel Develi; Senol, Belma; Coksöyler, Nafi

    2014-09-01

    Some physical and mechanical properties of roasted Zerun wheat were investigated in the moisture range from 8.80 % to 23.40 % wet basis. Mechanical properties were evaluated by examining the effect of moisture content upon the grain rupture force, energy and Weibull parameters. Length, width, thickness, porosity and angle of repose increased nonlinearly from 6.09 to 6.36 mm; 4.17 to 4.18 mm; 2.66 to 2.78 mm; 37.71 % to 39.09 % and 33.02° to 37.90°, respectively when moisture content increased. The Weibull distribution fits the data for rupture force and energy. The Weibull modulus and scale parameter for rupture force varied between 3.88 and 6.20; 26.61 and 44.24N, respectively. The Weibull modulus for energy increased from 2.15 to 3.24 with increased in moisture content. Measured mechanical properties of grains showed that the brittleness and fragile structure of the roasted grain gradually lost its characteristic crispiness and become soft and ductile above 13.78 % moisture content. PMID:25190855

  19. Rubber-toughened cyanate composites - Properties and toughening mechanism

    NASA Technical Reports Server (NTRS)

    Yang, P. C.; Woo, E. P.; Laman, S. A.; Jakubowski, J. J.; Pickelman, D. M.; Sue, H. J.

    1991-01-01

    Earlier work by Young et al. (1990) has shown that Dow experimental cyanate ester resin XU71787.02 is readily toughenable by rubber. A particularly effective rubber for this purpose is an experimental core-shell rubber which toughens the polymer by inducing shear yielding. This paper describes an investigation into the toughening mechanism in the corresponding carbon-fiber composite systems and the effect of fibers on composite properties. Resin-fiber interfacial shear strengths have been successfully correlated to the compressive strengths after impact and other key properties of composites based on rubber-toughened cyanate and several carbon fibers. The differences in the properties are explained by the difference in the functioning of the rubber particles during the fracture process.

  20. Vibrational, mechanical, and thermal properties of III-V semiconductors

    NASA Astrophysics Data System (ADS)

    Dow, John D.

    1989-02-01

    Theories of the mechanical, vibrational, and electronic properties of 3 to 5 semiconductors were developed and applied to: (1) help determine the feasibility of InN-based visible and ultraviolet lasers and light detectors, (2) develop a theory of phonons in semiconductor alloys, (3) understand surface reconstruction of semiconductors, (4) predict the effects of atomic correlations on the light-scattering (Raman) properties of semiconductive alloys, (5) develop a new first principles pseudo-function implementation of local-density theory, (6) study the oxidation of GaAs, (7) develop a theory of scanning tunneling microscope images, and (8) understand the electronic and optical properties of highly strained artificial semiconductors and small semiconductor particles.

  1. Roles of silica and lignin in horsetail (Equisetum hyemale), with special reference to mechanical properties

    NASA Astrophysics Data System (ADS)

    Yamanaka, Shigeru; Sato, Kanna; Ito, Fuyu; Komatsubara, Satoshi; Ohata, Hiroshi; Yoshino, Katsumi

    2012-02-01

    This research deals with detailed analyses of silica and lignin distribution in horsetail with special reference to mechanical strength. Scanning electron images of a cross-section of an internode showed silica deposited densely only around the outer epidermis. Detailed histochemical analyses of lignin showed no lignin deposition in the silica-rich outer internodes of horsetail, while a characteristic lignin deposition was noticed in the vascular bundle in inner side of internodes. To analyze the structure of horsetail from a mechanical viewpoint, we calculated the response of a model structure of horsetail to a mechanical force applied perpendicularly to the long axis by a finite element method. We found that silica distributed in the outer epidermis may play the major structural role, with lignin's role being limited ensuring that the vascular bundle keep waterproof. These results were in contrast to more modern tall trees like gymnosperms, for which lignin provides mechanical strength. Lignin has the advantage of sticking to cellulose, hemicellulose, and other materials. Such properties make it possible for plants containing lignin to branch. Branching of tree stems aids in competing for light and other atmospheric resources. This type of branching was impossible for ancient horsetails, which relied on the physical properties of silica. From the evolutional view points, over millennia in trees with high lignin content, true branching, and many chlorophyll-containing leaves developed.

  2. Effect of Hydroperoxides on Red Blood Cell Membrane Mechanical Properties

    PubMed Central

    Hale, John P.; Winlove, C. Peter; Petrov, Peter G.

    2011-01-01

    We investigate the effect of oxidative stress on red blood cell membrane mechanical properties in vitro using detailed analysis of the membrane thermal fluctuation spectrum. Two different oxidants, the cytosol-soluble hydrogen peroxide and the membrane-soluble cumene hydroperoxide, are used, and their effects on the membrane bending elastic modulus, surface tension, strength of confinement due to the membrane skeleton, and 2D shear elastic modulus are measured. We find that both oxidants alter significantly the membrane elastic properties, but their effects differ qualitatively and quantitatively. While hydrogen peroxide mainly affects the elasticity of the membrane protein skeleton (increasing the membrane shear modulus), cumene hydroperoxide has an impact on both membrane skeleton and lipid bilayer mechanical properties, as can be seen from the increased values of the shear and bending elastic moduli. The biologically important implication of these results is that the effects of oxidative stress on the biophysical properties, and hence the physiological functions, of the cell membrane depend on the nature of the oxidative agent. Thermal fluctuation spectroscopy provides a means of characterizing these different effects, potentially in a clinical milieu. PMID:22004746

  3. Do Stretch Durations Affect Muscle Mechanical and Neurophysiological Properties?

    PubMed

    Opplert, J; Genty, J-B; Babault, N

    2016-08-01

    The aim of the study was to determine whether stretching durations influence acute changes of mechanical and neurophysiological properties of plantar flexor muscles. Plantar flexors of 10 active males were stretched in passive conditions on an isokinetic dynamometer. Different durations of static stretching were tested in 5 randomly ordered experimental trials (1, 2, 3, 4 and 10×30-s). Fascicle stiffness index, evoked contractile properties and spinal excitability (Hmax/Mmax) were examined before (PRE), immediately after (POST0) and 5 min after (POST5) stretching. No stretch duration effect was recorded for any variable. Moreover, whatever the stretching duration, stiffness index, peak twitch torque and rate of force development were significantly lower at POST0 and POST5 as compared to PRE (P<0.05). Electromechanical delay was longer at POST0 and POST5 as compared to PRE (P<0.05). Whatever the stretch duration, no significant changes of Hmax/Mmax ratio were recorded. In conclusion, 30 s of static stretching to maximum tolerated discomfort is sufficient enough to alter mechanical properties of plantar flexor muscles, but 10×30 s does not significantly affect these properties further. Stretching does not impair spinal excitability. PMID:27191211

  4. Mechanical properties of several magnesium and aluminum composites. Final report

    SciTech Connect

    Tsangarakis, N.; Taleghani, B.

    1992-12-01

    Several composites of magnesium and aluminum alloys were tested in order to assess and evaluate their mechanical properties. The magnesium alloys were AZ91 C, ZE41 A, and commercially pure magnesium, reinforced with 40% by volume continuous graphite fiber. The tensile properties of these composites were not superior to those of unreinforced magnesium and estimates of their fracture toughness were low. The matrices of the aluminum composites were 2124-T6, 6061-T4, 2124-T4, and 2219-T4. The reinforcements were either particulate or whiskers of silicon carbide or boron carbide and their volume content was 15% to 30%. The aluminum composites which were reinforced with silicon carbide particulate exhibited improved yield and ultimate tensile stresses, as well as tensile elastic modulus over the unreinforced aluminum alloys. The 2124-T4/B4C/25p composite exhibited the highest ultimate tensile strength which was 511 MPa. The composite which was reinforced with whiskers of silicon carbide exhibited an endurance limit which was 20% higher than that of the matrix alloy. The compressive properties and fracture toughness of some of these aluminum composites were not improved over those of the unreinforced matrix alloy.... Composites, Mechanical properties.

  5. Measurement of the Mechanical Properties of Intact Collagen Fibrils

    NASA Astrophysics Data System (ADS)

    Mercedes, H.; Heim, A.; Matthews, W. G.; Koob, T.

    2006-03-01

    Motivated by the genetic disorder Ehlers-Danlos syndrome (EDS), in which proper collagen synthesis is interrupted, we are investigating the structural and mechanical properties of collagen fibrils. The fibrous glycoprotein collagen is the most abundant protein found in the human body and plays a key role in the extracellular matrix of the connective tissue, the properties of which are altered in EDS. We have selected as our model system the collagen fibrils of the sea cucumber dermis, a naturally mutable tissue. This system allows us to work with native fibrils which have their proteoglycan complement intact, something that is not possible with reconstituted mammalian collagen fibrils. Using atomic force microscopy, we measure, as a function of the concentration of divalent cations, the fibril diameter, its response to force loading, and the changes in its rigidity. Through these experiments, we will shed light on the mechanisms which control the properties of the sea cucumber dermis and hope to help explain the altered connective tissue extracellular matrix properties associated with EDS.

  6. Mechanical Properties of Mineralized Collagen Fibrils As Influenced By Demineralization

    SciTech Connect

    Balooch, M.; Habelitz, S.; Kinney, J.H.; Marshall, S.J.; Marshall, G.W.

    2009-05-11

    Dentin and bone derive their mechanical properties from a complex arrangement of collagen type-I fibrils reinforced with nanocrystalline apatite mineral in extra- and intrafibrillar compartments. While mechanical properties have been determined for the bulk of the mineralized tissue, information on the mechanics of the individual fibril is limited. Here, atomic force microscopy was used on individual collagen fibrils to study structural and mechanical changes during acid etching. The characteristic 67 nm periodicity of gap zones was not observed on the mineralized fibril, but became apparent and increasingly pronounced with continuous demineralization. AFM-nanoindentation showed a decrease in modulus from 1.5 GPa to 50 MPa during acid etching of individual collagen fibrils and revealed that the modulus profile followed the axial periodicity. The nanomechanical data, Raman spectroscopy and SAXS support the hypothesis that intrafibrillar mineral etches at a substantially slower rate than the extrafibrillar mineral. These findings are relevant for understanding the biomechanics and design principles of calcified tissues derived from collagen matrices.

  7. Mechanical Properties of Type IV Pili in P. Aeruginosa

    NASA Astrophysics Data System (ADS)

    Lu, Shun; Touhami, Ahmed; Scheurwater, Edie; Harvey, Hanjeong; Burrows, Lori; Dutcher, John

    2009-03-01

    Type IV pili (Tfp) are thin flexible protein filaments that extend from the cell membrane of bacteria such as Pseudomonas aeruginosa and Neisseria gonorrhoeae. The mechanical properties of Tfp are of great importance since they allow bacteria to interact with and colonize various surfaces. In the present study, we have used atomic force microscopy (AFM) for both imaging and pulling on Tfp from P. aeruginosa (PAO1) and from its PilA, PilT, and FliC mutants. A single pilus filament was mechanically stretched and the resulting force-extension profiles were fitted using the worm-like-chain (WLC) model. The statistical distributions obtained for contour length, persistence length, and number of pili per bacteria pole, were used to evaluate the mechanical properties of a single pilus and the biogenesis functions of different proteins (PilA, PilT) involved in its assembly and disassembly. Importantly, the persistence length value of ˜ 1 μm measured in the present study, which is consistent with the curvature of the pili observed in our AFM images, is significantly lower than the value of 5 μm reported earlier by Skerker et al. (1). Our results shed new light on the role of mechanical forces that mediate bacteria-surface interactions and biofilm formation. 1- J.M. Skerker and H.C. Berg, Proc. Natl. Acad. Sci. USA, 98, 6901-6904 (2001).

  8. Mechanical properties of layered poly (ethylene glycol) gels.

    PubMed

    Skornia, S L; Bledsoe, J G; Kelso, B; Kuntz Willitz, R

    2007-01-01

    Poly(ethylene glycol) (PEG) hydrogels have become a popular material for biomedical applications because of their versatility in use and design. As these gels are readily crosslinked under UV, microfabrication techniques have been investigated to manufacture complex three dimensional structures to better mimic the in vivo environment. This work investigated whether a layering technique to fabricate gels offered sufficient strength between the layers to perform similarly in mechanical testing to unlayered gels. Two mechanical tests were performed: tensile tests and peel tests. The tensile tests, which examined sample gels whose test sections were crosslinked for different durations, demonstrated no statistical differences in elastic modulus between sample and control gels. As expected, a statistical increase in the elastic modulus was found with increased PEG concentration. Comparison of the yield stress between samples and controls illustrated differences with total crosslinking duration, which may be due to the decreased molecular weight of the chains with decreased crosslinking time. In peel tests, no statistical differences of maximum peel force were found between samples and controls. However, an increase in the maximum peel force was found with increasing concentration of PEG. Overall, this study demonstrates that the layering process described for the PEG gels has minimal impact on the tested mechanical properties of the system. As mechanical properties are critical to the design of tissue engineered devices, these results demonstrate that this fabrication method may be appropriate for further study as a scaffold for complex cellular systems. PMID:20799187

  9. Prediction of mechanical properties of trabecular bone using quantitative MRI

    NASA Astrophysics Data System (ADS)

    Lammentausta, E.; Hakulinen, M. A.; Jurvelin, J. S.; Nieminen, M. T.

    2006-12-01

    Techniques for quantitative magnetic resonance imaging (MRI) have been developed for non-invasive estimation of the mineral density and structure of trabecular bone. The R*2 relaxation rate (i.e. 1/T*2) is sensitive to bone mineral density (BMD) via susceptibility differences between trabeculae and bone marrow, and by binarizing MRI images, structural variables, such as apparent bone volume fraction, can be assessed. In the present study, trabecular bone samples of human patellae were investigated in vitro at 1.5 T to determine the ability of MRI-derived variables (R*2 and bone volume fraction) to predict the mechanical properties (Young's modulus, yield stress and ultimate strength). Further, the MRI variables were correlated with reference measurements of volumetric BMD and bone area fraction as determined with a clinical pQCT system. The MRI variables correlated significantly (p < 0.01) with the mechanical variables (r = 0.32-0.46), BMD (r = 0.56) and bone structure (r = 0.51). A combination of R*2 and MRI-derived bone volume fraction further improved the prediction of yield stress and ultimate strength. Although pQCT showed a trend towards better prediction of the mechanical properties, current results demonstrate the feasibility of combined MR imaging of marrow susceptibility and bone volume fraction in predicting the mechanical strength of trabecular bone and bone mineral density.

  10. Time-Temperature Superposition Applied to PBX Mechanical Properties

    NASA Astrophysics Data System (ADS)

    Thompson, Darla; Deluca, Racci

    2011-06-01

    The use of plastic-bonded explosives (PBXs) in weapon applications requires a certain level of structural/mechanical integrity. Uniaxial tension and compression experiments characterize the mechanical response of materials over a wide range of temperatures and strain rates, providing the basis for predictive modeling in more complex geometries. After years of data collection on a wide variety of PBX formulations, we have applied time-temperature superposition principles to a mechanical properties database which includes PBX 9501, PBX 9502, PBXN-110, PBXN-9, and HPP (propellant). The results of quasi-static tension and compression, SHPB compression, and cantilever DMA are compared. Time-temperature relationships of maximum stress and corresponding strain values are analyzed in addition to the more conventional analysis of modulus. Our analysis shows adherence to the principles of time-temperature superposition and correlations of mechanical response to the binder glass transition and specimen density. Direct ties relate time-temperature analysis to the underlying basis of existing PBX mechanical models (ViscoSCRAM). Results suggest that, within limits, mechanical response can be predicted at conditions not explicitly measured. LA-UR 11-01096.

  11. Manipulation of individual viruses: friction and mechanical properties.

    PubMed Central

    Falvo, M R; Washburn, S; Superfine, R; Finch, M; Brooks, F P; Chi, V; Taylor, R M

    1997-01-01

    We present our results on the manipulation of individual viruses using an advanced interface for atomic force microscopes (AFMs). We show that the viruses can be dissected, rotated, and translated with great facility. We interpret the behavior of tobacco mosaic virus with a mechanical model that makes explicit the competition between sample-substrate lateral friction and the flexural rigidity of the manipulated object. The manipulation behavior of tobacco mosaic virus on graphite is shown to be consistent with values of lateral friction observed on similar interfaces and the flexural rigidity expected for macromolecular assemblies. The ability to manipulate individual samples broadens the scope of possible studies by providing a means for positioning samples at specific binding sites or predefined measuring devices. The mechanical model provides a framework for interpreting quantitative measurements of virus binding and mechanical properties and for understanding the constraints on the successful, nondestructive AFM manipulation of delicate samples. Images FIGURE 1 FIGURE 2 FIGURE 3 FIGURE 5 PMID:9138585

  12. Multi-modality gellan gum-based tissue-mimicking phantom with targeted mechanical, electrical, and thermal properties

    NASA Astrophysics Data System (ADS)

    Chen, Roland K.; Shih, A. J.

    2013-08-01

    This study develops a new class of gellan gum-based tissue-mimicking phantom material and a model to predict and control the elastic modulus, thermal conductivity, and electrical conductivity by adjusting the mass fractions of gellan gum, propylene glycol, and sodium chloride, respectively. One of the advantages of gellan gum is its gelling efficiency allowing highly regulable mechanical properties (elastic modulus, toughness, etc). An experiment was performed on 16 gellan gum-based tissue-mimicking phantoms and a regression model was fit to quantitatively predict three material properties (elastic modulus, thermal conductivity, and electrical conductivity) based on the phantom material's composition. Based on these material properties and the regression model developed, tissue-mimicking phantoms of porcine spinal cord and liver were formulated. These gellan gum tissue-mimicking phantoms have the mechanical, thermal, and electrical properties approximately equivalent to those of the spinal cord and the liver.

  13. Mechanical and hydraulic properties of rocks related to induced seismicity

    USGS Publications Warehouse

    Witherspoon, P.A.; Gale, J.E.

    1977-01-01

    Witherspoon, P.A. and Gale, J.E., 1977. Mechanical and hydraulic properties of rocks related to induced seismicity. Eng. Geol., 11(1): 23-55. The mechanical and hydraulic properties of fractured rocks are considered with regard to the role they play in induced seismicity. In many cases, the mechanical properties of fractures determine the stability of a rock mass. The problems of sampling and testing these rock discontinuities and interpreting their non-linear behavior are reviewed. Stick slip has been proposed as the failure mechanism in earthquake events. Because of the complex interactions that are inherent in the mechanical behavior of fractured rocks, there seems to be no simple way to combine the deformation characteristics of several sets of fractures when there are significant perturbations of existing conditions. Thus, the more important fractures must be treated as individual components in the rock mass. In considering the hydraulic properties, it has been customary to treat a fracture as a parallel-plate conduit and a number of mathematical models of fracture systems have adopted this approach. Non-steady flow in fractured systems has usually been based on a two-porosity model, which assumes the primary (intergranular) porosity contributes only to storage and the secondary (fracture) porosity contributes only to the overall conductivity. Using such a model, it has been found that the time required to achieve quasi-steady state flow in a fractured reservoir is one or two orders of magnitude greater than it is in a homogeneous system. In essentially all of this work, the assumption has generally been made that the fractures are rigid. However, it is clear from a review of the mechanical and hydraulic properties that not only are fractures easily deformed but they constitute the main flow paths in many rock masses. This means that one must consider the interaction of mechanical and hydraulic effects. A considerable amount of laboratory and field data is now

  14. Sheared graphene: Electronic properties shaped by a mechanical instability

    NASA Astrophysics Data System (ADS)

    Concha, Andres; Cheng, Shengfeng; Covaci, Lucian; Mahadevan, L.

    2015-03-01

    We explore the effects of shearing graphene ribbons on its geometry, and electronic properties. Inspired by macroscopic experiments, we show that spontaneous patterns appear when a wide ribbon is subject to shear. We compared this pattern and different regimes obtained via MD simulations with macroscopic experiments, and find good agreement between them. Beyond the low shear regime a second generation of wrinkles emerge when the system relaxes trying to keep the bond lengths as close to the relaxed length as possible. Remarkably, for all shear ratios the induced superlattice generates a momentum kick when electronic excitations enter the deformed region, an effective pseudo-magnetic superlattice, and a strong Fermi velocity renormalization. These effects modify electronic properties and suggest a simple route to engineer electronic waveguides and switches at the nanoscale. Our proposal is a concrete realization of a quantum device that takes full advantage of an elastic instability that spans from the nano to macro -scales. AC was partially supported by Conicyt Grant 79112004, and Fondecyt under Grant 11130075. LC acknowledges individual support from FWO-Vlaanderen.

  15. Electronic and mechanical properties of chemically functionalized nanowires

    NASA Astrophysics Data System (ADS)

    Bidasaria, Sanjay K.

    2009-12-01

    Organic and inorganic nanostructured materials, nano- and mesoscale objects and devices, and their integration into existing microelectronic technologies have been at the center of recent fundamental and applied research in nanotechnology. One of the critical needs is to develop an enhanced predictive capability of structure-property correlations and enable robust high performance systems by design. My thesis work was concerned with the theoretical and experimental studies of electronic and mechanical properties of chemically functionalized nanowires. I will first describe a theoretical approach for investigating structure-property correlations in atomic-sized metallic wires based on the Density Functional Theory (DFT) for structure calculations and the Non-equilibrium Green's Function (NEGF) technique for electronic transport properties simulations. This synergistic approach is shown to yield the atomic structure of the smallest niobium nanowires. Furthermore, the method was applied to simulate electronic properties of chemically functionalized graphene nanoribbons. Further, I will demonstrate an experimental technique for simultaneous measurements of force and conductance in atomic-size objects based on quartz tuning fork piezoelectric sensors. A peculiar scaling effect, relevant for a broad range of test and measurement applications, namely the squeeze film effect, was observed during the development of the sensors. Using theoretical analysis based on finite element simulations of the hydrodynamic behavior of the sensors in a broad range of ambient conditions, I explain the observed phenomenon.

