Science.gov

Sample records for adverse handling characteristics

  1. Measurement of the handling characteristics of two light airplanes

    NASA Technical Reports Server (NTRS)

    1980-01-01

    A flight investigation of the handling characteristics of two single engine general aviation airplanes, one a high wing and the other a low wing, included a variety of measurements of different characteristics of the airplanes. The characteristics included those of the control systems, performance, longitudinal and lateral responses, and stall motions.

  2. Characteristics of the handling and positioning aid

    NASA Technical Reports Server (NTRS)

    Goodwin, C. J.

    1982-01-01

    The handling and positioning aid which (HPA) provides a wide range of adjustable work stations both inboard and outboard of the cargo bay is discussed. It can assist with berthing and docking, it is robust, stiff, has a simple control system, and is modular. An articulated arm version of HPA employed in a typical servicing mission is shown. Mounted on a base frame that spans the Orbiter cargo bay, the 6 m arm is long enough to hold the satellite being serviced and keep its solar array clear of the Orbiter radiators. By adjusting the length and angle of the support platform mast, and rotating the tip of the HPA arm, almost every item on the satellite can be reached. Spares and change-out units can be brought to and from the work site by the RMS, which is controlled from the aft flight deck. The fore and aft position of the base frame can be changed between Orbiter flights and this, together with the 5 degrees of freedom (DOF) of the long arm, allows work sites to be chosen that meet the clearance, reach and vision requirements of many missions. Flight article activities are shown are shown above the dashed horizontal line and Development Test Article (DTA) work below. Flight article requirements and concepts and the design of the DTA are developed.

  3. Unified Theory for Aircraft Handling Qualities and Adverse Aircraft-Pilot Coupling

    NASA Technical Reports Server (NTRS)

    Hess, R. A.

    1997-01-01

    A unified theory for aircraft handling qualities and adverse aircraft-pilot coupling or pilot-induced oscillations is introduced. The theory is based on a structural model of the human pilot. A methodology is presented for the prediction of (1) handling qualities levels; (2) pilot-induced oscillation rating levels; and (3) a frequency range in which pilot-induced oscillations are likely to occur. Although the dynamics of the force-feel system of the cockpit inceptor is included, the methodology will not account for effects attributable to control sensitivity and is limited to single-axis tasks and, at present, to linear vehicle models. The theory is derived from the feedback topology of the structural model and an examination of flight test results for 32 aircraft configurations simulated by the U.S. Air Force/CALSPAN NT-33A and Total In-Flight Simulator variable stability aircraft. An extension to nonlinear vehicle dynamics such as that encountered with actuator saturation is discussed.

  4. Contribution of patient and hospital characteristics to adverse patient incidents.

    PubMed Central

    Elnicki, R A; Schmitt, J P

    1980-01-01

    The 1974 medical malpractice "crisis" brought about extensive legislation and insurance regulation in the United States. Hospitals in many states are now required to support risk management programs that include investigation and systematic analyses of adverse patient incidents. However, no research supports the hypothesis that systematic analysis of adverse patient incidents can identify contributory factors. In this study, a simple prediction model was used to estimate relationships between adverse incidents and selected patient and environmental characteristics in a large hospital. While some of the incident-characteristic relationships were significant, none of the estimated equations yielded results that could be logically translated into policy recommendations for the hospital. These results point to the need for further research. The benefits that positive research results would have for patients, hospitals, an the bill-paying public are obvious. Additional negative results would suggest that many legislative bodies and regulatory agencies were presumptions in requiring hospitals to conduct analyses of incidents. PMID:7461973

  5. Gelatine sponge particles: handling characteristics for endovascular use.

    PubMed

    Abada, Hicham T; Golzarian, Jafar

    2007-12-01

    Gelatin sponge particles have been used since the mid 1960's in interventional radiology. It had played an important role as a temporary occlusive agent in the past. Embolization has gained a widespread acceptance in interventional radiology leading to different innovative new agents. This review is aimed to underline the persistent role of Gelfoam along with a better understanding of handling techniques in light of what we have learned from other particles as PVA and Embospheres. The clinical impact of embolization with gelfoam will be also stressed and discussed.

  6. Study of ground handling characteristics of a maritime patrol airship

    NASA Technical Reports Server (NTRS)

    1981-01-01

    Mooring concepts appropriate for maritime patrol airship (MPA) vehicles are investigated. The evolution of ground handling systems and procedures for all airship types is reviewed to ensure that appropriate consideration is given to past experiences. A tri-rotor maritime patrol airship is identified and described. Wind loads on a moored airship and the effects of these loads on vehicle design are analyzed. Several mooring concepts are assessed with respect to the airship design, wind loads, and mooring site considerations. Basing requirements and applicability of expeditionary mooring also are addressed.

  7. 78 FR 15112 - Rulemaking Advisory Committee; Transport Airplane Performance and Handling Characteristics-New Task

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-08

    ... guidance material for airplane performance and handling characteristics in new transport category airplanes... associated guidance material for airworthiness certification of airplane designs. Recommendations may result... Federal Aviation Administration Aviation Rulemaking Advisory Committee; Transport Airplane Performance...

  8. Quantitative physical and handling characteristics of novel antibacterial braided silk suture materials.

    PubMed

    Chen, Xiaojie; Hou, Dandan; Tang, Xiaoqi; Wang, Lu

    2015-10-01

    Surgical braided silk sutures have been widely used because these materials exhibit good handling characteristics, ease of use, and ideal knot security. However, surgical silk sutures likely cause surgical site infections because these sutures are composed of natural protein materials with a braided structure. As such, antibacterial silk sutures for clinical wound closure should be developed. Braided silk suture could be treated and modified with antibacterial agent, provided that excellent physical and handling characteristics of this material should maximize maintained. This study aimed to quantitatively investigate the effect of antibacterial treatment with different parameters on physical and handling characteristics of novel antibacterial braided silk sutures. Physical and handling characteristics, including appearance, knot-pull tensile strength, pullout friction resistance, tissue drag friction resistance, and bending stiffness, were evaluated. After physical and handling tests were conducted, images showed morphological characteristics were obtained and evaluated to investigate the relationship between antibacterial treatment and physical and handling properties. Results showed that suture diameter increased and reached the nearest thick size specification; knot-pull tensile strength decreased but remained higher than the standard value by at least 40.73%. Fracture asynchronism during knot-pull tensile strength test suggested that the fineness ratio of shell and core strands may enhance knot-pull tensile strength. Static and dynamic frictions of suture-to-suture friction behavior were slightly affected by antibacterial treatment, and changed to less than 16.07% and 32.77%, respectively. Suture-to-tissue friction and bending stiffness increased by approximately 50%; the bending stiffness of the proposed suture remained efficient compared with that of synthetic sutures. Therefore, good physical and handling characteristics can be maintained by selecting

  9. Improved flow characteristics of bauxite by treatment with a bauxite handling aid

    SciTech Connect

    Cardounel, C.; O`Brien, K.

    1996-10-01

    Sherwin Plant bauxite handling facilities are capable of processing relatively free flowing dry bauxites. The processing of wet bauxite through these facilities was challenging and required the use of backhoes and bulldozers. The use of a bauxite handling aid to enhance flow properties of wet bauxite was investigated in the laboratory and subsequently tested in the plant. A significant improvement in flow characteristics was achieved. The bauxite became free flowing, eliminating the need for backhoes and bulldozers to reclaim the bauxite. This paper relates how laboratory testing led to successful plant application of the bauxite handling aid.

  10. In Flight Evaluation of Active Inceptor Force-Feel Characteristics and Handling Qualities

    NASA Technical Reports Server (NTRS)

    Lusardi, Jeff A.; Blanken, Chris L.; Ott, Carl Raymond; Malpica, Carlos A.; von Gruenhagen, Wolfgang

    2012-01-01

    The effect of inceptor feel-system characteristics on piloted handling qualities has been a research topic of interest for many years. Most of the research efforts have focused on advanced fly-by-wire fixed-wing aircraft with only a few studies investigating the effects on rotorcraft. Consequently, only limited guidance is available on how cyclic force-feel characteristics should be set to obtain optimal handling qualities for rotorcraft. To study this effect, the U.S. Army Aeroflightdynamics Directorate working with the DLR Institute of Flight Systems in Germany under Task X of the U.S. German Memorandum of Understanding have been conducting flight test evaluations. In the U.S., five experimental test pilots have completed evaluations of two Mission Task Elements (MTEs) from ADS-33E-PRF and two command/response types for a matrix of center-stick cyclic force-feel characteristics at Moffett Field. In Germany, three experimental test Pilots have conducted initial evaluations of the two MTEs with two command/response types for a parallel matrix of side-stick cyclic force-feel characteristics at WTD-61 in Manching. The resulting data set is used to correlate the effect of changes in natural frequency and damping ratio of the cyclic inceptor on the piloted handling qualities. Existing criteria in ADS-33E and a proposed Handling Qualities Sensitivity Function that includes the effects of the cyclic force-feel characteristics are also evaluated against the data set and discussed.

  11. Flight testing and frequency domain analysis for rotorcraft handling qualities characteristics

    NASA Technical Reports Server (NTRS)

    Ham, Johnnie A.; Gardner, Charles K.; Tischler, Mark B.

    1993-01-01

    A demonstration of frequency domain flight testing techniques and analyses was performed on a U.S. Army OH-58D helicopter in support of the OH-58D Airworthiness and Flight Characteristics Evaluation and the Army's development and ongoing review of Aeronautical Design Standard 33C, Handling Qualities Requirements for Military Rotorcraft. Hover and forward flight (60 knots) tests were conducted in 1 flight hour by Army experimental test pilots. Further processing of the hover data generated a complete database of velocity, angular rate, and acceleration frequency responses to control inputs. A joint effort was then undertaken by the Airworthiness Qualification Test Directorate (AQTD) and the U.S. Army Aeroflightdynamics Directorate (AFDD) to derive handling qualities information from the frequency response database. A significant amount of information could be extracted from the frequency domain database using a variety of approaches. This report documents numerous results that have been obtained from the simple frequency domain tests; in many areas, these results provide more insight into the aircraft dynamics that affect handling qualities than to traditional flight tests. The handling qualities results include ADS-33C bandwidth and phase delay calculations, vibration spectral determinations, transfer function models to examine single axis results, and a six degree of freedom fully coupled state space model. The ability of this model to accurately predict aircraft responses was verified using data from pulse inputs. This report also documents the frequency-sweep flight test technique and data analysis used to support the tests.

  12. Effects of simulator motion and visual characteristics on rotorcraft handling qualities evaluations

    NASA Technical Reports Server (NTRS)

    Mitchell, David G.; Hart, Daniel C.

    1993-01-01

    The pilot's perceptions of aircraft handling qualities are influenced by a combination of the aircraft dynamics, the task, and the environment under which the evaluation is performed. When the evaluation is performed in a groundbased simulator, the characteristics of the simulation facility also come into play. Two studies were conducted on NASA Ames Research Center's Vertical Motion Simulator to determine the effects of simulator characteristics on perceived handling qualities. Most evaluations were conducted with a baseline set of rotorcraft dynamics, using a simple transfer-function model of an uncoupled helicopter, under different conditions of visual time delays and motion command washout filters. Differences in pilot opinion were found as the visual and motion parameters were changed, reflecting a change in the pilots' perceptions of handling qualities, rather than changes in the aircraft model itself. The results indicate a need for tailoring the motion washout dynamics to suit the task. Visual-delay data are inconclusive but suggest that it may be better to allow some time delay in the visual path to minimize the mismatch between visual and motion, rather than eliminate the visual delay entirely through lead compensation.

  13. Physical Performance Characteristics of Assisted Living Residents and Risk for Adverse Health Outcomes

    ERIC Educational Resources Information Center

    Giuliani, Carol A.; Gruber-Baldini, Ann L.; Park, Nan S.; Schrodt, Lori A.; Rokoske, Franzi; Sloane, Philip D.; Zimmerman, Sheryl

    2008-01-01

    Purpose: Researchers know little about the physical performance ability of residential care/assisted living (RC/AL) residents and its relationship to adverse outcomes such as fracture, nursing home placement, functional decline, and death. The purposes of this article are to (a) describe the functional characteristics of RC/AL residents, (b)…

  14. High intake of dietary tyramine does not deteriorate glucose handling and does not cause adverse cardiovascular effects in mice.

    PubMed

    Carpéné, Christian; Schaak, Stéphane; Guilbeau-Frugier, Céline; Mercader, Josep; Mialet-Perez, Jeanne

    2016-09-01

    Tyramine is naturally occurring in food and induces pressor responses. Low-tyramine diets are recommended for patients treated with MAO inhibitors to avoid the fatal hypertensive crisis sadly known as "cheese effect". Hence, tyramine intake is suspected to have toxicological consequences in humans, while its administration to type 1 diabetic rodents has been reported to improve glucose tolerance. We investigated in mice whether prolonged tyramine ingestion could alter glucose homeostasis, insulin sensitivity, adipose tissue physiology or cardiovascular functions. Tyramine was added at 0.04 or 0.14 % in the drinking water since this was estimated to increase by 10- to 40-fold the spontaneous tyramine intake of control mice fed a standard diet. Ten to 12 weeks of such tyramine supplementation did not influence body weight gain, adiposity or food consumption. Both doses (reaching approx. 300 and 1100 μmol tyramine/kg bw/day) decreased nonfasting blood glucose but did not modify glucose tolerance or fasting levels of glucose, insulin or circulating lipids. Blood pressure was not increased in tyramine-drinking mice, while only the higher tested dose moderately increased heart rate without change in its variability. Markers of cardiac tissue injury or oxidative stress remained unaltered, except an increased hydrogen peroxide production in heart preparations. In isolated adipocytes, tyramine inhibited lipolysis similarly in treated and control groups, as did insulin. The lack of serious adverse cardiovascular effects of prolonged tyramine supplementation in normoglycemic mice together with the somewhat insulin-like effects found on adipose cells should lead to reconsider favourably the risk/benefit ratio of the intake of this dietary amine.

  15. Multidisciplinary Treatments, Patient Characteristics, Context of Care, and Adverse Incidents in Older, Hospitalized Adults

    PubMed Central

    Shever, Leah L.; Titler, Marita G.

    2012-01-01

    The purpose of this study was to examine factors that contribute to adverse incidents by creating a model that included patient characteristics, clinical conditions, nursing unit context of care variables, medical treatments, pharmaceutical treatments, and nursing treatments. Data were abstracted from electronic, administrative, and clinical data repositories. The sample included older adults hospitalized during a four-year period at one, academic medical facility in the Midwestern United States who were at risk for falling. Relational databases were built and a multistep, statistical model building analytic process was used. Total registered nurse (RN) hours per patient day (HPPD) and HPPDs dropping below the nursing unit average were significant explanatory variables for experiencing an adverse incident. The number of medical and pharmaceutical treatments that a patient received during hospitalization as well as many specific nursing treatments (e.g., restraint use, neurological monitoring) were also contributors to experiencing an adverse incident. PMID:22530112

  16. PFP Commercial Grade Food Pack Cans for Plutonium Handling and Storage Critical Characteristics

    SciTech Connect

    BONADIE, E.P.

    2000-08-22

    This screening addresses the critical characteristics for food industry type cans and containers used for handling and storage of special nuclear materials at the Plutonium Finishing Plant (PFP). HNF-5460, Revision 0 specified a minimum tin plate of 0.50 Ib./base box. Since the food pack cans currently used and that have been tested have a listed tin plate of 0.20 lbs. per base box, Revision 1 reduced the tin plate to {ge} 0.20 Ib./base box (i.e., No. 20 tinned commercial steel or heavier). This revision lists Critical Characteristics for two (2) large filtered containers, and associated shielding over-packs. These new containers are called ''Nuclear Material Containers'' (NMCs). They are supplied in various sizes, which can be nested, one inside another. The PFP will use NMCs with volumes up to 8-quarts as needed to over-pack largely bulged containers.

  17. Analysis of Handling Qualities Design Criteria for Active Inceptor Force-Feel Characteristics

    NASA Technical Reports Server (NTRS)

    Malpica, Carlos A.; Lusardi, Jeff A.

    2013-01-01

    The force-feel system characteristics of the cyclic inceptors of most helicopters are set based on the characteristics of the mechanical components in the control system (mass, springs, friction dampers, etc.). For these helicopters, the force-feel characteristics typically remain constant over the entire flight envelope, with perhaps a trim release to minimize control forces while maneuvering. With the advent of fly-by-wire control systems and active inceptors in helicopters, the force-feel characteristics are now determined by the closed-loop response of the active inceptor itself as defined by the inertia, force/displacement gradient, damping, breakout force and detent shape configuration parameters in the inceptor control laws. These systems give the flexibility to dynamically prescribe different feel characteristics for different control modes or flight conditions, and the ability to provide tactile cueing to the pilot through the actively controlled side-stick or center-stick cyclic inceptor. For rotorcraft, a few studies have been conducted to assess the effects of cyclic force-feel characteristics on handling qualities in flight. An early study provided valuable insight into the static force-deflection characteristics (force gradient) and the number of axes controlled by the side-stick controller for the U.S. Army's Advanced Digital/Optical Control System (ADOCS) demonstrator aircraft [1]. The first of a series of studies providing insight on the inceptor dynamic force-feel characteristics was conducted on the NASA/Army CH-47B variable-stability helicopter [2]. This work led to a proposed requirement that set boundaries based on the cyclic natural frequency and inertia, with the stipulation of a lower damping ratio limit of 0.3 [3]. A second study was conducted by the Canadian Institute for Aerospace Research using their variable-stability Bell 205A helicopter [4]. This research suggested boundaries for stick dynamics based on natural frequency and damping

  18. Uncertainties of stormwater characteristics and removal rates of stormwater treatment facilities: implications for stormwater handling.

    PubMed

    Langeveld, J G; Liefting, H J; Boogaard, F C

    2012-12-15

    Stormwater runoff is a major contributor to the pollution of receiving waters. This study focuses at characterising stormwater in order to be able to determine the impact of stormwater on receiving waters and to be able to select the most appropriate stormwater handling strategy. The stormwater characterisation is based on determining site mean concentrations (SMCs) and their uncertainties as well as the treatability of stormwater by monitoring specific pollutants concentration levels (TSS, COD, BOD, TKN, TP, Pb, Cu, Zn, E.coli) at three full scale stormwater treatment facilities in Arnhem, the Netherlands. This has resulted in 106 storm events being monitored at the lamella settler, 59 at the high rate sand filter and 132 at the soil filter during the 2 year monitoring period. The stormwater characteristics in Arnhem in terms of SMCs for main pollutants TSS and COD and settling velocities differ from international data. This implies that decisions for stormwater handling made on international literature data will very likely be wrong due to assuming too high concentrations of pollutants and misjudgement of the treatability of stormwater. The removal rates monitored at the full scale treatment facilities are within the expected range, with the soil filter and the sand filter having higher removal rates than the lamella settler. The full scale pilots revealed the importance of incorporating gross solids removal in the design of stormwater treatment facilities, as the gross solids determine operation and maintenance requirements.

  19. Rheological properties of polyvinylsiloxane impression materials before mixing and during setting related to handling characteristics

    NASA Astrophysics Data System (ADS)

    Lee, Hyang-Ok; Lee, In-Bog

    2012-09-01

    The purpose of this study is to determine and compare the handling and rheological properties of polyvinylsiloxane impression pastes before mixing and during setting, and to investigate the effect of its constituents on the properties of the materials. Five polyvinylsiloxane impression materials (Examixfine, Extrude, Honigum, Imprint II, and Express) were used. A flow test and a drip test were performed to determine the handling characteristics. The rheological properties of each impression material prior to mixing (shear stress, viscosity) and during setting (storage modulus G'), loss modulus G″), loss tangent tanδ) were measured with a stress-controlled rheometer at 25°C and 32°C, respectively. Inorganic filler content of each impression material was measured and observed with a SEM. The molecular weight distribution of polymer matrix was determined with a gel permeation chromatography (GPC). Express and Honigum display lower flow compared to the other materials, due to their high yield-stress values. Examixfine exhibits the greatest flow. All materials display pseudoplastic behavior, excluding the Examixfine catalyst. The viscosities at low shear rate are greatest for Express and Honigum; however, under high shear conditions, the viscosities of Extrude and Honigum are the lowest. Following mixing, each material show an increase in G', finally reaching a plateau, and the tanδ rapidly decreases with time. Imprint II shows the highest final G' as well as the most rapid decrease in tanδ. Express and Imprint II present the highest filler content and rough filler surface, while Honigum shows the lowest filler content and small filler particles. Most products are composed of polymers over 30 kDa and oligomers less than 1 kDa. Each impression material possesses different rheological properties, which significantly affect the handling characteristics. The yield stress of the impression material minimizes unnecessary flow prior to and after seating. Viscoelastic

  20. Dangerous Waste Characteristics of Contact-Handled Transuranic Mixed Wastes from the Hanford Tanks

    SciTech Connect

    Tingey, Joel M.; Bryan, Garry H.; Deschane, Jaquetta R.

    2004-08-31

    This report summarizes existing analytical data from samples taken from the Hanford tanks designated as potentially containing transuranic mixed process wastes. Process knowledge of the wastes transferred to these tanks has been reviewed to determine whether the dangerous waste characteristics now assigned to all Hanford underground storage tanks are applicable to these particular wastes. Supplemental technologies are being examined to accelerate the Hanford tank waste cleanup mission and accomplish waste treatment safely and efficiently. To date, 11 Hanford waste tanks have been designated as potentially containing contact-handled (CH) transuranic mixed (TRUM) wastes. The CH-TRUM wastes are found in single-shell tanks B-201 through B-204, T-201 through T-204, T-104, T-110, and T-111. Methods and equipment to solidify and package the CH-TRUM wastes are part of the supplemental technologies being evaluated. The resulting packages and wastes must be acceptable for disposal at the Waste Isolation Pilot Plant (WIPP). The dangerous waste characteristics being considered include ignitability, corrosivity, reactivity, and toxicity arising from the presence of 2,4,5-trichlorophenol at levels above the dangerous waste threshold. The analytical data reviewed include concentrations of sulfur, sulfate, cyanide, 2,4,5-trichlorophenol, total organic carbon, and oxalate; the composition of the tank headspace, pH, and mercury. Differential scanning calorimetry results were used to determine the energetics of the wastes as a function of temperature.

  1. Traumatic and Adverse Attachment Childhood Experiences are not Characteristic of OCD but of Depression in Adolescents.

    PubMed

    Ivarsson, Tord; Saavedra, Fanny; Granqvist, Pehr; Broberg, Anders G

    2016-04-01

    We investigated whether adverse attachment experience might contribute to the development of obsessive-compulsive disorder (OCD). We interviewed 100 adolescents, 25 each with primary OCD, depressive disorder (DD), OCD plus DD and general population controls (CTRs) using the adult attachment interview to assess attachment experiences (AEs), including traumatic and adverse AE (TAE). Adolescents with OCD, OCD+DD and DD had little evidence of secure base/safe haven parental behaviour and their childhood attachment needs judged to be rejected as compared to the controls. Overprotection was not characteristic of OCD, and parents using the child for their own needs (elevated levels of involving/role reversal) occurred only in DD, with low levels in OCD, OCD+DD and CTR. Traumatic experiences, often multiple, and/or attachment related were reported significantly more often in the DD group, and was less common in OCD+DD, CTR and particularly in the OCD group. In OCD, little TAE was reported and adverse AE were less serious and seem unlikely to contribute directly to OCD aetiology. In DD and to some degree in OCD+DD serious AE/TAE may have some etiological significance for the depressive states.

  2. Effects of cockpit lateral stick characteristics on handling qualities and pilot dynamics

    NASA Technical Reports Server (NTRS)

    Mitchell, David G.; Aponso, Bimal L.; Klyde, David H.

    1992-01-01

    This report presents the results of analysis of cockpit lateral control feel-system studies. Variations in feel-system natural frequency, damping, and command sensing reference (force and position) were investigated, in combination with variations in the aircraft response characteristics. The primary data for the report were obtained from a flight investigation conducted with a variable-stability airplane, with additional information taken from other flight experiments and ground-based simulations for both airplanes and helicopters . The study consisted of analysis of handling qualities ratings and extraction of open-loop, pilot-vehicle describing functions from sum-of-sines tracking data, including, for a limited subset of these data, the development of pilot models. The study confirms the findings of other investigators that the effects on pilot opinion of cockpit feel-system dynamics are not equivalent to a comparable level of added time delay, and until a more comprehensive set of criteria are developed, it is recommended that feel-system dynamics be considered a delay-inducing element in the aircraft response. The best correlation with time-delay requirements was found when the feel-system dynamics were included in the delay measurements, regardless of the command reference. This is a radical departure from past approaches.

  3. Influence on grip of knife handle surface characteristics and wearing protective gloves.

    PubMed

    Claudon, Laurent

    2006-11-01

    Ten subjects were asked to apply maximum torques on knife handles with either their bare hand or their hand wearing a Kevlar fibre protective glove. Four knife handles (2 roughnesses, 2 hardnesses) were tested. Surface electromyograms of 6 upper limb and shoulder muscles were recorded and subject opinions on both knife handle hardness and friction in the hand were also assessed. The results revealed the significant influence of wearing gloves (p<0.0001), knife type (p<0.0005) and handle hardness (p<0.005) on the applied torque. Wearing Kevlar fibre gloves greatly increased the torque independently of the other two parameters. Under the bare hand condition, a 90 degrees ShA slightly rough handle provided the greatest torque. Subject opinion agreed with the observed effects on recorded torque values except for the hardness factor, for which a preference for the 70 degrees ShA value over the 90 degrees ShA value emerged.

  4. The Camino intracranial pressure device in clinical practice: reliability, handling characteristics and complications.

    PubMed

    Münch, E; Weigel, R; Schmiedek, P; Schürer, L

    1998-01-01

    Intracranial pressure monitoring has a key role in the management of patients developing increased intracranial pressure (ICP). We adopted the Camino fiberoptic system for intracranial pressure measurement in 1993 in our neurosurgical department. The aim of this study was to investigate reliability, handling characteristics and complication rate of the Camino intracranial pressure device. In an eighteen month period, we prospectively investigated 118 patients with intracranial pathology undergoing Camino fiberoptic intraparenchymal or intraventricular ICP monitoring. The assessment of reliability of ICP monitoring according to patients clinical condition, to cranial computed tomography (CCT) findings and ICP waveform was carried out. Position of the probe and intracranial bleeding complications related to probe insertion were confirmed by CCT. Technical complications, as well as infections due to the device, were documented. In vivo recalibration was performed in 22 patients. At the end of the measuring period the drift of the probe was evaluated and the accuracy of the fiberoptic device was measured by performing a two point calibration. Recordings of intracranial pressure were carried out with 136 Camino devices (104 parenchymal, 32 ventricular) in 118 patients with an average measuring time of 94.1 +/- 79.1 hrs. One hundred and fifteen Camino intracranial pressure devices (85.2%) demonstrated reliability according to the predetermined clinical parameters. The actual mean drift after removal of the devices was 3.4 mmHg +/- 3.2 with an actual daily drift of 3.2 +/- 17.2 mmHg. Recorded complications included infection (0.7%), intraparenchymal haematoma (5.1%), and a high complication rate (23.5%) with regard to technical aspects. The Camino intracranial pressure system offers reliable ICP measurements in an acceptable percentage of devices, and the advantage of in vivo recalibration. The high incidence of technical complications identifies a need for improvement in

  5. Patterns of childhood adverse events are associated with clinical characteristics of bipolar disorder

    PubMed Central

    2013-01-01

    Background Previous studies in bipolar disorder investigating childhood trauma and clinical presentations of the illness have mainly focused on physical and sexual abuse. Our aim was to explore further the relationship between childhood trauma and disease characteristics in bipolar disorder to determine which clinical characteristics were most strongly associated with childhood trauma total score, as well as subtypes of adverse childhood events, including physical, sexual, emotional abuse and neglect. Methods 141 Patients with bipolar disorder were consecutively recruited, and disease history and clinical characteristics were assessed. History of childhood abuse was obtained using the Childhood Trauma Questionnaire (CTQ). Statistical methods used were factor analysis, Poisson and linear regression, and generalized additive modeling (GAM). Results The factor analysis of CTQ identified three factors: emotional abuse/neglect, sexual abuse and physical abuse. There were significant associations between CTQ total score and earlier onset of illness, reduced level of psychosocial functioning (GAF; Global Assessment of Functioning) and decreased number of hospitalization, which mainly were due to the factor emotional abuse/neglect. Physical abuse was significantly associated with lower GAF scores, and increased number of mood episodes, as well as self-harm. Sexual abuse was significantly associated with increased number of mood episodes. For mood episodes and self-harm the associations were characterized by great variance and fluctuations. Conclusions Our results suggest that childhood trauma is associated with a more severe course of bipolar illness. Further, childhood abuse (physical and sexual), as well as emotional abuse and neglect were significantly associated with accelerating staging process of bipolar disorder. By using specific trauma factors (physical abuse, sexual abuse and emotional abuse/neglect) the associations become both more precise, and diverse. PMID

  6. Patient Characteristics Associated with Adverse Drug Events in Hospital: An Overview of Reviews

    PubMed Central

    Mihajlovic, Silvija; Gauthier, Jeremie; MacDonald, Erika

    2016-01-01

    Background: Adverse drug events (ADEs) occurring in hospital inpatients can have serious implications. The ability to identify and prioritize patients at higher risk of ADEs could help pharmacists to optimize their impact as members of the patient care team. Objective: To identify risk factors, patient characteristics, and medications associated with a higher likelihood of ADEs in adult inpatients through an overview of reviews on this topic. Data Sources: Systematic reviews and narrative reviews or guidelines identified through a search of MEDLINE and the Cochrane Database of Systematic Reviews (limited to articles published from 1995 to June 4, 2015), as well as a grey literature search. Study Selection and Data Extraction: For inclusion in this overview, a review had to discuss patient characteristics or risk factors associated with ADEs, medications associated with ADEs, or drug–drug interactions associated with ADEs, in adult inpatients. Articles retrieved by the literature search were screened for eligibility by a single reviewer. Data Synthesis: Eleven articles were deemed eligible for inclusion in this overview: 4 systematic reviews and 7 narrative reviews or guidelines. Their results were described narratively. Older age and polypharmacy were the most frequently cited risk factors associated with ADEs in hospital inpatients. Renal impairment, female sex, and decline in cognition were also frequently reported as being associated with ADEs. Medication classes reported to be associated with ADEs during the hospital stay included anticoagulants, anti-infectives/antibiotics, antidiabetic agents, analgesics (including opioids and nonsteroidal anti-inflammatory drugs), and cardiovascular drugs (including antihypertensive agents, diuretics, and digoxin). Two publications reported on preventable ADEs in hospital inpatients; the medications associated with preventable ADEs were consistent with those reported above. Conclusions: The risk factors, patient

  7. Analysis of Handling Qualities Design Criteria for Active Inceptor Force-Feel Characteristics

    DTIC Science & Technology

    2013-01-01

    a classical regulatory compensatory task. Sub-components for the structural pilot include neuromuscular dynamics ( ), proprioceptive and vestibular...feedback ( and ̇ respectively), and the visual error compensation ( ). Proprioceptive feedback fundamentally accounts for the ability of...inside of the proprioceptive feedback loop. This allows for the modeling approach to be of use in predicting the handling qualities impact of the

  8. Prevalence and characteristics of adverse drug reactions at admission to hospital: a prospective observational study

    PubMed Central

    Chan, Sze Ling; Ang, Xiaohui; Sani, Levana L.; Ng, Hong Yen; Winther, Michael D.; Liu, Jian Jun; Brunham, Liam R.

    2016-01-01

    Aims Adverse drug reactions (ADRs) contribute to poorer patient outcomes and additional burden to the healthcare system. However, data on the true burden, relevant types and drugs causing ADRs are lacking. The aim of this study was to determine the prevalence of ADR‐related hospitalization in the general adult population in Singapore and to investigate their characteristics. Methods We prospectively recruited 1000 adult patients with unplanned admission to a large tertiary‐care hospital. Two independent reviewers evaluated all suspected ADRs for causality, type, severity and avoidability. The prevalence of ADR‐related hospitalization was calculated based on ‘definite’ and ‘probable’ ADRs. Logistic regression was used to evaluate predictors for having an ADR at admission. Results The prevalence of all ADRs at admission was 12.4% (95% CI: 10.5–14.6%) and ADRs causing admission was 8.1% (95% CI: 6.5–10.0%). The most common ADRs were gastrointestinal‐related. The most common drug category causing ADRs were cardiovascular drugs. Patients with ADRs had a longer length of stay than those who did not (median 4 vs. 3 days, P = 1.70 × 10−3). About 30% of ADRs at admission were caused by at least one drug with a clinical annotation in the Pharmacogenomics KnowledgeBase (PharmGKB), suggesting that some of these ADRs may have been predicted by pharmacogenetic testing. Conclusions We have quantified the burden and characteristics of clinically impactful ADRs in the Singaporean general adult population. Our results will provide vital information for efforts in reducing ADRs through targeted vigilance, patient education and pharmacogenomics in Singapore. PMID:27640819

  9. Characteristic values of the lumbar load of manual patient handling for the application in workers' compensation procedures

    PubMed Central

    2011-01-01

    Background The human spine is often exposed to mechanical load in vocational activities especially in combination with lifting, carrying and positioning of heavy objects. This also applies in particular to nursing activities with manual patient handling. In the present study a detailed investigation on the load of the lumbar spine during manual patient handling was performed. Methods For a total of 13 presumably endangering activities with transferring a patient, the body movements performed by healthcare workers were recorded and the exerted action forces were determined with regard to magnitude, direction and lateral distribution in the time course with a "measuring bed", a "measuring chair" and a "measuring floor". By the application of biomechanical model calculations the load on the lowest intervertebral disc of the lumbar spine (L5-S1) was determined considering the posture and action force data for every manual patient handling. Results The results of the investigations reveal the occurrence of high lumbar load during manual patient handling activities, especially in those cases, where awkward postures of the healthcare worker are combined with high action forces caused by the patient's mass. These findings were compared to suitable issues of corresponding investigations provided in the literature. Furthermore measurement-based characteristic values of lumbar load were derived for the use in statement procedures concerning the disease no. 2108 of the German list of occupational diseases. Conclusions To protect healthcare workers from mechanical overload and the risk of developing a disc-related disease, prevention measures should be compiled. Such measures could include the application of "back-fairer" nursing techniques and the use of "technical" and" small aids" to reduce the lumbar load during manual patient handling. Further studies, concerning these aspects, are necessary. PMID:21615895

  10. Characteristics, Adverse Events, and Racial Differences Among Delivering Mothers with Peripartum Cardiomyopathy

    PubMed Central

    Kao, David P; Hsich, Eileen; Lindenfeld, JoAnn

    2013-01-01

    Objectives To identify clinical features associated with peripartum cardiomyopathy (PPCM) and possible racial differences, and to quantify in-hospital outcomes in delivering mothers with PPCM. Background Investigation of patient characteristics and outcomes in PPCM has been limited to small cohorts. Hospital discharge data allows assembly of the largest number of PPCM cases to date. Methods Hospital records from six states were screened for PPCM. Clinical profiles, maternal, and fetal outcomes in delivering mothers with and without PPCM were compared and stratified by race. A maternal major adverse event (MAE) was defined as death, cardiac arrest, heart transplantation, or mechanical circulatory support. Logistic regression was used to identify variables associated with PPCM. Results In total, 535/4,003,914 records of delivering mothers specified a diagnosis of PPCM. Prevalence of PPCM was highest among African-Americans and similar in Caucasians and Hispanics. Established risk factors including age ≥ 30 years, African-American race, hypertension, preeclampsia/eclampsia, and multigestational status were associated with PPCM, and novel associations such as anemia and asthma were identified. Autoimmune disease and substance abuse, which can cause cardiomyopathy independently, were also associated with PPCM. Maternal MAE (odds ratio=436, p<0.0001) and stillbirth (odds ratio=3.8, p<0.0001) occurred more frequently among women with PPCM. Conclusions The prevalence of PPCM at the time of delivery in Hispanics was similar to Caucasians and lower than African-Americans. Autoimmune disease, substance abuse, anemia and asthma were conditions associated with PPCM not consistently identified in smaller cohorts. PPCM was also associated with increased risk of stillbirth and maternal MAEs at delivery. PMID:24163791

  11. Unplanned Intensive Care Unit Admission following Elective Surgical Adverse Events: Incidence, Patient Characteristics, Preventability, and Outcome

    PubMed Central

    Meziane, Mohammed; El Jaouhari, Sidi Driss; ElKoundi, Abdelghafour; Bensghir, Mustapha; Baba, Hicham; Ahtil, Redouane; Aboulaala, Khalil; Balkhi, Hicham; Haimeur, Charki

    2017-01-01

    Context: Adverse events (AEs) are a persistent and an important reason for Intensive Care Unit (ICU) admission. They lead to death, disability at the time of discharge, unplanned ICU admission (UIA), and prolonged hospital stay. They impose large financial costs on health-care systems. Aims: This study aimed to determine the incidence, patient characteristics, type, preventability, and outcome of UIA following elective surgical AE. Settings and Design: This is a single-center prospective study. Methods: Analysis of 15,372 elective surgical procedures was performed. We defined UIA as an ICU admission that was not anticipated preoperatively but was due to an AE occurring within 5 days after elective surgery. Statistical Analysis: Descriptive analysis using SPSS software version 18 was used for statistical analysis. Results: There were 75 UIA (0.48%) recorded during the 2-year study period. The average age of patients was 54.64 ± 18.02 years. There was no sex predominance, and the majority of our patients had an American Society of Anesthesiologist classes 1 and 2. Nearly 29% of the UIA occurred after abdominal surgery and 22% after a trauma surgery. Regarding the causes of UIA, we observed that 44 UIA (58.7%) were related to surgical AE, 24 (32%) to anesthetic AE, and 7 (9.3%) to postoperative AE caused by care defects. Twenty-three UIA were judged as potentially preventable (30.7%). UIA was associated with negative outcomes, including increased use of ICU-specific interventions and high mortality rate (20%). Conclusions: Our analysis of UIA is a quality control exercise that helps identify high-risk patient groups and patterns of anesthesia or surgical care requiring improvement.

  12. In Flight Evaluation of Active Inceptor Force-Feel Characteristics and Handling Qualities

    DTIC Science & Technology

    2012-05-01

    Concepts Airborne Laboratory ( RASCAL ) JUH- 60A in-flight simulator with an active center stick, and in Germany DLR is utilizing their Active Control...susceptible to bio-feedback interference with the slalom task. It should be noted that when flying the slalom task in the AFDD JUH- 60A RASCAL the...handling qualities has been conducted with a center stick cyclic on the RASCAL JUH- 60A , and initiated with a side stick on the ACT/FHS EC-135. In

  13. Preliminary study of ground handling characteristics of Buoyant Quad Rotor (BQR) vehicles

    NASA Technical Reports Server (NTRS)

    Browning, R. G. E.

    1980-01-01

    A preliminary investigation of mooring concepts appropriate for heavy lift buoyant quad rotor (BQR) vehicles was performed. A review of the evolution of ground handling systems and procedures for all airship types is presented to ensure that appropriate consideration is given to past experiences. Two buoyant quad rotor designs are identified and described. An analysis of wind loads on a moored airship and the effects of these loads on vehicle design is provided. Four mooring concepts are assessed with respect to the airship design, wind loads and mooring site considerations. Basing requirements and applicability of expeditionary mooring at various operational scenarios are addressed.

  14. The effects of selected modern technological concepts on the performance and handling characteristics of LTA vehicles

    NASA Technical Reports Server (NTRS)

    Mazza, C. J.

    1975-01-01

    The results of an airship design sensitivity study are presented. A wide variety of airship design concepts, including the classical and high aero-lift augmented-hybrids are examined with regard to specific technological improvements, and consequent gains in performance, stability and control and flying qualities. Variations in size, payload, power required and airspeed are quantitatively analyzed for airships representing aero-to-buoyant lift ratios of zero to 3.0 over a range of technology improvements implying reduced drag, reduced structural weight fractions and lighter, more efficient propulsion systems. Qualitatively, future airships are discussed in terms of stability, control and flying qualities requirements dictated by projected demands for vastly improved operational effectiveness and ease of handling. Such topics include stability augmentation systems, load-alleviation systems and total computer state-sensing and controls management systems. It was shown that, for the most part, highly refined conventional designs offer attractive gains in both performance and ease of handling. Hybrid airships represent a good potential for missions requiring the transport of heavy payloads at higher airspeeds over shorter ranges without the capability for sustained hover and vertical flight.

  15. PFP Commercial Grade Food Pack Cans for Plutonium Handling and Storage Critical Characteristics

    SciTech Connect

    BONADIE, E.P.

    2000-10-26

    This document specifies the critical characteristics for containers procured for Plutonium Finishing Plant's (PFP's) Vault Operations system as required by HNF-PRO-268 and HNF-PRO-1819. These are the minimum specifications that the equipment must meet in order to perform its safety function.

  16. Release characteristics of single-wall carbon nanotubes during manufacturing and handling

    NASA Astrophysics Data System (ADS)

    Ogura, I.; Kotake, M.; Hashimoto, N.; Gotoh, K.; Kishimoto, A.

    2013-04-01

    We investigated the release characteristics of single-wall carbon nanotubes (CNTs) synthesized by a pilot-scale plant. In addition to on-site aerosol measurements at the pilot-scale plant where the CNTs were synthesized, harvested, and packed, we conducted dustiness tests by vortex shaking and by transferring CNTs from one bowl to another. In the results of the on-site aerosol measurements, slight increases in the concentration were observed by aerosol monitoring instruments in the enclosure where CNTs were harvested and packed. In filter samples collected in this enclosure, micron-sized CNT clusters were observed by electron microscopy analysis. For samples collected outside the enclosure or during other processes, no CNTs were observed. The concentrations of elemental carbon at all locations were lower than the proposed occupational exposure limits of CNTs. The results of the dustiness tests revealed that submicron-sized particles were dominant in the number concentration measured by aerosol monitoring instruments, whereas micron-sized CNT clusters were mainly observed by electron microscopy analysis. The results of dustiness tests indicate that these CNTs have a low release characteristic. The lower drop impact of CNT clusters due to their lower bulk density resulted in lower CNT release from falling CNTs.

  17. Adverse reactions to sunscreen agents: epidemiology, responsible irritants and allergens, clinical characteristics, and management.

    PubMed

    Heurung, Ashley R; Raju, Srihari I; Warshaw, Erin M

    2014-01-01

    Sunscreen is a key component in the preventive measures recommended by dermatologists and public health campaigns aimed at reducing sunburn, early skin aging, and skin cancer. To maximize compliance, adverse reactions to sunscreens should be minimized. Although inactive ingredients cause many of these reactions, it is important for dermatologists to be aware of reactions to active ultraviolet filters. There are approximately 120 chemicals that can function as ultraviolet (UV) filters. This review focuses on the 36 most common filters in commercial and historical use. Of these, 16 are approved for use by the US Food and Drug Administration. The benzophenones and dibenzoylmethanes are the most commonly implicated UV filters causing allergic and photoallergic contact dermatitis (PACD) reactions; benzophenone-3 is the leading allergen and photoallergen within this class. When clinically indicated, patch and photopatch testing should be performed to common UV filters.

  18. Adverse Health Outcomes, Perpetrator Characteristics, and Sexual Violence Victimization among U.S. Adult Males

    ERIC Educational Resources Information Center

    Choudhary, Ekta; Coben, Jeffrey; Bossarte, Robert M.

    2010-01-01

    In the United States, an estimated three million men are victims of sexual violence each year, yet the majority of existing studies have evaluated the consequences and characteristics of victimization among women alone. The result has been a gap in the existing literature examining the physical and psychological consequences of sexual assault…

  19. Associations between adverse childhood experiences and clinical characteristics of eating disorders

    PubMed Central

    Guillaume, S.; Jaussent, I.; Maimoun, L.; Ryst, A.; Seneque, M.; Villain, L.; Hamroun, D.; Lefebvre, P.; Renard, E.; Courtet, Ph.

    2016-01-01

    Patients with eating disorders (EDs) frequently report a history of childhood trauma (CT). We investigated whether certain subtypes of CT are associated with more severe features of EDs, independently of psychiatric comorbidity, and whether they act additively. One hundred and ninety-two patients with DSM-V-defined EDs were consecutively recruited. Five clinical characteristics were assessed: restraint, eating, shape and weight concerns on the EDE-Q, and daily functioning. CT was assessed by the childhood traumatism questionnaire. The clinical features were associated with at least one CT subtype (emotional, sexual or physical abuse, emotional neglect). Multivariate analyses adjusted for lifetime comorbid psychiatric disorders revealed that emotional abuse independently predicted higher eating, shape and weight concerns and lower daily functioning, whereas sexual and physical abuse independently predicted higher eating concern. A dose-effect relationship characterised the number of CT subtypes and the severity of the clinical features, suggesting a consistent and partly independent association between CT and more severe clinical and functional characteristics in EDs. Emotional abuse seems to have the most specific impact on ED symptoms. Last, not all CT subtypes have the same impact but they do act additively. PMID:27804994

  20. Evaluation of COSTAR mass handling characteristics in an environment. A simulation of the Hubble Space Telescope service mission

    NASA Technical Reports Server (NTRS)

    Rajulu, Sudhakar L.; Klute, Glenn K.; Fletcher, Lauren

    1994-01-01

    The STS-61 Shuttle mission, which took place in December 1993, was solely aimed at servicing the Hubble Space Telescope (HST). Successful completion of this mission was critical to NASA since it was necessary to rectify a flaw in the HST mirror. In addition, NASA had never scheduled a mission with such a high quantity of complex extravehicular activity. To meet the challenge of this mission, the STS-61 crew trained extensively in the Weightless Environment Test Facility at the Johnson Space Center and in the Neutral Buoyancy Simulator at the Marshall Space Flight Center. However, it was suspected that neutral buoyancy training might induce negative training by virtue of the viscous damping effect present in water. The mockups built for this training also did not have the mass properties of the actual orbital replacement units (ORUs). It was felt that the crew should be further trained on mockups with similar mass characteristics. A comprehensive study was designed to address these issues. The study was quantitative, and instrumentation was set up to measure and quantify the forces and moments experienced during ORU mass handling and remote manipulator system run conditions.

  1. Maternal characteristics, pregnancy complications and adverse birth outcomes among women with disabilities

    PubMed Central

    Clements, Karen M.; Zhang, Jianying; Iezzoni, Lisa I.; Smeltzer, Suzanne C.; Long-Bellil, Linda M.

