Science.gov

Sample records for aerospace systems health

  1. Sensor Selection and Optimization for Health Assessment of Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Maul, William A.; Kopasakis, George; Santi, Louis M.; Sowers, Thomas S.; Chicatelli, Amy

    2008-01-01

    Aerospace systems are developed similarly to other large-scale systems through a series of reviews, where designs are modified as system requirements are refined. For space-based systems few are built and placed into service these research vehicles have limited historical experience to draw from and formidable reliability and safety requirements, due to the remote and severe environment of space. Aeronautical systems have similar reliability and safety requirements, and while these systems may have historical information to access, commercial and military systems require longevity under a range of operational conditions and applied loads. Historically, the design of aerospace systems, particularly the selection of sensors, is based on the requirements for control and performance rather than on health assessment needs. Furthermore, the safety and reliability requirements are met through sensor suite augmentation in an ad hoc, heuristic manner, rather than any systematic approach. A review of the current sensor selection practice within and outside of the aerospace community was conducted and a sensor selection architecture is proposed that will provide a justifiable, defendable sensor suite to address system health assessment requirements.

  2. Sensor Selection and Optimization for Health Assessment of Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Maul, William A.; Kopasakis, George; Santi, Louis M.; Sowers, Thomas S.; Chicatelli, Amy

    2007-01-01

    Aerospace systems are developed similarly to other large-scale systems through a series of reviews, where designs are modified as system requirements are refined. For space-based systems few are built and placed into service. These research vehicles have limited historical experience to draw from and formidable reliability and safety requirements, due to the remote and severe environment of space. Aeronautical systems have similar reliability and safety requirements, and while these systems may have historical information to access, commercial and military systems require longevity under a range of operational conditions and applied loads. Historically, the design of aerospace systems, particularly the selection of sensors, is based on the requirements for control and performance rather than on health assessment needs. Furthermore, the safety and reliability requirements are met through sensor suite augmentation in an ad hoc, heuristic manner, rather than any systematic approach. A review of the current sensor selection practice within and outside of the aerospace community was conducted and a sensor selection architecture is proposed that will provide a justifiable, dependable sensor suite to address system health assessment requirements.

  3. Integrated Vehicle Health Management (IVHM) for Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Baroth, Edmund C.; Pallix, Joan

    2006-01-01

    To achieve NASA's ambitious Integrated Space Transportation Program objectives, aerospace systems will implement a variety of new concept in health management. System level integration of IVHM technologies for real-time control and system maintenance will have significant impact on system safety and lifecycle costs. IVHM technologies will enhance the safety and success of complex missions despite component failures, degraded performance, operator errors, and environment uncertainty. IVHM also has the potential to reduce, or even eliminate many of the costly inspections and operations activities required by current and future aerospace systems. This presentation will describe the array of NASA programs participating in the development of IVHM technologies for NASA missions. Future vehicle systems will use models of the system, its environment, and other intelligent agents with which they may interact. IVHM will be incorporated into future mission planners, reasoning engines, and adaptive control systems that can recommend or execute commands enabling the system to respond intelligently in real time. In the past, software errors and/or faulty sensors have been identified as significant contributors to mission failures. This presentation will also address the development and utilization of highly dependable sohare and sensor technologies, which are key components to ensure the reliability of IVHM systems.

  4. Development of lightweight structural health monitoring systems for aerospace applications

    NASA Astrophysics Data System (ADS)

    Pearson, Matthew

    This thesis investigates the development of structural health monitoring systems (SHM) for aerospace applications. The work focuses on each aspect of a SHM system covering novel transducer technologies and damage detection techniques to detect and locate damage in metallic and composite structures. Secondly the potential of energy harvesting and power arrangement methodologies to provide a stable power source is assessed. Finally culminating in the realisation of smart SHM structures. 1. Transducer Technology A thorough experimental study of low profile, low weight novel transducers not normally used for acoustic emission (AE) and acousto-ultrasonics (AU) damage detection was conducted. This included assessment of their performance when exposed to aircraft environments and feasibility of embedding these transducers in composites specimens in order to realise smart structures. 2. Damage Detection An extensive experimental programme into damage detection utilising AE and AU were conducted in both composites and metallic structures. These techniques were used to assess different damage mechanism within these materials. The same transducers were used for novel AE location techniques coupled with AU similarity assessment to successfully detect and locate damage in a variety of structures. 3. Energy Harvesting and Power Management Experimental investigations and numerical simulations were undertaken to assess the power generation levels of piezoelectric and thermoelectric generators for typical vibration and temperature differentials which exist in the aerospace environment. Furthermore a power management system was assessed to demonstrate the ability of the system to take the varying nature of the input power and condition it to a stable power source for a system. 4. Smart Structures The research conducted is brought together into a smart carbon fibre wing showcasing the novel embedded transducers for AE and AU damage detection and location, as well as vibration energy

  5. Controls and Health Management Technologies for Intelligent Aerospace Propulsion Systems

    NASA Technical Reports Server (NTRS)

    Garg, Sanjay

    2004-01-01

    With the increased emphasis on aircraft safety, enhanced performance and affordability, and the need to reduce the environmental impact of aircraft, there are many new challenges being faced by the designers of aircraft propulsion systems. The Controls and Dynamics Technology Branch at NASA (National Aeronautics and Space Administration) Glenn Research Center (GRC) in Cleveland, Ohio, is leading and participating in various projects in partnership with other organizations within GRC and across NASA, the U.S. aerospace industry, and academia to develop advanced controls and health management technologies that will help meet these challenges through the concept of an Intelligent Engine. The key enabling technologies for an Intelligent Engine are the increased efficiencies of components through active control, advanced diagnostics and prognostics integrated with intelligent engine control to enhance component life, and distributed control with smart sensors and actuators in an adaptive fault tolerant architecture. This paper describes the current activities of the Controls and Dynamics Technology Branch in the areas of active component control and propulsion system intelligent control, and presents some recent analytical and experimental results in these areas.

  6. Introduction to System Health Engineering and Management in Aerospace

    NASA Technical Reports Server (NTRS)

    Johnson, Stephen B.

    2005-01-01

    This paper provides a technical overview of Integrated System Health Engineering and Management (ISHEM). We define ISHEM as "the paper provides a techniques, and technologies used to design, analyze, build, verify, and operate a system to prevent faults and/or minimize their effects." This includes design and manufacturing techniques as well operational and managerial methods. ISHEM is not a "purely technical issue" as it also involves and must account for organizational, communicative, and cognitive f&ms of humans as social beings and as individuals. Thus the paper will discuss in more detail why all of these elements, h m the technical to the cognitive and social, are necessary to build dependable human-machine systems. The paper outlines a functional homework and architecture for ISHEM operations, describes the processes needed to implement ISHEM in the system life-cycle, and provides a theoretical framework to understand the relationship between the different aspects of the discipline. It then derives from these and the social and cognitive bases a set of design and operational principles for ISHEM.

  7. Meeting the Challenges of Exploration Systems: Health Management Technologies for Aerospace Systems With Emphasis on Propulsion

    NASA Technical Reports Server (NTRS)

    Melcher, Kevin J.; Sowers, T. Shane; Maul, William A.

    2005-01-01

    The constraints of future Exploration Missions will require unique Integrated System Health Management (ISHM) capabilities throughout the mission. An ambitious launch schedule, human-rating requirements, long quiescent periods, limited human access for repair or replacement, and long communication delays all require an ISHM system that can span distinct yet interdependent vehicle subsystems, anticipate failure states, provide autonomous remediation, and support the Exploration Mission from beginning to end. NASA Glenn Research Center has developed and applied health management system technologies to aerospace propulsion systems for almost two decades. Lessons learned from past activities help define the approach to proper ISHM development: sensor selection- identifies sensor sets required for accurate health assessment; data qualification and validation-ensures the integrity of measurement data from sensor to data system; fault detection and isolation-uses measurements in a component/subsystem context to detect faults and identify their point of origin; information fusion and diagnostic decision criteria-aligns data from similar and disparate sources in time and use that data to perform higher-level system diagnosis; and verification and validation-uses data, real or simulated, to provide variable exposure to the diagnostic system for faults that may only manifest themselves in actual implementation, as well as faults that are detectable via hardware testing. This presentation describes a framework for developing health management systems and highlights the health management research activities performed by the Controls and Dynamics Branch at the NASA Glenn Research Center. It illustrates how those activities contribute to the development of solutions for Integrated System Health Management.

  8. Systems Health Monitoring — From Ground to Air — The Aerospace Challenges

    NASA Astrophysics Data System (ADS)

    Austin, Mary

    2007-03-01

    The aerospace industry and the government are significantly investing in jet engine systems health monitoring. Government organizations such as the Air Force, Navy, Army, National Labs and NASA are investing in the development of state aware sensing for health monitoring of jet engines such as the Joint Strike Fighter, F119 and F100's. This paper will discuss on-going work in systems health monitoring for jet engines. Topics will include a general discussion of the approaches to engine structural health monitoring and the prognosis of engine component life. Real-world implementation challenges on the ground and in the air will be reviewed. The talk will conclude with a prediction of where engine health monitoring will be in twenty years.

  9. Integrated software health management for aerospace guidance, navigation, and control systems: A probabilistic reasoning approach

    NASA Astrophysics Data System (ADS)

    Mbaya, Timmy

    Embedded Aerospace Systems have to perform safety and mission critical operations in a real-time environment where timing and functional correctness are extremely important. Guidance, Navigation, and Control (GN&C) systems substantially rely on complex software interfacing with hardware in real-time; any faults in software or hardware, or their interaction could result in fatal consequences. Integrated Software Health Management (ISWHM) provides an approach for detection and diagnosis of software failures while the software is in operation. The ISWHM approach is based on probabilistic modeling of software and hardware sensors using a Bayesian network. To meet memory and timing constraints of real-time embedded execution, the Bayesian network is compiled into an Arithmetic Circuit, which is used for on-line monitoring. This type of system monitoring, using an ISWHM, provides automated reasoning capabilities that compute diagnoses in a timely manner when failures occur. This reasoning capability enables time-critical mitigating decisions and relieves the human agent from the time-consuming and arduous task of foraging through a multitude of isolated---and often contradictory---diagnosis data. For the purpose of demonstrating the relevance of ISWHM, modeling and reasoning is performed on a simple simulated aerospace system running on a real-time operating system emulator, the OSEK/Trampoline platform. Models for a small satellite and an F-16 fighter jet GN&C (Guidance, Navigation, and Control) system have been implemented. Analysis of the ISWHM is then performed by injecting faults and analyzing the ISWHM's diagnoses.

  10. Aerospace Engineering Systems

    NASA Technical Reports Server (NTRS)

    VanDalsem, William R.; Livingston, Mary E.; Melton, John E.; Torres, Francisco J.; Stremel, Paul M.

    1999-01-01

    Continuous improvement of aerospace product development processes is a driving requirement across much of the aerospace community. As up to 90% of the cost of an aerospace product is committed during the first 10% of the development cycle, there is a strong emphasis on capturing, creating, and communicating better information (both requirements and performance) early in the product development process. The community has responded by pursuing the development of computer-based systems designed to enhance the decision-making capabilities of product development individuals and teams. Recently, the historical foci on sharing the geometrical representation and on configuration management are being augmented: Physics-based analysis tools for filling the design space database; Distributed computational resources to reduce response time and cost; Web-based technologies to relieve machine-dependence; and Artificial intelligence technologies to accelerate processes and reduce process variability. Activities such as the Advanced Design Technologies Testbed (ADTT) project at NASA Ames Research Center study the strengths and weaknesses of the technologies supporting each of these trends, as well as the overall impact of the combination of these trends on a product development event. Lessons learned and recommendations for future activities will be reported.

  11. Dynamic fiber Bragg gratings based health monitoring system of composite aerospace structures

    NASA Astrophysics Data System (ADS)

    Panopoulou, A.; Loutas, T.; Roulias, D.; Fransen, S.; Kostopoulos, V.

    2011-09-01

    The main purpose of the current work is to develop a new system for structural health monitoring of composite aerospace structures based on real-time dynamic measurements, in order to identify the structural state condition. Long-gauge Fibre Bragg Grating (FBG) optical sensors were used for monitoring the dynamic response of the composite structure. The algorithm that was developed for structural damage detection utilizes the collected dynamic response data, analyzes them in various ways and through an artificial neural network identifies the damage state and its location. Damage was simulated by slightly varying locally the mass of the structure (by adding a known mass) at different zones of the structure. Lumped masses in different locations upon the structure alter the eigen-frequencies in a way similar to actual damage. The structural dynamic behaviour has been numerically simulated and experimentally verified by means of modal testing on two different composite aerospace structures. Advanced digital signal processing techniques, e.g. the wavelet transform (WT), were used for the analysis of the dynamic response for feature extraction. WT's capability of separating the different frequency components in the time domain without loosing frequency information makes it a versatile tool for demanding signal processing applications. The use of WT is also suggested by the no-stationary nature of dynamic response signals and the opportunity of evaluating the temporal evolution of their frequency contents. Feature extraction is the first step of the procedure. The extracted features are effective indices of damage size and location. The classification step comprises of a feed-forward back propagation network, whose output determines the simulated damage location. Finally, dedicated training and validation activities were carried out by means of numerical simulations and experimental procedures. Experimental validation was performed initially on a flat stiffened panel

  12. Hardware Specific Integration Strategy for Impedance-Based Structural Health Monitoring of Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Owen, Robert B.; Gyekenyesi, Andrew L.; Inman, Daniel J.; Ha, Dong S.

    2011-01-01

    The Integrated Vehicle Health Management (IVHM) Project, sponsored by NASA's Aeronautics Research Mission Directorate, is conducting research to advance the state of highly integrated and complex flight-critical health management technologies and systems. An effective IVHM system requires Structural Health Monitoring (SHM). The impedance method is one such SHM technique for detection and monitoring complex structures for damage. This position paper on the impedance method presents the current state of the art, future directions, applications and possible flight test demonstrations.

  13. Improved Verification for Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Powell, Mark A.

    2008-01-01

    Aerospace systems are subject to many stringent performance requirements to be verified with low risk. This report investigates verification planning using conditional approaches vice the standard classical statistical methods, and usage of historical surrogate data for requirement validation and in verification planning. The example used in this report to illustrate the results of these investigations is a proposed mission assurance requirement with the concomitant maximum acceptable verification risk for the NASA Constellation Program Orion Launch Abort System (LAS). This report demonstrates the following improvements: 1) verification planning using conditional approaches vice classical statistical methods results in plans that are more achievable and feasible; 2) historical surrogate data can be used to bound validation of performance requirements; and, 3) incorporation of historical surrogate data in verification planning using conditional approaches produces even less costly and more reasonable verification plans. The procedures presented in this report may produce similar improvements and cost savings in verification for any stringent performance requirement for an aerospace system.

  14. Cybersecurity for aerospace autonomous systems

    NASA Astrophysics Data System (ADS)

    Straub, Jeremy

    2015-05-01

    High profile breaches have occurred across numerous information systems. One area where attacks are particularly problematic is autonomous control systems. This paper considers the aerospace information system, focusing on elements that interact with autonomous control systems (e.g., onboard UAVs). It discusses the trust placed in the autonomous systems and supporting systems (e.g., navigational aids) and how this trust can be validated. Approaches to remotely detect the UAV compromise, without relying on the onboard software (on a potentially compromised system) as part of the process are discussed. How different levels of autonomy (task-based, goal-based, mission-based) impact this remote characterization is considered.

  15. Structural Health Management for Future Aerospace Vehicles

    NASA Technical Reports Server (NTRS)

    Prosser, W. H.; Allison, S. G.; Woodard, S. E.; Wincheski, R. A.; Cooper, E. G.; Price, D. C.; Hedley, M.; Prokopenko, M.; Scott, D. A.; Tessler, A.

    2004-01-01

    Structural Health Management (SHM) will be of critical importance to provide the safety, reliability and affordability necessary for the future long duration space missions described in America's Vision for Space Exploration. Long duration missions to the Moon, Mars and beyond cannot be accomplished with the current paradigm of periodic, ground based structural integrity inspections. As evidenced by the Columbia tragedy, this approach is also inadequate for the current Shuttle fleet, thus leading to its initial implementation of on-board SHM sensing for impact detection as part of the return to flight effort. However, future space systems, to include both vehicles as well as structures such as habitation modules, will require an integrated array of onboard in-situ sensing systems. In addition, advanced data systems architectures will be necessary to communicate, store and process massive amounts of SHM data from large numbers of diverse sensors. Further, improved structural analysis and design algorithms will be necessary to incorporate SHM sensing into the design and construction of aerospace structures, as well as to fully utilize these sensing systems to provide both diagnosis and prognosis of structural integrity. Ultimately, structural integrity information will feed into an Integrated Vehicle Health Management (IVHM) system that will provide real-time knowledge of structural, propulsion, thermal protection and other critical systems for optimal vehicle management and mission control. This paper will provide an overview of NASA research and development in the area of SHM as well as to highlight areas of technology improvement necessary to meet these future mission requirements.

  16. Managing complexity of aerospace systems

    NASA Astrophysics Data System (ADS)

    Tamaskar, Shashank

    Growing complexity of modern aerospace systems has exposed the limits of conventional systems engineering tools and challenged our ability to design them in a timely and cost effective manner. According to the US Government Accountability Office (GAO), in 2009 nearly half of the defense acquisition programs are expecting 25% or more increase in unit acquisition cost. Increase in technical complexity has been identified as one of the primary drivers behind cost-schedule overruns. Thus to assure the affordability of future aerospace systems, it is increasingly important to develop tools and capabilities for managing their complexity. We propose an approach for managing the complexity of aerospace systems to address this pertinent problem. To this end, we develop a measure that improves upon the state-of-the-art metrics and incorporates key aspects of system complexity. We address the problem of system decomposition by presenting an algorithm for module identification that generates modules to minimize integration complexity. We demonstrate the framework on diverse spacecraft and show the impact of design decisions on integration cost. The measure and the algorithm together help the designer track and manage complexity in different phases of system design. We next investigate how complexity can be used as a decision metric in the model-based design (MBD) paradigm. We propose a framework for complexity enabled design space exploration that introduces the idea of using complexity as a non-traditional design objective. We also incorporate complexity with the component based design paradigm (a sub-field of MBD) and demonstrate it on several case studies. The approach for managing complexity is a small but significant contribution to the vast field of complexity management. We envision our approach being used in concert with a suite of complexity metrics to provide an ability to measure and track complexity through different stages of design and development. This will not

  17. Information processing for aerospace structural health monitoring

    NASA Astrophysics Data System (ADS)

    Lichtenwalner, Peter F.; White, Edward V.; Baumann, Erwin W.

    1998-06-01

    Structural health monitoring (SHM) technology provides a means to significantly reduce life cycle of aerospace vehicles by eliminating unnecessary inspections, minimizing inspection complexity, and providing accurate diagnostics and prognostics to support vehicle life extension. In order to accomplish this, a comprehensive SHM system will need to acquire data from a wide variety of diverse sensors including strain gages, accelerometers, acoustic emission sensors, crack growth gages, corrosion sensors, and piezoelectric transducers. Significant amounts of computer processing will then be required to convert this raw sensor data into meaningful information which indicates both the diagnostics of the current structural integrity as well as the prognostics necessary for planning and managing the future health of the structure in a cost effective manner. This paper provides a description of the key types of information processing technologies required in an effective SHM system. These include artificial intelligence techniques such as neural networks, expert systems, and fuzzy logic for nonlinear modeling, pattern recognition, and complex decision making; signal processing techniques such as Fourier and wavelet transforms for spectral analysis and feature extraction; statistical algorithms for optimal detection, estimation, prediction, and fusion; and a wide variety of other algorithms for data analysis and visualization. The intent of this paper is to provide an overview of the role of information processing for SHM, discuss various technologies which can contribute to accomplishing this role, and present some example applications of information processing for SHM implemented at the Boeing Company.

  18. Developing IVHM Requirements for Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Rajamani, Ravi; Saxena, Abhinav; Kramer, Frank; Augustin, Mike; Schroeder, John B.; Goebel, Kai; Shao, Ginger; Roychoudhury, Indranil; Lin, Wei

    2013-01-01

    The term Integrated Vehicle Health Management (IVHM) describes a set of capabilities that enable sustainable and safe operation of components and subsystems within aerospace platforms. However, very little guidance exists for the systems engineering aspects of design with IVHM in mind. It is probably because of this that designers have to use knowledge picked up exclusively by experience rather than by established process. This motivated a group of leading IVHM practitioners within the aerospace industry under the aegis of SAE's HM-1 technical committee to author a document that hopes to give working engineers and program managers clear guidance on all the elements of IVHM that they need to consider before designing a system. This proposed recommended practice (ARP6883 [1]) will describe all the steps of requirements generation and management as it applies to IVHM systems, and demonstrate these with a "real-world" example related to designing a landing gear system. The team hopes that this paper and presentation will help start a dialog with the larger aerospace community and that the feedback can be used to improve the ARP and subsequently the practice of IVHM from a systems engineering point-of-view.

  19. NASA Aerospace Flight Battery Systems Program Update

    NASA Technical Reports Server (NTRS)

    Manzo, Michelle; ODonnell, Patricia

    1997-01-01

    The objectives of NASA's Aerospace Flight Battery Systems Program is to: develop, maintain and provide tools for the validation and assessment of aerospace battery technologies; accelerate the readiness of technology advances and provide infusion paths for emerging technologies; provide NASA projects with the required database and validation guidelines for technology selection of hardware and processes relating to aerospace batteries; disseminate validation and assessment tools, quality assurance, reliability, and availability information to the NASA and aerospace battery communities; and ensure that safe, reliable batteries are available for NASA's future missions.

  20. NASA Ames aerospace systems directorate research

    NASA Technical Reports Server (NTRS)

    Albers, James A.

    1991-01-01

    The Aerospace Systems Directorate is one of four research directorates at the NASA Ames Research Center. The Directorate conducts research and technology development for advanced aircraft and aircraft systems in intelligent computational systems and human-machine systems for aeronautics and space. The Directorate manages research and aircraft technology development projects, and operates and maintains major wind tunnels and flight simulation facilities. The Aerospace Systems Directorate's research and technology as it relates to NASA agency goals and specific strategic thrusts are discussed.

  1. Sensor Technology for Integrated Vehicle Health Management of Aerospace Vehicles

    NASA Technical Reports Server (NTRS)

    Prosser, W. H.; Brown, T. L.; Woodard, S. E.; Fleming, G. A.; Cooper, E. G.

    2002-01-01

    NASA is focusing considerable efforts on technology development for Integrated Vehicle Health Management systems. The research in this area is targeted toward increasing aerospace vehicle safety and reliability, while reducing vehicle operating and maintenance costs. Onboard, real-time sensing technologies that can provide detailed information on structural integrity are central to such a health management system. This paper describes a number of sensor technologies currently under development for integrated vehicle health management. The capabilities, current limitations, and future research needs of these technologies are addressed.

  2. Development of Structural Health Management Technology for Aerospace Vehicles

    NASA Technical Reports Server (NTRS)

    Prosser, W. H.

    2003-01-01

    As part of the overall goal of developing Integrated Vehicle Health Management (IVHM) systems for aerospace vehicles, NASA has focused considerable resources on the development of technologies for Structural Health Management (SHM). The motivations for these efforts are to increase the safety and reliability of aerospace structural systems, while at the same time decreasing operating and maintenance costs. Research and development of SHM technologies has been supported under a variety of programs for both aircraft and spacecraft including the Space Launch Initiative, X-33, Next Generation Launch Technology, and Aviation Safety Program. The major focus of much of the research to date has been on the development and testing of sensor technologies. A wide range of sensor technologies are under consideration including fiber-optic sensors, active and passive acoustic sensors, electromagnetic sensors, wireless sensing systems, MEMS, and nanosensors. Because of their numerous advantages for aerospace applications, most notably being extremely light weight, fiber-optic sensors are one of the leading candidates and have received considerable attention.

  3. Light weight, high-speed, and self-powered wireless fiber optic sensor (WiFOS) structural health monitor system for avionics and aerospace environments

    NASA Astrophysics Data System (ADS)

    Mendoza, Edgar A.; Kempen, Cornelia; Sun, Sunjian; Esterkin, Yan

    2014-09-01

    This paper describes recent progress towards the development of an innovative light weight, high-speed, and selfpowered wireless fiber optic sensor (WiFOS™) structural health monitor system suitable for the onboard and in-flight unattended detection, localization, and classification of load, fatigue, and structural damage in advanced composite materials commonly used in avionics and aerospace systems. The WiFOS™ system is based on ROI's advancements on monolithic photonic integrated circuit microchip technology, integrated with smart power management, on-board data processing, wireless data transmission optoelectronics, and self-power using energy harvesting tools such as solar, vibration, thermoelectric, and magneto-electric. The self-powered, wireless WiFOS™ system offers a versatile and powerful SHM tool to enhance the reliability and safety of avionics platforms, jet fighters, helicopters, commercial aircraft that use lightweight composite material structures, by providing comprehensive information about the structural integrity of the structure from a large number of locations. Immediate SHM applications are found in rotorcraft and aircraft, ships, submarines, and in next generation weapon systems, and in commercial oil and petrochemical, aerospace industries, civil structures, power utilities, portable medical devices, and biotechnology, homeland security and a wide spectrum of other applications.

  4. Knowledge-based diagnosis for aerospace systems

    NASA Technical Reports Server (NTRS)

    Atkinson, David J.

    1988-01-01

    The need for automated diagnosis in aerospace systems and the approach of using knowledge-based systems are examined. Research issues in knowledge-based diagnosis which are important for aerospace applications are treated along with a review of recent relevant research developments in Artificial Intelligence. The design and operation of some existing knowledge-based diagnosis systems are described. The systems described and compared include the LES expert system for liquid oxygen loading at NASA Kennedy Space Center, the FAITH diagnosis system developed at the Jet Propulsion Laboratory, the PES procedural expert system developed at SRI International, the CSRL approach developed at Ohio State University, the StarPlan system developed by Ford Aerospace, the IDM integrated diagnostic model, and the DRAPhys diagnostic system developed at NASA Langley Research Center.

  5. NASA aerospace battery systems program update

    NASA Technical Reports Server (NTRS)

    Manzo, Michelle A.; Schulze, Norman R.

    1989-01-01

    An overview of a battery systems program designed to enhance the safety, reliability, and performance of NASA's aerospace primary and secondary batteries as well as battery power systems is presented. The status of research in all three areas is reviewed. The approach to achieving the program objectives involves increasing the fundamental understanding of primary and secondary cells; providing for improved nickel-cadmium manufacturing process control; providing for the establishment of a NASA standard nickel-hydrogen cell design; establishing specifications, design and operational guidelines for both primary and secondary cells and batteries; providing training relating to the above areas; and opening and maintaining communication lines within NASA and the aerospace battery community.

  6. Structures Technology for Future Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Noor, Ahmed K.; Venneri, Samuel L.; Paul, Donald B.; Hopkins, Mark A.

    2000-01-01

    An overview of structures technology for future aerospace systems is given. Discussion focuses on developments in component technologies that will improve the vehicle performance, advance the technology exploitation process, and reduce system life-cycle costs. The component technologies described are smart materials and structures, multifunctional materials and structures, affordable composite structures, extreme environment structures, flexible load bearing structures, and computational methods and simulation-based design. The trends in each of the component technologies are discussed and the applicability of these technologies to future aerospace vehicles is described.

  7. Materials Selection for Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Arnold, Steven M.; Cebon, David; Ashby, Mike

    2012-01-01

    A systematic design-oriented, five-step approach to material selection is described: 1) establishing design requirements, 2) material screening, 3) ranking, 4) researching specific candidates and 5) applying specific cultural constraints to the selection process. At the core of this approach is the definition performance indices (i.e., particular combinations of material properties that embody the performance of a given component) in conjunction with material property charts. These material selection charts, which plot one property against another, are introduced and shown to provide a powerful graphical environment wherein one can apply and analyze quantitative selection criteria, such as those captured in performance indices, and make trade-offs between conflicting objectives. Finding a material with a high value of these indices maximizes the performance of the component. Two specific examples pertaining to aerospace (engine blades and pressure vessels) are examined, both at room temperature and elevated temperature (where time-dependent effects are important) to demonstrate the methodology. The discussion then turns to engineered/hybrid materials and how these can be effectively tailored to fill in holes in the material property space, so as to enable innovation and increases in performance as compared to monolithic materials. Finally, a brief discussion is presented on managing the data needed for materials selection, including collection, analysis, deployment, and maintenance issues.

  8. Integration of pyrotechnics into aerospace systems

    NASA Technical Reports Server (NTRS)

    Bement, Laurence J.; Schimmel, Morry L.

    1993-01-01

    The application of pyrotechnics to aerospace systems has been resisted because normal engineering methods cannot be used in design and evaluation. Commonly used approaches for energy sources, such as electrical, hydraulic and pneumatic, do not apply to explosive and pyrotechnic devices. This paper introduces the unique characteristics of pyrotechnic devices, describes how functional evaluations can be conducted, and demonstrates an engineering approach for pyrotechnic integration. Logic is presented that allows evaluation of two basic types of pyrotechnic systems to demonstrate functional margin.

  9. NASA Aerospace Flight Battery Systems Program

    NASA Technical Reports Server (NTRS)

    Manzo, Michelle A.; O'Donnell, Patricia M.

    1990-01-01

    The major objective of the NASA Aerospace Flight Battery Systems Program is to provide NASA with the policy and posture to increase and ensure the safety, performance and reliability of batteries for space power systems. The program plan has been modified in the past year to reflect changes in the agency's approach to battery related problems that are affecting flight programs. Primary attention in the Battery Program is being devoted to the development of an advanced nickel-cadmium cell design and the qualification of vendors to produce cells for flight programs. As part of a unified Battery Program, the development of a nickel-hydrogen standard and primary cell issues are also being pursued to provide high-performance NASA Standards and space qualified state-of-the-art primary cells. The resolution of issues is being addressed with the full participation of the aerospace battery community.

  10. NASA aerospace flight battery systems program

    NASA Technical Reports Server (NTRS)

    Manzo, Michelle A.; Odonnell, Patricia M.

    1990-01-01

    The major objective of the NASA Aerospace Flight Battery Systems Program is to provide NASA with the policy and posture to increase and ensure the safety, performance and reliability of batteries for space power systems. The program plan has been modified in the past year to reflect changes in the agency's approach to battery related problems that are affecting flight programs. Primary attention in the Battery Program is being devoted to the development of an advanced nickel-cadmium cell design and the qualification of vendors to produce cells for flight programs. As part of a unified Battery Program, the development of a nickel-hydrogen standard and primary cell issues are also being pursued to provide high performance NASA Standards and space qualified state-of-the-art primary cells. The resolution of issues is being addressed with the full participation of the aerospace battery community.

  11. Health monitoring studies on composite structures for aerospace applications

    SciTech Connect

    James, G.; Roach, D.; Hansche, B.; Meza, R.; Robinson, N.

    1996-02-01

    This paper discusses ongoing work to develop structural health monitoring techniques for composite aerospace structures such as aircraft control surfaces, fuselage sections or repairs, and reusable launch vehicle fuel tanks. The overall project is divided into four tasks: Operational evaluation, diagnostic measurements, information condensation, and damage detection. Five composite plates were constructed to study delaminations, disbonds, and fluid retention issues as the initial step in creating an operational system. These four square feet plates were graphite-epoxy with nomex honeycomb cores. The diagnostic measurements are composed of modal tests with a scanning laser vibrometer at over 500 scan points per plate covering the frequency range up to 2000 Hz. This data has been reduced into experimental dynamics matrices using a generic, software package developed at the University of Colorado at Boulder. The continuing effort will entail performing a series of damage identification studies to detect, localize, and determine the extent of the damage. This work is providing understanding and algorithm development for a global NDE technique for composite aerospace structures.

  12. Northrop Grumman Aerospace Systems cryocooler overview

    NASA Astrophysics Data System (ADS)

    Raab, J.; Tward, E.

    2010-09-01

    Mechanical long life cryocoolers are an enabling technology used to cool a wide variety of detectors in space applications. These coolers provide cooling over a range of temperatures from 2 K to 200 K, cooling powers from tens of mW to tens of watts. Typical applications are missile warning, Earth and climate sciences, astronomy and cryogenic propellant management. Northrop Grumman Aerospace Systems (NGAS) has delivered many of the US flight cooler systems and has 12 long life pulse tube and Stirling coolers on orbit with two having over 11 years of continuous operation. This paper will provide an overview of the NGAS cryocooler capabilities.

  13. NASA aerospace pyrotechnically actuated systems: Program plan

    NASA Technical Reports Server (NTRS)

    Schulze, Norman R.

    1992-01-01

    The NASA Aerospace Pyrotechnically Actuated Systems (PAS) Program, a focused technology program, is being initiated to enhance the reliability, safety, and performance of pyrotechnically actuated systems. In broad terms, this Program Plan presents the approach that helps to resolve concerns raised by the NASA/DOD/DOE Aerospace Pyrotechnic Steering Committee. This Plan reflects key efforts needed in PAS technology. The resources committed to implement the Program will be identified in the Program Implementation Plan (PIP). A top level schedule is included along with major Program milestones and products. Responsibilities are defined in the PIP. The Plan identifies the goals and detailed objectives which define how those goals are to be accomplished. The Program will improve NASA's capabilities to design, develop, manufacture, and test pyrotechnically actuated systems for NASA's programs. Program benefits include the following: advanced pyrotechnic systems technology developed for NASA programs; hands-on pyrotechnic systems expertise; quick response capability to investigate and resolve pyrotechnic problems; enhanced communications and intercenter support among the technical staff; and government-industry PAS technical interchange. The PAS Program produces useful products that are of a broad-based technology nature rather than activities intended to meet specific technology objectives for individual programs. Serious problems have occurred with pyrotechnic devices although near perfect performance is demanded by users. The lack of a program to address those problems in the past is considered a serious omission. The nature of problems experienced as revealed by a survey are discussed and the origin of the program is explained.

  14. Artificial Immune System Approaches for Aerospace Applications

    NASA Technical Reports Server (NTRS)

    KrishnaKumar, Kalmanje; Koga, Dennis (Technical Monitor)

    2002-01-01

    Artificial Immune Systems (AIS) combine a priori knowledge with the adapting capabilities of biological immune system to provide a powerful alternative to currently available techniques for pattern recognition, modeling, design, and control. Immunology is the science of built-in defense mechanisms that are present in all living beings to protect against external attacks. A biological immune system can be thought of as a robust, adaptive system that is capable of dealing with an enormous variety of disturbances and uncertainties. Biological immune systems use a finite number of discrete "building blocks" to achieve this adaptiveness. These building blocks can be thought of as pieces of a puzzle which must be put together in a specific way-to neutralize, remove, or destroy each unique disturbance the system encounters. In this paper, we outline AIS models that are immediately applicable to aerospace problems and identify application areas that need further investigation.

  15. Variant terminology. [for aerospace information systems

    NASA Technical Reports Server (NTRS)

    Buchan, Ronald L.

    1991-01-01

    A system called Variant Terminology Switching (VTS) is set forth that is intended to provide computer-assisted spellings for terms that have American and British versions. VTS is based on the use of brackets, parentheses, and other symbols in conjunction with letters that distinguish American and British spellings. The symbols are used in the systems as indicators of actions such as deleting, adding, and replacing letters as well as replacing entire words and concepts. The system is shown to be useful for the intended purpose and also for the recognition of misspellings and for the standardization of computerized input/output. The VTS system is of interest to the development of international retrieval systems for aerospace and other technical databases that enhance the use by the global scientific community.

  16. Critical Systems Engineering Accelerator: Aerospace Demonstrator

    NASA Astrophysics Data System (ADS)

    Moreno, Ricardo; Fernandez, Gonzalo; Regada, Raul; Basanta, Luis; Alana, Elena; del Carmen Lomba, Maria

    2014-08-01

    Nowadays, the complexity and functionality of space systems is increasing more and more. Safety critical systems have to guarantee strong safety and dependability constraints. This paper presents CRYSTAL (Critical sYSTem engineering AcceLeration), a cross-domain ARTEMIS project for increasing the efficiency of the embedded software development in the industry through the definition of an integrated tool chain. CRYSTAL involves four major application domains: Aerospace, Automotive, Rail and Medical Healthcare. The impact in the Space Domain will be evaluated through a demonstrator implemented using CRYSTAL framework: the Low Level Software for an Avionics Control Unit, capable to run Application SW for autonomous navigation, image acquisition control, data compression and/or data handling. Finally, the results achieved will be evaluated taking into account the ECSS (European Committee for Space Standardization) standards and procedures.

  17. Potential teleoperator applications in manned aerospace systems

    NASA Technical Reports Server (NTRS)

    Johnsen, E. G.

    1973-01-01

    The trend of teleoperator development is toward digital computer controlled systems which utilize local sensor-computer-actuator loops to avoid obstacles and to sense manipulator grip-and-slip. The potential applications of advanced teleoperator technology to manned aerospace systems include long manipulator booms to be mounted on the shuttle. These can transfer cargo from the space shuttle and can acquire and retrieve objects in space. Free-flying teleoperators capable of acquiring, inspecting, repairing or refurbishing satellites in orbit are another space application. Another potential application of teleoperator technology is the concept of using an anthropomorphous teleoperator in lieu of man to control aircraft or spacecraft normally controlled by a human pilot.

  18. Computational Control of Flexible Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Sharpe, Lonnie, Jr.; Shen, Ji Yao

    1994-01-01

    The main objective of this project is to establish a distributed parameter modeling technique for structural analysis, parameter estimation, vibration suppression and control synthesis of large flexible aerospace structures. This report concentrates on the research outputs produced in the last two years of the project. The main accomplishments can be summarized as follows. A new version of the PDEMOD Code had been completed. A theoretical investigation of the NASA MSFC two-dimensional ground-based manipulator facility by using distributed parameter modelling technique has been conducted. A new mathematical treatment for dynamic analysis and control of large flexible manipulator systems has been conceived, which may provide a embryonic form of a more sophisticated mathematical model for future modified versions of the PDEMOD Codes.

  19. Computational control of flexible aerospace systems

    NASA Technical Reports Server (NTRS)

    Sharpe, Lonnie, Jr.; Shen, Ji Yao

    1994-01-01

    The main objective of this project is to establish a distributed parameter modeling technique for structural analysis, parameter estimation, vibration suppression and control synthesis of large flexible aerospace structures. This report concentrates on the research outputs produced in the last two years. The main accomplishments can be summarized as follows. A new version of the PDEMOD Code had been completed based on several incomplete versions. The verification of the code had been conducted by comparing the results with those examples for which the exact theoretical solutions can be obtained. The theoretical background of the package and the verification examples has been reported in a technical paper submitted to the Joint Applied Mechanics & Material Conference, ASME. A brief USER'S MANUAL had been compiled, which includes three parts: (1) Input data preparation; (2) Explanation of the Subroutines; and (3) Specification of control variables. Meanwhile, a theoretical investigation of the NASA MSFC two-dimensional ground-based manipulator facility by using distributed parameter modeling technique has been conducted. A new mathematical treatment for dynamic analysis and control of large flexible manipulator systems has been conceived, which may provide an embryonic form of a more sophisticated mathematical model for future modified versions of the PDEMOD Codes.

  20. Computational control of flexible aerospace systems

    NASA Astrophysics Data System (ADS)

    Sharpe, Lonnie, Jr.; Shen, Ji Yao

    1994-12-01

    The main objective of this project is to establish a distributed parameter modeling technique for structural analysis, parameter estimation, vibration suppression and control synthesis of large flexible aerospace structures. This report concentrates on the research outputs produced in the last two years. The main accomplishments can be summarized as follows. A new version of the PDEMOD Code had been completed based on several incomplete versions. The verification of the code had been conducted by comparing the results with those examples for which the exact theoretical solutions can be obtained. The theoretical background of the package and the verification examples has been reported in a technical paper submitted to the Joint Applied Mechanics & Material Conference, ASME. A brief USER'S MANUAL had been compiled, which includes three parts: (1) Input data preparation; (2) Explanation of the Subroutines; and (3) Specification of control variables. Meanwhile, a theoretical investigation of the NASA MSFC two-dimensional ground-based manipulator facility by using distributed parameter modeling technique has been conducted. A new mathematical treatment for dynamic analysis and control of large flexible manipulator systems has been conceived, which may provide an embryonic form of a more sophisticated mathematical model for future modified versions of the PDEMOD Codes.

  1. Risk communication strategy development using the aerospace systems engineering process

    NASA Technical Reports Server (NTRS)

    Dawson, S.; Sklar, M.

    2004-01-01

    This paper explains the goals and challenges of NASA's risk communication efforts and how the Aerospace Systems Engineering Process (ASEP) was used to map the risk communication strategy used at the Jet Propulsion Laboratory to achieve these goals.

  2. Structural health management of aerospace hotspots under fatigue loading

    NASA Astrophysics Data System (ADS)

    Soni, Sunilkumar

    Sustainability and life-cycle assessments of aerospace systems, such as aircraft structures and propulsion systems, represent growing challenges in engineering. Hence, there has been an increasing demand in using structural health monitoring (SHM) techniques for continuous monitoring of these systems in an effort to improve safety and reduce maintenance costs. The current research is part of an ongoing multidisciplinary effort to develop a robust SHM framework resulting in improved models for damage-state awareness and life prediction, and enhancing capability of future aircraft systems. Lug joints, a typical structural hotspot, were chosen as the test article for the current study. The thesis focuses on integrated SHM techniques for damage detection and characterization in lug joints. Piezoelectric wafer sensors (PZTs) are used to generate guided Lamb waves as they can be easily used for onboard applications. Sensor placement in certain regions of a structural component is not feasible due to the inaccessibility of the area to be monitored. Therefore, a virtual sensing concept is introduced to acquire sensor data from finite element (FE) models. A full three dimensional FE analysis of lug joints with piezoelectric transducers, accounting for piezoelectrical-mechanical coupling, was performed in Abaqus and the sensor signals were simulated. These modeled sensors are called virtual sensors. A combination of real data from PZTs and virtual sensing data from FE analysis is used to monitor and detect fatigue damage in aluminum lug joints. Experiments were conducted on lug joints under fatigue loads and sensor signals collected were used to validate the simulated sensor response. An optimal sensor placement methodology for lug joints is developed based on a detection theory framework to maximize the detection rate and minimize the false alarm rate. The placement technique is such that the sensor features can be directly correlated to damage. The technique accounts for a

  3. Aerospace Medicine

    NASA Technical Reports Server (NTRS)

    Michaud, Vince

    2015-01-01

    NASA Aerospace Medicine overview - Aerospace Medicine is that specialty area of medicine concerned with the determination and maintenance of the health, safety, and performance of those who fly in the air or in space.

  4. Summary of NASA Aerospace Flight Battery Systems Program activities

    NASA Technical Reports Server (NTRS)

    Manzo, Michelle; Odonnell, Patricia

    1994-01-01

    A summary of NASA Aerospace Flight Battery Systems Program Activities is presented. The NASA Aerospace Flight Battery Systems Program represents a unified NASA wide effort with the overall objective of providing NASA with the policy and posture which will increase the safety, performance, and reliability of space power systems. The specific objectives of the program are to: enhance cell/battery safety and reliability; maintain current battery technology; increase fundamental understanding of primary and secondary cells; provide a means to bring forth advanced technology for flight use; assist flight programs in minimizing battery technology related flight risks; and ensure that safe, reliable batteries are available for NASA's future missions.

  5. Comparison and analysis of two modern methods in the structural health monitoring techniques in aerospace

    NASA Astrophysics Data System (ADS)

    Riahi, Mohammad; Ahmadi, Alireza

    2016-04-01

    Role of air transport in the development and expansion of world trade leading to economic growth of different countries is undeniable. Continuing the world's trade sustainability without expansion of aerospace is next to impossible. Based on enormous expenses for design, manufacturing and maintenance of different aerospace structures, correct and timely diagnosis of defects in those structures to provide for maximum safety has the highest importance. Amid all this, manufacturers of commercial and even military aircrafts are after production of less expensive, lighter, higher fuel economy and nonetheless, higher safety. As such, two events has prevailed in the aerospace industries: (1) Utilization of composites for the fuselage as well as other airplane parts, (2) using modern manufacturing methods. Arrival of two these points have created the need for upgrading of the present systems as well as innovating newer methods in diagnosing and detection of defects in aerospace structures. Despite applicability of nondestructive testing (NDT) methods in aerospace for decades, due to some limitations in the defect detection's certainty, particularly for composite material and complex geometries, shadow of doubt has fallen on maintaining complete confidence in using NDT. These days, two principal approach are ahead to tackle the above mentioned problems. First, approach for the short range is the creative and combinational mean to increase the reliability of NDT and for the long run, innovation of new methods on the basis of structural health monitoring (SHM) is in order. This has led to new philosophy in the maintenance area and in some instances; field of design has also been affected by it.

  6. An international aerospace information system: A cooperative opportunity

    NASA Technical Reports Server (NTRS)

    Cotter, Gladys A.; Blados, Walter R.

    1992-01-01

    Scientific and technical information (STI) is a valuable resource which represents the results of large investments in research and development (R&D), and the expertise of a nation. NASA and its predecessor organizations have developed and managed the preeminent aerospace information system. We see information and information systems changing and becoming more international in scope. In Europe, consistent with joint R&D programs and a view toward a united Europe, we have seen the emergence of a European Aerospace Database concept. In addition, the development of aeronautics and astronautics in individual nations have also lead to initiatives for national aerospace databases. Considering recent technological developments in information science and technology, as well as the reality of scarce resources in all nations, it is time to reconsider the mutually beneficial possibilities offered by cooperation and international resource sharing. The new possibilities offered through cooperation among the various aerospace database efforts toward an international aerospace database initiative which can optimize the cost/benefit equation for all participants are considered.

  7. Nondeterministic Approaches and Their Potential for Future Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Noor, Ahmed K. (Compiler)

    2001-01-01

    This document contains the proceedings of the Training Workshop on Nondeterministic Approaches and Their Potential for Future Aerospace Systems held at NASA Langley Research Center, Hampton, Virginia, May 30-3 1, 2001. The workshop was jointly sponsored by Old Dominion University's Center for Advanced Engineering Environments and NASA. Workshop attendees were from NASA, other government agencies, industry, and universities. The objectives of the workshop were to give overviews of the diverse activities in nondeterministic approaches, uncertainty management methodologies, reliability assessment and risk management techniques, and to identify their potential for future aerospace systems.

  8. High temperature metal matrix composites for future aerospace systems

    NASA Technical Reports Server (NTRS)

    Stephens, Joseph R.

    1988-01-01

    Research was conducted on metal matrix composites and intermetallic matrix composites to understand their behavior under anticipated future operating conditions envisioned for aerospace power and propulsion systems of the 21st century. Extremes in environmental conditions, high temperature, long operating lives, and cyclic conditions dictate that the test evaluations not only include laboratory testing, but simulated flight conditions. The various processing techniques employed to fabricate composites are discussed along with the basic research underway to understand the behavior of high temperature composites, and the relationship of this research to future aerospace systems.

  9. High temperature metal matrix composites for future aerospace systems

    NASA Technical Reports Server (NTRS)

    Stephens, Joseph R.

    1987-01-01

    Research was conducted on metal matrix composites and intermetallic matrix composites to understand their behavior under anticipated future operating conditions envisioned for aerospace power and propulsion systems of the 21st century. Extremes in environmental conditions, high temperature, long operating lives, and cyclic conditions dictate that the test evaluations not only include laboratory testing, but simulated flight conditions. The various processing techniques employed to fabricate composites are discussed along with the basic research underway to understand the behavior of high temperature composites, and the relationship of this research to future aerospace systems.

  10. A Hazardous Gas Detection System for Aerospace and Commercial Applications

    NASA Technical Reports Server (NTRS)

    Hunter, G. W.; Neudeck, P. G.; Chen, L. - Y.; Makel, D. B.; Liu, C. C.; Wu, Q. H.; Knight, D.

    1998-01-01

    The detection of explosive conditions in aerospace propulsion applications is important for safety and economic reasons. Microfabricated hydrogen, oxygen, and hydrocarbon sensors as well as the accompanying hardware and software are being developed for a range of aerospace safety applications. The development of these sensors is being done using MEMS (Micro ElectroMechanical Systems) based technology and SiC-based semiconductor technology. The hardware and software allows control and interrogation of each sensor head and reduces accompanying cabling through multiplexing. These systems are being applied on the X-33 and on an upcoming STS-95 Shuttle mission. A number of commercial applications are also being pursued. It is concluded that this MEMS-based technology has significant potential to reduce costs and increase safety in a variety of aerospace applications.

  11. A Hazardous Gas Detection System for Aerospace and Commercial Applications

    NASA Technical Reports Server (NTRS)

    Hunter, G. W.; Neudeck, P. G.; Chen, L.-Y.; Makel, D. B.; Liu, C. C.; Wu, Q. H.; Knight, D.

    1998-01-01

    The detection of explosive conditions in aerospace propulsion applications is important for safety and economic reasons. Microfabricated hydrogen, oxygen, and hydrocarbon sensors as well as the accompanying hardware and software are being, developed for a range of aerospace safety applications. The development of these sensors is being done using MEMS (Micro ElectroMechanical Systems) based technology and SiC-based semiconductor technology. The hardware and software allows control and interrocation of each sensor head and reduces accompanying cabling through multiplexing. These systems are being, applied on the X-33 and on an upcoming STS-95 Shuttle mission. A number of commercial applications are also being pursued. It is concluded that this MEMS-based technology has significant potential to reduce costs and increase safety in a variety of aerospace applications.

  12. Research and Development of Rapid Design Systems for Aerospace Structure

    NASA Technical Reports Server (NTRS)

    Schaeffer, Harry G.

    1999-01-01

    This report describes the results of research activities associated with the development of rapid design systems for aerospace structures in support of the Intelligent Synthesis Environment (ISE). The specific subsystems investigated were the interface between model assembly and analysis; and, the high performance NASA GPS equation solver software system in the Windows NT environment on low cost high-performance PCs.

  13. Active sensors for health monitoring of aging aerospace structures

    SciTech Connect

    GIURGIUTIU,VICTOR; REDMOND,JAMES M.; ROACH,DENNIS P.; RACKOW,KIRK A.

    2000-03-08

    A project to develop non-intrusive active sensors that can be applied on existing aging aerospace structures for monitoring the onset and progress of structural damage (fatigue cracks and corrosion) is presented. The state of the art in active sensors structural health monitoring and damage detection is reviewed. Methods based on (a) elastic wave propagation and (b) electro-mechanical (NM) impedance technique are sighted and briefly discussed. The instrumentation of these specimens with piezoelectric active sensors is illustrated. The main detection strategies (E/M impedance for local area detection and wave propagation for wide area interrogation) are discussed. The signal processing and damage interpretation algorithms are tuned to the specific structural interrogation method used. In the high-frequency EIM impedance approach, pattern recognition methods are used to compare impedance signatures taken at various time intervals and to identify damage presence and progression from the change in these signatures. In the wave propagation approach, the acoustic-ultrasonic methods identifying additional reflection generated from the damage site and changes in transmission velocity and phase are used. Both approaches benefit from the use of artificial intelligence neural networks algorithms that can extract damage features based on a learning process. Design and fabrication of a set of structural specimens representative of aging aerospace structures is presented. Three built-up specimens, (pristine, with cracks, and with corrosion damage) are used. The specimen instrumentation with active sensors fabricated at the University of South Carolina is illustrated. Preliminary results obtained with the E/M impedance method on pristine and cracked specimens are presented.

  14. Active sensors for health monitoring of aging aerospace structures

    SciTech Connect

    GIURGIUTIU,VICTOR; REDMOND,JAMES M.; ROACH,DENNIS P.; RACKOW,KIRK A.

    2000-02-29

    A project to develop non-intrusive active sensors that can be applied on existing aging aerospace structures for monitoring the onset and progress of structural damage (fatigue cracks and corrosion) is presented. The state of the art in active sensors structural health monitoring and damage detection is reviewed. Methods based on (a) elastic wave propagation and (b) electro-mechanical (E/M) impedance technique are cited and briefly discussed. The instrumentation of these specimens with piezoelectric active sensors is illustrated. The main detection strategies (E/M impedance for local area detection and wave propagation for wide area interrogation) are discussed. The signal processing and damage interpretation algorithms are tuned to the specific structural interrogation method used. In the high-frequency E/M impedance approach, pattern recognition methods are used to compare impedance signatures taken at various time intervals and to identify damage presence and progression from the change in these signatures. In the wave propagation approach, the acousto-ultrasonic methods identifying additional reflection generated from the damage site and changes in transmission velocity and phase are used. Both approaches benefit from the use of artificial intelligence neural networks algorithms that can extract damage features based on a learning process. Design and fabrication of a set of structural specimens representative of aging aerospace structures is presented. Three built-up specimens (pristine, with cracks, and with corrosion damage) are used. The specimen instrumentation with active sensors fabricated at the University of South Carolina is illustrated. Preliminary results obtained with the E/M impedance method on pristine and cracked specimens are presented.

  15. Feasibility of Retraining Displaced Aerospace Personnel Into the Allied and Public Health Occupations: Final Report.

    ERIC Educational Resources Information Center

    Lindenberg, Klaus W.

    The final report of a study to determine the feasibility of retraining displaced aerospace personnel in the Cape Kennedy, Florida, area is presented. Three broad areas were examined: (1) the development of a profile analysis of aerospace and defense related displaced personnel; (2) compilation of health manpower employment opportunity data; (3)…

  16. Aerospace System Unified Life Cycle Engineering Producibility Measurement Issues

    DTIC Science & Technology

    1989-05-01

    system to a heterogeneous environment with exterior large independent programs, such a Finite Element Model (FEM) or a Computational Fluid Dynamics ...presents a plan for the develop- ment of a design environment of an aerospace design synthesis model with a producibility module. Included is a description...and Tools .......................................... ES-6 E. Producibility Synthesis Model Development Plan .............................. ES-7 1. Life

  17. Propulsion Systems for Aircraft. Aerospace Education II. Instructional Unit II.

    ERIC Educational Resources Information Center

    Elmer, James D.

    This curriculum guide accompanies another publication in the Aerospace Education II series entitled "Propulsion Systems for Aircraft." The guide includes specific guidelines for teachers on each chapter in the textbook. Suggestions are included for objectives (traditional and behavioral), suggested outline, orientation, suggested key…

  18. Hybrid Control Systems: Design and Analysis for Aerospace Applications

    DTIC Science & Technology

    2009-02-28

    COVERED (From - To) 15-02-2006 - 30-11-200! 4. TITLE AND SUBTITLE Hybrid control systems : Design and analysis for aerospace applications 5a...of this research was to contribute to the fundamental understanding of hybrid control systems and to explore the use of hybrid feedback in problems...of interest to the Air Force. We aimed to provide a solid, foundational understanding of hybrid systems that will enable the vast potential of hybrid

  19. Verification and Validation of Neural Networks for Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Mackall, Dale; Nelson, Stacy; Schumann, Johann

    2002-01-01

    The Dryden Flight Research Center V&V working group and NASA Ames Research Center Automated Software Engineering (ASE) group collaborated to prepare this report. The purpose is to describe V&V processes and methods for certification of neural networks for aerospace applications, particularly adaptive flight control systems like Intelligent Flight Control Systems (IFCS) that use neural networks. This report is divided into the following two sections: Overview of Adaptive Systems and V&V Processes/Methods.

  20. Verification and Validation of Neural Networks for Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Mackall, Dale; Nelson, Stacy; Schumman, Johann; Clancy, Daniel (Technical Monitor)

    2002-01-01

    The Dryden Flight Research Center V&V working group and NASA Ames Research Center Automated Software Engineering (ASE) group collaborated to prepare this report. The purpose is to describe V&V processes and methods for certification of neural networks for aerospace applications, particularly adaptive flight control systems like Intelligent Flight Control Systems (IFCS) that use neural networks. This report is divided into the following two sections: 1) Overview of Adaptive Systems; and 2) V&V Processes/Methods.

  1. Aerospace Sensor Systems: From Sensor Development To Vehicle Application

    NASA Technical Reports Server (NTRS)

    Hunter, Gary W.

    2008-01-01

    This paper presents an overview of years of sensor system development and application for aerospace systems. The emphasis of this work is on developing advanced capabilities for measurement and control of aeropropulsion and crew vehicle systems as well as monitoring the safety of those systems. Specific areas of work include chemical species sensors, thin film thermocouples and strain gages, heat flux gages, fuel gages, SiC based electronic devices and sensors, space qualified electronics, and MicroElectroMechanical Systems (MEMS) as well as integrated and multifunctional sensor systems. Each sensor type has its own technical challenges related to integration and reliability in a given application. The general approach has been to develop base sensor technology using microfabrication techniques, integrate sensors with "smart" hardware and software, and demonstrate those systems in a range of aerospace applications. Descriptions of the sensor elements, their integration into sensors systems, and examples of sensor system applications will be discussed. Finally, suggestions related to the future of sensor technology will be given. It is concluded that smart micro/nano sensor technology can revolutionize aerospace applications, but significant challenges exist in maturing the technology and demonstrating its value in real-life applications.

