Science.gov

Sample records for afdu shakedown operations

  1. Liquid phase Fischer-Tropsch (II) demonstration in the Laporte Alternative Fuels Development Unit. Final topical report. Volume 7, Appendix. Task 1, Engineering modifications (Fischer-Tropsch II demonstration) and Task 2, AFDU shakedown, operations, deactivation and disposal (Fischer-Tropsch II demonstration)

    SciTech Connect

    Bhatt, B.L.

    1995-09-01

    This report presents results from a demonstration of Liquid Phase Fischer-Tropsch (LPFT) technology in DOE`s Alternative Fuels Development Unit (AFDU) at LaPorte, Texas. The run was conducted in a bubble column at the AFDU in May--June 1994. The 10-day run demonstrated a very high level of reactor productivity for LPFT, more than five times the previously demonstrated productivity (1). The productivity was constrained by mass transfer limitations, perhaps due to slurry thickening as a result of carbon formation on the catalyst. With a cobalt catalyst or an improved iron catalyst, if the carbon formation can be avoided, there is significant room for further improvements. This volume contains appendices for: reactor temperature stability; Mott Cross-flow filter test for F-T II; Fischer-Tropsch II run authorizations; Fischer-Tropsch II run chronology; liquid compositions; and F-T II / IIA Demonstration Mass Balances.

  2. LIQUID PHASE FISCHER-TROPSCH (III & IV) DEMONSTRATION IN THE LAPORTE ALTERNATIVE FUELS DEVELOPMENT UNIT. Final Topical Report. Volume I/II: Main Report. Task 1: Engineering Modifications (Fischer-Tropsch III & IV Demonstration) and Task 2: AFDU Shakedown, Operations, Deactivation (Shut-Down) and Disposal (Fischer-Tropsch III & IV Demonstration).

    SciTech Connect

    Bharat L. Bhatt

    1999-06-01

    Slurry phase Fischer-Tropsch technology was successfully demonstrated in DOE's Alternative Fuels Development Unit (AFDU) at LaPorte, Texas. Earlier work at LaPorte, with iron catalysts in 1992 and 1994, had established proof-of-concept status for the slurry phase process. The third campaign (Fischer-Tropsch III), in 1996, aimed at aggressively extending the operability of the slurry reactor using a proprietary cobalt catalyst. Due to an irreversible plugging of catalyst-wax separation filters as a result of unexpected catalyst fines generation, the operations had to be terminated after seven days on-stream. Following an extensive post-run investigation by the participants, the campaign was successfully completed in March-April 1998, with an improved proprietary cobalt catalyst. These runs were sponsored by the U. S. Department of Energy (DOE), Air Products & Chemicals, Inc., and Shell Synthetic Fuels, Inc. (SSFI). A productivity of approximately 140 grams (gm) of hydrocarbons (HC)/ hour (hr)-liter (lit) of expanded slurry volume was achieved at reasonable system stability during the second trial (Fischer-Tropsch IV). The productivity ranged from 110-140 at various conditions during the 18 days of operations. The catalyst/wax filters performed well throughout the demonstration, producing a clean wax product. For the most part, only one of the four filter housings was needed for catalyst/wax filtration. The filter flux appeared to exceed the design flux. A combination of use of a stronger catalyst and some innovative filtration techniques were responsible for this success. There was no sign of catalyst particle attrition and very little erosion of the slurry pump was observed, in contrast to the Fischer-Tropsch III operations. The reactor operated hydrodynamically stable with uniform temperature profile and gas hold-ups. Nuclear density and differential pressure measurements indicated somewhat higher than expected gas hold-up (45 - 50 vol%) during Fischer-Tropsch IV

  3. Shakedown operation of group of units for aromatic hydrocarbon production at the Novopolotsk petroleum refinery

    SciTech Connect

    Rudkovskii, A.D.; Chesnovitskii, K.G.; Koroleva, M.I.; Sulimov, A.D.; Teteruk, V.G.

    1983-03-01

    This article describes how technical xylene and C/sub 9/ aromatic hydrocarbons are produced in catalytic reformers operated in conjunction with diethylene glycol extraction units. In the operation of the unit, the greatest difficulties were encountered in purification of the p-xylene, owing to frequent mechanical failures of the equipment of the pulsed columns due to hydraulic shock and unstable operation under the process conditions required to obtain a product with a purity above 99%. As a result of the successful shakedown operations of individual aromatic hydrocarbons, the yields of commercial products (ethylbenzene, p-xylene, o-xylene, pseudocumene) have amounted to 76.9% of the technical xylene feed.

  4. The shakedown.

    PubMed

    Bodrock, Phil

    2005-03-01

    Customer Strategy Solutions, a California-based developer of order-fulfillment systems, is facing a shakedown. Six months after the firm's CEO, Pavlo Zhuk, set up a software development center in Kiev, local bureaucrats say the company hasn't filed all the tax schedules it should have. Moreover, Ukrainian tax officials claim that the company owes the government tax arrears. Zhuk is shocked; he and his colleagues have done everything by the book. This isn't the first time Zhuk has encountered trouble in Ukraine. In the process of getting the development center up and running, a state-owned telecommunications utility had made it difficult for Zhuk to get the phone lines his company needed. Senior telecom manager Vasyl Feodorovych Mylofienko had told Zhuk it would take three years to install the lines in his office-but for a certain price, Mylofienko had added, the lines could be functioning the following week. Even as the picture of rampant bribery and corruption in Ukraine becomes clear, Zhuk still doesn't want to pull out of the country. Of Ukrainian descent, he has dreams of helping to modernize the country. By paying his programmers more than they could make at any local company, he hopes to raise their standard of living so they can afford three meals a day without having to barter, stand in queues for hours, or moonlight. And yet, he isn't sure he can keep compromising his principles for the sake of the greater good. Should Customer Strategy Solutions pay off the Ukrainian tax officials? Commenting on this fictional case study are Alan L. Boeckmann, the chairman and CEO of Fluor Corporation; Rafael Di Tella, a professor at Harvard Business School; Thomas W. Dunfee, the Kolodny Professor of Social Responsibility and a professor of legal studies at Wharton; and Bozidar Djelic, the former finance and economy minister of Serbia. PMID:15768674

  5. The shakedown.

    PubMed

    Bodrock, Phil

    2005-03-01

    Customer Strategy Solutions, a California-based developer of order-fulfillment systems, is facing a shakedown. Six months after the firm's CEO, Pavlo Zhuk, set up a software development center in Kiev, local bureaucrats say the company hasn't filed all the tax schedules it should have. Moreover, Ukrainian tax officials claim that the company owes the government tax arrears. Zhuk is shocked; he and his colleagues have done everything by the book. This isn't the first time Zhuk has encountered trouble in Ukraine. In the process of getting the development center up and running, a state-owned telecommunications utility had made it difficult for Zhuk to get the phone lines his company needed. Senior telecom manager Vasyl Feodorovych Mylofienko had told Zhuk it would take three years to install the lines in his office-but for a certain price, Mylofienko had added, the lines could be functioning the following week. Even as the picture of rampant bribery and corruption in Ukraine becomes clear, Zhuk still doesn't want to pull out of the country. Of Ukrainian descent, he has dreams of helping to modernize the country. By paying his programmers more than they could make at any local company, he hopes to raise their standard of living so they can afford three meals a day without having to barter, stand in queues for hours, or moonlight. And yet, he isn't sure he can keep compromising his principles for the sake of the greater good. Should Customer Strategy Solutions pay off the Ukrainian tax officials? Commenting on this fictional case study are Alan L. Boeckmann, the chairman and CEO of Fluor Corporation; Rafael Di Tella, a professor at Harvard Business School; Thomas W. Dunfee, the Kolodny Professor of Social Responsibility and a professor of legal studies at Wharton; and Bozidar Djelic, the former finance and economy minister of Serbia.

  6. Initial Operation and Shakedown of the Nuclear Thermal Rocket Element Environmental Simulator (NTREES)

    NASA Technical Reports Server (NTRS)

    Emrich, William J., Jr.

    2014-01-01

    To support the on-going nuclear thermal propulsion effort, a state-of-the-art non nuclear experimental test setup has been constructed to evaluate the performance characteristics of candidate fuel element materials and geometries in representative environments. The facility to perform this testing is referred to as the Nuclear Thermal Rocket Element Environment Simulator (NTREES). This device can simulate the environmental conditions (minus the radiation) to which nuclear rocket fuel components will be subjected during reactor operation. Prototypical fuel elements mounted in the simulator are inductively heated in such a manner so as to accurately reproduce the temperatures and heat fluxes which would normally occur as a result of nuclear fission in addition to being exposed to flowing hydrogen. Recent upgrades to NTREES now allow power levels 24 times greater than those achievable in the previous facility configuration. This higher power operation will allow near prototypical power densities and flows to finally be achieved in most prototypical fuel elements.

  7. Columbia's first shakedown flight

    NASA Astrophysics Data System (ADS)

    Bell, Peter M.

    The space shuttle orbiter Columbia, first of the planned fleet of spacecraft in the nation's space transportation system, will liftoff on its first orbital shakedown flight on or about the 10th of April 1981. Launch will be from the NASA Kennedy Space Center Launch Complex 39A, no earlier than 45 minutes after sunrise. Crew for the first orbital flight will be John W. Young, commander, veteran of two Gemini and two Apollo space flights, and U.S. Navy Capt. Robert L. Crippen, pilot. Crippen has not flown in space.

  8. General analytical shakedown solution for structures with kinematic hardening materials

    NASA Astrophysics Data System (ADS)

    Guo, Baofeng; Zou, Zongyuan; Jin, Miao

    2016-04-01

    The effect of kinematic hardening behavior on the shakedown behaviors of structure has been investigated by performing shakedown analysis for some specific problems. The results obtained only show that the shakedown limit loads of structures with kinematic hardening model are larger than or equal to those with perfectly plastic model of the same initial yield stress. To further investigate the rules governing the different shakedown behaviors of kinematic hardening structures, the extended shakedown theorem for limited kinematic hardening is applied, the shakedown condition is then proposed, and a general analytical solution for the structural shakedown limit load is thus derived. The analytical shakedown limit loads for fully reversed cyclic loading and non-fully reversed cyclic loading are then given based on the general solution. The resulting analytical solution is applied to some specific problems: a hollow specimen subjected to tension and torsion, a flanged pipe subjected to pressure and axial force and a square plate with small central hole subjected to biaxial tension. The results obtained are compared with those in literatures, they are consistent with each other. Based on the resulting general analytical solution, rules governing the general effects of kinematic hardening behavior on the shakedown behavior of structure are clearly.

  9. Application Of Shakedown Analysis To Cyclic Creep Damage Limits

    SciTech Connect

    Carter, Peter; Jetter, Robert I; Sham, Sam

    2012-01-01

    Shakedown analysis may be used to provide a conservative estimate of local rupture and hence cyclic creep damage for use in a creep-fatigue assessment. The shakedown analysis is based on an elastic-perfectly plastic material with a temperature-dependent pseudo yield stress defined to guarantee that a shakedown solution exists which does not exceed rupture stress and temperature for a defined life. The ratio of design life to the estimated maximum cyclic life is the shakedown creep damage. The methodology does not require stress classification and is also applicable to cycles over the full range of temperature above and below the creep regime. Full cyclic creep and damage analysis is the alternative when shakedown analysis appears to be excessively conservative.

  10. Shakedown analysis of thick cylinders with multiple radial openings

    NASA Astrophysics Data System (ADS)

    Singh, A. K.; Khan, I. A.; Sharma, K.; Sen, R. N.; Vyas, K. N.

    2016-09-01

    Shakedown and ratcheting behaviour of thick cylinder with multiple radial crossholes is investigated in this paper by inelastic finite element analysis. Effect of opening radius (ri/Ri), thickness of the vessel i.e. thickness ratios (R0/Ri) and availability of ligament between two openings (L/1) is studied. In order to normalise the applied pressure, limit load for thick cylindrical vessel without any opening was considered and it was found to be highly conservative. Later, interaction diagram normalised with respect to the limit load for thick cylinder taking into account the effects of opening was plotted. In order to distinguish between plastic shakedown and ratcheting, thickness advantage is taken into consideration. A more practical assessment technique is also discussed where the maximum range of thermal stress is computed through finite element analysis and the results were found to be in accordance with the Bree diagram. However the elastic-plastic shakedown boundary was found to be affected significantly with the incorporation of discontinuities and with changes in the parameters.

  11. Strategies for Maximizing Successful Drug Substance Technology Transfer Using Engineering, Shake-Down, and Wet Test Runs.

    PubMed

    Abraham, Sushil; Bain, David; Bowers, John; Larivee, Victor; Leira, Francisco; Xie, Jasmina

    2015-01-01

    The technology transfer of biological products is a complex process requiring control of multiple unit operations and parameters to ensure product quality and process performance. To achieve product commercialization, the technology transfer sending unit must successfully transfer knowledge about both the product and the process to the receiving unit. A key strategy for maximizing successful scale-up and transfer efforts is the effective use of engineering and shake-down runs to confirm operational performance and product quality prior to embarking on good manufacturing practice runs such as process performance qualification runs. We consider key factors to consider in making the decision to perform shake-down or engineering runs. We also present industry benchmarking results of how engineering runs are used in drug substance technology transfers alongside the main themes and best practices that have emerged. Our goal is to provide companies with a framework for ensuring the "right first time" technology transfers with effective deployment of resources within increasingly aggressive timeline constraints.

  12. Strategies for Maximizing Successful Drug Substance Technology Transfer Using Engineering, Shake-Down, and Wet Test Runs.

    PubMed

    Abraham, Sushil; Bain, David; Bowers, John; Larivee, Victor; Leira, Francisco; Xie, Jasmina

    2015-01-01

    The technology transfer of biological products is a complex process requiring control of multiple unit operations and parameters to ensure product quality and process performance. To achieve product commercialization, the technology transfer sending unit must successfully transfer knowledge about both the product and the process to the receiving unit. A key strategy for maximizing successful scale-up and transfer efforts is the effective use of engineering and shake-down runs to confirm operational performance and product quality prior to embarking on good manufacturing practice runs such as process performance qualification runs. We consider key factors to consider in making the decision to perform shake-down or engineering runs. We also present industry benchmarking results of how engineering runs are used in drug substance technology transfers alongside the main themes and best practices that have emerged. Our goal is to provide companies with a framework for ensuring the "right first time" technology transfers with effective deployment of resources within increasingly aggressive timeline constraints. PMID:26429113

  13. Shakedown of Composite Frames Taking into Account Plastic and Brittle Fracture of Elements

    NASA Astrophysics Data System (ADS)

    Alawdin, Piotr; Bulanov, George

    2015-03-01

    In the paper the mathematical model of the optimization problem of limit and shakedown analysis for composite plane frames, containing elastic-plastic and brittle elements under low-cyclic loading, is proposed. It is assumed that the load varies randomly within the specified domain, and limited plastic redistribution of forces in such structures occurs. An example of the shakedown analyses of the composite frame is given.

  14. PEP Run Report for Simulant Shakedown/Functional Testing

    SciTech Connect

    Josephson, Gary B.; Geeting, John GH; Bredt, Ofelia P.; Burns, Carolyn A.; Golovich, Elizabeth C.; Guzman-Leong, Consuelo E.; Kurath, Dean E.; Sevigny, Gary J.

    2009-12-29

    Pacific Northwest National Laboratory (PNNL) has been tasked by Bechtel National Inc. (BNI) on the River Protection Project-Waste Treatment Plant (RPP-WTP) project to perform research and development activities to resolve technical issues identified for the Pretreatment Facility (PTF). The Pretreatment Engineering Platform (PEP) was designed, constructed, and operated as part of a plan to respond to issue M12, "Undemonstrated Leaching Processes." The PEP is a 1/4.5-scale test platform designed to simulate the WTP pretreatment caustic leaching, oxidative leaching, ultrafiltration solids concentration, and slurry washing processes. The PEP replicates the WTP leaching processes using prototypic equipment and control strategies. The PEP also includes non-prototypic ancillary equipment to support the core processing. Two operating scenarios are currently being evaluated for the ultrafiltration process (UFP) and leaching operations. The first scenario has caustic leaching performed in the UFP-2 ultrafiltration feed vessels (i.e., vessel UFP-VSL-T02A in the PEP; and vessels UFP-VSL-00002A and B in the WTP PTF). The second scenario has caustic leaching conducted in the UFP-1 ultrafiltration feed preparation vessels (i.e., vessels UFP-VSL-T01A and B in the PEP; vessels UFP-VSL-00001A and B in the WTP PTF). In both scenarios, 19-M sodium hydroxide solution (NaOH, caustic) is added to the waste slurry in the vessels to leach solid aluminum compounds (e.g., gibbsite, boehmite). Caustic addition is followed by a heating step that uses direct injection of steam to accelerate the leach process. Following the caustic leach, the vessel contents are cooled using vessel cooling jackets and/or external heat exchangers. The main difference between the two scenarios is that for leaching in UFP-1, the 19-M NaOH is added to un-concentrated waste slurry (3-8 wt% solids), while for leaching in UFP-2, the slurry is concentrated to nominally 20 wt% solids using cross-flow ultrafiltration

  15. Shakedown based model for high-cycle fatigue of shape memory alloys

    NASA Astrophysics Data System (ADS)

    Gu, Xiaojun; Moumni, Ziad; Zaki, Wael; Zhang, Weihong

    2016-11-01

    The paper presents a high-cycle fatigue criterion for shape memory alloys (SMAs) based on shakedown analysis. The analysis accounts for phase transformation as well as reorientation of martensite variants as possible sources of fatigue damage. In the case of high-cycle fatigue, once the structure has reached an asymptotic state, damage is assumed to become confined at the mesoscopic scale, or the scale of the grain, with no discernable inelasticity at the macroscopic scale. Using a multiscale approach, a high-cycle fatigue criterion analogous to the Dang Van model (Dang Van 1973) for elastoplastic metals is derived for SMAs obeying the Zaki–Moumni model for SMAs (Zaki and Moumni 2007a). For these alloys, a safe domain is established in stress deviator space, consisting of a hypercylinder with axis parallel to the direction of martensite orientation at the mesoscopic scale. Safety with regard to high-cycle fatigue, upon elastic shakedown, is conditioned by the persistence of the macroscopic stress path at every material point within the hypercylinder, whose size depends on the volume fraction of martensite. The proposed criterion computes a fatigue factor at each material point, indicating its degree of safeness with respect to high cycle fatigue.

  16. Experimental techniques for characterizing the thermo-electro-mechanical shakedown response of SMA wires and tubes

    NASA Astrophysics Data System (ADS)

    Churchill, Christopher B.

    Shape Memory Alloys (SMAs) are a unique and valuable group of active materials. NiTi, the most popular SMA, has a power density orders of magnitude greater than any other known material, making it valuable in the medical and transportation industries where weight and space are at a premium. In the nearly half-century since its discovery, the adoption of NiTi has been slowed primarily by the engineering difficulties associated with its use: strong thermal coupling, material level instabilities, and rapid shakedown of material properties during cycling. Material properties change drastically with minute changes in alloy composition, so it is common to require a variety of experiments to fully characterize a new SMA material, all of which must be performed and interpreted with specialized techniques. This thesis collects many of these techniques into a series of characterization experiments, documenting several new phenomena in the process. First, three different alloys of NiTi wire are characterized through differential scanning calorimetry, isothermal tension, and constant load thermal cycling experiments. New techniques are presented for ER measurement and temperature control of SMA wires and temperature measurement of SMA tubes. It is shown that the shakedown of material properties with thermal cycling is not only dependent on the applied load and number of cycles, but has a large association with the direction of phase transformation. Several of these techniques are then applied to a systematic characterization of NiTi tubes in tension, compression, and bending. Particular attention is given to the nucleation and propagation of transformation fronts in tensile specimens. Compression experiments show dramatic asymmetry in the uniaxial response, with compression characterized by a lower transformation strain, higher transformation stress, and uniform transformations (no fronts). A very simple SMA actuator model is introduced. After identifying the relevant non

  17. An elastoplastic model based on the shakedown concept for flexible pavements unbound granular materials

    NASA Astrophysics Data System (ADS)

    Habiballah, Taha; Chazallon, Cyrille

    2005-05-01

    Nowadays, the problem of rutting of flexible pavements linked to permanent deformations occurring in the unbound layers is taken into account only by mechanistic empirical formulas. Finite element modelling of realistic boundary value problems with incremental rheological models will lead to unrealistic calculation time for large cycle numbers. The objective of the authors is to present a simplified model which can be used to model the flexible pavements rutting with the finite elements framework. This method is based on the shakedown theory developed by Zarka which is usually associated to materials like steels. It has been adapted for granular materials by introducing a yield surface taking into account the mean stress influence on the mechanical behaviour and a dependency of the hardening modulus with the stress state. The Drucker-Prager yield surface has been used with a non-associated flow rule. Comparisons with repeated load triaxial tests carried out on a subgrade soil have been done. These comparisons underline the capabilities of the model to take into account the cyclic behaviour of unbound materials for roads. Finally, a discussion, dealing with the use of the simplified method within a finite element modelling of a full-scale experiment, is presented.

  18. Explaining physicians' use of EMR systems and performance in the shakedown phase

    PubMed Central

    Venkatesh, Viswanath; Rai, Arun

    2011-01-01

    Objective This work seeks to complement and extend prior work by using a multidisciplinary approach to explain electronic medical records (EMR) system use and consequent performance (here, patient satisfaction) among physicians during early stages of the implementation of an EMR. Design This was a quantitative study, with data obtained from three distinct sources: individual-level and social-network data from employees; use data from EMR system logs; and patient satisfaction data from patients and/or authorized decision-makers. Responses were obtained from 151 physicians and 8440 patient satisfaction surveys over the course of a 1-year period at the shakedown phase of an EMR system implementation. Results Physicians who were better connected, both directly and indirectly, to their peers—that is, other physicians—for advice on their work, used the system less than those who were less connected. In addition to such social network ties, demographic characteristics (gender and age), three personality characteristics (openness to experience, agreeableness and extroversion) and a key technology perception (perceived usefulness) predicted EMR system use. Conclusions For hospital administrators and other stakeholders, understanding the contributors to, and the relative importance of, various factors in explaining EMR system use, and its impact on patient satisfaction is of great importance. The factors identified in this work that influence a physician's use of EMR systems can be used to develop interventions and applications that can increase physician buy-in and use of EMR systems. PMID:21292704

  19. Design, construction, operation, and evaluation of a prototype culm combustion boiler/heater unit. Quarterly technical progress report, October 1-December 21, 1981

    SciTech Connect

    Not Available

    1982-01-01

    This report provides a summary of the work performed on the Prototype Culm Combustion Boiler/Heater Unit, Phase I - Engineering Design and Analysis, Phase II - Prototype Plant Construction and Phase III - Start-Up and Operation during the period October 1, 1981 through December 31, 1981. The objectives of the program as well as the technical progress and problem areas encountered during the reporting period are presented. Seven shakedown tests were run. Start-up and shakedown testing was completed. Four parametric tests were run. Performance data are presented with the exception of boiler efficiency which will be reported once chemical analyses are completed. Total boiler operation time through the end of this quarter - 1225 h, 50 min; operating time on culm and culm/limestone - 682 h, 43 min. Inspection revealed no problems with boiler tube wear. Sulfur capture greater than 94% was demonstrated (design is 88%). A turndown of better than 4 to 1 was shown (design is 2.5 to 1). Computer control of most of the loops has been successful and manual control was also demonstrated.

  20. SRC-I: revised baseline supplement. [Cash flows associated with Phase IIIC extended operation of SRC-I Demonstration Plant

    SciTech Connect

    Not Available

    1984-07-01

    The recently submitted Revised SRC-I Project Baseline included 30 months of plant operations. This period is divided into two sub-phases: IIIA and IIIB. Phase IIIA is six months in duration and is defined as Startup and Shakedown of the Demonstration Plant. Phase IIIB is two years in duration and encompasses two years of test operations. The Prime Contract allowed for the possibility of up to three additional years of test operations. This extension, Phase IIIC, was subject to mutual agreement by ICRC and DOE. It was also dependent upon a formal Notice of Buyout and plan for expansion of the Demonstration Plant. Pursuant to DOE instructions, the cash flows associated with Phase IIIC have been prepared consistent with the Revised SRC-I Project Baseline and are herewith included.

  1. Operation of the radioactive acid digestion test unit

    SciTech Connect

    Blasewitz, A.G.; Allen, C.R.; Lerch, R.E.; Ely, P.C.; Richardson, G.L.

    1980-01-01

    The Radioactive Acid Digestion Test Unit (RADTU) has been constructed at Hanford to demonstrate the application of the Acid Digestion Process for treating combustible transuranic wastes and scrap materials. The RADTU with its original tray digestion vessel has recently completed a six-month campaign processing potentially contaminated nonglovebox wastes from a Hanford plutonium facility. During this campaign, it processed 2100 kg of largely cellulosic wastes at an average sustained processing rate of 3 kg/h as limited by the water boiloff rate from the acid feeds. The on-line operating efficiency was nearly 50% on a twelve hour/day, five day/week basis. Following this campaign, a new annular high rate digester has been installed for testing. In preliminary tests with simulated wastes, the new digester demonstrated a sustained capacity of 10 kg/h with greatly improved intimacy of contact between the digestion acid and the waste. The new design also doubles the heat transfer surface, which with reduced heat loss area, is expected to provide at least three times the water boiloff rate of the previous tray digester design. Following shakedown testing with simulated and low-level wastes, the new unit will be used to process combustible plutonium scrap and waste from Hanford plutonium facilities for the purposes of volume reduction, plutonium recovery, and stabilization of the final waste form.

  2. Operational Amplifiers.

    ERIC Educational Resources Information Center

    Foxcroft, G. E.

    1986-01-01

    Addresses the introduction of low cost equipment into high school and college physical science classes. Examines the properties of an "ideal" operational amplifier and discusses how it might be used under saturated and non-saturated conditions. Notes the action of a "real" operational amplifier. (TW)

  3. Operating Systems.

    ERIC Educational Resources Information Center

    Denning, Peter J.; Brown, Robert L.

    1984-01-01

    A computer operating system spans multiple layers of complexity, from commands entered at a keyboard to the details of electronic switching. In addition, the system is organized as a hierarchy of abstractions. Various parts of such a system and system dynamics (using the Unix operating system as an example) are described. (JN)

  4. Payload Operations

    NASA Technical Reports Server (NTRS)

    Cissom, R. D.; Melton, T. L.; Schneider, M. P.; Lapenta, C. C.

    1999-01-01

    The objective of this paper is to provide the future ISS scientist and/or engineer a sense of what ISS payload operations are expected to be. This paper uses a real-time operations scenario to convey this message. The real-time operations scenario begins at the initiation of payload operations and runs through post run experiment analysis. In developing this scenario, it is assumed that the ISS payload operations flight and ground capabilities are fully available for use by the payload user community. Emphasis is placed on telescience operations whose main objective is to enable researchers to utilize experiment hardware onboard the International Space Station as if it were located in their terrestrial laboratory. An overview of the Payload Operations Integration Center (POIC) systems and user ground system options is included to provide an understanding of the systems and interfaces users will utilize to perform payload operations. Detailed information regarding POIC capabilities can be found in the POIC Capabilities Document, SSP 50304.

  5. Warehousing Operations.

    ERIC Educational Resources Information Center

    Marine Corps Inst., Washington, DC.

    Developed as part of the Marine Corps Institute (MCI) correspondence training program, this course on warehousing operations is designed to provide instruction in the procedures used in warehousing operations. Introductory materials include specific information for MCI students and a study guide (guidelines to complete the course). The 22-hour…

  6. Operant Conditioning

    PubMed Central

    Staddon, J. E. R.; Cerutti, D. T.

    2005-01-01

    Operant behavior is behavior “controlled” by its consequences. In practice, operant conditioning is the study of reversible behavior maintained by reinforcement schedules. We review empirical studies and theoretical approaches to two large classes of operant behavior: interval timing and choice. We discuss cognitive versus behavioral approaches to timing, the “gap” experiment and its implications, proportional timing and Weber's law, temporal dynamics and linear waiting, and the problem of simple chain-interval schedules. We review the long history of research on operant choice: the matching law, its extensions and problems, concurrent chain schedules, and self-control. We point out how linear waiting may be involved in timing, choice, and reinforcement schedules generally. There are prospects for a unified approach to all these areas. PMID:12415075

  7. Catalyzed steam gasification of biomass. Phase 3: Biomass Process Development Unit (PDU) construction and initial operation

    NASA Astrophysics Data System (ADS)

    Healey, J. J.; Hooverman, R. H.

    1981-12-01

    The design and construction of the process development unit (PDU) are described in detail, examining each system and component in order. Siting, the chip handling system, the reactor feed system, the reactor, the screw conveyor, the ash dump system, the PDU support equipment, control and information management, and shakedown runs are described.

  8. Applied Operations Research: Operator's Assistant

    NASA Technical Reports Server (NTRS)

    Cole, Stuart K.

    2015-01-01

    NASA operates high value critical equipment (HVCE) that requires trouble shooting, periodic maintenance and continued monitoring by Operations staff. The complexity HVCE and information required to maintain and trouble shoot HVCE to assure continued mission success as paper is voluminous. Training on new HVCE is commensurate with the need for equipment maintenance. LaRC Research Directorate has undertaken a proactive research to support Operations staff by initiation of the development and prototyping an electronic computer based portable maintenance aid (Operator's Assistant). This research established a goal with multiple objectives and a working prototype was developed. The research identified affordable solutions; constraints; demonstrated use of commercial off the shelf software; use of the US Coast Guard maintenance solution; NASA Procedure Representation Language; and the identification of computer system strategies; where these demonstrations and capabilities support the Operator, and maintenance. The results revealed validation against measures of effectiveness and overall proved a substantial training and capability sustainment tool. The research indicated that the OA could be deployed operationally at the LaRC Compressor Station with an expectation of satisfactorily results and to obtain additional lessons learned prior to deployment at other LaRC Research Directorate Facilities. The research revealed projected cost and time savings.

  9. Operation Galileo

    NASA Technical Reports Server (NTRS)

    1996-01-01

    The Operation Galileo education program took off with the first of four flights on board a U.S. Air Force C-130 transport aircraft from Keesler Air Force Base, Miss. Teachers from Mississippi and Louisiana participated in the program which aims to enhance math and science education of high-risk students by allowing junior high and middle school teachers, students and parents to fly in cargo and tanker aircraft during routine training missions. The Air Force Reserve created Operation Galileo, which was implemented by NASA's Educator Resource Center at Stennis.

  10. Operation Uplift...

    ERIC Educational Resources Information Center

    NJEA Review, 1975

    1975-01-01

    Article described a model policy on student care and counseling for prevention of drug and alcohol dependency. It was adopted by the Department of School Nurses through funding by the National Education Association for Operation Uplift--Better Health for Better Learning. (Author/RK)

  11. Operations Research.

    ERIC Educational Resources Information Center

    O'Neill, Edward T.

    1984-01-01

    Describes operations research as an important management tool that can aid library managers in effectively using available resources and as a set of analytical tools that can enable researchers to better understand library and information services. Early history, definition, models, applications to libraries, and impact are noted. Twenty-five…

  12. Operating Efficiently

    ERIC Educational Resources Information Center

    Kennedy, Mike

    2010-01-01

    The ailing economy has spared few schools and universities. Faced with funding cutbacks, most education administrators have had to make difficult choices about where to allocate dwindling resources. Even in the best of financial times, educating students is the first priority. When money is tight, school maintenance and operations (M&O) programs…

  13. Establishing operations

    PubMed Central

    Michael, Jack

    1993-01-01

    The first two books on behavior analysis (Skinner, 1938; Keller & Schoenfeld, 1950) had chapter-length coverage of motivation. The next generation of texts also had chapters on the topic, but by the late 1960s it was no longer being given much treatment in the behavior-analytic literature. The present failure to deal with the topic leaves a gap in our understanding of operant functional relations. A partial solution is to reintroduce the concept of the establishing operation, defined as an environmental event, operation, or stimulus condition that affects an organism by momentarily altering (a) the reinforcing effectiveness of other events and (b) the frequency of occurrence of that part of the organism's repertoire relevant to those events as consequences. Discriminative and motivative variables can be distinguished as follows: The former are related to the differential availability of an effective form of reinforcement given a particular type of behavior; the latter are related to the differential reinforcing effectiveness of environmental events. An important distinction can also be made between unconditioned establishing operations (UEOs), such as food deprivation and painful stimulation, and conditioned establishing operations (CEOs) that depend on the learning history of the organism. One type of CEO is a stimulus that has simply been paired with a UEO and as a result may take on some of the motivative properties of that UEO. The warning stimulus in avoidance procedures is another important type of CEO referred to as reflexive because it establishes its own termination as a form of reinforcement and evokes the behavior that has accomplished such termination. Another CEO is closely related to the concept of conditional conditioned reinforcement and is referred to as a transitive CEO, because it establishes some other stimulus as a form of effective reinforcement and evokes the behavior that has produced that other stimulus. The multiple control of human

  14. Operation Poorman

    SciTech Connect

    Pruvost, N.; Tsitouras, J.

    1981-03-18

    The objectives of Operation Poorman were to design and build a portable seismic system and to set up and use this system in a cold-weather environment. The equipment design uses current technology to achieve a low-power, lightweight system that is configured into three modules. The system was deployed in Alaska during wintertime, and the results provide a basis for specifying a mission-ready seismic verification system.

  15. Operations automation

    NASA Technical Reports Server (NTRS)

    Boreham, Charles Thomas

    1994-01-01

    This is truly the era of 'faster-better-cheaper' at the National Aeronautics and Space Administration/Jet Propulsion Laboratory (NASA/JPL). To continue JPL's primary mission of building and operating interplanetary spacecraft, all possible avenues are being explored in the search for better value for each dollar spent. A significant cost factor in any mission is the amount of manpower required to receive, decode, decommutate, and distribute spacecraft engineering and experiment data. The replacement of the many mission-unique data systems with the single Advanced Multimission Operations System (AMMOS) has already allowed for some manpower reduction. Now, we find that further economies are made possible by drastically reducing the number of human interventions required to perform the setup, data saving, station handover, processed data loading, and tear down activities that are associated with each spacecraft tracking pass. We have recently adapted three public domain tools to the AMMOS system which allow common elements to be scheduled and initialized without the normal human intervention. This is accomplished with a stored weekly event schedule. The manual entries and specialized scripts which had to be provided just prior to and during a pass are now triggered by the schedule to perform the functions unique to the upcoming pass. This combination of public domain software and the AMMOS system has been run in parallel with the flight operation in an online testing phase for six months. With this methodology, a savings of 11 man-years per year is projected with no increase in data loss or project risk. There are even greater savings to be gained as we learn other uses for this configuration.

  16. Operating internationally

    SciTech Connect

    Seeley, R.S.

    1994-02-01

    When Enron Power Corp. took over a 28 MW power facility at the former US Naval base in Subic Bay, the Philippines, the company was required to employ 139 people to run the plant. This large labor force was necessary not because of the plant's operational needs, but because of local labor practices and unemployment pressures. Independent power companies have become all too familiar with the high cost and complexity of developing projects in emerging international markets. Some of the most significant issues involve taxation, unfamiliar legal systems, changing regulations, and foreign investment restrictions. In addition, questions about currency exchange, national credit worthiness, and political stability add to the difficulty of international development. However, one of the most daunting challenges centers not on development, but on long-term operations and maintenance (O M). A key concern is finding qualified labor. Most developers and O M companies agree that local people should run the plant, with the top person, or persons, thoroughly trained in the developer's company philosophy.

  17. Helium ELMy H-modes in Alcator C-Mod in Support of ITER Helium Operating Phases

    NASA Astrophysics Data System (ADS)

    Kessel, C. E.; Wolfe, S. M.; Chilenski, M. A.; Hughes, J. W.; Lin, Y.; Reinke, M. L.; Wukitch, S. J.; C-Mod Team

    2015-11-01

    ITER will operate helium majority plasmas in its earlier phases to shakedown the facility and provide plasmas in both L-mode and H-mode for commissioning and preparation for DT burning plasma operation. Part of this activity is to produce ELMy H-modes to test ELM mitigation schemes and observe the ELM impacts on the plasma facing components. It is of interest to characterize helium ELMy H-modes on present experiments to provide some basis to project to ITER and anticipate the plasma performance and ability to obtain H-modes with sufficient performance. ELMy H-mode is accessed in C-Mod by using LSN with an elongation of about 1.55, and with high lower triangularity and low upper triangularity. These regimes were produced with 1.5-4.0 MW of ICRF heating, and with H-mode line average densities of 2.0-3.2x1020 /m3, producing higher frequency repetitive to large infrequent ELMs, respectively. The infrequent ELM regime showed a cross between EDA and ELMy H-mode, with the EDA signature of a quasi-coherent mode at about 200 kHz. Tungsten laser blow-off was done. The pedestal features, energy confinement, ELM character, L-H threshold (1.7-2.5 MW) and W confinement will be discussed. Comparisons with deuterium ELMy H-modes will be made. Work supported by DOE DE-AC02-09CH11466 and DE-FC02-99ER54512.

  18. Space station operations management

    NASA Technical Reports Server (NTRS)

    Cannon, Kathleen V.

    1989-01-01

    Space Station Freedom operations management concepts must be responsive to the unique challenges presented by the permanently manned international laboratory. Space Station Freedom will be assembled over a three year period where the operational environment will change as significant capability plateaus are reached. First Element Launch, Man-Tended Capability, and Permanent Manned Capability, represent milestones in operational capability that is increasing toward mature operations capability. Operations management concepts are being developed to accomodate the varying operational capabilities during assembly, as well as the mature operational environment. This paper describes operations management concepts designed to accomodate the uniqueness of Space Station Freedoom, utilizing tools and processes that seek to control operations costs.

  19. STS upper stage operations

    NASA Technical Reports Server (NTRS)

    Kitchens, M. D.; Schnyer, A. D.

    1977-01-01

    Several design/development and operational approaches for STS upper stages are being pursued to realize maximum operational and economic benefits upon the introduction of the STS in the 1980s. The paper focuses special attention on safety operations, launch site operations and on-orbit operations.

  20. Operator pencil passing through a given operator

    SciTech Connect

    Biggs, A. E-mail: adam.biggs@student.manchester.ac.uk; Khudaverdian, H. M. E-mail: adam.biggs@student.manchester.ac.uk

    2013-12-15

    Let Δ be a linear differential operator acting on the space of densities of a given weight λ{sub 0} on a manifold M. One can consider a pencil of operators Π-circumflex(Δ)=(Δ{sub λ}) passing through the operator Δ such that any Δ{sub λ} is a linear differential operator acting on densities of weight λ. This pencil can be identified with a linear differential operator Δ-circumflex acting on the algebra of densities of all weights. The existence of an invariant scalar product in the algebra of densities implies a natural decomposition of operators, i.e., pencils of self-adjoint and anti-self-adjoint operators. We study lifting maps that are on one hand equivariant with respect to divergenceless vector fields, and, on the other hand, with values in self-adjoint or anti-self-adjoint operators. In particular, we analyze the relation between these two concepts, and apply it to the study of diff (M)-equivariant liftings. Finally, we briefly consider the case of liftings equivariant with respect to the algebra of projective transformations and describe all regular self-adjoint and anti-self-adjoint liftings. Our constructions can be considered as a generalisation of equivariant quantisation.

  1. Biomedical programs operations plans

    NASA Technical Reports Server (NTRS)

    Walbrecher, H. F.

    1974-01-01

    Operational guidelines for the space shuttle life sciences payloads are presented. An operational assessment of the medical experimental altitude test for Skylab, and Skylab life sciences documentation are discussed along with the operations posture and collection of space shuttle operational planning data.

  2. Elementary operators on self-adjoint operators

    NASA Astrophysics Data System (ADS)

    Molnar, Lajos; Semrl, Peter

    2007-03-01

    Let H be a Hilbert space and let and be standard *-operator algebras on H. Denote by and the set of all self-adjoint operators in and , respectively. Assume that and are surjective maps such that M(AM*(B)A)=M(A)BM(A) and M*(BM(A)B)=M*(B)AM*(B) for every pair , . Then there exist an invertible bounded linear or conjugate-linear operator and a constant c[set membership, variant]{-1,1} such that M(A)=cTAT*, , and M*(B)=cT*BT, .

  3. Space Station operations

    NASA Technical Reports Server (NTRS)

    Gray, R. H.

    1985-01-01

    An evaluation of the success of the Space Station will be based on the service provided to the customers by the Station crew, the productivity of the crew, and the costs of operation. Attention is given to details regarding Space Station operations, a summary of operational philosophies and requirements, logistics and resupply operations, prelaunch processing and launch operations, on-orbit operations, aspects of maintainability and maintenance, habitability, and questions of medical care. A logistics module concept is considered along with a logistics module processing timeline, a habitability module concept, and a Space Station rescue mission.

  4. Computer algebra and operators

    NASA Technical Reports Server (NTRS)

    Fateman, Richard; Grossman, Robert

    1989-01-01

    The symbolic computation of operator expansions is discussed. Some of the capabilities that prove useful when performing computer algebra computations involving operators are considered. These capabilities may be broadly divided into three areas: the algebraic manipulation of expressions from the algebra generated by operators; the algebraic manipulation of the actions of the operators upon other mathematical objects; and the development of appropriate normal forms and simplification algorithms for operators and their actions. Brief descriptions are given of the computer algebra computations that arise when working with various operators and their actions.

  5. Training and Tactical Operationally Responsive Space Operations

    NASA Astrophysics Data System (ADS)

    Sorensen, B.; Strunce, R., Jr.

    Current space assets managed by traditional space system control resources provide communication, navigation, intelligence, surveillance, and reconnaissance (ISR) capabilities using satellites that are designed for long life and high reliability. The next generation Operationally Responsive Space (ORS) systems are aimed at providing operational space capabilities which will provide flexibility and responsiveness to the tactical battlefield commander. These capabilities do not exist today. The ORS communication, navigation, and ISR satellites are being designed to replace or supplement existing systems in order to enhance the current space force. These systems are expected to rapidly meet near term space needs of the tactical forces. The ORS concept includes new tactical satellites specifically designed to support contingency operations such as increased communication bandwidth and ISR imagery over the theater for a limited period to support air, ground, and naval force mission. The Concept of Operations (CONOPS) that exists today specifies that in addition to operational control of the satellite, the tasking and scheduling of the ORS tactical satellite for mission data collection in support of the tactical warfighter will be accomplished within the Virtual Mission Operations Center (VMOC). This is very similar to what is currently being accomplished in a fixed Mission Operations Center on existing traditional ISR satellites. The VMOC is merely a distributed environment and the CONOPS remain virtually the same. As a result, there is a significant drawback to the current ORS CONOPS that does not account for the full potential of the ORS paradigm for supporting tactical forces. Although the CONOPS approach may be appropriate for experimental Tactical Satellites (TacSat), it ignores the issues associated with the In-Theater Commander's need to own and operate his dedicated TacSat for most effective warfighting as well as the Warfighter specific CONOPS. What is needed

  6. Crew Transportation Operations Standards

    NASA Technical Reports Server (NTRS)

    Mango, Edward J.; Pearson, Don J. (Compiler)

    2013-01-01

    The Crew Transportation Operations Standards contains descriptions of ground and flight operations processes and specifications and the criteria which will be used to evaluate the acceptability of Commercial Providers' proposed processes and specifications.

  7. Major operations and activities

    SciTech Connect

    Black, D.G.

    1995-06-01

    This section of the 1994 Hanford Site Environmental Report summarizes the major operations and activities on the site. These operations and activities include site management, waste management, environmental restoration and corrective actions, and research and technology development.

  8. Lageos assembly operation plan

    NASA Technical Reports Server (NTRS)

    Brueger, J.

    1975-01-01

    Guidelines and constraints procedures for LAGEOS assembly, operation, and design performance are given. Special attention was given to thermal, optical, and dynamic analysis and testing. The operation procedures illustrate the interrelation and sequence of tasks in a flow diagram. The diagram also includes quality assurance functions for verification of operation tasks.

  9. Operating US power reactors

    SciTech Connect

    Silver, E.G.

    1982-07-01

    The operation of US power reactors during March and April 1982 is summarized. Events of special note are discussed in the text, and the operational performance of all licensed power reactors is presented. These data are taken from the monthly Operating Units Status Report prepared by the Nuclear Regulatory Commission (NRC).

  10. Operations and maintenance philosophy

    SciTech Connect

    DUNCAN, G.P.

    1999-10-28

    This Operations and Maintenance (O&M) Philosophy document is intended to establish a future O&M vision, with an increased focus on minimizing worker exposure, ensuring uninterrupted retrieval operations, and minimizing operation life-cycle cost. It is intended that this document would incorporate O&M lessons learned into on-going and future project upgrades.

  11. Problem Behaviors as Operants

    ERIC Educational Resources Information Center

    Hoyer, William J.; And Others

    1975-01-01

    Many of the clinically disabling behaviors of elderly persons may be viewed as operants. Research bearing on the efficacy of operant techniques for programming individualized, group based, and ward-wide therapeutic intervention is reviewed. Suggests the operant view is useful for conceptualizing and treating many problem behaviors of elderly…

  12. Shuttle operations era planning for flight operations

    NASA Technical Reports Server (NTRS)

    Holt, J. D.; Beckman, D. A.

    1984-01-01

    The Space Transportation System (STS) provides routine access to space for a wide range of customers in which cargos vary from single payloads on dedicated flights to multiple payloads that share Shuttle resources. This paper describes the flight operations planning process from payload introduction through flight assignment to execution of the payload objectives and the changes that have been introduced to improve that process. Particular attention is given to the factors that influence the amount of preflight preparation necessary to satisfy customer requirements. The partnership between the STS operations team and the customer is described in terms of their functions and responsibilities in the development of a flight plan. A description of the Mission Control Center (MCC) and payload support capabilities completes the overview of Shuttle flight operations.

  13. PDX operating controls

    SciTech Connect

    Mathe, P.; Robertson, R.; Woolley, R.D.

    1981-01-01

    The Poloidal Divertor experiment began operation in November 1978. Some of the operating controls were in working condition a year before that date for power tests. In fact, a very similar system to the one used for PDX operated the FM-1 experiment as early as 1971. The functional block diagram of the PDX operating controls is shown. The operating console provides the man-machine interface during the experiment. Most status lights and pushbotton controls are directly interfaced to the IBM 1800 computer. This computer in conjunction with an IPC-300 programmable controller and a CAMAC serial highway system, performs the supervisory and control functions associated with the various PDX subsystems.

  14. Payload operation television system

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The Payload Operation Television System is a high performance closed-circuit TV system designed to determine the feasibility of using TV to augment purely visual monitoring of operations, and to establish optimum system design of an operating unit which can ultimately be used to assist the operator of a remotely manipulated space-borne cargo loading device. The TV system assembled on this program is intended for laboratory experimentation which would develop operational techniques and lead to the design of space-borne TV equipment whose purpose would be to assist the astronaut-operator aboard a space station to load payload components. The equipment consists principally of a good quality TV camera capable of high resolving power; a TV monitor; a sync generator for driving camera and monitor; and two pan/tilt units which are remotely controlled by the operator.

  15. Columbia undergoes final shakedown during seven-day STS-4 mission

    NASA Technical Reports Server (NTRS)

    1982-01-01

    The launch preparations for the Space Transportation System 4 flight of the space shuttle Columbia are described. The details of the spacecraft's mission profile are given. Several experiments and payloads are described. An account of the remote manipulator system is given. Studies of long-term thermal extremes on the orbiter subsystems and a survey of orbiter induced contamination of the payload bay are identified as mission priorities.