    2015-01-01

    Objectives The objective of this study is to describe the maternal characteristics, pregnancy complications, and birth outcomes among a representative sample of Rhode Island women with disabilities who recently gave birth. Methods Data from the 2002–2011 Rhode Island Pregnancy Risk Assessment Monitoring System (PRAMS) survey were analyzed. Results Approximately 7% of women in Rhode Island reported a disability. Women with disabilities reported significant disparities in their health care utilization, health behaviors and health status before and during pregnancy and during the postpartum period. Compared to nondisabled women, they were significantly more likely to report stressful life events and medical complications during their most recent pregnancy, were less likely to receive prenatal care in the first trimester, and more likely to have preterm births (13.4%; 95% CI, 11.6–15.6 compared to 8.9%; 95% CI, 8.5–9.3 for women without disabilities) and low birth weight babies (10.3%; 95% CI, 9.4–11.2 compared to 6.8%; 95% CI, 6.8–6.9). There was no difference in the rates of cesarean section between women with and without disabilities. Conclusion These findings support the need for clinicians providing care to pregnant women with disabilities to be aware of the increased risk for medical problems during pregnancy and factors that increase the risk for poor infant outcomes. PMID:26492209

  2. Situational and personal characteristics associated with adverse weather encounters by pilots.

    PubMed

    Hunter, David R; Martinussen, Monica; Wiggins, Mark; O'Hare, David

    2011-01-01

    Weather conditions are significant hazards impacting the safe and efficient operation of aircraft. In this study, a large number of pilots were surveyed regarding weather events, and the circumstances associated with those events. Pilots completed a web-based questionnaire containing demographic questions, a risk perception scale, a hazardous events scale, and a pilot judgment scale. The pilots who reported a flight in which they penetrated weather without authorization or were concerned about the weather also completed 53 questions regarding their weather encounter. Usable data were obtained for 364 participants: 144 who reported flying into weather, 114 who experienced a flight on which weather was a concern, and 106 who reported no flights on which weather was entered or was a major concern. Significant differences were evident between the three groups on the measures of pilot judgment, personal minimums, and hazardous events where pilots flying into weather recorded the poorest scores (least conservative minimums, most hazardous events, and poorest judgment). Significant differences were also noted between the two weather groups for a number of circumstances surrounding the events. Compared to the in-weather group, pilots in the near-weather group had acquired greater instrument hours, were older, and were more likely to have an instrument rating. Their aircraft were more likely to have an autopilot. More pilots in the in-weather group (28%) reported that they would be much more careful in the future regarding weather, compared to 17% of the near-weather group. The study provides data not previously obtained on both the situational and personal characteristics that are related to involvement in different degrees of weather-related encounters. These data should promote a better understanding of these individuals and the situations in which they are involved, and should inform future research and intervention efforts.

  3. Influence of Handling Parameters on Coating Characteristics in Order to Produce Near-Net-Shape Wear Resistant Coatings

    NASA Astrophysics Data System (ADS)

    Tillmann, W.; Krebs, B.

    2012-06-01

    The present study investigates the influence of spray torch handling parameters such as the spray angle, spray distance, track pitch, and gun velocity on the deposition rate and the microstructure of atmospheric plasma sprayed WC-12Co coatings as well as twin wire arc sprayed WSC-Fe coatings. Similarities as well as fundamental differences in the sensitivity of the two spray processes, regarding changes in handling parameters are discussed, using results of light microscopic analyses. Both coating systems show distinct changes of the deposition rate when varying the handling parameters. An empirical model could be determined to describe the coating deposition. This model enables an optimization of path planning processes by reducing the number of optimization loops. However, the coatings show visible changes in the microstructure, which have to be taken into consideration in order to guarantee the production of high quality coatings.

  4. The mediating and moderating effects of workplace social capital on the associations between adverse work characteristics and psychological distress among Japanese workers.

    PubMed

    Oshio, Takashi; Inoue, Akiomi; Tsutsumi, Akizumi

    2014-01-01

    Our current study investigated how workplace social capital (WSC) mediates and moderates the associations between adverse work characteristics and psychological distress among Japanese workers. We collected cross-sectional data (N=9,350) from a baseline survey of an occupational Japanese cohort study. We focused on individual WSC and considered job demands/control, effort/reward, and two types (i.e., procedural and interactional) of organizational justice as work-characteristic variables. We defined psychological distress as a score of ≥5 on the Kessler Psychological Distress Scale (K6 scale). Multivariate logistic regression analyses predicted a binary variable of psychological distress by individual WSC and adverse work characteristics, adjusting for individual-level covariates. Individual WSC mediated the associations between adverse work characteristics and psychological distress in almost all model specifications. Additionally, individual WSC moderated the associations of psychological distress with high job demands, high effort, and low interactional justice when we used a high WSC cutoff point. In contrast, individual WSC did not moderate such interactions with low job control, reward, or procedural justice. We concluded that individual WSC mediated the associations between adverse work characteristics and psychological distress among Japanese workers while selectively moderating their associations at high levels of WSC.

  5. Clinically Inconsequential Alerts: The Characteristics of Opioid Drug Alerts and Their Utility in Preventing Adverse Drug Events in the Emergency Department

    PubMed Central

    Genco, Emma K.; Forster, Jeri E.; Flaten, Hanna; Goss, Foster; Heard, Kennon J.; Hoppe, Jason; Monte, Andrew A.

    2016-01-01

    Study objective We examine the characteristics of clinical decision support alerts triggered when opioids are prescribed, including alert type, override rates, adverse drug events associated with opioids, and preventable adverse drug events. Methods This was a retrospective chart review study assessing adverse drug event occurrences for emergency department (ED) visits in a large urban academic medical center using a commercial electronic health record system with clinical decision support. Participants include those aged 18 to 89 years who arrived to the ED every fifth day between September 2012 and January 2013. The main outcome was characteristics of opioid drug alerts, including alert type, override rates, opioid-related adverse drug events, and adverse drug event preventability by clinical decision support. Results Opioid drug alerts were more likely to be overridden than nonopioid alerts (relative risk 1.35; 95% confidence interval [CI] 1.21 to 1.50). Opioid drug-allergy alerts were twice as likely to be overridden (relative risk 2.24; 95% CI 1.74 to 2.89). Opioid duplicate therapy alerts were 1.57 times as likely to be overridden (95% CI 1.30 to 1.89). Fourteen of 4,581 patients experienced an adverse drug event (0.31%; 95% CI 0.15% to 0.47%), and 8 were due to opioids (57.1%). None of the adverse drug events were preventable by clinical decision support. However, 46 alerts were accepted for 38 patients that averted a potential adverse drug event. Overall, 98.9% of opioid alerts did not result in an actual or averted adverse drug event, and 96.3% of opioid alerts were overridden. Conclusion Overridden opioid alerts did not result in adverse drug events. Clinical decision support successfully prevented adverse drug events at the expense of generating a large volume of inconsequential alerts. To prevent 1 adverse drug event, providers dealt with more than 123 unnecessary alerts. It is essential to refine clinical decision support alerting systems to eliminate

  6. The handling qualities and flight characteristics of the Grumman design 698 simulated twin-engine tilt Nacelle V/STOL aircraft

    NASA Technical Reports Server (NTRS)

    Eskey, M. A.; Wilson, S. B., III

    1986-01-01

    This paper describes three government-conducted, piloted flight simulations of the Grumman Design 698 vertical and short takeoff and landing (V/STOL) aircraft. Emphasis is placed on the aircraft's handling qualities as rated by various NASA, Navy, and Grumman Aerospace Corporating pilots with flight experience ranging from conventional takeoff and landing (CTOL) to V/STOL aircraft. Each successive simulation incorporated modifications to the aircraft in order to resolve the flight problems which were of most concern to the pilots in the previous simulation. The objective of the first simulation was to assess the basic handling qualities of the aircraft with the noncross-shafted propulsion system. The objective of the second simulation was to examine the effects of incorporating the cross-shafted propulsion system. The objective of the third simulation was to examine inoperative single-engine characteristics with and without cross-shafted engines.

  7. Tissue reactivity and suture handling characteristics of “jimat” against silk and chromic gut in cat thigh muscle: A comparative study

    PubMed Central

    Bekele, Tilahun; Bhokre, A. P.; Tesfaye, Abreha

    2015-01-01

    Aim: This study was conducted to evaluate and compare the tissue reactivity and suture handling characteristics of chromic gut, silk, and ‘jimat’ suture materials in cat thigh muscle. Materials and Methods: This experimental study was conducted from November, 2013 to April, 2014 in Kombolcha Animal Diseases Survey, Research and Diagnostic Laboratory, Kombolcha, Ethiopia. A total of 36 local breed male cats were randomly assigned into chromic gut, silk, and “jimat” groups of 12 cats each as A, B, and C, respectively. The hind leg muscle biceps femoris was incised and sutured with suture materials according to their groups. The muscle samples with its suture were collected at six different days interval i.e. 1, 3, 7, 14, 21, and 28 and processed histopathologically to assess the degree of leukocytic infiltration and fibrous and granulation tissue formation (GTF). In addition, all suture materials were evaluated intraoperatively about their handling characteristics, by rating the precision of knot tying, square knot positioning, and resistance to knot slippage. The statistical analysis was done with two-way ANOVA, Kruskal–Wallis, and Chi-square tests. Results: The histopathology showed that “jimat” thread (2.4±1.2) had produced least leukocytic infiltration than chromic gut (4.5±1.9) and silk (4.3±1.5) sutures during the study period. Higher GTF was seen at day 3 (6 [100%]), 7 (6 [100%]) and day 14 (4 [66.7%]) in all sutures, whereas “jimat” showed significantly (p<0.05) higher fibrous tissue formation (10 [83.3%]) than others. Moreover, “jimat” suture had equal suture handling characteristics (p>0.05) with both chromic gut and silk. Conclusion: The result indicated that a single strand “jimat” thread appears to be the most satisfactory suture material as regards to both tissue reaction and suture handling characteristics for skeletal muscle approximation in cats and provided that studies on its carcinogenic effects should be done. PMID

  8. Droplet Handling

    NASA Astrophysics Data System (ADS)

    Torii, Toru

    When quantitative analysis or quantitative chemical synthesis is performed using a micrototal analysis system (microTAS), the technologies for precise metering, transporting, and mixing of droplets are required. In this chapter, several technologies for the handling of droplets are described. For metering, dispensing and transporting of droplets, pneumatic and electrokinetic forces are used. Separation of cells and particles is also performed by electrical operation. Other handling technique, such as ultrasonic or centrifugal force applications, are also reviewed. Robotic synthesis devices or high throughput screening devices are promising applications for these technologies.

  9. Droplet handling.

    PubMed

    Torii, Toru

    2010-01-01

    When quantitative analysis or quantitative chemical synthesis is performed using a micrototal analysis system (microTAS), the technologies for precise metering, transporting, and mixing of droplets are required. In this chapter, several technologies for the handling of droplets are described. For metering, dispensing and transporting of droplets, pneumatic and electrokinetic forces are used. Separation of cells and particles is also performed by electrical operation. Other handling technique, such as ultrasonic or centrifugal force applications, are also reviewed. Robotic synthesis devices or high throughput screening devices are promising applications for these technologies.

  10. Novel adaptations to zinc-silicate glass polyalkenoate cements: the unexpected influences of germanium based glasses on handling characteristics and mechanical properties.

    PubMed

    Dickey, B T; Kehoe, S; Boyd, D

    2013-07-01

    Aluminum-free glass polyalkenoate cements (GPC) have been hindered for use as injectable bone cements by their inability to balance handling characteristics with mechanical integrity. Currently, zinc-based, aluminum-free GPCs demonstrate compression strengths in excess of 60MPa, but set in c. 1-2 min. Previous efforts to extend the setting reaction have remained clinically insufficient and are typically accompanied by a significant drop in strength. This work synthesized novel glasses based on a zinc silicate composition with the inclusion of GeO2, ZrO2, and Na2O, and evaluated the setting reaction and mechanical properties of the resultant GPCs. Germanium based GPCs were found to have working times between 5 and 10 min, setting times between 14 and 36 min, and compression strengths in excess of 30 MPa for the first 30 days. The results of this investigation have shown that the inclusion of GeO2, ZrO2, and Na2O into the glass network have produced, for the first time, an aluminum-free GPC that is clinically viable as injectable bone cements with regards to handling characteristics and mechanical properties.

  11. Economics and operating characteristics of various materials-handling systems and wood fuels in small- to medium-sized boilers. Final report

    SciTech Connect

    Levi, M.P.; Bradfield, J.; Elliott, R.N.; Holman, W.E.; O'Grady, M.J.

    1980-01-01

    The objectives of this project were to study the cost and operating characteristics of various wood energy systems and to develop guidelines for the design for such systems. Emphasis was placed on whole-tree chips (WTC), and wood pellet fuels. The project evaluates the economics and some of the handling and burning characteristics of whole-tree chips burned in two commercial boilers designed to burn bark and refuse respectively, and of wood pellets burned in a small stoker-fed coal boiler; investigates the effect of storage conditions on the quality of pellets produced from southern pine; and develops guidelines to help plant managers, engineers, and other decision-makers become more familiar with wood energy systems.

  12. Nutrient- and non-nutrient-based natural health product (NHP) use in adults with mood disorders: prevalence, characteristics and potential for exposure to adverse events

    PubMed Central

    2013-01-01

    Background To address knowledge gaps regarding natural health product (NHP) usage in mental health populations, we examined their use in adults with mood disorders, and explored the potential for adverse events. Methods Food and NHP intake was obtained from 97 adults with mood disorders. NHP data was used to compare prevalence with population norms (British Columbia Nutrition Survey; BCNS). Bivariate and regression analyses examined factors associated with NHP use. Assessment of potential adverse effects of NHP use was based on comparing nutrient intakes from food plus supplements with the Dietary Reference Intakes and by reviewing databases for reported adverse health effects. Results Two-thirds (66%; 95% CI 56 to 75) were taking at least one NHP; 58% (95% CI 47 to 68) were taking NHPs in combination with psychiatric medications. The proportion of each type of NHP used was generally higher than the BCNS (range of p’s < 0.05 to 0.0001). When intakes from food and NHP sources were combined, a small proportion exceeded any Lowest-Observed-Adverse-Effect-Levels: only for niacin (n = 17) and magnesium (n = 6), two nutrients for which the potential for adverse effects is minimal. Conversely, about 38% (95% CI 28 to 49) of the sample were taking a non-nutrient based NHP for which previous adverse events had been documented. Conclusions The prevalent use of NHPs in this population suggests that health care providers need to be knowledgeable about their characteristics. The efficacy and safety of NHPs in relation to mental health warrants further investigation. PMID:23570306

  13. Assessment of Nanoparticle Exposure in Nanosilica Handling Process: Including Characteristics of Nanoparticles Leaking from a Vacuum Cleaner

    PubMed Central

    KIM, Boowook; KIM, Hyunwook; YU, Il Je

    2013-01-01

    Nanosilica is one of the most widely used nanomaterials across the world. However, their assessment data on the occupational exposure to nanoparticles is insufficient. The present study performed an exposure monitoring in workplace environments where synthetic powders are prepared using fumed nanosilica. Furthermore, after it was observed during exposure monitoring that nanoparticles were emitted through leakage in a vacuum cleaner (even with a HEPA-filter installed in it), the properties of the leaked nanoparticles were also investigated. Workers were exposed to high-concentration nanosilica emitted into the air while pouring it into a container or transferring the container. The use of a vacuum cleaner with a leak (caused by an inadequate sealing) was found to be the origin of nanosilica dispersion in the indoor air. While the particle size of the nanosilica that emitted into the air (during the handling of nanosilica by a worker) was mostly over 100 nm or several microns (µm) due to the coagulation of particles, the size of nanosilica that leaked out of vacuum cleaner was almost similar to the primary size (mode diameter 11.5 nm). Analysis of area samples resulted in 20% (60% in terms of peak concentration) less than the analysis of the personals sample. PMID:24366536

  14. Assessment of nanoparticle exposure in nanosilica handling process: including characteristics of nanoparticles leaking from a vacuum cleaner.

    PubMed

    Kim, Boowook; Kim, Hyunwook; Yu, Il Je

    2014-01-01

    Nanosilica is one of the most widely used nanomaterials across the world. However, their assessment data on the occupational exposure to nanoparticles is insufficient. The present study performed an exposure monitoring in workplace environments where synthetic powders are prepared using fumed nanosilica. Furthermore, after it was observed during exposure monitoring that nanoparticles were emitted through leakage in a vacuum cleaner (even with a HEPA-filter installed in it), the properties of the leaked nanoparticles were also investigated. Workers were exposed to high-concentration nanosilica emitted into the air while pouring it into a container or transferring the container. The use of a vacuum cleaner with a leak (caused by an inadequate sealing) was found to be the origin of nanosilica dispersion in the indoor air. While the particle size of the nanosilica that emitted into the air (during the handling of nanosilica by a worker) was mostly over 100 nm or several microns (µm) due to the coagulation of particles, the size of nanosilica that leaked out of vacuum cleaner was almost similar to the primary size (mode diameter 11.5 nm). Analysis of area samples resulted in 20% (60% in terms of peak concentration) less than the analysis of the personals sample.

  15. The basic characteristics of hybrid aircraft. [structural design criteria and weight analysis of airships for materials handling

    NASA Technical Reports Server (NTRS)

    Nichols, J. B.

    1975-01-01

    The transportation of very heavy or very bulky loads by airships, and the ability to carry out extended duration flights at low speeds and low costs was studied. Structural design and weight factors for airship construction are examined. The densities of various light gases to be used in airships are given, along with their lifting capacities. The aerodynamic characteristics of various airship configurations was studied. Propulsion system requirements for airships are briefly considered.

  16. Quantities and characteristics of the contact-handled low-level mixed waste streams for the DOE complex

    SciTech Connect

    Huebner, T.L.; Wilson, J.M.; Ruhter, A.H.; Bonney, S.J.

    1994-08-01

    This report supports the Integrated Thermal Treatment System (ITTS) Study initiated by the Department of Energy (DOE) Office of Technology Development (EM-50), which is a system engineering assessment of a variety of mixed waste treatment process. The DOE generates and stores large quantities of mixed wastes that are contaminated with both chemically hazardous and radioactive species. The treatment of these mixed wastes requires meeting the standards established by the Environmental Protection Agency for the specific hazardous contaminants regulated under the Resource Conservation and Recovery Act while also providing adequate control of the radionuclides. The thrust of the study is to develop preconceptual designs and life-cycle cost estimates for integrated thermal treatment systems ranging from conventional incinerators, such as rotary kiln and controlled air systems, to more innovative but not yet established technologies, such as molten salt and molten metal waste destruction systems. Prior to this engineering activity, the physical and chemical characteristics of the DOE low-level mixed waste streams to be treated must be defined or estimated. This report describes efforts to estimate the DOE waste stream characteristics.

  17. Clinical Characteristics and Predictors of Adverse Outcome in Adult and Pediatric Patients With Healthcare-Associated Ventriculitis and Meningitis

    PubMed Central

    Srihawan, Chanunya; Castelblanco, Rodrigo Lopez; Salazar, Lucrecia; Wootton, Susan H.; Aguilera, Elizabeth; Ostrosky-Zeichner, Luis; Sandberg, David I.; Choi, HuiMahn A.; Lee, Kiwon; Kitigawa, Ryan; Tandon, Nitin; Hasbun, Rodrigo

    2016-01-01

    Background. Healthcare-associated meningitis or ventriculitis is a serious and life-threatening complication of invasive neurosurgical procedures or penetrating head trauma. Methods. We performed a retrospective study of adults and children with the diagnosis of healthcare-associated meningitis or ventriculitis, as defined by the 2015 Centers of Disease Control and Prevention case definition, at 2 large tertiary care hospitals in Houston, Texas from July 2003 to November 2014. Patients were identified by infection control practitioners and by screening cerebrospinal fluid samples sent to the central laboratory. We collected data on demographics, clinical presentations, laboratory results, imaging studies, treatments, and outcomes. Results. A total of 215 patients were included (166 adults and 49 children). A positive cerebrospinal fluid culture was seen in 106 (49%) patients, with the majority of the etiologies being Staphylococcus and Gram-negative rods. An adverse clinical outcome was seen in 167 patients (77.7%) and was defined as death in 20 patients (9.3%), persistent vegetative state in 31 patients (14.4%), severe disability in 77 patients (35.8%), or moderate disability in 39 patients (18.1%). On logistic regression analysis, age >45 years (adjusted odds ratio [OR], 6.47; 95% confidence interval [CI], 2.31–18.11; P ≤ .001), abnormal neurological exam (adjusted OR, 3.04; 95% CI, 1.27–7.29; P = .013), and mechanical ventilation (adjusted OR, 5.34; 95% CI, 1.51–18.92; P = .01) were associated with an adverse outcome. Conclusions. Healthcare-associated meningitis or ventriculitis is associated with significant morbidity and mortality. PMID:27419154

  18. Delivery characteristics and patients' handling of two single-dose dry-powder inhalers used in COPD.

    PubMed

    Chapman, Kenneth R; Fogarty, Charles M; Peckitt, Clare; Lassen, Cheryl; Jadayel, Dalal; Dederichs, Juergen; Dalvi, Mukul; Kramer, Benjamin

    2011-01-01

    For optimal efficacy, an inhaler should deliver doses consistently and be easy for patients to use with minimal instruction. The delivery characteristics, patients' correct use, and preference of two single-dose dry powder inhalers (Breezhaler and HandiHaler) were evaluated in two complementary studies. The first study examined aerodynamic particle size distribution, using inhalation profiles of seven patients with moderate to very severe chronic obstructive pulmonary disease (COPD). The second was an open-label, two-period, 7-day crossover study, evaluating use of the inhalers with placebo capsules by 82 patients with mild to severe COPD. Patients' correct use of the inhalers was assessed after reading written instructions on Day 1, and after training and 7 days of daily use. Patients' preference was assessed after completion of both study periods. Patient inhalation profiles showed average peak inspiratory flows of 72 L/minute through Breezhaler and 36 L/minute through HandiHaler. For Breezhaler and HandiHaler, fine particle fractions were 27% and 10%, respectively. In the second study, correct use of Breezhaler and HandiHaler was achieved by > 77% of patients for any step after 7 days; 61% of patients showed an overall preference for Breezhaler and 31% for HandiHaler (P = 0.01).Breezhaler is a low-resistance inhaler suitable for use by patients with a range of disease severities. Most patients used both inhalers correctly after 7 days, but more patients showed an overall preference for the Breezhaler compared with the HandiHaler. These are important factors for optimum dose delivery and successful COPD management.

  19. Comparing characteristics of adverse drug events between older and younger adults presenting to a Taiwan emergency department.

    PubMed

    Chen, Yen-Chia; Huang, Hsien-Hao; Fan, Ju-Sing; Chen, Min-Hui; Hsu, Teh-Fu; Yen, David Hung-Tsang; Huang, Mu-Shung; Wang, Chien-Ying; Huang, Chun-I; Lee, Chen-Hsen

    2015-02-01

    To compare the proportion, seriousness, preventability of adverse drug events (ADEs) between the older adults (≥ 65 years old) and younger adults (<65 years old) presenting to the emergency department (ED), we conducted a prospective observational cohort study of patients 18 years and older presenting to the ED. For all ED visits between March 1, 2009, and Feb 28, 2010, investigators identified ADEs and assessed cases using the Naranjo adverse drug reaction probability scale. Outcomes (proportion, seriousness, and preventability of ADE, length of ED stay, and hospitalization) and associated variables were measured and compared between younger and older adults. The results showed that of 58,569 ED visits, 295 older adults, and 157 younger adults were diagnosed as having an ADE and included in our analysis. The proportion of ADEs leading to ED visits in the older group, 14.3 per 1000  (295/20,628), was significantly higher than the younger group of 4.1 per 1000  (157/37,941). The older group with ADE had a longer ED stay (odds ratio [OR] 3.5, 95% confidence interval [CI] 1.9-6.4 for stay ≥ 24 hours) and larger proportion of preventable ADEs (OR 2.2, 95% CI 1.4-3.6) than the younger group, but there was no significant difference in terms of serious ADEs (OR 0.6, 95% CI 0.3-1.3 for fatal and life threatening) and hospitalization (OR 1.5, 95% CI 0.9-2.6) between the 2 groups. In addition, patients in the older group were more likely to be male, to have symptoms of fatigue or altered mental status, to involve cardiovascular, renal, and respiratory systems, and to have higher Charlson comorbidity index scores, higher number of prescription medications, and higher proportion of unintentional overdose. In conclusion, the proportion of ADE-related ED visits in older adults was higher than younger adults, and many of these were preventable. The most common drug categories associated with preventable ADEs in the older adults were antithrombotic agents, antidiabetic

  20. Characterization of odor released during handling of swine slurry: Part II. Effect of production type, storage and physicochemical characteristics of the slurry

    NASA Astrophysics Data System (ADS)

    Blanes-Vidal, V.; Hansen, M. N.; Adamsen, A. P. S.; Feilberg, A.; Petersen, S. O.; Jensen, B. B.

    The quality of rural life can be affected by offensive odors released from animal buildings and storage units. The objectives of this study were to compare the concentrations of odor and odorants above different types of stirred swine slurry to analyze the relationships between concentrations of odor (and odorants) and physicochemical characteristics of the slurry (i.e. pH, temperature, dry matter, volatile solids, and concentration of 22 chemical compounds); and to propose predictive models for the odor concentration (OC) based on these physicochemical characteristics (solely and in combination with concentrations of specific odorants in the air above the slurries). The study comprised data on concentrations of odor and odorants in the air above slurry samples (fresh and/or stored) collected from production units with farrowing sows, finishing swines, or weaning pigs at eight swine operations ( N = 48). OC measured in the air above stirred swine slurry samples were not significantly different among production types or storage times. The physicochemical characteristics of the slurries were not useful for predicting OC or concentrations of hydrogen sulfide (or organic sulfides) above the slurry, but were related to concentrations of other emitted gases such as phenols and indoles ( r2 = 0.65-0.79, p <0.05), ammonia ( r2 = 0.86, p < 0.05) and carboxylic acids ( r2 = 0.23-0.59, p <0.05). There was good precision of predictive models of OC based on selected slurry characteristics (i.e. pH, dry matter, nitrogen content, sulfur content or concentrations of individual aromatic compounds and carboxylic acids) together with concentrations of specific odorants in the air (e.g. hydrogen sulfide) ( r2 between 0.70 and 0.92). This study suggests that predictive models could be useful for evaluating odor nuisance potentials of swine slurry during handling.

  1. 21 CFR 820.140 - Handling.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Handling. 820.140 Section 820.140 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES..., contamination, or other adverse effects to product do not occur during handling....

  2. 21 CFR 820.140 - Handling.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Handling. 820.140 Section 820.140 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES..., contamination, or other adverse effects to product do not occur during handling....

  3. Handling characteristics of a palladium-free gallium-based alloy compared with a high copper dental amalgam in a simulated clinical trial.

    PubMed

    Shaini, F J; Shortall, A C; Ellakwa, A E; Marquis, P M

    2001-11-01

    The aim of the current study was to compare the handling characteristics of a palladium-free gallium-based alloys (Galloy) with those of a high-copper amalgam (Permite C). The study had a particular interest in the evaluation of the direct placement delivery system used with both alloys. Ten dentists participated in the current study. Each placed two amalgam and two gallium-based alloy restorations in conventional class II cavities prepared in acrylic typodont teeth. None of the participating dentists had used the direct placement delivery system or had any previous experience with gallium-based alloy and no practice was allowed beforehand. The restorations were evaluated according to the following criteria: ease of loading the cavity (delivery system), ease of condensation, capacity to produce and sustain contact area, ease of carving, resistance to damage during removal of the matrix band, overall quality of the restoration and the available working time. Each criterion was given a score on a scale of 1-5 (1: very poor, 2: poor, 3: fair, 4: good, 5: very good). The results showed no statistically significant difference in the evaluated criteria between the two alloys (P > 0.05) except for criterion number 2 (ease of condensation, P=0.0005).

  4. Ground-based and in-flight simulator studies of low-speed handling characteristics of two supersonic cruise transport concepts

    NASA Technical Reports Server (NTRS)

    Grantham, W. D.; Nguyen, L. T.; Deal, P. L.; Neubauer, M. J.; Smith, P. M.; Gregory, F. D.

    1978-01-01

    Conventional and powered lift concepts for supersonic approach and landing tasks are considered. Results indicated that the transport concepts had unacceptable low-speed handling qualities with no augmentation, and that in order to achieve satisfactory handling qualities, considerable augmentation was required. The available roll-control power was acceptable for the powered-lift concept.

  5. Effects of early and late adverse experiences on morphological characteristics of Sprague-Dawley rat liver subjected to stress during adulthood

    PubMed Central

    Vásquez, Bélgica; Sandoval, Cristian; Smith, Ricardo Luiz; del Sol, Mariano

    2014-01-01

    The literature indicates that early rupture of the maternal bond and social isolation are variables involved in social and emotional behaviors and in increase in anxiety, particularly in stressful situations. The liver plays a role in the adaptation to stress, yet the possible morphologic changes that its structure can suffer have been studied very little. Therefore, the aim here was to ascertain, through the model of altering the early mother-infant bond and the late social bond through isolation, the effect on the stereologic characteristics of the liver in adult Sprague-Dawley rats subjected to intermittent chronic stress. Twenty-five newborn female rats were used, distributed into 5 groups, under standardized lactation and feeding conditions. The experimental groups were exposed to early (E1), late (E2), and early-late (E3) adverse experiences and then subjected to intermittent chronic stress in adulthood. The liver of each animal was isolated, and the stereologic characteristics of Nv, Vv, and Sv of the hepatocytes were determined. The results from the experimental groups were significantly higher than those obtained in the control groups. The highest values were found in group E3 (Nv = 4.43 ± 0.89 x 105/mm3, Vv = 68.74 ± 2.01%, Sv = 68.78 ± 3.77 mm2/mm3). Considering these results, the hepatic morphology can be affected by exposure to chronic stress; however, when the individuals have been subjected to previous adverse experiences, the changes are more evident. PMID:25197335

  6. Transportation and handling loads

    NASA Technical Reports Server (NTRS)

    Ostrem, F. E.

    1971-01-01

    Criteria and recommended practices are presented for the prediction and verification of transportation and handling loads for the space vehicle structure and for monitoring these loads during transportation and handling of the vehicle or major vehicle segments. Elements of the transportation and handling systems, and the forcing functions and associated loads are described. The forcing functions for common carriers and typical handling devices are assessed, and emphasis is given to the assessment of loads at the points where the space vehicle is supported during transportation and handling. Factors which must be considered when predicting the loads include the transportation and handling medium; type of handling fixture; transport vehicle speed; types of terrain; weather (changes in pressure of temperature, wind, etc.); and dynamics of the transportation modes or handling devices (acceleration, deceleration, and rotations of the transporter or handling device).

  7. A helicopter handling-qualities study of the effects of engine response characteristics, height-control dynamics, and excess power on nap-of-the-Earth operations

    NASA Technical Reports Server (NTRS)

    Corliss, L. D.

    1982-01-01

    The helicopter configuration with an rpm-governed gas-turbine engine was examined. A wide range of engine response time, vehicle damping and sensitivity, and excess power levels was studied. The data are compared with the existing handling-qualities specifications, MIL-F-83300 and AGARD 577, and in general show a need for higher minimums when performing such NOE maneuvers as a dolphin and bob-up task.

  8. Effects of early and late adverse experiences on morpho-quantitative characteristics of Sprague-Dawley rat spleen subjected to stress during adulthood

    PubMed Central

    Vásquez, Bélgica; Sandoval, Cristian; Smith, Ricardo Luiz; del Sol, Mariano

    2015-01-01

    Morpho-quantitative studies of the spleen indicate that the proportions of the compartments and sub-compartments are stable in normal conditions. However, disorders due to stress can influence the number and function of the immune cells in this organ. The aim of this study was to determine, through the model of altering the early mother-infant bond and altering the late social bond through isolation, the effect on the morpho-quantitative characteristics of the spleen in adult Sprague-Dawley rats subjected to intermittent chronic stress in adulthood. Twenty-five newborn female rats were used, kept under the standardized lactation and feeding conditions. The rats were assigned randomly to 2 control groups (C1 and C2) and 3 experimental groups, exposed to early (E1), late (E2) or early-late (E3) adverse experiences and then subjected to intermittent chronic stress in adulthood (C2, E1, E2 and E3). The spleen of each animal was isolated and its morphometric characteristics were determined: volume density (Vv) of the red pulp, white pulp, marginal zone, splenic lymph nodule, periarterial lymphatic sheath and germinal center; areal number density (Na), surface density (Sv), number density (Nv), diameter (D) and total number of splenic lymph nodules. The mass of each compartment was also determined. A one-way analysis of variance (ANOVA) and Scheffé’s post hoc test were used for the statistical analysis. The p values were considered significant when they were less than 0.05 (*) and very significant at less than 0.025 (**). There were significant differences in the Vv of the red pulp, white pulp and their sub-compartments between the control and experimental groups. The white pulp increased significantly (P = 0.000) in E1, E2 and E3 compared to C1 and C2. The average Na and D values of the splenic lymph nodules were also higher in the experimental groups. The ANOVA for the mass of the spleen and the red pulp revealed no differences between the groups. The mass of the

  9. The Second Opening of the Waste Isolation Pilot Plant? Review of Salient Characteristics and Unique Operational Considerations for Remote Handled Transuranic Waste

    SciTech Connect

    Anastas, G.; Walker, B.A.

    2003-02-24

    The U.S. Department of Energy (DOE) intends to dispose of remote handled (RH) transuranic (TRU) waste at the Waste Isolation Pilot Plant (WIPP) beginning in 2005. (1) Four principle regulatory agencies are involved in the process of approving the RH TRU waste activities. The DOE is responsible for operational activities. The U. S. Nuclear Regulatory Commission (NRC) approves the design and use of shipping containers. The U.S. Environmental Protection Agency (EPA) is responsible for assuring safe and environmentally effective long-term disposal of the radioactive component of the waste and operational environmental monitoring. The New Mexico Environment Department (NMED) is responsible for the handling and the disposal of the non-radioactive hazardous component of the waste. The Environmental Evaluation Group (EEG) is responsible for performing independent technical oversight of all WIPP activities, and will comment on documents and practices for the various regulated RH TRU waste activities. The DOE has already obtained the necessary approvals from the NRC, and has submitted a Class 3 Modification request to the NMED. On December 16, 2002 the DOE Carlsbad Field Office (CBFO) provided the EPA with a notice of proposed change, in accordance with 40 CFR 194.4 (b) (3), to receive and dispose of remote handled transuranic waste. (2) WIPP procedures for the management of RH TRU waste at the site are being developed. While there are no issues with current NRC Certificates of Compliance for the RH TRU waste shipping containers, it is likely that there will be some controversy over other aspects of the currently planned RH TRU waste program. These issues may include: (1) the published RH TRU waste inventory, (2) the characterization of the radionuclide portion of the waste, for which one planned method is to use dose-to-Curie conversions, and (3) the plans to use bounding estimates for the hazardous portion of the WIPP waste, rather than measuring VOCs on a container

  10. Adverse cutaneous drug reaction.

    PubMed

    Nayak, Surajit; Acharjya, Basanti

    2008-01-01

    In everyday clinical practice, almost all physicians come across many instances of suspected adverse cutaneous drug reactions (ACDR) in different forms. Although such cutaneous reactions are common, comprehensive information regarding their incidence, severity and ultimate health effects are often not available as many cases go unreported. It is also a fact that in the present world, almost everyday a new drug enters market; therefore, a chance of a new drug reaction manifesting somewhere in some form in any corner of world is unknown or unreported. Although many a times, presentation is too trivial and benign, the early identification of the condition and identifying the culprit drug and omit it at earliest holds the keystone in management and prevention of a more severe drug rash. Therefore, not only the dermatologists, but all practicing physicians should be familiar with these conditions to diagnose them early and to be prepared to handle them adequately. However, we all know it is most challenging and practically difficult when patient is on multiple medicines because of myriad clinical symptoms, poorly understood multiple mechanisms of drug-host interaction, relative paucity of laboratory testing that is available for any definitive and confirmatory drug-specific testing. Therefore, in practice, the diagnosis of ACDR is purely based on clinical judgment. In this discussion, we will be primarily focusing on pathomechanism and approach to reach a diagnosis, which is the vital pillar to manage any case of ACDR.

  11. Effects of pipothiazine palmitate on handling stress and on the characteristics of semen collected by electroejaculation in bison (Bison bison) bulls.

    PubMed

    Toosi, B M; Gratton, G; McCorkell, R B; Wynne-Edwards, K E; Woodbury, M R; Lessard, C

    2013-04-01

    Handling North American bison can pose risk to the handler and evoke stress in the animal. Moreover, this induced stress might affect qualities of semen collected by electroejaculation. The objective of this study was to investigate if a long acting neuroleptic tranquilizer (LAN) would reduce the stress of bison and thereby improve the quality of electroejaculated semen. Eight experimental replicates were conducted between May and November. In each replicate, the same six bison bulls were randomly assigned into LAN-treated (n=3) and non-treated control (n=3) groups. Pipothiazine palmitate (Piportil L4) was administered intramuscularly as a single dose of 100 mg in replicates 1-4 or 200 mg in replicates 5-8. Within each replicate, semen was collected by electroejaculation at 4, 6, 11 and 13 days post treatment. Behavioral parameters, sperm morphology and motility parameters were analyzed. A blood sample was collected before each electroejaculation and serum concentrations of testosterone, cortisol and corticosterone were determined. Treatment bulls with 100 mg of Piportil L4 reduced the restraint time and the struggling of bison bulls during handling compared to the control group (P<0.05). Semen motility parameters and serum concentrations of testosterone, cortisol and corticosterone were not significantly affected when 100mg of the LAN was administered (P>0.05). However, giving 200 mg of Piportil L4 reduced the restraint time of bison bulls and the duration of semen collection (P<0.05). Also, this treatment improved total and progressive sperm motilities when compared to the respective controls (P<0.05). Interestingly, serum concentration of corticosterone, as an endocrine stress indicator, was decreased after administration of 200mg of Pipothiazine palmitate, while testosterone concentrations were increased compared to those values in untreated control bulls (corticosterone: 0.10±0.01 compared with 0.15±0.02 ng/mL; testosterone: 9.11±1.68 compared with 5.33±0

  12. Structural interaction with transportation and handling systems

    NASA Technical Reports Server (NTRS)

    1973-01-01

    Problems involved in the handling and transportation of finished space vehicles from the factory to the launch site are presented, in addition to recommendations for properly accounting for in space vehicle structural design, adverse interactions during transportation. Emphasis is given to the protection of vehicle structures against those environments and loads encountered during transportation (including temporary storage) which would exceed the levels that the vehicle can safely withstand. Current practices for verifying vehicle safety are appraised, and some of the capabilities and limitations of transportation and handling systems are summarized.

  13. Data Handling and Citizenship

    ERIC Educational Resources Information Center

    Tresidder, Gwen

    2006-01-01

    When marking GCSE data handling coursework, the author was repeatedly reminded just how poor the level of statistical understanding is among students. In response to a feeling that the teaching of handling data topics was limited, the author and her colleague designed a project with Y8 students to try to teach statistics for a deeper…

  14. Development of the remote-handled transuranic waste radioassay data quality objectives. An evaluation of RH-TRU waste inventories, characteristics, radioassay methods and capabilities

    SciTech Connect

    Meeks, A.M.; Chapman, J.A.

    1997-09-01

    The Waste Isolation Pilot Plant will accept remote-handled transuranic waste as early as October of 2001. Several tasks must be accomplished to meet this schedule, one of which is the development of Data Quality Objectives (DQOs) and corresponding Quality Assurance Objectives (QAOs) for the assay of radioisotopes in RH-TRU waste. Oak Ridge National Laboratory (ORNL) was assigned the task of providing to the DOE QAO, information necessary to aide in the development of DQOs for the radioassay of RH-TRU waste. Consistent with the DQO process, information needed and presented in this report includes: identification of RH-TRU generator site radionuclide data that may have potential significance to the performance of the WIPP repository or transportation requirements; evaluation of existing methods to measure the identified isotopic and quantitative radionuclide data; evaluation of existing data as a function of site waste streams using documented site information on fuel burnup, radioisotope processing and reprocessing, special research and development activities, measurement collection efforts, and acceptable knowledge; and the current status of technologies and capabilities at site facilities for the identification and assay of radionuclides in RH-TRU waste streams. This report is intended to provide guidance in developing the RH-TRU waste radioassay DQOs, first by establishing a baseline from which to work, second, by identifying needs to fill in the gaps between what is known and achievable today and that which will be required before DQOs can be formulated, and third, by recommending measures that should be taken to assure that the DQOs in fact balance risk and cost with an achievable degree of certainty.

  15. CHR -- Character Handling Routines

    NASA Astrophysics Data System (ADS)

    Charles, A. C.; Rees, P. C. T.; Chipperfield, A. J.; Jenness, T.

    This document describes the Character Handling Routine library, CHR, and its use. The CHR library augments the limited character handling facilities provided by the Fortran 77 standard. It offers a range of character handling facilities: from formatting Fortran data types into text strings and the reverse, to higher level functions such as wild card matching, string sorting, paragraph reformatting and justification. The library may be used simply for building text strings for interactive applications or as a basis for more complex text processing applications.

  16. Future of remote handling

    SciTech Connect

    Grisham, D.L.; Lambert, J.E.

    1986-01-01

    The field of remote handling started in the late 1940's and early 1950's with the invention of mechanical master-slave and electromechanical manipulators. That field now consists of three major divisions: (1) conventional remote handling in fixed facilities with shielding windows and mechanical manipulators; (2) large area remote handling using portable equipment, electric master-slave manipulators, and television for viewing; and (3) the field of robotics which is beginning to be applied to repetitive operations on toxic and dangerous materials. All three divisions will continue to develop and evolve over the next decade.

  17. Handling Pyrophoric Reagents

    SciTech Connect

    Alnajjar, Mikhail S.; Haynie, Todd O.

    2009-08-14

    Pyrophoric reagents are extremely hazardous. Special handling techniques are required to prevent contact with air and the resulting fire. This document provides several methods for working with pyrophoric reagents outside of an inert atmosphere.

  18. Helicopter Handling Qualities

    NASA Technical Reports Server (NTRS)

    1982-01-01

    Helicopters are used by the military and civilian communities for a variety of tasks and must be capable of operating in poor weather conditions and at night. Accompanying extended helicopter operations is a significant increase in pilot workload and a need for better handling qualities. An overview of the status and problems in the development and specification of helicopter handling-qualities criteria is presented. Topics for future research efforts by government and industry are highlighted.

  19. Vaccine Adverse Events

    MedlinePlus

    ... Vaccines, Blood & Biologics Animal & Veterinary Cosmetics Tobacco Products Vaccines, Blood & Biologics Home Vaccines, Blood & Biologics Safety & Availability ( ... Center for Biologics Evaluation & Research Vaccine Adverse Events Vaccine Adverse Events Share Tweet Linkedin Pin it More ...

  20. [Cutaneous adverse drug reactions].

    PubMed

    Lebrun-Vignes, B; Valeyrie-Allanore, L

    2015-04-01

    Cutaneous adverse drug reactions (CADR) represent a heterogeneous field including various clinical patterns without specific features suggesting drug causality. Exanthematous eruptions, urticaria and vasculitis are the most common forms of CADR. Fixed eruption is uncommon in western countries. Serious reactions (fatal outcome, sequelae) represent 2% of CADR: bullous reactions (Stevens-Johnson syndrome, toxic epidermal necrolysis), DRESS (drug reaction with eosinophilia and systemic symptoms or drug-induced hypersensitivity syndrome) and acute generalized exanthematous pustulosis (AGEP). These forms must be quickly diagnosed to guide their management. The main risk factors are immunosuppression, autoimmunity and some HLA alleles in bullous reactions and DRESS. Most systemic drugs may induce cutaneous adverse reactions, especially antibiotics, anticonvulsivants, antineoplastic drugs, non-steroidal anti-inflammatory drugs, allopurinol and contrast media. Pathogenesis includes immediate or delayed immunologic mechanism, usually not related to dose, and pharmacologic/toxic mechanism, commonly dose-dependent or time-dependent. In case of immunologic mechanism, allergologic exploration is possible to clarify drug causality, with a variable sensitivity according to the drug and to the CADR type. It includes epicutaneous patch testing, prick test and intradermal test. However, no in vivo or in vitro test can confirm the drug causality. To determine the cause of the eruption, a logical approach based on clinical characteristics, chronologic factors and elimination of differential diagnosis is required, completed with a literature search. A reporting to pharmacovigilance network is essential in case of a serious CADR whatever the suspected drug and in any case if the involved drug is a newly marketed one or unusually related to cutaneous reactions.

  1. SPAR data handling utilities

    NASA Technical Reports Server (NTRS)

    Giles, G. L.; Haftka, R. T.

    1978-01-01

    The SPAR computer software system is a collection of processors that perform particular steps in the finite-element structural analysis procedure. The data generated by each processor are stored on a data base complex residing on an auxiliary storage device, and these data are then used by subsequent processors. The SPAR data handling utilities use routines to transfer data between the processors and the data base complex. A detailed description of the data base complex organization is presented. A discussion of how these SPAR data handling utilities are used in an application program to perform desired user functions is given with the steps necessary to convert an existing program to a SPAR processor by incorporating these utilities. Finally, a sample SPAR processor is included to illustrate the use of the data handling utilities.

  2. Handling Qualities Implications for Crewed Spacecraft Operations

    NASA Technical Reports Server (NTRS)

    Bailey, Randall E.; Jackson, E. Bruce; Arthur, J. J.

    2012-01-01

    Abstract Handling qualities embody those qualities or characteristics of an aircraft that govern the ease and precision with which a pilot is able to perform the tasks required in support of an aircraft role. These same qualities are as critical, if not more so, in the operation of spacecraft. A research, development, test, and evaluation process was put into effect to identify, understand, and interpret the engineering and human factors principles which govern the pilot-vehicle dynamic system as they pertain to space exploration missions and tasks. Toward this objective, piloted simulations were conducted at the NASA Langley Research Center and Ames Research Center for earth-orbit proximity operations and docking and lunar landing. These works provide broad guidelines for the design of spacecraft to exhibit excellent handling characteristics. In particular, this work demonstrates how handling qualities include much more than just stability and control characteristics of a spacecraft or aircraft. Handling qualities are affected by all aspects of the pilot-vehicle dynamic system, including the motion, visual and aural cues of the vehicle response as the pilot performs the required operation or task. A holistic approach to spacecraft design, including the use of manual control, automatic control, and pilot intervention/supervision is described. The handling qualities implications of design decisions are demonstrated using these pilot-in-the-loop evaluations of docking operations and lunar landings.

  3. Grain Grading and Handling.

    ERIC Educational Resources Information Center

    Rendleman, Matt; Legacy, James

    This publication provides an introduction to grain grading and handling for adult students in vocational and technical education programs. Organized in five chapters, the booklet provides a brief overview of the jobs performed at a grain elevator and of the techniques used to grade grain. The first chapter introduces the grain industry and…

  4. Microforms in Information Handling.

    ERIC Educational Resources Information Center

    Williams, B. J. S.