  2. Development and Evaluation of Sensor Concepts for Ageless Aerospace Vehicles: Report 6 - Development and Demonstration of a Self-Organizing Diagnostic System for Structural Health Monitoring

    NASA Technical Reports Server (NTRS)

    Batten, Adam; Edwards, Graeme; Gerasimov, Vadim; Hoschke, Nigel; Isaacs, Peter; Lewis, Chris; Moore, Richard; Oppolzer, Florien; Price, Don; Prokopenko, Mikhail; Scott, Andrew; Wang, Peter

    2010-01-01

    This report describes a significant advance in the capability of the CSIRO/NASA structural health monitoring Concept Demonstrator (CD). The main thrust of the work has been the development of a mobile robotic agent, and the hardware and software modifications and developments required to enable the demonstrator to operate as a single, self-organizing, multi-agent system. This single-robot system is seen as the forerunner of a system in which larger numbers of small robots perform inspection and repair tasks cooperatively, by self-organization. While the goal of demonstrating self-organized damage diagnosis was not fully achieved in the time available, much of the work required for the final element that enables the robot to point the video camera and transmit an image has been completed. A demonstration video of the CD and robotic systems operating will be made and forwarded to NASA.

  3. Extended GTST-MLD for aerospace system safety analysis.

    PubMed

    Guo, Chiming; Gong, Shiyu; Tan, Lin; Guo, Bo

    2012-06-01

    The hazards caused by complex interactions in the aerospace system have become a problem that urgently needs to be settled. This article introduces a method for aerospace system hazard interaction identification based on extended GTST-MLD (goal tree-success tree-master logic diagram) during the design stage. GTST-MLD is a functional modeling framework with a simple architecture. Ontology is used to extend the ability of system interaction description in GTST-MLD by adding the system design knowledge and the past accident experience. From the level of functionality and equipment, respectively, this approach can help the technician detect potential hazard interactions. Finally, a case is used to show the method.

  4. Recent GRC Aerospace Technologies Applicable to Terrestrial Energy Systems

    NASA Technical Reports Server (NTRS)

    Kankam, David; Lyons, Valerie J.; Hoberecht, Mark A.; Tacina, Robert R.; Hepp, Aloysius F.

    2000-01-01

    This paper is an overview of a wide range of recent aerospace technologies under development at the NASA Glenn Research Center, in collaboration with other NASA centers, government agencies, industry and academia. The focused areas are space solar power, advanced power management and distribution systems, Stirling cycle conversion systems, fuel cells, advanced thin film photovoltaics and batteries, and combustion technologies. The aerospace-related objectives of the technologies are generation of space power, development of cost-effective and reliable, high performance power systems, cryogenic applications, energy storage, and reduction in gas-turbine emissions, with attendant clean jet engines. The terrestrial energy applications of the technologies include augmentation of bulk power in ground power distribution systems, and generation of residential, commercial and remote power, as well as promotion of pollution-free environment via reduction in combustion emissions.

  5. Marshall system for aerospace system simulation (MARSYAS), user's manual

    NASA Technical Reports Server (NTRS)

    Ventre, A.; Sevigny, R.; Mccollum, W.; Balentine, T.

    1973-01-01

    The capabilities of the Marshall system for aerospace system simulation (MARSYAS) and how to use it are described. MARSYAS is a software system that allows easy setup and control of the simulation of the dynamics of large physical systems on a digital computer. The physical systems are modeled in the form of block diagrams or equations. The blocks can have multiple inputs and multiple outputs, and they can be nested to form hierarchies. The block diagrams can contain transfer functions, nonlinear and logical functions, equations, analog computer elements and FORTRAN programs. The input format of the equations can be combinations of nonlinear, time-varying differential equations and algebraic equations in their original format. MARSYAS could also serve as a storage and retrieval system for models as a basis for a model configuration control system on a central time-shared computer. The outputs of the simulation system can be not only time-responses but also other analysis data such as frequency response, power spectrum and stability parameters. The MARSYAS translator is written in FORTRAN running on the Univac 1108 computer under the EXEC 8 operating system.

  6. Flexibility in system design and implications for aerospace systems.

    PubMed

    Saleh, Joseph H; Hastings, Daniel E; Newman, Dava J

    2003-12-01

    The purpose of this paper is to review the concept of flexibility as discussed in various fields of investigations, to extract its characteristic features, and to explore its implications in the case of aerospace system design. In order to discuss any subject matter clearly, it is necessary to begin with a clear set of definitions. Indeed much can be gained through careful and consistent definitions of terms alone. Flexibility however is a word rich with ambiguity. While it is being increasingly used in various fields, few attempts have been made to formally define, quantify, and propose ways for achieving flexibility. This paper proposes to fill in part of this gap by synthesizing a clear and consistent definition of flexibility. It will do so by reviewing the usage of the term in various fields of inquiries, and show that it is indeed possible to clearly and unambiguously characterize flexibility, and to disentangle it from closely related concepts.

  7. The aerospace energy systems laboratory: Hardware and software implementation

    NASA Technical Reports Server (NTRS)

    Glover, Richard D.; Oneil-Rood, Nora

    1989-01-01

    For many years NASA Ames Research Center, Dryden Flight Research Facility has employed automation in the servicing of flight critical aircraft batteries. Recently a major upgrade to Dryden's computerized Battery Systems Laboratory was initiated to incorporate distributed processing and a centralized database. The new facility, called the Aerospace Energy Systems Laboratory (AESL), is being mechanized with iAPX86 and iAPX286 hardware running iRMX86. The hardware configuration and software structure for the AESL are described.

  8. The 2nd NASA Aerospace Pyrotechnic Systems Workshop

    NASA Technical Reports Server (NTRS)

    St.Cyr, William W. (Compiler)

    1994-01-01

    This NASA Conference Publication contains the proceedings of the Second NASA Aerospace Pyrotechnics Systems Workshop held at Sandia National Laboratories, Albuquerque, New Mexico, February 8-9, 1994. The papers are grouped by sessions: (1) Session 1 - Laser Initiation and Laser Systems; (2) Session 2 - Electric Initiation; (3) Session 3 - Mechanisms & Explosively Actuated Devices; (4) Session 4 - Analytical Methods and Studies; and (5) Session 5 - Miscellaneous. A sixth session, a panel discussion and open forum, concluded the workshop.

  9. Textile mechanical elements in aerospace vehicle parachute systems

    NASA Technical Reports Server (NTRS)

    Lindgren, M. J.; French, K. E.

    1972-01-01

    Materials, design considerations, and design details for textile mechanical elements used in aerospace vehicle parachute systems are briefly reviewed. Friction burns are noted as a major cause of parachute system failures. The friction burn hazard can be minimized by designing for predeployment and deployment sequence control with textile mechanical restraints. Two basic restraint designs (restraint loops and line ties) are discussed and various applications of the designs shown.

  10. Visualization in aerospace research with a large wall display system

    NASA Astrophysics Data System (ADS)

    Matsuo, Yuichi

    2002-05-01

    National Aerospace Laboratory of Japan has built a large- scale visualization system with a large wall-type display. The system has been operational since April 2001 and comprises a 4.6x1.5-meter (15x5-foot) rear projection screen with 3 BARCO 812 high-resolution CRT projectors. The reason we adopted the 3-gun CRT projectors is support for stereoscopic viewing, ease with color/luminosity matching and accuracy of edge-blending. The system is driven by a new SGI Onyx 3400 server of distributed shared-memory architecture with 32 CPUs, 64Gbytes memory, 1.5TBytes FC RAID disk and 6 IR3 graphics pipelines. Software is another important issue for us to make full use of the system. We have introduced some applications available in a multi- projector environment such as AVS/MPE, EnSight Gold and COVISE, and been developing some software tools that create volumetric images with using SGI graphics libraries. The system is mainly used for visualization fo computational fluid dynamics (CFD) simulation sin aerospace research. Visualized CFD results are of our help for designing an improved configuration of aerospace vehicles and analyzing their aerodynamic performances. These days we also use it for various collaborations among researchers.

  11. Intelligent Systems for Aerospace Engineering: An Overview

    NASA Technical Reports Server (NTRS)

    Krishnakumar, Kalmanje; Clancey, Daniel (Technical Monitor)

    2002-01-01

    Intelligent systems are nature-inspired, mathematically sound, computationally intensive problem solving tools and methodologies that have become extremely important for advancing the current trends in information technology. Artificially intelligent systems currently utilize computers to emulate various faculties of human intelligence and biological metaphors. They use a combination of symbolic and sub-symbolic systems capable of evolving human cognitive skills and intelligence, not just systems capable of doing things humans do not do well. Intelligent systems are ideally suited for tasks such as search and optimization, pattern recognition and matching, planning, uncertainty management, control, and adaptation. In this paper, the intelligent system technologies and their application potential are highlighted via several examples.

  12. Intelligent Systems For Aerospace Engineering: An Overview

    NASA Technical Reports Server (NTRS)

    KrishnaKumar, K.

    2003-01-01

    Intelligent systems are nature-inspired, mathematically sound, computationally intensive problem solving tools and methodologies that have become extremely important for advancing the current trends in information technology. Artificially intelligent systems currently utilize computers to emulate various faculties of human intelligence and biological metaphors. They use a combination of symbolic and sub-symbolic systems capable of evolving human cognitive skills and intelligence, not just systems capable of doing things humans do not do well. Intelligent systems are ideally suited for tasks such as search and optimization, pattern recognition and matching, planning, uncertainty management, control, and adaptation. In this paper, the intelligent system technologies and their application potential are highlighted via several examples.

  13. Impact of knowledge-based software engineering on aerospace systems

    NASA Technical Reports Server (NTRS)

    Peyton, Liem; Gersh, Mark A.; Swietek, Gregg

    1991-01-01

    The emergence of knowledge engineering as a software technology will dramatically alter the use of software by expanding application areas across a wide spectrum of industries. The engineering and management of large aerospace software systems could benefit from a knowledge engineering approach. An understanding of this technology can potentially make significant improvements to the current practice of software engineering, and provide new insights into future development and support practices.

  14. An operating system for future aerospace vehicle computer systems

    NASA Technical Reports Server (NTRS)

    Foudriat, E. C.; Berman, W. J.; Will, R. W.; Bynum, W. L.

    1984-01-01

    The requirements for future aerospace vehicle computer operating systems are examined in this paper. The computer architecture is assumed to be distributed with a local area network connecting the nodes. Each node is assumed to provide a specific functionality. The network provides for communication so that the overall tasks of the vehicle are accomplished. The O/S structure is based upon the concept of objects. The mechanisms for integrating node unique objects with node common objects in order to implement both the autonomy and the cooperation between nodes is developed. The requirements for time critical performance and reliability and recovery are discussed. Time critical performance impacts all parts of the distributed operating system; e.g., its structure, the functional design of its objects, the language structure, etc. Throughout the paper the tradeoffs - concurrency, language structure, object recovery, binding, file structure, communication protocol, programmer freedom, etc. - are considered to arrive at a feasible, maximum performance design. Reliability of the network system is considered. A parallel multipath bus structure is proposed for the control of delivery time for time critical messages. The architecture also supports immediate recovery for the time critical message system after a communication failure.

  15. Elements of a collaborative systems model within the aerospace industry

    NASA Astrophysics Data System (ADS)

    Westphalen, Bailee R.

    2000-10-01

    Scope and method of study. The purpose of this study was to determine the components of current aerospace collaborative efforts. There were 44 participants from two selected groups surveyed for this study. Nineteen were from the Oklahoma Air National Guard based in Oklahoma City representing the aviation group. Twenty-five participants were from the NASA Johnson Space Center in Houston representing the aerospace group. The surveys for the aviation group were completed in reference to planning missions necessary to their operations. The surveys for the aerospace group were completed in reference to a well-defined and focused goal from a current mission. A questionnaire was developed to survey active participants of collaborative systems in order to consider various components found within the literature. Results were analyzed and aggregated through a database along with content analysis of open-ended question comments from respondents. Findings and conclusions. This study found and determined elements of a collaborative systems model in the aerospace industry. The elements were (1) purpose or mission for the group or team; (2) commitment or dedication to the challenge; (3) group or team meetings and discussions; (4) constraints of deadlines and budgets; (5) tools and resources for project and simulations; (6) significant contributors to the collaboration; (7) decision-making formats; (8) reviews of project; (9) participants education and employment longevity; (10) cross functionality of team or group members; (11) training on the job plus teambuilding; (12) other key elements identified relevant by the respondents but not included in the model such as communication and teamwork; (13) individual and group accountability; (14) conflict, learning, and performance; along with (15) intraorganizational coordination. These elements supported and allowed multiple individuals working together to solve a common problem or to develop innovation that could not have been

  16. NASA Aerospace Flight Battery Systems Program: An Update

    NASA Technical Reports Server (NTRS)

    Manzo, Michelle A.

    1992-01-01

    The major objective of the NASA Aerospace Flight Battery Systems Program is to provide NASA with the policy and posture to increase and ensure the safety, performance, and reliability of batteries for space power systems. The program was initiated in 1985 to address battery problems experienced by NASA and other space battery users over the previous ten years. The original program plan was approved in May 1986 and modified in 1990 to reflect changes in the agency's approach to battery related problems that are affecting flight programs. The NASA Battery Workshop is supported by the NASA Aerospace Flight Battery Systems Program. The main objective of the discussions is to aid in defining the direction which the agency should head with respect to aerospace battery issues. Presently, primary attention in the Battery Program is being devoted to issues revolving around the future availability of nickel-cadmium batteries as a result of the proposed OSHA standards with respect to allowable cadmium levels in the workplace. The decision of whether or not to pursue the development of an advanced nickel-cadmium cell design and the qualification of vendors to produce cells for flight programs hinges on the impact of the OSHA ruling. As part of a unified Battery Program, the evaluation of a nickel-hydrogen cell design options and primary cell issues are also being pursued to provide high performance NASA Standards and space qualified state-of-the-art cells. The resolution of issues is being addressed with the full participation of the aerospace battery community.

  17. Advanced aerospace hydraulic systems and components

    NASA Astrophysics Data System (ADS)

    1991-07-01

    The present volume discusses the development of a viable hydraulic circuit breaker, the electromodulated control of supply pressure in hydraulic systems, the flight control actuation system for the B-2 advanced technology bomber, and the B747-400 upper rudder control system with triple tandem valve. Also discussed are a total-flexibility cartridge-valve porting via innovative sealing technology, the A320 pilots' autothrust survey, an all-digital electrohydrostatic servoactuator, and a concurrent design/analysis tool for aircraft hydraulic systems. (For individual items see A93-21841 to A93-21844)

  18. Comprehensive Design Reliability Activities for Aerospace Propulsion Systems

    NASA Technical Reports Server (NTRS)

    Christenson, R. L.; Whitley, M. R.; Knight, K. C.

    2000-01-01

    This technical publication describes the methodology, model, software tool, input data, and analysis result that support aerospace design reliability studies. The focus of these activities is on propulsion systems mechanical design reliability. The goal of these activities is to support design from a reliability perspective. Paralleling performance analyses in schedule and method, this requires the proper use of metrics in a validated reliability model useful for design, sensitivity, and trade studies. Design reliability analysis in this view is one of several critical design functions. A design reliability method is detailed and two example analyses are provided-one qualitative and the other quantitative. The use of aerospace and commercial data sources for quantification is discussed and sources listed. A tool that was developed to support both types of analyses is presented. Finally, special topics discussed include the development of design criteria, issues of reliability quantification, quality control, and reliability verification.

  19. The pultrusion process for structures on advanced aerospace transportation systems

    NASA Technical Reports Server (NTRS)

    Wilson, Maywood L.; Macconochie, Ian O.; Johnson, Gary S.

    1986-01-01

    The pultrusion process, which has the potential for use in the manufacture of structures for aerospace hardware, is described. In this process, reinforcing fibers are pulled continuously through a resin system for wetting and subsequently through a heated die for polymerization. By using this process, fabrication of very long lengths of high strength, lightweight structures with consistently high quality for aerospace applications is possible. The more conventional processes involve hand lay-up, vacuum bagging, autoclaving or oven curing techniques such that lengths of structural elements produced are limited by the lengths of autoclaves or curing ovens. Several types of developmental structural elements are described in which fiberglass, aramid, graphite, and hybrid fiber systems have been used as reinforcements in an epoxy matrix and their flexural properties compared. Reinforcement fibers having tailor-made orientations which achieve tailor-made strength in the pultrusions are described. The potential aerospace applications for the pultruded products are described with advantages cited over conventional hand lay-up methods.

  20. Challenging Aerospace Problems for Intelligent Systems

    NASA Technical Reports Server (NTRS)

    Krishnakumar, Kalmanje; Kanashige, John; Satyadas, A.; Clancy, Daniel (Technical Monitor)

    2002-01-01

    In this paper we highlight four problem domains that are well suited and challenging for intelligent system technologies. The problems are defined and an outline of a probable approach is presented. No attempt is made to define the problems as test cases. In other words, no data or set of equations that a user can code and get results are provided. The main idea behind this paper is to motivate intelligent system researchers to examine problems that will elevate intelligent system technologies and applications to a higher level.

  1. The First NASA Aerospace Pyrotechnic Systems Workshop

    NASA Technical Reports Server (NTRS)

    St.cyr, William W. (Compiler)

    1993-01-01

    Papers from the conference proceedings are presented, and they are grouped by the following sessions: pyrotechnically actuated systems, laser initiation, and modeling and analysis. A fourth session, a panel discussion and open forum, concluded the workshop.

  2. Biomedical Application of Aerospace Personal Cooling Systems

    NASA Technical Reports Server (NTRS)

    Ku, Yu-Tsuan E.; Lee, Hank C.; Montgomery, Leslie D.; Webbon, Bruce W.; Kliss, Mark (Technical Monitor)

    1997-01-01

    Personal thermoregulatory systems which are used by astronauts to alleviate thermal stress during extravehicular activity have been applied to the therapeutic management of multiple sclerosis. However, little information is available regarding the physiologic and circulatory changes produced by routine operation of these systems. The objectives of this study were to compare the effectiveness of two passive and two active cooling vests and to measure the body temperature and circulatory changes produced by each cooling vest configuration. The MicroClimate Systems and the Life Enhancement Tech(LET) lightweight liquid cooling vests, the Steele Vest and LET's Zipper Front Garment were used to cool the chest region of 10 male and female subjects (25 to 55 yr.) in this study. Calf, forearm and finger blood flows were measured using a tetrapolar impedance rheograph. The subjects, seated in an upright position at normal room temperature (approx.22C), were tested for 60 min. with the cooling system operated at its maximum cooling capacity. Blood flows were recorded continuously using a computer data acquisition system with a sampling frequency of 250 Hz. Oral, right and left ear temperatures and cooling system parameters were logged manually every 5 min. Arm, leg, chest and rectal temperatures; heart rate; respiration; and an activity index were recorded continuously on a U.F.I., Inc. Biolog ambulatory monitor. In general, the male and female subjects' oral and ear temperature responses to cooling were similar for all vest configurations tested. Oral temperatures during the recovery period were significantly (P<0.05) lower than during the control period, approx. 0.2 - 0.5C, for both men and women wearing any of the four different garments. The corresponding ear temperatures were significantly (P<0.05) decreased approx.0.2 - 0.4C by the end of the recovery period. Compared to the control period, no significant differences were found in rectal temperatures during cooling and

  3. Intelligent hypertext systems for aerospace engineering applications

    NASA Technical Reports Server (NTRS)

    Lo, Ching F.

    1989-01-01

    This paper is a progress report on the utilization of AI technology for assisting users locating and understanding technical information in manuals used for planning and conducting wind tunnel test. The specific goal is to create an Intelligent Hypertext System (IHS) for wind tunnel testing which combines the computerized manual in the form of hypertext and an advisory system that stores experts' knowledge and experiences. A prototype IHS for conducting transonic wind tunnel testing has been constructed with limited knowledge base. The prototype is being evaluated by potential users.

  4. NASA aerospace battery system program initiation

    NASA Technical Reports Server (NTRS)

    Schulze, Norman R.

    1987-01-01

    Preflight and flight battery system problems in flight programs at NASA created high-level concern and interest in the current battery technology status. As a result, NASA conducted an in-house review of problems experienced both internally and by other government users. The derived issues which encompassed the programmatic scope from cell manufacturing to in-flight operations of the system are discussed. From the identified deficiencies, a modestly scaled battery program was established to alleviate or minimize the risks of future occurrences.

  5. Aerospace Engineering Systems and the Advanced Design Technologies Testbed Experience

    NASA Technical Reports Server (NTRS)

    VanDalsem, William R.; Livingston, Mary E.; Melton, John E.; Torres, Francisco J.; Stremel, Paul M.

    1999-01-01

    Continuous improvement of aerospace product development processes is a driving requirement across much of the aerospace community. As up to 90% of the cost of an aerospace product is committed during the first 10% of the development cycle, there is a strong emphasis on capturing, creating, and communicating better information (both requirements and performance) early in the product development process. The community has responded by pursuing the development of computer-based systems designed to enhance the decision-making capabilities of product development individuals and teams. Recently, the historical foci on sharing the geometrical representation and on configuration management are being augmented: 1) Physics-based analysis tools for filling the design space database; 2) Distributed computational resources to reduce response time and cost; 3) Web-based technologies to relieve machine-dependence; and 4) Artificial intelligence technologies to accelerate processes and reduce process variability. The Advanced Design Technologies Testbed (ADTT) activity at NASA Ames Research Center was initiated to study the strengths and weaknesses of the technologies supporting each of these trends, as well as the overall impact of the combination of these trends on a product development event. Lessons learned and recommendations for future activities are reported.

  6. UV-Curable Aerospace Paint Systems

    DTIC Science & Technology

    2008-02-28

    cure the coating test sample Surface Cure Spray of Primer HVLP Spray Gun Gravity Feed Test Panel Orientation In Spray Booth Final Sprayed Test...controls • Environmental regulations ban future use Alternative coatings that are available are deficient in: • Application method - cannot spray ...Of UV Cure Coating Fluid Robotic Spray System Spraying Test Stand Controller Contoured Mock-up Part Fluid Test Stand Robotic UV Curing Of

  7. Valuation of design adaptability in aerospace systems

    NASA Astrophysics Data System (ADS)

    Fernandez Martin, Ismael

    As more information is brought into early stages of the design, more pressure is put on engineers to produce a reliable, high quality, and financially sustainable product. Unfortunately, requirements established at the beginning of a new project by customers, and the environment that surrounds them, continue to change in some unpredictable ways. The risk of designing a system that may become obsolete during early stages of production is currently tackled by the use of robust design simulation, a method that allows to simultaneously explore a plethora of design alternatives and requirements with the intention of accounting for uncertain factors in the future. Whereas this design technique has proven to be quite an improvement in design methods, under certain conditions, it fails to account for the change of uncertainty over time and the intrinsic value embedded in the system when certain design features are activated. This thesis introduces the concepts of adaptability and real options to manage risk foreseen in the face of uncertainty at early design stages. The method described herein allows decision-makers to foresee the financial impact of their decisions at the design level, as well as the final exposure to risk. In this thesis, cash flow models, traditionally used to obtain the forecast of a project's value over the years, were replaced with surrogate models that are capable of showing fluctuations on value every few days. This allowed a better implementation of real options valuation, optimization, and strategy selection. Through the option analysis model, an optimization exercise allows the user to obtain the best implementation strategy in the face of uncertainty as well as the overall value of the design feature. Here implementation strategy refers to the decision to include a new design feature in the system, after the design has been finalized, but before the end of its production life. The ability to do this in a cost efficient manner after the system

  8. Micro/Nanoscale Chemicalsensor Systems for Aerospace Applications

    NASA Technical Reports Server (NTRS)

    Hunter, Gary; Xu, Jennifer; Evans, Laura; Biaggi-Labiosa, Azlin; Ward, Benjamin; Rowe, Scott; Makel, Darby; Liu, Chung Chiun; Dutta, Prabir; Berger, Gordon; VanderWal, Randy

    2010-01-01

    The aerospace industry requires development of a range of chemical-sensor technologies for applications including emissions monitoring as well as fuel-leak and fire detection. Improvements in sensing technology are necessary to increase safety, reduce emissions, and increase performance. The overall aim is to develop intelligent-vehicle systems that can autonomously monitor their state and respond to environmental changes. A range of chemical sensors is under development to meet these needs, based in part on microfabrication technology which produces sensors of minimal size, weight, and power consumption. We have fabricated a range of sensor platforms, integrated them with hardware to form complete sensor systems, and demonstrated their applicability.

  9. Advanced Aerospace Tribological Systems - Current Status and Future Technology Needs

    NASA Technical Reports Server (NTRS)

    Fusaro, Robert L.

    1993-01-01

    The state of the art of space and aeronautics tribology, the current and future technology problems, and perceived needs for future missions are discussed. Mechanisms of liquid and solid lubrication, and liquid- and solid-lubrication factors are examined. Such current and future tribological problem areas as aerospace plane, space simulation, and accelerated testing are addressed. Consideration is also given to the following novel lubrication technologies: inerted lubrication systems, mist lubrication, vapor deposition, catalytically gas-generated carbon, dense thin films of solid lubricants, powder lubrication, and gas and magnetic bearings. Recommendations for ensuring the success of current and future space and aeronautics missions are presented.

  10. Event Detection in Aerospace Systems using Centralized Sensor Networks: A Comparative Study of Several Methodologies

    NASA Technical Reports Server (NTRS)

    Mehr, Ali Farhang; Sauvageon, Julien; Agogino, Alice M.; Tumer, Irem Y.

    2006-01-01

    Recent advances in micro electromechanical systems technology, digital electronics, and wireless communications have enabled development of low-cost, low-power, multifunctional miniature smart sensors. These sensors can be deployed throughout a region in an aerospace vehicle to build a network for measurement, detection and surveillance applications. Event detection using such centralized sensor networks is often regarded as one of the most promising health management technologies in aerospace applications where timely detection of local anomalies has a great impact on the safety of the mission. In this paper, we propose to conduct a qualitative comparison of several local event detection algorithms for centralized redundant sensor networks. The algorithms are compared with respect to their ability to locate and evaluate an event in the presence of noise and sensor failures for various node geometries and densities.

  11. A Knowledge-Based System Developer for aerospace applications

    NASA Technical Reports Server (NTRS)

    Shi, George Z.; Wu, Kewei; Fensky, Connie S.; Lo, Ching F.

    1993-01-01

    A prototype Knowledge-Based System Developer (KBSD) has been developed for aerospace applications by utilizing artificial intelligence technology. The KBSD directly acquires knowledge from domain experts through a graphical interface then builds expert systems from that knowledge. This raises the state of the art of knowledge acquisition/expert system technology to a new level by lessening the need for skilled knowledge engineers. The feasibility, applicability , and efficiency of the proposed concept was established, making a continuation which would develop the prototype to a full-scale general-purpose knowledge-based system developer justifiable. The KBSD has great commercial potential. It will provide a marketable software shell which alleviates the need for knowledge engineers and increase productivity in the workplace. The KBSD will therefore make knowledge-based systems available to a large portion of industry.

  12. The Effect of Online Systems Analysis Training on Aerospace Industry Business Performance: A Qualitative Study

    ERIC Educational Resources Information Center

    Burk, Erlan

    2012-01-01

    Aerospace companies needed additional research on technology-based training to verify expectations when enhancing human capital through online systems analysis training. The research for online systems analysis training provided aerospace companies a means to verify expectations for systems analysis technology-based training on business…

  13. Aerospace Systems Design in NASA's Collaborative Engineering Environment

    NASA Astrophysics Data System (ADS)

    Monell, Donald W.; Piland, William M.

    2000-07-01

    Past designs of complex aerospace systems involved an environment consisting of collocated design teams with project managers, technical discipline experts, and other experts (e.g., manufacturing and systems operations). These experts were generally qualified only on the basis of past design experience and typically had access to a limited set of integrated analysis tools. These environments provided less than desirable design fidelity, often led to the inability of assessing critical programmatic and technical issues (e.g., cost, risk, technical impacts), and generally derived a design that was not necessarily optimized across the entire system. The continually changing, modern aerospace industry demands systems design processes that involve the best talent available (no matter where it resides) and access to the best design and analysis tools. A solution to these demands involves a design environment referred to as collaborative engineering. The collaborative engineering environment evolving within the National Aeronautics and Space Administration (NASA) is a capability that enables the Agency's engineering infrastructure to interact and use the best state-of-the-art tools and data across organizational boundaries. Using collaborative engineering, the collocated team is replaced with an interactive team structure where the team members are geographically distributed and the best engineering talent can be applied to the design effort regardless of physical location. In addition, a more efficient, higher quality design product is delivered by bringing together the best engineering talent with more up-to-date design and analysis tools. These tools are focused on interactive, multidisciplinary design and analysis with emphasis on the complete life cycle of the system, and they include nontraditional, integrated tools for life cycle cost estimation and risk assessment. NASA has made substantial progress during the last two years in developing a collaborative

  14. Aerospace Systems Design in NASA's Collaborative Engineering Environment

    NASA Technical Reports Server (NTRS)

    Monell, Donald W.; Piland, William M.

    2000-01-01

    Past designs of complex aerospace systems involved an environment consisting of collocated design teams with project managers, technical discipline experts, and other experts (e.g., manufacturing and systems operation). These experts were generally qualified only on the basis of past design experience and typically had access to a limited set of integrated analysis tools. These environments provided less than desirable design fidelity, often lead to the inability of assessing critical programmatic and technical issues (e.g., cost, risk, technical impacts), and generally derived a design that was not necessarily optimized across the entire system. The continually changing, modern aerospace industry demands systems design processes that involve the best talent available (no matter where it resides) and access to the the best design and analysis tools. A solution to these demands involves a design environment referred to as collaborative engineering. The collaborative engineering environment evolving within the National Aeronautics and Space Administration (NASA) is a capability that enables the Agency's engineering infrastructure to interact and use the best state-of-the-art tools and data across organizational boundaries. Using collaborative engineering, the collocated team is replaced with an interactive team structure where the team members are geographical distributed and the best engineering talent can be applied to the design effort regardless of physical location. In addition, a more efficient, higher quality design product is delivered by bringing together the best engineering talent with more up-to-date design and analysis tools. These tools are focused on interactive, multidisciplinary design and analysis with emphasis on the complete life cycle of the system, and they include nontraditional, integrated tools for life cycle cost estimation and risk assessment. NASA has made substantial progress during the last two years in developing a collaborative

  15. Aerospace Systems Design in NASA's Collaborative Engineering Environment

    NASA Technical Reports Server (NTRS)

    Monell, Donald W.; Piland, William M.

    1999-01-01

    Past designs of complex aerospace systems involved an environment consisting of collocated design teams with project managers, technical discipline experts, and other experts (e.g. manufacturing and systems operations). These experts were generally qualified only on the basis of past design experience and typically had access to a limited set of integrated analysis tools. These environments provided less than desirable design fidelity, often lead to the inability of assessing critical programmatic and technical issues (e.g., cost risk, technical impacts), and generally derived a design that was not necessarily optimized across the entire system. The continually changing, modern aerospace industry demands systems design processes that involve the best talent available (no matter where it resides) and access to the best design and analysis tools. A solution to these demands involves a design environment referred to as collaborative engineering. The collaborative engineering environment evolving within the National Aeronautics and Space Administration (NASA) is a capability that enables the Agency's engineering infrastructure to interact and use the best state-of-the-art tools and data across organizational boundaries. Using collaborative engineering, the collocated team is replaced with an interactive team structure where the team members are geographically distributed and the best engineering talent can be applied to the design effort regardless of physical location. In addition, a more efficient, higher quality design product is delivered by bringing together the best engineering talent with more up-to-date design and analysis tools. These tools are focused on interactive, multidisciplinary design and analysis with emphasis on the complete life cycle of the system, and they include nontraditional, integrated tools for life cycle cost estimation and risk assessment. NASA has made substantial progress during the last two years in developing a collaborative

  16. Aerospace energy systems laboratory: Requirements and design approach

    NASA Technical Reports Server (NTRS)

    Glover, Richard D.

    1988-01-01

    The NASA Ames-Dryden Flight Research Facility at Edwards, California, operates a mixed fleet of research aircraft employing nickel-cadmium (NiCd) batteries in a variety of flight-critical applications. Dryden's Battery Systems Laboratory (BSL), a computerized facility for battery maintenance servicing, has developed over two decades into one of the most advanced facilities of its kind in the world. Recently a major BSL upgrade was initiated with the goal of modernization to provide flexibility in meeting the needs of future advanced projects. The new facility will be called the Aerospace Energy Systems Laboratory (AESL) and will employ distributed processing linked to a centralized data base. AESL will be both a multistation servicing facility and a research laboratory for the advancement of energy storage system maintenance techniques. This paper describes the baseline requirements for the AESL and the design approach being taken for its mechanization.

  17. L-C Measurement Acquisition Method for Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Woodard, Stanley E.; Taylor, B. Douglas; Shams, Qamar A.; Fox, Robert L.

    2003-01-01

    This paper describes a measurement acquisition method for aerospace systems that eliminates the need for sensors to have physical connection to a power source (i.e., no lead wires) or to data acquisition equipment. Furthermore, the method does not require the sensors to be in proximity to any form of acquisition hardware. Multiple sensors can be interrogated using this method. The sensors consist of a capacitor, C(p), whose capacitance changes with changes to a physical property, p, electrically connected to an inductor, L. The method uses an antenna to broadcast electromagnetic energy that electrically excites one or more inductive-capacitive sensors via Faraday induction. This method facilitates measurements that were not previously possible because there was no practical means of providing power and data acquisition electrical connections to a sensor. Unlike traditional sensors, which measure only a single physical property, the manner in which the sensing element is interrogated simultaneously allows measurement of at least two unrelated physical properties (e.g., displacement rate and fluid level) by using each constituent of the L-C element. The key to using the method for aerospace applications is to increase the distance between the L-C elements and interrogating antenna; develop all key components to be non-obtrusive and to develop sensing elements that can easily be implemented. Techniques that have resulted in increased distance between antenna and sensor will be presented. Fluid-level measurements and pressure measurements using the acquisition method are demonstrated in the paper.

  18. An Overview of the NASA Aerospace Flight Battery Systems Program

    NASA Technical Reports Server (NTRS)

    Manzo, Michelle A.

    2003-01-01

    The NASA Aerospace Flight Battery Systems Program is an agency-wide effort aimed at ensuring the quality, safety, reliability and performance of flight battery systems for NASA applications. The program provides for the validation of primary and secondary cell and battery level technology advances to ensure their availability and readiness for use in NASA missions. It serves to bridge the gap between the development of technology advances and the realization and incorporation of these advances into mission applications. The program is led by the Glenn Research Center and involves funded task activities at each of the NASA mission centers and JPL. The overall products are safe, reliable, high quality batteries for mission applications. The products are defined along three product lines: 1. Battery Systems Technology - Elements of this task area cover the systems aspects of battery operation and generally apply across chemistries. This includes the development of guidelines documents, the establishment and maintenance of a central battery database that serves a central repository for battery characterization and verification test data from tests performed under the support of this program, the NASA Battery Workshop, and general test facility support. 2. Secondary Battery Technology - l h s task area focuses on the validation of battery technology for nickel-cadmium, nickel-hydrogen, nickel-metal-hydride and lithium-ion secondary battery systems. Standardized test regimes are used to validate the quality of a cell lot or cell design for flight applications. In this area, efforts are now concentrated on the validation and verification of lithium-ion battery technology for aerospace applications. 3. Primary Battery Technology - The safety and reliability aspects for primary lithium battery systems that are used in manned operations on the Shuttle and International Space Station are addressed in the primary battery technology task area. An overview of the task areas

  19. Environmental, Safety, and Health Considerations: Composite Materials in the Aerospace Industry

    NASA Technical Reports Server (NTRS)

    Chu, Huai-Pu (Compiler)

    1994-01-01

    The Aerospace Industries Association, Suppliers of Advanced Composite Materials Association, and the National Aeronautics and Space Administration co-sponsored a conference on 'Environmental, Safety, and Health Considerations--Composite Materials in the Aerospace Industry.' The conference was held in Mesa, Arizona, on October 20-21, 1994. Seventeen papers were presented in four sessions including general information, safety, waste, and emissions from composites. Topics range from product stewardship, best work practice, biotransformation of uncured composite materials, to hazardous waste determination and offgassing of composite materials.

  20. Novel atmospheric extinction measurement techniques for aerospace laser system applications

    NASA Astrophysics Data System (ADS)

    Sabatini, Roberto; Richardson, Mark

    2013-01-01

    Novel techniques for laser beam atmospheric extinction measurements, suitable for manned and unmanned aerospace vehicle applications, are presented in this paper. Extinction measurements are essential to support the engineering development and the operational employment of a variety of aerospace electro-optical sensor systems, allowing calculation of the range performance attainable with such systems in current and likely future applications. Such applications include ranging, weaponry, Earth remote sensing and possible planetary exploration missions performed by satellites and unmanned flight vehicles. Unlike traditional LIDAR methods, the proposed techniques are based on measurements of the laser energy (intensity and spatial distribution) incident on target surfaces of known geometric and reflective characteristics, by means of infrared detectors and/or infrared cameras calibrated for radiance. Various laser sources can be employed with wavelengths from the visible to the far infrared portions of the spectrum, allowing for data correlation and extended sensitivity. Errors affecting measurements performed using the proposed methods are discussed in the paper and algorithms are proposed that allow a direct determination of the atmospheric transmittance and spatial characteristics of the laser spot. These algorithms take into account a variety of linear and non-linear propagation effects. Finally, results are presented relative to some experimental activities performed to validate the proposed techniques. Particularly, data are presented relative to both ground and flight trials performed with laser systems operating in the near infrared (NIR) at λ = 1064 nm and λ = 1550 nm. This includes ground tests performed with 10 Hz and 20 kHz PRF NIR laser systems in a large variety of atmospheric conditions, and flight trials performed with a 10 Hz airborne NIR laser system installed on a TORNADO aircraft, flying up to altitudes of 22,000 ft.

  1. A Systems Engineering Approach to Quality Assurance for Aerospace Testing

    NASA Technical Reports Server (NTRS)

    Shepherd, Christena C.

    2014-01-01

    On the surface, it appears that AS9100 has little to say about how to apply a Quality Management System (QMS) to major aerospace test programs (or even smaller ones). It also appears that there is little in the quality engineering Body of Knowledge (BOK) that applies to testing, unless it is nondestructive examination (NDE), or some type of lab or bench testing associated with the manufacturing process. However, if one examines: a) how the systems engineering (SE) processes are implemented throughout a test program; and b) how these SE processes can be mapped to the requirements of AS9100, a number of areas for involvement of the quality professional are revealed. What often happens is that quality assurance during a test program is limited to inspections of the test article; what could be considered a manufacturing al fresco approach. This limits the quality professional and is a disservice to the programs and projects, since there are a number of ways that quality can enhance critical processes, and support efforts to improve risk reduction, efficiency and effectiveness. The Systems Engineering (SE) discipline is widely used in aerospace to ensure the progress from Stakeholder Expectations (the President, Congress, the taxpayers) to a successful, delivered product or service. Although this is well known, what is not well known is that these same SE processes are implemented in varying complexity, to prepare for and implement test projects that support research, development, verification and validation, qualification, and acceptance test projects. Although the test organization's terminology may vary from the SE terminology, and from one test service provider to another, the basic process is followed by successful, reliable testing organizations. For this analysis, NASA Procedural Requirements (NPR) 7123.1, NASA Systems Engineering Processes and Requirements is used to illustrate the SE processes that are used for major aerospace testing. Many of these processes

  2. Advanced Tools and Techniques for Formal Techniques in Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Knight, John C.

    2005-01-01

    This is the final technical report for grant number NAG-1-02101. The title of this grant was "Advanced Tools and Techniques for Formal Techniques In Aerospace Systems". The principal investigator on this grant was Dr. John C. Knight of the Computer Science Department, University of Virginia, Charlottesville, Virginia 22904-4740. This report summarizes activities under the grant during the period 7/01/2002 to 9/30/2004. This report is organized as follows. In section 2, the technical background of the grant is summarized. Section 3 lists accomplishments and section 4 lists students funded under the grant. In section 5, we present a list of presentations given at various academic and research institutions about the research conducted. Finally, a list of publications generated under this grant is included in section 6.

  3. Internal computational fluid mechanics on supercomputers for aerospace propulsion systems

    NASA Technical Reports Server (NTRS)

    Andersen, Bernhard H.; Benson, Thomas J.

    1987-01-01

    The accurate calculation of three-dimensional internal flowfields for application towards aerospace propulsion systems requires computational resources available only on supercomputers. A survey is presented of three-dimensional calculations of hypersonic, transonic, and subsonic internal flowfields conducted at the Lewis Research Center. A steady state Parabolized Navier-Stokes (PNS) solution of flow in a Mach 5.0, mixed compression inlet, a Navier-Stokes solution of flow in the vicinity of a terminal shock, and a PNS solution of flow in a diffusing S-bend with vortex generators are presented and discussed. All of these calculations were performed on either the NAS Cray-2 or the Lewis Research Center Cray XMP.

  4. An overview of Ball Aerospace cryogen storage and delivery systems

    NASA Astrophysics Data System (ADS)

    Marquardt, J.; Keller, J.; Mills, G.; Schmidt, J.

    2015-12-01

    Starting on the Gemini program in the 1960s, Beech Aircraft (now Ball Aerospace) has been designing and manufacturing dewars for a variety of cryogens including liquid hydrogen and oxygen. These dewars flew on the Apollo, Skylab and Space Shuttle spacecraft providing fuel cell reactants resulting in over 150 manned spaceflights. Since Space Shuttle, Ball has also built the liquid hydrogen fuel tanks for the Boeing Phantom Eye unmanned aerial vehicle. Returning back to its fuel cell days, Ball has designed, built and tested a volume-constrained liquid hydrogen and oxygen tank system for reactant delivery to fuel cells on unmanned undersea vehicles (UUVs). Herein past history of Ball technology is described. Testing has been completed on the UUV specific design, which will be described.

  5. Internal fluid mechanics research on supercomputers for aerospace propulsion systems

    NASA Technical Reports Server (NTRS)

    Miller, Brent A.; Anderson, Bernhard H.; Szuch, John R.

    1988-01-01

    The Internal Fluid Mechanics Division of the NASA Lewis Research Center is combining the key elements of computational fluid dynamics, aerothermodynamic experiments, and advanced computational technology to bring internal computational fluid mechanics (ICFM) to a state of practical application for aerospace propulsion systems. The strategies used to achieve this goal are to: (1) pursue an understanding of flow physics, surface heat transfer, and combustion via analysis and fundamental experiments, (2) incorporate improved understanding of these phenomena into verified 3-D CFD codes, and (3) utilize state-of-the-art computational technology to enhance experimental and CFD research. Presented is an overview of the ICFM program in high-speed propulsion, including work in inlets, turbomachinery, and chemical reacting flows. Ongoing efforts to integrate new computer technologies, such as parallel computing and artificial intelligence, into high-speed aeropropulsion research are described.

  6. Complex multidisciplinary system composition for aerospace vehicle conceptual design

    NASA Astrophysics Data System (ADS)

    Gonzalez, Lex

    Although, there exists a vast amount of work concerning the analysis, design, integration of aerospace vehicle systems, there is no standard for how this data and knowledge should be combined in order to create a synthesis system. Each institution creating a synthesis system has in house vehicle and hardware components they are attempting to model and proprietary methods with which to model them. This leads to the fact that synthesis systems begin as one-off creations meant to answer a specific problem. As the scope of the synthesis system grows to encompass more and more problems, so does its size and complexity; in order for a single synthesis system to answer multiple questions the number of methods and method interface must increase. As a means to curtail the requirement that the increase of an aircraft synthesis systems capability leads to an increase in its size and complexity, this research effort focuses on the idea that each problem in aerospace requires its own analysis framework. By focusing on the creation of a methodology which centers on the matching of an analysis framework towards the problem being solved, the complexity of the analysis framework is decoupled from the complexity of the system that creates it. The derived methodology allows for the composition of complex multi-disciplinary systems (CMDS) through the automatic creation and implementation of system and disciplinary method interfaces. The CMDS Composition process follows a four step methodology meant to take a problem definition and progress towards the creation of an analysis framework meant to answer said problem. The unique implementation of the CMDS Composition process take user selected disciplinary analysis methods and automatically integrates them, together in order to create a syntactically composable analysis framework. As a means of assessing the validity of the CMDS Composition process a prototype system (AVDDBMS) has been developed. AVD DBMS has been used to model the

  7. An International Aerospace Information System: A Cooperative Opportunity.

    ERIC Educational Resources Information Center

    Blados, Walter R.; Cotter, Gladys A.

    1992-01-01

    Introduces and discusses ideas and issues relevant to the international unification of scientific and technical information (STI) through development of an international aerospace database (IAD). Specific recommendations for improving the National Aeronautics and Space Administration Aerospace Database (NAD) and for implementing IAD are given.…

  8. Fourth NASA Workshop on Computational Control of Flexible Aerospace Systems, part 2

    NASA Technical Reports Server (NTRS)

    Taylor, Lawrence W., Jr. (Compiler)

    1991-01-01

    A collection of papers presented at the Fourth NASA Workshop on Computational Control of Flexible Aerospace Systems is given. The papers address modeling, systems identification, and control of flexible aircraft, spacecraft and robotic systems.

  9. Aerospace Power Systems Design and Analysis (APSDA) Tool

    NASA Technical Reports Server (NTRS)

    Truong, Long V.

    1998-01-01

    The conceptual design of space and/or planetary electrical power systems has required considerable effort. Traditionally, in the early stages of the design cycle (conceptual design), the researchers have had to thoroughly study and analyze tradeoffs between system components, hardware architectures, and operating parameters (such as frequencies) to optimize system mass, efficiency, reliability, and cost. This process could take anywhere from several months to several years (as for the former Space Station Freedom), depending on the scale of the system. Although there are many sophisticated commercial software design tools for personal computers (PC's), none of them can support or provide total system design. To meet this need, researchers at the NASA Lewis Research Center cooperated with Professor George Kusic from the University of Pittsburgh to develop a new tool to help project managers and design engineers choose the best system parameters as quickly as possible in the early design stages (in days instead of months). It is called the Aerospace Power Systems Design and Analysis (APSDA) Tool. By using this tool, users can obtain desirable system design and operating parameters such as system weight, electrical distribution efficiency, bus power, and electrical load schedule. With APSDA, a large-scale specific power system was designed in a matter of days. It is an excellent tool to help designers make tradeoffs between system components, hardware architectures, and operation parameters in the early stages of the design cycle. user interface. It operates on any PC running the MS-DOS (Microsoft Corp.) operating system, version 5.0 or later. A color monitor (EGA or VGA) and two-button mouse are required. The APSDA tool was presented at the 30th Intersociety Energy Conversion Engineering Conference (IECEC) and is being beta tested at several NASA centers. Beta test packages are available for evaluation by contacting the author.

  10. Engineering derivatives from biological systems for advanced aerospace applications

    NASA Technical Reports Server (NTRS)

    Winfield, Daniel L.; Hering, Dean H.; Cole, David

    1991-01-01

    The present study consisted of a literature survey, a survey of researchers, and a workshop on bionics. These tasks produced an extensive annotated bibliography of bionics research (282 citations), a directory of bionics researchers, and a workshop report on specific bionics research topics applicable to space technology. These deliverables are included as Appendix A, Appendix B, and Section 5.0, respectively. To provide organization to this highly interdisciplinary field and to serve as a guide for interested researchers, we have also prepared a taxonomy or classification of the various subelements of natural engineering systems. Finally, we have synthesized the results of the various components of this study into a discussion of the most promising opportunities for accelerated research, seeking solutions which apply engineering principles from natural systems to advanced aerospace problems. A discussion of opportunities within the areas of materials, structures, sensors, information processing, robotics, autonomous systems, life support systems, and aeronautics is given. Following the conclusions are six discipline summaries that highlight the potential benefits of research in these areas for NASA's space technology programs.

  11. Additive Manufacturing Enabled Ubiquitous Sensing in Aerospace and Integrated Building Systems

    NASA Astrophysics Data System (ADS)

    Mantese, Joseph

    2015-03-01

    Ubiquitous sensing is rapidly emerging as a means for globally optimizing systems of systems by providing both real time PHM (prognostics, diagnostics, and health monitoring), as well as expanded in-the-loop control. In closed or proprietary systems, such as in aerospace vehicles and life safety or security building systems; wireless signals and power must be supplied to a sensor network via single or multiple data concentrators in an architecture that ensures reliable/secure interconnectivity. In addition, such networks must be robust to environmental factors, including: corrosion, EMI/RFI, and thermal/mechanical variations. In this talk, we describe the use of additive manufacturing processes guided by physics based models for seamlessly embedding a sensor suite into aerospace and building system components; while maintaining their structural integrity and providing wireless power, sensor interrogation, and real-time diagnostics. We detail this approach as it specifically applies to industrial gas turbines for stationary land power. This work is supported through a grant from the National Energy Technology Laboratory (NETL), a division of the Department of Energy.

  12. Development of components for waste management systems using aerospace technology

    SciTech Connect

    Rousar, D.; Young, M.; Sieger, A.

    1995-09-01

    An aerospace fluid management technology called ``platelets`` has been applied to components that are critical to the economic operation of waste management systems. Platelet devices are made by diffusion bonding thin metal plates which have been etched with precise flow passage circuitry to control and meter fluid to desired locations. Supercritical water oxidation (SCWO) is a promising waste treatment technology for safe and environmentally acceptable destruction of hazardous wastes. Performance and economics of current SCWO systems are limited by severe salt deposition on and corrosion of the reactor walls. A platelet transpiring-wall reactor has been developed that provides a protective layer of water adjacent to the reactor walls which prevents salt deposition and corrosion. Plasma arc processing is being considered as a method for stabilizing mixed radioactive wastes. Plasma arc torch systems currently require frequent shutdown to replace failed electrodes and this increases operating costs. A platelet electrode design was developed that has more than 10 times the life of conventional electrodes. It has water cooling channels internal to the electrode wall and slots through the wall for injecting gas into the arc.

  13. Reliability Constrained Priority Load Shedding for Aerospace Power System Automation

    NASA Technical Reports Server (NTRS)

    Momoh, James A.; Zhu, Jizhong; Kaddah, Sahar S.; Dolce, James L. (Technical Monitor)

    2000-01-01

    The need for improving load shedding on board the space station is one of the goals of aerospace power system automation. To accelerate the optimum load-shedding functions, several constraints must be involved. These constraints include congestion margin determined by weighted probability contingency, component/system reliability index, generation rescheduling. The impact of different faults and indices for computing reliability were defined before optimization. The optimum load schedule is done based on priority, value and location of loads. An optimization strategy capable of handling discrete decision making, such as Everett optimization, is proposed. We extended Everett method to handle expected congestion margin and reliability index as constraints. To make it effective for real time load dispatch process, a rule-based scheme is presented in the optimization method. It assists in selecting which feeder load to be shed, the location of the load, the value, priority of the load and cost benefit analysis of the load profile is included in the scheme. The scheme is tested using a benchmark NASA system consisting of generators, loads and network.

  14. A Systems Engineering Approach to Quality Assurance for Aerospace Testing

    NASA Technical Reports Server (NTRS)

    Shepherd, Christena C.

    2015-01-01

    On the surface, it appears that AS91001 has little to say about how to apply a Quality Management System (QMS) to major aerospace test programs (or even smaller ones). It also appears that there is little in the quality engineering Body of Knowledge (BOK)2 that applies to testing, unless it is nondestructive examination (NDE), or some type of lab or bench testing associated with the manufacturing process. However, if one examines: a) how the systems engineering (SE) processes are implemented throughout a test program; and b) how these SE processes can be mapped to the requirements of AS9100, a number of areas for involvement of the quality professional are revealed. What often happens is that quality assurance during a test program is limited to inspections of the test article; what could be considered a manufacturing al fresco approach. This limits the quality professional and is a disservice to the programs and projects, since there are a number of ways that quality can enhance critical processes, and support efforts to improve risk reduction, efficiency and effectiveness.

  15. SEISES: A Process Framework for Safe and Secure Aerospace Systems

    NASA Astrophysics Data System (ADS)

    Bieber, Pierre; Blanquart, Jean-Paul; Descargues, Gilles; Sarouille, Gabrielle; Dulucq, Michael; Fourastier, Yannick; Hazane, Eric; Julien, Mathias; Leonardon, Laurent

    2012-08-01

    Recent trends in the design of avionics platform make it credible that accidental or intentional misuse of aircraft or spacecraft information occur. New platforms have increased the interconnectivity of equipment both within the aircraft or spacecraft and with on-ground systems. Such a platform is made of a very wide range of software and hardware items and the avionics platform could be the target of security attacks that try to impact safety.In particular, airworthiness has to be ensured in the presence of aircraft information misuse. In the past ten years, aircraft industry, certification authorities and research organizations have been working to deal with this important matter. New functions were designed to protect avionics platforms, regulations addressing security were issued and joint working groups were established to build applicable standards. In particular, EUROCAE WG72 has published in October 2010 a document [1] that defines a security process for airworthiness.In that context, partners of the SEISES project have investigated, from October 2008 to December 2011, assurance aspects of the development of secure and safe embedded aerospace systems. This paper details two outcomes of the project: a joint framework that groups and organizes security and safety assurance activities and the lessons learnt by applying this framework on three industrial demonstrators.

  16. Development of aerospace nursing.

    PubMed

    Barron, N J

    1975-04-01

    In the initial development, the primary purpose of the USAF aerospace nursing program was to prepare the nurse to function as an integral member of the aerospace medical team in support of bioastronautics, occupational health and aerospace medical research programs. The absence of an expanded manned space program has required the aerospace nurse to redirect her energies toward the immediate needs of the aerospace medicine program. Many of the aerospace nurse's more specific functions are dependent upon the mission objectives of the command and military base to which she is assigned. Aerospace nursing reflects a concern for the total health needs of the Air Force community and the application of a holistic approach. It includes all aspects of health and all environmental hazards which alter health. The development of aerospace nursing paves the way for this expanded view of nursing practice.

  17. Fiber Optic Thermal Health Monitoring of Aerospace Structures and Materials

    NASA Technical Reports Server (NTRS)

    Wu, Meng-Chou; Winfree, William P.; Allison, Sidney G.

    2009-01-01

    A new technique is presented for thermographic detection of flaws in materials and structures by performing temperature measurements with fiber Bragg gratings. Individual optical fibers with multiple Bragg gratings employed as surface temperature sensors were bonded to the surfaces of structures with subsurface defects or thickness variations. Both during and following the application of a thermal heat flux to the surface, the individual Bragg grating sensors measured the temporal and spatial temperature variations. The investigated structures included a 10-ply composite specimen with subsurface delaminations of various sizes and depths. The data obtained from grating sensors were further analyzed with thermal modeling to reveal particular characteristics of the interested areas. These results were found to be consistent with those from conventional thermography techniques. Limitations of the technique were investigated using both experimental and numerical simulation techniques. Methods for performing in-situ structural health monitoring are discussed.

  18. Towards Requirements in Systems Engineering for Aerospace IVHM Design

    NASA Technical Reports Server (NTRS)

    Saxena, Abhinav; Roychoudhury, Indranil; Lin, Wei; Goebel, Kai

    2013-01-01

    Health management (HM) technologies have been employed for safety critical system for decades, but a coherent systematic process to integrate HM into the system design is not yet clear. Consequently, in most cases, health management resorts to be an after-thought or 'band-aid' solution. Moreover, limited guidance exists for carrying out systems engineering (SE) on the subject of writing requirements for designs with integrated vehicle health management (IVHM). It is well accepted that requirements are key to developing a successful IVHM system right from the concept stage to development, verification, utilization, and support. However, writing requirements for systems with IVHM capability have unique challenges that require the designers to look beyond their own domains and consider the constraints and specifications of other interlinked systems. In this paper we look at various stages in the SE process and identify activities specific to IVHM design and development. More importantly, several relevant questions are posed that system engineers must address at various design and development stages. Addressing these questions should provide some guidance to systems engineers towards writing IVHM related requirements to ensure that appropriate IVHM functions are built into the system design.

  19. Current research activities at the NASA-sponsored Illinois Computing Laboratory of Aerospace Systems and Software

    NASA Technical Reports Server (NTRS)

    Smith, Kathryn A.

    1994-01-01

    The Illinois Computing Laboratory of Aerospace Systems and Software (ICLASS) was established to: (1) pursue research in the areas of aerospace computing systems, software and applications of critical importance to NASA, and (2) to develop and maintain close contacts between researchers at ICLASS and at various NASA centers to stimulate interaction and cooperation, and facilitate technology transfer. Current ICLASS activities are in the areas of parallel architectures and algorithms, reliable and fault tolerant computing, real time systems, distributed systems, software engineering and artificial intelligence.