  16. Evaluation of the US/Canada wheat and barley exploratory experiment shakedown test analyst labeling results

    NASA Technical Reports Server (NTRS)

    Carnes, J. G. (Principal Investigator)

    1981-01-01

    Labeling accuracies using the reformatted labeling procedure are evaluated. The procedure is described and the decision logic applied to six LANDSAT segments from the 1978 crop year. Small grains and nonsmall grains are labeled, and small grains differentiated from barley. An error analysis was performed. Recommended changes to the reformatted procedure are presented.

  17. Operational health physics.

    PubMed

    Miller, Kenneth L

    2005-01-01

    A review of the operational health physics papers published in Health Physics and Operational Radiation Safety over the past fifteen years indicated seventeen general categories or areas into which the topics could be readily separated. These areas include academic research programs, use of computers in operational health physics, decontamination and decommissioning, dosimetry, emergency response, environmental health physics, industrial operations, medical health physics, new procedure development, non-ionizing radiation, radiation measurements, radioactive waste disposal, radon measurement and control, risk communication, shielding evaluation and specification, staffing levels for health physics programs, and unwanted or orphan sources. That is not to say that there are no operational papers dealing with specific areas of health physics, such as power reactor health physics, accelerator health physics, or governmental health physics. On the contrary, there have been a number of excellent operational papers from individuals in these specialty areas and they are included in the broader topics listed above. A listing and review of all the operational papers that have been published is beyond the scope of this discussion. However, a sampling of the excellent operational papers that have appeared in Health Physics and Operational Radiation Safety is presented to give the reader the flavor of the wide variety of concerns to the operational health physicist and the current areas of interest where procedures are being refined and solutions to problems are being developed.

  18. Operational health physics.

    PubMed

    Miller, Kenneth L

    2005-06-01

    A review of the operational health physics papers published in Health Physics and Operational Radiation Safety over the past fifteen years indicated seventeen general categories or areas into which the topics could be readily separated. These areas include academic research programs, use of computers in operational health physics, decontamination and decommissioning, dosimetry, emergency response, environmental health physics, industrial operations, medical health physics, new procedure development, non-ionizing radiation, radiation measurements, radioactive waste disposal, radon measurement and control, risk communication, shielding evaluation and specification, staffing levels for health physics programs, and unwanted or orphan sources. That is not to say that there are no operational papers dealing with specific areas of health physics, such as power reactor health physics, accelerator health physics, or governmental health physics. On the contrary, there have been a number of excellent operational papers from individuals in these specialty areas and they are included in the broader topics listed above. A listing and review of all the operational papers that have been published is beyond the scope of this discussion. However, a sampling of the excellent operational papers that have appeared in Health Physics and Operational Radiation Safety is presented to give the reader the flavor of the wide variety of concerns to the operational health physicist and the current areas of interest where procedures are being refined and solutions to problems are being developed.

  19. Hermeneutic operative calculus

    NASA Astrophysics Data System (ADS)

    Ramakrishnan, Sivakumar; Isawasan, Pradeep; Mohanan, Vasuky

    2014-07-01

    The predicate calculus used currently by mathematical logic in computer science, philosophy and linguistic was found to be too restrictive and inadequate for describing the grammar of natural and artificial language. Therefore many higher order logics have been developed to overcome the limitation of predicate calculus. In this paper a new representation of logic using mathematical principles has been developed for the natural language called Hermeneutic Operative Calculus. This Hermeneutic Operative Calculus is a new language interpretive calculus developed to account for the syntactic, semantic and pragmatic features of natural language and allows removing the restrictions of any particular natural language in the semantic field its map out. The logic of Hermeneutic Operative Calculus capable of represent the syntactic and semantic of factual information of a natural language precisely in any language. The logic of this Hermeneutic Operative Calculus has two different forms of operations called object and meta-operations. The object operation allow for listing the various objects, picturing the various propositions and so forth. The meta-operation would specify what cannot be specified by the object operation like semantical stances of a proposition. The basic operative processes of linguistics and cognitive logic will be mathematically conceptualized and elaborated in this paper.

  20. Ulysses mission operations

    NASA Technical Reports Server (NTRS)

    Beech, P.

    1992-01-01

    The Ulysses mission is described in terms of in-Shuttle operations, initial in-orbit operations, routine operations, operational organization, and data gathering and production. The configuration of the Ulysses payload is illustrated, and the flight to orbit is described including a three-hour on-orbit checkout. The first contact was reported at the Deep Space Network station followed by an adjustment of the spacecraft solar-aspect angle and the acquisition of ranging and Doppler data. In-orbit operations include the earth acquisition maneuver, a trajectory correction maneuver, and a payload switch. Continuous data gathering is discussed with reference to the Jupiter encounter and the first and second oppositions and conjunctions. The data-gathering components comprise ground stations, a data-processing computer, and a data-records system. Data production is performed in an off-line mode that does not interfere with the real-time operations.

  1. Cask fleet operations study

    SciTech Connect

    Not Available

    1988-01-01

    The Nuclear Waste Policy Act of 1982 assigned to the Department of Energy's (DOE) Office of Civilian Waste Management the responsibility for disposing of high-level waste and spent fuel. A significant part of that responsibility involves transporting nuclear waste materials within the federal waste management system; that is, from the waste generator to the repository. The lead responsibility for transportation operations has been assigned to Oak Ridge Operations, with Oak Ridge National Laboratory (ORNL) providing technical support through the Transportation Operations Support Task Group. One of the ORNL support activities involves assessing what facilities, equipment and services are required to assure that an acceptable, cost-effective and safe transportation operations system can be designed, operated and maintained. This study reviews, surveys and assesses the experience of Nuclear Assurance Corporation (NAC) in operating a fleet of spent-fuel shipping casks to aid in developing the spent-fuel transportation system.

  2. Operations management system

    NASA Technical Reports Server (NTRS)

    Brandli, A. E.; Eckelkamp, R. E.; Kelly, C. M.; Mccandless, W.; Rue, D. L.

    1990-01-01

    The objective of an operations management system is to provide an orderly and efficient method to operate and maintain aerospace vehicles. Concepts are described for an operations management system and the key technologies are highlighted which will be required if this capability is brought to fruition. Without this automation and decision aiding capability, the growing complexity of avionics will result in an unmanageable workload for the operator, ultimately threatening mission success or survivability of the aircraft or space system. The key technologies include expert system application to operational tasks such as replanning, equipment diagnostics and checkout, global system management, and advanced man machine interfaces. The economical development of operations management systems, which are largely software, will require advancements in other technological areas such as software engineering and computer hardware.

  3. Operative fetoscopy via telesurgery.

    PubMed

    Quintero, R A; Muñoz, H; Pommer, R; Diaz, C; Bornick, P W; Allen, M H

    2002-10-01

    We describe a case in which telesurgical consultation from Tampa, Florida, USA was used to accomplish operative fetoscopy in Santiago, Chile for the treatment of a twin pregnancy involving an acardiac twin. The procedure was successful and a healthy infant was delivered at 37.5 weeks. Operative fetoscopy, a surgical approach to correct birth defects in utero via combined ultrasound and endoscopy, is only available in a handful of centers worldwide. Telesurgery makes use of telecommunication to allow a surgeon at a primary operating site to consult with another experienced surgeon for complex surgical cases. This case illustrates the potential for ultrasound and telesurgery to expand the horizons of operative fetoscopy.

  4. Operator interface for vehicles

    SciTech Connect

    Bissontz, Jay E

    2015-03-10

    A control interface for drivetrain braking provided by a regenerative brake and a non-regenerative brake is implemented using a combination of switches and graphic interface elements. The control interface comprises a control system for allocating drivetrain braking effort between the regenerative brake and the non-regenerative brake, a first operator actuated control for enabling operation of the drivetrain braking, and a second operator actuated control for selecting a target braking effort for drivetrain braking. A graphic display displays to an operator the selected target braking effort and can be used to further display actual braking effort achieved by drivetrain braking.

  5. Managing nuclear operations

    SciTech Connect

    Carter, A.B.; Steinbruner, J.D.; Zraket, C.A.

    1987-01-01

    This book seeks to remedy the neglect of nuclear operations as a major flaw in the prevailing understanding of security. It aims to make the operational terrain at least more familiar if not much firmer. It describes the instruments involved in nuclear operations - the sensors, communications links, and command centers that form the physical network as well as the plans, procedures, organizations, and widely shared assumptions that allow the parts to work together coherently. The book as a whole seeks more to pose fundamental issues of operations management than to give definitive answers. It promotes no particular policy and makes no recommendations.

  6. Operational safety reliability research

    SciTech Connect

    Hall, R.E.; Boccio, J.L.

    1986-01-01

    Operating reactor events such as the TMI accident and the Salem automatic-trip failures raised the concern that during a plant's operating lifetime the reliability of systems could degrade from the design level that was considered in the licensing process. To address this concern, NRC is sponsoring the Operational Safety Reliability Research project. The objectives of this project are to identify the essential tasks of a reliability program and to evaluate the effectiveness and attributes of such a reliability program applicable to maintaining an acceptable level of safety during the operating lifetime at the plant.

  7. Crane and Excavator Operator.

    ERIC Educational Resources Information Center

    Marine Corps Inst., Washington, DC.

    Developed as part of the Marine Corps Institute (MCI) correspondence training program, this course on crane and excavator operation is designed to enable the crane and excavator operator to perform his/her duties more proficiently. Introductory materials include specific information for MCI students, a course introduction, and a study guide…

  8. Conformal operators in QCD

    SciTech Connect

    Makeenko, Y.M.

    1981-03-01

    Utilizing the properties of the representations of the conformal group, we obtain new expressions for the conformal operators composed of spinor or scalar fields of arbitrary dimension in terms of Jacobi polynomials. These expressions generalize the known formulas in terms of Gegenbauer polynomials. Using the conformal Ward identities, we prove the multiplicative renormalizability of conformal operators in the leading logarithmic approximation.

  9. Waterworks Operator Training Manual.

    ERIC Educational Resources Information Center

    Missouri Univ., Columbia. Instructional Materials Lab.

    Sixteen self-study waterworks operators training modules are provided. Module titles are the following: basic mathematics, basic chemistry, analysis procedures, microbiology, basic electricity, hydraulics, chlorination, plant operation, surface water, ground water, pumps, cross connections, distribution systems, safety, public relations, and…

  10. Automated radio astronomy operations

    NASA Technical Reports Server (NTRS)

    Livermore, R. W.

    1978-01-01

    The improvements in using a computer to drive a DSN 64-meter antenna are described. The development is used to simplify operation, improve antenna safety, reduce antenna wear, present the abuse of antenna by misoperation, increase quantity and quality of data gathered, and give users a greater choice of automatic operations.

  11. Nuclear Powerplant Safety: Operations.

    ERIC Educational Resources Information Center

    Department of Energy, Washington, DC. Nuclear Energy Office.

    Powerplant systems and procedures that ensure the day-to-day health and safety of people in and around the plant is referred to as operational safety. This safety is the result of careful planning, good engineering and design, strict licensing and regulation, and environmental monitoring. Procedures that assure operational safety at nuclear…

  12. Custodial Operations: Green & Sustainable

    ERIC Educational Resources Information Center

    Campbell, J. Kirk

    2008-01-01

    Custodial Operations can have a significant impact on institutional green and sustainable goals if given the proper support and challenge. This article describes the green and sustainable custodial operations in place at Carleton College in Northfield, Minnesota. The article reviews the college's sustainable efforts on biodegradables, packaging,…

  13. Video Telescope Operating Microscopy.

    PubMed

    Divers, Stephen J

    2015-09-01

    Exotic pet veterinarians frequently have to operate on small animals, and magnification is commonly used. Existing endoscopy equipment can be used with a mechanical arm and telescope to enable video telescope operating microscopy. The additional equipment items and their specifics are described, and several case examples are provided. PMID:26117519

  14. CITY III Operator's Manual.

    ERIC Educational Resources Information Center

    Envirometrics, Inc., Washington, DC.

    CITY III is a computer-assisted simulation game of an urban system involving player operation of and interaction with economic, social, and government components. The role of operator in the game is to take the handwritten inputs (decisions) from the CITY III participants, process them, and return output which initiates the next round of…

  15. Shared mission operations concept

    NASA Technical Reports Server (NTRS)

    Spradlin, Gary L.; Rudd, Richard P.; Linick, Susan H.

    1994-01-01

    Historically, new JPL flight projects have developed a Mission Operations System (MOS) as unique as their spacecraft, and have utilized a mission-dedicated staff to monitor and control the spacecraft through the MOS. NASA budgetary pressures to reduce mission operations costs have led to the development and reliance on multimission ground system capabilities. The use of these multimission capabilities has not eliminated an ongoing requirement for a nucleus of personnel familiar with a given spacecraft and its mission to perform mission-dedicated operations. The high cost of skilled personnel required to support projects with diverse mission objectives has the potential for significant reduction through shared mission operations among mission-compatible projects. Shared mission operations are feasible if: (1) the missions do not conflict with one another in terms of peak activity periods, (2) a unique MOS is not required, and (3) there is sufficient similarity in the mission profiles so that greatly different skills would not be required to support each mission. This paper will further develop this shared mission operations concept. We will illustrate how a Discovery-class mission would enter a 'partner' relationship with the Voyager Project, and can minimize MOS development and operations costs by early and careful consideration of mission operations requirements.

  16. STARPAHC operational report

    NASA Technical Reports Server (NTRS)

    1977-01-01

    The results of the first one and one-half years of operation of the STARPAHC system are presented. An operational cost summary analysis is included as well as the following; (1) Medical evaluation results, (2) system usage, and (3) hardware evaluation results.

  17. Basic Sewage Treatment Operation.

    ERIC Educational Resources Information Center

    Ontario Ministry of the Environment, Toronto.

    This manual was developed for use at workshops designed to introduce operators to the fundamentals of sewage plant operation. The course consists of lecture-discussions and hands-on activities. Each of the lessons has clearly stated behavioral objectives to tell the trainee what he should know or do after completing that topic. Areas covered in…

  18. Operation: Save Aunt Sally

    ERIC Educational Resources Information Center

    Zorin, Barbara; Carver, David, Jr.

    2015-01-01

    In grade 6, students should be able to "perform arithmetic operations, including those involving whole-number exponents, in the conventional order when there are no parentheses to specify a particular order" (p. 44). In grades 7 and 8, the rules of order of operations are used to simplify progressively complicated expressions and in…

  19. Mission Operations Assurance

    NASA Technical Reports Server (NTRS)

    Faris, Grant

    2012-01-01

    Integrate the mission operations assurance function into the flight team providing: (1) value added support in identifying, mitigating, and communicating the project's risks and, (2) being an essential member of the team during the test activities, training exercises and critical flight operations.

  20. Equipment Operator 1 & C.

    ERIC Educational Resources Information Center

    Naval Education and Training Program Development Center, Pensacola, FL.

    The Rate Training Manual and Nonresident Career Course (RTM/NRCC) form a self-study package to assist Navy Equipment Operators First and Chief in fulfilling the requirements of their rating. (Navy Equipment Operators First and Chief direct and coordinate efforts of individuals and crews in construction, earthmoving, roadbuilding, quarrying, and…

  1. Video Telescope Operating Microscopy.

    PubMed

    Divers, Stephen J

    2015-09-01

    Exotic pet veterinarians frequently have to operate on small animals, and magnification is commonly used. Existing endoscopy equipment can be used with a mechanical arm and telescope to enable video telescope operating microscopy. The additional equipment items and their specifics are described, and several case examples are provided.

  2. Stirling machine operating experience

    NASA Technical Reports Server (NTRS)

    Ross, Brad; Dudenhoefer, James E.

    1991-01-01

    Numerous Stirling machines have been built and operated, but the operating experience of these machines is not well known. It is important to examine this operating experience in detail, because it largely substantiates the claim that Stirling machines are capable of reliable and lengthy lives. The amount of data that exists is impressive, considering that many of the machines that have been built are developmental machines intended to show proof of concept, and were not expected to operate for any lengthy period of time. Some Stirling machines (typically free-piston machines) achieve long life through non-contact bearings, while other Stirling machines (typically kinematic) have achieved long operating lives through regular seal and bearing replacements. In addition to engine and system testing, life testing of critical components is also considered.

  3. Aircraft operations management manual

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The NASA aircraft operations program is a multifaceted, highly diverse entity that directly supports the agency mission in aeronautical research and development, space science and applications, space flight, astronaut readiness training, and related activities through research and development, program support, and mission management aircraft operations flights. Users of the program are interagency, inter-government, international, and the business community. This manual provides guidelines to establish policy for the management of NASA aircraft resources, aircraft operations, and related matters. This policy is an integral part of and must be followed when establishing field installation policy and procedures covering the management of NASA aircraft operations. Each operating location will develop appropriate local procedures that conform with the requirements of this handbook. This manual should be used in conjunction with other governing instructions, handbooks, and manuals.

  4. Visions image operating system

    SciTech Connect

    Kohler, R.R.; Hanson, A.R.

    1982-01-01

    The image operating system is a complete software environment specifically designed for dynamic experimentation in scene analysis. The IOS consists of a high-level interpretive control language (LISP) with efficient image operators in a noninterpretive language. The image operators are viewed as local operators to be applied in parallel at all pixels to a set of input images. In order to carry out complex image analysis experiments an environment conducive to such experimentation was needed. This environment is provided by the visions image operating system based on a computational structure known as a processing cone proposed by Hanson and Riseman (1974, 1980) and implemented on a VAX-11/780 running VMS. 6 references.

  5. Integrated formal operations plan

    SciTech Connect

    Cort, G.; Dearholt, W.; Donahue, S.; Frank, J.; Perkins, B.; Tyler, R.; Wrye, J.

    1994-01-05

    The concept of formal operations (that is, a collection of business practices to assure effective, accountable operations) has vexed the Laboratory for many years. To date most attempts at developing such programs have been based upon rigid, compliance-based interpretations of a veritable mountain of Department of Energy (DOE) orders, directives, notices, and standards. These DOE dictates seldom take the broad view but focus on highly specialized programs isolated from the overall context of formal operations. The result is a confusing array of specific, and often contradictory, requirements that produce a patchwork of overlapping niche programs. This unnecessary duplication wastes precious resources, dramatically increases the complexity of our work processes, and communicates a sense of confusion to our customers and regulators. Coupled with the artificial divisions that have historically existed among the Laboratory`s formal operations organizations (quality assurance, configuration management, records management, training, etc.), this approach has produced layers of increasingly vague and complex formal operations plans, each of which interprets its parent and adds additional requirements of its own. Organizational gridlock ensues whenever an activity attempts to implement these bureaucratic monstrosities. The integrated formal operations plan presented is to establish a set of requirements that must be met by an integrated formal operations program, assign responsibilities for implementation and operation of the program, and specify criteria against which the performance of the program will be measured. The accountable line manager specifies the items, processes, and information (the controlled elements) to which the formal operations program specified applies. The formal operations program is implemented using a graded approach based on the level of importance of the various controlled elements and the scope of the activities in which they are involved.

  6. CAM operated fuel valve

    SciTech Connect

    Kelly, S.T.; Katchka, J.R.

    1991-09-03

    This patent describes improvement in a fuel control valve construction comprising a housing means having an inlet means adapted to be interconnected to a fuel source and a main outlet means adapted to be interconnected to a main burner means, the housing means having a main valve seat for interconnecting the inlet means with the main outlet means, the housing means having a movable main valve member for opening and closing the main valve seat, the housing means having a movable lever operatively associated with the main valve member and having a manually operable actuator means for controlling the operating positions of the lever, the lever having an intermediate cam follower portion and opposed ends disposed on each side of the cam follower portion with one end of the opposed ends being pivotally mounted to the housing means and with the other end of the opposed ends for operating the main valve member, the housing means having biasing means operatively interconnected to the lever to tend to pivot the lever in one direction that opens the main valve member away from its the main valve seat. The improvement comprises; the housing means has a thermostatically controlled means that is operatively associated with the lever and is adapted to engage and hold the lever in a position wherein the main valve member is in a closed condition against its the main valve seat when the thermostatically controlled means is in one operating condition thereof and the actuator means is in the on condition thereof.

  7. Stirling machine operating experience

    SciTech Connect

    Ross, B.; Dudenhoefer, J.E.

    1994-09-01

    Numerous Stirling machines have been built and operated, but the operating experience of these machines is not well known. It is important to examine this operating experience in detail, because it largely substantiates the claim that stirling machines are capable of reliable and lengthy operating lives. The amount of data that exists is impressive, considering that many of the machines that have been built are developmental machines intended to show proof of concept, and are not expected to operate for lengthy periods of time. Some Stirling machines (typically free-piston machines) achieve long life through non-contact bearings, while other Stirling machines (typically kinematic) have achieved long operating lives through regular seal and bearing replacements. In addition to engine and system testing, life testing of critical components is also considered. The record in this paper is not complete, due to the reluctance of some organizations to release operational data and because several organizations were not contacted. The authors intend to repeat this assessment in three years, hoping for even greater participation.

  8. NSI operations center

    NASA Technical Reports Server (NTRS)

    Zanley, Nancy L.

    1991-01-01

    The NASA Science Internet (NSI) Network Operations Staff is responsible for providing reliable communication connectivity for the NASA science community. As the NSI user community expands, so does the demand for greater interoperability with users and resources on other networks (e.g., NSFnet, ESnet), both nationally and internationally. Coupled with the science community's demand for greater access to other resources is the demand for more reliable communication connectivity. Recognizing this, the NASA Science Internet Project Office (NSIPO) expands its Operations activities. By January 1990, Network Operations was equipped with a telephone hotline, and its staff was expanded to six Network Operations Analysts. These six analysts provide 24-hour-a-day, 7-day-a-week coverage to assist site managers with problem determination and resolution. The NSI Operations staff monitors network circuits and their associated routers. In most instances, NSI Operations diagnoses and reports problems before users realize a problem exists. Monitoring of the NSI TCP/IP Network is currently being done with Proteon's Overview monitoring system. The Overview monitoring system displays a map of the NSI network utilizing various colors to indicate the conditions of the components being monitored. Each node or site is polled via the Simple Network Monitoring Protocol (SNMP). If a circuit goes down, Overview alerts the Network Operations staff with an audible alarm and changes the color of the component. When an alert is received, Network Operations personnel immediately verify and diagnose the problem, coordinate repair with other networking service groups, track problems, and document problem and resolution into a trouble ticket data base. NSI Operations offers the NSI science community reliable connectivity by exercising prompt assessment and resolution of network problems.

  9. Operations and maintenance manual for the LDUA operations control trailer

    SciTech Connect

    Clark, D.A.

    1996-08-06

    The Light Duty Utility Arm (LDUA) Operations Control Trailer has completed testing and is ready for operation. This document defines the requirements applicable to the operation and maintenance of the Operations Control Trailer.

  10. Estimating airline operating costs

    NASA Technical Reports Server (NTRS)

    Maddalon, D. V.

    1978-01-01

    A review was made of the factors affecting commercial aircraft operating and delay costs. From this work, an airline operating cost model was developed which includes a method for estimating the labor and material costs of individual airframe maintenance systems. The model, similar in some respects to the standard Air Transport Association of America (ATA) Direct Operating Cost Model, permits estimates of aircraft-related costs not now included in the standard ATA model (e.g., aircraft service, landing fees, flight attendants, and control fees). A study of the cost of aircraft delay was also made and a method for estimating the cost of certain types of airline delay is described.

  11. Quantum Operation Time Reversal

    SciTech Connect

    Crooks, Gavin E.

    2008-03-25

    The dynamics of an open quantum system can be described by a quantum operation: A linear, complete positive map of operators. Here, I exhibit a compact expression for the time reversal of a quantum operation, which is closely analogous to the time reversal of a classical Markov transition matrix. Since open quantum dynamics are stochastic, and not, in general, deterministic, the time reversal is not, in general, an inversion of the dynamics. Rather, the system relaxes toward equilibrium in both the forward and reverse time directions. The probability of a quantum trajectory and the conjugate, time reversed trajectory are related by the heat exchanged with the environment.

  12. Operator Certification Study Guide.

    ERIC Educational Resources Information Center

    American Water Works Association, Denver, CO.

    This study guide contains typical questions and answers that all levels of water treatment plant operators might expect to find on a certification examination. The manual covers the basic sciences, treatment techniques, testing procedures, and federal legislation. (Author/SB)

  13. Reduction/Transformation Operators

    2006-09-01

    RTOp (reduction/transformation operators) is a collection of C++ software that provides the basic mechanism for implementinig vector operations in a flexible and efficient manner. This is the main interface utilized by Thyra to allow for the specification of specific vector reduction and/or transformation operations. The RTOp package contains three different types of software. (a) a small number of interoperability interfaces. (b) support software including code for the parallel SPMD mode based on only Teuchos::Comm(and notmore » MPl directly(, and (c) a library of pre-implemented RTOp subclasses for everything from simple AXPYs and norms, to more specialized vector operations. RTOp allows an algorithm developer to implement their own RTOp subclasses in a way that is independent from any specific serial, parallel, out-of-core or other type of vector implementation. RTOp is a required package by Thyra and MOOCHO. (c)« less

  14. Operant Conditioning and Education.

    ERIC Educational Resources Information Center

    de Noronha, Mario

    A case study of a learning disabled 8-year-old with behavior disturbancs is presented to highlight the use of operant conditioning in cutting down educational costs and easing the teacher's class management problems. (CL)

  15. Operating plan FY 1998

    SciTech Connect

    1997-10-01

    This document is the first edition of Argonne`s new Operating Plan. The Operating Plan complements the strategic planning in the Laboratory`s Institutional Plan by focusing on activities that are being pursued in the immediate fiscal year, FY 1998. It reflects planning that has been done to date, and it will serve in the future as a resource and a benchmark for understanding the Laboratory`s performance. The heart of the Institutional Plan is the set of major research initiatives that the Laboratory is proposing to implement in future years. In contrast, this Operating Plan focuses on Argonne`s ongoing R&D programs, along with cost-saving measures and other improvements being implemented in Laboratory support operations.

  16. THOR Science Operations

    NASA Astrophysics Data System (ADS)

    Khotyaintsev, Yuri; Vaivads, Andris; Osuna, Pedro; Walsh, Andrew; Gehler, Martin; Escoubet, Philippe

    2016-04-01

    The science operations concept of THOR is based on further development of accumulated expertise operating and running the ongoing missions such as Cluster and MMS, as well as on planning of the future missions such as Solar Orbiter and JUICE. In the core of the THOR science operations is the selective downlink capability that will allow maximizing the science return by downloading the high-resolution data only from selected intervals along the orbit. Such an approach requires tight collaboration between the data processing and calibration, as well as data archiving. Here we discuss the critical parts of the THOR science operations, what are improvements in comparison to earlier missions, and how this will lead to increased scientific output from the mission.

  17. Enabler operator station

    NASA Technical Reports Server (NTRS)

    Bailey, Andrea; Kietzman, John; King, Shirlyn; Stover, Rae; Wegner, Torsten

    1992-01-01

    The objective of this project was to design an onboard operator station for the conceptual Lunar Work Vehicle (LWV). The LWV would be used in the colonization of a lunar outpost. The details that follow, however, are for an Earth-bound model. The operator station is designed to be dimensionally correct for an astronaut wearing the current space shuttle EVA suit (which include life support). The proposed operator station will support and restrain an astronaut as well as to provide protection from the hazards of vehicle rollover. The threat of suit puncture is eliminated by rounding all corners and edges. A step-plate, located at the front of the vehicle, provides excellent ease of entry and exit. The operator station weight requirements are met by making efficient use of rigid members, semi-rigid members, and woven fabrics.

  18. LCOGT network observatory operations

    NASA Astrophysics Data System (ADS)

    Pickles, Andrew; Hjelstrom, Annie; Boroson, Todd; Burleson, Ben; Conway, Patrick; De Vera, Jon; Elphick, Mark; Haworth, Brian; Rosing, Wayne; Saunders, Eric; Thomas, Doug; White, Gary; Willis, Mark; Walker, Zach

    2014-08-01

    We describe the operational capabilities of the Las Cumbres Observatory Global Telescope Network. We summarize our hardware and software for maintaining and monitoring network health. We focus on methodologies to utilize the automated system to monitor availability of sites, instruments and telescopes, to monitor performance, permit automatic recovery, and provide automatic error reporting. The same jTCS control system is used on telescopes of apertures 0.4m, 0.8m, 1m and 2m, and for multiple instruments on each. We describe our network operational model, including workloads, and illustrate our current tools, and operational performance indicators, including telemetry and metrics reporting from on-site reductions. The system was conceived and designed to establish effective, reliable autonomous operations, with automatic monitoring and recovery - minimizing human intervention while maintaining quality. We illustrate how far we have been able to achieve that.

  19. CALIPSO Instrument Operational

    Atmospheric Science Data Center

    2014-09-18

    CALIPSO Instrument Operational Thursday, September 11, 2014 The CALIPSO payload is back in data acquisition mode as of Wednesday, September 17, 2014.  CALIPSO data processing has returned to a nominal state, and...

  20. Nuclear material operations manual

    SciTech Connect

    Tyler, R.P.

    1981-02-01

    This manual provides a concise and comprehensive documentation of the operating procedures currently practiced at Sandia National Laboratories with regard to the management, control, and accountability of nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion.

  1. Operator roles in robotics

    SciTech Connect

    Lyman, J.; Madni, A.M.

    1984-01-01

    The authors suggest that operator roles in robotics can be classified under the categories of monitor, manager, and maintainer. With increasingly sophisticated applications of machine intelligence, however, these roles will require explicit and continuing reassessment. 5 references.

  2. CH Packaging Operations Manual

    SciTech Connect

    Washington TRU Solutions LLC

    2005-06-13

    This procedure provides instructions for assembling the CH Packaging Drum payload assembly, Standard Waste Box (SWB) assembly, Abnormal Operations and ICV and OCV Preshipment Leakage Rate Tests on the packaging seals, using a nondestructive Helium (He) Leak Test.

  3. Space Medicine Medical Operations

    NASA Video Gallery

    This is an overview of the Space and Clinical Operations Division whose mission is to optimize the health, fitness and well-being of flight crews, their dependents and employees of the Johnson Spac...

  4. Versados (operating system)

    SciTech Connect

    Glaser, J.G.

    1981-01-01

    Versados is a multitasking operation system designed to meet the requirements of the real-time, online control system environment as well as to support the multiuser software-hardware engineering effort required to develop microprocessor based systems. Versados serves as a major software building block for real-time applications which use the Motorola MC68000 microprocessor and Versamodule board products. It is a modular, multilayered operating system.

  5. Estimating Airline Operating Costs

    NASA Technical Reports Server (NTRS)

    Maddalon, D. V.

    1978-01-01

    The factors affecting commercial aircraft operating and delay costs were used to develop an airline operating cost model which includes a method for estimating the labor and material costs of individual airframe maintenance systems. The model permits estimates of aircraft related costs, i.e., aircraft service, landing fees, flight attendants, and control fees. A method for estimating the costs of certain types of airline delay is also described.

  6. Transforming Power Grid Operations

    SciTech Connect

    Huang, Zhenyu; Guttromson, Ross T.; Nieplocha, Jarek; Pratt, Robert G.

    2007-04-15

    While computation is used to plan, monitor, and control power grids, some of the computational technologies now used are more than a hundred years old, and the complex interactions of power grid components impede real-time operations. Thus it is hard to speed up “state estimation,” the procedure used to estimate the status of the power grid from measured input. State estimation is the core of grid operations, including contingency analysis, automatic generation control, and optimal power flow. How fast state estimation and contingency analysis are conducted (currently about every 5 minutes) needs to be increased radically so the analysis of contingencies is comprehensive and is conducted in real time. Further, traditional state estimation is based on a power flow model and only provides a static snapshot—a tiny piece of the state of a large-scale dynamic machine. Bringing dynamic aspects into real-time grid operations poses an even bigger challenge. Working with the latest, most advanced computing techniques and hardware, researchers at Pacific Northwest National Laboratory (PNNL) intend to transform grid operations by increasing computational speed and improving accuracy. Traditional power grid computation is conducted on single PC hardware platforms. This article shows how traditional power grid computation can be reformulated to take advantage of advanced computing techniques and be converted to high-performance computing platforms (e.g., PC clusters, reconfigurable hardware, scalable multicore shared memory computers, or multithreaded architectures). The improved performance is expected to have a huge impact on how power grids are operated and managed and ultimately will lead to more reliability and better asset utilization to the power industry. New computational capabilities will be tested and demonstrated on the comprehensive grid operations platform in the Electricity Infrastructure Operations Center, which is a newly commissioned PNNL facility for

  7. Operational waste volume projection

    SciTech Connect

    Koreski, G.M.; Strode, J.N.

    1995-06-01

    Waste receipts to the double-shell tank system are analyzed and wastes through the year 2015 are projected based on generation trends of the past 12 months. A computer simulation of site operations is performed, which results in projections of tank fill schedules, tank transfers, evaporator operations, tank retrieval, and aging waste tank usage. This projection incorporates current budget planning and the clean-up schedule of the tri-party agreement. Assumptions are current as of June 1995.

  8. Operational waste volume projection

    SciTech Connect

    Koreski, G.M.

    1996-09-20

    Waste receipts to the double-shell tank system are analyzed and wastes through the year 2015 are projected based on generation trends of the past 12 months. A computer simulation of site operations is performed, which results in projections of tank fill schedules, tank transfers, evaporator operations, tank retrieval, and aging waste tank usage. This projection incorporates current budget planning and the clean-up schedule of the Tri-Party Agreement. Assumptions were current as of June 1996.

  9. Operational Waste Volume Projection

    SciTech Connect

    STRODE, J.N.

    1999-08-24

    Waste receipts to the double-shell tank system are analyzed and wastes through the year 2018 are projected based on assumption as of July 1999. A computer simulation of site operations is performed, which results in projections of tank fill schedules, tank transfers, evaporator operations, tank retrieval, and aging waste tank usage. This projection incorporates current budget planning and the clean-up schedule of the Tri-Party Agreement.

  10. Commercialization in NASA Space Operations

    NASA Technical Reports Server (NTRS)

    Gilbert, Charlene E.

    1998-01-01

    Various issues associated with commercialization in NASA space operations are presented in viewgraph form. Specific topics include: 1) NASA's financial outlook; 2) Space operations; 3) Space operations technology; and 4) Strategies associated with these operations.

  11. Operational Dynamic Configuration Analysis

    NASA Technical Reports Server (NTRS)

    Lai, Chok Fung; Zelinski, Shannon

    2010-01-01

    Sectors may combine or split within areas of specialization in response to changing traffic patterns. This method of managing capacity and controller workload could be made more flexible by dynamically modifying sector boundaries. Much work has been done on methods for dynamically creating new sector boundaries [1-5]. Many assessments of dynamic configuration methods assume the current day baseline configuration remains fixed [6-7]. A challenging question is how to select a dynamic configuration baseline to assess potential benefits of proposed dynamic configuration concepts. Bloem used operational sector reconfigurations as a baseline [8]. The main difficulty is that operational reconfiguration data is noisy. Reconfigurations often occur frequently to accommodate staff training or breaks, or to complete a more complicated reconfiguration through a rapid sequence of simpler reconfigurations. Gupta quantified a few aspects of airspace boundary changes from this data [9]. Most of these metrics are unique to sector combining operations and not applicable to more flexible dynamic configuration concepts. To better understand what sort of reconfigurations are acceptable or beneficial, more configuration change metrics should be developed and their distribution in current practice should be computed. This paper proposes a method to select a simple sequence of configurations among operational configurations to serve as a dynamic configuration baseline for future dynamic configuration concept assessments. New configuration change metrics are applied to the operational data to establish current day thresholds for these metrics. These thresholds are then corroborated, refined, or dismissed based on airspace practitioner feedback. The dynamic configuration baseline selection method uses a k-means clustering algorithm to select the sequence of configurations and trigger times from a given day of operational sector combination data. The clustering algorithm selects a simplified

  12. Radioastron flight operations

    NASA Technical Reports Server (NTRS)

    Altunin, V. I.; Sukhanov, K. G.; Altunin, K. R.

    1993-01-01

    Radioastron is a space-based very-long-baseline interferometry (VLBI) mission to be operational in the mid-90's. The spacecraft and space radio telescope (SRT) will be designed, manufactured, and launched by the Russians. The United States is constructing a DSN subnet to be used in conjunction with a Russian subnet for Radioastron SRT science data acquisition, phase link, and spacecraft and science payload health monitoring. Command and control will be performed from a Russian tracking facility. In addition to the flight element, the network of ground radio telescopes which will be performing co-observations with the space telescope are essential to the mission. Observatories in 39 locations around the world are expected to participate in the mission. Some aspects of the mission that have helped shaped the flight operations concept are: separate radio channels will be provided for spacecraft operations and for phase link and science data acquisition; 80-90 percent of the spacecraft operational time will be spent in an autonomous mode; and, mission scheduling must take into account not only spacecraft and science payload constraints, but tracking station and ground observatory availability as well. This paper will describe the flight operations system design for translating the Radioastron science program into spacecraft executed events. Planning for in-orbit checkout and contingency response will also be discussed.

  13. Autonomous mission operations

    NASA Astrophysics Data System (ADS)

    Frank, J.; Spirkovska, L.; McCann, R.; Wang, Lui; Pohlkamp, K.; Morin, L.

    NASA's Advanced Exploration Systems Autonomous Mission Operations (AMO) project conducted an empirical investigation of the impact of time delay on today's mission operations, and of the effect of processes and mission support tools designed to mitigate time-delay related impacts. Mission operation scenarios were designed for NASA's Deep Space Habitat (DSH), an analog spacecraft habitat, covering a range of activities including nominal objectives, DSH system failures, and crew medical emergencies. The scenarios were simulated at time delay values representative of Lunar (1.2-5 sec), Near Earth Object (NEO) (50 sec) and Mars (300 sec) missions. Each combination of operational scenario and time delay was tested in a Baseline configuration, designed to reflect present-day operations of the International Space Station, and a Mitigation configuration in which a variety of software tools, information displays, and crew-ground communications protocols were employed to assist both crews and Flight Control Team (FCT) members with the long-delay conditions. Preliminary findings indicate: 1) Workload of both crewmembers and FCT members generally increased along with increasing time delay. 2) Advanced procedure execution viewers, caution and warning tools, and communications protocols such as text messaging decreased the workload of both flight controllers and crew, and decreased the difficulty of coordinating activities. 3) Whereas crew workload ratings increased between 50 sec and 300 sec of time delay in the Baseline configuration, workload ratings decreased (or remained flat) in the Mitigation configuration.

  14. Purposive discovery of operations

    NASA Technical Reports Server (NTRS)

    Sims, Michael H.; Bresina, John L.

    1992-01-01

    The Generate, Prune & Prove (GPP) methodology for discovering definitions of mathematical operators is introduced. GPP is a task within the IL exploration discovery system. We developed GPP for use in the discovery of mathematical operators with a wider class of representations than was possible with the previous methods by Lenat and by Shen. GPP utilizes the purpose for which an operator is created to prune the possible definitions. The relevant search spaces are immense and there exists insufficient information for a complete evaluation of the purpose constraint, so it is necessary to perform a partial evaluation of the purpose (i.e., pruning) constraint. The constraint is first transformed so that it is operational with respect to the partial information, and then it is applied to examples in order to test the generated candidates for an operator's definition. In the GPP process, once a candidate definition survives this empirical prune, it is passed on to a theorem prover for formal verification. We describe the application of this methodology to the (re)discovery of the definition of multiplication for Conway numbers, a discovery which is difficult for human mathematicians. We successfully model this discovery process utilizing information which was reasonably available at the time of Conway's original discovery. As part of this discovery process, we reduce the size of the search space from a computationally intractable size to 3468 elements.

  15. About APPLE II Operation

    SciTech Connect

    Schmidt, T.; Zimoch, D.

    2007-01-19

    The operation of an APPLE II based undulator beamline with all its polarization states (linear horizontal and vertical, circular and elliptical, and continous variation of the linear vector) requires an effective description allowing an automated calculation of gap and shift parameter as function of energy and operation mode. The extension of the linear polarization range from 0 to 180 deg. requires 4 shiftable magnet arrrays, permitting use of the APU (adjustable phase undulator) concept. Studies for a pure fixed gap APPLE II for the SLS revealed surprising symmetries between circular and linear polarization modes allowing for simplified operation. A semi-analytical model covering all types of APPLE II and its implementation will be presented.

  16. Payload operation television system

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The TV system assembled is intended for laboratory experimentation which would develop operational techniques and lead to the design of space-borne TV equipment whose purpose would be to assist the astronaut-operator aboard a space station to load payload components. The TV system assembled for this program is a black and white, monocular, high performance system. The equipment consists principally of a good quality TV camera capable of high resolving power; a TV monitor; a sync generator for driving camera and monitor; and two pan/tilt units which are remotely controlled by the operator. One pan/tilt unit provides control of the pointing of the camera, the other similarly controls the position of a simulated payload.

  17. About APPLE II Operation

    NASA Astrophysics Data System (ADS)

    Schmidt, T.; Zimoch, D.

    2007-01-01

    The operation of an APPLE II based undulator beamline with all its polarization states (linear horizontal and vertical, circular and elliptical, and continous variation of the linear vector) requires an effective description allowing an automated calculation of gap and shift parameter as function of energy and operation mode. The extension of the linear polarization range from 0 to 180° requires 4 shiftable magnet arrrays, permitting use of the APU (adjustable phase undulator) concept. Studies for a pure fixed gap APPLE II for the SLS revealed surprising symmetries between circular and linear polarization modes allowing for simplified operation. A semi-analytical model covering all types of APPLE II and its implementation will be presented.

  18. Achieving TASAR Operational Readiness

    NASA Technical Reports Server (NTRS)

    Wing, David J.

    2015-01-01

    NASA has been developing and testing the Traffic Aware Strategic Aircrew Requests (TASAR) concept for aircraft operations featuring a NASA-developed cockpit automation tool, the Traffic Aware Planner (TAP), which computes traffic/hazard-compatible route changes to improve flight efficiency. The TAP technology is anticipated to save fuel and flight time and thereby provide immediate and pervasive benefits to the aircraft operator, as well as improving flight schedule compliance, passenger comfort, and pilot and controller workload. Previous work has indicated the potential for significant benefits for TASAR-equipped aircraft, and a flight trial of the TAP software application in the National Airspace System has demonstrated its technical viability. This paper reviews previous and ongoing activities to prepare TASAR for operational use.

  19. SSCL Commissioning and Operations

    SciTech Connect

    1992-03-31

    The SSC, with an energy of 20 TeV/Beam, requires a sequence of individual accelerators of increasing energy in the injector chain. These are the Linac, Low Energy Booster, Medium Energy Booster, and High Energy Booster. Each accelerator system must be completed in sequence in order to provide beam to the next higher energy accelerator. The collider itself is comprised of ten sectors, each of which in terms of superconducting magnet bending strength, is equivalent to two HEB injectors. The completion of all injectors and collider sectors is required before stored beams can circulate in preparation for colliding beam operation. Four experimental halls are planned for the detector systems. Each major detector will be assembled in one of the halls by a world-wide collaboration of scientists. In addition, above ground facilities provide shops and test facilities for accelerator technical systems, superconducting magnet and materials research and development, and for detector assembly and operations. The purpose of this report is to present a plan for the sequential commissioning and operation of these individual accelerators and other technical facilities of the SSC. A central objective of this plan is to describe the activities at the SSCL that are not included as part of the construction project TPC, even though they occur during the overall project construction time-frame. Examples of such activities include the operation of general laboratory facilities and services not specifically related to construction, the operating costs for the individual accelerators in the injector chain once these facilities have been commissioned, and the costs of SSCL physics research groups. The Department of Energy has provided the following decision with regard to these operations categories for the SSCL.

  20. Internet Based Remote Operations

    NASA Technical Reports Server (NTRS)

    Chamberlain, James

    1999-01-01

    This is the Final Report for the Internet Based Remote Operations Contract, has performed payload operations research support tasks March 1999 through September 1999. These tasks support the GSD goal of developing a secure, inexpensive data, voice, and video mission communications capability between remote payload investigators and the NASA payload operations team in the International Space Station (ISS) era. AZTek has provided feedback from the NASA payload community by utilizing its extensive payload development and operations experience to test and evaluate remote payload operations systems. AZTek has focused on use of the "public Internet" and inexpensive, Commercial-off-the-shelf (COTS) Internet-based tools that would most benefit "small" (e.g., $2 Million or less) payloads and small developers without permanent remote operations facilities. Such projects have limited budgets to support installation and development of high-speed dedicated communications links and high-end, custom ground support equipment and software. The primary conclusions of the study are as follows: (1) The trend of using Internet technology for "live" collaborative applications such as telescience will continue. The GSD-developed data and voice capabilities continued to work well over the "public" Internet during this period. 2. Transmitting multiple voice streams from a voice-conferencing server to a client PC to be mixed and played on the PC is feasible. 3. There are two classes of voice vendors in the market: - Large traditional phone equipment vendors pursuing integration of PSTN with Internet, and Small Internet startups.The key to selecting a vendor will be to find a company sufficiently large and established to provide a base voice-conferencing software product line for the next several years.

  1. The operator's emotional stability

    NASA Technical Reports Server (NTRS)

    Zilberman, P. B.

    1975-01-01

    An attempt is made to provide a psychological interpretation of the concept of emotional stability in connection with other psychics qualities of an operator's personality. Emotional stability is understood as a person's capacity to control his emotional state for the purpose of maintaining the necessary level of work performance under extreme stress conditions. By modeling the operator's sensorimotor activity and by comparing the productivity indicators under ordinary conditions with those obtained during work involving an emotional load, the level of emotional stability can be determined.

  2. Intracranial surgical operative apparatus

    NASA Technical Reports Server (NTRS)

    Sheldon, Charles H. (Inventor); Frazer, Robert E. (Inventor); Lutes, Harold R. (Inventor)

    1983-01-01

    Apparatus for operating on the brain with minimal disturbances thereto, including a bullet-shaped expandable device with an end that can be closed for insertion through a small hole in the brain. The device can be expanded after insertion to leave an air pocket through which to extend viewing and cutting devices which enable operation on tumors or the like that lie at the end of the expanded device. A set of probes of varying diameters are also provided, to progressively enlarge a passage leading to the tumor, prior to inserting the expandable device.

  3. A VIRTUAL OPERATING SYSTEM

    SciTech Connect

    Hall, Dennis E.; Scherrer, Deborah K.; Sventek, Joseph S.

    1980-05-01

    Significant progress toward disentangling computing environments from their under lying operating systern has been made. An approach is presented that achieves inter-system uniformity at all three levels of user interface - virtual machine, utilities, and command language. Under specifiable conditions, complete uniformity is achievable without disturbing the underlying operating system. The approach permits accurate computation of the cost to move both people and software to a new system. The cost of moving people is zero, and the cost of moving software is equal to the cost of implementing a virtual machine. Efficiency is achieved through optimization of the primitive functions.

  4. Precision Nova operations

    SciTech Connect

    Ehrlich, R.B.; Miller, J.L.; Saunders, R.L.; Thompson, C.E.; Weiland, T.L.; Laumann, C.W.

    1995-09-01

    To improve the symmetry of x-ray drive on indirectly driven ICF capsules, we have increased the accuracy of operating procedures and diagnostics on the Nova laser. Precision Nova operations includes routine precision power balance to within 10% rms in the ``foot`` and 5% nns in the peak of shaped pulses, beam synchronization to within 10 ps rms, and pointing of the beams onto targets to within 35 {mu}m rms. We have also added a ``fail-safe chirp`` system to avoid Stimulated Brillouin Scattering (SBS) in optical components during high energy shots.

