Science.gov

Sample records for aerial hyphae formation

  1. Hydrophobin Genes Involved in Formation of Aerial Hyphae and Fruit Bodies in Schizophyllum.

    PubMed Central

    Wessels, J; De Vries, O; Asgeirsdottir, SA; Schuren, F

    1991-01-01

    Fungi typically grow by apical extension of hyphae that penetrate moist substrates. After establishing a branched feeding mycelium, the hyphae differentiate and grow away from the substrate into the air where they form various structures such as aerial hyphae and mushrooms. In the basidiomycete species Schizophyllum commune, we previously identified a family of homologous genes that code for small cysteine-rich hydrophobic proteins. We now report that the encoded hydrophobins are excreted in abundance into the culture medium by submerged feeding hyphae but form highly insoluble complexes in the walls of emerging hyphae. The Sc3 gene encodes a hydrophobin present in walls of aerial hyphae. The homologous Sc1 and Sc4 genes, which are regulated by the mating-type genes, encode hydrophobins present in walls of fruit body hyphae. The hydrophobins are probably instrumental in the emergence of these aerial structures. PMID:12324614

  2. A Model for Growth of a Single Fungal Hypha Based on Well-Mixed Tanks in Series: Simulation of Nutrient and Vesicle Transport in Aerial Reproductive Hyphae

    PubMed Central

    Balmant, Wellington; Sugai-Guérios, Maura Harumi; Coradin, Juliana Hey; Krieger, Nadia; Furigo Junior, Agenor; Mitchell, David Alexander

    2015-01-01

    Current models that describe the extension of fungal hyphae and development of a mycelium either do not describe the role of vesicles in hyphal extension or do not correctly describe the experimentally observed profile for distribution of vesicles along the hypha. The present work uses the n-tanks-in-series approach to develop a model for hyphal extension that describes the intracellular transport of nutrient to a sub-apical zone where vesicles are formed and then transported to the tip, where tip extension occurs. The model was calibrated using experimental data from the literature for the extension of reproductive aerial hyphae of three different fungi, and was able to describe different profiles involving acceleration and deceleration of the extension rate. A sensitivity analysis showed that the supply of nutrient to the sub-apical vesicle-producing zone is a key factor influencing the rate of extension of the hypha. Although this model was used to describe the extension of a single reproductive aerial hypha, the use of the n-tanks-in-series approach to representing the hypha means that the model has the flexibility to be extended to describe the growth of other types of hyphae and the branching of hyphae to form a complete mycelium. PMID:25785863

  3. The chaplins: a family of hydrophobic cell-surface proteins involved in aerial mycelium formation in Streptomyces coelicolor

    PubMed Central

    Elliot, Marie A.; Karoonuthaisiri, Nitsara; Huang, Jianqiang; Bibb, Maureen J.; Cohen, Stanley N.; Kao, Camilla M.; Buttner, Mark J.

    2003-01-01

    The filamentous bacterium Streptomyces coelicolor differentiates by forming specialized, spore-bearing aerial hyphae that grow into the air. Using microarrays, we identified genes that are down-regulated in a mutant unable to erect aerial hyphae. Through this route, we identified a previously unknown layer of aerial mycelium surface proteins (the “chaplins”). The chaplins share a hydrophobic domain of ∼40 residues (the “chaplin domain”), and all have a secretion signal. The five short chaplins (ChpD,E,F,G,H) have one chaplin domain, whereas the three long chaplins (ChpA,B,C) have two chaplin domains and a C-terminal “sorting signal” that targets them for covalent attachment to the cell wall by sortase enzyme. Expression of the two chaplin genes examined (chpE, chpH) depended on aerial hyphae formation but not sporulation, and egfp fusions showed their expression localized to aerial structures. Mass spectrometry of cell wall extracts confirmed that the short chaplins localized to the cell surface. Deletion of chaplin genes caused severe delays in aerial hyphae formation, a phenotype rescued by exogenous application of chaplin proteins. These observations implicate the chaplins in aerial mycelium formation, and suggest that coating of the envelope by the chaplins is required for aerial hyphae to grow out of the aqueous environment of the substrate mycelium into the air. PMID:12832397

  4. Pseudomonas aeruginosa lipopolysaccharide inhibits Candida albicans hyphae formation and alters gene expression during biofilm development.

    PubMed

    Bandara, H M H N; K Cheung, B P; Watt, R M; Jin, L J; Samaranayake, L P

    2013-02-01

    Elucidation of bacterial and fungal interactions in multispecies biofilms will have major impacts on understanding the pathophysiology of infections. The objectives of this study were to (i) evaluate the effect of Pseudomonas aeruginosa lipopolysaccharide (LPS) on Candida albicans hyphal development and transcriptional regulation, (ii) investigate protein expression during biofilm formation, and (iii) propose likely molecular mechanisms for these interactions. The effect of LPS on C. albicans biofilms was assessed by XTT-reduction and growth curve assays, light microscopy, scanning electron microscopy (SEM), and confocal laser scanning microscopy (CLSM). Changes in candidal hypha-specific genes (HSGs) and transcription factor EFG1 expression were assessed by real-time polymerase chain reaction and two-dimensional gel electrophoresis, respectively. Proteome changes were examined by mass spectrometry. Both metabolic activities and growth rates of LPS-treated C. albicans biofilms were significantly lower (P < 0.05). There were higher proportions of budding yeasts in test biofilms compared with the controls. SEM and CLSM further confirmed these data. Significantly upregulated HSGs (at 48 h) and EFG1 (up to 48 h) were noted in the test biofilms (P < 0.05) but cAMP levels remained unaffected. Proteomic analysis showed suppression of candidal septicolysin-like protein, potential reductase-flavodoxin fragment, serine hydroxymethyltransferase, hypothetical proteins Cao19.10301(ATP7), CaO19.4716(GDH1), CaO19.11135(PGK1), CaO19.9877(HNT1) by P. aeruginosa LPS. Our data imply that bacterial LPS inhibit C. albicans biofilm formation and hyphal development. The P. aeruginosa LPS likely target glycolysis-associated mechanisms during candidal filamentation. PMID:23194472

  5. Mutational activation of a Galphai causes uncontrolled proliferation of aerial hyphae and increased sensitivity to heat and oxidative stress in Neurospora crassa.

    PubMed Central

    Yang, Q; Borkovich, K A

    1999-01-01

    Heterotrimeric G proteins, consisting of alpha, beta, and gamma subunits, transduce environmental signals through coupling to plasma membrane-localized receptors. We previously reported that the filamentous fungus Neurospora crassa possesses a Galpha protein, GNA-1, that is a member of the Galphai superfamily. Deletion of gna-1 leads to defects in apical extension, differentiation of asexual spores, sensitivity to hyperosmotic media, and female fertility. In addition, Deltagna-1 strains have lower intracellular cAMP levels under conditions that promote morphological abnormalities. To further define the function of GNA-1 in signal transduction in N. crassa, we examined properties of strains with mutationally activated gna-1 alleles (R178C or Q204L) as the only source of GNA-1 protein. These mutations are predicted to inhibit the GTPase activity of GNA-1 and lead to constitutive signaling. In the sexual cycle, gna-1(R178C) and gna-1(Q204L) strains are female-fertile, but produce fewer and larger perithecia than wild type. During asexual development, gna-1(R178C) and gna-1(Q204L) strains elaborate abundant, long aerial hyphae, produce less conidia, and possess lower levels of carotenoid pigments in comparison to wild-type controls. Furthermore, gna-1(R178C) and gna-1(Q204L) strains are more sensitive to heat shock and exposure to hydrogen peroxide than wild-type strains, while Deltagna-1 mutants are more resistant. In contrast to Deltagna-1 mutants, gna-1(R178C) and gna-1(Q204L) strains have higher steady-state levels of cAMP than wild type. The results suggest that GNA-1 possesses several Gbetagamma-independent functions in N. crassa. We propose that GNA-1 mediates signal transduction pathway(s) that regulate aerial hyphae development and sensitivity to heat and oxidative stresses, possibly through modulation of cAMP levels. PMID:9872952

  6. Isolation and characterization of Candida albicans morphological mutants derepressed for the formation of filamentous hypha-type structures

    SciTech Connect

    Gil, C.; Pomes, R.; Nombela, C. )

    1990-05-01

    Several Candida albicans morphological mutants were obtained by a procedure based on a combined treatment with nitrous acid plus UV irradiation and a double-enrichment step to increase the proportion of mutants growing as long filamentous structures. Altered cell morphogenesis in these mutants correlated with an altered colonial phenotype. Two of these mutants, C. albicans NEL102 and NEL103, were selected and characterized. Mutant blastoconidia initiated budding but eventually gave rise to filamentous hypha-type formations. These filaments were long and septate, and they branched very regularly at positions near septa. Calcofluor white (which is known to bind chitin-rich areas) stained septa, branching zones, and filament tips very intensely, as observed under the fluorescence microscope. Wild-type hybrids were obtained by fusing protoplasts of strain NEL102 with B14, another morphological mutant previously described as being permanently pseudomycelial, indicating that genetic determinants responsible for the two altered phenotypes are different. The mutants characterized in this work seemed to sequentially express the morphogenic characteristics of C. albicans, from blastoconidia to hyphae, in the absence of any inducer. Further characterization of these strains could be relevant to gain understanding of the genetic control of dimorphism in this species.

  7. Control by A-Factor of a Metalloendopeptidase Gene Involved in Aerial Mycelium Formation in Streptomyces griseus

    PubMed Central

    Kato, Jun-ya; Suzuki, Ayano; Yamazaki, Haruka; Ohnishi, Yasuo; Horinouchi, Sueharu

    2002-01-01

    In Streptomyces griseus, A-factor (2-isocapryloyl-3R-hydroxymethyl-γ-butyrolactone) switches on aerial mycelium formation and secondary metabolite biosynthesis. An A-factor-dependent transcriptional activator, AdpA, activates multiple genes required for morphological development and secondary metabolism in a programmed manner. A region upstream of a zinc-containing metalloendopeptidase gene (sgmA) was found among the DNA fragments that had been isolated as AdpA-binding sites. The primary product of sgmA consisted of N-terminal pre, N-terminal pro, mature, and C-terminal pro regions. sgmA was transcribed in an AdpA-dependent manner, and its transcription was markedly enhanced at the timing of aerial mycelium formation. AdpA bound two sites in the region upstream of the sgmA promoter; one was at about nucleotide position −60 (A site) with respect to the transcriptional start point of sgmA, and the other was at about position −260 (B site), as determined by DNase I footprinting. Transcriptional analysis with mutated promoters showed that the A site was essential for the switching on of sgmA transcription and that the B site was necessary for the marked enhancement of transcription at the timing of aerial mycelium formation. Disruption of the chromosomal sgmA gene resulted in a delay in aerial hypha formation by half a day. SgmA is therefore suggested to be associated with the programmed morphological development of Streptomyces, in which this peptidase, perhaps together with other hydrolytic enzymes, plays a role in the degradation of proteins in substrate hyphae for reuse in aerial hypha formation. PMID:12374836

  8. Control by A-factor of a metalloendopeptidase gene involved in aerial mycelium formation in Streptomyces griseus.

    PubMed

    Kato, Jun-ya; Suzuki, Ayano; Yamazaki, Haruka; Ohnishi, Yasuo; Horinouchi, Sueharu

    2002-11-01

    In Streptomyces griseus, A-factor (2-isocapryloyl-3R-hydroxymethyl-gamma-butyrolactone) switches on aerial mycelium formation and secondary metabolite biosynthesis. An A-factor-dependent transcriptional activator, AdpA, activates multiple genes required for morphological development and secondary metabolism in a programmed manner. A region upstream of a zinc-containing metalloendopeptidase gene (sgmA) was found among the DNA fragments that had been isolated as AdpA-binding sites. The primary product of sgmA consisted of N-terminal pre, N-terminal pro, mature, and C-terminal pro regions. sgmA was transcribed in an AdpA-dependent manner, and its transcription was markedly enhanced at the timing of aerial mycelium formation. AdpA bound two sites in the region upstream of the sgmA promoter; one was at about nucleotide position -60 (A site) with respect to the transcriptional start point of sgmA, and the other was at about position -260 (B site), as determined by DNase I footprinting. Transcriptional analysis with mutated promoters showed that the A site was essential for the switching on of sgmA transcription and that the B site was necessary for the marked enhancement of transcription at the timing of aerial mycelium formation. Disruption of the chromosomal sgmA gene resulted in a delay in aerial hypha formation by half a day. SgmA is therefore suggested to be associated with the programmed morphological development of Streptomyces, in which this peptidase, perhaps together with other hydrolytic enzymes, plays a role in the degradation of proteins in substrate hyphae for reuse in aerial hypha formation. PMID:12374836

  9. Penetration Peg Formation and Invasive Hyphae Development Require Stage-Specific Activation of MoGTI1 in Magnaporthe oryzae.

    PubMed

    Li, Yang; Wang, Guanghui; Xu, Jin-Rong; Jiang, Cong

    2016-01-01

    The hemibiotrophic pathogen Magnaporthe oryzae causes one of the most destructive diseases in cultivated rice. Complex infection-related morphogenesis and production of various effectors are known to be important for successful colonization and disease development. In this study, we characterized the activation of the MoGTI1 transcription factor and its role in infection-related morphogenesis and effector gene expression. The Mogti1 mutant was nonpathogenic, although it was normal in appressorium formation and turgor generation. Close examination showed that Mogti1 was defective in penetration and growth of normal invasive hyphae. Deletion of MoGTI1 affected the expression of the majority of effector genes. The expression of MoGti1 appeared to be controlled by the Mps1 but not Pmk1 mitogen-activated protein kinase (MAPK), and the mps1 and Mogti1 mutants had similar phenotypes in plant infection and cell wall integrity defects. However, lack of MAPK phosphorylation sites and dispensability of the putative MAPK docking site suggested that MoGti1 is not a direct target of Mps1. Site-specific mutagenesis analyses showed that the putative protein kinase A phosphorylation site was not essential for localization of MoGti1 to the nucleus but important for its normal function. Although the cyclin-dependent kinase (CDK) phosphorylation site of MoGti1 is dispensable during vegetative growth and appressorium formation, the S77A mutation affected penetration and invasive growth. Localization of MoGti1(S77A)-green fluorescent protein to the nucleus in late stages of appressorium formation and during invasive growth was not observed, suggesting a stage-specific CDK phosphorylation of MoGti1. Overall, our data indicate that Mps1 may indirectly regulate the expression of MoGti1 in maintaining cell wall integrity, conidiation, and plant infection. MoGti1 is likely a stage-specific target of CDK and plays a crucial role in effector gene expression and morphogenesis related to the

  10. Submerged Conidiation and Product Formation by Aspergillus niger at Low Specific Growth Rates Are Affected in Aerial Developmental Mutants ▿

    PubMed Central

    Jørgensen, Thomas R.; Nielsen, Kristian F.; Arentshorst, Mark; Park, JooHae; van den Hondel, Cees A.; Frisvad, Jens C.; Ram, Arthur F.

    2011-01-01

    Exposure to an aerial environment or severe nutrient limitation induces asexual differentiation in filamentous fungi. Submerged cultivation of Aspergillus niger in carbon- and energy-limited retentostat cultures both induces and fuels conidiation. Physiological and transcriptomic analyses have revealed that this differentiation strongly affects product formation. Since conidiation is inherent in the aerial environment, we hypothesized that product formation near zero growth can be influenced by affecting differentiation or development of aerial hyphae in general. To investigate this idea, three developmental mutants (ΔfwnA, scl-1, and scl-2 mutants) that have no apparent vegetative growth defects were cultured in maltose-limited retentostat cultures. The secondary-metabolite profile of the wild-type strain defined flavasperone, aurasperone B, tensidol B, and two so far uncharacterized compounds as associated with conidium formation, while fumonisins B2, B4, and B6 were characteristic of early response to nutrient limitation by the vegetative mycelium. The developmental mutants responded differently to the severe substrate limitation, which resulted in distinct profiles of growth and product formation. fwnA encodes the polyketide synthase responsible for melanin biosynthesis during aerial differentiation, and we show that conidial melanin synthesis in submerged retentostat cultures and aurasperone B production are fwnA dependent. The scl-1 and scl-2 strains are two UV mutants generated in the ΔfwnA background that displayed reduced asexual conidiation and formed sclerotium-like structures on agar plates. The reduced conidiation phenotypes of the scl-1 and scl-2 strains are reflected in the retentostat cultivation and are accompanied by elimination or severely reduced accumulation of secondary metabolites and distinctly enhanced accumulation of extracellular protein. This investigation shows that submerged conidiation and product formation of a mitosporic fungus

  11. Extracellular complementation and the identification of additional genes involved in aerial mycelium formation in Streptomyces coelicolor.

    PubMed Central

    Nodwell, J R; Yang, M; Kuo, D; Losick, R

    1999-01-01

    Morphogenesis in the bacterium Streptomyces coelicolor involves the formation of a lawn of hair-like aerial hyphae on the colony surface that stands up in the air and differentiates into chains of spores. bld mutants are defective in the formation of this aerial mycelium and grow as smooth, hairless colonies. When certain pairs of bld mutants are grown close to one another on rich sporulation medium, they exhibit extracellular complementation such that one mutant restores aerial mycelium formation to the other. The extracellular complementation relationships of most of the previously isolated bld mutants placed them in a hierarchy of extracellular complementation groups. We have screened for further bld mutants with precautions intended to maximize the discovery of additional genes. Most of the 50 newly isolated mutant strains occupy one of three of the previously described positions in the hierarchy, behaving like bldK, bldC, or bldD mutants. We show that the mutations in some of the strains that behave like bldK are bldK alleles but that others fall in a cluster at a position on the chromosome distinct from that of any known bld gene. We name this locus bldL. By introducing cloned genes into the strains that exhibit bldC or bldD-like extracellular complementation phenotypes, we show that most of these strains are likely to contain mutations in genes other than bldC or bldD. These results indicate that the genetic control of aerial mycelium formation is more complex than previously recognized and support the idea that a high proportion of bld genes are directly or indirectly involved in the production of substances that are exchanged between cells during morphological differentiation. PMID:9927452

  12. Extracellular complementation and the identification of additional genes involved in aerial mycelium formation in Streptomyces coelicolor.

    PubMed

    Nodwell, J R; Yang, M; Kuo, D; Losick, R

    1999-02-01

    Morphogenesis in the bacterium Streptomyces coelicolor involves the formation of a lawn of hair-like aerial hyphae on the colony surface that stands up in the air and differentiates into chains of spores. bld mutants are defective in the formation of this aerial mycelium and grow as smooth, hairless colonies. When certain pairs of bld mutants are grown close to one another on rich sporulation medium, they exhibit extracellular complementation such that one mutant restores aerial mycelium formation to the other. The extracellular complementation relationships of most of the previously isolated bld mutants placed them in a hierarchy of extracellular complementation groups. We have screened for further bld mutants with precautions intended to maximize the discovery of additional genes. Most of the 50 newly isolated mutant strains occupy one of three of the previously described positions in the hierarchy, behaving like bldK, bldC, or bldD mutants. We show that the mutations in some of the strains that behave like bldK are bldK alleles but that others fall in a cluster at a position on the chromosome distinct from that of any known bld gene. We name this locus bldL. By introducing cloned genes into the strains that exhibit bldC or bldD-like extracellular complementation phenotypes, we show that most of these strains are likely to contain mutations in genes other than bldC or bldD. These results indicate that the genetic control of aerial mycelium formation is more complex than previously recognized and support the idea that a high proportion of bld genes are directly or indirectly involved in the production of substances that are exchanged between cells during morphological differentiation. PMID:9927452

  13. Disruption of the Candida albicans TPS1 Gene Encoding Trehalose-6-Phosphate Synthase Impairs Formation of Hyphae and Decreases Infectivity†

    PubMed Central

    Zaragoza, Oscar; Blazquez, Miguel A.; Gancedo, Carlos

    1998-01-01

    The TPS1 gene from Candida albicans, which encodes trehalose-6-phosphate synthase, has been cloned by functional complementation of a tps1 mutant from Saccharomyces cerevisiae. In contrast with the wild-type strain, the double tps1/tps1 disruptant did not accumulate trehalose at stationary phase or after heat shock. Growth of the tps1/tps1 disruptant at 30°C was indistinguishable from that of the wild type. However, at 42°C it did not grow on glucose or fructose but grew normally on galactose or glycerol. At 37°C, the yeast-hypha transition in the mutant in glucose-calf serum medium did not occur. During growth at 42°C, the mutant did not form hyphae in galactose or in glycerol. Some of the growth defects observed may be traced to an unbalanced sugar metabolism that reduces the cellular content of ATP. Mice inoculated with 106 CFU of the tps1/tps1 mutant did not show visible symptoms of infection 16 days after inoculation, while those similarly inoculated with wild-type cells were dead 12 days after inoculation. PMID:9683476

  14. Disruption of the Candida albicans TPS1 gene encoding trehalose-6-phosphate synthase impairs formation of hyphae and decreases infectivity.

    PubMed

    Zaragoza, O; Blazquez, M A; Gancedo, C

    1998-08-01

    The TPS1 gene from Candida albicans, which encodes trehalose-6-phosphate synthase, has been cloned by functional complementation of a tps1 mutant from Saccharomyces cerevisiae. In contrast with the wild-type strain, the double tps1/tps1 disruptant did not accumulate trehalose at stationary phase or after heat shock. Growth of the tps1/tps1 disruptant at 30 degreesC was indistinguishable from that of the wild type. However, at 42 degreesC it did not grow on glucose or fructose but grew normally on galactose or glycerol. At 37 degreesC, the yeast-hypha transition in the mutant in glucose-calf serum medium did not occur. During growth at 42 degreesC, the mutant did not form hyphae in galactose or in glycerol. Some of the growth defects observed may be traced to an unbalanced sugar metabolism that reduces the cellular content of ATP. Mice inoculated with 10(6) CFU of the tps1/tps1 mutant did not show visible symptoms of infection 16 days after inoculation, while those similarly inoculated with wild-type cells were dead 12 days after inoculation. PMID:9683476

  15. Subcompartmentalization by cross-membranes during early growth of Streptomyces hyphae.

    PubMed

    Yagüe, Paula; Willemse, Joost; Koning, Roman I; Rioseras, Beatriz; López-García, María T; Gonzalez-Quiñonez, Nathaly; Lopez-Iglesias, Carmen; Shliaha, Pavel V; Rogowska-Wrzesinska, Adelina; Koster, Abraham J; Jensen, Ole N; van Wezel, Gilles P; Manteca, Ángel

    2016-01-01

    Bacteria of the genus Streptomyces are a model system for bacterial multicellularity. Their mycelial life style involves the formation of long multinucleated hyphae during vegetative growth, with occasional cross-walls separating long compartments. Reproduction occurs by specialized aerial hyphae, which differentiate into chains of uninucleoid spores. While the tubulin-like FtsZ protein is required for the formation of all peptidoglycan-based septa in Streptomyces, canonical divisome-dependent cell division only occurs during sporulation. Here we report extensive subcompartmentalization in young vegetative hyphae of Streptomyces coelicolor, whereby 1 μm compartments are formed by nucleic acid stain-impermeable barriers. These barriers possess the permeability properties of membranes and at least some of them are cross-membranes without detectable peptidoglycan. Z-ladders form during the early growth, but cross-membrane formation does not depend on FtsZ. Thus, a new level of hyphal organization is presented involving unprecedented high-frequency compartmentalization, which changes the old dogma that Streptomyces vegetative hyphae have scarce compartmentalization. PMID:27514833

  16. Subcompartmentalization by cross-membranes during early growth of Streptomyces hyphae

    PubMed Central

    Yagüe, Paula; Willemse, Joost; Koning, Roman I.; Rioseras, Beatriz; López-García, María T.; Gonzalez-Quiñonez, Nathaly; Lopez-Iglesias, Carmen; Shliaha, Pavel V.; Rogowska-Wrzesinska, Adelina; Koster, Abraham J.; Jensen, Ole N.; van Wezel, Gilles P.; Manteca, Ángel

    2016-01-01

    Bacteria of the genus Streptomyces are a model system for bacterial multicellularity. Their mycelial life style involves the formation of long multinucleated hyphae during vegetative growth, with occasional cross-walls separating long compartments. Reproduction occurs by specialized aerial hyphae, which differentiate into chains of uninucleoid spores. While the tubulin-like FtsZ protein is required for the formation of all peptidoglycan-based septa in Streptomyces, canonical divisome-dependent cell division only occurs during sporulation. Here we report extensive subcompartmentalization in young vegetative hyphae of Streptomyces coelicolor, whereby 1 μm compartments are formed by nucleic acid stain-impermeable barriers. These barriers possess the permeability properties of membranes and at least some of them are cross-membranes without detectable peptidoglycan. Z-ladders form during the early growth, but cross-membrane formation does not depend on FtsZ. Thus, a new level of hyphal organization is presented involving unprecedented high-frequency compartmentalization, which changes the old dogma that Streptomyces vegetative hyphae have scarce compartmentalization. PMID:27514833

  17. Dynamics of Aerial Tower Formation in Bacillus subtilis Biofilms

    NASA Astrophysics Data System (ADS)

    Sinha, Naveen; Seminara, Agnese; Wilking, James; Brenner, Michael; Weitz, Dave

    2012-02-01

    Biofilms are highly-organized colonies of bacteria that form on surfaces. These colonies form sophisticated structures which make them robust and difficult to remove from environments such as catheters, where they pose serious infection problems. Previous work has shown that sub-mm sized aerial towers form on the surface of Bacillus subtilis colony biofilms. Spore-formation is located preferentially at the tops of these towers, known as fruiting bodies, which aid in the dispersal and propagation of the colony to new sites. The formation of towers is strongly affected by the quorum-sensing molecule surfactin and the cannibalism pathway of the bacteria. In the present work, we use confocal fluorescence microscopy to study the development of individual fruiting bodies, allowing us to visualize the time-dependent spatial distribution of matrix-forming and sporulating bacteria within the towers. With this information, we investigate the physical mechanisms, such as surface tension and polymer concentration gradients, that drive the formation of these structures.

  18. Trajectory optimization for unmanned aerial vehicle formation reconfiguration

    NASA Astrophysics Data System (ADS)

    Kim, Hyoung-seok; Kim, Youdan

    2014-01-01

    The results of trajectory optimization to reconfigure unmanned aerial vehicle (UAV) formation in the event of a critical failure are presented. The formation reconfiguration process includes two distinct manoeuvres: an escape manoeuvre for a malfunctioning UAV and a replacement movement for an alternative UAV related to its position. This article deals with both manoeuvres but focuses more on the replacement movement. The trajectory optimization problem of the escape manoeuvre is formulated as a minimum-time problem to reduce the possibility of collisions resulting from a failure, whereas the problem of the replacement movement is formulated as a final-time fixed minimum-fuel problem to secure the durability of the group of UAVs. These problems are solved by means of sequential quadratic programming. To evaluate the performance of the optimization results, fuel consumption for the replacement movement is considered and optimization of a three-phase reference trajectory is performed. The results show that the trajectory optimization reduces the fuel consumption and saves time.

  19. KRE5 Gene Null Mutant Strains of Candida albicans Are Avirulent and Have Altered Cell Wall Composition and Hypha Formation Properties

    PubMed Central

    Herrero, Ana B.; Magnelli, Paula; Mansour, Michael K.; Levitz, Stuart M.; Bussey, Howard; Abeijon, Claudia

    2004-01-01

    The UDP-glucose:glycoprotein glucosyltransferase (UGGT) is an endoplasmic reticulum sensor for quality control of glycoprotein folding. Saccharomyces cerevisiae is the only eukaryotic organism so far described lacking UGGT-mediated transient reglucosylation of N-linked oligosaccharides. The only gene in S. cerevisiae with similarity to those encoding UGGTs is KRE5. S. cerevisiae KRE5 deletion strains show severely reduced levels of cell wall β-1,6-glucan polymer, aberrant morphology, and extremely compromised growth or lethality, depending on the strain background. Deletion of both alleles of the Candida albicans KRE5 gene gives rise to viable cells that are larger than those of the wild type (WT), tend to aggregate, have enlarged vacuoles, and show major cell wall defects. C. albicans kre5/kre5 mutants have significantly reduced levels of β-1,6-glucan and more chitin and β-1,3-glucan and less mannoprotein than the WT. The remaining β-1,6-glucan, about 20% of WT levels, exhibits a β-1,6-endoglucanase digestion pattern, including a branch point-to-linear stretch ratio identical to that of WT strains, suggesting that Kre5p is not a β-1,6-glucan synthase. C. albicans KRE5 is a functional homologue of S. cerevisiae KRE5; it partially complements both the growth defect and reduced cell wall β-1,6-glucan content of S. cerevisiae kre5 viable mutants. C. albicans kre5/kre5 homozygous mutant strains are unable to form hyphae in several solid and liquid media, even in the presence of serum, a potent inducer of the dimorphic transition. Surprisingly the mutants do form hyphae in the presence of N-acetylglucosamine. Finally, C. albicans KRE5 homozygous mutant strains exhibit a 50% reduction in adhesion to human epithelial cells and are completely avirulent in a mouse model of systemic infection. PMID:15590817

  20. Property of the Large Format Digital Aerial Camera Dmc II

    NASA Astrophysics Data System (ADS)

    Jacobsen, K.; Neumann, K.

    2012-07-01

    Z/I Imaging introduced with the DMC II 140, 230 and 250 digital aerial cameras with a very large format CCD for the panchromatic channel. The CCDs have with 140 / 230 / 250 mega pixel a size not available in photogrammetry before. CCDs in general have a very high relative accuracy, but the overall geometry has to be checked as well as the influence of not flat CCDs. A CCD with a size of 96mm × 82mm must have a flatness or knowledge of flatness in the range of 1μm if the camera accuracy in the range of 1.3μm shall not be influenced. The DMC II cameras have been evaluated with three different flying heights leading to 5cm, 9cm and 15cm or 20cm GSD, crossing flight lines and 60% side lap. The optimal test conditions guaranteed the precise determination of the object coordinates as well as the systematic image errors. All three camera types show only very small systematic image errors, ranging in the root mean square between 0.12μm up to 0.3μm with extreme values not exceeding 1.6μm. The remaining systematic image errors, determined by analysis of the image residuals and not covered by the additional parameters, are negligible. A standard deviation of the object point heights below the GSD, determined at independent check points, even in blocks with just 20% side lap and 60% end lap is standard. Corresponding to the excellent image geometry the object point coordinates are only slightly influenced by the self calibration. For all DMCII types the handling of image models for data acquisition must not be supported by an improvement of the image coordinates by the determined systematic image errors. Such an improvement up to now is not standard for photogrammetric software packages. The advantage of a single monolithic CCD is obvious. An edge analysis of pan-sharpened DMC II 250 images resulted in factors for the effective resolution below 1.0. The result below 1.0 is only possible by contrast enhancement, but this requires with low image noise, demonstrating the

  1. Localization and role of MYO-1, an endocytic protein in hyphae of Neurospora crassa.

    PubMed

    Lara-Rojas, Fernando; Bartnicki-García, Salomón; Mouriño-Pérez, Rosa R

    2016-03-01

    The subapical endocytic collar is a prominent feature of hyphae of Neurospora crassa. It comprises a dynamic collection of actin patches associated with a number of proteins required for endocytosis, namely, ARP-2/3 complex, fimbrin, coronin, etc. We presently show that MYO-1 is another key component of this endocytic collar. A myo-1 sequence was identified in the genome of N. crassa and used it to generate a strain with a myo-1-sgfp allele under the ccg1 promoter. Examination of living hyphae by confocal microscopy, revealed MYO-1-GFP located mainly as a dynamic collection of small patches arranged in collar-like fashion in the hyphal subapex. Dual tagging showed MYO-1-GFP partially colocalized with two other endocytic proteins, fimbrin and coronin. MYO-1 was also present during septum formation. By recovering a viable strain, albeit severely inhibited, after deletion of myo-1, it was possible to investigate the phenotypic consequences of the elimination of MYO-1. Deletion of myo-1 caused a severe reduction in growth rate (95%), near absence of aerial mycelium and no conidiation. A reduced uptake of the lipophilic dye FM4-64 indicated a deficiency in endocytosis in the Δmyo-1 mutant. Hyphae were produced by the Δmyo-1 mutant but their morphogenesis was severely affected; hyphal morphology was distorted displaying irregular periods of isotropic and polarized growth. The morphological alterations were accompanied, and presumably caused, by a disruption in the organization and dynamics of a myosin-deprived actin cytoskeleton that, ultimately, compromised the stability and function of the Spitzenkörper as a vesicle supply center. PMID:26805950

  2. Mechanisms of Bacterial (Serratia marcescens) Attachment to, Migration along, and Killing of Fungal Hyphae.

    PubMed

    Hover, Tal; Maya, Tal; Ron, Sapir; Sandovsky, Hani; Shadkchan, Yana; Kijner, Nitzan; Mitiagin, Yulia; Fichtman, Boris; Harel, Amnon; Shanks, Robert M Q; Bruna, Roberto E; García-Véscovi, Eleonora; Osherov, Nir

    2016-05-01

    We have found a remarkable capacity for the ubiquitous Gram-negative rod bacteriumSerratia marcescensto migrate along and kill the mycelia of zygomycete molds. This migration was restricted to zygomycete molds and several basidiomycete species. No migration was seen on any molds of the phylum Ascomycota.S. marcescensmigration did not require fungal viability or surrounding growth medium, as bacteria migrated along aerial hyphae as well.S. marcescensdid not exhibit growth tropism toward zygomycete mycelium. Bacterial migration along hyphae proceeded only when the hyphae grew into the bacterial colony.S. marcescenscells initially migrated along the hyphae, forming attached microcolonies that grew and coalesced to generate a biofilm that covered and killed the mycelium. Flagellum-defective strains ofS. marcescenswere able to migrate along zygomycete hyphae, although they were significantly slower than the wild-type strain and were delayed in fungal killing. Bacterial attachment to the mycelium does not necessitate type 1 fimbrial adhesion, since mutants defective in this adhesin migrated equally well as or faster than the wild-type strain. Killing does not depend on the secretion ofS. marcescenschitinases, as mutants in which all three chitinase genes were deleted retained wild-type killing abilities. A better understanding of the mechanisms by whichS. marcescensbinds to, spreads on, and kills fungal hyphae might serve as an excellent model system for such interactions in general; fungal killing could be employed in agricultural fungal biocontrol. PMID:26896140

  3. ςBldN, an Extracytoplasmic Function RNA Polymerase Sigma Factor Required for Aerial Mycelium Formation in Streptomyces coelicolor A3(2)

    PubMed Central

    Bibb, Maureen J.; Molle, Virginie; Buttner, Mark J.

    2000-01-01

    Sporulation mutants of Streptomyces coelicolor appear white because they are defective in the synthesis of the gray polyketide spore pigment, and such white (whi) mutants have been used to define 13 sporulation loci. whiN, one of five new whi loci identified in a recent screen of NTG (N-methyl-N′-nitro-N-nitrosoguanidine)-induced whi strains (N. J. Ryding et al., J. Bacteriol. 181:5419–5425, 1999), was defined by two mutants, R112 and R650. R650 produced frequent spores that were longer than those of the wild type. In contrast, R112 produced long, straight, undifferentiated hyphae, although rare spore chains were observed, sometimes showing highly irregular septum placement. Subcloning and sequencing showed that whiN encodes a member of the extracytoplasmic function subfamily of RNA polymerase sigma factors and that the sigma factor has an unusual N-terminal extension of approximately 86 residues that is not present in other sigma factors. A constructed whiN null mutant failed to form aerial mycelium (the “bald” phenotype) and, as a consequence, whiN was renamed bldN. This observation was not totally unexpected because, on some media, the R112 point mutant produced substantially less aerial mycelium than its parent, M145. The bldN null mutant did not fit simply into the extracellular signaling cascade proposed for S. coelicolor bld mutants. Expression of bldN was analyzed during colony development in wild-type and aerial mycelium-deficient bld strains. bldN was transcribed from a single promoter, bldNp. bldN transcription was developmentally regulated, commencing approximately at the time of aerial mycelium formation, and depended on bldG and bldH, but not on bldA, bldB, bldC, bldF, bldK, or bldJ or on bldN itself. Transcription from the p1 promoter of the response-regulator gene bldM depended on bldN in vivo, and the bldMp1 promoter was shown to be a direct biochemical target for ςBldN holoenzyme in vitro. PMID:10913095

  4. Selected reading in agricultural applications of small-format aerial photography

    USGS Publications Warehouse

    1980-01-01

    This collection of material has been assembled in response to a growing.interest in the use of low-cost, small-format aerial photography in the management of agricultural resources. Together, these articles serve to document the prevailing level of interest in the subject and provide an insight as to what can reasonably be expected from the use of this powerful agricultural management tool. 

  5. Two matrix approaches for aerial image formation obtained by extending and modifying the transmission cross coefficients.

    PubMed

    Yamazoe, Kenji

    2010-06-01

    This paper physically compares two different matrix representations of partially coherent imaging with the introduction of matrices E and Z, containing the source, object, and pupil. The matrix E is obtained by extending the Hopkins transmission cross coefficient (TCC) approach such that the pupil function is shifted while the matrix Z is obtained by shifting the object spectrum. The aerial image I can be written as a convex quadratic form I = = , where |phi> is a column vector representing plane waves. It is shown that rank(Z) < or = rank(E) = rank(T) = N, where T is the TCC matrix and N is the number of the point sources for a given unpolarized illumination. Therefore, the matrix Z requires fewer than N eigenfunctions for a complete aerial image formation, while the matrix E or T always requires N eigenfunctions. More importantly, rank(Z) varies depending on the degree of coherence determined by the von Neumann entropy, which is shown to relate to the mutual intensity. For an ideal pinhole as an object, emitting spatially coherent light, only one eigenfunction--i.e., the pupil function--is enough to describe the coherent imaging. In this case, we obtain rank(Z) = 1 and the pupil function as the only eigenfunction regardless of the illumination. However, rank(E) = rank(T) = N even when the object is an ideal pinhole. In this sense, aerial image formation with the matrix Z is physically more meaningful than with the matrix E. The matrix Z is decomposed as B(dagger)B, where B is a singular matrix, suggesting that the matrix B as well as Z is a principal operator characterizing the degree of coherence of the partially coherent imaging. PMID:20508699

  6. Multicopter-based small format aerial photography using free and open source photogrammetry

    NASA Astrophysics Data System (ADS)

    Davis, Robert Matthew

    A process is described to convert aerial photographs from flat images to 3D point clouds and then convert into height maps to be used as pseudo digital elevation models for surface modeling. All software used in the process is either free or open source. The process uses a DJI Phanton multicoper and two Canon Point and Shoot digital cameras. One camera is unaltered, and a second camera is modified to produce infrared images. A DJI Phantom FC-40 multicopter is used as the aerial platform to carry the cameras. Multiple paths are described to convert from still images (or video to still images) to N-view matches, followed by sparse point clouds then dense point clouds. Point clouds are distinct 3D points charted in an XYZ coordinate system. The dense point clouds can be converted into 3D models for viewing and analysis. A height map is extracted from the point cloud and surface images (in raster format) are created and then used in QGIS or ArcMap as pseudo digital elevation models for surface modeling. Finally, the digital elevation models are evaluated in comparison to similar LIDAR images. Keywords: Passive Remote Sensing; LIDAR; Spatial Resolution.

  7. Suitability of low cost commercial off-the-shelf aerial platforms and consumer grade digital cameras for small format aerial photography

    NASA Astrophysics Data System (ADS)

    Turley, Anthony Allen

    Many research projects require the use of aerial images. Wetlands evaluation, crop monitoring, wildfire management, environmental change detection, and forest inventory are but a few of the applications of aerial imagery. Low altitude Small Format Aerial Photography (SFAP) is a bridge between satellite and man-carrying aircraft image acquisition and ground-based photography. The author's project evaluates digital images acquired using low cost commercial digital cameras and standard model airplanes to determine their suitability for remote sensing applications. Images from two different sites were obtained. Several photo missions were flown over each site, acquiring images in the visible and near infrared electromagnetic bands. Images were sorted and analyzed to select those with the least distortion, and blended together with Microsoft Image Composite Editor. By selecting images taken within minutes apart, radiometric qualities of the images were virtually identical, yielding no blend lines in the composites. A commercial image stitching program, Autopano Pro, was purchased during the later stages of this study. Autopano Pro was often able to mosaic photos that the free Image Composite Editor was unable to combine. Using telemetry data from an onboard data logger, images were evaluated to calculate scale and spatial resolution. ERDAS ER Mapper and ESRI ArcGIS were used to rectify composite images. Despite the limitations inherent in consumer grade equipment, images of high spatial resolution were obtained. Mosaics of as many as 38 images were created, and the author was able to record detailed aerial images of forest and wetland areas where foot travel was impractical or impossible.

  8. Cloning and analysis of a gene cluster from Streptomyces coelicolor that causes accelerated aerial mycelium formation in Streptomyces lividans.

    PubMed Central

    Ma, H; Kendall, K

    1994-01-01

    We describe the cloning and analysis of two overlapping DNA fragments from Streptomyces coelicolor that cause aerial mycelium to appear more rapidly than usual when introduced into Streptomyces lividans on a low-copy-number plasmid vector. Colonies of S. lividans TK64 harboring either clone produce visible aerial mycelia after only 48 h of growth, rather than the usual 72 to 96 h. From deletion and sequence analysis, this rapid aerial mycelium (Ram) phenotype appears to be due to a cluster of three genes that we have designated ramA, ramB, and ramR. Both ramA and ramB potentially encode 65-kDa proteins with homology to ATP-dependent membrane-translocating proteins. A chromosomal ramB disruption mutant of S. lividans was found to be severely defective in aerial mycelium formation. ramR could encode a 21-kDa protein with significant homology to the UhpA subset of bacterial two-component response regulator proteins. The overall organization and potential proteins encoded by the cloned DNA suggest that this is the S. coelicolor homolog of the amf gene cluster that has been shown to be important for aerial mycelium formation in Streptomyces griseus. However, despite the fact that the two regions probably have identical functions, there is relatively poor homology between the two gene clusters at the DNA sequence level. Images PMID:8206859

  9. Real-time Estimation of the Gaseous Plume Using a Formation of Unmanned Aerial Vehicles

    NASA Astrophysics Data System (ADS)

    Demetriou, Michael; Egorova, Tatiana; Gatsonis, Nikolaos

    2015-11-01

    This work proposes an approach for the real-time estimation of gaseous plume caused by a source moving along an unknown trajectory using a formation of seven unmanned aerial vehicles (UAVs) with concentration sensors onboard. The process of gas release is modeled with unsteady advection-diffusion equation and is solved numerically using a finite volume method (FVM) with total variation diminishing (TVD) scheme. The concentration estimator is based on the Luenberger observer. The UAVs are assumed to maintain a rigid flying formation throughout the process. The UAVs dynamics is described by the point-mass model of a fixed wing aircraft. The guidance of the leader UAV is coupled to the performance of the estimator through Lyapunov redesign methods. An appropriate choice of the Lyapunov functional results in the desired direction for the leader UAV, which is expressed in terms of the concentration estimation error and the error gradients at the sensors locations. For computational efficiency in the real-time applications the computational grid for the estimator is adapted dynamically to provide higher resolution near the flying formation. Numerical tests are implemented to illustrate the performance of the proposed approach. The work is supported by the Dynamics and Control Program at AFOSR, grant FA9550-12-1-0114.

  10. Dual amyloid domains promote differential functioning of the chaplin proteins during Streptomyces aerial morphogenesis

    PubMed Central

    Capstick, David S.; Jomaa, Ahmad; Hanke, Chistopher; Ortega, Joaquin; Elliot, Marie A.

    2011-01-01

    The chaplin proteins are functional amyloids found in the filamentous Streptomyces bacteria. These secreted proteins are required for the aerial development of Streptomyces coelicolor, and contribute to an intricate rodlet ultrastructure that decorates the surfaces of aerial hyphae and spores. S. coelicolor encodes eight chaplin proteins. Previous studies have revealed that only three of these proteins (ChpC, ChpE, and ChpH) are necessary for promoting aerial development, and of these three, ChpH is the primary developmental determinant. Here, we show that the model chaplin, ChpH, contains two amyloidogenic domains: one in the N terminus and one in the C terminus of the mature protein. These domains have different polymerization properties as determined using fluorescence spectroscopy, secondary structure analyses, and electron microscopy. We coupled these in vitro assays with in vivo genetic studies to probe the connection between ChpH amyloidogenesis and its biological function. Using mutational analyses, we demonstrated that both N- and C-terminal amyloid domains of ChpH were required for promoting aerial hypha formation, while the N-terminal domain was dispensable for assembly of the rodlet ultrastructure. These results suggest that there is a functional differentiation of the dual amyloid domains in the chaplin proteins. PMID:21628577

  11. Vesicular thick-walled swollen hyphae in pulmonary zygomycosis.

    PubMed

    Kimura, Masatomo; Ito, Hiroyuki

    2009-03-01

    An autopsy case of pulmonary zygomycosis in a patient with rheumatoid arthritis on immunosuppressive therapy is presented herein. There was a pulmonary cavitated infarct caused by mycotic thrombosis. Thin-walled narrow hyphae and vesicular thick-walled swollen hyphae were found on the pleural surface and in the necrotic tissue at the periphery of the cavity. Findings of such shaped fungal elements may cause erroneous histopathological diagnosis because pauciseptate broad thin-walled hyphae are usually the only detectable fungal elements in zygomycosis tissue. Although immunohistochemistry confirmed these unusual elements to be zygomycetous in the present case, it is important for the differential diagnosis to be aware that zygomycetes can form thin narrow hyphae and vesicular thick-walled swollen hyphae. PMID:19261095

  12. The sky is the limit? 20 years of small-format aerial photography taken from UAS for monitoring geomorphological processes

    NASA Astrophysics Data System (ADS)

    Marzolff, Irene

    2014-05-01

    One hundred years after the first publication on aerial photography taken from unmanned aerial platforms (Arthur Batut 1890), small-format aerial photography (SFAP) became a distinct niche within remote sensing during the 1990s. Geographers, plant biologists, archaeologists and other researchers with geospatial interests re-discovered the usefulness of unmanned platforms for taking high-resolution, low-altitude photographs that could then be digitized and analysed with geographical information systems, (softcopy) photogrammetry and image processing techniques originally developed for digital satellite imagery. Even before the ubiquity of digital consumer-grade cameras and 3D analysis software accessible to the photogrammetric layperson, do-it-yourself remote sensing using kites, blimps, drones and micro air vehicles literally enabled the questing researcher to get their own pictures of the world. As a flexible, cost-effective method, SFAP offered images with high spatial and temporal resolutions that could be ideally adapted to the scales of landscapes, forms and distribution patterns to be monitored. During the last five years, this development has been significantly accelerated by the rapid technological advancements of GPS navigation, autopiloting and revolutionary softcopy-photogrammetry techniques. State-of-the-art unmanned aerial systems (UAS) now allow automatic flight planning, autopilot-controlled aerial surveys, ground control-free direct georeferencing and DEM plus orthophoto generation with centimeter accuracy, all within the space of one day. The ease of use of current UAS and processing software for the generation of high-resolution topographic datasets and spectacular visualizations is tempting and has spurred the number of publications on these issues - but which advancements in our knowledge and understanding of geomorphological processes have we seen and can we expect in the future? This presentation traces the development of the last two decades

  13. Monocyte-mediated damage to Rhizopus oryzae hyphae in vitro.

    PubMed Central

    Diamond, R D; Haudenschild, C C; Erickson, N F

    1982-01-01

    Clinicopathological correlations from human cases and experimental animal studies suggest that neutrophils are critical components of the host response to mucormycosis but that other cellular defense mechanisms appear to be important as well. Since our previous studies demonstrated that Rhizopus oryzae hyphae which are too large to be ingested completely can be damaged and probably killed by human neutrophils, we studied the antihyphal activity of human monocytes. As with neutrophils, light and electron microscopic studies indicated that monocytes attached to hyphae and appeared to destroy them in the absence of serum. As judged by our previously described assay for the leukocyte-induced inhibition of [14C]uracil uptake by hyphae, quantitative damage to hyphae by monocytes was 40.8 +/- 2.2% in 54 experiments. Neither attachment to nor damage of hyphae by monocytes was augmented by the presence of 10% human serum. As with neutrophils, monocyte-mediated damage of R. oryzae was significantly decreased by some inhibitors of oxidative metabolism and scavengers of the potentially microbicidal oxidative leukocyte products, which included 10(-4)M sodium azide, 10 (-3) M sodium cyanide, catalase, 10(-3) M histidine, 10(-3) M tryptophan, and 10(-4) M 1,4-diazobicyclo[2.2.2]octane but not superoxide dismutase, 1.4 X 10(-2) M dimethyl sulfoxide, and 4.0 X 10(-1) M mannitol. Moreover, monocytes from three patients with chronic granulomatous disease failed to damage hyphae at all. In contrast to our previous data for neutrophils, polyanions (10(-5) M polyaspartic or polyglutamic acid) did not inhibit monocyte-mediated hyphal damage. Thus, monocytes can damage and probably kill R. oryzae hyphae by oxidative mechanisms and so may be involved in host defense mechanisms against mucormycosis. Images PMID:7141693

  14. Human Neutrophils Use Different Mechanisms To Kill Aspergillus fumigatus Conidia and Hyphae: Evidence from Phagocyte Defects.

    PubMed

    Gazendam, Roel P; van Hamme, John L; Tool, Anton T J; Hoogenboezem, Mark; van den Berg, J Merlijn; Prins, Jan M; Vitkov, Ljubomir; van de Veerdonk, Frank L; van den Berg, Timo K; Roos, Dirk; Kuijpers, Taco W

    2016-02-01

    Neutrophils are known to play a pivotal role in the host defense against Aspergillus infections. This is illustrated by the prevalence of Aspergillus infections in patients with neutropenia or phagocyte functional defects, such as chronic granulomatous disease. However, the mechanisms by which human neutrophils recognize and kill Aspergillus are poorly understood. In this work, we have studied in detail which neutrophil functions, including neutrophil extracellular trap (NET) formation, are involved in the killing of Aspergillus fumigatus conidia and hyphae, using neutrophils from patients with well-defined genetic immunodeficiencies. Recognition of conidia involves integrin CD11b/CD18 (and not dectin-1), which triggers a PI3K-dependent nonoxidative intracellular mechanism of killing. When the conidia escape from early killing and germinate, the extracellular destruction of the Aspergillus hyphae needs opsonization by Abs and involves predominantly recognition via Fcγ receptors, signaling via Syk, PI3K, and protein kinase C to trigger the production of toxic reactive oxygen metabolites by the NADPH oxidase and myeloperoxidase. A. fumigatus induces NET formation; however, NETs did not contribute to A. fumigatus killing. Thus, our findings reveal distinct killing mechanisms of Aspergillus conidia and hyphae by human neutrophils, leading to a comprehensive insight in the innate antifungal response. PMID:26718340

  15. An alginate-like exopolysaccharide biosynthesis gene cluster involved in biofilm aerial structure formation by Pseudomonas alkylphenolia.

    PubMed

    Lee, Kyoung; Lim, Eun Jin; Kim, Keun Soo; Huang, Shir-Ly; Veeranagouda, Yaligara; Rehm, Bernd H A

    2014-05-01

    Pseudomonas alkylphenolia is known to form different types of multicellular structures depending on the environmental stimuli. Aerial structures formed during vapor p-cresol utilization are unique. Transposon mutants that showed a smooth colony phenotype failed to form a differentiated biofilm, including aerial structures and pellicles, and showed deficient surface spreading motility. The transposon insertion sites were located to a gene cluster designated epm (extracellular polymer matrix), which comprises 11 ORFs in the same transcriptional orientation. The putative proteins encoded by the genes in the epm cluster showed amino acid sequence homology to those found in the alginate biosynthesis gene clusters, e.g., in Pseudomonas aeruginosa at similarity levels of 32.3-86.4 %. This overall resemblance indicated that the epm gene cluster encodes proteins that mediate the synthesis of an exopolysaccharide composed of uronic acid(s) similar to alginate. Our preliminary results suggested that the epm-derived polymer is a substituted polymannuronic acid. Gene clusters homologous to the epm gene cluster are found in the genomes of a few species of the genera Pseudomonas, Alcanivorax, and Marinobacter. A mutational analysis showed that the epmJ and epmG genes encoding putative exopolysaccharide-modifying enzymes are required to form multicellular structures. An analysis of the activity of the promoter P epmD using a transcriptional fusion to the green fluorescence protein gene showed that the epm genes are strongly expressed at the tips of the specialized aerial structures. Our results suggested that the epm gene cluster is involved in the formation of a scaffold polysaccharide that is required to form multicellular structures in P. alkylphenolia. PMID:24493568

  16. Farnesol and Cyclic AMP Signaling Effects on the Hypha-to-Yeast Transition in Candida albicans

    PubMed Central

    Lindsay, Allia K.; Deveau, Aurélie; Piispanen, Amy E.