    In an attempt to identify some of the factors which influence the utility of microforms as a medium for information handling, this report first traces some of the landmarks in the evolution of microforms since their invention in 1893. It next provides a factual account of current microform media and formats. The last section of the report contains…

  5. Testosterone replacement therapy to improve secondary sexual characteristics and body composition without adverse behavioral problems in adult male patients with Prader-Willi syndrome: an observational study.

    PubMed

    Kido, Yasuhiro; Sakazume, Satoru; Abe, Yoshiko; Oto, Yuji; Itabashi, Hisashi; Shiraishi, Masahisa; Yoshino, Atsunori; Tanaka, Yuriko; Obata, Kazuo; Murakami, Nobuyuki; Nagai, Toshiro

    2013-09-01

    Prader-Willi syndrome (PWS), a complex genetic disorder, arises from suppressed expression of paternally inherited imprinted genes on chromosome 15q11-q13. Characteristics include short stature, intellectual disability, behavioral problems, hypogonadism, obesity, and reduced bone and muscle mass. Testosterone replacement (TR) remains controversial due to concerns regarding behavioral problems. To evaluate the effects of TR on secondary sexual characteristics, body composition, and behavior in adult males with PWS, 22 male PWS patients over the age of 16 with behavioral scores of less than grade 4 on the Modified Overt Aggression Scale (MOAS) underwent monthly intramuscular TR (125 mg). Pubertal change, body composition and behavior were evaluated before and after 24 months of therapy. Serum testosterone, LH, and FSH did not change. Increased pubic hair was observed in 16 of 22 patients (72.7%). Percent body fat decreased from 47.55 ± 2.06% to 39.75 ± 1.60% (n = 18) (P = 0.018). Bone mineral density increased from 0.8505 ± 0.0426 g/cm(2) to 0.9035 ± 0.0465 g/cm(2) (n = 18) (P = 0.036), and lean body mass increased from 18093.4 ± 863.0 g to 20312.1 ± 1027.2 g (n = 18) (P = 0.009). The MOAS was unchanged, from 4.5 ± 2.0 at the beginning of the study to 3.0 ± 1.7 at the end of study indicating no increase in aggression. No behavioral problems were observed. Based on this pilot study, TR with 125 mg monthly is a potentially safe and useful intervention for adult males with PWS.

  6. [Cutting and incision tools: the scalpel: handles].

    PubMed

    Illana Esteban, Emilio

    2006-10-01

    In its current version, a scalpel is the best known cutting tool. It comes with a versatile metallic handle, available in a variety of models having differentiated characteristics. With a few simple movements, all models enable you to articulate and extract multiple cutting blades.

  7. Solid waste handling

    SciTech Connect

    Parazin, R.J.

    1995-05-31

    This study presents estimates of the solid radioactive waste quantities that will be generated in the Separations, Low-Level Waste Vitrification and High-Level Waste Vitrification facilities, collectively called the Tank Waste Remediation System Treatment Complex, over the life of these facilities. This study then considers previous estimates from other 200 Area generators and compares alternative methods of handling (segregation, packaging, assaying, shipping, etc.).

  8. Space shuttle handling qualities

    NASA Technical Reports Server (NTRS)

    Gilbert, D. W.

    1985-01-01

    The initial Orbiter handling qualities requirements, their effect on the vehicle design, and how it all turned out through the first six orbital missions are reviewed. Specific areas consisting of hand controller considerations and the wheelie problem are discussed. The requirements for the pitch axis subsonic flight control system are reviewed. Results of recent simulator evaluations to compare the existing system at landing with several other configurations are presented.

  9. Renal phosphate handling: Physiology

    PubMed Central

    Prasad, Narayan; Bhadauria, Dharmendra

    2013-01-01

    Phosphorus is a common anion. It plays an important role in energy generation. Renal phosphate handling is regulated by three organs parathyroid, kidney and bone through feedback loops. These counter regulatory loops also regulate intestinal absorption and thus maintain serum phosphorus concentration in physiologic range. The parathyroid hormone, vitamin D, Fibrogenic growth factor 23 (FGF23) and klotho coreceptor are the key regulators of phosphorus balance in body. PMID:23961477

  10. Uranium hexafluoride handling. Proceedings

    SciTech Connect

    Not Available

    1991-12-31

    The United States Department of Energy, Oak Ridge Field Office, and Martin Marietta Energy Systems, Inc., are co-sponsoring this Second International Conference on Uranium Hexafluoride Handling. The conference is offered as a forum for the exchange of information and concepts regarding the technical and regulatory issues and the safety aspects which relate to the handling of uranium hexafluoride. Through the papers presented here, we attempt not only to share technological advances and lessons learned, but also to demonstrate that we are concerned about the health and safety of our workers and the public, and are good stewards of the environment in which we all work and live. These proceedings are a compilation of the work of many experts in that phase of world-wide industry which comprises the nuclear fuel cycle. Their experience spans the entire range over which uranium hexafluoride is involved in the fuel cycle, from the production of UF{sub 6} from the naturally-occurring oxide to its re-conversion to oxide for reactor fuels. The papers furnish insights into the chemical, physical, and nuclear properties of uranium hexafluoride as they influence its transport, storage, and the design and operation of plant-scale facilities for production, processing, and conversion to oxide. The papers demonstrate, in an industry often cited for its excellent safety record, continuing efforts to further improve safety in all areas of handling uranium hexafluoride. Selected papers were processed separately for inclusion in the Energy Science and Technology Database.

  11. Solid handling valve

    DOEpatents

    Williams, William R.

    1979-01-01

    The present invention is directed to a solids handling valve for use in combination with lock hoppers utilized for conveying pulverized coal to a coal gasifier. The valve comprises a fluid-actuated flow control piston disposed within a housing and provided with a tapered primary seal having a recessed seat on the housing and a radially expandable fluid-actuated secondary seal. The valve seals are highly resistive to corrosion, erosion and abrasion by the solids, liquids, and gases associated with the gasification process so as to minimize valve failure.

  12. Students' Strategies for Exception Handling

    ERIC Educational Resources Information Center

    Rashkovits, Rami; Lavy, Ilana

    2011-01-01

    This study discusses and presents various strategies employed by novice programmers concerning exception handling. The main contributions of this paper are as follows: we provide an analysis tool to measure the level of assimilation of exception handling mechanism; we present and analyse strategies to handle exceptions; we present and analyse…

  13. Handling Qualities Optimization for Rotorcraft Conceptual Design

    NASA Technical Reports Server (NTRS)

    Lawrence, Ben; Theodore, Colin R.; Berger, Tom

    2016-01-01

    Over the past decade, NASA, under a succession of rotary-wing programs has been moving towards coupling multiple discipline analyses in a rigorous consistent manner to evaluate rotorcraft conceptual designs. Handling qualities is one of the component analyses to be included in a future NASA Multidisciplinary Analysis and Optimization framework for conceptual design of VTOL aircraft. Similarly, the future vision for the capability of the Concept Design and Assessment Technology Area (CD&A-TA) of the U.S Army Aviation Development Directorate also includes a handling qualities component. SIMPLI-FLYD is a tool jointly developed by NASA and the U.S. Army to perform modeling and analysis for the assessment of flight dynamics and control aspects of the handling qualities of rotorcraft conceptual designs. An exploration of handling qualities analysis has been carried out using SIMPLI-FLYD in illustrative scenarios of a tiltrotor in forward flight and single-main rotor helicopter at hover. Using SIMPLI-FLYD and the conceptual design tool NDARC integrated into a single process, the effects of variations of design parameters such as tail or rotor size were evaluated in the form of margins to fixed- and rotary-wing handling qualities metrics as well as the vehicle empty weight. The handling qualities design margins are shown to vary across the flight envelope due to both changing flight dynamic and control characteristics and changing handling qualities specification requirements. The current SIMPLI-FLYD capability and future developments are discussed in the context of an overall rotorcraft conceptual design process.

  14. Rotorcraft handling-qualities design criteria development

    NASA Technical Reports Server (NTRS)

    Aiken, Edwin W.; Lebacqz, J. Victor; Chen, Robert T. N.; Key, David L.

    1988-01-01

    Joint NASA/Army efforts at the Ames Research Center to develop rotorcraft handling-qualities design criteria began in earnest in 1975. Notable results were the UH-1H VSTOLAND variable stability helicopter, the VFA-2 camera-and-terrain-board simulator visual system, and the generic helicopter real-time mathematical model, ARMCOP. An initial series of handling-qualities studies was conducted to assess the effects of rotor design parameters, interaxis coupling, and various levels of stability and control augmentation. The ability to conduct in-flight handling-qualities research was enhanced by the development of the NASA/Army CH-47 variable-stability helicopter. Research programs conducted using this vehicle include vertical-response investigations, hover augmentation systems, and the effects of control-force characteristics. The handling-qualities data base was judged to be sufficient to allow an update of the military helicopter handling-qualities specification, MIL-H-8501. These efforts, including not only the in-house experimental work but also contracted research and collaborative programs performed under the auspices of various international agreements. The report concludes by reviewing the topics that are currently most in need of work, and the plans for addressing these topics.

  15. Adverse Outcomes in Group Psychotherapy

    PubMed Central

    Roback, Howard B.

    2000-01-01

    Group forms of therapy have been growing at a rapid rate, in part because of their documented effectiveness and economic considerations such as managed care. It is therefore becoming increasingly important to assess the psychological risks of these interventions. The author provides an overview of the published literature and conference presentations on negative effects in adult outpatient groups. Although much of the literature on adverse outcomes in group therapy focuses on single risk factors (e.g., negative leader, group process, or patient characteristics), the author argues that an interactional model should be encouraged. Means of reducing casualties are also discussed, as well as methodological issues and research directions. PMID:10896735

  16. Handling Procedures of Vegetable Crops

    NASA Technical Reports Server (NTRS)

    Perchonok, Michele; French, Stephen J.

    2004-01-01

    The National Aeronautics and Space Administration (NASA) is working towards future long duration manned space flights beyond low earth orbit. The duration of these missions may be as long as 2.5 years and will likely include a stay on a lunar or planetary surface. The primary goal of the Advanced Food System in these long duration exploratory missions is to provide the crew with a palatable, nutritious, and safe food system while minimizing volume, mass, and waste. Vegetable crops can provide the crew with added nutrition and variety. These crops do not require any cooking or food processing prior to consumption. The vegetable crops, unlike prepackaged foods, will provide bright colors, textures (crispy), and fresh aromas. Ten vegetable crops have been identified for possible use in long duration missions. They are lettuce, spinach, carrot, tomato, green onion, radish, bell pepper, strawberries, fresh herbs, and cabbage. Whether these crops are grown on a transit vehicle (e.g., International Space Station) or on the lunar or planetary surface, it will be necessary to determine how to safely handle the vegetables while maintaining acceptability. Since hydrogen peroxide degrades into water and oxygen and is generally recognized as safe (GRAS), hydrogen peroxide has been recommended as the sanitizer. The objective of th is research is to determine the required effective concentration of hydrogen peroxide. In addition, it will be determined whether the use of hydrogen peroxide, although a viable sanitizer, adversely affects the quality of the vegetables. Vegetables will be dipped in 1 % hydrogen peroxide, 3% hydrogen peroxide, or 5% hydrogen peroxide. Treated produce and controls will be stored in plastic bags at 5 C for up to 14 days. Sensory, color, texture, and total plate count will be measured. The effect on several vegetables including lettuce, radish, tomato and strawberries has been completed. Although each vegetable reacts to hydrogen peroxide differently, the

  17. Bulk material handling system

    DOEpatents

    Kleysteuber, William K.; Mayercheck, William D.

    1979-01-01

    This disclosure relates to a bulk material handling system particularly adapted for underground mining and includes a monorail supported overhead and carrying a plurality of conveyors each having input and output end portions with the output end portion of a first of the conveyors positioned above an input end portion of a second of the conveyors, a device for imparting motion to the conveyors to move the material from the input end portions toward the output end portions thereof, a device for supporting at least one of the input and output end portions of the first and second conveyors from the monorail, and the supporting device including a plurality of trolleys rollingly supported by the monorail whereby the conveyors can be readily moved therealong.

  18. Platelets: handle with care.

    PubMed

    Thomas, S

    2016-10-01

    Platelets are delicate cells that require careful handling between collection, preparation and transfusion. This review addresses practical questions relating to platelet concentration, resting time after collection, total time and number of periods without agitation and temperature. The bags in which platelets are stored are made from gas-permeable plastic to allow sufficient oxygen for the platelets to maintain aerobic respiration. Manufacturers have assigned limits for platelet content and concentration, and these must not be exceeded. There is no strong evidence for or against the resting of platelets post-collection and pre-agitation, but platelets should not be over-wrapped during this period as this compromises gas exchange; a short rest period of up to 1 h may allow the separation of minor aggregates. It is necessary to transport platelet concentrates (e.g. from manufacturing site to hospital), but these periods without gas exchange must be limited to avoid excessive damage to the platelets. Current data support a total of 24 h of transportation per component but with no individual period lasting more than 8 h. Platelets need to be stored at 20-24 °C based on evidence that colder storage leads to irreversible changes on the platelet membrane, resulting in phagocytosis of the platelets following transfusion. Storage at warmer temperatures may lead to an increase in bacterial risk. On the basis of this review, the UK Guidelines for Blood Transfusion Services have been updated to ensure that platelets are handled in the most appropriate way to ensure that efficacious components are provided for patients.

  19. Scientists Trace Adversity's Toll

    ERIC Educational Resources Information Center

    Sparks, Sarah D.

    2012-01-01

    The stress of a spelling bee or a challenging science project can enhance a student's focus and promote learning. But the stress of a dysfunctional or unstable home life can poison a child's cognitive ability for a lifetime, according to new research. Those studies show that stress forms the link between childhood adversity and poor academic…

  20. REMOTE HANDLING ARRANGEMENTS

    DOEpatents

    Ginns, D.W.

    1958-04-01

    A means for handling remotely a sample pellet to be irradiated in a nuclear reactor is proposed. It is comprised essentially of an inlet tube extending through the outer shield of the reactor and being inclined so that its outer end is at a higher elevation than its inner end, an outlet tube extending through the outer shield being inclined so that its inner end is at a higher elevation than its outer end, the inner ends of these two tubes being interconnected, and a straight tube extending through the outer shield and into the reactor core between the inlet and outlet tubes and passing through the juncture of said inner ends. A rod-like member is rotatably and slidely operated within the central straight tube and has a receptacle on its inner end for receiving a sample pellet from the inlet tube. The rod member is operated to pick up a sample pellet from the inlet tube, carry the sample pellet into the irradiating position within the core, and return to the receiving position where it is rotated to dump the irradiated pellet into the outlet tube by which it is conveyed by gravity to the outside of the reactor. Stop members are provided in the inlet tube, and electrical operating devices are provided to control the sequence of the operation automatically.

  1. Childhood adversity: a review of measurement instruments.

    PubMed

    Burgermeister, Diane

    2007-01-01

    Measurement instruments are needed to stimulate research on the long-term outcomes of childhood adversity. Therefore, the purpose of this review was to locate, describe, and assess instruments to measure retrospective perceptions of childhood adversity. An electronic search of instruments was conducted using a combination of keywords that included child maltreatment, child trauma, and childhood stressful events. Nine instruments were located and described according to format, definition of childhood adversity as measured by the instrument, characteristics of the sample used in development and testing, reliability and validity evidence, and feasibility for use. Six out of the nine instruments were suitable for investigators who require a comprehensive measure of childhood adversity. Corroboration with independent sources and use of randomized samples are needed to improve upon reports of validity.

  2. Handling qualities effects of display latency

    NASA Technical Reports Server (NTRS)

    King, David W.

    1993-01-01

    Display latency is the time delay between aircraft response and the corresponding response of the cockpit displays. Currently, there is no explicit specification for allowable display lags to ensure acceptable aircraft handling qualities in instrument flight conditions. This paper examines the handling qualities effects of display latency between 70 and 400 milliseconds for precision instrument flight tasks of the V-22 Tiltrotor aircraft. Display delay effects on the pilot control loop are analytically predicted through a second order pilot crossover model of the V-22 lateral axis, and handling qualities trends are evaluated through a series of fixed-base piloted simulation tests. The results show that the effects of display latency for flight path tracking tasks are driven by the stability characteristics of the attitude control loop. The data indicate that the loss of control damping due to latency can be simply predicted from knowledge of the aircraft's stability margins, control system lags, and required control bandwidths. Based on the relationship between attitude control damping and handling qualities ratings, latency design guidelines are presented. In addition, this paper presents a design philosophy, supported by simulation data, for using flight director display augmentation to suppress the effects of display latency for delays up to 300 milliseconds.

  3. Adverse drug reactions.

    PubMed

    O'Reilly-Foley, Georgina

    2017-04-05

    What was the nature of the CPD activity, practice-related feedback and/or event and/or experience in your practice? The CPD article defined the different types of adverse drug reactions (ADRs) and explored when they can occur. It emphasised the importance of being knowledgeable about medications, considering patient safety when patients are taking medications, being alert to the possibility of ADRs, and recognising and responding to suspected ADRs.

  4. Fluid handling equipment: A compilation

    NASA Technical Reports Server (NTRS)

    1976-01-01

    Devices and techniques used in fluid-handling and vacuum systems are described. Section 1 presents several articles on fluid lines and tubing. Section 2 describes a number of components such as valves, filters, and regulators. The last section contains descriptions of a number of innovative fluid-handling systems.

  5. Effect of winglets on performance and handling qualities of general aviation aircraft

    NASA Technical Reports Server (NTRS)

    Van Dam, C. P.; Holmes, B. J.; Pitts, C.

    1980-01-01

    Recent flight and wind tunnel evaluations of winglets mounted on general aviation airplanes have shown improvements in cruise fuel efficiency, and climbing and turning performance. Some of these analyses have also uncovered various effects of winglets on airplane handling qualities. Retrofitting an airplane with winglets can result in reduced cross wind take-off and landing capabilities. Also, winglets can have a detrimental effect on the lateral directional response characteristics of aircraft which have a moderate to high level of adverse yaw due to aileron. Introduction of an aileron-rudder-interconnect, and reduction of the effective dihedral by canting-in of the winglets, or addition of a lower winglet can eliminate these flying quality problems.

  6. Adverse effects of cannabis.

    PubMed

    2011-01-01

    Cannabis, Cannabis sativa L., is used to produce a resin that contains high levels of cannabinoids, particularly delta9-tetrahydrocannabinol (THC), which are psychoactive substances. Although cannabis use is illegal in France and in many other countries, it is widely used for its relaxing or euphoric effects, especially by adolescents and young adults. What are the adverse effects of cannabis on health? During consumption? And in the long term? Does cannabis predispose users to the development of psychotic disorders? To answer these questions, we reviewed the available evidence using the standard Prescrire methodology. The long-term adverse effects of cannabis are difficult to evaluate. Since and associated substances, with or without the user's knowledge. Tobacco and alcohol consumption, and particular lifestyles and behaviours are often associated with cannabis use. Some traits predispose individuals to the use of psychoactive substances in general. The effects of cannabis are dosedependent.The most frequently report-ed adverse effects are mental slowness, impaired reaction times, and sometimes accentuation of anxiety. Serious psychological disorders have been reported with high levels of intoxication. The relationship between poor school performance and early, regular, and frequent cannabis use seems to be a vicious circle, in which each sustains the other. Many studies have focused on the long-term effects of cannabis on memory, but their results have been inconclusive. There do not * About fifteen longitudinal cohort studies that examined the influence of cannabis on depressive thoughts or suicidal ideation have yielded conflicting results and are inconclusive. Several longitudinal cohort studies have shown a statistical association between psychotic illness and self-reported cannabis use. However, the results are difficult to interpret due to methodological problems, particularly the unknown reliability of self-reported data. It has not been possible to

  7. Adverse reactions to vaccines.

    PubMed

    Martin, Bryan L; Nelson, Michael R; Hershey, Joyce N; Engler, Renata J M

    2003-06-01

    (The opinions or assertions contained herein are the private views of the authors and are not to be construed as official or as reflecting the views of the Department of the Army or the Department of Defense.) Immunization healthcare is becoming increasingly complex as the number and types of vaccines have continued to expand. Like all prescription drugs, vaccines may be associated with adverse events. The majority of these reactions are self-limited and not associated with prolonged disability. The media, Internet and public advocacy groups have focused on potentially serious vaccine-associated adverse events with questions raised about causal linkages to increasing frequencies of diseases such as autism and asthma. Despite a lack of evidence of a causal relationship to a variety of vaccine safety concerns, including extensive reviews by the Institute of Medicine, questions regarding vaccine safety continue to threaten the success of immunization programs. Risk communication arid individual risk assessment is further challenged by the public health success of vaccine programs creating the perception that certain vaccines are no longer necessary or justified because of the rare reaction risk. There is a need for improved understanding of true vaccine contraindications and precautions as well as host factors and disease threat in order to develop a patient specific balanced risk communication intervention. When they occur, vaccine related adverse events must be treated, documented and reported through the VAERS system. The increasing complexity of vaccination health care has led the Center of Disease Control and Prevention (CDC) to identify Vaccine Safety Assessment and Evaluation as a potential new specialty.

  8. Information Handling is the Problem

    NASA Technical Reports Server (NTRS)

    Malin, Jane T.

    2001-01-01

    This slide presentation reviews the concerns surrounding the automation of information handling. There are two types of decision support software that supports most Space Station Flight Controllers. one is very simple, and the other is very complex. A middle ground is sought. This is the reason for the Human Centered Autonomous and Assistant Systems Testbed (HCAAST) Project. The aim is to study flight controllers at work, and in the bigger picture, with particular attention to how they handle information and how coordination of multiple teams is performed. The focus of the project is on intelligent assistants to assist in handling information for the flight controllers.

  9. HAND TRUCK FOR HANDLING EQUIPMENT

    DOEpatents

    King, D.W.

    1959-02-24

    A truck is described for the handling of large and relatively heavy pieces of equipment and particularly for the handling of ion source units for use in calutrons. The truck includes a chassis and a frame pivoted to the chassis so as to be operable to swing in the manner of a boom. The frame has spaced members so arranged that the device to be handled can be suspended between or passed between these spaced members and also rotated with respect to the frame when the device is secured to the spaced members.

  10. Incorporating Handling Qualities Analysis into Rotorcraft Conceptual Design

    NASA Technical Reports Server (NTRS)

    Lawrence, Ben

    2014-01-01

    This paper describes the initial development of a framework to incorporate handling qualities analyses into a rotorcraft conceptual design process. In particular, the paper describes how rotorcraft conceptual design level data can be used to generate flight dynamics models for handling qualities analyses. Also, methods are described that couple a basic stability augmentation system to the rotorcraft flight dynamics model to extend analysis to beyond that of the bare airframe. A methodology for calculating the handling qualities characteristics of the flight dynamics models and for comparing the results to ADS-33E criteria is described. Preliminary results from the application of the handling qualities analysis for variations in key rotorcraft design parameters of main rotor radius, blade chord, hub stiffness and flap moment of inertia are shown. Varying relationships, with counteracting trends for different handling qualities criteria and different flight speeds are exhibited, with the action of the control system playing a complex part in the outcomes. Overall, the paper demonstrates how a broad array of technical issues across flight dynamics stability and control, simulation and modeling, control law design and handling qualities testing and evaluation had to be confronted to implement even a moderately comprehensive handling qualities analysis of relatively low fidelity models. A key outstanding issue is to how to 'close the loop' with an overall design process, and options for the exploration of how to feedback handling qualities results to a conceptual design process are proposed for future work.

  11. Metabolic and adverse effects of diuretics.

    PubMed

    Wilcox, C S

    1999-11-01

    Diuretics are among the most frequently prescribed drugs. They enjoy a very high clinical reputation for safety and efficacy. However, more than 3 decades of clinical investigation have disclosed a number of abnormalities in fluid electrolyte handling, metabolism, and other adverse effects that can complicate therapy with diuretic drugs. Some of these complications are a direct extension of the wanted action of the drug. These include extracellular fluid volume depletion, associated orthostatic hypotension, and prerenal azotemia. Others are not a direct action of the diuretic, but can be explained as an intranephronal compensation to the diuretic action. These include hypokalemia, in part to increased potassium secretion secondary to the enhanced tubular fluid flow and aldosterone secretion induced by diuretic administration. Metabolic abnormalities are usually mild. Hyperglycemia and carbohydrate intolerance have been related to diuretic-induced hypokalemia, which inhibits insulin secretion by the beta cells, and reductions in extracellular fluid volume and cardiac output. This is compounded by increases in catecholamines from sympathetic nerve activity which decrease peripheral glucose utilization. A mild increase in serum cholesterol concentration is seen frequently during initiation of diuretic therapy, but during steady state therapy after 6 to 12 months, values usually return to baseline. Knowledge of the more common adverse effects induced by diuretics helps the physician in predicting patients at risk and taking effective steps to anticipate or treat adverse responses.

  12. Tritium handling in vacuum systems

    SciTech Connect

    Gill, J.T.; Coffin, D.O.

    1986-10-01

    This report provides a course in Tritium handling in vacuum systems. Topics presented are: Properties of Tritium; Tritium compatibility of materials; Tritium-compatible vacuum equipment; and Tritium waste treatment.

  13. Dazomet Fumigant Safe Handling Guide

    EPA Pesticide Factsheets

    Dazomet is the active ingredient in Basamid G soil fumigant pesticide. Wear personal protective equipment such as respirators when handling Basamid granules or making an application, mitigate exposures, and recognize signs of vapor inhalation.

  14. Ergonomic material-handling device

    DOEpatents

    Barsnick, Lance E.; Zalk, David M.; Perry, Catherine M.; Biggs, Terry; Tageson, Robert E.

    2004-08-24

    A hand-held ergonomic material-handling device capable of moving heavy objects, such as large waste containers and other large objects requiring mechanical assistance. The ergonomic material-handling device can be used with neutral postures of the back, shoulders, wrists and knees, thereby reducing potential injury to the user. The device involves two key features: 1) gives the user the ability to adjust the height of the handles of the device to ergonomically fit the needs of the user's back, wrists and shoulders; and 2) has a rounded handlebar shape, as well as the size and configuration of the handles which keep the user's wrists in a neutral posture during manipulation of the device.

  15. Air handling units for hospitals.

    PubMed

    Amoroso, V; Gjestvang, R

    1989-10-01

    Air handling units should provide proper quality and conditioned air to various hospital areas. Unit capacity should be able to meet limited space functionality or load changes as well as any smoke control requirements. System components should be readily accessible and appropriate for spaces served. In summary, engineers should consider the following: Environmental design criteria for area being served Components desired Unit type required Economic issues affecting design. Using this approach, design engineers can design hospital air handling units methodically and logically.

  16. Material Handling in Dry Docks.

    DTIC Science & Technology

    1981-11-01

    final report of work completed under Naval Sea Systems Command Work Request N0002470WR9666 to identify segments of drydock material handling which may... segment of drydock/shipboard material handling which may be improved to achieve reductions in manhours and overhaul costs for typical availabilities...IAN’ Earthquake criteria, regardless of geograp tical area, which can eliminate anywhere from 1/3 to 1/2 of the blocks required and meet an additional

  17. An Investigation of Large Aircraft Handling Qualities

    NASA Astrophysics Data System (ADS)

    Joyce, Richard D.

    An analytical technique for investigating transport aircraft handling qualities is exercised in a study using models of two such vehicles, a Boeing 747 and Lockheed C-5A. Two flight conditions are employed for climb and directional tasks, and a third included for a flare task. The analysis technique is based upon a "structural model" of the human pilot developed by Hess. The associated analysis procedure has been discussed previously in the literature, but centered almost exclusively on the characteristics of high-performance fighter aircraft. The handling qualities rating level (HQRL) and pilot induced oscillation tendencies rating level (PIORL) are predicted for nominal configurations of the aircraft and for "damaged" configurations where actuator rate limits are introduced as nonlinearites. It is demonstrated that the analysis can accommodate nonlinear pilot/vehicle behavior and do so in the context of specific flight tasks, yielding estimates of handling qualities, pilot-induced oscillation tendencies and upper limits of task performance. A brief human-in-the-loop tracking study was performed to provide a limited validation of the pilot model employed.

  18. Factors influencing aircraft ground handling performance

    NASA Technical Reports Server (NTRS)

    Yager, T. J.

    1983-01-01

    Problems associated with aircraft ground handling operations on wet runways are discussed and major factors which influence tire/runway braking and cornering traction capability are identified including runway characteristics, tire hydroplaning, brake system anomalies, and pilot inputs. Research results from tests with instrumented ground vehicles and aircraft, and aircraft wet runway accident investigation are summarized to indicate the effects of different aircraft, tire, and runway parameters. Several promising means are described for improving tire/runway water drainage capability, brake system efficiency, and pilot training to help optimize aircraft traction performance on wet runways.

  19. Improvement of storage, handling, and transportability of fine coal. Quarterly technical progress report number 8, October 1--December 31, 1995

    SciTech Connect

    1996-03-15

    The Mulled Coal process was developed as a means of overcoming the adverse handling characteristics of wet fine coal without thermal drying. The process involves the addition of a low cost, harmless reagent to wet fine coal using off-the-shelf mixing equipment. Based on laboratory- and bench-scale testing, Mulled coal can be stored, shipped, and burned without causing any of the plugging, pasting, carryback and freezing problems normally associated with wet coal. On the other hand, Mulled Coal does not cause the fugitive and airborne dust problems normally associated with thermally dried coal. The objectives of this project are to demonstrate that: the Mulled Coal process, which has been proved to work on a wide range of wet fine coals at bench scale, will work equally well on a continuous basis, producing consistent quality, and at a convincing rate of production in a commercial coal preparation plant; the wet product from a fine coal cleaning circuit can be converted to a solid fuel form for ease of handling and cost savings in storage and rail car transportation; and a wet fine coal product thus converted to a solid fuel form, can be stored, shipped, and burned with conventional fuel handling, transportation, and combustion systems.

  20. Telithromycin: review of adverse effects.

    PubMed

    2014-11-01

    Telithromycin is a macrolide antibiotic that has been marketed since the early 2000s. It has not been shown to be more effective against any bacteria than other macrolide antibiotics. Its antibacterial activity is in no way remarkable. In early 2014, we reviewed its adverse effect profile using data from periodic safety update reports, drug regulatory agencies, and detailed published case reports. In addition to the adverse effect profile telithromycin shares with the other macrolides, it provokes several specific adverse effects: visual disturbances due to impaired accommodation; taste and smell disorders; severe liver damage; worsening of myasthenia gravis; rhabdomyolysis; and loss of consciousness. Prolongation of the QT interval with standard oral doses is a worrisome adverse effect. In practice, it is better not to use telithromycin as it exposes patients to disproportionate, serious adverse effects. When treatment with a macrolide antibiotic appears necessary, it is prudent to choose a different macrolide, such as spiramycin or azithromycin, which have fewer adverse effects.

  1. 7 CFR 906.7 - Handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Handle. 906.7 Section 906.7 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and... GRANDE VALLEY IN TEXAS Order Regulating Handling Definitions § 906.7 Handle. Handle or ship means...

  2. 7 CFR 959.7 - Handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Handle. 959.7 Section 959.7 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and... Handling Definitions § 959.7 Handle. Handle or ship means to package, load, sell, transport, or in any...

  3. 7 CFR 946.7 - Handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Handle. 946.7 Section 946.7 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and... Regulating Handling Definitions § 946.7 Handle. Handle is synonymous with ship and means to transport,...

  4. 7 CFR 958.7 - Handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Handle. 958.7 Section 958.7 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and... IN IDAHO, AND MALHEUR COUNTY, OREGON Order Regulating Handling Definitions § 958.7 Handle. Handle...

  5. Portable vacuum object handling device

    DOEpatents

    Anderson, Gordon H.

    1983-08-09

    The disclosure relates to a portable device adapted to handle objects which are not to be touched by hand. A piston and bore wall form a vacuum chamber communicating with an adaptor sealably engageable with an object to be lifted. The piston is manually moved and set to establish vacuum. A valve is manually actuatable to apply the vacuum to lift the object.

  6. Relationships between the renal handling of DMPS and DMSA and the renal handling of mercury.

    PubMed

    Zalups, Rudolfs K; Bridges, Christy C

    2012-09-17

    Within the body of this review, we provide updates on the mechanisms involved in the renal handling mercury (Hg) and the vicinal dithiol complexing/chelating agents, 2,3-bis(sulfanyl)propane-1-sulfonate (known formerly as 2,3-dimercaptopropane-1-sulfonate, DMPS) and meso-2,3-bis(sulfanyl)succinate (known formerly as meso-2,3-dimercaptosuccinate, DMSA), with a focus on the therapeutic effects of these dithiols following exposure to different chemical forms of Hg. We begin by reviewing briefly some of the chemical properties of Hg, with an emphasis on the high bonding affinity between mercuric ions and reduced sulfur atoms, principally those contained in protein and nonprotein thiols. A discussion is provided on the current body of knowledge pertaining to the handling of various mercuric species within the kidneys, focusing on the primary cellular targets that take up and are affected adversely by these species of Hg, namely, proximal tubular epithelial cells. Subsequently, we provide a brief update on the current knowledge on the handling of DMPS and DMSA in the kidneys. In particular, parallels are drawn between the mechanisms participating in the uptake of various thiol S-conjugates of Hg in proximal tubular cells and mechanisms by which DMPS and DMSA gain entry into these target epithelial cells. Finally, we discuss factors that permit DMPS and DMSA to bind intracellular mercuric ions and mechanisms transporting DMPS and DMSA S-conjugates of Hg out of proximal tubular epithelial cells into the luminal compartment of the nephron, and promoting urinary excretion.

  7. Adverse Reactions to Hallucinogenic Drugs.

    ERIC Educational Resources Information Center

    Meyer, Roger E. , Ed.

    This reports a conference of psychologists, psychiatrists, geneticists and others concerned with the biological and psychological effects of lysergic acid diethylamide and other hallucinogenic drugs. Clinical data are presented on adverse drug reactions. The difficulty of determining the causes of adverse reactions is discussed, as are different…

  8. Neonatal handling induces deficits in infant mother preference and adult partner preference.

    PubMed

    Raineki, Charlis; Lutz, Maiara Lenise; Sebben, Vanise; Ribeiro, Rosane Aparecida; Lucion, Aldo Bolten

    2013-07-01

    Neonatal handling is an experimental procedure used to understand how early-life adversity can negatively affect neurobehavioral development and place animals on a pathway to pathology. Decreased preference for the maternal odor during infancy is one of many behavioral deficits induced by neonatal handling. Here, we hypothesize that deficits in maternal odor preference may interfere with partner preference in the adult. To test this hypothesis, we assessed infant maternal odor preference and adult partner preference in different reproductive stages in both male and female rats that received neonatal handling. Our results indicate that only neonatally handled females present deficits in maternal odor preference during infancy, but both male and females present deficits in adult partner preference. However, sexual experience was effective in rescuing partner preference deficits in males. These results indicate that, considering infant and adult social interactions, females are more susceptible to the effects of neonatal handling than males.

  9. 7 CFR 322.21 - Post-entry handling.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 5 2010-01-01 2010-01-01 false Post-entry handling. 322.21 Section 322.21 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE... reproduction with no evidence of nonindigenous parasites or pathogens or of undesirable characteristics,...

  10. AUTOMATED LITERATURE PROCESSING HANDLING AND ANALYSIS SYSTEM--FIRST GENERATION.

    ERIC Educational Resources Information Center

    Redstone Scientific Information Center, Redstone Arsenal, AL.

    THE REPORT PRESENTS A SUMMARY OF THE DEVELOPMENT AND THE CHARACTERISTICS OF THE FIRST GENERATION OF THE AUTOMATED LITERATURE PROCESSING, HANDLING AND ANALYSIS (ALPHA-1) SYSTEM. DESCRIPTIONS OF THE COMPUTER TECHNOLOGY OF ALPHA-1 AND THE USE OF THIS AUTOMATED LIBRARY TECHNIQUE ARE PRESENTED. EACH OF THE SUBSYSTEMS AND MODULES NOW IN OPERATION ARE…

  11. The CDF data handling system

    SciTech Connect

    Dmitry O. Litvintsev

    2003-11-05

    The Collider Detector at Fermilab (CDF) records proton-antiproton collisions at center of mass energy of 2.0 TeV at the Tevatron collider. A new collider run, Run II, of the Tevatron started in April 2001. Increased luminosity will result in about 1 PB of data recorded on tapes in the next two years. Currently the CDF experiment has about 260 TB of data stored on tapes. This amount includes raw and reconstructed data and their derivatives. The data storage and retrieval are managed by the CDF Data Handling (DH) system. This system has been designed to accommodate the increased demands of the Run II environment and has proven robust and reliable in providing reliable flow of data from the detector to the end user. This paper gives an overview of the CDF Run II Data Handling system which has evolved significantly over the course of this year. An outline of the future direction of the system is given.

  12. Understanding adverse events: human factors.

    PubMed Central

    Reason, J

    1995-01-01

    (1) Human rather than technical failures now represent the greatest threat to complex and potentially hazardous systems. This includes healthcare systems. (2) Managing the human risks will never be 100% effective. Human fallibility can be moderated, but it cannot be eliminated. (3) Different error types have different underlying mechanisms, occur in different parts of the organisation, and require different methods of risk management. The basic distinctions are between: Slips, lapses, trips, and fumbles (execution failures) and mistakes (planning or problem solving failures). Mistakes are divided into rule based mistakes and knowledge based mistakes. Errors (information-handling problems) and violations (motivational problems) Active versus latent failures. Active failures are committed by those in direct contact with the patient, latent failures arise in organisational and managerial spheres and their adverse effects may take a long time to become evident. (4) Safety significant errors occur at all levels of the system, not just at the sharp end. Decisions made in the upper echelons of the organisation create the conditions in the workplace that subsequently promote individual errors and violations. Latent failures are present long before an accident and are hence prime candidates for principled risk management. (5) Measures that involve sanctions and exhortations (that is, moralistic measures directed to those at the sharp end) have only very limited effectiveness, especially so in the case of highly trained professionals. (6) Human factors problems are a product of a chain of causes in which the individual psychological factors (that is, momentary inattention, forgetting, etc) are the last and least manageable links. Attentional "capture" (preoccupation or distraction) is a necessary condition for the commission of slips and lapses. Yet, its occurrence is almost impossible to predict or control effectively. The same is true of the factors associated with

  13. Portable vacuum object handling device

    DOEpatents

    Anderson, G.H.

    1983-08-09

    The disclosure relates to a portable device adapted to handle objects which are not to be touched by hand. A piston and bore wall form a vacuum chamber communicating with an adaptor sealably engageable with an object to be lifted. The piston is manually moved and set to establish vacuum. A valve is manually actuatable to apply the vacuum to lift the object. 1 fig.

  14. A Look at Handling Qualities of Canard Configurations

    NASA Technical Reports Server (NTRS)

    Anderson, Seth B.

    1986-01-01

    The first human-powered flight was achieved by a canard-configured aircraft (Wright Brothers). Although other canard concepts were flown with varying degrees of success over the years, the tail-aft configuration has dominated the aircraft market for both military and civil use. Reviewed are the development of several canard aircraft with emphasis on stability and control, handling qualities, and operating problems. The results show that early canard concepts suffered adversely in flight behavior because of a lack of understanding of the sensitivities of these concepts to basic stability and control principles. Modern canard designs have been made competitive with tail-aft configurations by using appropriate handling qualities design criteria.

  15. Improvement of storage, handling and transportability of fine coal. Quarterly technical progress report No. 3, July 1, 1994--September 30, 1994

    SciTech Connect

    1996-08-16

    The Mulled Coal process was developed as a means of overcoming the adverse handling characteristics of wet fine coal without thermal drying. The process involves the addition of a low cost, harmless reagent to wet fine coal using off-the-shelf mixing equipment. The objectives of this project are to demonstrate that: The Mulled Coal process, which has been proven to work on a wide range of wet fine coals at bench scale, will work equally well on a continuous basis, producing consistent quality at a convincing rate of production in a commercial coal preparation plant. The wet product from a fine coal cleaning circuit can be converted to a solid fuel form for ease of handling and cost savings in storage and rail car transportation. A wet fine coal product thus converted to a solid fuel form, can be stored, shipped, and burned with conventional fuel handling, transportation, and combustion systems. During this third quarter of the contract period, activities were underway under Tasks 2 and 3. Sufficient characterization of the feedstock coal options at the Chetopa Plant was conducted and mulling characteristics determined to enable a decision to be made regarding the feedstock selection. It was decided that the froth concentrate will be the feedstock wet fine coal used for the project. On that basis, activities in the areas of design and procurement were initiated.

  16. Orion Entry Handling Qualities Assessments

    NASA Technical Reports Server (NTRS)

    Bihari, B.; Tiggers, M.; Strahan, A.; Gonzalez, R.; Sullivan, K.; Stephens, J. P.; Hart, J.; Law, H., III; Bilimoria, K.; Bailey, R.

    2011-01-01

    The Orion Command Module (CM) is a capsule designed to bring crew back from the International Space Station (ISS), the moon and beyond. The atmospheric entry portion of the flight is deigned to be flown in autopilot mode for nominal situations. However, there exists the possibility for the crew to take over manual control in off-nominal situations. In these instances, the spacecraft must meet specific handling qualities criteria. To address these criteria two separate assessments of the Orion CM s entry Handling Qualities (HQ) were conducted at NASA s Johnson Space Center (JSC) using the Cooper-Harper scale (Cooper & Harper, 1969). These assessments were conducted in the summers of 2008 and 2010 using the Advanced NASA Technology Architecture for Exploration Studies (ANTARES) six degree of freedom, high fidelity Guidance, Navigation, and Control (GN&C) simulation. This paper will address the specifics of the handling qualities criteria, the vehicle configuration, the scenarios flown, the simulation background and setup, crew interfaces and displays, piloting techniques, ratings and crew comments, pre- and post-fight briefings, lessons learned and changes made to improve the overall system performance. The data collection tools, methods, data reduction and output reports will also be discussed. The objective of the 2008 entry HQ assessment was to evaluate the handling qualities of the CM during a lunar skip return. A lunar skip entry case was selected because it was considered the most demanding of all bank control scenarios. Even though skip entry is not planned to be flown manually, it was hypothesized that if a pilot could fly the harder skip entry case, then they could also fly a simpler loads managed or ballistic (constant bank rate command) entry scenario. In addition, with the evaluation set-up of multiple tasks within the entry case, handling qualities ratings collected in the evaluation could be used to assess other scenarios such as the constant bank angle

  17. Cutaneous adverse reactions to lenalidomide.

    PubMed

    Imbesi, S; Allegra, A; Calapai, G; Musolino, C; Gangemi, S

    2015-01-01

    Lenalidomide is an immunomodulatory drug (IMiD) used principally in the treatment of multiple myeloma (MM), myelodysplastic syndromes (MS) and amyloidosis. Adverse reactions related to lenalidomide include myelosuppression (mainly neutropenia but also thrombocytopenia), gastrointestinal problems, skin eruption, atrial fibrillation and asthenia, decreased peripheral blood stem cell yield during stem cell collection, venous thromboembolism, and secondary malignances. In this review we focused our attention on the cutaneous adverse reactions to lenalidomide.

  18. 7 CFR 1205.312 - Handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE COTTON RESEARCH AND PROMOTION Cotton Research and Promotion Order Definitions § 1205.312 Handle. Handle means to harvest, gin,...

  19. Reverse Engineering Adverse Outcome Pathways

    SciTech Connect

    Perkins, Edward; Chipman, J.K.; Edwards, Stephen; Habib, Tanwir; Falciani, Francesco; Taylor, Ronald C.; Van Aggelen, Graham; Vulpe, Chris; Antczak, Philipp; Loguinov, Alexandre

    2011-01-30

    The toxicological effects of many stressors are mediated through unknown, or poorly characterized, mechanisms of action. We describe the application of reverse engineering complex interaction networks from high dimensional omics data (gene, protein, metabolic, signaling) to characterize adverse outcome pathways (AOPs) for chemicals that disrupt the hypothalamus-pituitary-gonadal endocrine axis in fathead minnows. Gene expression changes in fathead minnow ovaries in response to 7 different chemicals, over different times, doses, and in vivo versus in vitro conditions were captured in a large data set of 868 arrays. We examined potential AOPs of the antiandrogen flutamide using two mutual information theory methods, ARACNE and CLR to infer gene regulatory networks and potential adverse outcome pathways. Representative networks from these studies were used to predict a network path from stressor to adverse outcome as a candidate AOP. The relationship of individual chemicals to an adverse outcome can be determined by following perturbations through the network in response to chemical treatment leading to the nodes associated with the adverse outcome. Identification of candidate pathways allows for formation of testable hypotheses about key biologic processes, biomarkers or alternative endpoints, which could be used to monitor an adverse outcome pathway. Finally, we identify the unique challenges facing the application of this approach in ecotoxicology, and attempt to provide a road map for the utilization of these tools. Key Words: mechanism of action, toxicology, microarray, network inference

  20. 7 CFR 981.16 - To handle.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE ALMONDS GROWN IN CALIFORNIA Order Regulating Handling Definitions § 981.16 To handle. To handle means to use almonds commercially of own production or to sell, consign, transport, ship (except as a common carrier of almonds owned by another)...

  1. 7 CFR 981.16 - To handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE ALMONDS GROWN IN CALIFORNIA Order Regulating Handling Definitions § 981.16 To handle. To handle means to use almonds commercially of own production or to sell, consign, transport, ship (except as a common carrier of almonds owned by another)...

  2. 7 CFR 981.16 - To handle.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE ALMONDS GROWN IN CALIFORNIA Order Regulating Handling Definitions § 981.16 To handle. To handle means to use almonds commercially of own production or to sell, consign, transport, ship (except as a common carrier of almonds owned by another)...

  3. 7 CFR 981.16 - To handle.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE ALMONDS GROWN IN CALIFORNIA Order Regulating Handling Definitions § 981.16 To handle. To handle means to use almonds commercially of own production or to sell, consign, transport, ship (except as a common carrier of almonds owned by another)...

  4. 7 CFR 981.16 - To handle.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE ALMONDS GROWN IN CALIFORNIA Order Regulating Handling Definitions § 981.16 To handle. To handle means to use almonds commercially of own production or to sell, consign, transport, ship (except as a common carrier of almonds owned by another)...

  5. 7 CFR 946.336 - Handling regulation.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... includes, but is not restricted to, potatoes for dehydration, chips, shoestrings, starch, and flour. It... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE IRISH POTATOES GROWN IN WASHINGTON Handling Regulations § 946.336 Handling regulation. No person shall handle any lot of...

  6. 7 CFR 948.386 - Handling regulation.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ..., starch, and flour. It includes only that preparation of potatoes for market which involves the... AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE IRISH POTATOES GROWN IN COLORADO Handling Regulations § 948.386 Handling regulation. No person shall handle any lot of potatoes grown...

