Science.gov

Sample records for aec manual chapter

  1. 14 CFR 36.105 - Flight Manual Statement of Chapter 4 equivalency.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Flight Manual Statement of Chapter 4... Airplanes and Jet Airplanes § 36.105 Flight Manual Statement of Chapter 4 equivalency. For each airplane... by the FAA to be equivalent to the Chapter 4 noise level required by the International Civil...

  2. 14 CFR 36.105 - Flight Manual Statement of Chapter 4 equivalency.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Flight Manual Statement of Chapter 4... Airplanes and Jet Airplanes § 36.105 Flight Manual Statement of Chapter 4 equivalency. For each airplane that meets the requirements for Stage 4 certification, the Airplane Flight Manual or operations...

  3. 78 FR 48696 - Draft Revisions to the Marine Safety Manual, Volume III, Chapters 20-26

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-09

    ... SECURITY Coast Guard Draft Revisions to the Marine Safety Manual, Volume III, Chapters 20-26 AGENCY: Coast... discusses the substantive changes to chapters 20 through 26 of MSM Volume III. The Coast Guard seeks and... Notice and Draft of MSM Volume III, Chapters 20-26: To view this Commandant Change notice and Draft...

  4. 14 CFR 36.105 - Flight Manual Statement of Chapter 4 equivalency.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... equivalency. 36.105 Section 36.105 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT NOISE STANDARDS: AIRCRAFT TYPE AND AIRWORTHINESS CERTIFICATION Transport Category Large Airplanes and Jet Airplanes § 36.105 Flight Manual Statement of Chapter 4 equivalency. For each...

  5. Self-Study Manual on Optical Radiation Measurements: Part I--Concepts, Chapters 1 to 3. NBS Technical Note 910-1.

    ERIC Educational Resources Information Center

    Nicodemus, Fred E., Ed.

    This is the initial publication of a series of self-study manuals on optical radiation measurement, and contains the first three chapters. Additional chapters will be published when completed. These chapters include: an introduction to optical radiation and the ray approach to its treatment; an introduction to the basic radiometric quantity…

  6. Aviation Electrician's Mate 1 & C. Rate Training Manual and Nonresident Career Course.

    ERIC Educational Resources Information Center

    Naval Education and Training Command, Pensacola, FL.

    One of a series of training manuals prepared for enlisted personnel in the Navy and Naval Reserve who are studying for advancement in the Aviation Electrician's Mate (AE) rating, this text is based upon the Navy's professional occupational standards for AEI and AEC. Contents include a 10-chapter text followed by a subject index and the associated…

  7. 41 CFR 50-204.34 - AEC licensees-AEC contractors operating AEC plants and facilities-AEC agreement State licensees...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Radiation Standards § 50-204.34 AEC licensees—AEC contractors operating AEC plants and facilities—AEC... license issued by the Atomic Energy Commission and in accordance with the requirements of 10 CFR Part 20... uses source material, byproduct material, special nuclear material, or other radiation sources under...

  8. 41 CFR 50-204.34 - AEC licensees-AEC contractors operating AEC plants and facilities-AEC agreement State licensees...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Radiation Standards § 50-204.34 AEC licensees—AEC contractors operating AEC plants and facilities—AEC... license issued by the Atomic Energy Commission and in accordance with the requirements of 10 CFR Part 20... uses source material, byproduct material, special nuclear material, or other radiation sources under...

  9. 41 CFR 50-204.34 - AEC licensees-AEC contractors operating AEC plants and facilities-AEC agreement State licensees...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Radiation Standards § 50-204.34 AEC licensees—AEC contractors operating AEC plants and facilities—AEC... license issued by the Atomic Energy Commission and in accordance with the requirements of 10 CFR Part 20... uses source material, byproduct material, special nuclear material, or other radiation sources under...

  10. Packaging and transportation manual. Chapter on the packaging and transportation of hazardous and radioactive waste

    SciTech Connect

    1998-03-01

    The purpose of this chapter is to outline the requirements that Los Alamos National Laboratory employees and contractors must follow when they package and ship hazardous and radioactive waste. This chapter is applied to on-site, intra-Laboratory, and off-site transportation of hazardous and radioactive waste. The chapter contains sections on definitions, responsibilities, written procedures, authorized packaging, quality assurance, documentation for waste shipments, loading and tiedown of waste shipments, on-site routing, packaging and transportation assessment and oversight program, nonconformance reporting, training of personnel, emergency response information, and incident and occurrence reporting. Appendices provide additional detail, references, and guidance on packaging for hazardous and radioactive waste, and guidance for the on-site transport of these wastes.

  11. AEC to Referee, Not Promote, Industry.

    PubMed

    1971-10-29

    A major turnabout in the attitude of the Atomic Energy Commission toward the nuclear power industry was signaled last week by the ntew AEC chairman James R. Schlesinger. With patrician froideur, Schlesinger informed a mass gathering of the nuclear power industry at Bal Harbour, Florida, that from henceforth the AEC woLuld act as the referee of nuclear power, not its promoter. Saying he would dispense with the "anecdotes and clumsy jests" customary on such occasions, Schlesinger served notice on the nuclear banqueters that their cozy relationship with the AEC was at an end. The industry should not expect the AEC to fight its battles: it should take its own case to the public-as the Sierra Club does. Nor did the AEC intend to bend the rules in industry's favor. "We have had a fair amount of advice on how to evade the clear mandate of the federal courts. It is advice we did not think proper to accept," Schlesinger said. Even on matters of engineering quality, the diners were told they knew full well they had "reason to blush." Roused out of any postprandial euphoria by this glacial disdain, the industry representatives heard the new chairman announce the following radical upheavals in official AEC philosophy.

  12. 41 CFR 50-204.34 - AEC licensees-AEC contractors operating AEC plants and facilities-AEC agreement State licensees...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... material, or special nuclear material, as defined in the Atomic Energy Act of 1954, as amended, under a license issued by the Atomic Energy Commission and in accordance with the requirements of 10 CFR part 20... contract with the Atomic Energy Commission for the operation of AEC plants and facilities and in...

  13. Metabolic engineering of E.coli for the production of a precursor to artemisinin, an anti-malarial drug [Chapter 25 in Manual of Industrial Microbiology and Biotechnology, 3rd edition

    SciTech Connect

    Petzold, Christopher; Keasling, Jay

    2011-07-18

    This document is Chapter 25 in the Manual of Industrial Microbiology and Biotechnology, 3rd edition. Topics covered include: Incorporation of Amorpha-4,11-Diene Biosynthetic Pathway into E. coli; Amorpha-4,11-Diene Pathway Optimization; "-Omics" Analyses for Increased Amorpha-4,11-Diene Production; Biosynthetic Oxidation of Amorpha-4,11-Diene.

  14. Quality Manual

    NASA Astrophysics Data System (ADS)

    Koch, Michael

    The quality manual is the “heart” of every management system related to quality. Quality assurance in analytical laboratories is most frequently linked with ISO/IEC 17025, which lists the standard requirements for a quality manual. In this chapter examples are used to demonstrate, how these requirements can be met. But, certainly, there are many other ways to do this.

  15. Boating Safety Training Manual.

    ERIC Educational Resources Information Center

    Coast Guard, Washington, DC.

    The training manual serves as the text for the Coast Guard's boating safety 32-hour course and for the D-8 Qualification Code Recertification Course. The manual is designed for self-study or for use with an instructor-led course. Each chapter concludes with a quiz to be used as a review of chaper content. Opening chapters review the use of the…

  16. Chapter A7. Biological Indicators

    USGS Publications Warehouse

    Myers, Donna N.; Wilde, Franceska D.

    2003-01-01

    The National Field Manual for the Collection of Water-Quality Data (National Field Manual) provides guidelines and standard procedures for U.S. Geological Survey (USGS) personnel who collect data used to assess the quality of the Nation's surface-water and ground-water resources. This chapter of the manual includes procedures for the (1) determination of biochemical oxygen demand using a 5-day bioassay test; (2) collection, identification, and enumeration of fecal indicator bacteria; (3) collection of samples and information on two laboratory methods for fecal indicator viruses (coliphages); and (4) collection of samples for protozoan pathogens. Each chapter of the National Field Manual is published separately and revised periodically. Newly published and revised chapters are posted on the World Wide Web on the USGS page 'National Field Manual for the Collection of Water-Quality Data.' The URL for this page is http://pubs.water.usgs.gov/twri9A/ (accessed November 25, 2003).

  17. SU-E-I-34: Evaluating Use of AEC to Lower Dose for Lung Cancer Screening CT Protocols

    SciTech Connect

    Arbique, G; Anderson, J; Guild, J; Duan, X; Malguria, N; Omar, H; Brewington, C; Zhang, D

    2015-06-15

    Purpose: The National Lung Screening Trial mandated manual low dose CT technique factors, where up to a doubling of radiation output could be used over a regular to large patient size range. Recent guidance from the AAPM and ACR for lung cancer CT screening recommends radiation output adjustment for patient size either through AEC or a manual technique chart. This study evaluated the use of AEC for output control and dose reduction. Methods: The study was performed on a multidetector helical CT scanner (Aquillion ONE, Toshiba Medical) equipped with iterative reconstruction (ADIR-3D), AEC was adjusted with a standard deviation (SD) image quality noise index. The protocol SD parameter was incrementally increased to reduce patient population dose while image quality was evaluated by radiologist readers scoring the clinical utility of images on a Likert scale. Results: Plots of effective dose vs. body size (water cylinder diameter reported by the scanner) demonstrate monotonic increase in patient dose with increasing patient size. At the initial SD setting of 19 the average CTDIvol for a standard size patient was ∼ 2.0 mGy (1.2 mSv effective dose). This was reduced to ∼1.0 mGy (0.5 mSv) at an SD of 25 with no noticeable reduction in clinical utility of images as demonstrated by Likert scoring. Plots of effective patient diameter and BMI vs body size indicate that these metrics could also be used for manual technique charts. Conclusion: AEC offered consistent and reliable control of radiation output in this study. Dose for a standard size patient was reduced to one-third of the 3 mGy CTDIvol limit required for ACR accreditation of lung cancer CT screening. Gary Arbique: Research Grant, Toshiba America Medical Systems; Cecelia Brewington: Research Grant, Toshiba America Medical Systems; Di Zhang: Employee, Toshiba America Medical Systems.

  18. Peace Corps Aquaculture Training Manual. Training Manual T0057.

    ERIC Educational Resources Information Center

    Peace Corps, Washington, DC. Information Collection and Exchange Div.

    This Peace Corps training manual was developed from two existing manuals to provide a comprehensive training program in fish production for Peace Corps volunteers. The manual encompasses the essential elements of the University of Oklahoma program that has been training volunteers in aquaculture for 25 years. The 22 chapters of the manual are…

  19. Biosafety Manual

    SciTech Connect

    King, Bruce W.

    2010-05-18

    Work with or potential exposure to biological materials in the course of performing research or other work activities at Lawrence Berkeley National Laboratory (LBNL) must be conducted in a safe, ethical, environmentally sound, and compliant manner. Work must be conducted in accordance with established biosafety standards, the principles and functions of Integrated Safety Management (ISM), this Biosafety Manual, Chapter 26 (Biosafety) of the Health and Safety Manual (PUB-3000), and applicable standards and LBNL policies. The purpose of the Biosafety Program is to protect workers, the public, agriculture, and the environment from exposure to biological agents or materials that may cause disease or other detrimental effects in humans, animals, or plants. This manual provides workers; line management; Environment, Health, and Safety (EH&S) Division staff; Institutional Biosafety Committee (IBC) members; and others with a comprehensive overview of biosafety principles, requirements from biosafety standards, and measures needed to control biological risks in work activities and facilities at LBNL.

  20. Police Robbery Control Manual.

    ERIC Educational Resources Information Center

    Ward, Richard H.; And Others

    The manual was designed as a practical guide for police department personnel in developing robbery control programs. An introductory chapter defines types of robberies and suggests administrative and operational uses of the manual. Research and control strategies are reported according to five robbery types: street (visible and non-visible),…

  1. SU-E-I-48: The Behavior of AEC in Scan Regions Outside the Localizer Radiograph FOV: An In Phantom Study of CT Systems From Four Vendors

    SciTech Connect

    Supanich, M; Bevins, N

    2014-06-01

    Purpose: This review of scanners from 4 major manufacturers examines the clinical impact of performing CT scans that extend into areas of the body that were not acquired in the CT localizer radiograph. Methods: Anthropomorphic chest and abdomen phantoms were positioned together on the tables of CT scanners from 4 different vendors. All of the scanners offered an Automatic Exposure Control (AEC) option with both lateral and axial tube current modulation. A localizer radiograph was taken covering the entire extent of both phantoms and then the scanner's Chest-Abdomen-Pelvis (CAP) study was performed with the clinical AEC settings employed and the scan and reconstruction range extending from the superior portion of the chest phantom through the inferior portion of the abdomen phantom. A new study was then initiated with a localizer radiograph extending the length of the chest phantom (not covering the abdomen phantom). The same CAP protocol and AEC settings were then used to scan and reconstruct the entire length of both phantoms. Scan parameters at specific locations in the abdomen phantom from both studies were investigated using the information contained in the DICOM metadata of the reconstructed images. Results: The AEC systems on all scanners utilized different tube current settings in the abdomen phantom for the scan completed without the full localizer radiograph. The AEC system behavior was also scanner dependent with the default manual tube current, the maximum tube current and the tube current at the last known position observed as outcomes. Conclusion: The behavior of the AEC systems of CT scanners in regions not covered by the localizer radiograph is vendor dependent. To ensure optimal image quality and radiation exposure it is important to include the entire planned scan region in the localizer radiograph.

  2. Basic Data Report for Monitor Well AEC-7 Reconfiguration

    SciTech Connect

    Washington Regulatory and Environmental Services

    2005-01-20

    The New Mexico Office of the State Engineer (OSE) permitted well AEC-7 as C-2742. This well has been part of the far-field monitoring network since 1974. The well was used to obtain water level elevations and hydraulic parameters from both the Bell Canyon Formation and the Culebra Member of the Rustler Formation. This basic data report provides a historical account of the well from the original installation to the current configuration.

  3. Education and Human Resources Sector Assessment Manual.

    ERIC Educational Resources Information Center

    Pigozzi, Mary Joy; Cieutat, Victor J.

    This manual endorses and adopts the sector-assessment approach for planning and managing the allocation of educational resources. Chapter 1 presents the manual's goals. Chapter 2 describes the manual's content and information sources, explains the term "sector assessment," identifies the groups that benefit from recommendations made by the…

  4. Almond Production Manual Chapter: Insects and Mites

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The navel orangeworm, Amyelois transitella (Walker), is the most important insect pest of almond in California and can cost as much as $500 dollars per acre to control when the costs of insecticides and sanitation are included. It is a native of the southwestern United States and Mexico and was firs...

  5. Chapter A3. Cleaning of Equipment for Water Sampling

    USGS Publications Warehouse

    Wilde, Franceska D.; Radtke, Dean B.; Gibs, Jacob; Iwatsubo, Rick T.

    1998-01-01

    The National Field Manual for the Collection of Water-Quality Data (National Field Manual) describes protocols and provides guidelines for U.S. Geological Survey (USGS) personnel who collect data used to assess the quality of the Nation's surface-water and ground-water resources. Chapter A3 describes procedures for cleaning the equipment used to collect and process samples of surface water and ground water and procedures for assessing the efficacy of the equipment-cleaning process. This chapter is designed for use with the other chapters of this field manual. Each chapter of the National Field Manual is published separately and revised periodically. Newly published and revised chapters will be posted on the USGS page 'National Field Manual for the Collection of Water-Quality Data.' The URL for this page is http://pubs.water.usgs.gov/twri9A/ (accessed September 20, 2004).

  6. AEC Lowman Station FGD conversion from limestone to magnesium-enhanced lime scrubbing

    SciTech Connect

    Inkenhaus, W.; Babu, M.; Smith, K.; Loper, L.

    1996-12-31

    AEC`s Lowman Station is located in Leroy, Alabama. Units 2 and 3, with a total of 516 MW output capacity, were switched from the limestone FGD operation in January of 1996. Prior to switching, personnel from AEC and Dravo Lime Company conducted a four week test on magnesium-enhanced lime and obtained scrubber performance data including SO{sub 2} removal efficiencies on the modulus while burning higher sulfur coal. It was determined that the plant could take advantage of the higher SO{sub 2} removal efficiency of the magnesium-enhanced lime system. Major benefits resulting from this conversion were AEC`s ability to switch to a lower cost high sulfur coal while meeting the stringent SO{sub 2} emission requirements. Power cost savings resulted from the lower liquid to gas ratio required by the magnesium-enhanced lime process. Three recirculation pumps per module were reduced to a single operating pump per module, lowering the scrubber pressure drop. Significant cost reduction in the operating costs of the ball mill was realized due to modifications made to slake lime instead of grinding limestone. This paper discusses the plant modifications that were needed to make the switch, cost justifications, and AEC`s operating experiences to date. AEC and Dravo Lime Company working together as a team conducted detailed cost studies that followed with extended field tests and implementing plant modifications. This plant continues to operate in the magnesium-enhanced lime FGD mode to date.

  7. Ciencias 2. Manual do Professor (Science Teacher's Manual).

    ERIC Educational Resources Information Center

    Raposo, Lucilia

    This is the teacher's manual for Ciencias 2, the second in a series of elementary science textbooks for Portuguese-speaking students. The student textbook contains 10 chapters and 57 activities. The teacher's manual presents an explanation of the educational goals and the organization of the content, Topics included are environment, the human,…

  8. Hoisting and rigging manual: Uncontrolled document

    SciTech Connect

    1991-05-01

    This document is a draft copy of a Hoisting and Rigging Manual for the Department of Energy. The manual is divided into ten chapters. The chapter titles follow: terminology and definitions; operator training and qualification; overhead and gantry cranes; mobile cranes; forklift trucks; hoists; hooks; wire rope, slings, and rigging accessories; construction hoisting and rigging equipment requirements; references.

  9. Manual of Educational Risk Management.

    ERIC Educational Resources Information Center

    Cody, Frank J.; Dise, John H., Jr.

    This is the first risk management publication for school administrators that attempts to be comprehensive by addressing all potential areas of risk to school districts and offering specific guidelines on how to manage those areas. Chapter 1 gives directions on how to use the manual. Chapter 2 contains a complete overview of risk management,…

  10. Wastewater Treatment I. Instructor's Manual.

    ERIC Educational Resources Information Center

    California Water Pollution Control Association, Sacramento. Joint Education Committee.

    This instructor's manual provides an outline and guide for teaching Wastewater Treatment I. It consists of nine sections. An introductory note and a course outline comprise sections 1 and 2. Section 3 (the bulk of the guide) presents lesson outlines for teaching the ten chapters of the manual entitled "Operation of Wastewater Treatment Plants."…

  11. Student Attendance Accounting Manual.

    ERIC Educational Resources Information Center

    Freitas, Joseph M.

    In response to state legislation authorizing procedures for changes in academic calendars and measurement of student workload in California community colleges, this manual from the Chancellor's Office provides guidelines for student attendance accounting. Chapter 1 explains general items such as the academic calendar, admissions policies, student…

  12. Elementary School Finance Manual.

    ERIC Educational Resources Information Center

    National Catholic Educational Association, Washington, DC.

    Developed to assist those responsible for financial matters in Catholic elementary schools, this manual presents each topic briefly and simply, taking into account administrators' minimal formal financial training. It is divided into six sections. Chapter 1, "Daily Financial Operations," describes the specifics of handling receipts, billings, and…

  13. Rescue Manual. Module 8.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Instructional Materials Lab.

    This learner manual for rescuers covers the current techniques or practices required in the rescue service. The eighth of 10 modules contains 6 chapters: (1) trench rescue; (2) shoring and tunneling techniques; (3) farm accident rescue; (4) wilderness search and rescue; (5) aircraft rescue; and (6) helicopter information. Key points, an…

  14. Rescue Manual. Module 4.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Instructional Materials Lab.

    This learner manual for rescuers covers the current techniques or practices required in the rescue service. The fourth of 10 modules contains 8 chapters: (1) construction and characteristics of rescue rope; (2) knots, bends, and hitches; (3) critical angles; (4) raising systems; (5) rigging; (6) using the brake-bar rack for rope rescue; (7) rope…

  15. The Tree Worker's Manual.

    ERIC Educational Resources Information Center

    Smithyman, S. J.

    This manual is designed to prepare students for entry-level positions as tree care professionals. Addressed in the individual chapters of the guide are the following topics: the tree service industry; clothing, eqiupment, and tools; tree workers; basic tree anatomy; techniques of pruning; procedures for climbing and working in the tree; aerial…

  16. Radiological Defense Manual.

    ERIC Educational Resources Information Center

    Defense Civil Preparedness Agency (DOD), Washington, DC.

    Originally prepared for use as a student textbook in Radiological Defense (RADEF) courses, this manual provides the basic technical information necessary for an understanding of RADEF. It also briefly discusses the need for RADEF planning and expected postattack emergency operations. There are 14 chapters covering these major topics: introduction…

  17. Rescue Manual. Module 6.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Instructional Materials Lab.

    This learner manual for rescuers covers the current techniques or practices required in the rescue service. The sixth of 10 modules contains 4 chapters: (1) industrial rescue; (2) rescue from a confined space; (3) extrication from heavy equipment; and (4) rescue operations involving elevators. Key points, an introduction, and conclusion accompany…

  18. Matematica 3. Manual.

    ERIC Educational Resources Information Center

    D'Alu, Maria Jose Miranda de Sousa

    This teachers manual accompanies a mathematics textbook, written in Portuguese, for third graders. It closely follows the objectives and methodology of the major curricula used throughout the schools in the United States. The 11 chapters deal with: numeration (0-999,999); addition with and without regrouping; subtraction with and without…

  19. Rescue Manual. Module 9.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Instructional Materials Lab.

    This learner manual for rescuers covers the current techniques or practices required in the rescue service. The ninth of 10 modules contains 7 chapters: (1) ice characteristics; (2) river characteristics and tactics for rescue; (3) water rescue techniques; (4) water rescue/recovery operations; (5) dive operations; (6) water rescue equipment; and…

  20. Bridge Inspector's Training Manual.

    ERIC Educational Resources Information Center

    Federal Highway Administration (DOT), Washington, DC. Bureau of Public Roads.

    A guide for the instruction of bridge inspectors is provided in this manual as well as instructions for conducting and reporting on a bridge inspection. The chapters outline the qualifications necessary to become a bridge inspector. The subject areas covered are: The Bridge Inspector, Bridge Structures, Bridge Inspection Reporting System,…

  1. Manual on Bibliographic Control.

    ERIC Educational Resources Information Center

    International Federation of Library Associations, The Hague (Netherlands).

    This manual outlines objectives, functions, and methods for establishing national bibliographic control as part of the development of a worldwide system for the control and exchange of bibliographic information. Chapters cover: (1) definitions of bibliographic control and related concepts including Universal Bibliographic Control (UBC) and…

  2. Program Evaluation: Resource Manual.

    ERIC Educational Resources Information Center

    Hayden, David L.

    Intended for administrators and evaluators, the manual identifies models useful in evaluating special education programs in Maryland. An introduction to program evaluation, defines the concept of educational program evaluation, notes its purpose, and addresses its current status in the field of special education. Chapter 2 goes into greater depth…

  3. Nuclear material operations manual

    SciTech Connect

    Tyler, R.P.

    1981-02-01

    This manual provides a concise and comprehensive documentation of the operating procedures currently practiced at Sandia National Laboratories with regard to the management, control, and accountability of nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion.

  4. Chapter A5. Processing of Water Samples

    USGS Publications Warehouse

    Wilde, Franceska D.; Radtke, Dean B.; Gibs, Jacob; Iwatsubo, Rick T.

    1999-01-01

    The National Field Manual for the Collection of Water-Quality Data (National Field Manual) describes protocols and provides guidelines for U.S. Geological Survey (USGS) personnel who collect data used to assess the quality of the Nation's surface-water and ground-water resources. This chapter addresses methods to be used in processing water samples to be analyzed for inorganic and organic chemical substances, including the bottling of composite, pumped, and bailed samples and subsamples; sample filtration; solid-phase extraction for pesticide analyses; sample preservation; and sample handling and shipping. Each chapter of the National Field Manual is published separately and revised periodically. Newly published and revised chapters will be announced on the USGS Home Page on the World Wide Web under 'New Publications of the U.S. Geological Survey.' The URL for this page is http:/ /water.usgs.gov/lookup/get?newpubs.

  5. AEC Lowman Station - coal switching and magnesium-enhanced lime scrubbing to lower operating costs

    SciTech Connect

    Inkenhaus, W.; Babu, M.; Smith, K.; Loper, L.

    1997-12-31

    AEC`s Lowman Station is located in Leroy, Alabama. There are three coal-fired boilers at this station. Unit 1 is capable of generating 85 MW without a flue gas desulfurization, FGD, system. Units 2 and 3, with a total of 516 MW output capacity, are equipped with FGD systems. The FGD plant was designed for wet limestone FGD with natural oxidation. Lowman Station burned low sulfur, 1.3 to 1.8% sulfur, coal. In January of 1996 AEC switched Units 2 and 3 from limestone to magnesium-enhanced lime FGD operation. It was determined that the plant could take advantage of the higher SO{sub 2} removal efficiency of the magnesium-enhanced lime system. Major benefits resulting from this conversion were AEC`s ability to switch to a lower cost high sulfur coal while meeting the stringent SO{sub 2} emission requirements. Power cost savings resulted from the lower liquid to gas ratio required by the magnesium-enhanced lime process. Three recirculation pumps per module were reduced to a single operating pump per module, lowering the scrubber pressure drop. Significant cost reduction in the operating costs of the ball mill was realized due to modifications made to slake lime instead of grinding limestone. Prior to switching, personnel from AEC and Dravo Lime Company ran a four week test on magnesium-enhanced lime to obtain scrubber performance data including SO{sub 2} removal efficiencies on the modules while burning a 1.8% sulfur coal. This paper discusses the plant modifications that were needed to make the switch, cost justifications due to coal switching, and AEC`s operating experiences to date. AEC and Dravo Lime Company working together as a team conducted detailed cost studies, followed by extensive field tests and implemented the plant modifications. This plant continues to operate burning higher sulfur coal with the magnesium-enhanced lime FGD system.

  6. Human Rights: Respecting Our Differences, Teachers' Manual [And] Human Rights: Respecting Our Differences, Students' Manual.

    ERIC Educational Resources Information Center

    McCardle, Elizabeth, Ed.

    This unit on human rights designed for secondary students in Alberta, Canada includes both student and teacher manuals. Eleven chapters in the student manual examine what human rights are, the causes and effects of prejudice and discrimination, relevant laws, and social action. Each chapter includes readings followed by discussion questions and…

  7. Design and realization of an AEC&AGC system for the CCD aerial camera

    NASA Astrophysics Data System (ADS)

    Liu, Hai ying; Feng, Bing; Wang, Peng; Li, Yan; Wei, Hao yun

    2015-08-01

    An AEC and AGC(Automatic Exposure Control and Automatic Gain Control) system was designed for a CCD aerial camera with fixed aperture and electronic shutter. The normal AEC and AGE algorithm is not suitable to the aerial camera since the camera always takes high-resolution photographs in high-speed moving. The AEC and AGE system adjusts electronic shutter and camera gain automatically according to the target brightness and the moving speed of the aircraft. An automatic Gamma correction is used before the image is output so that the image is better for watching and analyzing by human eyes. The AEC and AGC system could avoid underexposure, overexposure, or image blurring caused by fast moving or environment vibration. A series of tests proved that the system meet the requirements of the camera system with its fast adjusting speed, high adaptability, high reliability in severe complex environment.

  8. A high voltage power supply for the AE-C and D low energy electron experiment

    NASA Technical Reports Server (NTRS)

    Gillis, J. A.

    1974-01-01

    A description is given of the electrical and mechanical design and operation of high voltage power supplies for space flight use. The supply was used to generate the spiraltron high voltage for low energy electron experiment on AE-C and D. Two versions of the supply were designed and built; one design is referred to as the low power version (AE-C) and the other as the high power version (AE-D). Performance is discussed under all operating conditions.

  9. Age-Related Conjunctival Disease in the C57BL/6.NOD-Aec1Aec2 Mouse Model of Sjögren Syndrome Develops Independent of Lacrimal Dysfunction

    PubMed Central

    You, In-Cheon; Bian, Fang; Volpe, Eugene A.; de Paiva, Cintia S.; Pflugfelder, Stephen C.

    2015-01-01

    Purpose. To investigate parameters of ocular surface disease in C57BL/6.NOD-Aec1Aec2 (Aec) mice with aging and their correlation with development of Sjögren syndrome (SS)–like lacrimal gland (LG) disease. Methods. Aec and C57BL/6 wild-type (B6) female mice were evaluated at 4, 12, and 20 weeks of age. Whole LG and eyes and adnexa were excised for histology and gene expression analysis and evaluated by flow cytometry and immunohistochemistry. Tear volume and goblet cell density was measured. Quantitative PCR evaluated T-cell–related cytokine expression in cornea and conjunctiva. Results. Both strains showed age-related conjunctival goblet cell loss that was more pronounced in the Aec strain and significantly greater than in B6 mice at 12 weeks. This was accompanied by CD4+ T-cell infiltration of the conjunctiva that was greater in Aec strain at 20 weeks. Aec mice had higher levels of IL-17A, IL-17R, IL-1α, IL-1β, and TNF-α in the conjunctiva, and they significantly increase with aging. Aec mice had greater lymphocytic infiltration of the LG and conjunctiva at 20 weeks that consisted of a mixture of CD4+ and CD8+ cells. Flow cytometry showed a significant increase in CD4+ T cells in Aec LG compared to B6 mice. Tear volume was significantly increased in both strains at 20 weeks. Conclusions. Aec mice developed greater conjunctival goblet cell loss associated with lymphocytic infiltration of the LG and conjunctiva with aging. Increased expression of certain T helper or inflammatory cytokines in these tissues was observed in Aec mice. The conjunctival disease appeared to be due to inflammation and not a decrease in tear volume. PMID:25758816

  10. Chapter A9. Safety in Field Activities

    USGS Publications Warehouse

    Lane, Susan L.; Ray, Ronald G.

    1998-01-01

    The National Field Manual for the Collection of Water-Quality Data (National Field Manual) describes protocols (requirements and recommendations) and provides guidelines for U.S. Geological Survey (USGS) personnel who collect data used to assess the quality of the Nation's surface-water and ground-water resources. This chapter of the manual addresses topics related to personal safety to be used in the collection of water-quality data, including: policies and general regulations on field safety; transportation of people and equipment; implementation of surface-water and ground-water activities; procedures for handling chemicals; and information on potentially hazardous environmental conditions, animals, and plants. Each chapter of the National Field Manual is published separately and revised periodically. Newly published and revised chapters will be announced on the USGS Home Page on the World Wide Web under 'New Publications of the U.S. Geological Survey.' The URL for this page is http://pubs.usgs.gov/publications/ index.html.

  11. Mathematics 8 and 9: Teacher Resource Manual. Curriculum, Interim 1989.

    ERIC Educational Resources Information Center

    Dawson, Jon, Ed.

    This teacher resource manual has been developed to assist classroom teachers in implementing the Integrated Occupational Mathematics program for grades 8 and 9. The first chapter of this manual gives an introduction including resources and scope/sequence. The next two chapters describe the overviews and instructional strategies of the grade 8 and…

  12. Aviation Machinist's Mate R 1 and C: Rate Training Manual.

    ERIC Educational Resources Information Center

    Naval Education and Training Command, Pensacola, FL.

    The profusely illustrated rate training manual is one of a series of training manuals prepared for enlisted personnel of the Navy and Naval Reserve who are studying for advancement in the Aviation Machinist's Mate R rating (ADR 1 and ADRC). Chapter one provides information helpful for use in advancement. Chapters two through ten consist of units…

  13. Engineering Aid 1 & C. Rate Training Manual.

    ERIC Educational Resources Information Center

    Naval Education and Training Command, Pensacola, FL.

    The manual is written primarily to aid in the training of personnel to meet the professional qualifications of the engineering aid, first class and chief. In chapter one, the trainee becomes familiar with the rewards and responsibilities of an engineering aid. Chapter two deals with principles of SEABEE administration, the organization and…

  14. Illinois Community College Board Policy Manual.

    ERIC Educational Resources Information Center

    Illinois Community Coll. Board, Springfield.

    The fifth in a series of revised editions since 1967, this 1978 manual provides policy guidelines for Illinois public community colleges. Chapter 1 covers the state college board definitions relative to community college operations policy. Chapter 2 deals with board operation and general policies according to such topics as power and duties;…

  15. Manual of Structural Kinesiology. Eighth Edition.

    ERIC Educational Resources Information Center

    Thompson, Clem W.

    This manual is intended for use in college-level courses in structural kinesiology; mechanical kinesiology is introduced only briefly. The first chapter introduces the bases for structural kinesiology. Subsequent chapters are organized according to the areas of the body to be studied (e.g., the shoulder girdle, the shoulder joint, the elbow joint,…

  16. Industrial Design in Education. Student Manual.

    ERIC Educational Resources Information Center

    Micklus, C. Samuel

    Background, principles, and procedures of industrial design are presented in this student manual. Chapter I describes the emergence of industrial design as a profession and emphasizes specific designers and their contributions to the field. A twenty question objective test is included. Chapter II presents ten principles of well-designed products.…

  17. Photographer's Mate 1 & C. Rate Training Manual.

    ERIC Educational Resources Information Center

    Naval Training Command, Pensacola, FL.

    The manual is one of a series written especially for the Photographer's Mate rating in the United States Navy; its contents are based directly on the qualifications for advancement to the first class petty officer and chief petty officer rates. The first three chapters of the manual cover topics related specifically to the Navy: photographer's…

  18. Healthy Young Children: A Manual for Programs.

    ERIC Educational Resources Information Center

    Kendrick, Abby Shapiro, Ed.; And Others

    This manual, which was developed as a reference and resource guide for program directors and teachers of young children, describes high standards for health policies. Also provided are information based on current research and recommendations from experts in health and early childhood education. The manual contains 7 sections and 19 chapters.…

  19. Industrial Design in Education. Teacher's Manual.

    ERIC Educational Resources Information Center

    Micklus, C. Samuel

    Contents of this teacher's manual for use in an industrial design course are the same as that of the companion student manual except that answers to the objective tests are included. Chapter I describes the emergence of industrial design as a profession and emphasizes specific designers and their contributions to the field. A twenty question…

  20. From Mars to Minerva: The origins of scientific computing in the AEC labs

    SciTech Connect

    Seidel, R.W. |

    1996-10-01

    Although the AEC laboratories are renowned for the development of nuclear weapons, their largess in promoting scientific computing also had a profound effect on scientific and technological development in the second half of the 20th century. {copyright} {ital 1996 American Institute of Physics.}

  1. Manual for Special Education Nurses.

    ERIC Educational Resources Information Center

    Schnetter, Vicki A., Ed.

    This manual aims (1) to provide a standard, well-referenced resource for Iowa special education nurses and (2) to provide direction and continuity for health services to pupils with special needs. The first chapter provides an overview of the special education nurse's role, including philosophy, definitions of assignments, levels of service, and…

  2. Manual on Training for Sheriffs.

    ERIC Educational Resources Information Center

    Giddings, Larry A.; And Others

    As part of a nationwide effort to professionalize the role of sheriff, this manual is designed to aid sheriffs who are in the process of planning or conducting a training program. In chapter 1 eleven specific objectives are identified for a department giving a training program: (1) to provide each deputy with the ability to function by himself;…

  3. Senior Adult Consumer Advisory Manual,

    ERIC Educational Resources Information Center

    Ater, E. Carolyn, Ed.