  16. Morphology, orientation, and mechanical properties of gelatin films

    SciTech Connect

    Blanton, T.N.; Tsou, A.H.

    1996-12-31

    Gelatin is a polypeptide derived from degradation and disorganization of collagen fibers and is the primary binder in photographic emulsions. Gelatin provides the mechanical integrity and strength to the photographic emulsion allowing for packaging, handling, and photofinishing operations. Gelatin films generated from aqueous-solution casting can exist in a semicrystalline or an amorphous state. When a gelatin solution is cooled below its helix-coil transition temperature, partial renaturation of gelatin to form triple helices can occur. The degree of renaturation in a coated film is dependent upon the drying temperature and the drying rate. During the drying process, gelatin crystals can be formed by lateral association of the triple helices through a mechanism of nucleation and growth of a fringed micelle structure. X-ray scattering techniques have been utilized to examine the morphology and orientation of gelatin films. Based on X-ray diffraction data, it is observed that aggregates of triple-helix rods lie parallel to the film plane but are symmetrically distributed within the film plane. Since a material`s physical and mechanical properties are related to its structure, it is necessary to understand and to characterize the morphological development in gelatin film formation. In this study, an X-ray diffractometer and pole figure goniometer were utilized to examine the structural development and orientation anisotropy in solid-state gelatin films. Also, in this study, the in-plane mechanical properties of a gelatin film were determined from a uniaxial tensile test, and the gelatin film properties in the thickness direction were extracted from an indentation test based on the finite element analysis of the indentation results using a viscoelastic material model.

  17. Effect of diet on mechanical properties of horse's hair.

    PubMed

    Kania, Małgorzata; Mikołajewska, Dorota; Marycz, Krzysztof; Kobielarz, Magdalena

    2009-01-01

    The aim of this research was to assess the effect of diet supplementation with zinc and copper, in different chemical forms (organic and inorganic), on the mechanical properties of the hair of healthy English thoroughbred horses. Hairs were taken from 18 horses which had been fed with oats and hay for a period of 110 days. Twelve of the horses had been additionally given a daily dose of 700 g of highquality 44-ingredients Fohlengold St-Hippolyt muesli made by Muhle Ebert Dilheim. Six of them had received the muesli-containing organic zinc and copper (OS), while the other six horses had received the muesli-containing inorganic zinc and copper (IS). The mechanical properties of the hairs before and after the supplementation period were tested in a Synergie 100 (MTS) testing machine. Each of the hairs was loaded at a constant rate of 20 mm/min until rupture. Young modulus (E), breaking stress (Ru) and yield point (Rs) of the particular hairs were determined. No significant changes in the mechanical parameters were observed in the reference group in which the horses were fed with only oats and hay for the whole experimental period of 110 days. The supplementation of the diet with inorganic zinc and copper resulted in an increase in the elasticity and diameter of the hairs and in a simultaneous reduction in their strength. Whereas organic zinc and copper caused an increase in the elasticity and strength of the hairs and a simultaneous reduction in their diameter. It has been shown that the organic form of the supplemented trace zinc and copper (mainly copper) elements has a beneficial effect on the mechanical properties of the hairs since it results in an increase in both their elasticity and strength. PMID:20131751

  18. Mechanical properties of lunar regolith and lunar soil simulant

    NASA Technical Reports Server (NTRS)

    Perkins, Steven W.

    1989-01-01

    Through the Surveyor 3 and 7, and Apollo 11-17 missions a knowledge of the mechanical properties of Lunar regolith were gained. These properties, including material cohesion, friction, in-situ density, grain-size distribution and shape, and porosity, were determined by indirect means of trenching, penetration, and vane shear testing. Several of these properties were shown to be significantly different from those of terrestrial soils, such as an interlocking cohesion and tensile strength formed in the absence of moisture and particle cementation. To characterize the strength and deformation properties of Lunar regolith experiments have been conducted on a lunar soil simulant at various initial densities, fabric arrangements, and composition. These experiments included conventional triaxial compression and extension, direct tension, and combined tension-shear. Experiments have been conducted at low levels of effective confining stress. External conditions such as membrane induced confining stresses, end platten friction and material self weight have been shown to have a dramatic effect on the strength properties at low levels of confining stress. The solution has been to treat these external conditions and the specimen as a full-fledged boundary value problem rather than the idealized elemental cube of mechanics. Centrifuge modeling allows for the study of Lunar soil-structure interaction problems. In recent years centrifuge modeling has become an important tool for modeling processes that are dominated by gravity and for verifying analysis procedures and studying deformation and failure modes. Centrifuge modeling is well established for terrestrial enginering and applies equally as well to Lunar engineering. A brief review of the experiments is presented in graphic and outline form.

  19. Bone scaffolds with homogeneous and discrete gradient mechanical properties.

    PubMed

    Jelen, C; Mattei, G; Montemurro, F; De Maria, C; Mattioli-Belmonte, M; Vozzi, G

    2013-01-01

    Bone TE uses a scaffold either to induce bone formation from surrounding tissue or to act as a carrier or template for implanted bone cells or other agents. We prepared different bone tissue constructs based on collagen, gelatin and hydroxyapatite using genipin as cross-linking agent. The fabricated construct did not present a release neither of collagen neither of genipin over its toxic level in the surrounding aqueous environment. Each scaffold has been mechanically characterized with compression, swelling and creep tests, and their respective viscoelastic mechanical models were derived. Mechanical characterization showed a practically elastic behavior of all samples and that compressive elastic modulus basically increases as content of HA increases, and it is strongly dependent on porosity and water content. Moreover, by considering that gradients in cellular and extracellular architecture as well as in mechanical properties are readily apparent in native tissues, we developed discrete functionally graded scaffolds (discrete FGSs) in order to mimic the graded structure of bone tissue. These new structures were mechanically characterized showing a marked anisotropy as the native bone tissue. Results obtained have shown FGSs could represent valid bone substitutes. PMID:25428038

  20. Measurement of Mechanical Properties of Cantilever Shaped Materials

    PubMed Central

    Finot, Eric; Passian, Ali; Thundat, Thomas

    2008-01-01

    Microcantilevers were first introduced as imaging probes in Atomic Force Microscopy (AFM) due to their extremely high sensitivity in measuring surface forces. The versatility of these probes, however, allows the sensing and measurement of a host of mechanical properties of various materials. Sensor parameters such as resonance frequency, quality factor, amplitude of vibration and bending due to a differential stress can all be simultaneously determined for a cantilever. When measuring the mechanical properties of materials, identifying and discerning the most influential parameters responsible for the observed changes in the cantilever response are important. We will, therefore, discuss the effects of various force fields such as those induced by mass loading, residual stress, internal friction of the material, and other changes in the mechanical properties of the microcantilevers. Methods to measure variations in temperature, pressure, or molecular adsorption of water molecules are also discussed. Often these effects occur simultaneously, increasing the number of parameters that need to be concurrently measured to ensure the reliability of the sensors. We therefore systematically investigate the geometric and environmental effects on cantilever measurements including the chemical nature of the underlying interactions. To address the geometric effects we have considered cantilevers with a rectangular or circular cross section. The chemical nature is addressed by using cantilevers fabricated with metals and/or dielectrics. Selective chemical etching, swelling or changes in Young's modulus of the surface were investigated by means of polymeric and inorganic coatings. Finally to address the effect of the environment in which the cantilever operates, the Knudsen number was determined to characterize the molecule-cantilever collisions. Also bimaterial cantilevers with high thermal sensitivity were used to discern the effect of temperature variations. When appropriate

  1. Investigation on mechanical properties of basalt composite fabrics (experiment study)

    NASA Astrophysics Data System (ADS)

    Talebi Mazraehshahi, H.; Zamani, H.

    2010-06-01

    To fully appreciate the role and application of composite materials to structures, correct understanding of mechanical behaviors required for selection of optimum material. Fabric reinforced composites are composed of a matrix that is reinforced with pliable fabric, glass fabric is most popular reinforcement for different application specially in aircraft structure, although other fabric material are also used. At this study new fabric material called basalt with epoxy resin introduced and mechanical behaviors of this material investigated from view point of testing. For this study two type of fabric with different thickness used. Comparison between this composite reinforcement with popular reinforcement as carbon, glass, kevlar performed. To determine mechanical properties of epoxy based basalt fabric following test procedure performed : 1). Tensile testing according to ASTM D3039 in 0° and 90° direction to find ultimate strength in tension and shear, modulus of elasticity, elangation and ultimate strain. 2). Compression testing according to EN 2850 ultimate compression strength and maximum deformation under compression loading. 3). Shear testing according to ASTM D3518-94 to find in plane shear response of polymer matrix composites materials. 4). Predict flexural properties of sandwich construction which manufactured from basalt facing with PVC foam core according to ASTM C393-94. Material strength properties must be based on enough tests of material to meet the test procedure specifications [1]. For this reason six specimens were manufactured for testing and the tests were performed on them using an INSTRON machine model 5582. In the study, the effect of percent of resin in basalt reinforced composite was investigated. Also the weights of the ballast based composites with different percent of resin were measured with conventional composites. As the weight is an important parameter in aerospace industry when the designer wants to replace one material with

  2. On the mechanical properties of bovine serum albumin (BSA) adhesives.

    PubMed

    Berchane, N S; Andrews, M J; Kerr, S; Slater, N K H; Jebrail, F F

    2008-04-01

    Biological adhesives, natural and synthetic, are of current active interest. These adhesives offer significant advantages over traditional sealant techniques, in particular, they are easier to use, and can play an integral part in the healing mechanism of tissue. Thus, biological adhesives can play a major role in medical applications if they possess adequate mechanical behavior and stability over time. In this work, we report on the method of preparation of bovine serum albumin (BSA) into a biological adhesive. We present quantitative measurements that show the effect of BSA concentration and cross-linker content on the bonding strength of BSA adhesive to wood. A comparison is then made with synthetic poly(glycidyl methacrylate) (PGMA) adhesive, and a commercial cyanoacrylate glue, which was used as a control adhesive. In addition, BSA samples were prepared and characterized for their water content, tensile strength, and elasticity. We show that on dry surface, BSA adhesive exhibits a high bonding strength that is comparable with non-biological commercial cyanoacrylate glues, and synthetic PGMA adhesive. Tensile testing on wet wood showed a slight increase in the bonding strength of BSA adhesive, a considerable decrease in the bonding strength of cyanoacrylate glue, and negligible adhesion of PGMA. Tests performed on BSA samples demonstrate that initial BSA concentration and final water content have a significant effect on the stress-strain behavior of the samples. PMID:18197367

  3. Mechanical properties of materials with nanometer scale microstructures

    SciTech Connect

    Nix, W.D.

    1991-07-01

    For the past two years we have been engaged in a program of research on the mechanical properties of a variety of new materials with nanometer scale microstructures. These materials have been developed recently using vapor phase synthesis techniques and are available in the form of compositionally-modulated (multilayered) thin film materials and ultrafine-grained (nanocrystalline) solids. They have interesting microstructures and mechanical properties that may lead to new applications for these materials. In this report we give a brief summary of some of the results we have obtained to date in the course of this research. Other, more detailed, descriptions of some of this work can be found in the papers that we have published. These are listed at the end of this report along with a listing of the oral presentations we have given. We report briefly on our studies of the elastic properties of metallic multilayered thin films. Using indentation and microbeam deflection techniques, we have found that Au/Ni multilayers do not show supermodulus effects, contrary to some previous reports based on bulge test results. However, we have discovered large and significant substrate interaction stresses in these films which depend systematically on the composition modulation wavelength. We believe that these residual stresses may have led to bulge testing errors which in turn led to erroneous reports of supermodulus effects.

  4. Influence of Ligament Properties on Tibiofemoral Mechanics in Walking.

    PubMed

    Smith, Colin R; Lenhart, Rachel L; Kaiser, Jarred; Vignos, Michael F; Thelen, Darryl G

    2016-02-01

    Computational knee models provide a powerful platform to investigate the effects of injury and surgery on functional knee behavior. The objective of this study was to use a multibody knee model to investigate the influence of ligament properties on tibiofemoral kinematics and cartilage contact pressures in the stance phase of walking. The knee model included 14 ligament bundles and articular cartilage contact acting across the tibiofemoral and patellofemoral joints. The knee was incorporated into a lower extremity musculoskeletal model and was used to simulate knee mechanics during the stance phase of normal walking. A Monte Carlo approach was employed to assess the influence of ligament stiffness and reference strain on knee mechanics. The anterior cruciate ligament (ACL), medial collateral ligament (MCL), and posterior capsule properties exhibited significant influence on anterior tibial translation at heel strike, with the ACL acting as the primary restraint to anterior translation in mid-stance. The MCL and lateral collateral ligament (LCL) exhibited the greatest influence on tibial rotation from heel strike through mid-stance. Simulated tibial plateau contact location was dependent on the ACL, MCL, and LCL properties, while pressure magnitudes were most dependent on the ACL. A decrease in ACL stiffness or reference strain significantly increased the average contact pressure in mid-stance, with the pressure migrating posteriorly on the medial tibial plateau. These ligament-dependent shifts in tibiofemoral cartilage contact during walking are potentially relevant to consider when investigating the causes of early-onset osteoarthritis following knee ligament injury and surgical treatment. PMID:26408997

  5. Dynamic and mechanical properties of supported lipid bilayers.

    PubMed

    Wu, Hsing-Lun; Tsao, Heng-Kwong; Sheng, Yu-Jane

    2016-04-21

    Supported lipid bilayers (SLBs) offer an excellent model system for investigating the physico-chemical properties of the cell membrane. In this work, dynamic and mechanical properties of SLBs are explored by dissipative particle dynamics simulations for lipids with different architectures (chain length, kink, and asymmetry associated with lipid tails). It is found that the lateral diffusivity (Dx) and flip-flop rate (FF) grow with increasing temperature in both gel and liquid phases and can be described by an Arrhenius-like expression. Three regimes can be clearly identified for symmetric and asymmetric saturated lipids but only two regimes are observed for kinked lipids. Both Dx and FF grow with decreasing tail length and increasing number of kinks. The stretching (KA) and apparent bending (KB) moduli exhibit concave upward curves with temperature and the minima are attained at Tm. In general, the minima of KA and KB decrease with the chain length and increase with number of kinks. The typical relation among the bending modulus, area stretching modulus, and bilayer thickness is still followed, KB = βKAh(2) and β is much smaller in the gel phase. The dynamic and mechanical properties of lipids with asymmetric tails are found to situate between their symmetric counterparts. PMID:27389237

  6. Enhancing the mechanical properties of single-crystal CVD diamond.

    PubMed

    Liang, Qi; Yan, Chih-Shiue; Meng, Yufei; Lai, Joseph; Krasnicki, Szczesny; Mao, Ho-Kwang; Hemley, Russell J

    2009-09-01

    Approaches for enhancing the strength and toughness of single-crystal diamond produced by chemical vapor deposition (CVD) at high growth rates are described. CVD processes used to grow single-crystal diamond in high density plasmas were modified to incorporate boron and nitrogen. Semi-quantitative studies of mechanical properties were carried out using Vickers indentation techniques. The introduction of boron in single-crystal CVD diamond can significantly enhance the fracture toughness of this material without sacrificing its high hardness (∼78 GPa). Growth conditions were varied to investigate its effect on boron incorporation and optical properties by means of photoluminescence, infrared, and ultraviolet-visible absorption spectroscopy. Boron can be readily incorporated into single-crystal diamond by the methods used, but with nitrogen addition, the incorporation of boron was hindered. The spectroscopic measurements indicate that nitrogen and boron coexist in the diamond structure, which helps explain the origin of the enhanced fracture toughness of this material. Further, low pressure/high temperature annealing can enhance the intrinsic hardness of single-crystal CVD diamond by a factor of two without appreciable loss in fracture toughness. This doping and post-growth treatment of diamond may lead to new technological applications that require enhanced mechanical properties of diamond. PMID:21832321

  7. Effects of prestresses on mechanical properties of isotropic graphite materials

    NASA Astrophysics Data System (ADS)

    Oku, T.; Kurumada, A.; Imamura, Y.; Kawamata, K.; Shiraishi, M.

    1998-10-01

    Graphite materials which are used for plasma facing components and other components are subjected to stresses due to the high heat flux from the fusion plasma. Some mechanical properties of graphite materials can change due to the prestresses. The property changes should be considered for the design of the plasma facing components. The purpose of this study is to examine the effects of prestresses on the mechanical properties of isotropic graphite materials. Compressive prestresses were applied to two kinds of isotropic fine-grained graphites (IG-430 and IG-11) at 298 K (both), 1873 K (IG-11), 2273 K (IG-11) and 2283 K (IG-430). As a result, the decrease in Young's modulus for IG-430 due to high-temperature prestressing was 56% which was much larger than the 6.4% that was due to prestressing at 298 K. The results for IG-11 were the same as those for IG-430 graphite. This finding was considered to be due primarily to a difference in degree of the preferred orientation of crystallites in the graphite on the basis of the Bacon anisotropy factor (BAF) obtained from X-ray diffraction measurement of the prestressed specimens. Furthermore, high-temperature compressive prestressing produced an increase in the strength of the isotropic graphite, although room temperature prestressing produced no such effect. The results obtained here suggest that the isotropic graphite which is subjected to high-temperature compressive stresses can become anisotropic in service.

  8. Local Mechanical Properties by Atomic Force Microscopy Nanoindentations

    NASA Astrophysics Data System (ADS)

    Tranchida, Davide; Piccarolo, Stefano

    The analysis of mechanical properties on a nanometer scale is a useful tool for combining information concerning texture organization obtained by microscopy with the properties of individual components. Moreover, this technique promotes the understanding of the hierarchical arrangement in complex natural materials as well in the case of simpler morphologies arising from industrial processes. Atomic Force Microscopy (AFM) can bridge morphological information, obtained with outstanding resolution, to local mechanical properties. When performing an AFM nanoindentation, the rough force curve, i.e., the plot of the voltage output from the photodiode vs. the voltage applied to the piezo-scanner, can be translated into a curve of the applied load vs. the penetration depth after a series of preliminary determinations and calibrations. However, the analysis of the unloading portion of the force curves collected for polymers does not lead to a correct evaluation of Young's modulus. The high slope of the unloading curves is not linked to an elastic behavior, as would be expected, but rather to a viscoelastic effect. This can be argued on the basis that the unloading curves are superimposed on the loading curves in the case of an ideal elastic behavior, as for rubbers, or generally in the case of materials with very short relaxation times. In contrast, when the relaxation time of the sample is close to or even much larger than the indentation time scale, very high slopes are recorded.

  9. Multi-scale mechanical and transport properties of a hydrogel.

    PubMed

    Salahshoor, Hossein; Rahbar, Nima

    2014-09-01

    In this paper, molecular dynamic simulation was used to study the effect of water on the equilibrated structure and mechanical properties of cross-linked hydrogel at multiple scales. The hydrogel consisted of Polyethylene glycol diglycidyl ether (PEGDGE) as epoxy and the Jeffamine, poly-oxy-alkylene-amines, as curing agent. The results for systems with various water contents indicated that the cross-links were more hydrophilic within the hydrogel structure. Effects of cross-linking on the transport properties were also investigated by computing diffusion coefficients of water molecules. A new Coarse-Grained (CG) scheme for hydrogels is proposed, and validated by comparing the transport properties with the all-atom method, demonstrating the capability of the model to capture the correct dynamic evolution of the system. The all-atom model of the hydrogel was mapped to the CG model using the MARTINI force field. This method resulted in a more realistic representation of the stiffness of the system, compared to the previous experimental studies in the literature. The variation of the stiffness of the hydrogel as a function of the water content showed that 40% water content is the optimal value for mechanical performance of the hydrogel. PMID:24967978

  10. Dynamic and mechanical properties of supported lipid bilayers

    NASA Astrophysics Data System (ADS)

    Wu, Hsing-Lun; Tsao, Heng-Kwong; Sheng, Yu-Jane

    2016-04-01

    Supported lipid bilayers (SLBs) offer an excellent model system for investigating the physico-chemical properties of the cell membrane. In this work, dynamic and mechanical properties of SLBs are explored by dissipative particle dynamics simulations for lipids with different architectures (chain length, kink, and asymmetry associated with lipid tails). It is found that the lateral diffusivity (Dx) and flip-flop rate (FF) grow with increasing temperature in both gel and liquid phases and can be described by an Arrhenius-like expression. Three regimes can be clearly identified for symmetric and asymmetric saturated lipids but only two regimes are observed for kinked lipids. Both Dx and FF grow with decreasing tail length and increasing number of kinks. The stretching (KA) and apparent bending (KB) moduli exhibit concave upward curves with temperature and the minima are attained at Tm. In general, the minima of KA and KB decrease with the chain length and increase with number of kinks. The typical relation among the bending modulus, area stretching modulus, and bilayer thickness is still followed, KB = βKAh2 and β is much smaller in the gel phase. The dynamic and mechanical properties of lipids with asymmetric tails are found to situate between their symmetric counterparts.

  11. Metallurgical Mechanisms Controlling Mechanical Properties of Aluminum Alloy 2219 Produced by Electron Beam Freeform Fabrication

    NASA Technical Reports Server (NTRS)

    Domack, Marcia S.; Tainger, Karen M.