  7. 7 CFR 948.386 - Handling regulation.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ..., starch, and flour. It includes only that preparation of potatoes for market which involves the... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE IRISH POTATOES GROWN IN COLORADO Handling Regulations § 948.386 Handling regulation. No person shall handle any lot of potatoes grown...

  8. 7 CFR 948.386 - Handling regulation.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... is not restricted to, potatoes for dehydration, chips, shoestrings, starch, and flour. It includes... AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE IRISH POTATOES GROWN IN COLORADO Handling Regulations § 948.386 Handling regulation. No person shall handle any lot of potatoes grown...

  9. 7 CFR 948.386 - Handling regulation.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... is not restricted to, potatoes for dehydration, chips, shoestrings, starch, and flour. It includes... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE IRISH POTATOES GROWN IN COLORADO Handling Regulations § 948.386 Handling regulation. No person shall handle any lot of potatoes grown...

  10. 7 CFR 946.336 - Handling regulation.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... includes, but is not restricted to, potatoes for dehydration, chips, shoestrings, starch, and flour. It... AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE IRISH POTATOES GROWN IN WASHINGTON Handling Regulations § 946.336 Handling regulation. No person shall handle any lot of...

  11. 7 CFR 948.386 - Handling regulation.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ..., starch, and flour. It includes only that preparation of potatoes for market which involves the... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE IRISH POTATOES GROWN IN COLORADO Handling Regulations § 948.386 Handling regulation. No person shall handle any lot of potatoes grown...

  12. 7 CFR 946.336 - Handling regulation.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... includes, but is not restricted to, potatoes for dehydration, chips, shoestrings, starch, and flour. It... AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE IRISH POTATOES GROWN IN WASHINGTON Handling Regulations § 946.336 Handling regulation. No person shall handle any lot of...

  13. 21 CFR 820.140 - Handling.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Handling. 820.140 Section 820.140 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES QUALITY SYSTEM REGULATION Handling, Storage, Distribution, and Installation § 820.140 Handling....

  14. 21 CFR 820.140 - Handling.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Handling. 820.140 Section 820.140 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES QUALITY SYSTEM REGULATION Handling, Storage, Distribution, and Installation § 820.140 Handling....

  15. 7 CFR 58.443 - Whey handling.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Whey handling. 58.443 Section 58.443 Agriculture... Procedures § 58.443 Whey handling. (a) Adequate sanitary facilities shall be provided for the handling of whey. If outside, necessary precautions shall be taken to minimize flies, insects and development...

  16. 21 CFR 820.140 - Handling.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Handling. 820.140 Section 820.140 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES QUALITY SYSTEM REGULATION Handling, Storage, Distribution, and Installation § 820.140 Handling....

  17. 7 CFR 947.7 - Handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Handle. 947.7 Section 947.7 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and... Definitions § 947.7 Handle. Handle is synonymous with ship and means to sell, transport, or in any other...

  18. 7 CFR 932.16 - Handle.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE OLIVES GROWN IN CALIFORNIA Order Regulating Handling Definitions § 932.16 Handle. Handle means to: (a) Size-grade olives, (b) process olives, or (c) use processed olives in the production of packaged olives, within the production area, or (d)...

  19. 7 CFR 932.16 - Handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE OLIVES GROWN IN CALIFORNIA Order Regulating Handling Definitions § 932.16 Handle. Handle means to: (a) Size-grade olives, (b) process olives, or (c) use processed olives in the production of packaged olives, within the production area, or (d)...

  20. 7 CFR 932.16 - Handle.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE OLIVES GROWN IN CALIFORNIA Order Regulating Handling Definitions § 932.16 Handle. Handle means to: (a) Size-grade olives, (b) process olives, or (c) use processed olives in the production of packaged olives, within the production area, or (d)...

  1. 7 CFR 932.16 - Handle.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE OLIVES GROWN IN CALIFORNIA Order Regulating Handling Definitions § 932.16 Handle. Handle means to: (a) Size-grade olives, (b) process olives, or (c) use processed olives in the production of packaged olives, within the production area, or (d)...

  2. 7 CFR 932.16 - Handle.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE OLIVES GROWN IN CALIFORNIA Order Regulating Handling Definitions § 932.16 Handle. Handle means to: (a) Size-grade olives, (b) process olives, or (c) use processed olives in the production of packaged olives, within the production area, or (d)...

  3. Productivity and ergonomic investigation of bent-handle pliers.

    PubMed

    Duke, Kelly; Mirka, Gary A; Sommerich, Carolyn M

    2004-01-01

    Awkward wrist posture is generally considered an occupational risk factor for hand/wrist disorders, leading to the ergonomic design principle of "bend the tool, not the wrist." Sixteen participants performed a computer jumper installation task and a simple assembly task while productivity, wrist posture, and shoulder posture were measured. The work surface orientation (vertical and 45 degrees) and the level of constraint placed on the user (constrained grip and unconstrained grip) were also varied. The results indicate that the beneficial effects of the bent-handle pliers are task dependent. In the computer jumper task the bent-handle pliers resulted in 5.3% faster task performance, whereas in the assembly task performance was 4.9% faster with the straight-handle pliers. The bent-handle pliers reduced shoulder deviations by 50% in the jumper installation task, and ulnar deviation was reduced by 12% and 22% for the jumper installation task and the assembly task, respectively (all significant at p < .05). However, allowing participants to hold the pliers in a grip configuration of their choosing (unconstrained technique) often reduced these postural benefits. In applying these results to workplace design activities, one should recognize that the ergonomic utility of bent-handle pliers can be considerable but that the 3-D kinematics characteristics of the task must be considered.

  4. Transfer Area Mechanical Handling Calculation

    SciTech Connect

    B. Dianda

    2004-06-23

    This calculation is intended to support the License Application (LA) submittal of December 2004, in accordance with the directive given by DOE correspondence received on the 27th of January 2004 entitled: ''Authorization for Bechtel SAX Company L.L. C. to Include a Bare Fuel Handling Facility and Increased Aging Capacity in the License Application, Contract Number DE-AC28-01R W12101'' (Arthur, W.J., I11 2004). This correspondence was appended by further Correspondence received on the 19th of February 2004 entitled: ''Technical Direction to Bechtel SAIC Company L.L. C. for Surface Facility Improvements, Contract Number DE-AC28-OIRW12101; TDL No. 04-024'' (BSC 2004a). These documents give the authorization for a Fuel Handling Facility to be included in the baseline. The purpose of this calculation is to establish preliminary bounding equipment envelopes and weights for the Fuel Handling Facility (FHF) transfer areas equipment. This calculation provides preliminary information only to support development of facility layouts and preliminary load calculations. The limitations of this preliminary calculation lie within the assumptions of section 5 , as this calculation is part of an evolutionary design process. It is intended that this calculation is superseded as the design advances to reflect information necessary to support License Application. The design choices outlined within this calculation represent a demonstration of feasibility and may or may not be included in the completed design. This calculation provides preliminary weight, dimensional envelope, and equipment position in building for the purposes of defining interface variables. This calculation identifies and sizes major equipment and assemblies that dictate overall equipment dimensions and facility interfaces. Sizing of components is based on the selection of commercially available products, where applicable. This is not a specific recommendation for the future use of these components or their related

  5. Hydraulically interconnected vehicle suspension: handling performance

    NASA Astrophysics Data System (ADS)

    Smith, Wade A.; Zhang, Nong; Hu, William

    2011-02-01

    This paper extends recent research on vehicles with hydraulically interconnected suspension (HIS) systems. Such suspension schemes have received considerable attention in the research community over the last few years. This is due, in part, to their reported ability to provide stiffness and damping rates dependent on the suspension mode of operation (i.e. the bounce, roll, pitch or articulation of the unsprung masses relative to the sprung mass), rather than relying on the stiffness and damping characteristics of the single wheel stations. The paper uses a nine-degrees-of-freedom (DOF) vehicle model and simulations of a fishhook manoeuvre to assess the handling performance of a vehicle when it is fitted with: (a) a conventional independent suspension, and (b) an HIS. In the case of the latter, the fluid subsystem is modelled using a nonlinear finite-element approach, resulting in a set of coupled, first-order nonlinear differential equations, which describe the dynamics of the integrated mechanical-hydraulic vehicle system. The simulation results indicate that, in general, the HIS-equipped vehicle possesses superior handling, as measured by the sprung mass roll angle, roll rate, roll acceleration, lateral acceleration and the vehicle's Rollover Critical Factor. The potential effects of the suspension set-up on ride performance are also considered by studying the transient response when one side of the vehicle traverses a half-sine bump. The obtained results are then discussed, and it is shown that they are consistent with previous findings, both by the authors and other researchers. The presented work outlines an alternative approach for studying the dynamics of HIS-equipped vehicles, particularly suited to analyses in the time domain.

  6. Remote-handled transuranic waste study

    SciTech Connect

    1995-10-01

    The Waste Isolation Pilot Plant (WIPP) was developed by the US Department of Energy (DOE) as a research and development facility to demonstrate the safe disposal of transuranic (TRU) radioactive wastes generated from the Nation`s defense activities. The WIPP disposal inventory will include up to 250,000 cubic feet of TRU wastes classified as remote handled (RH). The remaining inventory will include contact-handled (CH) TRU wastes, which characteristically have less specific activity (radioactivity per unit volume) than the RH-TRU wastes. The WIPP Land Withdrawal Act (LWA), Public Law 102-579, requires a study of the effect of RH-TRU waste on long-term performance. This RH-TRU Waste Study has been conducted to satisfy the requirements defined by the LWA and is considered by the DOE to be a prudent exercise in the compliance certification process of the WIPP repository. The objectives of this study include: conducting an evaluation of the impacts of RH-TRU wastes on the performance assessment (PA) of the repository to determine the effects of Rh-TRU waste as a part of the total WIPP disposal inventory; and conducting a comparison of CH-TRU and RH-TRU wastes to assess the differences and similarities for such issues as gas generation, flammability and explosiveness, solubility, and brine and geochemical interactions. This study was conducted using the data, models, computer codes, and information generated in support of long-term compliance programs, including the WIPP PA. The study is limited in scope to post-closure repository performance and includes an analysis of the issues associated with RH-TRU wastes subsequent to emplacement of these wastes at WIPP in consideration of the current baseline design. 41 refs.

  7. CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

    SciTech Connect

    J.F. Beesley

    2005-04-21

    The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.

  8. EXTREME -- Handling extreme data sets

    NASA Astrophysics Data System (ADS)

    Taylor, Mark

    This package provides some utilities, background documentation, and associated files for adapting the Starlink Software Collection, and software which uses it, to handle very large data sets. The principal focus of this is to move to use of 64 bits of address space on 64-bit operating systems. This document (SSN/73) is squarely aimed at the problem of adapting the Starlink Software Collection, and consequently focuses on the three operating systems (Solaris, Linux and Tru64) supported by Starlink, the compiled languages Fortran 77 and ANSI C, and Starlink's somewhat idiosyncratic build mechanisms. However, some of the discussion here may be of interest or use to people who are considering the change from 32 to 64 bits for software in other contexts.

  9. Development of longitudinal handling qualities criteria for large advanced supersonic aircraft

    NASA Technical Reports Server (NTRS)

    Sudderth, R. W.; Bohn, J. G.; Caniff, M. A.; Bennett, G. R.

    1975-01-01

    Longitudinal handling qualities criteria in terms of airplane response characteristics were developed. The criteria cover high speed cruise maneuvering, landing approach, and stall recovery. Data substantiating the study results are reported.

  10. Integrated Payload Data Handling Demonstrator

    NASA Astrophysics Data System (ADS)

    FitzGeorge, T.; Wishart, A.; Hann, M.; Phan, N.; Carr, C. M.; Cupido, E.; Fox, P.; Oddy, T.; McGregor, A.; Marshall, A.; Waltham, N.

    2013-09-01

    An integrated Payload Data Handling System (IPDHS) is one in which multiple instruments share a central payload processor for their on-board data processing tasks. This offers a number of advantages over the conventional decentralised architecture. Savings in payload mass and power can be realised because the total processing resource is matched to the requirement, as opposed to the decentralised architecture where the processing resource is in effect the sum of all the applications. Overall development cost can be reduced using a common processor. At individual instrument level the potential benefits include a standardised application development environment, and the opportunity to run the instrument data handling application on a fully redundant and more powerful processor. This paper describes a joint programme by Astrium Ltd, SCISYS UK Limited, Imperial College London and RAL Space to implement a realistic demonstration of an I-PDHS using engineering models of flight instruments (a magnetometer and a camera) and a laboratory demonstrator of a central payload processor which is functionally representative of a flight design. The objective is to raise the Technology Readiness Level (TRL) of the centralised data processing technique by addressing the key areas of task partitioning to prevent fault propagation and the use of a common development process for the instrument applications. The project is supported by a UK Space Agency grant awarded under the National Space Technology Programme SpaceCITI scheme. The demonstration system is set up at the UK Space Agency's International Space Innovation Centre (ISIC) at Harwell and makes use of the ISIC Concurrent Design Facility (CDF).

  11. Adverse experiences with nitric acid at the Savannah River Site

    SciTech Connect

    Durant, W.S.; Craig, D.K.; Vitacco, M.J.; McCormick, J.A.

    1991-06-01

    Nitric acid is used routinely at the Savannah River Site (SRS) in many processes. However, the site has experienced a number of adverse situations in handling nitric acid. These have ranged from minor injuries to personnel to significant explosions. This document compiles many of these events and includes discussions of process upsets, fires, injuries, and toxic effects of nitric acid and its decomposition products. The purpose of the publication is to apprise those using the acid that it is a potentially dangerous material and can react in many ways as demonstrated by SRS experience. 10 refs.

  12. Cask system design guidance for robotic handling

    SciTech Connect

    Griesmeyer, J.M.; Drotning, W.D.; Morimoto, A.K.; Bennett, P.C.

    1990-10-01

    Remote automated cask handling has the potential to reduce both the occupational exposure and the time required to process a nuclear waste transport cask at a handling facility. The ongoing Advanced Handling Technologies Project (AHTP) at Sandia National Laboratories is described. AHTP was initiated to explore the use of advanced robotic systems to perform cask handling operations at handling facilities for radioactive waste, and to provide guidance to cask designers regarding the impact of robotic handling on cask design. The proof-of-concept robotic systems developed in AHTP are intended to extrapolate from currently available commercial systems to the systems that will be available by the time that a repository would be open for operation. The project investigates those cask handling operations that would be performed at a nuclear waste repository facility during cask receiving and handling. The ongoing AHTP indicates that design guidance, rather than design specification, is appropriate, since the requirements for robotic handling do not place severe restrictions on cask design but rather focus on attention to detail and design for limited dexterity. The cask system design features that facilitate robotic handling operations are discussed, and results obtained from AHTP design and operation experience are summarized. The application of these design considerations is illustrated by discussion of the robot systems and their operation on cask feature mock-ups used in the AHTP project. 11 refs., 11 figs.

  13. Improvement of storage, handling, and transportability of fine coal. Quarterly technical progress report No. 5, January 1, 1995--March 31, 1995

    SciTech Connect

    1996-08-21

    The Mulled Coal process was developed as a means of overcoming the adverse handling characteristics of wet fine coal without thermal drying. The process involves the addition of a low cost, harmless reagent to wet fine coal using off-the-shelf mixing equipment. Based on laboratory- and bench-scale testing, Mulled Coal can be stored, shipped, and burned without causing any of the plugging, pasting, carryback and freezing problems normally associated with wet coal. The objectives of this project are to demonstrate that: the Mulled Coal process, which has been proven to work on a wide range of wet fine coals at bench scale, will work equally well on a continuous basis, producing consistent quality at a convincing rate of production in a commercial coal preparation plant; the wet product from a fine coal cleaning circuit can be converted to a solid fuel form for ease of handling and cost savings in storage and rail car transportation; and a wet fine coal product thus converted to a solid fuel form, can be stored, shipped, and burned with conventional fuel handling, transportation, and combustion systems. During this reporting period, virtually all of the technical activities and progress was made in the areas of circuit installation and startup operations. Work in these activity areas are described.

  14. Adverse Childhood Experiences and Hallucinations

    ERIC Educational Resources Information Center

    Whitfield, C.L.; Dube, S.R.; Felitti, V.J.; Anda, R.F.

    2005-01-01

    Objective:: Little information is available about the contribution of multiple adverse childhood experiences (ACEs) to the likelihood of reporting hallucinations. We used data from the ACE study to assess this relationship. Methods:: We conducted a survey about childhood abuse and household dysfunction while growing up, with questions about health…

  15. Adverse ocular reactions to drugs.

    PubMed Central

    Spiteri, M. A.; James, D. G.

    1983-01-01

    Drugs acting on various parts of the body may also affect the eye insidiously. Increased awareness of such drug toxicity by the prescribing doctor should encourage him to consider effects on the cornea, lens, retina, optic nerve and elsewhere when checking the patient's progress. The following review concerns adverse ocular effects of systemic drug administration. PMID:6356101

  16. Urbanicity, social adversity and psychosis

    PubMed Central

    Heinz, Andreas; Deserno, Lorenz; Reininghaus, Ulrich

    2013-01-01

    In recent years, there has been increasing interest in research on geographical variation in the incidence of schizophrenia and other psychoses. In this paper, we review the evidence on variation in incidence of schizophrenia and other psychoses in terms of place, as well as the individual- and area-level factors that account for this variation. We further review findings on potential mechanisms that link adverse urban environment and psychosis. There is evidence from earlier and more recent studies that urbanicity is associated with an increased incidence of schizophrenia and non-affective psychosis. In addition, considerable variation in incidence across neighbourhoods has been observed for these disorders. Findings suggest it is unlikely that social drift alone can fully account for geographical variation in incidence. Evidence further suggests that the impact of adverse social contexts – indexed by area-level exposures such as population density, social fragmentation and deprivation – on risk of psychosis is explained (confounding) or modified (interaction) by environmental exposures at the individual level (i.e., cannabis use, social adversity, exclusion and discrimination). On a neurobiological level, several studies suggest a close link between social adversity, isolation and stress on the one hand, and monoamine dysfunction on the other, which resembles findings in schizophrenia patients. However, studies directly assessing correlations between urban stress or discrimination and neurobiological alterations in schizophrenia are lacking to date. PMID:24096775

  17. Reverse engineering adverse outcome pathways.

    PubMed

    Perkins, Edward J; Chipman, J Kevin; Edwards, Stephen; Habib, Tanwir; Falciani, Francesco; Taylor, Ronald; Van Aggelen, Graham; Vulpe, Chris; Antczak, Philipp; Loguinov, Alexandre

    2011-01-01

    The toxicological effects of many stressors are mediated through unknown, or incompletely characterized, mechanisms of action. The application of reverse engineering complex interaction networks from high dimensional omics data (gene, protein, metabolic, signaling) can be used to overcome these limitations. This approach was used to characterize adverse outcome pathways (AOPs) for chemicals that disrupt the hypothalamus-pituitary-gonadal endocrine axis in fathead minnows (FHM, Pimephales promelas). Gene expression changes in FHM ovaries in response to seven different chemicals, over different times, doses, and in vivo versus in vitro conditions, were captured in a large data set of 868 arrays. Potential AOPs of the antiandrogen flutamide were examined using two mutual information-based methods to infer gene regulatory networks and potential AOPs. Representative networks from these studies were used to predict network paths from stressor to adverse outcome as candidate AOPs. The relationship of individual chemicals to an adverse outcome can be determined by following perturbations through the network in response to chemical treatment, thus leading to the nodes associated with the adverse outcome. Identification of candidate pathways allows for formation of testable hypotheses about key biological processes, biomarkers, or alternative endpoints that can be used to monitor an AOP. Finally, the unique challenges facing the application of this approach in ecotoxicology were identified and a road map for the utilization of these tools presented.

  18. CARRIER/CASK HANDLING SYSTEM DESCRIPTION DOCUMENT

    SciTech Connect

    E.F. Loros

    2000-06-23

    The Carrier/Cask Handling System receives casks on railcars and legal-weight trucks (LWTs) (transporters) that transport loaded casks and empty overpacks to the Monitored Geologic Repository (MGR) from the Carrier/Cask Transport System. Casks that come to the MGR on heavy-haul trucks (HHTs) are transferred onto railcars before being brought into the Carrier/Cask Handling System. The system is the interfacing system between the railcars and LWTs and the Assembly Transfer System (ATS) and Canister Transfer System (CTS). The Carrier/Cask Handling System removes loaded casks from the cask transporters and transfers the casks to a transfer cart for either the ATS or CTS, as appropriate, based on cask contents. The Carrier/Cask Handling System receives the returned empty casks from the ATS and CTS and mounts the casks back onto the transporters for reshipment. If necessary, the Carrier/Cask Handling System can also mount loaded casks back onto the transporters and remove empty casks from the transporters. The Carrier/Cask Handling System receives overpacks from the ATS loaded with canisters that have been cut open and emptied and mounts the overpacks back onto the transporters for disposal. If necessary, the Carrier/Cask Handling System can also mount empty overpacks back onto the transporters and remove loaded overpacks from them. The Carrier/Cask Handling System is located within the Carrier Bay of the Waste Handling Building System. The system consists of cranes, hoists, manipulators, and supporting equipment. The Carrier/Cask Handling System is designed with the tooling and fixtures necessary for handling a variety of casks. The Carrier/Cask Handling System performance and reliability are sufficient to support the shipping and emplacement schedules for the MGR. The Carrier/Cask Handling System interfaces with the Carrier/Cask Transport System, ATS, and CTS as noted above. The Carrier/Cask Handling System interfaces with the Waste Handling Building System for building

  19. Airborne nanoparticle exposures associated with the manual handling of nanoalumina and nanosilver in fume hoods

    NASA Astrophysics Data System (ADS)

    Tsai, Su-Jung (Candace); Ada, Earl; Isaacs, Jacqueline A.; Ellenbecker, Michael J.

    2009-01-01

    Manual handling of nanoparticles is a fundamental task of most nanomaterial research; such handling may expose workers to ultrafine or nanoparticles. Recent studies confirm that exposures to ultrafine or nanoparticles produce adverse inflammatory responses in rodent lungs and such particles may translocate to other areas of the body, including the brain. An important method for protecting workers handling nanoparticles from exposure to airborne nanoparticles is the laboratory fume hood. Such hoods rely on the proper face velocity for optimum performance. In addition, several other hood design and operating factors can affect worker exposure. Handling experiments were performed to measure airborne particle concentration while handling nanoparticles in three fume hoods located in different buildings under a range of operating conditions. Nanoalumina and nanosilver were selected to perform handling experiments in the fume hoods. Air samples were also collected on polycarbonate membrane filters and particles were characterized by scanning electron microscopy. Handling tasks included transferring particles from beaker to beaker by spatula and by pouring. Measurement locations were the room background, the researcher's breathing zone and upstream and downstream from the handling location. Variable factors studied included hood design, transfer method, face velocity/sash location and material types. Airborne particle concentrations measured at breathing zone locations were analyzed to characterize exposure level. Statistics were used to test the correlation between data. The test results found that the handling of dry powders consisting of nano-sized particles inside laboratory fume hoods can result in a significant release of airborne nanoparticles from the fume hood into the laboratory environment and the researcher's breathing zone. Many variables were found to affect the extent of particle release including hood design, hood operation (sash height, face velocity

  20. Health physics considerations in UF{sub 6} handling

    SciTech Connect

    Bailey, J.C.

    1991-12-31

    Uranium is a radioactive substance that emits alpha particles and very small amounts of gamma radiation. Its daughter products emit beta and gamma radiation. In uranium handling operations these are the radiations one must consider. This presentation will review the characteristics of the radiations, the isotopes from which they originate, the growth and decay of the uranium daughter products, and some specific health physics practices dictated by these factors.

  1. Handling S/MAR vectors.

    PubMed

    Hagedorn, Claudia; Baiker, Armin; Postberg, Jan; Ehrhardt, Anja; Lipps, Hans J

    2012-06-01

    Nonviral episomal vectors represent attractive alternatives to currently used virus-based expression systems. In the late 1990s, it was shown that a plasmid containing an expression cassette linked to a scaffold/matrix attached region (S/MAR) replicates as a low copy number episome in all cell lines tested, as well as primary cells, and can be used for the genetic modification of higher animals. Once established in the cell, the S/MAR vector replicates early during S-phase and, in the absence of selection, is stably retained in the cells for an unlimited period of time. This vector can therefore be regarded as a minimal model system for studying the epigenetic regulation of replication and functional nuclear architecture. In theory, this construct represents an almost "ideal" expression system for gene therapy. In practice, S/MAR-based vectors stably modify mammalian cells with efficiencies far below those of virus-based constructs. Consequently, they have not yet found application in gene therapy trials. Furthermore, S/MAR vector systems are not trivial to handle and several critical technical issues have to be considered when modifying these vectors for various applications.

  2. Apparatus for remotely handling components

    DOEpatents

    Szkrybalo, Gregory A.; Griffin, Donald L.

    1994-01-01

    The inventive apparatus for remotely handling bar-like components which define a longitudinal direction includes a gripper mechanism for gripping the component including first and second gripper members longitudinally fixedly spaced from each other and oriented parallel to each other in planes transverse to the longitudinal direction. Each gripper member includes a jaw having at least one V-groove with opposing surfaces intersecting at a base and extending radially relative to the longitudinal direction for receiving the component in an open end between the opposing surfaces. The V-grooves on the jaw plate of the first and second gripper members are aligned in the longitudinal direction to support the component in the first and second gripper members. A jaw is rotatably mounted on and a part of each of the first and second gripper members for selectively assuming a retracted mode in which the open end of the V-groove is unobstructed and active mode in which the jaw spans the open end of the V-groove in the first and second gripper members. The jaw has a locking surface for contacting the component in the active mode to secure the component between the locking surface of the jaw and the opposing surfaces of the V-groove. The locking surface has a plurality of stepped portions, each defining a progressively decreasing radial distance between the base of the V-groove and the stepped portion opposing the base to accommodate varying sizes of components.

  3. Adverse drug reactions: part II.

    PubMed

    Wooten, James M

    2010-11-01

    Pharmacovigilance is the process of identifying, monitoring, and effectively reducing adverse drug reactions. Adverse drug reactions (ADRs) are an important consideration when assessing a patient's health. The proliferation of new pharmaceuticals means that the incidence of ADRs is increasing. The goal for all health care providers must be to minimize the risk of ADRs as much as possible. Steps to achieve this include understanding the pharmacology for all drugs prescribed and proactively assessing and monitoring those patients at greatest risk for developing an ADR. Groups at greatest risk for developing ADRs include the elderly, children, and pregnant patients, as well as others. Pharmacovigilance must be effectively practiced by all health care providers in order to avoid ADRs.

  4. Adverse drug reactions: Part I.

    PubMed

    Wooten, James M

    2010-10-01

    Pharmacovigilance is the process of identifying, monitoring, and effectively reducing adverse drug reactions. Adverse drug reactions (ADRs) are an important consideration when assessing a patient's health. The proliferation of new pharmaceuticals means that the incidence of ADRs is increasing. The goal for all health care providers must be to minimize the risk of ADRs as much as possible. Steps to achieve this include understanding the pharmacology for all drugs prescribed and proactively assessing and monitoring those patients at greatest risk for developing an ADR. Groups at greatest risk for developing ADRs include the elderly, children, and pregnant patients, as well as others. Pharmacovigilance must effectively be practiced by all health providers in order to avoid ADRs.

  5. EXPLOSIVE PROPERTIES AND HANDLING CHARACTERISTICS OF HNS-I

    DTIC Science & Technology

    The terminating explosive components used with heat resistant mild detonating fuse ( MDF ) should contain explosives of comparable heat resistant... MDF end couplers and end boosters. It has acceptable detonation velocity and sensitivity for these uses.

  6. [Finasteride adverse effects: An update].

    PubMed

    Carreño-Orellana, Néstor; Moll-Manzur, Catherina; Carrasco-Zuber, Juan Eduardo; Álvarez-Véliz, Sergio; Berroeta-Mauriziano, Daniela; Porras-Kusmanic, Ninoska

    2016-12-01

    Finasteride is a 5-α reductase inhibitor that is widely used in the management of benign prostate hyperplasia and male pattern hair loss. It is well known that these agents improve the quality of life in men suffering from these conditions. However, they are associated with some transient and even permanent adverse effects. The aim of this article is to clarify the controversies about the safety of finasteride by analyzing the evidence available in the literature.

  7. [Pain as adverse drug reaction].

    PubMed

    Böhmdorfer, Birgit; Schaffarzick, Daniel; Nagano, Marietta; Janowitz, Susanne Melitta; Schweitzer, Ekkehard

    2012-09-01

    We present a multidisciplinary (anaesthesiology--clinical pharmacy--bioinformatics) analysis of pain as possible adverse drug reaction taking different manifestations of pain, indication groups, relevance to the Austrian drug market and possible mechanistic influence of drugs on development and apprehension of pain into consideration.We designed an overview that shows how transmitters that play a part in nociception and antinociception can be influenced by drugs. This allows conclusions to the dolorigene potential of therapeutics.

  8. Thiocolchicoside: review of adverse effects.

    PubMed

    2016-02-01

    Thiocolchicoside has long been used as a muscle relaxant, despite a lack of proven efficacy beyond the placebo effect. Its chemical structure consists of colchicine, a sugar (ose) and a sulphur-containing radical (thio), and its adverse effects are therefore likely to be similar to those of colchicine. Using the standard Prescrire methodology, we reviewed the available data on the adverse effects of thiocolchicoside. Liver injury, pancreatitis, seizures, blood cell disorders, severe cutaneous disorders, rhabdomyolysis and reproductive disorders have all been recorded in the French and European pharmacovigilance databases and in the periodic updates that the companies concerned submit to regulatory agencies. These data do not specify the frequency of the disorders nor do they identify the most susceptible patient populations. Thiocolchicoside is teratogenic in experimental animals and also damages chromosomes. Human data are limited to a follow-up of about 30 pregnant women (no major malformations) and reports of altered spermatogenesis, including cases of azoospermia. In practice, there is no justification for exposing patients to the adverse effects of thiocolchicoside. It is better to use an effective, well-known analgesic for patients complaining of muscle pain, starting with paracetamol.

  9. Adverse food-drug interactions.

    PubMed

    de Boer, Alie; van Hunsel, Florence; Bast, Aalt

    2015-12-01

    Food supplements and herbal products are increasingly popular amongst consumers. This leads to increased risks of interactions between prescribed drugs and these products containing bioactive ingredients. From 1991 up to 2014, 55 cases of suspected adverse drug reactions due to concomitant intake of health-enhancing products and drugs were reported to Lareb, the Netherlands Pharmacovigilance Centre. An overview of these suspected interactions is presented and their potential mechanisms of action are described. Mainly during the metabolism of xenobiotics and due to the pharmacodynamics effects interactions seem to occur, which may result in adverse drug reactions. Where legislation is seen to distinct food and medicine, legislation concerning these different bioactive products is less clear-cut. This can only be resolved by increasing the molecular knowledge on bioactive substances and their potential interactions. Thereby potential interactions can be better understood and prevented on an individual level. By considering the dietary pattern and use of bioactive substances with prescribed medication, both health professionals and consumers will be increasingly aware of interactions and these interactive adverse effects can be prevented.

  10. WASTE HANDLING BUILDING ELECTRICAL SYSTEM DESCRIPTION DOCUMENT

    SciTech Connect

    S.C. Khamamkar

    2000-06-23

    The Waste Handling Building Electrical System performs the function of receiving, distributing, transforming, monitoring, and controlling AC and DC power to all waste handling building electrical loads. The system distributes normal electrical power to support all loads that are within the Waste Handling Building (WHB). The system also generates and distributes emergency power to support designated emergency loads within the WHB within specified time limits. The system provides the capability to transfer between normal and emergency power. The system provides emergency power via independent and physically separated distribution feeds from the normal supply. The designated emergency electrical equipment will be designed to operate during and after design basis events (DBEs). The system also provides lighting, grounding, and lightning protection for the Waste Handling Building. The system is located in the Waste Handling Building System. The system consists of a diesel generator, power distribution cables, transformers, switch gear, motor controllers, power panel boards, lighting panel boards, lighting equipment, lightning protection equipment, control cabling, and grounding system. Emergency power is generated with a diesel generator located in a QL-2 structure and connected to the QL-2 bus. The Waste Handling Building Electrical System distributes and controls primary power to acceptable industry standards, and with a dependability compatible with waste handling building reliability objectives for non-safety electrical loads. It also generates and distributes emergency power to the designated emergency loads. The Waste Handling Building Electrical System receives power from the Site Electrical Power System. The primary material handling power interfaces include the Carrier/Cask Handling System, Canister Transfer System, Assembly Transfer System, Waste Package Remediation System, and Disposal Container Handling Systems. The system interfaces with the MGR Operations

  11. Determinants of Adverse Events in Vascular Surgery

    PubMed Central

    Hernandez-Boussard, Tina; McDonald, Kathryn; Morton, John; Dalman, Ron L; Bech, Fritz R

    2016-01-01

    Background Patient safety is a national priority. Patient Safety Indicators (PSIs) monitor potential adverse events during hospital stays. Surgical specialty PSI benchmarks do not exist, which are needed to account for differences in the range of procedures performed, reasons for the procedure, and differences in patient characteristics. A comprehensive profile of adverse events in vascular surgery was created. Study Design The Nationwide Inpatient Sample was queried for 8 vascular procedures using ICD-9-CM codes from 2005–2009. Factors associated with PSI development were evaluated in univariate and multivariate analyses. Results A total of 1,412,703 patients underwent a vascular procedure and 5.2% developed a PSI. PSIs were more frequent in female, non-white patients with public payers (p<.01). Patients at mid and low volume hospitals had greater odds of developing a PSI (Odds Ratio [OR], 1.17; 95% Confidence Interval [CI], 1.10–1.23 and OR, 1.69; CI, 1.53–1.87). Amputations had highest PSI risk-adjusted rate (RAR) and carotid endarterectomy and endovascular abdominal aortic aneurysm (AAA) repair had lower RAR (p<.0001). PSI RAR increased linearly by severity of patient indication: claudicants (OR, 0.40, CI, 0.35–0.46), rest pain patients (OR, 0.78, CI 0.69–0.90), ulcer (OR: 1.20, CI: 1.07–1.34) and gangrene patients (OR:1.85, CI: 1.66–2.06). Conclusions Patient safety events in vascular surgery were high and varied by procedure, with amputations and open AAA having substantially more potential adverse events. PSIs were associated with black race, public payer, and procedure indication. It is important to note the overall higher rates of PSIs occurring in vascular patients and appropriately adjust benchmarks for this surgical specialty. PMID:22425449

  12. Mining unexpected temporal associations: applications in detecting adverse drug reactions.

    PubMed

    Jin, Huidong Warren; Chen, Jie; He, Hongxing; Williams, Graham J; Kelman, Chris; O'Keefe, Christine M

    2008-07-01

    In various real-world applications, it is very useful mining unanticipated episodes where certain event patterns unexpectedly lead to outcomes, e.g., taking two medicines together sometimes causing an adverse reaction. These unanticipated episodes are usually unexpected and infrequent, which makes existing data mining techniques, mainly designed to find frequent patterns, ineffective. In this paper, we propose unexpected temporal association rules (UTARs) to describe them. To handle the unexpectedness, we introduce a new interestingness measure, residual-leverage, and develop a novel case-based exclusion technique for its calculation. Combining it with an event-oriented data preparation technique to handle the infrequency, we develop a new algorithm MUTARC to find pairwise UTARs. The MUTARC is applied to generate adverse drug reaction (ADR) signals from real-world healthcare administrative databases. It reliably shortlists not only six known ADRs, but also another ADR, flucloxacillin possibly causing hepatitis, which our algorithm designers and experiment runners have not known before the experiments. The MUTARC performs much more effectively than existing techniques. This paper clearly illustrates the great potential along the new direction of ADR signal generation from healthcare administrative databases.

  13. 7 CFR 1207.307 - Handle.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE POTATO RESEARCH AND PROMOTION PLAN Potato Research and Promotion Plan Definitions § 1207.307 Handle. Handle means to grade, pack, process, sell, transport, purchase, or in any other way to place potatoes or cause potatoes to be placed in...

  14. 7 CFR 1207.307 - Handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE POTATO RESEARCH AND PROMOTION PLAN Potato Research and Promotion Plan Definitions § 1207.307 Handle. Handle means to grade, pack, process, sell, transport, purchase, or in any other way to place potatoes or cause potatoes to be placed in...

  15. 7 CFR 1207.307 - Handle.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE POTATO RESEARCH AND PROMOTION PLAN Potato Research and Promotion Plan Definitions § 1207.307 Handle. Handle means to grade, pack, process, sell, transport, purchase, or in any other way to place potatoes or cause potatoes to be placed in...

  16. 7 CFR 1207.307 - Handle.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE POTATO RESEARCH AND PROMOTION PLAN Potato Research and Promotion Plan Definitions § 1207.307 Handle. Handle means to grade, pack, process, sell, transport, purchase, or in any other way to place potatoes or cause potatoes to be placed in...

  17. 7 CFR 1207.307 - Handle.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE POTATO RESEARCH AND PROMOTION PLAN Potato Research and Promotion Plan Definitions § 1207.307 Handle. Handle means to grade, pack, process, sell, transport, purchase, or in any other way to place potatoes or cause potatoes to be placed in...

  18. 7 CFR 926.9 - Handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.9 Handle. Handle... contract carrier of cranberries owned by another person) fresh or processed cranberries produced within or outside the United States or in any other way to place fresh or processed cranberries into the current...

  19. 7 CFR 926.9 - Handle.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.9 Handle. Handle... contract carrier of cranberries owned by another person) fresh or processed cranberries produced within or outside the United States or in any other way to place fresh or processed cranberries into the current...

  20. 7 CFR 926.9 - Handle.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.9 Handle. Handle... contract carrier of cranberries owned by another person) fresh or processed cranberries produced within or outside the United States or in any other way to place fresh or processed cranberries into the current...

  1. 7 CFR 926.9 - Handle.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.9 Handle. Handle... contract carrier of cranberries owned by another person) fresh or processed cranberries produced within or outside the United States or in any other way to place fresh or processed cranberries into the current...

  2. 7 CFR 926.9 - Handle.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.9 Handle. Handle... contract carrier of cranberries owned by another person) fresh or processed cranberries produced within or outside the United States or in any other way to place fresh or processed cranberries into the current...

  3. 9 CFR 3.92 - Handling.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Handling. 3.92 Section 3.92 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment, and Transportation of...

  4. 9 CFR 3.66 - Handling.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Handling. 3.66 Section 3.66 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment and Transportation of...

  5. 7 CFR 1221.11 - Handle.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE SORGHUM PROMOTION, RESEARCH, AND INFORMATION ORDER Sorghum Promotion, Research, and Information Order Definitions § 1221.11 Handle. Handle means to engage in the receiving or acquiring of sorghum and in the shipment (except as a common...

  6. 7 CFR 1221.11 - Handle.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE SORGHUM PROMOTION, RESEARCH, AND INFORMATION ORDER Sorghum Promotion, Research, and Information Order Definitions § 1221.11 Handle. Handle means to engage in the receiving or acquiring of sorghum and in the shipment (except as a common...

  7. 7 CFR 1221.11 - Handle.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE SORGHUM PROMOTION, RESEARCH, AND INFORMATION ORDER Sorghum Promotion, Research, and Information Order Definitions § 1221.11 Handle. Handle means to engage in the receiving or acquiring of sorghum and in the shipment (except as a common...

  8. 7 CFR 1221.11 - Handle.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE SORGHUM PROMOTION, RESEARCH, AND INFORMATION ORDER Sorghum Promotion, Research, and Information Order Definitions § 1221.11 Handle. Handle means to engage in the receiving or acquiring of sorghum and in the shipment (except as a common...

  9. 7 CFR 1221.11 - Handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE SORGHUM PROMOTION, RESEARCH, AND INFORMATION ORDER Sorghum Promotion, Research, and Information Order Definitions § 1221.11 Handle. Handle means to engage in the receiving or acquiring of sorghum and in the shipment (except as a common...

  10. 9 CFR 3.118 - Handling.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Handling. 3.118 Section 3.118 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment, and Transportation of...

  11. 9 CFR 3.118 - Handling.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Handling. 3.118 Section 3.118 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment, and Transportation of...

  12. 7 CFR 1216.12 - Handle.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE PEANUT PROMOTION, RESEARCH, AND INFORMATION ORDER Peanut Promotion, Research, and Information Order Definitions § 1216.12 Handle. Handle means... peanuts and in the shipment (except as a common or contract carrier of peanuts owned by another) or...

  13. 7 CFR 1216.12 - Handle.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE PEANUT PROMOTION, RESEARCH, AND INFORMATION ORDER Peanut Promotion, Research, and Information Order Definitions § 1216.12 Handle. Handle means... peanuts and in the shipment (except as a common or contract carrier of peanuts owned by another) or...

  14. 7 CFR 996.4 - Handle.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.4 Handle. Handle means to... imported peanuts and in the shipment (except as a common or contract carrier of peanuts owned by another) or sale of cleaned-inshell or shelled peanuts or other activity causing peanuts to enter into...

  15. 7 CFR 1216.12 - Handle.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE PEANUT PROMOTION, RESEARCH, AND INFORMATION ORDER Peanut Promotion, Research, and Information Order Definitions § 1216.12 Handle. Handle means... peanuts and in the shipment (except as a common or contract carrier of peanuts owned by another) or...

  16. 7 CFR 1216.12 - Handle.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE PEANUT PROMOTION, RESEARCH, AND INFORMATION ORDER Peanut Promotion, Research, and Information Order Definitions § 1216.12 Handle. Handle means... peanuts and in the shipment (except as a common or contract carrier of peanuts owned by another) or...

  17. 7 CFR 1216.12 - Handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE PEANUT PROMOTION, RESEARCH, AND INFORMATION ORDER Peanut Promotion, Research, and Information Order Definitions § 1216.12 Handle. Handle means... peanuts and in the shipment (except as a common or contract carrier of peanuts owned by another) or...

  18. 29 CFR 1926.953 - Material handling.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Material handling. 1926.953 Section 1926.953 Labor... Material handling. (a) Unloading. Prior to unloading steel, poles, cross arms and similar material, the... shall be attached to the trailing end of the longest pole. (c) Storage. (1) No materials or...

  19. 7 CFR 983.14 - Handle.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE PISTACHIOS GROWN IN CALIFORNIA, ARIZONA, AND NEW MEXICO Definitions § 983.14 Handle. Handle means to engage in: (a) Receiving pistachios; (b) Hulling and drying pistachios; (c) Further preparing pistachios by sorting, sizing, shelling,...

  20. 7 CFR 983.14 - Handle.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE PISTACHIOS GROWN IN CALIFORNIA, ARIZONA, AND NEW MEXICO Definitions § 983.14 Handle. Handle means to engage in: (a) Receiving pistachios; (b) Hulling and drying pistachios; (c) Further preparing pistachios by sorting, sizing, shelling,...

  1. 7 CFR 983.14 - Handle.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE PISTACHIOS GROWN IN CALIFORNIA, ARIZONA, AND NEW MEXICO Definitions § 983.14 Handle. Handle means to engage in: (a) Receiving pistachios; (b) Hulling and drying pistachios; (c) Further preparing pistachios by sorting, sizing, shelling,...

  2. 7 CFR 1219.11 - Handle.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE HASS AVOCADO PROMOTION, RESEARCH, AND INFORMATION Hass Avocado Promotion, Research, and Information Order Definitions § 1219.11 Handle. Handle means to pack, process, transport, purchase, or in any other way to place or cause Hass...

  3. 7 CFR 1219.11 - Handle.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE HASS AVOCADO PROMOTION, RESEARCH, AND INFORMATION Hass Avocado Promotion, Research, and Information Order Definitions § 1219.11 Handle. Handle means to pack, process, transport, purchase, or in any other way to place or cause Hass...

  4. 7 CFR 1219.11 - Handle.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE HASS AVOCADO PROMOTION, RESEARCH, AND INFORMATION Hass Avocado Promotion, Research, and Information Order Definitions § 1219.11 Handle. Handle means to pack, process, transport, purchase, or in any other way to place or cause Hass...

  5. 7 CFR 1219.11 - Handle.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE HASS AVOCADO PROMOTION, RESEARCH, AND INFORMATION Hass Avocado Promotion, Research, and Information Order Definitions § 1219.11 Handle. Handle means to pack, process, transport, purchase, or in any other way to place or cause Hass...

  6. 7 CFR 1219.11 - Handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE HASS AVOCADO PROMOTION, RESEARCH, AND INFORMATION Hass Avocado Promotion, Research, and Information Order Definitions § 1219.11 Handle. Handle means to pack, process, transport, purchase, or in any other way to place or cause Hass...

  7. 7 CFR 1210.307 - Handle.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE WATERMELON RESEARCH AND PROMOTION PLAN Watermelon Research and Promotion Plan Definitions § 1210.307 Handle. Handle means to grade, pack, process, sell, transport, purchase, or in any other way to place or cause watermelons to which one...

  8. 7 CFR 1210.307 - Handle.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE WATERMELON RESEARCH AND PROMOTION PLAN Watermelon Research and Promotion Plan Definitions § 1210.307 Handle. Handle means to grade, pack, process, sell, transport, purchase, or in any other way to place or cause watermelons to which one...

  9. 7 CFR 1210.307 - Handle.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE WATERMELON RESEARCH AND PROMOTION PLAN Watermelon Research and Promotion Plan Definitions § 1210.307 Handle. Handle means to grade, pack, process, sell, transport, purchase, or in any other way to place or cause watermelons to which one...

  10. 7 CFR 1210.307 - Handle.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE WATERMELON RESEARCH AND PROMOTION PLAN Watermelon Research and Promotion Plan Definitions § 1210.307 Handle. Handle means to grade, pack, process, sell, transport, purchase, or in any other way to place or cause watermelons to which one...

  11. 7 CFR 1210.307 - Handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE WATERMELON RESEARCH AND PROMOTION PLAN Watermelon Research and Promotion Plan Definitions § 1210.307 Handle. Handle means to grade, pack, process, sell, transport, purchase, or in any other way to place or cause watermelons to which one...

  12. 9 CFR 3.66 - Handling.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling. 3.66 Section 3.66 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment and Transportation of...

  13. 9 CFR 3.92 - Handling.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling. 3.92 Section 3.92 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment, and Transportation of...

  14. 29 CFR 1926.953 - Material handling.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 8 2013-07-01 2013-07-01 false Material handling. 1926.953 Section 1926.953 Labor... Material handling. (a) Unloading. Prior to unloading steel, poles, cross arms and similar material, the... shall be attached to the trailing end of the longest pole. (c) Storage. (1) No materials or...

  15. 29 CFR 1926.953 - Material handling.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 8 2012-07-01 2012-07-01 false Material handling. 1926.953 Section 1926.953 Labor... Material handling. (a) Unloading. Prior to unloading steel, poles, cross arms and similar material, the... shall be attached to the trailing end of the longest pole. (c) Storage. (1) No materials or...