  20. NASA Glenn Research in Controls and Diagnostics for Intelligent Aerospace Propulsion Systems

    NASA Technical Reports Server (NTRS)

    Garg, Sanjay

    2007-01-01

    With the increased emphasis on aircraft safety, enhanced performance and affordability, and the need to reduce the environmental impact of aircraft, there are many new challenges being faced by the designers of aircraft propulsion systems. The Controls and Dynamics Branch (CDB) at NASA (National Aeronautics and Space Administration) Glenn Research Center (GRC) in Cleveland, Ohio, is leading and participating in various projects in partnership with other organizations within GRC and across NASA, the U.S. aerospace industry, and academia to develop advanced controls and health management technologies that will help meet these challenges through the concept of Intelligent Propulsion Systems. This presentation describes the current CDB activities in support of the NASA Aeronautics Research Mission, with an emphasis on activities under the Integrated Vehicle Health Management (IVHM) and Integrated Resilient Aircraft Control (IRAC) projects of the Aviation Safety Program. Under IVHM, CDB focus is on developing advanced techniques for monitoring the health of the aircraft engine gas path with a focus on reliable and early detection of sensor, actuator and engine component faults. Under IRAC, CDB focus is on developing adaptive engine control technologies which will increase the probability of survival of aircraft in the presence of damage to flight control surfaces or to one or more engines. The technology development plans are described as well as results from recent research accomplishments.

  1. Competitive assessment of aerospace systems using system dynamics

    NASA Astrophysics Data System (ADS)

    Pfaender, Jens Holger

    Aircraft design has recently experienced a trend away from performance centric design towards a more balanced approach with increased emphasis on engineering an economically successful system. This approach focuses on bringing forward a comprehensive economic and life-cycle cost analysis. Since the success of any system also depends on many external factors outside of the control of the designer, this traditionally has been modeled as noise affecting the uncertainty of the design. However, this approach is currently lacking a strategic treatment of necessary early decisions affecting the probability of success of a given concept in a dynamic environment. This suggests that the introduction of a dynamic method into a life-cycle cost analysis should allow the analysis of the future attractiveness of such a concept in the presence of uncertainty. One way of addressing this is through the use of a competitive market model. However, existing market models do not focus on the dynamics of the market. Instead, they focus on modeling and predicting market share through logit regression models. The resulting models exhibit relatively poor predictive capabilities. The method proposed here focuses on a top-down approach that integrates a competitive model based on work in the field of system dynamics into the aircraft design process. Demonstrating such integration is one of the primary contributions of this work, which previously has not been demonstrated. This integration is achieved through the use of surrogate models, in this case neural networks. This enabled not only the practical integration of analysis techniques, but also reduced the computational requirements so that interactive exploration as envisioned was actually possible. The example demonstration of this integration is built on the competition in the 250 seat large commercial aircraft market exemplified by the Boeing 767-400ER and the Airbus A330-200. Both aircraft models were calibrated to existing performance

  2. Analysis and Perspective from the Complex Aerospace Systems Exchange (CASE) 2013

    NASA Technical Reports Server (NTRS)

    Jones, Kennie H.; Parker, Peter A.; Detweiler, Kurt N.; McGowan, Anna-Maria R.; Dress, David A.; Kimmel, William M.

    2014-01-01

    NASA Langley Research Center embedded four rapporteurs at the Complex Aerospace Systems Exchange (CASE) held in August 2013 with the objective to capture the essence of the conference presentations and discussions. CASE was established to provide a discussion forum among chief engineers, program managers, and systems engineers on challenges in the engineering of complex aerospace systems. The meeting consists of invited presentations and panels from industry, academia, and government followed by discussions among attendees. This report presents the major and reoccurring themes captured throughout the meeting and provides analysis and insights to further the CASE mission.

  3. Smart Sensor Systems for Aerospace Applications: From Sensor Development to Application Testing

    NASA Technical Reports Server (NTRS)

    Hunter, G. W.; Xu, J. C.; Dungan, L. K.; Ward, B. J.; Rowe, S.; Williams, J.; Makel, D. B.; Liu, C. C.; Chang, C. W.

    2008-01-01

    The application of Smart Sensor Systems for aerospace applications is a multidisciplinary process consisting of sensor element development, element integration into Smart Sensor hardware, and testing of the resulting sensor systems in application environments. This paper provides a cross-section of these activities for multiple aerospace applications illustrating the technology challenges involved. The development and application testing topics discussed are: 1) The broadening of sensitivity and operational range of silicon carbide (SiC) Schottky gas sensor elements; 2) Integration of fire detection sensor technology into a "Lick and Stick" Smart Sensor hardware platform for Crew Exploration Vehicle applications; 3) Extended testing for zirconia based oxygen sensors in the basic "Lick and Stick" platform for environmental monitoring applications. It is concluded that that both core sensor platform technology and a basic hardware platform can enhance the viability of implementing smart sensor systems in aerospace applications.

  4. NASA Glenn Research in Controls and Diagnostics for Intelligent Aerospace Propulsion Systems

    NASA Technical Reports Server (NTRS)

    2005-01-01

    With the increased emphasis on aircraft safety, enhanced performance and affordability, and the need to reduce the environmental impact of aircraft, there are many new challenges being faced by the designers of aircraft propulsion systems. Also the propulsion systems required to enable the NASA (National Aeronautics and Space Administration) Vision for Space Exploration in an affordable manner will need to have high reliability, safety and autonomous operation capability. The Controls and Dynamics Branch at NASA Glenn Research Center (GRC) in Cleveland, Ohio, is leading and participating in various projects in partnership with other organizations within GRC and across NASA, the U.S. aerospace industry, and academia to develop advanced controls and health management technologies that will help meet these challenges through the concept of Intelligent Propulsion Systems. The key enabling technologies for an Intelligent Propulsion System are the increased efficiencies of components through active control, advanced diagnostics and prognostics integrated with intelligent engine control to enhance operational reliability and component life, and distributed control with smart sensors and actuators in an adaptive fault tolerant architecture. This paper describes the current activities of the Controls and Dynamics Branch in the areas of active component control and propulsion system intelligent control, and presents some recent analytical and experimental results in these areas.

  5. A new SMART sensing system for aerospace structures

    NASA Astrophysics Data System (ADS)

    Zhang, David C.; Yu, Pin; Beard, Shawn; Qing, Peter; Kumar, Amrita; Chang, Fu-Kuo

    2007-04-01

    It is essential to ensure the safety and reliability of in-service structures such as unmanned vehicles by detecting structural cracking, corrosion, delamination, material degradation and other types of damage in time. Utilization of an integrated sensor network system can enable automatic inspection of such damages ultimately. Using a built-in network of actuators and sensors, Acellent is providing tools for advanced structural diagnostics. Acellent's integrated structural health monitoring system consists of an actuator/sensor network, supporting signal generation and data acquisition hardware, and data processing, visualization and analysis software. This paper describes the various features of Acellent's latest SMART sensing system. The new system is USB-based and is ultra-portable using the state-of-the-art technology, while delivering many functions such as system self-diagnosis, sensor diagnosis, through-transmission mode and pulse-echo mode of operation and temperature measurement. Performance of the new system was evaluated for assessment of damage in composite structures.

  6. A preliminary investigation of the potential applicability of the IPAD system to non-aerospace industry

    NASA Technical Reports Server (NTRS)

    Hulbert, L. E.

    1975-01-01

    A study of the applicability of the planned Integrated Programs for Aerospace-Vehicle Design (IPAD) system to the design activities of non-aerospace industries was carried out. It was determined that IPAD could be of significant benefit to a number of industries, with the most likely users being the heavy construction and automotive industries. Two additional short studies were initiated to investigate the possible impact of IPAD on a national energy program and on urban and regional planning activities of local and state governments. These initial studies indicated the possibility of significant payoff in these areas and the need for further investigations. It was also determined that utilization of IPAD by non-aerospace industries will probably involve a long stepwise process, since these industries maintain a policy of gradual introduction of new technology.

  7. The Numerical Propulsion System Simulation: A Multidisciplinary Design System for Aerospace Vehicles

    NASA Technical Reports Server (NTRS)

    Lytle, John K.

    1999-01-01

    Advances in computational technology and in physics-based modeling are making large scale, detailed simulations of complex systems possible within the design environment. For example, the integration of computing, communications, and aerodynamics has reduced the time required to analyze ma or propulsion system components from days and weeks to minutes and hours. This breakthrough has enabled the detailed simulation of major propulsion system components to become a routine part of design process and to provide the designer with critical information about the components early in the design process. This paper describes the development of the Numerical Propulsion System Simulation (NPSS), a multidisciplinary system of analysis tools that is focussed on extending the simulation capability from components to the full system. This will provide the product developer with a "virtual wind tunnel" that will reduce the number of hardware builds and tests required during the development of advanced aerospace propulsion systems.

  8. Enabling the Discovery of Recurring Anomalies in Aerospace System Problem Reports using High-Dimensional Clustering Techniques

    NASA Technical Reports Server (NTRS)

    Srivastava, Ashok, N.; Akella, Ram; Diev, Vesselin; Kumaresan, Sakthi Preethi; McIntosh, Dawn M.; Pontikakis, Emmanuel D.; Xu, Zuobing; Zhang, Yi

    2006-01-01

    This paper describes the results of a significant research and development effort conducted at NASA Ames Research Center to develop new text mining techniques to discover anomalies in free-text reports regarding system health and safety of two aerospace systems. We discuss two problems of significant importance in the aviation industry. The first problem is that of automatic anomaly discovery about an aerospace system through the analysis of tens of thousands of free-text problem reports that are written about the system. The second problem that we address is that of automatic discovery of recurring anomalies, i.e., anomalies that may be described m different ways by different authors, at varying times and under varying conditions, but that are truly about the same part of the system. The intent of recurring anomaly identification is to determine project or system weakness or high-risk issues. The discovery of recurring anomalies is a key goal in building safe, reliable, and cost-effective aerospace systems. We address the anomaly discovery problem on thousands of free-text reports using two strategies: (1) as an unsupervised learning problem where an algorithm takes free-text reports as input and automatically groups them into different bins, where each bin corresponds to a different unknown anomaly category; and (2) as a supervised learning problem where the algorithm classifies the free-text reports into one of a number of known anomaly categories. We then discuss the application of these methods to the problem of discovering recurring anomalies. In fact the special nature of recurring anomalies (very small cluster sizes) requires incorporating new methods and measures to enhance the original approach for anomaly detection. ?& pant 0-

  9. 75 FR 3141 - Airworthiness Directives; AVOX Systems and B/E Aerospace Oxygen Cylinder Assemblies, as Installed...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-20

    ... B/E Aerospace Oxygen Cylinder Assemblies, as Installed on Various Transport Airplanes AGENCY... AVOX Systems and B/E Aerospace oxygen cylinder assemblies, as installed on various transport airplanes. That AD currently requires removing certain oxygen cylinder assemblies from the airplane. This...

  10. Scenario-Based Specification and Evaluation of Architectures for Health Monitoring of Aerospace Structures

    NASA Technical Reports Server (NTRS)

    Mukkamala, Ravi; Sundaram, P.

    2001-01-01

    HUMS systems have been an area of increased research in the recent times due to two main reasons: (a) increase in the occurrences of accidents in the aerospace, and (b) stricter FAA regulations on aircrafts maintenance [2]. There are several problems associated with the maintenance of aircrafts that the HUMS systems can solve through the use of several monitoring technologies.This paper documents our methodology of employing scenarios in the specification and evaluation of architecture for HUMS. Section 2 investigates related works that use scenarios in software development. Section 3 describes how we use scenarios in our work, which is followed by a demonstration of our methods in the development of KUMS in section 4. Conclusion summarizes results.

  11. Development of integrated programs for Aerospace-vehicle Design (IPAD): Product program management systems

    NASA Technical Reports Server (NTRS)

    Isenberg, J. M.; Southall, J. W.

    1979-01-01

    The Integrated Programs for Aerospace Vehicle Design (IPAD) is a computing system to support company-wide design information processing. This document presents a brief description of the management system used to direct and control a product-oriented program. This document, together with the reference design process (CR 2981) and the manufacture interactions with the design process (CR 2982), comprises the reference information that forms the basis for specifying IPAD system requirements.

  12. Fiber Bragg Grating Sensor System for Monitoring Smart Composite Aerospace Structures

    NASA Technical Reports Server (NTRS)

    Moslehi, Behzad; Black, Richard J.; Gowayed, Yasser

    2012-01-01

    Lightweight, electromagnetic interference (EMI) immune, fiber-optic, sensor- based structural health monitoring (SHM) will play an increasing role in aerospace structures ranging from aircraft wings to jet engine vanes. Fiber Bragg Grating (FBG) sensors for SHM include advanced signal processing, system and damage identification, and location and quantification algorithms. Potentially, the solution could be developed into an autonomous onboard system to inspect and perform non-destructive evaluation and SHM. A novel method has been developed to massively multiplex FBG sensors, supported by a parallel processing interrogator, which enables high sampling rates combined with highly distributed sensing (up to 96 sensors per system). The interrogation system comprises several subsystems. A broadband optical source subsystem (BOSS) and routing and interface module (RIM) send light from the interrogation system to a composite embedded FBG sensor matrix, which returns measurand-dependent wavelengths back to the interrogation system for measurement with subpicometer resolution. In particular, the returned wavelengths are channeled by the RIM to a photonic signal processing subsystem based on powerful optical chips, then passed through an optoelectronic interface to an analog post-detection electronics subsystem, digital post-detection electronics subsystem, and finally via a data interface to a computer. A range of composite structures has been fabricated with FBGs embedded. Stress tensile, bending, and dynamic strain tests were performed. The experimental work proved that the FBG sensors have a good level of accuracy in measuring the static response of the tested composite coupons (down to submicrostrain levels), the capability to detect and monitor dynamic loads, and the ability to detect defects in composites by a variety of methods including monitoring the decay time under different dynamic loading conditions. In addition to quasi-static and dynamic load monitoring, the

  13. Development of Parametric Mass and Volume Models for an Aerospace SOFC/Gas Turbine Hybrid System

    NASA Technical Reports Server (NTRS)

    Tornabene, Robert; Wang, Xiao-yen; Steffen, Christopher J., Jr.; Freeh, Joshua E.

    2005-01-01

    In aerospace power systems, mass and volume are key considerations to produce a viable design. The utilization of fuel cells is being studied for a commercial aircraft electrical power unit. Based on preliminary analyses, a SOFC/gas turbine system may be a potential solution. This paper describes the parametric mass and volume models that are used to assess an aerospace hybrid system design. The design tool utilizes input from the thermodynamic system model and produces component sizing, performance, and mass estimates. The software is designed such that the thermodynamic model is linked to the mass and volume model to provide immediate feedback during the design process. It allows for automating an optimization process that accounts for mass and volume in its figure of merit. Each component in the system is modeled with a combination of theoretical and empirical approaches. A description of the assumptions and design analyses is presented.

  14. NASA Engineering Safety Center NASA Aerospace Flight Battery Systems Working Group 2007 Proactive Task Status

    NASA Technical Reports Server (NTRS)

    Manzo, Michelle A.

    2007-01-01

    In 2007, the NASA Engineering Safety Center (NESC) chartered the NASA Aerospace Flight Battery Systems Working Group to bring forth and address critical battery-related performance/manufacturing issues for NASA and the aerospace community. A suite of tasks identifying and addressing issues related to Ni-H2 and Li-ion battery chemistries was submitted and selected for implementation. The current NESC funded are: (1) Wet Life of Ni-H2 Batteries (2) Binding Procurement (3) NASA Lithium-Ion Battery Guidelines (3a) Li-Ion Performance Assessment (3b) Li-Ion Guidelines Document (3b-i) Assessment of Applicability of Pouch Cells for Aerospace Missions (3b-ii) High Voltage Risk Assessment (3b-iii) Safe Charge Rates for Li-Ion Cells (4) Availability of Source Material for Li-Ion Cells (5) NASA Aerospace Battery Workshop This presentation provides a brief overview of the tasks in the 2007 plan and serves as an introduction to more detailed discussions on each of the specific tasks.

  15. Performance prediction of a synchronization link for distributed aerospace wireless systems.

    PubMed

    Wang, Wen-Qin; Shao, Huaizong

    2013-01-01

    For reasons of stealth and other operational advantages, distributed aerospace wireless systems have received much attention in recent years. In a distributed aerospace wireless system, since the transmitter and receiver placed on separated platforms which use independent master oscillators, there is no cancellation of low-frequency phase noise as in the monostatic cases. Thus, high accurate time and frequency synchronization techniques are required for distributed wireless systems. The use of a dedicated synchronization link to quantify and compensate oscillator frequency instability is investigated in this paper. With the mathematical statistical models of phase noise, closed-form analytic expressions for the synchronization link performance are derived. The possible error contributions including oscillator, phase-locked loop, and receiver noise are quantified. The link synchronization performance is predicted by utilizing the knowledge of the statistical models, system error contributions, and sampling considerations. Simulation results show that effective synchronization error compensation can be achieved by using this dedicated synchronization link.

  16. Performance Prediction of a Synchronization Link for Distributed Aerospace Wireless Systems

    PubMed Central

    Shao, Huaizong

    2013-01-01

    For reasons of stealth and other operational advantages, distributed aerospace wireless systems have received much attention in recent years. In a distributed aerospace wireless system, since the transmitter and receiver placed on separated platforms which use independent master oscillators, there is no cancellation of low-frequency phase noise as in the monostatic cases. Thus, high accurate time and frequency synchronization techniques are required for distributed wireless systems. The use of a dedicated synchronization link to quantify and compensate oscillator frequency instability is investigated in this paper. With the mathematical statistical models of phase noise, closed-form analytic expressions for the synchronization link performance are derived. The possible error contributions including oscillator, phase-locked loop, and receiver noise are quantified. The link synchronization performance is predicted by utilizing the knowledge of the statistical models, system error contributions, and sampling considerations. Simulation results show that effective synchronization error compensation can be achieved by using this dedicated synchronization link. PMID:23970828

  17. ASRC Aerospace Corporation Selects Dynamically Reconfigurable Anadigm(Registered Trademark) FPAA For Advanced Data Acquisition System

    NASA Technical Reports Server (NTRS)

    Mata, Carlos T.

    2003-01-01

    Anadigm(registered trademark) today announced that ASRC Aerospace Corporation has designed Anadigm's dynamically reconfigurable Field Programmable Analog Array (FPAA) technology into an advanced data acquisition system developed under contract for NASA. ASRC Aerospace designed in the Anadigm(registered trademark) FPAA to provide complex analog signal conditioning in its intelligent, self-calibrating, and self-healing advanced data acquisition system (ADAS). The ADAS has potential applications in industrial, manufacturing, and aerospace markets. This system offers highly reliable operation while reducing the need for user interaction. Anadigm(registered trademark)'s dynamically reconfigurable FPAAs can be reconfigured in-system by the designer or on the fly by a microprocessor. A single device can thus be programmed to implement multiple analog functions and/or to adapt on-the-fly to maintain precision operation despite system degradation and aging. In the case of the ASRC advanced data acquisition system, the FPAA helps ensure that the system will continue to operating at 100% functionality despite changes in the environment, component degradation, and/or component failures.

  18. Supercomputing in Aerospace

    NASA Technical Reports Server (NTRS)

    Kutler, Paul; Yee, Helen

    1987-01-01

    Topics addressed include: numerical aerodynamic simulation; computational mechanics; supercomputers; aerospace propulsion systems; computational modeling in ballistics; turbulence modeling; computational chemistry; computational fluid dynamics; and computational astrophysics.

  19. Micromechanical Machining Processes and their Application to Aerospace Structures, Devices and Systems

    NASA Technical Reports Server (NTRS)

    Friedrich, Craig R.; Warrington, Robert O.

    1995-01-01

    Micromechanical machining processes are those micro fabrication techniques which directly remove work piece material by either a physical cutting tool or an energy process. These processes are direct and therefore they can help reduce the cost and time for prototype development of micro mechanical components and systems. This is especially true for aerospace applications where size and weight are critical, and reliability and the operating environment are an integral part of the design and development process. The micromechanical machining processes are rapidly being recognized as a complementary set of tools to traditional lithographic processes (such as LIGA) for the fabrication of micromechanical components. Worldwide efforts in the U.S., Germany, and Japan are leading to results which sometimes rival lithography at a fraction of the time and cost. Efforts to develop processes and systems specific to aerospace applications are well underway.

  20. Multiscale Modeling, Simulation and Visualization and Their Potential for Future Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Noor, Ahmed K. (Compiler)

    2002-01-01

    This document contains the proceedings of the Training Workshop on Multiscale Modeling, Simulation and Visualization and Their Potential for Future Aerospace Systems held at NASA Langley Research Center, Hampton, Virginia, March 5 - 6, 2002. The workshop was jointly sponsored by Old Dominion University's Center for Advanced Engineering Environments and NASA. Workshop attendees were from NASA, other government agencies, industry, and universities. The objectives of the workshop were to give overviews of the diverse activities in hierarchical approach to material modeling from continuum to atomistics; applications of multiscale modeling to advanced and improved material synthesis; defects, dislocations, and material deformation; fracture and friction; thin-film growth; characterization at nano and micro scales; and, verification and validation of numerical simulations, and to identify their potential for future aerospace systems.

  1. Aerospace Community. Aerospace Education I.

    ERIC Educational Resources Information Center

    Mickey, V. V.

    This book, one in the series on Aerospace Education I, emphasizes the two sides of aerospace--military aerospace and civilian aerospace. Chapter 1 includes a brief discussion on the organization of Air Force bases and missile sites in relation to their missions. Chapter 2 examines the community services provided by Air Force bases. The topics…

  2. Quantitative Evaluation of the Effect on System Safety Engineer Training Course for the Aerospace Development

    NASA Astrophysics Data System (ADS)

    Sekita, Ryuichi; Yamada, Shu

    The system safety has been being applied in Japan Aerospace Exploration Agency (JAXA) ‧s launch vehicle and satellite development projects. The engineering state of system safety has some room for improvement. Therefore, JAXA is continuously working for system safety improvement. The system safety engineer training course is the top priority for the improvement. This paper represents the practical training evaluation way using Kirkpatrick‧s 4-level approach and the actual results in JAXA system safety engineer training course. Also this paper represents the importance of the engineer training evaluation as a part of PDCA cycle in the industry field.

  3. Conference on Occupational Health Aspects of Advanced Composite Technology in the Aerospace Industry Held in Dayton, Ohio on 6-9 February 1989. Volume 1. Executive Summary

    DTIC Science & Technology

    1989-03-01

    ITIC FILE (MOPY AAMR1I.TR49OO8 o CONFERENCE ON OCCUPATIONAL HEALTH ASPECTS OF ADVANCED N COMPOSITE TECHNOLOGY IN THE AEROSPACE INDUSTRY VOLUME I...ADDRESS -(City. S00,SANIZI CO*e) 10. SOURCE OF FUNDING NUMBERS PROGRAM PROJECT TASK WORK UNIT ELEMENT NO. NO. NO ACCESSION NO. -- COFREC ON OCCUPs ~cls...conference on the Occupational Health Aspects of Advanced Composite Materials in% the Aerospace Industry, 6-9 February 989, in Dayton, Ohio. The

  4. Development of sensor augmented robotic weld systems for aerospace propulsion system fabrication

    NASA Technical Reports Server (NTRS)

    Jones, C. S.; Gangl, K. J.

    1986-01-01

    In order to meet stringent performance goals for power and reuseability, the Space Shuttle Main Engine was designed with many complex, difficult welded joints that provide maximum strength and minimum weight. To this end, the SSME requires 370 meters of welded joints. Automation of some welds has improved welding productivity significantly over manual welding. Application has previously been limited by accessibility constraints, requirements for complex process control, low production volumes, high part variability, and stringent quality requirements. Development of robots for welding in this application requires that a unique set of constraints be addressed. This paper shows how robotic welding can enhance production of aerospace components by addressing their specific requirements. A development program at the Marshall Space Flight Center combining industrial robots with state-of-the-art sensor systems and computer simulation is providing technology for the automation of welds in Space Shuttle Main Engine production.

  5. Aerospace Dermatology.

    PubMed

    Arora, Gp Capt Sandeep

    2017-01-01

    Evolutionarily, man is a terrestrial mammal, adapted to land. Aviation and now space/microgravity environment, hence, pose new challenges to our physiology. Exposure to these changes affects the human body in acute and chronic settings. Since skin reflects our mental and physical well-being, any change/side effects of this environment shall be detected on the skin. Aerospace industry offers a unique environment with a blend of all possible occupational disorders, encompassing all systems of the body, particularly the skin. Aerospace dermatologists in the near future shall be called upon for their expertise as we continue to push human physiological boundaries with faster and more powerful military aircraft and look to colonize space stations and other planets. Microgravity living shall push dermatology into its next big leap-space, the final frontier. This article discusses the physiological effects of this environment on skin, effect of common dermatoses in aerospace environment, effect of microgravity on skin, and occupational hazards of this industry.

  6. Aerospace Dermatology

    PubMed Central

    Arora, Gp Capt Sandeep

    2017-01-01

    Evolutionarily, man is a terrestrial mammal, adapted to land. Aviation and now space/microgravity environment, hence, pose new challenges to our physiology. Exposure to these changes affects the human body in acute and chronic settings. Since skin reflects our mental and physical well-being, any change/side effects of this environment shall be detected on the skin. Aerospace industry offers a unique environment with a blend of all possible occupational disorders, encompassing all systems of the body, particularly the skin. Aerospace dermatologists in the near future shall be called upon for their expertise as we continue to push human physiological boundaries with faster and more powerful military aircraft and look to colonize space stations and other planets. Microgravity living shall push dermatology into its next big leap-space, the final frontier. This article discusses the physiological effects of this environment on skin, effect of common dermatoses in aerospace environment, effect of microgravity on skin, and occupational hazards of this industry. PMID:28216729

  7. A Hydrogen Leak Detection System for Aerospace and Commercial Applications

    NASA Technical Reports Server (NTRS)

    Hunter, Gary W.; Makel, D. B.; Jansa, E. D.; Patterson, G.; Cova, P. J.; Liu, C. C.; Wu, Q. H.; Powers, W. T.

    1995-01-01

    Leaks on the space shuttle while on the launch pad have generated interest in hydrogen leak monitoring technology. Microfabricated hydrogen sensors are being fabricated at Case Western Reserve University (CWRU) and tested at NASA Lewis Research Center (LeRC). These sensors have been integrated into hardware and software designed by Aerojet. This complete system allows for multipoint leak monitoring designed to provide leak source and magnitude information in real time. The monitoring system processes data from the hydrogen sensors and presents the operator with a visual indication of the leak location and magnitude. Although the leak monitoring system was designed for hydrogen propulsion systems, the possible applications of this monitoring system are wide ranged. This system is in operation in an automotive application which requires high sensitivity to hydrogen.

  8. A hydrogen leak detection system for aerospace and commercial applications

    NASA Astrophysics Data System (ADS)

    Hunter, Gary W.; Makel, D. B.; Jansa, E. D.; Patterson, G.; Cova, P. J.; Liu, C. C.; Wu, Q. H.; Powers, W. T.

    1995-10-01

    Leaks on the space shuttle while on the launch pad have generated interest in hydrogen leak monitoring technology. Microfabricated hydrogen sensors are being fabricated at Case Western Reserve University (CWRU) and tested at NASA Lewis Research Center (LeRC). These sensors have been integrated into hardware and software designed by Aerojet. This complete system allows for multipoint leak monitoring designed to provide leak source and magnitude information in real time. The monitoring system processes data from the hydrogen sensors and presents the operator with a visual indication of the leak location and magnitude. Although the leak monitoring system was designed for hydrogen propulsion systems, the possible applications of this monitoring system are wide ranged. This system is in operation in an automotive application which requires high sensitivity to hydrogen.

  9. An Object Oriented Extensible Architecture for Affordable Aerospace Propulsion Systems

    NASA Technical Reports Server (NTRS)

    Follen, Gregory J.

    2003-01-01

    Driven by a need to explore and develop propulsion systems that exceeded current computing capabilities, NASA Glenn embarked on a novel strategy leading to the development of an architecture that enables propulsion simulations never thought possible before. Full engine 3 Dimensional Computational Fluid Dynamic propulsion system simulations were deemed impossible due to the impracticality of the hardware and software computing systems required. However, with a software paradigm shift and an embracing of parallel and distributed processing, an architecture was designed to meet the needs of future propulsion system modeling. The author suggests that the architecture designed at the NASA Glenn Research Center for propulsion system modeling has potential for impacting the direction of development of affordable weapons systems currently under consideration by the Applied Vehicle Technology Panel (AVT).

  10. Theory and Applications of Optimal Control in Aerospace Systems,

    DTIC Science & Technology

    1981-07-01

    CONTROL OF LINEAR QUADRATIC SYSTEM. Consider, as a particular case of the general problem defined in section 2, a lineal , system with quadratic cost... LARSON Proceeding of the IFAC Stochastic Control Symposium, Budapest, 1974. [36] G. CAMPION "Optimal control of non-linear stochastic systems by...dynamics, an r-component algebraic (or transcendental) equation representing the output, and an r-component equation representing the observation: dx (t

  11. ODIN - Optimal Design Integration system for synthesis of aerospace vehicles

    NASA Technical Reports Server (NTRS)

    Rau, T. R.; Decker, J. P.

    1974-01-01

    The ODIN system is a new design synthesis procedure for solving multiple discipline design problems. In ODIN an unlimited number of independent technology codes can be linked together in the computer in any desired sequence. This paper describes the ODIN system, the executive program DIALOG, the data management technique, and the program library. The use of ODIN is illustrated with an application drawn from space system studies.

  12. NASA Activities as they Relate to Microwave Technology for Aerospace Communications Systems

    NASA Technical Reports Server (NTRS)

    Miranda, Felix A.

    2011-01-01

    This presentation discusses current NASA activities and plans as they relate to microwave technology for aerospace communications. The presentations discusses some examples of the aforementioned technology within the context of the existing and future communications architectures and technology development roadmaps. Examples of the evolution of key technology from idea to deployment are provided as well as the challenges that lay ahead regarding advancing microwave technology to ensure that future NASA missions are not constrained by lack of communication or navigation capabilities. The presentation closes with some examples of emerging ongoing opportunities for establishing collaborative efforts between NASA, Industry, and Academia to encourage the development, demonstration and insertion of communications technology in pertinent aerospace systems.

  13. Development of a Dynamically Configurable,Object-Oriented Framework for Distributed, Multi-modal Computational Aerospace Systems Simulation

    NASA Technical Reports Server (NTRS)

    Afjeh, Abdollah A.; Reed, John A.

    2003-01-01

    This research is aimed at developing a neiv and advanced simulation framework that will significantly improve the overall efficiency of aerospace systems design and development. This objective will be accomplished through an innovative integration of object-oriented and Web-based technologies ivith both new and proven simulation methodologies. The basic approach involves Ihree major areas of research: Aerospace system and component representation using a hierarchical object-oriented component model which enables the use of multimodels and enforces component interoperability. Collaborative software environment that streamlines the process of developing, sharing and integrating aerospace design and analysis models. . Development of a distributed infrastructure which enables Web-based exchange of models to simplify the collaborative design process, and to support computationally intensive aerospace design and analysis processes. Research for the first year dealt with the design of the basic architecture and supporting infrastructure, an initial implementation of that design, and a demonstration of its application to an example aircraft engine system simulation.

  14. Computational simulation for concurrent engineering of aerospace propulsion systems

    NASA Technical Reports Server (NTRS)

    Chamis, C. C.; Singhal, S. N.

    1993-01-01

    Results are summarized for an investigation to assess the infrastructure available and the technology readiness in order to develop computational simulation methods/software for concurrent engineering. These results demonstrate that development of computational simulation methods for concurrent engineering is timely. Extensive infrastructure, in terms of multi-discipline simulation, component-specific simulation, system simulators, fabrication process simulation, and simulation of uncertainties--fundamental to develop such methods, is available. An approach is recommended which can be used to develop computational simulation methods for concurrent engineering of propulsion systems and systems in general. Benefits and issues needing early attention in the development are outlined.

  15. Computational simulation of concurrent engineering for aerospace propulsion systems

    NASA Technical Reports Server (NTRS)

    Chamis, C. C.; Singhal, S. N.

    1992-01-01

    Results are summarized of an investigation to assess the infrastructure available and the technology readiness in order to develop computational simulation methods/software for concurrent engineering. These results demonstrate that development of computational simulations methods for concurrent engineering is timely. Extensive infrastructure, in terms of multi-discipline simulation, component-specific simulation, system simulators, fabrication process simulation, and simulation of uncertainties - fundamental in developing such methods, is available. An approach is recommended which can be used to develop computational simulation methods for concurrent engineering for propulsion systems and systems in general. Benefits and facets needing early attention in the development are outlined.

  16. NAVSTAR Global Positioning System. (Latest citations from the Aerospace Database)

    NASA Technical Reports Server (NTRS)

    1998-01-01

    The bibliography contains citations concerning the global system of navigation satellites developed to provide immediate and accurate worldwide three-dimensional positioning by air, land, and sea vehicles equipped with appropriate receiving equipment. Technological forecasting, reliability, performance tests, and evaluations are discussed. Developments and applications of the NAVSTAR system are included.(Contains 50-250 citations and includes a subject term index and title list.)

  17. NAVSTAR Global Positioning System. (Latest citations from the Aerospace Database)

    NASA Technical Reports Server (NTRS)

    1996-01-01

    The bibliography contains citations concerning the global system of navigation satellites developed to provide immediate and accurate worldwide three-dimensional positioning by air, land, and sea vehicles equipped with appropriate receiving equipment. Technological forecasting, reliability, performance tests, and evaluations are discussed. Developments and applications of the NAVSTAR system are included. (Contains 50-250 citations and includes a subject term index and title list.)

  18. An Object Oriented Extensible Architecture for Affordable Aerospace Propulsion Systems

    NASA Technical Reports Server (NTRS)

    Follen, Gregory J.; Lytle, John K. (Technical Monitor)

    2002-01-01

    Driven by a need to explore and develop propulsion systems that exceeded current computing capabilities, NASA Glenn embarked on a novel strategy leading to the development of an architecture that enables propulsion simulations never thought possible before. Full engine 3 Dimensional Computational Fluid Dynamic propulsion system simulations were deemed impossible due to the impracticality of the hardware and software computing systems required. However, with a software paradigm shift and an embracing of parallel and distributed processing, an architecture was designed to meet the needs of future propulsion system modeling. The author suggests that the architecture designed at the NASA Glenn Research Center for propulsion system modeling has potential for impacting the direction of development of affordable weapons systems currently under consideration by the Applied Vehicle Technology Panel (AVT). This paper discusses the salient features of the NPSS Architecture including its interface layer, object layer, implementation for accessing legacy codes, numerical zooming infrastructure and its computing layer. The computing layer focuses on the use and deployment of these propulsion simulations on parallel and distributed computing platforms which has been the focus of NASA Ames. Additional features of the object oriented architecture that support MultiDisciplinary (MD) Coupling, computer aided design (CAD) access and MD coupling objects will be discussed. Included will be a discussion of the successes, challenges and benefits of implementing this architecture.

  19. Advanced instrumentation for next-generation aerospace propulsion control systems

    NASA Technical Reports Server (NTRS)

    Barkhoudarian, S.; Cross, G. S.; Lorenzo, Carl F.

    1993-01-01

    New control concepts for the next generation of advanced air-breathing and rocket engines and hypersonic combined-cycle propulsion systems are analyzed. The analysis provides a database on the instrumentation technologies for advanced control systems and cross matches the available technologies for each type of engine to the control needs and applications of the other two types of engines. Measurement technologies that are considered to be ready for implementation include optical surface temperature sensors, an isotope wear detector, a brushless torquemeter, a fiberoptic deflectometer, an optical absorption leak detector, the nonintrusive speed sensor, and an ultrasonic triducer. It is concluded that all 30 advanced instrumentation technologies considered can be recommended for further development to meet need of the next generation of jet-, rocket-, and hypersonic-engine control systems.

  20. Simulation of a Flywheel Electrical System for Aerospace Applications

    NASA Technical Reports Server (NTRS)

    Truong, Long V.; Wolff, Frederick J.; Dravid, Narayan V.

    2000-01-01

    A Flywheel Energy Storage Demonstration Project was initiated at the NASA Glenn Research Center as a possible replacement for the battery energy storage system on the International Space Station (ISS). While the hardware fabrication work was being performed at a university and contractor's facility, the related simulation activity was begun at Glenn. At the top level, Glenn researchers simulated the operation of the ISS primary electrical system (as described in another paper) with the Flywheel Energy Storage Unit (FESU) replacing one Battery Charge and Discharge Unit (BCDU). The FESU consists of a Permanent Magnet Synchronous Motor/Generator (PMSM), which is connected to the flywheel; the power electronics that connects the PMSM to the ISS direct-current bus; and the associated controller. The PMSM model is still under development, but this paper describes the rest of the FESU model-the simulation of the converter and the associated control system that regulates energy transfer to and from the flywheel.

  1. An innovative bifocal metrology system for aerospace applications

    NASA Astrophysics Data System (ADS)

    Bresciani, F.

    2016-11-01

    In this paper an innovative space metrology system which objective is to measure the mutual arrangement between two spacecrafts is descripted. It is a simple and robust system that makes possible relative attitude measurements between 2 satellites in formation flying with coarse and fine accuracies. Generally, in formation flying mission it's necessary to have a satellite attitude control whose accuracy depends on their relative distance. The proposed metrology is based on an innovative optical projective system embedded on satellite 1 and a target composed by several light sources mounted on satellite 2. Optical system concurrently projects on a CCD two images of the target and from relative position of the light sources on the CCD image plane it's possible to detect position and attitude of the S2. Basic element of innovation of this versatile metrology concept is the possibility to work on a very large S/Cs range distance (~10 m-15 km) and to determinate the relative attitude and position of two spacecrafts on all six degree of freedom in a very simple and fast way.

  2. Experimental Modal Analysis and Dynaic Strain Fiber Bragg Gratings for Structural Health Monitoring of Composite Aerospace Structures

    NASA Astrophysics Data System (ADS)

    Panopoulou, A.; Fransen, S.; Gomez Molinero, V.; Kostopoulos, V.

    2012-07-01

    The objective of this work is to develop a new structural health monitoring system for composite aerospace structures based on dynamic response strain measurements and experimental modal analysis techniques. Fibre Bragg Grating (FBG) optical sensors were used for monitoring the dynamic response of the composite structure. The structural dynamic behaviour has been numerically simulated and experimentally verified by means of vibration testing. The hypothesis of all vibration tests was that actual damage in composites reduces their stiffness and produces the same result as mass increase produces. Thus, damage was simulated by slightly varying locally the mass of the structure at different zones. Experimental modal analysis based on the strain responses was conducted and the extracted strain mode shapes were the input for the damage detection expert system. A feed-forward back propagation neural network was the core of the damage detection system. The features-input to the neural network consisted of the strain mode shapes, extracted from the experimental modal analysis. Dedicated training and validation activities were carried out based on the experimental results. The system showed high reliability, confirmed by the ability of the neural network to recognize the size and the position of damage on the structure. The experiments were performed on a real structure i.e. a lightweight antenna sub- reflector, manufactured and tested at EADS CASA ESPACIO. An integrated FBG sensor network, based on the advantage of multiplexing, was mounted on the structure with optimum topology. Numerical simulation of both structures was used as a support tool at all the steps of the work. Potential applications for the proposed system are during ground qualification extensive tests of space structures and during the mission as modal analysis tool on board, being able via the FBG responses to identify a potential failure.

  3. Multidisciplinary Aerospace Systems Optimization: Computational AeroSciences (CAS) Project

    NASA Technical Reports Server (NTRS)

    Kodiyalam, S.; Sobieski, Jaroslaw S. (Technical Monitor)

    2001-01-01

    The report describes a method for performing optimization of a system whose analysis is so expensive that it is impractical to let the optimization code invoke it directly because excessive computational cost and elapsed time might result. In such situation it is imperative to have user control the number of times the analysis is invoked. The reported method achieves that by two techniques in the Design of Experiment category: a uniform dispersal of the trial design points over a n-dimensional hypersphere and a response surface fitting, and the technique of krigging. Analyses of all the trial designs whose number may be set by the user are performed before activation of the optimization code and the results are stored as a data base. That code is then executed and referred to the above data base. Two applications, one of the airborne laser system, and one of an aircraft optimization illustrate the method application.

  4. Neurophysiological Estimates of Human Performance Capabilities in Aerospace Systems

    DTIC Science & Technology

    1976-11-30

    different nights. These stages correspond descriptively to light , medium, deep, sleep and the dream state. Upon awakening, the subjects performed a series of...of usual in terms of the nervous systems response to the light -dark cycle and who are alert at night for those operations which require skill and judge...some strik- ing exceptions, mankind is tied to the light -dark cycle - rising with the onset of light and retiring for nocturnal sleep in the hours of

  5. Generalized Predictive and Neural Generalized Predictive Control of Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Kelkar, Atul G.

    2000-01-01

    The research work presented in this thesis addresses the problem of robust control of uncertain linear and nonlinear systems using Neural network-based Generalized Predictive Control (NGPC) methodology. A brief overview of predictive control and its comparison with Linear Quadratic (LQ) control is given to emphasize advantages and drawbacks of predictive control methods. It is shown that the Generalized Predictive Control (GPC) methodology overcomes the drawbacks associated with traditional LQ control as well as conventional predictive control methods. It is shown that in spite of the model-based nature of GPC it has good robustness properties being special case of receding horizon control. The conditions for choosing tuning parameters for GPC to ensure closed-loop stability are derived. A neural network-based GPC architecture is proposed for the control of linear and nonlinear uncertain systems. A methodology to account for parametric uncertainty in the system is proposed using on-line training capability of multi-layer neural network. Several simulation examples and results from real-time experiments are given to demonstrate the effectiveness of the proposed methodology.

  6. Modeling of Unilateral Contact Conditions in Aerospace Systems

    DTIC Science & Technology

    2005-12-31

    Therefore, for large systems with LuGre friction, the pp. 100-103. Radau -IIA method appears to be the best method for numerical Kokotovic, P ., Khalil, H., and...radius of the outer race is denoted p . In the deformed configuration, body K undergoes a displacement uk and its orientation is defined by an orthonormal... P , _ I11• +-RI. (2) The virtual work done by the normal contact force is 6W = fnTj(zk _- Z) = fnf1Tj(uk - uk) = fnfq, where ff is the magnitude of

  7. Feasibility study of an Integrated Program for Aerospace vehicle Design (IPAD). Volume 4: IPAD system design

    NASA Technical Reports Server (NTRS)

    Goldfarb, W.; Carpenter, L. C.; Redhed, D. D.; Hansen, S. D.; Anderson, L. O.; Kawaguchi, A. S.

    1973-01-01

    The computing system design of IPAD is described and the requirements which form the basis for the system design are discussed. The system is presented in terms of a functional design description and technical design specifications. The functional design specifications give the detailed description of the system design using top-down structured programming methodology. Human behavioral characteristics, which specify the system design at the user interface, security considerations, and standards for system design, implementation, and maintenance are also part of the technical design specifications. Detailed specifications of the two most common computing system types in use by the major aerospace companies which could support the IPAD system design are presented. The report of a study to investigate migration of IPAD software between the two candidate 3rd generation host computing systems and from these systems to a 4th generation system is included.

  8. Multi-agent systems design for aerospace applications

    NASA Astrophysics Data System (ADS)

    Waslander, Steven L.

    2007-12-01

    Engineering systems with independent decision makers are becoming increasingly prevalent and present many challenges in coordinating actions to achieve systems goals. In particular, this work investigates the applications of air traffic flow control and autonomous vehicles as motivation to define algorithms that allow agents to agree to safe, efficient and equitable solutions in a distributed manner. To ensure system requirements will be satisfied in practice, each method is evaluated for a specific model of agent behavior, be it cooperative or non-cooperative. The air traffic flow control problem is investigated from the point of view of the airlines, whose costs are directly affected by resource allocation decisions made by the Federal Aviation Administration in order to mitigate traffic disruptions caused by weather. Airlines are first modeled as cooperative, and a distributed algorithm is presented with various global cost metrics which balance efficient and equitable use of resources differently. Next, a competitive airline model is assumed and two market mechanisms are developed for allocating contested airspace resources. The resource market mechanism provides a solution for which convergence to an efficient solution can be guaranteed, and each airline will improve on the solution that would occur without its inclusion in the decision process. A lump-sum market is then introduced as an alternative mechanism, for which efficiency loss bounds exist if airlines attempt to manipulate prices. Initial convergence results for lump-sum markets are presented for simplified problems with a single resource. To validate these algorithms, two air traffic flow models are developed which extend previous techniques, the first a convenient convex model made possible by assuming constant velocity flow, and the second a more complex flow model with full inflow, velocity and rerouting control. Autonomous vehicle teams are envisaged for many applications including mobile sensing

  9. Brain cancer mortality at a manufacturer of aerospace electromechanical systems.

    PubMed

    Park, R M; Silverstein, M A; Green, M A; Mirer, F E

    1990-01-01

    Standardized proportional mortality ratios and mortality odds ratios were calculated for 583 deaths between 1950 and 1986 among employees who had worked for at least 10 years at a facility manufacturing missile and aircraft guidance systems. There was a statistically significant excess of brain cancer proportional mortality (PMR = 16/3.8 = 4.2, p = .0001). Among hourly employees, 12 brain cancer deaths occurred for 2.7 expected (PMR = 4.4, p = .00005). The PMR for brain cancer increased from 1.8 (p = .45) among hourly workers with less than 20 years to 8.7 (p = .000003) in those with more than 20 years employment. Work in "clean rooms," where gyroscopes were assembled, was associated with the brain cancer excess but did not fully account for it. Among 105 deceased hourly women, all three brain cancer deaths occurred among gyro assemblers working in clean rooms, and the risk increased with duration in clean rooms. Although the proportion of brain cancer deaths among hourly men with clean-room experience was similar to that for women, only three of the seven male brain cancer deaths occurred in this group. The suspect agents include gyro fluids and chlorofluorocarbon solvents.

  10. The very large airplane: safety, health, and comfort considerations. Air Transport Medicine Committee, Aerospace Medical Association.

    PubMed

    1997-10-01

    In recent years, aircraft manufacturers have been considering a very large airplane with a capacity of 600-1000 passengers. The human factors aspects of such an unprecedented enterprise demand that the aerospace medicine community take an active role early on in the design phase. Consequently, the Aerospace Medical Association formed an international task force to prepare a paper containing pertinent human factors recommendations for the manufacturers. This paper, including the recommendations herein, has been forwarded to Boeing and Airbus as well as to 50 major airlines of the world.

  11. An Integrated MEMS Sensor Cluster System for Aerospace Applications

    NASA Technical Reports Server (NTRS)

    Kahng, Seun; Scott, Michael A.; Beeler, George B.; Bartlett, James E.; Collins, Richard S.

    2000-01-01

    Efforts to reduce viscous drag on airfoils could results in a considerable saving for the operation of flight vehicles including those of space transportation. This reduction of viscous drag effort requires measurement and active control of boundary layer flow property on an airfoil. Measurement of viscous drag of the boundary layer flow over an airfoil with minimal flow disturbance is achievable with newly developed MEMS sensor clusters. These sensor clusters provide information that can be used to actively control actuators to obtain desired flow properties or design a vehicle to satisfy particular boundary layer flow criteria. A series of MEMS sensor clusters has been developed with a data acquisition and control module for local measurements of shear stress, pressure, and temperature on an airfoil. The sensor cluster consists of two shear stress sensors, two pressure sensors, and two temperature sensors on a surface area of 1.24 mm x 1.86 mm. Each sensor is 300 microns square and is placed on a flexible polyimide sheet. The shear stress sensor is a polysilicon hot-film resistor, which is insulated by a vacuum cavity of 200 x 200 x 2 microns. The pressure sensors are silicon piezoresistive type, and the temperature sensors are also hot film polysilicon resistors. The total size of the cluster including sensors and electrical leads is 1 Omm x 1 Omm x 0.1 mm. A typical sensitivity of shear stress sensor is 150 mV/Pascal, the pressure sensors are an absolute type with a measurement range from 9 to 36 psia with 0.8mV/V/psi sensitivity, and the temperature sensors have a measurement resolution of 0.1 degree C. The sensor clusters are interfaced to a data acquisition and control module that consists of two custom ASICs (Application Specific Integrated Circuits) and a micro-controller. The data acquisition and control module transfers data to a host PC that configures and controls a total of three sensor clusters. Functionality of the entire system has been tested in

  12. Portable Health Algorithms Test System

    NASA Technical Reports Server (NTRS)

    Melcher, Kevin J.; Wong, Edmond; Fulton, Christopher E.; Sowers, Thomas S.; Maul, William A.

    2010-01-01

    A document discusses the Portable Health Algorithms Test (PHALT) System, which has been designed as a means for evolving the maturity and credibility of algorithms developed to assess the health of aerospace systems. Comprising an integrated hardware-software environment, the PHALT system allows systems health management algorithms to be developed in a graphical programming environment, to be tested and refined using system simulation or test data playback, and to be evaluated in a real-time hardware-in-the-loop mode with a live test article. The integrated hardware and software development environment provides a seamless transition from algorithm development to real-time implementation. The portability of the hardware makes it quick and easy to transport between test facilities. This hard ware/software architecture is flexible enough to support a variety of diagnostic applications and test hardware, and the GUI-based rapid prototyping capability is sufficient to support development execution, and testing of custom diagnostic algorithms. The PHALT operating system supports execution of diagnostic algorithms under real-time constraints. PHALT can perform real-time capture and playback of test rig data with the ability to augment/ modify the data stream (e.g. inject simulated faults). It performs algorithm testing using a variety of data input sources, including real-time data acquisition, test data playback, and system simulations, and also provides system feedback to evaluate closed-loop diagnostic response and mitigation control.

  13. Integrated Component-based Data Acquisition Systems for Aerospace Test Facilities

    NASA Technical Reports Server (NTRS)

    Ross, Richard W.

    2001-01-01

    The Multi-Instrument Integrated Data Acquisition System (MIIDAS), developed by the NASA Langley Research Center, uses commercial off the shelf (COTS) products, integrated with custom software, to provide a broad range of capabilities at a low cost throughout the system s entire life cycle. MIIDAS combines data acquisition capabilities with online and post-test data reduction computations. COTS products lower purchase and maintenance costs by reducing the level of effort required to meet system requirements. Object-oriented methods are used to enhance modularity, encourage reusability, and to promote adaptability, reducing software development costs. Using only COTS products and custom software supported on multiple platforms reduces the cost of porting the system to other platforms. The post-test data reduction capabilities of MIIDAS have been installed at four aerospace testing facilities at NASA Langley Research Center. The systems installed at these facilities provide a common user interface, reducing the training time required for personnel that work across multiple facilities. The techniques employed by MIIDAS enable NASA to build a system with a lower initial purchase price and reduced sustaining maintenance costs. With MIIDAS, NASA has built a highly flexible next generation data acquisition and reduction system for aerospace test facilities that meets customer expectations.

  14. Aerospace - Aviation Education.

    ERIC Educational Resources Information Center

    Martin, Arthur I.; Jones, K. K.

    This document outlines the aerospace-aviation education program of the State of Texas. In this publication the course structures have been revised to fit the quarter system format of secondary schools in Texas. The four courses outlined here have been designed for students who will be consumers of aerospace products, spinoffs, and services or who…

  15. AVID - A design system for technology studies of advanced transportation concepts. [Aerospace Vehicle Interactive Design

    NASA Technical Reports Server (NTRS)

    Wilhite, A. W.; Rehder, J. J.

    1979-01-01

    The basic AVID (Aerospace Vehicle Interactive Design) is a general system for conceptual and preliminary design currently being applied to a broad range of future space transportation and spacecraft vehicle concepts. AVID hardware includes a minicomputer allowing rapid designer interaction. AVID software includes (1) an executive program and communication data base which provide the automated capability to couple individual programs, either individually in an interactive mode or chained together in an automatic sequence mode; and (2) the individual technology and utility programs which provide analysis capability in areas such as graphics, aerodynamics, propulsion, flight performance, weights, sizing, and costs.

  16. Development of the supply chain oriented quality assurance system for aerospace manufacturing SMEs and its implementation perspectives

    NASA Astrophysics Data System (ADS)

    Hussein, Abdullahi; Cheng, Kai

    2016-10-01

    Aerospace manufacturing SMEs are continuously facing the challenge on managing their supply chain and complying with the aerospace manufacturing quality standard requirement due to their lack of resources and the nature of business. In this paper, the ERP system based approach is presented to quality control and assurance work in light of seamless integration of in-process production data and information internally and therefore managing suppliers more effectively and efficiently. The Aerospace Manufacturing Quality Assurance Standard (BS/EN9100) is one of the most recognised and essential protocols for developing the industry-operated-and-driven quality assurance systems. The research investigates using the ERP based system as an enabler to implement BS/EN9100 quality management system at manufacturing SMEs and the associated implementation and application perspectives. An application case study on a manufacturing SME is presented by using the SAP based implementation, which helps further evaluate and validate the approach and application system development.

  17. A methodology for model-based development and automated verification of software for aerospace systems

    NASA Astrophysics Data System (ADS)

    Martin, L.; Schatalov, M.; Hagner, M.; Goltz, U.; Maibaum, O.

    Today's software for aerospace systems typically is very complex. This is due to the increasing number of features as well as the high demand for safety, reliability, and quality. This complexity also leads to significant higher software development costs. To handle the software complexity, a structured development process is necessary. Additionally, compliance with relevant standards for quality assurance is a mandatory concern. To assure high software quality, techniques for verification are necessary. Besides traditional techniques like testing, automated verification techniques like model checking become more popular. The latter examine the whole state space and, consequently, result in a full test coverage. Nevertheless, despite the obvious advantages, this technique is rarely yet used for the development of aerospace systems. In this paper, we propose a tool-supported methodology for the development and formal verification of safety-critical software in the aerospace domain. The methodology relies on the V-Model and defines a comprehensive work flow for model-based software development as well as automated verification in compliance to the European standard series ECSS-E-ST-40C. Furthermore, our methodology supports the generation and deployment of code. For tool support we use the tool SCADE Suite (Esterel Technology), an integrated design environment that covers all the requirements for our methodology. The SCADE Suite is well established in avionics and defense, rail transportation, energy and heavy equipment industries. For evaluation purposes, we apply our approach to an up-to-date case study of the TET-1 satellite bus. In particular, the attitude and orbit control software is considered. The behavioral models for the subsystem are developed, formally verified, and optimized.

  18. EASCON '81; Electronics and Aerospace Systems Conventions, Washington, DC, November 16-19, 1981, Record

    NASA Astrophysics Data System (ADS)

    Various aspects of electronics and aerospace systems are discussed. The topics include sonar technology, earth exploration satellites, satellite/CATV interconnections, digital satellite systems technology, tactical radar, GaAs circuit development and memory, integrated voice/data communications systems, satellite communications services, sonar systems, enhanced non-video cable services, advanced spacecraft control techniques, near-term plans for government information systems, space platforms and launch vehicles, small microwave radars, satellite security and accessibility, IR detector technology, local area networks, satellite navigation, millimeter wave radar, teletex, advanced communications technology, communications applications of integrated satellite and terrestrial networks, direct broadcast satellite systems, passive acoustic tracking technology, signal processing techniques, and multimedia electronic message communications.

  19. Lubrication System Failure Baseline Testing on an Aerospace Quality Gear Mesh

    NASA Technical Reports Server (NTRS)

    Handschuh, Robert F.; Morales, Wilfredo

    2000-01-01

    Aerospace drive systems are required to survive a loss-of-lubrication test for qualification. In many cases emergency lubrication systems need to be designed and utilized to permit the drive system to pass this difficult requirement. The weight of emergency systems can adversely affect the mission capabilities of the aircraft. The possibility to reduce the emergency system weight through the use of mist lubrication will be described. Mist lubrication involves the delivery of a minute amount of an organic liquid as a vapor or fine mist in flowing compressed air to rubbing surfaces. At the rubbing surface, the vapor or mist reacts to form a solid lubricating film. The aim of this study was to establish a baseline for gear behavior under oil depleted conditions. A reactive vapor-mist lubrication method is described and proposed as a candidate emergency lubrication system.

  20. RASC-AL (Revolutionary Aerospace Systems Concepts-Academic Linkage): 2002 Advanced Concept Design Presentation

    NASA Technical Reports Server (NTRS)

    2002-01-01

    The Revolutionary Aerospace Systems Concepts-Academic Linkage (RASC-AL) is a program of the Lunar and Planetary Institute (LPI) in collaboration with the Universities Space Research Association's (USRA) ICASE institute through the NASA Langley Research Center. The RASC-AL key objectives are to develop relationships between universities and NASA that lead to opportunities for future NASA research and programs, and to develop aerospace systems concepts and technology requirements to enable future NASA missions. The program seeks to look decades into the future to explore new mission capabilities and discover what's possible. NASA seeks concepts and technologies that can make it possible to go anywhere, at anytime, safely, reliably, and affordably to accomplish strategic goals for science, exploration, and commercialization. University teams were invited to submit research topics from the following themes: Human and Robotic Space Exploration, Orbital Aggregation & Space Infrastructure Systems (OASIS), Zero-Emissions Aircraft, and Remote Sensing. RASC-AL is an outgrowth of the HEDS-UP (University Partners) Program sponsored by the LPI. HEDS-UP was a program of the Lunar and Planetary Institute designed to link universities with NASA's Human Exploration and Development of Space (HEDS) enterprise. The first RASC-AL Forum was held November 5-8, 2002, at the Hilton Cocoa Beach Oceanfront Hotel in Cocoa Beach, Florida. Representatives from 10 university teams presented student research design projects at this year's Forum. Each team contributed a written report and these reports are presented.