    This manual is intended for use by senior adult peer advisors (age 60 and over) engaged in helping relationships in providing consumer education to other senior adults. The advisory procedures are based on a problem solving approach which incorporates the development of a self-help concept. Chapter 1 provides information on consumer advising. It…

  4. A.C.T.I.V.E. Teacher Resource Manual: State and National Sources and Services.

    ERIC Educational Resources Information Center

    Vodola, Thomas M.

    Intended for teachers, the resource manual presents information on a nationally validated Title III adapted physical education program. An introductory chapter provides an overview of the manual, an explanation of the manual's organization and structure, and definitions. Chapter II describes Project ACTIVE's (All Children Totally Involved…

  5. Family Caregiving. A Manual for Caregivers of Older Adults.

    ERIC Educational Resources Information Center

    Mehrotra, Chandra, Ed.; And Others

    This manual provides caregivers with practical knowledge and suggestions that could be of help to them in this important role. Chapter 1 gives an overview of the volume and tells how to use it. Chapter 2 identifies who caregivers are, what they do, and what changes have taken place in their lives since they became caregivers. Chapter 3 begins with…

  6. Inservice Kit: Evaluating and Improving Teaching Performance. Trainer's Manual.

    ERIC Educational Resources Information Center

    Mireau, Laurie

    This manual is for use by the trainer or leader of a workshop based upon the inservice manual: "Evaluating and Improving Teaching Performance." In the introduction, suggestions for planning, logistics, equipment, and evaluation of a successful workshop are made. The chapters are linked to those of the inservice manual by topic of the workshop…

  7. Hanford Waste Vitrification Plant technical manual

    SciTech Connect

    Larson, D.E.; Watrous, R.A.; Kruger, O.L.

    1996-03-01

    A key element of the Hanford waste management strategy is the construction of a new facility, the Hanford Waste Vitrification Plant (HWVP), to vitrify existing and future liquid high-level waste produced by defense activities at the Hanford Site. The HWVP mission is to vitrify pretreated waste in borosilicate glass, cast the glass into stainless steel canisters, and store the canisters at the Hanford Site until they are shipped to a federal geological repository. The HWVP Technical Manual (Manual) documents the technical bases of the current HWVP process and provides a physical description of the related equipment and the plant. The immediate purpose of the document is to provide the technical bases for preparation of project baseline documents that will be used to direct the Title 1 and Title 2 design by the A/E, Fluor. The content of the Manual is organized in the following manner. Chapter 1.0 contains the background and context within which the HWVP was designed. Chapter 2.0 describes the site, plant, equipment and supporting services and provides the context for application of the process information in the Manual. Chapter 3.0 provides plant feed and product requirements, which are primary process bases for plant operation. Chapter 4.0 summarizes the technology for each plant process. Chapter 5.0 describes the engineering principles for designing major types of HWVP equipment. Chapter 6.0 describes the general safety aspects of the plant and process to assist in safe and prudent facility operation. Chapter 7.0 includes a description of the waste form qualification program and data. Chapter 8.0 indicates the current status of quality assurance requirements for the Manual. The Appendices provide data that are too extensive to be placed in the main text, such as extensive tables and sets of figures. The Manual is a revision of the 1987 version.

  8. Chapter Four: Discursive Resources

    ERIC Educational Resources Information Center

    Young, Richard F.

    2008-01-01

    In this chapter, the focus of attention moves from the contexts described in chapter 3 to the verbal, nonverbal, and interactional resources that participants employ in discursive practices. These resources are discussed within the frame of participation status and participation framework proposed by Goffman. Verbal resources employed by…

  9. Management Manual.

    ERIC Educational Resources Information Center

    San Joaquin Delta Community Coll. District, CA.

    This manual articulates the rights, responsibilities, entitlements, and conditions of employment of management personnel at San Joaquin Delta College (SJDC). The manual first presents SJDC's mission statement and then discusses the college's management goals and priorities. An examination of SJDC's administrative organization and a list of…

  10. Terminology Manual.

    ERIC Educational Resources Information Center

    Felber, Helmut

    A product of the International Information Center for Terminology (Infoterm), this manual is designed to serve as a reference tool for practitioners active in terminology work and documentation. The manual explores the basic ideas of the Vienna School of Terminology and explains developments in the area of applied computer aided terminography…

  11. Resource Manual

    ERIC Educational Resources Information Center

    Human Development Institute, 2008

    2008-01-01

    This manual was designed primarily for use by individuals with developmental disabilities and related conditions. The main focus of this manual is to provide easy-to-read information concerning available resources, and to provide immediate contact information for the purpose of applying for resources and/or locating additional information. The…

  12. Manual de Carpinteria (Carpentry Manual).

    ERIC Educational Resources Information Center

    TomSing, Luisa B.

    This manual is part of a Mexican series of instructional materials designed for Spanish speaking adults who are in the process of becoming literate or have recently become literate in their native language. The manual describes a carpentry course that is structured to appeal to the student as a self-directing adult. The following units are…

  13. Chapter 9: Electronics

    SciTech Connect

    Grupen, Claus; Shwartz, Boris A.

    2006-12-19

    Sophisticated front-end electronics are a key part of practically all modern radiation detector systems. This chapter introduces the basic principles and their implementation. Topics include signal acquisition, electronic noise, pulse shaping (analog and digital), and data readout techniques.

  14. 76 FR 60511 - Amendment of Marine Safety Manual, Volume III

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-29

    ... Federal Register (73 FR 3316). Background and Purpose Chapter 16 of Volume III of the Marine Safety Manual... have questions about this notice, call or e-mail Luke B. Harden, Mariner Credentialing Program...

  15. Chapter 3: Energy Security

    SciTech Connect

    Foust, Thomas D.; Arent, Doug; de Carvalho Macedo, Isaias; Goldemberg, Jose; Hoysala, Chanakya; Filho, Rubens Maciel; Nigro, Francisco E. B.; Richard, Tom L.; Saddler, Jack; Samseth, Jon; Somerville, Chris R.

    2015-04-01

    This chapter considers the energy security implications and impacts of bioenergy. We provide an assessment to answer the following questions: What are the implications for bioenergy and energy security within the broader policy environment that includes food and water security, development, economic productivity, and multiple foreign policy aspects? What are the conditions under which bioenergy contributes positively to energy security?

  16. Recruiter's Manual.

    ERIC Educational Resources Information Center

    Reed, Michael; Recio, Manuel

    The manual assists both experienced and inexperienced personnel in defining and completing the entire range of tasks associated with the position of Pennsylvania Migrant Education Recruiter. The recruiter's primary responsibilities are to identify migrant children in the area and enroll those children eligible under Title I ESEA (Elementary and…

  17. Boilermaking Manual.

    ERIC Educational Resources Information Center

    British Columbia Dept. of Education, Victoria.

    This manual is intended (1) to provide an information resource to supplement the formal training program for boilermaker apprentices; (2) to assist the journeyworker to build on present knowledge to increase expertise and qualify for formal accreditation in the boilermaking trade; and (3) to serve as an on-the-job reference with sound, up-to-date…

  18. Computer Manual.

    ERIC Educational Resources Information Center

    Illinois State Office of Education, Springfield.

    This manual designed to provide the teacher with methods of understanding the computer and its potential in the classroom includes four units with exercises and an answer sheet. Unit 1 covers computer fundamentals, the mini computer, programming languages, an introduction to BASIC, and control instructions. Variable names and constants described…

  19. Student Manual.

    ERIC Educational Resources Information Center

    Stapleton, Diana L., Comp.

    This manual for student assistants employed in the government document section of the Eastern Kentucky University Library covers policy and procedures and use of the major reference tools in this area. General policies and procedures relating to working hours and conditions, and general responsibilities are discussed, as well as shelving rules and…

  20. Electrostatic precipitator manual

    SciTech Connect

    McDonald, J.R.; Dean, A.H.

    1982-01-01

    Studies performed by various individuals and organizations on the application of electrostatic precipitators to the collection of fly ash produced in the combustion of pulverized fuel are summarized in this manual. The scope of the studies evaluated include full scale precipitators and laboratory investigations. It covers measurement of fly ash resistivity, rapping reentrainment, conditioning agents, fundamental operations of hot-side precipitators. The major chapter headings are: Terminology and General Design Features Associated with Electrostatic Precipitators Used to Collect Fly Ash Particles; Fundamental Principles of Electrostatic Precipitation; Limiting Factors Affecting Precipitator Performance; Use of Electrostatic Precipitators for the Collection of Fly Ash; Analysis of Factors influencing ESP Performance; Emissions from Electrostatic Precipitators; Choosig an Electrostatic Precipitator: Cold-side versus Hot-side; Safety Aspects of Working with Electrostatic Precipitators; Maintenance Procedures; Troubleshooting; An Electrostatic Precipitator Computer Model; Features of a Well-equipped Electrostatic Precipitator.

  1. Diagnostic and vaccine chapter.

    PubMed

    Wolfram, J H; Kokanov, S K; Verkhovsky, O A

    2010-10-01

    The first report in this chapter describes the development of a killed composite vaccine. This killed vaccine is non-infectious to humans, other animals, and the environment. The vaccine has low reactivity, is non-abortive, and does not induce pathomorphological alterations to the organs of vaccinated animals. The second report of this chapter describes the diagnostic value of a competitive enzyme-linked immunosorbent assay for detecting Brucella-specific antibodies and its ability to discriminate vaccinated cattle from infected cattle. The results indicated that the competitive enzyme-linked immunosorbent assay is more sensitive than traditional tests for detecting antibodies to Brucella abortus in naturally and experimentally infected cattle. PMID:20850688

  2. Doses measured using AEC on direct digital radiographic (DDR) X-rays systems: updated results with an RP 162 perspective.

    PubMed

    Bowden, L; Faulkner, R; Gallagher, A; O'Connor, U; Walsh, C; Dowling, A; O'Reilly, G

    2013-02-01

    As digital technology in diagnostic radiology systems becomes more prevalent, there is a need to provide comparative dose information for these new systems. This is needed in particular for testing the automatic exposure control (AEC) devices on direct digital radiography (DDR) systems as there is no consensus on the receptor dose level in the current guidelines. The new European Commission RP 162 document sets the suspension level for the 'verification of kerma at receptor entrance in computed radiography and DDR systems under AEC' as ≥10 µGy. This document also notes that alternate methodologies are acceptable, and may require adjustment in the suspension level if used. This study provides a range of typical doses under AEC for DDR systems, for a variety measurement methodologies, including that described in RP 162.

  3. EPICS Input Output Controller (IOC) Record Reference Manual

    SciTech Connect

    Anderson, J.B.; Kraimer, M.R.

    1994-12-01

    This manual describes all supported EPICS record types. The first chapter gives introduction and describes the field summary table. The second chapter describes the fields in database common, i.e. the fields that are present in every record type. The third chapter describes the input and output field that are common to many record types and have the same usage wherever they are used. Following the third chapter is a separate chapter for each record type containing a description of all the fields for that record type except those in database common.

  4. Procedures for Conducting a Job Analysis: A Manual for the COMTASK Database.

    ERIC Educational Resources Information Center

    Alvic, Fadia M.; Newkirk-Moore, Susan

    This manual provides the information needed to conduct a job analysis and to enter or update job analysis information in the Computerized Task Inventory (COMTASK) database. Chapter I presents the purpose and organization of the manual. The second chapter provides a brief background on the purpose and design of COMTASK, a definition of terms used…

  5. Conference Report: International Research Symposium on Ankyloblepharon-Ectodermal Defects-Cleft Lip and/or Palate (AEC) Syndrome

    PubMed Central

    Fete, Mary; vanBokhoven, Hans; Clements, Suzanne; McKeon, Frank; Roop, Dennis R.; Koster, Maranke I.; Missero, Caterina; Attardi, Laura D.; Lombillo, Vivian A.; Ratovitski, Edward; Julapalli, Meena; Ruths, Derek; Sybert, Virginia P.; Siegfried, Elaine C.; Bree, Alanna F.

    2009-01-01

    Ankyloblepharon-Ectodermal Defects-Cleft Lip/Palate (AEC) Syndrome (Hay-Wells syndrome, MIM #106220) is a rare autosomal dominant ectodermal dysplasia syndrome. It is due to mutations in the p63 gene, known to be a regulatory gene with many downstream gene targets. TP63 is important in the differentiation and proliferation of the epidermis, as well as many other processes including limb and facial development. It is also known that mutations in p63 lead to skin erosions. These erosions, especially on the scalp, are defining features of AEC syndrome and cause significant morbidity and mortality in these patients. It was this fact that led to the 2003 AEC Skin Erosion Workshop. That conference laid the groundwork for the International Research Symposium for AEC Syndrome held at Texas Children's Hospital in 2006. The conference brought together the largest cohort of individuals with AEC syndrome, along with a multitude of physicians and scientists. The overarching goals were to define the clinical and pathologic findings for improved diagnostic criteria, to obtain tissue samples for further study and to define future research directions. The symposium was successful in accomplishing these aims as detailed in this conference report. Following our report, we also present eleven manuscripts within this special section that outline the collective clinical, pathologic and mutational data from eighteen individuals enrolled in the concurrent Baylor College of Medicine IRB-approved protocol: Characterization of AEC syndrome. These collaborative findings will hopefully provide a stepping stone to future translational projects of p63 and p63-related syndromes. PMID:19353643

  6. Keeping Your Baby Healthy: A Practical Manual for Black Parents.

    ERIC Educational Resources Information Center

    Dennis, Sharon, Ed.

    Based on the belief that black parents have the power to prevent many of their children's health problems, and thus the responsibility to do so, this manual provides practical advice and lists resources in seven chapters. Chapters concern: (1) prenatal care; (2) having a baby; (3) the child's first 12 months; (4) information every parent should…

  7. Fitness in the Elementary Schools. Second Edition. A Teacher's Manual.

    ERIC Educational Resources Information Center

    Pangrazi, Robert P.; Hastad, Douglas N.

    The first chapter of this manual discusses the impact physical activity has on the growth and development of youngsters. It offers a rationale for including physical education in the school curriculum. Guidelines for exercising children safely are offered, including a section on weight training for children. Chapter 2 includes the Physical Best…

  8. Air Conditioning, Heating, and Refrigeration. Competency-Based Curriculum Manual.

    ERIC Educational Resources Information Center

    Gourley, Frank A., Jr.

    This manual was developed to serve as an aid to administrators and instructors involved with postsecondary air conditioning, heating, and refrigeration programs. The first of six chapters contains general information on program implementation, the curriculum design, facilities and equipment requirements, and textbooks and references. Chapter 2…

  9. Child Care Center Start-Up Manual (2nd Edition).

    ERIC Educational Resources Information Center

    Broome County Child Development Council, Inc., Binghamton, NY.

    This manual is intended to be used as a guideline for establishing a high quality child care program. It is based on New York State regulations and on widely accepted practices that support early childhood development. Chapter 1 gives an overview of the start-up process and includes a checklist of major tasks. Chapter 2 discusses assessment…

  10. Agricultural Development Workers Training Manual. Volume IV. Livestock.

    ERIC Educational Resources Information Center

    Bacon, Neil; And Others

    This training manual, the last volume in a four-volume series for use in training Peace Corps workers, deals with livestock. The first chapter provides suggested guidelines for setting up and carrying out the livestock component of the agricultural development worker training course. Included in the second chapter are lesson plans covering the…

  11. Signalman 1 and C: Rate Training Manual. Revised.

    ERIC Educational Resources Information Center

    Naval Education and Training Command, Pensacola, FL.

    The rate training manual is designed to help meet the occupational qualifications for advancement to Signalman First Class (SMI) and Chief Signalman (SMC). Chapter one discusses advancement, its rewards, responsibilities, and requirements. In chapter two administrative and training duties are explained with special emphasis on the coverage of the…

  12. Spaces and Places: A Geography Manual for Teachers.

    ERIC Educational Resources Information Center

    Kemball, Walter, Ed.

    This manual is designed as a resource guide for preservice and classroom teachers with an interest in geographic education. The chapters cover a variety of topics including the most recent developments in geographic education. Each chapter offers suggestions and ideas that can be included in general geography/social studies methods courses or…

  13. Manual for Reducing Educational Unit Costs in Latin American Countries.

    ERIC Educational Resources Information Center

    Centro Multinacional de Investigacion Educativa, San Jose (Costa Rica).

    Designed for educational administrators, this manual provides suggestions for reducing educational unit costs in Latin America without reducing the quality of the education. Chapter one defines unit cost concepts and compares the costs of the Latin American countries. Chapter two deals with the different policies which could affect the principal…

  14. Help Yourself: A Manual for Dealing with Sexual Harassment.

    ERIC Educational Resources Information Center

    Lebrato, Mary T., Ed.

    This manual provides an overview of sexual harassment and what can be done about it. Although it deals with laws in California, its general sections and sections of federal laws could be used by persons in any state. The guide contains 12 chapters. Chapter 1 includes a discussion of what sexual harassment is and how it affects society and the…

  15. Second Language Acquisition by Adult Immigrants: A Field Manual.

    ERIC Educational Resources Information Center

    Perdue, Clive, Ed.

    The field manual for a series of coordinated studies of the spontaneous acquisition of a second language by adult immigrant workers provides a theoretical and practical framework for the entire project and a source of information about it for other researchers. Chapters 1 and 2 describe the project's objectives and organization. Chapter 3 reviews…

  16. Motivation and the Disadvantaged Trainee: A Manual for Instructors.

    ERIC Educational Resources Information Center

    Radcliffe, Donald V.; And Others

    Chapter One of this manual includes a definition of "disadvantagement," and discussion of implications for manpower requirements, distribution of the disadvantaged, employment conditions and outlook, early environment, predominant acquired characteristics, and response to training. Chapter Two discusses concepts of motivation, including drives,…

  17. Style Manual: A Guide to Writing and Producing Publications.

    ERIC Educational Resources Information Center

    Maryland State Dept. of Education, Baltimore.

    The chief aim of this style manual is to promote clarity and consistency in writing for publication. The chapters are intended to help writers understand the publication process that begins with a need to communicate with a particular audience and ends with the distribution of the finished product. The first chapter on planning and producing a…

  18. Manual of Accreditation Standards for Adventure Programs 1995.

    ERIC Educational Resources Information Center

    Williamson, John E., Comp.; Gass, Michael, Comp.

    This manual presents standards for adventure education programs seeking accreditation from the Association for Experiential Education. The manual is set up sequentially, focusing both on objective standards such as technical risk management aspects, and on subjective standards such as teaching approaches used in programs. Chapter titles provide…

  19. 7 CFR 300.4 - Reference Manual B.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... CFR chapter III by the Director of the Office of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. (b) Availability. Copies of Reference Manual B: (1) Are available for... 7 Agriculture 5 2010-01-01 2010-01-01 false Reference Manual B. 300.4 Section 300.4...

  20. Aviation Structural Mechanic E 3 & 2. Rate Training Manual.

    ERIC Educational Resources Information Center

    Naval Training Publications Center, Memphis, TN.

    This manual is one of a series of training manuals prepared for enlisted personnel in the Navy and Naval Reserve who are studying for advancement according to the Aviation Structural Mechanic E (AME) rating. The text is based on the professional qualifications for the rates AME3 and AME2. Contents include a 10-chapter text and a reading list…

  1. 46 CFR 154.1809 - Loading and stability manual.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... manual. (b) The loading and stability manual must contain: (1) Information that enables the master to load and ballast the vessel while keeping structural stresses within design limits; and (2) The information required by § 170.110 of this chapter....

  2. Guidelines for Serving Students with Limited English Proficiency. Administrative Manual.

    ERIC Educational Resources Information Center

    Biagini, Joyce; And Others

    A revision of a manual first produced in 1980, this guide is designed to help local school districts in Minnesota meet the educational needs of their limited-English-proficient (LEP) students in academically and administratively expedient ways. The chapters in the manual, which correspond to topics pertinent to designing and maintaining an LEP…

  3. Opticalman 1 and C, Rate Training Manual. [1972 Revised Edition].

    ERIC Educational Resources Information Center

    Naval Personnel Program Support Activity, Washington, DC.

    In this revised edition of an earlier publication (ED 070 574), fundamentals of optical instruments on board ships are presented in this rate training manual for regular navy and naval reserve personnel. The manual includes nine chapters: Introduction; Administration and Supervision; Nature of Light; Optical Alignment Instruments; Night Vision…

  4. Training Manual for the Energy Conservation Analysis Project.

    ERIC Educational Resources Information Center

    Massachusetts Univ., Amherst. Cooperative Extension Service.

    This document is the Massachusetts Energy Extension Service training manual for Residential Energy Auditors. This manual is part of a four-week program to train persons to perform home energy audits and was developed under the Energy Conservation Analysis Project (ECAP) at the University of Massachusetts. The chapter titles include: (1) Project…

  5. Lawyers for Literacy. A Bar Leadership Manual. A Special Service Publication of the American Bar Association's Task Force on Literacy.

    ERIC Educational Resources Information Center

    American Bar Association, Washington, DC.

    This manual is designed to provide materials to help state and local bar associations become involved with the literacy issue. Chapter 1 provides an overview of illiteracy as a very serious problem. Chapter 2 describes major public and private efforts to combat illiteracy. Chapter 3 explains why the bar associations should be involved. Chapter 4…

  6. New Careers: The Patrolman Aide. Trainer's Manual.

    ERIC Educational Resources Information Center

    White, Richardson, Jr.; Stein, John H.

    Designed to assist in developing a training program to equip unemployed and underemployed persons with the skills needed for helping patrolmen to provide community service, the manual discusses several aspects of implementing the training program in the first four chapters: "New Careers and Law Enforcement,""Relevance of New Careers to Law…

  7. International Labour Standards. A Workers' Education Manual.

    ERIC Educational Resources Information Center

    International Labour Office, Geneva (Switzerland).

    Concerned with the standard-setting work of the International Labor Organization (ILO), this manual is chiefly intended to provide guidance for worker's education instructors and trade union officials. It contains nine chapters: (1) the ILO origins and history are traced and the structure is explained; (2 & 3) procedures for the origination and…

  8. School Facilities Manual. Revised Fourth Edition.

    ERIC Educational Resources Information Center

    Washington Office of the State Superintendent of Public Instruction, Olympia.

    This Washington State manual explains the full spectrum of activities involved in the planning, design, and construction of successful and cost-effective projects for school facilities. Chapters cover advance planning; financing; site selection; educational specifications; consultant selection; school design; bidding, evaluation, and award of…

  9. Being a Nursing Aide; Student Manual.

    ERIC Educational Resources Information Center

    American Hospital Association, Chicago, IL.

    Developed for students receiving on-the-job training as nursing aides, this illustrated manual contains these chapters: (1) Orientation, (2) Introduction to the Patient, (3) Your Working Environment, (4) The Patient's Unit: Making the Unoccupied Bed, (5) Lifting, Moving, and Transporting Patients: Making the Occupied Bed, (6) Personal Care of the…

  10. Michigan Public Library Trustee Manual. 1998 Edition.

    ERIC Educational Resources Information Center

    Michigan Library, Lansing.

    This manual is designed to give public library trustees basic information on the structure of library service in Michigan, with emphasis on the trustees' major areas of responsibility, in order to help trustees understand and fulfill their obligations. In particular, the "Action Checklist" at the end of each chapter is designed to assist trustees…

  11. Electrician's Mate 3 & 2: Rate Training Manual.

    ERIC Educational Resources Information Center

    Naval Education and Training Command, Pensacola, FL.

    The training manual provides information related to the tasks assigned to the Electrician's Mate Third and Second Class who operate and maintain power and lighting systems and associated equipment. Individual chapters deal with: career challenges for the Electrician's Mate, safety precautions, test equipment, electrical installations, A-C power…

  12. Occupational Work Experience. Manual of Operation.

    ERIC Educational Resources Information Center

    Ohio State Dept. of Education, Columbus. Div. of Vocational and Adult Education.

    This manual is designed to assist school personnel, employers, parents/guardians, and students in understanding the policies and procedures required to operate effective occupational work experience (OWE) programs. The OWE mission statement appears first. Chapter I describes the OWE program, its structure, types of program organization, and…

  13. Florida CHOICES Counselor's Manual 1983-84.

    ERIC Educational Resources Information Center

    Glenn, Thomas R.; Rogers, Zelda

    This manual for counselors is intended for use with CHOICES, a computer assisted career guidance system. Following a brief introduction to CHOICES, the structure (in chart form) and an overview of the contents of the CHOICES system are given. Chapter 2 focuses on counseling clients, emphasizing the three-step helping process, i.e., preCHOICES, to…

  14. Chapter A10. Lakes and reservoirs: Guidelines for study design and sampling

    USGS Publications Warehouse

    Green, William R.; Robertson, Dale M.; Wilde, Franceska D.

    2015-09-29

    Within this chapter are references to other chapters of the NFM that provide more detailed guidelines related to specific topics and more detailed protocols for the quality assurance and assessment of the lake and reservoir data. Protocols and procedures to address and document the quality of lake and reservoir investigations are adapted from, or referenced to, the protocols and standard operating procedures contained in related chapters of this National Field Manual.

  15. The Melwood Manual: A Planning and Operations Manual for Horticultural Training and Work Co-op Programs.

    ERIC Educational Resources Information Center

    Melwood Horticultural Training Center, Inc., Upper Marlboro, MD.

    This manual is intended as a resource for anyone involved in planning, developing, and/or operating a horticultural training or work co-op program for the handicapped. Following an introductory chapter, the manual is divided into three parts with the greatest weight given to the second part. Part I elaborates on development of the horticulture…

  16. Crafts Development and Marketing Manual. Appropriate Technologies for Development. Peace Corps Information Collection & Exchange Manual Series No. M-24.

    ERIC Educational Resources Information Center

    Ramsay, Caroline C.; And Others

    This manual was developed to help Peace Corps volunteers assist local craftspeople in developing nations in initiating and operating small businesses to produce and market their products. The manual is organized in eight chapters that cover the following topics: the crafts environment, common problems and solutions for a crafts business,…

  17. Standalone Terrestrial Laser Scanning for Efficiently Capturing Aec Buildings for As-Built Bim

    NASA Astrophysics Data System (ADS)

    Bassier, M.; Vergauwen, M.; Van Genechten, B.

    2016-06-01

    With the increasing popularity of as-built building models for the architectural, engineering and construction (AEC) industry, the demand for highly accurate and dense point cloud data is rising. The current data acquisition methods are labour intensive and time consuming. In order to compete with indoor mobile mapping systems (IMMS), surveyors are now opting to use terrestrial laser scanning as a standalone solution. However, there is uncertainty about the accuracy of this approach. The emphasis of this paper is to determine the scope for which terrestrial laser scanners can be used without additional control. Multiple real life test cases are evaluated in order to identify the boundaries of this technique. Furthermore, this research presents a mathematical prediction model that provides an indication of the data accuracy given the project dimensions. This will enable surveyors to make informed discussions about the employability of terrestrial laser scanning without additional control in mid to large-scale projects.

  18. Nutrient dynamics: Chapter 3

    USGS Publications Warehouse

    Likens, Gene E.; LaBaugh, James W.; Buso, Donald C.; Bade, Darren; Winter, Thomas C.; Likens, Gene E.

    2009-01-01

    This chapter focuses on the variability and trends in chemical concentrations and fluxes at Mirror Lake during the period 1981–2000. It examines the water and chemical budgets of Mirror Lake to identify and understand better long-term trends in the chemical characteristics of the lake. It also identifies the causes of changes in nutrient concentrations and examines the contribution of hydrologic pathways to the contamination of Mirror Lake by road salt. The role of groundwater and precipitation on water and chemical budgets of the lake are also examined.

  19. Growth, nutritional, and gastrointestinal aspects of ankyloblepharon-ectodermal defect-cleft lip and/or palate (AEC) syndrome

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Ankyloblepharon-ectodermal defect-cleft lip and/or palate (AEC), is a rare genetic disorder due to mutations in the TP63 gene. In the present study, we characterized the pattern of growth and body composition, and the nutritional and gastrointestinal aspects of children and adults (n = 18) affected ...

  20. CERCLA Compliance with Other Laws Manual: CERCLA compliance with the CWA and SDWA. Fact sheet (Final)

    SciTech Connect

    Not Available

    1990-02-01

    The fact sheet provides a guide to Chapters 3 and 4 of Part I of the CERCLA Compliance with Other Laws Manual. The sixth in a series, the fact sheet focuses on CERCLA compliance with the Clean Water Act (Chapter 3), and Safe Drinking Water Act (Chapter 4), and discusses other statutes with provisions relevant to surface water or drinking water.

  1. Utilizing a simple CT dosimetry phantom for the comprehension of the operational characteristics of CT AEC systems

    SciTech Connect

    Tsalafoutas, Ioannis A.; Varsamidis, Athanasios; Thalassinou, Stella; Efstathopoulos, Efstathios P.

    2013-11-15

    Purpose: To investigate the utility of the nested polymethylacrylate (PMMA) phantom (which is available in many CT facilities for CTDI measurements), as a tool for the presentation and comparison of the ways that two different CT automatic exposure control (AEC) systems respond to a phantom when various scan parameters and AEC protocols are modified.Methods: By offsetting the two phantom's components (the head phantom and the body ring) half-way along their longitudinal axis, a phantom with three sections of different x-ray attenuation was created. Scan projection radiographs (SPRs) and helical scans of the three-section phantom were performed on a Toshiba Aquilion 64 and a Philips Brilliance 64 CT scanners, with different scan parameter selections [scan direction, pitch factor, slice thickness, and reconstruction interval (ST/RI), AEC protocol, and tube potential used for the SPRs]. The dose length product (DLP) values of each scan were recorded and the tube current (mA) values of the reconstructed CT images were plotted against the respective Z-axis positions on the phantom. Furthermore, measurements of the noise levels at the center of each phantom section were performed to assess the impact of mA modulation on image quality.Results: The mA modulation patterns of the two CT scanners were very dissimilar. The mA variations were more pronounced for Aquilion 64, where changes in any of the aforementioned scan parameters affected both the mA modulations curves and DLP values. However, the noise levels were affected only by changes in pitch, ST/RI, and AEC protocol selections. For Brilliance 64, changes in pitch affected the mA modulation curves but not the DLP values, whereas only AEC protocol and SPR tube potential selection variations affected both the mA modulation curves and DLP values. The noise levels increased for smaller ST/RI, larger weight category AEC protocol, and larger SPR tube potential selection.Conclusions: The nested PMMA dosimetry phantom can be

  2. A Course on Operational Considerations in Wastewater Treatment Plant Design. Instructor's Manual.

    ERIC Educational Resources Information Center

    Cooper, John W.; And Others

    This manual contains 17 instructional units (sequenced to correspond to parallel chapters in a student's manual) focusing on upgrading the design of wastewater plant facilities and serving as a reference source for establishing criteria for upgrading wastewater treatment plants. The manual also furnishes information for modifying plant design to…

  3. 46 CFR 95.05-1 - Fire detecting, manual alarm, and supervised patrol systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Fire detecting, manual alarm, and supervised patrol... Required § 95.05-1 Fire detecting, manual alarm, and supervised patrol systems. (a) Fire detecting, manual... chapter. (b) In each compartment containing explosives, and in adjacent cargo compartments, there shall...

  4. 46 CFR 95.05-1 - Fire detecting, manual alarm, and supervised patrol systems.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Fire detecting, manual alarm, and supervised patrol... Required § 95.05-1 Fire detecting, manual alarm, and supervised patrol systems. (a) Fire detecting, manual... chapter. (b) In each compartment containing explosives, and in adjacent cargo compartments, there shall...

  5. 46 CFR 95.05-1 - Fire detecting, manual alarm, and supervised patrol systems.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Fire detecting, manual alarm, and supervised patrol... Required § 95.05-1 Fire detecting, manual alarm, and supervised patrol systems. (a) Fire detecting, manual... chapter. (b) In each compartment containing explosives, and in adjacent cargo compartments, there shall...

  6. 46 CFR 95.05-1 - Fire detecting, manual alarm, and supervised patrol systems.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Fire detecting, manual alarm, and supervised patrol... Required § 95.05-1 Fire detecting, manual alarm, and supervised patrol systems. (a) Fire detecting, manual... chapter. (b) In each compartment containing explosives, and in adjacent cargo compartments, there shall...

  7. 46 CFR 95.05-1 - Fire detecting, manual alarm, and supervised patrol systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Fire detecting, manual alarm, and supervised patrol... Required § 95.05-1 Fire detecting, manual alarm, and supervised patrol systems. (a) Fire detecting, manual... chapter. (b) In each compartment containing explosives, and in adjacent cargo compartments, there shall...

  8. Melt inclusions: Chapter 6

    USGS Publications Warehouse

    ,; Lowenstern, J. B.

    2014-01-01

    Melt inclusions are small droplets of silicate melt that are trapped in minerals during their growth in a magma. Once formed, they commonly retain much of their initial composition (with some exceptions) unless they are re-opened at some later stage. Melt inclusions thus offer several key advantages over whole rock samples: (i) they record pristine concentrations of volatiles and metals that are usually lost during magma solidification and degassing, (ii) they are snapshots in time whereas whole rocks are the time-integrated end products, thus allowing a more detailed, time-resolved view into magmatic processes (iii) they are largely unaffected by subsolidus alteration. Due to these characteristics, melt inclusions are an ideal tool to study the evolution of mineralized magma systems. This chapter first discusses general aspects of melt inclusions formation and methods for their investigation, before reviewing studies performed on mineralized magma systems.

  9. Manual compactor

    NASA Technical Reports Server (NTRS)

    Stevenson, Grant E. (Inventor)

    1979-01-01

    A manual compactor having two handles each pivoted at one end for movement through adjacent arcs toward and away from each other, such reciprocating activation motion being translated into rotary motion in a single direction by means of ratchet and pawl arrangements about the pivot shaft of each handle, and thenceforth to rotary motion of opposing screws one each of which is driven by each handle, which in turn act through ball nut structures to forcibly draw together plates with force sufficient for compacting, the handles also having provisions for actuating push rod within the handles for the purpose of disengaging the pawls from the ratchets thereby allowing retraction through spring loading of the plates and repositioning of the apparatus for subsequent compacting.

  10. PLOT3D user's manual

    NASA Technical Reports Server (NTRS)

    Walatka, Pamela P.; Buning, Pieter G.; Pierce, Larry; Elson, Patricia A.

    1990-01-01

    PLOT3D is a computer graphics program designed to visualize the grids and solutions of computational fluid dynamics. Seventy-four functions are available. Versions are available for many systems. PLOT3D can handle multiple grids with a million or more grid points, and can produce varieties of model renderings, such as wireframe or flat shaded. Output from PLOT3D can be used in animation programs. The first part of this manual is a tutorial that takes the reader, keystroke by keystroke, through a PLOT3D session. The second part of the manual contains reference chapters, including the helpfile, data file formats, advice on changing PLOT3D, and sample command files.

  11. Asphalt Raking. Instructor Manual. Trainee Manual.

    ERIC Educational Resources Information Center

    Laborers-AGC Education and Training Fund, Pomfret Center, CT.