    2006-01-01

    The electron beam freeform fabrication (EBF3) layer-additive manufacturing process has been developed to directly fabricate complex geometry components. EBF3 introduces metal wire into a molten pool created on the surface of a substrate by a focused electron beam. Part geometry is achieved by translating the substrate with respect to the beam to build the part one layer at a time. Tensile properties demonstrated for electron beam deposited aluminum and titanium alloys are comparable to wrought products, although the microstructures of the deposits exhibit cast features. Understanding the metallurgical mechanisms controlling mechanical properties is essential to maximizing application of the EBF3 process. Tensile mechanical properties and microstructures were examined for aluminum alloy 2219 fabricated over a range of EBF3 process variables. Unique microstructures were observed within the deposited layers and at interlayer boundaries, which varied within the deposit height due to microstructural evolution associated with the complex thermal history experienced during subsequent layer deposition. Microstructures exhibited irregularly shaped grains with interior dendritic structures, described based on overall grain size, morphology, distribution, and dendrite spacing, and were correlated with deposition parameters. Fracture features were compared with microstructural elements to define fracture paths and aid in definition of basic processing-microstructure-property correlations.

  12. Mechanical Properties and Fracture Behavior of Nanoporous Au

    SciTech Connect

    Biener, J; Hodge, A M; Wang, Y M; Hayes, J R; Hamza, A V

    2005-06-16

    Nanoporous metals have recently attracted considerable interest fueled by potential sensor and actuator applications. From a material science point of view, one of the key issues in this context is the synthesis of nanoporous metals with both high tensile and compressive strength. Nanoporous gold (np-Au) has been suggested as a candidate material for this application due to its monolithic character. The material can be synthesized by electrochemically-driven dealloying of Ag-Au alloys, and exhibits an open sponge-like structure of interconnecting ligaments with a typical pore size distribution on the nanometer length scale. However, besides the observation of a ductile-brittle transition very little is known about the mechanical behavior of this material. Here, we present our results regarding the mechanical properties and the fracture behavior of np-Au. Depth-sensing nanoindentation reveals that the yield strength of np-Au is almost one order of magnitude higher than the value predicted by scaling laws developed for macroscopic open-cell foams. The unexpectedly high value of the yield strength indicates the presence of a distinct size effect of the mechanical properties due to the sub-micron dimensions of the ligaments, thus potentially opening a door to a new class of high yield strength--low density materials. The failure mechanism of np-Au under tensile stress was evaluated by microscopic examination of fracture surfaces using scanning electron microscopy. On a macroscopic level, np-Au is a very brittle material. However, microscopically np-Au is very ductile as ligaments strained by as much as 200% can be observed in the vicinity of crack tips. Cell-size effects on the microscopic failure mechanism were studied by annealing experiments whereby increasing the typical pore size/ligament diameter from {approx}100 nm to {approx}1{micro}m.

  13. Novel porous soy protein-based blend structures for biomedical applications: Microstructure, mechanical, and physical properties.

    PubMed

    Barkay-Olami, Hilla; Zilberman, Meital

    2016-08-01

    Use of naturally derived materials for biomedical applications is steadily increasing. Soy protein has advantages over various types of natural proteins employed for biomedical applications due to its low price, nonanimal origin, and relatively long storage time and stability. In the current study, blends of soy protein with other polymers (gelatin, alginate, pectin, polyvinyl alcohol, and polyethylene glycol) were developed and studied. The mechanical tensile properties of dense films were studied in order to select the best secondary polymer for porous three-dimensional structures. The porous soy-gelatin and soy-alginate structures were then studied for physical properties, degradation behavior, and microstructure. The results show that these blends can be assembled into porous three-dimensional structures by combining chemical crosslinking with freeze-drying. The soy-alginate blends are advantageous over soy-gelatin blends, demonstrated better stability, and degradation time along with controlled swelling behavior due to more effective crosslinking and higher water uptake than soy-gelatin blends. Water vapor transmission rate experiments showed that all porous blend structures were in the desired range for burn treatment [2000-2500 g/(m(2) d)] and can be controlled by the crosslinking process. We conclude that these novel porous three-dimensional structures have a high potential for use as scaffolds for tissue engineering, especially for skin regeneration applications. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1109-1120, 2016. PMID:26038233

  14. Changes in cellular mechanical properties during onset or progression of colorectal cancer

    PubMed Central

    Ciasca, Gabriele; Papi, Massimiliano; Minelli, Eleonora; Palmieri, Valentina; De Spirito, Marco

    2016-01-01

    Colorectal cancer (CRC) development represents a multistep process starting with specific mutations that affect proto-oncogenes and tumour suppressor genes. These mutations confer a selective growth advantage to colonic epithelial cells that form first dysplastic crypts, and then malignant tumours and metastases. All these steps are accompanied by deep mechanical changes at the cellular and the tissue level. A growing consensus is emerging that such modifications are not merely a by-product of the malignant progression, but they could play a relevant role in the cancer onset and accelerate its progression. In this review, we focus on recent studies investigating the role of the biomechanical signals in the initiation and the development of CRC. We show that mechanical cues might contribute to early phases of the tumour initiation by controlling the Wnt pathway, one of most important regulators of cell proliferation in various systems. We highlight how physical stimuli may be involved in the differentiation of non-invasive cells into metastatic variants and how metastatic cells modify their mechanical properties, both stiffness and adhesion, to survive the mechanical stress associated with intravasation, circulation and extravasation. A deep comprehension of these mechanical modifications may help scientist to define novel molecular targets for the cure of CRC. PMID:27621568

  15. Changes in cellular mechanical properties during onset or progression of colorectal cancer.

    PubMed

    Ciasca, Gabriele; Papi, Massimiliano; Minelli, Eleonora; Palmieri, Valentina; De Spirito, Marco

    2016-08-28

    Colorectal cancer (CRC) development represents a multistep process starting with specific mutations that affect proto-oncogenes and tumour suppressor genes. These mutations confer a selective growth advantage to colonic epithelial cells that form first dysplastic crypts, and then malignant tumours and metastases. All these steps are accompanied by deep mechanical changes at the cellular and the tissue level. A growing consensus is emerging that such modifications are not merely a by-product of the malignant progression, but they could play a relevant role in the cancer onset and accelerate its progression. In this review, we focus on recent studies investigating the role of the biomechanical signals in the initiation and the development of CRC. We show that mechanical cues might contribute to early phases of the tumour initiation by controlling the Wnt pathway, one of most important regulators of cell proliferation in various systems. We highlight how physical stimuli may be involved in the differentiation of non-invasive cells into metastatic variants and how metastatic cells modify their mechanical properties, both stiffness and adhesion, to survive the mechanical stress associated with intravasation, circulation and extravasation. A deep comprehension of these mechanical modifications may help scientist to define novel molecular targets for the cure of CRC. PMID:27621568

  16. Mechanical Property of HVOF Inconel 718 Coating for Aeronautic Repair

    NASA Astrophysics Data System (ADS)

    Lyphout, Christophe; Fasth, Angelica; Nylen, Per

    2014-02-01

    The module of elasticity is one of the most important mechanical properties defining the strength of a material which is a prerequisite to design a component from its early stage of conception to its field of application. When a material is to be thermally sprayed, mechanical properties of the deposited layers differ from the bulk material, mainly due to the anisotropy of the highly textured coating microstructure. The mechanical response of the deposited layers significantly influences the overall performance of the coated component. It is, therefore, of importance to evaluate the effective module of elasticity of the coating. Conventional experimental methods such as microindentation, nanoindentation and four-point bending tests have been investigated and their results vary significantly, mainly due to inhomogeneous characteristics of the coating microstructure. Synchrotron radiation coupled with a tensile test rig has been proposed as an alternative method to determine the coating anisotropic elastic behavior dependence on crystallographic orientations. The investigation was performed on Inconel 718 (IN718) HVOF coatings sprayed on IN718 substrates. Combining these experimental techniques yield a deeper understanding of the nature of the HVOF coating Young's modulus and thus a tool for Design Practice for repair applications.

  17. Study on Thermal and Mechanical Properties of EPDM Insulation

    NASA Astrophysics Data System (ADS)

    Zhang, Zhong-Shui; Xu, Jin-Sheng; Chen, Xiong; Jiang, Jing

    As the most common insulation material of solid rocket motors, thermal and mechanical properties of ethylene propylene diene monomer (EPDM) composite are inspected in the study. Referring to the results of thermogravimetric analysis (TGA), composition and morphology of EPDM composite in different thermal degradation degree are investigated by scanning electron microscope (SEM) to inspect the mechanism of thermal insulation. Mechanical properties of EPDM composite in the state of pyrolysis are investigated by uniaxial tensile tests. At the state of initial pyrolysis, composite belongs to the category of hyperelastic-viscoelastic material. The tendency of tensile strength increased and elongation decreased with increasing of heating temperature. Composite behaves as the linear rule at the state of late pyrolysis, which belongs to the category of bittle. The elasticity modulus of curves are almost the same while the heating temperature ranges from 200°C to 300°C, and then gradually go down. The tensile strength of pyrolytic material reach the highest at the heating temperature of 300°C, and the virgin material has the largest elongation.

  18. Probing mechanical properties of living cells by magnetopneumography.

    PubMed

    Möller, W; Takenaka, S; Rust, M; Stahlhofen, W; Heyder, J

    1997-01-01

    Magnetopneumography (MPG) has been used to study long-term particle clearance from human lungs as well as cellular motility of pulmonary macrophages (PMs). This study describes an extension of the method enabling the measurement of mechanical properties of PM cells in vivo. Ferromagnetic microparticles are inhaled and then retained in the alveolar region of the lungs, where they are phagocytized within hours by PMs. The magnetic particles can be rotated in weak magnetic fields, and the response to this twisting shear (force) is detected as a macroscopic magnetic field producing a measure of cytoskeletal mechanics. Cytoplasmic viscosity is very high compared with that of water and is strongly non-Newtonian. Under rotational stresses from 0.4 to 6.4 Pa, it acts like a pseudoplastic fluid showing a characteristic shear rate dependence. The viscosity as well as the stiffness of the cytoskeleton increases with increasing shear stress as seems typical for living tissue and evidence for an intact cytoskeletal matrix. The particle recoil as measured by the amount of recoverable strain following a short twisting force describes a cytoplasmic elasticity that depends on both level and duration of stress. These investigations on the mechanical properties of living human cells are promising and should lead to better understanding of cellular dysfunction in disease as well as pathways for drug administration. PMID:10174196

  19. Mechanical properties of thin-wall ductile iron

    SciTech Connect

    Schrems, Karol K.; Dogan, Omer N.; Hawk, Jeffrey A.; Druschitz, A.P.

    2000-10-01

    The use of cast iron in automotive applications in this era of increasing fuel efficiency requires the ability to cast very thin sections (2-7 mm). Although thin-wall iron castings have been produced, difficulty arises in predicting the mechanical properties of these castings because mechanical behavior is closely related to thickness, which in turn is a direct consequence of the section cooling rate. Experiments relating casting thickness with ultimate tensile strength, elongation, reduction in area, and hardness were performed. An inverse relationship was found between ultimate tensile strength and thickness. Elongation was found to depend only on the thickness of the sample and approached zero as the thickness of the sample decreased below 1.5 mm. Percent reduction in area was found to depend linearly on thickness. Although average hardness also correlated with the inverse of thickness, it was not found to be a useful measure of ultimate tensile strength. The results of this study show that cooling rate of the thin wall casting very much affects the mechanical properties.

  20. Mechanical properties and modeling of seal-forming lithologies

    SciTech Connect

    Kronenberg, A.K.; Russell, J.E.; Carter, N.L.; Ibanez, W.; Mazariegos, R.

    1992-04-01

    Both rocksalt and shale lithologies are actively deformed in response to gravitational loads associated with deposition, and both form effective seals to petroleum and natural gas. Thus, the shapes of seal-forming units, and the nature of fractures and faults that may breach them depend upon either the mechanical properties of salt or those of shale, and the loading histories to which they have been subjected. The objectives of this research include the determination of the mechanical properties under controlled conditions of well-characterized shales, and the numerical modeling of rocksalt (and eventually shale) formations using laboratory-based rheologies. Progress has been made towards these goals over this project period, both in our experimental program on shale deformation and model development for the growth of salt diapirs. The mechanical anisotropy of an illite-bearing shale from Louisiana has been determined and related to the preferred orientation and distribution of clays. Its strength in the absence of pore fluids has been determined at confining pressures of up to 250 MPa and at high pressure we have investigated the effects of deformation rate and temperature. A numerical finite difference code has been developed to solve the incompressible Navier-Stokes equations and validated using a two- layer linear viscous model for which analytic solutions are available. Although the code has only been validated for the linear viscous case, it is capable of solving for highly nonlinear constitutive laws as well as solving for arbitrary interfaces between the salt and overburden.

  1. Atomic vacancies significantly degrade the mechanical properties of phosphorene

    NASA Astrophysics Data System (ADS)

    Sha, Zhen-Dong; Pei, Qing-Xiang; Zhang, Ying-Yan; Zhang, Yong-Wei

    2016-08-01

    Due to low formation energies, it is very easy to create atomic defects in phosphorene during its fabrication process. How these atomic defects affect its mechanical behavior, however, remain unknown. Here, we report on a systematic study of the effect of atomic vacancies on the mechanical properties and failure behavior of phosphorene using molecular dynamics simulations. It is found that atomic vacancies induce local stress concentration and cause early bond-breaking, leading to a significant degradation of the mechanical properties of the material. More specifically, a 2% concentration of randomly distributed mono-vacancies is able to reduce the fracture strength by ∼40%. An increase in temperature from 10 to 400 K can further deteriorate the fracture strength by ∼60%. The fracture strength of defective phosphorene is also found to be affected by defect distribution. When the defects are patterned in a line, the reduction in fracture strength greatly depends on the tilt angle and the loading direction. Furthermore, we find that di-vacancies cause an even larger reduction in fracture strength than mono-vacancies when the loading is in an armchair direction. These findings provide important guidelines for the structural design of phosphorene in future applications.

  2. Mechanical properties for irradiated face-centred cubic nanocrystalline metals

    PubMed Central

    Xiao, X. Z.; Song, D. K.; Chu, H. J.; Xue, J. M.; Duan, H. L.

    2015-01-01

    In this paper, a self-consistent plasticity theory is proposed to model the mechanical behaviours of irradiated face-centred cubic nanocrystalline metals. At the grain level, a tensorial crystal model with both irradiation and grain size effects is applied for the grain interior (GI), whereas both grain boundary (GB) sliding with irradiation effect and GB diffusion are considered in modelling the behaviours of GBs. The elastic-viscoplastic self-consistent method with considering grain size distribution is developed to transit the microscopic behaviour of individual grains to the macroscopic properties of nanocrystals (NCs). The proposed theory is applied to model the mechanical properties of irradiated NC copper, and the feasibility and efficiency have been validated by comparing with experimental data. Numerical results show that: (i) irradiation-induced defects can lead to irradiation hardening in the GIs, but the hardening effect decreases with the grain size due to the increasing absorption of defects by GBs. Meanwhile, the absorbed defects would make the GBs softer than the unirradiated case. (ii) There exists a critical grain size for irradiated NC metals, which separates the grain size into the irradiation hardening dominant region (above the critical size) and irradiation softening dominant region (below the critical size). (iii) The distribution of grain size has a significant influence on the mechanical behaviours of both irradiated and unirradiated NCs. The proposed model can offer a valid theoretical foundation to study the irradiation effect on NC materials. PMID:27547091

  3. Atomic vacancies significantly degrade the mechanical properties of phosphorene.

    PubMed

    Sha, Zhen-Dong; Pei, Qing-Xiang; Zhang, Ying-Yan; Zhang, Yong-Wei

    2016-08-01

    Due to low formation energies, it is very easy to create atomic defects in phosphorene during its fabrication process. How these atomic defects affect its mechanical behavior, however, remain unknown. Here, we report on a systematic study of the effect of atomic vacancies on the mechanical properties and failure behavior of phosphorene using molecular dynamics simulations. It is found that atomic vacancies induce local stress concentration and cause early bond-breaking, leading to a significant degradation of the mechanical properties of the material. More specifically, a 2% concentration of randomly distributed mono-vacancies is able to reduce the fracture strength by ∼40%. An increase in temperature from 10 to 400 K can further deteriorate the fracture strength by ∼60%. The fracture strength of defective phosphorene is also found to be affected by defect distribution. When the defects are patterned in a line, the reduction in fracture strength greatly depends on the tilt angle and the loading direction. Furthermore, we find that di-vacancies cause an even larger reduction in fracture strength than mono-vacancies when the loading is in an armchair direction. These findings provide important guidelines for the structural design of phosphorene in future applications. PMID:27345189

  4. Brief mechanical ventilation impacts airway cartilage properties in neonatal lambs

    PubMed Central

    Kim, Minwook; Pugarelli, Joan; Miller, Thomas L.; Wolfson, Marla R.; Dodge, George R.; Shaffer, Thomas H.

    2012-01-01

    Ultrasound imaging allows in vivo assessment of tracheal kinetics and cartilage structure. To date, the impact of mechanical ventilation (MV) on extracellular matrix (ECM) in airway cartilage is unclear, but an indication of its functional and structural change may support the development of protective therapies. The objective of this study was to characterize changes in mechanical properties of the neonatal airway during MV with alterations in cartilage ECM. Trachea segments were isolated in a neonatal lamb model; ultrasound dimensions and pressure-volume relationships were measured on sham (no MV; n = 6) and MV (n = 7) airways for 4 h. Tracheal cross-sections were harvested at 4 h, tissues were fixed and stained, and Fourier transform infrared imaging spectroscopy (FT-IRIS) was performed. Over 4 h of MV, bulk modulus (28%) and elastic modulus (282%) increased. The MV tracheae showed higher collagen, proteoglycan content, and collagen integrity (new tissue formation); whereas no changes were seen in the controls. These data are clinically relevant in that airway properties can be correlated with MV and changes in cartilage extracellular matrix. Mechanical ventilation increases the in vivo dimensions of the trachea, and is associated with evidence of airway tissue remodeling. Injury to the neonatal airway from MV may have relevance for the development of tracheomalacia. We demonstrated active airway tissue remodeling during MV using a FT-IRIS technique which identifies changes in ECM. PMID:22170596

  5. Effect of Rolling Temperature and Ultrafast Cooling Rate on Microstructure and Mechanical Properties of Steel Plate

    NASA Astrophysics Data System (ADS)

    Ye, Qibin; Liu, Zhenyu; Yang, Yu; Wang, Guodong

    2016-07-01

    Microstructure can vary significantly through thickness after ultrafast cooling of rolled steel plates, impacting their mechanical properties. This study examined the microstructure, microstructural banding at centerline, and mechanical properties through thickness for different ultrafast cooling conditions and rolling temperatures. One set of steels (UC1 and UC2) were ultrafast-cooled (UFC) at 40 K/s after finish rolling at 1223 K and 1193 K (950 °C and 910 °C), respectively, while the second set (LC) was cooled by laminar cooling at 17 K/s after finish rolling at 1238 K (965 °C). UFC produced microstructural variation through thickness; highly dislocated lath-type bainitic ferrite was formed near the surface, whereas the primary microstructure was acicular ferrite and irregular polygonal ferrite in the interior of UC1 and UC2 steels, respectively. However, UFC has the advantage of suppression of microstructural banding in centerline segregation regions. The ferrite grain size in both UFC-cooled steels was refined to ~5 μm, increasing strength and toughness. The optimum combination of properties was obtained in UC2 steel with appropriate low finish rolling temperature, being attributed to the distinct microstructure resulting from work-hardened austenite before UFC.

  6. Measurement of mechanical properties of homogeneous tissue with ultrasonically induced shear waves

    NASA Astrophysics Data System (ADS)

    Greenleaf, James F.; Chen, Shigao

    2007-03-01

    Fundamental mechanical properties of tissue are altered by many diseases. Regional and systemic diseases can cause changes in tissue properties. Liver stiffness is caused by cirrhosis and fibrosis. Vascular wall stiffness and tone are altered by smoking, diabetes and other diseases. Measurement of tissue mechanical properties has historically been done with palpation. However palpation is subjective, relative, and not quantitative or reproducible. Elastography in which strain is measured due to stress application gives a qualitative estimate of Young's modulus at low frequency. We have developed a method that takes advantage of the fact that the wave equation is local and shear wave propagation depends only on storage and loss moduli in addition to density, which does not vary much in soft tissues. Our method is called shearwave dispersion ultrasonic velocity measurement (SDUV). The method uses ultrasonic radiation force to produce repeated motion in tissue that induces shear waves to propagate. The shear wave propagation speed is measured with pulse echo ultrasound as a function of frequency of the shear wave. The resulting velocity dispersion curve is fit with a Voight model to determine the elastic and viscous moduli of the tissue. Results indicate accurate and precise measurements are possible using this "noninvasive biopsy" method. Measurements in beef along and across the fibers are consistent with the literature values.

  7. Mechanical property degradation of graphite/polyimide composites after exposure to moisture or shuttle orbiter fluids

    NASA Technical Reports Server (NTRS)

    Lisagor, W. B.

    1979-01-01

    The effects of moisture exposure on the mechanical properties of graphite polyimide systems are presented. The mechanism of the degradation and the magnitude of the affect associated with specific mechanical properties is investigated. An experimental effort involving exposure to selected environmental variables and subsequent mechanical property testing and analysis is included.

  8. Thermal and mechanical treatments for nickel and some nickel-base alloys: Effects on mechanical properties

    NASA Technical Reports Server (NTRS)

    Hall, A. M.; Beuhring, V. F.

    1972-01-01

    This report deals with heat treating and working nickel and nickel-base alloys, and with the effects of these operations on the mechanical properties of the materials. The subjects covered are annealing, solution treating, stress relieving, stress equalizing, age hardening, hot working, cold working, combinations of working and heat treating (often referred to as thermomechanical treating), and properties of the materials at various temperatures. The equipment and procedures used in working the materials are discussed, along with the common problems that may be encountered and the precautions and corrective measures that are available.