    2012-01-01

    Candida albicans, a fungal pathogen of humans, regulates its morphology in response to many environmental cues and this morphological plasticity contributes to virulence. Farnesol, an autoregulatory molecule produced by C. albicans, inhibits the induction of hyphal growth by inhibiting adenylate cyclase (Cyr1). The role of farnesol and Cyr1 in controlling the maintenance of hyphal growth has been less clear. Here, we demonstrate that preformed hyphae transition to growth as yeast in response to farnesol and that strains with increased cyclic AMP (cAMP) signaling exhibit more resistance to farnesol. Exogenous farnesol did not induce the hypha-to-yeast transition in mutants lacking the Tup1 or Nrg1 transcriptional repressors in embedded conditions. Although body temperature is not required for embedded hyphal growth, we found that the effect of farnesol on the hypha-to-yeast transition varies inversely with temperature. Our model of Cyr1 activity being required for filamentation is also supported by our liquid assay data, which show increased yeast formation when preformed filaments are treated with farnesol. Together, these data suggest that farnesol can modulate morphology in preformed hyphal cells and that the repression of hyphal growth maintenance likely occurs through the inhibition of cAMP signaling. PMID:22886999

  17. Optical design of high resolution and large format CCD airborne remote sensing camera on unmanned aerial vehicle

    NASA Astrophysics Data System (ADS)

    Qian, Yixian; Cheng, Xiaowei; Shao, Jie

    2010-11-01

    Unmanned aerial vehicle remote sensing (UAVRS) is lower in cost, flexible on task arrangement and automatic and intelligent in application, it has been used widely for mapping, surveillance, reconnaissance and city planning. Airborne remote sensing missions require sensors with both high resolution and large fields of view, large format CCD digital airborne imaging systems are now a reality. A refractive system was designed to meet the requirements with the help of code V software, It has a focal length of 150mm, F number of 5.6, waveband of 0.45~0.7um, and field of view reaches 20°. It is shown that the value of modulation transfer function is higher than 0.5 at 55lp/mm, distortion is less than 0.1%, image quality reaches the diffraction limit. The system with large format CCD and wide field can satisfy the demand of the wide ground overlay area and high resolution. The optical system with simpler structure, smaller size and lighter weight, can be used in airborne remote sensing.

  18. Analysis of Biophysical Mechanisms of Gilgai Microrelief Formation in Dryland Swelling Soils Using Ultra-High Resolution Aerial Imagery

    NASA Astrophysics Data System (ADS)

    Krell, N.; DeCarlo, K. F.; Caylor, K. K.

    2015-12-01

    Microrelief formations ("gilgai"), which form due to successive wetting-drying cycles typical of swelling soils, provide ecological hotspots for local fauna and flora, including higher and more robust vegetative growth. The distribution of these gilgai suggests a remarkable degree of regularity. However, it is unclear to what extent the mechanisms that drive gilgai formation are physical, such as desiccation-induced fracturing, or biological in nature, namely antecedent vegetative clustering. We investigated gilgai genesis and pattern formation in a 100 x 100 meter study area with swelling soils in a semiarid grassland at the Mpala Research Center in central Kenya. Our ongoing experiment is composed of three 9m2 treatments: we removed gilgai and limited vegetative growth by herbicide application in one plot, allowed for unrestricted seed dispersal in another, and left gilgai unobstructed in a control plot. To estimate the spatial frequencies of the repeating patterns of gilgai, we obtained ultra-high resolution (0.01-0.03m/pixel) images with an unmanned aerial vehicle (UAV) from which digital elevation models were also generated. Geostatistical analyses using wavelet and fourier methods in 1- and 2-dimensions were employed to characterize gilgai size and distribution. Preliminary results support regular spatial patterning across the gilgaied landscape and heterogeneities may be related to local soil properties and biophysical influences. Local data on gilgai and fracture characteristics suggest that gilgai form at characteristic heights and spacing based on fracture morphology: deep, wide cracks result in large, highly vegetated mounds whereas shallow cracks, induced by animal trails, are less correlated with gilgai size and shape. Our experiments will help elucidate the links between shrink-swell processes and gilgai-vegetation patterning in high activity clay soils and advance our understanding of the mechanisms of gilgai formation in drylands.

  19. Characterization of a gamma-butyrolactone synthetase gene homologue (stcA) involved in bafilomycin production and aerial mycelium formation in Streptomyces sp. SBI034.

    PubMed

    Intra, Bungonsiri; Euanorasetr, Jirayut; Nihira, Takuya; Panbangred, Watanalai

    2016-03-01

    Streptomyces SBI034 produces several bafilomycin derivatives. Its afsA homologue (stcA) and putative γ-butyrolactone receptor gene (stcB) were cloned. Construction of a stcA disruptant (stcA gene knockout) resulted in complete abolishment of all bafilomycin production. Electron microscopic analysis showed a defect of aerial mycelium formation and sporulation in the stcA disruptant. Restoration of all phenotypic defects and bafilomycin production was observed in a stcA complemented strain. Addition of exogenous γ-butyrolactone (GBL) extracted from the culture broth of the wild-type strain could stimulate the aerial mycelium and spore formation of the stcA disruptant. These results suggest that stcA plays a role in GBL-mediated regulation of bafilomycin biosynthesis and morphological development in Streptomyces strain SBI034. PMID:26603758

  20. Vacuole inheritance regulates cell size and branching frequency of Candida albicans hyphae

    PubMed Central

    Veses, Veronica; Richards, Andrea; Gow, Neil A R

    2008-01-01

    Hyphal growth of Candida albicans is characterized by asymmetric cell divisions in which the subapical mother cell inherits most of the vacuolar space and becomes cell cycle arrested in G1, while the apical daughter cell acquires most of the cell cytoplasm and progresses through G1 into the next mitotic cell cycle. Consequently, branch formation in hyphal compartments is delayed until sufficient cytoplasm is synthesized to execute the G1 ‘START’ function. To test the hypothesis that this mode of vacuole inheritance determines cell cycle progression and therefore the branching of hyphae, eight tetracycline-regulated conditional mutants were constructed that were affected at different stages of the vacuole inheritance pathway. Under repressing conditions, vac7, vac8 and fab1 mutants generated mycelial compartments with more symmetrically distributed vacuoles and increased branching frequencies. Repression of VAC1, VAM2 and VAM3 resulted in sparsely branched hyphae, with large vacuoles and enlarged hyphal compartments. Therefore, during hyphal growth of C. albicans the cell cycle, growth and branch formation can be uncoupled, resulting in the investment of cytoplasm to support hyphal extension at the expense of hyphal branching. PMID:19040629

  1. Aerial Explorers

    NASA Technical Reports Server (NTRS)

    Young, Larry A.; Pisanich, Greg; Ippolito, Corey

    2005-01-01

    This paper presents recent results from a mission architecture study of planetary aerial explorers. In this study, several mission scenarios were developed in simulation and evaluated on success in meeting mission goals. This aerial explorer mission architecture study is unique in comparison with previous Mars airplane research activities. The study examines how aerial vehicles can find and gain access to otherwise inaccessible terrain features of interest. The aerial explorer also engages in a high-level of (indirect) surface interaction, despite not typically being able to takeoff and land or to engage in multiple flights/sorties. To achieve this goal, a new mission paradigm is proposed: aerial explorers should be considered as an additional element in the overall Entry, Descent, Landing System (EDLS) process. Further, aerial vehicles should be considered primarily as carrier/utility platforms whose purpose is to deliver air-deployed sensors and robotic devices, or symbiotes, to those high-value terrain features of interest.

  2. Characterization of mannitol in Curvularia protuberata hyphae by FTIR and Raman spectromicroscopy

    USGS Publications Warehouse

    Rodriguez, Russell J.; Isenor, Merrill; Kaminsky, Susan G.W.; Redman, S.; Gough, Kathleen M.

    2010-01-01

    FTIR and Raman spectromicroscopy were used to characterize the composition of Curvularia protuberata hyphae, and to compare a strain isolated from plants inhabiting geothermal soils with a non-geothermal isolate. Thermal IR source images of hyphae have been acquired with a 64 × 64 element focal plane array detector; single point IR spectra have been obtained with synchrotron source light. In some C. protuberata hyphae, we have discovered the spectral signature of crystalline mannitol, a fungal polyol with complex protective roles. With FTIR-FPA imaging, we have determined that the protein content in cells remains fairly constant throughout the length of a hypha, whereas the mannitol is found at discrete, irregular locations. This is the first direct observation of mannitol in intact fungal hyphae. Since the concentration of mannitol in cells varies with respect to position and is not present in all hyphae, this discovery may be related to habitat adaptation, fungal structure and growth stages.

  3. Characterization of mannitol in Curvularia protuberata hyphae by FTIR and Raman spectromicroscopy

    USGS Publications Warehouse

    Isenor, M.; Kaminskyj, S.G.W.; Rodriguez, R.J.; Redman, R.S.; Gough, K.M.

    2010-01-01

    FTIR and Raman spectromicroscopy were used to characterize the composition of Curvularia protuberata hyphae, and to compare a strain isolated from plants inhabiting geothermal soils with a non-geothermal isolate. Thermal IR source images of hyphae have been acquired with a 64 ?? 64 element focal plane array detector; single point IR spectra have been obtained with synchrotron source light. In some C. protuberata hyphae, we have discovered the spectral signature of crystalline mannitol, a fungal polyol with complex protective roles. With FTIR-FPA imaging, we have determined that the protein content in cells remains fairly constant throughout the length of a hypha, whereas the mannitol is found at discrete, irregular locations. This is the first direct observation of mannitol in intact fungal hyphae. Since the concentration of mannitol in cells varies with respect to position and is not present in all hyphae, this discovery may be related to habitat adaptation, fungal structure and growth stages. ?? 2010 The Royal Society of Chemistry.

  4. Arbuscular mycorrhizal fungal hyphae contribute to the uptake of polycyclic aromatic hydrocarbons by plant roots.

    PubMed

    Gao, Yanzheng; Cheng, Zhaoxia; Ling, Wanting; Huang, Jing

    2010-09-01

    The arbuscular mycorrhizal (AM) hyphae-mediated uptake of polycyclic aromatic hydrocarbons (PAHs) by the roots of ryegrass (Lolium multiflorum Lam.) was investigated using three-compartment systems. Glomus mosseae and Glomus etunicatum were chosen, and fluorene and phenanthrene were used as representative PAHs. When roots were grown in un-spiked soils, AM hyphae extended into PAH-spiked soil and clearly absorbed and transported PAHs to roots, resulting in high concentrations of fluorene and phenanthrene in roots. This was further confirmed by the batch equilibration experiment, which revealed that the partition coefficients (K(d)) of tested PAHs by mycorrhizal hyphae were 270-356% greater than those by roots, suggesting the great potential of hyphae to absorb PAHs. Because of fluorene's lower molecular weight and higher water solubility, its translocation by hyphae was greater than that of phenanthrene. These results provide new perspectives on the AM hyphae-mediated uptake by plants of organic contaminants from soil. PMID:20403686

  5. Two Cdc2 Kinase Genes with Distinct Functions in Vegetative and Infectious Hyphae in Fusarium graminearum.

    PubMed

    Liu, Huiquan; Zhang, Shijie; Ma, Jiwen; Dai, Yafeng; Li, Chaohui; Lyu, Xueliang; Wang, Chenfang; Xu, Jin-Rong

    2015-06-01

    Eukaryotic cell cycle involves a number of protein kinases important for the onset and progression through mitosis, most of which are well characterized in the budding and fission yeasts and conserved in other fungi. However, unlike the model yeast and filamentous fungi that have a single Cdc2 essential for cell cycle progression, the wheat scab fungus Fusarium graminearum contains two CDC2 orthologs. The cdc2A and cdc2B mutants had no obvious defects in growth rate and conidiation but deletion of both of them is lethal, indicating that these two CDC2 orthologs have redundant functions during vegetative growth and asexual reproduction. However, whereas the cdc2B mutant was normal, the cdc2A mutant was significantly reduced in virulence and rarely produced ascospores. Although deletion of CDC2A had no obvious effect on the formation of penetration branches or hyphopodia, the cdc2A mutant was limited in the differentiation and growth of infectious growth in wheat tissues. Therefore, CDC2A plays stage-specific roles in cell cycle regulation during infectious growth and sexual reproduction. Both CDC2A and CDC2B are constitutively expressed but only CDC2A was up-regulated during plant infection and ascosporogenesis. Localization of Cdc2A- GFP to the nucleus but not Cdc2B-GFP was observed in vegetative hyphae, ascospores, and infectious hyphae. Complementation assays with chimeric fusion constructs showed that both the N- and C-terminal regions of Cdc2A are important for its functions in pathogenesis and ascosporogenesis but only the N-terminal region is important for its subcellular localization. Among the Sordariomycetes, only three Fusarium species closely related to F. graminearum have two CDC2 genes. Furthermore, F. graminearum uniquely has two Aurora kinase genes and one additional putative cyclin gene, and its orthologs of CAK1 and other four essential mitotic kinases in the budding yeast are dispensable for viability. Overall, our data indicate that cell cycle

  6. Two Cdc2 Kinase Genes with Distinct Functions in Vegetative and Infectious Hyphae in Fusarium graminearum

    PubMed Central

    Liu, Huiquan; Zhang, Shijie; Ma, Jiwen; Dai, Yafeng; Li, Chaohui; Lyu, Xueliang; Wang, Chenfang; Xu, Jin-Rong

    2015-01-01

    Eukaryotic cell cycle involves a number of protein kinases important for the onset and progression through mitosis, most of which are well characterized in the budding and fission yeasts and conserved in other fungi. However, unlike the model yeast and filamentous fungi that have a single Cdc2 essential for cell cycle progression, the wheat scab fungus Fusarium graminearum contains two CDC2 orthologs. The cdc2A and cdc2B mutants had no obvious defects in growth rate and conidiation but deletion of both of them is lethal, indicating that these two CDC2 orthologs have redundant functions during vegetative growth and asexual reproduction. However, whereas the cdc2B mutant was normal, the cdc2A mutant was significantly reduced in virulence and rarely produced ascospores. Although deletion of CDC2A had no obvious effect on the formation of penetration branches or hyphopodia, the cdc2A mutant was limited in the differentiation and growth of infectious growth in wheat tissues. Therefore, CDC2A plays stage-specific roles in cell cycle regulation during infectious growth and sexual reproduction. Both CDC2A and CDC2B are constitutively expressed but only CDC2A was up-regulated during plant infection and ascosporogenesis. Localization of Cdc2A- GFP to the nucleus but not Cdc2B-GFP was observed in vegetative hyphae, ascospores, and infectious hyphae. Complementation assays with chimeric fusion constructs showed that both the N- and C-terminal regions of Cdc2A are important for its functions in pathogenesis and ascosporogenesis but only the N-terminal region is important for its subcellular localization. Among the Sordariomycetes, only three Fusarium species closely related to F. graminearum have two CDC2 genes. Furthermore, F. graminearum uniquely has two Aurora kinase genes and one additional putative cyclin gene, and its orthologs of CAK1 and other four essential mitotic kinases in the budding yeast are dispensable for viability. Overall, our data indicate that cell cycle

  7. Monitoring the Metabolic State of Fungal Hyphae and the Presence of Melanin by Nonlinear Spectral Imaging

    PubMed Central

    Knaus, Helene; Blab, Gerhard A.; Agronskaia, Alexandra V.; van den Heuvel, Dave J.; Gerritsen, Hans C.

    2013-01-01

    Label-free nonlinear spectral imaging microscopy (NLSM) records two-photon-excited fluorescence emission spectra of endogenous fluorophores within the specimen. Here, NLSM is introduced as a novel, minimally invasive method to analyze the metabolic state of fungal hyphae by monitoring the autofluorescence of NAD(P)H and flavin adenine dinucleotide (FAD). Moreover, the presence of melanin was analyzed by NLSM. NAD(P)H, FAD, and melanin were used as biomarkers for freshness of mushrooms of Agaricus bisporus (white button mushroom) that had been stored at 4°C for 0 to 17 days. During this period, the mushrooms did not show changes in morphology or color detectable by eye. In contrast, FAD/NAD(P)H and melanin/NAD(P)H ratios increased over time. For instance, these ratios increased from 0.92 to 2.02 and from 0.76 to 1.53, respectively, at the surface of mushroom caps that had been harvested by cutting the stem. These ratios were lower under the skin than at the surface of fresh mushrooms (0.78 versus 0.92 and 0.41 versus 0.76, respectively), indicative of higher metabolism and lower pigment formation within the fruiting body. Signals were different not only between tissues of the mushroom but also between neighboring hyphae. These data show that NLSM can be used to determine the freshness of mushrooms and to monitor the postharvest browning process at an early stage. Moreover, these data demonstrate the potential of NLSM to address a broad range of fundamental and applied microbiological processes. PMID:23934488

  8. High-resolution mycorrhizal hyphae dynamics: temporal variation, biophysical controls, and global environmental change

    NASA Astrophysics Data System (ADS)

    Hernandez, R. R.; Allen, M. F.

    2010-12-01

    Soils are the largest terrestrial carbon (C) repository in the global C cycle, storing 4.5 times more C than aboveground vegetation. Mycorrhizal fungi are critical edaphic organisms that influence soil C dynamics at both microscopic and ecosystem scales. Understanding the production and turnover of these organisms is critical for accurate ecosystem C budgets and predictive models incorporating changes in climate. This study seeks to quantify high-resolution mycorrhizal hyphae dynamics at various temporal scales in a mixed conifer forest (UC James Reserve, CA) using novel technologies including automated minirhizotrons, embedded soil sensor networks, and environmental software (i.e., Rootfly). We found that hyphae elongation and dieback rates in May 2009 varied significantly across 6-h diel time intervals and were greatest between 12:00 pm and 6:00 pm, when soil temperature and modeled CO2 flux is maximum. Seasonal dynamics revealed peak hyphae biomass in mid-April and rapid hyphae length decline from mid-April through June. Seasonal hyphae dynamism is tightly coupled with biophysical controls, namely, soil water content, which is positively related to hyphae production, and soil temperature. Interestingly, 14 °C may be a threshold for hyphae growth in this system as soil temperatures exceeding this value are coupled with rapid hyphae mortality. This study suggests that human-mediated changes to biophysical controls may modulate seasonal hyphae growth regimes, possibly reducing growth season duration or initiating early mortality. In this scenario, mycorrhizal hyphae mortality may act as a positive feedback to increasing CO2 levels, by releasing large amounts of CO2 into the atmosphere.

  9. Bypassing both surface attachment and surface recognition requirements for appressorium formation by overactive ras signaling in Magnaporthe oryzae.

    PubMed

    Zhou, Xiaoying; Zhao, Xinhua; Xue, Chaoyang; Dai, Yafeng; Xu, Jin-Rong

    2014-09-01

    Magnaporthe oryzae forms a highly specialized infection structure called an appressorium for plant penetration. In M. oryzae and many other plant-pathogenic fungi, surface attachment and surface recognition are two essential requirements for appressorium formation. Development of appressoria in the air has not been reported. In this study, we found that expression of a dominant active MoRAS2(G18V) allele in M. oryzae resulted in the formation of morphologically abnormal appressoria on nonconducive surfaces, in liquid suspensions, and on aerial hyphae without attachment to hard surfaces. Both the Pmk1 mitogen-activated protein kinase cascade and cAMP signaling pathways that regulate surface recognition and appressorium morphogenesis in M. oryzae were overactivated in the MoRAS2(G18V) transformant. In mutants deleted of PMK1 or CPKA, expression of MoRAS2(G18V) had no significant effects on appressorium morphogenesis. Furthermore, expression of dominant MoRAS2 in Colletotrichum graminicola and C. gloeosporioides also caused the formation of appressorium-like structures in aerial hyphae. Overall, our data indicate that MoRas2 functions upstream from both the cAMP-PKA and Pmk1 pathways and overactive Ras signaling leads to improper activation of these two pathways and appressorium formation without surface attachment in appressorium-forming pathogens. PMID:24835254

  10. Quantification of Fungal Hyphae in Leaves of Deciduous Trees by Automated Image Analysis

    PubMed Central

    Daniel, O.; Schonholzer, F.; Zeyer, J.

    1995-01-01

    An optical method to quantify the fungal hyphae within decomposing leaves of deciduous trees was developed. The plant matrix was partially destroyed under hydrolytic conditions, and fungal hyphae and cellulose residues within the leaves were stained with Calcofluor M2R. Cellulose residues were subsequently depolymerized by cellulase, and fungal hyphae were separated from the remaining plant matrix with a pressurized air-water mixture. An image analysis program to quantify the fungal hyphae was written. The program included the recognition of fungal hyphae, the elimination of stomata from the images, and the measuring of lengths of fungal hyphae. The optical method was verified by a chemical method relying on glucosamine as an indicator of fungal biomass. The fungal biomass in leaves of Fagus silvatica and Quercus petraea at early states of decomposition was 0.2 to 0.4% of the leaf weight. The biomass reached a maximum within 2 to 4 weeks (optical method, 0.5 to 0.7%; chemical method, 1 to 1.4% of the initial leaf weight) and decreased thereafter. PMID:16535160

  11. Mycorrhizal hyphae as ecological niche for highly specialized hypersymbionts – or just soil free-riders?

    PubMed Central

    Jansa, Jan; Bukovská, Petra; Gryndler, Milan

    2013-01-01

    Mycorrhizal fungi interconnect two different kinds of environments, namely the plant roots with the surrounding soil. This widespread coexistence of plants and fungi has important consequences for plant mineral nutrition, water acquisition, carbon allocation, tolerance to abiotic and biotic stresses and interplant competition. Yet some current research indicates a number of important roles to be played by hyphae-associated microbes, in addition to the hyphae themselves, in foraging for and acquisition of soil resources and in transformation of organic carbon in the soil-plant systems. We critically review the available scientific evidence for the theory that the surface of mycorrhizal hyphae in soil is colonized by highly specialized microbial communities, and that these fulfill important functions in the ecology of mycorrhizal fungal hyphae such as accessing recalcitrant forms of mineral nutrients, and production of signaling and other compounds in the vicinity of the hyphae. The validity of another hypothesis will then be addressed, namely that the specific associative microbes are rewarded with exclusive access to fungal carbon, which would qualify them as hypersymbionts (i.e., symbionts of symbiotic mycorrhizal fungi). Thereafter, we ask whether recruitment of functionally different microbial assemblages by the hyphae is required under different soil conditions (questioning what evidence is available for such an effect), and we identify knowledge gaps requiring further attention. PMID:23720665

  12. Metabolic Response of Candida albicans to Phenylethyl Alcohol under Hyphae-Inducing Conditions

    PubMed Central

    Han, Ting-Li; Tumanov, Sergey; Cannon, Richard D.; Villas-Boas, Silas G.

    2013-01-01

    Phenylethyl alcohol was one of the first quorum sensing molecules (QSMs) identified in C. albicans. This extracellular signalling molecule inhibits the hyphal formation of C. albicans at high cell density. Little is known, however, about the underlying mechanisms by which this QSM regulates the morphological switches of C. albicans. Therefore, we have applied metabolomics and isotope labelling experiments to investigate the metabolic changes that occur in C. albicans in response to phenylethyl alcohol under defined hyphae-inducing conditions. Our results showed a global upregulation of central carbon metabolism when hyphal development was suppressed by phenylethyl alcohol. By comparing the metabolic changes in response to phenylethyl alcohol to our previous metabolomic studies, we were able to short-list 7 metabolic pathways from central carbon metabolism that appear to be associated with C. albicans morphogenesis. Furthermore, isotope-labelling data showed that phenylethyl alcohol is indeed taken up and catabolised by yeast cells. Isotope-labelled carbon atoms were found in the majority of amino acids as well as in lactate and glyoxylate. However, isotope-labelled carbon atoms from phenylethyl alcohol accumulated mainly in the pyridine ring of NAD+/NADH and NADP−/NADPH molecules, showing that these nucleotides were the main products of phenylethyl alcohol catabolism. Interestingly, two metabolic pathways where these nucleotides play an important role, nitrogen metabolism and nicotinate/nicotinamide metabolism, were also short-listed through our previous metabolomics works as metabolic pathways likely to be closely associated with C. albicans morphogenesis. PMID:23951145

  13. Using enlarged stereo aerial images acquired by small-format nonmetric camera for large-scale ocean floor mapping at low tide

    NASA Astrophysics Data System (ADS)

    Adamos, Christos; Faig, Wolfgang

    1993-10-01

    HY-GRO '92 is a project currently carried out by the Ocean Mapping Group at the University of New Brunswick. One of the purposes of this project is the investigation of the relationship between acoustic mapping data and the actual ocean seabed bathymetry. In order to facilitate the comparison, ground truthing information (Digital Elevation Model) has been collected using stereo aerial photography of tidal areas at low tide. The required DEM accuracy is in the magnitude of a few centimeters. A reasonable photoscale for providing the required DEM accuracy would be 1:3750. With a focal length of 80 mm the flying height has to be 300 m. In that case the ground coverage of the 57 X 57 mm2 image format is 214 X 214 m2. It is clear that for large areas of interest (in our case: 2.5 X 2.5 km2) while maintaining the necessary overlap (60%) and sidelap (30%), the number of photographs and control points becomes unreasonably high, thus making the use of the small format camera not attractive anymore. The above encountered problem was solved with the acquisition of the original images in a four times smaller scale (1:15,000, flying height 1200 m, ground coverage 857 X 857 m2). Using a quality enlarger, the original images are enlarged by the same factor, so that the final image product is at the desired scale. The enlargement introduces effects of lens distortions and film deformations but they are again taken care of by the self calibrating bundle adjustment.

  14. Survival of Phytophthora ramorum hyphae following exposure to temperature extremes and various humidities

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We examined the impact of short-term exposure to high and low temperatures and a range of relative humidities on survival of Phytophthora ramorum hyphae. Spore-free hyphal colonies were grown on dialysis squares atop V8 medium. Relative humidity ranged from 41 – 93% at 20 C and 43 – 86% at 28 C. ...

  15. Verification of Potency of Aerial Digital Oblique Cameras for Aerial Photogrammetry in Japan

    NASA Astrophysics Data System (ADS)

    Nakada, Ryuji; Takigawa, Masanori; Ohga, Tomowo; Fujii, Noritsuna

    2016-06-01

    Digital oblique aerial camera (hereinafter called "oblique cameras") is an assembly of medium format digital cameras capable of shooting digital aerial photographs in five directions i.e. nadir view and oblique views (forward and backward, left and right views) simultaneously and it is used for shooting digital aerial photographs efficiently for generating 3D models in a wide area. For aerial photogrammetry of public survey in Japan, it is required to use large format cameras, like DMC and UltraCam series, to ensure aerial photogrammetric accuracy. Although oblique cameras are intended to generate 3D models, digital aerial photographs in 5 directions taken with them should not be limited to 3D model production but they may also be allowed for digital mapping and photomaps of required public survey accuracy in Japan. In order to verify the potency of using oblique cameras for aerial photogrammetry (simultaneous adjustment, digital mapping and photomaps), (1) a viewer was developed to interpret digital aerial photographs taken with oblique cameras, (2) digital aerial photographs were shot with an oblique camera owned by us, a Penta DigiCAM of IGI mbH, and (3) accuracy of 3D measurements was verified.

  16. Damage to Candida albicans Hyphae and Pseudohyphae by the Myeloperoxidase System and Oxidative Products of Neutrophil Metabolism In Vitro

    PubMed Central

    Diamond, Richard D.; Clark, Robert A.; Haudenschild, Christian C.

    1980-01-01

    In previous studies, we noted that Candida hyphae and pseudohyphae could be damaged and probably killed by neutrophils, primarily by oxygen-dependent nonphagocytic mechanisms. In extending these studies, amount of damage to hyphae again was measured by inhibition of [14C]cytosine uptake. Neutrophils from only one of four patients with chronic granulomatous disease damaged hyphae at all, and neutrophils from this single patient damaged hyphae far less efficiently than simultaneously tested neutrophils from normal control subjects. Neutrophils from neither of two subjects with hereditary myeloperoxidase deficiency damaged the hyphae. This confirmed the importance of oxidative mechanisms in general and myeloperoxidase-mediated systems in particular in damaging Candida hyphae. Several potentially fungicidal oxidative intermediates are produced by metabolic pathways of normal neutrophils, but their relative toxicity for Candida hyphae was previously unknown. To help determine this, cell-free in vitro systems were used to generate these potentially microbicidal products. Myeloperoxidase with hydrogen peroxide, iodide, and chloride resulted in 91.2% damage to hyphal inocula in 11 experiments. There was less damage when either chloride or iodide was omitted, and no damage when myeloperoxidase was omitted or inactivated by heating. Azide, cyanide, and catalase (but not heated catalase) inhibited the damage. Systems for generation of hydrogen peroxide could replace reagent hydrogen peroxide in the myeloperoxidase system. These included glucose oxidase, in the presence of glucose, and xanthine oxidase, in the presence of either hypoxanthine or acetaldehyde. In the presence of myeloperoxidase and a halide, the toxicity of the xanthine oxidase system was not inhibited by superoxide dismutase and, under some conditions, was marginally increased by this enzyme. This suggested that superoxide radical did not damage hyphae directly but served primarily as an intermediate in the

  17. Attenuation of PAMP-triggered immunity in maize requires down-regulation of the key β-1,6-glucan synthesis genes KRE5 and KRE6 in biotrophic hyphae of Colletotrichum graminicola.

    PubMed

    Oliveira-Garcia, Ely; Deising, Holger B

    2016-08-01

    In plants, pathogen defense is initiated by recognition of pathogen-associated molecular patterns (PAMPs) via plasma membrane-localized pattern-recognition receptors (PRRs). Fungal structural cell wall polymers such as branched β-glucans are essential for infection structure rigidity and pathogenicity, but at the same time represent PAMPs. Kre5 and Kre6 are key enzymes in β-1,6-glucan synthesis and formation of branch points of the β-glucan network. In spite of the importance of branched β-glucan for hyphal rigidity and plant-fungus interactions, neither the role of KRE5 and KRE6 in pathogenesis nor mechanisms allowing circumventing branched β-glucan-triggered immune responses are known. We functionally characterized KRE5 and KRE6 of the ascomycete Colletotrichum graminicola, a hemibiotroph that infects maize (Zea mays). After appressorial plant invasion, this fungus sequentially differentiates biotrophic and highly destructive necrotrophic hyphae. RNAi-mediated reduction of KRE5 and KRE6 transcript abundance caused appressoria to burst and swelling of necrotrophic hyphae, indicating that β-1,6-glucosidic bonds are essential in these cells. Live cell imaging employing KRE5:mCherry and KRE6:mCherry knock-in strains and probing of infection structures with a YFP-conjugated β-1,6-glucan-binding protein showed expression of these genes and exposure of β-1,6-glucan in conidia, appressoria and necrotrophic, but not in biotrophic hyphae. Overexpression of KRE5 and KRE6 in biotrophic hyphae led to activation of broad-spectrum plant defense responses, including papilla and H2 O2 formation, as well as transcriptional activation of several defense-related genes. Collectively, our results strongly suggest that down-regulation of synthesis and avoidance of exposure of branched β-1,3-β-1,6-glucan in biotrophic hyphae is required for attenuation of plant immune responses. PMID:27144995

  18. Multi-temporal monitoring of crack formation on a mountain col with low-cost unmanned aerial systems - a case study in Austria

    NASA Astrophysics Data System (ADS)

    Stary, Ulrike; Adams, Marc

    2016-04-01

    In the Tuxer Alps of Western Austria, crack formation was observed on a col at approximately 2,500 m a.s.l., in close proximity to a highly frequented hiking trail. On an area of 0.2 ha, three several meter deep cracks were identified. Here we present the results of a 3-year monitoring of this area with low-cost, unmanned aerial systems (UAS) and photogrammetric techniques. In 2013 and 2014, a custom-built fixed-wing UAS (Multiplex Mentor, wingspan 1.6 m, gross take-off weight 2.5 kg), equipped with a Sony NEX5 (16 mm prime lens, 14 MP sensor resolution) was used to map the study site. In 2015 we employed a helicopter (Thundertiger Raptor, 0.55 m blade length, gross take-off weight 2.8 kg), fitted with a GoPro2 (60° prime lens, 5 MP sensor resolution). In all three cases we recorded 1,200-2,000 images in 10-30 minutes. To georeference the images, 8-10 ground control points (GCP) were placed at the study site and measured with a Trimble GeoXT GPS device (expected accuracy 0.15 m, precision 0.3 m). Using AgiSoft's PhotoScan (v.1.1.6), Orthophotos (OP) and digital surface models (DSM) were calculated with 5 and 20 cm ground sampling distance, respectively. The visual interpretation of the OPs gave some indication, that the size of the cracks was increasing by 0.1-0.5 m (A-axis) or 0.2-0.8 m² per year. An interpretation of the DSMs was inconclusive with regard to the depth of the cracks due to shadows in the imagery and vertical or overhanging sidewalls of the cracks. Additionally the accuracy of the GCP-measurements was found to lie below the rate of change of the cracks, thus not permitting a direct calculation of difference DSM. From an operational point-of-view, the study site proved very challenging because of its exposed, high-alpine location, with high wind speeds, gusts and poor visibility hampering the UAS-missions. The monitoring campaign will continue in 2016, where the collection of additional ground-based reference data is planned (e.g. terrestrial

  19. Aerial radiation surveys

    SciTech Connect

    Jobst, J.

    1980-01-01

    A recent aerial radiation survey of the surroundings of the Vitro mill in Salt Lake City shows that uranium mill tailings have been removed to many locations outside their original boundary. To date, 52 remote sites have been discovered within a 100 square kilometer aerial survey perimeter surrounding the mill; 9 of these were discovered with the recent aerial survey map. Five additional sites, also discovered by aerial survey, contained uranium ore, milling equipment, or radioactive slag. Because of the success of this survey, plans are being made to extend the aerial survey program to other parts of the Salt Lake valley where diversions of Vitro tailings are also known to exist.

  20. Schizosaccharomyces japonicus: the fission yeast is a fusion of yeast and hyphae.

    PubMed

    Niki, Hironori

    2014-03-01

    The clade of Schizosaccharomyces includes 4 species: S. pombe, S. octosporus, S. cryophilus, and S. japonicus. Although all 4 species exhibit unicellular growth with a binary fission mode of cell division, S. japonicus alone is dimorphic yeast, which can transit from unicellular yeast to long filamentous hyphae. Recently it was found that the hyphal cells response to light and then synchronously activate cytokinesis of hyphae. In addition to hyphal growth, S. japonicas has many properties that aren't shared with other fission yeast. Mitosis of S. japonicas is referred to as semi-open mitosis because dynamics of nuclear membrane is an intermediate mode between open mitosis and closed mitosis. Novel genetic tools and the whole genomic sequencing of S. japonicas now provide us with an opportunity for revealing unique characters of the dimorphic yeast. PMID:24375690

  1. Arbuscular Mycorrhizal Fungal Hyphae Alter Soil Bacterial Community and Enhance Polychlorinated Biphenyls Dissipation.

    PubMed

    Qin, Hua; Brookes, Philip C; Xu, Jianming

    2016-01-01

    We investigated the role of arbuscular mycorrhizal fungal (AMF) hyphae in alternation of soil microbial community and Aroclor 1242 dissipation. A two-compartment rhizobox system with double nylon meshes in the central was employed to exclude the influence of Cucurbita pepo L. root exudates on hyphal compartment soil. To assess the quantitative effect of AMF hyphae on soil microbial community, we separated the hyphal compartment soil into four horizontal layers from the central mesh to outer wall (e.g., L1-L4). Soil total PCBs dissipation rates ranged from 35.67% of L4 layer to 57.39% of L1 layer in AMF inoculated treatment, which were significant higher than the 17.31% of the control (P < 0.05). The dissipation rates of tri-, tetrachlorinated biphenyls as well as the total PCBs were significantly correlated with soil hyphal length (P < 0.01). Real-time quantitative PCR results indicated that the Rhodococcus-like bphC gene was 2-3 orders of magnitude more than that of Pseudomonas-like bphC gene, and was found responded positively to AMF. Phylogenetic analyses of the 16S rDNA sequenced by the Illumina Miseq sequencing platform indicated that AMF hyphae altered bacterial community compositions. The phylum Betaproteobacteria and Actinobacteria were dominated in the soil, while Burkholderiales and Actinomycetales were dominated at the order level. Taxa from the Comamonadaceae responded positively to AMF and trichlorinated biphenyl dissipation, while taxa from the Oxalobacteraceae and Streptomycetaceae responded negatively to AMF and PCB congener dissipation. Our results suggested that the AMF hyphal exudates as well as the hyphae per se did have quantitative effects on shaping soil microbial community, and could modify the PCBs dissipation processes consequently. PMID:27379068

  2. Arbuscular Mycorrhizal Fungal Hyphae Alter Soil Bacterial Community and Enhance Polychlorinated Biphenyls Dissipation

    PubMed Central

    Qin, Hua; Brookes, Philip C.; Xu, Jianming

    2016-01-01

    We investigated the role of arbuscular mycorrhizal fungal (AMF) hyphae in alternation of soil microbial community and Aroclor 1242 dissipation. A two-compartment rhizobox system with double nylon meshes in the central was employed to exclude the influence of Cucurbita pepo L. root exudates on hyphal compartment soil. To assess the quantitative effect of AMF hyphae on soil microbial community, we separated the hyphal compartment soil into four horizontal layers from the central mesh to outer wall (e.g., L1–L4). Soil total PCBs dissipation rates ranged from 35.67% of L4 layer to 57.39% of L1 layer in AMF inoculated treatment, which were significant higher than the 17.31% of the control (P < 0.05). The dissipation rates of tri-, tetrachlorinated biphenyls as well as the total PCBs were significantly correlated with soil hyphal length (P < 0.01). Real-time quantitative PCR results indicated that the Rhodococcus-like bphC gene was 2–3 orders of magnitude more than that of Pseudomonas-like bphC gene, and was found responded positively to AMF. Phylogenetic analyses of the 16S rDNA sequenced by the Illumina Miseq sequencing platform indicated that AMF hyphae altered bacterial community compositions. The phylum Betaproteobacteria and Actinobacteria were dominated in the soil, while Burkholderiales and Actinomycetales were dominated at the order level. Taxa from the Comamonadaceae responded positively to AMF and trichlorinated biphenyl dissipation, while taxa from the Oxalobacteraceae and Streptomycetaceae responded negatively to AMF and PCB congener dissipation. Our results suggested that the AMF hyphal exudates as well as the hyphae per se did have quantitative effects on shaping soil microbial community, and could modify the PCBs dissipation processes consequently. PMID:27379068

  3. Switching from a Unicellular to Multicellular Organization in an Aspergillus niger Hypha

    PubMed Central

    Bleichrodt, Robert-Jan; Hulsman, Marc

    2015-01-01

    ABSTRACT Pores in fungal septa enable cytoplasmic streaming between hyphae and their compartments. Consequently, the mycelium can be considered unicellular. However, we show here that Woronin bodies close ~50% of the three most apical septa of growing hyphae of Aspergillus niger. The incidence of closure of the 9th and 10th septa was even ≥94%. Intercompartmental streaming of photoactivatable green fluorescent protein (PA-GFP) was not observed when the septa were closed, but open septa acted as a barrier, reducing the mobility rate of PA-GFP ~500 times. This mobility rate decreased with increasing septal age and under stress conditions, likely reflecting a regulatory mechanism affecting septal pore diameter. Modeling revealed that such regulation offers effective control of compound concentration between compartments. Modeling also showed that the incidence of septal closure in A. niger had an even stronger impact on cytoplasmic continuity. Cytoplasm of hyphal compartments was shown not to be in physical contact when separated by more than 4 septa. Together, data show that apical compartments of growing hyphae behave unicellularly, while older compartments have a multicellular organization. PMID:25736883

  4. Nuclear division cycle in Neurospora crassa hyphae under different growth conditions.

    PubMed Central

    Martegani, E; Levi, M; Trezzi, F; Alberghina, L

    1980-01-01

    Treatment with picolinic acid blocked Neurospora crassa nuclei in G1, and recovery from the treatment allowed a synchronous wave of deoxyribonucleic acid synthesis to occur. Nuclei, which appeared as compact globular bodies during the period of blockage, assumed a ring shape during the following S phase, which was also maintained in the G2 phase. The proportion of compact globular nuclei was much higher in hyphae growing at lower rates, whereas that of ring nuclei increased when the hyphae were growing at higher rates. Horseshoe nuclei (probably mitotic nuclei) and double ring nuclei were also observed in growing hyphae, but their frequencies were low and fairly independent of the rate of growth. The length of the S phase of the Neurospora nuclear division cycle was determined to be about 30 min. From the frequencies of the phase-specific nuclear shapes, the durations of the G1 phase and the combined S plus G2 phases were calculated. The results showed that variations in the growth rates of the mycelia were mainly coupled with variations in the G1 phase of the nuclear division cycle. For mycelia growing in minimal sucrose, the lengths of all of the phases of the nuclear division cycle were estimated. Images PMID:6445357

  5. Efflux of hydraulically lifted water from mycorrhizal fungal hyphae during imposed drought

    PubMed Central

    Querejeta, José Ignacio; Allen, Michael F

    2008-01-01

    Apart from improving plant and soil water status during drought, it has been suggested that hydraulic lift (HL) could enhance plant nutrient capture through the flow of mineral nutrients directly from the soil to plant roots, or by maintaining the functioning of mycorrhizal fungi. We evaluated the extent to which the diel cycle of water availability created by HL covaries with the efflux of HL water from the tips of extramatrical (external) mycorrhizal hyphae, and the possible effects on biogeochemical processes. Phenotypic mycorrhizal fungal variables, such as total and live hyphal lengths, were positively correlated with HL efflux from hyphae, soil water potential (dawn), and plant response variables (foliar 15N). The efflux of HL water from hyphae was also correlated with bacterial abundance and soil enzyme activity (P), and the moistening of soil organic matter. Such findings indicate that the efflux of HL water from the external mycorrhizal mycelia may be a complementary explanation for plant nutrient acquisition and survival during drought. PMID:19704776

  6. Candida glabrata Binding to Candida albicans Hyphae Enables Its Development in Oropharyngeal Candidiasis

    PubMed Central

    Tati, Swetha; Davidow, Peter; McCall, Andrew; Hwang-Wong, Elizabeth; Rojas, Isolde G.; Cormack, Brendan; Edgerton, Mira

    2016-01-01

    Pathogenic mechanisms of Candida glabrata in oral candidiasis, especially because of its inability to form hyphae, are understudied. Since both Candida albicans and C. glabrata are frequently co-isolated in oropharyngeal candidiasis (OPC), we examined their co-adhesion in vitro and observed adhesion of C. glabrata only to C. albicans hyphae microscopically. Mice were infected sublingually with C. albicans or C. glabrata individually, or with both species concurrently, to study their ability to cause OPC. Infection with C. glabrata alone resulted in negligible infection of tongues; however, colonization by C. glabrata was increased by co-infection or a pre-established infection with C. albicans. Furthermore, C. glabrata required C. albicans for colonization of tongues, since decreasing C. albicans burden with fluconazole also reduced C. glabrata. C. albicans hyphal wall adhesins Als1 and Als3 were important for in vitro adhesion of C. glabrata and to establish OPC. C. glabrata cell wall protein coding genes EPA8, EPA19, AWP2, AWP7, and CAGL0F00181 were implicated in mediating adhesion to C. albicans hyphae and remarkably, their expression was induced by incubation with germinated C. albicans. Thus, we found a near essential requirement for the presence of C. albicans for both initial colonization and establishment of OPC infection by C. glabrata. PMID:27029023

  7. Do fungivores trigger the transfer of protective metabolites from host plants to arbuscular mycorrhizal hyphae?

    PubMed

    Duhamel, Marie; Pel, Roel; Ooms, Astra; Bücking, Heike; Jansa, Jan; Ellers, Jacintha; van Straalen, Nico M; Wouda, Tjalf; Vandenkoornhuyse, Philippe; Kiers, E Toby

    2013-09-01

    A key objective in ecology is to understand how cooperative strategies evolve and are maintained in species networks. Here, we focus on the tri-trophic relationship between arbuscular mycorrhizal (AM) fungi, host plants, and fungivores to ask if host plants are able to protect their mutualistic mycorrhizal partners from being grazed. Specifically, we test whether secondary metabolites are transferred from hosts to fungal partners to increase their defense against fungivores. We grew Plantago lanceolata hosts with and without mycorrhizal inoculum, and in the presence or absence of fungivorous springtails. We then measured fungivore effects on host biomass and mycorrhizal abundance (using quantitative PCR) in roots and soil. We used high-performance liquid chromatography to measure host metabolites in roots, shoots, and hyphae, focusing on catalpol, aucubin, and verbascoside. Our most striking result was that the metabolite catalpol was consistently found in AM fungal hyphae in host plants exposed to fungivores. When fungivores were absent, catalpol was undetectable in hyphae. Our results highlight the potential for plant-mediated protection of the mycorrhizal hyphal network. PMID:24279273

  8. Candida albicans Hypha Formation and Mannan Masking of β-Glucan Inhibit Macrophage Phagosome Maturation

    PubMed Central

    Louw, Johanna; Lewis, Leanne E.; Okai, Blessing; Walls, Catriona A.; Ballou, Elizabeth R.; Walker, Louise A.; Reid, Delyth; Munro, Carol A.; Brown, Alistair J. P.; Brown, Gordon D.; Gow, Neil A. R.; Erwig, Lars P.

    2014-01-01

    ABSTRACT Candida albicans is a major life-threatening human fungal pathogen in the immunocompromised host. Host defense against systemic Candida infection relies heavily on the capacity of professional phagocytes of the innate immune system to ingest and destroy fungal cells. A number of pathogens, including C. albicans, have evolved mechanisms that attenuate the efficiency of phagosome-mediated inactivation, promoting their survival and replication within the host. Here we visualize host-pathogen interactions using live-cell imaging and show that viable, but not heat- or UV-killed C. albicans cells profoundly delay phagosome maturation in macrophage cell lines and primary macrophages. The ability of C. albicans to delay phagosome maturation is dependent on cell wall composition and fungal morphology. Loss of cell wall O-mannan is associated with enhanced acquisition of phagosome maturation markers, distinct changes in Rab GTPase acquisition by the maturing phagosome, impaired hyphal growth within macrophage phagosomes, profound changes in macrophage actin dynamics, and ultimately a reduced ability of fungal cells to escape from macrophage phagosomes. The loss of cell wall O-mannan leads to exposure of β-glucan in the inner cell wall, facilitating recognition by Dectin-1, which is associated with enhanced phagosome maturation. PMID:25467440

  9. Aerial Image Systems

    NASA Astrophysics Data System (ADS)

    Clapp, Robert E.

    1987-09-01

    Aerial images produce the best stereoscopic images of the viewed world. Despite the fact that every optic in existence produces an aerial image, few persons are aware of their existence and possible uses. Constant reference to the eye and other optical systems have produced a psychosis of design that only considers "focal planes" in the design and analysis of optical systems. All objects in the field of view of the optical device are imaged by the device as an aerial image. Use of aerial images in vision and visual display systems can provide a true stereoscopic representation of the viewed world. This paper discusses aerial image systems - their applications and designs and presents designs and design concepts that utilize aerial images to obtain superior visual displays, particularly with application to visual simulation.

  10. Direct and indirect effects of glomalin, mycorrhizal hyphae, and roots on aggregate stability in rhizosphere of trifoliate orange.

    PubMed

    Wu, Qiang-Sheng; Cao, Ming-Qin; Zou, Ying-Ning; He, Xin-hua

    2014-01-01

    To test direct and indirect effects of glomalin, mycorrhizal hyphae, and roots on aggregate stability, perspex pots separated by 37-μm nylon mesh in the middle were used to form root-free hyphae and root/hyphae chambers, where trifoliate orange (Poncirus trifoliata) seedlings were colonized by Funneliformis mosseae or Paraglomus occultum in the root/hyphae chamber. Both fungal species induced significantly higher plant growth, root total length, easily-extractable glomalin-related soil protein (EE-GRSP) and total GRSP (T-GRSP), and mean weight diameter (an aggregate stability indicator). The Pearson correlation showed that root colonization or soil hyphal length significantly positively correlated with EE-GRSP, difficultly-extractable GRSP (DE-GRSP), T-GRSP, and water-stable aggregates in 2.00-4.00, 0.50-1.00, and 0.25-0.50 mm size fractions. The path analysis indicated that in the root/hyphae chamber, aggregate stability derived from a direct effect of root colonization, EE-GRSP or DE-GRSP. Meanwhile, the direct effect was stronger by EE-GRSP or DE-GRSP than by mycorrhizal colonization. In the root-free hyphae chamber, mycorrhizal-mediated aggregate stability was due to total effect but not direct effect of soil hyphal length, EE-GRSP and T-GRSP. Our results suggest that GRSP among these tested factors may be the primary contributor to aggregate stability in the citrus rhizosphere. PMID:25059396

  11. Fine-structural Correlates of Growth in Hyphae of Ascodesmis sphaerospora

    PubMed Central

    Brenner, Douglas M.; Carroll, George C.

    1968-01-01

    Mycelial mats of Ascodesmis sphaerospora were fixed and embedded for electron microscopy, and thin sections of 1-mm blocks, taken from the 1st to the 7th mm behind the hyphal tips, were cut parallel to the long axis of the hyphae. The hyphal tip region is characterized by an outer zone of electron-transparent vesicles, 500 to 1,000 A in diameter, and is apparently associated with wall elaboration. Immediately behind this region, dense granules become evident along convoluted membrane systems and along the plasma membrane; in the same region are numerous small lomasomes in the lateral wall. As the hypha grows, septa are laid down at 3- to 7-min intervals at a distance of 200 to 250 μ behind the hyphal tip. A cylinder of endoplasmic reticulum is intimately involved in cross-wall deposition from its earliest stages; as the wall grows in, it becomes increasingly constricted in the pore region, finally assuming a torus-like configuration. Woronin bodies are shown to have a crystalline substructure and to originate in pouch-like membrane systems. Cross-walls from a 7- to 13-hr-old mycelium frequently show highly ordered structures in the vicinity of the pore. These structures may appear either as laminar stacks of discs to one side of the pore or as series of stubby concentric rings within the pore area itself. In the latter case, a mass of granular material is frequently seen plugging the pore. Other unusual organelles and inclusions in 7- to 13-hr hyphae are vesicles containing swirls of beaded or dilated membrane, membrane-enclosed rods, and stacks of unit membranes associated with spherical, electron-transparent vesicles. Images PMID:4867750

  12. Tree-mycorrhiza symbiosis accelerate mineral weathering: Evidences from nanometer-scale elemental fluxes at the hypha-mineral interface

    NASA Astrophysics Data System (ADS)

    Bonneville, Steeve; Morgan, Daniel J.; Schmalenberger, Achim; Bray, Andrew; Brown, Andrew; Banwart, Steven A.; Benning, Liane G.

    2011-11-01

    In soils, mycorrhiza (microscopic fungal hypha) living in symbiosis with plant roots are the biological interface by which plants obtain, from rocks and organic matter, the nutrients necessary for their growth and maintenance. Despite their central role in soils, the mechanism and kinetics of mineral alteration by mycorrhiza are poorly constrained quantitatively. Here, we report in situ quantification of weathering rates from a mineral substrate, (0 0 1) basal plane of biotite, by a surface-bound hypha of Paxillus involutus, grown in association with the root system of a Scots pine, Pinus sylvestris. Four thin-sections were extracted by focused ion beam (FIB) milling along a single hypha grown over the biotite surface. Depth-profile of Si, O, K, Mg, Fe and Al concentrations were performed at the hypha-biotite interface by scanning transmission electron microscopy-energy dispersive X-ray spectroscopy (STEM-EDX). Large removals of K (50-65%), Mg (55-75%), Fe (80-85%) and Al (75-85%) were observed in the topmost 40 nm of biotite underneath the hypha while Si and O are preserved throughout the depth-profile. A quantitative model of alteration at the hypha-scale was developed based on solid-state diffusion fluxes of elements into the hypha and the break-down/mineralogical re-arrangement of biotite. A strong acidification was also observed with hypha bound to the biotite surface reaching pH < 4.6. When consistently compared with the abiotic biotite dissolution, we conclude that the surface-bound mycorrhiza accelerate the biotite alteration kinetics between pH 3.5 and 5.8 to ˜0.04 μmol biotite m -2 h -1. Our current work reaffirms that fungal mineral alteration is a process that combines our previously documented bio-mechanical forcing with the μm-scale acidification mediated by surface-bound hypha and a subsequent chemical element removal due to the fungal action. As such, our study presents a first kinetic framework for mycorrhizal alteration at the hypha-scale under

  13. Testing an Alternative Method for Estimating the Length of Fungal Hyphae Using Photomicrography and Image Processing

    PubMed Central

    Kirschbaum, Miko U. F.; Hedley, Mike J.; Camps Arbestain, Marta

    2016-01-01

    This study aimed to develop and test an unbiased and rapid methodology to estimate the length of external arbuscular mycorrhizal fungal (AMF) hyphae in soil. The traditional visual gridline intersection (VGI) method, which consists in a direct visual examination of the intersections of hyphae with gridlines on a microscope eyepiece after aqueous extraction, membrane-filtration, and staining (e.g., with trypan blue), was refined. For this, (i) images of the stained hyphae were taken by using a digital photomicrography technique to avoid the use of the microscope and the method was referred to as “digital gridline intersection” (DGI) method; and (ii), the images taken in (i) were processed and the hyphal length was measured by using ImageJ software, referred to as the “photomicrography–ImageJ processing” (PIP) method. The DGI and PIP methods were tested using known grade lengths of possum fur. Then they were applied to measure the hyphal lengths in soils with contrasting phosphorus (P) fertility status. Linear regressions were obtained between the known lengths (Lknown) of possum fur and the values determined by using either the DGI (LDGI) (LDGI = 0.37 + 0.97 × Lknown, r2 = 0.86) or PIP (LPIP) methods (LPIP = 0.33 + 1.01 × Lknown, r2 = 0.98). There were no significant (P > 0.05) differences between the LDGI and LPIP values. While both methods provided accurate estimation (slope of regression being 1.0), the PIP method was more precise, as reflected by a higher value of r2 and lower coefficients of variation. The average hyphal lengths (6.5–19.4 m g–1) obtained by the use of these methods were in the range of those typically reported in the literature (3–30 m g–1). Roots growing in P-deficient soil developed 2.5 times as many hyphae as roots growing in P-rich soil (17.4 vs 7.2 m g–1). These tests confirmed that the use of digital photomicrography in conjunction with either the grid–line intersection principle or image processing is a suitable

  14. Aerial photographic reproductions

    USGS Publications Warehouse

    U.S. Geological Survey

    1975-01-01

    The National Cartographic Information Center of the U.S. Geological Survey maintains records of aerial photographic coverage of the United States and its Territories, based on reports from other Federal agencies as well as State governmental agencies and commercial companies. From these records, the Center furnishes data to prospective purchasers on available photography and the agency holding the aerial film.