  5. Analysis of operator participation

    NASA Technical Reports Server (NTRS)

    Zarakovskiy, G. M.; Zinchenko, V. P.

    1973-01-01

    The problem of providing a psychological conception of the analysis of operator participation in a form that will allow the qualitative approach to be combined with the quantitative approach is examined. This conception is based on an understanding of the essence of human endeavor in automated control systems that now determine the development of society's productive forces and that are the main object of ergonomic research. Two main types of operator participation were examined; information retrieval with immediate service and information retrieval with delayed service.

  6. Operative management of appendicitis.

    PubMed

    St Peter, Shawn D; Snyder, Charles L

    2016-08-01

    Appendectomy has been the standard of care for appendicitis since the late 1800s, and remains one of the most common operations performed in children. The advent of data-driven medicine has led to questions about every aspect of the operation-whether appendectomy is even necessary, when it should be performed (timing), how the procedure is done (laparoscopic variants versus open and irrigation versus no irrigation), length of hospital stay, and antibiotic duration. The goal of this analysis is to review the current status of, and available data regarding, the surgical management of appendicitis in children. PMID:27521710

  7. Alkaline battery operational methodology

    DOEpatents

    Sholklapper, Tal; Gallaway, Joshua; Steingart, Daniel; Ingale, Nilesh; Nyce, Michael

    2016-08-16

    Methods of using specific operational charge and discharge parameters to extend the life of alkaline batteries are disclosed. The methods can be used with any commercial primary or secondary alkaline battery, as well as with newer alkaline battery designs, including batteries with flowing electrolyte. The methods include cycling batteries within a narrow operating voltage window, with minimum and maximum cut-off voltages that are set based on battery characteristics and environmental conditions. The narrow voltage window decreases available capacity but allows the batteries to be cycled for hundreds or thousands of times.

  8. CALIPSO Instrument Operational

    Atmospheric Science Data Center

    2016-03-17

    ... Thursday, January 28, 2016 UPDATE 3/16:    CALIPSO payload is back to a nominal data acquisition ... was commanded to SAFE mode early Thursday Jan. 28, 2016. All science operations have been suspended. During this time, no data will be ...

  9. Manually operated coded switch

    DOEpatents

    Barnette, Jon H.

    1978-01-01

    The disclosure relates to a manually operated recodable coded switch in which a code may be inserted, tried and used to actuate a lever controlling an external device. After attempting a code, the switch's code wheels must be returned to their zero positions before another try is made.

  10. Basic Water Treatment Operation.

    ERIC Educational Resources Information Center

    Ontario Ministry of the Environment, Toronto.

    This manual was developed for use at workshops designed to introduce the fundamentals of water treatment plant operations. The course consists of lecture-discussions and hands-on activities. Each of the fourteen lessons in this document has clearly stated behavioral objectives to tell the trainee what he should know or do after completing that…

  11. EVA-SCRAM operations

    NASA Technical Reports Server (NTRS)

    Flanigan, Lee A.; Tamir, David; Weeks, Jack L.; Mcclure, Sidney R.; Kimbrough, Andrew G.

    1994-01-01

    This paper wrestles with the on-orbit operational challenges introduced by the proposed Space Construction, Repair, and Maintenance (SCRAM) tool kit for Extra-Vehicular Activity (EVA). SCRAM undertakes a new challenging series of on-orbit tasks in support of the near-term Hubble Space Telescope, Extended Duration Orbiter, Long Duration Orbiter, Space Station Freedom, other orbital platforms, and even the future manned Lunar/Mars missions. These new EVA tasks involve welding, brazing, cutting, coating, heat-treating, and cleaning operations. Anticipated near-term EVA-SCRAM applications include construction of fluid lines and structural members, repair of punctures by orbital debris, refurbishment of surfaces eroded by atomic oxygen, and cleaning of optical, solar panel, and high emissivity radiator surfaces which have been degraded by contaminants. Future EVA-SCRAM applications are also examined, involving mass production tasks automated with robotics and artificial intelligence, for construction of large truss, aerobrake, and reactor shadow shield structures. Realistically achieving EVA-SCRAM is examined by addressing manual, teleoperated, semi-automated, and fully-automated operation modes. The operational challenges posed by EVA-SCRAM tasks are reviewed with respect to capabilities of existing and upcoming EVA systems, such as the Extravehicular Mobility Unit, the Shuttle Remote Manipulating System, the Dexterous End Effector, and the Servicing Aid Tool.

  12. Enforcement Field Operations Manual.

    ERIC Educational Resources Information Center

    Colorado State Dept. of Health, Denver. Div. of Air Pollution Control.

    This manual is designed as a practical handbook for air pollution control officials. A variety of situations and tasks encountered in field operations are described and the appropriate action which should be taken is explained Topics include source detection, source inspection, recording and reporting inspections, maintaining a recording system,…

  13. Camera Operator and Videographer

    ERIC Educational Resources Information Center

    Moore, Pam

    2007-01-01

    Television, video, and motion picture camera operators produce images that tell a story, inform or entertain an audience, or record an event. They use various cameras to shoot a wide range of material, including television series, news and sporting events, music videos, motion pictures, documentaries, and training sessions. Those who film or…

  14. Operant Conditioning - Token Economy.

    ERIC Educational Resources Information Center

    Montgomery, Jacqueline; McBurney, Raymond D.

    Described is an Operant Conditioning-Token Economy Program, teaching patients to be responsible for their own behavior, to make choices, and to be motivated to change. The program was instigated with mentally ill patients in a state hospital and was later used with institutionalized mentally handicapped groups. After two years, only four of the…

  15. Teachers and Operant Conditioning.

    ERIC Educational Resources Information Center

    Frey, Sherman

    A survey was conducted of 406 elementary, middle, and secondary school teachers to determine their understanding, acceptance, and use of the principle of operant conditioning. The treatment of data was by percent and chi square analysis primarily according to sex, experience, degree, and position. Subjects reported that a) they believed that the…

  16. Operation C O P

    ERIC Educational Resources Information Center

    Mueck, Robert P.; Parker, Ashley

    2011-01-01

    Sometimes one never knows what sparks an idea or causes people to come together and take something forward. An example of this is Operation COP at the University of Maryland in College Park. Their version of the "See Something, Say Something" campaign is being touted as a crime prevention program, while it is at the same time an anti-terrorism…

  17. Intelligent Potroom Operation

    SciTech Connect

    Jan Berkow; Larry Banta

    2003-07-29

    The Intelligent Potroom Operation project focuses on maximizing the performance of an aluminum smelter by innovating components for an intelligent manufacturing system. The Intelligent Potroom Advisor (IPA) monitors process data to identify reduction cells exhibiting behaviors that require immediate attention. It then advises operational personnel on those heuristic-based actions to bring the cell back to an optimal operating state in order to reduce the duration and frequency of substandard reduction cell performance referred to as ''Off-Peak Modes'' (OPMs). Techniques developed to identify cells exhibiting OPMs include the use of a finite element model-based cell state estimator for defining the cell's current operating state via advanced cell noise analyses. In addition, rule induction was also employed to identify statistically significant complex behaviors that occur prior to OPMs. The intelligent manufacturing system design, concepts and formalisms developed in this project w ere used as a basis for an intelligent manufacturing system design. Future research will incorporate an adaptive component to automate continuous process improvement, a technology platform with the potential to improve process performance in many of the other Industries of the Future applications as well.

  18. OPERATION PEBBLE. SUMMARY REPORT.

    ERIC Educational Resources Information Center

    NORRED, ROBERT B.

    A COMPREHENSIVE EVALUATION OF OPERATION PEBBLE'S 3 YEAR SUMMER PROGRAM FOR ECONOMICALLY AND EDUCATIONALLY DEPRIVED CHILDREN OF THE UPPER CUMBERLAND REGION OF TENNESSEE IS PRESENTED. THE INTENT OF THE PROJECT WAS TO INVOLVE THE CHILDREN IN EXPERIENCES THAT MIGHT EXPAND THE HORIZONS OF THEIR STAGNANT, HIGHLY STRUCTURED CULTURAL ENVIRONMENT, WITHOUT…

  19. Operation Stay in School.

    ERIC Educational Resources Information Center

    Superintendent's Communicator, 1982

    1982-01-01

    THE FOLLOWING IS THE FULL TEXT OF THIS DOCUMENT: Operation Stay In School is a program that focuses the combined efforts of parents, law enforcement personnel, probation officers, and school district staff on improving school attendance. Under the leadership of Judge Dennis Adams, following extensive study of effective truancy programs throughout…

  20. CALIPSO Instrument Operational

    Atmospheric Science Data Center

    2014-03-05

    ... being briefly in data acquisition mode, the CALIPSO payload computer (PLC) was commanded OFF due to another solar event earlier this ... remain above the 10MeV threshold for laser operations. Science data is not acquired while the payload is in SAFE mode.   ...

  1. Novel operative treatment options.

    PubMed

    Ricketts, D N J; Pitts, N B

    2009-01-01

    There are an increasing number of more novel options available for operative intervention. This chapter outlines a series of operative treatment options which are available to the modern clinician to select from once a decision has been made to treat a carious lesion operatively. A series of novel methods of caries removal have been described; including chemomechanical caries removal, air abrasion, sono-abrasion, polymer rotary burs and lasers. There are also novel approaches to ensure complete caries removal and novel approaches for the management of deep caries. A novel question increasingly asked by clinicians is: does all the caries need to be removed? Operative management options here include: therapeutic fissure sealants, ultraconservative caries removal, stepwise excavation and the Hall technique. In conclusion, there is now a growing wealth of evidence that questions the traditional methods of caries removal and restoring the tooth. In parallel, there is a growing movement exploring the merits of therapeutically sealing caries into the tooth. This philosophy is alien to many of today's dentists and, until further randomized controlled trials are carried out in primary care, prudent caution must be exercised with this promising approach. Research is required into techniques which will allow monitoring of sealed caries to detect any rare, but insidious, failures. These novel techniques are an alternative way of managing the later stages of the caries process from a sounder biological basis and have marked potential benefits to patients from treatment, pain and outcome perspectives.

  2. Surface inspection operator interface

    NASA Astrophysics Data System (ADS)

    Creek, Russell C.

    1992-03-01

    Surface inspection systems are widely used in many industries including steel, tin, aluminum, and paper. These systems generally use machine vision technology to detect defective surface regions and can generate very high data output rates which can be difficult for line operators to absorb and use. A graphical, windowing interface is described which provides the operators with an overview of the surface quality of the inspected web while still allowing them to select individual defective regions for display. A touch screen is used as the only operator input. This required alterations to some screen widgets due to subtle ergonomic differences of touch screen input over mouse input. The interface, although developed for inspecting coated steel, has been designed to be adaptable to other surface inspection applications. Facility is provided to allow the detection, classification, and display functions of the inspection system to be readily changed. Modifications can be implemented on two main levels; changes that reflect the configuration of the hardware system and control the detection and classification components of the surface inspection system are accessible only to authorized staff while those affecting the display and alarm settings of defect types may be changed by operators and this can generally be done dynamically.

  3. Orientation in operator algebras

    PubMed Central

    Alfsen, Erik M.; Shultz, Frederic W.

    1998-01-01

    A concept of orientation is relevant for the passage from Jordan structure to associative structure in operator algebras. The research reported in this paper bridges the approach of Connes for von Neumann algebras and ourselves for C*-algebras in a general theory of orientation that is of geometric nature and is related to dynamics. PMID:9618457

  4. Mission operations management

    NASA Technical Reports Server (NTRS)

    Rocco, David A.

    1994-01-01

    Redefining the approach and philosophy that operations management uses to define, develop, and implement space missions will be a central element in achieving high efficiency mission operations for the future. The goal of a cost effective space operations program cannot be realized if the attitudes and methodologies we currently employ to plan, develop, and manage space missions do not change. A management philosophy that is in synch with the environment in terms of budget, technology, and science objectives must be developed. Changing our basic perception of mission operations will require a shift in the way we view the mission. This requires a transition from current practices of viewing the mission as a unique end product, to a 'mission development concept' built on the visualization of the end-to-end mission. To achieve this change we must define realistic mission success criteria and develop pragmatic approaches to achieve our goals. Custom mission development for all but the largest and most unique programs is not practical in the current budget environment, and we simply do not have the resources to implement all of our planned science programs. We need to shift our management focus to allow us the opportunity make use of methodologies and approaches which are based on common building blocks that can be utilized in the space, ground, and mission unique segments of all missions.

  5. Installing and operating FEGTEMs

    SciTech Connect

    Hetherington, C.J.; Cullis, A.G.; Walker, S.; Turner, J.; Nelson, E.C.; O'Keefe, M.A.

    1997-11-03

    In order to operate at full potential, Field-Emission-Gun Transmission Electron Microscopes (FEG-TEMs) require special environments designed to minimize the effects of vibration and electromagnetic noise. This report shows how careful attention to these details can enable such instruments to achieve their design parameters and produce information transfer to sub-Angstrom resolutions.

  6. Convenience Store Operations.

    ERIC Educational Resources Information Center

    Luter, Robert R.

    This self-paced, individualized instructional guide is designed for use by those who are currently working in a convenience store or by those who wish to learn the basics of convenience store marketing and operations. Addressed in the individual units of the guide are the following topics: today's convenience store, regular duties and…

  7. Electromagnetically Operated Counter

    DOEpatents

    Goldberg, H D; Goldberg, M I

    1951-12-18

    An electromagnetically operated counter wherein signals to be counted are applied to cause stepwise rotation of a rotatable element which is connected to a suitable register. The mechanism involved consists of a rotatable armature having three spaced cores of magnetic material and a pair of diametrically opposed electromagnets with a suitable pulsing circuit to actuate the magnets.

  8. Space Operations Learning Center

    NASA Technical Reports Server (NTRS)

    Lui, Ben; Milner, Barbara; Binebrink, Dan; Kuok, Heng

    2012-01-01

    The Space Operations Learning Center (SOLC) is a tool that provides an online learning environment where students can learn science, technology, engineering, and mathematics (STEM) through a series of training modules. SOLC is also an effective media for NASA to showcase its contributions to the general public. SOLC is a Web-based environment with a learning platform for students to understand STEM through interactive modules in various engineering topics. SOLC is unique in its approach to develop learning materials to teach schoolaged students the basic concepts of space operations. SOLC utilizes the latest Web and software technologies to present this educational content in a fun and engaging way for all grade levels. SOLC uses animations, streaming video, cartoon characters, audio narration, interactive games and more to deliver educational concepts. The Web portal organizes all of these training modules in an easily accessible way for visitors worldwide. SOLC provides multiple training modules on various topics. At the time of this reporting, seven modules have been developed: Space Communication, Flight Dynamics, Information Processing, Mission Operations, Kids Zone 1, Kids Zone 2, and Save The Forest. For the first four modules, each contains three components: Flight Training, Flight License, and Fly It! Kids Zone 1 and 2 include a number of educational videos and games designed specifically for grades K-6. Save The Forest is a space operations mission with four simulations and activities to complete, optimized for new touch screen technology. The Kids Zone 1 module has recently been ported to Facebook to attract wider audience.

  9. DSMS science operations concept

    NASA Technical Reports Server (NTRS)

    Connally, M. J.; Kuiper, T. B.

    2001-01-01

    The Deep Space Mission System (DSMS) Science Operations Concept describes the vision for enabling the use of the DSMS, particularly the Deep Space Network (DSN) for direct science observations in the areas of radio astronomy, planetary radar, radio science and VLBI.

  10. Adolescence and Formal Operations

    ERIC Educational Resources Information Center

    Blasi, A.; Hoeffel, E. C.

    1974-01-01

    Analyzes the relationship between the development of formal operations and the development of the adolescent personality, as hypothesized by Inhelder and Piaget. It is suggested that the concepts of possibility and reflectivity have a variety of meanings, and that once these meanings are examined, the logical foundation for the…

  11. Squash operator and symmetry

    NASA Astrophysics Data System (ADS)

    Tsurumaru, Toyohiro

    2010-01-01

    This article begins with a simple proof of the existence of squash operators compatible with the Bennett-Brassard 1984 (BB84) protocol that suits single-mode as well as multimode threshold detectors. The proof shows that, when a given detector is symmetric under cyclic group C4, and a certain observable associated with it has rank two as a matrix, then there always exists a corresponding squash operator. Next, we go on to investigate whether the above restriction of “rank two” can be eliminated; i.e., is cyclic symmetry alone sufficient to guarantee the existence of a squash operator? The motivation behind this question is that, if this were true, it would imply that one could realize a device-independent and unconditionally secure quantum key distribution protocol. However, the answer turns out to be negative, and moreover, one can instead prove a no-go theorem that any symmetry is, by itself, insufficient to guarantee the existence of a squash operator.

  12. Squash operator and symmetry

    SciTech Connect

    Tsurumaru, Toyohiro

    2010-01-15

    This article begins with a simple proof of the existence of squash operators compatible with the Bennett-Brassard 1984 (BB84) protocol that suits single-mode as well as multimode threshold detectors. The proof shows that, when a given detector is symmetric under cyclic group C{sub 4}, and a certain observable associated with it has rank two as a matrix, then there always exists a corresponding squash operator. Next, we go on to investigate whether the above restriction of 'rank two' can be eliminated; i.e., is cyclic symmetry alone sufficient to guarantee the existence of a squash operator? The motivation behind this question is that, if this were true, it would imply that one could realize a device-independent and unconditionally secure quantum key distribution protocol. However, the answer turns out to be negative, and moreover, one can instead prove a no-go theorem that any symmetry is, by itself, insufficient to guarantee the existence of a squash operator.

  13. Engineer Equipment Operator.

    ERIC Educational Resources Information Center

    Marine Corps Inst., Washington, DC.

    This student guide, one of a series of correspondence training courses designed to improve the job performance of members of the Marine Corps, deals with the skills needed by engineer equipment operators. Addressed in the seven individual units of the course are the following topics: introduction to Military Occupation Specialty (MOS) 1345…

  14. OPERATION ALPHABET, 1.

    ERIC Educational Resources Information Center

    COATES, ROBERT H., ED.

    OPERATION ALPHABET 1 IS THE FIRST OF A SERIES OF WORKBOOKS PLANNED TO HELP ADULTS LEARN TO READ AND WRITE. EACH OF THE 100 LESSONS DEVELOPS ONE IDEA OF INTEREST TO ADULTS, EMPHASIZING KEY WORDS AND PRACTICE WRITING EXERCISES. WORDS USED IN THE LESSONS ARE DEFINED AT THE END OF THE BOOK. THIS DOCUMENT IS AVAILABLE FROM NOBLE AND NOBLE, PUBLISHERS,…

  15. Fast Fuzzy Arithmetic Operations

    NASA Technical Reports Server (NTRS)

    Hampton, Michael; Kosheleva, Olga

    1997-01-01

    In engineering applications of fuzzy logic, the main goal is not to simulate the way the experts really think, but to come up with a good engineering solution that would (ideally) be better than the expert's control, In such applications, it makes perfect sense to restrict ourselves to simplified approximate expressions for membership functions. If we need to perform arithmetic operations with the resulting fuzzy numbers, then we can use simple and fast algorithms that are known for operations with simple membership functions. In other applications, especially the ones that are related to humanities, simulating experts is one of the main goals. In such applications, we must use membership functions that capture every nuance of the expert's opinion; these functions are therefore complicated, and fuzzy arithmetic operations with the corresponding fuzzy numbers become a computational problem. In this paper, we design a new algorithm for performing such operations. This algorithm is applicable in the case when negative logarithms - log(u(x)) of membership functions u(x) are convex, and reduces computation time from O(n(exp 2))to O(n log(n)) (where n is the number of points x at which we know the membership functions u(x)).

  16. Media Center: Operations Handbook.

    ERIC Educational Resources Information Center

    Dependents Schools (DOD), Washington, DC.

    This guide to basic technical procedures recommended in the operation of within-school media centers is intended for all Department of Defense Dependent Schools (DoDDS) media specialists, clerks, aides, and technicians. The first four sections refer to the general media program functions identified in the related manual, "A is for Apple:…

  17. Variability as an Operant?

    ERIC Educational Resources Information Center

    Holth, Per

    2012-01-01

    A series of experiments on operant variability by Neuringer and colleagues (e.g., Neuringer, 1986, 2002; Page & Neuringer, 1985) have been repeatedly cited as showing that behavioral variability can be reinforced by making reinforcement contingent on it. They showed that the degree of variability in pigeons' eight-peck sequences, as measured by U…

  18. Concept of Operations: Essence

    SciTech Connect

    Hutton, William J.

    2014-04-01

    This concept of operations is designed to give the reader a brief overview of the National Rural Electric Cooperative Association’s Essence project and a description of the Essence device design. The data collected by the device, how the data are used, and how the data are protected are also discussed in this document.

  19. Operations Policy Manual, 2012

    ERIC Educational Resources Information Center

    Teacher Education Accreditation Council, 2011

    2011-01-01

    The Teacher Education Accreditation Council's (TEAC's) "Operations Policy Manual" outlines all of TEAC's current policies and procedures related to TEAC members, TEAC administration, and the public, and includes the Bylaws of the Teacher Education Accreditation Council. Contents include: (1) Policies Related to TEAC Members; (2) Policies Related…

  20. Operations Policy Manual, 2010

    ERIC Educational Resources Information Center

    Teacher Education Accreditation Council, 2010

    2010-01-01

    The Teacher Education Accreditation Council (TEAC) "Operations Policy Manual" outlines all of TEAC's current policies and procedures related to TEAC members, TEAC administration, and the public, and includes the Bylaws of the Teacher Education Accreditation Council, Inc. An index is also included.

  1. BASIC Matrix Operations.

    ERIC Educational Resources Information Center

    Digital Equipment Corp., Maynard, MA.

    The curriculum materials and computer programs in this booklet introduce the idea of a matrix. They go on to discuss matrix operations of addition, subtraction, multiplication by a scalar, and matrix multiplication. The last section covers several contemporary applications of matrix multiplication, including problems of communication…

  2. Operations and Modeling Analysis

    NASA Technical Reports Server (NTRS)

    Ebeling, Charles

    2005-01-01

    The Reliability and Maintainability Analysis Tool (RMAT) provides NASA the capability to estimate reliability and maintainability (R&M) parameters and operational support requirements for proposed space vehicles based upon relationships established from both aircraft and Shuttle R&M data. RMAT has matured both in its underlying database and in its level of sophistication in extrapolating this historical data to satisfy proposed mission requirements, maintenance concepts and policies, and type of vehicle (i.e. ranging from aircraft like to shuttle like). However, a companion analyses tool, the Logistics Cost Model (LCM) has not reached the same level of maturity as RMAT due, in large part, to nonexistent or outdated cost estimating relationships and underlying cost databases, and it's almost exclusive dependence on Shuttle operations and logistics cost input parameters. As a result, the full capability of the RMAT/LCM suite of analysis tools to take a conceptual vehicle and derive its operations and support requirements along with the resulting operating and support costs has not been realized.

  3. Small satellite space operations

    NASA Technical Reports Server (NTRS)

    Reiss, Keith

    1994-01-01

    CTA Space Systems has played a premier role in the development of the 'lightsat' programs of the 80's and 90's. The high costs and development times associated with conventional LEO satellite design, fabrication, launch, and operations continue to motivate the development of new methodologies, techniques, and generally low cost and less stringently regulated satellites. These spacecraft employ low power 'lightsat' communications (versus TDRSS for NASA's LEO's) and typically fly missions with payload/experiment suites that can succeed, for example, without heavily redundant backup systems and large infrastructures of personnel and ground support systems. Such small yet adaptable satellites are also typified by their very short contract-to-launch times (often one to two years). This paper reflects several of the methodologies and perspectives of our successful involvement in these innovative programs and suggests how they might relieve NASA's mounting pressures to reduce the cost of both the spacecraft and their companion mission operations. It focuses on the use of adaptable, sufficiently powerful yet inexpensive PC-based ground systems for wide ranging user terminal (UT) applications and master control facilities for mission operations. These systems proved themselves in successfully controlling more than two dozen USAF, USN, and ARPA satellites at CTA/SS. UT versions have linked with both GEO and LEO satellites and functioned autonomously in relay roles often in remote parts of the world. LEO applications particularly illustrate the efficacy of these concepts since a user can easily mount a lightweight antenna, usually an omni or helix with light duty rotors and PC-based drivers. A few feet of coax connected to a small transceiver module (the size of a small PC) and a serial line to an associated PC establishes a communications link and together with the PC constitute a viable ground station. Applications included geomagnetic mapping; spaceborne solid state

  4. Experiment design and operations

    NASA Technical Reports Server (NTRS)

    Sellers, P. J.; Hall, F. G.; Markham, B. J.; Wang, J. R.; Strebel, D. E.

    1990-01-01

    The objectives, design, and field operations of the First ISLSCP Field Experiment (FIFE) are described. The simultaneous acquisition of satellite, atmosphere, and surface data, and the understanding of the processes governing surface energy and mass exchange and how these are manifested in satellite-resolution radiometric data are identified as the specific objectives of the field-phase experiment. The central issues concerning the design of the field experiment are considered: the size of the site, the duration of the experiment, and the location of the site; it is noted that the Konza Prairie National Reserve was selected as the focus of the study. Field operations in 1987 and 1989 are discussed, and it is pointed out that a data set is available now from a single combined repository to all FIFE investigators, and that scientists can test models and algorithms on scales consistent with satellite observations and with enough supporting data on finer scales.

  5. Airline Operations Aid

    NASA Technical Reports Server (NTRS)

    1993-01-01

    C Language Integrated Production System (CLIPS), a NASA-developed expert systems program, is used by American Airlines for three purposes: as a rapid prototyping tool; to develop production prototypes; and to develop production application. An example of the latter is CLIPS' use in "Hub S1AAshing," a knowledge based system that recommends contingency plans when severe schedule reductions must be made. Hub S1AAshing has replaced a manual, labor intensive process. It saves time and allows Operations Control Coordinators to handle more difficult situations. Because the system assimilates much of the information necessary to facilitate educated decision making, it minimizes negative impact in situations where it is impossible to operate all flights.

  6. Tevatron lower temperature operation

    SciTech Connect

    Theilacker, J.C.

    1994-07-01

    This year saw the completion of three accelerator improvement projects (AIP) and two capital equipment projects pertaining to the Tevatron cryogenic system. The projects result in the ability to operate the Tevatron at lower temperature, and thus higher energy. Each project improves a subsystem by expanding capabilities (refrigerator controls), ensuring reliability (valve box, subatmospheric hardware, and compressor D), or enhancing performance (cold compressors and coldbox II). In January of 1994, the Tevatron operated at an energy of 975 GeV for the first time. This was the culmination, of many years of R&D, power testing in a sector (one sixth) of the Tevatron, and final system installation during the summer of 1993. Although this is a modest increase in energy, the discovery potential for the Top quark is considerably improved.

  7. NICMOS FOM Operation Test

    NASA Astrophysics Data System (ADS)

    Noll, Keith

    2001-07-01

    This test verifies the FOM's mechanical operation. A 7 x 1 grid of points will be made by moving the FOM in steps of 6.5 from -20 to +19 arcsec relative to the 0 position {-36 to +3 relative to the default NIC3 FOM position of +16 arcsec}. We also have an additional FOM position at the default NIC3 position. These exposures all use the F166N filter. At the end of this sequence we will take F222M exposures at three additional FOM positions, the default position {+16 arcsec relative to the center point of the FOM mechanical range} and +/- 2 arcsec. This is to test for vignetting. Prerequisites for this test are cool down to nominal operating temperature {cold and stable, near the expected final temperature set point, but not necessarily the final temperature set point} and the filter wheel minifunctional and the filter wheel tests {proposals 8944 and 8972}.

  8. Hurricane slams gulf operations

    SciTech Connect

    Not Available

    1992-09-07

    This paper reports that reports of damage by Hurricane Andrew escalated last week as operators stepped up inspections of oil and gas installations in the Gulf of Mexico. By midweek, companies operating in the gulf and South Louisiana were beginning to agree that earlier assessments of damage only scratched the surface. Damage reports included scores of lost, toppled, or crippled platforms, pipeline ruptures, and oil slicks. By midweek the U.S. coast Guard had received reports of 79 oil spills. Even platforms capable of resuming production in some instances were begin curtailed because of damaged pipelines. Offshore service companies the another 2-4 weeks could be needed to fully assess Andrew's wrath. Lack of personnel and equipment was slowing damage assessment and repair.

  9. White Cliffs: Operating Experience

    NASA Technical Reports Server (NTRS)

    Kaneff, S.

    1984-01-01

    The fourteen dish white cliffs solar power station area is remote and subject to extreme environmental conditions, solution of the associated problems required careful and thoughtful attention and the application of resources. Notwithstanding the wide range and harshness of conditions, the difficulties caused by remoteness and the lack of a technological base and the need for relatively rapid demonstration of success, the project has had a very positive outcome. Qualitative and quantitative information and lessons are now available to enable considerable simplifications to be made for a new system, reducing both hardware and operation and maintenance costs. Experience and lessons are presented, particularly in relation to: system performance in various environmental conditions; design philosophies for collectors, the array, control systems, engine and plant; operation and maintenance strategies and cost reducing possibilities. Experience so far gives encouragement for the future of such paraboloidal dish systems in appropriate areas.

  10. THERMALLY OPERATED VAPOR VALVE

    DOEpatents

    Dorward, J.G. Jr.

    1959-02-10

    A valve is presented for use in a calutron to supply and control the vapor to be ionized. The invention provides a means readily operable from the exterior of the vacuum tank of the apparatuss without mechanical transmission of forces for the quick and accurate control of the ionizing arc by a corresponding control of gas flow theretos thereby producing an effective way of carefully regulating the operation of the calutron. The invention consists essentially of a tube member extending into the charge bottle of a calutron devices having a poppet type valve closing the lower end of the tube. An electrical heating means is provided in the valve stem to thermally vary the length of the stem to regulate the valve opening to control the flow of material from the charge bottle.

  11. On the Neuberger overlap operator

    NASA Astrophysics Data System (ADS)

    Boriçi, Artan

    1999-04-01

    We compute Neuberger's overlap operator by the Lanczos algorithm applied to the Wilson-Dirac operator. Locality of the operator for quenched QCD data and its eigenvalue spectrum in an instanton background are studied.

  12. Operation of the accelerator

    SciTech Connect

    Pardo, R.C.; Batzka, B.; Billquist, P.J.

    1995-08-01

    Fiscal Year 1994 was the first year of seven-day operation since ATLAS became a national user facility in 1985. ATLAS made the most of the opportunity this year by providing 5200 hours of beam on-target to the research program. A record number of 60 experiments were completed and the {open_quotes}facility reliability{close_quotes} remained near the 90% level. Seven-day operation was made possible with the addition to the staff of two operator positions providing single-operator coverage during the weekend period. The normally scheduled coverage was augmented by an on-call list of system experts who respond to emergencies with phone-in advice and return to the Laboratory when necessary. This staffing approach continues but we rearranged our staffing patterns so that we now have one cryogenics engineer working a shift pattern which includes 8-hour daily coverage during the weekend. ATLAS provided a beam mix to users consisting of 26 different isotopic species, 23% of which were for A>100 in FY 1994. Approximately 60% of the beam time was provided by the Positive Ion Injector, slightly less than the usage rate of FY 1993. Experiments using uranium or lead beams accounted for 16.4% of the total beam time. The ECR ion source and high-voltage platform functioned well throughout the year. A new technique for solid material production in the source was developed which uses a sputtering process wherein the sample of material placed near the plasma chamber wall is biased negatively. Plasma ions are accelerated into the sample and material is sputtered from the surface into the plasma. This technique is now used routinely for many elements. Runs of calcium, germanium, nickel, lead, tellurium, and uranium were carried out with this technique.

  13. Magnetically operated check valve

    NASA Technical Reports Server (NTRS)

    Morris, Brian G. (Inventor); Bozeman, Richard J., Jr. (Inventor)

    1994-01-01

    A magnetically operated check valve is disclosed. The valve is comprised of a valve body and a movable poppet disposed therein. A magnet attracts the poppet to hold the valve shut until the force of fluid flow through the valve overcomes the magnetic attraction and moves the poppet to an unseated, open position. The poppet and magnet are configured and disposed to trap a magnetically attracted particulate and prevent it from flowing to a valve seating region.

  14. Pre-operative anaemia.

    PubMed

    Clevenger, B; Richards, T

    2015-01-01

    Pre-operative anaemia is a relatively common finding, affecting a third of patients undergoing elective surgery. Traditionally associated with chronic disease, management has historically focused on the use of blood transfusion as a solution for anaemia in the peri-operative period. Data from large series now suggest that anaemia is an independent risk associated with poor outcome in both cardiac and non-cardiac surgery. Furthermore, blood transfusion does not appear to ameliorate this risk, and in fact may increase the risk of postoperative complications and hospital length of stay. Consequently, there is a need to identify, diagnose and manage pre-operative anaemia to reduce surgical risk. Discoveries in the pathways of iron metabolism have found that chronic disease can cause a state of functional iron deficiency leading to anaemia. The key iron regulatory protein hepcidin, activated in response to inflammation, inhibits absorption of iron from the gastrointestinal tract and further reduces bioavailability of iron stores for red cell production. Consequently, although iron stores (predominantly ferritin) may be normal, the transport of iron either from the gastrointestinal tract or iron stores to the bone marrow is inhibited, leading to a state of 'functional' iron deficiency and subsequent anaemia. Since absorption from the gastrointestinal tract is blocked, increasing oral iron intake is ineffective, and studies are now looking at the role of intravenous iron to treat anaemia in the surgical setting. In this article, we review the incidence and impact of anaemia on the pre-operative patient. We explain how anaemia may be caused by functional iron deficiency, and how iron deficiency anaemia may be diagnosed and treated.

  15. Launch Vehicle Operations Simulator

    NASA Technical Reports Server (NTRS)

    Blackledge, J. W.

    1974-01-01

    The Saturn Launch Vehicle Operations Simulator (LVOS) was developed for NASA at Kennedy Space Center. LVOS simulates the Saturn launch vehicle and its ground support equipment. The simulator was intended primarily to be used as a launch crew trainer but it is also being used for test procedure and software validation. A NASA/contractor team of engineers and programmers implemented the simulator after the Apollo XI lunar landing during the low activity periods between launches.

  16. Explicit Fourier wavefield operators

    NASA Astrophysics Data System (ADS)

    Ferguson, R. J.; Margrave, G. F.

    2006-04-01

    Explicit wavefield extrapolators are based on direct analytic mathematical formulae that express the output as an extrapolation operator acting on the input, while implicit methods usually require the calculation of the numerical inverse of a matrix to obtain the output. Typically, explicit methods are faster than implicit methods, and they often give more insight into the physics of the wave propagation, but they often suffer from instability. Four different explicit extrapolators based on Fourier theory are presented and analysed. They are: PS (ordinary phase shift), GPSPI (generalized phase shift plus interpolation), NSPS (non-stationary phase shift) and SNPS (symmetric non-stationary phase shift). A formal proof is given that NSPS in a direction orthogonal to the velocity gradient is the mathematical adjoint process to GPSPI in the opposite direction. This motivates the construction of SNPS that combines NSPS and GPSPI in a symmetric fashion. This symmetry (under interchange of input and output lateral coordinates) is required by reciprocity arguments. PS and SNPS are symmetric while NSPS and GPSPI are not. A numerical stability study using SVD (singular value decomposition) shows that all of these extrapolators can become unstable for strong lateral velocity gradients. Unstable operators allow amplitudes to grow non-physically in a recursion. Stability is enhanced by introducing a small (~3 per cent) imaginary component to the velocities. This causes a numerical attenuation that tends to stabilize the operators but does not address the cause of the instability. For the velocity model studied (a very challenging case) GPSPI and NSPS have exactly the same instability while SNPS is always more stable. Instability manifests in a complicated way as a function of extrapolation step size, frequency, velocity gradient, and strength of numerical attenuation. The SNPS operator can be stabilized over a wide range of conditions with considerably less attenuation than is

  17. Operational Collision Avoidance

    NASA Technical Reports Server (NTRS)

    Guit, Bill

    2015-01-01

    This presentation will describe the early days of the EOS Aqua and Aura operational collision avoidance process. It will highlight EOS debris avoidance maneuvers, EOS high interest event statistic and A-Train systematic conjunctions and conclude with future challenges. This is related to earlier e-DAA (tracking number 21692) that an abstract was submitted to a different conference. Eric Moyer, ESMO Deputy Project Manager has reviewed and approved this presentation on May 6, 2015

  18. Education Payload Operation - Demonstrations

    NASA Technical Reports Server (NTRS)

    Keil, Matthew

    2009-01-01

    Education Payload Operation - Demonstrations (EPO-Demos) are recorded video education demonstrations performed on the International Space Station (ISS) by crewmembers using hardware already onboard the ISS. EPO-Demos are videotaped, edited, and used to enhance existing NASA education resources and programs for educators and students in grades K-12. EPO-Demos are designed to support the NASA mission to inspire the next generation of explorers.

  19. Traditional operative treatment options.

    PubMed

    Ricketts, D N J; Pitts, N B

    2009-01-01

    Operative intervention should be avoided, whenever possible, by adopting a preventive approach. Timely management of early caries can lead to arrest and possibly remineralization of the lesion rendering operative intervention unnecessary. The dentist must judge when the tooth tissue has become sufficiently demineralized to allow bacterial ingress leading to irreversible changes in the tissue. Once a decision has been made to restore a tooth, the clinician must decide, from a series of traditional operative treatment options, what materials should be used in the restoration and what preparation will achieve good retention and best preservation of tooth structure. With the development of new adhesive materials and a more conservative approach, a new era of minimally invasive dentistry has dawned. Improvements in the properties of composite materials have made them the choice for coronal aesthetic restorations: for posterior restorations involving load-bearing occlusal surfaces, amalgam is still the most commonly used material in UK dental practice; glass ionomer materials also have a place in minimally invasive dentistry--patterns of use differing in different counties. The numbers of studies investigating minimal caries removal are relatively limited; there are still scope and need for research in this field.

  20. Operational health physics training

    SciTech Connect

    1992-06-01

    The initial four sections treat basic information concerning atomic structure and other useful physical quantities, natural radioactivity, the properties of {alpha}, {beta}, {gamma}, x rays and neutrons, and the concepts and units of radiation dosimetry (including SI units). Section 5 deals with biological effects and the risks associated with radiation exposure. Background radiation and man-made sources are discussed next. The basic recommendations of the ICRP concerning dose limitations: justification, optimization (ALARA concepts and applications) and dose limits are covered in Section seven. Section eight is an expanded version of shielding, and the internal dosimetry discussion has been extensively revised to reflect the concepts contained in the MIRD methodology and ICRP 30. The remaining sections discuss the operational health physics approach to monitoring radiation. Individual sections include radiation detection principles, instrument operation and counting statistics, health physics instruments and personnel monitoring devices. The last five sections deal with the nature of, operation principles of, health physics aspects of, and monitoring approaches to air sampling, reactors, nuclear safety, gloveboxes and hot cells, accelerators and x ray sources. Decontamination, waste disposal and transportation of radionuclides are added topics. Several appendices containing constants, symbols, selected mathematical topics, and the Chart of the Nuclides, and an index have been included.

  1. CH Packaging Operations Manual

    SciTech Connect

    None, None

    2008-09-11

    This document provides the user with instructions for assembling a payload. All the steps in Subsections 1.2, Preparing 55-Gallon Drum Payload Assembly; 1.3, Preparing "Short" 85-Gallon Drum Payload Assembly (TRUPACT-II and HalfPACT); 1.4, Preparing "Tall" 85-gallon Drum Payload Assembly (HalfPACT only); 1.5, Preparing 100-Gallon Drum Payload Assembly; 1.6, Preparing SWB Payload Assembly; and 1.7, Preparing TDOP Payload Assembly, must be completed, but may be performed in any order as long as radiological control steps are not bypassed. Transport trailer operations, package loading and unloading from transport trailers, hoisting and rigging activities such as ACGLF operations, equipment checkout and shutdown, and component inspection activities must be performed, but may be performed in any order and in parallel with other activities as long as radiological control steps are not bypassed. Steps involving OCA/ICV lid removal/installation and payload removal/loading may be performed in parallel if there are multiple operators working on the same packaging. Steps involving removal/installation of OCV/ICV upper and lower main O-rings must be performed in sequence.

  2. CH Packaging Operations Manual

    SciTech Connect

    None, None

    2009-05-27

    This document provides the user with instructions for assembling a payload. All the steps in Subsections 1.2, Preparing 55-Gallon Drum Payload Assembly; 1.3, Preparing "Short" 85-Gallon Drum Payload Assembly (TRUPACT-II and HalfPACT); 1.4, Preparing "Tall" 85-Gallon Drum Payload Assembly (HalfPACT only); 1.5, Preparing 100-Gallon Drum Payload Assembly; 1.6, Preparing Shielded Container Payload Assembly; 1.7, Preparing SWB Payload Assembly; and 1.8, Preparing TDOP Payload Assembly, must be completed, but may be performed in any order as long as radiological control steps are not bypassed. Transport trailer operations, package loading and unloading from transport trailers, hoisting and rigging activities such as ACGLF operations, equipment checkout and shutdown, and component inspection activities must be performed, but may be performed in any order and in parallel with other activities as long as radiological control steps are not bypassed. Steps involving OCA/ICV lid removal/installation and payload removal/loading may be performed in parallel if there are multiple operators working on the same packaging. Steps involving removal/installation of OCV/ICV upper and lower main O-rings must be performed in sequence, except as noted.

  3. Plans for National Ignition Facility operations training and operations procedures

    SciTech Connect

    Mantrom, D.D., LLNL

    1998-06-01

    A preliminary plan for National Ignition Facility (NIF) Operations training developed for the 200+ staff anticipated to operate the NIF facility is discussed. We also address the development and implementation of NIF Operations procedures. These procedures serve as an essential part of the staff training program. A special aspect of NIF Operations procedures is that they will be on-line with electronic links to design, operations, and test databases, and will likely incorporate electronic checklists and archiving capabilities.

  4. California ISO: Operational perspectives

    SciTech Connect

    Allen, J.E.

    1996-12-31

    On December 20, 1995, the California Public Utilities Commission (CPUC) voted 3-2 in favor of a plan to restructure California`s electricity market. CPUC`s decision envisions a new market structure for electric utilities that offers customers more choice and flexibility in energy services at lower prices and would serve to move the state`s utilities from the traditional monopolistic structure to a more market-driven system. The proposed market system is called, in a general sense of reference, Western Power Exchange (WEPEX). Within the WEPEX process, an Independent System Operator (ISO) and a Power Exchange (PX or PEX) will be established. The ISO and PX are to be separate and independent, nonprofit organizations regulated by the Federal Energy Regulatory Commission (FERC). Initially the ISO will have operational jurisdiction over Southern California Edison`s 500 kV and 230 kV system, as well as Pacific Gas & Electric`s and San Diego Gas & Electric`s transmission system 500 kV through 60 kV, with a few special exceptions. Three investor owned utilities (IOUs), San Diego Gas & Electric (SDG&E), Southern California Edison (SCE), and Pacific Gas & Electric (PG&E), along with stake-holders in compliance with the CPUC`s decision, are working together to implement the Independent System Operator (ISO). The three IOUs subsequently transfer control of ISO related work such as this to a Trust to be established in accordance with and approval of the California State Public Utilities Commission.

  5. Equipment Operational Requirements

    SciTech Connect

    Greenwalt, B; Henderer, B; Hibbard, W; Mercer, M

    2009-06-11

    The Iraq Department of Border Enforcement is rich in personnel, but poor in equipment. An effective border control system must include detection, discrimination, decision, tracking and interdiction, capture, identification, and disposition. An equipment solution that addresses only a part of this will not succeed, likewise equipment by itself is not the answer without considering the personnel and how they would employ the equipment. The solution should take advantage of the existing in-place system and address all of the critical functions. The solutions are envisioned as being implemented in a phased manner, where Solution 1 is followed by Solution 2 and eventually by Solution 3. This allows adequate time for training and gaining operational experience for successively more complex equipment. Detailed descriptions of the components follow the solution descriptions. Solution 1 - This solution is based on changes to CONOPs, and does not have a technology component. It consists of observers at the forts and annexes, forward patrols along the swamp edge, in depth patrols approximately 10 kilometers inland from the swamp, and checkpoints on major roads. Solution 2 - This solution adds a ground sensor array to the Solution 1 system. Solution 3 - This solution is based around installing a radar/video camera system on each fort. It employs the CONOPS from Solution 1, but uses minimal ground sensors deployed only in areas with poor radar/video camera coverage (such as canals and streams shielded by vegetation), or by roads covered by radar but outside the range of the radar associated cameras. This document provides broad operational requirements for major equipment components along with sufficient operational details to allow the technical community to identify potential hardware candidates. Continuing analysis will develop quantities required and more detailed tactics, techniques, and procedures.

  6. IBRD Operational Decision Framework

    SciTech Connect

    Greenwalt, R; Hibbard, W; Raber, E; Carlsen, T; Folks, K; MacQueen, D; Mancieri, S; Bunt, T; Richards, J; Hirabayashi-Dethier, J

    2010-11-12

    The IBRD Operational Decision Framework in this document is an expansion of an emerging general risk management framework under development by an interagency working group. It provides the level of detail necessary to develop a general Consequence Management Guidance Document for biological contamination remediation and restoration. It is the intent of this document to support both wide area and individual site remediation and restoration activities. This product was initiated as a portion of the IBRD Task 1 Systems Analysis to aid in identification of wide area remediation and restoration shortcomings and gaps. The draft interagency general risk management framework was used as the basis for the analysis. The initial Task 1 analysis document expanded the draft interagency framework to a higher level of resolution, building on both the logic structure and the accompanying text explanations. It was then employed in a qualitative manner to identify responsible agencies, data requirements, tool requirements, and current capabilities for each decision and task. This resulted in identifying shortcomings and gaps needing resolution. Several meetings of a joint LLNL/SNL working group reviewed and approved the initial content of this analysis. At the conclusion of Task 1, work continued on the expanded framework to generate this Operational Decision Framework which is consistent with the existing interagency general risk management framework. A large LLNL task group met repeatedly over a three-month period to develop the expanded framework, coordinate the framework with the biological remediation checklist, and synchronize the logic with the Consequence Management Plan table of contents. The expanded framework was briefed at a large table top exercise reviewing the interagency risk management framework. This exercise had representation from major US metropolitan areas as well as national agencies. This product received positive comments from the participants. Upon

  7. Joseph Lister's first operation

    PubMed Central

    Richardson, Ruth; Rhodes, Bryan

    2013-01-01

    Joseph Lister was still a medical student in 1851 when he served as house surgeon at University College Hospital, London, under John Erichsen. Here we report the first major operation that Lister accomplished, hitherto apparently missed by biographers. We chart his exemplary dealings with an emergency case of eviscerating stab wound in a woman brought to casualty at night, when he had been in post for less than a month. The case demonstrates Lister's fundamental competence at an early stage in his training. We outline the context of debate and controversy over the repair of lacerated gut at the time, and argue that Lister's period at University College London was profoundly formative.

  8. On operator strategic behavior

    NASA Technical Reports Server (NTRS)

    Hancock, P. A.

    1991-01-01

    Deeper and more detailed knowledge as to how human operators such as pilots respond, singly and in groups, to demands on their performance which arise from technical systems will support the manipulation of such systems' design in order to accommodate the foibles of human behavior. Efforts to understand how self-autonomy impacts strategic behavior and such related issues as error generation/recognition/correction are still in their infancy. The present treatment offers both general and aviation-specific definitions of strategic behavior as precursors of prospective investigations.