  9. Layered nanocomposites inspired by the structure and mechanical properties of nacre.

    PubMed

    Wang, Jianfeng; Cheng, Qunfeng; Tang, Zhiyong

    2012-02-01

    Nacre (mother-of-pearl), made of inorganic and organic constituents (95 vol% aragonite calcium carbonate (CaCO(3)) platelets and 5 vol% elastic biopolymers), possesses a unique combination of remarkable strength and toughness, which is compatible for conventional high performance materials. The excellent mechanical properties are related to its hierarchical structure and precisely designed organic-inorganic interface. The rational design of aragonite platelet strength, aspect ratio of aragonite platelets, and interface strength ensures that the strength of nacre is maximized under platelet pull-out failure mode. At the same time, the synergy of strain hardening mechanisms acting over multiple scales results in platelets sliding on one another, and thus maximizes the energy dissipation of viscoplastic biopolymers. The excellent integrated mechanical properties with hierarchical structure have inspired chemists and materials scientists to develop biomimetic strategies for artificial nacre materials. This critical review presents a broad overview of the state-of-the-art work on the preparation of layered organic-inorganic nanocomposites inspired by nacre, in particular, the advantages and disadvantages of various biomimetic strategies. Discussion is focused on the effect of the layered structure, interface, and component loading on strength and toughness of nacre-mimic layered nanocomposites (148 references). PMID:21959863

  10. Mechanical Properties of Solid-State Recycled 4xxx Aluminum Alloy Chips

    NASA Astrophysics Data System (ADS)

    Tokarski, Tomasz

    2016-06-01

    The direct production of aluminum from bauxite ores is known to be a very energetic-intensive operation compared to other metallurgical processes. Due to energy issues and the rapid increase in aluminum demand, new kinds of aluminum production processes are required. Aluminum waste recycling, which has an advantage of lowering the cost of electric power consumption, is considered to be an alternative route for material manufacturing. In this work, the way of reusing aluminum EN-AC 44000 alloy scraps by hot extrusion was presented. Metal chips of different sizes and morphology were cold compacted into billet form and then hot extruded. Mechanical properties investigations combined with microstructure observations were performed. Mechanical anisotropy behavior of material was evaluated on the base of tensile test experiments performed on samples machined at 0°, 45°, and 90°, respectively, to the extrusion direction. It was found that the initial size of the chips has an influence on the mechanical properties of the received profiles. Samples produced from fine chips revealed higher tensile strength in comparison to larger chips, which can be attributed to a refined microstructure containing fine, hard Si particles and Fe-rich intermetallic phases. Finally, it was found that anisotropic behavior of chip-based profiles is similar to conventionally cast and extruded materials which prove good bonding quality between chips.

  11. Mechanical Properties of ZnSe for the FEANICS Module

    NASA Technical Reports Server (NTRS)

    Salem, Jon

    2006-01-01

    Mechanical and physical properties of ZnSe windows to be used with the FEANICS (Flow Enclosure Accommodating Novel Investigations in Combustion of Solids) experiments were measured in order to determine design allowables. In addition, the literature on crack growth properties was summarized. The average Young's modulus, Poisson's ratio, equibiaxial fracture strength, flaw size, grain size, Knoop hardness, Vicker's hardness, and branching constant were 74.3 +/- 0.1 GPa, 0.31, 57.8 +/- 6.5 MPa, 21 4 mm, 43 +/- 9 micron, 0.97 +/- 0.02 GPa, 0.97 +/- 0.02 GPa, and 1.0 +/- 0.1 MPam(exp 0.5), respectively. The properties of current ZnSe made by chemical vapor deposition are in good agreement with those measured in the 1970's. The hardness of CVD ZnSe windows is about one twentieth of the sapphire window being replaced, and about one-sixth of that of window glass. Thus the ZnSe window must be handled with great care. The large grain size relative to the inherent crack size implies the need to use single crystal crack growth properties in the design process. In order to determine the local failure stresses in one of the test specimens, a solution for the stresses between the support ring and the edge of a circular plate load between concentric rings was derived.

  12. Double-peak mechanical properties of carbon-nanotube fibers.

    PubMed

    Zhao, Jingna; Zhang, Xiaohua; Di, Jiangtao; Xu, Geng; Yang, Xiaojie; Liu, Xiangyang; Yong, Zhenzhong; Chen, Minghai; Li, Qingwen

    2010-11-22

    The introduction of twist during the spinning of carbon nanotubes from their arrays (forests) has been widely applied in making ultrastrong, stiff, and lightweight nanotube fibers. Here, for the first time, an important observation of a double-peak behavior of the tensile properties, as a function of the twist angle, that is different from the single peak of traditional fibers is reported. Raman spectra show that the new peak arises from the collapse of nanotubes, showing a strong "nano" element in applying the ancient draw-and-twist technique, besides the downsizing. A qualitative continuum model is also presented to describe the collapse-induced enhancement as well as traditional fibers. Our combined experimental and theoretical studies indicate the direction of full utilization of the nano element in improving the mechanical properties of nanotube fibers. PMID:20941775

  13. Thermodynamics and statistical mechanics. [thermodynamic properties of gases

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The basic thermodynamic properties of gases are reviewed and the relations between them are derived from the first and second laws. The elements of statistical mechanics are then formulated and the partition function is derived. The classical form of the partition function is used to obtain the Maxwell-Boltzmann distribution of kinetic energies in the gas phase and the equipartition of energy theorem is given in its most general form. The thermodynamic properties are all derived as functions of the partition function. Quantum statistics are reviewed briefly and the differences between the Boltzmann distribution function for classical particles and the Fermi-Dirac and Bose-Einstein distributions for quantum particles are discussed.

  14. Low-temperature mechanical properties of glass/epoxy laminates

    SciTech Connect

    Reed, R. P.; Madhukar, M.; Thaicharoenporn, B.; Martovetsky, N. N.

    2014-01-27

    Selected mechanical properties of glass/epoxy laminate candidates for use in the electrical turn and ground insulation of the ITER Central solenoid (CS) modules were measured. Short-beam shear and flexural tests have been conducted on various E-glass cloth weaves/epoxy laminates at 295 and 77 K. Types of glass weave include 1581, 7500, 7781, and 38050, which represent both satin and plain weaves. The epoxy, planned for use for vacuum-pressure impregnation of the CS module, consists of an anhydride-cured bisphenol F resin system. Inter-laminar shear strength, flexural elastic modulus, and flexural strength have been measured. The data indicate that these properties are dependent on the volume percent of glass. Short-beam shear strength was measured as a function of the span-to-thickness ratio for all laminates at 77 K. Comprehensive fractography was conducted to obtain the failure mode of each short-beam shear test sample.

  15. Low-temperature mechanical properties of glass/epoxy laminates

    NASA Astrophysics Data System (ADS)

    Reed, R. P.; Madhukar, M.; Thaicharoenporn, B.; Martovetsky, N. N.

    2014-01-01

    Selected mechanical properties of glass/epoxy laminate candidates for use in the electrical turn and ground insulation of the ITER Central solenoid (CS) modules were measured. Short-beam shear and flexural tests have been conducted on various E-glass cloth weaves/epoxy laminates at 295 and 77 K. Types of glass weave include 1581, 7500, 7781, and 38050, which represent both satin and plain weaves. The epoxy, planned for use for vacuum-pressure impregnation of the CS module, consists of an anhydride-cured bisphenol F resin system. Inter-laminar shear strength, flexural elastic modulus, and flexural strength have been measured. The data indicate that these properties are dependent on the volume percent of glass. Short-beam shear strength was measured as a function of the span-to-thickness ratio for all laminates at 77 K. Comprehensive fractography was conducted to obtain the failure mode of each short-beam shear test sample.

  16. Mechanical properties of nacre and highly mineralized bone.

    PubMed Central

    Currey, J D; Zioupos, P; Davies, P; Casino, A

    2001-01-01

    We compared the mechanical properties of 'ordinary' bovine bone, the highly mineralized bone of the rostrum of the whale Mesoplodon densirostris, and mother of pearl (nacre) of the pearl oyster Pinctada margaritifera. The rostrum and the nacre are similar in having very little organic material. However, the rostral bone is much weaker and more brittle than nacre, which in these properties is close to ordinary bone. The ability of nacre to outperform rostral bone is the result of its extremely well-ordered microstructure, with organic material forming a nearly continuous jacket round all the tiny aragonite plates, a design well adapted to produce toughness. In contrast, in the rostrum the organic material, mainly collagen, is poorly organized and discontinuous, allowing the mineral to join up to form, in effect, a brittle stony material. PMID:12123292

  17. Mechanical Properties of High Strength Al-Mg Alloy Sheet

    NASA Astrophysics Data System (ADS)

    Choi, Bong-Jae; Hong, Kyung-Eui; Kim, Young-Jig

    The aim of this research is to develop the high strength Al alloy sheet for the automotive body. For the fabrication Al-Mg alloy sheet, the composition of alloying elements was designed by the properties database and CALPHAD (Calculation Phase Diagram) approach which can predict the phases during solidification using thermodynamic database. Al-Mg alloys were designed using CALPHAD approach according to the high content of Mg with minor alloying elements. After phase predictions by CALPHAD, designed Al-Mg alloys were manufactured. Addition of Mg in Al melts were protected by dry air/Sulphur hexafluoride (SF6) mixture gas which can control the severe Mg ignition and oxidation. After rolling procedure of manufactured Al-Mg alloys, mechanical properties were examined with the variation of the heat treatment conditions.

  18. Mechanical properties of open-pore titanium foam.

    PubMed

    Imwinkelried, Thomas

    2007-06-15

    Open-pore titanium foams are produced using the so-called space holder method. The mechanical properties of titanium foams with porosities of 50-80% are studied. The stiffness and yield strength of the foams are found to encompass the property range between cancellous bone and cortical bone. The analyzed foams are found to be anisotropic due to the use of nonspherical space holder particles which rearrange during the compaction of the powder mixture. The titanium foams are stronger perpendicular to the compaction direction and weaker along the compaction axis. In view of the application as an implant material in the lumbar spine, an intermediate porosity of 60-65% is analyzed more in detail. The typical yield strength of titanium foam with 62.5% porosity is above 60 MPa in compression, bending, and tension. Stiffness values vary with the testing method from 7-14 GPa. PMID:17252551

  19. Mechanical property evaluation of natural fiber coir composite

    SciTech Connect

    Harish, S.; Michael, D. Peter; Bensely, A. Lal, D. Mohan; Rajadurai, A.

    2009-01-15

    The fiber which serves as a reinforcement in reinforced plastics may be synthetic or natural. Past studies show that only artificial fibers such as glass, carbon etc., have been used in fiber-reinforced plastics. Although glass and other synthetic fiber-reinforced plastics possess high specific strength, their fields of application are very limited because of their inherent higher cost of production. In this connection, an investigation has been carried out to make use of coir, a natural fiber abundantly available in India. Natural fibers are not only strong and lightweight but also relatively very cheap. In the present work, coir composites are developed and their mechanical properties are evaluated. Scanning electron micrographs obtained from fractured surfaces were used for a qualitative evaluation of the interfacial properties of coir/epoxy and compared with glass fiber/epoxy. These results indicate that coir can be used as a potential reinforcing material for making low load bearing thermoplastic composites.

  20. Modeling the mechanical properties of liver fibrosis in rats.

    PubMed

    Zhu, Ying; Chen, Xin; Zhang, Xinyu; Chen, Siping; Shen, Yuanyuan; Song, Liang

    2016-06-14

    The progression of liver fibrosis changes the biomechanical properties of liver tissue. This study characterized and compared different liver fibrosis stages in rats in terms of viscoelasticity. Three viscoelastic models, the Voigt, Maxwell, and Zener models, were applied to experimental data from rheometer tests and then the elasticity and viscosity were estimated for each fibrosis stage. The study found that both elasticity and viscosity are correlated with the various stages of liver fibrosis. The study revealed that the Zener model is the optimal model for describing the mechanical properties of each fibrosis stage, but there is no significant difference between the Zener and Voigt models in their performance on liver fibrosis staging. Therefore the Voigt model can still be effectively used for liver fibrosis grading. PMID:27017300

  1. Structure Formation Mechanisms and Electrical Properties of PVD Fluoropolymer Films

    NASA Astrophysics Data System (ADS)

    Luchnikov, P. A.

    2015-01-01

    The mechanisms of forming fluoropolymer coatings on silicon substrates via condensation from an active gas phase using directed flows of accelerated electrons and ions are studied. It is demonstrated that electrical properties of the resulting fluoropolymer films strongly depend on the technological parameters of the deposition process. Their most optimal properties are reported when condensation takes place at the temperatures within ~373-386 K. It is shown that thermal annealing of the films in vacuum at 430-470 K improves their electrophysical parameters by re-evaporating the low-molecular complexes from the structure and decreasing the concentration of defects and spin-radicals, while annealing in air gives rise to formation of additional polar groups.

  2. Photoacoustic characterization of the mechanical properties of thin films

    NASA Astrophysics Data System (ADS)

    Hernandez, Carmen M.; Murray, Todd W.; Krishnaswamy, Sridhar

    2002-01-01

    Narrow band photoacoustics (laser ultrasonics) are used to characterize the properties of free-standing nanometer-sized thin films. Photoacoustic generation is achieved by use of a microchip laser which deposits pulsed laser energy in the form of a spatially periodic source on the structure. The resulting narrow band ultrasonic modes are monitored using a Michelson interferometer. By varying the geometry of the spatially periodic source, a wide range of acoustic wave numbers is probed. Results are presented for two-layer thin film aluminum/silicon-nitride (Al/Si3N4) membranes. For such thin films, only the two lowest order guided modes are generated and these in turn can be related to sheet and flexural modes in plates. The mechanical properties and residual stress in the thin films are evaluated from measured acoustic dispersion curves for these two lowest order modes.

  3. Mechanical and electrical properties of ZnO/Ag nanocomposites.

    SciTech Connect

    Hayashi, Y.

    1998-08-27

    Effects of Ag particle dispersions on microstructural development and some properties were investigated for ZnO/Ag nanocomposites. They were fabricated by Pulse Electric Current Sintering (PECS) Process to achieve finer and densified microstructure. ZnO/Ag nanocomposites with novel microstructure which were prepared by a reduction process using Ag{sub 2}O fine powders were compared with microcomposites prepared by mixing of Ag and ZnO powders. SEM observation indicated that fine Ag particles were homogeneously dispersed within the ZnO matrix grains and at the grain boundaries for ZnO/Ag nanocomposites prepared by the reduction process using Ag{sub 2}O fine powder. Hardness and fracture toughness increased with increasing the Ag volume fraction. Linear resistivity was decreased with increasing Ag volume fraction. However, the mechanical and electrical properties appeared to the significantly different for composites prepared by two different powder processes.

  4. Estimation of mechanical properties of nanomaterials using artificial intelligence methods

    NASA Astrophysics Data System (ADS)

    Vijayaraghavan, V.; Garg, A.; Wong, C. H.; Tai, K.

    2014-09-01

    Computational modeling tools such as molecular dynamics (MD), ab initio, finite element modeling or continuum mechanics models have been extensively applied to study the properties of carbon nanotubes (CNTs) based on given input variables such as temperature, geometry and defects. Artificial intelligence techniques can be used to further complement the application of numerical methods in characterizing the properties of CNTs. In this paper, we have introduced the application of multi-gene genetic programming (MGGP) and support vector regression to formulate the mathematical relationship between the compressive strength of CNTs and input variables such as temperature and diameter. The predictions of compressive strength of CNTs made by these models are compared to those generated using MD simulations. The results indicate that MGGP method can be deployed as a powerful method for predicting the compressive strength of the carbon nanotubes.

  5. Asteroid Regolith Mechanical Properties: Laboratory Experiments With Cohesive Powders

    NASA Astrophysics Data System (ADS)

    Durda, Daniel D.; Scheeres, D. J.; Roark, S. E.; Dissly, R.; Sanchez, P.

    2012-10-01

    Despite clear evidence that small asteroids undergo drastic physical evolution, the geophysics and mechanics of many of the processes governing that evolution remain a mystery due to a lack of scientific data, both on the sub-surface and global geophysics of these small bodies and on the mechanical properties of regoliths in the unique micro-gravity regime they inhabit. We are beginning a three-year effort to study regolith properties and processes on low-gravity, small asteroids by conducting analog experiments with cohesive powders in a 1-g laboratory environment. Based on a rigorous comparison of forces it can be shown that van der Waals cohesive forces between millimeter to centimeter-sized grains on asteroids ranging in size from Eros to Itokawa, respectively, may exceed their ambient weight several-fold. This observation implies that regoliths composed of impact debris of those sizes should behave on the microgravity surfaces of small asteroids like flour or other cohesive powders do in the 1-g environment here on Earth. Our goal is to develop an improved understanding of the role of cohesion in affecting regolith processes and surface morphology of small Solar System bodies, some the targets of ongoing and proposed NASA New Frontiers and Discovery missions, and to quantify the range of expected mechanical properties of such regoliths. Our experiments will be conducted in ambient and vacuum conditions within an environmental test chamber at Ball Aerospace & Technologies Corporation (BATC) in Boulder, CO. To aid in validating our experiment chamber and support equipment performance, and before proceeding with experiments on geologic regolith simulant materials, we will perform a series of comparative, ‘calibration’ experiments with micro glass spheres; all primary experiments will be performed with at least one non-idealized regolith simulant, like JSC-1, that more realistically simulates the angular particle shapes expected in actual geologic fragments

  6. Mechanical properties of a biodegradable bone regeneration scaffold

    NASA Technical Reports Server (NTRS)

    Porter, B. D.; Oldham, J. B.; He, S. L.; Zobitz, M. E.; Payne, R. G.; An, K. N.; Currier, B. L.; Mikos, A. G.; Yaszemski, M. J.

    2000-01-01

    Poly (Propylene Fumarate) (PPF), a novel, bulk erosion, biodegradable polymer, has been shown to have osteoconductive effects in vivo when used as a bone regeneration scaffold (Peter, S. J., Suggs, L. J., Yaszemski, M. J., Engel, P. S., and Mikos, A. J., 1999, J. Biomater. Sci. Polym. Ed., 10, pp. 363-373). The material properties of the polymer allow it to be injected into irregularly shaped voids in vivo and provide mechanical stability as well as function as a bone regeneration scaffold. We fabricated a series of biomaterial composites, comprised of varying quantities of PPF, NaCl and beta-tricalcium phosphate (beta-TCP), into the shape of right circular cylinders and tested the mechanical properties in four-point bending and compression. The mean modulus of elasticity in compression (Ec) was 1204.2 MPa (SD 32.2) and the mean modulus of elasticity in bending (Eb) was 1274.7 MPa (SD 125.7). All of the moduli were on the order of magnitude of trabecular bone. Changing the level of NaCl from 20 to 40 percent, by mass, did not decrease Ec and Eb significantly, but did decrease bending and compressive strength significantly. Increasing the beta-TCP from 0.25 g/g PPF to 0.5 g/g PPF increased all of the measured mechanical properties of PPF/NVP composites. These results indicate that this biodegradable polymer composite is an attractive candidate for use as a replacement scaffold for trabecular bone.

  7. Mechanical properties of normal and osteoarthritic human articular cartilage.

    PubMed

    Robinson, Dale L; Kersh, Mariana E; Walsh, Nicole C; Ackland, David C; de Steiger, Richard N; Pandy, Marcus G

    2016-08-01

    Isotropic hyperelastic models have been used to determine the material properties of normal human cartilage, but there remains an incomplete understanding of how these properties may be altered by osteoarthritis. The aims of this study were to (1) measure the material constants of normal and osteoarthritic human knee cartilage using isotropic hyperelastic models; (2) determine whether the material constants correlate with histological measures of structure and/or cartilage tissue damage; and (3) quantify the abilities of two common isotropic hyperelastic material models, the neo-Hookean and Yeoh models, to describe articular cartilage contact force, area, and pressure. Small osteochondral specimens of normal and osteoarthritic condition were retrieved from human cadaveric knees and from the knees of patients undergoing total knee arthroplasty and tested in unconfined compression at loading rates and large strains representative of weight-bearing activity. Articular surface contact area and lateral deformation were measured concurrently and specimen-specific finite element models then were used to determine the hyperelastic material constants. Structural parameters were measured using histological techniques while the severity of cartilage damage was quantified using the OARSI grading scale. The hyperelastic material constants correlated significantly with OARSI grade, indicating that the mechanical properties of cartilage for large strains change with tissue damage. The measurements of contact area described anisotropy of the tissue constituting the superficial zone. The Yeoh model described contact force and pressure more accurately than the neo-Hookean model, whereas both models under-predicted contact area and poorly described the anisotropy of cartilage within the superficial zone. These results identify the limits by which isotropic hyperelastic material models may be used to describe cartilage contact variables. This study provides novel data for the

  8. Mechanical properties of several Fe-Ni meteorites

    SciTech Connect

    Mulford, Roberta N; El - Dasher, Bassem

    2010-10-28

    The strength and elastic constants of meteorites are of increasing interest as predictions of meteorite impacts on earth come within the realm of possibility. In addition, meteorite impacts on extraterrestrial bodies provide an excellent sampling tool for evaluation of planetary compositions and properties. Fe-Ni meteorites provide a well-defined group of materials of fairly uniform composition. Iron-nickel meteorites exhibit a unique lamellar microstructure, a Widmanstatten structure, consisting of small regions with steep-iron-nickel composition gradients. This microstructure is found in the Fe-Ni system only in meteorites, and is believed to arise as a result of slow cooling in a planetary core or other large mass. Meteorites with compositions consisting of between 5 and 17% nickel in iron are termed 'octahedrite,' and further characterized according to the width of the Ni-poor kamacite bands; 'fine,' (0.2-0.5 mm) 'medium,' (0.5-1.3 mm) and 'coarse,' (1.5-3.3 mm). Many meteorites have inclusions and structures indicating that the material has been shocked at some point early in its evolution. Several Iron-nickel meteorites have been examined using Vickers and spherical indentation, x-ray fluorescence, and EBSD. Direct observation of mechanical properties in these highly structured materials provides a valuable supplement to bulk measurements, which frequently exhibit large variation in dynamic properties, even within a single sample. Previous studies of the mechanical properties of a typical iron-nickel meteorite, a Diablo Canyon specimen, indicated that the strength of the composite was higher by almost an order of magnitude than values obtained from laboratory-prepared specimens. Additional meteorite specimens have been examined to establish a range of error on the previously measured yield, to determine the extent to which deformation upon re-entry contributes to yield, and to establish the degree to which the strength varies as a function of microstructure.