  15. Use of Bromodeoxyuridine Immunocapture To Identify Active Bacteria Associated with Arbuscular Mycorrhizal Hyphae

    PubMed Central

    Artursson, Veronica; Jansson, Janet K.

    2003-01-01

    Arbuscular mycorrhizae are beneficial for crops grown under low-till management systems. Increasingly, it is becoming apparent that bacteria associated with mycorrhizae can enhance the beneficial relationship between mycorrhizae and plants. However, it has been difficult to study these relationships by conventional techniques. In this study actively growing bacteria were identified in soil from an undisturbed fallow field known to contain arbuscular mycorrhizae by using molecular tools to eliminate the need for cultivation. A thymidine analog, bromodeoxyuridine (BrdU), was added to the soil and incubated for 2 days. DNA was extracted, and the newly synthesized DNA was isolated by immunocapture of the BrdU-containing DNA. The active bacteria in the community were identified by 16S rRNA gene PCR amplification and DNA sequence analysis. Based on 16S rRNA gene sequence information, a selective medium was chosen to isolate the corresponding active bacteria. Bacillus cereus strain VA1, one of the bacteria identified by the BrdU method, was isolated from the soil and tagged with green fluorescent protein. By using confocal microscopy, this bacterium was shown to clearly attach to arbuscular mycorrhizal hyphae. This study was the first to use this combination of molecular and traditional approaches to isolate, identify, and visualize a specific bacterium that is active in fallow soil and associates with arbuscular mycorrhizal hyphae. PMID:14532082

  16. Surface-bound phosphatase activity in living hyphae of ectomycorrhizal fungi of Nothofagus obliqua.

    PubMed

    Alvarez, Maricel; Godoy, Roberto; Heyser, Wolfgang; Härtel, Steffen

    2004-01-01

    We determined the location and the activity of surface-bound phosphomonoesterase (SBP) of five ectomycorrhizal (EM) fungi of Nothofagus oblique. EM fungal mycelium of Paxillus involutus, Austropaxillus boletinoides, Descolea antartica, Cenococcum geophilum and Pisolithus tinctorius was grown in media with varying concentrations of dissolved phosphorus. SBP activity was detected at different pH values (3-7) under each growth regimen. SBP activity was assessed using a colorimetric method based on the hydrolysis of p-nitrophenyl phosphate (pNPP) to p-nitrophenol phosphate (pNP) + P. A new technique involving confocal laser-scanning microscopy (LSM) was used to locate and quantify SBP activity on the hyphal surface. EM fungi showed two fundamentally different patterns of SBP activity in relation to varying environmental conditions (P-concentrations and pH). In the cases of D. antartica, A. boletinoides and C. geophilum, changes in SBP activity were induced primarily by changes in the number of SBP-active centers on the hyphae. In the cases of P. tinctorius and P. involutus, the number of SBP-active centers per μm hyphal length changed much less than the intensity of the SBP-active centers on the hyphae. Our findings not only contribute to the discussion about the role of SBP-active centers in EM fungi but also introduce LSM as a valuable method for studying EM fungi. PMID:21148871

  17. Distinct Innate Immune Phagocyte Responses to Aspergillus fumigatus Conidia and Hyphae in Zebrafish Larvae

    PubMed Central

    Knox, Benjamin P.; Deng, Qing; Rood, Mary; Eickhoff, Jens C.

    2014-01-01

    Aspergillus fumigatus is the most common filamentous fungal pathogen of immunocompromised hosts, resulting in invasive aspergillosis (IA) and high mortality rates. Innate immunity is known to be the predominant host defense against A. fumigatus; however, innate phagocyte responses to A. fumigatus in an intact host and their contributions to host survival remain unclear. Here, we describe a larval zebrafish A. fumigatus infection model amenable to real-time imaging of host-fungal interactions in live animals. Following infection with A. fumigatus, innate phagocyte populations exhibit clear preferences for different fungal morphologies: macrophages rapidly phagocytose conidia and form aggregates around hyphae, while the neutrophil response is dependent upon the presence of hyphae. Depletion of macrophages rendered host larvae susceptible to invasive disease. Moreover, a zebrafish model of human leukocyte adhesion deficiency with impaired neutrophil function also resulted in invasive disease and impaired host survival. In contrast, macrophage-deficient but not neutrophil-deficient larvae exhibited attenuated disease following challenge with a less virulent (ΔlaeA) strain of A. fumigatus, which has defects in secondary metabolite production. Taking these results together, we have established a new vertebrate model for studying innate immune responses to A. fumigatus that reveals distinct roles for neutrophils and macrophages in mediating host defense against IA. PMID:24879123

  18. Contact-induced apical asymmetry drives the thigmotropic responses of Candida albicans hyphae

    PubMed Central

    Thomson, Darren D; Wehmeier, Silvia; Byfield, FitzRoy J; Janmey, Paul A; Caballero-Lima, David; Crossley, Alison; Brand, Alexandra C

    2015-01-01

    Filamentous hyphae of the human pathogen, Candida albicans, invade mucosal layers and medical silicones. In vitro, hyphal tips reorient thigmotropically on contact with small obstacles. It is not known how surface topography is sensed but hyphae lacking the cortical marker, Rsr1/Bud1, are unresponsive. We show that, on surfaces, the morphology of hyphal tips and the position of internal polarity protein complexes are asymmetrically skewed towards the substratum and biased towards the softer of two surfaces. In nano-fabricated chambers, the Spitzenkörper (Spk) responded to touch by translocating across the apex towards the point of contact, where its stable maintenance correlated with contour-following growth. In the rsr1Δ mutant, the position of the Spk meandered and these responses were attenuated. Perpendicular collision caused lateral Spk oscillation within the tip until after establishment of a new growth axis, suggesting Spk position does not predict the direction of growth in C. albicans. Acute tip reorientation occurred only in cells where forward growth was countered by hyphal friction sufficient to generate a tip force of ∼ 8.7 μN (1.2 MPa), more than that required to penetrate host cell membranes. These findings suggest mechanisms through which the organization of hyphal tip growth in C. albicans facilitates the probing, penetration and invasion of host tissue. PMID:25262778

  19. Comparative daily dynamics of mycorrhizal fungal hyphae across differing ecosystems using an automated minirhizotron and sensor network

    NASA Astrophysics Data System (ADS)

    Allen, M. F.

    2013-05-01

    Fungal hyphae represent the second largest standing crop biomass in most terrestrial ecosystems. Mycorrhizal fungal hyphae are largely using newly-fixed carbon to explore the soil volume and provide nutrients and water to the host plant. Yet we know almost nothing about their dynamics in situ. We used a high-resolution (100x) automated minirhizotron to take daily images of mycorrhizal fungal hyphae in three distinct environments to describe fungal dynamics, a tropical rainforest (La Selva Biological Station, Costa Rica), a hot desert (Boyd Deep Canyon University of California NRS, USA), and a Mediterranean-climate mixed conifer forest (James San Jacinto University of California NRS, USA). 4400 images per tube per day were organized into mosaics, observed, and hyphal dynamics measured. All tube locations were also fitted with soil sensors for CO2, temperature (T), and soil moisture (SM), and atmospheric sensors for relative humidity, PAR, precipitation, and air temperature. At all sites, mycorrhizal fungal hyphae responded rapidly to precipitation and drying events. By observing individual hyphae, we found that both production and mortality peaked in association with these events. In the rain forest, soils were normally wet, restricting gas diffusion. Soil CO2 levels went as high as 50,000ppm. Hyphae continued to grow all year, but there was a peak in growth as soils dried, followed by mortality as the long dry period continued, as SM and soil CO2 declined but T increased. In the hot desert, soils were very dry except immediately following a large precipitation event. With precipitation, fine roots and hyphae start growing within a day. CO2 levels go up to 20,000ppm but then drop rapidly as CO2 diffuses out of the soil profile. Hyphal lengths remain high until they slowly die back. At the conifer forest, hyphae responded to precipitation and soil warming, but some persisted through the dry season and under snow. These observations tell us that newer technologies

  20. Survival of Phytophthora ramorum hyphae after exposure to temperature extremes and various humidities.

    PubMed

    Browning, Marsha; Englander, Larry; Tooley, Paul W; Berner, Dana

    2008-01-01

    We examined the effect of short-term exposure to high and low temperatures and a range of relative humidity (RH) on survival of Phytophthora ramorum hyphae. Spore-free hyphal colonies were grown on dialysis squares atop V8 medium. Colonies were transferred to water agar plates positioned at 27.5-50 C on a thermal gradient plate and incubated 2.5-480 min. For low temperature trials colonies were transferred to vials of distilled water and incubated in a water bath at -5 to -25 C for 1-24 h. In the relative humidity trials hyphal colonies were transferred to sealed humidity chambers containing various concentrations of glycerin for 1-8 h. Relative humidity was 41-93% at 20 C and 43-86% at 28 C. Survival in all trials was characterized by growth from dialysis squares into V8 medium. Temperatures of 37.5-40 C were lethal to P. ramorum hyphae within several hours, and temperatures of 42.5-50 C were lethal within minutes. Exposure to 32.5 and 35 C resulted in reduced survival over 8 h, while 30 C had no effect on three of four isolates. Hyphal colonies demonstrated considerable tolerance to cold, with all isolates surviving a 24 h exposure to -5 C. Survival diminished over time at lower temperatures, however a few colonies survived 24 h exposure to -25 C. Temperature also affected the ability of hyphal colonies to withstand reduced humidity. A RH of 41-43% was lethal in 2 h at 28 C compared to 8 h at 20 C. Three of four isolates were unaffected by an 8 h exposure to 81 and 95% RH at 20 C, and 73 and 86% RH at 28 C. Isolate differences were apparent in tolerance to freezing temperatures and reduced humidity. From these results it is apparent that the cold temperatures found in the northeastern USA are not likely to prevent the establishment of P. ramorum. There is also the potential for hyphae, and presumably spores, to survive periods of high humidity on the leaf surface in the absence of free water. PMID:18592898

  1. Staphylococcus aureus adherence to Candida albicans hyphae is mediated by the hyphal adhesin Als3p

    PubMed Central

    Peters, Brian M.; Ovchinnikova, Ekaterina S.; Krom, Bastiaan P.; Schlecht, Lisa Marie; Zhou, Han; Hoyer, Lois L.; Busscher, Henk J.; van der Mei, Henny C.; Jabra-Rizk, Mary Ann

    2012-01-01

    The bacterium Staphylococcus (St.) aureus and the opportunistic fungus Candida albicans are currently among the leading nosocomial pathogens, often co-infecting critically ill patients, with high morbidity and mortality. Previous investigations have demonstrated preferential adherence of St. aureus to C. albicans hyphae during mixed biofilm growth. In this study, we aimed to characterize the mechanism behind this observed interaction. C. albicans adhesin-deficient mutant strains were screened by microscopy to identify the specific receptor on C. albicans hyphae recognized by St. aureus. Furthermore, an immunoassay was developed to validate and quantify staphylococcal binding to fungal biofilms. The findings from these experiments implicated the C. albicans adhesin agglutinin-like sequence 3 (Als3p) in playing a major role in the adherence process. This association was quantitatively established using atomic force microscopy, in which the adhesion force between single cells of the two species was significantly reduced for a C. albicans mutant strain lacking als3. Confocal microscopy further confirmed these observations, as St. aureus overlaid with a purified recombinant Als3 N-terminal domain fragment (rAls3p) exhibited robust binding. Importantly, a strain of Saccharomyces cerevisiae heterologously expressing Als3p was utilized to further confirm this adhesin as a receptor for St. aureus. Although the parental strain does not bind bacteria, expression of Als3p on the cell surface conferred upon the yeast the ability to strongly bind St. aureus. To elucidate the implications of these in vitro findings in a clinically relevant setting, an ex vivo murine model of co-infection was designed using murine tongue explants. Fluorescent microscopic images revealed extensive hyphal penetration of the epithelium typical of C. albicans mucosal infection. Interestingly, St. aureus bacterial cells were only seen within the epithelial tissue when associated with the invasive

  2. Coupling Microbial Growth with Nanoparticles: A Universal Strategy To Produce Functional Fungal Hyphae Macrospheres.

    PubMed

    Zhu, Wen-Kun; Cong, Huai-Ping; Guan, Qing-Fang; Yao, Wei-Tang; Liang, Hai-Wei; Wang, Wei; Yu, Shu-Hong

    2016-05-25

    Macroscale assembly of nanoscale building blocks is an intriguing way to translate the unique characteristics of individual nanoparticles into macroscopic materials. However, the lack of the efficient universal assembly strategy seriously hinders the possibility of macroscale architectures in practical applications. Herein, we develop a general, environment-friendly, and scalable microbial growth method for the construction of macroscopic composite assemblies with excellent mechanical strength by in situ integrating various types of nanoparticles into fungal hyphae (FH) macrospheres. Notably, the size of the FH-based composite spheres and the loading amount of the nanoparticles with different dimensions can be well tuned by controlling the cultivation time and the dosage of nanoparticles, respectively. Interestingly, bifunctional FH-based core-shell macrospheres can also be achieved by programmed assembling two different kinds of nanoparticles in the cultivation process. The produced multifunctional FH-based composite spheres exhibit wide potential applications in magnetic actuation, photothermal therapy, and contaminant adsorption, etc. PMID:27148809

  3. Susceptibility screening of hyphae-forming fungi with a new, easy, and fast inoculum preparation method.

    PubMed

    Schmalreck, Arno; Willinger, Birgit; Czaika, Viktor; Fegeler, Wolfgang; Becker, Karsten; Blum, Gerhard; Lass-Flörl, Cornelia

    2012-12-01

    In vitro susceptibility testing of clinically important fungi becomes more and more essential due to the rising number of fungal infections in patients with impaired immune system. Existing standardized microbroth dilution methods for in vitro testing of molds (CLSI, EUCAST) are not intended for routine testing. These methods are very time-consuming and dependent on sporulating of hyphomycetes. In this multicentre study, a new (independent of sporulation) inoculum preparation method (containing a mixture of vegetative cells, hyphae, and conidia) was evaluated. Minimal inhibitory concentrations (MIC) of amphotericin B, posaconazole, and voriconazole of 180 molds were determined with two different culture media (YST and RPMI 1640) according to the DIN (Deutsches Institut für Normung) microdilution assay. 24 and 48 h MIC of quality control strains, tested per each test run, prepared with the new inoculum method were in the range of DIN. YST and RPMI 1640 media showed similar MIC distributions for all molds tested. MIC readings at 48 versus 24 h yield 1 log(2) higher MIC values and more than 90 % of the MICs read at 24 and 48 h were within ± 2 log(2) dilution. MIC end point reading (log(2 MIC-RPMI 1640)-log(2 MIC-YST)) of both media demonstrated a tendency to slightly lower MICs with RPMI 1640 medium. This study reports the results of a new, time-saving, and easy-to-perform method for inoculum preparation for routine susceptibility testing that can be applied for all types of spore-/non-spore and hyphae-forming fungi. PMID:22864604

  4. Diverse Bacteria Inhabit Living Hyphae of Phylogenetically Diverse Fungal Endophytes▿ †

    PubMed Central

    Hoffman, Michele T.; Arnold, A. Elizabeth

    2010-01-01

    Both the establishment and outcomes of plant-fungus symbioses can be influenced by abiotic factors, the interplay of fungal and plant genotypes, and additional microbes associated with fungal mycelia. Recently bacterial endosymbionts were documented in soilborne Glomeromycota and Mucoromycotina and in at least one species each of mycorrhizal Basidiomycota and Ascomycota. Here we show for the first time that phylogenetically diverse endohyphal bacteria occur in living hyphae of diverse foliar endophytes, including representatives of four classes of Ascomycota. We examined 414 isolates of endophytic fungi, isolated from photosynthetic tissues of six species of cupressaceous trees in five biogeographic provinces, for endohyphal bacteria using microscopy and molecular techniques. Viable bacteria were observed within living hyphae of endophytic Pezizomycetes, Dothideomycetes, Eurotiomycetes, and Sordariomycetes from all tree species and biotic regions surveyed. A focus on 29 fungus/bacterium associations revealed that bacterial and fungal phylogenies were incongruent with each other and with taxonomic relationships of host plants. Overall, eight families and 15 distinct genotypes of endohyphal bacteria were recovered; most were members of the Proteobacteria, but a small number of Bacillaceae also were found, including one that appears to occur as an endophyte of plants. Frequent loss of bacteria following subculturing suggests a facultative association. Our study recovered distinct lineages of endohyphal bacteria relative to previous studies, is the first to document their occurrence in foliar endophytes representing four of the most species-rich classes of fungi, and highlights for the first time their diversity and phylogenetic relationships with regard both to the endophytes they inhabit and the plants in which these endophyte-bacterium symbiota occur. PMID:20435775

  5. Aerial photography summary record system - five years later.

    USGS Publications Warehouse

    Lauterborn, T.J.

    1980-01-01

    Describes the APSRS, an automated information system for conventional aerial photography projects, established after the formation of the National Cartographic Information Center in the US Geological Survey in 1974. -after Author

  6. Study of nsLTPs in Lotus japonicus genome reveal a specific epidermal cell member (LjLTP10) regulated by drought stress in aerial organs with a putative role in cutin formation.

    PubMed

    Tapia, G; Morales-Quintana, L; Parra, C; Berbel, A; Alcorta, M

    2013-07-01

    The cuticle is the first defense against pathogens and the second way water is lost in plants. Hydrophobic layers covering aerial plant organs from primary stages of development form cuticle, including major classes of aliphatic wax components and cutin. Extensive research has been conducted to understand cuticle formation mechanisms in plants. However, many questions remain unresolved in the transport of lipid components to form cuticle. Database studies of the Lotus japonicus genome have revealed the presence of 24 sequences classified as putative non-specific lipid transfer proteins (nsLTPs), which were classified in seven groups; four groups were selected because of their expression in aerial organs. LjLTP8 forms a cluster with DIR1 in Arabidopsis thaliana while LjLTP6, LjLTP9, and LjLTP10 were grouped as type I LTPs. In silico studies showed a high level of structural conservation, and substrate affinity studies revealed palmitoyl-CoA as the most likely ligand for these LTPs, although the Lyso-Myristoyl Phosphatidyl Choline, Lyso-myristoyl phosphatidyl glycerol, and Lyso-stearyl phosphatidyl choline ligands also showed a high affinity with the proteins. The LjLTP6 and LjLTP10 genes were expressed in both the stems and the leaves under normal conditions and were highly induced during drought stress. LjLTP10 was the most induced gene in shoots during drought. The gene was only expressed in the epidermal cells of stems, primordial leaves, and young leaflets. LjLTP10 was positively regulated by MeJA but repressed by abscisic acid (ABA), ethylene, and H2O2, while LjLTP6 was weakly induced by MeJA, repressed by H2O2, and not affected by ABA and ethylene. We suggest that LjLTP10 is involved in plant development of stem and leaf cuticle, but also in acclimation to tolerate drought stress in L. japonicus. PMID:23733601

  7. Analysis of expressed sequence tags from Uromyces appendiculatus hyphae and haustoria and their comparison to sequences from other rust fungi

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Two separate cDNA libraries were prepared for RNA extracted from bean rust (Uromyces appendiculatus) hyphae and haustoria isolated from infected leaves bean leaves (Phaseolus vulgaris cv Pint 111) between 2 and 8 dpi. Approximately 13,000 clones were sequenced from both ends and the sequences assem...

  8. Microecology: Using Fast-Growing Filamentous Fungi to Study the Effects of Environmental Gradients on the Growth Patterns of Hyphae

    ERIC Educational Resources Information Center

    Delpech, Roger

    2004-01-01

    This paper describes some simple and rapid techniques for examining the growth responses of fungal hyphae cultivated on environmental gradients. The creation of such gradients using agar-based growth media in petri dishes is explained, along with recommendations for quantitative macroscopic and microscopic measurements. The intention is to provide…

  9. Aerial Photography Summary Record System

    USGS Publications Warehouse

    U.S. Geological Survey

    1998-01-01

    The Aerial Photography Summary Record System (APSRS) describes aerial photography projects that meet specified criteria over a given geographic area of the United States and its territories. Aerial photographs are an important tool in cartography and a number of other professions. Land use planners, real estate developers, lawyers, environmental specialists, and many other professionals rely on detailed and timely aerial photographs. Until 1975, there was no systematic approach to locate an aerial photograph, or series of photographs, quickly and easily. In that year, the U.S. Geological Survey (USGS) inaugurated the APSRS, which has become a standard reference for users of aerial photographs.

  10. Aerial Explorers and Robotic Ecosystems

    NASA Technical Reports Server (NTRS)

    Young, Larry A.; Pisanich, Greg

    2004-01-01

    A unique bio-inspired approach to autonomous aerial vehicle, a.k.a. aerial explorer technology is discussed. The work is focused on defining and studying aerial explorer mission concepts, both as an individual robotic system and as a member of a small robotic "ecosystem." Members of this robotic ecosystem include the aerial explorer, air-deployed sensors and robotic symbiotes, and other assets such as rovers, landers, and orbiters.

  11. MAPPING SPATIAL/TEMPORAL DISTRIBUTIONS OF GREEN MACROALGAE IN A PACIFIC NORTHWEST COASTAL ESTUARY VIA SMALL FORMAT COLOR INFRARED AERIAL PHOTOGRAPHY

    EPA Science Inventory

    A small format 35 mm hand-held camera with color infrared slide film was used to map blooms of benthic green macroalgae upon mudflats of Yaquina Bay estuary on the central Oregon coast, U.S.A. Oblique photographs were taken during a series of low tide events, when the intertidal...

  12. A Synchrotron FTIR Microspectroscopy Investigation of Fungal Hyphae Grown under Optimal and Stressed Conditions

    SciTech Connect

    Szeghalmi,A.; Kaminskyj, S.; Gough, K.

    2007-01-01

    Synchrotron FTIR can provide high spatial resolution (<10 {mu}m pixel size) in situ biochemical analyses of intact biotissues, an area of increasing importance in the post-genomic era, as gene functions and gene networks are coming under direct scrutiny. With this technique, we can simultaneously assess multiple aspects of cell biochemistry and cytoplasmic composition. In this paper, we report the first results of our synchrotron FTIR examination of hyphae of three important fungal model systems, each with sequenced genomes and a wealth of research: Aspergillus, Neurospora, and Rhizopus. We have analyzed the FTIR maps of Aspergillus nidulans cells containing the hypA1 allele, a well-characterized single-gene temperature-sensitive morphogenetic mutation. The hypA1 cells resemble wildtype at 28 {sup o}C but have growth defects at 42 {sup o}C. We have also investigated Neurospora and Rhizopus cultures grown in media with optimal or elevated pH. Significant differences between the spectra of the three fungi are likely related to differences in composition and structure. In addition, high spatial resolution synchrotron FTIR spectroscopy provides an outstanding method for monitoring subtle subcellular changes that accompany environmental stress.

  13. Bacillus subtilis attachment to Aspergillus niger hyphae results in mutually altered metabolism.

    PubMed

    Benoit, Isabelle; van den Esker, Marielle H; Patyshakuliyeva, Aleksandrina; Mattern, Derek J; Blei, Felix; Zhou, Miaomiao; Dijksterhuis, Jan; Brakhage, Axel A; Kuipers, Oscar P; de Vries, Ronald P; Kovács, Ákos T

    2015-06-01

    Interaction between microbes affects the growth, metabolism and differentiation of members of the microbial community. While direct and indirect competition, like antagonism and nutrient consumption have a negative effect on the interacting members of the population, microbes have also evolved in nature not only to fight, but in some cases to adapt to or support each other, while increasing the fitness of the community. The presence of bacteria and fungi in soil results in various interactions including mutualism. Bacilli attach to the plant root and form complex communities in the rhizosphere. Bacillus subtilis, when grown in the presence of Aspergillus niger, interacts similarly with the fungus, by attaching and growing on the hyphae. Based on data obtained in a dual transcriptome experiment, we suggest that both fungi and bacteria alter their metabolism during this interaction. Interestingly, the transcription of genes related to the antifungal and putative antibacterial defence mechanism of B. subtilis and A. niger, respectively, are decreased upon attachment of bacteria to the mycelia. Analysis of the culture supernatant suggests that surfactin production by B. subtilis was reduced when the bacterium was co-cultivated with the fungus. Our experiments provide new insights into the interaction between a bacterium and a fungus. PMID:25040940

  14. Aerial photographic reproductions

    USGS Publications Warehouse

    U.S. Geological Survey

    1971-01-01

    Geological Survey vertical aerial photography is obtained primarily for topographic and geologic mapping. Reproductions from this photography are usually satisfactory for general use. Because reproductions are not stocked, but are custom processed for each order, they cannot be returned for credit or refund.

  15. Aerial of the VAB

    NASA Technical Reports Server (NTRS)

    2000-01-01

    Even in this aerial view at KSC, the Vehicle Assembly Building is imposing. In front of it is the Launch Control Center. In the background is the Rotation/Processing Facility, next to the Banana Creek. In the foreground is the Saturn Causeway that leads to Launch Pads 39A and 39B.

  16. Aerial Perspective Artistry

    ERIC Educational Resources Information Center

    Wolfe, Linda

    2010-01-01

    This article presents a lesson centering on aerial perspective artistry of students and offers suggestions on how art teachers should carry this project out. This project serves to develop students' visual perception by studying reproductions by famous artists. This lesson allows one to imagine being lured into a landscape capable of captivating…

  17. Neutrophil-mediated protection of cultured human vascular endothelial cells from damage by growing Candida albicans hyphae

    SciTech Connect

    Edwards, J.E. Jr.; Rotrosen, D.; Fontaine, J.W.; Haudenschild, C.C.; Diamond, R.D.

    1987-05-01

    Interactions were studied between human neutrophils and cultured human umbilical vein endothelial cells invaded by Candida albicans. In the absence of neutrophils, progressive Candida germination and hyphal growth extensively damaged endothelial cell monolayers over a period of 4 to 6 hours, as determined both by morphological changes and release of /sup 51/Cr from radiolabeled endothelial cells. Monolayers were completely destroyed and replaced by hyphae after 18 hours of incubation. In contrast, when added 2 hours after the monolayers had been infected with Candida, neutrophils selectively migrated toward and attached to hyphae at points of hyphal penetration into individual endothelial cells (observed by time-lapse video-microscopy). Attached neutrophils spread over hyphal surfaces both within and beneath the endothelial cells; neutrophil recruitment to initial sites of leukocyte-Candida-endothelial cell interactions continued throughout the first 60 minutes of observation. Neutrophil spreading and stasis were observed only along Candida hyphae and at sites of Candida-endothelial cell interactions. These events resulted in 58.0% killing of Candida at 2 hours and subsequent clearance of Candida from endothelial cell monolayers, as determined by microcolony counts and morphological observation. On introduction of additional neutrophils to yield higher ratios of neutrophils to endothelial cells (10 neutrophils:1 endothelial cell), neutrophil migration toward hyphal elements continued. Despite retraction or displacement of occasional endothelial cells by invading Candida and neutrophils, most endothelial cells remained intact, viable, and motile as verified both by morphological observations and measurement of /sup 51/Cr release from radiolabeled monolayers.

  18. AERIAL RADIOLOGICAL SURVEYS

    SciTech Connect

    Proctor, A.E.

    1997-06-09

    Measuring terrestrial gamma radiation from airborne platforms has proved to be a useful method for characterizing radiation levels over large areas. Over 300 aerial radiological surveys have been carried out over the past 25 years including U.S. Department of Energy (DOE) sites, commercial nuclear power plants, Formerly Utilized Sites Remedial Action Program/Uranium Mine Tailing Remedial Action Program (FUSRAP/UMTRAP) sites, nuclear weapons test sites, contaminated industrial areas, and nuclear accident sites. This paper describes the aerial measurement technology currently in use by the Remote Sensing Laboratory (RSL) for routine environmental surveys and emergency response activities. Equipment, data-collection and -analysis methods, and examples of survey results are described.

  19. Aerial Video Imaging

    NASA Technical Reports Server (NTRS)

    1991-01-01

    When Michael Henry wanted to start an aerial video service, he turned to Johnson Space Center for assistance. Two NASA engineers - one had designed and developed TV systems in Apollo, Skylab, Apollo- Soyuz and Space Shuttle programs - designed a wing-mounted fiberglass camera pod. Camera head and angles are adjustable, and the pod is shaped to reduce vibration. The controls are located so a solo pilot can operate the system. A microprocessor displays latitude, longitude, and bearing, and a GPS receiver provides position data for possible legal references. The service has been successfully utilized by railroads, oil companies, real estate companies, etc.

  20. Novel Structural Features in Candida albicans Hyphal Glucan Provide a Basis for Differential Innate Immune Recognition of Hyphae Versus Yeast*

    PubMed Central

    Lowman, Douglas W.; Greene, Rachel R.; Bearden, Daniel W.; Kruppa, Michael D.; Pottier, Max; Monteiro, Mario A.; Soldatov, Dmitriy V.; Ensley, Harry E.; Cheng, Shih-Chin; Netea, Mihai G.; Williams, David L.

    2014-01-01

    The innate immune system differentially recognizes Candida albicans yeast and hyphae. It is not clear how the innate immune system effectively discriminates between yeast and hyphal forms of C. albicans. Glucans are major components of the fungal cell wall and key fungal pathogen-associated molecular patterns. C. albicans yeast glucan has been characterized; however, little is known about glucan structure in C. albicans hyphae. Using an extraction procedure that minimizes degradation of the native structure, we extracted glucans from C. albicans hyphal cell walls. 1H NMR data analysis revealed that, when compared with reference (1→3,1→6) β-linked glucans and C. albicans yeast glucan, hyphal glucan has a unique cyclical or “closed chain” structure that is not found in yeast glucan. GC/MS analyses showed a high abundance of 3- and 6-linked glucose units when compared with yeast β-glucan. In addition to the expected (1→3), (1→6), and 3,6 linkages, we also identified a 2,3 linkage that has not been reported previously in C. albicans. Hyphal glucan induced robust immune responses in human peripheral blood mononuclear cells and macrophages via a Dectin-1-dependent mechanism. In contrast, C. albicans yeast glucan was a much less potent stimulus. We also demonstrated the capacity of C. albicans hyphal glucan, but not yeast glucan, to induce IL-1β processing and secretion. This finding provides important evidence for understanding the immune discrimination between colonization and invasion at the mucosal level. When taken together, these data provide a structural basis for differential innate immune recognition of C. albicans yeast versus hyphae. PMID:24344127

  1. Infrared film for aerial photography

    USGS Publications Warehouse

    Anderson, William H.

    1979-01-01

    Considerable interest has developed recently in the use of aerial photographs for agricultural management. Even the simplest hand-held aerial photographs, especially those taken with color infrared film, often provide information not ordinarily available through routine ground observation. When fields are viewed from above, patterns and variations become more apparent, often allowing problems to be spotted which otherwise may go undetected.

  2. AERIAL PHOTOGRAPHY AND LEGAL APPLICATIONS

    EPA Science Inventory

    Aerial photographic interpretation is the process of examining objects on aerial photographs and determining their significance. t is often defined as both art and science because the process, and the quality of the derived information, is often a qualitative nature and much depe...

  3. AERIAL MEASURING SYSTEM IN JAPAN

    SciTech Connect

    Lyons, Craig; Colton, David

    2012-01-01

    The U.S. Department of Energy National Nuclear Security Agency’s Aerial Measuring System deployed personnel and equipment to partner with the U.S. Air Force in Japan to conduct multiple aerial radiological surveys. These were the first and most comprehensive sources of actionable information for U.S. interests in Japan and provided early confirmation to the government of Japan as to the extent of the release from the Fukushima Daiichi Nuclear Power Generation Station. Many challenges were overcome quickly during the first 48 hours; including installation and operation of Aerial Measuring System equipment on multiple U.S. Air Force Japan aircraft, flying over difficult terrain, and flying with talented pilots who were unfamiliar with the Aerial Measuring System flight patterns. These all combined to make for a dynamic and non-textbook situation. In addition, the data challenges of the multiple and on-going releases, and integration with the Japanese government to provide valid aerial radiological survey products that both military and civilian customers could use to make informed decisions, was extremely complicated. The Aerial Measuring System Fukushima response provided insight in addressing these challenges and gave way to an opportunity for the expansion of the Aerial Measuring System’s mission beyond the borders of the US.

  4. Aerial thermography for energy conservation

    NASA Technical Reports Server (NTRS)

    Jack, J. R.

    1978-01-01

    Thermal infrared scanning from an aircraft is a convenient and commercially available means for determining relative rates of energy loss from building roofs. The need to conserve energy as fuel costs makes the mass survey capability of aerial thermography an attractive adjunct to community energy awareness programs. Background information on principles of aerial thermography is presented. Thermal infrared scanning systems, flight and environmental requirements for data acquisition, preparation of thermographs for display, major users and suppliers of thermography, and suggested specifications for obtaining aerial scanning services were reviewed.

  5. Aerial views of the San Andreas Fault

    USGS Publications Warehouse

    Moore, M.

    1988-01-01

    These aerial photographs of the San Andreas fault were taken in 1965 by Robert E. Wallace of the U.S Geological Survey. The pictures were taken with a Rolliflex camera on 20 format black and white flim; Wallace was aboard a light, fixed-wing aircraft, flying mostly at low altitudes. He photographed the fault from San Francisco near its north end where it enters by the Salton Sea. These images represent only a sampling of the more than 300 images prodcued during this project. All the photographs reside in the U.S Geological Survey Library in Menlo Park, California. 

  6. Modeling aerial refueling operations

    NASA Astrophysics Data System (ADS)

    McCoy, Allen B., III

    Aerial Refueling (AR) is the act of offloading fuel from one aircraft (the tanker) to another aircraft (the receiver) in mid flight. Meetings between tanker and receiver aircraft are referred to as AR events and are scheduled to: escort one or more receivers across a large body of water; refuel one or more receivers; or train receiver pilots, tanker pilots, and boom operators. In order to efficiently execute the Aerial Refueling Mission, the Air Mobility Command (AMC) of the United States Air Force (USAF) depends on computer models to help it make tanker basing decisions, plan tanker sorties, schedule aircraft, develop new organizational doctrines, and influence policy. We have worked on three projects that have helped AMC improve its modeling and decision making capabilities. Optimal Flight Planning. Currently Air Mobility simulation and optimization software packages depend on algorithms which iterate over three dimensional fuel flow tables to compute aircraft fuel consumption under changing flight conditions. When a high degree of fidelity is required, these algorithms use a large amount of memory and CPU time. We have modeled the rate of aircraft fuel consumption with respect to AC GrossWeight, Altitude and Airspeed. When implemented, this formula will decrease the amount of memory and CPU time needed to compute sortie fuel costs and cargo capacity values. We have also shown how this formula can be used in optimal control problems to find minimum costs flight plans. Tanker Basing Demand Mismatch Index. Since 1992, AMC has relied on a Tanker Basing/AR Demand Mismatch Index which aggregates tanker capacity and AR demand data into six regions. This index was criticized because there were large gradients along regional boundaries. Meanwhile tankers frequently cross regional boundaries to satisfy the demand for AR support. In response we developed continuous functions to score locations with respect to their proximity to demand for AR support as well as their

  7. AERIAL VIEW, LOOKING SOUTHWEST, OF SILVER LAKE WEST SHORE WITH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AERIAL VIEW, LOOKING SOUTHWEST, OF SILVER LAKE WEST SHORE WITH RUINS OF SILVER LAKE MINE AT BOTTOM CENTER. NOTE CONTINUITY OF GEOLOGICAL FORMATIONS WHERE BOTTOM OF LAKE CAN BE SEEN. - Shenandoah-Dives Mill, 135 County Road 2, Silverton, San Juan County, CO

  8. BOREAS Level-0 C-130 Aerial Photography

    NASA Technical Reports Server (NTRS)

    Newcomer, Jeffrey A.; Dominguez, Roseanne; Hall, Forrest G. (Editor)

    2000-01-01

    For BOReal Ecosystem-Atmosphere Study (BOREAS), C-130 and other aerial photography was collected to provide finely detailed and spatially extensive documentation of the condition of the primary study sites. The NASA C-130 Earth Resources aircraft can accommodate two mapping cameras during flight, each of which can be fitted with 6- or 12-inch focal-length lenses and black-and-white, natural-color, or color-IR film, depending upon requirements. Both cameras were often in operation simultaneously, although sometimes only the lower resolution camera was deployed. When both cameras were in operation, the higher resolution camera was often used in a more limited fashion. The acquired photography covers the period of April to September 1994. The aerial photography was delivered as rolls of large format (9 x 9 inch) color transparency prints, with imagery from multiple missions (hundreds of prints) often contained within a single roll. A total of 1533 frames were collected from the C-130 platform for BOREAS in 1994. Note that the level-0 C-130 transparencies are not contained on the BOREAS CD-ROM set. An inventory file is supplied on the CD-ROM to inform users of all the data that were collected. Some photographic prints were made from the transparencies. In addition, BORIS staff digitized a subset of the tranparencies and stored the images in JPEG format. The CD-ROM set contains a small subset of the collected aerial photography that were the digitally scanned and stored as JPEG files for most tower and auxiliary sites in the NSA and SSA. See Section 15 for information about how to acquire additional imagery.

  9. Repulsion of Meloidogyne incognita by Alginate Pellets Containing Hyphae of Monacrosporium cionopagum, M. ellipsosporum, or Hirsutella rhossiliensis.

    PubMed

    Robinson, A F; Jaffee, B A

    1996-06-01

    The responses of second-stage juveniles (J2) of Meloidogyne incognita race 3 to calcium alginate pellets containing hyphae of the nematophagous fungi Monacrosporiura cionopagum, M. ellipsosporum, and Hirsutella rhossiliensis were examined using cylinders (38-mm-diam., 40 or 72 mm long) of sand (94% <250-mum particle size). Sand was wetted with a synthetic soil solution (10% moisture, 0.06 bar water potential). A layer of 10 or 20 pellets was placed 4 or 20 mm from one end of the cylinder. After 3, 5, or 13 days, J2 were put on both ends, on one end, or in the center; J2 were extracted from 8-ram-thick sections 1 or 2 days later. All three fungal pellets were repellent; pellets without fungi were not. Aqueous extracts of all pellets and of sand in which fungal pellets had been incubated were repellent, but acetone extracts redissolved in water were not. Injection of CO (20 mul/minute) into the pellet layer attracted J2 and increased fungal-induced mortality. In vials containing four randomly positioned pellets and 17 cm(3) of sand or loamy sand, the three fungi suppressed the invasion of cabbage roots by M. javanica J2. Counts of healthy and parasitized nematodes observed in roots or extracted from soil indicated that, in the vial assay, the failure of J2 to penetrate roots resulted primarily from parasitism rather than repulsion. Data were similar whether fungal inoculum consisted of pelletized hyphae or fungal-colonized Steinernema glaseri. Thus, the results indicate that nematode attractants and repellents can have major or negligible effects on the biological control efficacy of pelletized nematophagous fungi. Factors that might influence the importance of substances released by the pellets include the strength, geometry, and duration of gradients; pellet degradation by soil microflora; the nematode species involved; and attractants released by roots. PMID:19277129

  10. Repulsion of Meloidogyne incognita by Alginate Pellets Containing Hyphae of Monacrosporium cionopagum, M. ellipsosporum, or Hirsutella rhossiliensis

    PubMed Central

    Robinson, A. F.; Jaffee, B. A.

    1996-01-01

    The responses of second-stage juveniles (J2) of Meloidogyne incognita race 3 to calcium alginate pellets containing hyphae of the nematophagous fungi Monacrosporiura cionopagum, M. ellipsosporum, and Hirsutella rhossiliensis were examined using cylinders (38-mm-diam., 40 or 72 mm long) of sand (94% <250-μm particle size). Sand was wetted with a synthetic soil solution (10% moisture, 0.06 bar water potential). A layer of 10 or 20 pellets was placed 4 or 20 mm from one end of the cylinder. After 3, 5, or 13 days, J2 were put on both ends, on one end, or in the center; J2 were extracted from 8-ram-thick sections 1 or 2 days later. All three fungal pellets were repellent; pellets without fungi were not. Aqueous extracts of all pellets and of sand in which fungal pellets had been incubated were repellent, but acetone extracts redissolved in water were not. Injection of CO₂ (20 μl/minute) into the pellet layer attracted J2 and increased fungal-induced mortality. In vials containing four randomly positioned pellets and 17 cm³ of sand or loamy sand, the three fungi suppressed the invasion of cabbage roots by M. javanica J2. Counts of healthy and parasitized nematodes observed in roots or extracted from soil indicated that, in the vial assay, the failure of J2 to penetrate roots resulted primarily from parasitism rather than repulsion. Data were similar whether fungal inoculum consisted of pelletized hyphae or fungal-colonized Steinernema glaseri. Thus, the results indicate that nematode attractants and repellents can have major or negligible effects on the biological control efficacy of pelletized nematophagous fungi. Factors that might influence the importance of substances released by the pellets include the strength, geometry, and duration of gradients; pellet degradation by soil microflora; the nematode species involved; and attractants released by roots. PMID:19277129

  11. CMOS Imaging Sensor Technology for Aerial Mapping Cameras

    NASA Astrophysics Data System (ADS)

    Neumann, Klaus; Welzenbach, Martin; Timm, Martin

    2016-06-01

    In June 2015 Leica Geosystems launched the first large format aerial mapping camera using CMOS sensor technology, the Leica DMC III. This paper describes the motivation to change from CCD sensor technology to CMOS for the development of this new aerial mapping camera. In 2002 the DMC first generation was developed by Z/I Imaging. It was the first large format digital frame sensor designed for mapping applications. In 2009 Z/I Imaging designed the DMC II which was the first digital aerial mapping camera using a single ultra large CCD sensor to avoid stitching of smaller CCDs. The DMC III is now the third generation of large format frame sensor developed by Z/I Imaging and Leica Geosystems for the DMC camera family. It is an evolution of the DMC II using the same system design with one large monolithic PAN sensor and four multi spectral camera heads for R,G, B and NIR. For the first time a 391 Megapixel large CMOS sensor had been used as PAN chromatic sensor, which is an industry record. Along with CMOS technology goes a range of technical benefits. The dynamic range of the CMOS sensor is approx. twice the range of a comparable CCD sensor and the signal to noise ratio is significantly better than with CCDs. Finally results from the first DMC III customer installations and test flights will be presented and compared with other CCD based aerial sensors.

  12. Candida albicans cell shaving uncovers new proteins involved in cell wall integrity, yeast to hypha transition, stress response and host-pathogen interaction

    PubMed Central

    Hernáez, María Luisa; Reales-Calderon, Jose Antonio; Solis, Norma V.; Filler, Scott G.; Monteoliva, Lucia; Gil, Concha

    2015-01-01

    The ability to switch from yeast to hyphal growth is essential for virulence in Candida albicans. The cell surface is the initial point of contact between the fungus and the host. In this work, a free-gel proteomic strategy based on tryptic digestion of live yeast and hyphae cells and protein identification using LC-MS/MS methodology was used to identify cell surface proteins. Using this strategy, a total of 943 proteins were identified, of which 438 were in yeast and 928 were in hyphae. Of these proteins, 79 were closely related to the organization and biogenesis of the cell wall, including 28 GPI-anchored proteins, such as Hyr1 and Sod5 which were detected exclusively in hyphae, and Als2 and Sap10which were detected only in yeast. A group of 17 proteins of unknown function were subsequently studied by analysis of the corresponding deletion mutants. We found that four new proteins, Pst3, Tos1, Orf19.3060 and Orf19.5352 are involved in cell wall integrity and in C. albicans’ engulfment by macrophages. Moreover, the putative NADH-ubiquinone-related proteins, Ali1, Mci4, Orf19.287 and Orf19.7590, are also involved in osmotic and oxidative resistance, yeast to hypha transition and the ability to damage and invade oral epithelial cells. PMID:26087349

  13. Aerial camera auto focusing system

    NASA Astrophysics Data System (ADS)

    Wang, Xuan; Lan, Gongpu; Gao, Xiaodong; Liang, Wei

    2012-10-01

    Before the aerial photographic task, the cameras focusing work should be performed at first to compensate the defocus caused by the changes of the temperature, pressure etc. A new method of aerial camera auto focusing is proposed through traditional photoelectric self-collimation combined with image processing method. Firstly, the basic principles of optical self-collimation and image processing are introduced. Secondly, the limitations of the two are illustrated and the benefits of the new method are detailed. Then the basic principle, the system composition and the implementation of this new method are presented. Finally, the data collection platform is set up reasonably and the focus evaluation function curve is draw. The results showed that: the method can be used in the Aerial camera focusing field, adapt to the aviation equipment trends of miniaturization and lightweight .This paper is helpful to the further work of accurate and automatic focusing.

  14. Dynamics of aerial target pursuit

    NASA Astrophysics Data System (ADS)

    Pal, S.

    2015-12-01

    During pursuit and predation, aerial species engage in multitasking behavior that involve simultaneous target detection, tracking, decision-making, approach and capture. The mobility of the pursuer and the target in a three dimensional environment during predation makes the capture task highly complex. Many researchers have studied and analyzed prey capture dynamics in different aerial species such as insects and bats. This article focuses on reviewing the capture strategies adopted by these species while relying on different sensory variables (vision and acoustics) for navigation. In conclusion, the neural basis of these capture strategies and some applications of these strategies in bio-inspired navigation and control of engineered systems are discussed.

  15. AERIAL OF VEHICLE ASSEMBLY BUILDING & SURROUNDING AREA

    NASA Technical Reports Server (NTRS)

    1977-01-01

    AERIAL OF VEHICLE ASSEMBLY BUILDING & SURROUNDING AREA KSC-377C-0082.41 116-KSC-377C-82.41, P-15877, ARCHIVE-04151 Aerial view - Shuttle construction progress - VAB and Orbiter Processing Facilities - direction northwest.

  16. 29 CFR 1926.453 - Aerial lifts.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... lift, except in case of emergency. (x) Climbers shall not be worn while performing work from an aerial... 29 Labor 8 2010-07-01 2010-07-01 false Aerial lifts. 1926.453 Section 1926.453 Labor Regulations...) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Scaffolds § 1926.453 Aerial lifts. (a)...

  17. Reconnaissance mapping from aerial photographs

    NASA Technical Reports Server (NTRS)

    Weeden, H. A.; Bolling, N. B. (Principal Investigator)

    1975-01-01

    The author has identified the following significant results. Engineering soil and geology maps were successfully made from Pennsylvania aerial photographs taken at scales from 1:4,800 to 1:60,000. The procedure involved a detailed study of a stereoscopic model while evaluating landform, drainage, erosion, color or gray tones, tone and texture patterns, vegetation, and cultural or land use patterns.

  18. New insights into membrane-active action in plasma membrane of fungal hyphae by the lipopeptide antibiotic bacillomycin L.

    PubMed

    Zhang, Bao; Dong, Chunjuan; Shang, Qingmao; Han, Yuzhu; Li, Pinglan

    2013-09-01

    Bacillomycin L, a natural iturinic lipopeptide produced by Bacillus amyloliquefaciens, is characterized by strong antifungal activities against a variety of agronomically important filamentous fungi including Rhizoctonia solani Kühn. Prior to this study, the role of membrane permeabilization in the antimicrobial activity of bacillomycin L against plant pathogenic fungi had not been investigated. To shed light on the mechanism of this antifungal activity, the permeabilization of R. solani hyphae by bacillomycin L was investigated and compared with that by amphotericin B, a polyene antibiotic which is thought to act primarily through membrane disruption. Our results derived from electron microscopy, various fluorescent techniques and gel retardation experiments revealed that the antifungal activity of bacillomycin L may be not solely a consequence of fungal membrane permeabilization, but related to the interaction of it with intracellular targets. Our findings provide more insights into the mode of action of bacillomycin L and other iturins, which could in turn help to develop new or improved antifungal formulations or result in novel strategies to prevent fungal spoilage. PMID:23756779

  19. In Candida albicans hyphae, Sec2p is physically associated with SEC2 mRNA on secretory vesicles

    PubMed Central

    Caballero-Lima, David; Hautbergue, Guillaume M; Wilson, Stuart A; Sudbery, Peter E

    2014-01-01

    Candida albicans hyphae grow in a highly polarized fashion from their tips. This polarized growth requires the continuous delivery of secretory vesicles to the tip region. Vesicle delivery depends on Sec2p, the Guanine Exchange Factor (GEF) for the Rab GTPase Sec4p. GTP bound Sec4p is required for the transit of secretory vesicles from the trans-Golgi to sites of polarized growth. We previously showed that phosphorylation of Sec2p at residue S584 was necessary for Sec2p to support hyphal, but not yeast growth. Here we show that on secretory vesicles SEC2 mRNA is physically associated with Sec2p. Moreover, we show that the phosphorylation of S584 allows SEC2 mRNA to dissociate from Sec2p and we speculate that this is necessary for Sec2p function and/or translation. During hyphal extension, the growing tip may be separated from the nucleus by up to 15 μm. Transport of SEC2 mRNA on secretory vesicles to the tip localizes SEC2 translation to tip allowing a sufficient accumulation of this key protein at the site of polarized growth. PMID:25231350

  20. Assessment of Photogrammetric Mapping Accuracy Based on Variation Flying Altitude Using Unmanned Aerial Vehicle

    NASA Astrophysics Data System (ADS)

    Udin, W. S.; Ahmad, A.

    2014-02-01

    Photogrammetry is the earliest technique used to collect data for topographic mapping. The recent development in aerial photogrammetry is the used of large format digital aerial camera for producing topographic map. The aerial photograph can be in the form of metric or non-metric imagery. The cost of mapping using aerial photogrammetry is very expensive. In certain application, there is a need to map small area with limited budget. Due to the development of technology, small format aerial photogrammetry technology has been introduced and offers many advantages. Currently, digital map can be extracted from digital aerial imagery of small format camera mounted on light weight platform such as unmanned aerial vehicle (UAV). This study utilizes UAV system for large scale stream mapping. The first objective of this study is to investigate the use of light weight rotary-wing UAV for stream mapping based on different flying height. Aerial photograph were acquired at 60% forward lap and 30% sidelap specifications. Ground control points and check points were established using Total Station technique. The digital camera attached to the UAV was calibrated and the recovered camera calibration parameters were then used in the digital images processing. The second objective is to determine the accuracy of the photogrammetric output. In this study, the photogrammetric output such as stereomodel in three dimensional (3D), contour lines, digital elevation model (DEM) and orthophoto were produced from a small stream of 200m long and 10m width. The research output is evaluated for planimetry and vertical accuracy using root mean square error (RMSE). Based on the finding, sub-meter accuracy is achieved and the RMSE value decreases as the flying height increases. The difference is relatively small. Finally, this study shows that UAV is very useful platform for obtaining aerial photograph and subsequently used for photogrammetric mapping and other applications.

  1. Evaluation of the morphological effects of TDT 067 (terbinafine in Transfersome) and conventional terbinafine on dermatophyte hyphae in vitro and in vivo.

    PubMed

    Ghannoum, M; Isham, N; Henry, W; Kroon, H-A; Yurdakul, S

    2012-05-01

    TDT 067 is a novel, carrier-based dosage form of terbinafine in Transfersome (1.5%) formulated for topical delivery of terbinafine to the nail, nail bed, and surrounding tissue. We examined the effects of TDT 067 and conventional terbinafine on the morphology of dermatophytes. Trichophyton rubrum hyphae were exposed to TDT 067 or terbinafine (15 mg/ml) and examined under white light, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Subungual debris from patients treated with TDT 067 in a clinical trial was also examined. Exposure of T. rubrum hyphae to TDT 067 led to rapid and extensive ultrastructural changes. Hyphal distortion was evident as early as 4 h after exposure to TDT 067. After 24 h, there was complete disruption of hyphal structure with few intact hyphae remaining. Exposure to terbinafine resulted in morphological alterations similar to those seen with TDT 067; however, the effects of TDT 067 were more extensive, whereas a portion of hyphae remained intact after 24 h of exposure to terbinafine. Lipid droplets were observed under TEM following 30 min of exposure to TDT 067, which after 24 h had filled the intracellular space. These effects were confirmed in vivo in subungual debris from patients with onychomycosis who received topical treatment with TDT 067. The Transfersome in TDT 067 may potentiate the action of terbinafine by delivering terbinafine more effectively to its site of action inside the fungus. Our in vivo data confirm that TDT 067 can enter fungus in the nail bed of patients with onychomycosis and exert its antifungal effects. PMID:22354309

  2. Transcriptional Switch On of ssgA by A-Factor, Which Is Essential for Spore Septum Formation in Streptomyces griseus

    PubMed Central

    Yamazaki, Haruka; Ohnishi, Yasuo; Horinouchi, Sueharu

    2003-01-01

    A-factor (2-isocapryloyl-3R-hydroxymethyl-γ-butyrolactone) triggers morphological development and secondary metabolism in Streptomyces griseus. A transcriptional activator (AdpA) in the A-factor regulatory cascade switches on a number of genes required for both processes. AdBS11 was identified in a library of the DNA fragments that are bound by AdpA and mapped upstream of ssgA, which is essential for septum formation in aerial hyphae. Gel mobility shift assays and DNase I footprinting revealed three AdpA-binding sites at nucleotide positions about −235 (site 1), −110 (site 2), and +60 (site 3) with respect to the transcriptional start point, p1, of ssgA. ssgA had two transcriptional start points, one starting at 124 nucleotides (p1) and the other starting at 79 nucleotides (p2) upstream of the start codon of ssgA. Of the three binding sites, only sites 1 and 2 were required for transcriptional activation of p1 and p2 by AdpA. The transcriptional switch on of ssgA required the extracytoplasmic function sigma factor, σAdsA, in addition to AdpA. However, it was unlikely that σAdsA recognized the two ssgA promoters, since their −35 and −10 sequences were not similar to the promoter sequence motifs recognized by σBldN, a σAdsA homologue of Streptomyces coelicolor A3(2). An ssgA disruptant formed aerial hyphae, but did not form spores, irrespective of the carbon source of the medium, which indicated that ssgA is a member of the whi genes. Transcriptional analysis of ssfR, located just upstream of ssgA and encoding an IclR-type transcriptional regulator, suggested that no read-through from ssfR into ssgA occurred, and ssgA was transcribed in the absence of ssfR. ssgA was thus found to be controlled by AdpA and not by SsfR to a detectable extent. SsfR appeared to regulate spore septum formation independently of SsgA or through interaction with SsgA in some unknown way, because an ssfR disruptant also showed a whi phenotype. PMID:12562798

  3. Trends in quantitative aerial thermography

    SciTech Connect

    Schott, J.R.; Wilkinson, E.P.