  9. Emergency Operation Center

    NASA Technical Reports Server (NTRS)

    Chinea, Anoushka Z.

    1995-01-01

    The Emergency Operation Center (EOC) is a site from which NASA LaRC Emergency Preparedness Officials exercise control and direction in an emergency. Research was conducted in order to determine what makes an effective EOC. Specifically information concerning the various types of equipment and communication capability that an efficient EOC should contain (i.e., computers, software, telephone systems, radio systems, etc.) was documented. With this information a requirements document was written stating a brief description of the equipment and required quantity to be used in an EOC and then compared to current capabilities at the NASA Langley Research Center.

  10. GMRES and integral operators

    SciTech Connect

    Kelley, C.T.; Xue, Z.Q.

    1994-12-31

    Many discretizations of integral equations and compact fixed point problems are collectively compact and strongly convergent in spaces of continuous functions. These properties not only lead to stable and convergent approximations but also can be used in the construction of fast multilevel algorithms. Recently the GMRES algorithm has become a standard coarse mesh solver. The purpose of this paper is to show how the special properties of integral operators and their approximations are reflected in the performance of the GMRES iteration and how these properties can be used to strengthen the norm in which convergence takes place. The authors illustrate these ideas with composite Gauss rules for integral equations on the unit interval.

  11. Peri-operative anaphylaxis

    PubMed Central

    Nel, Linda; Eren, Efrem

    2011-01-01

    Peri-operative anaphylaxis is an important cause for mortality and morbidity associated with anaesthesia. The true incidence is unknown and is most likely under reported. Diagnosis can be difficult, particularly as a number of drugs are given simultaneously and any of these agents can potentially cause anaphylaxis. This review covers the clinical features, differential diagnosis and management of anaphylaxis associated with anaesthesia. The investigations to confirm the clinical suspicion of anaphylaxis and further tests to identify the likely drug(s) are examined. Finally the salient features of common and rare causes including non-drug substances are described. PMID:21235622

  12. Electrostatic Levitator Operations

    NASA Technical Reports Server (NTRS)

    1998-01-01

    Dr. Jan Rogers and Dr. Michael Robinson operate the Electrostatic Levitator (ESL) at NASA's Marshall Space Flight Center (MSFC). The ESL uses static electricity to suspend an object (about 2-3 mm in diameter) inside a vacuum chamber while a laser heats the sample until it melts. This lets scientists record a wide range of physical properties without the sample contacting the container or any instruments, conditions that would alter the readings. The Electrostatic Levitator is one of several tools used in NASA's microgravity materials science program.

  13. ALMA science operations

    NASA Astrophysics Data System (ADS)

    Nyman, Lars-Åke; Andreani, Paola; Hibbard, John; Okumura, Sachiko K.

    2010-07-01

    The ALMA (Atacama Large Millimeter/submillimeter Array) project is an international collaboration between Europe, East Asia and North America in cooperation with the Republic of Chile. The ALMA Array Operations Site (AOS) is located at Chajnantor, a plateau at an altitude of 5000 m in the Atacama desert in Chile, and the ALMA Operations Support Facility (OSF) is located near the AOS at an altitude of 2900 m. ALMA will consist of an array of 66 antennas, with baselines up to 16 km and state-of-the-art receivers that cover all the atmospheric windows up to 1 THz. An important component of ALMA is the compact array of twelwe 7-m and four 12-m antennas (the Atacama Compact Array, ACA), which will greatly enhance ALMA's ability to image extended sources. Construction of ALMA started in 2003 and will be completed in 2013. Commissioning started in January 2010 and Early Science Operations is expected to start during the second half of 2011. ALMA science operations is provided by the Joint ALMA Observatory (JAO) in Chile, and the three ALMA Regional Centers (ARCs) located in each ALMA region - Europe, North America and East Asia. ALMA observations will take place 24h per day, interrupted by maintenance periods, and will be done in service observing mode with flexible (dynamic) scheduling. The observations are executed in the form of scheduling blocks (SBs), each of which contains all information necessary to schedule and execute the observations. The default output to the astronomer will be pipeline-reduced images calibrated according to the calibration plan. The JAO is responsible for the data product quality. All science and calibration raw data are captured and archived in the ALMA archive, a distributed system with nodes at the OSF, the Santiago central office and the ARCs. Observation preparation will follow a Phase 1/Phase 2 process. During Phase 1, observation proposals will be created using software tools provided by the JAO and submitted for scientific and

  14. Revamping Spacecraft Operational Intelligence

    NASA Technical Reports Server (NTRS)

    Hwang, Victor

    2012-01-01

    The EPOXI flight mission has been testing a new commercial system, Splunk, which employs data mining techniques to organize and present spacecraft telemetry data in a high-level manner. By abstracting away data-source specific details, Splunk unifies arbitrary data formats into one uniform system. This not only reduces the time and effort for retrieving relevant data, but it also increases operational visibility by allowing a spacecraft team to correlate data across many different sources. Splunk's scalable architecture coupled with its graphing modules also provide a solid toolset for generating data visualizations and building real-time applications such as browser-based telemetry displays.

  15. Tractor Operation and Daily Care.

    ERIC Educational Resources Information Center

    Fore, J. M.; And Others

    Written for the tractor operator, the manual describes, with the aid of colored illustrations and diagrams, the tasks involved in the proper operation and daily maintenance of tractors. It offers explanations for the desirability of the various servicing and adjustment operations, as well as guidelines for tractor operation and safety. The…

  16. A Note on Time Operators

    NASA Astrophysics Data System (ADS)

    Teranishi, Noriaki

    2016-09-01

    We construct a time operator of a self-adjoint operator H with finite dimensional CCR-domain. As corollaries, we show that there exists a time operator of H with infinite dimensional CCR-domain. Moreover, we construct a time operator of H with dense CCR-domain if there is a complete orthonormal systems which consists of eigenvectors of H.

  17. Inching toward an Operating Measure.

    ERIC Educational Resources Information Center

    Fischer, Mary; Gordon, Teresa P.

    2002-01-01

    Discusses what independent institutions of higher education said when surveyed about financial reporting practices and the desirability of an operating measure. Describes findings concerning who reports an operating measure, what is included as operating revenue, what is included as operating expense, how related disclosures are handled, and the…

  18. Space shuttle operations integration plan

    NASA Technical Reports Server (NTRS)

    1975-01-01

    The Operations Integration Plan is presented, which is to provide functional definition of the activities necessary to develop and integrate shuttle operating plans and facilities to support flight, flight control, and operations. It identifies the major tasks, the organizations responsible, their interrelationships, the sequence of activities and interfaces, and the resultant products related to operations integration.

  19. FUGM hardware operation manual

    SciTech Connect

    Wenz, T.R.; Menlove, H.O.; Halbig, J.K.

    1997-05-01

    This manual describes the detector design features, performance, and operating characteristics of the Fugen reactor gate monitor for monitoring fresh and spent fuel transfers between the core and storage ponds. This system consists of two monitors located at each end of the transfer chute. The larger monitor contains two {sup 3}He tubes, two fission chambers, and two ion chambers. The smaller monitor, used for direction of motion redundancy, contains two ion chambers. All detectors provide information for identifying the type, fresh or spent UOX or MOX fuel, and direction of the fuel transfer. The gamma-ray and neutron detector (GRAND-3) electronics package supplies power to the radiation sensors and collects the radiation data for storage on a laptop computer. The system is designed to operate unattended with data collection by the inspectors occurring on 90-day time intervals. This manual also includes radiation data for the six types of fuel transfers and equipment transfers along with the direction of motion information collected during the installation at the Fugen reactor.

  20. Optimizing parallel reduction operations

    SciTech Connect

    Denton, S.M.

    1995-06-01

    A parallel program consists of sets of concurrent and sequential tasks. Often, a reduction (such as array sum) sequentially combines values produced by a parallel computation. Because reductions occur so frequently in otherwise parallel programs, they are good candidates for optimization. Since reductions may introduce dependencies, most languages separate computation and reduction. The Sisal functional language is unique in that reduction is a natural consequence of loop expressions; the parallelism is implicit in the language. Unfortunately, the original language supports only seven reduction operations. To generalize these expressions, the Sisal 90 definition adds user-defined reductions at the language level. Applicable optimizations depend upon the mathematical properties of the reduction. Compilation and execution speed, synchronization overhead, memory use and maximum size influence the final implementation. This paper (1) Defines reduction syntax and compares with traditional concurrent methods; (2) Defines classes of reduction operations; (3) Develops analysis of classes for optimized concurrency; (4) Incorporates reductions into Sisal 1.2 and Sisal 90; (5) Evaluates performance and size of the implementations.

  1. Disease control operations

    USGS Publications Warehouse

    Friend, Milton; Franson, J. Christian

    1987-01-01

    Individual disease outbreaks have killed many thousands of animals on numerous occasions. Tens of thousands of migratory birds have died in single die-offs with as many as 1,000 birds succumbing in 1 day. In mammals, individual disease outbreaks have killed hundreds to thousands of animals with, for example, hemorrhagic disease in white-tailed deer, distemper in raccoon, Errington's disease in muskrat, and sylvatic plague in wild rodents. The ability to successfully combat such explosive situations is highly dependent n the readiness of field personnel to deal with them. Because many disease agents can spread though wildlife populations very fast, advance preparation is essential in preventing infected animals from spreading disease to additional species and locations. Carefully though-out disease contingency plans should be developed as practical working documents for field personnel and updated as necessary. Such well-designed plans can prove invaluable in minimizing wildlife losses and costs associated with disease control activities. Although requirements for disease control operations vary and must be tailored to each situation, all disease contingency planning involved general concepts and basic biological information. This chapter, intended as a practical guide, identifies the major activities and needs of disease control operations, and relates them to disease contingency planning.

  2. Sustainable reservoir operation

    SciTech Connect

    Smith, Brennan T; Jager, Yetta; March, Patrick

    2007-07-01

    Reservoir releases are typically operated to maximize the efficiency of hydropower production and the value of hydropower produced. In practice, ecological considerations are limited to those required by law. We first describe reservoir optimization methods that include mandated constraints on environmental and other water uses. Next, we describe research to formulate and solve reservoir optimization problems involving both energy and environmental water needs as objectives. Evaluating ecological objectives is a challenge in these problems for several reasons. First, it is difficult to predict how biological populations will respond to flow release patterns. This problem can be circumvented by using ecological models. Second, most optimization methods require complex ecological responses to flow to be quantified by a single metric, preferably a currency that can also represent hydropower benefits. Ecological valuation of instream flows can make optimization methods that require a single currency for the effects of flow on energy and river ecology possible. Third, holistic reservoir optimization problems are unlikely to be structured such that simple solution methods can be used, necessitating the use of flexible numerical methods. One strong advantage of optimal control is the ability to plan for the effects of climate change. We present ideas for developing holistic methods to the point where they can be used for real-time operation of reservoirs. We suggest that developing ecologically sound optimization tools should be a priority for hydropower in light of the increasing value placed on sustaining both the ecological and energy benefits of riverine ecosystems long into the future.

  3. Mobile marine operations structure

    SciTech Connect

    Bhalaik, A.; Braddick, P.W.; Brittin, D.S.; Johnson, G.L.

    1987-09-22

    This patent describes the process of installing a marine operations structure in a pre-determined sea floor location. The structure has a central core and a support base having at least two differently sloped ice wall surfaces for achieving fracturing of ice features, and having at least two series of circumferentially arranged ballast tanks. It consists of positioning the structure over a selected sea floor location by the use of at least three tug boats connected to the structure by tension cables arranged radially with respect to the structure; flooding a first series of lower ballast tanks in a sequential ballasting operation; flooding a second series of ballast tanks located at a higher elevation within the structure than the first series of ballast tanks; maintaining radial forces along the tension cables during the flooding steps; and after the structure has become founded on the bottom of the sea, pumping sea waver into fluid tanks some of which are located at an elevation above the water level.

  4. Distributed Operations Planning

    NASA Technical Reports Server (NTRS)

    Fox, Jason; Norris, Jeffrey; Powell, Mark; Rabe, Kenneth; Shams, Khawaja

    2007-01-01

    Maestro software provides a secure and distributed mission planning system for long-term missions in general, and the Mars Exploration Rover Mission (MER) specifically. Maestro, the successor to the Science Activity Planner, has a heavy emphasis on portability and distributed operations, and requires no data replication or expensive hardware, instead relying on a set of services functioning on JPL institutional servers. Maestro works on most current computers with network connections, including laptops. When browsing down-link data from a spacecraft, Maestro functions similarly to being on a Web browser. After authenticating the user, it connects to a database server to query an index of data products. It then contacts a Web server to download and display the actual data products. The software also includes collaboration support based upon a highly reliable messaging system. Modifications made to targets in one instance are quickly and securely transmitted to other instances of Maestro. The back end that has been developed for Maestro could benefit many future missions by reducing the cost of centralized operations system architecture.

  5. Autonomous Mission Operations Roadmap

    NASA Technical Reports Server (NTRS)

    Frank, Jeremy David

    2014-01-01

    As light time delays increase, the number of such situations in which crew autonomy is the best way to conduct the mission is expected to increase. However, there are significant open questions regarding which functions to allocate to ground and crew as the time delays increase. In situations where the ideal solution is to allocate responsibility to the crew and the vehicle, a second question arises: should the activity be the responsibility of the crew or an automated vehicle function? More specifically, we must answer the following questions: What aspects of mission operation responsibilities (Plan, Train, Fly) should be allocated to ground based or vehicle based planning, monitoring, and control in the presence of significant light-time delay between the vehicle and the Earth?How should the allocated ground based planning, monitoring, and control be distributed across the flight control team and ground system automation? How should the allocated vehicle based planning, monitoring, and control be distributed between the flight crew and onboard system automation?When during the mission should responsibility shift from flight control team to crew or from crew to vehicle, and what should the process of shifting responsibility be as the mission progresses? NASA is developing a roadmap of capabilities for Autonomous Mission Operations for human spaceflight. This presentation will describe the current state of development of this roadmap, with specific attention to in-space inspection tasks that crews might perform with minimum assistance from the ground.

  6. Operations dashboard: comparative study

    NASA Astrophysics Data System (ADS)

    Ramly, Noor Nashriq; Ismail, Ahmad Zuhairi; Aziz, Mohd Haris; Ahmad, Nurul Haszeli

    2011-10-01

    In this present days and age, there are increasing needs for companies to monitor application and infrastructure health. Apart from having proactive measures to secure their application and infrastructure, many see monitoring dashboards as crucial investment in disaster preparedness. As companies struggle to find the best solution to cater for their needs and interest for monitoring their application and infrastructure's health, this paper summarizes the studies made on several known off-the-shelf operations dashboard and in-house developed dashboard. A few criteria of good dashboard are collected from previous studies carried out by several researchers and rank them according to importance and business needs. The finalized criteria that will be discussed in later sections are data visualization, performance indicator, dashboard personalization, audit capability and alert/ notification. Comparative studies between several popular dashboards were then carried out to determine whether they met these criteria that we derived from the first exercise. The findings hopefully can be used to educate and provide an overview of selecting the best IT application and infrastructure operations dashboard that suit business needs, thus become the main contribution of this paper.

  7. TFTR initial operations

    SciTech Connect

    Young, K.M.; Bell, M.; Blanchard, W.R.; Bretz, N.; Cecchi, J.; Coonrod, J.; Davis, S.; Dylla, H.F.; Efthimion, P.C.; Fonck, R.

    1983-11-01

    The Tokamak Fusion Test Reactor (TFTR) has operated since December 1982 with ohmically heated plasmas. Routine operation with feedback control of plasma current, position, and density has been obtained for plasmas with I/sub p/ approx. = 800 kA, a = 68 cm, R = 250 cm, and B/sub t/ = 27 kG. A maximum plasma current of 1 MA was achieved with q approx. = 2.5. Energy confinement times of approx. 150 msec were measured for hydrogen and deuterium plasmas with anti n/sub e/ approx. = 2 x 10/sup 13/ cm/sup -3/, T/sub e/ (0) approx. = 1.5 keV, T/sub i/ (0) approx. = 1.5 keV, and Z/sub eff/ approx. = 3. The preliminary results suggest a size-cubed scaling from PLT and are consistent with Alcator C scaling where tau approx. nR/sup 2/a. Initial measurements of plasma disruption characteristics indicate current decay rates of approx. 800 kA in 8 ms which is within the TFTR design requirement of 3 MA in 3 ms.

  8. Optoelectronic fringe projection operations

    NASA Astrophysics Data System (ADS)

    Garavaglia, Mario; Rabal, Hector J.; Aguirre, E.

    1990-07-01

    We present a simple optoelectronical fringe projection method for topographic or deformation study of objects. Programmed positioning and repositioning can also be performed. 1. DESCRIPTION An incoherent method for fringe projection operations was recently reported'' using photographic procedures. It is extended now to real time operation using an LCD video projector and a CCD camera. Fringes consisting in Rbnchitype rulings are generated in a personal computer and projected onto an object by using a Kodak LCD colour video projector. Its image is then read by a SVHS-CCD Panasonic camera and electronically memorized. This fringe pattern contains information concerning the position and topography of the object stored as fringe phase modulation. A standard state of the object can be frozen in the screen of a monitor and its evolution deformation or misspositioning followed through the Moire between current and stored fringes. Topography of the object expressed as a mathemati cal functi on h ( x y) and its time evolution can alsO be determined from the memorized data. . Besides a conjugated grid can be generated so that when the latter is projected onto the object the observed fringes are corrected to straight lines resembling the original Ronchi rul ings i. e. distortion produced by object topography is cancelled out. Deformations with respect to this state are straightforwardly interpreted by an observer both in magnitude and sign. The system can be made

  9. Operating experience at CEBAF

    SciTech Connect

    Legg, R.

    1996-07-01

    CEBAF, the Continuous Electron Beam Accelerator Facility, is a 5-pass, recirculating, superconducting rf linac designed to provide exceptional beam quality at 4 GeV up to 200 {mu}A CW. It is made up of an injector, two 400-MeV linacs, and 9 recirculation arcs having a total beamline length of more than 4.5 km. On Nov. 5, 1995, CEBAF delivered a 4 GeV, 25-{mu}A CW electron beam to the first of 3 experimental halls and the experimental physics program was started 10 days later. Accelerator availability during the first month of the experimental run exceeded 75%. Beam properties measured in the experimental hall to date are a one sigma momentum spread of 5{times}10{sup -5} and an rms emittance of 0.2 nanometer-radians, better than design specification. CW beam has been provided from all 5 passes at 800 MeV intervals. Outstanding performance of the superconducting linacs suggests a machine energy upgrade to 6 GeV in the near term with eventual machine operation at 8-10 GeV. Results from commissioning and operations experience since the last conference are presented.

  10. RH Packaging Operations Manual

    SciTech Connect

    Washington TRU Solutions LLC

    2003-09-17

    This procedure provides operating instructions for the RH-TRU 72-B Road Cask, Waste Shipping Package. In this document, ''Packaging'' refers to the assembly of components necessary to ensure compliance with the packaging requirements (not loaded with a payload). ''Package'' refers to a Type B packaging that, with its radioactive contents, is designed to retain the integrity of its containment and shielding when subject to the normal conditions of transport and hypothetical accident test conditions set forth in 10 CFR Part 71. Loading of the RH 72-B cask can be done two ways, on the RH cask trailer in the vertical position or by removing the cask from the trailer and loading it in a facility designed for remote-handling (RH). Before loading the 72-B cask, loading procedures and changes to the loading procedures for the 72-B cask must be sent to CBFO at sitedocuments@wipp.ws for approval.

  11. Mission Operations Insights

    NASA Technical Reports Server (NTRS)

    Littman, Dave; Parksinson, Lou

    2006-01-01

    The mission description Polar Operational Environmental Satellites (POES): I) Collect and disseminate worldwide meteorological and environmental data: a) Provide day and night information (AVHRR): 1) cloud cover distribution and type; 2) cloud top temperature; 3) Moisture patterns and ice/snow melt. b) Provide vertical temperature and moisture profiles of atmospheres (HIRS, AMSU, MHS. c) Measure global ozone distribution and solar UV radiation (SBUV). d) Measure proton, electro, and charged particle density to provide solar storm warnings (SEM). d) Collect environmental data (DCS): 1) Stationary platforms in remote locations; 2) Free floating platforms on buoys, balloons, migratory animals. II) Provide Search and Rescue capabilities (SARR, SARP): a) Detection and relay of distress signals. b) Has saved thousands of lives around the world.

  12. Operations for cervical incompetence.

    PubMed

    Branch, D W

    1986-06-01

    At present, cervical cerclage is indicated in those patients with a classic history of cervical incompetence. For the majority of these patients, a postconceptional cerclage procedure is better suited because it is done after the fetus has been evaluated ultrasonographically for obvious abnormalities and after the risk for spontaneous abortion is past. The greatest experience is with the Shirodkar and the McDonald procedures; allowing for operator differences, neither appears to have an important advantage. The transabdominal cervicoisthmic cerclage may be a useful postconceptional procedure in the selected patient whose cervix is either markedly foreshortened, deeply lacerated, or infected. Preconceptional cerclages are best reserved for those rare patients in whom a markedly foreshortened incompetent cervix is associated with early second-trimester pregnancy losses (preconceptional isthmic cerclage) or in whom the cervix has a single, identifiable scar or deep laceration extending through the internal os (Lash procedure). PMID:3522005

  13. Skylab medical operational support

    NASA Technical Reports Server (NTRS)

    Primeaux, G. R.; Spross, F. R.

    1974-01-01

    To support the medical research and the maintenance of crew health during the three Skylab missions, a medical operational support team was organized. The functions of this team ranged from medical data management to medical systems engineering monitoring during the flights. The capability to expand preflight and postflight medical research and analysis was supplied through the use of the Skylab mobile laboratories. These mobile laboratories were not only capable of being transported to the recovery ship for postflight use, but also served as a preflight test area for gathering crewman baseline data. The laboratories contained experiment hardware identical to that of the flight orbital workshop and a laboratory diagnostic facility that duplicated many of the capabilities of ground-based clinical laboratories.

  14. FRMAC Operations Manual

    SciTech Connect

    Frandsen, K.

    2010-05-01

    In the event of a major radiological incident, the Federal Radiological Monitoring and Assessment Center (FRMAC) will coordinate the federal agencies that have various statutory responsibilities. The FRMAC is responsible for coordinating all environmental radiological monitoring, sampling, and assessment activities for the response. This manual describes the FRMAC’s response activities in a radiological incident. It also outlines how FRMAC fits in the National Incident Management System (NIMS) under the National Response Framework (NRF) and describes the federal assets and subsequent operational activities which provide federal radiological monitoring and assessment of the affected areas. In the event of a potential or existing major radiological incident, the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) is responsible for establishing and managing the FRMAC during the initial phases.

  15. Operations planning with VERT.

    PubMed

    Moeller, G L; Digman, L A

    1981-01-01

    The Venture Evaluation and Review Technique (VERT) is a computerized, mathematically oriented network-based simulation technique designed to analyze risk existing in three parameters of most concern to managers in new projects or ventures--time, cost, and performance. As such, the VERT technique is more powerful than techniques such as GERT, which are basically time and cost oriented. VERT has been successfully utilized to assess the risks involved in new ventures and projects, in the estimation of future capital requirements, in control monitoring, and in the overall evaluation of ongoing projects, programs, and systems. It has been helpful to management in cases where there is a requirement to make decisions with incomplete or inadequate information about the alternatives. An example describing the application of VERT to an operational planning problem--the evaluation of electric power generating methods--is illustrated.

  16. Designing the Operative Suite

    PubMed Central

    Agnew, G. Harvey

    1965-01-01

    The planning of an operative suite involves many considerations, often of a highly technical nature. Requirements have become so diversified and have been elaborated so rapidly that standardization of requirements cannot be anticipated. The concept of grouping interdependent departments has brought the suite down to lower floors. Rooms have become larger to accommodate more monitoring and other equipment, and many more ancillary rooms have been found necessary. A wide wing with double or peripheral corridors is preferable. Air sterilization can be achieved by several methods. The doctors' dressing room is often a danger point in bacterial control and needs redesigning. Patient monitoring is increasing and some features can be built in. TV observation and teaching have tremendous potential but have not been adopted as widely as was anticipated some years ago. If a department needs extensive enlargement, it is much more satisfactory and usually cheaper to construct a new suite in another location. PMID:5843868

  17. Flight Operations Analysis Tool

    NASA Technical Reports Server (NTRS)

    Easter, Robert; Herrell, Linda; Pomphrey, Richard; Chase, James; Wertz Chen, Julie; Smith, Jeffrey; Carter, Rebecca

    2006-01-01

    Flight Operations Analysis Tool (FLOAT) is a computer program that partly automates the process of assessing the benefits of planning spacecraft missions to incorporate various combinations of launch vehicles and payloads. Designed primarily for use by an experienced systems engineer, FLOAT makes it possible to perform a preliminary analysis of trade-offs and costs of a proposed mission in days, whereas previously, such an analysis typically lasted months. FLOAT surveys a variety of prior missions by querying data from authoritative NASA sources pertaining to 20 to 30 mission and interface parameters that define space missions. FLOAT provides automated, flexible means for comparing the parameters to determine compatibility or the lack thereof among payloads, spacecraft, and launch vehicles, and for displaying the results of such comparisons. Sparseness, typical of the data available for analysis, does not confound this software. FLOAT effects an iterative process that identifies modifications of parameters that could render compatible an otherwise incompatible mission set.

  18. MAVEN Relay Operations Concept

    NASA Technical Reports Server (NTRS)

    Chamberlain, Neil; Gladden, Roy; Bruvold, Kris

    2012-01-01

    The Mars Atmosphere and Volatile EvolutioN (MAVEN) mission will launch in late 2013 and following a 10 month cruise to Mars, will study the upper atmosphere of the planet. In addition to the science instruments, the MAVEN spacecraft is equipped with an Electra UHF transceiver to support relay communication with landed assets. This paper describes how UHF relay service is provisioned by MAVEN. The discussion includes a description of the Electra payload, the process by which relay activities are coordinated and accounted for, the process of a typical relay session, including uplink and downlink, as well as special commands to calibrate and verify relay performance. The operational processes for providing these services are inherited largely from prior Mars missions and take advantage of existing infrastructure and lessons learned from those missions. Preliminary data volume return capabilities using adaptive data rates and low-density parity check channel coding are presented.

  19. Pyrolaser Operating System

    NASA Technical Reports Server (NTRS)

    Roberts, Floyd E., III

    1994-01-01

    Software provides for control and acquisition of data from optical pyrometer. There are six individual programs in PYROLASER package. Provides quick and easy way to set up, control, and program standard Pyrolaser. Temperature and emisivity measurements either collected as if Pyrolaser in manual operating mode or displayed on real-time strip charts and stored in standard spreadsheet format for posttest analysis. Shell supplied to allow macros, which are test-specific, added to system easily. Written using Labview software for use on Macintosh-series computers running System 6.0.3 or later, Sun Sparc-series computers running Open-Windows 3.0 or MIT's X Window System (X11R4 or X11R5), and IBM PC or compatible computers running Microsoft Windows 3.1 or later.

  20. Small operator outwits recession

    SciTech Connect

    Jackson, D.

    1982-12-01

    Explains how Rockcastle, Inc., one of the smallest surface coal mine operators in the West, maintains production during the recession by concentrating on short-term contracts and spot sales to industrial and commercial users. The mining company has selected well established coal brokers to market its product to users such as sugar beet and cement plants, a brewery, steel mill, utility, and a molybdenum mill. Rockcastle produces, on a two-shift schedule, about 1,200 tpd of coal with a total workforce of 20, or approximately 30 tons per manshift. A fleet of 4 scrapers, with dozer-assist in most cases, is capable of removing 5,000 to 6,000 cu yd of overburden and interburden per shift.

  1. REMOTELY OPERATED MANIPULATOR

    DOEpatents

    Hutto, E.L.

    1961-08-15

    A manipulator is described for performing, within an entirely enclosed cell containling radioactive materials, various mechanical operations. A rod with flexible fingers is encompassed by a tubular sleeve shorter than the rod. Relative movement between the rod and sleeve causes the fingers to open and close. This relative movement is effected by relative movement of permanent magnets in magnetic coupling relation to magnetic followers affixed to the ends of the rod and sleeve. The rod and its sleeve may be moved as a unit axially or may be rotated by means of the magnetic couplings. The manipulator is enclosed within a tubular member which is flexibly sealed to an opening in the cell. (AEC)

  2. RHIC Polarized proton operation

    SciTech Connect

    Huang, H.; Ahrens, L.; Alekseev, I.G.; Aschenauer, E.; Atoian, G.; Bai, M.; Bazilevsky, A.; Blaskiewicz, M.; Brennan, J.M.; Brown, K.A.; Bruno, D.; Connolly, R.; Dion, A.; D'Ottavio, T.; Drees, K.A.; Fischer, W.; Gardner, C.; Glenn, J.W.; Gu, X.; Harvey, M.; Hayes, T.; Hoff, L.; Hulsart, R.L.; Laster, J.; Liu, C.; Luo, Y.; MacKay, W.W.; Makdisi, Y.; Marr, G.J.; Marusic, A.; Meot, F.; Mernick, K.; Michnoff, R,; Minty, M.; Montag, C.; Morris, J.; Nemesure, S.; Poblaguev, A.; Ptitsyn, V.; Ranjibar, V.; Robert-Demolaize, G.; Roser, T.; J.; Severino, F.; Schmidke, B.; Schoefer, V.; Severino, F.; Smirnov, D.; Smith, K.; Steski, D.; Svirida, D.; Tepikian, S.; Trbojevic, D.; Tsoupas, N.; Tuozzolo, J. Wang, G.; Wilinski, M.; Yip, K.; Zaltsman, A.; Zelenski, A.; Zeno, K.; Zhang, S.Y.

    2011-03-28

    The Relativistic Heavy Ion Collider (RHIC) operation as the polarized proton collider presents unique challenges since both luminosity(L) and spin polarization(P) are important. With longitudinally polarized beams at the experiments, the figure of merit is LP{sup 4}. A lot of upgrades and modifications have been made since last polarized proton operation. A 9 MHz rf system is installed to improve longitudinal match at injection and to increase luminosity. The beam dump was upgraded to increase bunch intensity. A vertical survey of RHIC was performed before the run to get better magnet alignment. The orbit control is also improved this year. Additional efforts are put in to improve source polarization and AGS polarization transfer efficiency. To preserve polarization on the ramp, a new working point is chosen such that the vertical tune is near a third order resonance. The overview of the changes and the operation results are presented in this paper. Siberian snakes are essential tools to preserve polarization when accelerating polarized beams to higher energy. At the same time, the higher order resonances still can cause polarization loss. As seen in RHIC, the betatron tune has to be carefully set and maintained on the ramp and during the store to avoid polarization loss. In addition, the orbit control is also critical to preserve polarization. The higher polarization during this run comes from several improvements over last run. First we have a much better orbit on the ramp. The orbit feedback brings down the vertical rms orbit error to 0.1mm, much better than the 0.5mm last run. With correct BPM offset and vertical realignment, this rms orbit error is indeed small. Second, the jump quads in the AGS improved input polarization for RHIC. Third, the vertical tune was pushed further away from 7/10 snake resonance. The tune feedback maintained the tune at the desired value through the ramp. To calibrate the analyzing power of RHIC polarimeters at any energy above

  3. Integrated Airport Surface Operations

    NASA Technical Reports Server (NTRS)

    Koczo, S.

    1998-01-01

    The current air traffic environment in airport terminal areas experiences substantial delays when weather conditions deteriorate to Instrument Meteorological Conditions (IMC). Research activity at NASA has culminated in the development, flight test and demonstration of a prototype Low Visibility Landing and Surface Operations (LVLASO) system. A NASA led industry team and the FAA developed the system which integrated airport surface surveillance systems, aeronautical data links, DGPS navigation, automation systems, and controller and flight deck displays. The LVLASO system was demonstrated at the Hartsfield-Atlanta International Airport using a Boeing 757-200 aircraft during August, 1997. This report documents the contractors role in this testing particularly in the area of data link and DGPS navigation.

  4. Gulf operations still recovering

    SciTech Connect

    Koen, A.D.

    1992-09-21

    This paper reports that reports of damage caused by Hurricane Andrew were leveling off last week at the U.S. Minerals Management Service as Gulf of Mexico operators pressed ahead with repairs. The hurricane struck South Florida Aug. 4, churned west into the gulf, then swung north and hit the South Louisiana coast Aug. 5. By the close of business Sept. 8 MMS had received damage reports covering 83 pipeline segments and 193 platforms and satellite installations. MMS last week estimated about 500 MMcfd of gas production had been restored in the gulf and 100,000-150,000 b/d of oil. Production still lost as a result of Andrew was estimated at 2-2.5 bcfd of gas and 90,000-120 b/d of oil. MMS estimates Gulf of Mexico wells before the storm were producing about 12.5-13 bcfd of gas and 750,000 b/d of oil.

  5. Gulf operators resuming production

    SciTech Connect

    Koen, A.D.

    1992-09-14

    This paper reports that Gulf of Mexico operators last week were gradually restoring production at installations struck by Hurricane Andrew. The Minerals Management Service continued receiving reports of more damage. By the end of the day Sept. 8, MMS had received reports of damage to 83 pipeline segments and 193 platforms and satellite installations. Damage reports listed 112 installations with structural damage, 13 platforms toppled and five leaning, and 30 satellite platforms toppled and 33 leaning. But despite the extent of damage the storm inflicted on oil and gas installations in the gulf, it pales in comparison to the misery and suffering the storm caused in Florida and Louisiana, an oil company official said.

  6. Environmental calibration chamber operations

    NASA Technical Reports Server (NTRS)

    Lester, D. L.

    1988-01-01

    Thermal vacuum capabilities are provided for the development, calibration, and functional operation checks of flight sensors, sources, and laboratory and field instruments. Two systems are available. The first is a 46 cm diameter diffusion pumped vacuum chambler of the bell jar variety. It has an internal thermal shroud, LN2 old trap, two viewing ports, and various electrical and fluid feedthroughs. The other, also an oil diffusion pumped system, consists of a 1.8 m diameter by 2.5 m long stainless steel vacuum tank, associated pumping and control equipment, a liquid nitrogen storage and transfer system and internal IR/visible calibration sources. This is a two story system with the chamber located on one floor and the pumping/cryogenic systems located on the floor below.

  7. KEPLER SCIENCE OPERATIONS

    SciTech Connect

    Haas, Michael R.; Bryson, Steve T.; Dotson, Jessie L.; Koch, David G.; Smith, Marcie; Sobeck, Charles K.; Batalha, Natalie M.; Stober, Jeremy

    2010-04-20

    Kepler's mission design includes a comprehensive plan for commissioning and science operations. The commissioning phase completed all critical tasks and accomplished all mission objectives within a week of the pre-launch plan. Since the start of science data collection, the nominal timeline has been interrupted by two safe-mode events, several losses of fine point, and some small pointing adjustments. The most important anomalies are understood and mitigated, so Kepler's technical performance has improved significantly over this period, and the prognosis for mission success is excellent. The Kepler data archive is established and hosting data for the science team, guest observers, and the public. The first data to become publicly available include the monthly full-frame images and the light curves for targets that are dropped from the exoplanet program or released after publication. Data are placed in the archive on a quarterly basis; the Kepler Results Catalog will be released annually starting in 2011.

  8. Fluid-operated piston

    SciTech Connect

    Ledermen, F.E.

    1987-01-13

    An improvement is described in a friction torque transmitting device having a piston slidably disposed in a cylinder and being selectively pressurized therein for controlling the engagement of frictional plates. The improvement comprises: a rigid piston body generally U-shaped in cross section; an elastomeric covering portion bonded on the piston body and incorporating therein a pair of lip seal portions for engaging the cylinder and cooperating therewith to form a fluid tight joint; valve means formed in the bonded portion for permitting air bleed from the cylinder; a reaction ring bonded to the elastomeric covering; and a spring portion integral with the elastomeric portion operatively disposed between the piston body and the reaction ring.

  9. Operator product expansion algebra

    SciTech Connect

    Holland, Jan; Hollands, Stefan

    2013-07-15

    We establish conceptually important properties of the operator product expansion (OPE) in the context of perturbative, Euclidean φ{sup 4}-quantum field theory. First, we demonstrate, generalizing earlier results and techniques of hep-th/1105.3375, that the 3-point OPE, =Σ{sub C}C{sub A{sub 1A{sub 2A{sub 3}{sup C}}}}, usually interpreted only as an asymptotic short distance expansion, actually converges at finite, and even large, distances. We further show that the factorization identity C{sub A{sub 1A{sub 2A{sub 3}{sup B}}}}=Σ{sub C}C{sub A{sub 1A{sub 2}{sup C}}}C{sub CA{sub 3}{sup B}} is satisfied for suitable configurations of the spacetime arguments. Again, the infinite sum is shown to be convergent. Our proofs rely on explicit bounds on the remainders of these expansions, obtained using refined versions, mostly due to Kopper et al., of the renormalization group flow equation method. These bounds also establish that each OPE coefficient is a real analytic function in the spacetime arguments for non-coinciding points. Our results hold for arbitrary but finite loop orders. They lend support to proposals for a general axiomatic framework of quantum field theory, based on such “consistency conditions” and akin to vertex operator algebras, wherein the OPE is promoted to the defining structure of the theory.

  10. Motor-operated gearbox efficiency

    SciTech Connect

    DeWall, K.G.; Watkins, J.C.; Bramwell, D.; Weidenhamer, G.H.

    1996-12-01

    Researchers at the Idaho National Engineering Laboratory recently conducted tests investigating the operating efficiency of the power train (gearbox) in motor-operators typically used in nuclear power plants to power motor-operated valves. Actual efficiency ratios were determined from in-line measurements of electric motor torque (input to the operator gearbox) and valve stem torque (output from the gearbox) while the operators were subjected to gradually increasing loads until the electric motor stalled. The testing included parametric studies under reduced voltage and elevated temperature conditions. As part of the analysis of the results, the authors compared efficiency values determined from testing to the values published by the operator manufacturer and typically used by the industry in calculations for estimating motor-operator capabilities. The operators they tested under load ran at efficiencies lower than the running efficiency (typically 50%) published by the operator manufacturer.

  11. Interior detail view of operator's house, showing operator's switchboard ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior detail view of operator's house, showing operator's switchboard - Old Young's Bay Bridge, Spanning Young's Bay at Milepoint 6.89 on Warrenton-Astoria Highway (Highway No. 9), Astoria, Clatsop County, OR

  12. CxP Medical Operations Concept of Operations (CONOPS)

    NASA Technical Reports Server (NTRS)

    Scheuring, Richard A.

    2010-01-01

    This slide presentation reviews the planned medical operations for manned missions to the Moon and Mars as outlined in the Constellation program. Many of the issues involving the medical operations are examined.

  13. 12. VIEW OF REMOTELY OPERATED EQUIPMENT. OPERATORS VIEWED THE EQUIPMENT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. VIEW OF REMOTELY OPERATED EQUIPMENT. OPERATORS VIEWED THE EQUIPMENT THROUGH A WATER-FILLED WINDOW. (10/8/81) - Rocky Flats Plant, Plutonium Recovery Facility, Northwest portion of Rocky Flats Plant, Golden, Jefferson County, CO

  14. 16. INTERIOR, BRIDGE OPERATING CONTROLS IN OPERATOR'S HOUSE New ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. INTERIOR, BRIDGE OPERATING CONTROLS IN OPERATOR'S HOUSE - New York, New Haven & Hartford Railroad, Niantic Bridge, Spanning Niantic River between East Lyme & Waterford, Old Lyme, New London County, CT

  15. 47 CFR 80.1009 - Principal operator and operating position.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ....1009 Section 80.1009 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Radiotelephone Installations Required by the Bridge-to-Bridge Act § 80.1009 Principal operator and operating position. The principal operating position of...

  16. 47 CFR 80.1009 - Principal operator and operating position.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ....1009 Section 80.1009 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Radiotelephone Installations Required by the Bridge-to-Bridge Act § 80.1009 Principal operator and operating position. The principal operating position of...

  17. 47 CFR 80.1009 - Principal operator and operating position.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ....1009 Section 80.1009 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Radiotelephone Installations Required by the Bridge-to-Bridge Act § 80.1009 Principal operator and operating position. The principal operating position of...

  18. 47 CFR 80.1009 - Principal operator and operating position.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ....1009 Section 80.1009 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Radiotelephone Installations Required by the Bridge-to-Bridge Act § 80.1009 Principal operator and operating position. The principal operating position of...

  19. 47 CFR 80.1009 - Principal operator and operating position.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ....1009 Section 80.1009 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Radiotelephone Installations Required by the Bridge-to-Bridge Act § 80.1009 Principal operator and operating position. The principal operating position of...

  20. SOHO Resumes Full Operation

    NASA Astrophysics Data System (ADS)

    2003-07-01

    SOHO orbit hi-res Size hi-res: 324 kb Credits: SOHO (ESA & NASA) SOHO orbit Because of its static position, every three months the high-gain antenna loses sight of Earth. During this time, engineers will rotate the spacecraft by 180 degrees to regain full contact a few days later. Since 19 June 2003, SOHO's high-gain antenna (HGA), which transmits high-speed data to Earth, has been fixed in position following the discovery of a malfunction in its pointing mechanism. This resulted in a loss of signal through SOHO's usual 26-metre ground stations on 27 June 2003. However, 34-metre radio dishes continued to receive high-speed transmissions from the HGA until 1 July 2003. Since then, astronomers have been relying primarily on a slower transmission rate signal, sent through SOHO's backup antenna. It can be picked up whenever a 34-metre dish is available. However, this signal could not transmit all of SOHO's data. Some data was recorded on board, however, and downloaded using high-speed transmissions through the backup antenna when time on the largest, 70-metre dishes could be spared. SOHO itself orbits a point in space, 1.5 million kilometres closer to the Sun than the Earth, once every 6 months. To reorient the HGA for the next half of this orbit, engineers rolled the spacecraft through a half-circle on 8 July 2003. On 10 July, the 34-metre radio dish in Madrid re-established contact with SOHO's HGA. Then on the morning of 14 July 2003, normal operations with the spacecraft resumed through its usual 26-metre ground stations, as predicted. With the HGA now static, the blackouts, lasting between 9 and 16 days, will continue to occur every 3 months. Engineers will rotate SOHO by 180 degrees every time this occurs. This manoeuvre will minimise data losses. Stein Haugan, acting SOHO project scientist, says "It is good to welcome SOHO back to normal operations, as it proves that we have a good understanding of the situation and can confidently work around it."

  1. The LSST operations simulator

    NASA Astrophysics Data System (ADS)

    Delgado, Francisco; Saha, Abhijit; Chandrasekharan, Srinivasan; Cook, Kem; Petry, Catherine; Ridgway, Stephen

    2014-08-01

    The Operations Simulator for the Large Synoptic Survey Telescope (LSST; http://www.lsst.org) allows the planning of LSST observations that obey explicit science driven observing specifications, patterns, schema, and priorities, while optimizing against the constraints placed by design-specific opto-mechanical system performance of the telescope facility, site specific conditions as well as additional scheduled and unscheduled downtime. It has a detailed model to simulate the external conditions with real weather history data from the site, a fully parameterized kinematic model for the internal conditions of the telescope, camera and dome, and serves as a prototype for an automatic scheduler for the real time survey operations with LSST. The Simulator is a critical tool that has been key since very early in the project, to help validate the design parameters of the observatory against the science requirements and the goals from specific science programs. A simulation run records the characteristics of all observations (e.g., epoch, sky position, seeing, sky brightness) in a MySQL database, which can be queried for any desired purpose. Derivative information digests of the observing history are made with an analysis package called Simulation Survey Tools for Analysis and Reporting (SSTAR). Merit functions and metrics have been designed to examine how suitable a specific simulation run is for several different science applications. Software to efficiently compare the efficacy of different survey strategies for a wide variety of science applications using such a growing set of metrics is under development. A recent restructuring of the code allows us to a) use "look-ahead" strategies that avoid cadence sequences that cannot be completed due to observing constraints; and b) examine alternate optimization strategies, so that the most efficient scheduling algorithm(s) can be identified and used: even few-percent efficiency gains will create substantive scientific

  2. Advanced Operating System Technologies

    NASA Astrophysics Data System (ADS)

    Cittolin, Sergio; Riccardi, Fabio; Vascotto, Sandro

    In this paper we describe an R&D effort to define an OS architecture suitable for the requirements of the Data Acquisition and Control of an LHC experiment. Large distributed computing systems are foreseen to be the core part of the DAQ and Control system of the future LHC experiments. Neworks of thousands of processors, handling dataflows of several gigaBytes per second, with very strict timing constraints (microseconds), will become a common experience in the following years. Problems like distributyed scheduling, real-time communication protocols, failure-tolerance, distributed monitoring and debugging will have to be faced. A solid software infrastructure will be required to manage this very complicared environment, and at this moment neither CERN has the necessary expertise to build it, nor any similar commercial implementation exists. Fortunately these problems are not unique to the particle and high energy physics experiments, and the current research work in the distributed systems field, especially in the distributed operating systems area, is trying to address many of the above mentioned issues. The world that we are going to face in the next ten years will be quite different and surely much more interconnected than the one we see now. Very ambitious projects exist, planning to link towns, nations and the world in a single "Data Highway". Teleconferencing, Video on Demend, Distributed Multimedia Applications are just a few examples of the very demanding tasks to which the computer industry is committing itself. This projects are triggering a great research effort in the distributed, real-time micro-kernel based operating systems field and in the software enginering areas. The purpose of our group is to collect the outcame of these different research efforts, and to establish a working environment where the different ideas and techniques can be tested, evaluated and possibly extended, to address the requirements of a DAQ and Control System suitable for LHC

  3. Web Operational Status Boards

    2004-04-16

    Web Operational Status Boards (WebOSB)is a web-based application designed to acquire, display, and update highly dynamic status information between multiple users and jurisdictions. WebOSB is able to disseminate real-time status information—support the timely sharing of information—with constant, dynamic updates via personal computers and the Internet between emergency operations centers (EOCs), incident command centers, and to users outside the EOC who need to know the information (hospitals, shelters, schools). The WebOSB application far exceeds outdated information-sharingmore » methods used by emergency workers: whiteboards, Word and Excel documents, or even locality-specific Web sites. WebOSB’s capabilities include the following elements: - Secure access. Multiple users can access information on WebOSB from any personal computer with Internet access and a secure ID. Privileges are use to control access and distribution of status information and to identify users who are authorized to add or edit information. - Simultaneous update. WebOSB provides options for users to add, display, and update dynamic information simultaneously at all locations involved in the emergency management effort, A single status board can be updated from multiple locations enabling shelters and hospitals to post bed availability or list decontamination capability. - On-the-fly modification. Allowing the definition of an existing status board to be modified on-the-fly can be an asset during an emergency, where information requirements can change quickly. The status board designer feature allows an administrator to quickly define, modi,, add to, and implement new status boards in minutes without needing the help of Web designers and computer programmers. - Publisher/subscriber notification. As a subscriber, each user automatically receives notification of any new information relating to specific status boards. The publisher/subscriber feature automatically notified each user of any

  4. Actuator operated microvalves

    NASA Technical Reports Server (NTRS)

    Okojie, Robert S. (Inventor)

    2008-01-01

    An actuator operated microvalve and the method of making same is disclosed and claimed. The microvalve comprises a SiC housing which includes a first lower portion and a second upper portion. The lower portion of the SiC housing includes a passageway therethrough, a microvalve seat, and a moveable SiC diaphragm. The SiC diaphragm includes a centrally located boss and radially extending corrugations which may be sinusoidally shaped. The boss of the SiC diaphragm moves and modulates in a range of positions between a closed position wherein the boss interengages said microvalve seat prohibiting communication of fluid through the passageway and a fully open position when the boss is spaced apart from the seat at its maximum permitting communication of fluid through said passageway. The actuator includes a SiC top plate affixed to the boss of the diaphragm and a first electrode and the second upper portion of the SiC housing further includes a second electrode.