  9. Effects of Zoledronate and Mechanical Loading during Simulated Weightlessness on Bone Structure and Mechanical Properties

    NASA Technical Reports Server (NTRS)

    Scott, R. T.; Nalavadi, M. O.; Shirazi-Fard, Y.; Castillo, A. B.; Alwood, J. S.

    2016-01-01

    Space flight modulates bone remodeling to favor bone resorption. Current countermeasures include an anti-resorptive drug class, bisphosphonates (BP), and high-force loading regimens. Does the combination of anti-resorptives and high-force exercise during weightlessness have negative effects on the mechanical and structural properties of bone? In this study, we implemented an integrated model to mimic mechanical strain of exercise via cyclical loading (CL) in mice treated with the BP Zoledronate (ZOL) combined with hindlimb unloading (HU). Our working hypothesis is that CL combined with ZOL in the HU model induces additive structural and mechanical changes. Thirty-two C57BL6 mice (male,16 weeks old, n8group) were exposed to 3 weeks of either HU or normal ambulation (NA). Cohorts of mice received one subcutaneous injection of ZOL (45gkg), or saline vehicle, prior to experiment. The right tibia was axially loaded in vivo, 60xday to 9N in compression, repeated 3xweek during HU. During the application of compression, secant stiffness (SEC), a linear estimate of slope of the force displacement curve from rest (0.5N) to max load (9.0N), was calculated for each cycle once per week. Ex vivo CT was conducted on all subjects. For ex vivo mechanical properties, non-CL left femurs underwent 3-point bending. In the proximal tibial metaphysis, HU decreased, CL increased, and ZOL increased the cancellous bone volume to total volume ratio by -26, +21, and +33, respectively. Similar trends held for trabecular thickness and number. Ex vivo left femur mechanical properties revealed HU decreased stiffness (-37),and ZOL mitigated the HU stiffness losses (+78). Data on the ex vivo Ultimate Force followed similar trends. After 3 weeks, HU decreased in vivo SEC (-16). The combination of CL+HU appeared additive in bone structure and mechanical properties. However, when HU + CL + ZOL were combined, ZOL had no additional effect (p0.05) on in vivo SEC. Structural data followed this trend with

  10. Electronic, mechanical and dielectric properties of silicane under tensile strain

    SciTech Connect

    Jamdagni, Pooja Sharma, Munish; Ahluwalia, P. K.; Kumar, Ashok; Thakur, Anil

    2015-05-15

    The electronic, mechanical and dielectric properties of fully hydrogenated silicene i.e. silicane in stable configuration are studied by means of density functional theory based calculations. The band gap of silicane monolayer can be flexibly reduced to zero when subjected to bi-axial tensile strain, leading to semi-conducting to metallic transition, whereas the static dielectric constant for in-plane polarization increases monotonically with increasing strain. Also the EEL function show the red shift in resonance peak with tensile strain. Our results offer useful insight for the application of silicane monolayer in nano-optical and electronics devices.

  11. Mechanical Properties of a Partially Solidified Cu-Zn Alloy

    NASA Astrophysics Data System (ADS)

    Kasuya, Naoki; Nakazawa, Tomoaki; Matsushita, Akira; Okane, Toshimitsu; Yoshida, Makoto

    2016-04-01

    For predicting solidification cracking by thermal stress analysis, the mechanical properties in the partially solidified state based on the experimental results are the best hope. However, the Young's modulus has never been investigated for copper alloys. In this study, stress-strain curves of a Cu-Zn alloy in the partially solidified state for various solid fractions were obtained using a specially developed horizontal tensile test device. Furthermore, by removing the load during the tensile test, the spring-back (elastic behavior) was observed and the Young's modulus was obtained.

  12. Mechanical properties of oxide dispersion strengthened (ODS) molybdenum alloys

    SciTech Connect

    Bianco, R.; Buckman, R.W. Jr.

    1998-03-01

    Oxide dispersion strengthened molybdenum, Mo-ODS, developed by a proprietary powder metallurgy process, exhibits a creep rupture life at 0.65T{sub m} (1,600 C) of three to five orders of magnitude greater than unalloyed molybdenum, while maintaining ductile fracture behavior at temperatures significantly below room temperature. In comparison, the creep rupture life of the Mo-50Re solid solution strengthened alloy at 1,600 C is only an order of magnitude greater than unalloyed molybdenum. The results of microstructural characterization and thermal stability and mechanical property testing are discussed.

  13. Mechanical and thermal properties of planetologically important ices

    NASA Technical Reports Server (NTRS)

    Croft, Steven K.

    1987-01-01

    Two squences of ice composition were proposed for the icy satellites: a dense nebula model and a solar nebula model. Careful modeling of the structure, composition, and thermal history of satellites composed of these various ices requires quantitative information on the density, compressibility, thermal expansion, heat capacity, and thermal conductivity. Equations of state were fitted to the density data of the molecular ices. The unusual thermal and mechanical properties of the molecular and binary ices suggest a larger range of phenomena than previously anticipated, sufficiently complex perhaps to account for many of the unusual geologic phenomena found on the icy satellites.

  14. Microstructure and mechanical properties of eutectic nickel alloy coatings

    NASA Astrophysics Data System (ADS)

    Bezborodov, V. P.; Saraev, Yu N.

    2016-04-01

    The paper discusses the peculiarities of a structure and a coating composition after reflow. It was established that the structure of coatings from nickel alloy is a solid solution based on nickel, the eutectic of γ-Ni+Ni3B composition and dispersed reinforcing particles. The content of alloying elements in the initial powder material determines the type of the coating structure and the formation of hypoeutectic or hypereutectic structures. The influence of formation conditions on the structure and physical-mechanical properties of the coatings is considered in this paper.

  15. How Molecular Structure Affects Mechanical Properties of an Advanced Polymer

    NASA Technical Reports Server (NTRS)

    Nicholson, Lee M.; Whitley, Karen S.; Gates, Thomas S.; Hinkley, Jeffrey A.

    2000-01-01

    density was performed over a range of temperatures below the glass transition temperature. The physical characterization, elastic properties and notched tensile strength all as a function of molecular weight and test temperature were determined. For the uncrosslinked SI material, it was shown that notched tensile strength is a strong function of both temperature and molecular weight, whereas stiffness is only a strong function of temperature. For the crosslinked PETI-SI material, it was shown that the effect of crosslinking significantly enhances the mechanical performance of the low molecular weight material; comparable to that exhibited by the high molecular weight material.

  16. Nanometer scale mechanical properties of Au(111) thin films

    SciTech Connect

    Salmeron, M.; Folch, A.; Neubauer, G.

    1992-11-01

    The mechanical properties of gold films of (111) orientation were studied as a function of load when contacted by a single asperity Pt-Rh alloy tip. The interaction forces were measured in the direction perpendicular to the surface. The contribution of various types of forces (van der Waals, capillarity from contaminants, and metallic adhesion) in the process of contact was determined. We investigated the elastic and plastic response of the gold film as a function of applied load by examination of the contact area in subsequent imaging with STM and AFM.

  17. Probing microscopic mechanical properties of hard tissues with Brillouin spectroscopy

    NASA Astrophysics Data System (ADS)

    Meng, Zhaokai; Yakovlev, Vladislav V.

    2015-02-01

    Mechanical properties of hard tissues play an important role in understanding underlying biological structures, as well as assessing the quality of artificial bone replacement materials. In this study, we employed Brillouin spectroscopy as a non-invasive approach to probe the microscopic elasticity of hard tissues, such as bones. Brillouin spectra were collected using a background free virtually imaged phased array spectrometer. As a reference, Raman spectra were also acquired for each imaging point. Experimental results reveal a positive correlation between the local concentration of the mineral content and the corresponding tissue stiffness, assessed through a Brillouin shift.

  18. Investigation into mechanical properties of bone and its main constituents

    NASA Astrophysics Data System (ADS)

    Evdokimenko, Ekaterina

    Bone is a hierarchically structured natural composite material, consisting of organic phase (type-I collagen), inorganic phase (hydroxyapatite), and water. Studies of the two main bone constituents, utilizing controlled demineralization and deproteinization, can shed light on mineral-collagen interaction which makes bone such a unique biological material. This knowledge is necessary for computational analysis of bone structure to identify preferential sites in the collagen matrix and mineral network that degrade more easily. The main goal of this work is to develop a comprehensive picture of mechanical properties of bone and its main constituents. Following the Introduction, Chapter 2 presents an investigation of microstructure and compressive mechanical properties of bovine femur cortical bone carried out on completely demineralized, completely deproteinized, and untreated bone samples in three anatomical directions. Anisotropic nature of bone was clearly identified in all cases. Extra levels of porosity along with microstructural differences for the three directions were found to be the main sources of the anisotropy. In Chapter 3, a new theoretical model of cortical and trabecular bone as composite materials with hierarchical structure spanning from nanometer (collagen-mineral) level to millimeter (bone) level was developed. Compression testing was performed on untreated, demineralized, and deproteinized cortical and trabecular bovine femur bone samples to verify the model. The experimental data were compared with theoretical predictions; excellent agreement was found between the theory and experiments for all bone phases. Optical microscopy, scanning electron microscopy, and micro-computed tomography techniques were applied to characterize the structure of the samples at multiple length scales and provide further inputs for the modeling. Chapter 4 presents a comparative study of mechanical properties, microstructure, and porosity of mature and young bovine

  19. Electronic, mechanical and dielectric properties of silicane under tensile strain

    NASA Astrophysics Data System (ADS)

    Jamdagni, Pooja; Kumar, Ashok; Sharma, Munish; Thakur, Anil; Ahluwalia, P. K.

    2015-05-01

    The electronic, mechanical and dielectric properties of fully hydrogenated silicene i.e. silicane in stable configuration are studied by means of density functional theory based calculations. The band gap of silicane monolayer can be flexibly reduced to zero when subjected to bi-axial tensile strain, leading to semi-conducting to metallic transition, whereas the static dielectric constant for in-plane polarization increases monotonically with increasing strain. Also the EEL function show the red shift in resonance peak with tensile strain. Our results offer useful insight for the application of silicane monolayer in nano-optical and electronics devices.

  20. Shear mechanical properties of the spleen: experiment and analytical modelling.

    PubMed

    Nicolle, S; Noguer, L; Palierne, J-F

    2012-05-01

    This paper aims at providing the first shear mechanical properties of spleen tissue. Rheometric tests on porcine splenic tissues were performed in the linear and nonlinear regime, revealing a weak frequency dependence of the dynamic moduli in linear regime and a distinct strain-hardening effect in nonlinear regime. These behaviours are typical of soft tissues such as kidney and liver, with however a less pronounced strain-hardening for the spleen. An analytical model based on power laws is then proposed to describe the general shear viscoelastic behaviour of the spleen. PMID:22498291

  1. Magnetic properties of metastable Fe Pd alloys by mechanical alloying

    NASA Astrophysics Data System (ADS)

    Yabe, Hiromasa; O'Handley, Robert C.; Kuji, Toshiro

    2007-03-01

    Metastable Fe-Pd powder samples with various Pd content were synthesized by mechanical alloying. Their fundamental properties, i.e., structure, magnetization and coercive fore are discussed. The saturation magnetizations of the metastable Fe-Pd powders gradually decreases with increasing Pd content. The coercive forces observed in as-milled samples are all less than 40 Oe. However, some of the heat-treated samples, notably, Pd content around 55 at% with L1 0 structure, shows Hc up to 1589 Oe.

  2. Theoretical study on mechanical properties of polyethylene-SWCNT complexes

    NASA Astrophysics Data System (ADS)

    Petrushenko, Igor K.

    2016-01-01

    This paper studies the mechanical properties of polyethylene (PE)-Single-walled carbon nanotube (SWCNT) complexes by using density functional theory (DFT). At the PBE/SVP level, the Young’s modulus of the complexes is obtained as a function of PE content. It is established that, with increasing number of PE chains attached to the SWCNTs, the Young’s modulus monotonically decreases. The density of states (DOS) results show that no orbital hybridization exists between the PE chains and nanotubes. The results of this work are of importance for the design of composite materials employing SWCNTs.

  3. Mechanical Properties of Oil Palm Empty Fruit Bunch Fiber

    NASA Astrophysics Data System (ADS)

    Gunawan, Fergyanto E.; Homma, Hiroomi; Brodjonegoro, Satryo S.; Hudin, Afzer Bin Baseri; Zainuddin, Aryanti Binti

    In tropical countries such as Indonesia and Malaysia, the empty fruit bunches are wastes of the oil palm industry. The wastes are abundantly available and has reached a level that severely threats the environment. Therefore, it is a great need to find useful applications of those waste materials; but firstly, the mechanical properties of the EFB fiber should be quantified. In this work, a small tensile test machine is manufactured, and the tensile test is performed on the EFB fibers. The results show that the strength of the EFB fiber is strongly affected by the fiber diameter; however, the fiber strength is relatively low in comparison to other natural fibers.

  4. Genetic and environmental modification of the mechanical properties of wood

    NASA Astrophysics Data System (ADS)

    Sederoff, R.; Allona, I.; Whetten, R.

    1996-02-01

    Wood is one of the nation's leading raw materials and is used for a wide variety of products, either directly as wood, or as derived materials in pulp and paper. Wood is a biological material and evolved to provide mechanical support and water transport to the early plants that conquered the land. Wood is a tissue that results from the differentiation and programmed cell death of cells that derive from a tissue known as the vascular cambium. The vascular cambium is a thin cylinder of undifferentiated tissue in plant stems and roots that gives rise to several different cell types. Cells that differentiate on the internal side of the cambium form xylem, a tissue composed in major part, of long thin cells that die leaving a network of interconnected cell walls that serve to transport water and to provide mechanical support for the woody plant. The shape and chemical composition of the cells in xylem are well suited for these functions. The structure of cells in xylem determines the mechanical properties of the wood because of the strength derived from the reinforced matrix of the wall. The hydrophobic phenolic surface of the inside of the cell walls is essential to maintain surface tension upon which water transport is based and to resist decay caused by microorganisms. The properties of wood derived from the function of xylem also determine its structural and chemical properties as wood and paper products. Therefore, the physical and chemical properties of wood and paper products also depend on the morphology and composition of the cells from which they are derived. Wood (xylem cell walls) is an anisotropic material, a composite of lignocellulose. It is a matrix of cellulose microfibrils, complexed with hemicelluloses, (carbohydrate polymers which contain sugars other than glucose, both pentoses and hexoses), embedded together in a phenolic matrix of lignin. The high tensile strength of wood in the longitudinal direction, is due to the structure of cellulose and the

  5. Mechanical properties of stapedial tendon in human middle ear.

    PubMed

    Cheng, Tao; Gan, Rong Z

    2007-12-01

    Measurement on mechanical properties of the stapedial tendon in human middle ear has not been reported in the literature. In this paper, we used the material testing system to conduct uniaxial tensile, stress relaxation, and failure tests on stapedial tendon specimens harvested from human temporal bones. The digital image correlation method was employed to assess the boundary effect on experimental data. The stress-strain relationship of the tendon obtained from experiments was analyzed using the hyperelastic Ogden model. The results presented include (1) the constitutive equation of the tendon for stretch ratio of 1-1.4 or stress range of 0-1.45 MPa, (2) the mean ultimate stress and stretch ratio of the tendon at 4.04 MPa and 1.65, respectively, and (3) the hysteresis and normalized stress relaxation function of the tendon. The data reported in this paper contribute to ear mechanics, especially for theoretical analysis of human ear function. PMID:18067396

  6. Macroporous hydrogels with tailored morphology and mechanical properties

    NASA Astrophysics Data System (ADS)

    Bignotti, Fabio; Agnelli, Silvia; Baldi, Francesco; Sartore, Luciana; Peroni, Isabella

    2016-05-01

    In this work it is shown that hydroxyethylcellulose (HEC) can be employed for preparing macroporous polyacrylamide (PAAm) hydrogels with tailored morphology and mechanical properties. By changing the HEC content in the reaction mixture hydrogels with different pore sizes and degrees of interconnectivity can be synthesized. The equilibrium swelling ratio in 0.1 M NaCl increases with the amount of HEC employed. Tensile tests run on equilibrated hydrogels show that these materials behave as rubber-like materials. Their mechanical stiffness decreases regularly as the amount of HEC, and therefore their porosity, is increased. A more complex trend is observed for elongation and stress at break, which display a maximum at intermediate contents of HEC.

  7. Mechanical and acoustic properties of weakly cemented granular rocks

    SciTech Connect

    Nakagawa, S.; Myer, L.R.

    2001-05-09

    This paper presents the results of laboratory measurements on the mechanical and acoustic properties of weakly cemented granular rock. Artificial rock samples were fabricated by cementing sand and glass beads with sodium silicate binder. During uniaxial compression tests, the rock samples showed stress-strain behavior which was more similar to that of soils than competent rocks, exhibiting large permanent deformations with frictional slip. The mechanical behavior of the samples approached that of competent rocks as the amount of binder was increased. For very weak samples, acoustic waves propagating in these rocks showed very low velocities of less than 1000 m/sec for compressional waves. A borehole made within this weakly cemented rock exhibited a unique mode of failure that is called ''anti-KI mode fracture'' in this paper. The effect of cementation, grain type, and boundary conditions on this mode of failure was also examined experimentally.

  8. Mechanical properties of polyimide coated optical fibers at elevated temperatures

    NASA Astrophysics Data System (ADS)

    Huang, Lei; Dyer, Robert S.; Lago, Ralph J.; Stolov, Andrei A.; Li, Jie

    2016-03-01

    High temperature mechanical strength and reliability of optical fibers have become important subjects as optical fibers are increasingly used for harsher environments. Theories and models of fiber mechanical properties established for traditional telecommunications applications may need to be validated for applications at elevated temperatures. In this paper, we describe the test setup for high temperature tensile strength of fiber and report initial results of dynamic tensile strength of polyimide coated optical fiber at 300 and 350ºC for different heating time intervals. The results are compared with room temperature strength data, data available in the literature, and our earlier work on thermogravimetric analysis (TGA) weight loss of the polyimide coating and the observations on surface morphology at elevated temperatures. Interesting observations are discussed and possible explanations are proposed.

  9. Nanoclay modified polycarbonate blend nanocomposites: Calorimetric and mechanical properties

    NASA Astrophysics Data System (ADS)

    Zicans, Janis; Meri, Remo Merijs; Ivanova, Tatjana; Berzina, Rita; Kalnins, Martins; Maksimovs, Roberts

    2014-05-01

    The research is devoted to characterization of polycarbonate (PC)/acrylonitrile-butadiene styrene (ABS) blend nanocomposites in respects to it mechanical and calorimetric properties. It is shown that PC blend with 10wt% of ABS is more suitable for development of polymer-clay nanocomposites than PC blend with 40wt.% of ABS. It is revealed that the greatest modulus and strength increment is observed for PC/10wt.%ABS blend nanocomposites, containing aromatic organomodifier treated clay (Dellite 43B). It is also determined that optimal nanofiller content for the investigated PC/10%ABS blend is 1.5 wt.%. Increase of mechanical characteristics of PC/10wt.%ABS blend nanocomposites is accompanied with the rise of glass transition temperatures of both polymeric phases, particularly that of PC.

  10. Hydrodynamic interaction induced mechanical properties of SGF reinforced polyethersulfone

    NASA Astrophysics Data System (ADS)

    Munirathnamma, L. M.; Ningaraju, S.; Kumar, K. V. Aneesh; Ravikumar, H. B.

    2016-05-01

    In order to explore the effect of short glass fiber (SGF) reinforcement on the mechanical properties of Polyethersulfone (PES), short glass fibers of different proportion (10 - 40 wt %) are reinforced into PES matrix. The free volume distribution of SGFR-PES composites derived from CONTIN-PALS2 program exhibits the narrow full width at half maximum (FWHM). This is attributed to the improved adhesion resulted by the hydrodynamic interaction between the polymeric chains of PES matrix and SGF. The hydrodynamic interaction parameter (h) decreases as a function of SGF wt% and becomes more negative for 40 wt% SGFR-PES composites suggest the generation of excess friction at the interface. This improves the adhesion between the polymeric chains of PES matrix and SGF and hence the mechanical strength of the SGFR-PES composites.

  11. Anisotropic mechanical properties of graphene: a molecular dynamics study

    NASA Astrophysics Data System (ADS)

    Yu, Ming; Zeng, Anna; Zeng, Kevin

    2014-03-01

    The anisotropic mechanical properties of monolayer graphene with different shapes have been studied using an efficient quantum mechanics molecular dynamics scheme based on a semi-empirical Hamiltonian (refereed as SCED-LCAO) [PRB 74, 15540; PHYSE 42, 1]. We have found the anisotropic nature of the membrane stress. The stresses along the armchair direction are slightly stronger than that along the zigzag direction, showing strong direction selectivity. The graphene with the rectangular shape could sustain strong load (i . e ., 20%) in both armchair and zigzag directions. The graphene with the rhombus shape show large difference in the strain direction: it will quickly crack after 18 % of strain in armchair the direction, but slowly destroyed after 20% in the zigzag direction. The obtained 2D Young's modulus at infinitesimal strain and the third-order (effective nonlinear) elastic modulus are in good consistent with the experimental observation.