    1983-06-01

    Recent improvements in aerial thermographic techniques, particularly in achievable spatial resolution and noise equivalent temperature variation, have enabled the use of thermography in a more objective fashion. Interpretation of the information contained in thermograms has also been improved through the use of certain techniques accounting for roof material type (emissivity), background effects, and atmospheric variables. With current methods, roof surface temperature from aerial imagery can be measured to within 1.8/sup 0/F (1.0/sup 0/C) of the actual temperature. These advances in thermogram analysis have opened the door for potential direct measurement of rooftop heat-loss levels from thermogram data. Ultimately, it is felt that this type of information would make it feasible to direct intensive energy-conservation efforts toward a smaller population, where the need and cost benefits will be the greatest.

  4. Aerial Photographs and Satellite Images

    USGS Publications Warehouse

    U.S. Geological Survey

    1997-01-01

    Photographs and other images of the Earth taken from the air and from space show a great deal about the planet's landforms, vegetation, and resources. Aerial and satellite images, known as remotely sensed images, permit accurate mapping of land cover and make landscape features understandable on regional, continental, and even global scales. Transient phenomena, such as seasonal vegetation vigor and contaminant discharges, can be studied by comparing images acquired at different times. The U.S. Geological Survey (USGS), which began using aerial photographs for mapping in the 1930's, archives photographs from its mapping projects and from those of some other Federal agencies. In addition, many images from such space programs as Landsat, begun in 1972, are held by the USGS. Most satellite scenes can be obtained only in digital form for use in computer-based image processing and geographic information systems, but in some cases are also available as photographic products.

  5. Aerial robotic data acquisition system

    SciTech Connect

    Hofstetter, K.J.; Hayes, D.W.; Pendergast, M.M.; Corban, J.E.

    1993-12-31

    A small, unmanned aerial vehicle (UAV), equipped with sensors for physical and chemical measurements of remote environments, is described. A miniature helicopter airframe is used as a platform for sensor testing and development. The sensor output is integrated with the flight control system for real-time, interactive, data acquisition and analysis. Pre-programmed flight missions will be flown with several sensors to demonstrate the cost-effective surveillance capabilities of this new technology.

  6. Telemetry of Aerial Radiological Measurements

    SciTech Connect

    H. W. Clark, Jr.

    2002-10-01

    Telemetry has been added to National Nuclear Security Administration's (NNSA's) Aerial Measuring System (AMS) Incident Response aircraft to accelerate availability of aerial radiological mapping data. Rapid aerial radiological mapping is promptly performed by AMS Incident Response aircraft in the event of a major radiological dispersal. The AMS airplane flies the entire potentially affected area, plus a generous margin, to provide a quick look at the extent and severity of the event. The primary result of the AMS Incident Response over flight is a map of estimated exposure rate on the ground along the flight path. Formerly, it was necessary to wait for the airplane to land before the map could be seen. Now, while the flight is still in progress, data are relayed via satellite directly from the aircraft to an operations center, where they are displayed and disseminated. This permits more timely utilization of results by decision makers and redirection of the mission to optimize its value. The current telemetry capability can cover all of North America. Extension to a global capability is under consideration.

  7. Autonomous navigation with teams of aerial robots

    NASA Astrophysics Data System (ADS)

    Michael, Nathan; Kumar, Vijay

    2011-06-01

    There are many examples in nature where large groups of individuals are able to maintain three-dimensional formations while navigating in complex environments. This paper addresses the development of a framework and robot controllers that enable a group of aerial robots to maintain a formation with partial state information while avoiding collisions. The central concept is to develop a low-dimensional abstraction of the large teams of robots, facilitate planning, command, and control in a low-dimensional space, and to realize commands or plans in the abstract space by synthesizing controllers for individual robots that respect the specified abstraction. The fundamental problem that is addressed in this paper relates to coordinated control of multiple UAVs in close proximity. We develop a representation for a team of robots based on the first and second statistical moments of the system and design kinematic, exponentially stabilizing controllers for point robots. The selection of representation permits a controller design that is invariant to the number of robots in the system, requires limited global state information, and reduces the complexity of the planning problem by generating an abstract planning and control space determined by the moment parameterization. We present experimental results with a team of quadrotors and discuss considerations such as aerodynamic interactions between robots.

  8. A Spherical Aerial Terrestrial Robot

    NASA Astrophysics Data System (ADS)

    Dudley, Christopher J.

    This thesis focuses on the design of a novel, ultra-lightweight spherical aerial terrestrial robot (ATR). The ATR has the ability to fly through the air or roll on the ground, for applications that include search and rescue, mapping, surveillance, environmental sensing, and entertainment. The design centers around a micro-quadcopter encased in a lightweight spherical exoskeleton that can rotate about the quadcopter. The spherical exoskeleton offers agile ground locomotion while maintaining characteristics of a basic aerial robot in flying mode. A model of the system dynamics for both modes of locomotion is presented and utilized in simulations to generate potential trajectories for aerial and terrestrial locomotion. Details of the quadcopter and exoskeleton design and fabrication are discussed, including the robot's turning characteristic over ground and the spring-steel exoskeleton with carbon fiber axle. The capabilities of the ATR are experimentally tested and are in good agreement with model-simulated performance. An energy analysis is presented to validate the overall efficiency of the robot in both modes of locomotion. Experimentally-supported estimates show that the ATR can roll along the ground for over 12 minutes and cover the distance of 1.7 km, or it can fly for 4.82 minutes and travel 469 m, on a single 350 mAh battery. Compared to a traditional flying-only robot, the ATR traveling over the same distance in rolling mode is 2.63-times more efficient, and in flying mode the system is only 39 percent less efficient. Experimental results also demonstrate the ATR's transition from rolling to flying mode.

  9. Astronomical Methods in Aerial Navigation

    NASA Technical Reports Server (NTRS)

    Beij, K Hilding

    1925-01-01

    The astronomical method of determining position is universally used in marine navigation and may also be of service in aerial navigation. The practical application of the method, however, must be modified and adapted to conform to the requirements of aviation. Much of this work of adaptation has already been accomplished, but being scattered through various technical journals in a number of languages, is not readily available. This report is for the purpose of collecting under one cover such previous work as appears to be of value to the aerial navigator, comparing instruments and methods, indicating the best practice, and suggesting future developments. The various methods of determining position and their application and value are outlined, and a brief resume of the theory of the astronomical method is given. Observation instruments are described in detail. A complete discussion of the reduction of observations follows, including a rapid method of finding position from the altitudes of two stars. Maps and map cases are briefly considered. A bibliography of the subject is appended.

  10. 29 CFR 1926.453 - Aerial lifts.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 8 2013-07-01 2013-07-01 false Aerial lifts. 1926.453 Section 1926.453 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Scaffolds § 1926.453 Aerial lifts. (a) General requirements. (1) Unless otherwise provided...

  11. A Classroom Simulation of Aerial Photography.

    ERIC Educational Resources Information Center

    Baker, Simon

    1981-01-01

    Explains how a simulation of aerial photography can help students in a college level beginning course on interpretation of aerial photography understand the interrelationships of the airplane, the camera, and the earth's surface. Procedures, objectives, equipment, and scale are discussed. (DB)

  12. BOREAS Level-0 ER-2 Aerial Photography

    NASA Technical Reports Server (NTRS)

    Newcomer, Jeffrey A.; Dominquez, Roseanne; Hall, Forrest G. (Editor)

    2000-01-01

    For BOReal Ecosystem-Atmosphere Study (BOREAS), the ER-2 and other aerial photography was collected to provide finely detailed and spatially extensive documentation of the condition of the primary study sites. The ER-2 aerial photography consists of color-IR transparencies collected during flights in 1994 and 1996 over the study areas.

  13. Carbon transfer from photosynthesis to below ground fine root/hyphae respiration in Quercus serrata using stable carbon isotope pulse labeling

    NASA Astrophysics Data System (ADS)

    Dannoura, M.; Kominami, Y.; Takanashi, S.; Takahashi, K.

    2013-12-01

    Studying carbon allocation in trees is a key to better understand belowground carbon cycle and its response to climate change. Tracing 13C in tree and soil compartments after pulse labeling is one of powerful tool to study the fate of carbon in forest ecosystems. This experiment was conducted in Yamashiro experimental forest, Kyoto, Japan. Annual mean temperature and precipitation from 1994 to 2009 are 15.5 ° C and 1,388 mm respectively. The branch pulse labeling were done 7 times in 2011 using same branch of Quercus serrata (H:11.7 m, DBH; 33.7 cm) to see seasonal variations of carbon velocity. Whole crown labeling of Quercus serrata (H:9 m, DBH; 13.7 cm) was done in 2012 to study carbon allocation and to especially focus on belowground carbon flux until to the hyphae respiration. Pure 13CO2 (99.9%) was injected to the labeling chamber which was set to branch or crown. Then, after one hour of branch labeling and 3.5 hour for crown labeling, the chamber was opened. Trunk respiration chambers, fine root chambers and hyphae chambers were set to the target tree to trace labeled carbon in the CO2 efflux. 41 μm mesh was used to exclude ingrowth of roots into hyphae chambers. The results show that the velocity of carbon through the tree varied seasonally, with higher velocity in summer than autumn, averaging 0.47 m h-1. Half-lives of labeled carbon in autotrophic respiration were similar above and below ground during the growing season, but they were twice longer in trunk than in root in autumn. From the whole crown labeling done end of growing season, the 13CO2 signal was observed 25 hours after labeling in trunk chamber and 34-37.7 hours after labeling in fine root and hyphae respiration almost simultaneously. Half-lives of 13 was longer in trunk than below ground. Trunk respiration was still using labelled carbon during winter suggesting that winter trunk respiration is partly fueled by carbon stored in the trunk at the end of the growing season.

  14. Adaptive planning of emergency aerial photogrammetric mission

    NASA Astrophysics Data System (ADS)

    Shen, Fuqiang; Zhu, Qing; Zhang, Junxiao; Miao, Shuangxi; Zhou, Xingxia; Cao, Zhenyu

    2015-12-01

    Aiming at the diversity of emergency aerial photogrammetric mission requirements, complex ground and air environmental constraints make the planning mission time-consuming. This paper presents a fast adaptation for the UAV aerial photogrammetric mission planning. First, Building emergency aerial UAVs mission the unified expression of UAVs model and mechanical model of performance parameters in the semantic space make the integrated expression of mission requirements and low altitude environment. Proposed match assessment method which based on resource and mission efficiency. Made the Adaptive match of UAV aerial resources and mission. According to the emergency aerial resource properties, considering complex air-ground environment and mission requirements constraints. Made accurate design of UAV route. Experimental results show, the method scientific and efficient, greatly enhanced the emergency response rate.

  15. Automatic Sea Bird Detection from High Resolution Aerial Imagery

    NASA Astrophysics Data System (ADS)

    Mader, S.; Grenzdörffer, G. J.

    2016-06-01

    Great efforts are presently taken in the scientific community to develop computerized and (fully) automated image processing methods allowing for an efficient and automatic monitoring of sea birds and marine mammals in ever-growing amounts of aerial imagery. Currently the major part of the processing, however, is still conducted by especially trained professionals, visually examining the images and detecting and classifying the requested subjects. This is a very tedious task, particularly when the rate of void images regularly exceeds the mark of 90%. In the content of this contribution we will present our work aiming to support the processing of aerial images by modern methods from the field of image processing. We will especially focus on the combination of local, region-based feature detection and piecewise global image segmentation for automatic detection of different sea bird species. Large image dimensions resulting from the use of medium and large-format digital cameras in aerial surveys inhibit the applicability of image processing methods based on global operations. In order to efficiently handle those image sizes and to nevertheless take advantage of globally operating segmentation algorithms, we will describe the combined usage of a simple performant feature detector based on local operations on the original image with a complex global segmentation algorithm operating on extracted sub-images. The resulting exact segmentation of possible candidates then serves as a basis for the determination of feature vectors for subsequent elimination of false candidates and for classification tasks.

  16. Geometric Calibration and Validation of Ultracam Aerial Sensors

    NASA Astrophysics Data System (ADS)

    Gruber, Michael; Schachinger, Bernhard; Muick, Marc; Neuner, Christian; Tschemmernegg, Helfried

    2016-03-01

    We present details of the calibration and validation procedure of UltraCam Aerial Camera systems. Results from the laboratory calibration and from validation flights are presented for both, the large format nadir cameras and the oblique cameras as well. Thus in this contribution we show results from the UltraCam Eagle and the UltraCam Falcon, both nadir mapping cameras, and the UltraCam Osprey, our oblique camera system. This sensor offers a mapping grade nadir component together with the four oblique camera heads. The geometric processing after the flight mission is being covered by the UltraMap software product. Thus we present details about the workflow as well. The first part consists of the initial post-processing which combines image information as well as camera parameters derived from the laboratory calibration. The second part, the traditional automated aerial triangulation (AAT) is the step from single images to blocks and enables an additional optimization process. We also present some special features of our software, which are designed to better support the operator to analyze large blocks of aerial images and to judge the quality of the photogrammetric set-up.

  17. Region Three Aerial Measurement System Flight Planning Tool - 12006

    SciTech Connect

    Messick, Chuck; Pham, Minh; Smith, Ron; Isiminger, Dave

    2012-07-01

    The Region 3 Aerial Measurement System Flight Planning Tool is used by the National Nuclear Security Agency (NNSA), United States Department of Energy, Radiological Assistance Program, Region 3, to respond to emergency radiological situations. The tool automates the flight planning package process while decreasing Aerial Measuring System response times and decreases the potential for human error. Deployment of the Region Three Aerial Measurement System Flight Planning Tool has resulted in an immediate improvement to the flight planning process in that time required for mission planning has been reduced from 1.5 hours to 15 minutes. Anecdotally, the RAP team reports that the rate of usable data acquired during surveys has improved from 40-60 percent to over 90 percent since they began using the tool. Though the primary product of the flight planning tool is a pdf format document for use by the aircraft flight crew, the RAP team has begun carrying their laptop computer on the aircraft during missions. By connecting a Global Positioning System (GPS) device to the laptop and using ESRI ArcMap's GPS tool bar to overlay the aircraft position directly on the flight plan in real time, the RAP team can evaluate and correct the aircraft position as the mission is executed. (authors)

  18. COCOA: tracking in aerial imagery

    NASA Astrophysics Data System (ADS)

    Ali, Saad; Shah, Mubarak

    2006-05-01

    Unmanned Aerial Vehicles (UAVs) are becoming a core intelligence asset for reconnaissance, surveillance and target tracking in urban and battlefield settings. In order to achieve the goal of automated tracking of objects in UAV videos we have developed a system called COCOA. It processes the video stream through number of stages. At first stage platform motion compensation is performed. Moving object detection is performed to detect the regions of interest from which object contours are extracted by performing a level set based segmentation. Finally blob based tracking is performed for each detected object. Global tracks are generated which are used for higher level processing. COCOA is customizable to different sensor resolutions and is capable of tracking targets as small as 100 pixels. It works seamlessly for both visible and thermal imaging modes. The system is implemented in Matlab and works in a batch mode.

  19. The DOE ARM Aerial Facility

    SciTech Connect

    Schmid, Beat; Tomlinson, Jason M.; Hubbe, John M.; Comstock, Jennifer M.; Mei, Fan; Chand, Duli; Pekour, Mikhail S.; Kluzek, Celine D.; Andrews, Elisabeth; Biraud, S.; McFarquhar, Greg

    2014-05-01

    The Department of Energy Atmospheric Radiation Measurement (ARM) Program is a climate research user facility operating stationary ground sites that provide long-term measurements of climate relevant properties, mobile ground- and ship-based facilities to conduct shorter field campaigns (6-12 months), and the ARM Aerial Facility (AAF). The airborne observations acquired by the AAF enhance the surface-based ARM measurements by providing high-resolution in-situ measurements for process understanding, retrieval-algorithm development, and model evaluation that are not possible using ground- or satellite-based techniques. Several ARM aerial efforts were consolidated into the AAF in 2006. With the exception of a small aircraft used for routine measurements of aerosols and carbon cycle gases, AAF at the time had no dedicated aircraft and only a small number of instruments at its disposal. In this "virtual hangar" mode, AAF successfully carried out several missions contracting with organizations and investigators who provided their research aircraft and instrumentation. In 2009, AAF started managing operations of the Battelle-owned Gulfstream I (G-1) large twin-turboprop research aircraft. Furthermore, the American Recovery and Reinvestment Act of 2009 provided funding for the procurement of over twenty new instruments to be used aboard the G-1 and other AAF virtual-hangar aircraft. AAF now executes missions in the virtual- and real-hangar mode producing freely available datasets for studying aerosol, cloud, and radiative processes in the atmosphere. AAF is also engaged in the maturation and testing of newly developed airborne sensors to help foster the next generation of airborne instruments.

  20. Unmanned aerial survey of elephants.

    PubMed

    Vermeulen, Cédric; Lejeune, Philippe; Lisein, Jonathan; Sawadogo, Prosper; Bouché, Philippe

    2013-01-01

    The use of a UAS (Unmanned Aircraft System) was tested to survey large mammals in the Nazinga Game Ranch in the south of Burkina Faso. The Gatewing ×100™ equipped with a Ricoh GR III camera was used to test animal reaction as the UAS passed, and visibility on the images. No reaction was recorded as the UAS passed at a height of 100 m. Observations, made on a set of more than 7000 images, revealed that only elephants (Loxodonta africana) were easily visible while medium and small sized mammals were not. The easy observation of elephants allows experts to enumerate them on images acquired at a height of 100 m. We, therefore, implemented an aerial strip sample count along transects used for the annual wildlife foot count. A total of 34 elephants were recorded on 4 transects, each overflown twice. The elephant density was estimated at 2.47 elephants/km(2) with a coefficient of variation (CV%) of 36.10%. The main drawback of our UAS was its low autonomy (45 min). Increased endurance of small UAS is required to replace manned aircraft survey of large areas (about 1000 km of transect per day vs 40 km for our UAS). The monitoring strategy should be adapted according to the sampling plan. Also, the UAS is as expensive as a second-hand light aircraft. However the logistic and flight implementation are easier, the running costs are lower and its use is safer. Technological evolution will make civil UAS more efficient, allowing them to compete with light aircraft for aerial wildlife surveys. PMID:23405088

  1. Unmanned Aerial Survey of Elephants

    PubMed Central

    Vermeulen, Cédric; Lejeune, Philippe; Lisein, Jonathan; Sawadogo, Prosper; Bouché, Philippe

    2013-01-01

    The use of a UAS (Unmanned Aircraft System) was tested to survey large mammals in the Nazinga Game Ranch in the south of Burkina Faso. The Gatewing ×100™ equipped with a Ricoh GR III camera was used to test animal reaction as the UAS passed, and visibility on the images. No reaction was recorded as the UAS passed at a height of 100 m. Observations, made on a set of more than 7000 images, revealed that only elephants (Loxodonta africana) were easily visible while medium and small sized mammals were not. The easy observation of elephants allows experts to enumerate them on images acquired at a height of 100 m. We, therefore, implemented an aerial strip sample count along transects used for the annual wildlife foot count. A total of 34 elephants were recorded on 4 transects, each overflown twice. The elephant density was estimated at 2.47 elephants/km2 with a coefficient of variation (CV%) of 36.10%. The main drawback of our UAS was its low autonomy (45 min). Increased endurance of small UAS is required to replace manned aircraft survey of large areas (about 1000 km of transect per day vs 40 km for our UAS). The monitoring strategy should be adapted according to the sampling plan. Also, the UAS is as expensive as a second-hand light aircraft. However the logistic and flight implementation are easier, the running costs are lower and its use is safer. Technological evolution will make civil UAS more efficient, allowing them to compete with light aircraft for aerial wildlife surveys. PMID:23405088

  2. ATP-Dependent but Proton Gradient-Independent Polyphosphate-Synthesizing Activity in Extraradical Hyphae of an Arbuscular Mycorrhizal Fungus▿ †

    PubMed Central

    Tani, Chiharu; Ohtomo, Ryo; Osaki, Mitsuru; Kuga, Yukari; Ezawa, Tatsuhiro

    2009-01-01

    Arbuscular mycorrhizal (AM) fungi benefit their host plants by supplying phosphate obtained from the soil. Polyphosphate is thought to act as the key intermediate in this process, but little is currently understood about how polyphosphate is synthesized or translocated within arbuscular mycorrhizas. Glomus sp. strain HR1 was grown with marigold in a mesh bag compartment system, and extraradical hyphae were harvested and fractionated by density gradient centrifugation. Using this approach, three distinct layers were obtained: layers 1 and 2 were composed of amorphous and membranous materials, together with mitochondria, lipid bodies, and electron-opaque bodies, and layer 3 was composed mainly of partially broken hyphae and fragmented cell walls. The polyphosphate kinase/luciferase system, a highly sensitive polyphosphate detection method, enabled the detection of polyphosphate-synthesizing activity in layer 2 in the presence of ATP. This activity was inhibited by vanadate but not by bafilomycin A1 or a protonophore, suggesting that ATP may not energize the reaction through H+-ATPase but may act as a direct substrate in the reaction. This report represents the first demonstration that AM fungi possess polyphosphate-synthesizing activity that is localized in the organelle fraction and not in the cytosol or at the plasma membrane. PMID:19767467

  3. Disparate effects of interferon-gamma and tumor necrosis factor-alpha on early neutrophil respiratory burst and fungicidal responses to Candida albicans hyphae in vitro.

    PubMed Central

    Diamond, R D; Lyman, C A; Wysong, D R

    1991-01-01

    We examined effects of priming with recombinant human interferon-gamma (IFN) or tumor necrosis factor-alpha (TNF) on neutrophil responses to Candida albicans hyphae. Both cytokines increased early superoxide generation after hyphal stimulation. The more pronounced effects of TNF were accompanied by an augmented surface membrane depolarization rate and were insensitive to both pertussis toxin and calcium ion chelation, but were negated by concomitant incubation with puromycin or cycloheximide during priming. IFN augmented hyphal killing despite its only minor enhancement of early respiratory burst responses, but TNF reduced neutrophil fungicidal activity to nearly 40% below those by unprimed control cells even though it enhanced early superoxide responses more dramatically. Though TNF-primed neutrophils killed hyphae at normal initial rates, IFN-primed or even unprimed cells manifested more fungicidal sustained activity. These disparate consequences of cytokine priming on hyphal destruction were paralleled by differences in late generation of potentially candidacidal oxidants, hydrogen peroxide, and hypochlorous acid. IFN added during priming failed to correct TNF-associated functional defects in neutrophil anti-Candida responses. Thus, augmentation of early respiratory burst responses to oxidant-sensitive organisms need not necessarily reflect concomitant salutary effects on microbicidal activity. Images PMID:1846880

  4. Aerial videotape mapping of coastal geomorphic changes

    USGS Publications Warehouse

    Debusschere, Karolien; Penland, Shea; Westphal, Karen A.; Reimer, P. Douglas; McBride, Randolph A.

    1991-01-01

    An aerial geomorphic mapping system was developed to examine the spatial and temporal variability in the coastal geomorphology of Louisiana. Between 1984 and 1990 eleven sequential annual and post-hurricane aerial videotape surveys were flown covering periods of prolonged fair weather, hurricane impacts and subsequent post-storm recoveries. A coastal geomorphic classification system was developed to map the spatial and temporal geomorphic changes between these surveys. The classification system is based on 10 years of shoreline monitoring, analysis of aerial photography for 1940-1989, and numerous field surveys. The classification system divides shorelines into two broad classes: natural and altered. Each class consists of several genetically linked categories of shorelines. Each category is further subdivided into morphologic types on the basis of landform relief, elevation, habitat type, vegetation density and type, and sediment characteristics. The classification is used with imagery from the low-altitude, high-resolution aerial videotape surveys to describe and quantify the longshore and cross-shore geomorphic, sedimentologic, and vegetative character of Louisiana's shoreline systems. The mapping system makes it possible to delineate and map detailed geomorphic habitat changes at a resolution higher than that of conventional vertical aerial photography. Morphologic units are mapped parallel to the regional shoreline from the aerial videotape imagery onto the base maps at a scale of 1:24,000. The base maps were constructed from vertical aerial photography concurrent with the data of the video imagery.

  5. Response Regulator Heterodimer Formation Controls a Key Stage in Streptomyces Development

    PubMed Central

    Al-Bassam, Mahmoud M.; Bibb, Maureen J.; Bush, Matthew J.; Chandra, Govind; Buttner, Mark J.

    2014-01-01

    The orphan, atypical response regulators BldM and WhiI each play critical roles in Streptomyces differentiation. BldM is required for the formation of aerial hyphae, and WhiI is required for the differentiation of these reproductive structures into mature spores. To gain insight into BldM function, we defined the genome-wide BldM regulon using ChIP-Seq and transcriptional profiling. BldM target genes clustered into two groups based on their whi gene dependency. Expression of Group I genes depended on bldM but was independent of all the whi genes, and biochemical experiments showed that Group I promoters were controlled by a BldM homodimer. In contrast, Group II genes were expressed later than Group I genes and their expression depended not only on bldM but also on whiI and whiG (encoding the sigma factor that activates whiI). Additional ChIP-Seq analysis showed that BldM Group II genes were also direct targets of WhiI and that in vivo binding of WhiI to these promoters depended on BldM and vice versa. We go on to demonstrate that BldM and WhiI form a functional heterodimer that controls Group II promoters, serving to integrate signals from two distinct developmental pathways. The BldM-WhiI system thus exemplifies the potential of response regulator heterodimer formation as a mechanism to expand the signaling capabilities of bacterial cells. PMID:25101778

  6. Aerial Terrain Mapping Using Unmanned Aerial Vehicle Approach

    NASA Astrophysics Data System (ADS)

    Tahar, K. N.

    2012-08-01

    This paper looks into the latest achievement in the low-cost Unmanned Aerial Vehicle (UAV) technology in their capacity to map the semi-development areas. The objectives of this study are to establish a new methodology or a new algorithm in image registration during interior orientation process and to determine the accuracy of the photogrammetric products by using UAV images. Recently, UAV technology has been used in several applications such as mapping, agriculture and surveillance. The aim of this study is to scrutinize the usage of UAV to map the semi-development areas. The performance of the low cost UAV mapping study was established on a study area with two image processing methods so that the results could be comparable. A non-metric camera was attached at the bottom of UAV and it was used to capture images at both sites after it went through several calibration steps. Calibration processes were carried out to determine focal length, principal distance, radial lens distortion, tangential lens distortion and affinity. A new method in image registration for a non-metric camera is discussed in this paper as a part of new methodology of this study. This method used the UAV Global Positioning System (GPS) onboard to register the UAV image for interior orientation process. Check points were established randomly at both sites using rapid static Global Positioning System. Ground control points are used for exterior orientation process, and check point is used for accuracy assessment of photogrammetric product. All acquired images were processed in a photogrammetric software. Two methods of image registration were applied in this study, namely, GPS onboard registration and ground control point registration. Both registrations were processed by using photogrammetric software and the result is discussed. Two results were produced in this study, which are the digital orthophoto and the digital terrain model. These results were analyzed by using the root mean square

  7. Draper Laboratory small autonomous aerial vehicle

    NASA Astrophysics Data System (ADS)

    DeBitetto, Paul A.; Johnson, Eric N.; Bosse, Michael C.; Trott, Christian A.

    1997-06-01

    The Charles Stark Draper Laboratory, Inc. and students from Massachusetts Institute of Technology and Boston University have cooperated to develop an autonomous aerial vehicle that won the 1996 International Aerial Robotics Competition. This paper describes the approach, system architecture and subsystem designs for the entry. This entry represents a combination of many technology areas: navigation, guidance, control, vision processing, human factors, packaging, power, real-time software, and others. The aerial vehicle, an autonomous helicopter, performs navigation and control functions using multiple sensors: differential GPS, inertial measurement unit, sonar altimeter, and a flux compass. The aerial transmits video imagery to the ground. A ground based vision processor converts the image data into target position and classification estimates. The system was designed, built, and flown in less than one year and has provided many lessons about autonomous vehicle systems, several of which are discussed. In an appendix, our current research in augmenting the navigation system with vision- based estimates is presented.

  8. Officials: Aerial Spraying Working Against Miami Mosquitoes

    MedlinePlus

    ... Officials: Aerial Spraying Working Against Miami Mosquitoes The insects are to blame for first cases of Zika ... mosquitoes in a part of Miami where the insects have been linked to 16 cases of Zika ...

  9. Rangeland monitoring with unmanned aerial vehicles (UAVs)

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Unmanned aerial vehicles (UAVs) have great potential for rangeland management applications, such as monitoring vegetation change, developing grazing strategies, determining rangeland health, and assessing remediation treatment effectiveness. UAVs have several advantages: they can be deployed quickly...

  10. Locating buildings in aerial photos

    NASA Technical Reports Server (NTRS)

    Green, James S.

    1994-01-01

    Algorithms and techniques for use in the identification and location of large buildings in digitized copies of aerial photographs are developed and tested. The building data would be used in the simulation of objects located in the vicinity of an airport that may be detected by aircraft radar. Two distinct approaches are considered. Most building footprints are rectangular in form. The first approach studied is to search for right-angled corners that characterize rectangular objects and then to connect these corners to complete the building. This problem is difficult because many nonbuilding objects, such as street corners, parking lots, and ballparks often have well defined corners which are often difficult to distinguish from rooftops. Furthermore, rooftops come in a number of shapes, sizes, shadings, and textures which also limit the discrimination task. The strategy used linear sequences of different samples to detect straight edge segments at multiple angles and to determine when these segments meet at approximately right-angles with respect to each other. This technique is effective in locating corners. The test image used has a fairly rectangular block pattern oriented about thirty degrees clockwise from a vertical alignment, and the overall measurement data reflect this. However, this technique does not discriminate between buildings and other objects at an operationally suitable rate. In addition, since multiple paths are tested for each image pixel, this is a time consuming task. The process can be speeded up by preprocessing the image to locate the more optimal sampling paths. The second approach is to rely on a human operator to identify and select the building objects and then to have the computer determine the outline and location of the selected structures. When presented with a copy of a digitized aerial photograph, the operator uses a mouse and cursor to select a target building. After a button on the mouse is pressed, with the cursor fully within

  11. Reliable aerial thermography for energy conservation

    NASA Technical Reports Server (NTRS)

    Jack, J. R.; Bowman, R. L.

    1981-01-01

    A method for energy conservation, the aerial thermography survey, is discussed. It locates sources of energy losses and wasteful energy management practices. An operational map is presented for clear sky conditions. The map outlines the key environmental conditions conductive to obtaining reliable aerial thermography. The map is developed from defined visual and heat loss discrimination criteria which are quantized based on flat roof heat transfer calculations.

  12. Aerial righting reflexes in flightless animals.

    PubMed

    Jusufi, Ardian; Zeng, Yu; Full, Robert J; Dudley, Robert

    2011-12-01

    Animals that fall upside down typically engage in an aerial righting response so as to reorient dorsoventrally. This behavior can be preparatory to gliding or other controlled aerial behaviors and is ultimately necessary for a successful landing. Aerial righting reflexes have been described historically in various mammals such as cats, guinea pigs, rabbits, rats, and primates. The mechanisms whereby such righting can be accomplished depend on the size of the animal and on anatomical features associated with motion of the limbs and body. Here we apply a comparative approach to the study of aerial righting to explore the diverse strategies used for reorientation in midair. We discuss data for two species of lizards, the gecko Hemidactylus platyurus and the anole Anolis carolinensis, as well as for the first instar of the stick insect Extatosoma tiaratum, to illustrate size-dependence of this phenomenon and its relevance to subsequent aerial performance in parachuting and gliding animals. Geckos can use rotation of their large tails to reorient their bodies via conservation of angular momentum. Lizards with tails well exceeding snout-vent length, and correspondingly large tail inertia to body inertia ratios, are more effective at creating midair reorientation maneuvers. Moreover, experiments with stick insects, weighing an order of magnitude less than the lizards, suggest that aerodynamic torques acting on the limbs and body may play a dominant role in the righting process for small invertebrates. Both inertial and aerodynamic effects, therefore, can play a role in the control of aerial righting. We propose that aerial righting reflexes are widespread among arboreal vertebrates and arthropods and that they represent an important initial adaptation in the evolution of controlled aerial behavior. PMID:21930662

  13. Inhibition of Candida albicans biofilm formation and modulation of gene expression by probiotic cells and supernatant.

    PubMed

    James, K M; MacDonald, K W; Chanyi, R M; Cadieux, P A; Burton, J P

    2016-04-01

    Oral candidiasis is a disease caused by opportunistic species of Candida that normally reside on human mucosal surfaces. The transition of Candida from budding yeast to filamentous hyphae allows for covalent attachment to oral epithelial cells, followed by biofilm formation, invasion and tissue damage. In this study, combinations of Lactobacillus plantarum SD5870, Lactobacillus helveticus CBS N116411 and Streptococcus salivarius DSM 14685 were assessed for their ability to inhibit the formation of and disrupt Candida albicans biofilms. Co-incubation with probiotic supernatants under hyphae-inducing conditions reduced C. albicans biofilm formation by >75 % in all treatment groups. Likewise, combinations of live probiotics reduced biofilm formation of C. albicans by >67 %. When live probiotics or their supernatants were overlaid on preformed C. albicans biofilms, biofilm size was reduced by >63 and >65 % respectively. Quantitative real-time PCR results indicated that the combined supernatants of SD5870 and CBS N116411 significantly reduced the expression of several C. albicans genes involved in the yeast-hyphae transition: ALS3 (adhesin/invasin) by 70 % (P < 0.0001), EFG1 (hyphae-specific gene activator) by 47 % (P = 0.0061), SAP5 (secreted protease) by 49 % (P < 0.0001) and HWP1 (hyphal wall protein critical to biofilm formation) by >99 % (P < 0.0001). These findings suggest the combination of L. plantarum SD5870, L. helveticus CBS N116411 and S. salivarius DSM 14685 is effective at both preventing the formation of and removing preformed C. albicans biofilms. Our novel results point to the downregulation of several Candida genes critical to the yeast-hyphae transition, biofilm formation, tissue invasion and cellular damage. PMID:26847045

  14. Endurance bounds of aerial systems

    NASA Astrophysics Data System (ADS)

    Harrington, Aaron M.; Kroninger, Christopher M.

    2014-06-01

    Within the past few years micro aerial vehicles (MAVs) have received much more attention and are starting to proliferate into military as well as civilian roles. However, one of the major drawbacks for this technology currently, has been their poor endurance, usually below 10 minutes. This is a direct result of the inefficiencies inherent in their design. Often times, designers do not consider the various components in the vehicle design and match their performance to the desired mission for the vehicle. These vehicles lack a prescribed set of design guidelines or empirically derived design equations which often limits their design to selection of commercial off-the-shelf components without proper consideration of their affect on vehicle performance. In the current study, the design space for different vehicle configurations has been examined including insect flapping, avian flapping, rotary wing, and fixed wing, and their performance bounds are established. The propulsion system typical of a rotary wing vehicle is analyzed to establish current baselines for efficiency of vehicles at this scale. The power draw from communications is analyzed to determine its impact on vehicle performance. Finally, a representative fixed wing MAV is examined and the effects of adaptive structures as a means for increasing vehicle endurance and range are examined. This paper seeks to establish the performance bounds for micro air vehicles and establish a path forward for future designs so that efficiency may be maximized.

  15. Aerial photo SBVC1962". Photo no. 360. Low oblique aerial view ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Aerial photo -SBVC-1962". Photo no. 360. Low oblique aerial view of the campus, looking southeast. Stamped on the rear: "Ron Wilhite, Sun-Telegram photo, file, 10/22/62/ - San Bernardino Valley College, 701 South Mount Vernon Avenue, San Bernardino, San Bernardino County, CA

  16. Aerial imaging study of the mask-induced line-width roughness of EUV lithography masks

    NASA Astrophysics Data System (ADS)

    Wojdyla, Antoine; Donoghue, Alexander; Benk, Markus P.; Naulleau, Patrick P.; Goldberg, Kenneth A.

    2016-03-01

    EUV lithography uses reflective photomasks to print features on a wafer through the formation of an aerial image. The aerial image is influenced by the mask's substrate and pattern roughness and by photon shot noise, which collectively affect the line-width on wafer prints, with an impact on local critical dimension uniformity (LCDU). We have used SHARP, an actinic mask-imaging microscope, to study line-width roughness (LWR) in aerial images at sub-nanometer resolution. We studied the impact of photon density and the illumination partial coherence on recorded images, and found that at low coherence settings, the line-width roughness is dominated by photon noise, while at high coherence setting, the effect of speckle becomes more prominent, dominating photon noise for exposure levels of 4 photons/nm2 at threshold on the mask size.

  17. Aerial radiation survey at a military range.

    SciTech Connect

    Williams, G. P.; Martino, L. E.; Wrobel, J.; Environmental Assessment; U.S. Army Aberdeen Proving Ground

    2001-04-01

    Aberdeen Proving Ground (APG) is currently listed on the Superfund National Priorities List because of past waste handling practices at 13 'study areas.' Concern has been expressed that anthropogenic radioisotopes may have been released at some of the study areas, with the potential of posing health risks to human or ecological receptors. This concern was addressed by thoroughly searching archival records, sampling and analyzing environmental media, and performing an aerial radiation survey. The aerial radiation survey techniques employed have been used over all U.S. Department of Energy and commercial reactor sites. Use of the Aerial Measurement System (AMS) allowed investigators to safely survey areas where surveys using hand-held instruments would be difficult to perform. In addition, the AMS delivered a full spectrum of the measured gamma radiation, thereby providing a means of determining which radioisotopes were present at the surface. As a quality check on the aerial measurements, four ground truth measurements were made at selected locations and compared with the aerial data for the same locations. The results of the survey revealed no evidence of surface radioactive contamination. The measured background radiation, including the cosmic contribution, ranged from 4 to 11 {mu}R/h.

  18. The Development and Flight Testing of an Aerially Deployed Unmanned Aerial System

    NASA Astrophysics Data System (ADS)

    Smith, Andrew

    An investigation into the feasibility of aerial deployed unmanned aerial vehicles was completed. The investigation included the development and flight testing of multiple unmanned aerial systems to investigate the different components of potential aerial deployment missions. The project consisted of two main objectives; the first objective dealt with the development of an airframe capable of surviving aerial deployment from a rocket and then self assembling from its stowed configuration into its flight configuration. The second objective focused on the development of an autopilot capable of performing basic guidance, navigation, and control following aerial deployment. To accomplish these two objectives multiple airframes were developed to verify their completion experimentally. The first portion of the project, investigating the feasibility of surviving an aerial deployment, was completed using a fixed wing glider that following a successful deployment had 52 seconds of controlled flight. Before developing the autopilot in the second phase of the project, the glider was significantly upgraded to fix faults discovered in the glider flight testing and to enhance the system capabilities. Unfortunately to conform to outdoor flight restrictions imposed by the university and the Federal Aviation Administration it was required to switch airframes before flight testing of the new fixed wing platform could begin. As a result, an autopilot was developed for a quadrotor and verified experimentally completely indoors to remain within the limits of governing policies.

  19. Ground cover estimated from aerial photographs

    NASA Technical Reports Server (NTRS)

    Gerbermann, A. H.; Cuellar, J. A.; Wiegand, C. L.

    1976-01-01

    Estimates of per cent ground cover made by ground observers were compared with independent estimates made on the basis of low-altitude (640-1219 m) aerial photographs of the same fields. Standard statistical simple correlation and linear regression analyses revealed a high correlation between the two estimation methods. In crops such as grain, sorghum, corn, and forage sorghum, in which the broadest part of the leaf canopy is near the top of the plant, there was a tendency to overestimate the per cent ground cover from aerial photographs.

  20. Noise from aerial bursts of fireworks

    NASA Technical Reports Server (NTRS)

    Maglieri, D. J.; Henderson, H. R.

    1973-01-01

    A study was made recording the pressure time histories of the aerial bursts of mortars of various sizes launched during an actual fireworks display. The peak overpressure and duration of blast noise as well as the energy spectral density are compared with the characteristics of a blasting cap and of an F-104 aircraft at a Mach number of 1.4 and an altitude of 42,000 ft. Noise levels of the fireworks aerial bursts peaked 15 decibels below levels deemed damaging to hearing.

  1. Advanced Image Processing of Aerial Imagery

    NASA Technical Reports Server (NTRS)

    Woodell, Glenn; Jobson, Daniel J.; Rahman, Zia-ur; Hines, Glenn

    2006-01-01

    Aerial imagery of the Earth is an invaluable tool for the assessment of ground features, especially during times of disaster. Researchers at the NASA Langley Research Center have developed techniques which have proven to be useful for such imagery. Aerial imagery from various sources, including Langley's Boeing 757 Aries aircraft, has been studied extensively. This paper discusses these studies and demonstrates that better-than-observer imagery can be obtained even when visibility is severely compromised. A real-time, multi-spectral experimental system will be described and numerous examples will be shown.

  2. MicroProbe Small Unmanned Aerial System

    NASA Technical Reports Server (NTRS)

    Bland, Geoffrey; Miles, Ted

    2012-01-01

    The MicroProbe unmanned aerial system (UAS) concept incorporates twin electric motors mounted on the vehicle wing, thus enabling an aerodynamically and environmentally clean nose area for atmospheric sensors. A payload bay is also incorporated in the fuselage to accommodate remote sensing instruments. A key feature of this concept is lightweight construction combined with low flying speeds to minimize kinetic energy and associated hazards, as well as maximizing spatial resolution. This type of aerial platform is needed for Earth science research and environmental monitoring. There were no vehicles of this type known to exist previously.

  3. Metrically preserving the USGS aerial film archive

    USGS Publications Warehouse

    Moe, Donald; Longhenry, Ryan

    2013-01-01

    Since 1972, the U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Center in Sioux Falls, South Dakota, has provided fi lm-based products to the public. EROS is home to an archive of 12 million frames of analog photography ranging from 1937 to the present. The archive contains collections from both aerial and satellite platforms including programs such as the National High Altitude Program (NHAP), National Aerial Photography Program (NAPP), U.S. Antarctic Resource Center (USARC), Declass 1(CORONA, ARGON, and LANYARD), Declass 2 (KH-7 and KH-9), and Landsat (1972 – 1992, Landsat 1–5).

  4. Laser Doppler velocimeter aerial spray measurements

    NASA Technical Reports Server (NTRS)

    Zalay, A. D.; Eberle, W. R.; Howle, R. E.; Shrider, K. R.

    1978-01-01

    An experimental research program for measuring the location, spatial extent, and relative concentration of airborne spray clouds generated by agricultural aircraft is described. The measurements were conducted with a ground-based laser Doppler velocimeter. The remote sensing instrumentation, experimental tests, and the results of the flight tests are discussed. The cross section of the aerial spray cloud and the observed location, extent, and relative concentration of the airborne particulates are presented. It is feasible to use a mobile laser Doppler velocimeter to track and monitor the transport and dispersion of aerial spray generated by an agricultural aircraft.

  5. AERIAL OF VISITORS INFORMATION CENTER [VIC] & ROCKET GARDEN

    NASA Technical Reports Server (NTRS)

    1973-01-01

    AERIAL OF VISITORS INFORMATION CENTER [VIC] & ROCKET GARDEN KSC-373C-0556.20 116-KSC-373C-556.20, P-01622-B, ARCHIVE-04455 Aerial view of Easter crowds at Visitors Information Center, Kennedy Space Center, Florida.

  6. Unmanned Aerial Systems and Spectroscopy for Remote Sensing Applications in Archaeology

    NASA Astrophysics Data System (ADS)

    Themistocleous, K.; Agapiou, A.; Cuca, B.; Hadjimitsis, D. G.

    2015-04-01

    Remote sensing has open up new dimensions in archaeological research. Although there has been significant progress in increasing the resolution of space/aerial sensors and image processing, the detection of the crop (and soil marks) formations, which relate to buried archaeological remains, are difficult to detect since these marks may not be visible in the images if observed over different period or at different spatial/spectral resolution. In order to support the improvement of earth observation remote sensing technologies specifically targeting archaeological research, a better understanding of the crop/soil marks formation needs to be studied in detail. In this paper the contribution of both Unmanned Aerial Systems as well ground spectroradiometers is discussed in a variety of examples applied in the eastern Mediterranean region (Cyprus and Greece) as well in Central Europe (Hungary). In- situ spectroradiometric campaigns can be applied for the removal of atmospheric impact to simultaneous satellite overpass images. In addition, as shown in this paper, the systematic collection of ground truth data prior to the satellite/aerial acquisition can be used to detect the optimum temporal and spectral resolution for the detection of stress vegetation related to buried archaeological remains. Moreover, phenological studies of the crops from the area of interest can be simulated to the potential sensors based on their Relative Response Filters and therefore prepare better the satellite-aerial campaigns. Ground data and the use of Unmanned Aerial Systems (UAS) can provide an increased insight for studying the formation of crop and soil marks. New algorithms such as vegetation indices and linear orthogonal equations for the enhancement of crop marks can be developed based on the specific spectral characteristics of the area. As well, UAS can be used for remote sensing applications in order to document, survey and model cultural heritage and archaeological sites.

  7. 7 CFR 1755.507 - Aerial cable services.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... § 1755.507 Aerial cable services. (a) Where more than six pairs are needed initially, and where an aerial service is necessary, the service shall consist of 22 AWG filled aerial cable of a pair size adequate for... from the building, the wall bracket shall be reinforced against pullout by an arrangement equivalent...

  8. 7 CFR 1755.507 - Aerial cable services.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... § 1755.507 Aerial cable services. (a) Where more than six pairs are needed initially, and where an aerial service is necessary, the service shall consist of 22 AWG filled aerial cable of a pair size adequate for... from the building, the wall bracket shall be reinforced against pullout by an arrangement equivalent...

  9. 7 CFR 1755.507 - Aerial cable services.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... § 1755.507 Aerial cable services. (a) Where more than six pairs are needed initially, and where an aerial service is necessary, the service shall consist of 22 AWG filled aerial cable of a pair size adequate for... from the building, the wall bracket shall be reinforced against pullout by an arrangement equivalent...

  10. 47 CFR 32.6421 - Aerial cable expense.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Aerial cable expense. 32.6421 Section 32.6421... FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6421 Aerial cable expense. (a) This account shall include expenses associated with aerial cable. (b) Subsidiary record...

  11. 47 CFR 32.6421 - Aerial cable expense.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 2 2013-10-01 2013-10-01 false Aerial cable expense. 32.6421 Section 32.6421... FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6421 Aerial cable expense. (a) This account shall include expenses associated with aerial cable. (b) Subsidiary record...

  12. 47 CFR 32.6421 - Aerial cable expense.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 2 2012-10-01 2012-10-01 false Aerial cable expense. 32.6421 Section 32.6421... FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6421 Aerial cable expense. (a) This account shall include expenses associated with aerial cable. (b) Subsidiary record...

  13. 47 CFR 32.6421 - Aerial cable expense.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 2 2011-10-01 2011-10-01 false Aerial cable expense. 32.6421 Section 32.6421... FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6421 Aerial cable expense. (a) This account shall include expenses associated with aerial cable. (b) Subsidiary record...

  14. Geography via Aerial Field Trips: Do It This Way, 6.

    ERIC Educational Resources Information Center

    Richason, Benjamin F., Jr.; Guell, Carl E.

    To provide guidance for geography teachers, this booklet presents information on how to plan and execute aerial field trips. The aerial field trip can be employed as an effective visual aid technique in the teaching of geography, especially for presenting earth generalizations and interrelationships. The benefits of an aerial field trip are…

  15. Aerial Infrared Photos for Citrus Growers

    NASA Technical Reports Server (NTRS)

    Blazquez, C. H.; Horn, F. W. J.

    1982-01-01

    Handbook advises on benefits and methods of aerial photography with color infrared film. Interpretation of photographs is discussed in detail. Necessary equipment for interpretation is described--light table, magnifying lenses, and microfiche viewers, for example. Advice is given on rating tree condition; identifying effects of diseases, insects, and nematodes; and evaluating effects of soil, water, and weather.

  16. "A" Is for Aerial Maps and Art

    ERIC Educational Resources Information Center

    Todd, Reese H.; Delahunty, Tina

    2007-01-01

    The technology of satellite imagery and remote sensing adds a new dimension to teaching and learning about maps with elementary school children. Just a click of the mouse brings into view some images of the world that could only be imagined a generation ago. Close-up aerial pictures of the school and neighborhood quickly catch the interest of…

  17. 29 CFR 1926.453 - Aerial lifts.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies may be obtained from the American National...) Vertical towers; and (v) A combination of any such devices. Aerial equipment may be made of metal, wood... on the edge of the basket or use planks, ladders, or other devices for a work position. (v) A...

  18. 29 CFR 1926.453 - Aerial lifts.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies may be obtained from the American National...) Vertical towers; and (v) A combination of any such devices. Aerial equipment may be made of metal, wood... on the edge of the basket or use planks, ladders, or other devices for a work position. (v) A...

  19. 29 CFR 1926.453 - Aerial lifts.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies may be obtained from the American National...) Vertical towers; and (v) A combination of any such devices. Aerial equipment may be made of metal, wood... on the edge of the basket or use planks, ladders, or other devices for a work position. (v) A...

  20. Using Unmanned Aerial Vehicles and GPS Receivers

    NASA Technical Reports Server (NTRS)

    Gary, B.

    1995-01-01

    It is proposed that a small fleet of unmanned aerial vehicles (UAVs) be used over a period of years to monitor the rise of pressure surfaces caused by the hypothesized rise in average temperature of the troposphere due to global warming. Global Positioning Satellite System (GPS) receivers would be used for the precise tracking required.

  1. Sea Ice Mapping using Unmanned Aerial Systems

    NASA Astrophysics Data System (ADS)

    Solbø, S.; Storvold, R.

    2011-12-01

    Mapping of sea ice extent and sea ice features is an important task in climate research. Since the arctic coastal and oceanic areas have a high probability of cloud coverage, aerial platforms are superior to satellite measurements for high-resolution optical measurements. However, routine observations of sea ice conditions present a variety of problems using conventional piloted aircrafts. Specially, the availability of suitable aircrafts for lease does not cover the demand in major parts of the arctic. With the recent advances in unmanned aerial systems (UAS), there is a high possibility of establishing routine, cost effective aerial observations of sea ice conditions in the near future. Unmanned aerial systems can carry a wide variety of sensors useful for characterizing sea-ice features. For instance, the CryoWing UAS, a system initially designed for measurements of the cryosphere, can be equipped with digital cameras, surface thermometers and laser altimeters for measuring freeboard of ice flows. In this work we will present results from recent CryoWing sea ice flights on Svalbard, Norway. The emphasis will be on data processing for stitching together images acquired with the non-stabilized camera payload, to form high-resolution mosaics covering large spatial areas. These data are being employed to map ice conditions; including ice and lead features and melt ponds. These high-resolution mosaics are also well suited for sea-ice mechanics, classification studies and for validation of satellite sea-ice products.

  2. ENVIRONMENTAL APPLICATION OF LOW ALTITUDE AERIAL PHOTOGRAPHY

    EPA Science Inventory

    The most practical avenue for development of these goals is to continue to use the LAAPS system at field sites that require aerial imaging. For the sake of convenience, I believe that the local field sites can provide a convenient location to develop new applications and test enh...

  3. Aerial Scene Recognition using Efficient Sparse Representation

    SciTech Connect

    Cheriyadat, Anil M

    2012-01-01

    Advanced scene recognition systems for processing large volumes of high-resolution aerial image data are in great demand today. However, automated scene recognition remains a challenging problem. Efficient encoding and representation of spatial and structural patterns in the imagery are key in developing automated scene recognition algorithms. We describe an image representation approach that uses simple and computationally efficient sparse code computation to generate accurate features capable of producing excellent classification performance using linear SVM kernels. Our method exploits unlabeled low-level image feature measurements to learn a set of basis vectors. We project the low-level features onto the basis vectors and use simple soft threshold activation function to derive the sparse features. The proposed technique generates sparse features at a significantly lower computational cost than other methods~\\cite{Yang10, newsam11}, yet it produces comparable or better classification accuracy. We apply our technique to high-resolution aerial image datasets to quantify the aerial scene classification performance. We demonstrate that the dense feature extraction and representation methods are highly effective for automatic large-facility detection on wide area high-resolution aerial imagery.