  5. Operational Dust Prediction

    NASA Technical Reports Server (NTRS)

    Benedetti, Angela; Baldasano, Jose M.; Basart, Sara; Benincasa, Francesco; Boucher, Olivier; Brooks, Malcolm E.; Chen, Jen-Ping; Colarco, Peter R.; Gong, Sunlin; Huneeus, Nicolas; Jones, Luke; Lu, Sarah; Menut, Laurent; Morcrette, Jean-Jacques; Mulcahy, Jane; Nickovic, Slobodan; Garcia-Pando, Carlos P.; Reid, Jeffrey S.; Sekiyama, Thomas T.; Tanaka, Taichu Y.; Terradellas, Enric; Westphal, Douglas L.; Zhang, Xiao-Ye; Zhou, Chun-Hong

    2014-01-01

    Over the last few years, numerical prediction of dust aerosol concentration has become prominent at several research and operational weather centres due to growing interest from diverse stakeholders, such as solar energy plant managers, health professionals, aviation and military authorities and policymakers. Dust prediction in numerical weather prediction-type models faces a number of challenges owing to the complexity of the system. At the centre of the problem is the vast range of scales required to fully account for all of the physical processes related to dust. Another limiting factor is the paucity of suitable dust observations available for model, evaluation and assimilation. This chapter discusses in detail numerical prediction of dust with examples from systems that are currently providing dust forecasts in near real-time or are part of international efforts to establish daily provision of dust forecasts based on multi-model ensembles. The various models are introduced and described along with an overview on the importance of dust prediction activities and a historical perspective. Assimilation and evaluation aspects in dust prediction are also discussed.

  6. Operation Deep Sweep

    NASA Astrophysics Data System (ADS)

    Bell, Peter M.

    Fifty scientists and a crew of 18 have embarked on a 64,000 km odyssey to explore the Pacific from pole to pole—the most ambitious program in the history of the marine geology branch of the U.S. Geological Survey (USGS). Called Operation Deep Sweep, the 1-year cruise will search areas above the Arctic Circle, off of Alaska, to McMurdo Sound in Antarctica. The 63-m, 1,300-tonne research vessel Samuel P. Lee sailed from its home port of Redwood City, Calif., to San Francisco to begin the first leg of the lengthy journey.According to USGS officials and the cosponsoring Circum-Pacific Council for Energy and Mineral Resources of the American Association of Petroleum Geologists, the cruise will ultimately involve 150 scientists, some of them representing Germany, France, Australia, and New Zealand. David Howell, branch chief of Pacific Marine Geology for the USGS, said the voyage of the Lee was “the most far reaching and of the longest duration” ever attempted by his unit. He said the cruise would string together a large number of scientific experiments spanning the Pacific. Howell likened the voyage to the Lewis and Clark Expedition of 1803-1806 (which explored Louisiana and the western United States) because “we're going into unknown territory and into regions not studied except in the most cursory manner.”

  7. Mobile marine operations structure

    SciTech Connect

    Bhalaik, A.; Braddick, P.W.; Brittin, D.S.; Johnson, G.L.

    1988-02-16

    The process of fabricating a marine operations structure having a central core and first and second ice walls circumferentially positioned about the central core for fracturing ice features, with the second ice wall above and contiguous with the first ice wall, wherein the first and second ice walls are constructed according to the process is described comprising the steps of: providing a sloping support base system comprising radial bulkheads and circumferentially-positioned web frame series integrally connecting ice wall plating to the bulkheads and web frames series; integrally affixing an exposed cross grid system of interlocking and reinforcing members to the exterior surfaces of the ice wall plating to form first and second ice wall preforms with the members projecting outward from the plating; installing a slip-form adjacent to the ice wall preforms and exteriorly of the plating; pouring cement/aggregate slurry onto the ice wall preforms between the plating and the slip-form to cover the cross grid of interlocking and reinforcing members; moving the slip-form upwards as the void spaces between the slip-form and the ice wall plating are filled with cement/aggregate slurry; and permitting the cement/aggregate slurry to harden to form an orthotropic composite steel/concrete ice wall with an exposed concrete surface.

  8. Bevalac operations update

    SciTech Connect

    Not Available

    1991-02-01

    The Bevalac passed the recent Tiger Team assessment with flying colors, thanks to the unremitting effort of countless people over the last several months, pulling miles of cables, sending tons of valuable'' junk to salvage, painting, pushing brooms, writing operating procedures. It is time to look ahead now and plan for doing science again; however, it is not business as usual. The Bevalac survived, but not without changes. There are more procedures to be followed, safety appraisals to be made, training to be gone through. The primary goal is not just to get a task done, but to get it done in a safe manner according to code. If this means a delay in a run because enough time wasn't allotted for making a change in the setup, then the experiment will be delayed. Many of the obvious changes you will find the next time you come to work here are summarized in this newsletter. We will inform you of others as they are forthcoming. Also we will discuss these changes at our We Survived the Tigers, but{hor ellipsis}'' Users' Information Meeting at the Washington APS meeting. Details are inside this report.

  9. SHEBA operating experience

    SciTech Connect

    Cappiello, C.C.; Butterfield, K.B.

    1997-05-01

    The Solution High Energy Burst Assembly (SHEBA) is a critical assembly fueled with a solution of 5% enriched Uranyl Fluoride, U(5%)O{sub 2}F{sub 2}. The fuel is stored in critically safe storage containers and then pumped into the ``Critical Assembly Vessel`` where the solution becomes critical. The system was designed to achieve criticality in a cylindrically symmetric configuration. The SHEBA facility also incorporates a shielding pit into which the entire assembly can be lowered to provide shielding for elevated power runs. The major goals of the SHEBA assembly project are to study the behavior of nuclear excursions in a low-enrichment solution, to evaluate accidental criticality alarm detectors for fuel-processing facilities, to provide radiation spectra and dose measurements to benchmark calculations on a low-enrichment solution system, and to provide radiation fields to calibrate personnel dosimetry. SHEBA is also being used to provide a neutron flux test bed to benchmark calculations. Rather than providing the details of these particular projects, this paper summarizes the free-run operating experience obtained as a result of the projects.

  10. Aircraft Operations Classification System

    NASA Technical Reports Server (NTRS)

    Harlow, Charles; Zhu, Weihong

    2001-01-01

    Accurate data is important in the aviation planning process. In this project we consider systems for measuring aircraft activity at airports. This would include determining the type of aircraft such as jet, helicopter, single engine, and multiengine propeller. Some of the issues involved in deploying technologies for monitoring aircraft operations are cost, reliability, and accuracy. In addition, the system must be field portable and acceptable at airports. A comparison of technologies was conducted and it was decided that an aircraft monitoring system should be based upon acoustic technology. A multimedia relational database was established for the study. The information contained in the database consists of airport information, runway information, acoustic records, photographic records, a description of the event (takeoff, landing), aircraft type, and environmental information. We extracted features from the time signal and the frequency content of the signal. A multi-layer feed-forward neural network was chosen as the classifier. Training and testing results were obtained. We were able to obtain classification results of over 90 percent for training and testing for takeoff events.

  11. The Bender-Dunne basis operators as Hilbert space operators

    SciTech Connect

    Bunao, Joseph; Galapon, Eric A. E-mail: eric.galapon@upd.edu.ph

    2014-02-15

    The Bender-Dunne basis operators, T{sub −m,n}=2{sup −n}∑{sub k=0}{sup n}(n/k )q{sup k}p{sup −m}q{sup n−k} where q and p are the position and momentum operators, respectively, are formal integral operators in position representation in the entire real line R for positive integers n and m. We show, by explicit construction of a dense domain, that the operators T{sub −m,n}'s are densely defined operators in the Hilbert space L{sup 2}(R)

  12. MOP /Matrix Operation Programs system/

    NASA Technical Reports Server (NTRS)

    Muller, P. M.

    1968-01-01

    MOP /Matrix Operation Programs/ system consists of a set of FORTRAN 4 subroutines which are related through a small common allocation. The system accomplishes all matrix algebra operations plus related input-output and housekeeping details.

  13. Operator Training: Who Is Responsible?

    ERIC Educational Resources Information Center

    Wubbena, Robert L.

    1979-01-01

    Summarized are the findings of a study to identify and correct water pollution control operator training deficiencies. Several models are presented to aid in developing a coordinated delivery system for operator training and certification. (CS)

  14. Baryonic Operators for Lattice Simulations

    SciTech Connect

    R. Edwards; R. Fiebig; G. Fleming; U.M. Heller; C. Morningstar; D. Richards; I. Sato; S. Wallace

    2004-03-01

    The construction of baryonic operators for determining the N* excitation spectrum is discussed. The operators are designed with one eye towards maximizing overlaps with the low-lying states of interest, and the other eye towards minimizing the number of sources needed in computing the required quark propagators. Issues related to spin identification are outlined. Although we focus on tri-quark baryon operators, the construction method is applicable to both mesons and penta-quark operators.

  15. Dynamics of Double Stochastic Operators

    NASA Astrophysics Data System (ADS)

    Saburov, Mansoor

    2016-03-01

    A double stochastic operator is a generalization of a double stochastic matrix. In this paper, we study the dynamics of double stochastic operators. We give a criterion for a regularity of a double stochastic operator in terms of absences of its periodic points. We provide some examples to insure that, in general, a trajectory of a double stochastic operator may converge to any interior point of the simplex.

  16. Remote Science Operation Center research

    NASA Technical Reports Server (NTRS)

    Banks, P. M.

    1986-01-01

    Progress in the following areas is discussed: the design, planning and operation of a remote science payload operations control center; design and planning of a data link via satellite; and the design and prototyping of an advanced workstation environment for multi-media (3-D computer aided design/computer aided engineering, voice, video, text) communications and operations.

  17. Operant Variability: A Conceptual Analysis

    ERIC Educational Resources Information Center

    Barba, Lourenco de Souza

    2012-01-01

    Some researchers claim that variability is an operant dimension of behavior. The present paper reviews the concept of operant behavior and emphasizes that differentiation is the behavioral process that demonstrates an operant relation. Differentiation is conceived as change in the overlap between two probability distributions: the distribution of…

  18. Operant Variability: Some Random Thoughts

    ERIC Educational Resources Information Center

    Marr, M. Jackson

    2012-01-01

    Barba's (2012) paper is a serious and thoughtful analysis of a vexing problem in behavior analysis: Just what should count as an operant class and how do people know? The slippery issue of a "generalized operant" or functional response class illustrates one aspect of this problem, and "variation" or "novelty" as an operant appears to fall into…

  19. Operant Conditioning for Special Educators.

    ERIC Educational Resources Information Center

    Pedrini, Bonnie C.; Pedrini, D. T.

    The paper briefly explains operant conditioning as it pertains to special educators. Operant conditioning is thought to be an efficient method for modifying student behavior. Using the B. F. Skinner frame of reference, operant conditioning is said to include behavior modification and therapy, programed instruction, and computer assisted and…

  20. Operant Variability: Procedures and Processes

    ERIC Educational Resources Information Center

    Machado, Armando; Tonneau, Francois

    2012-01-01

    Barba's (2012) article deftly weaves three main themes in one argument about operant variability. From general theoretical considerations on operant behavior (Catania, 1973), Barba derives methodological guidelines about response differentiation and applies them to the study of operant variability. In the process, he uncovers unnoticed features of…

  1. Waste Water Plant Operators Manual.

    ERIC Educational Resources Information Center

    Washington State Coordinating Council for Occupational Education, Olympia.

    This manual for sewage treatment plant operators was prepared by a committee of operators, educators, and engineers for use as a reference text and handbook and to serve as a training manual for short course and certification programs. Sewage treatment plant operators have a responsibility in water quality control; they are the principal actors in…

  2. Digital design using selection operations

    NASA Technical Reports Server (NTRS)

    Whitaker, Sterling R. (Inventor); Miles, Lowell H. (Inventor); Cameron, Eric G. (Inventor)

    2004-01-01

    A digital integrated circuit chip is designed by identifying a logical structure to be implemented. This logical structure is represented in terms of a logical operations, at least 5% of which include selection operations. A determination is made of logic cells that correspond to an implementation of these logical operations.

  3. Operating Reserves and Variable Generation

    SciTech Connect

    Ela, E.; Milligan, M.; Kirby, B.

    2011-08-01

    This report tries to first generalize the requirements of the power system as it relates to the needs of operating reserves. It also includes a survey of operating reserves and how they are managed internationally in system operations today and then how new studies and research are proposing they may be managed in the future with higher penetrations of variable generation.

  4. Space Operations in the Eighties.

    ERIC Educational Resources Information Center

    Aviation/Space, 1982

    1982-01-01

    Highlights activities/accomplishments and future endeavors related to space operations. Topics discussed include the Space Shuttle, recovery/refurbishment operations, payload manipulator, upper stages operations, tracking and data relay, spacelab, space power systems, space exposure facility, space construction, and space station. (JN)

  5. LSST operation simulator implementation

    NASA Astrophysics Data System (ADS)

    Delgado, Francisco; Cook, Kem; Miller, Michelle; Allsman, Robyn; Pierfederici, Francesco

    2006-06-01

    We have developed an operation simulator for the Large Synoptic Survey Telescope (LSST) that is an implementation in Python language using the SimPy extension, with a modular and object-oriented design. The main components include a telescope model, a sky model, a weather database for 3 sites, a scheduler and multiple observing proposals. All the proposals derive from a parent class which is fully configurable through about 75 parameters to implement a specific science survey. These parameters control the target selection region, the composition of the sequence of observations for each field, the timing restrictions and filter selection criteria of each observation, the lunation handling, seeing limits, etc. The current implemented proposals include Weak Lensing, Near Earth Asteroids, Supernova and Kuiper Belt Objects. The telescope model computes the slew time delay from the current position to any given target position, using a complete kinematic model for the mount, dome and rotator, as well as optics alignment corrections. The model is fully configurable through about 50 parameters. The scheduler module combines the information received from the proposals and the telescope model for selecting the best target at each moment, promoting targets that fulfill multiple surveys and storing all the simulator activities in a MySQL database for further analysis of the run. This scheduler is also configurable; for example, balancing the weight of the slew time delay in selecting the next field to observe. This simulator has been very useful in clarifying some of the technical and scientific capabilities of the LSST design, and gives a good baseline for a future observation scheduler.

  6. Atomic Force Microscope Operation

    NASA Technical Reports Server (NTRS)

    2008-01-01

    [figure removed for brevity, see original site] Click on image for animation (large file)

    This animation is a scientific illustration of the operation of NASA's Phoenix Mars Lander's Atomic Force Microscope, or AFM. The AFM is part of Phoenix's Microscopy, Electrochemistry, and Conductivity Analyzer, or MECA.

    The AFM is used to image the smallest Martian particles using a very sharp tip at the end of one of eight beams.

    The beam of the AFM is set into vibration and brought up to the surface of a micromachined silicon substrate. The substrate has etched in it a series of pits, 5 micrometers deep, designed to hold the Martian dust particles.

    The microscope then maps the shape of particles in three dimensions by scanning them with the tip.

    At the end of the animation is a 3D representation of the AFM image of a particle that was part of a sample informally called 'Sorceress.' The sample was delivered to the AFM on the 38th Martian day, or sol, of the mission (July 2, 2008).

    The image shows four round pits, only 5 microns in depth, that were micromachined into the silicon substrate.

    A Martian particle only one micrometer, or one millionth of a meter, across is held in the upper left pit.

    The rounded particle shown at the highest magnification ever seen from another world is a particle of the dust that cloaks Mars. Such dust particles color the Martian sky pink, feed storms that regularly envelop the planet and produce Mars' distinctive red soil.

    The AFM was developed by a Swiss-led consortium, with Imperial College London producing the silicon substrate that holds sampled particles.

    The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

  7. NUCLA Circulating Atmospheric Fluidized Bed Demonstration Project

    SciTech Connect

    Keith, Raymond E.; Heller, Thomas J.; Bush, Stuart A.

    1991-01-01

    This Annual Report on Colorado-Ute Electric Association's NUCLA Circulating Fluidized Bed (CFB) Demonstration Program covers the period from February 1987 through December 1988. The outline for presentation in this report includes a summary of unit operations along with individual sections covering progress in study plan areas that commenced during this reporting period. These include cold-mode shakedown and calibration, plant commercial performance statistics, unit start-up (cold), coal and limestone preparation and handling, ash handling system performance and operating experience, tubular air heater, baghouse operation and performance, materials monitoring, and reliability monitoring. During this reporting period, the coal-mode shakedown and calibration plan was completed. (VC)

  8. NUCLA Circulating Atmospheric Fluidized Bed Demonstration Project. Annual report, 1988

    SciTech Connect

    Not Available

    1991-01-01

    This Annual Report on Colorado-Ute Electric Association`s NUCLA Circulating Fluidized Bed (CFB) Demonstration Program covers the period from February 1987 through December 1988. The outline for presentation in this report includes a summary of unit operations along with individual sections covering progress in study plan areas that commenced during this reporting period. These include cold-mode shakedown and calibration, plant commercial performance statistics, unit start-up (cold), coal and limestone preparation and handling, ash handling system performance and operating experience, tubular air heater, baghouse operation and performance, materials monitoring, and reliability monitoring. During this reporting period, the coal-mode shakedown and calibration plan was completed. (VC)

  9. TCMS operations and maintenance philosophy

    NASA Technical Reports Server (NTRS)

    Buehler, David P.; Griffin, Rock E.

    1992-01-01

    The purpose is to describe the basic philosophies of operating and maintaining the Test, Control, and Monitor System (TCMS) equipment. TCMS is a complex and sophisticated checkout system. Operations and maintenance processes developed to support it will be based upon current experience, but will be focused on the specific needs of TCMS in support of Space Station Freedom Program (SSFP) and related activities. An overview of the operations and maintenance goals and philosophies are presented. The assumptions, roles and responsibilities, concepts and interfaces for operation, on-line maintenance, off-line support, and Operations and Maintenance (O&M) personnel training on all TCMS equipment located at KSC are described.

  10. Telerobotic ground-remote operations

    NASA Technical Reports Server (NTRS)

    Bon, Bruce; Zimmerman, Wayne

    1991-01-01

    The Telerobotic Ground-Remote Operations task consists of development of a demonstration local-site operator control station that includes a graphical user interface (GUI) for control of a remote robot, and development of operator-assisted perception algorithms and software that will provide flexible and accurate world modeling capabilities. The topics covered are presented in view graph form and include: (1) local site development configuration; (2) system design; (3) operator control station (local site) software block diagram; (4) operator-assisted perception; and (5) program status.

  11. Influence of some operational variables on the radial keratotomy operation

    PubMed Central

    Wang, J.; Zeng, Y.; Li, X

    2000-01-01

    AIMS—To assess the contribution of the four major operational variables in the radial keratotomy operation (RK) to the correction of myopic eyes. To study the deformation of the cornea after the operation and provide some valuable references for clinical practice.
METHODS—The expression of the correction ratio has been deduced, which can be directly represent as the deformation ratio of the corneal radius after the operation. This allows for the numerical simulation of the RK operation. On the basis of the known biomechanical property of the cornea, by means of the finite element method, a series of computerised geometric and biomechanical models for the simulation of refractive surgery have been established. Some operational variables in the RK operation were analysed, and their influence on the operational outcome has been computed and systematically analysed.
RESULTS AND CONCLUSION—All of the four variables have a positive effect on the operational outcome. The greater the four variables are the more correction effects of myopia can be obtained. Because the four variables are interinfluential, the operational variables can be optimised to get the best result in order to meet patients' differing requirements.

 PMID:10837396

  12. Modeling aerial refueling operations

    NASA Astrophysics Data System (ADS)

    McCoy, Allen B., III

    Aerial Refueling (AR) is the act of offloading fuel from one aircraft (the tanker) to another aircraft (the receiver) in mid flight. Meetings between tanker and receiver aircraft are referred to as AR events and are scheduled to: escort one or more receivers across a large body of water; refuel one or more receivers; or train receiver pilots, tanker pilots, and boom operators. In order to efficiently execute the Aerial Refueling Mission, the Air Mobility Command (AMC) of the United States Air Force (USAF) depends on computer models to help it make tanker basing decisions, plan tanker sorties, schedule aircraft, develop new organizational doctrines, and influence policy. We have worked on three projects that have helped AMC improve its modeling and decision making capabilities. Optimal Flight Planning. Currently Air Mobility simulation and optimization software packages depend on algorithms which iterate over three dimensional fuel flow tables to compute aircraft fuel consumption under changing flight conditions. When a high degree of fidelity is required, these algorithms use a large amount of memory and CPU time. We have modeled the rate of aircraft fuel consumption with respect to AC GrossWeight, Altitude and Airspeed. When implemented, this formula will decrease the amount of memory and CPU time needed to compute sortie fuel costs and cargo capacity values. We have also shown how this formula can be used in optimal control problems to find minimum costs flight plans. Tanker Basing Demand Mismatch Index. Since 1992, AMC has relied on a Tanker Basing/AR Demand Mismatch Index which aggregates tanker capacity and AR demand data into six regions. This index was criticized because there were large gradients along regional boundaries. Meanwhile tankers frequently cross regional boundaries to satisfy the demand for AR support. In response we developed continuous functions to score locations with respect to their proximity to demand for AR support as well as their

  13. A multiprocessor operating system simulator

    SciTech Connect

    Johnston, G.M.; Campbell, R.H. . Dept. of Computer Science)

    1988-01-01

    This paper describes a multiprocessor operating system simulator that was developed by the authors in the Fall of 1987. The simulator was built in response to the need to provide students with an environment in which to build and test operating system concepts as part of the coursework of a third-year undergraduate operating systems course. Written in C++, the simulator uses the co-routine style task package that is distributed with the AT and T C++ Translator to provide a hierarchy of classes that represents a broad range of operating system software and hardware components. The class hierarchy closely follows that of the Choices family of operating systems for loosely and tightly coupled multiprocessors. During an operating system course, these classes are refined and specialized by students in homework assignments to facilitate experimentation with different aspects of operating system design and policy decisions. The current implementation runs on the IBM RT PC under 4.3bsd UNIX.

  14. LOFT Augmented Operator Capability Program

    SciTech Connect

    Hollenbeck, D.A.; Krantz, E.A.; Hunt, G.L.; Meyer, O.R.

    1980-01-01

    The outline of the LOFT Augmented Operator Capability Program is presented. This program utilizes the LOFT (Loss-of-Fluid Test) reactor facility which is located at the Idaho National Engineering Laboratory and the LOFT operational transient experiment series as a test bed for methods of enhancing the reactor operator's capability for safer operation. The design of an Operational Diagnotics and Display System is presented which was backfit to the existing data acquisition computers. Basic color-graphic displays of the process schematic and trend type are presented. In addition, displays were developed and are presented which represent safety state vector information. A task analysis method was applied to LOFT reactor operating procedures to test its usefulness in defining the operator's information needs and workload.

  15. A Multiprocessor Operating System Simulator

    NASA Technical Reports Server (NTRS)

    Johnston, Gary M.; Campbell, Roy H.

    1988-01-01

    This paper describes a multiprocessor operating system simulator that was developed by the authors in the Fall semester of 1987. The simulator was built in response to the need to provide students with an environment in which to build and test operating system concepts as part of the coursework of a third-year undergraduate operating systems course. Written in C++, the simulator uses the co-routine style task package that is distributed with the AT&T C++ Translator to provide a hierarchy of classes that represents a broad range of operating system software and hardware components. The class hierarchy closely follows that of the 'Choices' family of operating systems for loosely- and tightly-coupled multiprocessors. During an operating system course, these classes are refined and specialized by students in homework assignments to facilitate experimentation with different aspects of operating system design and policy decisions. The current implementation runs on the IBM RT PC under 4.3bsd UNIX.

  16. Medical supply on contingency military operations: experience from Operation GRITROCK.

    PubMed

    Robinson, J P; Reeves, P

    2015-01-01

    Medical supply during military operations has the ability to affect the efficacy of the operation being undertaken, either negatively or positively. An appropriately-managed maritime platform with a robust medical supply chain during transit and on arrival in theatre is the main aim. A secure supply chain will reduce any implications that logistics may have with regard to capability, and negate the effects of deficiencies of short shelf life items occurring over time and during use in high tempo operations. PMID:26867409

  17. Medical supply on contingency military operations: experience from Operation GRITROCK.

    PubMed

    Robinson, J P; Reeves, P

    2015-01-01

    Medical supply during military operations has the ability to affect the efficacy of the operation being undertaken, either negatively or positively. An appropriately-managed maritime platform with a robust medical supply chain during transit and on arrival in theatre is the main aim. A secure supply chain will reduce any implications that logistics may have with regard to capability, and negate the effects of deficiencies of short shelf life items occurring over time and during use in high tempo operations.

  18. From EGEE Operations Portal towards EGI Operations Portal

    NASA Astrophysics Data System (ADS)

    Cordier, Hélène; L'Orphelin, Cyril; Reynaud, Sylvain; Lequeux, Olivier; Loikkanen, Sinikka; Veyre, Pierre

    Grid operators in EGEE have been using a dedicated dashboard as their central operational tool, stable and scalable for the last 5 years despite continuous upgrade from specifications by users, monitoring tools or data providers. In EGEE-III, recent regionalisation of operations led the Operations Portal developers to conceive a standalone instance of this tool. We will see how the dashboard reorganization paved the way for the re-engineering of the portal itself. The outcome is an easily deployable package customized with relevant information sources and specific decentralized operational requirements. This package is composed of a generic and scalable data access mechanism, Lavoisier; a renowned php framework for configuration flexibility, Symfony and a MySQL database. VO life cycle and operational information, EGEE broadcast and Downtime notifications are next for the major reorganization until all other key features of the Operations Portal are migrated to the framework. Features specifications will be sketched at the same time to adapt to EGI requirements and to upgrade. Future work on feature regionalisation, on new advanced features or strategy planning will be tracked in EGI- Inspire through the Operations Tools Advisory Group, OTAG, where all users, customers and third parties of the Operations Portal are represented from January 2010.

  19. Operation Safety Activities for JEM System and Payload Operation

    NASA Astrophysics Data System (ADS)

    Takada, Satomi; Iwata, Yoshihiro; Kato, Mitsuyasu

    2010-09-01

    The Japanese Experiment Module(JEM), "KIBO", which is a part of the International Space Station(ISS) is the first Japanese manned space experimental facility. JEM system and payloads have made the birth of an era of operation. The JAXA Human Space S&MA(JAXA S&MA) assures safety of JEM module and JAXA payloads not only during assembly phase but also operation phase. During the safety critical operation for JEM system and payloads, JAXA S&MA is on ESR S&MA console to monitor the operation related to safety. Safety check list is made for each safety critical task to identify the useful information such as hazard control, operational constraints and flight rules, and so on. It is a support tool for JAXA S&MA to monitor the operation overall. JAXA S&MA has the responsibility of assessing the safety related updates or changes of operational documents. JAXA S&MA will continue to support the JEM operation as long as the operation is continued.

  20. Operator Performance Support System (OPSS)

    NASA Technical Reports Server (NTRS)

    Conklin, Marlen Z.

    1993-01-01

    In the complex and fast reaction world of military operations, present technologies, combined with tactical situations, have flooded the operator with assorted information that he is expected to process instantly. As technologies progress, this flow of data and information have both guided and overwhelmed the operator. However, the technologies that have confounded many operators today can be used to assist him -- thus the Operator Performance Support Team. In this paper we propose an operator support station that incorporates the elements of Video and Image Databases, productivity Software, Interactive Computer Based Training, Hypertext/Hypermedia Databases, Expert Programs, and Human Factors Engineering. The Operator Performance Support System will provide the operator with an integrating on-line information/knowledge system that will guide expert or novice to correct systems operations. Although the OPSS is being developed for the Navy, the performance of the workforce in today's competitive industry is of major concern. The concepts presented in this paper which address ASW systems software design issues are also directly applicable to industry. the OPSS will propose practical applications in how to more closely align the relationships between technical knowledge and equipment operator performance.

  1. Operational models of infrastructure resilience.

    PubMed

    Alderson, David L; Brown, Gerald G; Carlyle, W Matthew

    2015-04-01

    We propose a definition of infrastructure resilience that is tied to the operation (or function) of an infrastructure as a system of interacting components and that can be objectively evaluated using quantitative models. Specifically, for any particular system, we use quantitative models of system operation to represent the decisions of an infrastructure operator who guides the behavior of the system as a whole, even in the presence of disruptions. Modeling infrastructure operation in this way makes it possible to systematically evaluate the consequences associated with the loss of infrastructure components, and leads to a precise notion of "operational resilience" that facilitates model verification, validation, and reproducible results. Using a simple example of a notional infrastructure, we demonstrate how to use these models for (1) assessing the operational resilience of an infrastructure system, (2) identifying critical vulnerabilities that threaten its continued function, and (3) advising policymakers on investments to improve resilience.

  2. Operational models of infrastructure resilience.

    PubMed

    Alderson, David L; Brown, Gerald G; Carlyle, W Matthew

    2015-04-01

    We propose a definition of infrastructure resilience that is tied to the operation (or function) of an infrastructure as a system of interacting components and that can be objectively evaluated using quantitative models. Specifically, for any particular system, we use quantitative models of system operation to represent the decisions of an infrastructure operator who guides the behavior of the system as a whole, even in the presence of disruptions. Modeling infrastructure operation in this way makes it possible to systematically evaluate the consequences associated with the loss of infrastructure components, and leads to a precise notion of "operational resilience" that facilitates model verification, validation, and reproducible results. Using a simple example of a notional infrastructure, we demonstrate how to use these models for (1) assessing the operational resilience of an infrastructure system, (2) identifying critical vulnerabilities that threaten its continued function, and (3) advising policymakers on investments to improve resilience. PMID:25808298

  3. TDRSS operations control analysis study

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The use of an operational Tracking and Data Relay Satellite System (TDRSS) and the remaining ground stations for the STDN (GSTDN) was investigated. The operational aspects of TDRSS concepts, GSTDN as a 14-site network, and GSTDN as a 7 site-network were compared and operations control concepts for the configurations developed. Man/machine interface, scheduling system, and hardware/software tradeoff analyses were among the factors considered in the analysis.

  4. DOE limited standard: Operations assessments

    SciTech Connect

    1996-05-01

    Purpose of this standard is to provide DOE Field Element assessors with a guide for conducting operations assessments, and provide DOE Field Element managers with the criteria of the EM Operations Assessment Program. Sections 6.1 to 6.21 provide examples of how to assess specific areas; the general techniques of operations assessments (Section 5) may be applied to other areas of health and safety (e.g. fire protection, criticality safety, quality assurance, occupational safety, etc.).

  5. Operating experiences of retardant bombers during firefighting operations

    NASA Technical Reports Server (NTRS)

    Jewel, J. W., Jr.; Morris, G. J.; Avery, D. E.

    1974-01-01

    Data are presented on operational practices and maneuver accelerations experienced by two Douglas DC-6B airplanes converted to retardant bombers and used in firefighting operations. The data cover two fire seasons in the mountainous regions of the northwestern United States.

  6. EOS Operations Systems: EDOS Implemented Changes to Reduce Operations Costs

    NASA Technical Reports Server (NTRS)

    Cordier, Guy R.; Gomez-Rosa, Carlos; McLemore, Bruce D.

    2007-01-01

    The authors describe in this paper the progress achieved to-date with the reengineering of the Earth Observing System (EOS) Data and Operations System (EDOS), the experience gained in the process and the ensuing reduction of ground systems operations costs. The reengineering effort included a major methodology change, applying to an existing schedule driven system, a data-driven system approach.

  7. Measuring Information Technology Performance: Operational Efficiency and Operational Effectiveness

    ERIC Educational Resources Information Center

    Moore, Annette G.

    2012-01-01

    This dissertation provides a practical approach for measuring operational efficiency and operational effectiveness for IT organizations introducing the ITIL process framework. The intent of the study was to assist Chief Information Officers (CIOs) in explaining the impact of introducing the Information Technology Infrastructure Library (ITIL)…

  8. The Leisure Operation. Leisure Management Module. Operational Management Programme.

    ERIC Educational Resources Information Center

    Carver, Gerry

    This module on the leisure operation is intended to enable the reader to develop an understanding of the special requirements and priorities in the development and management of a leisure operation. The material is presented in a self-instructional format in four sections. At the beginning of each section is a statement of the objectives that will…

  9. Exponential Formulae and Effective Operations

    NASA Technical Reports Server (NTRS)

    Mielnik, Bogdan; Fernandez, David J. C.

    1996-01-01

    One of standard methods to predict the phenomena of squeezing consists in splitting the unitary evolution operator into the product of simpler operations. The technique, while mathematically general, is not so simple in applications and leaves some pragmatic problems open. We report an extended class of exponential formulae, which yield a quicker insight into the laboratory details for a class of squeezing operations, and moreover, can be alternatively used to programme different type of operations, as: (1) the free evolution inversion; and (2) the soft simulations of the sharp kicks (so that all abstract results involving the kicks of the oscillator potential, become realistic laboratory prescriptions).

  10. SPECTR System Operational Test Report

    SciTech Connect

    W.H. Landman Jr.

    2011-08-01

    This report overviews installation of the Small Pressure Cycling Test Rig (SPECTR) and documents the system operational testing performed to demonstrate that it meets the requirements for operations. The system operational testing involved operation of the furnace system to the design conditions and demonstration of the test article gas supply system using a simulated test article. The furnace and test article systems were demonstrated to meet the design requirements for the Next Generation Nuclear Plant. Therefore, the system is deemed acceptable and is ready for actual test article testing.

  11. General aviation IFR operational problems

    NASA Technical Reports Server (NTRS)

    Bolz, E. H.; Eisele, J. E.

    1979-01-01

    Operational problems of general aviation IFR operators (particularly single pilot operators) were studied. Several statistical bases were assembled and utilized to identify the more serious problems and to demonstrate their magnitude. These bases include official activity projections, historical accident data and delay data, among others. The GA operating environment and cockpit environment were analyzed in detail. Solutions proposed for each of the problem areas identified are based on direct consideration of currently planned enhancements to the ATC system, and on a realistic assessment of the present and future limitations of general aviation avionics. A coordinated set of research program is suggested which would provide the developments necessary to implement the proposed solutions.

  12. Operating System Abstraction Layer (OSAL)

    NASA Technical Reports Server (NTRS)

    Yanchik, Nicholas J.

    2007-01-01

    This viewgraph presentation reviews the concept of the Operating System Abstraction Layer (OSAL) and its benefits. The OSAL is A small layer of software that allows programs to run on many different operating systems and hardware platforms It runs independent of the underlying OS & hardware and it is self-contained. The benefits of OSAL are that it removes dependencies from any one operating system, promotes portable, reusable flight software. It allows for Core Flight software (FSW) to be built for multiple processors and operating systems. The presentation discusses the functionality, the various OSAL releases, and describes the specifications.

  13. ALGORITHM DEVELOPMENT FOR SPATIAL OPERATORS.

    USGS Publications Warehouse

    Claire, Robert W.

    1984-01-01

    An approach is given that develops spatial operators about the basic geometric elements common to spatial data structures. In this fashion, a single set of spatial operators may be accessed by any system that reduces its operands to such basic generic representations. Algorithms based on this premise have been formulated to perform operations such as separation, overlap, and intersection. Moreover, this generic approach is well suited for algorithms that exploit concurrent properties of spatial operators. The results may provide a framework for a geometry engine to support fundamental manipulations within a geographic information system.

  14. Operations automation using the Link Monitor and Control Operator Assistant

    NASA Technical Reports Server (NTRS)

    Lee, Lorrine F.; Cooper, Lynne P.

    1993-01-01

    The Link Monitor and Control Operator Assistant (LMC OA) is a knowledge-based prototype system which uses AI techniques to provide semiautomated monitor and control functions to support operations of the Deep Space Network (DSN) 70-m antenna at the Goldstone Deep Space Communications Complex (DSCC). The manual and time-consuming process of configuring the 70-m antenna and its associated communications and processing equipment, known as precalibration, is an overhead activity; the time spent in precalibration is time which cannot be spent supporting actual mission operations. Therefore, the major goal of the LMC OA task is to demonstrate techniques that reduce precalibration time, decrease operations overhead, and increase the availability of this valuable and oversubscribed NASA resource. The LMC OA prototype was tested in a parallel, experimental mode at the Goldstone DSCC performing semiautomated precalibration using the actual operational equipment. This test demonstrated that a reduction of 40 percent in precalibration time can be achieved with the LMC OA prototype.

  15. CRADA Final Report For CRADA NO. CR-12-006 [Operation and Testing of an SO{sub 2}-depolarized Electrolyzer (SDE) for the Purpose of Hydrogen and Sulfuric Acid Production

    SciTech Connect

    Summers, W. A.; Colon-Mercado, H. R.; Steimke, J. L.; Zahn, Steffen

    2014-02-24

    new membrane electrode assembly (MEA) was fabricated and installed in the single cell electrolyzer (60 cm{sup 2} active cell area). Shakedown testing was conducted, and several modifications were made to the test facility equipment. Seven different MEAs were used during testing. Beginning on May 20, 2013, SRNL was able to test the SDE continuously for 1200 hours, including 1000 hours under power to generate hydrogen at an average rate of 10.8 liters per hour. The SDE was not removed or repaired during the 50-day test and was successfully restarted after each shutdown. The test was intentionally stopped after 1200 hours (1000 hours of hydrogen production) due to funding constraints. Post-test examination of the MEA using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Microanalysis (EDAX) showed no elemental sulfur deposits or sulfur layer inside the cell, thus successfully achieving the test goals. The results demonstrated that the SDE could be operated for extended periods without major performance degradation or the buildup of sulfur inside the MEA. Air Products conducted an assessment of the economic viability of the SDE based on the “as tested” design. The results indicated that the SDE faces significant economic obstacles in its current state. Further development and scale-up are necessary before the SDE is ready for commercialization.

  16. 76 FR 42768 - Electronic Operations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-19

    ... Office of Thrift Supervision Electronic Operations AGENCY: Office of Thrift Supervision (OTS), Treasury... collection. Title of Proposal: Electronic Operations. OMB Number: 1550-0095. Form Number: N/A. Description: Federal savings associations may use, or participate with others to use, electronic means or facilities...

  17. Operant Variability: A Conceptual Analysis

    PubMed Central

    de Souza Barba, Lourenço.

    2012-01-01

    Some researchers claim that variability is an operant dimension of behavior. The present paper reviews the concept of operant behavior and emphasizes that differentiation is the behavioral process that demonstrates an operant relation. Differentiation is conceived as change in the overlap between two probability distributions: the distribution of reinforcement probability as a function of some response property (S distribution) and the probability distribution of the response property itself (R distribution). This concept implies that the differentiation process can be measured only if S distribution and R distribution are both established on the same response property. To determine whether the differentially reinforced behavioral variability fits the proposed concept of operant behavior, I examine the main procedures (lag n and threshold procedures) and the main dependent variable (U value) employed in the studies of operant variability. Because lag n and threshold procedures establish their S distributions on properties distinct from U value, differentiation cannot be measured over the change in U value. I conclude that studies of operant variability have failed to provide a direct demonstration that variability is an operant dimension of behavior. Hence, studies in which measures of variability provide a basis to measure differentiation can better support the claim that variability is an operant dimension of behavior. PMID:23450082

  18. Multitasking operating systems for microprocessors

    SciTech Connect

    Cramer, T.

    1981-01-01

    Microprocessors, because of their low cost, low power consumption, and small size, have caused an explosion in the number of innovative computer applications. Although there is a great deal of variation in microprocessor applications software, there is relatively little variation in the operating-system-level software from one application to the next. Nonetheless, operating system software, especially when multitasking is involved, can be very time consuming and expensive to develop. The major microprocessor manufacturers have acknowledged the need for operating systems in microprocessor applications and are now supplying real-time multitasking operating system software that is adaptable to a wide variety of user systems. Use of this existing operating system software will decrease the number of redundant operating system development efforts, thus freeing programmers to work on more creative and productive problems. This paper discusses the basic terminology and concepts involved with multitasking operating systems. It is intended to provide a general understanding of the subject, so that the reader will be prepared to evaluate specific operating system software according to his or her needs. 2 references.

  19. Sludge stabilization operability test report

    SciTech Connect

    Lewis, W.S.

    1994-11-08

    Document provides the results of the Operability Test Procedure performed to test the operability of the HC-21C thermal stabilization process for sludge. The OTP assured all equipment functioned properly and established the baseline temperature profile for glovebox HC-21C.

  20. Magnetic wormholes and vertex operators

    SciTech Connect

    Singh, H. )

    1994-10-15

    We consider wormhole solutions in 2+1 Euclidean dimensions. A duality transformation is introduced to derive a new action from the magnetic wormhole action of Gupta, Hughes, Preskill, and Wise. The classical solution is presented. The vertex operators corresponding to the wormhole are derived. Conformally coupled scalars and spinors are considered in the wormhole background and the vertex operators are computed.

  1. Quantum Strategies and Local Operations

    NASA Astrophysics Data System (ADS)

    Gutoski, Gus

    2010-02-01

    This thesis is divided into two parts. In Part I we introduce a new formalism for quantum strategies, which specify the actions of one party in any multi-party interaction involving the exchange of multiple quantum messages among the parties. This formalism associates with each strategy a single positive semidefinite operator acting only upon the tensor product of the input and output message spaces for the strategy. We establish three fundamental properties of this new representation for quantum strategies and we list several applications, including a quantum version of von Neumann's celebrated 1928 Min-Max Theorem for zero-sum games and an efficient algorithm for computing the value of such a game. In Part II we establish several properties of a class of quantum operations that can be implemented locally with shared quantum entanglement or classical randomness. In particular, we establish the existence of a ball of local operations with shared randomness lying within the space spanned by the no-signaling operations and centred at the completely noisy channel. The existence of this ball is employed to prove that the weak membership problem for local operations with shared entanglement is strongly NP-hard. We also provide characterizations of local operations in terms of linear functionals that are positive and "completely" positive on a certain cone of Hermitian operators, under a natural notion of complete positivity appropriate to that cone. We end the thesis with a discussion of the properties of no-signaling quantum operations.

  2. Calculus of twisted vertex operators

    PubMed Central

    Lepowsky, J.

    1985-01-01

    Starting from an arbitrary isometry of an arbitrary even lattice, twisted and shifted vertex operators are introduced. Under commutators, these operators provide realizations of twisted affine Lie algebras. This construction, generalizing a number of known ones, is based on a self-contained “calculus.” PMID:16593635

  3. The Dynamics of Operant Conditioning.

    ERIC Educational Resources Information Center

    Dragoi, Valentin; Staddon, J. E . R.

    1999-01-01

    Proposes a minimal set of principles based on short-term and long-term memory mechanisms that can explain the major static and dynamic properties of operant behavior in both single-choice and multiresponse situations. The model predicts the major qualitative features of operant phenomena and suggests an experimental test of theoretical predictions…

  4. MIT January Operational Internship Experience

    NASA Technical Reports Server (NTRS)

    Bosanac, Natasha; DeVivero, Charlie; James, Jillian; Perez-Martinez, Carla; Pino, Wendy; Wang, Andrew; Willett, Ezekiel; Williams, Kwami

    2010-01-01

    This viewgraph presentation describes the MIT January Operational Internship Experience (JOIE) program. The topics include: 1) Landing and Recovery; 2) Transportation; 3) Shuttle Processing; 4) Constellation Processing; 5) External Tank; 6) Launch Pad; 7) Ground Operations; 8) Hypergolic Propellants; 9) Environmental; 10) Logistics; 11) Six Sigma; 12) Systems Engineering; and 13) Human Factors.

  5. Operations Management and Curriculum Design.

    ERIC Educational Resources Information Center

    Slack, Nigel

    1983-01-01

    The last few years have seen developments in the academic treatment of operations management which both broaden the subject to include a much wider range of industries in the nonmanufacturing sectors and place the operations function in a more strategic context. (MEAD Subscriptions, CSML, University of Lancaster, Lancaster LA1 4YX, England) (SSH)

  6. Payload Operations Support Team Tools

    NASA Technical Reports Server (NTRS)

    Askew, Bill; Barry, Matthew; Burrows, Gary; Casey, Mike; Charles, Joe; Downing, Nicholas; Jain, Monika; Leopold, Rebecca; Luty, Roger; McDill, David; Mermelstein, Scott; Morsics, Jon; Osborne, Richard; Owens, Cindy; Price, Thomas; Quaddumi, Ayman; Thompson, Jim; Walter, Patrick; Vail, Melanie; Campbell, Richard; Kelly, Mark

    2007-01-01

    Payload Operations Support Team Tools is a software system that assists in (1) development and testing of software for payloads to be flown aboard the space shuttles and (2) training of payload customers, flight controllers, and flight crews in payload operations

  7. TMX upgrade experimental operating plan

    SciTech Connect

    Coensgen, F.H.; Davis, J.C.; Simonen, T.C.

    1981-07-01

    This document describes the operating plan for the TMX Upgrade experiment. This plan covers the period from November 1981 to March 1983 and describes how the TMX will be brought into operation, our schedules and milestones, and how we will determine if the TMX Upgrade program milestones have been met.

  8. Training Guidelines: Glass Furnace Operators.

    ERIC Educational Resources Information Center

    Ceramics, Glass, and Mineral Products Industry Training Board, Harrow (England).

    Technological development in the glass industry is constantly directed towards producing high quality glass at low operating costs. Particularly, changes have taken place in melting methods which mean that the modern furnace operator has greater responsibilities than any of his predecessors. The complexity of control systems, melting rates, tank…

  9. Fossil power plant operating procedures

    SciTech Connect

    Not Available

    1984-01-01

    This three-volume text presents the theory and interaction of all components within a system. Startup, normal, emergency, and shutdown operating techniques are discussed for each component and subsystem within the sixteen systems addressed. In addition to the plant systems, pump operation, fluid piping, instrumentation and control, and piping and instrument drawings (P and IDs) are covered.

  10. SMALL CRAFT OPERATION AND NAVIGATION.

    ERIC Educational Resources Information Center

    Louisiana State Dept. of Education, Baton Rouge.

    THIS REFERENCE TEXTBOOK WAS PREPARED FOR USE IN THE FIRST PART OF A TWO-PART COURSE IN MARINE NAVIGATION AND SMALL CRAFT OPERATION ON INLAND AND INTERNATIONAL WATERS. THE MATERIAL WAS DEVELOPED BY AN INDIVIDUAL AUTHOR FOR USE IN TRADE SCHOOL PREPARATORY AND EXTENSION CLASSES FOR MALE ADULTS WHO PLAN TO OPERATE BOATS. IT IS MAINLY CONCERNED WITH…

  11. Curriculum Guidelines for Operative Dentistry.

    ERIC Educational Resources Information Center

    Journal of Dental Education, 1984

    1984-01-01

    The American Association of Dental Schools' guidelines for operative dentistry curricula include an overview of the scope and objectives of operative dentistry, notes on the interrelationship of the discipline and the total curriculum, and an outline of primary educational goals, core content, specific behavioral objectives, sequencing, faculty,…

  12. Operations Strategy with Paper Boats

    ERIC Educational Resources Information Center

    Sumukadas, Narendar

    2010-01-01

    When participants in introductory business courses encounter the term "operations strategy," it is not easy for them to appreciate what operations strategy is about, or how it fits with overall business strategy. This game breaks down highfalutin jargon into experiences that participants can readily relate to. While working in teams to make paper…

  13. Performance Benchmarking Student Transportation Operations.

    ERIC Educational Resources Information Center

    Forsyth, Andy

    2001-01-01

    Student transportation complexities make evaluating a program's cost and quality very difficult. The first step in measuring performance is defining an operation's functional components: level of service delivery, units of service, and cost of services. Other considerations include routing, logistics, and fleet maintenance and support operations.…

  14. Operator Formulation of Classical Mechanics.

    ERIC Educational Resources Information Center

    Cohn, Jack

    1980-01-01

    Discusses the construction of an operator formulation of classical mechanics which is directly concerned with wave packets in configuration space and is more similar to that of convential quantum theory than other extant operator formulations of classical mechanics. (Author/HM)

  15. Operator`s guide to eliminating bias in CEM systems

    SciTech Connect

    Jahnke, J.A.