  12. Mechanical properties of micro-injected HDPE composites

    NASA Astrophysics Data System (ADS)

    Bongiorno, A.; Pagano, C.; Agnelli, S.; Baldi, F.; Fassi, I.

    2016-03-01

    Micro-injection moulding is one of the key manufacturing technologies for the mass production of high value polymeric miniaturized-components. However, this process is not just a straightforward down scaling of the conventional injection moulding technique. Indeed, during the micro-injection the polymer melt is forced to flow at high strain rates through very small channels in non-isothermal conditions, and this can lead to complex microstructures and to parts with unexpected performances. In this work, the relationships among the processing conditions, the mechanical properties and the microstructural characteristics of miniaturized specimens obtained by injection moulding were investigated. Two model systems were considered with the same filler content of 15% wt. (HDPE-talc and HDPE-glass beads), representative of two different types of micro-composites: containing lamellar and spherical micro-particles, respectively. The attention was focused on the influence of the filler type and the process conditions on the mechanical behaviour, examined by uniaxial tensile tests and dynamic-mechanical analyses, and on the morphological characteristics of the specimens, examined by microscopy analyses. The results highlight that mechanical response of the miniaturized specimens is significantly affected by both the filler and the process conditions that can have an influence on the polymer microstructure. Lamellar composites showed the best performance due to the orientation of the talc particles during the micro-injection process, while, different morphologies of the skin/core transition region in dependence on the process temperatures were observable.

  13. Properties and mechanisms of olfactory learning and memory

    PubMed Central

    Tong, Michelle T.; Peace, Shane T.; Cleland, Thomas A.

    2014-01-01

    Memories are dynamic physical phenomena with psychometric forms as well as characteristic timescales. Most of our understanding of the cellular mechanisms underlying the neurophysiology of memory, however, derives from one-trial learning paradigms that, while powerful, do not fully embody the gradual, representational, and statistical aspects of cumulative learning. The early olfactory system—particularly olfactory bulb—comprises a reasonably well-understood and experimentally accessible neuronal network with intrinsic plasticity that underlies both one-trial (adult aversive, neonatal) and cumulative (adult appetitive) odor learning. These olfactory circuits employ many of the same molecular and structural mechanisms of memory as, for example, hippocampal circuits following inhibitory avoidance conditioning, but the temporal sequences of post-conditioning molecular events are likely to differ owing to the need to incorporate new information from ongoing learning events into the evolving memory trace. Moreover, the shapes of acquired odor representations, and their gradual transformation over the course of cumulative learning, also can be directly measured, adding an additional representational dimension to the traditional metrics of memory strength and persistence. In this review, we describe some established molecular and structural mechanisms of memory with a focus on the timecourses of post-conditioning molecular processes. We describe the properties of odor learning intrinsic to the olfactory bulb and review the utility of the olfactory system of adult rodents as a memory system in which to study the cellular mechanisms of cumulative learning. PMID:25071492

  14. Mechanical properties and imaging characteristics of remanufactured intravascular ultrasound catheters.

    PubMed

    Hoffmann, R; Haager, P; Mintz, G; Klues, H

    2000-02-01

    Intravascular ultrasound (IVUS) as a routine device in interventional cardiology is handicapped by its high price. 19 factory-made, 'remanufactured' IVUS catheters which consist of sterilized, used phased-array IVUS transducers inserted into a new catheter shaft were compared with 23 new IVUS catheters. 3 mechanical and 4 imaging characteristics were assessed on a 5 point scale (1 = unacceptable, 5 = excellent). Mechanical as well as imaging properties of 'remanufactured' IVUS catheter were comparable to new catheters with excellent ratings for each of the evaluated characteristics in 38 to 94% of 'remanufactured' catheters and 50 to 96% of new catheters. The initial failure rate for 'remanufactured' IVUS catheters was 31.6% vs. 4.3% for new catheters (P < 0.05). Overall failure rate was 47.3% for "remanufactured" catheters vs. 8.7% for new catheters (P < 0.05). The failure was due to an electronic connecting problem occurring during mechanical stress to the IVUS catheter. In conclusion, 'remanufactured' IVUS catheters offer mechanical and imaging characteristics which are comparable to new catheters. Improvements in the 'remanufacturing' process to resolve the high rate of electronic connecting problems may make this a promising approach to substantially lower the price of IVUS catheters. PMID:10832621

  15. Effect of Network Structure/Topology on Mechanical Properties of Crosslinked Polymers

    NASA Astrophysics Data System (ADS)

    Sharifi, Majid

    The interest in epoxy thermosetting polymers is widespread (e.g. Boeing 787 Dreamliner, windmill blades, automobiles, coatings, adhesives, etc.), and a demand still exists for improving toughness of these materials without degrading advantageous properties such as strength, modulus, and Tg. This study introduces novel approaches for improving the intrinsic mechanical characteristics of these polymers. The designed synthetic techniques focus on developing polymer materials with the same overall compositions but varying in network topologies, with distinct topological features in the size range of 5-50 nm, measured by SAXS and SEM. It was found that without altering chemical structure, the network topology of a dense thermoset can be engineered such that, under mechanical deformation, nano-cavities open and dissipate energy before rupturing covalent bonds, producing a tougher material without sacrificing strength, modulus, and even glass transition temperature. Modified structures also revealed higher resistance to fracture than the corresponding control structures. The major fracture mechanism responsible for the increased energy dissipation was found to be nano-cavitation. SEM images from the fracture surfaces showed clear cavities on the modified samples whereas none were seen on the fracture surface of the control samples. Overall, it was demonstrated that network topology can be used to tailor thermal and mechanical properties of thermosetting polymers. The experimental methodologies in this dissertation can directly and economically be applied to design polymeric materials with improved properties for desired applications. Although topology-based toughening was investigated on epoxy-amine polymers, the concept can be extended to most thermoset chemistries and perhaps to other brittle network forming materials.

  16. Effect of fabrication processes on mechanical properties of glass fiber reinforced polymer composites for 49 meter (160 foot) recreational yachts

    NASA Astrophysics Data System (ADS)

    Kim, Dave (dea-wook); Hennigan, Daniel John; Beavers, Kevin Daniel

    2010-03-01

    Polymer composite materialsoffer high strength and stiffness to weight ratio, corrosion resistance, and total life cost reductions that appeal to the marine industry. The advantages of composite construction have led to their incorporation in U.S. yacht hull structures over 46 meters (150 feet) in length. In order to construct even larger hull structures, higher quality composites with a lower cost production techniques need to be developed. In this study, the effect of composite hull fabrication processes on mechanical properties of glass fiber reinforced plastic(GFRP) composites is presented. Fabrication techniques used in this study are hand lay-up (HL), vacuum infusion (VI), and hybrid (HL+VI) processes. Mechanical property testing includes: tensile, compressive, and ignition loss sample analysis. Results demonstrate that the vacuum pressure implemented during composite fabrication has an effect on mechanical properties. The VI processed GFRP yields improved mechanical properties in tension/compression strengths and tensile modulus. The hybrid GFRP composites, however, failed in a sequential manor, due to dissimilar failure modes in the HL and VI processed sides. Fractography analysis was conducted to validate the mechanical property testing results

  17. Application of dynamic mechanical analysis (DMA) to determine the mechanical properties of pellets.

    PubMed

    Bashaiwoldu, Abraham B; Podczeck, F; Newton, J M

    2004-01-28

    Pellets of a wide range of mechanical properties were produced by the process of extrusion and spheronisation using various formulation factors. A range of mechanical properties from a simple fracture load to detailed load/displacement curves obtained when pellets were subjected to diametral compression test and a bed of pellets was compacted, were used to provide measure of tensile strength, deformability, linear strain, elastic modulus, yield and shear strength. Such conventional techniques resulted in irreversible damage to the structure of the pellets and were unable to establish the viscoelastic properties of the pellets. The application of the dynamic mechanical analysis (DMA), however, allowed the determination of (1) an accurate Young's modulus of elasticity, which was found to be between 8.4 and 24-fold higher than that determined from the diametral compression test, (2) the presence of a reversible elastic deformation even after the yield point in terms of storage modulus and (3) a change in the values of the phase angle, which illustrates the increase in viscoelasticity of the pellets formed with ethanol, glyceryl monostearate (GMS) or glycerol, while a decrease in viscoelasticity with the incorporation of lactose into the microcrystalline cellulose (MCC) pellets. This work further demonstrated that the only feasible technique for determining the elastic and plastic deformability of the pellets is the one which subjects the specimen to stress/relaxation cycles and can determine the dissipated energy in terms of loss modulus or phase angle, and that is DMA. PMID:14706245

  18. Decoupling Mechanical and Ion Transport Properties in Polymer Electrolyte Membranes

    NASA Astrophysics Data System (ADS)

    McIntosh, Lucas D.

    Polymer electrolytes are mixtures of a polar polymer and salt, in which the polymer replaces small molecule solvents and provides a dielectric medium so that ions can dissociate and migrate under the influence of an external electric field. Beginning in the 1970s, research in polymer electrolytes has been primarily motivated by their promise to advance electrochemical energy storage and conversion devices, such as lithium ion batteries, flexible organic solar cells, and anhydrous fuel cells. In particular, polymer electrolyte membranes (PEMs) can improve both safety and energy density by eliminating small molecule, volatile solvents and enabling an all-solid-state design of electrochemical cells. The outstanding challenge in the field of polymer electrolytes is to maximize ionic conductivity while simultaneously addressing orthogonal mechanical properties, such as modulus, fracture toughness, or high temperature creep resistance. The crux of the challenge is that flexible, polar polymers best-suited for polymer electrolytes (e.g., poly(ethylene oxide)) offer little in the way of mechanical robustness. Similarly, polymers typically associated with superior mechanical performance (e.g., poly(methyl methacrylate)) slow ion transport due to their glassy polymer matrix. The design strategy is therefore to employ structured electrolytes that exhibit distinct conducting and mechanically robust phases on length scales of tens of nanometers. This thesis reports a remarkably simple, yet versatile synthetic strategy---termed polymerization-induced phase separation, or PIPS---to prepare PEMs exhibiting an unprecedented combination of both high conductivity and high modulus. This performance is enabled by co-continuous, isotropic networks of poly(ethylene oxide)/ionic liquid and highly crosslinked polystyrene. A suite of in situ, time-resolved experiments were performed to investigate the mechanism by which this network morphology forms, and it appears to be tied to the

  19. Mechanical properties of sand, silt, and clay containing tetrahydrofuran hydrate

    USGS Publications Warehouse

    Yun, T.S.; Santamarina, C.J.; Ruppel, C.

    2007-01-01

    The mechanical behavior of hydrate-bearing sediments subjected to large strains has relevance for the stability of the seafloor and submarine slopes, drilling and coring operations, and the analysis of certain small-strain properties of these sediments (for example, seismic velocities). This study reports on the results of comprehensive axial compression triaxial tests conducted at up to 1 MPa confining pressure on sand, crushed silt, precipitated silt, and clay specimens with closely controlled concentrations of synthetic hydrate. The results show that the stress-strain behavior of hydrate-bearing sediments is a complex function of particle size, confining pressure, and hydrate concentration. The mechanical properties of hydrate-bearing sediments at low hydrate concentration (probably 50% of pore space), the behavior becomes more independent of stress because the hydrates control both stiffness and strength and possibly the dilative tendency of sediments by effectively increasing interparticle coordination, cementing particles together, and filling the pore space. The cementation contribution to the shear strength of hydrate-bearing sediments decreases with increasing specific surface of soil minerals. The lower the effective confining stress, the greater the impact of hydrate formation on normalized strength.

  20. Mechanical properties of nanostructured nickel based superalloy Inconel 718

    NASA Astrophysics Data System (ADS)

    Mukhtarov, Sh; Ermachenko, A.

    2010-07-01

    This paper will describe the investigations of a nanostructured (NS) state of nickel based INCONEL® alloy 718. This structure was generated in bulk semiproducts by severe plastic deformation (SPD) via multiple isothermal forging (MIF) of a coarse-grained alloy. The initial structure consisted of γ-phase grains with disperse precipitations of γ"-phase in the forms of discs, 50-75 nm in diameter and 20 nm in thickness. The MIF generated structures possess a large quantity of non-coherent plates and rounded precipitations of δ-phase, primarily along grain boundaries. In the duplex (γ+δ) structure the grains have high dislocation density and a large number of nonequilibrium boundaries. Investigations to determine mechanical properties of the alloy in a nanostructured state were carried out. Nanocrystalline Inconel 718 (80 nm) possesses a very high room-temperature strength after SPD. Microcrystalline (MC) and NS states of the alloy were subjected to strengthening thermal treatment, and the obtained results were compared in order to determine their mechanical properties at room and elevated temperatures.

  1. Mechanical properties of continuously spun fibers of carbon nanotubes.

    PubMed

    Motta, Marcelo; Li, Ya-Li; Kinloch, Ian; Windle, Alan

    2005-08-01

    We report on the mechanical properties of fibers consisting of pure carbon nanotube fibers directly spun from an aerogel formed during synthesis by chemical vapor deposition. The continuous withdrawal of product from the gas phase imparts a high commercial potential to the process, either for the production of particularly strong fibers or for the economic production of bulk quantities of carbon nanotubes. Tensile tests were performed on fibers produced from the dissociation of three different hydrocarbons, namely, ethanol, ethylene glycol, and hexane, with a range of iron (catalyst) concentrations. The conditions were chosen to lie within the range known to enable satisfactory continuous spinning, the iron concentration being varied within this range. Increasing proportions of single wall nanotubes were found as the iron concentration was decreased, conditions which also produced fibers of best strength and stiffness. The maximum tensile strength obtained was 1.46 GPa (equivalent to 0.70 N/tex assuming a density of 2.1 g/cm(3)). The experiments indicate that significant improvements in the mechanical properties can be accomplished by optimizing the process conditions. PMID:16089483

  2. Thermally induced changes in dynamic mechanical properties of native silks.

    PubMed

    Guan, Juan; Porter, David; Vollrath, Fritz

    2013-03-11

    Dynamic mechanical thermal analysis (DMTA) on individual native silk fibers demonstrates changes in the dynamic mechanical properties of storage modulus and loss tangent as a function of temperature and temperature history ranging from -100 to 250 °C. These property changes are linked quantitatively to two main types of change in the silk structure. First, the evaporation of water with increasing temperature up to 100 °C increases the storage modulus and removes two characteristic loss tangent peaks at -60 and +60 °C. Second, various discrete loss tangent peaks in the range 150-220 °C are associated with specific disordered silk structures that are removed or converted to a limiting high-temperature relaxed structure by the combination of increasing temperature and static load in the DMTA tests. The results identify important origins of silk filament quality based on the analysis of measurements that can be traced back to differences in production and processing history. PMID:23405856

  3. Mechanical properties of niobium radio-frequency cavities

    SciTech Connect

    Ciovati, Gianluigi; Dhakal, Pashupati; Matalevich, Joseph R.; Myneni, Ganapati Rao; Schmidt, A.; Iversen, J.; Matheisen, A.; Singer, W.

    2015-07-02

    Radio-frequency cavities made of bulk niobium are one of the components used in modern particle accelerators. The mechanical stability is an important aspect of cavity design, which typically relies on finite-element analysis simulations using material properties from tensile tests on sample. This contribution presents the results of strain and resonant frequency measurements as a function of a uniform pressure up to 722 kPa, applied to single-cell niobium cavities with different crystallographic structure, purity and treatments. In addition, burst tests of high-purity multi-cell cavities with different crystallographic structure have been conducted up to the tensile strength of the material. Finite-element analysis of the single-cell cavity geometry is in good agreement with the observed behavior in the elastic regime assuming a Young's modulus value of 88.5 GPa and a Poisson's ratio of 0.4, regardless of crystallographic structure, purity or treatment. However, the measured yield strength and tensile strength depend on crystallographic structure, material purity and treatment. In particular, the results from this study show that the mechanical properties of niobium cavities with large crystals are comparable to those of cavities made of fine-grain niobium.

  4. The mechanical properties of kinesin-1: a holistic approach.

    PubMed

    Jeppesen, George M; Hoerber, J K Heinrich

    2012-04-01

    During the last 25 years, a vast amount of research has gone into understanding the mechanochemical cycle of kinesin-1 and similar processive motor proteins. An experimental method that has been widely used to this effect is the in vitro study of kinesin-1 molecules moving along microtubules while pulling a bead, the position of which is monitored optically while trapped in a laser focus. Analysing results from such experiments, in which thermally excited water molecules are violently buffeting the system components, can be quite difficult. At low loads, the effect of the mechanical properties of the entire molecule must be taken into account, as stalk compliance means the bead position recorded is only weakly coupled to the movement of the motor domains, the sites of ATP hydrolysis and microtubule binding. In the present review, findings on the mechanical and functional properties of the various domains of full-length kinesin-1 molecules are summarized and a computer model is presented that uses this information to simulate the motion of a bead carried by a kinesin molecule along a microtubule, with and without a weak optical trap present. A video sequence made from individual steps of the simulation gives a three-dimensional visual insight into these types of experiment at the molecular level. PMID:22435827

  5. Mechanical Properties of a Calcium Dietary Supplement, Calcium Fumarate Trihydrate.

    PubMed

    Sun, Shijing; Henke, Sebastian; Wharmby, Michael T; Yeung, Hamish H-M; Li, Wei; Cheetham, Anthony K

    2015-12-01

    The mechanical properties of calcium fumarate trihydrate, a 1D coordination polymer considered for use as a calcium source for food and beverage enrichment, have been determined via nanoindentation and high-pressure X-ray diffraction with single crystals. The nanoindentation studies reveal that the elastic modulus (16.7-33.4 GPa, depending on crystallographic orientation), hardness (1.05-1.36 GPa), yield stress (0.70-0.90 GPa), and creep behavior (0.8-5.8 nm/s) can be rationalized in view of the anisotropic crystal structure; factors include the directionality of the inorganic Ca-O-Ca chain and hydrogen bonding, as well as the orientation of the fumarate ligands. High-pressure single-crystal X-ray diffraction studies show a bulk modulus of ∼ 20 GPa, which is indicative of elastic recovery intermediate between small molecule drug crystals and inorganic pharmaceutical ingredients. The combined use of nanoindentation and high-pressure X-ray diffraction techniques provides a complementary experimental approach for probing the critical mechanical properties related to tableting of these dietary supplements. PMID:26588472

  6. Biodegradable HEMA-based hydrogels with enhanced mechanical properties.

    PubMed

    Moghadam, Mohamadreza Nassajian; Pioletti, Dominique P

    2016-08-01

    Hydrogels are widely used in the biomedical field. Their main purposes are either to deliver biological active agents or to temporarily fill a defect until they degrade and are followed by new host tissue formation. However, for this latter application, biodegradable hydrogels are usually not capable to sustain any significant load. The development of biodegradable hydrogels presenting load-bearing capabilities would open new possibilities to utilize this class of material in the biomedical field. In this work, an original formulation of biodegradable photo-crosslinked hydrogels based on hydroxyethyl methacrylate (HEMA) is presented. The hydrogels consist of short-length poly(2-hydroxyethyl methacrylate) (PHEMA) chains in a star shape structure, obtained by introducing a tetra-functional chain transfer agent in the backbone of the hydrogels. They are cross-linked with a biodegradable N,O-dimethacryloyl hydroxylamine (DMHA) molecule sensitive to hydrolytic cleavage. We characterized the degradation properties of these hydrogels submitted to mechanical loadings. We showed that the developed hydrogels undergo long-term degradation and specially meet the two essential requirements of a biodegradable hydrogel suitable for load bearing applications: enhanced mechanical properties and low molecular weight degradation products. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1161-1169, 2016. PMID:26061346

  7. Thermo-Mechanical Processing and Properties of a Ductile Iron

    SciTech Connect

    Syn, C.K.; Lesuer, R.R.; Sherby, O.D.

    1997-07-14

    Thermo-mechanical processing of ductile irons is a potential method for enhancing their mechanical properties. A ductile cast iron containing 3.6% C, 2.6% Si and 0.045% Mg was continuously hot-and-warm rolled or one-step press-forged from a temperature in the austenite range (900{degrees}C-1100{degrees}C) to a temperature below the A, temperature. Various amounts of reduction were used (from 60% to more than 90%) followed by a short heat ent at 600`C. The heat ent lead to a structure of fine graphite in a matrix of ferrite and carbides. The hot-and- warm worked materials developed a pearlitic microstructure while the press-forged material developed a spheroidite-like carbide microstructure in the matrix. Cementite-denuded ferrite zones were developed around graphite stringers in the hot-and-warm worked materials, but such zones were absent in the press-forged material. Tensile properties including tensile strength and total elongation were measured along the direction parallel and transverse to the rolling direction and along the direction transverse to the press-forging direction. The tensile ductility and strength both increased with a decrease in the amount of hot-and-warm working. The press- forged materials showed higher strength (645 MPa) than the hot-and-warrn worked materials (575 MPa) when compared at the same ductility level (22% elongation).