  4. A TOOL FOR PLANNING AERIAL PHOTOGRAPHY

    EPA Science Inventory

    abstract The U.S. EPAs Pacific Coastal Ecology Branch has developed a tool in the form of an Excel. spreadsheet that facilitates planning aerial photography missions. The spreadsheet accepts various input parameters such as desired photo-scale and boundary coordinates of the stud...

  5. The Art and Science of Aerial Perspective

    ERIC Educational Resources Information Center

    Kegel, Susan

    2006-01-01

    The author is always looking for ways to see connections and to adapt experiences across different subjects. Combining art with other disciplines helps keep students engaged, even the really analytical and verbal learners. Aerial perspective is an art technique, a scientific principle, and a vehicle for introducing Chinese painting and…

  6. Calculating aerial images from EUV masks

    NASA Astrophysics Data System (ADS)

    Pistor, Thomas V.; Neureuther, Andrew R.

    1999-06-01

    Aerial images for line/space patterns, arrays of posts and an arbitrary layout pattern are calculated for EUV masks in a 4X EUV imaging system. Both mask parameters and illumination parameters are varied to investigate their effects on the aerial image. To facilitate this study, a parallel version of TEMPEST with a Fourier transform boundary condition was developed and run on a network of 24 microprocessors. Line width variations are observed when absorber thickness or sidewall angle changes. As the line/space pattern scales to smaller dimensions, the aspect ratios of the absorber features increase, introducing geometric shadowing and reducing aerial image intensity and contrast. 100nm square posts have circular images of diameter close to 100nm, but decreasing in diameter significantly when the corner round radius at the mask becomes greater than 50 nm. Exterior mask posts image slightly smaller and with higher ellipticity than interior mask posts. The aerial image of the arbitrary test pattern gives insight into the effects of the off-axis incidence employed in EUV lithography systems.

  7. Low Cost Surveying Using AN Unmanned Aerial Vehicle

    NASA Astrophysics Data System (ADS)

    Pérez, M.; Agüera, F.; Carvajal, F.

    2013-08-01

    Traditional manned airborne surveys are usually expensive and the resolution of the acquired images is often limited. The main advantage of Unmanned Aerial Vehicle (UAV) system acting as a photogrammetric sensor platform over more traditional manned airborne system is the high flexibility that allows image acquisition from unconventional viewpoints, the low cost in comparison with classical aerial photogrammetry and the high resolution images obtained. Nowadays there is a necessity for surveying small areas and in these cases, it is not economical the use of normal large format aerial or metric cameras to acquire aerial photos, therefore, the use of UAV platforms can be very suitable. Also the large availability of digital cameras has strongly enhanced the capabilities of UAVs. The use of digital non metric cameras together with the UAV could be used for multiple applications such as aerial surveys, GIS, wildfire mapping, stability of landslides, crop monitoring, etc. The aim of this work was to develop a low cost and accurate methodology in the production of orthophotos and Digital Elevation Models (DEM). The study was conducted in the province of Almeria, south of Spain. The photogrammetric flight had an altitude of 50 m over ground, covering an area of 5.000 m2 approximately. The UAV used in this work was the md4-200, which is an electronic battery powered quadrocopter UAV developed by Microdrones GmbH, Germany. It had on-board a Pextax Optio A40 digital non metric camera with 12 Megapixels. It features a 3x optical zoom lens with a focal range covering angles of view equivalent to those of 37-111 mm lens in 35 mm format. The quadrocopter can be programmed to follow a route defined by several waypoints and actions and it has the ability for vertical take off and landing. Proper flight geometry during image acquisition is essential in order to minimize the number of photographs, avoid areas without a good coverage and make the overlaps homogeneous. The flight

  8. Object and activity detection from aerial video

    NASA Astrophysics Data System (ADS)

    Se, Stephen; Shi, Feng; Liu, Xin; Ghazel, Mohsen

    2015-05-01

    Aerial video surveillance has advanced significantly in recent years, as inexpensive high-quality video cameras and airborne platforms are becoming more readily available. Video has become an indispensable part of military operations and is now becoming increasingly valuable in the civil and paramilitary sectors. Such surveillance capabilities are useful for battlefield intelligence and reconnaissance as well as monitoring major events, border control and critical infrastructure. However, monitoring this growing flood of video data requires significant effort from increasingly large numbers of video analysts. We have developed a suite of aerial video exploitation tools that can alleviate mundane monitoring from the analysts, by detecting and alerting objects and activities that require analysts' attention. These tools can be used for both tactical applications and post-mission analytics so that the video data can be exploited more efficiently and timely. A feature-based approach and a pixel-based approach have been developed for Video Moving Target Indicator (VMTI) to detect moving objects at real-time in aerial video. Such moving objects can then be classified by a person detector algorithm which was trained with representative aerial data. We have also developed an activity detection tool that can detect activities of interests in aerial video, such as person-vehicle interaction. We have implemented a flexible framework so that new processing modules can be added easily. The Graphical User Interface (GUI) allows the user to configure the processing pipeline at run-time to evaluate different algorithms and parameters. Promising experimental results have been obtained using these tools and an evaluation has been carried out to characterize their performance.

  9. Application of solid state lighting in aerial refueling operations

    NASA Astrophysics Data System (ADS)

    Mangum, Scott; Singer, Jeffrey; Walker, Richard; Ferguson, Joseph; Kemp, Richard

    2005-09-01

    Operating at altitude and often in turbulent, low visibility conditions, in-flight refueling of aircraft is a challenging endeavor, even for seasoned aviators. The receiving aircraft must approach a large airborne tanker; take position within a "reception window" beneath and/or behind the tanker and, dependent upon the type of receiving aircraft, mate with an extended refueling boom or hose and drogue. Light is used to assist in the approach, alignment and refuel process of the aircraft. Robust solid state light emitting diodes (LEDs) are an appropriate choice for use in the challenging environments that these aircraft operate within. This paper examines how LEDs are incorporated into several unique lighting applications associated with such aerial refueling operations. We will discuss the design requirements, both environmental and photometric that defined the selection of different LED packages for use in state-of-the-art airborne refueling aircraft Formation Lights, Hose Drum/Drogue Unit lights and Pilot Director Lights.

  10. Aerial detection of leaf senescence for a geobotanical study

    NASA Technical Reports Server (NTRS)

    Schwaller, M.; Tkach, S. J.

    1986-01-01

    A geobotanical investigation based on the detection of premature leaf senescence was conducted in an area of predominantly chalcocite mineralization of the Keweenaw Peninsula in Michigan's Upper Peninsula. Spectrophotometric measurements indicated that the region from 600 to 700 nm captures the rise in red reflectance characteristic of senescent leaves. Observations at other wavelengths do not distinguish between senescent and green leaves as clearly and unequivocably as observations at these wavelengths. Small format black and white aerial photographs filtered for the red band (600 to 700 nm) and Thematic Mapper Simulator imagery were collected during the period of fall senescence in the study area. Soil samples were collected from two areas identified by leaf senescence and from two additional sites where the leaf canopy was still green. Geochemical analysis revealed that the sites characterized by premature leaf senescence had a significantly higher median soil copper concentration than the other two areas.

  11. Purification of an Extracellular Signaling Molecule Involved in Production of Aerial Mycelium by Streptomyces coelicolor

    PubMed Central

    Nodwell, Justin R.; Losick, Richard

    1998-01-01

    We have extensively purified a factor from conditioned medium that restores aerial mycelium formation to a mutant of Streptomyces coelicolor that is defective in morphological differentiation. Response to this factor is shown to depend on the presence of the BldK oligopeptide import system. We suggest that this substance acts at the first step in a putative cascade of developmental regulatory signals. PMID:9495776

  12. Physiological adaptations of the intertidal rockpool teleost Blennius pholis L., to aerial exposure.

    PubMed

    Pelster, B; Bridges, C R; Grieshaber, M K

    1988-03-01

    Gas exchange, metabolism, ventilation, circulation and acid-base balance in water and air were investigated in Blennius pholis. The rates of gas exchange in water and air were similar with the RQ remaining around 0.8. Aerial gas exchange was equally divided between the head/gills and the tail region. Ventilatory adaptations involved a reduction in rate in air and the mode of ventilation changed from flow-through to tidal, with closed opercula. A transient bradycardia developed on transition to air before heart frequency (fH) returned to aquatic levels. During aerial exposure PvCO2 rose only by 1 Torr with a concomitant decrease in pH of 0.19 pH-units. At the same time a metabolic acidosis was observed which could not be fully accounted for by the formation of lactic acid in the blood, although tissue lactate levels did not change significantly. No histological evidence was found for the presence of carbonic anhydrase in the epithelial cells of the skin or the oesophagus to aid aerial CO2 excretion. Inhibition of CA activity by addition of methazolamide to blood, however, caused PvCO2 to rise by 3 Torr and pHv to decrease by 0.4 pH unit. It is concluded that B. pholis is physiologically well adapted to aerial exposure through adjustments in ventilation and circulation and that erythrocytic carbonic anhydrase plays a major role in CO2 transfer. PMID:3375606

  13. Aerial measurement of heat loss: Phase II

    SciTech Connect

    Not Available

    1982-07-01

    The purpose of the program described was to develop techniques to reduce or eliminate some of the variables associated with thermogram analysis in order to provide more objective interpretation of the data collected with greater potential for accuracy. A procedure is given for measuring temperature which accounts for atmospheric, background, and differential emissivity effects. The residual error was found to be 1.0/sup 0/C. A technique was then identified and developed for determining heat loss lovels from roof top surface temperature data. A thermal integrity factor was defined as a function of insulation level and thermostat setting. Comparing these thermal integrity factors with aerial thermography data indicates that aerial thermography can be used to objectively and confidently define heat loss levels from building roofs. (LEW)

  14. Aerial color infrared photography applications to citriculture

    NASA Technical Reports Server (NTRS)

    Blazquez, C. H.; Horn, F. W., Jr.

    1980-01-01

    Results of a one-year experimental study on the use of aerial color infrared photography in citrus grove management are presented. It is found that the spring season, when trees are in flush (have young leaves), is the best season to photograph visible differences between healthy and diseased trees. It is also shown that the best photography can be obtained with a 12-in. focal length lens. The photographic scale that allowed good photo interpretation with simple inexpensive equipment was 1 in. = 330 ft. The use of a window-overlay transparency method allowed rapid photo interpretation and data recording in computer-compatible forms. Aerial color infrared photography carried out during the spring season revealed a more accurate status of tree condition than visual inspection.

  15. Controller Design of Quadrotor Aerial Robot

    NASA Astrophysics Data System (ADS)

    Yali, Yu; SunFeng; Yuanxi, Wang

    This paper deduced the nonlinear dynamic model of a quadrotor aerial robot, which was a VTOL (vertical tale-off and landing) unmanned air vehicle. Since that is a complex model with the highly nonlinear multivariable strongly coupled and under-actuated property, the controller design of it was very difficult. Aimed at attaining the excellent controller, the whole system can be divided into three interconnected parts: attitude subsystem, vertical subsystem, position subsystem. Then nonlinear control strategy of them has been described, such as SDRE and Backstepping. The controller design was presented to stabilize the whole system. Through simulation result indicates, the various models have shown that the control law stabilize a quadrotor aerial robot with good tracking performance and robotness of the system.

  16. Ultralight photovoltaic modules for unmanned aerial vehicles

    SciTech Connect

    Nowlan, M.J.; Maglitta, J.C.; Darkazalli, G.; Lamp, T.

    1997-12-31

    New lightweight photovoltaic modules are being developed for powering high altitude unmanned aerial vehicles (UAVs). Modified low-cost terrestrial solar cell and module technologies are being applied to minimize vehicle cost. New processes were developed for assembling thin solar cells, encapsulant films, and cover films. An innovative by-pass diode mounting approach that uses a solar cell as a heat spreader was devised and tested. Materials and processes will be evaluated through accelerated environmental testing.

  17. Comparative Analysis of the Tour Jete and Aerial with Detailed Analysis of Aerial Takeoff Mechanics

    NASA Astrophysics Data System (ADS)

    Pierson, Mimi; Coplin, Kim

    2006-10-01

    Whether internally as muscle tension or from external sources, forces are necessary for all motion. This research focused on athletic rotations where conditions of flight are established during takeoff. By studying reaction forces that produce torques, moments of inertia, and linear and angular differences between distinct rotations around different principle axes of the body (tour jete in ballet - longitudinal axis; aerial in gymnastics - anteroposterior axis), and by looking at the values of angular momentum in the specific mechanics of aerial takeoff, we can gain insight into possible causes of injury, flaws in technique and limitations of athletes. Results showed significant differences in the horizontal and vertical components of takeoff between the tour jete and the aerial, and a realization that torque was produced in different biomechanical planes. Both rotations showed braking forces before takeoff to counteract forward momentum and increase vertical lift, but the angle of applied force varied, and the horizontal components of velocity and force and vertical velocity as well as moment of inertia throughout flight were consistently greater for the aerial. Breakdown of aerial takeoff highlighted the relative importance of the takeoff phases, showing that completion depends fundamentally upon the rotation of the rear foot and torso twisting during takeoff rather than the last foot in contact with the ground.

  18. Remotely deployable aerial inspection using tactile sensors

    NASA Astrophysics Data System (ADS)

    MacLeod, C. N.; Cao, J.; Pierce, S. G.; Sullivan, J. C.; Pipe, A. G.; Dobie, G.; Summan, R.

    2014-02-01

    For structural monitoring applications, the use of remotely deployable Non-Destructive Evaluation (NDE) inspection platforms offer many advantages, including improved accessibility, greater safety and reduced cost, when compared to traditional manual inspection techniques. The use of such platforms, previously reported by researchers at the University Strathclyde facilitates the potential for rapid scanning of large areas and volumes in hazardous locations. A common problem for both manual and remote deployment approaches lies in the intrinsic stand-off and surface coupling issues of typical NDE probes. The associated complications of these requirements are obviously significantly exacerbated when considering aerial based remote inspection and deployment, resulting in simple visual techniques being the preferred sensor payload. Researchers at Bristol Robotics Laboratory have developed biomimetic tactile sensors modelled on the facial whiskers (vibrissae) of animals such as rats and mice, with the latest sensors actively sweeping their tips across the surface in a back and forth motion. The current work reports on the design and performance of an aerial inspection platform and the suitability of tactile whisking sensors to aerial based surface monitoring applications.

  19. Localization of aerial broadband noise by pinnipeds

    NASA Astrophysics Data System (ADS)

    Holt, Marla M.; Schusterman, Ronald J.; Southall, Brandon L.; Kastak, David

    2004-05-01

    Although many pinnipeds (seals, sea lions, and walruses) emit broadband calls on land as part of their communication system, few studies have addressed these animals' ability to localize aerial broadband sounds. In this study, the aerial sound localization acuities of a female northern elephant seal (Mirounga angustirostris), a male harbor seal (Phoca vitulina), and a female California sea lion (Zalophus californianus) were measured in the horizontal plane. The stimulus was broadband white noise that was band pass filtered between 1.2 and 15 kHz. Testing was conducted in a hemi-anechoic chamber using a left/right forced choice procedure to measure the minimum audible angle (MAA) for each subject. MAAs were defined as half the angular separation of two sound sources bisected by a subject's midline that corresponded to 75% correct discrimination. MAAs were 4.7°, 3.6°, and 4.2° for the northern elephant seal, harbor seal, and California sea lion, respectively. These results demonstrate that individuals of these pinniped species have sound localization abilities comparable to the domestic cat and rhesus macaque. The acuity differences between our subjects were small and not predicted by head size. These results likely reflect the relatively acute general abilities of pinnipeds to localize aerial broadband signals.

  20. Inertial instrument system for aerial surveying

    USGS Publications Warehouse

    Brown, R.H.; Chapman, W.H.; Hanna, W.F.; Mongan, C.E.; Hursh, J.W.

    1985-01-01

    An inertial guidance system for aerial surveying has been developed under contract to the U.S. Geological Survey. This prototype system, known as the aerial profiling of terrain (APT) system, is designed to determine continuously the positions of points along an aircraft flight path, or the underlying terrain profile, to an accuracy of + or - 0.5 ft (15 cm) vertically and + or - 2 ft (61 cm) horizontally. The system 's objective thus is to accomplish, from a fixed-wing aircraft, what would traditionally be accomplished from ground-based topographic surveys combined with aerial photography and photogrammetry. The two-part strategy for measuring the terrain profile entails: (1) use of an inertial navigator for continuous determination of the three-coordinate position of the aircraft, and (2) use of an eye-safe pulsed laser profiler for continuous measurement of the vertical distance from aircraft to land surface, so that the desired terrain profile can then be directly computed. The APT system, installed in a DeHavilland Twin Otter aircraft, is typically flown at a speed of 115 mph (105 knots) at an altitude of 2,000 ft (610 m) above the terrain. Performance-evaluation flights have shown that the vertical and horizontal accuracy specifications are met. (USGS)

  1. Mask degradation monitoring with aerial mask inspector

    NASA Astrophysics Data System (ADS)

    Tseng, Wen-Jui; Fu, Yung-Ying; Lu, Shih-Ping; Jiang, Ming-Sian; Lin, Jeffrey; Wu, Clare; Lifschitz, Sivan; Tam, Aviram

    2013-06-01

    As design rule continues to shrink, microlithography is becoming more challenging and the photomasks need to comply with high scanner laser energy, low CDU, and ever more aggressive RETs. This give rise to numerous challenges in the semiconductor wafer fabrication plants. Some of these challenges being contamination (mainly haze and particles), mask pattern degradation (MoSi oxidation, chrome migration, etc.) and pellicle degradation. Fabs are constantly working to establish an efficient methodology to manage these challenges mainly using mask inspection, wafer inspection, SEM review and CD SEMs. Aerial technology offers a unique opportunity to address the above mask related challenges using one tool. The Applied Materials Aera3TM system has the inherent ability to inspect for defects (haze, particles, etc.), and track mask degradation (e.g. CDU). This paper focuses on haze monitoring, which is still a significant challenge in semiconductor manufacturing, and mask degradation effects that are starting to emerge as the next challenge for high volume semiconductor manufacturers. The paper describes Aerial inspector (Aera3) early haze methodology and mask degradation tracking related to high volume manufacturing. These will be demonstrated on memory products. At the end of the paper we take a brief look on subsequent work currently conducted on the more general issue of photo mask degradation monitoring by means of an Aerial inspector.

  2. Remotely deployable aerial inspection using tactile sensors

    SciTech Connect

    MacLeod, C. N.; Cao, J.; Pierce, S. G.; Dobie, G.; Summan, R.; Sullivan, J. C.; Pipe, A. G.

    2014-02-18

    For structural monitoring applications, the use of remotely deployable Non-Destructive Evaluation (NDE) inspection platforms offer many advantages, including improved accessibility, greater safety and reduced cost, when compared to traditional manual inspection techniques. The use of such platforms, previously reported by researchers at the University Strathclyde facilitates the potential for rapid scanning of large areas and volumes in hazardous locations. A common problem for both manual and remote deployment approaches lies in the intrinsic stand-off and surface coupling issues of typical NDE probes. The associated complications of these requirements are obviously significantly exacerbated when considering aerial based remote inspection and deployment, resulting in simple visual techniques being the preferred sensor payload. Researchers at Bristol Robotics Laboratory have developed biomimetic tactile sensors modelled on the facial whiskers (vibrissae) of animals such as rats and mice, with the latest sensors actively sweeping their tips across the surface in a back and forth motion. The current work reports on the design and performance of an aerial inspection platform and the suitability of tactile whisking sensors to aerial based surface monitoring applications.

  3. Inhibitory Effect of Sophorolipid on Candida albicans Biofilm Formation and Hyphal Growth

    PubMed Central

    Haque, Farazul; Alfatah, Md.; Ganesan, K.; Bhattacharyya, Mani Shankar

    2016-01-01

    Candida albicans causes superficial and life-threatening systemic infections. These are difficult to treat often due to drug resistance, particularly because C. albicans biofilms are inherently resistant to most antifungals. Sophorolipid (SL), a glycolipid biosurfactant, has been shown to have antimicrobial and anticancer properties. In this study, we investigated the effect of SL on C. albicans biofilm formation and preformed biofilms. SL was found to inhibit C. albicans biofilm formation as well as reduce the viability of preformed biofilms. Moreover, SL, when used along with amphotericin B (AmB) or fluconazole (FLZ), was found to act synergistically against biofilm formation and preformed biofilms. Effect of SL on C. albicans biofilm formation was further visualized by scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM), which revealed absence of hyphae, typical biofilm architecture and alteration in the morphology of biofilm cells. We also found that SL downregulates the expression of hypha specific genes HWP1, ALS1, ALS3, ECE1 and SAP4, which possibly explains the inhibitory effect of SL on hyphae and biofilm formation. PMID:27030404

  4. Grab a coffee: your aerial images are already analyzed

    NASA Astrophysics Data System (ADS)

    Garetto, Anthony; Rademacher, Thomas; Schulz, Kristian

    2015-07-01

    For over 2 decades the AIMTM platform has been utilized in mask shops as the standard for actinic review of photomask sites in order to perform defect disposition and repair review. Throughout this time the measurement throughput of the systems has been improved in order to keep pace with the requirements demanded by a manufacturing environment, however the analysis of the sites captured has seen little improvement and remained a manual process. This manual analysis of aerial images is time consuming, subject to error and unreliability and contributes to holding up turn-around time (TAT) and slowing process flow in a manufacturing environment. AutoAnalysis, the first application available for the FAVOR® platform, offers a solution to these problems by providing fully automated data transfer and analysis of AIMTM aerial images. The data is automatically output in a customizable format that can be tailored to your internal needs and the requests of your customers. Savings in terms of operator time arise from the automated analysis which no longer needs to be performed. Reliability is improved as human error is eliminated making sure the most defective region is always and consistently captured. Finally the TAT is shortened and process flow for the back end of the line improved as the analysis is fast and runs in parallel to the measurements. In this paper the concept and approach of AutoAnalysis will be presented as well as an update to the status of the project. A look at the benefits arising from the automation and the customizable approach of the solution will be shown.

  5. Aerial and soil seed banks enable populations of an annual species to cope with an unpredictable dune ecosystem

    PubMed Central

    Gao, Ruiru; Yang, Xuejun; Yang, Fan; Wei, Lingling; Huang, Zhenying; Walck, Jeffrey L.

    2014-01-01

    Background and Aims Simultaneous formation of aerial and soil seed banks by a species provides a mechanism for population maintenance in unpredictable environments. Eolian activity greatly affects growth and regeneration of plants in a sand dune system, but we know little about the difference in the contributions of these two seed banks to population dynamics in sand dunes. Methods Seed release, germination, seedling emergence and survival of a desert annual, Agriophyllum squarrosum (Chenopodiaceae), inhabiting the Ordos Sandland in China, were determined in order to explore the different functions of the aerial and soil seed banks. Key Results The size of the aerial seed bank was higher than that of the soil seed bank throughout the growing season. Seed release was positively related to wind velocity. Compared with the soil seed bank, seed germination from the aerial seed bank was lower at low temperature (5/15 °C night/day) but higher in the light. Seedling emergence from the soil seed bank was earlier than that from the aerial seed bank. Early-emerged (15 April–15 May) seedlings died due to frost, but seedlings that emerged during the following months survived to reproduce successfully. Conclusions The timing of seed release and different germination behaviour resulted in a temporal heterogeneity of seedling emergence and establishment between the two seed banks. The study suggests that a bet-hedging strategy for the two seed banks enables A. squarrosum populations to cope successfully with the unpredictable desert environment. PMID:24918206

  6. 20. AERIAL VIEW LOOKING NORTH FROM ARLINGTON TOWARDS LINCOLN MEMORIAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. AERIAL VIEW LOOKING NORTH FROM ARLINGTON TOWARDS LINCOLN MEMORIAL - Arlington Memorial Bridge, Spanning Potomac River between Lincoln Memorial & Arlington National Cemetery, Washington, District of Columbia, DC

  7. 21. AERIAL VIEW LOOKING EAST TOWARDS LINCOLN MEMORIAL AND WASHINGTON ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. AERIAL VIEW LOOKING EAST TOWARDS LINCOLN MEMORIAL AND WASHINGTON MONUMENT - Arlington Memorial Bridge, Spanning Potomac River between Lincoln Memorial & Arlington National Cemetery, Washington, District of Columbia, DC

  8. 1. Aerial view, looking northeast up Newark Bay, showing entire ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Aerial view, looking northeast up Newark Bay, showing entire island Charles Wisniewski, photographer, January 1985 - Shooters Island, Ships Graveyard, Newark Bay, Staten Island (subdivision), Richmond County, NY

  9. Aerial ropeways transport over flat and rough terrain

    SciTech Connect

    Not Available

    1983-06-01

    The modern aerial ropeway provides a very economic and efficient means of transporting bulk material over long distances, particularly over rough and mountainous terrain. There are currently two types of circulating aerial ropeway systems: monocable and bicable. Development of the present generation of ropeways has seen the capacity of conventional monocable increase to a maximum of 300 tons per hour, and that of bicable to 650 tons per hour. During this period of development, covering the last 30 to 40 years, reliability and efficiency of aerial systems has increased. Recent examples of aerial ropeway systems in Zimbabwe, Taiwan, and the Sudan are cited to illustrate the cost effectiveness and reliability of such systems.

  10. Detecting lost persons using the k-mean method applied to aerial photographs taken by unmanned aerial vehicles

    NASA Astrophysics Data System (ADS)

    Niedzielski, Tomasz; Stec, Magdalena; Wieczorek, Malgorzata; Slopek, Jacek; Jurecka, Miroslawa

    2016-04-01

    The objective of this work is to discuss the usefulness of the k-mean method in the process of detecting persons on oblique aerial photographs acquired by unmanned aerial vehicles (UAVs). The detection based on the k-mean procedure belongs to one of the modules of a larger Search and Rescue (SAR) system which is being developed at the University of Wroclaw, Poland (research project no. IP2014 032773 financed by the Ministry of Science and Higher Education of Poland). The module automatically processes individual geotagged visual-light UAV-taken photographs or their orthorectified versions. Firstly, we separate red (R), green (G) and blue (B) channels, express raster data as numeric matrices and acquire coordinates of centres of images using the exchangeable image file format (EXIF). Subsequently, we divide the matrices into matrices of smaller dimensions, the latter being associated with the size of spatial window which is suitable for discriminating between human and terrain. Each triplet of the smaller matrices (R, G and B) serves as input spatial data for the k-mean classification. We found that, in several configurations of the k-mean parameters, it is possible to distinguish a separate class which characterizes a person. We compare the skills of this approach by performing two experiments, based on UAV-taken RGB photographs and their orthorectified versions. This allows us to verify the hypothesis that the two exercises lead to similar classifications. In addition, we discuss the performance of the approach for dissimilar spatial windows, hence various dimensions of the above-mentioned matrices, and we do so in order to find the one which offers the most adequate classification. The numerical experiment is carried out using the data acquired during a dedicated observational UAV campaign carried out in the Izerskie Mountains (SW Poland).

  11. Effect of agitation speed on the morphology of Aspergillus niger HFD5A-1 hyphae and its pectinase production in submerged fermentation

    PubMed Central

    Ibrahim, Darah; Weloosamy, Haritharan; Lim, Sheh-Hong

    2015-01-01

    mycelial mat turned slowly to become a single circular pellet. Thus, it was found that agitation speed affected the morphological characteristics of the fungal hyphae/mycelia of A. niger HFD5A-1 by altering their external as well as internal cell structures. CONCLUSION: Exposure to higher shear stress with an increasing agitation speed could result in lower biomass yields as well as pectinase production by A. niger HFD5A-1. PMID:26322181

  12. Observation of coral reefs on Ishigaki Island, Japan, using Landsat TM images and aerial photographs

    SciTech Connect

    Matsunaga, Tsuneo; Kayanne, Hajime

    1997-06-01

    Ishigaki Island is located at the southwestern end of Japanese Islands and famous for its fringing coral reefs. More than twenty LANDSAT TM images in twelve years and aerial photographs taken on 1977 and 1994 were used to survey two shallow reefs on this island, Shiraho and Kabira. Intensive field surveys were also conducted in 1995. All satellite images of Shiraho were geometrically corrected and overlaid to construct a multi-date satellite data set. The effects of solar elevation and tide on satellite imagery were studied with this data set. The comparison of aerial and satellite images indicated that significant changes occurred between 1977 and 1984 in Kabira: rapid formation in the western part and decrease in the eastern part of dark patches. The field surveys revealed that newly formed dark patches in the west contain young corals. These results suggest that remote sensing is useful for not only mapping but also monitoring of shallow coral reefs.

  13. An aerial 3D printing test mission

    NASA Astrophysics Data System (ADS)

    Hirsch, Michael; McGuire, Thomas; Parsons, Michael; Leake, Skye; Straub, Jeremy

    2016-05-01

    This paper provides an overview of an aerial 3D printing technology, its development and its testing. This technology is potentially useful in its own right. In addition, this work advances the development of a related in-space 3D printing technology. A series of aerial 3D printing test missions, used to test the aerial printing technology, are discussed. Through completing these test missions, the design for an in-space 3D printer may be advanced. The current design for the in-space 3D printer involves focusing thermal energy to heat an extrusion head and allow for the extrusion of molten print material. Plastics can be used as well as composites including metal, allowing for the extrusion of conductive material. A variety of experiments will be used to test this initial 3D printer design. High altitude balloons will be used to test the effects of microgravity on 3D printing, as well as parabolic flight tests. Zero pressure balloons can be used to test the effect of long 3D printing missions subjected to low temperatures. Vacuum chambers will be used to test 3D printing in a vacuum environment. The results will be used to adapt a current prototype of an in-space 3D printer. Then, a small scale prototype can be sent into low-Earth orbit as a 3-U cube satellite. With the ability to 3D print in space demonstrated, future missions can launch production hardware through which the sustainability and durability of structures in space will be greatly improved.

  14. D Surface Generation from Aerial Thermal Imagery

    NASA Astrophysics Data System (ADS)

    Khodaei, B.; Samadzadegan, F.; Dadras Javan, F.; Hasani, H.

    2015-12-01

    Aerial thermal imagery has been recently applied to quantitative analysis of several scenes. For the mapping purpose based on aerial thermal imagery, high accuracy photogrammetric process is necessary. However, due to low geometric resolution and low contrast of thermal imaging sensors, there are some challenges in precise 3D measurement of objects. In this paper the potential of thermal video in 3D surface generation is evaluated. In the pre-processing step, thermal camera is geometrically calibrated using a calibration grid based on emissivity differences between the background and the targets. Then, Digital Surface Model (DSM) generation from thermal video imagery is performed in four steps. Initially, frames are extracted from video, then tie points are generated by Scale-Invariant Feature Transform (SIFT) algorithm. Bundle adjustment is then applied and the camera position and orientation parameters are determined. Finally, multi-resolution dense image matching algorithm is used to create 3D point cloud of the scene. Potential of the proposed method is evaluated based on thermal imaging cover an industrial area. The thermal camera has 640×480 Uncooled Focal Plane Array (UFPA) sensor, equipped with a 25 mm lens which mounted in the Unmanned Aerial Vehicle (UAV). The obtained results show the comparable accuracy of 3D model generated based on thermal images with respect to DSM generated from visible images, however thermal based DSM is somehow smoother with lower level of texture. Comparing the generated DSM with the 9 measured GCPs in the area shows the Root Mean Square Error (RMSE) value is smaller than 5 decimetres in both X and Y directions and 1.6 meters for the Z direction.

  15. Aerial thermography in archaeological prospection: Applications & processing

    NASA Astrophysics Data System (ADS)

    Cool, Autumn Chrysantha

    Aerial thermography is one of the least utilized archaeological prospection methods, yet it has great potential for detecting anthropogenic anomalies. Thermal infrared radiation is absorbed and reemitted at varying rates by all objects on and within the ground depending upon their density, composition, and moisture content. If an area containing archaeological features is recorded at the moment when their thermal signatures most strongly contrast with that of the surrounding matrix, they can be visually identified in thermal images. Research conducted in the 1960s and 1970s established a few basic rules for conducting thermal survey, but the expense associated with the method deterred most archaeologists from using this technology. Subsequent research was infrequent and almost exclusively appeared in the form of case studies. However, as the current proliferation of unmanned aerial vehicles (UAVs) and compact thermal cameras draws renewed attention to aerial thermography as an attractive and exciting form of survey, it is appropriate and necessary to reevaluate our approach. In this thesis I have taken a two-pronged approach. First, I built upon the groundwork of earlier researchers and created an experiment to explore the impact that different environmental and climatic conditions have on the success or failure of thermal imaging. I constructed a test site designed to mimic a range of archaeological features and imaged it under a variety of conditions to compare and contrast the results. Second, I explored a new method for processing thermal data that I hope will lead to a means of reducing noise and increasing the clarity of thermal images. This step was done as part of a case study so that the effectiveness of the processing method could be evaluated by comparison with the results of other geophysical surveys.

  16. Photogrammetric mapping using unmanned aerial vehicle

    NASA Astrophysics Data System (ADS)

    Graça, N.; Mitishita, E.; Gonçalves, J.

    2014-11-01

    Nowadays Unmanned Aerial Vehicle (UAV) technology has attracted attention for aerial photogrammetric mapping. The low cost and the feasibility to automatic flight along commanded waypoints can be considered as the main advantages of this technology in photogrammetric applications. Using GNSS/INS technologies the images are taken at the planned position of the exposure station and the exterior orientation parameters (position Xo, Yo, Zo and attitude ω, φ, χ) of images can be direct determined. However, common UAVs (off-the-shelf) do not replace the traditional aircraft platform. Overall, the main shortcomings are related to: difficulties to obtain the authorization to perform the flight in urban and rural areas, platform stability, safety flight, stability of the image block configuration, high number of the images and inaccuracies of the direct determination of the exterior orientation parameters of the images. In this paper are shown the obtained results from the project photogrammetric mapping using aerial images from the SIMEPAR UAV system. The PIPER J3 UAV Hydro aircraft was used. It has a micro pilot MP2128g. The system is fully integrated with 3-axis gyros/accelerometers, GPS, pressure altimeter, pressure airspeed sensors. A Sony Cyber-shot DSC-W300 was calibrated and used to get the image block. The flight height was close to 400 m, resulting GSD near to 0.10 m. The state of the art of the used technology, methodologies and the obtained results are shown and discussed. Finally advantages/shortcomings found in the study and main conclusions are presented

  17. Aeolic vibration of aerial electricity transmission cables

    NASA Astrophysics Data System (ADS)

    Avila, A.; Rodriguez-Vera, Ramon; Rayas, Juan A.; Barrientos, Bernardino

    2005-02-01

    A feasibility study for amplitude and frequency vibration measurement in aerial electricity transmission cable has been made. This study was carried out incorporating a fringe projection method for the experimental part and horizontal taut string model for theoretical one. However, this kind of model ignores some inherent properties such as cable sag and cable inclination. Then, this work reports advances on aeolic vibration considering real cables. Catenary and sag are considered in our theoretical model in such a way that an optical theodolite for measuring has been used. Preliminary measurements of the catenary as well as numerical simulation of a sagged cable vibration are given.

  18. Aerial view of Runway 33 at SLF

    NASA Technical Reports Server (NTRS)

    2000-01-01

    This aerial view shows the approach on Runway 33 at the KSC Shuttle Landing Facility. The runway is 15,000 feet long, with 1,000-foot paved overruns at each end; 300 feet wide (about length of football field), with 50-foot asphalt shoulders each side; 16 inches thick in the center, and 15 inches thick on sides. It has a slope of 24 inches from the center line to the edge for drainage. The single landing strip is considered two runways, depending on approach -- Runway 15 from northwest, Runway 33 from southeast.

  19. Robust crack detection strategies for aerial inspection

    NASA Astrophysics Data System (ADS)

    Aldea, Emanuel; Le Hégarat, Sylvie

    2015-04-01

    In this work, we evaluate the relevance of current state of the art algorithms widely employed in the detection of cracks, for the specific context of aerial inspection, which is characterized by image quality degradation. In this study we focus on minimal cost path and on Marked Point Process algorithms, and we test their resilience to motion blur. The results show that the current strategies for defect detection are sensitive to the quality of input images; alternatively, we suggest some improvements based on a-contrario methods that are able to cope with significant motion blur.

  20. Delivery of Unmanned Aerial Vehicle Data

    NASA Technical Reports Server (NTRS)

    Ivancic, William D.; Sullivan, Donald V.

    2011-01-01

    To support much of NASA's Upper Atmosphere Research Program science, NASA has acquired two Global Hawk Unmanned Aerial Vehicles (UAVs). Two major missions are currently planned using the Global Hawk: the Global Hawk Pacific (GloPac) and the Genesis and Rapid Intensification Processes (GRIP) missions. This paper briefly describes GloPac and GRIP, the concept of operations and the resulting requirements and communication architectures. Also discussed are requirements for future missions that may use satellite systems and networks owned and operated by third parties.

  1. Aerial view of the Press Site

    NASA Technical Reports Server (NTRS)

    1998-01-01

    In this aerial view, The News Center sits beyond a large parking lot, on a hill at the northeastern end of the Launch Complex 39 Area , next to the turn basin (at left). From left, the grandstand faces the launch pads several miles away on the Atlantic seashore; behind it, the television studio is the site of media conferences; next, the large white-roofed building is the hub of information and activity for press representatives. Lined up on the right of the Press Site are various buildings and trailers, home to major news networks. The parking lot can accommodate the hundreds of media personnel who attend Space Shuttle launches.

  2. 3D Buildings Extraction from Aerial Images

    NASA Astrophysics Data System (ADS)

    Melnikova, O.; Prandi, F.

    2011-09-01

    This paper introduces a semi-automatic method for buildings extraction through multiple-view aerial image analysis. The advantage of the used semi-automatic approach is that it allows processing of each building individually finding the parameters of buildings features extraction more precisely for each area. On the early stage the presented technique uses an extraction of line segments that is done only inside of areas specified manually. The rooftop hypothesis is used further to determine a subset of quadrangles, which could form building roofs from a set of extracted lines and corners obtained on the previous stage. After collecting of all potential roof shapes in all images overlaps, the epipolar geometry is applied to find matching between images. This allows to make an accurate selection of building roofs removing false-positive ones and to identify their global 3D coordinates given camera internal parameters and coordinates. The last step of the image matching is based on geometrical constraints in contrast to traditional correlation. The correlation is applied only in some highly restricted areas in order to find coordinates more precisely, in such a way significantly reducing processing time of the algorithm. The algorithm has been tested on a set of Milan's aerial images and shows highly accurate results.

  3. Community aerial mosquito control and naled exposure.

    PubMed

    Duprey, Zandra; Rivers, Samantha; Luber, George; Becker, Alan; Blackmore, Carina; Barr, Dana; Weerasekera, Gayanga; Kieszak, Stephanie; Flanders, W Dana; Rubin, Carol

    2008-03-01

    In October 2004, the Florida Department of Health (FLDOH) and the Centers for Disease Control and Prevention (CDC) assessed human exposure to ultra-low volume (ULV) aerial application of naled. Teams administered activity questionnaires regarding pesticide exposure and obtained baseline urine samples to quantify prespray naled metabolite levels. Following the spray event, participants were asked to collect postspray urine specimens within 12 h of the spray event and at 8-h intervals for up to 40 h. Upon completion, a postspray activity questionnaire was administered to study participants. Two hundred five (87%) participants completed the study. The urine analysis showed that although 67% of prespray urine samples had detectable levels of a naled metabolite, the majority of postspray samples were below the limit of detection (< LOD). Only at the "postspray 6" time period, which corresponds to a time greater than 5 half-lives (> 40 h) following exposure, the number of samples with detectable levels exceeded 50%. There was a significant decrease in naled metabolites from prespray to postspray (= .02), perhaps associated with a significant reduction (< or = 0.05) in some participants that may have resulted in pesticide exposure by means other than the mosquito control operations. These data suggest that aerial spraying of naled does not result in increased levels of naled in humans, provided the naled is used according to label instructions. PMID:18437813

  4. Unmanned Aerial Vehicles unique cost estimating requirements

    NASA Astrophysics Data System (ADS)

    Malone, P.; Apgar, H.; Stukes, S.; Sterk, S.

    Unmanned Aerial Vehicles (UAVs), also referred to as drones, are aerial platforms that fly without a human pilot onboard. UAVs are controlled autonomously by a computer in the vehicle or under the remote control of a pilot stationed at a fixed ground location. There are a wide variety of drone shapes, sizes, configurations, complexities, and characteristics. Use of these devices by the Department of Defense (DoD), NASA, civil and commercial organizations continues to grow. UAVs are commonly used for intelligence, surveillance, reconnaissance (ISR). They are also use for combat operations, and civil applications, such as firefighting, non-military security work, surveillance of infrastructure (e.g. pipelines, power lines and country borders). UAVs are often preferred for missions that require sustained persistence (over 4 hours in duration), or are “ too dangerous, dull or dirty” for manned aircraft. Moreover, they can offer significant acquisition and operations cost savings over traditional manned aircraft. Because of these unique characteristics and missions, UAV estimates require some unique estimating methods. This paper describes a framework for estimating UAV systems total ownership cost including hardware components, software design, and operations. The challenge of collecting data, testing the sensitivities of cost drivers, and creating cost estimating relationships (CERs) for each key work breakdown structure (WBS) element is discussed. The autonomous operation of UAVs is especially challenging from a software perspective.

  5. Moving Obstacle Avoidance for Unmanned Aerial Vehicles

    NASA Astrophysics Data System (ADS)

    Lin, Yucong

    There has been a vast increase in applications of Unmanned Aerial Vehicles (UAVs) in civilian domains. To operate in the civilian airspace, a UAV must be able to sense and avoid both static and moving obstacles for flight safety. While indoor and low-altitude environments are mainly occupied by static obstacles, risks in space of higher altitude primarily come from moving obstacles such as other aircraft or flying vehicles in the airspace. Therefore, the ability to avoid moving obstacles becomes a necessity for Unmanned Aerial Vehicles. Towards enabling a UAV to autonomously sense and avoid moving obstacles, this thesis makes the following contributions. Initially, an image-based reactive motion planner is developed for a quadrotor to avoid a fast approaching obstacle. Furthermore, A Dubin's curve based geometry method is developed as a global path planner for a fixed-wing UAV to avoid collisions with aircraft. The image-based method is unable to produce an optimal path and the geometry method uses a simplified UAV model. To compensate these two disadvantages, a series of algorithms built upon the Closed-Loop Rapid Exploratory Random Tree are developed as global path planners to generate collision avoidance paths in real time. The algorithms are validated in Software-In-the-Loop (SITL) and Hardware-In-the-Loop (HIL) simulations using a fixed-wing UAV model and in real flight experiments using quadrotors. It is observed that the algorithm enables a UAV to avoid moving obstacles approaching to it with different directions and speeds.

  6. Aerial survey estimates of fallow deer abundance

    USGS Publications Warehouse

    Gogan, Peter J.; Gates, Natalie B.; Lubow, Bruce C.; Pettit, Suzanne

    2012-01-01

    Reliable estimates of the distribution and abundance of an ungulate species is essential prior to establishing and implementing a management program. We used ground surveys to determine distribution and ground and aerial surveys and individually marked deer to estimate the abundance of fallow deer (Dama dama) in north-coastal California. Fallow deer had limited distribution and heterogeneous densities. Estimated post-rut densities across 4 annual surveys ranged from a low of 1.4 (SE=0.2) deer/km2 to a high of 3.3 (se=0.5) deer/km2 in a low density stratum and from 49.0 (SE=8.3) deer/km2 to 111.6 deer/km2 in a high density stratum. Sightability was positively influenced by the presence of white color-phase deer in a group and group size, and varied between airial and ground-based observers and by density strata. Our findings underscore the utility of double-observer surveys and aerial surveys with individually marked deer, both incorporating covariates to model sightability, to estimate deer abundance.

  7. Design of an integrated aerial image sensor

    NASA Astrophysics Data System (ADS)

    Xue, Jing; Spanos, Costas J.

    2005-05-01

    The subject of this paper is a novel integrated aerial image sensor (IAIS) system suitable for integration within the surface of an autonomous test wafer. The IAIS could be used as a lithography processing monitor, affording a "wafer's eye view" of the process, and therefore facilitating advanced process control and diagnostics without integrating (and dedicating) the sensor to the processing equipment. The IAIS is composed of an aperture mask and an array of photo-detectors. In order to retrieve nanometer scale resolution of the aerial image with a practical photo-detector pixel size, we propose a design of an aperture mask involving a series of spatial phase "moving" aperture groups. We demonstrate a design example aimed at the 65nm technology node through TEMPEST simulation. The optimized, key design parameters include an aperture width in the range of 30nm, aperture thickness in the range of 70nm, and offer a spatial resolution of about 5nm, all with comfortable fabrication tolerances. Our preliminary simulation work indicates the possibility of the IAIS being applied to the immersion lithography. A bench-top far-field experiment verifies that our approach of the spatial frequency down-shift through forming large Moire patterns is feasible.

  8. Monitoring and Assuring the Quality of Digital Aerial Data

    NASA Technical Reports Server (NTRS)

    Christopherson, Jon

    2007-01-01

    This viewgraph presentation explains the USGS plan for monitoring and assuring the quality of digital aerial data. The contents include: 1) History of USGS Aerial Imaging Involvement; 2) USGS Research and Results; 3) Outline of USGS Quality Assurance Plan; 4) Other areas of Interest; and 5) Summary

  9. Aerial application methods for increasing spray deposition on wheat heads

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fusarium head blight (FHB) is a major disease of wheat and barley in several small grain production areas in the United States and, as such, the development and evaluation of aerial application technologies that enhance the efficacy of fungicides with aerial spray applications is critical to its man...

  10. 7 CFR 1755.506 - Aerial wire services

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Aerial wire services 1755.506 Section 1755.506 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE TELECOMMUNICATIONS POLICIES ON SPECIFICATIONS, ACCEPTABLE MATERIALS, AND STANDARD CONTRACT FORMS § 1755.506 Aerial wire services...

  11. 11. Photographic copy of aerial photograph dated ca. 1954; Photographer ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. Photographic copy of aerial photograph dated ca. 1954; Photographer unknown; Original owned by Waterloo Courier, Waterloo, Iowa; AERIAL VIEW OF RATH COMPLEX, LOOKING WEST; BEEF KILLING BUILDING (149 AND LIVESTOCK HOLDING AREAS ARE AT LEFT CENTER; FERTILIZER PLANT/STORAGE BUILDINGS ARE AT BOTTOM OF PHOTO - Rath Packing Company, Sycamore Street between Elm & Eighteenth Streets, Waterloo, Black Hawk County, IA

  12. AERIAL OF VISITORS INFORMATION CENTER [VIC] & ROCKET GARDEN EXHIBIT

    NASA Technical Reports Server (NTRS)

    1975-01-01

    AERIAL OF VISITORS INFORMATION CENTER [VIC] & ROCKET GARDEN EXHIBIT KSC-375C-0604.12 116-KSC-375C-604.12, P-20220, ARCHIVE-04465 Aerial view of Kennedy Space Center Visitors Information Center looking east-northeastward. New food services building under construction is visible at upper left.

  13. Kite Aerial Photography (KAP) as a Tool for Field Teaching

    ERIC Educational Resources Information Center

    Sander, Lasse

    2014-01-01

    Kite aerial photography (KAP) is proposed as a creative tool for geography field teaching and as a medium to approach the complexity of readily available geodata. The method can be integrated as field experiment, surveying technique or group activity. The acquired aerial images can instantaneously be integrated in geographic information systems…

  14. 12. Photocopy of photograph (original negative located at Aerial Mapping ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. Photocopy of photograph (original negative located at Aerial Mapping Company, Phoenix, Arizona, Negative No. 90046) Photographer unknown, March 28, 1990. DIMENSION-CONTROLLED AERIAL PHOTOGRAPHIC MAP. - Yuma Main Street Water Treatment Plant, Jones Street at foot of Main Street, Yuma, Yuma County, AZ

  15. An algorithm for approximate rectification of digital aerial images

    Technology Transfer Automated Retrieval System (TEKTRAN)

    High-resolution aerial photography is one of the most valuable tools available for managing extensive landscapes. With recent advances in digital camera technology, computer hardware, and software, aerial photography is easier to collect, store, and transfer than ever before. Images can be automa...

  16. DETAIL VIEW OF AERIAL TRAM CABLE COUNTERWEIGHT SYSTEM, LOOKING DOWN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL VIEW OF AERIAL TRAM CABLE COUNTERWEIGHT SYSTEM, LOOKING DOWN THROUGH THE LOWER TERMINAL FLOOR. TWO SUSPENDED ROCK FILLED WOODEN BOXES CAN BE SEEN AT BOTTOM. THE METAL FRAMEWORK WAS INSTALLED BY THE PARK SERVICE DURING THE AERIAL TRAM'S STABILIZATION IN THE 1983. - Keane Wonder Mine, Park Route 4 (Daylight Pass Cutoff), Death Valley Junction, Inyo County, CA

  17. 12. Photographic copy of aerial photograph dated October 1988; Photographed ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. Photographic copy of aerial photograph dated October 1988; Photographed by Aerial Services, Incorporated, Waterloo, Iowa; THE RATH COMPLEX FROM DIRECTLY OVERHEAD; THE PACKING PLANT BUILDINGS OCCUPY UPPER RIGHT QUADRANT OF PHOTO; 18TH STREET BRIDGE AT CENTER - Rath Packing Company, Sycamore Street between Elm & Eighteenth Streets, Waterloo, Black Hawk County, IA

  18. The remote characterization of vegetation using Unmanned Aerial Vehicle photography

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Unmanned Aerial Vehicles (UAVs) can fly in place of piloted aircraft to gather remote sensing information on vegetation characteristics. The type of sensors flown depends on the instrument payload capacity available, so that, depending on the specific UAV, it is possible to obtain video, aerial phot...

  19. Effects of pesticides aerial applications on rice quality

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Aerial application of pesticides has become an important research topic in recent years. This research investigated the effects of two types of commercial pesticides on the rice quality under low volume aerial application. It could provide guidance for the pesticide application and choose the right ...

  20. A practical guide to the design of rhombic aerials

    NASA Astrophysics Data System (ADS)

    Tyler, J. N.

    1985-04-01

    Basic principles of the rhombic aerial are explained and design charts are presented. These, compiled using two simple computer programs, offer a considerable time saving in design. Examples of aerials designed using the charts are given, together with polar diagrams of their theoretical performance.

  1. Calculation and uses of the lithographic aerial image

    NASA Astrophysics Data System (ADS)

    Flagello, Donis G.; Smith, Daniel G.

    2012-09-01

    Beginning with the seminal Dill papers of 1975, the aerial image has been essential for understanding the process of microlithography. From the aerial image, we can predict the performance of a given lithographic process in terms of depth of focus, exposure latitude, etc. As lithographic technologies improved, reaching smaller and smaller printed features, the sophistication of aerial image calculations has had to increase from simple incoherent imaging theory, to partial coherence, polarization effects, thin film effects at the resist, thick mask effects, and so on. This tutorial provides an overview and semihistorical development of the aerial image calculation and then provides a review of some of the various ways in which the aerial image is typically used to estimate the performance of the lithographic process.