    1994-11-01

    The inclusion of the t-test for bias in the Acid Rain Regulations, 40 CFR Part 75, signaled a marked improvement in the capability to detect a significant source of measurement error that had previously remained hidden. The capability to detect bias left environmental technicians and instrument operators with the often daunting job of, first, diagnosing the cause of the measurement bias, and, then, taking steps to correct it. This publication is intended to make that job easier. A pull-out chart, entitled Eliminating Bias in CEMS -- A Checklist, provides a comprehensive listing of the monitoring system problems that can cause systematic error. A brief description and potential corrective actions are shown for each problem. Finally, the Checklist directs users to the appropriate pages in the accompanying Operator`s Guide, where fuller descriptions of problems and remedies can be found. The accompanying Operator`s Guide to Eliminating Bias in Monitoring Systems is organized into eight chapters. The problem areas covered are: Probe Location and Stratification (Chapter 2), Extractive Sampling Systems (Chapter 3), In-Situ Gas Monitoring Systems and Opacity Monitors (Chapter 4), Flow Monitors (Chapter 5), Gas Analyzers (Chapter 6), and Data Acquisition and Handling Systems (Chapter 7). Chapter 8, the last chapter in the Operator`s Guide, discusses elements that should be incorporated into ongoing Quality Assurance Programs to detect and prevent the problems that produce systematic error in monitor measurements.

  16. International Ultraviolet Explorer Observatory operations

    NASA Technical Reports Server (NTRS)

    1985-01-01

    This volume contains the final report for the International Ultraviolet Explorer IUE Observatory Operations contract. The fundamental operational objective of the International Ultraviolet Explorer (IUE) program is to translate competitively selected observing programs into IUE observations, to reduce these observations into meaningful scientific data, and then to present these data to the Guest Observer in a form amenable to the pursuit of scientific research. The IUE Observatory is the key to this objective since it is the central control and support facility for all science operations functions within the IUE Project. In carrying out the operation of this facility, a number of complex functions were provided beginning with telescope scheduling and operation, proceeding to data processing, and ending with data distribution and scientific data analysis. In support of these critical-path functions, a number of other significant activities were also provided, including scientific instrument calibration, systems analysis, and software support. Routine activities have been summarized briefly whenever possible.

  17. Health Behaviors of Operating Engineers

    PubMed Central

    Duffy, Sonia A.; Missel, Amanda L.; Waltje, Andrea H.; Ronis, David L.; Fowler, Karen E.; Hong, OiSaeng

    2013-01-01

    RESEARCH ABSTRACT Operating Engineers (heavy equipment operators in construction) may be at particular risk for heart disease and cancer related to their exposure to environmental dust and smoking, the sedentary nature of their job, and long hours of exposure to the sun. The aim of this study was to characterize the health behaviors of Operating Engineers. This cross-sectional survey from a convenience sample of Operating Engineers (N = 498) used validated instruments to measure smoking, drinking, diet, exercise, sleep, and sun exposure. Univariate and bivariate analyses to detect differences by age were conducted. The sample scored significantly worse on all five health behaviors compared to population norms. Those who were older were less likely to smoke and chew tobacco and more likely to eat fruits and vegetables. Many were interested in services to improve their health behaviors. Health behavior interventions are needed and wanted by Operating Engineers. PMID:21688764

  18. Analyses to improve operational flexibility

    SciTech Connect

    Trikouros, N.G.

    1986-01-01

    Operational flexibility is greatly enhanced if the technical bases for plant limits and design margins are fully understood, and the analyses necessary to evaluate the effect of plant modifications or changes in operating modes on these parameters can be performed as required. If a condition should arise that might jeopardize a plant limit or reduce operational flexibility, it would be necessary to understand the basis for the limit or the specific condition limiting operational flexibility and be capable of performing a reanalysis to either demonstrate that the limit will not be violated or to change the limit. This paper provides examples of GPU Nuclear efforts in this regard. Examples of Oyster Creek and Three Mile Island operating experiences are discussed.

  19. Airport surface operations requirements analysis

    NASA Technical Reports Server (NTRS)

    Groce, John L.; Vonbokern, Greg J.; Wray, Rick L.

    1993-01-01

    This report documents the results of the Airport Surface Operations Requirements Analysis (ASORA) study. This study was conducted in response to task 24 of NASA Contract NAS1-18027. This study is part of NASA LaRC's Low Visibility Surface Operations program, which is designed to eliminate the constraints on all-weather arrival/departure operations due to the airport/aircraft ground system. The goal of this program is to provide the capability for safe and efficient aircraft operations on the airport surface during low visibility conditions down to zero. The ASORA study objectives were to (1) develop requirements for operation on the airport surface in visibilities down to zero; (2) survey and evaluate likely technologies; (3) develop candidate concepts to meet the requirements; and (4) select the most suitable concept based on cost/benefit factors.

  20. GOES-next navigation operations

    NASA Technical Reports Server (NTRS)

    Fiorello, John L., Jr.; Oh, In-Hwan; Ranne, C. Lee

    1988-01-01

    The next generation of Geostationary Operational Environmental Satellites, GOES-I through -M (hereafter referred to as GOES-Next), begins a new era in the operation of weather satellites by the National Oceanic and Atmospheric Administration (NOAA). With a new spacecraft design, three-axis attitude stabilization, new ground support equipment, and improved methods of image navigation and registration that use on board compensation techniques to correct images for satellite motion, NOAA expects improved performance over the current series of dual-spin spacecraft. To meet these expectations, planning is currently underway for providing the complex and intensive operational environment that will meet the challenge of operating the GOES-Next spacecraft. This paper describes that operational environment.

  1. The embedded operating system project

    NASA Technical Reports Server (NTRS)

    Campbell, R. H.

    1984-01-01

    This progress report describes research towards the design and construction of embedded operating systems for real-time advanced aerospace applications. The applications concerned require reliable operating system support that must accommodate networks of computers. The report addresses the problems of constructing such operating systems, the communications media, reconfiguration, consistency and recovery in a distributed system, and the issues of realtime processing. A discussion is included on suitable theoretical foundations for the use of atomic actions to support fault tolerance and data consistency in real-time object-based systems. In particular, this report addresses: atomic actions, fault tolerance, operating system structure, program development, reliability and availability, and networking issues. This document reports the status of various experiments designed and conducted to investigate embedded operating system design issues.

  2. Modal Analysis for Grid Operation

    SciTech Connect

    2011-03-03

    MANGO software is to provide a solution for improving small signal stability of power systems through adjusting operator-controllable variables using PMU measurement. System oscillation problems are one of the major threats to the grid stability and reliability in California and the Western Interconnection. These problems result in power fluctuations, lower grid operation efficiency, and may even lead to large-scale grid breakup and outages. This MANGO software aims to solve this problem by automatically generating recommended operation procedures termed Modal Analysis for Grid Operation (MANGO) to improve damping of inter-area oscillation modes. The MANGO procedure includes three steps: recognizing small signal stability problems, implementing operating point adjustment using modal sensitivity, and evaluating the effectiveness of the adjustment. The MANGO software package is designed to help implement the MANGO procedure.

  3. First Cycle Heterogeneous Deformation Behavior and Cyclic Shakedown Phenomena of Nitinol Near A(sub f) Temperatures

    NASA Technical Reports Server (NTRS)

    Jones, H. N.

    1996-01-01

    Experimental observations on the cyclic behavior of a NiTi alloy (Nitinol) at temperatures in the neighborhood of the A(sub f) (austenite finish) temperature are presented. The strongly heterogeneous nature of the deformation behavior of this material at temperatures within this regime during the first cycle is examined with emphasis placed on the difficulties that the existence of such phenomena pose on the formulation of realistic constitutive relations. It is further demonstrated that this heterogeneity of deformation persists on subsequent cycles with the result that the hysteretic cyclic behavior of these alloys can exhibit a point to point variation in an otherwise uniform geometry. The experimental observations on the deformation behavior of this alloy show that it is strongly dependent on temperature and prior deformation history of the sample, thus resulting in an almost intractable problem with respect to capturing an adequate constitutive description from either experiment or modeling.

  4. DETERMINING COARSE PARTICULATE MATTER CONCENTRATIONS: A PERFORMANCE EVALUATION OF CANDIDATE METHODOLOGIES - STUDY DESIGN AND RESULTS FROM THE RTP EQUIPMENT SHAKEDOWN

    EPA Science Inventory

    The main objective of this study is to evaluate the performance of candidate sampling methods for potential use as a Federal Reference Method (FRM) capable of providing an estimate of coarse particle (PMc: particulate matter with an aerodynamic diameter between 2.5 um and 10 um...

  5. 16. OPERATOR STAND. OPERATOR STOOD BETWEEN RAILINGS AND CONTROLLED DREDGING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. OPERATOR STAND. OPERATOR STOOD BETWEEN RAILINGS AND CONTROLLED DREDGING OPERATIONS USING TWO LEVERS FROM CEILING, THREE LEVELS ON THE FLOOR, AND TWO FLOOR PEDDLES. RIGHT HAND CONTROLLED SHOT GUN SWINGER (BOOM MOVE TO RIGHT WHEN PUSHED FORWARD, LEFT WHEN PULLED BACK, AND, IF LUCKY, STOPPED WHEN IN CENTER POSITION). LEFT HAND CONTROLLED THROTTLE. FLOOR LEVER AND FLOOR PEDDLE ON LEFT CONTROLLED THE BACKING LINE FRICTION. MIDDLE LEVER AND PEDDLE, STUCK IN FLOOR CONTROLLED THE MAIN HOIST FRICTION. LEVER ON RIGHT CONTROLLED THE CYLINDER DRAIN VALVE. - Dredge CINCINNATI, Docked on Ohio River at foot of Lighthill Street, Pittsburgh, Allegheny County, PA

  6. Transportation System Concept of Operations

    SciTech Connect

    N. Slater-Thompson

    2006-08-16

    The Nuclear Waste Policy Act of 1982 (NWPA), as amended, authorized the DOE to develop and manage a Federal system for the disposal of SNF and HLW. OCRWM was created to manage acceptance and disposal of SNF and HLW in a manner that protects public health, safety, and the environment; enhances national and energy security; and merits public confidence. This responsibility includes managing the transportation of SNF and HLW from origin sites to the Repository for disposal. The Transportation System Concept of Operations is the core high-level OCRWM document written to describe the Transportation System integrated design and present the vision, mission, and goals for Transportation System operations. By defining the functions, processes, and critical interfaces of this system early in the system development phase, programmatic risks are minimized, system costs are contained, and system operations are better managed, safer, and more secure. This document also facilitates discussions and understanding among parties responsible for the design, development, and operation of the Transportation System. Such understanding is important for the timely development of system requirements and identification of system interfaces. Information provided in the Transportation System Concept of Operations includes: the functions and key components of the Transportation System; system component interactions; flows of information within the system; the general operating sequences; and the internal and external factors affecting transportation operations. The Transportation System Concept of Operations reflects OCRWM's overall waste management system policies and mission objectives, and as such provides a description of the preferred state of system operation. The description of general Transportation System operating functions in the Transportation System Concept of Operations is the first step in the OCRWM systems engineering process, establishing the starting point for the lower level

  7. Payload Operations Control Center (POCC). [spacelab flight operations

    NASA Technical Reports Server (NTRS)

    Shipman, D. L.; Noneman, S. R.; Terry, E. S.

    1981-01-01

    The Spacelab payload operations control center (POCC) timeline analysis program which is used to provide POCC activity and resource information as a function of mission time is described. This program is fully automated and interactive, and is equipped with tutorial displays. The tutorial displays are sufficiently detailed for use by a program analyst having no computer experience. The POCC timeline analysis program is designed to operate on the VAX/VMS version V2.1 computer system.

  8. Kepler Science Operations Center Architecture

    NASA Technical Reports Server (NTRS)

    Middour, Christopher; Klaus, Todd; Jenkins, Jon; Pletcher, David; Cote, Miles; Chandrasekaran, Hema; Wohler, Bill; Girouard, Forrest; Gunter, Jay P.; Uddin, Kamal; Allen, Christopher; Hall, Jennifer; Ibrahim, Khadeejah; Clarke, Bruce; Li, Jie; McCauliff, Sean; Quintana, Elisa; Sommers, Jeneen; Stroozas, Brett; Tenenbaum, Peter; Twicken, Joseph; Wu, Hayley; Caldwell, Doug; Bryson, Stephen; Bhavsar,Paresh

    2010-01-01

    We give an overview of the operational concepts and architecture of the Kepler Science Data Pipeline. Designed, developed, operated, and maintained by the Science Operations Center (SOC) at NASA Ames Research Center, the Kepler Science Data Pipeline is central element of the Kepler Ground Data System. The SOC charter is to analyze stellar photometric data from the Kepler spacecraft and report results to the Kepler Science Office for further analysis. We describe how this is accomplished via the Kepler Science Data Pipeline, including the hardware infrastructure, scientific algorithms, and operational procedures. The SOC consists of an office at Ames Research Center, software development and operations departments, and a data center that hosts the computers required to perform data analysis. We discuss the high-performance, parallel computing software modules of the Kepler Science Data Pipeline that perform transit photometry, pixel-level calibration, systematic error-correction, attitude determination, stellar target management, and instrument characterization. We explain how data processing environments are divided to support operational processing and test needs. We explain the operational timelines for data processing and the data constructs that flow into the Kepler Science Data Pipeline.

  9. Kepler Science Operations Center architecture

    NASA Astrophysics Data System (ADS)

    Middour, Christopher; Klaus, Todd C.; Jenkins, Jon; Pletcher, David; Cote, Miles; Chandrasekaran, Hema; Wohler, Bill; Girouard, Forrest; Gunter, Jay P.; Uddin, Kamal; Allen, Christopher; Hall, Jennifer; Ibrahim, Khadeejah; Clarke, Bruce; Li, Jie; McCauliff, Sean; Quintana, Elisa; Sommers, Jeneen; Stroozas, Brett; Tenenbaum, Peter; Twicken, Joseph; Wu, Hayley; Caldwell, Doug; Bryson, Stephen; Bhavsar, Paresh; Wu, Michael; Stamper, Brian; Trombly, Terry; Page, Christopher; Santiago, Elaine

    2010-07-01

    We give an overview of the operational concepts and architecture of the Kepler Science Processing Pipeline. Designed, developed, operated, and maintained by the Kepler Science Operations Center (SOC) at NASA Ames Research Center, the Science Processing Pipeline is a central element of the Kepler Ground Data System. The SOC consists of an office at Ames Research Center, software development and operations departments, and a data center which hosts the computers required to perform data analysis. The SOC's charter is to analyze stellar photometric data from the Kepler spacecraft and report results to the Kepler Science Office for further analysis. We describe how this is accomplished via the Kepler Science Processing Pipeline, including the hardware infrastructure, scientific algorithms, and operational procedures. We present the high-performance, parallel computing software modules of the pipeline that perform transit photometry, pixel-level calibration, systematic error correction, attitude determination, stellar target management, and instrument characterization. We show how data processing environments are divided to support operational processing and test needs. We explain the operational timelines for data processing and the data constructs that flow into the Kepler Science Processing Pipeline.

  10. The Virtual Mission Operations Center

    NASA Technical Reports Server (NTRS)

    Moore, Mike; Fox, Jeffrey

    1994-01-01

    Spacecraft management is becoming more human intensive as spacecraft become more complex and as operations costs are growing accordingly. Several automation approaches have been proposed to lower these costs. However, most of these approaches are not flexible enough in the operations processes and levels of automation that they support. This paper presents a concept called the Virtual Mission Operations Center (VMOC) that provides highly flexible support for dynamic spacecraft management processes and automation. In a VMOC, operations personnel can be shared among missions, the operations team can change personnel and their locations, and automation can be added and removed as appropriate. The VMOC employs a form of on-demand supervisory control called management by exception to free operators from having to actively monitor their system. The VMOC extends management by exception, however, so that distributed, dynamic teams can work together. The VMOC uses work-group computing concepts and groupware tools to provide a team infrastructure, and it employs user agents to allow operators to define and control system automation.

  11. Operator-assisted planning and execution of proximity operations subject to operational constraints

    NASA Technical Reports Server (NTRS)

    Grunwald, Arthur J.; Ellis, Stephen R.

    1991-01-01

    Future multi-vehicle operations will involve multiple scenarios that will require a planning tool for the rapid, interactive creation of fuel-efficient trajectories. The planning process must deal with higher-order, non-linear processes involving dynamics that are often counter-intuitive. The optimization of resulting trajectories can be difficult to envision. An interaction proximity operations planning system is being developed to provide the operator with easily interpreted visual feedback of trajectories and constraints. This system is hosted on an IRIS 4D graphics platform and utilizes the Clohessy-Wiltshire equations. An inverse dynamics algorithm is used to remove non-linearities while the trajectory maneuvers are decoupled and separated in a geometric spreadsheet. The operator has direct control of the position and time of trajectory waypoints to achieve the desired end conditions. Graphics provide the operator with visualization of satisfying operational constraints such as structural clearance, plume impingement, approach velocity limits, and arrival or departure corridors. Primer vector theory is combined with graphical presentation to improve operator understanding of suggested automated system solutions and to allow the operator to review, edit, or provide corrective action to the trajectory plan.

  12. Medical Operations Support for ISS Operations - The Role of the BME Operations Team Leads

    NASA Technical Reports Server (NTRS)

    Janney, Rob; Sabatier, Veronica

    2010-01-01

    This slide presentation reviews the role of the biomedical flight controllers (BMEs), and BME Operations Team Leads (OTLs) in providing medical support for personnel on the International Space Station. This presentation will concentrate on role of the BME OTLs, who provide the integration function across the integration function across all Crew Health Care System (CHeCS) disciplines for operational products and medical procedures.

  13. 14 CFR 27.1583 - Operating limitations.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Operating Limitations and Information Rotorcraft Flight... operation. Each kind of operation for which the rotorcraft and its equipment installations are approved...

  14. 14 CFR 27.1583 - Operating limitations.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Operating Limitations and Information Rotorcraft Flight... operation. Each kind of operation for which the rotorcraft and its equipment installations are approved...

  15. Projection operator based expansion of the evolution operator

    NASA Astrophysics Data System (ADS)

    Semin, Vitalii; Petruccione, Francesco

    2016-10-01

    The not necessarily unitary evolution operator of a finite dimensional quantum system is studied with the help of a projection operators technique. Applying this approach to the Schrödinger equation allows the derivation of an alternative expression for the evolution operator, which differs from the traditional chronological exponent. An appropriate choice of projection operators results in the possibility of studying the diagonal and non-diagonal elements of the evolution operator separately. The suggested expression implies a particular form of perturbation expansion, which leads to a new formula for the short time dynamics. The new kind of perturbation expansion can be used to improve the accuracy of the usual chronological exponent significantly. The evolution operator for any arbitrary time can be efficiently recovered using the semigroup properties. The method is illustrated by two examples, namely the dynamics of a three-level system in two nonresonant laser fields and the calculation of the partition function of a finite XY-spin chain.

  16. Operator-based metric for nuclear operations automation assessment

    SciTech Connect

    Zacharias, G.L.; Miao, A.X.; Kalkan, A.

    1995-04-01

    Continuing advances in real-time computational capabilities will support enhanced levels of smart automation and AI-based decision-aiding systems in the nuclear power plant (NPP) control room of the future. To support development of these aids, we describe in this paper a research tool, and more specifically, a quantitative metric, to assess the impact of proposed automation/aiding concepts in a manner that can account for a number of interlinked factors in the control room environment. In particular, we describe a cognitive operator/plant model that serves as a framework for integrating the operator`s information-processing capabilities with his procedural knowledge, to provide insight as to how situations are assessed by the operator, decisions made, procedures executed, and communications conducted. Our focus is on the situation assessment (SA) behavior of the operator, the development of a quantitative metric reflecting overall operator awareness, and the use of this metric in evaluating automation/aiding options. We describe the results of a model-based simulation of a selected emergency scenario, and metric-based evaluation of a range of contemplated NPP control room automation/aiding options. The results demonstrate the feasibility of model-based analysis of contemplated control room enhancements, and highlight the need for empirical validation.

  17. (abstract) Mission Operations and Control Assurance: Flight Operations Quality Improvements

    NASA Technical Reports Server (NTRS)

    Welz, Linda L.; Bruno, Kristin J.; Kazz, Sheri L.; Witkowski, Mona M.

    1993-01-01

    Mission Operations and Command Assurance (MO&CA), a recent addition to flight operations teams at JPL. provides a system level function to instill quality in mission operations. MO&CA's primary goal at JPL is to help improve the operational reliability for projects during flight. MO&CA tasks include early detection and correction of process design and procedural deficiencies within projects. Early detection and correction are essential during development of operational procedures and training of operational teams. MO&CA's effort focuses directly on reducing the probability of radiating incorrect commands to a spacecraft. Over the last seven years at JPL, MO&CA has become a valuable asset to JPL flight projects. JPL flight projects have benefited significantly from MO&CA's efforts to contain risk and prevent rather than rework errors. MO&CA's ability to provide direct transfer of knowledge allows new projects to benefit directly from previous and ongoing experience. Since MO&CA, like Total Quality Management (TQM), focuses on continuous improvement of processes and elimination of rework, we recommend that this effort be continued on NASA flight projects.

  18. Formalizing procedures for operations automation, operator training and spacecraft autonomy

    NASA Technical Reports Server (NTRS)

    Lecouat, Francois; Desaintvincent, Arnaud

    1994-01-01

    The generation and validation of operations procedures is a key task of mission preparation that is quite complex and costly. This has motivated the development of software applications providing support for procedures preparation. Several applications have been developed at MATRA MARCONI SPACE (MMS) over the last five years. They are presented in the first section of this paper. The main idea is that if procedures are represented in a formal language, they can be managed more easily with a computer tool and some automatic verifications can be performed. One difficulty is to define a formal language that is easy to use for operators and operations engineers. From the experience of the various procedures management tools developed in the last five years (including the POM, EOA, and CSS projects), MMS has derived OPSMAKER, a generic tool for procedure elaboration and validation. It has been applied to quite different types of missions, ranging from crew procedures (PREVISE system), ground control centers management procedures (PROCSU system), and - most relevant to the present paper - satellite operation procedures (PROCSAT developed for CNES, to support the preparation and verification of SPOT 4 operation procedures, and OPSAT for MMS telecom satellites operation procedures).

  19. Spaceflight Operations Services Grid Prototype

    NASA Technical Reports Server (NTRS)

    Bradford, Robert N.; Mehrotra, Piyush; Lisotta, Anthony

    2004-01-01

    NASA over the years has developed many types of technologies and conducted various types of science resulting in numerous variations of operations, data and applications. For example, operations range from deep space projects managed by JPL, Saturn and Shuttle operations managed from JSC and KSC, ISS science operations managed from MSFC and numerous low earth orbit satellites managed from GSFC that are varied and intrinsically different but require many of the same types of services to fulfill their missions. Also, large data sets (databases) of Shuttle flight data, solar system projects and earth observing data exist which because of their varied and sometimes outdated technologies are not and have not been fully examined for additional information and knowledge. Many of the applications/systems supporting operational services e.g. voice, video, telemetry and commanding, are outdated and obsolete. The vast amounts of data are located in various formats, at various locations and range over many years. The ability to conduct unified space operations, access disparate data sets and to develop systems and services that can provide operational services does not currently exist in any useful form. In addition, adding new services to existing operations is generally expensive and with the current budget constraints not feasible on any broad level of implementation. To understand these services a discussion of each one follows. The Spaceflight User-based Services are those services required to conduct space flight operations. Grid Services are those Grid services that will be used to overcome, through middleware software, some or all the problems that currently exists. In addition, Network Services will be discussed briefly. Network Services are crucial to any type of remedy and are evolving adequately to support any technology currently in development.

  20. Development of transportation operations requirements

    SciTech Connect

    Grady, S.T.; Best, R.E.; Danese, F.L.; Peterson, R.W. ); Pope, R.B. )

    1990-01-01

    Transport conditions at various utility sties vary dramatically in terms of characteristics at and near the site, requirements, administrative procedures, and other factors. Continuation of design efforts for the OCRWM transportation operations system requires that the operating requirements for the transportation system -- quantity of fuel per unit time per site -- be identified so that the effect the variations have on the system can be accommodated. The approach outlined in this paper provides for an identification of specific sites, evaluation of shipment capabilities at each site, and integration of the sites into multi-site shipping campaigns to scope the logistics management problem for the transportation operations system. 1 fig., 1 tab.

  1. Reduction operators of Burgers equation

    PubMed Central

    Pocheketa, Oleksandr A.; Popovych, Roman O.

    2013-01-01

    The solution of the problem on reduction operators and nonclassical reductions of the Burgers equation is systematically treated and completed. A new proof of the theorem on the special “no-go” case of regular reduction operators is presented, and the representation of the coefficients of operators in terms of solutions of the initial equation is constructed for this case. All possible nonclassical reductions of the Burgers equation to single ordinary differential equations are exhaustively described. Any Lie reduction of the Burgers equation proves to be equivalent via the Hopf–Cole transformation to a parameterized family of Lie reductions of the linear heat equation. PMID:23576819

  2. Remote Operations Control Center (ROCC)

    NASA Technical Reports Server (NTRS)

    1997-01-01

    Undergraduate students Kristina Wines and Dena Renzo at Rensselaer Poloytech Institute (RPI) in Troy, NY, monitor the progress of the Isothermal Dendritic Growth Experiment (IDGE) during the U.S. Microgravity Payload-4 (USMP-4) mission (STS-87), Nov. 19 - Dec.5, 1997). Remote Operations Control Center (ROCC) like this one will become more common during operations with the International Space Station. The Isothermal Dendritic Growth Experiment (IDGE), flown on three Space Shuttle missions, is yielding new insights into virtually all industrially relevant metal and alloy forming operations. Photo credit: Rensselaer Polytechnic Institute (RPI)

  3. Operations planning simulation: Model study

    NASA Technical Reports Server (NTRS)

    1974-01-01

    The use of simulation modeling for the identification of system sensitivities to internal and external forces and variables is discussed. The technique provides a means of exploring alternate system procedures and processes, so that these alternatives may be considered on a mutually comparative basis permitting the selection of a mode or modes of operation which have potential advantages to the system user and the operator. These advantages are measurements is system efficiency are: (1) the ability to meet specific schedules for operations, mission or mission readiness requirements or performance standards and (2) to accomplish the objectives within cost effective limits.

  4. Designing Facilities for Collaborative Operations

    NASA Technical Reports Server (NTRS)

    Norris, Jeffrey; Powell, Mark; Backes, Paul; Steinke, Robert; Tso, Kam; Wales, Roxana

    2003-01-01

    A methodology for designing operational facilities for collaboration by multiple experts has begun to take shape as an outgrowth of a project to design such facilities for scientific operations of the planned 2003 Mars Exploration Rover (MER) mission. The methodology could also be applicable to the design of military "situation rooms" and other facilities for terrestrial missions. It was recognized in this project that modern mission operations depend heavily upon the collaborative use of computers. It was further recognized that tests have shown that layout of a facility exerts a dramatic effect on the efficiency and endurance of the operations staff. The facility designs (for example, see figure) and the methodology developed during the project reflect this recognition. One element of the methodology is a metric, called effective capacity, that was created for use in evaluating proposed MER operational facilities and may also be useful for evaluating other collaboration spaces, including meeting rooms and military situation rooms. The effective capacity of a facility is defined as the number of people in the facility who can be meaningfully engaged in its operations. A person is considered to be meaningfully engaged if the person can (1) see, hear, and communicate with everyone else present; (2) see the material under discussion (typically data on a piece of paper, computer monitor, or projection screen); and (3) provide input to the product under development by the group. The effective capacity of a facility is less than the number of people that can physically fit in the facility. For example, a typical office that contains a desktop computer has an effective capacity of .4, while a small conference room that contains a projection screen has an effective capacity of around 10. Little or no benefit would be derived from allowing the number of persons in an operational facility to exceed its effective capacity: At best, the operations staff would be underutilized

  5. NOAA's NESDIS operational satellite oceanography

    NASA Astrophysics Data System (ADS)

    Bayler, E.; Chang, P.; Cheney, R.; Clark, D.; Hughes, K.; Strong, A.

    2003-04-01

    Satellite oceanography within the National Oceanic and Atmospheric Administration's (NOAA) National Environmental Satellite, Data, and Information Service (NESDIS) focuses on observation retrieval and applications to address the NOAA missions of environmental assessment, prediction, and stewardship. The satellite oceanography division encompasses three functional areas: satellite ocean sensors, ocean dynamics/ data assimilation, and marine ecosystems / climate. The breadth of scientific investigation includes sea-surface temperature, sea-surface height, sea-surface height, sea-surface roughness, ocean color, ocean surface winds, sea ice, data assimilation, and operational oceanography. The primary objective is to transition research to operations. This overview of operational oceanography within NOAA's NESDIS provides insight into the capabilities, products, and services.

  6. Nuclear Electric Propulsion mission operations.

    NASA Technical Reports Server (NTRS)

    Prickett, W. Z.; Spera, R. J.

    1972-01-01

    Mission operations are presented for comet rendezvous and outer planet exploration missions conducted by unmanned Nuclear Electric Propulsion (NEP) system employing in-core thermionic reactors for electric power generation. The selected reference mission are Comet Halley rendezvous and a Jupiter orbiter at 5.9 planet radii, the orbit of the moon Io. Mission operations and options are defined from spacecraft assembly through mission completion. Pre-launch operations and related GSE requirements are identified. Shuttle launch and subsequent injection to earth escape by the Centaur d-1T are discussed, as well as power plant startup and heliocentric mission phases.

  7. IRIS Mission Operations Director's Colloquium

    NASA Technical Reports Server (NTRS)

    Carvalho, Robert; Mazmanian, Edward A.

    2014-01-01

    Pursuing the Mysteries of the Sun: The Interface Region Imaging Spectrograph (IRIS) Mission. Flight controllers from the IRIS mission will present their individual experiences on IRIS from development through the first year of flight. This will begin with a discussion of the unique nature of IRISs mission and science, and how it fits into NASA's fleet of solar observatories. Next will be a discussion of the critical roles Ames contributed in the mission including spacecraft and flight software development, ground system development, and training for launch. This will be followed by experiences from launch, early operations, ongoing operations, and unusual operations experiences. The presentation will close with IRIS science imagery and questions.

  8. Mind Operational Semantics and Brain Operational Architectonics: A Putative Correspondence

    PubMed Central

    Benedetti, Giulio; Marchetti, Giorgio; Fingelkurts, Alexander A; Fingelkurts, Andrew A

    2010-01-01

    Despite allowing for the unprecedented visualization of brain functional activity, modern neurobiological techniques have not yet been able to provide satisfactory answers to important questions about the relationship between brain and mind. The aim of this paper is to show how two different but complementary approaches, Mind Operational Semantics (OS) and Brain Operational Architectonics (OA), can help bridge the gap between a specific kind of mental activity—the higher-order reflective thought or linguistic thought—and brain. The fundamental notion that allows the two different approaches to be jointly used under a common framework is that of operation. According to OS, which is based on introspection and linguistic data, the meanings of words can be analyzed in terms of elemental mental operations (EOMC), amongst which those of attention play a key role. Linguistic thought is made possible by special kinds of elements, which OS calls “correlators”, which have the function of tying together the other elements of thought, which OS calls “correlata” (a "correlational network” that is, a sentence, is so formed). Therefore, OS conceives of linguistic thought as a hierarchy of operations of increasing complexity. Likewise, according to OA, which is based on the joint analysis of cognitive and electromagnetic data (EEG and MEG), every conscious phenomenon is brought to existence by the joint operations of many functional and transient neuronal assemblies in the brain. According to OA, the functioning of the brain is always operational (made up of operations), and its structure is characterized by a hierarchy of operations of increasing complexity: single neurons, single assemblies of neurons, synchronized neuronal assemblies or Operational Modules (OM), integrated or complex OMs. The authors put forward the hypothesis that the whole level of OS’s description (EOMC, correlators, and correlational networks) corresponds to the level of OMs (or set of them

  9. Developing an Operator Training Program.

    ERIC Educational Resources Information Center

    Wubbena, Robert L.

    1978-01-01

    The study reported is a nationwide comprehensive analysis of the availability of training and the problems associated with the development of effective state programs for operators of water supply and wastewater facilities. (CS)

  10. Reactor operation environmental information document

    SciTech Connect

    Bauer, L.R.; Hayes, D.W.; Hunter, C.H.; Marter, W.L.; Moyer, R.A.

    1989-12-01

    This volume is a reactor operation environmental information document for the Savannah River Plant. Topics include meteorology, surface hydrology, transport, environmental impacts, and radiation effects. 48 figs., 56 tabs. (KD)

  11. Fluid operated quick release mechanism

    NASA Technical Reports Server (NTRS)

    Brown, R. A.

    1972-01-01

    Gas operated release mechanism releases load by fluid pressure to provide positive action quick release. Method can be used with large loads and is useful in repetitive cycling functions where shear pins and similar devices would be cumbersome.

  12. Operation GREENHOUSE-1951. Final report

    SciTech Connect

    Berkhouse, L.; Davis, S.E.; Gladeck, F.R.; Hallowell, J.H.; Jones, C.B.

    1983-06-15

    GREENHOUSE was a four-detonation atmospheric nuclear weapon's test series conducted in the Marshall Islands at Enewetak Atoll in April and May 1951. This is a report of DOD personnel in GREENHOUSE with an emphasis on operational radiological safety.

  13. Tailoring Instrumentation to the Operator.

    ERIC Educational Resources Information Center

    Abplanalp, Glen H.; Menzenhauer, Fred C.

    1978-01-01

    This article provides guidelines in selecting appropriate instrumentation for water treatment facilities. Major areas of concern include: technical operating requirements of the process; equipment design and quality; installations; and mechanical aptitude of personnel. (CS)

  14. DIII-D research operations

    SciTech Connect

    Baker, D.

    1993-05-01

    This report discusses the research on the following topics: DIII-D program overview; divertor and boundary research program; advanced tokamak studies; tokamak physics; operations; program development; support services; contribution to ITER physics R D; and collaborative efforts.

  15. The embedded operating system project

    NASA Technical Reports Server (NTRS)

    Campbell, R. H.

    1985-01-01

    The design and construction of embedded operating systems for real-time advanced aerospace applications was investigated. The applications require reliable operating system support that must accommodate computer networks. Problems that arise in the construction of such operating systems, reconfiguration, consistency and recovery in a distributed system, and the issues of real-time processing are reported. A thesis that provides theoretical foundations for the use of atomic actions to support fault tolerance and data consistency in real-time object-based system is included. The following items are addressed: (1) atomic actions and fault-tolerance issues; (2) operating system structure; (3) program development; (4) a reliable compiler for path Pascal; and (5) mediators, a mechanism for scheduling distributed system processes.

  16. ISS Update: Autonomous Mission Operations

    NASA Video Gallery

    NASA Public Affairs Officer Brandi Dean interviews Jeff Mauldin, Simulation Supervisor for Autonomous Mission Operations at Johnson Space Center in Houston, Texas. Ask us on Twitter @NASA_Johnson a...

  17. Rounding as a Binary Operation.

    ERIC Educational Resources Information Center

    Ross, Joan

    1978-01-01

    The operation of rounding is shown to lead into an investigation of an abstract mathematical system. Properties of the system are discussed and graphs of the rounding function are drawn. Some questions for discussion are given. (MP)

  18. Management of Humeral Shaft Fractures; Non-Operative Versus Operative

    PubMed Central

    Clement, Nicholas D.

    2015-01-01

    Context: Functional humeral bracing remains the gold standard for treatment of humeral shaft fractures. There is an increasing trend in the literature to perform operative fixation of these fractures. Evidence Acquisition: The aim of this systematic review was to compare the level one evidence for the outcome of non-operative with operative management of humeral shaft fractures in adults. A comprehensive electronic literature search of Medline and PubMed was performed with specific inclusion criteria to identify randomized controlled trials. Results: In total, seventeen different studies were identified from the search terms and combinations used. Only one study met the inclusion criteria; however, this was a published study protocol of an ongoing trial currently being conducted. One additional published protocol for an ongoing trial was also identified, but this was for a prospective comparative observational study. Although this latter study may not be level one evidence, it would offer great insight into the functional outcome of humeral shaft fractures and economic implications of operative management, which is currently not addressed in the literature. Two retrospective comparative studies were also identified, one of which demonstrated a significantly lower rate of nonunion and malunion in those patients undergoing operative management. Conclusions: This systematic review demonstrated a deficiency in the current literature of level one evidence available for the management of humeral shaft fractures. The current ongoing randomized control trail would offer a greater insight into the management of humeral shaft fractures and help confirm or refute the current literature. If this randomized control trial affirms the reduction in the rate of nonunion with operative fixation, a cost economic analysis is essential. As it would seem to offer operative management to all patients may be over treatment and not to offer this at all would undertreat. PMID:26401493

  19. Human Mars Surface Science Operations

    NASA Technical Reports Server (NTRS)

    Bobskill, Marianne R.; Lupisella, Mark L.

    2014-01-01

    Human missions to the surface of Mars will have challenging science operations. This paper will explore some of those challenges, based on science operations considerations as part of more general operational concepts being developed by NASA's Human Spaceflight Architecture (HAT) Mars Destination Operations Team (DOT). The HAT Mars DOT has been developing comprehensive surface operations concepts with an initial emphasis on a multi-phased mission that includes a 500-day surface stay. This paper will address crew science activities, operational details and potential architectural and system implications in the areas of (a) traverse planning and execution, (b) sample acquisition and sample handling, (c) in-situ science analysis, and (d) planetary protection. Three cross-cutting themes will also be explored in this paper: (a) contamination control, (b) low-latency telerobotic science, and (c) crew autonomy. The present traverses under consideration are based on the report, Planning for the Scientific Exploration of Mars by Humans1, by the Mars Exploration Planning and Analysis Group (MEPAG) Human Exploration of Mars-Science Analysis Group (HEM-SAG). The traverses are ambitious and the role of science in those traverses is a key component that will be discussed in this paper. The process of obtaining, handling, and analyzing samples will be an important part of ensuring acceptable science return. Meeting planetary protection protocols will be a key challenge and this paper will explore operational strategies and system designs to meet the challenges of planetary protection, particularly with respect to the exploration of "special regions." A significant challenge for Mars surface science operations with crew is preserving science sample integrity in what will likely be an uncertain environment. Crewed mission surface assets -- such as habitats, spacesuits, and pressurized rovers -- could be a significant source of contamination due to venting, out-gassing and

  20. Lease Operations Environmental Guidance Document

    SciTech Connect

    Bureau of Land Management

    2001-02-14

    This report contains discussions in nine different areas as follows: (1) Good Lease Operating Practices; (2) Site Assessment and Sampling; (3) Spills/Accidents; (4) Containment and Disposal of Produced Waters; (5) Restoration of Hydrocarbon Impacted Soils; (6) Restoration of Salt Impacted Soils; (7) Pit Closures; (8) Identification, Removal and Disposal of Naturally Occurring Radioactive Materials (NORM); and (9) Site Closure and Construction Methods for Abandonment Wells/Locations. This report is primary directed towards the operation of oil and gas producing wells.

  1. The Saguaro distributed operating system

    NASA Astrophysics Data System (ADS)

    Andrews, Gregory R.; Schlichting, Richard D.

    1989-05-01

    The progress achieved over the final year of the Saguaro distributed operating system project is presented. The primary achievements were in related research, including SR distributed programming language, the MLP system for constructing distributed mixed-language programs, the Psync interprocess communication mechanism, a configurable operating system kernal called the x-kernal, and the development of language mechanisms for performing failure handling in distributed programming languages.

  2. Operator estimates in homogenization theory

    NASA Astrophysics Data System (ADS)

    Zhikov, V. V.; Pastukhova, S. E.

    2016-06-01

    This paper gives a systematic treatment of two methods for obtaining operator estimates: the shift method and the spectral method. Though substantially different in mathematical technique and physical motivation, these methods produce basically the same results. Besides the classical formulation of the homogenization problem, other formulations of the problem are also considered: homogenization in perforated domains, the case of an unbounded diffusion matrix, non-self-adjoint evolution equations, and higher-order elliptic operators. Bibliography: 62 titles.

  3. Network operating system focus technology

    NASA Technical Reports Server (NTRS)

    1985-01-01

    An activity structured to provide specific design requirements and specifications for the Space Station Data Management System (DMS) Network Operating System (NOS) is outlined. Examples are given of the types of supporting studies and implementation tasks presently underway to realize a DMS test bed capability to develop hands-on understanding of NOS requirements as driven by actual subsystem test beds participating in the overall Johnson Space Center test bed program. Classical operating system elements and principal NOS functions are listed.

  4. Conduct of operations implementation plan

    SciTech Connect

    Anderson, C.K.; Hall, R.L.

    1991-02-20

    This implementation plan describes the process and provides information and schedules that are necessary to implement and comply with the Department of Energy (DOE) Order 5480.19, {open_quotes}Conduct of Operations{close_quotes} (CoOp). This plan applies to all Pinellas Plant operations and personnel. Generally, this Plan discusses how DOE Order 5480.19 will be implemented at the Pinellas Plant.

  5. A primer of offshore operations

    SciTech Connect

    Not Available

    1985-01-01

    This book is written in simple language. It gives information about offshore oil and gas operations by not only describing the operations, but also telling why they are necessary. Techniques and equipment utilized the world over are covered in the colorfully illustrated text, and both English and metric measurements are used. The text includes chapters on exploration, drilling, production and workover, and oil and gas transportation.

  6. Education Payload Operation - Kit D

    NASA Technical Reports Server (NTRS)

    Keil, Matthew

    2009-01-01

    Education Payload Operation - Kit D (EPO-Kit D) includes education items that will be used to support the live International Space Station (ISS) education downlinks and Education Payload Operation (EPO) demonstrations onboard the ISS. The main objective of EPO-Kit D supports the National Aeronautics and Space Administration (NASA) goal of attracting students to study and seek careers in science, technology, engineering, and mathematics.

  7. Space Shuttle operational logistics plan

    NASA Technical Reports Server (NTRS)

    Botts, J. W.

    1983-01-01

    The Kennedy Space Center plan for logistics to support Space Shuttle Operations and to establish the related policies, requirements, and responsibilities are described. The Directorate of Shuttle Management and Operations logistics responsibilities required by the Kennedy Organizational Manual, and the self-sufficiency contracting concept are implemented. The Space Shuttle Program Level 1 and Level 2 logistics policies and requirements applicable to KSC that are presented in HQ NASA and Johnson Space Center directives are also implemented.

  8. Reactor operation safety information document

    SciTech Connect

    Not Available

    1990-01-01

    The report contains a reactor facility description which includes K, P, and L reactor sites, structures, operating systems, engineered safety systems, support systems, and process and effluent monitoring systems; an accident analysis section which includes cooling system anomalies, radioactive materials releases, and anticipated transients without scram; a summary of onsite doses from design basis accidents; severe accident analysis (reactor core disruption); a description of operating contractor organization and emergency planning; and a summary of reactor safety evolution. (MB)

  9. Launch systems operations cost modeling

    NASA Astrophysics Data System (ADS)

    Jacobs, Mark K.

    1999-01-01

    This paper describes the launch systems operations modeling portion of a larger model development effort, NASA's Space Operations Cost Model (SOCM), led by NASA HQ. The SOCM study team, which includes cost and technical experts from each NASA Field Center and various contractors, has been tasked to model operations costs for all future NASA mission concepts including planetary and Earth orbiting science missions, space facilities, and launch systems. The launch systems operations modeling effort has near term significance for assessing affordability of our next generation launch vehicles and directing technology investments, although it provides only a part of the necessary inputs to assess life cycle costs for all elements that determine affordability for a launch system. Presented here is a methodology to estimate requirements associated with a launch facility infrastructure, or Spaceport, from start-up/initialization into steady-state operation. Included are descriptions of the reference data used, the unique estimating methodology that combines cost lookup tables, parametric relationships, and constructively-developed correlations of cost driver input values to collected reference data, and the output categories that can be used by economic and market models. Also, future plans to improve integration of launch vehicle development cost models, reliability and maintainability models, economic and market models, and this operations model to facilitate overall launch system life cycle performance simulations will be presented.

  10. Safe per-operative anticoagulation

    PubMed Central

    Wieberdink, J.

    1967-01-01

    Pre-, per-, and post-operative anticoagulation at the therapeutic level is nowadays the most, if not the only, available effective method to prevent post-operative thrombo-embolism. There is no increased tendency to bleeding to be feared during the operation. The real danger of this prophylaxis consists of a treacherous tendency to acute relative overdosage after the operation. This is explained by the combined indirect action of anticoagulants and influences related to the operation. As its development can accurately be followed by laboratory tests, dangerous levels of anticoagulation can be prevented. Experiences in 242 surgical patients are presented to demonstrate the efficacy of the following post-operative routine: Coagulation studies (prothrombin time or thrombotest) at least twice daily during one week; fractionated administration of anticoagulants and, if necessary, small amounts (0·25-1 mg.) of vitamin K1. The results suggest that with this policy the risk of thrombo-embolism in surgery can be considerably reduced, if not abolished. Images PMID:6076513

  11. The dynamics of operant conditioning.

    PubMed

    Dragoi, V; Staddon, J E

    1999-01-01

    Existing models of operant learning are relatively insensitive to historical properties of behavior and applicable to only limited data sets. This article proposes a minimal set of principles based on short-term and long-term memory mechanisms that can explain the major static and dynamic properties of operant behavior in both single-choice and multiresponse situations. The critical features of the theory are as follows: (a) The key property of conditioning is assessment of the degree of association between responses and reinforcement and between stimuli and reinforcement; (b) the contingent reinforcement is represented by learning expectancy, which is the combined prediction of response-reinforcement and stimulus-reinforcement associations; (c) the operant response is controlled by the interplay between facilitatory and suppressive variables that integrate differences between expected (long-term) and experienced (short-term) events; and (d) very-long-term effects are encoded by a consolidated memory that is sensitive to the entire reinforcement history. The model predicts the major qualitative features of operant phenomena and then suggests an experimental test of theoretical predictions about the joint effects of reinforcement probability and amount of training on operant choice. We hypothesize that the set of elementary principles that we propose may help resolve the long-standing debate about the fundamental variables controlling operant conditioning.

  12. Catalog of Apollo experiment operations

    NASA Technical Reports Server (NTRS)

    Sullivan, Thomas A.