  16. 29 CFR 1926.953 - Material handling.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 8 2011-07-01 2011-07-01 false Material handling. 1926.953 Section 1926.953 Labor... Material handling. (a) Unloading. Prior to unloading steel, poles, cross arms and similar material, the... shall be attached to the trailing end of the longest pole. (c) Storage. (1) No materials or...

  17. 29 CFR 1926.953 - Material handling.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 8 2014-07-01 2014-07-01 false Material handling. 1926.953 Section 1926.953 Labor... Material handling. (a) Unloading. Prior to unloading steel, poles, cross arms and similar material, the... shall be attached to the trailing end of the longest pole. (c) Storage. (1) No materials or...

  18. Handling an Asthma Flare-Up

    MedlinePlus

    ... dientes Video: Getting an X-ray Handling an Asthma Flare-Up KidsHealth > For Kids > Handling an Asthma Flare-Up Print A A A What's in ... asmáticas What's a Flare-Up? If you have asthma, you probably know about flare-ups . That's when ...

  19. 9 CFR 3.118 - Handling.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment, and Transportation of Marine Mammals Transportation Standards § 3.118 Handling. (a) Carriers and intermediate handlers moving marine... protect the marine mammals. Marine mammals must not be subjected to surrounding air temperatures...

  20. 29 CFR 1917.18 - Log handling.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Log handling. 1917.18 Section 1917.18 Labor Regulations...) MARINE TERMINALS Marine Terminal Operations § 1917.18 Log handling. (a) The employer shall ensure that structures (bunks) used to contain logs have rounded corners and rounded structural parts to avoid...

  1. 29 CFR 1917.18 - Log handling.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 7 2012-07-01 2012-07-01 false Log handling. 1917.18 Section 1917.18 Labor Regulations...) MARINE TERMINALS Marine Terminal Operations § 1917.18 Log handling. (a) The employer shall ensure that structures (bunks) used to contain logs have rounded corners and rounded structural parts to avoid...

  2. 29 CFR 1917.18 - Log handling.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 7 2013-07-01 2013-07-01 false Log handling. 1917.18 Section 1917.18 Labor Regulations...) MARINE TERMINALS Marine Terminal Operations § 1917.18 Log handling. (a) The employer shall ensure that structures (bunks) used to contain logs have rounded corners and rounded structural parts to avoid...

  3. 29 CFR 1917.18 - Log handling.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 7 2011-07-01 2011-07-01 false Log handling. 1917.18 Section 1917.18 Labor Regulations...) MARINE TERMINALS Marine Terminal Operations § 1917.18 Log handling. (a) The employer shall ensure that structures (bunks) used to contain logs have rounded corners and rounded structural parts to avoid...

  4. 29 CFR 1917.18 - Log handling.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 7 2014-07-01 2014-07-01 false Log handling. 1917.18 Section 1917.18 Labor Regulations...) MARINE TERMINALS Marine Terminal Operations § 1917.18 Log handling. (a) The employer shall ensure that structures (bunks) used to contain logs have rounded corners and rounded structural parts to avoid...

  5. Travel in Adverse Weather Using Electronic Mobility Guidance Devices

    ERIC Educational Resources Information Center

    Farmer, Leicester W.

    1975-01-01

    After a discussion of the required characteristics of an ideal aid for blind individuals traveling in adverse weather, four electronic mobility guidance devices- the Mowat Sonar Sensor, the Russell E Model Pathsounder, the Bionic C-5 Laser Cane, and the Mark II Binaural Sensory Aid-are described in detail. (Author/SB)

  6. Improvement of storage, handling, and transportability of fine coal. Quarterly technical progress report No. 7, July 1, 1995--September 30, 1995

    SciTech Connect

    1996-08-22

    The Mulled Coal process was developed as a means of overcoming the adverse handling characteristics of wet fine coal without thermal drying. The process involves the addition of a low cost harmless reagent to wet fine coal using off-the-shelf mixing equipment. Based on laboratory- and bench-scale testing, Mulled Coal can be stored, shipped, and burned without causing any of the plugging, pasting, carryback and freezing problems normally associated with wet coal. The objectives of this project are to demonstrate that: The Mulled Coal process, which has been proven to work on a wide range of wet fine coals at bench scale, will work equally well in a commercial coal preparation plant. The wet product from a fine coal cleaning circuit can be converted to a solid fuel form for ease of handling and cost savings in storage and rail car transportation. A wet fine coal product thus converted to a solid fuel form can be stored, shipped, and burned with conventional fuel handling, transportation, and combustion systems. The Mulled Coal circuit was installed in an empty bay at the Chetopa Preparation Plant. Equipment has been installed to divert a 2.7 tonnes/hr (3 tons/hr) slipstream of the froth concentrate to a dewatering centrifuge. The concentrated wet coal fines from the centrifuge dropped through a chute directly into a surge hopper and feed system for the Mulled Coal circuit. The Mulled Coal product was gravity discharged from the circuit to a truck or product discharge area from which it will be hauled to a stockpile located at the edge of the clean coal stockpile area. During the 3-month operating period, the facility produced 870 tonnes (966 tons) of the Muffed Coal for evaluation in various storage, handling, and transportation equipment and operations. Immediately following the production demonstration, the circuit was disassembled and the facility was decommissioned.

  7. Adverse responses to local anaesthetics.

    PubMed

    Fisher, M M; Graham, R

    1984-11-01

    Progressive challenge was used to investigate twenty-seven patients with a history of an adverse response to local anaesthesia. True allergy was detected in only one patient. The method does not exclude reactions to additives and preservatives in local anaesthetics. If preservative-free local anaesthetics are used for subsequent exposure in patients with no response to progressive challenge, subsequent exposure is safe. The possibility that some of these patients may be reacting to preservatives in the solutions cannot be excluded by such testing. Where possible preservative-free local anaesthetic preparations should be used for subsequent anaesthesia.

  8. Childhood adversities and adult-onset asthma: a cohort study

    PubMed Central

    Korkeila, Jyrki; Lietzen, Raija; Sillanmäki, Lauri H; Rautava, Päivi; Korkeila, Katariina; Kivimäki, Mika; Koskenvuo, Markku; Vahtera, Jussi

    2012-01-01

    Objectives Childhood adversities may be important determinants of later illnesses and poor health behaviour. However, large-scale prospective studies on the associations between childhood adversities and the onset of asthma in adulthood are lacking. Design Prospective cohort study with 7-year follow-up. Setting Nationally representative study. Data were collected from the Health and Social Support (HeSSup) survey and national registers. Participants The participants represent the Finnish population from the following age groups: 20–24, 30–34, 40–44, and 50–54 years at baseline in 1998 (24 057 survey participants formed the final cohort of this study). The occurrence of childhood adversities was assessed at baseline with a six-item survey scale. The analyses were adjusted for sociodemographic characteristics, behavioural health risks and common mental disorders. Primary and secondary outcomes The survey data were linked to data from national health registers on incident asthma during a 7-year follow-up to define new-onset asthma cases with verified diagnoses. Results A total of 12 126 (59%) participants reported that they encountered a childhood adversity. Of them 3677 (18% of all) endured three to six adversities. During a follow-up of 7 years, 593 (2.9%) participants were diagnosed with incident asthma. Those who reported three or more childhood adversities had a 1.6-fold (95% CI 1.31 to 2.01) greater risk of asthma compared to those without childhood adversities. This hazard attenuated but remained statistically significant after adjustment for conventional risk factors (HR 1.33; 95% CI 1.06 to 1.67). Conclusions Adults who report having encountered adversities in childhood may have an increased risk of developing asthma. PMID:23069774

  9. Handling Qualities of Large Rotorcraft in Hover and Low Speed

    NASA Technical Reports Server (NTRS)

    Malpica, Carlos; Theodore, Colin R.; Lawrence , Ben; Blanken, Chris L.

    2015-01-01

    According to a number of system studies, large capacity advanced rotorcraft with a capability of high cruise speeds (approx.350 mph) as well as vertical and/or short take-off and landing (V/STOL) flight could alleviate anticipated air transportation capacity issues by making use of non-primary runways, taxiways, and aprons. These advanced aircraft pose a number of design challenges, as well as unknown issues in the flight control and handling qualities domains. A series of piloted simulation experiments have been conducted on the NASA Ames Research Center Vertical Motion Simulator (VMS) in recent years to systematically investigate the fundamental flight control and handling qualities issues associated with the characteristics of large rotorcraft, including tiltrotors, in hover and low-speed maneuvering.

  10. Physiological effects of handling and hauling stress on smallmouth bass

    USGS Publications Warehouse

    Carmichael, G.J.; Wedemeyer, G.A.; McCraren, J.P.; Millard, J.L.

    1983-01-01

    Basic physiological information on the stress caused by current hatchery practices is helpful in developing new and improved techniques to increase survival. In view of the present fishery management requirements for stocking smallmouth bas (Micropterus dolomieu), baseline information on the physiological effects of handling and hauling hatchery-reared fish is needed to serve as the foundation for improving transport methods. Shell (1959) summarized several physiological characteristics of smallmouth bass, but little information on their physiological tolerance to stress exists. The present study was designed to determine the physiological effects of handling and short-term hauling in small mouth bass. Plasma chloride, sodium, potassium, and glucose dynamics were monitored in indicate the severity of the resulting stress and the recovery time needed.

  11. How the NWC handles software as product

    SciTech Connect

    Vinson, D.

    1997-11-01

    This tutorial provides a hands-on view of how the Nuclear Weapons Complex project should be handling (or planning to handle) software as a product in response to Engineering Procedure 401099. The SQAS has published the document SQAS96-002, Guidelines for NWC Processes for Handling Software Product, that will be the basis for the tutorial. The primary scope of the tutorial is on software products that result from weapons and weapons-related projects, although the information presented is applicable to many software projects. Processes that involve the exchange, review, or evaluation of software product between or among NWC sites, DOE, and external customers will be described.

  12. Mooring and ground handling rigid airships

    NASA Technical Reports Server (NTRS)

    Walker, H., Jr.

    1975-01-01

    The problems of mooring and ground handling rigid airships are discussed. A brief history of Mooring and Ground Handling Rigid Airships from July 2, 1900 through September 1, 1939 is included. Also a brief history of ground handling developments with large U. S. Navy nonrigid airships between September 1, 1939 and August 31, 1962 is included wherein developed equipment and techniques appear applicable to future large rigid airships. Finally recommendations are made pertaining to equipment and procedures which appear desirable and feasible for future rigid airship programs.

  13. Effects of handle orientation and between-handle distance on bi-manual isometric push strength.

    PubMed

    Lin, Jia-Hua; McGorry, Raymond W; Chang, Chien-Chi

    2012-07-01

    Hand-handle interface is seldom considered in contemporary upper limb biomechanical analyses of pushing and pulling strength. A laboratory study was designed to examine if handle rotation in the frontal plane (0°-horizontal, 45°, and 90°-vertical), anterior tilt (0°-parallel to the frontal plane, and 15°), and distance between two handles (31 and 48.6 cm) affect pushing strength and subjective rating of handle preference. A special testing station was constructed to elicit upper limb push exertions that involved minimal contribution of the torso and legs. Within the station, four load cells were used to measure the horizontal (forward pushing) and vertical components of the pushing forces. Thirty-one participants performed seated bi-manual pushing strength tests. Comparing to the reference handle configuration (horizontal, straight, and a 31-cm between-handle distance), the 45°-rotated and tilted handles with a 31-cm between-handle distance allowed 6.7% more pushing output, while the horizontal and tilted handles with a 31-cm between-handle distance resulted in 2.8% less. Subjective preference was correlated with normalized pushing strength (r=0.89). Tilted handles, at 45°-rotated and vertical positions received highest subjective ratings of preference among all handle configurations. Men exerted greater pushing strength with the 48.6-cm handle distance while women's capacity was greatest with the 31-cm distance. The results demonstrated that handle rotation and tilt angles affected pushing strength and should be taken into consideration when evaluating or designing pushing tasks.

  14. "Adversative Conjunction": The Poetics of Linguistic Opposition.

    ERIC Educational Resources Information Center

    Wallerstein, Nicholas

    1992-01-01

    The general use of adversative conjunction in (primarily) English and U.S. poetry is outlined. The contention is that the adversative is not merely a grammatical convenience but sometimes a highly functional tool of rhetorical strategy. (36 references) (LB)

  15. The international serious adverse events consortium.

    PubMed

    Holden, Arthur L; Contreras, Jorge L; John, Sally; Nelson, Matthew R

    2014-11-01

    The International Serious Adverse Events Consortium is generating novel insights into the genetics and biology of drug-induced serious adverse events, and thereby improving pharmaceutical product development and decision-making.

  16. The effects of aircraft design and atmospheric turbulence on handling and ride qualities

    NASA Technical Reports Server (NTRS)

    Jones, C. R.; Jacobson, I. D.

    1976-01-01

    The effects of aircraft dynamic characteristics on passenger ride quality were investigated to determine ride-quality isocontours similar to aircraft handling-qualities contours. Measurements were made on a motion-base simulator while varying the aircraft short-period and Dutch Roll frequencies and dampings. Both pilot ratings and subjective ride-quality ratings were obtained during simulator flight. Ride and handling qualities were found to be complimentary for the Dutch Roll mode, but not for the short-period mode. Regions of optimal ride and handling qualities were defined for the short-period mode, and the effects of changes in turbulence level studied using mathematical models.

  17. Sampling and handling of desert soils

    NASA Technical Reports Server (NTRS)

    Blank, G. B.; Cameron, R. E.

    1969-01-01

    Report on sampling and handling desert soils includes sections on selection, characterization, and photography of area, site, and soil, sterilization of sampling equipment and containers, and soil sample collection, transport, storage, and dispersal.

  18. Intertextuality for Handling Complex Environmental Issues

    NASA Astrophysics Data System (ADS)

    Byhring, Anne Kristine; Knain, Erik

    2016-02-01

    Nowhere is the need for handling complexity more pertinent than in addressing environmental issues. Our study explores students' situated constructs of complexity in unfolding discourses on socio-scientific issues. Students' dialogues in two group-work episodes are analysed in detail, with tools from Systemic Functional Linguistics. We identify the significance of intertextuality in students' realizations of low- and high-complexity discourses. In the high-complexity event, we show how students take on different roles and use modality and projection as grammatical resources for opening up, for different positions, multiple voices, and various contextual resources. Successful handling of complexity is construed by the interplay between students' roles in the discourse and resources in language for making multiple voices present. In the high-complexity event, the handling of complexity is guided by the students' sense of purpose. Handling complexity is demanding, and explicit scaffolding is necessary to prevent a potentially complex challenge from being treated as a simple one.

  19. Upgrading and refurbishing coal-handling systems

    SciTech Connect

    Strauss, S.D.

    1983-03-01

    Case histories presented at the Coal Technology '82 meetings are singled out in this article as examples of integrated attacks on coal-handling problems. At the Ohio Edison Co. Sammis Plant the conveyor passed over a public highway, and fugitive coal rained on passing vehicles. Four belt cleaners and a modified gas reducer were installed. Belt-cleaning systems were then installed throughout the plant. At the Con Edison Arthur Kill station coal-receiving facilities, coal conveyors, and ash-handling systems were upgraded. The rotary dumper was modified, the coal-thawing equipment modernized. In the breaker house a rotary breaker was replaced by a ring-type coal crusher. The outmoded pneumatic type ash-handling system was replaced by a drag-chain conveyor. Such concerted plantwide efforts are still the exception, where coal-handling equipment is cared for on a day-to-day patchwork basis.

  20. 7 CFR 996.4 - Handle.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE MINIMUM QUALITY AND HANDLING STANDARDS FOR... consumption channels of commerce: Provided, That this term does not include sales or deliveries of peanuts...

  1. 7 CFR 996.4 - Handle.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE MINIMUM QUALITY AND HANDLING STANDARDS FOR... consumption channels of commerce: Provided, That this term does not include sales or deliveries of peanuts...

  2. 7 CFR 996.4 - Handle.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE MINIMUM QUALITY AND HANDLING STANDARDS FOR... consumption channels of commerce: Provided, That this term does not include sales or deliveries of peanuts...

  3. 7 CFR 996.4 - Handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE MINIMUM QUALITY AND HANDLING STANDARDS FOR... consumption channels of commerce: Provided, That this term does not include sales or deliveries of peanuts...

  4. 7 CFR 959.322 - Handling regulation.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... quantity exemption. Any handler may handle, other than for resale, up to, but not to exceed 110 pounds of.... Processing means cooking or freezing the onions in such a way, or with such other food components, that...

  5. Adverse reactions to drug additives.

    PubMed

    Simon, R A

    1984-10-01

    There is a long list of additives used by the pharmaceutical industry. Most of the agents used have not been implicated in hypersensitivity reactions. Among those that have, only reactions to parabens and sulfites have been well established. Parabens have been shown to be responsible for rare immunoglobulin E-mediated reactions that occur after the use of local anesthetics. Sulfites, which are present in many drugs, including agents commonly used to treat asthma, have been shown to provoke severe asthmatic attacks in sensitive individuals. Recent studies indicate that additives do not play a significant role in "hyperactivity." The role of additives in urticaria is not well established and therefore the incidence of adverse reactions in this patient population is simply not known. In double-blind, placebo-controlled studies, reactions to tartrazine or additives other than sulfites, if they occur at all, are indeed quite rare for the asthmatic population, even for the aspirin-sensitive subpopulation.

  6. Waiting on More than 64 Handles

    DTIC Science & Technology

    2015-10-01

    defined as 64, then some extra code must be written to deal with this. 15. SUBJECT TERMS Handle MAXIMUM_WAIT_OBJECTS...RESPONSIBLE PERSON Tom Nealis a. REPORT U b. ABSTRACT U c. THIS PAGE U 19b. TELEPHONE NUMBER (Include area code ) (973) 724-8048 Standard...one would wait on all the handles produced by spawning a thread for each group. The following sequence is the block of code /algorithm that was

  7. Adverse events in healthcare: learning from mistakes.

    PubMed

    Rafter, N; Hickey, A; Condell, S; Conroy, R; O'Connor, P; Vaughan, D; Williams, D

    2015-04-01

    Large national reviews of patient charts estimate that approximately 10% of hospital admissions are associated with an adverse event (defined as an injury resulting in prolonged hospitalization, disability or death, caused by healthcare management). Apart from having a significant impact on patient morbidity and mortality, adverse events also result in increased healthcare costs due to longer hospital stays. Furthermore, a substantial proportion of adverse events are preventable. Through identifying the nature and rate of adverse events, initiatives to improve care can be developed. A variety of methods exist to gather adverse event data both retrospectively and prospectively but these do not necessarily capture the same events and there is variability in the definition of an adverse event. For example, hospital incident reporting collects only a very small fraction of the adverse events found in retrospective chart reviews. Until there are systematic methods to identify adverse events, progress in patient safety cannot be reliably measured. This review aims to discuss the need for a safety culture that can learn from adverse events, describe ways to measure adverse events, and comment on why current adverse event monitoring is unable to demonstrate trends in patient safety.

  8. Estimation of Handlings for Flexible Cystoscope from Noiseless Cystoscopic Images

    NASA Astrophysics Data System (ADS)

    Kanaya, Jiro; Nakamura, Munehiro; Araki, Masahiro; Yokawa, Hiroshi; Abe, Koji; Kimura, Haruhiko

    With increase of aged people in Japan, cases of diseases in bladder are increased. Hence, incidents of death due to bladder cancer are increasing nowadays. Cystoscope is the most essential tool in examination of bladder. Although CT, MRI, and ultrasonography are painless examinations, they lack in accuracy. There are two kinds of cystoscopes namely rigid and flexible. The examination with the latter one is painless and is used widely. In handling of flexible cystoscope, medical doctors need to observe the whole inner wall of bladder regulating the direction of the tip, rotation on the cystoscope’s axis, and depth of insertion. However, beginners handling this equipment tend to lose track of the observation resulting in poor characteristics of images obtained from the cystoscope. Sometimes they would pass over some parts in the whole bladder. As the preprocessing of a system for thorough observation, this paper proposes a method for estimating the handling techniques of the cystoscope using neural networks to images obtained from the cystoscope.

  9. 7 CFR 959.53 - Handling for special purposes.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Regulating Handling Regulations § 959.53 Handling for special purposes. Regulations in effect pursuant to §§ 959.42, 959.52, or 959.60 may be modified, suspended, or terminated to facilitate handling of...

  10. 7 CFR 929.60 - Handling for special purposes.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... LONG ISLAND IN THE STATE OF NEW YORK Order Regulating Handling Reports and Records § 929.60 Handling... facilitate handling of excess cranberries for the following purposes: (a) Charitable institutions;...

  11. Adverse effects of antihypertensive drugs.

    PubMed

    Husserl, F E; Messerli, F H

    1981-09-01

    Early essential hypertension is asymptomatic and should remain so throughout treatment. In view of the increasing number of available antihypertensive agents, clinicians need to become familiar with the potential side effects of these drugs. By placing more emphasis on non-pharmacological treatment (sodium restriction, weight loss, exercise) and thoroughly evaluating each case in particular, the pharmacological regimen can be optimally tailored to the patient's needs. Potential side effects should be predicted and can often be avoided; if they become clinically significant they should be rapidly recognised and corrected. These side effects can be easily remembered in most instances, as they fall into 3 broad categories: (a) those caused by an exaggerated therapeutic effect; (b) those due to a non-therapeutic pharmacological effect; and (c) those caused by a non-therapeutic, non-pharmacological effect probably representing idiosyncratic reactions. This review focuses mainly on adverse effects of the second and third kind. Each group of drugs in general shares the common side effects of the first two categories, while each individual drug has its own idiosyncratic side effects.

  12. Rethinking the Measurement of Adversity.

    PubMed

    Mersky, Joshua P; Janczewski, Colleen E; Topitzes, James

    2017-02-01

    Research on adverse childhood experiences (ACEs) has unified the study of interrelated risks and generated insights into the origins of disorder and disease. Ten indicators of child maltreatment and household dysfunction are widely accepted as ACEs, but further progress requires a more systematic approach to conceptualizing and measuring ACEs. Using data from a diverse, low-income sample of women who received home visiting services in Wisconsin ( N = 1,241), this study assessed the prevalence of and interrelations among 10 conventional ACEs and 7 potential ACEs: family financial problems, food insecurity, homelessness, parental absence, parent/sibling death, bullying, and violent crime. Associations between ACEs and two outcomes, perceived stress and smoking, were examined. The factor structure and test-retest reliability of ACEs was also explored. As expected, prevalence rates were high compared to studies of more representative samples. Except for parent/sibling death, all ACEs were intercorrelated and associated at the bivariate level with perceived stress and smoking. Exploratory factor analysis confirmed that conventional ACEs loaded on two factors, child maltreatment and household dysfunction, though a more complex four-factor solution emerged once new ACEs were introduced. All ACEs demonstrated acceptable test-retest reliability. Implications and future directions toward a second generation of ACE research are discussed.

  13. OAE: The Ontology of Adverse Events

    PubMed Central

    2014-01-01

    Background A medical intervention is a medical procedure or application intended to relieve or prevent illness or injury. Examples of medical interventions include vaccination and drug administration. After a medical intervention, adverse events (AEs) may occur which lie outside the intended consequences of the intervention. The representation and analysis of AEs are critical to the improvement of public health. Description The Ontology of Adverse Events (OAE), previously named Adverse Event Ontology (AEO), is a community-driven ontology developed to standardize and integrate data relating to AEs arising subsequent to medical interventions, as well as to support computer-assisted reasoning. OAE has over 3,000 terms with unique identifiers, including terms imported from existing ontologies and more than 1,800 OAE-specific terms. In OAE, the term ‘adverse event’ denotes a pathological bodily process in a patient that occurs after a medical intervention. Causal adverse events are defined by OAE as those events that are causal consequences of a medical intervention. OAE represents various adverse events based on patient anatomic regions and clinical outcomes, including symptoms, signs, and abnormal processes. OAE has been used in the analysis of several different sorts of vaccine and drug adverse event data. For example, using the data extracted from the Vaccine Adverse Event Reporting System (VAERS), OAE was used to analyse vaccine adverse events associated with the administrations of different types of influenza vaccines. OAE has also been used to represent and classify the vaccine adverse events cited in package inserts of FDA-licensed human vaccines in the USA. Conclusion OAE is a biomedical ontology that logically defines and classifies various adverse events occurring after medical interventions. OAE has successfully been applied in several adverse event studies. The OAE ontological framework provides a platform for systematic representation and analysis of

  14. Inhaled Diesel Emissions Generated with Cerium Oxide Nanoparticle Fuel Additive Induce Adverse Pulmonary and Systemic Effects

    EPA Science Inventory

    Diesel exhaust (DE) exposure induces adverse cardiopulmonary effects. Cerium oxide nanoparticles added to diesel fuel (DECe) increases fuel burning efficiency but leads to altered emission characteristics and potentially altered health effects. Here, we evaluated whether DECe res...

  15. Handling Practices of Fresh Leafy Greens in Restaurants: Receiving and Training†

    PubMed Central

    COLEMAN, ERIK; DELEA, KRISTIN; EVERSTINE, KAREN; REIMANN, DAVID; RIPLEY, DANNY

    2015-01-01

    Multiple foodborne illness outbreaks have been associated with the consumption of fresh produce. Investigations have indicated that microbial contamination throughout the farm-to-fork continuum often contributed to these outbreaks. Researchers have hypothesized that handling practices for leafy greens in restaurants may support contamination by and proliferation and amplification of pathogens that cause foodborne illness outbreaks. However, limited data are available on how workers handle leafy greens in restaurants. The purpose of this study was to collect descriptive data on handling practices of leafy greens in restaurants, including restaurant characteristics, types of leafy greens used, produce receipt, and food safety training and certification. As a federal collaborative partner with the Environmental Health Specialists Network (EHS-Net) of the Centers for Disease Control and Prevention, the U.S. Food and Drug Administration (FDA) recommended that EHS-Net participants survey handling practices for leafy greens in restaurants. The recommendations in the FDA’s Guide to Minimize Microbial Food Safety Hazards of Leafy Greens are significant to this study for comparison of the results. The survey revealed that appropriate handling procedures assist in the mitigation of other unsafe handling practices for leafy greens. These results are significant because the FDA guidance for the safe handling of leafy greens was not available until 2009, after the survey had been completed. The information provided from this study can be used to promote additional efforts that will assist in developing interventions to prevent future foodborne illness outbreaks associated with leafy greens. PMID:24290691

  16. Preliminary Safety Design Report for Remote Handled Low-Level Waste Disposal Facility

    SciTech Connect

    Timothy Solack; Carol Mason

    2012-03-01

    A new onsite, remote-handled low-level waste disposal facility has been identified as the highest ranked alternative for providing continued, uninterrupted remote-handled low-level waste disposal for remote-handled low-level waste from the Idaho National Laboratory and for nuclear fuel processing activities at the Naval Reactors Facility. Historically, this type of waste has been disposed of at the Radioactive Waste Management Complex. Disposal of remote-handled low-level waste in concrete disposal vaults at the Radioactive Waste Management Complex will continue until the facility is full or until it must be closed in preparation for final remediation of the Subsurface Disposal Area (approximately at the end of Fiscal Year 2017). This preliminary safety design report supports the design of a proposed onsite remote-handled low-level waste disposal facility by providing an initial nuclear facility hazard categorization, by discussing site characteristics that impact accident analysis, by providing the facility and process information necessary to support the hazard analysis, by identifying and evaluating potential hazards for processes associated with onsite handling and disposal of remote-handled low-level waste, and by discussing the need for safety features that will become part of the facility design.

  17. Handling performance control for hybrid 8-wheel-drive vehicle and simulation verification

    NASA Astrophysics Data System (ADS)

    Ni, Jun; Hu, Jibin

    2016-08-01

    In order to improve handling performance of a hybrid 8-Wheel-Drive vehicle, the handling performance control strategy was proposed. For armoured vehicle, besides handling stability in high speed, the minimum steer radius in low speed is also a key tactical and technical index. Based on that, the proposed handling performance control strategy includes 'Handling Stability' and 'Radius Minimization' control modes. In 'Handling Stability' control mode, 'Neutralsteer Radio' is defined to adjust the steering characteristics to satisfy different demand in different speed range. In 'Radius Minimization' control mode, the independent motors are controlled to provide an additional yaw moment to decrease the minimum steer radius. In order to verify the strategy, a simulation platform was built including engine and continuously variable transmission systems, generator and battery systems, independent motors and controllers systems, vehicle dynamic and tyre mechanical systems. The simulation results show that the handling performance of the vehicle can be enhanced significantly, and the minimum steer radius can be decreased by 20% which is significant improvement compared to the common level of main battle armoured vehicle around the world.

  18. Handling practices of fresh leafy greens in restaurants: receiving and training.

    PubMed

    Coleman, Erik; Delea, Kristin; Everstine, Karen; Reimann, David; Ripley, Danny

    2013-12-01

    Multiple foodborne illness outbreaks have been associated with the consumption of fresh produce. Investigations have indicated that microbial contamination throughout the farm-to-fork continuum often contributed to these outbreaks. Researchers have hypothesized that handling practices for leafy greens in restaurants may support contamination by and proliferation and amplification of pathogens that cause foodborne illness outbreaks. However, limited data are available on how workers handle leafy greens in restaurants. The purpose of this study was to collect descriptive data on handling practices of leafy greens in restaurants, including restaurant characteristics, types of leafy greens used, produce receipt, and food safety training and certification. As a federal collaborative partner with the Environmental Health Specialists Network (EHS-Net) of the Centers for Disease Control and Prevention, the U.S. Food and Drug Administration (FDA) recommended that EHS-Net participants survey handling practices for leafy greens in restaurants. The recommendations in the FDA's Guide to Minimize Microbial Food Safety Hazards of Leafy Greens are significant to this study for comparison of the results. The survey revealed that appropriate handling procedures assist in the mitigation of other unsafe handling practices for leafy greens. These results are significant because the FDA guidance for the safe handling of leafy greens was not available until 2009, after the survey had been completed. The information provided from this study can be used to promote additional efforts that will assist in developing interventions to prevent future foodborne illness outbreaks associated with leafy greens.

  19. Standardizing the Handling of Surgical Specimens.

    PubMed

    Shirey, Cheryl; Perrego, Kristen

    2015-11-01

    To standardize the handling of surgical specimens, the OR clinical educators in a community hospital setting devised a series of departmental changes as a quality improvement project. A newly created skill validation was reviewed in an hour-long educational meeting with all OR staff members. In addition to creating a new annual skill validation, discussions about specimens were included in the hand over, the time out, and a newly instituted debriefing tool to be used toward the end of a procedure. This interdisciplinary group devised interventions to improve the process of handling specimens such as standardizing the labeling process and changing the transparency of the specimen container. The goal was to assure standardization of specimen handling, specifically to assist novice staff members, and to harmonize inconsistencies between specialties within the practice of existing staff members. These combined methods helped to ensure accurate communication and procurement of specimens for all procedures.

  20. Automated system for handling tritiated mixed waste

    SciTech Connect

    Dennison, D.K.; Merrill, R.D.; Reitz, T.C.

    1995-03-01

    Lawrence Livermore National Laboratory (LLNL) is developing a semi system for handling, characterizing, processing, sorting, and repackaging hazardous wastes containing tritium. The system combines an IBM-developed gantry robot with a special glove box enclosure designed to protect operators and minimize the potential release of tritium to the atmosphere. All hazardous waste handling and processing will be performed remotely, using the robot in a teleoperational mode for one-of-a-kind functions and in an autonomous mode for repetitive operations. Initially, this system will be used in conjunction with a portable gas system designed to capture any gaseous-phase tritium released into the glove box. This paper presents the objectives of this development program, provides background related to LLNL`s robotics and waste handling program, describes the major system components, outlines system operation, and discusses current status and plans.

  1. DOE handbook: Tritium handling and safe storage

    SciTech Connect

    1999-03-01

    The DOE Handbook was developed as an educational supplement and reference for operations and maintenance personnel. Most of the tritium publications are written from a radiological protection perspective. This handbook provides more extensive guidance and advice on the null range of tritium operations. This handbook can be used by personnel involved in the full range of tritium handling from receipt to ultimate disposal. Compliance issues are addressed at each stage of handling. This handbook can also be used as a reference for those individuals involved in real time determination of bounding doses resulting from inadvertent tritium releases. This handbook provides useful information for establishing processes and procedures for the receipt, storage, assay, handling, packaging, and shipping of tritium and tritiated wastes. It includes discussions and advice on compliance-based issues and adds insight to those areas that currently possess unclear DOE guidance.

  2. Adverse drug events in hospital: pilot study with trigger tool

    PubMed Central

    Rozenfeld, Suely; Giordani, Fabiola; Coelho, Sonia

    2013-01-01

    OBJECTIVE To estimate the frequency of and to characterize the adverse drug events at a terciary care hospital. METHODS A retrospective review was carried out of 128 medical records from a hospital in Rio de Janeiro in 2007, representing 2,092 patients. The instrument used was a list of triggers, such as antidotes, abnormal laboratory analysis results and sudden suspension of treatment, among others. A simple random sample of patients aged 15 and over was extracted. Oncologic and obstetric patients were excluded as were those hospitalized for less than 48 hours or in the emergency room. Social and demographic characteristics and those of the disease of patients who underwent adverse events were compared with those of patients who did not in order to test for differences between the groups. RESULTS Around 70.0% of the medical records assessed showed at least one trigger. Adverse drug events triggers had an overall positive predictive value of 14.4%. The incidence of adverse drug events was 26.6 per 100 patients and 15.6% patients suffered one or more event. The median length of stay for patients suffering an adverse drug event was 35.2 days as against 10.7 days for those who did not (p < 0.01). The pharmacological classes most commonly associated with an adverse drug event were related to the cardiovascular system, nervous system and alimentary tract and metabolism. The most common active substances associated with an adverse drug event were tramadol, dypirone, glibenclamide and furosemide. Over 80.0% of events provoked or contributed to temporary harm to the patient and required intervention and 6.0% may have contributed to the death of the patient. It was estimated that in the hospital, 131 events involving drowsiness or fainting 33 involving falls, and 33 episodes of hemorrhage related to adverse drug effects occur annually. CONCLUSIONS Almost one-sixth of in-patients (16,0%) suffered an adverse drug event. The instrument used may prove useful as a technique for

  3. Hospital deaths and adverse events in Brazil

    PubMed Central

    2011-01-01

    Background Adverse events are considered a major international problem related to the performance of health systems. Evaluating the occurrence of adverse events involves, as any other outcome measure, determining the extent to which the observed differences can be attributed to the patient's risk factors or to variations in the treatment process, and this in turn highlights the importance of measuring differences in the severity of the cases. The current study aims to evaluate the association between deaths and adverse events, adjusted according to patient risk factors. Methods The study is based on a random sample of 1103 patient charts from hospitalizations in the year 2003 in 3 teaching hospitals in the state of Rio de Janeiro, Brazil. The methodology involved a retrospective review of patient charts in two stages - screening phase and evaluation phase. Logistic regression was used to evaluate the relationship between hospital deaths and adverse events. Results The overall mortality rate was 8.5%, while the rate related to the occurrence of an adverse event was 2.9% (32/1103) and that related to preventable adverse events was 2.3% (25/1103). Among the 94 deaths analyzed, 34% were related to cases involving adverse events, and 26.6% of deaths occurred in cases whose adverse events were considered preventable. The models tested showed good discriminatory capacity. The unadjusted odds ratio (OR 11.43) and the odds ratio adjusted for patient risk factors (OR 8.23) between death and preventable adverse event were high. Conclusions Despite discussions in the literature regarding the limitations of evaluating preventable adverse events based on peer review, the results presented here emphasize that adverse events are not only prevalent, but are associated with serious harm and even death. These results also highlight the importance of risk adjustment and multivariate models in the study of adverse events. PMID:21929810

  4. Construction and operation of replacement hazardous waste handling facility at Lawrence Berkeley Laboratory. Environmental Assessment

    SciTech Connect

    Not Available

    1992-09-01

    The US Department of Energy (DOE) has prepared an environmental assessment (EA), DOE/EA-0423, for the construction and operation of a replacement hazardous waste handling facility (HWHF) and decontamination of the existing HWHF at Lawrence Berkeley Laboratory (LBL), Berkeley, California. The proposed facility would replace several older buildings and cargo containers currently being used for waste handling activities and consolidate the LBL`s existing waste handling activities in one location. The nature of the waste handling activities and the waste volume and characteristics would not change as a result of construction of the new facility. Based on the analysis in the EA, DOE has determined that the proposed action would not constitute a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969, 42 USC. 4321 et seq. Therefore, an environmental impact statement is not required.

  5. A Few Comments on Visual Systems of Ship Handling Simulator for Sea Pilot's Training

    NASA Astrophysics Data System (ADS)

    Murai, Koji; Okazaki, Tadatsugi; Hayashi, Yuji

    We are using a ship handling simulator for sea pilot's training; however, in case of entering a port, it is not enough for a visual image around own ship. The general ship handling simulator does not have the visual image (screen) around own ship. We challenge to clear the effect of a visual system around own ship for entering a port. The training for entering a port is one of important training factor for a sea pilot. This paper describes characteristics of captain's visual observation area and the mental workload for ship handling when entering a port. The visual observation area comes from eye movement and the mental workload comes from heart rate variability (R-R interval), nasal temperature. The results show that the visual system around own ship gives their safe ship handling for entering a port based on eye movement.

  6. A design procedure for the handling qualities optimization of the X-29A aircraft

    NASA Technical Reports Server (NTRS)

    Bosworth, John T.; Cox, Timothy H.

    1989-01-01

    A design technique for handling qualities improvement was developed for the X-29A aircraft. As with any new aircraft, the X-29A control law designers were presented with a relatively high degree of uncertainty in their mathematical models. The presence of uncertainties, and the high level of static instability of the X-29A caused the control law designers to stress stability and robustness over handling qualities. During flight test, the mathematical models of the vehicle were validated or corrected to match the vehicle dynamic behavior. The updated models were then used to fine tune the control system to provide fighter-like handling characteristics. A design methodology was developed which works within the existing control system architecture to provide improved handling qualities and acceptable stability with a minimum of cost in both implementation as well as software verification and validation.

  7. Planetary sample rapid recovery and handling

    NASA Technical Reports Server (NTRS)

    1985-01-01

    Methods for recovering and cost effectively handling planetary samples following return to the vicinity of Earth were designed for planetary mission planners. Three topics are addressed: (1) a rough cost estimate was produced for each of a series of options for the handling of planetary samples following their return to the vicinity of Earth; (2) the difficulty of quickly retrieving planetary samples from low circular and high elliptical Earth orbit is assessed; and (3) a conceptual design for a biological isolation and thermal control system for the returned sample and spacecraft is developed.

  8. Options in Extraterrestrial Sample Handling and Study

    NASA Technical Reports Server (NTRS)

    Papanastassiou, Dimitri A.

    2000-01-01

    This presentation mentions important service functions such as: sample preservation, hazard assessment, and handling. It also discuss how preliminary examination of samples is necessary for sample hazard assessment and for sample allocations. Clean facilities and clean sample handling are required. Conflicts, cross contamination issues will be present and need to be resolved. Extensive experience is available for extraterrestrial samples and must be sought and applied. Extensive experience is available in studies of pathogenicity and must be sought and applied as necessary. Advisory and oversight structures must also be in place

  9. WASTE HANDLING BUILDING VENTILATION SYSTEM DESCRIPTION DOCUMENT

    SciTech Connect

    P.A. Kumar

    2000-06-21

    The Waste Handling Building Ventilation System provides heating, ventilation, and air conditioning (HVAC) for the contaminated, potentially contaminated, and uncontaminated areas of the Monitored Geologic Repository's (MGR) Waste Handling Building (WHB). In the uncontaminated areas, the non-confinement area ventilation system maintains the proper environmental conditions for equipment operation and personnel comfort. In the contaminated and potentially contaminated areas, in addition to maintaining the proper environmental conditions for equipment operation and personnel comfort, the contamination confinement area ventilation system directs potentially contaminated air away from personnel in the WHB and confines the contamination within high-efficiency particulate air (HEPA) filtration units. The contamination confinement areas ventilation system creates airflow paths and pressure zones to minimize the potential for spreading contamination within the building. The contamination confinement ventilation system also protects the environment and the public by limiting airborne releases of radioactive or other hazardous contaminants from the WHB. The Waste Handling Building Ventilation System is designed to perform its safety functions under accident conditions and other Design Basis Events (DBEs) (such as earthquakes, tornadoes, fires, and loss of the primary electric power). Additional system design features (such as compartmentalization with independent subsystems) limit the potential for cross-contamination within the WHB. The system provides status of important system parameters and equipment operation, and provides audible and/or visual indication of off-normal conditions and equipment failures. The Waste Handling Building Ventilation System confines the radioactive and hazardous material within the building such that the release rates comply with regulatory limits. The system design, operations, and maintenance activities incorporate ALARA (as low as is

  10. Idiosyncratic Adverse Drug Reactions: Current Concepts

    PubMed Central

    Naisbitt, Dean J.

    2013-01-01

    Idiosyncratic drug reactions are a significant cause of morbidity and mortality for patients; they also markedly increase the uncertainty of drug development. The major targets are skin, liver, and bone marrow. Clinical characteristics suggest that IDRs are immune mediated, and there is substantive evidence that most, but not all, IDRs are caused by chemically reactive species. However, rigorous mechanistic studies are very difficult to perform, especially in the absence of valid animal models. Models to explain how drugs or reactive metabolites interact with the MHC/T-cell receptor complex include the hapten and P-I models, and most recently it was found that abacavir can interact reversibly with MHC to alter the endogenous peptides that are presented to T cells. The discovery of HLA molecules as important risk factors for some IDRs has also significantly contributed to our understanding of these adverse reactions, but it is not yet clear what fraction of IDRs have a strong HLA dependence. In addition, with the exception of abacavir, most patients who have the HLA that confers a higher IDR risk with a specific drug will not have an IDR when treated with that drug. Interindividual differences in T-cell receptors and other factors also presumably play a role in determining which patients will have an IDR. The immune response represents a delicate balance, and immune tolerance may be the dominant response to a drug that can cause IDRs. PMID:23476052

  11. Characterizing "Adversity" of Pathology Findings in ...

    EPA Pesticide Factsheets

    The identification of adverse health effects has a central role in the development and risk/safety assessment of chemical entities and pharmaceuticals. There is currently a need for better alignment in the toxicologic pathology community regarding how nonclinical adversity is determined and characterized. The European Society of Toxicologic Pathology (ESTP) therefore coordinated a workshop in June 2015 to review available definitions of adversity, weigh determining and qualifying factors of adversity based on case examples, and recommend a practical approach to define and characterize adversity in toxicology reports. The international group of expert pathologists and toxicologists emphasized that a holistic, weight-of-evidence, case-specific approach should be followed for each adversity assessment. It was recommended that nonclinical adversity should typically be determined at a morphological level (most often the organ) in the pathology report and should refer specifically to the test species. Final adversity calls, integration of target pharmacology/pathway information, and consideration of human translation should generally be made in toxicology overview reports. Differences in interpretation and implications of adversity calls between (agro)chemical and pharmaceutical industries and among world regions were highlighted. The results of this workshop should serve a valuable prerequisite for future organ- or lesion-specific workshops planned by the ESTP. This

  12. Recommendations for cask features for robotic handling from the Advanced Handling Technology Project

    SciTech Connect

    Drotning, W.

    1991-02-01

    This report describes the current status and recent progress in the Advanced Handling Technology Project (AHTP) initiated to explore the use of advanced robotic systems and handling technologies to perform automated cask handling operations at radioactive waste handling facilities, and to provide guidance to cask designers on the impact of robotic handling on cask design. Current AHTP tasks have developed system mock-ups to investigate robotic manipulation of impact limiters and cask tiedowns. In addition, cask uprighting and transport, using computer control of a bridge crane and robot, were performed to demonstrate the high speed cask transport operation possible under computer control. All of the current AHTP tasks involving manipulation of impact limiters and tiedowns require robotic operations using a torque wrench. To perform these operations, a pneumatic torque wrench and control system were integrated into the tool suite and control architecture of the gantry robot. The use of captured fasteners is briefly discussed as an area where alternative cask design preferences have resulted from the influence of guidance for robotic handling vs traditional operations experience. Specific robotic handling experiences with these system mock-ups highlight a number of continually recurring design principles: (1) robotic handling feasibility is improved by mechanical designs which emphasize operation with limited dexterity in constrained workspaces; (2) clearances, tolerances, and chamfers must allow for operations under actual conditions with consideration for misalignment and imprecise fixturing; (3) successful robotic handling is enhanced by including design detail in representations for model-based control; (4) robotic handling and overall quality assurance are improved by designs which eliminate the use of loose, disassembled parts. 8 refs., 15 figs.

  13. 41 CFR 101-25.405 - Materials handling equipment.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Materials handling...-Replacement Standards § 101-25.405 Materials handling equipment. (a) Materials handling equipment will not be... materials handling equipment in storage, one month in storage equals 50 hours of operation. (ii) The...

  14. 7 CFR 945.9 - Ship or handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Ship or handle. 945.9 Section 945.9 Agriculture... DESIGNATED COUNTIES IN IDAHO, AND MALHEUR COUNTY, OREGON Order Regulating Handling Definitions § 945.9 Ship or handle. Ship or handle means to pack, sell, consign, transport or in any other way to...

  15. 7 CFR 945.9 - Ship or handle.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false Ship or handle. 945.9 Section 945.9 Agriculture... DESIGNATED COUNTIES IN IDAHO, AND MALHEUR COUNTY, OREGON Order Regulating Handling Definitions § 945.9 Ship or handle. Ship or handle means to pack, sell, consign, transport or in any other way to...

  16. 7 CFR 948.8 - Handle or ship.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Handle or ship. 948.8 Section 948.8 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Order Regulating Handling Definitions § 948.8 Handle or ship. Handle or ship means to transport,...

  17. 7 CFR 927.8 - Ship or handle.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Ship or handle. 927.8 Section 927.8 Agriculture... Order Regulating Handling Definitions § 927.8 Ship or handle. Ship or handle means to sell, deliver, consign, transport or ship pears within the production area or between the production area and any...

  18. 7 CFR 927.8 - Ship or handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Ship or handle. 927.8 Section 927.8 Agriculture... Order Regulating Handling Definitions § 927.8 Ship or handle. Ship or handle means to sell, deliver, consign, transport or ship pears within the production area or between the production area and any...

  19. 7 CFR 927.8 - Ship or handle.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false Ship or handle. 927.8 Section 927.8 Agriculture... Order Regulating Handling Definitions § 927.8 Ship or handle. Ship or handle means to sell, deliver, consign, transport or ship pears within the production area or between the production area and any...

  20. 7 CFR 905.9 - Handle or ship.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Handle or ship. 905.9 Section 905.9 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... TANGELOS GROWN IN FLORIDA Order Regulating Handling Definitions § 905.9 Handle or ship. Handle or...