  1. Application of first principle nickel system battery models to aerospace situations

    SciTech Connect

    Stefano, S. Di; Timmerman, P.; Ratnakumar, B.V.

    1995-12-31

    Battery models based on first principles have been under development for the last five to ten years. More recently, the appearance of faster and more sophisticated computational techniques, has allowed significant advances in the field. The usual approach consists of selecting the critical physicochemical phenomena of the given system (chemistry, mass transfer, charge transfer, etc.), setting up the problem as a set of coupled differential equations and obtaining numerical solutions. This approach was successfully implemented for the Pb-Acid system and subsequently for the NiCd system, at the cell level, by Prof. Ralph White of Texas A and M University. This NiCd cell model served as the basis of the NiCd Aerospace Battery model developed at JPL and reported at previous IECEC meetings. At this time several aerospace battery models using the same approach are under development at JPL. The recent models are based on NiH2 and NiMH chemistries. The current set of models uses a simplified treatment of the electrodes, this treatment assumes planar (non porous) electrode geometry. The resulting models have very modest computational requirements, allowing them to operate on personal computers. Results of performance predictions and computational requirements for the new models are discussed.

  2. Advanced model-based FDIR techniques for aerospace systems: Today challenges and opportunities

    NASA Astrophysics Data System (ADS)

    Zolghadri, Ali

    2012-08-01

    This paper discusses some trends and recent advances in model-based Fault Detection, Isolation and Recovery (FDIR) for aerospace systems. The FDIR challenges range from pre-design and design stages for upcoming and new programs, to improvement of the performance of in-service flying systems. For space missions, optimization of flight conditions and safe operation is intrinsically related to GNC (Guidance, Navigation & Control) system of the spacecraft and includes sensors and actuators monitoring. Many future space missions will require autonomous proximity operations including fault diagnosis and the subsequent control and guidance recovery actions. For upcoming and future aircraft, one of the main issues is how early and robust diagnosis of some small and subtle faults could contribute to the overall optimization of aircraft design. This issue would be an important factor for anticipating the more and more stringent requirements which would come in force for future environmentally-friendlier programs. The paper underlines the reasons for a widening gap between the advanced scientific FDIR methods being developed by the academic community and technological solutions demanded by the aerospace industry.

  3. Job-mix modeling and system analysis of an aerospace multiprocessor.

    NASA Technical Reports Server (NTRS)

    Mallach, E. G.

    1972-01-01

    An aerospace guidance computer organization, consisting of multiple processors and memory units attached to a central time-multiplexed data bus, is described. A job mix for this type of computer is obtained by analysis of Apollo mission programs. Multiprocessor performance is then analyzed using: 1) queuing theory, under certain 'limiting case' assumptions; 2) Markov process methods; and 3) system simulation. Results of the analyses indicate: 1) Markov process analysis is a useful and efficient predictor of simulation results; 2) efficient job execution is not seriously impaired even when the system is so overloaded that new jobs are inordinately delayed in starting; 3) job scheduling is significant in determining system performance; and 4) a system having many slow processors may or may not perform better than a system of equal power having few fast processors, but will not perform significantly worse.

  4. Complex multidisciplinary systems decomposition for aerospace vehicle conceptual design and technology acquisition

    NASA Astrophysics Data System (ADS)

    Omoragbon, Amen

    Although, the Aerospace and Defense (A&D) industry is a significant contributor to the United States' economy, national prestige and national security, it experiences significant cost and schedule overruns. This problem is related to the differences between technology acquisition assessments and aerospace vehicle conceptual design. Acquisition assessments evaluate broad sets of alternatives with mostly qualitative techniques, while conceptual design tools evaluate narrow set of alternatives with multidisciplinary tools. In order for these two fields to communicate effectively, a common platform for both concerns is desired. This research is an original contribution to a three-part solution to this problem. It discusses the decomposition step of an innovation technology and sizing tool generation framework. It identifies complex multidisciplinary system definitions as a bridge between acquisition and conceptual design. It establishes complex multidisciplinary building blocks that can be used to build synthesis systems as well as technology portfolios. It also describes a Graphical User Interface Designed to aid in decomposition process. Finally, it demonstrates an application of the methodology to a relevant acquisition and conceptual design problem posed by the US Air Force.

  5. The Evaluation and Implementation of a Water Containment System to Support Aerospace Flywheel Testing

    NASA Technical Reports Server (NTRS)

    Trase, Larry M.

    2002-01-01

    High-energy flywheel systems for aerospace power storage and attitude control applications are being developed because of the potential for increasing the energy density and reducing operational costs. A significant challenge facing the development of the test hardware is containment of the rotating elements in the event of a failure during the development and qualification stages of testing. This containment is critical in order to ensure the safety of the test personnel and the facility. A containment system utilizing water as the containment media is presented. Water containment was found to be a low cost, flexible, and highly effective containment system. Ballistic test results and analytical results are discussed along with a description of a flywheel test facility that was designed and built utilizing the water containment system at the NASA Glenn Research Center at Lewis Field in Cleveland, Ohio.

  6. Minimizing thermal damage of aerospace components using coolant nozzle and coolant system optimization

    SciTech Connect

    Mindek, R.B. Jr.; Webster, J.A.

    1994-12-31

    Research to optimize the application of coolant in the creep feed grinding of aerospace components was conducted at the Center for Grinding Research and Development during the past year. During this research, work was performed in the areas of coolant jet nozzle and coolant system design to identify optimum jet nozzle designs, nozzle positioning and coolant system configurations. The knowledge gained from initial screening tests and grinding trials of flat surfaces was applied to final grinding trials on actual blade and vane (profiled) production components. Final grinding test results of four specific production operations showed that at least a 27% improvement in wheel life could be realized, relative to the levels previously established in production, by optimizing grinding fluid application. In addition, a set of guidelines for optimized coolant nozzle and coolant system design and manufacture have been developed from the results of this research, and are applicable to other types of grinding or machining as well.

  7. Modelling and experimental verification of a water alleviation system for the NASP. [National Aerospace Plane

    NASA Technical Reports Server (NTRS)

    Vanfossen, G. James

    1992-01-01

    One possible low speed propulsion system for the National Aerospace Plane is a liquid air cycle engine (LACE). The LACE system uses the heat sink in the liquid hydrogen propellant to liquefy air in a heat exchanger which is then pumped up to high pressure and used as the oxidizer in a hydrogen liquid air rocket. The inlet airstream must be dehumidified or moisture could freeze on the cryogenic heat exchangers and block them. The main objective of this research has been to develop a computer simulation of the cold tube/antifreeze-spray water alleviation system and to verify the model with experimental data. An experimental facility has been built and humid air tests were conducted on a generic heat exchanger to obtain condensing data for code development. The paper describes the experimental setup, outlines the method of calculation used in the code, and presents comparisons of the calculations and measurements. Cause of discrepancies between the model and data are explained.

  8. Recent advances in AM OLED technologies for application to aerospace and military systems

    NASA Astrophysics Data System (ADS)

    Sarma, Kalluri R.; Roush, Jerry; Chanley, Charles

    2012-06-01

    While initial AM OLED products have been introduced in the market about a decade ago, truly successful commercialization of OLEDs has started only a couple of years ago, by Samsung Mobile Display (SMD), with small high performance displays for smart phone applications. This success by Samsung has catalyzed significant interest in AM OLED technology advancement and commercialization by other display manufacturers. Currently, significant manufacturing capacity for AM OLED displays is being established by the industry to serve the growing demand for these displays. The current development in the AM OLED industry are now focused on the development and commercialization of medium size (~10") AM OLED panels for Tablet PC applications and large size (~55") panels for TV applications. This significant progress in commercialization of AM OLED technology is enabled by major advances in various enabling technologies that include TFT backplanes, OLED materials and device structures and manufacturing know-how. In this paper we will discuss these recent advances, particularly as they relate to supporting high performance applications such as aerospace and military systems, and then discuss the results of the OLED testing for aerospace applications.

  9. A Conceptual Aerospace Vehicle Structural System Modeling, Analysis and Design Process

    NASA Technical Reports Server (NTRS)

    Mukhopadhyay, Vivek

    2007-01-01

    A process for aerospace structural concept analysis and design is presented, with examples of a blended-wing-body fuselage, a multi-bubble fuselage concept, a notional crew exploration vehicle, and a high altitude long endurance aircraft. Aerospace vehicle structures must withstand all anticipated mission loads, yet must be designed to have optimal structural weight with the required safety margins. For a viable systems study of advanced concepts, these conflicting requirements must be imposed and analyzed early in the conceptual design cycle, preferably with a high degree of fidelity. In this design process, integrated multidisciplinary analysis tools are used in a collaborative engineering environment. First, parametric solid and surface models including the internal structural layout are developed for detailed finite element analyses. Multiple design scenarios are generated for analyzing several structural configurations and material alternatives. The structural stress, deflection, strain, and margins of safety distributions are visualized and the design is improved. Over several design cycles, the refined vehicle parts and assembly models are generated. The accumulated design data is used for the structural mass comparison and concept ranking. The present application focus on the blended-wing-body vehicle structure and advanced composite material are also discussed.

  10. Development of a Dynamically Configurable, Object-Oriented Framework for Distributed, Multi-modal Computational Aerospace Systems Simulation

    NASA Technical Reports Server (NTRS)

    Afjeh, Abdollah A.; Reed, John A.

    2003-01-01

    The following reports are presented on this project:A first year progress report on: Development of a Dynamically Configurable,Object-Oriented Framework for Distributed, Multi-modal Computational Aerospace Systems Simulation; A second year progress report on: Development of a Dynamically Configurable, Object-Oriented Framework for Distributed, Multi-modal Computational Aerospace Systems Simulation; An Extensible, Interchangeable and Sharable Database Model for Improving Multidisciplinary Aircraft Design; Interactive, Secure Web-enabled Aircraft Engine Simulation Using XML Databinding Integration; and Improving the Aircraft Design Process Using Web-based Modeling and Simulation.

  11. Structural Analysis Methods for Structural Health Management of Future Aerospace Vehicles

    NASA Technical Reports Server (NTRS)

    Tessler, Alexander

    2007-01-01

    Two finite element based computational methods, Smoothing Element Analysis (SEA) and the inverse Finite Element Method (iFEM), are reviewed, and examples of their use for structural health monitoring are discussed. Due to their versatility, robustness, and computational efficiency, the methods are well suited for real-time structural health monitoring of future space vehicles, large space structures, and habitats. The methods may be effectively employed to enable real-time processing of sensing information, specifically for identifying three-dimensional deformed structural shapes as well as the internal loads. In addition, they may be used in conjunction with evolutionary algorithms to design optimally distributed sensors. These computational tools have demonstrated substantial promise for utilization in future Structural Health Management (SHM) systems.

  12. Emerging Needs for Pervasive Passive Wireless Sensor Networks on Aerospace Vehicles

    NASA Technical Reports Server (NTRS)

    Wilson, William C.; Juarez, Peter D.

    2014-01-01

    NASA is investigating passive wireless sensor technology to reduce instrumentation mass and volume in ground testing, air flight, and space exploration applications. Vehicle health monitoring systems (VHMS) are desired on all aerospace programs to ensure the safety of the crew and the vehicles. Pervasive passive wireless sensor networks facilitate VHMS on aerospace vehicles. Future wireless sensor networks on board aerospace vehicles will be heterogeneous and will require active and passive network systems. Since much has been published on active wireless sensor networks, this work will focus on the need for passive wireless sensor networks on aerospace vehicles. Several passive wireless technologies such as microelectromechanical systems MEMS, SAW, backscatter, and chipless RFID techniques, have all shown potential to meet the pervasive sensing needs for aerospace VHMS applications. A SAW VHMS application will be presented. In addition, application areas including ground testing, hypersonic aircraft and spacecraft will be explored along with some of the harsh environments found in aerospace applications.

  13. Military Aerospace. Aerospace Education II.

    ERIC Educational Resources Information Center

    Smith, J. C.

    This book is a revised publication in the series on Aerospace Education II. It describes the employment of aerospace forces, their methods of operation, and some of the weapons and equipment used in combat and combat support activities. The first chapter describes some of the national objectives and policies served by the Air Force in peace and…

  14. Aerospace Environment. Aerospace Education I.

    ERIC Educational Resources Information Center

    Savler, D. S.; Smith, J. C.

    This book is one in the series on Aerospace Education I. It briefly reviews current knowledge of the universe, the earth and its life-supporting atmosphere, and the arrangement of celestial bodies in outer space and their physical characteristics. Chapter 1 includes a brief survey of the aerospace environment. Chapters 2 and 3 examine the…

  15. Damage Assessment of Aerospace Structural Components by Impedance Based Health Monitoring

    NASA Technical Reports Server (NTRS)

    Gyekenyesi, Andrew L.; Martin, Richard E.; Sawicki, Jerzy T.; Baaklini, George Y.

    2005-01-01

    This paper addresses recent efforts at the NASA Glenn Research Center at Lewis Field relating to the set-up and assessment of electro-mechanical (E/M) impedance based structural health monitoring. The overall aim is the application of the impedance based technique to aeronautic and space based structural components. As initial steps, a laboratory was created, software written, and experiments conducted on aluminum plates in undamaged and damaged states. A simulated crack, in the form of a narrow notch at various locations, was analyzed using piezoelectric-ceramic (PZT: lead, zirconate, titarate) patches as impedance measuring transducers. Descriptions of the impedance quantifying hardware and software are provided as well as experimental results. In summary, an impedance based health monitoring system was assembled and tested. The preliminary data showed that the impedance based technique was successful in recognizing the damage state of notched aluminum plates.

  16. A Model-Based Approach to Engineering Behavior of Complex Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Ingham, Michel; Day, John; Donahue, Kenneth; Kadesch, Alex; Kennedy, Andrew; Khan, Mohammed Omair; Post, Ethan; Standley, Shaun

    2012-01-01

    One of the most challenging yet poorly defined aspects of engineering a complex aerospace system is behavior engineering, including definition, specification, design, implementation, and verification and validation of the system's behaviors. This is especially true for behaviors of highly autonomous and intelligent systems. Behavior engineering is more of an art than a science. As a process it is generally ad-hoc, poorly specified, and inconsistently applied from one project to the next. It uses largely informal representations, and results in system behavior being documented in a wide variety of disparate documents. To address this problem, JPL has undertaken a pilot project to apply its institutional capabilities in Model-Based Systems Engineering to the challenge of specifying complex spacecraft system behavior. This paper describes the results of the work in progress on this project. In particular, we discuss our approach to modeling spacecraft behavior including 1) requirements and design flowdown from system-level to subsystem-level, 2) patterns for behavior decomposition, 3) allocation of behaviors to physical elements in the system, and 4) patterns for capturing V&V activities associated with behavioral requirements. We provide examples of interesting behavior specification patterns, and discuss findings from the pilot project.

  17. An expert system for integrated structural analysis and design optimization for aerospace structures

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The results of a research study on the development of an expert system for integrated structural analysis and design optimization is presented. An Object Representation Language (ORL) was developed first in conjunction with a rule-based system. This ORL/AI shell was then used to develop expert systems to provide assistance with a variety of structural analysis and design optimization tasks, in conjunction with procedural modules for finite element structural analysis and design optimization. The main goal of the research study was to provide expertise, judgment, and reasoning capabilities in the aerospace structural design process. This will allow engineers performing structural analysis and design, even without extensive experience in the field, to develop error-free, efficient and reliable structural designs very rapidly and cost-effectively. This would not only improve the productivity of design engineers and analysts, but also significantly reduce time to completion of structural design. An extensive literature survey in the field of structural analysis, design optimization, artificial intelligence, and database management systems and their application to the structural design process was first performed. A feasibility study was then performed, and the architecture and the conceptual design for the integrated 'intelligent' structural analysis and design optimization software was then developed. An Object Representation Language (ORL), in conjunction with a rule-based system, was then developed using C++. Such an approach would improve the expressiveness for knowledge representation (especially for structural analysis and design applications), provide ability to build very large and practical expert systems, and provide an efficient way for storing knowledge. Functional specifications for the expert systems were then developed. The ORL/AI shell was then used to develop a variety of modules of expert systems for a variety of modeling, finite element analysis, and

  18. The Advantages of Non-Flow-Through Fuel Cell Power Systems for Aerospace Applications

    NASA Technical Reports Server (NTRS)

    Hoberecht, Mark; Burke, Kenneth; Jakupca, Ian

    2011-01-01

    NASA has been developing proton-exchange-membrane (PEM) fuel cell power systems for the past decade, as an upgraded technology to the alkaline fuel cells which presently provide power for the Shuttle Orbiter. All fuel cell power systems consist of one or more fuel cell stacks in combination with appropriate balance-of-plant hardware. Traditional PEM fuel cells are characterized as flow-through, in which recirculating reactant streams remove product water from the fuel cell stack. NASA recently embarked on the development of non-flow-through fuel cell systems, in which reactants are dead-ended into the fuel cell stack and product water is removed by internal wicks. This simplifies the fuel cell power system by eliminating the need for pumps to provide reactant circulation, and mechanical water separators to remove the product water from the recirculating reactant streams. By eliminating these mechanical components, the resulting fuel cell power system has lower mass, volume, and parasitic power requirements, along with higher reliability and longer life. These improved non-flow-through fuel cell power systems therefore offer significant advantages for many aerospace applications.

  19. Ceramic Integration Technologies for Aerospace and Energy Systems: Technical Challenges and Opportunities

    NASA Technical Reports Server (NTRS)

    Singh, Mrityunjay

    2007-01-01

    Ceramic integration technology has been recognized as an enabling technology for the implementation of advanced ceramic systems in a number of high-temperature applications in aerospace, power generation, nuclear, chemical, and electronic industries. Various ceramic integration technologies (joining, brazing, attachments, repair, etc.) play a role in fabrication and manufacturing of large and complex shaped parts of various functionalities. However, the development of robust and reliable integrated systems with optimum performance requires the understanding of many thermochemical and thermomechanical factors, particularly for high temperature applications. In this presentation, various challenges and opportunities in design, fabrication, and testing of integrated similar (ceramic-ceramic) and dissimilar (ceramic-metal) material systems will be discussed. Experimental results for bonding and integration of SiC based LDI fuel injector, high conductivity C/C composite based heat rejection system, solid oxide fuel cells system, ultra high temperature ceramics for leading edges, and ceramic composites for thermostructural applications will be presented. Potential opportunities and need for the development of innovative design philosophies, approaches, and integrated system testing under simulated application conditions will also be discussed.

  20. An Improved Design for Air Removal from Aerospace Fluid Loop Coolant Systems

    NASA Technical Reports Server (NTRS)

    Ritchie, Stephen M. C.; Holladay, Jon B.; Holt, J. Mike; Clark, Dallas W.

    2003-01-01

    Aerospace applications with requirements for large capacity heat removal (launch vehicles, platforms, payloads, etc.) typically utilize a liquid coolant fluid as a transport media to increase efficiency and flexibility in the vehicle design. An issue with these systems however, is susceptibility to the presence of noncondensable gas (NCG) or air. The presence of air in a coolant loop can have numerous negative consequences, including loss of centrifugal pump prime, interference with sensor readings, inhibition of heat transfer, and coolant blockage to remote systems. Hardware ground processing to remove this air is also cumbersome and time consuming which continuously drives recurring costs. Current systems for maintaining the system free of air are tailored and have demonstrated only moderate success. An obvious solution to these problems is the development and advancement of a passive gas removal device, or gas trap, that would be installed in the flight cooling system simplifying the initial coolant fill procedure and also maintaining the system during operations. The proposed device would utilize commercially available membranes thus increasing reliability and reducing cost while also addressing both current and anticipated applications. In addition, it maintains current pressure drop, water loss, and size restrictions while increasing tolerance for pressure increases due to gas build-up in the trap.

  1. Aerospace Technology.

    ERIC Educational Resources Information Center

    Paschke, Jean; And Others

    1991-01-01

    Describes the Sauk Rapids (Minnesota) High School aviation and aerospace curriculum that was developed by Curtis Olson and the space program developed by Gerald Mayall at Philadelphia's Northeast High School. Both were developed in conjunction with NASA. (JOW)

  2. Exploratory Analysis of Survey Data for Understanding Adoption of Novel Aerospace Systems

    NASA Astrophysics Data System (ADS)

    Reddy, Lauren M.

    In order to meet the increasing demand for manned and unmanned flight, the air transportation system must constantly evolve. As new technologies or operational procedures are conceived, we must determine their effect on humans in the system. In this research, we introduce a strategy to assess how individuals or organizations would respond to a novel aerospace system. We employ the most appropriate and sophisticated exploratory analysis techniques on the survey data to generate insight and identify significant variables. We employ three different methods for eliciting views from individuals or organizations who are affected by a system: an opinion survey, a stated preference survey, and structured interviews. We conduct an opinion survey of both the general public and stakeholders in the unmanned aircraft industry to assess their knowledge, attitude, and practices regarding unmanned aircraft. We complete a statistical analysis of the multiple-choice questions using multinomial logit and multivariate probit models and conduct qualitative analysis on free-text questions. We next present a stated preference survey of the general public on the use of an unmanned aircraft package delivery service. We complete a statistical analysis of the questions using multinomial logit, ordered probit, linear regression, and negative binomial models. Finally, we discuss structured interviews conducted on stakeholders from ANSPs and airlines operating in the North Atlantic. We describe how these groups may choose to adopt a new technology (space-based ADS-B) or operational procedure (in-trail procedures). We discuss similarities and differences between the stakeholders groups, the benefits and costs of in-trail procedures and space-based ADS-B as reported by the stakeholders, and interdependencies between the groups interviewed. To demonstrate the value of the data we generated, we explore how the findings from the surveys can be used to better characterize uncertainty in the cost

  3. Performance and Reliability Optimization for Aerospace Systems subject to Uncertainty and Degradation

    NASA Technical Reports Server (NTRS)

    Miller, David W.; Uebelhart, Scott A.; Blaurock, Carl

    2004-01-01

    This report summarizes work performed by the Space Systems Laboratory (SSL) for NASA Langley Research Center in the field of performance optimization for systems subject to uncertainty. The objective of the research is to develop design methods and tools to the aerospace vehicle design process which take into account lifecycle uncertainties. It recognizes that uncertainty between the predictions of integrated models and data collected from the system in its operational environment is unavoidable. Given the presence of uncertainty, the goal of this work is to develop means of identifying critical sources of uncertainty, and to combine these with the analytical tools used with integrated modeling. In this manner, system uncertainty analysis becomes part of the design process, and can motivate redesign. The specific program objectives were: 1. To incorporate uncertainty modeling, propagation and analysis into the integrated (controls, structures, payloads, disturbances, etc.) design process to derive the error bars associated with performance predictions. 2. To apply modern optimization tools to guide in the expenditure of funds in a way that most cost-effectively improves the lifecycle productivity of the system by enhancing the subsystem reliability and redundancy. The results from the second program objective are described. This report describes the work and results for the first objective: uncertainty modeling, propagation, and synthesis with integrated modeling.

  4. Optical Information Processing for Aerospace Applications

    NASA Technical Reports Server (NTRS)

    1981-01-01

    Current research in optical processing is reviewed. Its role in future aerospace systems is determined. The development of optical devices and components demonstrates that system concepts can be implemented in practical aerospace configurations.

  5. Henry Ford Health Systems

    Cancer.gov

    Henry Ford Health Systems evolved from a hospital into a system delivering care to 2.5 million patients and includes the Cancer Epidemiology, Prevention and Control Program, which focuses on epidemiologic and public health aspects of cancer.

  6. Development of a Solid-Oxide Fuel Cell/Gas Turbine Hybrid System Model for Aerospace Applications

    NASA Technical Reports Server (NTRS)

    Freeh, Joshua E.; Pratt, Joseph W.; Brouwer, Jacob

    2004-01-01

    Recent interest in fuel cell-gas turbine hybrid applications for the aerospace industry has led to the need for accurate computer simulation models to aid in system design and performance evaluation. To meet this requirement, solid oxide fuel cell (SOFC) and fuel processor models have been developed and incorporated into the Numerical Propulsion Systems Simulation (NPSS) software package. The SOFC and reformer models solve systems of equations governing steady-state performance using common theoretical and semi-empirical terms. An example hybrid configuration is presented that demonstrates the new capability as well as the interaction with pre-existing gas turbine and heat exchanger models. Finally, a comparison of calculated SOFC performance with experimental data is presented to demonstrate model validity. Keywords: Solid Oxide Fuel Cell, Reformer, System Model, Aerospace, Hybrid System, NPSS

  7. Advanced EVA Capabilities: A Study for NASA's Revolutionary Aerospace Systems Concept Program

    NASA Technical Reports Server (NTRS)

    Hoffman, Stephen J.

    2004-01-01

    This report documents the results of a study carried out as part of NASA s Revolutionary Aerospace Systems Concepts Program examining the future technology needs of extravehicular activities (EVAs). The intent of this study is to produce a comprehensive report that identifies various design concepts for human-related advanced EVA systems necessary to achieve the goals of supporting future space exploration and development customers in free space and on planetary surfaces for space missions in the post-2020 timeframe. The design concepts studied and evaluated are not limited to anthropomorphic space suits, but include a wide range of human-enhancing EVA technologies as well as consideration of coordination and integration with advanced robotics. The goal of the study effort is to establish a baseline technology "road map" that identifies and describes an investment and technical development strategy, including recommendations that will lead to future enhanced synergistic human/robot EVA operations. The eventual use of this study effort is to focus evolving performance capabilities of various EVA system elements toward the goal of providing high performance human operational capabilities for a multitude of future space applications and destinations. The data collected for this study indicate a rich and diverse history of systems that have been developed to perform a variety of EVA tasks, indicating what is possible. However, the data gathered for this study also indicate a paucity of new concepts and technologies for advanced EVA missions - at least any that researchers are willing to discuss in this type of forum.

  8. Current Trends on the Applicability of Ground Aerospace Materials Test Data to Space System Environments

    NASA Technical Reports Server (NTRS)

    Hirsch, David B.

    2010-01-01

    This slide presentation discusses the application of testing aerospace materials to the environment of space for flammability. Test environments include use of drop towers, and the parabolic flight to simulate the low gravity environment of space.

  9. Numerical Propulsion System Simulation: A Common Tool for Aerospace Propulsion Being Developed

    NASA Technical Reports Server (NTRS)

    Follen, Gregory J.; Naiman, Cynthia G.

    2001-01-01

    The NASA Glenn Research Center is developing an advanced multidisciplinary analysis environment for aerospace propulsion systems called the Numerical Propulsion System Simulation (NPSS). This simulation is initially being used to support aeropropulsion in the analysis and design of aircraft engines. NPSS provides increased flexibility for the user, which reduces the total development time and cost. It is currently being extended to support the Aviation Safety Program and Advanced Space Transportation. NPSS focuses on the integration of multiple disciplines such as aerodynamics, structure, and heat transfer with numerical zooming on component codes. Zooming is the coupling of analyses at various levels of detail. NPSS development includes using the Common Object Request Broker Architecture (CORBA) in the NPSS Developer's Kit to facilitate collaborative engineering. The NPSS Developer's Kit will provide the tools to develop custom components and to use the CORBA capability for zooming to higher fidelity codes, coupling to multidiscipline codes, transmitting secure data, and distributing simulations across different platforms. These powerful capabilities will extend NPSS from a zero-dimensional simulation tool to a multifidelity, multidiscipline system-level simulation tool for the full life cycle of an engine.

  10. Armenia: health system review.

    PubMed

    Richardson, Erica

    2013-01-01

    This analysis of the Armenian health system reviews the developments in organization and governance, health financing, healthcare provision, health reforms and health system performance since 2006. Armenia inherited a Semashko style health system on independence from the Soviet Union in 1991. Initial severe economic and sociopolitical difficulties during the 1990s affected the population health, though strong economic growth from 2000 benefited the populations health. Nevertheless, the Armenian health system remains unduly tilted towards inpatient care concentrated in the capital city despite overall reductions in hospital beds and concerted efforts to reform primary care provision. Changes in health system financing since independence have been more profound, as out-of-pocket (OOP) payments now account for over half of total health expenditure. This reduces access to essential services for the poorest households - particularly for inpatient care and pharmaceuticals - and many households face catastrophic health expenditure. Improving health system performance and financial equity are therefore the key challenges for health system reform. The scaling up of some successful recent programmes for maternal and child health may offer solutions, but require sustained financial resources that will be challenging in the context of financial austerity and the low base of public financing.

  11. Tunable Laser Development for In-flight Fiber Optic Based Structural Health Monitoring Systems

    NASA Technical Reports Server (NTRS)

    Richards, Lance; Parker, Allen; Chan, Patrick

    2014-01-01

    The objective of this task is to investigate, develop, and demonstrate a low-cost swept lasing light source for NASA DFRC's fiber optics sensing system (FOSS) to perform structural health monitoring on current and future aerospace vehicles. This is the regular update of the Tunable Laser Development for In-flight Fiber Optic Based Structural Health Monitoring Systems website.

  12. A comparative analysis of user preference-based and existing knowledge management systems attributes in the aerospace industry

    NASA Astrophysics Data System (ADS)

    Varghese, Nishad G.

    Knowledge management (KM) exists in various forms throughout organizations. Process documentation, training courses, and experience sharing are examples of KM activities performed daily. The goal of KM systems (KMS) is to provide a tool set which serves to standardize the creation, sharing, and acquisition of business critical information. Existing literature provides numerous examples of targeted evaluations of KMS, focusing on specific system attributes. This research serves to bridge the targeted evaluations with an industry-specific, holistic approach. The user preferences of aerospace employees in engineering and engineering-related fields were compared to profiles of existing aerospace KMS based on three attribute categories: technical features, system administration, and user experience. The results indicated there is a statistically significant difference between aerospace user preferences and existing profiles in the user experience attribute category, but no statistically significant difference in the technical features and system administration attribute categories. Additional analysis indicated in-house developed systems exhibit higher technical features and user experience ratings than commercial-off-the-self (COTS) systems.

  13. Revolutionary Aerospace Systems Concepts - Planning for the Future of Technology Investments

    NASA Technical Reports Server (NTRS)

    Ferebee, Melvin J., Jr.; Breckenridge, Roger A.; Hall, John B., Jr.

    2002-01-01

    In January, 2000, the NASA Administrator gave the following directions to Langley: "We will create a new role for Langley as a leader for the assessment of revolutionary aerospace system concepts and architectures, and provide resources needed to assure technology breakthroughs will be there to support these advanced concepts. This is critical in determining how NASA can best invest its resources to enable future missions." The key objective of the RASC team is to look beyond current research and technology (R&T) programs and missions and evolutionary technology development approaches with a "top-down" perspective to explore possible new mission capabilities. The accomplishment of this objective will allow NASA to provide the ability to go anywhere, anytime - safely, and affordably- to meet its strategic goals for exploration, science, and commercialization. The RASC Team will seek to maximize the cross-Enterprise benefits of these revolutionary capabilities as it defines the revolutionary enabling technology areas and performance levels needed. The product of the RASC Team studies will be revolutionary systems concepts along with enabling technologies and payoffs in new mission capabilities, which these concepts can provide. These results will be delivered to the NASA Enterprises and the NASA Chief Technologist for use in planning revolutionary future NASA R&T program investments.

  14. Modeling the Behaviour of an Advanced Material Based Smart Landing Gear System for Aerospace Vehicles

    SciTech Connect

    Varughese, Byji; Dayananda, G. N.; Rao, M. Subba

    2008-07-29

    The last two decades have seen a substantial rise in the use of advanced materials such as polymer composites for aerospace structural applications. In more recent years there has been a concerted effort to integrate materials, which mimic biological functions (referred to as smart materials) with polymeric composites. Prominent among smart materials are shape memory alloys, which possess both actuating and sensory functions that can be realized simultaneously. The proper characterization and modeling of advanced and smart materials holds the key to the design and development of efficient smart devices/systems. This paper focuses on the material characterization; modeling and validation of the model in relation to the development of a Shape Memory Alloy (SMA) based smart landing gear (with high energy dissipation features) for a semi rigid radio controlled airship (RC-blimp). The Super Elastic (SE) SMA element is configured in such a way that it is forced into a tensile mode of high elastic deformation. The smart landing gear comprises of a landing beam, an arch and a super elastic Nickel-Titanium (Ni-Ti) SMA element. The landing gear is primarily made of polymer carbon composites, which possess high specific stiffness and high specific strength compared to conventional materials, and are therefore ideally suited for the design and development of an efficient skid landing gear system with good energy dissipation characteristics. The development of the smart landing gear in relation to a conventional metal landing gear design is also dealt with.

  15. A Survey of Emerging Materials for Revolutionary Aerospace Vehicle Structures and Propulsion Systems

    NASA Technical Reports Server (NTRS)

    Harris, Charles E.; Shuart, Mark J.; Gray, Hugh R.

    2002-01-01

    The NASA Strategic Plan identifies the long-term goal of providing safe and affordable space access, orbital transfer, and interplanetary transportation capabilities to enable scientific research, human, and robotic exploration, and the commercial development of space. Numerous scientific and engineering breakthroughs will be required to develop the technology required to achieve this goal. Critical technologies include advanced vehicle primary and secondary structure, radiation protection, propulsion and power systems, fuel storage, electronics and devices, sensors and science instruments, and medical diagnostics and treatment. Advanced materials with revolutionary new capabilities are an essential element of each of these technologies. A survey of emerging materials with applications to aerospace vehicle structures and propulsion systems was conducted to assist in long-term Agency mission planning. The comprehensive survey identified materials already under development that could be available in 5 to 10 years and those that are still in the early research phase and may not be available for another 20 to 30 years. The survey includes typical properties, a description of the material and processing methods, the current development status, and the critical issues that must be overcome to achieve commercial viability.

  16. Health systems in India

    PubMed Central

    Chokshi, M; Patil, B; Khanna, R; Neogi, S B; Sharma, J; Paul, V K; Zodpey, S

    2016-01-01

    Health systems and polices have a critical role in determining the manner in which health services are delivered, utilized and affect health outcomes. ‘Health' being a state subject, despite the issuance of the guidelines by the central government, the final prerogative on implementation of the initiatives on newborn care lies with the states. This article briefly describes the public health structure in the country and traces the evolution of the major health programs and initiatives with a particular focus on newborn health. PMID:27924110

  17. Tajikistan: health system review.

    PubMed

    Khodjamurodov, Ghafur; Rechel, Bernd

    2010-01-01

    The Health Systems in Transition (HiT) profiles are country-based reports that provide a detailed description of a health system and of policy initiatives in progress or under development. HiTs examine different approaches to the organization, financing and delivery of health services and the role of the main actors in health systems; describe the institutional framework, process, content and implementation of health and health care policies; and highlight challenges and areas that require more in-depth analysis. Tajikistan is undergoing a complex transition from a health system inherited from the Soviet period to new forms of management, financing and health care provision. Following independence and the consequences of the civil war, health funding collapsed and informal out-of-pocket payments became the main source of revenue, with particularly severe consequences for the poor. With the aim of ensuring equitable access to health care and formalizing out-of-pocket payments, the Ministry of Health developed a programme that encompassed a basic benefit package (also known as the guaranteed benefit package) for people in need and formal co-payments for other groups of the population. One of the main challenges for the future will be to reorient the health system towards primary care and public health rather than hospital-based secondary and tertiary care. Pilots of primary care reform, introducing per capita financing, are under way in three of the country's oblasts. There are marked geographical imbalances in health care resources and financing, favouring the capital and regional centres over rural areas. There are also significant inequities in health care expenditures across regions. The quality of care is another major concern, owing to the lack of investment in health facilities and technologies, an insufficient supply of pharmaceuticals, poorly trained health care workers, and a lack of medical protocols and systems for quality improvement.

  18. Linear-parameter-varying gain-scheduled control of aerospace systems

    NASA Astrophysics Data System (ADS)

    Barker, Jeffrey Michael

    The dynamics of many aerospace systems vary significantly as a function of flight condition. Robust control provides methods of guaranteeing performance and stability goals across flight conditions. In mu-syntthesis, changes to the dynamical system are primarily treated as uncertainty. This method has been successfully applied to many control problems, and here is applied to flutter control. More recently, two techniques for generating robust gain-scheduled controller have been developed. Linear fractional transformation (LFT) gain-scheduled control is an extension of mu-synthesis in which the plant and controller are explicit functions of parameters measurable in real-time. This LFT gain-scheduled control technique is applied to the Benchmark Active Control Technology (BACT) wing, and compared with mu-synthesis control. Linear parameter-varying (LPV) gain-scheduled control is an extension of Hinfinity control to parameter varying systems. LPV gain-scheduled control directly incorporates bounds on the rate of change of the scheduling parameters, and often reduces conservatism inherent in LFT gain-scheduled control. Gain-scheduled LPV control of the BACT wing compares very favorably with the LFT controller. Gain-scheduled LPV controllers are generated for the lateral-directional and longitudinal axes of the Innovative Control Effectors (ICE) aircraft and implemented in nonlinear simulations and real-time piloted nonlinear simulations. Cooper-Harper and pilot-induced oscillation ratings were obtained for an initial design, a reference aircraft and a redesign. Piloted simulation results for the initial LPV gain-scheduled control of the ICE aircraft are compared with results for a conventional fighter aircraft in discrete pitch and roll angle tracking tasks. The results for the redesigned controller are significantly better than both the previous LPV controller and the conventional aircraft.

  19. Aerospace Medicine

    NASA Technical Reports Server (NTRS)

    Davis, Jeffrey R.

    2006-01-01

    This abstract describes the content of a presentation for ground rounds at Mt. Sinai School of Medicine. The presentation contains three sections. The first describes the history of aerospace medicine beginning with early flights with animals. The second section of the presentation describes current programs and planning for future missions. The third section describes the medical challenges of exploration missions.

  20. Ukraine: health system review.

    PubMed

    Lekhan, Valery; Rudiy, Volodymyr; Shevchenko, Maryna; Nitzan Kaluski, Dorit; Richardson, Erica

    2015-03-01

    This analysis of the Ukrainian health system reviews recent developments in organization and governance, health financing, health care provision, health reforms and health system performance. Since the country gained independence from the Soviet Union in 1991, successive governments have sought to overcome funding shortfalls and modernize the health care system to meet the needs of the population's health. However, no fundamental reform of the system has yet been implemented and consequently it has preserved the main features characteristic of the Semashko model; there is a particularly high proportion of total health expenditure paid out of pocket (42.3 % in 2012), and incentives within the system do not focus on quality or outcomes. The most recent health reform programme began in 2010 and sought to strengthen primary and emergency care, rationalize hospitals and change the model of health care financing from one based on inputs to one based on outputs. Fundamental issues that hampered reform efforts in the past re-emerged, but conflict and political instability have proved the greatest barriers to reform implementation and the programme was abandoned in 2014. More recently, the focus has been on more pressing humanitarian concerns arising from the conflict in the east of Ukraine. It is hoped that greater political, social and economic stability in the future will provide a better environment for the introduction of deep reforms to address shortcomings in the Ukrainian health system.

  1. Belgium: Health system review.

    PubMed

    Gerkens, Sophie; Merkur, Sherry

    2010-01-01

    The Health Systems in Transition (HiT) profiles are country-based reports that provide a detailed description of a health system and of policy initiatives in progress or under development. HiTs examine different approaches to the organization, financing and delivery of health services and the role of the main actors in health systems; describe the institutional framework, process, content and implementation of health and health care policies; and highlight challenges and areas that require more in-depth analysis. The Belgian population continues to enjoy good health and long life expectancy. This is partly due to good access to health services of high quality. Financing is based mostly on proportional social security contributions and progressive direct taxation. The compulsory health insurance is combined with a mostly private system of health care delivery, based on independent medical practice, free choice of physician and predominantly fee-for-service payment. This Belgian HiT profile (2010) presents the evolution of the health system since 2007, including detailed information on new policies. While no drastic reforms were undertaken during this period, policy-makers have pursued the goals of improving access to good quality of care while making the system sustainable. Reforms to increase the accessibility of the health system include measures to reduce the out-of-pocket payments of more vulnerable populations (low-income families and individuals as well as the chronically ill). Quality of care related reforms have included incentives to better integrate different levels of care and the establishment of information systems, among others. Additionally, several measures on pharmaceutical products have aimed to reduce costs for both the National Institute for Health and Disability Insurance (NIHDI) and patients, while maintaining the quality of care.

  2. France: Health System Review.

    PubMed

    Chevreul, Karine; Berg Brigham, Karen; Durand-Zaleski, Isabelle; Hernandez-Quevedo, Cristina

    2015-01-01

    This analysis of the French health system reviews recent developments in organization and governance, health financing, health care provision, health reforms and health system performance. The French population has a good level of health, with the second highest life expectancy in the world for women. It has a high level of choice of providers, and a high level of satisfaction with the health system. However, unhealthy habits such as smoking and harmful alcohol consumption remain significant causes of avoidable mortality. Combined with the significant burden of chronic diseases, this has underscored the need for prevention and integration of services, although these have not historically been strengths of the French system. Although the French health care system is a social insurance system, it has historically had a stronger role for the state than other Bismarckian social insurance systems. Public financing of health care expenditure is among the highest in Europe and out-of-pocket spending among the lowest. Public insurance is compulsory and covers the resident population; it is financed by employee and employer contributions as well as increasingly through taxation. Complementary insurance plays a significant role in ensuring equity in access. Provision is mixed; providers of outpatient care are largely private, and hospital beds are predominantly public or private non-profit-making. Despite health outcomes being among the best in the European Union, social and geographical health inequities remain. Inequality in the distribution of health care professionals is a considerable barrier to equity. The rising cost of health care and the increasing demand for long-term care are also of concern. Reforms are ongoing to address these issues, while striving for equity in financial access; a long-term care reform including public coverage of long-term care is still pending.

  3. Aerospace Environmental Technology Conference

    NASA Technical Reports Server (NTRS)

    Whitaker, A. F. (Editor)

    1995-01-01

    The mandated elimination of CFC's, Halons, TCA, and other ozone depleting chemicals and specific hazardous materials has required changes and new developments in aerospace materials and processes. The aerospace industry has been involved for several years in providing product substitutions, redesigning entire production processes, and developing new materials that minimize or eliminate damage to the environment. These activities emphasize replacement cleaning solvents and their application verifications, compliant coatings including corrosion protection systems, and removal techniques, chemical propulsion effects on the environment, and the initiation of modifications to relevant processing and manufacturing specifications and standards. The Executive Summary of this Conference is published as NASA CP-3297.

  4. Frontier Aerospace Opportunities

    NASA Technical Reports Server (NTRS)

    Bushnell, Dennis M.

    2014-01-01

    Discussion and suggested applications of the many ongoing technology opportunities for aerospace products and missions, resulting in often revolutionary capabilities. The, at this point largely unexamined, plethora of possibilities going forward, a subset of which is discussed, could literally reinvent aerospace but requires triage of many possibilities. Such initial upfront homework would lengthen the Research and Development (R&D) time frame but could greatly enhance the affordability and performance of the evolved products and capabilities. Structural nanotubes and exotic energetics along with some unique systems approaches are particularly compelling.

  5. Advanced information processing system - Status report. [for fault tolerant and damage tolerant data processing for aerospace vehicles

    NASA Technical Reports Server (NTRS)

    Brock, L. D.; Lala, J.

    1986-01-01

    The Advanced Information Processing System (AIPS) is designed to provide a fault tolerant and damage tolerant data processing architecture for a broad range of aerospace vehicles. The AIPS architecture also has attributes to enhance system effectiveness such as graceful degradation, growth and change tolerance, integrability, etc. Two key building blocks being developed by the AIPS program are a fault and damage tolerant processor and communication network. A proof-of-concept system is now being built and will be tested to demonstrate the validity and performance of the AIPS concepts.

  6. Poland health system review.

    PubMed

    Sagan, Anna; Panteli, Dimitra; Borkowski, W; Dmowski, M; Domanski, F; Czyzewski, M; Gorynski, Pawel; Karpacka, Dorota; Kiersztyn, E; Kowalska, Iwona; Ksiezak, Malgorzata; Kuszewski, K; Lesniewska, A; Lipska, I; Maciag, R; Madowicz, Jaroslaw; Madra, Anna; Marek, M; Mokrzycka, A; Poznanski, Darius; Sobczak, Alicja; Sowada, Christoph; Swiderek, Maria; Terka, A; Trzeciak, Patrycja; Wiktorzak, Katarzyna; Wlodarczyk, Cezary; Wojtyniak, B; Wrzesniewska-Wal, Iwona; Zelwianska, Dobrawa; Busse, Reinhard

    2011-01-01

    Since the successful transition to a freely elected parliament and a market economy after 1989, Poland is now a stable democracy and is well represented within political and economic organizations in Europe and worldwide. The strongly centralized health system based on the Semashko model was replaced with a decentralized system of mandatory health insurance, complemented with financing from state and territorial self-government budgets. There is a clear separation of health care financing and provision: the National Health Fund (NFZ) the sole payer in the system is in charge of health care financing and contracts with public and non-public health care providers. The Ministry of Health is the key policy-maker and regulator in the system and is supported by a number of advisory bodies, some of them recently established. Health insurance contributions, borne entirely by employees, are collected by intermediary institutions and are pooled by the NFZ and distributed between the 16 regional NFZ branches. In 2009, Poland spent 7.4% of its gross domestic product (GDP) on health. Around 70% of health expenditure came from public sources and over 83.5% of this expenditure can be attributed to the (near) universal health insurance. The relatively high share of private expenditure is mostly represented by out-of-pocket (OOP) payments, mainly in the form of co-payments and informal payments. Voluntary health insurance (VHI) does not play an important role and is largely limited to medical subscription packages offered by employers. Compulsory health insurance covers 98% of the population and guarantees access to a broad range of health services. However, the limited financial resources of the NFZ mean that broad entitlements guaranteed on paper are not always available. Health care financing is overall at most proportional: while financing from health care contributions is proportional and budgetary subsidies to system funding are progressive, high OOP expenditures

  7. Malta: Health system review.

    PubMed

    Azzopardi Muscat, Natasha; Calleja, Neville; Calleja, Antoinette; Cylus, Jonathan

    2014-01-01

    This analysis of the Maltese health system reviews the developments in its organization and governance, health financing, health-care provision, health reforms and health system performance. The health system in Malta consists of a public sector, which is free at the point of service and provides a comprehensive basket of health services for all its citizens, and a private sector, which accounts for a third of total health expenditure and provides the majority of primary care. Maltese citizens enjoy one of the highest life expectancies in Europe. Nevertheless, non-communicable diseases pose a major concern with obesity being increasingly prevalent among both adults and children. The health system faces important challenges including a steadily ageing population, which impacts the sustainability of public finances. Other supply constraints stem from financial and infrastructural limitations. Nonetheless, there exists a strong political commitment to ensure the provision of a healthcare system that is accessible, of high quality, safe and also sustainable. This calls for strategic investments to underpin a revision of existing processes whilst shifting the focus of care away from hospital into the community.

  8. Aerospace Safety Advisory Panel

    NASA Technical Reports Server (NTRS)

    1985-01-01

    The following areas of NASA's responsibilities are examined: (1) the Space Transportation System (STS) operations and evolving program elements; (2) establishment of the Space Station program organization and issuance of requests for proposals to the aerospace industry; and (3) NASA's aircraft operations, including research and development flight programs for two advanced X-type aircraft.

  9. Circumpolar Inuit health systems

    PubMed Central

    Ellsworth, Leanna; O'Keeffe, Annmaree

    2013-01-01

    Background The Inuit are an indigenous people totalling about 160,000 and living in 4 countries across the Arctic – Canada, Greenland, USA (Alaska) and Russia (Chukotka). In essence, they are one people living in 4 countries. Although there have been significant improvements in Inuit health and survival over the past 50 years, stark differences persist between the key health indicators for Inuit and those of the national populations in the United States, Canada and Russia and between Greenland and Denmark. On average, life expectancy in all 4 countries is lower for Inuit. Infant mortality rates are also markedly different with up to 3 times more infant deaths than the broader national average. Underlying these statistical differences are a range of health, social, economic and environmental factors which have affected Inuit health outcomes. Although the health challenges confronting the Inuit are in many cases similar across the Arctic, the responses to these challenges vary in accordance with the types of health systems in place in each of the 4 countries. Each of the 4 countries has a different health care system with varying degrees of accessibility and affordability for Inuit living in urban, rural and remote areas. Objective To describe funding and governance arrangements for health services to Inuit in Canada, Greenland, USA (Alaska) and Russia (Chukotka) and to determine if a particular national system leads to better outcomes than any of the other 3 systems. Study design Literature review. Results It was not possible to draw linkages between the different characteristics of the respective health systems, the corresponding financial investment and the systems’ effectiveness in adequately serving Inuit health needs for several reasons including the very limited and inadequate collection of Inuit-specific health data by Canada, Alaska and Russia; and second, the data that are available do not necessarily provide a feasible point of comparison in terms of

  10. Bulgaria health system review.

    PubMed

    Dimova, Antoniya; Rohova, Maria; Moutafova, Emanuela; Atanasova, Elka; Koeva, Stefka; Panteli, Dimitra; van Ginneken, Ewout

    2012-01-01

    In the last 20 years, demographic development in Bulgaria has been characterized by population decline, a low crude birth rate, a low fertility rate, a high mortality rate and an ageing population. A stabilizing political situation since the early 2000s and an economic upsurge since the mid-2000s were important factors in the slight increase of the birth and fertility rates and the slight decrease in standardized death rates. In general, Bulgaria lags behind European Union (EU) averages in most mortality and morbidity indicators. Life expectancy at birth reached 73.3 years in 2008 with the main three causes of death being diseases of the circulatory system, malignant neoplasms and diseases of the respiratory system. One of the most important risk factors overall is smoking, and the average standardized death rate for smoking-related causes in 2008 was twice as high as the EU15 average. The Bulgarian health system is characterized by limited statism. The Ministry of Health is responsible for national health policy and the overall organization and functioning of the health system and coordinates with all ministries with relevance to public health. The key players in the insurance system are the insured individuals, the health care providers and the third party payers, comprising the National Health Insurance Fund, the single payer in the social health insurance (SHI) system, and voluntary health insurance companies (VHICs). Health financing consists of a publicprivate mix. Health care is financed from compulsory health insurance contributions, taxes, outofpocket (OOP) payments, voluntary health insurance (VHI) premiums, corporate payments, donations, and external funding. Total health expenditure (THE) as a share of gross domestic product (GDP) increased from 5.3% in 1995 to 7.3% in 2008. At the latter date it consisted of 36.5% OOP payments, 34.8% SHI, 13.6% Ministry of Health expenditure, 9.4% municipality expenditure and 0.3% VHI. Informal payments in the health

  11. Switzerland: Health System Review.

    PubMed

    De Pietro, Carlo; Camenzind, Paul; Sturny, Isabelle; Crivelli, Luca; Edwards-Garavoglia, Suzanne; Spranger, Anne; Wittenbecher, Friedrich; Quentin, Wilm

    2015-01-01

    This analysis of the Swiss health system reviews recent developments in organization and governance, health financing, health care provision, health reforms and health system performance. The Swiss health system is highly complex, combining aspects of managed competition and corporatism (the integration of interest groups in the policy process) in a decentralized regulatory framework shaped by the influences of direct democracy. The health system performs very well with regard to a broad range of indicators. Life expectancy in Switzerland (82.8 years) is the highest in Europe after Iceland, and healthy life expectancy is several years above the European Union (EU) average. Coverage is ensured through mandatory health insurance (MHI), with subsidies for people on low incomes. The system offers a high degree of choice and direct access to all levels of care with virtually no waiting times, though managed care type insurance plans that include gatekeeping restrictions are becoming increasingly important. Public satisfaction with the system is high and quality is generally viewed to be good or very good. Reforms since the year 2000 have improved the MHI system, changed the financing of hospitals, strengthened regulations in the area of pharmaceuticals and the control of epidemics, and harmonized regulation of human resources across the country. In addition, there has been a slow (and not always linear) process towards more centralization of national health policy-making. Nevertheless, a number of challenges remain. The costs of the health care system are well above the EU average, in particular in absolute terms but also as a percentage of gross domestic product (GDP) (11.5%). MHI premiums have increased more quickly than incomes since 2003. By European standards, the share of out-of-pocket payments is exceptionally high at 26% of total health expenditure (compared to the EU average of 16%). Low and middle-income households contribute a greater share of their income to

  12. Regional Health Information Systems

    PubMed Central

    Fuller, Sherrilynne

    1997-01-01

    Abstract In general, there is agreement that robust integrated information systems are the foundation for building successful regional health care delivery systems. Integrated Advanced Information Management System (IAIMS) institutions that, over the years, have developed strategies for creating cohesive institutional information systems and services are finding that IAIMS strategies work well in the even more complex regional environment. The key elements of IAIMS planning are described and lessons learned are discussed in the context of regional health information systems developed. The challenges of aligning the various information agencies and agendas in support of a regional health information system are complex ; however, the potential rewards for health care in quality, efficacy, and cost savings are enormous. PMID:9067887

  13. Estonia: health system review.

    PubMed

    Lai, Taavi; Habicht, Triin; Kahur, Kristiina; Reinap, Marge; Kiivet, Raul; van Ginneken, Ewout

    2013-01-01

    This analysis of the Estonian health system reviews recent developments in organization and governance, health financing, health-care provision, health reforms and health system performance. Without doubt, the main issue has been the 2008 financial crisis. Although Estonia has managed the downturn quite successfully and overall satisfaction with the system remains high, it is hard to predict the longer-term effects of the austerity package. The latter included some cuts in benefits and prices, increased cost sharing for certain services, extended waiting times, and a reduction in specialized care. In terms of health outcomes, important progress was made in life expectancy, which is nearing the European Union (EU) average, and infant mortality. Improvements are necessary in smoking and alcohol consumption, which are linked to the majority of avoidable diseases. Although the health behaviour of the population is improving, large disparities between groups exist and obesity rates, particularly among young people, are increasing. In health care, the burden of out-of-pocket payments is still distributed towards vulnerable groups. Furthermore, the number of hospitals, hospital beds and average length of stay has decreased to the EU average level, yet bed occupancy rates are still below EU averages and efficiency advances could be made. Going forwards, a number of pre-crisis challenges remain. These include ensuring sustainability of health care financing, guaranteeing a sufficient level of human resources, prioritizing patient-centred health care, integrating health and social care services, implementing intersectoral action to promote healthy behaviour, safeguarding access to health care for lower socioeconomic groups, and, lastly, improving evaluation and monitoring tools across the health system.

  14. Performances and reliability predictions of optical data transmission links using a system simulator for aerospace applications

    NASA Astrophysics Data System (ADS)

    Bechou, L.; Deshayes, Y.; Aupetit-Berthelemot, C.; Guerin, A.; Tronche, C.

    - requency carrier) on system performances (eye diagram, quality factor and BER). The studied link consists in 4× 2.5 Gbits/s WDM channels with direct modulation and equally spaced (0,8 nm) around the 1550 nm central wavelength. Results clearly show that variation of fundamental parameters such as bias current or central wavelength induces a penalization of dynamic performances of the complete WDM link. In addition different degradation kinetics of aged Laser diodes from a same batch have been implemented to build the final distribution of Q-factor and BER values after 25 years. When considering long optical distance, fiber attenuation, EDFA noise, dispersion, PMD, ... penalize network performances that can be compensated using Forward Error Correction (FEC) coding. Three methods have been investigated in the case of On-Off Keying (OOK) transmission over an unipolar optical channel corrupted by Gaussian noise. Such system simulations highlight the impact of component parameter degradations on the whole network performances allowing to optimize various time and cost consuming sensitivity analyses at the early stage of the system development. Thus the validity of failure criteria in relation with mission profiles can be evaluated representing a significant part of the general PDfR effort in particular for aerospace applications.

  15. The Role of Aerospace Technology in Agriculture. The 1977 Summer Faculty Fellowship Program in Engineering Systems Design

    NASA Technical Reports Server (NTRS)

    1977-01-01

    Possibilities were examined for improving agricultural productivity through the application of aerospace technology. An overview of agriculture and of the problems of feeding a growing world population are presented. The present state of agriculture, of plant and animal culture, and agri-business are reviewed. Also analyzed are the various systems for remote sensing, particularly applications to agriculture. The report recommends additional research and technology in the areas of aerial application of chemicals, of remote sensing systems, of weather and climate investigations, and of air vehicle design. Also considered in detail are the social, legal, economic, and political results of intensification of technical applications to agriculture.