    This packet consists of the instructor and trainee manuals for an asphalt raking course. The instructor manual contains a course schedule for 4 days of instruction, content outline, and instructor outline. The trainee manual is divided into five sections: safety, asphalt basics, placing methods, repair and patching, and clean-up and maintenance.…

  12. Chapter 4: Solar Magnetism

    NASA Astrophysics Data System (ADS)

    Venkatakrishnan, P.; Gosain, Sanjay

    2008-10-01

    This chapter is basically divided into 2 parts. In the first part, the important properties of the solar magnetic field are summarized. The discussion begins with a simple introduction to solar magneto hydrodynamics. This introduction will be sufficient to understand the current status of the solar dynamo theory that follows. Some very curious and interesting results on force free fields are then presented in very basic terms. Finally, the application of this theoretical framework to the problems of coronal heating, solar flares and coronal mass ejections are developed in a simple unified scheme, based on a hierarchy of physical conditions. The second part consists of a tutorial on magnetographs. It begins with a description of polarization of light from very fundamental notions of coherence of light. This is followed by simple but comprehensive explanations of the Zeeman and Hanle effects along with the necessary basic ideas of quantum physics of scattering of light. Then the working of a few important magnetographs is outlined, with special emphasis on a solar vector magnetograph developed for USO, to provide a ''hands on" perspective. The article concludes with a few brief remarks on the possible future directions for research in the domain of solar magnetism...

  13. Chapter 20: Graphite

    SciTech Connect

    Burchell, Timothy D

    2012-01-01

    Graphite is truly a unique material. Its structure, from the nano- to the millimeter scale give it remarkable properties that lead to numerous and diverse applications. Graphite bond anisotropy, with strong in-plane covalent bonds and weak van der Waals type bonding between the planes, gives graphite its unique combination of properties. Easy shear of the crystal, facilitated by weak interplaner bonds allows graphite to be used as a dry lubricant, and is responsible for the substances name! The word graphite is derived from the Greek to write because of graphites ability to mark writing surfaces. Moreover, synthetic graphite contains within its structure, porosity spanning many orders of magnitude in size. The thermal closure of these pores profoundly affects the properties for example, graphite strength increases with temperature to temperatures in excess of 2200 C. Consequently, graphite is utilized in many high temperature applications. The basic physical properties of graphite are reviewed here. Graphite applications include metallurgical; (aluminum and steel production), single crystal silicon production, and metal casting; electrical (motor brushes and commutators); mechanical (seals, bearings and bushings); and nuclear applications, (see Chapter 91, Nuclear Graphite). Here we discuss the structure, manufacture, properties, and applications of Graphite.

  14. Synthesis: Chapter 19

    USGS Publications Warehouse

    Pardo, L.H.; Geiser, L.H.; Fenn, M.E.; Driscoll, C.T.; Goodale, C.L.; Allen, E.B.; Baron, J. S.; Bobbink, R.; Bowman, W.D.; Clark, C.M.; Emmett, B.; Gilliam, F.S.; Greaver, T.; Hall, S.J.; Lilleskov, E.A.; Liu, L.; Lynch, J.A.; Nadelhoffer, K.; Perakis, S.S.; Robin-Abbott, M. J.; Stoddard, J.L.; Weathers, K. C.

    2011-01-01

    Human activity in the last century has led to a substantial increase in nitrogen (N) emissions and deposition (Galloway et al. 2003). Because of past, and, in some regions, continuing increases in emissions (Lehmann et al. 2005, Nilles and Conley 2001), this N deposition has reached a level that has caused or is likely to cause alterations and damage in many ecosystems across the United States. In some ecoregions, the impact of N deposition has been severe and has changed the biotic community structure and composition of ecosystems. In the Mediterranean California ecoregion, for example (see Chapter 13), replacement of native by exotic invasive vegetation is accelerated because exotic species are often more productive under elevated N deposition than native species in some California grasslands, coastal sage scrub, and desert scrub (Fenn et al. 2010, Rao and Allen 2010, Rao et al. 2010, Weiss 1999, Yoshida and Allen 2004). Such shifts in plant community composition and species richness can have consequences beyond changes in ecosystem structure: shifts may lead to overall losses in biodiversity and further impair particular threatened or endangered species (Stevens et al. 2004). Th e extirpation of the endangered checkerspot butterfl y (Euphydryas editha bayensis), because the host plant for the larval stage disappears in N-enriched ecosystems (Fenn et al. 2010, Weiss 1999), is just one example of the detrimental impacts of elevated N deposition.

  15. Career development through local chapter involvement: perspectives from chapter members.

    PubMed

    Thomas, Melissa; Inniss-Richter, Zipporah; Mata, Holly; Cottrell, Randall R

    2013-07-01

    The importance of career development in professional organizations has been noted in the literature. Personal and professional benefits of membership regardless of discipline can be found across the career spectrum from student to executive. The benefits of professional membership with respect to career development in local chapter organizations have seldom been studied. Local chapter participation may offer significant career development opportunities for the practitioner, faculty member, and student. The purpose of this study was to explore the importance of local chapter involvement to the career development of health education practitioners. An 18-item questionnaire was disseminated to the membership of three local SOPHE (Society for Public Health Education) chapters that explored the level of local chapter involvement and the impact of how specific professional development activities impacted career development. The results of the survey highlighted the importance of continuing education programs, networking, and leadership experience in developing one's career that are offered by local SOPHE chapter involvement. Making a positive impact in the community and earning the respect of one's peers were most often reported as indicators of career success. These factors can directly impact local chapter participation. Career development can certainly be enhanced by active participation in the local chapter of a professional association.

  16. Career development through local chapter involvement: perspectives from chapter members.

    PubMed

    Thomas, Melissa; Inniss-Richter, Zipporah; Mata, Holly; Cottrell, Randall R

    2013-07-01

    The importance of career development in professional organizations has been noted in the literature. Personal and professional benefits of membership regardless of discipline can be found across the career spectrum from student to executive. The benefits of professional membership with respect to career development in local chapter organizations have seldom been studied. Local chapter participation may offer significant career development opportunities for the practitioner, faculty member, and student. The purpose of this study was to explore the importance of local chapter involvement to the career development of health education practitioners. An 18-item questionnaire was disseminated to the membership of three local SOPHE (Society for Public Health Education) chapters that explored the level of local chapter involvement and the impact of how specific professional development activities impacted career development. The results of the survey highlighted the importance of continuing education programs, networking, and leadership experience in developing one's career that are offered by local SOPHE chapter involvement. Making a positive impact in the community and earning the respect of one's peers were most often reported as indicators of career success. These factors can directly impact local chapter participation. Career development can certainly be enhanced by active participation in the local chapter of a professional association. PMID:23539263

  17. Basic data report for drillhole AEC 8 (Waste Isolation Pilot Plant - WIPP). [Eddy County, New Mexico

    SciTech Connect

    Not Available

    1983-01-01

    AEC 8 was originally drilled in 1974 to a depth of 3028 ft by Oak Ridge National Laboratory as part of the initial investigations of a site for radioactive waste disposal. In 1976, Sandia National Laboratories deepened the borehole from the top of the Castile Formation into the Bell Canyon Formation to test the hydraulic properties of the Bell Canyon. The borehole encountered in descending order Holocene sands (20 ft), Mescalero caliche (6 ft), Santa Rosa Sandstone (143 ft), Dewey Lake Redbeds (491 ft), Rustler Formation (322 ft), Salado Formation (1990 ft), Castile Formation (1335 ft), and the upper Bell Canyon Formation (603 ft). The borehole stratigraphy is in normal order and there is no significant deformation. An extensive suite of geophysical logs provides information on the lithology and stratigraphy. The potentiometric surfaces of Bell Canyon fluid-bearing zones are 550 ft (for the zone at 4821 ft to 4827 ft) and 565 ft below land surface (for the zone at 4844 to 4860 ft). The WIPP is a demonstration facility for the disposal of transuranic (TRU) waste from defense programs. The WIPP will also provide a research facility to investigate the interactions between bedded salt and high level wastes.

  18. A global model of the neutral thermosphere in magnetic coordinates based on AE-C data

    NASA Technical Reports Server (NTRS)

    Stehle, C. G.; Nisbet, J. S.; Bleuler, E.

    1983-01-01

    Molecular nitrogen, atomic oxygen, and helium densities obtained from the AE-C satellite are analyzed in magnetic latitude and magnetic local time coordinates and compared to OGO 6 data for various seasons and magnetic activity levels. A depletion region for atomic oxygen and helium with respect to molecular nitrogen at high magnetic latitudes in the postmidnight magnetic local time sector persists under both high and low solar activity conditions. A global model in magnetic coordinates, patterned after the mass spectrometer and incoherent scatter (MSIS) model, is developed for molecular nitrogen, atomic oxygen, and helium. It is shown to represent the data well, without any residual UT dependence, and with an accuracy comparable to that provided by the more complex MSIS model with longitude terms The advantage of using magnetic coordinates is that they are more directly related to the major energy inputs and momentum sources in the polar regions than are geographic coordinates and are more convenient to use in studies of high latitude energy deposition processes. This is important for comparison with theoretical models where the number of coordinates is limited.

  19. Collective Intelligence. Chapter 17

    NASA Technical Reports Server (NTRS)

    Wolpert, David H.

    2003-01-01

    Many systems of self-interested agents have an associated performance criterion that rates the dynamic behavior of the overall system. This chapter presents an introduction to the science of such systems. Formally, collectives are defined as any system having the following two characteristics: First, the system must contain one or more agents each of which we view as trying to maximize an associated private utility; second, the system must have an associated world utility function that rates the possible behaviors of that overall system. In practice, collectives are often very large, distributed, and support little, if any, centralized communication and control, although those characteristics are not part of their formal definition. A naturally occurring example of a collective is a human economy. One can identify the agents and their private utilities as the human individuals in the economy and the associated personal rewards they are each trying to maximize. One could then identify the world utility as the time average of the gross domestic product. ("World utility" per se is not a construction internal to a human economy, but rather something defined from the outside.) To achieve high world utility it is necessary to avoid having the agents work at cross-purposes lest phenomena like liquidity traps or the Tragedy of the Commons (TOC) occur, in which agents' individually pursuing their private utilities lowers world utility. The obvious way to avoid such phenomena is by modifying the agents utility functions to be "aligned" with the world utility. This can be done via punitive legislation. A real-world example of an attempt to do this was the creation of antitrust regulations designed to prevent monopolistic practices.

  20. Innovative and Alternative Technology Assessment Manual

    SciTech Connect

    1980-02-01

    This four chapter, six appendix manual presents the procedures and methodology as well as the baseline costs and energy information necessary for the analysis and evaluation of innovative and alternative technology applications submitted for federal grant assistance under the innovative and alternative technology provisions of the Clean Water Act of 1977. The manual clarifies and interprets the intent of Congress and the Environmental Protection Agency in carrying out the mandates of the innovative and alternative provisions of the Clean Water Act of 1977. [DJE 2005

  1. Explanatory chapter: PCR primer design.

    PubMed

    Álvarez-Fernández, Rubén

    2013-01-01

    This chapter is intended as a guide on polymerase chain reaction (PCR) primer design (for information on PCR, see General PCR and Explanatory Chapter: Troubleshooting PCR). In the next section, general guidelines will be provided, followed by a discussion on primer design for specific applications. A list of recommended software tools is shown at the end.

  2. Chapter 59: Web Services

    NASA Astrophysics Data System (ADS)

    Graham, M. J.

    Web services are a cornerstone of the distributed computing infrastructure that the VO is built upon yet to the newcomer, they can appear to be a black art. This perception is not helped by the miasma of technobabble that pervades the subject and the seemingly impenetrable high priesthood of actual users. In truth, however, there is nothing conceptually difficult about web services (unsurprisingly any complexities will lie in the implementation details) nor indeed anything particularly new. A web service is a piece of software available over a network with a formal description of how it is called and what it returns that a computer can understand. Note that entities such as web servers, ftp servers and database servers do not generally qualify as they lack the standardized description of their inputs and outputs. There are prior technologies, such as RMI, CORBA, and DCOM, that have employed a similar approach but the success of web services lies predominantly in its use of standardized XML to provide a language-neutral way for representing data. In fact, the standardization goes further as web services are traditionally (or as traditionally as five years will allow) tied to a specific set of technologies (WSDL and SOAP conveyed using HTTP with an XML serialization). Alternative implementations are becoming increasingly common and we will cover some of these here. One important thing to remember in all of this, though, is that web services are meant for use by computers and not humans (unlike web pages) and this is why so much of it seems incomprehensible gobbledegook. In this chapter, we will start with an overview of the web services current in the VO and present a short guide on how to use and deploy a web service. We will then review the different approaches to web services, particularly REST and SOAP, and alternatives to XML as a data format. We will consider how web services can be formally described and discuss how advanced features such as security, state

  3. Advanced Concepts. Chapter 21

    NASA Technical Reports Server (NTRS)

    Johnson, Les; Mulqueen, Jack

    2013-01-01

    Before there is a funded space mission, there must be a present need for the mission. Space science and exploration are expensive, and without a well-defined and justifiable need, no one is going to commit significant funding for any space endeavor. However, as discussed in Chapter 1, applications of space technology and many and broad, hence there are many ways to determine and establish a mission need. Robotic science missions are justified by their science return. To be selected for flight, questions like these must be addressed: What is the science question that needs answering, and will the proposed mission be the most cost-effective way to answer it? Why does answering the question require an expensive space flight, instead of some ground-based alternative? If the question can only be answered by flying in space, then why is this approach better than other potential approaches? How much will it cost? And is the technology required to answer the question in hand and ready to use? If not, then how much will it cost and how long will it take to mature the technology to a usable level? There are also many ways to justify human exploration missions, including science return, technology advancement, as well as intangible reasons, such as national pride. Nonetheless, many of the questions that need answering, are similar to those for robotic science missions: Where are the people going, why, and will the proposed mission be the most cost-effective way to get there? What is the safest method to achieve the goal? How much will it cost? And is the technology required to get there and keep the crew alive in hand and ready to use? If not, then how much will it cost and how long will it take to mature the technology to a usable level? Another reason for some groups sending spacecraft into space is for profit. Telecommunications, geospatial imaging, and tourism are examples of proven, market-driven space missions and applications. For this specific set of users, the

  4. Promoting certification: the chapter's role.

    PubMed

    Staul, Luann

    2011-01-01

    The mission of the American Association of Critical-Care Nurses focuses on providing nurses with expert knowledge to promote delivery of excellent, safe, quality care to acutely and critically ill patients and their families. Chapters consist of professional leaders in a community who carry on the mission work of the American Association of Critical-Care Nurses at the local level. Chapters can emphasize the value of certification and continuing education, because they offer a wide spectrum of opportunities to meet the learning and developmental needs of nurses as they advance in their professional careers. This article will highlight strategies that can be implemented by local chapters to facilitate and promote certification.

  5. Pesticide Applicator Training Manual, Category 2 - Forest Pest Control. A Training Program for the Certification of Commercial Pesticide Applicators.

    ERIC Educational Resources Information Center

    Sinclair, W. A., Comp.

    This manual provides information needed to meet specific standards for certification as a pesticide applicator. Each of the eight chapters deals with a different aspect of pesticide use. Chapter one discusses the problems of use as it relates to safety of humans and the environment. Chapter two is concerned with the identification and diagnosis of…

  6. Pesticide Applicator Training Manual, Category 1 - Agricultural, Subcategory - Plant. A Training Program for the Certification of Commercial Pesticide Applicators.

    ERIC Educational Resources Information Center

    Dewey, J. E., Ed.; Pendleton, R. F., Ed.

    This manual provides information needed to meet specific standards for certification as a pesticide applicator. Each of the eight chapters deals with a different aspect of pesticide use. Chapter one discusses the problems of use, particularly those associated with safety. Chapter two is concerned with the identification and diagnosis of insects…

  7. Using Microsoft Access XP: A How-To-Do-It Manual for Librarians. How-To-Do-It Manuals for Librarians, Number 120.

    ERIC Educational Resources Information Center

    Butler, E. Sonny; Napier, Timothy R.

    This manual is designed to assist librarians in programming unique database applications that meet specific library needs. Chapter 1 goes over the basic functions of working with Windows, describes terms such as multitasking, and shows how to use the menu and tool bars. Chapter 2 covers the basics, defines some useful terms, and presents the steps…

  8. Pesticide Dealers Training Manual. Manual 100.

    ERIC Educational Resources Information Center

    Missouri Univ., Columbia. Agricultural Experiment Station.

    This training manual provides information needed by pesticide dealers to meet the requirements of the Missouri Pesticide Act of 1974. A complete copy of the Act accompanies the manual. Pertinent sections to dealers are quoted and additionally explained through comment, interpretation, and example. (CS)

  9. Concrete Practices & Procedures. Instructor Manual. Trainee Manual.

    ERIC Educational Resources Information Center

    Laborers-AGC Education and Training Fund, Pomfret Center, CT.

    This packet consists of the instructor and trainee manuals for a concrete practices and procedures course. The instructor manual contains a schedule for an 80-hour, 10-day course and instructor outline. The outline provides a step-by-step description of the instructor's activities and includes answer sheets to accompany questions on information…

  10. Nutrient Control Design Manual

    EPA Science Inventory

    The Nutrient Control Design Manual will present an extensive state-of-the-technology review of the engineering design and operation of nitrogen and phosphorous control technologies and techniques applied at municipal wastewater treatment plants (WWTPs). This manual will present ...

  11. Plant Biotech Lab Manual.

    ERIC Educational Resources Information Center

    Tant, Carl

    This book provides laboratory experiments to enhance any food science/botany curriculum. Chapter 1, "Introduction," presents a survey of the techniques used in plant biotechnology laboratory procedures. Chapter 2, "Micronutrition," discusses media and nutritional requirements for tissue culture studies. Chapter 3, "Sterile Seeds," focuses on the…

  12. Nutrient Control Design Manual

    EPA Science Inventory

    The purpose of this EPA design manual is to provide updated, state‐of‐the‐technology design guidance on nitrogen and phosphorus control at municipal Wastewater Treatment Plants (WWTPs). Similar to previous EPA manuals, this manual contains extensive information on the principles ...

  13. KDYNA user's manual

    SciTech Connect

    Levatin, J.A.L.; Attia, A.V.; Hallquist, J.O.

    1990-09-28

    This report is a complete user's manual for KDYNA, the Earth Sciences version of DYNA2D. Because most features of DYNA2D have been retained in KDYNA much of this manual is identical to the DYNA2D user's manual.

  14. NUCLEAR SCIENCE REFERENCES CODING MANUAL

    SciTech Connect

    WINCHELL,D.F.

    2007-04-01

    This manual is intended as a guide for Nuclear Science References (NSR) compilers. The basic conventions followed at the National Nuclear Data Center (NNDC), which are compatible with the maintenance and updating of and retrieval from the Nuclear Science References (NSR) file, are outlined. The NSR database originated at the Nuclear Data Project (NDP) at Oak Ridge National Laboratory as part of a project for systematic evaluation of nuclear structure data.1 Each entry in this computer file corresponds to a bibliographic reference that is uniquely identified by a Keynumber and is describable by a Topic and Keywords. It has been used since 1969 to produce bibliographic citations for evaluations published in Nuclear Data Sheets. Periodic additions to the file were published as the ''Recent References'' issues of Nuclear Data Sheets prior to 2005. In October 1980, the maintenance and updating of the NSR file became the responsibility of the NNDC at Brookhaven National Laboratory. The basic structure and contents of the NSR file remained unchanged during the transfer. In Chapter 2, the elements of the NSR file such as the valid record identifiers, record contents, and text fields are enumerated. Relevant comments regarding a new entry into the NSR file and assignment of a keynumber are also given in Chapter 2. In Chapter 3, the format for keyword abstracts is given followed by specific examples; for each TOPIC, the criteria for inclusion of an article as an entry into the NSR file as well as coding procedures are described. Authors preparing Keyword abstracts either to be published in a Journal (e.g., Nucl. Phys. A) or to be sent directly to NNDC (e.g., Phys. Rev. C) should follow the illustrations in Chapter 3. The scope of 1See W.B.Ewbank, ORNL-5397 (1978). the literature covered at the NNDC, the categorization into Primary and Secondary sources, etc., is discussed in Chapter 4. Useful information regarding permitted character sets, recommended abbreviations, etc., is

  15. Lithographer 3 and 2: Naval Rate Training Manual and Nonresident Career Course.

    ERIC Educational Resources Information Center

    Naval Education and Training Command, Pensacola, FL.

    The rate training manual and nonresident career course (RTM/NRCC) form is a self-study package that will enable third class and second class lithographers to fulfill the requirements for that rating. Chapter one provides a brief history of printing and discusses the duties and qualifications of the Navy lithographer. Chapters two through eighteen…

  16. Ship's Serviceman Laundry Handbook: Rate Training Manual and Non-Resident Career Course.

    ERIC Educational Resources Information Center

    Naval Education and Training Command, Pensacola, FL.

    The manual and course form a self study package that enables laundrymen to fulfill the requirements of the Ship's Serviceman (Laundry) rating. Chapter 1 provides information regarding the administration of ship's service activities (equipment maintenance, supervisory responsibilities, and procurement of supplies). Chapters 2 through 12 cover the…

  17. Engineering Aid 3 & 2, Vol. 1. Rate Training Manual and Nonresident Career Course.

    ERIC Educational Resources Information Center

    Naval Education and Training Command, Washington, DC.

    Designed for individual study and not formal classroom instruction, this rate training manual provides subject matter that relates directly to the occupational qualifications of the Engineering Aid (EA) rating. This eight-chapter volume focuses on administrative matters, mathematics, and basic drafting. Chapter 1 discusses the scope of the EA…

  18. Technical Report and Data File User's Manual for the 1992 National Adult Literacy Survey.

    ERIC Educational Resources Information Center

    Kirsch, Irwin; Yamamoto, Kentaro; Norris, Norma; Rock, Donald; Jungeblut, Ann; O'Reilly, Patricia; Berlin, Martha; Mohadjer, Leyla; Waksberg, Joseph; Goksel, Huseyin; Burke, John; Rieger, Susan; Green, James; Klein, Merle; Campbell, Anne; Jenkins, Lynn; Kolstad, Andrew; Mosenthal, Peter; Baldi, Stephane

    Chapter 1 of this report and user's manual describes design and implementation of the 1992 National Adult Literacy Survey (NALS). Chapter 2 reviews stages of sampling for national and state survey components; presents weighted and unweighted response rates for the household component; and describes non-incentive and prison sample designs. Chapter…

  19. Financing and Sustaining Mobility Programs in Rural Areas: A Manual. Final Report.

    ERIC Educational Resources Information Center

    Wallin, Theodore A.; Kidder, Alice

    This manual focuses on the start-up and operation of low-cost transportation in rural areas. A principal focus is the use of volunteers and/or the consolidation of rides through a brokerage program. Chapter One provides an overview of what financial and operating decisions must be made to design a volunteer system. Chapter Two describes easy…

  20. Health Professions and Nursing Student Loan and Scholarship Programs. Manual of Information, Policies, and Procedures.

    ERIC Educational Resources Information Center

    National Institutes of Health (DHEW), Bethesda, MD. Bureau of Health Manpower Education.

    This manual covers basic policies and procedures governing four student loan and scholarship programs administered within the Bureau of Health Manpower, National Institutes of Health. An introductory chapter provides definitions, procedures, and reporting common to all programs, and this is followed by chapters describing: (1) The Health…

  1. Air Controlman 3 and 2: Naval Rate Training Manual and Nonresident Career Course.

    ERIC Educational Resources Information Center

    Naval Education and Training Command, Pensacola, FL.

    The Rate Training Manual is one of a series of training manuals prepared for enlisted personnel of the Navy and Naval Reserve studying for advancement in the Air Controlman (AC) rating to Air Controlman Third and Second Class. Chapter 1 discusses air controlman qualifications, the enlisted rating structure, the Air Controlman rating, references…

  2. Strengthening Skills for Success: A Manual To Help Parents Support Their Psychiatrically Disabled Youth's Community Employment.

    ERIC Educational Resources Information Center

    Cook, Judith A.; And Others

    The manual provides information and suggestions to parents of youth with psychiatric disabilities, based on the program at Thresholds, a psychiatric rehabilitation center in Chicago, Illinois. The manual includes case examples, exercises, and space for parent responses. Chapters have the following titles and topics: "The Importance to You of Your…

  3. References & Resources for Secretaries and Clerical Personnel, 1980. Manual 4200-1.

    ERIC Educational Resources Information Center

    Van Gelder, Naneene, Ed.

    Developed as a resource guide for all secretaries and clerical personnel employed in the San Diego Community College District (SDCCD), this manual provides information on matters ranging from district procedures and office operations to English usage and professional growth. The manual's 21 chapters cover: (1) district history, philosophy, and…

  4. Physical Fitness Programs for Law Enforcement Officers: A Manual for Police Administrators.

    ERIC Educational Resources Information Center

    Price, Clifford S.; And Others

    This manual is the final report of a study on the development of methods and programs to promote physical fitness among police officers. In twelve chapters the following topics are covered: (1) principles of exercise; (2) research methodology used to compile this manual; (3) results of physical fitness evaluation of program volunteers; (4)…

  5. 1983-1984 Official Wisconsin Junior Dairymen's Association Manual. Bulletin No. 4097.

    ERIC Educational Resources Information Center

    Wisconsin State Dept. of Public Instruction, Madison. Bureau for Vocational Education.

    This manual contains information needed for conducting local chapters of the Wisconsin Junior Dairymen's Association program. Included in the manual is a summary of the year's program of work, lists of previous award winners, and rules for the many contests held annually by the association. Blank forms are provided for contest entry, association…

  6. Ohoyo Training Manual. Leadership: Self Help American Indian-Alaska Native Women.

    ERIC Educational Resources Information Center

    Verble, Sedelta D.; Walton, M. Frances

    The training manual provides self-help in six areas of leadership development for American Indian and Alaska Native women. Following an introduction describing how to use the manual are six chapters focusing on the theories and development of leadership skills, the vulnerability of Indian women to poverty, nontraditional careers for Indian women,…

  7. Near Full-Length Genomic Characterization of a Novel CRF 01_AE/C Recombinant from Western India.

    PubMed

    Karade, Santosh; Pandey, Sudhanshu; Gianchandani, Sheetal; Kurle, Swarali N; Ghate, Manisha; Gaikwad, Nitin S; Rewari, Bharat B; Gangakhedkar, Raman R

    2015-12-01

    HIV is known for its genetic variability across the globe. The HIV epidemic in India is primarily driven by subtype C, although sporadic circulating and unique recombinant forms are also reported from a few metropolitan cities in which genotyping facilities are available. Here we report a novel CRF01_AE/C recombinant from a multicenter study on the effectiveness of antiretroviral therapy (ART), 12 months after its initiation. Our subject is a 32-year-old heterosexual female, a native of Pune city in western India. Identification and analyses of recombination breakpoints using jpHMM@Gobics and SimPlot bootscanning revealed six recombination breakpoints, indicating insertion of the CRF01_AE genome at three points in the backbone of subtype C. Both subtype C and CRF01_AE are commonly seen in the population at risk of heterosexual HIV transmission, thereby providing an opportunity for cocirculation and recombination. The emergence of a novel recombinant of CRF01_AE/C is indicative of the increasing genetic diversity of the HIV epidemic in India.

  8. Conservation Education: A Planning Guide. Manual Series M-23.

    ERIC Educational Resources Information Center

    Wood, David S.; Wood, Diane Walton

    The purpose of this manual is to help individuals and groups design and implement conservation education programs that will effectively bring about improved environmental management. The chapters describe: (1) how to gather environmental and social data for designing appropriate education programs; (2) how to judge the strengths and weaknesses of…

  9. Teaching Biology to Visually Handicapped Students. Resource Manual.

    ERIC Educational Resources Information Center

    Ricker, Kenneth S.

    This resource manual presents numerous techniques for adapting science activities to the visually handicapped student, applicable to introductory biology courses in which microscopes are used extensively in the laboratory. Chapters include information on the following: alternative microscopic viewing techniques, physical models, tactile diagrams,…

  10. Gunner's Mate G 3 and 2; Rate Training Manual. Revised.

    ERIC Educational Resources Information Center

    Naval Education and Training Command, Pensacola, FL.

    The rate training manual has been prepared for men of the regular Navy and of the Naval Reserve for the purpose of advancement to increase knowledge in the various aspects of the Gunner's Mate rating (G 3 and 2). Chapters 1 through 14 deal with the following topics: the requirements of the Gunner's Mate G Rating, explosives and pyrotechnics,…

  11. Chlorination of Wastewater, Manual of Practice No. 4.

    ERIC Educational Resources Information Center

    Water Pollution Control Federation, Washington, DC.

    This manual reviews chlorination practices in the treatment and disposal of wastes from the earliest known applications. The application of chlorination for various purposes is described but no attempt has been made to compare chlorination with other methods. Included are chapters on the development and practice of wastewater chlorination,…

  12. Training Manual for Human Service Risk Managers. Final Report.

    ERIC Educational Resources Information Center

    Davis, Frank W.; And Others

    This manual is designed to educate human service agency management personnel involved in transportation about basic risk management principles and insurance issues. Chapter I illustrates the liability factors that create the insurance and risk management needs. Both legal and humanitarian obligations of human service agencies involved in…

  13. Small Scale Beekeeping. Appropriate Technologies for Development. Manual M-17.

    ERIC Educational Resources Information Center

    Gentry, Curtis

    This manual is designed to assist Peace Corps volunteers in the development and implementation of small-scale beekeeping programs as a tool for development. Addressed in the individual chapters are bees and humans; project planning; the types and habits of bees; the essence of beekeeping; bee space and beehives; intermediate technology beekeeping;…

  14. Diversified Cooperative Training. Diversified Cooperative Health Occupations. Manual of Operation.

    ERIC Educational Resources Information Center

    Ohio State Dept. of Education, Columbus. Div. of Vocational and Adult Education.

    This manual is designed to assist school personnel, employers, parents/guardians, and students in understanding the policies and procedures required to operate effective diversified cooperative training (DCT) and diversified cooperative health occupations (DCHO) programs. Chapter I describes DCT/DCHO programs, their structure, types of program…

  15. The Waiter and Waitress Training Manual. Revised Edition.

    ERIC Educational Resources Information Center

    Mitchell, Barbara J.

    This manual is intended for use in pre-employment or upgrading training programs for persons who are planning to work or are presently working in the hotel and restaurant food service industry. Eleven chapters cover interpersonal relationships with employers, fellow employees, and customers; grooming and personal hygiene; sanitary food handling;…

  16. Quartermaster 3 & 2. Rate Training Manual and Nonresident Career Course.

    ERIC Educational Resources Information Center

    Naval Education and Training Command, Pensacola, FL.

    One of a series of training manuals prepared for enlisted personnel in the Navy and Naval Reserve, this self-study package provides subject matter that relates directly to the occupational qualifications of the Quartermaster rating. Contents include a 16-chapter text followed by a glossary, subject index, and the associated nonresident career…

  17. Health in Day Care: A Manual for Health Professionals.

    ERIC Educational Resources Information Center

    Deitch, Selma R., Ed.

    Addressed especially to community pediatricians, but also useful to other health workers, this manual discusses aspects of day care that require a physician's attention. Chapter I historically traces the positive effect of a nurturing environment upon the development of the infant and child, covering the period from the early 1900s to the present.…

  18. Best Practices Manual for Idaho Gifted/Talented Programs.

    ERIC Educational Resources Information Center

    Idaho State Dept. of Education. Special Education Section.

    This manual for Idaho school districts covers the identification, assessment, and educational needs of students who show intellectual promise, specific academic performance, leadership, creativity, or talent in the visual or performing arts. It is organized into seven chapters and seven appendices which take up approximately half the publication.…

  19. 7 CFR 300.3 - Reference Manual A.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... CFR chapter III by the Director of the Office of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. (b) Availability. Copies of Reference Manual A: (1) Are available for... at NARA, call 202-741-6030, or go to:...

  20. A Manual for Training Leaders in Exploring Parenting.

    ERIC Educational Resources Information Center

    Littlejohn (Roy) Associates, Inc., Washington, DC.

    This manual is designed for individuals responsible for training Head Start staff and parents to lead "Exploring Parenting" groups. It focuses on the role of trainers of groups of leaders and effective training methods. Chapter 1, "Approach to Training," describes the approach to training group leaders in a nonthreatening, structured group…

  1. Engineering Aid 3 & 2, Vol. 2. Rate Training Manual.

    ERIC Educational Resources Information Center

    Bernal, Benito C., Jr.

    Designed for individual study and not formal classroom instruction, this rate training manual provides subject matter that relates directly to the occupational qualifications of the Engineering Aid (EA) rating. This volume contains 10 chapters which deal with: (1) wood and light frame structures (examining the uses, kinds, sizes, and grades of…

  2. Practical Poultry Raising. Appropriate Technologies for Development. Manual M-11.

    ERIC Educational Resources Information Center

    French, Kenneth M.

    This manual is designed to provide development workers with the information and tools needed to begin or to improve poultry production. Covered in the individual chapters are the following topics: the nature and scope of poultry production, assessment of local poultry selections, basic information about chickens, country chickens, poultry…

  3. Commercial Economic Poisons Applicators Licensing Manual, Rough Draft.

    ERIC Educational Resources Information Center

    Michigan State Dept. of Agriculture, Lansing, Div. of Plant Industry.

    This pesticide manual gives information on types of pest management, labels and labeling of pesticide containers, safety, types of pesticides (including chapters on insecticides, fungicides, herbicides, and nematicides), spray equipment, identification of pests (including weeds, plant diseases, and vertebrates), and environmental considerations.…

  4. Aviation Support Equipment Technician E 3 & 2. Rate Training Manual.

    ERIC Educational Resources Information Center

    Naval Education and Training Command, Pensacola, FL.

    The training manual is designed as a self study text for use by Navy and Naval Reserve personnel preparing to meet the professional qualifications for advancement to Petty Officer Third Class and Petty Officer Second Class in the rating of Aviation Support Equipment (ASE) Technician E (Electrical). The first chapter provides information on the…

  5. Mission Possible: Spy a Book! 2003 Texas Reading Club Manual.

    ERIC Educational Resources Information Center

    Heard, Adriana Flores; Ingham, Donna; McDermott, Joe; Meyer, Sally; Parrish, Leila; Schill, Victor; Trevino, Rose

    The purpose of this manual for the 2003 Texas Reading Club, "Mission Possible: Spy a Book!" is to assist library staff who serve youth by suggesting ideas for programs that will attract children to the library. The following chapters are included: (1) Marketing, Cooperation and PR; (2) Serving Children with Disabilities; (3) Theme Songs; (4)…

  6. New Careers: The Teacher Aide. A Manual for Trainers.

    ERIC Educational Resources Information Center

    Steinberg, Sheldon S.; Fishman, Jacob R.

    This manual is intended for use by trainers of teacher aides in New Careers programs (which focus on training the unemployed and/or underemployed for entry-level placement as nonprofessionals in human service occupations). An introductory chapter considers the qualifications of the training team, qualifications of the trainee, the function and job…

  7. New Directions for Rural Women: A Workshop Leader's Manual.

    ERIC Educational Resources Information Center

    Ronan, Marian

    A field tested workshop program to prepare rural women for education and job opportunities is described in this comprehensive manual for workshop leaders. An introductory chapter states program goals and philosophy and covers planning and implementing the workshops; topics include staff selection, publicity and recruiting, materials, workshop size…

  8. 7 CFR 300.2 - Dry Kiln Operator's Manual.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... in 7 CFR chapter III by the Director of the Office of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. (b) The kiln drying schedules specified in the Dry Kiln Operator's Manual... Wood Articles” (7 CFR 319.40-1 through 319.40-11) may be imported into the United States....

  9. 7 CFR 300.2 - Dry Kiln Operator's Manual.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... in 7 CFR chapter III by the Director of the Office of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. (b) The kiln drying schedules specified in the Dry Kiln Operator's Manual... Wood Articles” (7 CFR 319.40-1 through 319.40-11) may be imported into the United States....

  10. 7 CFR 300.2 - Dry Kiln Operator's Manual.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... in 7 CFR chapter III by the Director of the Office of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. (b) The kiln drying schedules specified in the Dry Kiln Operator's Manual... Wood Articles” (7 CFR 319.40-1 through 319.40-11) may be imported into the United States....