  2. In Vivo Inhibitory Effect on the Biofilm Formation of Candida albicans by Liverwort Derived Riccardin D

    PubMed Central

    Li, Yan; Ma, Yukui; Zhang, Li; Guo, Feng; Ren, Lei; Yang, Rui; Li, Ying; Lou, Hongxiang

    2012-01-01

    Riccardin D, a macrocyclic bisbibenzyl isolated from Chinese liverwort Dumortiera hirsute, has been proved to have inhibitory effect on biofilms formation of Candida albicans in in vitro study. Our present study aims to investigate the in vivo effect and mechanisms of riccardin D against C. albicans biofilms when used alone or in combination with clinical using antifungal agent fluconazole. XTT reduction assay revealed riccardin D had both prophylactic and therapeutic effect against C. albicans biofilms formation in a dose-dependent manner when using a central venous catheter related infective animal model. Scanning electron microscope and laser confocal scanning microscope showed that the morphology of biofilms was altered remarkably after riccardin D treatment, especially hypha growth inhibition. To uncover the underlying molecular mechanisms, quantitative real-time RT-PCR was performed to observe the variation of related genes. The downregulation of hypha-specific genes such as ALS1, ALS3, ECE1, EFG1, HWP1 and CDC35 following riccardin D treatment suggested riccardin D inhibited the Ras-cAMP-Efg pathway to retard the hypha formation, then leading to the defect of biofilms maturation. Moreover, riccardin D displayed an increased antifungal activity when administered in combination with fluconazole. Our study provides a potential clinical application to eliminate the biofilms of relevant pathogens. PMID:22545115

  3. Effects of heating, aerial exposure and illumination on stability of fucoxanthin in canola oil.

    PubMed

    Zhao, Dong; Kim, Sang-Min; Pan, Cheol-Ho; Chung, Donghwa

    2014-02-15

    The effects of heating, aerial exposure and illumination on the stability of fucoxanthin was investigated in canola oil. In the absence of air and light, the heating caused the degradation of total and all-trans fucoxanthin at all tested temperatures between 25 and 100 °C. The increase of heating temperature promoted the formation of 13-cis and 13'-cis and the degradation of 9'-cis. The degradation and formation reactions were found to follow simple first-order kinetics and to be energetically unfavorable, non-spontaneous processes. Arrhenius-type temperature dependence was observed for the degradation of total and all-trans fucoxanthin but not for the reactions of cis isomers. The aerial exposure promoted the oxidative fucoxanthin degradation at 25 °C, whilst illumination caused the initial formation of all-trans, with concurrent sudden degradation of 13-cis and 13'-cis, and the considerable formation of 9'-cis. The fucoxanthin degradation was synergistically promoted when exposed to both air and light. PMID:24128507

  4. Observing snow cover using unmanned aerial vehicle

    NASA Astrophysics Data System (ADS)

    Spallek, Waldemar; Witek, Matylda; Niedzielski, Tomasz

    2016-04-01

    Snow cover is a key environmental variable that influences high flow events driven by snow-melt episodes. Estimates of snow extent (SE), snow depth (SD) and snow water equivalent (SWE) allow to approximate runoff caused by snow-melt episodes. These variables are purely spatial characteristics, and hence their pointwise measurements using terrestrial monitoring systems do not offer the comprehensive and fully-spatial information on water storage in snow. Existing satellite observations of snow reveal moderate spatial resolution which, not uncommonly, is not fine enough to estimate the above-mentioned snow-related variables for small catchments. High-resolution aerial photographs and the resulting orthophotomaps and digital surface models (DSMs), obtained using unmanned aerial vehicles (UAVs), may offer spatial resolution of 3 cm/px. The UAV-based observation of snow cover may be done using the near-infrared (NIR) cameras and visible-light cameras. Since the beginning of 2015, in frame of the research project no. LIDER/012/223/L-5/13/NCBR/2014 financed by the National Centre for Research and Development of Poland, we have performed a series of the UAV flights targeted at four sites in the Kwisa catchment in the Izerskie Mts. (part of the Sudetes, SW Poland). Observations are carried out with the ultralight UAV swinglet CAM (produced by senseFly, lightweight 0.5 kg, wingspan 80 cm) which enables on-demand sampling at low costs. The aim of the field work is to acquire aerial photographs taken using the visible-light and NIR cameras for a purpose of producing time series of DSMs and orthophotomaps with snow cover for all sites. The DSMs are used to calculate SD as difference between observational (with snow) and reference (without snow) models. In order to verify such an approach to compute SD we apply several procedures, one of which is the estimation of SE using the corresponding orthophotomaps generated on a basis of visual-light and NIR images. The objective of this

  5. Fatty acid content and profile of the aerial microalga Coccomyxa sp. isolated from dry environments.

    PubMed

    Abe, Katsuya; Ishiwatari, Takehiro; Wakamatsu, Michihiro; Aburai, Nobuhiro

    2014-11-01

    Aerial algae are considered to be highly tolerant of and adaptable to severe conditions including radiation, desiccation, high temperatures, and nutrient deficiency, compared with those from aquatic habitats. There are considerable variations in the fatty acid (FA) composition of aerial microalgae from dry environments. A new species with a high lipid level was found on concrete surfaces and was identified as Coccomyxa sp. KGU-D001 (Trebouxiophyceae). This study characterized its FA content and profile in a bath culture. The alga showed a constant specific growth rate (0.26 day(-1)) ranging in light intensity from 20 to 80 μmol photons m(-2) s(-1). The algal cells started to form oil bodies in the early stationary phase of growth, and oil bodies occupied most of the cells during the late stationary phase when the cells accumulated 27 % total fatty acids (TFA). The process of lipid body formation accumulating large amounts of triacylglycerols (TAG) appeared to be very unusual in response to stress conditions persisting for a relatively long culture time (50 days). This study could indicate that aerial microalgae will be a candidate for biodiesel production when a new cultivation method is developed using extreme stresses such as nutritional deficiency and/or desiccation. PMID:25146196

  6. Increased productivity of repair verification by offline analysis of aerial images

    NASA Astrophysics Data System (ADS)

    Villa, Ernesto; Sartelli, Luca; Miyashita, Hiroyuki; Scheruebl, Thomas; Richter, Rigo; Thaler, Thomas

    2010-05-01

    Using AIMSTM to qualify repairs of defects on photomasks is the industry standard. AIMSTM provides a reasonable matching of lithographic imaging performances without the need of wafer prints. The need of utilisation of this capability by photomask manufacturers has risen due to the increased complexity of layouts incorporating aggressive RET and phase shift technologies as well as tighter specifications have pushed aerial image metrology to consider CD performance results in addition to the traditional intensity verification. The content of the paper describes the utilisation of the AIMSTM Repair Verification (RV) software for the verification of aerial images in a mask shop production environment. The software is used to analyze images from various AIMSTM tool generations and the two main routines, Multi Slice Analysis (MSA) and Image Compare (IC), are used to compare defective and non-defective areas of aerial images. It is detailed how the RV software cleans "non real" errors potentially induced by operator misjudgements, thus providing accurate and repeatable analyses all proven against the results achieved manually. A user friendly GUI drives the user through few simple, fast and safe operations and automatically provides summary tables containing all the relevant results of the analysis that can be easily exported in a proper format and sent out to the customer as a technical documentation. This results in a sensible improvement of the throughput of the printability evaluation process in a mask manufacturing environment, providing reliable analyses at a higher productivity.

  7. Fuzzy C-Means Algorithm for Segmentation of Aerial Photography Data Obtained Using Unmanned Aerial Vehicle

    NASA Astrophysics Data System (ADS)

    Akinin, M. V.; Akinina, N. V.; Klochkov, A. Y.; Nikiforov, M. B.; Sokolova, A. V.

    2015-05-01

    The report reviewed the algorithm fuzzy c-means, performs image segmentation, give an estimate of the quality of his work on the criterion of Xie-Beni, contain the results of experimental studies of the algorithm in the context of solving the problem of drawing up detailed two-dimensional maps with the use of unmanned aerial vehicles. According to the results of the experiment concluded that the possibility of applying the algorithm in problems of decoding images obtained as a result of aerial photography. The considered algorithm can significantly break the original image into a plurality of segments (clusters) in a relatively short period of time, which is achieved by modification of the original k-means algorithm to work in a fuzzy task.

  8. A Primer on Autonomous Aerial Vehicle Design.

    PubMed

    Coppejans, Hugo H G; Myburgh, Herman C

    2015-01-01

    There is a large amount of research currently being done on autonomous micro-aerial vehicles (MAV), such as quadrotor helicopters or quadcopters. The ability to create a working autonomous MAV depends mainly on integrating a simultaneous localization and mapping (SLAM) solution with the rest of the system. This paper provides an introduction for creating an autonomous MAV for enclosed environments, aimed at students and professionals alike. The standard autonomous system and MAV automation are discussed, while we focus on the core concepts of SLAM systems and trajectory planning algorithms. The advantages and disadvantages of using remote processing are evaluated, and recommendations are made regarding the viability of on-board processing. Recommendations are made regarding best practices to serve as a guideline for aspirant MAV designers. PMID:26633410

  9. A Primer on Autonomous Aerial Vehicle Design

    PubMed Central

    Coppejans, Hugo H. G.; Myburgh, Herman C.

    2015-01-01

    There is a large amount of research currently being done on autonomous micro-aerial vehicles (MAV), such as quadrotor helicopters or quadcopters. The ability to create a working autonomous MAV depends mainly on integrating a simultaneous localization and mapping (SLAM) solution with the rest of the system. This paper provides an introduction for creating an autonomous MAV for enclosed environments, aimed at students and professionals alike. The standard autonomous system and MAV automation are discussed, while we focus on the core concepts of SLAM systems and trajectory planning algorithms. The advantages and disadvantages of using remote processing are evaluated, and recommendations are made regarding the viability of on-board processing. Recommendations are made regarding best practices to serve as a guideline for aspirant MAV designers. PMID:26633410

  10. Aerial Magnetic Sensing with AN Uav Helicopter

    NASA Astrophysics Data System (ADS)

    Eck, C.; Imbach, B.

    2011-09-01

    This paper concentrates on aerial magnetic sensing with an autonomous Scout B1-100 UAV helicopter. A high-resolution 3-axis mag- netic sensor has been mounted on the helicopter in order to generate a detailed magnetic map and to identify various ferrous objects in the soil. The development is based on advanced mission planning for the UAV as well as test flights under challenging weather conditions such as wind gusts and snow fall. Finally, this paper summarizes a real-world application after the collapse of a daylight coal mining where various persons have been killed and multiple infrastructure objects have been buried. The task of magnetic scanning was applied in order to find buried vehicles where miners have been expected based on eyewitnesses during the collapse. However, while several ferrous objects have been located, the van could not be identified in the extensive area of the landslide.

  11. Aerial view of Launch Complex 39

    NASA Technical Reports Server (NTRS)

    1998-01-01

    In this aerial view looking south can be seen Launch Complex (LC) 39 area, where assembly, checkout and launch of the Space Shuttle Orbiter and its External Tank and twin Solid Rocket Boosters take place. Central to the complex is the tallest building at the center, the Vehicle Assembly Building (VAB). To the immediate left, from top to bottom, are the Orbiter Processing Facility (OPF) High Bay 3 and new engine shop (north side), OPF Modular Office Building, Thermal Protection System Facility, and a crawler-transporter (to its left). In front of the VAB are OPF 1 and OPF 2. At right is the Processing Control Center. West of OPF 3 is the Mobile Launch Platform. In the upper left corner is Launch Pad B; at the far right is the turn basin, with the Press Site located just below it to the right.

  12. Aerial photography for sensing plant anomalies

    NASA Technical Reports Server (NTRS)

    Gausman, H. W.; Cardenas, R.; Hart, W. G.

    1970-01-01

    Changes in the red tonal response of Kodak Ektrachrome Infrared Aero 8443 film (EIR) are often incorrectly attributed solely to variations in infrared light reflectance of plant leaves, when the primary influence is a difference in visible light reflectance induced by varying chlorophyll contents. Comparisons are made among aerial photographic images of high- and low-chlorophyll foliage. New growth, foot rot, and boron and chloride nutrient toxicites produce low-chlorophyll foliage, and EIR transparency images of light red or white compared with dark-red images of high-chlorophyll foliage. Deposits of the sooty mold fungus that subsists on the honeydew produced by brown soft scale insects, obscure the citrus leaves' green color. Infected trees appear as black images on EIR film transparencies compared with red images of healthy trees.

  13. Precision wildlife monitoring using unmanned aerial vehicles

    PubMed Central

    Hodgson, Jarrod C.; Baylis, Shane M.; Mott, Rowan; Herrod, Ashley; Clarke, Rohan H.

    2016-01-01

    Unmanned aerial vehicles (UAVs) represent a new frontier in environmental research. Their use has the potential to revolutionise the field if they prove capable of improving data quality or the ease with which data are collected beyond traditional methods. We apply UAV technology to wildlife monitoring in tropical and polar environments and demonstrate that UAV-derived counts of colony nesting birds are an order of magnitude more precise than traditional ground counts. The increased count precision afforded by UAVs, along with their ability to survey hard-to-reach populations and places, will likely drive many wildlife monitoring projects that rely on population counts to transition from traditional methods to UAV technology. Careful consideration will be required to ensure the coherence of historic data sets with new UAV-derived data and we propose a method for determining the number of duplicated (concurrent UAV and ground counts) sampling points needed to achieve data compatibility. PMID:26986721

  14. Precision wildlife monitoring using unmanned aerial vehicles.

    PubMed

    Hodgson, Jarrod C; Baylis, Shane M; Mott, Rowan; Herrod, Ashley; Clarke, Rohan H

    2016-01-01

    Unmanned aerial vehicles (UAVs) represent a new frontier in environmental research. Their use has the potential to revolutionise the field if they prove capable of improving data quality or the ease with which data are collected beyond traditional methods. We apply UAV technology to wildlife monitoring in tropical and polar environments and demonstrate that UAV-derived counts of colony nesting birds are an order of magnitude more precise than traditional ground counts. The increased count precision afforded by UAVs, along with their ability to survey hard-to-reach populations and places, will likely drive many wildlife monitoring projects that rely on population counts to transition from traditional methods to UAV technology. Careful consideration will be required to ensure the coherence of historic data sets with new UAV-derived data and we propose a method for determining the number of duplicated (concurrent UAV and ground counts) sampling points needed to achieve data compatibility. PMID:26986721

  15. Global aerial flyways allow efficient travelling.

    PubMed

    Kranstauber, B; Weinzierl, R; Wikelski, M; Safi, K

    2015-12-01

    Birds migrate over vast distances at substantial costs. The highly dynamic nature of the air makes the selection of the best travel route difficult. We investigated to what extent migratory birds may optimise migratory route choice with respect to wind, and if route choice can be subject to natural selection. Following the optimal route, calculated using 21 years of empirical global wind data, reduced median travel time by 26.5% compared to the spatially shortest route. When we used a time-dependent survival model to quantify the adaptive benefit of choosing a fixed wind-optimised route, 84.8% of pairs of locations yielded a route with a higher survival than the shortest route. This suggests that birds, even if incapable of predicting wind individually, could adjust their migratory routes at a population level. As a consequence, this may result in the emergence of low-cost flyways representing a global network of aerial migratory pathways. PMID:26477348

  16. Reference LIDAR Surfaces for Enhanced Aerial Triangulation and Camera Calibration

    NASA Astrophysics Data System (ADS)

    Gneeniss, A. S.; Mills, J. P.; Miller, P. E.

    2013-04-01

    Due to the complementary characteristics of lidar and photogrammetry, the integration of data derived from these techniques continues to receive attention from the relevant research communities. The research presented in this paper draws on this by adopting lidar data as a control surface from which aerial triangulation and camera system calibration can be performed. The research methodology implements automatic registration between the reference lidar DTM and dense photogrammetric point clouds which are derived using Integrated Sensing Orientation (ISO). This utilises a robust least squares surface matching algorithm, which is iterated to improve results by increasing the photogrammetric point quality through self-calibrating bundle adjustment. After a successful registration, well distributed lidar control points (LCPs) are automatically extracted from the transformed photogrammetric point clouds using predefined criteria. Finally, self-calibrating bundle block adjustment using different configurations of LCPs is performed to refine camera interior orientation (IO) parameters. The methodology has been assessed using imagery from a Vexcel UltraCamX large format camera. Analysis and the performance of the camera and its impact on the registration accuracy was performed. Furthermore, refinement of camera IO parameters was also applied using the derived LCPs. Tests also included investigations into the influence of the number and weight of LCPs in the accuracy of the bundle adjustment. Results from the UltraCamX block were compared with reference calibration results using ground control points in the test area, with good agreement found between the two approaches.

  17. Contact area as the intuitive definition of contact CD based on aerial image analysis

    NASA Astrophysics Data System (ADS)

    Polonsky, Netanel; Sagiv, Amir; Mangan, Shmoolik

    2009-03-01

    As feature sizes continue to diminish, optical lithography is driven into the extreme low-k1 regime, where the high MEEF increasingly complicates the relationship between the mask pattern and the aerial image. This is true in particular for twodimensional mask patterns, which are by nature much more complicated than patterns possessing one-dimensional symmetry. Thus, the intricacy of 2D image formation typically requires a much broader arsenal of resolution enhancement techniques over complex phase shift masks, including SRAFs and OPC, as well as exotic off-axis illumination geometries. This complexity on the mask side makes the printability effect of a random defect on a 2D pattern a field of rich and delicate phenomenology. This complexity is reflected in the dispute over the CD definition of 2D patterns: some sources use the X and Y values, while others use the contact area. Here, we argue that for compact features, for which the largest dimension is not wider than the PSF of the stepper optics, the area definition is the natural one. We study the response of the aerial image to small perturbations in mask pattern. We show that any perturbation creates an effect extending in all directions, thus affecting the area and not the size in a single direction. We also show that, irrespective of the source of perturbation, the aerial signal is proportional to the variation in the area of the printed feature. The consequence of this effect is that aerial inspection signal scales linearly with the variation of printed area of the tested feature.

  18. Building and road detection from large aerial imagery

    NASA Astrophysics Data System (ADS)

    Saito, Shunta; Aoki, Yoshimitsu

    2015-02-01

    Building and road detection from aerial imagery has many applications in a wide range of areas including urban design, real-estate management, and disaster relief. The extracting buildings and roads from aerial imagery has been performed by human experts manually, so that it has been very costly and time-consuming process. Our goal is to develop a system for automatically detecting buildings and roads directly from aerial imagery. Many attempts at automatic aerial imagery interpretation have been proposed in remote sensing literature, but much of early works use local features to classify each pixel or segment to an object label, so that these kind of approach needs some prior knowledge on object appearance or class-conditional distribution of pixel values. Furthermore, some works also need a segmentation step as pre-processing. Therefore, we use Convolutional Neural Networks(CNN) to learn mapping from raw pixel values in aerial imagery to three object labels (buildings, roads, and others), in other words, we generate three-channel maps from raw aerial imagery input. We take a patch-based semantic segmentation approach, so we firstly divide large aerial imagery into small patches and then train the CNN with those patches and corresponding three-channel map patches. Finally, we evaluate our system on a large-scale road and building detection datasets that is publicly available.

  19. Low-altitude aerial color digital photographic survey of the San Andreas Fault

    USGS Publications Warehouse

    Lynch, David K.; Hudnut, Kenneth W.; Dearborn, David S.P.

    2010-01-01

    Ever since 1858, when Gaspard-Félix Tournachon (pen name Félix Nadar) took the first aerial photograph (Professional Aerial Photographers Association 2009), the scientific value and popular appeal of such pictures have been widely recognized. Indeed, Nadar patented the idea of using aerial photographs in mapmaking and surveying. Since then, aerial imagery has flourished, eventually making the leap to space and to wavelengths outside the visible range. Yet until recently, the availability of such surveys has been limited to technical organizations with significant resources. Geolocation required extensive time and equipment, and distribution was costly and slow. While these situations still plague older surveys, modern digital photography and lidar systems acquire well-calibrated and easily shared imagery, although expensive, platform-specific software is sometimes still needed to manage and analyze the data. With current consumer-level electronics (cameras and computers) and broadband internet access, acquisition and distribution of large imaging data sets are now possible for virtually anyone. In this paper we demonstrate a simple, low-cost means of obtaining useful aerial imagery by reporting two new, high-resolution, low-cost, color digital photographic surveys of selected portions of the San Andreas fault in California. All pictures are in standard jpeg format. The first set of imagery covers a 92-km-long section of the fault in Kern and San Luis Obispo counties and includes the entire Carrizo Plain. The second covers the region from Lake of the Woods to Cajon Pass in Kern, Los Angeles, and San Bernardino counties (151 km) and includes Lone Pine Canyon soon after the ground was largely denuded by the Sheep Fire of October 2009. The first survey produced a total of 1,454 oblique digital photographs (4,288 x 2,848 pixels, average 6 Mb each) and the second produced 3,762 nadir images from an elevation of approximately 150 m above ground level (AGL) on the

  20. Aerial image retargeting (AIR): achieving litho-friendly designs

    NASA Astrophysics Data System (ADS)

    Yehia Hamouda, Ayman; Word, James; Anis, Mohab; Karim, Karim S.

    2011-04-01

    In this work, we present a new technique to detect non-Litho-Friendly design areas based on their Aerial Image signature. The aerial image is calculated for the litho target (pre-OPC). This is followed by the fixing (retargeting) the design to achieve a litho friendly OPC target. This technique is applied and tested on 28 nm metal layer and shows a big improvement in the process window performance. For an optimized Aerial-Image-Retargeting (AIR) recipe is very computationally efficient and its runtime doesn't consume more than 1% of the OPC flow runtime.

  1. Exploration of Titan using Vertical Lift Aerial Vehicles

    NASA Technical Reports Server (NTRS)

    Young, L. A.

    2001-01-01

    Autonomous vertical lift aerial vehicles (such as rotorcraft or powered-lift vehicles) hold considerable potential for supporting planetary science and exploration missions. Vertical lift aerial vehicles would have the following advantages/attributes for planetary exploration: low-speed and low-altitude detailed aerial surveys; remote-site sample return to lander platforms; precision placement of scientific probes; soft landing capability for vehicle reuse (multiple flights) and remote-site monitoring; greater range, speed, and access to hazardous terrain than a surface rover; greater resolution of surface details than an orbiter or balloons. Exploration of Titan presents an excellent opportunity for the development and usage of such vehicles.

  2. Monitoring Seabirds and Marine Mammals by Georeferenced Aerial Photography

    NASA Astrophysics Data System (ADS)

    Kemper, G.; Weidauer, A.; Coppack, T.

    2016-06-01

    The assessment of anthropogenic impacts on the marine environment is challenged by the accessibility, accuracy and validity of biogeographical information. Offshore wind farm projects require large-scale ecological surveys before, during and after construction, in order to assess potential effects on the distribution and abundance of protected species. The robustness of site-specific population estimates depends largely on the extent and design of spatial coverage and the accuracy of the applied census technique. Standard environmental assessment studies in Germany have so far included aerial visual surveys to evaluate potential impacts of offshore wind farms on seabirds and marine mammals. However, low flight altitudes, necessary for the visual classification of species, disturb sensitive bird species and also hold significant safety risks for the observers. Thus, aerial surveys based on high-resolution digital imagery, which can be carried out at higher (safer) flight altitudes (beyond the rotor-swept zone of the wind turbines) have become a mandatory requirement, technically solving the problem of distant-related observation bias. A purpose-assembled imagery system including medium-format cameras in conjunction with a dedicated geo-positioning platform delivers series of orthogonal digital images that meet the current technical requirements of authorities for surveying marine wildlife at a comparatively low cost. At a flight altitude of 425 m, a focal length of 110 mm, implemented forward motion compensation (FMC) and exposure times ranging between 1/1600 and 1/1000 s, the twin-camera system generates high quality 16 bit RGB images with a ground sampling distance (GSD) of 2 cm and an image footprint of 155 x 410 m. The image files are readily transferrable to a GIS environment for further editing, taking overlapping image areas and areas affected by glare into account. The imagery can be routinely screened by the human eye guided by purpose-programmed software

  3. Induction of trap formation in nematode-trapping fungi by a bacterium.

    PubMed

    Li, Lei; Ma, Mingchuan; Liu, Yongjun; Zhou, Jingwei; Qu, Qing; Lu, Kaiping; Fu, Denggao; Zhang, KeQin

    2011-09-01

    Three soil bacterial strains were identified as Chryseobacterium sp. TFB on the basis of their 16S rRNA gene sequences. Conidia of Arthrobotrys oligospora produced a few mycelial traps (MT) and conidial traps (CT) when cultured with bacterial cells that they did not produce when cultured with a bacterial cell-free culture filtrate. However, co-culture of A. oligospora with bacterial cells and bacteria-free filtrate simultaneously induced MT and CT in large amounts. With the increased concentration of bacteria-free filtrate, the number of typical CT increased, but conidial germination was progressively inhibited. Scanning electron microscopy of A. oligospora co-cultured with bacteria revealed that bacterial attachment to hyphae was a prerequisite to trap formation and that bacteria-free filtrate facilitated bacterial attachments to hyphae. The results that the addition of nutrients in co-culture medium decreased the number of traps suggest that this type of trap formation may be favoured at a low nutrient status. Eight fungi tested were able to form MT and CT when co-cultured with bacterial cells and bacteria-free culture filtrate, but the abilities varied among species. This study provides novel evidence that under laboratory conditions, soil bacteria attaching to hyphae could induce traps in nematode-trapping fungi. PMID:21722172

  4. 2. AERIAL VIEW LOOKING WEST SOUTHWEST SHOWING DOLPHIN MANUFACTURING CO., ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. AERIAL VIEW LOOKING WEST SOUTHWEST SHOWING DOLPHIN MANUFACTURING CO., BARBOUR FLAX SPINNING CO. -- SPRUCE ST. MILL, ROGERS LOCOMOTIVE AND MACHINE WORKS -- MILLWRIGHT SHOP AND FITTING SHOP. - Great Falls S. U. M. Historic District, Oliver Street, Paterson, Passaic County, NJ

  5. 12. AERIAL VIEW OF STATION. Please credit: Louisville and Nashville ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. AERIAL VIEW OF STATION. Please credit: Louisville and Nashville Railroad Company/Family Lines Rail System Archives - Louisville & Nashville Railroad, Union Station, 1000 West Broadway, Louisville, Jefferson County, KY

  6. 14. AERIAL VIEW OF POOL AND STRUCTURES Photocopy of photocopy ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. AERIAL VIEW OF POOL AND STRUCTURES Photocopy of photocopy of 1931 rendering by Alexander, Becker and Schoeppe, architects and engineers - Glen Echo Park, Crystal Swimming Pool, 7300 McArthur Boulevard, Glen Echo, Montgomery County, MD

  7. Aerial view of entire LTA base after completion of both ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Aerial view of entire LTA base after completion of both LTA ship hangars. Date unknown but probably circa 1945. - Marine Corps Air Station Tustin, Northern Lighter Than Air Ship Hangar, Meffett Avenue & Maxfield Street, Tustin, Orange County, CA

  8. Aerial view of construction of both LTA ship hangars (looking ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Aerial view of construction of both LTA ship hangars (looking north) circa 1942. - Marine Corps Air Station Tustin, Northern Lighter Than Air Ship Hangar, Meffett Avenue & Maxfield Street, Tustin, Orange County, CA

  9. Aerial view of reroofing of northern LTA ship hangar, circa ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Aerial view of re-roofing of northern LTA ship hangar, circa 1957. - Marine Corps Air Station Tustin, Northern Lighter Than Air Ship Hangar, Meffett Avenue & Maxfield Street, Tustin, Orange County, CA

  10. 7. Historic aerial photo of rocket engine test facility complex, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Historic aerial photo of rocket engine test facility complex, June 1962. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA GRC photo number C-60674. - Rocket Engine Testing Facility, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

  11. Meteorological influences on mass accountability of aerially applied sprays

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The deposition and drift of aerially applied crop protection materials is influenced by a number of factors including equpment setup and operational parameters, spray material characteristics, and meteorological effects. This work examines the meteorological influences that effect the ultimate fate...

  12. 18. A southeastward aerial view of entire complex. Area east ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. A southeastward aerial view of entire complex. Area east of Cherles Street (behind water tower in view) is not part of this project. - American Chain & Cable Company, East Princess Street (400 Block), York, York County, PA

  13. 49. Photocopy of photograph, AERIAL PHOTOGRAPH SHOWING VIEW OF CNJ ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    49. Photocopy of photograph, AERIAL PHOTOGRAPH SHOWING VIEW OF CNJ BRIDGE PRIOR TO DEVELOPMENT OF PORT ELIZABETH - Central Railroad of New Jersey, Newark Bay Lift Bridge, Spanning Newark Bay, Newark, Essex County, NJ

  14. DETAIL VIEW OF AERIAL TRAM SUPPORT TOWER TWO, WITH TOWERS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL VIEW OF AERIAL TRAM SUPPORT TOWER TWO, WITH TOWERS THREE,FOUR, FIVE AND SIX IN DISTANCE, LOOKING NORTHEAST. - Keane Wonder Mine, Park Route 4 (Daylight Pass Cutoff), Death Valley Junction, Inyo County, CA

  15. 52. CLOSEUP AERIAL VIEW OF THE MERCURY CAPSULE SITTING ON ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    52. CLOSE-UP AERIAL VIEW OF THE MERCURY CAPSULE SITTING ON TOP OF THE REDSTONE ROCKET IN THE TEST STAND. - Marshall Space Flight Center, Redstone Rocket (Missile) Test Stand, Dodd Road, Huntsville, Madison County, AL

  16. AERIAL VIEW OF USS ARIZONA ON THE EAST RIVER IN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AERIAL VIEW OF USS ARIZONA ON THE EAST RIVER IN NEW YORK CITY NEAR BROOKLYN BRIDGE ON HER WAY TO SEA TRIALS. NOTE THE BIRD CAGE TOWERS, 1918. - USS Arizona, Submerged off Ford Island, Pearl Harbor, Honolulu, Honolulu County, HI

  17. 1. AERIAL VIEW, LOOKING SW. CHICAGO & NORTH WESTERN RAILWAY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. AERIAL VIEW, LOOKING SW. CHICAGO & NORTH WESTERN RAILWAY BRIDGE IS IN RAISED POSITION. - Chicago & North Western Railway, Kinzie Street Bridge, Spanning North Branch of Chicago River, South of Kinzie Street, Chicago, Cook County, IL

  18. 5. AERIAL VIEW, LOOKING NE ALONG RAILROAD APPROACH TO CHICAGO. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. AERIAL VIEW, LOOKING NE ALONG RAILROAD APPROACH TO CHICAGO. - Pittsburgh, Fort Wayne & Chicago Railway, Calumet River Bridge, Spanning Calumet River, east of Chicago Skyway (I-90), Chicago, Cook County, IL

  19. 2. AERIAL VIEW, LOOKING NORTH. CHICAGO & NORTH WESTERN RAILWAY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. AERIAL VIEW, LOOKING NORTH. CHICAGO & NORTH WESTERN RAILWAY BRIDGE IS AT BOTTOM OF FRAME. - Chicago & North Western Railway, Kinzie Street Bridge, Spanning North Branch of Chicago River, South of Kinzie Street, Chicago, Cook County, IL

  20. 47. Aerial view of station in 1956, three years after ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    47. Aerial view of station in 1956, three years after the National Park Service (NPS) acquired the grounds. Photographer unknown. - Bodie Island Light Station, Off Highway 12, Nags Head, Dare County, NC

  1. 2. AERIAL VIEW, SHOWING GLENDALE ROAD BRIDGE WITHIN ITS SETTING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. AERIAL VIEW, SHOWING GLENDALE ROAD BRIDGE WITHIN ITS SETTING AT GLENDALE ROAD CROSSING OF DEEP CREEK LAKE (PHOTOGRAPH BY RUTHVAN MORROW) - Glendale Road Bridge, Spanning Deep Creek Lake on Glendale Road, McHenry, Garrett County, MD

  2. 1. AERIAL VIEW, SHOWING GLENDALE ROAD BRIDGE WITHIN ITS SETTING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. AERIAL VIEW, SHOWING GLENDALE ROAD BRIDGE WITHIN ITS SETTING AT GLENDALE ROAD CROSSING OF DEEP CREEK LAKE (PHOTOGRAPH BY RUTHVAN MORROW) - Glendale Road Bridge, Spanning Deep Creek Lake on Glendale Road, McHenry, Garrett County, MD

  3. 14. AERIAL VIEW OF ENGINE DISPLAY INSIDE PASSENGER CAR SHOP ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. AERIAL VIEW OF ENGINE DISPLAY INSIDE PASSENGER CAR SHOP (NOW A TRANSPORTATION MUSEUM) - Baltimore & Ohio Railroad, Mount Clare Passenger Car Shop, Southwest corner of Pratt & Poppleton Streets, Baltimore, Independent City, MD

  4. AERIAL OVERVIEW, LOOKING WEST, WITH FORMER TCIUS STEEL WORKER HOUSES ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AERIAL OVERVIEW, LOOKING WEST, WITH FORMER TCI-US STEEL WORKER HOUSES ALONG AVENUES G, H, I AND J AND MORGAN ROAD (BOTTOM, RUNNING LEFT TO RIGHT). - Muscoda Red Ore Mining Community, Bessemer, Jefferson County, AL

  5. 1. AERIAL VIEW LOOKING SOUTHWEST (OLD HARVARD STREET BRIDGE AT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. AERIAL VIEW LOOKING SOUTHWEST (OLD HARVARD STREET BRIDGE AT LEFT, NEW BRIDGE AT RIGHT) - Old Harvard Street Bridge, Spanning Rock Creek at National Zoological Park, Washington, District of Columbia, DC

  6. 80. PHOTOCOPY OF 1976 AERIAL PHOTO OF BULLFROG MINE. From ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    80. PHOTOCOPY OF 1976 AERIAL PHOTO OF BULLFROG MINE. From National Park Service Environmental Review and Analysis, Bullfrog Mine Plan of Operations, Death Valley Nat'l Monument (24 March 1976) - Bullfrog Mine, Rhyolite, Nye County, NV

  7. 81. PHOTOCOPY OF 1978 AERIAL PHOTO OF BULLFROG MINE. From ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    81. PHOTOCOPY OF 1978 AERIAL PHOTO OF BULLFROG MINE. From National Park Service Environmental Review and Analysis, BullfroG Mine Plan of Operations, Death Valley Nat'l Monument (24 August 1978) - Bullfrog Mine, Rhyolite, Nye County, NV

  8. 3. AERIAL VIEW OF THREE BEARS LAKE, SHOWING OUTLET STREAM, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. AERIAL VIEW OF THREE BEARS LAKE, SHOWING OUTLET STREAM, BURLINGTON NORTHERN TRACKS, AND U.S. HIGHWAY 2, LOOKING NORTHEAST - Three Bears Lake & Dams, North of Marias Pass, East Glacier Park, Glacier County, MT

  9. 1. NORTHWEST OBLIQUE AERIAL VIEW OF FORT DELAWARE AND PEA ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. NORTHWEST OBLIQUE AERIAL VIEW OF FORT DELAWARE AND PEA PATCH ISLAND. REMAINS OF SEA WALL VISIBLE IN FOREGROUND AND RIGHT OF IMAGE. - Fort Delaware, Sea Wall, Pea Patch Island, Delaware City, New Castle County, DE

  10. NORTHWEST OBLIQUE AERIAL VIEW OF FORT DELAWARE AND PEA PATCH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    NORTHWEST OBLIQUE AERIAL VIEW OF FORT DELAWARE AND PEA PATCH ISLAND. REMAINS OF SEA WALL VISIBLE IN FOREGROUND AND RIGHT OF IMAGE - Fort Delaware, Pea Patch Island, Delaware City, New Castle County, DE

  11. 1. AERIAL VIEW, LOOKING WEST ALONG NORTH AVENUE. BRIDGE No. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. AERIAL VIEW, LOOKING WEST ALONG NORTH AVENUE. BRIDGE No. Z-2 AT CENTER LEFT OF FRAME. - Chicago, Milwaukee & St. Paul Railway, Bridge No. Z-2, Spanning North Branch Canal at North Cherry Avenue, Chicago, Cook County, IL

  12. 3. CONTEXTUAL AERIAL VIEW OF BRIDGE IN SETTING, LOOKING EASTSOUTHEAST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. CONTEXTUAL AERIAL VIEW OF BRIDGE IN SETTING, LOOKING EAST-SOUTHEAST FROM DOWNSTREAM - Chili Bar Bridge, Spanning South Fork of American River at State Highway 193, Placerville, El Dorado County, CA

  13. Ontogeny of aerial righting and wing flapping in juvenile birds.

    PubMed

    Evangelista, Dennis; Cam, Sharlene; Huynh, Tony; Krivitskiy, Igor; Dudley, Robert

    2014-08-01

    Mechanisms of aerial righting in juvenile chukar partridge (Alectoris chukar) were studied from hatching to 14 days-post-hatching (dph). Asymmetric movements of the wings were used from 1 to 8 dph to effect progressively more successful righting behaviour via body roll. Following 8 dph, wing motions transitioned to bilaterally symmetric flapping that yielded aerial righting via nose-down pitch, along with substantial increases in vertical force production during descent. Ontogenetically, the use of such wing motions to effect aerial righting precedes both symmetric flapping and a previously documented behaviour in chukar (i.e. wing-assisted incline running) hypothesized to be relevant to incipient flight evolution in birds. These findings highlight the importance of asymmetric wing activation and controlled aerial manoeuvres during bird development and are potentially relevant to understanding the origins of avian flight. PMID:25165451

  14. 77 FR 36250 - Information Collection Request; Request for Aerial Photography

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-18

    ... technological collection techniques or other forms of information technology. All comments received in response... disabilities who require alternative mean for communication (Braille, large print, audio tape, etc.) should...; ] DEPARTMENT OF AGRICULTURE Farm Service Agency Information Collection Request; Request for Aerial...

  15. Analysis of Operation PLUMBBOB nuclear test smoky aerial radiological data

    SciTech Connect

    Steadman, C.R. Jr.; Kennedy, N.C.; Quinn, V.E.

    1984-03-01

    This report describes the Weather Service Nuclear Support Office (WSNSO) analysis of the aerial radiological data collected following the SMOKY nuclear test of Operation PLUMBBOB. The methods of converting these aerial data to exposure rates compatible with those measured by ground-level monitors are discussed. A fallout pattern, based upon the resulting aerial exposure-rate values, is presented for the downwind area where no ground-level exposure-rate measurements were made. This WSNSO extended fallout pattern is compared with a similar analysis prepared in the late 1950s. An evaluation of the enhanced fallout areas shown in the extended pattern is made. The appendices contain discussions of the aerial data collection and analysis procedures, and contain tabulated radiological data used in the extended fallout pattern analysis. 7 references, 6 figures, 3 tables.

  16. 22. Photographer unknown, 1956 AERIAL VIEW, LOOKING SOUTHSOUTHEAST, BUILDING 20 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. Photographer unknown, 1956 AERIAL VIEW, LOOKING SOUTH-SOUTHEAST, BUILDING 20 AT LEFT. DARK AREAS ARE LANDSCAPED. - U. S. Veterans Administration Medical Center, 2100 Ridgecrest Southeast, Albuquerque, Bernalillo County, NM

  17. 25. CONSTRUCTION PROGRESS AERIAL VIEW OF WASTE CALCINING FACILITY TAKEN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    25. CONSTRUCTION PROGRESS AERIAL VIEW OF WASTE CALCINING FACILITY TAKEN WHEN STRUCTURE WAS 99 PERCENT COMPLETE. INEEL PHOTO NUMBER NRTS-60-5409. - Idaho National Engineering Laboratory, Old Waste Calcining Facility, Scoville, Butte County, ID

  18. 26. AERIAL VIEW OF WASTE CALCINING FACILITY WITH SOLIDS STORAGE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. AERIAL VIEW OF WASTE CALCINING FACILITY WITH SOLIDS STORAGE FACILITY BEHIND. CAMERA FACING EAST. INEEL PHOTO NUMBER PHOTO 72-4571. - Idaho National Engineering Laboratory, Old Waste Calcining Facility, Scoville, Butte County, ID

  19. AERIAL VIEW, LOOKING EAST TOWARDS TCIUS STEEL, ENSLEY WORKS OPEN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AERIAL VIEW, LOOKING EAST TOWARDS TCI-US STEEL, ENSLEY WORKS OPEN HEARTH IN BACKGROUND. - Tennessee Coal & Iron Company, Ensley Works, West of residential & commercial districts, Birmingham, Jefferson County, AL

  20. AERIAL VIEW, LOOKING SOUTH WEST, BIRMINGPORT ROAD AND DON DRENNEN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AERIAL VIEW, LOOKING SOUTH WEST, BIRMINGPORT ROAD AND DON DRENNEN OVERPASS IN FOREGROUND, TCI-US STEEL ENSLEY WORKS OPEN HEARTH (RUINS) IN THE BACKGROUND. - Tennessee Coal & Iron Company, Ensley Works, West of residential & commercial districts, Birmingham, Jefferson County, AL

  1. 72. Frank Deras Jr., Photographer May 1998 CONTEXTUAL AERIAL VIEW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    72. Frank Deras Jr., Photographer May 1998 CONTEXTUAL AERIAL VIEW OF TRANSBAY TERMINAL BUS LOOP, FACING NORTHEAST. - San Francisco Oakland Bay Bridge, Spanning San Francisco Bay, San Francisco, San Francisco County, CA

  2. 29. Oblique Aerial View of North Plant, Looking North, Showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    29. Oblique Aerial View of North Plant, Looking North, Showing Powerhouse in Left Center and 1929 Bridge in Right Center (undated) - Atwater Kent Manufacturing Company, North Plant, 5000 Wissahickon Avenue, Philadelphia, Philadelphia County, PA

  3. 27. Oblique Aerial View of North and South Plants, Looking ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    27. Oblique Aerial View of North and South Plants, Looking East, with Powerhouse in Center Foreground (undated) - Atwater Kent Manufacturing Company, North Plant, 5000 Wissahickon Avenue, Philadelphia, Philadelphia County, PA

  4. 262. Frank Deras Jr., Photographer June 1998 AERIAL VIEW OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    262. Frank Deras Jr., Photographer June 1998 AERIAL VIEW OF CANTILEVER TRUSS CANTILEVER ARM AND SUSPENDED SPAN, NORTH SIDE, FACING SOUTH. - San Francisco Oakland Bay Bridge, Spanning San Francisco Bay, San Francisco, San Francisco County, CA

  5. 15. AERIAL PHOTOGRAPH OF DAM SITE SHOWING SPILLWAY OGEE SECTION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. AERIAL PHOTOGRAPH OF DAM SITE SHOWING SPILLWAY OGEE SECTION AND SPILLWAY APRON EXCAVATION IN FOREGROUND.... Volume XVIII, No. 10, January 18, 1940. - Prado Dam, Spillway, Santa Ana River near junction of State Highways 71 & 91, Corona, Riverside County, CA

  6. 6. EASTERLY AERIAL VIEW SHOWING THE RIGHT ABUTMENT AND OUTLET ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. EASTERLY AERIAL VIEW SHOWING THE RIGHT ABUTMENT AND OUTLET CONTROL WORKS IN THE FOREGROUND.... Volume XX, No. 8, September 9, 1940. - Prado Dam, Santa Ana River near junction of State Highways 71 & 91, Corona, Riverside County, CA

  7. 13. AERIAL VIEW SHOWING IN THE FOREGROUND, EXCAVATION FOR THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. AERIAL VIEW SHOWING IN THE FOREGROUND, EXCAVATION FOR THE SPILLWAY APRON.... Volume XVII, No. 12, December 26, 1939. - Prado Dam, Spillway, Santa Ana River near junction of State Highways 71 & 91, Corona, Riverside County, CA

  8. 21. AERIAL VIEW OF THE OUTLET STRUCTURE AND OUTLET CHANNEL, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. AERIAL VIEW OF THE OUTLET STRUCTURE AND OUTLET CHANNEL, LOOKING UPSTREAM.... Volume XVII, No. 11, December 26, 1939. - Prado Dam, Outlet Works, Santa Ana River near junction of State Highways 71 & 91, Corona, Riverside County, CA

  9. 4. AERIAL VIEW OF DAM SITE SHOWING OUTLET WORKS AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. AERIAL VIEW OF DAM SITE SHOWING OUTLET WORKS AND DIVERSION CHANNEL IN FOREGROUND.... Volume XVIII, No. 9, March 5, 1940. - Prado Dam, Santa Ana River near junction of State Highways 71 & 91, Corona, Riverside County, CA

  10. 1. AERIAL VIEW OF THE PATH TRANSIT SYSTEM BRIDGE, LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. AERIAL VIEW OF THE PATH TRANSIT SYSTEM BRIDGE, LOOKING NORTHEAST. THE CONRAIL BRIDGE (HAER No. NJ-43) AND THE NEWARK TURNPIKE ARE VISIBLE IN THE BACKGROUND - Path Transit System Bridge, Spanning Hackensack River, Kearny, Hudson County, NJ

  11. 4. AERIAL PERSPECTIVE SHOWING MAJORITY OF SOUTH ELEVATION, LOOKING NORTH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. AERIAL PERSPECTIVE SHOWING MAJORITY OF SOUTH ELEVATION, LOOKING NORTH - Central of Georgia Railway, Bay Street Viaduct, U.S. 17 & Bay Street, spanning Central of Georgia Railroad, Savannah, Chatham County, GA

  12. AERIAL VIEW, LOOKING NORTH NORTHWEST, OF ARRASTRA GULCH, WITH SILVER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AERIAL VIEW, LOOKING NORTH NORTHWEST, OF ARRASTRA GULCH, WITH SILVER LAKE IN FOREGROUND. NOTE SILVER LAKE MINE AND MILL RUINS ON FAR SHORE. - Shenandoah-Dives Mill, 135 County Road 2, Silverton, San Juan County, CO

  13. AERIAL VIEW, LOOKING NORTH, OF SILVER LAKE. NOTE IOWA MINE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AERIAL VIEW, LOOKING NORTH, OF SILVER LAKE. NOTE IOWA MINE RUINS AT LEFT CENTER AND SILVER LAKE MINE RUINS BEYOND NORTHWEST SHORE. - Shenandoah-Dives Mill, 135 County Road 2, Silverton, San Juan County, CO

  14. 208. AERIAL VIEW OF POTOMAC AND AREA TO BE FILLED ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    208. AERIAL VIEW OF POTOMAC AND AREA TO BE FILLED WITH DREDGING OPERATION IN LOWER RIGHT CORNER, 1930. - George Washington Memorial Parkway, Along Potomac River from McLean to Mount Vernon, VA, Mount Vernon, Fairfax County, VA

  15. 2. AERIAL VIEW LOOKING EAST FROM ABOVE THE POTOMAC RIVER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. AERIAL VIEW LOOKING EAST FROM ABOVE THE POTOMAC RIVER OVER THE LINCOLN MEMORIAL AND REFLECTING POOL TO THE WASHINGTON MONUMENT AND THE MALL BEYOND. - West Potomac Park, Washington, District of Columbia, DC

  16. 5. AERIAL VIEW, LOOKING NORTH, OF BUILDING 371 AFTER CONSTRUCTION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. AERIAL VIEW, LOOKING NORTH, OF BUILDING 371 AFTER CONSTRUCTION WAS COMPLETED. (11/7/78) - Rocky Flats Plant, Plutonium Recovery Facility, Northwest portion of Rocky Flats Plant, Golden, Jefferson County, CO

  17. Unmanned Aerial Vehicle Systems for Disaster Relief: Tornado Alley

    NASA Technical Reports Server (NTRS)

    DeBusk, Wesley M.

    2009-01-01

    Unmanned aerial vehicle systems are currently in limited use for public service missions worldwide. Development of civil unmanned technology in the United States currently lags behind military unmanned technology development in part because of unresolved regulatory and technological issues. Civil unmanned aerial vehicle systems have potential to augment disaster relief and emergency response efforts. Optimal design of aerial systems for such applications will lead to unmanned vehicles which provide maximum potentiality for relief and emergency response while accounting for public safety concerns and regulatory requirements. A case study is presented that demonstrates application of a civil unmanned system to a disaster relief mission with the intent on saving lives. The concept utilizes unmanned aircraft to obtain advanced warning and damage assessments for tornados and severe thunderstorms. Overview of a tornado watch mission architecture as well as commentary on risk, cost, need for, and design tradeoffs for unmanned aerial systems are provided.

  18. GENERAL AERIAL VIEW OF LAKE ALDWELL AND ELWHA DAM AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    GENERAL AERIAL VIEW OF LAKE ALDWELL AND ELWHA DAM AND POWERHOUSE, WITH STRAIT OF JUAN DE FUCA TO THE NORTH. PHOTO BY JET LOWE, HAER, 1995. - Elwha River Hydroelectric System, Elwha Hydroelectric Dam & Plant, Port Angeles, Clallam County, WA

  19. AERIAL PHOTO OF ELWHA RIVER, SPILLWAYS AT GLINES DAM, POWERHOUSE, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AERIAL PHOTO OF ELWHA RIVER, SPILLWAYS AT GLINES DAM, POWERHOUSE, SURGE TANK AND TRANSFORMER YARD WITH HISTORIC SHED (WAREHOUSE). PHOTO BY JET LOWE, HAER, 1995. - Elwha River Hydroelectric System, Glines Hydroelectric Dam & Plant, Port Angeles, Clallam County, WA

  20. GENERAL AERIAL VIEW, LOOKING SOUTH, AT GLINES DAM AND POWERHOUSE, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    GENERAL AERIAL VIEW, LOOKING SOUTH, AT GLINES DAM AND POWERHOUSE, LAKE MILLS RESERVOIR, AND THE ELWHA RIVER. PHOTO BY JET LOWE, HAER, 1995. - Elwha River Hydroelectric System, Glines Hydroelectric Dam & Plant, Port Angeles, Clallam County, WA

  1. AERIAL PHOTO, LOOKING SOUTH, SHOWING POWERHOUSE, SURGE TANK, TRANSFORMER YARD, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AERIAL PHOTO, LOOKING SOUTH, SHOWING POWERHOUSE, SURGE TANK, TRANSFORMER YARD, GLINES DAM, AND LAKE MILLS RESERVOIR. PHOTO BY JET LOWE, HAER, 1995. - Elwha River Hydroelectric System, Glines Hydroelectric Dam & Plant, Port Angeles, Clallam County, WA

  2. GENERAL AERIAL VIEW OF NORTH END OF LAKE ALDWELL (RESERVOIR) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    GENERAL AERIAL VIEW OF NORTH END OF LAKE ALDWELL (RESERVOIR) WITH ELWHA DAM AND POWERHOUSE. PHOTO BY JET LOWE, HAER, 1995. - Elwha River Hydroelectric System, Elwha Hydroelectric Dam & Plant, Port Angeles, Clallam County, WA

  3. GENERAL AERIAL VIEW TO SOUTH OF ELWHA DAM AND POWERHOUSE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    GENERAL AERIAL VIEW TO SOUTH OF ELWHA DAM AND POWERHOUSE WITH NORTH END OF RESERVOIR. PHOTO BY JET LOWE, HAER, 1995. - Elwha River Hydroelectric System, Elwha Hydroelectric Dam & Plant, Port Angeles, Clallam County, WA

  4. 3. AERIAL VIEW SHOWING THE ENTIRE BRIDGE FROM EAST CABLE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. AERIAL VIEW SHOWING THE ENTIRE BRIDGE FROM EAST CABLE ANCHORAGE (EXTREME LEFT) TO WEST CABLE ANCHORAGE (UPPER RIGHT CORNER). March 1987. - Verde River Sheep Bridge, Spanning Verde River (Tonto National Forest), Cave Creek, Maricopa County, AZ

  5. 50. AERIAL VIEW OF THE SOUTH END OF ALEXANDRIA LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    50. AERIAL VIEW OF THE SOUTH END OF ALEXANDRIA LOOKING NORTH. (WASHINGTON ST.) - George Washington Memorial Parkway, Along Potomac River from McLean to Mount Vernon, VA, Mount Vernon, Fairfax County, VA

  6. 67. AERIAL VIEW OF WATERFOWL SANCTUARY WITH INTERSTATE 395 LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    67. AERIAL VIEW OF WATERFOWL SANCTUARY WITH INTERSTATE 395 LOOKING NORTHEAST INTO WASHINGTON D.C. - George Washington Memorial Parkway, Along Potomac River from McLean to Mount Vernon, VA, Mount Vernon, Fairfax County, VA

  7. 4. AERIAL VIEW OF MT. VERNON TERMINUS, SOUTHERN TERMINUS OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. AERIAL VIEW OF MT. VERNON TERMINUS, SOUTHERN TERMINUS OF GEORGE WASHINGTON MEMORIAL PARKWAY (GWMP), LOOKING SOUTHEAST. - George Washington Memorial Parkway, Along Potomac River from McLean to Mount Vernon, VA, Mount Vernon, Fairfax County, VA

  8. 2. AERIAL VIEW OF THE WEST GROUNDS OF THE CAPITOL, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. AERIAL VIEW OF THE WEST GROUNDS OF THE CAPITOL, UNION PLAZA AND REFLECTING POOL AND THE BOTANIC GARDENS, LOOKING NORTH FROM OVER FIRST STREET, SW. - National Mall & Monument Grounds, Washington, District of Columbia, DC

  9. Precision aerial application for site-specific rice crop management

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Precision agriculture includes different technologies that allow agricultural professional to use information management tools to optimize agriculture production. The new technologies allow aerial application applicators to improve application accuracy and efficiency, which saves time and money for...