  16. Romania: Health System Review.

    PubMed

    Vladescu, Cristian; Scintee, Silvia Gabriela; Olsavszky, Victor; Hernandez-Quevedo, Cristina; Sagan, Anna

    2016-08-01

    This analysis of the Romanian health system reviews recent developments in organization and governance, health financing, health care provision, health reforms and health system performance. The Romanian health care system is a social health insurance system that has remained highly centralized despite recent efforts to decentralize some regulatory functions. It provides a comprehensive benefits package to the 85% of the population that is covered, with the remaining population having access to a minimum package of benefits. While every insured person has access to the same health care benefits regardless of their socioeconomic situation, there are inequities in access to health care across many dimensions, such as rural versus urban, and health outcomes also differ across these dimensions. The Romanian population has seen increasing life expectancy and declining mortality rates but both remain among the worst in the European Union. Some unfavourable trends have been observed, including increasing numbers of new HIV/AIDS diagnoses and falling immunization rates. Public sources account for over 80% of total health financing. However, that leaves considerable out-of-pocket payments covering almost a fifth of total expenditure. The share of informal payments also seems to be substantial, but precise figures are unknown. In 2014, Romania had the lowest health expenditure as a share of gross domestic product (GDP) among the EU Member States. In line with the government's objective of strengthening the role of primary care, the total number of hospital beds has been decreasing. However, health care provision remains characterized by underprovision of primary and community care and inappropriate use of inpatient and specialized outpatient care, including care in hospital emergency departments. The numbers of physicians and nurses are relatively low in Romania compared to EU averages. This has mainly been attributed to the high rates of workers emigrating abroad over the

  17. Hungary health system review.

    PubMed

    Gaal, Peter; Szigeti, Szabolcs; Csere, Marton; Gaskins, Matthew; Panteli, Dimitra

    2011-01-01

    Hungary has achieved a successful transition from an overly centralized, integrated Semashko-style health care system to a purchaser provider split model with output-based payment methods. Although there have been substantial increases in life expectancy in recent years among both men and women, many health outcomes remain poor, placing Hungary among the countries with the worst health status and highest rate of avoidable mortality in the EU (life expectancy at birth trailed the EU27 average by 5.1 years in 2009). Lifestyle factors especially the traditionally unhealthy Hungarian diet, alcohol consumption and smoking play a very important role in shaping the overall health of the population.In the single-payer system, the recurrent expenditure on health services is funded primarily through compulsory, non-risk-related contributions made by eligible individuals or from the state budget. The central government has almost exclusive power to formulate strategic direction and to issue and enforce regulations regarding health care. In 2009 Hungary spent 7.4% of its gross domestic product (GDP) on health, with public expenditure accounting for 69.7% of total health spending, and with health expenditure per capita ranking slightly above the average for the new EU Member States, but considerably below the average for the EU27 in 2008. Health spending has been unstable over the years, with several waves of increases followed by longer periods of cost-containment and budget cuts. The share of total health expenditure attributable to private sources has been increasing, most of it accounted for by out-of-pocket (OOP) expenses. A substantial share of the latter can be attributed to informal payments, which are a deeply rooted characteristic of the Hungarian health system and a source of inefficiency and inequity. Voluntary health insurance, on the other hand, amounted to only 7.4% of private and 2.7% of total health expenditure in 2009. Revenue sources for health have been

  18. Smart actuators: Valve Health Monitor (VHM) system

    NASA Astrophysics Data System (ADS)

    Perotti, José; Lucena, Angel; Burns, Bradley

    2006-05-01

    The health of electromechanical systems (actuators) and specifically of solenoid valves is a primary concern at Kennedy Space Center (KSC). These systems control the storage and transfer of such commodities as liquid hydrogen. The potential for the failure of electromechanical systems to delay a scheduled launch or to cause personnel injury requires continual maintenance and testing of the systems to ensure their readiness. Monitoring devices need to be incorporated into these systems to verify the health and performance of the valves during real operating conditions. It is very advantageous to detect degradation and/or potential problems before they happen. This feature will not only provide safer operation but save the cost of unnecessary maintenance and inspections. Solenoid valve status indicators are often based upon microswitches that work by physically contacting a valve's poppet assembly. All of the physical contact and movement tends to be very unreliable and is subject to wear and tear of the assemblies, friction, breakage of the switch, and even leakage of the fluid (gas or liquid) in the valve. The NASA Instrumentation Branch, together with its contractor, ASRC Aerospace, has developed a solenoid valve smart current signature sensor that monitors valves in a noninvasive mode. The smart system monitors specific electrical parameters of the solenoid valves and detects and predicts the performance and health of the device. The information obtained from the electrical signatures of these valves points to not only electrical components failures in the valves but also mechanical failures and/or degradations.

  19. Effects of Aerospace Contaminants on EPIKOTE(TM) 862 / EPIKURE(TM)-W Filament Winding Resin System: An Experimental Study

    NASA Astrophysics Data System (ADS)

    Moffet, Mitchell Lee

    This thesis presents the findings of extensive experiments to determine the effects of various common aerospace chemicals on EPIKOTE(TM) 862 (resin) and EPIKURE(TM) W (curing agent), a resin system utilized in filament wound carbon fiber reinforced polymer (CRP) structures. Test specimens of the neat resin system were fabricated and exposed for up to 6 months at room temperature to 11 fluids representing typical aerospace chemicals found on the flight line, and to 74°C tap water. Post exposure the samples were tested in torsion using a rheometer, which performed strain sweeps and frequency sweeps on all the samples. In addition, a subset of the samples received a temperatures sweep. The rheology test parameters represented the nominal stress levels CRP structures would expect to see in operation. In addition to the rheological tests, dimensional and mass measurements were made of the samples both pre and post exposure to study the physical changes due to the chemical interactions. Based on the results, a common detergent, MEK on structures manufactured with the 862W resin system should be prevented or severely limited. It had a significant impact on the performance of the resin system within 3 months, with no visible indications of the degradation. The resins system had good chemical resistance to all the other chemicals used in this study including hot water.

  20. AI aerospace components

    NASA Technical Reports Server (NTRS)

    Heindel, Troy A.; Murphy, Terri B.; Rasmussen, Arthur N.; Mcfarland, Robert Z.; Montgomery, Ronnie E.; Pohle, George E.; Heard, Astrid E.; Atkinson, David J.; Wedlake, William E.; Anderson, John M.

    1991-01-01

    An evaluation is made of the application of novel, AI-capabilities-related technologies to aerospace systems. Attention is given to expert-system shells for Space Shuttle Orbiter mission control, manpower and processing cost reductions at the NASA Kennedy Space Center's 'firing rooms' for liftoff monitoring, the automation of planetary exploration systems such as semiautonomous mobile robots, and AI for battlefield staff-related functions.

  1. Onboard System Health Assessment

    NASA Technical Reports Server (NTRS)

    Barry, Tom; Cunningham, Harry

    1990-01-01

    Viewgraphs and discussion of onboard system health assessment are presented. Success of the space station program will be measured by how well it addresses the basic requirements for (1) maintaining the orbiting Space Station Freedom fully operational for its projected life of thirty years, and (2) the cost-effective execution of the overall space station program. Onboard system health assessment must provide complete and thorough testing capabilities along with effective associated redundancy/fault management.

  2. France: Health system review.

    PubMed

    Chevreul, Karine; Durand-Zaleski, Isabelle; Bahrami, Stéphane Bahrami; Hernández-Quevedo, Cristina; Mladovsky, Philipa

    2010-01-01

    The Health Systems in Transition (HiT) profiles are country-based reports that provide a detailed description of a health system and of policy initiatives in progress or under development. HiTs examine different approaches to the organization, financing and delivery of health services and the role of the main actors in health systems; describe the institutional framework, process, content and implementation of health and health care policies; and highlight challenges and areas that require more in-depth analysis. The French health care system is a mix of public and private providers and insurers. Public insurance, financed by both employees and employer contributions and earmarked taxes, is compulsory and covers almost the whole population, while private insurance is of a complementary type and voluntary. Providers of outpatient care are largely private. Hospital beds are predominantly public or private non-profit-making. The French population enjoys good health and a high level of choice of providers. It is relatively satisfied with the health care system. However, as in many other countries, the rising cost of health care is of concern with regards to the objectives of the health care system. Many measures were or are being implemented in order to contain costs and increase efficiency. These include, for example, developing pay-for-performance for both hospitals and self-employed providers and increasing quality of professional practice; refining patient pathways; raising additional revenue for statutory health insurance (SHI); and increasing the role of voluntary health insurance (VHI). Meanwhile, socioeconomic disparities and geographic inequality in the density of health care professionals remain considerable challenges to providing a good level of equity in access to health care. Organizational changes at the regional level are important in attempting to tackle both equity and efficiency-related challenges. While the organizational structure of the system

  3. Cost-effectiveness of integrated analysis/design systems /IPAD/ An executive summary. II. [for aerospace vehicles

    NASA Technical Reports Server (NTRS)

    Miller, R. E., Jr.; Hansen, S. D.; Redhed, D. D.; Southall, J. W.; Kawaguchi, A. S.

    1974-01-01

    Evaluation of the cost-effectiveness of integrated analysis/design systems with particular attention to Integrated Program for Aerospace-Vehicle Design (IPAD) project. An analysis of all the ingredients of IPAD indicates the feasibility of a significant cost and flowtime reduction in the product design process involved. It is also concluded that an IPAD-supported design process will provide a framework for configuration control, whereby the engineering costs for design, analysis and testing can be controlled during the air vehicle development cycle.

  4. Aerospace Education - An Overview

    ERIC Educational Resources Information Center

    Journal of Aerospace Education, 1975

    1975-01-01

    Discusses the surge of interest throughout the country in aerospace education and discusses what aerospace education is, the implications in career education and the relevance of aerospace education in the curriculum. (BR)

  5. Basic Aerospace Education Library

    ERIC Educational Resources Information Center

    Journal of Aerospace Education, 1975

    1975-01-01

    Lists the most significant resource items on aerospace education which are presently available. Includes source books, bibliographies, directories, encyclopedias, dictionaries, audiovisuals, curriculum/planning guides, aerospace statistics, aerospace education statistics and newsletters. (BR)

  6. Aerospace gerontology

    NASA Technical Reports Server (NTRS)

    Comfort, A.

    1982-01-01

    The relevancy of gerontology and geriatrics to the discipline of aerospace medicine is examined. It is noted that since the shuttle program gives the facility to fly passengers, including specially qualified older persons, it is essential to examine response to acceleration, weightlessness, and re-entry over the whole adult lifespan, not only its second quartile. The physiological responses of the older person to weightlessness and the return to Earth gravity are reviewed. The importance of the use of the weightless environment to solve critical problems in the fields of fundamental gerontology and geriatrics is also stressed.

  7. Strengthening health systems by health sector reforms

    PubMed Central

    Senkubuge, Flavia; Modisenyane, Moeketsi; Bishaw, Tewabech

    2014-01-01

    Background The rising burden of disease and weak health systems are being compounded by the persistent economic downturn, re-emerging diseases, and violent conflicts. There is a growing recognition that the global health agenda needs to shift from an emphasis on disease-specific approaches to strengthening of health systems, including dealing with social, environmental, and economic determinants through multisectoral responses. Methods A review and analysis of data on strengthening health sector reform and health systems was conducted. Attention was paid to the goal of health and interactions between health sector reforms and the functions of health systems. Further, we explored how these interactions contribute toward delivery of health services, equity, financial protection, and improved health. Findings Health sector reforms cannot be developed from a single global or regional policy formula. Any reform will depend on the country's history, values and culture, and the population's expectations. Some of the emerging ingredients that need to be explored are infusion of a health systems agenda; development of a comprehensive policy package for health sector reforms; improving alignment of planning and coordination; use of reliable data; engaging ‘street level’ policy implementers; strengthening governance and leadership; and allowing a holistic and developmental approach to reforms. Conclusions The process of reform needs a fundamental rather than merely an incremental and evolutionary change. Without radical structural and systemic changes, existing governance structures and management systems will continue to fail to address the existing health problems. PMID:24560261

  8. Feasibility study of an Integrated Program for Aerospace vehicle Design (IPAD). Volume 6: IPAD system development and operation

    NASA Technical Reports Server (NTRS)

    Redhed, D. D.; Tripp, L. L.; Kawaguchi, A. S.; Miller, R. E., Jr.

    1973-01-01

    The strategy of the IPAD implementation plan presented, proposes a three phase development of the IPAD system and technical modules, and the transfer of this capability from the development environment to the aerospace vehicle design environment. The system and technical module capabilities for each phase of development are described. The system and technical module programming languages are recommended as well as the initial host computer system hardware and operating system. The cost of developing the IPAD technology is estimated. A schedule displaying the flowtime required for each development task is given. A PERT chart gives the developmental relationships of each of the tasks and an estimate of the operational cost of the IPAD system is offered.

  9. Belarus: health system review.

    PubMed

    Richardson, Erica; Malakhova, Irina; Novik, Irina; Famenka, Andrei

    2013-01-01

    This analysis of the Belarusian health system reviews the developments in organization and governance, health financing, healthcare provision, health reforms and health system performance since 2008. Despite considerable change since independence, Belarus retains a commitment to the principle of universal access to health care, provided free at the point of use through predominantly state-owned facilities, organized hierarchically on a territorial basis. Incremental change, rather than radical reform, has also been the hallmark of health-care policy, although capitation funding has been introduced in some areas and there have been consistent efforts to strengthen the role of primary care. Issues of high costs in the hospital sector and of weaknesses in public health demonstrate the necessity of moving forward with the reform programme. The focus for future reform is on strengthening preventive services and improving the quality and efficiency of specialist services. The key challenges in achieving this involve reducing excess hospital capacity, strengthening health-care management, use of evidence-based treatment and diagnostic procedures, and the development of more efficient financing mechanisms. Involving all stakeholders in the development of further reform planning and achieving consensus among them will be key to its success.

  10. Mass spectrometry of aerospace materials

    NASA Technical Reports Server (NTRS)

    Colony, J. A.

    1976-01-01

    Mass spectrometry is used for chemical analysis of aerospace materials and contaminants. Years of analytical aerospace experience have resulted in the development of specialized techniques of sampling and analysis which are required in order to optimize results. This work has resulted in the evolution of a hybrid method of indexing mass spectra which include both the largest peaks and the structurally significant peaks in a concise format. With this system, a library of mass spectra of aerospace materials was assembled, including the materials responsible for 80 to 90 percent of the contamination problems at Goddard Space Flight Center during the past several years.

  11. Heat transfer in aerospace propulsion

    NASA Technical Reports Server (NTRS)

    Simoneau, Robert J.; Hendricks, Robert C.; Gladden, Herbert J.

    1988-01-01

    Presented is an overview of heat transfer related research in support of aerospace propulsion, particularly as seen from the perspective of the NASA Lewis Research Center. Aerospace propulsion is defined to cover the full spectrum from conventional aircraft power plants through the Aerospace Plane to space propulsion. The conventional subsonic/supersonic aircraft arena, whether commercial or military, relies on the turbine engine. A key characteristic of turbine engines is that they involve fundamentally unsteady flows which must be properly treated. Space propulsion is characterized by very demanding performance requirements which frequently push systems to their limits and demand tailored designs. The hypersonic flight propulsion systems are subject to severe heat loads and the engine and airframe are truly one entity. The impact of the special demands of each of these aerospace propulsion systems on heat transfer is explored.

  12. Japan's efforts to promote global health using satellite remote sensing data from the Japan Aerospace Exploration Agency for prediction of infectious diseases and air quality.

    PubMed

    Igarashi, Tamotsu; Kuze, Akihiko; Sobue, Shinichi; Yamamoto, Aya; Yamamoto, Kazuhide; Oyoshi, Kei; Imaoka, Keiji; Fukuda, Toru

    2014-12-01

    In this paper we review the status of new applications research of the Japanese Aerospace Exploration Agency (JAXA) for global health promotion using information derived from Earth observation data by satellites in cooperation with inter-disciplinary collaborators. Current research effort at JAXA to promote global public health is focused primarily on the use of remote sensing to address two themes: (i) prediction models for malaria and cholera in Kenya, Africa; and (ii) air quality assessment of small, particulate matter (PM2.5), nitrogen dioxide (NO2) and ozone (O3). Respiratory and cardivascular diseases constitute cross-boundary public health risk issues on a global scale. The authors report here on results of current of a collaborative research to call attention to the need to take preventive measures against threats to public health using newly arising remote sensing information from space.

  13. Recent advancement in optical fiber sensing for aerospace composite structures

    NASA Astrophysics Data System (ADS)

    Minakuchi, Shu; Takeda, Nobuo

    2013-12-01

    Optical fiber sensors have attracted considerable attention in health monitoring of aerospace composite structures. This paper briefly reviews our recent advancement mainly in Brillouin-based distributed sensing. Damage detection, life cycle monitoring and shape reconstruction systems applicable to large-scale composite structures are presented, and new technical concepts, "smart crack arrester" and "hierarchical sensing system", are described as well, highlighting the great potential of optical fiber sensors for the structural health monitoring (SHM) field.

  14. Greece: Health system review.

    PubMed

    Economou, Charalambos

    2010-01-01

    The Health Systems in Transition (HiT) profiles are country-based reports that provide a detailed description of a health system and of policy initiatives in progress or under development. HiTs examine different approaches to the organization, financing and delivery of health services and the role of the main actors in health systems; describe the institutional framework, process, content and implementation of health and health care policies; and highlight challenges and areas that require more in-depth analysis. The health status of the Greek population has strongly improved over the last few decades and seems to compare relatively favourably with other OECD and European Union (EU) countries. The health system is a mixture of public integrated, public contract and public reimbursement models, comprising elements from both the public and private sectors and incorporating principles of different organizational patterns. Access to services is based on citizenship as well as on occupational status.The system is financed by the state budget, social insurance contributions and private payments.The largest share of health expenditure constitutes private expenditure, mainly in the form of out of pocket payments which is also the element contributing most to the overall increase in health expenditure. The delivery of health care services is based on both public and private providers. The presence of private providers is more obvious in primary care,especially in diagnostic technologies, private physicians' practices and pharmaceuticals. Despite success in improving the health of the population, the Greek health care system faces serious structural problems concerning the organization, financing and delivery of services. It suffers from the absence of cost-containment measures and defined criteria for funding, resulting in sickness funds experiencing economic constraints and budget deficits. The high percentage of private expenditure goes against the principle of fair

  15. The Aerospace Age. Aerospace Education I.

    ERIC Educational Resources Information Center

    Smith, J. C.

    This book is written for use only in the Air Force ROTC program and cannot be purchased on the open market. The book describes the historical development of aerospace industry. The first chapter contains a brief review of the aerospace environment and the nature of technological changes brought by the aerospace revolution. The following chapter…

  16. Some cable suspension systems and their effects on the flexural frequencies of slender aerospace structures

    NASA Technical Reports Server (NTRS)

    Herr, R. W.

    1974-01-01

    The effects of several cable suspension configurations on the first free-free flexural frequency of uniform beams have been determined by experiment and analysis. The results of this study confirm that in general the larger the test vehicle the larger is the flexural frequency measurement error attributable to a given cable suspension configuration. For horizontally oriented beams representing modern aerospace vehicles of average size and flexibility, the restraining effects of all but the shortest support cables were minor. The restraining effects of support cables of moderate length attached near the base of vertically oriented vehicles were overshadowed by the effects of beam compression due to gravity.

  17. A generalized concept for cost-effective structural design. [Statistical Decision Theory applied to aerospace systems

    NASA Technical Reports Server (NTRS)

    Thomas, J. M.; Hawk, J. D.

    1975-01-01

    A generalized concept for cost-effective structural design is introduced. It is assumed that decisions affecting the cost effectiveness of aerospace structures fall into three basic categories: design, verification, and operation. Within these basic categories, certain decisions concerning items such as design configuration, safety factors, testing methods, and operational constraints are to be made. All or some of the variables affecting these decisions may be treated probabilistically. Bayesian statistical decision theory is used as the tool for determining the cost optimum decisions. A special case of the general problem is derived herein, and some very useful parametric curves are developed and applied to several sample structures.

  18. Norway: health system review.

    PubMed

    Ringard, Ånen; Sagan, Anna; Sperre Saunes, Ingrid; Lindahl, Anne Karin

    2013-01-01

    Norways five million inhabitants are spread over nearly four hundred thousand square kilometres, making it one of the most sparsely populated countries in Europe. It has enjoyed several decades of high growth, following the start of oil production in early 1970s, and is now one of the richest countries per head in the world. Overall, Norways population enjoys good health status; life expectancy of 81.53 years is above the EU average of 80.14, and the gap between overall life expectancy and healthy life years is around half the of EU average. The health care system is semi decentralized. The responsibility for specialist care lies with the state (administered by four Regional Health Authorities) and the municipalities are responsible for primary care. Although health care expenditure is only 9.4% of Norways GDP (placing it on the 16th place in the WHO European region), given Norways very high value of GDP per capita, its health expenditure per head is higher than in most countries. Public sources account for over 85% of total health expenditure; the majority of private health financing comes from households out-of-pocket payments.The number of practitioners in most health personnel groups, including physicians and nurses, has been increasing in the last few decades and the number of health care personnel per 100 000 inhabitants is high compared to other EU countries. However, long waiting times for elective care continue to be a problem and are cause of dissatisfaction among the patients. The focus of health care reforms has seen shifts over the past four decades. During the 1970s the focus was on equality and increasing geographical access to health care services; during the 1980s reforms aimed at achieving cost containment and decentralizing health care services; during the 1990s the focus was on efficiency. Since the beginning of the millennium the emphasis has been given to structural changes in the delivery and organization of health care and to policies

  19. M-Health: Emerging Mobile Health Systems

    NASA Astrophysics Data System (ADS)

    Istepanian, Robert; Laxminarayan, Swamy; Pattichis, Constantinos S.

    M-health can be defined as the "emerging mobile communications and network technologies for healthcare systems.' This book paves the path toward understanding the future of m-health technologies and services and also introducing the impact of mobility on existing e-health and commercial telemedical systems. M-Health: Emerging Mobile Health Systems presents a new and forward-looking source of information that explores the present and future trends in the applications of current and emerging wireless communication and network technologies for different healthcare scenaria.

  20. Results from simulation and flight testing of a HMD/FLIR system at Daimler-Benz Aerospace

    NASA Astrophysics Data System (ADS)

    Rumpf, Alexander J.; Heibei, Jurgen; Koehl, Franz

    1995-05-01

    Daimler-Benz Aerospace's Military Aircraft Division has investigated a HMD system in combination with a moveable FLIR integrated into a TORNADO fighter aircraft. That study was performed under a contract of the German MoD Research and Technology Program. The aim was to assess the systems suitability for enhancing situational awareness at night and for ground target acquisition and to deduct a specification for in series applications. For this purpose a low cost simulation environment was set up at Dasa and successfully used for system test, new symbol format development and evaluation, ergonomic assessment and initial pilot familiarization. Flight tests were conducted first in the rear cockpit of the TORNADO combat aircraft and later on in the front cockpit by test pilots from the German Official Test Center and from German Air Force and Navy tactical evaluation groups. Findings from simulation and flight testing in terms of ergonomic, flight medical, physiological and operation aspects will be reported.

  1. Spain: Health system review.

    PubMed

    García-Armesto, Sandra; Begoña Abadía-Taira, María; Durán, Antonio; Hernández-Quevedo, Cristina; Bernal-Delgado, Enrique

    2010-01-01

    The Health Systems in Transition (HiT) profiles are country-based reports that provide a detailed description of a health system and of policy initiatives in progress or under development. HiTs examine different approaches to the organization, financing and delivery of health services and the role of the main actors in health systems; describe the institutional framework, process, content and implementation of health and health care policies; and highlight challenges and areas that require more in-depth analysis. This edition of the Spanish HiT focuses on the consequences of the totally devolved status, consolidated in 2002, and the implementation of the road map established by the 2003 SNS Cohesion and Quality Act. Many of the steps already taken underline the improvement path chosen: the SNS Inter-territorial Council (CISNS) comprising the national and regional health ministries was upgraded to the highest SNS authority, paving the way for a brand new consensus-based policy-making process grounded in knowledge management; its effects are progressively starting to be evident. It led the way to the SNS common benefits basket or the SNS human resources policy framework, laying the cornerstones for coordination and the enactment of the SNS Quality Plan. The Plan includes the work in progress to implement the national health information system, the development of a single electronic clinical record (eCR) containing relevant clinical information guaranteeing to patients continuity of care outside their Autonomous Community (AC) of residence or a single patient ID to be used across the country, thus creating the basis for the SNS functional single insurer. It has also become one of the main drivers for the design, implementation and monitoring of quality standards across the SNS, developing national health strategies to tackle both most prevalent chronic diseases (e.g. cancer, cardiovascular diseases, diabetes) and rare diseases, as well as the National Strategy on

  2. PCSYS: The optimal design integration system picture drawing system with hidden line algorithm capability for aerospace vehicle configurations

    NASA Technical Reports Server (NTRS)

    Hague, D. S.; Vanderburg, J. D.

    1977-01-01

    A vehicle geometric definition based upon quadrilateral surface elements to produce realistic pictures of an aerospace vehicle. The PCSYS programs can be used to visually check geometric data input, monitor geometric perturbations, and to visualize the complex spatial inter-relationships between the internal and external vehicle components. PCSYS has two major component programs. The between program, IMAGE, draws a complex aerospace vehicle pictorial representation based on either an approximate but rapid hidden line algorithm or without any hidden line algorithm. The second program, HIDDEN, draws a vehicle representation using an accurate but time consuming hidden line algorithm.

  3. Wearable Health Monitoring Systems

    NASA Technical Reports Server (NTRS)

    Bell, John

    2015-01-01

    The shrinking size and weight of electronic circuitry has given rise to a new generation of smart clothing that enables biological data to be measured and transmitted. As the variation in the number and type of deployable devices and sensors increases, technology must allow their seamless integration so they can be electrically powered, operated, and recharged over a digital pathway. Nyx Illuminated Clothing Company has developed a lightweight health monitoring system that integrates medical sensors, electrodes, electrical connections, circuits, and a power supply into a single wearable assembly. The system is comfortable, bendable in three dimensions, durable, waterproof, and washable. The innovation will allow astronaut health monitoring in a variety of real-time scenarios, with data stored in digital memory for later use in a medical database. Potential commercial uses are numerous, as the technology enables medical personnel to noninvasively monitor patient vital signs in a multitude of health care settings and applications.

  4. Compilation and development of K-6 aerospace materials for implementation in NASA spacelink electronic information system

    NASA Technical Reports Server (NTRS)

    Blake, Jean A.

    1987-01-01

    Spacelink is an electronic information service to be operated by the Marshall Space Flight Center. It will provide NASA news and educational resources including software programs that can be accessed by anyone with a computer and modem. Spacelink is currently being installed and will soon begin service. It will provide daily updates of NASA programs, information about NASA educational services, manned space flight, unmanned space flight, aeronautics, NASA itself, lesson plans and activities, and space program spinoffs. Lesson plans and activities were extracted from existing NASA publications on aerospace activities for the elementary school. These materials were arranged into 206 documents which have been entered into the Spacelink program for use in grades K-6.

  5. Adhesives for Aerospace

    NASA Technical Reports Server (NTRS)

    Meade, L. E.

    1985-01-01

    The industry is hereby challenged to integrate adhesive technology with the total structure requirements in light of today's drive into automation/mechanization. The state of the art of adhesive technology is fairly well meeting the needs of the structural designers, the processing engineer, and the inspector, each on an individual basis. The total integration of these needs into the factory of the future is the next collective hurdle to be achieved. Improved processing parameters to fit the needs of automation/mechanization will necessitate some changes in the adhesive forms, formulations, and chemistries. Adhesives have, for the most part, kept up with the needs of the aerospace industry, normally leading the rest of the industry in developments. The wants of the aerospace industry still present a challenge to encompass all elements, achieving a totally integrated joined and sealed structural system. Better toughness with hot-wet strength improvements is desired. Lower cure temperatures, longer out times, and improved corrosion inhibition are desired.

  6. Croatia: health system review.

    PubMed

    Džakula, Aleksandar; Sagan, Anna; Pavić, Nika; Lonćčarek, Karmen; Sekelj-Kauzlarić, Katarina

    2014-01-01

    Croatia is a small central European country on the Balkan peninsula, with a population of approximately 4.3 million and a gross domestic product (GDP) of 62% of the European Union (EU) average (expressed in purchasing power parity; PPP) in 2012. On 1 July 2013, Croatia became the 28th Member State of the EU. Life expectancy at birth has been increasing steadily in Croatia (with a small decline in the years following the 1991 to 1995 War of Independence) but is still lower than the EU average. Prevalence of overweight and obesity in the population has increased during recent years and trends in physical inactivity are alarming. The Croatian Health Insurance Fund (CHIF), established in 1993, is the sole insurer in the mandatory health insurance (MHI) system that provides universal health coverage to the whole population. The ownership of secondary health care facilities is distributed between the State and the counties. The financial position of public hospitals is weak and recent reforms were aimed at improving this. The introduction of concessions in 2009 (public private partnerships whereby county governments organize tenders for the provision of specific primary health care services) allowed the counties to play a more active role in the organization, coordination and management of primary health care; most primary care practices have been privatized. The proportion of GDP spent on health by the Croatian government remains relatively low compared to western Europe, as does the per capita health expenditure. Although the share of public expenditure as a proportion of total health expenditure (THE) has been decreasing, at around 82% it is still relatively high, even by European standards. The main source of the CHIFs revenue is compulsory health insurance contributions, accounting for 76% of the total revenues of the CHIF, although only about a third of the population (active workers) is liable to pay full health care contributions. Although the breadth and scope

  7. Inductive System Health Monitoring

    NASA Technical Reports Server (NTRS)

    Iverson, David L.

    2004-01-01

    The Inductive Monitoring System (IMS) software was developed to provide a technique to automatically produce health monitoring knowledge bases for systems that are either difficult to model (simulate) with a computer or which require computer models that are too complex to use for real time monitoring. IMS uses nominal data sets collected either directly from the system or from simulations to build a knowledge base that can be used to detect anomalous behavior in the system. Machine learning and data mining techniques are used to characterize typical system behavior by extracting general classes of nominal data from archived data sets. IMS is able to monitor the system by comparing real time operational data with these classes. We present a description of learning and monitoring method used by IMS and summarize some recent IMS results.

  8. [The health system of Uruguay].

    PubMed

    Aran, Daniel; Laca, Hernán

    2011-01-01

    This paper describes the Uruguayan health system, including its structure and coverage, its financial sources, the level and distribution of its health expenditure, the physical, material and human resources available, its stewardship functions, the institutions in charge of information and research, and the level and type of citizen's participation in the operation and evaluation of the system. The most recent policy innovations are also discussed, including the creation of the National Comprehensive Health System, the National Health Insurance, the National Health Fund and the Comprehensive Health Care Program. Finally, the impact of these innovations in health expenditure, fairness of health financing, coverage levels and main health indicators is analyzed.

  9. Unification - An international aerospace information issue

    NASA Technical Reports Server (NTRS)

    Cotter, Gladys A.; Lahr, Thomas F.

    1992-01-01

    Scientific and Technical Information (STI) represents the results of large investments in research and development (R&D) and the expertise of a nation and is a valuable resource. For more than four decades, NASA and its predecessor organizations have developed and managed the preeminent aerospace information system. NASA obtains foreign materials through its international exchange relationships, continually increasing the comprehensiveness of the NASA Aerospace Database (NAD). The NAD is de facto the international aerospace database. This paper reviews current NASA goals and activities with a view toward maintaining compatibility among international aerospace information systems, eliminating duplication of effort, and sharing resources through international cooperation wherever possible.

  10. The 1975 NASA/ASEE summer faculty fellowship research program. [research in the areas of aerospace engineering, aerospace systems, and information systems

    NASA Technical Reports Server (NTRS)

    1975-01-01

    A research program was conducted to further the professional knowledge of qualified engineering and science faculty members, to stimulate an exchange of ideas between participants and NASA engineers and scientists, and to enrich the research activities of the participants' institutions. Abstracts of reports submitted at the end of the program are presented. Topics investigated include multispectral photography, logic circuits, gravitation theories, information systems, fracture mechanics, holographic interferometry, surface acoustic wave technology, ion beams in the upper atmosphere, and hybrid microcircuits.

  11. 75 FR 7405 - Airworthiness Directives; British Aerospace Regional Aircraft Model Jetstream Series 3101 and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-19

    ... Directives; British Aerospace Regional Aircraft Model Jetstream Series 3101 and Jetstream Model 3201... available in the AD docket shortly after receipt. FOR FURTHER INFORMATION CONTACT: Taylor Martin, Aerospace... AD docket. Relevant Service Information BAE Systems has issued British Aerospace Jetstream...

  12. 75 FR 12713 - Airworthiness Directives; AVOX Systems and B/E Aerospace Oxygen Cylinders as Installed on Various...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-17

    .../E Aerospace Oxygen Cylinders as Installed on Various 14 CFR Part 23 and CAR 3 Airplanes AGENCY... and B/E Aerospace oxygen cylinders, as installed on various 14 CFR part 23 or CAR 3 airplanes. This proposed AD would require inspecting for and removing substandard oxygen cylinders from the airplane....

  13. Health Information Systems.

    PubMed

    Sirintrapun, S Joseph; Artz, David R

    2015-06-01

    This article provides surgical pathologists an overview of health information systems (HISs): what they are, what they do, and how such systems relate to the practice of surgical pathology. Much of this article is dedicated to the electronic medical record. Information, in how it is captured, transmitted, and conveyed, drives the effectiveness of such electronic medical record functionalities. So critical is information from pathology in integrated clinical care that surgical pathologists are becoming gatekeepers of not only tissue but also information. Better understanding of HISs can empower surgical pathologists to become stakeholders who have an impact on the future direction of quality integrated clinical care.

  14. Health Information Systems.

    PubMed

    Sirintrapun, S Joseph; Artz, David R

    2016-03-01

    This article provides surgical pathologists an overview of health information systems (HISs): what they are, what they do, and how such systems relate to the practice of surgical pathology. Much of this article is dedicated to the electronic medical record. Information, in how it is captured, transmitted, and conveyed, drives the effectiveness of such electronic medical record functionalities. So critical is information from pathology in integrated clinical care that surgical pathologists are becoming gatekeepers of not only tissue but also information. Better understanding of HISs can empower surgical pathologists to become stakeholders who have an impact on the future direction of quality integrated clinical care.

  15. A Diagnostic Approach for Electro-Mechanical Actuators in Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Balaban, Edward; Saxena, Abhinav; Bansal, Prasun; Goebel, Kai Frank; Stoelting, Paul; Curran, Simon

    2009-01-01

    Electro-mechanical actuators (EMA) are finding increasing use in aerospace applications, especially with the trend towards all all-electric aircraft and spacecraft designs. However, electro-mechanical actuators still lack the knowledge base accumulated for other fielded actuator types, particularly with regard to fault detection and characterization. This paper presents a thorough analysis of some of the critical failure modes documented for EMAs and describes experiments conducted on detecting and isolating a subset of them. The list of failures has been prepared through an extensive Failure Modes and Criticality Analysis (FMECA) reference, literature review, and accessible industry experience. Methods for data acquisition and validation of algorithms on EMA test stands are described. A variety of condition indicators were developed that enabled detection, identification, and isolation among the various fault modes. A diagnostic algorithm based on an artificial neural network is shown to operate successfully using these condition indicators and furthermore, robustness of these diagnostic routines to sensor faults is demonstrated by showing their ability to distinguish between them and component failures. The paper concludes with a roadmap leading from this effort towards developing successful prognostic algorithms for electromechanical actuators.

  16. Research Developments in Nondestructive Evaluation and Structural Health Monitoring for the Sustainment of Composite Aerospace Structures at NASA

    NASA Technical Reports Server (NTRS)

    Cramer, K. Elliott

    2016-01-01

    The use of composite materials continues to increase in the aerospace community due to the potential benefits of reduced weight, increased strength, and manufacturability. Ongoing work at NASA involves the use of the large-scale composite structures for spacecraft (payload shrouds, cryotanks, crew modules, etc). NASA is also working to enable both the use and sustainment of composites in commercial aircraft structures. One key to the sustainment of these large composite structures is the rapid, in-situ characterization of a wide range of potential defects that may occur during the vehicle's life. Additionally, in many applications it is necessary to monitor changes in these materials over their lifetime. Quantitative characterization through Nondestructive Evaluation (NDE) of defects such as reduced bond strength, microcracking, and delamination damage due to impact, are of particular interest. This paper will present an overview of NASA's applications of NDE technologies being developed for the characterization and sustainment of advanced aerospace composites. The approaches presented include investigation of conventional, guided wave, and phase sensitive ultrasonic methods and infrared thermography techniques for NDE. Finally, the use of simulation tools for optimizing and validating these techniques will also be discussed.

  17. Training of aerospace medicine physicians.

    PubMed

    Mohler, S R

    1985-03-01

    In the U. S. there are 23 recognized medical specialty boards. One of these is preventive medicine. Within preventive medicine there are three areas: Aerospace Medicine, Occupational Medicine, and Public Health/General Preventive Medicine. The preventive medicine specialties have a common core of required training including biostatistics, epidemiology, health services administration and environmental health. These, plus associated topics are covered during year one of training. Year two of training involves clinical rotations specifically tailored to the eye, ear, heart, lungs and brain, plus flight training to the private pilot level, and a Masters Degree research project for the required thesis. During year three the physicians in aerospace medicine practice full-time aerospace medicine in a NASA or other government laboratory or a private facility. To date, more than 40 physicians have received aerospace medicine training through the Wright State University School of Medicine program. Among these are physicians from Japan, Australia, Taiwan, Canada and Mexico. In addition to the civilian program at Wright State University, there are programs conducted by the U. S. Air Force and Navy. The Wright State program has been privileged to have officers from the U. S. Army, Navy and Air Force. A substantial supporter of the Wright State program is the National Aeronautics and Space Administration and a strong space component is contained in the program.

  18. [The health system of Nicaragua].

    PubMed

    Muiser, Jorine; Sáenz, María del Rocío; Bermúdez, Juan Luis

    2011-01-01

    This paper describes the health conditions in Nicaragua and discusses the characteristics of its national health system including its structure and coverage, its financial sources its physical, material and human resources the stewardship functions developed by the Ministry of Health the participation of citizens in the operation and evaluation of the system and the level of satisfaction of health care users. It also discusses the most recent policy innovations, including the new General Health Law, the decentralization of the regulation of health facilities and the design and implementation of a new health care model known as Family and Community Health Model.

  19. An Aerospace Workshop

    ERIC Educational Resources Information Center

    Hill, Bill

    1972-01-01

    Describes the 16-day, 10,000 mile national tour of the nation's major aerospace research and development centers by 65 students enrolled in Central Washington State College's Summer Aerospace Workshop. (Author/MB)

  20. Global real-time dose measurements using the Automated Radiation Measurements for Aerospace Safety (ARMAS) system

    NASA Astrophysics Data System (ADS)

    Tobiska, W. Kent; Bouwer, D.; Smart, D.; Shea, M.; Bailey, J.; Didkovsky, L.; Judge, K.; Garrett, H.; Atwell, W.; Gersey, B.; Wilkins, R.; Rice, D.; Schunk, R.; Bell, D.; Mertens, C.; Xu, X.; Wiltberger, M.; Wiley, S.; Teets, E.; Jones, B.; Hong, S.; Yoon, K.

    2016-11-01

    The Automated Radiation Measurements for Aerospace Safety (ARMAS) program has successfully deployed a fleet of six instruments measuring the ambient radiation environment at commercial aircraft altitudes. ARMAS transmits real-time data to the ground and provides quality, tissue-relevant ambient dose equivalent rates with 5 min latency for dose rates on 213 flights up to 17.3 km (56,700 ft). We show five cases from different aircraft; the source particles are dominated by galactic cosmic rays but include particle fluxes for minor radiation periods and geomagnetically disturbed conditions. The measurements from 2013 to 2016 do not cover a period of time to quantify galactic cosmic rays' dependence on solar cycle variation and their effect on aviation radiation. However, we report on small radiation "clouds" in specific magnetic latitude regions and note that active geomagnetic, variable space weather conditions may sufficiently modify the magnetospheric magnetic field that can enhance the radiation environment, particularly at high altitudes and middle to high latitudes. When there is no significant space weather, high-latitude flights produce a dose rate analogous to a chest X-ray every 12.5 h, every 25 h for midlatitudes, and every 100 h for equatorial latitudes at typical commercial flight altitudes of 37,000 ft ( 11 km). The dose rate doubles every 2 km altitude increase, suggesting a radiation event management strategy for pilots or air traffic control; i.e., where event-driven radiation regions can be identified, they can be treated like volcanic ash clouds to achieve radiation safety goals with slightly lower flight altitudes or more equatorial flight paths.

  1. Aerospace Industry and Research. Aerospace Education II.

    ERIC Educational Resources Information Center

    Mackin, T. E.

    This book, to be used in the Air Force ROTC program only, discusses various aspects of the aerospace industry and its importance to the society. Not only does a modern and strong aerospace technology help in national defense, but it is a major economic industry as well. The vast number of people employed could shake the roots of economic…

  2. Development of Advanced Verification and Validation Procedures and Tools for the Certification of Learning Systems in Aerospace Applications

    NASA Technical Reports Server (NTRS)

    Jacklin, Stephen; Schumann, Johann; Gupta, Pramod; Richard, Michael; Guenther, Kurt; Soares, Fola

    2005-01-01

    Adaptive control technologies that incorporate learning algorithms have been proposed to enable automatic flight control and vehicle recovery, autonomous flight, and to maintain vehicle performance in the face of unknown, changing, or poorly defined operating environments. In order for adaptive control systems to be used in safety-critical aerospace applications, they must be proven to be highly safe and reliable. Rigorous methods for adaptive software verification and validation must be developed to ensure that control system software failures will not occur. Of central importance in this regard is the need to establish reliable methods that guarantee convergent learning, rapid convergence (learning) rate, and algorithm stability. This paper presents the major problems of adaptive control systems that use learning to improve performance. The paper then presents the major procedures and tools presently developed or currently being developed to enable the verification, validation, and ultimate certification of these adaptive control systems. These technologies include the application of automated program analysis methods, techniques to improve the learning process, analytical methods to verify stability, methods to automatically synthesize code, simulation and test methods, and tools to provide on-line software assurance.

  3. High Flight. Aerospace Activities, K-12.

    ERIC Educational Resources Information Center

    Oklahoma State Dept. of Education, Oklahoma City.

    Following discussions of Oklahoma aerospace history and the history of flight, interdisciplinary aerospace activities are presented. Each activity includes title, concept fostered, purpose, list of materials needed, and procedure(s). Topics include planets, the solar system, rockets, airplanes, air travel, space exploration, principles of flight,…

  4. Aerospace Power Technology for Potential Terrestrial Applications

    NASA Technical Reports Server (NTRS)

    Lyons, Valerie J.

    2012-01-01

    Aerospace technology that is being developed for space and aeronautical applications has great potential for providing technical advances for terrestrial power systems. Some recent accomplishments arising from activities being pursued at the National Aeronautics and Space Administration (NASA) Centers is described in this paper. Possible terrestrial applications of the new aerospace technology are also discussed.

  5. Optical Information Processing for Aerospace Applications 2

    NASA Technical Reports Server (NTRS)

    Stermer, R. L. (Compiler)

    1984-01-01

    Current research in optical processing, and determination of its role in future aerospace systems was reviewed. It is shown that optical processing offers significant potential for aircraft and spacecraft control, pattern recognition, and robotics. It is demonstrated that the development of optical devices and components can be implemented in practical aerospace configurations.

  6. Acoustic Emission Health Monitoring of Fill Purge COPV's Used in Aerospace and Automotive Applications and Designed for Long Cycle Life

    NASA Technical Reports Server (NTRS)

    Waller, Jess

    2013-01-01

    Cumulative composite damage in composite pressure vessels (CPVs) currently is not monitored on-orbit. Consequently, hazards due to catastrophic burst before leak (BBL) or compromised CPV reliability cannot be ascertained or mitigated, posing a risk to crew and mission assurance. The energy associated with CPV rupture can be significant, especially with high pressure gases are under containment, and the energy releases can be severe enough to cause injury, death, loss of assets or mission. Dual-Use Rationale: CPVs similar to those used by NASA on ISS, for example, are finding increasing use in automotive and transportation industry applications. These CPVs generally have a nonload sharing liner and are repeatedly filled over their service lifetime, typically with hydrogen or compressed natural gas (CNG). The same structural health monitoring equipment and software developed by NASA WSTF for evaluating, in real-time, the health of NASA CPVs on ISS will be used to evaluate the health of automotive CPVs, the only differences being the type and design of the CPV, and the in-service lifetime pressure histories. HSF Need(s)/Performance Characteristic(s) Supported: 1) Enable on-board vehicle systems management for mission critical functions at destinations with > 3 second time delay 2) Enable autonomous nominal operations and FDIR for crewed and un-crewed systems 3) Reduce on-board crew time to sustain and manage vehicle by factor of 2x at destinations with > 6 second time delay (see Crew Autonomy sheet) 4) Reduce earth-based mission ops "back room engineering" requirements for distant mission support delay (see Mission Autonomy sheet)

  7. Exploration of a Capability-Focused Aerospace System of Systems Architecture Alternative with Bilayer Design Space, Based on RST-SOM Algorithmic Methods

    PubMed Central

    Li, Zhifei; Qin, Dongliang

    2014-01-01

    In defense related programs, the use of capability-based analysis, design, and acquisition has been significant. In order to confront one of the most challenging features of a huge design space in capability based analysis (CBA), a literature review of design space exploration was first examined. Then, in the process of an aerospace system of systems design space exploration, a bilayer mapping method was put forward, based on the existing experimental and operating data. Finally, the feasibility of the foregoing approach was demonstrated with an illustrative example. With the data mining RST (rough sets theory) and SOM (self-organized mapping) techniques, the alternative to the aerospace system of systems architecture was mapping from P-space (performance space) to C-space (configuration space), and then from C-space to D-space (design space), respectively. Ultimately, the performance space was mapped to the design space, which completed the exploration and preliminary reduction of the entire design space. This method provides a computational analysis and implementation scheme for large-scale simulation. PMID:24790572

  8. Exploration of a capability-focused aerospace system of systems architecture alternative with bilayer design space, based on RST-SOM algorithmic methods.

    PubMed

    Li, Zhifei; Qin, Dongliang; Yang, Feng

    2014-01-01

    In defense related programs, the use of capability-based analysis, design, and acquisition has been significant. In order to confront one of the most challenging features of a huge design space in capability based analysis (CBA), a literature review of design space exploration was first examined. Then, in the process of an aerospace system of systems design space exploration, a bilayer mapping method was put forward, based on the existing experimental and operating data. Finally, the feasibility of the foregoing approach was demonstrated with an illustrative example. With the data mining RST (rough sets theory) and SOM (self-organized mapping) techniques, the alternative to the aerospace system of systems architecture was mapping from P-space (performance space) to C-space (configuration space), and then from C-space to D-space (design space), respectively. Ultimately, the performance space was mapped to the design space, which completed the exploration and preliminary reduction of the entire design space. This method provides a computational analysis and implementation scheme for large-scale simulation.

  9. Second Aerospace Environmental Technology Conference

    NASA Technical Reports Server (NTRS)

    Whitaker, A. F. (Editor); Clark-Ingram, M. (Editor)

    1997-01-01

    The mandated elimination of CFC'S, Halons, TCA, and other ozone depleting chemicals and specific hazardous materials has required changes and new developments in aerospace materials and processes. The aerospace industry has been involved for several years in providing product substitutions, redesigning entire production processes, and developing new materials that minimize or eliminate damage to the environment. These activities emphasize replacement cleaning solvents and their application, verification, compliant coatings including corrosion protection system and removal techniques, chemical propulsion effects on the environment, and the initiation of modifications to relevant processing and manufacturing specifications and standards.

  10. Computers and the aerospace engineer

    SciTech Connect

    Trego, L.E.

    1990-03-01

    The use of computers in aerospace for design and analysis is described, and examples of project enhancements are presented. NASA is working toward the design of a numerical test cell that will allow integrated, multidisciplinary design, analysis, and optimization of propulsion systems. It is noted that with continuing advances in computer technology, including areas such as three-dimensional computer-aided design, finite element analysis, supercomputers, and artificial intelligence, the possibilities seem limitless for the aerospace engineer. Research projects are currently underway for design and/or reconfiguration of the V-22, B-767, SCRAMJET engines, F-16, and X29A using these techniques.

  11. Second Aerospace Environmental Technology Conference

    NASA Technical Reports Server (NTRS)

    Whitaker, A. F.; Clark-Ingram, M.; Hessler, S. L.

    1997-01-01

    The mandated elimination of CFC's, Halons, TCA, and other ozone depleting chemicals and specific hazardous materials has required changes and new developments in aerospace materials and processes. The aerospace industry has been involved for several years in providing product substitutions, redesigning entire production processes, and developing new materials that minimize or eliminate damage to the environment. These activities emphasize replacement cleaning solvents and their application verifications, compliant coatings including corrosion protection systems, and removal techniques, chemical propulsion effects on the environment, and the initiation of modifications to relevant processing and manufacturing specifications and standards.

  12. [The health system of Colombia].

    PubMed

    Guerrero, Ramiro; Gallego, Ana Isabel; Becerril-Montekio, Victor; Vásquez, Johanna

    2011-01-01

    This document briefly describes the health conditions of the Colombian population and, in more detail, the characteristics of the Colombian health system. The description of the system includes its structure and coverage; financing sources; expenditure in health; physical material and human resources available; monitoring and evaluation procedures; and mechanisms through which the population participates in the evaluation of the system. Salient among the most recent innovations implemented in the Colombian health system are the modification of the Compulsory Health Plan and the capitation payment unit, the vertical integration of the health promotion enterprises and the institutions in charge of the provision of services and the mobilization of additional resources to meet the objectives of universal coverage and the homologation of health benefits among health regimes.

  13. [The health system of Ecuador].

    PubMed

    Lucio, Ruth; Villacrés, Nilhda; Henríquez, Rodrigo

    2011-01-01

    This paper describes the health conditions in Ecuador and, in more detail, the characteristics of the Ecuadorian health system, including its structure and coverage, its financial sources, the physical, material and human resources available, and the stewardship activities developed by the Ministry of Public Health. It also describes the structure and content of its health information system, and the participation of citizens in the operation and evaluation of the health system. The paper ends with a discussion of the most recent policy innovations implemented in the Ecuadorian system, including the incorporation of a chapter on health into the new Constitution which recognizes the protection of health as a human right, and the construction of the Comprehensive Public Health Network.

  14. [The health system of Peru].

    PubMed

    Alcalde-Rabanal, Jacqueline Elizabeth; Lazo-González, Oswaldo; Nigenda, Gustavo

    2011-01-01

    This paper describes the health conditions in Peru and, with greater detail, the Peruvian health system, including its structure and coverage, its financial sources, its physical, material and human resources, and its stewardship functions. It also discusses the activities developed in the information and research areas, as well as the participation of citizens in the operation and evaluation of the health system. The article concludes with a discussion of the most recent innovations, including the Comprehensive Health Insurance, the Health Care Enterprises system, the decentralization process and the Local Committees for Health Administration. The main challenge confronted by the Peruvian health system is the extension of coverage to more than I0% of the population presently lacking access to basic health care.

  15. Feasibility study of an Integrated Program for Aerospace-vehicle Design (IPAD) system. Volume 1: Summary

    NASA Technical Reports Server (NTRS)

    Garrocq, C. A.; Hurley, M. J.

    1973-01-01

    An overview is provided of the Ipad System, including its goals and objectives, organization, capabilities and future usefulness. The systems implementation is also presented with operational cost summaries.

  16. 76 FR 41041 - Special Conditions: Gulfstream Aerospace LP (GALP) Model G250 Airplane, Interaction of Systems...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-13

    ... automatic systems may be inoperative or may operate in a degraded mode with less than full- system authority... have failure modes that allow the system to function in a degraded mode without full authority. These degraded modes are not readily detectable by the flightcrew, therefore monitoring systems are required...

  17. Innovative requirements and technologies for future RLVs health management system

    NASA Astrophysics Data System (ADS)

    Maltecca, L.; Miccichè, L.; Russo, G.; Sellitto, M.

    2002-07-01

    The Italian aerospace research program PRORA (PROgramma nazionale di Ricerche Aerospaziali), which has been conceived and managed by CIRA (Italian Aerospace Research Center), is focused on the development of innovative technologies, also based on experience from flying test beds. One family of these test beds, designated USV (Unmanned Space Vehicle) will be dedicated to acquire the knowledge about future RLV (Reusable Launch Vehicle) technologies. Major strategic technologies identified are reusability, hypersonic flight and atmospheric re-entry. The Phase-A study has been concluded and recently approved. Laben (a Finmeccanica Company) has contributed to identify requirements for the next generations of on board Vehicle Health Management System (VHMS) and to investigate possible innovative architectures. This new generation VHMS will be able to manage in a real-time mode the health of the vehicle (structure, propulsion, avionics, etc.). The proposed approach is based on a set of decentralised computers linked via an advanced high-speed interconnect system. This paper will describe preliminary requirements analysis and trade-off's mainly in terms of HW (e.g. use of general purpose CPUs versus DSPs, interconnects and topologies).

  18. [The health system of Mexico].

    PubMed

    Gómez Dantés, Octavio; Sesma, Sergio; Becerril, Victor M; Knaul, Felicia M; Arreola, Héctor; Frenk, Julio

    2011-01-01

    This paper describes the Mexican health system. In part one, the health conditions of the Mexican population are discussed, with emphasis in those emerging diseases that are now the main causes of death, both in men and women: diabetes, ischaemic heart disease, cerebrovascular diseases and cancer. Part two is devoted to the description of the basic structure of the system: its main institutions, the population coverage, the health benefits of those affiliated to the different heath institutions, its financial sources, the levels of financial protection in health, the availability of physical, material and human resources for health, and the stewardship functions displayed by the Ministry of Health and other actors. This part also discusses the role of citizens in the monitorization and evaluation of the health system, as well as the levels of satisfaction with the rendered health services. In part three the most recent innovations and its impact on the performance of the health system are discussed. Salient among them are the System of Social Protection in Health and the Popular Health Insurance. The paper concludes with a brief analysis of the short- and middle-term challenges faced by the Mexican health system.

  19. Ceramic composites: Enabling aerospace materials

    NASA Technical Reports Server (NTRS)

    Levine, S. R.

    1992-01-01

    Ceramics and ceramic matrix composites (CMC) have the potential for significant impact on the performance of aerospace propulsion and power systems. In this paper, the potential benefits are discussed in broad qualitative terms and are illustrated by some specific application case studies. The key issues in need of resolution for the potential of ceramics to be realized are discussed.

  20. Graphical simulation for aerospace manufacturing

    NASA Technical Reports Server (NTRS)

    Babai, Majid; Bien, Christopher

    1994-01-01

    Simulation software has become a key technological enabler for integrating flexible manufacturing systems and streamlining the overall aerospace manufacturing process. In particular, robot simulation and offline programming software is being credited for reducing down time and labor cost, while boosting quality and significantly increasing productivity.

  1. Aerospace applications of magnetic bearings

    NASA Technical Reports Server (NTRS)

    Downer, James; Goldie, James; Gondhalekar, Vijay; Hockney, Richard

    1994-01-01

    Magnetic bearings have traditionally been considered for use in aerospace applications only where performance advantages have been the primary, if not only, consideration. Conventional wisdom has been that magnetic bearings have certain performance advantages which must be traded off against increased weight, volume, electric power consumption, and system complexity. These perceptions have hampered the use of magnetic bearings in many aerospace applications because weight, volume, and power are almost always primary considerations. This paper will review progress on several active aerospace magnetic bearings programs at SatCon Technology Corporation. The magnetic bearing programs at SatCon cover a broad spectrum of applications including: a magnetically-suspended spacecraft integrated power and attitude control system (IPACS), a magnetically-suspended momentum wheel, magnetic bearings for the gas generator rotor of a turboshaft engine, a vibration-attenuating magnetic bearing system for an airborne telescope, and magnetic bearings for the compressor of a space-rated heat pump system. The emphasis of these programs is to develop magnetic bearing technologies to the point where magnetic bearings can be truly useful, reliable, and well tested components for the aerospace community.

  2. Aerospace applications of magnetic bearings

    NASA Astrophysics Data System (ADS)

    Downer, James; Goldie, James; Gondhalekar, Vijay; Hockney, Richard

    1994-05-01

    Magnetic bearings have traditionally been considered for use in aerospace applications only where performance advantages have been the primary, if not only, consideration. Conventional wisdom has been that magnetic bearings have certain performance advantages which must be traded off against increased weight, volume, electric power consumption, and system complexity. These perceptions have hampered the use of magnetic bearings in many aerospace applications because weight, volume, and power are almost always primary considerations. This paper will review progress on several active aerospace magnetic bearings programs at SatCon Technology Corporation. The magnetic bearing programs at SatCon cover a broad spectrum of applications including: a magnetically-suspended spacecraft integrated power and attitude control system (IPACS), a magnetically-suspended momentum wheel, magnetic bearings for the gas generator rotor of a turboshaft engine, a vibration-attenuating magnetic bearing system for an airborne telescope, and magnetic bearings for the compressor of a space-rated heat pump system. The emphasis of these programs is to develop magnetic bearing technologies to the point where magnetic bearings can be truly useful, reliable, and well tested components for the aerospace community.