  11. 7 CFR 300.2 - Dry Kiln Operator's Manual.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... in 7 CFR chapter III by the Director of the Office of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. (b) The kiln drying schedules specified in the Dry Kiln Operator's Manual... Wood Articles” (7 CFR 319.40-1 through 319.40-11) may be imported into the United States....

  12. 7 CFR 300.2 - Dry Kiln Operator's Manual.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... in 7 CFR chapter III by the Director of the Office of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. (b) The kiln drying schedules specified in the Dry Kiln Operator's Manual... Wood Articles” (7 CFR 319.40-1 through 319.40-11) may be imported into the United States....

  13. Agricultural Development Workers Training Manual. Volume III. Crops.

    ERIC Educational Resources Information Center

    Leonard, David; And Others

    This training manual, the third volume in a four-volume series of curriculum guides for use in training Peace Corps agricultural development workers, deals with crops. The first chapter provides suggested guidelines for setting up and carrying out the crops component of the agricultural development worker training series. Included in the second…

  14. Training Manual on Food Irradiation Technology and Techniques.

    ERIC Educational Resources Information Center

    United Nations Food and Agriculture Organization, Rome (Italy).

    This training manual consists of two parts. The first covers general information and outlines various applications of food irradiation technology. The second section details laboratory exercises used to demonstrate the principles of radiation processing and the effects of radiation treatment on certain types of food. The chapters outline…

  15. You and Me and Human Sexuality. Teacher's Manual.

    ERIC Educational Resources Information Center

    Young, Emily Morrill

    This teacher's manual is designed for teaching deaf adolescents about human sexuality. Each chapter is organized into topic objectives, large group content presentation strategies, small group activities, materials, and resources. Topics include: (1) relationships; (2) adolescent growth and development; (3) female and male anatomy; (4) conception,…

  16. Agricultural Development Workers Training Manual. Volume II. Extension Skills.

    ERIC Educational Resources Information Center

    Menard, Peter; And Others

    This training manual, the second volume in a four-volume series of curriculum guides for use in training Peace Corps agricultural development workers, deals with extension skills. The first chapter provides suggested guidelines for setting up and carrying out the extension skills component of the agricultural development worker training series.…

  17. Illinois Community College Board Uniform Accounting Procedures Manual.

    ERIC Educational Resources Information Center

    Illinois Community Coll. Board, Springfield.

    This manual was designed to provide chief finance officers and other administrators with a summary of laws and policies that relate to Illinois public community colleges and to provide a uniform system for accounting, budgeting, auditing, and reporting in the state's community colleges. After chapter I describes the fiscal philosophies and…

  18. Engineman 3 & 2. Rate Training Manual and Nonresident Career Course.

    ERIC Educational Resources Information Center

    Thayer, C. B.; Farris, C. L.

    This Navy training and self-study manual is designed to provide a basic theoretical and practical understanding of primarily diesel engines and associated equipment, the main emphasis being on shipboard types and operations. Each chapter offers verbal and pictorial description of machinery, with both schematic and equipment-specific depiction of…

  19. Machinist's Mate 1 and C: Rate Training Manual.

    ERIC Educational Resources Information Center

    Naval Training Command, Pensacola, FL.

    The rate training manual covers the duties required to efficiently operate and maintain ship propulsion machinery and associated equipment and to maintain applicable records and reports. Chapters cover: turbines; reduction gears; steam-driven generators; heat exchangers and air ejectors; pumps; piping and valves; distilling plants; refrigeration…

  20. School Psychology. Pupil Personnel Services Recommended Practices and Procedures Manual.

    ERIC Educational Resources Information Center

    Batsche, George; McCoy, George

    This document, one of five volumes that compose the Pupil Personnel Services Recommended Practices and Procedures Manual, is designed for school counselors and psychologists and provides recommended practices and procedures to assist pupil personnel workers in better serving students in Illinois schools. Chapter 1 presents the philosophy of pupil…

  1. Child Neglect: A Guide for Intervention. The User Manual Series.

    ERIC Educational Resources Information Center

    Gaudin, James M., Jr.

    This manual provides a state-of-the art review of child neglect in the United States, its nature, causes, and the implications of that knowledge for preventive and remedial intervention. After an introduction, the first chapter considers the definition of neglect including types of neglect, the withholding of medically indicated treatment from…

  2. A Manual for Developing Successful Projects. Company School Collaboration.

    ERIC Educational Resources Information Center

    American Council of Life Insurance, Washington, DC.

    This manual is designed to help company officials who are responsible for planning, implementing, and coordinating company and school collaborative programs. Addressed in the individual chapters of the guide are the following topics: the benefits and principles of establishing company and school linkages; procedures for determining a company's…

  3. 7 CFR 300.4 - Reference Manual B.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ..., 2001, by the National Seed Health System (NSHS), has been approved for incorporation by reference in 7 CFR chapter III by the Director of the Office of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. (b) Availability. Copies of Reference Manual B: (1) Are available...

  4. 7 CFR 300.4 - Reference Manual B.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ..., 2001, by the National Seed Health System (NSHS), has been approved for incorporation by reference in 7 CFR chapter III by the Director of the Office of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. (b) Availability. Copies of Reference Manual B: (1) Are available...

  5. Aviation Electronics Technician 3 and 2. Rate Training Manual.

    ERIC Educational Resources Information Center

    Bureau of Naval Personnel, Washington, DC.

    The manual is designed as a self-study text for use by personnel of the Navy and Naval Reserve who are preparing to meet professional requirements for advancement in the rating of Aviation Electronics Technician. The document opens with a review of leadership and qualifications for the Aviation Electronics Technician rating. Other chapters cover…

  6. Instrumentman 1 and C. NAVTRA 10194-C. Rate Training Manual.

    ERIC Educational Resources Information Center

    Bureau of Naval Personnel, Washington, DC.

    A guide for advancement and training in the Instrumentman 1 and C ratings for Navy personnel is provided in this manual. The chapters outline the duties and responsibilities of the Instrumentmen involved with mechanical instrument repair and calibration shops, safety procedures, watch and clock repair and adjustments, electrical typewriters,…

  7. Storekeeper 1 and C: Rate Training Manual. Revised.

    ERIC Educational Resources Information Center

    Naval Education and Training Command, Pensacola, FL.

    The training manual is designed to help the trainee meet the occupational qualifications for performance of duties and for advancement to Storekeeper First Class (SKI) and Chief Storekeeper (SKC). Chapter one provides introductory information (requirements for advancement, sources of information, billets, customer relations, and rewards and…

  8. The Comprehensive Competencies Program Reference Manual. Volume I. Introduction.

    ERIC Educational Resources Information Center

    Taggart, Robert

    Chapter 1 of this reference manual is a summary of the comprehensive competencies program (CCP). It describes this system for organizing, implementing, managing, and efficiently delivering individualized self-paced instruction, combined with group and experience-based learning activities, using computer-assisted instruction. (The CCP covers not…

  9. "Unusually Successful": Pittsfield Chapter 1.

    ERIC Educational Resources Information Center

    Shiminski, James A.

    The United States Education Department recognizes projects that effectively meet the special needs of educationally deprived students. In 1992, the Pittsfield, Massachusetts, Chapter 1 preschool program earned national validation as an "unusually successful" compensatory education program. The program has served as a statewide model, and has…

  10. CSTEM User Manual

    NASA Technical Reports Server (NTRS)

    Hartle, M.; McKnight, R. L.

    2000-01-01

    This manual is a combination of a user manual, theory manual, and programmer manual. The reader is assumed to have some previous exposure to the finite element method. This manual is written with the idea that the CSTEM (Coupled Structural Thermal Electromagnetic-Computer Code) user needs to have a basic understanding of what the code is actually doing in order to properly use the code. For that reason, the underlying theory and methods used in the code are described to a basic level of detail. The manual gives an overview of the CSTEM code: how the code came into existence, a basic description of what the code does, and the order in which it happens (a flowchart). Appendices provide a listing and very brief description of every file used by the CSTEM code, including the type of file it is, what routine regularly accesses the file, and what routine opens the file, as well as special features included in CSTEM.

  11. Hanford Environmental Information System (HEIS). Volume 3, Subject Area reference manual

    SciTech Connect

    Schreck, R.I.

    1994-01-14

    The Hanford Environmental Information System (HEIS) Subject Area manuals are designed as reference guides, that is, each chapter provides the information needed to make best use of each subject area, its tables, and reporting capabilities. Each subject area is documented in a chapter in one of the subject area manuals. Because these are reference manuals, most of the information is also available in the online help system as well. See Section 5.4.2 of the HEIS User`s Guide (DOE-RL 1994a) for a detailed description of the online help.

  12. Industrial labor relations manual

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The NASA Industrial Labor Relations Manual provides internal guidelines and procedures to assist NASA Field Installations in dealing with contractor labor management disputes, Service Contract Act variance hearings, and to provide access of Labor Union Representatives to NASA for the purpose of maintaining schedules and goals in connection with vital NASA programs. This manual will be revised by page changes as revisions become necessary. Initial distribution of this manual has been made to NASA Headquarters and Field Installations.

  13. Instruct coders' manual

    NASA Technical Reports Server (NTRS)

    Friend, J.

    1971-01-01

    A manual designed both as an instructional manual for beginning coders and as a reference manual for the coding language INSTRUCT, is presented. The manual includes the major programs necessary to implement the teaching system and lists the limitation of current implementation. A detailed description is given of how to code a lesson, what buttons to push, and what utility programs to use. Suggestions for debugging coded lessons and the error messages that may be received during assembly or while running the lesson are given.

  14. EMSL Operations Manual

    SciTech Connect

    Foster, Nancy S.

    2009-06-18

    This manual is a general resource tool to assist EMSL users and Laboratory staff within EMSL locate official policy, practice and subject matter experts. It is not intended to replace or amend any formal Battelle policy or practice. Users of this manual should rely only on Battelle’s Standard Based Management System (SBMS) for official policy. No contractual commitment or right of any kind is created by this manual. Battelle management reserves the right to alter, change, or delete any information contained within this manual without prior notice.

  15. EMSL Operations Manual

    SciTech Connect

    Foster, Nancy S.

    2009-03-25

    This manual is a general resource tool to assist EMSL users and Laboratory staff within EMSL locate official policy, practice and subject matter experts. It is not intended to replace or amend any formal Battelle policy or practice. Users of this manual should rely only on Battelle’s Standard Based Management System (SBMS) for official policy. No contractual commitment or right of any kind is created by this manual. Battelle management reserves the right to alter, change, or delete any information contained within this manual without prior notice.

  16. Radiological Control Manual

    SciTech Connect

    Not Available

    1993-04-01

    This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records.

  17. Venus 3 Book: Chapter 1

    NASA Astrophysics Data System (ADS)

    Taylor, F.; Svedhem, H.; Head, J.

    2014-04-01

    This will be the first chapter in the planned 'Venus 3' book, which will present the latest knowledge about all aspects of the planet Venus. Chapter 1 will include: 1. Brief history of Venus observations, from telescopic studies up to and including early space missions (Venera, Mariner) 2. Overview of key results from more recent groundbased observations and space missions, including Pioneer Venus, the later Veneras, Vega, Magellan, Akatsuki and Venus Express 3. Summary of current knowledge, in three main sections: a. Surface and interior b. Atmosphere and climate c. Thermosphere, exosphere and magnetosphere 4. Outstanding scientific questions remaining, and future mission concepts providing background, introduction and an overview to the rest of the book.

  18. Pesticide Applicator Training Manual, Category 3 - Ornamentals and Turf for New York State. A Training Program for the Certification of Commercial Pesticide Applicators.

    ERIC Educational Resources Information Center

    Zuchorski, Edward, Jr., Ed.

    This manual provides information needed to meet specific standards for certification as a pesticide applicator. Each of the eight chapters deals with a different aspect of pesticide use. Chapter one discusses the problems of use as it relates to safety of humans and the environment. Chapter two is concerned with the identification and diagnosis of…

  19. School Fire Safety Manual.

    ERIC Educational Resources Information Center

    Arkansas State Dept. of Education, Little Rock. General Education Div.

    This manual provides the background information necessary for the planning of school fire safety programs by local school officials, particularly in Arkansas. The manual first discusses the need for such programs and cites the Arkansas state law regarding them. Policies established by the Arkansas State Board of Education to implement the legal…

  20. Manual for Refugee Sponsorship.

    ERIC Educational Resources Information Center

    Brewer, Kathleen; Taran, Patrick A.

    This manual provides guidelines for religious congregations interested in setting up programs to sponsor refugees. The manual describes the psychological implications of the refugee experience and discusses initial steps in organizing for sponsorship. Detailed information is provided for sponsors regarding: finances and mobilization of resources;…

  1. Technical Manual. The ACT®

    ERIC Educational Resources Information Center

    ACT, Inc., 2014

    2014-01-01

    This manual contains technical information about the ACT® college readiness assessment. The principal purpose of this manual is to document the technical characteristics of the ACT in light of its intended purposes. ACT regularly conducts research as part of the ongoing formative evaluation of its programs. The research is intended to ensure that…

  2. Quality Circle: Member Manual.

    ERIC Educational Resources Information Center

    Dewar, Donald L.

    This training manual provides information on the operation and function of "quality circles," a factory program introduced in Japan in which workers participate voluntarily in quality control and management decisions through various means of communication. Following an introduction, the manual presents a series of frequently asked questions about…

  3. School District Energy Manual.

    ERIC Educational Resources Information Center

    Association of School Business Officials International, Reston, VA.

    This manual serves as an energy conservation reference and management guide for school districts. The School District Energy Program (SDEP) is designed to provide information and/or assistance to school administrators planning to implement a comprehensive energy management program. The manual consists of 15 parts. Part 1 describes the SDEP; Parts…

  4. Dental Charting. Student's Manual.

    ERIC Educational Resources Information Center

    Weaver, Trudy Karlene; Apfel, Maura

    This manual is part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. This student manual contains four units covering the following topics: dental anatomical terminology; tooth numbering systems;…

  5. Indoor Air Quality Manual.

    ERIC Educational Resources Information Center

    Baldwin Union Free School District, NY.

    This manual identifies ways to improve a school's indoor air quality (IAQ) and discusses practical actions that can be carried out by school staff in managing air quality. The manual includes discussions of the many sources contributing to school indoor air pollution and the preventive planning for each including renovation and repair work,…

  6. Functional Handwriting Manual.

    ERIC Educational Resources Information Center

    Metzger, Louise; Lehotsky, Rutheda R.

    An inservice project to review the functional handwriting being taught in the Williamsport, Pennsylvania, school district produced a handwriting manual that provides teachers and students with models of letter forms and instructional exercises leading to the development of an individualized style of handwriting. The manual describes student…

  7. Circulation Aide Training Manual.

    ERIC Educational Resources Information Center

    Bergeson, Alan O.

    This training manual provides instruction on shelving and other duties for student assistants in the learning resources center at the College of Dupage, located in Illinois. It is noted that prospective student circulation aides are required to read the manual and pass a written test on policies and procedures before they are allowed to shelve…

  8. Home Maintenance Manual.

    ERIC Educational Resources Information Center

    Richmond, Jim; And Others

    This manual, written especially for the Navajo and Hopi Indian Relocation Commission, is a simply worded, step-by-step guide to home maintenance for new homeowners. It can be used for self-study or it can serve as instructional material for a training class on home ownership. The manual is organized in nine sections that cover the following…

  9. Materials inventory management manual

    NASA Technical Reports Server (NTRS)

    1992-01-01

    This NASA Materials Inventory Management Manual (NHB 4100.1) is issued pursuant to Section 203(c)(1) of the National Aeronautics and Space Act of 1958 (42 USC 2473). It sets forth policy, performance standards, and procedures governing the acquisition, management and use of materials. This Manual is effective upon receipt.

  10. Automatic Versus Manual Indexing

    ERIC Educational Resources Information Center

    Vander Meulen, W. A.; Janssen, P. J. F. C.

    1977-01-01

    A comparative evaluation of results in terms of recall and precision from queries submitted to systems with automatic and manual subject indexing. Differences were attributed to query formulation. The effectiveness of automatic indexing was found equivalent to manual indexing. (Author/KP)

  11. Biology Laboratory Safety Manual.

    ERIC Educational Resources Information Center

    Case, Christine L.

    The Centers for Disease Control (CDC) recommends that schools prepare or adapt a biosafety manual, and that instructors develop a list of safety procedures applicable to their own lab and distribute it to each student. In this way, safety issues will be brought to each student's attention. This document is an example of such a manual. It contains…

  12. Induction brazing manual

    NASA Technical Reports Server (NTRS)

    1971-01-01

    Manual presents standards and techniques which are known or are particular to specific industry, and is useful as guide in closing tolerance brazing. Material and equipment specifications, tool setting tables, and quality control data and instructions are included. Since similar standards are available, manual is supplementary reference.

  13. Interlibrary Loan Training Manual.

    ERIC Educational Resources Information Center

    Kaufman, David, Ed.

    This manual is designed to provide information to interlibrary loan (ILL) practitioners about the philosophy behind interlibrary loan, as well as a functional knowledge of its routines. The first part of the manual presents general and background material about interlibrary loans. Included in this section are a glossary of library terms, the…

  14. [Physiotherapy as manual therapy].

    PubMed

    Torstensen, T A; Nielsen, L L; Jensen, R; Reginiussen, T; Wiesener, T; Kirkesola, G; Mengshoel, A M

    1999-05-30

    Manual therapy includes methods where the therapist's hands are used to stretch, mobilize or manipulate the spinal column, paravertebral structures or extremity joints. The aims of these methods are to relieve pain and improve function. In Norway only specially qualified physiotherapists and chiropractors are authorized to perform manipulation of joints (high velocity thrust techniques). To become a qualified manual therapist in Norway one must have a minimum of two years of clinical practice as physiotherapist followed by two year full time postgraduate training in manual therapy (a total of six years). Historically the Norwegian manual therapy system was developed in the 1950s by physiotherapists and medical doctors in England (James Cyriax and James Mennell) and Norway. As a result doctors allowed physiotherapists to use manipulation as a treatment method of both spinal and peripheral joints. In 1957 the Norwegian health authorities introduced reimbursement for manual therapy performed by physiotherapists.

  15. Completing Invoices. Student's Manual and Instructor's Manual.

    ERIC Educational Resources Information Center

    Hamer, Jean

    Supporting performance objective 46 of the V-TECS (Vocational-Technical Education Consortium of States) Secretarial Catalog, both a set of student materials and an instructor's manual on completing invoices are included in this packet. (The packet is the fifth in a set of nine on performing computational clerical activities--CE 016 951-959.) The…

  16. Objectives and Overview. Chapter 1

    NASA Technical Reports Server (NTRS)

    Lamar, John E.; Hummel, Dietrich

    2009-01-01

    The RTO Task Group AVT-113 "Understanding and Modeling Vortical Flows to Improve the Technology Readiness Level for Military Aircraft" was established in April 2003. Two facets of the group, "Cranked Arrow Wing Aerodynamic Project International (CAWAPI)" and "Vortex Flow Experiment-2 (VFE-2)", worked closely together. However, because of the different requirements of each part, the CAWAPI facet concluded its work earlier (December 2006) than the VFE-2 facet (December 2007). In this first chapter of the Final Report of the Task Group an overview on its work is given, and the objectives for the Task Group are described.

  17. Chapter 3. Public health resources

    PubMed Central

    1973-01-01

    The resource requirements of the public health services are discussed in terms of their three main components: manpower, physical resources, and finances in relation to population. The observational data from the Republic of Korea provide an illustration of the problems of resource availability and utilization, with special reference to tuberculosis control. A calculation of resource and population constraints and estimates of the basic inputs required by tuberculosis control technology are presented. Data on the 1965 level of Korean health resources are given in the Annex to this chapter. PMID:20604424

  18. Earthquake ground motion: Chapter 3

    USGS Publications Warehouse

    Luco, Nicolas; Valley, Michael; Crouse, C.B.

    2012-01-01

    Most of the effort in seismic design of buildings and other structures is focused on structural design. This chapter addresses another key aspect of the design process—characterization of earthquake ground motion. Section 3.1 describes the basis of the earthquake ground motion maps in the Provisions and in ASCE 7. Section 3.2 has examples for the determination of ground motion parameters and spectra for use in design. Section 3.3 discusses and provides an example for the selection and scaling of ground motion records for use in response history analysis.

  19. 31 CFR Appendixes to Chapter V - Note

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Note Appendixes to Chapter V Money... CONTROL, DEPARTMENT OF THE TREASURY Ch. V, Nt. Appendixes to Chapter V—Note Notes: The alphabetical lists... blocked vessel in the underlying transaction. See § 501.604(b)(1) of this chapter. Financial...

  20. Fire Protection Program Manual

    SciTech Connect

    Sharry, J A

    2012-05-18

    This manual documents the Lawrence Livermore National Laboratory (LLNL) Fire Protection Program. Department of Energy (DOE) Orders 420.1B, Facility Safety, requires LLNL to have a comprehensive and effective fire protection program that protects LLNL personnel and property, the public and the environment. The manual provides LLNL and its facilities with general information and guidance for meeting DOE 420.1B requirements. The recommended readers for this manual are: fire protection officers, fire protection engineers, fire fighters, facility managers, directorage assurance managers, facility coordinators, and ES and H team members.

  1. Salinas : theory manual.

    SciTech Connect

    Walsh, Timothy Francis; Reese, Garth M.; Bhardwaj, Manoj Kumar

    2004-08-01

    This manual describes the theory behind many of the constructs in Salinas. For a more detailed description of how to use Salinas , we refer the reader to Salinas, User's Notes. Many of the constructs in Salinas are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Salinas are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programer-notes manual, the user's notes and of course the material in the open literature.

  2. Chapter 1 and Chapter 1 Migrant. Evaluation Findings, 1990-91. Executive Summary.

    ERIC Educational Resources Information Center

    Christner, Catherine; And Others

    This report describes an evaluation of the Austin (Texas) Independent School District's (AISD) Chapter 1 and Chapter 1 Migrant programs. Chapter 1 is a federally funded compensatory educational program that provided funding in 1990-91 to 25 AISD elementary schools with high concentrations of low-income students. Chapter 1 Migrant is also a…

  3. Secondary School Mathematics, Chapter 21, Rigid Motions and Vectors, Chapter 22, Computer and Programs. Teacher's Commentary.

    ERIC Educational Resources Information Center

    Stanford Univ., CA. School Mathematics Study Group.

    The teacher's guide for the eleventh unit in this SMSG series covers the chapter on rigid motions and vectors and the chapter on computers and programs. The overall purpose for each of the chapters is described, the prerequisite knowledge needed by students is specified, the mathematical development of each chapter is detailed, behavioral…

  4. FDAS EPROM programming manual

    SciTech Connect

    Baker, J.

    1982-07-01

    This brief manual is intended as a guide for producing programmed Erasable-Programmable-Read-Only-Memories (EPROMs) for the microprocessor-based data acquisition system. Also included is a section on verifying the EPROMs in an FDAS unit.

  5. Geochemical engineering reference manual

    SciTech Connect

    Owen, L.B.; Michels, D.E.

    1984-01-01

    The following topics are included in this manual: physical and chemical properties of geothermal brine and steam, scale and solids control, processing spent brine for reinjection, control of noncondensable gas emissions, and goethermal mineral recovery. (MHR)

  6. Interactive Office user's manual

    NASA Technical Reports Server (NTRS)

    Montgomery, Edward E.; Lowers, Benjamin; Nabors, Terri L.

    1990-01-01

    Given here is a user's manual for Interactive Office (IO), an executive office tool for organization and planning, written specifically for Macintosh. IO is a paperless management tool to automate a related group of individuals into one productive system.

  7. Manual of diagnostic imaging

    SciTech Connect

    Gaylord, G.; Baker, S.; Davis, L.

    1988-01-01

    This book is on ordering and understanding the results of radiologic studies. Main sections are (I) Diagnostic Radiology serves as a basic introduction; (II) Diagnostic Modalities dedicates a chapter to each imaging modality in a clinical context, with a brief technical description and patient preparation guidelines; and (III) Organ System Imaging contains a chapter on each major organ system, covering the abilities and limitations of each modality to image a specific organ system and the significance of anatomic, physiologic, and general pathologic information.

  8. Pesticide Applicator Training Manual, Category 1 - Agricultural, Subcategory - Animal. A Training Program for the Certification of Commercial Pesticide Applicators.

    ERIC Educational Resources Information Center

    Pendleton, R. F., Ed.; Schmidtmann, E. T., Ed.

    This manual provides information needed to meet specific standards for certification as a pesticide applicator. Chapter one deals with the safety problems of pesticide use to humans, livestock and the environment. The second chapter is concerned with the types of application equipment and their utilization. Specific pests of livestock and poultry…

  9. Self-Help Construction of 1-Story Buildings. Appropriate Technologies for Development. Program & Training Journal Manual Series, Number 6.

    ERIC Educational Resources Information Center

    Gallant, Peter

    This manual is designed to assist Peace Corps field workers who have little or no construction experience in helping communities or families to construct one-story buildings. Discussed in a chapter on basic planning and design are site and position; size, shape, and floor plan; and construction materials. The next chapter is a detailed examination…

  10. Aviation Boatswain's Mate H 1 and C: Naval Rate Training Manual and Nonresident Career Course. 1975 Edition.

    ERIC Educational Resources Information Center

    Naval Education and Training Command, Pensacola, FL.

    The Rate Training Manual is one of a series of training manuals prepared for enlisted personnel of the Navy and Naval Reserve designed to aid Aviation Boatswain's Mate H 2 in preparing for advancement to ABH1 and the ABH1 in preparing for advancement to the rank of ABHC. Chapter 1 discusses the enlisted rating structure, the ABH service ratings,…

  11. Court-Mandated Counseling for Men Who Batter: A Three-Day Workshop for Mental Health Professionals. Participant's Manual.

    ERIC Educational Resources Information Center

    Ganley, Anne L.

    The purpose of this manual is to provide a written tool for those participating in a 3-day workshop designed to train mental health professionals from diverse settings and communities to counsel court-mandated batterers. The manual consists of: (1) an outline of the workshop; (2) an introduction; (3) six chapters/sections; (4) notes; and (5) three…

  12. Accounting for the Microbusiness: A Teaching Manual. A Handbook for Volunteers. Appropriate Technologies for Development. Reprint R-23B.

    ERIC Educational Resources Information Center

    Ronan, Michael W.; Noronha, Augusto A.

    This manual is designed as a tool for development workers to use in teaching the MICRON accounting system to persons in developing areas. (Developed by a Peace Corps volunteer in Colombia, MICRON is a simplified accounting system that is intended for use in small businesses.) The first chapter of the manual is devoted to an overview of the nature…

  13. Beyond Chapter 4.7.

    PubMed

    Bandler, Lilon Gretl

    2015-12-01

    Chapter 4.7 of the National Statement on Ethical Conduct in Human Research refers specifically to Aboriginal and Torres Strait Islander Peoples. It lays out the points at which researchers working with Aboriginal and Torres Strait Islanders must consider their approach, and the engagement with individuals, communities or groups who are involved in or affected by their research. History, of Australia and of research involving Aboriginal and Torres Strait Islander Australians, has informed this approach. The response to that history has been a rational, institutionalised, systematic demand for a different perception of what should direct research and research processes to ensure engagement with and service to the community with whom the researchers wish to do the work. This paper considers whether these principles could inform the approach to other research work. PMID:27135116

  14. Chapter 14: Cancer Genome Analysis

    PubMed Central

    Vazquez, Miguel; de la Torre, Victor; Valencia, Alfonso

    2012-01-01

    Although there is great promise in the benefits to be obtained by analyzing cancer genomes, numerous challenges hinder different stages of the process, from the problem of sample preparation and the validation of the experimental techniques, to the interpretation of the results. This chapter specifically focuses on the technical issues associated with the bioinformatics analysis of cancer genome data. The main issues addressed are the use of database and software resources, the use of analysis workflows and the presentation of clinically relevant action items. We attempt to aid new developers in the field by describing the different stages of analysis and discussing current approaches, as well as by providing practical advice on how to access and use resources, and how to implement recommendations. Real cases from cancer genome projects are used as examples. PMID:23300415

  15. Defining groundwater age: Chapter 3

    USGS Publications Warehouse

    Torgersen, T.; Purtschert, R.; Phillips, F.M.; Plummer, L.N.; Sanford, W.E.; Suckow, A.

    2013-01-01

    This book investigates applications of selected chemical and isotopic substances that can be used to recognize and interpret age information pertaining to ‘old’ groundwater (defined as water that was recharged on a timescale from approximately 1000 to more than 1 000 000 a). However, as discussed below, only estimates of the ‘age’ of water extracted from wells can be inferred. These groundwater age estimates are interpreted from measured concentrations of chemical and isotopic substances in the groundwater. Even then, there are many complicating factors, as discussed in this book. In spite of these limitations, much can be learned about the physics of groundwater flow and about the temporal aspects of groundwater systems from age interpretations of measured concentrations of environmental tracers in groundwater systems. This chapter puts the concept of ‘age’ into context, including its meaning and interpretation, and attempts to provide a unifying usage for the rest of the book.

  16. Beyond Chapter 4.7.

    PubMed

    Bandler, Lilon Gretl

    2015-12-01

    Chapter 4.7 of the National Statement on Ethical Conduct in Human Research refers specifically to Aboriginal and Torres Strait Islander Peoples. It lays out the points at which researchers working with Aboriginal and Torres Strait Islanders must consider their approach, and the engagement with individuals, communities or groups who are involved in or affected by their research. History, of Australia and of research involving Aboriginal and Torres Strait Islander Australians, has informed this approach. The response to that history has been a rational, institutionalised, systematic demand for a different perception of what should direct research and research processes to ensure engagement with and service to the community with whom the researchers wish to do the work. This paper considers whether these principles could inform the approach to other research work.

  17. Conclusions and Recommendations. Chapter 37

    NASA Technical Reports Server (NTRS)

    Lamar, John E.; Hummel, Dietrich

    2009-01-01

    This chapter provides a brief wrap-up of the task group report and focuses on the overall conclusions and recommendations for future work for the CAWAPI and VFE-2 facets beyond the task group. The overall conclusion is that the Technology Readiness Level (TRL) of CFD solvers has been improved in predicting the flow-physics of vortex-dominated flows during the work of the task group, by having flight and wind-tunnel data available for comparison. Moreover, like all good scientific studies, this task group has identified flight conditions on the F-16XL airplane or wind-tunnel test conditions for a specific leading-edge radius on the 65 delta-wing model where the TRL still needs to be increased.

  18. Hanford whole body counting manual

    SciTech Connect

    Palmer, H.E.; Rieksts, G.A.; Lynch, T.P.

    1990-06-01

    This document describes the Hanford Whole Body Counting Program as it is administered by Pacific Northwest Laboratory (PNL) in support of the US Department of Energy--Richland Operations Office (DOE-RL) and its Hanford contractors. Program services include providing in vivo measurements of internally deposited radioactivity in Hanford employees (or visitors). Specific chapters of this manual deal with the following subjects: program operational charter, authority, administration, and practices, including interpreting applicable DOE Orders, regulations, and guidance into criteria for in vivo measurement frequency, etc., for the plant-wide whole body counting services; state-of-the-art facilities and equipment used to provide the best in vivo measurement results possible for the approximately 11,000 measurements made annually; procedures for performing the various in vivo measurements at the Whole Body Counter (WBC) and related facilities including whole body counts; operation and maintenance of counting equipment, quality assurance provisions of the program, WBC data processing functions, statistical aspects of in vivo measurements, and whole body counting records and associated guidance documents. 16 refs., 48 figs., 22 tabs.

  19. Chapter 4: Geological Carbon Sequestration

    SciTech Connect

    Friedmann, J; Herzog, H

    2006-06-14

    Carbon sequestration is the long term isolation of carbon dioxide from the atmosphere through physical, chemical, biological, or engineered processes. The largest potential reservoirs for storing carbon are the deep oceans and geological reservoirs in the earth's upper crust. This chapter focuses on geological sequestration because it appears to be the most promising large-scale approach for the 2050 timeframe. It does not discuss ocean or terrestrial sequestration. In order to achieve substantial GHG reductions, geological storage needs to be deployed at a large scale. For example, 1 Gt C/yr (3.6 Gt CO{sub 2}/yr) abatement, requires carbon capture and storage (CCS) from 600 large pulverized coal plants ({approx}1000 MW each) or 3600 injection projects at the scale of Statoil's Sleipner project. At present, global carbon emissions from coal approximate 2.5 Gt C. However, given reasonable economic and demand growth projections in a business-as-usual context, global coal emissions could account for 9 Gt C. These volumes highlight the need to develop rapidly an understanding of typical crustal response to such large projects, and the magnitude of the effort prompts certain concerns regarding implementation, efficiency, and risk of the enterprise. The key questions of subsurface engineering and surface safety associated with carbon sequestration are: (1) Subsurface issues: (a) Is there enough capacity to store CO{sub 2} where needed? (b) Do we understand storage mechanisms well enough? (c) Could we establish a process to certify injection sites with our current level of understanding? (d) Once injected, can we monitor and verify the movement of subsurface CO{sub 2}? (2) Near surface issues: (a) How might the siting of new coal plants be influenced by the distribution of storage sites? (b) What is the probability of CO{sub 2} escaping from injection sites? What are the attendant risks? Can we detect leakage if it occurs? (3) Will surface leakage negate or reduce the

  20. Radmodl Modeling Manual

    SciTech Connect

    Murphy, S.L.; Stevens, K.A.; Weister, T.E.

    1993-04-01

    RADMODL is a set of computer codes that model the transport of material through a network of interconnected compartments. This version of RADMODL is designed to model the transport of radioactive material from either a loss of coolant accident (LOCA) or a fuel handling accident into a set of interconnected compartments and determine the equivalent dose each compartment will see for the duration of the accident. The code is flexible enough to allow modeling of other types of materials and their dilution/dispersion during transport by designing a new set of input files corresponding to the facility layout and the dilution/dispersion factors. This report documents the issuance of the Modeling Manual, originally developed by EGS Corporation and ISSI as volume 1 of the Programmer`s Manual, with the incorporation of minor editorial comments. Though a Modeling Manual in itself is not required for the RADMODL code certification, this manual does contain information that is required for the one of the requirements for code User`s Manual and hence certification.

  1. Defense reutilization and marketing manual. Change 95-07

    SciTech Connect

    1995-05-18

    This numbered letter is directive in nature and expires 1 year from the date of this letter unless sooner superseded or rescinded. The purpose of this numbered letter is to incorporate new policy into the Defense Reutilization and Marketing Manual, DoD 4160.21-M, Chapter VIII. Pending accomplishment of a formal publication, insert the following as paragraph B76 (currently in a reserved status): 76. Pentachlorophenol (PCP) treated wood products.

  2. Sediment transport measurements: Chapter 5

    USGS Publications Warehouse

    Diplas, P.; Kuhnle, R.; Gray, J.; Glysson, D.; Edwards, T.; García, Marcelo H.

    2008-01-01

    Sediment erosion, transport, and deposition in fluvial systems are complex processes that are treated in detail in other sections of this book. Development of methods suitable for the collection of data that contribute to understanding these processes is a still-evolving science. Sediment and ancillary data are fundamental requirements for the proper management of river systems, including the design of structures, the determination of aspects of stream behavior, ascertaining the probable effect of removing an existing structure, estimation of bulk erosion, transport, and sediment delivery to the oceans, ascertaining the long-term usefulness of reservoirs and other public works, tracking movement of solid-phase contaminants, restoration of degraded or otherwise modified streams, and assistance in the calibration and validation of numerical models. This chapter presents techniques for measuring bed-material properties and suspended and bed-load discharges. Well-established and relatively recent, yet adequately tested, sampling equipment and methodologies, with designs that are guided by sound physical and statistical principles, are described. Where appropriate, the theory behind the development of the equipment and guidelines for its use are presented.