  8. Glutaraldehyde-cross-linked meniscal allografts: mechanical properties.

    PubMed

    Wisnewski, P J; Powers, D L; Kennedy, J M

    1988-01-01

    Removal of a severely damaged medial meniscus has been shown to lead to degradation of the articular cartilage and formation of degenerative arthritis. To counter this degenerative effect, meniscal prostheses, including glutaraldehyde-cross-linked allografts, have been evaluated in dogs. The purpose of this research was to quantify the mechanical properties of both fresh and glutaraldehyde-cross-linked canine medial menisci. Mechanical properties quantified were tensile strength, tensile modulus, and compressive stiffness. In addition, water content of compressive test samples was measured. Analysis of variance showed significantly lower tensile strength and tensile modulus and significantly higher compressive stiffness for the glutaraldehyde-cross-linked menisci, as compared to fresh specimens. Measurement of the weight percentage of water in fresh and cross-linked samples revealed no significant differences in water content. When implanted into a joint, the increased compressive stiffness could increase the peripheral tensile load. Due to the decreased tensile strength in this region, the prosthetic meniscus could be susceptible to peripheral tears. PMID:3155295

  9. Mechanical and structural property analysis of bacterial cellulose composites.

    PubMed

    Dayal, Manmeet Singh; Catchmark, Jeffrey M

    2016-06-25

    Bacterial cellulose (BC) exhibits unique properties including high mechanical strength and high crystallinity. Improvement in the mechanical properties of BC is sought for many applications ranging from food to structural composites to biomedical materials. In this study, different additives including carboxymethyl cellulose (CMC), pectin, gelatin, cornstarch, and corn steep liquor were included in the fermentation media to alter the BC produced. Three different concentrations (1%, 3% and 5%) were chosen for each of the additives, with no additive (0%) as the control. The produced BC was then analyzed to determine tensile and compression modulus. Amongst the tested additives, BC produced in media containing 3% (w/v) pectin had the maximum compressive modulus (142kPa), and BC produced in media containing 1% (w/v) gelatin exhibited the maximum tensile modulus (21MPa). Structural characteristics of BC and BC-additive composites were compared using X-Ray diffraction (XRD). The crystal size and crystallinity of BC was reduced when grown in the presence of CMC and gelatin while pectin only decreased the crystallite size. This suggested that CMC and gelatin may be incorporated into the BC fibril structure. The field emission scanning electron microscopy (FESEM) images showed the increased micro-fibril aggregation in BC pellicles grown in the presence of additives to the culture media. PMID:27083837

  10. Structure and mechanical properties of irradiated magnesium aluminate spinel

    NASA Astrophysics Data System (ADS)

    Devanathan, R.; Yu, N.; Sickafus, K. E.; Nastasi, M.

    1996-09-01

    The relationship between structure and mechanical properties of MgAl 2O 4 spinel single crystals following 400 keV Xe 2+ irradiation at 100 K to doses up to 1 × 10 20 ions/m 2 was examined. The structural changes in the irradiated layer were studied using electron diffraction from cross-sectional samples. The nano-indentation technique was used to determine the mechanical properties. At low doses, the material transformed into a metastable crystalline phase characterized by the rearrangement of cations. At the onset of this transformation, the Young's modulus and hardness rose to values about 10 and 15% higher, respectively, than those of the unirradiated crystal. Upon further irradiation, the metastable crystal became amorphous. The Young's modulus and hardness of the amorphous state were about 30 and 60% less, respectively, than the corresponding values of unirradiated spinel. These results, in conjunction with the findings of a recent computer simulation study, provide important insights into the exceptional radiation resistance of magnesium aluminate spinel.

  11. Mechanical properties of irradiated multi-phase polycrystalline BCC materials

    NASA Astrophysics Data System (ADS)

    Song, Dingkun; Xiao, Xiazi; Xue, Jianming; Chu, Haijian; Duan, Huiling

    2015-04-01

    Structure materials under severe irradiations in nuclear environments are known to degrade because of irradiation hardening and loss of ductility, resulting from irradiation-induced defects such as vacancies, interstitials and dislocation loops, etc. In this paper, we develop an elastic-viscoplastic model for irradiated multi-phase polycrystalline BCC materials in which the mechanical behaviors of individual grains and polycrystalline aggregates are both explored. At the microscopic grain scale, we use the internal variable model and propose a new tensorial damage descriptor to represent the geometry character of the defect loop, which facilitates the analysis of the defect loop evolutions and dislocation-defect interactions. At the macroscopic polycrystal scale, the self-consistent scheme is extended to consider the multiphase problem and used to bridge the individual grain behavior to polycrystal properties. Based on the proposed model, we found that the work-hardening coefficient decreases with the increase of irradiation-induced defect loops, and the orientation/loading dependence of mechanical properties is mainly attributed to the different Schmid factors. At the polycrystalline scale, numerical results for pure Fe match well with the irradiation experiment data. The model is further extended to predict the hardening effect of dispersoids in oxide-dispersed strengthened steels by the considering the Orowan bowing. The influences of grain size and irradiation are found to compete to dominate the strengthening behaviors of materials.

  12. Photoacoustic characterization of the mechanical properties of thin film materials

    NASA Astrophysics Data System (ADS)

    Zhang, Feifei; Krishnaswamy, Sridhar; Fei, Dong; Rebinsky, Douglas A.

    2005-05-01

    Two high frequency photoacoustic techniques were applied to investigate the mechanical properties of two sets of thin film materials in this work. Broadband photoacoustic guided-wave method was used to measure the guided-wave phase velocity dispersion curves of nano-structured diamond-like carbon hard coatings. The experimental velocity spectra were analyzed by a nonlinear optimization approach in conjunction with a multi-layer wave-propagation model. The derived Young"s moduli using the broadband photoacoustic technique were compared with line-focus acoustic microscopy and nano-indentation tests and good quantitative agreement is found. In a second set of experiments, ultra-thin two-layer aluminum and silicon nitride thin film materials were tested using the femtosecond transient pump-probe method using high frequency bulk waves generated by the ultra-fast laser pulses. The measured moduli of silicon nitride thin layers are in the range of 270 - 340 GPa. Photoacoustic methods are shown to be suitable for in-situ and non-destructive evaluation of the mechanical properties of thin films.

  13. Mechanical properties of niobium radio-frequency cavities

    DOE PAGESBeta

    Ciovati, Gianluigi; Dhakal, Pashupati; Matalevich, Joseph R.; Myneni, Ganapati Rao; Schmidt, A.; Iversen, J.; Matheisen, A.; Singer, W.

    2015-07-02

    Radio-frequency cavities made of bulk niobium are one of the components used in modern particle accelerators. The mechanical stability is an important aspect of cavity design, which typically relies on finite-element analysis simulations using material properties from tensile tests on sample. This contribution presents the results of strain and resonant frequency measurements as a function of a uniform pressure up to 722 kPa, applied to single-cell niobium cavities with different crystallographic structure, purity and treatments. In addition, burst tests of high-purity multi-cell cavities with different crystallographic structure have been conducted up to the tensile strength of the material. Finite-element analysismore » of the single-cell cavity geometry is in good agreement with the observed behavior in the elastic regime assuming a Young's modulus value of 88.5 GPa and a Poisson's ratio of 0.4, regardless of crystallographic structure, purity or treatment. However, the measured yield strength and tensile strength depend on crystallographic structure, material purity and treatment. In particular, the results from this study show that the mechanical properties of niobium cavities with large crystals are comparable to those of cavities made of fine-grain niobium.« less

  14. Electronic and Mechanical Properties of Hydrogenated Irradiated and Amorphous Graphene

    NASA Astrophysics Data System (ADS)

    Weerasinghe, Asanka; Ramasubramaniam, Ashwin; Maroudas, Dimitrios

    Defect engineering and chemical functionalization of graphene are promising routes for fabrication of carbon nanostructures and 2D metamaterials with unique properties and function. Here, we use hydrogenation of irradiated, including irradiation-induced amorphous, graphene as a means of studying chemical functionalization effects on its electronic structure and mechanical response. We use molecular-dynamics simulations based on a reliable bond-order potential to prepare the hydrogenated configurations and carry out dynamic deformation tests at constant strain rate and temperature. Our mechanical tests show that hydrogenation does not affect the ultimate tensile strength (UTS) of the irradiated graphene sheet if the hydrogenated C atoms remain sp2-hybridized; however, upon inducing sp3 hybridization of these C atoms, UTS decreases by about 10 GPa. Furthermore, the fracture strain of the irradiated structure decreases by up to 30% upon hydrogenation independent of the hybridization type. We also report results for the electronic structure of hydrogenated configurations based on a density-functional tight-binding approach and assess the potential for tuning the electronic properties of these defective, functionalized graphenes.

  15. Simultaneous spectrophotometric and mechanical property characterization of skin

    NASA Astrophysics Data System (ADS)

    Bunegin, Leonid; Moore, Jeffery B.

    2006-02-01

    Both reflectance spectroscopy and the determination Young's Modulus of skin have shown promise for identifying skin pathology. At present, these determinations are carried out using separate methodologies. This study demonstrates a new technology combining digital UV/VIS reflectance spectroscopy and vacuum aspiration for simultaneously determining the reflectance spectrum and mechanical properties of human skin tissue. A small hand held prototype device incorporating fiber-optic light guides into a vacuum channel was calibrated using various elastic materials subjected to increments of stress by vacuum from 0 to 25 in Hg. The intensity of a UV/VIS light beam reflected from the material at each vacuum increment was compared to the resulting material strain. The reflected beam was also spectrophotometrically analyzed. Skin types were similarly evaluated comparing normal and scar tissue and skin of various ages and coloration. An exponential relationship between reflected beam intensity and the amount of strain resulting from vacuum increments was observed. Young's Modulus (calculated from Aoki et. al equation) and spectra from normal skin and scar tissue were in agreement with previously published observations. Age related decreases in skin elasticity were also demonstrated. In the reflectance spectra, oxy and deoxy-hemoglobin absorbance bands were detected, becoming significantly enhanced at increased levels of vacuum. Melanin absorbance was also easily detected and appeared to correlate with skin coloration. Since superficial skin pathologies have characteristic spectroscopic and mechanical properties, this technique may provide a promising new approach for rapid, non-invasive method for the evaluation of skin lesions.

  16. Measurement of Mechanical Properties of Soft Tissue with Ultrasound Vibrometry

    NASA Astrophysics Data System (ADS)

    Nenadich, I.; Bernal, M.; Greenleaf, J. F.

    The cardiovascular diseases atherosclerosis, coronary artery disease, hypertension and heart failure have been related to stiffening of vessels and myocardium. Noninvasive measurements of mechanical properties of cardiovascular tissue would facilitate detection and treatment of disease in early stages, thus reducing mortality and possibly reducing cost of treatment. While techniques capable of measuring tissue elasticity have been reported, the knowledge of both elasticity and viscosity is necessary to fully characterize mechanical properties of soft tissues. In this article, we summarize the Shearwave Dispersion Ultrasound Vibrometry (SDUV) method developed by our group and report on advances made in characterizing stiffness of large vessels and myocardium. The method uses radiation forceFadiation force to excite shear waves in soft tissue and pulse echo ultrasound to measure the motion. The speed of propagation of shear waves at different frequencies is used to generate dispersions curves for excised porcine left-ventricular free-wall myocardium and carotid arteries. An antisymmetric Lamb wave model was fitted to the LV myocardium dispersion curves to obtain elasticity and viscosity moduli. The results suggest that the speed of shear wave propagation in four orthogonal directions on the surface of the excised myocardium is similar. These studies show that the SDUV method has potential for clinical application in noninvasive quantification of elasticity and viscosity of vessels and myocardium.

  17. The mechanical properties of three types of carbon allotropes.

    PubMed

    Zhao, Junhua; Wei, Ning; Fan, Zhezhong; Jiang, Jin-Wu; Rabczuk, Timon

    2013-03-01

    The mechanical properties of supergraphene, cyclicgraphene and graphyne are studied using molecular dynamics simulations based on the AIREBO potential. In particular, we present the chirality-dependence of their mechanical properties, including Young's moduli, shear moduli, Poisson's ratios, ultimate strength and ultimate strains. The relationship of their Young moduli, shear moduli and Poisson ratios is in the order of Y(su) (super) < Y(cy) (cyclic) < Y(gy) (graphyne) < Y(ge) (graphene), G(su) < G(cy) < G(gy) < G(ge) and v(su) > v(cy) > v(gy) > v(ge) in corresponding zigzag and armchair sheets, respectively. Their intersheet adhesion energy is obtained as γ(su) = 30, γ(cy) = 99 and γ(gy) = 149 mJ m(-2), which are much lower than that of γ(ge) = 291 mJ m(-2) (the value is in good agreement with the latest experimental result γ(ge) = 310 ± 30 mJ m(-2)). The obtained adhesion energy is accurately characterized by continuum modeling of the van der Waals interactions. Our study is very useful for the future applications of graphene-like materials in nanoelectromechanical systems. PMID:23396063

  18. Mechanical and Electrical Properties of Aluminum/Epoxy Nanocomposites

    NASA Astrophysics Data System (ADS)

    Dong, Lina; Zhou, Wenying; Sui, Xuezhen; Wang, Zijun; Cai, Huiwu; Wu, Peng; Zhang, Yating; Zhou, Anning

    2016-07-01

    Surface-modified self-passivated aluminum (Al) nanoparticles were used for reinforcing epoxy (EP) resin, and the curing behavior, mechanical and electrical properties of the Al/EP nanocomposites were investigated. The incorporation of Al nanoparticles into EP significantly decreases the cure reaction enthalpy of the nancomposites, and the apparent activation energy of Al/EP systems is 64.96 kJ/mol. The coefficient of thermal expansion of the nanocomposites decreases with increasing the Al loading due to the strong interaction between the Al and the EP matrix. The storage modulus of the nanocomposites increases continuously with Al content, whereas, the glass transition temperature declines slightly. With increasing the Al content, the tensile modulus, flexural modulus and compressive modulus of the nanocomposites increase continuously compared with the neat one. The mechanical properties are improved by Al nanoparticles at low Al contents. The best overall dielectric and electrical performance are achieved about at 1 wt.% of Al concentration. The enhanced dielectric breakdown strength is mainly related to the insulating alumina shell on the surface of core Al and the strong interfacial interactions.

  19. Robotic palpation and mechanical property characterization for abnormal tissue localization.

    PubMed

    Ahn, Bummo; Kim, Yeongjin; Oh, Cheol Kyu; Kim, Jung

    2012-09-01

    Palpation is an intuitive examination procedure in which the kinesthetic and tactile sensations of the physician are used. Although it has been widely used to detect and localize diseased tissues in many clinical fields, the procedure is subjective and dependent on the experience of the individual physician. Palpation results and biomechanics-based mechanical property characterization are possible solutions that can enable the acquisition of objective and quantitative information on abnormal tissue localization during diagnosis and surgery. This paper presents an integrated approach for robotic palpation combined with biomechanical soft tissue characterization. In particular, we propose a new palpation method that is inspired by the actual finger motions that occur during palpation procedures. To validate the proposed method, robotic palpation experiments on silicone soft tissue phantoms with embedded hard inclusions were performed and the force responses of the phantoms were measured using a robotic palpation system. Furthermore, we carried out a numerical analysis, simulating the experiments and estimating the objective and quantitative properties of the tissues. The results indicate that the proposed approach can differentiate diseased tissue from normal tissue and can characterize the mechanical information of diseased tissue, which means that this method can be applied as a means of abnormality localization to diagnose prostate cancers. PMID:22772733

  20. Dynamic mechanical and swelling properties of maleated hyaluronic acid hydrogels.

    PubMed

    Lin, Hai; Liu, Jun; Zhang, Kai; Fan, Yujiang; Zhang, Xingdong

    2015-06-01

    A series of maleated hyaluronan (MaHA) are developed by modification with maleic anhydride. The degrees of substitution (DS) of MaHA vary between 7% and 75%. The DS of MaHA is both higher and wider than methacrylated HA derivatives (MeHA) reported in the literature. MaHA hydrogels are then prepared by photopolymerization and their dynamic mechanical and swelling properties of the hydrogels are investigated. The results showed that MaHA hydrogels with moderate DS (25%, 50% and 65%) have higher storage modulus and lower equilibrium swelling ratios than those with either low or high DS (7%, 15% and 75%). Theoretical analyses also suggest a similar pattern among hydrogels with different DS. The results confirm that the increased cross-linking density enhances the strength of hydrogels. Meanwhile, the hydrophilicity of introduced groups during modification and the degree of incomplete crosslinking reaction might have negative impact on the mechanical and swelling properties of MaHA hydrogels. PMID:25843871

  1. Mechanical and Electromechanical Properties of Semiconducting and Metallic Nanowires

    NASA Astrophysics Data System (ADS)

    Bernal Montoya, Rodrigo A.

    Nanowires are envisioned as the building blocks of future electronics, sensing and actuation devices, nanostructured materials, among many applications. This technological potential arises because the properties of nanowires tend to be superior to those of bulk structures. However, unambiguous characterization of these properties has not been yet achieved, due to the challenging nature of nanoscale experimentation. In this thesis, we aimed at advancing the unambiguous characterization of mechanical and electromechanical properties of nanowires, by employing and improving MEMS-based (Microelectromechanical Systems) characterization technologies, which allow in-situ electron microscopy testing. Furthermore, we coupled the experimental results with atomistic simulations in order to attain fundamental understanding, and allow the determination of structure-property relations. This synergy between experiments and simulations also provides guidelines for improvements in both the experimental and computational techniques. In the context of semiconducting specimens, we characterized the elastic modulus of GaN nanowires. We find that below 20 nm in diameter, the nanowires display enhanced elastic moduli. Above this size, nanowires show bulk behavior. The measured trends are consistent both in experiments and simulations. The modulus enhancement is caused by local contraction of the atomic bonds near the surface of the nanowires, which leads to a locally higher modulus at the surface. For metallic specimens, we characterized the mechanical behavior of fivefold-twinned silver nanowires below 120 nm in diameter. To better match the loading condition between experiments and simulations, we implement a MEMS device for displacement-controlled testing, and subsequently employ it to characterize the cyclic plastic behavior of the nanowires. Experimentally, Bauschinger effect and partial recovery of the plastic deformation are observed. In-situ TEM experiments and atomistic

  2. In vivo penetration mechanics and mechanical properties of mouse brain tissue at micrometer scales.

    PubMed

    Sharp, Andrew A; Ortega, Alicia M; Restrepo, Diego; Curran-Everett, Douglas; Gall, Ken

    2009-01-01

    Substantial advancement in the understanding of the neuronal basis of behavior and the treatment of neurological disorders has been achieved via the implantation of various devices into the brain. To design and optimize the next generation of neuronal implants while striving to minimize tissue damage, it is necessary to understand the mechanics of probe insertion at relevant length scales. Unfortunately, a broad-based understanding of brain-implant interactions at the necessary micrometer scales is largely missing. This paper presents a generalizable description of the micrometer-scale penetration mechanics and material properties of mouse brain tissue in vivo. Cylindrical stainless steel probes were inserted into the cerebral cortex and olfactory bulb of mice. The effects of probe size, probe geometry, insertion rate, insertion location, animal age, and the presence of the dura and pia on the resulting forces were measured continuously throughout probe insertion and removal. Material properties (modulus, cutting force, and frictional force) were extracted using mechanical analysis. The use of rigid, incompressible, cylindrical probes allows for a general understanding of how probe design and insertion methods influence the penetration mechanics of brain tissue in vivo that can be applied to the quantitative design of most future implantable devices. PMID:19224718

  3. Microstructure and Mechanical Properties of a Nitride-Strengthened Reduced Activation Ferritic/Martensitic Steel

    NASA Astrophysics Data System (ADS)

    Zhou, Qiangguo; Zhang, Wenfeng; Yan, Wei; Wang, Wei; Sha, Wei; Shan, Yiyin; Yang, Ke

    2012-12-01

    Nitride-strengthened reduced activation ferritic/martensitic (RAFM) steels are developed taking advantage of the high thermal stability of nitrides. In the current study, the microstructure and mechanical properties of a nitride-strengthened RAFM steel with improved composition were investigated. Fully martensitic microstructure with fine nitrides dispersion was achieved in the steel. In all, 1.4 pct Mn is sufficient to suppress delta ferrite and assure the steel of the full martensitic microstructure. Compared to Eurofer97, the steel showed similar strength at room temperature but higher strength at 873 K (600 °C). The steel exhibited very high impact toughness and a low ductile-to-brittle transition temperature (DBTT) of 243 K (-30 °C), which could be further reduced by purification.

  4. Mechanical Properties of Gels; Stress from Confined Fluids

    SciTech Connect

    George W. Scherer

    2009-12-01

    Abstract for Grant DE-FG02-97ER45642 Period: 1997-2002 Mechanical Properties of Gels 2002-2008 Stress from Confined Fluids Principal investigator: Prof. George W. Scherer Dept. Civil & Env. Eng./PRISM Eng. Quad. E-319 Princeton, NJ 08544 USA Recipient organization: Trustees of Princeton University 4 New South Princeton, NJ 08544 USA Abstract: The initial stage of this project, entitled Mechanical Properties of Gels, was dedicated to characterizing and explaining the properties of inorganic gels. Such materials, made by sol-gel processing, are of interest for fabrication of films, fibers, optical devices, advanced insulation and other uses. However, their poor mechanical properties are an impediment in some applications, so understanding the origin of these properties could lead to enhanced performance. Novel experimental methods were developed and applied to measure the stiffness and permeability of gels and aerogels. Numerical simulations were developed to reproduce the growth process of the gels, resulting in structures whose mechanical properties matched the measurements. The models showed that the gels are formed by the growth of relatively robust clusters of molecules that are joined by tenuous links whose compliance compromises the stiffness of the structure. Therefore, synthetic methods that enhance the links could significantly increase the rigidity of such gels. The next stage of the project focused on Stress from Confined Fluids. The first problem of interest was the enhanced thermal expansion coefficient of water that we measured in the nanometric pores of cement paste. This could have a deleterious effect on the resistance of concrete to rapid heating in fires, because the excessive thermal expansion of water in the pores of the concrete could lead to spalling and collapse. A series of experiments demonstrated that the expansion of water increases as the pore size decreases. To explain this behavior, we undertook a collaboration with Prof. Stephen

  5. Amorphous calcium phosphate composites with improved mechanical properties

    PubMed Central

    O’Donnell, J.N.R.; Antonucci, J.M.; Skrtic, D.