  3. 41st Aerospace Mechanisms Symposium

    NASA Technical Reports Server (NTRS)

    Boesiger, Edward A. (Editor)

    2012-01-01

    The proceedings of the 41st Aerospace Mechanisms Symposium are reported. JPL hosted the conference, which was held in Pasadena Hilton, Pasadena, California on May 16-18, 2012. Lockheed Martin Space Systems cosponsored the symposium. Technology areas covered include gimbals and positioning mechanisms, components such as hinges and motors, CubeSats, tribology, and Mars Science Laboratory mechanisms.

  4. United Kingdom: Health System Review.

    PubMed

    Cylus, Jonathan; Richardson, Erica; Findley, Lisa; Longley, Marcus; O'Neill, Ciaran; Steel, David

    2015-01-01

    This analysis of the United Kingdom health system reviews recent developments in organization and governance, health financing, health care provision, health reforms and health system performance. It provides an overview of how the national health services operate in the four nations that make up the United Kingdom, as responsibility for organizing health financing and services was devolved from 1997. With devolution, the health systems in the United Kingdom have diverged in the details of how services are organized and paid for, but all have maintained national health services which provide universal access to a comprehensive package of services that are mostly free at the point of use. These health services are predominantly financed from general taxation and 83.5% of total health expenditure in the United Kingdom came from public sources in 2013. Life expectancy has increased steadily across the United Kingdom, but health inequalities have proved stubbornly resistant to improvement, and the gap between the most deprived and the most privileged continues to widen, rather than close. The United Kingdom faces challenges going forward, including how to cope with the needs of an ageing population, how to manage populations with poor health behaviours and associated chronic conditions, how to meet patient expectations of access to the latest available medicines and technologies, and how to adapt a system that has limited resources to expand its workforce and infrastructural capacity so it can rise to these challenges.

  5. NASA Non-Flow-Through PEM Fuel Cell System for Aerospace Applications

    NASA Technical Reports Server (NTRS)

    Araghi, Koorosh R.

    2011-01-01

    NASA is researching passive NFT Proton Exchange Membrane (PEM) fuel cell technologies for primary fuel cell power plants in air-independent applications. NFT fuel cell power systems have a higher power density than flow through systems due to both reduced parasitic loads and lower system mass and volume. Reactant storage still dominates system mass/volume considerations. NFT fuel cell stack testing has demonstrated equivalent short term performance to flow through stacks. More testing is required to evaluate long-term performance.

  6. Technology Maturation of Integrated System Health Management

    NASA Astrophysics Data System (ADS)

    Feather, Martin S.; Uckun, Serdar; Hicks, Kenneth A.

    2008-01-01

    Despite two decades of significant investments in R&D of Integrated System Health Management (ISHM), mission-critical applications of it in aerospace are few and far between. ISHM is subject to the general difficulty of transitioning technologies out of R&D labs and into practical applications. New and unproven methods such as ISHM introduce multiple mission risks (technology, schedule, cost), and may require a transition to unconventional and as-yet-unproven operations concepts in order to be effective. Laboratory and flight demonstrations are necessary but insufficient to adequately reduce those risks. What is needed is a solid business case before a new technology can be considered for fleetwide deployment. To address these problems, we recently applied a technology maturation assessment process developed at NASA's Jet Propulsion Laboratory to study the challenges of ISHM technology maturation. This application resulted in identification of the technologies (and technology maturation activities) that would result in the greatest risk reduction per investment dollar. Our approach and its results are described herein.

  7. Dynamics of aerospace vehicles

    NASA Technical Reports Server (NTRS)

    Schmidt, David K.

    1991-01-01

    The focus of this research was to address the modeling, including model reduction, of flexible aerospace vehicles, with special emphasis on models used in dynamic analysis and/or guidance and control system design. In the modeling, it is critical that the key aspects of the system being modeled be captured in the model. In this work, therefore, aspects of the vehicle dynamics critical to control design were important. In this regard, fundamental contributions were made in the areas of stability robustness analysis techniques, model reduction techniques, and literal approximations for key dynamic characteristics of flexible vehicles. All these areas are related. In the development of a model, approximations are always involved, so control systems designed using these models must be robust against uncertainties in these models.

  8. Design and fabrication of metallic thermal protection systems for aerospace vehicles

    NASA Technical Reports Server (NTRS)

    Varisco, A.; Bell, P.; Wolter, W.

    1978-01-01

    A program was conducted to develop a lightweight, efficient metallic thermal protection system (TPS) for application to future shuttle-type reentry vehicles, advanced space transports, and hypersonic cruise vehicles. Technical requirements were generally derived from the space shuttle. A corrugation-stiffened beaded-skin TPS design was used as a baseline. The system was updated and modified to incorporate the latest technology developments and design criteria. The primary objective was to minimize mass for the total system.

  9. Resilience Engineering in Critical Long Term Aerospace Software Systems: A New Approach to Spacecraft Software Safety

    NASA Astrophysics Data System (ADS)

    Dulo, D. A.

    Safety critical software systems permeate spacecraft, and in a long term venture like a starship would be pervasive in every system of the spacecraft. Yet software failure today continues to plague both the systems and the organizations that develop them resulting in the loss of life, time, money, and valuable system platforms. A starship cannot afford this type of software failure in long journeys away from home. A single software failure could have catastrophic results for the spaceship and the crew onboard. This paper will offer a new approach to developing safe reliable software systems through focusing not on the traditional safety/reliability engineering paradigms but rather by focusing on a new paradigm: Resilience and Failure Obviation Engineering. The foremost objective of this approach is the obviation of failure, coupled with the ability of a software system to prevent or adapt to complex changing conditions in real time as a safety valve should failure occur to ensure safe system continuity. Through this approach, safety is ensured through foresight to anticipate failure and to adapt to risk in real time before failure occurs. In a starship, this type of software engineering is vital. Through software developed in a resilient manner, a starship would have reduced or eliminated software failure, and would have the ability to rapidly adapt should a software system become unstable or unsafe. As a result, long term software safety, reliability, and resilience would be present for a successful long term starship mission.

  10. Data bases and data base systems related to NASA's Aerospace Program: A bibliography with indexes

    NASA Technical Reports Server (NTRS)

    1983-01-01

    This bibliography lists 641 reports, articles, and other documents introduced into the NASA scientific and technical information system during the period January 1, 1981 through June 30, 1982. The directory was compiled to assist in the location of numerical and factual data bases and data base handling and management systems.

  11. Application of intelligent robotic welding systems for fabrication of aerospace hardware

    NASA Technical Reports Server (NTRS)

    Jones, C. S.; Watson, J. K.

    1985-01-01

    The application of robots to complex on-orbit tasks will require a high degree of adaptability. This paper describes a project which is developing very adaptive robotic systems for welding of the Space Shuttle main engine. A number of the developments which will arise from this program will serve as useful starting points for more advanced systems to be used on-orbit.

  12. [Economics of health system transformation].

    PubMed

    González Pier, Eduardo

    2012-01-01

    Health conditions in Mexico have evolved along with socioeconomic conditions. As a result, today's health system faces several problems characterized by four overlapping transitions: demand, expectations, funding and health resources. These transitions engender significant pressures on the system itself. Additionally, fragmentation of the health system creates disparities in access to services and generates problems in terms of efficiency and use of available resources. To address these complications and to improve equity in access and efficiency, thorough analysis is required in how the right to access health care should be established at a constitutional level without differentiating across population groups. This should be followed by careful discussion about what rules of health care financing should exist, which set of interventions ought to be covered and how services must be organized to meet the health needs of the population.

  13. Applications of integrated design/analysis systems in aerospace structural design

    NASA Technical Reports Server (NTRS)

    Mason, Philip; Lerner, Edwin; Sobel, Lawrence

    1989-01-01

    Integrated structural analysis and design systems and structural optimization procedures are being used in a production environment. Successful use of these systems requires experienced personnel. Interactive computer graphics can and will play a significant role in the analysis, optimization, design and manufacturing areas. Practical structural optimization procedures are tools that must be made available to the team. Much work still needs to be done to tie finite-element modeling to actual design details which are being tracked on systems such as CADAM or CATIA. More work needs to be done to automate the detailed design and analysis process. More emphasis should be placed on the real design problems.

  14. A Data Acquisition System (DAS) for marine and ecological research from aerospace technology

    NASA Technical Reports Server (NTRS)

    Johnson, R. A.

    1972-01-01

    The efforts of researchers at Mississippi State University to utilize space-age technology in the development of a self-contained, portable data acquisition system for use in marine and ecological research are presented. The compact, lightweight data acquisition system is capable of recording 14 variables in its present configuration and is suitable for use in either a boat, pickup truck, or light aircraft. This system will provide the acquisition of reliable data on the structure of the environment and the effect of man-made and natural activities on the observed phenomenon. Utilizing both self-contained analog recording and a telemetry transmitter for real-time digital readout and recording, the prototype system has undergone extensive testing.

  15. The Search for Nonflammable Solvent Alternatives for Cleaning Aerospace Oxygen Systems

    NASA Technical Reports Server (NTRS)

    Mitchell, Mark A.; Lowrey, Nikki

    2012-01-01

    To obtain a high degree of cleanliness without risk of corrosion or hazardous reactivity, hydrochlorofluorocarbon (HCFC)-225 is used for cleaning and cleanliness verification of oxygen system components used on NASA fs bipropellant launch vehicles, associated test stands and support equipment. HCFC-225 is a Class II Ozone Depleting Substance (ODS ]II) that was introduced to replace chlorofluorocarbon (CFC)-113, a Class I ODS solvent that is now banned. To meet environmental regulations to eliminate the use of ozone depleting substances, a replacement solvent is required for HCFC ]225 that is effective at removing oils, greases, and particulate from large oxygen system components, is compatible with materials used in the construction of these systems, and is nonflammable and non ]reactive in enriched oxygen environments. A solvent replacement is also required for aviator fs breathing oxygen systems and other related equipment currently cleaned and verified with HCFC ]225 and stockpiled CFC -113. Requirements and challenges in the search for nonflammable replacement solvents are discussed.

  16. Control system estimation and design for aerospace vehicles with time delay

    NASA Technical Reports Server (NTRS)

    Allgaier, G. R.; Williams, T. L.

    1972-01-01

    The problems of estimation and control of discrete, linear, time-varying systems are considered. Previous solutions to these problems involved either approximate techniques, open-loop control solutions, or results which required excessive computation. The estimation problem is solved by two different methods, both of which yield the identical algorithm for determining the optimal filter. The partitioned results achieve a substantial reduction in computation time and storage requirements over the expanded solution, however. The results reduce to the Kalman filter when no delays are present in the system. The control problem is also solved by two different methods, both of which yield identical algorithms for determining the optimal control gains. The stochastic control is shown to be identical to the deterministic control, thus extending the separation principle to time delay systems. The results obtained reduce to the familiar optimal control solution when no time delays are present in the system.

  17. NASA Workshop on Distributed Parameter Modeling and Control of Flexible Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Marks, Virginia B. (Compiler); Keckler, Claude R. (Compiler)

    1994-01-01

    Although significant advances have been made in modeling and controlling flexible systems, there remains a need for improvements in model accuracy and in control performance. The finite element models of flexible systems are unduly complex and are almost intractable to optimum parameter estimation for refinement using experimental data. Distributed parameter or continuum modeling offers some advantages and some challenges in both modeling and control. Continuum models often result in a significantly reduced number of model parameters, thereby enabling optimum parameter estimation. The dynamic equations of motion of continuum models provide the advantage of allowing the embedding of the control system dynamics, thus forming a complete set of system dynamics. There is also increased insight provided by the continuum model approach.

  18. Application of the Man-computer Interactive Data Access System (McIDAS) to aerospace meteorology

    NASA Technical Reports Server (NTRS)

    Meyer, P. J.

    1985-01-01

    The Man-computer Interactive Data Access System (McIDAS) considered in this paper has been in use at Marshall Space Flight Center (MSFC) since 1981. The MSFC McIDAS system is primarily employed as a research tool, taking into account rainfall estimates as deduced from Scanning Multichannel Microwave Radiometer (SMMR) data, remote sensing sensor development (MAMS), Doppler-lidar derived winds, cloud tracked winds, and analysis of lightning ground strike data. With respect to the SMMR data analysis, passive microwave satellite data are displayed on McIDAS as images. Two major research efforts are concerned with the determination of mesoscale winds. These efforts are based on a utilization of a Doppler-lidar system, and GOES multispectral imagery. It is pointed out that future plans include increased usage of the McIDAS system.

  19. Aerospace Applications of Microprocessors

    NASA Technical Reports Server (NTRS)

    1980-01-01

    An assessment of the state of microprocessor applications is presented. Current and future requirements and associated technological advances which allow effective exploitation in aerospace applications are discussed.

  20. The Search for Nonflammable Solvent Alternatives for Cleaning Aerospace Oxygen Systems

    NASA Technical Reports Server (NTRS)

    Mitchell, Mark; Lowrey, Nikki

    2012-01-01

    Oxygen systems are susceptible to fires caused by particle and nonvolatile residue (NVR) contaminants, therefore cleaning and verification is essential for system safety. . Cleaning solvents used on oxygen system components must be either nonflammable in pure oxygen or complete removal must be assured for system safety. . CFC -113 was the solvent of choice before 1996 because it was effective, least toxic, compatible with most materials of construction, and non ]reactive with oxygen. When CFC -113 was phased out in 1996, HCFC -225 was selected as an interim replacement for cleaning propulsion oxygen systems at NASA. HCFC-225 production phase-out date is 01/01/2015. HCFC ]225 (AK ]225G) is used extensively at Marshall Space Flight Center and Stennis Space Center for cleaning and NVR verification on large propulsion oxygen systems, and propulsion test stands and ground support equipment. . Many components are too large for ultrasonic agitation - necessary for effective aqueous cleaning and NVR sampling. . Test stand equipment must be cleaned prior to installation of test hardware. Many items must be cleaned by wipe or flush in situ where complete removal of a flammable solvent cannot be assured. The search for a replacement solvent for these applications is ongoing.

  1. Toward Co-Design of Autonomous Aerospace Cyber-Physical Systems

    NASA Astrophysics Data System (ADS)

    Bradley, Justin M.

    Modern vehicles are equipped with a complex suite of computing (cyber) and electromechanical (physical) systems. Holistic design, modeling, and optimization of such Cyber-Physical Systems (CPS) requires new techniques capable of integrated analysis across the full CPS. This dissertations introduces two methods for balancing cyber and physical resources in a step toward holistic co-design of CPS. First, an ordinary differential equation model abstraction of controller sampling rate is developed and added to the equations of motion of a physical system to form a holistic discrete-time-varying linear system representing the CPS controller. Using feedback control, this cyber effector, sampling rate, is then co-regulated alongside physical effectors in response to physical system tracking error. This technique is applied to a spring-mass-damper, inverted pendulum, and finally to attitude control of a small satellite (CubeSat). Additionally, two new controllers for discrete-time-varying systems are introduced; a gain-scheduled discrete-time linear regulator (DLQR) in which DLQR gains are scheduled over time-varying sampling rates, and a forward-propagation Riccati-based (FPRB) controller. The FPRB CPS controller shows promise in balancing cyber and physical resources. Second, we propose a cost function of cyber and physical parameters to optimize an Unmanned Aircraft System (UAS) trajectory for a pipeline surveillance mission. Optimization parameters are UAV velocity and mission-critical surveillance task execution rate. Metrics for pipeline image information, energy, cyber utilization, and time comprise the cost function and Pareto fronts are analyzed to gain insight into cyber and physical tradeoffs for mission success. Finally, the cost function is optimized using numerical methods, and results from several cost weightings and Pareto front analyses are tabulated. We show that increased mission success can be achieved by considering both cyber and physical parameters

  2. Czech Republic: health system review.

    PubMed

    Alexa, Jan; Recka, Lukas; Votapkova, Jana; van Ginneken, Ewout; Spranger, Anne; Wittenbecher, Friedrich

    2015-01-01

    This analysis of the Czech health system reviews recent developments in organization and governance, health financing, health-care provision, health reforms and health system performance. The Czech health-care system is based on compulsory statutory health insurance providing virtually universal coverage and a broad range of benefits, and doing so at 7.7 % of GDP in 2012 - well below the EU average - of which a comparatively high 85 % was publicly funded. Some important health indicators are better than the EU averages (such as mortality due to respiratory disease) or even among the best in the world (in terms of infant mortality, for example). On the other hand, mortality rates for diseases of the circulatory system and malignant neoplasms are well above the EU average, as are a range of health-care utilization rates, such as outpatient contacts and average length of stay in acute care hospitals. In short, there is substantial potential in the Czech Republic for efficiency gains and to improve health outcomes. Furthermore, the need for reform in order to financially sustain the system became evident again after the global financial crisis, but there is as yet no consensus about how to achieve this.

  3. KRON's Method Applied to the Study of Electromagnetic Interference Occurring in Aerospace Systems

    NASA Astrophysics Data System (ADS)

    Leman, S.; Reineix, A.; Hoeppe, F.; Poiré, Y.; Mahoudi, M.; Démoulin, B.; Üstüner, F.; Rodriquez, V. P.

    2012-05-01

    In this paper, spacecraft and aircraft mock-ups are used to simulate the performance of KRON based tools applied to the simulation of large EMC systems. These tools aim to assist engineers in the design phase of complex systems. This is done by effectively evaluating the EM disturbances between antennas, electronic equipment, and Portable Electronic Devices found in large systems. We use a topological analysis of the system to model independent sub-volumes such as antennas, cables, equipments, PED and cavity walls. Each of these sub- volumes is modelled by an appropriate method which can be based on, for example, analytical expressions, transmission line theory or other numerical tools such as the full wave FDFD method. This representation associated with the electrical tensorial method of G.KRON leads to reasonable simulation times (typically a few minutes) and accurate results. Because equivalent sub-models are built separately, the main originality of this method is that each sub- volume can be easily replaced by another one without rebuilding the entire system. Comparisons between measurements and simulations will be also presented.

  4. System engineering of aerospace and advanced technology programs at an astronautics company (record of study)

    NASA Astrophysics Data System (ADS)

    Kennedy, Mike O.

    An internship with the Martin Marietta Astronautics Group that was performed in partial fulfillment of the requirements for the Doctor of Engineering degree is documented. The internship included assignments with two Martin Marietta companies, on three different programs and in four areas of engineering. A first-hand look is taken at system engineering, SDI and advanced program management, and the way Martin Marietta conducts business. The five internship objectives were related to assignments in system modeling, system integration, engineering analysis and technical management: (1) The effects of thermally and mechanically induced mirror surface distortions upon the wavefront intensity field of a high energy laser beam passing through the optical train of a space-based laser system were modeled. (2) The restrictive as opposed to the broad interpretation of the 1972 ABM Treaty, and the capability of the Strategic Defense Initiative Zenith Star Program to comply with the Treaty were evaluated. (3) The capability of Martin Marietta to develop an automated analysis system to integrate and analyze Superconducting Super Collider detector designs was investigated. (4) The thermal models that were developed in support of the Small Intercontinental Ballistic Missile flight tests were described. (5) The technical management role of the Product Integrity Engineer assigned to the Zenith Star spacecraft's Beam Control and Transfer Subsystem was discussed. The relationships between the engineering, business, security and social concerns associated with the practice of engineering and the management of programs by a major defense contractor are explored.

  5. Intelligent Wireless Sensor Networks for System Health Monitoring

    NASA Technical Reports Server (NTRS)

    Alena, Rick

    2011-01-01

    Wireless sensor networks (WSN) based on the IEEE 802.15.4 Personal Area Network (PAN) standard are finding increasing use in the home automation and emerging smart energy markets. The network and application layers, based on the ZigBee 2007 Standard, provide a convenient framework for component-based software that supports customer solutions from multiple vendors. WSNs provide the inherent fault tolerance required for aerospace applications. The Discovery and Systems Health Group at NASA Ames Research Center has been developing WSN technology for use aboard aircraft and spacecraft for System Health Monitoring of structures and life support systems using funding from the NASA Engineering and Safety Center and Exploration Technology Development and Demonstration Program. This technology provides key advantages for low-power, low-cost ancillary sensing systems particularly across pressure interfaces and in areas where it is difficult to run wires. Intelligence for sensor networks could be defined as the capability of forming dynamic sensor networks, allowing high-level application software to identify and address any sensor that joined the network without the use of any centralized database defining the sensors characteristics. The IEEE 1451 Standard defines methods for the management of intelligent sensor systems and the IEEE 1451.4 section defines Transducer Electronic Datasheets (TEDS), which contain key information regarding the sensor characteristics such as name, description, serial number, calibration information and user information such as location within a vehicle. By locating the TEDS information on the wireless sensor itself and enabling access to this information base from the application software, the application can identify the sensor unambiguously and interpret and present the sensor data stream without reference to any other information. The application software is able to read the status of each sensor module, responding in real-time to changes of

  6. TRICARE, Military Health System

    MedlinePlus

    ... Preventive Services Healthy Living Enter Profile Get My Plan Info Service Status Countries Zip Code Enter valid ... My Military Health Record Less Find a TRICARE Plan Answer some questions to find the right TRICARE ...

  7. Linear Aerospike SR-71 Experiment (LASRE): Aerospace Propulsion Hazard Mitigation Systems

    NASA Technical Reports Server (NTRS)

    Mizukami, Masashi; Corpening, Griffin P.; Ray, Ronald J.; Hass, Neal; Ennix, Kimberly A.; Lazaroff, Scott M.

    1998-01-01

    A major hazard posed by the propulsion system of hypersonic and space vehicles is the possibility of fire or explosion in the vehicle environment. The hazard is mitigated by minimizing or detecting, in the vehicle environment, the three ingredients essential to producing fire: fuel, oxidizer, and an ignition source. The Linear Aerospike SR-71 Experiment (LASRE) consisted of a linear aerospike rocket engine integrated into one-half of an X-33-like lifting body shape, carried on top of an SR-71 aircraft. Gaseous hydrogen and liquid oxygen were used as propellants. Although LASRE is a one-of-a-kind experimental system, it must be rated for piloted flight, so this test presented a unique challenge. To help meet safety requirements, the following propulsion hazard mitigation systems were incorporated into the experiment: pod inert purge, oxygen sensors, a hydrogen leak detection algorithm, hydrogen sensors, fire detection and pod temperature thermocouples, water misting, and control room displays. These systems are described, and their development discussed. Analyses, ground test, and flight test results are presented, as are findings and lessons learned.

  8. Optical memory system technology. Citations from the International Aerospace Abstracts data base

    NASA Technical Reports Server (NTRS)

    Zollars, G. F.

    1980-01-01

    Approximately 213 citations from the international literature which concern the development of the optical data storage system technology are presented. Topics covered include holographic computer storage devices, crystal, magneto, and electro-optics, imaging techniques, in addition to optical data processing and storage.

  9. AERIS: An Integrated Domain Information System for Aerospace Science and Technology

    ERIC Educational Resources Information Center

    Hatua, Sudip Ranjan; Madalli, Devika P.

    2011-01-01

    Purpose: The purpose of this paper is to discuss the methodology in building an integrated domain information system with illustrations that provide proof of concept. Design/methodology/approach: The present work studies the usual search engine approach to information and its pitfalls. A methodology was adopted for construction of a domain-based…

  10. Autonomic and Apoptotic, Aeronautical and Aerospace Systems, and Controlling Scientific Data Generated Therefrom

    NASA Technical Reports Server (NTRS)

    Sterritt, Roy (Inventor); Hinchey, Michael G. (Inventor)

    2015-01-01

    A self-managing system that uses autonomy and autonomicity is provided with the self-* property of autopoiesis (self-creation). In the event of an agent in the system self-destructing, autopoiesis auto-generates a replacement. A self-esteem reward scheme is also provided and can be used for autonomic agents, based on their performance and trust. Art agent with greater self-esteem may clone at a greater rate compared to the rate of an agent with lower self-esteem. A self-managing system is provided for a high volume of distributed autonomic/self-managing mobile agents, and autonomic adhesion is used to attract similar agents together or to repel dissimilar agents from an event horizon. An apoptotic system is also provided that accords an "expiry date" to data and digital objects, for example, that are available on the internet, which finds usefulness not only in general but also for controlling the loaning and use of space scientific data.

  11. System Engineering of Aerospace and Advanced Technology Programs at AN Astronautics Company

    NASA Astrophysics Data System (ADS)

    Kennedy, Mike O.

    The purpose of this Record of Study is to document an internship with the Martin Marietta Astronautics Group in Denver, Colorado that was performed in partial fulfillment of the requirements for the Doctor of Engineering degree at Texas A&M University, and to demonstrate that the internship objectives have been met. The internship included assignments with two Martin Marietta companies, on three different programs and in four areas of engineering. The Record of Study takes a first-hand look at system engineering, SDI and advanced program management, and the way Martin Marietta conducts business. The five internship objectives were related to assignments in system modeling, system integration, engineering analysis and technical management. In support of the first objective, the effects of thermally and mechanically induced mirror surface distortions upon the wavefront intensity field of a high energy laser beam passing through the optical train of a space-based laser system were modeled. To satisfy the second objective, the restrictive as opposed to the broad interpretation of the 1972 ABM Treaty, and the capability of the Strategic Defense Initiative Zenith Star Program to comply with the Treaty were evaluated. For the third objective, the capability of Martin Marietta to develop an automated analysis system to integrate and analyze Superconducting Super Collider detector designs was investigated. For the fourth objective, the thermal models that were developed in support of the Small Intercontinental Ballistic Missile flight tests were described. And in response to the fifth objective, the technical management role of the Product Integrity Engineer assigned to the Zenith Star spacecraft's Beam Control and Transfer Subsystem was discussed. This Record of Study explores the relationships between the engineering, business, security and social concerns associated with the practice of engineering and the management of programs by a major defense contractor.

  12. Noncertainty equivalent nonlinear adaptive control and its applications to mechanical and aerospace systems

    NASA Astrophysics Data System (ADS)

    Seo, Dong Eun

    Adaptive control has long focused on establishing stable adaptive control methods for various nonlinear systems. Existing methods are mostly based on the certainty equivalence principle which states that the controller structure developed in the deterministic case (without uncertain system parameters) can be used for controlling the uncertain system along by adopting a carefully determined parameter estimator. Thus, the overall performance of the regulating/tracking control depends on the performance of the parameter estimator, which often results in the poor closed-loop performance compared with the deterministic control because the parameter estimate can exhibit wide variations compared to their true values in general. In this dissertation, we introduce a new adaptive control method for nonlinear systems where unknown parameters are estimated to within an attracting manifold and the proposed control method always asymptotically recovers the closed-loop error dynamics of the deterministic case control system. Thus, the overall performance of this new adaptive control method is comparable to that of the deterministic control method, something that is usually impossible to obtain with the certainty equivalent control method. We apply the noncertainty equivalent adaptive control to study application arising in the n degree of freedom (DOF) robot control problem and spacecraft attitude control. Especially, in the context of the spacecraft attitude control problem, we developed a new attitude observer that also utilizes an attracting manifold, while ensuring that the estimated attitude matrix confirms at all instants to the special group of rotation matrices SO(3). As a result, we demonstrate for the first time a separation property of the nonlinear attitude control problem in terms of the observer/controller based closed-loop system. For both the robotic and spacecraft attitude control problems, detailed derivations for the controller design and accompanying stability

  13. Human-Centered Design of Human-Computer-Human Dialogs in Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Mitchell, Christine M.

    1998-01-01

    A series of ongoing research programs at Georgia Tech established a need for a simulation support tool for aircraft computer-based aids. This led to the design and development of the Georgia Tech Electronic Flight Instrument Research Tool (GT-EFIRT). GT-EFIRT is a part-task flight simulator specifically designed to study aircraft display design and single pilot interaction. ne simulator, using commercially available graphics and Unix workstations, replicates to a high level of fidelity the Electronic Flight Instrument Systems (EFIS), Flight Management Computer (FMC) and Auto Flight Director System (AFDS) of the Boeing 757/767 aircraft. The simulator can be configured to present information using conventional looking B757n67 displays or next generation Primary Flight Displays (PFD) such as found on the Beech Starship and MD-11.

  14. Morphology of Design of Aerospace Systems with Inclusion of Human Factors

    DTIC Science & Technology

    1977-08-01

    production ( intermittent versus con- tinuous), inventory control, forecasting , sched- uling, assembly sequencing, plant layout, quality control and testing. 8...state of the art, as the exi- gency for military hardware demanded , and as the forces of political pressure were satisfied. A review of the Air Force...emergence of new high technology systems which imposed increasing 50 and specialized demands on personnel led to suggested ways of improving

  15. Aerospace Systems Technical Research Operation Services (ASTROS) Industry Day (Briefing Charts)

    DTIC Science & Technology

    2014-07-01

    Mechanics • RQRO – Experimental Demonstrations – World-Class Facilities & Testing Support For Rocket Propulsion Technologies and Systems...10x, reducing s/c propellant 10x, enabling lighter and/or more capable s/c Transition? In-House: • Test facilities • 8 vacuum chambers • Thruster...and facility operations for demonstrating next generation rocket propulsion technologies • Early Industry Involvement – Encourage competition

  16. The 11th Aerospace Mechanisms Symposium

    NASA Technical Reports Server (NTRS)

    1977-01-01

    Mechanical devices and drives developed for aerospace applications are described. Satellite flywheels, magnetic bearings, a missile umbilical system, a cartridge firing device, and an oiler for satellite bearing lubrication are among the topics discussed.

  17. Bringing Back the Social Affordances of the Paper Memo to Aerospace Systems Engineering Work

    NASA Technical Reports Server (NTRS)

    Davidoff, Scott; Holloway, Alexandra

    2014-01-01

    Model-based systems engineering (MBSE) is a relatively new field that brings together the interdisciplinary study of technological components of a project (systems engineering) with a model-based ontology to express the hierarchical and behavioral relationships between the components (computational modeling). Despite the compelling promises of the benefits of MBSE, such as improved communication and productivity due to an underlying language and data model, we observed hesitation to its adoption at the NASA Jet Propulsion Laboratory. To investigate, we conducted a six-month ethnographic field investigation and needs validation with 19 systems engineers. This paper contributes our observations of a generational shift in one of JPL's core technologies. We report on a cultural misunderstanding between communities of practice that bolsters the existing technology drag. Given the high cost of failure, we springboard our observations into a design hypothesis - an intervention that blends the social affordances of the narrative-based work flow with the rich technological advantages of explicit data references and relationships of the model-based approach. We provide a design rationale, and the results of our evaluation.

  18. Ikhana: Unmanned Aircraft System Western States Fire Missions. Monographs in Aerospace History, Number 44

    NASA Technical Reports Server (NTRS)

    Merlin, Peter W.

    2009-01-01

    In 2006, NASA Dryden Flight Research Center, Edwards, Calif., obtained a civil version of the General Atomics MQ-9 unmanned aircraft system and modified it for research purposes. Proposed missions included support of Earth science research, development of advanced aeronautical technology, and improving the utility of unmanned aerial systems in general. The project team named the aircraft Ikhana a Native American Choctaw word meaning intelligent, conscious, or aware in order to best represent NASA research goals. Building on experience with these and other unmanned aircraft, NASA scientists developed plans to use the Ikhana for a series of missions to map wildfires in the western United States and supply the resulting data to firefighters in near-real time. A team at NASA Ames Research Center, Mountain View, Calif., developed a multispectral scanner that was key to the success of what became known as the Western States Fire Missions. Carried out by team members from NASA, the U.S. Department of Agriculture Forest Service, National Interagency Fire Center, National Oceanic and Atmospheric Administration, Federal Aviation Administration, and General Atomics Aeronautical Systems Inc., these flights represented an historic achievement in the field of unmanned aircraft technology.

  19. Print-and-play: a new paradigm for the nearly-instant aerospace system

    NASA Astrophysics Data System (ADS)

    Church, Kenneth H.; Newton, C. Michael; Marsh, Albert J.; MacDonald, Eric W.; Soto, Cassandra D.; Lyke, James C.

    2010-04-01

    Nanosatellites, in particular the sub-class of CubeSATs, will provide an ability to place multiple small satellites in space more efficiently than larger satellites, with the eventual expectation that they will compete against some of the roles played by traditional large satellites that are expensive to launch. In order to do this, it is necessary to decrease the weight and volume without decreasing the capabilities. At the same time, it is desirable to create systems extremely rapidly, less than a week from concept to orbit. The Air Force has been working on a concept termed "CubeFlow" which will be a web-based design flow for rapidly constructible CubeSAT systems. In CubeFlow, distributed suppliers create offerings (modules, software functions, for satellite bus and payloads) meeting standard size and interface specifications, which are registered as a living catalog to a design community within the web-based CubeFlow environment. The idea of allowing any interested parties to make circuits and sensors that simply and compatibly connect to a modular satellite carrier is going to change how satellites are developed and launched, promoting creative exploitation and reduced development time and costs. We extend the power of the CubeFlow framework by a concept we call "print-and-play." "Print-and-play" enriches the CubeFlow concept dramatically. Whereas the CubeFlow system is oriented to the brokering of pre-created offerings from a "plug-and-play" vendor community, the idea of "print-andplay" allows similar offerings to be created "from scratch," using web-based plug-ins to capture design requirements, which are communicated to rapid prototyping tools.

  20. Aerospace and military

    SciTech Connect

    Adam, J.A.; Esch, K

    1990-01-01

    This article reviews military and aerospace developments of 1989. The Voyager spacecraft returned astounding imagery from Neptune, sophisticated sensors were launched to explore Venus and Jupiter, and another craft went into earth orbit to explore cosmic rays, while a huge telescope is to be launched early in 1990. The U.S. space shuttle redesign was completed and access to space has become no longer purely a governmental enterprise. In the military realm, events within the Soviet bloc, such as the Berlin Wall's destruction, have popularized arms control. Several big treaties could be signed within the year. Massive troop, equipment, and budget reductions are being considered, along with a halt or delay of major new weapons systems. For new missions, the U.S. military is retreating to its role of a century ago - patrolling the nation's borders, this time against narcotics traffickers.

  1. Improved Tensile Adhesion Specimens for High Strength Epoxy Systems in Aerospace Applications

    NASA Technical Reports Server (NTRS)

    Haddock, M. Reed; McLennan, Michael L.

    2000-01-01

    An improved tensile adhesion button has been designed and tested that results in higher measured tensile adhesion strength while providing increased capability for testing high strength epoxy adhesive systems. The best attributes of two well-established tensile button designs were combined and refined into an optimized tensile button. The most significant design change to the tensile button was to improve alignment of the bonded tensile button specimens during tensile testing by changing the interface between the tensile button and the tensile test machine. The established or old button design uses a test fixture that pulls from a grooved annulus or anvil head while the new button design pulls from a threaded hole in the centerline of the button. Finite element (FE) analysis showed that asymmetric loading of the established anvil head tensile button significantly increases the stress concentration in the adhesive, causing failure at lower tensile test loads. The new tensile button was designed to eliminate asymmetric loading and eliminate misalignment sensitivity. Enhanced alignment resulted in improved tensile adhesion strength measurement up to 13.8 MPa (2000psi) over the established button design. Another design change increased the capability of the button by increasing the threaded hole diameter allowing it to test high strength epoxy systems up to 85 MPa(less than 12,000 psi). The improved tensile button can be used in button- to-button or button-to-panel configurations.

  2. [On-board medical support system (MSS) of flights of promising aerospace sets (design)].

    PubMed

    Ushakov, I B; Bednenko, V S

    2010-01-01

    It was suggested as the main compositive fractions MSS to consider the base system of automated evaluation of blood redistribution (BR) in body means of crew members protection and prophylaxis (CMPP) of unfavourable effects of flight factors to organism and also the automated circuit of CMPP' control. The advanced MSS includes 4 original measuring channels for registration of the base physiologic indices (electrocardiogram, venous-arterial pulsegram of neck vessels, reogram of head, earlap vessels pulsegram) the dynamic of which allows to determine with the help of computer the BR-integral parameter. The CMPP automated control circuit unites the separate protecting means in common system and executes the individual selection of regimes and CM PP-composition in accord with, first of all, body reactions manifestation and, secondly, individual physiologic status of spaceman. As CMPP was selected the negative pressure production around lower body part. Approlation of constructed active laboratory engineering mock-up MSS has performed investigations with participation of 29 subjects (Volunteers) under the modeling of hemodynamic shifts, developing in human body in short-term antiorthostatic hypokinesia (-10 degrees), as well as, in combined effect of antiorthostatic hypokinesia (-10 degrees), Coriolis acceleration and optokinetic stimulation. Results of investigations have showed, that the use of advanced MSS gives the indices of operator professional activity on the average of 17-32% under the decrease of hemodynamic stressful.

  3. Introduction: Aims and Requirements of Future Aerospace Vehicles. Chapter 1

    NASA Technical Reports Server (NTRS)

    Rodriguez, Pedro I.; Smeltzer, Stanley S., III; McConnaughey, Paul (Technical Monitor)

    2001-01-01

    The goals and system-level requirements for the next generation aerospace vehicles emphasize safety, reliability, low-cost, and robustness rather than performance. Technologies, including new materials, design and analysis approaches, manufacturing and testing methods, operations and maintenance, and multidisciplinary systems-level vehicle development are key to increasing the safety and reducing the cost of aerospace launch systems. This chapter identifies the goals and needs of the next generation or advanced aerospace vehicle systems.

  4. Human-centered design of human-computer-human dialogs in aerospace systems

    NASA Technical Reports Server (NTRS)

    Mitchell, Christine M.

    1994-01-01

    The second six months of this grant saw further development of GT-CATS, the Georgia Tech Crew Activity Tracking System, and progress on research exploring tutoring concepts for tutors for mode management. The latter included data analysis and a preliminary paper summarizing the development and evaluation of the VNAV Tutor. A follow-on to the VNAV Tutor is planned. Research in this direction will examine the use of OFMspert and GT-CATS to create an 'intelligent' tutor for mode management, a more extensive domain of application than only vertical navigation, and alternative pedagogy, such as substituting focused 'cases' of reported mode management situations rather than lessons defined by full LOFT scenarios.

  5. A modular approach to large-scale design optimization of aerospace systems

    NASA Astrophysics Data System (ADS)

    Hwang, John T.

    Gradient-based optimization and the adjoint method form a synergistic combination that enables the efficient solution of large-scale optimization problems. Though the gradient-based approach struggles with non-smooth or multi-modal problems, the capability to efficiently optimize up to tens of thousands of design variables provides a valuable design tool for exploring complex tradeoffs and finding unintuitive designs. However, the widespread adoption of gradient-based optimization is limited by the implementation challenges for computing derivatives efficiently and accurately, particularly in multidisciplinary and shape design problems. This thesis addresses these difficulties in two ways. First, to deal with the heterogeneity and integration challenges of multidisciplinary problems, this thesis presents a computational modeling framework that solves multidisciplinary systems and computes their derivatives in a semi-automated fashion. This framework is built upon a new mathematical formulation developed in this thesis that expresses any computational model as a system of algebraic equations and unifies all methods for computing derivatives using a single equation. The framework is applied to two engineering problems: the optimization of a nanosatellite with 7 disciplines and over 25,000 design variables; and simultaneous allocation and mission optimization for commercial aircraft involving 330 design variables, 12 of which are integer variables handled using the branch-and-bound method. In both cases, the framework makes large-scale optimization possible by reducing the implementation effort and code complexity. The second half of this thesis presents a differentiable parametrization of aircraft geometries and structures for high-fidelity shape optimization. Existing geometry parametrizations are not differentiable, or they are limited in the types of shape changes they allow. This is addressed by a novel parametrization that smoothly interpolates aircraft

  6. Thinking shift on health systems: from blueprint health programmes towards resilience of health systems

    PubMed Central

    Blanchet, Karl

    2015-01-01

    International health is still highly dominated by equilibrium approaches. The emergence of systems thinking in international health provides a great avenue to develop innovative health interventions adapted to changing contexts. The public health community, nevertheless, has the responsibility to translate concepts related to systems thinking and complexity into concrete research methods and interventions. One possibility is to consider the properties of systems such as resilience and adaptability as entry points to better understand how health systems react to shocks. PMID:25905481

  7. Potential Application of NASA Aerospace Technology to Ground-Based Power System

    NASA Technical Reports Server (NTRS)

    Povinelli, Louis A.; Welch, Gerard E.; Bakhle, Milind A.; Brown, Gerald V.

    2000-01-01

    A review of some of the basic gas turbine technology being developed at the NASA John H. Glenn Research Center at Lewis Field, which may have the potential to be applied to ground-based systems, is presented in this paper. Only a sampling of the large number of research activities underway at the Glenn Research Center can be represented here. The items selected for presentation are those that may lead to increased power and efficiency, reduced cycle design time and cost, improved thermal design, reduced fatigue and fracture, reduced mechanical friction and increased operating margin. The topic of improved material will be presented in this conference and shall not be discussed here. The topics selected for presentation are key research activities at the Glenn Center of Excellence on Turbo-machinery. These activities should be of interest and utility to this ISABE (International Symposium on Air Breathing Engines) Special Forum on Aero-Derivative Land-Based Gas Turbines and to the power industry.

  8. Challenges to Laser-Based Imaging Techniques in Gas Turbine Combustor Systems for Aerospace Applications

    NASA Technical Reports Server (NTRS)

    Locke, Randy J.; Anderson, Robert C.; Zaller, Michelle M.; Hicks, Yolanda R.

    1998-01-01

    Increasingly severe constraints on emissions, noise and fuel efficiency must be met by the next generation of commercial aircraft powerplants. At NASA Lewis Research Center (LeRC) a cooperative research effort with industry is underway to design and test combustors that will meet these requirements. To accomplish these tasks, it is necessary to gain both a detailed understanding of the combustion processes and a precise knowledge of combustor and combustor sub-component performance at close to actual conditions. To that end, researchers at LeRC are engaged in a comprehensive diagnostic investigation of high pressure reacting flowfields that duplicate conditions expected within the actual engine combustors. Unique, optically accessible flame-tubes and sector rig combustors, designed especially for these tests. afford the opportunity to probe these flowfields with the most advanced, laser-based optical diagnostic techniques. However, these same techniques, tested and proven on comparatively simple bench-top gaseous flame burners, encounter numerous restrictions and challenges when applied in these facilities. These include high pressures and temperatures, large flow rates, liquid fuels, remote testing, and carbon or other material deposits on combustor windows. Results are shown that document the success and versatility of these nonintrusive optical diagnostics despite the challenges to their implementation in realistic systems.

  9. Development and Application of a Portable Health Algorithms Test System

    NASA Technical Reports Server (NTRS)

    Melcher, Kevin J.; Fulton, Christopher E.; Maul, William A.; Sowers, T. Shane

    2007-01-01

    This paper describes the development and initial demonstration of a Portable Health Algorithms Test (PHALT) System that is being developed by researchers at the NASA Glenn Research Center (GRC). The PHALT System was conceived as a means of evolving the maturity and credibility of algorithms developed to assess the health of aerospace systems. Comprising an integrated hardware-software environment, the PHALT System allows systems health management algorithms to be developed in a graphical programming environment; to be tested and refined using system simulation or test data playback; and finally, to be evaluated in a real-time hardware-in-the-loop mode with a live test article. In this paper, PHALT System development is described through the presentation of a functional architecture, followed by the selection and integration of hardware and software. Also described is an initial real-time hardware-in-the-loop demonstration that used sensor data qualification algorithms to diagnose and isolate simulated sensor failures in a prototype Power Distribution Unit test-bed. Success of the initial demonstration is highlighted by the correct detection of all sensor failures and the absence of any real-time constraint violations.

  10. Development and Use of Engineering Standards for Computational Fluid Dynamics for Complex Aerospace Systems

    NASA Technical Reports Server (NTRS)

    Lee, Hyung B.; Ghia, Urmila; Bayyuk, Sami; Oberkampf, William L.; Roy, Christopher J.; Benek, John A.; Rumsey, Christopher L.; Powers, Joseph M.; Bush, Robert H.; Mani, Mortaza

    2016-01-01

    Computational fluid dynamics (CFD) and other advanced modeling and simulation (M&S) methods are increasingly relied on for predictive performance, reliability and safety of engineering systems. Analysts, designers, decision makers, and project managers, who must depend on simulation, need practical techniques and methods for assessing simulation credibility. The AIAA Guide for Verification and Validation of Computational Fluid Dynamics Simulations (AIAA G-077-1998 (2002)), originally published in 1998, was the first engineering standards document available to the engineering community for verification and validation (V&V) of simulations. Much progress has been made in these areas since 1998. The AIAA Committee on Standards for CFD is currently updating this Guide to incorporate in it the important developments that have taken place in V&V concepts, methods, and practices, particularly with regard to the broader context of predictive capability and uncertainty quantification (UQ) methods and approaches. This paper will provide an overview of the changes and extensions currently underway to update the AIAA Guide. Specifically, a framework for predictive capability will be described for incorporating a wide range of error and uncertainty sources identified during the modeling, verification, and validation processes, with the goal of estimating the total prediction uncertainty of the simulation. The Guide's goal is to provide a foundation for understanding and addressing major issues and concepts in predictive CFD. However, this Guide will not recommend specific approaches in these areas as the field is rapidly evolving. It is hoped that the guidelines provided in this paper, and explained in more detail in the Guide, will aid in the research, development, and use of CFD in engineering decision-making.

  11. [The health system of Cuba].

    PubMed

    Domínguez-Alonso, Emma; Zacea, Eduardo

    2011-01-01

    This paper describes the health conditions in Cuba and the general characteristics of the Cuban health system, including its structure and coverage, its financial sources, its health expenditure, its physical, material and human resources, and its stewardship functions. It also discusses the increasing importance of its research institutions and the role played by its users in the operation and evaluation of the system. Salient among the social actors involved in the health sector are the Cuban Women Federation and the Committees for the Defense of the Revolution. The paper concludes with the discussion of the most recent innovations implemented in the Cuban health system, including the cardiology networks, the Miracle Mission (Misión Milagro) and the Battle of Ideas (Batalla de Ideas).

  12. Systemic Intervention for Public Health

    PubMed Central

    Midgley, Gerald

    2006-01-01

    Many calls have been made for a systems approach to public health. My response is to offer a methodology for systemic intervention that (1) emphasizes the need to explore stakeholder values and boundaries for analysis, (2) challenges marginalization, and (3) draws upon a wide range of methods (from the systems literature and beyond) to create a flexible and responsive systems practice. I present and discuss several well-tested methods with a view to identifying their potential for supporting systemic intervention for public health. PMID:16449577

  13. [The health system of Venezuela].

    PubMed

    Bonvecchio, Anabelle; Becerril-Montekio, Victor; Carriedo-Lutzenkirchen, Angela; Landaeta-Jiménez, Maritza

    2011-01-01

    This paper describes the Venezuelan health system, including its structure and coverage, financial sources, human and material resources and its stewardship functions. This system comprises a public and a private sector. The public sector includes the Ministry of Popular Power for Health (MS) and several social security institutions, salient among them the Venezuelan Institute for Social Security (IVSS). The MH is financed with federal, state and county contributions. The IVSS is financed with employer, employee and government contributions. These two agencies provide services in their own facilities. The private sector includes providers offering services on an out-of-pocket basis and private insurance companies. The Venezuelan health system is undergoing a process of reform since the adoption of the 1999 Constitution which calls for the establishment of a national public health system. The reform process is now headed by the Barrio Adentro program.

  14. [The health system of Bolivia].

    PubMed

    Ledo, Carmen; Soria, René

    2011-01-01

    This paper describes the Bolivian health system, including its structure and organization, its financing sources, its health expenditure, its physical, material and humans resources, its stewardship activities and the its health research institutions. It also discusses the most recent policy innovations developed in Bolivia: the Maternal and Child Universal Insurance, the Program for the Extension of Coverage to Rural Areas, the Family, Community and Inter-Cultural Health Model and the cash-transfer program Juana Azurduy intended to strengthen maternal and child care.

  15. [Corruption and health care system].

    PubMed

    Marasović Šušnjara, Ivana

    2014-06-01

    Corruption is a global problem that takes special place in health care system. A large number of participants in the health care system and numerous interactions among them provide an opportunity for various forms of corruption, be it bribery, theft, bureaucratic corruption or incorrect information. Even though it is difficult to measure the amount of corruption in medicine, there are tools that allow forming of the frames for possible interventions.

  16. [The health system of Guatemala].

    PubMed

    Becerril-Montekio, Víctor; López-Dávila, Luis

    2011-01-01

    This paper describes the health conditions in Guatemala and, in more detail, the characteristics of the Guatemalan health system, including its structure en coverage, its financial sources, the stewardship functions developed by the Ministry of Health, as well as the generation of health information and the development of research activities. It also discusses the recent efforts to extend coverage of essential health services, mostly to poor rural areas.The most recent innovations also discussed in this paper include the Program for the Expansion of Coverage of Essential Services, the Program to Expand Access to Essential Drugs and the agreements between the Ministry of Health and several non-governmental organizations to provide essential services in rural settings.

  17. Silicon Carbide Technologies for Lightweighted Aerospace Mirrors

    DTIC Science & Technology

    2008-09-01

    Silicon Carbide Technologies for Lightweighted Aerospace Mirrors Lawrence E. Matson (1) Ming Y. Chen (1) Brett deBlonk (2) Iwona A...glass and beryllium to produce lightweighted aerospace mirror systems has reached its limits due to the long lead times, high processing costs...for making mirror structural substrates, figuring and finishing technologies being investigated to reduce cost time and cost, and non-destructive

  18. Applications of artificial intelligence 1993: Knowledge-based systems in aerospace and industry; Proceedings of the Meeting, Orlando, FL, Apr. 13-15, 1993

    NASA Technical Reports Server (NTRS)

    Fayyad, Usama M. (Editor); Uthurusamy, Ramasamy (Editor)

    1993-01-01

    The present volume on applications of artificial intelligence with regard to knowledge-based systems in aerospace and industry discusses machine learning and clustering, expert systems and optimization techniques, monitoring and diagnosis, and automated design and expert systems. Attention is given to the integration of AI reasoning systems and hardware description languages, care-based reasoning, knowledge, retrieval, and training systems, and scheduling and planning. Topics addressed include the preprocessing of remotely sensed data for efficient analysis and classification, autonomous agents as air combat simulation adversaries, intelligent data presentation for real-time spacecraft monitoring, and an integrated reasoner for diagnosis in satellite control. Also discussed are a knowledge-based system for the design of heat exchangers, reuse of design information for model-based diagnosis, automatic compilation of expert systems, and a case-based approach to handling aircraft malfunctions.

  19. KIBO Industry, innovates in aerospace

    NASA Astrophysics Data System (ADS)

    Paillard, Jean-Philippe

    2016-07-01

    The conquest of space is a true inspiration. Imagine a long-duration mission to a distant destination. What shall we take to produce our food? A cow, fish, chicken, or just eggs. In the current state of the animal production technologies are complicated and expensive to implement, except perhaps one: the breeding of edible insects. Based on this postulate KIBO in partnership with Space Agriculture Task Force and the university's department of Nutrition Nagoya most innovative research program is created in modern nutrition. This program is called Pegasus. Pegasus research program aims to develop food productions and modules applicable to the aerospace conquest. Kibo industry is the first entomocole production company creat in Europe to human food; it aims to become the world leader by 2020. Kibo industry is particularly specialized in producing entomosource (products with insects). The first phase of the program is to achieve an outcome cereal bar edible insect to aerospace. So we will present the issues and objectives of the project, for aerospace and us. Jean-Philippe Paillard is the KIBO industry CEO and Vice President of the FFPIDI insects farms federation. He is also the co computer alone authorization dossier on the market in Europe and therefore the privileged interlocutor of the General Directorate for Health and Customer Review on this topic. He intervened at the last conference on the insect organized by FAO in Wageningen and various universities in France.

  20. KIBO Industry, innovates in aerospace

    NASA Astrophysics Data System (ADS)

    Katayama, Naomi; Paillard, Jean-Philippe

    2016-07-01

    The conquest of space is a true inspiration. Imagine a long-duration mission to a distant destination. What shall we take to produce our food? A cow, fish, chicken, or just eggs. In the current state of the animal production technologies are complicated and expensive to implement, except perhaps one: the breeding of edible insects. Based on industry KIBO is postulated in partnership with Space Agriculture Task Force and the university's department of Nutrition Nagoya most innovative research program is created in modern nutrition. This program is called Pegasus. Pegasus research program aims to develop food productions and modules applicable to the aerospace conquest. Kibo entomocole industry is the first production company in Europe to human food, it aims to become the world leader by 2020. Kibo industry is particularly specialized in producing entomosource (products with insects). The first phase of the program is to achieve an outcome cereal bar edible insect to aerospace. So we will present the issues and objectives of the project, for aerospace and us. Jean-Philippe Paillard is the KIBO industry CEO and Vice President of the FFPIDI insects farms federation. He is also the co computer alone authorization dossier on the market in Europe and therefore the privileged interlocutor of the General Directorate for Health and Customer Review on this topic. He intervened at the last conference on the insect organized by FAO in Wageningen and in the universities of Angers, Nantes, Lille.

  1. Intelligent Integrated System Health Management

    NASA Technical Reports Server (NTRS)

    Figueroa, Fernando

    2012-01-01

    Intelligent Integrated System Health Management (ISHM) is the management of data, information, and knowledge (DIaK) with the purposeful objective of determining the health of a system (Management: storage, distribution, sharing, maintenance, processing, reasoning, and presentation). Presentation discusses: (1) ISHM Capability Development. (1a) ISHM Knowledge Model. (1b) Standards for ISHM Implementation. (1c) ISHM Domain Models (ISHM-DM's). (1d) Intelligent Sensors and Components. (2) ISHM in Systems Design, Engineering, and Integration. (3) Intelligent Control for ISHM-Enabled Systems

  2. Integrated Systems Health Management for Intelligent Systems

    NASA Technical Reports Server (NTRS)

    Figueroa, Fernando; Melcher, Kevin

    2011-01-01

    The implementation of an integrated system health management (ISHM) capability is fundamentally linked to the management of data, information, and knowledge (DIaK) with the purposeful objective of determining the health of a system. It is akin to having a team of experts who are all individually and collectively observing and analyzing a complex system, and communicating effectively with each other in order to arrive at an accurate and reliable assessment of its health. In this paper, concepts, procedures, and approaches are presented as a foundation for implementing an intelligent systems ]relevant ISHM capability. The capability stresses integration of DIaK from all elements of a system. Both ground-based (remote) and on-board ISHM capabilities are compared and contrasted. The information presented is the result of many years of research, development, and maturation of technologies, and of prototype implementations in operational systems.

  3. In-Situ Load System for Calibrating and Validating Aerodynamic Properties of Scaled Aircraft in Ground-Based Aerospace Testing Applications

    NASA Technical Reports Server (NTRS)

    Commo, Sean A. (Inventor); Lynn, Keith C. (Inventor); Landman, Drew (Inventor); Acheson, Michael J. (Inventor)

    2016-01-01

    An In-Situ Load System for calibrating and validating aerodynamic properties of scaled aircraft in ground-based aerospace testing applications includes an assembly having upper and lower components that are pivotably interconnected. A test weight can be connected to the lower component to apply a known force to a force balance. The orientation of the force balance can be varied, and the measured forces from the force balance can be compared to applied loads at various orientations to thereby develop calibration factors.

  4. Comparison of the Aerospace Systems Test Reactor loss-of-coolant test data with predictions of the 3D-AIRLOCA code

    SciTech Connect

    Warinner, D.K.

    1983-01-01

    This paper compares the predictions of the revised 3D-AIRLOCA computer code to those data available from the Aerospace Systems Test Reactor's (ASTR's) loss-of-coolant-accident (LOCA) tests run in 1964. The theoretical and experimental hot-spot temperature responses compare remarkably well. In the thirteen cases studied, the irradiation powers varied from 0.4 to 8.87 MW; the irradiation times were 300, 1540, 1800, and 10/sup 4/ s. The degrees of agreement between the data and predictions provide an experimental validation of the 3D-AIRLOCA code.

  5. [The health system of Honduras].

    PubMed

    Bermúdez-Madriz, Juan Luis; Sáenz, María del Rocío; Muiser, Jorine; Acosta, Mónica

    2011-01-01

    This paper describes the health system of Honduras, including its challenges, structure coverage, sources of financing, resources and stewardship activities. This system counts with a public and a private sector. The public sector includes the Ministry of Health (MH) and the Honduran Social Security Institute (HSSI). The private sector is dominated by a set of providers offering services payed mostly out-of-pocket. The National Health Plan 2010-2014 includes a set of reforms oriented towards the creation of an integrated and plural system headed by the MH in its stewardship role. It also anticipates the creation of a public health insurance for the poor population and the transformation of the HSSI into a public insurance agency which contracts services for its affiliates with public and private providers under a family medicine model.