  3. Actively Controlled Components. Chapter 2

    NASA Technical Reports Server (NTRS)

    Horn, W.; Hiller, S.-J.; Pfoertner, H.; Schadow, K.; Rosenfeld, T.; Garg, S.

    2009-01-01

    Active Control can help to meet future engine requirements by an active improvement of the component characteristics. The concept is based on an intelligent control logic, which senses actual operating conditions and reacts with adequate actuator action. This approach can directly improve engine characteristics as performance, operability, durability and emissions on the one hand. On the other hand active control addresses the design constrains imposed by unsteady phenomena like inlet distortion, compressor surge, combustion instability, flow separations, vibration and noise, which only occur during exceptional operating conditions. The feasibility and effectiveness of active control technologies have been demonstrated in lab-scale tests. This chapter describes a broad range of promising applications for each engine component. Significant efforts in research and development remain to implement these technologies in engine rig and finally production engines and to demonstrate today s engine generation airworthiness, safety, reliability, and durability requirements. Active control applications are in particular limited by the gap between available and advanced sensors and actuators, which allow an operation in the harsh environment in an aero engine. The operating and performance requirements for actuators and sensors are outlined for each of the gas turbine sections from inlet to nozzle.

  4. Chapter 12: Human microbiome analysis.

    PubMed

    Morgan, Xochitl C; Huttenhower, Curtis

    2012-01-01

    Humans are essentially sterile during gestation, but during and after birth, every body surface, including the skin, mouth, and gut, becomes host to an enormous variety of microbes, bacterial, archaeal, fungal, and viral. Under normal circumstances, these microbes help us to digest our food and to maintain our immune systems, but dysfunction of the human microbiota has been linked to conditions ranging from inflammatory bowel disease to antibiotic-resistant infections. Modern high-throughput sequencing and bioinformatic tools provide a powerful means of understanding the contribution of the human microbiome to health and its potential as a target for therapeutic interventions. This chapter will first discuss the historical origins of microbiome studies and methods for determining the ecological diversity of a microbial community. Next, it will introduce shotgun sequencing technologies such as metagenomics and metatranscriptomics, the computational challenges and methods associated with these data, and how they enable microbiome analysis. Finally, it will conclude with examples of the functional genomics of the human microbiome and its influences upon health and disease.

  5. VUV thin films, chapter 7

    NASA Technical Reports Server (NTRS)

    Zukic, Muamer; Torr, Douglas G.

    1993-01-01

    The application of thin film technology to the vacuum ultraviolet (VUV) wavelength region from 120 nm to 230 nm has not been fully exploited in the past because of absorption effects which complicate the accurate determination of the optical functions of dielectric materials. The problem therefore reduces to that of determining the real and imaginary parts of a complex optical function, namely the frequency dependent refractive index n and extinction coefficient k. We discuss techniques for the inverse retrieval of n and k for dielectric materials at VUV wavelengths from measurements of their reflectance and transmittance. Suitable substrate and film materials are identified for application in the VUV. Such applications include coatings for the fabrication of narrow and broadband filters and beamsplitters. The availability of such devices open the VUV regime to high resolution photometry, interferometry and polarimetry both for space based and laboratory applications. This chapter deals with the optics of absorbing multilayers, the determination of the optical functions for several useful materials, and the design of VUV multilayer stacks as applied to the design of narrow and broadband reflection and transmission filters and beamsplitters. Experimental techniques are discussed briefly, and several examples of the optical functions derived for selected materials are presented.

  6. Chapter 12: Human Microbiome Analysis

    PubMed Central

    Morgan, Xochitl C.; Huttenhower, Curtis

    2012-01-01

    Humans are essentially sterile during gestation, but during and after birth, every body surface, including the skin, mouth, and gut, becomes host to an enormous variety of microbes, bacterial, archaeal, fungal, and viral. Under normal circumstances, these microbes help us to digest our food and to maintain our immune systems, but dysfunction of the human microbiota has been linked to conditions ranging from inflammatory bowel disease to antibiotic-resistant infections. Modern high-throughput sequencing and bioinformatic tools provide a powerful means of understanding the contribution of the human microbiome to health and its potential as a target for therapeutic interventions. This chapter will first discuss the historical origins of microbiome studies and methods for determining the ecological diversity of a microbial community. Next, it will introduce shotgun sequencing technologies such as metagenomics and metatranscriptomics, the computational challenges and methods associated with these data, and how they enable microbiome analysis. Finally, it will conclude with examples of the functional genomics of the human microbiome and its influences upon health and disease. PMID:23300406

  7. Measuring suspended sediment: Chapter 10

    USGS Publications Warehouse

    Gray, J.R.; Landers, M.N.

    2013-01-01

    Suspended sediment in streams and rivers can be measured using traditional instruments and techniques and (or) surrogate technologies. The former, as described herein, consists primarily of both manually deployed isokinetic samplers and their deployment protocols developed by the Federal Interagency Sedimentation Project. They are used on all continents other than Antarctica. The reliability of the typically spatially rich but temporally sparse data produced by traditional means is supported by a broad base of scientific literature since 1940. However, the suspended sediment surrogate technologies described herein – based on hydroacoustic, nephelometric, laser, and pressure difference principles – tend to produce temporally rich but in some cases spatially sparse datasets. The value of temporally rich data in the accuracy of continuous sediment-discharge records is hard to overstate, in part because such data can often overcome the shortcomings of poor spatial coverage. Coupled with calibration data produced by traditional means, surrogate technologies show considerable promise toward providing the fluvial sediment data needed to increase and bring more consistency to sediment-discharge measurements worldwide.

  8. Salinas : theory manual.

    SciTech Connect

    Walsh, Timothy Francis; Reese, Garth M.; Bhardwaj, Manoj Kumar

    2011-11-01

    Salinas provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of structural systems. This manual describes the theory behind many of the constructs in Salinas. For a more detailed description of how to use Salinas, we refer the reader to Salinas, User's Notes. Many of the constructs in Salinas are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Salinas are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programmer notes manual, the user's notes and of course the material in the open literature.

  9. Aircraft operations management manual

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The NASA aircraft operations program is a multifaceted, highly diverse entity that directly supports the agency mission in aeronautical research and development, space science and applications, space flight, astronaut readiness training, and related activities through research and development, program support, and mission management aircraft operations flights. Users of the program are interagency, inter-government, international, and the business community. This manual provides guidelines to establish policy for the management of NASA aircraft resources, aircraft operations, and related matters. This policy is an integral part of and must be followed when establishing field installation policy and procedures covering the management of NASA aircraft operations. Each operating location will develop appropriate local procedures that conform with the requirements of this handbook. This manual should be used in conjunction with other governing instructions, handbooks, and manuals.

  10. Developing a policy manual.

    PubMed

    Hotta, Tracey A

    2013-01-01

    Do you really need to have a policy and procedure in the office? Frequently they are seen sitting on the shelf, collecting dust. The answer is yes for a number of very important reasons. A policy and procedure manual is a tool to set guidelines and expectations on the basis of the mission and vision of the office. A well-written manual is a powerful training tool for new staff so they can get a feel for the office culture. Furthermore, it is a provincial or state legislative requirement that can reduce management's concern about potential legal issues or problems. If an office does not have a manual to set guidelines, the employees may be forced to make their own decisions to solve problems, which can often result in confusion, inconsistencies, and mistakes. PMID:23446507

  11. ARMP-02 documentation: Part 2, Chapter 7, MICBURN-E computer code manual: Volume 1, Theory and numerics manual

    SciTech Connect

    Jones, D.B.

    1986-12-01

    MICBURN-E is a multigroup pin cell lattice physics computer code designed for the burnup analysis of light water reactor fuel rods. It was specifically developed to handle fuel rods containing an initially homogeneous mixture of fuel (UO/sub 2/) and burnable absorber (Gd/sub 2/O/sub 3/) compositions. MICBURN-E features a fine mesh geometry model which makes it particularly suitable for the analysis of fuel rods which burn according to the phenomenon for ''onion-skin'' depletion effects. MICBURN-E employs integral transport theory based upon the method of collision probabilities to calculate neutron flux distributions and eigenvalues for cylindrical geometries. The primary application of MICBURN-E is to generate a burnable absorber data file containing effective microscopic absorption cross sections as a function of burnup for a pseudo nuclide. This file is then supplied as input to various assembly lattice physics codes including CPM-2, EPRI-CPM and CASMO-1. MICBURN-E is written entirely in FORTRAN and is supplied with a Nuclear Data Library which contains basic microscopic cross sections and burnup parameters for several nuclides.

  12. ARMP-02 documentation: Part 2, Chapter 7, MICBURN-E computer code manual: Volume 2, User's manual

    SciTech Connect

    Jones, D.B.

    1986-12-01

    MICBURN-E is a multigroup pin cell lattice physics computer code designed for the burnup analysis of light water reactor fuel rods. It was specifically developed to handle fuel rods containing an initially homogeneous mixture of fuel (UO/sub 2/) and burnable absorber (Gd/sub 2/O/sub 3/) compositions. MICBURN-E features a fine mesh geometry model which makes it particularly suitable for the analysis of fuel rods which burn according to the phenomenon for ''onion-skin'' depletion effects. MICBURN-E employs integral transport theory based upon the method of collision probabilities to calculate neutron flux distributions and eigenvalues for cylindrical geometries. The primary application of MICBURN-E is to generate a burnable absorber data file containing effective microscopic absorption cross sections as a function of burnup for a pseudo nuclide. This file is then supplied as input to various assembly lattice physics codes including CPM-2, EPRI-CPM and CASM0-1. MICBURN-E is written entirely in FORTRAN and is supplied with a Nuclear Data Library which contains basic microscopic cross sections and burnup parameters for several nuclides.

  13. ARMP-02 documentation: Part 2, Chapter 7, MICBURN-E computer code manual: Volume 3, Programmer's manual

    SciTech Connect

    Jones, D.B.

    1986-12-01

    MICBURN-E is a multigroup pin cell lattice physics computer code designed for the burnup analysis of light water reactor fuel rods. It was specifically developed to handle fuel rods containing an initially homogeneous mixture of fuel (UO/sub 2/) and burnable absorber (Gd/sub 2/O/sub 3/) compositions. MICBURN-E features a fine mesh geometry model which makes it particularly suitable for the analysis of fuel rods which burn according to the phenomenon for ''onion-skin'' depletion effects. MICBURN-E employs integral transport theory based upon the method of collision probabilities to calculate neutron flux distributions and eigenvalues for cylindrical geometries. The primary application of MICBURN-E is to generate a burnable absorber data file containing effective microscopic absorption cross sections as a function of burnup for a pseudo nuclide. This file is then supplied as input to various assembly lattice physics codes including CPM-2, EPRI-CPM and CASMO-1. MICBURN-E is written entirely in FORTRAN and is supplied with a Nuclear Data Library which contains basic microscopic cross sections and burnup parameters for several nuclides.

  14. Manuals of Cultural Systems

    NASA Astrophysics Data System (ADS)

    Ballonoff, Paul

    2014-10-01

    Ethnography often studies social networks including empirical descriptions of marriages and families. We initially concentrate on a special subset of networks which we call configurations. We show that descriptions of the possible outcomes of viable histories form a manual, and an orthoalgebra. We then study cases where family sizes vary, and show that this also forms a manual. In fact, it demonstrates adiabatic invariance, a property often associated with physical system conservation laws, and which here expresses conservation of the viability of a cultural system.

  15. Quality Assurance Manual

    SciTech Connect

    McGarrah, J.E.

    1995-05-01

    In order to provide clients with quality products and services, Pacific Northwest Laboratory (PNL) has established and implemented a formal quality assurance program. These management controls are documented in this manual (PNL-MA-70) and its accompanying standards and procedures. The QA Program meets the basic requirements and supplements of ANSI/ASME NQA-1, Quality Assurance Program Requirements for Nuclear Facilities, as interpreted for PNL activities. Additional, the quality requirements are augmented to include the Total Quality approach defined in the Department of Energy Order 5700.6C, Quality Assurance. This manual provides requirements and an overview of the administrative procedures that apply to projects and activities.

  16. AIS training manual

    SciTech Connect

    Kramer, C.F.; Barancik, J.I.

    1989-05-01

    This Training Manual was developed by the Injury Prevention and Analysis Group (IPAG) as part of a training program in AIS 85 and AIS-EM (Epidemiological Modifications) coding. The IPAG Program is designed primarily to train medical record and other health professionals from diverse backgrounds and experience levels in the use of AIS 85 and AIS 85-EM. The Manual is designed to be used as a reference text after completion of the Program and includes copies of visual projection materials used during the training sessions.

  17. Fastener Design Manual

    NASA Technical Reports Server (NTRS)

    Barrett, Richard T.

    1990-01-01

    This manual was written for design engineers to enable them to choose appropriate fasteners for their designs. Subject matter includes fastener material selection, platings, lubricants, corrosion, locking methods, washers, inserts, thread types and classes, fatigue loading, and fastener torque. A section on design criteria covers the derivation of torque formulas, loads on a fastener group, combining simultaneous shear and tension loads, pullout load for tapped holes, grip length, head styles, and fastener strengths. The second half of this manual presents general guidelines and selection criteria for rivets and lockbolts.

  18. Equipment Management Manual

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The NASA Equipment Management Manual (NHB 4200.1) is issued pursuant to Section 203(c)(1) of the National Aeronautics and Space Act of 1958, as amended (42 USC 2473), and sets forth policy, uniform performance standards, and procedural guidance to NASA personnel for the acquisition, management, and use of NASA-owned equipment. This revision is effective upon receipt. This is a controlled manual, issued in loose-leaf form, and revised through page changes. Additional copies for internal use may be obtained through normal distribution.

  19. Chapter 1: Biomedical knowledge integration.

    PubMed

    Payne, Philip R O

    2012-01-01

    The modern biomedical research and healthcare delivery domains have seen an unparalleled increase in the rate of innovation and novel technologies over the past several decades. Catalyzed by paradigm-shifting public and private programs focusing upon the formation and delivery of genomic and personalized medicine, the need for high-throughput and integrative approaches to the collection, management, and analysis of heterogeneous data sets has become imperative. This need is particularly pressing in the translational bioinformatics domain, where many fundamental research questions require the integration of large scale, multi-dimensional clinical phenotype and bio-molecular data sets. Modern biomedical informatics theory and practice has demonstrated the distinct benefits associated with the use of knowledge-based systems in such contexts. A knowledge-based system can be defined as an intelligent agent that employs a computationally tractable knowledge base or repository in order to reason upon data in a targeted domain and reproduce expert performance relative to such reasoning operations. The ultimate goal of the design and use of such agents is to increase the reproducibility, scalability, and accessibility of complex reasoning tasks. Examples of the application of knowledge-based systems in biomedicine span a broad spectrum, from the execution of clinical decision support, to epidemiologic surveillance of public data sets for the purposes of detecting emerging infectious diseases, to the discovery of novel hypotheses in large-scale research data sets. In this chapter, we will review the basic theoretical frameworks that define core knowledge types and reasoning operations with particular emphasis on the applicability of such conceptual models within the biomedical domain, and then go on to introduce a number of prototypical data integration requirements and patterns relevant to the conduct of translational bioinformatics that can be addressed via the design and

  20. Volcanism on Mars. Chapter 41

    NASA Technical Reports Server (NTRS)

    Zimbelman, J. R.; Garry, W. B.; Bleacher, J. E.; Crown, D. A.

    2015-01-01

    Spacecraft exploration has revealed abundant evidence that Mars possesses some of the most dramatic volcanic landforms found anywhere within the solar system. How did a planet half the size of Earth produce volcanoes like Olympus Mons, which is several times the size of the largest volcanoes on Earth? This question is an example of the kinds of issues currently being investigated as part of the space-age scientific endeavor called "comparative planetology." This chapter summarizes the basic information currently known about volcanism on Mars. The volcanoes on Mars appear to be broadly similar in overall morphology (although, often quite different in scale) to volcanic features on Earth, which suggests that Martian eruptive processes are not significantly different from the volcanic styles and processes on Earth. Martian volcanoes are found on terrains of different age, and Martian volcanic rocks are estimated to comprise more than 50% of the Martian surface. This is in contrast to volcanism on smaller bodies such as Earth's Moon, where volcanic activity was mainly confined to the first half of lunar history (see "Volcanism on the Moon"). Comparative planetology supports the concept that volcanism is the primary mechanism for a planetary body to get rid of its internal heat; smaller bodies tend to lose their internal heat more rapidly than larger bodies (although, Jupiter's moon Io appears to contradict this trend; Io's intense volcanic activity is powered by unique gravitational tidal forces within the Jovian system; see "Volcanism on Io"), so that volcanic activity on Mars would be expected to differ considerably from that found on Earth and the Moon.

  1. Chapter 1: Biomedical knowledge integration.

    PubMed

    Payne, Philip R O

    2012-01-01

    The modern biomedical research and healthcare delivery domains have seen an unparalleled increase in the rate of innovation and novel technologies over the past several decades. Catalyzed by paradigm-shifting public and private programs focusing upon the formation and delivery of genomic and personalized medicine, the need for high-throughput and integrative approaches to the collection, management, and analysis of heterogeneous data sets has become imperative. This need is particularly pressing in the translational bioinformatics domain, where many fundamental research questions require the integration of large scale, multi-dimensional clinical phenotype and bio-molecular data sets. Modern biomedical informatics theory and practice has demonstrated the distinct benefits associated with the use of knowledge-based systems in such contexts. A knowledge-based system can be defined as an intelligent agent that employs a computationally tractable knowledge base or repository in order to reason upon data in a targeted domain and reproduce expert performance relative to such reasoning operations. The ultimate goal of the design and use of such agents is to increase the reproducibility, scalability, and accessibility of complex reasoning tasks. Examples of the application of knowledge-based systems in biomedicine span a broad spectrum, from the execution of clinical decision support, to epidemiologic surveillance of public data sets for the purposes of detecting emerging infectious diseases, to the discovery of novel hypotheses in large-scale research data sets. In this chapter, we will review the basic theoretical frameworks that define core knowledge types and reasoning operations with particular emphasis on the applicability of such conceptual models within the biomedical domain, and then go on to introduce a number of prototypical data integration requirements and patterns relevant to the conduct of translational bioinformatics that can be addressed via the design and

  2. Chapter 1: Biomedical Knowledge Integration

    PubMed Central

    Payne, Philip R. O.

    2012-01-01

    The modern biomedical research and healthcare delivery domains have seen an unparalleled increase in the rate of innovation and novel technologies over the past several decades. Catalyzed by paradigm-shifting public and private programs focusing upon the formation and delivery of genomic and personalized medicine, the need for high-throughput and integrative approaches to the collection, management, and analysis of heterogeneous data sets has become imperative. This need is particularly pressing in the translational bioinformatics domain, where many fundamental research questions require the integration of large scale, multi-dimensional clinical phenotype and bio-molecular data sets. Modern biomedical informatics theory and practice has demonstrated the distinct benefits associated with the use of knowledge-based systems in such contexts. A knowledge-based system can be defined as an intelligent agent that employs a computationally tractable knowledge base or repository in order to reason upon data in a targeted domain and reproduce expert performance relative to such reasoning operations. The ultimate goal of the design and use of such agents is to increase the reproducibility, scalability, and accessibility of complex reasoning tasks. Examples of the application of knowledge-based systems in biomedicine span a broad spectrum, from the execution of clinical decision support, to epidemiologic surveillance of public data sets for the purposes of detecting emerging infectious diseases, to the discovery of novel hypotheses in large-scale research data sets. In this chapter, we will review the basic theoretical frameworks that define core knowledge types and reasoning operations with particular emphasis on the applicability of such conceptual models within the biomedical domain, and then go on to introduce a number of prototypical data integration requirements and patterns relevant to the conduct of translational bioinformatics that can be addressed via the design and

  3. FDA (food and drug administration) compliance program guidance manual (fy 84). Section 6. Radiological health

    SciTech Connect

    Not Available

    1983-10-01

    The FDA Compliance Program Guidance Manual provides a system for issuing and filing written program plans and instructions directed to Food and Drug Administration Field operations for project implementation. Section VI provides those chapters of the Compliance Program Guidance Manual which pertain to the area of radiological health. Some of the areas of coverage include laser standards; compliance testing of x-ray equipment, ultrasonic therapy devices, mercury vapor lamps, television receivers, and microwave ovens; radiation policy; and imported electronic products.

  4. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect

    Rathbone, Bruce A.

    2010-01-01

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document. Maintenance and distribution of controlled hard copies of the

  5. National ESEA Chapter 1 Schoolwide Projects Conference.

    ERIC Educational Resources Information Center

    Cleveland Public Schools, OH.

    This document is a collection of schoolwide compensatory education project plans for 22 elementary schools in the Cleveland (Ohio) Public Schools system, with funding provided by Chapter 1 of the Education Consolidation and Improvement Act. Chapter 1 project plans are included for the following schools: (1) Alfred A. Benesch; (2) Andrew J.…

  6. Chapter 6: Selenium Toxicity to Aquatic Organisms

    EPA Science Inventory

    This chapter addresses the characteristics and nature of organic selenium (Se) toxicity to aquatic organisms, based on the most current state of scientific knowledge. As such, the information contained in this chapter relates to the 'toxicity assessment' phase of aquatic ecologi...

  7. Evaluation of core data, physical properties, and oil yield USBM/AEC Colorado Core Hole no. 3 (Bronco BR-1)

    USGS Publications Warehouse

    Ege, John R.; Carroll, R.D.; Way, R.J.; Magner, J.E.

    1969-01-01

    USBM/AEC Colorado Core Hole No. 3 (Bronco BR-1) is located in the SW1/4SW1/4SW1/4 sec. 14, T. 1 N., R. 98 W., Rio Blanco County, Colorado. The collar is at a ground elevation of 6,356 feet. The hole was core drilled between depths of 964 and 3,325 feet with a total depth of 3,797 feet. The hole was drilled to investigate geologic, geophysical and hydrological conditions at a possible in situ oil-shale retorting experiment site. The drill hole passed through 1,157 feet of alluvium and the Evacuation Creek Member of the Green River Formation, 1,603 feet of the Parachute Creek Member and penetrated into the Garden Gulch Member of the Green River Formation. In-bole density log/oil yield ratio interpretation indicates that two oil-shale zones exist which yield more than 20 gallons of shale oil per ton of rock; an upper zone lying between 1,271 and 1,750 feet in depth and a lower zone lying between 1,900 and 2,964 feet. Halite (sodium chloride salt) is found between 2,140 and 2,185 feet and nahcolite (sodium bicarbonate salt) between 2,195 and 2,700 feet. Nahcolite was present at one time above 2,195 feet but has been subsequently dissolved out by ground water. The core can be divided into six structural units based upon degree of fracturing. A highly fractured interval is found between 1,646 and 1,899 feet, which coincides with the dissolution or leached nahcolite zone. Physical property tests made on core samples between 1,356 and 3,253 feet give average values of 11,988 psi for uniaxial compressive strength, 1.38 X 10[superscript]6[superscript] psi for static Young's modulus and 11,809 fps for compressional velocity.

  8. Texas Hunter Education Manual.

    ERIC Educational Resources Information Center

    Hall, Steve

    This handbook serves as a reference for the mandatory hunter education course in Texas. The "Introduction" explains hunter education's goal to produce safe, knowledgeable, responsible, and informed hunters. It also gives information related to hunting opportunities, administration, and management. Chapter 2, "Our Hunting Heritage," gives a…

  9. Industrial Radiography Manual.

    ERIC Educational Resources Information Center

    Richardson, Harry D.

    This text was developed for use by students in an 80-hour course for industrial radiographers. Chapter headings are: (1) The Structure of Matter, (2) Radiation and Radiation Machines, (3) Nuclear Reactions and Radioisotopes, (4) Interaction of Radiation with Matter, (5) Radiation Detection and Measurement, (6) The Nature and Consequences of…

  10. The Cybrarian's Manual 2.

    ERIC Educational Resources Information Center

    Ensor, Pat, Ed.

    This book examines technical, social, and management issues related to librarians and cyberspace. The following chapters and articles are included: (1) "The Cybrarian's Tool Kit," including "Internet News and Website Reviews" (M. Sylvia), "Searching the Future" (J. Powell), "Netiquette, Hoaxes, and Scams! Oh My!" (E. Dupuis), and "The New Library…

  11. Chapter 17: Estimating Net Savings: Common Practices

    SciTech Connect

    Violette, D. M.; Rathbun, P.

    2014-09-01

    This chapter focuses on the methods used to estimate net energy savings in evaluation, measurement, and verification (EM&V) studies for energy efficiency (EE) programs. The chapter provides a definition of net savings, which remains an unsettled topic both within the EE evaluation community and across the broader public policy evaluation community, particularly in the context of attribution of savings to particular program. The chapter differs from the measure-specific Uniform Methods Project (UMP) chapters in both its approach and work product. Unlike other UMP resources that provide recommended protocols for determining gross energy savings, this chapter describes and compares the current industry practices for determining net energy savings, but does not prescribe particular methods.

  12. CAM Coordinator's Manual.

    ERIC Educational Resources Information Center

    Rodel, Lee J.

    The technical implementation and operation of the Comprehensive Achievement Monitoring (CAM) system are discussed in this manual. It is written as a guide for those responsible for implementing CAM and for processing CAM-related work requests. Subjects covered include: CAM system operation summary: objectives and test items; conferencing with the…

  13. Manually operated coded switch

    DOEpatents

    Barnette, Jon H.

    1978-01-01

    The disclosure relates to a manually operated recodable coded switch in which a code may be inserted, tried and used to actuate a lever controlling an external device. After attempting a code, the switch's code wheels must be returned to their zero positions before another try is made.

  14. Enforcement Field Operations Manual.

    ERIC Educational Resources Information Center

    Colorado State Dept. of Health, Denver. Div. of Air Pollution Control.

    This manual is designed as a practical handbook for air pollution control officials. A variety of situations and tasks encountered in field operations are described and the appropriate action which should be taken is explained Topics include source detection, source inspection, recording and reporting inspections, maintaining a recording system,…

  15. NASCAP user's manual, 1978

    NASA Technical Reports Server (NTRS)

    Cassidy, J. J., III

    1978-01-01

    NASCAP simulates the charging process for a complex object in either tenuous plasma (geosynchronous orbit) or ground test (electron gun source) environment. Program control words, the structure of user input files, and various user options available are described in this computer programmer's user manual.

  16. Therapeutic Recreation Practicum Manual.

    ERIC Educational Resources Information Center

    Schneegas, Kay

    This manual provides information on the practicum program offered by Moraine Valley Community College (MVCC) for students in its therapeutic recreation program. Sections I and II outline the rationale and goals for providing practical, on-the-job work experiences for therapeutic recreation students. Section III specifies MVCC's responsibilities…

  17. Water Quality Monitoring Manual.

    ERIC Educational Resources Information Center

    Mason, Fred J.; Houdart, Joseph F.

    This manual is designed for students involved in environmental education programs dealing with water pollution problems. By establishing a network of Environmental Monitoring Stations within the educational system, four steps toward the prevention, control, and abatement of water pollution are proposed. (1) Train students to recognize, monitor,…

  18. The TUTOR Manual.

    ERIC Educational Resources Information Center

    Avner, R. A.; Tenczar, Paul

    The TUTOR logic-building language to be used with the PLATO (Programmed Logic for Automated Teaching Operations) system is explained in this manual. TUTOR is designed to transcend the difficulties of FORTRAN for a computer-based educational system utilizing graphical screen displays. The language consists of about seventy words or "commands" which…

  19. Environmental Science Laboratory Manual.

    ERIC Educational Resources Information Center

    Strobbe, Maurice A.

    The objective of this manual is to provide a set of basic analytical procedures commonly used to determine environmental quality. Procedures are designed to be used in an introductory course in environmental science and are explicit enough to allow them to be performed by both the non-science or beginning science student. Stressing ecology and…

  20. General Drafting. Technical Manual.

    ERIC Educational Resources Information Center

    Department of the Army, Washington, DC.

    The manual provides instructional guidance and reference material in the principles and procedures of general drafting and constitutes the primary study text for personnel in drafting as a military occupational specialty. Included is information on drafting equipment and its use; line weights, conventions and formats; lettering; engineering charts…

  1. Enucleation Procedure Manual.

    ERIC Educational Resources Information Center

    Davis, Kevin; Poston, George

    This manual provides information on the enucleation procedure (removal of the eyes for organ banks). An introductory section focuses on the anatomy of the eye and defines each of the parts. Diagrams of the eye are provided. A list of enucleation materials follows. Other sections present outlines of (1) a sterile procedure; (2) preparation for eye…

  2. Manual for physical fitness

    NASA Technical Reports Server (NTRS)

    Coleman, A. E.

    1981-01-01

    Training manual used for preflight conditioning of NASA astronauts is written for audience with diverse backgrounds and interests. It suggests programs for various levels of fitness, including sample starter programs, safe progression schedules, and stretching exercises. Related information on equipment needs, environmental coonsiderations, and precautions can help readers design safe and effective running programs.

  3. Intrinsic Analysis Training Manual.

    ERIC Educational Resources Information Center

    Gow, Doris T.

    This manual is for the training of linking agents between Education R&D and schools and for training teachers in the process of intrinsic analysis of curriculum materials. Intrinsic analysis means analysis of the instruction or process through examination of the materials, or artifacts, including teacher and student materials, developer's…

  4. Fieldwork Supervisor's Manual.

    ERIC Educational Resources Information Center

    Bowler, Rosemarie M.; And Others

    This manual, intended for community agency personnel who supervise students in undergraduate field placements, presents suggestions to aid the supervisor in providing the student with a valuable and rewarding experience which will also be of value to the agency. Issues are presented in sections reflecting the common sequence of events in a…

  5. Typing Manuscripts. General Manual.

    ERIC Educational Resources Information Center

    Snapp, Jane

    Supporting performance objective 83 of the V-TECS (Vocational-Technical Education Consortium of States) Secretarial Catalog, both a set of student materials and an instructor's manual on typing manuscripts are included in this packet. (The packet is the tenth in a set of fifteen on typewriting--CE 016 920-934.) The packet includes four learning…

  6. Child Welfare Policy Manual

    ERIC Educational Resources Information Center

    Administration for Children & Families, 2008

    2008-01-01

    This document conveys mandatory policies that have their basis in Federal Law and/or program regulations. It also provides interpretations of Federal Statutes and program regulations initiated by inquiries from State Child Welfare agencies or Administration for Children and Families (ACF) Regional Offices. The manual replaces the Children's…

  7. Aquatic Microbiology Laboratory Manual.

    ERIC Educational Resources Information Center

    Cooper, Robert C.; And Others

    This laboratory manual presents information and techniques dealing with aquatic microbiology as it relates to environmental health science, sanitary engineering, and environmental microbiology. The contents are divided into three categories: (1) ecological and physiological considerations; (2) public health aspects; and (3)microbiology of water…

  8. Disaster Preparedness Manual.

    ERIC Educational Resources Information Center

    Michael, Douglas O.

    Prepared for use by the staff of a community college library, this manual describes the natural, building, and human hazards which can result in disaster in a library and outlines a set of disaster prevention measures and salvage procedures. A list of salvage priorities, floor plans for all three levels of Bourke Memorial Library, and staff duties…

  9. Manual for CLE Lecturers.

    ERIC Educational Resources Information Center

    Shellaberger, Donna J.

    This manual is designed to help lawyers develop the skills needed to present effective, stimulating continuing legal education (CLE) lectures. It focuses on the particular purpose and nature of CLE lecturing, relationships and interplay of personalities in CLE, commitments and constraints which lecturers should observe, program structure and…

  10. Marketing Manual: Workplace Literacy.

    ERIC Educational Resources Information Center

    Fanshawe Coll., Strathroy (Ontario).

    This manual applies marketing concepts and methods, selling techniques and principles to the workplace literacy program for the purpose of assisting individuals involved in promoting and selling these programs. Part I provides a rationale for marketing and discusses the following: the role of the sponsor in marketing, market versus marketing,…

  11. Records Management Manual.

    ERIC Educational Resources Information Center

    Alaska State Dept. of Education, Juneau. State Archives and Records Management.

    This manual, prepared primarily for state government agencies, describes the organization and management of Alaska government records. Information is presented in nine topic areas: (1) Alaska's Archives and Records Management Program, which describes the program, its mission, services available, and employee responsibilities; (2) Records in…

  12. Student Teacher Manual.

    ERIC Educational Resources Information Center

    Wright, Cheryl

    Written in outline form to provide basic information to student teachers about the University of Utah's Child and Family Development Center preschool program, this manual describes a model preschool program based on creative thinking skills. Included are: a description of the program's creative philosophy which also contains a list of blocks to…

  13. Consumer Decisions. Student Manual.

    ERIC Educational Resources Information Center

    Florida State Dept. of Education, Tallahassee. Div. of Vocational Education.

    This student manual covers five areas relating to consumer decisions. Titles of the five sections are Consumer Law, Consumer Decision Making, Buying a Car, Convenience Foods, and Books for Preschool Children. Each section may contain some or all of these materials: list of objectives, informative sections, questions on the information and answers,…

  14. Political Education Manual.

    ERIC Educational Resources Information Center

    League of United Latin American Citizens, Washington, DC.

    Written to help Hispanics understand the electoral process more thoroughly and to encourage them to participate more actively in the political arena, this manual begins by describing the present status of the Hispanic electorate and then explains how laws are made, how Hispanics can influence legislation, and how to organize a voter registration…

  15. Outdoor Education Manual.

    ERIC Educational Resources Information Center

    Nashville - Davidson County Metropolitan Public Schools, TN.

    Creative ways to use the outdoors as a part of the regular school curriculum are outlined in this teacher's manual for the elementary grades. Presented for consideration are the general objectives of outdoor education, suggestions for evaluating outdoor education experiences, and techniques for teaching outdoor education. The purpose and functions…

  16. Educator Effectiveness Administrative Manual

    ERIC Educational Resources Information Center

    Pennsylvania Department of Education, 2014

    2014-01-01

    The goal of this manual is to provide guidance in the evaluation of educators, highlight critical components of effectiveness training, and offer opportunities for professional growth. The term "educator" includes teachers, all professional and temporary professional employees, education specialists, and school administrators/principals.…

  17. Consumer Education Reference Manual.

    ERIC Educational Resources Information Center

    Tennessee Univ., Knoxville. State Agency for Title I.

    This manual contains information for consumer education, which is defined as the process of imparting to an individual the skills, concepts, knowledges, and insights required to help each person evolve his or her own values, evaluate alternative choices in the marketplace, manage personal resources effectively, and obtain the best buys for his or…

  18. DYS Volunteer Services Manual.

    ERIC Educational Resources Information Center

    Boyles, Al

    This manual provides information for volunteers with the North Carolina Division of Youth Services. It describes the Division's history in developing correctional facilities, its philosophy and goals, and the administration of its training schools and detention centers. It cites examples of volunteer involvement in the areas of administrative and…

  19. System Documentation Manual.

    ERIC Educational Resources Information Center

    Semmel, Melvyn I.; Olson, Jerry

    The document is a system documentation manual of the Computer-Assisted Teacher Training System (CATTS) developed by the Center for Innovation in Teaching the Handicapped (Indiana University). CATTS is characterized as a system capable of providing continuous, instantaneous, and/or delayed feedback of relevant teacher-student interaction data to a…

  20. Discretionary Grants Administration Manual.

    ERIC Educational Resources Information Center

    Office of Human Development Services (DHHS), Washington, DC.