    1994-01-01

    This catalog reviews Apollo mission reports, preliminary science reports, technical crew debriefings, lunar surface operations plans, and various relevant lunar experiment documents, collecting engineering- and operation-specific information by experiment. It is organized by discrete experimental and equipment items emplaced or operated on the lunar surface or at zero gravity during the Apollo missions. It also attempts to summarize some of the general problems encountered on the surface and provides guidelines for the design of future lunar surface experiments with an eye toward operations. Many of the problems dealt with on the lunar surface originated from just a few novel conditions that manifested themselves in various nasty ways. Low gravity caused cables to stick up and get caught on feet, and also made it easy for instruments to tip over. Dust was a problem and caused abrasion, visibility, and thermal control difficulties. Operating in a pressure suit limited a person's activity, especially in the hands. I hope to capture with this document some of the lessons learned from the Apollo era to make the jobs of future astronauts, principle investigators, engineers, and operators of lunar experiments more productive.

  13. TFTR tritium operations lessons learned

    SciTech Connect

    Gentile, C.A.; Raftopoulos, S.; LaMarche, P.

    1996-12-31

    The Tokamak Fusion Test Reactor which is the progenitor for full D-T operating tokamaks has successfully processed > 81 grams of tritium in a safe and efficient fashion. Many of the fundamental operational techniques associated with the safe movement of tritium through the TFTR facility were developed over the course of many years of DOE tritium facilities (LANL, LLNL, SRS, Mound). In the mid 1980`s The Tritium Systems Test Assembly (TSTA) at LANL began reporting operational techniques for the safe handling of tritium, and became a major conduit for the transfer of safe tritium handling technology from DOE weapons laboratories to non-weapon facilities. TFTR has built on many of the TSTA operational techniques and has had the opportunity of performing and enhancing these techniques at America`s first operational D-T fusion reactor. This paper will discuss negative pressure employing `elephant trunks` in the control and mitigation of tritium contamination at the TFTR facility, and the interaction between contaminated line operations and {Delta} pressure control. In addition the strategy employed in managing the movement of tritium through TFTR while maintaining an active tritium inventory of < 50,000 Ci will be discussed. 5 refs.

  14. Space Station overall management approach for operations

    NASA Technical Reports Server (NTRS)

    Paules, G.

    1986-01-01

    An Operations Management Concept developed by NASA for its Space Station Program is discussed. The operational goals, themes, and design principles established during program development are summarized. The major operations functions are described, including: space systems operations, user support operations, prelaunch/postlanding operations, logistics support operations, market research, and cost/financial management. Strategic, tactical, and execution levels of operational decision-making are defined.

  15. Planetary Radars Operating Centre PROC

    NASA Astrophysics Data System (ADS)

    Catallo, C.; Flamini, E.; Seu, R.; Alberti, G.

    2007-12-01

    Planetary exploration by means of radar systems, mainly using Ground Penetrating Radars (GPR) plays an important role in Italy. Numerous scientific international space programs are currently carried out jointly with ESA and NASA by Italian Space Agency, the scientific community and the industry. Three important experiments under Italian leadership ( designed and manufactured by the Italian industry), provided by ASI either as contribution to ESA programs either within a NASA/ASI joint venture framework, are now operating: MARSIS on-board Mars Express, SHARAD on-board Mars Reconnaissance Orbiter and CASSINI Radar on-board Cassini spacecraft. In order to support all the scientific communities, institutional customers and experiment teams operation three Italian dedicated operational centers have been realized, namely SHOC, (Sharad Operating Centre), MOC (Marsis Operating Center) and CASSINI PAD ( Processing Altimetry Data). Each center is dedicated to a single instrument management and control, data processing and distribution. Although they had been conceived to operate autonomously and independently one from each other, synergies and overlaps have been envisaged leading to the suggestion of a unified center, the Planetary Radar Processing Center (PROC). PROC is conceived in order to include the three operational centers, namely SHOC, MOC and CASSINI PAD, either from logistics point of view and from HW/SW capabilities point of view. The Planetary Radar Processing Center shall be conceived as the Italian support facility to the scientific community for on-going and future Italian planetary exploration programs. Therefore, scalability, easy use and management shall be the design drivers. The paper describes how PROC is designed and developed, to allow SHOC, MOC and CASSINI PAD to operate as before, and to offer improved functionalities to increase capabilities, mainly in terms of data exchange, comparison, interpretation and exploitation. Furthermore, in the frame of

  16. Mission operations and command assurance: Flight operations quality improvements

    NASA Technical Reports Server (NTRS)

    Welz, Linda L.; Bruno, Kristin J.; Kazz, Sheri L.; Potts, Sherrill S.; Witkowski, Mona M.

    1994-01-01

    Mission Operations and Command Assurance (MO&CA) is a Total Quality Management (TQM) task on JPL projects to instill quality in flight mission operations. From a system engineering view, MO&CA facilitates communication and problem-solving among flight teams and provides continuous solving among flight teams and provides continuous process improvement to reduce risk in mission operations by addressing human factors. The MO&CA task has evolved from participating as a member of the spacecraft team, to an independent team reporting directly to flight project management and providing system level assurance. JPL flight projects have benefited significantly from MO&CA's effort to contain risk and prevent rather than rework errors. MO&CA's ability to provide direct transfer of knowledge allows new projects to benefit from previous and ongoing flight experience.

  17. Defense waste processing facility radioactive operations. Part 1 - operating experience

    SciTech Connect

    Little, D.B.; Gee, J.T.; Barnes, W.M.

    1997-12-31

    The Savannah River Site`s Defense Waste Processing Facility (DWPF) near Aiken, SC is the nation`s first and the world`s largest vitrification facility. Following a ten year construction program and a 3 year non-radioactive test program, DWPF began radioactive operations in March 1996. This paper presents the results of the first 9 months of radioactive operations. Topics include: operations of the remote processing equipment reliability, and decontamination facilities for the remote processing equipment. Key equipment discussed includes process pumps, telerobotic manipulators, infrared camera, Holledge{trademark} level gauges and in-cell (remote) cranes. Information is presented regarding equipment at the conclusion of the DWPF test program it also discussed, with special emphasis on agitator blades and cooling/heating coil wear. 3 refs., 4 figs.

  18. From Operational Ceilometer Network to Operational Lidar Network

    NASA Astrophysics Data System (ADS)

    Adam, Mariana; Turp, Myles; Horseman, Andrew; Ordóñez, Carlos; Buxmann, Joelle; Sugier, Jacqueline

    2016-06-01

    During the eruption of Eyjafjallajökull in 2010, the Met Office ceilometers (Laser Cloud Based Recorders - LCBR) provided reasonable information about volcanic ash plumes over the United Kingdom [1]. This capability triggered the development of an operational system to provide quick looks of the range corrected signals (RCS) in near-real-time (NRT). Moreover, the Met Office acquired eleven Jenoptik ceilometers to supplement the operational ceilometer network. The combined network became operational in 2012 and currently comprises a total of 43 ceilometers reporting backscatter profiles in NRT. In 2013, Civil Aviation Authority (CAA) and the Department for transport (DfT) sponsored the acquisition of 9 fixed lidars and one mobile unit (each accompanied by a sunphotometer), to further improve the quantitative monitoring of volcanic ash. The current status of both ceilometer and lidar/sun-photometer networks is discussed and further developments are proposed.

  19. 10 CFR 55.45 - Operating tests.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Operating tests. 55.45 Section 55.45 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) OPERATORS' LICENSES Written Examinations and Operating Tests § 55.45 Operating tests. (a) Content. The operating tests administered to applicants for operator and...

  20. Orthogonality preserving infinite dimensional quadratic stochastic operators

    SciTech Connect

    Akın, Hasan; Mukhamedov, Farrukh

    2015-09-18

    In the present paper, we consider a notion of orthogonal preserving nonlinear operators. We introduce π-Volterra quadratic operators finite and infinite dimensional settings. It is proved that any orthogonal preserving quadratic operator on finite dimensional simplex is π-Volterra quadratic operator. In infinite dimensional setting, we describe all π-Volterra operators in terms orthogonal preserving operators.

  1. Overview of KSTAR initial operation

    SciTech Connect

    Kwon, M.; Oh, Y. K.; Yang, H. L.; Na, H. K.; Kim, Y. S.; Kwak, J. G.; Kim, W. C.; Kim, J. Y.; Ahn, Joonwook; Ahn, J.W.; Bae, Y. S.; Baek, S. H.; Bak, J. G.; Bang, E. N.; Chang, C. S.; Chang, D. H.; Chavdarovski, I.; Chen, Z. Y.; Cho, K. W.; Cho, M. H.; Choe, W.; Choi, J. H.; Chu, Y.; Chung, K. S.; Diamond, P. H.; Do, H. J.; Eidietis, N. W.; England, A. C.; Grisham, L.; Hahm, T. S.; Hahn, S. H.; Han, W. S.; Hatae, T.; Hillis, D. L.; Hong, J. S.; Hong, S. H.

    2011-01-01

    Since the successful first plasma generation in the middle of 2008, three experimental campaigns were successfully made for the KSTAR device, accompanied with a necessary upgrade in the power supply, heating, wall-conditioning and diagnostic systems. KSTAR was operated with the toroidal magnetic field up to 3.6 T and the circular and shaped plasmas with current up to 700 kA and pulse length of 7 s, have been achieved with limited capacity of PF magnet power supplies. The mission of the KSTAR experimental program is to achieve steady-state operations with high performance plasmas relevant to ITER and future reactors. The first phase (2008 2012) of operation of KSTAR is dedicated to the development of operational capabilities for a super-conducting device with relatively short pulse. Development of start-up scenario for a super-conducting tokamak and the understanding of magnetic field errors on start-up are one of the important issues to be resolved. Some specific operation techniques for a super-conducting device are also developed and tested. The second harmonic pre-ionization with 84 and 110 GHz gyrotrons is an example. Various parameters have been scanned to optimize the pre-ionization. Another example is the ICRF wall conditioning (ICWC), which was routinely applied during the shot to shot interval. The plasma operation window has been extended in terms of plasma beta and stability boundary. The achievement of high confinement mode was made in the last campaign with the first neutral beam injector and good wall conditioning. Plasma control has been applied in shape and position control and now a preliminary kinetic control scheme is being applied including plasma current and density. Advanced control schemes will be developed and tested in future operations including active profiles, heating and current drives and control coil-driven magnetic perturbation.

  2. Overview of KSTAR initial operation

    SciTech Connect

    Kwon, M.; Oh, Y. K.; Yang, H. L.; Na, H. K.; Kim, Y. S.; Ahn, J.W.; Hillis, D. L.

    2011-01-01

    Since the successful first plasma generation in the middle of 2008, three experimental campaigns were successfully made for the KSTAR device, accompanied with a necessary upgrade in the power supply, heating, wall-conditioning and diagnostic systems. KSTAR was operated with the toroidal magnetic field up to 3.6 T and the circular and shaped plasmas with current up to 700 kA and pulse length of 7 s, have been achieved with limited capacity of PF magnet power supplies. The mission of the KSTAR experimental program is to achieve steady-state operations with high performance plasmas relevant to ITER and future reactors. The first phase (2008-2012) of operation of KSTAR is dedicated to the development of operational capabilities for a super-conducting device with relatively short pulse. Development of start-up scenario for a super-conducting tokamak and the understanding of magnetic field errors on start-up are one of the important issues to be resolved. Some specific operation techniques for a super-conducting device are also developed and tested. The second harmonic pre-ionization with 84 and 110 GHz gyrotrons is an example. Various parameters have been scanned to optimize the pre-ionization. Another example is the ICRF wall conditioning (ICWC), which was routinely applied during the shot to shot interval. The plasma operation window has been extended in terms of plasma beta and stability boundary. The achievement of high confinement mode was made in the last campaign with the first neutral beam injector and good wall conditioning. Plasma control has been applied in shape and position control and now a preliminary kinetic control scheme is being applied including plasma current and density. Advanced control schemes will be developed and tested in future operations including active profiles, heating and current drives and control coil-driven magnetic perturbation.

  3. Weak {}^* convergence of operator means

    NASA Astrophysics Data System (ADS)

    Romanov, Alexandr V.

    2011-12-01

    For a linear operator U with \\Vert U^n\\Vert \\le \\operatorname{const} on a Banach space X we discuss conditions for the convergence of ergodic operator nets T_\\alpha corresponding to the adjoint operator U^* of U in the {W^*O}-topology of the space \\operatorname{End} X^*. The accumulation points of all possible nets of this kind form a compact convex set L in \\operatorname{End} X^*, which is the kernel of the operator semigroup G=\\overline{\\operatorname{co}}\\,\\Gamma_0, where \\Gamma_0=\\{U_n^*, n \\ge 0\\}. It is proved that all ergodic nets T_\\alpha weakly {}^* converge if and only if the kernel L consists of a single element. In the case of X=C(\\Omega) and the shift operator U generated by a continuous transformation \\varphi of a metrizable compactum \\Omega we trace the relationships among the ergodic properties of U, the structure of the operator semigroups L, G and \\Gamma=\\overline{\\Gamma}_0, and the dynamical characteristics of the semi-cascade (\\varphi,\\Omega). In particular, if \\operatorname{card}L=1, then a) for any \\omega \\in\\Omega the closure of the trajectory \\{\\varphi^n\\omega, n \\ge 0\\} contains precisely one minimal set m, and b) the restriction (\\varphi,m) is strictly ergodic. Condition a) implies the {W^*O}-convergence of any ergodic sequence of operators T_n \\in \\operatorname{End} X^* under the additional assumption that the kernel of the enveloping semigroup E(\\varphi,\\Omega) contains elements obtained from the `basis' family of transformations \\{\\varphi^n, n \\ge 0\\} of the compact set \\Omega by using some transfinite sequence of sequential passages to the limit.

  4. Small Aircraft Transportation System, Higher Volume Operations Concept: Normal Operations

    NASA Technical Reports Server (NTRS)

    Abbott, Terence S.; Jones, Kenneth M.; Consiglio, Maria C.; Williams, Daniel M.; Adams, Catherine A.

    2004-01-01

    This document defines the Small Aircraft Transportation System (SATS), Higher Volume Operations (HVO) concept for normal conditions. In this concept, a block of airspace would be established around designated non-towered, non-radar airports during periods of poor weather. Within this new airspace, pilots would take responsibility for separation assurance between their aircraft and other similarly equipped aircraft. Using onboard equipment and procedures, they would then approach and land at the airport. Departures would be handled in a similar fashion. The details for this operational concept are provided in this document.

  5. Operational Interventions to Maintenance Error

    NASA Technical Reports Server (NTRS)

    Kanki, Barbara G.; Walter, Diane; Dulchinos, VIcki

    1997-01-01

    A significant proportion of aviation accidents and incidents are known to be tied to human error. However, research of flight operational errors has shown that so-called pilot error often involves a variety of human factors issues and not a simple lack of individual technical skills. In aircraft maintenance operations, there is similar concern that maintenance errors which may lead to incidents and accidents are related to a large variety of human factors issues. Although maintenance error data and research are limited, industry initiatives involving human factors training in maintenance have become increasingly accepted as one type of maintenance error intervention. Conscientious efforts have been made in re-inventing the team7 concept for maintenance operations and in tailoring programs to fit the needs of technical opeRAtions. Nevertheless, there remains a dual challenge: 1) to develop human factors interventions which are directly supported by reliable human error data, and 2) to integrate human factors concepts into the procedures and practices of everyday technical tasks. In this paper, we describe several varieties of human factors interventions and focus on two specific alternatives which target problems related to procedures and practices; namely, 1) structured on-the-job training and 2) procedure re-design. We hope to demonstrate that the key to leveraging the impact of these solutions comes from focused interventions; that is, interventions which are derived from a clear understanding of specific maintenance errors, their operational context and human factors components.

  6. Mars Pathfinder mission operations concepts

    NASA Technical Reports Server (NTRS)

    Sturms, Francis M., Jr.; Dias, William C.; Nakata, Albert Y.; Tai, Wallace S.

    1994-01-01

    The Mars Pathfinder Project plans a December 1996 launch of a single spacecraft. After jettisoning a cruise stage, an entry body containing a lander and microrover will directly enter the Mars atmosphere and parachute to a hard landing near the sub-solar latitude of 15 degrees North in July 1997. Primary surface operations last for 30 days. Cost estimates for Pathfinder ground systems development and operations are not only lower in absolute dollars, but also are a lower percentage of total project costs than in past planetary missions. Operations teams will be smaller and fewer than typical flight projects. Operations scenarios have been developed early in the project and are being used to guide operations implementation and flight system design. Recovery of key engineering data from entry, descent, and landing is a top mission priority. These data will be recorded for playback after landing. Real-time tracking of a modified carrier signal through this phase can provide important insight into the spacecraft performance during entry, descent, and landing in the event recorded data is never recovered. Surface scenarios are dominated by microrover activity and lander imaging during 7 hours of the Mars day from 0700 to 1400 local solar time. Efficient uplink and downlink processes have been designed to command the lander and microrover each Mars day.

  7. STS Derived Exploration Launch Operations

    NASA Technical Reports Server (NTRS)

    Best, Joel; Sorge, L.; Siders, J.; Sias, Dave

    2004-01-01

    A key aspect of the new space exploration programs will be the approach to optimize launch operations. A STS Derived Launch Vehicle (SDLV) Program can provide a cost effective, low risk, and logical step to launch all of the elements of the exploration program. Many benefits can be gained by utilizing the synergy of a common launch site as an exploration spaceport as well as evolving the resources of the current Space Shuttle Program (SSP) to meet the challenges of the Vision for Space Exploration. In particular, the launch operation resources of the SSP can be transitioned to the exploration program and combined with the operations efficiencies of unmanned EELVs to obtain the best of both worlds, resulting in lean launch operations for crew and cargo missions of the exploration program. The SDLV Program would then not only capture the extensive human space flight launch operations knowledge, but also provide for the safe fly-out of the SSP through continuity of system critical skills, manufacturing infrastructure, and ability to maintain and attract critical skill personnel. Thus, a SDLV Program can smoothly transition resources from the SSP and meet the transportation needs to continue the voyage of discovery of the space exploration program.

  8. Psychological aspects of peacekeeping operations

    PubMed Central

    Raju, M. S. V. K.

    2014-01-01

    Peacekeeping operations are but one aspect of the systems of peace that have evolved over the past seven decades in a world that is riven with violence of all kinds. With the end of cold war in the late eighties of the last century we have come to see much intrastate violence, in addition to usual interstate hostilities and war, arising out of religious, political, ethnic and economic differences between people. In the changed scenario peacekeeping operations have become complex politico-military-humanitarian efforts. A soldier, trained for conventional military operations, is obliged to participate in the unconventional operations of waging peace in alien lands often in volatile and violent situations and in the process he stands to get exposed to widely variable demands for adjustment that have the potential to bring to the fore many maladaptive responses. Peacekeeping operations also have the potential to offer opportunities for growth and resilience. India is a major player in peacekeeping activities for well over sixty years all over the world. It is necessary for the commanders and mental health professionals to understand the multifarious factors that impinge on the peacekeeping soldier's mind and the emerging patterns of responses thereof for effective management trained manpower and fulfillment of mission objectives PMID:25788805

  9. Psychological aspects of peacekeeping operations.

    PubMed

    Raju, M S V K

    2014-01-01

    Peacekeeping operations are but one aspect of the systems of peace that have evolved over the past seven decades in a world that is riven with violence of all kinds. With the end of cold war in the late eighties of the last century we have come to see much intrastate violence, in addition to usual interstate hostilities and war, arising out of religious, political, ethnic and economic differences between people. In the changed scenario peacekeeping operations have become complex politico-military-humanitarian efforts. A soldier, trained for conventional military operations, is obliged to participate in the unconventional operations of waging peace in alien lands often in volatile and violent situations and in the process he stands to get exposed to widely variable demands for adjustment that have the potential to bring to the fore many maladaptive responses. Peacekeeping operations also have the potential to offer opportunities for growth and resilience. India is a major player in peacekeeping activities for well over sixty years all over the world. It is necessary for the commanders and mental health professionals to understand the multifarious factors that impinge on the peacekeeping soldier's mind and the emerging patterns of responses thereof for effective management trained manpower and fulfillment of mission objectives. PMID:25788805

  10. Co-Operative Education or Co-Operative Placement?

    ERIC Educational Resources Information Center

    Dickson, C. R.

    The Co-operative Education Department at Mohawk College is designed to extend the academic learning process into the workplace through on-the-job learning experiences which enhance the students' vocational maturation and personal development, and are integrated with the learning objectives of the program. The department offers paid, supervised…

  11. The Accommodation Operation. Accommodation Management Module. Operational Management Programme.

    ERIC Educational Resources Information Center

    Chapman, Janet

    This module on accommodation operation is intended to help supervisors or managers achieve a balance in the day-to-day running of the premises and plan for a smooth and successful future. Much of the material is concerned with the housekeeping aspects of accommodation management. The material is presented in a self-instructional format in seven…

  12. Autonomous Satellite Operations Via Secure Virtual Mission Operations Center

    NASA Technical Reports Server (NTRS)

    Miller, Eric; Paulsen, Phillip E.; Pasciuto, Michael

    2011-01-01

    The science community is interested in improving their ability to respond to rapidly evolving, transient phenomena via autonomous rapid reconfiguration, which derives from the ability to assemble separate but collaborating sensors and data forecasting systems to meet a broad range of research and application needs. Current satellite systems typically require human intervention to respond to triggers from dissimilar sensor systems. Additionally, satellite ground services often need to be coordinated days or weeks in advance. Finally, the boundaries between the various sensor systems that make up such a Sensor Web are defined by such things as link delay and connectivity, data and error rate asymmetry, data reliability, quality of service provisions, and trust, complicating autonomous operations. Over the past ten years, researchers from the NASA Glenn Research Center (GRC), General Dynamics, Surrey Satellite Technology Limited (SSTL), Cisco, Universal Space Networks (USN), the U.S. Geological Survey (USGS), the Naval Research Laboratory, the DoD Operationally Responsive Space (ORS) Office, and others have worked collaboratively to develop a virtual mission operations capability. Called VMOC (Virtual Mission Operations Center), this new capability allows cross-system queuing of dissimilar mission unique systems through the use of a common security scheme and published application programming interfaces (APIs). Collaborative VMOC demonstrations over the last several years have supported the standardization of spacecraft to ground interfaces needed to reduce costs, maximize space effects to the user, and allow the generation of new tactics, techniques and procedures that lead to responsive space employment.

  13. Cognitive ergonomics of operational tools

    NASA Astrophysics Data System (ADS)

    Lüdeke, A.

    2012-10-01

    Control systems have become increasingly more powerful over the past decades. The availability of high data throughput and sophisticated graphical interactions has opened a variety of new possibilities. But has this helped to provide intuitive, easy to use applications to simplify the operation of modern large scale accelerator facilities? We will discuss what makes an application useful to operation and what is necessary to make a tool easy to use. We will show that even the implementation of a small number of simple application design rules can help to create ergonomic operational tools. The author is convinced that such tools do indeed help to achieve higher beam availability and better beam performance at accelerator facilities.

  14. Pre-operative electrocardiograph examination.

    PubMed Central

    Nash, G. F.; Cunnick, G. H.; Allen, S.; Cook, C.; Turner, L. F.

    2001-01-01

    The leading cause of death following surgery is a cardiac event, and an electrocardiogram is the most common pre-operative test to investigate coronary artery disease. Fifty adults, who required an electrocardiogram, undergoing general surgical procedures, were recruited into this pilot study, which investigated the examination rate of electrocardiographs by doctors pre-operatively. Each tracing was folded in one corner and a paperclip prevented full pre-operative viewing without its removal. Results suggest that 30% of ECGs were not opened and the records of 58% patients overall had no mention of the ECG having been performed. Further analysis showed no correlation with the examination rate of the electrocardiograph with patient age or fitness. If this reflects normal clinical practice, it is sub-optimal use of resources and warrants further audit. PMID:11777129

  15. Performing a local barrier operation

    DOEpatents

    Archer, Charles J; Blocksome, Michael A; Ratterman, Joseph D; Smith, Brian E

    2014-03-04

    Performing a local barrier operation with parallel tasks executing on a compute node including, for each task: retrieving a present value of a counter; calculating, in dependence upon the present value of the counter and a total number of tasks performing the local barrier operation, a base value of the counter, the base value representing the counter's value prior to any task joining the local barrier; calculating, in dependence upon the base value and the total number of tasks performing the local barrier operation, a target value, the target value representing the counter's value when all tasks have joined the local barrier; joining the local barrier, including atomically incrementing the value of the counter; and repetitively, until the present value of the counter is no less than the target value of the counter: retrieving the present value of the counter and determining whether the present value equals the target value.

  16. Performing a local barrier operation

    DOEpatents

    Archer, Charles J; Blocksome, Michael A; Ratterman, Joseph D; Smith, Brian E

    2014-03-04

    Performing a local barrier operation with parallel tasks executing on a compute node including, for each task: retrieving a present value of a counter; calculating, in dependence upon the present value of the counter and a total number of tasks performing the local barrier operation, a base value, the base value representing the counter's value prior to any task joining the local barrier; calculating, in dependence upon the base value and the total number of tasks performing the local barrier operation, a target value of the counter, the target value representing the counter's value when all tasks have joined the local barrier; joining the local barrier, including atomically incrementing the value of the counter; and repetitively, until the present value of the counter is no less than the target value of the counter: retrieving the present value of the counter and determining whether the present value equals the target value.

  17. Differential operator in seizure detection.

    PubMed

    Majumdar, Kaushik

    2012-01-01

    Differential operators can detect significant changes in signals. This has been utilized to enhance the contrast of the seizure signatures in depth EEG or ECoG. We have actually taken normalized exponential of absolute value of single or double derivative of epileptic ECoG. This in short we call differential filtering. Windowed variance operation has been performed to automatically detect seizure onset on differentially filtered signal. A novel method for determining the duration of seizure has also been proposed. Since all operations take only linear time, the whole method is extremely fast. Seven empirical parameters have been introduced whose patient specific thresholding brings down the rate of false detection to a bare minimum. Results of implementation of the methods on the ECoG data of four epileptic patients have been reported with an ROC curve analysis. High value of the area under the ROC curve indicates excellent detection performance.

  18. AO operations at Gemini South

    NASA Astrophysics Data System (ADS)

    Marin, Eduardo; Cardwell, Andrew; Pessev, Peter

    2014-08-01

    The 8m Gemini South telescope is entering an exciting new era of AO operations, which put it at the forefront of astronomical AO in terms of both wide field AO, and extreme-AO systems. Major milestones achieved were the successful commissioning of GeMS, in 2012, and GPI, in late 2013 and early 2014. Currently we are operating two of the worlds most advanced astronomical AO systems. Gemini, running primarily in queue, must balance the promise of AO with the demands of the community to use non-AO instruments. We discuss the current state of the two AO systems, and their operational models. The preparations that go into planning each AO run, the difficulties in scheduling around non-AO instruments, and the differences between scheduling LGS AO and non-LGS AO are discussed.

  19. Operative treatment of congenital torticollis.

    PubMed

    Shim, J S; Jang, H P

    2008-07-01

    There were 47 patients with congenital muscular torticollis who underwent operative release. After a mean follow-up of 74 months (60 to 90), they were divided into two groups, one aged one to four years (group 1) and the other aged five to 16 years (group 2). The outcomes were assessed by evaluating the following parameters: deficits of lateral flexion and rotation, craniofacial asymmetry, surgical scarring, residual contracture, subjective evaluation and degree of head tilt. The craniofacial asymmetry, residual contracture, subjective evaluation and overall scores were similar in both groups. However, group 2 showed superior results to group 1 in terms of the deficits of movement, surgical scarring and degree of head tilt. It is recommended that operative treatment for congenital muscular torticollis is postponed until the patient can comply successfully with post-operative bracing and an exercise programme.

  20. Twenty Years of Tevatron Operation

    SciTech Connect

    Jay C. Theilacker

    2004-07-15

    The superconducting Tevatron accelerator at Fermi National Accelerator Laboratory (Fermilab) has surpassed twenty years of operation. The Tevatron is still the highest energy particle accelerator in the world and will remain so until the commissioning of the LHC in Europe later this decade. The Tevatron has operated in a Fixed Target mode, accelerating a proton beam into stationary targets/detectors, as well as a Colliding Beam mode, continuously colliding counter rotating beams of protons and antiprotons. Upon completion, the Tevatron cryogenic system became the world's largest helium refrigeration system. In 1993, the Tevatron cryogenic system was given the designation of International Historic Mechanical Engineering Landmark by the American Society of Mechanical Engineers. The operational history, experiences and statistics of the Tevatron, with an emphasis on the cryogenic system, is presented. Improvements, upgrades and current challenges of the cryogenic system are discussed.

  1. Lower operating temperatures oxidize VOCs

    SciTech Connect

    Chen, J.

    1996-12-01

    Regenerative catalytic oxidation (RCO) is a new volatile organic compound (VOC) abatement technology that is gaining acceptance in plants where energy costs are high and hours of operation are long. By combining the features of thermal and catalytic oxidation, RCO technology provides an efficient and cost-effective solution to air pollution problems in a variety of industries where hours of operation reach 4,000 annually, and the challenge is growing to reduce energy and operating costs, yet comply with increasingly stringent VOC control regulations. These may include: printed circuit board fabrication (laminate manufacturing), printing (lithography and flexography), coating (cans, coils and fabrics), forest products (production of woods ranging from plywood to medium- and high-density fiberboard) and automotive OEM (spray-paint booths) and component manufacturing (parts spray-painting, resin components, adhesive components, miscellaneous metalworking applications).

  2. Scans as primitive parallel operations

    SciTech Connect

    Blelloch, G.E. . Dept. of Computer Science)

    1989-11-01

    In most parallel random access machine (PRAM) models, memory references are assumed to take unit time. In practice, and in theory, certain scan operations, also known as prefix computations, can execute in no more time than these parallel memory references. This paper outlines an extensive study of the effect of including, in the PRAM models, such scan operations as unit-time primitives. The study concludes that the primitives improve the asymptotic running time of many algorithms by an O(log n) factor greatly simplify the description of many algorithms, and are significantly easier to implement than memory references. The authors argue that the algorithm designer should feel free to use these operations as if they were as cheap as a memory reference. This paper describes five algorithms that clearly illustrate how the scan primitives can be used in algorithm design. These all run on an EREW PRAM with the addition of two scan primitives.

  3. Property testing of unitary operators

    SciTech Connect

    Wang Guoming

    2011-11-15

    In this paper, we systematically study property testing of unitary operators. We first introduce a distance measure that reflects the average difference between unitary operators. Then we show that, with respect to this distance measure, the orthogonal group, quantum juntas (i.e., unitary operators that only nontrivially act on a few qubits of the system), and the Clifford group can be all efficiently tested. In fact, their testing algorithms have query complexities independent of the system's size and have only one-sided error. Then we give an algorithm that tests any finite subset of the unitary group, and demonstrate an application of this algorithm to the permutation group. This algorithm also has one-sided error and polynomial query complexity, but it is unknown whether it can be efficiently implemented in general.

  4. Cubesat Proximity Operations Demonstration (CPOD)

    NASA Technical Reports Server (NTRS)

    Villa, Marco; Martinez, Andres; Petro, Andrew

    2015-01-01

    The CubeSat Proximity Operations Demonstration (CPOD) project will demonstrate rendezvous, proximity operations and docking (RPOD) using two 3-unit (3U) CubeSats. Each CubeSat is a satellite with the dimensions 4 inches x 4 inches x 13 inches (10 centimeters x 10 centimeters x 33 centimeters) and weighing approximately 11 pounds (5 kilograms). This flight demonstration will validate and characterize many new miniature low-power proximity operations technologies applicable to future missions. This mission will advance the state of the art in nanosatellite attitude determination,navigation and control systems, in addition to demonstrating relative navigation capabilities.The two CPOD satellites are scheduled to be launched together to low-Earth orbit no earlier than Dec. 1, 2015.

  5. Mission management aircraft operations manual

    NASA Technical Reports Server (NTRS)

    1992-01-01

    This manual prescribes the NASA mission management aircraft program and provides policies and criteria for the safe and economical operation, maintenance, and inspection of NASA mission management aircraft. The operation of NASA mission management aircraft is based on the concept that safety has the highest priority. Operations involving unwarranted risks will not be tolerated. NASA mission management aircraft will be designated by the Associate Administrator for Management Systems and Facilities. NASA mission management aircraft are public aircraft as defined by the Federal Aviation Act of 1958. Maintenance standards, as a minimum, will meet those required for retention of Federal Aviation Administration (FAA) airworthiness certification. Federal Aviation Regulation Part 91, Subparts A and B, will apply except when requirements of this manual are more restrictive.

  6. Pre-operative electrocardiograph examination.

    PubMed

    Nash, G F; Cunnick, G H; Allen, S; Cook, C; Turner, L F

    2001-11-01

    The leading cause of death following surgery is a cardiac event, and an electrocardiogram is the most common pre-operative test to investigate coronary artery disease. Fifty adults, who required an electrocardiogram, undergoing general surgical procedures, were recruited into this pilot study, which investigated the examination rate of electrocardiographs by doctors pre-operatively. Each tracing was folded in one corner and a paperclip prevented full pre-operative viewing without its removal. Results suggest that 30% of ECGs were not opened and the records of 58% patients overall had no mention of the ECG having been performed. Further analysis showed no correlation with the examination rate of the electrocardiograph with patient age or fitness. If this reflects normal clinical practice, it is sub-optimal use of resources and warrants further audit.

  7. EDF field operation computerization study

    SciTech Connect

    Guillot, L.; Pirus, D.

    2006-07-01

    The main control room has been the subject of extensive research and actions into improved operations assistance. On the other hand, few studies concern the need for field operation improvements, which have few assistance resources adapted to working requirements. Why? Past studies have shown the inability of technology to assume job constraints (insufficient screen readability, excessive equipment weight, prohibitive response times). Nevertheless, today new technologies can be adapted to field operations, and they justify further study. Real needs exist: local operations are often complex and are led in difficult environments where conditions prevent the use of paper-based documents. The issue is a significant risk of error which might impact plant reliability. The cumbersome nature of paper procedures, the working environment and the operational feed-back of experience led us to concentrate on the field operation to identify how it may be improved by the use of these new technologies. Such equipment would allow a better traceability and quality of actions. Possibility of communications with other plant personnel and information sharing may be also immediately available for all. This paper presents a study which intends to collect assistance requirements through an analysis of working practices and organizations with local personnel. Our aim is to identify which of those might benefit from IT support. This collection was obtained through interviews and observations. These two methods helped us to define potential needs, constraints and consequences for work organization. This paper presents the study results and findings, identifies professions which may benefit from the use of wearable computers and describes how the reliability and efficiency of human actions would be improved. Finally we identify design requirements and criteria to be used for writing the technical specifications for a test prototype. (authors)

  8. Electric Vehicle Site Operator Program

    SciTech Connect

    Not Available

    1992-01-01

    Kansas State University, with funding support from federal, state, public, and private companies, is participating in the Department of Energy's Electric Vehicle Site Operator Program. Through participation is this program, Kansas State is demonstrating, testing, and evaluating electric or hybrid vehicle technology. This participation will provide organizations the opportunity to examine the latest EHV prototypes under actual operating conditions. KSU proposes to purchase one (1) electric or hybrid van and four (4) electric cars during the first two years of this five year program. KSU has purchased one G-Van built by Conceptor Industries, Toronto, Canada and has initiated a procurement order to purchase two (2) Soleq 1992 Ford EVcort stationwagons.

  9. Electric Vehicle Site Operator Program

    NASA Astrophysics Data System (ADS)

    1992-05-01

    Kansas State University, with funding support from federal, state, public, and private companies, is participating in the Department of Energy's Electric Vehicle Site Operator Program. Through participation is this program, Kansas State is demonstrating, testing, and evaluating electric or hybrid vehicle technology. This participation will provide organizations the opportunity to examine the latest EHV prototypes under actual operating conditions. KSU proposes to purchase one electric or hybrid van and four electric cars during the first two years of this five year program. KSU has purchased one G-Van built by Conceptor Industries, Toronto, Canada and has initiated a procurement order to purchase two Soleq 1992 Ford EVcort stationwagons.

  10. ARIES NDA Robot operators` manual

    SciTech Connect

    Scheer, N.L.; Nelson, D.C.

    1998-05-01

    The ARIES NDA Robot is an automation device for servicing the material movements for a suite of Non-destructive assay (NDA) instruments. This suite of instruments includes a calorimeter, a gamma isotopic system, a segmented gamma scanner (SGS), and a neutron coincidence counter (NCC). Objects moved by the robot include sample cans, standard cans, and instrument plugs. The robot computer has an RS-232 connection with the NDA Host computer, which coordinates robot movements and instrument measurements. The instruments are expected to perform measurements under the direction of the Host without operator intervention. This user`s manual describes system startup, using the main menu, manual operation, and error recovery.

  11. Star City, Russia Medical Operations

    NASA Technical Reports Server (NTRS)

    Chandler, Michael R.; Senter, Cedric H.; Roden, Sean K.; Gilmore, Stevan; Powers, William E.; Alexander, David J.

    2004-01-01

    Since the beginning of the NASA/Mir missions, NASA has had astronauts in training at the Gagarin Cosmonaut Training Center (GCTC), also known as Star City, with crewmembers currently there to train for the International Space Station missions. Agreements have been reached with all International Partners that allow the crewmember's parent agency to provide a flight surgeon to oversee crewmember health and safety during training away from home. NASA Medical Operations through the Bioastronautics Contract employs flight surgeons to provide medical support for U.S. crewmembers and their support staff. This poster presentation reviews the aspects of NASA medical operations at Star City.

  12. Diverless remote operated flowline connections

    SciTech Connect

    Johnson, R.; Slider, M.; Galle, G.

    1997-07-01

    The diverless remote horizontal connection for a major project in the South China Sea was performed using the ABB Vetco Gray GSR connector in conjunction with a pull-in tool. New, innovative methods were developed whereby the hubs provide axial and angular misalignment capabilities and an ROV can make and break the connection and replace the innovative magnetic sealing assembly. The significance of this achievement is assessed with a focus on the implemented design philosophies, the principles of operation, the overall system reliability, the operational cost reduction, and the full-scale testing results. Additional comments are made concerning the applicability of this technology in various other subsea applications.

  13. Electrochemical cell operation and system

    DOEpatents

    Maru, Hansraj C.

    1980-03-11

    Thermal control in fuel cell operation is affected through sensible heat of process gas by providing common input manifolding of the cell gas flow passage in communication with the cell electrolyte and an additional gas flow passage which is isolated from the cell electrolyte and in thermal communication with a heat-generating surface of the cell. Flow level in the cell gas flow passage is selected based on desired output electrical energy and flow level in the additional gas flow passage is selected in accordance with desired cell operating temperature.

  14. Hardware and operating features of the adaptive wall test section for the 0.3-meter transonic cryogenic tunnel

    NASA Technical Reports Server (NTRS)

    Mineck, Raymond E.

    1989-01-01

    A 13- by 13-inch adaptive wall test section was installed in the Langley 0.3-Meter Transonic Cryogenic Tunnel circuit. This test section has four solid walls and is configured for two-dimensional airfoil testing. The top and bottom walls are flexible and movable, whereas the sidwalls are rigid and fixed. The test section has a turntable to support airfoil models, a survey mechanism to probe the model wake, and provisions for a sidewall boundary-layer-control system. Details of the adaptive wall test section, the tunnel circuit modifications, the supporting instrumentation, the monitoring and control hardware, and the wall adaptation strategy are discussed. Sample results of shakedown tests with the test section empty and with an airfoil installed are also included.

  15. 14 CFR 119.23 - Operators engaged in passenger-carrying operations, cargo operations, or both with airplanes when...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... operations, cargo operations, or both with airplanes when common carriage is not involved. 119.23 Section 119... operations, cargo operations, or both with airplanes when common carriage is not involved. (a) Each person who conducts operations when common carriage is not involved with airplanes having a...

  16. Fulfilling Operational Requirements for Operational Aerosol Data Assimilation (Invited)

    NASA Astrophysics Data System (ADS)

    Westphal, D. L.; Campbell, J.; Reid, J. S.; Hyer, E.; Zhang, J.; Winker, D. M.

    2010-12-01

    Chemical weather forecasting (CWF) requires initialization and validation data. The intent of most algorithm developers, however, is in retrieving a value for each pixel. Data assimilation for CWF has different satellite data requirements such as lower latency, reduced bias, coarser spatial resolution, and increased requirements for error characterization. Typical acceptable latency is 3 hours, with 6 hours being the maximum. Though not an original requirement, special efforts by the MODIS, MISR, and CALIPSO data teams have made these data available with nearly the required latency. The spatial resolution needs to match that of the model or the phenomena, whichever is coarser, so that 10 km or even 1/2 degree resolution is often suitable. The assumptions made during the quest for retrieving every pixel become an intrinsic part of the product such that a model-ready dataset cannot be derived from the original dataset by simply under-sampling or averaging the data or by applying the available quality control flags. Efforts to create a model-ready dataset have evolved around screening out data since retrieving from the level 1 data is currently impractical due to data volume and latency issues. Instead, efforts to create model-ready datasets have evolved around screening out data and reprocessing and registering what is left to the model grid. As a result, would-be users have been forced to become developers, validators, and distributors, and hence are essentially running their own data center. In this talk, we will present the modifications that were required to adapt MODIS AOD, MISR AOD, and CALIPSO products for operational use. Considering the rising importance of aerosol in climate studies and in CWF, and for the sake of efficiency and progress, the findings from these current investigations should be welcomed by the data centers and readily implemented as improvements to the existing algorithms (or as an alternate parallel algorithm) to produce operational, model

  17. Operant Variability and Voluntary Action

    ERIC Educational Resources Information Center

    Neuringer, Allen; Jensen, Greg

    2010-01-01

    A behavior-based theory identified 2 characteristics of voluntary acts. The first, extensively explored in operant-conditioning experiments, is that voluntary responses produce the reinforcers that control them. This bidirectional relationship--in which reinforcer depends on response and response on reinforcer--demonstrates the functional nature…

  18. Risk assessment in international operations

    SciTech Connect

    Stricklin, Daniela L.

    2008-11-15

    During international peace-keeping missions, a diverse number of non-battle hazards may be encountered, which range from heavily polluted areas, endemic disease, toxic industrial materials, local violence, traffic, and even psychological factors. Hence, elevated risk levels from a variety of sources are encountered during deployments. With the emphasis within the Swedish military moving from national defense towards prioritization of international missions in atypical environments, the risk of health consequences, including long term health effects, has received greater consideration. The Swedish military is interested in designing an optimal approach for assessment of health threats during deployments. The Medical Intelligence group at FOI CBRN Security and Defence in Umea has, on request from and in collaboration with the Swedish Armed Forces, reviewed a variety of international health threat and risk assessment models for military operations. Application of risk assessment methods used in different phases of military operations will be reviewed. An overview of different international approaches used in operational risk management (ORM) will be presented as well as a discussion of the specific needs and constraints for health risk assessment in military operations. This work highlights the specific challenges of risk assessment that are unique to the deployment setting such as the assessment of exposures to a variety of diverse hazards concurrently.

  19. An Operating Environmental Health Program

    NASA Technical Reports Server (NTRS)

    Lipana, J. G.; Masters, R. L.; Winter, W. R.

    1971-01-01

    Some concepts of an operational program for medical and environmental health are outlined. Medical services of this program are primarily concerned with emergency care, laboratory examinations, advice to private physician with patient permission, medical monitoring activities, and suggestions for treatment or control of the malfunction.

  20. Government Documents Departmental Operations Guide.

    ERIC Educational Resources Information Center

    Wilson, John S.; And Others

    This manual for the operation and maintenance of the Government Documents Department at Baylor University's Moody Memorial Library is divided into 13 topical sections. The guide opens with the collection development policy statement, which covers the general collection, the maps division, and weeding government documents. Technical processing…

  1. Keep an Eye on Operations.

    ERIC Educational Resources Information Center

    Hill, Douglas Roman

    1990-01-01

    A Nevada school board has instituted an internal audit committee to review how well the school system is operating, financially and otherwise. Describes committee organization and suggests a code of conduct for school systems that addresses the following situations: gifts, influence, conflict of interest, privy information, and confidentiality.…

  2. Operational Management of Area Environment.

    ERIC Educational Resources Information Center

    Sprague, George W.

    Three phases leading to the automation of the mechanical building systems on the Harvard campus are described. The systems allow a single operator to monitor and control all the mechanical systems, plus fire, flood, and security alarms, for all buildings in a large area of the campus. (JT)

  3. Environmental Resource Compendium: Operation Earth.

    ERIC Educational Resources Information Center

    Public Broadcasting Service, Washington, DC.

    The "Year of the Environment" outreach campaign--OPERATION EARTH--is designed to encourage local and individual involvement in environmental activities and to enable public television stations, along with educators and local environmental groups, to develop local outreach plans which meet the environmental needs of the community they serve. This…

  4. School Facilities Maintenance and Operations.

    ERIC Educational Resources Information Center

    Association of School Business Officials of the United States and Canada, Park Ridge, IL. Research Corp.

    This publication presents a series of field-proven school energy conservation, management, maintenance, and operations practices and ideas. Also included are the names, addresses, and phone numbers of individuals and organizations to contact for more detailed information. The brief summaries are grouped into six sections. "Planning and Managing…

  5. Cognitive Performance in Operational Environments

    NASA Technical Reports Server (NTRS)

    Russo, Michael; McGhee, James; Friedler, Edna; Thomas, Maria

    2005-01-01

    Optimal cognition during complex and sustained operations is a critical component for success in current and future military operations. "Cognitive Performance, Judgment, and Decision-making" (CPJD) is a newly organized U.S. Army Medical Research and Materiel Command research program focused on sustaining operational effectiveness of Future Force Warriors by developing paradigms through which militarily-relevant, higher-order cognitive performance, judgment, and decision-making can be assessed and sustained in individuals, small teams, and leaders of network-centric fighting units. CPJD evaluates the impact of stressors intrinsic to military operational environments (e.g., sleep deprivation, workload, fatigue, temperature extremes, altitude, environmental/physiological disruption) on military performance, evaluates noninvasive automated methods for monitoring and predicting cognitive performance, and investigates pharmaceutical strategies (e.g., stimulant countermeasures, hypnotics) to mitigate performance decrements. This manuscript describes the CPJD program, discusses the metrics utilized to relate militarily applied research findings to academic research, and discusses how the simulated combat capabilities of a synthetic battle laboratory may facilitate future cognitive performance research.

  6. Richland Operations Office technology summary

    SciTech Connect

    Not Available

    1994-05-01

    This document has been prepared by the Department of Energy`s Environmental Management Office of Technology Development to highlight its research, development, demonstration, testing, and evaluation activities funded through the Richland Operations Office. Technologies and processes described have the potential to enhance cleanup and waste management efforts.

  7. Delta nitrogen tetroxide fueling operations

    NASA Technical Reports Server (NTRS)

    Grigsby, R. B.; Cross, T. M.; Rucci, T. D.

    1978-01-01

    The development of the Delta second stage nitrogen tetroxide fueling system is briefly summarized. The nitrogen tetroxide fueling system and the equipment used to protect the spacecraft environment from the toxic nitrogen tetroxide fumes are described. Topics covered include: the nitrogen tetroxide transfer system; loading operations; safety precautions; and chemical treatment of all toxic vapors.

  8. Manually operated elastomer heat pump

    NASA Technical Reports Server (NTRS)

    Hutchinson, W. D.

    1970-01-01

    Device consisting of a rotating mechanism, a frame with multiple wide bands of rubber, and a fluid bath, demonstrates the feasibility of a human operated device capable of cooling or producing heat. This invention utilizes the basic thermodynamic properties of natural rubber.