    2008-01-01

    Hybridized zirconium amorphous calcium phosphate (ACP)-filled methacrylate composites make good calcium and phosphate releasing materials for anti-demineralizing/remineralizing applications with low mechanical demands. The objective of this study was to assess the effect of the particle size of the filler on the mechanical properties of these composites. Photo-curable resins were formulated from ethoxylated bisphenol A dimethacrylate, triethylene glycol dimethacrylate, 2-hydroxyethyl methacrylate and methacryloxyethyl phthalate. Camphorquinone and ethyl-4-N,N-dimethylaminobenzoate were utilized as components of the photoinitiator system. After 2 h of mechanical milling in isopropanol, an approximate 64 % reduction in the median particle diameter was observed [27.48 μm vs. 9.98 μm] for unmilled and milled wet ACP, respectively. Dry ACP showed a 43 % reduction in particle size from pre- to post-milling. As well as dry composites, those that had been immersed in aqueous media were evaluated for their Young’s Modulus, water sorption, biaxial tensile, three-point flexural and diametral tensile strength. Mechanically milling the filler increased the volume of fine particles in the composite specimens, resulting in a more homogeneous intra-composite distribution of ACP and a reduction in voids. In turn, less water diffused into the milled composites upon aqueous exposure, and they showed a marked improvement in biaxial flexure strength and a moderate improvement in flexural strength over composites with unmilled ACP. The demonstrated improvement in the mechanical stability of milled Zr-ACP composites may help in extending their dental applicability. PMID:18688290

  6. Designing the Structure of Carbon Fibers for Optimal Mechanical Properties

    SciTech Connect

    Ozcan, Soydan; Vautard, Frederic; Naskar, Amit K

    2014-01-01

    Carbon fiber manufacturing follows generic processing steps: formation of thermoplastic fibers, stabilization, and carbonization. The final structures and end properties of the carbon fiber can differ significantly depending on the precursor chemistry and the associated processing sciences. Polyacrylonitrile (PAN) and mesophase pitch are the predominant precursors used in the production of carbon fibers. PAN-based carbon fibers consist of nanocrystalline graphitic domains typically 1.5 5 nm in size surrounded by amorphous carbon; in contrast, pitch-based carbon fibers are 10 50 nm crystallites with the graphitic (002) planes mostly aligned parallel to the fiber axis. It has been seen that the skin core structure of PAN-based carbon fibers plays a significant role in their mechanical properties. Designing a more homogenous carbon fiber microstructure by controlling the starting polymer and process parameters results in a different set of tensile strengths and elastic moduli. In this study the microstructural defect distribution (0.1 200 nm), measured by small-angle X-ray scattering, was shown to be directly related to the tensile strength of the carbon fibers. Here the formation of carbon structures from various polymer precursors is reviewed. Such a comprehensive understanding offers the opportunity to design carbon fiber microstructures with improved properties and to ultimately create new types of carbon fibers from alternative precursors at reduced cost.

  7. Mechanical and thermal properties of bulk ZrB2

    NASA Astrophysics Data System (ADS)

    Nakamori, Fumihiro; Ohishi, Yuji; Muta, Hiroaki; Kurosaki, Ken; Fukumoto, Ken-ichi; Yamanaka, Shinsuke

    2015-12-01

    ZrB2 appears to have formed in the fuel debris at the Fukushima Daiichi nuclear disaster site, through the reaction between Zircaloy cladding materials and the control rod material B4C. Since ZrB2 has a high melting point of 3518 K, the ceramic has been widely studied as a heat-resistant material. Although various studies on the thermochemical and thermophysical properties have been performed for ZrB2, significant differences exist in the data, possibly due to impurities or the porosity within the studied samples. In the present study, we have prepared a ZrB2 bulk sample with 93.1% theoretical density by sintering ZrB2 powder. On this sample, we have comprehensively examined the thermal and mechanical properties of ZrB2 by the measurement of specific heat, ultrasonic sound velocities, thermal diffusivity, and thermal expansion. Vickers hardness and fracture toughness were also measured and found to be 13-23 GPa and 1.8-2.8 MPa m0.5, respectively. The relationships between these properties were carefully examined in the present study.

  8. Antibacterial properties and mechanisms of gold-silver nanocages

    NASA Astrophysics Data System (ADS)

    Wang, Yulan; Wan, Jiangshan; Miron, Richard J.; Zhao, Yanbin; Zhang, Yufeng

    2016-05-01

    Despite the number of antibiotics used in routine clinical practice, bacterial infections continue to be one of the most important challenges faced in humans. The main concerns arise from the continuing emergence of antibiotic-resistant bacteria and the difficulties faced with the pharmaceutical development of new antibiotics. Thus, advancements in the avenue of novel antibacterial agents are essential. In this study, gold (Au) was combined with silver (Ag), a well-known antibacterial material, to form silver nanoparticles producing a gold-silver alloy structure with hollow interiors and porous walls (gold-silver nanocage). This novel material was promising in antibacterial applications due to its better biocompatibility than Ag nanoparticles, potential in photothermal effects and drug delivery ability. The gold-silver nanocage was then tested for its antibacterial properties and the mechanism involved leading to its antibacterial properties. This study confirms that this novel gold-silver nanocage has broad-spectrum antibacterial properties exerting its effects through the destruction of the cell membrane, production of reactive oxygen species (ROS) and induction of cell apoptosis. Therefore, we introduce a novel gold-silver nanocage that serves as a potential nanocarrier for the future delivery of antibiotics.

  9. Microstructure and Mechanical Properties of Composite Actin Networks

    NASA Astrophysics Data System (ADS)

    Gardel, Margaret; Shin, Jennifer; Mahadevan, L.; Matsudaira, Paul; Weitz, D. A.

    2003-03-01

    There exits a family of actin-binding proteins (ABPs) and each protein has a distinct function for bundling, networking, gelating, capping, or simply binding to actin. Whether actin serves as a structural or motile component, its mechanical properties are determined by its degree and kinds of association with different ABPs and these properties are often closely related to its functional needs. For instance, in a cell actin is highly crosslinked with multiple ABPs (fimbrin, alpha-actinin, etc.) to generate thrust and strength for locomotion. In the acrosomal reaction of horseshoe crab sperm, actin exists as a bundle of preassembled filaments crosslinked with scruin to form a rigid structure to penetrate into an egg without yielding. We study the effects three different ABPs (scruin,fimbrin and alpha-actinin) have on the rheology and microstructure of actin networks using multiparticle tracking, imaging, and bulk rheology. From these experiments we can deduce how an evolving microstructure affects the bulk rheological properties and the role different concentrations and kinds of ABPs have in these changes.

  10. Antibacterial properties and mechanisms of gold-silver nanocages.

    PubMed

    Wang, Yulan; Wan, Jiangshan; Miron, Richard J; Zhao, Yanbin; Zhang, Yufeng

    2016-06-01

    Despite the number of antibiotics used in routine clinical practice, bacterial infections continue to be one of the most important challenges faced in humans. The main concerns arise from the continuing emergence of antibiotic-resistant bacteria and the difficulties faced with the pharmaceutical development of new antibiotics. Thus, advancements in the avenue of novel antibacterial agents are essential. In this study, gold (Au) was combined with silver (Ag), a well-known antibacterial material, to form silver nanoparticles producing a gold-silver alloy structure with hollow interiors and porous walls (gold-silver nanocage). This novel material was promising in antibacterial applications due to its better biocompatibility than Ag nanoparticles, potential in photothermal effects and drug delivery ability. The gold-silver nanocage was then tested for its antibacterial properties and the mechanism involved leading to its antibacterial properties. This study confirms that this novel gold-silver nanocage has broad-spectrum antibacterial properties exerting its effects through the destruction of the cell membrane, production of reactive oxygen species (ROS) and induction of cell apoptosis. Therefore, we introduce a novel gold-silver nanocage that serves as a potential nanocarrier for the future delivery of antibiotics. PMID:27180869

  11. Mechanical Properties of K Basin Sludge Constituents and Their Surrogates

    SciTech Connect

    Delegard, Calvin H.; Schmidt, Andrew J.; Chenault, Jeffrey W.

    2004-12-06

    A survey of the technical literature was performed to summarize the mechanical properties of inorganic components in K Basins sludge. The components included gibbsite, ferrihydrite, lepidocrocite and goethite, hematite, quartz, anorthite, calcite, basalt, Zircaloy, aluminum, and, in particular, irradiated uranium metal and uranium dioxide. Review of the technical literature showed that information on the hardness of uranium metal at irradiation exposures similar to those experienced by the N Reactor fuel present in the K Basins (typically up to 3000 MWd/t) were not available. Measurements therefore were performed to determine the hardness of coupons taken from three irradiated N Reactor uranium metal fuel elements taken from K Basins. Hardness values averaged 30 {+-} 8 Rockwell C units, similar to values previously reported for uranium irradiated to {approx}1200 MWd/t. The physical properties of candidate uranium metal and uranium dioxide surrogates were gathered and compared. Surrogates having properties closest to those of irradiated uranium metal appear to be alloys of tungsten. The surrogate for uranium dioxide, present both as particles and agglomerates in actual K Basin sludge, likely requires two materials. Cerium oxide, CeO2, was identified as a surrogate of the smaller UO2 particles while steel grit was identified for the UO2 agglomerates.

  12. The mechanical properties of phase separated protein droplets

    NASA Astrophysics Data System (ADS)

    Jawerth, Louise; Ijavi, Mahdiye; Patel, Avinash; Saha, Shambaditya; Jülicher, Frank; Hyman, Anthony

    In vivo, numerous proteins associate into liquid compartments by de-mixing from the surrounding solution, similar to oil molecules in water. Many of these proteins and their corresponding liquid compartments play a crucial role in important biological processes, for instance germ line specification in C. elegans or in neurodegenerative diseases such as Amyotrophic lateral sclerosis (ALS). However, despite their importance, very little is known about the physical properties of the resulting droplets as well as the physical mechanisms that control their phase separation from solution. To gain a deeper understanding of these aspects, we study a few such proteins in vitro. When these proteins are purified and added to a physiological buffer, they phase separate into droplets ranging in size from a few to tens of microns with liquid-like behavior similar to their physiological counterparts. By attaching small beads to the surface of the droplets, we can deform the droplets by manipulating the beads directly using optical tweezers. By measuring the force required to deform the droplets we determine their surface tension, elasticity and viscosity as well as the frequency response of these properties. We also measure these properties using passive micro-rheology.

  13. Biocompatibility of calcium phosphate bone cement with optimized mechanical properties

    PubMed Central

    Palmer, Iwan; Nelson, John; Schatton, Wolfgang; Dunne, Nicholas J.; Buchanan, Fraser J.; Clarke, Susan A.

    2015-01-01

    Abstract The broad aim of this work was to investigate and optimize the properties of calcium phosphate bone cements (CPCs) for use in vertebroplasty to achieve effective primary fixation of spinal fractures. The incorporation of collagen, both bovine and from a marine sponge (Chondrosia reniformis), into a CPC was investigated. The biological properties of the CPC and collagen–CPC composites were assessed in vitro through the use of human bone marrow stromal cells. Cytotoxicity, proliferation, and osteoblastic differentiation were evaluated using lactate dehydrogenase, PicoGreen, and alkaline phosphatase activity assays, respectively. The addition of both types of collagen resulted in an increase in cytotoxicity, albeit not to a clinically relevant level. Cellular proliferation after 1, 7, and 14 days was unchanged. The osteogenic potential of the CPC was reduced through the addition of bovine collagen but remained unchanged in the case of the marine collagen. These findings, coupled with previous work showing that incorporation of marine collagen in this way can improve the physical properties of CPCs, suggest that such a composite may offer an alternative to CPCs in applications where low setting times and higher mechanical stability are important. © 2015 The Authors. Journal of Biomedical Materials Research Part B: Applied Biomaterials Published by Wiley Periodicals, Inc. 104B:308–315, 2015. PMID:25766271

  14. Mechanical properties of the porcine bile duct wall

    PubMed Central

    Duch, Birgitte U; Andersen, Helle; Gregersen, Hans

    2004-01-01

    Background and Aim The function of the common bile duct is to transport bile from the liver and the gall bladder to the duodenum. Since the bile duct is a distensible tube consisting mainly of connective tissue, it is important to obtain data on the passive mechanical wall properties. The aims of this study were to study morphometric and biomechanical wall properties during distension of the bile duct. Methods Ten normal porcine common bile ducts were examined in vitro. A computer-controlled volume ramp infusion system with concomitant pressure recordings was constructed. A video camera provided simultaneous measurement of outer dimensions of the common bile duct. Wall stresses and strains were computed. Results The common bile duct length increased by 25% from 24.4 ± 1.8 mm at zero pressure to 30.5 ± 2.0 mm at 5 kPa (p < 0.01). The diameter increased less than 10% in the same pressure range from 8.6 ± 0.4 mm to 9.3 ± 0.4 mm (p < 0.01). The stress-strain relations showed an exponential behavior with a good fit to the equation: σ = α . (exp(βε) - 1). The circumferential stress-strain curve was shifted to the left when compared to the longitudinal stress-strain curve, i.e. the linear constants (α values) were different (p < 0.01) whereas the exponential constants (β values) did not differ (p > 0.5). Conclusion The porcine bile duct exhibited nonlinear anisotropic mechanical properties. PMID:15260881

  15. Mechanical properties and clinical applications of orthodontic wires.

    PubMed

    Kapila, S; Sachdeva, R

    1989-08-01

    This review article describes the mechanical properties and clinical applications of stainless steel, cobalt-chromium, nickel-titanium, beta-titanium, and multistranded wires. The consolidation of this literature will provide the clinician with the basic working knowledge on orthodontic wire characteristics and usage. Mechanical properties of these wires are generally assessed by tensile, bending, and torsional tests. Although wire characteristics determined by these tests do not necessarily reflect the behavior of the wires under clinical conditions, they provide a basis for comparison of these wires. The characteristics desirable in an orthodontic wire are a large springback, low stiffness, good formability, high stored energy, biocompatibility and environmental stability, low surface friction, and the capability to be welded or soldered to auxiliaries. Stainless steel wires have remained popular since their introduction to orthodontics because of their formability, biocompatibility and environmental stability, stiffness, resilience, and low cost. Cobalt-chromium (Co-Cr) wires can be manipulated in a softened state and then subjected to heat treatment. Heat treatment of Co-Cr wires results in a wire with properties similar to those of stainless steel. Nitinol wires have a good springback and low stiffness. This alloy, however, has poor formability and joinability. Beta-titanium wires provide a combination of adequate springback, average stiffness, good formability, and can be welded to auxiliaries. Multistranded wires have a high springback and low stiffness when compared with solid stainless steel wires. Optimal use of these orthodontic wires can be made by carefully selecting the appropriate wire type and size to meet the demands of a particular clinical situation. PMID:2667330

  16. Uniaxial and biaxial mechanical properties of porcine linea alba.

    PubMed

    Cooney, Gerard M; Moerman, Kevin M; Takaza, Michael; Winter, Des C; Simms, Ciaran K

    2015-01-01

    Incisional hernia is a severe complication post-laparoscopic/laparotomy surgery that is commonly associated with the linea alba. However, the few studies on the mechanical properties of the linea alba in the literature appear contradictory, possible due to challenges with the physical dimensions of samples and variations in protocol. This study focuses on the tensile mechanical characterisation of the porcine linea alba, as determined by uniaxial and equi-load biaxial testing using image-based strain measurement methods. Results show that the linea alba demonstrated a non-linear elastic, anisotropic behaviour which is often observed in biological soft tissues. The transverse direction (parallel to fibres) was found to be approximately eight times stiffer than the longitudinal (cross-fibre) direction under both uniaxial and equi-load biaxial loading. The equi-load biaxial tensile tests revealed that contraction could occur in the transverse direction despite increasing load, probably due to the anisotropy of the tissue. Optical surface marker tracking and digital image correlation methods were found to greatly improve the accuracy of stretch measurement, resulting in a 75% change in the apparent stiffness compared to using strain derived from machine cross-head displacement. Additionally, a finite element model of the experiments using a combination of an Ogden and fibre exponential power law model for the linea alba was implemented to quantify the effect of clamping and tissue dimensions (which are suboptimal for tensile testing) on the results. The preliminary model results were used to apply a correction factor to the uniaxial experimental data prior to inverse optimisation to derive best fit material parameters for the fibre reinforced Ogden model. Application of the model to the equi-load biaxial case showed some differences compared to the experimental data, suggesting a more complex anisotropic model may be necessary to capture biaxial behaviour. These

  17. Wall Mechanical Properties and Hemodynamics of Unruptured Intracranial Aneurysms

    PubMed Central

    Cebral, Juan R.; Duan, Xinjie; Chung, Bong Jae; Putman, Christopher; Aziz, Khaled; Robertson, Anne

    2016-01-01

    Purpose To investigate the relationship between the intra-aneurysmal hemodynamic conditions and the mechanical properties of the wall in human aneurysms. Methods A total of eight unruptured aneurysms were analyzed. Computational fluid dynamics (CFD) models were constructed from pre-operative 3D rotational angiography images. The aneurysms were clipped and the domes were resected and mechanically tested to failure with a uniaxial testing system under multi-photon microscopy. Linear regression analysis was performed to explore possible correlations between hemodynamic quantities and the failure characteristics and stiffness of the wall. Results The ultimate strain was negatively correlated to aneurysm inflow rate (p=0.021), mean velocity (p=0.025), and mean wall shear stress (p=0.039). It was also negatively correlated to inflow concentration, oscillatory shear index and measures of the complexity and instability of the flow; however these trends did not reach statistical significance. The wall stiffness at high strains was positively correlated to inflow rate (p=0.014), mean velocity (p=0.008), inflow concentration (p=0.04), flow instability (p=0.006), flow complexity (p=0.019), wall shear stress (p=0.002) and oscillatory shear index (p=0.004). Conclusions In a study of 8 unruptured intracranial aneurysms, ultimate strain is negatively correlated with aneurysm inflow rate, mean velocity and mean wall shear stress. Wall stiffness is positively correlated with aneurysm inflow rate, mean velocity, wall shear stress, flow complexity and stability, and oscillatory shear index. These trends and the impact of hemodynamics on wall structure and mechanical properties should be further investigated in larger studies. PMID:26228891

  18. A few nascent methods for measuring mechanical properties of the biological cell.

    SciTech Connect

    Thayer, Gayle Echo; de Boer, Maarten Pieter; Corvalan, Carlos; Corwin, Alex David; Campanella, Osvaldo H. (Purdue University, West Lafayette, IN); Nivens, David (Purdue University, West Lafayette, IN); Werely, Steven (Purdue University, West Lafayette, IN); Sumali, Anton Hartono; Koch, Steven John

    2006-01-01

    substrate actually modified the mechanical properties of the cell membrane. Thus, the use of the method for measuring the mechanical properties of the cell may not be completely appropriate without significant modifications. The latest of the studies discussed in this report is intended to overcome the drawback of the AFM as a means of measuring mechanical and rheological properties. The squeezing-flow AFM technique utilizes two parallel plates, one stationary and the other attached to an AFM probe. Instead of using static force-displacement curves, the technique takes advantage of frequency response functions from force to velocity. The technique appears to be quite promising for obtaining dynamic properties. More research is required to develop this technique.

  19. Mechanical properties of materials at micro/nano scales

    NASA Astrophysics Data System (ADS)

    Xu, Wei-Hua

    Mechanical properties of materials in small dimensions, including the depth-dependent hardness at the nano/micrometer scales, and the mechanical characterization of thin films and nanotubes, are reported. The surface effect on the depth-dependent nano/microhardness was studied and an apparent surface stress was introduced to represent the energy dissipated per unit area of a solid surface. A plastic bearing ratio model was proposed for the nanoindentation of rough surfaces. The energy dissipation occurring at the indented surface is among the factors that cause the Indentation Size Effect (ISE) at the micro/nanometer scales. Furthermore, an elastic-plastic bearing ratio model was developed for nanoindentation of rough surfaces with a flat indenter tip. The theoretical predictions agree with the experimental results and finite element simulations, from which the elastic constant and the surface hardness were extracted. The surface hardness exhibits an inverse ISE due to the interaction of asperities. The nanoindentation tests on Highly Oriented Pyrolytic Graphite (HOPG) may lead to the formation of carbon tubes, which are rolled up by the delaminated graphite layers. The nanoindentation loading-unloading curves reveal single pop-in and multiple pop-in phenomena, which is induced by fracture of the graphite layers and/or by delamination between the layers. From the load at pop-in, the fracture strength of the layers and/or the bonding strength between the layers can be estimated by the elastic field model for Hertzian contact including sliding friction for transverse isotropy. Two novel methods were developed to estimate the mechanical properties of films, including the Raman spectra method for the estimation of residual stresses in thin ferroelectric films and the microbridge testing method for the mechanical characterization of trilayer thin films. Mechanical characterization was also carried out on Tobacco Mosaic Virus (TMV) nanotubes with each being comprised of

  20. Exploring chromatin organization mechanisms through its dynamic properties.

    PubMed

    Bronshtein, Irena; Kanter, Itamar; Kepten, Eldad; Lindner, Moshe; Berezin, Shirly; Shav-Tal, Yaron; Garini, Yuval

    2016-03-01

    The organization of the genome in the nucleus is believed to be crucial for different cellular functions. It is known that chromosomes fold into distinct territories, but little is known about the mechanisms that maintain these territories. To explore these mechanisms, we used various live-cell imaging methods, including single particle tracking to characterize the diffusion properties of different genomic regions in live cells. Chromatin diffusion is found to be slow and anomalous; in vast contrast, depletion of lamin A protein significantly increases chromatin motion, and the diffusion pattern of chromatin transforms from slow anomalous to fast normal. More than this, depletion of lamin A protein also affects the dynamics of nuclear bodies. Our findings indicate that chromatin motion is mediated by lamin A and we suggest that constrained chromatin mobility allows to maintain chromosome territories. Thus, the discovery of this function of nucleoplasmic lamin A proteins sheds light on the maintenance mechanism of chromosome territories in the interphase nucleus, which ensures the proper function of the genome. PMID:26854963