  10. 13. AERIAL OF FORT SHERIDAN LOOKING NORTH TOWARD THE WATER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. AERIAL OF FORT SHERIDAN LOOKING NORTH TOWARD THE WATER TOWER (Copy negative made from negative by TASO, U.S. Army, Fort Sheridan, Illinois). - Fort Sheridan, 25 miles Northeast of Chicago, on Lake Michigan, Lake Forest, Lake County, IL

  11. Historic Image: Aerial view of cemetery and its environs. Photograph ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Historic Image: Aerial view of cemetery and its environs. Photograph 2 November 1961. NCA History Collection - Cypress Hills National Cemetery, Jamaica Avenue Unit, 625 Jamaica Avenue, Brooklyn, Kings County, NY

  12. Aerial view showing US 93, Switchyards, Visitor Center Parking Garage, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Aerial view showing US 93, Switchyards, Visitor Center Parking Garage, Hoover Dam, and Colorado River Canyon in Nevada - Hoover Dam, Spanning Colorado River at Route 93, Boulder City, Clark County, NV

  13. AERIAL VIEW, LOOKING SOUTH, OF SHENANDOAHDIVES (MAYFLOWER) MINE PORTAL, IN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AERIAL VIEW, LOOKING SOUTH, OF SHENANDOAH-DIVES (MAYFLOWER) MINE PORTAL, IN SHADOW AT WIDENED END OF ROAD, THREE-EIGHTHS FROM THE BOTTOM. - Shenandoah-Dives Mill, 135 County Road 2, Silverton, San Juan County, CO

  14. DETAIL TOP VIEW OF AERIAL TRAMWAY DRIVE MECHANISM, LOOKING NORTHEAST. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL TOP VIEW OF AERIAL TRAMWAY DRIVE MECHANISM, LOOKING NORTHEAST. THE FRICTION BRAKING SYSTEM CAN BE SEEN IN SHADOW ABOVE THE LARGE CABLE WHEEL BELOW. - Keane Wonder Mine, Park Route 4 (Daylight Pass Cutoff), Death Valley Junction, Inyo County, CA

  15. 3. AERIAL VIEW OF PIER, LOOKING SOUTHWEST, WITH INTERSECTION OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. AERIAL VIEW OF PIER, LOOKING SOUTHWEST, WITH INTERSECTION OF PACIFIC COAST HIGHWAY AND MAIN STREET IN FOREGROUND - Huntington Beach Municipal Pier, Pacific Coast Highway at Main Street, Huntington Beach, Orange County, CA

  16. 1. AERIAL VIEW, LOOKING NORTH, FROM RED MOUNTAIN TO USX ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. AERIAL VIEW, LOOKING NORTH, FROM RED MOUNTAIN TO USX FAIRFIELD WORKS (TOP LEFT) WITH WENONAH SINTERING PLANT (BOTTOM CENTER) AND WENONAH COMMUNITY (CENTER RIGHT). - High Line Railroad, From Red Mountain to Fairfield Works, Birmingham, Jefferson County, AL

  17. Aerial view of old station and sand dunes looking east ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Aerial view of old station and sand dunes looking east from tower of newer station. - Vermilion Life Saving Station, Shore of Lake Superior, 10 miles west of Whitefish Point, Paradise, Chippewa County, MI

  18. Aerial overview of the Denver International Airport site, looking southwest ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Aerial overview of the Denver International Airport site, looking southwest - Denver International Airport Site, Between Fifty-sixth & 128th Avenues, Buckley Road & Box Elder Creek, Denver, Denver County, CO

  19. 1. AERIAL VIEW, SHOWING MOBILE LAUNCHER. BASE IS CALLED LAUNCH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. AERIAL VIEW, SHOWING MOBILE LAUNCHER. BASE IS CALLED LAUNCH PLATFORM AND TOWER ON RIGHT IS CALLED LAUNCH UMBILICAL TOWER, (LUT). - Mobile Launcher One, Kennedy Space Center, Titusville, Brevard County, FL

  20. 2. AERIAL VIEW, LOOKING SW. TIP OF GOOSE ISLAND AT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. AERIAL VIEW, LOOKING SW. TIP OF GOOSE ISLAND AT TOP LEFT OF FRAME. - Chicago, Milwaukee & St. Paul Railway, Bridge No. Z-2, Spanning North Branch Canal at North Cherry Avenue, Chicago, Cook County, IL

  1. 16. AERIAL VIEW OF GOOSE ISLAND, LOOKING SOUTH, CIRCA 1960. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. AERIAL VIEW OF GOOSE ISLAND, LOOKING SOUTH, CIRCA 1960. BRIDGE No. Z-2 AT LOWER LEFT OF FRAME. - Chicago, Milwaukee & St. Paul Railway, Bridge No. Z-2, Spanning North Branch Canal at North Cherry Avenue, Chicago, Cook County, IL

  2. 3. AERIAL VIEW, LOOKING ESE. TIP OF GOOSE ISLAND AT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. AERIAL VIEW, LOOKING ESE. TIP OF GOOSE ISLAND AT TOP RIGHT OF FRAME. - Chicago, Milwaukee & St. Paul Railway, Bridge No. Z-2, Spanning North Branch Canal at North Cherry Avenue, Chicago, Cook County, IL

  3. HISTORIC IMAGE: AERIAL VIEW OF CEMETERY AND ITS ENVIRONS. PHOTOGRAPH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    HISTORIC IMAGE: AERIAL VIEW OF CEMETERY AND ITS ENVIRONS. PHOTOGRAPH 15 SEPTEMBER 1950. NCA HISTORY COLLECTION. - San Francisco National Cemetery, 1 Lincoln Boulevard, San Francisco, San Francisco County, CA

  4. 129. FULL AERIAL VIEW SHOWING FORWARD PORT QUARTER, ENTERING PEARL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    129. FULL AERIAL VIEW SHOWING FORWARD PORT QUARTER, ENTERING PEARL HARBOR AFTER APOLLO 11 RECOVERY. 26 JULY 1969. (NATIONAL ARCHIVES NO. 428-KN-18090) - U.S.S. HORNET, Puget Sound Naval Shipyard, Sinclair Inlet, Bremerton, Kitsap County, WA

  5. 1. AERIAL SHOT HANGARS 14 (IN CENTER OF VIEW), WEST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. AERIAL SHOT HANGARS 1-4 (IN CENTER OF VIEW), WEST FACING, SIDE LOOKING EAST. BUILDING 100 IS IN FOREGROUND. - Hill Field, Airplane Repair Hangars No. 1-No. 4, 5875 Southgate Avenue, Layton, Davis County, UT

  6. 2. AERIAL SHOT HANGARS 14 (IN CENTER OF VIEW), SOUTH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. AERIAL SHOT HANGARS 1-4 (IN CENTER OF VIEW), SOUTH AND WEST FACING SIDES. BUILDING 238 IS IN LOWER RIGHT FOREGROUND. - Hill Field, Airplane Repair Hangars No. 1-No. 4, 5875 Southgate Avenue, Layton, Davis County, UT

  7. 15. AERIAL VIEW, LOOKING NORTH, OF PORT AUTHORITY GRAIN TERMINAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. AERIAL VIEW, LOOKING NORTH, OF PORT AUTHORITY GRAIN TERMINAL AND COLUMBIA STREET PIER, June 25, 1950. (Original negative GT-895) - New York Barge Canal, Gowanus Bay Terminal Pier, East of bulkhead supporting Columbia Street, Brooklyn, Kings County, NY

  8. 70. AERIAL VIEW OF ROUTE 110 WITH PENTAGON AND PARKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    70. AERIAL VIEW OF ROUTE 110 WITH PENTAGON AND PARKING AREA LOOKING SOUTHEAST.(EXPRESSWAY V.S. PARKWAY) - George Washington Memorial Parkway, Along Potomac River from McLean to Mount Vernon, VA, Mount Vernon, Fairfax County, VA

  9. 11. COPY OF 1970 AERIAL PHOTOGRAPH OF LORING AIR FORCE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. COPY OF 1970 AERIAL PHOTOGRAPH OF LORING AIR FORCE BASE. PHOTOGRAPH LOCATED AT AIR FORCE BASE CONVERSION AGENCY, LORING AIR FORCE BASE, MAINE. - Loring Air Force Base, Airfield, Central portion of base, Limestone, Aroostook County, ME

  10. 1. AERIAL VIEW SHOWING ARCHEOLOGICAL EXCAVATIONS OF LOCOMOTIVE PITS IN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. AERIAL VIEW SHOWING ARCHEOLOGICAL EXCAVATIONS OF LOCOMOTIVE PITS IN FORMER ERECTING SHOP. MACHINE SHOP IS BUILDING AT RIGHT. - Grant Locomotive Works, Market & Spruce Streets, Paterson, Passaic County, NJ

  11. 2. CLOSE IN AERIAL VIEW OF ARCHEOLOGICAL EXCAVATIONS OF LOCOMOTIVE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. CLOSE IN AERIAL VIEW OF ARCHEOLOGICAL EXCAVATIONS OF LOCOMOTIVE PITS IN FORMER ERECTING SHOP. MACHINE SHOP IS BUILDING AT RIGHT. - Grant Locomotive Works, Market & Spruce Streets, Paterson, Passaic County, NJ

  12. 8. AERIAL VIEW LOOKING NORTH NORTHWEST SHOWING SALVAGE ARCHAELOGY TRENCH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. AERIAL VIEW LOOKING NORTH NORTHWEST SHOWING SALVAGE ARCHAELOGY TRENCH AND GRANT LOCOMOTIVE WORKS ERECTING SHOP - ARCHEOLOGICAL EXCAVATION IN BACKGROUND. - Rogers Locomotive & Machine Works, Spruce & Market Streets, Paterson, Passaic County, NJ

  13. 1. AERIAL VIEW SHOWING AQUEDUCT RIGHTOFWAY, WITH WASTE WEIR VISIBLE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. AERIAL VIEW SHOWING AQUEDUCT RIGHT-OF-WAY, WITH WASTE WEIR VISIBLE IN BACKGROUND. - Old Croton Aqueduct, Mill River Waste Weir, U.S. Route 9 at Sleepy Hollow Cemetery, Tarrytown, Westchester County, NY

  14. 2. Photocopy of aerial view of the museum, taken October ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. Photocopy of aerial view of the museum, taken October 26, 1966. Original photo in possession of the Philadelphia Museum of Art. - Philadelphia Museum of Art, Benjamin Franklin Parkway, Philadelphia, Philadelphia County, PA

  15. 14. Photocopy, AERIAL VIEW OF FORT TOTTEN, photographed in the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. Photocopy, AERIAL VIEW OF FORT TOTTEN, photographed in the 1970s. Original photograph at North Dakota National Guard - Fort Totten, 12 miles southwest of Devils Lake City off Route 57, Devils Lake, Ramsey County, ND

  16. 180. Frank Deras Jr., Photographer June 1998 AERIAL ELEVATION VIEW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    180. Frank Deras Jr., Photographer June 1998 AERIAL ELEVATION VIEW OF SUSPENSION BRIDGE AT CABLE VALLEY WITH SAN FRANCISCO IN BACKGROUND, FACING WEST NORTHWEST. - San Francisco Oakland Bay Bridge, Spanning San Francisco Bay, San Francisco, San Francisco County, CA

  17. 175. Frank Deras Jr., Photographer May 1998 AERIAL ELEVATION VIEW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    175. Frank Deras Jr., Photographer May 1998 AERIAL ELEVATION VIEW OF TOWER W-2, FACING NORTHWEST. - San Francisco Oakland Bay Bridge, Spanning San Francisco Bay, San Francisco, San Francisco County, CA

  18. 179. Dennis Hill, Photographer June 1998 AERIAL ELEVATION VIEW OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    179. Dennis Hill, Photographer June 1998 AERIAL ELEVATION VIEW OF SUSPENSION BRIDGE STIFFENING TRUSS AND TOWER W-2, FACING NORTHWEST. - San Francisco Oakland Bay Bridge, Spanning San Francisco Bay, San Francisco, San Francisco County, CA

  19. East wall, showing rails of a halfton aerial gantry attached ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    East wall, showing rails of a half-ton aerial gantry attached to roof frame - Bureau of Mines Metallurgical Research Laboratory, Original Building, Date Street north of U.S. Highway 93, Boulder City, Clark County, NV

  20. 45. HISTORIC AERIAL VIEW LOOKING SOUTHWEST AT THE TEST STAND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    45. HISTORIC AERIAL VIEW LOOKING SOUTHWEST AT THE TEST STAND AND THE SURROUNDING ELECTRONICS AND EQUIPMENT TRAILERS. - Marshall Space Flight Center, Redstone Rocket (Missile) Test Stand, Dodd Road, Huntsville, Madison County, AL

  1. 5. AERIAL VIEW LOOKING NORTH SHOWING PHILADELPHIA MUSEUM OF ART, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. AERIAL VIEW LOOKING NORTH SHOWING PHILADELPHIA MUSEUM OF ART, SITE OF FORMER MAIN STORAGE RESERVOIR - Fairmount Waterworks, East bank of Schuylkill River, Aquarium Drive, Philadelphia, Philadelphia County, PA

  2. 1. AERIAL VIEW LOOKING SOUTHEAST, SHOWING WATER WORKS SITE AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. AERIAL VIEW LOOKING SOUTHEAST, SHOWING WATER WORKS SITE AND PHILADELPHIA MUSEUM OF ART ON HILL ABOVE - Fairmount Waterworks, East bank of Schuylkill River, Aquarium Drive, Philadelphia, Philadelphia County, PA

  3. F/A-18 Automated Aerial Refueling (AAR) Phase 1

    NASA Video Gallery

    Engineers at NASA's Dryden Flight Research Center are evaluating the capability of an F/A-18A aircraft as an in-flight refueling tanker to develop analytical models for an automated aerial refuelin...

  4. AERIAL VIEW LOOKING FURTHER SOUTH EAST, VILLAGE CREEK WATER TREATMENT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AERIAL VIEW LOOKING FURTHER SOUTH EAST, VILLAGE CREEK WATER TREATMENT PLANT ON RIGHT SIDE, ENSLEY IN BACKGROUND. - Birmingham Southern Railroad Yard, Thirty-fourth Street, Ensley, Jefferson County, AL

  5. Bureau of Aeronautics, October 16, 1943, Photograph #4875. AERIAL OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Bureau of Aeronautics, October 16, 1943, Photograph #4875. AERIAL OF ROOSEVELT BASE LOOKING EAST - Roosevelt Base, Bounded by Ocean Boulevard, Pennsylvania Avenue, Richardson Avenue, & Idaho Street, Long Beach, Los Angeles County, CA

  6. 63. Aerial view of SAC command post construction, looking west ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    63. Aerial view of SAC command post construction, looking west - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

  7. 67. Aerial view of SAC command post, building 500, looking ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    67. Aerial view of SAC command post, building 500, looking northeast, undated - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

  8. 62. Aerial view of SAC command post, building 500, looking ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    62. Aerial view of SAC command post, building 500, looking east - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

  9. 68. Aerial view of SAC command post, building 500, looking ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    68. Aerial view of SAC command post, building 500, looking northeast, spring, 1957 - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

  10. AERIAL OVERVIEW, LOOKING NORTH, WITH FORMER TCIUS STEEL ORE MINE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AERIAL OVERVIEW, LOOKING NORTH, WITH FORMER TCI-US STEEL ORE MINE HEADQUARTERS (BOTTOM) AND SUPERINTENDENT'S AND FOREMAN HOUSING ALONG MINNESOTA AVENUE AT CREST OF RED MOUNTAIN (TOP LEFT). - Muscoda Red Ore Mining Community, Bessemer, Jefferson County, AL

  11. 21. AERIAL VIEW, LOOKING NORTH UP MEETING STREET FROM THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. AERIAL VIEW, LOOKING NORTH UP MEETING STREET FROM THE INTERSECTION OF MEETING AND BROAD STREETS (FOUR CORNERS--ST. MICHAEL'S EPISCOPAL CHURCH, FIREPROOF BUILDING, COURTHOUSE, U.S. POST OFFICE). - City Plan of Charleston, Charleston, Charleston County, SC

  12. 25. AERIAL VIEW, LOOKING WEST OVER THE INTERSECTION OF MEETING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    25. AERIAL VIEW, LOOKING WEST OVER THE INTERSECTION OF MEETING AND TRADD STREETS WITH THE NATHANIEL RUSSELL HOUSE AND THE FIRST SCOTT PRESBYTERIAN CHURCH AS LANDMARKS ALONG MEETING STREET. - City Plan of Charleston, Charleston, Charleston County, SC

  13. 33. VIEW TO SOUTHEAST. AERIAL VIEW OF AREA DURING FLOOD ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. VIEW TO SOUTHEAST. AERIAL VIEW OF AREA DURING FLOOD STAGE. GIANELLA BRIDGE AT UPPER RIGHT Photographer unknown, January 24, 1970 - Gianella Bridge, Spanning Sacramento River at State Highway 32, Hamilton City, Glenn County, CA

  14. Historic Image: Aerial view of Mount of Victory Plot. Photograph ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Historic Image: Aerial view of Mount of Victory Plot. Photograph 1961. NCA History Collection - Cypress Hills National Cemetery, Mount of Victory Plot Unit, 625 Jamaica Avenue, Brooklyn, Kings County, NY

  15. 45. Aerial view of station in 1944, four years after ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    45. Aerial view of station in 1944, four years after automation and before construction of the parking lot.U.S. Coast Guard (USCG) Photo - Bodie Island Light Station, Off Highway 12, Nags Head, Dare County, NC

  16. 36. photographer unknown 7 October 1940 AERIAL VIEW OF BONNEVILLE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    36. photographer unknown 7 October 1940 AERIAL VIEW OF BONNEVILLE PROJECT LOOKING WEST. - Bonneville Project, Columbia River, 1 mile Northeast of Exit 40, off Interstate 84, Bonneville, Multnomah County, OR

  17. 4. AERIAL VIEW OF SEGMENT OF VIRGINIA AVENUE BETWEEN SOUTH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. AERIAL VIEW OF SEGMENT OF VIRGINIA AVENUE BETWEEN SOUTH CAPITOL AND FOURTH STREET, SE, LOOKING EAST. VIEW INCLUDES GARFIELD PARK, RESERVATION NO. 17. - Virginia Avenue, Washington, District of Columbia, DC

  18. 2. AERIAL VIEW, LOOKING EAST, SHOWING STERN OF HULL IN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. AERIAL VIEW, LOOKING EAST, SHOWING STERN OF HULL IN FOREGROUND. TWO MASTS VISIBLE Charles Wisniewski, photographer, JanuAry 1985 - Shooters Island, Ships Graveyard, Vessel No. 54, Newark Bay, Staten Island (subdivision), Richmond County, NY

  19. 2. AERIAL VIEW, LOOKING NORTHWEST, SHOWING TOP, SIDE, AND REAR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. AERIAL VIEW, LOOKING NORTHWEST, SHOWING TOP, SIDE, AND REAR VIEW OF VESSEL 37 SUPERSTRUCTURE Charles Wisniewski, photographer, January 1985 - Shooters Island, Ships Graveyard, Vessel No. 37, Newark Bay, Staten Island (subdivision), Richmond County, NY

  20. 1. AERIAL VIEW, LOOKING NORTH, SHOWING COVERED BARGE (VESSEL 37) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. AERIAL VIEW, LOOKING NORTH, SHOWING COVERED BARGE (VESSEL 37) IN CENTER OF PICTURE WITH FOUR HATCHES SHOWING IN SUPERSTRUCTURE Charles Wisniewski, photographer, January 1985 - Shooters Island, Ships Graveyard, Vessel No. 37, Newark Bay, Staten Island (subdivision), Richmond County, NY

  1. 1. AERIAL VIEW, LOOKING EAST SHOWING PACKAGE FREIGHTER (VESSEL 54), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. AERIAL VIEW, LOOKING EAST SHOWING PACKAGE FREIGHTER (VESSEL 54), BROKEN BOW OF VESSEL IN FOREGROUND Charles Wisniewski, photographer, January 1985 - Shooters Island, Ships Graveyard, Vessel No. 54, Newark Bay, Staten Island (subdivision), Richmond County, NY

  2. Aerial view after September 11, 2001. Photograph by Eric J. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Aerial view after September 11, 2001. Photograph by Eric J. Tilford, U.S. Navy, September 17, 2001. - World Trade Center Site, Bounded by Vesey, Church, Liberty Streets, & Route 9A, New York County, NY

  3. 2. Aerial view of south wing of north court building, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. Aerial view of south wing of north court building, back of office / residence building and back of main building from balcony; facing southeast. - Mission Motel, North Court, 9235 MacArthur Boulevard, Oakland, Alameda County, CA

  4. 4. Aerial view of Whitsett intake (lower right), Parker Dam ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. Aerial view of Whitsett intake (lower right), Parker Dam and village (left), Gene Wash Reservoir, Gene Pump Plant and village (right). - Parker Dam, Spanning Colorado River between AZ & CA, Parker, La Paz County, AZ

  5. 4. AERIAL VIEW OF GENE WASH RESERVOIR AND GENE CAMP ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. AERIAL VIEW OF GENE WASH RESERVOIR AND GENE CAMP LOOKING SOUTHWEST. DAM AND SPILLWAY VISIBLE IN BOTTOM OF PHOTO. - Gene Wash Reservoir & Dam, 2 miles west of Parker Dam, Parker Dam, San Bernardino County, CA

  6. 1. AERIAL VIEW OF WHITSETT (INTAKE) PUMP PLANT ON LAKE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. AERIAL VIEW OF WHITSETT (INTAKE) PUMP PLANT ON LAKE SHORE IN FOREGROUND; GENE IN BACKGROUND, LOOKING SOUTHWEST. - Whitsett Pump Plant, West side of Colorado River, north of Parker Dam, Parker Dam, San Bernardino County, CA

  7. 54. AERIAL VIEW OF WIDE MEDIAN JUST SOUTH OF WASHINGTON ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    54. AERIAL VIEW OF WIDE MEDIAN JUST SOUTH OF WASHINGTON SAILING MARINA LOOKING NORTH. - George Washington Memorial Parkway, Along Potomac River from McLean to Mount Vernon, VA, Mount Vernon, Fairfax County, VA

  8. 56. AERIAL VIEW OF WIDE MEDIAN NEXT TO WASHINGTON SAILING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    56. AERIAL VIEW OF WIDE MEDIAN NEXT TO WASHINGTON SAILING MARINA LOOKING NORTH. - George Washington Memorial Parkway, Along Potomac River from McLean to Mount Vernon, VA, Mount Vernon, Fairfax County, VA

  9. User guide for the USGS aerial camera Report of Calibration.

    USGS Publications Warehouse

    Tayman, W.P.

    1984-01-01

    Calibration and testing of aerial mapping cameras includes the measurement of optical constants and the check for proper functioning of a number of complicated mechanical and electrical parts. For this purpose the US Geological Survey performs an operational type photographic calibration. This paper is not strictly a scientific paper but rather a 'user guide' to the USGS Report of Calibration of an aerial mapping camera for compliance with both Federal and State mapping specifications. -Author

  10. The Aeronautics Education, Research, and Industry Alliance (AERIAL) 2002 Report

    NASA Technical Reports Server (NTRS)

    Bowen, Brent D.; Fink, Mary M.; Nickerson, Jocelyn S.

    2002-01-01

    This report presents and overview of the Aeronautics Education, Research, and Industry Alliance (AERIAL). It covers the University of Nebraska's areas of research, and its outreach to students at Native American schools as part of AERIAL. The report contains three papers: "Airborne Remote Sensing (ARS) for Agricultural Research and Commercialization Application" (White Paper), "Validated Numerical Models for the Convective Extinction of Fuel Droplets (CEFD)", and "The Small Aircraft Transportation System (SATS): Research Collaborations with the NASA Langley Research Center".

  11. Detection of Aspens Using High Resolution Aerial Laser Scanning Data and Digital Aerial Images

    PubMed Central

    Säynäjoki, Raita; Packalén, Petteri; Maltamo, Matti; Vehmas, Mikko; Eerikäinen, Kalle

    2008-01-01

    The aim was to use high resolution Aerial Laser Scanning (ALS) data and aerial images to detect European aspen (Populus tremula L.) from among other deciduous trees. The field data consisted of 14 sample plots of 30 m × 30 m size located in the Koli National Park in the North Karelia, Eastern Finland. A Canopy Height Model (CHM) was interpolated from the ALS data with a pulse density of 3.86/m2, low-pass filtered using Height-Based Filtering (HBF) and binarized to create the mask needed to separate the ground pixels from the canopy pixels within individual areas. Watershed segmentation was applied to the low-pass filtered CHM in order to create preliminary canopy segments, from which the non-canopy elements were extracted to obtain the final canopy segmentation, i.e. the ground mask was analysed against the canopy mask. A manual classification of aerial images was employed to separate the canopy segments of deciduous trees from those of coniferous trees. Finally, linear discriminant analysis was applied to the correctly classified canopy segments of deciduous trees to classify them into segments belonging to aspen and those belonging to other deciduous trees. The independent variables used in the classification were obtained from the first pulse ALS point data. The accuracy of discrimination between aspen and other deciduous trees was 78.6%. The independent variables in the classification function were the proportion of vegetation hits, the standard deviation of in pulse heights, accumulated intensity at the 90th percentile and the proportion of laser points reflected at the 60th height percentile. The accuracy of classification corresponded to the validation results of earlier ALS-based studies on the classification of individual deciduous trees to tree species.

  12. Research of Active Contour Model in Aerial Images

    NASA Astrophysics Data System (ADS)

    Kun, Wang; Li, Guo

    With the development of computer and aviation technology, the aerial image is facing an important issue is how to automate, including aerial images of the automatic extraction of the target. In this paper, the issue of aerial images to study the active contour model is introduced, that is, Snake model, to achieve the target aerial image of the semi-automatic contour extraction method. Snake model used the unique characteristic of the energy minimization, carried out on the image contour extraction, to obtain a clear, consistent and accurate image contour. The model is defined through the energy minimization of the function, given in the initial position of artificial circumstances, through the iterative calculation of Snake model will eventually form the minimum energy function has been described in the outline of the target partition. The results indicate that Snake model for aerial images of the edge contour extraction, verification, concluded that the Snake-based edge detection methods could be more objectively and accurately extract the edge of the outline of aerial images.

  13. [Death by explosion of an aerial mine].

    PubMed

    Stockhausen, Sarah; Wöllner, Kirsten; Madea, Burkhard; Doberentz, Elke

    2014-01-01

    Civilians are rarely killed by military weapons except in times of war. In early 2014, a 50-year-old man died in an explosion of an aerial mine from the Second World War when he was crushing concrete chunks with an excavator at a recycling plant. In the burned operator's cab, the remains of a body were found on the driver's seat. The thorax and the head were missing. Still sticking in the shoe, the right foot severed at the ankle was found about 7 m from the excavator together with numerous small to tiny body parts. At autopsy, the completely disrupted, strongly charred lower torso of a male connected to the left extremities as well as a large number of small tissue fragments and calcined bones were found. According to calculations performed by the seismographical station on the basis of seismic data, only about 45-60 percent of the charge had detonated. The autopsy results illustrate all the more the massive impact of such an explosion. PMID:26548019

  14. Quantifying heat losses using aerial thermography

    SciTech Connect

    Haigh, G.A.; Pritchard, S.E.

    1980-01-01

    A theoretical model is described for calculating flat roof total heat losses and thermal conductances from aerial infrared data. Three empirical methods for estimating convective losses are described. The disagreement between the methods shows that they are prone to large (20%) errors, and that the survey should be carried out in low wind speeds, in order to minimize the effect of these errors on the calculation of total heat loss. The errors associated with knowledge of ground truth data are discussed for a high emissivity roof and three sets of environmental conditions. It is shown that the error in the net radiative loss is strongly dependent on the error in measuring the broad-band radiation incident on the roof. This is minimized for clear skies, but should be measured. Accurate knowledge of roof emissivity and the radiation reflected from the roof is shown to be less important. Simple techniques are described for measuring all three factors. Using these techniques in good conditions it should be possible to measure total heat losses to within 15%.

  15. Spread spectrum applications in unmanned aerial vehicles

    NASA Astrophysics Data System (ADS)

    Bess, Philip K.

    1994-06-01

    This thesis is part of an ongoing Naval Postgraduate School research project to develop unmanned aerial vehicles (UAV's) using current off the shelf (COTS) technology. This thesis specifically evaluated a spread spectrum UHF data link between a UAV and ground terminal. The command and control (C2) process and its role as the fundamental premise of the warfare commander were discussed. A review of the Pioneer remotely piloted vehicle (RPV), which gained such wide recognition during Operations Desert Storm and Desert Shield, was provided to the reader for familiarization with the workings of a generic UAV. An investigation of two common spread spectrum techniques and their associated benefits was made. A link budget calculation was made. The choice of a spread spectrum radio transceiver was reviewed. The requirements and design of the UAV and ground terminal antenna were discussed. A link budget analysis was performed. An atmospheric path propagation prediction was performed. The details of an actual flight test and the data gathered were examined. Future changes to enhance the data link performance and increase its capabilities were introduced. The COTS spread spectrum data link will enhance the role of the UAV in its command and control mission for the warfare commander.

  16. AERICOMP: an aerial photo comparison system

    NASA Astrophysics Data System (ADS)

    Grewe, Lynne L.; Rowe, Neil; Baer, Wolfgang

    2000-08-01

    This paper describes a system, which compares aerial photographs of the same terrain taken at different times and tires to recognize straight-edged cultural features that have changed. This work is intended to be highly robust, handling very different lighting conditions, weather, times of year, camera, and film between the images to be compared. Our system AERICOMP is designed to facilitate battlefield terrain modeling by permitting automatic updates form new images. AERICOMP does coarse registration, image correction, feature detection, automatic refined registration, feature difference detection and reduction, feature difference presentation and operator acceptance, difference identification, and database update. It emphasizes line segments for comparisons because differences in them are more robust for photometric changes between terrain images. In addition, line segment comparisons require less computation than pixel comparisons and are more compatible with identification tasks. For our intended application of battlefield terrain modeling, detecting changes in man-made structures is of much greater importance than changes in vegetation, and line segments are the key to identifying such structures. We show results involving change analysis between color IR and black/white USGS photographs of the same area six years apart. Even a mostly automatic system benefits form user interacting at key points. AERICOMP exploits user judgements at the beginning and end of its processing to assist in coarse registration and to approve the significance of any differences found. AERICOMP is currently under development at the Naval Postgraduate School, and is supported by the TENCAPS project under the US Navy.

  17. Intelligent mission management for uninhabited aerial vehicles

    NASA Astrophysics Data System (ADS)

    Sullivan, Don; Totah, Joseph J.; Wegener, Steve S.; Enomoto, Francis Y.; Frost, Chad R.; Kaneshige, John; Frank, Jeremy E.

    2004-12-01

    The National Aeronautics and Space Administration (NASA), Aeronautics Research Mission Directorate, is developing Intelligent Mission Management (IMM) technology for Uninhabited Aerial Vehicles (UAV"s) under the Vehicle Systems Program"s Autonomous Robust Avionics Project. The objective of the project is to develop air vehicle and associated ground element technology to enhance mission success by increasing mission return and reducing mission risk. Unanticipated science targets, uncertain conditions and changing mission requirements can all influence a flight plan and may require human intervention during the flight; however, time delays and communications bandwidth limit opportunities for operator intervention. To meet these challenges, we will develop UAV-specific technologies enabling goal-directed autonomy, i.e. the ability to redirect the flight in response to current conditions and the current goals of the flight. Our approach divides goal-directed autonomy into two components, an on-board Intelligent Agent Architecture (IAA) and a ground based Collaborative Decision Environment (CDE). These technologies cut across all aspects of a UAV system, including the payload, inner- and outer-loop onboard control, and the operator"s ground station.

  18. Localization of aerial pure tones by pinnipeds

    NASA Astrophysics Data System (ADS)

    Holt, Marla M.; Schusterman, Ronald J.; Kastak, David; Southall, Brandon L.

    2005-12-01

    In this study, minimum audible angles (MAAs) of aerial pure tones were measured in and compared between a northern elephant seal (Mirounga angustirostris), a harbor seal (Phoca vitulina), and a California sea lion (Zalophus californianus). Testing was conducted between 0.8 and 16 kHz in the elephant seal and 0.8 and 20 kHz in the harbor seal and sea lion in a hemi-anechoic chamber using a left/right psychophysical procedure. Performance for the same frequencies was also quantified for discrete speaker separation of 5° from the mid-line. For all subjects, MAAs ranged from approximately 3° to 15° and were generally equal to or larger than those previously measured in the same subjects with a broadband signal. Performance at 5° ranged from chance to 97% correct, depending on frequency and subject. Poorest performance in the sea lion and harbor seal occurred at intermediate frequencies, which is consistent with the duplex theory of sound localization. In contrast, the elephant seal's poorest performance occurred at higher frequencies. The elephant seal's result suggests an inferior ability to utilize interaural level differences and is perhaps related to best hearing sensitivity shifted toward lower frequencies in this species relative to other pinnipeds.

  19. The design of aerial camera focusing mechanism

    NASA Astrophysics Data System (ADS)

    Hu, Changchang; Yang, Hongtao; Niu, Haijun

    2015-10-01

    In order to ensure the imaging resolution of aerial camera and compensating defocusing caused by the changing of atmospheric temperature, pressure, oblique photographing distance and other environmental factor [1,2], and to meeting the overall design requirements of the camera for the lower mass and smaller size , the linear focusing mechanism is designed. Through the target surface support, the target surface component is connected with focusing driving mechanism. Make use of precision ball screws, focusing mechanism transforms the input rotary motion of motor into linear motion of the focal plane assembly. Then combined with the form of linear guide restraint movement, the magnetic encoder is adopted to detect the response of displacement. And the closed loop control is adopted to realize accurate focusing. This paper illustrated the design scheme for a focusing mechanism and analyzed its error sources. It has the advantages of light friction and simple transmission chain and reducing the transmission error effectively. And this paper also analyses the target surface by finite element analysis and lightweight design. Proving that the precision of focusing mechanism can achieve higher than 3um, and the focusing range is +/-2mm.

  20. Adapting unmanned aerial vehicles for turbulence measurement

    NASA Astrophysics Data System (ADS)

    Witte, Brandon; Helvey, Jacob; Mullen, Jon; Thamann, Michael; Bailey, Sean

    2015-11-01

    We describe the approach of using highly instrumented and autonomous unmanned aerial vehicles (UAVs) to spatially interrogate the atmospheric boundary layer's turbulent flow structure. This approach introduces new capabilities not available in contemporary micro-meteorological measurement techniques such as instrumented towers, balloons, and manned aircraft. A key advantage in utilizing UAVs as an atmospheric turbulence research tool is that it reduces the reliance on assumptions regarding temporal evolution of the turbulence inherent within Taylor's frozen flow hypothesis by facilitating the ability to spatially sample the flow field over a wide range of spatial scales. In addition, UAVs offer the ability to measure in a wide range of boundary conditions and distance from the earth's surface, the ability to gather many boundary layer thicknesses of data during brief periods of statistical quasi-stationarity, and the ability to acquire data where and when it is needed. We describe recent progress made in manufacturing purpose-built airframes and adapting pre-fabricated airframes for these measurements by integrating sensors into those airframes and developing data analysis techniques to isolate the atmospheric turbulence from the measured velocity signal. This research is supported by NSF Award CBET-1351411.

  1. Measured Noise from Small Unmanned Aerial Vehicles

    NASA Technical Reports Server (NTRS)

    Cabell, Randolph; McSwain, Robert; Grosveld, Ferdinand

    2016-01-01

    Proposed uses of small unmanned aerial vehicles (UAVs), including home package delivery, have the potential to expose large portions of communities to a new noise source. This paper discusses results of flyover noise measurements of four small UAVs, including an internal combustion-powered model airplane and three battery-powered multicopters. Basic noise characteristics of these vehicles are discussed, including spectral properties and sound level metrics such as sound pressure level, effective perceived noise level, and sound exposure level. The size and aerodynamic characteristics of the multicopters in particular make their flight path susceptible to atmospheric disturbances such as wind gusts. These gusts, coupled with a flight control system that varies rotor speed to maintain vehicle stability, create an unsteady acoustic signature. The spectral variations resulting from this unsteadiness are explored, in both hover and flyover conditions for the multicopters. The time varying noise, which differs from the relatively steady noise generated by large transport aircraft, may complicate the prediction of human annoyance using conventional sound level metrics.

  2. Solar-powered unmanned aerial vehicles

    SciTech Connect

    Reinhardt, K.C.; Lamp, T.R.; Geis, J.W.; Colozza, A.J.

    1996-12-31

    An analysis was performed to determine the impact of various power system components and mission requirements on the size of solar-powered high altitude long endurance (HALE)-type aircraft. The HALE unmanned aerial vehicle (UAV) has good potential for use in many military and civil applications. The primary power system components considered in this study were photovoltaic (PV) modules for power generation and regenerative fuel cells for energy storage. The impact of relevant component performance on UAV size and capability were considered; including PV module efficiency and mass, power electronics efficiency, and fuel cell specific energy. Mission parameters such as time of year, flight altitude, flight latitude, and payload mass and power were also varied to determine impact on UAV size. The aircraft analysis method used determines the required aircraft wing aspect ratio, wing area, and total mass based on maximum endurance or minimum required power calculations. The results indicate that the capacity of the energy storage system employed, fuel cells in this analysis, greatly impacts aircraft size, whereas the impact of PV module efficiency and mass is much less important. It was concluded that an energy storage specific energy (total system) of 250--500 Whr/kg is required to enable most useful missions, and that PV cells with efficiencies greater than {approximately} 12% are suitable for use.

  3. Aerial view of the KSC crawler transporters

    NASA Technical Reports Server (NTRS)

    1998-01-01

    In this aerial view the Crawler Transporter Maintenance Building (center) sits between two crawler transporters. The KSC crawlers are the largest tracked vehicles known. Once used to move assembled Apollo/Saturn from the VAB to the launch pad, they are now used for transporting Shuttle vehicles. They move the Mobile Launcher Platform into the Vehicle Assembly Building and then to the Launch Pad with an assembled space vehicle. Maximum speed is 1.6 km (one mile) per hour loaded, about 3.2 km (2 miles) per hour unloaded. Launch Pad to VAB trip time with the Mobile Launch Platform is about 5 hours. The crawler burns 568 liters (150 gallons) of diesel oil per mile. KSC's two crawlers have accumulated 1,243 miles since 1977. Including the Apollo years, the transporters have racked up 2,526 miles, about the same distance as a one-way trip from KSC to Los Angeles by interstate highway or a round trip between KSC and New York City.

  4. Genotoxicity of dried Hoodia parviflora aerial parts.

    PubMed

    Lynch, Barry; Lau, Annette; Baldwin, Nigel; Hofman-Hüther, Hana; Bauter, Mark R; Marone, Palma Ann

    2013-05-01

    Hoodia parviflora is being developed commercially for use in weight loss food and dietary supplement products. Its effects are ascribed to a number of glycosides that have been shown to be present in plant extracts from several Hoodia species, the best known of which is H. gordonii. H. parviflora has been identified as an alternative to H. gordonii, and, as part of the process to develop H. parviflora, in vitro genotoxicity tests, as recommended by recent European Food Safety Authority guidance, were conducted on a dried powder preparation of H. parviflora aerial parts. The preparation was tested for reverse mutation at doses up to 5,000μg/plate in Salmonella typhimurium strains TA98, TA100, TA1535, and TA1537, and in Escherichia coli WP2 uvrA TA, both in the presence and in the absence of an exogenous source of metabolic activation (rat liver S9). In addition, the dried powder was evaluated in an in vitro cytotoxicity chromosome aberration assay using human lymphocytes. Test conditions included both a 4 (up to 2500μg/mg) and 44-h exposure period (up to 1000μg/mg) and the incorporation of an exogenous source of metabolic activation (4-h exposure only). H. parviflora dried powder was non-genotoxic in both in vitro assays. PMID:23348409

  5. 36 CFR 1237.24 - What are special considerations for storage and maintenance of aerial photographic records?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... maintenance of aerial photographic records? (a) Mark each aerial film container with a unique identification code to facilitate identification and filing. (b) Mark aerial film indexes with the unique aerial film identification codes or container codes for the aerial film that they index. Also, file and mark the...

  6. 36 CFR 1237.24 - What are special considerations for storage and maintenance of aerial photographic records?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... maintenance of aerial photographic records? (a) Mark each aerial film container with a unique identification code to facilitate identification and filing. (b) Mark aerial film indexes with the unique aerial film identification codes or container codes for the aerial film that they index. Also, file and mark the...

  7. 36 CFR 1237.24 - What are special considerations for storage and maintenance of aerial photographic records?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... maintenance of aerial photographic records? (a) Mark each aerial film container with a unique identification code to facilitate identification and filing. (b) Mark aerial film indexes with the unique aerial film identification codes or container codes for the aerial film that they index. Also, file and mark the...

  8. 36 CFR 1237.24 - What are special considerations for storage and maintenance of aerial photographic records?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... maintenance of aerial photographic records? (a) Mark each aerial film container with a unique identification code to facilitate identification and filing. (b) Mark aerial film indexes with the unique aerial film identification codes or container codes for the aerial film that they index. Also, file and mark the...

  9. 36 CFR 1237.24 - What are special considerations for storage and maintenance of aerial photographic records?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... maintenance of aerial photographic records? (a) Mark each aerial film container with a unique identification code to facilitate identification and filing. (b) Mark aerial film indexes with the unique aerial film identification codes or container codes for the aerial film that they index. Also, file and mark the...

  10. Pasadena, California Anaglyph with Aerial Photo Overlay

    NASA Technical Reports Server (NTRS)

    2000-01-01

    This anaglyph shows NASA's Jet Propulsion Laboratory (JPL) in Pasadena, California. Red-blue glasses are required to see the 3-D effect. The surrounding residential areas of La Canada-Flintridge (to the left) and Altadena/Pasadena (to the right) are also shown. JPL is located at the base of the San Gabriel Mountains, an actively growing mountain range, seen towards the top of the image. The large canyon coming out of the mountains (top to bottom of image) is the Arroyo Seco, which is a major drainage channel for the mountains. Sand and gravel removal operations in the lower part of the arroyo (bottom of image) are removing debris brought down by flood and mudflow events. Old landslide scars (lobe-shaped features) are seen in the arroyo, evidence that living near steep canyon slopes in tectonically active areas can be hazardous. The data can also be utilized by recreational users such as hikers enjoying the natural beauty of these rugged mountains.

    This anaglyph was generated using topographic data from the Shuttle Radar Topography Mission to create two differing perspectives of a single image, one perspective for each eye. The detailed aerial image was provided by U. S. Geological Survey digital orthophotography. Each point in the image is shifted slightly, depending on its elevation. When viewed through special glasses, the result is a vertically exaggerated view of the Earth's surface in its full three dimensions. Anaglyph glasses cover the left eye with a red filter and cover the right eye with a blue filter.

    The Shuttle Radar Topography Mission (SRTM), launched on February 11,2000, uses the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission is designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, an additional C-band imaging antenna

  11. Unmanned Aerial Systems for scientific research

    NASA Astrophysics Data System (ADS)

    Stefanutti, Leopoldo; MacKenzie, A. Robert; di Donfrancesco, Guido; Amici, Stefania

    2010-05-01

    In the last decade a very wide spectrum of Unmanned Aerial Systems (UAS) has been developed, essentially for military purposes. They range from very small aircraft, weighing a few kg, to stratospheric aeroplanes with total weight of many tonnes. Endurance also varies very markedly, from a few hours to ≤ 60 hours, and possibly more in the next future. Environmental Research and Services (ERS) Srl., Florence, has carried out a scoping study for the UK Natural Environmental Research Council, to identify key Earth and Environmental Science issues which can best be tackled by means of unmanned aerial platforms. The study focused on issues which could not easily be solved using other platforms, as manned aircraft, airships and satellites. Topics included: · glaciology (including both continental ice-sheets and sea-ice) · volcanology · coastal and ocean observation · Exchange processes between sea and atmosphere · atmospheric turbulence, transport, and chemistry in the planetary boundary layer, in the free troposphere and in the upper troposphere - lower stratosphere (UTLS). Different platforms are best suited to each of these tasks. Platforms range from mini UAS, to Middle Altitude and Long Endurance (MALE) and High Altitude and Long Endurance (HALE) platforms, from electric aircraft to diesel-turbocharged platforms, from solar to turbofan aircraft. Generally long endurance and the capability to fly beyond line of sight are required for most scientific missions. An example is the application of UAS to the measurement of the extension and depth of sea and continental ice. Such measurements are of primary importance in the evaluation of climatic change. While with satellites it is possible to measure the extent of ice, measuring the depth can only be accomplished by using radar operating at relatively low altitudes. A tactical or a MALE UAS could be equipped with VHL radar which can penetrate ice and hence used to measure the depth of ice sheets. A platform which

  12. Radiation surveillance using an unmanned aerial vehicle.

    PubMed

    Pöllänen, Roy; Toivonen, Harri; Peräjärvi, Kari; Karhunen, Tero; Ilander, Tarja; Lehtinen, Jukka; Rintala, Kimmo; Katajainen, Tuure; Niemelä, Jarkko; Juusela, Marko

    2009-02-01

    Radiation surveillance equipment was mounted in a small unmanned aerial vehicle. The equipment consists of a commercial CsI detector for count rate measurement and a specially designed sampling unit for airborne radioactive particles. Field and flight tests were performed for the CsI detector in the area where (137)Cs fallout from the Chernobyl accident is 23-45 kBq m(-2). A 3-GBq (137)Cs point source could be detected at the altitude of 50 m using a flight speed of 70 km h(-1) and data acquisition interval of 1s. Respective response for (192)Ir point source is 1 GBq. During the flight, the detector reacts fast to ambient external dose rate rise of 0.1 microSv h(-1), which gives for the activity concentration of (131)I less than 1 kB qm(-3). Operation of the sampler equipped with different type of filters was investigated using wind-tunnel experiments and field tests with the aid of radon progeny. Air flow rate through the sampler is 0.2-0.7 m(3)h(-1) at a flight speed of 70 km h(-1) depending on the filter type in question. The tests showed that the sampler is able to collect airborne radioactive particles. Minimum detectable concentration for transuranium nuclides, such as (239)Pu, is of the order of 0.2 Bq m(-3) or less when alpha spectrometry with no radiochemical sample processing is used for activity determination immediately after the flight. When a gamma-ray spectrometer is used, minimum detectable concentrations for several fission products such as (137)Cs and (131)I are of the order of 1 Bq m(-3). PMID:19046635

  13. Analysis of cyberattacks on unmanned aerial systems

    NASA Astrophysics Data System (ADS)

    Shull, Andrew M.

    With the increasing power and convenience offered by the use of embedded systems in control applications, such systems will undoubtedly continue to be developed and deployed. Recently, however, a focus on data-centric systems and developing network-enabled control systems has emerged, allowing for greater performance, safety, and resource allocation in systems such as smart power grids and unmanned military aircraft. However, this increase in connectivity also introduces vulnerabilities into these systems, potentially providing access to malicious parties seeking to disrupt the operation of those systems or to cause damage. Given the high potential cost of a failure in these systems in terms of property, sensitive information, and human safety, steps need to be taken to secure these systems. In order to analyze the vulnerabilities of unmanned aerial systems (UASs) specifically, a simulation testbed is developed to perform high-fidelity simulations of UAS operations using both software models and the actual vehicle hardware. Then, potential attacks against the control system and their corresponding intents are identified and introduced into these simulations. Failure conditions are defined, and extensive simulation of attacks in different combinations and magnitudes are performed in both software and hardware in order to identify particularly successful attacks, including attacks that are difficult to detect. From these results, vulnerabilities of the system can be determined so that appropriate remedies can be designed. Additionally, stealthy false data injection attacks against linear feedback systems are considered. The identification of these attacks is formed as an optimization problem constrained by the ability of monitoring systems to detect the attack. The optimal attack input is then determined for an example application so that the worst case system performance can be identified and, if needed, improved.

  14. Observing river stages using unmanned aerial vehicles

    NASA Astrophysics Data System (ADS)

    Niedzielski, Tomasz; Witek, Matylda; Spallek, Waldemar

    2016-08-01

    We elaborated a new method for observing water surface areas and river stages using unmanned aerial vehicles (UAVs). It is based on processing multitemporal five orthophotomaps produced from the UAV-taken visible light images of nine sites of the river, acquired with a sufficient overlap in each part. Water surface areas are calculated in the first place, and subsequently expressed as fractions of total areas of water-covered terrain at a given site of the river recorded on five dates. The logarithms of the fractions are later calculated, producing five samples, each consisted of nine elements. In order to detect statistically significant increments of water surface areas between two orthophotomaps, we apply the asymptotic and bootstrapped versions of the Student's t test, preceded by other tests that aim to check model assumptions. The procedure is applied to five orthophotomaps covering nine sites of the Ścinawka river (south-western (SW) Poland). The data have been acquired during the experimental campaign, at which flight settings were kept unchanged over nearly 3 years (2012-2014). We have found that it is possible to detect transitions between water surface areas associated with all characteristic water levels (low, mean, intermediate and high stages). In addition, we infer that the identified transitions hold for characteristic river stages as well. In the experiment we detected all increments of water level: (1) from low stages to mean, intermediate and high stages; (2) from mean stages to intermediate and high stages; and (3) from intermediate stages to high stages. Potential applications of the elaborated method include verification of hydrodynamic models and the associated predictions of high flows as well as monitoring water levels of rivers in ungauged basins.

  15. Environmental applications utilizing digital aerial imagery

    SciTech Connect

    Monday, H.M.

    1995-06-01

    This paper discusses the use of satellite imagery, aerial photography, and computerized airborne imagery as applied to environmental mapping, analysis, and monitoring. A project conducted by the City of Irving, Texas involves compliance with national pollutant discharge elimination system (NPDES) requirements stipulated by the Environmental Protection Agency. The purpose of the project was the development and maintenance of a stormwater drainage utility. Digital imagery was collected for a portion of the city to map the City`s porous and impervious surfaces which will then be overlaid with property boundaries in the City`s existing Geographic information System (GIS). This information will allow the City to determine an equitable tax for each land parcel according to the amount of water each parcel is contributing to the stormwater system. Another project involves environmental compliance for warm water discharges created by utility companies. Environmental consultants are using digital airborne imagery to analyze thermal plume affects as well as monitoring power generation facilities. A third project involves wetland restoration. Due to freeway and other forms of construction, plus a major reduction of fresh water supplies, the Southern California coastal wetlands are being seriously threatened. These wetlands, rich spawning grounds for plant and animal life, are home to thousands of waterfowl and shore birds who use this habitat for nesting and feeding grounds. Under the leadership of Southern California Edison (SCE) and CALTRANS (California Department of Transportation), several wetland areas such as the San Dieguito Lagoon (Del Mar, California), the Sweetwater Marsh (San Diego, California), and the Tijuana Estuary (San Diego, California) are being restored and closely monitored using digital airborne imagery.

  16. Mapping Forest Edge Using Aerial Lidar

    NASA Astrophysics Data System (ADS)

    MacLean, M. G.

    2014-12-01

    Slightly more than 60% of Massachusetts is covered with forest and this land cover type is invaluable for the protection and maintenance of our natural resources and is a carbon sink for the state. However, Massachusetts is currently experiencing a decline in forested lands, primarily due to the expansion of human development (Thompson et al., 2011). Of particular concern is the loss of "core areas" or the areas within forests that are not influenced by other land cover types. These areas are of significant importance to native flora and fauna, since they generally are not subject to invasion by exotic species and are more resilient to the effects of climate change (Campbell et al., 2009). However, the expansion of development has reduced the amount of this core area, but the exact amount is still unknown. Current methods of estimating core area are not particularly precise, since edge, or the area of the forest that is most influenced by other land cover types, is quite variable and situation dependent. Therefore, the purpose of this study is to devise a new method for identifying areas that could qualify as "edge" within the Harvard Forest, in Petersham MA, using new remote sensing techniques. We sampled along eight transects perpendicular to the edge of an abandoned golf course within the Harvard Forest property. Vegetation inventories as well as Photosynthetically Active Radiation (PAR) at different heights within the canopy were used to determine edge depth. These measurements were then compared with small-footprint waveform aerial LiDAR datasets and imagery to model edge depths within Harvard Forest.

  17. Salmonella Biofilm Formation on Aspergillus niger Involves Cellulose – Chitin Interactions

    PubMed Central

    Brandl, Maria T.; Carter, Michelle Q.; Parker, Craig T.; Chapman, Matthew R.; Huynh, Steven; Zhou, Yaguang

    2011-01-01

    Salmonella cycles between host and nonhost environments, where it can become an active member of complex microbial communities. The role of fungi in the environmental adaptation of enteric pathogens remains relatively unexplored. We have discovered that S. enterica Typhimurium rapidly attaches to and forms biofilms on the hyphae of the common fungus, Aspergillus niger. Several Salmonella enterica serovars displayed a similar interaction, whereas other bacterial species were unable to bind to the fungus. Bacterial attachment to chitin, a major constituent of fungal cell walls, mirrored this specificity. Pre-incubation of S. Typhimurium with N-acetylglucosamine, the monomeric component of chitin, reduced binding to chitin beads by as much as 727-fold and inhibited attachment to A. niger hyphae considerably. A cellulose-deficient mutant of S. Typhimurium failed to attach to chitin beads and to the fungus. Complementation of this mutant with the cellulose operon restored binding to chitin beads to 79% of that of the parental strain and allowed for attachment and biofilm formation on A. niger, indicating that cellulose is involved in bacterial attachment to the fungus via the chitin component of its cell wall. In contrast to cellulose, S. Typhimurium curli fimbriae were not required for attachment and biofilm development on the hyphae but were critical for its stability. Our results suggest that cellulose–chitin interactions are required for the production of mixed Salmonella-A. niger biofilms, and support the hypothesis that encounters with chitinaceous alternate hosts may contribute to the ecological success of human pathogens. PMID:22003399

  18. International-Aerial Measuring System (I-AMS) Training Program

    SciTech Connect

    Wasiolek, Piotre T.; Malchor, Russell L.; Maurer, Richard J.; Adams, Henry L.

    2015-10-01

    Since the Fukushima reactor accident in 2011, there has been an increased interest worldwide in developing national capabilities to rapidly map and assess ground contamination resulting from nuclear reactor accidents. The capability to rapidly measure the size of the contaminated area, determine the activity level, and identify the radionuclides can aid emergency managers and decision makers in providing timely protective action recommendations to the public and first responders. The development of an aerial detection capability requires interagency coordination to assemble the radiation experts, detection system operators, and aviation aircrews to conduct the aerial measurements, analyze and interpret the data, and provide technical assessments. The Office of International Emergency Management and Cooperation (IEMC) at the U.S. Department of Energy, National Nuclear Security Administration (DOE/NNSA) sponsors an International - Aerial Measuring System (I-AMS) training program for partner nations to develop and enhance their response to radiological emergencies. An initial series of courses can be conducted in the host country to assist in developing an aerial detection capability. As the capability develops and expands, additional experience can be gained through advanced courses with the opportunity to conduct aerial missions over a broad range of radiation environments.