    This manual sets forth applicable administrative policies and procedures to recipients of discretionary project grants or cooperative agreements awarded by program offices in the Office of Human Development Services (HDS). It is intended to serve as a basic reference for project directors and business officers of recipient organizations who are…

  1. DFLOW USER'S MANUAL

    EPA Science Inventory

    DFLOW is a computer program for estimating design stream flows for use in water quality studies. The manual describes the use of the program on both the EPA's IBM mainframe system and on a personal computer (PC). The mainframe version of DFLOW can extract a river's daily flow rec...

  2. Microcomputer Laboratory Manual.

    ERIC Educational Resources Information Center

    Van Dusseldorp, Ralph; And Others

    Intended to serve as a guide to the development of basic computer competencies for students in teacher preparation programs or as inservice training for teachers, this primarily self-instructional manual provides basic information, worksheets, computer programs, and hands-on learning activities for 16 proficiencies related to computer literacy.…

  3. LOGO Manual. Draft.

    ERIC Educational Resources Information Center

    Abelson, Hal; And Others

    This manual describes the LOGO system implemented for the PDP 11/45 at the MIT Artificial Intelligence Laboratory. The "system" includes a LOGO evaluator, a dedicated time-sharing system, and various special devices related to output such as robot turtles, tone generators, and cathode ray tube displays. (Author/SD)

  4. Head Start Facilities Manual.

    ERIC Educational Resources Information Center

    Research Assessment Management, Inc., Silver Spring, MD.

    A quality Head Start facility should provide a physical environment responsive both to the needs of the children and families served and to the needs of staff, volunteers, and community agencies that share space with Head Start. This manual is a tool for Head Start grantees and delegate agencies for assessing existing facilities, making…

  5. HEMPDS user's manual

    SciTech Connect

    Warren, K.H.

    1983-02-01

    HEMPDS, the double-slide version of two-dimensional HEMP, allows the intersection of slide lines and slide lines in any direction, thus making use of triangular zones. this revised user's manual aids the physicist, computer scientist, and computer technician in using, maintaining, and coverting HEMPDS. Equations, EOS models, and sample problems are included.

  6. Fiscal Accounting Manual.

    ERIC Educational Resources Information Center

    California State Dept. of Housing and Community Development, Sacramento. Indian Assistance Program.

    Written in simple, easy to understand form, the manual provides a vehicle for the untrained person in bookkeeping to control funds received from grants for Indian Tribal Councils and Indian organizations. The method used to control grants (federal, state, or private) is fund accounting, designed to organize rendering services on a non-profit…

  7. Rescue Manual. Module 5.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Instructional Materials Lab.

    This learner manual for rescuers covers the current techniques or practices required in the rescue service. The fifth of 10 modules contains information on hazardous materials. Key points, an introduction, and conclusion accompany substantive material in this module. In addition, the module contains a Department of Transportation guide chart on…

  8. Sewer Maintenance Manual.

    ERIC Educational Resources Information Center

    Ontario Ministry of the Environment, Toronto.

    Outlined are practices and procedures that should be followed in order to protect and fully realize the benefits of sewer systems and also to maximize service and minimize inconveniences to the public. Written in practical terms, the manual is designed to be of immediate use to municipal employees and others involved in sewer maintenance…

  9. Job Placement Manual.

    ERIC Educational Resources Information Center

    Atlanta Public Schools, GA.

    Directed to school systems initiating a job placement program, the Atlanta Public Schools (Georgia) job placement manual discusses how a job placement program can provide a transition from school to work for all students leaving the public schools, as well as place students in paid and non-paid part-time work experiences as a part of their…

  10. Water Chemistry Laboratory Manual.

    ERIC Educational Resources Information Center

    Jenkins, David; And Others

    This manual of laboratory experiments in water chemistry serves a dual function of illustrating fundamental chemical principles of dilute aqueous systems and of providing the student with some familiarity with the chemical measurements commonly used in water and wastewater analysis. Experiments are grouped in categories on the basis of similar…

  11. Keypunching Manual. Third Edition.

    ERIC Educational Resources Information Center

    Oldsen, Carl F.; Spagnuolo, Lenore

    Presented in the manual are keypunching procedures with associated representative forms and keypunching cards for bibliographies and five basic types of abstracts which are used with the Control Data 3600 computer by the Michigan State University Materials Center for Handicapped Children and Youth (IMC HCY). Emphasis is given to keypunching all…

  12. Book Repair Manual.

    ERIC Educational Resources Information Center

    Milevski, Robert J.

    1995-01-01

    This book repair manual developed for the Illinois Cooperative Conservation Program includes book structure and book problems, book repair procedures for 4 specific problems, a description of adhesive bindings, a glossary, an annotated list of 11 additional readings, book repair supplies and suppliers, and specifications for book repair kits. (LRW)

  13. Peer Leadership Manual.

    ERIC Educational Resources Information Center

    Lovell, Nikki; Hachmeister, Paula

    This is a manual for peer counselors and parents in an alcohol and drug abuse prevention program for teenagers. The document opens with the training objectives for the peer helpers: to know yourself, to be a resource, and to promote and establish a drug-free peer group and drug-free activities in school. Discussion on these topics is provided: (1)…

  14. LOGSIM programmer's manual

    NASA Technical Reports Server (NTRS)

    Mitchell, C. L.; Taylor, J. F.

    1976-01-01

    A programmer's manual is reported for a Logic Simulator (LOGSIM) computer program that is a large capacity event simulator with the capability to accurately simulate the effects of certain unknown states, rise and fall times, and floating nodes in large scale metal oxide semiconductor logic circuits. A detailed description of the software with flow charts is included within the report.

  15. Young Adult Services Manual.

    ERIC Educational Resources Information Center

    Boegen, Anne, Ed.

    Designed to offer guidelines, ideas and help to those who provide library service to young adults, this manual includes information about the provision of young adult (YA) services in six sections. The first section, which addresses planning and administration, includes a definition of a young adult and a checklist for determining community needs…

  16. Children's Collective Training Manual.

    ERIC Educational Resources Information Center

    Kimbrough, Jackie; And Others

    This children's collective manual describes a training program for parents and teachers of preschool children which is designed to encourage cooperative, community-oriented styles of group interaction in black preschool children. Developed by the Children's Collective of the Coordinated Child Care Council of South Los Angeles, the program is based…

  17. Audiology Services Manual.

    ERIC Educational Resources Information Center

    Gallaudet Coll., Washington, DC. Pre-College Programs.

    The manual describes audiology services offered at the Model Secondary School for the Deaf (MSSD). Components are listed for diagnostic services, instructional services, program development, training, and publications. Testing and reporting procedures for MSSD students are outlined. Testing includes pure-tone air conduction testing, tympanometry,…

  18. Southern Ductile Training Manual.

    ERIC Educational Resources Information Center

    Alabama State Dept. of Education, Montgomery.

    This instructor's manual contains the materials required to conduct the competency-based workplace literacy program that was developed to help employees at a foundry that has evolved from a small, family-owned business into a major foundry group with several automated production systems. The workplace literacy program consists of 24 lessons in…

  19. Learning Resources Evaluations Manual.

    ERIC Educational Resources Information Center

    Nunes, Evelyn H., Ed.

    This Learning Resources Evaluation Manual (LREM) contains evaluations of 140 instructional products listed in the 1994 supplement to Virginia's Adult Education Curricula Resource Catalog. A table of contents lists topics/subjects and page numbers. Some titles that are useful under more than one category are cross-listed for easy reference. These…

  20. Operations Policy Manual, 2012

    ERIC Educational Resources Information Center

    Teacher Education Accreditation Council, 2011

    2011-01-01

    The Teacher Education Accreditation Council's (TEAC's) "Operations Policy Manual" outlines all of TEAC's current policies and procedures related to TEAC members, TEAC administration, and the public, and includes the Bylaws of the Teacher Education Accreditation Council. Contents include: (1) Policies Related to TEAC Members; (2) Policies Related…

  1. Operations Policy Manual, 2010

    ERIC Educational Resources Information Center

    Teacher Education Accreditation Council, 2010

    2010-01-01

    The Teacher Education Accreditation Council (TEAC) "Operations Policy Manual" outlines all of TEAC's current policies and procedures related to TEAC members, TEAC administration, and the public, and includes the Bylaws of the Teacher Education Accreditation Council, Inc. An index is also included.

  2. Ohio School Design Manual.

    ERIC Educational Resources Information Center

    Ohio School Facilities Commission, Columbus.

    This manual presents guidance to facility designers, school administrators, staff, and students for the development of school facilities being constructed under Ohio's Classroom Facilities Assistance Program. It provides critical analysis of individual spaces and material/system components necessary for the construction of elementary and secondary…

  3. Family Assessment Process Manual.

    ERIC Educational Resources Information Center

    Patterson, Jerri; And Others

    The five-step family assessment process presented in this manual is designed to facilitate the accurate, organized collection of information necessary for the development of an intervention plan for families with children. The materials contain the five forms that are to be completed as part of the assessment process, including a: (1) family…

  4. Soar User's Manual.

    ERIC Educational Resources Information Center

    Laird, John E.

    This manual describes Version 4 of Soar, an architecture for problem solving and learning based on heuristic search and chunking. Version 4 is available as of January 1986 in Common Lisp, Franz-Lisp, Interlisp, and Zeta-Lisp. An introduction to the Soar system is presented, and information is provided about the following system aspects: (1) data…

  5. Christmas Tree Category Manual.

    ERIC Educational Resources Information Center

    Bowman, James S.; Turmel, Jon P.

    This manual provides information needed to meet the standards for pesticide applicator certification. Pests and diseases of christmas tree plantations are identified and discussed. Section one deals with weeds and woody plants and the application, formulation and effects of herbicides in controlling them. Section two discusses specific diseases…

  6. Hunter Education Instructors Manual.

    ERIC Educational Resources Information Center

    Alexander, Jack E.

    The instructors manual for teaching ethics, conservation, and safe hunting to Alaskans provides a uniform course in hunter education for both young people and adults, regardless of previous hunting experience. Developed as part of a training program in hunter ethics and safe handling of hunting equipment, the hunter education course is designed to…

  7. 26 CFR 31.3503-1 - Tax under chapter 21 or 22 paid under wrong chapter.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 15 2010-04-01 2010-04-01 false Tax under chapter 21 or 22 paid under wrong chapter. 31.3503-1 Section 31.3503-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY... TAX AT SOURCE General Provisions Relating to Employment Taxes (Chapter 25, Internal Revenue Code...

  8. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect

    Rathbone, Bruce A.

    2009-08-28

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document.

  9. [Manual therapy in general practice].

    PubMed

    Березуцкий, Владимир И

    2016-01-01

    The article is devoted to manual therapy practice for diagnostics and treatment of vertebrogenic pain syndrome in general practice. Analytical roundup of sources proves medical advantage of implementation of manual therapy basic methods by general practice specialists. PMID:27487550

  10. [Manual therapy in general practice].

    PubMed

    Березуцкий, Владимир И

    2016-01-01

    The article is devoted to manual therapy practice for diagnostics and treatment of vertebrogenic pain syndrome in general practice. Analytical roundup of sources proves medical advantage of implementation of manual therapy basic methods by general practice specialists.

  11. Introduction to Hydraulics. Student's Manual.

    ERIC Educational Resources Information Center

    Texas Univ., Austin. Extension Instruction and Materials Center.

    This manual on hydraulics is one of a series of individualized instructional materials for students. The manual is self-paced, but is designed to be used under the supervision of an instructor. The manual contains 10 assignments, each with all the information needed, a list of objectives that should be met, and exercise questions that can help in…

  12. Manual ability and manual dexterity in children with cerebral palsy

    PubMed Central

    Golubović, Š; Slavković, S

    2014-01-01

    Introduction: Manual ability and performance of dexterity tasks require both gross and fine hand motions and coordination. The aim of this study was to determine the level of manual dexterity (capacity) and investigate its relationship with manual ability (performance) in children with cerebral palsy. Method: This study was designed as a cross-sectional study of 30 children with cerebral palsy (aged 8-15 years). In order to assess gross manual dexterity the Box and Block Test was used. Manual ability was assessed according to Manual Ability Classification System (MACS). Results: A relationship between the level of manual ability impairment and performance on manual dexterity tasks was expressed. Participants at MACS level IV demonstrated slowest times and transferred the smallest number of blocks (p<0.01). This study also found that correlation between Gross Motor Function Classification Scale (GMFCS) and MACS is statistically significant (p<0.001). All hand skills were more impaired in the non-dominant hand compared to the dominant hand but there were no statistically significant difference (p=0.06). Conclusion: The results suggest that gross manual dexterity is a good predictor of manual abilities in children with cerebral palsy. These results provide better understanding of the relationship between manual dexterity and activity limitations and lend credibility to the use of these classification systems and assessments in order to optimize treatment planning and evaluate interventions and progress. Hippokratia 2014; 18 (4): 310-314. PMID:26052196

  13. Misinterpretations of United States pharmacopeia chapter <797>.

    PubMed

    McElhiney, Linda F

    2012-01-01

    By now, all compounding pharmacists should be aware that United States Pharmacopeia Chapter <797> has been revised. However, the revisions are tedious to read and may be misinterpreted. This article discusses some of the misinterpreted revisions of United States Pharmacopeia Chapter <797> and clarifies the revisions on the topics of Terminology, The Compounder, Facilities and Environment, Personnel Cleansing and Garbing, Assigning Beyond-use Dates, and Testing. Compounders need to take a firm stand with these misinterpretations of United States Pharmacopeia Chapter <797> and educate those who are not thoroughly familiar with the document. Compounders need to be diligent in following these standards to prevent harm to the patients.

  14. ASPEN costing manual

    SciTech Connect

    Schwint, K.J.

    1986-07-25

    The ASPEN program contains within it a Cost Estimation System (CES) which estimates the purchase cost and utility consumption rates for major pieces of equipment in a process flowsheet as well as installed equipment costs. These estimates are ''preliminary-study grade'' with an accuracy of plus or minus 30%. The ASPEN program also contains within it an Economic Evaluation System (EES) which estimates overall capital investment costs, annual operating expenses and profitability indices for a chemical plant. This ASPEN costing manual has been written as a guide for those inexperienced in the use of ASPEN and unfamiliar with standard cost estimating techniques who want to use the ASPEN CES and EES. The ASPEN Costing Manual is comprised of the following sections: (1) Introduction, (2) ASPEN Input Language, (3) ASPEN Cost Estimation System (CES), (4) ASPEN Cost Blocks; and (5) ASPEN Economic Evaluation System (EES).

  15. IAC user manual

    NASA Technical Reports Server (NTRS)

    Vos, R. G.; Beste, D. L.; Gregg, J.

    1984-01-01

    The User Manual for the Integrated Analysis Capability (IAC) Level 1 system is presented. The IAC system currently supports the thermal, structures, controls and system dynamics technologies, and its development is influenced by the requirements for design/analysis of large space systems. The system has many features which make it applicable to general problems in engineering, and to management of data and software. Information includes basic IAC operation, executive commands, modules, solution paths, data organization and storage, IAC utilities, and module implementation.

  16. ASSIST internals reference manual

    NASA Technical Reports Server (NTRS)

    Johnson, Sally C.; Boerschlein, David P.

    1994-01-01

    The Abstract Semi-Markov Specification Interface to the SURE Tool (ASSIST) program was developed at NASA LaRC in order to analyze the reliability of virtually any fault-tolerant system. A user manual was developed to detail its use. Certain technical specifics are of no concern to the end user, yet are of importance to those who must maintain and/or verify the correctness of the tool. This document takes a detailed look into these technical issues.

  17. Manual of carbonate sedimentology

    SciTech Connect

    Reijers, T.J.; Hsu, K.S.

    1986-01-01

    This manual, organised along encycolopaedic/lexicographic lines, summarizes information on the properties and characteristics of carbonates and their environments. Part 1 deals with the elements of carbonates; Part 2 with environments, settings, and carbonate bodies; Part 3 with carbonate diagenesis, and Part 4 with carbonate reservoirs. Contents include: Elements of carbonates; Carbonate Environments, Settings and Bodies; Carbonate diagenesis; Carbonate reservoirs; Alphabetical Indices; English, Dutch, German, Spanish, French Computer Compatible Codes; Commonly Used (Informal) abbreviations.

  18. PISCES 2 users manual

    NASA Technical Reports Server (NTRS)

    Pratt, Terrence W.

    1987-01-01

    PISCES 2 is a programming environment and set of extensions to Fortran 77 for parallel programming. It is intended to provide a basis for writing programs for scientific and engineering applications on parallel computers in a way that is relatively independent of the particular details of the underlying computer architecture. This user's manual provides a complete description of the PISCES 2 system as it is currently implemented on the 20 processor Flexible FLEX/32 at NASA Langley Research Center.

  19. Cognitive Psychology: A Computer-Oriented Laboratory Manual. Student Manual and Instructor Manual.

    ERIC Educational Resources Information Center

    Bewley, William L.

    The six experiments presented in these two manuals were designed for use in any introductory or advanced undergraduate psychology course either partially or totally concerned with human cognition. One manual serves as the teacher's accompaniment to the actual experiments detailed in the student's manual. A list of textbooks which might be…

  20. Approaches to manual ventilation.

    PubMed

    Davies, John D; Costa, Brian K; Asciutto, Anthony J

    2014-06-01

    Manual ventilation is a basic skill that involves airway assessment, maneuvers to open the airway, and application of simple and complex airway support devices and effective positive-pressure ventilation using a bag and mask. An important part of manual ventilation is recognizing its success and when it is difficult or impossible and a higher level of support is necessary to sustain life. Careful airway assessment will help clinicians identify what and when the next step needs to be taken. Often simple airway maneuvers such as the head tilt/chin lift and jaw thrust can achieve a patent airway. Appropriate use of airway adjuncts can further aid the clinician in situations in which airway maneuvers may not be sufficient. Bag-mask ventilation (BMV) plays a vital role in effective manual ventilation, improving both oxygenation and ventilation as well as buying time while preparations are made for endotracheal intubation. There are, however, situations in which BMV may be difficult or impossible. Anticipation and early recognition of these situations allows clinicians to quickly make adjustments to the method of BMV or to employ a more advanced intervention to avoid delays in establishing adequate oxygenation and ventilation.

  1. Ergonomics of manual harvesting.

    PubMed

    Prussia, S E

    1985-09-01

    Manual harvesting has many advantages compared with the mechanical harvesting of most fruit crops. The most important advantage is visual image processing ability which enables workers rapidly to detect fruit suitable for harvest and direct their hand to the fruit selected for detachment. Lacking the necessary computer based image processing equipment, designers of mechanical harvesters have settled for mass removal approaches that typically results in more damage than normal when fruit is harvested individually. Although manual harvesting has the disadvantage of low capacity, it is expected that much of the world's fruit will continue to be harvested by hand for the foreseeable future. Several ergonomics principles that relate to manual harvesting are discussed. Methods for improving worker conditions and productivity are presented. Worker positioners increase productivity by 20 to 40% and enable use of sun shades, fans, conveyors and other devices that increase comfort and reduce fatigue. Testing and training can yield substantial benefits from small inputs. Tests for visual acuity, colour sensitivity, strength, etc, can help managers assign tasks to the most suitable workers. Training programmes help workers to have a clear mental picture of acceptable fruit and encourage compliance with handling, safety and other procedures. Satisfaction of human drives such as thirst, hunger, thermal comfort and avoidance of pain results in long-range benefits.

  2. Chapter 42. Waterborne and Foodborne Parasites

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This chapter identifies the most prominent parasites in North America that are acquired through contaminated food and water including protozoa (Acanthamoeba, Naegleria, Entamoeba, Giardia, Cryptosporidium, Cystoisospora, Cyclospora, Toxoplasma, and Balantidium), nematodes (Trichinella, Angiostrongyl...

  3. How to write a medical book chapter?

    PubMed

    Kendirci, Muammer

    2013-09-01

    Invited medical book chapters are usually requested by editors from experienced authors who have made significant contributions to the literature in certain fields requested by an editor from an experienced. Before the start of the writing process a consensus should be established between the editor and the author with regard to the title, deadline, specific instructions and content of the manuscript. Certain issues concerning a chapter can be negotiated by the parties beforehand, but some issues cannot. As writing a medical book chapter is seen as an honor in its own right, the assignment needs to be treated with sincerity by elucidating the topic in detail, and maximal effort should be made to keep in mind that the chapter will reach a large target audience. The purpose of this review article is to provide guidance to residents and junior specialists in the field of urology to improve their writing skills.

  4. AIR POLLUTION CONTROL TECHNOLOGIES (CHAPTER 65)

    EPA Science Inventory

    The chapter discusses the use of technologies for reducing air pollution emissions from stationary sources, with emphasis on the control of combustion gen-erated air pollution. Major stationary sources include utility power boilers, industrial boilers and heaters, metal smelting ...

  5. AMPLIFICATION OF RIBOSOMAL RNA SEQUENCES - Book Chapter

    EPA Science Inventory

    This book chapter contains the following headings and subheadings: Introduction; Experimental Approach - Precautions, Template, Primers, Reaction Conditions, Enhancers, Post Amplification; Procedures - Template DNA, Basic PCR, Thermal Cycle Parameters, Enzyme Addition, Agarose Ge...

  6. Where Social and Professional Networking Meet: The Virtual Association Chapter

    ERIC Educational Resources Information Center

    Noxon, Rose

    2011-01-01

    Online Capella University wanted to sponsor an International Society for Performance Improvement (ISPI) chapter. Using social networking platforms, a new type of chapter was designed. The virtual chapter breaks new ground on more than the chapter's platform; it is also the first university-sponsored chapter and has a unique approach to…

  7. 48 CFR 9900.000 - Scope of chapter.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Scope of chapter. 9900.000... PROCUREMENT POLICY, OFFICE OF MANAGEMENT AND BUDGET SCOPE OF CHAPTER 9900.000 Scope of chapter. This chapter... and subcontracts. This chapter does not apply to sealed bid contracts or to any contract with a...

  8. 1 CFR 21.8 - Chapters and subchapters.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 1 General Provisions 1 2010-01-01 2010-01-01 false Chapters and subchapters. 21.8 Section 21.8... Chapters and subchapters. (a) The normal divisions of a title are chapters, assigned to the various...) Subchapters may be used to group related parts within a chapter. (c) Chapter and subchapter assignments...

  9. Chapter IV - Safety During Payload Ground Processing

    NASA Technical Reports Server (NTRS)

    Kirkpatrick, Paul; Dollberg, John; Trinchero, Jean-Pierre

    2012-01-01

    This chapter describes the typical hazards that can be expected to be encountered when processing payloads on the ground. Also described are some of the more common controls for these hazards. Many of these controls are based on hard requirements but they are also based on specific lessons learned. This chapter uses the term Flight Hardware (F/H) for all payloads regardless of size.

  10. Training Guide for Foodservice Personnel in Programs for Young Children. A Manual for Nutritionists, Dietitians, and Foodservice Specialists Who Are Developing and Conducting Training Programs.

    ERIC Educational Resources Information Center

    Development Associates, Inc., Arlington, VA.

    This manual is a competency-based curriculum planning guide for nutritionists, dietitians, and foodservice specialists to use in conducting preservice and inservice training programs for foodservice personnel in Head Start, day care, and other preschool programs. After an introductory chapter, which states the purpose of the manual, defines…

  11. 3DGRAPE/AL User's Manual

    NASA Technical Reports Server (NTRS)

    Sorenson, Reese L.; Alter, Stephen J.

    1995-01-01

    This document is a users' manual for a new three-dimensional structured multiple-block volume g generator called 3DGRAPE/AL. It is a significantly improved version of the previously-released a widely-distributed programs 3DGRAPE and 3DMAGGS. It generates volume grids by iteratively solving the Poisson Equations in three-dimensions. The right-hand-side terms are designed so that user-specific; grid cell heights and user-specified grid cell skewness near boundary surfaces result automatically, with little user intervention. The code is written in Fortran-77, and can be installed with or without a simple graphical user interface which allows the user to watch as the grid is generated. An introduction describing the improvements over the antecedent 3DGRAPE code is presented first. Then follows a chapter on the basic grid generator program itself, and comments on installing it. The input is then described in detail. After that is a description of the Graphical User Interface. Five example cases are shown next, with plots of the results. Following that is a chapter on two input filters which allow use of input data generated elsewhere. Last is a treatment of the theory embodied in the code.

  12. Aircrew Survival Equipmentman 1 and C. NAVPERS 10360-D. Rate Training Manual.

    ERIC Educational Resources Information Center

    Bureau of Naval Personnel, Washington, DC.

    A guide for advancement and training in the Aircrew Survival Equipmentman rating for enlisted personnel of the Regular Navy and the Naval Reserve is provided in this training manual. The chapters outline the qualifications necessary and the responsibilities of Aircrew Survival Equipmentmen involved in blueprint reading and the development of…

  13. IC [Interior Communications] Electrician 3 and 2: Rate Training Manual. Revised.

    ERIC Educational Resources Information Center

    Naval Education and Training Command, Pensacola, FL.

    The rate training manual provides information related to the tasks assigned to the Interior Communications (IC) Electricians Third and Second Class who operate and maintain the interior communications systems and associated equipment. Chapter one discusses career challenges for the IC Electrician in terms of responsibilities, advancement…

  14. Emergency Victim Care. A Training Manual for Emergency Medical Technicians. Module 13--Extrication from Automobiles. Revised.

    ERIC Educational Resources Information Center

    Ohio State Dept. of Education, Columbus. Div. of Vocational Education.

    This training manual for emergency medical technicians, one of 14 modules that comprise the Emergency Victim Care textbook, covers extrication of victims from automobiles. Objectives stated for the chapter are for the student to be able to describe how to use extrication equipment properly and the correct use of the long and short backboards to…

  15. Aviation Boatswain's Mate H 1 and C. NAVPERS 10303-B. Rate Training Manual.

    ERIC Educational Resources Information Center

    Bureau of Naval Personnel, Washington, DC.

    A guide for advancement of Navy personnel in the Aviation Boatswain's Mate H (ABH) rating is provided in this self-study training manual. The chapters outline the qualifications and responsibilities of Aviation Boatswains involved in aircraft handling equipment, aircraft handling, aircraft crashes, firefighting, crew entrapment, shipboard…

  16. Tradevman 3 and 2: Naval Rate Training Manual and Nonresident Career Course.

    ERIC Educational Resources Information Center

    Naval Education and Training Command, Pensacola, FL.

    The rate training manual is designed as a self-study text for Navy and Naval Reserve personnel preparing for advancement to Petty Officer Third Class (TD 3) to Second Class (TD 2) in the rating of Tradevman. Chapter 1 provides information on the enlisted rating structure, the TD rating, requirements and procedures for advancement, study references…

  17. So You Want To Start an Alternative School! A How-To-Do-It Manual.

    ERIC Educational Resources Information Center

    Ingram, Judith K.

    The practical steps outlined in this manual are based on the experience of establishing Marquette (Michigan) Alternative Senior High (MASH), organized in 1978 to serve rural youth who had dropped out or were not benefiting significantly from the regular high school programs. Chapters are organized in chronological progression and each refers to…

  18. Forestry Manual for Vocational Agriculture Instructors. 1976 Revision. Bulletin No. 7001.

    ERIC Educational Resources Information Center

    Wisconsin State Dept. of Public Instruction, Madison. Div. of Instructional Services.

    The ten chapters included in this forestry manual for vocational agriculture instructors are grouped into three parts. A course outline precedes part 1 and assists the teacher by providing performance objectives, major concepts to be developed, a subject matter outline, motivational ideas, suggested learning activities, and a list of resource…

  19. Ucebnoe posobie dlja studentov pedagogiceskih institutov (Manual for Students of Teacher Training Institutes).

    ERIC Educational Resources Information Center

    Ogorodnikov, I. T.

    This document is an English-language abstract (approximately 1,500 words) of a book recommended for publication by the jury of the open competition for educational manuals to be used in teacher training institutes; it is designed for the Soviet educational theory course for general secondary school teachers. The five chapters deal with the subject…

  20. Emergency Victim Care. A Training Manual for Emergency Medical Technicians. Module 11--Childbirth, Pediatric Emergencies. Revised.

    ERIC Educational Resources Information Center

    Ohio State Dept. of Education, Columbus. Div. of Vocational Education.

    This training manual for emergency medical technicians, one of 14 modules that comprise the Emergency Victim Care textbook, covers childbirth and pediatric emergencies. Objectives stated for the two chapters are for the students to be able to describe: emergency procedures for normal childbirth, unusual childbirth emergencies, emergency care for…

  1. The Owner's Manual for the Brain: Everyday Applications from Mind-Brain Research. Second Edition.

    ERIC Educational Resources Information Center

    Howard, Pierce J.

    This book discusses what is known about the brain and memory storage and how people can improve their recall of information. There are 10 parts with 37 chapters. Part 1, "Forming a Foundation: The Context for Using Your Owner's Manual," includes topics like brain basics and brain imaging. Part 2, "Wellness: Getting the Most Out of Every Day,"…

  2. Support Assistants for Fire Emergencies; Student Manual, Part B. Firefighting for Civil Defense Emergencies.

    ERIC Educational Resources Information Center

    International Association of Fire Chiefs, New York, NY.

    A course designed to develop performance capabilities in the student of the fire service is presented in a manual. Each chapter is designed to give the student a basic understanding of the material covered in class. Specific objectives are: (1) To train "Support Assistant" B personnel to augment and assist firefighters, (2) To train personnel to…

  3. Support Assistants for Fire Emergencies; Student Manual, Part A. Firefighting for Civil Defense Emergencies.

    ERIC Educational Resources Information Center

    International Association of Fire Chiefs, New York, NY.

    A manual intended to help fire departments and Civil Defense organizations train people to support regular fire forces during a national emergency is presented. It contains 11 chapters: Introduction, Modern Weapons and Radioactive Fallout, Role of Fire Service in Civil Defense, Local Fire Department Organization, Role of Support Assistants in…

  4. Standard First Aid Training Course. Naval Education and Training Command Rate Training Manual.

    ERIC Educational Resources Information Center

    Naval Education and Training Command, Washington, DC.

    This first aid manual is designed to serve as basic first aid instructional materials for all nonmedical naval personnel. Chapters are included on the following topics: basic life support, hemorrhage, shock, wounds, injuries, drug abuse, poisoning, common medical emergencies, NBC (nuclear, biological, chemical) agent casualties, and rescue and…

  5. Construction Mechanic 3 & 2. Naval Education and Training Command Rate Training Manual and Nonresident Career Course.

    ERIC Educational Resources Information Center

    Naval Education and Training Command, Washington, DC.

    Designed for individual study and nonformal classroom instruction, this Navy training manual provides subject matter that relates to the occupational standards of the construction mechanic rating. Each chapter includes line drawings, diagrams, and photos illustrating the subject matter. Subjects covered include the following: preparation for…

  6. Manual of First-Aid Practices for School Bus Drivers. Revised.

    ERIC Educational Resources Information Center

    Nesbitt, William R.

    This manual is intended to provide California school bus drivers with the required course of instruction in first aid practices. It deals with the basic principles of handling serious medical emergencies, but major emphasis is on the variety of minor injuries or illnesses that may occur while students are riding on school buses. Chapter 1 covers…

  7. Emergency Victim Care. A Training Manual for Emergency Medical Technicians. Module 7--Medical Emergencies. Revised.

    ERIC Educational Resources Information Center

    Ohio State Dept. of Education, Columbus. Div. of Vocational Education.

    This training manual for emergency medical technicians, one of 14 modules that comprise the Emergency Victim Care textbook, covers medical emergencies. The objectives for the chapter are for students to be able to describe the causes, signs, and symptoms for specified medical emergencies and to describe emergency care for them. Informative…

  8. The Photonovel: A Tool for Development. Program and Training Journal Manual Series Number 4.

    ERIC Educational Resources Information Center

    Weaks, Daniel

    Designed as a working and teaching tool for development workers, this manual includes the step-by-step process for preparing a photonovel. Chapter 1 introduces the photonovel, a blend of comic book and motion picture that substitutes photographs for the stylized drawings. It lists its advantages and disadvantages as an educational medium and tool…

  9. Electrician's Mate 3 & 2. Rate Training Manual and Nonresident Career Course.

    ERIC Educational Resources Information Center

    Gallant, Thomas E.; Hawley, John F.

    This Rate Training Manual (Textbook) and Nonresident Career Course form a correspondence, self-study package to provide information related to tasks assigned to the Electrician's Mate Third and Second Class. Focus is on operating and maintaining power and lighting systems and associated equipment. The 16 chapters in the text are (1) The…

  10. Aviation Support Equipment Technician M 3 & 2. Rate Training Manual and Nonresident Career Course.

    ERIC Educational Resources Information Center

    Naval Education and Training Command, Pensacola, FL.

    One of a series of training manuals prepared for enlisted personnel in the Navy and Naval Reserve, this self-study unit relates directly to the occupational qualifications of the Aviation Support Equipment Technician M rating. Contents include a 15-chapter text followed by a subject index, qualifications for advancement, and the associated…

  11. Aerographer's Mate 3 & 2. Rate Training Manual and Nonresident Career Course.

    ERIC Educational Resources Information Center

    Naval Education and Training Command, Pensacola, FL.

    One of a series of training manuals prepared for enlisted personnel in the Navy and Naval Reserve, this self-study package provides subject matter that relates directly to the occupational qualifications of the Aerographer's Mate rating. Contents include a 17-chapter text, a 15-item appendix followed by a subject index and the associated…

  12. When I Was Hungry. A Hunger Course for High School Students. Teacher's Manual [and] Action Packet.

    ERIC Educational Resources Information Center

    Bread for the World Educational Fund, Washington, DC.

    Designed to accompany a student activity packet on issues related to world hunger, this teacher's manual provides 12 units of study at the high school level. Materials are presented from a Christian perspective. The following topics are covered in separate chapters: introduction (justice and the right to food), the dimensions and scope of the…

  13. 78 FR 29559 - 2013 Amendments to the Manual for Courts-Martial, United States

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-21

    ... the Manual for Courts-Martial, United States By the authority vested in me as President by the Constitution and the laws of the United States of America, including chapter 47 of title 10, United States Code... for Courts-Martial, United States, prescribed by Executive Order 12473, as amended, it is...

  14. Personal and Family Survival. Civil Defense Adult Education Course Student Manual.

    ERIC Educational Resources Information Center

    Office of Civil Defense (DOD), Washington, DC.

    A manual providing general orientation on the subject of United States civil defense is presented. It can serve as a home reference and as a tool for an adult education class. The nine chapters are: U.S. Civil Defense, Modern Weapons and Radioactive Fallout, Public Fallout Shelters, Fallout Shelter Occupancy, Fallout Protection at Home, Community…

  15. Equipment Operator 3 and 2. NAVTRA 10640-G. Rate Training Manual.

    ERIC Educational Resources Information Center

    Bureau of Naval Personnel, Washington, DC.

    A guide for advancement and training in the Equipment Operator 3 and 2 ratings for Navy personnel is provided in this manual. The chapters outline the duties and responsibilities of the equipment operators involved with engines, fuels, lubricants, pollution control, automotive power trains and chassis, automotive vehicles, materials-handling…

  16. Planning Manual for School-Age Child Care in New Mexico.

    ERIC Educational Resources Information Center

    Rainhart, Dolly

    This manual was designed to assist concerned individuals and organizations within communities in New Mexico to develop and plan effective school-age child care programs. Emphasized are the first steps in initiating and implementing school-age child care in a community. Chapter I discusses the need for school-age child care programs and the…

  17. Health and Safety in the School Environment. A Manual of Recommended Practice.

    ERIC Educational Resources Information Center

    Center for Disease Control (DHEW/PHS), Atlanta, GA.