  1. 7 CFR 948.8 - Handle or ship.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Handle or ship. 948.8 Section 948.8 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... Order Regulating Handling Definitions § 948.8 Handle or ship. Handle or ship means to transport,...

  2. 7 CFR 945.9 - Ship or handle.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Ship or handle. 945.9 Section 945.9 Agriculture... DESIGNATED COUNTIES IN IDAHO, AND MALHEUR COUNTY, OREGON Order Regulating Handling Definitions § 945.9 Ship or handle. Ship or handle means to pack, sell, consign, transport or in any other way to...

  3. 7 CFR 905.9 - Handle or ship.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false Handle or ship. 905.9 Section 905.9 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... TANGELOS GROWN IN FLORIDA Order Regulating Handling Definitions § 905.9 Handle or ship. Handle or...

  4. 7 CFR 948.8 - Handle or ship.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Handle or ship. 948.8 Section 948.8 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Order Regulating Handling Definitions § 948.8 Handle or ship. Handle or ship means to transport,...

  5. 7 CFR 905.9 - Handle or ship.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Handle or ship. 905.9 Section 905.9 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... TANGELOS GROWN IN FLORIDA Order Regulating Handling Definitions § 905.9 Handle or ship. Handle or...

  6. 7 CFR 948.8 - Handle or ship.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Handle or ship. 948.8 Section 948.8 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Order Regulating Handling Definitions § 948.8 Handle or ship. Handle or ship means to transport,...

  7. 7 CFR 905.9 - Handle or ship.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Handle or ship. 905.9 Section 905.9 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... TANGELOS GROWN IN FLORIDA Order Regulating Handling Definitions § 905.9 Handle or ship. Handle or...

  8. 7 CFR 905.9 - Handle or ship.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Handle or ship. 905.9 Section 905.9 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... TANGELOS GROWN IN FLORIDA Order Regulating Handling Definitions § 905.9 Handle or ship. Handle or...

  9. 7 CFR 948.8 - Handle or ship.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false Handle or ship. 948.8 Section 948.8 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... Order Regulating Handling Definitions § 948.8 Handle or ship. Handle or ship means to transport,...

  10. 7 CFR 927.8 - Ship or handle.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Ship or handle. 927.8 Section 927.8 Agriculture... Order Regulating Handling Definitions § 927.8 Ship or handle. Ship or handle means to sell, deliver, consign, transport or ship pears within the production area or between the production area and any...

  11. 7 CFR 945.9 - Ship or handle.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Ship or handle. 945.9 Section 945.9 Agriculture... DESIGNATED COUNTIES IN IDAHO, AND MALHEUR COUNTY, OREGON Order Regulating Handling Definitions § 945.9 Ship or handle. Ship or handle means to pack, sell, consign, transport or in any other way to...

  12. 7 CFR 927.8 - Ship or handle.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Ship or handle. 927.8 Section 927.8 Agriculture... Order Regulating Handling Definitions § 927.8 Ship or handle. Ship or handle means to sell, deliver, consign, transport or ship pears within the production area or between the production area and any...

  13. 7 CFR 945.9 - Ship or handle.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Ship or handle. 945.9 Section 945.9 Agriculture... DESIGNATED COUNTIES IN IDAHO, AND MALHEUR COUNTY, OREGON Order Regulating Handling Definitions § 945.9 Ship or handle. Ship or handle means to pack, sell, consign, transport or in any other way to...

  14. Remote-handled transuranic system assessment appendices. Volume 2

    SciTech Connect

    1995-11-01

    Volume 2 of this report contains six appendices to the report: Inventory and generation of remote-handled transuranic waste; Remote-handled transuranic waste site storage; Characterization of remote-handled transuranic waste; RH-TRU waste treatment alternatives system analysis; Packaging and transportation study; and Remote-handled transuranic waste disposal alternatives.

  15. 9 CFR 3.66 - Handling.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment and Transportation of Rabbits... moves live rabbits from an animal holding area of a terminal facility to a primary conveyance or vice... regulations and holding any live rabbit in an animal holding area of a terminal facility or transporting...

  16. Biodiesel Handling and Use Guide (Fifth Edition)

    SciTech Connect

    Alleman, Teresa L.; McCormick, Robert L.; Christensen, Earl D.; Fioroni, Gina; Moriarty, Kristi; Yanowitz, Janet

    2016-11-08

    This document is a guide for those who blend, distribute, and use biodiesel and biodiesel blends. It provides basic information on the proper and safe use of biodiesel and biodiesel blends in engines and boilers, and is intended to help fleets, individual users, blenders, distributors, and those involved in related activities understand procedures for handling and using biodiesel fuels.

  17. 7 CFR 945.341 - Handling regulation.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ..., chips, shoestrings, starch, and flour. It includes only that preparation of potatoes for market which... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE IRISH POTATOES GROWN IN CERTAIN.... No person shall handle any lot of potatoes unless such potatoes meet the requirements of...

  18. 7 CFR 945.341 - Handling regulation.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ..., chips, shoestrings, starch, and flour. It includes only that preparation of potatoes for market which... AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE IRISH POTATOES GROWN IN CERTAIN.... No person shall handle any lot of potatoes unless such potatoes meet the requirements of...

  19. 7 CFR 945.341 - Handling regulation.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ..., chips, shoestrings, starch, and flour. It includes only that preparation of potatoes for market which... AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE IRISH POTATOES GROWN IN CERTAIN.... No person shall handle any lot of potatoes unless such potatoes meet the requirements of...

  20. 'Safe handling of nanotechnology' ten years on

    NASA Astrophysics Data System (ADS)

    Maynard, Andrew D.; Aitken, Robert J.

    2016-12-01

    In 2006, a group of scientists proposed five grand challenges to support the safe handling of nanotechnology. Ten years on, Andrew Maynard and Robert Aitken -- two of the original authors -- look at where we have come, and where we still need to go.

  1. 7 CFR 983.14 - Handle.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Handle. 983.14 Section 983.14 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE PISTACHIOS GROWN IN CALIFORNIA, ARIZONA,...

  2. 7 CFR 983.14 - Handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Handle. 983.14 Section 983.14 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE PISTACHIOS GROWN IN CALIFORNIA, ARIZONA,...

  3. 7 CFR 906.7 - Handle.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Handle. 906.7 Section 906.7 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE ORANGES AND GRAPEFRUIT GROWN IN LOWER...

  4. Hoisting frame facilitates handling of large objects

    NASA Technical Reports Server (NTRS)

    Colpean, K. V.; Holcomb, D. F.

    1968-01-01

    Hoisting frame can be used with a standard 5-ton forklift to handle the large spreader bars, or other bulky pieces of equipment, much faster and more efficiently than with a boom or gantry crane. In addition forklifts of this type are more readily available.

  5. Goods handling: tugs, trailers and tractors.

    PubMed

    Grayson, H

    1980-09-26

    Ease of handling ought to be a priority in any supply and disposal system. Hazel Grayson, senior research officer at the Medical Architecture Research Unit, Polytechnic of North London, suggests that even where driver-operated electric tow tractors cannot be used, other types of electric pulling device should be considered.

  6. 9 CFR 3.142 - Handling.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Warmblooded Animals Other Than Dogs, Cats, Rabbits, Hamsters, Guinea Pigs, Nonhuman Primates, and Marine... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling. 3.142 Section 3.142 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE...

  7. 9 CFR 3.142 - Handling.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Warmblooded Animals Other Than Dogs, Cats, Rabbits, Hamsters, Guinea Pigs, Nonhuman Primates, and Marine... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Handling. 3.142 Section 3.142 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE...

  8. 9 CFR 3.142 - Handling.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Warmblooded Animals Other Than Dogs, Cats, Rabbits, Hamsters, Guinea Pigs, Nonhuman Primates, and Marine... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Handling. 3.142 Section 3.142 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE...

  9. The Computer Subroutine in Information Handling.

    ERIC Educational Resources Information Center

    Riggs, Donald E.

    Generalized computational subroutines can reduce programing repetitions and wasteful computer storage use. The most useful are those that are flexible enough to handle a wide variety of situations. Subroutines may have details open to change in order to blend into the main program. They may be built into the computer library or supplied by the…

  10. 7 CFR 996.40 - Handling standards.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Handling standards. 996.40 Section 996.40 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE MINIMUM QUALITY AND...

  11. Flexible Phrase Based Query Handling Algorithms.

    ERIC Educational Resources Information Center

    Wilbur, W. John; Kim, Won

    2001-01-01

    Flexibility in query handling can be important if one types a search engine query that is misspelled, contains terms not in the database, or requires knowledge of a controlled vocabulary. Presents results of experiments that suggest the optimal form of similarity functions that are applicable to the task of phrase based retrieval to find either…

  12. 9 CFR 3.41 - Handling.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Pigs and Hamsters Transportation Standards § 3.41 Handling. (a) Any person who is subject to the Animal Welfare regulations and who moves live guinea pigs or hamsters from an animal holding area of a terminal... person subject to the Animal Welfare Act and holding any live guinea pig or hamster in an animal...

  13. 7 CFR 917.6 - Handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., That the term handle shall not include the sale of fruit on the tree, the transportation within the... Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE FRESH PEARS AND PEACHES GROWN IN CALIFORNIA..., consign, deliver or transport fruit or to cause fruit to be sold, consigned, delivered or...

  14. Intertextuality for Handling Complex Environmental Issues

    ERIC Educational Resources Information Center

    Byhring, Anne Kristine; Knain, Erik

    2016-01-01

    Nowhere is the need for handling complexity more pertinent than in addressing environmental issues. Our study explores students' situated constructs of complexity in unfolding discourses on socio-scientific issues. Students' dialogues in two group-work episodes are analysed in detail, with tools from Systemic Functional Linguistics. We identify…

  15. 7 CFR 927.316 - Handling regulation.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Handling regulation. 927.316 Section 927.316 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... lowered to 35 degrees Fahrenheit or less and any such pears have an average pressure test of 14 pounds...

  16. 7 CFR 985.152 - Handling report.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... the handler's agent also shall include the applicable information on the back of the producer's Annual... 7 Agriculture 8 2010-01-01 2010-01-01 false Handling report. 985.152 Section 985.152 Agriculture... report. Whenever an allotment percentage has been established for a class of oil, each handler...

  17. 7 CFR 1212.8 - Handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND..., PROMOTION, CONSUMER EDUCATION AND INDUSTRY INFORMATION ORDER Honey Packers and Importers Research, Promotion, Consumer Education, and Industry Information Order Definitions § 1212.8 Handle. “Handle” means to...

  18. 9 CFR 3.41 - Handling.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Pigs and Hamsters Transportation Standards § 3.41 Handling. (a) Any person who is subject to the Animal Welfare regulations and who moves live guinea pigs or hamsters from an animal holding area of a terminal... person subject to the Animal Welfare Act and holding any live guinea pig or hamster in an animal...

  19. 7 CFR 917.6 - Handle.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Handle. 917.6 Section 917.6 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE FRESH PEARS AND PEACHES GROWN IN...

  20. 7 CFR 917.6 - Handle.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Handle. 917.6 Section 917.6 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE FRESH PEARS AND PEACHES GROWN IN...

  1. 7 CFR 917.6 - Handle.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false Handle. 917.6 Section 917.6 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE FRESH PEARS AND PEACHES GROWN IN...

  2. 7 CFR 917.6 - Handle.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Handle. 917.6 Section 917.6 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE FRESH PEARS AND PEACHES GROWN IN...

  3. 7 CFR 993.13 - Handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Handle. 993.13 Section 993.13 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and..., or ship (except as a carrier of prunes owned by another person), or in any other way to place...

  4. 7 CFR 985.8 - Handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE MARKETING ORDER REGULATING THE HANDLING OF..., transport, or ship (except as a common or contract carrier of oil owned by another), or otherwise place...

  5. Math Model for Naval Ship Handling Trainer.

    ERIC Educational Resources Information Center

    Golovcsenko, Igor V.

    The report describes the math model for an experimental ship handling trainer. The training task is that of a replenishment operation at sea. The model includes equations for ship dynamics of a destroyer, propeller-engine response times, ship separation, interaction effects between supply ship and destroyer, and outputs to a visual display system.…

  6. 9 CFR 3.19 - Handling.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Cats 1 Transportation Standards § 3.19 Handling. (a) Any person subject to the Animal Welfare regulations (9 CFR parts 1, 2, and 3) who moves (including loading and unloading) dogs or cats within, to, or... efficiently as possible and must provide the following during movement of the dog or cat: (1) Shelter...

  7. 9 CFR 3.19 - Handling.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Cats 1 Transportation Standards § 3.19 Handling. (a) Any person subject to the Animal Welfare regulations (9 CFR parts 1, 2, and 3) who moves (including loading and unloading) dogs or cats within, to, or... efficiently as possible and must provide the following during movement of the dog or cat: (1) Shelter...

  8. 9 CFR 3.19 - Handling.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Cats 1 Transportation Standards § 3.19 Handling. (a) Any person subject to the Animal Welfare regulations (9 CFR parts 1, 2, and 3) who moves (including loading and unloading) dogs or cats within, to, or... efficiently as possible and must provide the following during movement of the dog or cat: (1) Shelter...

  9. 9 CFR 3.19 - Handling.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Cats 1 Transportation Standards § 3.19 Handling. (a) Any person subject to the Animal Welfare regulations (9 CFR parts 1, 2, and 3) who moves (including loading and unloading) dogs or cats within, to, or... efficiently as possible and must provide the following during movement of the dog or cat: (1) Shelter...

  10. 9 CFR 3.19 - Handling.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Cats 1 Transportation Standards § 3.19 Handling. (a) Any person subject to the Animal Welfare regulations (9 CFR parts 1, 2, and 3) who moves (including loading and unloading) dogs or cats within, to, or... efficiently as possible and must provide the following during movement of the dog or cat: (1) Shelter...

  11. 340 waste handling facility interim safety basis

    SciTech Connect

    VAIL, T.S.

    1999-04-01

    This document presents an interim safety basis for the 340 Waste Handling Facility classifying the 340 Facility as a Hazard Category 3 facility. The hazard analysis quantifies the operating safety envelop for this facility and demonstrates that the facility can be operated without a significant threat to onsite or offsite people.

  12. Strategic approaches to adverse outcome pathway development

    EPA Science Inventory

    Adverse outcome pathways (AOPs) are conceptual frameworks for organizing biological and toxicological knowledge in a manner that supports extrapolation of data pertaining to the initiation or early progression of toxicity to an apical adverse outcome that occurs at a level of org...

  13. Data handling and representation of freeform surfaces

    NASA Astrophysics Data System (ADS)

    Steinkopf, Ralf; Dick, Lars; Kopf, Tino; Gebhardt, Andreas; Risse, Stefan; Eberhardt, Ramona

    2011-10-01

    Freeform surfaces enable innovative optics. They are not limited by axis symmetry and hence they are almost free in design. They are used to reduce the installation space and enhance the performance of optical elements. State of the art optical design tools are computing with powerful algorithms to simulate freeform surfaces. Even new mathematical approaches are under development /1/. In consequence, new optical designs /2/ are pushing the development of manufacturing processes consequently and novel types of datasets have to proceed through the process chain /3/. The complexity of these data is the huge challenge for the data handling. Because of the asymmetrical and 3-dimensional surfaces of freeforms, large data volumes have to be created, trimmed, extended and fitted. All these processes must be performed without losing the accuracy of the original design data. Additionally, manifold types of geometries results in different kinds of mathematical representations of freeform surfaces and furthermore the used CAD/CAM tools are dealing with a set of spatial transport formats. These are all reasons why manufacture-oriented approaches for the freeform data handling are not yet sufficiently developed. This paper suggests a classification of freeform surfaces based on the manufacturing methods which are offered by diamond machining. The different manufacturing technologies, ranging from servo-turning to shaping, require a differentiated approach for the data handling process. The usage of analytical descriptions in form of splines and polynomials as well as the application of discrete descriptions like point clouds is shown in relation to the previously made classification. Advantages and disadvantages of freeform representations are discussed. Aspects of the data handling in between different process steps are pointed out and suitable exchange formats for freeform data are proposed. The described approach offers the possibility for efficient data handling from optical

  14. Comparing the effects of minimal handling protocols on the physiological parameters of preterm infants receiving exogenous surfactant therapy

    PubMed Central

    Cabral, Laura A.; Velloso, Marcelo

    2014-01-01

    Background The practice of minimal handling is recommended for preterm infants (PTIs). However, few studies have investigated the effects of this practice among these infants or the time needed to ensure greater physiological stability, especially after exogenous surfactant treatments. Objective The current study compared the effects of two protocols of minimal handling on the physiological variables of PTIs after surfactant therapy. Method An exploratory prospective observational study was performed with 40 PTIs weighing less than 1,500 g. The infants were divided into two groups and monitored for 72 hours. One group received the standard minimal handling procedure during the first 12 hours after surfactant therapy; the other group (i.e., the modified group) received minimal handling within 72 hours after surfactant therapy. Infant heart rate (HR), oxygen saturation, body temperature, and the adverse events associated with changes to these variables were monitored every 10 minutes. Results Significant between-group differences were not found with regard to the occurrence of the adverse events associated with physiological changes (p>0.05). Conclusion The practice of minimal handling among very low birth weight infants did not alter their physiological stability when performed either 12 or 72 hours after surfactant therapy. PMID:24839044

  15. Adverse childhood experiences and premature all-cause mortality.

    PubMed

    Kelly-Irving, Michelle; Lepage, Benoit; Dedieu, Dominique; Bartley, Mel; Blane, David; Grosclaude, Pascale; Lang, Thierry; Delpierre, Cyrille

    2013-09-01

    Events causing stress responses during sensitive periods of rapid neurological development in childhood may be early determinants of all-cause premature mortality. Using a British birth cohort study of individuals born in 1958, the relationship between adverse childhood experiences (ACE) and mortality≤50 year was examined for men (n=7,816) and women (n=7,405) separately. ACE were measured using prospectively collected reports from parents and the school: no adversities (70%); one adversity (22%), two or more adversities (8%). A Cox regression model was carried out controlling for early life variables and for characteristics at 23 years. In men the risk of death was 57% higher among those who had experienced 2+ ACE compared to those with none (HR 1.57, 95% CI 1.13, 2.18, p=0.007). In women, a graded relationship was observed between ACE and mortality, the risk increasing as ACE accumulated. Women with one ACE had a 66% increased risk of death (HR 1.66, 95% CI 1.19, 2.33, p=0.003) and those with ≥2 ACE had an 80% increased risk (HR 1.80, 95% CI 1.10, 2.95, p=0.020) versus those with no ACE. Given the small impact of adult life style factors on the association between ACE and premature mortality, biological embedding during sensitive periods in early development is a plausible explanatory mechanism.

  16. 46 CFR 111.106-13 - Cargo handling devices or cargo pump rooms handling flammable or combustible cargoes.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Cargo handling devices or cargo pump rooms handling... OSVs § 111.106-13 Cargo handling devices or cargo pump rooms handling flammable or combustible cargoes... classification of such areas. (c) Cargo pump rooms must be isolated from all sources of vapor ignition...

  17. Synergistic childhood adversities and complex adult psychopathology.

    PubMed

    Putnam, Karen T; Harris, William W; Putnam, Frank W

    2013-08-01

    Numerous studies find a cumulative effect of different types of childhood adversities on increasing risk for serious adult mental and medical outcomes. This study uses the National Comorbidity Survey-Replication sample to investigate the cumulative impact of 8 childhood adversities on complex adult psychopathology as indexed by (a) number of lifetime diagnoses according to the Diagnostic and Statistical Manual of Mental Disorders (4th ed., DSM-IV; American Psychiatric Association, 1994); (b) number of 4 DSM-IV disorder categories (mood, anxiety, impulse control, and substance abuse disorders); and (c) coexistence of internalizing and externalizing disorders. Seven of the 8 childhood adversities were significantly associated with complex adult psychopathology. Individuals with 4 or more childhood adversities had an odds ratio of 7.3, 95% confidence interval [4.7, 11.7] for 4 disorder categories. Additive and multiplicative synergistic effects increasing adult psychopathology were found for specific pairwise combinations of childhood adversities. Synergistic patterns differed by gender suggesting that women are more impacted by sexual abuse and men by economic hardship. The absence of childhood adversities was protective, in that it significantly decreased an individual's risk for subsequent adult mental illness. The results support the clinical impression that increased childhood adversity is associated with more complex adult psychopathology.

  18. Mechanisms of adverse drug reactions to biologics.

    PubMed

    Clarke, Janet B

    2010-01-01

    Biologics encompass a broad range of therapeutics that include proteins and other products derived from living systems. Although the multiplicity of target organs often seen with new chemical entities is generally not seen with biologics, they can produce significant adverse reactions. Examples include IL-12 and an anti-CD28 antibody that resulted in patient deaths and/or long stays in intensive care units. Mechanisms of toxicities can be categorized as pharmacological or nonpharmacological, with most, excepting hypersensitivity reactions, associated with the interaction of the agent with its planned target. Unexpected toxicities generally arise as a result of previously unknown biology. Manufacturing quality is a significant issue relative to the toxicity of biologics. The development of recombinant technology represented the single biggest advance leading to humanized products with minimal or no contaminants in comparison to products purified from animal tissues. Nevertheless, the type of manufacturing process including choice of cell type, culture medium, and purification method can result in changes to the protein. For example, a change to the closure system for erythropoietin led to an increase in aplastic anemia as a result of changing the immunogenicity characteristics of the protein. Monoclonal antibodies represent a major class of successful biologics. Toxicities associated with these agents include those associated with the binding of the complementary determining region (CDR) with the target. First dose reactions or infusion reactions are generally thought to be mediated via the Fc region of the antibody activating cytokine release, and have been observed with several antibodies. Usually, these effects (flu-like symptoms, etc.) are transient with subsequent dosing. Although biologics can have nonpharmacologic toxicities, these are less common than with small molecule drugs.

  19. [Handling of a Bellovac ABT drainage recuperation--blood auto transfusion device].

    PubMed

    Gómez, Raquel Gómez; Muñoz, Eva Ma Martínez; Montañés, Ma Carmen Surroca

    2009-09-01

    The authors describe the characteristics of the Bellovac ABT drainage recuperation -blood auto transfusion device along with its proper handling and the required nurses' care in order to minimize the risks and to provide optimum safety for patients. The authors also explain the potential complications and they discuss the main advantages and inconveniences this type of drainage has.

  20. Analysis of aircraft longitudinal handling qualities

    NASA Technical Reports Server (NTRS)

    Hess, R. A.

    1981-01-01

    The optimal control model (OCM) of the human pilot is applied to the study of aircraft handling qualities. Attention is focused primarily on longitudinal tasks. The modeling technique differs from previous applications of the OCM in that considerable effort is expended in simplifying the pilot/vehicle analysis. After briefly reviewing the OCM, a technique for modeling the pilot controlling higher order systems is introduced. Following this, a simple criterion for determining the susceptibility of an aircraft to pilot induced oscillations (PIO) is formulated. Finally, a model-based metric for pilot rating prediction is discussed. The resulting modeling procedure provides a relatively simple, yet unified approach to the study of a variety of handling qualities problems.

  1. Development of liquid handling techniques in microgravity

    NASA Technical Reports Server (NTRS)

    Antar, Basil N.

    1995-01-01

    A large number of experiments dealing with protein crystal growth and also with growth of crystals from solution require complicated fluid handling procedures including filling of empty containers with liquids, mixing of solutions, and stirring of liquids. Such procedures are accomplished in a straight forward manner when performed under terrestrial conditions in the laboratory. However, in the low gravity environment of space, such as on board the Space Shuttle or an Earth-orbiting space station, these procedures sometimes produced entirely undesirable results. Under terrestrial conditions, liquids usually completely separate from the gas due to the buoyancy effects of Earth's gravity. Consequently, any gas pockets that are entrained into the liquid during a fluid handling procedure will eventually migrate towards the top of the vessel where they can be removed. In a low gravity environment any folded gas bubble will remain within the liquid bulk indefinitely at a location that is not known a priori resulting in a mixture of liquid and vapor.

  2. The handling of causality in SEA guidance

    SciTech Connect

    Perdicoulis, A. . E-mail: tasso@utad.pt; Hanusch, M. . E-mail: marie.hanusch@ufz.de; Kasperidus, H.D. . E-mail: hans.kasperidus@ufz.de; Weiland, U. . E-mail: ulrike.weiland@ufz.de

    2007-03-15

    Causality, or the relation of cause and effect, is a fundamental notion in science, planning, and management. It is also a fundamental notion in impact assessment, as it relates action proposals with environmental impacts. Building on recent research about causality in impact assessment, this article turns to Strategic Environmental Assessment (SEA) and examines eleven guidance documents to see whether and how they handle causality. The findings of this research, in line with results from similar research in EIA, indicate a weak handling of causality with regards to instruction, obligation, and theoretical support. The recommendations are to investigate the reasons for the observed trend, as there is no evidence in the guidance documents themselves, and to have the fundamental premise of causality in impact assessment safeguarded in future SEA guidance.

  3. A guide to forest seed handling

    SciTech Connect

    Willan, R.L.

    1986-01-01

    This guide to forest seed handling focuses on seed quality, i.e., the physiological viability and vigor of the seeds. Seed and fruit development, germination, and dormancy and the fundamentals of planning seed collections are covered. The guide includes discussions on seed collection of fallen fruits or seeds from the forest floor from the crowns of felled trees, and from standing trees with access from the ground and with other means of access. Also considered are precautions to be followed during fruit and seed handling between collection and processing. The different stages in seed processing are detailed, including extraction, depulping, drying, tumbling and threshing, dewinging, cleaning, grading, and mixing. Factors affecting seed longevity in storage and the choice of storage methods are reviewed. Different forms of seed pretreatment and seed testing methods are described.

  4. Alkali Metal Handling Practices at NASA MSFC

    NASA Technical Reports Server (NTRS)

    Salvail, Patrick G.; Carter, Robert R.

    2002-01-01

    NASA Marshall Space Flight Center (MSFC) is NASA s principle propulsion development center. Research and development is coordinated and carried out on not only the existing transportation systems, but also those that may be flown in the near future. Heat pipe cooled fast fission cores are among several concepts being considered for the Nuclear Systems Initiative. Marshall Space Flight Center has developed a capability to handle high-purity alkali metals for use in heat pipes or liquid metal heat transfer loops. This capability is a low budget prototype of an alkali metal handling system that would allow the production of flight qualified heat pipe modules or alkali metal loops. The processing approach used to introduce pure alkali metal into heat pipe modules and other test articles are described in this paper.

  5. Fuel handling apparatus for a nuclear reactor

    DOEpatents

    Hawke, Basil C.

    1987-01-01

    Fuel handling apparatus for transporting fuel elements into and out of a nuclear reactor and transporting them within the reactor vessel extends through a penetration in the side of the reactor vessel. A lateral transport device carries the fuel elements laterally within the vessel and through the opening in the side of the vessel, and a reversible lifting device raises and lowers the fuel elements. In the preferred embodiment, the lifting device is supported by a pair of pivot arms.

  6. Mars Sample Handling Protocol Workshop Series

    NASA Technical Reports Server (NTRS)

    Rummel, John D. (Editor); Race, Margaret S. (Editor); Acevedo, Sara (Technical Monitor)

    2000-01-01

    This document is the report resulting from the first workshop of the series on development of the criteria for a Mars sample handling protocol. Workshop 1 was held in Bethesda, Maryland on March 20-22, 2000. This report serves to document the proceedings of Workshop 1; it summarizes relevant background information, provides an overview of the deliberations to date, and helps frame issues that will need further attention or resolution in upcoming workshops. Specific recommendations are not part of this report.

  7. D0 data handling operational experience

    SciTech Connect

    Lee Lueking et al.

    2003-08-11

    We report on the production experience of the D0 experiment at the Fermilab Tevatron, using the SAM data handling system with a variety of computing hardware configurations, batch systems, and mass storage strategies. We have stored more than 300 TB of data in the Fermilab Enstore mass storage system. We deliver data through this system at an average rate of more than 2 TB/day to analysis programs, with a substantial multiplication factor in the consumed data through intelligent cache management. We handle more than 1.7 Million files in this system and provide data delivery to user jobs at Fermilab on four types of systems: a reconstruction farm, a large SMP system, a Linux batch cluster, and a Linux desktop cluster. In addition, we import simulation data generated at 6 sites worldwide, and deliver data to jobs at many more sites. We describe the scope of the data handling deployment worldwide, the operational experience with this system, and the feedback of that experience.

  8. Vestibule and Cask Preparation Mechanical Handling Calculation

    SciTech Connect

    N. Ambre

    2004-05-26

    The scope of this document is to develop the size, operational envelopes, and major requirements of the equipment to be used in the vestibule, cask preparation area, and the crane maintenance area of the Fuel Handling Facility. This calculation is intended to support the License Application (LA) submittal of December 2004, in accordance with the directive given by DOE correspondence received on the 27th of January 2004 entitled: ''Authorization for Bechtel SAIC Company L.L.C. to Include a Bare Fuel Handling Facility and Increased Aging Capacity in the License Application, Contract Number DE-AC28-01R W12101'' (Ref. 167124). This correspondence was appended by further correspondence received on the 19th of February 2004 entitled: ''Technical Direction to Bechtel SAIC Company L.L. C. for Surface Facility Improvements, Contract Number DE-AC28-01R W12101; TDL No. 04-024'' (Ref. 16875 1). These documents give the authorization for a Fuel Handling Facility to be included in the baseline. The limitations of this preliminary calculation lie within the assumptions of section 5 , as this calculation is part of an evolutionary design process.

  9. Improving Memory Error Handling Using Linux

    SciTech Connect

    Carlton, Michael Andrew; Blanchard, Sean P.; Debardeleben, Nathan A.

    2014-07-25

    As supercomputers continue to get faster and more powerful in the future, they will also have more nodes. If nothing is done, then the amount of memory in supercomputer clusters will soon grow large enough that memory failures will be unmanageable to deal with by manually replacing memory DIMMs. "Improving Memory Error Handling Using Linux" is a process oriented method to solve this problem by using the Linux kernel to disable (offline) faulty memory pages containing bad addresses, preventing them from being used again by a process. The process of offlining memory pages simplifies error handling and results in reducing both hardware and manpower costs required to run Los Alamos National Laboratory (LANL) clusters. This process will be necessary for the future of supercomputing to allow the development of exascale computers. It will not be feasible without memory error handling to manually replace the number of DIMMs that will fail daily on a machine consisting of 32-128 petabytes of memory. Testing reveals the process of offlining memory pages works and is relatively simple to use. As more and more testing is conducted, the entire process will be automated within the high-performance computing (HPC) monitoring software, Zenoss, at LANL.

  10. Handling Qualities Influences on Civil Tiltrotor Terminal Operating Procedure Development

    NASA Technical Reports Server (NTRS)

    Decker, William A.; Simmons, Rickey C.; Tucker, George E.; Aiken, Edwin W. (Technical Monitor)

    1994-01-01

    The potential for tiltrotor aircraft as civil transports has been well recognized. Realization of that potential requires development of operating procedures tailored to take advantage of the tiltrotor's capabilities, including thrust vectoring independent of body pitch attitude and good low-speed control. While the tiltrotor shares flight characteristics with both fixed wing airplanes and helicopters, it must convert between those flight modes, typically within the context of precise terminal operations. A series of piloted simulation experiments has been conducted on the NASA Ames Research Center Vertical Motion Simulator (VMS) to investigate the influence of tiltrotor cockpit design features on developing certification and operating criteria for civil tiltrotor transports. Handling qualities evaluations have shaped cockpit design guidelines and operating procedure development for a civil tiltrotor. In particular, four topics demonstrate the interplay of handling qualities and operations profile in the development of terminal operating procedures and cockpit or control equipment for a civil tiltrotor: conversion (airplane to helicopter mode), final approach path angle, operating profile speeds and speed changes (particularly under instrument conditions), and one engine inoperative operational considerations.

  11. Prenatal alcohol and other early childhood adverse exposures: Direct and indirect pathways to adolescent drinking

    PubMed Central

    Cornelius, Marie D.; De Genna, Natacha M.; Goldschmidt, Lidush; Larkby, Cynthia; Day, Nancy L.

    2016-01-01

    We examined direct and indirect pathways between adverse environmental exposures during gestation and childhood and drinking in mid-adolescence. Mothers and their offspring (n = 917 mother/child dyads) were followed prospectively from second trimester to a 16-year follow-up assessment. Interim assessments occurred at delivery, 6, 10, and 14 years. Adverse environmental factors included gestational exposures to alcohol, tobacco, and marijuana, exposures to childhood maltreatment and violence, maternal psychological symptoms, parenting practices, economic and home environments, and demographic characteristics of the mother and child. Indirect effects of early child behavioral characteristics including externalizing, internalizing activity, attention, and impulsivity were also examined. Polytomous logistic regression analyses were used to evaluate direct effects of adverse environmental exposures with level of adolescent drinking. Structural equation modeling (SEM) was applied to simultaneously estimate the relation between early adversity variables, childhood characteristics, and drinking level at age 16 while controlling for significant covariates. Level of drinking among the adolescent offspring was directly predicted by prenatal exposure to alcohol, less parental strictness, and exposures to maltreatment and violence during childhood. Whites and offspring with older mothers were more likely to drink at higher levels. There was a significant indirect effect between childhood exposure to violence and adolescent drinking via childhood externalizing behavior problems. All other hypothesized indirect pathways were not significant. Thus most of the early adversity measures directly predicted adolescent drinking and did not operate via childhood behavioral dysregulation characteristics. These results highlight the importance of adverse environmental exposures on pathways to adolescent drinking. PMID:26994529

  12. CANISTER HANDLING FACILITY CRITICALITY SAFETY CALCULATIONS

    SciTech Connect

    C.E. Sanders

    2005-04-07

    This design calculation revises and updates the previous criticality evaluation for the canister handling, transfer and staging operations to be performed in the Canister Handling Facility (CHF) documented in BSC [Bechtel SAIC Company] 2004 [DIRS 167614]. The purpose of the calculation is to demonstrate that the handling operations of canisters performed in the CHF meet the nuclear criticality safety design criteria specified in the ''Project Design Criteria (PDC) Document'' (BSC 2004 [DIRS 171599], Section 4.9.2.2), the nuclear facility safety requirement in ''Project Requirements Document'' (Canori and Leitner 2003 [DIRS 166275], p. 4-206), the functional/operational nuclear safety requirement in the ''Project Functional and Operational Requirements'' document (Curry 2004 [DIRS 170557], p. 75), and the functional nuclear criticality safety requirements described in the ''Canister Handling Facility Description Document'' (BSC 2004 [DIRS 168992], Sections 3.1.1.3.4.13 and 3.2.3). Specific scope of work contained in this activity consists of updating the Category 1 and 2 event sequence evaluations as identified in the ''Categorization of Event Sequences for License Application'' (BSC 2004 [DIRS 167268], Section 7). The CHF is limited in throughput capacity to handling sealed U.S. Department of Energy (DOE) spent nuclear fuel (SNF) and high-level radioactive waste (HLW) canisters, defense high-level radioactive waste (DHLW), naval canisters, multicanister overpacks (MCOs), vertical dual-purpose canisters (DPCs), and multipurpose canisters (MPCs) (if and when they become available) (BSC 2004 [DIRS 168992], p. 1-1). It should be noted that the design and safety analyses of the naval canisters are the responsibility of the U.S. Department of the Navy (Naval Nuclear Propulsion Program) and will not be included in this document. In addition, this calculation is valid for the current design of the CHF and may not reflect the ongoing design evolution of the facility

  13. [Cardiovascular pharmacotherapy. Risks and adverse effects].

    PubMed

    Voigt, N; Heijman, J; Dobrev, D

    2014-03-01

    Adverse side effects of drugs are a significantly underestimated problem in modern medicine. In this review article, we summarize common adverse side effects of cardiovascular drugs. In particular, we highlight the factors promoting these adverse side effects in patients, including reduced hepatic or renal clearance in elderly patients that often requires dosage adjustment. Pharmacodynamic and pharmacokinetic interactions between drugs (e.g. through the cytochrome P450 system or P-glycoproteins) can modify the plasma concentration of many compounds, thereby also increasing the likelihood of unwanted side effects. The most prominent cardiac side effects include arrhythmias, e.g. atrioventricular (AV) block, drug-induced long-QT syndrome and torsade de pointes and altered inotropy. Non-cardiac side effects are subsequently discussed grouped by drug class. A better understanding of the risks and side effects of cardiovascular drugs is expected to reduce the mortality and morbidity associated with adverse side effects.

  14. Childhood adversities and psychosis: evidence, challenges, implications

    PubMed Central

    Morgan, Craig; Gayer‐Anderson, Charlotte

    2016-01-01

    There is a substantial body of research reporting evidence of associations between various forms of childhood adversity and psychosis, across the spectrum from experiences to disorder. This has been extended, more recently, to include studies of cumulative effects, of interactions with other factors, of specific effects, and of putative biological and psychological mechanisms. In this paper we evaluate this research and highlight the remaining methodological issues and gaps that temper, but do not dismiss, conclusions about the causal role of childhood adversity. We also consider the emerging work on cumulative, synergistic, and specific effects and on mechanisms; and discuss the broader implications of this line of research for our understanding of psychosis. We conclude that the current balance of evidence is that childhood adversities – particularly exposure to multiple adversities involving hostility and threat – do, in some people, contribute to the onset of psychotic experiences and psychotic disorders. PMID:27265690

  15. RACIAL RESIDENTIAL SEGREGATION AND ADVERSE BIRTH OUTCOMES

    EPA Science Inventory

    INTRODUCTION. The disparity between black and white women's adverse birth outcomes has been subject to much investigation, yet the factors underlying its persistence remain elusive, which has encouraged research on neighborhood-level influences, including racial residential segr...

  16. Adverse Outcome Pathways: From Definition to Application

    EPA Science Inventory

    A challenge for both human health and ecological toxicologists is the transparent application of mechanistic (e.g., molecular, biochemical, histological) data to risk assessments. The adverse outcome pathway (AOP) is a conceptual framework designed to meet this need. Specifical...

  17. Design of Adverse Drug Events-Scorecards.

    PubMed

    Marcilly, Romaric; Chazard, Emmanuel; Beuscart-Zéphir, Marie-Catherine; Hackl, Werner; Băceanu, Adrian; Kushniruk, Andre; Borycki, Elizabeth M

    2011-01-01

    This paper presents the design of Adverse Drug Event-Scorecards. The scorecards described are innovative and novel, not having previously been reported in the literature. The Scorecards provide organizations (e.g. hospitals) with summary information about Adverse Drug Events (ADEs) using a Web-based platform. The data used in the Scorecards are routinely updated and report on ADEs detected through data mining processes. The development of the ADE Scorecards is ongoing and they are currently undergoing clinical testing.

  18. [Allergies and adverse events associated with fluoroquinolones].

    PubMed

    Muller, Y; Andrey, D; Emonet, S; Harr, T; Spoerl, D

    2015-04-08

    The prescription ot fluoroquinolones has been constantly increasing over the past decade. consequently, an increasing number of hyper-sensitivity reactions and adverse events have been reported. The aim of the review is to discuss the incidence of hypersensitivity reactions either IgE (immediate) or T cells mediated (delayed). We will make an overview ofthe diagnostic tools available to detect such hypersensitivity reactions. Finally, the specific adverse events associated with fluoroquinolones, including tendinopathy, chondrotoxicity, peripheral neuropathy or retinal detachment will be discussed.

  19. Childhood adversity and frequent medical consultations.

    PubMed

    Fiddler, Maggie; Jackson, Judy; Kapur, Navneet; Wells, Adrian; Creed, Francis

    2004-01-01

    We assessed possible psychological mediators of the relationship between childhood adversity and frequent medical consultations among new outpatients at neurology, cardiology, and gastroenterology clinics. We assessed whether these differed in patients with and without organic disease that explained their symptoms. At first clinic visit we recorded Hospital Anxiety and Depression scale (HADS--anxiety and depression subscale scores), Illness Perception Questionnaire (IPQ--four subscales: consequences, cure, identity, timeline), Health Anxiety Questionnaire (total score), and Symptom Amplification Scale (total score). Subjects were divided into two groups according to whether they had experienced any type of childhood adversity using the Childhood Experience of Care and Abuse Schedule. Outcome was the (log) number of medical consultations for 12 months before and 6 months after the index clinic visits. Multiple regression analysis was used to determine mediators; this was performed separately for patients with symptoms explained and not explained by organic disease. One-hundred and twenty-nine patients (61% response) were interviewed. Fifty-two (40.3%) had experienced childhood adversity; they made a median of 16 doctor visits compared with 10 for those without adversity (adjusted P=.026). IPQ identity score (number of symptoms attributed to the illness) and HAD depression scores were significantly associated with both childhood adversity and number of medical consultations and these variables acted as mediators between childhood adversity and frequency of consultation in the multiple regression analyses. This association was limited to patients with medically unexplained symptoms and was mediated by IPQ Identity Score (number of symptoms attributed to the patient's illness) and HAD depression score. Sexual abuse and overt neglect were the adversities most closely associated with frequent consultations. In patients with medically unexplained symptoms the association

  20. Adverse drug reactions in hospitalized Colombian children

    PubMed Central

    Díaz-Agudelo, Daniela; Burgos-Flórez, Francisco Javier; Vaca, Claudia; Serrano-Meriño, Dolores Vanessa

    2016-01-01

    Introduction: The occurrence of adverse drug reactions is an important issue due to the lack of drug safety data in children. Objective: To describe the Adverse Drug Reactions in inpatient children under 6 years of age in two general pediatrics wards located in Barranquilla, Colombia. Methods: A prospective cohort study based on intensive pharmacovigilance was conducted during six months in order to monitor the emergence of Adverse Drug Reactions in inpatients children under 6 years of age with at least one medication prescribed. The study was conducted in two pediatric wards of two hospitals located in Barranquilla, Colombia. Naranjo´s Algorithm was used to evaluate imputability, the modified Hartwig and Siegel assessment scale to establish severity and the Schumock and Thornton criteria to determine preventability. Results: Of a total of 772 monitored patients, 156 Adverse Drug Reactions were detected on 147 children. The cumulative incidence of Adverse Drug Reactions was 19.0% (147/772); the incidence density was 37.6 Adverse Drug Reactions per 1,000 patients-days (147/3,913). The frequency was higher in children under 2 years of age (12.7%). Emergence of Adverse Drug Reactions was higher in male patients (RR= 1.66; 95% CI= 1.22-2.22, p= 0.001) and in those who used systemic antibiotics (RR= 1.82; 95% CI= 1.17-2.82, p= 0.005). Conclusions: Adverse Drug Reactions are common among hospitalized children and represent an additional burden of morbidity and risk, particularly in those who used several medicines, including antibiotics. PMID:27821893

  1. Recognizing and reporting adverse drug reactions.

    PubMed Central

    Lucas, L. M.; Colley, C. A.

    1992-01-01

    Although physicians in practice are most likely to see patients with adverse drug reactions, they may fail to recognize an adverse effect or to attribute it to a drug effect and, when recognized, they may fail to report serious reactions to the US Food and Drug Administration (FDA). To recognize and attribute an adverse event to a drug effect, physicians should review the patient's clinical course, looking at patient risk factors, the known adverse reactions to the suspected drug, and the likelihood of a causal relationship between the drug and the adverse event-based on the temporal relationship, response to stopping or restarting the drug, and whether other factors could explain the reaction. Once an adverse drug reaction has been identified, the patient should be informed and appropriate documentation made in the patient's medical record. Serious known reactions and all reactions to newly released drugs or those not previously known to occur (even if the certainty is low) should be reported to the FDA. PMID:1536067

  2. Easylife: The Data Reduction and Survey Handling System for VIPERS

    NASA Astrophysics Data System (ADS)

    Garilli, B.; Paioro, L.; Scodeggio, M.; Franzetti, P.; Fumana, M.; Guzzo, L.

    2012-11-01

    We present Easylife, the software environment developed within the framework of the VIPERS project for automatic data reduction and survey handling. Easylife is a comprehensive system to automatically reduce spectroscopic data, to monitor the survey advancement at all stages, to distribute data within the collaboration, and to release data to the whole community. It is based on the OPTICON-founded project FASE, and inherits the FASE capabilities of modularity and scalability. After describing the software architecture, the main reduction and quality control features, and the main services made available, we show its performance in terms of reliability of results. We also show how it can be ported to other projects with different characteristics.

  3. Pharmacovigilance, risks and adverse effects of self-medication.

    PubMed

    Montastruc, Jean-Louis; Bondon-Guitton, Emmanuelle; Abadie, Delphine; Lacroix, Isabelle; Berreni, Aurélia; Pugnet, Grégory; Durrieu, Geneviève; Sailler, Laurent; Giroud, Jean-Paul; Damase-Michel, Christine; Montastruc, François

    2016-04-01

    Self-medication means resorting to one or more drugs in order to treat oneself without the help of a doctor. This phenomenon is developing fast. In this review, we will discuss the main definitions of self-medication; we will then present a few important characteristics of this therapeutic practice: prevalence, reasons, populations involved and drugs used. Whilst the theoretical risks of self-medication have been abundantly discussed in the literature (adverse effects, interactions, product, dosage or treatment duration errors, difficulty in self-diagnosis, risk of addiction or abuse…), there is in fact very little detailed pharmacovigilance data concerning the characteristics and the consequences of this usage in real life. This study therefore describes the all too rare data that is available: patients, clinical characteristics, "seriousness" and drugs involved in the adverse effects of self-medication. It also discusses leads to be followed in order to minimize medication risks, which are obviously not well known and clearly not sufficiently notified.

  4. 7 CFR 958.53 - Handling for specified purposes.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... DESIGNATED COUNTIES IN IDAHO, AND MALHEUR COUNTY, OREGON Order Regulating Handling Regulation § 958.53..., in order to facilitate the handling of onions for the following purposes whenever he finds that to...

  5. Training Materials for Handling Claims of Sexual Harassment.

    ERIC Educational Resources Information Center

    Roe, Betty

    1982-01-01

    Reviews resource materials for handling claims of sexual harassment. Includes guidelines for administrators in handling complaints of sexual harassment and discusses the responsibilities of management. Explores the definition of sexual harassment. (RC)

  6. Insulin and renal sodium handling: clinical implications.

    PubMed

    DeFronzo, R A

    1981-01-01

    Over the last ten years a large body of information has accumulated which indicates that physiologic changes in the plasma insulin concentration are capable of affecting electrolyte transport by the kidney as well as by variety of other tissues. In the present discussion the effect of insulin on the renal handling of sodium, potassium, phosphate, and calcium is reviewed, with an emphasis on sodium transport (Table 1). An attempt is made to relate the effects of insulin on sodium metabolism to four common clinical situations: (a) hypertension and obesity, (b) sodium wasting in diabetes mellitus, (c) natriuresis of starvation, and (d) sodium retention and edema following refeeding.