  6. Aerospace Safety Advisory Panel

    NASA Technical Reports Server (NTRS)

    1989-01-01

    This report provides findings, conclusions and recommendations regarding the National Space Transportation System (NSTS), the Space Station Freedom Program (SSFP), aeronautical projects and other areas of NASA activities. The main focus of the Aerospace Safety Advisory Panel (ASAP) during 1988 has been monitoring and advising NASA and its contractors on the Space Transportation System (STS) recovery program. NASA efforts have restored the flight program with a much better management organization, safety and quality assurance organizations, and management communication system. The NASA National Space Transportation System (NSTS) organization in conjunction with its prime contractors should be encouraged to continue development and incorporation of appropriate design and operational improvements which will further reduce risk. The data from each Shuttle flight should be used to determine if affordable design and/or operational improvements could further increase safety. The review of Critical Items (CILs), Failure Mode Effects and Analyses (FMEAs) and Hazard Analyses (HAs) after the Challenger accident has given the program a massive data base with which to establish a formal program with prioritized changes.

  7. Aerospace Safety Advisory Panel

    NASA Astrophysics Data System (ADS)

    1989-03-01

    This report provides findings, conclusions and recommendations regarding the National Space Transportation System (NSTS), the Space Station Freedom Program (SSFP), aeronautical projects and other areas of NASA activities. The main focus of the Aerospace Safety Advisory Panel (ASAP) during 1988 has been monitoring and advising NASA and its contractors on the Space Transportation System (STS) recovery program. NASA efforts have restored the flight program with a much better management organization, safety and quality assurance organizations, and management communication system. The NASA National Space Transportation System (NSTS) organization in conjunction with its prime contractors should be encouraged to continue development and incorporation of appropriate design and operational improvements which will further reduce risk. The data from each Shuttle flight should be used to determine if affordable design and/or operational improvements could further increase safety. The review of Critical Items (CILs), Failure Mode Effects and Analyses (FMEAs) and Hazard Analyses (HAs) after the Challenger accident has given the program a massive data base with which to establish a formal program with prioritized changes.

  8. Applied breath analysis: an overview of the challenges and opportunities in developing and testing sensor technology for human health monitoring in aerospace and clinical applications.

    PubMed

    Hunter, Gary W; Dweik, Raed A

    2008-09-01

    The aerospace industry requires the development of a range of chemical sensor technologies for such applications as leak detection, emission monitoring, fuel leak detection, environmental monitoring, and fire detection. A family of chemical sensors are being developed based on micromachining and microfabrication technology to fabricate microsensors with minimal size, weight, and power consumption, and the use of nanomaterials and structures to develop sensors with improved stability combined with higher sensitivity. However, individual sensors are limited in the amount of information that they can provide in environments that contain multiple chemical species. Thus, sensor arrays are being developed to address detection needs in such multi-species environments. These technologies and technical approaches have direct relevance to breath monitoring for clinical applications. This paper gives an overview of developing cutting-edge sensor technology and possible barriers to new technology implementation. This includes lessons learned from previous microsensor development, recent work in development of a breath monitoring system, and future directions in the implementation of cutting edge sensor technology. Clinical applications and the potential impact to the biomedical field of miniaturized smart gas sensor technology are discussed.

  9. The Relationship of Skilled Aerospace Manufacturing Workforce Performance to Training

    ERIC Educational Resources Information Center

    Malsberry, Suzanne

    2014-01-01

    A major economic driver, the aerospace industry contributes to exports and higher wage jobs, which the United States requires to maintain robust economic health. Despite the investment in vocational educational training programs, insufficient workers have been available to aerospace companies. The purpose of this study was to investigate the…

  10. Unification: An international aerospace information opportunity

    NASA Technical Reports Server (NTRS)

    Cotter, Gladys A.; Lahr, Thomas F.; Carroll, Bonnie C.

    1992-01-01

    Science and technology projects are becoming more and more international and interdisciplinary. Other parts of the world, notably Europe, are increasingly powerful players in the aerospace industry. This change has led to the development of various aerospace information initiatives in other countries. With scarce resources in all areas of government and industry, the NASA STI Program is reviewing its current acquisition and exchange practices and policies to factor in the changing requirements and new opportunities within the international community. Current NASA goals and activities are reviewed with a new view toward developing a scenario for establishing an international aerospace database, maintaining compatibility among national aerospace information systems, eliminating duplication of effort, and sharing resources through international cooperation wherever possible.

  11. Unification - An international aerospace information opportunity

    NASA Technical Reports Server (NTRS)

    Cotter, Gladys A.; Lahr, Thomas F.

    1992-01-01

    Science and technology projects are becoming more and more international and interdisciplinary. Other parts of the world, notably Europe, are increasingly powerful players in the aerospace industry. This change has led to the development of various aerospace information initiatives in other countries. With scarce resources in all areas of government and industry, the NASA STI Program is reviewing its current acquisition and exchange practices and policies to factor in the changing requirements and new opportunities within the international community. Current NASA goals and activities are reviewed with a new view toward developing a scenario for establishing an international aerospace database, maintaining compatibility among national aerospace information systems, eliminating duplication of effort, and sharing resources through international cooperation wherever possible.

  12. Unification: An international aerospace information issue

    NASA Technical Reports Server (NTRS)

    Cotter, Gladys A.; Lahr, Thomas F.

    1991-01-01

    Science and technology projects are becoming more and more international and interdisciplinary. Other parts of the world, notably Europe, are increasingly powerful players in the aerospace business. This change has led to the development of various aerospace information initiatives in other countries. With scarce resources in all areas of government and industry, the NASA STI Program is reviewing its current acquisition and exchange practices and policies to factor in the changing requirements and new opportunities within the international community. Current NASA goals and activities are reviewed with a view toward developing a scenario for establishing an international aerospace data base, maintaining compatibility among national aerospace information systems, eliminating duplication of effort, and sharing resources through international cooperation wherever possible.

  13. Cryocooler Prognostic Health Management System

    NASA Astrophysics Data System (ADS)

    Shah, A.; Penswick, L.; Dodson, C.; Roberts, T.

    2008-03-01

    High performance sensors are playing an increasingly important role in all aspects of all critical DoD missions. There is a family of sensors that operate with improved sensitivities if cooled to very low (cryogenic) temperatures. For these sensors, a healthy and reliable mechanical refrigeration system (cryocooler) is required. The ability to accurately predict the "health" or remaining useful life of the cryocooler has significant benefits from the viewpoint of ensuring that mission critical functions can be carried out with a high probability of success. The paper provides an overview and approaches used for the development of a Cryocooler Prognostic Health Management System (CPHMS) capable of assessing the cryocooler "health" from the viewpoint of the level of performance degradation and/or the potential for near term failure. Additionally, it quantifies the reliable remaining useful life of the cryocooler. While the proposed system is focused on the specific application to linear drive cryocoolers, especially for DoD, many of the attributes of the system can be applied to other specialized system hardware in both commercial and U.S. Government agency for situations where it is critical that all aspects of the hardware "health" and "remaining useful life" be fully understood. Several benefits of the health monitoring system are also described in the paper.

  14. Introduction on health recommender systems.

    PubMed

    Sanchez-Bocanegra, C L; Sanchez-Laguna, F; Sevillano, J L

    2015-01-01

    People are looking for appropriate health information which they are concerned about. The Internet is a great resource of this kind of information, but we have to be careful if we don't want to get harmful info. Health recommender systems are becoming a new wave for apt health information as systems suggest the best data according to the patients' needs.The main goals of health recommender systems are to retrieve trusted health information from the Internet, to analyse which is suitable for the user profile and select the best that can be recommended, to adapt their selection methods according to the knowledge domain and to learn from the best recommendations.A brief definition of recommender systems will be given and an explanation of how are they incorporated in the health sector. A description of the main elementary recommender methods as well as their most important problems will also be made. And, to finish, the state of the art will be described.

  15. Ninteenth Aerospace Mechanisms Symposium

    NASA Technical Reports Server (NTRS)

    1985-01-01

    The proceedings of the 19th Aerospace Mechanisms Symposium are reported. Technological areas covered include space lubrication, bearings, aerodynamic devices, spacecraft/Shuttle latches, deployment, positioning, and pointing. Devices for spacecraft docking and manipulator and teleoperator mechanisms are also described.

  16. Aerospace bibliography, seventh edition

    NASA Technical Reports Server (NTRS)

    Blashfield, J. F. (Compiler)

    1983-01-01

    Space travel, planetary probes, applications satellites, manned spaceflight, the impacts of space exploration, future space activities, astronomy, exobiology, aeronautics, energy, space and the humanities, and aerospace education are covered.

  17. Portable plant health measurement system

    NASA Astrophysics Data System (ADS)

    Aksoy, Nejat

    1999-01-01

    This system is designed to assist diagnosis of the plant health globally. The system is formed by portable plant health measurement devices connected to a diagnosis and analysis center through a flexible information network. A flexible network is formed so that users from the remote areas as well as internet are able to use the system. The hardware and software is designed in an open technology for easier upgrades. Portable plant health measurement instrument is a networkable leaf flash spectrophotometer capable of measuring Qa, Electrochromy, P700, Fluorescence, S Fluorescence, reflectance spectra, temperature, humidity and image of the leaf with GPS information. The network and intelligent user interface options of the system can be used by any commercially or user designed instrument.

  18. Crack Propagation Analysis Using Acoustic Emission Sensors for Structural Health Monitoring Systems

    DOE PAGES

    Kral, Zachary; Horn, Walter; Steck, James

    2013-01-01

    Aerospace systems are expected to remain in service well beyond their designed life. Consequently, maintenance is an important issue. A novel method of implementing artificial neural networks and acoustic emission sensors to form a structural health monitoring (SHM) system for aerospace inspection routines was the focus of this research. Simple structural elements, consisting of flat aluminum plates of AL 2024-T3, were subjected to increasing static tensile loading. As the loading increased, designed cracks extended in length, releasing strain waves in the process. Strain wave signals, measured by acoustic emission sensors, were further analyzed in post-processing by artificial neural networks (ANN).more » Several experiments were performed to determine the severity and location of the crack extensions in the structure. ANNs were trained on a portion of the data acquired by the sensors and the ANNs were then validated with the remaining data. The combination of a system of acoustic emission sensors, and an ANN could determine crack extension accurately. The difference between predicted and actual crack extensions was determined to be between 0.004 in. and 0.015 in. with 95% confidence. These ANNs, coupled with acoustic emission sensors, showed promise for the creation of an SHM system for aerospace systems.« less

  19. Crack propagation analysis using acoustic emission sensors for structural health monitoring systems.

    PubMed

    Kral, Zachary; Horn, Walter; Steck, James

    2013-01-01

    Aerospace systems are expected to remain in service well beyond their designed life. Consequently, maintenance is an important issue. A novel method of implementing artificial neural networks and acoustic emission sensors to form a structural health monitoring (SHM) system for aerospace inspection routines was the focus of this research. Simple structural elements, consisting of flat aluminum plates of AL 2024-T3, were subjected to increasing static tensile loading. As the loading increased, designed cracks extended in length, releasing strain waves in the process. Strain wave signals, measured by acoustic emission sensors, were further analyzed in post-processing by artificial neural networks (ANN). Several experiments were performed to determine the severity and location of the crack extensions in the structure. ANNs were trained on a portion of the data acquired by the sensors and the ANNs were then validated with the remaining data. The combination of a system of acoustic emission sensors, and an ANN could determine crack extension accurately. The difference between predicted and actual crack extensions was determined to be between 0.004 in. and 0.015 in. with 95% confidence. These ANNs, coupled with acoustic emission sensors, showed promise for the creation of an SHM system for aerospace systems.

  20. Third Aerospace Environmental Technology Conference

    NASA Technical Reports Server (NTRS)

    Whitaker, A. F. (Editor); Cross, D. R. (Editor); Caruso, S. V. (Editor); Clark-Ingram, M. (Editor)

    1999-01-01

    The elimination of CFC's, Halons, TCA, other ozone depleting chemicals, and specific hazardous materials is well underway. The phaseout of these chemicals has mandated changes and new developments in aerospace materials and processes. We are beyond discovery and initiation of these new developments and are now in the implementation phase. This conference provided a forum for materials and processes engineers, scientists, and managers to describe, review, and critically assess the evolving replacement and clean propulsion technologies from the standpoint of their significance, application, impact on aerospace systems, and utilization by the research and development community. The use of these new technologies, their selection and qualification, their implementation, and the needs and plans for further developments are presented.

  1. 34th Aerospace Mechanisms Symposium

    NASA Technical Reports Server (NTRS)

    Boesiger, Edward A. (Compiler)

    2000-01-01

    The Aerospace Mechanisms Symposium (AMS) provides a unique forum for those active in the design, production and use of aerospace mechanisms. A major focus is the reporting of problems and solutions associated with the development and flight certification of new mechanisms. The National Aeronautics and Space Administration and Lockheed Martin Space Systems Company (LMSSC) share the responsibility for organizing the AMS. Now in its 34th year, the AMS continues to be well attended, attracting participants from both the U.S. and abroad. The 34th AMS, hosted by the Goddard Space Flight Center (GSFC) in Greenbelt, Maryland, was held May 10, 11 and 12, 2000. During these three days, 34 papers were presented. Topics included deployment mechanisms, bearings, actuators, pointing and optical mechanisms, Space Station mechanisms, release mechanisms, and test equipment. Hardware displays during the vendor fair gave attendees an opportunity to meet with developers of current and future mechanism components.

  2. 38th Aerospace Mechanisms Symposium

    NASA Technical Reports Server (NTRS)

    Boesiger, Edward A. (Compiler)

    2006-01-01

    The Aerospace Mechanisms Symposium (AMS) provides a unique forum for those active in the design, production and use of aerospace mechanisms. A major focus is the reporting of problems and solutions associated with the development and flight certification of new mechanisms. Organized by the Mechanisms Education Association, the National Aeronautics and Space Administration and Lockheed Martin Space Systems Company (LMSSC) share the responsibility for hosting the AMS. Now in its 38th symposium, the AMS continues to be well attended, attracting participants from both the U.S. and abroad. The 38th AMs, hosted by the NASA Langley Research Center in Williamsburg, Virginia, was held May 17-19, 2006. During these three days, 34 papers were presented. Topics included gimbals, tribology, actuators, aircraft mechanisms, deployment mechanisms, release mechanisms, and test equipment. Hardware displays during the supplier exhibit gave attendees an opportunity to meet with developers of current and future mechanism components.

  3. 39th Aerospace Mechanisms Symposium

    NASA Technical Reports Server (NTRS)

    Boesiger, E. A. (Compiler)

    2008-01-01

    The Aerospace Mechanisms Symposium (AMS) provides a unique forum for those active in the design, production, and use of aerospace mechanisms. A major focus is the reporting of problems and solutions associated with the development and flight certification of new mechanisms. Organized by the Mechanisms Education Association, NASA Marshall Space Flight Center (MSFC) and Lockheed Martin Space Systems Company (LMSSC) share the responsibility for hosting the AMS. Now in its 39th symposium, the AMS continues to be well attended, attracting participants from both the United States and abroad. The 39th AMS was held in Huntsville, Alabama, May 7-9, 2008. During these 3 days, 34 papers were presented. Topics included gimbals and positioning mechanisms, tribology, actuators, deployment mechanisms, release mechanisms, and sensors. Hardware displays during the supplier exhibit gave attendees an opportunity to meet with developers of current and future mechanism components.

  4. 37th Aerospace Mechanisms Symposium

    NASA Technical Reports Server (NTRS)

    Boesiger, Edward A. (Compiler)

    2004-01-01

    The Aerospace Mechanisms Symposium (AMS) provides a unique forum for those active in the design, production and use of aerospace mechanisms. A major focus is reporting problems and solutions associated with the development and flight certification of new mechanisms. Organized by the Mechanisms Education Association, NASA and Lockheed Martin Space Systems Company (LMSSC) share the responsibility for hosting the AMS. Now in its 37th symposium, the AMS continues to be well attended, attracting participants from both the U.S. and abroad. The 37th AMS, hosted by the Johnson Space Center (JSC) in Galveston, Texas, was held May 19, 20 and 21, 2004. During these three days, 34 papers were presented. Topics included deployment mechanisms, tribology, actuators, pointing and optical mechanisms, Space Station and Mars Rover mechanisms, release mechanisms, and test equipment. Hardware displays during the supplier exhibit gave attendees an opportunity to meet with developers of current and future mechanism components.

  5. [The health system of Chile].

    PubMed

    Becerril-Montekio, Víctor; Reyes, Juan de Dios; Manuel, Annick

    2011-01-01

    This paper describes the Chilean health system, including its structure, financing, beneficiaries, and its physical, material and human resources. This system has two sectors, public and private. The public sector comprises all the organisms that constitute the National System of Health Services, which covers 70% of the population, including the rural and urban poor, the low middle-class, the retired, and the self-employed professionals and technicians.The private sector covers 17.5% of the population, mostly the upper middle-class and the high-income population. A small proportion of the population uses private health services and pays for them out-of-pocket. Around l0% of the population is covered by other public agencies, basically the Health Services for the Armed Forces. The system was recently reformed with the establishment of a Universal System of Explicit Entitlements, which operates through a Universal Plan of Explicit Entitlements (AUGE), which guarantees timely access to treatment for 56 health problems, including cancer in children, breast cancer, ischaemic heart disease, HIV/AIDS and diabetes.

  6. Health Systems Governance for health equity: critical reflections.

    PubMed

    Labonté, Ronald

    2010-01-01

    This article addresses several issues pertinent to health systems governance for health equity. It argues the importance of health systems using measures of positive health (well-being), discriminating in favour of historically less advantaged groups and weighing the costs of health care against investments in the social determinants of health. It cautions that the concept of governance could weaken the role of government, with disequalizing effects, while emphasizing the importance of two elements of good governance (transparency and participation) in health systems decision-making. It distinguishes between participation as volunteer labour and participation as exercising political rights, and questions the assumption that decentralization in health systems is necessarily empowering. It then identifies five health system roles to address issues of equity (educator/watchdog, resource broker, community developer, partnership developer and advocate/catalyst) and the implications of these roles for practice. Drawing on preliminary findings of a global research project on comprehensive primary health care, it discusses political aspects of progressive health system reform and the implications of equity-focused health system governance on health workers' roles, noting the importance of health workers claiming their identity as citizens. The article concludes with a commentary on the inherently political nature of health reforms based on equity; the necessary confrontation with power relations politics involves; and the health systems governance challenge of managing competing health discourses of efficiency and results-based financing, on the one hand, and equity and citizen empowerment, on the other.

  7. [Health: an adaptive complex system].

    PubMed

    Toro-Palacio, Luis Fernando; Ochoa-Jaramillo, Francisco Luis

    2012-02-01

    This article points out the enormous gap that exists between complex thinking of an intellectual nature currently present in our environment, and complex experimental thinking that has facilitated the scientific and technological advances that have radically changed the world. The article suggests that life, human beings, global society, and all that constitutes health be considered as adaptive complex systems. This idea, in turn, prioritizes the adoption of a different approach that seeks to expand understanding. When this rationale is recognized, the principal characteristics and emerging properties of health as an adaptive complex system are sustained, following a care and services delivery model. Finally, some pertinent questions from this perspective are put forward in terms of research, and a series of appraisals are expressed that will hopefully serve to help us understand all that we have become as individuals and as a species. The article proposes that the delivery of health care services be regarded as an adaptive complex system.

  8. Development and Deployment of an Aerospace Recommended Practice (ARP) Compliant Measurement System for nvPM Certification Measurements of Aircraft Engines - Current Status.

    NASA Astrophysics Data System (ADS)

    Whitefield, P. D.; Hagen, D. E.; Lobo, P.; Miake-Lye, R. C.

    2015-12-01

    The Society of Automotive Engineers (SAE) Aircraft Exhaust Emissions Measurement Committee (E-31) has published an Aerospace Information Report (AIR) 6241 detailing the sampling system for the measurement of non-volatile particulate matter (nvPM) from aircraft engines (SAE 2013). The system is designed to operate in parallel with existing International Civil Aviation Organization (ICAO) Annex 16 compliant combustion gas sampling systems used for emissions certification from aircraft engines captured by conventional (Annex 16) gas sampling rakes (ICAO, 2008). The SAE E-31 committee is also working to ballot an Aerospace Recommended Practice (ARP) that will provide the methodology and system specification to measure nvPM from aircraft engines. The ARP is currently in preparation and is expected to be ready for ballot in 2015. A prototype AIR-compliant nvPM measurement system - The North American Reference System (NARS) has been built and evaluated at the MSTCOE under the joint sponsorship of the FAA, EPA and Transport Canada. It has been used to validate the performance characteristics of OEM AIR-compliant systems and is being used in engine certification type testing at OEM facilities to obtain data from a set of representative engines in the fleet. The data collected during these tests will be used by ICAO/CAEP/WG3/PMTG to develop a metric on which on the regulation for nvPM emissions will be based. This paper will review the salient features of the NARS including: (1) emissions sample transport from probe tip to the key diagnostic tools, (2) the mass and number-based diagnostic tools for nvPM mass and number concentration measurement and (3) methods employed to assess the extent of nvPM loss throughout the sampling system. This paper will conclude with a discussion of the recent results from inter-comparison studies conducted with other US - based systems that gives credence to the ARP's readiness for ballot.

  9. Second Conference on NDE for Aerospace Requirements

    NASA Technical Reports Server (NTRS)

    Woodis, Kenneth W. (Compiler); Bryson, Craig C. (Compiler); Workman, Gary L. (Compiler)

    1990-01-01

    Nondestructive evaluation and inspection procedures must constantly improve rapidly in order to keep pace with corresponding advances being made in aerospace material and systems. In response to this need, the 1989 Conference was organized to provide a forum for discussion between the materials scientists, systems designers, and NDE engineers who produce current and future aerospace systems. It is anticipated that problems in current systems can be resolved more quickly and that new materials and structures can be designed and manufactured in such a way as to be more easily inspected and to perform reliably over the life cycle of the system.

  10. Health risks of energy systems.

    PubMed

    Krewitt, W; Hurley, F; Trukenmüller, A; Friedrich, R

    1998-08-01

    Health risks from fossil, renewable and nuclear reference energy systems are estimated following a detailed impact pathway approach. Using a set of appropriate air quality models and exposure-effect functions derived from the recent epidemiological literature, a methodological framework for risk assessment has been established and consistently applied across the different energy systems, including the analysis of consequences from a major nuclear accident. A wide range of health impacts resulting from increased air pollution and ionizing radiation is quantified, and the transferability of results derived from specific power plants to a more general context is discussed.

  11. Should health systems agencies be involved in environmental health planning?

    PubMed Central

    Higgins, C W; Philips, B U; Bruhn, J G; Aker, L T

    1980-01-01

    Public Law 93-641 provides health systems agencies (HSAs) with a broad planning preview which has enabled a number of agencies to address environmental health issues in their health systems plans. Opponents of HSA involvement in environmental health planning charge that these activities overextend agency resources, duplicate efforts of other government agencies and involve HSAs in "issues of public policy." Closer examination of these charges finds them lacking in validity. The planning activities of health systems agencies are cooperative in nature, drawing upon the planning efforts of other institutions and agencies. It is illogical to exclude environmental concerns from general health planning in light of the impact of the environment upon health. Charges that issues of public policy are inappropriate topics for health planning are seen as attempts to avoid scrutiny of inconsistant legislative policies. Cooperative planning between health systems agencies and environmental health agencies is considered both desirable and essential for the development of effective health planning. PMID:7428743

  12. Environmentally regulated aerospace coatings

    NASA Technical Reports Server (NTRS)

    Morris, Virginia L.

    1995-01-01

    Aerospace coatings represent a complex technology which must meet stringent performance requirements in the protection of aerospace vehicles. Topcoats and primers are used, primarily, to protect the structural elements of the air vehicle from exposure to and subsequent degradation by environmental elements. There are also many coatings which perform special functions, i.e., chafing resistance, rain erosion resistance, radiation and electric effects, fuel tank coatings, maskants, wire and fastener coatings. The scheduled promulgation of federal environmental regulations for aerospace manufacture and rework materials and processes will regulate the emissions of photochemically reactive precursors to smog and air toxics. Aerospace organizations will be required to identify, qualify and implement less polluting materials. The elimination of ozone depleting chemicals (ODC's) and implementation of pollution prevention requirements are added constraints which must be addressed concurrently. The broad categories of operations affected are the manufacture, operation, maintenance, and repair of military, commercial, general aviation, and space vehicles. The federal aerospace regulations were developed around the precept that technology had to be available to support the reduction of organic and air toxic emissions, i.e., the regulations cannot be technology forcing. In many cases, the regulations which are currently in effect in the South Coast Air Quality Management District (SCAQMD), located in Southern California, were used as the baseline for the federal regulations. This paper addresses strategies used by Southern California aerospace organizations to cope with these regulatory impacts on aerospace productions programs. All of these regulatory changes are scheduled for implementation in 1993 and 1994, with varying compliance dates established.

  13. [The health system of Brazil].

    PubMed

    Montekio, Víctor Becerril; Medina, Guadalupe; Aquino, Rosana

    2011-01-01

    This paper describes the Brazilian health system, which includes a public sector covering almost 75% of the population and an expanding private sector offering health services to the rest of the population. The public sector is organized around the Sistema Único de Saúde (SUS) and it is financed with general taxes and social contributions collected by the three levels of government (federal, state and municipal). SUS provides health care through a decentralized network of clinics, hospitals and other establishments, as well as through contracts with private providers. SUS is also responsible for the coordination of the public sector. The private sector includes a system of insurance schemes known as Supplementary Health which is financed by employers and/or households: group medicine (companies and households), medical cooperatives, the so called Self-Administered Plans (companies) and individual insurance plans.The private sector also includes clinics, hospitals and laboratories offering services on out-of-pocket basis mostly used by the high-income population. This paper also describes the resources of the system, the stewardship activities developed by the Ministry of Health and other actors, and the most recent policy innovations implemented in Brazil, including the programs saúde da Familia and Mais Saúde.

  14. Power System State of Health

    NASA Astrophysics Data System (ADS)

    Carpenter, P.

    2012-12-01

    Understanding the state of a polar station's power system can be critical to a successful long-term deployment. Knowing how the system is functioning, prior to service, is key to proper logistics, scheduling and the service performed during a visit. A full record of power system performance is key to proper analysis of the health of the power system. The design of a power system with monitoring is a balance of components to gather information while still trying to keep complexity low. To properly incorporate a system to analyze a stations power system a firm understanding of how the power components function in polar environments as well as communication to data acquisition and / or telemetry is needed. For example designers will need to know how a station's power storage system will change in colder environments then manufactures standard design criteria. This would include the reduced available capacity, change in the mean time between failure and possible new failure modes. This understanding coupled with a system that would collect key information on the state of health of the power system will provide crucial insight in to what service is needed to keep the station functioning.

  15. International Conference on Aerospace Trends...2001 - From Aeroplane to Aerospace Plane, Thiruvananthapuram, India, June 27, 28, 1991, Proceedings

    NASA Astrophysics Data System (ADS)

    1991-08-01

    Consideration is given to operational characteristics of future launch vehicles, trends in propulsion technology, technology challenges in the development of cryogenic propulsion systems for future reusable space-launch vehicles, estimation of the overall drag coefficient of an aerospace plane, and self-reliance in aerospace structures. Attention is also given to basic design concepts for smart actuators for aerospace plane control, a software package for the preliminary design of a helicopter, and multiconstraint wing optimization.

  16. A Multidisciplinary Approach to Health Monitoring and Materials Damage Prognosis for Metallic Aerospace Systems

    DTIC Science & Technology

    2013-03-01

    Structures/NDE, San Diego, CA, March 2010. 54. Soni, S., Kim, S. B ., and Chattopadhyay , A ., “Reference Free Fatigue Crack Detection, Localization and...S. B ., and Chattopadhyay , A ., “Fatigue Crack Detection and Localization using Reference-free Method,” Proceedings of SPIE, March 2010. 56. Mohanty...4V,” TMS Annual Meeting, Seattle, WA, Feb. 2010. 65. Kim, S. B ., Liu, K., Chattopadhyay , A ., “Application of a Hybrid PZT Actuation/FBG Sensor

  17. Air Force Global Weather Central System Architecture Study. Final System/Subsystem Summary Report. Volume 6. Aerospace Ground Equipment Plan

    DTIC Science & Technology

    1976-03-01

    1, 2, and 3) Volume 3 - Classified Requirements Topics (Secret) Volume 4 - Systems Analysis and Trade Studies Volume 5 - System Description ...General 18 3.1.1 End Item Description and Types of Functions 18 3.1.2 Factors Affecting Operating AGE 19 3.2 Operational Complex Operating Functions... Description of System (Maintenance Aspects) . . . 54 3.1.2 Development of Maintenance Complex 57 1v ■MML ""’:"irfcMiirMiiii i k ■ ■ ■ ’ wnwmf

  18. Aerospace engineering educational program

    NASA Technical Reports Server (NTRS)

    Craft, William; Klett, David; Lai, Steven

    1992-01-01

    The principle goal of the educational component of NASA CORE is the creation of aerospace engineering options in the mechanical engineering program at both the undergraduate and graduate levels. To accomplish this goal, a concerted effort during the past year has resulted in detailed plans for the initiation of aerospace options in both the BSME and MSME programs in the fall of 1993. All proposed new courses and the BSME aerospace option curriculum must undergo a lengthy approval process involving two cirriculum oversight committees (School of Engineering and University level) and three levels of general faculty approval. Assuming approval is obtained from all levels, the options will officially take effect in Fall '93. In anticipation of this, certain courses in the proposed curriculum are being offered during the current academic year under special topics headings so that current junior level students may graduate in May '94 under the BSME aerospace option. The proposed undergraduate aerospace option curriculum (along with the regular mechanical engineering curriculum for reference) is attached at the end of this report, and course outlines for the new courses are included in the appendix.

  19. Wireless Sensing Opportunities for Aerospace Applications

    NASA Technical Reports Server (NTRS)

    Wilson, William; Atkinson, Gary

    2007-01-01

    Wireless sensors and sensor networks is an emerging technology area with many applications within the aerospace industry. Integrated vehicle health monitoring (IVHM) of aerospace vehicles is needed to ensure the safety of the crew and the vehicle, yet often high costs, weight, size and other constraints prevent the incorporation of instrumentation onto spacecraft. This paper presents a few of the areas such as IVHM, where new wireless sensing technology is needed on both existing vehicles as well as future spacecraft. From ground tests to inflatable structures to the International Space Station, many applications could receive benefits from small, low power, wireless sensors. This paper also highlights some of the challenges that need to overcome when implementing wireless sensor networks for aerospace vehicles.

  20. Adaptive control with aerospace applications

    NASA Astrophysics Data System (ADS)

    Gadient, Ross

    Robust and adaptive control techniques have a rich history of theoretical development with successful application. Despite the accomplishments made, attempts to combine the best elements of each approach into robust adaptive systems has proven challenging, particularly in the area of application to real world aerospace systems. In this research, we investigate design methods for general classes of systems that may be applied to representative aerospace dynamics. By combining robust baseline control design with augmentation designs, our work aims to leverage the advantages of each approach. This research contributes the development of robust model-based control design for two classes of dynamics: 2nd order cascaded systems, and a more general MIMO framework. We present a theoretically justified method for state limiting via augmentation of a robust baseline control design. Through the development of adaptive augmentation designs, we are able to retain system performance in the presence of uncertainties. We include an extension that combines robust baseline design with both state limiting and adaptive augmentations. In addition we develop an adaptive augmentation design approach for a class of dynamic input uncertainties. We present formal stability proofs and analyses for all proposed designs in the research. Throughout the work, we present real world aerospace applications using relevant flight dynamics and flight test results. We derive robust baseline control designs with application to both piloted and unpiloted aerospace system. Using our developed methods, we add a flight envelope protecting state limiting augmentation for piloted aircraft applications and demonstrate the efficacy of our approach via both simulation and flight test. We illustrate our adaptive augmentation designs via application to relevant fixed-wing aircraft dynamics. Both a piloted example combining the state limiting and adaptive augmentation approaches, and an unpiloted example with

  1. Cognitive engineering in aerospace applications

    NASA Technical Reports Server (NTRS)

    Woods, David D.

    1993-01-01

    The progress that was made with respect to the objectives and goals of the research that is being carried out in the Cognitive Systems Engineering Laboratory (CSEL) under a Cooperative Agreement with NASA Ames Research Center is described. The major objective of this project is to expand the research base in Cognitive Engineering to be able to support the development and human-centered design of automated systems for aerospace applications. This research project is in support of the Aviation Safety/Automation Research plan and related NASA research goals in space applications.

  2. Integrated Systems Health Management for Intelligent Systems

    NASA Technical Reports Server (NTRS)

    Figueroa, Fernando; Melcher, Kevin

    2011-01-01

    The implementation of an integrated system health management (ISHM) capability is fundamentally linked to the management of data, information, and knowledge (DIaK) with the purposeful objective of determining the health of a system. Management implies storage, distribution, sharing, maintenance, processing, reasoning, and presentation. ISHM is akin to having a team of experts who are all individually and collectively observing and analyzing a complex system, and communicating effectively with each other in order to arrive at an accurate and reliable assessment of its health. In this chapter, concepts, procedures, and approaches are presented as a foundation for implementing an ISHM capability relevant to intelligent systems. The capability stresses integration of DIaK from all elements of a system, emphasizing an advance toward an on-board, autonomous capability. Both ground-based and on-board ISHM capabilities are addressed. The information presented is the result of many years of research, development, and maturation of technologies, and of prototype implementations in operational systems.

  3. Integrating homoeopathy in health systems.

    PubMed Central

    Poitevin, B.

    1999-01-01

    Homoeopathy is a therapy which involves many components and three main agents: the patient, with his or her condition and personal characteristics; the medication used, with its composition and manufacturing procedure; and the physician, with his or her approach to treatment and concepts of health. The development of research and evaluation structures, combined with a critical education in the discipline, would help to improve practices and define homoeopathy's potential role in relation to the other therapies, both conventional and unconventional, used in Western health systems. PMID:10083716

  4. Atmospheric statistics for aerospace vehicle operations

    NASA Technical Reports Server (NTRS)

    Smith, O. E.; Batts, G. W.

    1993-01-01

    Statistical analysis of atmospheric variables was performed for the Shuttle Transportation System (STS) design trade studies and the establishment of launch commit criteria. Atmospheric constraint statistics have been developed for the NASP test flight, the Advanced Launch System, and the National Launch System. The concepts and analysis techniques discussed in the paper are applicable to the design and operations of any future aerospace vehicle.

  5. [The pathogenetic approach to the development of tools and methods for the improvement of statokinetic stability in the operators of aerospace systems].

    PubMed

    Glaznikov, L A; Buĭnov, L G; Govorun, M I; Sorokina, L A; Nigmedzianov, R A; Golovanov, A E

    2012-01-01

    The objective of the present study was to estimate the efficacy of the tools and methods for the optimization of the activity of the central nervous system (CNS) and analyzers involved in the maintenance of the statokinetic (SK) stability in man. To this effect, we evaluated the outcome of bemitil treatment during 10 days with and without A.I. Yarotsky test and the influence of these procedures on the pathophysiological characteristics of selected elements of the work of operators of aerospace systems. Based on the data obtained in the study, the tools and methods have been developed that allow the efficacy and quality of certain aspects of the operators' activity to be improved, viz. general working capacity under conditions requiring enhanced statokinetic stability, self-confidence, emotional and somatic comfort.

  6. Advanced Materials and Coatings for Aerospace Applications

    NASA Technical Reports Server (NTRS)

    Miyoshi, Kazuhisa

    2004-01-01

    In the application area of aerospace tribology, researchers and developers must guarantee the highest degree of reliability for materials, components, and systems. Even a small tribological failure can lead to catastrophic results. The absence of the required knowledge of tribology, as Professor H.P. Jost has said, can act as a severe brake in aerospace vehicle systems-and indeed has already done so. Materials and coatings must be able to withstand the aerospace environments that they encounter, such as vacuum terrestrial, ascent, and descent environments; be resistant to the degrading effects of air, water vapor, sand, foreign substances, and radiation during a lengthy service; be able to withstand the loads, stresses, and temperatures encountered form acceleration and vibration during operation; and be able to support reliable tribological operations in harsh environments throughout the mission of the vehicle. This presentation id divided into two sections: surface properties and technology practice related to aerospace tribology. The first section is concerned with the fundamental properties of the surfaces of solid-film lubricants and related materials and coatings, including carbon nanotubes. The second is devoted to applications. Case studies are used to review some aspects of real problems related to aerospace systems to help engineers and scientists to understand the tribological issues and failures. The nature of each problem is analyzed, and the tribological properties are examined. All the fundamental studies and case studies were conducted at the NASA Glenn Research Center.

  7. NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 5: Aerospace librarians and technical information specialists as information intermediaries: A report of phase 2 activities of the NASA/DOD Aerospace Knowledge Diffusion Research Project

    NASA Technical Reports Server (NTRS)

    Pinelli, Thomas E.; Kennedy, John M.

    1990-01-01

    The objective of the NASA/DOD Aerospace Knowledge Diffusion Research Project is to provide descriptive and analytical data regarding the flow of scientific and technical information (STI) at the individual, organizational, national, and international levels, placing emphasis on the systems used to diffuse the results of federally funded aerospace STI. An overview of project assumptions, objectives, and design is presented and preliminary results of the phase 2 aerospace library survey are summarized. Phase 2 addressed aerospace knowledge transfer and use within the larger social system and focused on the flow of aerospace STI in government and industry and the role of the information intermediary in knowledge transfer.

  8. Common Cause Failure Modeling: Aerospace Versus Nuclear

    NASA Technical Reports Server (NTRS)

    Stott, James E.; Britton, Paul; Ring, Robert W.; Hark, Frank; Hatfield, G. Spencer

    2010-01-01

    Aggregate nuclear plant failure data is used to produce generic common-cause factors that are specifically for use in the common-cause failure models of NUREG/CR-5485. Furthermore, the models presented in NUREG/CR-5485 are specifically designed to incorporate two significantly distinct assumptions about the methods of surveillance testing from whence this aggregate failure data came. What are the implications of using these NUREG generic factors to model the common-cause failures of aerospace systems? Herein, the implications of using the NUREG generic factors in the modeling of aerospace systems are investigated in detail and strong recommendations for modeling the common-cause failures of aerospace systems are given.

  9. Combustion Processes in the Aerospace Environment

    NASA Technical Reports Server (NTRS)

    Huggett, Clayton

    1969-01-01

    The aerospace environment introduces new and enhanced fire hazards because the special atmosphere employed may increase the frequency and intensity of fires, because the confinement associated with aerospace systems adversely affects the dynamics of fire development and control, and because the hostile external environments limit fire control and rescue operations. Oxygen enriched atmospheres contribute to the fire hazard in aerospace systems by extending the list of combustible fuels, increasing the probability of ignition, and increasing the rates of fire spread and energy release. A system for classifying atmospheres according to the degree of fire hazard, based on the heat capacity of the atmosphere per mole of oxygen, is suggested. A brief exploration of the dynamics of chamber fires shows that such fires will exhibit an exponential growth rate and may grow to dangerous size in a very short time. Relatively small quantities of fuel and oxygen can produce a catastrophic fire in a closed chamber.

  10. Public health law research: exploring law in public health systems.

    PubMed

    Ibrahim, Jennifer K; Burris, Scott; Hays, Scott

    2012-11-01

    The importance of law in the organization and operation of public health systems has long been a matter of interest to public health lawyers and practitioners, but empirical research on law as a factor in health system performance has been limited in quantity and sophistication. The emergence of Public Health Law Research and Public Health Systems and Services Research within a coordinated effort to strengthen public health research and practice has dramatically changed matters. This article introduces Public Health Law Research as an integral part of Public Health Systems and Services Research, discusses the challenges of integrating the 2 fields, and highlights 2 examples of current research that demonstrate the benefits of an integrated approach to improve the use of law in public health practice.

  11. NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 26: The relationship between technology policy and scientific and technical information within the US and Japanese aerospace industries

    NASA Technical Reports Server (NTRS)

    Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

    1993-01-01

    Government technology policy has nurtured the growth of the aerospace industry which is vital to both the U.S. and Japanese economies. Japanese technology policy differs significantly from U.S. technology policy, however, particularly with respect to the production, transfer, and use of scientific and technical information (STI). In this paper, we discuss the unique position of the aerospace industry in the U.S. and Japan, U.S. and Japanese aerospace policy, and the role of STI in the process of aerospace innovation. The information-seeking behaviors of U.S. and Japanese aerospace engineers and scientists are compared. The authors advocate the development of innovation-adoption technology and STI policy goals for U.S. aerospace and the inclusion of an aerospace knowledge diffusion transfer system with an 'active' component for scanning and acquiring foreign aerospace technology and STI.

  12. [Professional health cards (CPS): informatic health care system in France].

    PubMed

    Fortuit, P

    2005-09-01

    The Professional Health Card Public interest group (Groupement d'Intérêt Public-Carte de professionnel de Santé (GIP-CPS)) was founded in 1993 as a joint initiative by the different parties involved in health care in France: the state, the representatives of the health care professions and the compulsory and complementary health insurance organizations. The CPS system enables safe exchange and electronic sharing of medical data. Via Intranet connections and Extranet hosting of medical files, databases, the CPS system enables health care professionals who access servers to be identified with certainty. For email exhanges, the CPS systems guarantees the sender's identity and capacity. The electronic signature gives legal value to the email. The system also enables confidential email. The health card system (CPS) contributes to making the health service efficient. Shared medical files, health care networks, health warning systems or electronic requests for reimbursement of health insurance expenses all use the CPS system. More than 300,000 health care professionals use it regularly. The freedom of movement of patients throughout Europe has led to the growth of exchanges and information sharing between health professionals in the States of the Union. More and more health professionals will be leaving their own countries to work in foreign countries in the future. It is essential that their freedom of movement is accompanied by the ability to prove their rights to practice.

  13. [The health system of Argentina].

    PubMed

    Belló, Mariana; Becerril-Montekio, Victor M

    2011-01-01

    This paper describes the health system of Argentina.This system has three sectors: public, social security and private.The public sector includes the national and provincial ministries as well as the network of public hospitals and primary health care units which provide care to the poor and uninsured population. This sector is financed with taxes and payments made by social security beneficiaries that use public health care facilities. The social security sector or Obras Sociales (OS) covers all workers of the formal economy and their families. Most OS operate through contracts with private providers and are financed with payroll contributions of employers and employees. Finally, the private sector includes all those private providers offering services to individuals, OS beneficiaries and all those with private health insurance.This sector also includes private insurance agencies called Prepaid Medicine Enterprises, financed mostly through premiums paid by families and/or employers.This paper also discusses some of the recent innovations implemented in Argentina, including the program Remediar.

  14. Energy Systems and Population Health

    SciTech Connect

    Ezzati, Majid; Bailis, Rob; Kammen, Daniel M.; Holloway, Tracey; Price, Lynn; Cifuentes, Luis A.; Barnes, Brendon; Chaurey, Akanksha; Dhanapala, Kiran N.

    2004-04-12

    It is well-documented that energy and energy systems have a central role in social and economic development and human welfare at all scales, from household and community to regional and national (41). Among its various welfare effects, energy is closely linked with people s health. Some of the effects of energy on health and welfare are direct. With abundant energy, more food or more frequent meals can be prepared; food can be refrigerated, increasing the types of food items that are consumed and reducing food contamination; water pumps can provide more water and eliminate the need for water storage leading to contamination or increased exposure to disease vectors such as mosquitoes or snails; water can be disinfected by boiling or using other technologies such as radiation. Other effects of energy on public health are mediated through more proximal determinants of health and disease. Abundant energy can lead to increased irrigation, agricultural productivity, and access to food and nutrition; access to energy can also increase small-scale income generation such as processing of agricultural commodities (e.g., producing refined oil from oil seeds, roasting coffee, drying and preserving fruits and meats) and production of crafts; ability to control lighting and heating allows education or economic activities to be shielded from daily or seasonal environmental constraints such as light, temperature, rainfall, or wind; time and other economic resources spent on collecting and/or transporting fuels can be used for other household needs if access to energy is facilitated; energy availability for transportation increases access to health and education facilities and allow increased economic activity by facilitating the transportation of goods and services to and from markets; energy for telecommunication technology (radio, television, telephone, or internet) provides increased access to information useful for health, education, or economic purposes; provision of energy

  15. Aerospace technology transfer to breast cancer imaging

    NASA Astrophysics Data System (ADS)

    Winfield, Daniel L.

    In the United States in 1996, an estimated 44,560 women died of breast cancer, and 184,300 new cases were diagnosed. Advances in space technology are now making significant improvements in the imaging technologies used in managing this important foe. The first of these spinoffs, a digital spot mammography system used to perform stereotactic fine-needle breast biopsy, uses a backside-thinned CCD developed originally for the Space Telescope Imaging Spectrometer. This paper describes several successful biomedical applications which have resulted from collaborative technology transfer programs between the National Aeronautics and Space Administration (NASA), the National Cancer Institute (NCI), and the U. S. Dept. of Health and Human Services Office on Women's Health (OWH). These programs have accelerated the introduction of direct digital mammography by two years. In follow-on work, RTI is now assisting the HHS Office on Women's Health to identify additional opportunities for transfer of aerospace, defense, and intelligence technologies to image-guided detection, diagnosis, and treatment of breast cancer. The technology identification and evaluation effort culminated in a May 1997 workshop, and the formative technology development partnerships are discussed.

  16. Aerospace technology transfer to breast cancer imaging.

    PubMed

    Winfield, D L

    1997-01-01

    In the United States in 1996, an estimated 44,560 women died of breast cancer, and 184,300 new cases were diagnosed. Advances in space technology are now making significant improvements in the imaging technologies used in managing this important foe. The first of these spinoffs, a digital spot mammography system used to perform stereotactic fine-needle breast biopsy, uses a backside-thinned CCD developed originally for the Space Telescope Imaging Spectrometer. This paper describes several successful biomedical applications which have resulted from collaborative technology transfer programs between the National Aeronautics and Space Administration (NASA), the National Cancer Institute (NCI), and the U.S. Dept. of Health and Human Services Office on Women's Health (OWH). These programs have accelerated the introduction of direct digital mammography by two years. In follow-on work, RTI is now assisting the HHS Office on Women's Health to identify additional opportunities for transfer of aerospace, defense, and intelligence technologies to image-guided detection, diagnosis, and treatment of breast cancer. The technology identification and evaluation effort culminated in a May 1997 workshop, and the formative technology development partnerships are discussed.

  17. Aerospace Education. NSTA Position Statement

    ERIC Educational Resources Information Center

    National Science Teachers Association (NJ1), 2008

    2008-01-01

    National Science Teachers Association (NSTA) has developed a new position statement, "Aerospace Education." NSTA believes that aerospace education is an important component of comprehensive preK-12 science education programs. This statement highlights key considerations that should be addressed when implementing a high quality aerospace education…

  18. Multipurpose Health Care Telemedicine System

    DTIC Science & Technology

    2007-11-02

    place to the base unit (consultation site). The transmission is performed through GSM, Satellite links or POTS . Using this device a specialist...standardized medical protocol. Keywords – Emergency Health Care Telemedicine, GSM, Satellite, POTS I. INTRODUCTION The availability of prompt and expert...of communication means (Satellite, GSM and Plain Old Telephony System - POTS ). The base unit is comprised of a set of user-friendly software

  19. Aerospace reliability applied to biomedicine.

    NASA Technical Reports Server (NTRS)

    Lalli, V. R.; Vargo, D. J.

    1972-01-01

    An analysis is presented that indicates that the reliability and quality assurance methodology selected by NASA to minimize failures in aerospace equipment can be applied directly to biomedical devices to improve hospital equipment reliability. The Space Electric Rocket Test project is used as an example of NASA application of reliability and quality assurance (R&QA) methods. By analogy a comparison is made to show how these same methods can be used in the development of transducers, instrumentation, and complex systems for use in medicine.

  20. Bioelectrocatalytic systems for health applications.

    PubMed

    Sekretaryova, Alina N; Eriksson, Mats; Turner, Anthony P F

    2016-01-01

    We present a brief overview of bioelectrocatalytic devices for in vitro health applications, including food safety and environmental analysis, focusing on microelectrode- and microfluidic-based biosensors, paper-based point-of-care devices and wearable biosensors. The main hurdles and future perspectives are discussed. We then consider the role of electron transfer between a biocatalyst and an electrode in biosensor design. Brief descriptions of indirect, direct and mediated mechanisms are given. The principal strategies, as well as recent developments for modulation of electron transfer in biocatalytic systems are summarised. In conclusion, we highlight some of the challenges associated with improving these redox systems.

  1. Aerospace Meteorology Lessons Learned Relative to Aerospace Vehicle Design and Operations

    NASA Technical Reports Server (NTRS)

    Vaughan, William W.; Anderson, B. Jeffrey

    2004-01-01

    Aerospace Meteorology came into being in the 1950s as the development of rockets for military and civilian usage grew in the United States. The term was coined to identify those involved in the development of natural environment models, design/operational requirements, and environment measurement systems to support the needs of aerospace vehicles, both launch vehicles and spacecraft. It encompassed the atmospheric environment of the Earth, including Earth orbit environments. Several groups within the United States were active in this area, including the Department of Defense, National Aeronautics and Space Administration, and a few of the aerospace industry groups. Some aerospace meteorology efforts were similar to those being undertaken relative to aviation interests. As part of the aerospace meteorology activities a number of lessons learned resulted that produced follow on efforts which benefited from these experiences, thus leading to the rather efficient and technologically current descriptions of terrestrial environment design requirements, prelaunch monitoring systems, and forecast capabilities available to support the development and operations of aerospace vehicles.

  2. Vapor cycle compressors for aerospace vehicle thermal management

    NASA Astrophysics Data System (ADS)

    Dexter, Peter F.; Watts, Roland J.; Haskin, William L.

    1990-10-01

    An overview is given of approaches to achieving high reliability and long life in vapor cycle compressor design for aerospace vehicles. The requirements peculiar to aircraft and spacecraft cooling systems are described. Piston, rotary vane, rolling piston, helical screw, scroll, and centrifugal compressors being developed for aerospace applications are discussed.

  3. [Application of lower body negative pressure (LBNP) in aerospace medicine].

    PubMed

    Wu, Ping; Xie, Bao-sheng; Huang, Wei-fen

    2002-06-01

    Effects of LBNP is similar to that produced by gravitational force, especially as a stress factor on the cardiovascular system as has been concerned in the area of aerospace medicine. This paper described experimental equipment, methods and physiological effects of LBNP, especially its application in the area of aerospace medicine. Several aspects for future research were put forward.

  4. Aerospace at Saint Francis.

    ERIC Educational Resources Information Center

    Aviation/Space, 1980

    1980-01-01

    Discusses an aviation/aerospace program as a science elective for 11th and 12th year students. This program is multi-faceted and addresses the needs of a wide variety of students. Its main objective is to present aviation and space sciences which will provide a good base for higher education in these areas. (SK)

  5. Aerospace applications of batteries

    NASA Technical Reports Server (NTRS)

    Habib, Shahid

    1993-01-01

    NASA has developed battery technology to meet the demanding requirements for aerospace applications; specifically, the space vacuum, launch loads, and high duty cycles. Because of unique requirements and operating environments associated with space applications, NASA has written its own standards and specifications for batteries.

  6. Aerospace Bibliography, Third Edition.

    ERIC Educational Resources Information Center

    National Aeronautics and Space Administration, Washington, DC.

    This third edition bibliography lists books and teaching aids related to aeronautics and space. Aeronautics titles are limited to aerospace-related research subjects, and books on astronomy to those directly related to space exploration. Also listed are pertinent references like pamphlets, films, film strips, booklets, charts, pictures,…

  7. Aerospace technology comes home.

    PubMed

    Coleman, C

    1997-07-01

    Science is expanding the options for homebound patients. Many of the new technologies coming into the home care industry are the result of aerospace innovations. What are these new technologies, and what can the home care industry expect to see in the future.

  8. Aerospace Bibliography. Seventh Edition.

    ERIC Educational Resources Information Center

    Blashfield, Jean F., Comp.

    Provided for teachers and the general adult reader is an annotated and graded list of books and reference materials dealing with aerospace subjects. Only non-fiction books and pamphlets that need to be purchased from commercial or government sources are included. Free industrial materials and educational aids are not included because they tend to…

  9. The 18th Aerospace Mechanisms Symposium

    NASA Technical Reports Server (NTRS)

    1984-01-01

    Topics concerning aerospace mechanisms, their functional performance, and design specifications are presented. Discussed subjects include the design and development of release mechanisms, actuators, linear driver/rate controllers, antenna and appendage deployment systems, position control systems, and tracking mechanisms for antennas and solar arrays. Engine design, spaceborne experiments, and large space structure technology are also examined.

  10. Application of Smart Solid State Sensor Technology in Aerospace Applications

    NASA Technical Reports Server (NTRS)

    Hunter, Gary W.; Xu, Jennifer C.; Dungan, L.K.; Makel, D.; Ward, B.; Androjna, D.

    2008-01-01

    Aerospace applications require a range of chemical sensing technologies to monitor conditions in both space vehicles and aircraft operations. One example is the monitoring of oxygen. For example, monitoring of ambient oxygen (O2) levels is critical to ensuring the health, safety, and performance of humans living and working in space. Oxygen sensors can also be incorporated in detection systems to determine if hazardous leaks are occurring in space propulsion systems and storage facilities. In aeronautic applications, O2 detection has been investigated for fuel tank monitoring. However, as noted elsewhere, O2 is not the only species of interest in aerospace applications with a wide range of species of interest being relevant to understand an environmental or vehicle condition. These include combustion products such as CO, HF, HCN, and HCl, which are related to both the presence of a fire and monitoring of post-fire clean-up operations. This paper discusses the development of an electrochemical cell platform based on a polymer electrolyte, NAFION, and a three-electrode configuration. The approach has been to mature this basic platform for a range of applications and to test this system, combined with "Lick and Stick" electronics, for its viability to monitor an environment related to astronaut crew health and safety applications with an understanding that a broad range of applications can be addressed with a core technology.

  11. Development of the Choctaw Health Delivery System.

    ERIC Educational Resources Information Center

    Nguyen, Binh N.

    The Choctaw Tribe is the first and only tribe to develop a health delivery system to take over an existing Indian Health Service inpatient facility. The takeover was accomplished in January 1984 under the Indian Self-Determination Act through a contract with the Indian Health Service. The Choctaw Health Delivery System includes a 35-bed general…

  12. Chemical, mechanical and antibacterial properties of silver nanocluster/silica composite coated textiles for safety systems and aerospace applications

    NASA Astrophysics Data System (ADS)

    Ferraris, S.; Perero, S.; Miola, M.; Vernè, E.; Rosiello, A.; Ferrazzo, V.; Valletta, G.; Sanchez, J.; Ohrlander, M.; Tjörnhammar, S.; Fokine, M.; Laurell, F.; Blomberg, E.; Skoglund, S.; Odnevall Wallinder, I.; Ferraris, M.

    2014-10-01

    This work describes the chemical, mechanical and antibacterial properties of a novel silver nanocluster/silica composite coating, obtained by sputtering, on textiles for use in nuclear bacteriological and chemical (NBC) protection suites and for aerospace applications. The properties of the coated textiles were analyzed in terms of surface morphology, silver concentration and silver release in artificial sweat and synthetic tap water, respectively. No release of silver nanoparticles was observed at given conditions. The water repellency, permeability, flammability and mechanical resistance of the textiles before and after sputtering demonstrated that the textile properties were not negatively affected by the coating. The antibacterial effect was evaluated at different experimental conditions using a standard bacterial strain of Staphylococcus aureus and compared with the behavior of uncoated textiles. The coating process conferred all textiles a good antibacterial activity. Optimal deposition conditions were elaborated to obtain sufficient antibacterial action without altering the aesthetical appearance of the textiles. The antibacterial coating retained its antibacterial activity after one cycle in a washing machine only for the Nylon based textile.

  13. Load monitoring of aerospace structures utilizing micro-electro-mechanical systems for static and quasi-static loading conditions

    NASA Astrophysics Data System (ADS)

    Martinez, M.; Rocha, B.; Li, M.; Shi, G.; Beltempo, A.; Rutledge, R.; Yanishevsky, M.

    2012-11-01

    The National Research Council Canada (NRC) has worked on the development of structural health monitoring (SHM) test platforms for assessing the performance of sensor systems for load monitoring applications. The first SHM platform consists of a 5.5 m cantilever aluminum beam that provides an optimal scenario for evaluating the ability of a load monitoring system to measure bending, torsion and shear loads. The second SHM platform contains an added level of structural complexity, by consisting of aluminum skins with bonded/riveted stringers, typical of an aircraft lower wing structure. These two load monitoring platforms are well characterized and documented, providing loading conditions similar to those encountered during service. In this study, a micro-electro-mechanical system (MEMS) for acquiring data from triads of gyroscopes, accelerometers and magnetometers is described. The system was used to compute changes in angles at discrete stations along the platforms. The angles obtained from the MEMS were used to compute a second, third or fourth order degree polynomial surface from which displacements at every point could be computed. The use of a new Kalman filter was evaluated for angle estimation, from which displacements in the structure were computed. The outputs of the newly developed algorithms were then compared to the displacements obtained from the linear variable displacement transducers connected to the platforms. The displacement curves were subsequently post-processed either analytically, or with the help of a finite element model of the structure, to estimate strains and loads. The estimated strains were compared with baseline strain gauge instrumentation installed on the platforms. This new approach for load monitoring was able to provide accurate estimates of applied strains and shear loads.