    This manual emphasizes the health relationships in the physical school environment and provides environmental criteria by which existing or planned facilities can be evaluated. Individual chapters deal with school health programs; planning for new schools; school site selection, building plan, and plan review; water supply; plumbing; sewage…

  18. Journalist 1 & C. Rate Training Manual and Nonresident Career Course, Revised.

    ERIC Educational Resources Information Center

    Naval Education and Training Program Development Center, Pensacola, FL.

    Designed for self study, this publication contains information to aid Naval personnel in meeting the occupational standards for advancement to Journalist First Class and Chief Journalist. The first section, a "Rate Training Manual," is divided into 11 chapters: The Path to Advancement, Public Affairs Policy and Procedures, Public Affairs Office…

  19. Machinery Repairman 3 & 2. Rate Training Manual and Nonresident Career Course. Revised.

    ERIC Educational Resources Information Center

    Bynum, Michael H.; Taylor, Edward A.

    This Rate Training Manual (textbook) and Nonresident Career Course form a correspondence self-study package to teach the theoretical knowledge and mental skills needed by the Machinery Repairman Third Class and Second Class. The 15 chapters in the textbook are (1) Scope of the Machinery Repairman Rating; (2) Toolrooms and Tools; (3) Layout and…

  20. Manual of petroleum measurement standards. Chapter 7. 2: Dynamic temperature determination

    SciTech Connect

    Not Available

    1985-01-01

    This book describes the methods and practices used to obtain flowing temperature measurements using portable electronic thermometers in custody transfer of liquid hydrocarbons. It also covers blanketed tanks and tanks that have been inert and are under pressures of less than 3 pounds per square inch gage (21 kilopascals). It does not cover hydrocarbons under pressures in excess of 3 pounds per square inch gage or cryogenic temperature measurement.

  1. CHRPR Operations Manual

    SciTech Connect

    Windsor, Bradford T.; Woodring, Mitchell L.; Myjak, Mitchell J.

    2012-08-21

    proportional to the amplitude, via voltage to pulse width converters (VPW). These time widths are then digitized by a field programmable gate array (FPGA) and transmitted over Ethernet to a data acquisition computer. The CHRPR records the magnitude of each pulse to a continuous event mode file on or each detector and occupancy sensor This manual begins with CHRPR installation instructions, then a section on CHRPR software. Afterward is a brief overview of how the TSA system works, then an explanation of the CHRPR. This manual is meant as a supplement to the TSA VM-250AGN manual, which can be found at http://tsasystems.com/library/manuals/pm700agn-vm250agn_manual.pdf . That manual is the manufacturer’s guide for the installation, programming, and maintenance of the portal system.

  2. Emergency Response Manual

    NASA Technical Reports Server (NTRS)

    Barnett, Traci M.

    2004-01-01

    Safety and security is very important at NASA. The Security Management and Safeguards Office goal is ensure safety and security for all NASA Lewis and Plum Brook Station visitors and workers. The office protects against theft, sabotage, malicious damage, espionage, and other threats or acts of violence. There are three types of security at NASA: physical, IT, and personnel. IT is concerned with sensitive and classified information and computers. Physical security includes the officers who check visitors and workers in and patrol the facility. Personnel security is concerned with background checks during hiring. During my internship, I met people from and gained knowledge about all three types of security. I primarily worked with Dr. Richard Soppet in physical security. During my experience with physical security, I observed and worked with many aspects of it. I attended various security meetings at both NASA Lewis and Plum Brook. The meetings were about homeland security and other improvements that will be made to both facilities. I also spent time with a locksmith. The locksmith makes copies of keys and unlocks doors for people who need them. I rode around in a security vehicle with an officer as he patrolled. I also observed the officer make a search of a visitor s vehicle. All visitors vehicles are searched upon entering NASA. I spent time and observed in the dispatch office. The officer answers calls and sends out officers when needed. The officer also monitors the security cameras. My primary task was completing an emergency response manual. This manual would assist local law enforcement and fire agencies in case of an emergency. The manual has pictures and descriptions of the buildings. It also contains the information about hazards inside of the buildings. This information will be very helpul to law enforcement so that when called upon during an emergency, they will not create an even bigger problem with collateral damage.

  3. MAP user's manual copyright

    SciTech Connect

    Pillsbury, R.D. Jr.

    1991-12-01

    The program MITMAP represents a set of general purpose, two- dimensional, finite element programs for the calculation of magnetic fields. It consists of the program MAP and MAP2DJ. The two programs are used to solve different electromagnetic problems, but they have a common set of subrountines for pre- and postprocessing. Originally separate programs, they have been combined to make modification easier. The manuals, however, will remain separate. The program MAP is described in this manual. MAP is applicable to the class of problems with two-dimensional-planar or axisymmetric - geometries, in which the current density and the magnetic vector potential have only a single nonvanishing component. The single component is associated with the direction that is perpendicular to the plane of the problem and is invariant with respect to that direction. Maxwell's equations can be reduced to a solver diffusion equation in terms of the single, nonvanishing component of the magnetic vector potential for planar problems and to a single component of a vector potential for planar problems and to a single component of a vector diffusion equation for axisymmetric problems. The magnetic permeability appears in the governing equation. The permeability may be a function of the magnetic flux density. In addition, any electrically conducting material present will have eddy currents induced by a time varying magnetic field. These eddy currents must be included in the solution process. This manual provides a description of the structure of the input data and output for the program. There are several example problems presented that illustrate the major program features. Appendices are included that contain a derivation of the governing equations and the application of the finite element method to the solution of the equations.

  4. Stimulation model for lenticular sands: Volume 2, Users manual

    SciTech Connect

    Rybicki, E.F.; Luiskutty, C.T.; Sutrick, J.S.; Palmer, I.D.; Shah, G.H.; Tomutsa, L.

    1987-07-01

    This User's Manual contains information for four fracture/proppant models. TUPROP1 contains a Geertsma and de Klerk type fracture model. The section of the program utilizing the proppant fracture geometry data from the pseudo three-dimensional highly elongated fracture model is called TUPROPC. The analogous proppant section of the program that was modified to accept fracture shape data from SA3DFRAC is called TUPROPS. TUPROPS also includes fracture closure. Finally there is the penny fracture and its proppant model, PENNPROP. In the first three chapters, the proppant sections are based on the same theory for determining the proppant distribution but have modifications to support variable height fractures and modifications to accept fracture geometry from three different fracture models. Thus, information about each proppant model in the User's Manual builds on information supplied in the previous chapter. The exception to the development of combined treatment models is the penny fracture and its proppant model. In this case, a completely new proppant model was developed. A description of how to use the combined treatment model for the penny fracture is contained in Chapter 4. 2 refs.

  5. TALENT user's manual.

    SciTech Connect

    Merchant, Bion John

    2012-01-01

    The Ground-Based Monitoring R and E Component Evaluation project performs testing on the hardware components that make up Seismic and Infrasound monitoring systems. The majority of the testing is focused on the Digital Waveform Recorder (DWR), Seismic Sensor, and Infrasound Sensor. The software tool used to capture and analyze the data collected from testing is called TALENT: Test and Analysis Evaluation Tool. This document is the manual for using TALENT. Other reports document the testing procedures that are in place (Kromer, 2007) and the algorithms employed in the test analysis (Merchant, 2011).

  6. SHAFT79 user's manual

    SciTech Connect

    Pruess, K.; Schroeder, R.C.

    1980-03-01

    SHAFT79 (Simultaneous Heat And Fluid Transport) is an integrated finite difference program for computing two-phase non-isothermal flow in porous media. The principal application for which SHAFT79 is designed is in geothermal reservoir simulation. SHAFT79 solves the same equations as an earlier version, called SHAFT78, but uses much more efficient mathematical and numerical methods. The present SHAFT79 user's manual gives a brief account of equations and numerical methods and then describes in detail how to set up input decks for running the program. The application of SHAFT79 is illustrated by means of a few sample problems. (MHR)

  7. TIA Software User's Manual

    NASA Technical Reports Server (NTRS)

    Cramer, K. Elliott; Syed, Hazari I.

    1995-01-01

    This user's manual describes the installation and operation of TIA, the Thermal-Imaging acquisition and processing Application, developed by the Nondestructive Evaluation Sciences Branch at NASA Langley Research Center, Hampton, Virginia. TIA is a user friendly graphical interface application for the Macintosh 2 and higher series computers. The software has been developed to interface with the Perceptics/Westinghouse Pixelpipe(TM) and PixelStore(TM) NuBus cards and the GW Instruments MacADIOS(TM) input-output (I/O) card for the Macintosh for imaging thermal data. The software is also capable of performing generic image-processing functions.

  8. NASCAP programmer's reference manual

    NASA Technical Reports Server (NTRS)

    Mandell, M. J.; Stannard, P. R.; Katz, I.

    1993-01-01

    The NASA Charging Analyzer Program (NASCAP) is a computer program designed to model the electrostatic charging of complicated three-dimensional objects, both in a test tank and at geosynchronous altitudes. This document is a programmer's reference manual and user's guide. It is designed as a reference to experienced users of the code, as well as an introduction to its use for beginners. All of the many capabilities of NASCAP are covered in detail, together with examples of their use. These include the definition of objects, plasma environments, potential calculations, particle emission and detection simulations, and charging analysis.

  9. RADTRAN 6 Technical Manual

    SciTech Connect

    Weiner, Ruth F.; Neuhauser, Karen Sieglinde; Heames, Terence John; O'Donnell, Brandon M.; Dennis, Matthew L.

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  10. RADTRAN 6 technical manual.

    SciTech Connect

    Weiner, Ruth F.; Neuhauser, Karen Sieglinde; Heames, Terence John; O'Donnell, Brandon M.; Dennis, Matthew L.

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  11. Chemical Processing Manual

    NASA Technical Reports Server (NTRS)

    Beyerle, F. J.

    1972-01-01

    Chemical processes presented in this document include cleaning, pickling, surface finishes, chemical milling, plating, dry film lubricants, and polishing. All types of chemical processes applicable to aluminum, for example, are to be found in the aluminum alloy section. There is a separate section for each category of metallic alloy plus a section for non-metals, such as plastics. The refractories, super-alloys and titanium, are prime candidates for the space shuttle, therefore, the chemical processes applicable to these alloys are contained in individual sections of this manual.

  12. Astronaut training manual

    NASA Technical Reports Server (NTRS)

    Coleman, E. A.

    1980-01-01

    Scientific information from previous space flights, space medicine, exercise physiology, and sports medicine was used to prepare a physical fitness manual suitable for use by members of the NASA astronaut population. A variety of scientifically valid exercise programs and activities suitable for the development of physical fitness are provided. Programs, activities, and supportive scientific data are presented in a concise, easy to read format so as to permit the user to select his or her mode of training with confidence and devote time previously spent experimenting with training routines to preparation for space flight. The programs and activities included were tested and shown to be effective and enjoyable.

  13. Training Manual for Elements of Interface Definition and Control

    NASA Technical Reports Server (NTRS)

    Lalli, Vincent R. (Editor); Kastner, Robert E. (Editor); Hartt, Henry N. (Editor)

    1997-01-01

    The primary thrust of this manual is to ensure that the format and information needed to control interfaces between equipment are clear and understandable. The emphasis is on controlling the engineering design of the interface and not on the functional performance requirements of the system or the internal workings of the interfacing equipment. Interface control should take place, with rare exception, at the interfacing elements and no further. There are two essential sections of the manual. Chapter 2, Principles of Interface Control, discusses how interfaces are defined. It describes different types of interfaces to be considered and recommends a format for the documentation necessary for adequate interface control. Chapter 3, The Process: Through the Design Phases, provides tailored guidance for interface definition and control. This manual can be used to improve planned or existing interface control processes during system design and development. It can also be used to refresh and update the corporate knowledge base. The information presented herein will reduce the amount of paper and data required in interface definition and control processes by as much as 50 percent and will shorten the time required to prepare an interface control document. It also highlights the essential technical parameters that ensure that flight subsystems will indeed fit together and function as intended after assembly and checkout.

  14. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect

    Rathbone, Bruce A.

    2007-03-12

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. Rev. 0 marks the first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database. Revision numbers that are whole numbers reflect major revisions typically involving changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document. Revision Log: Rev. 0 (2/25/2005) Major revision and expansion. Rev. 0.1 (3/12/2007) Minor

  15. Geological Survey Research 1966, Chapter A

    USGS Publications Warehouse

    ,

    1966-01-01

    'Geological Survey Research 1966' is the seventh annual review of the econamic and scientific work of the U.S. Geological Survey. As in previous years the purpose of the volume is to make available promptly to the public the highlights of Survey investigations. This year the volume consists of 4 chapters (A through D) of Professional Paper 550. Chapter A contains a summary of significant results, and the remaining chapters are made up of collections of short technical papers. Many of the results summarized in chapter A are discussed in greater detail in the short papers or in reports listed in 'Publications in Fiscal Year 1966,' beginning on page A265. The tables of contents for chapters B through D are listed on pages A259-A264. Numerous Federal, State, county, and municipal agencies listed on pages A211-A215 cooperated financially with the Geological Survey during fiscal 1966 and have contributed significantly to the results reported here. They are identified where appropriate in the short technical papers that have appeared in Geological Survey Research and in papers published cooperatively, but generally are not identified in the brief statements in chapter A. Many individuals on the staff of the Geological Survey have contributed to 'Geological Survey Research 1966.' Reference is made to only a few. Frank W. Trainer, Water Resources Division, was responsible for organizing and assembling chapter A and for critical review of papers in chapters B-D, assisted by Louis Pavlides, Geologic Division. Marston S. Chase, Publications Division, was in charge of production aspects of the series, assisted by Jesse R. Upperco in technical editing, and William H. Elliott and James R. Hamilton in planning and preparing illustrations. The volume for next year, 'Geological Survey Research 1967,' will be published as chapters af Professional Paper 5715. Previous volumes are listed below, with their series designations. Gealagical Survey Research 1960-Prof. Paper 400 Gealagical

  16. Radiological control manual. Revision 1

    SciTech Connect

    Kloepping, R.

    1996-05-01

    This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPP and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP.

  17. HOV system manual. Final report

    SciTech Connect

    1998-12-31

    This report is a comprehensive and detailed HOV (High-Occupancy Vehicle) Systems Manual that incorporates current guidelines and practices. The contents of this Manual are, therefore, of immediate interest to both highway and transit professionals in planning, designing, implementing, operating, marketing, and enforcing HOV systems. The Manual is also useful to those charged with achieving air-quality and congestion-management goals as well as policy makers.

  18. FUGM hardware operation manual

    SciTech Connect

    Wenz, T.R.; Menlove, H.O.; Halbig, J.K.

    1997-05-01

    This manual describes the detector design features, performance, and operating characteristics of the Fugen reactor gate monitor for monitoring fresh and spent fuel transfers between the core and storage ponds. This system consists of two monitors located at each end of the transfer chute. The larger monitor contains two {sup 3}He tubes, two fission chambers, and two ion chambers. The smaller monitor, used for direction of motion redundancy, contains two ion chambers. All detectors provide information for identifying the type, fresh or spent UOX or MOX fuel, and direction of the fuel transfer. The gamma-ray and neutron detector (GRAND-3) electronics package supplies power to the radiation sensors and collects the radiation data for storage on a laptop computer. The system is designed to operate unattended with data collection by the inspectors occurring on 90-day time intervals. This manual also includes radiation data for the six types of fuel transfers and equipment transfers along with the direction of motion information collected during the installation at the Fugen reactor.

  19. ARDS User Manual

    NASA Technical Reports Server (NTRS)

    Fleming, David P.

    2001-01-01

    Personal computers (PCs) are now used extensively for engineering analysis. their capability exceeds that of mainframe computers of only a few years ago. Programs originally written for mainframes have been ported to PCs to make their use easier. One of these programs is ARDS (Analysis of Rotor Dynamic Systems) which was developed at Arizona State University (ASU) by Nelson et al. to quickly and accurately analyze rotor steady state and transient response using the method of component mode synthesis. The original ARDS program was ported to the PC in 1995. Several extensions were made at ASU to increase the capability of mainframe ARDS. These extensions have also been incorporated into the PC version of ARDS. Each mainframe extension had its own user manual generally covering only that extension. Thus to exploit the full capability of ARDS required a large set of user manuals. Moreover, necessary changes and enhancements for PC ARDS were undocumented. The present document is intended to remedy those problems by combining all pertinent information needed for the use of PC ARDS into one volume.

  20. MELCOR computer code manuals

    SciTech Connect

    Summers, R.M.; Cole, R.K. Jr.; Smith, R.C.; Stuart, D.S.; Thompson, S.L.; Hodge, S.A.; Hyman, C.R.; Sanders, R.L.

    1995-03-01

    MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. MELCOR is being developed at Sandia National Laboratories for the U.S. Nuclear Regulatory Commission as a second-generation plant risk assessment tool and the successor to the Source Term Code Package. A broad spectrum of severe accident phenomena in both boiling and pressurized water reactors is treated in MELCOR in a unified framework. These include: thermal-hydraulic response in the reactor coolant system, reactor cavity, containment, and confinement buildings; core heatup, degradation, and relocation; core-concrete attack; hydrogen production, transport, and combustion; fission product release and transport; and the impact of engineered safety features on thermal-hydraulic and radionuclide behavior. Current uses of MELCOR include estimation of severe accident source terms and their sensitivities and uncertainties in a variety of applications. This publication of the MELCOR computer code manuals corresponds to MELCOR 1.8.3, released to users in August, 1994. Volume 1 contains a primer that describes MELCOR`s phenomenological scope, organization (by package), and documentation. The remainder of Volume 1 contains the MELCOR Users Guides, which provide the input instructions and guidelines for each package. Volume 2 contains the MELCOR Reference Manuals, which describe the phenomenological models that have been implemented in each package.

  1. Automated manual transmission controller

    DOEpatents

    Lawrie, Robert E.; Reed, Jr., Richard G.; Bernier, David R.

    1999-12-28

    A powertrain system for a hybrid vehicle. The hybrid vehicle includes a heat engine, such as a diesel engine, and an electric machine, which operates as both an electric motor and an alternator, to power the vehicle. The hybrid vehicle also includes a manual-style transmission configured to operate as an automatic transmission from the perspective of the driver. The engine and the electric machine drive an input shaft which in turn drives an output shaft of the transmission. In addition to driving the transmission, the electric machine regulates the speed of the input shaft in order to synchronize the input shaft during either an upshift or downshift of the transmission by either decreasing or increasing the speed of the input shaft. When decreasing the speed of the input shaft, the electric motor functions as an alternator to produce electrical energy which may be stored by a storage device. Operation of the transmission is controlled by a transmission controller which receives input signals and generates output signals to control shift and clutch motors to effect smooth launch, upshift shifts, and downshifts of the transmission, so that the transmission functions substantially as an automatic transmission from the perspective of the driver, while internally substantially functioning as a manual transmission.

  2. Preliminary report on the geology, geophysics and hydrology of USBM/AEC Colorado core hole No. 2, Piceance Creek Basin, Rio Blanco County, Colorado

    USGS Publications Warehouse

    Ege, J.R.; Carroll, R.D.; Welder, F.A.

    1967-01-01

    Approximately 1,400 feet of continuous core was taken .between 800-2,214 feet in depth from USBM/AEC Colorado core hole No. 2. The drill, site is located in the Piceance Creek basin, Rio Blanco County, Colorado. From ground surface the drill hole penetrated 1,120 feet of the Evacuation Creek Member and 1,094 feet of oil shale in the Parachute Creek Member of the Green River Formation. Oil shale yielding more than 20 gallons per ton occurs between 1,260-2,214 feet in depth. A gas explosion near the bottom of the hole resulted in abandonment of the exploratory hole which was still in oil shale. The top of the nahcolite zone is at 1,693 feet. Below this depth the core contains common to abundant amounts of sodium bicarbonate salt intermixed with oil shale. The core is divided into seven structural zones that reflect changes in joint intensity, core loss and broken core due to natural causes. The zone of poor core recovery is in the Interval between 1,300-1,450 feet. Results of preliminary geophysical log analyses indicate that oil yields determined by Fischer assay compare favorably with yields determined by geophysical log analyses. There is strong evidence that analyses of complete core data from Colorado core holes No. 1 and No. 2 reveal a reliable relationship between geophysical log response and oil yield. The quality of the logs is poor in the rich shale section and the possibility of repeating the logging program should be considered. Observations during drilling, coring, and hydrologic testing of USBM/AEC Colorado core hole No. 2 reveal that the Parachute Creek Member of the Green River Formation is the principal aquifer water in the Parachute Creek Member is under artesian pressure. The upper part of the aquifer has a higher hydrostatic head than, and is hydrologically separated from the lower part of the aquifer. The transmissibility of the aquifer is about 3500 gpd per foot. The maximum water yield of the core hole during testing was about 500 gpm. Chemical

  3. Marine West Coast Forests, Chapter 9

    USGS Publications Warehouse

    Perakis, Steven S.; Geiser, Linda H.; Lilleskov, Erik A.; Pardo, Linda H.; Robin-Abbott, Molly J.; Driscoll, Charles T.

    2011-01-01

    Human activities have greatly increased nitrogen emissions and deposition across large areas of Earth. Although nitrogen is an essential nutrient for plant growth, too much nitrogen in excess of critical loads leads to losses of biodiversity, soil and stream acidification, nutrient imbalances, and other deleterious effects. In a new report quantifying critical loads of nitrogen deposition across the United States, USGS scientist Steve Perakis and co-authors provided a chapter about responses of marine west coast forests. Much of this region is understudied with respect to nitrogen deposition, and in this chapter the authors identify known adverse effects and estimate critical loads of nitrogen deposition for western Oregon and Washington and southeast Alaska forests. Perakis also contributed to the synthesis chapter, which includes background, objectives, advantages and uncertainties of critical loads, an overview of critical loads across U.S. ecoregions, and other topics.

  4. Secondary School Mathematics, Chapter 21, Rigid Motions and Vectors, Chapter 22, Computers and Programs. Student's Text.

    ERIC Educational Resources Information Center

    Stanford Univ., CA. School Mathematics Study Group.

    Transformation geometry topics are covered in one chapter of Unit 11 of this SMSG series. Work with translations, reflections, rotations, and composition of motions is included; vectors are briefly discussed. The chapter on computers and programming deals with recent history and uses of of the computer, organization of a digital computer, an…

  5. [Biennial Survey of Education, 1926-1928. Bulletin, 1930, No. 16. Chapter I - Chapter XX

    ERIC Educational Resources Information Center

    Office of Education, United States Department of the Interior, 1930

    1930-01-01

    This document contains the first twenty chapters of the Biennial Survey of Education document, covering the years 1926-1928. The following chapters are included in this document: (1) Higher education (Arthur J. Klein); (2) Medical education (N. P. Colwell); (3) Legal education (Alfred Z. Reed); (4) Significant movements in city school systems (W.…

  6. Report of the Chapter 1 Sustained Effects Study. Elementary and Secondary Education Act--Chapter 1.

    ERIC Educational Resources Information Center

    Donaldson, William S.

    School districts receiving Chapter 1 funds are to conduct a study of sustained effects once every 3 years and to use the results for planning future Chapter 1 programs. As part of this effort, the Columbus (Ohio) public schools conducted pretest-to-posttest, posttest-to-sustained effect, and pretest-to-sustained effect studies of 4,031 students in…

  7. Secondary School Mathematics, Chapter 13, Perpendiculars and Parallels (I), Chapter 14, Similarity. Student's Text.

    ERIC Educational Resources Information Center

    Stanford Univ., CA. School Mathematics Study Group.

    The first chapter of the seventh unit in this SMSG series discusses perpendiculars and parallels; topics covered include the relationship between parallelism and perpendicularity, rectangles, transversals, parallelograms, general triangles, and measurement of the circumference of the earth. The second chapter, on similarity, discusses scale…

  8. Secondary School Mathematics, Chapter 27, Logic, Chapter 28, Applications of Probability and Statistics. Student's Text.

    ERIC Educational Resources Information Center

    Stanford Univ., CA. School Mathematics Study Group.

    One chapter in the fourteenth unit of this SMSG series deals with logic; simple and compound statements, truth tables, logical equivalence, rules of a logical argument, proof, quantifiers, and negations are the topics covered. The second chapter of the unit discusses applications of probability and statistics, including random sampling,…

  9. Secondary School Mathematics, Chapter 17, Perpendiculars and Parallels (II), Chapter 18, Coordinate Geometry. Student's Text.

    ERIC Educational Resources Information Center

    Stanford Univ., CA. School Mathematics Study Group.

    The first chapter, Perpendiculars and Parallels (II), of the ninth unit in this SMSG series includes a discussion of the properties of triangles, circles and perpendiculars, parallels in space, perpendicular lines and planes, and parallel planes. The next chapter, on coordinate geometry, covers distance; midpoints; algebraic descriptions of…

  10. Camp Health Aide Manual = Manual para trabajadores de salud.

    ERIC Educational Resources Information Center

    Robinson, June Grube; And Others

    This bilingual manual serves as a textbook for migrant Camp Health Aides. Camp Health Aides are members of migrant labor camps enlisted to provide information about health and social services to migrant workers and their families. The manual is divided into 12 tabbed sections representing lessons. Teaching notes printed on contrasting paper…

  11. Rivet user manual

    NASA Astrophysics Data System (ADS)

    Buckley, Andy; Butterworth, Jonathan; Grellscheid, David; Hoeth, Hendrik; Lönnblad, Leif; Monk, James; Schulz, Holger; Siegert, Frank

    2013-12-01

    This is the manual and user guide for the Rivet system for the validation and tuning of Monte Carlo event generators. As well as the core Rivet library, this manual describes the usage of the rivet program and the AGILe generator interface library. The depth and level of description is chosen for users of the system, starting with the basics of using validation code written by others, and then covering sufficient details to write new Rivet analyses and calculational components. Catalogue identifier: AEPS_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEPS_v1_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 571126 No. of bytes in distributed program, including test data, etc.: 4717522 Distribution format: tar.gz Programming language: C++, Python. Computer: PC running Linux, Mac. Operating system: Linux, Mac OS. RAM: 20 MB Classification: 11.9, 11.2. External routines: HepMC (https://savannah.cern.ch/projects/hepmc/), GSL (http://www.gnu.org/software/gsl/manual/gsl-ref.html), FastJet (http://fastjet.fr/), Python (http://www.python.org/), Swig (http://www.swig.org/), Boost (http://www.boostsoftware.com/), YAML (http://www.yaml.org/spec/1.2/spec.html) Nature of problem: Experimental measurements from high-energy particle colliders should be defined and stored in a general framework such that it is simple to compare theory predictions to them. Rivet is such a framework, and contains at the same time a large collection of existing measurements. Solution method: Rivet is based on HepMC events, a standardised output format provided by many theory simulation tools. Events are processed by Rivet to generate histograms for the requested list of analyses, incorporating all experimental phase space cuts and histogram definitions. Restrictions: Cannot calculate

  12. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect

    Rathbone, Bruce A.

    2010-04-01

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at the U.S. Department of Energy (DOE) Hanford site. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with requirements of 10 CFR 835, the DOE Laboratory Accreditation Program, the DOE Richland Operations Office, DOE Office of River Protection, DOE Pacific Northwest Office of Science, and Hanford’s DOE contractors. The dosimetry system is operated by the Pacific Northwest National Laboratory (PNNL) Hanford External Dosimetry Program which provides dosimetry services to PNNL and all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision

  13. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect

    Rathbone, Bruce A.

    2011-04-04

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at the U.S. Department of Energy (DOE) Hanford site. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with requirements of 10 CFR 835, the DOE Laboratory Accreditation Program, the DOE Richland Operations Office, DOE Office of River Protection, DOE Pacific Northwest Office of Science, and Hanford’s DOE contractors. The dosimetry system is operated by the Pacific Northwest National Laboratory (PNNL) Hanford External Dosimetry Program which provides dosimetry services to PNNL and all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision

  14. CONVEX mini manual

    NASA Technical Reports Server (NTRS)

    Tennille, Geoffrey M.; Howser, Lona M.

    1993-01-01

    The use of the CONVEX computers that are an integral part of the Supercomputing Network Subsystems (SNS) of the Central Scientific Computing Complex of LaRC is briefly described. Features of the CONVEX computers that are significantly different than the CRAY supercomputers are covered, including: FORTRAN, C, architecture of the CONVEX computers, the CONVEX environment, batch job submittal, debugging, performance analysis, utilities unique to CONVEX, and documentation. This revision reflects the addition of the Applications Compiler and X-based debugger, CXdb. The document id intended for all CONVEX users as a ready reference to frequently asked questions and to more detailed information contained with the vendor manuals. It is appropriate for both the novice and the experienced user.

  15. OSH technical reference manual

    SciTech Connect

    Not Available

    1993-11-01

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  16. FRMAC Operations Manual

    SciTech Connect

    Frandsen, K.

    2010-05-01

    In the event of a major radiological incident, the Federal Radiological Monitoring and Assessment Center (FRMAC) will coordinate the federal agencies that have various statutory responsibilities. The FRMAC is responsible for coordinating all environmental radiological monitoring, sampling, and assessment activities for the response. This manual describes the FRMAC’s response activities in a radiological incident. It also outlines how FRMAC fits in the National Incident Management System (NIMS) under the National Response Framework (NRF) and describes the federal assets and subsequent operational activities which provide federal radiological monitoring and assessment of the affected areas. In the event of a potential or existing major radiological incident, the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) is responsible for establishing and managing the FRMAC during the initial phases.

  17. HADES User's Manual

    SciTech Connect

    Aufderheide, M B; Slone, D M; Schach Von Wittenau, A E

    2002-12-26

    HADES is a computer code that simulates transmission radiography through a mesh and/or solid bodies. This code is a successor to an old code called XRAY. HADES is designed to be backward compatible with XRAY (i.e. it will accept and correctly parse XRAY input decks), but HADES has many more features that greatly enhance its versatility and its simulation of experimental effects. HADES can simulate X-Ray radiography, neutron radiography or GeV proton radiography using ray-tracing techniques. A short article has been published which discusses HADES' capabilities. HADES also has some capability for simulating pinhole imaging and backlight imaging. The best way to obtain HADES is to ask one of the authors for a copy. This manual covers all features in version 2.5.0 of HADES.

  18. Manual for solar specialists

    SciTech Connect

    Not Available

    1982-07-01

    The objective of the manual is to meet the specific training needs of code enforcement personnel in connection with the examination of plans for and the inspection of solar energy installations. There is a brief historical review and discussion of geographical dependence of solar feasibility. The fundamentals of solar energy are presented to establish the quantity of solar energy which can be anticipated in a particular geographic location. The active, passive, and hybrid solar systems are described, telling how insolation is collected, stored, and distributed by various means. The physical and theoretical components of solar systems are related to specific code enforcement techniques. Also, the recommended requirements to code officials for solar heating, cooling, and hot water systems are reviewed and discussed. (LEW)

  19. Accident prevention manual

    SciTech Connect

    Not Available

    1998-05-01

    Among the many common needs and goals are the safety and well-being of families, ourselves, fellow employees, and the continuing success of this organization. To these ends--minimizing human suffering and economic waste--the Bonneville Power Administration (BPA) Accident Prevention Program and this Accident Prevention Manual (APM) are dedicated. The BPA Accident Prevention Program is revised as necessary to ensure compliance with relevant Federal safety and health standards. The mandatory rules herein express minimum requirements for dealing with the principal hazards inherent in daily work activities. These and other written requirements, which neither can nor should provide complete coverage of all work situations, must be continually reinforced through the sound and mature safety judgments of all workers on each assigned task. In the event of conflicting judgments, the more conservative interpretation shall prevail pending review and resolution by management.

  20. GRSAC Users Manual

    SciTech Connect

    Ball, S.J.; Nypaver, D.J.

    1999-02-01

    An interactive workstation-based simulation code (GRSAC) for studying postulated severe accidents in gas-cooled reactors has been developed to accommodate user-generated input with ''smart front-end'' checking. Code features includes on- and off-line plotting, on-line help and documentation, and an automated sensitivity study option. The code and its predecessors have been validated using comparisons with a variety of experimental data and similar codes. GRSAC model features include a three-dimensional representation of the core thermal hydraulics, and optional ATWS (anticipated transients without scram) capabilities. The user manual includes a detailed description of the code features, and includes four case studies which guide the user through four different examples of the major uses of GRSAC: an accident case; an initial conditions setup and run; a sensitivity study; and the setup of a new reactor model.

  1. PASCAL/48 reference manual

    NASA Technical Reports Server (NTRS)

    Knight, J. C.; Hamm, R. W.

    1984-01-01

    PASCAL/48 is a programming language for the Intel MCS-48 series of microcomputers. In particular, it can be used with the Intel 8748. It is designed to allow the programmer to control most of the instructions being generated and the allocation of storage. The language can be used instead of ASSEMBLY language in most applications while allowing the user the necessary degree of control over hardware resources. Although it is called PASCAL/48, the language differs in many ways from PASCAL. The program structure and statements of the two languages are similar, but the expression mechanism and data types are different. The PASCAL/48 cross-compiler is written in PASCAL and runs on the CDC CYBER NOS system. It generates object code in Intel hexadecimal format that can be used to program the MCS-48 series of microcomputers. This reference manual defines the language, describes the predeclared procedures, lists error messages, illustrates use, and includes language syntax diagrams.

  2. FRMAC Assessment Manual

    SciTech Connect

    Clark, H.

    1999-12-01

    The ingestion pathway assessment procedures cited in the current version of the ``RMAC Assessment Manual'', DOE/NV/11718-061 (September 1996) have been superseded by new US Food and Drug Administration (FDA) guidance. This addendum replaces the obsolete procedures with a revised set based on the new guidance released by the FDA in August 1998. This addendum provides an overview of the new guidance, revised assessment methods, and assessment aids. It does not provide a general method of ingestion pathway analysis. The scope is limited to that covered by the new guidance titled, ``Accidental Radioactive Contamination of Human Food and Animal Feeds: Recommendations for State and Local Agencies,'' issued by the FDA in August 1998.

  3. Kinesiology Workbook and Laboratory Manual.

    ERIC Educational Resources Information Center

    Harris, Ruth W.

    This manual is written for students in anatomy, kinesiology, or introductory biomechanics courses. The book is divided into two sections, a kinesiology workbook and a laboratory manual. The two sections parallel each other in content and format. Each is divided into three corresponding sections: (1) Anatomical bases for movement description; (2)…

  4. Surface Water Treatment Workshop Manual.

    ERIC Educational Resources Information Center

    Ontario Ministry of the Environment, Toronto.

    This manual was developed for use at workshops designed to increase the knowledge of experienced water treatment plant operators. Each of the fourteen lessons in this document has clearly stated behavioral objectives to tell the trainee what he should know or do after completing that topic. Areas covered in this manual include: basic water…

  5. EKG Interpretation Program. Trainers Manual.

    ERIC Educational Resources Information Center

    Webb, Sandra M.

    This trainer's manual is designed to assist nursing instructors assigned to advanced medical surgical nursing courses in teaching students how to make basic interpretations of their patients' electrocardiographic (EKG) strips. Included in the manual are pre- and posttests and instructional units dealing with the following topics: EKG indicators,…

  6. Waste Water Plant Operators Manual.

    ERIC Educational Resources Information Center

    Washington State Coordinating Council for Occupational Education, Olympia.

    This manual for sewage treatment plant operators was prepared by a committee of operators, educators, and engineers for use as a reference text and handbook and to serve as a training manual for short course and certification programs. Sewage treatment plant operators have a responsibility in water quality control; they are the principal actors in…

  7. Missouri Secondary Science Safety Manual.

    ERIC Educational Resources Information Center

    Lemons, Judith L.