  9. Signal and Image Processing Operations

    1995-05-10

    VIEW is a software system for processing arbitrary multidimensional signals. It provides facilities for numerical operations, signal displays, and signal databasing. The major emphasis of the system is on the processing of time-sequences and multidimensional images. The system is designed to be both portable and extensible. It runs currently on UNIX systems, primarily SUN workstations.

  10. NTREES Testing and Operations Status

    NASA Technical Reports Server (NTRS)

    Emrich, Bill

    2007-01-01

    Nuclear Thermal Rockets or NTR's have been suggested as a propulsion system option for vehicles traveling to the moon or Mars. These engines are capable of providing high thrust at specific impulses at least twice that of today's best chemical engines. The performance constraints on these engines are mainly the result of temperature limitations on the fuel coupled with a limited ability to withstand chemical attack by the hot hydrogen propellant. To operate at maximum efficiency, fuel forms are desired which can withstand the extremely hot, hostile environment characteristic of NTR operation for at least several hours. The simulation of such an environment would require an experimental device which could simultaneously approximate the power, flow, and temperature conditions which a nuclear fuel element (or partial element) would encounter during NTR operation. Such a simulation would allow detailed studies of the fuel behavior and hydrogen flow characteristics under reactor like conditions to be performed. Currently, the construction of such a simulator has been completed at the Marshall Space Flight Center, and will be used in the future to evaluate a wide variety of fuel element designs and the materials of which they are fabricated. This present work addresses the operational status of the Nuclear Thermal Rocket Element Environmental Simulator or NTREES and some of the design considerations which were considered prior to and during its construction.

  11. Automating Space Station operations planning

    NASA Technical Reports Server (NTRS)

    Ziemer, Kathleen A.

    1989-01-01

    The development and implementation of the operations planning processes for the Space Station are discussed. A three level planning process, consisting of strategic, tactical, and execution level planning, is being developed. The integration of the planning procedures into a tactical planning system is examined and the planning phases are illustrated.

  12. Optimising costs in WLCG operations

    NASA Astrophysics Data System (ADS)

    Alandes Pradillo, María; Dimou, Maria; Flix, Josep; Forti, Alessandra; Sciabà, Andrea

    2015-12-01

    The Worldwide LHC Computing Grid project (WLCG) provides the computing and storage resources required by the LHC collaborations to store, process and analyse the 50 Petabytes of data annually generated by the LHC. The WLCG operations are coordinated by a distributed team of managers and experts and performed by people at all participating sites and from all the experiments. Several improvements in the WLCG infrastructure have been implemented during the first long LHC shutdown to prepare for the increasing needs of the experiments during Run2 and beyond. However, constraints in funding will affect not only the computing resources but also the available effort for operations. This paper presents the results of a detailed investigation on the allocation of the effort in the different areas of WLCG operations, identifies the most important sources of inefficiency and proposes viable strategies for optimising the operational cost, taking into account the current trends in the evolution of the computing infrastructure and the computing models of the experiments.

  13. Science operations with Space Telescope

    NASA Astrophysics Data System (ADS)

    Giacconi, R.

    1982-08-01

    The operation, instrumentation, and expected contributions of the Space Telescope are discussed. Space Telescope capabilities are described. The organization and nature of the Space Telescope Science Institute are outlined, including the allocation of observing time and the data rights and data access policies of the institute.

  14. English for Petrochemical Plant Operators.

    ERIC Educational Resources Information Center

    Bynum, Henri Sue

    The development of a program and curriculum for instruction in technical English for Saudi Arabian petrochemical plant operator trainees studying in the United States for two years was undertaken by the University of South Alabama's English Language Center. The program was designed to accommodate (1) the degree of skills and prior learning of the…

  15. Operation REDWING 1956. Technical report

    SciTech Connect

    Bruce-Henderson, S.; Gladeck, F.R.; Hallowell, J.H.; Martin, E.J.; McMullan, F.W.

    1982-08-01

    REDWING was a 17-detonation atmospheric nuclear weapons test series conducted in the Marshall Islands at Enewetak and Bikini atolls in spring and summer 1956. This is a report of DOD personnel in REDWING with an emphasis on operations and radiological safety.

  16. Redesigning the District Operating System

    ERIC Educational Resources Information Center

    Hodas, Steven

    2015-01-01

    In this paper, we look at the inner workings of a school district through the lens of the "district operating system (DOS)," a set of interlocking mutually-reinforcing modules that includes functions like procurement, contracting, data and IT policy, the general counsel's office, human resources, and the systems for employee and family…

  17. Operating Costs of Educational Facilities.

    ERIC Educational Resources Information Center

    Isler, Norman P.

    The references included were drawn from the documents received and processed to date by the ERIC Clearinghouse on Educational Facilities, and are organized into the following sections--(1) school business, (2) maintenance and operations, (3) insurance programs, (4) property accounting, (5) purchasing, and (6) food service. (FS)

  18. Transparent communications permit unmanned operations

    SciTech Connect

    1995-07-01

    Not-normally-manned platforms are not a new development. However, their use in harsher environments has until recently, been limited. Development of reliable communications networks capable of handling the large amounts of data required for process control in real time with distributed control systems (DCSs) has been a key factor in making the concept viable for harsher, more remote environments. The article below examines the transparent communications network and DCS installed on Pickerill field, offshore UK, by Fisher-Rosemount Systems and its operational parameters. Pickerill field, some 50 mi off the Lincolnshire coast, comprises two small unmanned platforms producing gas under remote control from Arco`s operations base at Great Yarmouth about 60 mi south. Reliable communication is required both with the two platforms offshore and with Conoco`s gas processing operators at Theddlethorpe. Fundamental to project success was the ability of the process control system to provide entirely secure and transparent communication with equipment offshore and thus enable operators at Great Yarmouth to interact with the process as if it were local to their control center.

  19. Simulating Operations at a Spaceport

    NASA Technical Reports Server (NTRS)

    Nevins, Michael R.

    2007-01-01

    SPACESIM is a computer program for detailed simulation of operations at a spaceport. SPACESIM is being developed to greatly improve existing spaceports and to aid in designing, building, and operating future spaceports, given that there is a worldwide trend in spaceport operations from very expensive, research- oriented launches to more frequent commercial launches. From an operational perspective, future spaceports are expected to resemble current airports and seaports, for which it is necessary to resolve issues of safety, security, efficient movement of machinery and people, cost effectiveness, timeliness, and maximizing effectiveness in utilization of resources. Simulations can be performed, for example, to (1) simultaneously analyze launches of reusable and expendable rockets and identify bottlenecks arising from competition for limited resources or (2) perform what-if scenario analyses to identify optimal scenarios prior to making large capital investments. SPACESIM includes an object-oriented discrete-event-simulation engine. (Discrete- event simulation has been used to assess processes at modern seaports.) The simulation engine is built upon the Java programming language for maximum portability. Extensible Markup Language (XML) is used for storage of data to enable industry-standard interchange of data with other software. A graphical user interface facilitates creation of scenarios and analysis of data.

  20. Operant conditioning in redwinged blackbirds.

    PubMed

    Bastian, C W; Hothersall, D

    1970-09-01

    An operant conditioning technique for use with passerine birds is described. Two redwinged blackbirds were successfully conditioned to perch-hop for food reinforcement. Continuous reinforcement and fixed-ratio schedules involving substantial ratio requirements were used to maintain this response. The behavior of the two redwinged blackbirds was comparable to that of more conventional organisms working on similar schedules of reinforcement.

  1. OTF Mission Operations Prototype Status

    NASA Technical Reports Server (NTRS)

    Reynolds, Walter F.; Lucord, Steven A.; Stevens, John E.

    2009-01-01

    Reports on the progress of the JSC/OTF prototype of a CCSDS SM&C protocol based communications link between two space flight operations control centers. Varied implementations using software architectures from current web enterprise venues are presented. The AMS protocol (CCSDS Blue Book standard 735.1) was used for messaging and link communications.

  2. Risk assessment in international operations.

    PubMed

    Stricklin, Daniela L

    2008-11-15

    During international peace-keeping missions, a diverse number of non-battle hazards may be encountered, which range from heavily polluted areas, endemic disease, toxic industrial materials, local violence, traffic, and even psychological factors. Hence, elevated risk levels from a variety of sources are encountered during deployments. With the emphasis within the Swedish military moving from national defense towards prioritization of international missions in atypical environments, the risk of health consequences, including long term health effects, has received greater consideration. The Swedish military is interested in designing an optimal approach for assessment of health threats during deployments. The Medical Intelligence group at FOI CBRN Security and Defence in Umeå has, on request from and in collaboration with the Swedish Armed Forces, reviewed a variety of international health threat and risk assessment models for military operations. Application of risk assessment methods used in different phases of military operations will be reviewed. An overview of different international approaches used in operational risk management (ORM) will be presented as well as a discussion of the specific needs and constraints for health risk assessment in military operations. This work highlights the specific challenges of risk assessment that are unique to the deployment setting such as the assessment of exposures to a variety of diverse hazards concurrently. PMID:18325560

  3. Pupillometric measurement of operator workload

    NASA Technical Reports Server (NTRS)

    Beatty, J.

    1981-01-01

    Pupillometry as a method of measuring workload is described. Pupillometric measures provide an indication of momentary fluctuations in central nervous system excitability that occur as cognitive operations are performed; the magnitude of these changes may serve as a sensitive indicator of the workload imposed by cognitive tasks.

  4. Operating and Maintaining the Greenhouse.

    ERIC Educational Resources Information Center

    Gresser, Priscilla A.

    This learning guide is designed to assist vocational agriculture students in mastering 20 tasks involved in the operation and maintenance of a greenhouse. Addressed in the individual sections of the guide are the following topics: identification of greenhouse designs, greenhouse construction, basic greenhouse maintenance to conserve energy,…

  5. Metrics for Numerical Control Operators.

    ERIC Educational Resources Information Center

    Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

    Designed to meet the job-related metric measurement needs of students preparing to be numerical control operators, this instructional package is one of eight for the manufacturing occupations cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know the occupational…

  6. Metrics for Key Punch Operators.

    ERIC Educational Resources Information Center

    Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

    Designed to meet the job-related metric measurement needs of key punch operator students, this instructional package is one of three for the business and office occupations cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know the occupational terminology,…

  7. Operation of large cryogenic systems

    SciTech Connect

    Rode, C.H.; Ferry, B.; Fowler, W.B.; Makara, J.; Peterson, T.; Theilacker, J.; Walker, R.

    1985-06-01

    This report is based on the past 12 years of experiments on R and D and operation of the 27 kW Fermilab Tevatron Cryogenic System. In general the comments are applicable for all helium plants larger than 1000W (400 l/hr) and non mass-produced nitrogen plants larger than 50 tons per day. 14 refs., 3 figs., 1 tab.

  8. OPERATION ALPHABET 2, TEACHER'S GUIDE.

    ERIC Educational Resources Information Center

    COATES, ROBERT H., ED.

    STEPS IN TEACHING EACH LESSON IN OPERATION ALPHABET 2, A SERIES OF WORKBOOKS FOR ADULTS LEARNING TO READ AND WRITE, ARE OUTLINE--STIMULATING INTEREST, NEW WORDS, SILENT READING, QUESTIONING FOR COMPREHENSION, REEXAMINATION OF NEW WORDS, READING EXERCISES, WRITING PRACTICE, AND PARAGRAPH WRITING. LESSON PLANS FOR BOTH VOLUMES ARE INCLUDED. THIS…

  9. OPERATION ALPHABET 1, TEACHER'S GUIDE.

    ERIC Educational Resources Information Center

    COATES, ROBERT H., ED.

    THE TEACHER'S GUIDE PROVIDES SUGGESTIONS FOR INTRODUCING EACH OF THE 100 LESSONS IN OPERATION ALPHABET 1, A WORKBOOK TO HELP ADULTS LEARN TO READ AND WRITE. IT LISTS MATERIALS NEEDED, AND OUTLINES THE PRESENTATION AND WRITING PRACTICE. AN INTRODUCTORY SECTION COVERS ABILITY GROUPING WITHIN A CLASS, READING RATES, AND GUIDEPOSTS TO GOOD TEACHING OF…

  10. Operations with the FUSE observatory

    NASA Astrophysics Data System (ADS)

    Blair, William P.; Kruk, Jeffrey W.; Moos, Henry W.; Oegerle, William R.

    2003-02-01

    The Far Ultraviolet Spectroscopic Explorer satellite (FUSE) is a NASA Origins mission launched on 1999 June 24 and operated from the Johns Hopkins University Homewood campus in Baltimore, MD. FUSE consists of four aligned telescopes feeding twin far-ultraviolet spectrographs that achieve a spectral resolution of R=20,000 over the 905-1187 Å spectral region. This makes FUSE complementary to the Hubble Space Telescope and of broad general interest to the astronomical community. FUSE is operated as a general-purpose observatory with proposals evaluated and selected by NASA. The FUSE mission concept evolved dramatically over time. The version of FUSE that was built and flown was born out of the "faster, better, cheaper" era, which drove not only the mission development but also plans for operations. Fixed price contracts, a commercial spacecraft, and operations in the University environment were all parts of the low cost strategy. The satellite performs most functions autonomously, with ground contacts limited typically to seven 12-minute contacts per day through a dedicated ground station. All support functions are managed by a staff of 40 scientists and engineers located at Johns Hopkins. In this configuration, we have been able to achieve close to 30% average on-target science efficiency. In short, FUSE is a successful example of the "faster, better, cheaper" philosophy.

  11. Heel pain--operative results.

    PubMed

    Baxter, D E; Thigpen, C M

    1984-01-01

    In 6 years through 1982, the authors performed 34 operative cases in 26 patients with recalcitrant heel pain. The operative procedure involves an isolated neurolysis of the mixed nerve supplying the abductor digiti quinti muscle as it passes beneath the abductor hallucis muscle and beneath the medial ridge of the calcaneus. The deep fascia of the abductor hallucis muscle is released routinely, and an impinging heel spur or tight plantar fascia is partially removed or released if it is causing entrapment of the nerve. The biomechanical pathogenesis of heel pain in relation to pes planus and pes cavus predisposing to an entrapment neuropathy is described, and the anatomy of the heel in relation to the nerve distribution is clarified and well illustrated. Of the 34 operated heels, 32 had good results and two had poor results. Heel pain can cause total disability in the working population and may jeopardize one's employment or professional athletic career. The authors believe operative treatment has a place in the care of recalcitrant heel pain and that an entrapment neuropathy is an etiological factor in heel pain.

  12. An Operational Definition of Learning

    ERIC Educational Resources Information Center

    Harel, Guershon; Koichu, Boris

    2010-01-01

    An operational definition offered in this paper posits learning as a multi-dimensional and multi-phase phenomenon occurring when individuals attempt to solve what they view as a problem. To model someone's learning accordingly to the definition, it suffices to characterize a particular sequence of that person's disequilibrium-equilibrium phases in…

  13. Operate a Nuclear Power Plant.

    ERIC Educational Resources Information Center

    Frimpter, Bonnie J.; And Others

    1983-01-01

    Describes classroom use of a computer program originally published in Creative Computing magazine. "The Nuclear Power Plant" (runs on Apple II with 48K memory) simulates the operating of a nuclear generating station, requiring students to make decisions as they assume the task of managing the plant. (JN)

  14. Robotic concepts for urban operations

    NASA Astrophysics Data System (ADS)

    Digney, Bruce L.; Penzes, Steven G.

    2002-07-01

    While land vehicles in open terrains is currently the primary military operation, it is expected that an increasing number of conflicts will occur in urban setting. Urban robots must operate under mobility, communication, perception and control conditions far more demanding than their open terrain counterparts. The Defense Research Establishment Suffield (DRES) is being tasked to develop robots, unmanned vehicles and supports system to aid the Canadian Forces in urban operations. In preparation for this role DRES personnel were invited to participate in operation Urban Ram, a large urban war game held on the grounds of CFB Griesbach in Edmonton. This paper presents the lessons learned at Urban Ram as to what roles robots could fulfill and the challenges of urban environments that must be overcome. Also presented will be robotic concepts inspired by Urban Ram, specifically discussed will be High Utility Robotics (HUR), which combines geometric shape shifting with function morphing to provide the general purpose, high mobility and broad application robots required for urban environments.

  15. SSC Test Operations Contract Overview

    NASA Technical Reports Server (NTRS)

    Kleim, Kerry D.

    2010-01-01

    This slide presentation reviews the Test Operations Contract at the Stennis Space Center (SSC). There are views of the test stands layouts, and closer views of the test stands. There are descriptions of the test stand capabilities, some of the other test complexes, the Cryogenic propellant storage facility, the High Pressure Industrial Water (HPIW) facility, and Fluid Component Processing Facility (FCPF).

  16. Machine Tool Operation, Course Description.

    ERIC Educational Resources Information Center

    Denny, Walter E.; Anderson, Floyd L.

    Prepared by an instructor and curriculum specialists, this course of study was designed to meet the individual needs of the dropout and/or hard-core unemployed youth by providing them skill training, related information, and supportive services knowledge in machine tool operation. The achievement level of each student is determined at entry, and…

  17. COE1 Calorimeter Operations Manual

    SciTech Connect

    Santi, Peter Angelo

    2015-12-15

    The purpose of this manual is to describe the operations of the COE1 calorimeter which is used to measure the thermal power generated by the radioactive decay of plutonium-bearing materials for the purposes of assaying the amount of plutonium within the material.

  18. Delayed Reinforcement of Operant Behavior

    ERIC Educational Resources Information Center

    Lattal, Kennon A.

    2010-01-01

    The experimental analysis of delay of reinforcement is considered from the perspective of three questions that seem basic not only to understanding delay of reinforcement but also, by implication, the contributions of temporal relations between events to operant behavior. The first question is whether effects of the temporal relation between…

  19. Operative treatment of Brodie's abscess.

    PubMed

    Dunn, E C; Singer, L

    1991-01-01

    This manuscript deals with a unique operative management of unilateral Brodie's abscess in a 16-year-old male. Brodie's abscess is a common finding in childhood osteomyelitis. A review of the radiographic appearance, clinical presentation, and surgical management is presented.

  20. Extensions of the operational method

    SciTech Connect

    Silver, G.L.

    1986-08-25

    The operational method of data analysis is used to develop new formulas for first and second derivatives on equidistant, curvilinear data consisting of three or more measurements. Echo functions are used to suggest the paths followed by moving data points, and a method of interpolating into rectangles by non-Euclidean geometry is proposed. 5 refs., 5 tabs.

  1. Computer-Analyzed Custodial Operations.

    ERIC Educational Resources Information Center

    Ross, Dave

    1984-01-01

    A computer program utilized to generate detailed reports of labor requirements saved almost $700,000 in custodial labor costs for the Facilities Maintenance and Operations Division of Oakland County, Michigan. The program also is used for a quality-control audit system during inspections to evaluate cleaned rooms. (MLF)

  2. Ground Operations Aerospace Language (GOAL)

    NASA Technical Reports Server (NTRS)

    1973-01-01

    GOAL, is a test engineer oriented language designed to be used to standardize procedure terminology and as the test programming language to be used for ground checkout operations in a space vehicle launch environment. The material presented concerning GOAL includes: (1) a historical review, (2) development objectives and requirements, (3) language scope and format, and (4) language capabilities.

  3. SIRTF Science Operations System Design

    NASA Technical Reports Server (NTRS)

    Green, William

    1999-01-01

    SIRTF Science Operations System Design William B. Green Manager, SIRTF Science Center California Institute of Technology M/S 310-6 1200 E. California Blvd., Pasadena CA 91125 (626) 395 8572 Fax (626) 568 0673 bgreen@ipac.caltech.edu. The Space Infrared Telescope Facility (SIRTF) will be launched in December 2001, and perform an extended series of science observations at wavelengths ranging from 20 to 160 microns for five years or more. The California Institute of Technology has been selected as the home for the SIRTF Science Center (SSC). The SSC will be responsible for evaluating and selecting observation proposals, providing technical support to the science community, performing mission planning and science observation scheduling activities, instrument calibration during operations and instrument health monitoring, production of archival quality data products, and management of science research grants. The science payload consists of three instruments delivered by instrument Principal Investigators located at University of Arizona, Cornell, and Harvard Smithsonian Astrophysical Observatory. The SSC is responsible for design, development, and operation of the Science Operations System (SOS) which will support the functions assigned to the SSC by NASA. The SIRTF spacecraft, mission profile, and science instrument design have undergone almost ten years of refinement. SIRTF development and operations activities are highly cost constrained. The cost constraints have impacted the design of the SOS in several ways. The Science Operations System has been designed to incorporate a set of efficient, easy to use tools which will make it possible for scientists to propose observation sequences in a rapid and automated manner. The use of highly automated tools for requesting observations will simplify the long range observatory scheduling process, and the short term scheduling of science observations. Pipeline data processing will be highly automated and data

  4. Rosetta mission operations for landing

    NASA Astrophysics Data System (ADS)

    Accomazzo, Andrea; Lodiot, Sylvain; Companys, Vicente

    2016-08-01

    The International Rosetta Mission of the European Space Agency (ESA) was launched on 2nd March 2004 on its 10 year journey to comet Churyumov-Gerasimenko and has reached it early August 2014. The main mission objectives were to perform close observations of the comet nucleus throughout its orbit around the Sun and deliver the lander Philae to its surface. This paper describers the activities at mission operations level that allowed the landing of Philae. The landing preparation phase was mainly characterised by the definition of the landing selection process, to which several parties contributed, and by the definition of the strategy for comet characterisation, the orbital strategy for lander delivery, and the definition and validation of the operations timeline. The definition of the landing site selection process involved almost all components of the mission team; Rosetta has been the first, and so far only mission, that could not rely on data collected by previous missions for the landing site selection. This forced the teams to include an intensive observation campaign as a mandatory part of the process; several science teams actively contributed to this campaign thus making results from science observations part of the mandatory operational products. The time allocated to the comet characterisation phase was in the order of a few weeks and all the processes, tools, and interfaces required an extensive planning an validation. Being the descent of Philae purely ballistic, the main driver for the orbital strategy was the capability to accurately control the position and velocity of Rosetta at Philae's separation. The resulting operations timeline had to merge this need of frequent orbit determination and control with the complexity of the ground segment and the inherent risk of problems when doing critical activities in short times. This paper describes the contribution of the Mission Control Centre (MOC) at the European Space Operations Centre (ESOC) to this

  5. LANL continuity of operations plan

    SciTech Connect

    Senutovitch, Diane M

    2010-12-22

    The Los Alamos National Laboratory (LANL) is a premier national security research institution, delivering scientific and engineering solutions for the nation's most crucial and complex problems. Our primary responsibility is to ensure the safety, security, and reliability of the nation's nuclear stockpile. LANL emphasizes worker safety, effective operational safeguards and security, and environmental stewardship, outstanding science remains the foundation of work at the Laboratory. In addition to supporting the Laboratory's core national security mission, our work advances bioscience, chemistry, computer science, earth and environmental sciences, materials science, and physics disciplines. To accomplish LANL's mission, we must ensure that the Laboratory EFs continue to be performed during a continuity event, including localized acts of nature, accidents, technological or attack-related emergencies, and pandemic or epidemic events. The LANL Continuity of Operations (COOP) Plan documents the overall LANL COOP Program and provides the operational framework to implement continuity policies, requirements, and responsibilities at LANL, as required by DOE 0 150.1, Continuity Programs, May 2008. LANL must maintain its ability to perform the nation's PMEFs, which are: (1) maintain the safety and security of nuclear materials in the DOE Complex at fixed sites and in transit; (2) respond to a nuclear incident, both domestically and internationally, caused by terrorist activity, natural disaster, or accident, including mobilizing the resources to support these efforts; and (3) support the nation's energy infrastructure. This plan supports Continuity of Operations for Los Alamos National Laboratory (LANL). This plan issues LANL policy as directed by the DOE 0 150.1, Continuity Programs, and provides direction for the orderly continuation of LANL EFs for 30 days of closure or 60 days for a pandemic/epidemic event. Initiation of COOP operations may be required to support an

  6. Propulsion Technology Lifecycle Operational Analysis

    NASA Technical Reports Server (NTRS)

    Robinson, John W.; Rhodes, Russell E.

    2010-01-01

    The paper presents the results of a focused effort performed by the members of the Space Propulsion Synergy Team (SPST) Functional Requirements Sub-team to develop propulsion data to support Advanced Technology Lifecycle Analysis System (ATLAS). This is a spreadsheet application to analyze the impact of technology decisions at a system-of-systems level. Results are summarized in an Excel workbook we call the Technology Tool Box (TTB). The TTB provides data for technology performance, operations, and programmatic parameters in the form of a library of technical information to support analysis tools and/or models. The lifecycle of technologies can be analyzed from this data and particularly useful for system operations involving long running missions. The propulsion technologies in this paper are listed against Chemical Rocket Engines in a Work Breakdown Structure (WBS) format. The overall effort involved establishing four elements: (1) A general purpose Functional System Breakdown Structure (FSBS). (2) Operational Requirements for Rocket Engines. (3) Technology Metric Values associated with Operating Systems (4) Work Breakdown Structure (WBS) of Chemical Rocket Engines The list of Chemical Rocket Engines identified in the WBS is by no means complete. It is planned to update the TTB with a more complete list of available Chemical Rocket Engines for United States (US) engines and add the Foreign rocket engines to the WBS which are available to NASA and the Aerospace Industry. The Operational Technology Metric Values were derived by the SPST Sub-team in the form of the TTB and establishes a database for users to help evaluate and establish the technology level of each Chemical Rocket Engine in the database. The Technology Metric Values will serve as a guide to help determine which rocket engine to invest technology money in for future development.

  7. Mission operations and command assurance: Instilling quality into flight operations

    NASA Technical Reports Server (NTRS)

    Welz, Linda L.; Witkowski, Mona M.; Bruno, Kristin J.; Potts, Sherrill S.

    1993-01-01

    Mission Operations and Command Assurance (MO&CA) is a Total Quality Management (TQM) task on JPL projects to instill quality in flight mission operations. From a system engineering view, MO&CA facilitates communication and problem-solving among flight teams and provides continuous process improvement to reduce the probability of radiating incorrect commands to a spacecraft. The MO&CA task has evolved from participating as a member of the spacecraft team to an independent team reporting directly to flight project management and providing system level assurance. JPL flight projects have benefited significantly from MO&CA's effort to contain risk and prevent rather than rework errors. MO&CA's ability to provide direct transfer of knowledge allows new projects to benefit from previous and ongoing flight experience.

  8. Mission operations and command assurance: Instilling quality into flight operations

    NASA Astrophysics Data System (ADS)

    Welz, Linda L.; Witkowski, Mona M.; Bruno, Kristin J.; Potts, Sherrill S.

    1993-03-01

    Mission Operations and Command Assurance (MO&CA) is a Total Quality Management (TQM) task on JPL projects to instill quality in flight mission operations. From a system engineering view, MO&CA facilitates communication and problem-solving among flight teams and provides continuous process improvement to reduce the probability of radiating incorrect commands to a spacecraft. The MO&CA task has evolved from participating as a member of the spacecraft team to an independent team reporting directly to flight project management and providing system level assurance. JPL flight projects have benefited significantly from MO&CA's effort to contain risk and prevent rather than rework errors. MO&CA's ability to provide direct transfer of knowledge allows new projects to benefit from previous and ongoing flight experience.

  9. 29 CFR 1926.1416 - Operational aids.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 8 2014-07-01 2014-07-01 false Operational aids. 1926.1416 Section 1926.1416 Labor... Operational aids. (a) The devices listed in this section (“listed operational aids”) are required on all... November 8, 2011. (b) Operations must not begin unless the listed operational aids are in proper...

  10. 29 CFR 1926.1416 - Operational aids.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 8 2013-07-01 2013-07-01 false Operational aids. 1926.1416 Section 1926.1416 Labor... Operational aids. (a) The devices listed in this section (“listed operational aids”) are required on all... November 8, 2011. (b) Operations must not begin unless the listed operational aids are in proper...

  11. 29 CFR 1926.1416 - Operational aids.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 8 2011-07-01 2011-07-01 false Operational aids. 1926.1416 Section 1926.1416 Labor... Operational aids. (a) The devices listed in this section (“listed operational aids”) are required on all... November 8, 2011. (b) Operations must not begin unless the listed operational aids are in proper...

  12. 29 CFR 1926.1416 - Operational aids.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 8 2012-07-01 2012-07-01 false Operational aids. 1926.1416 Section 1926.1416 Labor... Operational aids. (a) The devices listed in this section (“listed operational aids”) are required on all... November 8, 2011. (b) Operations must not begin unless the listed operational aids are in proper...

  13. 46 CFR 197.420 - Operations manual.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Operations manual. 197.420 Section 197.420 Shipping... GENERAL PROVISIONS Commercial Diving Operations Operations § 197.420 Operations manual. (a) The diving supervisor shall— (1) Provide an operations manual to the person-in-charge prior to commencement of...

  14. 46 CFR 197.420 - Operations manual.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Operations manual. 197.420 Section 197.420 Shipping... GENERAL PROVISIONS Commercial Diving Operations Operations § 197.420 Operations manual. (a) The diving supervisor shall— (1) Provide an operations manual to the person-in-charge prior to commencement of...

  15. 46 CFR 197.420 - Operations manual.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Operations manual. 197.420 Section 197.420 Shipping... GENERAL PROVISIONS Commercial Diving Operations Operations § 197.420 Operations manual. (a) The diving supervisor shall— (1) Provide an operations manual to the person-in-charge prior to commencement of...

  16. 46 CFR 197.420 - Operations manual.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Operations manual. 197.420 Section 197.420 Shipping... GENERAL PROVISIONS Commercial Diving Operations Operations § 197.420 Operations manual. (a) The diving supervisor shall— (1) Provide an operations manual to the person-in-charge prior to commencement of...

  17. 36 CFR 9.33 - Existing operations.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... MINERALS MANAGEMENT Non-Federal Oil and Gas Rights § 9.33 Existing operations. (a) Any person conducting... those operations pending a final decision on his plan of operations; Provided, That: (1) The operator... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Existing operations....

  18. Lunar Surface Mission Operations Scenario and Considerations

    NASA Technical Reports Server (NTRS)

    Arnold, Larissa S.; Torney, Susan E.; Rask, John Doug; Bleisath, Scott A.

    2006-01-01

    Planetary surface operations have been studied since the last visit of humans to the Moon, including conducting analog missions. Mission Operations lessons from these activities are summarized. Characteristics of forecasted surface operations are compared to current human mission operations approaches. Considerations for future designs of mission operations are assessed.

  19. Mail LOG: Program operating instructions

    NASA Technical Reports Server (NTRS)

    Harris, D. K.

    1979-01-01

    The operating instructions for the software package, MAIL LOG, developed for the Scout Project Automatic Data System, SPADS, are provided. The program is written in FORTRAN for the PRIME 300 computer system. The MAIL LOG program has the following four modes of operation: (1) INPUT - putting new records into the data base (2) REVISE - changing or modifying existing records in the data base (3) SEARCH - finding special records existing in the data base (4) ARCHIVE - store or put away existing records in the data base. The output includes special printouts of records in the data base and results from the INPUT and SEARCH modes. The MAIL LOG data base consists of three main subfiles: Incoming and outgoing mail correspondence; Design Information Releases and Releases and Reports; and Drawings and Engineering orders.

  20. Integrating research into operational practice.

    PubMed

    Ross, Alastair

    2015-08-01

    Research and development can be classified into three categories: technology adoption, technology extension, and knowledge and technology creation. In general, technology adoption is embedded in operational forensic science laboratory practice but the latter two categories require partnerships with industry and/or academia both to conduct the research and implement the outcomes. In a 2012 survey, Australian and New Zealand forensic science laboratories identified a number of 'roadblocks' to undertaking research and operationalizing research outcomes. These included insufficient time and funding, a lack of in-house research experience and the absence of a tangible research culture. Allied to this is that, increasingly, forensic science research is conducted in a 'commercial in confidence' environment and the outcomes are not readily or cost-effectively available to be integrated into operational forensic science laboratories. The paper is predominantly reflective of the current situation in Australia and New Zealand.

  1. The Mission Operations Planning Assistant

    NASA Technical Reports Server (NTRS)

    Schuetzle, James G.

    1987-01-01

    The Mission Operations Planning Assistant (MOPA) is a knowledge-based system developed to support the planning and scheduling of instrument activities on the Upper Atmospheric Research Satellite (UARS). The MOPA system represents and maintains instrument plans at two levels of abstraction in order to keep plans comprehensible to both UARS Principal Investigators and Command Management personnel. The hierarchical representation of plans also allows MOPA to automatically create detailed instrument activity plans from which spacecraft command loads may be generated. The MOPA system was developed on a Symbolics 3640 computer using the ZetaLisp and ART languages. MOPA's features include a textual and graphical interface for plan inspection and modification, recognition of instrument operational constraint violations during the planning process, and consistency maintenance between the different planning levels. This paper describes the current MOPA system.

  2. The mission operations planning assistant

    NASA Technical Reports Server (NTRS)

    Schuetzle, James G.

    1987-01-01

    The Mission Operations Planning Assistant (MOPA) is a knowledge-based system developed to support the planning and scheduling of instrument activities on the Upper Atmospheric Research Satellite (UARS). The MOPA system represents and maintains instrument plans at two levels of abstraction in order to keep plans comprehensible to both UARS Prinicpal Investigators and Command Management personnel. The hierarchical representation of plans also allows MOPA to automatically create detailed instrument activity plans from which spacecraft command loads may be generated. The MOPA system was developed on a Symbolics 3640 computer using the ZETALISP and ART languages. MOPA's features include a textual and graphical interface for plan inspection and modification, recognition of instrument operational constraint violations during the planning process, and consistency maintenance between the different planning levels. This paper describes the current MOPA system.

  3. NEP processing, operations, and disposal

    NASA Technical Reports Server (NTRS)

    Stancati, Mike

    1993-01-01

    Several recent studies by ASAO/NPO staff members at LeRC and by other organizations have highlighted the potential benefits of using Nuclear Electric Propulsion (NEP) as the primary transportation means for some of the proposed missions of the Space Exploration Initiative. These include the potential to reduce initial mass in orbit and Mars transit time. Modular NEP configurations also introduce fully redundant main propulsion to Mars flight systems adding several abort or fall back options not otherwise available. Recent studies have also identified mission operations, such as on orbital assembly, refurbishment, and reactor disposal, as important discriminators for propulsion system evaluation. This study is intended to identify and assess 'end-to-end' operational issues associated with using NEP for transporting crews and cargo between Earth and Mars. We also include some consideration of lunar cargo transfer as well.

  4. Integrating research into operational practice

    PubMed Central

    Ross, Alastair

    2015-01-01

    Research and development can be classified into three categories: technology adoption, technology extension, and knowledge and technology creation. In general, technology adoption is embedded in operational forensic science laboratory practice but the latter two categories require partnerships with industry and/or academia both to conduct the research and implement the outcomes. In a 2012 survey, Australian and New Zealand forensic science laboratories identified a number of ‘roadblocks’ to undertaking research and operationalizing research outcomes. These included insufficient time and funding, a lack of in-house research experience and the absence of a tangible research culture. Allied to this is that, increasingly, forensic science research is conducted in a ‘commercial in confidence’ environment and the outcomes are not readily or cost-effectively available to be integrated into operational forensic science laboratories. The paper is predominantly reflective of the current situation in Australia and New Zealand PMID:26101286

  5. N Reactor operational safety summary

    SciTech Connect

    Franz, G.R.; Quapp, W.J.; Ogden, D.M.

    1988-08-01

    This report is a safety summary of the N Reactor. Beginning with its conceptual design in the mid-1950`s, and throughout its 23 years of operation, continuous efforts have been made to ensure safe N Reactor operation and protection of the public health and safety. The N Reactor Updated Safety Analysis Report, completed in 1978(UNC1978), and its subsequent amendments document the safety bases of N Reactor. Following the April 1986 Chernobyl accident in the Soviet Union, a major effort to confirm N Reactor safety and further increase its safety margin was initiated. This effort, called the Safety Enhancement Program, reassessed the N Reactor using the latest accepted analysis techniques and commercial light-water reactor guidelines, where applicable. 122 refs., 38 figs., 10 tabs.

  6. Operational options for green ships

    NASA Astrophysics Data System (ADS)

    Sherbaz, Salma; Duan, Wenyang

    2012-09-01

    Environmental issues and rising fuel prices necessitate better energy-efficiency in all sectors. The shipping industry is one of the major stakeholders, responsible for 3% of global CO2 emissions, 14%-15% of global NO X emissions, and 16% of global SO X emissions. In addition, continuously rising fuel prices are also an incentive to focus on new ways for better energy-effectiveness. The green ship concept requires exploring and implementing technology on ships to increase energy-efficiency and reduce emissions. Ship operation is an important topic with large potential to increase cost-and-energy-effectiveness. This paper provided a comprehensive review of basic concepts, principles, and potential of operational options for green ships. The key challenges pertaining to ship crew i.e. academic qualifications prior to induction, in-service training and motivation were discussed. The author also deliberated on remedies to these challenges.

  7. Tools for Asteroid Regolith Operations

    NASA Technical Reports Server (NTRS)

    Mueller, Robert P.; Calle, Carlos I.; Mantovani, James G.

    2013-01-01

    This RFI response is targeting Area 5. Crew Systems for Asteroid Exploration: concepts for lightweight and low volume robotic and extra-vehicular activity (EVA) systems, such as space suits, tools, translation aids, stowage containers, and other equipment.The NASA KSC Surface Systems Office, Granular Mechanics and Regolith Operations (GMRO) Lab and the Electrostatics Surface Physics Lab (ESPL) are dedicated to developing technologies for operating in regolith environments on target body surfaces. We have identified two technologies in our current portfolio that are highly relevant and useful for crews that will visit a re-directed asteroid in Cis-Lunar Space. Both technologies are at a high TRL of 56 and could be rapidly implemented in time for an ARM mission in this decade.

  8. Operating room of the future.

    PubMed

    Bharathan, Rasiah; Aggarwal, Rajesh; Darzi, Ara

    2013-06-01

    Development of surgical care in the 21st century is increasingly dependent on demonstrating safety, efficacy and cost effectiveness. Over the past 2 decades, the potential role of simulation in surgery has been explored with encouraging results; this can now be linked to direct improvement in the quality of care provision. Computer-assisted surgical platforms, such as robotic surgery, offer us the versatility to embrace a host of technical and technological developments. Rapid development in nanomedicine will expand the limits of operative performance through improved navigation and surgical precision. Integration of the multiple functions of the future operating room will be essential in optimising resource management. The key to bringing about the necessary paradigm shift in the design and delivery of modern surgical care is to appreciate that we now function in an information age, where the integrity of processes is driven by apt data management.

  9. Chernobyl operators: criminals or victims?

    PubMed

    Munipov, V M

    1992-10-01

    The blame for the 1986 Chernobyl disaster has been variously attributed to the operating personnel, the plant management, the design of the reactor, and the lack of adequate safety information in the Soviet nuclear industry. This paper considers a number of design faults, operational shortcomings and human errors that combined in the accident. It examines the sequence of events leading up to the accident, design problems in the reactor and cooling rods, and the course of the accident itself. It considers the ergonomics aspects, and expresses the view that the main cause of the accident was inadequate human-machine interaction. Finally, it stresses the continuing inadequacies of the Soviet nuclear system, and emphasizes that unless the ergonomics lessons are fully learned, a similar disaster could still occur.

  10. Diffraction operators in paraxial approach

    NASA Astrophysics Data System (ADS)

    Lasso, William; Navas, Marianela; Añez, Liz; Urdaneta, Romer; Díaz, Leonardo; Torres, César O.

    2014-07-01

    Nowadays, research in the field of science education points to the creation of alternative ways of teaching contents encouraging the development of more elaborate reasoning, where a high degree of abstraction and generalization of scientific knowledge prevails. On that subject, this research shows a didactic alternative proposal for the construction of Fresnel and Fraunhoffer diffraction concepts applying the Fourier transform technique in the study of electromagnetic waves propagation in free space. Curvature transparency and Fourier sphere operators in paraxial approximation are used in order to make the usual laborious mathematical approach easier. The main result shows that the composition of optic metaxial operators results in the discovery of a simpler way out of the standard electromagnetic wave propagation in free space between a transmitter and a receptor separated from a given distance. This allows to state that the didactic proposal shown encourages the construction of Fresnel and Fraunhoffer diffraction concepts in a more effective and easier way than the traditional teaching.

  11. Remote monitoring of pipeline operations

    SciTech Connect

    Bost, R.C.; White, D.

    1995-12-31

    The demands for monitoring of pipeline operations have recently increased greatly due to new regulatory requirements. Most companies rely upon conventional System Control and Data Acquisition (SCADA) system architecture to meet their needs. Current systems are often plagued by limited data conversion and processing capacity at the workstations. A state-of-the-art Data Acquisition Node (DAN) that relieves the workstation of much of its workload is described in this paper. Use of this DAN may eliminate the need for installing completely new systems. It facilitates marrying foreign devices to existing operation monitoring systems to satisfy new regulatory requirements. The DAN allows a system to utilize commercial communications satellites or other communication networks and real-time, object oriented programming and different devices and data requirements without the necessity of custom software development.

  12. Space Station Freedom operations planning

    NASA Technical Reports Server (NTRS)

    Accola, Anne L.; Keith, Bryant

    1989-01-01

    The Space Station Freedom program is developing an operations planning structure which assigns responsibility for planning activities to three tiers of management. The strategic level develops the policy, goals and requirements for the program over a five-year horizon. Planning at the tactical level emphasizes program integration and planning for a two-year horizon. The tactical planning process, architecture, and products have been documented and discussed with the international partners. Tactical planning includes the assignment of user and system hardware as well as significant operational events to a time increment (the period of time from the arrival of one Shuttle to the manned base to the arrival of the next). Execution-level planning emphasizes implementation, and each organization produces detailed plans, by increment, that are specific to its function.

  13. Fermilab SRF cryomodule operational experience

    SciTech Connect

    Martinez, A.; Klebaner, A.L.; Theilacker, J.C.; DeGraff, B.D.; White, M.; Johnson, G.S.; /Fermilab

    2011-06-01

    Fermi National Accelerator Laboratory is constructing an Advanced Accelerator Research and Development facility at New Muon Lab. The cryogenic infrastructure in support of the initial phase of the facility consists of two Tevatron style standalone refrigerators, cryogenic distribution system as well as an ambient temperature pumping system to achieve 2K operations with supporting purification systems. During this phase of the project a single Type III plus 1.3 GHz cryomodule was installed, cooled and tested. Design constraints of the cryomodule required that the cryomodule individual circuits be cooled at predetermined rates. These constraints required special design solutions to achieve. This paper describes the initial cooldown and operational experience of a 1.3 GHz cryomodule using the New Muon Lab cryogenic system.

  14. Recovering entanglement by local operations

    SciTech Connect

    D’Arrigo, A.; Lo Franco, R.; Benenti, G.; Paladino, E.; Falci, G.

    2014-11-15

    We investigate the phenomenon of bipartite entanglement revivals under purely local operations in systems subject to local and independent classical noise sources. We explain this apparent paradox in the physical ensemble description of the system state by introducing the concept of “hidden” entanglement, which indicates the amount of entanglement that cannot be exploited due to the lack of classical information on the system. For this reason this part of entanglement can be recovered without the action of non-local operations or back-transfer process. For two noninteracting qubits under a low-frequency stochastic noise, we show that entanglement can be recovered by local pulses only. We also discuss how hidden entanglement may provide new insights about entanglement revivals in non-Markovian dynamics.

  15. Local Algebras of Differential Operators

    NASA Astrophysics Data System (ADS)

    Church, P. T.; Timourian, J. G.

    2002-05-01

    There is an increasing literature devoted to the study of boundary value problems using singularity theory. The resulting differential operators are typically Fredholm with index 0, defined on infinite-dimensional spaces, and they have often led to folds, cusps, and even higher-order Morin singularities. In this paper we develop some of the local algebras of germs of such differential Fredholm operators, extending the theory of the finite-dimensional case. We apply this work to nonlinear elliptic boundary value problems: in particular, we make further progress on a question proposed and initially studied by Ruf [1999, J. Differential Equations 151, 111-133]. We also make comments on several problems raised by others.

  16. Reactor operation environmental information document

    SciTech Connect

    Haselow, J.S.; Price, V.; Stephenson, D.E.; Bledsoe, H.W.; Looney, B.B.

    1989-12-01

    The Savannah River Site (SRS) produces nuclear materials, primarily plutonium and tritium, to meet the requirements of the Department of Defense. These products have been formed in nuclear reactors that were built during 1950--1955 at the SRS. K, L, and P reactors are three of five reactors that have been used in the past to produce the nuclear materials. All three of these reactors discontinued operation in 1988. Currently, intense efforts are being extended to prepare these three reactors for restart in a manner that protects human health and the environment. To document that restarting the reactors will have minimal impacts to human health and the environment, a three-volume Reactor Operations Environmental Impact Document has been prepared. The document focuses on the impacts of restarting the K, L, and P reactors on both the SRS and surrounding areas. This volume discusses the geology, seismology, and subsurface hydrology. 195 refs., 101 figs., 16 tabs.

  17. Constellation Program DOLILU Operational Concepts

    NASA Technical Reports Server (NTRS)

    Puperi, Daniel S.

    2010-01-01

    Day of launch I-load uplink (DOLILU) and a corresponding day of launch trajectory and loads evaluation are being considered for the Constellation Program. Abort effectiveness, controllability, and ascent structural loads all improve with some of the flight software I-loads designed using current measured atmospheric conditions. While a generalized DOLILU framework has been assumed, specific implementation details have not yet been discussed in depth nor documented. Operational improvements can be leveraged from Space Shuttle experience to create a more cost-effective and streamlined process while maintaining the integrity of the results. A preliminary discussion of DOLILU design methodology is presented followed by some suggestions and implementation details for Constellation Program DOLILU operations

  18. Damping measurements using operational data

    SciTech Connect

    James, G.H.; Carne, T.G.; Veers, P.S.

    1996-08-01

    The authors have measured modal damping using strain-gauge data from an operating wind turbine. This new technique for measuring modal damping is easier and less expensive than previously used methods. Auto-correlation and cross-correlation functions of the strain-gauge data have been shown to consist of decaying sinusoids which correspond to the modal frequencies and damping ratios of the wind turbine. The authors have verified the method by extracting damping values from an analytically generated data set. Actual operating response data from the DOE/Sandia 34-m Test Bed has been used to calculate modal damping ratios as a function of rotor rotation rate. This capability will allow more accurate fatigue life prediction and control.

  19. Damping measurements using operational data

    SciTech Connect

    James, G.H.; Carne, T.G.; Veers, P.S.

    1991-01-01

    We have measured modal damping using strain-gauge data from an operating wind turbine. Previously, such measurements were difficult and expensive. Auto-correlation and cross-correlation functions of the strain-gauge data have been shown to consist of decaying sinusoids which correspond to the modal frequencies and damping ratios of the wind turbine. We have verified the method by extracting damping values from an analytically generated data set. Actual operating response data from the DOE/Sandia 34-meter Test Bed has been used to calculate modal damping ratios as a function of rotor rotation rate. This capability will allow more accurate fatigue life prediction and control. 16 refs., 3 figs., 2 tabs.

  20. The Interplanetary Pioneers. Volume 3: Operations

    NASA Technical Reports Server (NTRS)

    Corliss, W. R.

    1972-01-01

    The operational aspects of the Pioneer program are described. The phases of the program discussed include: prelaunch operations, launch to DSS acquisition, near-earth operations, nominal and extended cruise, and scientific results.