  7. System for handling and storing radioactive waste

    DOEpatents

    Anderson, John K.; Lindemann, Paul E.

    1984-01-01

    A system and method for handling and storing spent reactor fuel and other solid radioactive waste, including canisters to contain the elements of solid waste, storage racks to hold a plurality of such canisters, storage bays to store these racks in isolation by means of shielded doors in the bays. This system also includes means for remotely positioning the racks in the bays and an access tunnel within which the remotely operated means is located to position a rack in a selected bay. The modular type of these bays will facilitate the construction of additional bays and access tunnel extension.

  8. CANISTER HANDLING FACILITY WORKER DOSE ASSESSMENT

    SciTech Connect

    D.T. Dexheimer

    2004-02-27

    The purpose of this calculation is to estimate radiation doses received by personnel working in the Canister Handling Facility (CHF) performing operations to receive transportation casks, transfer wastes, prepare waste packages, perform associated equipment maintenance. The specific scope of work contained in this calculation covers individual worker group doses on an annual basis, and includes the contributions due to external and internal radiation. The results of this calculation will be used to support the design of the CHF and provide occupational dose estimates for the License Application.

  9. System for handling and storing radioactive waste

    DOEpatents

    Anderson, J.K.; Lindemann, P.E.

    1982-07-19

    A system and method are claimed for handling and storing spent reactor fuel and other solid radioactive waste, including canisters to contain the elements of solid waste, storage racks to hold a plurality of such canisters, storage bays to store these racks in isolation by means of shielded doors in the bays. This system also includes means for remotely positioning the racks in the bays and an access tunnel within which the remotely operated means is located to position a rack in a selected bay. The modular type of these bays will facilitate the construction of additional bays and access tunnel extension.

  10. A robotic manipulator for handling TLD badges.

    PubMed

    Levinson, S; Weinstein, M; Abraham, A; German, U; Gorelik, V; Rozenfeld, R; Hillel, S; Rodnay, G

    2008-11-01

    A prototype system for automatic handling of Harshaw/Bicron (now ThermoFisher Scientific) thermoluminescent dosimetry (TLD) badges, which is based on a robotic arm, was designed and built. The robot performs the loading and unloading of the TLD cards in the badges and transports them between the loading/unloading station and magazine stations. For quality assurance, a sticker containing the worker's details printed in barcode format was added to the badge. Automatic on-line identification is performed for checking the correlation between the badge and the TLD card number.

  11. DISPOSAL CONTAINER HANDLING SYSTEM DESCRIPTION DOCUMENT

    SciTech Connect

    E. F. Loros

    2000-06-30

    The Disposal Container Handling System receives and prepares new disposal containers (DCs) and transfers them to the Assembly Transfer System (ATS) or Canister Transfer System (CTS) for loading. The system receives the loaded DCs from ATS or CTS and welds the lids. When the welds are accepted the DCs are termed waste packages (WPs). The system may stage the WP for later transfer or transfer the WP directly to the Waste Emplacement/Retrieval System. The system can also transfer DCs/WPs to/from the Waste Package Remediation System. The Disposal Container Handling System begins with new DC preparation, which includes installing collars, tilting the DC upright, and outfitting the container for the specific fuel it is to receive. DCs and their lids are staged in the receipt area for transfer to the needed location. When called for, a DC is put on a cart and sent through an airlock into a hot cell. From this point on, all processes are done remotely. The DC transfer operation moves the DC to the ATS or CTS for loading and then receives the DC for welding. The DC welding operation receives loaded DCs directly from the waste handling lines or from interim lag storage for welding of the lids. The welding operation includes mounting the DC on a turntable, removing lid seals, and installing and welding the inner and outer lids. After the weld process and non-destructive examination are successfully completed, the WP is either staged or transferred to a tilting station. At the tilting station, the WP is tilted horizontally onto a cart and the collars removed. The cart is taken through an air lock where the WP is lifted, surveyed, decontaminated if required, and then moved into the Waste Emplacement/Retrieval System. DCs that do not meet the welding non-destructive examination criteria are transferred to the Waste Package Remediation System for weld preparation or removal of the lids. The Disposal Container Handling System is contained within the Waste Handling Building System

  12. The Remote-Handled TRU Waste Program

    SciTech Connect

    Gist, C. S.; Plum, H. L.; Wu, C. F.; Most, W. A.; Burrington, T. P.; Spangler, L. R.

    2002-02-26

    RH TRU Waste is radioactive waste that requires shielding in addition to that provided by the container to protect people nearby from radiation exposure. By definition, the radiation dose rate at the outer surface of the container is greater than 200 millirem per hour and less than 1,000 rem per hour. The DOE is proposing a process for the characterization of RH TRU waste planned for disposal in the WIPP. This characterization process represents a performance-driven approach that satisfies the requirements of the New Mexico Hazardous Waste Act, the Environmental Protection Agency (EPA) regulations for WIPP long-term performance, the transportation requirements of the Nuclear Regulatory Commission (NRC) and the Department of Transportation, as well as the technical safety requirements of RH TRU waste handling. The transportation, management and disposal of RH TRU waste is regulated by external government agencies as well as by the DOE itself. Externally, the characterization of RH-TRU waste for disposal at the WIPP is regulated by 20.4.1.500 New Mexico Administrative Code (incorporating 40 CFR 261.13) for the hazardous constituents and 40 CFR 194.24 for the radioactive constituents. The Nuclear Regulatory Commission certifies the shipping casks and the transportation system must meet DOT regulations. Internally, the DOE evaluates the environmental impacts of RH TRU waste transportation, handling and disposal through its National Environmental Policy Act program. The operational safety is assessed in the RH TRU Waste Safety Analysis Report, to be approved by the DOE. The WIPP has prepared a modification request to the Hazardous Waste Facility Permit that includes modifications to the WIPP facility for the safe receipt and handling of RH TRU waste and the addition of an RH TRU waste analysis plan. Modifications to the facility include systems and equipment for safe handling of RHTRU containers. Two shipping casks are to be used to optimize RH TRU was te throughput

  13. Lessons learned in handling western coals

    SciTech Connect

    Wilks, D.M.

    1982-12-01

    This paper describes specific design features and improvements incorporated into the coal handling facility for Roy Tolk Station, a power plant utilizing western coal. Traditionally, western electric generation has been through the use of natural gas as a boiler fuel. Some utilities have selected western coal as an alternative due to high costs and the need to conserve natural gas. Special design considerations are necessary to cope with the friability and propensity for spontaneous combustion found in western coal. As a result of hands-on experience such as the Tolk Station, practices can be developed to reduce dusting, minimize routine clean-up, optimize system design and conserve washdown water.

  14. Radiation and ecological aspects of tritium handling

    SciTech Connect

    Belovodskiy, L.F.

    1994-12-31

    Results of VNIIEF investigations into regularities of radioactive waste production in tritium handling (gaseous, liquid, solid wastes) as well as tritium and its oxide (HTO, DTO, TTO) migration in environmental objects (air, water, soil, vegetation) are presented. The doses of population exposure due to tritium release into the atmosphere have been determined. The dose factor being 2.2 E13 mrem{sup *}L/Ci/year. The constants of tritium oxide sorption by foods and the density of tritium fallout near the term source have been used to develop the conceptual international design of thermonuclear reactor (ITER).

  15. APPARATUS FOR HANDLING MIXTURES OF SOLID MATERIALS

    DOEpatents

    Hubbell, J.P.

    1959-08-25

    An apparatus is described for handling either a mixture of finely subdivided materials or a single material requiring a compacting action thereon preparatory to a chemical reducing process carried out in a crucible container. The apparatus is designed to deposit a mixture of dust-forming solid materials in a container while confining the materials against escape into the surrounding atmosphere. A movable filling tube, having a compacting member, is connected to the container and to a covered hopper receiving the mixture of materials. The filling tube is capable of reciprocating in the container and their relative positions are dependent upon the pressure established upon the material by the compacting member.

  16. Level measurement solutions for coal handling applications

    SciTech Connect

    Koeneman, D.; Sholette, W.

    2006-06-15

    The article looks at the range and applications of level measurement technology for coal handling and related fly ash operations. Point level or on/off measurement instrumentation indicates the presence or absence of material in a surge bin storage silo or on a conveyor belt. Point level switches at high or low level turn on or turn off pumps and conveyors. Continuous level or proportional measurement indicates the level in a vessel over the full span of measurement. The article describes types of technologies in typical locations in a coal-fired power plant where point and continuous level measurements are taken. 1 fig.

  17. Adverse Family Experiences during Childhood and Adolescent Obesity

    PubMed Central

    Heerman, William J.; Krishnaswami, Shanthi; Barkin, Shari L.; McPheeters, Melissa

    2015-01-01

    Objective To evaluate the association between adverse family experiences (AFEs) during childhood and adolescent obesity and to determine populations at highest risk for adverse family experiences. Methods Cross sectional analysis of the 2011-2012 National Survey of Children’s Health, including children ages 10-17. Weighted estimates of 31,258,575 children were based on interviews with 42,239 caregivers. Caregiver-report of 9 psychosocial risk factors measured AFEs during childhood. Adolescent overweight and obesity were derived by caregiver-report of child height and weight. Results Nearly one-third (30.5%) of children had experienced ≥2 AFEs, with geographic variation by state. The prevalence of obesity among children experiencing ≥2 AFEs was 20.4%, compared with 12.5% among children with 0 AFEs. Adjusted survey regression models controlled for child, parent, household, and neighborhood characteristics. Children with ≥ 2 AFEs in childhood were more likely to be obese (AOR 1.8; 95% CI 1.47, 2.17; p<0.001) than those with no AFEs, with Non-Hispanic, White children most affected. Conclusions Adolescents in this national sample who were exposed to greater numbers of adverse family experiences in childhood also had higher rates of overweight and obesity. Geographic variation and differential associations based on race/ethnicity identify children at greatest risk. PMID:26853526

  18. Materials Handling. Module SH-01. Safety and Health.

    ERIC Educational Resources Information Center

    Center for Occupational Research and Development, Inc., Waco, TX.

    This student module on materials handling is one of 50 modules concerned with job safety and health. It presents the procedures for safe materials handling. Discussed are manual handling methods (lifting and carrying by hand) and mechanical lifting (lifting by powered trucks, cranes or conveyors). Following the introduction, 15 objectives (each…

  19. 7 CFR 322.21 - Post-entry handling.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ...) Will the facility's entryways, windows, and other structures, including water, air, and waste handling... 7 Agriculture 5 2011-01-01 2011-01-01 false Post-entry handling. 322.21 Section 322.21 Agriculture... Organisms § 322.21 Post-entry handling. (a) Immediately following clearance at the port of entry,...

  20. 7 CFR 959.126 - Handling of culls.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Handling of culls. 959.126 Section 959.126 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Regulations Safeguards § 959.126 Handling of culls. (a) The handling of culls, i.e., onions which fail to...

  1. 48 CFR 1852.211-70 - Packaging, handling, and transportation.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Packaging, handling, and... and Clauses 1852.211-70 Packaging, handling, and transportation. As prescribed in 1811.404-70, insert the following clause: Packaging, Handling, and Transportation (SEPT 2005) (a) The Contractor...

  2. 30 CFR 77.1303 - Explosives, handling and use.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Explosives, handling and use. 77.1303 Section... MINES Explosives and Blasting § 77.1303 Explosives, handling and use. (a) Persons who use or handle explosives or detonators shall be experienced men who understand the hazards involved; trainees shall do...

  3. 30 CFR 77.1303 - Explosives, handling and use.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Explosives, handling and use. 77.1303 Section... MINES Explosives and Blasting § 77.1303 Explosives, handling and use. (a) Persons who use or handle explosives or detonators shall be experienced men who understand the hazards involved; trainees shall do...

  4. 30 CFR 77.1303 - Explosives, handling and use.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Explosives, handling and use. 77.1303 Section... MINES Explosives and Blasting § 77.1303 Explosives, handling and use. (a) Persons who use or handle explosives or detonators shall be experienced men who understand the hazards involved; trainees shall do...

  5. 30 CFR 77.1303 - Explosives, handling and use.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Explosives, handling and use. 77.1303 Section... MINES Explosives and Blasting § 77.1303 Explosives, handling and use. (a) Persons who use or handle explosives or detonators shall be experienced men who understand the hazards involved; trainees shall do...

  6. 30 CFR 77.1303 - Explosives, handling and use.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Explosives, handling and use. 77.1303 Section... MINES Explosives and Blasting § 77.1303 Explosives, handling and use. (a) Persons who use or handle explosives or detonators shall be experienced men who understand the hazards involved; trainees shall do...

  7. 48 CFR 908.7112 - Materials handling equipment replacement standards.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Materials handling equipment replacement standards. 908.7112 Section 908.7112 Federal Acquisition Regulations System DEPARTMENT... Special Items 908.7112 Materials handling equipment replacement standards. Materials handling...

  8. 76 FR 37118 - Manual Materials Handling (MMH) Workshop

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-24

    ... HUMAN SERVICES Centers for Disease Control and Prevention Manual Materials Handling (MMH) Workshop... Health, will be holding a two-day Manual Materials Handling (MMH) Workshop. The Workshop is a National... engineering solutions for manual materials handling jobs in Retail, Wholesale and Warehouse industries....

  9. 76 FR 38306 - Fees for Special Handling of Registration Claims

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-30

    ... Copyright Office 37 CFR Part 201 Fees for Special Handling of Registration Claims AGENCY: Copyright Office... one year the interim rule relating to fees for special handling of registration claims that have been... relating to fees for special handling of registration claims that have been pending for at least six...

  10. 7 CFR 984.72 - Reports of merchantable walnuts handled.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Reports of merchantable walnuts handled. 984.72... SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE WALNUTS... merchantable walnuts handled. Each handler who handles merchantable walnuts, inshell or shelled, at any...

  11. 7 CFR 984.72 - Reports of merchantable walnuts handled.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Reports of merchantable walnuts handled. 984.72... SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE WALNUTS... merchantable walnuts handled. Each handler who handles merchantable walnuts, inshell or shelled, at any...

  12. 7 CFR 984.72 - Reports of merchantable walnuts handled.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false Reports of merchantable walnuts handled. 984.72... SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE WALNUTS... merchantable walnuts handled. Each handler who handles merchantable walnuts, inshell or shelled, at any...

  13. 7 CFR 984.72 - Reports of merchantable walnuts handled.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Reports of merchantable walnuts handled. 984.72... SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE WALNUTS... merchantable walnuts handled. Each handler who handles merchantable walnuts, inshell or shelled, at any...

  14. 7 CFR 984.72 - Reports of merchantable walnuts handled.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Reports of merchantable walnuts handled. 984.72... SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE WALNUTS... merchantable walnuts handled. Each handler who handles merchantable walnuts, inshell or shelled, at any...

  15. 7 CFR 923.322 - Washington cherry handling regulation.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Washington cherry handling regulation. 923.322 Section... CHERRIES GROWN IN DESIGNATED COUNTIES IN WASHINGTON Order Regulating Handling Grade, Size, Container and Pack Regulation § 923.322 Washington cherry handling regulation. (a) Grade. No handler shall...

  16. [Ergonomic analysis of the handle of manual instruments for dental hygiene].

    PubMed

    Migliario, Mario; Franchignoni, Marco; Soldati, Libero; Melle, Andrea; Carcieri, Paola; Ferriero, Giorgio

    2012-01-01

    Work-related musculoskeletal disorders of upper limbs are very common among dental hygienists. To minimize the risk of their occurrence, it is essential that attention be paid to proper ergonomics in the workplace, including the selection of instrumentation. At present there are no specific guidelines but only some indications for the selection of the different hand tools. The main purpose of this study was to make a comparative analysis of different types of handles of hand tools used for root planing (Gracey curettes). Nine dental hygienists were interviewed with a questionnaire aimed to assess three different types of curette handle. The results showed that lightness, being of solid steel, having a cylindrical non-uniform shape with full enlarged cross-section, and being silicon coated with non-slip ends are the preferred characteristics for a curette handle. These considerations may assist both manufacturers in designing new hand instruments and clinicians in selecting the most ergonomic ones to buy.

  17. Adverse events temporally associated with meningococcal vaccines.

    PubMed Central

    Yergeau, A; Alain, L; Pless, R; Robert, Y

    1996-01-01

    OBJECTIVE: To determine the incidence of severe adverse events temporally associated with meningococcal vaccines administered as part of a mass vaccination program. DESIGN: Retrospective descriptive study of events reported to a passive provincial surveillance system. SETTING: The province of Quebec. PARTICIPANTS: The 1,198,751 individuals aged 6 months to 20 years who were vaccinated against meningococcal disease between Dec. 27, 1992, and Mar. 31, 1993. OUTCOME MEASURES: Total numbers and rates of severe adverse events, including allergic reactions, anaphylactic reactions, neurological events (other than abnormal crying and screaming) and other serious or unusual events. RESULTS: A total of 118 reports of severe adverse events were selected from the surveillance system. The most frequent were allergic reactions (9.2 per 100,000 doses). Few anaphylactic or neurologic reactions were reported (0.1 and 0.5 per 100,000 doses respectively). There were no reports of sequelae or of encephalopathy, meningitis or encephalitis. CONCLUSION: Meningococcal vaccines seem to be associated with fewer adverse events than have previously been reported. Existing surveillance programs are useful for determining the incidence of adverse events temporally associated with vaccines. PMID:8630839

  18. Putative adverse outcome pathways relevant to neurotoxicity

    PubMed Central

    Bal-Price, Anna; Crofton, Kevin M.; Sachana, Magdalini; Shafer, Timothy J.; Behl, Mamta; Forsby, Anna; Hargreaves, Alan; Landesmann, Brigitte; Lein, Pamela J.; Louisse, Jochem; Monnet-Tschudi, Florianne; Paini, Alicia; Rolaki, Alexandra; Schrattenholz, André; Suñol, Cristina; van Thriel, Christoph; Whelan, Maurice; Fritsche, Ellen

    2016-01-01

    The Adverse Outcome Pathway (AOP) framework provides a template that facilitates understanding of complex biological systems and the pathways of toxicity that result in adverse outcomes (AOs). The AOP starts with an molecular initiating event (MIE) in which a chemical interacts with a biological target(s), followed by a sequential series of KEs, which are cellular, anatomical, and/or functional changes in biological processes, that ultimately result in an AO manifest in individual organisms and populations. It has been developed as a tool for a knowledge-based safety assessment that relies on understanding mechanisms of toxicity, rather than simply observing its adverse outcome. A large number of cellular and molecular processes are known to be crucial to proper development and function of the central (CNS) and peripheral nervous systems (PNS). However, there are relatively few examples of well-documented pathways that include causally linked MIEs and KEs that result in adverse outcomes in the CNS or PNS. As a first step in applying the AOP framework to adverse health outcomes associated with exposure to exogenous neurotoxic substances, the EU Reference Laboratory for Alternatives to Animal Testing (EURL ECVAM) organized a workshop (March 2013, Ispra, Italy) to identify potential AOPs relevant to neurotoxic and developmental neurotoxic outcomes. Although the AOPs outlined during the workshop are not fully described, they could serve as a basis for further, more detailed AOP development and evaluation that could be useful to support human health risk assessment in a variety of ways. PMID:25605028

  19. The Complement System and Adverse Pregnancy Outcomes

    PubMed Central

    Regal, Jean F.; Gilbert, Jeffrey S.; Burwick, Richard M.

    2015-01-01

    Adverse pregnancy outcomes significantly contribute to morbidity and mortality for mother and child, with lifelong health consequences for both. The innate and adaptive immune system must be regulated to insure survival of the feta allograft, and the complement system is no exception. An intact complement system optimizes placental development and function and is essential to maintain host defense and fetal survival. Complement regulation is apparent at the placental interface from early pregnancy with some degree of complement activation occurring normally throughout gestation. However, a number of pregnancy complications including early pregnancy loss, fetal growth restriction, hypertensive disorders of pregnancy and preterm birth are associated with excessive or misdirected complement activation, and are more frequent in women with inherited or acquired complement system disorders or complement gene mutations. Clinical studies employing complement biomarkers in plasma and urine implicate dysregulated complement activation in components of each of the adverse pregnancy outcomes. In addition, mechanistic studies in rat and mouse models of adverse pregnancy outcomes address the complement pathways or activation products of importance and allow critical analysis of the pathophysiology. Targeted complement therapeutics are already in use to control adverse pregnancy outcomes in select situations. A clearer understanding of the role of the complement system in both normal pregnancy and complicated or failed pregnancy will allow a rational approach to future therapeutic strategies for manipulating complement with the goal of mitigating adverse pregnancy outcomes, preserving host defense, and improving long term outcomes for both mother and child. PMID:25802092

  20. Is It Adverse, Nonadverse, Adaptive, or Artifact?

    PubMed

    Pandiri, Arun R; Kerlin, Roy L; Mann, Peter C; Everds, Nancy E; Sharma, Alok K; Myers, L Peyton; Steinbach, Thomas J

    2017-01-01

    One of the principal challenges facing a toxicologic pathologist is to determine and differentiate a true adverse effect from a nonadverse or an adaptive response. Recent publications from the Society of Toxicologic Pathology (STP) and the European STP provide guidance for determining and communicating adversity in nonclinical toxicology studies. In order to provide a forum to inform and engage in a discussion on this important topic, a continuing education (CE) course was held during the 2016 STP Annual meeting in San Diego, CA. The lectures at this course provided guidance on determining and communicating adversity using case studies involving both clinical pathology and anatomic pathology. In addition, one talk also focused on data quality, study design, and interpretation of artifacts that could hinder the determination of adversity. The CE course ended with a talk on understanding adversity in preclinical studies and engaging the regulatory agencies in the decision-making process. This manuscript is designed to provide brief summaries of all the talks in this well-received CE course.

  1. Environmental adversity and uncertainty favour cooperation

    PubMed Central

    Andras, Peter; Lazarus, John; Roberts, Gilbert

    2007-01-01

    Background A major cornerstone of evolutionary biology theory is the explanation of the emergence of cooperation in communities of selfish individuals. There is an unexplained tendency in the plant and animal world – with examples from alpine plants, worms, fish, mole-rats, monkeys and humans – for cooperation to flourish where the environment is more adverse (harsher) or more unpredictable. Results Using mathematical arguments and computer simulations we show that in more adverse environments individuals perceive their resources to be more unpredictable, and that this unpredictability favours cooperation. First we show analytically that in a more adverse environment the individual experiences greater perceived uncertainty. Second we show through a simulation study that more perceived uncertainty implies higher level of cooperation in communities of selfish individuals. Conclusion This study captures the essential features of the natural examples: the positive impact of resource adversity or uncertainty on cooperation. These newly discovered connections between environmental adversity, uncertainty and cooperation help to explain the emergence and evolution of cooperation in animal and human societies. PMID:18053138

  2. SpaceWire Data Handling Demonstration System

    NASA Astrophysics Data System (ADS)

    Mills, S.; Parkes, S. M.; O'Gribin, N.

    2007-08-01

    The SpaceWire standard was published in 2003 with the aim of providing a standard for onboard communications, defining the physical and data link layers of an interconnection, in order to improve reusability, reliability and to reduce the cost of mission development. The many benefits which it provides mean that it has already been used in a number of missions, both in Europe and throughout the world. Recent work by the SpaceWire community has included the development of higher level protocols for SpaceWire, such as the Remote Memory Access Protocol (RMAP) which can be used for many purposes, including the configuration of SpaceWire devices. Although SpaceWire has become very popular, the various ways in which it can be used are still being discovered, as are the most efficient ways to use it. At the same time, some in the space industry are not even aware of SpaceWire's existence. This paper describes the SpaceWire Data Handling Demonstration System that has been developed by the University of Dundee. This system simulates an onboard data handling network based on SpaceWire. It uses RMAP for all communication, and so demonstrates how SpaceWire and standardised higher level protocols can be used onboard a spacecraft. The system is not only a good advert for those who are unfamiliar with the benefits of SpaceWire, it is also a useful tool for those using SpaceWire to test ideas.

  3. Robotic liquid handling and automation in epigenetics.

    PubMed

    Gaisford, Wendy

    2012-10-01

    Automated liquid-handling robots and high-throughput screening (HTS) are widely used in the pharmaceutical industry for the screening of large compound libraries, small molecules for activity against disease-relevant target pathways, or proteins. HTS robots capable of low-volume dispensing reduce assay setup times and provide highly accurate and reproducible dispensing, minimizing variation between sample replicates and eliminating the potential for manual error. Low-volume automated nanoliter dispensers ensure accuracy of pipetting within volume ranges that are difficult to achieve manually. In addition, they have the ability to potentially expand the range of screening conditions from often limited amounts of valuable sample, as well as reduce the usage of expensive reagents. The ability to accurately dispense lower volumes provides the potential to achieve a greater amount of information than could be otherwise achieved using manual dispensing technology. With the emergence of the field of epigenetics, an increasing number of drug discovery companies are beginning to screen compound libraries against a range of epigenetic targets. This review discusses the potential for the use of low-volume liquid handling robots, for molecular biological applications such as quantitative PCR and epigenetics.

  4. Centralized FITS Metadata Handling Framework at ESO

    NASA Astrophysics Data System (ADS)

    Vera, I.; Dobrzycki, A.; Vuong, M.-H.; Brion, A.

    2011-07-01

    The European Organization for Astronomical Research in the Southern Hemisphere (ESO) headquartered in Garching, Germany, operates three state-of-the-art observatories in Chile: at La Silla, Paranal and Chajnantor. The observatories produce huge amounts of data, which are transferred to the ESO headquarters and stored in the ESO Archive. The archive also stores the products generated by pipeline processing of raw data by the ESO Quality Control (QC) group. In addition, the Archive also stores science products delivered by the principal investigators. Historically, these three processes were independent from one another which resulted in different metadata handling frameworks for each kind of product. This architecture led to duplicate efforts for building metadata-based services as well as creating challenging scenarios for integrating metadata from different processes. We present the metadata handling framework recently implemented at the European Southern Observatory, in which all metadata from FITS compliant sources are stored in a centralized repository database. The framework allows building metadata-based services in a descriptive way, transparently propagating any modifications/updates performed in the central repository. In addition, through a set of common functions, the framework allows for enrichment of FITS-based metadata with derived values and/or with metadata from other ESO operational databases.

  5. Adverse drug events: database construction and in silico prediction.

    PubMed

    Cheng, Feixiong; Li, Weihua; Wang, Xichuan; Zhou, Yadi; Wu, Zengrui; Shen, Jie; Tang, Yun

    2013-04-22

    Adverse drug events (ADEs) are the harms associated with uses of given medications at normal dosages, which are crucial for a drug to be approved in clinical use or continue to stay on the market. Many ADEs are not identified in trials until the drug is approved for clinical use, which results in adverse morbidity and mortality. To date, millions of ADEs have been reported around the world. Methods to avoid or reduce ADEs are an important issue for drug discovery and development. Here, we reported a comprehensive database of adverse drug events (namely MetaADEDB), which included more than 520,000 drug-ADE associations among 3059 unique compounds (including 1330 drugs) and 13,200 ADE items by data integration and text mining. All compounds and ADEs were annotated with the most commonly used concepts defined in Medical Subject Headings (MeSH). Meanwhile, a computational method, namely the phenotypic network inference model (PNIM), was developed for prediction of potential ADEs based on the database. The area under the receive operating characteristic curve (AUC) is more than 0.9 by 10-fold cross validation, while the AUC value was 0.912 for an external validation set extracted from the US-FDA Adverse Events Reporting System, which indicated that the prediction capability of the method was reliable. MetaADEDB is accessible free of charge at http://www.lmmd.org/online_services/metaadedb/. The database and the method provide us a useful tool to search for known side effects or predict potential side effects for a given drug or compound.

  6. Adverse health consequences of the Iraq War.

    PubMed

    Levy, Barry S; Sidel, Victor W

    2013-03-16

    The adverse health consequences of the Iraq War (2003-11) were profound. We conclude that at least 116,903 Iraqi non-combatants and more than 4800 coalition military personnel died over the 8-year course. Many Iraqi civilians were injured or became ill because of damage to the health-supporting infrastructure of the country, and about 5 million were displaced. More than 31,000 US military personnel were injured and a substantial percentage of those deployed suffered post-traumatic stress disorder, traumatic brain injury, and other neuropsychological disorders and their concomitant psychosocial problems. Many family members of military personnel had psychological problems. Further review of the adverse health consequences of this war could help to minimise the adverse health consequences of, and help to prevent, future wars.

  7. Standardizing drug adverse event reporting data.

    PubMed

    Wang, Liwei; Jiang, Guoqian; Li, Dingcheng; Liu, Hongfang

    2013-01-01

    Normalizing data in the Adverse Event Reporting System (AERS), an FDA database, would improve the mining capacity of AERS for drug safety signal detection. In this study, we aim to normalize AERS and build a publicly available normalized Adverse drug events (ADE) data source.he drug information in AERS is normalized to RxNorm, a standard terminology source for medication. Drug class information is then obtained from the National Drug File - Reference Terminology (NDF-RT). Adverse drug events (ADE) are aggregated through mapping with the PT (Preferred Term) and SOC (System Organ Class) codes of MedDRA. Our study yields an aggregated knowledge-enhanced AERS data mining set (AERS-DM). The AERS-DM could provide more perspectives to mine AERS database for drug safety signal detection and could be used by research community in the data mining field.

  8. [Adverse reaction to not iodinated contrast].

    PubMed

    Palma-Gómez, Samuel; González-Díaz, Sandra Nora; Arias-Cruz, Alfredo; Macías-Weinmann, Alejandra; Amaro-Vivian, Laura Elizabeth; Pérez-Vanzzini, Rafael; Gutiérrez-Mujica, José Julio; Yong-Rodríguez, Adrián

    2014-01-01

    Adverse reactions to drugs are relatively frequent in clinical practice, and some of them can be life threatening. Reactions to contrast material (CM) represent an important percentage of these adverse reactions. It has been found that 70% of reactions to contrast material happen within the first five minutes of their administration. Despite the fact that hypersensitivity reactions are traditionally classified as non-allergic, in recent years investigators have reported positive skin prick tests in patients with immediate and late reactions to contrast material. This paper reports the case of a female patient with non-Hodgkin lymphoma that has presented on two distinct occasions adverse reactions to contrast material. We discuss on the type of reaction, severity, suggested prophylaxis, prognosis and recommendations, keeping in mind the underlying disease and the need to have further image studies performed.

  9. Adverse events related to blood transfusion.

    PubMed

    Sahu, Sandeep; Hemlata; Verma, Anupam

    2014-09-01

    The acute blood transfusion reactions are responsible for causing most serious adverse events. Awareness about various clinical features of acute and delayed transfusion reactions with an ability to assess the serious reactions on time can lead to a better prognosis. Evidence-based medicine has changed today's scenario of clinical practice to decrease adverse transfusion reactions. New evidence-based algorithms of transfusion and improved haemovigilance lead to avoidance of unnecessary transfusions perioperatively. The recognition of adverse events under anaesthesia is always challenging. The unnecessary blood transfusions can be avoided with better blood conservation techniques during surgery and with anaesthesia techniques that reduce blood loss. Better and newer blood screening methods have decreased the infectious complications to almost negligible levels. With universal leukoreduction of red blood cells (RBCs), selection of potential donors such as use of male donors only plasma and restriction of RBC storage, most of the non-infectious complications can be avoided.

  10. Adverse perinatal events associated with ART.

    PubMed

    Skora, Daniel; Frankfurter, David

    2012-04-01

    Since the advent of ART, much research has focused on the potential adverse for resultant harm. Prematurity, low birth-weight, PIH, congenital malformations, and CP are closely tied to multiple gestation. With the increase in elective single embryo transfer, there will be a reduction in adversity related to multiple birth. It is understood that underlying causes of infertility, including advanced maternal age, PCOS, thyroid disease, and uterine fibroids, predispose to adverse outcomes. However, imprinting abnormalities do not appear to stem from multiple births, and thus the need to consider the association between fertility treatment and methylation disorders remains essential. These, as well as risks of multi-fetal gestation, must be discussed with patients when considering using assisted reproduction.

  11. Early Adverse Experiences and the Developing Brain

    PubMed Central

    Bick, Johanna; Nelson, Charles A

    2016-01-01

    Children exposed to various forms of adversity early in life are at increased risk for a broad range of developmental difficulties, affecting both cognitive and emotional adjustment. We review a growing body of evidence suggesting that exposure to adverse circumstances affects the developing brain in ways that increase risk for a myriad of problems. We focus on two forms of adversity, one in which children are exposed to childhood maltreatment in family environments, and another in which children are exposed to extreme psychosocial deprivation in contexts of institutional rearing. We discuss ways in which each of these experiences represent violations of species-expected caregiving conditions, thereby imposing challenges to the developing brain. We also review emerging data pointing to the effectiveness of early intervention in remediating neurodevelopmental consequences associated with maltreatment or institutional rearing. We conclude by discussing implications of this work for public health efforts and highlight important directions for the field. PMID:26334107

  12. Mars Sample Handling Protocol Workshop Series: Workshop 2a (Sterilization)

    NASA Technical Reports Server (NTRS)

    Rummel, John D. (Editor); Brunch, Carl W. (Editor); Setlow, Richard B. (Editor); DeVincenzi, Donald L. (Technical Monitor)

    2001-01-01

    The Space Studies Board of the National Research Council provided a series of recommendations to NASA on planetary protection requirements for future Mars sample return missions. One of the Board's key findings suggested, although current evidence of the martian surface suggests that life as we know it would not tolerate the planet's harsh environment, there remain 'plausible scenarios for extant microbial life on Mars.' Based on this conclusion, all samples returned from Mars should be considered potentially hazardous until it has been demonstrated that they are not. In response to the National Research Council's findings and recommendations, NASA has undertaken a series of workshops to address issues regarding NASA's proposed sample return missions. Work was previously undertaken at the Mars Sample Handling and Protocol Workshop 1 (March 2000) to formulate recommendations on effective methods for life detection and/or biohazard testing on returned samples. The NASA Planetary Protection Officer convened the Mars Sample Sterilization Workshop, the third in the Mars Sample Handling Protocol Workshop Series, on November 28-30, 2000 at the Holiday Inn Rosslyn Westpark, Arlington, Virginia. Because of the short timeframe between this Workshop and the second Workshop in the Series, which was convened in October 2000 in Bethesda, Maryland, they were developed in parallel, so the Sterilization Workshop and its report have therefore been designated as '2a'). The focus of Workshop 2a was to make recommendations for effective sterilization procedures for all phases of Mars sample return missions, and to answer the question of whether we can sterilize samples in such a way that the geological characteristics of the samples are not significantly altered.

  13. Polarization dictates iron handling by inflammatory and alternatively activated macrophages

    PubMed Central

    Corna, Gianfranca; Campana, Lara; Pignatti, Emanuele; Castiglioni, Alessandra; Tagliafico, Enrico; Bosurgi, Lidia; Campanella, Alessandro; Brunelli, Silvia; Manfredi, Angelo A.; Apostoli, Pietro; Silvestri, Laura; Camaschella, Clara; Rovere-Querini, Patrizia

    2010-01-01

    Background Macrophages play a key role in iron homeostasis. In peripheral tissues, they are known to polarize into classically activated (or M1) macrophages and alternatively activated (or M2) macrophages. Little is known on whether the polarization program influences the ability of macrophages to store or recycle iron and the molecular machinery involved in the processes. Design and Methods Inflammatory/M1 and alternatively activated/M2 macrophages were propagated in vitro from mouse bone-marrow precursors and polarized in the presence of recombinant interferon-γ or interleukin-4. We characterized and compared their ability to handle radioactive iron, the characteristics of the intracellular iron pools and the expression of molecules involved in internalization, storage and export of the metal. Moreover we verified the influence of iron on the relative ability of polarized macrophages to activate antigen-specific T cells. Results M1 macrophages have low iron regulatory protein 1 and 2 binding activity, express high levels of ferritin H, low levels of transferrin receptor 1 and internalize – albeit with low efficiency -iron only when its extracellular concentration is high. In contrast, M2 macrophages have high iron regulatory protein binding activity, express low levels of ferritin H and high levels of transferrin receptor 1. M2 macrophages have a larger intracellular labile iron pool, effectively take up and spontaneously release iron at low concentrations and have limited storage ability. Iron export correlates with the expression of ferroportin, which is higher in M2 macrophages. M1 and M2 cells activate antigen-specific, MHC class II-restricted T cells. In the absence of the metal, only M1 macrophages are effective. Conclusions Cytokines that drive macrophage polarization ultimately control iron handling, leading to the differentiation of macrophages into a subset which has a relatively sealed intracellular iron content (M1) or into a subset endowed with

  14. METHOD AND APPARATUS FOR HANDLING RADIOACTIVE PRODUCTS

    DOEpatents

    Nicoll, D.

    1959-02-24

    A device is described for handling fuel elements being discharged from a nuclear reactor. The device is adapted to be disposed beneath a reactor within the storage canal for spent fuel elements. The device is comprised essentially of a cylinder pivotally mounted to a base for rotational motion between a vertical position. where the mouth of the cylinder is in the top portion of the container for receiving a fuel element discharged from a reactor into the cylinder, and a horizontal position where the mouth of the cylinder is remote from the top portion of the container and the fuel element is discharged from the cylinder into the storage canal. The device is operated by hydraulic pressure means and is provided with a means to prevent contaminated primary liquid coolant in the reactor system from entering the storage canal with the spent fuel element.

  15. Obstetric handling of a deaf patient.

    PubMed

    Mustafa, M S; Addar, M H

    2000-12-01

    We report our experience of obstetric handling of a deaf pregnant patient antenatally, in labor and postpartum. The patient was deaf from childhood. The attending obstetrician had no training in the necessary skills for communication with the deaf. Fortunately, the patient could read and write English very well and communication was carried out through pen and paper. This proved to be difficult, time-consuming and required a lot of patience. The clinical, psychological and human aspects of the management were gratifying. The patient brought up interesting aspects that need to be considered when dealing with similar patients. Experience of deaf mothers and their ingenious approaches in dealing with babies, in the postpartum period, are quoted in this communication.

  16. Protocols for Handling Messages Between Simulation Computers

    NASA Technical Reports Server (NTRS)

    Balcerowski, John P.; Dunnam, Milton

    2006-01-01

    Practical Simulator Network (PSimNet) is a set of data-communication protocols designed especially for use in handling messages between computers that are engaging cooperatively in real-time or nearly-real-time training simulations. In a typical application, computers that provide individualized training at widely dispersed locations would communicate, by use of PSimNet, with a central host computer that would provide a common computational- simulation environment and common data. Originally intended for use in supporting interfaces between training computers and computers that simulate the responses of spacecraft scientific payloads, PSimNet could be especially well suited for a variety of other applications -- for example, group automobile-driver training in a classroom. Another potential application might lie in networking of automobile-diagnostic computers at repair facilities to a central computer that would compile the expertise of numerous technicians and engineers and act as an expert consulting technician.

  17. Method and system rapid piece handling

    DOEpatents

    Spletzer, Barry L.

    1996-01-01

    The advent of high-speed fabric cutters has made necessary the development of automated techniques for the collection and sorting of garment pieces into collated piles of pieces ready for assembly. The present invention enables a new method for such handling and sorting of garment parts, and to apparatus capable of carrying out this new method. The common thread is the application of computer-controlled shuttling bins, capable of picking up a desired piece of fabric and dropping it in collated order for assembly. Such apparatus with appropriate computer control relieves the bottleneck now presented by the sorting and collation procedure, thus greatly increasing the overall rate at which garments can be assembled.

  18. Error handling strategies in multiphase inverse modeling

    SciTech Connect

    Finsterle, S.; Zhang, Y.

    2010-12-01

    Parameter estimation by inverse modeling involves the repeated evaluation of a function of residuals. These residuals represent both errors in the model and errors in the data. In practical applications of inverse modeling of multiphase flow and transport, the error structure of the final residuals often significantly deviates from the statistical assumptions that underlie standard maximum likelihood estimation using the least-squares method. Large random or systematic errors are likely to lead to convergence problems, biased parameter estimates, misleading uncertainty measures, or poor predictive capabilities of the calibrated model. The multiphase inverse modeling code iTOUGH2 supports strategies that identify and mitigate the impact of systematic or non-normal error structures. We discuss these approaches and provide an overview of the error handling features implemented in iTOUGH2.

  19. Fuel handling system for a nuclear reactor

    DOEpatents

    Saiveau, James G.; Kann, William J.; Burelbach, James P.

    1986-01-01

    A pool type nuclear fission reactor has a core, with a plurality of core elements and a redan which confines coolant as a hot pool at a first end of the core separated from a cold pool at a second end of the core by the redan. A fuel handling system for use with such reactors comprises a core element storage basket located outside of the redan in the cold pool. An access passage is formed in the redan with a gate for opening and closing the passage to maintain the temperature differential between the hot pool and the cold pool. A mechanism is provided for opening and closing the gate. A lifting arm is also provided for manipulating the fuel core elements through the access passage between the storage basket and the core when the redan gate is open.

  20. Fuel handling system for a nuclear reactor

    DOEpatents

    Saiveau, James G.; Kann, William J.; Burelbach, James P.

    1986-12-02

    A pool type nuclear fission reactor has a core, with a plurality of core elements and a redan which confines coolant as a hot pool at a first end of the core separated from a cold pool at a second end of the core by the redan. A fuel handling system for use with such reactors comprises a core element storage basket located outside of the redan in the cold pool. An access passage is formed in the redan with a gate for opening and closing the passage to maintain the temperature differential between the hot pool and the cold pool. A mechanism is provided for opening and closing the gate. A lifting arm is also provided for manipulating the fuel core elements through the access passage between the storage basket and the core when the redan gate is open.

  1. Translator for Optimizing Fluid-Handling Components

    NASA Technical Reports Server (NTRS)

    Landon, Mark; Perry, Ernest

    2007-01-01

    A software interface has been devised to facilitate optimization of the shapes of valves, elbows, fittings, and other components used to handle fluids under extreme conditions. This software interface translates data files generated by PLOT3D (a NASA grid-based plotting-and- data-display program) and by computational fluid dynamics (CFD) software into a format in which the files can be read by Sculptor, which is a shape-deformation- and-optimization program. Sculptor enables the user to interactively, smoothly, and arbitrarily deform the surfaces and volumes in two- and three-dimensional CFD models. Sculptor also includes design-optimization algorithms that can be used in conjunction with the arbitrary-shape-deformation components to perform automatic shape optimization. In the optimization process, the output of the CFD software is used as feedback while the optimizer strives to satisfy design criteria that could include, for example, improved values of pressure loss, velocity, flow quality, mass flow, etc.

  2. Missing data handling in chronic pain trials.

    PubMed

    Kim, Yongman

    2011-03-01

    In chronic pain trials, proper handling of missing data due to dropout is an important issue because the dropout rate is high and the study conclusion may depend on the method chosen. The intent-to-treat (ITT) principle usually requires imputations for missing data to include the dropouts as well as completers in the statistical analysis. However, a statistical analysis with imputation might lead to a misinterpretation of clinical data. In chronic pain trials, treatment-related dropouts are clinical outcomes themselves. For example, an early dropout due to toxicity usually indicates a treatment failure, as does a dropout due to lack of efficacy. Problems with traditional methods such as last observation carried forward (LOCF) or baseline observation carried forward (BOCF) are identified especially in the chronic pain setting. Alternative methods, such as continuous responder analysis and two-part model analysis, treating dropouts as clinical events, are introduced with an example of osteoarthritis clinical trial data.

  3. Primer on tritium safe handling practices

    SciTech Connect

    Not Available

    1994-12-01

    This Primer is designed for use by operations and maintenance personnel to improve their knowledge of tritium safe handling practices. It is applicable to many job classifications and can be used as a reference for classroom work or for self-study. It is presented in general terms for use throughout the DOE Complex. After reading it, one should be able to: describe methods of measuring airborne tritium concentration; list types of protective clothing effective against tritium uptake from surface and airborne contamination; name two methods of reducing the body dose after a tritium uptake; describe the most common method for determining amount of tritium uptake in the body; describe steps to take following an accidental release of airborne tritium; describe the damage to metals that results from absorption of tritium; explain how washing hands or showering in cold water helps reduce tritium uptake; and describe how tritium exchanges with normal hydrogen in water and hydrocarbons.

  4. Electronic Publishing or Electronic Information Handling?

    NASA Astrophysics Data System (ADS)

    Heck, A.

    The current dramatic evolution in information technology is bringing major modifications in the way scientists communicate. The concept of 'electronic publishing' is too restrictive and has often different, sometimes conflicting, interpretations. It is thus giving way to the broader notion of 'electronic information handling' encompassing the diverse types of information, the different media, as well as the various communication methodologies and technologies. New problems and challenges result also from this new information culture, especially on legal, ethical, and educational grounds. The procedures for validating 'published material' and for evaluating scientific activities will have to be adjusted too. 'Fluid' information is becoming a common concept. Electronic publishing cannot be conceived without link to knowledge bases nor without intelligent information retrieval tools.

  5. Database Handling Software and Scientific Applications.

    ERIC Educational Resources Information Center

    Gabaldon, Diana J.

    1984-01-01

    Discusses the general characteristics of database management systems and file systems. Also gives a basic framework for evaluating such software and suggests characteristics that should be considered when buying software for specific scientific applications. A list of vendor addresses for popular database management systems is included. (JN)

  6. Enduring psychobiological effects of childhood adversity.

    PubMed

    Ehlert, Ulrike

    2013-09-01

    This mini-review refers to recent findings on psychobiological long-term consequences of childhood trauma and adverse living conditions. The continuum of trauma-provoked aftermath reaches from healthy adaptation with high resilience, to severe maladjustment with co-occurring psychiatric and physical pathologies in children, adolescents and adults. There is increasing evidence of a strong interconnectivity between genetic dispositions, epigenetic processes, stress-related hormonal systems and immune parameters in all forms of (mal)-adjustment to adverse living conditions. Unfavorable constellations of these dispositions and systems, such as low cortisol levels and elevated markers of inflammation in maltreated children, seem to promote the (co)-occurrence of psychiatric and physical pathologies such as posttraumatic stress disorder, obesity, or diabetes. Although findings from prospective study designs support a deepened understanding of causal relations between adverse living conditions, including traumatic experiences, during childhood and its psychobiological effects, so far, little is known about the temporal coincidence of stress-sensitive developmental stages during childhood and adolescence and trauma consequences. Taken together, childhood adversity is a severe risk factor for the onset of psychobiological (mal)-adjustment, which has to be explained under consideration of diverse physiological systems and developmental stages of childhood and adolescence.