    The purpose of this safety manual is to provide a resource to help manage and minimize potential risks in science classrooms where students spend up to 60% of instructional time engaged in hands-on activities. This manual contains information on standards, legal aspects, and responsibilities for science safety; general laboratory safety for…

  8. Dental Chairside Technique. Student's Manual.

    ERIC Educational Resources Information Center

    Apfel, Maura; Weaver, Trudy Karlene

    This manual is part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. This student manual contains four units covering the following topics: local anesthesia; dental office emergencies; oral hygiene;…

  9. Dental Office Procedures. Student's Manual.

    ERIC Educational Resources Information Center

    Apfel, Maura; Weaver, Trudy Karlene

    This manual is part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. This student manual contains three units covering the following topics: ethics and jurisprudence; the appointment book; and…

  10. Child Nutrition Programs. Administrative Manual.

    ERIC Educational Resources Information Center

    Utah State Office of Education, Salt Lake City.

    Recognizing the importance of efficient and effective program administration for the success of Utah's Child Nutrition Programs, the State Office of Education developed a manual to assist local program administrators in using the U.S. Department of Agriculture's (USDA's) programs. This document contains Part 1 of the manual's four interrelated…

  11. Writing 139: An Instructor's Manual.

    ERIC Educational Resources Information Center

    Zimmerman, Ray, Ed.; And Others

    This instructor's manual is designed to improve the instructional support program for Writing 139, an interdisciplinary advanced composition class at the University of California, Irvine taught primarily by graduate student teaching assistants. After a brief history and overview of the course, the manual presents sections that address the…

  12. The Colorado Caravan Workshop Manual.

    ERIC Educational Resources Information Center

    Cobin, Martin; And Others

    The second of four related manuals describing the goals and methods of an established developmental theatre project at the University of Colorado, this manual presents a hierarchical framework and practical guidelines for conducting drama workshops for elementary students, secondary students, and adults. It describes four types of…

  13. Activated Sludge Process Workshop Manual.

    ERIC Educational Resources Information Center

    Ontario Ministry of the Environment, Toronto.

    This manual was developed for use at workshops designed to upgrade the knowledge of experienced wastewater treatment plant operators. Each of the lessons in this document has clearly stated behavioral objectives to tell the trainee what he should know or do after completing that topic. Areas covered in this manual include: types and factors…

  14. SPI/VMS user manual

    SciTech Connect

    King, M.E.

    1990-03-12

    This manual explains how to use the Security Profile Inspector for the VMS operating system (SPI/VMS) to detect potential security problems. This manual provides different levels of information for different levels of understanding of SPI/VMS and the VMS operating system.

  15. INDOOR AIR QUALITY MODELING (CHAPTER 58)

    EPA Science Inventory

    The chapter discussses indoor air quality (IAQ) modeling. Such modeling provides a way to investigate many IAQ problems without the expense of large field experiments. Where experiments are planned, IAQ models can be used to help design experiments by providing information on exp...

  16. Chapter 4. Students' Attitudes toward Computer Games

    ERIC Educational Resources Information Center

    Russian Education and Society, 2004

    2004-01-01

    In this chapter, the authors attempt not only to discern aspects that relate to age, place, and the amount of time devoted to playing computer games in adolescence, but also to study content characteristics of their attitudes such as: the developmental dynamic in the change of their genre preferences in computer games, changes in factors that…

  17. Chapter 8: Youth, Technology, and Media Cultures

    ERIC Educational Resources Information Center

    Sefton-Green, Julian

    2006-01-01

    This chapter begins with a scenario contrasting two seemingly different images of child and media from before and after the "digital revolution." The author argues that there is much greater continuity in how this relationship has been conceptualized over the period than is commonly imagined. While not offering a comprehensive study of recent…

  18. Chapter 12: spatial or area repellents

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Spatial repellents a three-dimensional zone of protection around a host from attacks by biting arthropods. This chapter reviews current knowledge and outlines future directions for utilization of spatial repellents. Current knowledge includes the kinds of products, both active and passive devices,...

  19. The Chapter I Challenge: Colorado's Contribution 1995.

    ERIC Educational Resources Information Center

    Petro, Janice Rose

    Chapter I of the Elementary and Secondary Education Act (ESEA) is the largest federally-funded program designed to provide services to elementary and secondary students to meet the special needs of educationally deprived students who reside in areas with high concentrations of low-income families. The 1994-95 school year is the last year of…

  20. Recommended Research on Artificial Gravity. Chapter 13

    NASA Technical Reports Server (NTRS)

    Vernikos, Joan; Paloski, William; Fuller, Charles; Clement, Gilles

    2006-01-01

    Based on the summaries presented in the above sections of what is still to be learned on the effects of artificial gravity on human functions, this chapter will discuss the short- and long-term steps of research required to understand fundamentals and to validate operational aspects of using artificial gravity as an effective countermeasure for long-duration space travel.

  1. Chapter Five: Language Learning and Discursive Practice

    ERIC Educational Resources Information Center

    Young, Richard F.

    2008-01-01

    This chapter is framed by the three questions related to learning in Practice Theory posed by Johannes Wagner (2008): (1) What is learned?; (2) Who is learning?; and (3) Who is participating in the learning? These questions are addressed in two learning theories: Language Socialization and Situated Learning theory. In Language Socialization, the…

  2. Chapter 7: Principles of Professional Development

    ERIC Educational Resources Information Center

    O'Sullivan, Mary; Deglau, Dena

    2006-01-01

    This chapter summarizes the 4-year-long PEP professional development (PD) initiative in terms of current perspectives on teacher learning and PD, shares lessons learned about the design and delivery of high-quality PD, and presents some principles to guide the development of future PD efforts. The first section reviews the definition and…

  3. A weatherization manual for LIHEAP policy makers and program administrators

    SciTech Connect

    Witherspoon, M.J.; Marabate, R.; Weinhaus, M.; Eisenberg, J.F.

    1993-09-01

    This manual is designed to provide Low-Income Home Energy Assistance Program (LIHEAP) directors with information about weatherization and innovative ways they can utilize LIHEAP funds for weatherization activities. It contains a description of innovative weatherization programs which demonstrate creative uses of LIHEAP funds in weatherization activities. In many of the innovative examples, state and local administrators are coordinating their LIHEAP funds with the US Department of Energy (DOE) Low-Income Weatherization Assistance Program`s funding and with a variety of other federal, state and utility company resources. The innovative programs demonstrate how LIHEAP funds can be used in client education, targeting high energy users, staff training, assessment and audits for weatherization services. The reader will find in the appendices lists of contact persons and further descriptions of the programs highlighted. Although designed with LIHEAP directors in mind, the practices and programs highlighted in this manual are of practical use to any state, local or utility weatherization program administrator. The glossary at the end of the descriptive chapters will assist readers with the terminology used throughout the manual. This manual and the many resource entities cited in its appendices provide ready access to a wealth of state-of-the-art information which could lead to a more cost-effective expenditure of LIBEAP weatherization dollars.

  4. Metrology of Large Parts. Chapter 5

    NASA Technical Reports Server (NTRS)

    Stahl, H. Philip

    2012-01-01

    As discussed in the first chapter of this book, there are many different methods to measure a part using optical technology. Chapter 2 discussed the use of machine vision to measure macroscopic features such as length and position, which was extended to the use of interferometry as a linear measurement tool in chapter 3, and laser or other trackers to find the relation of key points on large parts in chapter 4. This chapter looks at measuring large parts to optical tolerances in the sub-micron range using interferometry, ranging, and optical tools discussed in the previous chapters. The purpose of this chapter is not to discuss specific metrology tools (such as interferometers or gauges), but to describe a systems engineering approach to testing large parts. Issues such as material warpage and temperature drifts that may be insignificant when measuring a part to micron levels under a microscope, as will be discussed in later chapters, can prove to be very important when making the same measurement over a larger part. In this chapter, we will define a set of guiding principles for successfully overcoming these challenges and illustrate the application of these principles with real world examples. While these examples are drawn from specific large optical testing applications, they inform the problems associated with testing any large part to optical tolerances. Manufacturing today relies on micrometer level part performance. Fields such as energy and transportation are demanding higher tolerances to provide increased efficiencies and fuel savings. By looking at how the optics industry approaches sub-micrometer metrology, one can gain a better understanding of the metrology challenges for any larger part specified to micrometer tolerances. Testing large parts, whether optical components or precision structures, to optical tolerances is just like testing small parts, only harder. Identical with what one does for small parts, a metrologist tests large parts and optics

  5. Instruction manual for the Wahoo computerized database

    SciTech Connect

    Lasota, D.; Watts, K.

    1995-05-01

    As part of our research on the Lisburne Group, we have developed a powerful relational computerized database to accommodate the huge amounts of data generated by our multi-disciplinary research project. The Wahoo database has data files on petrographic data, conodont analyses, locality and sample data, well logs and diagenetic (cement) studies. Chapter 5 is essentially an instruction manual that summarizes some of the unique attributes and operating procedures of the Wahoo database. The main purpose of a database is to allow users to manipulate their data and produce reports and graphs for presentation. We present a variety of data tables in appendices at the end of this report, each encapsulating a small part of the data contained in the Wahoo database. All the data are sorted and listed by map index number and stratigraphic position (depth). The Locality data table (Appendix A) lists of the stratigraphic sections examined in our study. It gives names of study areas, stratigraphic units studied, locality information, and researchers. Most localities are keyed to a geologic map that shows the distribution of the Lisburne Group and location of our sections in ANWR. Petrographic reports (Appendix B) are detailed summaries of data the composition and texture of the Lisburne Group carbonates. The relative abundance of different carbonate grains (allochems) and carbonate texture are listed using symbols that portray data in a format similar to stratigraphic columns. This enables researchers to recognize trends in the evolution of the Lisburne carbonate platform and to check their paleoenvironmental interpretations in a stratigraphic context. Some of the figures in Chapter 1 were made using the Wahoo database.

  6. SU-E-I-91: Reproducibility in Prescribed Dose in AEC CT Scans Due to Table Height, Patient Size, and Localizer Acquisition Order

    SciTech Connect

    Winslow, J; Hurwitz, L; Christianson, O; Samei, E

    2014-06-01

    Purpose: In CT scanners, the automatic exposure control (AEC) tube current prescription depends on the acquired prescan localizer image(s). The purpose of this study was to quantify the effect that table height, patient size, and localizer acquisition order may have on the reproducibility in prescribed dose. Methods: Three phantoms were used for this study: the Mercury Phantom (comprises three tapered and four uniform regions of polyethylene 16, 23, 30, and 37 cm in diameter), acrylic sheets, and an adult anthropomorphic phantom. Phantoms were positioned per clinical protocol by our chief CT technologist or broader symmetry. Using a GE Discovery CT750HD scanner, a lateral (LAT) and posterior-anterior (PA) localizer was acquired for each phantom at different table heights. AEC scan acquisitions were prescribed for each combination of phantom, localizer orientation, and table height; the displayed volume CTDI was recorded for each. Results were analyzed versus table height. Results: For the two largest Mercury Phantom section scans based on the PA localizer, the percent change in volume CTDI from ideal were at least 20% lower and 35% greater for table heights 4 cm above and 4 cm below proper centering, respectively. For scans based on the LAT localizer, the percent change in volume CTDI from ideal were no greater than 12% different for 4 cm differences in table height. The properly centered PA and LAT localizer-based volume CTDI values were within 13% of each other. Conclusion: Since uncertainty in vertical patient positioning is inherently greater than lateral positioning and because the variability in dose exceeds any dose penalties incurred, the LAT localizer should be used to precisely and reproducibly deliver the intended amount of radiation prescribed by CT protocols. CT protocols can be adjusted to minimize the expected change in average patient dose.

  7. MARI mini-manual

    NASA Astrophysics Data System (ADS)

    Bennington, S. M.; Eccleston, R. S.

    1994-09-01

    The MARI spectrometer is funded by the Japanese Ministry of Education, Culture and Science (Monbusho) as part of the UK-Japan collaboration in neutron scattering. MARI is a direct geometry chopper spectrometer. It uses a Fermi chopper to monochromatic the incident neutron beam to give incident energies in the range 10 to 2000 meV. It is very similar in design to its sister machine HET, but with a detector bank that continuously covers the angular range from 3 to 135 degrees, MARI is able to map large regions of Q-E space in a single measurement. At present about 600 of the full complement of 1000 detectors are installed. All are 10 bar (3)He gas proportional counters and all come from the same manufacturer, this means that their efficiency and background are almost the same. The beam size at the sample position is 50 by 50 mm, but motorized jaws in the Fermi chopper pit and in the sample tank can be used to reduce this size. Chapter headings are the following: Introduction; The hardware on MARI; Controlling the Instrument; Data Analysis and Visualization; Appendices.

  8. COSY INFINITY reference manual

    SciTech Connect

    Berz, M.

    1990-07-01

    This is a reference manual for the arbitrary order particle optics and beam dynamics code COSY INFINITY. It is current as of June 28, 1990. COSY INFINITY is a code to study and design particle optical systems, including beamlines, spectrometers, and particle accelerators. At its core it is using differential algebraic (DA) methods, which allow a very systematic and simple calculation of high order effects. At the same time, it allows the computation of dependences on system parameters, which is often interesting in its own right and can also be used for fitting. COSY INFINITY has a full structured object oriented language environment. This provides a simple interface for the casual user. At the same time, it offers the demanding user a very flexible and powerful tool for the study and design of systems, and more generally, the utilization of DA methods. The power and generality of the environment is perhaps best demonstrated by the fact that the physics routines of COSY INFINITY are written in its own input language and are very compact. The approach also considerably facilitates the implementation of new features because they are incorporated with the same commands that are used for design and study. 26 refs.

  9. Safe Manual Jettison

    NASA Technical Reports Server (NTRS)

    Barton, Jay

    2008-01-01

    In space, the controlled release of certain cargoes is no less useful than the maritime jettisons from which they take their name but is also much more dangerous. Experience has shown that jettisons can be performed safely, but the process is complicated with the path to performing a jettison taking months or even years. In the background, time is also required to write procedures, train the crew, configure the vehicle, and many other activities. This paper outlines the current process used by the National Aeronautics and Space Administration (NASA) for manual jettisons, detailing the methods used to assure that the jettisons and the jettisoned objects are as safe as achievable and that the crew is adequately trained to be able to affect the safe jettison. The goal of this paper is not only to capture what it takes to perform safe jettisons in the near Earth environment but to extrapolate this knowledge to future space exploration scenarios that will likely have Extravehicular Activity (EVA) and International Partner (IP) interfaces.

  10. Manual braille writer

    DOEpatents

    Hawk, Lawrence S.; Turner, Joe H.

    1992-01-01

    A manual-type braille writer that provides for both writing and reading in a normal left-to-right manner. In the preferred form, this braille writer has a clip board type base, and in the preferred embodiment a guide plate assembly can be moved to, and releasable fixed at, selected vertical locations along this base. The guide plate assembly is provided with a plurality of character cells uniformly spaced along rows across the guide plate assembly as well as in uniformly spaced rows. This guide plate assembly has a lower portion to be placed under a sheet of paper positioned on the clip board base and an upper portion to be positioned on top of the sheet. This upper portion is hinged with respect to the lower portion. Each character cell is typically made up of six appropriately spaced pins extending up from the lower portion that are aligned with a rosette-shaped cutout in the upper portion. A stylus member is provided that has a distal end to be fitted into the cutout of the character cell so that a recess in the end thereof presses the writing paper over the pin associated with that recess to produce a braille dot at that location. When desired, the upper portion can be lifted up so that the text already written can be read or to determine the place for initiating writing when writing has been interrupted.

  11. Manual braille writer

    DOEpatents

    Hawk, L.S.; Turner, J.H.

    1992-07-28

    A manual-type braille writer is described that provides for both writing and reading in a normal left-to-right manner. In the preferred form, this braille writer has a clip board type base, and in the preferred embodiment a guide plate assembly can be moved to, and releasable fixed at, selected vertical locations along this base. The guide plate assembly is provided with a plurality of character cells uniformly spaced along rows across the guide plate assembly as well as in uniformly spaced rows. This guide plate assembly has a lower portion to be placed under a sheet of paper positioned on the clip board base and an upper portion to be positioned on top of the sheet. This upper portion is hinged with respect to the lower portion. Each character cell is typically made up of six appropriately spaced pins extending up from the lower portion that are aligned with a rosette-shaped cutout in the upper portion. A stylus member is provided that has a distal end to be fitted into the cutout of the character cell so that a recess in the end thereof presses the writing paper over the pin associated with that recess to produce a braille dot at that location. When desired, the upper portion can be lifted up so that the text already written can be read or to determine the place for initiating writing when writing has been interrupted. 10 figs.

  12. JSATS Decoder Software Manual

    SciTech Connect

    Flory, Adam E.; Lamarche, Brian L.; Weiland, Mark A.

    2013-05-01

    The Juvenile Salmon Acoustic Telemetry System (JSATS) Decoder is a software application that converts a digitized acoustic signal (a waveform stored in the .bwm file format) into a list of potential JSATS Acoustic MicroTransmitter (AMT) tagcodes along with other data about the signal including time of arrival and signal to noise ratios (SNR). This software is capable of decoding single files, directories, and viewing raw acoustic waveforms. When coupled with the JSATS Detector, the Decoder is capable of decoding in ‘real-time’ and can also provide statistical information about acoustic beacons placed within receive range of hydrophones within a JSATS array. This document details the features and functionality of the software. The document begins with software installation instructions (section 2), followed in order by instructions for decoder setup (section 3), decoding process initiation (section 4), then monitoring of beacons (section 5) using real-time decoding features. The last section in the manual describes the beacon, beacon statistics, and the results file formats. This document does not consider the raw binary waveform file format.

  13. Manual of Scaling Methods

    NASA Technical Reports Server (NTRS)

    Bond, Thomas H. (Technical Monitor); Anderson, David N.

    2004-01-01

    This manual reviews the derivation of the similitude relationships believed to be important to ice accretion and examines ice-accretion data to evaluate their importance. Both size scaling and test-condition scaling methods employing the resulting similarity parameters are described, and experimental icing tests performed to evaluate scaling methods are reviewed with results. The material included applies primarily to unprotected, unswept geometries, but some discussion of how to approach other situations is included as well. The studies given here and scaling methods considered are applicable only to Appendix-C icing conditions. Nearly all of the experimental results presented have been obtained in sea-level tunnels. Recommendations are given regarding which scaling methods to use for both size scaling and test-condition scaling, and icing test results are described to support those recommendations. Facility limitations and size-scaling restrictions are discussed. Finally, appendices summarize the air, water and ice properties used in NASA scaling studies, give expressions for each of the similarity parameters used and provide sample calculations for the size-scaling and test-condition scaling methods advocated.

  14. Stirling engine design manual

    NASA Technical Reports Server (NTRS)

    Martini, W. R.

    1978-01-01

    This manual is intended to serve both as an introduction to Stirling engine analysis methods and as a key to the open literature on Stirling engines. Over 800 references are listed and these are cross referenced by date of publication, author and subject. Engine analysis is treated starting from elementary principles and working through cycles analysis. Analysis methodologies are classified as first, second or third order depending upon degree of complexity and probable application; first order for preliminary engine studies, second order for performance prediction and engine optimization, and third order for detailed hardware evaluation and engine research. A few comparisons between theory and experiment are made. A second order design procedure is documented step by step with calculation sheets and a worked out example to follow. Current high power engines are briefly described and a directory of companies and individuals who are active in Stirling engine development is included. Much remains to be done. Some of the more complicated and potentially very useful design procedures are now only referred to. Future support will enable a more thorough job of comparing all available design procedures against experimental data which should soon be available.

  15. The LATDYN user's manual

    NASA Technical Reports Server (NTRS)

    Housner, J. M.; Mcgowan, P. E.; Abrahamson, A. L.; Powell, M. G.

    1986-01-01

    The LATDYN User's Manual presents the capabilities and instructions for the LATDYN (Large Angle Transient DYNamics) computer program. The LATDYN program is a tool for analyzing the controlled or uncontrolled dynamic transient behavior of interconnected deformable multi-body systems which can undergo large angular motions of each body relative other bodies. The program accommodates large structural deformation as well as large rigid body rotations and is applicable, but not limited to, the following areas: (1) development of large flexible space structures; (2) slewing of large space structure components; (3) mechanisms with rigid or elastic components; and (4) robotic manipulations of beam members. Presently the program is limited to two dimensional problems, but in many cases, three dimensional problems can be exactly or approximately reduced to two dimensions. The program uses convected finite elements to affect the large angular motions involved in the analysis. General geometry is permitted. Detailed user input and output specifications are provided and discussed with example runstreams. To date, LATDYN has been configured for CDC/NOS and DEC VAX/VMS machines. All coding is in ANSII-77 FORTRAN. Detailed instructions regarding interfaces with particular computer operating systems and file structures are provided.

  16. Vaccination against bacterial kidney disease: Chapter 22

    USGS Publications Warehouse

    Elliott, Diane G.; Wiens, Gregory D.; Hammell, K. Larry; Rhodes, Linda D.; Edited by Gudding, Roar; Lillehaug, Atle; Evensen, Øystein

    2014-01-01

    Bacterial kidney disease (BKD) of salmonid fishes, caused by Renibacterium salmoninarum, has been recognized as a serious disease in salmonid fishes since the 1930s. This chapter discusses the occurrence and significance, etiology, and pathogenesis of BKD. It then describes the different vaccination procedures and the effects and side-effects of vaccination. Despite years of research, however, only a single vaccine has been licensed for prevention of BKD, and has demonstrated variable efficacy. Therefore, in addition to a presentation of the current status of BKD vaccination, a discussion of potential future directions for BKD vaccine development is included in the chapter. This discussion is focused on the unique characteristics of R. salmoninarum and its biology, as well as aspects of the salmonid immune system that might be explored specifically to develop more effective vaccines for BKD prevention.

  17. Dust and human health: Chapter 15

    USGS Publications Warehouse

    Morman, Suzette A.; Plumlee, Geoffrey S.; Knippertz, Peter; Stuut, Jan-Berend W.

    2013-01-01

    It is generally accepted that exposure to fine particulate matter may increase risk for human morbidity and mortality. Until recently, population health related studies examining the effects of particulate matter on human health generally examined anthropogenic (industry and combustion by-products) sources with few studies considering contributions from natural sources. This chapter provides an overview of naturally occurring inorganic mineral dust research and associated human health ailments and some of the challenges in elucidating the etiological mechanisms responsible.

  18. Managing atypical hemolytic uremic syndrome: chapter 2.

    PubMed

    Nester, Carla M

    2015-05-01

    Licht et al. present the 2-year follow-up data of the landmark trials studying the efficacy of eculizumab in the treatment of atypical hemolytic uremic syndrome (aHUS). They report sustained improvements in hematologic parameters, continued safety, and additional improvements in kidney function with extended treatment. This report adds a layer of comfort to our care of patients with this rare disease; however, it is unlikely to be the final chapter in the treatment of aHUS.

  19. Solid Lubrication Fundamentals and Applications. Chapter 6

    NASA Technical Reports Server (NTRS)

    Miyoshi, Kazuhisa

    2000-01-01

    This chapter focuses attention on the friction and wear properties of selected solid lubricating films to aid users in choosing the best lubricant, deposition conditions, and operational variables. For simplicity, discussion of the tribological properties of concern is separated into two parts. The first part of the chapter discusses the different solid lubricating films selected for study including commercially developed solid film lubricants: (1) bonded molybdenum disulfide (MoS2), (2) magnetron-sputtered MoS2, (3) ion-plated silver, (4) ion-plated lead, (5) magnetron-sputtered diamondlike carbon (MS DLC), and (6) plasma-assisted, chemical-vapor-deposited diamondlike carbon (PACVD DEC) films. Marked differences in the friction and wear properties of the different films resulted from the different environmental conditions (ultrahigh vacuum, humid air, and dry nitrogen) and the solid film lubricant materials. The second part of the chapter discusses the physical and chemical characteristics, friction behavior, and endurance life of the magnetron-sputtered MoS2 films. The role of interface species and the effects of applied load, film thickness, oxygen pressure, environment, and temperature on the friction and wear properties are considered.

  20. A Survey of Geologic Resources. Chapter 11

    NASA Technical Reports Server (NTRS)

    Edmonson, Jennifer; Rickman, Doug

    2012-01-01

    This chapter focuses on the resources available from the Moon itself: regolith, geologically concentrated materials, and lunar physical features that will enable habitation and generation of power on the surface. This chapter briefly covers the formation of the Moon and thus the formation of the crust of the Moon, as well as the evolution of the regolith. The characteristics of the regolith are provided in some detail, including its mineralogy and lithology. The location of high concentrations of specific minerals or rocks is noted. Other ideal locations for in situ resource utilization technology and lunar habitation are presented. This chapter is intended to be a brief review of current knowledge, and to serve as a foundational source for further study. Each concept presented here has a wealth of literature associated with it; the reader is therefore directed to that literature with each discussion. With great interest in possible manned lunar landings and continued study of the Moon by multiple satellites, the available information changes regularly.

  1. THERM 5 / WINDOW 5 NFRC simulation manual

    SciTech Connect

    Mitchell, Robin; Kohler, Christian; Arasteh, Dariush; Carmody, John; Huizenga, Charlie; Curcija, Dragan

    2003-06-01

    This document, the ''THERM 5/WINDOW 5 NFRC Simulation Manual', discusses how to use the THERM and WINDOW programs to model products for NFRC certified simulations and assumes that the user is already familiar with those programs. In order to learn how to use these programs, it is necessary to become familiar with the material in both the ''THERM User's Manual'' and the ''WINDOW User's Manual''. In general, this manual references the User's Manuals rather than repeating the information. If there is a conflict between either of the User Manual and this ''THERM 5/''WINDOW 5 NFRC Simulation Manual'', the ''THERM 5/WINDOW 5 NFRC Simulation Manual'' takes precedence. In addition, if this manual is in conflict with any NFRC standards, the standards take precedence. For example, if samples in this manual do not follow the current taping and testing NFRC standards, the standards not the samples in this manual, take precedence.

  2. [The Pulsair manual noncontact tonometer].

    PubMed

    Bartos, D; Skopový, M

    1991-02-01

    The authors present a report on their own experience with a manual contact-free tonometer Pulsair of Keeler Co. Ais compared with results obtained by means of the manual aplanation Perkins tonometer of Clement Clarke International Ltd. in the group of patients with IOP under 2,8 kPa the arithmetic means of four readings, the scatter of mean values and standard deviations assessed by both methods were not significant. Correlation coefficient 0.92 (p less than 0.001). In the group of patients with glaucoma and hypertonics with IOP of 2.93 kPa and more the arithmetic means of four readings were significantly higher (at the 1% level) in contact-free tonometry. Correlation coefficient 0.95 (p less than 0.001). The authors emphasize the main advantage of the contact-free manual tonometer: safety, rapid procedure, objectivity, accuracy, manual use. PMID:1913887

  3. Surface Environmental Surveillance Procedures Manual

    SciTech Connect

    Hanf, RW; Dirkes, RL

    1990-02-01

    This manual establishes the procedures for the collection of environmental samples and the performance of radiation surveys and other field measurements. Responsibilities are defined for those personnel directly involved in the collection of samples and the performance of field measurements.

  4. Forest Pest Control. Manual 94.

    ERIC Educational Resources Information Center

    Missouri Univ., Columbia. Agricultural Experiment Station.

    This training manual provides information needed to meet the minimum EPA standards for certification as a commercial applicator of pesticides in forest pest control. The text discusses disease problems, insects, and herbicide use in both established forests and nurseries. (CS)

  5. Manual on indoor air quality

    SciTech Connect

    Diamond, R.C.; Grimsrud, D.T.

    1983-12-01

    This reference manual was prepared to assist electric utilities in helping homeowners, builders, and new home buyers to understand a broad range of issues related to indoor air quality. The manual is directed to technically knowledgeable persons employed by utility companies - the customer service or marketing representative, applications engineer, or technician - who may not have specific expertise in indoor air quality issues. In addition to providing monitoring and control techniques, the manual summarizes the link between pollutant concentrations, air exchange, and energy conservation and describes the characteristics and health effects of selected pollutants. Where technical information is too lengthy or complex for inclusion in this volume, reference sources are given. Information for this manual was gathered from technical studies, manufacturers' information, and other materials from professional societies, institutes, and associations. The aim has been to provide objective technical and descriptive information that can be used by utility personnel to make informed decisions about indoor air quality issues.

  6. The biology of manual therapies.

    PubMed

    Clark, Brian C; Thomas, James S; Walkowski, Stevan A; Howell, John N

    2012-09-01

    Each year, more than 18 million adults in the United States receive manual therapies, at a total annual out-of-pocket cost of $3.9 billion. Although there is growing evidence supporting the efficacy of manual therapies, little is known about the mechanisms underlying these treatments. This lack of basic knowledge significantly limits the development of rational strategies for the use of these treatments and potentially hinders their acceptance by the wider scientific and health care communities. Many authors have hypothesized that manual therapies act by disrupting the pain-spasm-pain cycle, but relatively little experimental evidence has supported this hypothesis. The authors have tested this hypothesis and summarize their work on the biology of manual therapies.

  7. State Energy Program Operations Manual

    SciTech Connect

    Office of Building Technology, State and Community Programs

    1999-03-17

    The State Energy Program Operations Manual is a reference tool for the states and the program officials at the U.S. Department of Energy's Office of Building Technology, State and Community Programs and Regional Support Offices as well as State Energy Offices. The Manual contains information needed to apply for and administer the State Energy Program, including program history, application rules and requirements, and program administration and monitoring requirements.

  8. Instructor Resource Manual for "Advance: A Guide for Improving Your Position." Understanding Yourself, Learning about Careers, Making Career Decisions, Beginning the Job Hunt, Being Interviewed and Deciding on Offers, [and] Getting along on the Job. Cooperative Education, Book 3.

    ERIC Educational Resources Information Center

    Peterson, Jane

    The third in a series of manuals designed for instructor/coordinators of Richland College's cooperative education seminars, this volume contains information and lists of resources to be used in conjunction with the student guide, "Advance: A Guide for Improving Your Position." Each section of the instructor manual corresponds to a chapter in the…

  9. Chemical Dependency and Violence: Working with Dually Affected Families. A Cross-Training Program Manual for Counselors and Advocates.

    ERIC Educational Resources Information Center

    Wright, Janet M.

    This manual is designed as a cross-training program guide for counselors working in the fields of woman abuse and chemical dependency. (A cross-training program is a system for one (or more) agency personnel to train each other in their respective areas of expertise.) Chapter 1 discusses the rationale and goals of a cross-training program; issues…

  10. Teamwork in Task Analysis. Training Manual V. Evaluation of the Marine Corps Task Analysis Program. Technical Report No. 9.

    ERIC Educational Resources Information Center

    Kuriloff, Arthur H.; Yoder, Dale

    This training manual provides guidelines for effective teamwork and work-team maintenance and development. It was designed for use in the Marine Corps Task Analysis program, in which staff members are organized to form a work-team whose continuing performance as an effective team is crucial for success of the project. Chapter 1, the major portion…

  11. Emergency Victim Care. A Training Manual for Emergency Medical Technicians. Module 8--Crisis Intervention, Drug-Related Problems. Revised.

    ERIC Educational Resources Information Center

    Ohio State Dept. of Education, Columbus. Div. of Vocational Education.

    This training manual for emergency medical technicians, one of 14 modules that comprise the Emergency Victim Care textbook, covers crisis intervention and drug related problems. Objectives stated for the two chapters are for the student to be able to describe: treating common mental disturbances, relating to those suffering a crisis in a…

  12. The Role of Mental Health Professionals in the Prevention and Treatment of Child Abuse and Neglect. The User Manual Series.

    ERIC Educational Resources Information Center

    Peterson, Marilyn Strachan; Urquiza, Anthony J.

    This manual is intended to provide mental health professionals with the information needed in the evaluation and treatment of maltreated children and their families. An introductory chapter briefly considers the roles of the various mental health disciplines in child abuse intervention, including psychiatry, psychology, clinical social work,…

  13. Demonstration and Research Pest Control: A Training Program for the Certification of Pesticide Applicators, Manual No. 10.

    ERIC Educational Resources Information Center

    Rust, Harry K.; And Others

    This manual is intended to provide the information necessary to meet EPA standards for demonstration and research pest control and prepare for the written examination required for certification. Emphasis is placed on the principles of safe pesticide use. Chapters are included on pesticide applicator certification in Virginia, basics of pest…

  14. Extension Agricola (Agricultral Extension). Appropriate Technologies for Development. Peace Corps Information Collection & Exchange Manual No. M-39.

    ERIC Educational Resources Information Center

    Gibbons, Michael J.; Schroeder, Richard

    This Spanish-language manual, developed for training Peace Corps volunteers for service in Spanish-speaking developing countries, explains the process of agricultural extension and provides practical guidance on carrying out an extension program. The first of six chapters explains what agricultural extension is and how it is used in the Peace…

  15. A Manual for Use of BESTPRED: A Program for Estimation of Lactation Yield and Persistency Using Best Prediction

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This manual describes how to obtain, install, and run a Fortran 90 program for calculating lactation yields and persistencies using best prediction methodology. Chapters also present the theory underlying best prediction, describe the methodology used to calculate covariances among pairs of days in ...

  16. Guidelines for Management Consulting Programs for Small-Scale Enterprise. Appropriate Technologies for Development. Manual M-14.

    ERIC Educational Resources Information Center

    Vaughan, Gary L.

    This manual is designed to assist management consultants in working with small-scale entrepreneurs in developing countries. Addressed in an overview of the small-scale enterprise (SSE) are: the role of the SSE in third world development, problems of SSEs, and target firms. The second chapter deals with various forms of management assistance to…

  17. Student Solutions Manual to accompany Understanding Physics

    NASA Astrophysics Data System (ADS)

    Cummings, Karen; Laws, Priscilla W.; Redish, Edward F.; Cooney, Patrick J.; Christman, J. Richard

    2004-05-01

    Work more effectively and check solutions as you go along with the text! This Student Solutions Manual is designed for use with Cummings' Understanding Physics. Its primary purpose is to show readers by example how to solve various types of problems given at the end of each chapter in the text. Most of the solutions start from definitions or fundamental relationships and the final equation is derived. This technique highlights the fundamentals and at the same time gives readers the opportunity to review the mathematical steps required to obtain a solution. The mere plugging of numbers into equations derived in the text is avoided for the most part. Readers will learn to examine any assumptions that are made in setting up and solving each problem. Using an interactive strategy, Understanding Physics provides a hands-on introduction to the fundamentals of physics. Built on the foundations of Halliday, Resnick, and Walker's Fundamentals of Physics, 6th Edition, this text represents the latest methods in physics instruction. Incorporating new approaches based on Physics Education Research (PER), this text is designed for courses that use computer-based laboratory tools, and promote Activity Based Physics in lectures, labs, and recitations.

  18. 14 CFR 183.53 - Procedures manual.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Procedures manual. 183.53 Section 183.53... manual. No ODA Letter of Designation may be issued before the Administrator approves an applicant's procedures manual. The approved manual must: (a) Be available to each member of the ODA Unit; (b) Include...

  19. 14 CFR 21.308 - Quality manual.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Quality manual. 21.308 Section 21.308... manual. Each applicant for or holder of a PMA must provide a manual describing its quality system to the FAA for approval. The manual must be in the English language and retrievable in a form acceptable...

  20. 25 CFR 175.5 - Operations manual.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Operations manual. 175.5 Section 175.5 Indians BUREAU OF... Provisions § 175.5 Operations manual. (a) The Area Director shall establish an operations manual for the... Director shall amend the operations manual as needed. (b) The public shall be notified by the Area...