  14. Applications of nonlinear system identification to structural health monitoring.

    SciTech Connect

    Farrar, C. R.; Sohn, H.; Robertson, A. N.

    2004-01-01

    The process of implementing a damage detection strategy for aerospace, civil and mechanical engineering infrastructure is referred to as structural health monitoring (SHM). In many cases damage causes a structure that initially behaves in a predominantly linear manner to exhibit nonlinear response when subject to its operating environment. The formation of cracks that subsequently open and close under operating loads is an example of such damage. The damage detection process can be significantly enhanced if one takes advantage of these nonlinear effects when extracting damage-sensitive features from measured data. This paper will provide an overview of nonlinear system identification techniques that are used for the feature extraction process. Specifically, three general approaches that apply nonlinear system identification techniques to the damage detection process are discussed. The first two approaches attempt to quantify the deviation of the system from its initial linear characteristics that is a direct result of damage. The third approach is to extract features from the data that are directly related to the specific nonlinearity associated with the damaged condition. To conclude this discussion, a summary of outstanding issues associated with the application of nonlinear system identification techniques to the SHM problem is presented.

  15. Aerospace concurrent engineering: a modern global approach

    NASA Astrophysics Data System (ADS)

    Imbert, Mariano; Li, Xiaoxing

    2009-12-01

    System engineering aspects, like concurrent engineering (CE) in the aerospace sector, has been studied by many authors. The change and evolution in this regard is continually influenced by the information technology advances. But global cooperation is only discussed by developed countries and high technology corporations. A review of CE and its ramifications in the aerospace industry is presented. Based on the current literature, the general lifecycle of a spacecraft and its phases are explained as well as the tools that are implemented in today's industry. In this paper we propose a new approach for the product development process in the spacecraft production industry the Aerospace Concurrent Engineering (ACE), which is mainly focused in the technology itself, its optimal design and environment impact rather than costs and marketing impact. And the potential of globally oriented research and implementation of space programs is discussed for its consideration.

  16. Sealed aerospace metal-hydride batteries

    NASA Technical Reports Server (NTRS)

    Coates, Dwaine

    1992-01-01

    Nickel metal hydride and silver metal hydride batteries are being developed for aerospace applications. There is a growing market for smaller, lower cost satellites which require higher energy density power sources than aerospace nickel-cadmium at a lower cost than space nickel-hydrogen. These include small LEO satellites, tactical military satellites and satellite constellation programs such as Iridium and Brilliant Pebbles. Small satellites typically do not have the spacecraft volume or the budget required for nickel-hydrogen batteries. NiCd's do not have adequate energy density as well as other problems such as overcharge capability and memory effort. Metal hydride batteries provide the ideal solution for these applications. Metal hydride batteries offer a number of advantages over other aerospace battery systems.

  17. NSWC Crane Aerospace Cell Test History Database

    NASA Technical Reports Server (NTRS)

    Brown, Harry; Moore, Bruce

    1994-01-01

    The Aerospace Cell Test History Database was developed to provide project engineers and scientists ready access to the data obtained from testing of aerospace cell designs at Naval Surface Warfare Center, Crane Division. The database is intended for use by all aerospace engineers and scientists involved in the design of power systems for satellites. Specifically, the database will provide a tool for project engineers to review the progress of their test at Crane and to have ready access to data for evaluation. Additionally, the database will provide a history of test results that designers can draw upon to answer questions about cell performance under certain test conditions and aid in selection of a cell for a satellite battery. Viewgraphs are included.

  18. 48 CFR 1852.244-70 - Geographic participation in the aerospace program.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... in the aerospace program. 1852.244-70 Section 1852.244-70 Federal Acquisition Regulations System... CLAUSES Texts of Provisions and Clauses 1852.244-70 Geographic participation in the aerospace program. As prescribed in 1844.204-70, insert the following clause: Geographic Participation in the Aerospace...

  19. 48 CFR 1852.244-70 - Geographic participation in the aerospace program.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... in the aerospace program. 1852.244-70 Section 1852.244-70 Federal Acquisition Regulations System... CLAUSES Texts of Provisions and Clauses 1852.244-70 Geographic participation in the aerospace program. As prescribed in 1844.204-70, insert the following clause: Geographic Participation in the Aerospace...

  20. 48 CFR 1852.244-70 - Geographic participation in the aerospace program.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... in the aerospace program. 1852.244-70 Section 1852.244-70 Federal Acquisition Regulations System... CLAUSES Texts of Provisions and Clauses 1852.244-70 Geographic participation in the aerospace program. As prescribed in 1844.204-70, insert the following clause: Geographic Participation in the Aerospace...

  1. 48 CFR 1852.244-70 - Geographic participation in the aerospace program.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... in the aerospace program. 1852.244-70 Section 1852.244-70 Federal Acquisition Regulations System... CLAUSES Texts of Provisions and Clauses 1852.244-70 Geographic participation in the aerospace program. As prescribed in 1844.204-70, insert the following clause: Geographic Participation in the Aerospace...

  2. 76 FR 435 - Airworthiness Directives; B/E Aerospace Protective Breathing Equipment (PBE) Part Number 119003...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-05

    ...-141-AD; Amendment 39-16562; AD 2011-01-09] RIN 2120-AA64 Airworthiness Directives; B/E Aerospace... service information identified in this AD, contact B/E Aerospace, Inc., Commercial Aircraft Products Group.... FOR FURTHER INFORMATION CONTACT: David Fairback, Aerospace Engineer, Systems and Propulsion...

  3. 48 CFR 1852.244-70 - Geographic participation in the aerospace program.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... the aerospace program. 1852.244-70 Section 1852.244-70 Federal Acquisition Regulations System NATIONAL... Provisions and Clauses 1852.244-70 Geographic participation in the aerospace program. As prescribed in 1844.204-70, insert the following clause: Geographic Participation in the Aerospace Program (APR 1985)...

  4. [The health system of Dominican Republic].

    PubMed

    Rathe, Magdalena; Moliné, Alejandro

    2011-01-01

    This paper describes the health conditions in Dominican Republic and the characteristics of the Dominican health system, including its structure and coverage, its financial sources, the health expenditure, the physical, material and human resources available, the stewardship functions developed by the Ministry of Public Health and the generation of health information. The participation of health care users in the operation and evaluation of the system and the most recent policy innovations, including the new General Health Law, the new Social Security Law and the Decennial Health Plan are also discussed.

  5. Aerospace Environmental Technology Conference: Exectutive summary

    NASA Technical Reports Server (NTRS)

    Whitaker, A. F. (Editor)

    1995-01-01

    The mandated elimination of CFC's, Halons, TCA, and other ozone depleting chemicals and specific hazardous materials has required changes and new developments in aerospace materials and processes. The aerospace industry has been involved for several years in providing product substitutions, redesigning entire production processes, and developing new materials that minimize or eliminate damage to the environment. These activities emphasize replacement cleaning solvents and their application verifications, compliant coatings including corrosion protection systems, and removal techniques, chemical propulsion effects on the environment, and the initiation of modifications to relevant processing and manufacturing specifications and standards. The papers from this conference are being published in a separate volume as NASA CP-3298.

  6. Automation technology for aerospace power management

    NASA Technical Reports Server (NTRS)

    Larsen, R. L.

    1982-01-01

    The growing size and complexity of spacecraft power systems coupled with limited space/ground communications necessitate increasingly automated onboard control systems. Research in computer science, particularly artificial intelligence has developed methods and techniques for constructing man-machine systems with problem-solving expertise in limited domains which may contribute to the automation of power systems. Since these systems perform tasks which are typically performed by human experts they have become known as Expert Systems. A review of the current state of the art in expert systems technology is presented, and potential applications in power systems management are considered. It is concluded that expert systems appear to have significant potential for improving the productivity of operations personnel in aerospace applications, and in automating the control of many aerospace systems.

  7. [The health system of El Salvador].

    PubMed

    Acosta, Mónica; Sáenz, María del Rocío; Gutiérrez, Blanca; Bermúdez, Juan Luis

    2011-01-01

    This paper describes the health conditions in El Salvador and the main característics of the Salvadoran health system, including its structure and coverage, its financial sources, the physical, material and human resources available, the stewardship functions developed by the Ministry of Public Health, and the participation of health care users in the evaluation of the system. It also discusses the most recent policy innovations including the approval of the Law for the Creation of the National Health System, which intends to expand coverage, reduce health inequalities and improve the coordination of public health institutions.

  8. Existing public health surveillance systems for mental health in China.

    PubMed

    Zhou, Wei; Xiao, Shuiyuan

    2015-01-01

    Mental health is a challenging public health issue worldwide and surveillance is crucial for it. However, mental health surveillance has not been developed until recently in certain developed countries; many other countries, especially developing countries, have poor or even no health information systems. This paper presents surveillance related to mental health in China, a developing country with a large population of patients with mental disorders. Detailed information of seven relevant surveillance systems is introduced respectively. From the perspective of utilization, problems including accessibility, comprehensiveness and data quality are discussed. Suggestions for future development are proposed.

  9. Trends in aerospace structures

    NASA Technical Reports Server (NTRS)

    Card, M. F.

    1978-01-01

    Recent developments indicate that there may soon be a revolution in aerospace structures. Increases in allowable operational stress levels, utilization of high-strength, high-toughness materials, and new structural concepts will highlight this advancement. Improved titanium and aluminum alloys and high-modulus, high-strength advanced composites, with higher specific properties than aluminum and high-strength nickel alloys, are expected to be the principal materials. Significant advances in computer technology will cause major changes in the preliminary design cycle and permit solutions of otherwise too-complex interactive structural problems and thus the development of vehicles and components of higher performance. The energy crisis will have an impact on material costs and choices and will spur the development of more weight-efficient structures. There will also be significant spinoffs of aerospace structures technology, particularly in composites and design/analysis software.

  10. Applications of aerospace technology

    NASA Technical Reports Server (NTRS)

    Rouse, Doris J.

    1984-01-01

    The objective of the Research Triangle Institute Technology Transfer Team is to assist NASA in achieving widespread utilization of aerospace technology in terrestrial applications. Widespread utilization implies that the application of NASA technology is to benefit a significant sector of the economy and population of the Nation. This objective is best attained by stimulating the introduction of new or improved commercially available devices incorporating aerospace technology. A methodology is presented for the team's activities as an active transfer agent linking NASA Field Centers, industry associations, user groups, and the medical community. This methodology is designed to: (1) identify priority technology requirements in industry and medicine, (2) identify applicable NASA technology that represents an opportunity for a successful solution and commercial product, (3) obtain the early participation of industry in the transfer process, and (4) successfully develop a new product based on NASA technology.

  11. Aerospace Concepts at the Elementary Level

    ERIC Educational Resources Information Center

    Journal of Aerospace Education, 1975

    1975-01-01

    Presents materials compiled to assist the elementary teacher in preparing teaching units in aerospace education. Suggests specific and general objectives and lists important concepts and questions pertaining to areas such as: history of flight, weather and flying, airplanes, jets, rockets, space travel, and the solar system. (MLH)

  12. An Aerospace Nation

    DTIC Science & Technology

    2016-05-25

    aircraft order share of Boeing or Air - bus in recent years.24 America’s leadership in the high-technology sector is also faltering and, if not corrected...Executive Order 9781, establishing the Air Coordinating Commit- tee, with the mission to “examine aviation problems and development affecting more...robotics, drones, information technologies, energy research, and aerospace design. Establish a New Air and Space Structure Like its predecessor

  13. Aerospace safety advisory panel

    NASA Technical Reports Server (NTRS)

    1994-01-01

    This report from the Aerospace Safety Advisory Panel (ASAP) contains findings, recommendations, and supporting material concerning safety issues with the space station program, the space shuttle program, aeronautics research, and other NASA programs. Section two presents findings and recommendations, section three presents supporting information, and appendices contain data about the panel membership, the NASA response to the March 1993 ASAP report, and a chronology of the panel's activities during the past year.

  14. Wiring for aerospace applications

    NASA Technical Reports Server (NTRS)

    Christian, J. L., Jr.; Dickman, J. E.; Bercaw, R. W.; Myers, I. T.; Hammoud, A. N.; Stavnes, M.; Evans, J.

    1992-01-01

    In this paper, the authors summarize the current state of knowledge of arc propagation in aerospace power wiring and efforts by the National Aeronautics and Space Administration (NASA) towards the understanding of the arc tracking phenomena in space environments. Recommendations will be made for additional testing. A database of the performance of commonly used insulating materials will be developed to support the design of advanced high power missions, such as Space Station Freedom and Lunar/Mars Exploration.

  15. Integrating child health information systems in public health agencies.

    PubMed

    Bara, Debra; McPhillips-Tangum, Carol; Wild, Ellen L; Mann, Marie Y

    2009-01-01

    Public health agencies at state and local levels are integrating information systems to improve health outcomes for children. An assessment was conducted to describe the extent to which public health agencies are currently integrating child health information systems (CHIS). Using online technology information was collected, to assess completed and planned activities related to integration of CHIS, maturity of these systems, and factors that influence decisions by public health agencies to pursue integration activities. Of the 39 public health agencies that participated, 18 (46%) reported already integrating some or all of their CHIS, and 13 (33%) reported to be planning to integrate during the next 3 years. Information systems most commonly integrated include Early Hearing Detection and Intervention (EHDI), immunization, vital records, and Newborn Dried Bloodspot Screening (NDBS). Given the high priority that has been placed on using technology to improve health status in the United States, the emphasis on expanding the capability for the electronic exchange of health information, and federal support for electronic health records by 2014, public health agencies should be encouraged and supported in their efforts to develop, implement, and maintain integrated CHIS to facilitate the electronic exchange of health information with the clinical healthcare sector.

  16. Sexual and reproductive health and rights in changing health systems

    PubMed Central

    Sen, Gita; Govender, Veloshnee

    2015-01-01

    Sexual and reproductive health and rights (SRHR) are centrally important to health. However, there have been significant shortcomings in implementing SRHR to date. In the context of health systems reform and universal health coverage/care (UHC), this paper explores the following questions. What do these changes in health systems thinking mean for SRHR and gender equity in health in the context of renewed calls for increased investments in the health of women and girls? Can SRHR be integrated usefully into the call for UHC, and if so how? Can health systems reforms address the continuing sexual and reproductive ill health and violations of sexual and reproductive rights (SRR)? Conversely, can the attention to individual human rights that is intrinsic to the SRHR agenda and its continuing concerns about equality, quality and accountability provide impetus for strengthening the health system? The paper argues that achieving equity on the UHC path will require a combination of system improvements and services that benefit all, together with special attention to those whose needs are great and who are likely to fall behind in the politics of choice and voice (i.e., progressive universalism paying particular attention to gender inequalities). PMID:25536851

  17. [Human resources for local health systems].

    PubMed

    Linger, C

    1989-01-01

    The economic and social crises affecting Latin America have had a profound social and political effect on its structures. This paper analyzes this impact from 2 perspectives: 1) the impact on the apparatus of the state, in particular on its health infra-structures; and 2) the direction of the democratic process in the continent and the participatory processes of civil societies. The institutionalization of the Local Health Systems (SILOS) is an effort to analyze the problem from within the health sector and propose solutions. This paper discusses the issues of human resource development in health systems; training in human resource development and human resource development in local health care systems. There are 3 strategies used to change health systems: 1) The judicial-political system: The state's apparatus 2) The political-administrative system: the national health care system; and 3) the political-operative system: local health care systems. To assure implementation of SILOS there are 4 steps to be followed: 1) create political conditions that allow the transformation and development of local health systems; 2) development of high-level institutional and political initiatives to develop health care networks; 3) offer key players institutional space and social action to develop the SILOS process; 4) rapidly develop SILOS in regions to assure its integration with other development efforts. The labor force in the health sector and organized communities play critical roles in proposing and institutionalizing health programs.

  18. Nonlinear modeling of an aerospace object dynamics

    NASA Astrophysics Data System (ADS)

    Davydov, I. E.; Davydov, E. I.

    2017-01-01

    Here are presented the scientific results, obtained by motion modeling of complicated technical systems of aerospace equipment with consideration of nonlinearities. Computerized panel that allows to measure mutual influence of the system's motion and stabilization device with consideration of its real characteristics has been developed. Analysis of motion stability of a system in general has been carried out and time relationships of the system's motion taking in account nonlinearities are presented.

  19. Development and Evaluation of Sensor Concepts for Ageless Aerospace Vehicles: Report 4 - Phase 1 Implementation of the Concept Demonstrator

    NASA Technical Reports Server (NTRS)

    Abbott, David; Batten, Adam; Carpenter, David; Dunlop, John; Edwards, Graeme; Farmer, Tony; Gaffney, Bruce; Hedley, Mark; Hoschke, Nigel; Isaacs, Peter; Johnson, Mark; Lewis, Chris; Murdoch, Alex; Poulton, Geoff; Price, Don; Prokopenko, Mikhail; Rees, David; Scott, Andrew; Seneviratne, Sarath; Valencia, Philip; Wang, Peter; Whitnall, Denis

    2008-01-01

    This report describes the first phase of the implementation of the Concept Demonstrator. The Concept Demonstrator system is a powerful and flexible experimental test-bed platform for developing sensors, communications systems, and multi-agent based algorithms for an intelligent vehicle health monitoring system for deployment in aerospace vehicles. The Concept Demonstrator contains sensors and processing hardware distributed throughout the structure, and uses multi-agent algorithms to characterize impacts and determine an appropriate response to these impacts.

  20. U.S. Aerospace and Aviation Industry: A State-By-State Analysis

    NASA Technical Reports Server (NTRS)

    2002-01-01

    President George W. Bush and the Congress created the Commission on the Future of the United States Aerospace Industry to evaluate the current and future health of the industry as well as the challenges that lie ahead for the U.S. workforce and the economy. To accomplish our mission, we commissioned a study on the economic impact of the aerospace industry nationally and on a state-by-state basis, using the best available U.S. government data. This study sought to define the core of the aerospace industry. The resulting data represents that very core those jobs specifically tied to commercial and civilian aerospace. U.S. Aerospace and Aviation: A State-by-State Analysis examines the civilian and commercial aerospace and aviation industry by employment, wages, payroll, and establishments. The report found that the U.S. civilian and commercial aerospace and aviation industry employed over 2 million workers in 2001.

  1. Smart Sensors' Role in Integrated System Health Management

    NASA Technical Reports Server (NTRS)

    Perotti, Jose M.; Mata, Carlos

    2005-01-01

    During the last decade, there has been a major effort in the aerospace industry to reduce the cost per pond of payload and become competitive in the international market. Competition from Europe, Japan, and China has reduced this cost to almost a third from 1990 to 2000. This cost has leveled in recent years to an average price of around $12,000/pound of payload. One of NASA's goals is to promote the development of technologies to reduce this cost by a factor of 10 or more Exploration of space, specially manned exploration missions, involves very complex launch and flight vehicles, associated ground support systems, and extensive human support during all phases of the mission. When considering the Space Shuttle Program, we can see that vehicle and ground support systems' processing, operation, and maintenance represent a large percentage of the program cost and time. Reducing operating, processing and maintenance costs will greatly reduce the cost of Exploration programs. The Integrated System Health Management (ISHM) concept is one of the technologies that will help reduce these operating, processing and maintenance costs. ISHM is an integrated health monitoring system applicable to both flight and ground systems. It automatically and autonomously acquires information from sensors and actuators and processes that information using the ISHM-embedded knowledge. As a result, it establishes the health of the system based on the acquired information and its prior knowledge. When this concept is fully implemented, ISHM systems shall be able to perform failure prediction and remediation before actual hard failures occurs, preventing its costly consequences. Data sources, sensors, and their associated data acquisition systems, constitute the foundation of the system. A smart sensing architecture is required to support the acquisition of reliable, high quality data, required by the ISHM. A thorough definition of the smart sensor architectures, their embedded diagnostic

  2. NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 19: Computer and information technology and aerospace knowledge diffusion

    NASA Technical Reports Server (NTRS)

    Pinelli, Thomas E.; Kennedy, John M.; Barclay, Rebecca O.; Bishop, Ann P.

    1992-01-01

    To remain a world leader in aerospace, the US must improve and maintain the professional competency of its engineers and scientists, increase the research and development (R&D) knowledge base, improve productivity, and maximize the integration of recent technological developments into the R&D process. How well these objectives are met, and at what cost, depends on a variety of factors, but largely on the ability of US aerospace engineers and scientists to acquire and process the results of federally funded R&D. The Federal Government's commitment to high speed computing and networking systems presupposes that computer and information technology will play a major role in the aerospace knowledge diffusion process. However, we know little about information technology needs, uses, and problems within the aerospace knowledge diffusion process. The use of computer and information technology by US aerospace engineers and scientists in academia, government, and industry is reported.

  3. Technical communications in aerospace - An analysis of the practices reported by U.S. and European aerospace engineers and scientists

    NASA Technical Reports Server (NTRS)

    Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.; Glassman, Myron

    1990-01-01

    The flow of scientific and technical information (STI) at the individual, organizational, national, and international levels is studied. The responses of U.S and European aerospace engineers and scientists to questionnaires concerning technical communications in aerospace are examined. Particular attention is given to the means used to communicate information and the social system of the aerospace knowledge diffusion process. Demographic data about the survey respondents are provided. The methods used to communicate technical data and the sources utilized to solve technical problems are described. The importance of technical writing skills and the use of computer technology in the aerospace field are discussed. The derived data are useful for R&D and information managers in order to improve access to and utilization of aerospace STI.

  4. Reliability-based econometrics of aerospace structural systems: Design criteria and test options. Ph.D. Thesis - Georgia Inst. of Tech.

    NASA Technical Reports Server (NTRS)

    Thomas, J. M.; Hanagud, S.

    1974-01-01

    The design criteria and test options for aerospace structural reliability were investigated. A decision methodology was developed for selecting a combination of structural tests and structural design factors. The decision method involves the use of Bayesian statistics and statistical decision theory. Procedures are discussed for obtaining and updating data-based probabilistic strength distributions for aerospace structures when test information is available and for obtaining subjective distributions when data are not available. The techniques used in developing the distributions are explained.

  5. Health governance: principal-agent linkages and health system strengthening.

    PubMed

    Brinkerhoff, Derick W; Bossert, Thomas J

    2014-09-01

    Governance is increasingly recognized as an important factor in health system performance, yet conceptually and practically it remains poorly understood and subject to often vague and competing notions of both what its role is and how to address its weaknesses. This overview article for the symposium on health governance presents a model of health governance that focuses on the multiplicity of societal actors in health systems, the distribution of roles and responsibilities among them and their ability and willingness to fulfil these roles and responsibilities. This focus highlights the principal-agent linkages among actors and the resulting incentives for good governance and health system performance. The discussion identifies three disconnects that constitute challenges for health system strengthening interventions that target improving governance: (1) the gap between the good governance agenda and existing capacities, (2) the discrepancy between formal and informal governance and (3) the inattention to sociopolitical power dynamics. The article summarizes the three country cases in the symposium and highlights their governance findings: health sector reform in China, financial management of health resources in Brazilian municipalities and budget reform in hospitals in Lesotho. The concluding sections clarify how the three cases apply the model's principal-agent linkages and highlight the importance of filling the gaps remaining between problem diagnosis and the development of practical guidance that supports 'best fit' solutions and accommodates political realities in health systems strengthening.

  6. Multiplexing Technology for Acoustic Emission Monitoring of Aerospace Vehicles

    NASA Technical Reports Server (NTRS)

    Prosser, William; Percy, Daniel

    2003-01-01

    The initiation and propagation of damage mechanisms such as cracks and delaminations generate acoustic waves, which propagate through a structure. These waves can be detected and analyzed to provide the location and severity of damage as part of a structural health monitoring (SHM) system. This methodology of damage detection is commonly known as acoustic emission (AE) monitoring, and is widely used on a variety of applications on civil structures. AE has been widely considered for SHM of aerospace vehicles. Numerous successful ground and flight test demonstrations have been performed, which show the viability of the technology for damage monitoring in aerospace structures. However, one significant current limitation for application of AE techniques on aerospace vehicles is the large size, mass, and power requirements for the necessary monitoring instrumentation. To address this issue, a prototype multiplexing approach has been developed and demonstrated in this study, which reduces the amount of AE monitoring instrumentation required. Typical time division multiplexing techniques that are commonly used to monitor strain, pressure and temperature sensors are not applicable to AE monitoring because of the asynchronous and widely varying rates of AE signal occurrence. Thus, an event based multiplexing technique was developed. In the initial prototype circuit, inputs from eight sensors in a linear array were multiplexed into two data acquisition channels. The multiplexer rapidly switches, in less than one microsecond, allowing the signals from two sensors to be acquired by a digitizer. The two acquired signals are from the sensors on either side of the trigger sensor. This enables the capture of the first arrival of the waves, which cannot be accomplished with the signal from the trigger sensor. The propagation delay to the slightly more distant neighboring sensors makes this possible. The arrival time from this first arrival provides a more accurate source location

  7. Energy Storage for Aerospace Applications

    NASA Technical Reports Server (NTRS)

    Perez-Davis, Marla E.; Loyselle, Patricia L.; Hoberecht, Mark A.; Manzo, Michelle A.; Kohout, Lisa L.; Burke, Kenneth A.; Cabrera, Carlos R.

    2001-01-01

    The NASA Glenn Research Center (GRC) has long been a major contributor to the development and application of energy storage technologies for NASAs missions and programs. NASA GRC has supported technology efforts for the advancement of batteries and fuel cells. The Electrochemistry Branch at NASA GRC continues to play a critical role in the development and application of energy storage technologies, in collaboration with other NASA centers, government agencies, industry and academia. This paper describes the work in batteries and fuel cell technologies at the NASA Glenn Research Center. It covers a number of systems required to ensure that NASAs needs for a wide variety of systems are met. Some of the topics covered are lithium-based batteries, proton exchange membrane (PEM) fuel cells, and nanotechnology activities. With the advances of the past years, we begin the 21st century with new technical challenges and opportunities as we develop enabling technologies for batteries and fuel cells for aerospace applications.

  8. ASAP Aerospace Safety Advisory Panel

    NASA Technical Reports Server (NTRS)

    2004-01-01

    This is the First Quarterly Report for the newly reconstituted Aerospace Safety Advisory Panel (ASAP). The NASA Administrator rechartered the Panel on November 18,2003, to provide an independent, vigilant, and long-term oversight of NASA's safety policies and programs well beyond Return to Flight of the Space Shuttle. The charter was revised to be consistent with the original intent of Congress in enacting the statute establishing ASAP in 1967 to focus on NASA's safety and quality systems, including industrial and systems safety, risk-management and trend analysis, and the management of these activities.The charter also was revised to provide more timely feedback to NASA by requiring quarterly rather than annual reports, and by requiring ASAP to perform special assessments with immediate feedback to NASA. ASAP was positioned to help institutionalize the safety culture of NASA in the post- Stafford-Covey Return to Flight environment.

  9. Advanced Engineering Environments: Implications for Aerospace Manufacturing

    NASA Technical Reports Server (NTRS)

    Thomas, D.

    2001-01-01

    There are significant challenges facing today's aerospace industry. Global competition, more complex products, geographically-distributed design teams, demands for lower cost, higher reliability and safer vehicles, and the need to incorporate the latest technologies quicker all face the developer of aerospace systems. New information technologies offer promising opportunities to develop advanced engineering environments (AEEs) to meet these challenges. Significant advances in the state-of-the-art of aerospace engineering practice are envisioned in the areas of engineering design and analytical tools, cost and risk tools, collaborative engineering, and high-fidelity simulations early in the development cycle. These advances will enable modeling and simulation of manufacturing methods, which will in turn allow manufacturing considerations to be included much earlier in the system development cycle. Significant cost savings, increased quality, and decreased manufacturing cycle time are expected to result. This paper will give an overview of the NASA's Intelligent Synthesis Environment, the agency initiative to develop an AEE, with a focus on the anticipated benefits in aerospace manufacturing.

  10. The German health care system and health care reform.

    PubMed

    Kamke, K

    1998-02-01

    This article presents a structured survey of the German health care and health insurance system, and analyzes major developments of current German health policy. The German statutory health insurance system has been known as a system that provides all citizens with ready access to comprehensive high quality medical care at a cost the country considered socially acceptable. However, an increasing concern for rapidly rising health care expenditure led to a number of cost-containment measures since 1977. The aim was to bring the growth of health care expenditure in line with the growth of wages and salaries of the sickness fund members. The recent health care reforms of 1989 and 1993 yielded only short-term reductions of health care expenditure, with increases in the subsequent years. 'Stability of the contribution rate' is the uppermost political objective of current health care reform initiatives. Options under discussion include reductions in the benefit package and increases of patients' co-payments. The article concludes with the possible consequences of the 1997 health care reform of which the major part became effective 1 July 1997.

  11. The Consumer Health Information System Adoption Model.

    PubMed

    Monkman, Helen; Kushniruk, Andre W

    2015-01-01

    Derived from overlapping concepts in consumer health, a consumer health information system refers to any of the broad range of applications, tools, and educational resources developed to empower consumers with knowledge, techniques, and strategies, to manage their own health. As consumer health information systems become increasingly popular, it is important to explore the factors that impact their adoption and success. Accumulating evidence indicates a relationship between usability and consumers' eHealth Literacy skills and the demands consumer HISs place on their skills. Here, we present a new model called the Consumer Health Information System Adoption Model, which depicts both consumer eHealth literacy skills and system demands on eHealth literacy as moderators with the potential to affect the strength of relationship between usefulness and usability (predictors of usage) and adoption, value, and successful use (actual usage outcomes). Strategies for aligning these two moderating factors are described.

  12. Health, Health Care, and Systems Science: Emerging Paradigm

    PubMed Central

    2017-01-01

    Health is a continuum of an optimized state of a biologic system, an outcome of positive relationships with the self and others. A healthy system follows the principles of systems science derived from observations of nature, highlighting the character of relationships as the key determinant. Relationships evolve from our decisions, which are consequential to the function of our own biologic system on all levels, including the genome, where epigenetics impact our morphology. In healthy systems, decisions emanate from the reciprocal collaboration of hippocampal memory and the executive prefrontal cortex. We can decide to change relationships through choices. What is selected, however, only represents the cognitive interpretation of our limited sensory perception; it strongly reflects inherent biases toward either optimizing state, making a biologic system healthy, or not. Health or its absence is then the outcome; there is no inconsequential choice. Public health effort should not focus on punitive steps (e.g. taxation of unhealthy products or behaviors) in order to achieve a higher level of public’s health. It should teach people the process of making healthy decisions; otherwise, people will just migrate/shift from one unhealthy product/behavior to another, and well-intended punitive steps will not make much difference. Physical activity, accompanied by nutrition and stress management, have the greatest impact on fashioning health and simultaneously are the most cost-effective measures. Moderate-to-vigorous exercise not only improves aerobic fitness but also positively influences cognition, including memory and senses. Collective, rational societal decisions can then be anticipated. Health care is a business system principally governed by self-maximizing decisions of its components; uneven and contradictory outcomes are the consequences within such a non-optimized system. Health is not health care. We are biologic systems subject to the laws of biology in spite

  13. National Aerospace Leadership Initiative - Phase 2

    DTIC Science & Technology

    2010-03-01

    Volvo Aerospace The CCAT-NCAL team worked closely with Volvo Aero to understand their machine tools to be modeled: • Phoenix VTL mill /turn system ...emerging Air Force systems . • Continued development effort for a Web-Enabled framework for an Advanced Decision Support Tool . This tool will...analysis tracking system was co-located in the WNEC Virtual Reality laboratory with DELMIA HUMAN V5 Human Analysis software. These tools were used in the

  14. Lay health workers and HIV programmes: implications for health systems.

    PubMed

    Schneider, H; Lehmann, U

    2010-01-01

    One of the consequences of massive investment in antiretroviral access and other AIDS programmes has been the rapid emergence of large numbers of lay workers in the health systems of developing countries. In South Africa, government estimates are 65,000, mostly HIV/TB care-related lay workers contribute their labour in the public health sector, outnumbering the main front-line primary health care providers and professional nurses. The phenomenon has grown organically and incrementally, playing a wide variety of care-giving, support and advocacy roles. Using South Africa as a case, this paper discusses the different forms, traditions and contradictory orientations taken by lay health work and the system-wide effects of a large lay worker presence. As pressures to regularise and formalize the status of lay health workers grow, important questions are raised as to their place in health systems, and more broadly what they represent as a new intermediary layer between state and citizen. It argues for a research agenda that seeks to better characterise types of lay involvement in the health system, particularly in an era of antiretroviral therapy, and which takes a wider perspective on the meanings of this recent re-emergence of an old concept in health systems heavily affected by HIV/AIDS.

  15. General Purpose Data-Driven Online System Health Monitoring with Applications to Space Operations

    NASA Technical Reports Server (NTRS)

    Iverson, David L.; Spirkovska, Lilly; Schwabacher, Mark

    2010-01-01

    Modern space transportation and ground support system designs are becoming increasingly sophisticated and complex. Determining the health state of these systems using traditional parameter limit checking, or model-based or rule-based methods is becoming more difficult as the number of sensors and component interactions grows. Data-driven monitoring techniques have been developed to address these issues by analyzing system operations data to automatically characterize normal system behavior. System health can be monitored by comparing real-time operating data with these nominal characterizations, providing detection of anomalous data signatures indicative of system faults, failures, or precursors of significant failures. The Inductive Monitoring System (IMS) is a general purpose, data-driven system health monitoring software tool that has been successfully applied to several aerospace applications and is under evaluation for anomaly detection in vehicle and ground equipment for next generation launch systems. After an introduction to IMS application development, we discuss these NASA online monitoring applications, including the integration of IMS with complementary model-based and rule-based methods. Although the examples presented in this paper are from space operations applications, IMS is a general-purpose health-monitoring tool that is also applicable to power generation and transmission system monitoring.

  16. Building health research systems to achieve better health.

    PubMed

    Hanney, Stephen R; González Block, Miguel A

    2006-11-06

    Health research systems can link knowledge generation with practical concerns to improve health and health equity. Interest in health research, and in how health research systems should best be organised, is moving up the agenda of bodies such as the World Health Organisation. Pioneering health research systems, for example those in Canada and the UK, show that progress is possible. However, radical steps are required to achieve this. Such steps should be based on evidence not anecdotes. Health Research Policy and Systems (HARPS) provides a vehicle for the publication of research, and informed opinion, on a range of topics related to the organisation of health research systems and the enormous benefits that can be achieved. Following the Mexico ministerial summit on health research, WHO has been identifying ways in which it could itself improve the use of research evidence. The results from this activity are soon to be published as a series of articles in HARPS. This editorial provides an account of some of these recent key developments in health research systems but places them in the context of a distinguished tradition of debate about the role of science in society. It also identifies some of the main issues on which 'research on health research' has already been conducted and published, in some cases in HARPS. Finding and retaining adequate financial and human resources to conduct health research is a major problem, especially in low and middle income countries where the need is often greatest. Research ethics and agenda-setting that responds to the demands of the public are issues of growing concern. Innovative and collaborative ways are being found to organise the conduct and utilisation of research so as to inform policy, and improve health and health equity. This is crucial, not least to achieve the health-related Millennium Development Goals. But much more progress is needed. The editorial ends by listing a wide range of topics related to the above

  17. [Perspectives of the Tunisian health system reform].

    PubMed

    Achouri, H

    2001-05-01

    Perspectives of development of the Tunisian health system are presented, in reference to the conceptual framework recommended by the World Health Organization, while a project of health insurance reform of the social security regimes is submitted to a dialogue with the different concerned parts. Recommended orientations articulate around five axes: 1. The promotion of care provision by improving the accessibility to services, notably in zones under served, by introducing new modes of dispensation, organization and management of care provision in the framework of a continuous quality assurance strategy. 2. The financing of health care, with the implementation of the health insurance reform, has to allow an improvement of the financial accessibility of the population to health care, while supervising the evolution of total health expenditures and by developing the system's management capacities. 3. Proposals relative to the mobilization of resources are advanced in areas of medicine, training of health professionals and research on the health system. 4. Adaptation of the health system governance to the new context is necessary and would have to be developed around evolving standards for the health system, on evaluation of its performances and on information and communication with its users. 5. The health system responsiveness, new motion whose contours are again blurred, would have to be analysed and adapted to the specific context of the country.

  18. Primary health care and public health: foundations of universal health systems.

    PubMed

    White, Franklin

    2015-01-01

    The aim of this review is to advocate for more integrated and universally accessible health systems, built on a foundation of primary health care and public health. The perspective outlined identified health systems as the frame of reference, clarified terminology and examined complementary perspectives on health. It explored the prospects for universal and integrated health systems from a global perspective, the role of healthy public policy in achieving population health and the value of the social-ecological model in guiding how best to align the components of an integrated health service. The importance of an ethical private sector in partnership with the public sector is recognized. Most health systems around the world, still heavily focused on illness, are doing relatively little to optimize health and minimize illness burdens, especially for vulnerable groups. This failure to improve the underlying conditions for health is compounded by insufficient allocation of resources to address priority needs with equity (universality, accessibility and affordability). Finally, public health and primary health care are the cornerstones of sustainable health systems, and this should be reflected in the health policies and professional education systems of all nations wishing to achieve a health system that is effective, equitable, efficient and affordable.

  19. Conceptual design for aerospace vehicles

    NASA Technical Reports Server (NTRS)

    Gratzer, Louis B.

    1989-01-01

    The designers of aircraft and more recently, aerospace vehicles have always struggled with the problems of evolving their designs to produce a machine which would perform its assigned task(s) in some optimum fashion. Almost invariably this involved dealing with more variables and constraints than could be handled in any computationally feasible way. With the advent of the electronic digital computer, the possibilities for introducing more variable and constraints into the initial design process led to greater expectations for improvement in vehicle (system) efficiency. The creation of the large scale systems necessary to achieve optimum designs has, for many reason, proved to be difficult. From a technical standpoint, significant problems arise in the development of satisfactory algorithms for processing of data from the various technical disciplines in a way that would be compatible with the complex optimization function. Also, the creation of effective optimization routines for multi-variable and constraint situations which could lead to consistent results has lagged. The current capability for carrying out the conceptual design of an aircraft on an interdisciplinary bases was evaluated to determine the need for extending this capability, and if necessary, to recommend means by which this could be carried out. Based on a review of available documentation and individual consultations, it appears that there is extensive interest at Langley Research Center as well as in the aerospace community in providing a higher level of capability that meets the technical challenges. By implication, the current design capability is inadequate and it does not operate in a way that allows the various technical disciplines to participate and cooperately interact in the design process. Based on this assessment, it was concluded that substantial effort should be devoted to developing a computer-based conceptual design system that would provide the capability needed for the near

  20. Health information systems: the foundations of public health.

    PubMed Central

    AbouZahr, Carla; Boerma, Ties

    2005-01-01

    Public health decision-making is critically dependent on the timely availability of sound data. The role of health information systems is to generate, analyse and disseminate such data. In practice, health information systems rarely function systematically. The products of historical, social and economic forces, they are complex, fragmented and unresponsive to needs. International donors in health are largely responsible for the problem, having prioritized urgent needs for data over longer-term country capacity-building. The result is painfully apparent in the inability of most countries to generate the data needed to monitor progress towards the Millennium Development Goals. Solutions to the problem must be comprehensive; money alone is likely to be insufficient unless accompanied by sustained support to country systems development coupled with greater donor accountability and allocation of responsibilities. The Health Metrics Network, a global collaboration in the making, is intended to help bring such solutions to the countries most in need. PMID:16184276

  1. Food Systems and Public Health Disparities

    PubMed Central

    Neff, Roni A.; Palmer, Anne M.; Mckenzie, Shawn E.; Lawrence, Robert S.

    2009-01-01

    The United States has set a national goal to eliminate health disparities. This article emphasizes the importance of food systems in generating and exacerbating health disparities in the United States and suggests avenues for reducing them. It presents a conceptual model showing how broad food system conditions interplay with community food environments—and how these relationships are filtered and refracted through prisms of social disparities to generate and exacerbate health disparities. Interactions with demand factors in the social environment are described. The article also highlights the separate food systems pathway to health disparities via environmental and occupational health effects of agriculture. PMID:23173027

  2. Systems Science Methods in Public Health

    PubMed Central

    Luke, Douglas A.; Stamatakis, Katherine A.

    2012-01-01

    Complex systems abound in public health. Complex systems are made up of heterogeneous elements that interact with one another, have emergent properties that are not explained by understanding the individual elements of the system, persist over time and adapt to changing circumstances. Public health is starting to use results from systems science studies to shape practice and policy, for example in preparing for global pandemics. However, systems science study designs and analytic methods remain underutilized and are not widely featured in public health curricula or training. In this review we present an argument for the utility of systems science methods in public health, introduce three important systems science methods (system dynamics, network analysis, and agent-based modeling), and provide three case studies where these methods have been used to answer important public health science questions in the areas of infectious disease, tobacco control, and obesity. PMID:22224885

  3. Automated design of aerospace structures

    NASA Technical Reports Server (NTRS)

    Fulton, R. E.; Mccomb, H. G.

    1974-01-01

    The current state-of-the-art in structural analysis of aerospace vehicles is characterized, automated design technology is discussed, and an indication is given of the future direction of research in analysis and automated design. Representative computer programs for analysis typical of those in routine use in vehicle design activities are described, and results are shown for some selected analysis problems. Recent and planned advances in analysis capability are indicated. Techniques used to automate the more routine aspects of structural design are discussed, and some recently developed automated design computer programs are described. Finally, discussion is presented of early accomplishments in interdisciplinary automated design systems, and some indication of the future thrust of research in this field is given.

  4. Excellence within the Navy Health Care System.

    DTIC Science & Technology

    1984-12-01

    RD-RI54 682 EXCELLENCE WiTHIN THE NAVY HEALTH CARE SYSTEM (U) NAVAL I. POSTGRADUATE SCHOOL MONTEREY CA J A NORTON DEC 84 UNCLRSSIFIED F/G 6/12...STANDAROS-1963-A -J% * .NAVAL POSTGRADUATE SCHOOL Monterey, California DTIC THESIS EXCELLENCE WITHIN THE NAVY HEALTH CARE SYSTEM by JAMES ALFRED NORTON...Within the Navy Health Care December 1984 System S. PERFORMING ORG. REPORT NUMBER 7. AUTHOR(s) I. CONTRACT OR GRANT NUMBER(@) James Alfred Norton S

  5. A review of multifunctional structure technology for aerospace applications

    NASA Astrophysics Data System (ADS)

    Sairajan, K. K.; Aglietti, G. S.; Mani, K. M.

    2016-03-01

    The emerging field of multifunctional structure (MFS) technologies enables the design of systems with reduced mass and volume, thereby improving their overall efficiency. It requires developments in different engineering disciplines and their integration into a single system without degrading their individual performances. MFS is particularly suitable for aerospace applications where mass and volume are critical to the cost of the mission. This article reviews the current state of the art of multifunctional structure technologies relevant to aerospace applications.

  6. Capacitance-based damage detection sensing for aerospace structural composites

    NASA Astrophysics Data System (ADS)

    Bahrami, P.; Yamamoto, N.; Chen, Y.; Manohara, H.

    2014-04-01

    Damage detection technology needs improvement for aerospace engineering application because detection within complex composite structures is difficult yet critical to avoid catastrophic failure. Damage detection is challenging in aerospace structures because not all the damage detection technology can cover the various defect types (delamination, fiber fracture, matrix crack etc.), or conditions (visibility, crack length size, etc.). These defect states are expected to become even more complex with future introduction of novel composites including nano-/microparticle reinforcement. Currently, non-destructive evaluation (NDE) methods with X-ray, ultrasound, or eddy current have good resolutions (< 0.1 mm), but their detection capabilities is limited by defect locations and orientations and require massive inspection devices. System health monitoring (SHM) methods are often paired with NDE technologies to signal out sensed damage, but their data collection and analysis currently requires excessive wiring and complex signal analysis. Here, we present a capacitance sensor-based, structural defect detection technology with improved sensing capability. Thin dielectric polymer layer is integrated as part of the structure; the defect in the structure directly alters the sensing layer's capacitance, allowing full-coverage sensing capability independent of defect size, orientation or location. In this work, capacitance-based sensing capability was experimentally demonstrated with a 2D sensing layer consisting of a dielectric layer sandwiched by electrodes. These sensing layers were applied on substrate surfaces. Surface indentation damage (~1mm diameter) and its location were detected through measured capacitance changes: 1 to 250 % depending on the substrates. The damage detection sensors are light weight, and they can be conformably coated and can be part of the composite structure. Therefore it is suitable for aerospace structures such as cryogenic tanks and rocket

  7. Limitless Horizons. Careers in Aerospace

    NASA Technical Reports Server (NTRS)

    Lewis, M. H.

    1980-01-01

    A manual is presented for use by counselors in career guidance programs. Pertinent information is provided on choices open in aerospace sciences, engineering, and technology. Accredited institutions awarding degrees in pertinent areas are listed as well as additional sources of aerospace career information. NASA's role and fields of interest are emphasized.

  8. Aerospace Activities and Language Development

    ERIC Educational Resources Information Center

    Jones, Robert M.; Piper, Martha

    1975-01-01

    Describes how science activities can be used to stimulate language development in the elementary grades. Two aerospace activities are described involving liquid nitrogen and the launching of a weather balloon which integrate aerospace interests into the development of language skills. (BR)

  9. Limitless Horizons: Careers in Aerospace.

    ERIC Educational Resources Information Center

    Lewis, Mary H.

    This is a manual for acquainting students with pertinent information relating to career choices in aerospace science, engineering, and technology. The first chapter presents information about the aerospace industry by describing disciplines typical of this industry. The National Aeronautics and Space Administration's (NASA) classification system…

  10. Health research systems: promoting health equity or economic competitiveness?

    PubMed Central

    Loff, Bebe

    2012-01-01

    Abstract International collaborative health research is justifiably expected to help reduce global health inequities. Investment in health policy and systems research in developing countries is essential to this process but, currently, funding for international research is mainly channelled towards the development of new medical interventions. This imbalance is largely due to research legislation and policies used in high-income countries. These policies have increasingly led these countries to invest in health research aimed at boosting national economic competitiveness rather than reducing health inequities. In the United States of America and the United Kingdom of Great Britain and Northern Ireland, the regulation of research has encouraged a model that: leads to products that can be commercialized; targets health needs that can be met by profitable, high-technology products; has the licensing of new products as its endpoint; and does not entail significant research capacity strengthening in other countries. Accordingly, investment in international research is directed towards pharmaceutical trials and product development public–private partnerships for neglected diseases. This diverts funding away from research that is needed to implement existing interventions and to strengthen health systems, i.e. health policy and systems research. Governments must restructure their research laws and policies to increase this essential research in developing countries. PMID:22271965

  11. Chinese health care system and clinical epidemiology

    PubMed Central

    Sun, Yuelian; Gregersen, Hans; Yuan, Wei

    2017-01-01

    China has gone through a comprehensive health care insurance reform since 2003 and achieved universal health insurance coverage in 2011. The new health care insurance system provides China with a huge opportunity for the development of health care and medical research when its rich medical resources are fully unfolded. In this study, we review the Chinese health care system and its implication for medical research, especially within clinical epidemiology. First, we briefly review the population register system, the distribution of the urban and rural population in China, and the development of the Chinese health care system after 1949. In the following sections, we describe the current Chinese health care delivery system and the current health insurance system. We then focus on the construction of the Chinese health information system as well as several existing registers and research projects on health data. Finally, we discuss the opportunities and challenges of the health care system in regard to clinical epidemiology research. China now has three main insurance schemes. The Urban Employee Basic Medical Insurance (UEBMI) covers urban employees and retired employees. The Urban Residence Basic Medical Insurance (URBMI) covers urban residents, including children, students, elderly people without previous employment, and unemployed people. The New Rural Cooperative Medical Scheme (NRCMS) covers rural residents. The Chinese Government has made efforts to build up health information data, including electronic medical records. The establishment of universal health care insurance with linkage to medical records will provide potentially huge research opportunities in the future. However, constructing a complete register system at a nationwide level is challenging. In the future, China will demand increased capacity of researchers and data managers, in particular within clinical epidemiology, to explore the rich resources. PMID:28356772

  12. Chinese health care system and clinical epidemiology.

    PubMed

    Sun, Yuelian; Gregersen, Hans; Yuan, Wei

    2017-01-01

    China has gone through a comprehensive health care insurance reform since 2003 and achieved universal health insurance coverage in 2011. The new health care insurance system provides China with a huge opportunity for the development of health care and medical research when its rich medical resources are fully unfolded. In this study, we review the Chinese health care system and its implication for medical research, especially within clinical epidemiology. First, we briefly review the population register system, the distribution of the urban and rural population in China, and the development of the Chinese health care system after 1949. In the following sections, we describe the current Chinese health care delivery system and the current health insurance system. We then focus on the construction of the Chinese health information system as well as several existing registers and research projects on health data. Finally, we discuss the opportunities and challenges of the health care system in regard to clinical epidemiology research. China now has three main insurance schemes. The Urban Employee Basic Medical Insurance (UEBMI) covers urban employees and retired employees. The Urban Residence Basic Medical Insurance (URBMI) covers urban residents, including children, students, elderly people without previous employment, and unemployed people. The New Rural Cooperative Medical Scheme (NRCMS) covers rural residents. The Chinese Government has made efforts to build up health information data, including electronic medical records. The establishment of universal health care insurance with linkage to medical records will provide potentially huge research opportunities in the future. However, constructing a complete register system at a nationwide level is challenging. In the future, China will demand increased capacity of researchers and data managers, in particular within clinical epidemiology, to explore the rich resources.

  13. Aerospace applications of nickel-cadmium batteries

    SciTech Connect

    Habib, S. )

    1993-05-01

    Some recent NASA applications of Ni-Cd batteries are Magellan, Topex/Poseidon, and the Tracking and Data Relay Satellite. Each of these automated spacecraft has a design lifetime of at least 3 years. Characteristics of the battery systems for each of these applications are given. Other topics discussed include the NASA standard Ni-Cd battery, the aerospace flight battery systems program, and the impact of the pending OHSA ruling.

  14. Reforming the health care system: implications for health care marketers.

    PubMed

    Petrochuk, M A; Javalgi, R G

    1996-01-01

    Health care reform has become the dominant domestic policy issue in the United States. President Clinton, and the Democratic leaders in the House and Senate have all proposed legislation to reform the system. Regardless of the plan which is ultimately enacted, health care delivery will be radically changed. Health care marketers, given their perspective, have a unique opportunity to ensure their own institutions' success. Organizational, managerial, and marketing strategies can be employed to deal with the changes which will occur. Marketers can utilize personal strategies to remain proactive and successful during an era of health care reform. As outlined in this article, responding to the health care reform changes requires strategic urgency and action. However, the strategies proposed are practical regardless of the version of health care reform legislation which is ultimately enacted.

  15. [Health for All-Italia: an indicator system on health].

    PubMed

    Burgio, Alessandra; Crialesi, Roberta; Loghi, Marzia

    2003-01-01

    The Health for All - Italia information system collects health data from several sources. It is intended to be a cornerstone for the achievement of an overview about health in Italy. Health is analyzed at different levels, ranging from health services, health needs, lifestyles, demographic, social, economic and environmental contexts. The database associated software allows to pin down statistical data into graphs and tables, and to carry out simple statistical analysis. It is therefore possible to view the indicators' time series, make simple projections and compare the various indicators over the years for each territorial unit. This is possible by means of tables, graphs (histograms, line graphs, frequencies, linear regression with calculation of correlation coefficients, etc) and maps. These charts can be exported to other programs (i.e. Word, Excel, Power Point), or they can be directly printed in color or black and white.

  16. Veneto Region, Italy. Health system review.

    PubMed

    Toniolo, Franco; Mantoan, Domenico; Maresso, Anna

    2012-01-01

    The Health Systems in Transition (HiT) profiles are country-based reports that provide a detailed description of a health system and of policy initiatives in progress or under development. This HiT is one of the first to be written on a subnational level of government and focuses on the Veneto Region of northern Italy. HiTs examine different approaches to the organization, financing and delivery of health services and the role of the main actors in health systems; describe the institutional framework, process, content and implementation of health and health care policies; and highlight challenges and areas that require more in-depth analysis. The Veneto Region is one of Italy's richest regions and the health of its resident population compares favourably with other regions in Italy. Life expectancy for both men and women, now at 79.1 and 85.2 years, respectively, is slightly higher than the national average, while mortality rates are comparable to national ones. The major causes of death are tumours and cardiovascular diseases. Under Italy's National Health Service, the organization and provision of health care is a regional responsibility and regions must provide a nationally defined (with regional input) basic health benefit package to all of their citizens; extra services may be provided if budgets allow. Health care is mainly financed by earmarked central and regional taxes, with regions receiving their allocated share of resources from the National Health Fund. Historically, health budget deficits have been a major problem in most Italian regions, but since the early 2000s the introduction of efficiency measures and tighter procedures on financial management have contributed to a significant decrease in the Veneto Regions health budget deficit.The health system is governed by the Veneto Region government (Giunta) via the Departments of Health and Social Services, which receive technical support from a single General Management Secretariat. Health care is

  17. Hybrid Solid Oxide Fuel Cell/Gas Turbine System Design for High Altitude Long Endurance Aerospace Missions

    NASA Technical Reports Server (NTRS)

    Himansu, Ananda; Freeh, Joshua E.; Steffen, Christopher J., Jr.; Tornabene, Robert T.; Wang, Xiao-Yen J.

    2006-01-01

    A system level analysis, inclusive of mass, is carried out for a cryogenic hydrogen fueled hybrid solid oxide fuel cell and bottoming gas turbine (SOFC/GT) power system. The system is designed to provide primary or secondary electrical power for an unmanned aerial vehicle (UAV) over a high altitude, long endurance mission. The net power level and altitude are parametrically varied to examine their effect on total system mass. Some of the more important technology parameters, including turbomachinery efficiencies and the SOFC area specific resistance, are also studied for their effect on total system mass. Finally, two different solid oxide cell designs are compared to show the importance of the individual solid oxide cell design on the overall system. We show that for long mission durations of 10 days or more, the fuel mass savings resulting from the high efficiency of a SOFC/GT system more than offset the larger powerplant mass resulting from the low specific power of the SOFC/GT system. These missions therefore favor high efficiency, low power density systems, characteristics typical of fuel cell systems in general.

  18. Mental Health Systems in Scandinavia.

    ERIC Educational Resources Information Center

    Vail, David J.

    The guidebook is introduced by general observations on the Scandinavian countries concerning history, social policy, medicine, mental health, and psychiatric diagnosis. Discussed individually for Norway, Sweden, and Denmark are the following areas: mental health programs and statistics; mental illness programs, regional, hospital, aftercare,…

  19. Health Manpower Information System (HMIS)

    DTIC Science & Technology

    1986-03-10

    Pathology/Diagnosis 3107 Oral Maxillofacial Surgery 3108 Orthodontics 3109 Pedodontics 3110 Periodontics 3111 Public Health Dentistry 3112 Prosthodontics...Maxillofacial Surgery 3108 Orthodontics 3109 Pedodontics 3110 Periodontics 3111 Public Health Dentistry 3112 Prosthodontics 3113 Comprehensive...Executive Dentistry 3103 Endodontics 3102 Oral Pathology/Diagnosis 3107 Oral Maxillofacial Surgery 3108 Orthodontics 3109 Pedodontics 3110 Periodontics 3111

  20. Aerospace Nickel-cadmium Cell Verification

    NASA Technical Reports Server (NTRS)

    Manzo, Michelle A.; Strawn, D. Michael; Hall, Stephen W.

    2001-01-01

    During the early years of satellites, NASA successfully flew "NASA-Standard" nickel-cadmium (Ni-Cd) cells manufactured by GE/Gates/SAFF on a variety of spacecraft. In 1992 a NASA Battery Review Board determined that the strategy of a NASA Standard Cell and Battery Specification and the accompanying NASA control of a standard manufacturing control document (MCD) for Ni-Cd cells and batteries was unwarranted. As a result of that determination, standards were abandoned and the use of cells other than the NASA Standard was required. In order to gain insight into the performance and characteristics of the various aerospace Ni-Cd products available, tasks were initiated within the NASA Aerospace Flight Battery Systems Program that involved the procurement and testing of representative aerospace Ni-Cd cell designs. A standard set of test conditions was established in order to provide similar information about the products from various vendors. The objective of this testing was to provide independent verification of representative commercial flight cells available in the marketplace today. This paper will provide a summary of the verification tests run on cells from various manufacturers: Sanyo 35 Ampere-hour (Ali) standard and 35 Ali advanced Ni-Cd cells, SAFr 50 Ah Ni-Cd cells and Eagle-Picher 21 Ali Magnum and 21 Ali Super Ni-CdTM cells from Eagle-Picher were put through a full evaluation. A limited number of 18 and 55 Ali cells from Acme Electric were also tested to provide an initial evaluation of the Acme aerospace cell designs. Additionally, 35 Ali aerospace design Ni-MH cells from Sanyo were evaluated under the standard conditions established for this program. Ile test program is essentially complete. The cell design parameters, the verification test plan and the details of the test result will be discussed.