  19. Bisbibenzyls, a New Type of Antifungal Agent, Inhibit Morphogenesis Switch and Biofilm Formation through Upregulation of DPP3 in Candida albicans

    PubMed Central

    Zhang, Li; Chang, Wenqiang; Sun, Bin; Groh, Matthias; Speicher, Andreas; Lou, Hongxiang

    2011-01-01

    The yeast-to-hypha transition plays a crucial role in the pathogenesis of C. albicans. Farnesol, a quorum sensing molecule (QSM) secreted by the fungal itself, could prevent the formation of hyphae and subsequently lead to the defect of biofilm formation. The DPP3, encoding phosphatase, is a key gene in regulating farnesol synthesis. In this study, we screened 24 bisbibenzyls and 2 bibenzyls that were isolated from bryophytes or chemically synthesized by using CLSI method for antifungal effect. Seven bisbibenzyls were found to have antifungal effects with IC80 less than 32 µg/ml, and among them, plagiochin F, isoriccardin C and BS-34 were found to inhibit the hyphae and biofilm formation of C. albicans in a dose-dependent manner. To uncover the underlying relationship between morphogenesis switch and QSM formation, we measured the farnesol production by HPLC-MS and quantified Dpp3 expression by detecting the fluorescent intensity of green fluorescent protein tagged strain using Confocal Laser Scanning microscopy and Multifunction Microplate Reader. The DPP3 transcripts were determined by real-time PCR. The data indicated that the bisbibenzyls exerted antifungal effects through stimulating the synthesis of farnesol via upregulation of Dpp3, suggesting a potential antifungal application of bisbibenzyls. In addition, our assay provides a novel, visual and convenient method to measure active compounds against morphogenesis switch. PMID:22174935

  20. Analysis of initial drainage network evolution from aerial photography and a DEM time series

    NASA Astrophysics Data System (ADS)

    Schneider, Anna; Gerke, Horst H.; Maurer, Thomas; Nenov, Rossen; Raab, Thomas

    2013-04-01

    The evolution of erosion rill or gully networks is a formative process in initial landscape development. Digital representations of drainage networks are often derived from Digital Elevation Models (DEMs) based on morphometric parameters, or mapped in field surveys or from aerial photographs. This study attempted to reconstruct and analyze the first five years of erosion rill network evolution in the 6 ha artificial catchment 'Hühnerwasser', which serves as a real world-laboratory to study patterns and processes of initial ecosystem development. The drainage network was characterized in a twofold approach, based on the analysis of remotely-sensed data. We used high-resolution drone-based aerial photographs to map the actively eroding rill network for four states of development, and a time series of ten Digital Elevation Models to characterize the morphology of the surface. Rill network maps and morphometric parameters were combined to allow for region-specific analyses of morphometry for different parts of the rill network. After a rapid growth of the erosion rill network during the first two years of development, a reduction of the area of actively eroding rills was observed. Region-specific analysis of morphometry indicates an increase in flow accumulation in the central parts of the rill network, which suggests that locally evolving feedback cycles between flow accumulation and erosion affected rill network development, in addition to the effects of precipitation characteristics and the growth of vegetation cover. The combination of drainage network characterization from aerial photography and DEMs could improve analyses of initial drainage network development in experimental studies, as it allows for critical comparisons of flow accumulation patterns and the actual patterns of erosion rills or gullies.

  1. Robust adaptive control for Unmanned Aerial Vehicles

    NASA Astrophysics Data System (ADS)

    Kahveci, Nazli E.

    The objective of meeting higher endurance requirements remains a challenging task for any type and size of Unmanned Aerial Vehicles (UAVs). According to recent research studies significant energy savings can be realized through utilization of thermal currents. The navigation strategies followed across thermal regions, however, are based on rather intuitive assessments of remote pilots and lack any systematic path planning approaches. Various methods to enhance the autonomy of UAVs in soaring applications are investigated while seeking guarantees for flight performance improvements. The dynamics of the aircraft, small UAVs in particular, are affected by the environmental conditions, whereas unmodeled dynamics possibly become significant during aggressive flight maneuvers. Besides, the demanded control inputs might have a magnitude range beyond the limits dictated by the control surface actuators. The consequences of ignoring these issues can be catastrophic. Supporting this claim NASA Dryden Flight Research Center reports considerable performance degradation and even loss of stability in autonomous soaring flight tests with the subsequent risk of an aircraft crash. The existing control schemes are concluded to suffer from limited performance. Considering the aircraft dynamics and the thermal characteristics we define a vehicle-specific trajectory optimization problem to achieve increased cross-country speed and extended range of flight. In an environment with geographically dispersed set of thermals of possibly limited lifespan, we identify the similarities to the Vehicle Routing Problem (VRP) and provide both exact and approximate guidance algorithms for the navigation of automated UAVs. An additional stochastic approach is used to quantify the performance losses due to incorrect thermal data while dealing with random gust disturbances and onboard sensor measurement inaccuracies. One of the main contributions of this research is a novel adaptive control design with

  2. Landscape-scale geospatial research utilizing low elevation aerial photography generated with commercial unmanned aerial systems

    NASA Astrophysics Data System (ADS)

    Lipo, C. P.; Lee, C.; Wechsler, S.

    2012-12-01

    With the ability to generate on demand high-resolution imagery across landscapes, unmanned aerial systems (UAS) are increasingly become the tools of choice for geospatial researchers. At CSULB, we have implemented a number of aerial systems in order to conduct archaeological, vegetation and terrain analyses. The platforms include the commercially available X100 by Gatewing, a hobby based aircraft, kites, and tethered blimps. From our experience, each platform has advantages and disadvantages n applicability int eh field and derived imagery. The X100, though comparatively more costly, produces images with excellent coverage of areas of interest and can fly in a wide range of weather conditions. The hobby plane solutions are low-cost and flexible in their configuration but their relative lightweight makes them difficult to fly in windy conditions and the sets of images produced can widely vary. The tethered blimp has a large payload and can fly under many conditions but its ability to systematically cover large areas is very limited. Kites are extremely low-cost but have similar limitations to blimps for area coverage and limited payload capabilities. Overall, we have found the greatest return for our investment from the Gatewing X100, despite its relatively higher cost, due to the quality of the images produced. Developments in autopilots, however, may improve the hobby aircraft solution and allow X100 like products to be produced in the near future. Results of imagery and derived products from these UAS missions will be presented and evaluated. Assessment of the viability of these UAS-products will inform the research community of their applicability to a range of applications, and if viable, could provide a lower cost alternative to other image acquisition methods.

  3. Real-time aerial video exploitation station for small unmanned aerial vehicles

    NASA Astrophysics Data System (ADS)

    Gregga, Jason B.; Pope, Art; Kielmeyer, Kathy; Ran, Yang

    2008-04-01

    SET Corporation, under contract to the Air Force Research Laboratory, Sensors Directorate, is building a Real-time Aerial Video Exploitation (RAVE) Station for Small Unmanned Aerial Vehicles (SUAVs). Users of SUAVs have in general been underserved by the exploitation community because of the unique challenges of operating in the SUAV environment. SUAVs are often used by small teams without the benefits of dedicated personnel, equipment, and time for exploitation. Thus, effective exploitation tools for these users must have sufficiently automated capabilities to keep demands on the team's labor low, with the ability to process video and display results in real-time on commonly-found ruggedized laptops. The RAVE Station provides video stabilization, mosaicking, moving target indicators (MTI), tracking, and target classification, and displays the results in several different display modes. This paper focuses on features of the RAVE Station implementation that make it efficient, low-cost, and easy to use. The software architecture is a pipeline model, allowing each processing module to tap off the pipe, and to add new information back into the stream, keeping redundancy to a minimum. The software architecture is also open, allowing new algorithms to be developed and plugged in. Frame-to-frame registration is performed by a feature-tracking algorithm which employs RANSAC to discard outlying matches. MTI is performed via a fast and robust three frame differencing algorithm. The user interface and exploitation functions are simple, easy to learn and use. RAVE is a capable exploitation tool that meets the needs of SUAV users despite their challenging environment.

  4. The Aeronautics Education, Research, and Industry Alliance (AERIAL) 2002 Report

    NASA Technical Reports Server (NTRS)

    Bowen, Brent D.; Box, Richard C.; Fink, Mary; Gogos, George; Lehrer, Henry R.; Narayanan, Ram M.; Nickerson, Jocelyn S.; Tarry, Scott E.; Vlasek, Karisa D.; O'Neil, Patrick D.

    2002-01-01

    The NASA Nebraska Space Grant Consortium (NSGC) & EPSCoR programs at the University of Nebraska at Omaha are involved in a variety of innovative research activities. Such research is supported through the Aeronautics Education, Research, and Industry Alliance (AERIAL) and collaborative seed funds. AERIAL is a comprehensive, multi-faceted, five year NASA EPSCoR initiative that contributes substantially to the strategic research and technology priorities of NASA while intensifying Nebraska s rapidly growing aeronautics research and development endeavors. AERIAL includes three major collaborative research teams (CRTs) whose nexus is a common focus in aeronautics research. Each CRT - Small Aircraft Transportation System (SATS), Airborne Remote Sensing for Agricultural Research and Commercialization Applications (ARS), and Numerical Simulation of the Combustion of Fuel Droplets: Finite Rate Kinetics and Flame Zone Grid Adaptation (CEFD) -has a distinct research agenda. This program provides the template for funding of new and innovative research that emphasizes aerospace technology.

  5. Radiological Disaster Simulators for Field and Aerial Measurements

    SciTech Connect

    H. W. Clark, Jr

    2002-11-01

    Simulators have been developed to dramatically improve the fidelity of play for field monitors and aircraft participating in radiological disaster drills and exercises. Simulated radiological measurements for the current Global Positioning System (GPS) location are derived from realistic models of radiological consequences for accidents and malicious acts. The aerial version outputs analog pulses corresponding to the signal that would be produced by various NaI (Tl) detectors at that location. The field monitor version reports the reading for any make/model of survey instrument selected. Position simulation modes are included in the aerial and field versions. The aerial version can generate a flight path based on input parameters or import an externally generated sequence of latitude and longitude coordinates. The field version utilizes a map-based point and click/drag interface to generate individual or a sequence of evenly spaced instrument measurements.

  6. Exploration of Titan Using Vertical Lift Aerial Vehicles

    NASA Technical Reports Server (NTRS)

    Young, L. A.

    2001-01-01

    Autonomous vertical lift aerial vehicles (such as rotorcraft or powered-lift vehicles) hold considerable potential for supporting planetary science and exploration missions. Vertical lift aerial vehicles would have the following advantages/attributes for planetary exploration: (1) low-speed and low-altitude detailed aerial surveys; (2) remote-site sample return to lander platforms; (3) precision placement of scientific probes; (4) soft landing capability for vehicle reuse (multiple flights) and remote-site monitoring; (5) greater range, speed, and access to hazardous terrain than a surface rover; and (6) greater resolution of surface details than an orbiter or balloons. Exploration of Titan presents an excellent opportunity for the development and usage of such vehicles. Additional information is contained in the original extended abstract.

  7. Aerospace toxicology overview: aerial application and cabin air quality.

    PubMed

    Chaturvedi, Arvind K

    2011-01-01

    Aerospace toxicology is a rather recent development and is closely related to aerospace medicine. Aerospace toxicology can be defined as a field of study designed to address the adverse effects of medications, chemicals, and contaminants on humans who fly within or outside the atmosphere in aviation or on space flights. The environment extending above and beyond the surface of the Earth is referred to as aerospace. The term aviation is frequently used interchangeably with aerospace. The focus of the literature review performed to prepare this paper was on aerospace toxicology-related subject matters, aerial application and aircraft cabin air quality. Among the important topics addressed are the following: · Aerial applications of agricultural chemicals, pesticidal toxicity, and exposures to aerially applied mixtures of chemicals and their associated formulating solvents/surfactants The safety of aerially encountered chemicals and the bioanalytical methods used to monitor exposures to some of them · The presence of fumes and smoke, as well as other contaminants that may generally be present in aircraft/space vehicle cabin air · And importantly, the toxic effects of aerially encountered contaminants, with emphasis on the degradation products of oils, fluids, and lubricants used in aircraft, and finally · Analytical methods used for monitoring human exposure to CO and HCN are addressed in the review, as are the signs and symptoms associated with exposures to these combustion gases. Although many agricultural chemical monitoring studies have been published, few have dealt with the occurrence of such chemicals in aircraft cabin air. However, agricultural chemicals do appear in cabin air; indeed, attempts have been made to establish maximum allowable concentrations for several of the more potentially toxic ones that are found in aircraft cabin air. In this article, I emphasize the need for precautionary measures to be taken to minimize exposures to aerially

  8. Spectral anomaly methods for aerial detection using KUT nuisance rejection

    NASA Astrophysics Data System (ADS)

    Detwiler, R. S.; Pfund, D. M.; Myjak, M. J.; Kulisek, J. A.; Seifert, C. E.

    2015-06-01

    This work discusses the application and optimization of a spectral anomaly method for the real-time detection of gamma radiation sources from an aerial helicopter platform. Aerial detection presents several key challenges over ground-based detection. For one, larger and more rapid background fluctuations are typical due to higher speeds, larger field of view, and geographically induced background changes. As well, the possible large altitude or stand-off distance variations cause significant steps in background count rate as well as spectral changes due to increased gamma-ray scatter with detection at higher altitudes. The work here details the adaptation and optimization of the PNNL-developed algorithm Nuisance-Rejecting Spectral Comparison Ratios for Anomaly Detection (NSCRAD), a spectral anomaly method previously developed for ground-based applications, for an aerial platform. The algorithm has been optimized for two multi-detector systems; a NaI(Tl)-detector-based system and a CsI detector array. The optimization here details the adaptation of the spectral windows for a particular set of target sources to aerial detection and the tailoring for the specific detectors. As well, the methodology and results for background rejection methods optimized for the aerial gamma-ray detection using Potassium, Uranium and Thorium (KUT) nuisance rejection are shown. Results indicate that use of a realistic KUT nuisance rejection may eliminate metric rises due to background magnitude and spectral steps encountered in aerial detection due to altitude changes and geographically induced steps such as at land-water interfaces.

  9. Knowledge-based understanding of aerial surveillance video

    NASA Astrophysics Data System (ADS)

    Cheng, Hui; Butler, Darren

    2006-05-01

    Aerial surveillance has long been used by the military to locate, monitor and track the enemy. Recently, its scope has expanded to include law enforcement activities, disaster management and commercial applications. With the ever-growing amount of aerial surveillance video acquired daily, there is an urgent need for extracting actionable intelligence in a timely manner. Furthermore, to support high-level video understanding, this analysis needs to go beyond current approaches and consider the relationships, motivations and intentions of the objects in the scene. In this paper we propose a system for interpreting aerial surveillance videos that automatically generates a succinct but meaningful description of the observed regions, objects and events. For a given video, the semantics of important regions and objects, and the relationships between them, are summarised into a semantic concept graph. From this, a textual description is derived that provides new search and indexing options for aerial video and enables the fusion of aerial video with other information modalities, such as human intelligence, reports and signal intelligence. Using a Mixture-of-Experts video segmentation algorithm an aerial video is first decomposed into regions and objects with predefined semantic meanings. The objects are then tracked and coerced into a semantic concept graph and the graph is summarized spatially, temporally and semantically using ontology guided sub-graph matching and re-writing. The system exploits domain specific knowledge and uses a reasoning engine to verify and correct the classes, identities and semantic relationships between the objects. This approach is advantageous because misclassifications lead to knowledge contradictions and hence they can be easily detected and intelligently corrected. In addition, the graph representation highlights events and anomalies that a low-level analysis would overlook.

  10. Wafer weak point detection based on aerial images or WLCD

    NASA Astrophysics Data System (ADS)

    Ning, Guoxiang; Philipp, Peter; Litt, Lloyd C.; Ackmann, Paul; Crell, Christian; Chen, Norman

    2015-10-01

    Aerial image measurement is a key technique for model based optical proximity correction (OPC) verification. Actual aerial images obtained by AIMS (aerial image measurement system) or WLCD (wafer level critical dimension) can detect printed wafer weak point structures in advance of wafer exposure and defect inspection. Normally, the potential wafer weak points are determined based on optical rule check (ORC) simulation in advance. However, the correlation to real wafer weak points is often not perfect due to the contribution of mask three dimension (M3D) effects, actual mask errors, and scanner lens effects. If the design weak points can accurately be detected in advance, it will reduce the wafer fab cost and improve cycle time. WLCD or AIMS tools are able to measure the aerial images CD and bossung curve through focus window. However, it is difficult to detect the wafer weak point in advance without defining selection criteria. In this study, wafer weak points sensitive to mask mean-to-nominal values are characterized for a process with very high MEEF (normally more than 4). Aerial image CD uses fixed threshold to detect the wafer weak points. By using WLCD through threshold and focus window, the efficiency of wafer weak point detection is also demonstrated. A novel method using contrast range evaluation is shown in the paper. Use of the slope of aerial images for more accurate detection of the wafer weak points using WLCD is also discussed. The contrast range can also be used to detect the wafer weak points in advance. Further, since the mean to nominal of the reticle contributes to the effective contrast range in a high MEEF area this work shows that control of the mask error is critical for high MEEF layers such as poly, active and metal layers. Wafer process based weak points that cannot be detected by wafer lithography CD or WLCD will be discussed.

  11. A review of the meteorological parameters which affect aerial application

    NASA Technical Reports Server (NTRS)

    Christensen, L. S.; Frost, W.

    1979-01-01

    The ambient wind field and temperature gradient were found to be the most important parameters. Investigation results indicated that the majority of meteorological parameters affecting dispersion were interdependent and the exact mechanism by which these factors influence the particle dispersion was largely unknown. The types and approximately ranges of instrumented capabilities for a systematic study of the significant meteorological parameters influencing aerial applications were defined. Current mathematical dispersion models were also briefly reviewed. Unfortunately, a rigorous dispersion model which could be applied to aerial application was not available.

  12. Supporting Remote Sensing Research with Small Unmanned Aerial Systems

    NASA Astrophysics Data System (ADS)

    Anderson, R. C.; Shanks, P. C.; Kritis, L. A.; Trani, M. G.

    2014-11-01

    We describe several remote sensing research projects supported with small Unmanned Aerial Systems (sUAS) operated by the NGA Basic and Applied Research Office. These sUAS collections provide data supporting Small Business Innovative Research (SBIR), NGA University Research Initiative (NURI), and Cooperative Research And Development Agreements (CRADA) efforts in addition to inhouse research. Some preliminary results related to 3D electro-optical point clouds are presented, and some research goals discussed. Additional details related to the autonomous operational mode of both our multi-rotor and fixed wing small Unmanned Aerial System (sUAS) platforms are presented.

  13. A study of methods for lowering aerial environmental survey cost

    NASA Technical Reports Server (NTRS)

    Stansberry, J. R.

    1973-01-01

    The results are presented of a study of methods for lowering the cost of environmental aerial surveys. A wide range of low cost techniques were investigated for possible application to current pressing urban and rural problems. The objective of the study is to establish a definition of the technical problems associated with conducting aerial surveys using various low cost techniques, to conduct a survey of equipment which may be used in low cost systems, and to establish preliminary estimates of cost. A set of candidate systems were selected and described for the environmental survey tasks.

  14. Review of the SAFARI 2000 RC-10 Aerial Photography

    NASA Technical Reports Server (NTRS)

    Myers, Jeff; Shelton, Gary; Annegarn, Harrold; Peterson, David L. (Technical Monitor)

    2001-01-01

    This presentation will review the aerial photography collected by the NASA ER-2 aircraft during the SAFARI (Southern African Regional Science Initiative) year 2000 campaign. It will include specifications on the camera and film, and will show examples of the imagery. It will also detail the extent of coverage, and the procedures to obtain film products from the South African government. Also included will be some sample applications of aerial photography for various environmental applications, and its use in augmenting other SAFARI data sets.

  15. Application of Adaptive Autopilot Designs for an Unmanned Aerial Vehicle

    NASA Technical Reports Server (NTRS)

    Shin, Yoonghyun; Calise, Anthony J.; Motter, Mark A.

    2005-01-01

    This paper summarizes the application of two adaptive approaches to autopilot design, and presents an evaluation and comparison of the two approaches in simulation for an unmanned aerial vehicle. One approach employs two-stage dynamic inversion and the other employs feedback dynamic inversions based on a command augmentation system. Both are augmented with neural network based adaptive elements. The approaches permit adaptation to both parametric uncertainty and unmodeled dynamics, and incorporate a method that permits adaptation during periods of control saturation. Simulation results for an FQM-117B radio controlled miniature aerial vehicle are presented to illustrate the performance of the neural network based adaptation.

  16. Digital aerial-triangulation system on personal computers

    NASA Astrophysics Data System (ADS)

    Tseng, Yi-Hsing; Chang, Shau-Yen

    1994-08-01

    This paper demonstrates a prototype of a PC-based digital aerial-triangulation system (PC- DATS). The system takes all of the procedures of aerial triangulation and is constructed by five working modules: preparation, interior orientation, tie point measurement, target point measurement, and bundle adjustment. All of the modules are integrated on the platform Microsoft-Windows. A test block containing 15 photos was processed by using the system. The operation was quite smooth, and the adjustment result shows an accuracy of about 0.3 pixel in average. The success of this proto-DATS was quite encouraging.

  17. Towards aerial natural gas leak detection system based on TDLAS

    NASA Astrophysics Data System (ADS)

    Liu, Shuyang; Zhou, Tao; Jia, Xiaodong

    2014-11-01

    Pipeline leakage is a complex scenario for sensing system due to the traditional high cost, low efficient and labor intensive detection scheme. TDLAS has been widely accepted as industrial trace gas detection method and, thanks to its high accuracy and reasonable size, it has the potential to meet pipeline gas leakage detection requirements if it combines with the aerial platform. Based on literature study, this paper discussed the possibility of applying aerial TDLAS principle in pipeline gas leak detection and the key technical foundation of implementing it. Such system is able to result in a high efficiency and accuracy measurement which will provide sufficient data in time for the pipeline leakage detection.

  18. Aeronautic Instruments. Section VI : Aerial Navigation and Navigating Instruments

    NASA Technical Reports Server (NTRS)

    Eaton, H N

    1923-01-01

    This report outlines briefly the methods of aerial navigation which have been developed during the past few years, with a description of the different instruments used. Dead reckoning, the most universal method of aerial navigation, is first discussed. Then follows an outline of the principles of navigation by astronomical observation; a discussion of the practical use of natural horizons, such as sea, land, and cloud, in making extant observations; the use of artificial horizons, including the bubble, pendulum, and gyroscopic types. A description is given of the recent development of the radio direction finder and its application to navigation.

  19. Preliminary assessment of aerial photography techniques for canvasback population analysis

    USGS Publications Warehouse

    Munro, R.E.; Trauger, D.L.

    1976-01-01

    Recent intensive research on the canvasback has focused attention on the need for more precise estimates of population parameters. During the 1972-75 period, various types of aerial photographing equipment were evaluated to determine the problems and potentials for employing these techniques in appraisals of canvasback populations. The equipment and procedures available for automated analysis of aerial photographic imagery were also investigated. Serious technical problems remain to be resolved, but some promising results were obtained. Final conclusions about the feasibility of operational implementation await a more rigorous analysis of the data collected.

  20. 77 FR 35962 - Utilizing Rapidly Deployable Aerial Communications Architecture in Response to an Emergency

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-15

    ... COMMISSION Utilizing Rapidly Deployable Aerial Communications Architecture in Response to an Emergency AGENCY... seeks comment on the role of deployable aerial communications architecture (DACA) in facilitating... on the role of DACA, the communication service architecture and various DACA platform...

  1. The Role of Unmanned Aerial Systems-Sensors in Air Quality Research

    EPA Science Inventory

    The use of unmanned aerial systems (UASs) and miniaturized sensors for a variety of scientific and security purposes has rapidly increased. UASs include aerostats (tethered balloons) and remotely controlled, unmanned aerial vehicles (UAVs) including lighter-than-air vessels, fix...

  2. An automatic high precision registration method between large area aerial images and aerial light detection and ranging data

    NASA Astrophysics Data System (ADS)

    Du, Q.; Xie, D.; Sun, Y.

    2015-06-01

    The integration of digital aerial photogrammetry and Light Detetion And Ranging (LiDAR) is an inevitable trend in Surveying and Mapping field. We calculate the external orientation elements of images which identical with LiDAR coordinate to realize automatic high precision registration between aerial images and LiDAR data. There are two ways to calculate orientation elements. One is single image spatial resection using image matching 3D points that registered to LiDAR. The other one is Position and Orientation System (POS) data supported aerotriangulation. The high precision registration points are selected as Ground Control Points (GCPs) instead of measuring GCPs manually during aerotriangulation. The registration experiments indicate that the method which registering aerial images and LiDAR points has a great advantage in higher automation and precision compare with manual registration.

  3. Autonomous Aerial Sensors for Wind Power Meteorology

    NASA Astrophysics Data System (ADS)

    Giebel, Gregor; Schmidt Paulsen, Uwe; Reuder, Joachim; La Cour-Harbo, Anders; Thomsen, Carsten; Bange, Jens; Buschmann, Marco

    2010-05-01

    This poster describes a new approach for measurements in wind power meteorology using small unmanned flying platforms. During a week of flying a lighter-than-air vehicle, two small electrically powered aeroplanes and a larger helicopter at the Risø test station at Høvsøre, we will compare wind speed measurements with fixed mast and LIDAR measurements, investigate optimal flight patterns for each measurement task, and measure other interesting meteorological features like the air-sea boundary in the vicinity of the wind farm. In order to prepare the measurement campaign, a workshop is held, soliciting input from various communities. Large-scale wind farms, especially offshore, need an optimisation between installed wind power density and the losses in the wind farm due to wake effects between the turbines. While the wake structure behind single wind turbines onshore is fairly well understood, there are different problems offshore, thought to be due mainly to the low turbulence. Good measurements of the wake and wake structure are not easy to come by, as the use of a met mast is static and expensive, while the use of remote sensing instruments either needs significant access to the turbine to mount an instrument, or is complicated to use on a ship due to the ship's own movement. In any case, a good LIDAR or SODAR will cost many tens of thousands of euros. Another current problem in wind energy is the coming generation of wind turbines in the 10-12 MW class, with tip heights of over 200 m. Very few measurement masts exist to verify our knowledge of atmospheric physics - all that is known is that the boundary layer description we used so far is not valid any more. Here, automated Unmanned Aerial Vehicles (UAVs) could be used as either an extension of current high masts or to build a network of very high ‘masts' in a region of complex terrain or coastal flow conditions. In comparison to a multitude of high masts, UAVs could be quite cost-effective. In order to test

  4. Off-the-Wall Project Brings Aerial Mapping down to Earth

    ERIC Educational Resources Information Center

    Davidhazy, Andrew

    2008-01-01

    The technology of aerial photography, photogrametry, has widespread applications in mapping and aerial surveying. A multi-billion-dollar industry, aerial surveying and mapping is "big business" in both civilian and military sectors. While the industry has grown increasingly automated, employment opportunities still exist for people with a basic…

  5. The Ground Control Room as an Enabling Technology in the Unmanned Aerial System

    NASA Technical Reports Server (NTRS)

    Gear, Gary; Mace, Thomas

    2007-01-01

    This viewgraph presentation reviews the development of the ground control room as an required technology for the use of an Unmanned Aerial system. The Unmanned Aerial system is a strategic component of the Global Observing System, which will serve global science needs. The unmanned aerial system will use the same airspace as manned aircraft, therefore there will be unique telemetry needs.

  6. Ground-based spectral reflectance measurements for evaluating the efficacy of aerially-applied glyphosate treatments

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Aerial application of herbicides is a common tool in agricultural field management. The objective of this study was to evaluate the efficacy of glyphosate herbicide applied aerially with both conventional and emerging aerial nozzle technologies. A Texas A&M University Plantation weed field was set...

  7. Current status and future directions of precision agriculture for aerial application in the USA

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Precision aerial application in the USA is less than a decade old since the development of the first variable-rate aerial application system. Many areas of the United States rely on readily available agricultural airplanes or helicopters for pest management. Variable-rate aerial application provides...

  8. Ground-based spectral reflectance measurements for efficacy evaluation of aerially applied glyphosate treatments

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Aerial application of herbicides is a common tool in agricultural field management. The objective of this study was to evaluate the efficacy of glyphosate herbicide applied aerially with both conventional and emerging aerial nozzle technologies. A Texas A&M University Plantation weed field was set u...

  9. Assessing crop injury caused by aerially applied glyphosate drift using spray sampling

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Crop injury caused by off-target drift of aerially applied glyphosate is of great concern to farmers and aerial applicators. An experiment was conducted in 2009 to determine the extent of injury due to near-field glyphosate drift from aerial application to glyphosate-sensitive cotton, corn and soybe...

  10. Unmanned aerial vehicles for rangeland mapping and monitoring: a comparison of two systems

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Aerial photography from unmanned aerial vehicles (UAVs) bridges the gap between ground-based observations and remotely sensed imagery from aerial and satellite platforms. UAVs can be deployed quickly and repeatedly, are less costly and safer than piloted aircraft, and can obtain very high-resolution...

  11. Using Unmanned Aerial Vehicles for monitoring glacial moulins

    NASA Astrophysics Data System (ADS)

    Santagata, Tommaso

    2016-04-01

    The exploration of cavities on glaciers has always represented a fascinating activity that attracts scientists and researchers since many decades. Several explorations performed by speleologists and scientists since 1985 on the Gorner Gletscher (Mount Rosa group, SW Switzerland) have allowed to survey more than 40 endoglacial caves and some marginal tunnels of this glacier, which is the most interesting in the Alps for its supraglacial and englacial pseudo-karst forms. In recent years, the study of these caves has led to the distinction of two morphological and genetic types: marginal tunnels, that generally forms at the contact between ice and lateral moraine, and swallow holes (moulins) which are vertical shafts where a supraglacial stream sinks into the ice. During the first International glacier-caving camp organized in October 2014 as part of the project "Inside the glaciers" which had the main objective to explore the cavities of this glacier and to study the cryo-karstic processes that lead to the formation of deep shafts, an unmanned aerial vehicle (UAV) equipped with camera and GPS system was used for the first time to perform photogrammetric surveys on three different areas. This technique allowed to derive detailed 3D models with very high resolution and accuracy of the entrance of the main moulins and other interesting parts of this glacier. Thanks to the acquisition of geo-referenced images and post-processing the acquired data (i.e. motion corrections), with the realized 3D point clouds and mesh models it was possible to obtain geo-referenced ortophoto and digital surface models which have been used to calculate contour lines and calculate the difference of position of the same moulins detected during the last years expeditions. Moreover, the data acquired have allowed to perform other different type of surface analysis and obtain an excellent photographic database that will surely be useful for further comparisons in future, proving the importance of

  12. 6. AERIAL VIEW LOOKING NORTHWEST SHOWING SALVAGE ARCHAEOLOGY TRENCH, ERECTING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. AERIAL VIEW LOOKING NORTHWEST SHOWING SALVAGE ARCHAEOLOGY TRENCH, ERECTING SHOP, ADMINISTRATION BUILDING, FITTING SHOP, MILLWRIGHT SHOP. DOLPHIN MANUFACTURING CO. AND BARBOUR FLAX SPINNING CO. IN LOWER LEFT, SUM HYDROELECTRIC IN UPPER RIGHT. - Rogers Locomotive & Machine Works, Spruce & Market Streets, Paterson, Passaic County, NJ

  13. 1. AERIAL VIEW TO WEST OF COAST GUARD AIR STATION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. AERIAL VIEW TO WEST OF COAST GUARD AIR STATION SAN FRANCISCO, SHOWING ALL MAJOR BUILDINGS. 8X10 black and white silver gelatin print. United States Coast Guard, February 1962. - U.S. Coast Guard Air Station San Francisco, 1020 North Access Road, San Francisco, San Francisco County, CA

  14. 2. AERIAL VIEW TO SOUTHEAST OF COAST GUARD AIR STATION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. AERIAL VIEW TO SOUTHEAST OF COAST GUARD AIR STATION SAN FRANCISCO, SHOWING ALL MAJOR BUILDINGS. 8X10 black and white silver gelatin print. United States Coast Guard, February 1962. - U.S. Coast Guard Air Station San Francisco, 1020 North Access Road, San Francisco, San Francisco County, CA

  15. 4. AERIAL VIEW TO SOUTHEAST OF ENTIRE COAST GUARD AIR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. AERIAL VIEW TO SOUTHEAST OF ENTIRE COAST GUARD AIR STATION SAN FRANCISCO. 8X10 black and white silver gelatin print. United States Coast Guard Official Photograph, 12th District, File No. 62751-22 A.S. Date unknown. - U.S. Coast Guard Air Station San Francisco, 1020 North Access Road, San Francisco, San Francisco County, CA

  16. 5. AERIAL VIEW TO NORTHEAST OF ENTIRE COAST GUARD AIR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. AERIAL VIEW TO NORTHEAST OF ENTIRE COAST GUARD AIR STATION SAN FRANCISCO. 8X10 black and white silver gelatin print. United States Coast Guard Official Photograph, 12th Coast Guard District, San Francisco. 1960. - U.S. Coast Guard Air Station San Francisco, 1020 North Access Road, San Francisco, San Francisco County, CA

  17. Use of aerial thermography in Canadian energy conservation programs

    NASA Technical Reports Server (NTRS)

    Cihlar, J.; Brown, R. J.; Lawrence, G.; Barry, J. N.; James, R. B.

    1977-01-01

    Recent developments in the use of aerial thermography in energy conservation programs within Canada were summarized. Following a brief review of studies conducted during the last three years, methodologies of data acquisition, processing, analysis and interpretation was discussed. Examples of results from an industrial oriented project were presented and recommendations for future basic work were outlined.

  18. 17. CAPE COD AIR STATION PAVE PAWS FACILITY AERIAL VIEW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. CAPE COD AIR STATION PAVE PAWS FACILITY AERIAL VIEW WITH PROJECT NEARING COMPLETION. VIEW SHOWS "A" FACE (LEFT) AND "B" FACE OF RADAR ARRAY SYSTEM. NOTE THAT NORTH IS GENERALLY TO RIGHT OF VIEW. - Cape Cod Air Station, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

  19. 47. CAPE COD AIR STATION PAVE PAWS FACILITY AERIAL VIEW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    47. CAPE COD AIR STATION PAVE PAWS FACILITY AERIAL VIEW OF "A" FACE (LEFT) WITH CLEANING SYSTEM INSTALLED (NOW REMOVED) AND "B" FACE (RIGHT) WITH CONSTRUCTION CRANE IN USE. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

  20. 9. Historic aerial photo of rocket engine test facility complex, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. Historic aerial photo of rocket engine test facility complex, June 11, 1965. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA GRC photo number C-65-1270. - Rocket Engine Testing Facility, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

  1. 8. Historic aerial photo of rocket engine test facility complex, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. Historic aerial photo of rocket engine test facility complex, June 11, 1965. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA GRC photo number C-65-1271. - Rocket Engine Testing Facility, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

  2. 2. AERIAL VIEW SHOWING AQUEDUCT RIGHTOFWAY PASSING OVER RAILROAD LINE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. AERIAL VIEW SHOWING AQUEDUCT RIGHT-OF-WAY PASSING OVER RAILROAD LINE FROM STONE QUARRY. TRACKS ARE GONE BUT RIGHT-OF-WAY IS STILL VISIBLE. - Old Croton Aqueduct, Quarry Railroad Bridge, Aqueduct Lane at Williams Street, Hastings-on-Hudson, Westchester County, NY

  3. AERIAL VIEW OF MAIN PROCESSING BUILDING SHOWING CONSTRUCTION PROGRESS AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AERIAL VIEW OF MAIN PROCESSING BUILDING SHOWING CONSTRUCTION PROGRESS AND EXCAVATION FOR LABORATORY ON LEFT. INL PHOTO NUMBER NRTS-51-1759. Unknown Photographer, 3/28/1951 - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

  4. AERIAL VIEW OF BUILDING 991, LOOKING WEST. BUILDING 991 WAS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AERIAL VIEW OF BUILDING 991, LOOKING WEST. BUILDING 991 WAS DESIGNED FOR SHIPPING AND RECEIVING AND FOR FINAL ASSEMBLY OF WEAPON COMPONENTS. (6/26/91) - Rocky Flats Plant, Final Assembly & Shipping, Eastern portion of plant site, south of Spruce Avenue, east of Tenth Street & north of Central Avenue, Golden, Jefferson County, CO

  5. 3. Lower end of the Old Crosscut Canal, aerial view ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. Lower end of the Old Crosscut Canal, aerial view to north. The Old Crosscut runs top left to lower right, west of meat packing plant and stockyards. Photographer unknown, c. 1939. Source: Pueblo Grande Museum Cultural Park. - Old Crosscut Canal, North Side of Salt River, Phoenix, Maricopa County, AZ

  6. 1. Aerial plan view of Longacres in 1936. (This photograph ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Aerial plan view of Longacres in 1936. (This photograph is an 8x10' enlargement made from a 4x5' two-step duplicate negative. The original negative is in the collection of The Boeing Co., Renton, WA. Photograph by Walker and Associates, Seattle, WA.) - Longacres, 1621 Southwest Sixteenth Street, Renton, King County, WA

  7. 2. Aerial plan view of Longacres in January 1991. (This ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. Aerial plan view of Longacres in January 1991. (This photograph is an 8x10' enlargement made from a 4x5' two-step duplicate negative. The original color negative is in the collection of The Boeing Co., Renton, WA. Photograph by Nies Mapping Group, Bellevue, WA.) - Longacres, 1621 Southwest Sixteenth Street, Renton, King County, WA

  8. 3. AERIAL VIEW OF MOBILE LAUNCHER. ON TOP OF LUT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. AERIAL VIEW OF MOBILE LAUNCHER. ON TOP OF LUT SITS A 25 TON HAMMERHEAD CRANE. STRUCTURE ON LEFT SIDE OF LAUNCH PLATFORM IS KNOWN AS A 'MILK STOOL' AND ALLOWS A SATURN 1B ROCKET TO BE USED IN PLACE OF THE SATURN V ROCKET. - Mobile Launcher One, Kennedy Space Center, Titusville, Brevard County, FL

  9. 5. Photographic copy of aerial photo of site c. 1945. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Photographic copy of aerial photo of site c. 1945. Original photo on file at Public Affairs Office (PAO), Naval Undersea Warfare Center (NUWC), Newport, R.I. Copyright-free. - Naval Undersea Warfare Center, East side of Smith & East Streets between Columbia & South Coves, New London, New London County, CT

  10. 6. Photographic copy of aerial photo of site c. 1965. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. Photographic copy of aerial photo of site c. 1965. Original photo on file at (PAO), NUWC, Newport, R.I. Copyright-free. - Naval Undersea Warfare Center, East side of Smith & East Streets between Columbia & South Coves, New London, New London County, CT

  11. 9. Photographic copy of aerial photograph of NUWC, 1993, view ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. Photographic copy of aerial photograph of NUWC, 1993, view northwest. Original color negative no. 093(L)-09212.32 on file at photo lab at NUWC, Newport, R.I. Copyright-free. - Naval Undersea Warfare Center, East side of Smith & East Streets between Columbia & South Coves, New London, New London County, CT

  12. 26. Aerial photograph dated 20 June 1942, showing north end ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. Aerial photograph dated 20 June 1942, showing north end of Gould Island from the southwest. At upper left is firing pier. Shop building and power plant under construction at center. Photo courtesy of Naval Undersea Warfare Center, Division Newport, Rhode Island. - Naval Torpedo Station, Firing Pier, North end of Gould Island in Narragansett Bay, Newport, Newport County, RI

  13. 24. Aerial photograph dated 22 April 1942, showing Gould Island ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    24. Aerial photograph dated 22 April 1942, showing Gould Island from the northeast. Complex under construction includes shop building (large rectangle at north end of island, and firing pier (at far right). Photo courtesy of Naval Undersea Warfare Center, Division Newport, Rhode Island. - Naval Torpedo Station, Firing Pier, North end of Gould Island in Narragansett Bay, Newport, Newport County, RI

  14. Data processing programs for aerial gamma-ray data

    USGS Publications Warehouse

    Duval1, Joseph S.

    1985-01-01

    The U.S. Geological Survey (USGS) uses computer programs to process aerial gamma-ray data; some do editing and data manipulation to allow for corrections. Programs to convert flight-line data to latitude-longitude coordinates are included. Plotting programs include contour plotting, profile plots, and photographic raster plots.

  15. HISTORIC IMAGE: AERIAL VIEW OF THE CEMETERY AND ITS ENVIRONS. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    HISTORIC IMAGE: AERIAL VIEW OF THE CEMETERY AND ITS ENVIRONS. PHOTOGRAPH TAKEN ON 6 APRIL 1968. NCA HISTORY COLLECTION. - Rock Island National Cemetery, Rock Island Arsenal, 0.25 mile north of southern tip of Rock Island, Rock Island, Rock Island County, IL

  16. OVERVIEW OF AERIAL TRAM SUPPORT TOWERS NINE, TEN, AND DEEP ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    OVERVIEW OF AERIAL TRAM SUPPORT TOWERS NINE, TEN, AND DEEP RAVINE,LOOKING SOUTH FROM BREAK OVER TOWER LOCATION. A SINGLE ORE BUCKET HANGS FROM THE CABLE AT CENTER. DEATH VALLEY'S FLOOR IS IN THE DISTANCE (TOP). - Keane Wonder Mine, Park Route 4 (Daylight Pass Cutoff), Death Valley Junction, Inyo County, CA

  17. AERIAL VIEW, LOOKING NORTHEAST TOWARD THE CENTRAL BUSINESS DISTRICT (TOP ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AERIAL VIEW, LOOKING NORTHEAST TOWARD THE CENTRAL BUSINESS DISTRICT (TOP LEFT). - Railroad Reservation, Bounded by Thirty-eighth Street on the east, Sixteenth Street on the west, First Avenue on the north, & First Avenue on the south, Birmingham, Jefferson County, AL

  18. AERIAL VIEW OF MC WANE CAST IRON PIPE, LOOKING WEST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AERIAL VIEW OF MC WANE CAST IRON PIPE, LOOKING WEST TO BIRMINGHAM CITY CENTER. I-20-59 RUNNING DIAGONALLY FROM RIGHT MIDDLE GROUND. L&N RAILROAD TRACKS IN FOREGROUND. - McWane Cast Iron Pipe, 1201 Vanderbilt Road, Birmingham, Jefferson County, AL

  19. DETAIL VIEW OF AERIAL TRAM SUPPORT TOWERS THREE AND FOUR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL VIEW OF AERIAL TRAM SUPPORT TOWERS THREE AND FOUR WITH TOWERS FIVE AND SIX IN THE DISTANCE, LOOKING NORTHEAST. THE TWO INTACT CABLES RUNNING ALONG TOP OF THE TOWERS ARE FIXED. WHILE THE MOVING CABLE IS LYING SLACK ON THE GROUND. - Keane Wonder Mine, Park Route 4 (Daylight Pass Cutoff), Death Valley Junction, Inyo County, CA

  20. 46. HISTORIC AERIAL VIEW LOOKING EAST AT THE REDSTONE TEST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    46. HISTORIC AERIAL VIEW LOOKING EAST AT THE REDSTONE TEST SITE, SHOWING THE TEST STAND, SUPPORT EQUIPMENT, SERVICE AREA AND THE OBSERVATION TANKS BURIED BENEATH THE EARTH MOUND IN THE BACKGROUND. - Marshall Space Flight Center, Redstone Rocket (Missile) Test Stand, Dodd Road, Huntsville, Madison County, AL

  1. 2. AERIAL VIEW, LOOKING WEST, ALONG FIRST AVENUE NORTH, WITH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. AERIAL VIEW, LOOKING WEST, ALONG FIRST AVENUE NORTH, WITH BROWN MARX BUILDING (BOTTOM CENTER TO RIGHT), EMPIRE BUILDING (CENTER TOP) WITH ITS TERRACOTTA-CLAD 20TH STREET AND FIRST AVENUE FACADES, AND JOHN HAND BUILDING - Heaviest Corner on Earth (Commercial), First Avenue, North & Twentieth (20th) Street, North, Birmingham, Jefferson County, AL

  2. Predator foraging altitudes reveal the structure of aerial insect communities.

    PubMed

    Helms, Jackson A; Godfrey, Aaron P; Ames, Tayna; Bridge, Eli S

    2016-01-01

    The atmosphere is populated by a diverse array of dispersing insects and their predators. We studied aerial insect communities by tracking the foraging altitudes of an avian insectivore, the Purple Martin (Progne subis). By attaching altitude loggers to nesting Purple Martins and collecting prey delivered to their nestlings, we determined the flight altitudes of ants and other insects. We then tested hypotheses relating ant body size and reproductive ecology to flight altitude. Purple Martins flew up to 1,889 meters above ground, and nestling provisioning trips ranged up to 922 meters. Insect communities were structured by body size such that species of all sizes flew near the ground but only light insects flew to the highest altitudes. Ant maximum flight altitudes decreased by 60% from the lightest to the heaviest species. Winged sexuals of social insects (ants, honey bees, and termites) dominated the Purple Martin diet, making up 88% of prey individuals and 45% of prey biomass. By transferring energy from terrestrial to aerial food webs, mating swarms of social insects play a substantial role in aerial ecosystems. Although we focus on Purple Martins and ants, our combined logger and diet method could be applied to a range of aerial organisms. PMID:27352817

  3. FlyAR: augmented reality supported micro aerial vehicle navigation.

    PubMed

    Zollmann, Stefanie; Hoppe, Christof; Langlotz, Tobias; Reitmayr, Gerhard

    2014-04-01

    Micro aerial vehicles equipped with high-resolution cameras can be used to create aerial reconstructions of an area of interest. In that context automatic flight path planning and autonomous flying is often applied but so far cannot fully replace the human in the loop, supervising the flight on-site to assure that there are no collisions with obstacles. Unfortunately, this workflow yields several issues, such as the need to mentally transfer the aerial vehicle’s position between 2D map positions and the physical environment, and the complicated depth perception of objects flying in the distance. Augmented Reality can address these issues by bringing the flight planning process on-site and visualizing the spatial relationship between the planned or current positions of the vehicle and the physical environment. In this paper, we present Augmented Reality supported navigation and flight planning of micro aerial vehicles by augmenting the user’s view with relevant information for flight planning and live feedback for flight supervision. Furthermore, we introduce additional depth hints supporting the user in understanding the spatial relationship of virtual waypoints in the physical world and investigate the effect of these visualization techniques on the spatial understanding. PMID:24650983

  4. Aerial view looking southwest. Seaplane hangars buildings 29 and 68 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Aerial view looking southwest. Seaplane hangars buildings 29 and 68 at right. Location of seaplane ramps is just left of small boat docks in left center. Historic building district in center of photograph. - Naval Air Station North Island, North Island, San Diego, San Diego County, CA

  5. 1. AERIAL VIEW FROM THE SW OF NORTH AVENUE BRIDGE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. AERIAL VIEW FROM THE SW OF NORTH AVENUE BRIDGE TO THE RIGHT. CHICAGO, MILWAUKEE AND ST PAUL 'Z-2' RAILROAD BRIDGE ON RIGHT. - North Avenue Bridge, Spanning North Branch of Chicago River at West North Avenue, Chicago, Cook County, IL

  6. Improved land cover mapping using aerial photographs and satellite images

    NASA Astrophysics Data System (ADS)

    Varga, Katalin; Szabó, Szilárd; Szabó, Gergely; Dévai, György; Tóthmérész, Béla

    2014-10-01

    Manual Land Cover Mapping using aerial photographs provides sufficient level of resolution for detailed vegetation or land cover maps. However, in some cases it is not possible to achieve the desired information over large areas, for example from historical data where the quality and amount of available images is definitely lower than from modern data. The use of automated and semiautomated methods offers the means to identify the vegetation cover using remotely sensed data. In this paper automated methods were tested on aerial photographs and satellite images to extract better and more reliable information about vegetation cover. These testswere performed by using automated analysis of LANDSAT7 images (with and without the surface model of the Shuttle Radar Topography Mission (SRTM)) and two temporally similar aerial photographs. The spectral bands were analyzed with supervised (maximum likelihood) methods. In conclusion, the SRTM and the combination of two temporally similar aerial photographs from earlier years were useful in separating the vegetation cover on a floodplain area. In addition the different date of the vegetation season also gave reliable information about the land cover. High quality information about old and present vegetation on a large area is an essential prerequisites ensuring the conservation of ecosystems

  7. 3. Aerial view southeast, State Route 92 bottom left, Adams ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. Aerial view southeast, State Route 92 bottom left, Adams Dam Road center, Brandywine Creek State Park and J. Chandler Farm in center left, duck pond bottom right and reservoir bottom left. - Winterthur Farms, Intersection State Routes 92 & 100, Intersection State Routes 92 & 100, Winterthur, New Castle County, DE

  8. 4. Aerial view southwest, Adams Dam Road bottom left, State ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. Aerial view southwest, Adams Dam Road bottom left, State Route 100 center, back gates to Winterthur and Wilmington Country Club upper center, duck pond and reservoir bottom right and center, and State Route 92 center bottom. - Winterthur Farms, Intersection State Routes 92 & 100, Intersection State Routes 92 & 100, Winterthur, New Castle County, DE

  9. 2. Aerial view northeast, State Route 92 bottom left and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. Aerial view northeast, State Route 92 bottom left and State Route 100 center, Brandywine Creek State Park center right, duck pond and reservoir center bottom. - Winterthur Farms, Intersection State Routes 92 & 100, Intersection State Routes 92 & 100, Winterthur, New Castle County, DE

  10. 1. Aerial view northnortheast, State Route 92 center left and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Aerial view north-northeast, State Route 92 center left and State Route 100 on right, duck pond, reservoir and farm complex buildings center bottom. - Winterthur Farms, Intersection State Routes 92 & 100, Intersection State Routes 92 & 100, Winterthur, New Castle County, DE

  11. 6. Aerial view northwest, State Route 100 bottom left and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. Aerial view northwest, State Route 100 bottom left and center, Winterthur Train Station center left, Winterthur Farms dairy barns upper center , duck pond and reservoir center, State Route 92 center right, and Brandywine Creek State Park bottom right. - Winterthur Farms, Intersection State Routes 92 & 100, Intersection State Routes 92 & 100, Winterthur, New Castle County, DE

  12. 5. Aerial view west, Adams Dam Road bottom center, State ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Aerial view west, Adams Dam Road bottom center, State Route 100 center, duck pond and reservoir center, State Route 100 center right, State Route 92 below center right, Brandywine Creek State Park center bottom. - Winterthur Farms, Intersection State Routes 92 & 100, Intersection State Routes 92 & 100, Winterthur, New Castle County, DE

  13. U. S. Department of Energy Aerial Measuring Systems

    SciTech Connect

    J. J. Lease

    1998-10-01

    The Aerial Measuring Systems (AMS) is an aerial surveillance system. This system consists of remote sensing equipment to include radiation detectors; multispectral, thermal, radar, and laser scanners; precision cameras; and electronic imaging and still video systems. This equipment, in varying combinations, is mounted in an airplane or helicopter and flown at different heights in specific patterns to gather various types of data. This system is a key element in the US Department of Energy's (DOE) national emergency response assets. The mission of the AMS program is twofold--first, to respond to emergencies involving radioactive materials by conducting aerial surveys to rapidly track and map the contamination that may exist over a large ground area and second, to conduct routinely scheduled, aerial surveys for environmental monitoring and compliance purposes through the use of credible science and technology. The AMS program evolved from an early program, begun by a predecessor to the DOE--the Atomic Energy Commission--to map the radiation that may have existed within and around the terrestrial environments of DOE facilities, which produced, used, or stored radioactive materials.

  14. 48. AERIAL VIEW OF HULL LUMBER CO., INC. LOOKING EAST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    48. AERIAL VIEW OF HULL LUMBER CO., INC. LOOKING EAST TO WEST AND CAPTURING I.P. MILLER LUMBER CO. AT WEST END OF MILL POND. PHOTOGRAPHER: WESTERN WAYS, INC. CORVALLIS, OREGON. DATE: 1949. COURTESY OF RALPH HULL. - Hull-Oakes Lumber Company, 23837 Dawson Road, Monroe, Benton County, OR

  15. 49. AERIAL VIEW OF HULL LUMBER CO., INC. LOOKING FROM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    49. AERIAL VIEW OF HULL LUMBER CO., INC. LOOKING FROM NORTHWEST TO SOUTHEAST. NOTE OPEN BURNING AREA LOWER RIGHT. PHOTOGRAPHER: WESTERN WAYS, INC. CORVALLIS, OREGON. DATE: 1951. COURTESY OF RALPH HULL. - Hull-Oakes Lumber Company, 23837 Dawson Road, Monroe, Benton County, OR

  16. 50. AERIAL VIEW OF HULLOAKES LUMBER CO. LOOKING FROM NORTHWEST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    50. AERIAL VIEW OF HULL-OAKES LUMBER CO. LOOKING FROM NORTHWEST TO SOUTHEAST. NOTE WIGWAM REFUSE BURNER LOWER RIGHT. PHOTOGRAPHER: WESTERN WAYS, INC. CORVALLIS, OREGON. DATE: 1955. COURTESY OF RALPH HULL. - Hull-Oakes Lumber Company, 23837 Dawson Road, Monroe, Benton County, OR

  17. Biological response of soybean and cotton to aerial glyphosate drift

    Technology Transfer Automated Retrieval System (TEKTRAN)

    An aerial application drift study was conducted in 2009 to determine biological effects of glyphosate on cotton (Gossypium hirsutum L.) and soybean [Glycine max (L.) Merr.]. Glyphosate at 866 g ae/ha was applied using an Air Tractor 402B agricultural aircraft in an 18.3 m spray swath to crops at the...

  18. 10. Historic view, Pier 10. Aerial view to east, 1943. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. Historic view, Pier 10. Aerial view to east, 1943. Photographic copy of photo. Boston National Historical Park Archives, Charlestown Navy Yard. BOSTS 8685, USN #SQA466, 8/17/43 - Charlestown Navy Yard, Pier 10, Between Piers 9 & 11 along Mystic River on Charlestown Waterfront at eastern edge of Charlestown Navy Yard, Boston, Suffolk County, MA

  19. 6. Historic view, Pier 9, 10, 11. Aerial Views to ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. Historic view, Pier 9, 10, 11. Aerial Views to east, 1943. Photographic copy of photo. Boston National Historical Park Archives, Charlestown Navy Yard. - Charlestown Navy Yard, Pier 9, Between Piers 8 & 10, along Mystic River on Charlestown Waterfront at eastern edge of Navy Yard, Boston, Suffolk County, MA

  20. 10. Historic view, Pier 11. Aerial view to east, 1943. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. Historic view, Pier 11. Aerial view to east, 1943. Photographic copy of photo. Boston National Historical Park Archives, Charlestown Navy Yard. - Charlestown Navy Yard, Pier 11, Charlestown Waterfront at confluence of Little Mystic Channel & Mystic River at northernmost ent of Navy Yard, Boston, Suffolk County, MA