  7. Reducing Adverse Impact: One City's Efforts.

    ERIC Educational Resources Information Center

    Prewitt, Jeff

    Following a workshop on "Innovations in Employment Testing that Improve Validity and Reduce Adverse Impact," the City of Louisville (Kentucky) implemented a strategy to develop a comprehensive testing and recruiting program for police recruits. To improve candidate expectations and preparation, the following activities were undertaken:…

  8. Educational Leadership: The Uses of Adversity

    ERIC Educational Resources Information Center

    Culbertson, Jack

    1976-01-01

    Skepticism about the power of education challenges the educational administrator to (1) attain a better understanding of the sources of dissatisfaction and their implications for change, (2) learn to cope with adversity and make constructive use of it, and (3) define the leadership requirements needed to address education's problems. (MB)

  9. The adverse outcome pathway knowledge base

    EPA Science Inventory

    The rapid advancement of the Adverse Outcome Pathway (AOP) framework has been paralleled by the development of tools to store, analyse, and explore AOPs. The AOP Knowledge Base (AOP-KB) project has brought three independently developed platforms (Effectopedia, AOP-Wiki, and AOP-X...

  10. Clinical spectrum of adverse reactions to tartrazine.

    PubMed

    Collins-Williams, C

    1985-01-01

    Tartrazine, a common additive in foods and drugs, often causes adverse reactions such as recurrent urticaria, angioedema, and asthma and is frequently implicated in hyperkinesis. This paper summarizes the recent literature on the subject and outlines a practical approach for the practicing physician to diagnose and treat these patients in an optimal manner.

  11. The Public Health Burden of Early Adversity

    ERIC Educational Resources Information Center

    Schlueter, Lisa J.; Watamura, Sarah Enos

    2017-01-01

    Severe and chronic stress in early childhood has enormous physical and mental health costs across an individual's lifespan. Unfortunately, exposure to early life adversity is common, and costs accrue to individuals and society. This article highlights several promising approaches to buffer children from the negative health consequences associated…

  12. [Analysis of Spontaneously Reported Adverse Events].

    PubMed

    Nakamura, Mitsuhiro

    2016-01-01

    Observational study is necessary for the evaluation of drug effectiveness in clinical practice. In recent years, the use of spontaneous reporting systems (SRS) for adverse drug reactions has increased and they have become an important resource for regulatory science. SRS, being the largest and most well-known databases worldwide, are one of the primary tools used for postmarketing surveillance and pharmacovigilance. To analyze SRS, the US Food and Drug Administration Adverse Event Reporting System (FAERS) and the Japanese Adverse Drug Event Report Database (JADER) are reviewed. Authorized pharmacovigilance algorithms were used for signal detection, including the reporting odds ratio. An SRS is a passive reporting database and is therefore subject to numerous sources of selection bias, including overreporting, underreporting, and a lack of a denominator. Despite the inherent limitations of spontaneous reporting, SRS databases are a rich resource and data mining index that provide powerful means of identifying potential associations between drugs and their adverse effects. Our results, which are based on the evaluation of SRS databases, provide essential knowledge that could improve our understanding of clinical issues.

  13. Adverse skin reactions following intravitreal bevacizumab injection

    PubMed Central

    Ameen, S; Entabi, M; Lee, N; Stavrakoglou, A

    2011-01-01

    The authors describe two separate cases of skin eruption following intravitreal bevacizumab injection with evidence to suggest that these were adverse drug reactions to bevacizumab. The authors also discuss how each case was treated and report on the final outcome. PMID:22715260

  14. Due Process in Adverse Personnel Action.

    ERIC Educational Resources Information Center

    Scriven, Michael

    1997-01-01

    A detailed checklist and timeline for ensuring due process are provided for adverse personnel actions, and the need to supplement this with expert, same-jurisdiction legal advice is stressed. This approach emphasizes the importance of treating due process as an ethical as well as a legal requirement. (SLD)

  15. Adverse outcome pathway (AOP) development and evaluation

    EPA Science Inventory

    The Adverse Outcome Pathway provides a construct for assembling mechanistic information at different levels of biological organization in a form designed to support regulatory decision making. In particular, it frames the link between molecular and cellular events that can be mea...

  16. [Laser trabeculoplasty: therapeutic options and adverse effects].

    PubMed

    Wacker, T; Eckert, S

    2010-01-01

    Laser trabeculoplasty is a simple method for treating glaucoma and ocular hypertension and has few adverse effects. There are different laser systems for reducing the intraocular pressure of patients with glaucoma and ocular hypertension. Complications include transient intraocular pressure elevation, iritis, and anterior synechiae.

  17. Resilience in the Face of Adversity.

    ERIC Educational Resources Information Center

    Patterson, Jerry

    2001-01-01

    "Resilience" is the capacity for moving ahead under adverse circumstances. School superintendents are advised to stay upbeat and mindful of "both-and" opportunities; stay focused on what they care about; remain flexible and tolerant of ambiguity; be proactive, not reactive; and apply resilience-conserving strategies during…

  18. Safety Enhancements for TRU Waste Handling - 12258

    SciTech Connect

    Cannon, Curt N.

    2012-07-01

    For years, proper Health Physics practices and 'As Low As Reasonably Achievable' (ALARA) principles have fostered the use of glove boxes or other methods of handling (without direct contact) high activities of radioactive material. The physical limitations of using glove boxes on certain containers have resulted in high-activity wastes being held in storage awaiting a path forward. Highly contaminated glove boxes and other remote handling equipment no longer in use have also been added to the growing list of items held for storage with no efficient method of preparation for proper disposal without creating exposure risks to personnel. This is especially true for wastes containing alpha-emitting radionuclides such as Plutonium and Americium that pose significant health risks to personnel if these Transuranic (TRU) wastes are not controlled effectively. Like any good safety program or root cause investigation PFNW has found that the identification of the cause of a negative change, if stopped, can result in a near miss and lessons learned. If this is done in the world of safety, it is considered a success story and is to be shared with others to protect the workers. PFNW believes that the tools, equipment and resources have improved over the past number of years but that the use of them has not progressed at the same rate. If we use our tools to timely identify the effect on the work environment and immediately following or possibly even simultaneously identify the cause or some of the causal factors, we may have the ability to continue to work rather than succumb to the start and stop-work mentality trap that is not beneficial in waste minimization, production efficiency or ALARA. (authors)

  19. Overview on Hydrate Coring, Handling and Analysis

    SciTech Connect

    Jon Burger; Deepak Gupta; Patrick Jacobs; John Shillinglaw

    2003-06-30

    Gas hydrates are crystalline, ice-like compounds of gas and water molecules that are formed under certain thermodynamic conditions. Hydrate deposits occur naturally within ocean sediments just below the sea floor at temperatures and pressures existing below about 500 meters water depth. Gas hydrate is also stable in conjunction with the permafrost in the Arctic. Most marine gas hydrate is formed of microbially generated gas. It binds huge amounts of methane into the sediments. Worldwide, gas hydrate is estimated to hold about 1016 kg of organic carbon in the form of methane (Kvenvolden et al., 1993). Gas hydrate is one of the fossil fuel resources that is yet untapped, but may play a major role in meeting the energy challenge of this century. In June 2002, Westport Technology Center was requested by the Department of Energy (DOE) to prepare a ''Best Practices Manual on Gas Hydrate Coring, Handling and Analysis'' under Award No. DE-FC26-02NT41327. The scope of the task was specifically targeted for coring sediments with hydrates in Alaska, the Gulf of Mexico (GOM) and from the present Ocean Drilling Program (ODP) drillship. The specific subjects under this scope were defined in 3 stages as follows: Stage 1: Collect information on coring sediments with hydrates, core handling, core preservation, sample transportation, analysis of the core, and long term preservation. Stage 2: Provide copies of the first draft to a list of experts and stakeholders designated by DOE. Stage 3: Produce a second draft of the manual with benefit of input from external review for delivery. The manual provides an overview of existing information available in the published literature and reports on coring, analysis, preservation and transport of gas hydrates for laboratory analysis as of June 2003. The manual was delivered as draft version 3 to the DOE Project Manager for distribution in July 2003. This Final Report is provided for records purposes.

  20. Chemotherapy drug handling in first opinion small animal veterinary practices in the United Kingdom: results of a questionnaire survey.

    PubMed

    Edery, E G

    2017-03-07

    To investigate how first opinion small animal veterinary surgeons in the UK handled chemotherapeutic agents, a questionnaire was distributed at the 2014 British Small Animal Veterinary Association congress and by internet. Chemotherapy was regularly offered by 70.4 per cent of the respondents. Gold standards defined according to available guidelines for safe handling of antineoplastic drugs were poorly followed by general practitioners with only 2 per cent of respondents complying with all of them. Dedicated facilities for preparation and administration of cytotoxic drugs were variably available among participants. The level of training of staff indirectly involved in handling chemotherapy was appropriate in less than 50 per cent of practices. No association was found between demographic characteristics of the sampled population and the decision to perform chemotherapy. The results of this study raise concerns about the safety of the veterinary staff in first opinion practices involved in handling chemotherapy.

  1. The Effect of Work Hours on Adverse Events and Errors in Health Care

    PubMed Central

    Olds, Danielle M.; Clarke, Sean P.

    2010-01-01

    Introduction We studied the relationship between registered nurses' extended work duration with adverse events and errors, including needlestick injuries, work-related injuries, patient falls with injury, nosocomial infections, and medication errors. Method Using bivariate and multivariate logistic regression, this secondary analysis of 11,516 registered nurses examined nurse characteristics, work hours, and adverse events and errors. Results All of the adverse event and error variables were significantly related to working more than 40 hours in the average week. Medication errors and needlestick injuries had the strongest and most consistent relationships with the work hour and voluntary overtime variables. Discussion This study confirms prior findings that increased work hours raise the likelihood of adverse events and errors in healthcare, and further found the same relationship with voluntary overtime. Impact on Industry Legislation has focused on mandatory overtime; however, this study demonstrated that voluntary overtime could also negatively impact nurse and patient safety. PMID:20497801

  2. Epidemiologists and adverse event data--a challenge to the field.

    PubMed

    Bortnichak, E A; Dai, W S

    1999-10-01

    Spontaneous adverse event reports, albeit biased and incomplete data, remain very important and, frequently, are the sole data source to rely on during the postmarketing phase for regulatory decision making. However, little progress has been made in the past decade to improve the utility of these essential data. Further research that helps to improve our understanding of the extent and characteristics of adverse event reporting should be done to ensure the maximum, appropriate utilization of this highly cost-efficient data source. In addition, the authors challenge that research can and should be done to advance our understanding of the behaviour and motivations of those who report adverse events so as to improve the quality and the quantity of meaningful spontaneous adverse event reports.

  3. The use of ground based simulation for handling qualities research: A new assessment

    NASA Technical Reports Server (NTRS)

    Mitchell, David G.; Hoh, Roger H.; Atencio, Adolph, Jr.; Key, David L.

    1992-01-01

    A study was conducted on the NASA Ames Research Center's Vertical Motion Simulator to determine the effects of simulator characteristics on perceived handling characteristics. Differences in pilot opinion were found as the visual and motion parameters were changed, reflecting a change in the pilots' perceptions of handling qualities, rather than changes in the aircraft model itself. The results indicate a need for tailoring the motion without dynamics to suit the task, with reduced washouts for precision maneuvering as compared to aggressive maneuvering. Visual delay data are inconclusive, but suggest that it may be better to allow some time delay in the visual path to minimize the mismatch between vision and motion, rather than eliminate the visual delay entirely through lead compensation. The simulation results are compared with ratings from a similar in-flight simulation experiment.

  4. Analysis of flexible aircraft longitudinal dynamics and handling qualities. Volume 1: Analysis methods

    NASA Technical Reports Server (NTRS)

    Waszak, M. R.; Schmidt, D. S.

    1985-01-01

    As aircraft become larger and lighter due to design requirements for increased payload and improved fuel efficiency, they will also become more flexible. For highly flexible vehicles, the handling qualities may not be accurately predicted by conventional methods. This study applies two analysis methods to a family of flexible aircraft in order to investigate how and when structural (especially dynamic aeroelastic) effects affect the dynamic characteristics of aircraft. The first type of analysis is an open loop model analysis technique. This method considers the effects of modal residue magnitudes on determining vehicle handling qualities. The second method is a pilot in the loop analysis procedure that considers several closed loop system characteristics. Volume 1 consists of the development and application of the two analysis methods described above.

  5. Neonatal handling causes impulsive behavior and decreased pharmacological response to methylphenidate in male adult wistar rats.

    PubMed

    Lazzaretti, Camilla; Kincheski, Grasielle Clotildes; Pandolfo, Pablo; Krolow, Rachel; Toniazzo, Ana Paula; Arcego, Danusa Mar; Couto-Pereira, Natividade de Sá; Zeidán-Chuliá, Fares; Galvalisi, Martin; Costa, Gustavo; Scorza, Cecilia; Souza, Tadeu Mello E; Dalmaz, Carla

    2016-03-01

    Neonatal handling has an impact on adult behavior of experimental animals and is associated with rapid and increased palatable food ingestion, impaired behavioral flexibility, and fearless behavior to novel environments. These symptoms are characteristic features of impulsive trait, being controlled by the medial prefrontal cortex (mPFC). Impulsive behavior is a key component of many psychiatric disorders such as attention deficit hyperactivity disorder (ADHD), manic behavior, and schizophrenia. Others have reported a methylphenidate (MPH)-induced enhancement of mPFC functioning and improvements in behavioral core symptoms of ADHD patients. The aims of the present study were: (i) to find in vivo evidence for an association between neonatal handling and the development of impulsive behavior in adult Wistar rats and (ii) to test whether neonatal handling could have an impact on monoamine levels in the mPFC and the pharmacological response to MPH in vivo. Therefore, experimental animals (litters) were classified as: "non-handled" and "handled" (10[Formula: see text]min/day, postnatal days 1-10). After puberty, they were exposed to either a larger and delayed or smaller and immediate reward (tolerance to delay of reward task). Acute MPH (3[Formula: see text]mg/Kg. i.p.) was used to suppress and/or regulate impulsive behavior. Our results show that only neonatally handled male adult Wistar rats exhibit impulsive behavior with no significant differences in monoamine levels in the medial prefrontal cortex, together with a decreased response to MPH. On this basis, we postulate that early life interventions may have long-term effects on inhibitory control mechanisms and affect the later response to pharmacological agents during adulthood.

  6. Predictors of adherence to safe handling practices for antineoplastic drugs: A survey of hospital nurses.

    PubMed

    Silver, Sharon R; Steege, Andrea L; Boiano, James M

    2016-01-01

    Despite growing awareness of the hazards of exposure to antineoplastic drugs (ADs), surveys continue to find incomplete adherence to recommended safe handling guidelines. A 2011 survey of healthcare workers presents an opportunity to examine factors associated with adherence among 1094 hospital nurses who administered ADs. Data for these hypothesis-generating analyses were taken from an anonymous, web-based survey of healthcare workers. Regression modeling was used to examine associations between a number of predictors (engineering controls, work practices, nurse perceptions, and nurse and hospital characteristics) and three outcomes reported by nurses: use of personal protective equipment (PPE); activities performed with gloves previously worn to administer ADs; and spills of ADs. Adherence to safe handling guidelines was not universal, and AD spills were reported by 9.5% of nurses during the week prior to the survey. Familiarity with safe handling guidelines and training in safe handling were associated with more reported PPE use. Nurse-perceived availability of PPE was associated with more reported PPE use and lower odds of reported spills. Use of closed system drug-transfer devices and luer-lock fittings also decreased the odds of self-reported AD spills, while more frequent AD administration increased the risk. AD administration frequency was also associated with performing more activities with gloves previously worn to administer ADs, and nurse perception of having adequate time for taking safety precautions with fewer such activities. The results suggest that training and familiarity with guidelines for safe handling of ADs, adequate time to adhere to guidelines, and availability of PPE and certain engineering controls are key to ensuring adherence to safe handling practices. Further assessment of training components and engineering controls would be useful for tailoring interventions targeting these areas.

  7. How Surface Treatments Enhance Ground Handling

    NASA Technical Reports Server (NTRS)

    Yager, Thomas J.

    2002-01-01

    Several runway surface treatments developed in recent years are described in terms of how aircraft tire landing and takeoff friction requirements are met, particularly during adverse weather conditions. Changing the surface texture with grooving, grinding and shot peening, use of chemicals to remove or prevent accumulation of natural or man-made contaminants, and the use of new techniques and materials are discussed as means of improving surface friction performance. Test data are presented to illustrate the effects of runway conditions on aircraft ground performance. The severity of the problem of operating on runway surfaces which cannot provide sufficient aircraft tire friction capability is also illustrated from documented aircraft accident/incident reports. The paper concludes with recommendations for future pavement research activities.

  8. Effects of handle orientation, gloves, handle friction and elbow posture on maximum horizontal pull and push forces.

    PubMed

    Seo, Na Jin; Armstrong, Thomas J; Young, Justin G

    2010-01-01

    Biomechanical models were evaluated for effects of handle orientation, handle material, gloves and arm posture on maximal pull/push force. Eight healthy subjects performed maximum pull/push exertions on handles with two different orientations and two different surface materials, using bare hand and two types of glove as well as two arm postures. The empirical data supported the proposed biomechanical models: Pull/push forces for the bare hand on a rubber handle decreased 10% when the handle was parallel to the pull/push direction, compared with when perpendicular to it. For parallel handles, pull/push forces further decreased with decreasing hand-handle friction coefficient (simulated by different handle materials and gloves). Pull force exerted by the bare hand was 29% greater when the elbow was extended than when flexed. Pull force was greater than push force (with bare hand and flexed elbow). The biomechanical models suggest that friction between the hand and handle limits pull/push forces for parallel handles. Elbow strength may be responsible for decreased pull force for the flexed elbow posture and decreased force for pull compared with push in the postures examined. STATEMENT OF RELEVANCE: Biomechanical models presented in this paper provide insights for causes of upper extremity strength limitations during pull/push tasks. Findings in this paper can be used directly in the design of workstation and objects to reduce fatigue and risk of musculoskeletal disorders.

  9. 21 CFR 606.170 - Adverse reaction file.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 7 2013-04-01 2013-04-01 false Adverse reaction file. 606.170 Section 606.170... Adverse reaction file. (a) Records shall be maintained of any reports of complaints of adverse reactions... thorough investigation of each reported adverse reaction shall be made. A written report of...

  10. 21 CFR 606.170 - Adverse reaction file.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 7 2014-04-01 2014-04-01 false Adverse reaction file. 606.170 Section 606.170... Adverse reaction file. (a) Records shall be maintained of any reports of complaints of adverse reactions... thorough investigation of each reported adverse reaction shall be made. A written report of...

  11. 21 CFR 606.170 - Adverse reaction file.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Adverse reaction file. 606.170 Section 606.170... Adverse reaction file. (a) Records shall be maintained of any reports of complaints of adverse reactions... thorough investigation of each reported adverse reaction shall be made. A written report of...

  12. Remote-Handled Transuranic Content Codes

    SciTech Connect

    Washington TRU Solutions

    2006-12-01

    The Remote-Handled Transuranic (RH-TRU) Content Codes (RH-TRUCON) document describes the inventory of RH-TRU waste within the transportation parameters specified by the Remote-Handled Transuranic Waste Authorized Methods for Payload Control (RH-TRAMPAC).1 The RH-TRAMPAC defines the allowable payload for the RH-TRU 72-B. This document is a catalog of RH-TRU 72-B authorized contents by site. A content code is defined by the following components: • A two-letter site abbreviation that designates the physical location of the generated/stored waste (e.g., ID for Idaho National Laboratory [INL]). The site-specific letter designations for each of the sites are provided in Table 1. • A three-digit code that designates the physical and chemical form of the waste (e.g., content code 317 denotes TRU Metal Waste). For RH-TRU waste to be transported in the RH-TRU 72-B, the first number of this three-digit code is “3.” The second and third numbers of the three-digit code describe the physical and chemical form of the waste. Table 2 provides a brief description of each generic code. Content codes are further defined as subcodes by an alpha trailer after the three-digit code to allow segregation of wastes that differ in one or more parameter(s). For example, the alpha trailers of the subcodes ID 322A and ID 322B may be used to differentiate between waste packaging configurations. As detailed in the RH-TRAMPAC, compliance with flammable gas limits may be demonstrated through the evaluation of compliance with either a decay heat limit or flammable gas generation rate (FGGR) limit per container specified in approved content codes. As applicable, if a container meets the watt*year criteria specified by the RH-TRAMPAC, the decay heat limits based on the dose-dependent G value may be used as specified in an approved content code. If a site implements the administrative controls outlined in the RH-TRAMPAC and Appendix 2.4 of the RH-TRU Payload Appendices, the decay heat or FGGR

  13. The prevention and handling of the missing data.

    PubMed

    Kang, Hyun

    2013-05-01

    Even in a well-designed and controlled study, missing data occurs in almost all research. Missing data can reduce the statistical power of a study and can produce biased estimates, leading to invalid conclusions. This manuscript reviews the problems and types of missing data, along with the techniques for handling missing data. The mechanisms by which missing data occurs are illustrated, and the methods for handling the missing data are discussed. The paper concludes with recommendations for the handling of missing data.

  14. Building a framework for ergonomic research on laparoscopic instrument handles.

    PubMed

    Li, Zheng; Wang, Guohui; Tan, Juan; Sun, Xulong; Lin, Hao; Zhu, Shaihong

    2016-06-01

    Laparoscopic surgery carries the advantage of minimal invasiveness, but ergonomic design of the instruments used has progressed slowly. Previous studies have demonstrated that the handle of laparoscopic instruments is vital for both surgical performance and surgeon's health. This review provides an overview of the sub-discipline of handle ergonomics, including an evaluation framework, objective and subjective assessment systems, data collection and statistical analyses. Furthermore, a framework for ergonomic research on laparoscopic instrument handles is proposed to standardize work on instrument design.

  15. Recurrent adverse pregnancy outcome and antiphospholipid antibodies.

    PubMed

    Reece, E A; Gabrielli, S; Cullen, M T; Zheng, X Z; Hobbins, J C; Harris, E N

    1990-07-01

    Antiphospholipid antibodies, which include lupus-like anticoagulant and anticardiolipin antibody, have been linked to a number of adverse pregnancy outcomes, although their exact pathogenic mechanisms remain poorly defined. The relative risk of complications such as intrauterine growth retardation, spontaneous abortions, and stillbirth in patients with antiphospholipid antibodies also remains undetermined. Heightened attention has been focused on the association, leading to investigations into the pathogenesis. Uncontrolled studies have also explored therapeutic regimens such as aspirin, steroids, and heparin, and clinical trials have used various treatment protocols. Although knowledge into the association of antiphospholipid antibodies and recurrent adverse pregnancy outcome is limited and continues to evolve, this association provides new insights into the disease and offers promise for pharmacologic prophylaxis. In this article, current concepts on pathogenesis, diagnosis, and therapy are reviewed and recommendations are made for clinical care of these patients.

  16. An Ss Model with Adverse Selection.

    ERIC Educational Resources Information Center

    House, Christopher L.; Leahy, John V.

    2004-01-01

    We present a model of the market for a used durable in which agents face fixed costs of adjustment, the magnitude of which depends on the degree of adverse selection in the secondary market. We find that, unlike typical models, the sS bands in our model contract as the variance of the shock increases. We also analyze a dynamic version of the model…

  17. Childhood Adversities and Adult Cardiometabolic Health: Does the Quantity, Timing, and Type of Adversity Matter?

    PubMed Central

    Friedman, Esther M.; Montez, Jennifer Karas; Sheehan, Connor McDevitt; Guenewald, Tara L.; Seeman, Teresa E.

    2015-01-01

    Objective Adverse events in childhood can indelibly influence adult health. While evidence for this association has mounted, a fundamental set of questions about how to operationalize adverse events has been understudied. Method We used data from the National Survey of Midlife Development in the United States to examine how quantity, timing, and types of adverse events in childhood are associated with adult cardiometabolic health. Results The best-fitting specification of quantity of events was a linear measure reflecting a dose–response relationship. Timing of event mattered less than repeated exposure to events. Regarding the type of event, academic interruptions and sexual/physical abuse were most important. Adverse childhood events elevated the risk of diabetes and obesity similarly for men and women but had a greater impact on women’s risk of heart disease. Discussion Findings demonstrate the insights that can be gleaned about the early-life origins of adult health by examining operationalization of childhood exposures. PMID:25903978

  18. 7 CFR 929.60 - Handling for special purposes.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE CRANBERRIES GROWN IN STATES OF... terminated to facilitate handling of excess cranberries for the following purposes: (a)...

  19. 7 CFR 929.60 - Handling for special purposes.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE CRANBERRIES GROWN IN STATES OF... terminated to facilitate handling of excess cranberries for the following purposes: (a)...

  20. 7 CFR 929.60 - Handling for special purposes.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE CRANBERRIES GROWN IN STATES OF... terminated to facilitate handling of excess cranberries for the following purposes: (a)...

  1. ISS Update: Station Command and Data Handling System

    NASA Video Gallery

    NASA Public Affairs Officer Kylie Clem interviews ODIN flight controller Amy Brezinski, who monitors and commands the Command and Data Handling System for the International Space Station. Brezinski...

  2. Cooper-Harper Experience Report for Spacecraft Handling Qualities Applications

    NASA Technical Reports Server (NTRS)

    Bailey, Randall E.; Jackson, E. Bruce; Bilimoria, Karl D.; Mueller, Eric R.; Frost, Chad R.; Alderete, Thomas S.

    2009-01-01

    A synopsis of experience from the fixed-wing and rotary-wing aircraft communities in handling qualities development and the use of the Cooper-Harper pilot rating scale is presented as background for spacecraft handling qualities research, development, test, and evaluation (RDT&E). In addition, handling qualities experiences and lessons-learned from previous United States (US) spacecraft developments are reviewed. This report is intended to provide a central location for references, best practices, and lessons-learned to guide current and future spacecraft handling qualities RDT&E.

  3. Adverse Outcome Pathway (AOP) Network Development for ...

    EPA Pesticide Factsheets

    Adverse outcome pathways (AOPs) are descriptive biological sequences that start from a molecular initiating event (MIE) and end with an adverse health outcome. AOPs provide biological context for high throughput chemical testing and further prioritize environmental health risk research. According to the Organization for Economic Co-operation and Development guidelines, AOPs are pathways with one MIE anchored to an adverse outcome (AO) by key events (KEs) and key event relationships (KERs). However, this approach does not always capture the cumulative impacts of multiple MIEs on the AO. For example, hepatic lipid flux due to chemical-induced toxicity initiates from multiple ligand-activated receptors and signaling pathways that cascade across biology to converge upon a common fatty liver (FL, also known as steatosis) outcome. To capture this complexity, a top-down strategy was used to develop a FL AOP network (AOPnet). Literature was queried based on the terms steatosis, fatty liver, cirrhosis, and hepatocellular carcinoma. Search results were analyzed for physiological and pathophysiological organ level, cellular and molecular processes, as well as pathway intermediates, to identify potential KEs and MIEs that are key for hepatic lipid metabolism, maintenance, and dysregulation. The analysis identified four apical KE nodes (hepatic fatty acid uptake, de novo fatty acid and lipid synthesis, fatty acid oxidation, and lipid efflux) juxtaposed to the FL AO. The apic

  4. Serious Adverse Events After Cataract Surgery

    PubMed Central

    Stein, Joshua D.

    2013-01-01

    Purpose Over the past several decades there have been many advances in the equipment, instrumentation and techniques of performing cataract surgery. This review will address the impact of these advances on the safety profile of cataract surgery. Recent Findings Recent studies have demonstrated a decline in the risk of serious postoperative adverse events (endophthalmitis, suprachoroidal hemorrhage, retinal detachment) following cataract surgery. Factors that increase the risk of serious complications from cataract surgery include patient-related factors (male sex, concomitant diabetic retinopathy, same day cataract surgery combined with another intraocular surgery, tamsulosin use) and surgeon-related factors (low surgical volume, limited experience, operating on patients who are most prone to adverse events). Summary Cataract surgery continues to be a very safe surgical procedure with few patients experiencing serious sight-threatening adverse events. Studies in the literature have helped surgeons identify patients who are at high risk for surgical complications and to develop strategies to limit surgical complications when operating on these patients. As multifocal intraocular lenses, femtosecond laser technology, and other surgical innovations continue to gain popularity, it will be interesting in the coming years to determine whether there will be a continued reduction in complications of cataract surgery. PMID:22450221

  5. Statin-Associated Muscle Adverse Events

    PubMed Central

    Al-Mohaissen, Maha A.; Ignaszewski, Martha J.; Frohlich, Jiri; Ignaszewski, Andrew P.

    2016-01-01

    Statins are potent medications which reduce low-density lipoprotein cholesterol (LDL-C) levels. Their efficacy in cardiovascular risk reduction is well established and indications for their use are expanding. While statins are generally well tolerated and safe, adverse events are relatively common, particularly statin-associated muscle adverse events (SaMAEs), which are the most frequently encountered type of adverse event. Recent guidelines and guideline updates on SaMAEs and statin intolerance have included revised definitions of SaMAEs, incorporating new evidence on their pathogenesis and management. As SaMAEs emerge as a therapeutic challenge, it is important for physicians to be aware of updates on management strategies to ensure better patient outcomes. The majority of patients who are considered statin-intolerant can nevertheless tolerate some forms of statin therapy and successfully achieve optimal LDL-C levels. This review article discusses the recent classification of SaMAEs with emphasis on pathogenesis and management strategies. PMID:28003885

  6. Neuropsychiatric Adverse Effects of Amphetamine and Methamphetamine.

    PubMed

    Harro, Jaanus

    2015-01-01

    Administration of amphetamine and methamphetamine can elicit psychiatric adverse effects at acute administration, binge use, withdrawal, and chronic use. Most troublesome of these are psychotic states and aggressive behavior, but a large variety of undesirable changes in cognition and affect can be induced. Adverse effects occur more frequently with higher dosages and long-term use. They can subside over time but some persist long-term. Multiple alterations in the gray and white matter of the brain assessed as changes in tissue volume or metabolism, or at molecular level, have been associated with amphetamine and methamphetamine use and the psychiatric adverse effects, but further studies are required to clarify their causal role, specificity, and relationship with preceding states and traits and comorbidities. The latter include other substance use disorders, mood and anxiety disorders, attention deficit hyperactivity disorder, and antisocial personality disorder. Amphetamine- and methamphetamine-related psychosis is similar to schizophrenia in terms of symptomatology and pathogenesis, and these two disorders share predisposing genetic factors.

  7. Combating adverse selection in secondary PC markets.

    PubMed

    Hickey, Stewart W; Fitzpatrick, Colin

    2008-04-15

    Adverse selection is a significant contributor to market failure in secondary personal computer (PC) markets. Signaling can act as a potential solution to adverse selection and facilitate superior remarketing of second-hand PCs. Signaling is a means whereby usage information can be utilized to enhance consumer perception of both value and utility of used PCs and, therefore, promote lifetime extension for these systems. This can help mitigate a large portion of the environmental impact associated with PC system manufacture. In this paper, the computer buying and selling behavior of consumers is characterized via a survey of 270 Irish residential users. Results confirm the existence of adverse selection in the Irish market with 76% of potential buyers being unwilling to purchase and 45% of potential vendors being unwilling to sell a used PC. The so-called "closet affect" is also apparent with 78% of users storing their PC after use has ceased. Results also indicate that consumers place a higher emphasis on specifications when considering a second-hand purchase. This contradicts their application needs which are predominantly Internet and word-processing/spreadsheet/presentation applications, 88% and 60% respectively. Finally, a market solution utilizing self monitoring and reporting technology (SMART) sensors for the purpose of real time usage monitoring is proposed, that can change consumer attitudes with regard to second-hand computer equipment.

  8. Orion Capsule Handling Qualities for Atmospheric Entry

    NASA Technical Reports Server (NTRS)

    Tigges, Michael A.; Bihari, Brian D.; Stephens, John-Paul; Vos, Gordon A.; Bilimoria, Karl D.; Mueller, Eric R.; Law, Howard G.; Johnson, Wyatt; Bailey, Randall E.; Jackson, Bruce

    2011-01-01

    Two piloted simulations were conducted at NASA's Johnson Space Center using the Cooper-Harper scale to study the handling qualities of the Orion Command Module capsule during atmospheric entry flight. The simulations were conducted using high fidelity 6-DOF simulators for Lunar Return Skip Entry and International Space Station Return Direct Entry flight using bank angle steering commands generated by either the Primary (PredGuid) or Backup (PLM) guidance algorithms. For both evaluations, manual control of bank angle began after descending through Entry Interface into the atmosphere until drogue chutes deployment. Pilots were able to use defined bank management and reversal criteria to accurately track the bank angle commands, and stay within flight performance metrics of landing accuracy, g-loads, and propellant consumption, suggesting that the pilotability of Orion under manual control is both achievable and provides adequate trajectory performance with acceptable levels of pilot effort. Another significant result of these analyses is the applicability of flying a complex entry task under high speed entry flight conditions relevant to the next generation Multi Purpose Crew Vehicle return from Mars and Near Earth Objects.

  9. Genotoxic Monitoring of Nurses Handling Cytotoxic Drugs

    PubMed Central

    Tompa, Anna; Biró, Anna; Jakab, Mátyás

    2016-01-01

    Objective: Several biomarkers may be used to detect harmful exposure and individual susceptibility to cancer. Monitoring of biomarkers related to exposure may have a significant effect on early detection of cell transformation, thereby aiding the primary prevention of various chronic and malignant diseases. Nurses who handle cytotoxic drugs are exposed to carcinogenic agents, which have the potential to interrupt the cell cycle and to induce chromosomal aberrations. The presence of high chromosomal aberrations indicates the need for intervention even when exposure to these carcinogens is low. Methods: Nationally representative samples of 552 nurses were investigated by a follow-up monitoring system. The measured biomarkers were clinical laboratory routine tests, completed with genotoxicological (chromosome aberrations [CAs] and sister chromatid exchanges [SCEs]) and immunotoxicological monitoring (ratio of lymphocyte subpopulations and lymphocyte activation markers) measured on peripheral blood lymphocytes. Results were compared to the data of 140 healthy, age-matched controls. Results: In nurses exposed to cytostatics, we observed a significantly increased frequency of CAs and SCEs compared with those in the controls. Cytostatic drug exposure also manifested itself in an increased frequency of helper T lymphocytes. Genotoxicological and immunotoxicological changes, as well as negative health effects (i.e., iron deficiency, anemia, and thyroid diseases), increased among cytostatic exposed subjects. Conclusions: These results raised concerns about the protection of nursing staff from chemical carcinogens in the working environment. PMID:28083554

  10. Pre-slaughter handling and pork quality.

    PubMed

    Vermeulen, L; Van de Perre, V; Permentier, L; De Bie, S; Verbeke, G; Geers, R

    2015-02-01

    Environmental variables, as sound levels, were collected during the pre-slaughter process in 18 different Belgian commercial slaughterhouses. Four pre-slaughter phases were determined: firstly after arrival of the truck at the slaughterhouse and just before unloading, secondly during unloading, thirdly at lairage and finally while moving to the stunner. A total of 8508 pigs was examined during the pre-slaughter process, of which the pH(LT) (M. longissimus thoracis), at 30 min post-mortem was measured. For each pre-slaughter phase, variables which might influence pork quality were determined. Moreover, this study made it possible to infer a checklist to represent and predict PSE traits of pork for all kind of pre-slaughter situations. The checklist shows also that the impact on pork quality is more decisive for the variables measured close to the stunning phase. Hence, this information is useful for the industry to optimize handling of pigs, reducing the risk for PSE traits.

  11. Mold contamination and air handling units.

    PubMed

    Wilson, Stephen C; Palmatier, Robert N; Andriychuk, Larysa A; Martin, Jared M; Jumper, Cynthia A; Holder, Homer W; Straus, David C

    2007-07-01

    An investigation was conducted on selected locations in air handling units (AHUs) to (a) identify common mold species found on these locations, (b) determine whether some locations (and subsets) featured mold growth sites more frequently than others, (c) ascertain whether the operating condition of AHUs is related to mold contamination, and (d) provide a basis for a microbial sampling protocol for AHUs. A total of 566 tape lifts and 570 swab samples were collected from the blower wheel fan blades, insulation, cooling coil fins, and ductwork from 25 AHUs. All AHU conditions were numerically rated using a heating, ventilation and air-conditioning (HVAC) survey. Results showed that Cladosporium sp. fungi were commonly recovered in terms of growth sites and deposited spores, and they were found mainly in the blower wheel fan blades, the ductwork, and the cooling coil fins. Subsections of the fan blades, insulation, and cooling coil fins showed no preferred area for mold growth sites. Other organisms such as Penicillium sp., Aspergillus sp., and Paecilomyces sp. were recovered from the cooling coil fins and insulation. Because of the widespread prevalence of Cladosporium sp., there was no relationship between mold growth and operating condition. However, the presence of different species of molds in locations other than the blower wheel blades may indicate that the AHU condition is not optimal. A suggested microbial sampling protocol including interpretations of sample results is presented.

  12. Mars Sample Handling and Requirements Panel (MSHARP)

    NASA Technical Reports Server (NTRS)

    Carr, Michael H.; McCleese, Daniel J.; Bada, Jeffrey L.; Bogard, Donald D.; Clark, Benton C.; DeVincenzi, Donald; Drake, Michael J.; Nealson, Kenneth H.; Papike, James J.; Race, Margaret S.; Stahl, David

    1999-01-01

    In anticipation of the return of samples from Mars toward the end of the first decade of the next century, NASA's Office of Space Sciences chartered a panel to examine how Mars samples should be handled. The panel was to make recommendations in three areas: (1) sample collection and transport back to Earth; (2) certification of the samples as nonhazardous; and (3) sample receiving, curation, and distribution. This report summarizes the findings of that panel. The samples should be treated as hazardous until proven otherwise. They are to be sealed within a canister on Mars, and the canister is not to be opened until within a Biosafety Hazard Level 4 (BSL-4) containment facility here on Earth. This facility must also meet or exceed the cleanliness requirements of the Johnson Space Center (JSC) facility for curation of extraterrestrial materials. A containment facility meeting both these requirements does not yet exist. Hazard assessment and life detection experiments are to be done at the containment facility, while geochemical characterization is being performed on a sterilized subset of the samples released to the science community. When and if the samples are proven harmless, they are to be transferred to a curation facility, such as that at JSC.

  13. Bag-out material handling system

    DOEpatents

    Brak, Stephen B.; Milek, Henry F.

    1984-01-01

    A bagging device for transferring material from a first chamber through an pening in a wall to a second chamber includes an outer housing communicating with the opening and having proximal and distal ends relative to the wall. An inner housing having proximal and distal ends corresponding to those of the outer housing is mounted in a concentrically spaced, sealed manner with respect to the distal end of the outer housing. The inner and outer housings and mounting means therebetween define an annular chamber, closed at its distal end and open at its proximal end, in which a pliable tube is slidably positioned in sealed engagement with the housings. The pliable tube includes a sealed end positioned adjacent the proximal end of the inner housing so as to maintain isolation between the first and second chambers. Displacement of the material to be bagged from the first chamber along the inner housing so as to contact the sealed portion of the pliable bag allows the material to be positioned within the pliable bag in the second chamber. The bag is then sealed and severed between where the material is positioned therein and the wall in providing a sealed container for handling the material. The pliable tube when substantially depleted slides onto a narrow portion of the inner housing to allow a new pliable tube to be positioned over the old pliable tube. Remnants of the old pliable tube are then discharged into the new pliable tube with the bagging and removal of additional material.

  14. Bag-out material handling system

    DOEpatents

    Brak, Stephen B.

    1985-01-01

    A bagging device for transferring material from a first chamber through an opening in a wall to a second chamber includes an outer housing communicating with the opening and having proximal and distal ends relative to the wall. An inner housing having proximal and distal ends corresponding to those of the outer housing is mounted in a concentrically spaced, sealed manner with respect to the distal end of the outer housing. The inner and outer housings and mounting means therebetween define an annular chamber, closed at its distal end and open at its proximal end, in which a pliable tube is slidably positioned in sealed engagement with the housings. The pliable tube includes a sealed end positioned adjacent the proximal end of the inner housing so as to maintain isolation between the first and second chambers. Displacement of the material to be bagged from the first chamber along the inner housing so as to contact the sealed portion of the pliable bag allows the material to be positioned within the pliable bag in the second chamber. The bag is then sealed and severed between where the material is positioned therein and the wall in providing a sealed container for handling the material. The pliable tube when substantially depleted slides onto a narrow portion of the inner housing to allow a new pliable tube to be positioned over the old pliable tube. Remnants of the old pliable tube are then discharged into the new pliable tube with the bagging and removal of additional material.

  15. Handling target obscuration through Markov chain observations

    NASA Astrophysics Data System (ADS)

    Kouritzin, Michael A.; Wu, Biao

    2008-04-01

    Target Obscuration, including foliage or building obscuration of ground targets and landscape or horizon obscuration of airborne targets, plagues many real world filtering problems. In particular, ground moving target identification Doppler radar, mounted on a surveillance aircraft or unattended airborne vehicle, is used to detect motion consistent with targets of interest. However, these targets try to obscure themselves (at least partially) by, for example, traveling along the edge of a forest or around buildings. This has the effect of creating random blockages in the Doppler radar image that move dynamically and somewhat randomly through this image. Herein, we address tracking problems with target obscuration by building memory into the observations, eschewing the usual corrupted, distorted partial measurement assumptions of filtering in favor of dynamic Markov chain assumptions. In particular, we assume the observations are a Markov chain whose transition probabilities depend upon the signal. The state of the observation Markov chain attempts to depict the current obscuration and the Markov chain dynamics are used to handle the evolution of the partially obscured radar image. Modifications of the classical filtering equations that allow observation memory (in the form of a Markov chain) are given. We use particle filters to estimate the position of the moving targets. Moreover, positive proof-of-concept simulations are included.

  16. Experiences with decontaminating tritium-handling apparatus

    SciTech Connect

    Maienschein, J.L.; Garcia, F.; Garza, R.G.; Kanna, R.L.; Mayhugh, S.R.; Taylor, D.T.

    1991-07-01

    Tritium-handling apparatus has been decontaminated as part of the shutdown of the LLNL Tritium Facility. Two stainless-steel gloveboxes that had been used to process lithium deuteride-tritide (LiDT) salt were decontaminated using the Portable Cleanup System so that they could be flushed with room air through the facility ventilation system. Further surface decontamination was performed by scrubbing the interior with paper towels and ethyl alcohol or Swish{trademark}. The surface contamination, as shown by swipe surveys, was reduced from 4{times}10{sup 4}--10{sup 6} disintegrations per minute (dpm)/cm{sup 2} to 2{times}10{sup 2}--4{times}10{sup 4} dpm/cm{sup 2}. Details on the decontamination operation are provided. A series of metal (palladium and vanadium) hydride storage beds have been drained of tritium and flushed with deuterium in order to remove as much tritium as possible. The bed draining and flushing procedure is described, and a calculational method is presented which allows estimation of the tritium remaining in a bed after it has been drained and flushed. Data on specific bed draining and flushing are given.

  17. Whole Teflon valves for handling droplets.

    PubMed

    Cybulski, Olgierd; Jakiela, Slawomir; Garstecki, Piotr

    2016-06-21

    We propose and test a new whole-Teflon gate valve for handling droplets. The valve allows droplet plugs to pass through without disturbing them. This is possible due to the geometric design, the choice of material and lack of any pulses of flow generated by closing or opening the valve. The duct through the valve resembles a simple segment of tubing, without constrictions, change in lumen or side pockets. There are no extra sealing materials with different wettability or chemical resistance. The only material exposed to liquids is FEP Teflon, which is resistant to aggressive chemicals and fully biocompatible. The valve can be integrated into microfluidic systems: we demonstrate a complex system for culturing bacteria in hundreds of microliter droplet chemostats. The valve effectively isolates modules of the system to increase precision of operations on droplets. We verified that the valve allowed millions of droplet plugs to safely pass through, without any cross-contamination with bacteria between the droplets. The valve can be used in automating complex microfluidic systems for experiments in biochemistry, biology and organic chemistry.

  18. Electronic astronomical information handling and flexible publishing.

    NASA Astrophysics Data System (ADS)

    Heck, A.

    The current dramatic evolution in information technology is bringing major modifications in the way scientists work and communicate. The concept of electronic information handling encompasses the diverse types of information, the different media, as well as the various communication methodologies and technologies. It ranges from the very collection of data until the final publication of results and sharing of knowledge. New problems and challenges result also from the new information culture, especially on legal, ethical, and educational grounds. Electronic publishing will have to diverge from an electronic version of contributions on paper and will be part of a more general flexible-publishing policy. The benefits of private publishing are questioned. The procedures for validating published material and for evaluating scientific activities will have to be adjusted too. Provision of electronic refereed information independently from commercial publishers in now feasible. Scientists and scientific institutions have now the possibility to run an efficient information server with validated (refereed) material without the help of a commercial publishers.

  19. The Safety Aspects of Handling Primary Explosives

    NASA Astrophysics Data System (ADS)

    Mehta, Neha; Oyler, Karl; Cheng, Gartung

    2013-06-01

    Primary Explosives, unlike secondary explosives, show a very rapid transition from deflagration to detonation and are considerably sensitive to small stimuli, such as impact,friction, electrostatic discharge, and heat. Primary explosives generate either a large amount of heat or a shockwave which makes the transfer of the detonation to a less sensitive propellant or secondary explosive possible. Primary explosives are key components in detonators and primers, which are the initiating elements to many military items such as small, medium and large caliber munitions, mortars, artilleries, warheads, etc. The two most common military primary explosives are lead azide and lead styphnate. Lead based compounds such as these are well-established hazards to health and the environment. To overcome these concerns, we are seeking to replace lead azide in common U.S. Army detonators and primers with DBX-1. Further, in order to minimize the dangers to personnel and equipment associated with synthesizing and handling primary explosives, we have developed a dedicated, remote-operated facility for the synthesis and testing of primary explosives. This paper will present the characterization capabilities and testing methods of primary explosives safe, along with the automation process developed.

  20. Finding Mount Everest and handling voids.

    PubMed

    Storch, Tobias

    2011-01-01

    Evolutionary algorithms (EAs) are randomized search heuristics that solve problems successfully in many cases. Their behavior is often described in terms of strategies to find a high location on Earth's surface. Unfortunately, many digital elevation models describing it contain void elements. These are elements not assigned an elevation. Therefore, we design and analyze simple EAs with different strategies to handle such partially defined functions. They are experimentally investigated on a dataset describing the elevation of Earth's surface. The largest value found by an EA within a certain runtime is measured, and the median over a few runs is computed and compared for the different EAs. For the dataset, the distribution of void elements seems to be neither random nor adversarial. They are so-called semirandomly distributed. To deepen our understanding of the behavior of the different EAs, they are theoretically considered on well-known pseudo-Boolean functions transferred to partially defined ones. These modifications are also performed in a semirandom way. The typical runtime until an optimum is found by an EA is analyzed, namely bounded from above and below, and compared for the different EAs. We figure out that for the random model it is a good strategy to assume that a void element has a worse function value than all previous elements. Whereas for the adversary model it is a good strategy to assume that a void element has the best function value of all previous elements.